Urban Rail Supporting Technology Program Fiscal Year 1975 - Year End Summary

DOT National Transportation Integrated Search

1975-12-01

The Urban Rail Supporting Technology Program is described for the 1975 fiscal year period. Important areas include program management, technical support and applications engineering, facilities development, test and evaluation, and technology develop...

Superfund and Technology Liaison Program Fact Sheet

EPA Pesticide Factsheets

The Superfund and Technology Liaison (STL) Program was established to facilitate regional access to ORD laboratories, provide technical support, and assist with the integration of science and technology into decision-making for hazardous waste programs.

Computing, Information and Communications Technology (CICT) Website

NASA Technical Reports Server (NTRS)

Hardman, John; Tu, Eugene (Technical Monitor)

2002-01-01

The Computing, Information and Communications Technology Program (CICT) was established in 2001 to ensure NASA's Continuing leadership in emerging technologies. It is a coordinated, Agency-wide effort to develop and deploy key enabling technologies for a broad range of mission-critical tasks. The NASA CICT program is designed to address Agency-specific computing, information, and communications technology requirements beyond the projected capabilities of commercially available solutions. The areas of technical focus have been chosen for their impact on NASA's missions, their national importance, and the technical challenge they provide to the Program. In order to meet its objectives, the CICT Program is organized into the following four technology focused projects: 1) Computing, Networking and Information Systems (CNIS); 2) Intelligent Systems (IS); 3) Space Communications (SC); 4) Information Technology Strategic Research (ITSR).

Selected Technical Spin Offs from the Space Program

NASA Technical Reports Server (NTRS)

Gilmore, H. L.

1970-01-01

The report describes some of the problems which the National Aeronautics and Space Administration has encountered in getting people to understand how the general public has profited from the technical discoveries of the space program. Next, it describes NASA's Technology Utilization Program and comments on it. It then describes some of the many spin-offs from the space program. These include examples from management technology, communications, aeronautics, medicine, fabrics highway safety, and weather forecasting.

15 CFR 295.6 - Criteria for selection.

Code of Federal Regulations, 2011 CFR

2011-01-01

... proposal will be funded unless the Program determines that it has scientific and technological merit and... does not have an adequate technical and commercialization plan. (a) Scientific and technological merit... innovation, the technical approach, major technical hurdles, the attendant risks, and clearly establish...

Vocational and Technical Education Performance Standards and Competencies.

ERIC Educational Resources Information Center

Connecticut State Board of Education, Hartford.

These Connecticut vocational and technical performance standards and competencies are a guide for overall quality attainment in these seven vocational and technical program areas: agricultural science technology education; business and finance technology education; cooperative work education; family and consumer sciences education; marketing…

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

Technical writing in the radiologic technology curriculum.

PubMed

Bell, R

1979-01-01

Although courses in technical writing are no longer suggested in the Curriculum Guide for Programs in Radiologic Technology, the writer believes that writing is essential to the growth of the profession and development of the professional. Emphasis is placed on some of the benefits that accrue to students who are exposed to technical writing as part of their technology curriculum.

Local Technical Assistance Program Field Manual

DOT National Transportation Integrated Search

1997-02-01

The FHWA Local Technical Assistance Program (LTAP) provides technology transfer products to local highway departments. One of the most valuable and well-received resources of the program, the LTAP (or T 2 ) centers, have proven themselves invaluable ...

On-line Naval Engineering Skills Supplemental Training Program

DTIC Science & Technology

2010-01-01

Defense Technical University ( DTU ), the technical content for courses would have to be provided by the Naval technical authorities...of technological knowledge related to design engineering such as the DTU , or expanded within the mission scope of an existing organization such as...management program as a training tool for naval design engineers such as the DTU or a technical extension of the DAU program for acquisition training

Computer Programs for Technical Communicators: The Compelling Curriculum. Working Draft.

ERIC Educational Resources Information Center

Selfe, Cynthia L.; Wahlstrom, Billie J.

A series of computer programs have been developed at Michigan Technological University for use with technical writing and technical communications classes. The first type of program in the series, CURIE II, includes process-based modules, each of which corresponds to one of the following assignments: memoranda, resumes, feasibility reports,…

Science, Technology, and Communication: Program Design in the Past, Present, and Future. Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (26th, Santa Fe, New Mexico, October 14-16, 1999).

ERIC Educational Resources Information Center

Rude, Carolyn, Ed.

Based on the theme of the past, present, and future of science, technology, and communication programs, this proceedings presents 49 papers delivered at the 1999 annual meeting of the Council for Programs in Technical and Scientific Communication (CPTSC). Papers in the proceedings are divided into 12 subsections: The Shape of Programs: Past,…

Dental Laboratory Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard dental laboratory technology curriculum for both diploma programs and associate degree programs in technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the dental laboratory technology field. The general information section contains the…

A Comparison of the Career and Technical Education Programs in a US Community College and a Chinese Institution

ERIC Educational Resources Information Center

Hou, Harry

2010-01-01

This research study explores and compares the career and technical education programs offered in a US community college and the vocational/career and technology education programs offered in a comparable Chinese postsecondary institution. The study sought to find positive transferable characteristics of the career and technical education programs…

The NASA "PERS" Program: Solid Polymer Electrolyte Development for Advanced Lithium-Based Batteries

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Bennett, William R.

2007-01-01

In fiscal year 2000, The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The ultimate objective of this development program, which was referred to as the Polymer Energy Rechargeable System (PERS), was to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. Out of a total of 38 proposals received in response to a NASA Research Announcement (NRA) solicitation, 18 proposals (13 contracts and 5 grants) were selected for initial award to address these technical challenges. Brief summaries of technical approaches, results and accomplishments of the PERS Program development efforts are presented. With Agency support provided through FY 2004, the PERS Program efforts were concluded in 2005, as internal reorganizations and funding cuts resulted in shifting programmatic priorities within NASA. Technically, the PERS Program participants explored, to various degrees over the lifetime of the formal program, a variety of conceptual approaches for developing and demonstrating performance of a viable advanced solid polymer electrolyte possessing the desired attributes, as well as several participants addressing all components of an integrated cell configuration. Programmatically, the NASA PERS Program was very successful, even though the very challenging technical goals for achieving a viable solid polymer electrolyte material or the overall envisioned long-term, program objectives were not met due to funding reductions. The NASA PERS Program provided research opportunities and generated and disseminated a wealth of new scientific knowledge and technical competencies within the polymer electrolyte area.

Surgical Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This surgical technology program guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a surgical technology program. The program guide is designed to relate primarily to the development of those skills needed by individuals in the field to provide services in the…

Defense Technical Information Center (DTIC) - Its role in the USAF Scientific and Technical Information Program

NASA Technical Reports Server (NTRS)

Kuhn, Allan D.

1991-01-01

The Defense Technical Information Center (DTIC), the central repository for DOD scientific and technical information concerning studies and research and engineering efforts, is discussed. The present makeup of DTIC is described and its functions in producing technical reports and technical report bibliographies are examined. DTIC's outreach services are reviewed, as are its DTIC information and technology transfer programs. DTIC's plans for the year 2000 and its relation to the mission of the U.S. Air Force, including the Air Force's STINFO program, are addressed.

Communication Requirements of Employees of Business and Industry Represented by Areas of Technological Study at Southern Maine Vocational Technical Institute.

ERIC Educational Resources Information Center

Cary, Penny J.; Sweeney, Kevin F.

A study examined the need and demand for communication skills for employees in the technical fields for which Southern Maine Vocational Technical Institute offers programs of academic preparation. Two members of the Institute's English Department interviewed representatives of organizations that have hired technical program graduates. Further…

Teaching Leadership in Technical Programs at Community Colleges

ERIC Educational Resources Information Center

DeBlauw, Amanda L.; Daugherty, Jenny L.

2017-01-01

This descriptive study explored how community colleges are teaching leadership in technical programs. Leadership education curricular offerings were identified via a survey and selected programs reviewed. 68 Deans, Directors, or Chairpersons of a Business, Management, or Technology program completed the survey, representing 61 community colleges.…

1998 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

McMillin, S. Naomi (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1998 Aerodynamic Performance Technical Review on February 9-13, in Los Angeles, California. The review was designed to bring together NASA and industry HighSpeed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of. Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, and Flight Controls. The review objectives were to: (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working HSCT aerodynamics. In particular, single and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program.

1998 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift

NASA Technical Reports Server (NTRS)

McMillin, S. Naomi (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1998 Aerodynamic Performance Technical Review on February 9-13, in Los Angeles, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program.

1998 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

McMillin, S. Naomi (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1998 Aerodynamic Performance Technical Review on February 9-13, in Los Angeles, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working HSCT aerodynamics. In particular, single and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program.

Cooperative and Concurrent Enrollment and College Retention

ERIC Educational Resources Information Center

Foster, Regina

2010-01-01

Oklahoma has a unique system of high schools, technology centers and community colleges that work together to enable students to receive education in technical areas. Given Oklahoma's shortage of technical degree recipients, the Cooperative Alliance Program (CAP) was developed to encourage additional students to begin technical programs during…

Teaching Technology with Technology. An Off-the-Shelf Robotics Course Builds Technical Center Enrollment.

ERIC Educational Resources Information Center

Hannemann, Jim; Rice, Thomas R.

1991-01-01

At the Oakland Technical Center, which provides vocational programs for nine Michigan high schools, a one-semester course in Foundations of Technology Systems uses a computer-simulated manufacturing environment to teach applied math, science, language arts, communication skills, problem solving, and teamwork in the context of technology education.…

Avionics Maintenance Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents the avionics maintenance technology curriculum for technical institutes in Georgia. The general information section contains the following for both the diploma program and the associate degree program: purpose and objectives; program description, including admissions, typical job titles, and accreditation and…

Women and Technical Professions. Leonardo da Vinci Series: Good Practices.

ERIC Educational Resources Information Center

Commission of the European Communities, Brussels (Belgium). Directorate-General for Education and Culture.

This document profiles programs for women in technical professions that are offered through the European Commission's Leonardo da Vinci program. The following programs are profiled: (1) Artemis and Diana (vocational guidance programs to help direct girls toward technology-related careers); (2) CEEWIT (an Internet-based information and…

Analysis of Teachers' Adoption of Technology for Use in Instruction in Seven Career and Technical Education Programs

ERIC Educational Resources Information Center

Kotrlik, Joe W.; Redmann, Donna H.

2009-01-01

This study addressed utilization of technology in instruction by secondary career and technical education (CTE) teachers in seven program areas in Louisiana. A stratified random sample was utilized, with 539 teachers responding to the survey after three data collection efforts. The data were determined to be representative of all CTE teachers in…

1993 UPDATE OF THE U.S. ENVIRONMENTAL PROTECTION AGENCY'S SITE EMERGING TECHNOLOGY PROGRAM

EPA Science Inventory

The Emerging Technology Program (ETP), part of the U.S. EPA`s Superfund Innovative Technology Evaluation (SITE) Program, is continuing to create an environment where technical innovation can accelerate into field and commercial applications for treatment of hazardous waste sites....

Space Alliance Technology Outreach Program

NASA Technical Reports Server (NTRS)

2005-01-01

Space Alliance Technology Outreach Program (SATOP), will provide technical assistance to small businesses through the contribution of time and expertise from Space Alliance Partners and support the development and expansion of technology business incubation programs in Florida and New York. A summary of these accomplishments are given.

OVERVIEW OF THE MINE WASTE TECHNOLOGY PROGRAM; INTERAGENCY COORDINATION MEETING ON MINING

EPA Science Inventory

The Mine Waste Technology Program is a Congressionally-mandated research program jointly administered by the EPA Office of Research and Development (for technical direction) and by the DoE Western Environmental Technology Office (administrative direction). The goal of the resear...

15 CFR 296.1 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General... high-risk, high-reward research in areas of critical national need within NIST's areas of technical...

15 CFR 296.1 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General... high-risk, high-reward research in areas of critical national need within NIST's areas of technical...

15 CFR 296.1 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General... high-risk, high-reward research in areas of critical national need within NIST's areas of technical...

15 CFR 296.1 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General... high-risk, high-reward research in areas of critical national need within NIST's areas of technical...

15 CFR 296.1 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM General... high-risk, high-reward research in areas of critical national need within NIST's areas of technical...

NASA's Commercial Communication Technology Program

NASA Technical Reports Server (NTRS)

Bagwell, James W.

1998-01-01

Various issues associated with "NASA's Commercial Communication Technology Program" are presented in viewgraph form. Specific topics include: 1) Coordination/Integration of government program; 2) Achievement of seamless interoperable satellite and terrestrial networks; 3) Establishment of program to enhance Satcom professional and technical workforce; 4) Precompetitive technology development; and 5) Effective utilization of spectrum and orbit assets.

Development of a Curriculum in Laser Technology. Final Report.

ERIC Educational Resources Information Center

Wasserman, William J.

A Seattle Central Community College project visited existing programs, surveyed need, and developed a curriculum for a future program in Laser-Electro-Optics (LEO) Technology. To establish contacts and view successful programs, project staff made visits to LEO technology programs at San Jose City College and Texas State Technical Institute, Center…

SANITARY ENGINEERING TECHNOLOGY TRAINING, REPORT ON A PROGRAM DEVELOPED AT THE FAYETTEVILLE TECHNICAL INSTITUTE IN NORTH CAROLINA TO MEET A NATIONAL NEED.

ERIC Educational Resources Information Center

BOUDREAU, HOWARD E.; PURCELL, CHARLES A.

THE FAYETTEVILLE TECHNICAL INSTITUTE IN NORTH CAROLINA ESTABLISHED ITS PROGRAM IN SANITARY ENGINEERING TECHNOLOGY IN 1964, WITH ITS FIRST GRADUATING CLASS PLANNED FOR SPRING 1966. IN COOPERATION WITH THE CURRICULUM LABORATORY AND THE STATE DEPARTMENT OF COMMUNITY COLLEGES, AN ADVISORY COMMITTEE WAS FORMED, MADE UP OF SPECIALISTS IN MANY AREAS OF…

A Proposal for the Education based on the Information Technology in Technical High Schools, Linking Together Web Programming and Microcontroller

NASA Astrophysics Data System (ADS)

Shinozaki, Kenichi; Yanaru, Torao

Recently, IT (Information Technology) have rapidly revolved and penetrated into the usual human life, with such as the household appliances and the mobile devices. Considering this strong change of social environment, what technology is introduced to satisfy the present educational needs and how to develop the teaching system is very important. Then in this paper, we describe the developed web-teaching material that links Xport, an embedded device server, with the control system using microcontroller technology. In the classes, we have implemented the lessons that utilize this system in the following subjects : programming technology, hardware technology, electronic circuit and practical training. Furthermore, because of high availability of the developed system through internet, it is also useful for the education on science and technical arts in general high schools or in junior high schools as well as in technical high schools.

Director's discretionary fund

NASA Technical Reports Server (NTRS)

1993-01-01

This technical memorandum contains brief technical papers describing research and technology development programs sponsored by the ARC Director's Discretionary Fund during fiscal year 1992 (Oct. 1991 through Sep. 1992). An appendix provides administrative information for each of the 45 sponsored research programs.

Urban Rail Supporting Technology Program - Fiscal Year 1973 - Year-End Summary

DOT National Transportation Integrated Search

1974-01-01

The Urban Rail Supporting Technology Program, being conducted for the Department of Transportation Urban Mass Transportation Administration (UMTA) is described for the 1973 Fiscal Year period. Major areas covered include program management, technical...

Helicopter Dynamic Performance Program. Volume 2. User’s Manual

DTIC Science & Technology

1980-07-01

Technologies Corporation Stratford, Connecticut 06602 July 1980 Final Report / • ., . Approved for public release; I distribution unlimited. ; A - Prepared...for : APPLIED TECHNOLOGY LABORATORY U. S. ARMY RESEARCH AND TECHNOLOGY LABORATORIES (AVRADCOM) Fort Eustis, Va. 23604 80 8 27 D APPLIED TECHNOLOGY ... Technology Division. Technic31 review of this report was also pro- vided by Messrs. W_ A. Pleasants of Design Integration and Analysis Technical Area

Let's get technical: Enhancing program evaluation through the use and integration of internet and mobile technologies.

PubMed

Materia, Frank T; Miller, Elizabeth A; Runion, Megan C; Chesnut, Ryan P; Irvin, Jamie B; Richardson, Cameron B; Perkins, Daniel F

2016-06-01

Program evaluation has become increasingly important, and information on program performance often drives funding decisions. Technology use and integration can help ease the burdens associated with program evaluation by reducing the resources needed (e.g., time, money, staff) and increasing evaluation efficiency. This paper reviews how program evaluators, across disciplines, can apply internet and mobile technologies to key aspects of program evaluation, which consist of participant registration, participant tracking and retention, process evaluation (e.g., fidelity, assignment completion), and outcome evaluation (e.g., behavior change, knowledge gain). In addition, the paper focuses on the ease of use, relative cost, and fit with populations. An examination on how these tools can be integrated to enhance data collection and program evaluation is discussed. Important limitations of and considerations for technology integration, including the level of technical skill, cost needed to integrate various technologies, data management strategies, and ethical considerations, are highlighted. Lastly, a case study of technology use in an evaluation conducted by the Clearinghouse for Military Family Readiness at Penn State is presented and illustrates how technology integration can enhance program evaluation. Copyright © 2016 Elsevier Ltd. All rights reserved.

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1999 Aerodynamic Performance Technical Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in the areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High Lift, and Flight Controls. The review objectives were to: (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working on HSCT aerodynamics. In particular, single and midpoint optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented, along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program. This Volume 1/Part 1 publication covers configuration aerodynamics.

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1999 Aerodynamic Performance Technical Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in the areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among die scientists and engineers working on HSCT aerodynamics. In particular, single and midpoint optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented, along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program. This Volume 2/Part 2 publication covers the tools and methods development session.

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1999 Aerodynamic Performance Technical Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in the areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working on HSCT aerodynamics. In particular, single and midpoint optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented, along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program. This Volume 1/Part 2 publication covers the design optimization and testing sessions.

Administrative Office Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency (ITAC) profile for administrative office technology, which is a comprehensive listing of 58 occupational skill competencies deemed essential for Ohio graduates of programs in office technology. The document begins with an introduction to the ITAC system, a list of…

Civil Engineering Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents civil engineering technology curriculum for technical institutes in Georgia. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification; and curriculum model, including standard curriculum sequence and…

California four cities program, 1971 - 1973. [aerospace-to-urban technology application

NASA Technical Reports Server (NTRS)

Macomber, H. L.; Wilson, J. H.

1974-01-01

A pilot project in aerospace-to-urban technology application is reported. Companies assigned senior engineering professionals to serve as Science and Technology Advisors to participating city governments. Technical support was provided by the companies and JPL. The cities, Anaheim, Fresno, Pasadena, and San Hose, California, provided the working environment and general service support. Each city/company team developed and carried out one or more technical or management pilot projects together with a number of less formalized technology efforts and studies. An account and evaluation is provided of the initial two-year phase of the program.

2012 DOE Vehicle Technologies Program Annual Merit Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

A Research Program in Computer Technology. 1987 Annual Technical Report

DTIC Science & Technology

1990-07-01

TITLE (Indcle Security Clanificstion) 1987 Annual Technical Report: *A Research Program in Computer Technology (Unclassified) 12. PERSONAL AUTHOR(S) IS...distributed processing, survivable networks 17. NCE: distributed processing, local networks, personal computers, workstation environment 18. SC Dev...are the auw’iors and should not be Interpreted as representIng the official opinion or policy of DARPA, the U.S. Government, or any person or agency

SITE PROGRAM EVALUATION OF THE SONOTECH PULSE COMBUSTION BURNER TECHNOLOGY - TECHNICAL RESULTS

EPA Science Inventory

A series of demonstration tests was performed at the Environmental Protection Agency's (EPA's) Incineration Research Facility (IRF) under the Superfund Innovative Technology Evaluation (SITE) program. These tests, twelve in all, evaluated a pulse combustion burner technology dev...

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

The High-Speed Research Program sponsored the NASA High-Speed Research Program Aerodynamic Performance Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of: Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization) and High-Lift. The review objectives were to: (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. The HSR AP Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas within the airframe element of the HSR Program. This Volume 2/Part 1 publication presents the High-Lift Configuration Development session.

Automotive Technologies. State Competency Profile.

ERIC Educational Resources Information Center

Ohio Board of Regents, Columbus.

This document, which lists the technical automotive technologies competencies identified by representatives from business, industry, and labor as well as technical educators throughout Ohio, is intended to assist individuals and organizations in developing college tech prep programs that will prepare students from secondary through post-secondary…

Theme: Trends and Issues Affecting the Future of Agricultural Education.

ERIC Educational Resources Information Center

Agricultural Education Magazine, 2000

2000-01-01

Articles discuss trends and issues in agricultural education, community and technical colleges, career/technical studies, Australian agriculture, agricultural science and technology programs in urban areas, genetic engineering, the impact of changing technologies on agricultural education, volunteers, and performance-based assessment. (JOW)

The Berry Informational Technology (B.I.T.S.) Student Work Program: An Effective Environment for Collaborative Learning, Leadership, Technological Training, and Certification.

ERIC Educational Resources Information Center

Cornelius, Amy; Macaluso, Paul

The Berry Informational Technology (B.I.T.S.) program at Berry College (Georgia) is an apprenticeship opportunity associated with student work. The program gives students the opportunity to seek technological training in areas, such as building computer systems, trouble-shooting, networking, Web development, and user and technical support. In…

A Qualitative Study of African American Women in Engineering Technology Programs in Community Colleges

ERIC Educational Resources Information Center

Blakley, Jacquelyn

2016-01-01

This study examined the experiences of African American women in engineering technology programs in community colleges. There is a lack of representation of African American women in engineering technology programs throughout higher education, especially in community/technical colleges. There is also lack of representation of African American…

Status of the NASA YF-12 Propulsion Research Program

NASA Technical Reports Server (NTRS)

Albers, J. A.

1976-01-01

The YF-12 research program was initiated to establish a technology base for the design of an efficient propulsion system for supersonic cruise aircraft. The major technology areas under investigation in this program are inlet design analysis, propulsion system steady-state performance, propulsion system dynamic performance, inlet and engine control systems, and airframe/propulsion system interactions. The objectives, technical approach, and status of the YF-12 propulsion program are discussed. Also discussed are the results obtained to date by the NASA Ames, Lewis, and Dryden research centers. The expected technical results and proposed future programs are also given. Propulsion system configurations are shown.

Cobra Strikes! High-Performance Car Inspires Students, Markets Program

ERIC Educational Resources Information Center

Jenkins, Bonita

2008-01-01

Nestled in the Lower Piedmont region of upstate South Carolina, Piedmont Technical College (PTC) is one of 16 technical colleges in the state. Automotive technology is one of its most popular programs. The program features an instructive, motivating activity that the author describes in this article: building a high-performance car. The Cobra…

Report of the Defense Science Board Task Force on National Aero-Space Plane (NASP) Program

NASA Technical Reports Server (NTRS)

1992-01-01

Six years ago, the Defense Science Board (DSB) initiated a review of the concept, technical basis, program content, and missions of the National Aerospace Plane (NASP) program. The report was completed in Sep. 1988, and the recommendations contributed to strengthening the technical efforts in the NASP program. Since then, substantial technological progress has been made in the technology development phase (Phase 2) of the program. Phase 2 of the program is currently scheduled to end in late Fiscal Year 1993, with a decision whether to proceed to the experimental flight vehicle phase (Phase 3) to be made at that time. This decision will be a very significant one for the Department of Defense (DoD) and the National Aeronautics and Space Administration (NASA). In February of this year, the DSB was chartered to revisit the NASP program to assess the degree to which the many technical challenges of the program have been resolved, or are likely to be resolved by the end of Phase 2.

Mine Burial Assessment State-of the Art in Prediction and Modeling Workshop and Initiation of Technical Program

DTIC Science & Technology

2000-09-30

Burial Assessment State-of-the Art Science , Technology, and Modeling. A Review of Coastal Research, Modeling, and Naval Operational Needs in Shallow Water...the ONR Mine Burial Prediction Program are summarized below. 1) Completed comprehensive technical reports: a. Mine Burial Assessment, State-of-the Art ... Science , Technology, and Modeling. A review of Coastal Research, Modeling, and Naval Operational Needs in Shallow Water Environments with

Director's Discretionary Fund Report for Fiscal Year 1997

NASA Technical Reports Server (NTRS)

1998-01-01

This technical memorandum contains brief technical papers describing research and technology development programs sponsored by the Ames Research Center Director's Discretionary Fund during fiscal year 1997 (October 1996 through September 1997). Appendices provide administrative information for each of the sponsored research programs.

2012 Missouri Local Technical Assistance Program (LTAP) at Missouri S&T.

DOT National Transportation Integrated Search

2013-05-01

This annual report is a summary of the activities during 2012 for the Missouri Local Technical : Assistance Program (Missouri LTAP), which is located at Missouri University of Science and : Technology (Missouri S&T). It is submitted to the Missouri D...

Director's discretionary fund report for fiscal year 1994

NASA Technical Reports Server (NTRS)

1995-01-01

This technical memorandum contains brief technical papers describing research and technology development programs sponsored by the Ames Research Center Director's Discretionary Fund during fiscal year 1991 (October 1993 through September 1994). An appendix provides administrative information for each of the sponsored research programs.

Director's Discretionary Fund report for FY 1993

NASA Technical Reports Server (NTRS)

1994-01-01

This technical memorandum contains brief technical papers describing research and technology development programs sponsored by the Ames Research Center Director's Discretionary Fund during fiscal year 1993 (October 1992 through September 1993). An appendix provides administrative information for each of the sponsored research programs.

Laser Technician Associate Degree Program. A Proposal Submitted to Wisconsin State Board of Vocational, Technical, and Adult Education. (Curriculum Development.) Final Report.

ERIC Educational Resources Information Center

North Central Technical Inst., Wausau, WI.

This final report contains the program proposal with supporting data for developing curriculum materials for and implementing an associate-degree laser technology program at the North Central Technical Institute. The proposal outline provides this information: (1) objectives for the program designed to prepare a technician to safely operate,…

Pathfinder Technologies Specialist, X-37

NASA Technical Reports Server (NTRS)

French, James R.

2001-01-01

The X-37 is a technology demonstrator sponsored by NASA. It includes a number of experiments both imbedded (i.e., essential aspects of the vehicle) and separate. The technologies demonstrated will be useful in future operational versions as well as having broad applications to other programs. Mr. James R. French, of JRF Engineering Services and as a consultant to SAIC, has provided technical support to the X-37 NASA Program office since the beginning of the program. In providing this service, Mr. French has maintained close contact with the Boeing Seal Beach and Rocketdyne technical teams via telephone, e-mail, and periodic visits. His interfaces were primarily with the working engineers in order to provide NASA sponsors with a different view than that achieved through management channels. Mr. French's periodic and highly detailed technical reports were submitted to NASA and SAIC (Science Applications International Corporation) on a weekly/monthly basis. These reports addressed a wide spectrum of programmatic and technical interests related to the X-37 Program including vehicle design, flight sciences, propulsion, thermal protection, Guidance Navigation & Control (GN&C), structures, and operations. This deliverable is presented as a consolidation of the twelve monthly reports submitted during the Contract's Option Year,

MentorLinks: Advancing Technological Education, 2008-2010

ERIC Educational Resources Information Center

Hause, Ellen M., Ed.

2010-01-01

MentorLinks, part of the Advancing Technological Education program supported by the National Science Foundation and administered by the American Association of Community Colleges (AACC), provides technical assistance and networking opportunities to improve community college programs that prepare technicians in the science, technology, engineering,…

Related Skills in the Marketplace. Final Report.

ERIC Educational Resources Information Center

John C. Calhoun State Community Coll., Decatur, AL.

A study identified related skills needed in five diploma programs offered in the Technical Division of John C. Calhoun State Community College in Decatur, Alabama. The programs were automotive technology, refrigeration/air conditioning, electrical technology, design drafting technology, and cosmetology. Thirty-five area businesses and industries…

Materials and Processes Technology.

ERIC Educational Resources Information Center

Ritz, John M.; And Others

This instructional resource guide is intended to assist the industrial arts (IA) teacher in implementing a comprehensive materials and Processes Technology program at the technical level in Virginia high schools. The course is designed to help students make informed educational and occupational choices and prepare them for advanced technical or…

Research and technology operating plan summary: Fiscal year 1975 research and technology program. [space programs, energy technology, and aerospace sciences

NASA Technical Reports Server (NTRS)

1975-01-01

Summaries are presented of Research and Technology Operating Plans currently in progress throughout NASA. Citations and abstracts of the operating plans are presented along with a subject index, technical monitor index, and responsible NASA organization index. Research programs presented include those carried out in the Office of Aeronautics and Space Technology, Office of Energy Programs, Office of Applications, Office of Space Sciences, Office of Tracking and Data Acquisition, and the Office of Manned Space Flight.

The DeKalb High Technology Needs Assessment for Gifted Students.

ERIC Educational Resources Information Center

Johnson, Berman E.

A study was conducted by DeKalb Area Vocational-Technical School (DAVTS) to determine the attitudes of gifted high school students toward high technology as a choice for postsecondary studies and their interest in joint enrollment in DATVS's high technology programs. A student questionnaire, information on DATVS high technology programs, and a…

Free piston space Stirling technology program

NASA Technical Reports Server (NTRS)

Dochat, G. R.; Dhar, M.

1989-01-01

MTI recently completed an initial technology feasibility program for NASA by designing, fabricating and testing a space power demonstrator engine (SPDE). This program, which confirms the potential of free-piston Stirling engines, provided the major impetus to initiate a free-piston Stirling space engine (SSE) technology program. The accomplishments of the SPDE program are reviewed, and an overview of the SSE technology program and technical status to date is provided. It is shown that progress in both programs continues to justify its potential for either nuclear or solar space power missions.

Directors's Discretionary Fund Report For Fiscal Year 1995

NASA Technical Reports Server (NTRS)

1996-01-01

This technical memorandum contains brief technical papers describing research and technology development programs sponsored by the Ames Research Center Director's Discretionary Fund during the fiscal year 1995 (October 1994 through September 1995). An appendix provides administrative information for each of the sponsored research programs.

Indexing NASA programs for technology transfer methods development and feasibility

NASA Technical Reports Server (NTRS)

Clingman, W. H.

1972-01-01

This project was undertaken to evaluate the application of a previously developed indexing methodology to ongoing NASA programs. These programs are comprehended by the NASA Program Approval Documents (PADS). Each PAD contains a technical plan for the area it covers. It was proposed that these could be used to generate an index to the complete NASA program. To test this hypothesis two PADS were selected by the NASA Technology Utilization Office for trial indexing. Twenty-five individuals indexed the two PADS using NASA Thesaurus terms. The results demonstrated the feasibility of indexing ongoing NASA programs using PADS as the source of information. The same indexing methodology could be applied to other documents containing a brief description of the technical plan. Results of this project showed that over 85% of the concepts in the technology should be covered by the indexing. Also over 85% of the descriptors chosen would be accurate. This completeness and accuracy for the indexing is considered satisfactory for application in technology transfer.

The 1992 Research/Technology report

NASA Technical Reports Server (NTRS)

1992-01-01

The 1992 Research & Technology report is organized so that a broad cross section of the community can readily use it. A short introductory paragraph begins each article and will prove to be an invaluable reference tool for the layperson. The approximately 200 articles summarize the progress made during the year in various technical areas and portray the technical and administrative support associated with Lewis technology programs.

A Study to Determine the Basic Science and Mathematics Topics Most Needed by Engineering Technology Graduates of Wake Technical Institute in Performing Job Duties.

ERIC Educational Resources Information Center

Edwards, Timothy I.; Roberson, Clarence E., Jr.

A survey of 470 graduates of the six engineering technology programs at Wake Technical Institute--Architectural, Chemical, Civil Engineering, Computer, Electronic Engineering, and Industrial Engineering Technologies--and 227 of their employers was conducted in October, 1979, to determine the science and mathematics topics most needed by…

Variable Cycle Engine Technology Program Planning and Definition Study

NASA Technical Reports Server (NTRS)

Westmoreland, J. S.; Stern, A. M.

1978-01-01

The variable stream control engine, VSCE-502B, was selected as the base engine, with the inverted flow engine concept selected as a backup. Critical component technologies were identified, and technology programs were formulated. Several engine configurations were defined on a preliminary basis to serve as demonstration vehicles for the various technologies. The different configurations present compromises in cost, technical risk, and technology return. Plans for possible variably cycle engine technology programs were formulated by synthesizing the technology requirements with the different demonstrator configurations.

