Sample records for technology stand der

  1. Die Grundlagen der Fernsehtechnik: Systemtheorie und Technik der Bildübertragung

    NASA Astrophysics Data System (ADS)

    Mahler, Gerhard

    Umfassende Einführung in die Grundlagen der Bewegtbild-Übertragung von den Anfängen bis zum heutigen Stand des digitalen Fernsehens mit einer aus der Praxis entstandenen systemtheoretischen Analyse. Die kompakte und anschaulich bebilderte Darstellung mit elementaren mathematischen Beschreibungen macht es dem Leser leicht, sich in die Bildübertragungstechnik einzuarbeiten. Thematische Einheiten erweitern den Wissensstoff - u.a. zu den Themen visuelle Wahrnehmung, mehrdimensionale Signaldarstellung, Farbmetrik, Digitalisierung, Elektronenoptik - und zeigen deren Anwendung auf die elektronische Bildübertragung.

  2. Transplantate und Implantate im Mittelohrbereich - Teil 1 (Stand 2002)

    NASA Astrophysics Data System (ADS)

    Kempf, Hans-Georg; Lenarz, Thomas; Eckert, Karl-Ludwig

    In Deutschland leben ungefähr 12 Millionen Menschen, die an einer ein- oder beidseitigen Schwerhörigkeit leiden. Diese kann angeboren oder im Laufe des Lebens erworben sein. Klinisch und therapeutisch wichtig ist die Unterscheidung, ob die Ursache der Schwerhörigkeit im Bereich des Mittelohres, d. h. der Schallübertragung, oder im Bereich des Innenohres, der Hörnerven und der zentralen Hörbahnabschnitte, d. h. der Schallempfindung, liegt. 2,5 Millionen Schwerhörige haben dabei das Problem der Schallübertragung, d.h. die Störung liegt im Mittelohrbereich, und hier kann man in der Regel mit operativen, mikrochirurgisch durchgeführten Massnahmen helfen [1, 2]. Im Vordergrund steht als Ursache hier die chronische Mittelohrentzündung, die sich als Perforation des Trommelfells, als Defekt oder Unterbrechung der Gehörknöchelchen oder auch als Cholesteatom, einer sogenannte Knocheneiterung äussern kann [3]. Therapeutisch und damit als Prinzip der operativen Hörverbesserung steht primär der Verschluss des Trommelfells oder eine Rekonstruktion der Gehörknöchelchen an.

  3. Implantate für den Bandscheibenersatz (Stand 1993)

    NASA Astrophysics Data System (ADS)

    Mathey, Michael; Wintermantel, Erich

    Die Bandscheiben sind besonders betroffen von Fehlhaltungen und -stellungen der Wirbelsäule. Sie unterliegen als grösstes zusammenhängendes, nicht vaskularisiertes Gewebe im Menschen, statisch und dynamisch extrem belastet, besonders der Alterung. Um die teilweise sehr starken Schmerzen bei Bandscheibenschädigungen zu lindern, ist eine Operation vielfach die einzige Hilfe. Bei dieser Operation (Nukleotomie) entfernt man das aus der Bandscheibe ausgetretene Gewebe des Gallertkerns (nucleus pulposus), welches durch Druck auf die Nervenstränge im Bereich der Wirbelsäule die Beschwerden (Ischias-Schmerz) verursacht hat. Nach der Entfernung des Gallertkerns werden die auftretenden Kräfte bei veränderter Biomechanik übertragen. Dabei erhalten die Zwischenwirbelgelenke (Facettengelenke) eine erheblich grössere Flächenpressung als dies bei intakter Bandscheibe der Fall war. Die höhere Flächenpressung kommt durch die Verringerung des Abstandes zwischen den oberen und unteren Deckplatten der benachbarten Wirbelkörper zustande, zwischen denen sich der Gallertkern befand. Durch geeignetes Training der Rückenmuskulatur kann eine Stabilisierung des operierten Bandscheibensegmentes erreicht werden, jedoch ist es eine klinische Erfahrung, dass die meisten Patienten, die momentan durch die Operation schmerzfrei geworden sind, keine adäquate zusätzliche sportliche Betätigung auf sich nehmen.

  4. Bioindikation im Grundwasser funktioniert - Erwiderung zum Kommentar von T. Scheytt zum Beitrag "Grundwasserfauna als Indikator für komplexe hydrogeologische Verhältnisse am westlichen Kaiserstuhl" von Gutjahr, S., Bork, J. & Hahn, H.J. in Grundwasser 18 (3), 173-184 (2013)

    NASA Astrophysics Data System (ADS)

    Hahn, Hans Jürgen; Gutjahr, Simon

    2014-09-01

    In seinem Kommentar schließt Traugott Scheytt die faunistische Bioindikation über die Nutzung von Grundwassermessstellen aus methodischen Gründen aus. Er postuliert auch, dass die faunistische Indikation hydrogeologischer Zusammenhänge wegen der eingeschränkten Ausbreitungsfähigkeit der Tiere in Porengrundwasserleitern nicht möglich sei und stellt grundsätzlich die Befunde unserer Untersuchungen am Kaiserstuhl in Frage. Dabei überträgt Herr Scheytt seine Erfahrungen aus der unbelebten Hydrogeologie direkt auf den Lebensraum Grundwasser. Seine Argumentation berücksichtigt dabei weder die Prinzipien der Ökologie noch den aktuellen Stand der grundwasserökologischen Forschung. Wir gehen davon aus, dass für die Untersuchungen am Kaiserstuhl sowohl unsere Arbeitshypothese wie auch die angewandten Methoden und die Interpretation der Ergebnisse der Fragestellung angemessen sind und internationalem, wissenschaftlichem Standard entsprechen. Aus den oben benannten Gründen bleiben wir dabei: Biondikation im Grundwasser funktioniert und sie bietet hervorragende Möglichkeiten, gerade auch für die Hydrogeologie.

  5. De Ontwikkeling van een PBPK Model voor VX; Stand van Zaken V013-813 en 207C (The Development of a PBPK Model for VX: Status Report)

    DTIC Science & Technology

    2006-02-01

    ing. H.C. Trap, dr. ir. M.J. van der werd zes maal gesproken over de Schans, ing. L.F. Chau, B.). Lander, invulling en de voortgang van het I.A. Cordia ...dr. ir. M.J. van der Schans, ing. L.F. Chau, J.P. Oostdijk, B.J. Lander, l.A. Cordia 25 TNO Defensie en Veiligheid, vestiging Rijswijk, Marketing en

  6. Literature Research on the Mechanical Properties of Fibre Composise Materials Analysis of the State of the Art. Volume I. (Schrifttumsrecherche zum Festigkeitsverhalten von Faserverbundwerkstoffen-Analyse des Standes der Technik-),

    DTIC Science & Technology

    1980-08-11

    cross - Bruttoquerschni tt section Zahl der Flugstunden = number of flight hours Fig 2.8 Fatigue strength of ...Relationship between residual strength, strain increase and development of damage as a function of the number of cycles (Ref 732) 118 / 0 /+45 / 90 /- CFK ... cross -section) only the nett cross -section. Number of 900 where intralaminar cracks ha! increased further. cracks had occurred 4. Delaminations

  7. Assessment of Distributed Generation Potential in JapaneseBuildings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan

    2005-05-25

    To meet growing energy demands, energy efficiency, renewable energy, and on-site generation coupled with effective utilization of exhaust heat will all be required. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems (or microgrids). This research investigates a method of choosing economically optimal DER, expanding on prior studies at the Berkeley Lab using the DER design optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM finds the optimal combination of installed equipment from available DER technologies, given prevailing utility tariffs, site electrical and thermal loads, and a menu of available equipment.more » It provides a global optimization, albeit idealized, that shows how the site energy loads can be served at minimum cost by selection and operation of on-site generation, heat recovery, and cooling. Five prototype Japanese commercial buildings are examined and DER-CAM applied to select the economically optimal DER system for each. The five building types are office, hospital, hotel, retail, and sports facility. Based on the optimization results, energy and emission reductions are evaluated. Furthermore, a Japan-U.S. comparison study of policy, technology, and utility tariffs relevant to DER installation is presented. Significant decreases in fuel consumption, carbon emissions, and energy costs were seen in the DER-CAM results. Savings were most noticeable in the sports facility (a very favourable CHP site), followed by the hospital, hotel, and office building.« less

  8. An Optimization and Assessment on DG adoption in JapanesePrototype Buildings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan

    2005-11-30

    This research investigates a method of choosing economicallyoptimal DER, expanding on prior studies at the Berkeley Lab using the DERdesign optimization program, the Distributed Energy Resources CustomerAdoption Model (DER-CAM). DER-CAM finds the optimal combination ofinstalled equipment from available DER technologies, given prevailingutility tariffs, site electrical and thermal loads, and a menu ofavailable equipment. It provides a global optimization, albeit idealized,that shows how the site energy load scan be served at minimum cost byselection and operation of on-site generation, heat recovery, andcooling. Five prototype Japanese commercial buildings are examined andDER-CAM applied to select thee conomically optimal DER system for each.The fivemore » building types are office, hospital, hotel, retail, and sportsfacility. Based on the optimization results, energy and emissionreductions are evaluated. Furthermore, a Japan-U.S. comparison study ofpolicy, technology, and utility tariffs relevant to DER installation ispresented. Significant decreases in fuel consumption, carbon emissions,and energy costs were seen in the DER-CAM results. Savings were mostnoticeable in the sports facility, followed by the hospital, hotel, andoffice building.« less

  9. Elemente moderner, schlanker Produktionssysteme

    NASA Astrophysics Data System (ADS)

    Bartholomay, Christian; Boppert, Julia; Dickmann, Eva; Dickmann, Philipp; Gröbner, Michael; Harting, Lothar; Leikep, Sabine; Michels, Friedhelm; Pfister, Johannes; Reitz, Andreas; Schedlbauer, Michael; Takeda, Hitoshi; Thews, Michael; Wilbert, Fred

    Meilensteine der modernen Produktion mit Lean Production, Total Quality Management, Six Sigma, Supply Chain Management, Lean Management und Lean Enterprise können zu effizienteren Abläufen führen. In der betrieblichen Praxis existiert jedoch eine Vielzahl von Zielkonflikten basierend auf Richtlinien von Material Requirements Planning- (MRP), Controlling- und anderen Systemen. Nur wenige Spezialisten in größeren Unternehmen sind im Stande, die Komplexität über die Grenzen eines Fachgebiets hinaus im Detail zu verstehen. Fachübergreifendes Verständnis scheitert an der Komplexität der Gesamtproblematik. Entscheidungen verschiedenster Fachbereiche begrenzen die maximal erreichbare Effizienz des Materialflusses. Logistik und Materialfluss werden daher in vielen Unternehmen als unabdingbare Kernkompetenz verstanden. Um eine schlanke Produktion, einen optimalen Materialfluss und somit minimale Produktkosten zu erreichen, sind folglich vielfältige andere Fachthemen als Vorraussetzungen zu beherrschen. Erst dann ist es in der Produktionslogistik möglich, im Vergleich zu einem Top-Benchmark erfolgreich zu sein. Um im täglichen Konkurrenzkampf die Nase auch morgen noch vorne zu haben" ist es nötig, über den Preis hinaus auch noch völlig andere Problemstellungen zu beherrschen.

  10. Important Factors for Early Market Microgrids: Demand Response and Plug-in Electric Vehicle Charging

    NASA Astrophysics Data System (ADS)

    White, David Masaki

    Microgrids are evolving concepts that are growing in interest due to their potential reliability, economic and environmental benefits. As with any new concept, there are many unresolved issues with regards to planning and operation. In particular, demand response (DR) and plug-in electric vehicle (PEV) charging are viewed as two key components of the future grid and both will likely be active technologies in the microgrid market. However, a better understanding of the economics associated with DR, the impact DR can have on the sizing of distributed energy resource (DER) systems and how to accommodate and price PEV charging is necessary to advance microgrid technologies. This work characterizes building based DR for a model microgrid, calculates the DER systems for a model microgrid under DR through a minimization of total cost, and determines pricing methods for a PEV charging station integrated with an individual building on the model microgrid. It is shown that DR systems which consist only of HVAC fan reductions provide potential economic benefits to the microgrid through participation in utility DR programs. Additionally, peak shaving DR reduces the size of power generators, however increasing DR capacity does not necessarily lead to further reductions in size. As it currently stands for a microgrid that is an early adopter of PEV charging, current installation costs of PEV charging equipment lead to a system that is not competitive with established commercial charging networks or to gasoline prices for plug-in hybrid electric vehicles (PHEV).

  11. Energy Technology Allocation for Distributed Energy Resources: A Technology-Policy Framework

    NASA Astrophysics Data System (ADS)

    Mallikarjun, Sreekanth

    Distributed energy resources (DER) are emerging rapidly. New engineering technologies, materials, and designs improve the performance and extend the range of locations for DER. In contrast, constructing new or modernizing existing high voltage transmission lines for centralized generation are expensive and challenging. In addition, customer demand for reliability has increased and concerns about climate change have created a pull for swift renewable energy penetration. In this context, DER policy makers, developers, and users are interested in determining which energy technologies to use to accommodate different end-use energy demands. We present a two-stage multi-objective strategic technology-policy framework for determining the optimal energy technology allocation for DER. The framework simultaneously considers economic, technical, and environmental objectives. The first stage utilizes a Data Envelopment Analysis model for each end-use to evaluate the performance of each energy technology based on the three objectives. The second stage incorporates factor efficiencies determined in the first stage, capacity limitations, dispatchability, and renewable penetration for each technology, and demand for each end-use into a bottleneck multi-criteria decision model which provides the Pareto-optimal energy resource allocation. We conduct several case studies to understand the roles of various distributed energy technologies in different scenarios. We construct some policy implications based on the model results of set of case studies.

  12. Materials Science and Device Physics of 2-Dimensional Semiconductors

    NASA Astrophysics Data System (ADS)

    Fang, Hui

    Materials and device innovations are the keys to future technology revolution. For MOSFET scaling in particular, semiconductors with ultra-thin thickness on insulator platform is currently of great interest, due to the potential of integrating excellent channel materials with the industrially mature Si processing. Meanwhile, ultra-thin thickness also induces strong quantum confinement which in turn affect most of the material properties of these 2-dimensional (2-D) semiconductors, providing unprecedented opportunities for emerging technologies. In this thesis, multiple novel 2-D material systems are explored. Chapter one introduces the present challenges faced by MOSFET scaling. Chapter two covers the integration of ultrathin III V membranes with Si. Free standing ultrathin III-V is studied to enable high performance III-V on Si MOSFETs with strain engineering and alloying. Chapter three studies the light absorption in 2-D membranes. Experimental results and theoretical analysis reveal that light absorption in the 2-D quantum membranes is quantized into a fundamental physical constant, where we call it the quantum unit of light absorption, irrelevant of most of the material dependent parameters. Chapter four starts to focus on another 2-D system, atomic thin layered chalcogenides. Single and few layered chalcogenides are first explored as channel materials, with focuses in engineering the contacts for high performance MOSFETs. Contact treatment by molecular doping methods reveals that many layered chalcogenides other than MoS2 exhibit good transport properties at single layer limit. Finally, Chapter five investigated 2-D van der Waals heterostructures built from different single layer chalcogenides. The investigation in a WSe2/MoS2 hetero-bilayer shows a large Stokes like shift between photoluminescence peak and lowest absorption peak, as well as strong photoluminescence intensity, consistent with spatially indirect transition in a type II band alignment in this van der Waals heterostructure. This result enables new family of semiconductor heterostructures having tunable optoelectronic properties with customized composite layers and highlights the ability to build van der Waals semiconductor heterostructure lasers/LEDs.

  13. [Vegetarische und vegane Ernährung bei Kindern - Stand der Forschung und Forschungsbedarf].

    PubMed

    Keller, Markus; Müller, Stine

    2016-01-01

    Die Praxis vegetarischer Ernährungsformen ist in Deutschland im letzten Jahrzehnt deutlich angestiegen. Allerdings ist der Anteil vegetarischer und veganer Kinder dabei unbekannt. Studien mit Erwachsenen zeigen das präventive Potenzial, aber auch potenzielle Schwachstellen pflanzenbasierter Kostformen. Die Vorteile und Risiken einer vegetarischen bzw. veganen Ernährung im Kindesalter wurden bisher jedoch relativ selten untersucht. Außerdem lassen das unterschiedliche Alter der Kinder, das heterogene Studiendesign sowie die teilweise geringe Probandenzahl der Studien keine verbindlichen Aussagen zu. In dieser Übersichtsarbeit werden die Ergebnisse der wenigen Studien zu vegetarisch und vegan ernährten Kindern (< 12 Jahren) in Nordamerika und Europa zusammengefasst. Demnach lag die Zufuhr von Nahrungsenergie und Makronährstoffen vegetarischer und veganer Kinder meist näher an den Empfehlungen der Fachgesellschaften als die Ernährung gleichaltriger Mischkostkinder. Ebenso wiesen vegetarisch und vegan ernährte Kinder eine höhere Zufuhr von und bessere Versorgung mit verschiedenen Vitaminen und Mineralstoffen auf. Häufiger zeigten sich jedoch Defizite bei Vitamin B12, Zink, Kalzium, Eisen und Vitamin D. Das Wachstum und die Entwicklung vegetarisch und vegan ernährter Kinder entsprachen weitgehend den Referenzstandards, wobei sie dazu tendierten, leichter, schlanker und (< 5 Jahren) auch kleiner zu sein. Aufgrund der unzureichenden Studienlage besteht erheblicher Forschungsbedarf zu den Auswirkungen einer vegetarischen und veganen Ernährung im Kindesalter. © 2016 S. Karger GmbH, Freiburg.

  14. Distributed Energy Systems Integration and Demand Optimization for Autonomous Operations and Electric Grid Transactions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ghatikar, Girish; Mashayekh, Salman; Stadler, Michael

    Distributed power systems in the U.S. and globally are evolving to provide reliable and clean energy to consumers. In California, existing regulations require significant increases in renewable generation, as well as identification of customer-side distributed energy resources (DER) controls, communication technologies, and standards for interconnection with the electric grid systems. As DER deployment expands, customer-side DER control and optimization will be critical for system flexibility and demand response (DR) participation, which improves the economic viability of DER systems. Current DER systems integration and communication challenges include leveraging the existing DER and DR technology and systems infrastructure, and enabling optimized cost,more » energy and carbon choices for customers to deploy interoperable grid transactions and renewable energy systems at scale. Our paper presents a cost-effective solution to these challenges by exploring communication technologies and information models for DER system integration and interoperability. This system uses open standards and optimization models for resource planning based on dynamic-pricing notifications and autonomous operations within various domains of the smart grid energy system. It identifies architectures and customer engagement strategies in dynamic DR pricing transactions to generate feedback information models for load flexibility, load profiles, and participation schedules. The models are tested at a real site in California—Fort Hunter Liggett (FHL). Furthermore, our results for FHL show that the model fits within the existing and new DR business models and networked systems for transactive energy concepts. Integrated energy systems, communication networks, and modeling tools that coordinate supply-side networks and DER will enable electric grid system operators to use DER for grid transactions in an integrated system.« less

  15. Nanometre-thick single-crystalline nanosheets grown at the water-air interface

    NASA Astrophysics Data System (ADS)

    Wang, Fei; Seo, Jung-Hun; Luo, Guangfu; Starr, Matthew B.; Li, Zhaodong; Geng, Dalong; Yin, Xin; Wang, Shaoyang; Fraser, Douglas G.; Morgan, Dane; Ma, Zhenqiang; Wang, Xudong

    2016-01-01

    To date, the preparation of free-standing 2D nanomaterials has been largely limited to the exfoliation of van der Waals solids. The lack of a robust mechanism for the bottom-up synthesis of 2D nanomaterials from non-layered materials has become an obstacle to further explore the physical properties and advanced applications of 2D nanomaterials. Here we demonstrate that surfactant monolayers can serve as soft templates guiding the nucleation and growth of 2D nanomaterials in large area beyond the limitation of van der Waals solids. One- to 2-nm-thick, single-crystalline free-standing ZnO nanosheets with sizes up to tens of micrometres are synthesized at the water-air interface. In this process, the packing density of surfactant monolayers adapts to the sub-phase metal ions and guides the epitaxial growth of nanosheets. It is thus named adaptive ionic layer epitaxy (AILE). The electronic properties of ZnO nanosheets and AILE of other materials are also investigated.

  16. The effects of van der Waals attractions on cloud droplet growth by coalescence

    NASA Technical Reports Server (NTRS)

    Rogers, Jan R.; Davis, Robert H.

    1990-01-01

    The inclusion of van der Waals attractions in the interaction between cloud droplets has been recently shown to significantly increase the collision efficiencies of the smaller droplets. In the current work, these larger values for the collision efficiencies are used in a population dynamics model of the droplet size distribution evolution with time, in hopes of at least partially resolving the long-standing paradox in cloud microphysics that predicted rates of the onset of precipitation are generally much lower than those which are observed. Evolutions of several initial cloud droplet spectra have been tracked in time. Size evolutions are compared as predicted from the use of collision efficiencies computed using two different models to allow for droplet-droplet contact: one which considers slip flow effects only, and one which considers the combined effects of van der Waals forces and slip flow. The rate at which the droplet mass density function shifts to larger droplet sizes is increased by typically 20-25 percent, when collision efficiencies which include van der Waals forces are used.

  17. 10. Freiburger Symposium 2011 der SCG-Division Industrielle Chemie Technology Progress, Success Key for our Production Sites.

    PubMed

    Naef, Olivier

    2012-01-01

    This short paper presents the abstracts of the different presentations during 10. Freiburger Symposium 2011 der SCG-Division Industrielle Chemie: Technology Progress, Success key for our production sites held Thursday and Friday, September 29 and 30, 2011 at the Ecole d'ingénieurs et d'architectes de Fribourg (Switzerland).

  18. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (English Version)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating thesemore » distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a global optimization, albeit idealized, that shows how the necessary useful energy loads can be provided for at minimum cost by selection and operation of on-site generation, heat recovery, cooling, and efficiency improvements. This study examines five prototype commercial buildings and uses DER-CAM to select the economically optimal DER system for each. The five building types are office, hospital, hotel, retail, and sports facility. Each building type was considered for both 5,000 and 10,000 square meter floor sizes. The energy consumption of these building types is based on building energy simulation and published literature. Based on the optimization results, energy conservation and the emissions reduction were also evaluated. Furthermore, a comparison study between Japan and the U.S. has been conducted covering the policy, technology and the utility tariffs effects on DER systems installations. This study begins with an examination of existing DER research. Building energy loads were then generated through simulation (DOE-2) and scaled to match available load data in the literature. Energy tariffs in Japan and the U.S. were then compared: electricity prices did not differ significantly, while commercial gas prices in Japan are much higher than in the U.S. For smaller DER systems, the installation costs in Japan are more than twice those in the U.S., but this difference becomes smaller with larger systems. In Japan, DER systems are eligible for a 1/3 rebate of installation costs, while subsidies in the U.S. vary significantly by region and application. For 10,000 m{sup 2} buildings, significant decreases in fuel consumption, carbon emissions, and energy costs were seen in the economically optimal results. This was most noticeable in the sports facility, followed the hospital and hotel. This research demonstrates that office buildings can benefit from CHP, in contrast to popular opinion. For hospitals and sports facilities, the use of waste heat is particularly effective for water and space heating. For the other building types, waste heat is most effectively used for both heating and cooling. The same examination was done for the 5,000 m{sup 2} buildings. Although CHP installation capacity is smaller and the payback periods are longer, economic, fuel efficiency, and environmental benefits are still seen. While these benefits remain even when subsidies are removed, the increased installation costs lead to lower levels of installation capacity and thus benefit.« less

  19. Advanced Communication and Control Solutions of Distributed Energy Resources (DER)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Asgeirsson, Haukur; Seguin, Richard; Sherding, Cameron

    2007-01-10

    This report covers work performed in Phase II of a two phase project whose objective was to demonstrate the aggregation of multiple Distributed Energy Resources (DERs) and to offer them into the energy market. The Phase I work (DE-FC36-03CH11161) created an integrated, but distributed, system and procedures to monitor and control multiple DERs from numerous manufacturers connected to the electric distribution system. Procedures were created which protect the distribution network and personnel that may be working on the network. Using the web as the communication medium for control and monitoring of the DERs, the integration of information and security wasmore » accomplished through the use of industry standard protocols such as secure SSL,VPN and ICCP. The primary objective of Phase II was to develop the procedures for marketing the power of the Phase I aggregated DERs in the energy market, increase the number of DER units, and implement the marketing procedures (interface with ISOs) for the DER generated power. The team partnered with the Midwest Independent System Operator (MISO), the local ISO, to address the energy market and demonstrate the economic dispatch of DERs in response to market signals. The selection of standards-based communication technologies offers the ability of the system to be deployed and integrated with other utilities’ resources. With the use of a data historian technology to facilitate the aggregation, the developed algorithms and procedures can be verified, audited, and modified. The team has demonstrated monitoring and control of multiple DERs as outlined in phase I report including procedures to perform these operations in a secure and safe manner. In Phase II, additional DER units were added. We also expanded on our phase I work to enhance communication security and to develop the market model of having DERs, both customer and utility owned, participate in the energy market. We are proposing a two-part DER energy market model--a utility need business model and an independent energy aggregator-business model. The approach of developing two group models of DER energy participation in the market is unique. The Detroit Edison (DECo, Utility)-led team includes: DTE Energy Technologies (Dtech, DER provider), Electrical Distribution Design (EDD, Virginia Tech company supporting EPRI’s Distribution Engineering Workstation, DEW), Systems Integration Specialists Company (SISCO, economic scheduling and real-time protocol integrator), and OSIsoft (PI software system for managing real-time information). This team is focused on developing the application engineering, including software systems necessary for DER’s integration, control and sale into the market place. Phase II Highlights Installed and tested an ICCP link with SSL (security) between DECo, the utility, and DTE Energy Technologies (DTECH), the aggregator, making DER data available to the utility for both monitoring and control. Installed and tested PI process book with circuit & DER operational models for DECo SOC/ROC operator’s use for monitoring of both utility circuit and customer DER parameters. The PI Process Book models also included DER control for the DECo SOC/ROC operators, which was tested and demonstrated control. The DER Tagging and Operating Procedures were developed, which allowed that control to be done in a safe manner, were modified for required MOC/MISO notification procedures. The Distribution Engineering Workstation (DEW) was modified to include temperature normalized load research statistics, using a 30 hour day-ahead weather feed. This allowed day-ahead forecasting of the customer load profile and the entire circuit to determine overload and low voltage problems. This forecast at the point of common coupling was passed to DTech DR SOC for use in their economic dispatch algorithm. Standard Work Instructions were developed for DER notification, sale, and operation into the MISO market. A software mechanism consisting of a suite of new and revised functionality was developed that integrated with the local ISO such that offers can be made electronically without human intervention. A suite of software was developed by DR SOC enabling DER usage in real time and day-ahead: Generation information file exchange with PI and the utility power flow A utility day-ahead information file Energy Offer Web Service Market Result Web Service Real-Time Meter Data Web Service Real-Time Notification Web Service Registered over 20 DER with MISO in Demand Response Market and demonstrated electronic sale to MISO.« less

  20. An Analysis of the DER Adoption Climate in Japan UsingOptimization Results for Prototype Buildings with U.S. Comparisons

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan

    2006-06-16

    This research demonstrates economically optimal distributedenergy resource (DER) system choice using the DER choice and operationsoptimization program, the Distributed Energy Resources Customer AdoptionModel (DER-CAM). DER-CAM finds the optimal combination of installedequipment given prevailing utility tariffs and fuel prices, siteelectrical and thermal loads (including absorption cooling), and a menuof available equipment. It provides a global optimization, albeitidealized, that shows how site useful energy loads can be served atminimum cost. Five prototype Japanese commercial buildings are examinedand DER-CAM is applied to select the economically optimal DER system foreach. Based on the optimization results, energy and emission reductionsare evaluated. Significant decreases in fuelmore » consumption, carbonemissions, and energy costs were seen in the DER-CAM results. Savingswere most noticeable in the prototype sports facility, followed by thehospital, hotel, and office building. Results show that DER with combinedheat and power equipment is a promising efficiency and carbon mitigationstrategy, but that precise system design is necessary. Furthermore, aJapan-U.S. comparison study of policy, technology, and utility tariffsrelevant to DER installation is presented.« less

  1. From the Hensen net toward four-dimensional biological oceanography

    NASA Astrophysics Data System (ADS)

    Wiebe, Peter H.; Benfield, Mark C.

    2003-01-01

    The development of quantitative zooplankton collecting systems began with Hensen (1887 Berichte der Kommssion wissenschaftlichen Untersuchung der deutschen Meere in Kiel5, 1-107; 1895 Ergebnisse der Plankton-Expedition der Humbolt-Stiftung. Kiel and Leipzig: Lipsius and Tischer ). Non-opening closing nets, opening closing nets (mostly messenger based), high-speed samplers, and planktobenthos net systems all had their start in his era - the late 1800s and early 1900s. This was also an era in which many of the fundamental questions about the structure and dynamics of the plankton in the worlds oceans were first posed. Fewer new systems were introduced between 1912 and 1950 apparently due in part to the two World Wars. The continuous plankton recorder stands out as a truly innovative device developed during this period ( Hardy 1926b Nature, London118, 630 ). Resurgence in development of mechanically-based instruments occurred during the 1950s and 1960s. A new lineage of high-speed samplers, the Gulf series, began in the 1950s and a number of variants were developed in the 1960s and 1970s. Net systems specifically designed to collect neuston first appeared in the late 1950s. During the 1960s, many focused field and experimental tank experiments were carried out to investigate the hydrodynamics of nets, and much of our knowledge concerning net design and construction criteria was developed. The advent of reliable electrical conducting cables and electrically-based control systems during this same period gave rise first to a variety of cod-end samplers and then to the precursors of the acoustically and electronically-controlled multi-net systems and environmental sensors, which appeared in the 1970s. The decade of the 1970s saw a succession of multi-net systems based both on the Bé multiple plankton sampler and on the Tucker trawl. The advent of the micro-computer stimulated and enabled the development of sophisticated control and data logging electronics for these systems in the 1980s. In the 1990s, acoustic and optical technologies gave rise to sensor systems that either complement multiple net systems or are deployed without nets. Multi-sensor systems with high data telemetry rates through electro-optical cable are now being deployed in towed bodies and on remotely operated vehicles. In the offing are new molecular technologies to identify species in situ, and realtime data analysis, image processing, and 3D/4D display. In the near future, it is likely that the use of multi-sensor systems deployed on autonomous vehicles will yield world wide coverage of the distribution and abundance of zooplankton.

  2. Air quality impacts of distributed energy resources implemented in the northeastern United States.

    PubMed

    Carreras-Sospedra, Marc; Dabdub, Donald; Brouwer, Jacob; Knipping, Eladio; Kumar, Naresh; Darrow, Ken; Hampson, Anne; Hedman, Bruce

    2008-07-01

    Emissions from the potential installation of distributed energy resources (DER) in the place of current utility-scale power generators have been introduced into an emissions inventory of the northeastern United States. A methodology for predicting future market penetration of DER that considers economics and emission factors was used to estimate the most likely implementation of DER. The methodology results in spatially and temporally resolved emission profiles of criteria pollutants that are subsequently introduced into a detailed atmospheric chemistry and transport model of the region. The DER technology determined by the methodology includes 62% reciprocating engines, 34% gas turbines, and 4% fuel cells and other emerging technologies. The introduction of DER leads to retirement of 2625 MW of existing power plants for which emissions are removed from the inventory. The air quality model predicts maximum differences in air pollutant concentrations that are located downwind from the central power plants that were removed from the domain. Maximum decreases in hourly peak ozone concentrations due to DER use are 10 ppb and are located over the state of New Jersey. Maximum decreases in 24-hr average fine particulate matter (PM2.5) concentrations reach 3 microg/m3 and are located off the coast of New Jersey and New York. The main contribution to decreased PM2.5 is the reduction of sulfate levels due to significant reductions in direct emissions of sulfur oxides (SO(x)) from the DER compared with the central power plants removed. The scenario presented here represents an accelerated DER penetration case with aggressive emission reductions due to removal of highly emitting power plants. Such scenario provides an upper bound for air quality benefits of DER implementation scenarios.

  3. Van der Waals Epitaxy of Functional Oxide Heterostructures

    NASA Astrophysics Data System (ADS)

    Chu, Ying-Hao

    In the diligent pursuit of low-power consumption, multifunctional, and environmentally friendly electronics, more sophisticated requirements on functional materials are on demand. Recently, the discovery of 2D layered materials has created a revolution to this field. Pioneered by graphene, these new 2D materials exhibit abundant unusual physical phenomena that is undiscovered in bulk forms. These materials are characterized with their layer form and almost pure 2D electronic behavior. The confinement of charge and heat transport at such ultrathin planes offers possibilities to overcome the bottleneck of present device development in thickness limitation, and thus push the technologies into next generation. Van der Waals epitaxy, an epitaxial growth method to combine 2D and 3D materials, is one of current reliable manufacturing processes to fabricate 2D materials by growing these 2D materials epitaxially on 3D materials. Then, transferring the 2D materials to the substrates for practical applications. In the mean time, van der Waals epitaxy has also been used to create free-standing 3D materials by growing 3D materials on 2D materials and then removing them from 2D materials since the interfacial boding between 2D and 3D materials should be weak van der Waals bonds. In this study, we intend to take the same concept, but to integrate a family of functional materials in order to open new avenue to flexible electronics. Due to the interplay of lattice, charge, orbital, and spin degrees of freedom, correlated electrons in oxides generate a rich spectrum of competing phases and physical properties. Recently, lots of studies have suggested that oxide heterostructures provide a powerful route to create and manipulate the degrees of freedom and offer new possibilities for next generation devices, thus create a new playground for researchers to investigate novel physics and the emergence of fascinating states of condensed matter. In this talk, we use a 2D layered material as the substrate. And we take several oxides as examples to demonstrate a pathway to integrate 3D functional oxides on 2D layered materials.

  4. Distributed Energy Resources Customer Adoption Model Plus (DER-CAM+), Version 1.0.0

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stadler, Michael; Cardorso, Goncalo; Mashayekh, Salman

    DER-CAM+ v1.0.0 is internally referred to as DER-CAM v5.0.0. Due to fundamental changes from previous versions, a new name (DER-CAM+) will be used for DER-CAM version 5.0.0 and above. DER-CAM+ is a Decision Support Tool for Decentralized Energy Systems that has been tailored for microgrid applications, and now explicitly considers electrical and thermal networks within a microgrid, ancillary services, and operating reserve. DER-CAM was initially created as an exclusively economic energy model, able to find the cost minimizing combination and operation profile of a set of DER technologies that meet energy loads of a building or microgrid for a typicalmore » test year. The previous versions of DER-CAM were formulated without modeling the electrical/thermal networks within the microgrid, and hence, used aggregate single-node approaches. Furthermore, they were not able to consider operating reserve constraints, and microgrid revenue streams from participating in ancillary services markets. This new version DER-CAM+ considers these issues by including electrical power flow and thermal flow equations and constraints in the microgrid, revenues from various ancillary services markets, and operating reserve constraints.« less

  5. Quantum synchronization of quantum van der Pol oscillators with trapped ions.

    PubMed

    Lee, Tony E; Sadeghpour, H R

    2013-12-06

    The van der Pol oscillator is the prototypical self-sustained oscillator and has been used to model nonlinear behavior in biological and other classical processes. We investigate how quantum fluctuations affect phase locking of one or many van der Pol oscillators. We find that phase locking is much more robust in the quantum model than in the equivalent classical model. Trapped-ion experiments are ideally suited to simulate van der Pol oscillators in the quantum regime via sideband heating and cooling of motional modes. We provide realistic experimental parameters for 171Yb+ achievable with current technology.

  6. Distributed Energy Systems: Security Implications of the Grid of the Future

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stamber, Kevin L.; Kelic, Andjelka; Taylor, Robert A.

    2017-01-01

    Distributed Energy Resources (DER) are being added to the nation's electric grid, and as penetration of these resources increases, they have the potential to displace or offset large-scale, capital-intensive, centralized generation. Integration of DER into operation of the traditional electric grid requires automated operational control and communication of DER elements, from system measurement to control hardware and software, in conjunction with a utility's existing automated and human-directed control of other portions of the system. Implementation of DER technologies suggests a number of gaps from both a security and a policy perspective. This page intentionally left blank.

  7. Distributed Energy Resources On-Site Optimization for Commercial Buildings with Electric and Thermal Storage Technologies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lacommare, Kristina S H; Stadler, Michael; Aki, Hirohisa

    The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic as well as environmental attractiveness of on-site generation (e.g., PV, fuel cells, reciprocating engines or microturbines operating with or without CHP) and contribute to enhanced demand response. In order to examine the impact of storage technologies on demand response and carbon emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that has the minimization of annual energy costs as its objective function. By implementing this approach in the General Algebraic Modeling System (GAMS), the problemmore » is solved for a given test year at representative customer sites, such as schools and nursing homes, to obtain not only the level of technology investment, but also the optimal hourly operating schedules. This paper focuses on analysis of storage technologies in DER optimization on a building level, with example applications for commercial buildings. Preliminary analysis indicates that storage technologies respond effectively to time-varying electricity prices, i.e., by charging batteries during periods of low electricity prices and discharging them during peak hours. The results also indicate that storage technologies significantly alter the residual load profile, which can contribute to lower carbon emissions depending on the test site, its load profile, and its adopted DER technologies.« less

  8. Energy Policy Case Study - California: Renewables and Distributed Energy Resources

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Homer, Juliet S.; Bender, Sadie R.; Weimar, Mark R.

    2016-09-19

    The purpose of this document is to present a case study of energy policies in California related to power system transformation and renewable and distributed energy resources (DERs). Distributed energy resources represent a broad range of technologies that can significantly impact how much, and when, electricity is demanded from the grid. Key policies and proceedings related to power system transformation and DERs are grouped into the following categories: 1.Policies that support achieving environmental and climate goals 2.Policies that promote deployment of DERs 3.Policies that support reliability and integration of DERs 4.Policies that promote market animation and support customer choice. Majormore » challenges going forward are forecasting and modeling DERs, regulatory and utility business model issues, reliability, valuation and pricing, and data management and sharing.« less

  9. A two-dimensional spin field-effect switch

    NASA Astrophysics Data System (ADS)

    Casanova, Felix

    The integration of the spin degree of freedom in charge-based electronic devices has revolutionised both sensing and memory capability in microelectronics. Further development in spintronic devices requires electrical manipulation of spin current for logic operations. The mainstream approach followed so far, inspired by the seminal proposal of the Datta and Das spin modulator, has relied on the spin-orbit field as a medium for electrical control of the spin state. However, the still standing challenge is to find a material whose spin-orbit coupling (SOC) is weak enough to transport spins over long distances, while also being strong enough to allow their electrical manipulation. In our recent work, we demonstrate a radically different approach by engineering a van der Waals heterostructure from atomically thin crystals, and which combines the superior spin transport properties of graphene with the strong SOC of MoS2, a transition metal dichalcogenide with semiconducting properties. The spin transport in the graphene channel is modulated between ON and OFF states by tuning the spin absorption into the MoS2 layer with a gate electrode. Our demonstration of a spin field-effect switch using two-dimensional (2D) materials identifies a new route towards spin logic operations for beyond CMOS technology. Furthermore, the van der Waals heterostructure at the core of our experiments opens the path for fundamental research of exotic transport properties predicted for transition metal dichalcogenides, in which electrical spin injection has so far been elusive.

  10. Initiative Within the Philosophy of Auftragstaktik: Determining Factors of the Understanding of Initiative in the German Army, 1806-1955

    DTIC Science & Technology

    2015-01-01

    Führung und Gefecht der verbundenen Waffen (Com- mand and Combat Employment of the Combined Arms).7 Part One of the manual was published in 1921 and...der verbundenen Waffen mar- ked the German Army’s transition into modern doctrine. No longer was the capstone doctrine predominantly an infantry...the Führung und Gefecht der verbundenen Waffen according to contemporary levels of technological development achieved by 1933.17 More significant from

  11. Review of Radar Absorbing Materials

    DTIC Science & Technology

    2005-01-01

    Symposium, 1990. AP-S. Merging technologies for the 90’s. Digest 1990, 3, 1212. (30) Nortier, J. R., Van der Neut , C.A., Baker, D.E. Microwave Journal...1987, 219. (31) Kasevich, R. S.; Broderick, F., US Patent 5223849. 1993. (32) Van Der Plas, G., Barel, A., Schweicher, E. Antennas and Propagation

  12. Revisiting the adsorption of copper-phthalocyanine on Au(111) including van der Waals corrections.

    PubMed

    Lüder, Johann; Eriksson, Olle; Sanyal, Biplab; Brena, Barbara

    2014-03-28

    We have studied the adsorption of copper-phthalocyanine on Au(111) by means of van der Waals corrected density functional theory using the Tkatchenko-Scheffler method. We have compared the element and site resolved adsorption distances to recent experimental normal-incident X-ray standing wave measurements. The measured adsorption distances could be reproduced within a deviation of 1% for the Cu atom, 1% for the C atoms, and 2% for the N atoms. The molecule was found to have a magnetic moment of 1 μB distributed over the Cu and the N atoms of the pyrrole ring. Simulated scanning tunnel microscopy images based on the total and on the spin-resolved differential charge densities are provided for bias voltages of -1.45 and 1.45 eV.

  13. Interlayer excitons in a bulk van der Waals semiconductor.

    PubMed

    Arora, Ashish; Drüppel, Matthias; Schmidt, Robert; Deilmann, Thorsten; Schneider, Robert; Molas, Maciej R; Marauhn, Philipp; Michaelis de Vasconcellos, Steffen; Potemski, Marek; Rohlfing, Michael; Bratschitsch, Rudolf

    2017-09-21

    Bound electron-hole pairs called excitons govern the electronic and optical response of many organic and inorganic semiconductors. Excitons with spatially displaced wave functions of electrons and holes (interlayer excitons) are important for Bose-Einstein condensation, superfluidity, dissipationless current flow, and the light-induced exciton spin Hall effect. Here we report on the discovery of interlayer excitons in a bulk van der Waals semiconductor. They form due to strong localization and spin-valley coupling of charge carriers. By combining high-field magneto-reflectance experiments and ab initio calculations for 2H-MoTe 2 , we explain their salient features: the positive sign of the g-factor and the large diamagnetic shift. Our investigations solve the long-standing puzzle of positive g-factors in transition metal dichalcogenides, and pave the way for studying collective phenomena in these materials at elevated temperatures.Excitons, quasi-particles of bound electron-hole pairs, are at the core of the optoelectronic properties of layered transition metal dichalcogenides. Here, the authors unveil the presence of interlayer excitons in bulk van der Waals semiconductors, arising from strong localization and spin-valley coupling of charge carriers.

  14. Dislodgement and removal of dust-particles from a surface by a technique combining acoustic standing wave and airflow.

    PubMed

    Chen, Di; Wu, Junru

    2010-01-01

    It is known that there are many fine particles on the moon and Mars. Their existence may cause risk for the success of a long-term project for NASA, i.e., exploration and habitation of the moon and Mars. These dust-particles might cover the solar panels, making them fail to generate electricity, and they might also penetrate through seals on space suits, hatches, and vehicle wheels causing many incidents. The fine particles would be hazardous to human health if they were inhaled. Development of robust dust mitigation technology is urgently needed for the viable long-term exploration and habilitation of either the moon or Mars. A feasibility study to develop a dust removal technique, which may be used in space-stations or other enclosures for habitation, is reported. It is shown experimentally that the acoustic radiation force produced by a 13.8 kHz 128 dB sound-level standing wave between a 3 cm-aperture tweeter and a reflector separated by 9 cm is strong enough to overcome the van der Waals adhesive force between the dust-particles and the reflector-surface. Thus the majority of fine particles (>2 microm diameter) on a reflector-surface can be dislodged and removed by a technique combining acoustic levitation and airflow methods. The removal efficiency deteriorates for particles of less than 2 microm in size.

  15. IEEE 1547 Standards Advancing Grid Modernization

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Basso, Thomas; Chakraborty, Sudipta; Hoke, Andy

    Technology advances including development of advanced distributed energy resources (DER) and grid-integrated operations and controls functionalities have surpassed the requirements in current standards and codes for DER interconnection with the distribution grid. The full revision of IEEE Standards 1547 (requirements for DER-grid interconnection and interoperability) and 1547.1 (test procedures for conformance to 1547) are establishing requirements and best practices for state-of-the-art DER including variable renewable energy sources. The revised standards will also address challenges associated with interoperability and transmission-level effects, in addition to strictly addressing the distribution grid needs. This paper provides the status and future direction of the ongoingmore » development focus for the 1547 standards.« less

  16. Enhanced Chiral Discriminatory van der Waals Interactions Mediated by Chiral Surfaces

    NASA Astrophysics Data System (ADS)

    Barcellona, Pablo; Safari, Hassan; Salam, A.; Buhmann, Stefan Yoshi

    2017-05-01

    We predict a discriminatory interaction between a chiral molecule and an achiral molecule which is mediated by a chiral body. To achieve this, we generalize the van der Waals interaction potential between two ground-state molecules with electric, magnetic, and chiral response to nontrivial environments. The force is evaluated using second-order perturbation theory with an effective Hamiltonian. Chiral media enhance or reduce the free interaction via many-body interactions, making it possible to measure the chiral contributions to the van der Waals force with current technology. The van der Waals interaction is discriminatory with respect to enantiomers of different handedness and could be used to separate enantiomers. We also suggest a specific geometric configuration where the electric contribution to the van der Waals interaction is zero, making the chiral component the dominant effect.

  17. Applying DER-CAM for IIT Microgrid Explansion Planning

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Shahidehpour, Mohammad; Li, Zuyi; Wang, Jianhui

    The Distributed Energy Resources Customer Adoption Model (DER-CAM) is an economic and environmental model of customer DER adoption. This model has been in development at the Lawrence Berkeley National Laboratory since 2000. The objective of the model is to find optimal DER investments while minimizing total energy costs or carbon dioxide (CO2) emissions, or achieving a weighted objective that simultaneously considers both criteria. The Illinois Institute of Technology (IIT) Microgrid project started in August 2008, and the majority of the project was completed in May 2013. IIT Microgrid, funded mostly by a grant from the U.S. Department of Energy asmore » well as State and philanthropic contributions, empowers the campus consumers with the objective of establishing a smart microgrid that is highly reliable, economically viable, environmentally friendly, fuel-efficient, and resilient in extreme circumstances with a self-healing capability. In this project, we apply DER-CAM to study the expansion planning of the IIT Microgrid. First, the load data, environmental data, utility data, and technology data for the IIT Microgrid are gathered and organized to follow the DER-CAM input requirements. Then, DERCAM is applied to study the expansion planning of the IIT Microgrid for different cases, where different objectives in DER-CAM and different utility conditions are tested. Case 1 considers the objective of minimizing energy costs with fixed utility rates and 100% electric utility availability. Case 2 considers the objective of minimizing energy costs with real-time utility rates and 4 emergency weeks when the IIT Microgrid does not have access to the electric utility grid and has to operate in island mode. In Case 3, the utility rates are restored to fixed values and 100% electric utility availability is assumed, but a weighted multi-objective (Obj: a × costs + b × CO2 emissions, where a and b are weights for cost minimization and CO2 emissions minimization) is utilized to consider both energy costs and CO2 emissions. On the basis of the test results, the IIT Microgrid has the potential to benefit from investments in more DER technologies. The current annual energy costs and CO2 emissions for the IIT Microgrid are 6,495.1 k$ and 39,838.5 metric tons, respectively. This represents the baseline for this project.« less

  18. Deep Energy Retrofits - Eleven California Case Studies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Less, Brennan; Fisher, Jeremy; Walker, Iain

    2012-10-01

    This research documents and demonstrates viable approaches using existing materials, tools and technologies in owner-conducted deep energy retrofits (DERs). These retrofits are meant to reduce energy use by 70% or more, and include extensive upgrades to the building enclosure, heating, cooling and hot water equipment, and often incorporate appliance and lighting upgrades as well as the addition of renewable energy. In this report, 11 Northern California (IECC climate zone 3) DER case studies are described and analyzed in detail, including building diagnostic tests and end-use energy monitoring results. All projects recognized the need to improve the home and its systemsmore » approximately to current building code-levels, and then pursued deeper energy reductions through either enhanced technology/ building enclosure measures, or through occupant conservation efforts, both of which achieved impressive energy performance and reductions. The beyond-code incremental DER costs averaged $25,910 for the six homes where cost data were available. DERs were affordable when these incremental costs were financed as part of a remodel, averaging a $30 per month increase in the net-cost of home ownership.« less

  19. Ab initio vel ex eventu

    NASA Astrophysics Data System (ADS)

    Thiessen, P. A.; Treder, H.-J.

