THE U.S. ENVIRONMENTAL PROTECTION AGENCY'S SITE EMERGING TECHNOLOGY PROGRAM

EPA Science Inventory

Under the SITE Emerging Technology Program, the U.S. Environmental Protection Agency is seeking to foster the further development of technol- ogies that have been successfully tested at bench-scale and are now ready for pilot-scale testing, prior to field- or full-scale demonstra...

Maturity Assessment of Space Plug-and-Play Architecture

DTIC Science & Technology

2013-03-01

SSM SPA Service Module SRL System Readiness Level TAT Time-at-Tone TRA Technology Readiness Assessment TRL Technology Readiness Level USB Universal...maturity assessment—the Technology Readiness Level (TRL) process, the Integration Readiness Level (IRL) process, and the System Readiness Level ( SRL ...is an important hallmark of the SPA concept, and makes possible the composability and scalability of system designs that employ it. 14 4. SPA

Nuclear Systems Kilopower Overview

NASA Technical Reports Server (NTRS)

Palac, Don; Gibson, Marc; Mason, Lee; Houts, Michael; McClure, Patrick; Robinson, Ross

2016-01-01

The Nuclear Systems Kilopower Project was initiated by NASAs Space Technology Mission Directorate Game Changing Development Program in fiscal year 2015 to demonstrate subsystem-level technology readiness of small space fission power in a relevant environment (Technology Readiness Level 5) for space science and human exploration power needs. The Nuclear Systems Kilopower Project consists of two elements. The primary element is the Kilopower Prototype Test, also called the Kilopower Reactor Using Stirling Technology(KRUSTY) Test. This element consists of the development and testing of a fission ground technology demonstrator of a 1 kWe fission power system. A 1 kWe system matches requirements for some robotic precursor exploration systems and future potential deep space science missions, and also allows a nuclear ground technology demonstration in existing nuclear test facilities at low cost. The second element, the Mars Kilopower Scalability Study, consists of the analysis and design of a scaled-up version of the 1 kWe reference concept to 10 kWe for Mars surface power projected requirements, and validation of the applicability of the KRUSTY experiment to key technology challenges for a 10 kWe system. If successful, these two elements will lead to initiation of planning for a technology demonstration of a 10 kWe fission power capability for Mars surface outpost power.

How to Make STEM Education Cool for Students

ERIC Educational Resources Information Center

Steel, David

2012-01-01

Of all U.S. high school students who graduated in 2011, only 45 percent were ready for college-level math and a mere 30 percent were ready for science, according to ACT, a college-entrance testing agency. These data reflect the great challenge facing the United States in preparing students for science, technology, engineering, and math (STEM)…

Universal test system for system embedded optical interconnect

NASA Astrophysics Data System (ADS)

Pitwon, R.; Wang, K.; Immonen, M.; Schröder, H.; Neitz, M.

2018-02-01

We introduce a universal test and measurement system allowing comparative characterisation of optical transceivers, board-to-board optical connectors and both embedded and passive optical circuit boards. The system comprises a test enclosure with interlocking and interchangeable test cards, allowing different technologies spanning different Technology Readiness Levels to be both characterised alone and in combination with other technologies. They form part of the open test design standards portfolio developed on the FP7 PhoxTroT and H2020 COSMICC projects and allow testing on a common test platform.

Regenerative fuel cell systems for space station

NASA Technical Reports Server (NTRS)

Hoberecht, M. A.; Sheibley, D. W.

1985-01-01

Regenerative fuel cell (RFC) systems are the leading energy storage candidates for Space Station. Key design features are the advanced state of technology readiness and high degree of system level design flexibility. Technology readiness was demonstrated through testing at the single cell, cell stack, mechanical ancillary component, subsystem, and breadboard levels. Design flexibility characteristics include independent sizing of power and energy storage portions of the system, integration of common reactants with other space station systems, and a wide range of various maintenance approaches. The design features led to selection of a RFC system as the sole electrochemical energy storage technology option for the space station advanced development program.

Prioritizing Information Technology Investments: Assessing the Correlations among Technological Readiness, Information Technology Flexibility, and Information Technology Effectiveness

ERIC Educational Resources Information Center

Walter, John T.

2010-01-01

Management's dilemma, when allocating financial resources towards the improvement of technological readiness and IT flexibility within their organizations, is to control financial risk and maximize IT effectiveness. Technological readiness is people's propensity to embrace and use technology. Its drivers are optimism, innovativeness, discomfort,…

The Perceptions of Change and Change Readiness in Junior and Senior Engineering & Technology Students

NASA Astrophysics Data System (ADS)

Moler, Perry J.

The purpose of this study was to understand what perceptions junior and senior engineering & technology students have about change, change readiness, and selected attributes, skills, and abilities. The selected attributes, skills, and abilities for this study were lifelong learning, leadership, and self-efficacy. The business environment of today is dynamic, with any number of internal and external events requiring an organization to adapt through the process of organizational development. Organizational developments affect businesses as a whole, but these developments are more evident in fields related to engineering and technology. Which require employees working through such developments be flexible and adaptable to a new professional environment. This study was an Explanatory Sequential Mixed Methods design, with Stage One being an online survey that collected individuals' perceptions of change, change readiness, and associated attributes, skills, and abilities. Stage Two was a face-to-face interview with a random sample of individuals who agreed to be interviewed in Stage One. This process was done to understand why students' perceptions are what they are. By using a mixed-method study, a more complete understanding of the current perceptions of students was developed, thus allowing external stakeholders' such as Human Resource managers more insight into the individuals they seek to recruit. The results from Stage One, one sample T-test with a predicted mean of 3.000 for this study indicated that engineering & technology students have a positive perceptions of Change Mean = 3.7024; Change Readiness Mean = 3.9313; Lifelong Learning Mean = 4.571; Leadership = 4.036; and Self-Efficacy Mean = 4.321. A One-way ANOVA was also conducted to understand the differences between traditional and non-traditional student regarding change and change readiness. The results of the ANOVA test indicated there were no significant differences between these two groups. The results from Stage Two showed that students perceived change as both positive and negative. This perception stems from their life experiences rather than from educational or professional experiences. The same can be said for the concepts of change readiness, lifelong learning, leadership, and self-efficacy. This indicates that engineering & technology programs should implement these concepts into their curriculum to better prepare engineering & technology students to enter into professional careers.

Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

ERIC Educational Resources Information Center

Gyamfi, Stephen Adu

2016-01-01

This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

E-health readiness assessment framework in iran.

PubMed

Rezai-Rad, M; Vaezi, R; Nattagh, F

2012-01-01

Concept of e-readiness is used in many areas such as e-business, e-commerce, e-government, and e-banking. In terms of healthcare, e-readiness is a rather new concept, and is propounded under the title of E-healthcare. E-health readiness refers to the readiness of communities and healthcare institutions for the expected changes brought by programs related to Information and Communications Technology (lCT). The present research is conducted aiming at designing E-health Readiness Assessment Framework (EHRAF) in Iran. The e-health readiness assessment framework was designed based on reviewing literature on e-readiness assessment models and opinions of ICT and health experts. In the next step, Delphi method was used to develop and test the designed framework. Three questionnaires developed to test and modify the model while determining weights of the indices; afterward they were either sent to experts through email or delivered to them in face. The designed framework approved with 4 dimensions, 11 constituents and 58 indices. Technical readiness had the highest importance coefficient (0.256099), and the other dimensions were of the next levels of coefficient importance: core readiness (0.25520), social communication readiness (0.244658), and engagement readiness (0.244039). The framework presents the movement route and investment priorities in e-health in Iran. The proposed framework is a good instrument for measuring the e-readiness in health centers in Iran, and for identifying strengths and weaknesses of these centers to access ICT and its implementation for more effectiveness and for analyzing digital divide between them, as well.

E-Health Readiness Assessment Framework in Iran

PubMed Central

Rezai-Rad, M; Vaezi, R; Nattagh, F

2012-01-01

Background: Concept of e-readiness is used in many areas such as e-business, e-commerce, e-government, and e-banking. In terms of healthcare, e-readiness is a rather new concept, and is propounded under the title of E-healthcare. E-health readiness refers to the readiness of communities and healthcare institutions for the expected changes brought by programs related to Information and Communications Technology (lCT). The present research is conducted aiming at designing E-health Readiness Assessment Framework (EHRAF) in Iran. Methods: The e-health readiness assessment framework was designed based on reviewing literature on e-readiness assessment models and opinions of ICT and health experts. In the next step, Delphi method was used to develop and test the designed framework. Three questionnaires developed to test and modify the model while determining weights of the indices; afterward they were either sent to experts through email or delivered to them in face. Results: The designed framework approved with 4 dimensions, 11 constituents and 58 indices. Technical readiness had the highest importance coefficient (0.256099), and the other dimensions were of the next levels of coefficient importance: core readiness (0.25520), social communication readiness (0.244658), and engagement readiness (0.244039). Conclusion: The framework presents the movement route and investment priorities in e-health in Iran. The proposed framework is a good instrument for measuring the e-readiness in health centers in Iran, and for identifying strengths and weaknesses of these centers to access ICT and its implementation for more effectiveness and for analyzing digital divide between them, as well. PMID:23304661

Technology Readiness of School Teachers: An Empirical Study of Measurement and Segmentation

ERIC Educational Resources Information Center

Badri, Masood; Al Rashedi, Asma; Yang, Guang; Mohaidat, Jihad; Al Hammadi, Arif

2014-01-01

The Technology Readiness Index (TRI) developed by Parasuraman (2000) was adapted to measure the technology readiness of public school teachers in Abu Dhabi, United Arab Emirates. The study aims at better understanding the factors (mostly demographics) that affect such readiness levels. In addition, Abu Dhabi teachers are segmented into five main…

Fission Surface Power Systems (FSPS) Project Final Report for the Exploration Technology Development Program (ETDP): Fission Surface Power, Transition Face to Face

NASA Technical Reports Server (NTRS)

Palac, Donald T.

2011-01-01

The Fission Surface Power Systems Project became part of the ETDP on October 1, 2008. Its goal was to demonstrate fission power system technology readiness in an operationally relevant environment, while providing data on fission system characteristics pertinent to the use of a fission power system on planetary surfaces. During fiscal years 08 to 10, the FSPS project activities were dominated by hardware demonstrations of component technologies, to verify their readiness for inclusion in the fission surface power system. These Pathfinders demonstrated multi-kWe Stirling power conversion operating with heat delivered via liquid metal NaK, composite Ti/H2O heat pipe radiator panel operations at 400 K input water temperature, no-moving-part electromagnetic liquid metal pump operation with NaK at flight-like temperatures, and subscale performance of an electric resistance reactor simulator capable of reproducing characteristics of a nuclear reactor for the purpose of system-level testing, and a longer list of component technologies included in the attached report. Based on the successful conclusion of Pathfinder testing, work began in 2010 on design and development of the Technology Demonstration Unit (TDU), a full-scale 1/4 power system-level non-nuclear assembly of a reactor simulator, power conversion, heat rejection, instrumentation and controls, and power management and distribution. The TDU will be developed and fabricated during fiscal years 11 and 12, culminating in initial testing with water cooling replacing the heat rejection system in 2012, and complete testing of the full TDU by the end of 2014. Due to its importance for Mars exploration, potential applicability to missions preceding Mars missions, and readiness for an early system-level demonstration, the Enabling Technology Development and Demonstration program is currently planning to continue the project as the Fission Power Systems project, including emphasis on the TDU completion and testing.

e-Health readiness assessment factors and measuring tools: A systematic review.

PubMed

Yusif, Salifu; Hafeez-Baig, Abdul; Soar, Jeffrey

2017-11-01

The evolving, adoption and high failure nature of health information technology (HIT)/IS/T systems requires effective readiness assessment to avert increasing failures while increasing system benefits. However, literature on HIT readiness assessment is myriad and fragmented. This review bares the contours of the available literature concluding in a set of manageable and usable recommendations for policymakers, researchers, individuals and organizations intending to assess readiness for any HIT implementation. Identify studies, analyze readiness factors and offer recommendations. Published articles 1995-2016 were searched using Medline/PubMed, Cinahl, Web of Science, PsychInfo, ProQuest. Studies were included if they were assessing IS/T/mHealth readiness in the context of HIT. Articles not written in English were excluded. Themes that emerged in the process of the data synthesis were thematically analysed and interpreted. Analyzed themes were found across 63 articles. In accordance with their prevalence of use, they included but not limited to "Technological readiness", 30 (46%); "Core/Need/Motivational readiness", 23 (37%); "Acceptance and use readiness", 19 (29%); "Organizational readiness", 20 (21%); "IT skills/Training/Learning readiness" (18%), "Engagement readiness", 16 (24%) and "Societal readiness" (14%). Despite their prevalence in use, "Technological readiness", "Motivational readiness" and "Engagement readiness" all had myriad and unreliable measuring tools. Core readiness had relatively reliable measuring tools, which repeatedly been used in various readiness assessment studies CONCLUSION: Thus, there is the need for reliable measuring tools for even the most commonly used readiness assessment factors/constructs: Core readiness, Engagement and buy-ins readiness, Technological readiness and IT Skills readiness as this could serve as an immediate step in conducting effective/reliable e-Health readiness assessment, which could lead to reduced HIT implementation failures. Copyright © 2017 Elsevier B.V. All rights reserved.

Heatshield for Extreme Entry Environment Technology (HEEET) for Missions to Saturn and Beyond

NASA Technical Reports Server (NTRS)

Ellerby, D.; Blosser, M.; Chinnapongse, R.; Fowler, M.; Gasch, M.; Hamm, K.; Kazemba, C.; Ma, J.; Milos, F.; Nishioka, O.;

Heatshield for Extreme Entry Environment Technology (HEEET) - Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.;

Heatshield for Extreme Entry Environment Technology (HEEET) Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzaes, G.;

Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status for NF Missions

NASA Technical Reports Server (NTRS)

Ellerby, D.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Hamm, K.;

Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status

NASA Technical Reports Server (NTRS)

Ellerby, D.; Boghozian, T.; Driver, D.; Chavez-Garcia, J.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Kazemba, C.; Kellermann, C.;

The NASA Evolutionary Xenon Thruster (NEXT): NASA's Next Step for U.S. Deep Space Propulsion

NASA Technical Reports Server (NTRS)

Schmidt, George R.; Patterson, Michael J.; Benson, Scott W.

2008-01-01

NASA s Evolutionary Xenon Thruster (NEXT) project is developing next generation ion propulsion technologies to enhance the performance and lower the costs of future NASA space science missions. This is being accomplished by producing Engineering Model (EM) and Prototype Model (PM) components, validating these via qualification-level and integrated system testing, and preparing the transition of NEXT technologies to flight system development. The project is currently completing one of the final milestones of the effort, that is operation of an integrated NEXT Ion Propulsion System (IPS) in a simulated space environment. This test will advance the NEXT system to a NASA Technology Readiness Level (TRL) of 6 (i.e., operation of a prototypical system in a representative environment), and will confirm its readiness for flight. Besides its promise for upcoming NASA science missions, NEXT may have excellent potential for future commercial and international spacecraft applications.

Analysis of user readiness toward ICT usage at small medium enterprise in south tangerang

NASA Astrophysics Data System (ADS)

Napitupulu, D.; Syafrullah, M.; Rahim, R.; Abdullah, D.; Setiawan, MI

2018-04-01

Utilization of Information and Communication Technology (ICT) is still relatively low in the level of SMEs due to various limitations ranging from access to capital, till the marketing network. ICT is present to provide the ability for SMEs in improving the benefits and competitive advantage of the organization. This study aims to determine the level of readiness of SMEs in utilizing technology, especially ICT. The methodology used is a survey to see the technology readiness of 107 SMEs in South Tangerang selected by purposive sampling. The approach used is TRI (Technology Readiness Index) which is the individual perception of technology based on four criteria that is optimism, innovativeness, discomfort and insecurity. The results showed that the optimism and innovativeness variables significantly positively influence the technology readiness while the variables of discomfort and insecurity also significantly positively influence the readiness of ICT.

Design of the ARES Mars Airplane and Mission Architecture

NASA Technical Reports Server (NTRS)

Braun, Robert D.; Wright, Henry S.; Croom, Mark A.; Levine, Joel S.; Spencer, David A.

2006-01-01

Significant technology advances have enabled planetary aircraft to be considered as viable science platforms. Such systems fill a unique planetary science measurement gap, that of regional-scale, near-surface observation, while providing a fresh perspective for potential discovery. Recent efforts have produced mature mission and flight system concepts, ready for flight project implementation. This paper summarizes the development of a Mars airplane mission architecture that balances science, implementation risk and cost. Airplane mission performance, flight system design and technology maturation are described. The design, analysis and testing completed demonstrates the readiness of this science platform for use in a Mars flight project.

DU Processing Efficiency and Reclamation: Plasma Arc Melting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Imhoff, Seth D.; Aikin, Jr., Robert M.; Swenson, Hunter

The work described here corresponds to one piece of a larger effort to increase material usage efficiency during DU processing operations. In order to achieve this goal, multiple technologies and approaches are being tested. These technologies occupy a spectrum of technology readiness levels (TRLs). Plasma arc melting (PAM) is one of the technologies being investigated. PAM utilizes a high temperature plasma to melt materials. Depending on process conditions, there are potential opportunities for recycling and material reclamation. When last routinely operational, the LANL research PAM showed extremely promising results for recycling and reclamation of DU and DU alloys. The currentmore » TRL is lower due to machine idleness for nearly two decades, which has proved difficult to restart. This report describes the existing results, promising techniques, and the process of bringing this technology back to readiness at LANL.« less

Technology and Manufacturing Readiness of Early Market Motive and Non-Motive Hydrogen Storage Technologies for Fuel Cell Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronnebro, Ewa

PNNL’s objective in this report is to provide DOE with a technology and manufacturing readiness assessment to identify hydrogen storage technologies’ maturity levels for early market motive and non-motive applications and to provide a path forward toward commercialization. PNNL’s Technology Readiness Assessment (TRA) is based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies in varying levels of development. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale thatmore » is easily communicated to interagency partners. The TRA report documents the process used to conduct the TRA, reports the TRL and MRL for each assessed technology and provides recommendations based on the findings.« less

7 CFR 98.100 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS MEALS, READY-TO-EAT (MRE's), MEATS, AND MEAT PRODUCTS USDA Certification of Laboratories for the Testing of... specified in this subpart shall receive an AMS Science and Technology certificate to approve its analysis...

7 CFR 98.100 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS MEALS, READY-TO-EAT (MRE's), MEATS, AND MEAT PRODUCTS USDA Certification of Laboratories for the Testing of... specified in this subpart shall receive an AMS Science and Technology certificate to approve its analysis...

7 CFR 98.100 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS MEALS, READY-TO-EAT (MREs), MEATS, AND MEAT PRODUCTS USDA Certification of Laboratories for the Testing of... specified in this subpart shall receive an AMS Science and Technology certificate to approve its analysis...

7 CFR 98.100 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS MEALS, READY-TO-EAT (MRE's), MEATS, AND MEAT PRODUCTS USDA Certification of Laboratories for the Testing of... specified in this subpart shall receive an AMS Science and Technology certificate to approve its analysis...

NASA EEE Parts and Advanced Interconnect Program (AIP)

NASA Technical Reports Server (NTRS)

Gindorf, T.; Garrison, A.

1996-01-01

none given From Program Objectives: I. Accelerate the readiness of new technologies through development of validation, assessment and test method/tools II. Provide NASA Projects infusion paths for emerging technologies III. Provide NASA Projects technology selection, application and validation guidelines for harware and processes IV. Disseminate quality assurance, reliability, validation, tools and availability information to the NASA community.

DOE Office of Scientific and Technical Information (OSTI.GOV)

SAMS TL; GUILLOT S

Scoping laboratory scale tests were performed at the Chemical Engineering Department of the Georgia Institute of Technology (Georgia Tech), and the Hanford 222-S Laboratory, involving double-shell tank (DST) and single-shell tank (SST) Hanford waste simulants. These tests established the viability of the Lithium Hydrotalcite precipitation process as a solution to remove aluminum and recycle sodium hydroxide from the Hanford tank waste, and set the basis of a validation test campaign to demonstrate a Technology Readiness Level of 3.

Proceedings of the Annual National Conference on ADA Technology (9th) Held in Washington, DC on 4-7 March 1991

DTIC Science & Technology

1991-03-07

rsolve the attack; delay whil the weapon has to wait; RESOURCE ALLOCATION . PRIORITY OF signal readiness to CONTROL; TARGETS. AND BIAS OF THE SYSTEM...Communications Systems. focal point for Computer Resource He served as project manager for the Management (CRM), Advanced Software development of the Joint...Interface Test Technology (AST), Ada Technology, Systems (JITS) - the world’s largest Joint/Army Interoperability Testing distributed command and

Determinants of readiness to adopt mHealth in a rural community of Bangladesh.

PubMed

Khatun, Fatema; Heywood, Anita E; Ray, Pradeep K; Hanifi, S M A; Bhuiya, Abbas; Liaw, Siaw-Teng

2015-10-01

Evidence in favor of mHealth for healthcare delivery in settings where trained health workforce is limited or unavailable is accumulating. With rapid growth in access to mobile phones and an acute shortage of health workforce in Bangladesh, mHealth initiatives are increasing with more than 20 current initiatives in place. "Readiness" is a crucial prerequisite to the successful implementation of telehealth programs. However, systematic assessment of the community readiness for mHealth-based services in the country is lacking. We report on a recent study describing the influence of community readiness for mHealth of a rural Bangladesh community. A conceptual framework for mHealth readiness was developed, which included three categories: technological, motivational and resource readiness. This guided the questionnaire development for the survey conducted in the Chakaria sub-district of Bangladesh from November 2012 to April 2013. Multivariate logistic regression was used to examine ownership of mobile phones, use of the technology, and knowledge regarding awareness of mHealth services as predictors of the community readiness to adopt mHealth. A total of 4915 randomly selected household members aged 18 years and over completed the survey. The data explained the sub-categories of the readiness dimensions. In terms of access, 45% of respondents owned a mobile phone with ownership higher among males, younger participants and those in the highest socioeconomic quintiles. Results related to technological readiness showed that among mobile phone owners, 50% were aware of SMS but only sending and receiving SMS. Only 37% generally read the received SMS. Only 5% of respondents used the internet capabilities on their phone and 25% used voice messages. The majority (73%) of the participants were interested in joining mHealth programs in the future. Multivariate analysis showed that ownership of a mobile phone (aOR 1.3, 95% CI 1.1-1.5), younger age (aOR 2.6, 95% CI 2.1-3.3), males (aOR 1.8, 95% CI 1.6-2.1), educated respondents (11 years or more education) (aOR 11.1, 95% CI 6.2-19.2) and those belonging to the highest socio-economic group (aOR 3.7, 95% CI 2.9-4.7) were significantly independently associated with knowledge regarding awareness of current mHealth services. We developed a conceptual framework to assess community readiness for mHealth. We described three high level dimensions of readiness and have partially tested the conceptual framework in a rural sub-district in Bangladesh. We found that the community has some technological readiness but inequity was observed for human resource readiness and technological capabilities. The study population is motivated to use mHealth. Our conceptual framework is a promising tool to assist policy-makers in planning and implementing mHealth programs. Copyright © 2015. Published by Elsevier Ireland Ltd.

Evaluating the Acoustic Benefits of Over-the-Rotor Acoustic Treatments Installed on the Advanced Noise Control Fan

NASA Technical Reports Server (NTRS)

Gazella, Matthew R.; Takakura, Tamuto; Sutliff, Daniel L.; Bozak, Richard F.; Tester, Brian J.

2017-01-01

Over the last 15 years, over-the-rotor acoustic treatments have been evaluated by NASA with varying success. Recently, NASA has been developing the next generation of over-the-rotor acoustic treatments for fan noise reduction. The NASA Glenn Research Centers Advanced Noise Control Fan was used as a Low Technology Readiness Level test bed. A rapid prototyped in-duct array consisting of 50 microphones was employed, and used to correlate the in-duct analysis to the far-field acoustic levels and to validate an existing beam-former method. The goal of this testing was to improve the Technology Readiness Level of various over-the-rotor acoustic treatments by advancing the understanding of the physical mechanisms and projecting the far-field acoustic benefit.

Online Testing Suffers Setbacks in Multiple States

ERIC Educational Resources Information Center

Davis, Michelle R.

2013-01-01

Widespread technical failures and interruptions of recent online testing in a number of states have shaken the confidence of educators and policymakers in high-tech assessment methods and raised serious concerns about schools' technological readiness for the coming common-core online tests. The glitches arose as many districts in the 46 states…

Kilopower: Small and Affordable Fission Power Systems for Space

NASA Technical Reports Server (NTRS)

Mason, Lee; Palac, Don; Gibson, Marc

2017-01-01

The Nuclear Systems Kilopower Project was initiated by NASA's Space Technology Mission Directorate Game Changing Development Program in fiscal year 2015 to demonstrate subsystem-level technology readiness of small space fission power in a relevant environment (Technology Readiness Level 5) for space science and human exploration power needs. The Nuclear Systems Kilopower Project centerpiece is the Kilopower Reactor Using Stirling Technology (KRUSTY) test, which consists of the development and testing of a fission ground technology demonstrator of a 1 kWe-class fission power system. The technologies to be developed and validated by KRUSTY are extensible to space fission power systems from 1 to 10 kWe, which can enable higher power future potential deep space science missions, as well as modular surface fission power systems for exploration. The Kilopower Project is cofounded by NASA and the Department of Energy National Nuclear Security Administration (NNSA).KRUSTY include the reactor core, heat pipes to transfer the heat from the core to the power conversion system, and the power conversion system. Los Alamos National Laboratory leads the design of the reactor, and the Y-12 National Security Complex is fabricating it. NASA Glenn Research Center (GRC) has designed, built, and demonstrated the balance of plant heat transfer and power conversion portions of the KRUSTY experiment. NASA MSFC developed an electrical reactor simulator for non-nuclear testing, and the design of the reflector and shielding for nuclear testing. In 2016, an electrically heated non-fissionable Depleted Uranium (DU) core was tested at GRC in a configuration identical to the planned nuclear test. Once the reactor core has been fabricated and shipped to the Device Assembly Facility at the NNSAs Nevada National Security Site, the KRUSTY nuclear experiment will be assembled and tested. Completion of the KRUSTY experiment will validate the readiness of 1 to 10 kWe space fission technology for NASAs future requirements for sunlight-independent space power. An early opportunity for demonstration of In-Situ Resource Utilization (ISRU) capability on the surface of Mars is currently being considered for 2026 launch. Since a space fission system is the leading option for power generation for the first Mars human outpost, a smaller version of a planetary surface fission power system could be built to power the ISRU demonstration and ensure its end-to-end validity. Planning is underway to start the hardware development of this subscale flight demonstrator in 2018.

DOD Financial Management: Improvements Needed in the Navys Audit Readiness Efforts for Fund Balance with Treasury

DTIC Science & Technology

2016-08-01

prioritization of key information technology limits management’s ability to focus audit readiness efforts on the systems with the highest risk...corrective actions for the higher-risk systems first. For an audit readiness plan for key information technology systems, the Navy provided a schedule...prioritization of key information technology systems used in the FBWT process limits management’s ability to focus audit readiness efforts on the most

Lab-On-a-Chip Application Development (LOCAD): Bridging Technology Readiness for Exploration

NASA Technical Reports Server (NTRS)

Spearing, Scott F.; Jenkins, Andy

2004-01-01

At Marshall Space Flight Center we have established a capability to investigate the use of microfluidics for space flight. The Lab-On-a-Chip Application Development (LOCAD) team has created a program for advancing Technology Readiness Levels (TRL) of 1 and 2 to TRL 6 and 7, quickly and economically for Lab-On-a-Chip (LOC) applications. Scientists and engineers can utilize LOCAD'S process to efficiently learn about microfluidics and determine if microfluidics is applicable to their needs. Once the applicability has been determined, LOCAD can then perform tests to develop the new fluidic protocols which are different from macro-scale chemical reaction protocols. With this information new micro-fluidic devices can be created and tested. Currently, LOCAD is focused on using microfluidics for both Environmental Monitoring & Control, and Medical Systems. Eventually, handheld portable units utilizing LOC technology will perform rapid tests to determine water quality, and microbial contamination levels. Since LOC technology is drastically reduced in physical size, it thereby reduces power, weight, volume, and sample requirements, a big advantage considering the resource constraints associated with spaceflight. Another one of LOCAD's current activities is the development of a microfluidic system to aid in the search for life on Mars.

Making Technology Ready: Integrated Systems Health Management

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Oliver, Patrick J.

2007-01-01

This paper identifies work needed by developers to make integrated system health management (ISHM) technology ready and by programs to make mission infrastructure ready for this technology. This paper examines perceptions of ISHM technologies and experience in legacy programs. Study methods included literature review and interviews with representatives of stakeholder groups. Recommendations address 1) development of ISHM technology, 2) development of ISHM engineering processes and methods, and 3) program organization and infrastructure for ISHM technology evolution, infusion and migration.

Measuring readiness for and satisfaction with a hand hygiene e-learning course among healthcare workers in a paediatric oncology centre in Guatemala City

PubMed Central

Gonzalez, Miriam L.; Melgar, Mario; Homsi, Maysam; Shuler, Ana; Antillon-Klussmann, Federico; Matheu, Laura; Ramirez, Marylin; Grant, Michael M.; Lowther, Deborah L.; Relyea, George; Caniza, Miguela A.

2017-01-01

E-learning has been widely used in the infection control field and has been recommended for use in hand hygiene (HH) programs by the World Health Organization. Such strategies are effective and efficient for infection control, but factors such as learner readiness for this method should be determined to assure feasibility and suitability in low- to middle-income countries. We developed a tailored, e-learning, Spanish-language HH course based on the WHO guidelines for HH in healthcare settings for the pediatric cancer center in Guatemala City. We aimed to identify e-readiness factors that influenced HH course completion and evaluate HCWs’ satisfaction. Pearson’s chi-square test of independence was used to retrospectively compare e-readiness factors and course-completion status (completed, non-completed, and never-started). We surveyed 194 HCWs for e-readiness; 116 HCWs self-enrolled in the HH course, and 55 responded to the satisfaction survey. Most e-readiness factors were statistically significant between course-completion groups. Moreover, students were significantly more likely to complete the course if they had a computer with an Internet connection (P=0.001) and self-reported comfort with using a computer several times a week (p=0.001) and communicating through online technologies (p=0.001). Previous online course experience was not a significant factor (p=0.819). E-readiness score averages varied among HCWs, and mean scores for all e-readiness factors were significantly higher among medical doctors than among nurses. Nearly all respondents to the satisfaction survey agreed that e-learning was as effective as the traditional teaching method. Evaluating HCWs’ e-readiness is essential while integrating technologies into educational programs in low- to middle-income countries. PMID:29147140

Measuring readiness for and satisfaction with a hand hygiene e-learning course among healthcare workers in a paediatric oncology centre in Guatemala City.

PubMed

Gonzalez, Miriam L; Melgar, Mario; Homsi, Maysam; Shuler, Ana; Antillon-Klussmann, Federico; Matheu, Laura; Ramirez, Marylin; Grant, Michael M; Lowther, Deborah L; Relyea, George; Caniza, Miguela A

2016-01-01

E-learning has been widely used in the infection control field and has been recommended for use in hand hygiene (HH) programs by the World Health Organization. Such strategies are effective and efficient for infection control, but factors such as learner readiness for this method should be determined to assure feasibility and suitability in low- to middle-income countries. We developed a tailored, e-learning, Spanish-language HH course based on the WHO guidelines for HH in healthcare settings for the pediatric cancer center in Guatemala City. We aimed to identify e-readiness factors that influenced HH course completion and evaluate HCWs' satisfaction. Pearson's chi-square test of independence was used to retrospectively compare e-readiness factors and course-completion status (completed, non-completed, and never-started). We surveyed 194 HCWs for e-readiness; 116 HCWs self-enrolled in the HH course, and 55 responded to the satisfaction survey. Most e-readiness factors were statistically significant between course-completion groups. Moreover, students were significantly more likely to complete the course if they had a computer with an Internet connection (P=0.001) and self-reported comfort with using a computer several times a week (p=0.001) and communicating through online technologies (p=0.001). Previous online course experience was not a significant factor (p=0.819). E-readiness score averages varied among HCWs, and mean scores for all e-readiness factors were significantly higher among medical doctors than among nurses. Nearly all respondents to the satisfaction survey agreed that e-learning was as effective as the traditional teaching method. Evaluating HCWs' e-readiness is essential while integrating technologies into educational programs in low- to middle-income countries.

Solar Sail Propulsion Technology Readiness Level Database

NASA Technical Reports Server (NTRS)

Adams, Charles L.

2004-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office has been sponsoring 2 solar sail system design and development hardware demonstration activities over the past 20 months. Able Engineering Company (AEC) of Goleta, CA is leading one team and L Garde, Inc. of Tustin, CA is leading the other team. Component, subsystem and system fabrication and testing has been completed successfully. The goal of these activities is to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by 2006. These activities will culminate in the deployment and testing of 20-meter solar sail system ground demonstration hardware in the 30 meter diameter thermal-vacuum chamber at NASA Glenn Plum Brook in 2005. This paper will describe the features of a computer database system that documents the results of the solar sail development activities to-date. Illustrations of the hardware components and systems, test results, analytical models, relevant space environment definition and current TRL assessment, as stored and manipulated within the database are presented. This database could serve as a central repository for all data related to the advancement of solar sail technology sponsored by the ISPT, providing an up-to-date assessment of the TRL of this technology. Current plans are to eventually make the database available to the Solar Sail community through the Space Transportation Information Network (STIN).

Incorporating Human Readiness Levels at Sandia National Laboratories

DOE PAGES

See, Judi E.; Morris, Jason; Craft, Richard; ...

2018-01-24

Since 2010, the concept of human readiness levels has been under development as a possible supplement to the existing technology readiness level (TRL) scale. The intent is to provide a mechanism to address safety and performance risks associated with the human component in a system that parallels the TRL structure already familiar to the systems engineering community. Sandia National Laboratories in Albuquerque, New Mexico, initiated a study in 2015 to evaluate options to incorporate human readiness planning for Sandia processes and products. The study team has collected the majority of baseline assessment data and has conducted interviews to understand staffmore » perceptions of four different options for human readiness planning. Preliminary results suggest that all four options may have a vital role, depending on the type of work performed and the phase of product development. Upon completion of data collection, the utility of identified solutions will be assessed in one or more test cases.« less

Incorporating Human Readiness Levels at Sandia National Laboratories

DOE Office of Scientific and Technical Information (OSTI.GOV)

See, Judi E.; Morris, Jason; Craft, Richard

Since 2010, the concept of human readiness levels has been under development as a possible supplement to the existing technology readiness level (TRL) scale. The intent is to provide a mechanism to address safety and performance risks associated with the human component in a system that parallels the TRL structure already familiar to the systems engineering community. Sandia National Laboratories in Albuquerque, New Mexico, initiated a study in 2015 to evaluate options to incorporate human readiness planning for Sandia processes and products. The study team has collected the majority of baseline assessment data and has conducted interviews to understand staffmore » perceptions of four different options for human readiness planning. Preliminary results suggest that all four options may have a vital role, depending on the type of work performed and the phase of product development. Upon completion of data collection, the utility of identified solutions will be assessed in one or more test cases.« less

Readiness for living technology: a comparative study of the uptake of robot technology in the Danish health-care sector.

PubMed

Peronard, Jean-Paul

2013-01-01

This article is a comparative analysis between workers in health care with high and low degree of readiness for living technology such as robotics. To explore the differences among workers' readiness, statistical analysis was conducted in a data set obtained from 200 respondents. The results showed important differences between high- and low-readiness types on issues such as staff security, documentation, autonomy, and future challenges.

Relationship of Mobile Learning Readiness to Teacher Proficiency in Classroom Technology Integration

ERIC Educational Resources Information Center

Christensen, Rhonda; Knezek, Gerald

2016-01-01

Mobile learning readiness as a new aspect of technology integration for classroom teachers is confirmed through the findings of this study to be significantly aligned with well-established measures based on older information technologies. The Mobile Learning Readiness Survey (MLRS) generally exhibits the desirable properties of step-wise increases…

Use of Dual Electromagnetic Radiation Technology to Reduce Salmonella and Listeria monocytogenes Risk on Cooked and Packaged Meat Products

USDA-ARS?s Scientific Manuscript database

Pathogenic bacteria including Salmonella and Listeria can potentially contaminate ready-to-eat meats. These bacteria compromise the safety of our food supply. The objective of this research was to develop and test new low temperature pasteurization technology for packaged or thermally sensitive food...

Cost, Time, and Risk Assessment of Different Wave Energy Converter Technology Development Trajectories: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Jochem W; Laird, Daniel; Costello, Ronan

This paper presents a comparative assessment of three fundamentally different wave energy converter technology development trajectories. The three technology development trajectories are expressed and visualised as a function of technology readiness levels and technology performance levels. The assessment shows that development trajectories that initially prioritize technology readiness over technology performance are likely to require twice the development time, consume a threefold of the development cost, and are prone to a risk of technical or commercial failure of one order of magnitude higher than those development trajectories that initially prioritize technology performance over technology readiness.

Technology Readiness of Early Career Nurse Trainees: Utilization of the Technology Readiness Index (TRI).

PubMed

Odlum, Michelle

2016-01-01

Health Information Technology (HIT) adoption by clinicians, including nurses, will lead to reduction in healthcare costs and clinical errors and improve health outcomes. Understanding the importance of technology adoption, the current study utilized the Technology Readiness Index to explore technology perceptions of nursing students. Our analysis identifies factors that may influence perceptions of technology, including decreased optimism for students with clinical experience and increased discomfort of US born students. Our study provides insight to inform training programs to further meet the increasing demands of skilled nursing staff.

m-Health Policy Readiness and Enabling Factors: Comparisons of Sub-Saharan Africa and Organization for Economic Cooperation and Development Countries.

PubMed

Lee, Seohyun; Begley, Charles E; Morgan, Robert; Chan, Wenyaw; Kim, Sun-Young

2018-02-12

As an innovative solution to poor access to care in low- and middle-income countries (LMICs), m-health has gained wide attention in the past decade. Despite enthusiasm from the global health community, LMICs have not demonstrated high uptake of m-health promoting policies or public investment. To benchmark the current status, this study compared m-health policy readiness scores between sub-Saharan Africa and high-income Organization for Economic Cooperation and Development (OECD) countries using an independent two-sample t test. In addition, the enabling factors associated with m-health policy readiness were investigated using an ordinal logistic regression model. The study was based on the m-health policy readiness scores of 112 countries obtained from the World Health Organization Third Global Survey on e-Health. The mean m-health policy readiness score for sub-Saharan Africa was statistically significantly lower than that for OECD countries (p = 0.02). The enabling factors significantly associated with m-health policy readiness included information and communication technology development index (odds ratio [OR] 1.57; 95% confidence interval [CI] 1.12-2.2), e-health education for health professionals (OR 4.43; 95% CI 1.60-12.27), and the location in sub-Saharan Africa (OR 3.47; 95% CI 1.06-11.34). The findings of our study suggest dual policy goals for m-health in sub-Saharan Africa. First, enhance technological and educational support for m-health. Second, pursue global collaboration for building m-health capacity led by sub-Saharan African countries with hands-on experience and knowledge. Globally, countries should take a systematic and collaborative approach in pursuing m-health policy with the focus on technological and educational support.

Satellite Test of the Equivalence Principle, Overview and Progress

NASA Technical Reports Server (NTRS)

Kolodziejczak, Jeffery

2006-01-01

An overview of STEP, the Satellite test of the Equivalence Principle will be presented. This space-based experiment will test the Universality of free fall and is designed to advance the present state of knowledge by over 5 orders of magnitude. The international STEP collaboration is pursuing a development plan to improve and verify the technology readiness of key systems. We will discuss recent advances with an emphasis on accelerometer fabrication and test. The transfer of critical technologies successfully demonstrated in flight by the Gravity Probe B mission will be described.

Are California's Schools Ready for Online Testing and Learning?

ERIC Educational Resources Information Center

Gao, Niu

2015-01-01

In addition to the Common Core State Standards (CCSS), California is implementing a new, online assessment system: the California Assessment of Student Performance and Progress (CAASPP). Field tests were conducted last spring and the system is being rolled out this year, amid concerns about whether schools are technologically prepared. Using…

Orbit transfer rocket engine integrated control and health monitoring system technology readiness assessment

NASA Technical Reports Server (NTRS)

Bickford, R. L.; Collamore, F. N.; Gage, M. L.; Morgan, D. B.; Thomas, E. R.

1992-01-01

The objectives of this task were to: (1) estimate the technology readiness of an integrated control and health monitoring (ICHM) system for the Aerojet 7500 lbF Orbit Transfer Vehicle engine preliminary design assuming space based operations; and (2) estimate the remaining cost to advance this technology to a NASA defined 'readiness level 6' by 1996 wherein the technology has been demonstrated with a system validation model in a simulated environment. The work was accomplished through the conduct of four subtasks. In subtask 1 the minimally required functions for the control and monitoring system was specified. The elements required to perform these functions were specified in Subtask 2. In Subtask 3, the technology readiness level of each element was assessed. Finally, in Subtask 4, the development cost and schedule requirements were estimated for bringing each element to 'readiness level 6'.

Task 4 supporting technology. Part 2: Detailed test plan for thermal seals. Thermal seals evaluation, improvement and test. CAN8-1, Reusable Launch Vehicle (RLV), advanced technology demonstrator: X-33. Leading edge and seals thermal protection system technology demonstration

NASA Technical Reports Server (NTRS)

Hogenson, P. A.; Lu, Tina

1995-01-01

The objective is to develop the advanced thermal seals to a technology readiness level (TRL) of 6 to support the rapid turnaround time and low maintenance requirements of the X-33 and the future reusable launch vehicle (RLV). This program is divided into three subtasks: (1) orbiter thermal seals operation history review; (2) material, process, and design improvement; and (3) fabrication and evaluation of the advanced thermal seals.

Baby boomers' adoption of consumer health technologies: survey on readiness and barriers.

PubMed

LeRouge, Cynthia; Van Slyke, Craig; Seale, Deborah; Wright, Kevin

2014-09-08

As they age, baby boomers (born 1946-1964) will have increasing medical needs and are likely to place large demand on health care resources. Consumer health technologies may help stem rising health care needs and costs by improving provider-to-patient communication, health monitoring, and information access and enabling self-care. Research has not explored the degree to which baby boomers are ready for, or are currently embracing, specific consumer health technologies This study explores how baby boomers' readiness to use various technologies for health purposes compares to other segments of the adult population. The goals of the study are to (1) examine what technologies baby boomers are ready to use for health purposes, (2) investigate barriers to baby boomers' use of technology for health purposes, and (3) understand whether readiness for and barriers to baby boomers' use of consumer health technologies differ from those of other younger and older consumers. Data were collected via a survey offered to a random sample of 3000 subscribers to a large pharmacy benefit management company. Respondents had the option to complete the survey online or by completing a paper-based version of the survey. Data from 469 respondents (response rate 15.63%) were analyzed, including 258 baby boomers (aged 46-64 years), 72 younger (aged 18-45 years), and 139 older (age >64 years) participants. Baby boomers were found to be similar to the younger age group, but significantly more likely than the older age group to be ready to use 5 technologies for health purposes (health information websites, email, automated call centers, medical video conferencing, and texting). Baby boomers were less ready than the younger age group to adopt podcasts, kiosks, smartphones, blogs, and wikis for health care purposes. However, baby boomers were more likely than older adults to use smartphones and podcasts for health care purposes. Specific adoption barriers vary according to the technology. Baby boomers have commonalities with and distinctions from both younger and older adults in their readiness to adopt specific consumer health technologies and the barriers they experience to adoption. Baby boomers' nuances regarding readiness to adopt and the barriers associated with the various forms of consumer health technology should be taken into account by those interested in promoting consumer health technologies use among baby boomers when developing applications, choosing technologies, preparing users for use, and in promotional tactics.

Technology Innovations from NASA's Next Generation Launch Technology Program

NASA Technical Reports Server (NTRS)

Cook, Stephen A.; Morris, Charles E. K., Jr.; Tyson, Richard W.

2004-01-01

NASA's Next Generation Launch Technology Program has been on the cutting edge of technology, improving the safety, affordability, and reliability of future space-launch-transportation systems. The array of projects focused on propulsion, airframe, and other vehicle systems. Achievements range from building miniature fuel/oxygen sensors to hot-firings of major rocket-engine systems as well as extreme thermo-mechanical testing of large-scale structures. Results to date have significantly advanced technology readiness for future space-launch systems using either airbreathing or rocket propulsion.

Nuclear Electric Propulsion Technology Panel findings and recommendations

NASA Technical Reports Server (NTRS)

Doherty, Michael P.

1992-01-01

Summarized are the findings and recommendations of a triagency (NASA/DOE/DOD) panel on Nuclear Electric Propulsion (NEP) Technology. NEP has been identified as a candidate nuclear propulsion technology for exploration of the Moon and Mars as part of the Space Exploration Initiative (SEI). The findings are stated in areas of system and subsystem considerations, technology readiness, and ground test facilities. Recommendations made by the panel are summarized concerning: (1) existing space nuclear power and propulsion programs, and (2) the proposed multiagency NEP technology development program.

Technology Readiness Level Guidebook

DOT National Transportation Integrated Search

2017-09-01

This guidebook provides the necessary information for conducting a Technology Readiness Level (TRL) Assessment. TRL Assessments are a tool for determining the maturity of technologies and identifying next steps in the research process. This guidebook...

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6 percentage points higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the fourteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the period starting January 1, 2004 and ending March 31, 2004. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale shakedown and performance testing, program management and technology transfer.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6 percentage points higher than IGCC with conventional CO{sub 2} separation. The current R&D program has determined the feasibility of the integrated UFP technology through pilot-scale testing, and investigated operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrated experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the fifteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the period starting April 1, 2004 and ending June 30, 2004. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale testing, kinetic modeling, program management and technology transfer.« less

Are postgraduate students in distance medical education program ready for e-learning? A survey in Iran.

PubMed

Changiz, Tahereh; Haghani, Fariba; Nowroozi, Nasim

2013-01-01

Appropriate instructional design plays a crucial role in e-learning success, and analyzing learners is the cornerstone for instructional design process. Students' readiness for e-learning was assessed in the present study as an example of learner analysis for a distance course in medical education master program. A census sample of 23 students applied for distance master program on medical education, completed the "Students' E-Learning Readiness Scale" developed by Watkins, via email. The reliability and validity of the scale has been confirmed before. Average scores in total and 6 subscales were calculated. The score range was 1-5 and scores above 3 indicated good readiness. Data was interpreted using descriptive and non-parametric tests (Mann-Whitney U and Kruskal-Wallis). Response rate was 100%. The students' readiness scores in total and all subscales ("technology access", "online skills and relationships", "motivation", "online audio/video", "readiness for online discussions", and "importance of e-learning to your success") were above 3. Comparing different subscales, students' mean scores in "motivation" and "internet discussion" subscales were less than others, although the difference was not significant. There were no significant gender differences in the readiness scores. Students who were academic staff had significantly higher scores than others in total and in "motivation" and "online skills and relationship" subscales. Good learners' readiness, observed in the present study, may imply that the instructional designer can rely on e-learning strategies and build the course upon them. However, according to the slightly lower scores in "motivation" and "online discussion" subscales, it is recommended to stress more on strategies that improve these two components. To generalize the results, it is needed to test students' readiness in more different degree programs.

Aeronautical-Satellite-Assisted Process Being Developed for Information Exchange Through Network Technologies (Aero-SAPIENT)

NASA Technical Reports Server (NTRS)

Zernic, Michael J.

2001-01-01

Communications technologies are being developed to address safety issues during aviation travel. Some of these technologies enable the aircraft to be in constant bidirectional communications with necessary systems, people, and other aircraft that are not currently in place today. Networking technologies, wireless datalinks, and advanced avionics techniques are areas of particular importance that the NASA Glenn Research Center has contributed. Glenn, in conjunction with the NASA Ames Research Center, NASA Dryden Flight Research Center, and NASA Langley Research Center, is investigating methods and applications that would utilize these communications technologies. In mid-June 2000, the flight readiness of the network and communications technologies were demonstrated via a simulated aircraft. A van simulating an aircraft was equipped with advanced phased-array antennas (Advanced Communications/Air Traffic Management (AC/ATM) Advanced Air Transportation Technologies (AATT) project) that used commercial Ku-band satellite communications to connect Glenn, Dryden, and Ames in a combined system ground test. This test simulated air-ground bidirectional transport of real-time digital audio, text, and video data via a hybrid network configuration that demonstrated the flight readiness of the network and communications technologies. Specifically, a Controller Pilot Data Link Communications application was used with other applications to demonstrate a multiprotocol capability via Internet-protocol encapsulated ATN (Aeronautical Telecommunications Network) data packets. The significance of this combined ground test is its contribution to the Aero Information Technology Base Program Level I milestone (Software Technology investment area) of a real-time data link for the National Airspace System. The objective of this milestone was to address multiprotocol technology applicable for real-time data links between aircraft, a satellite, and the ground as well as the ability to distribute flight data with multilevel priorities among several sites.

HYDRA: Macroscopic 3D Approach of Light Weight Ablator

NASA Astrophysics Data System (ADS)

Pinaud, G.; Barcena, J.; Bouilly, J.-M.; Leroy, V.; Fischer, Wpp.; Massuti, T.

2014-06-01

The HYDRA project is an European funded program that aims at developing novel solution in term of TPS associated to a demonstration of Technology Readiness Level (TRL) 4. We describe modelling activities (radiation/ablation) compared to plasma test.

Formation Flying for Satellites and Unmanned Aerial Vehicles

NASA Technical Reports Server (NTRS)

Merrill, Garrick

2015-01-01

The shrinking size of satellites and unmanned aerial vehicles (UAVs) is enabling lower cost missions. As sensors and electronics continue to downsize, the next step is multiple vehicles providing different perspectives or variations for more precise measurements. While flying a single satellite or UAV autonomously is a challenge, flying multiple vehicles in a precise formation is even more challenging. The goal of this project is to develop a scalable mesh network between vehicles (satellites or UAVs) to share real-time position data and maintain formations autonomously. Newly available low-cost, commercial off-the-shelf credit card size computers will be used as the basis for this network. Mesh networking techniques will be used to provide redundant links and a flexible network. The Small Projects Rapid Integration and Test Environment Lab will be used to simulate formation flying of satellites. UAVs built by the Aero-M team will be used to demonstrate the formation flying in the West Test Area. The ability to test in flight on NASA-owned UAVs allows this technology to achieve a high Technology Readiness Level (TRL) (TRL-4 for satellites and TRL-7 for UAVs). The low cost of small UAVs and the availability of a large test range (West Test Area) dramatically reduces the expense of testing. The end goal is for this technology to be ready to use on any multiple satellite or UAV mission.

Space station propulsion technology

NASA Technical Reports Server (NTRS)

Briley, G. L.

1986-01-01

The progress on the Space Station Propulsion Technology Program is described. The objectives are to provide a demonstration of hydrogen/oxygen propulsion technology readiness for the Initial Operating Capability (IOC) space station application, specifically gaseous hydrogen/oxygen and warm hydrogen thruster concepts, and to establish a means for evolving from the IOC space station propulsion to that required to support and interface with advanced station functions. The evaluation of concepts was completed. The accumulator module of the test bed was completed and, with the microprocessor controller, delivered to NASA-MSFC. An oxygen/hydrogen thruster was modified for use with the test bed and successfully tested at mixture ratios from 4:1 to 8:1.

Hybrid Propulsion Demonstration Program 250K Hybrid Motor

NASA Technical Reports Server (NTRS)

Story, George; Zoladz, Tom; Arves, Joe; Kearney, Darren; Abel, Terry; Park, O.

2003-01-01

The Hybrid Propulsion Demonstration Program (HPDP) program was formed to mature hybrid propulsion technology to a readiness level sufficient to enable commercialization for various space launch applications. The goal of the HPDP was to develop and test a 250,000 pound vacuum thrust hybrid booster in order to demonstrate hybrid propulsion technology and enable manufacturing of large hybrid boosters for current and future space launch vehicles. The HPDP has successfully conducted four tests of the 250,000 pound thrust hybrid rocket motor at NASA's Stennis Space Center. This paper documents the test series.