MINE WASTE TECHNOLOGY PROGRAM:HISTORICAL PERSPECTIVES. CURRENT HIGHLIGHTS, FUTURE OPPORTUNITIES

EPA Science Inventory

For the past 13 years, the Mine Waste Technology Program has been technically driven by the National Risk Management Research Lab. A portion of the MWTP funding has been used to perform field demonstrations of innovative technologies with the potential to address mine waste issue...

Surprising Beauty in Technical Photography

ERIC Educational Resources Information Center

Davidhazy, Andrew

2009-01-01

The Imaging and Photographic Technology area, in which the author teaches, is an applications- and technology-oriented photography program designed to prepare students for work in technical, corporate, industrial, and scientific environments. One day, the author received an e-mail message from an editor who had found his Web site and thought he…

Advancing Research in the National Science Foundation's Advanced Technological Education Program

ERIC Educational Resources Information Center

Wingate, Lori A.

2017-01-01

Advanced Technological Education is distinct from typical National Science Foundation programs in that it is essentially a training--not research--program, and most grantees are located at technical and two-year colleges. This article presents empirical data on the status of research in the program, discusses the program's role in supporting NSF's…

ITS/CVO technical project management for non-technical managers : participant guide

DOT National Transportation Integrated Search

1998-09-01

In 1996, the FHWA Office of Motor Carriers (OMC) identified the need to develop a Technical Training Program to support the deployment of Intelligent Transportation System (ITS) technologies for Commercial Vehicle Operations (CVO). The workforce -...

A Laser Technology Program Does Not Start with the Speed of Light.

ERIC Educational Resources Information Center

Gebert, John H.

1982-01-01

Describes the personnel, equipment, and facilities problems encountered by North Central Technical Institute in the development of a laser technician program, and the program's enrollment and job placement rates. Advocates financial support for such programs to meet the national demand for laser and other high technology personnel. (WL)

Integrating Existing Material Into Educational Television Programming. Satellite Technology Demonstration, Technical Report No. 0502.

ERIC Educational Resources Information Center

Beard, Karen L.; Lonsdale, Helen C.

The Satellite Technology Demonstration (STD) produced a series of 81 television programs called the "J-series" for junior high school students. This material was used to illustrate real life situations for a career development program. Because materials were expensive, the decision was made to produce "in-house" programs and…

Integrating the Department of Defense Military Services’ Technology Development Programs to Improve Time, Cost, and Technical Quality Parameters

DTIC Science & Technology

2007-03-01

the DoD in general and across the SR, DD(X), and FCS programs in particular. The findings of this study show that through careful planning and...FCS programs in particular. The findings of this study show that through careful planning and coordinated technology transition, DoD acquisition...careful planning and coordinated technology transition, DoD acquisition programs can indeed leverage the technology development efforts of the three

National Aeronautics and Space Administration Scientific and Technical Information Programs.

ERIC Educational Resources Information Center

Pinelli, Thomas E., Ed.

1990-01-01

Eleven articles discuss informational and educational programs of the National Aeronautics and Space Administration (NASA). Some of the areas discussed include scientific and technical information management, the new Space and Earth Science Information Systems, transfer of technology to other industries, intellectual property issues, and the…

Modernization of the NASA scientific and technical information program

NASA Technical Reports Server (NTRS)

Cotter, Gladys A.; Hunter, Judy F.; Ostergaard, K.

1993-01-01

The NASA Scientific and Technical Information Program utilizes a technology infrastructure assembled in the mid 1960s to late 1970s to process and disseminate its information products. When this infrastructure was developed it placed NASA as a leader in processing STI. The retrieval engine for the STI database was the first of its kind and was used as the basis for developing commercial, other U.S., and foreign government agency retrieval systems. Due to the combination of changes in user requirements and the tremendous increase in technological capabilities readily available in the marketplace, this infrastructure is no longer the most cost-effective or efficient methodology available. Consequently, the NASA STI Program is pursuing a modernization effort that applies new technology to current processes to provide near-term benefits to the user. In conjunction with this activity, we are developing a long-term modernization strategy designed to transition the Program to a multimedia, global 'library without walls.' Critical pieces of the long-term strategy include streamlining access to sources of STI by using advances in computer networking and graphical user interfaces; creating and disseminating technical information in various electronic media including optical disks, video, and full text; and establishing a Technology Focus Group to maintain a current awareness of emerging technology and to plan for the future.

MIT Lincoln Laboratory Annual Report 2007: Technology in Support of National Security

DTIC Science & Technology

2007-01-01

technical innovation and scientific discoveries. MISSION: TechnoLogy In SupporT of naTIonaL SecurITy 2007 Dr. Claude R. Canizares Vice president for...problems. The Lincoln Laboratory New Technology Initiatives Program is one of several internal technology innovation mechanisms. Technologies emerging...externships. LIFT2, an innovative professional learning program for science, technology , and math teachers, serves Massachusetts metro south/west region

Video Production Program Benefits Both Students and School

ERIC Educational Resources Information Center

Vincent, Robert

2010-01-01

The author spent many years in the classroom as a traditional technical education teacher. He was always attracted to emerging technologies, and visual technologies in particular interested him. In this article, he shares some of his experiences with setting up and running a very successful TV/video technology program.

A Program Like Any Other…Like None Other: Sustaining a Laboratory Science Technology Program for Deaf and Hard-of-Hearing Students

ERIC Educational Resources Information Center

Pagano, Todd; Ross, Annemarie D.; O'Neill, George J.

2012-01-01

A goal of the Laboratory Science Technology program at the National Technical Institute for the Deaf, a college of Rochester Institute of Technology, is to produce graduates with strong foundations in applied science, hands-on laboratory applications, and "soft skills" necessary for competitive employment as laboratory technicians.…

ENVIRONMENTAL TECHNOLOGY VERIFICATION FOR AIR POLLUTION CONTROL TECHNOLOGIES: FINAL REPORT

EPA Science Inventory

The technical objective of the Environmental Technology Verification (ETV) Program's Air Pollution Control Technology (APCT) Center is to verify environmental technology performance by obtaining objective quality-assured data, thus providing potential purchasers and permitters wi...

Ornamental Horticulture Technology; Suggested 2-Year Post High School Curriculums.

ERIC Educational Resources Information Center

Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

Developed by a technical education specialist, this guide is designed to aid school administrators in planning and developing 2-year post-high school programs or evaluating existing programs in ornamental horticulture technology. In addition to general information on the program, contents include course outlines with examples of tests and…

Stafford Technical Center: Designing a Future for Architects and Builders

ERIC Educational Resources Information Center

Lucci, William, Jr.

2005-01-01

The Engineering Technology Academy (ETA) program at Stafford Technical Center in Rutland, Vermont, offers benefits beyond the conventional high school learning experience. In September, at the beginning of the program, students learn the traditional skills of using tools, line weights and lettering. Once they develop these basic skills, students…

The NASA Scientific and Technical Information (STI) Program's Implementation of Open Archives Initiative (OAI) for Data Interoperability and Data Exchange.

ERIC Educational Resources Information Center

Rocker, JoAnne; Roncaglia, George J.; Heimerl, Lynn N.; Nelson, Michael L.

Interoperability and data-exchange are critical for the survival of government information management programs. E-government initiatives are transforming the way the government interacts with the public. More information is to be made available through Web-enabled technologies. Programs such as the NASA's Scientific and Technical Information (STI)…

Wilder-Naifeh Technical Skills Grant Program Report: A Baseline Evaluation

ERIC Educational Resources Information Center

Tennessee Higher Education Commission, 2010

2010-01-01

The Wilder-Naifeh Technical Skills Grant, introduced in Winter 2004, grants awards of up to $2,000 to students who attend one of the 27 Tennessee Technology Centers. Since the inception of this program, approximately 50,000 students have received grants, and the state of Tennessee has spent roughly $47.5 million on the program over the last four…

Marketing Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency profile for marketing technology. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 580 specialty and foundation key indicators for evaluating mastery of…

Space station systems technology study (add-on task). Volume 3: Technology advancement program plan

NASA Technical Reports Server (NTRS)

1985-01-01

Program plans are given for an integrating controller for space station autonomy as well as for controls and displays. The technical approach, facility requirements and candidate facilities, development schedules, and resource requirements estimates are given.

Developing Pre-Technical Secondary Education Programs: Rationale, Content, and Methodology.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta. Dept. of Vocational and Career Development.

This guide outlines the rationale, content, and methodology of a three-part high technology program that was developed in Georgia to provide secondary school students with training in the areas of electronics and electromechanical and mechanical technologies. Discussed first are the Georgia Initiative, the impact of high technology and the role of…

NASA/Army Rotorcraft Technology. Volume 1: Aerodynamics, and Dynamics and Aeroelasticity

NASA Technical Reports Server (NTRS)

1988-01-01

The Conference Proceedings is a compilation of over 30 technical papers presented at this milestone event which reported on the advances in rotorcraft technical knowledge resulting from NASA, Army, and industry rotorcraft research programs over the last 5 to 10 years. The Conference brought together over 230 government, industry, and allied nation conferees to exchange technical information and hear invited technical papers by prominent NASA, Army, and industry researchers covering technology topics which included: aerodynamics, dynamics and elasticity, propulsion and drive systems, flight dynamics and control, acoustics, systems integration, and research aircraft.

Energy Technology Training Conference Proceedings (Atlanta, Georgia, October 27-29, 1976).

ERIC Educational Resources Information Center

Oak Ridge Associated Universities, TN.

Conference goals included identifying projected technical manpower needs and skill mix requirements, potential obstacles to developing an adequate technical education base, and stimulating education, industry, and labor cooperation in technical program development and federal interagency coordination and cooperation. Findings of the conference…

Should Technical Education Be More Liberal?

ERIC Educational Resources Information Center

Heckman, Richard T.

Due to the increasing emphasis on technology and the trend toward downsizing and multiculturalism in today's workplace, graduates of technical education programs need non-technical thinking and problem solving skills to stay successfully employed. Historically, however, a dichotomy has existed between vocational and liberal education, which has…

32 CFR 202.8 - Training RAB members.

Code of Federal Regulations, 2011 CFR

2011-07-01

... technologies, chemicals of concern, and sampling protocols, as well as informing them of the availability of independent technical advice and document review through EPA's Technical Assistant Grant program and DoD's...

32 CFR 202.8 - Training RAB members.

Code of Federal Regulations, 2012 CFR

2012-07-01

... technologies, chemicals of concern, and sampling protocols, as well as informing them of the availability of independent technical advice and document review through EPA's Technical Assistant Grant program and DoD's...

32 CFR 202.8 - Training RAB members.

Code of Federal Regulations, 2013 CFR

2013-07-01

... technologies, chemicals of concern, and sampling protocols, as well as informing them of the availability of independent technical advice and document review through EPA's Technical Assistant Grant program and DoD's...

Assigning a Thesis Project In the Two-Year Architectural Technology Program

ERIC Educational Resources Information Center

Obermeyer, Thomas

1977-01-01

The "thesis project" assigned in the sixth quarter of the eight-quarter architectural technology program at the Dakota County Area Vocational-Technical Institute in Rosemont, Minnesota, requires the students to design a building for a local public service organization or government agency. The complete project will include a program, a…

Career and Technical Education as Pathways: Factors Influencing Postcollege Earnings of Selected Career Clusters

ERIC Educational Resources Information Center

Compton, Jonathan I.; Laanan, Frankie Santos; Starobin, Soko S.

2010-01-01

This study investigated the relationship between student characteristics such as gender, race/ethnicity, program of study, degree completion, and earnings outcomes for students enrolled in career and technical education (CTE) programs within the business, information technology (IT), and marketing career clusters in community colleges to determine…

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

ERIC Educational Resources Information Center

Selwitz, Jason Lawrence

2017-01-01

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum…

Technology in education: A guidebook for developing a science and math education support program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, C.L.

1992-09-01

Education is vital to survival and success in an increasingly technical world, and the quality of education is the responsibility of everyone students, teachers, parents, industry, and government. Any technical organization wanting to contribute to that success through its local education system can do so easily and effectively through careful planning. This report details that planning process and includes methods to (1) identify the interests, strengths, and resources of the technical organization; (2) identify the needs of the local education system; (3) interface with local school system administration, principals, and teachers; and (4) develop a unique plan to match themore » organization's strengths and resources with the needs of the school system. Following these getting started'' activities is the actual program that the Engineering Technology Division implemented in a local elementary school, including the curriculum, topics, and actual lesson plans used by technical personnel in the classroom. Finally, there are enrichment activities for teachers and students, suggestions for measuring the success of an education support program, and an overview of student responses to questions about the overall program.« less

Technology in education: A guidebook for developing a science and math education support program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, C.L.

1992-09-01

Education is vital to survival and success in an increasingly technical world, and the quality of education is the responsibility of everyone students, teachers, parents, industry, and government. Any technical organization wanting to contribute to that success through its local education system can do so easily and effectively through careful planning. This report details that planning process and includes methods to (1) identify the interests, strengths, and resources of the technical organization; (2) identify the needs of the local education system; (3) interface with local school system administration, principals, and teachers; and (4) develop a unique plan to match themore » organization`s strengths and resources with the needs of the school system. Following these ``getting started`` activities is the actual program that the Engineering Technology Division implemented in a local elementary school, including the curriculum, topics, and actual lesson plans used by technical personnel in the classroom. Finally, there are enrichment activities for teachers and students, suggestions for measuring the success of an education support program, and an overview of student responses to questions about the overall program.« less

Program for transfer research and impact studies

NASA Technical Reports Server (NTRS)

Kottenstette, J. P.; Rusnak, J. J.; Staskin, E. R.

1972-01-01

The progress made in achieving TRIS research objectives during the first six months of 1972 is reviewed. The Tech Brief-Technical Support Package Program and technology transfer profiles are presented along with summaries of technology transfer in nondestructive testing, and visual display systems.

Gian Porro | NREL

Science.gov Websites

Technical Risk Analysis for the Geothermal Technologies ProgramPDF. Golden, CO: National Renewable Energy analysis and planning activities (PAE Hub) Research Interests Analytical support to Geothermal Technologies Program, including assessment of the competitiveness of geothermal electricity generation Investigation of

Respiratory Therapy Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a respiratory therapy technology program. The guide contains four sections. The General Information section contains an introduction giving an overview and defining the purpose and objectives, a program…

Energygrams: Brief descriptions of energy technology

NASA Astrophysics Data System (ADS)

Simpson, W. F., Jr.

This compilation of technical notes (called Energygrams) is published by the Technical Information Center. Energygrams are usually one-page illustrated bulletins describing DOE technology or data and telling how to obtain the technical reports or other material on which they are based. Frequently a personal contact is given who can provide program information in addition to the data found in the reports. The compilation is organized by subject categories, and, within each category, Energygrams are presented alphabetically by Energygram title.

Energy-Related Technology Programs in Community and Junior Colleges: An Analysis of Existing and Planned Programs.

ERIC Educational Resources Information Center

Doggette, John R.

This study was conducted to provide a basis for planning for needed energy-related occupational technology programs in two-year educational institutions. A questionnaire was sent to 1,152 junior, community, and technical colleges in fall 1975; 774 (67%) responded. The survey identified 62 existing one- and two-year energy-related programs and 132…

Developing and Implementing a Content Structure for Educational Television Programming in the Area of Career Education. Satellite Technology Demonstration, Technical Report No. 0506.

ERIC Educational Resources Information Center

Lonsdale, Helen C.; McWilliams, Alfred E., Jr.

The Program Component of the Satellite Technology Demonstration (STD) developed the programing for a television series on career planning for junior high school students. A program called "Time Out" was designed, developed, and implemented to be broadcast throughout the Rocky Mountain States. A staff of educators and communicators…

Unified Technical Concepts--Phase II. Expand Application to Industrial Technologies and Adult Education. Final Report.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

A project was conducted to develop a laboratory-based instructional system in physics for two-year technician programs that emphasizes both the analogies between basic physical principles and the applications of the principles in modern technology. The Unified Technical Concepts (UTC) system that was developed is (1) a reorganization of physics…

Standards for Technological Literacy and STEM Education Delivery through Career and Technical Education Programs

ERIC Educational Resources Information Center

Asunda, Paul A.

2012-01-01

At a minimum, employers rely on career and technical education (CTE) and workforce training systems to supply workers able to perform in their jobs. In CTE classes that seek to integrate science, technology, engineering, and mathematics (STEM) concepts, it falls to the instructors to design and sequence the learning experiences that will promote…

Transit Technology Evaluation - A Literature Capsule

DOT National Transportation Integrated Search

1981-11-01

The report is designed to make the literature on transportation concerning promising new transit technology more accessible to users. The Transit Technology Evaluation Program investigates the technical, social, and economic factors involved in the p...

Establishing a scientific and technical information program: Planning and resource management

NASA Technical Reports Server (NTRS)

Blados, Walter R.

1992-01-01

In the last 50 years, technological advances have accelerated at a rate unprecedented in history. We are experiencing a tremendous expansion of scientific and technological effort in many directions, and the result is a fantastic increase in the accumulation of scientific and technical information (STI) and knowledge. An integral part of the research and development (R&D) process is the STI associated with it. STI is both a raw material (input) and a product (output) of this process. The topics addressed include the following: the value of STI, management of an STI program, program policy and guidance, organizational structure, data sources, training/orientation, and the current information environment.

Technical assistance and the transfer of remote sensing technology. [for economic development

NASA Technical Reports Server (NTRS)

Chipman, R.

1977-01-01

The transfer of technology from industrialized countries to the third world is a very complicated process and one that requires a great deal of research and development. The political and social obstacles to this transfer are generally greater than the technical obstacles, but technical assistance programs have neither the competence nor the inclination to deal with these factors adequately. Funding for technical assistance in remote sensing is now expanding rapidly, and there is a growing need for institutions to study and promote the effective use of this technology for economic development. The United Nations, the Food and Agriculture Organization, the World Bank, the United States Agency for International Development and the Canadian technical assistance agencies take different approaches to the problem and deal with the political pressures in different ways.

Robotics Competitions: The Choice Is up to You!

ERIC Educational Resources Information Center

Johnson, Richard T.; Londt, Susan E.

2010-01-01

Competitive robotics as an interactive experience can increase the level of student participation in technology education, inspire students to consider careers in technical fields, and enhance the visibility of technology education programs. Implemented correctly, a competitive robotics program can provide a stimulating learning environment for…

Printing/Graphic Arts Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a printing/graphics technology program. It includes specializations in art and copy preparation, prepress/image assembly, and lithographic press operations. The guide contains four major sections. The General…

Technology Education Partnerships: Arkansas Articulation.

ERIC Educational Resources Information Center

Thompson, Dale E.; And Others

The Arkansas Articulation Program is the process used since 1986 to supervise the coordination between secondary and postsecondary levels of vocational, technical, and technology education courses whose content has been standardized as the result of competency identification specific to each subject area. The program aims to strengthen the…

NASA/HAA Advanced Rotorcraft Technology and Tilt Rotor Workshops. Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

1980-01-01

This presentation provides an overview of the NASA Rotorcraft Program as an introduction to the technical sessions of the Advanced Rotorcraft Technology Workshop. It deals with the basis for NASA's increasing emphasis on rotorcraft technology, NASA's research capabilities, recent program planning efforts, highlights of its 10-year plan and future directions and opportunities.

An Historical Overview of the Production Requirement for the Satellite Technology Demonstration. Technical Report No. 0504.

ERIC Educational Resources Information Center

Smith, Myron P.; Sosey, Phillip

The Satellite Technology Demonstration employs the latest telecommunications technology to deliver community oriented programing to rural areas. To meet the demand for contemporary broadcasts responsive to community needs, a studio was constructed in the Denver area to produce and coordinate future programs for the Rocky Mountains area. Problems…

Research and technology, 1984: Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Moorehead, T. W. (Editor)

1984-01-01

The Marshall Space Flight Center conducts research programs in space sciences, materials processing in space, and atmospheric sciences, as well as technology programs in such areas as propulsion, materials, processes, and space power. This Marshall Space Flight Center 1984 Annual Report on Research and Technology contains summaries of the more significant scientific and technical results obtained during FY-84.

Proceedings of the 2000 U.S. DOE Hydrogen Program Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

NREL

2000-11-01

The 2000 US Department of Energy (DOE) Hydrogen Program Review was sponsored by the Office of Power Delivery Systems, Office of Power Technologies, US Department of Energy. The proceedings from this meeting serve as an important technology reference for the DOE Hydrogen Program. This document contains technical progress reports on research and technology validation projects funded by the DOE Hydrogen Program in Fiscal Year 2000. The growth of fuel cell technology will provide a basis for the establishment of the hydrogen option into both transportation and electricity supply markets.

Endocrine Disruptor Screening Program (EDSP) Comprehensive Management Plans

EPA Pesticide Factsheets

The EDSP Comprehensive Management Plan describes the technical review processes that will be used in implementing this program and how the agency intends to factor technology advancements into the program.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1977-01-01

The NASA Research and Technology program for FY 1978 is represented by this compilation of the 'Summary' portions of each of the Research and Technology Objectives and Plans (RTOPS). The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section contains citations and abstracts of the RTOPs. Following this section are four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Reusable Launch Vehicle Technology Program

NASA Technical Reports Server (NTRS)

Freeman, Delma C., Jr.; Talay, Theodore A.; Austin, R. Eugene

1996-01-01

Industry/NASA Reusable Launch Vehicle (RLV) Technology Program efforts are underway to design, test, and develop technologies and concepts for viable commercial launch systems that also satisfy national needs at acceptable recurring costs. Significant progress has been made in understanding the technical challenges of fully reusable launch systems and the accompanying management and operational approaches for achieving a low-cost program. This paper reviews the current status of the Reusable Launch Vehicle Technology Program including the DC-XA, X-33 and X-34 flight systems and associated technology programs. It addresses the specific technologies being tested that address the technical and operability challenges of reusable launch systems including reusable cryogenic propellant tanks, composite structures, thermal protection systems, improved propulsion, and subsystem operability enhancements. The recently concluded DC-XA test program demonstrated some of these technologies in ground and flight tests. Contracts were awarded recently for both the X-33 and X-34 flight demonstrator systems. The Orbital Sciences Corporation X-34 flight test vehicle will demonstrate an air-launched reusable vehicle capable of flight to speeds of Mach 8. The Lockheed-Martin X-33 flight test vehicle will expand the test envelope for critical technologies to flight speeds of Mach 15. A propulsion program to test the X-33 linear aerospike rocket engine using a NASA SR-71 high speed aircraft as a test bed is also discussed. The paper also describes the management and operational approaches that address the challenge of new cost-effective, reusable launch vehicle systems.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2014 CFR

2014-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION... Adult Vocational Education Program to pay the costs of providing technical assistance. (c) In providing... 34 Education 3 2014-07-01 2014-07-01 false How may a State provide technical assistance? 403.187...

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2013 CFR

2013-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION... Adult Vocational Education Program to pay the costs of providing technical assistance. (c) In providing... 34 Education 3 2013-07-01 2013-07-01 false How may a State provide technical assistance? 403.187...

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2012 CFR

2012-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION... Adult Vocational Education Program to pay the costs of providing technical assistance. (c) In providing... 34 Education 3 2012-07-01 2012-07-01 false How may a State provide technical assistance? 403.187...

34 CFR 403.187 - How may a State provide technical assistance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION... Adult Vocational Education Program to pay the costs of providing technical assistance. (c) In providing... 34 Education 3 2011-07-01 2011-07-01 false How may a State provide technical assistance? 403.187...

Laboratory Characteristics in Technical Education.

ERIC Educational Resources Information Center

Ives, Quay D.

The research reported is intended to provide a body of information on technical-scientific shop and laboratory education in the field of technological education. The study seeks to address the dearth of organized information on the utilization of laboratories in the technical education context. Various programs involving use of laboratories are…

CIVIL TECHNOLOGY, HIGHWAY AND STRUCTURAL OPTIONS, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM. TECHNICAL EDUCATION PROGRAM SERIES, NUMBER 8.

ERIC Educational Resources Information Center

BEAUMONT, JOHN A; AND OTHERS

DESIGNED TO ASSIST ADMINISTRATORS, SUPERVISORS, AND TEACHERS TO PLAN, DEVELOP, AND EVALUATE PROGRAMS, THIS CURRICULUM GUIDE OFFERS COURSE OUTLINES, PROCEDURES, LABORATORY LAYOUTS, TEXTS AND REFERENCES, LISTS OF LABORATORY EQUIPMENT AND ITS COST, AND A SELECTED LIST OF SCIENTIFIC AND TECHNICAL SOCIETIES. BASIC MATERIALS WERE PREPARED AT THE…

The Educational and Technical Courses in the ELT Program in Turkey: Do They Contribute to ICT Skills?

ERIC Educational Resources Information Center

Uzun, Levent

2016-01-01

The present study investigated the contribution of the educational and technical courses in the English Language Teacher Training Program (ELTTP) at universities in Turkey to the information and communication technologies (ICT) knowledge and skills of the students. The participants were 74 teachers/trainees who were attending their last year in…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayberry, J.; Stelle, S.; O`Brien, M.

The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development`s Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR).

Sandia National Laboratories: Employee & Retiree Resources: Technical

Science.gov Websites

Programs Nuclear Weapons About Nuclear Weapons Safety & Security Weapons Science & Technology Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Cost Benefit Studies. Final Report.

ERIC Educational Resources Information Center

Weiner, Arthur; Marson, Arthur A.

This document applies Dr. Mehar Aurora's method for conducting cost benefit studies to the Food Manufacturing Technology-Dairy and the Food Manufacturing Technology-Canning and Freezing programs offered by the Moraine Park Technical Institute. Costs to individual students enrolled in the programs include tuition, fees, housing, travel, books,…

MentorLinks: Advancing Technological Education, 2005-2007

ERIC Educational Resources Information Center

Hause, Ellen M., Ed.

2008-01-01

The goals of the MentorLinks: Advancing Technological Education program, supported by the National Science Foundation and administered by the American Association of Community Colleges (AACC), are to provide technical assistance and networking opportunities for the purpose of improving community college programs that prepare technicians in the…

From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

NASA Technical Reports Server (NTRS)

Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

1995-01-01

As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar Conditions; Electromagnetic Effects; Integrated Assessments and Databases. Specific technology development tasks will be solicited through a NASA Research Announcement to be released in May of 1994. The areas in which tasks are solicited include: (1) engineering environment definitions, (2) environments and effects design guidelines, (3) environments and effects assessment models and databases, and (4) flight/ground simulation/technology assessment data.

From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

NASA Astrophysics Data System (ADS)

Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

1995-02-01

As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar Conditions; Electromagnetic Effects; Integrated Assessments and Databases. Specific technology development tasks will be solicited through a NASA Research Announcement to be released in May of 1994. The areas in which tasks are solicited include: (1) engineering environment definitions, (2) environments and effects design guidelines, (3) environments and effects assessment models and databases, and (4) flight/ground simulation/technology assessment data.

Office Systems Technology Associate Degree. Louisiana Technical Education Program and Course Standards. Competency-Based Postsecondary Curriculum Outline from Bulletin 1822.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Vocational Education.

This document outlines the curriculum of Louisiana's office systems technology associate degree program, which is a 6-term (75-credit hour) competency-based program designed to prepare students for employment as special assistants for business executives and top management. Presented first are a description of the program and a list of the general…

Technical Education in Agriculture at the Post Secondary Level

ERIC Educational Resources Information Center

Leamer, Thomas C.

1978-01-01

A college dean discusses two-year postsecondary agriculture technology programs and the need for properly trained faculty to train students for semiskilled, skilled, and technical positions both on and off the farm. (MF)

The NASA Scientific and Technical Information Program: Exploring challenges, creating opportunities

NASA Technical Reports Server (NTRS)

Sepic, Ronald P.

1993-01-01

The NASA Scientific and Technical Information (STI) Program offers researchers access to the world's largest collection of aerospace information. An overview of Program activities, products and services, and new directions is presented. The R&D information cycle is outlined and specific examples of the NASA STI Program in practice are given. Domestic and international operations and technology transfer activities are reviewed and an agenda for the STI Program NASA-wide is presented. Finally, the incorporation of Total Quality Management and evaluation metrics into the STI Program is discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Jensen, K.J.

Technical and administrative activities of the Analytical Chemistry Laboratory (ACL) are reported for fiscal year 1984. The ACL is a full-cost-recovery service center, with the primary mission of providing a broad range of technical support services to the scientific and engineering programs at ANL. In addition, ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL is administratively within the Chemical Technology Division, the principal user, but provides technical support for all of the technical divisions and programs at ANL. The ACL has threemore » technical groups - Chemical Analysis, Instrumental Analysis, and Organic Analysis. Under technical activities 26 projects are briefly described. Under professional activities, a list is presented for publications and reports, oral presentations, awards and meetings attended. 6 figs., 2 tabs.« less

Technology Integration in the Teaching and Learning Process in Career and Technical Education Programs in North Carolina

ERIC Educational Resources Information Center

Jones, Sharon Torrence

2011-01-01

Career and technical education (CTE), historically known as vocational education, is a collective term used to identify high school curricula designed to teach students job skills and prepare them for employment (Lynch, 2000). Transformations in the workforce have created a demand for teachers to be technologically literate and adept at using…

An A+ Certification Program.

ERIC Educational Resources Information Center

Rubenstein, Charles

2003-01-01

Describes the computer technology program at Thomas A. Edison Vocational and Technical High School in Queens, New York, all of whose graduates go on to specialty secondary schools for additional certification or to postsecondary education programs. (JOW)

A pilot demonstration project of technology application from the aerospace industry to city management (four cities program)

NASA Technical Reports Server (NTRS)

Ervin, G. F.; Blomeyer, L. S.

1972-01-01

The Four Cities Program has completed the first year of the planned two-year program. At the beginning of the first year, a variety of program initiation activities were accomplished. Contracts were negotiated; science and technology advisors were interviewed, selected and assigned; general indoctrination and integration of the advisors into city affairs occurred; technical needs were identified and related projects pursued; pilot projects for the second year were identified; inter-city coordination on technical problems began to emerge; and the general soundness of the four cities program seems to have been established. Above all, the inter-personal relationships between the advisors and their interfaces in city government appear to be functioning smoothly. The establishment of such mutual respect, trusts, and confidences are believed essential to the success of the program.

Research and Technology: 2003 Annual Report of the John F Kennedy Space Center

NASA Technical Reports Server (NTRS)

2003-01-01

The John F. Kennedy Space Center (KSC) is America's Spaceport Technology Center. The KSC technology development program encompasses the efforts of the entire KSC team, consisting of Government and contractor personnel, working in partnership with academic institutions and commercial industry. KSC's assigned mission areas are space launch operations and spaceport and range technologies. KSC's technology development customers include current space transportation programs, future space transportation programs / initiatives, and enabling technical programs. The KSC Research and Technology 2003 Annual Report encompasses the efforts of contributors to the KSC advanced technology development program and KSC technology transfer activities. Dr. Dave Bartine, KSC Chief Technologist, (321) 867-7069, is responsible for publication of this report and should be contacted for any desired information regarding KSC's research and technology development activities.

Research and Technology Operating Plan Summary, Fiscal Year 1972 Research and Technology Program

NASA Technical Reports Server (NTRS)

1971-01-01

The NASA Research and Technology program for FY 1972 is presented. It is a compilation of the summary portions of each of the RTOPs (Research and Technology Operating Plan) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities.

Research and Technology Operating Plan Summary: Fiscal Year 1973 Research and Technology Program

NASA Technical Reports Server (NTRS)

1972-01-01

Abstracts are presented of each of the Research and Technology Operating Plans (RTOP) used for management review and control of research currently in progress throughout NASA. This RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, industry, and universities. The summary is arranged in five sections consisting of citations and abstracts of the RTOPs and subject, technical monitor, responsible NASA organization, and RTOP number indexes.