    Der gegenwärtige Stand der physikalischen Erkenntnis, in Sonderheit die Atomistik und die Quantentheorie, ermöglicht (in wohldefinierten Energie-Bereichen) eine ab initio-Berechnung aller physikalischen und chemischen Prozesse und Strukturen. Die Schrödinger-Gleichung erlaubt zusammen mit den Prinzipien der Quantenstatistik (Pauli-Prinzip) aus dem Planckschen Wirkungsquantum h und den atomischen Konstanten die Berechnung aller Energieumsätze, Zeitabläufe etc., die insbesondere die chemische Physik bestimmen. Die Rechenresultate gelten auch quantitativ bis auf die unvermeidliche Stochastik.Die ab initio-Berechnungen korrespondieren einerseits und sind andererseits komplementär zu den auf den Methoden der theoretischen Chemie und der klassischen Thermodynamik beruhenden Ergebnissen ex eventu. Die theoretische Behandlung ab initio führt zu mathematischen Experimenten, die die Laboratoriums-Experimente ergänzen oder auch substituieren.Translated AbstractAb initio vel ex eventuThe present state of physical knowledge, in peculiar atomistic and quantum theory, makes an ab initio calculation of all physical and chemical processes and structures possible (in well defined reaches of energy). The Schrödinger equation together with the principles of quantum statistics (Pauli principle) permits from the Planck and atomistic constants to calculate all exchanges of energy, courses of time, etc. which govern chemical physics. The calculated results are valid even quantitatively apart from the unavoidable stochastics.These ab initio calculations on the one hand correspond and are on the other complimentary to results ex eventu based on the methods of theoretical chemistry and classical thermodynamics. Theoretical treatment ab initio leads to mathematical experiments which add to or even substitute experiments in the laboratory.

  20. [Mathematics, natural sciences and technology--parts of the encyclopedia Die Kultur der Gegenwart (The culture of today)].

    PubMed

    Tobies, Renate

    2008-03-01

    The paper explores the trend of the early 20th century to consolidate mathematics, natural sciences, medicine and technology under the umbrella of one integrative culture--a tendency which contrasts with the increasing mainstream trend of separating the humanities from the natural sciences. The unifying umbrella was framed by the great encyclopedia Die Kultur der Gegenwart which was published by B. G. Teubner from 1905 to 1925 and was planned to run up to 62 volumes. We analyze the quantitative rate of the parts devoted to the humanities, the natural sciences and technology, respectively, the degree to which these parts were completed in this encyclopedia. In particular, we investigate the role of mathematicians and their reasons to find a classification for the mathematical, natural scientific and engineering parts of culture as well as their reasons, to win Nobel prize winners and other famous scientists to become co-editors and authors. We examine the published volumes in the fields of mathematics, chemistry, physics, astronomy and technology in order to show what type of publication--professional or popular--was intended. Furthermore, we illuminate how the educational reform of mathematics, natural sciences and technology of this period--which included a reform of girls' and women's education--was reflected in the encyclopedia Die Kultur der Gegenwart.

  1. Revisiting the adsorption of copper-phthalocyanine on Au(111) including van der Waals corrections

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lüder, Johann; Eriksson, Olle; Sanyal, Biplab

    2014-03-28

    We have studied the adsorption of copper-phthalocyanine on Au(111) by means of van der Waals corrected density functional theory using the Tkatchenko-Scheffler method. We have compared the element and site resolved adsorption distances to recent experimental normal-incident X-ray standing wave measurements. The measured adsorption distances could be reproduced within a deviation of 1% for the Cu atom, 1% for the C atoms, and 2% for the N atoms. The molecule was found to have a magnetic moment of 1 μ{sub B} distributed over the Cu and the N atoms of the pyrrole ring. Simulated scanning tunnel microscopy images based onmore » the total and on the spin-resolved differential charge densities are provided for bias voltages of −1.45 and 1.45 eV.« less

  2. b.i.t. Bremerhaven: Thin Clients entlasten Schulen

    NASA Astrophysics Data System (ADS)

    Das Schulamt Bremerhaven zentralisiert die Verwaltungs-IT und schafft dadurch Freiräume für pädagogische und organisatorische Herausforderungen. Pflege und Support der neuen Infrastruktur übernimmt der Dienstleister b.i.t. Bremerhaven, die Thin Clients kommen vom Bremer Hersteller IGEL Technology. Ganztagsschulen, das 12-jährige Abitur, PISA, der Wegfall der Orientierungsstufe - deutsche Schulen müssen derzeit zahlreiche organisatorische und pädagogische Herausforderungen bewältigen. Um die neuen Strukturen umsetzen zu können, werden zusätzliche Ressourcen benötigt. Das Schulamt Bremerhaven hat gemeinsam mit dem Dienstleister b.i.t. Bremerhaven (Betrieb für Informationstechnologie) eine intelligente Lösung gefunden, wie sich die benötigten finanziellen Freiräume schaffen lassen.

  3. The interactive impact of forest site and stand attributes and logging technology on stand management

    Treesearch

    C.B. LeDoux; J.E. Baumgras

    1991-01-01

    The impact of selected site and stand attributes on stand management is demonstrated using actual forest model plot data and a complete systems simulation model called MANAGE. The influence of terrain on the type of logging technology required to log a stand and the resulting impact on stand management is also illustrated. The results can be used by managers and...

  4. Status and Needs of Power Electronics for Photovoltaic Inverters

    NASA Astrophysics Data System (ADS)

    Qin, Y. C.; Mohan, N.; West, R.; Bonn, R.

    2002-06-01

    Photovoltaics is the utility connected distributed energy resource (DER) that is in widespread use today. It has one element, the inverter, which is common with all DER sources except rotating generators. The inverter is required to transfer dc energy to ac energy. With all the DER technologies, (solar, wind, fuel cells, and microturbines) the inverter is still an immature product that will result in reliability problems in fielded systems. Today, the PV inverter is a costly and complex component of PV systems that produce ac power. Inverter MTFF (mean time to first failure) is currently unacceptable. Low inverter reliability contributes to unreliable fielded systems and a loss of confidence in renewable technology. The low volume of PV inverters produced restricts the manufacturing to small suppliers without sophisticated research and reliability programs or manufacturing methods. Thus, the present approach to PV inverter supply has low probability of meeting DOE reliability goals.

  5. Arm motion coupling during locomotion-like actions: An experimental study and a dynamic model

    PubMed Central

    Shapkova, E.Yu; Terekhov, A.V.; Latash, M.L.

    2010-01-01

    We studied the coordination of arm movements in standing persons who performed an out-of-phase arm-swinging task while stepping in place or while standing. The subjects were instructed to stop one of the arms in response to an auditory signal while trying to keep the rest of the movement pattern unchanged. A significant increase was observed in the amplitude of the arm that continued swinging under both the stepping and standing conditions. This increase was similar between the right and left arms. A dynamic model was developed including two coupled non-linear van der Pol oscillators. We assumed that stopping an arm did not eliminate the coupling but introduced a new constraint. Within the model, superposition of two factors, a command to stop the ongoing movement of one arm and the coupling between the two oscillators, has been able to account for the observed effects. The model makes predictions for future experiments. PMID:21628725

  6. Foundational Report Series: Advanced Distribution Management Systems for Grid Modernization, DMS Integration of Distributed Energy Resources and Microgrids

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Singh, Ravindra; Reilly, James T.; Wang, Jianhui

    Deregulation of the electric utility industry, environmental concerns associated with traditional fossil fuel-based power plants, volatility of electric energy costs, Federal and State regulatory support of “green” energy, and rapid technological developments all support the growth of Distributed Energy Resources (DERs) in electric utility systems and ensure an important role for DERs in the smart grid and other aspects of modern utilities. DERs include distributed generation (DG) systems, such as renewables; controllable loads (also known as demand response); and energy storage systems. This report describes the role of aggregators of DERs in providing optimal services to distribution networks, through DERmore » monitoring and control systems—collectively referred to as a Distributed Energy Resource Management System (DERMS)—and microgrids in various configurations.« less

  7. Spacesuit Integrated Carbon Nanotube Dust Mitigation System for Lunar Exploration

    NASA Astrophysics Data System (ADS)

    Manyapu, Kavya Kamal

    Lunar dust proved to be troublesome during the Apollo missions. The lunar dust comprises of fine particles, with electric charges imparted by solar winds and ultraviolet radiation. As such, it adheres readily, and easily penetrates through smallest crevices into mechanisms. During Apollo missions, the powdery dust substantially degraded the performance of spacesuits by abrading suit fabric and clogging seals. Dust also degraded other critical equipment such as rovers, thermal control and optical surfaces, solar arrays, and was thus shown to be a major issue for surface operations. Even inside the lunar module, Apollo astronauts were exposed to this dust when they removed their dust coated spacesuits. This historical evidence from the Apollo missions has compelled NASA to identify dust mitigation as a critical path. This important environmental challenge must be overcome prior to sending humans back to the lunar surface and potentially to other surfaces such as Mars and asteroids with dusty environments. Several concepts were successfully investigated by the international research community for preventing deposition of lunar dust on rigid surfaces (ex: solar cells, thermal radiators). However, applying these technologies for flexible surfaces and specifically to spacesuits has remained an open challenge, due to the complexity of the suit design, geometry, and dynamics. The research presented in this dissertation brings original contribution through the development and demonstration of the SPacesuit Integrated Carbon nanotube Dust Ejection/Removal (SPIcDER) system to protect spacesuits and other flexible surfaces from lunar dust. SPIcDER leverages the Electrodynamic Dust Shield (EDS) concept developed at NASA for use on solar cells. For the SPIcDER research, the EDS concept is customized for application on spacesuits and flexible surfaces utilizing novel materials and specialized design techniques. Furthermore, the performance of the active SPIcDER system is enhanced by integrating a passive technique based on Work Function Matching coating. SPIcDER aims for a self-cleaning spacesuit that can repel lunar dust. The SPIcDER research encompassed numerous demonstrations on coupons made of spacesuit outerlayer fabric, to validate the feasibility of the concept, and provide evidence that the SPIcDER system is capable of repelling over 85% of lunar dust simulant comprising of particles in the range of 10 microm-75microm, in ambient and vacuum conditions. Furthermore, the research presented in this dissertation proves the scalability of the SPIcDER technology on a full scale functional prototype of a spacesuit knee joint-section, and demonstrates its scaled functionality and performance using lunar dust simulant. It also comprises detailed numerical simulation and parametric analysis in ANSYS Maxwell and MATLAB for optimizing the integration of the SPIcDER system into the spacesuit outerlayer. The research concludes with analysis and experimental results on design, manufacturability, operational performance, practicality of application and astronaut safety. The research aims primarily towards spacesuit dust contamination. The SPIcDER technology developed in this research is however versatile, that can be optimized to a wide range of flexible surfaces for space and terrain applications-such as exploration missions to asteroids, Mars and dust-prone applications on Earth.

  8. Non-Destructive Impermeability Testing of Land-Based Sewage Systems (zerstoerungsfreie dichtheitspruefung con grundstuecksentwaesserungsleitungen)

    DTIC Science & Technology

    2001-01-01

    CYberdeckungsh6he zunehmen. Ffr die Stabilitdt des Str ~mungszustandes ist dagegen ein weniger empfindlicher Ansaugstutzen von Vorteil, weil geringe Schwankungen im...Gerinnestr() mung mit einem Laser-Doppler- Anemometer und einem Pitot-Rohr Ltd. BD Dipl.-Ing. B. Ftirmaier M6glichkeiten der Verwertung von HausmUll und...GrundstticksentwAsserungsleitungen ISBN 3-486-26517-2 * diese Hefte k6nnen beim Oldenbourg Industrieverlag GmbH, Rosenheimer Str . 145, 81671 MUnchen bezogen werden (Preis pro Heft: 35,00 DM, Stand 2001)

  9. Lethal pedestrian--passenger car collisions in Berlin. Changed injury patterns in two different time intervals.

    PubMed

    Ehrlich, Edwin; Tischer, Anja; Maxeiner, H

    2009-04-01

    To expand the passive safety of automobiles protecting traffic participants technological innovations were done in the last decades. Objective of our retrospective analysis was to examine if these technical modifications led to a clearly changed pattern of injuries of pedestrians whose death was caused by the accidents. Another reduction concerns the exclusion of injured car passengers--only pedestrians walking or standing at the moment of collision were included. We selected time intervals 1975-1985 and 1991-2004 (=years of construction of the involved passenger cars). The cars were classified depending on their frontal construction in types as presented by Schindler et al. [Schindler V, Kühn M, Weber S, Siegler H, Heinrich T. Verletzungsmechanismen und Wirkabschätzungen der Fahrzegfrontgestaltung bei Pkw-Fussgänger-Kollisionen. Abschlussbericht im Auftrag der Deutschen Versicherungswirtschaft e.V. TU-Berlin Fachgebiet Kraftfahrzeuge (GDV) 2004:36-40]. In both periods more than 90% of all cars were from the usual types small/medium/large class. Hundred and thirty-four autopsy records of such cases from Department of Forensic Medicine (Charité Berlin) data were analysed. The data included technical information of the accidents and vehicles and the external and internal injuries of the victims. The comparison of the two periods showed a decrease of serious head injuries and femoral fractures but an increase of chest-, abdominal and pelvic injuries. This situation could be explained by an increased occurrence of soft-face-constructions and changed front design of modern passenger cars, resulting in a favourable effects concerning head impact to the car during accident. Otherwise the same kinetic energy was transferred to the (complete) victim - but because of a displacement of main focus of impact the pattern of injuries modified (went distally).

  10. Preparing Teachers to Integrate Technology into K-12 Instruction: Comparing a Stand-Alone Technology Course with a Technology-Infused Approach

    ERIC Educational Resources Information Center

    Buss, Ray R.; Wetzel, Keith; Foulger, Teresa S.; Lindsey, LeeAnn

    2015-01-01

    We compared the effectiveness of learning technological, pedagogical, and content knowledge (TPACK) domain knowledge in a new technology-infused approach for teaching technology to teacher candidates with a more traditional, stand-alone course. In the new approach, learning to use technology is infused into program methods courses. Candidates all…

  11. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thomas, H. P.; Basso, T. S.; Kroposki, B.

    The Department of Energy (DOE) Distributed Power Program (DPP) is conducting work to complete, validate in the field, and support the development of a national interconnection standard for distributed energy resources (DER), and to address the institutional and regulatory barriers slowing the commercial adoption of DER systems. This work includes support for the IEEE standards, including P1547 Standard for Interconnecting Distributed Resources with Electric Power Systems, P1589 Standard for Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems, and the P1608 Application Guide. Work is also in progress on system integration research and development (R&D) on themore » interface and control of DER with local energy systems. Additional efforts are supporting high-reliability power for industry, evaluating innovative concepts for DER applications, and exploring plug-and-play interface and control technologies for intelligent autonomous interconnection systems. This paper summarizes (1) the current status of the IEEE interconnection standards and application guides in support of DER, and (2) the R&D in progress at the National Renewable Energy Laboratory (NREL) for interconnection and system integration and application of distributed energy resources.« less

  12. Colossal terahertz nonlinearity of tunneling van der Waals gap (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Bahk, Young-Mi; Kang, Bong Joo; Kim, Yong Seung; Kim, Joon-Yeon; Kim, Won Tae; Kim, Tae Yun; Kang, Taehee; Rhie, Ji Yeah; Han, Sanghoon; Park, Cheol-Hwan; Rotermund, Fabian; Kim, Dai-Sik

    2016-09-01

    We manufactured an array of three angstrom-wide, five millimeter-long van der Waals gaps of copper-graphene-copper composite, in which unprecedented nonlinearity was observed. To probe and manipulate van der Waals gaps with long wavelength electromagnetic waves such as terahertz waves, one is required to fabricate vertically oriented van der Waals gaps sandwiched between two metal planes with an infinite length in the sense of being much larger than any of the wavelengths used. By comparison with the simple vertical stacking of metal-graphene-metal structure, in our structure, background signals are completely blocked enabling all the light to squeeze through the gap without any strays. When the angstrom-sized van der Waals gaps are irradiated with intense terahertz pulses, the transient voltage across the gap reaches up to 5 V with saturation, sufficiently strong to deform the quantum barrier of angstrom gaps. The large transient potential difference across the gap facilitates electron tunneling through the quantum barrier, blocking terahertz waves completely. This negative feedback of electron tunneling leads to colossal nonlinear optical response, a 97% decrease in the normalized transmittance. Our technology for infinitely long van der Waals gaps can be utilized for other atomically thin materials than single layer graphene, enabling linear and nonlinear angstrom optics in a broad spectral range.

  13. 45 CFR 170.460 - Good standing as an ONC-ATCB.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ....460 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.460 Good standing...

  14. 45 CFR 170.460 - Good standing as an ONC-ATCB.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ....460 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.460 Good standing...

  15. 45 CFR 170.460 - Good standing as an ONC-ATCB.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ....460 Public Welfare Department of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.460 Good standing...

  16. 45 CFR 170.560 - Good standing as an ONC-ACB.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ....560 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Permanent Certification Program for HIT § 170.560 Good standing...

  17. 45 CFR 170.460 - Good standing as an ONC-ATCB.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ....460 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.460 Good standing...

  18. 45 CFR 170.460 - Good standing as an ONC-ATCB.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ....460 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT § 170.460 Good standing...

  19. 45 CFR 170.560 - Good standing as an ONC-ACB.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ....560 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Permanent Certification Program for HIT § 170.560 Good standing...

  20. Van der Waals epitaxy of functional MoO{sub 2} film on mica for flexible electronics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ma, Chun-Hao; Department of Materials Science and Engineering, National Chiao Tung University, Hsinchu 30010, Taiwan; Lin, Jheng-Cyuan

    Flexible electronics have a great potential to impact consumer electronics and with that our daily life. Currently, no direct growth of epitaxial functional oxides on commercially available flexible substrates is possible. In this study, in order to address this challenge, muscovite, a common layered oxide, is used as a flexible substrate that is chemically similar to typical functional oxides. We fabricated epitaxial MoO{sub 2} films on muscovite via pulsed laser deposition technique. A combination of X-ray diffraction and transmission electron microscopy confirms van der Waals epitaxy of the heterostructures. The electrical transport properties of MoO{sub 2} films are similar tomore » those of the bulk. Flexible or free-standing MoO{sub 2} thin film can be obtained and serve as a template to integrate additional functional oxide layers. Our study demonstrates a remarkable concept to create flexible electronics based on functional oxides.« less

  1. Quantensprung Digitalisierung - Energiewirtschaft im 21. Jahrhundert

    NASA Astrophysics Data System (ADS)

    Thyen, Elmar

    Die Energiewende wird ohne eine umfassende Digitalisierung der Energiewirtschaft Stückwerk bleiben. Die historisch gewachsene, aus hunderten fossilen Großkraftwerken getriebene Energieversorgung hat sich durch den Zubau von mehr als einer Millionen dezentraler Erzeugungseinheiten innerhalb der vergangenen 15 Jahren radikal verändert. Zum Ausgleich von Last und Erzeugung, aber auch zum Aufbau neuer Geschäftsfelder ist die digitale Technik unverzichtbar. Ihre Möglichkeiten scheinen nahezu unbegrenzt, ihre Rolle wird in einer zukünftig nahezu vollständig elektrifizierten Gesellschaft zunehmend wichtiger werden. Neue Anbieter drängen auf den Markt und setzen die traditionelle Energiewirtschaft unter Druck. Energieversorger, die sich dem Wandel nicht stellen, drohen den Anschluss zu verpassen. Noch werden Verbundunternehmen und Stadtwerke von weitreichenden regulatorischen Vorgaben geschützt. Beispiele aus anderen Branchen zeigen aber, dass die Digitalisierung im Stande ist, regulatorische Mechanismen außer Kraft zu setzen. Zugleich verhindert die enge Regulierung und ein falsch verstandener Datenschutzbegriff in Deutschland die Entwicklung neuer Geschäftsmodelle, die energie- und volkswirtschaftlich sinnvoll wären.

  2. Distributed Generation Market Demand Model (dGen): Documentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sigrin, Benjamin; Gleason, Michael; Preus, Robert

    The Distributed Generation Market Demand model (dGen) is a geospatially rich, bottom-up, market-penetration model that simulates the potential adoption of distributed energy resources (DERs) for residential, commercial, and industrial entities in the continental United States through 2050. The National Renewable Energy Laboratory (NREL) developed dGen to analyze the key factors that will affect future market demand for distributed solar, wind, storage, and other DER technologies in the United States. The new model builds off, extends, and replaces NREL's SolarDS model (Denholm et al. 2009a), which simulates the market penetration of distributed PV only. Unlike the SolarDS model, dGen can modelmore » various DER technologies under one platform--it currently can simulate the adoption of distributed solar (the dSolar module) and distributed wind (the dWind module) and link with the ReEDS capacity expansion model (Appendix C). The underlying algorithms and datasets in dGen, which improve the representation of customer decision making as well as the spatial resolution of analyses (Figure ES-1), also are improvements over SolarDS.« less

  3. 45 CFR 170.560 - Good standing as an ONC-ACB.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ....560 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY ONC HIT Certification Program § 170.560 Good standing as an ONC...

  4. 45 CFR 170.560 - Good standing as an ONC-ACB.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ....560 Public Welfare Department of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY ONC HIT Certification Program § 170.560 Good standing as an ONC...

  5. Indoleamine 2,3 Dioxygenase (IDO) as a Mediator of Myeloid Derived Suppressor Cell Function in Breast Cancer

    DTIC Science & Technology

    2009-10-31

    activation. 4 1a: Test the suppressive activity of MDSC from IDO1-/- BALB/c mice carrying TS/A or EMT 6 mammary tumors. 1b: Using IDO-/- NeuT ...mice test if MDSC induced by spontaneous mammary tumors in NeuT +/- or NeuNT+/- mice use IDO to mediate suppression. 1c: Determine if MDSC...mechanism by which IDO-IL-6 enhances MDSC suppressive activity. References 1. Ehrlich, P . Über den jetzigen stand der karzinom forschung. Ned. T

  6. Flexible ferroelectric element based on van der Waals heteroepitaxy.

    PubMed

    Jiang, Jie; Bitla, Yugandhar; Huang, Chun-Wei; Do, Thi Hien; Liu, Heng-Jui; Hsieh, Ying-Hui; Ma, Chun-Hao; Jang, Chi-Yuan; Lai, Yu-Hong; Chiu, Po-Wen; Wu, Wen-Wei; Chen, Yi-Chun; Zhou, Yi-Chun; Chu, Ying-Hao

    2017-06-01

    We present a promising technology for nonvolatile flexible electronic devices: A direct fabrication of epitaxial lead zirconium titanate (PZT) on flexible mica substrate via van der Waals epitaxy. These single-crystalline flexible ferroelectric PZT films not only retain their performance, reliability, and thermal stability comparable to those on rigid counterparts in tests of nonvolatile memory elements but also exhibit remarkable mechanical properties with robust operation in bent states (bending radii down to 2.5 mm) and cycling tests (1000 times). This study marks the technological advancement toward realizing much-awaited flexible yet single-crystalline nonvolatile electronic devices for the design and development of flexible, lightweight, and next-generation smart devices with potential applications in electronics, robotics, automotive, health care, industrial, and military systems.

  7. Flexible ferroelectric element based on van der Waals heteroepitaxy

    PubMed Central

    Jiang, Jie; Bitla, Yugandhar; Huang, Chun-Wei; Do, Thi Hien; Liu, Heng-Jui; Hsieh, Ying-Hui; Ma, Chun-Hao; Jang, Chi-Yuan; Lai, Yu-Hong; Chiu, Po-Wen; Wu, Wen-Wei; Chen, Yi-Chun; Zhou, Yi-Chun; Chu, Ying-Hao

    2017-01-01

    We present a promising technology for nonvolatile flexible electronic devices: A direct fabrication of epitaxial lead zirconium titanate (PZT) on flexible mica substrate via van der Waals epitaxy. These single-crystalline flexible ferroelectric PZT films not only retain their performance, reliability, and thermal stability comparable to those on rigid counterparts in tests of nonvolatile memory elements but also exhibit remarkable mechanical properties with robust operation in bent states (bending radii down to 2.5 mm) and cycling tests (1000 times). This study marks the technological advancement toward realizing much-awaited flexible yet single-crystalline nonvolatile electronic devices for the design and development of flexible, lightweight, and next-generation smart devices with potential applications in electronics, robotics, automotive, health care, industrial, and military systems. PMID:28630922

  8. NREL Leadership Contributes to Revision of Key Energy Integration Standard,

    Science.gov Websites

    interconnection standard for distributed energy resource technologies, including rooftop solar panels. The , which establishes uniform requirements for interconnection of distributed energy resources (DERs), such foundation for integrating clean renewable energy technologies as well as other distributed generation and

  9. 25 Jahre - Institut fuer Geodaesie, Teil 3: Aus dem Leben des Instituts (25 Years - Institute of Geodesy, Part 3: The Life of the Institute)

    DTIC Science & Technology

    2000-01-01

    Kraftwerk Qinshan, VR China 0 1984 bis 1987 Studiumn des Markscheidewesens am Shandong Institute of Mining and Technology, VR China * 1984 bis 1993...die zur Wasserversorgung eines Kraftwerkes der ALCAN dienen sollte. Verbunden mit dem Tunnelprojekt war auch der Bau einer 80 km langen Hoch...spannungsleitung durch unverdorbene Wildnis vom Kraftwerk zur Aluminium-Schmelze in Ki- timat. Zu dieser Zeit war es das gr66Bte hydro-elektrische Projekt, das

  10. Developing a national dental education research strategy: priorities, barriers and enablers

    PubMed Central

    Barton, Karen L; Dennis, Ashley A; Rees, Charlotte E

    2017-01-01

    Objectives This study aimed to identify national dental education research (DER) priorities for the next 3–5 years and to identify barriers and enablers to DER. Setting Scotland. Participants In this two-stage online questionnaire study, we collected data with multiple dental professions (eg, dentistry, dental nursing and dental hygiene) and stakeholder groups (eg, learners, clinicians, educators, managers, researchers and academics). Eighty-five participants completed the Stage 1 qualitative questionnaire and 649 participants the Stage 2 quantitative questionnaire. Results Eight themes were identified at Stage 1. Of the 24 DER priorities identified, the top three were: role of assessments in identifying competence; undergraduate curriculum prepares for practice and promoting teamwork. Following exploratory factor analysis, the 24 items loaded onto four factors: teamwork and professionalism, measuring and enhancing performance, dental workforce issues and curriculum integration and innovation. Barriers and enablers existed at multiple levels: individual, interpersonal, institutional structures and cultures and technology. Conclusions This priority setting exercise provides a necessary first step to developing a national DER strategy capturing multiple perspectives. Promoting DER requires improved resourcing alongside efforts to overcome peer stigma and lack of valuing and motivation. PMID:28360237

  11. Deep Energy Retrofit Guidance for the Building America Solutions Center

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Less, Brennan; Walker, Iain

    2015-01-01

    The U.S. DOE Building America program has established a research agenda targeting market-relevant strategies to achieve 40% reductions in existing home energy use by 2030. Deep Energy Retrofits (DERs) are part of the strategy to meet and exceed this goal. DERs are projects that create new, valuable assets from existing residences, by bringing homes into alignment with the expectations of the 21st century. Ideally, high energy using, dated homes that are failing to provide adequate modern services to their owners and occupants (e.g., comfortable temperatures, acceptable humidity, clean, healthy), are transformed through comprehensive upgrades to the building envelope, services andmore » miscellaneous loads into next generation high performance homes. These guidance documents provide information to aid in the broader market adoption of DERs. They are intended for inclusion in the online resource the Building America Solutions Center (BASC). This document is an assemblage of multiple entries in the BASC, each of which addresses a specific aspect of Deep Energy Retrofit best practices for projects targeting at least 50% energy reductions. The contents are based upon a review of actual DERs in the U.S., as well as a mixture of engineering judgment, published guidance from DOE research in technologies and DERs, simulations of cost-optimal DERs, Energy Star and Consortium for Energy Efficiency (CEE) product criteria, and energy codes.« less

  12. The Economics of van der Waals Force Engineering

    NASA Astrophysics Data System (ADS)

    Pinto, Fabrizio

    2008-01-01

    As micro-electro-mechanical system (MEMS) fabrication continues on an ever-decreasing scale, new technological challenges must be successfully negotiated if Moore's Law is to be an even approximately valid model of the future of device miniaturization. Among the most significant obstacles is the existence of strong surface forces related to quantum mechanical van der Waals interatomic interactions, which rapidly diverge as the distance between any two neutral boundaries decreases. The van der Waals force is a contributing factor in several device failures and limitations, including, for instance, stiction and oscillator non-linearities. In the last decade, however, it has been conclusively shown that van der Waals forces are not just a MEMS limitation but can be engineered in both magnitude and sign so as to enable classes of proprietary inventions which either deliver novel capabilities or improve upon existing ones. The evolution of van der Waals force research from an almost exclusively theoretical field in quantum-electro-dynamics to an enabling nanotechnology discipline represents a useful example of the ongoing paradigm shift from government-centered to private-capital funded R&D in cutting-edge physics leading to potentially profitable products. In this paper, we discuss the reasons van der Waals force engineering may lead to the creation of thriving markets both in the short and medium terms by highlighting technical challenges that can be competitively addressed by this novel approach. We also discuss some notable obstacles to the cultural transformation of the academic research community required for the emergence of a functional van der Waals force engineering industry worldwide.

  13. Photovoltaic Effect in an Electrically Tunable van der Waals Heterojunction

    PubMed Central

    2014-01-01

    Semiconductor heterostructures form the cornerstone of many electronic and optoelectronic devices and are traditionally fabricated using epitaxial growth techniques. More recently, heterostructures have also been obtained by vertical stacking of two-dimensional crystals, such as graphene and related two-dimensional materials. These layered designer materials are held together by van der Waals forces and contain atomically sharp interfaces. Here, we report on a type-II van der Waals heterojunction made of molybdenum disulfide and tungsten diselenide monolayers. The junction is electrically tunable, and under appropriate gate bias an atomically thin diode is realized. Upon optical illumination, charge transfer occurs across the planar interface and the device exhibits a photovoltaic effect. Advances in large-scale production of two-dimensional crystals could thus lead to a new photovoltaic solar technology. PMID:25057817

  14. Modeling of thermal storage systems in MILP distributed energy resource models

    DOE PAGES

    Steen, David; Stadler, Michael; Cardoso, Gonçalo; ...

    2014-08-04

    Thermal energy storage (TES) and distributed generation technologies, such as combined heat and power (CHP) or photovoltaics (PV), can be used to reduce energy costs and decrease CO 2 emissions from buildings by shifting energy consumption to times with less emissions and/or lower energy prices. To determine the feasibility of investing in TES in combination with other distributed energy resources (DER), mixed integer linear programming (MILP) can be used. Such a MILP model is the well-established Distributed Energy Resources Customer Adoption Model (DER-CAM); however, it currently uses only a simplified TES model to guarantee linearity and short run-times. Loss calculationsmore » are based only on the energy contained in the storage. This paper presents a new DER-CAM TES model that allows improved tracking of losses based on ambient and storage temperatures, and compares results with the previous version. A multi-layer TES model is introduced that retains linearity and avoids creating an endogenous optimization problem. The improved model increases the accuracy of the estimated storage losses and enables use of heat pumps for low temperature storage charging. Ultimately,results indicate that the previous model overestimates the attractiveness of TES investments for cases without possibility to invest in heat pumps and underestimates it for some locations when heat pumps are allowed. Despite a variation in optimal technology selection between the two models, the objective function value stays quite stable, illustrating the complexity of optimal DER sizing problems in buildings and microgrids.« less

  15. Development of a QCL based IR polarimetric system for the stand-off detection and location of IEDs

    NASA Astrophysics Data System (ADS)

    Stokes, Robert J.; Normand, Erwan L.; Carrie, Iain D.; Foulger, Brian; Lewis, Colin

    2009-09-01

    Following the development of point sensing improvised explosive device (IED) technology[1] Cascade Technologies have initial work in the development of equivalent stand-off capability. Stand-off detection of IEDs is a very important technical requirement that would enable the safe identification and quantification of hazardous materials prior to a terrorist attack. This could provide advanced warning of potential danger allowing evacuation and mitigation measures to be implemented. With support from the UK government, Cascade Technologies is currently investigating technology developments aimed at addressing the above stand-off IED detection capability gap. To demonstrate and validate the concept, a novel stand-off platform will target the detection and identification of common high vapor pressure IED precursor compounds, such as hydrogen peroxide (H2O2), emanating from a point source. By actively probing a scene with polarized light, the novel platform will offer both enhanced selectivity and sensitivity as compared to traditional hyperspectral sensors, etc. The presentation will highlight the concept of this novel detection technique as well as illustrating preliminary results.

  16. Power roll gin stand technology: Evaluation and optimization of rib rail angle and ginning point modifications on a retrofitted Lummus gin stand

    USDA-ARS?s Scientific Manuscript database

    Previous studies have shown the powered roll gin stand (PRGS) is capable of improving ginning rate, turnout, and fiber quality relative to a conventional gin stand; however, most of these studies used Continental Eagle gin stands, the gin stand used to develop the initial prototype and the one used ...

  17. The Philosophy of Science and Technology in China: Political and Ideological Influences

    ERIC Educational Resources Information Center

    Guo, Yuanlin

    2014-01-01

    In China, the philosophy of science and technology (PST) is derived from "Dialectics of Nature" (DN), which is based on Engels' unfinished book "Dialektik der Natur." DN as a political ideology provides political guidance for scientists and engineers. Therefore, since 1981, "Introduction to Dialectics of Nature" (IDN)…

  18. Cyber Mutual Assistance Workshop Report

    DTIC Science & Technology

    2018-02-01

    Information Technology, Nuclear Reactors, Materials/Waste, Defense Industrial Base, Critical Manufacturing, Food/ Agriculture Government Facilities and...Manufacturing, Food/ Agriculture Government Facilities and Chemical, Commercial Facilities [DHS 2017c]. Distributed Energy Resources (DER) are

  19. Developing a national dental education research strategy: priorities, barriers and enablers.

    PubMed

    Ajjawi, Rola; Barton, Karen L; Dennis, Ashley A; Rees, Charlotte E

    2017-03-29

    This study aimed to identify national dental education research (DER) priorities for the next 3-5 years and to identify barriers and enablers to DER. Scotland. In this two-stage online questionnaire study, we collected data with multiple dental professions (eg, dentistry, dental nursing and dental hygiene) and stakeholder groups (eg, learners, clinicians, educators, managers, researchers and academics). Eighty-five participants completed the Stage 1 qualitative questionnaire and 649 participants the Stage 2 quantitative questionnaire. Eight themes were identified at Stage 1. Of the 24 DER priorities identified, the top three were: role of assessments in identifying competence; undergraduate curriculum prepares for practice and promoting teamwork. Following exploratory factor analysis, the 24 items loaded onto four factors: teamwork and professionalism, measuring and enhancing performance, dental workforce issues and curriculum integration and innovation. Barriers and enablers existed at multiple levels: individual, interpersonal, institutional structures and cultures and technology. This priority setting exercise provides a necessary first step to developing a national DER strategy capturing multiple perspectives. Promoting DER requires improved resourcing alongside efforts to overcome peer stigma and lack of valuing and motivation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  20. Evolution and predictive value of IgE responses toward a comprehensive panel of house dust mite allergens during the first 2 decades of life.

    PubMed

    Posa, Daniela; Perna, Serena; Resch, Yvonne; Lupinek, Christian; Panetta, Valentina; Hofmaier, Stephanie; Rohrbach, Alexander; Hatzler, Laura; Grabenhenrich, Linus; Tsilochristou, Olympia; Chen, Kuan-Wei; Bauer, Carl-Peter; Hoffman, Ute; Forster, Johannes; Zepp, Fred; Schuster, Antje; Wahn, Ulrich; Keil, Thomas; Lau, Susanne; Vrtala, Susanne; Valenta, Rudolf; Matricardi, Paolo Maria

    2017-02-01

    The evolution of the IgE response to the numerous allergen molecules of Dermatophagoides pteronyssinus is still unknown. We sought to characterize the evolutionary patterns of the IgE response to 12 molecules of D pteronyssinus from birth to adulthood and to investigate their determinants and clinical relevance. We investigated the clinical data and sera of 722 participants in the German Multicenter Allergy Study, a birth cohort started in 1990. Diagnoses of current allergic rhinitis (AR) related to mite allergy and asthma were based on yearly interviews at the ages of 1 to 13 years and 20 years. IgE to the extract and 12 molecules of D pteronyssinus were tested by means of ImmunoCAP and microarray technology, respectively, in sera collected at ages 1, 2, 3, 5, 6, 7, 10, 13, and 20 years. Exposure to mites at age 6 and 18 months was assessed by measuring Der p 1 weight/weight concentration in house dust. One hundred ninety-one (26.5%) of 722 participants ever had IgE to D pteronyssinus extract (≥0.35 kU A /L). At age 20 years, their IgE recognized most frequently Der p 2, Der p 1, and Der p 23 (group A molecules; prevalence, >40%), followed by Der p 5, Der p 7, Der p 4, and Der p 21 (group B molecules; prevalence, 15% to 30%) and Der p 11, Der p 18, clone 16, Der p 14, and Der p 15 (group C molecules; prevalence, <10%). IgE sensitization started almost invariably with group A molecules and expanded sequentially first to group B and finally to group C molecules. Early IgE sensitization onset, parental hay fever, and higher exposure to mites were associated with a broader polymolecular IgE sensitization pattern. Participants reaching the broadest IgE sensitization stage (ie, ABC) had significantly higher risk of mite-related AR and asthma than unsensitized participants. IgE to Der p 1 or Der p 23 at age 5 years or less predicted asthma at school age. Parental hay fever and early exposure to D pteronyssinus allergens promote IgE polysensitization to several D pteronyssinus molecules, which in turn predicts current mite-related AR and current/future asthma. These results might inspire predictive algorithms and prevention strategies against the progression of IgE sensitization to mites toward AR and asthma. Copyright © 2016 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  1. h-BN/graphene van der Waals vertical heterostructure: a fully spin-polarized photocurrent generator.

    PubMed

    Tao, Xixi; Zhang, Lei; Zheng, Xiaohong; Hao, Hua; Wang, Xianlong; Song, Lingling; Zeng, Zhi; Guo, Hong

    2017-12-21

    By constructing transport junctions using graphene-based van der Waals (vdW) heterostructures in which a zigzag-edged graphene nanoribbon (ZGNR) is sandwiched between two hexagonal boron-nitride sheets, we computationally demonstrate a new scheme for generating perfect spin-polarized quantum transport in ZGNRs by light irradiation. The mechanism lies in the lift of spin degeneracy of ZGNR induced by the stagger potential it receives from the BN sheets and the subsequent possibility of single spin excitation of electrons from the valence band to the conduction band by properly tuning the photon energy. This scheme is rather robust in that we always achieve desirable results irrespective of whether we decrease or increase the interlayer distance by applying compressive or tensile strain vertically to the sheets or shift the BN sheets in-plane relative to the graphene nanoribbons. More importantly, this scheme overcomes the long-standing difficulties in traditional ways of using solely electrical field or chemical modification for obtaining half-metallic transport in ZGNRs and thus paves a more feasible way for their application in spintronics.

  2. Zuverlässigkeit digitaler Schaltungen unter Einfluss von intrinsischem Rauschen

    NASA Astrophysics Data System (ADS)

    Kleeberger, V. B.; Schlichtmann, U.

    2011-08-01

    Die kontinuierlich fortschreitende Miniaturisierung in integrierten Schaltungen führt zu einem Anstieg des intrinsischen Rauschens. Um den Einfluss von intrinsischem Rauschen auf die Zuverlässigkeit zukünftiger digitaler Schaltungen analysieren zu können, werden Methoden benötigt, die auf CAD-Verfahren wie Analogsimulation statt auf abschätzenden Berechnungen beruhen. Dieser Beitrag stellt eine neue Methode vor, die den Einfluss von intrinsischem Rauschen in digitalen Schaltungen für eine gegebene Prozesstechnologie analysieren kann. Die Amplituden von thermischen, 1/f und Schrotrauschen werden mit Hilfe eines SPICE Simulators bestimmt. Anschließend wird der Einfluss des Rauschens auf die Schaltungszuverlässigkeit durch Simulation analysiert. Zusätzlich zur Analyse werden Möglichkeiten aufgezeigt, wie die durch Rauschen hervorgerufenen Effekte im Schaltungsentwurf mit berücksichtigt werden können. Im Gegensatz zum Stand der Technik kann die vorgestellte Methode auf beliebige Logikimplementierungen und Prozesstechnologien angewendet werden. Zusätzlich wird gezeigt, dass bisherige Ansätze den Einfluss von Rauschen bis um das Vierfache überschätzen.

  3. Observation of phonon-polaritons in thin flakes of hexagonal boron nitride on gold

    NASA Astrophysics Data System (ADS)

    Ciano, C.; Giliberti, V.; Ortolani, M.; Baldassarre, L.

    2018-04-01

    Hexagonal Boron Nitride (hBN) is a layered van der Waals material able to sustain hyperbolic phonon-polaritons within its mid-infrared reststrahlen bands. We study the effect of a metallic substrate adjacent to hBN flakes on the polariton dispersion and on the standing wave patterns in nanostructures by means of mid-infrared nanospectroscopy and nanoimaging. We exploit the gold-coated tip apex for atomic force microscopy to launch polaritons in thin hBN flakes. The photo-thermal induced mechanical resonance is used to detect the amplitude profile of polariton standing waves with a lateral resolution of 30 nm. We observe the polariton excitation spectra on hBN flakes as thin as 4 nm, thanks to the infrared field enhancement in the nanogap between the gold-coated tip apex and an ultraflat gold substrate. The data indicate no major effect of remote screening of the free electrons in gold on the phonon-polariton excitation that appears robust also against geometrical imperfections.

  4. Distributed Energy Resource Optimization Using a Software as Service (SaaS) Approach at the University of California, Davis Campus

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stadler, Michael; Marnay, Chris; Donadee, Jon

    2011-02-06

    Together with OSIsoft LLC as its private sector partner and matching sponsor, the Lawrence Berkeley National Laboratory (Berkeley Lab) won an FY09 Technology Commercialization Fund (TCF) grant from the U.S. Department of Energy. The goal of the project is to commercialize Berkeley Lab's optimizing program, the Distributed Energy Resources Customer Adoption Model (DER-CAM) using a software as a service (SaaS) model with OSIsoft as its first non-scientific user. OSIsoft could in turn provide optimization capability to its software clients. In this way, energy efficiency and/or carbon minimizing strategies could be made readily available to commercial and industrial facilities. Specialized versionsmore » of DER-CAM dedicated to solving OSIsoft's customer problems have been set up on a server at Berkeley Lab. The objective of DER-CAM is to minimize the cost of technology adoption and operation or carbon emissions, or combinations thereof. DER-CAM determines which technologies should be installed and operated based on specific site load, price information, and performance data for available equipment options. An established user of OSIsoft's PI software suite, the University of California, Davis (UCD), was selected as a demonstration site for this project. UCD's participation in the project is driven by its motivation to reduce its carbon emissions. The campus currently buys electricity economically through the Western Area Power Administration (WAPA). The campus does not therefore face compelling cost incentives to improve the efficiency of its operations, but is nonetheless motivated to lower the carbon footprint of its buildings. Berkeley Lab attempted to demonstrate a scenario wherein UCD is forced to purchase electricity on a standard time-of-use tariff from Pacific Gas and Electric (PG&E), which is a concern to Facilities staff. Additionally, DER-CAM has been set up to consider the variability of carbon emissions throughout the day and seasons. Two distinct analyses of value to UCD are possible using this approach. First, optimal investment choices for buildings under the two alternative objectives can be derived. Second, a week-ahead building operations forecaster has been written that executes DER-CAM to find an optimal operating schedule for buildings given their expected building energy services requirements, electricity prices, and local weather. As part of its matching contribution, OSIsoft provided a full implementation of PI and a server to install it on at Berkeley Lab. Using the PItoPI protocol, this gives Berkeley Lab researchers direct access to UCD's PI data base. However, this arrangement is in itself inadequate for performing optimizations. Additional data not included in UCD's PI database would be needed and the campus was not able to provide this information. This report details the process, results, and lessons learned of this commercialization project.« less

  5. IEEE 1547 and 2030 Standards for Distributed Energy Resources Interconnection and Interoperability with the Electricity Grid

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Basso, T.

    Public-private partnerships have been a mainstay of the U.S. Department of Energy and the National Renewable Energy Laboratory (DOE/NREL) approach to research and development. These partnerships also include technology development that enables grid modernization and distributed energy resources (DER) advancement, especially renewable energy systems integration with the grid. Through DOE/NREL and industry support of Institute of Electrical and Electronics Engineers (IEEE) standards development, the IEEE 1547 series of standards has helped shape the way utilities and other businesses have worked together to realize increasing amounts of DER interconnected with the distribution grid. And more recently, the IEEE 2030 series ofmore » standards is helping to further realize greater implementation of communications and information technologies that provide interoperability solutions for enhanced integration of DER and loads with the grid. For these standards development partnerships, for approximately $1 of federal funding, industry partnering has contributed $5. In this report, the status update is presented for the American National Standards IEEE 1547 and IEEE 2030 series of standards. A short synopsis of the history of the 1547 standards is first presented, then the current status and future direction of the ongoing standards development activities are discussed.« less

  6. 1. Photographic copy of original engineering drawing for Test Stand ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of original engineering drawing for Test Stand 'C.' California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'New Test Stand Plan -- Edwards Test Station' drawing no. E18/2-3, 18 January 1957. - Jet Propulsion Laboratory Edwards Facility, Test Stand C, Edwards Air Force Base, Boron, Kern County, CA

  7. Standing Tall: The Benefits of Standing Devices

    ERIC Educational Resources Information Center

    Warner, Mark P.

    2007-01-01

    In the author's opinion as a pediatric physical therapist, with the exception of a wheelchair, there is no other piece of assistive technology that is more beneficial to children and adults with special needs than a standing device. Postural symmetry during standing and walking activities is extremely important for everyone. Very few children…

  8. NREL Workshop Convenes Industry Experts on Cybersecurity and an Evolving

    Science.gov Websites

    silos in a field that demands greater collaboration, and the benefits of systemic security architecture groups to identify possible solutions to the challenges in securing DERs-from a technology, business, and

  9. An Attack-Resilient Middleware Architecture for Grid Integration of Distributed Energy Resources

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wu, Yifu; Mendis, Gihan J.; He, Youbiao

    In recent years, the increasing penetration of Distributed Energy Resources (DERs) has made an impact on the operation of the electric power systems. In the grid integration of DERs, data acquisition systems and communications infrastructure are crucial technologies to maintain system economic efficiency and reliability. Since most of these generators are relatively small, dedicated communications investments for every generator are capital cost prohibitive. Combining real-time attack-resilient communications middleware with Internet of Things (IoTs) technologies allows for the use of existing infrastructure. In our paper, we propose an intelligent communication middleware that utilizes the Quality of Experience (QoE) metrics to complementmore » the conventional Quality of Service (QoS) evaluation. Furthermore, our middleware employs deep learning techniques to detect and defend against congestion attacks. The simulation results illustrate the efficiency of our proposed communications middleware architecture.« less

  10. van der Waals Layered Materials: Opportunities and Challenges.

    PubMed

    Duong, Dinh Loc; Yun, Seok Joon; Lee, Young Hee

    2017-12-26

    Since graphene became available by a scotch tape technique, a vast class of two-dimensional (2D) van der Waals (vdW) layered materials has been researched intensively. What is more intriguing is that the well-known physics and chemistry of three-dimensional (3D) bulk materials are often irrelevant, revealing exotic phenomena in 2D vdW materials. By further constructing heterostructures of these materials in the planar and vertical directions, which can be easily achieved via simple exfoliation techniques, numerous quantum mechanical devices have been demonstrated for fundamental research and technological applications. It is, therefore, necessary to review the special features in 2D vdW materials and to discuss the remaining issues and challenges. Here, we review the vdW materials library, technology relevance, and specialties of vdW materials covering the vdW interaction, strong Coulomb interaction, layer dependence, dielectric screening engineering, work function modulation, phase engineering, heterostructures, stability, growth issues, and the remaining challenges.

  11. A semi-floating gate memory based on van der Waals heterostructures for quasi-non-volatile applications

    NASA Astrophysics Data System (ADS)

    Liu, Chunsen; Yan, Xiao; Song, Xiongfei; Ding, Shijin; Zhang, David Wei; Zhou, Peng

    2018-05-01

    As conventional circuits based on field-effect transistors are approaching their physical limits due to quantum phenomena, semi-floating gate transistors have emerged as an alternative ultrafast and silicon-compatible technology. Here, we show a quasi-non-volatile memory featuring a semi-floating gate architecture with band-engineered van der Waals heterostructures. This two-dimensional semi-floating gate memory demonstrates 156 times longer refresh time with respect to that of dynamic random access memory and ultrahigh-speed writing operations on nanosecond timescales. The semi-floating gate architecture greatly enhances the writing operation performance and is approximately 106 times faster than other memories based on two-dimensional materials. The demonstrated characteristics suggest that the quasi-non-volatile memory has the potential to bridge the gap between volatile and non-volatile memory technologies and decrease the power consumption required for frequent refresh operations, enabling a high-speed and low-power random access memory.