DOD Financial Management: Significant Efforts Still Needed for Remediating Audit Readiness Deficiencies

DTIC Science & Technology

2017-02-01

19As defined in generally accepted government auditing standards, information technology controls...Financial Improvement and Audit Readiness (FIAR) Plan Status Report, while DOD continues to make progress in addressing information technology ...DOD FINANCIAL MANAGEMENT Significant Efforts Still Needed for Remediating Audit Readiness Deficiencies Report to

Baby Boomers’ Adoption of Consumer Health Technologies: Survey on Readiness and Barriers

PubMed Central

2014-01-01

Background As they age, baby boomers (born 1946-1964) will have increasing medical needs and are likely to place large demand on health care resources. Consumer health technologies may help stem rising health care needs and costs by improving provider-to-patient communication, health monitoring, and information access and enabling self-care. Research has not explored the degree to which baby boomers are ready for, or are currently embracing, specific consumer health technologies This study explores how baby boomers’ readiness to use various technologies for health purposes compares to other segments of the adult population. Objective The goals of the study are to (1) examine what technologies baby boomers are ready to use for health purposes, (2) investigate barriers to baby boomers’ use of technology for health purposes, and (3) understand whether readiness for and barriers to baby boomers’ use of consumer health technologies differ from those of other younger and older consumers. Methods Data were collected via a survey offered to a random sample of 3000 subscribers to a large pharmacy benefit management company. Respondents had the option to complete the survey online or by completing a paper-based version of the survey. Results Data from 469 respondents (response rate 15.63%) were analyzed, including 258 baby boomers (aged 46-64 years), 72 younger (aged 18-45 years), and 139 older (age >64 years) participants. Baby boomers were found to be similar to the younger age group, but significantly more likely than the older age group to be ready to use 5 technologies for health purposes (health information websites, email, automated call centers, medical video conferencing, and texting). Baby boomers were less ready than the younger age group to adopt podcasts, kiosks, smartphones, blogs, and wikis for health care purposes. However, baby boomers were more likely than older adults to use smartphones and podcasts for health care purposes. Specific adoption barriers vary according to the technology. Conclusions Baby boomers have commonalities with and distinctions from both younger and older adults in their readiness to adopt specific consumer health technologies and the barriers they experience to adoption. Baby boomers’ nuances regarding readiness to adopt and the barriers associated with the various forms of consumer health technology should be taken into account by those interested in promoting consumer health technologies use among baby boomers when developing applications, choosing technologies, preparing users for use, and in promotional tactics. PMID:25199475

Fission Surface Power Technology Development Update

NASA Technical Reports Server (NTRS)

Palac, Donald T.; Mason, Lee S.; Houts, Michael G.; Harlow, Scott

2011-01-01

Power is a critical consideration in planning exploration of the surfaces of the Moon, Mars, and places beyond. Nuclear power is an important option, especially for locations in the solar system where sunlight is limited or environmental conditions are challenging (e.g., extreme cold, dust storms). NASA and the Department of Energy are maintaining the option for fission surface power for the Moon and Mars by developing and demonstrating technology for a fission surface power system. The Fission Surface Power Systems project has focused on subscale component and subsystem demonstrations to address the feasibility of a low-risk, low-cost approach to space nuclear power for surface missions. Laboratory demonstrations of the liquid metal pump, reactor control drum drive, power conversion, heat rejection, and power management and distribution technologies have validated that the fundamental characteristics and performance of these components and subsystems are consistent with a Fission Surface Power preliminary reference concept. In addition, subscale versions of a non-nuclear reactor simulator, using electric resistance heating in place of the reactor fuel, have been built and operated with liquid metal sodium-potassium and helium/xenon gas heat transfer loops, demonstrating the viability of establishing system-level performance and characteristics of fission surface power technologies without requiring a nuclear reactor. While some component and subsystem testing will continue through 2011 and beyond, the results to date provide sufficient confidence to proceed with system level technology readiness demonstration. To demonstrate the system level readiness of fission surface power in an operationally relevant environment (the primary goal of the Fission Surface Power Systems project), a full scale, 1/4 power Technology Demonstration Unit (TDU) is under development. The TDU will consist of a non-nuclear reactor simulator, a sodium-potassium heat transfer loop, a power conversion unit with electrical controls, and a heat rejection system with a multi-panel radiator assembly. Testing is planned at the Glenn Research Center Vacuum Facility 6 starting in 2012, with vacuum and liquid-nitrogen cold walls to provide simulation of operationally relevant environments. A nominal two-year test campaign is planned including a Phase 1 reactor simulator and power conversion test followed by a Phase 2 integrated system test with radiator panel heat rejection. The testing is expected to demonstrate the readiness and availability of fission surface power as a viable power system option for NASA's exploration needs. In addition to surface power, technology development work within this project is also directly applicable to in-space fission power and propulsion systems.

Fuel-Flexible Gasification-Combustion Technology for Production of H2 and Sequestration-Ready CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Raul Subia

GE Global Research is developing an innovative energy technology for coal gasification with high efficiency and near-zero pollution. This Unmixed Fuel Processor (UFP) technology simultaneously converts coal, steam and air into three separate streams of hydrogen-rich gas, sequestration-ready CO{sub 2}, and high-temperature, high-pressure vitiated air to produce electricity in gas turbines. This is the draft final report for the first stage of the DOE-funded Vision 21 program. The UFP technology development program encompassed lab-, bench- and pilot-scale studies to demonstrate the UFP concept. Modeling and economic assessments were also key parts of this program. The chemical and mechanical feasibility weremore » established via lab and bench-scale testing, and a pilot plant was designed, constructed and operated, demonstrating the major UFP features. Experimental and preliminary modeling results showed that 80% H{sub 2} purity could be achieved, and that a UFP-based energy plant is projected to meet DOE efficiency targets. Future work will include additional pilot plant testing to optimize performance and reduce environmental, operability and combined cycle integration risks. Results obtained to date have confirmed that this technology has the potential to economically meet future efficiency and environmental performance goals.« less

Future Ready Learning: Reimagining the Role of Technology in Education. 2016 National Education Technology Plan

ERIC Educational Resources Information Center

Thomas, Susan

2016-01-01

The National Education Technology Plan is the flagship educational technology policy document for the United States. The 2016 Plan, "Future Ready Learning: Reimagining the Role of Technology in Education," articulates a vision of equity, active use, and collaborative leadership to make everywhere, all-the-time learning possible. While…

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research (GEGR) has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GEGR (prime contractor) was awardedmore » a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GEGR, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on Aspen Plus process modeling, has an estimated process efficiency of 6% higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the third annual technical progress report for the UFP program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting October 1, 2002 and ending September 30, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, bench-scale experimental testing, process modeling, pilot-scale system design and assembly, and program management.« less

Developments in Science and Technology.

DTIC Science & Technology

1980-01-01

control. Sucessful completion of the testing and cer- a single unduplicated track file, thereby reducing tification of readiness represents a...Navy shipboard surveillance radar systems Service Corp., is called the single radar performance has been successfully designed, developed, and tested at...for Navy deteciion/disclosure ranges. The single radar per- shipboard surveillance radar systems are reduced by formance prediction system can be

Factors Affecting the Technology Readiness of Health Professionals

ERIC Educational Resources Information Center

Myers, Stephanie E.

2010-01-01

Federal government policies are promoting diffusion of technologies into the healthcare system. If health professionals reject the new technologies planned for the healthcare system, it could result in costly failures, delays, and workforce problems. There is a lack of knowledge about factors that affect technology readiness (TR), defined as the…

Comparative Analysis of Teacher Trainee Students' eLearning Technology (ELT) Readiness towards Promoting Global Curriculum Best Practice

ERIC Educational Resources Information Center

Ogwu, Edna N.

2016-01-01

This study compares teacher trainee students (TTSs), electronic learning technology (ELT) readiness, competence as well as their constraints to ELT readiness using 373 University education students' from Botswana and Nigeria that are randomly selected. Data was descriptively analysed based on the research objectives and hypotheses using mean…

An Investigation to Advance the Technology Readiness Level of the Centaur Derived On-orbit Propellant Storage and Transfer System

NASA Astrophysics Data System (ADS)

Silvernail, Nathan L.

This research was carried out in collaboration with the United Launch Alliance (ULA), to advance an innovative Centaur-based on-orbit propellant storage and transfer system that takes advantage of rotational settling to simplify Fluid Management (FM), specifically enabling settled fluid transfer between two tanks and settled pressure control. This research consists of two specific objectives: (1) technique and process validation and (2) computational model development. In order to raise the Technology Readiness Level (TRL) of this technology, the corresponding FM techniques and processes must be validated in a series of experimental tests, including: laboratory/ground testing, microgravity flight testing, suborbital flight testing, and orbital testing. Researchers from Embry-Riddle Aeronautical University (ERAU) have joined with the Massachusetts Institute of Technology (MIT) Synchronized Position Hold Engage and Reorient Experimental Satellites (SPHERES) team to develop a prototype FM system for operations aboard the International Space Station (ISS). Testing of the integrated system in a representative environment will raise the FM system to TRL 6. The tests will demonstrate the FM system and provide unique data pertaining to the vehicle's rotational dynamics while undergoing fluid transfer operations. These data sets provide insight into the behavior and physical tendencies of the on-orbit refueling system. Furthermore, they provide a baseline for comparison against the data produced by various computational models; thus verifying the accuracy of the models output and validating the modeling approach. Once these preliminary models have been validated, the parameters defined by them will provide the basis of development for accurate simulations of full scale, on-orbit systems. The completion of this project and the models being developed will accelerate the commercialization of on-orbit propellant storage and transfer technologies as well as all in-space technologies that utilize or will utilize similar FM techniques and processes.

Advanced gasifier and water gas shift technologies for low cost coal conversion to high hydrogen syngas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, Andrew Kramer

The Gas Technology Institute (GTI) and team members RTI International (RTI), Coanda Research and Development, and Nexant, are developing and maturing a portfolio of technologies to meet the United States Department of Energy (DOE) goals for lowering the cost of producing high hydrogen syngas from coal for use in carbon capture power and coal-to-liquids/chemicals. This project matured an advanced pilot-scale gasifier, with scalable and commercially traceable components, to readiness for use in a first-of-a-kind commercially-relevant demonstration plant on the scale of 500-1,000 tons per day (TPD). This was accomplished through cold flow simulation of the gasifier quench zone transition regionmore » at Coanda and through an extensive hotfire gasifier test program on highly reactive coal and high ash/high ash fusion temperature coals at GTI. RTI matured an advanced water gas shift process and catalyst to readiness for testing at pilot plant scale through catalyst development and testing, and development of a preliminary design basis for a pilot scale reactor demonstrating the catalyst. A techno-economic analysis was performed by Nexant to assess the potential benefits of the gasifier and catalyst technologies in the context of power production and methanol production. This analysis showed an 18%reduction in cost of power and a 19%reduction in cost of methanol relative to DOE reference baseline cases.« less

Technology requirements and readiness for very large vehicles

NASA Technical Reports Server (NTRS)

Conner, D. W.

1979-01-01

Common concerns of very large vehicles in the areas of economics, transportation system interfaces and operational problems were reviewed regarding their influence on vehicle configurations and technology. Fifty-four technology requirements were identified which are judged to be unique, or particularly critical, to very large vehicles. The requirements were about equally divided among the four general areas of aero/hydrodynamics, propulsion and acoustics, structures, and vehicle systems and operations. The state of technology readiness was judged to be poor to fair for slightly more than one half of the requirements. In the classic disciplinary areas, the state of technology readiness appears to be more advanced than for vehicle systems and operations.

Exploring Instructors' Technology Readiness, Attitudes and Behavioral Intentions towards E-Learning Technologies in Egypt and United Arab Emirates

ERIC Educational Resources Information Center

El Alfy, Shahira; Gómez, Jorge Marx; Ivanov, Danail

2017-01-01

This paper explores the association between technology readiness, (a meta-construct consisting of optimism, innovativeness, discomfort, and insecurity), attitude, and behavioral intention towards e-learning technologies adoption within an education institution context. The empirical study data is collected at two private universities located in…

Overview of Heatshield for Extreme Entry Environment Technology (HEEET)

NASA Technical Reports Server (NTRS)

Driver, David M.; Ellerby, Donald T.; Gasch, Matthew J.; Mahzari, Milad; Milos, Frank S.; Nishioka, Owen S.; Stackpoole, Margaret M.; Venkatapathy, Ethiraj; Young, Zion W.; Gage, Peter J.;

Social service robots to support independent living : Experiences from a field trial.

PubMed

Pripfl, J; Körtner, T; Batko-Klein, D; Hebesberger, D; Weninger, M; Gisinger, C

2016-06-01

Assistive robots could be a future means to support independent living for seniors. This article provides insights into the latest developments in social service robots (SSR) based on the recently finished HOBBIT project. The idea of the HOBBIT project was to develop a low-cost SSR which is able to reduce the risk of falling, to detect falls and handle emergencies in private homes. The main objective of the project was to raise the technology to a level that allows the robot to be fully autonomously deployed in the private homes of older users and to evaluate technology market readiness, utility, usability and affordability under real-world conditions. During the initial phase of the project, a first prototype (PT1) was developed. The results of laboratory tests with PT1 were used for the development of a second prototype (PT2), which was finally tested in seven households of senior adults (mean age 79 years) for 3 weeks each, i.e. in total more than 5 months. The results showed that PT2 is intuitive to handle and that the functions offered meet the needs of older users; however, the robot was considered more as a toy than a supportive device for independent living. Furthermore, despite an emergency function of the robot, perceived security did not increase. Reasons for this might be a lack of technological robustness and slow performance of the prototype and also the good health conditions of the users; however, users believed that a market-ready version of the robot would be vital for supporting people who are more fragile and more socially isolated. Thus, SSRs have the potential to support independent living of older people although the technology has to be considerably improved to reach market readiness.

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE Global Research (prime contractor) wasmore » awarded a contract from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE Global Research, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on ASPEN Plus process modeling, has an estimated process efficiency of 6% higher than IGCC with conventional CO{sub 2} separation. The current R&D program will determine the feasibility of the integrated UFP technology through pilot-scale testing, and will investigate operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates experimental testing, modeling and economic studies to demonstrate the UFP technology. This is the thirteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL under Contract No. DE-FC26-00FT40974. This report summarizes program accomplishments for the period starting October 1, 2003 and ending December 31, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale assembly, pilot-scale demonstration and program management and technology transfer.« less

A Conceptual Measurement Model for eHealth Readiness: a Team Based Perspective

PubMed Central

Phillips, James; Poon, Simon K.; Yu, Dan; Lam, Mary; Hines, Monique; Brunner, Melissa; Power, Emma; Keep, Melanie; Shaw, Tim; Togher, Leanne

2017-01-01

Despite the shift towards collaborative healthcare and the increase in the use of eHealth technologies, there does not currently exist a model for the measurement of eHealth readiness in interdisciplinary healthcare teams. This research aims to address this gap in the literature through the development of a three phase methodology incorporating qualitative and quantitative methods. We propose a conceptual measurement model consisting of operationalized themes affecting readiness across four factors: (i) Organizational Capabilities, (ii) Team Capabilities, (iii) Patient Capabilities, and (iv) Technology Capabilities. The creation of this model will allow for the measurement of the readiness of interdisciplinary healthcare teams to use eHealth technologies to improve patient outcomes. PMID:29854207

Scotty, I Need More Power - The Fission System Gateway to Abundant Power for Exploration

NASA Technical Reports Server (NTRS)

Palac, Donald T.

2011-01-01

In planning and in crisis, electrical power has been a key consideration when humans venture into space. Since the 1950's, nuclear fission (splitting of atoms) power has been a logical alternative in both fact and fiction, due to its ability to provide abundant power with high energy density, reliability, and immunity to severe environments. Bringing space fission power to a state of readiness for exploration has depended on clearing the hurdle of technology readiness demonstration. Due to the happy coincidence of heritage from prior space fission development efforts such as the Prometheus program, foresight from NASA's Exploration Mission Systems Directorate in the mid-2000's, and relative budget stability through the late 2000's, National Aeronautics and Space Administration (NASA) and Department of Energy (DOE), with their industry partners, are poised to push through to this objective. Hardware for a 12 kWe non-nuclear Fission Power System Technology Demonstration Unit is being fabricated now on a schedule that will enable a low-cost demonstration of technology readiness in the mid-2010s, with testing beginning as early as 2012. With space fission power system technology demonstrated, exploration mission planners will have the flexibility to respond to a broad variety of missions and will be able to provide abundant power so that future explorers will, in planning or crisis, have the power they need when they most need it.

A Proposed Conceptual Model of Military Medical Readiness

DTIC Science & Technology

2007-05-01

critical role in complex military operations in which Medical Readiness 22 technological and information demands necessitate a multi-operator environment...Analysis 33 Coding 34 Data Collection 35 Medical Readiness 6 Boundaries 36 Researcher’s Role and Approach 37 Literature Review 37 The Military Health...Within the external environment, strategic shifts, technological advancements, and changing demographics affect how the Military Health System delivers

Sensor Measurement Strategies for Monitoring Offshore Wind and Wave Energy Devices

NASA Astrophysics Data System (ADS)

O'Donnell, Deirdre; Srbinovsky, Bruno; Murphy, Jimmy; Popovici, Emanuel; Pakrashi, Vikram

2015-07-01

While the potential of offshore wind and wave energy devices is well established and accepted, operations and maintenance issues are still not very well researched or understood. In this regard, scaled model testing has gained popularity over time for such devices at various technological readiness levels. The dynamic response of these devices are typically measured by different instruments during such scaled tests but agreed sensor choice, measurement and placement guidelines are still not in place. This paper compared the dynamic responses of some of these sensors from a scaled ocean wave testing to highlight the importance of sensor measurement strategies. The possibility of using multiple, cheaper sensors of seemingly inferior performance as opposed to the deployment of a small number of expensive and accurate sensors are also explored. An energy aware adaptive sampling theory is applied to highlight the possibility of more efficient computing when large volumes of data are available from the tested structures. Efficient sensor measurement strategies are expected to have a positive impact on the development of an device at different technological readiness levels while it is expected to be helpful in reducing operation and maintenance costs if such an approach is considered for the devices when they are in operation.

Are postgraduate students in distance medical education program ready for e-learning? A survey in Iran

PubMed Central

Changiz, Tahereh; Haghani, Fariba; Nowroozi, Nasim

2013-01-01

Introduction: Appropriate instructional design plays a crucial role in e-learning success, and analyzing learners is the cornerstone for instructional design process. Students’ readiness for e-learning was assessed in the present study as an example of learner analysis for a distance course in medical education master program. Materials and Methods: A census sample of 23 students applied for distance master program on medical education, completed the “Students’ E-Learning Readiness Scale” developed by Watkins, via email. The reliability and validity of the scale has been confirmed before. Average scores in total and 6 subscales were calculated. The score range was 1-5 and scores above 3 indicated good readiness. Data was interpreted using descriptive and non-parametric tests (Mann-Whitney U and Kruskal-Wallis). Results: Response rate was 100%. The students’ readiness scores in total and all subscales (“technology access”, “online skills and relationships”, “motivation”, “online audio/video”, “readiness for online discussions”, and “importance of e-learning to your success”) were above 3. Comparing different subscales, students’ mean scores in “motivation” and “internet discussion” subscales were less than others, although the difference was not significant. There were no significant gender differences in the readiness scores. Students who were academic staff had significantly higher scores than others in total and in “motivation” and “online skills and relationship” subscales. Conclusion: Good learners’ readiness, observed in the present study, may imply that the instructional designer can rely on e-learning strategies and build the course upon them. However, according to the slightly lower scores in “motivation” and “online discussion” subscales, it is recommended to stress more on strategies that improve these two components. To generalize the results, it is needed to test students’ readiness in more different degree programs. PMID:24524090

Technology readiness assessments: A retrospective

NASA Astrophysics Data System (ADS)

Mankins, John C.

2009-11-01

The development of new system capabilities typically depends upon the prior success of advanced technology research and development efforts. These systems developments inevitably face the three major challenges of any project: performance, schedule and budget. Done well, advanced technology programs can substantially reduce the uncertainty in all three of these dimensions of project management. Done poorly, or not at all, and new system developments suffer from cost overruns, schedule delays and the steady erosion of initial performance objectives. It is often critical for senior management to be able to determine which of these two paths is more likely—and to respond accordingly. The challenge for system and technology managers is to be able to make clear, well-documented assessments of technology readiness and risks, and to do so at key points in the life cycle of the program. In the mid 1970s, the National Aeronautics and Space Administration (NASA) introduced the concept of "technology readiness levels" (TRLs) as a discipline-independent, programmatic figure of merit (FOM) to allow more effective assessment of, and communication regarding the maturity of new technologies. In 1995, the TRL scale was further strengthened by the articulation of the first definitions of each level, along with examples (J. Mankins, Technology readiness levels, A White Paper, NASA, Washington, DC, 1995. [1]). Since then, TRLs have been embraced by the U.S. Congress' General Accountability Office (GAO), adopted by the U.S. Department of Defense (DOD), and are being considered for use by numerous other organizations. Overall, the TRLs have proved to be highly effective in communicating the status of new technologies among sometimes diverse organizations. This paper will review the concept of "technology readiness assessments", and provide a retrospective on the history of "TRLs" during the past 30 years. The paper will conclude with observations concerning prospective future directions for the important discipline of technology readiness assessments.

Forward Technology Solar Cell Experiment (FTSCE) for MISSE-5 Verified and Readied for Flight on STS-114

NASA Technical Reports Server (NTRS)

Jenkins, Phillip P.; Krasowski, Michael J.; Greer, Lawrence C.; Flatico, Joseph M.

2005-01-01

The Forward Technology Solar Cell Experiment (FTSCE) is a space solar cell experiment built as part of the Fifth Materials on the International Space Station Experiment (MISSE-5): Data Acquisition and Control Hardware and Software. It represents a collaborative effort between the NASA Glenn Research Center, the Naval Research Laboratory, and the U.S. Naval Academy. The purpose of this experiment is to place current and future solar cell technologies on orbit where they will be characterized and validated. This is in response to recent on-orbit and ground test results that raised concerns about the in-space survivability of new solar cell technologies and about current ground test methodology. The various components of the FTSCE are assembled into a passive experiment container--a 2- by 2- by 4-in. folding metal container that will be attached by an astronaut to the outer structure of the International Space Station. Data collected by the FTSCE will be relayed to the ground through a transmitter assembled by the U.S. Naval Academy. Data-acquisition electronics and software were designed to be tolerant of the thermal and radiation effects expected on orbit. The experiment has been verified and readied for flight on STS-114.

Production technology readiness assessment of surfactant in the research center for Chemistry-Indonesian Institute of Sciences

NASA Astrophysics Data System (ADS)

Setiawan, Arief Ameir Rahman; Sulaswatty, Anny

2017-11-01

The common problem faced by the institution working on research, innovation and technology development is lack of quantitative measures to determine the technology readiness of research. No common communication language between R & D Institutions and industry about the level of preparedness of a research resulting a barrier to technology diffusion interaction. This lack of connection between R & D institutes with industry may lead to "sluggishness" occurs in innovating. For such circumstance, assessing technology readiness of research is very important. One of wide spread methods for the assessment is Technology Readiness Level (TRL, also known as Technometer), which is introduced by NASA (National Aeronautics and Space Administration). TRL is a general guide that provides an overview of maturity level of a technology. This study aims to identify and demonstrate the implementation of TRL to assess a number of surfactant researches in the Research Center for Chemistry, Indonesian Institute of Sciences. According to the assessment, it has been obtained the surfactant recommended for further development towards commercialization of R & D results, i.e. Glycerol Mono Stearate (GMS), which has reached the level of TRL 7.

The NASA-Lewis/ERDA solar heating and cooling technology program. [project planning/energy policy

NASA Technical Reports Server (NTRS)

Couch, J. P.; Bloomfield, H. S.

1975-01-01

Plans by NASA to carry out a major role in a solar heating and cooling program are presented. This role would be to create and test the enabling technology for future solar heating, cooling, and combined heating/cooling systems. The major objectives of the project are to achieve reduction in solar energy system costs, while maintaining adequate performance, reliability, life, and maintenance characteristics. The project approach is discussed, and will be accomplished principally by contract with industry to develop advanced components and subsystems. Advanced hardware will be tested to establish 'technology readiness' both under controlled laboratory conditions and under real sun conditions.

Solid Polymer Electrolyte Fuel Cell Technology Program

NASA Technical Reports Server (NTRS)

1980-01-01

Work is reported on phase 5 of the Solid Polymer Electrolyte (SPE) Fuel Cell Technology Development program. The SPE fuel cell life and performance was established at temperatures, pressures, and current densities significantly higher than those previously demonstrated in sub-scale hardware. Operation of single-cell Buildup No. 1 to establish life capabilities of the full-scale hardware was continued. A multi-cell full-scale unit (Buildup No. 2) was designed, fabricated, and test evaluated laying the groundwork for the construction of a reactor stack. A reactor stack was then designed, fabricated, and successfully test-evaluated to demonstrate the readiness of SPE fuel cell technology for future space applications.

Space station propulsion test bed

NASA Technical Reports Server (NTRS)

Briley, G. L.; Evans, S. A.

1989-01-01

A test bed was fabricated to demonstrate hydrogen/oxygen propulsion technology readiness for the intital operating configuration (IOC) space station application. The test bed propulsion module and computer control system were delivered in December 1985, but activation was delayed until mid-1986 while the propulsion system baseline for the station was reexamined. A new baseline was selected with hydrogen/oxygen thruster modules supplied with gas produced by electrolysis of waste water from the space shuttle and space station. As a result, an electrolysis module was designed, fabricated, and added to the test bed to provide an end-to-end simulation of the baseline system. Subsequent testing of the test bed propulsion and electrolysis modules provided an end-to-end demonstration of the complete space station propulsion system, including thruster hot firings using the oxygen and hydrogen generated from electrolysis of water. Complete autonomous control and operation of all test bed components by the microprocessor control system designed and delivered during the program was demonstrated. The technical readiness of the system is now firmly established.

Are You Ready for Knowledge Sharing? An Empirical Study of Virtual Communities

ERIC Educational Resources Information Center

Hung, Shiu-Wan; Cheng, Min-Jhih

2013-01-01

This study aimed to explore the relationship between knowledge sharing intentions and the perceptions of individual technology users who are members of virtual communities. We characterized learners' perceptions of new technological products or services by including both an individual's psychological state of readiness to accept technology and…

E-learning readiness from perspectives of medical students: A survey in Nigeria.

PubMed

Obi, I E; Charles-Okoli, A N; Agunwa, C C; Omotowo, B I; Ndu, A C; Agwu-Umahi, O R

2018-03-01

Learning in the medical school of the study university is still by the traditional face-to-face approach with minimal e-communication. This paper assesses student's perspectives of E-learning readiness, its predictors and presents a model for assessing them. A descriptive cross-sectional study of medical students. By proportional quota sampling 284 students responded to a semi-structured self-administered questionnaire adapted from literature. Ethical issues were given full consideration. Analysis was with SPSS version 20, using descriptive statistics, ANOVA, Spearman's correlation, and multiple regression. Statistical significance was considered at P < 0.05. Medical students are ready for E-learning (Mlr = 3.8 > Melr = 3.4), beyond reliance on the face-to-face approach (69.7%), expecting effective (51.1%), and quality improvement in their learning (73.1%). Having basic information and communications technology skills (68.9%) (Mict = 3.7 > Melr = 3.4), access to laptops (76.1%), ability to use web browsers confidently (91.8%) (Mwb = 4.3 > Melr = 3.4), with only few able to use asynchronous tools (45.5%), they consider content design important to attract users (75.6%), and agree they need training on E-learning content (71.4%). They however do not believe the university has enough information technology infrastructure (62.4%) (Mi = 2.7 < Melr = 3.4) nor sufficient professionals to train them (M = 2.9). Predictors are attitude, content readiness, technological readiness, and culture readiness. The model however only explains 37.1% of readiness in the population. Medical students in this environment are ready to advance to E-learning. Predicted by their attitude, content, technological and cultural readiness. Further study with qualitative methodology will help in preparing for this evolution in learning.

M-Readiness Assessment Model Development and Validation: Investigation of Readiness Index and Factors Affecting Readiness

ERIC Educational Resources Information Center

Bakhsh, Muhammad; Mahmood, Amjad; Sangi, Nazir Ahmed

2018-01-01

It is important for distance learning institutions to be well prepared before designing and implementing any new technology based learning system to justify the investment and minimize failure risk. It can be achieved by systematically assessing the readiness of all stakeholders. This paper first proposes an m-readiness assessment process and…

Validation of the Lollipop Test: A Diagnostic Screening Test of School Readiness.

ERIC Educational Resources Information Center

Chew, Alex L.; Morris, John D.

1984-01-01

The validity of the Lollipop Test: A Diagnostic Screening Test of School Readiness was examined using the Metropolitan Readiness Test (MRT), Level I, Form Q, as the criterion. Appreciable concurrent validity was found across test batteries. Implications for school readiness screening are discussed. (Author/BS)

Integrating technology readiness into the expectation-confirmation model: an empirical study of mobile services.

PubMed

Chen, Shih-Chih; Liu, Ming-Ling; Lin, Chieh-Peng

2013-08-01

The aim of this study was to integrate technology readiness into the expectation-confirmation model (ECM) for explaining individuals' continuance of mobile data service usage. After reviewing the ECM and technology readiness, an integrated model was demonstrated via empirical data. Compared with the original ECM, the findings of this study show that the integrated model may offer an ameliorated way to clarify what factors and how they influence the continuous intention toward mobile services. Finally, the major findings are summarized, and future research directions are suggested.

Development of Inflatable Entry Systems Technologies

NASA Technical Reports Server (NTRS)

Player, Charles J.; Cheatwood, F. McNeil; Corliss, James

2005-01-01

Achieving the objectives of NASA s Vision for Space Exploration will require the development of new technologies, which will in turn require higher fidelity modeling and analysis techniques, and innovative testing capabilities. Development of entry systems technologies can be especially difficult due to the lack of facilities and resources available to test these new technologies in mission relevant environments. This paper discusses the technology development process to bring inflatable aeroshell technology from Technology Readiness Level 2 (TRL-2) to TRL-7. This paper focuses mainly on two projects: Inflatable Reentry Vehicle Experiment (IRVE), and Inflatable Aeroshell and Thermal Protection System Development (IATD). The objectives of IRVE are to conduct an inflatable aeroshell flight test that demonstrates exoatmospheric deployment and inflation, reentry survivability and stability, and predictable drag performance. IATD will continue the development of the technology by conducting exploration specific trade studies and feeding forward those results into three more flight tests. Through an examination of these projects, and other potential projects, this paper discusses some of the risks, issues, and unexpected benefits associated with the development of inflatable entry systems technology.

High Temperature Gas-Cooled Test Reactor Point Design: Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sterbentz, James William; Bayless, Paul David; Nelson, Lee Orville

2016-01-01

A point design has been developed for a 200-MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched uranium oxycarbide fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technology readiness level, licensing approach, and costs of the test reactor point design.

High Temperature Gas-Cooled Test Reactor Point Design: Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sterbentz, James William; Bayless, Paul David; Nelson, Lee Orville

2016-03-01

A point design has been developed for a 200-MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched uranium oxycarbide fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technology readiness level, licensing approach, and costs of the test reactor point design.

FY 2002 Pollution Prevention/Compliance, Acquisition and Technology Division Annual Report

DTIC Science & Technology

2003-03-03

will be better able to preserve readiness, save money and avoid bad decisions by knowing which alternative cleaning products meet its stringent...partnership with commodity managers, USAEC and ATC are leading an initiative to compre- hensively test several cleaning products and gather data the Army

FY 2001 Pollution Prevention/Compliance, Acquisition and Technology Division Annual Report

DTIC Science & Technology

2002-02-15

readiness, save money and avoid bad decisions by knowing which alternative cleaning products meet its stringent requirements for performance, soldier...several cleaning products and gather data the Army and other DoD services can use to make procurement and usage decisions. The current program test

Do Methods Matter in Global Leadership Development? Testing the Global Leadership Development Ecosystem Conceptual Model

ERIC Educational Resources Information Center

Walker, Jennie L.

2018-01-01

As world communication, technology, and trade become increasingly integrated through globalization, multinational corporations seek employees with global leadership skills. However, the demand for these skills currently outweighs the supply. Given the rarity of globally ready leaders, global competency development should be emphasized in business…

High-Temperature Gas-Cooled Test Reactor Point Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sterbentz, James William; Bayless, Paul David; Nelson, Lee Orville

2016-04-01

A point design has been developed for a 200 MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched UCO fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technological readiness level, licensing approach and costs.

Influence of Transformational Leadership Style on Decision-Making Style and Technology Readiness: A Correlation Study

ERIC Educational Resources Information Center

Mueller, Crystal A.

2009-01-01

The research addressed the problem of technology initiatives failing to meet organizational objectives. The purpose of the quantitative correlation study was to determine the relationship between transformational leadership styles, decision-making styles, and technology readiness. The findings of the study answered research questions in three…

Assessing the relationship between technology readiness and continuance intention in an E-appointment system: relationship quality as a mediator.

PubMed

Chen, Shih-Chih; Jong, Din; Lai, Min-Tsai

2014-09-01

Numerous types of self-service technologies have prevailed due to innovations in network and information technology. To hospitals, patient intentions to continue to use the e-appointment system are crucial. Previous investigations discussed only the relationships between the technology readiness of users and their continuance intentions, and ignored the most important mediator, relationship quality. This study explored the relationships among technology readiness, relationship quality, and continuance intention. The research results demonstrated that both optimism and innovativeness significantly and positively influenced continuance intention through the mediating effect of relationship quality. However, discomfort and insecurity hid not significantly influence relationship quality or continuance intention. Finally, theoretical contributions, managerial implications and future research directions were discussed.

Progress in the Development of Direct Osmotic Concentration Wastewater Recovery Process for Advanced Life Support Systems

NASA Technical Reports Server (NTRS)

Cath, Tzahi Y.; Adams, Dean V.; Childress, Amy; Gormly, Sherwin; Flynn, Michael

2005-01-01

Direct osmotic concentration (DOC) has been identified as a high potential technology for recycling of wastewater to drinking water in advanced life support (ALS) systems. As a result the DOC process has been selected for a NASA Rapid Technology Development Team (RTDT) effort. The existing prototype system has been developed to a Technology Readiness Level (TRL) 3. The current project focuses on advancing the development of this technology from TRL 3 to TRL 6 (appropriate for human rated testing). A new prototype of a DOC system is been designed and fabricated that addresses the deficiencies encountered during the testing of the original system and allowing the new prototype to achieve TRL 6. Background information is provided about the technologies investigated and their capabilities, results from preliminary tests, and the milestones plan and activities for the RTDT program intended to develop a second generation prototype of the DOC system.

The NASA-Lewis/ERDA Solar Heating and Cooling Technology Program

NASA Technical Reports Server (NTRS)

Couch, J. P.; Bloomfield, H. S.

1975-01-01

The NASA Lewis Research Center plans to carry out a major role in the ERDA Solar Heating and Cooling Program. This role would be to create and test the enabling technology for future solar heating, cooling, and combined heating/cooling systems. The major objectives of the project are to achieve reduction in solar energy system costs, while maintaining adequate performance, reliability, life, and maintenance characteristics. The project approach is to move progressively through component, subsystem, and then system technology advancement phases in parallel with continuing manufacturing cost assessment studies. This approach will be accomplished principally by contract with industry to develop advanced components and subsystems. This advanced hardware will be tested to establish 'technology readiness' both under controlled laboratory conditions and under real sun conditions.

Development of a transportation real-time technology readiness framework.

DOT National Transportation Integrated Search

2017-03-01

The purpose of this study was to develop a proof-of-concept carrier technology readiness framework. While substantial investment has been made into the Iowa Department of Transportation (DOT) Traffic Operations Center, scant attention has been paid t...

NASA Project Develops Next-Generation Low-Emissions Combustor Technologies

NASA Technical Reports Server (NTRS)

Lee, Chi-Ming; Chang, Clarence T.; Herbon, John T.; Kramer, Stephen K.

2013-01-01

NASA's Environmentally Responsible Aviation (ERA) Project is working with industry to develop the fuel flexible combustor technologies for a new generation of low-emissions engine targeted for the 2020 timeframe. These new combustors will reduce nitrogen oxide (NOx) emissions to half of current state-of-the-art (SOA) combustors, while simultaneously reducing noise and fuel burn. The purpose of the low NOx fuel-flexible combustor research is to advance the Technology Readiness Level (TRL) and Integration Readiness Level (IRL) of a low NOx, fuel flexible combustor to the point where it can be integrated in the next generation of aircraft. To reduce project risk and optimize research benefit NASA chose to found two Phase 1 contracts. The first Phase 1 contracts went to engine manufactures and were awarded to: General Electric Company, and Pratt & Whitney Company. The second Phase 1 contracts went to fuel injector manufactures Goodrich Corporation, Parker Hannifin Corporation, and Woodward Fuel System Technology. In 2012, two sector combustors were tested at NASA's ASCR. The results indicated 75% NOx emission reduction below the 2004 CAEP/6 regulation level.

Ion Propulsion Development Projects in US: Space Electric Rocket Test I to Deep Space 1

NASA Technical Reports Server (NTRS)

Sovey, James S.; Rawlin, Vincent K.; Patterson, Michael J.

2001-01-01

The historical background and characteristics of the experimental flights of ion propulsion systems and the major ground-based technology demonstrations are reviewed. The results of the first successful ion engine flight in 1964, Space Electric Rocket Test (SERT) I, which demonstrated ion beam neutralization, are discussed along with the extended operation of SERT II starting in 1970. These results together with the technologies employed on the early cesium engine flights, the applications technology satellite series, and the ground-test demonstrations, have provided the evolutionary path for the development of xenon ion thruster component technologies, control systems, and power circuit implementations. In the 1997-1999 period, the communication satellite flights using ion engine systems and the Deep Space 1 flight confirmed that these auxiliary and primary propulsion systems have advanced to a high level of flight readiness.

Design, Construction, and Testing of Lightweight X-ray Mirror Modules

NASA Technical Reports Server (NTRS)

McClelland, Ryan S.; Biskach, Michael P.; Chan, Kai-Wing; Espina, Rebecca A.; Hohl, Bruce R.; Matson, Elizabeth A.; Saha, Timo C.; Zhang, William W.

2013-01-01

Lightweight and high resolution optics are needed for future space-based X-ray telescopes to achieve advances in high-energy astrophysics. The Next Generation X-ray Optics (NGXO) team at NASA GSFC is nearing mission readiness for a 10 arc-second Half Power Diameter (HPD) slumped glass mirror technology while laying the groundwork for a future 1-2 arc-second technology based on polished silicon mirrors. Technology Development Modules (TDMs) have been designed, fabricated, integrated with mirrors segments, and extensively tested to demonstrate technology readiness. Tests include X-ray performance, thermal vacuum, acoustic load, and random vibration. The thermal vacuum and acoustic load environments have proven relatively benign, while the random vibration environment has proven challenging due to large input amplification at frequencies above 500 Hz. Epoxy selection, surface preparation, and larger bond area have increased bond strength while vibration isolation has decreased vibration amplification allowing for space launch requirements to be met in the near term. The next generation of TDMs, which demonstrates a lightweight structure supporting more mirror segments, is currently being fabricated. Analysis predicts superior performance characteristics due to the use of E-60 Beryllium-Oxide Metal Matrix Composite material, with only a modest cost increase. These TDMs will be larger, lighter, stiffer, and stronger than the current generation. Preliminary steps are being taken to enable mounting and testing of 1-2 arc-second mirror segments expected to be available in the future. A Vertical X-ray Test Facility (VXTF) will minimize module gravity distortion and allow for less constrained mirror mounts, such as fully kinematic mounts. Permanent kinematic mounting into a modified TDM has been demonstrated to achieve 2 arc-second level distortion free alignment.

Test plan. GCPS task 7, subtask 7.1: IHM development

NASA Technical Reports Server (NTRS)

Greenberg, H. S.

1994-01-01

The overall objective of Task 7 is to identify cost-effective life cycle integrated health management (IHM) approaches for a reusable launch vehicle's primary structure. Acceptable IHM approaches must: eliminate and accommodate faults through robust designs, identify optimum inspection/maintenance periods, automate ground and on-board test and check-out, and accommodate and detect structural faults by providing wide and localized area sensor and test coverage as required. These requirements are elements of our targeted primary structure low cost operations approach using airline-like maintenance by exception philosophies. This development plan will follow an evolutionary path paving the way to the ultimate development of flight-quality production, operations, and vehicle systems. This effort will be focused on maturing the recommended sensor technologies required for localized and wide area health monitoring to a technology readiness level (TRL) of 6 and to establish flight ready system design requirements. The following is a brief list of IHM program objectives: design out faults by analyzing material properties, structural geometry, and load and environment variables and identify failure modes and damage tolerance requirements; design in system robustness while meeting performance objectives (weight limitations) of the reusable launch vehicle primary structure; establish structural integrity margins to preclude the need for test and checkout and predict optimum inspection/maintenance periods through life prediction analysis; identify optimum fault protection system concept definitions combining system robustness and integrity margins established above with cost effective health monitoring technologies; and use coupons, panels, and integrated full scale primary structure test articles to identify, evaluate, and characterize the preferred NDE/NDI/IHM sensor technologies that will be a part of the fault protection system.

Current methods for assessing safety of genetically modified crops as exemplified by data on Roundup Ready soybeans.

PubMed

Nair, Rashmi S; Fuchs, Roy L; Schuette, Sheila A

2002-01-01

Several laboratories have used recombinant DNA technology in plant breeding to improve compositional, processing, and agronomic characteristics of plants. These transformed plants have been extensively tested in field trials, have gained full regulatory approvals and are currently being marketed in a number of countries around the world. This paper briefly summarizes the approach used to assure the safety of foods and feeds derived from these genetically modified crops, as exemplified by data on Roundup Ready soybeans that has been developed by Monsanto Company using biotechnology in order to confer tolerance to glyphosate, the active ingredient in Roundup herbicide, by the production of the CP4 enolpyruvylshikimate-3-phosphate synthase protein. The results of the studies demonstrate that Roundup Ready soybeans are as safe as traditional soybeans with respect to food and feed safety.

Predictors of Osteopathic Medical Students' Readiness to Use Health Information Technology.

PubMed

Jacobs, Robin J; Iqbal, Hassan; Rana, Arif M; Rana, Zaid; Kane, Michael N

2017-12-01

The advent of health information technology (HIT) tools can affect the practice of modern medicine in many ways, ideally by improving quality of care and efficiency and reducing medical errors. Future physicians will play a key role in the successful implementation of HIT. However, osteopathic medical students' willingness to learn, adopt, and use technology in a health care setting is not well understood. To understand osteopathic medical students' knowledge, attitudes, and behaviors regarding HIT and to identify factors that may be related to their readiness to use HIT. Using a cross-sectional approach, quantitative surveys were collected from students attending a large osteopathic medical school. Multivariate regression modeling was used to determine whether knowledge, attitudes, behaviors, and personal characteristics were associated with students' readiness to use HIT in future clinical practice. Six hundred four students responded to at least 70% of the survey and were included in the analysis. Multivariate modeling successfully explained the 26% of variance in predicting students' readiness to use HIT (F8,506=22.6, P<.001, R2=0.263). Greater self-efficacy, openness to change (in academic/work settings), favorable attitudes toward HIT use, mobile technology use, younger age, being male, and prior exposure to technology were associated with readiness to use HIT. Understanding students' level of HIT readiness may help guide medical education intervention efforts to better prepare future osteopathic physicians for HIT engagement and use. Innovative approaches to HIT education in medical school curricula that include biomedical informatics may be necessary.

SCRL-Model for Human Space Flight Operations Enterprise Supply Chain

NASA Technical Reports Server (NTRS)

Tucker, Brian; Paxton, Joseph

2010-01-01

This paper will present a Supply Chain Readiness Level (SCRL) model that can be used to evaluate and configure adaptable and sustainable program and mission supply chains at an enterprise level. It will also show that using SCRL in conjunction with Technology Readiness Levels (TRLs), Manufacturing Readiness Levels (MRLs) and National Aeronautics Space Administrations (NASA s) Project Lifecycle Process will provide a more complete means of developing and evaluating a robust sustainable supply chain that encompasses the entire product, system and mission lifecycle. In addition, it will be shown that by implementing the SCRL model, NASA can additionally define supplier requirements to enable effective supply chain management (SCM). Developing and evaluating overall supply chain readiness for any product, system and mission lifecycle is critical for mission success. Readiness levels are presently being used to evaluate the maturity of technology and manufacturing capability during development and deployment phases of products and systems. For example, TRLs are used to support the assessment of the maturity of a particular technology and compare maturity of different types of technologies. MRLs are designed to assess the maturity and risk of a given technology from a manufacturing perspective. In addition, when these measurement systems are used collectively they can offer a more comprehensive view of the maturity of the system. While some aspects of the supply chain and supply chain planning are considered in these familiar metric systems, certain characteristics of an effective supply chain, when evaluated in more detail, will provide an improved insight into the readiness and risk throughout the supply chain. Therefore, a system that concentrates particularly on supply chain attributes is required to better assess enterprise supply chain readiness.

Technological assessment of local manufacturers for wind turbine blade manufacturing in Pakistan

NASA Astrophysics Data System (ADS)

Mahmood, Khurram; Haroon, General

2012-11-01

Composite materials manufacturing industry is one of the world's hi-tech industry. Manufacturing of wind turbine blades is one of the specialized fields requiring high degree of precision and composite manufacturing techniques. This paper identifies the industries specializing in the composite manufacturing and is able to manufacture wind turbines blades in Pakistan. In the second phase, their technology readiness level is determined, based on some factors and then a readiness level are assigned to them. The assigned technology readiness level will depict the absorptive capacity of each manufacturing unit and its capability to take on such projects. The individual readiness level of manufacturing unit will then be used to establish combined technology readiness level of Pakistan particularly for wind turbine blades manufacturing. The composite manufacturing industry provides many spin offs and a diverse range of products can be manufactured using this facility. This research will be helpful to categorize the strong points and flaws of local industry for the gap analysis. It can also be used as a prerequisite study before the evaluation of technologies and specialties to improve the industry of the country for the most favorable results. This will form a basic data base which can be used for the decision making related to transfer of technology, training of local skilled workers and general up-gradation of the local manufacturing units.

Technology Readiness, Internet Self-Efficacy and Computing Experience of Professional Accounting Students

ERIC Educational Resources Information Center

Lai, Ming-Ling

2008-01-01

Purpose: This study aims to assess the state of technology readiness of professional accounting students in Malaysia, to examine their level of internet self-efficacy, to assess their prior computing experience, and to explore if they are satisfied with the professional course that they are pursuing in improving their technology skills.…

Teaching via Mobile Phone: A Case Study on Malaysian Teachers' Technology Acceptance and Readiness

ERIC Educational Resources Information Center

Ismail, Issham; Bokhare, Siti F.; Azizan, Siti N.; Azman, Nizuwan

2013-01-01

The purpose of this study is to identify the level of technology acceptance among school teachers from the components of awareness and motivation, training and courses, training design, and supports and facilities. This study also aims to investigate whether teachers' acceptance of technology could influence their readiness for the pedagogical use…

Rapid Maturation of Edge Sensor Technology and Potential Application in Large Space Telescopes with Segmented Primary Mirrors

NASA Technical Reports Server (NTRS)

Montgomery, Edward E., IV; Smith, W. Scott (Technical Monitor)

2002-01-01

This paper explores the history and results of the last two year's efforts to transition inductive edge sensor technology from Technology Readiness Level 2 to Technology Readiness Level 6. Both technical and programmatic challenges were overcome in the design, fabrication, test, and installation of over a thousand sensors making up the Segment Alignment Maintenance System (SAMs) for the 91 segment, 9.2-meter. Hobby Eberly Telescope (HET). The integration of these sensors with the control system will be discussed along with serendipitous leverage they provided for both initialization alignment and operational maintenance. The experience gained important insights into the fundamental motion mechanics of large segmented mirrors, the relative importance of the variance sources of misalignment errors, the efficient conduct of a program to mature the technology to the higher levels. Unanticipated factors required the team to develop new implementation strategies for the edge sensor information which enabled major segmented mirror controller design simplifications. The resulting increase in the science efficiency of HET will be shown. Finally, the on-going effort to complete the maturation of inductive edge sensor by delivering space qualified versions for future IR (infrared radiation) space telescopes.

NASA Electronic Parts and Packaging Program

NASA Technical Reports Server (NTRS)

Kayali, Sammy

2000-01-01

NEPP program objectives are to: (1) Access the reliability of newly available electronic parts and packaging technologies for usage on NASA projects through validations, assessments, and characterizations, and the development of test methods/tools; (2)Expedite infusion paths for advanced (emerging) electronic parts and packaging technologies by evaluations of readiness for manufacturability and project usage consideration; (3) Provide NASA projects with technology selection, application, and validation guidelines for electronic parts and packaging hardware and processes; nd (4) Retain and disseminate electronic parts and packaging quality assurance, reliability validations, tools, and availability information to the NASA community.

Support to NASA's Advanced Space Technology Program

NASA Technical Reports Server (NTRS)

Goetz, Otto; Thomas, John; Lee, Thomas J.

2000-01-01

During the period of May through September 2000, Lee & Associates, LLC completed the following tasks as specified in the purchase order SOW: Assessment of current processes and structure and recommended improvements; Reviewed and commented on restructure options; Participated in closure of the Fastrac Delta Critical Design Review actions; Participated in the Fastrac Test readiness review (TRR) process for test planned at SSC and Rocketdyne; and Participated in the investigation of any anomalies identified during the Fastrac engine test data reviews.

COBALT: Development of a Platform to Flight Test Lander GN&C Technologies on Suborbital Rockets

NASA Technical Reports Server (NTRS)

Carson, John M., III; Seubert, Carl R.; Amzajerdian, Farzin; Bergh, Chuck; Kourchians, Ara; Restrepo, Carolina I.; Villapando, Carlos Y.; O'Neal, Travis V.; Robertson, Edward A.; Pierrottet, Diego;

Preparing Global-Ready Teachers

ERIC Educational Resources Information Center

Larson, Lotta; Brown, Jennifer S.

2017-01-01

To produce global-ready students who can thrive and compete in an interconnected world, we must prepare global-ready teachers. This article shares how one teacher preparation program focuses on literacy, technology, and globalization, while offering relevant K-12 applications.

The Development of Model for Measuring Railway Wheels Manufacturing Readiness Level

NASA Astrophysics Data System (ADS)

Inrawan Wiratmadja, Iwan; Mufid, Anas

2016-02-01

In an effort to grow the railway wheel industry in Indonesia and reduce the dependence on imports, Metal Industries Development Center (MIDC) makes the implementation of the railway wheel manufacturing technology in Indonesia. MIDC is an institution based on research and development having a task to research the production of railway wheels prototype and acts as a supervisor to the industry in Indonesia, for implementing the railway wheel manufacturing technology. The process of implementing manufacturing technology requires a lot of resources. Therefore it is necessary to measure the manufacturing readiness process. Measurement of railway wheels manufacturing readiness was in this study done using the manufacturing readiness level (MRL) model from the United States Department of Defense. MRL consists of 10 manufacturing readiness levels described by 90 criteria and 184 sub-criteria. To get a manufacturing readiness measurement instrument that is good and accurate, the development process involved experts through expert judgment method and validated with a content validity ratio (CVR). Measurement instrument developed in this study consist of 448 indicators. The measurement results show that MIDC's railway wheels manufacturing readiness is at the level 4. This shows that there is a gap between the current level of manufacturing readiness owned by MIDC and manufacturing readiness levels required to achieve the program objectives, which is level 5. To achieve the program objectives at level 5, a number of actions were required to be done by MIDC. Indicators that must be improved to be able to achieve level 5 are indicators related to the cost and financing, process capability and control, quality management, workers, and manufacturing management criteria.