2014 SRNL LDRD Annual Report, Rev. 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mcwhorter, S.

2015-03-15

Laboratory Directed Research and Development is a congressionally authorized program that provides the ‘innovation inspiration’ from which many of the Laboratory’s multi-discipline advancements are made in both science and engineering technology. The program is the backbone for insuring that scientific, technical and engineering capabilities can meet current and future needs. It is an important tool in reducing the probability of technological surprise by allowing laboratory technical staff room to innovate and keep abreast of scientific breakthroughs. Drawing from the synergism among the EM and NNSA missions, and work from other federal agencies ensures that LDRD is the key element inmore » maintaining the vitality of SRNL’s technical programs. The LDRD program aims to position the Laboratory for new business in clean energy, national security, nuclear materials management and environmental stewardship by leveraging the unique capabilities of the Laboratory to yield foundational scientific research in core business areas, while aligning with SRS strategic initiatives and maintaining a vision for ultimate DOE applications.« less

Single-stage-to-orbit: Meeting the challenge

NASA Astrophysics Data System (ADS)

Freeman, Delma C., Jr.; Talay, Theodore A.; Austin, Robert Eugene

1995-10-01

There has been and continues to be significant discussion about the viability of fully reusable, single-stage-to-orbit (SSTO) concepts for delivery of payloads to orbit. Often, these discussions have focused in detail on performance and technology requirements relating to the technical feasibility of the concept, with only broad generalizations on how the SSTO will achieve its economic goals of greatly reduced vehicle ground and flight operations costs. With the current industry and NASA Reusable Launch Vehicle Technology Program efforts underway to mature and demonstrate technologies leading to a viable commercial launch system that also satisfies national needs, achieving acceptable recurring costs becomes a significant challenge. This paper reviews the current status of the Reusable Launch Vehicle Technology Program including the DC-XA, X-33, and X-34 flight systems and associated technology programs. The paper also examines lessons learned from the recently completed DC-X reusable rocket demonstrator program. It examines how these technologies and flight systems address the technical and operability challenges of SSTO whose solutions are necessary to reduce costs. The paper also discusses the management and operational approaches that address the challenge of a new cost-effective, reusable launch vehicle system.

Single-stage-to-orbit — Meeting the challenge

NASA Astrophysics Data System (ADS)

Freeman, Delma C.; Talay, Theodore A.; Austin, Robert Eugene

1996-02-01

There has been and continues to be significant discussion about the viability of fully reusable, single-stage-to-orbit (SSTO) concepts for delivery of payloads to orbit. Often, these discussions have focused in detail on performance and technology requirements relating to the technical feasibility of the concept, with only broad generalizations on how the SSTO will achieve its economic goals of greatly reduced vehicle ground and flight operations costs. With the current industry and NASA Reusable Launch Vehicle Technology Program efforts underway to mature and demonstrate technologies leading to a viable commercial launch system that also satisfies national needs, achieving acceptable recurring costs becomes a significant challenge. This paper reviews the current status of the Reusable Launch Vehicle Technology Program including the DC-XA, X-33, X-34 flight systems and associated technology programs. The paper also examines lessons learned from the recently completed DC-X reusable rocket demonstrator program. It examines how these technologies and flight systems address the technical and operability challenges of SSTO whose solutions are necessary to reduce costs. The paper also discusses the management and operational approaches that address the challenge of a new cost-effective, reusable launch vehicle system.

Strategic Plan for Information Systems and Technology, Fiscal Years 1994-1998.

ERIC Educational Resources Information Center

National Archives and Records Administration, Washington, DC.

The information systems and technology management program of the National Archives and Records Administration (NARA) establishes broad policy guidance and technical standards for information management to ensure that appropriate resource sharing can occur, while providing cost-effective support for mission requirements of program offices. The NARA…

FOOD PROCESSING TECHNOLOGY, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM.

ERIC Educational Resources Information Center

KNOEBEL, ROBERT M.; AND OTHERS

ADMINISTRATORS, ADVISORY COMMITTEES, SUPERVISORS, AND TEACHERS MAY USE THIS GUIDE IN PLANNING AND DEVELOPING NEW PROGRAMS OR EVALUATING EXISTING PROGRAMS IN POST-HIGH SCHOOL FOOD PROCESSING TECHNOLOGY. BASIC MATERIALS WERE PREPARED BY THE STATE UNIVERSITY OF NEW YORK AGRICULTURAL AND TECHNICAL COLLEGE AT MORRISVILLE AND FINAL PREPARATION WAS…

Annual Summary. Training and Technology Experimentation, Demonstration, and Utilization Program Activities (January 1-December 31, 1971).

ERIC Educational Resources Information Center

Oak Ridge Associated Universities, TN.

Directed primarily toward increasing utilization of industrial resources for training and development of disadvantaged persons, Training and Technology (TAT) activities for 1971 included: (1) development and implementation of experimental approaches to program development and operation, (2) technical support for university-conducted related…

Composite Technology Personnel Development. Final Report.

ERIC Educational Resources Information Center

Massuda, Rachel; Fink, Edwin

A project was conducted at Delaware County Community College, Media, Pennsylvania, to train two instructional staff members in the area of composite materials technology. A 1-year training program was set up for the two technical instructional specialists at the Boeing Helicopter Training Center, Eddystone, Pennsylvania. The program consisted of…

Training for Techies: A Schoolwise Commitment.

ERIC Educational Resources Information Center

Farmer, Lesley S. J.

1998-01-01

Outlines the Technical Aide (TA) internship program in the Tamalpais Union High School District (Larkspur, California) where students skilled in computer use facilitate technology use within the school. A TA program can provide needed personnel and service in the library as well as highlight library staff competence in technology. Presents tips…

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

Technical writing practically unified through industry

NASA Technical Reports Server (NTRS)

Houston, L. S.

1981-01-01

General background details in the development of a university level technical writing program, based upon the writing tasks of the student's occupations, are summarized. Objectives and methods for unifying the courses of study with the needs of industry are discussed. Four academic course divisions, Industries Technologies, in which preparation and training are offered are: Animal, Horticulture, Agriculture, and Agricultural Business. Occupational competence is cited as the main goal for these programs in which technical writing is to be practically unified through industry. Course descriptions are also provided.

Annual Report: Unconventional Fossil Energy Resource Program (30 September 2013)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soong, Yee; Guthrie, George

2013-09-30

Yee Soong, Technical Coordinator, George Guthrie, Focus Area Lead, UFER Annual Report, NETL-TRS-UFER-2013, NETL Technical Report Series, U.S. Department of Energy, National Energy Technology Laboratory, Pittsburgh, PA, 2013, p 14.

Laser Science & Technology Program Annual Report - 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, H-L

2001-03-20

The Laser Science and Technology (LS&T) Program Annual Report 2001 provides documentation of the achievements of the LLNL LS&T Program during the April 2001 to March 2002 period using three formats: (1) an Overview that is a narrative summary of important results for the year; (2) brief summaries of research and development activity highlights within the four Program elements: Advanced Lasers and Components (AL&C), Laser Optics and Materials (LO&M), Short Pulse Laser Applications and Technologies (SPLAT), and High-Energy Laser System and Tests (HELST); and (3) a compilation of selected articles and technical reports published in reputable scientific or technology journalsmore » in this period. All three elements (Annual Overview, Activity Highlights, and Technical Reports) are also on the Web: http://laser.llnl.gov/lasers/pubs/icfq.html. The underlying mission for the LS&T Program is to develop advanced lasers, optics, and materials technologies and applications to solve problems and create new capabilities of importance to the Laboratory and the nation. This mission statement has been our guide for defining work appropriate for our Program. A major new focus of LS&T beginning this past year has been the development of high peak power short-pulse capability for the National Ignition Facility (NIF). LS&T is committed to this activity.« less

ORNL superconducting technology program for electric power systems

NASA Astrophysics Data System (ADS)

Hawsey, R. A.

1994-04-01

The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy's Office of Energy Efficiency and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are conductor development and applications development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY 1993 Annual Program Review held July 28--29, 1993. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. In fact, nearly three-fourths of the ORNL effort is devoted to industrial competitiveness projects with private companies. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making rapid progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

ORNL superconducting technology program for electric energy systems

NASA Astrophysics Data System (ADS)

Hawsey, R. A.

1993-02-01

The Oak Ridge National Laboratory (ORNL) Superconducting Technology Program is conducted as part of a national effort by the US Department of Energy's (DOE's) Office of Conservation and Renewable Energy to develop the technology base needed by US industry for commercial development of electric power applications of high-temperature superconductivity. The two major elements of this program are wire development and systems development. This document describes the major research and development activities for this program together with related accomplishments. The technical progress reported was summarized from information prepared for the FY-92 Peer Review of Projects, which was conducted by DOE's Office of Program Analysis, Office of Energy Research. This ORNL program is highly leveraged by the staff and other resources of US industry and universities. Interlaboratory teams are also in place on a number of industry-driven projects. Patent disclosures, working group meetings, staff exchanges, and joint publications and presentations ensure that there is technology transfer to US industry. Working together, the collaborative teams are making tremendous progress in solving the scientific and technical issues necessary for the commercialization of long lengths of practical high-temperature superconductor wire and wire products.

Educational Technology Program. Quarterly Technical Summary, Period Ending 31 May 1970.

ERIC Educational Resources Information Center

Frick, Frederick C.

An overview of the Lincoln Training System (LTS) and descriptions of the hardward and software of the LTS-1 and LTS-2 systems are provided. The overall program seeks to develop, test, and evaluate technical aids to vocational training systems. These are appropriate to this field because the high costs need to be reduced and because there are clear…

Filling the Gap: Integrating STEM into Career and Technical Education Middle School Programs

ERIC Educational Resources Information Center

Wu-Rorrer, Ray

2017-01-01

The field of STEM education is an educational framework that has surged in application over the past decade. Science, Technology, Engineering, and Math (STEM) is infused in nearly every facet of our society. Filling the gap of current research in middle school career and technical education (CTE) and STEM programs is important as traditional CTE…

Project T.E.A.M. (Technical Education Advancement Modules). Fundementals of Workplace Integration.

ERIC Educational Resources Information Center

Kraeling, Vicki

This module is one of a series of instructional guides developed by Project TEAM (Technical Education Advancement Modules), a cooperative demonstration program for high technology training for unemployed, underemployed, and existing industrial employees whose basic technical skills are in need of upgrading. The module is a 27-hour overview course…

Rethinking Technical Communication Pedagogy: A Poststructuralist View of Program and Course Design.

ERIC Educational Resources Information Center

Woolever, Kristin R.

Technical communication specialists today really have to be technology experts as well as effective writers--even their titles have changed to "information designers, information engineers, or document developers." Teachers of technical communication should be up to date in the classroom to meet the changing needs of the workplace.…

NASA scientific and technical information program multimedia initiative

NASA Technical Reports Server (NTRS)

Cotter, Gladys A.; Kaye, Karen

1993-01-01

This paper relates the experiences of the NASA Scientific and Technical Information Program in introducing multimedia within the STI Program framework. A discussion of multimedia technology is included to provide context for the STI Program effort. The STI Program's Multimedia Initiative is discussed in detail. Parallels and differences between multimedia and traditional information systems project development are highlighted. Challenges faced by the program in initiating its multimedia project are summarized along with lessons learned. The paper concludes with a synopsis of the benefits the program hopes to provide its users through the introduction of multimedia illustrated by examples of successful multimedia projects.

The Main Features of Undertaking Technological and Vocational Curriculum Reform in Taiwan

ERIC Educational Resources Information Center

Lee, Lung-Sheng Steven; Huang, Bo-Shiang Bert

2003-01-01

In Taiwan, technological and vocational education (TVE) is primarily offered in vocational high schools (VHS's), career programs in comprehensive high schools (CHSs), junior colleges of technology (JCTs), colleges of technology (CTs), and universities of technology (UTs), which prepare practical technical and managerial personnel for industry and…

Mobilize Your instruction Program with Wireless Technology.

ERIC Educational Resources Information Center

Mathias, Molly Susan; Heser, Steven

2002-01-01

Describes the use of wireless technology for library bibliographic instruction at the Milwaukee Area Technical College. Highlights include a wireless mobile cart that holds laptop computers; faculty support; future plans; and recommendations, including investigating technology infrastructure and marketing. (LRW)

The technology application process as applied to a firefighter's breathing system

NASA Technical Reports Server (NTRS)

Mclaughlan, P. B.

1974-01-01

The FBS Program indicated that applications of advanced technology can result in an improved FBS that will satisfy the requirements defined by municipal fire departments. To accomplish this technology transfer, a substantial commitment of resources over an extended period of time has been required. This program has indicated that the ability of NASA in terms of program management such as requirement definition, system analysis, and industry coordination may play as important a role as specific sources of hardware technology. As a result of the FBS program, a sequence of milestones was passed that may have applications as generalized milestones and objectives for any technical application program.

Key issues and technical route of cyber physical distribution system

NASA Astrophysics Data System (ADS)

Zheng, P. X.; Chen, B.; Zheng, L. J.; Zhang, G. L.; Fan, Y. L.; Pei, T.

2017-01-01

Relying on the National High Technology Research and Development Program, this paper introduced the key issues in Cyber Physical Distribution System (CPDS), mainly includes: composite modelling method and interaction mechanism, system planning method, security defence technology, distributed control theory. Then on this basis, the corresponding technical route is proposed, and a more detailed research framework along with main schemes to be adopted is also presented.

Fossil Energy Program

NASA Astrophysics Data System (ADS)

McNeese, L. E.

1981-01-01

Increased utilization of coal and other fossil fuel alternatives as sources of clean energy is reported. The following topics are discussed: coal conversion development, chemical research and development, materials technology, component development and process evaluation studies, technical support to major liquefaction projects, process analysis and engineering evaluations, fossil energy environmental analysis, flue gas desulfurization, solid waste disposal, coal preparation waste utilization, plant control development, atmospheric fluidized bed coal combustor for cogeneration, TVA FBC demonstration plant program technical support, PFBC systems analysis, fossil fuel applications assessments, performance assurance system support for fossil energy projects, international energy technology assessment, and general equilibrium models of liquid and gaseous fuel supplies.

A Model for the Management of Technical Risk in New Technology Development Programs

DTIC Science & Technology

1989-09-01

Heppenheimer , T. A . "Requiem for a Heavy-weight," Air and Snace/Smithsonian, 4: 50-55-- June/July 1989). 91. Jane’s Information Group, Inc. Jane’s...8217-- A MODEL FOR THE MANAGEMENT OF TECHNICAL RISK IN NEW TECHNOLOGY DEVELOPMENT PROGRAMS THESIS Peter B. King Captain, USA~F A FIT /G SM /L SR /89...S-22 1 DISI~1UT0N TAEMEN𔃻 A , S’o11 _44110h, eea;EL ECTE EApproVed 0 ulcrl~;DC2 0 1989 Dis-,irbuticf Unlimited D DEPARTMENT OF THE AIR FORCE-- - AIR

Environmental restoration and waste management: Robotics technology development program: Robotics 5-year program plan. [Contains glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This plan covers robotics Research, Development, Demonstration, Testing, activities in the Program for the next five years. These activities range from bench-scale R D to fullscale hot demonstrations at DOE sites. This plan outlines applications of existing technology to near-term needs, the development and application of enhanced technology for longer-term needs, and an initiation of advanced technology development to meet those needs beyond the five-year plan. The objective of the Robotic Technology Development (RTDP) is to develop and apply robotics technologies that will enable Environmental Restoration and Waste Management operations at DOE sites to be safer, faster and cheaper. Fivemore » priority DOE sites were visited in March 1990 to identify needs for robotics technology in ER WM operations. This 5-Year Program Plan for the RTDP detailed annual plans for robotics technology development based on identified needs. This 5-Year Program Plan discusses the overall approach to be adopted by the RTDP to aggressively develop robotics technology and contains discussions of the Program Management Plan, Site Visit and Needs Summary, Approach to Needs-Directed Technical Development, Application-Specific Technical Development, and Cross-Cutting and Advanced Technology. Integrating application-specific ER WM needs, the current state of robotics technology, and the potential benefits (in terms of faster, safer, and cheaper) of new technology, the Plan develops application-specific road maps for robotics RDDT E for the period FY 1991 through FY 1995. In addition, the Plan identifies areas where longer-term research in robotics will have a high payoff in the 5- to 20-year time frame. 12 figs.« less

Engineering Research and Development and Technology thrust area report FY92

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langland, R.T.; Minichino, C.

1993-03-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, theymore » are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering.« less

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1990-01-01

The NASA research and technology program for FY 1990 is presented. The summary portions is compiled of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP summary is designed to facilitate communication and coordination among concerned technical personnel in government, industry, and universities. The first section containing citations and abstracts of the RTOPs is followed by four indices: Subject; Technical Monitor; Responsible NASA Organization; and RTOP number.

Component technology for stirling power converters

NASA Technical Reports Server (NTRS)

Thieme, Lanny G.

1991-01-01

NASA Lewis Research Center has organized a component technology program as part of the efforts to develop Stirling converter technology for space power applications. The Stirling Space Power Program is part of the NASA High Capacity Power Project of the Civil Space Technology Initiative (CSTI). NASA Lewis is also providing technical management for the DOE/Sandia program to develop Stirling converters for solar terrestrial power producing electricity for the utility grid. The primary contractors for the space power and solar terrestrial programs develop component technologies directly related to their goals. This Lewis component technology effort, while coordinated with the main programs, aims at longer term issues, advanced technologies, and independent assessments. An overview of work on linear alternators, engine/alternator/load interactions and controls, heat exchangers, materials, life and reliability, and bearings is presented.

THE PRE-TECHNICAL PROJECT, A DEMONSTRATION IN EDUCATION FOR TECHNOLOGY. MEDICAL TECHNOLOGY, 11TH AND 12TH YEAR.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY.

MEDICAL TECHNOLOGY IS ONE OF THREE OFFERINGS OF THE PRETECHNICAL PROJECT DESIGNED TO REMOTIVATE UNDERACHIEVING HIGH SCHOOL STUDENTS WHO, UPON SUCCESSFUL COMPLETION OF THE PROGRAM, MAY BE ADMITTED TO THE CAREER PROGRAMS OF THE COMMUNITY COLLEGE. DEVELOPED BY A COMMITTEE OF TEACHERS AT THE LOCAL LEVEL, THE MANUAL IS INTENDED TO ASSIST TEACHERS,…

25 CFR 170.166 - What services do Indian LTAP centers provide?

Code of Federal Regulations, 2010 CFR

2010-04-01

... technology implementation in cooperation with the private sector; (9) Develop educational programs to... transportation technology transfer services, including education, training, technical assistance and related... developing and sharing tribal transportation technology and traffic safety systems and information with other...

Rover and Telerobotics Technology Program

NASA Technical Reports Server (NTRS)

Weisbin, Charles R.

1998-01-01

The Jet Propulsion Laboratory's (JPL's) Rover and Telerobotics Technology Program, sponsored by the National Aeronautics and Space Administration (NASA), responds to opportunities presented by NASA space missions and systems, and seeds commerical applications of the emerging robotics technology. The scope of the JPL Rover and Telerobotics Technology Program comprises three major segments of activity: NASA robotic systems for planetary exploration, robotic technology and terrestrial spin-offs, and technology for non-NASA sponsors. Significant technical achievements have been reached in each of these areas, including complete telerobotic system prototypes that have built and tested in realistic scenarios relevant to prospective users. In addition, the program has conducted complementary basic research and created innovative technology and terrestrial applications, as well as enabled a variety of commercial spin-offs.

Dr. William Tumas - Associate Laboratory Director, Materials and Chemical

Science.gov Websites

Chemical Science and Technology Dr. William Tumas - Associate Laboratory Director, Materials and Chemical , technical direction, and workforce development of the materials and chemical science and technology , program management, and program execution. He joined NREL in December 2009 as Director of the Chemical and

Combining Emerging Technology and Writing across the Curriculum: Professional Development that Works!

ERIC Educational Resources Information Center

Hampson, Margaret P.; Hearron, Tom; Noggle, Mary

2009-01-01

Though Writing Across the Curriculum is not a new concept, Caldwell Community College and Technical Institute offers a two-semester professional development program that combines this instructional approach with emerging technology. Though this program focuses on the use of writing to enhance student learning, this training format can be…

2007 Mississippi Curriculum Framework: Secondary Diesel Service Technology. (Program CIP: 47.0605 - Diesel Mechanics Technology/Technician)

ERIC Educational Resources Information Center

Ellison, Dave; Jackson, Edward

2007-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

College Choice and Student Selection of an Information-Technology Degree Program

ERIC Educational Resources Information Center

Severson, Christopher S.

2017-01-01

This mixed-methods study analyzed data from 906 Ruffalo Noel Levitz Student Satisfaction Surveys (RNLSSS) at a two-year technical college in Wisconsin, to determine influences on participants' choices of programs in information technology (IT). Quantitative results showed that none of eight variables (i.e., cost, financial assistance, academic…

Programmatic Knowledge Management: Technology, Literacy, and Access in 21st-Century Writing Programs

ERIC Educational Resources Information Center

York, Eric James

2015-01-01

Growing out of research in Technical Communication, Composition Studies, and Writing Program Administration, the articles in this dissertation explicitly seek to address changes in the practices and products of writing and writing studies wrought by the so-called "digital revolution" in communication technology, which has been ongoing in…

2007 Mississippi Curriculum Framework: Secondary Technology Applications. (Program CIP: 21.0101 - Technology Applications)

ERIC Educational Resources Information Center

Fava, David; Gunkel, Andy; Hood, Jennifer; Mason, Debra; Walker, Jim

2007-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Developing Printed Supplementary Materials to Accompany Satellite Programming for Junior High School Students. Satellite Technology Demonstration, Technical Report No. 0508.

ERIC Educational Resources Information Center

Lonsdale, Helen C.; O'Neill, Donald W.

To implement a career education program for junior high school students in the rural, isolated areas of the Rocky Mountain States, Satellite Technology Demonstration (STD) tested the use of a satellite-assisted communications system for the delivery of social services. A magazine was designed to promote acceptance of the television programing and…

Programming as an Instrument for Community Involvement: Designing Topical Television Programs for Rural Adult Audiences. Satellite Technology Demonstration Technical Report No. 0503.

ERIC Educational Resources Information Center

Darby, Keith

The overall objective of the Satellite Technology Demonstration (STD) was to test the feasibility of delivering television Programing via satellite to isolated, rural locations. Community members at various STD sites were surveyed to determine how they felt about a variety of topics which were planned for an adult evening series. Topics in…

Energizing Government Decision-Makers with the Facts on Solar Technology, Policy, and Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Solar Technical Assistance Team (STAT) is a network of solar technology and implementation experts who provide timely, unbiased expertise to assist policymakers and regulators in making informed decisions about solar programs and policies. Government officials can submit requests directly to the STAT for technical assistance. STAT then partners with experts in solar policy, regulation, finance, technology, and other areas to deliver accurate, up-to-date information to state and local decision makers. The STAT responds to requests on a wide range of issues -- including, but not limited to, feed-in tariffs, renewable portfolio standards, rate design, program design, workforce and economicmore » impacts of solar on jurisdictions, and project financing.« less

Laboratory Directed Research and Development Program FY98

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, T.; Chartock, M.

1999-02-05

The Ernest Orlando Lawrence Berkeley National Laboratory (LBNL or Berkeley Lab) Laboratory Directed Research and Development Program FY 1998 report is compiled from annual reports submitted by principal investigators following the close of the fiscal year. This report describes the supported projects and summarizes their accomplishments. It constitutes a part of the Laboratory Directed Research and Development (LDRD) program planning and documentation process that includes an annual planning cycle, projection selection, implementation, and review. The LBNL LDRD program is a critical tool for directing the Laboratory's forefront scientific research capabilities toward vital, excellent, and emerging scientific challenges. The program providesmore » the resources for LBNL scientists to make rapid and significant contributions to critical national science and technology problems. The LDRD program also advances LBNL's core competencies, foundations, and scientific capability, and permits exploration of exciting new opportunities. All projects are work in forefront areas of science and technology. Areas eligible for support include the following: Advanced study of hypotheses, concepts, or innovative approaches to scientific or technical problems; Experiments and analyses directed toward ''proof of principle'' or early determination of the utility of new scientific ideas, technical concepts, or devices; and Conception and preliminary technical analyses of experimental facilities or devices.« less

NASA SCIENTIFIC AND TECHNICAL INFORMATION (STI) PROGRAM PLAN

EPA Science Inventory

NASA's scientific and technical information (STI) is an essential product of research, facilitates technology transfer, and enhances the competitive edge of U.S. companies and educational institutions. NASA's STI is an integral part of NASA's information transfer and is critical...

2013 Missouri Local Technical Assistance Program (LTAP) at Missouri S&T.

DOT National Transportation Integrated Search

2014-05-01

This project was established to provide training, information and technical assistance to local government agencies in Missouri. The : Missouri LTAP benefits UTC as an agent of technology transfer and also through the Missouri LTAP, UTC supports Miss...

Technology Program Management Model (TPMM) Overview

DTIC Science & Technology

2006-05-10

1 1 “Secure the High Ground” Jeff Craver Project Manager Space and Missile Defense Technical Center Jeff.Craver@US.Army.Mil ff r r r j t r i il...f i l t r ff. r r . r . il UNCLASSIFIED UNCLASSIFIED Technology Program Management Model (TPMM) Overview 05-10-2006 Report Documentation Page Form...DATES COVERED 00-00-2006 to 00-00-2006 4. TITLE AND SUBTITLE Technology Program Management Model (TPMM) Overview 5a. CONTRACT NUMBER 5b. GRANT

Design definition study of NASA/Navy lift/cruise fan V/STOL aircraft

NASA Technical Reports Server (NTRS)

1975-01-01

Assessed are the risks associated with the lift/cruise fan technology V/STOL aircraft program. Three candidate concepts for the technology aircraft design approach are considered: the lowspeed only modification, the full performance modification, and the all new aircraft concepts. Survey results indicate that the lift/cruise fan technology aircraft program is feasible, from the standpoint of technical risk, with some evidence of uncertainty of meeting the planned schedule and relatively minor impact on estimated program costs.

NASA Environmentally Responsible Aviation's Highly-Loaded Front Block Compressor Demonstration

NASA Technical Reports Server (NTRS)

Celestina, Mark

2017-01-01

The ERA project was created in 2009 as part of NASAs Aeronautics Research Mission Directorates (ARMD) Integrated Systems Aviation Program (IASP). The purpose of the ERA project was to explore and document the feasibility, benefit, and technical risk of vehicles concepts and enabling technologies to reduce aviations impact on the environment. The metrics for this technology is given in Figure 1 with the N+2 metrics highlighted in green. It is anticipated that the United States air transportation system will continue to expand significantly over the next few decades thus adversely impacting the environment unless new technology is incorporated to simultaneously reduce nitrous oxides (NOx), noise and fuel consumption. In order to achieve the overall goals and meet the technology insertion challenges, these goals were divided into technical challenges that were to be achieved during the execution of the ERA project. Technical challenges were accomplished through test campaigns conducted by Integrated Technology Demonstration (ITDs). ERAs technical performance period ended in 2015.

None

DOE Office of Scientific and Technical Information (OSTI.GOV)

Traylor, T.D.; Hicks, S.C.

1994-03-01

Transportation Energy Research announces on a monthly basis the current worldwide research and development information available on energy-efficient, environmentally sound transportation technologies. Its purpose is to enhance the technology transfer efforts of the Department of Energy. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The DOE Office of Transportation Technologies (OTT) managesmore » federal R&D programs aimed at improving transportation-sector energy efficiency. OTT currently supports activities in four major program areas: Electric and Hybrid Vehicles; Advanced Propulsion Systems; and magnetic levitation technology; Advanced Materials. DOE and DOE contractors can obtain copies for $4.00 per issue by using VISA, MasterCard, or OSTI deposit accounts. Contact the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831, Attention: Information Services. For further information, call (615) 576-8401. Public availability is by subscription from the US Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161. Order PB94-900900.« less

APTS : advanced public transportation systems program : technical assistance brief

DOT National Transportation Integrated Search

1993-01-01

Advanced Public Transportation Systems, or APTS, are advanced navigation and communication technologies applied to all aspects of public transportation system operations. APTS provides the technology for transportation agencies to make timely transit...

"Analysis of Leadership Styles Developed by Teachers and Administrators in Technical-Technological Programs: The Case of The Cooperative University of Colombia"

ERIC Educational Resources Information Center

Cuadros, María del Pilar Jaime; Cáceres Reche, María Pilar; Lucena, Francisco Javier Hinojo

2018-01-01

This work is part of a wider research effort in the field of leadership and organizational development, coordinated by the University of Granada and the A.R.E.A Research Group (Analysis of Educational Reality in Andaluz), HUM/672. It was developed in the Cooperative University of Colombia, a country where technical and technological programmes…

JPRS Report, Science & Technology, USSR: Science and Technology Policy.

DTIC Science & Technology

1988-03-03

accordance with the Kazakhstan Regional Scientific Research Program, which is called upon to unite scientific development of a basic and applied nature...Resources for 1986-1990 and the Period to 2000." The institute is a part of the union Avtogennyye protsessy Scientific Technical Complex and the...republic Tsvetnaya metallurgiya Scientific Technical Complex and is participating in the work of the creative youth collective for the automation of

Discovering Hidden Resources: Assistive Technology Recycling, Refurbishing, and Redistribution. RESNA Technical Assistance Project.

ERIC Educational Resources Information Center

RESNA: Association for the Advancement of Rehabilitation Technology, Arlington, VA.

This monograph discusses the benefits of recycling and reusing assistive technology for students with disabilities. It begins by discussing the benefits of recycled assistive technology for suppliers, students, and consumers, and then profiles programmatic models for assistive technology recycling programs. The advantages and disadvantages for…

Solar thermal technology report, FY 1981. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1982-01-01

The activities of the Department of Energy's Solar Thermal Technology Program are discussed. Highlights of technical activities and brief descriptions of each technology are given. Solar thermal conversion concepts are discussed in detail, particularily concentrating collectors and salt-gradient solar ponds.

Field Demonstration of Multi-Sensor Technology for Condition Assessment of Wastewater Collection Systems (Abstract)

EPA Science Inventory

The purpose of the field demonstration program is to gather technically reliable cost and performance information on selected condition assessment technologies under defined field conditions. The selected technologies include zoom camera, focused electrode leak location (FELL), ...

Health information technology: standards, implementation specifications, and certification criteria for electronic health record technology, 2014 edition; revisions to the permanent certification program for health information technology. Final rule.

PubMed

2012-09-04

With this final rule, the Secretary of Health and Human Services adopts certification criteria that establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology will need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This final rule also makes changes to the permanent certification program for health information technology, including changing the program's name to the ONC HIT Certification Program.

The Case for Evaluating Student Outcomes and Equity Gaps to Improve Pathways and Programs of Study

ERIC Educational Resources Information Center

Bragg, Debra D.

2017-01-01

When linked to program review and improvement, program evaluation can help practitioners to ensure that career-technical education (CTE) and science, technology, engineering, and mathematics (STEM) programs offer equitable access and outcomes for underserved student groups.

IDA and the Technical Cooperation Program Real-Time Systems and Ada Workshop, 21-23 June 1988

DTIC Science & Technology

1988-06-01

IDA Memorandum Report M-540, IDA and the Technical Cooperation Program Real - Time Systems and Ada Workshop, 21-23 June 1988, documents the results of... time systems , (2) identify and clarify known Ada real-time issues, (3) identify near-term and long-term solutions, and (4) provide assessment and...Technology (ODUSD R&AT). Funding was provided by the STARS Joint Program Office. The objectives were to (1) define requirements for using Ada in real

Proceedings of the Advanced Communications Technology Satellite (ACTS) Conference 2000

NASA Technical Reports Server (NTRS)

Bauer, Robert (Editor); Derwae, Robert (Editor)

2000-01-01

The ACTS experiments program, which began in December 1993 and consisted of 103 different experiments, has made significant contributions to minimizing the risk of advanced satellite communications technology. The ACTS Conference 2000 (AC2000) was held to report the results of the program since the last ACTS conference was held in 1995 and to celebrate the end of a very successful satellite program. The conference was held on May 31, 2000, as part of the 6th Ka-band Utilization Conference in Cleveland, Ohio. Approximately 280 representatives of industry, academia, and government attended. The conference was organized into two parts: a technical session during the day and an evening reception. During the day, a series of five technical sessions included presentations of 17 papers covering the results of the experiment activity and technical performance of the satellite. In the evening, a reception was held to celebrate the end of the ACTS Experiments Program on one of NASA's most successful experimental communications satellite. These proceedings were developed to capture the entire event, including the evening reception.

Photovoltaic Subcontract Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Surek, Thomas; Catalano, Anthony

1993-03-01

This report summarizes the fiscal year (FY) 1992 progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Crystalline Materials and Advanced Concepts project, the Polycrystalline Thin Films project, Amorphous Silicon Research project, the Photovoltaic Manufacturing Technology (PVMaT)more » project, PV Module and System Performance and Engineering project, and the PV Analysis and Applications Development project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1992, and future research directions.« less

Texas Schools, Inc.: A Case Study of the Transfer of Technology at a Pilot Bilingual Program.

ERIC Educational Resources Information Center

Pearson, Vangie L.

Texas Schools, Inc. (TSI) developed a pilot program in bilingual education for Mexican-American vocational workers in the Department of Diesel Mechanics at Texas Tech University. This study assesses the transfer of technology in that environment using quantitative and qualitative measures. TSI, a technical and vocational school in Lubbock, Texas,…

Preparing for High Technology: CAD/CAM Programs. Research & Development Series No. 234.