  12. A three-dimensional architecture of vertically aligned multilayer graphene facilitates heat dissipation across joint solid surfaces

    NASA Astrophysics Data System (ADS)

    Liang, Qizhen; Yao, Xuxia; Wang, Wei; Wong, C. P.

    2012-02-01

    Low operation temperature and efficient heat dissipation are important for device life and speed in current electronic and photonic technologies. Being ultra-high thermally conductive, graphene is a promising material candidate for heat dissipation improvement in devices. In the application, graphene is expected to be vertically stacked between contact solid surfaces in order to facilitate efficient heat dissipation and reduced interfacial thermal resistance across contact solid surfaces. However, as an ultra-thin membrane-like material, graphene is susceptible to Van der Waals forces and usually tends to be recumbent on substrates. Thereby, direct growth of vertically aligned free-standing graphene on solid substrates in large scale is difficult and rarely available in current studies, bringing significant barriers in graphene's application as thermal conductive media between joint solid surfaces. In this work, a three-dimensional vertically aligned multi-layer graphene architecture is constructed between contacted Silicon/Silicon surfaces with pure Indium as a metallic medium. Significantly higher equivalent thermal conductivity and lower contact thermal resistance of vertically aligned multilayer graphene are obtained, compared with those of their recumbent counterpart. This finding provides knowledge of vertically aligned graphene architectures, which may not only facilitate current demanding thermal management but also promote graphene's widespread applications such as electrodes for energy storage devices, polymeric anisotropic conductive adhesives, etc.

  13. REVIEW: Restoring standing capabilities with feedback control of functional neuromuscular stimulation following spinal cord injury

    PubMed Central

    Nataraj, Raviraj; Audu, Musa L.; Triolo, Ronald J.

    2017-01-01

    This paper reviews the field of feedback control for neuroprosthesis systems that restore advanced standing function to individuals with spinal cord injury. Investigations into closed-loop control of standing by functional neuromuscular stimulation (FNS) have spanned three decades. The ultimate goal for FNS standing control systems is to facilitate hands free standing and enabling the user to perform manual functions at self-selected leaning positions. However, most clinical systems for home usage currently only provide basic upright standing using preprogrammed stimulation patterns. To date, online modulation of stimulation to produce advanced standing functions such as balance against postural disturbances or the ability to assume leaning postures have been limited to simulation and laboratory investigations. While great technological advances have been made in biomechanical sensing and interfaces for neuromuscular stimulation, further progress is still required for finer motor control by FNS. Another major challenge is the development of sophisticated control schemes that produce the necessary postural adjustments, adapt against accelerating muscle fatigue, and consider volitional actions of the intact upper-body of the user. Model-based development for novel control schemes are proven and sensible approaches to prototype and test the basic operating efficacy of potentially complex and multi-faceted control systems. The major considerations for further innovation of such systems are summarized in this paper prior to describing the evolution of closed-loop FNS control of standing from previous works. Finally, necessary emerging technologies to for implementing FNS feedback control systems for standing are identified. These technological advancements include novel electrodes that more completely and selectively activate paralyzed musculature and implantable sensors and stimulation modules for flexible neuroprosthesis system deployment. PMID:28215399

  14. Restoring standing capabilities with feedback control of functional neuromuscular stimulation following spinal cord injury.

    PubMed

    Nataraj, Raviraj; Audu, Musa L; Triolo, Ronald J

    2017-04-01

    This paper reviews the field of feedback control for neuroprosthesis systems that restore advanced standing function to individuals with spinal cord injury. Investigations into closed-loop control of standing by functional neuromuscular stimulation (FNS) have spanned three decades. The ultimate goal for FNS standing control systems is to facilitate hands free standing and enabling the user to perform manual functions at self-selected leaning positions. However, most clinical systems for home usage currently only provide basic upright standing using preprogrammed stimulation patterns. To date, online modulation of stimulation to produce advanced standing functions such as balance against postural disturbances or the ability to assume leaning postures have been limited to simulation and laboratory investigations. While great technological advances have been made in biomechanical sensing and interfaces for neuromuscular stimulation, further progress is still required for finer motor control by FNS. Another major challenge is the development of sophisticated control schemes that produce the necessary postural adjustments, adapt against accelerating muscle fatigue, and consider volitional actions of the intact upper-body of the user. Model-based development for novel control schemes are proven and sensible approaches to prototype and test the basic operating efficacy of potentially complex and multi-faceted control systems. The major considerations for further innovation of such systems are summarized in this paper prior to describing the evolution of closed-loop FNS control of standing from previous works. Finally, necessary emerging technologies to for implementing FNS feedback control systems for standing are identified. These technological advancements include novel electrodes that more completely and selectively activate paralyzed musculature and implantable sensors and stimulation modules for flexible neuroprosthesis system deployment. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

  15. Photographic copy of site plan for proposed Test Stand "D" ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Photographic copy of site plan for proposed Test Stand "D" in 1958. The contemporary site plans of test stands "A," "B," and "C" are also visible, along with the interconnecting tunnel system. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering "Site Plan for Proposed Test Stand "D" - Edwards Test Station," drawing no. ESP/22-0, 14 November 1958 - Jet Propulsion Laboratory Edwards Facility, Test Stand D, Edwards Air Force Base, Boron, Kern County, CA

  16. AmeriFlux US-NMj Northern Michigan Jack Pine Stand

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Jiquan

    This is the AmeriFlux version of the carbon flux data for the site US-NMj Northern Michigan Jack Pine Stand. Site Description - The jack pine site is owned by Michigan Technological University. The stand is managed, and thus thinned and harvested depending on stand age. This jack pine site is naturally regenerating following a clearcut around 1989. Heavy snow in December 2001 c

  17. Carbon footprint of forest and tree utilization technologies in life cycle approach

    NASA Astrophysics Data System (ADS)

    Polgár, András; Pécsinger, Judit

    2017-04-01

    In our research project a suitable method has been developed related the technological aspect of the environmental assessment of land use changes caused by climate change. We have prepared an eco-balance (environmental inventory) to the environmental effects classification in life-cycle approach in connection with the typical agricultural / forest and tree utilization technologies. The use of balances and environmental classification makes possible to compare land-use technologies and their environmental effects per common functional unit. In order to test our environmental analysis model, we carried out surveys in sample of forest stands. We set up an eco-balance of the working systems of intermediate cutting and final harvest in the stands of beech, oak, spruce, acacia, poplar and short rotation energy plantations (willow, poplar). We set up the life-cycle plan of the surveyed working systems by using the GaBi 6.0 Professional software and carried out midpoint and endpoint impact assessment. Out of the results, we applied the values of CML 2001 - Global Warming Potential (GWP 100 years) [kg CO2-Equiv.] and Eco-Indicator 99 - Human health, Climate Change [DALY]. On the basis of the values we set up a ranking of technology. By this, we received the environmental impact classification of the technologies based on carbon footprint. The working systems had the greatest impact on global warming (GWP 100 years) throughout their whole life cycle. This is explained by the amount of carbon dioxide releasing to the atmosphere resulting from the fuel of the technologies. Abiotic depletion (ADP foss) and marine aquatic ecotoxicity (MAETP) emerged also as significant impact categories. These impact categories can be explained by the share of input of fuel and lube. On the basis of the most significant environmental impact category (carbon footprint), we perform the relative life cycle contribution and ranking of each technologies. The technological life cycle stages examined in the stands are the followings: Stage 1. cleaning cutting Stage 2. selection thinning Stage 3. increment thinning Stage 4. final harvest In these priority impact categories, the life cycle contribution of technologies varied according to the life cycle stages. • The spruce stand showed the smallest contribution in the stages 1, 2, 3 alike. • After the large contribution of beech stand at the beginning (stage 1), it continues representing a moderate level in stage 2 and 3, and it shares the smallest rate in final harvest (stage 4). • The oak stand showed the largest contribution in the stages 2, 3, 4 alike. • In the case of acacia and poplar, we have got the same results as in the case of oak stands. • In the case of short rotation energy plantations (willow, poplar), we got the results typical on stage 4 of spruce stands. We can conclude, that in case of the stage of final harvest, which represents the most significant environmental impact, the ranking of working systems showes the increasing order of „energy plantations - beech - spruce - acacia - poplar - oak". The environmental assessment of technological aspects of land use and land use change represent an important added value to the climate research. Acknowledgement: This research has been supported by the Agroclimate.2 VKSZ_12-1- 2013-0034 project. Keywords: life-cycle assessment / forest utilization technology / carbon footprint / life-cycle thinking

  18. Recent progress in the assembly of nanodevices and van der Waals heterostructures by deterministic placement of 2D materials.

    PubMed

    Frisenda, Riccardo; Navarro-Moratalla, Efrén; Gant, Patricia; Pérez De Lara, David; Jarillo-Herrero, Pablo; Gorbachev, Roman V; Castellanos-Gomez, Andres

    2018-01-02

    Designer heterostructures can now be assembled layer-by-layer with unmatched precision thanks to the recently developed deterministic placement methods to transfer two-dimensional (2D) materials. This possibility constitutes the birth of a very active research field on the so-called van der Waals heterostructures. Moreover, these deterministic placement methods also open the door to fabricate complex devices, which would be otherwise very difficult to achieve by conventional bottom-up nanofabrication approaches, and to fabricate fully-encapsulated devices with exquisite electronic properties. The integration of 2D materials with existing technologies such as photonic and superconducting waveguides and fiber optics is another exciting possibility. Here, we review the state-of-the-art of the deterministic placement methods, describing and comparing the different alternative methods available in the literature, and we illustrate their potential to fabricate van der Waals heterostructures, to integrate 2D materials into complex devices and to fabricate artificial bilayer structures where the layers present a user-defined rotational twisting angle.

  19. Major Naval Operations

    DTIC Science & Technology

    2008-09-01

    ing craft, while four combat craft (two tor- pedo craft and two light patrol craft) were captured in Port of Adabia. 5. Hartmut Zehrer, ed., Der...Collaborative planning is made possible by information technologies that allow the real-time exchange of information by voice and video . It greatly

  20. Fluid Dynamics Panel Working Group 12 on Adaptive Wind Tunnel Walls: Technology and Applications (Les Souffleries a Paroi Adaptable Technologies et Applications)

    DTIC Science & Technology

    1990-04-01

    mensional Wall Adaptation. Dissertation, Universite Libre de Bruxelles, 1986. [4.22] Prandtl, L.: Experimentelle Prufung der [4.12] AshilI , P.R., Weeks...TR 86026 U, Feb.1986. May 1988. [6.29] Archambaud, J.P. and Chevallier, J.P., "Utilisation [6.91 AshilI , P.R. and Weeks, D.J., "A Method for Deter- de

  1. Towards Direct Simulations of Counterflow Flames with Consistent Differential-Algebraic Boundary Conditions

    DTIC Science & Technology

    2015-01-05

    Mechanical and Civil Engineering Dept., California Institute of Technology, Pasadena, CA 91125, USA Josette Bellan † Jet Propulsion Laboratory...91125, USA Kenneth Harstad ‡ Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109, USA A new approach for the formulation of...BDF (Backward Differentiation Formula ), in fixed-leading-coefficient form where the or- der of the method varies between 1 and 5. The BDF method can

  2. "It Just Takes so Much Time!" A Study of Teachers' Use of ICT to Convey Relevance of Mathematical Content

    ERIC Educational Resources Information Center

    Prieto-Rodriguez, Elena

    2016-01-01

    This paper reports on a component of a study which aims to determine how ICT, and in particular some of the technology funded as part of Australian government's DER (Digital Education Revolution) program, is used by teachers in the state of New South Wales. The study looks in particular at whether technology is used to incorporate real-world…

  3. 13. Photographic copy of site plan displaying Test Stand 'C' ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. Photographic copy of site plan displaying Test Stand 'C' (4217/E-18), Test Stand 'D' (4223/E-24), and Control and Recording Center (4221/E-22) with ancillary structures, and connecting roads and services. California Institute of Technology, Jet Propulsion Laboratory, Facilities Engineering and Construction Office 'Repairs to Test Stand 'C,' Edwards Test Station, Legend & Site Plan M-1,' drawing no. ESP/115, August 14, 1987. - Jet Propulsion Laboratory Edwards Facility, Test Stand C, Edwards Air Force Base, Boron, Kern County, CA

  4. AORN Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings.

    PubMed

    Hughes, Nancy L; Nelson, Audrey; Matz, Mary W; Lloyd, John

    2011-06-01

    Prolonged standing during surgical procedures poses a high risk of causing musculoskeletal disorders, including back, leg, and foot pain, which can be chronic or acute in nature. Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings provides recommendations for relieving the strain of prolonged standing, including the use of antifatigue mats, supportive footwear, and sit/stand stools, that are based on well-accepted ergonomic safety concepts, current research, and access to new and emerging technology. Published by Elsevier Inc.

  5. Post-Secondary Transfers. ACCC Submission to the Standing Senate Committee on Social Affairs, Science and Technology

    ERIC Educational Resources Information Center

    Association of Canadian Community Colleges, 2010

    2010-01-01

    This report provides the recommendations made by the Association of Canadian Community Colleges (ACCC) to the Standing Senate Committee on Social Affairs, Science and Technology based from its examination on the accessibility of post-secondary education in Canada. Aligned with the needs of employers, and operating on the leading edge of advanced…

  6. Impact of alternative harvesting technologies on thinning entry and optimal rotation age for eastern hardwoods

    Treesearch

    Chris B. LeDoux

    2007-01-01

    A complete system simulation model is used to integrate alternative logging technologies, stand data, market prices, transportation costs, and economic concerns in a longterm continuous manner to evaluate thinning entry timing and optimal rotation age. Forest Inventory and Analysis (FIA) stand data for the oak/hickory forest type and time and motion study data for 70,...

  7. Gebändigtes Knallgas: Brennstoffzellen im mobilen und stationären Einsatz

    NASA Astrophysics Data System (ADS)

    Waidhas, Manfred; Landes, Harald

    2001-07-01

    Die Brennstoffzelle hat aus technischer Sicht einen hohen Stand erreicht. Die PEMFC konnte ihre Zuverlässigkeit in einer Reihe von Nischenanwendungen, aber auch in Form erster mobiler und dezentraler Prototypen beweisen. Die SOFC und die MCFC konnten bereits in Anlagen von 100 kW und mehr in Erprobung gehen. Um jedoch wirtschaftlich konkur-renzfähig zu den etablierten Technologien der mobilen und dezentralen Energiewandlung zu werden, muss noch eine drastische Kostenreduktion sowohl beim Brennstoffzellen-Stack als auch bei den zu seinem Betrieb notwendigen Hilfsaggregaten erreicht werden. Für Fahrzeugantriebe muss außerdem eine Antwort auf die noch offene Treibstofffrage (Infrastruktur, H2-Erzeugung und H2-Speicherung) gefunden werden.

  8. Of texts and contexts: reflections upon the publication of The Jung-White Letters.

    PubMed

    Stein, Murray

    2007-06-01

    In addition to his many other personae, Jung was a writer and an author, which means a creator, whose written works underlie and authorize a field of thought and clinical work, i.e., analytical psychology. Not widely recognized is that many of his authored texts were stimulated by important and intense personal relationships. Freud and Victor White loom large, the first standing behind major early analytical texts like Wandlungen und Symbole der Libido and Psychological Types, the second behind later texts on culture, religion, and Christian theology. The publication of The Jung-White Letters reveals the significance of his relationship with Victor White for the authoring of Answer to Job.

  9. Zum Problem der Hochschulreform in Spanien: Einige ausgewahlte Daten.

    ERIC Educational Resources Information Center

    Val, Jose Cajide; Philipp, Rita Radl; Castro, Ana Porto

    1998-01-01

    Investigates the teaching, research, and management entailed in four new degree programs--physics, agricultural engineering, agricultural food-processing technology, and pharmacy courses--at Spain's University of Santiago de Compostela. Reports students' opinions of reforms in these courses, revealing dissatisfaction with facilities for practical…

  10. Status and Needs of Power Electronics for Photovoltaic Inverters: Summary Document

    NASA Astrophysics Data System (ADS)

    West, R.; Mauch, K.; Qin, Y. C.; Mohan, N.; Bonn, R.

    2002-05-01

    Photovoltaic inverters are the most mature of any DER inverter, and their mean time to first failure (MTFF) is about five years. This is an unacceptable MTFF and will inhibit the rapid expansion of PV. With all DER technologies, (solar, wind, fuel cells, and microturbines) the inverter is still an immature product that will result in reliability problems in fielded systems. The increasing need for all of these technologies to have a reliable inverter provides a unique opportunity to address these needs with focused R&D development projects. The requirements for these inverters are so similar that modular designs with universal features are obviously the best solution for a 'next generation' inverter. A 'next generation' inverter will have improved performance, higher reliability, and improved profitability. Sandia National Laboratories has estimated that the development of a 'next generation' inverter could require approximately 20 man-years of work over an 18- to 24-month time frame, and that a government-industry partnership will greatly improve the chances of success.

  11. Economic impact of V2G technology in a smart microgrid

    NASA Astrophysics Data System (ADS)

    Anastasiadis, Anestis G.; Polyzakis, Apostolos; Vokas, Georgios A.

    2018-05-01

    With serious concerns on global warming and energy crisis, there are plenty of motivations for developing and commercializing plug-in Electric Vehicles (EVs). It is believed that substitution of EVs for conventional fuel vehicles can help reduce the greenhouse gases emission, increase the energy efficiency, enhance the integration of renewable energy, and so forth. These advantages originate from the double role of the electrical vehicle's battery. Thus, it may constitute firstly a controllable load that we are able to optimally control at convenient time frames and secondly, it may store and inject energy, acting as a storage device. Nowadays, a number of EVs use power grids around the world to charge and discharge their batteries. Smart Microgrids (SMs) seem to be the best solution for the management of modern Low Voltage (LV) grids with Distributed Energy Resources (DER) and EVs. Among these technologies, EVs pose both a risk by increasing the peak load as well as an opportunity for the existing energy management systems by charging and discharging electricity with the help of Vehicle-to-Grid (V2G) technology. The key to the implementation of V2G is how to effectively integrate information into energy conversion, transmission and distribution. V2G should be carried out within the framework of SM, so that the status information of power grid can be perceived. In this paper, a Low Voltage (LV) SM derived from an interconnection bus is considered which is characterized by the presence of DERs units and EVs. Firstly, an overview of plug in EV technologies is examined and then the main purpose of the paper is to investigate the effects of V2G charging and discharging strategies in a SM. With EVs and absence of DERs is considered as the base case. For each scenario, two different charging technologies are examined (Dump Charging and V2G) in terms of operational cost. All data are taken from Hellenic Distribution/Transmission System Operators and Hellenic Operator of Electricity Market. Matlab software is used for all cases of studies.

  12. Key Drivers of Marines Willingness to Adopt Energy-Efficient Technologies

    DTIC Science & Technology

    2013-12-01

    influences the rate of adoption. Communication is “the process by which participants create and share information with one another in order to reach a...more likely to assess the value of the innovation themselves rather than the value of the implementer’s market . Kleijnen, Lee, and Wetzels (2009...willingness to ucc (~pt energy cftid(’nt technologil~. The adaptation of energy efficient technologies will significantly reduce fossil fuel der>endency

  13. Colleges, Institutes and Communities: Partners in Rural Sustainability. ACCC Submission to the Standing Senate Committee on Social Affairs, Science and Technology

    ERIC Educational Resources Information Center

    Association of Canadian Community Colleges, 2010

    2010-01-01

    This report provides the recommendations made by the Association of Canadian Community Colleges (ACCC) to the Standing Senate Committee on Social Affairs, Science and Technology based from its examination on the accessibility of post-secondary education in Canada. Colleges are the advanced skills educators of choice. Aligned with the needs of…

  14. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Poore, WP

    The vision of the Distributed Energy Research Program (DER) program of the U.S. Department of Energy (DOE) is that the United States will have the cleanest and most efficient and reliable energy system in the world by maximizing the use of affordable distributed energy resources. Electricity consumers will be able to choose from a diverse number of efficient, cost-effective, and environmentally friendly distributed energy options and easily connect them into the nation's energy infrastructure while providing benefits to their owners and other stakeholders. The long-term goal of this vision is that DER will achieve a 20% share of new electricmore » capacity additions in the United States by 2010, thereby helping to make the nation's electric power generation and delivery system more efficient, reliable, secure, clean, economical, and diverse in terms of fuel use (oil, natural gas, solar, hydroelectric, etc.) and prime mover resource (solar, wind, gas turbines, etc.). Near- and mid-term goals are to develop new technologies for implementing and operating DER and address barriers associated with DER usage and then to reduce costs and emissions and improve the efficiency and reliability of DER. Numerous strategies for meeting these goals have been developed into a research, development, and demonstration (RD&D) program that supports generation and delivery systems architecture, including modeling and simulation tools. The benefits associated with DER installations are often significant and numerous. They almost always provide tangible economic benefits, such as energy savings or transmission and distribution upgrade deferrals, as well as intangible benefits, such as power quality improvements that lengthen maintenance or repair intervals for power equipment. Also, the benefits routinely are dispersed among end users, utilities, and the public. For instance, an end user may use the DER to reduce their peak demand and save money due to lower demand charges. Reduced end user peak demand, in turn, may lower a distribution system peak load such that upgrades are deferred or avoided. This could benefit other consumers by providing them with higher reliability and power quality as well as avoiding their cost share of a distribution system upgrade. In this example, the costs of the DER may be born by the end user, but that user reaps only a share of the benefits. This report, the first product of a study to quantify the value of DER, documents initial project efforts to develop an assessment methodology. The focus of currently available site-specific DER assessment techniques are typically limited to two parties, the owner/user and the local utility. Rarely are the impacts on other stakeholders, including interconnected distribution utilities, transmission system operators, generating system operators, other local utility customers, local and regional industry and business, various levels of government, and the environment considered. The goal of this assessment is to quantify benefits and cost savings that accrue broadly across a region, recognizing that DER installations may have local, regional, or national benefits.« less

  15. 1. Photographic copy of engineering drawing showing elevations and sections ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of engineering drawing showing elevations and sections of Test Stand 'E' (Building 4259/E-60). California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Solid Propellant Test Stand E-60 - Elevations & Sections,' sheet E60/10, no date. - Jet Propulsion Laboratory Edwards Facility, Test Stand E, Edwards Air Force Base, Boron, Kern County, CA

  16. Evaluation der zentralen TUM-Lernplattform

    NASA Astrophysics Data System (ADS)

    Schulze, Elvira; Baume, Matthias; Graf, Stephan; Gergintchev, Ivan

    Die Notwendigkeit der Qualitätssicherung und -kontrolle für innovative universitäre Lehr-/Lernszenarien ist in der Praxis unbestritten. Die Wirksamkeit der Einführung der zentralen Lernplattform CLIX Campus der imc AG an der TUM wurde mittels quantitativer und qualitativer Evaluation überprüft. Als statistische Bewertungsgrundlage wurde der Erreichungsgrad bestimmter Projektziele herangezogen. Aufbauend auf den theoretischen Grundlagen der Evaluation von Bildungsangeboten gibt diese Studie Aufschluss über die Ergebnisse der Datenerhebungen sowie die Einschätzung der Plattform aus Nutzersicht und belegt die wesentliche Bedeutung der durchgängigen IT-Infrastruktur und speziell der einheitlichen Verfügbarkeit der eLearning Angebote.

  17. Stereospecific olefin polymerization catalysts

    DOEpatents

    Bercaw, John E.; Herzog, Timothy A.

    1998-01-01

    A metallocene catalyst system for the polymerization of .alpha.-olefins to yield stereospecific polymers including syndiotactic, and isotactic polymers. The catalyst system includes a metal and a ligand of the formula ##STR1## wherein: R.sup.1, R.sup.2, and R.sup.3 are independently selected from the group consisting of hydrogen, C.sub.1 to C.sub.10 alkyl, 5 to 7 membered cycloalkyl, which in turn may have from 1 to 3 C.sub.1 to C.sub.10 alkyls as a substituent, C.sub.6 to C.sub.15 aryl or arylalkyl in which two adjacent radicals may together stand for cyclic groups having 4 to 15 carbon atoms which in turn may be substituted, or Si(R.sup.8).sub.3 where R.sup.8 is selected from the group consisting of C.sub.1 to C.sub.10 alkyl, C.sub.6 to C.sub.15 aryl or C.sub.3 to C.sub.10 cycloalkyl; R.sup.4 and R.sup.6 are substituents both having van der Waals radii larger than the van der Waals radii of groups R.sup.1 and R.sup.3 ; R.sup.5 is a substituent having a van der Waals radius less than about the van der Waals radius of a methyl group; E.sup.1, E.sup.2 are independently selected from the group consisting of Si(R.sup.9).sub.2, Si(R.sup.9).sub.2 --Si(R.sup.9).sub.2, Ge(R.sup.9).sub.2, Sn(R.sup.9).sub.2, C(R.sup.9).sub.2, C(R.sup.9).sub.2 --C(R.sup.9).sub.2, where R.sup.9 is C.sub.1 to C.sub.10 alkyl, C.sub.6 to C.sub.15 aryl or C.sub.3 to C.sub.10 cycloalkyl; and the ligand may have C.sub.S or C.sub.1 -symmetry. Preferred metals are selected from the group consisting of group III, group IV, group V or lanthanide group elements. The catalysts are used to prepare stereoregular polymers including polypropylene from .alpha.-olefin monomers.

  18. Stereospecific olefin polymerization catalysts

    DOEpatents

    Bercaw, J.E.; Herzog, T.A.

    1998-01-13

    A metallocene catalyst system is described for the polymerization of {alpha}-olefins to yield stereospecific polymers including syndiotactic, and isotactic polymers. The catalyst system includes a metal and a ligand of the formula shown wherein: R{sup 1}, R{sup 2}, and R{sup 3} are independently selected from the group consisting of hydrogen, C{sub 1} to C{sub 10} alkyl, 5 to 7 membered cycloalkyl, which in turn may have from 1 to 3 C{sub 1} to C{sub 10} alkyls as a substituent, C{sub 6} to C{sub 15} aryl or arylalkyl in which two adjacent radicals may together stand for cyclic groups having 4 to 15 carbon atoms which in turn may be substituted, or Si(R{sup 8}){sub 3} where R{sup 8} is selected from the group consisting of C{sub 1} to C{sub 10} alkyl, C{sub 6} to C{sub 15} aryl or C{sub 3} to C{sub 10} cycloalkyl; R{sup 4} and R{sup 6} are substituents both having van der Waals radii larger than the van der Waals radii of groups R{sup 1} and R{sup 3}; R{sup 5} is a substituent having a van der Waals radius less than about the van der Waals radius of a methyl group; E{sup 1}, E{sup 2} are independently selected from the group consisting of Si(R{sup 9}){sub 2}, Si(R{sup 9}){sub 2}--Si(R{sup 9}){sub 2}, Ge(R{sup 9}){sub 2}, Sn(R{sup 9}){sub 2}, C(R{sup 9}){sub 2}, C(R{sup 9}){sub 2}--C(R{sup 9}){sub 2}, where R{sup 9} is C{sub 1} to C{sub 10} alkyl, C{sub 6} to C{sub 15} aryl or C{sub 3} to C{sub 10} cycloalkyl; and the ligand may have C{sub S} or C{sub 1}-symmetry. Preferred metals are selected from the group consisting of group III, group IV, group V or lanthanide group elements. The catalysts are used to prepare stereoregular polymers including polypropylene from {alpha}-olefin monomers.

  19. European Science Notes Information Bulletin. Reports on Current European and Middle Eastern Science

    DTIC Science & Technology

    1993-03-01

    und technology establishmcnt, we find the Bildung, BMBW) Forschungsanstalt der Bundeswehr ftr Wasser - (quoted from Meyer-Krahmer, p. 81): schall und...Scholarships has designated it to adminis- " symbolizing and strengthening the fruitful relation ter grants for study abroad and for college-level between

  20. Impact of timber production and transport costs on stand management

    Treesearch

    Chris B. LeDoux; Chris B. LeDoux

    1988-01-01

    Evaluates the impact of cable logging technology, transportation network standards, and transport vehicles on stand management. Managers can use results to understand the impact of timber production costs on eastern hardwood management.

  1. Methoden der digitalen Planung

    NASA Astrophysics Data System (ADS)

    Westkämper, Engelbert; Niemann, Jörg; Warschat, Joachim; Scheer, August-Wilhelm; Thomas, Oliver

    Die industrielle Produktion ist das Herz der verarbeitenden Industrie in Deutschland. Mit einem Beitrag von rund 500 Mrd. EUR pro Jahr erwirtschaftet das verarbeitende Gewerbe etwa ein Viertel der gesamtwirtschaftlichen Wertschöpfung in Deutschland. Gemessen am Produktionswert der Gesamtwirtschaft betrug der industrielle Anteil sogar über ein Drittel. Der Erhalt und der Ausbau der Wettbewerbsfähigkeit unter den gegebenen Rahmenbedingungen der globalen Märkte ist eine der größten Herausforderungen der deutschen Wirtschaft [5, 8]. In diesem Beitrag soll - ausgehend von einer Strategie der Ausrüster von Fabriken in einer globalen Produktion - diskutiert werden, wie mit der digitalen Fabrik Potentiale in den Planungs- und Wandlungsprozessen erschlossen werden können.

  2. 2. Photographic copy of engineering drawing showing mechanical systems in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. Photographic copy of engineering drawing showing mechanical systems in plan and sections of Test Stand 'E,' including tunnel entrance. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Bldg. E-60 Mechanical, Solid Propellant Test Stand,' sheet E60/13-4, June 20, 1961. - Jet Propulsion Laboratory Edwards Facility, Test Stand E, Edwards Air Force Base, Boron, Kern County, CA

  3. Assisting People with Multiple Disabilities Actively Correct Abnormal Standing Posture with a Nintendo Wii Balance Board through Controlling Environmental Stimulation

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chu, Chiung-Ling

    2010-01-01

    The latest researches adopted software technology turning the Nintendo Wii Balance Board into a high performance change of standing posture (CSP) detector, and assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture). This study extends Wii Balance Board…

  4. Beam-dynamic effects at the CMS BRIL van der Meer scans

    NASA Astrophysics Data System (ADS)

    Babaev, A.

    2018-03-01

    The CMS Beam Radiation Instrumentation and Luminosity Project (BRIL) is responsible for the simulation and measurement of luminosity, beam conditions and radiation fields in the CMS experiment. The project is engaged in operating and developing new detectors (luminometers), adequate for the experimental conditions associated with high values of instantaneous luminosity delivered by the CERN LHC . BRIL operates several detectors based on different physical principles and technologies. Precise and accurate measurements of the delivered luminosity is of paramount importance for the CMS physics program. The absolute calibration of luminosity is achieved by the van der Meer method, which is carried out under specially tailored conditions. This paper presents models used to simulate of beam-dynamic effects arising due to the electromagnetic interaction of colliding bunches. These effects include beam-beam deflection and dynamic-β effect. Both effects are important to luminosity measurements and influence calibration constants at the level of 1-2%. The simulations are carried out based on 2016 CMS van der Meer scan data for proton-proton collisions at a center-of-mass energy of 13 TeV.

  5. [Management of Pregnancy-Associated Venous Thromboembolism - Current Recommendations].

    PubMed

    Linnemann, Birgit

    2017-06-01

    Diagnostik in der Schwangerschaft  Studien belegen den hohen Stellenwert der Kompressionssonografie der Beinvenen plus Duplexsonografie der Beckenvenen in der Diagnostik der Becken- und Beinvenenthrombose auch bei Schwangeren. Perfusionsszintigrafie und CT-Angiografie der Pulmonalarterien sind bei vergleichbarer fötaler Strahlenbelastung gleich aussagekräftig. Aufgrund der mütterlichen Strahlenbelastung favorisieren aktuelle Leitlinien bei fehlender struktureller Lungenerkrankung die Perfusionsszintigrafie als primäre Bildgebung. Es gibt keinen Grund, einer Schwangeren mit Lungenembolieverdacht eine notwendige radiologische Diagnosesicherung vorzuenthalten. Antikoagulation in der Schwangerschaft  Heparine bleiben Antikoagulans der 1. Wahl bei der Behandlung der venöses Thromboembolien (VTE) in der Schwangerschaft. Neue orale Antikoagulantien (NOAK) sind aufgrund ihrer geringen Molekülgröße plazentagängig und daher in der Schwangerschaft kontraindiziert. Peripartales Vorgehen  Zur Minimierung des postpartalen Blutungsrisikos vor der Geburt ist in den letzten Wochen vor der Geburt eine Aufteilung der NMH-Injektion auf 2 Tagesdosen sinnvoll. Bei der Entbindung ist eine interdisziplinäre Abstimmung wichtig. Postpartal kann eine NMH-Therapie fortgesetzt oder Warfarin eingesetzt werden (Kein Phenprocoumon, da es in die Muttermilch übergeht).

  6. Integrated versus stand-alone second generation ethanol production from sugarcane bagasse and trash.

    PubMed

    Dias, Marina O S; Junqueira, Tassia L; Cavalett, Otávio; Cunha, Marcelo P; Jesus, Charles D F; Rossell, Carlos E V; Maciel Filho, Rubens; Bonomi, Antonio

    2012-01-01

    Ethanol production from lignocellulosic materials is often conceived considering independent, stand-alone production plants; in the Brazilian scenario, where part of the potential feedstock (sugarcane bagasse) for second generation ethanol production is already available at conventional first generation production plants, an integrated first and second generation production process seems to be the most obvious option. In this study stand-alone second generation ethanol production from surplus sugarcane bagasse and trash is compared with conventional first generation ethanol production from sugarcane and with integrated first and second generation; simulations were developed to represent the different technological scenarios, which provided data for economic and environmental analysis. Results show that the integrated first and second generation ethanol production process from sugarcane leads to better economic results when compared with the stand-alone plant, especially when advanced hydrolysis technologies and pentoses fermentation are included. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. The ACT transport: Panacea for the 80's or designer's illusion (panel discussion)

    NASA Technical Reports Server (NTRS)

    1976-01-01

    A panel discussion was held which attempted to make an objective and pragmatic assessment of the standing of active control technology. The discussion focused on the standing of active control technology relative to civil air transport applications, the value as opposed to the cost of the projected benefits, the need for research, development, and demonstration, the role of government and industry in developing the technology, the major obstacles to its implementation, and the probable timing of the full utilization of active control technology in commercial transportation. An edited transcription of the prepared statements of the panel members and the subsequent open discussion between the panel and the audience is presented.

  8. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mendes, Goncalo; Feng, Wei; Stadler, Michael

    The following paper conducts a regional analysis of the U.S. and Chinese buildings? potential for adopting Distributed Energy Resources (DER). The expected economics of DER in 2020-2025 is modeled for a commercial and a multi-family residential building in different climate zones. The optimal building energy economic performance is calculated using the Distributed Energy Resources Customer Adoption Model (DER CAM) which minimizes building energy costs for a typical reference year of operation. Several DER such as combined heat and power (CHP) units, photovoltaics, and battery storage are considered. The results indicate DER have economic and environmental competitiveness potential, especially for commercialmore » buildings in hot and cold climates of both countries. In the U.S., the average expected energy cost savings in commercial buildings from DER CAM?s suggested investments is 17percent, while in Chinese buildings is 12percent. The electricity tariffs structure and prices along with the cost of natural gas, represent important factors in determining adoption of DER, more so than climate. High energy pricing spark spreads lead to increased economic attractiveness of DER. The average emissions reduction in commercial buildings is 19percent in the U.S. as a result of significant investments in PV, whereas in China, it is 20percent and driven by investments in CHP. Keywords: Building Modeling and Simulation, Distributed Energy Resources (DER), Energy Efficiency, Combined Heat and Power (CHP), CO2 emissions 1. Introduction The transition from a centralized and fossil-based energy paradigm towards the decentralization of energy supply and distribution has been a major subject of research over the past two decades. Various concerns have brought the traditional model into question; namely its environmental footprint, its structural inflexibility and inefficiency, and more recently, its inability to maintain acceptable reliability of supply. Under such a troubled setting, distributed energy resources (DER) comprising of small, modular, electrical renewable or fossil-based electricity generation units placed at or near the point of energy consumption, has gained much attention as a viable alternative or addition to the current energy system. In 2010, China consumed about 30percent of its primary energy in the buildings sector, leading the country to pay great attention to DER development and its applications in buildings. During the 11th Five Year Plan (FYP), China has implemented 371 renewable energy building demonstration projects, and 210 photovoltaics (PV) building integration projects. At the end of the 12th FYP, China is targeting renewable energy to provide 10percent of total building energy, and to save 30 metric tons of CO2 equivalents (mtce) of energy with building integrated renewables. China is also planning to implement one thousand natural gas-based distributed cogeneration demonstration projects with energy utilization rates over 70percent in the 12th FYP. All these policy targets require significant DER systems development for building applications. China?s fast urbanization makes building energy efficiency a crucial economic issue; however, only limited studies have been done that examine how to design and select suitable building energy technologies in its different regions. In the U.S., buildings consumed 40percent of the total primary energy in 2010 [1] and it is estimated that about 14 billion m2 of floor space of the existing building stock will be remodeled over the next 30 years. Most building?s renovation work has been on building envelope, lighting and HVAC systems. Although interest has emerged, less attention is being paid to DER for buildings. This context has created opportunities for research, development and progressive deployment of DER, due to its potential to combine the production of power and heat (CHP) near the point of consumption and delivering multiple benefits to customers, such as cost« less

  9. The HIAD stands for Hypersonic Inflatable Aerodynamic Decelerato

    NASA Image and Video Library

    2013-05-31

    The HIAD stands for Hypersonic Inflatable Aerodynamic Decelerator, an inflatable spacecraft technology that allows payloads to survive the harsh conditions of atmospheric re-entry. This photo was taken at NASA Langley in Building 1250 when sensors were being applied.

  10. The HIAD stands for Hypersonic Inflatable Aerodynamic Decelerato

    NASA Image and Video Library

    2013-04-25

    The HIAD stands for Hypersonic Inflatable Aerodynamic Decelerator, an inflatable spacecraft technology that allows payloads to survive the harsh conditions of atmospheric re-entry. This photo was taken at NASA Langley in Building 1250 when sensors were being applied.

  11. Bildbasierte Navigation eines mobilen Roboters mittels omnidirektionaler und schwenkbarer Kamera

    NASA Astrophysics Data System (ADS)

    Nierobisch, Thomas; Hoffmann, Frank; Krettek, Johannes; Bertram, Torsten

    Dieser Beitrag präsentiert einen neuartigen Ansatz zur entkoppelten Regelung der Kamera-Blickrichtung und der Bewegung eines mobilen Roboters im Kontext der bildbasierten Navigation. Eine schwenkbare monokulare Kamera hält unabhängig von der Roboterbewegung die relevanten Merkmale für die Navigation im Sichtfeld. Die Entkopplung der Kamerablickrichtung von der eigentlichen Roboterbewegung wird durch die Projektion der Merkmale auf eine virtuelle Bildebene realisiert. In der virtuellen Bildebene hängt die Ausprägung der visuellen Merkmale für die bildbasierte Regelung nur von der Roboterposition ab und ist unabhängig gegenüber der tatsächlichen Blickrichtung der Kamera. Durch die Schwenkbarkeit der monokularen Kamera wird der Arbeitsbereich, über dem sich ein Referenzbild zur bildbasierten Regelung eignet, gegenüber einer statischen Kamera signifikant vergrößert. Dies ermöglicht die Navigation auch in texturarmen Umgebungen, die wenig verwertbare Textur- und Strukturmerkmale aufweisen.

  12. IEEE Photovoltaic Specialists Conference, 20th, Las Vegas, NV, Sept. 26-30, 1988, Conference Record. Volumes 1 & 2

    NASA Astrophysics Data System (ADS)

    Various papers on photovoltaics are presented. The general topics considered include: amorphous materials and cells; amorphous silicon-based solar cells and modules; amorphous silicon-based materials and processes; amorphous materials characterization; amorphous silicon; high-efficiency single crystal solar cells; multijunction and heterojunction cells; high-efficiency III-V cells; modeling and characterization of high-efficiency cells; LIPS flight experience; space mission requirements and technology; advanced space solar cell technology; space environmental effects and modeling; space solar cell and array technology; terrestrial systems and array technology; terrestrial utility and stand-alone applications and testing; terrestrial concentrator and storage technology; terrestrial stand-alone systems applications; terrestrial systems test and evaluation; terrestrial flatplate and concentrator technology; use of polycrystalline materials; polycrystalline II-VI compound solar cells; analysis of and fabrication procedures for compound solar cells.

  13. Hawaii Energy Sustainable Program

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rocheleau, Richard; Turn, Scott; Griffin, James

    The objective of HESP was to support the development and deployment of distributed energy resource (DER) technologies to facilitate increased penetration of renewable energy resources and reduced use of fossil fuels in Hawaii’s power grids. All deliverables, publications and other public releases have been submitted to the DOE in accordance with the award and subsequent award modifications.

  14. Component-Resolved Diagnostic Study of Dermatophagoides Pteronyssinus Major Allergen Molecules in a Southern Chinese Cohort.

    PubMed

    Zeng, G; Luo, W; Zheng, P; Wei, N; Huang, H; Sun, B; Zhao, X

    2015-01-01

    Little is known about component-resolved diagnosis (CRD) for Dermatophagoides pteronyssinus (Der p) sensitization in the Chinese population. We aimed to evaluate sensitization to Der p components in southern China. Two-hundred immunotherapy-naïve patients with asthma and/or rhinitis positive to specific IgE (sIgE) against Der p extract, along with 20 Der p-negative nonallergic healthy controls, were tested for sIgE against Der p 1, Der p 2, and Der p 10 using ImmunoCAP 100. Seventy-five were further examined with the ImmunoCAP Immuno Solid-phase Allergen Chip (ISAC). Der p 10-positive patients were also tested for sIgE against crude extracts of cockroach, moth, and shrimp. In total, 183 (91.5%) of the 200 patients were sensitized to Der p 1 and/or Der p 2. The proportion of positive results and the median level of s1gE against Der p 1 were higher in children than in adults. Der p 1 and Der p 2 correlated with Der p in sIgE levels. ImmunoCAP ISAC demonstrated 100% specificity and 84% sensitivity in detecting Der p 1, Der p 2, and Der p 10 compared with ImmunoCAP 100. Sensitization to Der p 10 correlated well with sIgE to shrimp, moths, cockroaches, Pen m 1, Bla g 7, and Ani s 3. The detection of Der p 1 and Der p 2 provided a good reflection of atopy to Der p in a Chinese cohort. Sensitization to Der p 10 may result from cross-reactivity with seafood and cockroaches in coastal southern China. ImmunoCAP ISAC may be a useful tool for CRD, with comparable performance to ImmunoCAP 100.

  15. DFT-MD simulations of shocked Xenon

    NASA Astrophysics Data System (ADS)

    Magyar, Rudolph J.; Mattsson, Thomas R.

    2009-03-01

    Xenon is not only a technologically important element used in laser technologies, jet propulsion and dental anesthesia, but it is also arguably the simplest material in which to study the metal-insulator transition at high pressure. Because of its closed shell electronic configuration, Xenon is often assumed to be chemically inert, interacting almost entirely through the van der Waals interaction, and at liquid density, is typically modeled well using Leonard-Jones potentials. However, such modeling has a limited range of validity as Xenon is known to form compounds at normal conditions and likely exhibits considerably more chemistry at higher densities when hybridization of occupied orbitals becomes significant. In this talk, we present DFT-MD simulations of shocked liquid Xenon with the goal of developing an improved equation of state. The relative importance of the van der Waals interaction compared to other Coulomb interactions is considered, and estimates of the relative accuracy of various density functionals are quantified. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  16. Das Smart Meter Gateway - Der kritische Erfolgsfaktor für die Digitalisierung der Energiewende

    NASA Astrophysics Data System (ADS)

    Abs, Paul-Vincent

    Der kritische Erfolgsfaktor der Digitalisierung in der Energiewirtschaft liegt im bevorstehenden hohen Investitionsvolumen und der Beherrschung der neuen Technik. Ein Weg zur Kostenminimierung liegt im Zusammenschluss der einzelnen Akteure, um gemeinsame Skalenvorteile zu heben. Auch bieten neue Geschäftsmodelle die Möglichkeit, zusätzliche Erlöse zu generieren.

  17. 9. Credit JPL. Photographic copy of drawing, engineering drawing showing ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. Credit JPL. Photographic copy of drawing, engineering drawing showing structure of Test Stand 'A' (Building 4202/E-3) and its relationship to the Monitor Building or blockhouse (Building 4203/E-4) when a reinforced concrete machinery room was added to the west side of Test Stand 'A' in 1955. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Electrical Layout - Muroc, Test Stand & Refrigeration Equipment Room,' drawing no. E3/7-0, April 6, 1955. - Jet Propulsion Laboratory Edwards Facility, Test Stand A, Edwards Air Force Base, Boron, Kern County, CA

  18. Rückwärtsintegration - Zu den Verhältnissen Gymnasium, Hochschule und Arbeitswelt

    NASA Astrophysics Data System (ADS)

    Schmid, Gerhard; Heppner, Winfried; Focht, Eva

    In seiner 2007 erschienen Sammlung von Vorträgen und Essays beschäftigt sich Wolfgang Frühwald, mit der Frage "Wieviel Wissen brauchen wir?“ [1] Die Kernproblematik moderner Wissenschaft und Forschung sieht der Autor, emeritierter Ordinarius für Neuere Deutsche Literaturwissenschaft und von 1992 bis 1997 Präsident der Deutschen Forschungsgemeinschaft, einerseits in der zunehmenden Spezialisierung der Wissenschaftsbereiche, andererseits in der Gefahr der Abkoppelung der Naturwissenschaften von den Geisteswissenschaften. Wiederholt plädiert er dafür, über der rasanten Entwicklung beispielsweise in der Biologie und Physik, die historische, gesellschaftliche und besonders die ethische Dimension der Forschung nicht zu übersehen und fordert eine übergeordnete Theorie der Wissenschaft, die nur im Dialog zwischen den einzelnen Fachgebieten zu entwickeln sei.

  19. National Renewable Energy Laboratory (NREL) Topic 2 Final Report: End-to-End Communication and Control System to Support Clean Energy Technologies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hudgins, Andrew P.; Carrillo, Ismael M.; Jin, Xin

    This document is the final report of a two-year development, test, and demonstration project, 'Cohesive Application of Standards- Based Connected Devices to Enable Clean Energy Technologies.' The project was part of the National Renewable Energy Laboratory's (NREL's) Integrated Network Testbed for Energy Grid Research and Technology (INTEGRATE) initiative hosted at Energy Systems Integration Facility (ESIF). This project demonstrated techniques to control distribution grid events using the coordination of traditional distribution grid devices and high-penetration renewable resources and demand response. Using standard communication protocols and semantic standards, the project examined the use cases of high/low distribution voltage, requests for volt-ampere-reactive (VAR)more » power support, and transactive energy strategies using Volttron. Open source software, written by EPRI to control distributed energy resources (DER) and demand response (DR), was used by an advanced distribution management system (ADMS) to abstract the resources reporting to a collection of capabilities rather than needing to know specific resource types. This architecture allows for scaling both horizontally and vertically. Several new technologies were developed and tested. Messages from the ADMS based on the common information model (CIM) were developed to control the DER and DR management systems. The OpenADR standard was used to help manage grid events by turning loads off and on. Volttron technology was used to simulate a homeowner choosing the price at which to enter the demand response market. Finally, the ADMS used newly developed algorithms to coordinate these resources with a capacitor bank and voltage regulator to respond to grid events.« less

  20. "Obligatory Technologies": Explaining Why People Feel Compelled to Use Certain Technologies

    ERIC Educational Resources Information Center

    Chandler, Jennifer A.

    2012-01-01

    The ideas of technological determinism and the autonomy of technology are long-standing and widespread. This article explores why the use of certain technologies is perceived to be obligatory, thus fueling the fatalism of technological determinism and undermining our sense of freedom vis-a-vis the use of technologies. Three main mechanisms that…

  1. CHONDRICHTHYES, Knorpelfische

    NASA Astrophysics Data System (ADS)

    Goldschmid, Alfred

    Die über 1.100 Arten der Knorpelfische sind nur etwa 4% aller heute lebenden Fischarten. Ihrknorpeliges Endoskelett kann zwar verkalken, wird abernie zu Knochen umgebaut. Der Schädel besteht nur aus Neurocranium und Viscerocranium, ein Dermatocranium fehlt. Knochen findet sich nur in den Plakoidschuppen der Körperdecke. Eine Schwimmblase wie bei den Knochenfischen wird nie gebildet. Mund- und Nasenöffnungen liegen ventral; der Endolymphgang bleibt zeitlebens mit der Epidermis verbunden. Der mediale Teil der Beckenflosse der Männchen dient als Kopulationsorgan (Mixopterygium, Klasper) (Abb. 208, 209B) bei der inneren Befruchtung.

  2. Crystal Structures of Mite Allergens Der f 1 and Der p 1 Reveal Differences in Surface-Exposed Residues that May Influence Antibody Binding

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chruszcz, Maksymilian; Chapman, Martin D.; Vailes, Lisa D.