Systems Engineering Applied to the Development of a Wave Energy Farm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Bull, Diana L.; Costello, Ronan Patrick

A motivation for undertaking this stakeholder requirements analysis and Systems Engineering exercise is to document the requirements for successful wave energy farms to facilitate better design and better design assessments. A difficulty in wave energy technology development is the absence to date of a verifiable minimum viable product against which the merits of new products might be measured. A consequence of this absence is that technology development progress, technology value, and technology funding have largely been measured, associated with, and driven by technology readiness, measured in technology readiness levels (TRLs). Originating primarily from the space and defense industries, TRLs focusmore » on procedural implementation of technology developments of large and complex engineering projects, where cost is neither mission critical nor a key design driver. The key deficiency with the TRL approach in the context of wave energy conversion is that WEC technology development has been too focused on commercial readiness and not enough on the stakeholder requirements and particularly economic viability required for market entry.« less

Technological changes in the healthcare sector. A method to assess change readiness.

PubMed

Kristensen, M; Nøhr, C

2000-01-01

This paper describes the theory, method and recent results of a study developing methods for assessment of change readiness. The empirical focus is on development and implementation of clinical IT systems in the Danish healthcare sector. To assess change readiness, a questionnaire has been developed. The questionnaire has been tested in a hospital department as a part of a pre analysis related to development and implementation of an IT quality assurance system. The study shows a general positive attitude to the IT system and the organisational changes, related to the implementation and use of the system. It also supplies the project organisation with specific information, useful to the project organisation to continue the essential dialogue with the healthcare professionals during the change process. Furthermore it provides a useful tool for planning the ongoing developing processes. Several other healthcare organisations are at the moment entering the study.

Preliminary Technology Maturation Plan for Immobilization of High-Level Waste in Glass Ceramics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vienna, John D.; Crum, Jarrod V.; Sevigny, Gary J.

2012-09-30

A technology maturation plan (TMP) was developed for immobilization of high-level waste (HLW) raffinate in a glass ceramics waste form using a cold-crucible induction melter (CCIM). The TMP was prepared by the following process: 1) define the reference process and boundaries of the technology being matured, 2) evaluate the technology elements and identify the critical technology elements (CTE), 3) identify the technology readiness level (TRL) of each of the CTE’s using the DOE G 413.3-4, 4) describe the development and demonstration activities required to advance the TRLs to 4 and 6 in order, and 5) prepare a preliminary plan tomore » conduct the development and demonstration. Results of the technology readiness assessment identified five CTE’s and found relatively low TRL’s for each of them: • Mixing, sampling, and analysis of waste slurry and melter feed: TRL-1 • Feeding, melting, and pouring: TRL-1 • Glass ceramic formulation: TRL-1 • Canister cooling and crystallization: TRL-1 • Canister decontamination: TRL-4 Although the TRL’s are low for most of these CTE’s (TRL-1), the effort required to advance them to higher values. The activities required to advance the TRL’s are listed below: • Complete this TMP • Perform a preliminary engineering study • Characterize, estimate, and simulate waste to be treated • Laboratory scale glass ceramic testing • Melter and off-gas testing with simulants • Test the mixing, sampling, and analyses • Canister testing • Decontamination system testing • Issue a requirements document • Issue a risk management document • Complete preliminary design • Integrated pilot testing • Issue a waste compliance plan A preliminary schedule and budget were developed to complete these activities as summarized in the following table (assuming 2012 dollars). TRL Budget Year MSA FMP GCF CCC CD Overall $M 2012 1 1 1 1 4 1 0.3 2013 2 2 1 1 4 1 1.3 2014 2 3 1 1 4 1 1.8 2015 2 3 2 2 4 2 2.6 2016 2 3 2 2 4 2 4.9 2017 2 3 3 2 4 2 9.8 2018 3 3 3 3 4 3 7.9 2019 3 3 3 3 4 3 5.1 2020 3 3 3 3 4 3 14.6 2021 3 3 3 3 4 3 7.3 2022 3 3 3 3 4 3 8.8 2023 4 4 4 4 4 4 9.1 2024 5 5 5 5 5 5 6.9 2025 6 6 6 6 6 6 6.9 CCC = canister cooling and crystallization; FMP = feeding, melting, and pouring; GCF = glass ceramic formulation; MSA = mixing, sampling, and analyses. This TMP is intended to guide the development of the glass ceramics waste form and process to the point where it is ready for industrialization.« less

Effect of an Individual Readiness Assurance Test on a Team Readiness Assurance Test in the Team-Based Learning of Physiology

ERIC Educational Resources Information Center

Gopalan, Chaya; Fox, Dainielle J.; Gaebelein, Claude J.

2013-01-01

We examined whether requiring an individual readiness assurance test (iRAT) before a team readiness assurance test (tRAT) would benefit students in becoming better problem solvers in physiology. It was tested in the form of tRAT scores, the time required to complete the tRAT assignment, and individual performance on the unit examinations. Students…

Pupils' Readiness for Self-Regulated Learning in the Forethought Phase of Exploratory Production

ERIC Educational Resources Information Center

Metsärinne, Mika; Kallio, Manne; Virta, Kalle

2015-01-01

This article discusses pupils' readiness for self-regulation in Exploratory Production in Technology Education. In the forethought phase of Exploratory Production, pupils envision and regulate their technological production activities. Next, in the performance phase, the envisioned goals are tried and implemented through ideating, planning and…

Get Set! E-Ready, ... E-Learn! The E-Readiness of Warehouse Workers

ERIC Educational Resources Information Center

Moolman, Hermanus B.; Blignaut, Seugnet

2008-01-01

Modern organizations use technology to expand across traditional business zones and boundaries to survive the global commercial village. While IT systems allow organizations to maintain a competitive edge, South African unskilled labour performing warehouse operations are frequently retrained to keep abreast with Information Technology.…

NIITEK-NVESD AMDS program and interim field-ready system

NASA Astrophysics Data System (ADS)

Hibbard, Mark W.; Etebari, Ali

2010-04-01

NIITEK (Non-Intrusive Inspection Technology, Inc) develops and fields vehicle-mounted mine and buried threat detection systems. Since 2003, the NIITEK has developed and tested a remote robot-mounted mine detection system for use in the NVESD AMDS program. This paper will discuss the road map of development since the outset of the program, including transition from a data collection platform towards a militarized field-ready system for immediate use as a remote countermine and buried threat detection solution with real-time autonomous threat classification. The detection system payload has been integrated on both the iRobot Packbot and the Foster-Miller Talon robot. This brief will discuss the requirements for a successful near-term system, the progressive development of the system, our current real-time capabilities, and our planned upgrades for moving into and supporting field testing, evaluation, and ongoing operation.

The Development of Solar Sail Propulsion for NASA Science Missions to the Inner Solar System

NASA Technical Reports Server (NTRS)

Montgomery, Edward E, IV; Johnson, Charles Les

2004-01-01

This paper examines recent assessments of the technology challenges facing solar sails, identifies the systems and technologies needing development, and the approach employed by NASA's In-space Propulsion Program in NASA to achieve near term products that move this important technology from low technology readiness level (TRL) toward the goal of application to science missions in near earth space and beyond. The status of on-going efforts to design, build, and test ground demonstrators of alternate approaches to structures (inflatable versus rigid), membrane materials, optical shape sensing, and attitude control will be presented along with planned future investments.

Nuclear Thermal Propulsion Technology - Summary of FY 1991 Interagency Panel Planning

NASA Technical Reports Server (NTRS)

Clark, John S.; Mcdaniel, Patrick; Howe, Steven; Stanley, Marland

1991-01-01

An Interagency (NASA/DOE/DOD) technical panel has been working in 1991 to evaluate nuclear thermal propulsion (NTP) concepts on a consistent basis, and to continue technology development project planning for a joint project in nuclear propulsion for Space Exploration Initiative (SEI). This paper summarizes the efforts of the panel to date and summarizes the technology plans defined for NTP. Concepts were categorized based on probable technology readiness data, and innovative 'proof-of-concept' tests and analyses were defined. While further studies will be required to provide a consistent comparison of all of the NTP concepts, the current status of the studies is presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

To meet the U.S. Navy's energy goals, the National Renewable Energy Laboratory (NREL) and the Naval Facilities Engineering Command (NAVFAC) spent two years collaborating on demonstrations that tested market-ready energy efficiency measures, renewable energy generation, and energy systems integration. One such technology - an energy management system - was identified as a promising method for reducing energy use and costs, and can contribute to increasing energy security.

Delphi`s DETOXSM process: Preparing to treat high organic content hazardous and mixed wastes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robertson, D.T.; Rogers, T.W.; Goldblatt, S.D.

1998-12-31

The US Department of Energy (DOE) Federal Energy Technology Center is sponsoring a full-scale technology demonstration of Delphi Research, Inc.`s patented DETOX{sup SM} catalytic wet chemical oxidation waste treatment process at the Savannah River Site (SRS) in South Carolina. The process is being developed primarily to treat hazardous and mixed wastes within the DOE complex as an alternative to incineration, but it has significant potential to treat wastes in the commercial sector. The results of the demonstration will be intensively studied and used to validate the technology. A critical objective in preparing for the demonstration was the successful completion ofmore » a programmatic Operational Readiness Review. Readiness Reviews are required by DOE for all new process startups. The Readiness Review provided the vehicle to ensure that Delphi was ready to start up and operate the DETOX{sup SM} process in the safest manner possible by implementing industry accepted management practices for safe operation. This paper provides an overview of the DETOX{sup SM} demonstration at SRS, and describes the crucial areas of the Readiness Review that marked the first steps in Delphi`s transition from a technology developer to an operating waste treatment services provider.« less

Technical Feasibility Assessment of Lunar Base Mission Scenarios

NASA Astrophysics Data System (ADS)

Magelssen, Trygve ``Spike''; Sadeh, Eligar

2005-02-01

Investigation of the literature pertaining to lunar base (LB) missions and the technologies required for LB development has revealed an information gap that hinders technical feasibility assessment. This information gap is the absence of technical readiness levels (TRL) (Mankins, 1995) and information pertaining to the criticality of the critical enabling technologies (CETs) that enable mission success. TRL is a means of identifying technical readiness stages of a technology. Criticality is defined as the level of influence the CET has on the mission scenario. The hypothesis of this research study is that technical feasibility is a function of technical readiness and technical readiness is a function of criticality. A newly developed research analysis method is used to identify the technical feasibility of LB mission scenarios. A Delphi is used to ascertain technical readiness levels and CET criticality-to-mission. The research analysis method is applied to the Delphi results to determine the technical feasibility of the LB mission scenarios that include: observatory, science research, lunar settlement, space exploration gateway, space resource utilization, and space tourism. The CETs identified encompasses four major system level technologies of: transportation, life support, structures, and power systems. Results of the technical feasibility assessment show the observatory and science research LB mission scenarios to be more technical ready out of all the scenarios, but all mission scenarios are in very close proximity to each other in regard to criticality and TRL and no one mission scenario stands out as being absolutely more technically ready than any of the other scenarios. What is significant and of value are the Delphi results concerning CET criticality-to-mission and the TRL values evidenced in the Tables that can be used by anyone assessing the technical feasibility of LB missions.

Early Market TRL/MRL Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronnebro, Ewa; Stetson, Ned

he focus of this report is TRL/MRL analysis of hydrogen storage; it documents the methodology and results of an effort to identify hydrogen storage technologies’ technical and manufacturing readiness for early market motive and non-motive applications and to provide a path forward toward commercialization. Motive applications include materials handling equipment (MHE) and ground support equipment (GSE), such as forklifts, tow tractors, and specialty vehicles such as golf carts, lawn mowers and wheel chairs. Non-motive applications are portable, stationary or auxiliary power units (APUs) and include portable laptops, backup power, remote sensor power, and auxiliary power for recreational vehicles, hotels, hospitals,more » etc. Hydrogen storage technologies assessed include metal hydrides, chemical hydrides, sorbents, gaseous storage, and liquid storage. The assessments are based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies at varying levels of development. The manufacturing status could be established from eight risk elements: Technical Maturity, Design, Materials, Cost & Funding, Process Capability, Personnel, Facilities and Manufacturing Planning. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. This technology readiness assessment (TRA) report documents the process used to conduct the TRA/MRA (technology and manufacturing readiness assessment), reports the TRL and MRL for each assessed technology and provides recommendations based on the findings. To investigate the state of the art and needs to mature the technologies, PNNL prepared a questionnaire to assign TRL and MRL for each hydrogen storage technology. The questionnaire was sent to identified hydrogen storage technology developers and manufacturers who were asked to perform a self-assessment. We included both domestic and international organizations including U.S. national laboratories, U.S. companies, European companies and Japanese companies. PNNL collected the data and performed an analysis to deduce the level of maturity and to provide program recommendations.« less

MEMS Deformable Mirror Technology Development for Space-Based Exoplanet Detection

NASA Astrophysics Data System (ADS)

Bierden, Paul; Cornelissen, S.; Ryan, P.

2014-01-01

In the search for earth-like extrasolar planets that has become an important objective for NASA, a critical technology development requirement is to advance deformable mirror (DM) technology. High-actuator-count DMs are critical components for nearly all proposed coronagraph instrument concepts. The science case for exoplanet imaging is strong, and rapid recent advances in test beds with DMs made using microelectromechanical system (MEMS) technology have motivated a number of compelling mission concepts that set technical specifications for their use as wavefront controllers. This research will advance the technology readiness of the MEMS DMs components that are currently at the forefront of the field, and the project will be led by the manufacturer of those components, Boston Micromachines Corporation (BMC). The project aims to demonstrate basic functionality and performance of this key component in critical test environments and in simulated operational environments, while establishing model-based predictions of its performance relative to launch and space environments. Presented will be the current status of the project with modeling and initial test results.

Teaching of students technology early professional orientation of schoolchildren

NASA Astrophysics Data System (ADS)

Gilmanshina, S. I.; Sagitova, R. N.; Gilmanshin, I. R.; Kamaleeva, A. R.

2017-09-01

The necessity of early professional orientation of schoolchildren on the engineering profession and a new type of teacher was proved. Theoretically substantiated and experimentally tested pedagogical conditions of training of students - future teachers of technology early professional orientation of schoolchildren in the system of university preparation of teacher of a new type. This development of courses of special disciplines, aimed at developing of future teachers of readiness for early career guidance activities; development of interactive group projects for schoolchildren of different age groups (including primary school), expanding their understanding of the world of professions; practical testing of career guidance projects dealing with children’s audience.

Assessment of the Technical Maturity of Generation IV Concepts for Test or Demonstration Reactor Applications, Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans David

2015-10-01

The United States Department of Energy (DOE) commissioned a study the suitability of different advanced reactor concepts to support materials irradiations (i.e. a test reactor) or to demonstrate an advanced power plant/fuel cycle concept (demonstration reactor). As part of the study, an assessment of the technical maturity of the individual concepts was undertaken to see which, if any, can support near-term deployment. A Working Group composed of the authors of this document performed the maturity assessment using the Technical Readiness Levels as defined in DOE’s Technology Readiness Guide . One representative design was selected for assessment from of each ofmore » the six Generation-IV reactor types: gas-cooled fast reactor (GFR), lead-cooled fast reactor (LFR), molten salt reactor (MSR), supercritical water-cooled reactor (SCWR), sodium-cooled fast reactor (SFR), and very high temperature reactor (VHTR). Background information was obtained from previous detailed evaluations such as the Generation-IV Roadmap but other technical references were also used including consultations with concept proponents and subject matter experts. Outside of Generation IV activity in which the US is a party, non-U.S. experience or data sources were generally not factored into the evaluations as one cannot assume that this data is easily available or of sufficient quality to be used for licensing a US facility. The Working Group established the scope of the assessment (which systems and subsystems needed to be considered), adapted a specific technology readiness scale, and scored each system through discussions designed to achieve internal consistency across concepts. In general, the Working Group sought to determine which of the reactor options have sufficient maturity to serve either the test or demonstration reactor missions.« less

ACEE composite structures technology

NASA Technical Reports Server (NTRS)

Klotzsche, M. (Compiler)

1984-01-01

The NASA Aircraft Energy Efficiency (ACEE) Composite Primary Aircraft Structures Program has made significant progress in the development of technology for advanced composites in commercial aircraft. Commercial airframe manufacturers have demonstrated technology readiness and cost effectiveness of advanced composites for secondary and medium primary components and have initiated a concerted program to develop the data base required for efficient application to safety-of-flight wing and fuselage structures. Oral presentations were compiled into five papers. Topics addressed include: damage tolerance and failsafe testing of composite vertical stabilizer; optimization of composite multi-row bolted joints; large wing joint demonstation components; and joints and cutouts in fuselage structure.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kobos, Peter Holmes; Malczynski, Leonard A.; Walker, La Tonya Nicole

People save for retirement throughout their career because it is virtually impossible to save all you’ll need in retirement the year before you retire. Similarly, without installing incremental amounts of clean fossil, renewable or transformative energy technologies throughout the coming decades, a radical and immediate change will be near impossible the year before a policy goal is set to be in place. This notion of steady installation growth over acute installations of technology to meet policy goals is the core topic of discussion for this research. This research operationalizes this notion by developing the theoretical underpinnings of regulatory and marketmore » acceptance delays by building upon the common Technology Readiness Level (TRL) framework and offers two new additions to the research community. The new and novel Regulatory Readiness Level (RRL) and Market Readiness Level (MRL) frameworks were developed. These components, collectively called the Technology, Regulatory and Market (TRM) readiness level framework allow one to build new constraints into existing Integrated Assessment Models (IAMs) to address research questions such as, ‘To meet our desired technical and policy goals, what are the factors that affect the rate we must install technology to achieve these goals in the coming decades?’« less

Transrapid (the first high-speed Maglev train system certified ready for application): Development status and prospects for deployment

NASA Technical Reports Server (NTRS)

Luerken, Reinhard F.

1994-01-01

The Transrapid maglev technology is at the threshold of commercial deployment and technologically all prerequisites for the successful operation of the system in public service are given. In post unification Germany the domestic maglev technology is envisioned to be applied in the Berlin-Hamburg project. At present, a public-private funding concept is being prepared and the lengthy planning process is about to be initiated. In the USA the AMG has presented a program to Americanize the technology and to make it available for commercial use in the U.S. in the very near future. The paramount features of this program are to generate economic development, provide a basis for transportation technology development, create opportunities for U.S. industry, improve the U.S. transportation infrastructure, and improve the environment and traveler safety. Maglev is ready for the U.S.; is the U.S. ready for maglev?

Fiber-Based, Trace-Gas, Laser Transmitter Technology Development for Space

NASA Technical Reports Server (NTRS)

Stephen, Mark; Yu, Anthony; Chen, Jeffrey; Nicholson, Jeffrey; Engin, Doruk; Mathason, Brian; Wu, Stewart; Allan, Graham; Hasselbrack, William; Gonzalez, Brayler;

Fiber-based, trace-gas, laser transmitter technology development for space

NASA Astrophysics Data System (ADS)

Stephen, Mark; Yu, Anthony; Chen, Jeffrey; Nicholson, Jeffrey; Engin, Doruk; Mathason, Brian; Wu, Stewart; Allan, Graham; Hasselbrack, William; Gonzales, Brayler; Han, Lawrence; Numata, Kenji; Storm, Mark; Abshire, James

2015-09-01

NASA's Goddard Space Flight Center (GSFC) is working on maturing the technology readiness of a laser transmitter designed for use in atmospheric CO2 remote-sensing. GSFC has been developing an airplane-based CO2 lidar instrument over several years to demonstrate the efficacy of the instrumentation and measurement technique and to link the science models to the instrument performance. The ultimate goal is to make space-based satellite measurements with global coverage. In order to accomplish this, we must demonstrate the technology readiness and performance of the components as well as demonstrate the required power-scaling to make the link with the required signal-to-noise-ratio (SNR). To date, all the instrument components have been shown to have the required performance with the exception of the laser transmitter. In this program we are working on a fiber-based master oscillator power amplifier (MOPA) laser transmitter architecture where we will develop a ruggedized package and perform the relevant environmental tests to demonstrate TRL-6. In this paper we will review our transmitter architecture and progress on the performance and packaging of the laser transmitter.

Assessment of the Florida College and Career Readiness Initiative: Year 2 Report

ERIC Educational Resources Information Center

Mokher, Christine; Jacobson, Lou

2014-01-01

The Florida College and Career Readiness Initiative is a statewide policy that mandates college placement testing of 11th-graders who meet high school graduation criteria but are unlikely to meet college readiness criteria. Students who score below college-ready on the Postsecondary Education Readiness Test (PERT) are required to take math and…

NASA Technology Demonstrations Missions Program Overview

NASA Technical Reports Server (NTRS)

Turner, Susan

2011-01-01

The National Aeronautics and Space Administration (NASA) Fiscal Year 2010 (FY10) budget introduced a new strategic plan that placed renewed emphasis on advanced missions beyond Earth orbit. This supports NASA s 2011 strategic goal to create innovative new space technologies for our exploration, science, and economic future. As a result of this focus on undertaking many and more complex missions, NASA placed its attention on a greater investment in technology development, and this shift resulted in the establishment of the Technology Demonstrations Missions (TDM) Program. The TDM Program, within the newly formed NASA Office of the Chief Technologist, supports NASA s grand challenges by providing a steady cadence of advanced space technology demonstrations (Figure 1), allowing the infusion of flexible path capabilities for future exploration. The TDM Program's goal is to mature crosscutting capabilities to flight readiness in support of multiple future space missions, including flight test projects where demonstration is needed before the capability can transition to direct mission The TDM Program has several unique criteria that set it apart from other NASA program offices. For instance, the TDM Office matures a small number of technologies that are of benefit to multiple customers to flight technology readiness level (TRL) 6 through relevant environment testing on a 3-year development schedule. These technologies must be crosscutting, which is defined as technology with potential to benefit multiple mission directorates, other government agencies, or the aerospace industry, and they must capture significant public interest and awareness. These projects will rely heavily on industry partner collaboration, and funding is capped for all elements of the flight test demonstration including planning, hardware development, software development, launch costs, ground operations, and post-test assessments. In order to inspire collaboration across government and industry, more than 70% of the TDM funds will be competitively awarded as a result of yearly calls for proposed flight demonstrators and selected based on possible payoff to NASA, technology maturity, customer interest, cost, and technical risk reduction. This paper will give an overview of the TDM Program s mission and organization, as well as its current status in delivering advanced space technologies that will enable more flexible and robust future missions. It also will provide several examples of missions that fit within these parameters and expected outcomes.

Emotional Intelligence as a Determinant of Readiness for Online Learning

ERIC Educational Resources Information Center

Buzdar, Muhammad Ayub; Ali, Akhtar; Tariq, Riaz Ul Haq

2016-01-01

Students' performance in online learning environments is associated with their readiness to adopt a digital learning approach. Traditional concept of readiness for online learning is connected with students' competencies of using technology for learning purposes. We in this research, however, investigated psychometric aspects of students'…

Control of Technology Transfer at JPL

NASA Technical Reports Server (NTRS)

Oliver, Ronald

2006-01-01

Controlled Technology: 1) Design: preliminary or critical design data, schematics, technical flow charts, SNV code/diagnostics, logic flow diagrams, wirelist, ICDs, detailed specifications or requirements. 2) Development: constraints, computations, configurations, technical analyses, acceptance criteria, anomaly resolution, detailed test plans, detailed technical proposals. 3) Production: process or how-to: assemble, operated, repair, maintain, modify. 4) Manufacturing: technical instructions, specific parts, specific materials, specific qualities, specific processes, specific flow. 5) Operations: how-to operate, contingency or standard operating plans, Ops handbooks. 6) Repair: repair instructions, troubleshooting schemes, detailed schematics. 7) Test: specific procedures, data, analysis, detailed test plan and retest plans, detailed anomaly resolutions, detailed failure causes and corrective actions, troubleshooting, trended test data, flight readiness data. 8) Maintenance: maintenance schedules and plans, methods for regular upkeep, overhaul instructions. 9) Modification: modification instructions, upgrades kit parts, including software

College Readiness of Urban High School Students in the United States: The Role of Technology in Preparing All Students for College

ERIC Educational Resources Information Center

O'Kane, Eileen Vollert

2010-01-01

As we enter deeper into the 21st Century, there is a more urgent need to transform our educational system in the United States to better prepare our youth for the careers and technology of the future. This study examines how improving technology education at the high school level can improve the learning and college readiness of urban youth. It…

Advanced Acid Gas Separation Technology for Clean Power and Syngas Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amy, Fabrice; Hufton, Jeffrey; Bhadra, Shubhra

2015-06-30

Air Products has developed an acid gas removal technology based on adsorption (Sour PSA) that favorably compares with incumbent AGR technologies. During this DOE-sponsored study, Air Products has been able to increase the Sour PSA technology readiness level by successfully operating a two-bed test system on coal-derived sour syngas at the NCCC, validating the lifetime and performance of the adsorbent material. Both proprietary simulation and data obtained during the testing at NCCC were used to further refine the estimate of the performance of the Sour PSA technology when expanded to a commercial scale. In-house experiments on sweet syngas combined withmore » simulation work allowed Air Products to develop new PSA cycles that allowed for further reduction in capital expenditure. Finally our techno economic analysis of the use the Sour PSA technology for both IGCC and coal-to-methanol applications suggests significant improvement of the unit cost of electricity and methanol compared to incumbent AGR technologies.« less

Improving ready biodegradability testing of fatty amine derivatives.

PubMed

van Ginkel, C G; Gancet, C; Hirschen, M; Galobardes, M; Lemaire, Ph; Rosenblom, J

2008-09-01

This study assesses the biodegradation potential of a number of fatty amine derivatives in tests following the OECD guidelines for ready biodegradability. A number of methods are used to reduce toxicity and improve the bioavailability of the fatty amine derivatives in these tests. Alkyl-1,3-diaminopropanes and octadecyltrimethylammonium chloride are toxic to microorganisms at concentrations used in OECD ready biodegradability tests. The concentration of these fatty amine derivatives in the aqueous phase can be reduced by reacting humic, or lignosulphonic acids with the derivatives or through the addition of silica gel to the test bottles. Using these non-biodegradable substances, ready biodegradability test results were obtained with tallow-1,3-diaminopropane and octadecyltrimethylammonium chloride. Demonstration of the ready biodegradability of the water-insoluble dioctadecylamine under the prescribed standard conditions is almost impossible due to the limited bioavailability of this compound. However, ready biodegradability results were achieved by using very low initial test substance concentrations and by introducing an organic phase. The contents of the bottles used to assess the biodegradability of dioctadecylamine were always mixed. False negative biodegradability results obtained with the fatty amine derivatives studied are the result of toxic effects and/or limited bioavailability. The aids investigated therefore improve ready biodegradability testing.

Solar sail science mission applications and advancement

NASA Astrophysics Data System (ADS)

Macdonald, Malcolm; McInnes, Colin

2011-12-01

Solar sailing has long been envisaged as an enabling or disruptive technology. The promise of open-ended missions allows consideration of radically new trajectories and the delivery of spacecraft to previously unreachable or unsustainable observation outposts. A mission catalogue is presented of an extensive range of potential solar sail applications, allowing identification of the key features of missions which are enabled, or significantly enhance, through solar sail propulsion. Through these considerations a solar sail application-pull technology development roadmap is established, using each mission as a technology stepping-stone to the next. Having identified and developed a solar sail application-pull technology development roadmap, this is incorporated into a new vision for solar sailing. The development of new technologies, especially for space applications, is high-risk. The advancement difficulty of low technology readiness level research is typically underestimated due to a lack of recognition of the advancement degree of difficulty scale. Recognising the currently low technology readiness level of traditional solar sailing concepts, along with their high advancement degree of difficulty and a lack of near-term applications a new vision for solar sailing is presented which increases the technology readiness level and reduces the advancement degree of difficulty of solar sailing. Just as the basic principles of solar sailing are not new, they have also been long proven and utilised in spacecraft as a low-risk, high-return limited-capability propulsion system. It is therefore proposed that this significant heritage be used to enable rapid, near-term solar sail future advancement through coupling currently mature solar sail, and other, technologies with current solar sail technology developments. As such the near-term technology readiness level of traditional solar sailing is increased, while simultaneously reducing the advancement degree of difficulty along the solar sail application-pull technology development roadmap.

SHARED TECHNOLOGY TRANSFER PROGRAM

DOE Office of Scientific and Technical Information (OSTI.GOV)

GRIFFIN, JOHN M. HAUT, RICHARD C.

2008-03-07

The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderockmore » unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.« less

SERT C project study

NASA Technical Reports Server (NTRS)

1974-01-01

The SERT C (Space Electric Rocket Test - C) project study defines a spacecraft mission that would demonstrate the technology readiness of ion thruster systems for primary propulsion and station keeping applications. As a low cost precursor, SERT C develops the components and systems required for subsequent Solar Electric Propulsion (SEP) applications. The SERT C mission requirements and preliminary spacecraft and subsystem design are described.

The state of knowledge on technologies and their use for fall detection: A scoping review.

PubMed

Lapierre, N; Neubauer, N; Miguel-Cruz, A; Rios Rincon, A; Liu, L; Rousseau, J

2018-03-01

Globally, populations are aging with increasing life spans. The normal aging process and the resulting disabilities increase fall risks. Falls are an important cause of injury, loss of independence and institutionalization. Technologies have been developed to detect falls and reduce their consequences but their use and impact on quality of life remain debatable. Reviews on fall detection technologies exist but are not extensive. A comprehensive literature review on the state of knowledge of fall detection technologies can inform research, practice, and user adoption. To examine the extent and the diversity of current technologies for fall detection in older adults. A scoping review design was used to search peer-reviewed literature on technologies to detect falls, published in English, French or Spanish since 2006. Data from the studies were analyzed descriptively. The literature search identified 3202 studies of which 118 were included for analysis. Ten types of technologies were identified ranging from wearable (e.g., inertial sensors) to ambient sensors (e.g., vision sensors). Their Technology Readiness Level was low (mean 4.54 SD 1.25; 95% CI [4.31, 4.77] out of a maximum of 9). Outcomes were typically evaluated on technological basis and in controlled environments. Few were evaluated in home settings or care units with older adults. Acceptability, implementation cost and barriers were seldom addressed. Further research should focus on increasing Technology Readiness Levels of fall detection technologies by testing them in real-life settings with older adults. Copyright © 2017 Elsevier B.V. All rights reserved.

Technology Acceptance of E-Learning within a Blended Vocational Course in West Africa

ERIC Educational Resources Information Center

Mehta, Ashwin

2014-01-01

Replacing lecture-based learning content with online information can augment learner-content interaction and facilitate greater mastery over a subject. The success of online delivery will depend on the readiness of learners to use and accept technology as well as the readiness of the organizational infrastructure to support a learner-centric…

Exploring Readiness, Motivation, and Capacity for Implementing an iPad Campus Initiative: A Rural Community College Case Study

ERIC Educational Resources Information Center

Smith, Douglas A.; Coleman, Dawn

2018-01-01

This intrinsic case study explored organizational readiness to implement a campus-wide technology initiative. Specifically, this research examined a rural community college's implementation of an "iPad campus" initiative in which all students, faculty, and staff were required to adopt iPad technology. We apply a heuristic for…

Employers' Perspectives on New Information Technology Technicians' Employability in North Florida

ERIC Educational Resources Information Center

Hollister, Jonathan M.; Spears, Laura I.; Mardis, Marcia A.; Lee, Jisue; McClure, Charles R.; Liebman, Elizabeth

2017-01-01

Purpose: In response to recent calls for research relating to employers' perceptions of the workplace readiness of new graduates in a variety of fields, the purpose of this paper is to report North Florida employers' perceptions of information technology (IT) program graduates' workplace readiness. These findings are relevant to stakeholders in…

National Research Council Dialogue to Assess Progress on NASA's Transformational Spaceport and Range Technologies Capability Roadmap Development: General Background and Introduction

NASA Technical Reports Server (NTRS)

Skelly, Darin M.

2005-01-01

Viewgraphs on the National Research Council's diaglog to assess progress on NASA's transformational spaceport and range technologies capability roadmap development is presented. The topics include: 1) Agency Goals and Objectives; 2) Strategic Planning Transformation; 3) Advanced Planning Organizational Roles; 4) Public Involvement in Strategic Planning; 5) Strategic Roadmaps; 6) Strategic Roadmaps Schedule; 7) Capability Roadmaps; 8) Capability Charter; 9) Process for Team Selection; 10) Capability Roadmap Development Schedule Overview; 11) Purpose of NRC Review; 12) Technology Readiness Levels; 13) Capability Readiness Levels; 14) Crosswalk Matrix Trans Spaceport & Range; 15) Example linkage to other roadmaps; 16) Capability Readiness Levels Defined; and 17) Crosswalk Matrix Ratings Work In-progress.

The Importance of Technology Readiness in NASA Earth Venture Missions

NASA Technical Reports Server (NTRS)

Wells, James E.; Komar, George J.

2009-01-01

The first set of Venture-class investigations share the characteristic that the technology should be mature and all investigations must use mature technology that has been modeled or demonstrated in a relevant environment (Technology Readiness Level (TRL) >5). Technology Readiness Levels are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. The TRL is used in NASA technology planning. A major step in the level of fidelity of the technology demonstration follows the completion of TRL 5. At TRL 6, a system or subsystem model or prototype must be demonstrated in a relevant environment (ground or space) representative model or prototype system or system, which would go well beyond ad hoc, "patch-cord," or discrete component level breadboarding. These TRL levels are chosen as target objectives for the Program. The challenge for offerors is that they must identify key aspects (uncertainty, multi subsystem complexity, etc) of the TRL estimate that should be properly explained in a submitted proposal. Risk minimization is a key component of the Earth Venture missions. Experiences of prior airborne missions will be shared. The discussion will address aspects of uncertainty and issues surrounding three areas of airborne earth science missions: (1) Aircraft or proposed flight platform -- Expressing the capability of the aircraft in terms of the supporting mission requirements. These issues include airplane performance characteristics (duration, range, altitude, among others) and multiship complexities. (2) Instruments -- Establishing that the instruments have been demonstrated in a relevant environment. Instruments with heritage in prior space missions meet this requirement, as do instruments tested on the ground. Evidence that the instruments have demonstrated the ability to collect data as advertised will be described. The complexity of the integration of multiple subsystems will also be addressed. Issues associated with tailoring the instrument to meet the specific Venture mission objectives must be thoroughly explained and justified. (3) Aircraft/Instrument Integration -- Explicitly defining what development may be required to harden the instrument and integrate the instrument. The challenges associated with this key aspect of major airborne earth science investigations will be presented.

Slush Hydrogen Technology Program

NASA Technical Reports Server (NTRS)

Cady, Edwin C.

1994-01-01

A slush hydrogen (SH2) technology facility (STF) was designed, fabricated, and assembled by a contractor team of McDonnell Douglas Aerospace (MDA), Martin Marietta Aerospace Group (MMAG), and Air Products and Chemicals, Inc. (APCI). The STF consists of a slush generator which uses the freeze-thaw production process, a vacuum subsystem, a test tank which simulates the NASP vehicle, a triple point hydrogen receiver tank, a transfer subsystem, a sample bottle, a pressurization system, and a complete instrumentation and control subsystem. The STF was fabricated, checked-out, and made ready for testing under this contract. The actual SH2 testing was performed under the NASP consortium following NASP teaming. Pre-STF testing verified SH2 production methods, validated special SH2 instrumentation, and performed limited SH2 pressurization and expulsion tests which demonstrated the need for gaseous helium pre-pressurized of SH2 to control pressure collapse. The STF represents cutting-edge technology development by an effective Government-Industry team under very tight cost and schedule constraints.

Orion Hatch Window Testing

NASA Image and Video Library

2018-04-09

Mark Nurge, Ph.D., a physicist in the Applied Physics Lab with the Exploration Research and Technology Programs at NASA's Kennedy Space Center in Florida, looks at data during the first optical quality test on a full window stack that is ready for installation in the docking hatch of NASA's Orion spacecraft. The data from the tests will help improve the requirements for manufacturing tolerances on Orion's windows and verify how the window should perform in space. Orion is being prepared for its first integrated uncrewed flight atop NASA's Space Launch System rocket on Exploration Mission-1.

Pedagogical Conditions of Ensuring Students' Readiness for Scientific Researches--Example of Technical University

ERIC Educational Resources Information Center

Slessarev, Yuri Vassilyevich; Moisseyev, Vassily Borisovich; Vostroknutov, Evgeniy Vladimirovich

2015-01-01

This article describes pedagogical conditions of ensuring students readiness for scientific researches on the basis of scientific literature and experience of Penza State Technological University students. Introduction of suggested conditions favors the process of training of highly skilled expert who is ready for generation of new ideas in fields…

Critical Low-Noise Technologies Being Developed for Engine Noise Reduction Systems Subproject

NASA Technical Reports Server (NTRS)

Grady, Joseph E.; Civinskas, Kestutis C.

2004-01-01

NASA's previous Advanced Subsonic Technology (AST) Noise Reduction Program delivered the initial technologies for meeting a 10-year goal of a 10-dB reduction in total aircraft system noise. Technology Readiness Levels achieved for the engine-noise-reduction technologies ranged from 4 (rig scale) to 6 (engine demonstration). The current Quiet Aircraft Technology (QAT) project is building on those AST accomplishments to achieve the additional noise reduction needed to meet the Aerospace Technology Enterprise's 10-year goal, again validated through a combination of laboratory rig and engine demonstration tests. In order to meet the Aerospace Technology Enterprise goal for future aircraft of a 50- reduction in the perceived noise level, reductions of 4 dB are needed in both fan and jet noise. The primary objectives of the Engine Noise Reduction Systems (ENRS) subproject are, therefore, to develop technologies to reduce both fan and jet noise by 4 dB, to demonstrate these technologies in engine tests, and to develop and experimentally validate Computational Aero Acoustics (CAA) computer codes that will improve our ability to predict engine noise.

Ares Project Technology Assessment: Approach and Tools

NASA Technical Reports Server (NTRS)

Hueter, Uwe; Tyson, Richard

2010-01-01

Technology assessments provide a status of the development maturity of specific technologies. Along with benefit analysis, the risks the project assumes can be quantified. Normally due to budget constraints, the competing technologies are prioritized and decisions are made which ones to fund. A detailed technology development plan is produced for the selected technologies to provide a roadmap to reach the desired maturity by the project s critical design review. Technology assessments can be conducted for both technology only tasks or for product development programs. This paper is primarily biased toward the product development programs. The paper discusses the Ares Project s approach to technology assessment. System benefit analysis, risk assessment, technology prioritization, and technology readiness assessment are addressed. A description of the technology readiness level tool being used is provided.

Agility in adversity: Vaccines on Demand.

PubMed

De Groot, Anne S; Moise, Leonard; Olive, David; Einck, Leo; Martin, William

2016-09-01

Is the US ready for a biological attack using Ebola virus or Anthrax? Will vaccine developers be able to produce a Zika virus vaccine, before the epidemic spreads around the world? A recent report by The Blue Ribbon Study Panel on Biodefense argues that the US is not ready for these challenges, however, technologies and capabilities that could address these deficiencies are within reach. Vaccine technologies have advanced and readiness has improved in recent years, due to advances in sequencing technology and computational power making the 'vaccines on demand' concept a reality. Building a robust strategy to design effective biodefense vaccines from genome sequences harvested by real-time biosurveillance will benefit from technologies that are being brought to bear on the cancer cure 'moonshot'. When combined with flexible vaccine production platforms, vaccines on demand will relegate expensive and, in some cases, insufficiently effective vaccine stockpiles to the dust heap of history.

Orion Hatch Window Testing

NASA Image and Video Library

2018-04-09

The first optical quality testing on a full window stack that is ready for installation in the docking hatch of NASA's Orion spacecraft is underway inside a laboratory in the Neil Armstrong Operations and Checkout Building at the agency's Kennedy Space Center in Florida. The test is being performed by a team from the center's Exploration Research and Technology Programs. The data from the tests will help improve the requirements for manufacturing tolerances on Orion's windows and verify how the window should perform in space. Orion is being prepared for its first integrated uncrewed flight atop NASA's Space Launch System rocket on Exploration Mission-1.

Technology review of flight crucial flight control systems (application of optical technology)

NASA Technical Reports Server (NTRS)

Rediess, H. A.; Buckley, E. C.

1984-01-01

The survey covers the various optical elements that are considered in a fly-by-light flight control system including optical sensors and transducers, optical data links, so-called optical actuators, and optical/electro-optical processing. It also addresses airframe installation, maintenance, and repair issues. Rather than an in-depth treatment of optical technology, the survey concentrates on technology readiness and the potential advantages/disadvantages of applying the technology. The information was assembled from open literature, personal interviews, and responses to a questionnaire distributed specifically for this survey. Not all of the information obtained was consistent, particularly with respect to technology readiness. The synthesis of information into the perception of the state-of-technology is presented.

Nanotechnology

NASA Technical Reports Server (NTRS)

Biaggi-Labiosa, Azlin

2016-01-01

Present an overview of the Nanotechnology Project at NASA's Game Changing Technology Industry Day. Mature and demonstrate flight readiness of CNT reinforced composites for future NASA mission applications?Sounding rocket test in a multiexperiment payload?Integrate into cold gas thruster system as propellant storage?The technology would provide the means for reduced COPV mass and improved damage tolerance and flight qualify CNT reinforced composites. PROBLEM/NEED BEING ADDRESSED:?Reduce weight and enhance the performance and damage tolerance of aerospace structuresGAME-CHANGING SOLUTION:?Improve mechanical properties of CNTs to eventually replace CFRP –lighter and stronger?First flight-testing of a CNT reinforced composite structural component as part of an operational flight systemUNIQUENESS:?CNT manufacturing methods developed?Flight qualify CNT reinforced composites

GPIM AF-M315E Propulsion System

NASA Technical Reports Server (NTRS)

Spores, Ronald A.; Masse, Robert; Kimbrel, Scott; McLean, Chris

2014-01-01

The NASA Space Technology mission Directorate's (STMD) Green Propellant Infusion Mission (GPIM) Technology Demonstration Mission (TDM) will demonstrate an operational AF-M315E green propellant propulsion system. Aerojet-Rocketdyne is responsible for the development of the propulsion system payload. This paper statuses the propulsion system module development, including thruster design and system design; Initial test results for the 1N engineering model thruster are presented. The culmination of this program will be high-performance, green AF-M315E propulsion system technology at TRL 7+, with components demonstrated to TRL 9, ready for direct infusion to a wide range of applications for the space user community.

The Interplay of School Readiness and Teacher Readiness for Educational Technology Integration: A Structural Equation Model

ERIC Educational Resources Information Center

Petko, Dominik; Prasse, Doreen; Cantieni, Andrea

2018-01-01

Decades of research have shown that technological change in schools depends on multiple interrelated factors. Structural equation models explaining the interplay of factors often suffer from high complexity and low coherence. To reduce complexity, a more robust structural equation model was built with data from a survey of 349 Swiss primary school…

The Impact of Student Teaching Experience on Pre-Service Teachers' Readiness for Technology Integration: A Mixed Methods Study with Growth Curve Modeling

ERIC Educational Resources Information Center

Sun, Yan; Strobel, Johannes; Newby, Timothy J.

2017-01-01

Adopting a two-phase explanatory sequential mixed methods research design, the current study examined the impact of student teaching experiences on pre-service teachers' readiness for technology integration. In phase-1 of quantitative investigation, 2-level growth curve models were fitted using online repeated measures survey data collected from…

Ready or Not? Assessing Change Readiness for Implementation of the Geospatial Technology Competency Model[c

ERIC Educational Resources Information Center

Annulis, Heather M.; Gaudet, Cyndi H.

2007-01-01

A shortage of a qualified and skilled workforce exists to meet the demands of the geospatial industry (NASA, 2002). Solving today's workforce issues requires new and innovative methods and techniques for this high growth, high technology industry. One tool to support workforce development is a competency model which can be used to build a…

Development and pilot-test of the Workplace Readiness Questionnaire, a theory-based instrument to measure small workplaces’ readiness to implement wellness programs

PubMed Central

Hannon, Peggy A.; Helfrich, Christian D.; Chan, K. Gary; Allen, Claire L.; Hammerback, Kristen; Kohn, Marlana J.; Parrish, Amanda T.; Weiner, Bryan J.; Harris, Jeffrey R.

2016-01-01

Purpose To develop a theory-based questionnaire to assess readiness for change in small workplaces adopting wellness programs. Design In developing our scale, we first tested items via “think-aloud” interviews. We tested the revised items in a cross-sectional quantitative telephone survey. Setting Small workplaces (20–250 employees) in low-wage industries. Subjects Decision-makers representing small workplaces in King County, Washington (think-aloud interviews, n=9) and the United States (telephone survey, n=201). Measures We generated items for each construct in Weiner’s theory of organizational readiness for change. We also measured workplace characteristics and current implementation of workplace wellness programs. Analysis We assessed reliability by coefficient alpha for each of the readiness questionnaire subscales. We tested the association of all subscales with employers’ current implementation of wellness policies, programs, and communications, and conducted a path analysis to test the associations in the theory of organizational readiness to change. Results Each of the readiness subscales exhibited acceptable internal reliability (coefficient alpha range = .75–.88) and was positively associated with wellness program implementation (p <.05). The path analysis was consistent with the theory of organizational readiness to change, except change efficacy did not predict change-related effort. Conclusion We developed a new questionnaire to assess small workplaces’ readiness to adopt and implement evidence-based wellness programs. Our findings also provide empirical validation of Weiner’s theory of readiness for change. PMID:26389975

Development and Pilot Test of the Workplace Readiness Questionnaire, a Theory-Based Instrument to Measure Small Workplaces' Readiness to Implement Wellness Programs.

PubMed

Hannon, Peggy A; Helfrich, Christian D; Chan, K Gary; Allen, Claire L; Hammerback, Kristen; Kohn, Marlana J; Parrish, Amanda T; Weiner, Bryan J; Harris, Jeffrey R

2017-01-01

To develop a theory-based questionnaire to assess readiness for change in small workplaces adopting wellness programs. In developing our scale, we first tested items via "think-aloud" interviews. We tested the revised items in a cross-sectional quantitative telephone survey. The study setting comprised small workplaces (20-250 employees) in low-wage industries. Decision-makers representing small workplaces in King County, Washington (think-aloud interviews, n = 9), and the United States (telephone survey, n = 201) served as study subjects. We generated items for each construct in Weiner's theory of organizational readiness for change. We also measured workplace characteristics and current implementation of workplace wellness programs. We assessed reliability by coefficient alpha for each of the readiness questionnaire subscales. We tested the association of all subscales with employers' current implementation of wellness policies, programs, and communications, and conducted a path analysis to test the associations in the theory of organizational readiness to change. Each of the readiness subscales exhibited acceptable internal reliability (coefficient alpha range, .75-.88) and was positively associated with wellness program implementation ( p < .05). The path analysis was consistent with the theory of organizational readiness to change, except change efficacy did not predict change-related effort. We developed a new questionnaire to assess small workplaces' readiness to adopt and implement evidence-based wellness programs. Our findings also provide empirical validation of Weiner's theory of readiness for change.

Assessing farmers' community readiness towards the enhancement of natural enemy population in rice fields in Malacca

NASA Astrophysics Data System (ADS)

Fairuz, K.; Idris, A. G.; Syahrizan, S.; Hatijah, K.

2018-04-01

Malacca has committed to be a green technology state by the year 2020. Agriculture is one of the main industries that have been highlighted to achieve this goal especially rice farming activities. Some limitations for this issue have restricted the accomplishment of the plan including pesticide usage among rice farmers. The use of chemicals in rice field need to be reduced significantly in order to support the goal. One of the indicators to the successfulness of pesticide reduction is the increasing numbers of natural enemies' species abundance and population in the rice field. Natural enemies were important to regulate pest populations in rice field naturally. Farmers' readiness to participate in this issue is very important to ensure the successfulness. The level of readiness of farmers' community will determine whether they are ready or not to execute the plan. Unfortunately, such information in rice farmers' community was not properly measured. Thus this study was aimed to assess the readiness level of rice farmers' community to change in order to enhance natural enemies in their rice field. This study was adapting the CR model as its theoretical framework. Three rice farming area in Malacca were involved in this study namely, Jasin, Melaka Tengah and Alor Gajah. Questionnaires were used as major instrument and were randomly distributed to 224 farmers. Data collected were tested for their reliability, significance and level of readiness. Knowledge of issue, knowledge of effort and resources dimensions were found influencing the readiness dimension significantly, whilst the attitude and leadership dimensions were not. Generally, the level of readiness for farmers' community in Malacca was found in the sixth or initial stage, where some of them initially have started to practice a few related activities to enhance the natural enemies' population in their rice field. Continuous support and assistant from the leaders and local authorities are crucially needed in order to sustain and improve the farmers' community level of readiness.

Definition and Development of Habitation Readiness Levels (HRLs) for Planetary Surface Habitats

NASA Technical Reports Server (NTRS)

Connolly, Janis H.; Toups, Larry

2007-01-01

One could argue that NASA has never developed a true habitat for a planetary surface, with only the Lunar Module from the 1960's-era Apollo Program providing for a sparse 2 person, 3 day capability. An integral part of NASA's current National Vision for Space Exploration is missions back to the moon and eventually to Mars. One of the largest leaps i11 lunar surface exploration beyond the Apollo lunar missions will be the conduct of these extended duration human missions. These missions could range from 30 to 90 days in length initially and may eventually range up to 500 days in length. To enable these extended duration human missions, probably the single-most important lunar surface element is the Surface Habitat. The requirements that must be met by the Surface Habitat will go far beyond the safety, performance and operational requirements of the Lunar Module, and NASA needs to develop a basis for making intelligent, technically correct habitat design decisions. This paper will discuss the possibilities of the definition and development of a Habitation Readiness Level (HRL) scale that might be mapped to current Technology Readiness Levels (TRLs) for technology development. HRLs could help measure how well a particular technology thrust is advanced by a proposed planetary habitat concept. The readiness level would have to be measured differently than TRLs, and may include such milestones as habitat design performance under simulated mission operations and constraints (including relevant field testing), functional allocation demonstrations, crew interface evaluation and post-occupancy evaluation. With many concepts for planetary habitats proposed over the past 20 years, there are many strategic technical challenges facing designers of planetary habitats that will support NASA's exploration of the moon and Mars. The systematic assessment of a variety of planetary habitat options will be an important approach and will influence the associated requirements for human design, volumetrics, functionality, systems hardware and operations.

Prediction of Academic Achievement with the McCarthy Screening Test and Metropolitan Readiness Test.

ERIC Educational Resources Information Center

Gullo, Dominic F.; And Others

1984-01-01

Examined the efficacy of the McCarthy Screening Test (MST) and Metropolitan Readiness Test (MRT) to predict academic readiness after kindergarten and achievement at the end of first grade. The MST significantly predicted children's scores of the MRT and SFAT. Additionally, the MRT was a significant predictor of the SFAT. (JAC)

Assessment of Stirling Technology Has Provided Critical Data Leading Toward Flight Readiness of the Stirling Converter

NASA Technical Reports Server (NTRS)

Thieme, Lanny G.