ERIC Educational Resources Information Center

Abram, Robert; And Others

This guide is one of three developed to provide information and resources to assist in planning and developing postsecondary technican training programs in high technology areas. It is specifically intended for vocational-technical educators and planners in the initial stages of planning a specialized training option in computer-aided design (CAD)…

Engineering Technology Programs Courses Guide for Computer Aided Design and Computer Aided Manufacturing.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Div. of Vocational Education.

This guide describes the requirements for courses in computer-aided design and computer-aided manufacturing (CAD/CAM) that are part of engineering technology programs conducted in vocational-technical schools in Georgia. The guide is organized in five sections. The first section provides a rationale for occupations in design and in production,…

Improving Access to the Baccalaureate: Articulation Agreements and the National Science Foundation's Advanced Technological Education Program

ERIC Educational Resources Information Center

Zinser, Richard W.; Hanssen, Carl E.

2006-01-01

This article presents an analysis of national data from the Advanced Technological Education (ATE) program regarding articulation agreements for the transfer of 2-year technical degrees to baccalaureate degrees. Quantitative and qualitative data are illustrated to help explain the extent to which ATE projects improve access to universities for…

2007 Mississippi Curriculum Framework: Secondary Automotive Collision Repair Technology. (Program CIP: 47.0603 - Autobody/Collision and Repair Technology/Technician)

ERIC Educational Resources Information Center

Dowds, Eris; Anderson, Daniel; Sizemore, Rick; Johnson, John

2007-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Idaho National Laboratory Annual Report FY 2013 LDRD Project Summaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dena Tomchak

The FY 2013 LDRD Annual Report is a compendium of the diverse research performed to develop and ensure the INL’s technical capabilities support the current and future DOE missions and national research priorities. LDRD is essential to INL—it provides a means for the Laboratory to maintain scientific and technical vitality while funding highly innovative, high-risk science and technology research and development (R&D) projects. The program enhances technical capabilities at the Laboratory, providing scientific and engineering staff with opportunities to explore proof-of-principle ideas, advanced studies of innovative concepts, and preliminary technical analyses. Established by Congress in 1991, the LDRD Program provesmore » its benefit each year through new programs, intellectual property, patents, copyrights, national and international awards, and publications.« less

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1992-01-01

This publication represents the NASA research and technology program for FY92. It is a compilation of the Summary portions of each of the RTOP's (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOP's is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and technology objectives and plans: Summary fiscal year 1991

NASA Technical Reports Server (NTRS)

1991-01-01

This publication represents the NASA research and technology program for FY 1991. It is a compilation of the Summary portions of each of the RTOP's (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, industry, and in universities. The first section contains citations and abstracts of the RTOP's and is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1993-01-01

This publication represents the NASA research and technology program for FY-93. It is a compilation of the Summary portions of each of the RTOP's (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOP's is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1988-01-01

This publication represents the NASA research and technology program for FY88. It is a compilation of the Summary portions of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOPs is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1989-01-01

This publication represents the NASA research and technology program for FY89. It is a compilation of the Summary portions of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOPs is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1985-01-01

This publication represents the NASA research and technology program for FY 1985. It is a compilation of the Summary portions of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOPs is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP number.

Research and Technology Objectives and Plans Summary (RTOPS)

NASA Technical Reports Server (NTRS)

1987-01-01

This publication represents the NASA research and technology program for FY87. It is a compilation of the Summary portions of each of the RTOPs (Research and Technology Objectives and Plans) used for management review and control of research currently in progress throughout NASA. The RTOP Summary is designed to facilitate communication and coordination among concerned technical personnel in government, in industry, and in universities. The first section containing citations and abstracts of the RTOPs is followed by four indexes: Subject, Technical Monitor, Responsible NASA Organization, and RTOP Number.

Assessment of the Cast Stone Low-Temperature Waste Form Technology Coupled with Technetium Removal - 14379

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Christopher F.; Rapko, Brian M.; Serne, R. Jeffrey

2014-03-03

The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) were chartered to implement a science and technology program addressing low-temperature waste forms for immobilization of DOE aqueous waste streams, including technetium removal as an implementing technology. As a first step, the laboratories examined the technical risks and uncertainties associated withmore » the Cast Stone waste immobilization and technetium removal projects at Hanford. Science and technology gaps were identified for work associated with 1) conducting performance assessments and risk assessments of waste form and disposal system performance, and 2) technetium chemistry in tank wastes and separation of technetium from waste processing streams. Technical approaches to address the science and technology gaps were identified and an initial sequencing priority was suggested. A subset of research was initiated in 2013 to begin addressing the most significant science and technology gaps. The purpose of this paper is to report progress made towards closing these gaps and provide notable highlights of results achieved to date.« less

Light Water Reactor Sustainability Program Advanced Instrumentation, Information, and Control Systems Technologies Technical Program Plan for FY 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hallbert, Bruce Perry; Thomas, Kenneth David

2015-10-01

Reliable instrumentation, information, and control (II&C) systems technologies are essential to ensuring safe and efficient operation of the U.S. light water reactor (LWR) fleet. These technologies affect every aspect of nuclear power plant (NPP) and balance-of-plant operations. In 1997, the National Research Council conducted a study concerning the challenges involved in modernization of digital instrumentation and control systems in NPPs. Their findings identified the need for new II&C technology integration.

Vehicle Technologies Program Funding Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) provides funding opportunities for advanced vehicle technology projects that are aimed at removing technical and cost barriers. Much of the funding available to the Vehicle Technologies Program is distributed to private firms, educational institutions, nonprofit organizations, state and local governments, Native American organizations, and individuals, through competitive solicitations. DOE is strongly committed to partnerships to help ensure the eventual market acceptance of the technologies being developed. New solicitations are announced regularly.

Microwave and millimeter wave monolithic integrated circuits (MIMIC) program. MIMIC briefs: Summaries of phase 3 technology support programs

NASA Astrophysics Data System (ADS)

Kramer, Warner

1993-01-01

This publication contains technical and contractual summaries of the MIMIC program's Phase 3 technology support programs. Each project description includes a discussion of the objectives of the effort, the approach pursued, and recent progress. Also identified are the performing organization(s), principal investigator and/or other key personnel, contract number, program funding and duration, and program monitor/COTR. Concluding the document is a directory of the personnel associated with these projects, from whom more information may be requested.

"Taking Women One Step Further..." Women in Technology. End of Year Report, July '93-June '94.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

The primary purpose of El Paso Community College's (EPCC's) Women in Technology (WIT) Program is to recruit women into nontraditional occupations through technical/vocational education and training. Credit training areas include automotive technology, drafting, electronics, fire technology, heating/ventilation and air conditioning, and welding.…

Technology Education; Engineering Technology and Industrial Technology in California Community Colleges: A Curriculum Guide.

ERIC Educational Resources Information Center

Schon, James F.

In order to identify the distinguishing characteristics of technical education programs in engineering and industrial technology currently offered by post-secondary institutions in California, a body of data was collected by visiting 25 community colleges, 5 state universities, and 8 industrial firms; by a questionnaire sampling of 72 California…

NASA Lewis' IITA K-12 Program

NASA Technical Reports Server (NTRS)

1996-01-01

The NASA Lewis Research Center's Information Infrastructure Technology and Applications for Kindergarten to 12th Grade (IITA K-12) Program is designed to introduce into school systems computing and communications technology that benefits math and science studies. By incorporating this technology into K-12 curriculums, we hope to increase the proficiency and interest in math and science subjects by K-12 students so that they continue to study technical subjects after their high school careers are over.

Alabama Industrial Technician Education Cooperative Demonstration Program (I-TEC). Final Performance Report.

ERIC Educational Resources Information Center

John M. Patterson State Technical Coll., Montgomery, AL.

A cooperative demonstration program between industry (General Electric) and education (John Patterson State Technical College, Alabama) designed and conducted a training program and competency assessment for individuals entering high technology positions related to industrial production in Alabama. The program was designed to develop employees as…

Field Demonstration of Electro-Scan Defect Location Technology for Condition Assessment of Wastewater Collection Systems

EPA Science Inventory

The purpose of the field demonstration program is to gather technically reliable cost and performance information on selected condition assessment technologies under defined field conditions. The selected technologies include zoom camera, electro-scan (FELL-41), and a multi-sens...

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2011 CFR

2011-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY... the Federal Technology Transfer Act of 1986, NIST has the authority to enter into cooperative research... which are consistent with the missions of the laboratory. In turn, NIST has the authority to accept...

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2014 CFR

2014-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY... the Federal Technology Transfer Act of 1986, NIST has the authority to enter into cooperative research... which are consistent with the missions of the laboratory. In turn, NIST has the authority to accept...

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2012 CFR

2012-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY... the Federal Technology Transfer Act of 1986, NIST has the authority to enter into cooperative research... which are consistent with the missions of the laboratory. In turn, NIST has the authority to accept...

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2013 CFR

2013-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY... the Federal Technology Transfer Act of 1986, NIST has the authority to enter into cooperative research... which are consistent with the missions of the laboratory. In turn, NIST has the authority to accept...

Civil Space Technology Initiative: a First Step

NASA Technical Reports Server (NTRS)

1988-01-01

This is the first published overview of OAST's focused program, the Civil Space Technology Initiative, (CSTI) which started in FY88. This publication describes the goals, technical approach, current status, and plans for CSTI. Periodic updates are planned.

Spinoff 1978

NASA Technical Reports Server (NTRS)

Haggerty, James J.

1978-01-01

Spinoff '78 is the annual report of NASA's Technology Utilization Program, which is charged with promoting and stimulating the practical application of government-sponsored aerospace technology. The report is organized in three sections: 1) Aerospace Aims; 2) Technology Twice Used; and 3) Technology Utilization. Section 1 outlines NASA's major programs in space exploration, aeronautical research and technology application, and describes the potential benefits of a direct nature that are accruing from these efforts. Section 2 contains a representative sampling of the indirect benefits resulting from the secondary use of aerospace technology in industry and the economy. Section 3 details the nationwide activities of the Technology Utilization Program in encouraging the broadest possible secondary use of new technology emerging from aerospace programs. The latter section also includes a list of regional NASA officials and others who can be contacted by those seeking NASA technical information or assistance.

The impact of active controls technology on the structural integrity of aeronautical vehicles

NASA Technical Reports Server (NTRS)

Noll, Thomas E.; Austin, Edward; Donley, Shawn; Graham, George; Harris, Terry; Kaynes, Ian; Lee, Ben; Sparrow, James

1993-01-01

The findings of an investigation conducted under the auspices of The Technical Cooperation Program (TTCP) to assess the impact of active controls technology on the structural integrity of aeronautical vehicles and to evaluate the present state-of-the-art for predicting loads caused by a flight-control system modification and the resulting change in the fatigue life of the flight vehicle are summarized. Important points concerning structural technology considerations implicit in applying active controls technology in new aircraft are summarized. These points are well founded and based upon information received from within the aerospace industry and government laboratories, acquired by sponsoring workshops which brought together experts from contributing and interacting technical disciplines, and obtained by conducting a case study to independently assess the state of the technology. The paper concludes that communication between technical disciplines is absolutely essential in the design of future high performance aircraft.

Programming for SITE.

ERIC Educational Resources Information Center

Mody, Bella

1979-01-01

Describes the Satellite Instructional Television Experiment (SITE) project in India during 1975-76, including programing patterns, formats, and audiences. Demonstrates that countries like India have the technical and managerial capability to design, operate, and maintain advanced communication technology. (JMF)

Tanks Focus Area Site Needs Assessment - FY 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, Robert W.; Josephson, Gary B.; Westsik, Joseph H.

2001-04-30

The TFA uses a systematic process for developing its annual program that draws from the tanks science and technology development needs expressed by the five DOE tank waste sites. TFA's annual program development process is iterative and involves the following steps: Collection of site needs; Needs analysis; Development of technical responses and initial prioritization; Refinement of the program for the next fiscal year; Formulation of the Corporate Review Budget (CRB); Preparation of Program Execution Guidance (PEG) for the next FY Revision of the Multiyear Program Plan (MYPP). This document describes the outcomes of the first phase of this process, frommore » collection of site needs to the initial prioritization of technical activities. The TFA received site needs in October - December 2000. A total of 170 site needs were received, an increase of 30 over the previous year. The needs were analyzed and integrated, where appropriate. Sixty-six distinct technical responses were drafted and prioritized. In addition, seven strategic tasks were approved to compete for available funding in FY 2002 and FY 2003. Draft technical responses were prepared and provided to the TFA Site Representatives and the TFA User Steering Group (USG) for their review and comment. These responses were discussed at a March 15, 2001, meeting where the TFA Management Team established the priority listing in preparation for input to the DOE Office of Science and Technology (OST) budget process. At the time of publication of this document, the TFA continues to finalize technical responses as directed by the TFA Management Team and clarify the intended work scopes for FY 2002 and FY 2003.« less

A new generation of real-time DOS technology for mission-oriented system integration and operation

NASA Technical Reports Server (NTRS)

Jensen, E. Douglas

1988-01-01

Information is given on system integration and operation (SIO) requirements and a new generation of technical approaches for SIO. Real-time, distribution, survivability, and adaptability requirements and technical approaches are covered. An Alpha operating system program management overview is outlined.

Career and Technical Education Secondary Female Teachers: Leadership Attributes

ERIC Educational Resources Information Center

White, Tedra H.; Smith, Bettye P.

2012-01-01

The purpose of this study was to determine the leadership attributes, professional characteristics, and personal characteristics of secondary female teachers in career and technical education program areas of agriculture, business, family and consumer sciences, healthcare science, marketing, and technology. This study included 179 female secondary…

The USAID/DOE Mexico Renewable Energy Program: Using technology to build new markets

NASA Astrophysics Data System (ADS)

Hanley, Charles J.

1997-02-01

Under the Mexico Renewable Energy Program, managed by Sandia National Laboratories, sustainable markets for renewable energy technologies are developed through the implementation of pilot projects. Sandia provides technical assistance to several Mexican rural development organizations so they can gain the technical and institutional capability to appropriately utilize renewables within their ongoing programs. Activities in the area of water pumping have shown great replication potential, where the tremendous rural demand for water represents a potential renewable market of over 2 billion. Thirty-six photovoltaic water pumping projects have been installed thus far in the Mexican states of Chihuahua, Sonora, Baja California Sur, and Quintana Roo, and 60 more will be implemented this year. The majority of these projects are in partnership with the Mexican Trust for Shared Risk (FIRCO), which has asked Sandia for assistance in extending the program nationwide. This replication is beginning in five new states, and will continue to grow. Sandia is keeping the U.S. renewable energy industry involved in the program through facilitating partnerships between U.S. and Mexican vendors, and through commercialization assistance with new systems technologies. The program is sponsored by the Department of Energy and the U.S. Agency for International Development.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The goal of the U.S. Department of Energy Underground Coal Conversion (UCC) program is to develop the technology to produce clean fuels from coal deposits unsuitable for commercial exploitation by conventional mining techniques. The highest priority is to develop and demonstrate, in conjunction with industry, a commercially feasible process for underground gasification of low-rank coal in the 1985--1987 time period. The program will also attempt to develop cost-effective technologies to utilize steeply dipping seams and bituminous coal by UCC. Results of the program to date indicate that, while UCC is technically feasible, it still contains some process unknowns, environmental risks,more » and economic risks that require R and D. In order to contribute to the national energy goals, a strong DOE program which incorporates maximum industry involvement is planned. Major projects are described in some detail. Finally, a strong program of supporting activities will address specific problems identified in the field testing and will seek to advance UCC technology. In summary, the program's strategy is to remove the high-risk elements of UCC by resolving those technical, environmental, and economic uncertainties that remain, and to enable industry to assume responsibility for commercialization of the process.« less

Systems Engineering Technical Leadership Development Program

DTIC Science & Technology

2012-08-30

technology-based competitive advantage can be part of firm’s business strategy.  Review the Porter Model . Return to Syllabus UNCLASSIFIED 66...Program 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7...PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Stevens Institute of Technology,Systems Engineering Research Center,Castle Point on the Hudson,Hoboken,NJ

Engineering Technology Programs. Preliminary Curriculum Planning Guide.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Developed as a resource to assist in a major revision underway in Georgia area technical schools to change curricula for preparing engineering technicians, this preliminary program-planning guide describes curriculum structures for specialized programs in three major areas--electronics, electromechanics, and mechanics. The handbook, which is…

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2011 CFR

2011-10-01

... description per calendar quarter, either during prime time or on children's programming; (2) Television... technical capability necessary to pass through the video description, unless using the technology for... video description per calendar quarter during prime time or on children's programming, on each channel...

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2010 CFR

2010-10-01

... description per calendar quarter, either during prime time or on children's programming; (2) Television... technical capability necessary to pass through the video description, unless using the technology for... video description per calendar quarter during prime time or on children's programming, on each channel...

The Development of a Materials Distribution Service for a Satellite-Based Educational Telecommunications Experiment. Satellite Technology Demonstration, Technical Report No. 0501.

ERIC Educational Resources Information Center

Lonsdale, Helen C.

Because 16mm film programs for classroom use are expensive and distribution is unpredictable, the Satellite Technology Demonstration (STD) established a Materials Distribution Service (MDS) to transmit material via satellite to rural sites in the Rocky Mountains. The STD leased 300 programs from Encyclopedia Britannica Educational Corporation and…

Trenholm State (AL) Technical College High School Science Enrichment Program 1996-1997 Evaluation Report

NASA Technical Reports Server (NTRS)

Ross, Elizabeth G.

1997-01-01

This document presents findings based on a third-year evaluation of Trenholm State (AL) Technical College's National Aeronautics and Space Administration (NASA) - supported High School Science Enrichment Program (HSSEP). HSSEP is an external (to school) program for area students from groups that are underrepresented in the mathematics, science, engineering and technology (MSET) professions. In addition to gaining insight into scientific careers, HSSEP participants learn about and deliver presentations that focus on mathematics applications, scientific problem-solving and computer programming during a seven-week summer or 10-week Academic-Year Saturday session.

Fossil Energy Program Annual Progress Report for the Period April 1, 2000 through March 31, 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkins, RR

This report covers progress made at Oak Ridge National Laboratory (ORNL) on research and development projects that contribute to the advancement of fossil energy technologies. Projects on the ORNL Fossil Energy Program are supported by the U.S. Department of Energy (DOE) Office of Fossil Energy, the DOE National Energy Technology Laboratory (NETL), the DOE Fossil Energy Clean Coal Technology (CCT) Program, the DOE National Petroleum Technology Office, and the DOE Fossil Energy Office of Strategic Petroleum Reserve (SPR). The ORNL Fossil Energy Program research and development activities cover the areas of coal, clean coal technology, gas, petroleum, and support tomore » the SPR. An important part of the Fossil Energy Program is technical management of all activities on the DOE Fossil Energy Advanced Research (AR) Materials Program. The AR Materials Program involves research at other DOE and government laboratories, at universities, and at industrial organizations.« less

Field Demonstration of Electro-Scan Defect Location Technology for Condition Assessment of Wastewater Collection Systems - Paper

EPA Science Inventory

A USEPA-sponsored field demonstration program was conducted to gather technically reliable cost and performance information on the electro-scan (FELL -41) pipeline condition assessment technology. Electro-scan technology can be used to estimate the magnitude and location of pote...

Technologies of the '80s: Their Impact on Technical Occupations.

ERIC Educational Resources Information Center

Jaffe, J. A., Ed.; And Others

This report is one of seven that identify major new and emerging technological advances expected to influence major vocational education program areas and to describe the programmatic implications in terms of skill-knowledge requirements, occupations most directly affected, and the anticipated diffusion rate. Chapter 1 considers technology as…

Status of ERA Vehicle System Integration Technology Demonstrators

NASA Technical Reports Server (NTRS)

Flamm, Jeffrey D.; Fernandez, Hamilton; Khorrami, Mehdi; James, Kevin D.; Thomas, Russell

2015-01-01

The Environmentally Responsible Aviation (ERA) Project within the Integrated Systems Research Program (ISRP) of the NASA Aeronautics Research Mission Directorate (ARMD) has the responsibility to explore and document the feasibility, benefits, and technical risk of air vehicle concepts and enabling technologies that will reduce the impact of aviation on the environment. The primary goal of the ERA Project is to select air vehicle concepts and technologies that can simultaneously reduce fuel burn, noise, and emissions. In addition, the ERA Project will identify and mitigate technical risk and transfer knowledge to the aeronautics community at large so that new technologies and vehicle concepts can be incorporated into the future design of aircraft.

10 CFR 611.103 - Application evaluation.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Technical Program Factors such as economic development and diversity in technology, company, risk, and... DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE... be reviewed to determine whether the applicant is eligible, the information required under § 611.101...

TECHNOLOGY EVALUATION REPORT, HYDROTECHNICS IN SITU FLOW SENSOR

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program evaluated performance of HydroTechnics, Inc. flow sensors in measuring the three-dimensional flow pattern created by operation of the Wasatch Environmental, Inc. (WEI) ground...

Hybrid Propulsion Technology Program, phase 1. Volume 2: Technical discussion

NASA Technical Reports Server (NTRS)

1989-01-01

Information on hybrid propulsion system concepts is given largely in the form of outlines, charts and graphs. Included are the concept definition, trade study data generation, concept evaluation and selection, conceptual design definition, and technology definition.

Photovoltaic Subcontract Program. Annual report, FY 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-03-01

This report summarizes the fiscal year (FY) 1992 progress of the subcontracted photovoltaic (PV) research and development (R&D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Crystalline Materials and Advanced Concepts project, the Polycrystalline Thin Films project, Amorphous Silicon Research project, the Photovoltaic Manufacturing Technology (PVMaT) project,more » PV Module and System Performance and Engineering project, and the PV Analysis and Applications Development project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1992, and future research directions.« less

Proceedings of the 1999 U.S. DOE Hydrogen Program Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

NREL

2000-08-28

The Proceedings of the 1999 US Department of Energy (DOE) Hydrogen Program Review serve as an important technology reference for the DOE Hydrogen Program. This document contains technical progress reports on 60 research and technology validation projects funded by the DOE Hydrogen Program in Fiscal Year 1999, in support of its mission to make hydrogen a cost-effective energy carrier for utility, building, and transportation applications. Each year, the Program conducts a rigorous review of its portfolio of projects, utilizing teams of experts to provide vital feedback on the progress of research.

NASA's 2004 Hall Thruster Program

NASA Technical Reports Server (NTRS)

Jacobson, David T.; Manzella, David H.; Hofer, Richard R.; Peterson, Peter Y.

2004-01-01

An overview of NASA's Hall thruster research and development tasks conducted during fiscal year 2004 is presented. These tasks focus on: raising the technology readiness level of high power Hall thrusters, developing a moderate-power/ moderate specific impulse Hall thruster, demonstrating high-power/high specific impulse Hall thruster operation, and addressing the fundamental technical challenges of emerging Hall thruster concepts. Programmatic background information, technical accomplishments and out year plans for each program element performed under the sponsorship of the In-Space Transportation Program, Project Prometheus, and the Energetics Project are provided.

System approach to modeling of industrial technologies

NASA Astrophysics Data System (ADS)

Toropov, V. S.; Toropov, E. S.

2018-03-01

The authors presented a system of methods for modeling and improving industrial technologies. The system consists of information and software. The information part is structured information about industrial technologies. The structure has its template. The template has several essential categories used to improve the technological process and eliminate weaknesses in the process chain. The base category is the physical effect that takes place when the technical process proceeds. The programming part of the system can apply various methods of creative search to the content stored in the information part of the system. These methods pay particular attention to energy transformations in the technological process. The system application will allow us to systematize the approach to improving technologies and obtaining new technical solutions.

UMIST, IDN, NTUA, TUM, ULB: A Successful European Exchange Programme.

ERIC Educational Resources Information Center

Borne, Pierre; Singh, Madan G.

1989-01-01

Describes the exchange programs that existed for a decade in the fields of automatic control and computer science including the University of Manchester Institute of Science and Technology, the "Institut Industriel du Nord," the National Technical University of Athens, the Technical University of Munich, and the Free University of…

Chicago Manufacturing Tech Prep. Fiscal Year 1991 Final Report.

ERIC Educational Resources Information Center

Chicago City Colleges, IL.

During its first year of development in 1991, the Chicago Manufacturing Technical Preparation (Tech Prep) Program established a plan for implementing an industry-driven, articulated 4-year manufacturing technology course of study that integrates applied academic courses with technical courses and meets industry hiring standards. The project…

Modular Radioisotope Thermoelectric Generator (RTG) Program. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-12-31

Section 2.0 of this report summarizes the MOD-RTG reference flight design, and Section 3.0 discusses the Ground Demonstration System design. Multicouple technology development is discussed in Section 4.0, and Section 5.0 lists all published technical papers prepared during the course of the contract.

CIVIL ENGINEERING TECHNOLOGY CONSULTANTS' WORKSHOP, REPORT OF PROCEEDINGS (ATLANTA, MAY 17-20, 1967).

ERIC Educational Resources Information Center

DOBROVOLNY, JERRY S.

THIS REPORT ATTEMPTS TO SHOW ADMINISTRATORS OF JUNIOR COLLEGES, TECHNICAL INSTITUTES, AND GOVERNMENT OR INDUSTRIAL TRAINING PROGRAMS CERTAIN CRITICAL PROBLEMS IN THE TRAINING OF CIVIL ENGINEERING TECHNICIANS. THE PHILOSOPHY OF TECHNICAL EDUCATION REQUIRES ATTENTION AS DOES THE IDENTIFICATION OF STUDENTS WHO CAN BENEFIT FROM AND SUCCESSFULLY…

Mathematics, Engineering Science Achievement (MESA). Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

Growing Science, Technology, Education, and Mathematics (STEM) talent Washington MESA--Mathematics Engineering Science Achievement--helps under-represented community college students excel in school and ultimately earn STEM bachelor's degrees. MESA has two key programs: one for K-12 students, and the other for community and technical college…

75 FR 33659 - ITS Joint Program Office; IntelliDriveSM

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-14

... IntelliDrive\\SM\\ safety technical and policy research roadmaps. The workshop will be held on July 20-22... first day of the workshop will provide a detailed discussion of the technical research activities within... Workshop AGENCY: Research and Innovative Technology Administration, U.S. Department of Transportation...

Making Advanced Computer Science Topics More Accessible through Interactive Technologies

ERIC Educational Resources Information Center

Shao, Kun; Maher, Peter

2012-01-01

Purpose: Teaching advanced technical concepts in a computer science program to students of different technical backgrounds presents many challenges. The purpose of this paper is to present a detailed experimental pedagogy in teaching advanced computer science topics, such as computer networking, telecommunications and data structures using…

Developing Literacy for the Vocational-Technical Trades.

ERIC Educational Resources Information Center

Penisten, John

The University of Hawaii at Hilo offers a vocational-technical occupational reading curriculum that encourages literacy for technology. The program is geared to meet the special needs of enrollees in the university's trade and industry division, most of whom are postsecondary open-admission students. Most have poor reading skills, averaging a…

U.S.-Japan Codevelopment Review of the FS-X Program

DTIC Science & Technology

1990-02-06

ion Stressed Quality and Quantity 13 \\Work-Share and Teclmology Flowback Section 2 15 FS-X Consultation and smm<, 15 Coordination I)OD’s (’C)nls tlat...was established); Technology Flowback • obtain free and automatic flowback of any technical improvements that .Japan made to the baseline aircraft, for...and about 40 per- cent of production work share. • Technology flowback provisions allow U .S. access to Japanese technologies. * Program strives to

Debris mapping sensor technology project summary: Technology flight experiments program area of the space platforms technology program

NASA Technical Reports Server (NTRS)

1991-01-01

The topics presented are covered in viewgraph form. Programmatic objectives are: (1) to improve characterization of the orbital debris environment; and (2) to provide a passive sensor test bed for debris collision detection systems. Technical objectives are: (1) to study LEO debris altitude, size and temperature distribution down to 1 mm particles; (2) to quantify ground based radar and optical data ambiguities; and (3) to optimize debris detection strategies.

Embedded Thermal Control for Spacecraft Subsystems Miniaturization

NASA Technical Reports Server (NTRS)

Didion, Jeffrey R.

2014-01-01

Optimization of spacecraft size, weight and power (SWaP) resources is an explicit technical priority at Goddard Space Flight Center. Embedded Thermal Control Subsystems are a promising technology with many cross cutting NSAA, DoD and commercial applications: 1.) CubeSatSmallSat spacecraft architecture, 2.) high performance computing, 3.) On-board spacecraft electronics, 4.) Power electronics and RF arrays. The Embedded Thermal Control Subsystem technology development efforts focus on component, board and enclosure level devices that will ultimately include intelligent capabilities. The presentation will discuss electric, capillary and hybrid based hardware research and development efforts at Goddard Space Flight Center. The Embedded Thermal Control Subsystem development program consists of interrelated sub-initiatives, e.g., chip component level thermal control devices, self-sensing thermal management, advanced manufactured structures. This presentation includes technical status and progress on each of these investigations. Future sub-initiatives, technical milestones and program goals will be presented.

Defense Science and Technology Strategy

DTIC Science & Technology

1994-09-01

I 3 IV. The Science and Technology Program .................... 15 Advanced Concept Technology Demomstrations...product and process concepts that pcrmit us to tailor, modify, and optimize the manufactUriiig process; develop sensors a-t i~a Mcrials that will detect...It can be used during concept formulations to expand the range of technical, operational, and system alternatives evaluated. The technology can

Ocean energy program summary. Volume 2: Research summaries

NASA Astrophysics Data System (ADS)

1990-01-01

The oceans are the world's largest solar energy collector and storage system. Covering 71 percent of the earth's surface, this stored energy is realized as waves, currents, and thermal salinity gradients. The purpose of the Federal Ocean Energy Technology (OET) Program is to develop techniques that harness this ocean energy in a cost effective and environmentally acceptable manner. The OET Program seeks to develop ocean energy technology to a point where the commercial sector can assess whether applications of the technology are viable energy conversion alternatives or supplements to systems. Past studies conducted by the U.S. Department of Energy (DOE) have identified ocean thermal energy conversion (OTEC) as the largest potential contributor to United States energy supplies from the ocean resource. As a result, the OET Program concentrates on research to advance OTEC technology. Current program emphasis has shifted to open-cycle OTEC power system research because the closed-cycle OTEC system is at a more advanced stage of development and has already attracted industrial interest. During FY 1989, the OET Program focused primarily on the technical uncertainties associated with near-shore open-cycle OTEC systems ranging in size from 2 to 15 MW(sub e). Activities were performed under three major program elements: thermodynamic research and analysis, experimental verification and testing, and materials and structures research. These efforts addressed a variety of technical problems whose resolution is crucial to demonstrating the viability of open-cycle OTEC technology. This publications is one of a series of documents on the Renewable Energy programs sponsored by the U.S. Department of Energy. An overview of all the programs is available, entitled Programs in Renewable Energy.

Developing a Community Based Pre-College Medical Science Collaborative.

ERIC Educational Resources Information Center

Shagam, Janet Yagoda

Designed to assist secondary and post-secondary educators develop community interactive science programs, this manual describes steps undertaken at New Mexico's Albuquerque Technical Vocational Institute to develop pre-college medical science programs that encourage local high school students to consider the college's medical technology program.…

Biological and Chemical Technologies Research at OIT: Annual Summary Report, FY 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, G.

1998-03-01

The annual summary report presents the fiscal year (FY) 1 997 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program. This BCTR program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1997 (ASR 97) contains the following: program description (including BCTR program mission statement, historical background, relevance, goals and objectives); program structure and organization; selected technical and programmatic highlights for 1 997; detailed descriptions of individual projects; and a listing of program output, including amore » bibliography of published work, patents, and awards arising from work supported by the program.« less

Technology transfer to a developing nation, Korea

NASA Technical Reports Server (NTRS)

Stone, C. A.; Uccetta, S. J.

1973-01-01

An experimental project is reported which was undertaken. to determine if selected types of technology developed for the aerospace program during the past decade are relevant to specific industrial problems of a developing nation and to test whether a structured program could facilitate the transfer of relevant technologies. The Korea Institute of Science and Technology and the IIT Research Institute were selected as the active transfer agents to participate in the program. The pilot project was based upon the approach to the transfer of domestic technology developed by the NASA Technology Utilization Division and utilized the extensive data and technical resources available through the Space Agency and its contractors. This pilot project has helped to clarify some aspects of the international technology transfer process and to upgrade Korean technological capabilities.

A Concept of Operations for an Integrated Vehicle Health Assurance System

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Ross, Richard W.; Berger, David E.; Lekki, John D.; Mah, Robert W.; Perey, Danie F.; Schuet, Stefan R.; Simon, Donald L.; Smith, Stephen W.