    2009-12-01

    The Group 1 mite allergens, Der f 1 and Der p 1, are potent allergens excreted by Dermatophagoides farinae and Dermatophagoides pteronyssinus, respectively. The human IgE antibody responses to the Group 1 allergens show more cross-reactivity than the murine IgG antibody responses which are largely species-specific. Here, we report the crystal structure of the mature form of Der f 1, which was isolated from its natural source, and a new, high-resolution structure of mature recombinant Der p 1. Unlike Der p 1, Der f 1 is monomeric both in the crystalline state and in solution. Moreover, no metal binding ismore » observed in the structure of Der f 1, despite the fact that all amino acids involved in Ca{sup 2+} binding in Der p 1 are completely conserved in Der f 1. Although Der p 1 and Der f 1 share extensive sequence identity, comparison of the crystal structures of both allergens revealed structural features which could explain the differences in murine and human IgE antibody responses to these allergens. There are structural differences between Der f 1 and Der p 1 which are unevenly distributed on the allergens' surfaces. This uneven spatial arrangement of conserved versus altered residues could explain both the specificity and cross-reactivity of antibodies against Der f 1 and Der p 1.« less

  3. Test Protocols for Advanced Inverter Interoperability Functions – Main Document

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, Jay Dean; Gonzalez, Sigifredo; Ralph, Mark E.

    2013-11-01

    Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated onmore » grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not currently required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already apparent as some of these inverter capabilities are being incorporated in large demonstration and commercial projects. The test protocols are intended to be used to verify acceptable performance of inverters within the standard framework described in IEC TR 61850-90-7. These test protocols, as they are refined and validated over time, can become precursors for future certification test procedures for DER advanced grid support functions.« less

  4. Test Protocols for Advanced Inverter Interoperability Functions - Appendices

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, Jay Dean; Gonzalez, Sigifredo; Ralph, Mark E.

    2013-11-01

    Distributed energy resources (DER) such as photovoltaic (PV) systems, when deployed in a large scale, are capable of influencing significantly the operation of power systems. Looking to the future, stakeholders are working on standards to make it possible to manage the potentially complex interactions between DER and the power system. In 2009, the Electric Power Research Institute (EPRI), Sandia National Laboratories (SNL) with the U.S. Department of Energy (DOE), and the Solar Electric Power Association (SEPA) initiated a large industry collaborative to identify and standardize definitions for a set of DER grid support functions. While the initial effort concentrated onmore » grid-tied PV inverters and energy storage systems, the concepts have applicability to all DER. A partial product of this on-going effort is a reference definitions document (IEC TR 61850-90-7, Object models for power converters in distributed energy resources (DER) systems) that has become a basis for expansion of related International Electrotechnical Commission (IEC) standards, and is supported by US National Institute of Standards and Technology (NIST) Smart Grid Interoperability Panel (SGIP). Some industry-led organizations advancing communications protocols have also embraced this work. As standards continue to evolve, it is necessary to develop test protocols to independently verify that the inverters are properly executing the advanced functions. Interoperability is assured by establishing common definitions for the functions and a method to test compliance with operational requirements. This document describes test protocols developed by SNL to evaluate the electrical performance and operational capabilities of PV inverters and energy storage, as described in IEC TR 61850-90-7. While many of these functions are not now required by existing grid codes or may not be widely available commercially, the industry is rapidly moving in that direction. Interoperability issues are already apparent as some of these inverter capabilities are being incorporated in large demonstration and commercial projects. The test protocols are intended to be used to verify acceptable performance of inverters within the standard framework described in IEC TR 61850-90-7. These test protocols, as they are refined and validated over time, can become precursors for future certification test procedures for DER advanced grid support functions.« less

  5. Electric-field switching of two-dimensional van der Waals magnets

    NASA Astrophysics Data System (ADS)

    Jiang, Shengwei; Shan, Jie; Mak, Kin Fai

    2018-05-01

    Controlling magnetism by purely electrical means is a key challenge to better information technology1. A variety of material systems, including ferromagnetic (FM) metals2-4, FM semiconductors5, multiferroics6-8 and magnetoelectric (ME) materials9,10, have been explored for the electric-field control of magnetism. The recent discovery of two-dimensional (2D) van der Waals magnets11,12 has opened a new door for the electrical control of magnetism at the nanometre scale through a van der Waals heterostructure device platform13. Here we demonstrate the control of magnetism in bilayer CrI3, an antiferromagnetic (AFM) semiconductor in its ground state12, by the application of small gate voltages in field-effect devices and the detection of magnetization using magnetic circular dichroism (MCD) microscopy. The applied electric field creates an interlayer potential difference, which results in a large linear ME effect, whose sign depends on the interlayer AFM order. We also achieve a complete and reversible electrical switching between the interlayer AFM and FM states in the vicinity of the interlayer spin-flip transition. The effect originates from the electric-field dependence of the interlayer exchange bias.

  6. System-of-Systems Approach for Integrated Energy Systems Modeling and Simulation: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mittal, Saurabh; Ruth, Mark; Pratt, Annabelle

    Today’s electricity grid is the most complex system ever built—and the future grid is likely to be even more complex because it will incorporate distributed energy resources (DERs) such as wind, solar, and various other sources of generation and energy storage. The complexity is further augmented by the possible evolution to new retail market structures that provide incentives to owners of DERs to support the grid. To understand and test new retail market structures and technologies such as DERs, demand-response equipment, and energy management systems while providing reliable electricity to all customers, an Integrated Energy System Model (IESM) is beingmore » developed at NREL. The IESM is composed of a power flow simulator (GridLAB-D), home energy management systems implemented using GAMS/Pyomo, a market layer, and hardware-in-the-loop simulation (testing appliances such as HVAC, dishwasher, etc.). The IESM is a system-of-systems (SoS) simulator wherein the constituent systems are brought together in a virtual testbed. We will describe an SoS approach for developing a distributed simulation environment. We will elaborate on the methodology and the control mechanisms used in the co-simulation illustrated by a case study.« less

  7. Werner Heisenberg zum 100. Geburtstag: Pionier der Quantenmechanik

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2001-11-01

    Werner Heisenberg war eine der prägendsten Gestalten der Physik des 20. Jahrhunderts. Zu seinen wichtigsten Verdiensten gehören die Grundlegung der Quantenmechanik, die Formulierung der Unschärferelationen sowie die Beteiligung an der Ausarbeitung der Kopenhagener Deutung der Quantenmechanik. Darüber hinaus lieferte er Arbeiten von fundamentalem Charakter zur Theorie des Atomkerns, zur kosmischen Strahlung und zur Quantenfeldtheorie. Während des Krieges war er an den Arbeiten des Uranvereins beteiligt, der die Möglichkeit einer Entwicklung von Kernwaffen untersuchte, jedoch über Vorarbeiten zur Reaktorphysik nicht hinauskam. Wegen dieser Tätigkeit wurde er bei Kriegsende für einige Monate in England interniert. Nach seiner Rückkehr widmete er sich vor allem dem Aufbau der Physik in Deutschland, die während der NS-Zeit nahezu ihrer gesamten Substanz beraubt worden war.

  8. Electromagnetically induced grating with Rydberg atoms

    NASA Astrophysics Data System (ADS)

    Asghar, Sobia; Ziauddin, Qamar, Shahid; Qamar, Sajid

    2016-09-01

    We present a scheme to realize electromagnetically induced grating in an ensemble of strongly interacting Rydberg atoms, which act as superatoms due to the dipole blockade mechanism. The ensemble of three-level cold Rydberg-dressed (87Rb) atoms follows a cascade configuration where a strong standing-wave control field and a weak probe pulse are employed. The diffraction intensity is influenced by the strength of the probe intensity, the control field strength, and the van der Waals (vdW) interaction. It is noticed that relatively large first-order diffraction can be obtained for low-input intensity with a small vdW shift and a strong control field. The scheme can be considered as an amicable solution to realize the atomic grating at the microscopic level, which can provide background- and dark-current-free diffraction.

  9. Bereits nach Ablauf der Halbwertszeit droht der vollständige Zerfall Die britische Atomic Scientists’ Association, die Ideologie der „objektiven” Wissenschaft und die H-Bombe

    NASA Astrophysics Data System (ADS)

    Laucht, Christoph

    Präsident Harry Trumans Verlautbarung vom 31.1.1950, seine Regierung wolle die Entwicklung der Wasserstoffbombe vorantreiben, fand große Beachtung in den britischen Medien. Die illustrierte Zeitschrift Picture Post widmete der HBombe einen Artikel, der unter anderem kurze Stellungnahmen der britischen Atomwissenschaftler Eric Burhop, Kathleen Lonsdale, Harrie Massey, Rudolf Peierls und Maurice Pryce enthielt, die alle Mitglieder der Atomic Scientists' Association (ASA) waren.

  10. The Influence of a CO2 Pricing Scheme on Distributed Energy Resources in California's Commercial Buildings

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stadler, Michael; Marnay, Chris; Lai, Judy

    2010-06-01

    The Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) is working with the California Energy Commission (CEC) to determine the potential role of commercial-sector distributed energy resources (DER) with combined heat and power (CHP) in greenhouse gas emissions (GHG) reductions. Historically, relatively little attention has been paid to the potential of medium-sized commercial buildings with peak electric loads ranging from 100 kW to 5 MW. In our research, we examine how these medium-sized commercial buildings might implement DER and CHP. The buildings are able to adopt and operate various technologies, e.g., photovoltaics (PV), on-site thermal generation, heat exchangers, solar thermal collectors,more » absorption chillers, batteries and thermal storage systems. We apply the Distributed Energy Resources Customer Adoption Model (DER-CAM), which is a mixed-integer linear program (MILP) that minimizes a site?s annual energy costs and/or CO2 emissions. Using 138 representative mid-sized commercial sites in California, existing tariffs of major utilities, and expected performance data of available technologies in 2020, we find the GHG reduction potential for these buildings. We compare different policy instruments, e.g., a CO2 pricing scheme or a feed-in tariff (FiT), and show their contributions to the California Air Resources Board (CARB) goals of additional 4 GW CHP capacities and 6.7 Mt/a GHG reduction in California by 2020. By applying different price levels for CO2, we find that there is competition between fuel cells and PV/solar thermal. It is found that the PV/solar thermal adoption increases rapidly, but shows a saturation at high CO2 prices, partly due to limited space for PV and solar thermal. Additionally, we find that large office buildings are good hosts for CHP in general. However, most interesting is the fact that fossil-based CHP adoption also increases with increasing CO2 prices. We will show service territory specific results since the attractiveness of DER varies widely by climate zone and service territory.« less

  11. Einstellung und Wissen von Lehramtsstudierenden zur Evolution - ein Vergleich zwischen Deutschland und der Türkei

    NASA Astrophysics Data System (ADS)

    Graf, Dittmar; Soran, Haluk

    Es wird eine Untersuchung vorgestellt, in der Wissen und Überzeugungen von Lehramtsstudierenden aller Fächer zum Thema Evolution an zwei Universitäten in Deutschland und der Türkei erhoben worden sind. Die Befragung wurde in Dortmund und in Ankara durchgeführt. Es stellte sich heraus, dass ausgeprägte Defizite im Verständnis der Evolutionsmechanismen herrschen. Viele Studierende, insbesondere aus der Türkei, sind nicht von der Faktizität der Evolution überzeugt. Dies gilt sowohl für Studierende mit Fach Biologie als auch für Studierende mit anderen Fächern. Näher untersucht worden sind die Faktoren, die die Überzeugungen zur Evolution beeinflussen können, was ja in Anbetracht der hohen Ablehnungsrate der Evolution von besonderem Interesse ist. Das Vertrauen in die Wissenschaft spielt hierbei eine besondere Rolle: Wer der Wissenschaft vertraut, ist auch eher von der Evolution überzeugt, als diejenigen, die skeptisch gegenüber der Wissenschaft sind.

  12. Optimal Energy Management for Microgrids

    NASA Astrophysics Data System (ADS)

    Zhao, Zheng

    Microgrid is a recent novel concept in part of the development of smart grid. A microgrid is a low voltage and small scale network containing both distributed energy resources (DERs) and load demands. Clean energy is encouraged to be used in a microgrid for economic and sustainable reasons. A microgrid can have two operational modes, the stand-alone mode and grid-connected mode. In this research, a day-ahead optimal energy management for a microgrid under both operational modes is studied. The objective of the optimization model is to minimize fuel cost, improve energy utilization efficiency and reduce gas emissions by scheduling generations of DERs in each hour on the next day. Considering the dynamic performance of battery as Energy Storage System (ESS), the model is featured as a multi-objectives and multi-parametric programming constrained by dynamic programming, which is proposed to be solved by using the Advanced Dynamic Programming (ADP) method. Then, factors influencing the battery life are studied and included in the model in order to obtain an optimal usage pattern of battery and reduce the correlated cost. Moreover, since wind and solar generation is a stochastic process affected by weather changes, the proposed optimization model is performed hourly to track the weather changes. Simulation results are compared with the day-ahead energy management model. At last, conclusions are presented and future research in microgrid energy management is discussed.

  13. Assisting people with multiple disabilities actively correct abnormal standing posture with a Nintendo Wii balance board through controlling environmental stimulation.

    PubMed

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chu, Chiung-Ling

    2010-01-01

    The latest researches adopted software technology turning the Nintendo Wii Balance Board into a high performance change of standing posture (CSP) detector, and assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture). This study extends Wii Balance Board functionality for standing posture correction (i.e., actively adjust abnormal standing posture) to assessed whether two persons with multiple disabilities would be able to actively correct their standing posture by controlling their favorite stimulation on/off using a Wii Balance Board with a newly developed standing posture correcting program (SPCP). The study was performed according to an ABAB design, in which A represented baseline and B represented intervention phases. Data showed that both participants significantly increased time duration of maintaining correct standing posture (TDMCSP) to activate the control system to produce environmental stimulation during the intervention phases. Practical and developmental implications of the findings were discussed.

  14. Construction alternatives for free-standing facilities.

    PubMed

    Brown, G

    1990-01-01

    Many hospitals are exploring free-standing facilities as an option for providing more efficient imaging services. Mr. Brown discusses the pros and cons of an emerging building technology, manufactured construction, in which building and site preparation are done simultaneously. He presents the criteria managers should use to make a knowledgeable decision.

  15. Architecting New Library Frameworks

    ERIC Educational Resources Information Center

    Breeding, Marshall

    2010-01-01

    People live in an era of social, enterprise-oriented, and increasingly cloud-based technology; a dramatic shift away from stand-alone isolated silos that previously dominated. Computing systems can flourish today only when built to easily exchange data and services. An application that stands alone may provide practical functionality but may not…

  16. A crossover in anisotropic nanomechanochemistry of van der Waals crystals

    NASA Astrophysics Data System (ADS)

    Shimamura, Kohei; Misawa, Masaaki; Li, Ying; Kalia, Rajiv K.; Nakano, Aiichiro; Shimojo, Fuyuki; Vashishta, Priya

    2015-12-01

    In nanoscale mechanochemistry, mechanical forces selectively break covalent bonds to essentially control chemical reactions. An archetype is anisotropic detonation of layered energetic molecular crystals bonded by van der Waals (vdW) interactions. Here, quantum molecular dynamics simulations reveal a crossover of anisotropic nanomechanochemistry of vdW crystal. Within 10-13 s from the passage of shock front, lateral collision produces NO2 via twisting and bending of nitro-groups and the resulting inverse Jahn-Teller effect, which is mediated by strong intra-layer hydrogen bonds. Subsequently, as we transition from heterogeneous to homogeneous mechanochemical regimes around 10-12 s, shock normal to multilayers becomes more reactive, producing H2O assisted by inter-layer N-N bond formation. These time-resolved results provide much needed atomistic understanding of nanomechanochemistry that underlies a wider range of technologies.

  17. Zusammenarbeit aus Sicht eines outgesourcten Instandhalters

    NASA Astrophysics Data System (ADS)

    Grüßer, Stefan; Loeven, Heinz-Wilhelm

    Dauerhafter Unternehmenserfolg ist nur mit einer fortschrittlichen Instandhaltung zu erzielen. Durch den enormen Kostendruck infolge der Globalisierung und die Innovationssprünge auf der technischen Seite wird auch die Frage nach der modernen Organisationsform für die Instandhaltung gestellt. Eine Möglichkeit der Kostenoptimierung ist das Outsourcing von Instandhaltungsleistungen. Hierbei ist es unerlässlich, dass sich die Mitarbeiter zum Dienstleister entwickeln. In diesem Beitrag wird die Entwicklung der InfraServ Knapsack von einer internen Instandhaltungsabteilung hin zu einem Industriellen Dienstleister beschrieben und Aspekte der Zusammenarbeit mit externen Kunden aus der Sicht des outgesourcten Instandhalters geschildert. Es werden die wichtigen Entwicklungsschritte zur Dienstleistungsorientierung der früheren Eigeninstandhaltung aufgezeigt. Dieser Beitrag ist nicht als "Königsweg“ zu verstehen, er soll vielmehr anhand der Erfahrungen einer outgesourcten Eigeninstandhaltung Anregungen für die Entwicklung der eigenen Instandhaltungsorganisation liefern.

  18. 75 FR 62299 - National Cybersecurity Awareness Month, 2010

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-08

    ..., government efficiency, and national security. We stand at a transformational moment in history, when our technologically interconnected world presents both immense promise and potential risks. The same technology that... efforts to defend our Nation's information technology and communications infrastructure. We must continue...

  19. Heterologous Expression of Der Homologs in an Escherichia coli der Mutant and Their Functional Complementation

    PubMed Central

    Choi, Eunsil; Kang, Nalae; Jeon, Young; Pai, Hyun-Sook

    2016-01-01

    ABSTRACT The unique Escherichia coli GTPase Der (double Era-like GTPase), which contains tandemly repeated GTP-binding domains, has been shown to play an essential role in 50S ribosomal subunit biogenesis. The depletion of Der results in the accumulation of precursors of 50S ribosomal subunits that are structurally unstable at low Mg2+ concentrations. Der homologs are ubiquitously found in eubacteria. Conversely, very few are conserved in eukaryotes, and none is conserved in archaea. In the present study, to verify their conserved role in bacterial 50S ribosomal subunit biogenesis, we cloned Der homologs from two gammaproteobacteria, Klebsiella pneumoniae and Salmonella enterica serovar Typhimurium; two pathogenic bacteria, Staphylococcus aureus and Neisseria gonorrhoeae; and the extremophile Deinococcus radiodurans and then evaluated whether they could functionally complement the E. coli der-null phenotype. Only K. pneumoniae and S. Typhimurium Der proteins enabled the E. coli der-null strain to grow under nonpermissive conditions. Sucrose density gradient experiments revealed that the expression of K. pneumoniae and S. Typhimurium Der proteins rescued the structural instability of 50S ribosomal subunits, which was caused by E. coli Der depletion. To determine what allows their complementation, we constructed Der chimeras. We found that only Der chimeras harboring both the linker and long C-terminal regions could reverse the growth defects of the der-null strain. Our findings suggest that ubiquitously conserved essential GTPase Der is involved in 50S ribosomal subunit biosynthesis in various bacteria and that the linker and C-terminal regions may participate in species-specific recognition or interaction with the 50S ribosomal subunit. IMPORTANCE In Escherichia coli, Der (double Era-like GTPase) is an essential GTPase that is important for the production of mature 50S ribosomal subunits. However, to date, its precise role in ribosome biogenesis has not been clarified. In this study, we used five Der homologs from gammaproteobacteria, pathogenic bacteria, and an extremophile to elucidate their conserved function in 50S ribosomal subunit biogenesis. Among them, Klebsiella pneumoniae and Salmonella enterica serovar Typhimurium Der homologs implicated the participation of Der in ribosome assembly in E. coli. Our results show that the linker and C-terminal regions of Der homologs are correlated with its functional complementation in E. coli der mutants, suggesting that they are involved in species-specific recognition or interaction with 50S ribosomal subunits. PMID:27297882

  20. Test/QA plan for the verification testing of selective catalytic reduction control technologies for highway, nonroad use heavy-duty diesel engines

    EPA Science Inventory

    This ETV test/QA plan for heavy-duty diesel engine testing at the Southwest Research Institute’s Department of Emissions Research (DER) describes how the Federal Test Procedure (FTP), as listed in 40 CFR Part 86 for highway engines and 40 CFR Part 89 for nonroad engines, will be ...

  1. Ultrafast interlayer photocarrier transfer in graphene-MoSe2 van derWaals heterostructure

    NASA Astrophysics Data System (ADS)

    Zhang, Xin-Wu; He, Da-Wei; He, Jia-Qi; Zhao, Si-Qi; Hao, Sheng-Cai; Wang, Yong-Sheng; Yi, Li-Xin

    2017-08-01

    Not Available Project supported by the National Natural Science Foundation of China (Grant Nos. 61275058, 61527817, 61335006, and 61378073), the National Science Foundation, China (Grant No. DMR-1505852), the National Basic Research Program of China (Grant Nos. 2016YFA0202300 and 2016YFA0202302), and Beijing Science and Technology Committee, China (Grant No. Z151100003315006).

  2. Hardware-in-the-Loop Simulation of a Distribution System with Air Conditioners under Model Predictive Control: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sparn, Bethany F; Ruth, Mark F; Krishnamurthy, Dheepak

    Many have proposed that responsive load provided by distributed energy resources (DERs) and demand response (DR) are an option to provide flexibility to the grid and especially to distribution feeders. However, because responsive load involves a complex interplay between tariffs and DER and DR technologies, it is challenging to test and evaluate options without negatively impacting customers. This paper describes a hardware-in-the-loop (HIL) simulation system that has been developed to reduce the cost of evaluating the impact of advanced controllers (e.g., model predictive controllers) and technologies (e.g., responsive appliances). The HIL simulation system combines large-scale software simulation with a smallmore » set of representative building equipment hardware. It is used to perform HIL simulation of a distribution feeder and the loads on it under various tariff structures. In the reported HIL simulation, loads include many simulated air conditioners and one physical air conditioner. Independent model predictive controllers manage operations of all air conditioners under a time-of-use tariff. Results from this HIL simulation and a discussion of future development work of the system are presented.« less

  3. Structure-based design and screening of inhibitors for an essential bacterial GTPase, Der.

    PubMed

    Hwang, Jihwan; Tseitin, Vladimir; Ramnarayan, Kal; Shenderovich, Mark D; Inouye, Masayori

    2012-05-01

    Der is an essential and widely conserved GTPase that assists assembly of a large ribosomal subunit in bacteria. Der associates specifically with the 50S subunit in a GTP-dependent manner and the cells depleted of Der accumulate the structurally unstable 50S subunit, which dissociates into an aberrant subunit at a lower Mg(2+) concentration. As Der is an essential and ubiquitous protein in bacteria, it may prove to be an ideal cellular target against which new antibiotics can be developed. In the present study, we describe our attempts to identify novel antibiotics specifically targeting Der GTPase. We performed the structure-based design of Der inhibitors using the X-ray crystal structure of Thermotoga maritima Der (TmDer). Virtual screening of commercially available chemical library retrieved 257 small molecules that potentially inhibit Der GTPase activity. These 257 chemicals were tested for their in vitro effects on TmDer GTPase and in vivo antibacterial activities. We identified three structurally diverse compounds, SBI-34462, -34566 and -34612, that are both biologically active against bacterial cells and putative enzymatic inhibitors of Der GTPase homologs. We also presented the possible interactions of each compound with the Der GTP-binding site to understand the mechanism of inhibition. Therefore, our lead compounds inhibiting Der GTPase provide scaffolds for the development of novel antibiotics against antibiotic-resistant pathogenic bacteria.

  4. Kants Theorie der Sonne: Physikgeschichte

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2005-01-01

    Im Rahmen seiner Kosmogonie entwickelte der junge Immanuel Kant eine Theorie der Sonne. Sie ist ein einzigartiges Zeugnis seiner intuitiven Vorstellungskraft und beweist auch die Leistungsfähigkeit der damaligen, vorwiegend von Newton geprägten Weltsicht. Entstehung, Aufbau und Dynamik der Sonne werden in Kants Theorie ebenso erklärt wie etwa das Phänomen der Sonnenflecken.

  5. Funkmesstechnik

    NASA Astrophysics Data System (ADS)

    Plaßmann, Wilfried

    Ein Hauptgebiet der Funkmesstechnik ist durch den Begriff RADAR (radio detection and ranging gekennzeichnet. Bei diesem Verfahren werden impulsförmige elektromagnetische Wellen von einer Antenne ausgesendet und an Körpern oder Stoffverteilungen (Wolken) reflektiert. Die Sendeantenne wird auf Empfang umgeschaltet, und anhand des Echos sind Rückschlüsse auf die Lage und die Beschaffenheit der Körper oder der Stoffverteilungen möglich. Angewendet wird die Radartechnik bei der Kontrolle und der Sicherung des Land-, Wasser- und Flugverkehrs, in der Meteorologie zur Wetterprognose, in der Astrologie und im militärischen Bereich.

  6. Breaking Barriers to Low-Cost Modular Inverter Production & Use

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bogdan Borowy; Leo Casey; Jerry Foshage

    2005-05-31

    The goal of this cost share contract is to advance key technologies to reduce size, weight and cost while enhancing performance and reliability of Modular Inverter Product for Distributed Energy Resources (DER). Efforts address technology development to meet technical needs of DER market protection, isolation, reliability, and quality. Program activities build on SatCon Technology Corporation inverter experience (e.g., AIPM, Starsine, PowerGate) for Photovoltaic, Fuel Cell, Energy Storage applications. Efforts focused four technical areas, Capacitors, Cooling, Voltage Sensing and Control of Parallel Inverters. Capacitor efforts developed a hybrid capacitor approach for conditioning SatCon's AIPM unit supply voltages by incorporating several typesmore » and sizes to store energy and filter at high, medium and low frequencies while minimizing parasitics (ESR and ESL). Cooling efforts converted the liquid cooled AIPM module to an air-cooled unit using augmented fin, impingement flow cooling. Voltage sensing efforts successfully modified the existing AIPM sensor board to allow several, application dependent configurations and enabling voltage sensor galvanic isolation. Parallel inverter control efforts realized a reliable technique to control individual inverters, connected in a parallel configuration, without a communication link. Individual inverter currents, AC and DC, were balanced in the paralleled modules by introducing a delay to the individual PWM gate pulses. The load current sharing is robust and independent of load types (i.e., linear and nonlinear, resistive and/or inductive). It is a simple yet powerful method for paralleling both individual devices dramatically improves reliability and fault tolerance of parallel inverter power systems. A patent application has been made based on this control technology.« less

  7. Technology in Counselor Education: HIPAA and HITECH as Best Practice

    ERIC Educational Resources Information Center

    Wilkinson, Tyler; Reinhardt, Rob

    2015-01-01

    The use of technology in counseling is expanding. Ethical use of technology in counseling practice is now a stand-alone section in the 2014 American Counseling Association "Code of Ethics." The Health Insurance Portability and Accountability Act (HIPAA) and the Health Information Technology for Economic and Clinical Health (HITECH) Act…

  8. In silico structural analysis of group 3, 6 and 9 allergens from Dermatophagoides farinae.

    PubMed

    Teng, Feixiang; Yu, Lili; Bian, Yonghua; Sun, Jinxia; Wu, Juansong; Ling, Cunbao; Yang, Li; Wang, Yungang; Cui, Yubao

    2015-05-01

    Dermatophagoides farinae (Hughes; Acari: Pyroglyphidae) are the predominant source of dust mite allergens, which provoke allergic diseases, such as rhinitis, asthma and eczema. Of the 30 allergen groups produced by D. farinae, the Der f 3, Der f 6 and Der f 9 allergens are all trypsin‑associated proteins, however little else is currently known about them. The present study used in silico tools to compare the amino acid sequences, and predict the secondary and tertiary structures of Der f 3, Der f 6 and Der f 9 allergens. Protein sequence alignment detected ~46% identity between Der f 3, Der f 6 and Der f 9. Furthermore, each protein was shown to contain three active sites and two highly conserved trypsin functional domains. Predictions of the secondary and tertiary structure identified α‑helices, β‑sheets and random coils. The active sites of the three proteins appeared to fold onto each other in a three‑dimensional model, constituting the active site of the enzyme. Epitope analysis demonstrated that Der f 3, Der f 6 and Der f 9 have 4‑5 potential epitopes located in random coils, and the epitope sequences of Der f 3, Der f 6 and Der f 9 were shown to overlap in two domains (at amino acids 83‑87 and 179‑180); however the residues in these two domains were not identical. The present study aimed to conduct a biochemical and genetic analysis of these three allergens, and to potentially contribute to the development of vaccines for allergen‑specific immunotherapy.

  9. Anti-Armor Defense Data Study (A2D2). Phase 2. Volume 4. US Anti-Tank Defense at Krinkelt-Rocherath, Belgium (December, 1944)

    DTIC Science & Technology

    1991-02-15

    Geschicbte der Stammdivision der Waffen -SS, Band V: 194 -1945. Osnabruck: Munln-Verlag, 1982. (Includes translation) (Stuttgart] 105 Weidinger, Otto, ed...1960. C -68 Weidinger, Otto. Division Das Reich. Der Weg der 2.SS Panzer-Division "Das Reich". Die Geschichte der Stammdivision der Waffen -SS, Band

  10. Broadcast News Education Lags in Technology Areas.

    ERIC Educational Resources Information Center

    Wollert, James A.

    1982-01-01

    Reports the results of a survey of broadcast journalism instructors in an effort to find out where college and university broadcast journalism programs stand in state-of-the-art technology for teaching purposes. (HOD)

  11. Zu einer inhaltsorientierten Theorie des Lernens und Lehrens der biologischen Evolution

    NASA Astrophysics Data System (ADS)

    Wallin, Anita

    Der Zweck dieser Studie (zwecks Überblick siehe dazu Abb. 9.1) war zu untersuchen, wie die Schüler der Sekundarstufe II ein Verständnis von der Theorie der biologischen Evolution entwickeln. Vom Ausgangspunkt "Vorurteile der Schüler“ ausgehend wurden Unterrichtssequenzen entwickelt und drei verschiedene Lernexperimente in einem zyklischen Prozess durchgeführt. Das Wissen der Schüler wurde vor, während und nach den Unterrichtssequenzen mit Hilfe von schriftlichen Tests, Interviews und Diskussionsrunden in kleinen Gruppen abgefragt. Etwa 80 % der Schüler hatten vor dem Unterricht alternative Vorstellungen von Evolution, und in dem Nachfolgetest erreichten circa 75 % ein wissenschaftliches Niveau. Die Argumentation der Schüler in den verschiedenen Tests wurde sorgfältig unter Rücksichtnahme auf Vorurteile, der konzeptionellen Struktur der Theorie der Evolution und den Zielen des Unterrichts analysiert. Daraus konnten Einsichten in solche Anforderungen an Lehren und Lernen gewonnen werden, die Herausforderungen an Schüler und Lehrer darstellen, wenn sie anfangen, evolutionäre Biologie zu lernen oder zu lehren. Ein wichtiges Ergebnis war, dass das Verständnis existierender Variation in einer Population der Schlüssel zum Verständnis von natürlicher Selektion ist. Die Ergebnisse sind in einer inhaltsorientierten Theorie zusammengefasst, welche aus drei verschiedenen Aspekten besteht: 1) den inhaltsspezifischen Aspekten, die einzigartig für jedes wissenschaftliche Feld sind; 2) den Aspekten, die die Natur der Wissenschaft betreffen; und 3) den allgemeinen Aspekten. Diese Theorie kann in neuen Experimenten getestet und weiter entwickelt werden.

  12. Development of magnetoelectric nanocomposite for soft technology

    NASA Astrophysics Data System (ADS)

    Bitla, Yugandhar; Chu, Ying-Hao

    2018-06-01

    The proliferation of flexible and stretchable electronics has led to substantial advancements in principles, material combinations and technologies. The integration of magnetoelectric systems in soft electronics is inevitable by virtue of their extensive applications. Recently, 2D layered materials have emerged as potential candidates due to their excellent flexibility and atomic-scale thickness scalability in addition to their interesting physics. This paper presents a new perspective on the development of magnetoelectric nanocomposites through materials engineering on a pliant mica with excellent mechanical, thermal and chemical stabilities. The unique features of 2D muscovite mica and the power of van der Waals epitaxy are expected to contribute significantly to the emerging transparent soft-technology research applications.

  13. The use of herbicides in hardwood forestery

    Treesearch

    James H. Miller

    1987-01-01

    Herbicides can play an important role in hardwood management by providing foresters and landowners with a means to eliminate undesirable stand components. Although herbicide technology for hardwood management still needs much development, some methods are available and MU be used to enhance the value of the stand. With an emphasis on safety, detailed information about...

  14. Virtuelle Kraftwerke für Smart Markets

    NASA Astrophysics Data System (ADS)

    Dürr, Thomas; Heyne, Jean-Christoph

    In den zurückliegenden Jahren haben insbesondere zwei Trends die Stromversorgung bestimmt: der starke Anstieg der dezentralen und der Ausbau der regenerativen Stromerzeugung, die vor allem in den Verteilnetzen stattfinden. Angesichts dieser Entwicklung gewinnen virtuelle Kraftwerke (VK) immer mehr an Bedeutung. In der frühen Phase waren VK insbesondere eine Möglichkeit, kleine dezentrale Erzeuger zu einer größeren Einheit zu bündeln und sie so marktfähig zu machen. Heute werden sie - überwacht und gesteuert über ein Dezentrales Energie-Management-System (DEMS) - gemeinsam mit Demand Response betrieben, also dem Reagieren eines Energieabnehmers auf Marktpreise. Das Demand Side Management soll zur Flexibilisierung der Industrie beitragen. Da der Ausbau der Übertragungsnetze nur schleppend vorankommt, kann die Nutzung von lastseitiger Flexibilität einen wichtigen Beitrag zur Versorgungssicherheit leisten. Im zweiten Teil des Beitrags geht es um die Entwicklung der Märkte. Großes Interesse besteht immer noch an der Regelenergie, zumal der Bedarf bis 2050 deutlich steigen wird. Die Spotmärkte Intraday und Day-Ahead wachsen kontinuierlich, deshalb werden sie für VK immer wichtiger. Am Ende gibt der Beitrag einen Ausblick auf die künftige Entwicklung, in der Regelenergie- und Spotmärkte noch eine Rolle spielen, aber andere Geschäftsmodelle wichtiger werden. Darüber hinaus geht es um langfristige Entwicklungen, die z. B. zusätzliche Serviceleistungen durch VK betreffen.

  15. Betriebsführung multimodaler Energiesysteme

    NASA Astrophysics Data System (ADS)

    Mackensen, Reinhard

    Die Transformation des Energiesystems von einer zentral geprägten, unidirektional orientierten und in unterschiedliche Sektoren separierten Struktur hin zu einer umfassenden, multimodalen, dezentralen und flexiblen Erzeuger- und Verbraucherlandschaft findet auf verschiedenen Ebenen statt. Randbedingung bei dieser Umwälzung ist immer die Einhaltung der Teilziele Versorgungssicherheit, Wirtschaftlichkeit und Effizienz. Im Einzelnen schlägt sich diese Transformation in einer Diversifizierung der Akteurslandschaft durch die Mechanismen des Unbundling nieder. Weiterhin finden eine Dezentralisierung der Erzeugerlandschaft und damit eine Substitution von mehrheitlich fossil betriebener Großkraftwerkstechnologie durch eine Vielzahl dezentraler Erzeuger mit zumeist regenerativem Charakter statt. Dieser Wandel hat im Wesentlichen zwei Hauptkonsequenzen. Zum einen ergeben sich durch dezentrale, flächige Verteilung der Erzeuger neue Anforderungen an den Energieaustausch, bspw. aus der Erweiterung der Stromnetze für einen bidirektionalen Energieaustausch, zum anderen werden Abstimmungsmechanismen erforderlich, welche die fluktuierende Einspeisung derart mit dem Verbrauch in Waage hält, dass sowohl elektrische Netzrestriktionen, die Qualität der Versorgung und Aspekte der Energieeffizienz und damit der Wirtschaftlichkeit berücksichtigt werden. Mögliche Antworten auf die mit dieser Betrachtung einhergehenden Fragen liegen in der Konzeption eines multimodalen Energiesystems, also in der Gesamtbetrachtung der Sektoren Strom, Wärme und Verkehr. Dieses Kapitel soll Mechanismen darlegen und Wege aufzeigen, wie eine solche Konzeption gestaltet werden kann und wie solche komplexen Systeme in der Praxis betrieben werden können.

  16. Fostering Distributed Science Learning through Collaborative Technologies

    ERIC Educational Resources Information Center

    Vazquez-Abad, Jesus; Brousseau, Nancy; Guillermina, Waldegg C.; Vezina, Mylene; Martinez, Alicia D.; de Verjovsky, Janet Paul

    2004-01-01

    TACTICS (French and Spanish acronym standing for Collaborative Work and Learning in Science with Information and Communications Technologies) is an ongoing project aimed at investigating a distributed community of learning and practice in which information and communications technologies (ICT) take the role of collaborative tools to support social…

  17. Craniota, Wirbel- oder Schädeltiere

    NASA Astrophysics Data System (ADS)

    Schultze, Hans-Peter

    Zu den Craniota zählen alle Chordatiere, die eine dreiteilige Regionalisierung des Körpers in Kopf, Rumpf und Schwanz aufweisen. Der Kopf umfasst (1) das Neurocranium mit Gehirn und komplexen Sinnesorganen zur Wahrnehmung der Umgebung, (2) das Viscerocranium zur Nahrungsaufnahme und zur Ventilation der Kiemen bei den primär wasserlebenden Craniota und (3) das Dermatocranium (S. 38). Letzteres entsteht durch Verknöcherungen im Bindegewebe des Integuments, es dient dem Schutz des Kopfes und trägt im Mundbreich die Zähne. Zusammen bilden die drei Skelettstrukturen die funktionelle Einheit Schädel (Cranium). Außer der (somatischen) Rumpfmuskulatur und dem Axialskelett liegen im Rumpf Kreislauf-, Atmungs-, Verdauungs-, Exkretions- und Fortpflanzungsorgane. Der Schwanz, der Abschnitt hinter der Afteröffnung, die das Ende der Leibeshöhle markiert, dient mit Muskeln und Schwanzflosse der Fortbewegung.

  18. „3D-augmented-reality“-Visualisierung für die navigierte Osteosynthese von Beckenfrakturen

    PubMed Central

    Befrui, N.; Fischer, M.; Fuerst, B.; Lee, S.-C.; Fotouhi, J.; Weidert, S.; Johnson, A.; Euler, E.; Osgood, G.; Navab, N.; Böcker, W.

    2018-01-01

    Zusammenfassung Hintergrund Trotz großer Fortschritte in der Entwicklung der Hard- und Software von Navigationssystemen finden diese aufgrund ihrer vermeintlichen Komplexität, umständlichen Integration in klinische Arbeitsabläufe und fraglichen Vorteilen gegenüber konventionellen bildgebenden Verfahren bisher wenig Einsatz in den heutigen Operationssälen. Ziel der Arbeit Entwicklung einer „Augmented-reality“(AR)-Darstellung zur chirurgischen Navigation ohne Infrarot(„IR“)-Tracking-Marker und Vergleich zum konventioneller Röntgen in einem simulierten Eingriff. Material und Methoden Navigationssystem bestehend aus „Cone-beam-CT“(CBCT)-fähigem C-Bogen und „Red-green-blue-depth“(RGBD)-Kamera. Testung durch Kirschner(K)-Draht-Platzierung in Modellen unter Berücksichtigung der benötigten Zeit, der Strahlendosis und der Benutzerfreundlichkeit der Systeme. Ergebnisse Eine signifikante Reduktion der benötigten Zeit, der Röntgenbilder und der gesamten Strahlendosis bei der AR-Navigation gegenüber dem konventionellen Röntgen bei gleichbleibender Präzision. Schlussfolgerung Die AR-Navigation mithilfe der RGBD-Kamera bietet flexible und intuitive Darstellungsmöglichkeiten des Operations-situs für navigierte Osteosynthesen ohne Tracking-Marker. Hiermit ist es möglich, Operationen schneller, einfacher und mit geringerer Strahlenbelastung für Patient und OP-Personal durchzuführen. PMID:29500506

  19. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Liu, Jian; Guo, Pan; University of Chinese Academy of Sciences, Beijing 100049

    Using molecular dynamics simulations, we show a fine linear relationship between surface energies and microscopic Lennard-Jones parameters of super-hydrophilic surfaces. The linear slope of the super-hydrophilic surfaces is consistent with the linear slope of the super-hydrophobic, hydrophobic, and hydrophilic surfaces where stable water droplets can stand, indicating that there is a universal linear behavior of the surface energies with the water-surface van der Waals interaction that extends from the super-hydrophobic to super-hydrophilic surfaces. Moreover, we find that the linear relationship exists for various substrate types, and the linear slopes of these different types of substrates are dependent on the surfacemore » atom density, i.e., higher surface atom densities correspond to larger linear slopes. These results enrich our understanding of water behavior on solid surfaces, especially the water wetting behaviors on uncharged super-hydrophilic metal surfaces.« less

  20. Technological advances in powered wheelchairs.

    PubMed

    Edlich, Richard F; Nelson, Kenneth P; Foley, Marni L; Buschbacher, Ralph M; Long, William B; Ma, Eva K

    2004-01-01

    During the last 40 years, there have been revolutionary advances in power wheelchairs. These unique wheelchair systems, designed for the physically immobile patient, have become extremely diversified, allowing the user to achieve different positions, including tilt, recline, and, more recently, passive standing. Because of this wide diversity of powered wheelchair products, there is a growing realization of the need for certification of wheeled mobility suppliers. Legislation in Tennessee (Consumer Protection Act for Wheeled Mobility) passed in 2003 will ensure that wheeled mobility suppliers must have Assistive Technology Supplier certification and maintain their continuing education credits when fitting individuals in wheelchairs for long-term use. Fifteen other legislative efforts are currently underway in general assemblies throughout the US. Manufacturers, dealers, hospitals, and legislators are working toward the ultimate goal of passing federal legislation delineating the certification process of wheeled mobility suppliers. The most recent advance in the design of powered wheelchairs is the development of passive standing positions. The beneficial effects of passive standing have been documented by comprehensive scientific studies. These benefits include reduction of seating pressure, decreased bone demineralization, increased bladder pressure, enhanced orthostatic circulatory regulation, reduction in muscular tone, decrease in upper extremity muscle stress, and enhanced functional status in general. In February 2003, Permobil, Inc., introduced the powered Permobil Chairman 2K Stander wheelchair, which can tilt, recline, and stand. Other companies are now manufacturing powered wheelchairs that can achieve a passive standing position. These wheelchairs include the Chief SR Powerchair, VERTRAN, and LifeStand Compact. Another new addition to the wheelchair industry is the iBOT, which can elevate the user to reach cupboards and climb stairs but has no passive standing capabilities. In addition, the physically immobile patient must be seated on an ERGODYNAMIC Seating System 2000, which is inflated by the alternating pressure compressor 8080. This seating system has a deep center seam between the two ischial-support chambers, which provides a recess for the coccyx. The pre-ischial crossbar compartment inflates during each cycle to prevent the pelvis from slipping forward. It is essential that the physician of the immobile patient order two ERGODYNAMIC Seating Systems 2000 because the patient must have an additional seating system in the case one leaks. Moreover, two compressors are necessary because each compressor must be serviced after 2500 hours of use. For the protection of the consumer, these pressure relief systems must be supplied and serviced by a Certified Rehabilitation Technology Supplier such as Wheelchair Works Inc. Despite the indisputable scientific evidence of the medical benefits of passive standing for the immobile user, few individuals have access to these revolutionary wheelchairs. Consequently, it is mandatory that the medical community, headed by specialists in physical and occupational therapy as well as rehabilitation medicine, CRTS, and manufacturers collaborate in a national education campaign to convince Medicare/Medicaid and all commercial insurance companies to approve immediately these assisted technologies. This program is essential so that the physically immobilized patient can achieve the undisputed physical benefits of passive standing.

  1. 3 CFR 8617 - Proclamation 8617 of December 17, 2010. Wright Brothers Day, 2010

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... technological leadership and innovation has been the product of learning and ingenuity. To maintain this... and great technological advancement. Their unyielding pursuit of powered flight stands as a proud...

  2. Test/QA plan for the verification testing of diesel exhaust catalysts, particulate filters and engine modification control technologies for highway and nonroad use diesel engines

    EPA Science Inventory

    This ETV test/QA plan for heavy-duty diesel engine testing at the Southwest Research Institute’s Department of Emissions Research (DER) describes how the Federal Test Procedure (FTP), as listed in 40 CFR Part 86 for highway engines and 40 CFR Part 89 for nonroad engines, will be ...

  3. An Experiential-Based Learning Method Aiming to Improve Spatial Awareness Utilizing GPS, Geocaching, and Geo-Selfies

    ERIC Educational Resources Information Center

    Flynn, K. Colton; Popp, Jennie

    2016-01-01

    Many educators have suggested that spatial awareness is vital in the foundation of geography curricula, as well as the ability to utilize geospatial technologies (National Research Council 2006; Kerski 2008; Lee and Bednarz 2009; Favier and Van der Schee 2014). The purpose of this research was to identify a low-cost and effective method to improve…

  4. 4. This photographic copy of an engineering drawing shows the ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. This photographic copy of an engineering drawing shows the plan and details for Test Stand "G" and the placement of the vibrator. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: "Vibration Test Facility-Bldg E-72, Floor & Roof Plans, Sections, Details & Door Schedule," drawing no. E72/2-5, 21 May 1964. California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering: engineering drawings of structures at JPL Edwards Facility. Drawings on file at JPL Plant Engineering, Pasadena, California. - Jet Propulsion Laboratory Edwards Facility, Test Stand G, Edwards Air Force Base, Boron, Kern County, CA

  5. Teen Girls and Technology: What's the Problem, What's the Solution?

    ERIC Educational Resources Information Center

    Farmer, Lesley

    2008-01-01

    Are teenage girls being left behind in the technology race? According to author and professor Lesley Farmer, teenage girls are not embracing technology and all of its potential impact on their futures. In "Teen Girls and Technology", Farmer explores the developmental issues of teen girls, including the reality of girls and tech as it now stands.…

  6. Preparing Special Education Teachers to Use Educational Technology to Enhance Student Learning

    ERIC Educational Resources Information Center

    Wallace, Teresa; Georgina, David

    2014-01-01

    New standards require teachers to integrate the use of technology in their teaching and preparing teachers at the preservice level to integrate technology into the classroom is key. The way in which this is accomplished varies across institutions though often a technology tools course stands as an individual course with the hope professors are…

  7. Integrating Technology and Pedagogy for Inquiry-Based Learning: The Stanford Mobile Inquiry-Based Learning Environment (SMILE)

    ERIC Educational Resources Information Center

    Buckner, Elizabeth; Kim, Paul

    2014-01-01

    Despite the long-standing interest in educational technology reforms, many researchers have found that it is difficult to incorporate advanced information and communications technologies (ICT) in classrooms. Many ICT projects, particularly in the developing world, are limited by the lack of integration between pedagogy and technology. This article…

  8. Potential Application of BIOMASS Technology at National Space Technology Laboratories and Mississippi Army Ammunition Plant.

    DTIC Science & Technology

    1980-02-01

    fuel. Based on the survey data, wood chips in the NSTL area are sold for $13 to $16 per wet ton ($14 to $18 Der l03 kg wet), bark for $6 to $7 per wet...truck 3 Chip vans (initially) 1 Pickup (3/4 ton) 1 Front-end loader (for handling at chip pile) This equipment combination assumes all material ]-inch...ing sites in chip vans , preferably with live-beds to aid in unloading. At the processing site the chips would be stored in large piles. A Front-end

  9. Giant tunneling magnetoresistance in spin-filter van der Waals heterostructures

    DOE PAGES

    Song, Tiancheng; Cai, Xinghan; Tu, Matisse Wei-Yuan; ...