2001-01-01

The NASA Glenn Research Center is supporting the development of a Stirling converter with the Department of Energy (DOE, Germantown, Maryland) for an advanced Stirling Radioisotope Power System (SRPS) to provide spacecraft onboard electric power for NASA space science missions. A key technology assessment completed by Glenn and DOE has led to the SRPS being identified as a high-efficiency power source for such deep space missions as the Europa Orbiter and the Solar Probe. In addition, the Stirling system is now being considered for unmanned Mars rovers, especially where mission profiles may exclude the use of photovoltaic power systems, such as exploration at high Martian latitudes or for missions of long duration. The SRPS efficiency of over 20 percent will reduce the required amount of radioisotope by more than a factor of 3 in comparison to current radioisotope thermoelectric generators. This significantly reduces radioisotope cost, radiological inventory, and system cost, and it provides efficient use of scarce radioisotope resources. In support of this technology assessment, Glenn conducted a series of independent evaluations and tests to determine the technology readiness of a 55-We Stirling converter developed by Stirling Technology Company (Kennewick, Washington) and DOE. Key areas evaluated by Glenn included: 1) Radiation tolerance of materials; 2) Random vibration testing of the Stirling converter in Glenn's Structural Dynamics Lab to simulate operation in the launch environment; 3) Electromagnetic interference and compatibility (EMI/EMC) of the converter operating in Glenn's EMI lab; Independent failure modes, effects, and criticality analysis, and life and reliability 4. Independent failure modes, effects, and criticality analysis, and life and reliability assessment; and 5) SRPS cost estimate. The data from these evaluations were presented to NASA Headquarters and the Jet Propulsion Laboratory mission office by a joint industry/Government team consisting of DOE, Glenn, and Lockheed Martin Astronautics. This team concluded that there are no technical reasons that would rule out using the Stirling converter for deep space missions. As a direct result of the successful testing at Glenn, the DOE/Stirling Technology Company 55-We Stirling converter has been baselined for the SRPS. Glenn is now continuing an in-house project to assist in developing the Stirling converter for readiness for space qualification and mission implementation. As part of this effort, the Stirling converter will be further characterized under launch environment random vibration testing, methods to reduce converter EMI will be developed, and an independent performance verification will be completed. Converter life assessment and permanent magnet aging characterization tasks are also underway. Substitute organic materials for the linear alternator and piston bearing coatings for use in a high-radiation environment have been identified and have now been incorporated in Stirling converters built by Stirling Technology Company for Glenn. Electromagnetic and thermal finite element analyses for the alternator are also being conducted.

The Photovolatic Power Converter: A Technology Readiness Assessment

DTIC Science & Technology

2005-06-01

Field Test Configurations .............................................................42 Figure 8. SBR Deployed on a pack and flat on the ground...2. Atira and NPS47 The Graduate School of Business and Public Policy ( BPP ) is one of four schools that organizes and conducts research projects...at NPS. “ BPP is responsible for eight graduate academic programs and awards eight graduate degrees. The largest program is the resident defense

Development of STEM Readiness Benchmarks to Assist Educational and Career Decision Making. ACT Research Report Series, 2015 (3)

ERIC Educational Resources Information Center

Mattern, Krista; Radunzel, Justine; Westrick, Paul

2015-01-01

Although about 40% of high school graduates who take the ACT® test express interest in pursuing a career in a science, technology, engineering, and mathematics (STEM) field, the percentage of first-year students in college who declare a STEM major is substantially lower. The pool of prospective STEM workers shrinks further as the majority of STEM…

A case history of technology transfer

NASA Technical Reports Server (NTRS)

1981-01-01

A sequence of events, occurring over the last 25 years, are described that chronicle the evolution of ion-bombardment electric propulsion technology. Emphasis is placed on the latter phases of this evolution, where special efforts were made to pave the way toward the use of this technology in operational space flight systems. These efforts consisted of a planned program to focus the technology toward its end applications and an organized process that was followed to transfer the technology from the research-technology NASA Center to the user-development NASA Center and its industry team. Major milestones in this evolution, which are described, include the development of thruster technology across a large size range, the successful completion of two space electric rocket tests, SERT I and SERT II, development of power-processing technology for electric propulsion, completion of a program to make the technology ready for flight system development, and finally the technology transfer events.

TRL Assessment of Solar Sail Technology Development Following the 20-Meter System Ground Demonstrator Hardware Testing

NASA Technical Reports Server (NTRS)

Young, Roy M.; Adams, Charles L.

2010-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office sponsored two separate, independent solar sail system design and development demonstration activities during 2002-2005. ATK Space Systems of Goleta, CA was the prime contractor for one development team and L' Garde, Inc. of Tustin, CA was the prime contractor for the other development team. The goal of these activities was to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by the year 2006. Component and subsystem fabrication and testing were completed successfully, including the ground deployment of 10-meter and 20-meter demonstration hardware systems under vacuum conditions. The deployment and structural testing of the 20-meter solar sail systems was conducted in the 30 meter diameter Space Power Facility thermal-vacuum chamber at NASA Glenn Plum Brook in April though August, 2005. This paper will present the results of the TRL assessment following the solar sail technology development activities associated with the design, development, analysis and testing of the 20-meter system ground demonstrators.

Development of a PPT for the EO-1 Spacecraft

NASA Technical Reports Server (NTRS)

Benson, Scott W.; Arrington, Lynn A.; Hoskins, W. Andrew; Meckel, Nicole J.

2000-01-01

A Pulsed Plasma Thruster (PPT) has been developed for use in a technology demonstration flight experiment on the Earth Observing 1 (EO-1) New Millennium Program mission. The thruster replaces the spacecraft pitch axis momentum wheel for control and momentum management during an experiment of a minimum three-day duration. The EO-1 PPT configuration is a combination of new technology and design heritage from similar systems flown in the 1970's and 1980's. Acceptance testing of the protoflight unit has validated readiness for flight, and integration with the spacecraft, including initial combined testing, has been completed. The thruster provides a range of capability from 90 microN-sec impulse bit at 650 sec specific impulse for 12 W input power, through 860 microN-sec impulse bit at 1400 see specific impulse for 70 W input power. Development of this thruster reinitiates technology research and development and re-establishes an industry base for production of flight hardware. This paper reviews the EO-1 PPT development, including technology selection, design and fabrication, acceptance testing, and initial spacecraft integration and test.

Acceptance Testing of the Vapor Phase Catalytic Ammonia Removal Engineering Development Unit

NASA Technical Reports Server (NTRS)

Flynn, Michael; Fisher, John; Kliss, Mark; Tleimat, Maher; Quinn, Gregory; Fort, James; Nalette, Tim; Baker, Gale

2005-01-01

This paper describes the results of acceptance testing of the Vapor Phase Catalytic Ammonia Removal (VPCAR) technology. The VPCAR technology is currently being developed by NASA as a Mars transit vehicle water recycling system. NASA has recently completed a grant to develop a next generation VPCAR system. This grant was peer reviewed and funded through the Advanced Life Support (ALS) National Research Announcement (NRA). The grant funded a contract with Water Reuse Technology Inc. to construct an engineering development unit. This contract concluded with the shipment of the final deliverable to NASA on 8/31/03. The objective of the acceptance testing was to characterize the performance of this new system. This paper presents the results of mass power, and volume measurements for the delivered system. In addition, product water purity analysis for a Mars transit mission and a planetary base wastewater ersatz are provided. Acoustic noise levels, interface specifications and system reliability results are also discussed. An assessment of the readiness of the technology for human testing and recommendations for future improvements are provided.

Technology Development of a Fiber Optic-Coupled Laser Ignition System for Multi-Combustor Rocket Engines

NASA Technical Reports Server (NTRS)

Trinh, Huu P.; Early, Jim; Osborne, Robin; Thomas, Matthew E.; Bossard, John A.

2002-01-01

This paper addresses the progress of technology development of a laser ignition system at NASA Marshall Space Flight Center (MSFC). The first two years of the project focus on comprehensive assessments and evaluations of a novel dual-pulse laser concept, flight- qualified laser system, and the technology required to integrate the laser ignition system to a rocket chamber. With collaborations of the Department of Energy/Los Alamos National Laboratory (LANL) and CFD Research Corporation (CFDRC), MSFC has conducted 26 hot fire ignition tests with lab-scale laser systems. These tests demonstrate the concept feasibility of dual-pulse laser ignition to initiate gaseous oxygen (GOX)/liquid kerosene (RP-1) combustion in a rocket chamber. Presently, a fiber optic- coupled miniaturized laser ignition prototype is being implemented at the rocket chamber test rig for future testing. Future work is guided by a technology road map that outlines the work required for maturing a laser ignition system. This road map defines activities for the next six years, with the goal of developing a flight-ready laser ignition system.

Design, fabrication and acceptance testing of a zero gravity whole body shower

NASA Technical Reports Server (NTRS)

Schumacher, E. A.; Lenda, J. A.

1974-01-01

Recent research and development programs have established the ability of the zero gravity whole body shower to maintain a comfortable environment in which the crewman can safely cleanse and dry the body. The purpose of this program was to further advance the technology of whole body bathing and to demonstrate technological readiness including in-flight maintenance by component replacement for flight applications. Three task efforts of this program are discussed. Conceptual designs and system tradeoffs were accomplished in task 1. Task 2 involved the formulation of preliminary and final designs for the shower, while task 3 included the fabrication and test of the shower assembly. Particular attention is paid to the evaluation and correction of test anomalies during the final phase of the program.

Computer-Based Assessment of School Readiness and Early Reasoning

ERIC Educational Resources Information Center

Csapó, Beno; Molnár, Gyöngyvér; Nagy, József

2014-01-01

This study explores the potential of using online tests for the assessment of school readiness and for monitoring early reasoning. Four tests of a face-to-face-administered school readiness test battery (speech sound discrimination, relational reasoning, counting and basic numeracy, and deductive reasoning) and a paper-and-pencil inductive…

Predicting Achievement in Grades Three through Ten Using the Metropolitan Readiness Test.

ERIC Educational Resources Information Center

Weller, L. David; And Others

1992-01-01

Assessed correlations between 415 first graders' scores on the Metropolitan Readiness Test (MRT), and their scores on standardized achievement tests in mathematics and reading in grades 3, 6, 9, and 10. Concluded that the MRT has potential for contributing to readiness decisions in early grades. (MM)

Bringing Together Mentoring, Technology, and Whole-School Reform: A First Look at the iMentor College Ready Program. Report

ERIC Educational Resources Information Center

Merrill, Lisa; Siman, Nina; Wulach, Suzanne; Kang, David

2015-01-01

iMentor's College Ready Program is a unique approach that combines elements of school-based mentoring, whole school reform, and technology in an effort to help students develop the full suite of knowledge, behaviors, and skills they need to complete high school and enroll and thrive in college. iMentor partners with high schools that serve…

Motivation and Technological Readiness in the Use of High-Fidelity Simulation: A Descriptive Comparative Study of Nurse Educators

ERIC Educational Resources Information Center

Duvall, Judy Jo

2012-01-01

There are many driving forces to increase the use of high-fidelity simulation (HFS) in nursing education, as well as many factors that may influence the implementation of this teaching strategy. These include the motivation of nurse educators to use HFS, the technological readiness of nurse educators to use HFS and the changing demographics of the…

Evolution paths for advanced automation

NASA Technical Reports Server (NTRS)

Healey, Kathleen J.

1990-01-01

As Space Station Freedom (SSF) evolves, increased automation and autonomy will be required to meet Space Station Freedom Program (SSFP) objectives. As a precursor to the use of advanced automation within the SSFP, especially if it is to be used on SSF (e.g., to automate the operation of the flight systems), the underlying technologies will need to be elevated to a high level of readiness to ensure safe and effective operations. Ground facilities supporting the development of these flight systems -- from research and development laboratories through formal hardware and software development environments -- will be responsible for achieving these levels of technology readiness. These facilities will need to evolve support the general evolution of the SSFP. This evolution will include support for increasing the use of advanced automation. The SSF Advanced Development Program has funded a study to define evolution paths for advanced automaton within the SSFP's ground-based facilities which will enable, promote, and accelerate the appropriate use of advanced automation on-board SSF. The current capability of the test beds and facilities, such as the Software Support Environment, with regard to advanced automation, has been assessed and their desired evolutionary capabilities have been defined. Plans and guidelines for achieving this necessary capability have been constructed. The approach taken has combined indepth interviews of test beds personnel at all SSF Work Package centers with awareness of relevant state-of-the-art technology and technology insertion methodologies. Key recommendations from the study include advocating a NASA-wide task force for advanced automation, and the creation of software prototype transition environments to facilitate the incorporation of advanced automation in the SSFP.

Human Exploration Missions - Maturing Technologies to Sustain Crews

NASA Technical Reports Server (NTRS)

Mukai, Chiaki; Koch, Bernhard; Reese, Terrence G.

2012-01-01

Human exploration missions beyond low earth orbit will be long duration with abort scenarios of days to months. Providing crews with the essentials of life such as clean air and potable water means recycling human metabolic wastes back to useful products. Individual technologies are under development for such things as CO2 scrubbing, recovery of O2 from CO2, turning waste water into potable water, and so on. But in order to fully evaluate and mature technologies fully they must be tested in a relevant, high-functionality environment; a systems environment where technologies are challenged with real human metabolic wastes. It is for this purpose that an integrated systems ground testing capability at the Johnson Space Center is being readied for testing. The relevant environment will include deep space habitat human accommodations, sealed atmosphere of 8 psi total pressure and 32% oxygen concentration, life support systems (food, air, water), communications, crew accommodations, medical, EVA, tools, etc. Testing periods will approximate those of the expected missions (such as a near Earth asteroid, Earth ]Moon L2 or L1, the moon, and Mars). This type of integrated testing is needed not only for research and technology development but later during the mission design, development, test, and evaluation phases of preparing for the mission.

Is Your School Ready?

ERIC Educational Resources Information Center

Bracey, Gerald W.

2005-01-01

The Ready School, a concept endorsed by the National Education Goals Panel, focuses on getting schools ready for children to supplement the traditional approach of getting children ready for school. The author cites 10 qualities associated with Ready Schools and describes the eight-dimension Ready School Assessment project now being tested by the…

Urban Combat Advanced Training Technology (Technologie Avancee d’Entrainement au Combat Urbain)

DTIC Science & Technology

2010-04-01

JRTC Joint Readiness Training Center JRTC-MOUT-IS Joint Readiness Training Center Military Operations in Urbanised Terrain Instrumentation System...did not support or identify joint or multi-national requirements for conducting effective military operations in an urbanised environment. Very few...Requirements Document (ORD) for the Joint Readiness Training Center (JRTC) Military Operations on Urbanised Terrain (MOUT) Instrumentation System

An Analysis of Organizational Readiness at Anniston Army Depot for Information Technology Change

DTIC Science & Technology

2008-12-01

13 1. History of Readiness for Change Literature ...................................13 2. Research...the way IT change affects them individually and collectively are the focus of this thesis project. The history of the SDS and the LMP provided in...recommendations based on the survey instrument. 13 II. LITERATURE REVIEW A. INTRODUCTION 1. History of Readiness for Change Literature An

Fuel-Flexible Gasification-Combustion Technology for Production of Hydrogen and Sequestration-Ready Carbon Dioxide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rizeq, George; West, Janice; Frydman, Arnaldo

Electricity produced from hydrogen in fuel cells can be highly efficient relative to competing technologies and has the potential to be virtually pollution free. Thus, fuel cells may become an ideal solution to this nation's energy needs if one has a satisfactory process for producing hydrogen from available energy resources such as coal, and low-cost alternative feedstocks such as biomass. GE EER is developing an innovative fuel-flexible advanced gasification-combustion (AGC) technology for production of hydrogen for fuel cells or combustion turbines, and a separate stream of sequestration-ready CO2. The AGC module can be integrated into a number of Vision- 21more » power systems. It offers increased energy efficiency relative to conventional gasification and combustion systems and near-zero pollution. The R&D on the AGC technology is being conducted under a Vision-21 award from the U.S. DOE NETL with co-funding from GE EER, Southern Illinois University at Carbondale (SIU-C), and the California Energy Commission (CEC). The AGC technology converts coal and air into three separate streams of pure hydrogen, sequestration-ready CO2, and high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The three-year program integrates lab-, bench- and pilot-scale studies to demonstrate the AGC concept. Process and kinetic modeling studies as well as an economic assessment will also be performed. This paper provides an overview of the program and its objectives, and discusses first-year R&D activities, including design of experimental facilities and results from initial tests and modeling studies. In particular, the paper describes the design of the bench-scale facility and initial process modeling data. In addition, a process flow diagram is shown for a complete plant incorporating the AGC module with other Vision-21 plant components to maximize hydrogen production and process efficiency.« less

Ready to Go: Using the EXPLORE Test to Increase 8th Grade Readiness for Success

ERIC Educational Resources Information Center

Rochford, Joseph A.; O'Neill, Adrienne; Gelb, Adele

2010-01-01

During the 2009-10 academic year, 1,444 8th grade students in the Canton City, Plain and Marlington Local School Districts (hereafter called Stark students) took the EXPLORE Test as part of a pilot project, "Ready to Go: Increasing Eighth Grade Readiness," sponsored by the Stark Education Partnership with funding from the Ohio College…

Core Design Characteristics of the Fluoride Salt-Cooled High Temperature Demonstration Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Nicholas R; Qualls, A L; Betzler, Benjamin R

2016-01-01

Fluoride salt-cooled high temperature reactors (FHRs) are a promising reactor technology option with significant knowledge gaps to implementation. One potential approach to address those technology gaps is via a small-scale demonstration reactor with the goal of increasing the technology readiness level (TRL) of the overall system for the longer term. The objective of this paper is to outline a notional concept for such a system, and to address how the proposed concept would advance the TRL of FHR concepts. Development of the proposed FHR Demonstration Reactor (DR) will enable commercial FHR deployment through disruptive and rapid technology development and demonstration.more » The FHR DR will close remaining gaps to commercial viability. Lower risk technologies are included in the initial FHR DR design to ensure that the reactor can be built, licensed, and operated within an acceptable budget and schedule. Important capabilities that will be demonstrated by building and operating the FHR DR include core design methodologies; fabrication and operation of high temperature reactors; salt procurement, handling, maintenance, and ultimate disposal; salt chemistry control to maximize vessel life; tritium management; heat exchanger performance; pump performance; and reactivity control. The FHR DR is considered part of a broader set of FHR technology development and demonstration efforts, some of which are already underway. Nonreactor test efforts (e.g., heated salt loops or loops using simulant fluids) can demonstrate many technologies necessary for commercial deployment of FHRs. The FHR DR, however, fulfills a crucial role in FHR technology development by advancing the technical maturity and readiness level of the system as a whole.« less

An Analysis of Current Research on the Metropolitan Readiness Test and First-Grade Reading Achievement.

ERIC Educational Resources Information Center

Greenlaw, M. Jean; Moore, David

A review of literature by reading authorities identified seven criteria necessary for meaningful research about reading readiness tests. These criteria were then used in analysis of 15 research studies dealing with the "Metropolitan Readiness Test" and first grade reading achievement. Five major findings resulted from this analysis:…

Advanced mirror technology development (AMTD): year five status

NASA Astrophysics Data System (ADS)

Stahl, H. Philip

2017-09-01

The Advanced Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort initiated in Fiscal Year (FY) 2012, to mature the Technology Readiness Level (TRL) of critical technologies required to enable 4-m-orlarger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics, ultra-high-contrast observations of exoplanets, and National Interest missions. Key accomplishments of 2016/17 include the completion of the Harris Corp 150 Hz 1.5-meter Ultra-Low Expansion (ULE) mirror substrate using stacked core method to demonstrate lateral stability of the stacked core technology, as well as the characterization and validation by test of the mechanical and thermal performance of the 1.2-meter Zerodur mirror using the STOP model prediction and verification of CTE homogeneity.

Bringing Together Mentoring, Technology, and Whole-School Reform: A First Look at the iMentor College Ready Program. Technical Appendices

ERIC Educational Resources Information Center

Merrill, Lisa; Siman, Nina; Wulach, Suzanne; Kang, David

2015-01-01

iMentor's College Ready Program is a unique approach that combines elements of school-based mentoring, whole school reform, and technology in an effort to help students develop the full suite of knowledge, behaviors, and skills they need to complete high school and enroll and thrive in college. iMentor partners with high schools that serve…

Bringing Together Mentoring, Technology, and Whole-School Reform: A First Look at the iMentor College Ready Program. Executive Summary

ERIC Educational Resources Information Center

Merrill, Lisa; Siman, Nina; Wulach, Suzanne; Kang, David

2015-01-01

iMentor's College Ready Program is a unique approach that combines elements of school-based mentoring, whole school reform, and technology in an effort to help students develop the full suite of knowledge, behaviors, and skills they need to complete high school and enroll and thrive in college. iMentor partners with high schools that serve…

EPA ENVIRONMENTAL TECHNOLOGY EXPERIENCE

EPA Science Inventory

THE USEPA's Environmental Technology Verification for Metal Finishing Pollution Prevention Technologies (ETV-MF) Program verifies the performance of innovative, commercial-ready technologies designed to improve industry performance and achieve cost-effective pollution prevention ...

Joint Land Attack Cruise Missile Defense Elevated Netted Sensor System Not Ready for Production Decision (REDACTED)

DTIC Science & Technology

2012-09-07

Average Procurement Unit Cost CMDS Cruise Missile Defense Systems CPD Capability Production Document EMD Engineering and Manufacturing...Defense for Acquisition, Technology and Logistics also determined that continuing test and evaluation of the two JLENS Engineering and Manufacturing...Program (Category ID) that was established in January 1996 and, during the audit, was in the Engineering and Manufacturing Development (EMD) phase of

Summary of the Sixth Persh Workshop: Corrosion Policy Guiding Science and Technology

DTIC Science & Technology

2016-01-01

mitigating corrosion. Corrosion affects military readiness, so corrosion prevention and control (CPC) have a high priority for the DOD since CPC is a...resulting in high -cost repairs. Corrosion mitigation is thus a key cost-effective approach for system maintainability and reduced life cycle costs. The... treatments . • Develop corrosion databases and corrosion models for predictive evaluation. Testing methods for realistic prediction of performance

Development of advanced Czochralski growth process to produce low cost 150 kg silicon ingots from a single crucible for technology readiness

NASA Technical Reports Server (NTRS)

1980-01-01

The design and development of an advanced Czochralski crystal grower are described. Several exhaust gas analysis system equipment specifications studied are discussed. Process control requirements were defined and design work began on the melt temperature, melt level, and continuous diameter control. Sensor development included assembly and testing of a bench prototype of a diameter scanner system.

Readiness for Meaningful Use of Health Information Technology and Patient Centered Medical Home Recognition Survey Results

PubMed Central

Shin, Peter; Sharac, Jessica

2013-01-01

Objective Determine the factors that impact HIT use and MU readiness for community health centers (CHCs). Background The HITECH Act allocates funds to Medicaid and Medicare providers to encourage the adoption of electronic health records (EHR), in an effort to improve health care quality and patient outcomes, and to reduce health care costs. Methods We surveyed CHCs on their Readiness for Meaningful Use (MU) of Health Information Technology (HIT) and Patient Centered Medical Home (PCMH) Recognition, then we combined responses with 2009 Uniform Data System data to determine which factors impact use of HIT and MU readiness. Results Nearly 70% of CHCs had full or partial EHR adoption at the time of survey. Results are presented for centers with EHR adoption, by the length of time that their EHR systems have been in operation. PMID:24834365

Bioprinting: an assessment based on manufacturing readiness levels.

PubMed

Wu, Changsheng; Wang, Ben; Zhang, Chuck; Wysk, Richard A; Chen, Yi-Wen

2017-05-01

Over the last decade, bioprinting has emerged as a promising technology in the fields of tissue engineering and regenerative medicine. With recent advances in additive manufacturing, bioprinting is poised to provide patient-specific therapies and new approaches for tissue and organ studies, drug discoveries and even food manufacturing. Manufacturing Readiness Level (MRL) is a method that has been applied to assess manufacturing maturity and to identify risks and gaps in technology-manufacturing transitions. Technology Readiness Level (TRL) is used to evaluate the maturity of a technology. This paper reviews recent advances in bioprinting following the MRL scheme and addresses corresponding MRL levels of engineering challenges and gaps associated with the translation of bioprinting from lab-bench experiments to ultimate full-scale manufacturing of tissues and organs. According to our step-by-step TRL and MRL assessment, after years of rigorous investigation by the biotechnology community, bioprinting is on the cusp of entering the translational phase where laboratory research practices can be scaled up into manufacturing products specifically designed for individual patients.

Readiness factors for information system strategic planning among universities in developing countries: a systematic review

NASA Astrophysics Data System (ADS)

Irfan, M.; Putra, S. J.; Alam, C. N.; Subiyakto, A.; Wahana, A.

2018-03-01

The implementation of information system strategic planning (ISSP) in higher education institutions is to improve work efficiency, management effectiveness in order to improve organizational competitive advantage. However, the question of whether all universities are ready to implement ISSP as a way to achieve organizational goals has not been answered. This study aims to investigate the readiness phenomena through literature study. The method used is by using the Systematic Literature Review (SLR) instrument to identify readiness factors on the implementation of ISSP, especially among the institutions of higher education in developing countries. This study has identified 10 readiness measurement. There are three categories of measurement, namely people, processes and technologies that represent 11 factors of ISSP readiness measurement in universities.

Building Community Bonds, Bridges, and Linkages to Promote the Career Readiness of High School Students in the United States

ERIC Educational Resources Information Center

Hernandez-Gantes, Victor M.; Keighobadi, Sasha; Fletcher, Edward C., Jr.

2018-01-01

The career readiness of high school students has been a longstanding issue that has received renewed attention in recent years. To document an approach to promoting career readiness in the United States, we conducted an exploratory case study of a distinguished information technology career academy. Using the premises of capital building as a…

Final Report of the Impacts of the National Math + Science Initiative's (NMSI's) College Readiness Program on High School Students' Outcomes

ERIC Educational Resources Information Center

Sherman, Dan; Li, Yibing; Darwin, Marlene; Taylor, Suzanne; Song, Mengli

2017-01-01

The National Math + Science Initiative's (NMSI's) College Readiness Program (CRP) is an established program whose goal is to promote science, technology, engineering, and mathematics education in high schools to improve students' readiness for college. It provides teacher, student, and school supports to promote high school students' success in…

College Readiness: The Evaluation of Students Participating in the Historically Black College and University Program in Pre-Calculus and the Calculus Sequence

ERIC Educational Resources Information Center

Hall, Angela Renee

2011-01-01

This investigative research focuses on the level of readiness of Science, Technology, Engineering, and Mathematics (STEM) students entering Historically Black Colleges and Universities (HBCU) in the college Calculus sequence. Calculus is a fundamental course for STEM courses. The level of readiness of the students for Calculus can very well play a…

LWRS ATR Irradiation Testing Readiness Status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kristine Barrett

2012-09-01

The Light Water Reactor Sustainability (LWRS) Program was established by the U.S. Department of Energy Office of Nuclear Energy (DOE-NE) to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of the current reactors. The LWRS Program is divided into four R&D Pathways: (1) Materials Aging and Degradation; (2) Advanced Light Water Reactor Nuclear Fuels; (3) Advanced Instrumentation, Information and Control Systems; and (4) Risk-Informed Safety Margin Characterization. This report describes an irradiation testing readiness analysis in preparation of LWRS experiments for irradiation testing at the Idaho National Laboratory (INL) Advanced Testmore » Reactor (ATR) under Pathway (2). The focus of the Advanced LWR Nuclear Fuels Pathway is to improve the scientific knowledge basis for understanding and predicting fundamental performance of advanced nuclear fuel and cladding in nuclear power plants during both nominal and off-nominal conditions. This information will be applied in the design and development of high-performance, high burn-up fuels with improved safety, cladding integrity, and improved nuclear fuel cycle economics« less

STS-51 preparation: ACTS, ORFEUS, Discovery in VAB

NASA Technical Reports Server (NTRS)

1993-01-01

In NASA's building AM on Cape Canaveral Air Force Station, STS-51 mission specialist Carl Walz (right) and Deutsche Aerospace technician Gregor Dawidowitsch check over the scientific instruments mounted on the Shuttle Pallet Satellite (SPAS) carrier (38573); The Orbiting and Retrievable Far and Extreme Ultraviolet Spectrometer (ORFEUS) and SPAS is readied for hoisting into a test cell at the Vertical Processing Facility (VPF) (38574); Mating of the Advanced Communications Technology Satellite (ACTS) with the Transfer Orbit Stage (TOS) booster is under way in the Payload Hazardous Servicing Facility (PHSF) (38575); The mated ACTS and TOS are ready to be moved from the PHSF to the Vertical Processsing Facility (VPF) (38576); The orbiter Discovery is rolled into the Vehicle Assembly Building (VAB) for mating with the external tank and twin solid rocket boosters (38577-8).

NASA HERMeS Hall Thruster Electrical Configuration Characterization

NASA Technical Reports Server (NTRS)

Peterson, Peter; Kamhawi, Hani; Huang, Wensheng; Yim, John; Herman, Daniel; Williams, George; Gilland, James; Hofer, Richard

2016-01-01

NASAs Hall Effect Rocket with Magnetic Shielding (HERMeS) 12.5 kW Technology Demonstration Unit-1 (TDU-1) Hall thruster has been the subject of extensive technology maturation in preparation for development into a flight ready propulsion system. Part of the technology maturation was to test the TDU-1 thruster in several ground based electrical configurations to assess the thruster robustness and suitability to successful in-space operation. The ground based electrical configuration testing has recently been demonstrated as an important step in understanding and assessing how a Hall thruster may operate differently in space compared to ground based testing, and to determine the best configuration to conduct development and qualification testing. This presentation will cover the electrical configuration testing of the TDU-1 HERMeS Hall thruster in NASA Glenn Research Centers Vacuum Facility 5. The three electrical configurations examined are the thruster body tied to facility ground, thruster floating, and finally the thruster body electrically tied to cathode common. The TDU-1 HERMeS was configured with two different exit plane boundary conditions, dielectric and conducting, to examine the influence on the electrical configuration characterization.

NASA HERMeS Hall Thruster Electrical Configuration Characterization

NASA Technical Reports Server (NTRS)

Peterson, Peter Y.; Kamhawi, Hani; Huang, Wensheng; Yim, John; Herman, Daniel; Williams, George; Gilland, James; Hofer, Richard

2015-01-01

The NASA Hall Effect Rocket with Magnetic Shielding (HERMeS) 12.5 kW Technology Demonstration Unit-1 (TDU-1) Hall thruster has been the subject of extensive technology maturation in preparation for development into a flight ready propulsion system. Part of the technology maturation was to test the TDU-1 thruster in several ground based electrical configurations to assess the thruster robustness and suitability to successful in-space operation. The ground based electrical configuration testing has recently been demonstrated as an important step in understanding and assessing how a Hall thruster may operate differently in-space compared to ground based testing, and to determine the best configuration to conduct development and qualification testing. This paper describes the electrical configuration testing of the HERMeS TDU-1 Hall thruster in NASA Glenn Research Center's Vacuum Facility 5. The three electrical configurations examined were 1) thruster body tied to facility ground, 2) thruster floating, and 3) thruster body electrically tied to cathode common. The HERMeS TDU-1 Hall thruster was also configured with two different exit plane boundary conditions, dielectric and conducting, to examine the influence on the electrical configuration characterization.

Using Technology Readiness Level (TRL), Life Cycle Cost (LCC), and Other Metrics to Supplement Equivalent System Mass (ESM) in Advanced Life Support (ALS)

NASA Technical Reports Server (NTRS)

Jones, Harry

2003-01-01

The ALS project plan goals are reducing cost, improving performance, and achieving flight readiness. ALS selects projects to advance the mission readiness of low cost, high performance technologies. The role of metrics is to help select good projects and report progress. The Equivalent Mass (EM) of a system is the sum of the estimated mass of the hardware, of its required materials and spares, and of the pressurized volume, power supply, and cooling system needed to support the hardware in space. EM is the total payload launch mass needed to provide and support a system. EM is directly proportional to the launch cost.

Challenging Technology, and Technology Infusion into 21st Century

NASA Technical Reports Server (NTRS)

Chau, S. N.; Hunter, D. J.

2001-01-01

In preparing for the space exploration challenges of the next century, the National Aeronautics and Space Administration (NASA) Center for Integrated Space Micro-Systems (CISM) is chartered to develop advanced spacecraft systems that can be adapted for a large spectrum of future space missions. Enabling this task are revolutions in the miniaturization of electrical, mechanical, and computational functions. On the other hand, these revolutionary technologies usually have much lower readiness levels than those required by flight projects. The mission of the Advanced Micro Spacecraft (AMS) task in CISM is to bridge the readiness gap between advanced technologies and flight projects. Additional information is contained in the original extended abstract.

Using Readiness Tests To Route Kindergarten Students: The Snarled Intersection of Psychometrics, Policy, and Practice.

ERIC Educational Resources Information Center

Ellwein, Mary Catherine; And Others

The validity of inferences drawn from readiness tests used to place children in a regular or a 2-year kindergarten program was investigated. Data from nine school districts in Virginia were used in the study. The study explored technical characteristics of four commonly used readiness tests: the Brigance Kindergarten and First Grade Screen, the…

NASA Development of Aerocapture Technologies

NASA Technical Reports Server (NTRS)

James, Bonnie; Munk, Michelle; Moon, Steve

2003-01-01

Aeroassist technology development is a vital part of the NASA ln-Space Propulsion Program (ISP), which is managed by the NASA Headquarters Office of Space Science, and implemented by the Marshall Space Flight Center in Huntsville, Alabama. Aeroassist is the general term given to various techniques to maneuver a space vehicle within an atmosphere, using aerodynamic forces in lieu of propulsive fuel. Within the ISP, the current aeroassist technology development focus is aerocapture. The objective of the ISP Aerocapture Technology Project (ATP) is to develop technologies that can enable and/or benefit NASA science missions by significantly reducing cost, mass, and/or travel times. To accomplish this objective, the ATP identifies and prioritizes the most promising technologies using systems analysis, technology advancement and peer review, coupled with NASA Headquarters Office of Space Science target requirements. Plans are focused on developing mid-Technology Readiness Level (TRL) technologies to TRL 6 (ready for technology demonstration in space).

NASA Development of Aerocapture Technologies

NASA Technical Reports Server (NTRS)

James, Bonnie; Munk, Michelle; Moon, Steve

2004-01-01

Aeroassist technology development is a vital part of the NASA In-Space Propulsion Program (ISP), which is managed by the NASA Headquarters Office of Space Science, and implemented by the Marshall Space Flight Center in Huntsville, Alabama. Aeroassist is the general term given to various techniques to maneuver a space vehicle within an atmosphere, using aerodynamic forces in lieu of propulsive fuel. Within the ISP, the current aeroassist technology development focus is aerocapture. The objective of the ISP Aerocapture Technology Project (ATP) is to develop technologies that can enable and/or benefit NASA science missions by significantly reducing cost, mass, and/or travel times. To accomplish this objective, the ATP identifies and prioritizes the most promising technologies using systems analysis, technology advancement and peer review, coupled with NASA Headquarters Office of Space Science target requirements. Plans are focused on developing mid-Technology Readiness Level (TRL) technologies to TRL 6 (ready for technology demonstration in space).

Measuring School Readiness: Conceptual and Practical Considerations

ERIC Educational Resources Information Center

Snow, Kyle L.

2006-01-01

Recent interest and investment in early childhood education as a means of promoting children's school readiness has prompted the need for clear definitions of school readiness. Traditionally school readiness has been viewed within a maturationist frame, based on a chronological set-point, which led to the emergence of readiness testing. Following…

Staged, High-Pressure Oxy-Combustion Technology: Development and Scale-Up

DOE Office of Scientific and Technical Information (OSTI.GOV)

Axelbaum, Richard; Kumfer, Benjamin; Gopan, Akshay

The immediate need for a high efficiency, low cost carbon capture process has prompted the recent development of pressurized oxy-combustion. With a greater combustion pressure the dew point of the flue gas is increased, allowing for effective integration of the latent heat of flue gas moisture into the Rankine cycle. This increases the net plant efficiency and reduces costs. A novel, transformational process, named Staged, Pressurized Oxy-Combustion (SPOC), achieves additional step changes in efficiency and cost reduction by significantly reducing the recycle of flue gas. The research and development activities conducted under Phases I and II of this project (FE0009702)more » include: SPOC power plant cost and performance modeling, CFD-assisted design of pressurized SPOC boilers, theoretical analysis of radiant heat transfer and ash deposition, boiler materials corrosion testing, construction of a 100 kWth POC test facility, and experimental testing. The results of this project have advanced the technology readiness level (TRL) of the SPOC technology from 1 to 5.« less

Getting a Technology-based Diabetes Intervention Ready for Primetime: A Review of Usability Testing Studies

PubMed Central

Lyles, Courtney R.; Sarkar, Urmimala; Osborn, Chandra Y.

2014-01-01

Consumer health technologies can educate patients about diabetes and support their self-management, yet usability evidence is rarely published even though it determines patient engagement, optimal benefit of any intervention, and an understanding of generalizability. Therefore, we conducted a narrative review of peer-reviewed articles published from 2009–2013 that tested the usability of a web- or mobile-delivered system/application designed to educate and support patients with diabetes. Overall, the 23 papers included in our review used mixed (n=11), descriptive quantitative (n=9), and qualitative methods (n=3) to assess usability, such as documenting which features performed as intended and how patients rated their experiences. More sophisticated usability evaluations combined several complementary approaches to elucidate more aspects of functionality. Future work pertaining to the design and evaluation of technology-delivered diabetes education/support interventions should aim to standardize the usability testing processes, and publish usability findings to inform interpretation of why an intervention succeeded or failed, and for whom. PMID:25173689

Using Technology to Enhance Discharge Teaching and Improve Coping for Patients After Stroke.

PubMed

Schneider, Melissa A; Howard, Katrina A

2017-06-01

A diagnosis of stroke is a life-changing event. Effective discharge teaching after a stroke is crucial for recovery, but the overload of information can be overwhelming for patients and caregivers. The purpose of this study was to examine differences in discharge readiness and postdischarge coping in patients admitted for stroke after the use of individualized postdischarge information/education provided via a technology package (including patient online portal access, e-mail/secure messaging) compared with current standard discharge teaching methods (verbal/written instructions). This study used a descriptive comparative design to evaluate the difference between the nonintervention group A and the intervention group B. Patients in group B received additional discharge information via secured e-mail messaging at postdischarge days 2, 6, and 10. Two validated tools, Readiness for Hospital Discharge Form and Post-Discharge Coping Difficulty Scale, were used. One hundred patients were recruited for the study, but the final number of complete data sets collected was 86-42 in group A and 44 in group B. There was no statistically significant difference between the groups in discharge readiness. There was a significant difference in coping scores between the 2 groups, with the technology group exhibiting higher coping. New technology affords new options to improve discharge readiness and contribute to positive patient coping after stroke. The researchers hope that this study will contribute to the growing body of evidence showing success using aspects of technology to enhance discharge teaching and follow-up after discharge.

Skylab rescue space vehicle flight readiness test

NASA Technical Reports Server (NTRS)

Jevitt, S. J.

1973-01-01

A Skylab Rescue Space Vehicle flight readiness test is described which ensures that space vehicle systems are in a state of flight readiness and are compatible with associated ground support equipment. The functions of propellant loading, umbilical ejection, ignition, holddown arm release, liftoff, and service arm and tail service mast retraction are simulated. The test outline is presented along with a list of references, intercommunications information, operations interface control chart, and flight test.

New Developments in the Technology Readiness Assessment Process in US DOE-EM - 13247

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krahn, Steven; Sutter, Herbert; Johnson, Hoyt

2013-07-01

A Technology Readiness Assessment (TRA) is a systematic, metric-based process and accompanying report that evaluates the maturity of the technologies used in systems; it is designed to measure technology maturity using the Technology Readiness Level (TRL) scale pioneered by the National Aeronautics and Space Administration (NASA) in the 1980's. More recently, DoD has adopted and provided systematic guidance for performing TRAs and determining TRLs. In 2007 the GAO recommended that the DOE adopt the NASA/DoD methodology for evaluating technology maturity. Earlier, in 2006-2007, DOE-EM had conducted pilot TRAs on a number of projects at Hanford and Savannah River. In Marchmore » 2008, DOE-EM issued a process guide, which established TRAs as an integral part of DOE-EM's Project Management Critical Decision Process. Since the development of its detailed TRA guidance in 2008, DOE-EM has continued to accumulate experience in the conduct of TRAs and the process for evaluating technology maturity. DOE has developed guidance on TRAs applicable department-wide. DOE-EM's experience with the TRA process, the evaluations that led to recently developed proposed revisions to the DOE-EM TRA/TMP Guide; the content of the proposed changes that incorporate the above lessons learned and insights are described. (authors)« less

Solar Thermal Upper Stage Liquid Hydrogen Pressure Control Testing

NASA Technical Reports Server (NTRS)

Moore, J. D.; Otto, J. M.; Cody, J. C.; Hastings, L. J.; Bryant, C. B.; Gautney, T. T.

2015-01-01

High-energy cryogenic propellant is an essential element in future space exploration programs. Therefore, NASA and its industrial partners are committed to an advanced development/technology program that will broaden the experience base for the entire cryogenic fluid management community. Furthermore, the high cost of microgravity experiments has motivated NASA to establish government/aerospace industry teams to aggressively explore combinations of ground testing and analytical modeling to the greatest extent possible, thereby benefitting both industry and government entities. One such team consisting of ManTech SRS, Inc., Edwards Air Force Base, and Marshall Space Flight Center (MSFC) was formed to pursue a technology project designed to demonstrate technology readiness for an SRS liquid hydrogen (LH2) in-space propellant management concept. The subject testing was cooperatively performed June 21-30, 2000, through a partially reimbursable Space Act Agreement between SRS, MSFC, and the Air Force Research Laboratory. The joint statement of work used to guide the technical activity is presented in appendix A. The key elements of the SRS concept consisted of an LH2 storage and supply system that used all of the vented H2 for solar engine thrusting, accommodated pressure control without a thermodynamic vent system (TVS), and minimized or eliminated the need for a capillary liquid acquisition device (LAD). The strategy was to balance the LH2 storage tank pressure control requirements with the engine thrusting requirements to selectively provide either liquid or vapor H2 at a controlled rate to a solar thermal engine in the low-gravity environment of space operations. The overall test objective was to verify that the proposed concept could enable simultaneous control of LH2 tank pressure and feed system flow to the thruster without necessitating a TVS and a capillary LAD. The primary program objectives were designed to demonstrate technology readiness of the SRS concept at a system level as a first step toward actual flight vehicle demonstrations. More specific objectives included testing the pressure and feed control system concept hardware for functionality, operability, and performance. Valuable LH2 thermodynamic and fluid dynamics data were obtained for application to both the SRS concept and to future missions requiring space-based cryogen propellant management.

The Effectiveness of Four Readiness Tests As Predictors of First Grade Academic Achievement

ERIC Educational Resources Information Center

Telegdy, Gabriel A.

1975-01-01

Results suggest that the STAR or MRT, coupled with teacher observations and the BGT, can provide a school system with an adequate screening readiness battery. Of the several skills measured by readiness tests, letter knowledge is the most predictive of actual first grade achievement. (Author)

Factors Affecting Nursing Students' Readiness and Perceptions Toward the Use of Mobile Technologies for Learning.

PubMed

Zayim, Nese; Ozel, Deniz

2015-10-01

The purpose of this study was to determine the current usage of mobile devices, preferences of mobile learning environments and examine the readiness of nursing students in a public university. In order to investigate preferences and attitudes with respect to mobile technology use in nursing education, 387 students at a state university have been surveyed. It has been observed that while students preferred their current portable laptops, those in higher classes were more inclined to favor mobile phones. The common problems of battery life and high cost of communication, both in smartphones and tablet systems, suggest that hardware quality and financial constraints seem to be two main factors in determining these technologies. While more than half of students expressed readiness for mobile learning, one quarter indicated indecision. Through multivariate regression analysis, readiness to use mobile learning can be described in terms of perceived ease of use, perceived usefulness, personal innovativeness, self-management of learning, perceived device limitation, and availability. Class level, perceived ease of use, personal innovativeness, and self-management of learning explain intention to use mobile learning. Findings obtained from these results can provide guidance in the development and application of mobile learning systems.

Using space for technology development - Planning for the Space Station era

NASA Technical Reports Server (NTRS)

Ambrus, Judith H.; Couch, Lana M.; Rosen, Robert R.; Gartrell, Charles F.

1989-01-01

Experience with the Shuttle and free-flying satellites as technology test-beds has shown the feasibility and desirability of using space assets as a facility for technology development. Thus, by the time the Space Station era will have arrived, the technologist will be ready for an accessible engineering facility in space. As the 21st century is approached, it is expected that virtually every flight to the Space Station Freedom will be required to carry one or more research, technology, and engineering experiments. The experiments planned will utilize both the pressurized volume, and the external payload attachment facilities. A unique, but extremely important, class of experiments will use the Space Station itself as an experimental vehicle. Based upon recent examination of possible Space Station Freedom assembly sequences, technology payloads may well utilize 20-30 percent of available resources.

Advanced Mirror Technology Development (AMTD): Year Five Status

NASA Technical Reports Server (NTRS)

Stahl, H Philip

2017-01-01

The Advanced Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort initiated in Fiscal Year (FY) 2012, to mature the Technology Readiness Level (TRL) of critical technologies required to enable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics, ultra-high-contrast observations of exoplanets, and National Interest missions. Key accomplishments of 2016/17 include the completion of the Harris Corp approximately 150 Hz 1.5-meter Ultra-Low Expansion (ULE Registered trademark) mirror substrate using stacked core method to demonstrate lateral stability of the stacked core technology, as well as the characterization and validation by test of the mechanical and thermal performance of the 1.2-meter Zerodur (Registered trademark) mirror using the STOP model prediction and verification of CTE homogeneity.

Compact Ceramic Microchannel Heat Exchangers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewinsohn, Charles

The objective of the proposed work was to demonstrate the feasibility of a step change in power plant efficiency at a commercially viable cost, by obtaining performance data for prototype, compact, ceramic microchannel heat exchangers. By performing the tasks described in the initial proposal, all of the milestones were met. The work performed will advance the technology from Technology Readiness Level 3 (TRL 3) to Technology Readiness Level 4 (TRL 4) and validate the potential of using these heat exchangers for enabling high efficiency solid oxide fuel cell (SOFC) or high-temperature turbine-based power plants. The attached report will describe howmore » this objective was met. In collaboration with The Colorado School of Mines (CSM), specifications were developed for a high temperature heat exchanger for three commercial microturbines. Microturbines were selected because they are a more mature commercial technology than SOFC, they are a low-volume and high-value target for market entry of high-temperature heat exchangers, and they are essentially scaled-down versions of turbines used in utility-scale power plants. Using these specifications, microchannel dimensions were selected to meet the performance requirements. Ceramic plates were fabricated with microchannels of these dimensions. The plates were tested at room temperature and elevated temperature. Plates were joined together to make modular, heat exchanger stacks that were tested at a variety of temperatures and flow rates. Although gas flow rates equivalent to those in microturbines could not be achieved in the laboratory environment, the results showed expected efficiencies, robust operation under significant temperature gradients at high temperature, and the ability to cycle the stacks. Details of the methods and results are presented in this final report.« less

Modular Rocket Engine Control Software (MRECS)

NASA Technical Reports Server (NTRS)

Tarrant, C.; Crook, J.

1998-01-01

The Modular Rocket Engine Control Software (MRECS) Program is a technology demonstration effort designed to advance the state-of-the-art in launch vehicle propulsion systems. Its emphasis is on developing and demonstrating a modular software architecture for advanced engine control systems that will result in lower software maintenance (operations) costs. It effectively accommodates software requirement changes that occur due to hardware technology upgrades and engine development testing. Ground rules directed by MSFC were to optimize modularity and implement the software in the Ada programming language. MRECS system software and the software development environment utilize Commercial-Off-the-Shelf (COTS) products. This paper presents the objectives, benefits, and status of the program. The software architecture, design, and development environment are described. MRECS tasks are defined and timing relationships given. Major accomplishments are listed. MRECS offers benefits to a wide variety of advanced technology programs in the areas of modular software architecture, reuse software, and reduced software reverification time related to software changes. MRECS was recently modified to support a Space Shuttle Main Engine (SSME) hot-fire test. Cold Flow and Flight Readiness Testing were completed before the test was cancelled. Currently, the program is focused on supporting NASA MSFC in accomplishing development testing of the Fastrac Engine, part of NASA's Low Cost Technologies (LCT) Program. MRECS will be used for all engine development testing.

Two Micron Laser Technology Advancements at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Singh, Upendra N.

2010-01-01

An Independent Laser Review Panel set up to examine NASA s space-based lidar missions and the technology readiness of lasers appropriate for space-based lidars indicated a critical need for an integrated research and development strategy to move laser transmitter technology from low technical readiness levels to the higher levels required for space missions. Based on the review, a multiyear Laser Risk Reduction Program (LRRP) was initiated by NASA in 2002 to develop technologies that ensure the successful development of the broad range of lidar missions envisioned by NASA. This presentation will provide an overview of the development of pulsed 2-micron solid-state laser technologies at NASA Langley Research Center for enabling space-based measurement of wind and carbon dioxide.

Fall 2014 Data-Intensive Systems

DTIC Science & Technology

2014-10-29

Oct 2014 © 2014 Carnegie Mellon University Big Data Systems NoSQL and horizontal scaling are changing architecture principles by creating...University Status LEAP4BD • Ready to pilot QuABase • Prototype is complete – covers 8 NoSQL /NewSQL implementations • Completing validation testing Big...machine learning to automate population of knowledge base • Initial focus on NoSQL /NewSQL technology domain • Extend to create knowledge bases in other

Can a pile of scrap unmask a new high technology? The A4/V-2 No V89 Bäckebo-torpeden

NASA Astrophysics Data System (ADS)

Ingemar Skoog, A.

2013-04-01

Three months before the first V-2 rocket attack on London a test vehicle crashed in southern Sweden on June 13, 1944. At this time the Allied only had limited knowledge about the rocket (A4/V-2) from agent reports and information from the Polish resistance investigating some remains from a crashed test vehicle in Poland. London was confronted with a new weapon supposedly able to carry an explosive warhead of several tons some 250 km. The A4/V-2 rocket test vehicle number V89 broke apart shortly before impacting ground. In a short time 2 t of metal parts and electrical equipment was collected and transported to Stockholm for investigations. A first Swedish report was ready by July 21, 1944 and the rocket parts were then transported to England for further investigations. By August 18, 1944 the Royal Aircraft Establishment (RAE) had its preliminary report ready. But how close to reality can a complex vehicle be reconstructed and the performance calculated from a pile of scrap by investigators dealing with a technology not seen before? In the early 1940s the state of art of liquid propellant rocket technology outside Germany was limited and the size of a liquid rocket engine for the likely performance hardly imaginable. The Swedish and British reports, at that time classified as top secret, have since been released and permit a very detailed analysis of the task to reconstruct the rocket vehicle, the engine itself and its performance. An assessment of the occurrence at Peenemünde and how the rocket became astray and fell in southern Sweden, together with the analyses by Swedish and British military investigators give a unique insight into the true nature of the V89. It shows the real capabilities of early aeronautical accident investigation methods in combination with solid engineering knowledge to unmask a new high technology.

Vehicle-to-vehicle communications : readiness of V2V technology for application.

DOT National Transportation Integrated Search

2014-08-01

The purpose of this research report is to assess the readiness for application of vehicle-to-vehicle (V2V) : communications, a system designed to transmit basic safety information between vehicles to facilitate warnings to : drivers concerning impend...

QuEST: Qualifying Environmentally Sustainable Technologies. Volume 2

NASA Technical Reports Server (NTRS)

Brown, Christina (Editor)

2007-01-01

TEERM focuses its validation efforts on technologies that have shown promise in laboratory testing, but lack testing under realistic or field environment. Mature technologies have advantages over those that are still in the developmental stage such as being more likely to be transitioned into a working environment. One way TEERM begins to evaluate the suitability of technologies is through Technology Readiness Levels (TRLs). TRLs are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. TEERM generally works on demonstrating/validating alternatives that fall within TRLs 5-9. In instances where a mature technology does not exist for a particular Agency application, TEERM works with technology development groups and programs such as NASA's Innovative Partnerships Program (IPP). The IPP's purpose is to identify and document available technologies in light of NASA's needs, evaluate and prioritize those technologies, and reach out to find new partners. All TEERM projects involve multiple partners. Partnering reduces duplication of effort that otherwise might occur if individuals worked their problems alone. Partnering also helps reduce individual contributors' shares of the total cost of technology validation. Through collaboration and financial commitment from project stakeholders and third-party sources, it is possible to fully fund expensive demonstration/validation efforts.