2013-01-01

This document describes a Concept of Operations (ConOps) for an Integrated Vehicle Health Assurance System (IVHAS). This ConOps is associated with the Maintain Vehicle Safety (MVS) between Major Inspections Technical Challenge in the Vehicle Systems Safety Technologies (VSST) Project within NASA s Aviation Safety Program. In particular, this document seeks to describe an integrated system concept for vehicle health assurance that integrates ground-based inspection and repair information with in-flight measurement data for airframe, propulsion, and avionics subsystems. The MVS Technical Challenge intends to maintain vehicle safety between major inspections by developing and demonstrating new integrated health management and failure prevention technologies to assure the integrity of vehicle systems between major inspection intervals and maintain vehicle state awareness during flight. The approach provided by this ConOps is intended to help optimize technology selection and development, as well as allow the initial integration and demonstration of these subsystem technologies over the 5 year span of the VSST program, and serve as a guideline for developing IVHAS technologies under the Aviation Safety Program within the next 5 to 15 years. A long-term vision of IVHAS is provided to describe a basic roadmap for more intelligent and autonomous vehicle systems.

Advanced Technology Composite Fuselage: Program Overview

NASA Technical Reports Server (NTRS)

Ilcewicz, L. B.; Smith, P. J.; Hanson, C. T.; Walker, T. H.; Metschan, S. L.; Mabson, G. E.; Wilden, K. S.; Flynn, B. W.; Scholz, D. B.; Polland, D. R.;

Vocational and Applied Technology Education Annual Performance Report for Program Year 1994. Submitted to the United States Secretary of Education under the Provisions of Public Law 101-392, the Carl D. Perkins Vocational and Applied Technology Education Act.

ERIC Educational Resources Information Center

Texas Education Agency, Austin.

Approximately 1 million individuals in Texas participated in career and technical programs, services, and activities offered at the secondary, postsecondary, and adult levels of education by public schools and community colleges in program year 1994. Secondary core standards and measures of performance were adopted in 1993. Sixty-nine federally…

SAM Technical Review Committee Final Report: Summary and Key Recommendations from the Onsite TRC Meeting Held April 22-23, 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blair, N.; Dobos, S.; Janzou, S.

2013-08-01

The System Advisor Model (SAM) is a broad and robust set of models and frameworks for analyzing both system performance and system financing. It does this across a range of technologies dominated by solar technologies including photovoltaics (PV) and concentrated solar power (CSP). The U.S. Department of Energy (DOE) Solar Energy Technology Program requested the SAM development team to review the photovoltaic performance modeling with the development community and specifically, with the independent engineering community. The report summarizes the major effort for this technical review committee (TRC).

For Drafting Programs--Computer Graphics in Industrial Tech.

ERIC Educational Resources Information Center

Sutliff, Ron

1980-01-01

Posits that computer-aided drafting and design should be introduced to students in industrial technology programs. Discusses ways the technical educator can get involved in computer graphics to familiarize students with it without a large outlay of money. (JOW)

Transition of the Course Programs in the 40 Years History of Hitachi Institute of Technology

NASA Astrophysics Data System (ADS)

Miura, Osamu; Katsura, Koyo; Takahashi, Masahiko

In 2010, the Hitachi Institute of Technology reached the 40th anniversary. In the beginning, the institute stood at the product-out-oriented view point and carried out extensive technical education from basis to advanced technology. After the 1990s, transition of the business environment with the globalization caused that the needs of the engineer education required by the business sections have been transformed. As the result, the changes of needs have been reflected for course program of the institute. Nowadays, in addition to the conventional course programs, the engineer education programs for the business competency and human skill have also been focused.

Status of shuttle fuel cell technology program.

NASA Technical Reports Server (NTRS)

Rice, W. E.; Bell, D., III

1972-01-01

The hydrogen-oxygen fuel cell has been proved as an efficient and reliable electrical power supply for NASA manned-space-flight vehicles. It has thus ensured a role in the Space Shuttle Program as the primary electrical power supply for the Orbiter vehicle. The advanced fuel cell technology programs conducted under the management of the NASA Manned Spacecraft Center over the past two years have resulted in a high level of technical readiness in fuel cell power generation to support shuttle mission requirements. These programs have taken advantage of technological developments that have occurred since the designs were completed for the Gemini and Apollo fuel cells.

77 FR 54163 - Health Information Technology: Standards, Implementation Specifications, and Certification...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

...With this final rule, the Secretary of Health and Human Services adopts certification criteria that establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology will need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This final rule also makes changes to the permanent certification program for health information technology, including changing the program's name to the ONC HIT Certification Program.

Beyond Coordination: Joint Planning and Program Execution. The IHPRPT Materials Working Group

NASA Technical Reports Server (NTRS)

Stropki, Michael A.; Cleyrat, Danial A.; Clinton, Raymond G., Jr.; Rogacki, John R. (Technical Monitor)

2000-01-01

"Partnership is more than just coordination," stated then-Commander of the Air Force Research Laboratory (AFRL), Major General Dick Paul (USAF-Ret), at this year's National Space and Missile Materials Symposium. His comment referred to the example of the joint planning and program execution provided by the Integrated High Payoff Rocket Propulsion Technology (IHPRPT) Materials Working Group (IMWG). Most people agree that fiscal pressures imposed by shrinking budgets have made it extremely difficult to build upon our existing technical capabilities. In times of sufficient budgets, building advanced systems poses no major difficulties. However, with today's budgets, realizing enhanced capabilities and developing advanced systems often comes at an unaffordable cost. Overcoming this problem represents both a challenge and an opportunity to develop new business practices that allow us to develop advanced technologies within the restrictions imposed by current funding levels. Coordination of technology developments between different government agencies and organizations is a valuable tool for technology transfer. However, rarely do the newly developed technologies have direct applicability to other ongoing programs. Technology requirements are typically determined up-front during the program planning stage so that schedule risk can be minimized. The problem with this process is that the costs associated with the technology development are often borne by a single program. Additionally, the potential exists for duplication of technical effort. Changing this paradigm is a difficult process but one that can be extremely worthwhile should the right opportunity arise. The IMWG is one such example where NASA, the DoD, and industry have developed joint requirements that are intended to satisfy multiple program needs. More than mere coordination, the organizations comprising the group come together as partners, sharing information and resources, proceeding from a joint roadmap.

Mars Science Laboratory Focused Technology Program Overview

NASA Technical Reports Server (NTRS)

Udomkesmalee, Gabriel Souraphol; Hayati, Samad A.

2005-01-01

This paper describes how the MSL-FT program functions to ensure that the needed technology is identified, developed, matured to TRL 6, and infused in the MSL mission, in a systematic fashion that will meet the mission's objectives innovatively and within budget. The paper describes the mission's technical and project challenges, and outlines the process, procedures, tools and people involved in meeting those challenges. The paper also discusses the technology certification process required to demonstrate that technology deliverables perform adequately and in a predictable fashion to successful infusion into the MSL Flight System.

Xenon Feed System Progress

DTIC Science & Technology

2006-01-01

From - To) 13-06-2006 Technical Paper 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER F04611-00-C-0055 Xenon Feed System Progress (Preprint) 5b. GRANT...propulsion xenon feed system for a flight technology demonstration program. Major accomplishments include: 1) Utilization of the Moog...successfully fed xenon to a 200 watt Hall Effect Thruster in a Technology Demonstration Program. The feed system has demonstrated throttling of xenon

Integral Engine Inlet Particle Separator. Volume 1. Technology Program

DTIC Science & Technology

1975-07-01

inlet particle separators for future Army aircraft gas turbine engines . Appropriate technical personnel of this Directorate have reviewed this report...USAAMRDL-TR-75-31A I - / INTEGRAL ENGINE INLET PARTICLE SEPARATOR Volume I-- Technology Program General Electric Company Aircraft Engine Group...N1 i 9ap mm tm~qu INTRODUCTION The adverse environments in which Army equipment operates impose severe )enalties upon gas turbine engine performance

Tanks Focus Area site needs assessment FY 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report documents the process used by the Tanks Focus Area (TFA) to analyze and develop responses to technology needs submitted by four major US Department of Energy (DOE) sites with radioactive tank waste problems, and the initial results of the analysis. The sites are the Hanford Site, Idaho National Engineering and Environmental Laboratory (INEEL), Oak Ridge Reservation (ORR), and Savannah River Site (SRS). This document describes the TFA`s process of collecting site needs, analyzing them, and creating technical responses to the sites. It also summarizes the information contained within the TFA needs database, portraying information provided by four majormore » DOE sites with tank waste problems. The overall TFA program objective is to deliver a tank technology program that reduces the current cost, and the operational and safety risks of tank remediation. The TFA`s continues to enjoy close, cooperative relationships with each site. During the past year, the TFA has fostered exchanges of technical information between sites. These exchanges have proven to be healthy for all concerned. The TFA recognizes that site technology needs often change, and the TFA must be prepared not only to amend its program in response, but to help the sites arrive at the best technical approach to solve revised site needs.« less

FY04 Engineering Technology Reports Technology Base

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharpe, R M

2005-01-27

Lawrence Livermore National Laboratory's Engineering Directorate has two primary discretionary avenues for its investment in technologies: the Laboratory Directed Research and Development (LDRD) program and the ''Tech Base'' program. This volume summarizes progress on the projects funded for technology-base efforts in FY2004. The Engineering Technical Reports exemplify Engineering's more than 50-year history of researching and developing (LDRD), and reducing to practice (technology-base) the engineering technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence, and has prepared for this role with a skilled workforce and technicalmore » resources. This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply those technologies, or adapt them to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Tech Base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. The objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; and (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, focus and guide longer-term investments within Engineering. The Centers attract and retain top staff, develop and maintain critical core technologies, and enable programs. Through their technology-base projects, they oversee the application of known engineering approaches and techniques to scientific and technical problems. The Centers and their Directors are as follows: (1) Center for Computational Engineering: Robert M. Sharpe; (2) Center for Microtechnology and Nanotechnology: Raymond P. Mariella, Jr. (3) Center for Nondestructive Characterization: Harry E. Martz, Jr.; (4) Center for Precision Engineering: Keith Carlisle; and (5) Center for Complex Distributed Systems: Gregory J. Suski, Acting Director.« less

NASA-UVA light aerospace alloy and structures technology program (LA2ST)

NASA Technical Reports Server (NTRS)

Gangloff, Richard P.; Starke, Edger A., Jr.

1996-01-01

This progress report covers achievements made between January 1 and June 30, 1966 on the NASA-UVA Light Aerospace Alloy and Structures Technology (LA2ST) Program. The objective of the LA2ST Program is to conduct interdisciplinary graduate student research on the performance of next generation, light-weight aerospace alloys, composites and thermal gradient structures in collaboration with NASA-Langley researchers. Specific technical objectives are presented for each research project. . The accomplishments presented in this report are: (1) Mechanical and Environmental Degradation Mechanisms in Advanced Light Metals, (2) Aerospace Materials Science, and (3) Mechanics of Materials for Light Aerospace Structures. Collective accomplishments between January and June of 1996 include: 4 journal or proceedings publications, 1 NASA progress report, 4 presentations at national technical meetings, and 2 PhD dissertations published.

Overview of the NASA Systems Approach to Crashworthiness Program

NASA Technical Reports Server (NTRS)

Jones, Lisa E.

2002-01-01

The NASA Aviation Safety Program was developed in response to the federal government's goal to reduce the fatal accident rate for aviation by 80% within 10 years. Accident Mitigation is a primary element of the Aviation Safety Program. The overall Accident Mitigation goal is to provide technology to the air transport industry to enable a decrease in the rate of fatalities and injury from crash loads and from in-flight and post-crash explosion and/or fire. Accident Mitigation is divided into two main elements - Fire Prevention and Systems Approach to Crashworthiness. The Systems Approach to Crashworthiness goal is to develop and promote technology that will increase the human survival rate or reduce the fatality rate in survivable accidents. The technical background and planning, selected technical activities, and summary of future efforts will be presented in this paper.

42 CFR 486.104 - Condition for coverage: Qualifications, orientation and health of technical personnel.

Code of Federal Regulations, 2010 CFR

2010-10-01

...), or (4) of this section: (1) Successful completion of a program of formal training in X-ray technology in a school approved by the Joint Review Committee on Education in Radiologic Technology (JRCERT), or have earned a bachelor's or associate degree in radiologic technology from an accredited college or...

The Training and Technology Project Experimental Research Program for Vocational-Technical Teachers. Final Report.

ERIC Educational Resources Information Center

Merrill, E.L.; Russell, Wendell H.

Over a 31-month period from June 1966 to December 1968, the University of Tennessee and Union Carbide Corporation conducted preservice and inservice institutes for 160 industrial education teachers. These institutes carried college credit and covered Mechanical Technology and Drafting, Industrial Electronics Technology, Machine Shop and…

Preparing for a New Century: Information Technology Workforce Needs.

ERIC Educational Resources Information Center

Teeter, Thomas A.; Bailey, Janet L.; Cherepski, Don D.; Faucett, John; Hines, Robert J.; Jovanovic, Nickolas S.; Tschumi, Pete; Walker, Jeffery T.; Watson, Gretchen B.

The purpose of this project was to determine workforce needs in the new information technology/knowledge-based world in order to design a coherent minor program in information technology at the University of Arkansas at Little Rock for the non-technically oriented college student. The process consisted of three phases: site visits to five…

Preparing for High Technology: Strategies for Change.

ERIC Educational Resources Information Center

Faddis, Constance; And Others

In order to help postsecondary technical colleges to keep abreast of changing technology, a study was conducted (1) to investigate the current and future status of three high technology areas in terms of their impacts on occupations, labor demand, and training requirements; and (2) to provide guidelines to help colleges change their programs to…

The Success of Advanced Learning Technologies for Instruction: Research and Evaluation of Human Factors Issues.

ERIC Educational Resources Information Center

Coldeway, Dan O.

2002-01-01

Data from three graduate programs using advanced learning technologies (ALTs) identified important human factors issues in technology use in three categories: learners (needs, skills, support, and motivation related to ALTs); faculty (attitudes, skills, support, and motivation related to ALTs); and technical staff (methods of providing assistance,…

Civil Technology Applications. Teacher Edition [and] Student Edition.

ERIC Educational Resources Information Center

Schertz, Karen

Teacher and student editions of Civil Technology Applications are one in a series of competency-based instructional materials for drafting and civil technology programs. It includes the technical content and tasks necessary for a student to be employed as a drafter or civil technician in a civil engineering firm. Introductory pages in the teacher…

Technology Professional Development and Instructional Technology Integration among Part-Time Faculty at Illinois Community Colleges

ERIC Educational Resources Information Center

Roohani, Behnam

2014-01-01

This study focused on exploring Illinois community college faculty development coordinators' perceptions about how they are implementing faculty technology professional development programs and providing technical support for part-time faculty in the Illinois community college systems. Also examined were part-time faculty perceptions of the degree…

CVX Damage Control Information Technology Evolutionary Model

DTIC Science & Technology

1999-03-01

technology -based learning generally) may be exciting technically, it does not automatically lead to better educational programs. Good instructional design...expected to act on the first Aircraft Carrier to attempt substantial manning reductions if nothing is learned from Smart Ship. Beyond the technologies ... technology of the day. Many of the lessons learned then are in use today. However, technology breakthroughs we are now experiencing invite us to

Metals and Ceramics Division progress report for period ending December 31, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craig, D.F.; Weir, J.R. Jr.

1993-04-01

This report provides a brief overview of the activities and accomplishments of the division, whose purpose is to provide technical support, primarily in the area of high-temperature materials, for the various technologies being developed by US DOE. Activities range from basic research to industrial research and technology transfer. The division (and the report) is divided into the following: Engineering materials, high-temperature materials, materials science, ceramics, nuclear fuel materials, program activities, collaborative research facilities and technology transfer, and educational programs.

Applications of satellite and marine geodesy to operations in the ocean environment

NASA Technical Reports Server (NTRS)

Fubara, D. M.; Mourad, A. G.

1975-01-01

The requirements for marine and satellite geodesy technology are assessed with emphasis on the development of marine geodesy. Various programs and missions for identification of the satellite geodesy technology applicable to marine geodesy are analyzed along with national and international marine programs to identify the roles of satellite/marine geodesy techniques for meeting the objectives of the programs and other objectives of national interest effectively. The case for marine geodesy is developed based on the extraction of requirements documented by authoritative technical industrial people, professional geodesists, government agency personnel, and applicable technology reports.

TARGETED TECHNOLOGY TRANSFER TO US INDEPENDENTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donald F. Duttlinger; E. Lance Cole

2005-01-01

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of assisting U.S. independent oil and gas producers with timely, informed technology decisions during Fiscal Year 2004 (FY04). PTTC has active grassroots programs through its 10 Regional Lead Organizations (RLOs) and 2 satellite offices. They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, technical publications and other cooperative outreach efforts. PTTC's Headquarters (HQ) staff receives direction from a National Board of Directors predominantly comprised ofmore » American natural gas and oil producers to plan and manage the overall technology transfer program. PTTC HQ implements a comprehensive communications program by interconnecting the talents of the National Board, 10 Regional Producer Advisory Groups (PAG) and the RLOs with industry across the U.S. PTTC effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy, namely the Strategic Center for Natural Gas and Oil with state and industry contributions to share application of upstream technologies. Ultimately, these efforts factor in to provide a safe, secure and reliable energy supply for American consumers. This integrated resource base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results regarding domestic production figures. PTTC is increasingly recognized as a critical resource for information and access to technologies by providing direct contact with research, development and demonstration (RD&D) results. A key to the program is demonstrating proven technologies that can be applied broadly and rapidly. This technical progress report summarizes PTTC's accomplishments during FY04. Activities remained at high levels. Board and staff interaction has defined strategic thrusts to further outreach. Networking, involvement in technical activities and an active exhibit schedule are increasing PTTC's sphere of influence with both producers and the service sector. PTTC's reputation for unbiased bottom line information stimulates cooperative ventures with other organizations. Efforts to build the contact database and a growing E-mail Technology Alert service are expanding PTTC's audience.« less

Partnerships Take a New Turn.

ERIC Educational Resources Information Center

Rich, Don

1983-01-01

Milwaukee Area Technical College has joined with business and industry to develop training programs for computer-based information processing, and engineering and manufacturing technologies. These partnerships are important as companies look for ways to improve productivity and quality, keep abreast of changing technology, and ensure economic…

Industrial Maintenance Technology (IM-TEC). Student Manual.

ERIC Educational Resources Information Center

Fusch, Gene E.

This student manual explains an innovative strategy through which Bellingham Technical College's (Washington) evening Industrial Electrician and Millwright Apprenticeships were aggregated with workforce upgrade course offerings to form the college's first evening degree program in Industrial Maintenance Technology (IM-TEC). Section 1 contains a…

Data systems and computer science space data systems: Onboard networking and testbeds

NASA Technical Reports Server (NTRS)

Dalton, Dan

1991-01-01

The technical objectives are to develop high-performance, space-qualifiable, onboard computing, storage, and networking technologies. The topics are presented in viewgraph form and include the following: justification; technology challenges; program description; and state-of-the-art assessment.

Stanford university medical media and information technologies hosts open source surgical simulation workshop.

PubMed

Cornelius, Craig W; Heinrichs, Leroy; Youngblood, Patricia; Dev, Parvati

2007-01-01

Stanford University Medical Media and Information Technologies's technical workshop "Prototyping of Surgical Simulators using Open Source Simulation Software" was held in August 2006 at Stanford University. The objectives, program, and topics covered are presented in this short report.

Pioneering Partnerships for Progress

ERIC Educational Resources Information Center

Borden, Sam

2006-01-01

This paper presents a brief description of the Center for Bioscience and the Integration of Computer and Telecommunications Technology (BioCATT) at Gateway Technical College in Kenosha, Wisconsin. BioCATT is designed to serve as a catalyst for innovation in educational programming, business services, and technology applications.

East Europe Report

DTIC Science & Technology

1986-01-29

fulfillment of planned parameters, and must see to it that the programs for research and technological development will be fully imple- mented. The...productivity by developing and introducing new technology and raising the technological level, and the quality of products; -- developing cooperation in...production, :science, and technology , with -a view to accelerating scientific-technical pro.,res:s, this bei.ng a basic contlition for an intensive

Government-Sponsored Programs on Structures Technology

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

1997-01-01

This document contains the presentations from the joint UVA/AIAA workshops on Government-Sponsored Programs on Structures Technology, held on April 6, 1997 in Kissimmee, Florida and on September 4, 1997 in Hampton, Virginia. Workshop attendees were the Members and Friends of the AIAA Structures Technical Committee. The objectives of the workshops were to: (a) provide a forum for discussion of current government-sponsored programs in the structures area; (b) identify high-potential research areas for future aerospace systems; and (c) initiate suitable interaction mechanisms with the managers of structures programs.

NASA's Management and Utilization of the Small Business Innovative Research (SBIR) Program

NASA Technical Reports Server (NTRS)

Mexcur, Winfield Paul

2003-01-01

The United Space Congress established the SBIR program in 1982 for the following purposes: ( 1) Stimulate technological innovation (2) Increase private-sector commercialization derived from federal R&D (3) Use small business to meet federal R&D needs (4) Foster and encourage participation by disadvantaged persons and women in technological innovation The STTR program was established in 1992 with the additional requirement of having a small business partner with a research institution (usually a university) for the purpose of transferring intellectual property from the research institution to the small business concern for enabling a government technical need and furthering the technological development for the purpose of developing commercial products. The government of Japan has established a program that models portions of the U.S. SBIR and STTR programs. They are very interested in how NASA has been so successful in fulfilling the Congressional objectives of these programs. In particular, they want to understand the management practices and incentives that are provided to enable partnerships between business enterprises, academia and government. The speech will also focus on some of the many successful technologies (on a conceptual level) that have been developed through NASA s SBIR and STTR programs and mechanisms used to promote cooperation between small businesses, large businesses, academia and government agencies within the United States. The speech is on a conceptual level, focusing on U.S. and NASA policies and management implementation practices. No enabling technical discussion will be held.

Engineering Programs of Tomorrow: The Role of Agricultural Engineering.

ERIC Educational Resources Information Center

Edwards, Donald M.

Due to rapid growth of societal and technological endeavors, engineers of the future will require greater technical competence. At the same time, engineering will become more people oriented with greater emphasis placed on people input into decision making. As a result, engineering education must not only provide improved technical education but…

Printing/Graphic Arts Technology. Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the Committee's assignment. This report presents a task list that reflects current trends…

Training Program for Teachers of Technical Mathematics in Two-Year Curricula.

ERIC Educational Resources Information Center

Queensborough Community Coll., Bayside, NY.

This handbook is designed to assist teachers of technical mathematics in developing practically-oriented curricula for their students. The underlying assumption is that, while technology students are not a breed apart, their needs and orientation are to the concrete, rather than the abstract. It describes the nature, scope, and content of…

Professional Development in Career and Technical Education. In Brief: Fast Facts for Policy and Practice No. 7.

ERIC Educational Resources Information Center

Maurer, Matthew J.

The continuous transformation of career and technical education (CTE) practitioners' roles that has resulted from reforms, technological advances, and new certification requirements has necessitated the creation of learner-centered professional development (PD) programs. Numerous schools nationwide have succeeded in developing high-quality,…

Basic EMC Technology Advancement for C3 Systems - Model Revision for IEMCAP. Volume 5

DTIC Science & Technology

1984-10-01

important asset. 126 REFERENCES [1] J. L. Bogdanor , et. al., Inttasystem Electromagnetic Compatibility Analy- sis Program, Technical Report, RADC-TR-74...Method of Moments, Technical Report, RADC-TR-82-286, Vol. IV A, Rome Air Development Center, Griffiss AFB, NY, November 1982. [30] J. B. Bogdanor , M. D

The Technical School: College and University Interface in Teaching Fiber, Textile, and Polymer Chemistry

ERIC Educational Resources Information Center

Roberts, Carleton W.

1973-01-01

Discusses the present status of technician and technology-oriented institutions and the two curricula offered by the Textile Department, Clemson University. Indicates that technical school, junior college, and community college graduates are allowed to complete formal training to the four-year degree level in the Clemson program. (CC)

[Operation/Maintenance of Fiber Placement Machine

NASA Technical Reports Server (NTRS)

Pelham, L.; Dillard, T.

2000-01-01

NASA contract NAS8-39749 was completed in January 2000. The contract period of performance covered six (6) years and included basic program technical support as required by NASA with up to thirty (30) different technical directives identified and issued by NASA for specific Advanced Composite Technology tasks during the course of the contract.

The $2000 Electric Powertrain Option-1 Program. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1999-06-01

This report describes the tasks accomplished as part of Northrop Grumman's TRP $2000 Electric Powertrain Option-1 program. Northrop Grumman has strived to achieve technology advances and development considered as high priority to the success of future electric vehicles. Northrop Grumman has achieved the intent of the program by taking several steps toward reducing the cost of the electric vehicle powertrain, demonstrating technologies in the form of hardware and introducing enhancements into production that are consistent with the needs of the market.

A systematic assessment of the state of hazardous waste clean-up technologies. Quarterly technical progress report, April 1--June 30, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, M.T.; Reed, B.E.; Gabr, M.

1993-07-01

West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Report for Year 1 of the Agreement. This report reflects the progress and/or efforts performed on the following nine technical projects encompassed by the Year 1 Agreement for the period of April 1 through June 30, 1993: Systematic assessment of the state of hazardous waste clean-up technologies; site remediation technologies -- drain-enhanced soil flushingmore » (DESF) for organic contaminants removal; site remediation technologies -- in situ bioremediation of organic contaminants; excavation systems for hazardous waste sites; chemical destruction of polychlorinated biphenyls; development of organic sensors -- monolayer and multilayer self-assembled films for chemical sensors; Winfield lock and dam remediation; Assessments of Technologies for hazardous waste site remediation -- non-treatment technologies and pilot scale test facility implementation; and remediation of hazardous sites with stream reforming.« less

1995 Laboratory-Directed Research and Development Annual report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cauffman, D.P.; Shoaf, D.L.; Hill, D.A.

1995-12-31

The Laboratory-Directed Research and Development Program (LDRD) is a key component of the discretionary research conducted by Lockheed Idaho Technologies Company (Lockheed Idaho) at the Idaho National Engineering Laboratory (INEL). The threefold purpose and goal of the LDRD program is to maintain the scientific and technical vitality of the INEL, respond to and support new technical opportunities, and enhance the agility and flexibility of the national laboratory and Lockheed Idaho to address the current and future missions of the Department of Energy.

Perspective on the National Aero-Space Plane Program instrumentation development

NASA Technical Reports Server (NTRS)

Bogue, Rodney K.; Erbland, Peter

1993-01-01

A review of the requirement for, and development of, advanced measurement technology for the National Aerospace Plane program is presented. The objective is to discuss the technical need and the program commitment required to ensure that adequate and timely measurement capabilities are provided for ground and flight testing in the NASP program. The scope of the measurement problem is presented, the measurement process is described, how instrumentation technology development has been affected by NASP program evolution is examined, the national effort to define measurement requirements and assess the adequacy of current technology to support the NASP program is discussed, and the measurement requirements are summarized. The unique features of the NASP program that complicate the understanding of requirements and the development of viable solutions are illustrated.

AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petersen, G.; Bair, K.; Ross, J.

1994-03-01

The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listingmore » of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.« less

Final Scientifc Report - Hydrogen Education State Partnership Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leon, Warren

2012-02-03

Under the leadership of the Department of Energy Hydrogen and Fuel Cells program, Clean Energy States Alliance (CESA) educated and worked with state leaders to encourage wider deployment of fuel cell and hydrogen technologies. Through outreach to state policymakers, legislative leaders, clean energy funds, energy agencies, and public utility commissions, CESA worked to accomplish the following objectives of this project: 1. Provide information and technical assistance to state policy leaders and state renewable energy programs in the development of effective hydrogen fuel cell programs. 2. Identify and foster hydrogen program best practices. 3. Identify and promote strategic opportunities for statesmore » and the Department of Energy (DOE) to advance hydrogen technology deployment through partnerships, collaboration, and targeted activities. Over the three years of this project, CESA, with our partner National Conference of State Legislatures (NCSL), was able to provide credible information on fuel cell policies, finance, and technical assistance to hundreds of state officials and other stakeholders. CESA worked with its membership network to effectively educate state clean energy policymakers, program managers, and decision makers about fuel cell and hydrogen technologies and the efforts by states to advance those technologies. With the assistance of NCSL, CESA gained access to an effective forum for outreach and communication with state legislators from all 50 states on hydrogen issues and policies. This project worked to educate policymakers and stakeholders with the potential to develop and deploy stationary and portable fuel cell technologies.« less

Guidelines for Implementation of an Advanced Outage Control Center to Improve Outage Coordination, Problem Resolution, and Outage Risk Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

St. Germain, Shawn W.; Farris, Ronald K.; Whaley, April M.

This research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by Department of Energy (DOE) and performed in close collaboration with industry R&D programs that provide the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRS program serves to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The purpose of this research is to improve management of nuclear powermore » plant (NPP) outages through the development of an advanced outage control center (AOCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. This technical report for industry implementation outlines methods and considerations for the establishment of an AOCC. This report provides a process for implementation of a change management plan, evaluation of current outage processes, the selection of technology, and guidance for the implementation of the selected technology. Methods are presented for both adoption of technologies within an existing OCC and for a complete OCC replacement, including human factors considerations for OCC design and setup.« less

A Successful Infusion Process for Enabling Lunar Exploration Technologies

NASA Technical Reports Server (NTRS)

Over, Ann P.; Klem, Mark K.; Motil, Susan M.

2008-01-01

The NASA Vision for Space Exploration begins with a more reliable flight capability to the International Space Station and ends with sending humans to Mars. An important stepping stone on the path to Mars encompasses human missions to the Moon. There is little doubt throughout the stakeholder community that new technologies will be required to enable this Vision. However, there are many factors that influence the ability to successfully infuse any technology including the technical risk, requirement and development schedule maturity, and, funds available. This paper focuses on effective infusion processes that have been used recently for the technologies in development for the lunar exploration flight program, Constellation. Recent successes with Constellation customers are highlighted for the Exploration Technology Development Program (ETDP) Projects managed by NASA Glenn Research Center (GRC). Following an overview of the technical context of both the flight program and the technology capability mapping, the process is described for how to effectively build an integrated technology infusion plan. The process starts with a sound risk development plan and is completed with an integrated project plan, including content, schedule and cost. In reality, the available resources for this development are going to change over time, necessitating some level of iteration in the planning. However, the driving process is based on the initial risk assessment, which changes only when the overall architecture changes, enabling some level of stability in the process.

Decontamination Systems Information and Research Program. Quarterly technical progress report, January 1--March 31, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-05-01

West Virginia University (WVU) and the US DOE Morgantown Energy Technology Center (METC) entered into a Cooperative Agreement on August 29, 1992 entitled ``Decontamination Systems Information and Research Programs.`` Stipulated within the Agreement is the requirement that WVU submit to METC a series of Technical Progress Reports on a quarterly basis. This report comprises the first Quarterly Technical Progress Report for Year 2 of the Agreement. This report reflects the progress and/or efforts performed on the sixteen (16) technical projects encompassed by the Year 2 Agreement for the period of January 1 through March 31, 1994. In situ bioremediation ofmore » chlorinated organic solvents; Microbial enrichment for enhancing in-situ biodegradation of hazardous organic wastes; Treatment of volatile organic compounds (VOCs) using biofilters; Drain-enhanced soil flushing (DESF) for organic contaminants removal; Chemical destruction of chlorinated organic compounds; Remediation of hazardous sites with steam reforming; Soil decontamination with a packed flotation column; Use of granular activated carbon columns for the simultaneous removal of organics, heavy metals, and radionuclides; Monolayer and multilayer self-assembled polyion films for gas-phase chemical sensors; Compact mercuric iodide detector technology development; Evaluation of IR and mass spectrometric techniques for on-site monitoring of volatile organic compounds; A systematic database of the state of hazardous waste clean-up technologies; Dust control methods for insitu nuclear and hazardous waste handling; Winfield Lock and Dam remediation; and Socio-economic assessment of alternative environmental restoration technologies.« less

Bringing Together Mentoring, Technology, and Whole-School Reform: A First Look at the iMentor College Ready Program. Technical Appendices

ERIC Educational Resources Information Center

Merrill, Lisa; Siman, Nina; Wulach, Suzanne; Kang, David

2015-01-01

iMentor's College Ready Program is a unique approach that combines elements of school-based mentoring, whole school reform, and technology in an effort to help students develop the full suite of knowledge, behaviors, and skills they need to complete high school and enroll and thrive in college. iMentor partners with high schools that serve…

Sediment Management Methods to Reduce Dredging: Part 2, Sediment Collector Technology

DTIC Science & Technology

2017-04-01

Approved for public release; distribution is unlimited. ERDC TN-DOER-T13 April 2017 Sediment Management Methods to Reduce Dredging: Part 2...DOER) Program technical note (TN) is the second in a series evaluating sediment management methods to reduce dredging through a research task (RT...in the DOER Program.1 This TN presents an evaluation of sediment collector technology, one promising new device that may help better manage

United States Air Force Summer Faculty Research Program (1987). Program Technical Report. Volume 1.