    2018-05-03

    Magnetic multilayer devices that exploit magnetoresistance are the backbone of magnetic sensing and data storage technologies. Here, we report multiple-spin-filter magnetic tunnel junctions (sf-MTJs) based on van der Waals (vdW) heterostructures in which atomically thin chromium triiodide (CrI3) acts as a spin-filter tunnel barrier sandwiched between graphene contacts. We demonstrate tunneling magnetoresistance which is drastically enhanced with increasing CrI 3 layer thickness, reaching a record 19,000% for magnetic multilayer structures using four-layer sf-MTJs at low temperatures. Using magnetic circular dichroism measurements, we attribute these effects to the intrinsic layer-by-layer antiferromagnetic ordering of the atomically thin CrI 3. In conclusion, ourmore » work reveals the possibility to push magnetic information storage to the atomically thin limit and highlights CrI 3 as a superlative magnetic tunnel barrier for vdW heterostructure spintronic devices.« less

  10. Giant tunneling magnetoresistance in spin-filter van der Waals heterostructures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Song, Tiancheng; Cai, Xinghan; Tu, Matisse Wei-Yuan

    Magnetic multilayer devices that exploit magnetoresistance are the backbone of magnetic sensing and data storage technologies. Here, we report multiple-spin-filter magnetic tunnel junctions (sf-MTJs) based on van der Waals (vdW) heterostructures in which atomically thin chromium triiodide (CrI3) acts as a spin-filter tunnel barrier sandwiched between graphene contacts. We demonstrate tunneling magnetoresistance which is drastically enhanced with increasing CrI 3 layer thickness, reaching a record 19,000% for magnetic multilayer structures using four-layer sf-MTJs at low temperatures. Using magnetic circular dichroism measurements, we attribute these effects to the intrinsic layer-by-layer antiferromagnetic ordering of the atomically thin CrI 3. In conclusion, ourmore » work reveals the possibility to push magnetic information storage to the atomically thin limit and highlights CrI 3 as a superlative magnetic tunnel barrier for vdW heterostructure spintronic devices.« less

  11. Stufenweise Integration von eLearning an der Technischen Universität München

    NASA Astrophysics Data System (ADS)

    Pätzold, Sebastian; Graf, Stephan; Gergintchev, Ivan; Pongratz, Hans; Rathmayer, Sabine

    Der vorliegende Beitrag beschreibt als Best Practice Beispiel die stufenweise Integration eines Learning Management Systems (LMS) in die Infrastruktur von Information und Kommunikation (IuK) der Technischen Universität München (TUM). Dabei wird sowohl die Konsolidierung mehrfach angebotener Funktionalitäten und Dienste in den verschiedenen Portalen der Universität als auch die sukzessive Optimierung der Abläufe aufgezeigt. Gleichzeitig wird auf zukünftige weitere Entwicklungen hin zu einer vollständigen Integration der IuK, aber auch auf die Probleme in den unterschiedlichen Stadien der Entwicklung eingegangen.

  12. Meilensteine in der Erforschung der kompakten Objekte

    NASA Astrophysics Data System (ADS)

    Camenzind, Max

    Kompakte Objekte besitzen zum einen eine sehr hohe Dichte, und zum anderen sind sie durch die Tatsache charakterisiert, dass keine nuklearen Reaktionen mehr in ihrem Inneren stattfinden können. Aus diesem Grund können sie im Unterschied zu gewöhnlichen Sternen der Gravitation nicht mehr mit dem Druck des thermischen Gases widerstehen. In den Weißen Zwergen bzw. Neutronensternen wird der Gravitation der Quantendruck eines Elektronengases bzw. einer Neutronenflüssigkeit entgegengesetzt. Ein solches Gas besteht aus Elektronen bzw. Neutronen, die auf ihr niedrigstes Energieniveau zusammengepresst wurden. Durch die daraus resultierende hohe Bewegungsenergie der Fermionen wird der sogenannte Quantendruck erzeugt.

  13. Extrusion & Compoundierung

    NASA Astrophysics Data System (ADS)

    Collin, Heinz; Schulze, Verena

    Unter Extrusion wird das kontinuierliche Fördern von formbaren Massen verstanden. Dies können Kunststoffe, Teigwaren in der Lebensmittelindustrie oder auch keramische Massen sein. In der chemischen Industrie werden ebenfalls hochviskose (schwerfließende) Stoffe oder Pasten dosiert, gefördert und extrudiert. Früher waren vorzugsweise Kolbenstrangpressen im Einsatz, bis sich ab 1950 in steigendem Maße die Schneckenmaschinen durchgesetzt haben. Der weltweite Siegeszug der Kunststoffe ist zu einem erheblichen Teil auf die stetige technologische Weiterentwicklung im Bereich der Extrusionstechnik zurückzuführen. Der Markt der weltweit produzierten Maschinen für die Kunststoffverarbeitung erreichte im Jahr 2006 einen Wert von 20 Milliarden Euro und somit zählt dieser Bereich mittlerweile zu einem der großen Industriezweige [1].

  14. Implantate in der Augenheilkunde

    NASA Astrophysics Data System (ADS)

    Dresp, Joachim H.

    Im Bereich der Augenheilkunde findet sich die weltweit am häufigsten ausgeführte chirurgische Massnahme, die operative Behandlung des Grauen Stars: die Katarakt. Bei der Katarakt handelt es sich um eine Eintrübung der natürlichen Augenlinse, die sich je nach Stadium der Erkrankung leicht opak, über milchig bis zu bräunlich präsentiert. Mit dieser Zunahme der Undurchlässigkeit für das sichtbare Licht geht eine Abnahme des Sehvermögens einher, die bis zur totalen Erblindung führen kann. Bedingt durch die sehr eingeschränkten chirurgischen Möglichkeiten in den Ländern der Dritten Welt ist die Katarakt die Erblindungsursache Nummer 1 in der Welt. Ganz im Gegensatz hierzu ist in den industrialisierten Ländern Europas, Amerikas und Asiens die Katarakt-OP die sicherste chirurgische Intervention. In der Augenheilkunde werden Implantate aller drei Aggregatszustände verwendet.

  15. Medizintechnik in der Tumororthopädie

    NASA Astrophysics Data System (ADS)

    Burgkart, Rainer; Gollwitzer, Hans; Holzapfel, Boris; Rudert, Maximilian; Rechl, Hans; Gradinger, Reiner

    Die Behandlung der Knochentumoren unterlag in den letzten 20 Jahren einem raschen und stetigen Wandel, was zum einen auf die verbesserten Therapieerfolge durch den Einsatz von neoadjuvanten Therapieformen zurückzuführen ist, und andererseits von medizintechnischen Entwicklungen bezüglich moderner Schnittbilddiagnostik, neuer 3D Operationsplanungsverfahren wie das Rapid Prototyping und adaptiv modularer Tumorendoprothesensystemen u. a. begleitet wurde. Gerade die technischen Entwicklungen haben dazu geführt, daß im Bereich der Extremitäten und der Wirbelsäule radikalere Eingriffe durchgeführt werden können, was die lokale Tumorkontrolle wesentlich verbessert hat. In zunehmenden Maße werden deshalb nicht nur Kurzzeiterfolge sondern auch mittel- und langfristige Fortschritte bei der Behandlung der malignen Knochentumoren einschließlich der Metastasenbehandlung erreicht. Grundlage der Therapie ist dabei immer primär die Sicherung der Diagnose mittels Biopsie und die bildgebende sowie histologische Stadieneinteilung des malignen Tumors. Nach der Tumorresektion kann die Rekonstruktion biologisch oder mit Endoprothesensystemen erfolgen. Gerade die weiterentwickelten modularen Systeme führen zu guten funktionellen Ergebnissen mit langen Standzeiten und einer reduzierten Komplikationsrate. Individuell angefertigte Implantate sind vor allem im Bereich der Rekonstruktion komplexer Beckentumoren von großer klinischer Bedeutung.

  16. Exploring Aeronautics and Space Technology. Teacher Edition.

    ERIC Educational Resources Information Center

    Buck, Sue; And Others

    This curriculum guide contains six units of instruction for an introduction to the technology systems in the National Aeronautics and Space Administration (NASA). Designed to be used either as a stand-alone publication or to be infused into the instruction and activities of an existing technology education program, this publication describes the…

  17. Critical Technology Accessibility

    ERIC Educational Resources Information Center

    National Academies Press, 2006

    2006-01-01

    In 2003, the Defense Intelligence Agency asked the NRC to form a standing committee to help develop study topics about technology warning. One issue that was identified was the growing dependence on foreign suppliers of critical technology as a result of the increase in globalization of economic activity. Two important questions emerged for study:…

  18. The Technological Enframing of Mathematics Education

    ERIC Educational Resources Information Center

    Thornton, Steve

    2014-01-01

    In this paper I seek to critique pervasive notions of what counts in mathematics education using Heidegger's notion of the technological enframing. I suggest that early childhood and schooling have become technologies in themselves, casting students and teachers as part of the standing reserve within the inexorable drive for economic advancement.…

  19. Z-2 Suit Support Stand and MKIII Suit Center of Gravity Test

    NASA Technical Reports Server (NTRS)

    Nguyen, Tuan Q.

    2014-01-01

    NASA's next generation spacesuits are the Z-Series suits, made for a range of possible exploration missions in the near future. The prototype Z-1 suit has been developed and assembled to incorporate new technologies that has never been utilized before in the Apollo suits and the Extravehicular Mobility Unit (EMU). NASA engineers tested the Z-1 suit extensively in order to developed design requirements for the new Z-2 suit. At the end of 2014, NASA will be receiving the new Z-2 suit to perform more testing and to further develop the new technologies of the suit. In order to do so, a suit support stand will be designed and fabricated to support the Z-2 suit during maintenance, sizing, and structural leakage testing. The Z-2 Suit Support Stand (Z2SSS) will be utilized for these purposes in the early testing stages of the Z-2 suit.

  20. Zeitlicher Verlauf der avaskulären Nekrose des Hüftkopfes bei Patienten mit Pemphigus vulgaris.

    PubMed

    Balighi, Kamran; Daneshpazhooh, Maryam; Aghazadeh, Nessa; Saeidi, Vahide; Shahpouri, Farzam; Hejazi, Pardis; Chams-Davatchi, Cheyda

    2016-10-01

    Pemphigus vulgaris (PV) wird in der Regel mit systemischen Corticosteroiden und Immunsuppressiva behandelt. Avaskuläre Nekrose (AVN) des Hüftkopfes ist eine gut bekannte schwerere Komplikation einer Corticosteroid-Therapie. Die Charakteristika dieser schweren Komplikation bei PV sind nach wie vor unbekannt. Nicht kontrollierte, retrospektive Untersuchung aller PV-bedingten AVN-Fälle, die in einer iranischen Klinik für bullöse Autoimmunerkrankungen zwischen 1985 und 2013 diagnostiziert wurden. Anhand der Krankenakten von 2321 untersuchten PV-Patienten wurden 45 Fälle (1,93 %) von femoraler AVN identifiziert. Dreißig davon waren Männer. Das mittlere Alter bei der Diagnose der AVN betrug 47,4 ± 14,2 Jahre. Der mittlere Zeitraum zwischen der Diagnose des PV und dem Einsetzen der AVN lag bei 25,3 ± 18,3 Monaten. Mit Ausnahme von acht Fällen (17,8 %) setzte die AVN bei der Mehrheit der Patienten innerhalb von drei Jahren nach Diagnose des PV ein. Die mittlere kumulative Dosis von Prednisolon bei Patienten mit AVN betrug 13.115,8 ± 7041,1 mg. Zwischen der Prednisolon-Gesamtdosis und dem Zeitraum bis zum Einsetzen der AVN bestand eine starke Korrelation (p = 0,001). Bei Patienten mit Alendronateinnahme in der Vorgeschichte war dieser Zeitraum signifikant kürzer (p = 0,01). Die AVN ist eine schwere Komplikation einer Corticosteroid-Behandlung bei Patienten mit PV. Sie wird bei 2 % der Patienten beobachtet und tritt vor allem in den ersten drei Behandlungsjahren auf. Bei Patienten, die höhere Dosen von Prednisolon erhalten, setzt die AVN tendenziell früher ein. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  1. Umsetzung der Unternehmensstrategie mit der Balanced Scorecard

    NASA Astrophysics Data System (ADS)

    Crespo, Isabel; Bergmann, Lars; Portmann, Stefan; Lacker, Thomas; Lacker, Michael; Fleischmann, Jürgen; Kozó, Hans

    Die Balanced Scorecard (BSC) ist ein Ansatz zum strategischen Management, der neben der Ausrichtung des Unternehmens auf finanzielle Zielwerte ebenso großes Gewicht auf so genannte weiche Faktoren legt, die den wirtschaftlichen Erfolg eines Unternehmens erst ermöglichen. Das entscheidende Merkmal der Balanced Scorecard ist dabei, dass sie ein ausgewogenes System strategischer Ziele herstellt, welches das Unternehmen hinsichtlich der vier Perspektiven Finanzen, Kunden, interne Prozesse und Mitarbeiter und Potenziale strategisch ausrichtet (Kaplan u. Norton 1997).

  2. Ecological Technologies for Small-Diameter Tree Harvesting

    Treesearch

    Bryce J. Stokes; John F. Klepac

    1997-01-01

    Production, costs, and merchantable chip recovery values were developed for a tree-length, flail/chip, and cut-to-length system. The systems were evaluated for three representative stands: early thinning, late thinning, and a clearcut. A sensitivity analysis was completed for the three systems over a range of tree diameters. Recovery was affected by stand type and...

  3. The Distributed Geothermal Market Demand Model (dGeo): Documentation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McCabe, Kevin; Mooney, Meghan E; Sigrin, Benjamin O

    The National Renewable Energy Laboratory (NREL) developed the Distributed Geothermal Market Demand Model (dGeo) as a tool to explore the potential role of geothermal distributed energy resources (DERs) in meeting thermal energy demands in the United States. The dGeo model simulates the potential for deployment of geothermal DERs in the residential and commercial sectors of the continental United States for two specific technologies: ground-source heat pumps (GHP) and geothermal direct use (DU) for district heating. To quantify the opportunity space for these technologies, dGeo leverages a highly resolved geospatial database and robust bottom-up, agent-based modeling framework. This design is consistentmore » with others in the family of Distributed Generation Market Demand models (dGen; Sigrin et al. 2016), including the Distributed Solar Market Demand (dSolar) and Distributed Wind Market Demand (dWind) models. dGeo is intended to serve as a long-term scenario-modeling tool. It has the capability to simulate the technical potential, economic potential, market potential, and technology deployment of GHP and DU through the year 2050 under a variety of user-defined input scenarios. Through these capabilities, dGeo can provide substantial analytical value to various stakeholders interested in exploring the effects of various techno-economic, macroeconomic, financial, and policy factors related to the opportunity for GHP and DU in the United States. This report documents the dGeo modeling design, methodology, assumptions, and capabilities.« less

  4. Einsatz molekularer Methoden für Starterkulturen

    NASA Astrophysics Data System (ADS)

    Ehrmann, Matthias A.; Pavlovic, Melanie

    Unter Starterkulturen versteht man Mikroorganismen (Bakterien, Hefen, Pilze), die pflanzlichen bzw. tierischen Rohstoffen zur gezielten Veränderung ihrer chemischen Zusammensetzung zugesetzt werden. Sie dienen im Wesentlichen der Aromabildung, der Strukturveränderung und der Konservierung der Lebensmittel und werden aufgrund spezieller, funktioneller Eigenschaften selektiert. Die Zugabe von Starterkulturen erfolgt in der Regel in relativ hohen Keimzahlen in Form von Rein- oder Mischkulturen. Die zum Einsatz kommenden Mikroorganismen sind ebenso zahlreich wie die daraus resultierenden Produkte und reichen von der Fermentation von Milchprodukten, Fleisch und Gemüse durch Milchsäurebakterien über die Essigsäureherstellung bis hin zum Einsatz von Hefen in der Brau- und Weinindustrie. Hieraus ergibt sich auch eine zunehmende Bedeutung schneller und zuverlässiger Methoden zur taxonomischen Identifizierung, aber auch zur Charakterisierung des genetischen Potenzials der jeweiligen Starterkulturen.

  5. Satellitenbewegung, band III: Natiirliche und gesteuerte bewegung.

    NASA Astrophysics Data System (ADS)

    Jochim, E. F.

    2014-12-01

    Im dritten Band der Satellitenbewegung werden in fortlaufender Nummerierung einige für Untersuchungen der Bewegung der künstlichen Satelliten wichtige Grundlagen der Astrodynamik mit ausführlichen mathematischen Formelsystemen behandelt. Dazu zählen die unterschiedlichen Aspekte der Bewegung der natürlichen Himmelskörper, die Steuerung und Kontrolle von künstlichen Objekten, und insbesondere die für eine Satellitenbahnanalyse wichtigen physikalischen Beeinflussungen einer Satellitenbewegung. Mathematisch entscheidend ist die Wahl geeigneter Bahnparameter, die ein bestimmtes Bewegungsproblem widerspruchsfrei und singularitätenfrei zu behandeln gestatten. Für die Behandlung routinemäßiger Aufgabenstellungen der Satellitenbewegung, in erster Linie einer präzisen Bahnbestimmung und Bahnverbesserung, kann auf eine Fülle von lehrbuchartigen Monographien verwiesen werden, so dass diese Problematik in der vorliegenden Arbeit nur angedeutet werden soll.

  6. Group 1 and 2 Dermatophagoides house dust mite allergens in the microenvironment of cats.

    PubMed

    Loft, Klaus Earl; Rosser, Edmund J

    2010-04-01

    House dust mite allergens (HDMAs) are some of the most common allergens associated with allergic diseases in humans and dogs. The purpose of this study was to determine whether HDMAs could be detected in cat-associated household microenvironments. From 50 cat-only households with 95 cats, dust samples were collected by vacuuming for 2 min m(-2) from three areas where cats slept or rested regularly from September to October 2006. Relative humidity and temperature were measured in each household using a data logger. Each owner completed a questionnaire on potential factors that might influence the prevalence of house dust mites (HDMs). Dust samples were analysed utilizing an ELISA for Der p 1, Der f 1 and HDM group 2 allergens. In 38 of 50 households there was greater than 2 microg g(-1) of dust for at least one HDMA. Using stepwise logistic regression, factors associated with increased HDMA levels included: free-standing houses, number of humans in household, longhaired cats and age of the cat. Factors associated with decreased HDMA concentrations included: forced air heating and central air conditioning, less than 50% carpeting of the home, use of flea control, cats suffering from dermatological disease and the average temperature of the household. Many sleeping/resting areas utilized by cats contain sufficiently high levels of HDMAs to be potential sources of sensitization. This finding should lead to further determination of the role of HDMs in cats suffering from putative allergic conditions such as atopic dermatitis or asthma.

  7. Was leistet ein Sportler? Kraft, Leistung und Energie im Muskel

    NASA Astrophysics Data System (ADS)

    Thaller, Sigrid; Mathelitsch, Leopold

    2006-01-01

    Der Leistungsbegriff ist im Sport weiter gefasst als in der Physik. In beiden Fällen liegt der Fokus jedoch auf einer pro Zeiteinheit erfolgten Energieumsetzung. Allerdings gibt die rein physikalische Leistung nicht immer Auskunft über den Energieumsatz der Muskeln. Die Muskelkraft hängt von der Kontraktionsgeschwindigkeit des Muskels ab. Ein Muskel verhält sich also anders als eine Feder. Für den Hochleistungssport müssen die Energieumsätze der Muskeln durch spezielle Trainings- und Nahrungsprogramme optimiert werden.

  8. Sterblichkeit: der paradoxe Kunstgriff des Lebens - Eine Betrachtung vor dem Hintergrund der modernen Biologie

    NASA Astrophysics Data System (ADS)

    Verbeek, Bernhard

    Leben gibt es auf der Erde seit fast 4 Mio. Jahren, trotz allen Katastrophen. Die Idee des Lebens scheint unsterblich. Der Tod aber offenbar auch. Jedes Lebewesen ist davon bedroht, ja für Menschen und andere "höhere“ Lebewesen ist er im Lebensprogramm eingebaut - todsicher. Diese Tatsache ist alles andere als selbstverständlich. Ist sie überhaupt kompatibel mit dem Prinzip der Evolution, nach dem der am besten Angepasste überlebt?

  9. A New Remote Communications Link to Reduce Residential PV Solar Costs

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    King, Randy; Sugiyama, Rod

    Monitoring of PV/DER site production is expensive to install and unreliable. Among third party systems providers, lost communications links are a growing concern. Nearly 20% of links are failing, provisioning is complex, recovery is expensive, production data is lost, and access is fragmented. FleetLink is a new concept in DER system communications, purpose built for lowering the cost of maintaining active contact with residential end user sites and ensuring that production data is reliably available to third party systems providers. Systems providers require accurate, secure system monitoring and reporting of production data and system faults while driving down overall costsmore » to compete effectively. This plug and play, independently operating communications solution lowers the cost of fleet contact from typically .08 dollars-$.12/W down to .02 dollars -.03/W including installation and maintenance expenses. FleetLink establishes a breakthrough in simplicity that facilitates rapid expansion of residential solar by reducing initial capital outlay and lowering installation labor time and skill levels. The solution also facilitates higher DER installation growth rates by driving down maintenance costs and eliminating communications trouble calls. This is accomplished by the FleetLink’s unique network technology that enables dynamic network configuration for fast changes, and active, self-healing DER site contact for uptime assurance. Using an open source network framework with proprietary, application specific enhancements, FleetLink independently manages connectivity, security, recovery, grid control communications, and fleet expansion while presenting a compliant SunSpec interface to the third party operations centers. The net system cost savings of at least .05 dollars/W supports the SunShot cost goals and the flexibility and scalability of the solution accelerates the velocity and ubiquitous adoption of solar.« less

  10. Stenting und technische Stentumgebung

    NASA Astrophysics Data System (ADS)

    Hoffstetter, Marc; Pfeifer, Stefan; Schratzenstaller, Thomas; Wintermantel, Erich

    In hoch entwickelten Industrieländern stehen laut Weltgesundheitsorganisation (WHO) Herz-Kreislauf-Erkrankungen und speziell die Koronare Herzkrankheit (KHK) an erster Stelle der Todesursachen. In Deutschland betrug die Zahl der erfassten, an KHK erkrankten Personen ohne Berücksichtigung der Dunkelziffer allein im Jahre 2001 über 473.000. Die KHK war im Jahre 2003 mit 92.673 erfassten Todesfällen immer noch die häufigste Todesursache, obgleich in Deutschland die Häufigkeit der Koronarinterventionen zur Behandlung der KHK zwischen 1984 und 2003 um fast das 80fache von 2.809 auf 221.867 Eingriffe pro Jahr gestiegen ist [1]. Neben der hohen Zahl an Todesfällen haben die betroffenen Personen durch chronische Schmerzen und eingeschränkte körperliche Leistungsfähigkeit zusätzlich eine starke Beeinträchtigung der Lebensqualität [2].In Folge dessen wird die erkrankte Person häufig zum Pflegefall was neben den gesundheitlichen Aspekten auch eine sozioökonomische Komponente in Form der fehlenden Arbeitskraft und den auftretenden Pflegekosten nach sich zieht. Die Kosten für die Behandlung der KHK in Deutschland beliefen sich im Jahre 2002 laut Statistischem Bundesamt auf rund 6,9 Mrd. €. Verglichen mit ähnlichen Zahlen der USA dürfte sich der entstandene Schaden für die deutsche Volkswirtschaft im zwei- bis dreistelligen Milliardenbereich bewegen [3].

  11. Characterisation of tropomyosin and paramyosin as vaccine candidate molecules for the poultry red mite, Dermanyssus gallinae.

    PubMed

    Wright, Harry W; Bartley, Kathryn; Huntley, John F; Nisbet, Alasdair J

    2016-10-12

    Dermanyssus gallinae is the most economically important haematophagous ectoparasite in commercial egg laying flocks worldwide. It infests the hens during the night where it causes irritation leading to restlessness, pecking and in extreme cases anaemia and increased cannibalism. Due to an increase in the occurrence of acaricide-resistant D. gallinae populations, new control strategies are required and vaccination may offer a sustainable alternative to acaricides. In this study, recombinant forms of D. gallinae tropomyosin (Der g 10) and paramyosin (Der g 11) were produced, characterised and tested as vaccine candidate molecules. The D. gallinae paramyosin (Der g 11) coding sequence was characterised and recombinant versions of Der g 11 and D. gallinae tropomyosin (Der g 10) were produced. Hens were immunised with the recombinant proteins and the resulting antibodies were fed to D. gallinae and mite mortality evaluated. Sections of mites were probed with anti- Der g 11 and Der g 10 antibodies to identify the tissue distribution of these protein in D. gallinae. The entire coding sequence of Der g 11 was 2,622 bp encoding 874 amino acid residues. Immunohistochemical staining of mite sections revealed that Der g 10 and Der g 11 were located throughout D. gallinae tissues. In phylogenetic analyses of these proteins both clustered with orthologues from tick species rather than with orthologues from astigmatid mites. Antibodies raised in hens against recombinant forms of these proteins significantly increased D. gallinae mortality, by 19 % for Der g 10 (P < 0.001) and by 23 % for Der g 11 (P = 0.009) when fed to the mites using an in vitro feeding device. This study has shown that Der g 10 and Der g 11 were located ubiquitously throughout D. gallinae and that antibodies raised against recombinant versions of these proteins can be used to significantly increase D. gallinae mortality in an in vitro feeding assay. When comparing archived data for all recombinant and native proteins assessed as vaccines using this in vitro feeding assay, Der g 10 and Der g 11 ranked highly and performed better than some of the pools of native proteins.

  12. Die Baukastensystematik in der Fördertechnik

    NASA Astrophysics Data System (ADS)

    Sebulke, Johannes

    In der Fördertechnik wird kaum ein größerer Einsatzfall so dem anderen gleichen, dass man zwei Anlagen nach denselben Zeichnungen fertigen kann. Konstruktionszeiten, Rüst- und Umstellungszeiten der Fertigung sind hoch; der Kunde muss bei Einzelanfertigung lange Lieferzeiten in Kauf nehmen. In der Fördertechnik haben sich daher Baukastenprinzip, Standardisierung und die Konstruktion von Erzeugnisreihen weitgehend durchgesetzt.

  13. Kontinuierliche Wanddickenbestimmung und Visualisierung des linken Herzventrikels

    NASA Astrophysics Data System (ADS)

    Dornheim, Lars; Hahn, Peter; Oeltze, Steffen; Preim, Bernhard; Tönnies, Klaus D.

    Zur Bestimmung von Defekten in der Herztätigkeit kann die Veränderung der Wanddicke des linken Ventrikels in zeitlichen MRTAufnahmesequenzen gemessen werden. Derzeit werden für diese Bestimmung im allgemeinen nur die aufwändig manuell erstellte Segmentierungen der Endsystole und Enddiastole benutzt. Wir stellen ein bis auf die Startpunktinitialisierung automatisches Verfahren zur Bestimmung der Wanddicke des linken Ventrikels und ihrer Veränderung vor, das auf einer vollständigen Segmentierung der Herzwand in allen Zeitschritten durch ein dynamisches dreidimensionales Formmodell (Stabiles Feder-Masse-Modell) basiert. Dieses Modell nutzt bei der Segmentierung neben der Grauwertinformation eines Zeitschrittes auch die Segmentierungen der anderen Zeitschritte und ist so aufgebaut, dass die Wanddicken direkt gemessen und visualisiert werden können. Auf diese Weise werden die lokalen Wanddickenextrema über den gesamten Aufnahmezeitraum detektiert, auch wenn sie nicht in die Endsystole bzw. -diastole fallen. Das Verfahren wurde auf sechs 4D-Kardio-MRT-Datensätzen evaluiert und stellte sich als sehr robust bzgl. der einzig nötigen Interaktion heraus.

  14. Enhanced technologies for unattended ground sensor systems

    NASA Astrophysics Data System (ADS)

    Hartup, David C.

    2010-04-01

    Progress in several technical areas is being leveraged to advantage in Unattended Ground Sensor (UGS) systems. This paper discusses advanced technologies that are appropriate for use in UGS systems. While some technologies provide evolutionary improvements, other technologies result in revolutionary performance advancements for UGS systems. Some specific technologies discussed include wireless cameras and viewers, commercial PDA-based system programmers and monitors, new materials and techniques for packaging improvements, low power cueing sensor radios, advanced long-haul terrestrial and SATCOM radios, and networked communications. Other technologies covered include advanced target detection algorithms, high pixel count cameras for license plate and facial recognition, small cameras that provide large stand-off distances, video transmissions of target activity instead of still images, sensor fusion algorithms, and control center hardware. The impact of each technology on the overall UGS system architecture is discussed, along with the advantages provided to UGS system users. Areas of analysis include required camera parameters as a function of stand-off distance for license plate and facial recognition applications, power consumption for wireless cameras and viewers, sensor fusion communication requirements, and requirements to practically implement video transmission through UGS systems. Examples of devices that have already been fielded using technology from several of these areas are given.

  15. CONTAINMENT TECHNOLOGY AND MONITORING

    EPA Science Inventory

    Subsurface vertical barriers have been used to control ground-water seepage in the construction industry for many years. Recently, much attention has been focused on the use of containment technologies as supplemental and stand-alone remedial options for hazardous waste sites to...

  16. Intelligente Messsysteme - Mehrwert für unterschiedliche Stufen der Wertschöpfung

    NASA Astrophysics Data System (ADS)

    Deppe, Benjamin

    Die Veränderung der Energiewirtschaft schreitet kontinuierlich voran - und wird mit Gesetz zur Digitalisierung der Energiewende nicht abgeschlossen sein. Vielmehr steigen die Innovationsgeschwindigkeit und die Erwartungshaltung der Kunden. Dieses Kapitel beschreibt, wie intelligente Messsysteme die Basis für neue Möglichkeiten schaffen und wie sich diese Veränderungen auf die Wertschöpfung auswirken. Der Fokus liegt dabei auf dem Wandel der einzelnen Wertschöpfungsstufen im Verlauf der Liberalisierung des Messwesens und dem seit dem 02.09.2016 verbindlichen Messstellenbetriebsgesetzes. Der Beitrag zeigt auf, wie sich bisher getrennte Wertschöpfungsstufen nunmehr direkt berühren und miteinander interagieren. Deutlich wird dadurch, wie Informationen zu Mehrwert führen können - aber auch, welche Fragen noch zu beantworten sind und welche Hürden es zu überwinden gilt.

  17. Zum Wissenschaftsverständnis der modernen Evolutionsbiologie

    NASA Astrophysics Data System (ADS)

    Sommer, Ralf J.

    Die moderne Evolutionsbiologie hat ihren Ursprung in den Arbeiten von Charles Darwin und Alfred Wallace (Darwin 1963). Der gemeinsame Ausgangspunkt des Evolutionsgedanken ist dabei die Beobachtung, dass die biologische Welt nicht konstant ist. Biologische Systeme und alle darin lebenden Organismen unterliegen über längere Zeiträume hinweg einer stetigen Veränderung. Diese grundlegende Eigenschaft biologischer Systeme macht die Biologie zu einer historischen Wissenschaft und stellt einen wichtigen Gegensatz zu großen Teilen der Physik dar. Obwohl die Aussage von der Veränderlichkeit der Arten heute trivial klingt, war sie im 19. Jahrhundert eine Revolution, da die Konstanz der Arten und der Welt eine vorherrschende Stellung im damaligen Weltbild hatte (Amundson 2005).

  18. Regionalstatistik

    NASA Astrophysics Data System (ADS)

    Eppmann, Helmut; Fürnrohr, Michael

    Viele Aufgaben in Politik, Wirtschaft und Gesellschaft erfordern nicht nur globale, sondern auch regionale Lösungen. Die Regionalstatistik ist deshalb unentbehrlich für viele Planungs- und Entscheidungsprozesse. Ihren Ausbau und ihre Nutzung zu fördern, hat sich der Ausschuss für Regionalstatistik der Deutschen Statistischen Gesellschaft zum Ziel gesetzt. Dieses Kapitel stellt zunächst einige Grundlagen der Regionalstatistik und die Aufgaben des Ausschusses dar. Es folgen das umfangreiche regionalstatistische Datenangebot der Statistischen Ämter des Bundes und der Länder und seine Nutzung. Ein ergänzender Abschnitt ist der Arbeit des Instituts für Bau-, Stadt- und Raumforschung gewidmet. Das Kapitel schließt mit einem Ausblick auf die Weiterentwicklung des regionalstatistischen Datenangebotes aus Sicht der amtlichen Statistik.

  19. The Chain-Link Fence Model: A Framework for Creating Security Procedures

    ERIC Educational Resources Information Center

    Houghton, Robert F.

    2013-01-01

    A long standing problem in information technology security is how to help reduce the security footprint. Many specific proposals exist to address specific problems in information technology security. Most information technology solutions need to be repeatable throughout the course of an information systems lifecycle. The Chain-Link Fence Model is…

  20. Preparations for the New: Reaching and Teaching Creativity with Adaptive Technologies

    ERIC Educational Resources Information Center

    Jaeger, Garrett J.

    2016-01-01

    Educators are obliged to balance new resources with a healthy skepticism of change. This review of technological advances in creativity research highlights methods that scaffold both research and the students who stand to benefit from resultant findings. Educational technology need not lower its role to that of enabler. With proper guidance,…

  1. Instructors' Growth in TPACK: Teaching Technology-Infused Methods Courses to Preservice Teachers

    ERIC Educational Resources Information Center

    Foulger, Teresa S.; Buss, Ray R.; Wetzel, Keith; Lindsey, LeeAnn

    2015-01-01

    We were concerned about teaching a stand-alone technology integration course while advocating that teachers employ full integration. Our college moved to a tech-infusion model whereby our educational technology curriculum would be incorporated in methods courses. Using a qualitative approach, we documented experiences of teacher educators who were…

  2. Physical enviroment of 2-D animal cell aggregates formed in a short pathlength ultrasound standing wave trap.

    PubMed

    Bazou, Despina; Kuznetsova, Larisa A; Coakley, W Terence

    2005-03-01

    2-D mammalian cell aggregates can be formed and levitated in a 1.5 MHz single half wavelength ultrasound standing wave trap. The physical environment of cells in such a trap has been examined. Attention was paid to parameters such as temperature, acoustic streaming, cavitation and intercellular forces. The extent to which these factors might be intrusive to a neural cell aggregate levitated in the trap was evaluated. Neural cells were exposed to ultrasound at a pressure amplitude of 0.54 MPa for 30 s; a small aggregate had been formed at the center of the trap. The pressure amplitude was then decreased to 0.27 MPa for 2 min, at which level the aggregation process continued at a slower rate. The pressure amplitude was then decreased to 0.06 MPa for 1 h. Temperature measurements that were conducted in situ with a 200 microm thermocouple over a 30 min period showed that the maximum temperature rise was less than 0.5 K. Acoustic streaming was measured by the particle image velocimetry method (PIV). It was shown that the hydrodynamic stress imposed on cells by acoustic streaming is less than that imposed by gentle preparative centrifugation procedures. Acoustic spectrum analysis showed that cavitation activity does not occur in the cell suspensions sonicated at the above pressures. White noise was detected only at a pressure amplitude of 1.96 MPa. Finally, it was shown that the attractive acoustic force between ultrasonically agglomerated cells is small compared with the normal attractive van der Waals force that operates at close cell surface separations. It is concluded that the standing wave trap operates only to concentrate cells locally, as in tissue, and does not modify the in vitro expression of surface receptor interactions.

  3. Arzt und Hobby-Astronom in stürmischen Zeiten Der Büchernachlass des Doktor Johannes Häringshauser, Viertelsmedicus in Mistelbach (1630-1641) in der Melker Stiftsbibliothek.

    NASA Astrophysics Data System (ADS)

    Davison, Giles; Glaßner, Gottfried

    2009-06-01

    Auf der Suche nach astronomischer Literatur stieß Giles Davison in der Melker Stiftsbibliothek auf den Namen "Doctor Johannes Häringshauser“ als Besitzer seltener und interessanter astronomischer Werke u.a. von Johannes Regiomontan, Georg von Peuerbach, Michael Mästlin, Johannes Kepler und Daniel Sennert. Weitere in den Jahren 2007-2009 durchgeführte Nachforschungen ergaben, dass es sich um den von 1630-1641 in Mistelbach, Niederösterreich, als Landschaftsarzt tätigen Vater des Melker Konventualen und Bibliothekars Sigismund Häringshauser (1631-1698) handelt. Er wurde 1603 als Sohn des aus Magdeburg stammenden Apothekers Johannes Häringshauser geboren und starb 1642 in Mistelbach. Johannes Häringshauser Sen. bekleidete von 1613-1640 eine Reihe wichtiger Ämter in der Wiener Stadtregierung und starb 1647. Der Studienaufenthalt von Dr. Johannes Häringshauser Jun. in Padua (1624-1626) dürfte das Interesse für Astronomie geweckt haben, das sich in seiner in die Bestände der Melker Stiftsbibliothek eingegangenen Privatbibliothek widerspiegelt. Der Großteil der 10 dem Fachbereich der Astronomie und Astrologie zuzuweisenden Titel wurde von ihm in den Jahren 1636 und 1637 erworben.

  4. Umgang mit Antithrombotika bei Operationen an der Haut vor und nach Publikation der entsprechenden S3-Leitlinie.

    PubMed

    Gaskins, Matthew; Dittmann, Martin; Eisert, Lisa; Werner, Ricardo Niklas; Dressler, Corinna; Löser, Christoph; Nast, Alexander

    2018-03-01

    Laut einer Befragung im Jahre 2012 war der Umgang mit Antithrombotika bei dermatochirurgischen Eingriffen in Deutschland sehr heterogen. 2014 wurde erstmals eine evidenzbasierte Leitlinie zu diesem Thema veröffentlicht. Es wurde eine anonyme Befragung derselben Stichprobe zum Umgang mit Antithrombotika sowie zu Kenntnissen der Leitlinie durchgeführt. Die Ergebnisse wurden als relative Häufigkeiten berichtet und denen aus 2012 gegenübergestellt. 208 Antwortbögen wurden ausgewertet (Rücklaufquote: 36,6 %). Die große Mehrheit der Dermatologen erklärte, kleinere Eingriffe unter Fortführung der Therapie mit Phenprocoumon, niedrig dosierter Acetylsalicylsäure (≤ 100 mg) und Clopidogrel sowie mit direkten oralen Antikoagulanzien durchzuführen. Bei größeren Eingriffen war der Umgang hingegen weiterhin heterogen, insbesondere unter niedergelassenen Dermatologen. Der Anteil der Dermatologen, die Phenprocoumon, Acetylsalicylsäure und Clopidogrel leitlinienkonform verwendeten, hat sich insgesamt vergrößert. Führten 2012 beispielsweise 53,8 % der Klinikärzte bzw. 36,3 % der niedergelassenen Dermatologen eine große Exzision unter Fortführung der Therapie mit niedrig dosierter Acetylsalicylsäure durch, taten dies 2017 90,2 % bzw. 57,8 % (Phenprocoumon: 33,8 % bzw. 11,9 % auf 63,9 % bzw. 29,9 %; Clopidogrel: 36,9 % bzw. 23,2 % auf 63,9 % bzw. 30,6 %). Unter den Klinikärzten war ein hoher Anteil mit der Leitlinie vertraut und fand diese hilfreich. Eine Zunahme des leitlinienkonformen Verhaltens war bei allen Eingriffen zu verzeichnen. Bei größeren Eingriffen zeigte sich trotz deutlicher Verbesserung die Notwendigkeit verstärkter Anstrengungen zur Leitlinienumsetzung bzw. zur Identifizierung von Implementierungsbarrieren. © 2018 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  5. Structural Analysis of Der p 1–Antibody Complexes and Comparison with Complexes of Proteins or Peptides with Monoclonal Antibodies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Osinski, Tomasz; Pomés, Anna; Majorek, Karolina A.

    Der p 1 is a major allergen from the house dust mite, Dermatophagoides pteronyssinus, that belongs to the papain-like cysteine protease family. To investigate the antigenic determinants of Der p 1, we determined two crystal structures of Der p 1 in complex with the Fab fragments of mAbs 5H8 or 10B9. Epitopes for these two Der p 1–specific Abs are located in different, nonoverlapping parts of the Der p 1 molecule. Nevertheless, surface area and identity of the amino acid residues involved in hydrogen bonds between allergen and Ab are similar. The epitope for mAb 10B9 only showed a partialmore » overlap with the previously reported epitope for mAb 4C1, a cross-reactive mAb that binds Der p 1 and its homolog Der f 1 from Dermatophagoides farinae. Upon binding to Der p 1, the Fab fragment of mAb 10B9 was found to form a very rare α helix in its third CDR of the H chain. To provide an overview of the surface properties of the interfaces formed by the complexes of Der p 1–10B9 and Der p 1–5H8, along with the complexes of 4C1 with Der p 1 and Der f 1, a broad analysis of the surfaces and hydrogen bonds of all complexes of Fab–protein or Fab–peptide was performed. This work provides detailed insight into the cross-reactive and specific allergen–Ab interactions in group 1 mite allergens. The surface data of Fab–protein and Fab–peptide interfaces can be used in the design of conformational epitopes with reduced Ab binding for immunotherapy.« less

  6. Vernarbende Alopezien.

    PubMed

    Kanti, Varvara; Röwert-Huber, Joachim; Vogt, Annika; Blume-Peytavi, Ulrike

    2018-04-01

    Primär vernarbende Alopezien (PVA) werden nach der Klassifikation der North American Hair Research Society nach ihrem prominenten entzündlichen Infiltrat in vier Gruppen eingeteilt: PVA mit lymphozytärem, neutrophilem, gemischtzelligem oder unspezifischem Entzündungsmuster. Der Haarausfall kann subklinisch beginnen und langsam fortschreiten, so dass der genaue Erkrankungsbeginn oft schwer nachzuvollziehen ist. Die Diagnose wird häufig verzögert gestellt. Während die meisten vernarbenden Alopezien bei vollständiger Ausprägung anhand des klinischen Bildes klar zugeordnet werden können, ist die Diagnosestellung in der Frühphase oder im Endstadium häufig schwierig. Bei Erstvorstellung sollte eine ausführliche Anamnese und dermatologische Ganzkörperuntersuchung, inklusive Trichoskopie durchgeführt werden. In klinisch unklaren Fällen sollte eine Biopsie erfolgen. Aufgrund der Seltenheit der PVA gibt es bisher nur eine niedrige Evidenz über die Wirksamkeiten der Vielzahl der verschiedenen angewandten Therapien. Ziele der Therapie einer PVA sind, den Haarausfall zu stoppen oder zumindest zu verzögern, die klinischen Entzündungszeichen zu reduzieren, weitere Vernarbung zu verhindern sowie die subjektiven Symptome zu lindern. Ein Nachwachsen in bereits vernarbten Arealen sollte nicht erwartet werden. Eine antientzündliche Therapie mit topischen Kortikosteroiden der Klasse III-IV und/oder mit intrakutanen intraläsionalen Triamcinolonacetonid-Injektionen kommt bei den meisten PVA in Betracht. Die Wahl der systemischen Therapie hängt von der Art des prädominierenden entzündlichen Infiltrates ab und umfasst antimikrobielle/antibiotische oder immunmodulatorische/immunsuppressive Ansätze. Psychologische Unterstützung und Camouflage-Techniken sollten den Patienten angeboten werden. © 2018 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  7. The East-German Research Landscape in Transition. Part C. Research at East-German Universities

    DTIC Science & Technology

    1993-03-10

    Software-Systemlosungen fUr Aufgaben der Qualit ~ tssicherung und Pr~zisionsmeBtechnik. Beratung zur automatisierten ProzeBsteuerung und rechnergestUtzten... Qualit ~ tssicherung Beratung zu Schnittstellenproblemen und zur Lichtzeichentechnik Beratung zu Auswahl und Einsatz von metrischen Bi...49 (351) 463-2786 with seventeen institutes. C45.wp-09 05 MAR 93 #4350 DEPARTMENT FOR CIVIL ENGINEERING. WATER- AND FOREST TECHNOLOGY Fakult~t fUr Bau

  8. MONTE CARLO METHODS. A Bibliography covering the Period 1949 to June 1961

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kraft, R.; Wensrich, C.J.

    1961-09-11

    A partially annotated bibliography is presented containing 508 references to Monte Carlo methods, covering the period from 1947 to June 1961. The references are arranged alphabetically by author. The sources consulted include: Abstracts of Classified Reports; Applied Science and Technology Index; Armed Services Technical Information Agency; Bibliographic Index; Bibliographie der Fremsprachigen Zeitschrifften Literatur; Mathematical Reviews; Nuclear Science Abstracts; and Operations Research, an Annotated Bibliography. (T.F.H.)

  9. Probleme aus der Physik

    NASA Astrophysics Data System (ADS)

    Vogel, Helmut

    Das beliebte Arbeitsbuch "Probleme aus der Physik" bietet nun auch zur 17. Auflage von Gerthsen Vogel "Physik" (ISBN 3-540-56638-4) mit über 1150 gelösten Aufgaben aus der Physik und ihren Anwendungen in Technik, Astrophysik, Geound Biowissenschaften eine Fülle an Material zum Üben und Weiterlernen, zur Prüfungsvorbereitung und zum Selbststudium. Neu hinzugekommen ist ein Kapitel zur nichtlinearen Dynamik. Aufgaben aller Schwierigkeitsgrade machen "Probleme aus der Physik" unentbehrlich für Studenten der Physik im Haupt- und Nebenfach; Schüler der Leistungskurse Physik finden hier eine hervorragende Ergänzung.

  10. A Wireless Object Location Detector Enabling People with Developmental Disabilities to Control Environmental Stimulation through Simple Occupational Activities with Nintendo Wii Balance Boards

    ERIC Educational Resources Information Center

    Shih, Ching-Hsiang; Chang, Man-Ling

    2012-01-01

    The latest researches have adopted software technology, turning the Nintendo Wii Balance Board into a high performance standing location detector with a newly developed standing location detection program (SLDP). This study extended SLDP functionality to assess whether two people with developmental disabilities would be able to actively perform…

  11. Exploring Young Children's Understanding about the Concept of Volume through Engineering Design in a STEM Activity: A Case Study

    ERIC Educational Resources Information Center

    Park, Do-Yong; Park, Mi-Hwa; Bates, Alan B.

    2018-01-01

    This case study explores young children's understanding and application of the concept of volume through the practices of engineering design in a STEM activity. STEM stands for science, technology, engineering, and mathematics. However, engineering stands out as a challenging area to implement. In addition, most early engineering education…

  12. [Detection of mite allergens in the dust of filter-net and air of air-conditioned room].

    PubMed

    Lian, Yu-yin; Liu, Zhi-gang; Wang, Hong-yu; Chai, Cheng-yu; Liu, Xiao-yu

    2007-08-01

    To detect mite allergens in the dust of air conditioner filter-net and floating air in room. Samples were collected from rooms of asthma patient and normal families with or without air conditioner. Der p1, Der f1 and Der 2 were determined by two monoclonal antibody-based ELISA. In asthma patient families, the concentration of airborne Der p1, Der f1 and Der 2 was (0.23 +/- 0.13), (2.62 +/- 1.08), (0.93 +/- 0.41) ng/m3, and (0.56 +/- 0.25), (4.74 +/- 1.22), (2.33 +/- 0.64) ng/m3 respectively before and after the air conditioner switched on, all showing a significant difference (P < 0.05). In families without asthma patient, the concentration of Der p1, Der f1 and Der 2 was (0.33 +/- 0.11), (11.50 +/- 3.08) and (2.10 +/- 0.80) ng/m3, and (0.63 +/- 0.23), (19.80 +/- 4.30) and (3.60 +/- 1.00) ng/m3 respectively before and after the air conditioner switched on, also showing a significant difference (P < 0.05). From the filter-net dust of air conditioner in family with allergic asthma patient, the concentration of Der p1, Der f1 and Der 2 was (0.52 +/- 0.19), (3.34 +/- 0.63), (2.53 +/- 0.65) microg/g dust, while that of normal families was (1.30 +/- 0.35), (5.16 +/- 0.92), (3.47 +/- 1.13) microg/g dust respectively. The concentration of Der f1 and Der 2 at both asthma families and normal families was higher than 2 microg/g, an allergen concentration threshold. Mite allergens exist in the filter-net dust of air conditioner, which may be an important source of indoor allergens and a cause of the increasing prevalence of allergic asthma.

  13. Expression, purification and characterization of Der f 27, a new allergen from dermatophagoides farinae

    PubMed Central

    Lin, Jianli; Li, Meng; Liu, Yulin; Jiang, Congli; Wu, Yulan; Wang, Yuanyuan; Gao, Anjian; Liu, Zhigang; Yang, Pingchang; Liu, Xiaoyu

    2015-01-01

    The house dust mite (HDM), Dermatophagoidesfarinae (D. farina), is one of the most important indoor allergen sources and a major elicitor of allergic asthma; itscharacterization is important in the diagnosis and immunotherapy of mite allergen-relevant diseases. This study aims to characterize a novel allergen, the D. farinae-derived serpin (Der f 27). In this study, the total RNA of D. farinae was extracted, and the Der f 27 gene was cloned and expressed. The allergenicity of recombinant Der f 27 protein was determined by enzyme-linked immunosorbent assay, and Western-blotting with the sera of asthma patients, and skin prick test (SPT) in allergic human subjects. A r-Der f 27 allergic asthma mouse model was established. The cloned Der f 27 gene has been presented at the Gene Bank with an accession number of KM009995. The IgE levels of r-Der f 27 in the serum from r-Der f 27 SPT positive allergic patients were 3 folds more than healthy subjects. The Der f 27 SPT positive ratewas 42.1% in 19 DM-SPT positive patients. Airway hyperresponsiveness, serum specific IgE, and levels of interleukin-4 in the spleen cell culture supernatant were significantly increased in allergic asthma mice sensitized to r-Der f 27. In conclusion, Der f 27 is a new subtype of house mite allergen. PMID:26328010

  14. STF Optimierung von single-bit CT ΣΔ Modulatoren basierend auf skalierten Filterkoeffizienten

    NASA Astrophysics Data System (ADS)

    Widemann, C.; Zorn, C.; Brückner, T.; Ortmanns, M.; Mathis, W.