Use of Residual Solids from Pulp and Paper Mills for Enhancing Strength and Durability of Ready-Mixed Concrete

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarun R. Naik; Yoon-moon Chun; Rudolph N. Kraus

2003-09-18

This research was conducted to establish mixture proportioning and production technologies for ready-mixed concrete containing pulp and paper mill residual solids and to study technical, economical, and performance benefits of using the residual solids in the concrete. Fibrous residuals generated from pulp and paper mills were used, and concrete mixture proportions and productions technologies were first optimized under controlled laboratory conditions. Based on the mixture proportions established in the laboratory, prototype field concrete mixtures were manufactured at a ready-mixed concrete plant. Afterward, a field construction demonstration was held to demonstrate the production and placement of structural-grade cold-weather-resistant concrete containing residualmore » solids.« less

Service quality and perceived value of technology-based service encounters: evaluation of clinical staff satisfaction in Taiwan.

PubMed

Hung, Chung-Jye; Chang, Hsin Hsin; Eng, Cheng Joo; Wong, Kit Hong

Previous research has evaluated technology-based service encounters (TBSEs) in the delivery of health care by assessing patient satisfaction. This study examined service quality and perceived value of TBSEs used in health organisations from the perspective of clinical staff, with staff technology readiness as a moderator. A quantitative survey was conducted in Taiwan, across private and public healthcare organisations. Results showed that TBSEs had a direct effect on service quality and perceived value, which in turn had a direct effect on staff satisfaction in using TBSEs. However, service quality had no effect on perceived value when moderated by technology readiness. Theoretical and managerial implications of these findings are discussed.

Design and Test Plans for a Non-Nuclear Fission Power System Technology Demonstration Unit

NASA Technical Reports Server (NTRS)

Mason, Lee; Palac, Donald; Gibson, Marc; Houts, Michael; Warren, John; Werner, James; Poston, David; Qualls, Arthur Lou; Radel, Ross; Harlow, Scott

2012-01-01

A joint National Aeronautics and Space Administration (NASA) and Department of Energy (DOE) team is developing concepts and technologies for affordable nuclear Fission Power Systems (FPSs) to support future exploration missions. A key deliverable is the Technology Demonstration Unit (TDU). The TDU will assemble the major elements of a notional FPS with a non-nuclear reactor simulator (Rx Sim) and demonstrate system-level performance in thermal vacuum. The Rx Sim includes an electrical resistance heat source and a liquid metal heat transport loop that simulates the reactor thermal interface and expected dynamic response. A power conversion unit (PCU) generates electric power utilizing the liquid metal heat source and rejects waste heat to a heat rejection system (HRS). The HRS includes a pumped water heat removal loop coupled to radiator panels suspended in the thermal-vacuum facility. The basic test plan is to subject the system to realistic operating conditions and gather data to evaluate performance sensitivity, control stability, and response characteristics. Upon completion of the testing, the technology is expected to satisfy the requirements for Technology Readiness Level 6 (System Demonstration in an Operational and Relevant Environment) based on the use of high-fidelity hardware and prototypic software tested under realistic conditions and correlated with analytical predictions.

Design and Test Plans for a Non-Nuclear Fission Power System Technology Demonstration Unit

NASA Astrophysics Data System (ADS)

Mason, L.; Palac, D.; Gibson, M.; Houts, M.; Warren, J.; Werner, J.; Poston, D.; Qualls, L.; Radel, R.; Harlow, S.

A joint National Aeronautics and Space Administration (NASA) and Department of Energy (DOE) team is developing concepts and technologies for affordable nuclear Fission Power Systems (FPSs) to support future exploration missions. A key deliverable is the Technology Demonstration Unit (TDU). The TDU will assemble the major elements of a notional FPS with a non-nuclear reactor simulator (Rx Sim) and demonstrate system-level performance in thermal vacuum. The Rx Sim includes an electrical resistance heat source and a liquid metal heat transport loop that simulates the reactor thermal interface and expected dynamic response. A power conversion unit (PCU) generates electric power utilizing the liquid metal heat source and rejects waste heat to a heat rejection system (HRS). The HRS includes a pumped water heat removal loop coupled to radiator panels suspended in the thermal-vacuum facility. The basic test plan is to subject the system to realistic operating conditions and gather data to evaluate performance sensitivity, control stability, and response characteristics. Upon completion of the testing, the technology is expected to satisfy the requirements for Technology Readiness Level 6 (System Demonstration in an Operational and Relevant Environment) based on the use of high-fidelity hardware and prototypic software tested under realistic conditions and correlated with analytical predictions.

Gossamer-1: Mission concept and technology for a controlled deployment of gossamer spacecraft

NASA Astrophysics Data System (ADS)

Seefeldt, Patric; Spietz, Peter; Sproewitz, Tom; Grundmann, Jan Thimo; Hillebrandt, Martin; Hobbie, Catherin; Ruffer, Michael; Straubel, Marco; Tóth, Norbert; Zander, Martin

2017-01-01

Gossamer structures for innovative space applications, such as solar sails, require technology that allows their controlled and thereby safe deployment. Before employing such technology for a dedicated science mission, it is desirable, if not necessary, to demonstrate its reliability with a Technology Readiness Level (TRL) of six or higher. The aim of the work presented here is to provide reliable technology that enables the controlled deployment and verification of its functionality with various laboratory tests, thereby qualifying the hardware for a first demonstration in low Earth orbit (LEO). The development was made in the Gossamer-1 project of the German Aerospace Center (DLR). This paper provides an overview of the Gossamer-1 mission and hardware development. The system is designed based on the requirements of a technology demonstration mission. The design rests on a crossed boom configuration with triangular sail segments. Employing engineering models, all aspects of the deployment were tested under ambient environment. Several components were also subjected to environmental qualification testing. An innovative stowing and deployment strategy for a controlled deployment, as well as the designs of the bus system, mechanisms and electronics are described. The tests conducted provide insights into the deployment process and allow a mechanical characterization of that deployment process, in particular the measurement of the deployment forces. Deployment on system level could be successfully demonstrated to be robust and controllable. The deployment technology is on TRL four approaching level five, with a qualification model for environmental testing currently being built.

Readiness Review of BWXT for Fabrication of AGR 5/6/7 Compacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, Douglas William; Sharp, Michelle Tracy

In support of preparations for fabricating compacts for the Advanced Gas Reactor (AGR) fuel qualification irradiation experiments (AGR-5/6/7), Idaho National Laboratory (INL) conducted a readiness review of the BWX Technology (BWXT) procedures, processes, and equipment associated with compact fabrication activities at the BWXT Nuclear Operations Group (BWXT-NOG) facility outside Lynchburg, VirginiaVA. The readiness review used quality assurance requirements taken from the American Society of Mechanical Engineers (ASME) Nuclear Quality Assurance Standard (NQA-1-2008/1a-2009) as a basis to assess readiness to start compact fabrication.

Liquid biopsy genotyping in lung cancer: ready for clinical utility?

PubMed

Huang, Wei-Lun; Chen, Yi-Lin; Yang, Szu-Chun; Ho, Chung-Liang; Wei, Fang; Wong, David T; Su, Wu-Chou; Lin, Chien-Chung

2017-03-14

Liquid biopsy is a blood test that detects evidence of cancer cells or tumor DNA in the circulation. Despite complicated collection methods and the requirement for technique-dependent platforms, it has generated substantial interest due, in part, to its potential to detect driver oncogenes such as epidermal growth factor receptor (EGFR) mutants in lung cancer. This technology is advancing rapidly and is being incorporated into numerous EGFR tyrosine kinase inhibitor (EGFR-TKI) development programs. It appears ready for integration into clinical care. Recent studies have demonstrated that biological fluids such as saliva and urine can also be used for detecting EGFR mutant DNA through application other user-friendly techniques. This review focuses on the clinical application of liquid biopsies to lung cancer genotyping, including EGFR and other targets of genotype-directed therapy and compares multiple platforms used for liquid biopsy.

Automotive Stirling engine Market and Industrial Readiness Program (MIRP), phase 1

NASA Astrophysics Data System (ADS)

1982-05-01

A program, begun in 1978, has the goal of transferring Stirling engine technology from United Stirling of Sweden to the US and, then, following design, fabrication, and prototype testing, to secure US manufacturers for the engine. The ultimate objective is the large-scale commercial use of the Automotive Stirling Engine (ASE) by the year 2000. The fist phase of the Market and Industrial Readiness Program for the ASE was concerned with defining the market, product, economic and technical factors necessary to be addressed to assure a reasonable chance of ultimate commercial acceptance. Program results for this first phase are reported and discussed. These results pertain to licensing strategy development, economic analysis, market factors, product planning, market growth, cost studies, and engine performance as measured by fuel economy using conventional fuels and by vehicle speed and acceleration characteristics.

Comparison of the performance of first-grade and mentally retarded students on the Peabody Mathematics Readiness Test.

PubMed

Richardson, L I; Thurman, R L; Bassler, O C

1978-07-01

The Peabody Mathematics Readiness Test was developed to assess mathematics readiness and identify children who would encounter difficulty in first-grade mathematics. In the present study, we compared performances of mentally retarded subjects and first-grade subjects on this test. Retarded subjects' mean scores were significantly lower than those of the nonretarded subjects on the drawing test; however, there were no significant differences between the mean scores of the groups on the other five subscales.

Large-scale Advanced Prop-fan (LAP) technology assessment report

NASA Technical Reports Server (NTRS)

Degeorge, C. L.

1988-01-01

The technologically significant findings and accomplishments of the Large Scale Advanced Prop-Fan (LAP) program in the areas of aerodynamics, aeroelasticity, acoustics and materials and fabrication are described. The extent to which the program goals related to these disciplines were achieved is discussed, and recommendations for additional research are presented. The LAP program consisted of the design, manufacture and testing of a near full-scale Prop-Fan or advanced turboprop capable of operating efficiently at speeds to Mach .8. An aeroelastically scaled model of the LAP was also designed and fabricated. The goal of the program was to acquire data on Prop-Fan performance that would indicate the technology readiness of Prop-Fans for practical applications in commercial and military aviation.

NASA Redox system development project status

NASA Technical Reports Server (NTRS)

Nice, A. W.

1981-01-01

NASA-Redox energy storage systems developed for solar power applications and utility load leveling applications are discussed. The major objective of the project is to establish the technology readiness of Redox energy storage for transfer to industry for product development and commercialization by industry. The approach is to competitively contract to design, build, and test Redox systems progressively from preprototype to prototype multi-kW and megawatt systems and conduct supporting technology advancement tasks. The Redox electrode and membrane are fully adequate for multi-kW solar related applications and the viability of the Redox system technology as demonstrated for multi-kW solar related applications. The status of the NASA Redox Storage System Project is described along with the goals and objectives of the project elements.

In-situ response time testing of thermocouples

NASA Astrophysics Data System (ADS)

Hashemian, H. M.; Petersen, K. M.; Hashemian, M.; Beverly, D. D.; Miller, L. F.

The Loop Current Step Response (LCSR) method has been developed for in situ response time testing of thermocouples and resistance thermometers. A means for measuring the sensor response for actual operating conditions and installation details is provided. This technology is ready to be assembled into an instrument for use in aerospace, nuclear, chemical and other industries where transient temperature measurements are important. The method provides time constant results within better than about 20 percent of value obtained from plunge tests. These results are based on tests performed in water at low flow rates (1M/sec) and in air flow rates ranging from a few meters per second to over a hundred kilometers per hour.

Thermal Environmental Testing of NSTAR Engineering Model Ion Thrusters

NASA Technical Reports Server (NTRS)

Rawlin, Vincent K.; Patterson, Michael J.; Becker, Raymond A.

1999-01-01

NASA's New Millenium program will fly a xenon ion propulsion system on the Deep Space 1 Mission. Tests were conducted under NASA's Solar Electric Propulsion Technology Applications Readiness (NSTAR) Program with 3 different engineering model ion thrusters to determine thruster thermal characteristics over the NSTAR operating range in a variety of thermal environments. A liquid nitrogen-cooled shroud was used to cold-soak the thruster to -120 C. Initial tests were performed prior to a mature spacecraft design. Those results and the final, severe, requirements mandated by the spacecraft led to several changes to the basic thermal design. These changes were incorporated into a final design and tested over a wide range of environmental conditions.

Use of computerized neuropsychological testing to help determine fitness to return to combat operations when taking medication that can influence cognitive function.

PubMed

McLay, Robert; Spira, James; Reeves, Dennis

2010-12-01

Nowhere is it more important to maintain peek mental functioning than in a combat zone. Conditions ranging from pain to head injury to post-traumatic stress disorder can cause impairments in neuropsychological function and place service members at risk. Medications can sometimes help alleviate these problems, but also have the risk of further slowing cognitive function or impairing reaction time. Standard methods of neuropsychological testing are often not available in a combat environment. New technologies are being advanced that can allow portable, computerized neuropsychological testing to be performed at almost any location. We present a case that demonstrates how the use of such handheld technology can assist a military physician in assessing the influence of medication on reaction time and in determining if and when a service member is ready to return to combat.

Smart sensor technology for advanced launch vehicles

NASA Astrophysics Data System (ADS)

Schoess, Jeff

1989-07-01

Next-generation advanced launch vehicles will require improved use of sensor data and the management of multisensor resources to achieve automated preflight checkout, prelaunch readiness assessment and vehicle inflight condition monitoring. Smart sensor technology is a key component in meeting these needs. This paper describes the development of a smart sensor-based condition monitoring system concept referred to as the Distributed Sensor Architecture. A significant event and anomaly detection scheme that provides real-time condition assessment and fault diagnosis of advanced launch system rocket engines is described. The design and flight test of a smart autonomous sensor for Space Shuttle structural integrity health monitoring is presented.

LOBSTER: new space x-ray telescopes

NASA Astrophysics Data System (ADS)

Hudec, R.; Sveda, L.; Pína, L.; Inneman, A.; Semencova, V.; Skulinova, M.

2017-11-01

The LOBSTER telescopes are based on the optical arrangement of the lobster eye. The main difference from classical X-ray space telescopes in wide use is the very large field of view while the use of optics results in higher efficiency if compared with detectors without optics. Recent innovative technologies have enabled to design, to develop and to test first prototypes. They will provide deep sensitive survey of the sky in X-rays for the first time which is essential for both long-term monitoring of celestial high-energy sources as well as in understanding transient phenomena. The technology is now ready for applications in space.

Advanced sensors and instrumentation

NASA Technical Reports Server (NTRS)

Calloway, Raymond S.; Zimmerman, Joe E.; Douglas, Kevin R.; Morrison, Rusty

1990-01-01

NASA is currently investigating the readiness of Advanced Sensors and Instrumentation to meet the requirements of new initiatives in space. The following technical objectives and technologies are briefly discussed: smart and nonintrusive sensors; onboard signal and data processing; high capacity and rate adaptive data acquisition systems; onboard computing; high capacity and rate onboard storage; efficient onboard data distribution; high capacity telemetry; ground and flight test support instrumentation; power distribution; and workstations, video/lighting. The requirements for high fidelity data (accuracy, frequency, quantity, spatial resolution) in hostile environments will continue to push the technology developers and users to extend the performance of their products and to develop new generations.

Timing is everything :

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kobos, Peter Holmes; Walker, La Tonya Nicole; Malczynski, Leonard A.

People save for retirement throughout their career because it is virtually impossible to save all youll need in retirement the year before you retire. Similarly, without installing incremental amounts of clean fossil, renewable or transformative energy technologies throughout the coming decades, a radical and immediate change will be near impossible the year before a policy goal is set to be in place. Therefore, our research question is, To meet our desired technical and policy goals, what are the factors that affect the rate we must install technology to achieve these goals in the coming decades? Existing models do not includemore » full regulatory constraints due to their often complex, and inflexible approaches to solve for optimal engineering instead of robust and multidisciplinary solutions. This project outlines the theory and then develops an applied software tool to model the laboratory-to-market transition using the traditional technology readiness level (TRL) framework, but develops subsequent and a novel regulatory readiness level (RRL) and market readiness level (MRL). This tool uses the ideally-suited system dynamics framework to incorporate feedbacks and time delays. Future energy-economic-environment models, regardless of their programming platform, may adapt this software model component framework or module to further vet the likelihood of new or innovative technology moving through the laboratory, regulatory and market space. The prototype analytical framework and tool, called the Technology, Regulatory and Market Readiness Level simulation model (TRMsim) illustrates the interaction between technology research, application, policy and market dynamics as they relate to a new or innovative technology moving from the theoretical stage to full market deployment. The initial results that illustrate the models capabilities indicate for a hypothetical technology, that increasing the key driver behind each of the TRL, RRL and MRL components individually decreases the time required for the technology to progress through each component by 63, 68 and 64%, respectively. Therefore, under the current working assumptions, to decrease the time it may take for a technology to move from the conceptual stage to full scale market adoption one might consider expending additional effort to secure regulatory approval and reducing the uncertainty of the technologys demand in the marketplace.« less

UN TRISO Compaction in SiC for FCM Fuel Irradiations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terrani, Kurt A.; Trammell, Michael P.; Kiggans, James O.

2016-11-01

The U.S. Department of Energy Office of Nuclear Energy (DOE-NE) Advanced Fuels Campaign (AFC) is conducting research and development to elevate the technology readiness level of Fully Ceramic Microencapsulated (FCM) fuels, a candidate nuclear fuel with potentially enhanced accident tolerance due to very high fission product retention. One of the early activities in FY17 was to demonstrate production of FCM pellets with uranium nitride TRISO particles. This was carried out in preparation of the larger pellet production campaign in support of the upcoming irradiation testing of this fuel form at INL’s Advanced Test Reactor.

Edgewood Biosensors Test Bed Hand-held and Man-Portable Edition

DTIC Science & Technology

2013-09-01

Laboratories Antibody-based wave guide detection Antibody-based capture beads Seattle Sensor Systems 𔃺Ŕ’"𔃺’ Surface plasmon resonance 19  Approved...160  APPENDIX A: TECHNOLOGY READINESS ASSIGNMENTS .......................................................... A‐1  APPENDIX B: BIO ...Sandia National Laboratories’ SpinDx™, Seattle  Sensors  Systems’ SPIRIT™ and  the Research International RAPTOR scored poorly and assessed to be

Smart homes and home health monitoring technologies for older adults: A systematic review.

PubMed

Liu, Lili; Stroulia, Eleni; Nikolaidis, Ioanis; Miguel-Cruz, Antonio; Rios Rincon, Adriana

2016-07-01

Around the world, populations are aging and there is a growing concern about ways that older adults can maintain their health and well-being while living in their homes. The aim of this paper was to conduct a systematic literature review to determine: (1) the levels of technology readiness among older adults and, (2) evidence for smart homes and home-based health-monitoring technologies that support aging in place for older adults who have complex needs. We identified and analyzed 48 of 1863 relevant papers. Our analyses found that: (1) technology-readiness level for smart homes and home health monitoring technologies is low; (2) the highest level of evidence is 1b (i.e., one randomized controlled trial with a PEDro score ≥6); smart homes and home health monitoring technologies are used to monitor activities of daily living, cognitive decline and mental health, and heart conditions in older adults with complex needs; (3) there is no evidence that smart homes and home health monitoring technologies help address disability prediction and health-related quality of life, or fall prevention; and (4) there is conflicting evidence that smart homes and home health monitoring technologies help address chronic obstructive pulmonary disease. The level of technology readiness for smart homes and home health monitoring technologies is still low. The highest level of evidence found was in a study that supported home health technologies for use in monitoring activities of daily living, cognitive decline, mental health, and heart conditions in older adults with complex needs. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Status of NASA In-Space Propulsion Technologies and Their Infusion Potential

NASA Technical Reports Server (NTRS)

Anderson, David; Pencil, Eric; Vento, Dan; Peterson, Todd; Dankanich, John; Hahne, David; Munk, Michelle

2011-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing in-space propulsion technologies that will enable or enhance NASA robotic science missions. These in-space propulsion technologies have broad applicability to future competed Discovery and New Frontiers mission solicitations, and are potentially enabling for future NASA flagship and sample return missions currently being considered. This paper provides status of the technology development of several in-space propulsion technologies that are ready for infusion into future missions. The technologies that are ready for flight infusion are: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies that will be ready for flight infusion in FY12/13 are 1) Advanced Xenon Flow Control System, and 2) ultra-lightweight propellant tank technology advancements and their infusion potential will be also discussed. The paper will also describe the ISPT project s future focus on propulsion for sample return missions: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) needed for sample return missions from many different destinations; and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle-focused, and present a different set of technology infusion challenges. Systems/Mission Analysis focused on developing tools and assessing the application of propulsion technologies to a wide variety of mission concepts.

Clinicians' perceptions of organizational readiness for change in the context of clinical information system projects: insights from two cross-sectional surveys.

PubMed

Paré, Guy; Sicotte, Claude; Poba-Nzaou, Placide; Balouzakis, George

2011-02-28

The adoption and diffusion of clinical information systems has become one of the critical benchmarks for achieving several healthcare organizational reform priorities, including home care, primary care, and integrated care networks. However, these systems are often strongly resisted by the same community that is expected to benefit from their use. Prior research has found that early perceptions and beliefs play a central role in shaping future attitudes and behaviors such as negative rumors, lack of involvement, and resistance to change. In this line of research, this paper builds on the change management and information systems literature and identifies variables associated with clinicians' early perceptions of organizational readiness for change in the specific context of clinical information system projects. Two cross-sectional surveys were conducted to test our research model. First, a questionnaire was pretested and then distributed to the future users of a mobile computing technology in 11 home care organizations. The second study took place in a large teaching hospital that had approved a budget for the acquisition of an electronic medical records system. Data analysis was performed using partial least squares. Scale items used in this study showed adequate psychometric properties. In Study 1, four of the hypothesized links in the research model were supported, with change appropriateness, organizational flexibility, vision clarity, and change efficacy explaining 75% of the variance in organizational readiness. In Study 2, four hypotheses were also supported, two of which differed from those supported in Study 1: the presence of an effective project champion and collective self-efficacy. In addition to these variables, vision clarity and change appropriateness also helped explain 75% of the variance in the dependent variable. Explanations for the similarities and differences observed in the two surveys are provided. Organizational readiness is arguably a key factor involved in clinicians' initial support for clinical information system initiatives. As healthcare organizations continue to invest in information technologies to improve quality and continuity of care and reduce costs, understanding the factors that influence organizational readiness for change represents an important avenue for future research.

Clinicians' perceptions of organizational readiness for change in the context of clinical information system projects: insights from two cross-sectional surveys

PubMed Central

2011-01-01

Background The adoption and diffusion of clinical information systems has become one of the critical benchmarks for achieving several healthcare organizational reform priorities, including home care, primary care, and integrated care networks. However, these systems are often strongly resisted by the same community that is expected to benefit from their use. Prior research has found that early perceptions and beliefs play a central role in shaping future attitudes and behaviors such as negative rumors, lack of involvement, and resistance to change. In this line of research, this paper builds on the change management and information systems literature and identifies variables associated with clinicians' early perceptions of organizational readiness for change in the specific context of clinical information system projects. Methods Two cross-sectional surveys were conducted to test our research model. First, a questionnaire was pretested and then distributed to the future users of a mobile computing technology in 11 home care organizations. The second study took place in a large teaching hospital that had approved a budget for the acquisition of an electronic medical records system. Data analysis was performed using partial least squares. Results Scale items used in this study showed adequate psychometric properties. In Study 1, four of the hypothesized links in the research model were supported, with change appropriateness, organizational flexibility, vision clarity, and change efficacy explaining 75% of the variance in organizational readiness. In Study 2, four hypotheses were also supported, two of which differed from those supported in Study 1: the presence of an effective project champion and collective self-efficacy. In addition to these variables, vision clarity and change appropriateness also helped explain 75% of the variance in the dependent variable. Explanations for the similarities and differences observed in the two surveys are provided. Conclusions Organizational readiness is arguably a key factor involved in clinicians' initial support for clinical information system initiatives. As healthcare organizations continue to invest in information technologies to improve quality and continuity of care and reduce costs, understanding the factors that influence organizational readiness for change represents an important avenue for future research. PMID:21356080

The Readiness to Change for Bariatric Surgery Assessment Tool: Validity, Factor Structure, and Reliability.

PubMed

Carlson, Susan M S

2017-11-01

Currently, there is no guideline or standard of practice for performing the psychiatric/psychological evaluation that is a requirement for approval for bariatric surgery. The Readiness to Change for Bariatric Surgery Assessment Tool (RCB-SAT) establishes a means for psychiatric evaluators to objectively assess the patient's cognition, beliefs, and motivation around the bariatric diet and lifestyle changes. Development of a clinical decision-making tool for assessing readiness to change in bariatric patients will be useful regarding The Strategic Plan for NIH Obesity Research. The strategic plan outlines 6 overarching themes, with the last 3 centering around creation of such a clinical decision-making tool to assess a bariatric patient's readiness to change: evaluate promising strategies for obesity prevention and treatment in realworld settings and diverse populations, harness technology and tools to advance obesity research and improve health care delivery, and facilitate integration of research results into community programs and medical practice (National Institutes of Health, 2011). The pilot tool was administered to 153 potential bariatric patients, with 61 patients completing the survey a second time. Face and content validity of the items were established through an expert review process. Principle axis factoring by means of varimax rotation with Kaiser normalization identified 15 items loading on 3 factors associated with Prochaska and DiClemente's transtheoretical model of health behavior change: precontemplation, contemplation, and action (DiClemente & Prochaska, 1998). Test-retest reliability was also established for the tool. The proposed RCB-SAT demonstrates potential for assessing a patient's readiness to change regarding the bariatric diet and lifestyle.

Effects of team-based learning on perceived teamwork and academic performance in a health assessment subject.

PubMed

Park, Hyung-Ran; Kim, Chun-Ja; Park, Jee-Won; Park, Eunyoung

2015-01-01

The purpose of this study was to examine the effectiveness of team-based learning (a well-recognized learning and teaching strategy), applied in a health assessment subject, on nursing students' perceived teamwork (team-efficacy and team skills) and academic performance (individual and team readiness assurance tests, and examination scores). A prospective, one-group, pre- and post-test design enrolled a convenience sample of 74 second-year nursing students at a university in Suwon, Korea. Team-based learning was applied in a 2-credit health assessment subject over a 16-week semester. All students received written material one week before each class for readiness preparation. After administering individual- and team-readiness assurance tests consecutively, the subject instructor gave immediate feedback and delivered a mini-lecture to the students. Finally, students carried out skill based application exercises. The findings showed significant improvements in the mean scores of students' perceived teamwork after the introduction of team-based learning. In addition, team-efficacy was associated with team-adaptability skills and team-interpersonal skills. Regarding academic performance, team readiness assurance tests were significantly higher than individual readiness assurance tests over time. Individual readiness assurance tests were significantly related with examination scores, while team readiness assurance tests were correlated with team-efficacy and team-interpersonal skills. The application of team-based learning in a health assessment subject can enhance students' perceived teamwork and academic performance. This finding suggests that team-based learning may be an effective learning and teaching strategy for improving team-work of nursing students, who need to collaborate and effectively communicate with health care providers to improve patients' health.

A Synopsis of Ion Propulsion Development Projects in the United States: SERT 1 to Deep Space I

NASA Technical Reports Server (NTRS)

Sovey, James S.; Rawlin, Vincent K.; Patterson, Michael J.

1999-01-01

The historical background and characteristics of the experimental flights of ion propulsion systems and the major ground-based technology demonstrations were reviewed. The results of the first successful ion engine flight in 1964, SERT I which demonstrated ion beam neutralization, are discussed along with the extended operation of SERT II starting in 1970. These results together with the technology employed on the early cesium engine flights. the Applications Technology Satellite (ATS) series, and the ground-test demonstrations, have provided the evolutionary path for the development of xenon ion thruster component technologies, control systems, and power circuit implementations. In the 1997-1999 period, the communication satellite flights using ion engine systems and the Deep Space I flight confirmed that these auxiliary and primary propulsion systems have advanced to a high-level of flight-readiness.

The Condition of College & Career Readiness 2016: Oregon Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Oregon: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: Minnesota Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Minnesota: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: Virginia Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Virginia: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

Neuroscience Perspectives on Disparities in School Readiness and Cognitive Achievement

ERIC Educational Resources Information Center

Noble, Kimberly G.; Tottenham, Nim; Casey, B. J.

2005-01-01

This article allows readers to look at racial and ethnic disparities in school readiness from a neuroscience perspective. Although researchers have traditionally measured gaps in school readiness using broad achievement tests, they can now assess readiness in terms of more specific brain-based cognitive functions. Three neurocognitive…

The Condition of College & Career Readiness 2016: Pennsylvania Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Pennsylvania: performance, STEM, career readiness, impact, behaviors that impact access and opportunity,…

The Reality of College Readiness, 2012. North Carolina

ERIC Educational Resources Information Center

ACT, Inc., 2012

2012-01-01

Annually, ACT provides each state with "The Condition of College & Career Readiness," a report that details the college readiness of students who took the ACT[R] test. This report is a companion to "The Condition of College & Career Readiness." This paper traces the college enrollment, retention, re-enrollment, and…

The Reality of College Readiness, 2012. South Carolina

ERIC Educational Resources Information Center

ACT, Inc., 2012

2012-01-01

Annually, ACT provides each state with "The Condition of College & Career Readiness," a report that details the college readiness of students who took the ACT[R] test. This report is a companion to "The Condition of College & Career Readiness." This paper traces the college enrollment, retention, re-enrollment, and…

The Condition of College & Career Readiness 2016: Michigan Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Michigan: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: Idaho Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Idaho: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline, and…

The Reality of College Readiness, 2012. New Hampshire

ERIC Educational Resources Information Center

ACT, Inc., 2012

2012-01-01

Annually, ACT provides each state with "The Condition of College & Career Readiness," a report that details the college readiness of students who took the ACT[R] test. This report is a companion to "The Condition of College & Career Readiness." This paper traces the college enrollment, retention, re-enrollment, and…

The Condition of College & Career Readiness 2016: Hawaii Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Hawaii: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: Wisconsin Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for Wisconsin: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

Effect of test concentration in the ready biodegradability test for chemical substances: Improvement of OECD test guideline 301C.

PubMed

Nabeoka, Ryosuke; Taruki, Masanori; Kayashima, Takakazu; Yoshida, Tomohiko; Kameya, Takashi

2016-01-01

In Japan, understanding the environmental persistence of chemicals is very important for risk assessment, and ready biodegradability tests are mainly conducted according to the Organisation for Economic Co-operation and Development test guideline 301C. However, the highest test concentration specified in test guideline 301C, 100 mg/L, may cause microbial toxicity and incomplete biodegradation. The authors performed test guideline 301C tests at test concentrations of 30 mg/L for 13 substances that were readily biodegradable in ready biodegradability tests but not in test guideline 301C tests. Of the 5 substances with potential to cause microbial toxicity at 100 mg/L, the percentage of biodegradation of sodium dimethyldithiocarbamate, 4-chloro-3-cresol (CC), thymol (THY), and p-tert-butyl-α-methylbenzenepropionaldehyde measured by biochemical oxygen demand (BOD) increased in the test guideline 301C test at 30 mg/L, suggesting a reduction in toxicity effects. Furthermore, CC and THY met the criteria for ready biodegradability, which are more than 60% of biodegradation by BOD and a 10-d window. Of the 8 substances with a low potential for causing microbial toxicity at 100 mg/L, the percentage of biodegradation of only 2-(diethylamino)ethanol increased in the test guideline 301C test at 30 mg/L. Employing a lower test concentration in the standard test guideline 301C test will contribute to improvement of consistency between results of a test guideline 301C test and other ready biodegradability tests. © 2015 SETAC.

Identifying Proactive Collaboration Strategies for Teacher Readiness for Marginalized Students

ERIC Educational Resources Information Center

Akin, Imani; Neumann, Crystal

2013-01-01

This research discusses the value of collaborating to develop strategies that enhance teacher readiness for the marginalized student and the use of qualitative data that can lead to student academic and social success. Education domains include the learning environment, technology, and building parent and community connections. This research…

Consumers and Makers: Exploring Opposing Paradigms of Millennial College Readiness

ERIC Educational Resources Information Center

Jackson, Matthew

2017-01-01

The political and technological circumstances of the past two decades have culminated in opposing epistemic paradigms of college readiness, where millennial students' conceptual understanding of "learning" is both narrowed to meet the demands of school systems bound to accountability and amplified by a rapidly evolving digital world. The…

Testing a Regenerative Carbon Dioxide and Moisture Removal Technology

NASA Technical Reports Server (NTRS)

Barta, Daniel J.; Button, Amy; Sweterlitsch, Jeffrey J.; Curley, Suzanne

2010-01-01

The National Aeronautics and Space Administration supported the development of a new vacuum-desorbed regenerative carbon dioxide and humidity control technology for use in short duration human spacecraft. The technology was baselined for use in the Orion Crew Exploration Vehicle s Environmental Control and Life Support System (ECLSS). Termed the Carbon Dioxide And Moisture Removal Amine Swing-bed (CAMRAS), the unit was developed by Hamilton Sundstrand and has undergone extensive testing at Johnson Space Center. The tests were performed to evaluate performance characteristics under range of operating conditions and human loads expected in future spacecraft applications, as part of maturation to increase its readiness for flight. Early tests, conducted at nominal atmospheric pressure, used human metabolic simulators to generate loads, with later tests making us of human test subjects. During these tests many different test cases were performed, involving from 1 to 6 test subjects, with different activity profiles (sleep, nominal and exercise). These tests were conducted within the airlock portion of a human rated test chamber sized to simulate the Orion cabin free air volume. More recently, a test was completed that integrated the CAMRAS with a simulated suit loop using prototype umbilicals and was conducted at reduced atmospheric pressure and elevated oxygen levels. This paper will describe the facilities and procedures used to conduct these and future tests, and provide a summary of findings.

Project IMPACT Pilot Report: Feasibility of Implementing a Hospital-to-Home Transition Bundle.

PubMed

Mallory, Leah A; Osorio, Snezana Nena; Prato, B Stephen; DiPace, Jennifer; Schmutter, Lisa; Soung, Paula; Rogers, Amanda; Woodall, William J; Burley, Kayla; Gage, Sandra; Cooperberg, David

2017-03-01

To improve hospital to home transitions, a 4-element pediatric patient-centered transition bundle was developed, including: a transition readiness checklist; predischarge teach-back education; timely and complete written handoff to the primary care provider; and a postdischarge phone call. The objective of this study was to demonstrate the feasibility of bundle implementation and report initial outcomes at 4 pilot sites. Outcome measures included postdischarge caregiver ability to teach-back key home management information and 30-day reuse rates. A multisite, observational time series using multiple planned sequential interventions to implement bundle components with non-technology-supported and technology-supported patients. Data were collected via electronic health record reviews and during postdischarge phone calls. Statistical process control charts were used to assess outcomes. Four pilot sites implemented the bundle between January 2014 and May 2015 for 2601 patients, of whom 1394 had postdischarge telephone encounters. Improvement was noted in the implementation of all bundle elements with the transitions readiness checklist posing the greatest feasibility challenge. Phone contact connection rates were 69%. Caregiver ability to teach-back essential home management information postdischarge improved from 18% to 82%. No improvement was noted in reuse rates, which differed dramatically between technology-supported and non-technology-supported patients. A pediatric care transition bundle was successfully tested and implemented, as demonstrated by improvement in all process measures, as well as caregiver home management skills. Important considerations for successful implementation and evaluation of the discharge bundle include the role of local context, electronic health record integration, and subgroup analysis for technology-supported patients. Copyright © 2017 by the American Academy of Pediatrics.

ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM QUARTERLY REPORT - OCTOBER 2003

EPA Science Inventory

The U.S. EPA Environmental Technology Verification (ETV) Program provides credible performance data for commercial-ready environmental technologies to speed their implementation for the benefit of vendors, purchasers, permitters, and the public. The ETV Quarterly Reports provide...

ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM

EPA Science Inventory

This presentation will be given at the EPA Science Forum 2005 in Washington, DC. The Environmental Technology Verification Program (ETV) was initiated in 1995 to speed implementation of new and innovative commercial-ready environemntal technologies by providing objective, 3rd pa...

Research and Technology Activities Supporting Closed-Brayton-Cycle Power Conversion System Development

NASA Technical Reports Server (NTRS)

Barrett, Michael J.

2004-01-01

The elements of Brayton technology development emphasize power conversion system risk mitigation. Risk mitigation is achieved by demonstrating system integration feasibility, subsystem/component life capability (particularly in the context of material creep) and overall spacecraft mass reduction. Closed-Brayton-cycle (CBC) power conversion technology is viewed as relatively mature. At the 2-kWe power level, a CBC conversion system Technology Readiness Level (TRL) of six (6) was achieved during the Solar Dynamic Ground Test Demonstration (SD-GTD) in 1998. A TRL 5 was demonstrated for 10 kWe-class CBC components during the development of the Brayton Rotating Unit (BRU) from 1968 to 1976. Components currently in terrestrial (open cycle) Brayton machines represent TRL 4 for similar uses in 100 kWe-class CBC space systems. Because of the baseline component and subsystem technology maturity, much of the Brayton technology task is focused on issues related to systems integration. A brief description of ongoing technology activities is given.

The Condition of College & Career Readiness 2016: New York Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for New York: performance, STEM, career readiness, impact, behaviors that impact access and opportunity, pipeline,…

The Condition of College & Career Readiness 2016: West Virginia Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for West Virginia: performance, STEM, career readiness, impact, behaviors that impact access and opportunity,…

The Condition of College & Career Readiness, 2011

ERIC Educational Resources Information Center

ACT, Inc., 2011

2011-01-01

Since 1959, ACT has collected and reported data on students' academic readiness for college. This report provides a college and career readiness snapshot of the ACT-tested high school class of 2011. ACT has long defined college and career readiness as the acquisition of the knowledge and skills a student needs to enroll and succeed in…

The Condition of College & Career Readiness 2016: New Hampshire Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for New Hampshire: performance, STEM, career readiness, behaviors that impact access and opportunity, pipeline, and…

The Condition of College & Career Readiness 2016: New Mexico Key Findings

ERIC Educational Resources Information Center

ACT, Inc., 2016

2016-01-01

"The Condition of College and Career Readiness" looks at the progress of the 2016 ACT®-tested graduating class relative to college and career readiness. This state briefing begins with statistics in the following categories for New Mexico: performance, STEM, career readiness, impact, behaviors that impact access and opportunity,…

Liquid biopsy genotyping in lung cancer: ready for clinical utility?

PubMed Central

Ho, Chung-Liang; Wei, Fang; Wong, David T.; Su, Wu-Chou; Lin, Chien-Chung

2017-01-01

Liquid biopsy is a blood test that detects evidence of cancer cells or tumor DNA in the circulation. Despite complicated collection methods and the requirement for technique-dependent platforms, it has generated substantial interest due, in part, to its potential to detect driver oncogenes such as epidermal growth factor receptor (EGFR) mutants in lung cancer. This technology is advancing rapidly and is being incorporated into numerous EGFR tyrosine kinase inhibitor (EGFR-TKI) development programs. It appears ready for integration into clinical care. Recent studies have demonstrated that biological fluids such as saliva and urine can also be used for detecting EGFR mutant DNA through application other user-friendly techniques. This review focuses on the clinical application of liquid biopsies to lung cancer genotyping, including EGFR and other targets of genotype-directed therapy and compares multiple platforms used for liquid biopsy. PMID:28099915

Cloud GIS Based Watershed Management

NASA Astrophysics Data System (ADS)

Bediroğlu, G.; Colak, H. E.

2017-11-01

In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

Flight Testing of the Space Launch System (SLS) Adaptive Augmenting Control (AAC) Algorithm on an F/A-18

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; VanZwieten, Tannen S.; Hanson, Curtis E.; Wall, John H.; Miller, Chris J.; Gilligan, Eric T.; Orr, Jeb S.

2014-01-01

The Marshall Space Flight Center (MSFC) Flight Mechanics and Analysis Division developed an adaptive augmenting control (AAC) algorithm for launch vehicles that improves robustness and performance on an as-needed basis by adapting a classical control algorithm to unexpected environments or variations in vehicle dynamics. This was baselined as part of the Space Launch System (SLS) flight control system. The NASA Engineering and Safety Center (NESC) was asked to partner with the SLS Program and the Space Technology Mission Directorate (STMD) Game Changing Development Program (GCDP) to flight test the AAC algorithm on a manned aircraft that can achieve a high level of dynamic similarity to a launch vehicle and raise the technology readiness of the algorithm early in the program. This document reports the outcome of the NESC assessment.

Advanced Guidance and Control for Hypersonics and Space Access

NASA Technical Reports Server (NTRS)

Hanson, John M.; Hall, Charles E.; Mulqueen, John A.; Jones, Robert E.

2003-01-01

Advanced guidance and control (AG&C) technologies are critical for meeting safety, reliability, and cost requirements for the next generation of reusable launch vehicle (RLV), whether it is fully rocket-powered or has air- breathing components. This becomes clear upon examining the number of expendable launch vehicle failures in the recent past where AG&C technologies could have saved a RLV with the same failure mode, the additional vehicle problems where t h i s technology applies, and the costs and time associated with mission design with or without all these failure issues. The state-of-the-art in guidance and control technology, as well as in computing technology, is the point where we can look to the possibility of being able to safely return a RLV in any situation where it can physically be recovered. This paper outlines reasons for AWC, current technology efforts, and the additional work needed for making this goal a reality. There are a number of approaches to AG&C that have the potential for achieving the desired goals. For some of these methods, we compare the results of tests designed to demonstrate the achievement of the goals. Tests up to now have been focused on rocket-powered vehicles; application to hypersonic air-breathers is planned. We list the test cases used to demonstrate that the desired results are achieved, briefly describe an automated test scoring method, and display results of the tests. Some of the technology components have reached the maturity level where they are ready for application to a new vehicle concept, while others are not far along in development.

Towards testing quantum physics in deep space

NASA Astrophysics Data System (ADS)

Kaltenbaek, Rainer

2016-07-01

MAQRO is a proposal for a medium-sized space mission to use the unique environment of deep space in combination with novel developments in space technology and quantum technology to test the foundations of physics. The goal is to perform matter-wave interferometry with dielectric particles of up to 10^{11} atomic mass units and testing for deviations from the predictions of quantum theory. Novel techniques from quantum optomechanics with optically trapped particles are to be used for preparing the test particles for these experiments. The core elements of the instrument are placed outside the spacecraft and insulated from the hot spacecraft via multiple thermal shields allowing to achieve cryogenic temperatures via passive cooling and ultra-high vacuum levels by venting to deep space. In combination with low force-noise microthrusters and inertial sensors, this allows realizing an environment well suited for long coherence times of macroscopic quantum superpositions and long integration times. Since the original proposal in 2010, significant progress has been made in terms of technology development and in refining the instrument design. Based on these new developments, we submitted/will submit updated versions of the MAQRO proposal in 2015 and 2016 in response to Cosmic-Vision calls of ESA for a medium-sized mission. A central goal has been to address and overcome potentially critical issues regarding the readiness of core technologies and to provide realistic concepts for further technology development. We present the progress on the road towards realizing this ground-breaking mission harnessing deep space in novel ways for testing the foundations of physics, a technology pathfinder for macroscopic quantum technology and quantum optomechanics in space.

Mechanical Testing of Polymeric Composites for Aircraft Applications: Standards, Requirements and Limitations

NASA Astrophysics Data System (ADS)

Chinchan, Levon; Shevtsov, Sergey; Soloviev, Arcady; Shevtsova, Varvara; Huang, Jiun-Ping

The high-loaded parts of modern aircrafts and helicopters are often produced from polymeric composite materials. Such materials consist of reinforcing fibers, packed by layers with the different angles, and resin, which uniformly distributes the structural stresses between fibers. These composites should have an orthotropic symmetry of mechanical properties to obtain the desirable spatial distribution of elastic moduli consistent to the external loading pattern. Main requirements to the aircraft composite materials are the specified elastic properties (9 for orthotropic composite), long-term strength parameters, high resistance against the environmental influences, low thermal expansion to maintain the shape stability. These properties are ensured by an exact implementation of technological conditions and many testing procedures performed with the fibers, resin, prepregs and ready components. Most important mechanical testing procedures are defined by ASTM, SACMA and other standards. However in each case the wide diversity of components (dimensions and lay-up of fibers, rheological properties of thermosetting resins) requires a specific approach to the sample preparation, testing, and numerical processing of the testing results to obtain the veritable values of tested parameters. We pay the special attention to the cases where the tested specimens are cut not from the plates recommended by standards, but from the ready part manufactured with the specific lay-up, tension forces on the reinforcing fiber at the filament winding, and curing schedule. These tests can provide most useful information both for the composite structural design and to estimate a quality of the ready parts. We consider an influence of relation between specimen dimensions and pattern of the fibers winding (or lay-up) on the results of mechanical testing for determination of longitudinal, transverse and in-plane shear moduli, an original numerical scheme for reconstruction of in-plane shear modulus measured by the modified Iosipescu method which use finite element based numerical processing and indicative data preliminary obtained by the short-beam test. The sensitivity and ability to decoupling the values of in-plane and interlaminar shear moduli obtained by the sample twisting test is studied and discussed.

The Predictive Validity of the Metropolitan Readiness Tests, 1976 Edition.

ERIC Educational Resources Information Center

Nagle, Richard J.

1979-01-01

A sample of 176 first-grade children was tested on the Metropolitan Readiness Tests, 1976 Edition (MRT), during the initial month of school and was retested eight months later on the Stanford Achievement Test. Results demonstrated substantial validity of the MRT for predicting first-grade achievement. (Author/CTM)

NASA In-Space Propulsion Technologies and Their Infusion Potential

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil,Eric J.; Peterson, Todd; Vento, Daniel; Munk, Michelle M.; Glaab, Louis J.; Dankanich, John W.

2012-01-01

The In-Space Propulsion Technology (ISPT) program has been developing in-space propulsion technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (Electric and Chemical), Entry Vehicle Technologies (Aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies that will be ready for flight infusion in the near future will be Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future focuses for ISPT are sample return missions and other spacecraft bus technologies like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions; and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle-focused, and present a different set of technology infusion challenges. While the Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

Design and fabrication of highly sensitive and stable biochip for glucose biosensing

NASA Astrophysics Data System (ADS)

Lu, Shi-Yu; Lu, Yao; Jin, Meng; Bao, Shu-Juan; Li, Wan-Yun; Yu, Ling

2017-11-01

Common producing steps for test strips is complex and fussy. In this work, we proposed a feasible binder-free test strips fabrication method to directly grow enzyme/manganese phosphate nanosheets hybrids on the screen-print electrodes (SPE). Combined with microfluidic packaging technology, the ready-made portable electrochemical biochip shows a wider linear range (1-40 mM, R2 = 0.9998) and excellent stability (maintained 98% response current after 20 days store and retained 75% response current after continuous 30 days determination) for the detection of glucose. Compared with commercial test strips, the biochip exhibits excellent sensitivity, stability and accuracy, which is indicative of its potential application in real samples.

An Assessment of the Technical Readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR) Technology

NASA Technical Reports Server (NTRS)

Flynn, Michael

2000-01-01

This poster provides an assessment of the technical readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR). The VPCAR technology is a fully regenerative water recycling technology designed specifically for applications such as a near term Mars exploration mission. The VPCAR technology is a highly integrated distillation/catalytic oxidation based water processor. It is designed to accept a combined wastewater stream (urine, condensate, and hygiene) and produces potable water in a single process step which requires -no regularly scheduled re-supply or maintenance for a 3 year mission. The technology is designed to be modular and to fit into a volume comparable to a single International Space Station Rack (when sized for a crew of 6). This poster provides a description of the VPCAR technology and a summary of the current performance of the technology. Also provided are the results of two separate NASA sponsored system trade studies which investigated the potential payback of further development of the VPCAR technology.

The readiness of addiction treatment agencies for health care reform

PubMed Central

2012-01-01

The Patient Protection and Affordable Care Act (PPACA) aims to provide affordable health insurance and expanded health care coverage for some 32 million Americans. The PPACA makes provisions for using technology, evidence-based treatments, and integrated, patient-centered care to modernize the delivery of health care services. These changes are designed to ensure effectiveness, efficiency, and cost-savings within the health care system. To gauge the addiction treatment field’s readiness for health reform, the authors developed a Health Reform Readiness Index (HRRI) survey for addiction treatment agencies. Addiction treatment administrators and providers from around the United States completed the survey located on the http://www.niatx.net website. Respondents self-assessed their agencies based on 13 conditions pertinent to health reform readiness, and received a confidential score and instant feedback. On a scale of “Needs to Begin,” “Early Stages,” “On the Way,” and “Advanced,” the mean scores for respondents (n = 276) ranked in the Early Stages of health reform preparation for 11 of 13 conditions. Of greater concern was that organizations with budgets of < $5 million (n = 193) were less likely than those with budgets > $5 million to have information technology (patient records, patient health technology, and administrative information technology), evidence-based treatments, quality management systems, a continuum of care, or a board of directors informed about PPACA. The findings of the HRRI indicate that the addiction field, and in particular smaller organizations, have much to do to prepare for a future environment that has greater expectations for information technology use, a credentialed workforce, accountability for patient care, and an integrated continuum of care. PMID:22551101

Test Plans. Lightweight Durable TPS: Tasks 1,2,4,5, and 6

NASA Technical Reports Server (NTRS)

Greenberg, H. S.; Tu, Tina

1994-01-01

The objective of this task is to develop the fluted core flexible blankets, also referred to as the Tailorable Advanced Blanket Insulation (TABI), to a technology readiness level (TRL) of 6. This task is one of the six tasks under TA 3, Lightweight Durable TPS study, of the Single Stage to Orbit (SSTO) program. The purpose of this task is to develop a durable and low maintenance flexible TPS blanket material to be implemented on the SSTO vehicle.

Technology Projections for Solar Dynamic Power

NASA Technical Reports Server (NTRS)

Mason, Lee S.

1999-01-01

Solar Dynamic power systems can offer many potential benefits to Earth orbiting satellites including high solar-to-electric efficiency, long life without performance degradation, and high power capability. A recent integrated system test of a 2 kilowatt SD power system in a simulated space environment has successfully demonstrated technology readiness for space flight. Conceptual design studies of SD power systems have addressed several potential mission applications: a 10 kilowatt LEO satellite, a low power Space Based Radar, and a 30 kilowatt GEO communications satellite. The studies show that with moderate component development, SD systems can exhibit excellent mass and deployed area characteristics. Using the conceptual design studies as a basis, a SD technology roadmap was generated which identifies the component advances necessary to assure SD systems a competitive advantage for future NASA, DOD, and commercial missions.

Polyphenol oxidase activity from three sicilian artichoke [ Cynara cardunculus L. Var. scolymus L. (Fiori)] cultivars: studies and technological application on minimally processed production.

PubMed

Todaro, Aldo; Peluso, Orazio; Catalano, Anna Eghle; Mauromicale, Giovanni; Spagna, Giovanni

2010-02-10

Several papers helped with the development of more methods to control browning, or study thermal polyphenol oxidase (PPO) inactivation, but did not provide any solutions to technological process problems and food process improvement. Artichokes [ Cynara cardunculus L. var. scolymus L. (Fiori)] are susceptible to browning; this alteration could affect and reduce the suitability for its use, fresh or processed. Within this study, the catecholase and cresolase activities of PPO from three different Sicilian artichokes cultivar were characterized with regard to substrate specificity and enzyme kinetics, optimum pH and temperature, temperature and pH stability, and inhibitor test; all of the results were used for technological purposes, particularly to optimize minimally processed productions (ready-to-eat and cook-chilled artichokes).

NASA Technology Readiness Level Definitions

NASA Technical Reports Server (NTRS)

Mcnamara, Karen M.

2012-01-01

This presentation will cover the basic Technology Readiness Level (TRL) definitions used by the National Aeronautics and Space Administration (NASA) and their specific wording. We will discuss how they are used in the NASA Project Life Cycle and their effectiveness in practice. We'll also discuss the recent efforts by the International Standards Organization (ISO) to develop a broadly acceptable set of TRL definitions for the international space community and some of the issues brought to light. This information will provide input for further discussion of the use of the TRL scale in manufacturing.

2000-hour cyclic endurance test of a laboratory model multipropellant resistojet

NASA Technical Reports Server (NTRS)

Morren, W. Earl; Sovey, James S.