DTIC Science & Technology

1987-12-01

Mechanical Engineering Specialty: Engineering Science Rose-Hulman Institute Assigned: APL 5500 Wabash Avenue - Terre Haute, IN 47803 (812) 877-1511 Dr...Professor/Di rector 1973 Dept. of Humanities Specialty: Literature/Language Rose-Hulman Inst. of Technology Assigned: HRL/LR 5500 Wabash Avenue - Terre...1976 Assistant Professor Specialty: Computer Science Dept. of Computer Science Assigned: AL Rose-Hulman Inst. of Technology 5500 Wabash Ave. Terre Haute

2008 annual merit review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2009-01-18

The 2008 DOE Vehicle Technologies Program Annual Merit Review was held February 25-28, 2008 in Bethesda, Maryland. The review encompassed all of the work done by the Vehicle Technologies Program: a total of 280 individual activities were reviewed, by a total of just over 100 reviewers. A total of 1,908 individual review responses were received for the technical reviews, and an additional 29 individual review responses were received for the plenary session review.

Atomic Power in Space: A History

DOE R&D Accomplishments Database

1987-03-01

"Atomic Power in Space," a history of the Space Isotope Power Program of the United States, covers the period from the program's inception in the mid-1950s through 1982. Written in non-technical language, the history is addressed to both the general public and those more specialized in nuclear and space technologies. Interplanetary space exploration successes and achievements have been made possible by this technology, for which there is no known substitue.

15 CFR 290.6 - Proposal evaluation and selection criteria.

Code of Federal Regulations, 2012 CFR

2012-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL.... (a) In making a decision whether to provide financial support, NIST shall review and evaluate all... NIST research results and expertise in the technical areas noted in these procedures? (3) Technology...

15 CFR 290.6 - Proposal evaluation and selection criteria.

Code of Federal Regulations, 2013 CFR

2013-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL.... (a) In making a decision whether to provide financial support, NIST shall review and evaluate all... NIST research results and expertise in the technical areas noted in these procedures? (3) Technology...

15 CFR 290.6 - Proposal evaluation and selection criteria.

Code of Federal Regulations, 2014 CFR

2014-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL.... (a) In making a decision whether to provide financial support, NIST shall review and evaluate all... NIST research results and expertise in the technical areas noted in these procedures? (3) Technology...

Review of NASA In-Space Propulsion Technology Program Inflatable Decelerator Investments

NASA Technical Reports Server (NTRS)

Richardson, E. H.; Mnk, M. M.; James, B. F.; Moon, S. A.

2005-01-01

The NASA In-Space Propulsion Technology (ISPT) Program is managed by the NASA Headquarters Science Mission Directorate and is implemented by the Marshall Space Flight Center in Huntsville, Alabama. The ISPT objective is to fund development of promising in-space propulsion technologies that can decrease flight times, decrease cost, or increase delivered payload mass for future science missions. Before ISPT will invest in a technology, the Technology Readiness Level (TRL) of the concept must be estimated to be at TRL 3. A TRL 3 signifies that the technical community agrees that the feasibility of the concept has been proven through experiment or analysis. One of the highest priority technology investments for ISPT is Aerocapture. The aerocapture maneuver uses a planetary atmosphere to reduce or alter the speed of a vehicle allowing for quick, propellantless (or using very little propellant) orbit capture. The atmosphere is used as a brake, transferring the energy associated with the vehicle's high speed into thermal energy. The ISPT Aerocapture Technology Area (ATA) is currently investing in the development of advanced lightweight ablative thermal protection systems, high temperature composite structures, and heat-flux sensors for rigid aeroshells. The heritage of rigid aeroshells extends back to the Apollo era and this technology will most likely be used by the first generation aerocapture vehicle. As a second generation aerocapture technology, ISPT is investing in three inflatable aerodynamic decelerator concepts for planetary aerocapture. They are: trailing ballute (balloon-parachute), attached afterbody ballute, and an inflatable aeroshell. ISPT also leverages the NASA Small Business Innovative Research Program for additional inflatable decelerator technology development. In mid-2004 ISPT requested an independent review of the three inflatable decelerator technologies funded directly by ISPT to validate the TRL and to identify technology maturation concerns. An independent panel with expertise in advanced thin film materials, aerothermodynamics, trajectory design, and inflatable structures was convened to assess the ISPT investments. The panel considered all major technical subsystems including materials, aerothermodynamics, structural dynamics, packaging, and inflation systems. The panel assessed the overall technology readiness of inflatable decelerators to be a 3 and identified fluid- structure interaction, aeroheating, and structural adhesives to be of highest technical concern.

Review of NASA In-Space Propulsion Technology Program Inflatable Decelerator Investments

NASA Technical Reports Server (NTRS)

Richardson, Erin H.; Munk, Michelle M.; James, Bonnie F.; Moon, Steve A.

2005-01-01

The NASA In-Space Propulsion Technology (ISPT) Program is managed by the NASA Headquarters Science Mission Directorate and is implemented by the Marshall Space Flight Center in Huntsville, Alabama. The ISPT objective is to fund development of promising in- space propulsion technologies that can decrease flight times, decrease cost, or increase delivered payload mass for future science missions. Before ISPT will invest in a technology, the Technology Readiness Level (TRL) of the concept must be estimated to be at TRL 3. A TRL 3 signifies that the technical community agrees that the feasibility of the concept has been proven through experiment or analysis. One of the highest priority technology investments for ISPT is Aerocapture. The aerocapture maneuver uses a planetary atmosphere to reduce or alter the speed of a vehicle allowing for quick, propellantless (or using very little propellant) orbit capture. The atmosphere is used as a brake, transferring the energy associated with the vehicle s high speed into thermal energy. The ISPT Aerocapture Technology Area (ATA) is currently investing in the development of advanced lightweight ablative thermal protection systems, high temperature composite structures, and heat-flux sensors for rigid aeroshells. The heritage of rigid aeroshells extends back to the Apollo era and this technology will most likely be used by the first generation aerocapture vehicle. As a second generation aerocapture technology, ISPT is investing in three inflatable aerodynamic decelerator concepts for planetary aerocapture. They are: trailing ballute (balloon-parachute), attached afterbody ballute, and an inflatable aeroshell. ISPT also leverages the NASA Small Business Innovative Research Program for additional inflatable decelerator technology development. In mid-2004 ISPT requested an independent review of the three inflatable decelerator technologies funded directly by ISPT to validate the TRL and to identify technology maturation concerns. An independent panel with expertise in advanced thin film materials, aerothermodynamics, trajectory design, and inflatable structures was convened to assess the ISPT investments. The panel considered all major technical subsystems including materials, aerothermodynamics, structural dynamics, packaging, and inflation systems. The panel assessed the overall technology readiness of inflatable decelerators to be a 3 and identified fluid-structure interaction, aeroheating, and structural adhesives to be of highest technical concern.

77 FR 14955 - DoD Information Assurance Scholarship Program (IASP)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

... IA and information technology (IT) management, technical, digital and multimedia forensics, cyber..., digital and multimedia forensics, electrical engineering, electronics engineering, information security...

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

NASA Technical Reports Server (NTRS)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Workshop on Advanced Technologies for Planetary Instruments, part 1

NASA Technical Reports Server (NTRS)

Appleby, John F. (Editor)

1993-01-01

This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. This volume contains papers presented at the Workshop on Advanced Technologies for Planetary Instruments on 28-30 Apr. 1993. This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. Over the past several years, SDIO has sponsored a significant technology development program aimed, in part, at the production of instruments with these characteristics. This workshop provided an opportunity for specialists from the planetary science and DoD communities to establish contacts, to explore common technical ground in an open forum, and more specifically, to discuss the applicability of SDIO's technology base to planetary science instruments.

Research and technology at Kennedy Space Center

NASA Technical Reports Server (NTRS)

1989-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing increasing emphasis on the Center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of current mission, the technical tools are developed needed to execute Center's mission relative to future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1989 Annual Report.

Research and technology 1991 annual report

NASA Technical Reports Server (NTRS)

1991-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, NASA Kennedy is placing increasing emphasis on the center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of the current mission, the technical tools are being developed which are needed to execute the center's mission relative to future programs. The Engineering Development Directorate encompasses most of the labs and other center resources that are key elements of research and technology program implementation and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1991 annual report.

Automotive Stirling engine development program: A success

NASA Technical Reports Server (NTRS)

Tabata, W. K.

1987-01-01

The original 5-yr Automotive Stirling Engine Development Program has been extended to 10 years due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

Automotive Stirling engine development program - A success

NASA Technical Reports Server (NTRS)

Tabata, William K.

1987-01-01

The original 5-year Automotive Stirling Engine Development Program has been extended to 10 years due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

PROGRAMMED INSTRUCTION AND THE HOSPITAL, A REPORT ON THE USE OF PROGRAMMED INSTRUCTION IN HEALTH CARE INSTITUTIONS.

ERIC Educational Resources Information Center

Hospital Research and Educational Trust, Chicago, IL.

THE FIRST SECTION OF THIS REPORT ON PROGRAMED INSTRUCTION IN THE HEALTH CARE FIELD EXAMINES THE HOSPITAL MILIEU AND SUCH PROBLEMS AS PERSONNEL SHORTAGES, INCREASING SPECIALIZATION, AND STRICT TECHNICAL AND EDUCATIONAL REQUIREMENTS. THE SECOND SECTION REVIEWS SOME RECENT ADVANCES IN BEHAVIORAL TECHNOLOGY, FUNDAMENTAL PRINCIPLES OF TEACHING…

Development and Deployment of the Purdue TAP Green Enterprise Development Program

ERIC Educational Resources Information Center

Rogers, Ethan A.

2013-01-01

Purdue University--Mechanical, Engineering, and Technology (MET) faculty and Purdue Technical Assistance Program (TAP) staff partnered with the Society of Manufacturing Engineers (SME) to create a new workforce training program and certificate exam in the field of green manufacturing. This article describes how the body of knowledge for the…

A Curriculum Guide for Industrial Arts Plastic Technology. Intermediate and Secondary Level Students.

ERIC Educational Resources Information Center

Landers, Jack M.

This curriculum guide is an aid to administrators and instructors of industrial arts and vocational-technical school programs for the development of meaningful curriculum in plastics. The materials are intended for use at four levels: level I, exploring plastic technology; Level II, basic plastic technology; and levels III and IV, applied plastic…

Advanced Transportation System Studies. Technical Area 3: Alternate Propulsion Subsystems Concepts. Volume 3; Program Cost Estimates

NASA Technical Reports Server (NTRS)

Levack, Daniel J. H.

2000-01-01

The objective of this contract was to provide definition of alternate propulsion systems for both earth-to-orbit (ETO) and in-space vehicles (upper stages and space transfer vehicles). For such propulsion systems, technical data to describe performance, weight, dimensions, etc. was provided along with programmatic information such as cost, schedule, needed facilities, etc. Advanced technology and advanced development needs were determined and provided. This volume separately presents the various program cost estimates that were generated under three tasks: the F- IA Restart Task, the J-2S Restart Task, and the SSME Upper Stage Use Task. The conclusions, technical results , and the program cost estimates are described in more detail in Volume I - Executive Summary and in individual Final Task Reports.

Creating the Future: Research and Technology

NASA Technical Reports Server (NTRS)

1998-01-01

With the many different technical talents, Marshall Space Flight Center (MSFC) continues to be an important force behind many scientific breakthroughs. The MSFC's annual report reviews the technology developments, research in space and microgravity sciences, studies in space system concepts, and technology transfer. The technology development programs include development in: (1) space propulsion and fluid management, (2) structures and dynamics, (3) materials and processes and (4) avionics and optics.

A Research Program in Computer Technology. 1982 Annual Technical Report

DTIC Science & Technology

1983-03-01

for the Defense Advanced Research Projects Agency. The research applies computer science and technology to areas of high DoD/ military impact. The ISI...implement the plan; New Computing Environment - investigation and adaptation of developing computer technologies to serve the research and military ...Computing Environment - ,.*_i;.;"’.)n and adaptation of developing computer technologies to serve the research and military tser communities; and Computer

Mobile satellite communications technology - A summary of NASA activities

NASA Technical Reports Server (NTRS)

Dutzi, E. J.; Knouse, G. H.

1986-01-01

Studies in recent years indicate that future high-capacity mobile satellite systems are viable only if certain high-risk enabling technologies are developed. Accordingly, NASA has structured an advanced technology development program aimed at efficient utilization of orbit, spectrum, and power. Over the last two years, studies have concentrated on developing concepts and identifying cost drivers and other issues associated with the major technical areas of emphasis: vehicle antennas, speech compression, bandwidth-efficient digital modems, network architecture, mobile satellite channel characterization, and selected space segment technology. The program is now entering the next phase - breadboarding, development, and field experimentation.

Math 3320--Technical Mathematics II.

ERIC Educational Resources Information Center

New York Inst. of Tech., Old Westbury.

This document contains the course syllabus and 12 independent practice modules for a college pre-calculus course designed as the second course in a two-semester sequence for students in a Bachelor of Technology program. The course emphasizes applications from technology and verbal problems. Topics include trigonometric functions; identities;…

Racial/Ethnic and Gender Equity Patterns in Illinois High School Career and Technical Education Coursework

ERIC Educational Resources Information Center

Hamilton, Asia Fuller; Malin, Joel; Hackmann, Donald

2015-01-01

This study analyzed high school Career and Technical Education (CTE) enrollments in Illinois, with comparisons to national data when possible, by career cluster and pathway and with respect to gender and racial/ethnic makeup of students. Enrollment patterns in Science, Technology, Engineering, and Math (STEM) CTE programming were emphasized.…

Exploring Strengths of Career Technical Education Deans: Implementing Change within Community Colleges

ERIC Educational Resources Information Center

Davis, Maria

2013-01-01

The purpose of this qualitative study was to explore how career technical education (CTE) deans implement crucial changes in their programs to keep up with industry standards required by external agencies, the Perkins grant, and the advancements of technology. Deans must make top-down, lateral, as well as vertical change to implement improvements…

Rigor "and" Relevance: Enhancing High School Students' Math Skills through Career and Technical Education

ERIC Educational Resources Information Center

Stone, James R., III; Alfeld, Corinne; Pearson, Donna

2008-01-01

Numerous high school students, including many who are enrolled in career and technical education (CTE) courses, do not have the math skills necessary for today's high-skill workplace or college entrance requirements. This study tests a model for enhancing mathematics instruction in five high school CTE programs (agriculture, auto technology,…

MDRC's Career and Technical Education Projects. Issue Focus

ERIC Educational Resources Information Center

MDRC, 2017

2017-01-01

The past decade has seen a resurgence of interest in career and technical education (CTE) as a way to engage students, help people build the skills necessary to succeed in a technologically advanced economy, and meet employer demand for workers. MDRC--which has a two-decade history of developing and evaluating CTE programs, including their…

75 FR 70966 - Transit Asset Management (TAM) Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-19

... interoperability between diverse types of information technology systems through use of open data formats and... to develop asset management plans, technical assistance, data collection and a pilot program as... condition assessment methodologies, as well as new data collection and analysis activities. $3 million has...

1st NASA Electronic Parts Packaging (NEPP) Program Electronic Technology Workshop (ETW)

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Sampson, Michael J.

2010-01-01

NEPP supports all of NASA for >20 years - 7 NASA Centers and JPL actively participate The NEPP Program focuses on the reliability aspects of electronic devices - Three prime technical areas: Parts (die), Packaging, and Radiation Alternately, reliability may be viewed as: -

Robotic acquisition programs: technical and performance challenges

NASA Astrophysics Data System (ADS)

Thibadoux, Steven A.

2002-07-01

The Unmanned Ground Vehicles/ Systems Joint Project Office (UGV/S JPO) is developing and fielding a variety of tactical robotic systems for the Army and Marine Corps. The Standardized Robotic System (SRS) provides a family of common components that can be installed in existing military vehicles, to allow unmanned operation of the vehicle and its payloads. The Robotic Combat Support System (RCSS) will be a medium sized unmanned system with interchangeable attachments, allowing a remote operator to perform a variety of engineering tasks. The Gladiator Program is a USMC initiative for a small to medium sized, highly mobile UGV to conduct scout/ surveillance missions and to carry various lethal and non-lethal payloads. Acquisition plans for these programs require preplanned evolutionary block upgrades to add operational capability, as new technology becomes available. This paper discusses technical and performance issues that must be resolved and the enabling technologies needed for near term block upgrades of these first generation robotic systems. Additionally, two Joint Robotics Program (JRP) initiatives, Robotic Acquisition through Virtual Environments and Networked Simulations (RAVENS) and Joint Architecture for Unmanned Ground Systems (JAUGS), will be discussed. RAVENS and JAUGS will be used to efficiently evaluate and integrate new technologies to be incorporated in system upgrades.

Space education: Deriving benefits from industrial consortia

NASA Technical Reports Server (NTRS)

Stone, Barbara A.; Page, John R.

1993-01-01

As the number of spacefaring nations of the world increases, so does the difficulty of competing in a global economy. The development of high technology products and services for space programs, and the economic exploitation of these technologies for national economic growth, requires professionals versed in both technical and commercial aspects of space. Meeting this requirement academically presents two challenges. On the technical side, enrollment in science and engineering is decreasing in some of the spacefaring nations. From the commerce perspective, very few colleges and universities offer specific courses in space business.

The Two-Year Colleges' Role in Building the Future Geoscience Technical Workforce

NASA Astrophysics Data System (ADS)

Wolfe, B.

2014-12-01

Careers in energy science related fields represent significant job growth in the U.S. Yet post-secondary career and technical programs have not kept pace with demand and energy science curriculum, including fundamental concepts of energy generation and environmental impact, lacks a firm position among general or career and technical education courses. Many of these emerging energy related jobs are skilled labor and entry level technical positions requiring less than a bachelor's degree. These include jobs such as solar/photovoltaic design and installation, solar water and space heating installation, energy management, efficiency and conservation auditor, environmental technician, etc. These energy related career pathways fit naturally within the geosciences discipline. Many of these jobs can be filled by individuals from HVAC, Industrial technology, welding, and electrical degree programs needing some additional specialized training and curriculum focused on fundamental concepts of energy, fossil fuel exploration and use, atmospheric pollution, energy generation, alternative energy sources, and energy conservation. Two-year colleges (2ycs) are uniquely positioned to train and fill these workforce needs as they already have existing career and technical programs and attract both recent high school graduates, as well as non-traditional students including displaced workers and returning veterans. We have established geoscience related workforce certificate programs that individuals completing the traditional industrial career and technical degrees can obtain to meet these emerging workforce needs. This presentation will discuss the role of geosciences programs at 2ycs in training these new workers, developing curriculum, and building a career/technical program that is on the forefront of this evolving industry.

Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olszewski, M.

The U.S. Department of Energy (DOE) and the U.S. Council for Automotive Research (composed of automakers Ford, General Motors, and DaimlerChrysler) announced in January 2002 a new cooperative research effort. Known as FreedomCAR (derived from 'Freedom' and 'Cooperative Automotive Research'), it represents DOE's commitment to developing public/private partnerships to fund high-risk, high-payoff research into advanced automotive technologies. Efficient fuel cell technology, which uses hydrogen to power automobiles without air pollution, is a very promising pathway to achieve the ultimate vision. The new partnership replaces and builds upon the Partnership for a New Generation of Vehicles initiative that ran from 1993more » through 2001. The Vehicle Systems subprogram within the FreedomCAR and Vehicle Technologies Program provides support and guidance for many cutting-edge automotive and heavy truck technologies now under development. Research is focused on understanding and improving the way the various new components of tomorrow's automobiles and heavy trucks will function as a unified system to improve fuel efficiency. This work also supports the development of advanced automotive accessories and the reduction of parasitic losses (e.g., aerodynamic drag, thermal management, friction and wear, and rolling resistance). In supporting the development of hybrid propulsion systems, the Vehicle Systems subprogram has enabled the development of technologies that will significantly improve fuel economy, comply with projected emissions and safety regulations, and use fuels produced domestically. The Vehicle Systems subprogram supports the efforts of the FreedomCAR and Fuel Partnership and the 21st Century Truck Partnership through a three-phase approach intended to: (1) Identify overall propulsion and vehicle-related needs by analyzing programmatic goals and reviewing industry's recommendations and requirements and then develop the appropriate technical targets for systems, subsystems, and component research and development activities; (2) Develop and validate individual subsystems and components, including electric motors, emission control devices, battery systems, power electronics, accessories, and devices to reduce parasitic losses; and (3) Determine how well the components and subsystems work together in a vehicle environment or as a complete propulsion system and whether the efficiency and performance targets at the vehicle level have been achieved. The research performed under the Vehicle Systems subprogram will help remove technical and cost barriers to enable the development of technology for use in such advanced vehicles as hybrid and fuel-cell-powered automobiles that meet the goals of the FreedomCAR Program. A key element in making hybrid electric vehicles practical is providing an affordable electric traction drive system. This will require attaining weight, volume, and cost targets for the power electronics and electrical machines subsystems of the traction drive system. Areas of development include these: (1) Novel traction motor designs that result in increased power density and lower cost; (2) Inverter technologies involving new topologies to achieve higher efficiency and the ability to accommodate higher-temperature environments; (3) Converter concepts that employ means of reducing the component count and integrating functionality to decrease size, weight, and cost; (4) More effective thermal control and packaging technologies; and (5) Integrated motor/inverter concepts. The Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center conducts fundamental research, evaluates hardware, and assists in the technical direction of the DOE Office of FreedomCAR and Vehicle Technologies Program, Power Electronics and Electric Machinery Program. In this role, ORNL serves on the FreedomCAR Electrical and Electronics Technical Team, evaluates proposals for DOE, and lends its technological expertise to the direction of projects and evaluation of developing technologies. ORNL also executes specific projects for DOE. The following report discusses those projects carried out in FY 2006 and conveys highlights of their accomplishments. Numerous project reviews, technical reports, and papers have been published for these efforts, if the reader is interested in pursuing details of the work. Summaries of major accomplishments for each technical project are give.« less

Risk-Informed Decision Making: Application to Technology Development Alternative Selection

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

2010-01-01

NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

The DOE photovoltaics program

NASA Technical Reports Server (NTRS)

Ferber, R. R.

1980-01-01

As part of the National Solar Energy program, the US Department of Energy is now engaged in the development of technically feasible, low cost candidate component and system technologies to the point where technical readiness can be demonstrated by 1982. The overall strategy is to pursue parallel options that continue to show promise of meeting the program goals, thus increasing the probability that at least one technology will be successful. Included in technology development are both flat plate solar collectors and concentrator solar collectors, as well as the balance of system components, such as structures, power conditioning, power controls, protection, and storage. Generally, these last items are common to both flat plate and concentrator systems, but otherwise there is considerable disparity in design philosophy, photovoltaic cell requirements, and possible applications between the two systems. Objectives for research activities at NASA Lewis for stand alone applications, and at Sandia Laboratories where intermediate load center applications are addressed, are highlighted as well as college projects directed by Oak Ridge National Laboratory, and international applications managed by the Solar Energy Research Institute. Joint DOD/DOE effects for military applications are also summarized.

NASA Information Sciences and Human Factors Program

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Hood, Ray; Montemerlo, Melvin; Jenkins, James; Smith, Paul; Dibattista, John; Depaula, Ramon; Hunter, Paul

1990-01-01

Fiscal year 1989 descriptions of technical accomplishments in seven sections are presented: automation and robotics; communications; computer sciences; controls and guidance; data systems; human factors; and sensor technology.

NASA information sciences and human factors program

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Hood, Ray; Montemerlo, Melvin; Jenkins, James; Smith, Paul; Dibattista, John; Depaula, Ramon; Hunter, Paul; Lavery, David

1991-01-01

The FY-90 descriptions of technical accomplishments are contained in seven sections: Automation and Robotics, Communications, Computer Sciences, Controls and Guidance, Data Systems, Human Factors, and Sensor Technology.

Technical area status report for waste destruction and stabilization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalton, J.D.; Harris, T.L.; DeWitt, L.M.

1993-08-01

The Office of Environmental Restoration and Waste Management (EM) was established by the Department of Energy (DOE) to direct and coordinate waste management and site remediation programs/activities throughout the DOE complex. In order to successfully achieve the goal of properly managing waste and the cleanup of the DOE sites, the EM was divided into five organizations: the Office of Planning and Resource Management (EM-10); the Office of Environmental Quality Assurance and Resource Management (EM-20); the Office of Waste Operations (EM-30); the Office of Environmental Restoration (EM-40); and the Office of Technology and Development (EM-50). The mission of the Office ofmore » Technology Development (OTD) is to develop treatment technologies for DOE`s operational and environmental restoration wastes where current treatment technologies are inadequate or not available. The Mixed Waste Integrated Program (MWIP) was created by OTD to assist in the development of treatment technologies for the DOE mixed low-level wastes (MLLW). The MWIP has established five Technical Support Groups (TSGs) whose purpose is to identify, evaluate, and develop treatment technologies within five general technical areas representing waste treatment functions from initial waste handling through generation of final waste forms. These TSGs are: (1) Front-End Waste Handling, (2) Physical/Chemical Treatment, (3) Waste Destruction and Stabilization, (4) Second-Stage Destruction and Offgas Treatment, and (5) Final Waste Forms. This report describes the functions of the Waste Destruction and Stabilization (WDS) group. Specifically, the following items are discussed: DOE waste stream identification; summary of previous efforts; summary of WDS treatment technologies; currently funded WDS activities; and recommendations for future activities.« less

The Outlook in Engineering-Related Technology Fields

ERIC Educational Resources Information Center

Weeks, Peggie

2009-01-01

Community colleges have a long and impressive history of preparing a well-qualified technical workforce to meet the immediate and short-term needs of local and regional industries. Programs range from certificates in areas such as drafting, computer-aided design, and automotive technology to associate degrees in electrical and mechanical…

Idaho National Laboratory LDRD Annual Report FY 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dena Tomchak

This report provides a glimpse into our diverse research and development portfolio, wwhich encompasses both advanced nuclear science and technology and underlying technologies. IN keeping with the mission, INL's LDRD program fosters technical capabilities necessary to support current and future DOE-Office of Nuclear Energy research and development needs.

Information Systems and Networks for Technology Transfer. Final Report.

ERIC Educational Resources Information Center

Page, John; Szentivanyi, Tibor

Results of a survey of the information resources available in industrialized countries which might be used in a United Nations technology transfer program for developing countries are presented. Information systems and networks, organized information collections of a scientific and technical character, and the machinery used to disseminate this…

Military display market segment: avionics (Invited Paper)

NASA Astrophysics Data System (ADS)

Desjardins, Daniel D.; Hopper, Darrel G.

2005-05-01

The military display market is analyzed in terms of one of its segments: avionics. Requirements are summarized for 13 technology-driving parameters for direct-view and virtual-view displays in cockpits and cabins. Technical specifications are discussed for selected programs. Avionics stresses available technology and usually requires custom display designs.

Meeting Stakeholder Energy Technology Education Needs Using a Mobile Demonstration

ERIC Educational Resources Information Center

de Koff, Jason P.; Ricketts, John C.; Robbins, Chris; Illukpitiya, Prabodh; Wade, Alvin

2017-01-01

Understanding the impact of workshops that include mobile demonstrations for describing technical applications can be useful when planning an Extension program on new energy technologies. We used a mobile demonstration in a workshop that provided information on small-scale on-farm biodiesel production. Evaluation of the workshop outcomes…

Trends in U.S. Engineering and Engineering Technology: A Comparative Study of Admissions, Curricula, and Employment.

ERIC Educational Resources Information Center

Lebold, W. K.; Lebold, D. J.

1985-01-01

Discusses the admissions selection practices, educational programs, quality standards, and employment characteristics of engineering and engineering technology in the United States. The importance of these two occupations as part of technical teams (which include scientists and technicians) is documented and stressed. (JN)

Building Academic Skills in Context: Testing the Value of Enhanced Math Learning in CTE

ERIC Educational Resources Information Center

Stone, James R., III; Alfeld, Corinne; Pearson, Donna; Lewis, Morgan V.; Jensen, Susan

2006-01-01

An experimental study tested a model for enhancing mathematics instruction in five high school career and technical education (CTE) programs (agriculture, auto technology, business/marketing, health, and information technology). The model consisted of a pedagogy and intense teacher professional development. Volunteer CTE teachers were randomly…

Math 3310--Technical Mathematics I. Course Outline.

ERIC Educational Resources Information Center

New York Inst. of Tech., Old Westbury.

This document contains the course syllabus and 12 independent practice modules for a college pre-calculus designed as the first course in a two-semester sequence for students in a Bachelor of Technology program. The course emphasizes engineering technology applications and verbal problems. Topics include a review of elementary algebra; factoring…

Precision Machining Technology. Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This curriculum guide was developed from a Technical Committee Report prepared with the assistance of industry personnel and containing a Task List which is the basis of the guide. It presents competency-based program standards for courses in precision machining technology and is part of the Idaho Vocational Curriculum Guide Project, a cooperative…

Welding Technology. Program CIP: 48.0508 - WELDING

ERIC Educational Resources Information Center

Ferguson, Doug

2010-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Project EFFECT. Energy for the Future: Education, Conservation, Training.

ERIC Educational Resources Information Center

Indiana Univ., South Bend. Center for Energy Conservation.

Project EFFECT (Energy for the Future: Education, Conservation, Training) was a three-year experimental program in curriculum development focusing on energy conservation, technology, and training. It had three objectives: (1) create a comprehensive training program for adults without previous technical training, applicable to community energy…

Technical Objective Document for Food and Food Service Systems

DTIC Science & Technology

1990-10-01

full ntission posture for exlended duration . 3. POCGRESS AND ACCa -fPLISHMENI’S Natick is responsible for many Research, Development, Test , and...Dr. David L. Kaplan Telephone (508) 651-5525 (Biotechnology) b. Technology Program (1) FY91 Planned Programs Complete Joint Services Front End

Planning a Successful Tech Show

ERIC Educational Resources Information Center

Nikirk, Martin

2011-01-01

Tech shows are a great way to introduce prospective students, parents, and local business and industry to a technology and engineering or career and technical education program. In addition to showcasing instructional programs, a tech show allows students to demonstrate their professionalism and skills, practice public presentations, and interact…

Engaging Faculty for Innovative STEM Bridge Programs

ERIC Educational Resources Information Center

Goldfien, Andrea C.; Badway, Norena Norton

2014-01-01

Bridge programs, in which underprepared students gain the academic and technical skills necessary for college level courses and entry-level employment, are a promising initiative for expanding access to, and success in, community college education. For career pathways related to science, technology, engineering, or mathematics (STEM), bridge…

Criteria for the Establishment and Maintenance of Two Year Post High School Wastewater Technology Training Programs. Volume I: Program Criteria.

ERIC Educational Resources Information Center

Clemson Univ., SC. Dept. of Environmental Systems Engineering.

This program guide, prepared by representatives from the Environmental Protection Agency, plant operations, vocational-technical schools, professional associations, and universities, is the first of a two-volume series and provides an overall statement of the criteria for the selection of institutions as training facilities for wastewater…

Research and Technology

NASA Technical Reports Server (NTRS)

1990-01-01

Johnson Space Center (JSC) accomplishments in new and advanced concepts during 1989 are highlighted. This year, reports are grouped in sections, Medical Science, Solar System Sciences, Space Transportation Technology, and Space Systems Technology. Summary sections describing the role of JSC in each program are followed by descriptions of significant tasks. Descriptions are suitable for external consumption, free of technical jargon, and illustrated to increase ease of comprehension.

System engineering techniques for establishing balanced design and performance guidelines for the advanced telerobotic testbed

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.; Matijevic, J. R.

1987-01-01

Novel system engineering techniques have been developed and applied to establishing structured design and performance objectives for the Telerobotics Testbed that reduce technical risk while still allowing the testbed to demonstrate an advancement in state-of-the-art robotic technologies. To estblish the appropriate tradeoff structure and balance of technology performance against technical risk, an analytical data base was developed which drew on: (1) automation/robot-technology availability projections, (2) typical or potential application mission task sets, (3) performance simulations, (4) project schedule constraints, and (5) project funding constraints. Design tradeoffs and configuration/performance iterations were conducted by comparing feasible technology/task set configurations against schedule/budget constraints as well as original program target technology objectives. The final system configuration, task set, and technology set reflected a balanced advancement in state-of-the-art robotic technologies, while meeting programmatic objectives and schedule/cost constraints.