    2012-09-01

    Die vorliegende Arbeit beschäftigt sich mit dem Signalübertragungsverhalten von single-bit continuous-time (CT) ΣΔ Modulatoren. Dabei liegt der Fokus der Untersuchung auf dem Peaking der Signaltransferfunktion (STF). Dieser Effekt kann die Performance und die Stabilität des Gesamtsystems negativ beeinflussen, da bei auftretendem STF-Peaking Signale außerhalb des Signalbands verstärkt werden. In dieser Arbeit wird ein neuer Ansatz zur Reduktion des Peakings vorgestellt, der auf der Optimierung der Systemdynamik basiert. Dabei werden die Filterkoeffizienten des Modulators systematisch angepasst. Anhand eines Beispielsystems wird gezeigt, dass der Ansatz genutzt werden kann, um das Übertragungsverhalten des Modulators abhängig vom Ausgangssystem zu verändern. So kann entweder die Systemsperformance verbessert werden, ohne Peaking in der STF zu erzeugen, oder das STF-Peaking reduziert werden, ohne die Systemperformance stark zu beeinflussen.

  15. Digitalisierung als Inkubator für die Energieversorgung von morgen

    NASA Astrophysics Data System (ADS)

    Arnold, Christian; Postina, Matthias

    Neue Treiber der Digitalisierung bestimmen die Geschicke der etablierten Unternehmen im Energiebereich, dabei haben diese in vielen Fällen noch nicht einmal adäquat auf die altbekannten Treiber der Energiewende reagiert. Eine ganze Branche ist im Umbruch, alte Erlösmodelle brechen ein und Einigkeit scheint bei den Verantwortlichen nur in der Frage zu herrschen, wie in Zukunft noch Geld verdient werden kann. Dieser Beitrag erklärt die prägenden Treiber der Veränderung, analysiert die Ausgangslage und nennt Herausforderungen der Branche. Darüber hinaus legt er den Fokus auf die Betrachtung der neuen digitalen Wertschöpfung. Dazu wird ein Modell eingeführt, welches von der klassischen Wertschöpfungskette über datenbasierte Geschäftsmodelle im Energiesystem bis hin zum Internet of Smart Services reicht. Mit dem Modell geben die Autoren gleichsam Einblick in das geplante Energiewendeprojekt enera.

  16. Der neue Kosmos

    NASA Astrophysics Data System (ADS)

    Unsöld, Albrecht; Baschek, Bodo

    Astronomie, Astrophysik und Weltraumforschung haben innerhalb weniger Jahrzehnte eine geradezu explosive Entwicklung genommen. Die neuen Beobachtungsmöglichkeiten durch die Raumfahrt, die Entwicklung hochempfindlicher Lichtdetektoren und der Einsatz leistungsstarker Computer haben uns neuartige Aspekte in der faszinierenden Welt der Galaxien und Quasare, der Sterne und Planeten erschlossen. Nachdem die dritte Auflage vergriffen ist, trägt die vorliegende vierte, völlig neubearbeitete Auflage des NEUEN KOSMOS dieser stürmischen Entwicklung Rechnung. In überschaubarem Umfang wird - bei bescheidenen Ansprüchen an die mathematisch-naturwissenschaftliche Vorbildung des Lesers - eine zusammenhängende Einführung in das Gesamtgebiet der Astronomie und Astrophysik gegeben, welche die Beobachtungen und die Grundgedanken ihrer theoretischen Deutung in gleicher Weise berücksichtigt. Auch in seiner neuen Gestalt wird der NEUE KOSMOS den Studenten und Forschern in Bereichen der Astronomie, Physik und Geowissenschaften sowie einem weiten Kreis ernsthaft interessierter Amateure viel Neues und viel Freude bringen.

  17. Quantitative Characterization of Molecular Similarity Spaces: Tools for Computational Toxicology

    DTIC Science & Technology

    2000-01-20

    numbers for hydrogen-filled molecular structure, hydrogen-suppressed molecular structure, and van der Waals volume. Van der Waals...relative covalent radii Geometrical Vw van der Waals volume 3DW 3-D Wiener number for the hydrogen-suppressed geometric distance matrix...molecular structure, and van der Waals volume. Van der Waals volume, Vw (Bondi 1964). was calculated using Sybyl 6.1 from Tripos As- sociates. Inc

  18. Educational Technology Research in a VUCA World

    ERIC Educational Resources Information Center

    Reeves, Thomas C.; Reeves, Patricia M.

    2015-01-01

    The status of educational technology research in a VUCA world is examined. The acronym, VUCA, stands for "Volatility" (rapidly changing contexts and conditions), "Uncertainty" (information missing that is critical to problem solving), "Complexity" (multiple factors difficult to categorize or control), and…

  19. Microgrid Selection and Operation for Commercial Buildings in California and New York States

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Environmental Energy Technologies Division; Lacommare, Kristina S H; Marnay, Chris

    The addition of storage technologies such as lead-acid batteries, flow batteries, or heat storage can potentially improve the economic and environmental attractiveness of on-site generation such as PV, fuel cells, reciprocating engines or microturbines (with or without CHP), and can contribute to enhanced demand response. Preliminary analyses for a Californian nursing home indicate that storage technologies respond effectively to time-varying electricity prices, i.e., by charging batteries during periods of low electricity prices and discharging them during peak hours. While economic results do not make a compelling case for storage, they indicate that storage technologies significantly alter the residual load profile,more » which may lower carbon emissions as well as energy costs depending on the test site, its load profile, and DER technology adoption.« less

  20. Test stand for Titan 34D SRM static firing

    NASA Technical Reports Server (NTRS)

    Glozman, Vladimir; Shipway, George

    1988-01-01

    An existing liquid engine test stand at the AF Astronautics Laboratory was refurbished and extensively modified to accommodate the static firing of the Titan 34D solid rocket motor (SRM) in the vertical nozzle down orientation. The main load restraint structure was designed and built to secure the SRM from lifting off during the firing. In addition, the structure provided weather protection, temperature conditioning of the SRM, and positioning of the measurement and recording equipment. The structure was also used for stacking/de-stacking of SRM segments and other technological processes. The existing stand, its foundation and anchorage were thoroughly examined and reanalyzed. Necessary stand modifications were carried out to comply with the requirements of the Titan 34D SRM static firing.

  1. Quantitative Analyse und Visualisierung der Herzfunktionen

    NASA Astrophysics Data System (ADS)

    Sauer, Anne; Schwarz, Tobias; Engel, Nicole; Seitel, Mathias; Kenngott, Hannes; Mohrhardt, Carsten; Loßnitzer, Dirk; Giannitsis, Evangelos; Katus, Hugo A.; Meinzer, Hans-Peter

    Die computergestützte bildbasierte Analyse der Herzfunktionen ist mittlerweile Standard in der Kardiologie. Die verfügbaren Produkte erfordern meist ein hohes Maß an Benutzerinteraktion und somit einen erhöhten Zeitaufwand. In dieser Arbeit wird ein Ansatz vorgestellt, der dem Kardiologen eine größtenteils automatische Analyse der Herzfunktionen mittels MRT-Bilddaten ermöglicht und damit Zeitersparnis schafft. Hierbei werden alle relevanten herzphysiologsichen Parameter berechnet und mithilfe von Diagrammen und Graphen visualisiert. Diese Berechnungen werden evaluiert, indem die ermittelten Werte mit manuell vermessenen verglichen werden. Der hierbei berechnete mittlere Fehler liegt mit 2,85 mm für die Wanddicke und 1,61 mm für die Wanddickenzunahme immer noch im Bereich einer Pixelgrösse der verwendeten Bilder.

  2. PubMed

    Hachenberg, Thomas; Kols, Kerstin

    2018-04-01

    Schlichtungsstellen für Arzthaftpflichtfragen bieten Patienten, Ärzten und Versicherern eine Möglichkeit, Arzthaftungsstreitigkeiten außergerichtlich zu klären. In der Rubrik „Fälle der Schlichtungsstelle“ stellen wir abgeschlossene Fälle aus der Schlichtungsstelle für Arzthaftpflichtfragen der norddeutschen Ärztekammern vor.

  3. Einleitung

    NASA Astrophysics Data System (ADS)

    Ha, Suk-Woo

    Der Einsatz von Implantaten zielt auf die Unterstützung oder den Ersatz von Zelloder Gewebefunktionen im menschlichen Körper. Die Werkstoffauswahl für diese Implantate hängt dabei von der Art und der Funktion des zu ersetzenden Gewebes ab. Die Anforderungen an den Implantatwerkstoff bezüglich Eigenschaften und Struktur können je nach Implantationsort und Funktionalität ganz unterschiedlich sein. Implantate, die im Knochengewebe Funktionen der Lasteinleitung und -überleitung ausüben, sind hohen mechanischen Anforderungen (optimale Bauteilsteifigkeit, Dauerfestigkeit) unterworfen, während bei Blutgefässimplantaten die Werkstoffoberfläche, primär in ihrer chemischen Zusammensetzung derart gestaltet sein muss, dass eine minimale Thrombogenität resultiert. Für den Erfolg des Implantatwerkstoffes oder -bauteils sind folgende drei Faktoren relevant: (a) Biokompatibilität, (b) Gesundheitszustand des Patienten und (c) Verlauf der Operation und der nachfolgenden Therapie. Bei Vorliegen einer Erkrankung, wie z. B. die allergische Sensibilisierung gegenüber Metallionen (Nickelallergie) oder Osteoporose im Fall der Verankerung von Hüftprothesen, ist der Implantatwerkstoff höheren Anforderungen bezüglich der Biokompatibilität unterworfen als bei organisch gesunden Patienten.

  4. Schönheit und andere Provokationen - Eine neue evolutionsbiologische Theorie der Kunst

    NASA Astrophysics Data System (ADS)

    Junker, Thomas

    Die Evolution hat viele spektakuläre Phänomene hervorgebracht - von der Eleganz des Vogelflugs über die gigantischen Körper der Dinosaurier und die farbenprächtige Vielfalt der Korallenriffe bis hin zu ihrem jüngsten Geniestreich - der menschlichen Kunst. Die schönen Künste - Malerei, Bildhauerei und Architektur, Theater, Tanz, Oper und Filmkunst, Musik und Literatur - Produkte der Evolution? Diese Vorstellung mutet vielen Menschen fremd an, aber wie könnte es anders sein? Denn wenn Charles Darwin recht hat, dann sind nicht nur die körperlichen Merkmale der Menschen als Antworten auf die Erfordernisse des Lebens entstanden, sondern auch ihre geistigen Fähigkeiten und Verhaltensweisen. Im Jahr 1859 hatte er auf den letzten Seiten seines berühmten Buches über die Entstehung der Arten eine kühne Prophezeiung gemacht: Durch die Evolutionstheorie werde es "zu einer bemerkenswerten Revolution in der Naturwissenschaft kommen […]. Die Psychologie wird auf die neue Grundlage gestellt, dass jede geistige Kraft und Fähigkeit notwendigerweise durch graduelle Übergänge erworben wird“ (Darwin 1859, S. 484, 488; Junker 2008).

  5. Distributed generation capabilities of the national energy modeling system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    LaCommare, Kristina Hamachi; Edwards, Jennifer L.; Marnay, Chris

    2003-01-01

    This report describes Berkeley Lab's exploration of how the National Energy Modeling System (NEMS) models distributed generation (DG) and presents possible approaches for improving how DG is modeled. The on-site electric generation capability has been available since the AEO2000 version of NEMS. Berkeley Lab has previously completed research on distributed energy resources (DER) adoption at individual sites and has developed a DER Customer Adoption Model called DER-CAM. Given interest in this area, Berkeley Lab set out to understand how NEMS models small-scale on-site generation to assess how adequately DG is treated in NEMS, and to propose improvements or alternatives. Themore » goal is to determine how well NEMS models the factors influencing DG adoption and to consider alternatives to the current approach. Most small-scale DG adoption takes place in the residential and commercial modules of NEMS. Investment in DG ultimately offsets purchases of electricity, which also eliminates the losses associated with transmission and distribution (T&D). If the DG technology that is chosen is photovoltaics (PV), NEMS assumes renewable energy consumption replaces the energy input to electric generators. If the DG technology is fuel consuming, consumption of fuel in the electric utility sector is replaced by residential or commercial fuel consumption. The waste heat generated from thermal technologies can be used to offset the water heating and space heating energy uses, but there is no thermally activated cooling capability. This study consists of a review of model documentation and a paper by EIA staff, a series of sensitivity runs performed by Berkeley Lab that exercise selected DG parameters in the AEO2002 version of NEMS, and a scoping effort of possible enhancements and alternatives to NEMS current DG capabilities. In general, the treatment of DG in NEMS is rudimentary. The penetration of DG is determined by an economic cash-flow analysis that determines adoption based on the n umber of years to a positive cash flow. Some important technologies, e.g. thermally activated cooling, are absent, and ceilings on DG adoption are determined by some what arbitrary caps on the number of buildings that can adopt DG. These caps are particularly severe for existing buildings, where the maximum penetration for any one technology is 0.25 percent. On the other hand, competition among technologies is not fully considered, and this may result in double-counting for certain applications. A series of sensitivity runs show greater penetration with net metering enhancements and aggressive tax credits and a more limited response to lowered DG technology costs. Discussion of alternatives to the current code is presented in Section 4. Alternatives or improvements to how DG is modeled in NEMS cover three basic areas: expanding on the existing total market for DG both by changing existing parameters in NEMS and by adding new capabilities, such as for missing technologies; enhancing the cash flow analysis but incorporating aspects of DG economics that are not currently represented, e.g. complex tariffs; and using an external geographic information system (GIS) driven analysis that can better and more intuitively identify niche markets.« less

  6. Linear relationship between water wetting behavior and microscopic interactions of super-hydrophilic surfaces.

    PubMed

    Liu, Jian; Wang, Chunlei; Guo, Pan; Shi, Guosheng; Fang, Haiping

    2013-12-21

    Using molecular dynamics simulations, we show a fine linear relationship between surface energies and microscopic Lennard-Jones parameters of super-hydrophilic surfaces. The linear slope of the super-hydrophilic surfaces is consistent with the linear slope of the super-hydrophobic, hydrophobic, and hydrophilic surfaces where stable water droplets can stand, indicating that there is a universal linear behavior of the surface energies with the water-surface van der Waals interaction that extends from the super-hydrophobic to super-hydrophilic surfaces. Moreover, we find that the linear relationship exists for various substrate types, and the linear slopes of these different types of substrates are dependent on the surface atom density, i.e., higher surface atom densities correspond to larger linear slopes. These results enrich our understanding of water behavior on solid surfaces, especially the water wetting behaviors on uncharged super-hydrophilic metal surfaces.

  7. Gay fathers in straight marriages.

    PubMed

    Büntzly, G

    1993-01-01

    The author bases his conclusions about gay parenthood on anecdotal evidence gathered from about 100 gay German fathers. First he notes how the religious ethic that surrounds the nuclear family stands in the way of a father's awareness and expression of his homosexual desires. Like van der Geest, he reports that many women are attracted to gay men and proceed to marry them. After coming to realize that husbands' homosexual affairs are transitory and do not constitute a serious challenge to marital and family bonds, a few couples have been able to preserve their marriages. In most cases the marriages collapse under the combined pressures of wife and gay lover both claiming exclusive proprietorship: "the 'love triangle' can rarely be closed." The author laments the existence of all-male gay communities that ignore the existence of females and force gay husbands and fathers to choose against marriage and parenthood.

  8. Scanning Tunneling Microscopy Observation of Phonon Condensate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Altfeder, Igor; Balatsky, Alexander V.; Voevodin, Andrey A.

    Using quantum tunneling of electrons into vibrating surface atoms, phonon oscillations can be observed on the atomic scale. Phonon interference patterns with unusually large signal amplitudes have been revealed by scanning tunneling microscopy in intercalated van der Waals heterostructures. Our results show that the effective radius of these phonon quasi-bound states, the real-space distribution of phonon standing wave amplitudes, the scattering phase shifts, and the nonlinear intermode coupling strongly depend on the presence of defect-induced scattering resonance. The observed coherence of these quasi-bound states most likely arises from phase- and frequency-synchronized dynamics of all phonon modes, and indicates the formationmore » of many-body condensate of optical phonons around resonant defects. We found that increasing the strength of the scattering resonance causes the increase of the condensate droplet radius without affecting the condensate fraction inside it. The condensate can be observed at room temperature.« less

  9. Scanning Tunneling Microscopy Observation of Phonon Condensate

    PubMed Central

    Altfeder, Igor; Voevodin, Andrey A.; Check, Michael H.; Eichfeld, Sarah M.; Robinson, Joshua A.; Balatsky, Alexander V.

    2017-01-01

    Using quantum tunneling of electrons into vibrating surface atoms, phonon oscillations can be observed on the atomic scale. Phonon interference patterns with unusually large signal amplitudes have been revealed by scanning tunneling microscopy in intercalated van der Waals heterostructures. Our results show that the effective radius of these phonon quasi-bound states, the real-space distribution of phonon standing wave amplitudes, the scattering phase shifts, and the nonlinear intermode coupling strongly depend on the presence of defect-induced scattering resonance. The observed coherence of these quasi-bound states most likely arises from phase- and frequency-synchronized dynamics of all phonon modes, and indicates the formation of many-body condensate of optical phonons around resonant defects. We found that increasing the strength of the scattering resonance causes the increase of the condensate droplet radius without affecting the condensate fraction inside it. The condensate can be observed at room temperature. PMID:28225066

  10. Scanning Tunneling Microscopy Observation of Phonon Condensate

    DOE PAGES

    Altfeder, Igor; Balatsky, Alexander V.; Voevodin, Andrey A.; ...

    2017-02-22

    Using quantum tunneling of electrons into vibrating surface atoms, phonon oscillations can be observed on the atomic scale. Phonon interference patterns with unusually large signal amplitudes have been revealed by scanning tunneling microscopy in intercalated van der Waals heterostructures. Our results show that the effective radius of these phonon quasi-bound states, the real-space distribution of phonon standing wave amplitudes, the scattering phase shifts, and the nonlinear intermode coupling strongly depend on the presence of defect-induced scattering resonance. The observed coherence of these quasi-bound states most likely arises from phase- and frequency-synchronized dynamics of all phonon modes, and indicates the formationmore » of many-body condensate of optical phonons around resonant defects. We found that increasing the strength of the scattering resonance causes the increase of the condensate droplet radius without affecting the condensate fraction inside it. The condensate can be observed at room temperature.« less

  11. Saturn Apollo Program

    NASA Image and Video Library

    1967-01-01

    This photograph is a view of the Saturn V S-IC (first) test stage being hoisted into the S-IC-B1 test stand at the Mississippi Test Facility (MTF), Bay St. Louis, Mississippi. This stage was used to prove the operational readiness of the stand. Begirning operations in 1966, the MTF has two test stands; a dual-position structure for running the S-IC stage at full throttle, and two separate stands for the S-II (Saturn V third) stage. It became the focus of the static test firing program. The completed S-IC stage was shipped from the Michoud Assembly Facility (MAF) to the MTF. The stage was then installed into the 124-meter-high test stand for static firing tests before shipment to the Kennedy Space Center for final assembly of the Saturn V vehicle. The MTF was renamed to the National Space Technology Laboratory (NSTL) in 1974 and later to the Stennis Space Center (SSC) in May 1988.

  12. Geschichtlicher Überblick

    NASA Astrophysics Data System (ADS)

    Bölke, Klaus-Peter

    Die Nachweise einer schadlosen Ableitung von Abwässern lassen sich bis weit in die Vergangenheit zurückverfolgen. Sie waren bereits zur damaligen Zeit eine Forderung zur Pflege der öffentlichen Reinlichkeit. Der Kanalisationsbau ist auch immer ein Ausdruck der Kultur eines Volkes gewesen. So kann festgestellt werden, dass im Zusammenhang mit der Hochkultur eines Volkes auch der Kanalbau ein vorherrschendes Thema war. Der Kanalbau steht auch in einem engen Zusammenhang mit dem Wasserleitungsbau. Es ist nur logisch, dass dort wo Wasser teilweise aus großer Entfernung herangeführt worden ist, dieses dann nach Gebrauch auch wieder schadlos beseitigt werden musste.

  13. Herausforderungen durch die deutsche Wiedervereinigung

    NASA Astrophysics Data System (ADS)

    Stäglin, Reiner

    Die Wiedervereinigung stellte auch die Statistik vor große Aufgaben. Die als Organ der staatlichen Planung staatsnah orientierte Statistik der DDR musste auf das zur Neutralität und wissenschaftlichen Unabhängigkeit verpflichtete System der Bundesrepublik umgestellt werden. Ebenso verlangten die Universitäten eine Neuorientierung. Die Deutsche Statistische Gesellschaft hat sich vor allem dreier Aufgaben mit großem Engagement, aber auch mit Bedachtsamkeit angenommen: Aufnahme und Integration der Statistiker aus den neuen Bundesländern in die Gesellschaft, Begleitung der Neuausrichtung des Faches Statistik an deren Hochschulen und Sicherung sowie Nutzung von Datenbeständen der ehemaligen DDR.

  14. Phänomenologische Grundlagen der Wärmelehre

    NASA Astrophysics Data System (ADS)

    Heintze, Joachim

    Die Physik der Wärme lässt sich auf zweierlei Weise formulieren: Einmal als Mechanik eines Systems, das eine enorm große Zahl von Teilchen enthält (statistische Mechanik), und einmal mit Hilfe von ad hoc eingeführten Größen, den sogenannten Zustandsgrößen, die geeignet sind, das Verhalten eines solchen Systems zu beschreiben, ohne dass man die Teilchen selbst und ihre Bewegungen betrachten muss (Thermodynamik). Wir werden beide Ansätze in ihrer einfachsten und anschaulichsten Ausprägung in Kap. 5 (kinetische Gastheorie) bzw. in Kap. 8 (Grundbegriffe der Thermodynamik) behandeln. Obgleich sich die volle Durchführung des Programms als begrifflich und mathematisch recht schwierig erweist - die Vorlesung "Thermodynamik und Statistik" steht gewöhnlich am Ende der Kursvorlesungen über theoretische Physik - werden wir doch auf der Grundlage der Kap. 5 und 8 eine Menge über die Physik der Wärme lernen können. Den Ausgangspunkt der Wärmelehre bilden jedoch allemal die Naturerscheinungen, die wir hier in Kap. 4 behandeln wollen: Wärme, Kälte, Temperaturausgleich. Wir werden untersuchen, wie man diese Begriffe quantifizieren kann, und was bei der Erwärmung oder Abkühlung eines Körpers vor sich geht. Dabei werden wir auf den I. und II. Hauptsatz der Wärmelehre stoßen.

  15. [Not Available].

    PubMed

    Hainschitz, I; Rieger, K; Siegl, H

    2002-06-01

    In Austria an index of 3 μg/kg of Ochratoxin A for coffee, 0,3 μg/kg for fruit juices and 0,2 μg/kg for beer is discussed. The laboratory of the food inspection authority of the state of Vorarlberg investigated the contribution of selected foodstuffs to the daily OTA intake and compared it with the recommendation of the scientific food committee of the EC. The focal point of this study was on beverages (coffee, coffee substitutes, beer and fruit juices) and their ingredients.ZUSAMMENFASSUNG: Die Untersuchungsergebnisse von Bier, Fruchtsaft und Kaffee [Diagramm 1] zeigen, dass die Mehrzahl der Proben nur sehr schwach bis gar nicht belastet waren. Die OTA-Belastung lag bei der Mehrzahl der Proben unter der Nachweisgrenze von 0,3 μg/kg bzw. 0,01μg/1. Einzelne Proben waren aber erheblich belastet, sodass bei starkem Konsum (Fruchtsaft im Sommer) eine überschreitung der vom SCF vorgeschlagenen Höchstmenge nicht auszuschließen ist. Die Ergebnisse der Kaffeemitteluntersuchung [Diagramm 2] belegen eine höhere OTA-Belastung bei mehr als der Hälfte der Proben. Wenn die vom SCF vorgeschlagene Höchstaufnahme von 5 ng pro Tag und kg Körpergewicht zu Grunde gelegt wird, resultiert für eine 60 kg schwere Person ein Wert von 0,3 μg/Tag. Das bedeutet bei einem mit 100 μg/kg OTA kontaminierten Kaffeeersatz und dem Konsum nur einer Tasse (5 - 7 g Pulver), dass alleine aus dieser Quelle diese Höchstaufnahme deutlich überschritten wird. Der Eintrag über die restliche Nahrung wie Cerealien, die für etwa die Hälfte der OTA-Aufnahme verantwortlich sind, bleibt hier unberücksichtigt. Die Untersuchungen belegen, dass die Einhaltung der in österreich vorgeschlagenen Richtwerte bei Bier, Fruchtsäften und Kaffee keine Schwierigkeiten bereitet. Für Kaffeemittel und andere Trockenfrüchte als Weintrauben [3] wurde allerdings noch kein Richtwert vorgeschlagen. Die Ergebnisse belegen aber, dass gerade für Kaffemittel und verschiedene Trockenfrüchte vor dem Hintergrund fehlender Höchstwerte ein Richtwert in der Größenordnung von 3 μg/kg bzw. 10 μg/kg hilfreich wäre, bis die Festlegung der gemeinschaftsrechtlicher Höchstgehalte erfolgt. Mit Hinblick auf die in der Einleitung beschriebene toxische Wirkung von OTA ist es im Sinne eines vorbeugenden Verbraucherschutzes wichtig, diese hochbelasteten Chargen zu erkennen und aus dem Verkehr zu nehmen. Ursache für die OTA-Kontamination ist vor allem eine mangelhafte Produktionshygiene in den Erzeugerländern. Dort liegt auch das größte Potential für eine Verringerung der OTA-Belastung. Die überprüfung der Lebensmittel auf Ochratoxin A durch die amtliche Lebensmittelkontrolle ist ein notwendiger Beitrag zum Schutz der öffentlichen Gesundheit und zur weiteren Reduktion der Aufnahme.

  16. Kombinierte Hoch-/Niedrig-Dosis-Therapie mit systemischen Glukokor-tikoiden bei schweren Verlaufsformen der Alopecia areata im Kindesalter.

    PubMed

    Jahn-Bassler, Karin; Bauer, Wolfgang Michael; Karlhofer, Franz; Vossen, Matthias G; Stingl, Georg

    2017-01-01

    Schwere Verlaufsformen der Alopecia areata (AA) im Kindesalter sind aufgrund limitierter Optionen therapeutisch herausfordernd. Systemische, hochdosierte Glukokortikoide weisen die schnellste Ansprechrate auf, nach dem Absetzen kommt es allerdings zu Rezidiven. Eine längerfristige Hochdosis-Anwendung ist aufgrund der zu erwartenden Nebenwirkungen nicht empfehlenswert. Eine dauerhafte Steroiderhaltungstherapie unterhalb der Cushing-Schwellen-Dosis nach Bolustherapie könnte die Krankheitsaktivität ohne Nebenwirkungen längerfristig unterdrücken. Im Rahmen einer offenen Anwendungsbeobachtung wurden 13 Kinder mit schweren Formen der AA in diese Studie eingeschlossen. Bei sieben Kindern lag eine AA totalis/universalis vor, bei sechs eine multifokale AA mit Befall von mehr als 50 % der Kopfhaut. Das Therapieregime sah eine initiale Prednisolon-Dosierung von 2 mg/kg Körpergeweicht (KG) vor und wurde innerhalb von neun Wochen auf eine Erhaltungsdosierung unter der individuellen Cushing-Schwelle reduziert. Der Nachbeobachtungszeitraum betrug ein bis drei Jahre. Wir beobachteten in 62 % aller Fälle ein komplettes Nachwachsen der Haare. Die mittlere Dauer bis zum Ansprechen lag bei 6,6 Wochen und konnte mit der Erhaltungstherapie über den gesamten Beobachtungszeitraum aufrechterhalten werden. An Nebenwirkungen wurden ausschließlich eine Gewichtszunahme (1-3 kg) bei allen Behandelten sowie eine milde Steroidakne in 23 % der Fälle beobachtet. Die kombinierte Hoch-/Niedrig-Dosis-Therapie mit systemischen Glukokortikoiden mittels Prednisolon zeigte eine hohe, dauerhafte Ansprechrate ohne signifikante Nebenwirkungen. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  17. Classroom Technology: Where Schools Stand. Technology Counts, 2017. Education Week. Volume 36, Issue 35

    ERIC Educational Resources Information Center

    Bushweller, Kevin C., Ed.

    2017-01-01

    This report, the 20th edition of "Technology Counts," examines how schools are tackling tech training for teachers, "passive" vs. "active" use of digital tools, and online learning needs. Contents include: (1) Tracking 20 Years of Change in Ed Tech (Kevin C. Bushweller); (2) Poor Students Face Digital Divide in How…

  18. Optimizing technology investments: a broad mission model approach

    NASA Technical Reports Server (NTRS)

    Shishko, R.

    2003-01-01

    A long-standing problem in NASA is how to allocate scarce technology development resources across advanced technologies in order to best support a large set of future potential missions. Within NASA, two orthogonal paradigms have received attention in recent years: the real-options approach and the broad mission model approach. This paper focuses on the latter.

  19. A Theoretical Framework to Guide the Re-Engineering of Technology Education

    ERIC Educational Resources Information Center

    Kelley, Todd; Kellam, Nadia

    2009-01-01

    Before leaders in technology education are able to identify a theoretical framework upon which a curriculum is to stand, they must first grapple with two opposing views of the purpose of technology education--education for all learners or career/technical education. Dakers (2006) identifies two opposing philosophies that can serve as a framework…

  20. Technology: Technology and Common Sense

    ERIC Educational Resources Information Center

    Van Horn, Royal

    2004-01-01

    The absence of common sense in the world of technology continues to amaze the author. Things that seem so logical to just aren nott for many people. The installation of Voice-over IP (VoIP, with IP standing for Internet Protocol) in many school districts is a good example. Schools have always had trouble with telephones. Many districts don't even…

  1. The Innovative Technology Deployment (ITD)/ Commercial Vehicle Information Systems and Networks (CVISN) Program, 2016 annual report.

    DOT National Transportation Integrated Search

    2017-06-01

    On December 4, 2015, the Fixing Americas Surface Transportation Act, 2015 (FAST Act) (Pub. L. 114-94) established the Innovative Technology Deployment (ITD) Grant Program, replacing the long-standing Commercial Vehicle Information Systems and Netw...

  2. National Institute of Standards and Technology (NIST) cybersecurity risk management framework applied to modern vehicles

    DOT National Transportation Integrated Search

    2014-10-01

    The primary objective of the work described in this report is to review the National Institute of Science and Technology (NIST) guidelines and foundational publications from an automotive : cybersecurity risk management stand-point. The NIST approach...

  3. Building Digital Libraries: Running to Stand Still?

    ERIC Educational Resources Information Center

    Huwe, Terence K.

    2005-01-01

    Technostress--the challenge of keeping up with changing technology--has been one of the few constants in professional lives for the past 30 or more years. In this paper, the author addresses what constitutes "best practices" for keeping up with rapidly changing technology.

  4. Herausforderungen für künftige Lernumgebungen am Beispiel der Fakultät für Medizin

    NASA Astrophysics Data System (ADS)

    Gergintchev, Ivan; Graf, Stephan

    Nach der weit reichenden Etablierung von eLearning in den letzten Jahren stehen nahezu alle deutschen Hochschulen vor der Aufgabe, wettbewerbsfähige hochschulübergreifende Mechanismen sowie entsprechende organisatorische Rahmenbedingungen zu schaffen. Vor allem die Umsetzung von EBologna und die Unterstützung kooperativer Bildungsangebote verstärken diese Notwendigkeit. Motiviert durch die Veränderungen im Bereich der Hochschullehre und die Herausforderungen für künftige Lernumgebungen schlagen wir eine Integrationslösung im Sinne eines Learning Gateway vor, die zur webgestützten Abwicklung von kooperativen Bildungsangeboten in heterogen Lernumgebungen eingesetzt werden kann. Ihre Praxisanwendung verdeutlichen wir anschließend im komplexen Szenario der Medizin an der TUM. Die Evaluierung der Umsetzung belegt den deutlichen Mehrwert des Ansatzes.

  5. elecTUM: Umsetzung der eLearning-Strategie der Technischen Universität München

    NASA Astrophysics Data System (ADS)

    Rathmayer, Sabine; Gergintchev, Ivan

    An der TUM wurde ein umfassendes und integriertes eLearning-Konzept umgesetzt, welches Präsenzstudium und eLearning in allen Leistungsbereichen der Universität miteinander verzahnt. Ein besonderer Schwerpunkt lag dabei in der Schaffung einer effizienten und wettbewerbsfähigen integrierten eLearning Infrastruktur in Hinblick auf die noch weiter steigenden Studienanfängerzahlen ab dem Jahr 2011 sowie die Umsetzung von eBologna. Die Etablierung einer hochschulweiten Lernplattform stellte eine wesentliche Basis für die Umsetzung der eLearning-Strategie dar. Die wissenschaftliche und wirtschaftliche Anschlussfähigkeit im Hinblick auf eine Verwertung der Projektergebnisse wurde durch die aktive Beteiligung an einer Vielzahl hochschulübergreifender Arbeitskreise, Fachtagungen und Kooperationen, vor allem über Organisations- und Dienstleistungsmodelle sowie innovative technische Entwicklungen, sichergestellt.

  6. Viele Tests - viele Fehler?

    NASA Astrophysics Data System (ADS)

    Tabelow, Karsten

    Bildgebende Verfahren haben sich in den letzten Jahren einen festen Platz in der Medizin erobert und die medizinische Forschung und Diagnostik revolutioniert. Sie ermöglichen Ärzten und Forschern einen Einblick in lebendes Gewebe. Mit der fortschreitenden technischen Entwicklung liefern die Verfahren immer höhere Auflösungen, schärfere Bilder und mehr Details. Bildgebende Verfahren sind ohne Mathematik undenkbar, von der Bildrekonstruktion aus den gemessenen Signalen, bis hin zur Auswertung der Bildinformation. Für die Analyse der großen Menge an Bilddatenpunkten (Voxel, volume element, im Gegensatz zum zweidimensionalen Pixel, picture element) werden häufig insbesondere Methoden der mathematischen Statistik benötigt. Zufällige Fehler in der Messung äußern sich als Bildrauschen, die Bilder wirken unscharf und gestört. Dadurch werden diagnostische Entscheidungen erschwert.

  7. Observing Imperfection in Atomic Interfaces for van der Waals Heterostructures.

    PubMed

    Rooney, Aidan P; Kozikov, Aleksey; Rudenko, Alexander N; Prestat, Eric; Hamer, Matthew J; Withers, Freddie; Cao, Yang; Novoselov, Kostya S; Katsnelson, Mikhail I; Gorbachev, Roman; Haigh, Sarah J

    2017-09-13

    Vertically stacked van der Waals heterostructures are a lucrative platform for exploring the rich electronic and optoelectronic phenomena in two-dimensional materials. Their performance will be strongly affected by impurities and defects at the interfaces. Here we present the first systematic study of interfaces in van der Waals heterostructure using cross-sectional scanning transmission electron microscope (STEM) imaging. By measuring interlayer separations and comparing these to density functional theory (DFT) calculations we find that pristine interfaces exist between hBN and MoS 2 or WS 2 for stacks prepared by mechanical exfoliation in air. However, for two technologically important transition metal dichalcogenide (TMDC) systems, MoSe 2 and WSe 2 , our measurement of interlayer separations provide the first evidence for impurity species being trapped at buried interfaces with hBN interfaces that are flat at the nanometer length scale. While decreasing the thickness of encapsulated WSe 2 from bulk to monolayer we see a systematic increase in the interlayer separation. We attribute these differences to the thinnest TMDC flakes being flexible and hence able to deform mechanically around a sparse population of protruding interfacial impurities. We show that the air sensitive two-dimensional (2D) crystal NbSe 2 can be fabricated into heterostructures with pristine interfaces by processing in an inert-gas environment. Finally we find that adopting glovebox transfer significantly improves the quality of interfaces for WSe 2 compared to processing in air.

  8. Ultrafast Exciton Dissociation and Long-Lived Charge Separation in a Photovoltaic Pentacene-MoS2 van der Waals Heterojunction.

    PubMed

    Bettis Homan, Stephanie; Sangwan, Vinod K; Balla, Itamar; Bergeron, Hadallia; Weiss, Emily A; Hersam, Mark C

    2017-01-11

    van der Waals heterojunctions between two-dimensional (2D) layered materials and nanomaterials of different dimensions present unique opportunities for gate-tunable optoelectronic devices. Mixed-dimensional p-n heterojunction diodes, such as p-type pentacene (0D) and n-type monolayer MoS 2 (2D), are especially interesting for photovoltaic applications where the absorption cross-section and charge transfer processes can be tailored by rational selection from the vast library of organic molecules and 2D materials. Here, we study the kinetics of excited carriers in pentacene-MoS 2 p-n type-II heterojunctions by transient absorption spectroscopy. These measurements show that the dissociation of MoS 2 excitons occurs by hole transfer to pentacene on the time scale of 6.7 ps. In addition, the charge-separated state lives for 5.1 ns, up to an order of magnitude longer than the recombination lifetimes from previously reported 2D material heterojunctions. By studying the fractional amplitudes of the MoS 2 decay processes, the hole transfer yield from MoS 2 to pentacene is found to be ∼50%, with the remaining holes undergoing trapping due to surface defects. Overall, the ultrafast charge transfer and long-lived charge-separated state in pentacene-MoS 2 p-n heterojunctions suggest significant promise for mixed-dimensional van der Waals heterostructures in photovoltaics, photodetectors, and related optoelectronic technologies.

  9. [Evaluation of sensitization to Der p 1 and Der p 2 in a pediatric population of the North of Portugal].

    PubMed

    Peixoto, Sara; Soares, Joana; Monteiro, Tânia; Carvalho, Marisa; Santos, Marinela; Simões, Carla; Quaresma, Márcia

    2017-12-28

    In Portugal, data on the role of Der p 1 and Der p 2 in patients with house dust mite (HDM) allergy are scarce. Allergen-specific immunotherapy (sIT) is the only treatment that improves symptoms, reduces the need for pharmacological therapy and modifies the natural history of the disease. With this study, the authors aim to understand the local epidemiology and to clarify if the molecular assay of major allergens is advantageous in deciding and/or modifying the decision to initiate sIT in children with clinical indication which are sensitized to Dermatophagoides pteronyssinus. Retrospective study with analysis of patients with asthma and/or rhinitis. January/2013-December/2016. 1) positive prick-test to Dermatophagoides pteronyssinus; and 2) clinically relevant disease under treatment. Assay Der p 1 and Der p 2 values ≥0.35 kUA/L were considered positive. Statistical significance was set at P<.05. The clinical files of 279 patients. Mean ages 9.55 years (min.4-max.17). Asthma was present in 199 children (71.3%) and rhinitis in 245 (87.8%). Der p 1 and Der p 2 was <0.35kUA/L in 29 (10,4%) patients. The value of Der p 1/Der p 2 correlated with the size of the prick-test papule, the value of the eosinophils and the total IgE. Der p 1 and Der p 2 are dominant allergens in our population and there may be benefits in determining these molecular allergen levels in patients with a positive prick-test and a clinical indication for sIT prior to a decision of initiating sIT or not. Copyright © 2017. Publicado por Elsevier España, S.L.U.

  10. Retrospektive Analyse von Zufallsbefunden, die bei Patienten mit kutanem malignen Malignom durch (18) F-Fluordeoxyglucose-PET/CT erhoben wurden.

    PubMed

    Conrad, Franziska; Winkens, Thomas; Kaatz, Martin; Goetze, Steven; Freesmeyer, Martin

    2016-08-01

    Bei der (18) F-Fluordeoxyglucose-Positronenemissionstomographie/Computertomographie (FDG-PET/CT) ergeben sich häufig Zufallsbefunde. In der vorliegenden Studie konzentrierten wir uns auf mittels FDG-PET/CT erhaltene Zufallsbefunde bei Patienten mit kutanem Melanom und überprüften deren Relevanz hinsichtlich weiterer diagnostischer Maßnahmen und Interventionen. Die Krankenakten von 181 konsekutiven Melanom-Patienten wurden retrospektiv ausgewertet, um das Management von Zufallsbefunden zu dokumentieren. Der Schwerpunkt lag dabei auf den histologischen Befunden. Bei 33 von 181 (18 %) Patienten lagen 39 relevante Zufallsbefunde vor, und zwar im Kolorektalbereich (n = 15 Patienten), in der Schilddrüse (n = 8), der Prostata (n = 2), dem Bewegungsapparat (n = 2), in Lymphknoten (n = 2), der Parotis (n = 1), den Mandeln (n = 1), den Nieren (n = 1) und der Gallenblase (n = 1). Bei 25 Patienten schlossen sich weitere diagnostische Verfahren an, wobei in 21 Fällen ein klinisches Korrelat nachgewiesen wurde. Bei 16 von 21 Patienten ergab sich eine Neoplasie, darunter fünf maligne Läsionen (vier Kolonkarzinome und ein Prostatakarzinom). Die Malignome wurden frühzeitig diagnostiziert und in der Mehrzahl der Fälle erfolgreich entfernt. Der Einsatz der FDG-PET/CT als Routine-Diagnostik wird in den Leitlinien empfohlen und ist indiziert bei malignem Melanom ab Stadium IIC. In dieser Studie wurden auf effektive Weise ansonsten nicht erkannte Krebserkrankungen, insbesondere Kolonkarzinome, detektiert. In den meisten Fällen war eine frühe Intervention möglich. Zufallsbefunde durch FDG-PET/CT sollten, unter Berücksichtigung des Zustands und der Wünsche des Patienten, mit den geeigneten diagnostischen Maßnahmen abgeklärt werden. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  11. Molecular, Structural and Immunological Characterization of Der p 18, a Chitinase-Like House Dust Mite Allergen.

    PubMed

    Resch, Yvonne; Blatt, Katharina; Malkus, Ursula; Fercher, Christian; Swoboda, Ines; Focke-Tejkl, Margit; Chen, Kuan-Wei; Seiberler, Susanne; Mittermann, Irene; Lupinek, Christian; Rodriguez-Dominguez, Azahara; Zieglmayer, Petra; Zieglmayer, René; Keller, Walter; Krzyzanek, Vladislav; Valent, Peter; Valenta, Rudolf; Vrtala, Susanne

    2016-01-01

    The house dust mite (HDM) allergen Der p 18 belongs to the glycoside hydrolase family 18 chitinases. The relevance of Der p 18 for house dust mite allergic patients has only been partly investigated. To perform a detailed characterization of Der p 18 on a molecular, structural and immunological level. Der p 18 was expressed in E. coli, purified to homogeneity, tested for chitin-binding activity and its secondary structure was analyzed by circular dichroism. Der p 18-specific IgG antibodies were produced in rabbits to localize the allergen in mites using immunogold electron microscopy and to search for cross-reactive allergens in other allergen sources (i.e. mites, crustacea, mollusca and insects). IgE reactivity of rDer p 18 was tested with sera from clinically well characterized HDM-allergic patients (n = 98) and its allergenic activity was analyzed in basophil activation experiments. Recombinant Der p 18 was expressed and purified as a folded, biologically active protein. It shows weak chitin-binding activity and partial cross-reactivity with Der f 18 from D. farinae but not with proteins from the other tested allergen sources. The allergen was mainly localized in the peritrophic matrix of the HDM gut and to a lower extent in fecal pellets. Der p 18 reacted with IgE from 10% of mite allergic patients from Austria and showed allergenic activity when tested for basophil activation in Der p 18-sensitized patients. Der p 18 is a rather genus-specific minor allergen with weak chitin-binding activity but exhibits allergenic activity and therefore should be included in diagnostic test panels for HDM allergy.

  12. Der II. Hauptsatz der Wärmelehre

    NASA Astrophysics Data System (ADS)

    Heintze, Joachim

    Wir haben in (4.44) den II. Hauptsatz als empirische Tatsache folgendermaßen formuliert: (i) Wärmeenergie geht von selbst nur von einem wärmeren Körper auf einen kälteren über, niemals in der umgekehrten Richtung. Nun werden wir beweisen, dass sich aus diesem Prinzip folgende äquivalente Formulierungen für den II. Hauptsatz ableiten lassen: (ii) Es ist unmöglich, ein Perpetuum mobile zweiter Art zu bauen, d. h. eine Maschine, die fortlaufend Wärmeenergie vollständig in mechanische Arbeit umsetzen kann. Eine Wärmekraftmaschine, die einen Kreisprozess mit der höchsten Temperatur Tw und der niedrigsten Temperatur Tk durchläuft, hat höchstens den Carnotschen Wirkungsgrad c = (Tw - Tk)/Tw. Wenn in der Maschine nur reversible Prozesse ablaufen, die gesamte Wärmezufuhr bei der Temperatur Tw erfolgt und ausschließlich bei der Temperatur Tw gekühlt wird, ist ihr Wirkungsgrad = C. Es gibt keine Wärmekraftmaschine, die eine bessere Ausnutzung der Wärmeenergie ermöglicht. (iv) In jedem thermodynamischen System existiert die Zustandsgröße Entropie, definiert durch ihr Differential dS = (dQrev)/T . Entropie kann erzeugt, aber nicht vernichtet werden. Bei Zustandsänderungen, die in einem abgeschlossenen System ablaufen, nimmt die Entropie entweder zu (irreversible Prozesse), oder sie bleibt konstant (reversible Prozesse). Im Anschluss an (iii) werden wir zur Definition der thermodynamischen Temperatur und bei der Diskussion von (iv) zu einem tieferen Verständnis der Entropie gelangen. Es zeigt sich, dass die Entropie das eigentliche Bindeglied zwischen Mechanik und Wärmelehre darstellt. Am Ende des Kapitels werden wir einige Anwendungen des II. Hauptsatzes betrachten.

  13. Molecular, Structural and Immunological Characterization of Der p 18, a Chitinase-Like House Dust Mite Allergen

    PubMed Central

    Resch, Yvonne; Blatt, Katharina; Malkus, Ursula; Fercher, Christian; Swoboda, Ines; Focke-Tejkl, Margit; Chen, Kuan-Wei; Seiberler, Susanne; Mittermann, Irene; Lupinek, Christian; Rodriguez-Dominguez, Azahara; Zieglmayer, Petra; Zieglmayer, René; Keller, Walter; Krzyzanek, Vladislav; Valent, Peter; Valenta, Rudolf; Vrtala, Susanne

    2016-01-01

    Background The house dust mite (HDM) allergen Der p 18 belongs to the glycoside hydrolase family 18 chitinases. The relevance of Der p 18 for house dust mite allergic patients has only been partly investigated. Objective To perform a detailed characterization of Der p 18 on a molecular, structural and immunological level. Methods Der p 18 was expressed in E. coli, purified to homogeneity, tested for chitin-binding activity and its secondary structure was analyzed by circular dichroism. Der p 18-specific IgG antibodies were produced in rabbits to localize the allergen in mites using immunogold electron microscopy and to search for cross-reactive allergens in other allergen sources (i.e. mites, crustacea, mollusca and insects). IgE reactivity of rDer p 18 was tested with sera from clinically well characterized HDM-allergic patients (n = 98) and its allergenic activity was analyzed in basophil activation experiments. Results Recombinant Der p 18 was expressed and purified as a folded, biologically active protein. It shows weak chitin-binding activity and partial cross-reactivity with Der f 18 from D. farinae but not with proteins from the other tested allergen sources. The allergen was mainly localized in the peritrophic matrix of the HDM gut and to a lower extent in fecal pellets. Der p 18 reacted with IgE from 10% of mite allergic patients from Austria and showed allergenic activity when tested for basophil activation in Der p 18-sensitized patients. Conclusion Der p 18 is a rather genus-specific minor allergen with weak chitin-binding activity but exhibits allergenic activity and therefore should be included in diagnostic test panels for HDM allergy. PMID:27548813

  14. In situ Van der Pauw measurements of the Ni/YSZ anode during exposure to syngas with phosphine contaminant

    NASA Astrophysics Data System (ADS)

    Demircan, Oktay; Xu, Chunchuan; Zondlo, John; Finklea, Harry O.

    Solid oxide fuel cells (SOFCs) represent an option to provide a bridging technology for energy conversion (coal syngas) as well as a long-term technology (hydrogen from biomass). Whether the fuel is coal syngas or hydrogen from biomass, the effect of impurities on the performance of the anode is a vital question. The anode resistivity during SOFC operation with phosphine-contaminated syngas was studied using the in situ Van der Pauw method. Commercial anode-supported solid oxide fuel cells (Ni/YSZ composite anodes, YSZ electrolytes) were exposed to a synthetic coal syngas mixture (H 2, H 2O, CO, and CO 2) at a constant current and their performance evaluated periodically with electrochemical methods (cyclic voltammetry, impedance spectroscopy, and polarization curves). In one test, after 170 h of phosphine exposure, a significant degradation of cell performance (loss of cell voltage, increase of series resistance and increase of polarization resistance) was evident. The rate of voltage loss was 1.4 mV h -1. The resistivity measurements on Ni/YSZ anode by the in situ Van der Pauw method showed that there were no significant changes in anode resistivity both under clean syngas and syngas with 10 ppm PH 3. XRD analysis suggested that Ni 5P 2 and P 2O 5 are two compounds accumulated on the anode. XPS studies provided support for the presence of two phosphorus phases with different oxidation states on the external anode surface. Phosphorus, in a positive oxidation state, was observed in the anode active layer. Based on these observations, the effect of 10 ppm phosphine impurity (or its reaction products with coal syngas) is assigned to the loss of performance of the Ni/YSZ active layer next to the electrolyte, and not to any changes in the thick Ni/YSZ support layer.