1987-01-01

The technological readiness of a long-life multipropellant resistojet for space station auxiliary propulsion is demonstrated. A laboratory model resistojet made from grain-stabilized platinum served as a test bed to evaluate the design characteristics, fabrication methods, and operating strategies for an engineering model multipropellant resistojet developed under contract by the Rocketdyne Division of Rockwell International and Technion Incorporated. The laboratory model thruster was subjected to a 2000-hr, 2400-thermal-cycle endurance test using carbon dioxide propellant. Maximum thruster temperatures were approximately 1400 C. The post-test analyses of the laboratory model thruster included an investigation of component microstructures. Significant observations from the laboratory model thruster are discussed as they relate to the design of the engineering model thruster.

Orion Hatch Window Testing

NASA Image and Video Library

2018-04-09

Inside a laboratory in the Neil Armstrong Operations and Checkout Building at NASA's Kennedy Space Center in Florida, Mark Nurge, Ph.D., at left, a physicist in the Applied Physics Lab with the center's Exploration Research and Technology Programs, and Bence Bartha, Ph.D., a specialist in non-destructive testing with URS Federal Services, are performing the first optical quality testing on a full window stack that is ready for installation in the docking hatch of NASA's Orion spacecraft. The data from the tests will help improve the requirements for manufacturing tolerances on Orion's windows and verify how the window should perform in space. Orion is being prepared for its first integrated uncrewed flight atop NASA's Space Launch System rocket on Exploration Mission-1.

A 2000-hour cyclic endurance test of a laboratory model multipropellant resistojet

NASA Technical Reports Server (NTRS)

Morren, W. Earl; Sovey, James S.

1987-01-01

The technological readiness of a long-life multipropellant resistojet for space station auxiliary propulsion is demonstrated. A laboratory model resistojet made from grain-stabilized platinum served as a test bed to evaluate the design characteristics, fabrication methods, and operating strategies for an engineering model multipropellant resistojet developed under contract by the Rocketdyne Division of Rockwell International and Technion Incorporated. The laboratory model thruster was subjected to a 2000-hr, 2400-thermal-cycle endurance test using carbon dioxide propellant. Maximum thruster temperatures were approximately 1400 C. The post-test analyses of the laboratory model thruster included an investigation of component microstructures. Significant observations from the laboratory model thruster are discussed as they relate to the design of the engineering model thruster.

Community readiness for adopting mHealth in rural Bangladesh: A qualitative exploration.

PubMed

Khatun, Fatema; Heywood, Anita E; Ray, Pradeep K; Bhuiya, Abbas; Liaw, Siaw-Teng

2016-09-01

There are increasing numbers of mHealth initiatives in middle and low income countries aimed at improving health outcomes. Bangladesh is no exception with more than 20 mobile health (mHealth) initiatives in place. A recent study in Bangladesh examined community readiness for mHealth using a framework based on quantitative data. Given the importance of a framework and the complementary role of qualitative exploration, this paper presents data from a qualitative study which complements findings from the quantitative study. The study was conducted in the Chakaria sub-district of Bangladesh. In total, 37 in-depth interviews were conducted between December 2012 and March 2013. Participants included the general public, students, community leaders, school teachers, and formal and informal healthcare providers. Thematic analysis was used to develop a logical and relevant framework to examine community readiness. As in the quantitative exploration, this study approached the investigation with four types of readiness in mind: core readiness, technological readiness, human resource readiness and motivational readiness. Community members, community leaders and healthcare providers expressed their interest in the use of mHealth in rural Bangladesh. Awareness of mHealth and its advantages was low among uneducated people. Participants who have used mHealth were attracted to the speed of access to qualified healthcare providers, time savings and low cost. Some participants did not see the value of using mobile phones for healthcare compared to a face-to-face consultation. Illiteracy, lack of English language proficiency, lack of trust and technological incapability were identified as barriers to mHealth use. However, a sense of ownership, evidence of utility, a positive attitude to the use of mHealth, and intentions towards future use of mHealth were driving forces in the adoption of mHealth services. This study re-affirmed the mHealth readiness conceptual framework with different dimensions of readiness and identified potential barriers and possible solutions for mHealth. Moving forward, emphasis should be placed on training users, providing low-cost services and improving trust of users. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

ETV - ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) - RISK MANAGEMENT

EPA Science Inventory

In October 1995, the Environmental Technology Verification (ETV) Program was established by EPA. The goal of ETV is to provide credible performance data for commercial-ready environmental technologies to speed their implementation for the benefit of vendors, purchasers, permitter...

Virtual Collaboration Readiness Measurement a Case Study in the Automobile Industry

NASA Astrophysics Data System (ADS)

Ziarati, Koorush; Khayami, Raouf; Parvinnia, Elham; Afroozi Milani, Ghazal

In end of the last century information and communication technology caused a veritable evolution in the world of business and commerce. Globalization has changed all the commerce equations and business plans. Old companies have to change their strategies if they want to survive after this technological revolution. A new form of collaboration between the distributed and networked organizations has emerged as the "Virtual Organization" paradigm. A company can not join a virtual organization before obtaining a virtual maturity. This maturity shows the readiness of the company to begin a virtual collaboration. In this paper, based on the coherent and formal definition of virtual organizations, the criteria for measuring the readiness of companies are proposed. Our criteria are confirmed, modified or combined by using the factor analysis method on a sufficient number of virtual companies in the automobile manufacturing industry.

A Study of E-Readiness Assessment: The Case of Three Universities in Nigeria

ERIC Educational Resources Information Center

Eweni, Samuel O.

2012-01-01

This study investigated the readiness of three higher educational institutions in Nigeria in their attempt to introduce and maintain technology-driven services to students, faculty, and support staff. The prerequisites for participation in the digital, networked economy include the affordable ICT, reliable electric supply, reliable and up-to-date…

E-Readiness of Open and Distance Learning (ODL) Facilitators: Implications for Effective Mediation

ERIC Educational Resources Information Center

Nyoni, Jabulani

2014-01-01

This article is a narrative report of the findings from the analysis of multicultural facilitators' discourses on their e-readiness in the use of information and communication technologies (ICTs) affordances in open and distance learning (ODL) mediation experiences. First, the findings revealed by qualitative deconstructive discourse analysis…

Impact of a 4-H Youth Development Program on At-Risk Urban Teenagers

ERIC Educational Resources Information Center

Cutz, German; Campbell, Benjamin; Filchak, Karen K.; Valiquette, Edith; Welch, Mary Ellen

2015-01-01

Dynamic programs that integrate science literacy and workforce readiness are essential to today's youth. The program reported here combined science literacy (gardening and technology) with workforce readiness to assess the impact of program type, prior program participation, and behavior/punctuality on knowledge gain. Findings show that past…

Assessing E-Readiness of the Copperbelt University, Zambia: Case Study

ERIC Educational Resources Information Center

Chipembele, Matuka; Bwalya, Kelvin Joseph

2016-01-01

Purpose: The purpose of this paper is to assess e-readiness (preparedness) of the Copperbelt University (CBU) with a view to ascertain the likelihood of the university benefiting from various opportunities unlocked by the adoption and use of ICT [information and communications technology] in advancing its core mandate of teaching, learning and…

HIPAA Readiness Collaborative in Hawaii.

PubMed

Chun, Marva; Forbes, Susan; Gose, Steven; Kumabe, Brenda; Loo, Jeffrey; Nichols, Lorraine; Rosa, Luis; Sherrill, Laura; Turner, Jim

2002-01-01

The vision of Hawaii's HIPAA Readiness Collaborative (HRC) effort is to realize the positive potential of HIPAA through a collaborative process that engages the entire healthcare delivery system. Goals include reducing the cost of healthcare through streamlining, reducing the cost of HIPAA implementation for HRC participants, and improving the interoperability between facilities through use of standard technologies.

Aerocapture Technology Developments from NASA's In-Space Propulsion Technology Program

NASA Technical Reports Server (NTRS)

Munk, Michelle M.; Moon, Steven A.

2007-01-01

This paper will explain the investment strategy, the role of detailed systems analysis, and the hardware and modeling developments that have resulted from the past 5 years of work under NASA's In-Space Propulsion Program (ISPT) Aerocapture investment area. The organizations that have been funded by ISPT over that time period received awards from a 2002 NASA Research Announcement. They are: Lockheed Martin Space Systems, Applied Research Associates, Inc., Ball Aerospace, NASA's Ames Research Center, and NASA's Langley Research Center. Their accomplishments include improved understanding of entry aerothermal environments, particularly at Titan, demonstration of aerocapture guidance algorithm robustness at multiple bodies, manufacture and test of a 2-meter Carbon-Carbon "hot structure," development and test of evolutionary, high-temperature structural systems with efficient ablative materials, and development of aerothermal sensors that will fly on the Mars Science Laboratory in 2009. Due in large part to this sustained ISPT support for Aerocapture, the technology is ready to be validated in flight.

Can genomics deliver climate-change ready crops?

PubMed

Varshney, Rajeev K; Singh, Vikas K; Kumar, Arvind; Powell, Wayne; Sorrells, Mark E

2018-04-20

Development of climate resilient crops with accelerating genetic gains in crops will require integration of different disciplines/technologies, to see the impact in the farmer's field. In this review, we summarize how we are utilizing our germplasm collections to identify superior alleles/haplotypes through NGS based sequencing approaches and how genomics-enabled technologies together with precise phenotyping are being used in crop breeding. Pre-breeding and genomics-assisted breeding approaches are contributing to the more efficient development of climate-resilient crops. It is anticipated that the integration of several disciplines/technologies will result in the delivery of climate change ready crops in less time. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Objectively measuring pain using facial expression: is the technology finally ready?

PubMed

Dawes, Thomas Richard; Eden-Green, Ben; Rosten, Claire; Giles, Julian; Governo, Ricardo; Marcelline, Francesca; Nduka, Charles

2018-03-01

Currently, clinicians observe pain-related behaviors and use patient self-report measures in order to determine pain severity. This paper reviews the evidence when facial expression is used as a measure of pain. We review the literature reporting the relevance of facial expression as a diagnostic measure, which facial movements are indicative of pain, and whether such movements can be reliably used to measure pain. We conclude that although the technology for objective pain measurement is not yet ready for use in clinical settings, the potential benefits to patients in improved pain management, combined with the advances being made in sensor technology and artificial intelligence, provide opportunities for research and innovation.

Testing equivalence of mediating models of income, parenting, and school readiness for white, black, and Hispanic children in a national sample.

PubMed

Raver, C Cybele; Gershoff, Elizabeth T; Aber, J Lawrence

2007-01-01

This paper examines complex models of the associations between family income, material hardship, parenting, and school readiness among White, Black, and Hispanic 6-year-olds, using the Early Childhood Longitudinal Study-Kindergarten Cohort (ECLS-K). It is critical to test the universality of such complex models, particularly given their implications for intervention, prevention, and public policy. Therefore this study asks: Do measures and models of low income and early school readiness indicators fit differently or similarly for White, Black, and Hispanic children? Measurement equivalence of material hardship, parent stress, parenting behaviors, child cognitive skills, and child social competence is first tested. Model equivalence is then tested by examining whether category membership in a race/ethnic group moderates associations between predictors and young children's school readiness.

Testing Equivalence of Mediating Models of Income, Parenting, and School Readiness for White, Black, and Hispanic Children in a National Sample

PubMed Central

Raver, C. Cybele; Gershoff, Elizabeth T.; Aber, J. Lawrence

2010-01-01

This paper examines complex models of the associations between family income, material hardship, parenting, and school readiness among White, Black, and Hispanic 6-year-olds, using the Early Childhood Longitudinal Study – Kindergarten Cohort (ECLS – K). It is critical to test the universality of such complex models, particularly given their implications for intervention, prevention, and public policy. Therefore this study asks: Do measures and models of low income and early school readiness indicators fit differently or similarly for White, Black, and Hispanic children? Measurement equivalence of material hardship, parent stress, parenting behaviors, child cognitive skills, and child social competence is first tested. Model equivalence is then tested by examining whether category membership in a race/ethnic group moderates associations between predictors and young children’s school readiness. PMID:17328695

Automated Rendezvous and Docking Sensor Testing at the Flight Robotics Laboratory

NASA Technical Reports Server (NTRS)

Mitchell, J.; Johnston, A.; Howard, R.; Williamson, M.; Brewster, L.; Strack, D.; Cryan, S.

2007-01-01

The Exploration Systems Architecture defines missions that require rendezvous, proximity operations, and docking (RPOD) of two spacecraft both in Low Earth Orbit (LEO) and in Low Lunar Orbit (LLO). Uncrewed spacecraft must perform automated and/or autonomous rendezvous, proximity operations and docking operations (commonly known as Automated Rendezvous and Docking, AR&D). The crewed versions may also perform AR&D, possibly with a different level of automation and/or autonomy, and must also provide the crew with relative navigation information for manual piloting. The capabilities of the RPOD sensors are critical to the success of the Exploration Program. NASA has the responsibility to determine whether the Crew Exploration Vehicle (CEV) contractor-proposed relative navigation sensor suite will meet the CEV requirements. The relatively low technology readiness of relative navigation sensors for AR&D has been carried as one of the CEV Projects top risks. The AR&D Sensor Technology Project seeks to reduce this risk by increasing technology maturation of selected relative navigation sensor technologies through testing and simulation, and to allow the CEV Project to assess the relative navigation sensors.

Automated Rendezvous and Docking Sensor Testing at the Flight Robotics Laboratory

NASA Technical Reports Server (NTRS)

Howard, Richard T.; Williamson, Marlin L.; Johnston, Albert S.; Brewster, Linda L.; Mitchell, Jennifer D.; Cryan, Scott P.; Strack, David; Key, Kevin

2007-01-01

The Exploration Systems Architecture defines missions that require rendezvous, proximity operations, and docking (RPOD) of two spacecraft both in Low Earth Orbit (LEO) and in Low Lunar Orbit (LLO). Uncrewed spacecraft must perform automated and/or autonomous rendezvous, proximity operations and docking operations (commonly known as Automated Rendezvous and Docking, (AR&D).) The crewed versions of the spacecraft may also perform AR&D, possibly with a different level of automation and/or autonomy, and must also provide the crew with relative navigation information for manual piloting. The capabilities of the RPOD sensors are critical to the success of the Exploration Program. NASA has the responsibility to determine whether the Crew Exploration Vehicle (CEV) contractor-proposed relative navigation sensor suite will meet the CEV requirements. The relatively low technology readiness of relative navigation sensors for AR&D has been carried as one of the CEV Projects top risks. The AR&D Sensor Technology Project seeks to reduce this risk by increasing technology maturation of selected relative navigation sensor technologies through testing and simulation, and to allow the CEV Project to assess the relative navigation sensors.

Pilot testing of a membrane system for postcombustion CO 2 capture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merkel, Tim; Kniep, Jay; Wei, Xiaotong

2015-09-30

This final report summarizes work conducted for the U.S. Department of Energy, National Energy Technology Laboratory (DOE) to scale up an efficient post-combustion CO 2 capture membrane process to the small pilot test stage (award number DE-FE0005795). The primary goal of this research program was to design, fabricate, and operate a membrane CO 2 capture system to treat coal-derived flue gas containing 20 tonnes CO 2/day (20 TPD). Membrane Technology and Research (MTR) conducted this project in collaboration with Babcock and Wilcox (B&W), the Electric Power Research Institute (EPRI), WorleyParsons (WP), the Illinois Sustainable Technology Center (ISTC), Enerkem (EK), andmore » the National Carbon Capture Center (NCCC). In addition to the small pilot design, build and slipstream testing at NCCC, other project efforts included laboratory membrane and module development at MTR, validation field testing on a 1 TPD membrane system at NCCC, boiler modeling and testing at B&W, a techno-economic analysis (TEA) by EPRI/WP, a case study of the membrane technology applied to a ~20 MWe power plant by ISTC, and an industrial CO 2 capture test at an Enerkem waste-to-biofuel facility. The 20 TPD small pilot membrane system built in this project successfully completed over 1,000 hours of operation treating flue gas at NCCC. The Polaris™ membranes used on this system demonstrated stable performance, and when combined with over 10,000 hours of operation at NCCC on a 1 TPD system, the risk associated with uncertainty in the durability of postcombustion capture membranes has been greatly reduced. Moreover, next-generation Polaris membranes with higher performance and lower cost were validation tested on the 1 TPD system. The 20 TPD system also demonstrated successful operation of a new low-pressure-drop sweep module that will reduce parasitic energy losses at full scale by as much as 10 MWe. In modeling and pilot boiler testing, B&W confirmed the viability of CO 2 recycle to the boiler as envisioned in the MTR process design. The impact of this CO 2 recycle on boiler efficiency was quantified and incorporated into a TEA of the membrane capture process applied to a full-scale power plant. As with previous studies, the TEA showed the membrane process to be lower cost than the conventional solvent capture process even at 90% CO 2capture. A sensitivity study indicates that the membrane capture cost decreases significantly if the 90% capture requirement is relaxed. Depending on the process design, a minimum capture cost is achieved at 30-60% capture, values that would meet proposed CO 2 emission regulations for coal-fired power plants. In summary, this project has successfully advanced the MTR membrane capture process through small pilot testing (technology readiness level 6). The technology is ready for future scale-up to the 10 MWe size.« less

Generation of Simulated Tracking Data for LADEE Operational Readiness Testing

NASA Technical Reports Server (NTRS)

Woodburn, James; Policastri, Lisa; Owens, Brandon

2015-01-01

Operational Readiness Tests were an important part of the pre-launch preparation for the LADEE mission. The generation of simulated tracking data to stress the Flight Dynamics System and the Flight Dynamics Team was important for satisfying the testing goal of demonstrating that the software and the team were ready to fly the operational mission. The simulated tracking was generated in a manner to incorporate the effects of errors in the baseline dynamical model, errors in maneuver execution and phenomenology associated with various tracking system based components. The ability of the mission team to overcome these challenges in a realistic flight dynamics scenario indicated that the team and flight dynamics system were ready to fly the LADEE mission. Lunar Atmosphere and Dust Environment.

Identifying the readiness of patients in implementing telemedicine in northern Louisiana for an oncology practice.

PubMed

Gurupur, Varadraj; Shettian, Kruparaj; Xu, Peixin; Hines, Scott; Desselles, Mitzi; Dhawan, Manish; Wan, Thomas Th; Raffenaud, Amanda; Anderson, Lindsey

2017-09-01

This study identified the readiness factors that may create challenges in the use of telemedicine among patients in northern Louisiana with cancer. To identify these readiness factors, the team of investigators developed 19 survey questions that were provided to the patients or to their caregivers. The team collected responses from 147 respondents from rural and urban residential backgrounds. These responses were used to identify the individuals' readiness for utilising telemedicine through factor analysis, Cronbach's alpha reliability test, analysis of variance and ordinary least squares regression. The analysis results indicated that the favourable factor (positive readiness item) had a mean value of 3.47, whereas the unfavourable factor (negative readiness item) had a mean value of 2.76. Cronbach's alpha reliability test provided an alpha value of 0.79. Overall, our study indicated a positive attitude towards the use of telemedicine in northern Louisiana.

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GEmore » EER (prime contractor) was awarded a Vision 21 program from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE EER, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on process modeling work, has an estimated process efficiency of 68%, based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal, and an estimated equivalent electrical efficiency of 60%. The Phase I R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the UFP technology. This is the tenth quarterly technical progress report for the Vision 21 UFP program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting January 1, 2003 and ending March 31, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale assembly, and program management.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Energy and Environmental Research Corporation (GE EER) has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GEmore » EER was awarded a Vision 21 program from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GE EER, California Energy Commission, Southern Illinois University at Carbondale, and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on process modeling work, has an estimated process efficiency of 68%, based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal, and an estimated equivalent electrical efficiency of 60%. The Phase I R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the UFP technology. This is the ninth quarterly technical progress report for the Vision 21 UFP program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting October 1, 2002 and ending December 31, 2002. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab- and bench-scale experimental testing, pilot-scale design and assembly, and program management.« less

FUEL-FLEXIBLE GASIFICATION-COMBUSTION TECHNOLOGY FOR PRODUCTION OF H2 AND SEQUESTRATION-READY CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Arnaldo Frydman

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research (GEGR) has developed an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GEGR (prime contractor) was awardedmore » a Vision 21 program from U.S. DOE NETL to develop the UFP technology. Work on this Phase I program started on October 1, 2000. The project team includes GEGR, Southern Illinois University at Carbondale (SIU-C), California Energy Commission (CEC), and T. R. Miles, Technical Consultants, Inc. In the UFP technology, coal/opportunity fuels and air are simultaneously converted into separate streams of (1) pure hydrogen that can be utilized in fuel cells, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure oxygen-depleted air to produce electricity in a gas turbine. The process produces near-zero emissions and, based on process modeling with best-case scenario assumptions, has an estimated process efficiency of 68%, based on electrical and H{sub 2} energy outputs relative to the higher heating value of coal, and an estimated equivalent electrical efficiency of 60%. The Phase I R&D program will determine the operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The program integrates lab-, bench- and pilot-scale studies to demonstrate the UFP technology. This is the eleventh quarterly technical progress report for the Vision 21 UFP program supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974). This report summarizes program accomplishments for the period starting April 1, 2003 and ending June 30, 2003. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including lab-scale experimental testing, pilot-scale assembly, and program management.« less

Using the Rasch Model to Determine Equivalence of Forms In the Trilingual Lollipop Readiness Test

ERIC Educational Resources Information Center

Lang, W. Steve; Chew, Alex L.; Crownover, Carol; Wilkerson, Judy R.

2007-01-01

Determining the cross-cultural equivalence of multilingual tests is a challenge that is more complex than simple horizontal equating of test forms. This study examines the functioning of a trilingual test of preschool readiness to determine the equivalence. Different forms of the test have previously been examined using classical statistical…

Validity of the Bracken School Readiness Assessment for Predicting First Grade Readiness

ERIC Educational Resources Information Center

Panter, Janet E.; Bracken, Bruce A.

2009-01-01

The Bracken School Readiness Assessment (BSRA) was administered to all kindergarten students enrolled in two rural elementary schools in the fall of 2004. Eight months later, the reading portion of the Metropolitan Readiness Tests, 6th Edition (MRT-6) was administered. Teachers were asked to indicate whether they had concerns about each student's…

Y2K compliance readiness and contingency planning.

PubMed

Stahl, S; Cohan, D

1999-09-01

As the millennium approaches, discussion of "Y2K compliance" will shift to discussion of "Y2K readiness." While "compliance" focuses on the technological functioning of one's own computers, "readiness" focuses on the operational planning required in a world of interdependence, in which the functionality of one's own computers is only part of the story. "Readiness" includes the ability to cope with potential Y2K failures of vendors, suppliers, staff, banks, utility companies, and others. Administrators must apply their traditional skills of analysis, inquiry and diligence to the manifold imaginable challenges which Y2K will thrust upon their facilities. The SPICE template can be used as a systematic tool to guide planning for this historic event.

TRL-6 for JWST wavefront sensing and control

NASA Astrophysics Data System (ADS)

Feinberg, Lee D.; Dean, Bruce H.; Aronstein, David L.; Bowers, Charles W.; Hayden, William; Lyon, Richard G.; Shiri, Ron; Smith, J. Scott; Acton, D. Scott; Carey, Larkin; Contos, Adam; Sabatke, Erin; Schwenker, John; Shields, Duncan; Towell, Tim; Shi, Fang; Meza, Luis

2007-09-01

NASA's Technology Readiness Level (TRL)-6 is documented for the James Webb Space Telescope (JWST) Wavefront Sensing and Control (WFSC) subsystem. The WFSC subsystem is needed to align the Optical Telescope Element (OTE) after all deployments have occurred, and achieves that requirement through a robust commissioning sequence consisting of unique commissioning algorithms, all of which are part of the WFSC algorithm suite. This paper identifies the technology need, algorithm heritage, describes the finished TRL-6 design platform, and summarizes the TRL-6 test results and compliance. Additionally, the performance requirements needed to satisfy JWST science goals as well as the criterion that relate to the TRL-6 Testbed Telescope (TBT) performance requirements are discussed.

TRL-6 for JWST Wavefront Sensing and Control

NASA Technical Reports Server (NTRS)

Feinberg, Lee; Dean, Bruce; Smith, Scott; Aronstein, David; Shiri, Ron; Lyon, Rick; Hayden, Bill; Bowers, Chuck; Acton, D. Scott; Shields, Duncan;

Readiness to perform testing : a critical analysis of the concept and current practices.

DOT National Transportation Integrated Search

1993-08-01

Readiness to Perform (RTP) testing has become an increasingly popular alternative to biochemical screening as a method for assessing risk factors (i.e., drug, alcohol, fatigue, etc.) in the workplace. The focus of RTP testing is on the assessment of ...

Readiness for Antiretroviral Therapy: Implications for Linking HIV-Infected Individuals to Care and Treatment.

PubMed

Maughan-Brown, Brendan; Smith, Philip; Kuo, Caroline; Harrison, Abigail; Lurie, Mark N; Bekker, Linda-Gail; Galárraga, Omar

2018-03-01

Using survey data collected immediately after referral for ART (N = 87), this study examined ART-readiness among individuals (18 years and older) attending a mobile health clinic in South Africa. Most participants reported being very ready (84%) and motivated (85%) to start ART, but only 72% were assessed as ready for ART on all measures. Treatment readiness was lower among individuals who did not think they would test HIV-positive (aOR 0.26, p < 0.05) and among individuals who reported being in good health (aOR 0.44, p < 0.1). In contrast, higher readiness was associated with better ART knowledge (aOR 4.31, p < 0.05) and knowing someone who had experienced positive health effects from ART (aOR 2.65, p < 0.05). Results indicate that post-test counselling will need to be designed to deal with surprise at HIV diagnosis, and that health messaging needs to be carefully crafted to support uptake of ART among HIV-positive but healthy individuals. Further research is needed on effective post-test counselling approaches and effective framing of health messaging to increase awareness of the multiple positive benefits of early ART initiation and corresponding readiness to engage in treatment.

Personalised Corruption: Testing, Cheating and Teacher-Integrity

ERIC Educational Resources Information Center

Yarker, Patrick

2008-01-01

The government's plans for students in KS2 and KS3 to be "tested when ready" mark an attempt further to embed instrumentalist views of education. "Testing-when-ready" is seen as an intensification of the harmful regime of testing, targets and League Tables which Mansell (2007) labels "hyper-accountability". Highlighting aspects of Mansell's book…

Standardized Tests of Handwriting Readiness: A Systematic Review of the Literature

ERIC Educational Resources Information Center

van Hartingsveldt, Margo J.; de Groot, Imelda J. M.; Aarts, Pauline B. M.; Nijhuis-van der Sanden, Maria W. G.

2011-01-01

Aim: To establish if there are psychometrically sound standardized tests or test items to assess handwriting readiness in 5- and 6-year-old children on the levels of occupations activities/tasks and performance. Method: Electronic databases were searched to identify measurement instruments. Tests were included in a systematic review if: (1)…

NASA's Carbon Monitoring System (CMS) Applications and Application Readiness Levels (ARLs)-An assessment of how all CMS ARLs provide societal benefit.

NASA Astrophysics Data System (ADS)

Escobar, V. M.; Sepulveda Carlo, E.; Delgado Arias, S.

2016-12-01

During the past six years, the NASA Carbon Monitoring System (CMS) Applications effort has been engaging with stakeholders in an effort to make the 52 CMS project user friendly and policy relevant. Congressionally directed, the CMS initiative is a NASA endeavor providing carbon data products that help characterize and understand carbon sources and sinks at local and international scales. All data are freely available, and scaled for local, state, regional, national and international-level resource management. To facilitate user feedback during development, as well as understanding for the type of use and application the CMS data products can provide, the Applications project utilizes the NASA Applied Sciences Program nine step Application Readiness Level (ARL) indices. These are used to track and manage the progression and distribution of funded projects. ARLs are an adaptation of NASA's technology readiness levels (TRLs) used for managing technology and risk and reflects the three main tiers of a project: research, development and deployment. The ARLs are scaled from 1 to 9, research and development (ARL1) to operational and/or decision making ready products (ARL9). The ARLS can be broken up into three phases: Phase 1, discovery and feasibility (ARL 1-3); Phase 2, development testing and validation (ARL 4-6); and Phase 3, integration into Partner's systems (ARL 7-9). The ARLs are designed to inform both scientist and end user of the product maturity and application capability. The CMS initiative has products that range across all ARLs, providing societal benefit at multiple scales. Lower ARLs contribute to formal documents such as the IPCC while others at higher levels provide decision support quantifying the value of carbon data for greenhouse gas (GHG) reduction planning. Most CMS products have an ARL 5, (validation of a product in a relevant environment), meaning the CMS carbon science is actively in a state of science-user engagement. For the user community, ARLs are a litmus test for knowing the type of user feedback and advocacy that can be implemented into the product design. For the scientist, ARLS help communicate (1) the maturity of their science to users who would like to use it for decision making and (2) the intended use of the product.

Empowering School Teachers for Emerging Technologies: An Action Plan

ERIC Educational Resources Information Center

Misra, Pradeep Kumar

2010-01-01

"Possessing openness to emerging technologies is critical for teachers in the technology-rich 21st Century as technology continues to accelerate at a rapid rate. Readiness for new technologies is a challenge associated with change. Teachers who resist change may impede and/or limit their students' learning and skills. Teachers, therefore,…

A Professional Learning Program Designed to Increase K-12 Teachers' Instructional Technology Use

ERIC Educational Resources Information Center

Spencer, Lisa A.

2014-01-01

Despite the ready availability of many instructional-technology resources, many teachers in the researched Maryland school district are uncomfortable using technology to deliver content. This concurrent mixed methods case study examined the impact of Sharing Technology with Educators Program (STEP) on 269 K-12 teachers' technology use. The study…

MSFC Technology Year in Review 2015

NASA Technical Reports Server (NTRS)

Reynolds, David; Tinker, Mike

2015-01-01

MSFC has a strong diverse portfolio of technology development projects, ranging from flight projects to very low Technology Readiness Level (TRL) laboratory projects. The 2015 Year in Review highlights the Center's technology projects and celebrates their accomplishments to raise awareness of technology development work that is integral to the success of future Agency flight programs.

Raising Nuclear Thermal Propulsion (NTP) Technology Readiness Above 3

NASA Technical Reports Server (NTRS)

Gerrish, Harold P., Jr.

2014-01-01

NTP development is currently supported by the NASA program office "Advanced Exploration Systems". The concept is a main propulsion option being considered for human missions to Mars in the 2030's. Major NTP development took place in the 1960's and 1970's under the Rover/NERVA program. The technology had matured to TRL 6 and was preparing to go to TRL 7 with a prototype flight engine before the program was cancelled. Over the last 40 years, a variety of continuations started, but only lasted a few years each. The Rover/NERVA infrastructure is almost all gone. The only remains are a few pieces of hardware, final reports and a few who worked the Rover/NERVA. Two types of nuclear fuel are being investigated to meet the current engine design specific impulse of 900 seconds compared to approximately 850 seconds demonstrated during Rover/NERVA. One is a continuation of composite fuel with new coatings to better control mid-band corrosion. The other type is a CERMET fuel made of Tungsten and UO2. Both fuels are being made from Rover/NERVA lessons learned, but with slightly different recipes to increase fuel endurance at higher operating temperatures. The technology readiness level (TRL) of these current modified reactor fuels is approximately TRL 3. To keep the development cost low and help mature the TRL level past 4 quickly, a few special non-nuclear test facilities have been made to test surrogate fuel, with depleted uranium, as coupons and full length elements. Both facilities utilize inductive heating and are licensed to handle depleted uranium. TRL 5 requires exposing the fuel to a nuclear environment and TRL 6 requires a prototype ground or flight engine system test. Currently, three different NTP ground test facility options are being investigated: exhaust scrubber, bore hole, and total exhaust containment. In parallel, a prototype flight demonstration test is also being studied. The first human mission to Mars in the 2030's is currently 2033. For an advanced propulsion concept to be seriously considered for use, the engine development plans need to show it is feasible and affordable to reach TRL 8 by 2027 and can be qualified for human mission use.

TECHcitement: Advances in Technological Education, 2007

ERIC Educational Resources Information Center

Patton, Madeline

2007-01-01

This publication presents the following nine articles: (1) ATE [Advanced Technological Education] Readies Technicians for International Competition; (2) Technicians in Demand Worldwide; (3) Accreditation Board for Engineering and Technology Endorses International Protocols for Technicians; (4) Entrepreneurial Educator Creates InnovaBio to Meet…

Getting Closer to Countdown: Spacecraft Undergoes Readiness Tests

NASA Image and Video Library

2005-07-19

It no easy task getting NASA Mars Reconnaissance Orbiter ready for launch. Workers stabilize the crane holding one of the enormous billboard-sized solar panels temporarily removed from the spacecraft prior to rigorous testing.

Affordable and Lightweight High-Resolution X-ray Optics for Astronomical Missions

NASA Technical Reports Server (NTRS)

Zhang, W. W.; Biskach, M. P.; Bly, V. T.; Carter, J. M.; Chan, K. W.; Gaskin, J. A.; Hong, M.; Hohl, B. R.; Jones, W. D.; Kolodziejczak, J. J.

2014-01-01

Future x-ray astronomical missions require x-ray mirror assemblies that provide both high angular resolution and large photon collecting area. In addition, as x-ray astronomy undertakes more sensitive sky surveys, a large field of view is becoming increasingly important as well. Since implementation of these requirements must be carried out in broad political and economical contexts, any technology that meets these performance requirements must also be financially affordable and can be implemented on a reasonable schedule. In this paper we report on progress of an x-ray optics development program that has been designed to address all of these requirements. The program adopts the segmented optical design, thereby is capable of making both small and large mirror assemblies for missions of any size. This program has five technical elements: (1) fabrication of mirror substrates, (2) coating, (3) alignment, (4) bonding, and (5) mirror module systems engineering and testing. In the past year we have made progress in each of these five areas, advancing the angular resolution of mirror modules from 10.8 arc-seconds half-power diameter reported (HPD) a year ago to 8.3 arc-seconds now. These mirror modules have been subjected to and passed all environmental tests, including vibration, acoustic, and thermal vacuum. As such this technology is ready for implementing a mission that requires a 10-arc-second mirror assembly. Further development in the next two years would make it ready for a mission requiring a 5-arc-second mirror assembly. We expect that, by the end of this decade, this technology would enable the x-ray astrophysical community to compete effectively for a major x-ray mission in the 2020s that would require one or more 1-arc-second mirror assemblies for imaging, spectroscopic, timing, and survey studies.

Delivery of Colloid Micro-Newton Thrusters for the Space Technology 7 Mission

NASA Technical Reports Server (NTRS)

Ziemer, John K.; Randolph, Thomas M.; Franklin, Garth W.; Hruby, Vlad; Spence, Douglas; Demmons, Nathaniel; Roy, Thomas; Ehrbar, Eric; Zwahlen, Jurg; Martin, Roy;

Space solar cell technology development - A perspective

NASA Technical Reports Server (NTRS)

Scott-Monck, J.

1982-01-01

The developmental history of photovoltaics is examined as a basis for predicting further advances to the year 2000. Transistor technology was the precursor of solar cell development. Terrestrial cells were modified for space through changes in geometry and size, as well as the use of Ag-Ti contacts and manufacture of a p-type base. The violet cell was produced for Comsat, and involved shallow junctions, new contacts, and an enhanced antireflection coating for better radiation tolerance. The driving force was the desire by private companies to reduce cost and weight for commercial satellite power supplies. Liquid phase epitaxial (LPE) GaAs cells are the latest advancement, having a 4 sq cm area and increased efficiency. GaAs cells are expected to be flight ready in the 1980s. Testing is still necessary to verify production techniques and the resistance to electron and photon damage. Research will continue in CVD cell technology, new panel technology, and ultrathin Si cells.

JWST Lightweight Mirror TRL-6 Results

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2007-01-01

Mirror technology for a Primary Mirror Segment Assembly (PMSA) is a system of components: reflective coating; polished optical surface; mirror substrate; actuators, mechanisms and flexures; and reaction structure. The functional purpose of a PMSA is to survive launch, deploy and align itself to form a 25 square meter collecting area 6.5 meter diameter primary mirror with a 131 nm rms wavefront error at temperatures less than 50K and provide stable optical performance for the anticipated thermal environment. At the inception of JWST in 1996, such a capability was at a Technology Readiness Level (TRL) of 3. A highly successful technology development program was initiated including the Sub-scale Beryllium Mirror Demonstrator (SBMD) and Advanced Mirror System Demonstrator (AMSD) projects. These projects along with flight program activities have matured mirror technology for JWST to TRL-6. A directly traceable prototype (and in some cases the flight hardware itself) has been built, tested and operated in a relevant environment.

Ready, Set, Change! Development and usability testing of an online readiness for change decision support tool for healthcare organizations.

PubMed

Timmings, Caitlyn; Khan, Sobia; Moore, Julia E; Marquez, Christine; Pyka, Kasha; Straus, Sharon E

2016-02-24

To address challenges related to selecting a valid, reliable, and appropriate readiness assessment measure in practice, we developed an online decision support tool to aid frontline implementers in healthcare settings in this process. The focus of this paper is to describe a multi-step, end-user driven approach to developing this tool for use during the planning stages of implementation. A multi-phase, end-user driven approach was used to develop and test the usability of a readiness decision support tool. First, readiness assessment measures that are valid, reliable, and appropriate for healthcare settings were identified from a systematic review. Second, a mapping exercise was performed to categorize individual items of included measures according to key readiness constructs from an existing framework. Third, a modified Delphi process was used to collect stakeholder ratings of the included measures on domains of feasibility, relevance, and likelihood to recommend. Fourth, two versions of a decision support tool prototype were developed and evaluated for usability. Nine valid and reliable readiness assessment measures were included in the decision support tool. The mapping exercise revealed that of the nine measures, most measures (78 %) focused on assessing readiness for change at the organizational versus the individual level, and that four measures (44 %) represented all constructs of organizational readiness. During the modified Delphi process, stakeholders rated most measures as feasible and relevant for use in practice, and reported that they would be likely to recommend use of most measures. Using data from the mapping exercise and stakeholder panel, an algorithm was developed to link users to a measure based on characteristics of their organizational setting and their readiness for change assessment priorities. Usability testing yielded recommendations that were used to refine the Ready, Set, Change! decision support tool . Ready, Set, Change! decision support tool is an implementation support that is designed to facilitate the routine incorporation of a readiness assessment as an early step in implementation. Use of this tool in practice may offer time and resource-saving implications for implementation.

Environmental, Economic, and Scalability Considerations and Trends of Selected Fuel Economy-Enhancing Biomass-Derived Blendstocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunn, Jennifer B.; Biddy, Mary; Jones, Susanne

Twenty-four biomass-derived compounds and mixtures, identified based on their physical properties, which could be blended into fuels to improve spark ignition engine fuel economy, were assessed for their economic, technology readiness, and environmental viability. These bio-blendstocks were modeled to be produced biochemically, thermochemically, or through hybrid processes. To carry out the assessment, 17 metrics were developed for which each bio-blendstock was determined to be favorable, neutral, or unfavorable. Cellulosic ethanol was included as a reference case. Overall economic and, to some extent, environmental viability is driven by projected yields for each of these processes. The metrics used in this analysismore » methodology highlight the near-term potential to achieve these targeted yield estimates when considering data quality and current technical readiness for these conversion strategies. Key knowledge gaps included the degree of purity needed for use as a bio-blendstock. Less stringent purification requirements for fuels could cut processing costs and environmental impacts. Additionally, more information is needed on the blending behavior of many of these bio-blendstocks with gasoline to support the technology readiness evaluation. Altogether, the technology to produce many of these blendstocks from biomass is emerging, and as it matures, these assessments must be revisited. Importantly, considering economic, environmental, and technology readiness factors, in addition to physical properties of blendstocks that could be used to boost engine efficiency and fuel economy, in the early stages of project research and development can help spotlight those most likely to be viable in the near term.« less

Environmental, Economic, and Scalability Considerations and Trends of Selected Fuel Economy-Enhancing Biomass-Derived Blendstocks

DOE PAGES

Dunn, Jennifer B.; Biddy, Mary; Jones, Susanne; ...

2017-10-30

Twenty-four biomass-derived compounds and mixtures, identified based on their physical properties, which could be blended into fuels to improve spark ignition engine fuel economy, were assessed for their economic, technology readiness, and environmental viability. These bio-blendstocks were modeled to be produced biochemically, thermochemically, or through hybrid processes. To carry out the assessment, 17 metrics were developed for which each bio-blendstock was determined to be favorable, neutral, or unfavorable. Cellulosic ethanol was included as a reference case. Overall economic and, to some extent, environmental viability is driven by projected yields for each of these processes. The metrics used in this analysismore » methodology highlight the near-term potential to achieve these targeted yield estimates when considering data quality and current technical readiness for these conversion strategies. Key knowledge gaps included the degree of purity needed for use as a bio-blendstock. Less stringent purification requirements for fuels could cut processing costs and environmental impacts. Additionally, more information is needed on the blending behavior of many of these bio-blendstocks with gasoline to support the technology readiness evaluation. Altogether, the technology to produce many of these blendstocks from biomass is emerging, and as it matures, these assessments must be revisited. Importantly, considering economic, environmental, and technology readiness factors, in addition to physical properties of blendstocks that could be used to boost engine efficiency and fuel economy, in the early stages of project research and development can help spotlight those most likely to be viable in the near term.« less

The effect of alcohol and fatigue on an FAA readiness-to-perform test.

DOT National Transportation Integrated Search

1995-08-01

Readiness to perform (RTP) testing is considered by some to be a broad-based alternative or supplement to biochemical testing for drugs and alcohol. Since it is also thought to detect impairment due to other sources (e.g., fatigue, illness, depressio...

CMC thermal protection system for future reusable launch vehicles: Generic shingle technological maturation and tests

NASA Astrophysics Data System (ADS)

Pichon, T.; Barreteau, R.; Soyris, P.; Foucault, A.; Parenteau, J. M.; Prel, Y.; Guedron, S.

2009-07-01

Experimental re-entry demonstrators are currently being developed in Europe, with the objective of increasing the technology readiness level (TRL) of technologies applicable to future reusable launch vehicles. Among these are the Pre-X programme, currently funded by CNES, the French Space Agency, and which is about to enter into development phase B, and the IXV, within the future launcher preparatory programme (FLPP) funded by ESA. One of the major technologies necessary for such vehicles is the thermal protection system (TPS), and in particular the ceramic matrix composites (CMC) based windward TPS. In support of this goal, technology maturation activities named "generic shingle" were initiated beginning of 2003 by SPS, under a CNES contract, with the objective of performing a test campaign of a complete shingle of generic design, in preparation of the development of a re-entry experimental vehicle decided in Europe. The activities performed to date include: the design, manufacturing of two C/SiC panels, finite element model (FEM) calculation of the design, testing of technological samples extracted from a dedicated panel, mechanical pressure testing of a panel, and a complete study of the attachment system. Additional testing is currently under preparation on the panel equipped with its insulation, seal, attachment device, and representative portion of cold structure, to further assess its behaviour in environments relevant to its application The paper will present the activities that will have been performed in 2006 on the prediction and preparation of these modal characterization, dynamic, acoustic as well as thermal and thermo-mechanical tests. Results of these tests will be presented and the lessons learned will be discussed.

Pre-Launch End-to-End Testing Plans for the SPAce Readiness Coherent Lidar Experiment (SPARCLE)

NASA Technical Reports Server (NTRS)

Kavaya, Michael J.

1999-01-01

The SPAce Readiness Coherent Lidar Experiment (SPARCLE) mission was proposed as a low cost technology demonstration mission, using a 2-micron, 100-mJ, 6-Hz, 25-cm, coherent lidar system based on demonstrated technology. SPARCLE was selected in late October 1997 to be NASA's New Millennium Program (NMP) second earth-observing (EO-2) mission. To maximize the success probability of SPARCLE, NASA/MSFC desired expert guidance in the areas of coherent laser radar (CLR) theory, CLR wind measurement, fielding of CLR systems, CLR alignment validation, and space lidar experience. This led to the formation of the NASA/MSFC Coherent Lidar Technology Advisory Team (CLTAT) in December 1997. A threefold purpose for the advisory team was identified as: 1) guidance to the SPARCLE mission, 2) advice regarding the roadmap of post-SPARCLE coherent Doppler wind lidar (CDWL) space missions and the desired matching technology development plan 3, and 3) general coherent lidar theory, simulation, hardware, and experiment information exchange. The current membership of the CLTAT is shown. Membership does not result in any NASA or other funding at this time. We envision the business of the CLTAT to be conducted mostly by email, teleconference, and occasional meetings. The three meetings of the CLTAT to date, in Jan. 1998, July 1998, and Jan. 1999, have all been collocated with previously scheduled meetings of the Working Group on Space-Based Lidar Winds. The meetings have been very productive. Topics discussed include the SPARCLE technology validation plan including pre-launch end-to-end testing, the space-based wind mission roadmap beyond SPARCLE and its implications on the resultant technology development, the current values and proposed future advancement in lidar system efficiency, and the difference between using single-mode fiber optical mixing vs. the traditional free space optical mixing. attitude information from lidar and non-lidar sensors, and pointing knowledge algorithms will meet this second requirement. The topic of this paper is the pre-launch demonstration of the first requirement, adequate sensitivity of the SPARCLE lidar.

Thermal management for high power space platform systems

NASA Technical Reports Server (NTRS)

Gualdoni, R. A.

1980-01-01

With future spacecraft power requirements expected to be in the order of 100 to 250 kilowatts and orbital lifetimes in the order of five to ten years, new approaches and concepts will be required that can efficiently and cost effectively provide the required heat rejection and temperature control capabilities. A plan was established to develop the commensurate technologies necessary for the thermal management of a high power space platform representative of future requirements and to achieve technology readiness by 1987. The approach taken in developing the program was to view the thermal requirements of the spacecraft as a spacecraft system rather than each as an isolated thermal problem. The program plan proposes 45 technology tasks required to achieve technology readiness. Of this total, 24 tasks were subsequently identified as being pacing technology tasks and were recommended for initiation in FY 1980 and FY 1981.

Possibility to Use Mobile Learning to Promote World Heritage Site Preservation Awareness in Luang Prabang, Lao Pdr: a Readiness Study

NASA Astrophysics Data System (ADS)

Poong, Y. S.; Yamaguchi, S.; Takada, J.

2013-07-01

This paper elucidates the current state of mobile technology readiness among young adults in higher education institution based on surveys and interviews. Although Lao PDR is ranked as low category in the ICT Index by International Telecommunication Union (ITU), findings show that there exists high level of readiness among the young adults. Recommendations for future research are developed to guide the development of mobile learning application with the aim to promote World Heritage Site preservation awareness.

Emerging Technologies Integrating Technology into Study Abroad

ERIC Educational Resources Information Center

Godwin-Jones, Robert

2016-01-01

"Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

Analysis of e-learning implementation readiness based on integrated elr model

NASA Astrophysics Data System (ADS)

Adiyarta, K.; Napitupulu, D.; Rahim, R.; Abdullah, D.; Setiawan, MI

2018-04-01

E-learning nowadays has become a requirement for institutions to support their learning activities. To adopt e-learning, an institution requires a large strategy and resources for optimal application. Unfortunately, not all institutions that have used e-learning got the desired results or expectations. This study aims to identify the extent of the level of readiness of e-learning implementation in institution X. The degree of institutional readiness will determine the success of future e-learning utilization. In addition, institutional readiness measurement are needed to evaluate the effectiveness of strategies in e-learning development. The research method used is survey with questionnaire designed based on integration of 8 best practice ELR (e-learning readiness) model. The results showed that from 13 factors of integrated ELR model being measured, there are 3 readiness factors included in the category of not ready and needs a lot of work. They are human resource (2.57), technology skill (2.38) and content factors (2.41). In general, e-learning implementation in institutions is in the category of not ready but needs some of work (3.27). Therefore, the institution should consider which factors or areas of ELR factors are considered still not ready and needs improvement in the future.

Consumer behaviors towards ready-to-eat foods based on food-related lifestyles in Korea

PubMed Central

Bae, Hyun-Joo; Chae, Mi-Jin

2010-01-01

The purpose of this study was to examine consumers' behaviors toward ready-to-eat foods and to develop ready-to-eat food market segmentation in Korea. The food-related lifestyle and purchase behaviors of ready-to-eat foods were evaluated using 410 ready-to-eat food consumers in the Republic of Korea. Four factors were extracted by exploratory factor analysis (health-orientation, taste-orientation, convenience-orientation, and tradition-orientation) to explain the ready-to eat food consumers' food-related lifestyles. The results of cluster analysis indicated that "tradition seekers" and "convenience seekers" should be regarded as the target segments. Chi-square tests and t-tests of the subdivided groups showed there were significant differences across marital status, education level, family type, eating-out expenditure, place of purchase, and reason for purchase. In conclusion, the tradition seekers consumed more ready-to-eat foods from discount marts or specialty stores and ate them between meals more often than the convenience seekers. In contrast, the convenience seekers purchased more ready-to-eat foods at convenience stores and ate them as meals more often than the tradition seekers. These findings suggest that ready-to-eat food market segmentation based on food-related lifestyles can be applied to develop proper marketing strategies. PMID:20827350

Consumer behaviors towards ready-to-eat foods based on food-related lifestyles in Korea.

PubMed

Bae, Hyun-Joo; Chae, Mi-Jin; Ryu, Kisang

2010-08-01

The purpose of this study was to examine consumers' behaviors toward ready-to-eat foods and to develop ready-to-eat food market segmentation in Korea. The food-related lifestyle and purchase behaviors of ready-to-eat foods were evaluated using 410 ready-to-eat food consumers in the Republic of Korea. Four factors were extracted by exploratory factor analysis (health-orientation, taste-orientation, convenience-orientation, and tradition-orientation) to explain the ready-to eat food consumers' food-related lifestyles. The results of cluster analysis indicated that "tradition seekers" and "convenience seekers" should be regarded as the target segments. Chi-square tests and t-tests of the subdivided groups showed there were significant differences across marital status, education level, family type, eating-out expenditure, place of purchase, and reason for purchase. In conclusion, the tradition seekers consumed more ready-to-eat foods from discount marts or specialty stores and ate them between meals more often than the convenience seekers. In contrast, the convenience seekers purchased more ready-to-eat foods at convenience stores and ate them as meals more often than the tradition seekers. These findings suggest that ready-to-eat food market segmentation based on food-related lifestyles can be applied to develop proper marketing strategies.

High Data Rate Instrument Study

NASA Technical Reports Server (NTRS)

Schober, Wayne; Lansing, Faiza; Wilson, Keith; Webb, Evan

1999-01-01

The High Data Rate Instrument Study was a joint effort between the Jet Propulsion Laboratory (JPL) and the Goddard Space Flight Center (GSFC). The objectives were to assess the characteristics of future high data rate Earth observing science instruments and then to assess the feasibility of developing data processing systems and communications systems required to meet those data rates. Instruments and technology were assessed for technology readiness dates of 2000, 2003, and 2006. The highest data rate instruments are hyperspectral and synthetic aperture radar instruments which are capable of generating 3.2 Gigabits per second (Gbps) and 1.3 Gbps, respectively, with a technology readiness date of 2003. These instruments would require storage of 16.2 Terebits (Tb) of information (RF communications case of two orbits of data) or 40.5 Tb of information (optical communications case of five orbits of data) with a technology readiness date of 2003. Onboard storage capability in 2003 is estimated at 4 Tb; therefore, all the data created cannot be stored without processing or compression. Of the 4 Tb of stored data, RF communications can only send about one third of the data to the ground, while optical communications is estimated at 6.4 Tb across all three technology readiness dates of 2000, 2003, and 2006 which were used in the study. The study includes analysis of the onboard processing and communications technologies at these three dates and potential systems to meet the high data rate requirements. In the 2003 case, 7.8% of the data can be stored and downlinked by RF communications while 10% of the data can be stored and downlinked with optical communications. The study conclusion is that only 1 to 10% of the data generated by high data rate instruments will be sent to the ground from now through 2006 unless revolutionary changes in spacecraft design and operations such as intelligent data extraction are developed.

Experimentation for the Maturation of Deep Space Cryogenic Refueling Technologies

NASA Technical Reports Server (NTRS)

Chato, David J.