Advanced technology for future regional transport aircraft

NASA Technical Reports Server (NTRS)

Williams, L. J.

1982-01-01

In connection with a request for a report coming from a U.S. Senate committee, NASA formed a Small Transport Aircraft Technology (STAT) team in 1978. STAT was to obtain information concerning the technical improvements in commuter aircraft that would likely increase their public acceptance. Another area of study was related to questions regarding the help which could be provided by NASA's aeronautical research and development program to commuter aircraft manufacturers with respect to the solution of technical problems. Attention is given to commuter airline growth, current commuter/region aircraft and new aircraft in development, prospects for advanced technology commuter/regional transports, and potential benefits of advanced technology. A list is provided of a number of particular advances appropriate to small transport aircraft, taking into account small gas turbine engine component technology, propeller technology, three-dimensional wing-design technology, airframe aerodynamics/propulsion integration, and composite structure materials.

STochastic Analysis of Technical Systems (STATS): A model for evaluating combined effects of multiple uncertainties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kranz, L.; VanKuiken, J.C.; Gillette, J.L.

1989-12-01

The STATS model, now modified to run on microcomputers, uses user- defined component uncertainties to calculate composite uncertainty distributions for systems or technologies. The program can be used to investigate uncertainties for a single technology on to compare two technologies. Although the term technology'' is used throughout the program screens, the program can accommodate very broad problem definitions. For example, electrical demand uncertainties, health risks associated with toxic material exposures, or traffic queuing delay times can be estimated. The terminology adopted in this version of STATS reflects the purpose of the earlier version, which was to aid in comparing advancedmore » electrical generating technologies. A comparison of two clean coal technologies in two power plants is given as a case study illustration. 7 refs., 35 figs., 7 tabs.« less

Giant step for communication satellite technology

NASA Technical Reports Server (NTRS)

Lovell, R. R.

1984-01-01

NASA's communications program, which is concerned with advanced communications technology, reflects the need for operational communications satellite capacity beyond the capabilities of current technology and the unwillingness of private industry in the U.S. to undertake making the required long-range, high-risk technology advances. It is pointed out that current satellites will not satisfy the forecasted demand for additional capacity in the 1990s and beyond. Current technology exists primarily up to 18 GHz. Designing a communications satellite at each of the three major uplink/downlink frequency bands (C, Ku, and Ka, 6/4 GHz, 14/11 GHz, and 30/20 GHz, respectively) presents different program management and technical problems. Increasing frequency or power can be done only by intensive sustained research. This is the rationale for NASA to pursue the Advanced Communications Technology Satellite (ACTS) program.

Program for transfer research and impact studies

NASA Technical Reports Server (NTRS)

Rusnak, J. J.; Freeman, J. E.; Hartley, J. M.; Kottenstette, J. P.; Staskin, E. R.

1973-01-01

Research activities conducted under the Program for Transfer Research and Impact Studies (TRIS) during 1972 included: (1) preparation of 10,196 TSP requests for TRIS application analysis; (2) interviews with over 500 individuals concerning the technical, economic, and social impacts of NASA-generated technology; (3) preparation of 38 new technology transfer example files and 101 new transfer cases; and (4) maintenance of a technology transfer library containing more than 2,900 titles. Six different modes of technology utilization are used to illustrate the pervasiveness of the transfer and diffusion of aerospace innovations. These modes also provide a basis for distinguishing the unique characteristics of the NASA Technology Utilization Program. An examination is reported of the ways in which NASA-generated technology is contributing to beneficial social change in five major areas of human concern: health, environment, safety, transportation, and communication.

Giant step for communication satellite technology

NASA Astrophysics Data System (ADS)

Lovell, R. R.

1984-03-01

NASA's communications program, which is concerned with advanced communications technology, reflects the need for operational communications satellite capacity beyond the capabilities of current technology and the unwillingness of private industry in the U.S. to undertake making the required long-range, high-risk technology advances. It is pointed out that current satellites will not satisfy the forecasted demand for additional capacity in the 1990s and beyond. Current technology exists primarily up to 18 GHz. Designing a communications satellite at each of the three major uplink/downlink frequency bands (C, Ku, and Ka, 6/4 GHz, 14/11 GHz, and 30/20 GHz, respectively) presents different program management and technical problems. Increasing frequency or power can be done only by intensive sustained research. This is the rationale for NASA to pursue the Advanced Communications Technology Satellite (ACTS) program.

Reusable launch vehicle development research

NASA Technical Reports Server (NTRS)

1995-01-01

NASA has generated a program approach for a SSTO reusable launch vehicle technology (RLV) development which includes a follow-on to the Ballistic Missile Defense Organization's (BMDO) successful DC-X program, the DC-XA (Advanced). Also, a separate sub-scale flight demonstrator, designated the X-33, will be built and flight tested along with numerous ground based technologies programs. For this to be a successful effort, a balance between technical, schedule, and budgetary risks must be attained. The adoption of BMDO's 'fast track' management practices will be a key element in the eventual success of NASA's effort.

Infrared astronomy

NASA Technical Reports Server (NTRS)

Gillett, Frederick; Houck, James; Bally, John; Becklin, Eric; Brown, Robert Hamilton; Draine, Bruce; Frogel, Jay; Gatley, Ian; Gehrz, Robert; Hildebrand, Roger

1991-01-01

The decade of 1990's presents an opportunity to address fundamental astrophysical issues through observations at IR wavelengths made possible by technological and scientific advances during the last decade. The major elements of recommended program are: the Space Infrared Telescope Facility (SIRTF), the Stratospheric Observatory For Infrared Astronomy (SOFIA) and the IR Optimized 8-m Telescope (IRO), a detector and instrumentation program, the SubMilliMeter Mission (SMMM), the 2 Microns All Sky Survey (2MASS), a sound infrastructure, and technology development programs. Also presented are: perspective, science opportunities, technical overview, project recommendations, future directions, and infrastructure.

NASA Information Sciences and Human Factors Program

NASA Technical Reports Server (NTRS)

Holcomb, Lee (Editor); Hood, Ray (Editor); Montemerlo, Melvin (Editor); Sokoloski, Martin M. (Editor); Jenkins, James P. (Editor); Smith, Paul H. (Editor); Dibattista, John D. (Editor)

1988-01-01

The FY 1987 descriptions of technical accomplishments are contained for seven areas: automation and robotics, communications systems, computer sciences, controls and guidance, data systems, human factors, and sensor technology.

NASA information sciences and human factors program

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Hood, Ray; Montemerlo, Melvin; Sokoloski, Martin; Jenkins, James; Smith, Paul; Dibattista, John

1989-01-01

The FY 1988 descriptions of technical accomplishments is presented in seven sections: Automation and Robotics, Communications Systems, Computer Sciences, Controls and Guidance, Data Systems, Human Factors, and Sensor Technology.

Light Learning.

ERIC Educational Resources Information Center

Cutshall, Sandy

2002-01-01

Describes a career and technical education program on photonics, the study, research, and development of equipment and concepts used in the transmission of information through light, including fiber optics and experimental laser technologies. (JOW)

An Overview of 2014 SBIR Phase I and Phase II Materials Structures for Extreme Environments

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.; Morris, Jessica R.

2015-01-01

NASA's Small Business Innovation Research (SBIR) program focuses on technological innovation by investing in development of innovative concepts and technologies to help NASA mission directorates address critical research needs for Agency programs. This report highlights nine of the innovative SBIR 2014 Phase I and Phase II projects that emphasize one of NASA Glenn Research Center's six core competencies-Materials and Structures for Extreme Environments. The technologies cover a wide spectrum of applications such as high temperature environmental barrier coating systems, deployable space structures, solid oxide fuel cells, and self-lubricating hard coatings for extreme temperatures. Each featured technology describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report provides an opportunity for NASA engineers, researchers, and program managers to learn how NASA SBIR technologies could help their programs and projects, and lead to collaborations and partnerships between the small SBIR companies and NASA that would benefit both.

Defense Advanced Research Projects Agency: Key Factors Drive Transition of Technologies, but Better Training and Data Dissemination Can Increase Success

DTIC Science & Technology

2015-11-01

more detail. Table 1: Overview of DARPA Programs Selected for GAO Case Study Analyses Program name Program description Advanced Wireless Networks ...Selected DARPA Programs Program name According to DARPA portfolio-level database According to GAO analysis Advanced Wireless Networks for the Soldier...with potential transition partners Achievement of clearly defined technical goals Successful transition Advanced Wireless Networks for Soldier

An Overview of 2014 SBIR Phase 1 and Phase 2 Communications Technology and Development

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.; Morris, Jessica R.

2015-01-01

NASA's Small Business Innovation Research (SBIR) program focuses on technological innovation by investing in development of innovative concepts and technologies to help NASA mission directorates address critical research needs for Agency programs. This report highlights eight of the innovative SBIR 2014 Phase I and Phase II projects that emphasize one of NASA Glenn Research Center's six core competencies-Communication Technology and Development. The technologies cover a wide spectrum of applications such as X-ray navigation, microsensor instrument for unmanned aerial vehicle airborne atmospheric measurements, 16-element graphene-based phased array antenna system, interferometric star tracker, ultralow power fast-response sensor, and integrated spacecraft navigation and communication. Each featured technology describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report provides an opportunity for NASA engineers, researchers, and program managers to learn how NASA SBIR technologies could help their programs and projects, and lead to collaborations and partnerships between the small SBIR companies and NASA that would benefit both.

Fossil energy waste management. Technology status report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bossart, S.J.; Newman, D.A.

1995-02-01

This report describes the current status and recent accomplishments of the Fossil Energy Waste Management (FE WM) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Waste Management Program is to identify and develop optimal strategies to manage solid by-products from advanced coal technologies for the purpose of ensuring the competitiveness of advanced coal technologies as a future energy source. The projects in the Fossil Energy Waste Management Program are divided into three types of activities: Waste Characterization, Disposal Technologies, and Utilization Technologies. This technology status report includesmore » a discussion on barriers to increased use of coal by-products. Also, the major technical and nontechnical challenges currently being addressed by the FE WM program are discussed. A bibliography of 96 citations and a list of project contacts is included if the reader is interested in obtaining additional information about the FE WM program.« less

An application of multiattribute decision analysis to the Space Station Freedom program. Case study: Automation and robotics technology evaluation

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Levin, Richard R.; Carpenter, Elisabeth J.

1990-01-01

The results are described of an application of multiattribute analysis to the evaluation of high leverage prototyping technologies in the automation and robotics (A and R) areas that might contribute to the Space Station (SS) Freedom baseline design. An implication is that high leverage prototyping is beneficial to the SS Freedom Program as a means for transferring technology from the advanced development program to the baseline program. The process also highlights the tradeoffs to be made between subsidizing high value, low risk technology development versus high value, high risk technology developments. Twenty one A and R Technology tasks spanning a diverse array of technical concepts were evaluated using multiattribute decision analysis. Because of large uncertainties associated with characterizing the technologies, the methodology was modified to incorporate uncertainty. Eight attributes affected the rankings: initial cost, operation cost, crew productivity, safety, resource requirements, growth potential, and spinoff potential. The four attributes of initial cost, operations cost, crew productivity, and safety affected the rankings the most.

Space station environmental control and life support systems test bed program - an overview

NASA Astrophysics Data System (ADS)

Behrend, Albert F.

As the National Aeronautics and Space Administration (NASA) begins to intensify activities for development of the Space Station, decisions must be made concerning the technical state of the art that will be baselined for the initial Space Station system. These decisions are important because significant potential exists for enhancing system performance and for reducing life-cycle costs. However, intelligent decisions cannot be made without an adequate assessment of new and ready technologies, i.e., technologies which are sufficiently mature to allow predevelopment demonstrations to prove their application feasibility and to quantify the risk associated with their development. Therefore, the NASA has implemented a technology development program which includes the establishment of generic test bed capabilities in which these new technologies and approaches can be tested at the prototype level. One major Space Station subsystem discipline in which this program has been implemented is the environmental control and life support system (ECLSS). Previous manned space programs such as Gemini, Apollo, and Space Shuttle have relied heavily on consumables to provide environmental control and life support services. However, with the advent of a long-duration Space Station, consumables must be reduced within technological limits to minimize Space Station resupply penalties and operational costs. The use of advanced environmental control and life support approaches involving regenerative processes offers the best solution for significant consumables reduction while also providing system evolutionary growth capability. Consequently, the demonstration of these "new technologies" as viable options for inclusion in the baseline that will be available to support a Space Station initial operational capability in the early 1990's becomes of paramount importance. The mechanism by which the maturity of these new regenerative life support technologies will be demonstrated is the Space Station ECLSS Test Bed Program. The Space Station ECLSS Test Bed Program, which is managed by the NASA, is designed to parallel and to provide continuing support to the Space Station Program. The prime objective of this multiphase test bed program is to provide viable, mature, and enhancing technical options in time for Space Station implementation. To accomplish this objective, NASA is actively continuing the development and testing of critical components and engineering preprototype subsystems for urine processing, washwater recovery, water quality monitoring, carbon dioxide removal and reduction, and oxygen generation. As part of the ECLSS Test Bed Program, these regenerative subsystems and critical components are tested in a development laboratory to characterize subsystem performance and to identify areas in which further technical development is required. Proven concepts are then selected for development into prototype subsystems in which flight issues such as packaging and maintenance are addressed. These subsystems then are to be assembled as an integrated system and installed in an integrated systems test bed facility for extensive unmanned and manned testing.

Space Research and Technology Program: Program and specific objectives, document approval

NASA Technical Reports Server (NTRS)

1982-01-01

A detailed view of the Space Research and Technology program work breakdown structure is provided down to the specific objective level. Goals or objectives at each of these levels are set forth. The specific objective narratives are structured into several parts. First, a short paragraph statement of the specific objective is given. This is followed by a list of subobjectives. A list of targets is then provided for those areas of the specific objective that are amenable to a quantitative description of technical accomplishment and schedule. Fluid and thermal physics, materials and structures, computer science and electronics, space energy conversion, multidisciplinary research, controls and human factors, chemical propulsion, spacecraft systems, transportation systems, platform systems, and spacecraft systems technology comprise the principal research programs.

KSC SBIR/STTR 2004 Program Year Report

NASA Technical Reports Server (NTRS)

2005-01-01

The Kennedy Space Center Level III SBIR/STTR management staff is under the Technology Transfer Office within the Spaceport Engineering and Technology Directorate. The SBIR and STTR programs provide an opportunity for small high technology companies and research institutions to participate in Government-sponsored research and development (R&D) programs in key technology areas. The SBIR program was established by Congress in 1982 to provide increased opportunities for small businesses to participate in R&D programs, increase employment, and improve U.S. competitiveness. The program's specific objectives are to stimulate U.S. technological innovation, use small businesses to meet Federal research and development needs, increase private sector commercialization of innovations, and foster and encourage participation by socially disadvantaged businesses. Legislation enacted in December 2000 reauthorized the program and strengthened emphasis on pursuing commercial applications of SBIR projects. An SBIR Phase I contract is the opportunity to establish the feasibility and technical merit of a proposed innovation. Selected competitively, the Phase I contract lasts for 6 months and is funded up to $70,000. SBIR Phase II contracts continue the most promising Phase I projects based on scientific! technical merit, expected value to NASA, company capability, and commercial potential. Phase II contracts are usually for a period of 24 months and may not exceed $600,000. NASA usually selects approximately 40 percent of Phase I projects to continue to the Phase II level. Phase III is the process of furthering the development of a product to make it commercially available. The STTR program awards contracts to small business concerns for cooperative R&D with a nonprofit research institution. Research institutions include nonprofit research organizations, Federal laboratories, or universities. The goal of the program established by Congress is to facilitate the transfer of technology developed by a research institution through the entrepreneurship of a small business. The STIR program is smaller in funding than the SBIR program. While the proposal is submitted by the small business concern, at least 30 percent of the funding and work must originate with the research institution. STTR Phase I projects receive up to $100K for a one-year effort, and a Phase II contract receives up to $600K for two years.

Proceedings of the NSSDC Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications

NASA Technical Reports Server (NTRS)

Blackwell, Kim; Blasso, Len (Editor); Lipscomb, Ann (Editor)

1991-01-01

The proceedings of the National Space Science Data Center Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications held July 23 through 25, 1991 at the NASA/Goddard Space Flight Center are presented. The program includes a keynote address, invited technical papers, and selected technical presentations to provide a broad forum for the discussion of a number of important issues in the field of mass storage systems. Topics include magnetic disk and tape technologies, optical disk and tape, software storage and file management systems, and experiences with the use of a large, distributed storage system. The technical presentations describe integrated mass storage systems that are expected to be available commercially. Also included is a series of presentations from Federal Government organizations and research institutions covering their mass storage requirements for the 1990's.

Diversifying the STEM Pipeline: Recommendations from the Model Replication Institutions Program

ERIC Educational Resources Information Center

Institute for Higher Education Policy, 2010

2010-01-01

Launched in 2006 to address issues of national competitiveness and equity in science, technology, engineering, and mathematics (STEM) fields, the National Science Foundation-funded Model Replication Institutions (MRI) program sought to improve the quality, availability, and diversity of STEM education. The project offered technical assistance to…

76 FR 31393 - Federal Acquisition Regulation; Federal Acquisition Circular 2005-52; Introduction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... 2010-017 Robinson. Ethics Programs. VI Technical Amendments... SUPPLEMENTARY INFORMATION: Summaries for... technology that is a commercial item. Item V--Oversight of Contractor Ethics Programs (FAR Case 2010-017... Code of Business Ethics and Conduct. Contracting officers may ask to see a contractor's code of ethics...

Data systems and computer science space data systems: Onboard memory and storage

NASA Technical Reports Server (NTRS)

Shull, Tom

1991-01-01

The topics are presented in viewgraph form and include the following: technical objectives; technology challenges; state-of-the-art assessment; mass storage comparison; SODR drive and system concepts; program description; vertical Bloch line (VBL) device concept; relationship to external programs; and backup charts for memory and storage.

The 1981 NASA ASEE Summer Faculty Fellowship Program, volume 1

NASA Technical Reports Server (NTRS)

Robertson, N. G.; Huang, C. J.

1981-01-01

A review of NASA research programs related to developing and improving space flight technology is presented. Technical report topics summarized include: space flight feeding; aerospace medicine; reusable spacecraft; satellite soil, vegetation, and climate studies; microwave landing systems; anthropometric studies; satellite antennas; and space shuttle fuel cells.

Implementing Computer Integrated Manufacturing Technician Program.

ERIC Educational Resources Information Center

Gibbons, Roger

A computer-integrated manufacturing (CIM) technician program was developed to provide training and technical assistance to meet the needs of business and industry in the face of the demands of high technology. The Computer and Automated Systems Association (CASA) of the Society of Manufacturing Engineers provided the incentive and guidelines…

Process Versus Product

ERIC Educational Resources Information Center

Remmo, Matthew J.

2005-01-01

This article asks the question: "What can you get when you combine 100 students from three career technical programs, six student-created concepts, three highly-motivated instructors, and two leaders in automotive technology?" The answer can be found in this author's description of a program at the Elkhart Area Career Center (EACC) in…

The Use of the Discrete Wavelet Transform to Perform High Level Data Compression for Applications in Telemedicine

NASA Technical Reports Server (NTRS)

Schomer, Donald F.

1997-01-01

The document includes an executive summary of the program activities; questions regarding tiling that have yet to be addressed; and the impact of the grants received which include MDACC Infrastructure development, support of technology transfer, and the technical accomplishments of the program.

Quality and productivity drive innovation and improvement at United Technologies Aerospace Operations, Inc.

NASA Technical Reports Server (NTRS)

Jamar, L. G.

1986-01-01

Quality and innovation are the hallmarks of the national space program. In programs that preceded the Shuttle Program the emphasis was on meeting the risks and technical challenges of space with safety, quality, reliability, and success. At United Technologies Aerospace Operations, Inc. (UTAO), the battle has developed along four primary fronts. These fronts include programs to motivate and reward people, development and construction of optimized processes and facilities, implementation of specifically tailored management systems, and the application of appropriate measurement and control systems. Each of these initiatives is described. However, to put this quality and productivity program in perspective, UTAO and its role in the Shuttle Program are described first.

NASA-UVA light aerospace alloy and structures technology program

NASA Technical Reports Server (NTRS)

Gangloff, Richard P.; Haviland, John K.; Herakovich, Carl T.; Pilkey, Walter D.; Pindera, Marek-Jerzy; Stoner, Glenn E.; Swanson, Robert E.; Thornton, Earl A.; Wawner, Franklin E., Jr.; Wert, John A.

1990-01-01

The objective of the Light Aerospace Alloy and Structures Technology Program is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys, composites, and associated thermal gradient structures. Individual technical objectives are established for each project. Efforts aim to produce basic understanding of material behavior, monolithic and composite alloys, processing methods, solid and mechanics analyses, measurement advances, and a pool of educated graduate students. Progress is reported for 11 areas of study.

Technical Leadership Development Program-Year 3

DTIC Science & Technology

2012-08-30

Develop an understanding of why achieving technology-based competitive advantage can be part of firm’s business strategy.  Review the Porter Model ...NUMBER H98230-08-D-0171 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) Gavito /Dr. Valentin 5d. PROJECT NUMBER RT 4-3 5e. TASK...NUMBER WHS TO009 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Stevens Institute of Technology 8. PERFORMING ORGANIZATION

Infusing PDA technology into nursing education.

PubMed

White, Ann; Allen, Patricia; Goodwin, Linda; Breckinridge, Daya; Dowell, Jeffery; Garvy, Ryan

2005-01-01

Use of the personal digital assistant (PDA) has been infused into the accelerated baccalaureate program at Duke University to help prepare nursing students for professional practice. The authors provide an overview of the use of PDAs in the classroom, laboratory, and clinical setting. Technical aspects of PDA infusion and steps to ensure regulatory compliance are explored. Benefits of PDA use by both faculty and students in the program and challenges met with the infusion of this technology are also described.

The NASA Scientific and Technical Information (STI) Program's Implementation of Open Archives Initiation (OAI) for Data Interoperability and Data Exchange

NASA Technical Reports Server (NTRS)

Rocker, JoAnne; Roncaglia, George J.; Heimerl, Lynn N.; Nelson, Michael L.

2002-01-01

Interoperability and data-exchange are critical for the survival of government information management programs. E-government initiatives are transforming the way the government interacts with the public. More information is to be made available through web-enabled technologies. Programs such as the NASA's Scientific and Technical Information (STI) Program Office are tasked to find more effective ways to disseminate information to the public. The NASA STI Program is an agency-wide program charged with gathering, organizing, storing, and disseminating NASA-produced information for research and public use. The program is investigating the use of a new protocol called the Open Archives Initiative (OAI) as a means to improve data interoperability and data collection. OAI promotes the use of the OAI harvesting protocol as a simple way for data sharing among repositories. In two separate initiatives, the STI Program is implementing OAI In collaboration with the Air Force, Department of Energy, and Old Dominion University, the NASA STI Program has funded research on implementing the OAI to exchange data between the three organizations. The second initiative is the deployment of OAI for the NASA technical report server (TRS) environment. The NASA TRS environment is comprised of distributed technical report servers with a centralized search interface. This paper focuses on the implementation of OAI to promote interoperability among diverse data repositories.

Review of NASA's Exploration Technology Development Program: An Interim Report. [ISBN 0-309-11944-8 (place in D020A)

NASA Technical Reports Server (NTRS)

2008-01-01

NASA requested that a committee under the auspices of the National Research Council's Aeronautics and Space Engineering Board carry out an assessment of NASA's Exploration Technology Development Program (ETDP). Organizationally, this program functions under the direction of NASA's Exploration Systems Mission Directorate and is charged with developing new technologies that will enable NASA to conduct future human and robotic exploration missions, while reducing mission risk and cost. The Committee to Review NASA's Exploration Technology Development Program has been tasked to examine how well the program is aligned with the stated objectives of the President's Vision for Space Exploration (VSE), to identify gaps in the program, and to assess the quality of the research. The full statement of task is given in Appendix A. The committee consists of 25 members and includes a cross section of senior executives, engineers, researchers, and other aerospace professionals drawn from industry, universities, and government agencies with expertise in virtually all the technical fields represented within the program.

Technology assessment of portable energy RDT and P, phase 1

NASA Technical Reports Server (NTRS)

Spraul, J. R. (Compiler)

1975-01-01

A technological assessment of portable energy research, development, technology, and production was undertaken to assess the technical, economic, environmental, and sociopolitical issues associated with portable energy options. Those courses of action are discussed which would impact aviation and air transportation research and technology. Technology assessment workshops were held to develop problem statements. The eighteen portable energy problem statements are discussed in detail along with each program's objective, approach, task description, and estimates of time and costs.

Building technological capability within satellite programs in developing countries

NASA Astrophysics Data System (ADS)

Wood, Danielle; Weigel, Annalisa

2011-12-01

This paper explores the process of building technological capability in government-led satellite programs within developing countries. The key message is that these satellite programs can learn useful lessons from literature in the international development community. These lessons are relevant to emerging satellite programs that leverage international partnerships in order to establish local capability to design, build and operate satellites. Countries with such programs include Algeria, Nigeria, Turkey, Malaysia and the United Arab Emirates. The paper first provides background knowledge about space activity in developing countries, and then explores the nuances of the lessons coming from the international development literature. Developing countries are concerned with satellite technology because satellites provide useful services in the areas of earth observation, communication, navigation and science. Most developing countries access satellite services through indirect means such as sharing data with foreign organizations. More countries, however, are seeking opportunities to develop satellite technology locally. There are objective, technically driven motivations for developing countries to invest in satellite technology, despite rich debate on this topic. The paper provides a framework to understand technical motivations for investment in satellite services, hardware, expertise and infrastructure in both short and long term. If a country decides to pursue such investments they face a common set of strategic decisions at the levels of their satellite program, their national context and their international relationships. Analysis of past projects shows that countries have chosen diverse strategies to address these strategic decisions and grow in technological capability. What is similar about the historical examples is that many countries choose to leverage international partnerships as part of their growth process. There are also historical examples from outside the space arena in which organizations have pursued technological capability. Scholars have analyzed these examples and developed insightful frameworks. The paper draws key concepts from this literature about the nature of development, technology, knowledge and organizational learning. These concepts are relevant to learning in new satellite programs, but the ideas must be applied cautiously because of the nature of satellite technology. The paper draws three major lessons from the international development literature regarding absorptive capacity, tacit knowledge and organizational learning; it synthesizes these lessons into a cohesive, original framework. The closing section proposes future work on a detailed study of technological learning in specific government satellite programs.

Advanced Exploration Systems Atmosphere Resource Recovery and Environmental Monitoring

NASA Technical Reports Server (NTRS)

Perry, J.; Abney, M.; Conrad, R.; Garber, A.; Howard, D.; Kayatin, M.; Knox, J.; Newton, R.; Parrish, K.; Roman, M.;

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burton, J. C.; Environmental Research

The Commodity Credit Corporation (CCC) of the U.S. Department of Agriculture (USDA) has entered into an interagency agreement with the U.S. Department of Energy (DOE) under which Argonne National Laboratory provides technical assistance for hazardous waste site characterization and remediation for the CCC/USDA. Carbon tetrachloride is the contaminant of primary concern at sites in Kansas where former CCC/USDA grain storage facilities were located. Argonne applies its QuickSite(reg sign) Expedited Site Characterization (ESC) approach to these former facilities. The QuickSite environmental site characterization methodology is Argonne's proprietary implementation of the ESC process (ASTM 1998). Argonne has used this approach at severalmore » former CCC/USDA facilities in Kansas, including Agenda, Agra, Everest, and Frankfort. The Argonne ESC approach revolves around a multidisciplinary, team-oriented approach to problem solving. The basic features and steps of the QuickSite methodology are as follows: (1) A team of scientists with diverse expertise and strong field experience is required to make the process work. The Argonne team is composed of geologists, geochemists, geophysicists, hydrogeologists, chemists, biologists, engineers, computer scientists, health and safety personnel, and regulatory staff, as well as technical support staff. Most of the staff scientists are at the Ph.D. level; each has on average, more than 15 years of experience. The technical team works together throughout the process. In other words, the team that plans the program also implements the program in the field and writes the reports. More experienced scientists do not remain in the office while individuals with lesser degrees or experience carry out the field work. (2) The technical team reviews, evaluates, and interprets existing data for the site and the contaminants there to determine which data sets are technically valid and can be used in initially designing the field program. A basic mistake sometimes made in the site characterization process is failure to use technically sound available data to form working hypotheses on hydrogeology, contaminant distribution, etc. for initial testing. (3) After assembling and interpreting existing data for the site, the entire technical team visits the site to identify as a group the site characteristics that might prohibit or enhance any particular technological approach. Logistic and community constraints are also identified at this point. (4) After the field visit, the team selects a suite of technologies appropriate to the problem and completes the design of the field program. No one technique works well at all sites, and a suite of techniques is necessary to delineate site features fully. In addition, multiple technologies are employed to increase confidence in conclusions about site features. Noninvasive and minimally invasive technologies are emphasized to minimize risk to the environment, the community, and the staff. In no case is the traditional approach of installing a massive number of monitoring wells followed. A dynamic work plan that outlines the program is produced for the sponsoring and regulatory agencies. The word ''dynamic'' is emphasized because the work plan is viewed as a guide, subject to modification, for the site characterization activity, rather than a document that is absolute and unchangeable. Therefore, the health and safety plan and the quality assurance/quality control plan must be broad and encompass all possible alterations to the plan. The cooperation of the regulating agency is essential in successful implementation of this process. The sponsoring and regulatory agencies are notified if significant changes to the site-specific work plan are necessary. (5) The entire team participates in the technical field program. Several technical activities are undertaken simultaneously. These may range from different surface geophysics investigations to vegetation sampling. Data from the various activities are reduced and interpreted each day by the technical staff. Various computer programs are used to visualize and integrate the data. However, people do the data interpretation and integration, not the computers, which are just one more tool at the site. At the end of the day, the staff members meet, review results, and modify the next day's program as necessary to optimize activities that are generating overlapping or confirming site details. Data are not arbitrarily discarded -- each finding must be explained and understood. Anomalous readings may be due to equipment malfunctions, laboratory error, or the inability of a technique to work in a given setting. The suite of selected technologies is adjusted in the field if necessary. (6) The end result of this process is the optimization of the field activity to produce a high-quality technical product that is cost and time effective.« less

FY2007 Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olszewski, Mitchell

The U.S. Department of Energy (DOE) and the U.S. Council for Automotive Research (composed of automakers Ford, General Motors, and Chrysler) announced in January 2002 a new cooperative research effort. Known as 'FreedomCAR' (derived from 'Freedom' and 'Cooperative Automotive Research'), it represents DOE's commitment to developing public/private partnerships to fund high-risk, high-payoff research into advanced automotive technologies. Efficient fuel cell technology, which uses hydrogen to power automobiles without air pollution, is a very promising pathway to achieving the ultimate vision. The new partnership replaces and builds upon the Partnership for a New Generation of Vehicles initiative that ran from 1993more » through 2001. The Advanced Power Electronics and Electric Machines (APEEM) subprogram within the FreedomCAR and Vehicle Technologies Program provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on understanding and improving the way the various new components of tomorrow's automobiles will function as a unified system to improve fuel efficiency. In supporting the development of hybrid propulsion systems, the APEEM effort has enabled the development of technologies that will significantly improve advanced vehicle efficiency, costs, and fuel economy. The APEEM subprogram supports the efforts of the FreedomCAR and Fuel Partnership through a three-phase approach intended to: (1) identify overall propulsion and vehicle-related needs by analyzing programmatic goals and reviewing industry's recommendations and requirements and then develop the appropriate technical targets for systems, subsystems, and component research and development activities; (2) develop and validate individual subsystems and components, including electric motors and power electronics; and (3) determine how well the components and subsystems work together in a vehicle environment or as a complete propulsion system and whether the efficiency and performance targets at the vehicle level have been achieved. The research performed under this subprogram will help remove technical and cost barriers to enable the development of technology for use in such advanced vehicles as hybrid and fuel-cell-powered automobiles that meet the goals of the FreedomCAR and Vehicle Technologies Program. A key element in making hybrid electric vehicles (HEVs) practical is providing an affordable electric traction drive system. This will require attaining weight, volume, and cost targets for the power electronics and electrical machines subsystems of the traction drive system. Areas of development include these: (1) novel traction motor designs that result in increased power density and lower cost; (2) inverter technologies involving new topologies to achieve higher efficiency and the ability to accommodate higher-temperature environments; (3) converter concepts that employ means of reducing the component count and integrating functionality to decrease size, weight, and cost; (4) more effective thermal control and packaging technologies; and (5) integrated motor/inverter concepts. The Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center conducts fundamental research, evaluates hardware, and assists in the technical direction of the DOE Office of FreedomCAR and Vehicle Technologies Program, APEEM subprogram. In this role, ORNL serves on the FreedomCAR Electrical and Electronics Technical Team, evaluates proposals for DOE, and lends its technological expertise to the direction of projects and evaluation of developing technologies. ORNL also executes specific projects for DOE. The following report discusses those projects carried out in FY 2007 and conveys highlights of their accomplishments. Numerous project reviews, technical reports, and papers have been published for these efforts, if the reader is interested in pursuing details of the work.« less

OAST space technology accomplishments FY 1991

NASA Technical Reports Server (NTRS)

1992-01-01

The program consists of a continuum of space research and technology activities ranging from initial research to the full scale test of prototype equipment in space. Activities include work that is performed by in-house staff at the NASA Centers, university researchers supported by NASA funded grants and contracts, and industrial aerospace organizations under contract to NASA. These diverse activities provide advances in technology breakthroughs that may revolutionalize a technical discipline or mission concept. The work is managed and coordinated by OAST through a process that integrates the best available talent and capability in NASA, industry, and universities into a National civil space research and technology program.