  15. Distributed Energy Resources and Dynamic Microgrid: An Integrated Assessment

    NASA Astrophysics Data System (ADS)

    Shang, Duo Rick

    The overall goal of this thesis is to improve understanding in terms of the benefit of DERs to both utility and to electricity end-users when integrated in power distribution system. To achieve this goal, a series of two studies was conducted to assess the value of DERs when integrated with new power paradigms. First, the arbitrage value of DERs was examined in markets with time-variant electricity pricing rates (e.g., time of use, real time pricing) under a smart grid distribution paradigm. This study uses a stochastic optimization model to estimate the potential profit from electricity price arbitrage over a five-year period. The optimization process involves two types of PHEVs (PHEV-10, and PHEV-40) under three scenarios with different assumptions on technology performance, electricity market and PHEV owner types. The simulation results indicate that expected arbitrage profit is not a viable option to engage PHEVs in dispatching and in providing ancillary services without more favorable policy and PHEV battery technologies. Subsidy or change in electricity tariff or both are needed. Second, it examined the concept of dynamic microgrid as a measure to improve distribution resilience, and estimates the prices of this emerging service. An economic load dispatch (ELD) model is developed to estimate the market-clearing price in a hypothetical community with single bid auction electricity market. The results show that the electricity market clearing price on the dynamic microgrid is predominantly decided by power output and cost of electricity of each type of DGs. At circumstances where CHP is the only source, the electricity market clearing price in the island is even cheaper than the on-grid electricity price at normal times. Integration of PHEVs in the dynamic microgrid will increase electricity market clearing prices. It demonstrates that dynamic microgrid is an economically viable alternative to enhance grid resilience.

  16. 1. Photographic copy of engineering drawing showing structure of Test ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. Photographic copy of engineering drawing showing structure of Test Stand 'B' (4215/E-16), also known as the 'Short Snorter.' California Institute of Technology, Jet Propulsion Laboratory, Plant Engineering 'Structural Addition - Bldg. E-12, Edwards Test Station,' drawing no. E12/1-1, 8 August 1957. - Jet Propulsion Laboratory Edwards Facility, Test Stand B, Edwards Air Force Base, Boron, Kern County, CA

  17. Direct analysis of airborne mite allergen (Der f1) in the residential atmosphere by chemifluorescent immunoassay using bioaerosol sampler.

    PubMed

    Miyajima, Kumiko; Suzuki, Yurika; Miki, Daisuke; Arai, Moeka; Arakawa, Takahiro; Shimomura, Hiroji; Shiba, Kiyoko; Mitsubayashi, Kohji

    2014-06-01

    Dermatophagoides farinae allergen (Der f1) is one of the most important indoor allergens associated with allergic diseases in humans. Mite allergen Der f1 is usually associated with particles of high molecular weight; thus, Der f1 is generally present in settled dust. However, a small quantity of Der f1 can be aerosolized and become an airborne component. Until now, a reliable method of detecting airborne Der f1 has not been developed. The aim of this study was to develop a fiber-optic chemifluorescent immunoassay for the detection of airborne Der f1. In this method, the Der f1 concentration measured on the basis of the intensity of fluorescence amplified by an enzymatic reaction between the labeled enzyme by a detection antibody and a fluorescent substrate. The measured Der f1 concentration was in the range from 0.49 to 250 ng/ml and a similar range was found by enzyme-linked immunosorbent assay (ELISA). This method was proved to be highly sensitive to Der f1 compared with other airborne allergens. For the implementation of airborne allergen measurement in a residential environment, a bioaerosol sampler was constructed. The airborne allergen generated by a nebulizer was conveyed to a newly sampler we developed for collecting airborne Der f1. The sampler was composed of polymethyl methacrylate (PMMA) cells for gas/liquid phases and some porous membranes which were sandwiched in between the two phases. Der f1 in air was collected by the sampler and measured using the fiber-optic immunoassay system. The concentration of Der f1 in aerosolized standards was in the range from 0.125 to 2.0 mg/m(3) and the collection rate of the device was approximately 0.2%. © 2013 Elsevier B.V. All rights reserved.

  18. Cybersecurity for distributed energy resources and smart inverters

    DOE PAGES

    Qi, Junjian; Hahn, Adam; Lu, Xiaonan; ...

    2016-12-01

    The increased penetration of distributed energy resources (DER) will significantly increase the number of devices that are owned and controlled by consumers and third parties. These devices have a significant dependency on digital communication and control, which presents a growing risk from cyber attacks. This paper proposes a holistic attack-resilient framework to protect the the integrated DER and the critical power grid infrastructure from malicious cyber attacks, helping ensure the secure integration of DER without harming the grid reliability and stability. Specifically, we discuss the architecture of the cyber-physical power system with a high penetration of DER and analyze themore » unique cybersecurity challenges introduced by DER integration. Next, we summarize important attack scenarios against DER, propose a systematic DER resilience analysis methodology, and develop effective and quantifiable resilience metrics and design principles. Lastly, we introduce attack prevention, detection, and response measures specifically designed for DER integration across cyber, physical device, and utility layers of the future smart grid.« less

  19. Dynamical importance of van der Waals saddle and excited potential surface in C(1D)+D2 complex-forming reaction

    PubMed Central

    Shen, Zhitao; Ma, Haitao; Zhang, Chunfang; Fu, Mingkai; Wu, Yanan; Bian, Wensheng; Cao, Jianwei

    2017-01-01

    Encouraged by recent advances in revealing significant effects of van der Waals wells on reaction dynamics, many people assume that van der Waals wells are inevitable in chemical reactions. Here we find that the weak long-range forces cause van der Waals saddles in the prototypical C(1D)+D2 complex-forming reaction that have very different dynamical effects from van der Waals wells at low collision energies. Accurate quantum dynamics calculations on our highly accurate ab initio potential energy surfaces with van der Waals saddles yield cross-sections in close agreement with crossed-beam experiments, whereas the same calculations on an earlier surface with van der Waals wells produce much smaller cross-sections at low energies. Further trajectory calculations reveal that the van der Waals saddle leads to a torsion then sideways insertion reaction mechanism, whereas the well suppresses reactivity. Quantum diffraction oscillations and sharp resonances are also predicted based on our ground- and excited-state potential energy surfaces. PMID:28094253

  20. Theoretische Konzepte der Physik

    NASA Astrophysics Data System (ADS)

    Longair, Malcolm S.; Simon, B.; Simon, H.

    "Dies ist kein Lehrbuch der theoretischen Physik, auch kein Kompendium der Physikgeschichte ... , vielmehr eine recht anspruchsvolle Sammlung historischer Miniaturen zur Vergangenheit der theoretischen Physik - ihrer "Sternstunden", wenn man so will. Frei vom Zwang, etwas Erschöpfendes vorlegen zu müssen, gelingt dem Autor etwas Seltenes: einen "lebendigen" Zugang zum Ideengebäude der modernen Physik freizulegen, ... zu zeigen, wie Physik in praxi entsteht... Als Vehikel seiner Absichten dienen dem Autor geschichtliche Fallstudien, insgesamt sieben an der Zahl. Aus ihnen extrahiert er das seiner Meinung nach Lehrhafte, dabei bestrebt, mathematische Anachronismen womöglich zu vermeiden... Als Student hätte ich mir diese gescheiten Essays zum Werden unserer heutigen physikalischen Weltsicht gewünscht. Sie sind originell, didaktisch klug und genieren sich auch nicht, von der Faszination zu sprechen, die ... von der Physik ausgeht. Unnötig darauf hinzuweisen, das sie ein gründliches "konventionelles" Studium weder ersetzen wollen noch können, sie vermögen aber, dazu zu ermuntern." #Astronomische Nachrichten (zur englischen Ausgabe)#1

  1. Cybersecurity for distributed energy resources and smart inverters

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Qi, Junjian; Hahn, Adam; Lu, Xiaonan

    The increased penetration of distributed energy resources (DER) will significantly increase the number of devices that are owned and controlled by consumers and third parties. These devices have a significant dependency on digital communication and control, which presents a growing risk from cyber attacks. This paper proposes a holistic attack-resilient framework to protect the the integrated DER and the critical power grid infrastructure from malicious cyber attacks, helping ensure the secure integration of DER without harming the grid reliability and stability. Specifically, we discuss the architecture of the cyber-physical power system with a high penetration of DER and analyze themore » unique cybersecurity challenges introduced by DER integration. Next, we summarize important attack scenarios against DER, propose a systematic DER resilience analysis methodology, and develop effective and quantifiable resilience metrics and design principles. Lastly, we introduce attack prevention, detection, and response measures specifically designed for DER integration across cyber, physical device, and utility layers of the future smart grid.« less

  2. Finite Strain Behavior of Polyurea for a Wide Range of Strain Rates

    DTIC Science & Technology

    2010-02-01

    dimensional dynamic compressive behavior of EPDM rubber ," Journal of Engineering Materials and Technology, Transaction of the ASME, 125:294-301. [97] Song, B...and Chen, W. (2004) "Dynamic compressive behavior of EPDM rubber un- der nearly uniaxial strain conditions," Journal of Engineering Materials and... rubber elastic springs to describe the steep initial stiffness of virgin butadiene rubber under tensile and compressive loading at intermediate strain

  3. Genuine Quantum Signatures in Synchronization of Anharmonic Self-Oscillators.

    PubMed

    Lörch, Niels; Amitai, Ehud; Nunnenkamp, Andreas; Bruder, Christoph

    2016-08-12

    We study the synchronization of a Van der Pol self-oscillator with Kerr anharmonicity to an external drive. We demonstrate that the anharmonic, discrete energy spectrum of the quantum oscillator leads to multiple resonances in both phase locking and frequency entrainment not present in the corresponding classical system. Strong driving close to these resonances leads to nonclassical steady-state Wigner distributions. Experimental realizations of these genuine quantum signatures can be implemented with current technology.

  4. Environmental Systems Test Stand

    NASA Astrophysics Data System (ADS)

    Barta, D.; Young, J.; Ewert, M.; Lee, S.; Wells, P.; Fortson, R.; Castillo, J.

    A test stand has been developed for the evaluation of prototype lighting, environmental control and crop cultivation technologies for plant production within an advanced life support system. Design of the test stand was based on preliminary designs of the center growth bay of the Biomass Production Chamber, one of several modules of the Bioregenerative Planetary Life Support Systems Test Complex (BIO- Plex). It consists of two controlled-environment shelves, each with 4.7 m2 of area for crop growth (150 cm width, 315 cm length). There are two chilled water loops, one for operation at conventional temperatures (5-10C) for air temperature and humidity control and one for operation at higher temperatures (15-50C) for waste heat acquisition and heating. Modular light boxes, utilizing either air-cooled or water- jacketed HPS lamps, have been developed. This modular design will allow for easy replacement of new lighting technologies within the light banks. An advanced data acquisition and control system has been developed utilizing localized, networked- based data acquisition modules and programmed with object-based control software.

  5. Personen- und Güterverkehr

    NASA Astrophysics Data System (ADS)

    Flämig, Heike; Gertz, Carsten; Mühlhausen, Thorsten

    Im Jahr 2010 war in Deutschland der Verkehrssektor für fast 20 % der energiebedingten Treibhausgase verantwortlich. Das Klima hat sich bereits so weit verändert, dass zur Sicherung der Funktion der Verkehrssysteme auch Anpassungsmaßnahmen notwendig sind. Diese Maßnahmen müssen durch verkehrsreduzierende bzw. -beeinflussende Maßnahmen ergänzt werden. Ausgehend von den Emissionen im Verkehrssektor und möglichen Minderungen schlägt das Kapitel den Bogen zu Optionen der Anpassung an den Klimawandel, die ausführlich und konkret dargestellt werden. Besonders betrachtet werden die mannigfaltigen Gefahren der Rückkopplung sowie die vielfältigen Wechselwirungen mit anderen Themengebieten und Sektoren.

  6. Strahlungsfeldbedingungen bei der Ionisationsdosimetrie

    NASA Astrophysics Data System (ADS)

    Krieger, Hanno

    Bei der Dosimetrie von Photonenstrahlungen mit luftgefüllten Ionisationskammern werden in diesem Kapitel zwei Grenzfälle unterschieden. Der eine Fall ist die Bedingung des so genannten Sekundärelektronengleichwichts im Kammervolumen. In diesem Fall bestimmen ausschließlich die Photonen im Messvolumen die dosimetrische Anzeige. Der zweite Grenzfall ist gegeben, wenn das Luftvolumen und die Kammer das Strahlungsfeld im Phantom so wenig stören, dass der Sekundärelektronenfluss unverändert bleibt. Diese Bedingungen nennt man BRAGG-GRAY-Bedingungen. Beide Grenzfälle sind in der Praxis nur näherungsweise zu verwirklichen. Abweichungen müssen durch entsprechende Korrekturen oder Kalibrierungen berücksichtigt werden.

  7. „Überholen ohne einzuholen“ Die Entwicklung von Technologien für übermorgen in Kernenergie und Mikroelektronik der DDR

    NASA Astrophysics Data System (ADS)

    Barkleit, Gerhard

    Dem nuklearen Patt zwischen Ostblock und westlichem Staatenbündnis ist es nach weitgehend übereinstimmender Auffassung von Politik und Wissenschaft zu danken, dass der "Kalte Krieg" in der zweiten Hälfte des 20. Jahrhunderts nicht zum weltumfassenden Flächenbrand eskalierte. An der raschen Herstellung dieses Patts waren zwei Dresdner Physiker maßgeblich beteiligt, deren einer im Manhattan-Projekt in den USA gearbeitet hatte und später in England der Spionage für die Sowjetunion und des Verrats des Know-how der Atombombe überführt wurde.

  8. Organisationsaspekte in der Umsetzung

    NASA Astrophysics Data System (ADS)

    Balck, Henning; Bungard, Walter; Hofmann, Karsten; Ganz, Walter; Schwenker, Burkhard; Hanßen, Dirk; Meindl, Rudolf; Schloske, Alexander; Thieme, Paul; Teufel, Peter

    Strukturbrüche sind eine der Hauptursachen für die Schwierigkeiten vieler Unternehmen, ihre Organisationsform zu modernisieren und vor allem turbulenten Marktbedingungen anzupassen. Klassische Beispiele für Strukturbrüche finden sich in der Spaltung von Aufbau- und Ablauforganisation, der Spaltung von Produktion und Dienstleistung oder der Spaltung von Planung und Ausführung. Ein wirkungsvoller Ansatz zur Überwindung solcher Spaltungen ist eine Art Versöhnungsmuster: die Polare Organisation. Wesentliche Elemente dieser Organisationsform sind ihr Netzwerkcharakter, kooperatives Zusammenwirken, eine hohe Kommunikationsintensität und eine polare Koppelung der kommunizierenden Partner oder - in abstrahierter Form - die organisierte Balance erfolgskritischer Gegensätze, wie Kosten und Qualität.

  9. Zeit im Wandel der Zeit.

    NASA Astrophysics Data System (ADS)

    Aichelburg, P. C.

    Contents: Einleitung(P. C. Aichelburg). 1. Über Zeit, Bewegung und Veränderung (Aristoteles). 2. Ewigkeit und Zeit (Plotin). 3. Was ist die Zeit? (Augustinus). 4. Von der Zeit (Immanuel Kant). 5. Newtons Ansichten über Zeit, Raum und Bewegung (Ernst Mach). 6. Über die mechanische Erklärung irreversibler Vorgänge (Ludwig Boltzmann). 7. Das Maß der Zeit (Henri Poincaré). 8. Dauer und Intuition (Henri Bergson). 9. Die Geschichte des Unendlichkeitsproblems (Bertrand Russell). 10. Raum und Zeit (Hermann Minkowski). 11. Der Unterschied von Zeit und Raum (Hans Reichenbach). 12. Newtonscher und Bergsonscher Zeitbegriff (Norbert Wiener). 13. Die Bildung des Zeitbegriffs beim Kinde (JeanPiaget).14. Eine Bemerkung über die Beziehungen zwischen Relativitätstheorie und der idealistischen Philosophie (Kurt Gödel). 15. Der zweite Hauptsatz und der Unterschied von Vergangenheit und Zukunft (Carl Friedrich v. Weizsäcker). 16. Zeit als physikalischer Begriff (Friedrich Hund). 17. Zeitmessung und Zeitbegriff in der Astronomie (Otto Heckmann). 18. Kann die Zeit rückwärts gehen? (Martin Gardner). 19. Zeit und Zeiten (Ilya Prigogine, Isabelle Stengers). 20. Zeit als dynamische Größe in der Relativitätstheorie (P. C. Aichelburg).

  10. Psychometric Properties of the Persian Version of the Difficulties in Emotion Regulation Scale) DERS-6 & DERS-5- Revised (in an Iranian Clinical Sample.

    PubMed

    Mazaheri, Mina

    2015-04-01

    The purpose of this study was to determine the construct validity and reliability of the two forms of the Persian version of the Difficulties in Emotion Regulation Scale (DERS-6 & DERS-5-revised) in a clinical sample. The clinical sample consisted of 181 patients diagnosed with Functional GI Disorders (FGID) who referred to the digestive psychosomatic clinic in Isfahan in 2012. They were selected by census method (In a given period of time). The Persian version of the DERS, the short form of the DASS, and the TAS-20 were used to collect data. The results of the factor structure or construct validity using principal components analysis with varimax rotation recognized 7 factors for the DERS-6 (Goals, Awarness, Impalse, Non Acceptance, Strategy, Clarity, Recognition), and 6 factors for the DERS-5- revised (Non Acceptance, Goals, Impalse, Strategy, Clarity, Recognition) in the clinical sample. They showed the common variance of 59.51% and 59.15%, respectively. Also, the results showed that the concurrent validity of both forms of the DERS and most of their factors, and their reliability in terms of Cronbach-Alpha were favorable. Considering the factor structure and favorable psychometric properties of the two scales of DERS-6 & DERS-5-revised, the scales can be used in clinical samples.

  11. Statistik in Naturwissenschaft und Technik

    NASA Astrophysics Data System (ADS)

    Wilrich, Peter-Theodor

    Mit dem Aufschwung von Naturwissenschaft und Technik zu Beginn des 19. Jahrhunderts entstand die mathematische Statistik, angeregt aus der Geodäsie (wie die Methode der kleinsten Quadrate) und der Anthropologie (wie die statistische Analyse mehrdimensionaler Beobachtungen und ihrer stochastischen Abhängigkeiten). Im Gegensatz zu den Wirtschafts- und Sozialwissenschaften, in denen Daten vorwiegend aus Beobachtungsstudien gewonnen werden, stehen in den Naturwissenschaften Experimente im Vordergrund. Daher gehört die statistische Versuchsplanung zu den insbesondere in Naturwissenschaft und Technik angewendeten statistischen Methoden, aber auch die Extremwertstatistik und Lebensdaueranalysen sowie die Methoden der räumlichen Statistik (insbesondere in der Umweltforschung). Im 20. Jahrhundert wurden Stichprobenpläne und Regelkarten (Kontrollkarten) zur Prozessregelung als Hilfsmittel der statistischen Qualitätssicherung entwickelt. Diese Methodenbündel, mit denen sich der Ausschuss Statistik in Naturwissenschaft und Technik immer wieder befasst, werden im Folgenden vorgestellt.

  12. Verantwortlicher Umgang mit Antibiotika: Notwendigkeit der Antibiotikareduktion in der Aknetherapie.

    PubMed

    Gollnick, Harald P M; Buer, Jan; Beissert, Stefan; Sunderkätter, Cord

    2016-12-01

    Der übermäßige oder unkritische weltweite Einsatz von Antibiotika in der Medizin hat die Ausbreitung von Antibiotikaresistenzen beschleunigt. In einigen Bereichen sind viele Antibiotika bei bakteriellen Infektionen, die zuvor noch gut auf antibakterielle Wirkstoffe reagierten, mittlerweile wirkungslos geworden. Dermatologen/Venerologen setzten orale und topische Antibiotika bei der Behandlung von Acne vulgaris routinemäßig ein, obwohl Akne weder eine infektiöse Erkrankung ist noch alleine durch das Propionibacterium getriggert wird. Vielmehr ist sie eine komplexe, chronische entzündliche Hauterkrankung, die durch verschiedene pathogenetische Faktoren wie follikuläre Hyperkeratose, erhöhter Sebumproduktion, bakterielle Proliferation und Entzündung zustande kommt. Folglich sollte eine erfolgreiche Therapie auf die Bekämpfung verschiedener pathogenetischer Faktoren und nicht nur auf die von Propionibacterium acnes abzielen. Daher wurden topische Retinoide und Benzoylperoxid als Mittel der ersten Wahl definiert. Monotherapien mit lokalen Antibiotika sollten insgesamt vermieden werden. Systemische Antibiotika der Tetrazyklin-Gruppe haben bei bestimmen Krankheitsstadien ihren Sinn, ihre Wirkung könnte aber eher auf der antientzündlichen als auf der antibiotischen Reaktion beruhen. Gesundheitsbehörden ermahnen alle Gesundheitsdienstleister, den Einsatz von Antibiotika einzuschränken. Das Nutzen-Risiko-Verhältnis muss bei der Entscheidung für oder gegen eine antibiotische Therapie bei einem einzelnen Patienten immer auch in Bezug auf das öffentliche Interesse am Erhalt der Wirksamkeit von Antibiotika abgewogen werden. Im Folgenden werden das aktuelle Krankheitskonzept zu Acne vulgaris und die sich daraus ableitenden Konsequenzen für den Einsatz von Antibiotika vorgestellt. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  13. Titanisierung von Implantatoberflächen

    NASA Astrophysics Data System (ADS)

    Zimmermann, Hanngörg; Heinlein, Markus; Guldner, Norbert W.

    Titan gilt seit Jahrzehnten als einer der wichtigsten Implantatwerkstoffe in der Medizin. Neben den guten mechanischen Eigenschaften (Leichtigkeit, hohe Festigkeit etc.), besitzen Titanimplantate vor allem eine hervorragende Körperverträglichkeit, so dass die Implantate optimal in den humanen Organismus integriert werden [1]. Ist jedoch aufgrund der Anforderungen an das Implantat eine hohe Flexibilität und/ oder Elastizität gefragt, so scheidet der Werkstoff Titan aufgrund seiner spröden und unflexiblen Materialeigenschaften aus. Die Folge ist der Einsatz von Implantatmaterialien, sowohl künstlichen als auch biologischen Ursprungs, welche nicht selten eine unzureichende Biokompatibilität aufweisen und somit zu Fremdköper- und immunologischen Reaktionen und Einkapselung des Implantates führen können. Die Erhöhung der Körperverträglichkeit, eine Adaption an das biologische Umfeld und eine hohe Biokompatibilität sind demzufolge die wichtigsten Eigenschaften bei der bedarfsgerechten Herstellung von Implantaten und Implantatoberflächen. Zur Gestaltung von innovativen, biokompatiblen Oberflächen stehen unterschiedliche technische Lösungsansätze zur Verfügung. Zum einen besteht die Möglichkeit, geeignete Oberflächeneigenschaften aus dem Grundmaterial selbst zu optimieren. Dies geschieht unter anderem durch Modifikation der Werkstoffoberflächen in Form von Texturierungen und Oberflächenrauhigkeiten. Zum anderen können die Oberflächeneigenschaften unabhängig von denen des Trägermaterials gestaltet werden. Durch Funktionalisierung der Oberflächen mit geeigneten Beschichtungen oder der Zugabe von Medikamenten (Drug Eluting) werden die Kunststoffimplantate dahingehend verändert, dass eine Steigerung der Körperakzeptanz erreicht wird. Die Titanbeschichtung von Implantatoberflächen kombiniert die positiven Materialeigenschaften von Titan und Polymer.

  14. Mechatronic Wearable Exoskeletons for Bionic Bipedal Standing and Walking: A New Synthetic Approach

    PubMed Central

    Onose, Gelu; Cârdei, Vladimir; Crăciunoiu, Ştefan T.; Avramescu, Valeriu; Opriş, Ioan; Lebedev, Mikhail A.; Constantinescu, Marian Vladimir

    2016-01-01

    During the last few years, interest has been growing to mechatronic and robotic technologies utilized in wearable powered exoskeletons that assist standing and walking. The available literature includes single-case reports, clinical studies conducted in small groups of subjects, and several recent systematic reviews. These publications have fulfilled promotional and marketing objectives but have not yet resulted in a fully optimized, practical wearable exoskeleton. Here we evaluate the progress and future directions in this field from a joint perspective of health professionals, manufacturers, and consumers. We describe the taxonomy of existing technologies and highlight the main improvements needed for the development and functional optimization of the practical exoskeletons. PMID:27746711

  15. The Philosophy of Science and Technology in China: Political and Ideological Influences

    NASA Astrophysics Data System (ADS)

    Guo, Yuanlin

    2014-09-01

    In China, the philosophy of science and technology (PST) is derived from "Dialectics of Nature" (DN), which is based on Engels' unfinished book Dialektik der Natur. DN as a political ideology provides political guidance for scientists and engineers. Therefore, since 1981, "Introduction to Dialectics of Nature" (IDN) has been an obligatory course for master's degree students who study natural science or technology. In 1987, DN was renamed PST by the Chinese government in order to communicate and do research. The IDN teachers constitute most of the scholars who research PST. Nowadays, in China, PST includes philosophy of nature, philosophy of science, philosophy of technology, sociology of science, sociology of technology, "science, technology and society," history of science, history of technology, management of science, and management of technology due to having too many IDN teachers. In fact, it is neither a branch of philosophy, nor a subject. The number of the IDN teachers has been increasing since 1981, which makes PST a miscellaneous collection of many branches or subjects. Finally, PST is facing two new challenges: the reduction of IDN and academic corruption.

  16. Elastolysen und Hauterkrankungen mit Verlust der elastischen Fasern.

    PubMed

    Tronnier, Michael

    2018-02-01

    Die elastischen Fasern sind neben den kollagenen Fasern der wichtigste Bestandteil des Bindegewebsgerüstes der Haut. Eine Verminderung oder ein Verlust der elastischen Fasern ist bei einer Vielzahl von klinisch sich unterschiedlich präsentierenden Erkrankungen, hereditär oder erworben, beschrieben. Bei den Erkrankungen, die mit einer Entzündung einhergehen ist die Elastophagozytose ein wichtiges histologisches Merkmal. Die Therapie der Erkrankungen dieser Gruppe ist grundsätzlich schwierig. © 2018 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  17. Maschinensicherheit

    NASA Astrophysics Data System (ADS)

    Linke, Petra

    Soll eine Maschine ohne weitere Überprüfung in Europa in Verkehr gebracht werden, so ist nachzuweisen, dass diese die Forderungen der sogenannten Maschinenrichtlinie erfüllt. Durch Gesetzgebungen und Normen innerhalb der Mitgliedsstaaten wird das Einhalten dieser Richtlinie abgesichert. Ihr Ziel ist es, dass von der Maschine keine Gefahr für den Menschen ausgeht, d.h. sämtliche Sicherheits- und Gesundheitsschutzanforderungen erfüllt werden. Dieses Kapitel beschreibt das allgemeine Vorgehen, das zu einer funktional sicheren Maschine und somit der Erfüllung der Maschinenrichtlinie führt.

  18. Design of a prosumer EMS for energy trading

    NASA Astrophysics Data System (ADS)

    Hwang, T.; Yoo, Y.; Kang, S.; Lee, I.

    2018-03-01

    We design a DER management system for energy trading based on OASIS EI and EMIX. With the spread of DERs, there is a growing need of a system for integrated management of DERs and customer loads. In this paper, we give a brief overview of a DER EMS for prosumer energy saving and trading. Based on the OASIS standards, we design a functional architecture of a DER EMS for energy trading. After showing communication protocols and operation sequences, we summarize our works.

  19. Effects of sitting versus standing and scanner type on cashiers.

    PubMed

    Lehman, K R; Psihogios, J P; Meulenbroek, R G

    2001-06-10

    In the retail supermarket industry where cashiers perform repetitive, light manual material-handling tasks when scanning and handling products, reports of musculoskeletal disorders and discomfort are high. Ergonomics tradeoffs exist between sitting and standing postures, which are further confounded by the checkstand design and point-of-sale technology, such as the scanner. A laboratory experiment study was conducted to understand the effects of working position (sitting versus standing) and scanner type (bi-optic versus single window) on muscle activity, upper limb and spinal posture, and subjective preference of cashiers. Ten cashiers from a Dutch retailer participated in the study. Cashiers exhibited lower muscle activity in the neck and shoulders when standing and using a bi-optic scanner. Shoulder abduction was also less for standing conditions. In addition, all cashiers preferred using the bi-optic scanner with mixed preferences for sitting (n = 6) and standing (n = 4). Static loading of the muscles was relatively high compared with benchmarks, suggesting that during the task of scanning, cashiers may not have adequate recovery time to prevent fatigue. It is recommended that retailers integrate bi-optic scanners into standing checkstands to minimize postural stress, fatigue and discomfort in cashiers.

  20. The Open Ed Tech: Never Mind the Edupunks; or, The Great Web 2.0 Swindle

    ERIC Educational Resources Information Center

    Lamb, Brian; Groom, Jim

    2010-01-01

    Has the wave of the open web crested? What does "open educational technology" look like, and does it stand for anything? In this article, the authors discuss the rise of open educational technology. The present range of Web 2.0 service providers offers a self-evident strategic technology framework. Without much effort, online teachers and learners…

  1. Don't Fear the Cyborg: Toward Embracing Posthuman and Feminist Cyborg Discourses in Teacher Education and Educational Technology Research

    ERIC Educational Resources Information Center

    Gleason, Shannon C.

    2014-01-01

    I argue that larger cultural concerns about human-technology interactions are seldom addressed in teacher education. This article seeks to trace cultural anxieties about technology by addressing the long-standing trope of human versus machine; examine how these concerns are manifested and addressed (or not) in popular culture, educational…

  2. State-of-the-art and emerging technologies for atrial fibrillation ablation.

    PubMed

    Dewire, Jane; Calkins, Hugh

    2010-03-01

    Catheter ablation is an important treatment modality for patients with atrial fibrillation (AF). Although the superiority of catheter ablation over antiarrhythmic drug therapy has been demonstrated in middle-aged patients with paroxysmal AF, the role the procedure in other patient subgroups-particularly those with long-standing persistent AF-has not been well defined. Furthermore, although AF ablation can be performed with reasonable efficacy and safety by experienced operators, long-term success rates for single procedures are suboptimal. Fortunately, extensive ongoing research will improve our understanding of the mechanisms of AF, and considerable funds are being invested in developing new ablation technologies to improve patient outcomes. These technologies include ablation catheters designed to electrically isolate the pulmonary veins with improved safety, efficacy, and speed, catheters designed to deliver radiofrequency energy with improved precision, robotic systems to address the technological demands of the procedure, improved imaging and electrical mapping systems, and MRI-guided ablation strategies. The tools, technologies, and techniques that will ultimately stand the test of time and become the standard approach to AF ablation in the future remain unclear. However, technological advances are sure to result in the necessary improvements in the safety and efficacy of AF ablation procedures.

  3. [A failed experiment - Carl Friedrich von Weizsäcker, Jürgen Habermas and the Max-Planck Society].

    PubMed

    Leendertz, Ariane

    2014-01-01

    From 1970 to 1980 Carl Friedrich von Weizsäcker headed the Max-Planck-lnstitut zur Erforschung der Lebensbedingungen der wissenschaftlich-technischen Welt (MPI for the study of the living conditions of the world of science and technology) in Starnberg, jointly with Jürgen Habermas since 1971. From the start, the Max Planck Society regarded the new institute as an experiment that might perhaps be aborted a few years later. This is exactly what happened. With the retirement of Weizsäcker, his section was closed and the whole institute was renamed. In 1981. Habermas resigned, and then the institute was closed. This paper focusses on some of the problem constellations within the institute that partly explain its development and eventual closure: its birth out of the idea of scientific policy advice, the debates within the Max Planck Society and the complex relationship between Weizsäcker and Jürgen Habermas.

  4. Phonon-Assisted Ultrafast Charge Transfer at van der Waals Heterostructure Interface.

    PubMed

    Zheng, Qijing; Saidi, Wissam A; Xie, Yu; Lan, Zhenggang; Prezhdo, Oleg V; Petek, Hrvoje; Zhao, Jin

    2017-10-11

    The van der Waals (vdW) interfaces of two-dimensional (2D) semiconductor are central to new device concepts and emerging technologies in light-electricity transduction where the efficient charge separation is a key factor. Contrary to general expectation, efficient electron-hole separation can occur in vertically stacked transition-metal dichalcogenide heterostructure bilayers through ultrafast charge transfer between the neighboring layers despite their weak vdW bonding. In this report, we show by ab initio nonadiabatic molecular dynamics calculations, that instead of direct tunneling, the ultrafast interlayer hole transfer is strongly promoted by an adiabatic mechanism through phonon excitation occurring on 20 fs, which is in good agreement with the experiment. The atomic level picture of the phonon-assisted ultrafast mechanism revealed in our study is valuable both for the fundamental understanding of ultrafast charge carrier dynamics at vdW heterointerfaces as well as for the design of novel quasi-2D devices for optoelectronic and photovoltaic applications.

  5. Room temperature high-detectivity mid-infrared photodetectors based on black arsenic phosphorus

    PubMed Central

    Long, Mingsheng; Gao, Anyuan; Wang, Peng; Xia, Hui; Ott, Claudia; Pan, Chen; Fu, Yajun; Liu, Erfu; Chen, Xiaoshuang; Lu, Wei; Nilges, Tom; Xu, Jianbin; Wang, Xiaomu; Hu, Weida; Miao, Feng

    2017-01-01

    The mid-infrared (MIR) spectral range, pertaining to important applications, such as molecular “fingerprint” imaging, remote sensing, free space telecommunication, and optical radar, is of particular scientific interest and technological importance. However, state-of-the-art materials for MIR detection are limited by intrinsic noise and inconvenient fabrication processes, resulting in high-cost photodetectors requiring cryogenic operation. We report black arsenic phosphorus–based long-wavelength IR photodetectors, with room temperature operation up to 8.2 μm, entering the second MIR atmospheric transmission window. Combined with a van der Waals heterojunction, room temperature–specific detectivity higher than 4.9 × 109 Jones was obtained in the 3- to 5-μm range. The photodetector works in a zero-bias photovoltaic mode, enabling fast photoresponse and low dark noise. Our van der Waals heterojunction photodetectors not only exemplify black arsenic phosphorus as a promising candidate for MIR optoelectronic applications but also pave the way for a general strategy to suppress 1/f noise in photonic devices. PMID:28695200

  6. Room temperature high-detectivity mid-infrared photodetectors based on black arsenic phosphorus.

    PubMed

    Long, Mingsheng; Gao, Anyuan; Wang, Peng; Xia, Hui; Ott, Claudia; Pan, Chen; Fu, Yajun; Liu, Erfu; Chen, Xiaoshuang; Lu, Wei; Nilges, Tom; Xu, Jianbin; Wang, Xiaomu; Hu, Weida; Miao, Feng

    2017-06-01

    The mid-infrared (MIR) spectral range, pertaining to important applications, such as molecular "fingerprint" imaging, remote sensing, free space telecommunication, and optical radar, is of particular scientific interest and technological importance. However, state-of-the-art materials for MIR detection are limited by intrinsic noise and inconvenient fabrication processes, resulting in high-cost photodetectors requiring cryogenic operation. We report black arsenic phosphorus-based long-wavelength IR photodetectors, with room temperature operation up to 8.2 μm, entering the second MIR atmospheric transmission window. Combined with a van der Waals heterojunction, room temperature-specific detectivity higher than 4.9 × 10 9 Jones was obtained in the 3- to 5-μm range. The photodetector works in a zero-bias photovoltaic mode, enabling fast photoresponse and low dark noise. Our van der Waals heterojunction photodetectors not only exemplify black arsenic phosphorus as a promising candidate for MIR optoelectronic applications but also pave the way for a general strategy to suppress 1/ f noise in photonic devices.

  7. Effects of Home Energy Management Systems on Distribution Utilities and Feeders Under Various Market Structures: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ruth, Mark; Pratt, Annabelle; Lunacek, Monte

    2015-07-17

    The combination of distributed energy resources (DER) and retail tariff structures to provide benefits to both utility consumers and the utilities is poorly understood. To improve understanding, an Integrated Energy System Model (IESM) is being developed to simulate the physical and economic aspects of DER technologies, the buildings where they reside, and feeders servicing them. The IESM was used to simulate 20 houses with home energy management systems on a single feeder under a time of use tariff to estimate economic and physical impacts on both the households and the distribution utilities. HEMS reduce consumers’ electric bills by precooling housesmore » in the hours before peak electricity pricing. Household savings are greater than the reduction utility net revenue indicating that HEMS can provide a societal benefit providing tariffs are structured so that utilities remain solvent. Utilization of HEMS reduce peak loads during high price hours but shifts it to hours with off-peak and shoulder prices and resulting in a higher peak load.« less

  8. Bildanalyse in Medizin und Biologie

    NASA Astrophysics Data System (ADS)

    Athelogou, Maria; Schönmeyer, Ralf; Schmidt, Günther; Schäpe, Arno; Baatz, Martin; Binnig, Gerd

    Heutzutage sind bildgebende Verfahren aus medizinischen Untersuchungen nicht mehr wegzudenken. Diverse Methoden - basierend auf dem Einsatz von Ultraschallwellen, Röntgenstrahlung, Magnetfeldern oder Lichtstrahlen - werden dabei spezifisch eingesetzt und liefern umfangreiches Datenmaterial über den Körper und sein Inneres. Anhand von Mikroskopieaufnahmen aus Biopsien können darüber hinaus Daten über die morphologische Eigenschaften von Körpergeweben gewonnen werden. Aus der Analyse all dieser unterschiedlichen Arten von Informationen und unter Konsultation weiterer klinischer Untersuchungen aus diversen medizinischen Disziplinen kann unter Berücksichtigung von Anamnesedaten ein "Gesamtbild“ des Gesundheitszustands eines Patienten erstellt werden. Durch die Flut der erzeugten Bilddaten kommt der Bildverarbeitung im Allgemeinen und der Bildanalyse im Besonderen eine immer wichtigere Rolle zu. Gerade im Bereich der Diagnoseunterstützung, der Therapieplanung und der bildgeführten Chirurgie bilden sie Schlüsseltechnologien, die den Forschritt nicht nur auf diesen Gebieten maßgeblich vorantreiben.

  9. Integriertes Informationsmanagement an der Westfälischen Wilhelms-Universität Münster - Das Projekt MIRO

    NASA Astrophysics Data System (ADS)

    Vogl, Raimund; Gildhorn, Antje; Labitzke, Jörg; Wibberg, Michael

    An der Westfälischen Wilhelms-Universität Münster (WWU) wurde bereits 1996 ein tragfähiges, kooperativ ausgerichtetes System der IT-Governance im Zusammenspiel zentraler und dezentraler IT-Leistungserbringer etabliert. Um den Anforderungen an ein integriertes Informationsmanagement im Überlappungsfeld von Information, Kommunikation und Medien (IKM) durch das Zusammenspiel der zentralen Einrichtungen Universitätsverwaltung (UniV), Universitäts- und Landesbibliothek (ULB) und Zentrum für Informationsverarbeitung (ZIV) gerecht zu werden, wurde 2003 der IKM-Service institutionalisiert. In diesem Rahmen wurde das Projekt Münster Information System for Research and Organization (MIRO) entwickelt, das als Leistungszentrum für Forschungsinformation von der DFG gefördert wird. Die bisherigen Projekterfahrungen, erreichten Ziele und verbleibenden Aufgaben werden dargestellt. Im Projektverlauf haben sich insbesondere die etablierten IT-Governance und Versorgungs-Strukturen sowie die Unterstützung der Hochschulleitung als essentielle Erfolgskriterien erwiesen.

  10. Supply Chain Management (SCM) mit Kanban

    NASA Astrophysics Data System (ADS)

    Beer, Anja; Dickmann, Eva; Dickmann, Philipp; Gerth, Wolf-Michael; Graßy, Mario; Herron, Colin; Schmidt, Peter; Seidl, Florian; Wittmann, Claus-Eduard

    Nach Schätzungen von Mercer Management Consulting und dem Fraunhofer Institut wird der Wertschöpfungsanteil in der Automobilindustrie von durchschnittlich 35 % im Jahr 2002 auf 23 % im Jahr 2015 sinken [Merc 04]. Der Trend, die Produktionstiefe oder allgemeiner, die Wertschöpfungstiefe, zu reduzieren, hat zur Folge, dass die Kaufteile den größeren Teil der Wertschöpfung einnehmen. Die Optimierungspotentiale und der Einfluss auf die Kosten wandern immer mehr zu den Lieferanten, vor allem bei größeren Unternehmen oder Konzernen. Lieferanten-Philosophien, die auf oberflächlichen Verbindungen zu Lieferanten aufbauen, um immer optimal und schnell den günstigsten Teilepreis zu erhalten, haben sich in vielen Sparten oder Produktbereichen, z. B. im Maschinenbau, im besten Fall als kurzfristig erfolgreich erwiesen. Kooperative und nachhaltige Strategien sind der erfolgversprechendere Weg, zumindest mittelbis langfristig. In der Realität wird sehr wenig in Supply Chain-Konzepte investiert und die Umsetzungen sind daher vielmals oberflächlich.

  11. Get Connected

    ERIC Educational Resources Information Center

    Horton, Jessica; Hagevik, Rita; Adkinson, Bennett; Parmly, Jilynn

    2013-01-01

    Technology can be both a blessing and a curse in the classroom. Although technology can provide greater access to information and increase student engagement, if screen time replaces time spent outside, then students stand to lose awareness and connectivity to the surrounding natural environment. This article describes how Google Earth can foster…

  12. Window to the World

    ERIC Educational Resources Information Center

    Cannon, Kama

    2018-01-01

    Although formal papers are typical, sometimes posters or other visual presentations are more useful tools for sharing visual-spatial information. By incorporating creativity and technology into the study of geographical science, STEM (the study of Science, Technology Engineering, and Mathematics) is changed to STEAM (the A stands for ART)! The…

  13. Kostenüberwachung und Wirtschaftlichkeitsrechnung

    NASA Astrophysics Data System (ADS)

    Bauer, Jürgen

    Die ERP-Produktkalkulation erfolgt auf der Basis des Mengen- und Wertgerüsts der Produktionsprozesse. Sie greift dabei auf die Stammdaten (Materialstamm, Arbeitsplätze, Arbeitspläne, Stücklisten) zu. Basis ist die übliche Industriekalkulation in der Form einer Zuschlagskalkulation, ergänzt durch Platzkostensätze der Maschinen und Arbeitsplätze (siehe Teil ).

  14. TÜV - Zertifizierungen in der Life Science Branche

    NASA Astrophysics Data System (ADS)

    Schaff, Peter; Gerbl-Rieger, Susanne; Kloth, Sabine; Schübel, Christian; Daxenberger, Andreas; Engler, Claus

    Life Sciences [1] (Lebenswissenschaften) sind ein globales Innovationsfeld mit Anwendungen der Bio- und Medizinwissenschaften, der Pharma-, Chemie-, Kosmetik- und Lebensmittelindustrie. Diese Branche zeichnet sich durch eine stark interdisziplinäre Ausrichtung aus, mit Anwendung wissenschaftlicher Erkenntnisse und Einsatz von Ausgangsstoffen aus der modernen Biologie, Chemie und Humanmedizin sowie gezielter marktwirtschaftlich orientierter Arbeit.

  15. Did You Know – Transactive Energy Provides the Next Big Step in DER Integration

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McDermott, Thomas E.

    This is an invited blog article for the Utility Variable Generation Integration Group (UVIG) on the topic of distributed energy resource (DER) integration. Summarizes DER progress since 2004, which signifies a maturing industry. Proposes transactive energy as a means of integrating more DER without special incentives or mitigation techniques.

  16. Wie verstehen Schülerinnen und Schüler den Begriff der Unendlichkeit?

    NASA Astrophysics Data System (ADS)

    Schimmöller, Tabea

    Wie Hilbert bereits feststellte, wirkt die Idee der Unendlichkeit, wie keine andere, schon seit Zeiten sehr anregend und fruchtbar auf den Verstand und bewegt das Gemüt der Menschen. Der Begriff der Unendlichkeit bedarf aber auch, wie kein anderer, der Aufklärung, denn mit ihm eröffnet sich ein weites Feld, welches nicht nur aus vielen verschiedenen Definitionen besteht, sondern auch aus völlig unterschiedlichen Disziplinen. Physiker suchen immer dringender nach einer "Theorie für Alles" oder einer "Weltformel", Kosmologen beschäftigen sich unter anderem mit der Ewigkeit des Universums, Theologen interessiert eher die Unendlichkeit Gottes, Philosophen diskutieren unter anderem Grenzfragen zwischen Naturwissenschaft und Philosophie und die Mathematiker versuchen den Paradoxien des Unendlichen einen Sinn zu geben. Und so wird ersichtlich, dass nichts abstrakter ist als das Unendliche: Obwohl die Unendlichkeit für die unterschiedlichsten Wissenschaften von großer Bedeutung ist, "[ist] in der Wirklichkeit das Unendliche nirgends zu finden, [egal] was für Erfahrungen und Beobachtungen und welcherlei Wissenschaft wir auch heranziehen".

  17. [Research on dust mite allergen gathered from filters of air-conditioners].

    PubMed

    Zhan, Xiao-dong; Wu, Hua; Hu, Hui-min; Li, Chao-pin

    2015-12-01

    To discuss the relation between the dust mite allergen (Der) in air-conditioner filters and the asthma attack. The dust samples were collected from the filters of air-conditioners in dining rooms, shopping malls, hotels and households, respectively. The concentrations of Der f 1 and Der p1 were detected by ELISA, and the dust mite immune activities were determined by dot-ELISA. The concentrations of Der f 1 in the dining rooms, shopping malls, hotels and households were 1.52, 1.24, 1.31 µg/g and 1.46 µg/g respectively, and the concentrations of Der p 1 were 1.23, 1.12, 1.16 µg/ g and 1.18 µg, respectively. One hour after the running of air-conditioners, the concentrations of Der f 1 and Der p 1 in the air were higher than those before the running of air-conditioners, and the differences were significant (P < 0.05). Additionally, the dot-ELISA results revealed that the allergen extracted from the dust was capable of reacting with IgE from the sera of asthma mice allergic to dust mites. Der f 1 and Der p 1 appear abundantly in the filters of air-conditioners in domestic houses in Wuhu City, and the allergens can induce asthma.

  18. Wissenschaft, die unsere Kultur verändert. Tiefenschichten des Streits um die Evolutionstheorie

    NASA Astrophysics Data System (ADS)

    Patzelt, Werner J.

    Die Evolutionstheorie ist eine der erfolgreichsten wissenschaftlichen Theorien. Sie erlaubt es, unsere Herkunft zu verstehen und riskante Merkmale gerade der menschlichen Spezies zu begreifen. Zugleich ist die Evolutionstheorie eine der umstrittensten Theorien. Das liegt nicht an ihrer empirischen Tragfähigkeit, sondern an ihrem Gegenstand. Sie handelt nämlich nicht nur - wie Hunderte andere wissenschaftliche Theorien - von der "Welt da draußen“, sondern vor allem auch von uns selbst und von unserem Platz in dieser Welt. Den einen gilt sie obendrein als Überwinderin religiösen Aberglaubens, den anderen als neuer Zugang zu Gott und seinem Wirken in der Welt. Ferner sehen die einen in der Evolution eine unbezweifelbare Tatsache gleich der Schwerkraft oder dem Holocaust, die anderen aber eine - noch oder dauerhaft - unbewiesene Hypothese oder gar eine falsche Schöpfungslehre. Und während die meisten Streitfragen solcher Art nach wechselseitig akzeptierten Regeln ‚normaler Wissenschaft‘ geklärt werden, wird bei der Frage nach dem Woher unserer Spezies und Kultur die intellektuelle Zuständigkeit von Wissenschaft mitunter überhaupt bezweifelt. Anscheinend geht es schon um recht tiefe Schichten unserer Kultur und nicht nur der wissenschaftlichen, wenn - wie seit 150 Jahren - um die Evolutionstheorie gestritten wird. Wie sehen diese Schichten aus?

  19. Single layers and multilayers of GaN and AlN in square-octagon structure: Stability, electronic properties, and functionalization

    NASA Astrophysics Data System (ADS)

    Gürbüz, E.; Cahangirov, S.; Durgun, E.; Ciraci, S.