2008-01-01

This report describes the results of the "Experimentation for the Maturation of Deep Space Cryogenic Refueling Technology" study. This study identifies cryogenic fluid management technologies that require low-gravity flight experiments bring technology readiness levels to 5 to 6; examines many possible flight experiment options; and develops near-term low-cost flight experiment concepts to mature the core technologies. A total of 25 white papers were prepared by members of the project team in the course of this study. The full text of each white paper is included and 89 relevant references are cited. The team reviewed the white papers that provided information on new or active concepts of experiments to pursue and assessed them on the basis of technical need, cost, return on investment, and flight platform. Based on on this assessment the "Centaur Test Bed for Cryogenic Fluid Management" was rated the highest. "Computational Opportunities for Cryogenics for Cryogenic and Low-g Fluid Systems" was ranked second, based on its high scores in state of the art and return on investment, even though scores in cost and time were second to last. "Flight Development Test Objective Approach for In-space Propulsion Elements" was ranked third.

The Effects of Molecular Properties on Ready Biodegradation of Aromatic Compounds in the OECD 301B CO2 Evolution Test.

PubMed

He, Mei; Mei, Cheng-Fang; Sun, Guo-Ping; Li, Hai-Bei; Liu, Lei; Xu, Mei-Ying

2016-07-01

Ready biodegradation is the primary biodegradability of a compound, which is used for discriminating whether a compound could be rapidly and readily biodegraded in the natural ecosystems in a short period and has been applied extensively in the environmental risk assessment of many chemicals. In this study, the effects of 24 molecular properties (including 2 physicochemical parameters, 10 geometrical parameters, 6 topological parameters, and 6 electronic parameters) on the ready biodegradation of 24 kinds of synthetic aromatic compounds were investigated using the OECD 301B CO2 Evolution test. The relationship between molecular properties and ready biodegradation of these aromatic compounds varied with molecular properties. A significant inverse correlation was found for the topological parameter TD, five geometrical parameters (Rad, CAA, CMA, CSEV, and N c), and the physicochemical parameter K ow, and a positive correlation for two topological parameters TC and TVC, whereas no significant correlation was observed for any of the electronic parameters. Based on the correlations between molecular properties and ready biodegradation of these aromatic compounds, the importance of molecular properties was demonstrated as follows: geometrical properties > topological properties > physicochemical properties > electronic properties. Our study first demonstrated the effects of molecular properties on ready biodegradation by a number of experiment data under the same experimental conditions, which should be taken into account to better guide the ready biodegradation tests and understand the mechanisms of the ready biodegradation of aromatic compounds.

Deformed Shape Analysis of Coupled Glazing Systems

DTIC Science & Technology

2013-09-01

Tyndall Air Force Base, Florida, USA ABSTRACT Glazing in storefront and curtain wall configurations is increasingly used in areas subjected to... AIR FORCE CIVIL ENGINEER CENTER READINESS DIRECTORATE  Requirements & Acquisition Division  United States Air Force  Tyndall Air Force...Antonio, Texas; %Omaha, Nebraska #Jacobs Technology, Fort Walton Beach, Florida Air Force Civil Engineer Center Readiness Directorate Requirements

Ready to learn physics: a team-based learning model for first year university

NASA Astrophysics Data System (ADS)

Parappilly, Maria; Schmidt, Lisa; De Ritter, Samantha

2015-09-01

Team-based learning (TBL) is an established model of group work which aims to improve students' ability to apply discipline-related content. TBL consists of a readiness assurance process (RAP), student groups and application activities. While TBL has not been implemented widely in science, technology, engineering and mathematics disciplines, it has been effective in improving student learning in other disciplines. This paper describes the incorporation of TBL activities into a non-calculus based introductory level physics topic—Physics for the Modern World. Students were given pre-class preparation materials and an individual RAP online test before the workshops. The pre-workshop individual RAP test ensured that all students were exposed to concept-based questions before their workshops and motivated them to use the preparatory materials in readiness for the workshop. The students were placed into random teams and during the first part of the workshop, the teams went through a subset of the quiz questions (team RAP test) and in the remaining time, teams completed an in-class assignment. After the workshop students were allowed another attempt at the individual RAP test to see if their knowledge had improved. The ability of TBL to promote student learning of key concepts was evaluated by experiment using pre- and post- testing. The students’ perception of TBL was monitored by discussion posts and survey responses. Finally, the ability of TBL to support peer-peer interaction was evaluated by video analysis of the class. We found that the TBL process improved student learning; students did interact with each other in class; and the students had a positive view of TBL. To assess the transferability of this model to other topics, we conducted a comparison study with an environmental science topic which produced similar results. Our study supports the use of this TBL model in science topics.

The Validity of IQ Scores Derived from Readiness Screening Tests

ERIC Educational Resources Information Center

Telegdy, Gabriel A.

1976-01-01

The Screening Test of Academic Readiness (STAR) and the Peabody Picture Vocabulary Test (PPVT) were administered to 52 kindergarten children to reveal the convergent validity of IQ scores derived from the STAR. The findings raise doubts about the validity of the deviation IQs derived from the STAR. (Author)

REPORT OF ON-SITE INSPECTION WORKSHOP-16

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweeney, J J

2009-07-07

The central issue addressed by this workshop was the task of making the on-site inspection (OSI) part of the Comprehensive Nuclear-Test-Ban Treaty verification system operationally ready at entry into force of the Treaty. It is recognized, and this was emphasized by the 2008 OSI Integrated Field Exercise (IFE), that it is not possible to develop every part of the OSI regime simultaneously. Therefore, it is necessary to prioritize the approach to OSI readiness. The reviews of the IFE have pointed to many elements of OSI readiness that still need development. The objective of this workshop was to provide priorities formore » the path forward for Working Group B to consider. Several critical areas have been identified that are related to the development of OSI readiness: (1) Technology development: Priorities are radionuclide and noble gas sampling and analysis, visual observation, multispectral/infrared imaging methods, active seismic methods and the recognition of the importance of signatures. (2) Organizational development: Priorities are health and safety, the Operations Support Centre, the Equipment Storage and Maintenance Facility, information technology data flow and communications. (3) Resources: The expertise to develop key parts of the OSI regime is not available within the current OSI Division staff. To develop these aspects of the regime will require more staff or supplements to the staff with cost-free experts or other means. Aspects of the system that could benefit from more staff include radionuclide and noble gas detection methods, data flow and communications, visual observation, multispectral/infrared methods and health and safety. As the path forward, participants of this workshop recognized a need to optimize the development of OSI priorities. The outcome of this workshop is to suggest for consideration an operational approach to OSI readiness that utilizes results of an evaluation of the relative effectiveness of OSI elements versus their relative maturity. By integrating such an assessment with considerations of integrated operational capabilities and the anticipated level of inspection team self-sufficiency and measurable milestone criteria, a set of priorities for OSI development can be developed. Once these priorities have been established, the Policy Making Organs can decide upon the milestones, strategic plan and action plan to serve as guidance for implementation by the Provisional Technical Secretariat. The suggested operational approach is as follows: (1) Assess the relative effectiveness (importance) of OSI elements versus their relative maturity; (2) Determine the anticipated level of self-sufficiency; (3) Define measurable milestone criteria; and (4) Result: Milestones for OSI readiness.« less

Fuel-Flexible Gasification-Combustion Technology for Production of H2 and Sequestration-Ready CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Parag Kulkarni; Wei Wei

It is expected that in the 21st century the Nation will continue to rely on fossil fuels for electricity, transportation, and chemicals. It will be necessary to improve both the process efficiency and environmental impact performance of fossil fuel utilization. GE Global Research is developing an innovative fuel-flexible Unmixed Fuel Processor (UFP) technology to produce H{sub 2}, power, and sequestration-ready CO{sub 2} from coal and other solid fuels. The UFP module offers the potential for reduced cost, increased process efficiency relative to conventional gasification and combustion systems, and near-zero pollutant emissions including NO{sub x}. GE was awarded a contract frommore » U.S. DOE NETL to develop the UFP technology. Work on the Phase I program started in October 2000, and work on the Phase II effort started in April 2005. In the UFP technology, coal and air are simultaneously converted into separate streams of (1) high-purity hydrogen that can be utilized in fuel cells or turbines, (2) sequestration-ready CO{sub 2}, and (3) high temperature/pressure vitiated air to produce electricity in a gas turbine. The process produces near-zero emissions with an estimated efficiency higher than IGCC with conventional CO2 separation. The Phase I R&D program established the feasibility of the integrated UFP technology through lab-, bench- and pilot-scale testing and investigated operating conditions that maximize separation of CO{sub 2} and pollutants from the vent gas, while simultaneously maximizing coal conversion efficiency and hydrogen production. The Phase I effort integrated experimental testing, modeling and preliminary economic studies to demonstrate the UFP technology. The Phase II effort will focus on three high-risk areas: economics, sorbent attrition and lifetime, and product gas quality for turbines. The economic analysis will include estimating the capital cost as well as the costs of hydrogen and electricity for a full-scale UFP plant. These costs will be benchmarked with IGCC polygen costs for plants of similar size. Sorbent attrition and lifetime will be addressed via bench-scale experiments that monitor sorbent performance over time and by assessing materials interactions at operating conditions. The product gas from the third reactor (high-temperature vitiated air) will be evaluated to assess the concentration of particulates, pollutants and other impurities relative to the specifications required for gas turbine feed streams. This is the eighteenth quarterly technical progress report for the UFP program, which is supported by U.S. DOE NETL (Contract No. DE-FC26-00FT40974) and GE. This report summarizes program accomplishments for the Phase II period starting July 01, 2005 and ending September 30, 2005. The report includes an introduction summarizing the UFP technology, main program tasks, and program objectives; it also provides a summary of program activities and accomplishments covering progress in tasks including process modeling, scale-up and economic analysis.« less

Technology Readiness Level Assessment Process as Applied to NASA Earth Science Missions

NASA Technical Reports Server (NTRS)

Leete, Stephen J.; Romero, Raul A.; Dempsey, James A.; Carey, John P.; Cline, Helmut P.; Lively, Carey F.

2015-01-01

Technology assessments of fourteen science instruments were conducted within NASA using the NASA Technology Readiness Level (TRL) Metric. The instruments were part of three NASA Earth Science Decadal Survey missions in pre-formulation. The Earth Systematic Missions Program (ESMP) Systems Engineering Working Group (SEWG), composed of members of three NASA Centers, provided a newly modified electronic workbook to be completed, with instructions. Each instrument development team performed an internal assessment of its technology status, prepared an overview of its instrument, and completed the workbook with the results of its assessment. A team from the ESMP SEWG met with each instrument team and provided feedback. The instrument teams then reported through the Program Scientist for their respective missions to NASA's Earth Science Division (ESD) on technology readiness, taking the SEWG input into account. The instruments were found to have a range of TRL from 4 to 7. Lessons Learned are presented; however, due to the competition-sensitive nature of the assessments, the results for specific missions are not presented. The assessments were generally successful, and produced useful results for the agency. The SEWG team identified a number of potential improvements to the process. Particular focus was on ensuring traceability to guiding NASA documents, including the NASA Systems Engineering Handbook. The TRL Workbook has been substantially modified, and the revised workbook is described.

Clean Energy Technologies Ready for Climate Change Challenge

Science.gov Websites

environmental problems is well founded, the director of the National Renewable Energy Laboratory said today renewable energy and energy efficiency technologies in solving environmental problems is clear, Truly said

NASA TEERM Principal Center Non-Chrome Projects

NASA Technical Reports Server (NTRS)

Rothgeb, Matthew

2008-01-01

Technology Evaluation for Environmental Risk Mitigation (TEERM) Principal Center Mission is to identify and validate environmental technologies through joint activities that enhance mission readiness and reduce risk while minimizing duplication and associated costs.

Multiplex-Ready Technology for mid-throughput genotyping of molecular markers.

PubMed

Bonneau, Julien; Hayden, Matthew

2014-01-01

Screening molecular markers across large populations in breeding programs is generally time consuming and expensive. The Multiplex-Ready Technology (MRT) (Hayden et al., BMC genomics 9:80, 2008) was created to optimize polymorphism screening and genotyping using standardized PCR reaction conditions. The flexibility of this method maximizes the number of markers (up to 24 markers SSR or SNP, ideally small PCR product <500 bp and highly polymorphic) by using fluorescent dye (VIC, FAM, NED, and PET) and a semiautomated DNA fragment analyzer (ABI3730) capillary electrophoresis for large numbers of DNA samples (96 or 384 samples).

Technology readiness assessment of advanced space engine integrated controls and health monitoring

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1991-01-01

An evaluation is given for an integrated control and health monitoring system (ICHM) system that is designed to be used with hydrogen-oxygen rocket engines. The minimum required ICHM functions, system elements, technology readiness, and system cost are assessed for a system which permits the operation of H-O engines that are space-based, reusable, and descent throttleable. Based on the evaluation of the H-O ICHM, it is estimated that the minimum system requirements for demonstration on an engine system testbed will require an investment of 30 to 45 million dollars over six years.

Development of a COTS Mass Storage Unit for the Space Readiness Coherent Lidar Experiment

NASA Technical Reports Server (NTRS)

Liggin, Karl; Clark, Porter

1999-01-01

The technology to develop a Mass Storage Unit (MSU) using commercial-off-the-shelf (COTS) hard drives is an on-going challenge to meet the Space Readiness Coherent Lidar Experiment (SPARCLE) program requirements. A conceptual view of SPARCLE's laser collecting atmospheric data from the shuttle is shown in Figure 1. The determination to develop this technology required several in depth studies before an actual COTS hard drive was selected to continue this effort. Continuing the development of the MSU can, and will, serve future NASA programs that require larger data storage and more on-board processing.

Maturing Technologies for Stirling Space Power Generation

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Nowlin, Brentley C.; Dobbs, Michael W.; Schmitz, Paul C.; Huth, James

2016-01-01

Stirling Radioisotope Power Systems (RPS) are being developed as an option to provide power on future space science missions where robotic spacecraft will orbit, flyby, land or rove. A Stirling Radioisotope Generator (SRG) could offer space missions a more efficient power system that uses one fourth of the nuclear fuel and decreases the thermal footprint of the current state of the art. The RPS Program Office, working in collaboration with the U.S. Department of Energy (DOE), manages projects to develop thermoelectric and dynamic power systems, including Stirling Radioisotope Generators (SRGs). The Stirling Cycle Technology Development (SCTD) Project, located at Glenn Research Center (GRC), is developing Stirling-based subsystems, including convertors and controllers. The SCTD Project also performs research that focuses on a wide variety of objectives, including increasing convertor temperature capability to enable new environments, improving system reliability or fault tolerance, reducing mass or size, and developing advanced concepts that are mission enabling. Research activity includes maturing subsystems, assemblies, and components to prepare them for infusion into future convertor and generator designs. The status of several technology development efforts are described here. As part of the maturation process, technologies are assessed for readiness in higher-level subsystems. To assess the readiness level of the Dual Convertor Controller (DCC), a Technology Readiness Assessment (TRA) was performed and the process and results are shown. Stirling technology research is being performed by the SCTD Project for NASA's RPS Program Office, where tasks focus on maturation of Stirling-based systems and subsystems for future space science missions.

Prediction of School Readiness from Kindergarten Temperament Scores.

ERIC Educational Resources Information Center

Schoen, Michael J.; Nagle, Richard J.

1994-01-01

Investigated relationship between temperament and school readiness scores among 152 kindergarten children. All correlations between Temperament Assessment Battery for Children (TABC) scales and Metropolitan Readiness Test (MRT) scores were significant when effects of receptive vocabulary were removed. Results showed that, once TABC persistence…

Aerocapture Technology Development Overview

NASA Technical Reports Server (NTRS)

Munk, Michelle M.; Moon, Steven A.

2008-01-01

This paper will explain the investment strategy, the role of detailed systems analysis, and the hardware and modeling developments that have resulted from the past 5 years of work under NASA's In-Space Propulsion Program (ISPT) Aerocapture investment area. The organizations that have been funded by ISPT over that time period received awards from a 2002 NASA Research Announcement. They are: Lockheed Martin Space Systems, Applied Research Associates, Inc., Ball Aerospace, NASA s Ames Research Center, and NASA s Langley Research Center. Their accomplishments include improved understanding of entry aerothermal environments, particularly at Titan, demonstration of aerocapture guidance algorithm robustness at multiple bodies, manufacture and test of a 2-meter Carbon-Carbon "hot structure," development and test of evolutionary, high-temperature structural systems with efficient ablative materials, and development of aerothermal sensors that will fly on the Mars Science Laboratory in 2009. Due in large part to this sustained ISPT support for Aerocapture, the technology is ready to be validated in flight.

Overview of ERA Integrated Technology Demonstration (ITD) 51A Ultra-High Bypass (UHB) Integration for Hybrid Wing Body (HWB)

NASA Technical Reports Server (NTRS)

Flamm, Jeffrey D.; James, Kevin D.; Bonet, John T.

2016-01-01

The NASA Environmentally Responsible Aircraft Project (ERA) was a ve year project broken into two phases. In phase II, high N+2 Technical Readiness Level demonstrations were grouped into Integrated Technology Demonstrations (ITD). This paper describes the work done on ITD-51A: the Vehicle Systems Integration, Engine Airframe Integration Demonstration. Refinement of a Hybrid Wing Body (HWB) aircraft from the possible candidates developed in ERA Phase I was continued. Scaled powered, and unpowered wind- tunnel testing, with and without acoustics, in the NASA LARC 14- by 22-foot Subsonic Tunnel, the NASA ARC Unitary Plan Wind Tunnel, and the 40- by 80-foot test section of the National Full-Scale Aerodynamics Complex (NFAC) in conjunction with very closely coupled Computational Fluid Dynamics was used to demonstrate the fuel burn and acoustic milestone targets of the ERA Project.

Using the IRAS data to search in the asteroid belt for any potential evidence of galactic colonization

NASA Technical Reports Server (NTRS)

Papagiannis, M. D.

1986-01-01

The end product of the biological evolution seems to be the appearance of technological civilizations, which are characterized by superior technology that supercedes biological capabilities. The Search for Extraterrestrial Intelligence (SETI) has gained scientific recognition in recent years. The concept of galactic colonization is debated extensively, with opinions ranging from the impossible to the inevitable, but without a clear resolution. Answers can be obtained only with experimental tests and not with endless debates. A search for large space colonies in the asteroid belt, an ideal source of raw materials for a spaceborne civilization, is a test of the galactic colonization theory. The catalogue of solar system objects obtained form the Infrared Astronomy Satellite (IRAS) observations at 12, 25, 60, and 100 microns, is an ideal source for such a search. The catalog is expected to be ready at the end of 1985 and will contain more than 10,000 objects.

Lightweight thermally efficient composite feedlines for the space tug cryogenic propulsion system

NASA Technical Reports Server (NTRS)

Spond, D. E.

1975-01-01

Six liquid hydrogen feedline design concepts were developed for the cryogenic space tug. The feedlines include composite and all-metal vacuum jacketed and nonvacuum jacketed concepts, and incorporate the latest technological developments in the areas of thermally efficient vacuum jacket end closures and standoffs, radiation shields in the vacuum annulus, thermal coatings, and lightweight dissimilar metal flanged joints. The feedline design concepts are evaluated on the basis of thermal performance, weight, cost, reliability, and reusability. Design concepts were proved in a subscale test program. Detail design was completed on the most promising composite feedline concept and an all-metal feedline. Three full scale curved composite feedlines and one all-metal feedline assembly were fabricated and subjected to a test program representative of flight hardware qualification. The test results show that composite feedline technology is fully developed. Composite feedlines are ready for space vehicle application and offer significant reduction in weights over the conventional all-metal feedlines presently used.

Learners' Access to Tools and Experience with Technology at the University of the South Pacific: Readiness for E-Learning

ERIC Educational Resources Information Center

Raturi, Shikha; Hogan, Robert; Thaman, Konai Helu

2011-01-01

Technology in higher education has become exceedingly popular and useful; however, a digital divide generally applies to the use of technology in education in many developing countries. The Pacific Island countries differ in their technological capacities and infrastructure, with the Fijian capital Suva being most technologically and…

Technology Acquisition Reform

DTIC Science & Technology

2004-03-01

technologies until they are ready to be handed over to an established program. This office would also provide a home for disruptive technologies emerging...the development and acquisition of disruptive technologies .3 Disruptive technologies threaten programs of record but are essential to future Naval...and rarely emerge in response to customer demand. Disruptive technologies have features that a few fringe (and generally new) customers value

Vacuum Deployment and Testing of a 4-Quadrant Scalable Inflatable Solar Sail System

NASA Technical Reports Server (NTRS)

Lichodziejewski, David; Derbes, Billy; Galena, Daisy; Friese, Dave

2005-01-01

Solar sails reflect photons streaming from the sun and transfer momentum to the sail. The thrust, though small, is continuous and acts for the life of the mission without the need for propellant. Recent advances in materials and ultra-low mass gossamer structures have enabled a host of useful missions utilizing solar sail propulsion. The team of L'Garde, Jet Propulsion Laboratories, Ball Aerospace, and Langley Research Center, under the direction of the NASA In-Space Propulsion office, has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. The baseline design currently in development and testing was optimized around the 1 AU solar sentinel mission. Featuring inflatably deployed sub-T(sub g), rigidized beam components, the 10,000 sq m sail and support structure weighs only 47.5 kg, including margin, yielding an areal density of 4.8 g/sq m. Striped sail architecture, net/membrane sail design, and L'Garde's conical boom deployment technique allows scalability without high mass penalties. This same structural concept can be scaled to meet and exceed the requirements of a number of other useful NASA missions. This paper discusses the interim accomplishments of phase 3 of a 3-phase NASA program to advance the technology readiness level (TRL) of the solar sail system from 3 toward a technology readiness level of 6 in 2005. Under earlier phases of the program many test articles have been fabricated and tested successfully. Most notably an unprecedented 4-quadrant 10 m solar sail ground test article was fabricated, subjected to launch environment tests, and was successfully deployed under simulated space conditions at NASA Plum Brook s 30m vacuum facility. Phase 2 of the program has seen much development and testing of this design validating assumptions, mass estimates, and predicted mission scalability. Under Phase 3 a much larger 20 m square test article including subscale vane has been fabricated and tested. A 20 m system ambient deployment has been successfully conducted after enduring Delta-2 launch environment testing. The program will culminate in a vacuum deployment of a 20 m subscale test article at the NASA Glenn s Plum Brook 30 m vacuum test facility to bring the TRL level as close to 6 as possible in 1 g. This focused program will pave the way for a flight experiment of this highly efficient space propulsion technology.

TRL Assessment of Solar Sail Technology Development Following the 20-Meter System Ground Demonstrator Hardware Testing

NASA Technical Reports Server (NTRS)

Young, Roy M.; Montgomery, Edward E.; Montgomery, Sandy; Adams, Charles L.

2007-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office has been sponsoring 2 separate, independent system design and development hardware demonstration activities during 2002-2005. ATK Space Systems of Goleta, CA was the prime contractor for one development team and L'Garde, Inc. of Tustin, CA was the prime contractor for the other development team. The goal of these activities was to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by the year 2006. Component and subsystem fabrication and testing were completed successfully, including the ground deployment of 10-meter and 20-meter ground demonstration hardware systems under vacuum conditions. The deployment and structural testing of the 20-meter solar sail systems was conducted in the 30 meter diameter Space Power Facility thermal-vacuum chamber at NASA Glenn Plum Brook in April though August, 2005. This paper will present the results of the TRL assessment following the solar sail technology development activities associated with the design, development, analysis and testing of the 20-meter system ground demonstrators. Descriptions of the system designs for both the ATK and L'Garde systems will be presented. Changes, additions and evolution of the system designs will be highlighted. A description of the modeling and analyses activities performed by both teams, as well as testing conducted to raise the TRL of solar sail technology will be presented. A summary of the results of model correlation activities will be presented. Finally, technology gaps identified during the assessment and gap closure plans will be presented, along with "lessons learned", subsequent planning activities and validation flight opportunities for solar sail propulsion technology.

[Component and System Level of the FASTRAC Engine

NASA Technical Reports Server (NTRS)

1999-01-01

The primary activities of Lee & Associates during the period 7/20/99 to 12/31/99 as specified in the referenced Purchase Order has been in direct support of the Advanced Space Technology Program OfFice's Core Propulsion Project. An independent review to assess the program readiness to conduct component and system level testing of the FASTRAC Engine and to proceed into Fabrication has been provided. This was accomplished through the identification of program weaknesses and potential failure areas and where applicable recommended solutions were suggested to the Program Office that would mitigate technical and program risk. The approach taken to satisfy the objectives has been for the contractor to provide a team of experts with relevant experience from past programs and a strong background of experience in the fields critical to the success of the program. The team participated in Test Planning, Test Readiness Reviews for system testing at Stennis Space Center, Anomaly Resolution Reviews, an Operations Audit, and data analysis. This approach worked well in satisfying the objectives and providing the Project Office with valuable information in real time and through monthly reports. During the month of December 1999 the primary effort involved the participation in anomaly resolution and the detailed review of the data from the final H3 and H4 test series performed on the FASTRAC engine in the b-2 Horizontal Test Facility at Stennis. The more significant findings and recommendations from this review are presented in this report.

Exploring readiness for the adoption of new molecular water quality tests: Insights from interviews with policy makers, laboratory managers and watershed managers.

PubMed

Henrich, Natalie; Holmes, Bev; Isaac-Renton, Judith; Prystajecky, Natalie

2016-01-01

Adoption of molecular-based water quality tests has been limited despite their advantage over traditional culture-based tests. A better understanding of the factors affecting adoption of these tests is needed for effective implementation. The Consolidated Framework for Implementation Research (CFIR) was used to analyze interviews with policy makers, watershed managers and laboratory managers in British Columbia (BC), Canada about their perceptions of molecular water tests currently under development in order to assess readiness for adoption and identify factors that may impact implementation. Many of the CFIR constructs were addressed by study participants, thus confirming their validity in the water-testing context. Other constructs were not mentioned, which suggests that awareness about these constructs need to be increased to ensure that they are incorporated into implementation strategies. In general, there was much enthusiasm for the new tests, which were seen to provide valuable information that could enable improved management of watersheds and treatment of source water. However, prior to adopting the tests, stakeholders would require evidence supporting the tests' validity and reliability, would need to assess the complexity of introducing the tests into laboratories and water sampling processes, and would require support interpreting the test results. Even if all the aforementioned issues are satisfactorily addressed, the tests may not be adopted unless regulations and policies were changed to allow the use of these test results to inform decision making. The results support that implementation of new technologies, such as these water quality tests, need to address potential barriers that could hinder uptake despite the advantages of the new product. Copyright © 2015 Elsevier Ltd. All rights reserved.

Are They Ready to Teach with Technology? An Investigation of Technology Instruction in Music Teacher Education Programs

ERIC Educational Resources Information Center

Haning, Marshall

2016-01-01

The purpose of this research was to investigate the type, quantity, and effects of technology instruction currently being provided to undergraduate music education majors. Undergraduate participants (n = 46) at 10 degree-granting institutions completed an online survey on the technology instruction received during their undergraduate degree…

Lunar Surface Systems Supportability Technology Development Roadmap

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony;

Aerocapture, Entry, Descent and Landing (AEDL) Human Planetary Landing Systems. Section 10: AEDL Analysis, Test and Validation Infrastructure

NASA Technical Reports Server (NTRS)

Arnold, J.; Cheatwood, N.; Powell, D.; Wolf, A.; Guensey, C.; Rivellini, T.; Venkatapathy, E.; Beard, T.; Beutter, B.; Laub, B.

2005-01-01

Contents include the following: 3 Listing of critical capabilities (knowledge, procedures, training, facilities) and metrics for validating that they are mission ready. Examples of critical capabilities and validation metrics: ground test and simulations. Flight testing to prove capabilities are mission ready. Issues and recommendations.

In-Space Propulsion Technology Products Ready for Infusion on NASA's Future Science Missions

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil, Eric; Peterson, Todd; Dankanich, John; Munk, Michele M.

2012-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies that will enable or enhance NASA robotic science missions. These in-space propulsion technologies are applicable, and potentially enabling, for future NASA flagship and sample return missions currently being considered. They have a broad applicability to future competed mission solicitations. The high-temperature Advanced Material Bipropellant Rocket (AMBR) engine, providing higher performance for lower cost, was completed in 2009. Two other ISPT technologies are nearing completion of their technology development phase: 1) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 2) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; aerothermal effect models; and atmospheric models for Earth, Titan, Mars and Venus. This paper provides status of the technology development, applicability, and availability of in-space propulsion technologies that have recently completed their technology development and will be ready for infusion into NASA s Discovery, New Frontiers, SMD Flagship, or technology demonstration missions.

Solar Electric Propulsion

NASA Technical Reports Server (NTRS)

LaPointe, Michael

2006-01-01

The Solar Electric Propulsion (SEP) technology area is tasked to develop near and mid-term SEP technology to improve or enable science mission capture while minimizing risk and cost to the end user. The solar electric propulsion investments are primarily driven by SMD cost-capped mission needs. The technology needs are determined partially through systems analysis tasks including the recent "Re-focus Studies" and "Standard Architecture Study." These systems analysis tasks transitioned the technology development to address the near term propulsion needs suitable for cost-capped open solicited missions such as Discovery and New Frontiers Class missions. Major SEP activities include NASA's Evolutionary Xenon Thruster (NEXT), implementing a Standard Architecture for NSTAR and NEXT EP systems, and developing a long life High Voltage Hall Accelerator (HiVHAC). Lower level investments include advanced feed system development and xenon recovery testing. Future plans include completion of ongoing ISP development activities and evaluating potential use of commercial electric propulsion systems for SMD applications. Examples of enhanced mission capability and technology readiness dates shall be discussed.

Recent Progress in Engine Noise Reduction Technologies

NASA Technical Reports Server (NTRS)

Huff, Dennis; Gliebe, Philip

2003-01-01

Highlights from NASA-funded research over the past ten years for aircraft engine noise reduction are presented showing overall technical plans, accomplishments, and selected applications to turbofan engines. The work was sponsored by NASA's Advanced Subsonic Technology (AST) Noise Reduction Program. Emphasis is given to only the engine noise reduction research and significant accomplishments that were investigated at Technology Readiness Levels ranging from 4 to 6. The Engine Noise Reduction sub-element was divided into four work areas: source noise prediction, model scale tests, engine validation, and active noise control. Highlights from each area include technologies for higher bypass ratio turbofans, scarf inlets, forward-swept fans, swept and leaned stators, chevron/tabbed nozzles, advanced noise prediction analyses, and active noise control for fans. Finally, an industry perspective is given from General Electric Aircraft Engines showing how these technologies are being applied to commercial products. This publication contains only presentation vu-graphs from an invited lecture given at the 41st AIAA Aerospace Sciences Meeting, January 6-9, 2003.

U.S. Army Medical Department

MedlinePlus

... Games, they came ready to play. Read more Image-2 Excerpt-2 Training, technological synergy key to future battlefield care scenarios To obtain a more complete, more mature fusion of technology and Soldier, Army Medicine focuses on ...

Measuring E-Learning Readiness among EFL Teachers in Intermediate Public Schools in Saudi Arabia

ERIC Educational Resources Information Center

Al-Furaydi, Ahmed Ajab

2013-01-01

This study will determine their readiness level for the e-learning in several aspects such as attitude toward e-learning, and computer literacy also this study attempt to investigate the main the barriers that EFL teachers have to overcome while incorporating e-learning into their teaching. The theory upon which the study was technology acceptance…

Menu of College Readiness Indicators and Supports. College Readiness Indicator Systems (CRIS) Resource Series

ERIC Educational Resources Information Center

John W. Gardner Center for Youth and Their Communities, 2014

2014-01-01

School communities across the country are working hard to comply with state and federal policies requiring that all students be prepared for success in college. Technological advances and new reporting requirements make data on students and schools more accessible than ever--but more and better data alone are not enough to meet the challenges…

Focus on Mentee-Mentor Relationships: The 10th Grade Implementation of iMentor's College Ready Program. Report

ERIC Educational Resources Information Center

Merrill, Lisa; Kang, David; Siman, Nina; Soltani, Jasmine

2016-01-01

The iMentor College Ready Program combines school-based mentoring with technology and aspects of whole school reform. The program strives to create strong relationships between low-income youth and college-educated mentors--relationships that it hopes to leverage to help students develop the mindsets, skills, and knowledge necessary to enroll and…

Focus on Mentee-Mentor Relationships: The 10th Grade Implementation of iMentor's College Ready Program. Executive Summary

ERIC Educational Resources Information Center

Merrill, Lisa; Kang, David; Siman, Nina; Soltani, Jasmine

2016-01-01

The iMentor College Ready Program is a model that combines school-based mentoring with technology and aspects of whole school reform. The program aims to create strong relationships between low-income youth and college-educated mentors--and to leverage these relationships to help students develop the mindsets, skills, and knowledge necessary to…

A Lightweight, Precision-Deployable, Optical Bench for High Energy Astrophysics Missions

NASA Astrophysics Data System (ADS)

Danner, Rolf; Dailey, D.; Lillie, C.

2011-09-01

The small angle of total reflection for X-rays, forcing grazing incidence optics with large collecting areas to long focal lengths, has been a fundamental barrier to the advancement of high-energy astrophysics. Design teams around the world have long recognized that a significant increase in effective area beyond Chandra and XMM-Newton requires either a deployable optical bench or separate X-ray optics and instrument module on formation flying spacecraft. Here, we show that we have in hand the components for a lightweight, precision-deployable optical bench that, through its inherent design features, is the affordable path to the next generation of imaging high-energy astrophysics missions. We present our plans for a full-scale engineering model of a deployable optical bench for Explorer-class missions. We intend to use this test article to raise the technology readiness level (TRL) of the tensegrity truss for a lightweight, precision-deployable optical bench for high-energy astrophysics missions from TRL 3 to TRL 5 through a set of four well-defined technology milestones. The milestones cover the architecture's ability to deploy and control the focal point, characterize the deployed dynamics, determine long-term stability, and verify the stowed load capability. Our plan is based on detailed design and analysis work and the construction of a first prototype by our team. Building on our prior analysis and the high TRL of the architecture components we are ready to move on to the next step. The key elements to do this affordably are two existing, fully characterized, flight-quality, deployable booms. After integrating them into the test article, we will demonstrate that our architecture meets the deployment accuracy, adjustability, and stability requirements. The same test article can be used to further raise the TRL in the future.

Use of the Nanofitin Alternative Scaffold as a GFP-Ready Fusion Tag

PubMed Central

Huet, Simon; Gorre, Harmony; Perrocheau, Anaëlle; Picot, Justine; Cinier, Mathieu

2015-01-01

With the continuous diversification of recombinant DNA technologies, the possibilities for new tailor-made protein engineering have extended on an on-going basis. Among these strategies, the use of the green fluorescent protein (GFP) as a fusion domain has been widely adopted for cellular imaging and protein localization. Following the lead of the direct head-to-tail fusion of GFP, we proposed to provide additional features to recombinant proteins by genetic fusion of artificially derived binders. Thus, we reported a GFP-ready fusion tag consisting of a small and robust fusion-friendly anti-GFP Nanofitin binding domain as a proof-of-concept. While limiting steric effects on the carrier, the GFP-ready tag allows the capture of GFP or its blue (BFP), cyan (CFP) and yellow (YFP) alternatives. Here, we described the generation of the GFP-ready tag from the selection of a Nanofitin variant binding to the GFP and its spectral variants with a nanomolar affinity, while displaying a remarkable folding stability, as demonstrated by its full resistance upon thermal sterilization process or the full chemical synthesis of Nanofitins. To illustrate the potential of the Nanofitin-based tag as a fusion partner, we compared the expression level in Escherichia coli and activity profile of recombinant human tumor necrosis factor alpha (TNFα) constructs, fused to a SUMO or GFP-ready tag. Very similar expression levels were found with the two fusion technologies. Both domains of the GFP-ready tagged TNFα were proved fully active in ELISA and interferometry binding assays, allowing the simultaneous capture by an anti-TNFα antibody and binding to the GFP, and its spectral mutants. The GFP-ready tag was also shown inert in a L929 cell based assay, demonstrating the potent TNFα mediated apoptosis induction by the GFP-ready tagged TNFα. Eventually, we proposed the GFP-ready tag as a versatile capture and labeling system in addition to expected applications of anti-GFP Nanofitins (as illustrated with previously described state-of-the-art anti-GFP binders applied to living cells and in vitro applications). Through a single fusion domain, the GFP-ready tagged proteins benefit from subsequent customization within a wide range of fluorescence spectra upon indirect binding of a chosen GFP variant. PMID:26539718

Use of the Nanofitin Alternative Scaffold as a GFP-Ready Fusion Tag.

PubMed

Huet, Simon; Gorre, Harmony; Perrocheau, Anaëlle; Picot, Justine; Cinier, Mathieu

2015-01-01

With the continuous diversification of recombinant DNA technologies, the possibilities for new tailor-made protein engineering have extended on an on-going basis. Among these strategies, the use of the green fluorescent protein (GFP) as a fusion domain has been widely adopted for cellular imaging and protein localization. Following the lead of the direct head-to-tail fusion of GFP, we proposed to provide additional features to recombinant proteins by genetic fusion of artificially derived binders. Thus, we reported a GFP-ready fusion tag consisting of a small and robust fusion-friendly anti-GFP Nanofitin binding domain as a proof-of-concept. While limiting steric effects on the carrier, the GFP-ready tag allows the capture of GFP or its blue (BFP), cyan (CFP) and yellow (YFP) alternatives. Here, we described the generation of the GFP-ready tag from the selection of a Nanofitin variant binding to the GFP and its spectral variants with a nanomolar affinity, while displaying a remarkable folding stability, as demonstrated by its full resistance upon thermal sterilization process or the full chemical synthesis of Nanofitins. To illustrate the potential of the Nanofitin-based tag as a fusion partner, we compared the expression level in Escherichia coli and activity profile of recombinant human tumor necrosis factor alpha (TNFα) constructs, fused to a SUMO or GFP-ready tag. Very similar expression levels were found with the two fusion technologies. Both domains of the GFP-ready tagged TNFα were proved fully active in ELISA and interferometry binding assays, allowing the simultaneous capture by an anti-TNFα antibody and binding to the GFP, and its spectral mutants. The GFP-ready tag was also shown inert in a L929 cell based assay, demonstrating the potent TNFα mediated apoptosis induction by the GFP-ready tagged TNFα. Eventually, we proposed the GFP-ready tag as a versatile capture and labeling system in addition to expected applications of anti-GFP Nanofitins (as illustrated with previously described state-of-the-art anti-GFP binders applied to living cells and in vitro applications). Through a single fusion domain, the GFP-ready tagged proteins benefit from subsequent customization within a wide range of fluorescence spectra upon indirect binding of a chosen GFP variant.

ENVIRONMENTAL TECHNOLOGY VERIFICATION: A VEHICLE FOR INDEPENDENT, CREDIBLE PERFORMANCE RESULTS ON COMMERCIALLY READY TECHNOLOGIES

EPA Science Inventory

The paper discusses the U. S. Environmental Protection Agency's Environmental Technology Verification (ETV) Program: its history, operations, past successes, and future plans. Begun in 1995 in response to President Clinton's "Bridge to a Sustainable Future" as a means to work wit...

Teachers' Perceptions of Kindergarten Readiness Indicators

ERIC Educational Resources Information Center

Boylan, Tronya E.

2017-01-01

The study of school readiness is multifaceted, encompassing an understanding of many developmental areas and skills. In the current educational culture of high-stakes testing, increased rigor, and high learning expectations, parents may be concerned about a child's readiness to begin kindergarten. With increased accountability, teachers may also…

Aerocapture Technology Development for Planetary Science - Update

NASA Technical Reports Server (NTRS)

Munk, Michelle M.

2006-01-01

Within NASA's Science Mission Directorate is a technological program dedicated to improving the cost, mass, and trip time of future scientific missions throughout the Solar System. The In-Space Propulsion Technology (ISPT) Program, established in 2001, is charged with advancing propulsion systems used in space from Technology Readiness Level (TRL) 3 to TRL6, and with planning activities leading to flight readiness. The program's content has changed considerably since inception, as the program has refocused its priorities. One of the technologies that has remained in the ISPT portfolio through these changes is Aerocapture. Aerocapture is the use of a planetary body's atmosphere to slow a vehicle from hyperbolic velocity to a low-energy orbit suitable for science. Prospective use of this technology has repeatedly shown huge mass savings for missions of interest in planetary exploration, at Titan, Neptune, Venus, and Mars. With launch vehicle costs rising, these savings could be the key to mission viability. This paper provides an update on the current state of the Aerocapture technology development effort, summarizes some recent key findings, and highlights hardware developments that are ready for application to Aerocapture vehicles and entry probes alike. Description of Investments: The Aerocapture technology area within the ISPT program has utilized the expertise around NASA to perform Phase A-level studies of future missions, to identify technology gaps that need to be filled to achieve flight readiness. A 2002 study of the Titan Explorer mission concept showed that the combination of Aerocapture and a Solar Electric Propulsion system could deliver a lander and orbiter to Titan in half the time and on a smaller, less expensive launch vehicle, compared to a mission using chemical propulsion for the interplanetary injection and orbit insertion. The study also identified no component technology breakthroughs necessary to implement Aerocapture on such a mission. Similar studies of Aerocapture applications at Neptune, Venus, and Mars were studied in 2003 through 2005. All showed significant performance improvements for the missions studied. Findings from these studies were used to guide the technology development tasks originally solicited in a 2002 NASA ROSS Research Announcement. The tasks are now in their final year and have provided numerous improvements in modeling and hardware, for use in proposals or new mission starts. Major Accomplishments: Since validation of the Aerocapture maneuver requires a space flight, ground developments have focused on modeling and environment prediction, materials, and sensors. Lockheed Martin has designed and built a 2-meter Carbon-Carbon aeroshell "hot structure." The article utilizes co-cured stiffening ribs and advanced insulation to achieve large scale, and up to a 40% reduction in areal density over the Genesis probe construction. This concept would be an efficient solution for probes that experience heat rates near 800-1000 W/cm(exp 2), such as at Venus and Earth. Applied Research Associates has extensively tested a family of efficient ablative TPS materials that provide solutions for a range of heating conditions. These materials are being applied to high-temperature structures built by ATK Space Systems, led by Langley Research Center. One-meter aeroshells will be thermally tested to validate construction and demonstrate higher bondline temperatures, which can lead to mass savings of up to 30% over traditional heatshields. Ames Research Center has developed aeroshell instrumentation that could measure environmental conditions and material performance during atmospheric entry. Instruments to measure TPS recession, heat flux, and catalycity could be combined with traditional sensors to provide a "plug-and-play" system for minimal mass and power, that would acquire flight data for model improvement and risk reduction on future missions. Improved atmospheric and aerothermodynamic models ha also been a major focus of the program. Next Steps: Aerocapture is one of five technologies in competition for a flight validation opportunity through the New Millennium Program. If selected, a fully autonomous vehicle will perform an Aerocapture at Earth in 2010, and flight data will be used to validate the guidance system and the TPS material for science mission infusion.

Multi-Evaporator Miniature Loop Heat Pipe for Small Spacecraft Thermal Control. Part 2; Validation Results

NASA Technical Reports Server (NTRS)

Ku, Jentung; Ottenstein, Laura; Douglas, Donya; Hoang, Triem

2010-01-01

Under NASA s New Millennium Program Space Technology 8 (ST 8) Project, Goddard Space Fight Center has conducted a Thermal Loop experiment to advance the maturity of the Thermal Loop technology from proof of concept to prototype demonstration in a relevant environment , i.e. from a technology readiness level (TRL) of 3 to a level of 6. The thermal Loop is an advanced thermal control system consisting of a miniature loop heat pipe (MLHP) with multiple evaporators and multiple condensers designed for future small system applications requiring low mass, low power, and compactness. The MLHP retains all features of state-of-the-art loop heat pipes (LHPs) and offers additional advantages to enhance the functionality, performance, versatility, and reliability of the system. An MLHP breadboard was built and tested in the laboratory and thermal vacuum environments for the TRL 4 and TRL 5 validations, respectively, and an MLHP proto-flight unit was built and tested in a thermal vacuum chamber for the TRL 6 validation. In addition, an analytical model was developed to simulate the steady state and transient behaviors of the MLHP during various validation tests. The MLHP demonstrated excellent performance during experimental tests and the analytical model predictions agreed very well with experimental data. All success criteria at various TRLs were met. Hence, the Thermal Loop technology has reached a TRL of 6. This paper presents the validation results, both experimental and analytical, of such a technology development effort.

Enabling Technologies for Characterizing Exoplanet Systems with Exo-C

NASA Astrophysics Data System (ADS)

Cahoy, Kerri Lynn; Belikov, Ruslan; Stapelfeldt, Karl R.; Chakrabarti, Supriya; Trauger, John T.; Serabyn, Eugene; McElwain, Michael W.; Pong, Christopher M.; Brugarolas, Paul

2015-01-01

The Exoplanet Science and Technology Definition Team's Internal Coronagraph mission design, called 'Exo-C', utilizes several technologies that have advanced over the past decade with support from the Exoplanet Exploration Program. Following the flow of photons through the telescope, the science measurement is enabled by (i) a precision pointing system to keep the target exoplanet system precisely positioned on the detector during the integration time, (ii) high-performance coronagraphs to block the parent star's light so that the planet's reflected light can be detected, (iii) a wavefront control system to compensate for any wavefront errors such as those due to thermal or mechanical deformations in the optical path, especially errors with high spatial frequencies that could cause contrast-reducing speckles, and (iv) an integral field spectrograph (IFS) that provides moderate resolution spectra of the target exoplanets, permitting their characterization and comparison with models and other data sets. Technologies such as the wavefront control system and coronagraphs will also benefit from other funded efforts in progress, such as the Wide Field Infrared Survey Telescope Astrophysics Focused Telescope Assets (WFIRST-AFTA) program. Similarly, the Exo-C IFS will benefit from the Prototype Imaging Spectrograph for Coronagraphic Exoplanet Studies (PISCES) demonstration. We present specific examples for each of these technologies showing that the state of the art has advanced to levels that will meet the overall scientific, cost, and schedule requirements of the Exo-C mission. These capabilities have matured with testbed and/or ground-telescope demonstrations and have reached a technological readiness level (TRL) that supports their inclusion in the baseline design for potential flight at the end of this decade. While additional work remains to build and test flight-like components (that concurrently meet science as well as size, weight, power, and environmental requirements) and to integrate these subsystems together for a hardware-in-the-loop end-to-end demonstration, the overall readiness of the suite of enabling technologies makes a compelling case for Exo-C among the exoplanet direct imaging mission candidates.

A Comparison of Flow-Through Versus Non-Flow-Through Proton Exchange Membrane Fuel Cell Systems for NASA's Exploration Missions

NASA Technical Reports Server (NTRS)

Hoberecht, Mark A.

2010-01-01

As part of the Exploration Technology Development Program (ETDP) under the auspices of the Exploration Systems Mission Directorate (ESMD), NASA is developing both primary fuel cell power systems and regenerative fuel cell (RFC) energy storage systems within the fuel cell portion of the Energy Storage Project. This effort is being led by the NASA Glenn Research Center (GRC) in partnership with the NASA Johnson Space Center (JSC), Jet Propulsion Laboratory (JPL), NASA Kennedy Space Center (KSC), and industrial partners. The development goals are to improve fuel cell and electrolysis stack electrical performance, reduce system mass, volume, and parasitic power requirements, and increase system life and reliability. A major focus of this effort has been the parallel development of both flow-through and non-flow-through proton exchange membrane (PEM) primary fuel cell power systems. The plan has been, at the appropriate time, to select a single primary fuel cell technology for eventual flight hardware development. Ideally, that appropriate time would occur after both technologies have achieved a technology readiness level (TRL) of six, which represents an engineering model fidelity PEM fuel cell system being successfully tested in a relevant environment. Budget constraints in fiscal year 2009 and beyond have prevented NASA from continuing to pursue the parallel development of both primary fuel cell options. Because very limited data exists for either system, a toplevel, qualitative assessment based on engineering judgement was performed expeditiously to provide guidance for a selection. At that time, the non-flow-through technology was selected for continued development because of potentially major advantages in terms of weight, volume, parasitic power, reliability, and life. This author believes that the advantages are significant enough, and the potential benefits great enough, to offset the higher state of technology readiness of flow-through technology. This paper summarizes the technical considerations which helped form the engineering judgement that led to the final decision.

STS-85 Payload Specialist Tryggvason at LC 39A during TCDT

NASA Technical Reports Server (NTRS)

1997-01-01

STS-85 Payload Specialist Bjarni V. Tryggvason stands ready for questions at a news briefing at Launch Pad 39A during a break in Terminal Countdown Demonstration Test (TCDT) activities for that mission. The primary payload aboard the Space Shuttle orbiter Discovery is the Cryogenic Infrared Spectrometers and Telescopes for the Atmosphere-2 (CRISTA-SPAS-2). Other payloads on the 11- day mission include the Manipulator Flight Demonstration (MFD), and Technology Applications and Science-1 (TAS-1) and International Extreme Ultraviolet Hitchhiker-2 (IEH-2) experiments.

The transfer of technology to measure skin burn depth in humans

NASA Technical Reports Server (NTRS)

Yost, William T.; Cantrell, John H.

1991-01-01

Discussed here is the use of ultrasonic techniques originally used to locate cracks in metal structues to measure burn wound depth in humans. Acoustic impedance, performance tests, and the theoretical model are discussed. Measurements of skin burns on anesthetized pigs made with the the ultrasonic instrumentation were in agreement with diagnoses made by a physician, and subsequently confirmed by the healing process. Researchers felt that the concept proved useful in a clinical setting and that the instrument and concept were ready to extend to the manufacturer.

TBI Assessment of Readiness Using a Gait Evaluation Test (TARGET): Development of a Portable mTBI Screening Device

DTIC Science & Technology

2017-05-01

AWARD NUMBER: W81XWH-15-1-0094 TITLE: TBI Assessment of Readiness Using a Gait Evaluation Test (TARGET): Development of a Portable mTBI Screening...Annual 3. DATES COVERED 1 May 2016 - 30 Apr 2017 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER “TBI Assessment of Readiness Using a Gait Evaluation ...service members sustaining some form of traumatic brain injury (TBI) over the past 14 years, the lack of an objective measurement tool for evaluation

Robotic follower experimentation results: ready for FCS increment I

NASA Astrophysics Data System (ADS)

Jaczkowski, Jeffrey J.

2003-09-01

Robotics is a fundamental enabling technology required to meet the U.S. Army's vision to be a strategically responsive force capable of domination across the entire spectrum of conflict. The U. S. Army Research, Development and Engineering Command (RDECOM) Tank Automotive Research, Development & Engineering Center (TARDEC), in partnership with the U.S. Army Research Laboratory, is developing a leader-follower capability for Future Combat Systems. The Robotic Follower Advanced Technology Demonstration (ATD) utilizes a manned leader to provide a highlevel proofing of the follower's path, which operates with minimal user intervention. This paper will give a programmatic overview and discuss both the technical approach and operational experimentation results obtained during testing conducted at Ft. Bliss, New Mexico in February-March 2003.

Enabling Electric Propulsion for Flight - Hybrid Electric Aircraft Research at AFRC

NASA Technical Reports Server (NTRS)

Clarke, Sean; Lin, Yohan; Kloesel, Kurt; Ginn, Starr

2014-01-01

Advances in electric machine efficiency and energy storage capability are enabling a new alternative to traditional propulsion systems for aircraft. This has already begun with several small concept and demonstration vehicles, and NASA projects this technology will be essential to meet energy and emissions goals for commercial aviation in the next 30 years. In order to raise the Technology Readiness Level of electric propulsion systems, practical integration and performance challenges will need to be identified and studied in the near-term so that larger, more advanced electric propulsion system testbeds can be designed and built. Researchers at NASA Armstrong Flight Research Center are building up a suite of test articles for the development, integration, and validation of these systems in a real world environment.

Wet countdown demonstration and flight readiness firing

NASA Technical Reports Server (NTRS)

1981-01-01

The prelaunch tests for the Space Transportation System 1 flight are briefly described. Testing is divided into two major sections: the wet countdown demonstration test/flight readiness firing, which includes a 20 second test firing of the orbiter's three main engines, and a mission verification test, which is centered on flight and landing operations. The functions of the countdown sequence are listed and end of mission and mission abort exercises are described.