Lena Burkett | NREL

Science.gov Websites

technological and implementation barriers faced by the residential construction industry. Prior to working at provides technical research management for DOE's Building America Program. In this role, she works to

Future NTP Development Synergy Leveraged from Current J-2X Engine Development

NASA Astrophysics Data System (ADS)

Ballard, Richard O.

2008-01-01

This paper is a discussion of how the many long-lead development elements required for the realization of a future nuclear thermal propulsion (NTP) system can be effectively leveraged from the ongoing work being conducted on the J-2X engine program for the Constellation Program. Development studies conducted to date for NTP forward planning have identified a number of technical areas that will require advancement to acceptable technology readiness levels (TRLs) before they can be utilized in NTP system development. These include high-temperature, high-area ratio nozzle extension; long-life, low-NPSP turbomachinery; and low-boiloff propellant management, and a qualified nuclear fuel element. The current J-2X program is working many of these areas that can be leveraged to support NTP development in a highly compatible and synergistic fashion. In addition to supporting technical development, there are other programmatic issues being worked in the J-2X program that can be leveraged by a future NTP development program. These include compliance with recently-evolved space system requirements such as human-rating, fault tolerance and fracture control. These and other similar mandatory system requirements have been adopted by NASA and can result in a significant technical impact beyond elevation of the root technologies required by NTP. Finally, the exploitation of experience, methodologies, and procedures developed by the J-2X program in the areas of verification, qualification, certification, altitude simulation testing, and facility definition will be especially applicable to a future NTP system. The similarities in system mission (in-space propulsion) and operational environment (vacuum, zero-gee) between J-2X and NTP make this highly synergistic. Thus, it can be shown that the collective benefit of leveraging experience and technologies developed during the J-2X program can result in significant savings in development cost and schedule for NTP.

Future NTP Development Synergy Leveraged from Current J-2X Engine Development

NASA Technical Reports Server (NTRS)

Ballard, Richard O.

2008-01-01

This paper is a discussion of how the many long-lead development elements required for the realization of a future nuclear thermal propulsion (NTP) system can be effectively leveraged from the ongoing work being conducted on the J-2X engine program for the Constellation Program. Development studies conducted to date for NTP forward planning have identified a number of technical areas that will require advancement to acceptable technology readiness levels (TRLs) before they can be utilized in NTP system development. These include high-temperature, high-area ratio nozzle extension; long-life, low-NPSP. turbomachinery; and low-boiloff propellant management; and a qualified nuclear fuel element. The current J-2X program is working many of these areas that can be leveraged to support NTP development in a highly compatible and synergistic fashion. In addition to supporting technical development, there are other programmatic issues being worked in the J-2X program that can be leveraged by a future NTP development program. These include compliance with recently-evolved space system requirements such as human-rating, fault tolerance and fracture control. These and other similar mandatory system requirements have been adopted by NASA and can result in a significant technical impact beyond elevation of the root technologies required by NTP. Finally, the exploitation of experience, methodologies, and procedures developed by the J-2X program in the areas of verification, qualification, certification, altitude simulation testing, and facility definition will be especially applicable to a future NTP system. The similarities in system mission (in-space propulsion) and operational environment (vacuum, zero-gee) between J-2X and NTP make this highly synergistic. Thus, it can be $hown that the collective benefit of leveraging experience and technologies developed during the J-2X program can result in significant savings in development cost and schedule for NTP.

Improving NASA's technology transfer process through increased screening and evaluation in the information dissemination program

NASA Technical Reports Server (NTRS)

Laepple, H.

1979-01-01

The current status of NASA's technology transfer system can be improved if the technology transfer process is better understood. This understanding will only be gained if a detailed knowledge about factors generally influencing technology transfer is developed, and particularly those factors affecting technology transfer from government R and D agencies to industry. Secondary utilization of aerospace technology is made more difficult because it depends on a transfer process which crosses established organizational lines of authority and which is outside well understood patterns of technical applications. In the absence of a sound theory about technology transfer and because of the limited capability of government agencies to explore industry's needs, a team approach to screening and evaluation of NASA generated technologies is proposed which calls for NASA, and other organizations of the private and public sectors which influence the transfer of NASA generated technology, to participate in a screening and evaluation process to determine the commercial feasibility of a wide range of technical applications.

Chautauqua notebook: appropriate technology on radio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renz, B.

1981-01-01

Experiences in establishing and maintaining a regional call-in information-exchange radio show (Chautauqua) on energy conservation, appropriate technology, renewable energy sources, and self-reliance are discussed. Information is presented on: appropriate technology; the Chautauquaa concept; topics discussed; research performed; guests; interviewing tips; types of listeners; program features; where to find help; promotion and publicity; the technical and engineering aspects; the budget and funding; and station policies. (MCW)

Integrative Curriculum Planning in Technological and Vocational Education in Taiwan, Republic of China.

ERIC Educational Resources Information Center

Wu, Robert T. Y.

Taiwan is facing these three challenges: cultivating a world-class work force, preventing shortages of industry-related workers, and increasing industrial competitiveness. To meet them, technological and vocational education (TVE) needs to integrate the curricula among the technical arts programs in junior high schools, senior vocational high…

Development of Articulated Competency-Based Curriculum in Laser/Electro-Optics Technology. Final Report.

ERIC Educational Resources Information Center

Luzerne County Community Coll., Nanticoke, PA.

A project was conducted at the Community College of Luzerne County (Pennsylvania) to develop, in cooperation with area vocational-technical schools, the first year of a competency-based curriculum in laser/electro-optics technology. Existing programs were reviewed and private sector input was sought in developing the curriculum and identifying…

Technical Education in 2-Year Colleges. HES Survey Number 17.

ERIC Educational Resources Information Center

Burton, Lawrence; Celebuski, Carin A.

Based on a January 1993 survey of 347 two-year colleges nationwide, this report describes aspects of engineering technology and science technology education and training in the nation's two-year colleges. Following introductory materials, the first chapter estimates the number of colleges offering engineering and science programs, reviews types of…

TECHcitement: Advances in Technological Education, 2004

ERIC Educational Resources Information Center

American Association of Community Colleges (NJ1), 2004

2004-01-01

This edition of "TECHcitement" contains the following articles: (1) ATE Program Leads to Student Success; (2) Doing Whatever It Takes for Aquaculture; (3) The Bridge to Biotech; (4) Girls See What They Can Do With Technology at Camp; (5) Students Advancing Solutions to Business Problems; (6) CREATE Recreates Technical Education in California; (7)…

Student Success Programs at the Northern Alberta Institute of Technology.

ERIC Educational Resources Information Center

Soetaert, Elaine

The Master Student course was introduced at Northern Alberta Institute of Technology to improve student retention; provide individuals with skills to become successful students; and to graduate students with technical, critical thinking, and effective communication skills. The course provides a point of entry into the institution in the areas of…

Advancing Diagnostic Skills for Technology and Engineering Undergraduates: A Summary of the Validation Data

ERIC Educational Resources Information Center

Foster, W. Tad; Shahhosseini, A. Mehran; Maughan, George

2016-01-01

Facilitating student growth and development in diagnosing and solving technical problems remains a challenge for technology and engineering educators. With funding from the National Science Foundation, this team of researchers developed a self-guided, computer-based instructional program to experiment with conceptual mapping as a treatment to…

A Forest Products Technology Program for Washington Community Colleges. Final Report.

ERIC Educational Resources Information Center

Grotefend, Robert T.

This report describes a project to develop a forest product technology curriculum that prepares students at the technical level, junior management, to work in the manufacturing of wood and bark into lumber, plywood, particle board, laminates, and pulp chips. Chapter 1 describes project objectives and procedures followed. In chapter 2 the history…

Telescience Testbed Pilot Program

NASA Technical Reports Server (NTRS)

Gallagher, Maria L. (Editor); Leiner, Barry M. (Editor)

1988-01-01

The Telescience Testbed Pilot Program (TTPP) is intended to develop initial recommendations for requirements and design approaches for the information system of the Space Station era. Multiple scientific experiments are being performed, each exploring advanced technologies and technical approaches and each emulating some aspect of Space Station era science. The aggregate results of the program will serve to guide the development of future NASA information systems.

Customer Satisfaction Survey of Pacific Northwest National Laboratory's Technical Assistance Partners -- FY 2011

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conger, Robin L.; Spanner, Gary E.

2011-11-02

The businesses that have utilized PNNL's Technology Assistance Program were sent a survey to solicit feedback about the program and to determine what, if any, outcomes resulted from the assistance provided. As part of its small business outreach, Pacific Northwest National Laboratory (PNNL) offers technology assistance to businesses with fewer than 500 employees throughout the nation and to businesses of any size in the 2 counties that contain the Hanford site. Upon request, up to 40 staff-hours of a researcher's time can be provided to address technology issues at no charge to the requesting firm. During FY 2011, PNNL completedmore » assistance for 54 firms. Topics of the technology assistance covered a broad range, including environment, energy, industrial processes, medical, materials, computers and software, and sensors. In FY 2011, PNNL's Technology Assistance Program (TAP) was funded by PNNL Overheads. Over the past 16 years, the Technology Assistance Program has received total funding of nearly $2.8 million from several federal and private sources.« less

California Publicly-Owned Utilities (POUs) – LBNL ‘Beyond Widgets’ Project. Task: ambient lighting and occupancy-based plug load control. System Program Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Alastair; Mathew, Paul A.; Regnier, Cynthia

This program manual contains detailed technical information for implementing an incentive program for task-ambient lighting and occupancy-based plug load control. This manual was developed by Lawrence Berkeley National Laboratory, in collaboration with the California Publicly-Owned Utilities (CA POUs) as a partner in the ‘Beyond Widgets’ program funded by the U.S. Department of Energy Building Technologies Office. The primary audience for this manual is the program staff of the various CA POUs. It may also be used by other utility incentive programs to help develop similar programs. It is anticipated that the content of this manual be utilized by the CAmore » POU staff for developing related documents such as the Technical Resource Manual and other filings pertaining to the rollout of an energy systems-based rebate incentive program.« less

Analysis of Aviation Safety Reporting System Incident Data Associated With the Technical Challenges of the Vehicle Systems Safety Technology Project

NASA Technical Reports Server (NTRS)

Withrow, Colleen A.; Reveley, Mary S.

2014-01-01

This analysis was conducted to support the Vehicle Systems Safety Technology (VSST) Project of the Aviation Safety Program (AVsP) milestone VSST4.2.1.01, "Identification of VSST-Related Trends." In particular, this is a review of incident data from the NASA Aviation Safety Reporting System (ASRS). The following three VSST-related technical challenges (TCs) were the focus of the incidents searched in the ASRS database: (1) Vechicle health assurance, (2) Effective crew-system interactions and decisions in all conditions; and (3) Aircraft loss of control prevention, mitigation, and recovery.

Advanced Turbine Technology Applications Project (ATTAP)

NASA Technical Reports Server (NTRS)

1992-01-01

This report is the fourth in a series of Annual Technical Summary Reports for the Advanced Turbine Technology Applications Project (ATTAP). This report covers plans and progress on ceramics development for commercial automotive applications over the period 1 Jan. - 31 Dec. 1991. Project effort conducted under this contract is part of the DOE Gas Turbine Highway Vehicle System program. This program is directed to provide the U.S. automotive industry the high-risk, long-range technology necessary to produce gas turbine engines for automobiles with reduced fuel consumption, reduced environmental impact, and a decreased reliance on scarce materials and resources. The program is oriented toward developing the high-risk technology of ceramic structural component design and fabrication, such that industry can carry this technology forward to production in the 1990s. The ATTAP test bed engine, carried over from the previous AGT101 project, is being used for verification testing of the durability of next-generation ceramic components, and their suitability for service at Reference Powertrain Design conditions. This document reports the technical effort conducted by GAPD and the ATTAP subcontractors during the fourth year of the project. Topics covered include ceramic processing definition and refinement, design improvements to the ATTAP test bed engine and test rigs and the methodology development of ceramic impact and fracture mechanisms. Appendices include reports by ATTAP subcontractors in the development of silicon nitride and silicon carbide families of materials and processes.

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 6: IPAD system development and operation

NASA Technical Reports Server (NTRS)

Redhed, D. D.; Tripp, L. L.; Kawaguchi, A. S.; Miller, R. E., Jr.

1973-01-01

The strategy of the IPAD implementation plan presented, proposes a three phase development of the IPAD system and technical modules, and the transfer of this capability from the development environment to the aerospace vehicle design environment. The system and technical module capabilities for each phase of development are described. The system and technical module programming languages are recommended as well as the initial host computer system hardware and operating system. The cost of developing the IPAD technology is estimated. A schedule displaying the flowtime required for each development task is given. A PERT chart gives the developmental relationships of each of the tasks and an estimate of the operational cost of the IPAD system is offered.

Off-highway vehicle technology roadmap.

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2002-02-07

The off-highway sector is under increasing pressure to reduce operating costs (including fuel costs) and to reduce emissions. Recognizing this, the Society of Automotive Engineers and the U.S. Department of Energy (DOE) convened a workshop in April 2001 (ANL 2001) to (1) determine the interest of the off-highway sector (consisting of agriculture, construction, surface mining, inland marine) in crafting a shared vision of off-highway, heavy machines of the future and (2) identify critical research and development (R&D) needs for minimizing off-highway vehicle emissions while cost-effectively maintaining or enhancing system performance. The workshop also enabled government and industry participants to exchangemore » information. During the workshop, it became clear that the challenges facing the heavy, surface-based off-highway sector can be addressed in three major machine categories: (1) engine/aftertreatment and fuels/lubes, (2) machine systems, and (3) thermal management. Working groups convened to address these topical areas. The status of off-highway technologies was determined, critical technical barriers to achieving future emission standards were identified, and strategies and technologies for reducing fuel consumption were discussed. Priority areas for R&D were identified. Given the apparent success of the discussions at the workshop, several participants from industry agreed to help in the formation of a joint industry/government ''roadmap'' team. The U.S. Department of Energy's Office of Heavy Vehicle Technologies has an extensive role in researching ways to make heavy-duty trucks and trains more efficient, with respect to both fuel usage and air emissions. The workshop participants felt that a joint industry/government research program that addresses the unique needs of the off-highway sector would complement the current research program for highway vehicles. With industry expertise, in-kind contributions, and federal government funding (coupled with the resources at the DOE's national laboratories), an effective program can be planned and executed. This document outlines potential technology R&D pathways to greatly reduce emissions from the off-highway sector and yet greatly reduce fuel costs cost-effectively and safely. The status of technology, technical targets, barriers, and technical approaches toward R&D are presented. Program schedule and milestones are included.« less

NASA's computer science research program

NASA Technical Reports Server (NTRS)

Larsen, R. L.

1983-01-01

Following a major assessment of NASA's computing technology needs, a new program of computer science research has been initiated by the Agency. The program includes work in concurrent processing, management of large scale scientific databases, software engineering, reliable computing, and artificial intelligence. The program is driven by applications requirements in computational fluid dynamics, image processing, sensor data management, real-time mission control and autonomous systems. It consists of university research, in-house NASA research, and NASA's Research Institute for Advanced Computer Science (RIACS) and Institute for Computer Applications in Science and Engineering (ICASE). The overall goal is to provide the technical foundation within NASA to exploit advancing computing technology in aerospace applications.

Aviation Safety/Automation Program Conference

NASA Technical Reports Server (NTRS)

Morello, Samuel A. (Compiler)

1990-01-01

The Aviation Safety/Automation Program Conference - 1989 was sponsored by the NASA Langley Research Center on 11 to 12 October 1989. The conference, held at the Sheraton Beach Inn and Conference Center, Virginia Beach, Virginia, was chaired by Samuel A. Morello. The primary objective of the conference was to ensure effective communication and technology transfer by providing a forum for technical interchange of current operational problems and program results to date. The Aviation Safety/Automation Program has as its primary goal to improve the safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers.

Molten nitrate salt technology development

NASA Astrophysics Data System (ADS)

Carling, R. W.

1981-04-01

This paper presents an overview of the experimental programs underway in support of the Thermal Energy Storage for Solar Thermal Applications (TESSTA) program. The experimental programs are concentrating on molten nitrate salts which have been proposed as heat transfer and energy storage medium. The salt composition of greatest interest is drawsalt, nominally a 50-50 molar mixture of NaNO3 and KNO3 with a melting point of 220 C. Several technical uncertainties have been identified that must be resolved before nitrate based solar plants can be commercialized. Research programs at Sandia National Laboratories, universities, and industrial suppliers have been implemented to resolve these technical uncertainties. The experimental programs involve corrosion, decomposition, physical properties, and environmental cracking. Summaries of each project and how they impact central receiver applications such as the repowering/industrial retrofit and cogeneration program are presented.

NASA/Army Rotorcraft Technology. Volume 2: Materials and Structures, Propulsion and Drive Systems, Flight Dynamics and Control, and Acoustics

NASA Technical Reports Server (NTRS)

1988-01-01

The Conference Proceedings is a compilation of over 30 technical papers presented which report on the advances in rotorcraft technical knowledge resulting from NASA, Army, and industry research programs over the last 5 to 10 years. Topics addressed in this volume include: materials and structures; propulsion and drive systems; flight dynamics and control; and acoustics.

Earth land landing alternatives: Lunar transportation system

NASA Technical Reports Server (NTRS)

Meyerson, Robert

1992-01-01

The objectives of this study are as follows: (1) develop a landing option such that it is a viable trade option for future NASA missions; (2) provide NASA programs with solid technical support in the landing systems area; (3) develop the technical staff; and (4) advance the state of landing systems technology to apply to future NASA missions. All results are presented in viewgraph format.

Blending Face-to-Face and Distance Learning Methods in Adult and Career-Technical Education. Practice Application Brief No. 23.

ERIC Educational Resources Information Center

Wonacott, Michael E.

Both face-to-face and distance learning methods are currently being used in adult education and career and technical education. In theory, the advantages of face-to-face and distance learning methods complement each other. In practice, however, both face-to-face and information and communications technology (ICT)-based distance programs often rely…

Polymer Energy Rechargeable System (PERS) Development Program

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Manzo, Michelle A.; Dalton, Penni J.; Marsh, Richard A.; Surampudi, Rao

2001-01-01

The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) have recently established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The overall objective of this development program, which is referred to as PERS, Polymer Energy Rechargeable System, is to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative will exploit both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases will focus on R&D activities to address the critical technical issues and challenges at the cell level.

Destruction and Vitrification of Asbestos Using Plasma Arc Technology (Construction Productivity Advancement Research (CPAR) Program)

DTIC Science & Technology

1993-09-01

DOCUMENTATION PAGE M N Public mpsMIs b~ b•r tOr coleton of ia nlormmn ias edsimad to aevue 1 hour pw response , indudng the Snm ta raing e. taeu"tig aining...Asbestos Emergency Response Act of 1986 (AHERA), which mandates inspection in school grades Kindergarten through 12. Congress is currently...CRC), Georgia Institute of Technology, Atlanta, GA. The CRC was responsible for the technical portion of the research program; i.e., developing the test

A regional technology transfer program. [North Carolina Industrial Applications Center for the Southeast

NASA Technical Reports Server (NTRS)

1979-01-01

The proliferation of online searching capabilities among its industrial clients, changes in marketing staff and direction, use of Dun and Bradstreet marketing service files, growth of the Annual Service Package program, and services delivered to clients at the NASA funded North Carolina Science and Technology Research Center are described. The library search service was reactivated and enlarged, and a survey was conducted on the NC/STRC Technical Bulletin's effectiveness. Several quotations from clients assess the overall value of the Center's services.

Satellite Power Systems (SPS) concept definition study (Exhibit D). Volume 5: Systems engineering/integration research and technology

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1981-01-01

Guidelines and ground rules followed in the development of requirements for the SPS are presented. Development planning objectives are specified in each of these areas, and evolutionary SPS program scenarios are described for the various concepts studied during the past one year contract. Program descriptions are presented as planning packages of technical tasks, and schedule phasing. Each package identifies the ground based technology effort that will facilitate SPS definitions, designs, development, and operations.

Environmental Assessment and Finding of No Significant Impact (FONSI) of the Underground Technology Program, Rodgers Hollows, Fort Knox, Kentucky

DTIC Science & Technology

1994-10-01

Technical Report SL-94-21 October 1994 •(rn US Army Corps 00• of Engineers CM Waterways Experiment , Station Environmental Assessment and Finding of...Underground Technology Program, Rodgers Hollow, Fort Knox, KY by D.W. Murrell. J. S. Shore U.S. Army Corps of Engineers Waterways Experiment Station 3909...Evaluation. I. Shore, J. S. II. Unitedl States. Army. Corl:, of Engineers . Ull. U.S. Army En- gineer Waterways Experiment Station. IV. Structures

Space Electrochemical Research and Technology (SERT)

NASA Technical Reports Server (NTRS)

1987-01-01

The conference provided a forum to assess critical needs and technologies for the NASA electrochemical energy conversion and storage program. It was aimed at providing guidance to NASA on the appropriate direction and emphasis of that program. A series of related overviews were presented in the areas of NASA advanced mission models (space stations, low and geosynchronous Earth orbit missions, planetary missions, and space transportation). Papers were presented and workshops conducted in a variety of technical areas, including advanced rechargeables, advanced concepts, critical physical electrochemical issues, and modeling.

Vibration characteristics of the Transrapid TR08 Maglev System

DOT National Transportation Integrated Search

2002-03-01

As part of the Federal Railroad Administration's (FRA) Magnetic Levitation Transportation Technology Deployment Program, the technical report has been prepared to charaterize the vibration associated with the operation of the Transrapid International...

Noise characteristics of the Transrapid TR08 Maglev System

DOT National Transportation Integrated Search

2002-07-01

As part of the Federal Railroad Administration's (FRA) Magnetic Levitation Transportation Technology Deployment Program, this technical report has been prepared to characterize the noise associated with the operation of the Transrapid International (...

Integrated Requirements Analysis and Technology Roadmaps

NASA Technical Reports Server (NTRS)

1997-01-01

In fiscal year 1997, Strategic Insight performed analytical studies for NASA's Highly Reusable Space Transportation (HRST) program, creating program documents which illuminated technical requirements and critical research opportunities. Studies were performed to structure and confirm HRST's evolving technical requirements, building on Marshall's Phase 1 work, which defined HRST system concepts, analytical tools and high-level issues for assessment in Phase 2. Specifically, Strategic Insight: (1) Performed a requirements analysis to update HRST: An Advanced Concepts Study, Study Guidelines, Version 2.0 of January 22, 1996; only minor changes were recommended for the given parameters of interest to concept designers; (2) Conducted mini-workshops during HRST Working Group meetings on April 14-15, 1997 and July 22-24, 1997; and (3) Created structures for technology road maps of candidate HRST concepts, both subsystem and end-to-end concepts, emerging from the 13 cooperative agreement projects.

Space-based solar power conversion and delivery systems study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Hazelrigg, G. A., Jr.

1976-01-01

The technical and economic aspects of satellite solar power systems are presented with a focus on the current configuration 5000 MW system. The technical studies include analyses of the orbital system structures, control and stationkeeping, and the formulation of program plans and costs for input to the economic analyses. The economic analyses centered about the development and use of a risk analysis model for a system cost assessment, identification of critical issues and technologies, and to provide information for programmatic decision making. A preliminary economic examination of some utility interface issues is included. Under the present state-of-knowledge, it is possible to formulate a program plan for the development of a satellite solar power system that can be economically justified. The key area of technological uncertainty is man's ability to fabricate and assemble large structures in space.

Grid-Scale Energy Storage Demonstration of Ancillary Services Using the UltraBattery Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seasholtz, Jeff

2015-08-20

The collaboration described in this document is being done as part of a cooperative research agreement under the Department of Energy’s Smart Grid Demonstration Program. This document represents the Final Technical Performance Report, from July 2012 through April 2015, for the East Penn Manufacturing Smart Grid Program demonstration project. This Smart Grid Demonstration project demonstrates Distributed Energy Storage for Grid Support, in particular the economic and technical viability of a grid-scale, advanced energy storage system using UltraBattery ® technology for frequency regulation ancillary services and demand management services. This project entailed the construction of a dedicated facility on the Eastmore » Penn campus in Lyon Station, PA that is being used as a working demonstration to provide regulation ancillary services to PJM and demand management services to Metropolitan Edison (Met-Ed).« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6 percentage points higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the fourteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the period starting January 1, 2004 and ending March 31, 2004. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale shakedown and performance testing, program management and technology transfer.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6% higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the thirteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL under Contract No. DE-FC26-00FT40974. This report summarizes program accomplishments for the period starting October 1, 2003 and ending December 31, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale assembly, pilot-scale demonstration and program management and technology transfer.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6 percentage points higher than IGCC with conventional CO{sub 2} separation. The current R&D program has determined the feasibility of the integrated UFP technology through pilot-scale testing, and investigated operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrated experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the fifteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the period starting April 1, 2004 and ending June 30, 2004. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale testing, kinetic modeling, program management and technology transfer.« less

Introduction of Special Physics Topics (Geophysics) Through the Use of Physics Laboratory Projects

ERIC Educational Resources Information Center

Parker, R. H.; Whittles, A. B. L.

1970-01-01

Describes the objectives and content of a physics laboratory program for freshman students at the British Columbia Institute of Technology. The first part of the program consists of basic physics experiments, while the second part emphasizes student work on projects in geophysics that have direct technical applications. (LC)

Engineers of the Future: The Colorado School of Mines' McBride Honors Program.

ERIC Educational Resources Information Center

Olds, Barbara M.

1988-01-01

More educators argue that science and technology students must be more liberally educated. The McBride Honors Program at Colorado School of Mines addresses the needs of a global society by preparing engineers to be technically competent, with strong communication skills, and knowledge of societal issues. (MLW)

How Community Colleges Are Closing the Skills Gap through CTE and STEM Funding Innovations

ERIC Educational Resources Information Center

Lowry, Kimberly; Thomas-Anderson, Tricia

2017-01-01

This chapter summarizes funding trends to support career and technical education (CTE) and science, technology, engineering, and math (STEM) programs at community colleges compared to funding for similar programs at 4-year colleges and universities. Examples of intramural and extramural funding strategies as well as lessons learned and…

2005 Mississippi Curriculum Framework: Secondary Welding Theory and Applications. (Program CIP: 48.0508 - Welding Technology/Welder)

ERIC Educational Resources Information Center

Cochran, Harry; Lawrence, Kenneth; Wages, Larry; Box, Dale; Johnston, Joe; Switzer, Ronald

2005-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and instructors are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured…

Laboratory Animal Technician | Center for Cancer Research

Cancer.gov

PROGRAM DESCRIPTION The Laboratory Animal Sciences Program (LASP) provides exceptional quality animal care and technical support services for animal research performed at the National Cancer Institute at the Frederick National Laboratory for Cancer Research. LASP executes this mission by providing a broad spectrum of state-of-the-art technologies and services that are focused

Senior Laboratory Animal Technician | Center for Cancer Research

Cancer.gov

PROGRAM DESCRIPTION The Laboratory Animal Sciences Program (LASP) provides exceptional quality animal care and technical support services for animal research performed at the National Cancer Institute at the Frederick National Laboratory for Cancer Research. LASP executes this mission by providing a broad spectrum of state-of-the-art technologies and services that are focused

2006 Mississippi Curriculum Framework: Secondary Forestry. (Program CIP: 03.0511 - Forestry Technology/Technician)

ERIC Educational Resources Information Center

Research and Curriculum Unit, 2006

2006-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Toyota/Skyline Technical Education Network. Cooperative Demonstration Program. Final Performance Report.

ERIC Educational Resources Information Center

Skyline Coll., San Bruno, CA.

A joint project was conducted between Toyota Motor Sales and Skyline College (in the San Francisco, California, area) to create an automotive technician training program that would serve the needs of working adults. During the project, a model high technology curriculum suitable for adults was developed, the quality of instruction available for…

2005 Mississippi Curriculum Framework: Secondary Machine Tool Operation. (Program CIP: 48.0503 - Machine Shop Technology/Assistant)

ERIC Educational Resources Information Center

Gorman, Nathan; Parker, Ronald; Lurie, Charles; Maples, Thomas

2005-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

Atomic power in space: A history

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1987-03-01

''Atomic Power in Space,'' a history of the Space Isotope Power Program of the United States, covers the period from the program's inception in the mid-1950s through 1982. Written in non-technical language, the history is addressed to both the general public and those more specialized in nuclear and space technologies. 19 figs., 3 tabs.

Hazardous Materials Technology: A Community College's Response to a Critical Employment Need.

ERIC Educational Resources Information Center

Friedel, Janice N.; And Others

Studies conducted by the Eastern Iowa Community College District in 1986 revealed a lack of credit programs and curricula for training individuals in the technical aspects of hazardous materials management and need for hazardous materials technicians by local industry. In response, an associate of applied science (AAS) degree program in Hazardous…

The Native Telehealth Outreach and Technical Assistance Program: a community-based approach to the development of multimedia-focused health care information.

PubMed

Dick, Rhonda Wiegman; Manson, Spero M; Hansen, Amy L; Huggins, Annie; Trullinger, Lori

2007-01-01

The development and dissemination of culturally relevant health care information has traditionally taken a "top-down" approach. Governmental funding agencies and research institutions have too often dictated the importance and focus of health-related research and information dissemination. In addition, the digital divide has affected rural communities in such a way that their members often do not possess the knowledge or experience necessary to use technological resources. And, even when they do, their skills may be limited, adequate only for implementing applications and programs designed by others who live and work outside of these communities. This need became the driving force in the creation of the Native Telehealth Outreach and Technical Assistance Program. The goal of the program is to equip Native community members, at both the lay and professional levels, with the means to use technology to address tribal health care needs. The transfer of relevant technical knowledge and skills enables participants to develop projects which enhance the community-wide dissemination of health care information. Nine community health advocates and professionals participated in the initial cohort. Eight of the participants successfully developed multimedia-based projects including Web sites, interactive CD-ROMs, and video focusing on a variety of health concerns. At the conclusion of the 18-month program period, projects were disseminated throughout rural communities. The NTOTAP staff continues to evaluate the use of these projects and their benefits within the rural communities.

BCTR: Biological and Chemical Technologies Research 1994 annual summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petersen, G.

1995-02-01

The annual summary report presents the fiscal year (FY) 1994 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). Although the OIT was reorganized in 1991 and AICD no longer exists, this document reports on efforts conducted under the former structure. The annual summary report for 1994 (ASR 94) contains the following: program description (including BCTR program mission statement, historical background, relevance,more » goals and objectives); program structure and organization, selected technical and programmatic highlights for 1994; detailed descriptions of individual projects; a listing of program output, including a bibliography of published work; patents, and awards arising from work supported by BCTR.« less

Cloud County Community College Wind Energy Technology Project and Renewable Energy Center of Excellence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graham, Bruce

Cloud County Community College's (CCCC) Wind Energy Technology (WET) program is a leader in the renewable energy movement across Kansas and the USA. The field of renewable energy is a growing industry which continues to experience high demand for career opportunities. This CCCC/DOE project entailed two phases: 1) the installation of two Northwind 100 wind turbines, and 2) the continued development of the WET program curriculum, including enhancement of the CCCC Blade Repair Certificate program. This report provides a technical account of the total work performed, and is a comprehensive description of the results achieved.