Saturn Apollo Program

NASA Image and Video Library

1967-01-01

This photograph is a view of the Saturn V S-IC (first) test stage being hoisted into the S-IC-B1 test stand at the Mississippi Test Facility (MTF), Bay St. Louis, Mississippi. This stage was used to prove the operational readiness of the stand. Begirning operations in 1966, the MTF has two test stands; a dual-position structure for running the S-IC stage at full throttle, and two separate stands for the S-II (Saturn V third) stage. It became the focus of the static test firing program. The completed S-IC stage was shipped from the Michoud Assembly Facility (MAF) to the MTF. The stage was then installed into the 124-meter-high test stand for static firing tests before shipment to the Kennedy Space Center for final assembly of the Saturn V vehicle. The MTF was renamed to the National Space Technology Laboratory (NSTL) in 1974 and later to the Stennis Space Center (SSC) in May 1988.

Air STAR Beyond Visual Range UAS Description and Preliminary Test Results

NASA Technical Reports Server (NTRS)

Cunningham, Kevin; Cox, David E.; Foster, John V.; Riddick, Stephen E.; Laughter, Sean A.

2016-01-01

The NASA Airborne Subscale Transport Aircraft Research Unmanned Aerial System project's capabilities were expanded by updating the system design and concept of operations. The new remotely piloted airplane system design was flight tested to assess integrity and operational readiness of the design to perform flight research. The purpose of the system design is to improve aviation safety by providing a capability to validate, in high-risk conditions, technologies to prevent airplane loss of control. Two principal design requirements were to provide a high degree of reliability and that the new design provide a significant increase in test volume (relative to operations using the previous design). The motivation for increased test volume is to improve test efficiency and allow new test capabilities that were not possible with the previous design and concept of operations. Three successful test flights were conducted from runway 4-22 at NASA Goddard Space Flight Center's Wallops Flight Facility.

Identifying Potential Implications of Technologies on Military and Security Options

DTIC Science & Technology

2006-06-01

Technology Readiness Level (TRL) ratings. THE DISCUSSION Technology surprise occurs through the use of rapidly-emerging and disruptive technologies by...NATO RTB Systems Analysis and Studies Panel, Exploratory Team on the Impact of Disruptive Technologies The objectives of this task group (TG...Workshop on Emerging Disruptive Technologies and the Implications for Defence advanced the view that TTCP should examine the potential of emerging

Readiness to change as a moderator of outcome in transdiagnostic treatment

PubMed Central

BOSWELL, JAMES F.; SAUER, SHANNON E.; GALLAGHER, MATTHEW W.; DELGADO, NICOLE; BARLOW, DAVID H.

2012-01-01

Initial symptom severity is a client characteristic associated with psychotherapy outcome, although this relationship is not well-understood. Readiness to change is a factor that may influence this relationship. This study tested readiness as a moderator of the relationship between initial severity and symptom change. Data were derived from an RCT examining the efficacy of a transdiagnostic CBT treatment. Readiness was assessed with the URICA, and symptom and functioning outcomes were assessed. Multiple regression models indicated that severity was associated with less overall change, yet readiness moderated this relationship. At higher levels of readiness, the effect of initial severity on outcome was essentially reversed; for clients with higher initial readiness, higher levels of severity were associated with greater change. PMID:22607634

Rapid detection and differentiation of Staphylococcus colonies using an optical scattering technology.

PubMed

Alsulami, Tawfiq S; Zhu, Xingyue; Abdelhaseib, Maha Usama; Singh, Atul K; Bhunia, Arun K

2018-05-24

Staphylococcus species are a major pathogen responsible for nosocomial infections and foodborne illnesses. We applied a laser-based BARDOT (bacterial rapid detection using optical scattering technology) for rapid colony screening and detection of Staphylococcus on an agar plate and differentiate these from non-Staphylococcus spp. Among the six growth media tested, phenol red mannitol agar (PRMA) was found most suitable for building the Staphylococcus species scatter image libraries. Scatter image library for Staphylococcus species gave a high positive predictive value (PPV 87.5-100%) when tested against known laboratory strains of Staphylococcus spp., while the PPV against non-Staphylococcus spp. was 0-38%. A total of nine naturally contaminated bovine raw milk and ready-to-eat chicken salad samples were tested, and BARDOT detected Staphylococcus including Staphylococcus aureus with 80-100% PPV. Forty-five BARDOT-identified bacterial isolates from naturally contaminated foods were further confirmed by tuf and nuc gene-specific PCR and 16S rRNA gene sequence. This label-free, non-invasive on-plate colony screening technology can be adopted by the food industries, biotechnology companies, and public health laboratories for Staphylococcus species detection including S. aureus from various samples for food safety and public health management. Graphical abstract.

The Condition of STEM 2014. National

ERIC Educational Resources Information Center

ACT, Inc., 2014

2014-01-01

ACT has been a leader in measuring college and career readiness trends since 1959. Each August, they release "The Condition of College & Career Readiness" (www.act.org/newsroom/data/2014), their annual report on the progress of the ACT-tested graduating class relative to college readiness. Nationally, 57% of the 2014 graduating class…

Starshades for Exoplanet Imaging and Characterization

NASA Astrophysics Data System (ADS)

Kasdin, N. J.; Vanderbei, R. J.; Shaklan, S.; Lisman, D.; Thomson, M.; Cady, E.; Macintosh, B.; Sirbu, D.; Lo, A.

2014-01-01

An external occulter is a satellite employing a large screen, or starshade, that flies in formation with a spaceborne telescope to provide the starlight suppression needed for detecting and characterizing exoplanets. Among the advantages of using an occulter are the broadband allowed for characterization and the removal of light before entering the observatory, greatly relaxing the requirements on the telescope and instrument. In this presentation I will explain how star shades achieve high contrast through precise design and control of their shape and how we develop an error budget to establish requirements on the manufacturing and control. Raising the technology readiness level of starshades requires a sequence of activities to verify approaches to manufacturing, deployment, test, and analysis. The SAT-TDEM program has been instrumental in raising the readiness level of the most critical technology. In particular, I will show the results of our first TDEM in 2010-2012 that verified a full scale petal could be built and measured to the needed accuracy for 10 orders of magnitude of contrast. Our second TDEM in 2012-2014 verified that a starshade could be deployed and the petals could be placed to the required position to better than 1 mm. Finally, laboratory experiments have verified the optical modeling used to predict starshade performance to better than 1e-10.

Factor Analysis of the Metropolitan Readiness Test on First-Grade Children.

ERIC Educational Resources Information Center

Watkins, Ernest O.; Wiebe, Michael J.

1984-01-01

Investigated the factor composition of the Metropolitan Readiness Test, using first-grade subjects (N=1,241). A total battery score was supported, as well as a second factor believed to represent a language dimension of the test. None of the MRT's other content areas or a distinct prereading measure were identified. (Author/JAC)

Multi-Evaporator Miniature Loop Heat Pipe for Small Spacecraft Thermal Control. Part 1; New Technologies and Validation Approach

NASA Technical Reports Server (NTRS)

Ku, Jentung; Ottenstein, Laura; Douglas, Donya; Hoang, Triem

2010-01-01

Under NASA s New Millennium Program Space Technology 8 (ST 8) Project, four experiments Thermal Loop, Dependable Microprocessor, SAILMAST, and UltraFlex - were conducted to advance the maturity of individual technologies from proof of concept to prototype demonstration in a relevant environment , i.e. from a technology readiness level (TRL) of 3 to a level of 6. This paper presents the new technologies and validation approach of the Thermal Loop experiment. The Thermal Loop is an advanced thermal control system consisting of a miniature loop heat pipe (MLHP) with multiple evaporators and multiple condensers designed for future small system applications requiring low mass, low power, and compactness. The MLHP retains all features of state-of-the-art loop heat pipes (LHPs) and offers additional advantages to enhance the functionality, performance, versatility, and reliability of the system. Details of the thermal loop concept, technical advances, benefits, objectives, level 1 requirements, and performance characteristics are described. Also included in the paper are descriptions of the test articles and mathematical modeling used for the technology validation. An MLHP breadboard was built and tested in the laboratory and thermal vacuum environments for TRL 4 and TRL 5 validations, and an MLHP proto-flight unit was built and tested in a thermal vacuum chamber for the TRL 6 validation. In addition, an analytical model was developed to simulate the steady state and transient behaviors of the MLHP during various validation tests. Capabilities and limitations of the analytical model are also addressed.

Information Technology: Making It All Fit. Track II: Managing Technologies Integration.

ERIC Educational Resources Information Center

CAUSE, Boulder, CO.

Nine papers from the 1988 CAUSE conference's Track II, Managing Technologies Integration, are presented. They include: "Computing in the '90s--Will We Be Ready for the Applications Needed?" (Stephen Patrick); "Glasnost, The Era of 'Openness'" (Bernard W. Gleason); "Academic and Administrative Computing: Are They Really…

Vocational Education Readiness Test Manual.

ERIC Educational Resources Information Center

Thomas, Edward L.; And Others

This manual provides vocational instructors in public schools with standardized procedures in the form of a Vocational Education Readiness Test (VERT) for assessing the vocational potential of educable mentally handicapped (EMR) secondary school students. The various stages of VERT's development are traced: (1) visits with vocational trade…

Q-Thruster Breadboard Campaign Project

NASA Technical Reports Server (NTRS)

White, Harold

2014-01-01

Dr. Harold "Sonny" White has developed the physics theory basis for utilizing the quantum vacuum to produce thrust. The engineering implementation of the theory is known as Q-thrusters. During FY13, three test campaigns were conducted that conclusively demonstrated tangible evidence of Q-thruster physics with measurable thrust bringing the TRL up from TRL 2 to early TRL 3. This project will continue with the development of the technology to a breadboard level by leveraging the most recent NASA/industry test hardware. This project will replace the manual tuning process used in the 2013 test campaign with an automated Radio Frequency (RF) Phase Lock Loop system (precursor to flight-like implementation), and will redesign the signal ports to minimize RF leakage (improves efficiency). This project will build on the 2013 test campaign using the above improvements on the test implementation to get ready for subsequent Independent Verification and Validation testing at Glenn Research Center (GRC) and Jet Propulsion Laboratory (JPL) in FY 2015. Q-thruster technology has a much higher thrust to power than current forms of electric propulsion (7x Hall thrusters), and can significantly reduce the total power required for either Solar Electric Propulsion (SEP) or Nuclear Electric Propulsion (NEP). Also, due to the high thrust and high specific impulse, Q-thruster technology will greatly relax the specific mass requirements for in-space nuclear reactor systems. Q-thrusters can reduce transit times for a power-constrained architecture.

Educational Technology. Special Hearing before a Subcommittee of the Committee on Appropriations. United States Senate, One Hundred Fourth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Committee on Appropriations.

This document presents witness testimony and supplemental materials from a Congressional hearing called to assess the effectiveness of federally funded educational technology programs, particularly Technology for Education, Star Schools, Ready to Learn Television, and Mathline. Other educational technologies were introduced at the hearing as well,…

A Report on the Technological Enhancements Project Evaluation: Deepening Early Learning Experiences through Technology

ERIC Educational Resources Information Center

Hupert, Naomi; Cervantes, Francisco; DeGroof, Emily

2010-01-01

As part of the "Ready to Learn" Initiative, Education Development Center, Inc. (EDC), was charged with addressing the evaluation of Technological Enhancements for the outreach efforts of three producers: Out of the Blue's Super WHY! Technology Add-On; Sesame Workshop's The Electric Company School's Initiative Curriculum; and WordWorld's eBook…

Beyond signal functions in global obstetric care: Using a clinical cascade to measure emergency obstetric readiness

PubMed Central

Dettinger, Julia; Calkins, Kimberly; Kibore, Minnie; Gachuno, Onesmus; Walker, Dilys

2018-01-01

Background Globally, the rate of reduction in delivery-associated maternal and perinatal mortality has been slow compared to improvements in post-delivery mortality in children under five. Improving clinical readiness for basic obstetric emergencies is crucial for reducing facility-based maternal deaths. Emergency readiness is commonly assessed using tracers derived from the maternal signal functions model. Objective-method We compare emergency readiness using the signal functions model and a novel clinical cascade. The cascades model readiness as the proportion of facilities with resources to identify the emergency (stage 1), treat it (stage 2) and monitor-modify therapy (stage 3). Data were collected from 44 Kenyan clinics as part of an implementation trial. Findings Although most facilities (77.0%) stock maternal signal function tracer drugs, far fewer have resources to practically identify and treat emergencies. In hypertensive emergencies for example, 38.6% of facilities have resources to identify the emergency (Stage 1 readiness, including sphygmomanometer, stethoscope, urine collection device, protein test). 6.8% have the resources to treat the emergency (Stage 2, consumables (IV Kit, fluids), durable goods (IV pole) and drugs (magnesium sulfate and hydralazine). No facilities could monitor or modify therapy (Stage 3). Across five maternal emergencies, the signal functions overestimate readiness by 54.5%. A consistent, step-wise pattern of readiness loss across signal functions and care stage emerged and was profoundly consistent at 33.0%. Significance Comparing estimates from the maternal signal functions and cascades illustrates four themes. First, signal functions overestimate practical readiness by 55%. Second, the cascade’s intuitive indicators can support cross-sector health system or program planners to more precisely measure and improve emergency care. Third, adding few variables to existing readiness inventories permits step-wise modeling of readiness loss and can inform more precise interventions. Fourth, the novel aggregate readiness loss indicator provides an innovative and intuitive approach for modeling health system emergency readiness. Additional testing in diverse contexts is warranted. PMID:29474397

The Autonomous Precision Landing and Hazard Detection and Avoidance Technology (ALHAT)

NASA Technical Reports Server (NTRS)

Epp, Chirold D.; Smith, Thomas B.

2007-01-01

As NASA plans to send humans back to the Moon and develop a lunar outpost, technologies must be developed to place humans and cargo safely, precisely, repeatedly, on the lunar surface with the capability to avoid surface hazards. Exploration Space Architecture Study requirements include the need for global lunar surface access with safe, precise landing without lighting constraints on terrain that may have landing hazards for human scale landing vehicles. Landing accuracies of perhaps 1,000 meters for sortie crew missions to 10 s of meters for Outpost class missions are required. The Autonomous precision Landing Hazard Avoidance Technology (ALHAT) project will develop the new and unique descent and landing Guidance, Navigation and Control (GNC) hardware and software technologies necessary for these capabilities. The ALHAT project will qualify a lunar descent and landing GNC system to a Technology Readiness Level (TRL) of 6 capable of supporting lunar crewed, cargo, and robotic missions. The (ALHAT) development project was chartered by NASA Headquarters in October 2006. The initial effort to write a project plan and define an ALHAT Team was followed by a fairly aggressive research and analysis effort to determine what technologies existed that could be developed and applied to the lunar landing problems indicated above. This paper describes the project development, research, analysis and concept evolution that has occurred since the assignment of the project. This includes the areas of systems engineering, GNC, sensors, sensor algorithms, simulations, fielding testing, laboratory testing, Hardware-In-The-Loop testing, system avionics and system certification concepts.

Habitat Demonstration Unit-Deep Space Habitat (HDU-DSH) Integration and Preparation for Desert RATS 2011

NASA Technical Reports Server (NTRS)

Barbeau, Zack

2011-01-01

The Habitat Demonstration Unit, or HDU, is a multi-purpose test bed that allows NASA scientists and engineers to design, develop, and test new living quarters, laboratories, and workspaces for the next generation space mission. Previous testing and integration has occurred during 2010 at the annual Desert Research and Technology Studies (Desert RATS) field testing campaign in the Arizona desert. There the HDU team tests the configuration developed for the fiscal year, or FY configuration. For FY2011, the NASA mission calls for simulating a deep space condition. The HDU-DSH, or Deep Space Habitat, will be configured with new systems and modules that will outfit the test bed with new deep space capabilities. One such addition is the new X-HAB (eXploration Habitat) Inflatable Loft. With any deep space mission there is the need for safe, suitable living quarters. The current HDU configuration does not allow for any living space at all. In fact, Desert RATS 2010 saw the crew sleeping in the Space Exploration Vehicles (SEV) instead of the HDU. The X-HAB Challenge pitted three universities against each other: Oklahoma State University, University of Maryland, and the University of Wisconsin. The winning team will have their design implemented by NASA for field testing at DRATS 2011. This paper will highlight the primary objective of getting the X-HAB field ready which involves the implementation of an elevator/handrail system along with smaller logistical and integration tasks associated with getting the HDU-DSH ready for shipment to DRATS.

Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products

NASA Astrophysics Data System (ADS)

Fauzi, Ilham; Muharram Hasby, Fariz; Irianto, Dradjad

2018-03-01

Although government is able to make mandatory standards that must be obeyed by the industry, the respective industries themselves often have difficulties to fulfil the requirements described in those standards. This is especially true in many small and medium sized enterprises that lack the required capital to invest in standard-compliant equipment and machineries. This study aims to develop a set of measurement tools for evaluating the level of readiness of production technology with respect to the requirements of a product standard based on the quality function deployment (QFD) method. By combining the QFD methodology, UNESCAP Technometric model [9] and Analytic Hierarchy Process (AHP), this model is used to measure a firm’s capability to fulfill government standard in the toy making industry. Expert opinions from both the governmental officers responsible for setting and implementing standards and the industry practitioners responsible for managing manufacturing processes are collected and processed to find out the technological capabilities that should be improved by the firm to fulfill the existing standard. This study showed that the proposed model can be used successfully to measure the gap between the requirements of the standard and the readiness of technoware technological component in a particular firm.

Revalidation of the NASA Ames 11-by 11-Foot Transonic Wind Tunnel with a Commercial Airplane Model

NASA Technical Reports Server (NTRS)

Kmak, Frank J.; Hudgins, M.; Hergert, D.; George, Michael W. (Technical Monitor)

2001-01-01

The 11-By 11-Foot Transonic leg of the Unitary Plan Wind Tunnel (UPWT) was modernized to improve tunnel performance, capability, productivity, and reliability. Wind tunnel tests to demonstrate the readiness of the tunnel for a return to production operations included an Integrated Systems Test (IST), calibration tests, and airplane validation tests. One of the two validation tests was a 0.037-scale Boeing 777 model that was previously tested in the 11-By 11-Foot tunnel in 1991. The objective of the validation tests was to compare pre-modernization and post-modernization results from the same airplane model in order to substantiate the operational readiness of the facility. Evaluation of within-test, test-to-test, and tunnel-to-tunnel data repeatability were made to study the effects of the tunnel modifications. Tunnel productivity was also evaluated to determine the readiness of the facility for production operations. The operation of the facility, including model installation, tunnel operations, and the performance of tunnel systems, was observed and facility deficiency findings generated. The data repeatability studies and tunnel-to-tunnel comparisons demonstrated outstanding data repeatability and a high overall level of data quality. Despite some operational and facility problems, the validation test was successful in demonstrating the readiness of the facility to perform production airplane wind tunnel%, tests.

Screening 5 and 6 year-old children starting primary school for development and language.

PubMed

Yılmaz, Deniz; Bayar-Muluk, Nuray; Bayoğlu, Birgül; İdil, Aysun; Anlar, Banu

2016-01-01

Beginning school is an important milestone for children. Children's readiness for school involves cognitive, physical, and emotional development. Certain school programs allow children to start first grade after 66 months of age, together with 72 month-old children. In order to estimate school readiness, we screened children before starting first grade and compared their school performance according to their age and socio-demographic characteristics. Marmara School Readiness, Denver II developmental screening, and language assessment tests were applied. Language delays were more frequent and school readiness test scores were lower in the younger group compared to older children. However, school achievement did not differ between the two age groups. Preschool education, parental income and education affected performance in most tests. Preschool screening seems effective in detecting children with lower than average developmental skills, and the school system may provide a practical opportunity for providing support to those children.

Hydrocarbonaceous material processing methods and apparatus

DOEpatents

Brecher, Lee E [Laramie, WY

2011-07-12

Methods and apparatus are disclosed for possibly producing pipeline-ready heavy oil from substantially non-pumpable oil feeds. The methods and apparatus may be designed to produce such pipeline-ready heavy oils in the production field. Such methods and apparatus may involve thermal soaking of liquid hydrocarbonaceous inputs in thermal environments (2) to generate, though chemical reaction, an increased distillate amount as compared with conventional boiling technologies.

Study of Preschool Parents and Caregivers Use of Technology and PBS KIDS Transmedia Resources: A Report to the CPB-PBS "Ready to Learn Initiative"

ERIC Educational Resources Information Center

Pasnik, Shelley; Llorente, Carlin

2012-01-01

Leaders of the CPB-PBS "Ready To Learn" Initiative understand the important role parents and caregivers play in ensuring young children's healthy development and academic learning. In order for young children, especially those living in traditionally underserved communities, to succeed at school and thrive outside of the classroom, educational…

A system architecture for sharing de-identified, research-ready brain scans and health information across clinical imaging centers.

PubMed

Chervenak, Ann L; van Erp, Theo G M; Kesselman, Carl; D'Arcy, Mike; Sobell, Janet; Keator, David; Dahm, Lisa; Murry, Jim; Law, Meng; Hasso, Anton; Ames, Joseph; Macciardi, Fabio; Potkin, Steven G

2012-01-01

Progress in our understanding of brain disorders increasingly relies on the costly collection of large standardized brain magnetic resonance imaging (MRI) data sets. Moreover, the clinical interpretation of brain scans benefits from compare and contrast analyses of scans from patients with similar, and sometimes rare, demographic, diagnostic, and treatment status. A solution to both needs is to acquire standardized, research-ready clinical brain scans and to build the information technology infrastructure to share such scans, along with other pertinent information, across hospitals. This paper describes the design, deployment, and operation of a federated imaging system that captures and shares standardized, de-identified clinical brain images in a federation across multiple institutions. In addition to describing innovative aspects of the system architecture and our initial testing of the deployed infrastructure, we also describe the Standardized Imaging Protocol (SIP) developed for the project and our interactions with the Institutional Review Board (IRB) regarding handling patient data in the federated environment.

A System Architecture for Sharing De-Identified, Research-Ready Brain Scans and Health Information Across Clinical Imaging Centers

PubMed Central

Chervenak, Ann L.; van Erp, Theo G.M.; Kesselman, Carl; D’Arcy, Mike; Sobell, Janet; Keator, David; Dahm, Lisa; Murry, Jim; Law, Meng; Hasso, Anton; Ames, Joseph; Macciardi, Fabio; Potkin, Steven G.

2015-01-01

Progress in our understanding of brain disorders increasingly relies on the costly collection of large standardized brain magnetic resonance imaging (MRI) data sets. Moreover, the clinical interpretation of brain scans benefits from compare and contrast analyses of scans from patients with similar, and sometimes rare, demographic, diagnostic, and treatment status. A solution to both needs is to acquire standardized, research-ready clinical brain scans and to build the information technology infrastructure to share such scans, along with other pertinent information, across hospitals. This paper describes the design, deployment, and operation of a federated imaging system that captures and shares standardized, de-identified clinical brain images in a federation across multiple institutions. In addition to describing innovative aspects of the system architecture and our initial testing of the deployed infrastructure, we also describe the Standardized Imaging Protocol (SIP) developed for the project and our interactions with the Institutional Review Board (IRB) regarding handling patient data in the federated environment. PMID:22941984

Comparison of OPC job prioritization schemes to generate data for mask manufacturing

NASA Astrophysics Data System (ADS)

Lewis, Travis; Veeraraghavan, Vijay; Jantzen, Kenneth; Kim, Stephen; Park, Minyoung; Russell, Gordon; Simmons, Mark

2015-03-01

Delivering mask ready OPC corrected data to the mask shop on-time is critical for a foundry to meet the cycle time commitment for a new product. With current OPC compute resource sharing technology, different job scheduling algorithms are possible, such as, priority based resource allocation and fair share resource allocation. In order to maximize computer cluster efficiency, minimize the cost of the data processing and deliver data on schedule, the trade-offs of each scheduling algorithm need to be understood. Using actual production jobs, each of the scheduling algorithms will be tested in a production tape-out environment. Each scheduling algorithm will be judged on its ability to deliver data on schedule and the trade-offs associated with each method will be analyzed. It is now possible to introduce advance scheduling algorithms to the OPC data processing environment to meet the goals of on-time delivery of mask ready OPC data while maximizing efficiency and reducing cost.

Contributions to nuclear safety and radiation technologies in Ukraine by the Science and Technology Center in Ukraine (STCU)

NASA Astrophysics Data System (ADS)

Taranenko, L.; Janouch, F.; Owsiacki, L.

2001-06-01

This paper presents Science and Technology Center in Ukraine (STCU) activities devoted to furthering nuclear and radiation safety, which is a prioritized STCU area. The STCU, an intergovernmental organization with the principle objective of non-proliferation, administers financial support from the USA, Canada, and the EU to Ukrainian projects in various scientific and technological areas; coordinates projects; and promotes the integration of Ukrainian scientists into the international scientific community, including involving western collaborators. The paper focuses on STCU's largest project to date "Program Supporting Y2K Readiness at Ukrainian NPPs" initiated in April 1999 and designed to address possible Y2K readiness problems at 14 Ukrainian nuclear reactors. Other presented projects demonstrate a wide diversity of supported directions in the fields of nuclear and radiation safety, including reactor material improvement ("Improved Zirconium-Based Elements for Nuclear Reactors"), information technologies for nuclear industries ("Ukrainian Nuclear Data Bank in Slavutich"), and radiation health science ("Diagnostics and Treatment of Radiation-Induced Injuries of Human Biopolymers").

Contribution entrepreneurial knowledge, skills competence, and self-efficacy to student entrepreneurship readiness of multimedia expertise at vocational high school in Malang

NASA Astrophysics Data System (ADS)

Islami, Pio Arfianova Ftirizky; Elmunsyah, Hakkun; Muladi

2017-09-01

This study aims to determine the contribution of entrepreneurship knowledge, skills competence, and self-efficacy to entrepreneurship readiness. The design used in this research using a quantitative approach and knowledge test techniques using regression analysis. The number of samples in this study as many as 181 students. The results showed that there was a significant contribution between entrepreneurship knowledge to entrepreneurship readiness. There is also a significant contribution between the skills competence to entrepreneurship readiness and there is a significant contribution between self-efficacy to entrepreneurship readiness. Futhermore, there is a significant contribution simultaneously between entrepreneurship knowledge, skill competence; self-efficacy to entrepreneurship readiness.

20 Meter Solar Sail Analysis and Correlation

NASA Technical Reports Server (NTRS)

Taleghani, B. K.; Lively, P. S.; Banik, J.; Murphy, D. M.; Trautt, T. A.

2005-01-01

This paper describes finite element analyses and correlation studies to predict deformations and vibration modes/frequencies of a 20-meter solar sail system developed by ATK Space Systems. Under the programmatic leadership of NASA Marshall Space Flight Center's In-Space Propulsion activity, the 20-meter solar sail program objectives were to verify the design, to assess structural responses of the sail system, to implement lessons learned from a previous 10-meter quadrant system analysis and test program, and to mature solar sail technology to a technology readiness level (TRL) of 5. For this 20 meter sail system, static and ground vibration tests were conducted in NASA Glenn Research Center's 100 meter diameter vacuum chamber at Plum Brook station. Prior to testing, a preliminary analysis was performed to evaluate test conditions and to determine sensor and actuator locations. After testing was completed, an analysis of each test configuration was performed. Post-test model refinements included updated properties to account for the mass of sensors, wiring, and other components used for testing. This paper describes the development of finite element models (FEM) for sail membranes and masts in each of four quadrants at both the component and system levels, as well as an optimization procedure for the static test/analyses correlation.

Pathways to Mathematics College Readiness in Maine

ERIC Educational Resources Information Center

Silvernail, David L; Batista, Ida A.; Sloan, James E.; Stump, Erika K.; Johnson, Amy F.

2014-01-01

The goal of this study was to examine the pathways to being college ready in mathematics. Students who enter high school already having demonstrated mathematics proficiency on a standardized test in the 8th grade have already taken a significant step towards being college ready. The best scenario is to enter high school proficient in mathematics…

Differential Caregiver and Teacher Ratings of School Readiness in a Disadvantaged Community

ERIC Educational Resources Information Center

Doyle, Orla; Finnegan, Sarah; McNamara, Kelly A.

2012-01-01

Although differential ratings by multiple informants are an important issue in survey design, few studies test the degree of difference between informants. This study examined differences in caregiver and teacher ratings of school readiness of children from a disadvantaged urban community in Ireland. School readiness was assessed using the Short…

Predicting Early School Achievement with the EDI: A Longitudinal Population-Based Study

ERIC Educational Resources Information Center

Forget-Dubois, Nadine; Lemelin, Jean-Pascal; Boivin, Michel; Dionne, Ginette; Seguin, Jean R.; Vitaro, Frank; Tremblay, Richard E.

2007-01-01

School readiness tests are significant predictors of early school achievement. Measuring school readiness on a large scale would be necessary for the implementation of intervention programs at the community level. However, assessment of school readiness is costly and time consuming. This study assesses the predictive value of a school readiness…

Factor Structure and Validation of a Set of Readiness Measures.

ERIC Educational Resources Information Center

Kaufman, Maurice; Lynch, Mervin

A study was undertaken to identify the factor structure of a battery of readiness measures and to demonstrate the concurrent and predictive validity of one instrument in that battery--the Pre-Reading Screening Procedures (PSP). Concurrent validity was determined by examining the correlation of the PSP with the Metropolitan Readiness Test (MRT),…

Measurement of Workforce Readiness Competencies: Design of Prototype Measures.

ERIC Educational Resources Information Center

O'Neil, Harold F., Jr.; And Others

A general methodology approach is suggested for measurement of workforce readiness competencies in the context of overall work by the National Center for Research on Evaluation, Standards, and Student Testing on the domain-independent measurement of workforce readiness skills. The methodology consists of 14 steps, from the initial selection of a…

The Condition of College and Career Readiness, 2011: New Hampshire

ERIC Educational Resources Information Center

ACT, Inc., 2011

2011-01-01

Annually, ACT provides a snapshot of the college and career readiness of ACT-tested high school graduates. This report is offered as a service to inform policymakers and practitioners about selected indicators of effectiveness and how that translates into readiness. It is designed to stimulate discussion, inquiry, and action. This report for the…

The Condition of College & Career Readiness, 2012: New Hampshire

ERIC Educational Resources Information Center

ACT, Inc., 2012

2012-01-01

Annually, ACT provides a snapshot of the college and career readiness of ACT-tested high school graduates. This report is offered as a service to inform policymakers and practitioners about selected indicators of effectiveness and how that translates into readiness. It is designed to stimulate discussion, inquiry, and action. This report is…

The Condition of STEM 2015. National

ERIC Educational Resources Information Center

ACT, Inc., 2015

2015-01-01

ACT has been a leader in measuring college and career readiness trends since 1959. Each August, ACT releases The Condition of College & Career Readiness (www.act.org/newsroom/data/2015), an annual report on the progress of the ACT-tested graduating class relative to college readiness. Nationally, a record 59% of the 2015 graduating class took…

Relationship between College Readiness, Oklahoma State Testing Program, and EXPLORE

ERIC Educational Resources Information Center

Martin, Rick

2010-01-01

Scope and Method of Study: The study investigated the relationship between performance on the Oklahoma State Testing Program (OSTP) for grades 3-7 and the EXPLORE in math and reading for 586 students. The EXPLORE test, a part of the ACT, is given in the eighth grade and provides college readiness benchmarks and a national percentile ranking (NPR)…

The Condition of College & Career Readiness 2017: National

ERIC Educational Resources Information Center

ACT, Inc., 2017

2017-01-01

This report looks at the progress of the 2017 ACT®-tested graduating class relative to college and career readiness. This year's report shows that 60% of students in the 2017 US graduating class took the ACT test, up from 54% in 2013. The increased number of test takers over the past several years enhances the breadth and depth of the data pool,…

Microchannel plate detector technology potential for LUVOIR and HabEx

NASA Astrophysics Data System (ADS)

Siegmund, O. H. W.; Ertley, C.; Vallerga, J. V.; Schindhelm, E. R.; Harwit, A.; Fleming, B. T.; France, K. C.; Green, J. C.; McCandliss, S. R.; Harris, W. M.

2017-08-01

Microchannel plate (MCP) detectors have been the detector of choice for ultraviolet (UV) instruments onboard many NASA missions. These detectors have many advantages, including high spatial resolution (<20 μm), photon counting, radiation hardness, large formats (up to 20 cm), and ability for curved focal plane matching. Novel borosilicate glass MCPs with atomic layer deposition combine extremely low backgrounds, high strength, and tunable secondary electron yield. GaN and combinations of bialkali/alkali halide photocathodes show promise for broadband, higher quantum efficiency. Cross-strip anodes combined with compact ASIC readout electronics enable high spatial resolution over large formats with high dynamic range. The technology readiness levels of these technologies are each being advanced through research grants for laboratory testing and rocket flights. Combining these capabilities would be ideal for UV instruments onboard the Large UV/Optical/IR Surveyor (LUVOIR) and the Habitable Exoplanet Imaging Mission (HABEX) concepts currently under study for NASA's Astrophysics Decadal Survey.

Validating a Learning Progression in Mathematical Functions for College Readiness

ERIC Educational Resources Information Center

Wilmot, Diana Bernbaum; Schoenfeld, Alan; Wilson, Mark; Champney, Danielle; Zahner, William

2011-01-01

Current college admissions tests inadequately predict college success (Geiser & Studley, 2002) and provide insufficient information for students and teachers regarding college readiness at earlier stages of students' academic careers (Olson, 2006). This article reports on the creation and validation of a more informative test rooted in college…

Effects of the Pre-K Program of Kalamazoo County Ready 4s on Kindergarten Entry Test Scores: Estimates Based on Data from the Fall of 2011 and the Fall of 2012. Upjohn Institute Working Paper No. 13-198

ERIC Educational Resources Information Center

Bartik, Timothy J.

2013-01-01

This paper uses a regression discontinuity model to examine the effects on kindergarten entrance assessments of the Kalamazoo County Ready 4s (KC Ready 4s) program, a half-day pre-K program for four-year-olds in Kalamazoo County, Michigan. The results are based on test scores and other characteristics of up to 220 children participating in KC…

Environmental, Economic, and Scalability Considerations and Trends of Selected Fuel Economy-Enhancing Biomass-Derived Blendstocks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunn, Jennifer B.; Biddy, Mary; Jones, Susanne

24 biomass-derived compounds and mixtures, identified based on their physical properties, that could be blended into fuels to improve spark ignition engine fuel economy were assessed for their economic, technology readiness, and environmental viability. These bio-blendstocks were modeled to be produced biochemically, thermochemically, or through hybrid processes. To carry out the assessment, 17 metrics were developed for which each bio-blendstock was determined to be favorable, neutral, or unfavorable. Cellulosic ethanol was included as a reference case. Overall, bio-blendstock yields in biochemical processes were lower than in thermochemical processes, in which all biomass, including lignin, is converted to a product. Bio-blendstockmore » yields were a key determinant in overall viability. Key knowledge gaps included the degree of purity needed for use as a bio-blendstock as compared to a chemical. Less stringent purification requirements for fuels could cut processing costs and environmental impacts. Additionally, more information is needed on the blendability of many of these bio-blendstocks with gasoline to support the technology readiness evaluation. Overall, the technology to produce many of these blendstocks from biomass is emerging and as it matures, these assessments must be revisited. Importantly, considering economic, environmental, and technology readiness factors in addition to physical properties of blendstocks that could be used to boost fuel economy can help spotlight those most likely to be viable in the near term.« less

New Suborbital Flight Opportunities and Funding

NASA Astrophysics Data System (ADS)

Saltman, Alexander

2013-07-01

New opportunities for suborbital research are on the horizon. Reusable suborbital vehicles will offer immediate and routine space access for scientific payloads, provide access to altitudes around 100 kilometers, create opportunities for low-cost monitoring of upper atmospheric phenomena, as well as small scale solar observation. Reduced operational cost and quick turn-around will enable equipment to be flown opportunistically, in response to specific solar activity, or in continuous test and improvement cycles. Suborbital test flights will also provide opportunities to test prospective satellite instruments in an extended microgravity environment before being launched to orbit, raising the technology readiness level (TRL) of flight hardware and reducing the risk of anomalies during missions. I discuss the capabilities of emerging suborbital vehicles, payload and integration requirements, and funding opportunities for suborbital flights at NASA.

Readiness levels for spacecraft information technologies

NASA Technical Reports Server (NTRS)

Mackey, R.; Some, R.; Aljabri, A.

2003-01-01

Presented in this paper is a modified interpretation of the traditional TRLs aimed solely at information technology. The intent of this new set of definitions is twofold: First, to enable a definitive measurement of progress among developing information technologies for spacecraft; and second, to clarify particular challenges and requirements that must be met as these technologies are validated in increasingly realistic environments.

The Role of Mobile Technologies in Pre-Service Foreign Language Teacher Education

ERIC Educational Resources Information Center

Tolosa, Constanza

2017-01-01

Pre-service teacher education plays a pivotal role in ensuring that future teachers are prepared to integrate technology effectively to their teaching. One way of improving readiness in future teachers is integrating mobile technologies to discipline-specific teacher education courses. This article presents three case studies drawn from…

Relational Data Bases--Are You Ready?

ERIC Educational Resources Information Center

Marshall, Dorothy M.

1989-01-01

Migrating from a traditional to a relational database technology requires more than traditional project management techniques. An overview of what to consider before migrating to relational database technology is presented. Leadership, staffing, vendor support, hardware, software, and application development are discussed. (MLW)

Ready, Set, Integrate!

ERIC Educational Resources Information Center

McCombs, John

2003-01-01

Describes how the American Embassy School (AES) in New Delhi, India achieved school-wide technology integration. Discusses development of a new network; beginning to mentor; organizing the Technology Integration Plan (TIP) by software application; implementing the plan; assessing progress; and results, which overall, were positive. (AEF)

Federal Barriers to Innovation

ERIC Educational Resources Information Center

Miller, Raegen; Lake, Robin

2012-01-01

With educational outcomes inadequate, resources tight, and students' academic needs growing more complex, America's education system is certainly ready for technological innovation. And technology itself is ripe to be exploited. Devices harnessing cheap computing power have become smart and connected. Voice recognition, artificial intelligence,…

Disintegration in the biogas sector--technologies and effects.

PubMed

Schumacher, Britt; Wedwitschka, Harald; Hofmann, Josephine; Denysenko, Velina; Lorenz, Helge; Liebetrau, Jan

2014-09-01

Pretreatment of organic material prior to anaerobic digestion is seen as an option to increase the overall efficiency of the process. An overview of physical, chemical, and biological disintegration (DT) of substrates in the biogas sector is given. The energy demands DT were surveyed. The technologies were evaluated by reference to the Technology Readiness Assessment Guide of the U.S. Department of Energy. The evaluation focuses on ligno-cellulosic substrates like straw. Data of a survey among biogas plant operators were analyzed regarding the prevalence of disintegration technology classes in Germany. Furthermore, biochemical methane potential tests were conducted in laboratory scale to determine the specific methane yields of un-/treated barley straw (thermal pressure hydrolysis (TPH)). A methane potential of 228 ml CH4/g VS was measured for untreated barley straw; and of 251 ml CH4/g VS for TPH-straw (190 °C, 30 min). The reaction rates in BMP were calculated between 0.0976 and 0.1443 d(-1). Copyright © 2014 Elsevier Ltd. All rights reserved.

The Congressional Science Fellow Program and Other Efforts to Help Congress and the Public Make Wiser Decisions on Technology

NASA Astrophysics Data System (ADS)

Primack, Joel

2004-05-01

For thirty years the AAAS Congressional Science and Technology Fellow Program, with which the APS program is affiliated, has been bringing scientists and engineers to work on the staffs of Congress. During the same period, many independent technology policy groups at universities, professional societies including the APS, and non-profit organizations have prepared excellent reports. But despite these efforts, U.S. science and technology policy is often terrible! For example, the current Administration contends that there is not enough scientific evidence of global warming to actually begin to do something to slow the growth in fossil fuel use, but there is plenty of evidence to support deploying a missile defense system now, and we need to be ready to test new generations of nuclear weapons. We scientists must develop a bigger public constituency for good decisions. We need to present, not only sound recommendations backed up by convincing studies, but also wise moral leadership.

Oxide_Oxide Ceramic Matrix Composite (CMC) Exhaust Mixer Development in the NASA Environmentally Responsible Aviation (ERA) Project

NASA Technical Reports Server (NTRS)

Kiser, J. Douglas; Bansal, Narottam P.; Szelagowski, James; Sokhey, Jagdish; Heffernan, Tab; Clegg, Joseph; Pierluissi, Anthony; Riedell, Jim; Wyen, Travis; Atmur, Steven;

Assessing students' readiness towards e-learning

NASA Astrophysics Data System (ADS)

Rahim, Nasrudin Md; Yusoff, Siti Hawa Mohd; Latif, Shahida Abd

2014-07-01

The usage of e-Learning methodology has become a new attraction for potential students as shown by some higher learning institutions in Malaysia. As such, Universiti Selangor (Unisel) should be ready to embark on e-Learning teaching and learning in the near future. The purpose of the study is to gauge the readiness of Unisel's students in e-Learning environment. A sample of 110 students was chosen to participate in this study which was conducted in January 2013. This sample consisted of students from various levels of study that are foundation, diploma and degree program. Using a structured questionnaire, respondents were assessed on their basic Internet skills, access to technology required for e-Learning and their attitude towards characteristics of successful e-Learning student based on study habits, abilities, motivation and time management behaviour. The result showed that respondents did have access to technology that are required for e-Learning environment, and respondents were knowledgeable regarding the basic Internet skills. The finding also showed that respondents' attitude did meet all characteristics of successful e-Learning student. Further analysis showed that there is no significant relationshipeither among gender, level of study or faculty with those characteristics. As a conclusion, the study shows that current Unisel's students are ready to participate in e-Learning environment if the institution decided to embark on e-Learning methodology.

An Overview of the Smart Sensor Inter-Agency Reference Testbench (SSIART)

NASA Technical Reports Server (NTRS)

Wagner, Raymond S.; Braham, Stephen P.; Dufour, Jean-Francois; Barton, Richard J.

2012-01-01

In this paper, we present an overview of a proposed collaboration between the National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA), which is designed to facilitate the introduction of commercial-off-the-shelf (COTS) radios for smart-sensing applications into international spaceflight programs and projects. The proposed work will produce test hardware reference designs, test software reference architectures and example implementations, test plans in reference test environments, and test results, all of which will be shared between the agencies and documented for future use by mission planners. The proposed collaborative structure together with all of the anticipated tools and results produced under the effort is collectively referred to as the Smart Sensor Inter-agency Reference Testbench or SSIART. It is intended to provide guidance in technology selection and in increasing the related readiness levels of projects and missions as well as the space industry.

All Reading Tests Are Not Created Equal: A Comparison of the State of Texas Assessment of Academic Readiness (STAAR) and the Gray Oral Reading Test-4 (GORT-4)

ERIC Educational Resources Information Center

Johnson, Kary A.; Wilson, Celia M.; Williams-Rossi, Dara

2013-01-01

This exploratory study investigated how reading comprehension was conceptualized on the new high-stakes test, the 2011-2012 State of Texas Assessment of Academic Readiness (STAAR). Specifically, comprehension, rate, and accuracy scores on the Gray Oral Reading Test 4 (GORT-4) from a group of struggling, low-SES, Hispanic middle school students (n…

The development of an online decision support tool for organizational readiness for change.

PubMed

Khan, Sobia; Timmings, Caitlyn; Moore, Julia E; Marquez, Christine; Pyka, Kasha; Gheihman, Galina; Straus, Sharon E

2014-05-10

Much importance has been placed on assessing readiness for change as one of the earliest steps of implementation, but measuring it can be a complex and daunting task. Organizations and individuals struggle with how to reliably and accurately measure readiness for change. Several measures have been developed to help organizations assess readiness, but these are often underused due to the difficulty of selecting the right measure. In response to this challenge, we will develop and test a prototype of a decision support tool that is designed to guide individuals interested in implementation in the selection of an appropriate readiness assessment measure for their setting. A multi-phase approach will be used to develop the decision support tool. First, we will identify key measures for assessing organizational readiness for change from a recently completed systematic review. Included measures will be those developed for healthcare settings (e.g., acute care, public health, mental health) and that have been deemed valid and reliable. Second, study investigators and field experts will engage in a mapping exercise to categorize individual items of included measures according to key readiness constructs from an existing framework. Third, a stakeholder panel will be recruited and consulted to determine the feasibility and relevance of the selected measures using a modified Delphi process. Fourth, findings from the mapping exercise and stakeholder consultation will inform the development of a decision support tool that will guide users in appropriately selecting change readiness measures. Fifth, the tool will undergo usability testing. Our proposed decision support tool will address current challenges in the field of organizational change readiness by aiding individuals in selecting a valid and reliable assessment measure that is relevant to user needs and practice settings. We anticipate that implementers and researchers who use our tool will be more likely to conduct readiness for change assessments in their settings when planning for implementation. This, in turn, may contribute to more successful implementation outcomes. We will test this tool in a future study to determine its efficacy and impact on implementation processes.

An investigation of the effect of nurses' technology readiness on the acceptance of mobile electronic medical record systems.

PubMed

Kuo, Kuang-Ming; Liu, Chung-Feng; Ma, Chen-Chung

2013-08-12

Adopting mobile electronic medical record (MEMR) systems is expected to be one of the superior approaches for improving nurses' bedside and point of care services. However, nurses may use the functions for far fewer tasks than the MEMR supports. This may depend on their technological personality associated to MEMR acceptance. The purpose of this study is to investigate nurses' personality traits in regard to technology readiness toward MEMR acceptance. The study used a self-administered questionnaire to collect 665 valid responses from a large hospital in Taiwan. Structural Equation modeling was utilized to analyze the collected data. Of the four personality traits of the technology readiness, the results posit that nurses are optimistic, innovative, secure but uncomfortable about technology. Furthermore, these four personality traits were all proven to have a significant impact on the perceived ease of use of MEMR while the perceived usefulness of MEMR was significantly influenced by the optimism trait only. The results also confirmed the relationships between the perceived components of ease of use, usefulness, and behavioral intention in the Technology Acceptance Model toward MEMR usage. Continuous educational programs can be provided for nurses to enhance their information technology literacy, minimizing their stress and discomfort about information technology. Further, hospital should recruit, either internally or externally, more optimistic nurses as champions of MEMR by leveraging the instrument proposed in this study. Besides, nurses' requirements must be fully understood during the development of MEMR to ensure that MEMR can meet the real needs of nurses. The friendliness of user interfaces of MEMR and the compatibility of nurses' work practices as these will also greatly enhance nurses' willingness to use MEMR. Finally, the effects of technology personality should not be ignored, indicating that hospitals should also include more employees' characteristics beyond socio-demographic profiles in their personnel databases.

An investigation of the effect of nurses’ technology readiness on the acceptance of mobile electronic medical record systems

PubMed Central

2013-01-01

Background Adopting mobile electronic medical record (MEMR) systems is expected to be one of the superior approaches for improving nurses’ bedside and point of care services. However, nurses may use the functions for far fewer tasks than the MEMR supports. This may depend on their technological personality associated to MEMR acceptance. The purpose of this study is to investigate nurses’ personality traits in regard to technology readiness toward MEMR acceptance. Methods The study used a self-administered questionnaire to collect 665 valid responses from a large hospital in Taiwan. Structural Equation modeling was utilized to analyze the collected data. Results Of the four personality traits of the technology readiness, the results posit that nurses are optimistic, innovative, secure but uncomfortable about technology. Furthermore, these four personality traits were all proven to have a significant impact on the perceived ease of use of MEMR while the perceived usefulness of MEMR was significantly influenced by the optimism trait only. The results also confirmed the relationships between the perceived components of ease of use, usefulness, and behavioral intention in the Technology Acceptance Model toward MEMR usage. Conclusions Continuous educational programs can be provided for nurses to enhance their information technology literacy, minimizing their stress and discomfort about information technology. Further, hospital should recruit, either internally or externally, more optimistic nurses as champions of MEMR by leveraging the instrument proposed in this study. Besides, nurses’ requirements must be fully understood during the development of MEMR to ensure that MEMR can meet the real needs of nurses. The friendliness of user interfaces of MEMR and the compatibility of nurses’ work practices as these will also greatly enhance nurses’ willingness to use MEMR. Finally, the effects of technology personality should not be ignored, indicating that hospitals should also include more employees’ characteristics beyond socio-demographic profiles in their personnel databases. PMID:23938040

DOE EiR at Oakridge National Lab 2008/09

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bauer, Michael

2012-11-30

This project placed an experienced technology entrepreneur at Oak Ridge National Lab, one of DOE's premier laboratories undertaking cutting edge research in a variety of fields, including energy technologies. With the goal of accelerating the commercialization of advanced energy technologies, the task was to review available technologies at the lab and identify those that qualify for licensing and commercialization by a private startup company, backed by private venture capital. During the project, more than 1,500 inventions filed at the lab were reviewed over a 1 year period; a successively smaller number was selected for more detailed review, ultimately resulting inmore » five, and then 1 technology, being reviewed for immediate commercialization. The chosen technology, consisting in computational chemistry based approached to optimization of enzymes, was tested in lab experiments, paid for by funds raised by ORNL for the purpose of proving out the effectiveness of the technology and readiness for commercialization. The experiments proved out that the technology worked however it's performance proved not yet mature enough to qualify for private venture capital funded commercialization in a high tech startup. As a consequence, the project did not result in a new startup company being formed, as originally intended.« less

METHODS OF DETERMINING PUPIL READINESS FOR SPECIFIC UNITS OF INSTRUCTION PRESENTED THROUGH SIMULATED ENVIRONMENT MEDIA.

ERIC Educational Resources Information Center

PLUMPTON, RUSSEL A.

THE METHODS FOR DETERMINING PUPIL READINESS WERE STUDIED TO DEVELOP CRITERIA FOR PUPIL PARTICIPATION IN SIMULATED ENVIRONMENT LEARNING UNITS. THE LEARNING UNITS WERE SUBPROJECTS OF COOPERATIVE RESEARCH PROJECT NUMBER 1948 (ED 003 024). EACH OF THREE UNITS IN THE PROJECT WAS EXAMINED FOR PUPIL READINESS. TEST BATTERIES WERE ASSEMBLED AND…

College Readiness Standards[TM] for EXPLORE[R], PLAN[R], and the ACT[R]: Includes Ideas for Progress

ERIC Educational Resources Information Center

ACT, Inc., 2008

2008-01-01

At the foundation of the Educational Planning and Assessment System (EPAS) programs are ACT's College Readiness Standards. The Standards offer learning strategies that are likely to help students meet state standards and acquire the more advanced concepts associated with higher EPAS test scores and, more importantly, increased college readiness.…

Promoting School Readiness in the Context of Socio-Economic Adversity: Associations with Parental Demoralization and Support for Learning

ERIC Educational Resources Information Center

Okado, Yuko; Bierman, Karen L.; Welsh, Janet A.

2014-01-01

Background: Existing research suggests that parenting stress and demoralization, as well as provision of learning activities at home, significantly affect child school readiness. However, the degree to which these dimensions of parenting uniquely influence child school readiness remains unclear. Objective: This study tested the hypothesis that…

The Effects of Written Language Awareness on First Grade Reading Achievement.

ERIC Educational Resources Information Center

Taylor, Nancy E.; Blum, Irene H.

A battery of four reading readiness assessment tasks was administered to 267 first grade students to determine if the tasks predicted reading achievement as well as the Metropolitan Readiness Test (MRT). The four tasks, which were the best predictors in a previous study of seven readiness tasks, were the aural word boundaries task, the…

Parental Notions of School Readiness: How Have They Changed and Has Preschool Made a Difference?

ERIC Educational Resources Information Center

Belfield, Clive; Garcia, Emma

2014-01-01

The authors examined school readiness from the parental perspective, focusing on parents' efforts and expectations for kindergarten in conjunction with their child's academic development. Using self-reported survey data from two waves of the National Household Education Surveys, the authors tested for changes in school readiness between 1993 and…