    2017-11-01

    Further to planar single-layer hexagonal structures, GaN and AlN can also form free-standing, single-layer structures constructed from squares and octagons. We performed an extensive analysis of dynamical and thermal stability of these structures in terms of ab initio finite-temperature molecular dynamics and phonon calculations together with the analysis of Raman and infrared active modes. These single-layer square-octagon structures of GaN and AlN display directional mechanical properties and have wide, indirect fundamental band gaps, which are smaller than their hexagonal counterparts. These density functional theory band gaps, however, increase and become wider upon correction. Under uniaxial and biaxial tensile strain, the fundamental band gaps decrease and can be closed. The electronic and magnetic properties of these single-layer structures can be modified by adsorption of various adatoms, or by creating neutral cation-anion vacancies. The single-layer structures attain magnetic moment by selected adatoms and neutral vacancies. In particular, localized gap states are strongly dependent on the type of vacancy. The energetics, binding, and resulting electronic structure of bilayer, trilayer, and three-dimensional (3D) layered structures constructed by stacking the single layers are affected by vertical chemical bonds between adjacent layers. In addition to van der Waals interaction, these weak vertical bonds induce buckling in planar geometry and enhance their binding, leading to the formation of stable 3D layered structures. In this respect, these multilayers are intermediate between van der Waals solids and wurtzite crystals, offering a wide range of tunability.

  20. Spitznävi: unterschiedliche klinische, dermatoskopische und histopathologische Merkmale in der Kindheit.

    PubMed

    Dika, Emi; Neri, Iria; Fanti, Pier Alessandro; Barisani, Alessia; Ravaioli, Giulia Maria; Patrizi, Annalisa

    2017-01-01

    Die Charakterisierung der klinischen Merkmale und des biologischen Potenzials von Spitznävi hat in den letzten Jahrzehnten breites Interesse gefunden. Das Ziel dieser Arbeit ist die Beschreibung der klinischen und dermatoskopischen Merkmale von Spitznävi sowie des klinischen Ergebnisses nach chirurgischer Exzision von Spitznävi in drei pädiatrischen Altersgruppen. Restrospektive Studie zur Analyse von klinischen Merkmalen, videodermatoskopischen Bildern, histopathologischen Diagnosen und Behandlungsergebnissen. Der Grad der Pigmentierung wurde sowohl klinisch als auch histopathologisch beurteilt. Bei 71 Patienten wurden 72 spitzoide Neoplasien entfernt. Videodermatologische Bilder lagen für 41 Patienten vor. Das Muster der Pigmentierung korrelierte signifikant mit dem Alter der Patienten: Hyperpigmentierte Läsionen waren bei Vorschulkindern selten, bei Patienten von 7 bis 12 Jahren und ab 13 Jahren dagegen häufiger. Eine histopathologische Diagnose von atypischen Spitznävi wurde selten durchgeführt. Keiner der Patienten, bei denen ursprünglich ein atypischer Spitznävus diagnostiziert worden war, entwickelte ein Lokalrezidiv oder Metastasen während der anschließenden Nachbeobachtung. Pigmentierte Spitznävi traten im Alter ab 13 Jahren häufiger auf. Die Studie bestätigt andere Berichte über die Altersverteilung von Pigmentierungsmustern und hebt die geringe Anzahl atypischer Spitznävi bei pädiatrischen Patienten hervor sowie das Ausbleiben von Rezidiven bei der langfristigen Nachbeobachtung. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  1. Big Biology: Supersizing Science During the Emergence of the 21st Century

    PubMed Central

    Vermeulen, Niki

    2017-01-01

    Ist Biologie das jüngste Mitglied in der Familie von Big Science? Die vermehrte Zusammenarbeit in der biologischen Forschung wurde in der Folge des Human Genome Project zwar zum Gegenstand hitziger Diskussionen, aber Debatten und Reflexionen blieben meist im Polemischen verhaftet und zeigten eine begrenzte Wertschätzung für die Vielfalt und Erklärungskraft des Konzepts von Big Science. Zur gleichen Zeit haben Wissenschafts- und Technikforscher/innen in ihren Beschreibungen des Wandels der Forschungslandschaft die Verwendung des Begriffs Big Science gemieden. Dieser interdisziplinäre Artikel kombiniert eine begriffliche Analyse des Konzepts von Big Science mit unterschiedlichen Daten und Ideen aus einer Multimethodenuntersuchung mehrerer großer Forschungsprojekte in der Biologie. Ziel ist es, ein empirisch fundiertes, nuanciertes und analytisch nützliches Verständnis von Big Biology zu entwickeln und die normativen Debatten mit ihren einfachen Dichotomien und rhetorischen Positionen hinter sich zu lassen. Zwar kann das Konzept von Big Science als eine Mode in der Wissenschaftspolitik gesehen werden – inzwischen vielleicht sogar als ein altmodisches Konzept –, doch lautet meine innovative Argumentation, dass dessen analytische Verwendung unsere Aufmerksamkeit auf die Ausweitung der Zusammenarbeit in den Biowissenschaften lenkt. Die Analyse von Big Biology zeigt Unterschiede zu Big Physics und anderen Formen von Big Science, namentlich in den Mustern der Forschungsorganisation, der verwendeten Technologien und der gesellschaftlichen Zusammenhänge, in denen sie tätig ist. So können Reflexionen über Big Science, Big Biology und ihre Beziehungen zur Wissensproduktion die jüngsten Behauptungen über grundlegende Veränderungen in der Life Science-Forschung in einen historischen Kontext stellen. PMID:27215209

  2. Involvement of the mannose receptor in the uptake of Der p 1, a major mite allergen, by human dendritic cells.

    PubMed

    Deslée, Gaëtan; Charbonnier, Anne-Sophie; Hammad, Hamida; Angyalosi, Gerhild; Tillie-Leblond, Isabelle; Mantovani, Alberto; Tonnel, André-Bernard; Pestel, Joël

    2002-11-01

    Immature dendritic cells (DCs) take up antigens in peripheral tissues and, after antigen processing, mature to efficiently stimulate T cells in secondary lymph nodes. In allergic airway diseases DCs have been shown to be involved in the induction and maintenance of a T(H)2-type profile. The present study was undertaken to determine pathways of Der p 1 (a house dust mite allergen) uptake by human DCs and to compare Der p 1 uptake between DCs from patients with house dust mite allergy and DCs from healthy donors. Monocyte-derived DCs (MD-DCs) were obtained from patients with house dust mite allergy (n = 13) and healthy donors (n = 11). Der p 1 was labeled with rhodamine. Der p 1 uptake by MD-DCs was analyzed by means of flow cytometry and confocal microscopy. Rhodamine- labeled Der p 1 was demonstrated to be taken up by MD-DCs in a dose-, time-, and temperature- dependent manner. The involvement of the mannose receptor (MR) in the Der p 1 uptake was demonstrated by using (1) inhibitors of the MR- mediated endocytosis (mannan and blocking anti-MR mAb), which inhibited the Der p 1 uptake from 40 % to 50 %, and (2) confocal microscopy showing the colocalization of rhodamine-labeled Der p 1 with FITC-dextran. Interestingly, compared with DCs from healthy donors, DCs from allergic patients expressed more MR and were more efficient in Der p 1 uptake. These results suggest that the MR could play a key role in the Der p 1 allergen uptake by DCs and in the pathogenesis of allergic diseases in dust mite -sensitive patients.

  3. [Postoperative adjuvante Therapie mit einem Mistelextrakt (Viscum album ssp. album) bei Hündinnen mit Mammatumoren].

    PubMed

    Biegel, Ulrike; Stratmann, Nina; Knauf, Yvonne; Ruess, Katja; Reif, Marcus; Wehrend, Axel

    2017-01-01

    Hintergrund: Canine Mammatumoren (CMT) sind wegen ihrer Häufigkeit und hohen Malignitätsrate eine Herausforderung für die Veterinärmedizin. Bisher ist noch keine postoperative adjuvante Therapie als wirksamer Standard etabliert und in den nächsten Jahren wohl auch nicht zu erwarten. Zusätzlich ist die Frage nach der Verträglichkeit einer adjuvanten Therapie mit Erhaltung oder Verbesserung der Lebensqualität (LQ) wichtig. Die Therapie mit Mistelextrakten (Viscum album L.; VAE) ist in der Humanonkologie nach adjuvanter Tumorbasistherapie (Chemotherapie und Bestrahlung) eine sehr häufig verwendete, zusätzliche adjuvante Behandlungsmethode. Auch bei verschiedenen Tierarten werden inzwischen Mistelpräparate in der Onkologie erfolgreich angewendet. Methoden: Überprüfung von Wirkung und Nutzen einer postoperativen, adjuvanten Misteltherapie beim CMT sowie Erfassung der LQ unter der VAE-Behandlung. Ausgewertet wurden 56 Hündinnen mit Mammaadenokarzinom, 33 ausschließlich operierte Kontrolltiere und 23 operierte Tiere, die adjuvant VAE erhielten. Ergebnisse: Die mediane Überlebenszeit (MST) aller Tiere (n = 56) betrug 32 Monate (Interquartilbereich 13-51 Monate). Im deskriptiven Vergleich der Überlebenszeiten (ST) nach Kaplan-Meier waren nach 12, 24, 36 bzw. 48 Monaten noch 24, 20, 15 bzw. 5 Hündinnen (entsprechend 72,7%, 60,6%, 45,1%, 12,4%) der Kontrollgruppe sowie 19, 14, 11 und 1 Hündin (82,6%, 60,9%, 47,8%, 4,3%) der VAE-Gruppe am Leben. Die VAE-Therapie führte zu einem geringeren Gesamtversterberisiko, das statistisch nicht signifikant war (Hazard Ratio (HR) 0,530, 95%-Konfidenzintervall (KI) 0,222-1,262; p = 0,15). Tendenziell (p = 0,07) zeigte sich eine Verringerung des tumorbedingten Sterberisikos auf 25% (HR 0,251, 95%-KI 0,056-1,122). Schlussfolgerungen: Es kann eine Tendenz zur Senkung des tumorbedingten Sterberisikos der VAE-Gruppe bei guter Verträglichkeit der Therapie angenommen werden. Die LQ der Tiere blieb über die gesamte Beobachtungszeit auf hohem Niveau stabil. © 2017 S. Karger GmbH, Freiburg.

  4. Indoor mite allergens in patients with respiratory allergy living in Porto, Portugal.

    PubMed

    Plácido, J L; Cuesta, C; Delgado, L; da Silva, J P; Miranda, M; Ventas, P; Vaz, M

    1996-09-01

    We investigated the levels of mite allergens (Der p 1, Der f 1, Der 2, and Lep d 1) in dust samples from the homes of 59 patients with asthma, 36 sensitized to house-dust mites (HDM) and 23 to grass pollen (controls), living in Porto, northern Portugal. The relationship between exposure and sensitization to HDM and the influence of housing conditions on mite-allergen levels were also evaluated. Der p 1 (median 9.2 micrograms/g) and Der 2 (4.6 micrograms/g) were the main allergens, while Der f 1 and Lep d 1 levels were always < 1 microgram/g dust and undetectable in 11% and 47% of samples, respectively. All HDM-sensitized asthmatics were exposed to Der p 1 levels > 2 micrograms/g and their homes contained significantly higher levels of Der p 1 (median 12.5 vs 6.4 micrograms/g; P = 0.008) and Der 2 (6.2 vs 3.0 micrograms/g; P = 0.004) when compared to the control group. A significant correlation was observed between the exposure to Der p 1 and the wheal area at skin testing with the Dermatophagoides pteronyssinus (Dp) extract (P = 0.01) as well as with serum specific IgE levels to Dp (P = 0.03). Patients with higher levels of serum specific IgE (> or = 17.5 HRU/ml) were also more frequently exposed to Der p 1 levels > or = 10 micrograms/g (P = 0.002). Old homes, presence of carpets, and signs of dampness were conditions associated with significantly higher levels of mite allergens. In conclusion, we found high levels of Der p 1 and Der 2 particularly in the homes of HDM-sensitized patients and we confirm the relationship between exposure and sensitization to HDM, assessed by both in vivo and in vitro methods. In additional to a favorable outdoor climate, we found in our region housing conditions propitious to mite growth, suggesting that specific geographic characteristics must also be taken into account for the correct planning of mite-avoidance measures.

  5. Implementing a bar-code assisted medication administration system: effects on the dispensing process and user perceptions.

    PubMed

    Samaranayake, N R; Cheung, S T D; Cheng, K; Lai, K; Chui, W C M; Cheung, B M Y

    2014-06-01

    We assessed the effects of a bar-code assisted medication administration system used without the support of computerised prescribing (stand-alone BCMA), on the dispensing process and its users. The stand-alone BCMA system was implemented in one ward of a teaching hospital. The number of dispensing steps, dispensing time and potential dispensing errors (PDEs) were directly observed one month before and eight months after the intervention. Attitudes of pharmacy and nursing staff were assessed using a questionnaire (Likert scale) and interviews. Among 1291 and 471 drug items observed before and after the introduction of the technology respectively, the number of dispensing steps increased from five to eight and time (standard deviation) to dispense one drug item by one staff personnel increased from 0.8 (0.09) to 1.5 (0.12) min. Among 2828 and 471 drug items observed before and after the intervention respectively, the number of PDEs increased significantly (P<0.001). 'Procedural errors' and 'missing drug items' were the frequently observed PDEs in the after study. 'Perceived usefulness' and 'job relevance' of the technology decreased significantly (P=0.003 and P=0.004 respectively) among users who participated in the before (N=16) and after (N=16) questionnaires surveys. Among the interviewees, pharmacy staff felt that the system offered less benefit to the dispensing process (9/16). Nursing staff perceived the system as useful in improving the accuracy of drug administration (7/10). Implementing a stand-alone BCMA system may slow down and complicate the dispensing process. Nursing staff believe the stand-alone BCMA system could improve the drug administration process but pharmacy staff believes the technology would be more helpful if supported by computerised prescribing. However, periodical assessments are needed to identify weaknesses in the process after implementation, and all users should be educated on the benefits of using this technology. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  6. The Shock and Vibration Digest. Volume 12, Number 12,

    DTIC Science & Technology

    1980-12-01

    accelerations is presented. R.G. Schwarz It is shown that while the technique is theoretically cor- Fortschritt-Berichte der VDI -Zt., Series 8, No. 30, rect, it...is subject to experimental limitations due to in- 188 pp, 22 figs, 7 tables (1980). Summary in VDI -Z accuracies in current accelerometer technology...relationship of the so- better understanding of the fatigue life of wind turbine called K-value of the proposed standard VDI 2057 to the pal blades

  7. Examining the Citizenship and Democracy Education Textbook and Curriculum in Terms of Global Education=Küresel Egitim Çerçevesinde Vatandaslik ve Demokrasi Egitimi Ders Kitabi ve Ögretim Programi

    ERIC Educational Resources Information Center

    Günel, Elvan; Pehlivan, Aysegül

    2015-01-01

    As a result of scientific and technological developments in today's world, global education has started to take its place in the educational systems throughout the world and become more significant in recent years. Since global education has multiple effects on societies, it is also crucial in helping students to become informed, active, and…

  8. Möglichkeiten und Grenzen der genetischen Manipulation

    NASA Astrophysics Data System (ADS)

    Klingmüller, Walter

    1981-03-01

    Examples for genetic engineering are the transfer of nuclei between cells of higher animals and the introduction of heterologous DNA into bacteria by means of plasmids. The former approach will help to establish new ways in animal breeding, the latter provides bacterial cells that produce proteins of medical importance. The moral justification of related studies in man is still open, but the possible risks of gene technology can be coped with by adhering to proper safety regulations.

  9. IFLA General Conference, 1990. Division of Special Libraries: Section of Administrative Libraries; Section of Social Science Libraries; Section of Science and Technology Libraries; Section of Biological and Medical Sciences Libraries; Section of Art Libraries. Booklet 2.

    ERIC Educational Resources Information Center

    International Federation of Library Associations, The Hague (Netherlands).

    The 23 papers in this collection were presented at 5 sections of the Division of Special Libraries: (1) "Principles of Government Librarianship" (Hans H. van der Neut); (2) "Strategic Planning as an Instrument of Improving Library Quality" (Maurice B. Line); (3) "Library Staff Development Consultancy: A Means to Achieve a…

  10. Direct measurements of conductivity and mobility in millimeter-sized single-crystalline graphene via van der Pauw geometry

    NASA Astrophysics Data System (ADS)

    Ma, Rui-Song; Huan, Qing; Wu, Liang-Mei; Yan, Jia-Hao; Zhang, Yu-Yang; Bao, Li-Hong; Liu, Yun-Qi; Du, Shi-Xuan; Gao, Hong-Jun

    2017-06-01

    Not Available Project supported by the Science Fund from the Ministry of Science and Technology of China (Grant No. 2013CBA01600), the National Key Research & Development Project of China (Grant No. 2016YFA0202300), the National Natural Science Foundation of China (Grant Nos. 61474141, 61674170, 61335006, 61390501, 51325204, and 51210003), the Chinese Academy of Sciences (CAS), and Youth Innovation Promotion Association of CAS (Grant No. 20150005).

  11. Stabilität

    NASA Astrophysics Data System (ADS)

    Horn, Joachim

    Für die Stabilität eines linearen, zeitinvarianten Übertragungsgliedes existieren verschiedene Definitionen. Bei der asymptotischen Stabilität wird gefordert, dass der Systemausgang nach einer kurzzeitigen Systemanregung mit wachsender Zeit wieder gegen Null geht. Bei der BIBO-Stabilität (Bounded Input-Bounded Output) wird gefordert, dass bei einem beschränkten Systemeingang der Systemausgang ebenfalls beschränkt ist.

  12. Musikalische Akustik

    NASA Astrophysics Data System (ADS)

    Meyer, Jürgen

    Im weitesten Sinne umfasst die musikalische Akustik alle Themenbereiche, in denen Akustik und Musik in irgendeiner Form miteinander verbunden sind oder zumindest gleichzeitig eine Rolle spielen (Meyer 2004a). Im Mittelpunkt steht dabei die Akustik der Musikinstrumente und Gesangsstimmen, die sich mit der physikalischen Funktionsweise einschließlich der Einflussmöglichkeiten des Spielers auf die Tongestaltung und mit der Schallabstrahlung einschließlich der Klangeigenarten und der Richtungsabhängigkeit befasst (Meyer 2004b, Fletcher u. Rossing 1991). Sobald dabei klangästhetische Gesichtspunkte mit ins Spiel kommen, ist eine Einbeziehung psychoakustischer Aspekte unumgänglich. Erst auf dieser Grundlage ist eine qualitative Bewertung von Instrumenten möglich, die es den Instrumentenbauern erlaubt, anhand objektiver Kriterien bautechnische Veränderungen zur Verbesserung ihrer Instrumente vorzunehmen.

  13. Rehabilitation Engineering & Assistive Technology Society (RESNA) position on the application of wheelchair standing devices: 2013 current state of the literature.

    PubMed

    Dicianno, Brad E; Morgan, Amy; Lieberman, Jenny; Rosen, Lauren

    2016-01-01

    This article, approved by the Rehabilitation Engineering & Assistive Technology Society of North America Board of Directors on December 23, 2013, shares typical clinical applications and provides evidence from the literature supporting the use of wheelchair standers.

  14. Estimating Rhododendron maximum L. (Ericaceae) Canopy Cover Using GPS/GIS Technology

    Treesearch

    Tyler J. Tran; Katherine J. Elliott

    2012-01-01

    In the southern Appalachians, Rhododendron maximum L. (Ericaceae) is a key evergreen understory species, often forming a subcanopy in forest stands. Little is known about the significance of R. maximum cover in relation to other forest structural variables. Only recently have studies used Global Positioning System (GPS) technology...

  15. Optimisation of biomass productivity of black locust (Robinia pseudoacacia L.) on marginal lands - a case study in Lower Lusatia, NE Germany

    NASA Astrophysics Data System (ADS)

    Seserman, Diana-Maria; Veste, Maik; Freese, Dirk

    2017-04-01

    The profitability of reclaiming post-mining areas depends on the tree biomass productivity and the restoration of ecosystem functions, such as improving soil and water quality. Agroforestry systems, regarded as combined land-use systems of trees and crops, have the ability to facilitate soil development while reducing wind speed, soil erosion and evaporation. Achieving the maximum biomass productivity of the tree stands depends on the corresponding soil conditions and water availability, but is also influenced by stand structure and the competition between individual trees. For this purpose, black locust (Robinia pseudoacacia L.) trees were planted in a Nelder design in 2010, on a reclaimed post-mining site of the open-cast lignite mining in Welzow Süd (Brandenburg, Germany). Black locust is regarded as a drought-adapted tree species and commonly used for the reclamation of former lignite mining sites in Lower Lusatia, Germany. The Nelder design encompasses angles of arc of equal measure and with the same origin traversed by successive circumferences set at a predefined radial distance. Accordingly, a total of 1071 trees were planted in Welzow Süd at the intersection between 63 spokes and 17 circumferences and at densities ranging from 0.4 to 8.0 m2, with the aim of examining the influence of stand density on the tree growth in a timeframe of six years. In order to evaluate the biomass production of the trees and to determine an optimal planting density on a marginal land, various scenarios were assessed with the help of the Yield-SAFE model, a parameter-sparse process-based agroforestry model. The study revealed the consequences of choosing different tree densities on the tree biomass productivity and water use of trees in relation to the competition for light and water. References Keesman KJ, van der Werf W, van Keulen H, 2007. Production ecology of agroforestry systems: A minimal mechanistic model and analytical derivation of the land equivalent ratio. Mathematical Biosciences, vol. 209, pp. 608-623. Mantovani D, Veste M, Böhm C, Vignudelli M, Freese D, 2015. Drought impact on the spatial and temporal variation of growth performance and plant water status of black locust (Robinia pseudoacacia L.) in agroforestry systems in Lower Lusatia (Germany). iForest 8, 743-757. Mantovani D, Veste M, Freese D, 2014. Black locust (Robinia pseudoacacia L.) ecophysiological and morphological adaptations to drought and their consequence on biomass production and water use efficiency. New Zealand Journal of Forestry 44, 29. van der Werf W, Keesman K, Burgess PJ, Graves AR, Pilbeam D, Incoll LD, Metselaar K, Mayus M, Stappers R, van Keulen H, Palma JHN, Dupraz C, 2007. Yield-SAFE: a parameter-sparse process-based dynamic model for predicting resource capture, growth and production in agroforestry systems. Ecological Engineering, vol. 29, pp. 419-433.

  16. Fitbit Activity Trackers Interrupt Workplace Sedentary Behavior: A New Application.

    PubMed

    Guitar, N A; MacDougall, A; Connelly, D M; Knight, E

    2018-05-01

    This study investigated whether Fitbit devices can reduce sedentary behavior among employees in the workplace. Participants were asked to wear Fitbits during 8-hour work shifts, 5 days per week, for 8 weeks. They were instructed to stand at least once every 30 minutes throughout the workday. The goal of the study was to determine whether standing once every 30 minutes was a feasible strategy for reducing sedentary workplace behavior. On average, participants completed 36 of 40 workdays using Fitbits. The number of times participants stood during an 8-hour workday averaged 12 stands per day (maximum 16 stands per day). These results indicate that Fitbit technology is effective for recording and tracking interruptions in sitting time; however, to reduce sitting behavior, alternate approaches are required to motivate larger numbers of workers to participate.

  17. Collective Protection (COLPRO) Novel Closures Testing

    DTIC Science & Technology

    2013-03-28

    science and technology programs for future ColPro systems may include interfaces such as novel designs using zippers, hook-and-pile closures, and...necessitate new testing procedures. Additionally, stand- ards of performance must be adjusted as technologies advance. Test procedures and parameters...listed in this TOP may require updating to accommodate new technologies in test items or in test instrumentation. Any variation to the TOP procedures

  18. Standing on the Shoulders of Giants: Where Do We Go from Here to Bring the Fire Service into the Domestic Intelligence Community?

    DTIC Science & Technology

    2012-09-01

    49 B. AREAS FOR FURTHER STUDY ...............................................................49 C. LEVERAGING CURRENT TECHNOLOGY AND THE FUTURE...Working Group also monitored network governance developments necessary to renovate existing DHS computer-based communication channels and technological ... technology ? b. What role does suspicious activity reporting play? 24 With these questions in mind, policies and plans related to intelligence

  19. Kompressionstherapie bei Patienten mit Ulcus cruris venosum.

    PubMed

    Dissemond, Joachim; Assenheimer, Bernd; Bültemann, Anke; Gerber, Veronika; Gretener, Silvia; Kohler-von Siebenthal, Elisabeth; Koller, Sonja; Kröger, Knut; Kurz, Peter; Läuchli, Severin; Münter, Christian; Panfil, Eva-Maria; Probst, Sebastian; Protz, Kerstin; Riepe, Gunnar; Strohal, Robert; Traber, Jürg; Partsch, Hugo

    2016-11-01

    Wund-D.A.CH. ist der Dachverband deutschsprachiger Fachgesellschaften, die sich mit den Thematiken der Wundbehandlung beschäftigen. Experten verschiedener Fachgesellschaften aus Deutschland, Österreich und der Schweiz haben nun einen aktuellen Konsens der Kompressionstherapie für Patienten mit Ulcus cruris venosum erstellt. In Europa ist das Ulcus cruris venosum eine der häufigsten Ursachen für chronische Wunden. Neben der konservativen und interventionellen Wund- und Venentherapie, ist die Kompressionstherapie die Basis der Behandlungsstrategien. Die Kompressionstherapie kann heute mit sehr unterschiedlichen Materialien und Systemen durchgeführt werden. Während in der Entstauungsphase insbesondere Verbände mit Kurzzugbinden oder Mehrkomponentensysteme zur Anwendung kommen, sind es anschließend überwiegend Ulkus-Strumpfsysteme. Eine weitere, bislang wenig verbreitete Alternative sind adaptive Kompressionsbandagen. Insbesondere für die Rezidivprophylaxe werden medizinische Kompressionsstrümpfe empfohlen. Durch die Vielzahl der heute zur Verfügung stehenden Behandlungsoptionen, kann für nahezu alle Patienten ein Konzept entwickelt werden, dass sich an den individuellen Bedürfnissen und Fähigkeiten orientiert und daher auch akzeptiert und durchgeführt wird. Die Kompressionstherapie ist für die Behandlung von Patienten mit Ulcus cruris venosum essentiell. In den letzten Jahren sind viele verschiedene Therapieoptionen verfügbar, die in den deutschsprachigen Ländern unterschiedlich angewendet oder durchgeführt werden. Daher soll dieser Expertenkonsens dazu beitragen, konkrete Empfehlungen für die praktische Durchführung der Kompressionstherapie von Patienten mit Ulcus cruris venosum darzustellen. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  20. Dilution Refrigerator Technology for Scalable Quantum Computing

    DTIC Science & Technology

    2014-05-22

    Faraday cage but we did not do this for vibration concerns. 3. 90 degree Aeroquip fitting This elbow can be used (or not) depending upon where you...place. 4. Gas ballast tanks We have them mounted inside of the Faraday cage 5. Gas handling system Everything in this picture is...lines will work for your installation. 11. Cryostat test stand and faraday cage We were not planning on sending the test stand because it is

  1. Forschungspolitik USA weisen zunehmend ausländische Physikstudenten ab

    NASA Astrophysics Data System (ADS)

    Bührke, Thomas

    2003-11-01

    In keinem anderen Land der Erde ist der Anteil ausländischer Studenten im Fach Physik größer als in den USA. Nach den Terroranschlägen vom 11. September werden jedoch zunehmend ausländische Studenten, insbesondere aus China und dem mittleren Osten, abgewiesen - zum Leidwesen der Studenten und der Universitäten.http://www.aip.org/statistics

  2. Aus Wirtschaft und Betrieb. Biomasse: Gewinnung und Verarbeitung mit Profilschal-maschinen

    Treesearch

    P. Koch

    1977-01-01

    1963 wurden in den Südstaaten der USA nur 30% der oberund unterirdischen Biomasse der geernteten sog. Southern pines für Schnittholz und Zellstoff verwertet bzw. als getrockneies, gehobletes und abgelängtes Schnittholz oder als Kraftpapier verkauft. Keine der zusammen mit den Kiefern vorkommenden Laubholzarten wurde bisher in nennenswertem Umfan verwertet. Auch heute...

  3. Activation of mas-related G-protein-coupled receptors by the house dust mite cysteine protease Der p1 provides a new mechanism linking allergy and inflammation.

    PubMed

    Reddy, Vemuri B; Lerner, Ethan A

    2017-10-20

    Cysteine and serine proteases function via protease-activated and mas-related G-protein-coupled receptors (Mrgprs) to contribute to allergy and inflammation. Der p1 is a cysteine protease and major allergen from the house dust mite and is associated with allergic rhinitis and allergic asthma. Der p1 activates protease-activated receptor 2 and induces the release of the pro-inflammatory cytokine IL-6 from cells. However, the possibility that Der p1 acts on Mrgprs has not been considered. We report here that ratiometric calcium imaging reveals that Der p1 activates the human receptor MRGPRX1 and the mouse homolog MrgprC11, implicated previously in itch. Der p1 cleavage of N-terminal receptor peptides followed by site-directed mutagenesis of the cleavage sites links receptor activation to specific amino acid residues. Der p1 also induced the release of IL-6 from heterologous cells expressing MRGPRX1. In summary, activation of Mrgprs by the allergen Der p1 may contribute to inflammation. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  4. Einleitung

    NASA Astrophysics Data System (ADS)

    Ha, Suk-Woo; Wintermantel, Erich

    Der Aufbau des menschlichen Körpers ist derart komplex, dass die vollständige funktionelle Substitution seiner Strukturen mit künstlichen Werkstoffen und Bauteilen unwahrscheinlich ist. Die meisten heute klinisch eingesetzten Implantate ersetzen in der Regel einfache mechanische oder andere physikalische Funktionen des menschlichen Körpers, die aufgrund eines singulären Defektes im Gewebe oder als Ergebnis einer chronischen Erkrankung substituiert werden müssen. Gelenkprothesen beispielsweise übertragen Lasten, eine künstliche intraokulare Linse ermöglicht Lichttransmission und eine künstliche Arterie sorgt für die Aufrechterhaltung der Blutversorgung. Neben der Funktionserfüllung müssen die medizinisch eingesetzten Werkstoffe zusätzlich den Anforderungen der Körperverträglichkeit genügen, die die vollständige und dauerhafte Aufnahme des Implantates im Körper zum Ziel hat. Die Erkenntnisse der Werkstoffwissenschaft und deren Umsetzung in neue Produkte hat die Entwicklung und Fortschritte in der Medizin und in der Chirurgie entscheidend geprägt. Werkstoffe stehen in ihrem klinischen Einsatz als Temporärimplantate (z. B. Kathetersysteme) sowie als Langzeitimplantate (z. B. Hüftgelenksimplantate oder Herzschrittmacher) in direktem Kontakt mit den Geweben des Körpers und müssen deshalb biokompatibel sein.

  5. Der evolutionäre Naturalismus in der Ethik

    NASA Astrophysics Data System (ADS)

    Kaiser, Marie I.

    Charles Darwin hat eindrucksvoll gezeigt, dass der Mensch ebenso wie alle anderen Lebewesen ein Produkt der biologischen Evolution ist. Die sich an Darwin anschließende Forschung hat außerdem plausibel gemacht, dass sich nicht nur viele der körperlichen Merkmale des Menschen, sondern auch (zumindest einige) seiner Verhaltensdispositionen in adaptiven Selektionsprozessen herausgebildet haben. Die Vorstellung, dass auch die menschliche Moralität evolutionär bedingt ist, scheint daher auf den ersten Blick ganz überzeugend. Schließlich hat die Evolutionstheorie in den vergangenen Jahrzehnten in vielen Bereichen (auch außerhalb der Biologie) ihre weitreichende Bedeutung unter Beweis gestellt. Warum sollte, so könnte man beispielsweise fragen, gerade die Fähigkeit des Menschen, moralische Normen aufzustellen und gemäß ihnen zu handeln, nicht evolutionär erklärt werden können? Und warum sollte eine solche evolutionäre Erklärung der menschlichen Moralität irrelevant für die Rechtfertigung moralischer Normen sein? Warum sollte die Ethik eine Bastion der Philosophen bleiben, für die evolutionsbiologische Forschungsergebnisse über den Menschen und seine nächsten Verwandten keinerlei Relevanz besitzen?

  6. Comparative analysis of biological activities of Der p I-derived peptides on Fc epsilon receptor-bearing cells from Dermatophagoides pteronyssinus-sensitive patients.

    PubMed Central

    Jeannin, P; Pestel, J; Bossus, M; Lassalle, P; Tartar, A; Tonnel, A B

    1993-01-01

    The ability of four uncoupled synthetic peptides (p52-71, p117-133, p176-187, p188-199) derived from Der p I, a major allergen from the house dust mite Dermatophagoides pteronyssinus (Dpt) to stimulate Fc epsilon R+ cells from Dpt-sensitive patients was comparatively analysed. Each free peptide may specifically stimulate basophils (Fc epsilon RI+ cells) and platelets (Fc epsilon RII+ cells) from patients with significant levels of anti-Der p I IgE antibodies; p52-71 and p117-133 appear the best cell stimulation inducers. Both concentration-dependent biological activities of Der p I-peptide on Fc epsilon R+ cells are enhanced by coupling peptide to a carrier (as human serum albumin). Interestingly each Der p I-sensitive patient tested presents an individual pattern of response to peptide. Thus, from our results it appears that different Der p I sequences could be involved in the immune response to Der p I. PMID:7682161

  7. Comparative analysis of biological activities of Der p I-derived peptides on Fc epsilon receptor-bearing cells from Dermatophagoides pteronyssinus-sensitive patients.

    PubMed

    Jeannin, P; Pestel, J; Bossus, M; Lassalle, P; Tartar, A; Tonnel, A B

    1993-04-01

    The ability of four uncoupled synthetic peptides (p52-71, p117-133, p176-187, p188-199) derived from Der p I, a major allergen from the house dust mite Dermatophagoides pteronyssinus (Dpt) to stimulate Fc epsilon R+ cells from Dpt-sensitive patients was comparatively analysed. Each free peptide may specifically stimulate basophils (Fc epsilon RI+ cells) and platelets (Fc epsilon RII+ cells) from patients with significant levels of anti-Der p I IgE antibodies; p52-71 and p117-133 appear the best cell stimulation inducers. Both concentration-dependent biological activities of Der p I-peptide on Fc epsilon R+ cells are enhanced by coupling peptide to a carrier (as human serum albumin). Interestingly each Der p I-sensitive patient tested presents an individual pattern of response to peptide. Thus, from our results it appears that different Der p I sequences could be involved in the immune response to Der p I.

  8. Verbesserung der Symmetrie von Hirnaufnahmen entlang der Sagittalebene

    NASA Astrophysics Data System (ADS)

    Ens, Konstantin; Wenzel, Fabian; Fischer, Bernd

    Die lokale Symmetrie von Hirnscans entlang der Sagittalebene zu ermitteln und zu modizifieren, ist für eine Reihe neurologischer Anwendungen interessant. Beispielsweise kann der voxelweise Vergleich von rechter und linker Hirnhälfte nur dann Aufschluss über die Lokalisierung von Läsionen geben, wenn durch Transformation ein Hirnscan eine möglichst hohe Symmetrie aufweist. Ein weiteres Anwendungsgebiet ist die Visualisierung von medialen Hirnschnitten, für die die Trennfläche beider Hirnhälfte möglichst eben sein sollte. Diese Arbeit stellt die Entwicklung eines Verfahrens vor, mit dessen Hilfe die Symmetrie von Hirnaufnahmen entlang der Sagittalebene verbessert werden kann. Dies geschieht unter Verwendung von aktiven Konturen, die mit Hilfe einer neuartigen Kostenfunktion gesteuert werden. Experimente am Ende der Arbeit mit strukturellen Kernspinaufnahmen demonstrieren die Leistungsfähigkeit des Verfahrens.

  9. Niederschlag

    NASA Astrophysics Data System (ADS)

    Kunz, Michael; Mohr, Susanna; Werner, Peter C.

    Niederschlag kann in flüssiger Form als Niesel oder Regen oder in gefrorener, fester Form als Graupel, Hagel oder Schnee fallen. Durch die globale Erwärmung intensiviert sich der Wasserkreislauf, was zu einer Veränderung der Niederschlagsmuster führt. Außerdem ist zu erwarten, dass sich im Zuge des Klimawandels auch die Häufigkeit bestimmter Wetterlagen ändern wird, die das Niederschlagsgeschehen grundsätzlich bestimmen. Bereits heute ist in Deutschland eine Änderung der Niederschlagsaktivität zu beobachten. Das Kapitel beschäftigt sich neben den sommerlichen und winterlichen Starkniederschlagsereignissen auch mit Hagelereignissen und dem Schneefall. Neben einer Zusammenfassung der bereits beobachteten Änderungen dieser Niederschlagsformen in der Vergangenheit wird auch der Frage nachgegangen, inwieweit man für diese Ereignisse belastbare Aussagen für die Zukunft treffen kann.

  10. Der Begriff der Verständlichkeit in der modernen Physik (1948).

    PubMed

    Feyerabend, Paul K

    2016-06-01

    This is a critical transcription of Paul Feyerabend's earliest extant essay "Der Begriff der Verständlichkeit in der modernen Physik" (1948) recovered from the European Forum Alpbach archives. In it, Feyerabend defends positivism as a progressive framework for scientific research in certain stages of scientific development. He argues that in physics visualizability (Anschaulichkeit) and intelligibility (Verständlichkeit) are time-conditioned concepts: what is deemed visualizable in the development of physical theories is relative to a specific historical context and changes over time. He concludes that from time to time the abandonment of visualizability is crucial for progress in physics, as it is conducive to major theory change, illustrating the point on the basis of advances in atomic theory. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. AMANDA and D0 as a Test Environment for the LHC Computing Grid (in German)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Harenberg, Torsten

    2005-08-01

    Die Suche nach den Grundbausteinen der Materie und nach den Kräften, die zwischen ihnen wirken, ist das Forschungsgebiet der Hochenergiephysik. Mit immer größer werdenden Teilchenbeschleunigern erreicht man immer tiefer gehende Erkenntnisse und dringt dabei in Energiebereiche vor, wie sie kurz nach dem Urknall herrschten. Im Moment ist das Tevatron am Fermilab der energ piereichste Teilchenbeschleuniger der Welt mit einer Schwerpunktsenergie von √s = 1, 96 TeV. Um die bei diesen hohen Energien entstehende Anzahl von Teilchen zu messen, sind auch immer höher auflösende Detektoren nötig. Dem wurde dadurch Rechnung getragen, dass mit der Steigerung der Schwerpunktsenergie am Tevatron auch diemore » Detektoren DØ und CDF1) teilweise erneuert wurden.« less

  12. Instandhaltungsmanagement als Gestaltungsfeld Ganzheitlicher Produktionssysteme

    NASA Astrophysics Data System (ADS)

    Dombrowski, Uwe; Schulze, Sven; Otano, Isabel Crespo

    Sich kontinuierlich verändernde Rahmenbedingungen, wie beispielsweise eine steigende Variantenvielfalt, verkürzte Produktlebenszyklen sowie Kundenforderungen nach höherer Qualität, kürzeren Lieferzeiten und geringeren Kosten, fordern von produzierenden Unternehmen eine stetige Anpassung der Prozesse, der Organisation und der Strukturen. Seit den 90er Jahren versuchen immer mehr deutsche Unternehmen diesen veränderten Anforderungen mit der Einführung eines Ganzheitlichen Produktionssystems (GPS) zu begegnen. Ganzheitliche Produktionssysteme sind dabei in ihren Grundlagen an das Toyota Produktionssystem angelehnt, vereinigen aber auch weitere Methoden zu einem unternehmensspezifischen Regelwerk. Im Rahmen des langfristigen Trends zu unternehmensindividuellen Produktionssystemen wird sowohl in der Industrie als auch in der Forschung intensiv über das Toyota Produktionssystem, Lean Production, Lean Management und Ganzheitliche Produktionssysteme diskutiert, werden Konzepte zu Implementierung und Betrieb erstellt und die Wirtschaftlichkeit untersucht.

  13. S2k-Leitlinie zum Gebrauch von Präparationen zur lokalen Anwendung auf der Haut (Topika).

    PubMed

    Wohlrab, Johannes; Staubach, Petra; Augustin, Matthias; Eisert, Lisa; Hünerbein, Andreas; Nast, Alexander; Reimann, Holger; Strömer, Klaus; Mahler, Vera

    2018-03-01

    Diese Leitlinie richtet sich an Assistenz- und Fachärzte der Dermatologie sowie an Kostenträger und politische Entscheidungsgremien. Die Leitlinie wurde im formellen Konsensusverfahren (S2k) von Dermatologen unter Einbindung von Apothekern erstellt. Die Leitlinie stellt allgemeine Aspekte der Pharmakokinetik sowie der regulatorischen Begrifflichkeiten dar. Es werden Empfehlungen zur Indikation von Magistralrezepturen sowie deren Qualitätssicherung gegeben. Die Bedeutung der galenischen Grundlagen und die Problematik bei einer Substitution gegeneinander verschiedener Grundlagen werden dargestellt. Die Leitlinie umfasst Kriterien zur Auswahl einer adäquaten Grundlage sowie spezifische Aspekte zur Therapieplanung. Die Leitlinie gibt Empfehlungen zum Management bei Unverträglichkeiten gegenüber Bestandteilen der Grundlagen oder Hilfsstoffe. © 2018 The Authors | Journal compilation © Blackwell Verlag GmbH, Berlin.

  14. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Johnson, Jay Tillay

    For three years, Sandia National Laboratories, Georgia Institute of Technology, and University of Illinois at Urbana-Champaign investigated a smart grid vision in which renewable-centric Virtual Power Plants (VPPs) provided ancillary services with interoperable distributed energy resources (DER). This team researched, designed, built, and evaluated real-time VPP designs incorporating DER forecasting, stochastic optimization, controls, and cyber security to construct a system capable of delivering reliable ancillary services, which have been traditionally provided by large power plants or other dedicated equipment. VPPs have become possible through an evolving landscape of state and national interconnection standards, which now require DER to include grid-supportmore » functionality and communications capabilities. This makes it possible for third party aggregators to provide a range of critical grid services such as voltage regulation, frequency regulation, and contingency reserves to grid operators. This paradigm (a) enables renewable energy, demand response, and energy storage to participate in grid operations and provide grid services, (b) improves grid reliability by providing additional operating reserves for utilities, independent system operators (ISOs), and regional transmission organization (RTOs), and (c) removes renewable energy high-penetration barriers by providing services with photovoltaics and wind resources that traditionally were the jobs of thermal generators. Therefore, it is believed VPP deployment will have far-reaching positive consequences for grid operations and may provide a robust pathway to high penetrations of renewables on US power systems. In this report, we design VPPs to provide a range of grid-support services and demonstrate one VPP which simultaneously provides bulk-system energy and ancillary reserves.« less

  15. Analytische Geometrie

    NASA Astrophysics Data System (ADS)

    Kemnitz, Arnfried

    Der Grundgedanke der Analytischen Geometrie besteht darin, dass geometrische Untersuchungen mit rechnerischen Mitteln geführt werden. Geometrische Objekte werden dabei durch Gleichungen beschrieben und mit algebraischen Methoden untersucht. Behandelt werden folgende Themen: Koordinatensysteme: Kartesisches Koordinatensystem der Ebene und des Raumes, Polarkoordinatensystem der Ebene, Zusammenhang zwischen kartesischen und Polarkoordinaten; Geraden: Geradengleichungen, Abstände von Geraden; Kreise: Kreisgleichungen, Kreisberechnungen; Kugeln; Kegelschnitte; Ellipsen; Hyperbeln; Parabeln; Anwendungen von Kegelschnitten aus Technik und Mathematik; Vektoren: Definitionen, Addition, Multiplikation, Komponentendarstellung in der Ebene und im Raum, Skalarprodukt, Vektorprodukt. Zu den einzelnen Themenkreisen sind Beispiele aufgeführt. Wichtige Regeln und Gesetze sind durch Umrandung besonders kenntlich gemacht.

  16. Information Interaction Study for DER and DMS Interoperability

    NASA Astrophysics Data System (ADS)

    Liu, Haitao; Lu, Yiming; Lv, Guangxian; Liu, Peng; Chen, Yu; Zhang, Xinhui

    The Common Information Model (CIM) is an abstract data model that can be used to represent the major objects in Distribution Management System (DMS) applications. Because the Common Information Model (CIM) doesn't modeling the Distributed Energy Resources (DERs), it can't meet the requirements of DER operation and management for Distribution Management System (DMS) advanced applications. Modeling of DER were studied based on a system point of view, the article initially proposed a CIM extended information model. By analysis the basic structure of the message interaction between DMS and DER, a bidirectional messaging mapping method based on data exchange was proposed.

  17. Roboter in der Raumfahrt

    NASA Astrophysics Data System (ADS)

    Hirzinger, G.

    (Robots in space)—The paper emphasizes the enormous automation impact in industry caused by microelectronics, a "byproduct" of space-technology. The evolutionary stages of robotic are outlined and it is shown that there are a lot of reasons for more automation, artificial intelligence and robotic in space, too. The telemanipulator concept is compared with the industrial robot concept, both showing up an increasing degree of similarity. The state of the art in sensory systems is discussed. By hand of the typical operations needed in space as rendezvous, assembly and docking the required robot skill is indicated. As a conclusion it is stated that the basic technologies available with industrial robots today could solve a lot of space problems. What remains to do—apart of course from ongoing research—is better integration and adaption of industrial techniques to the need of space technology.

  18. Romanistik ohne Latein? Zu einer Empfehlung der Konferenz der Romanischen Seminare (Romance Studies without Latin? On a Recommendation from the Conference of Romance Seminars)

    ERIC Educational Resources Information Center

    Neumeister, Sebastian

    1973-01-01

    Reaction to a February 19, 1972 recommendation of the Konferenz der Romanischen Seminare der Bundesrepublik Deutschland und West-Berlins in Deutschen Romanistenverband'' (Conference of Romance Seminars of the Federal Republic of Germany and West Berlin of the German Association of Romance Philologists) to discontinue the Latin prerequisite for…

  19. Wirkungen biogener Amine auf die Erregungs-Sekretions-Kopplung in der Speicheldrüse von Periplaneta americana (L.)

    NASA Astrophysics Data System (ADS)

    Rietdorf, Katja

    2003-07-01

    In der vorliegenden Arbeit habe ich wichtige Teilmechanismen der Erregungs-Sekretionskopplung in der Speicheldrüse der Schabe Periplaneta americana (L.) untersucht. Die Speicheldrüse ist von dopaminergen und serotonergen Fasern innerviert (Baumann et al., 2002). Beide Transmitter stimulieren eine unterschiedliche Reaktion der Drüse: Dopamin (DA) stimuliert die P-Zellen der Acini und die Ausführgangzellen, während Serotonin (5-HT) die P- und C-Zellen der Acini stimuliert, nicht jedoch die Ausführgangzellen. Der Endspeichel ist nach einer DA-Stimulierung proteinfrei. Dagegen enthält er nach einer 5-HT-Stimulierung Proteine, die von den C-Zellen sezerniert werden (Just & Walz, 1996). Im ersten Teil meiner Arbeit habe ich mittels Kapillarelektrophoretischer Analyse (CE-Analyse) die Elektrolytkonzentrationen im Endspeichel untersucht sowie die Raten der Flüssigkeitssekretion gemessen. Damit wollte ich klären, welche Transporter an der Sekretion des Primärspeichels und an dessen Modifikation beteiligt sind. Ausserdem wollte ich die Rolle der transportaktiven Epithelzellen der Ausführgänge für die Modifikation des Primärspeichels untersuchen. Dafür habe ich einen Vergleich der Elektrolytkonzentrationen im DA- und 5-HT-stimulierten Endspeichel durchgeführt. Der Elektrolytgehalt des DA- und 5-HT-stimulierten Endspeichels unterscheidet sich nicht signifikant voneinander. Er ist nach beiden Stimulierungen hypoosmotisch zum verwendeten Ringer. Die Ausführgangzellen werden durch DA stimuliert und modifizieren den Primärspeichel durch eine netto-Ionenreabsorption. Meine Versuche zeigen jedoch, dass auch die während einer 5-HT-Stimulierung der Drüse unstimulierten Ausführgangzellen den Primärspeichel modifizieren. In einer nachfolgenden Versuchsreihe habe ich den Einfluss von Ouabain, einem Hemmstoff der Na+-K+-ATPase, und Bumetanid, einem Hemmstoff des NKCC, auf die Raten der Flüssigkeitssekretion sowie den Elektrolytgehalt des Endspeichels untersucht. Ich habe gefunden, dass die Aktivität der Na+-K+-ATPase wichtig für die Modifikation des DA-stimulierten Primärspeichels ist. Im Gegensatz dazu ist sie für die Modifikation des 5-HT-stimulierten Primärspeichels nicht von Bedeutung. Bezüglich der Flüssigkeitssekretion habe ich keinen Einfluss der Na+-K+-ATPase-Aktivität auf die DA-stimulierten Sekretionsraten gefunden, dagegen ist die 5-HT-stimulierte Sekretionsrate in Anwesenheit von Ouabain gesteigert. Die Aktivität des NKCC ist für beide sekretorische Prozesse, die Ionen- und die Flüssigkeitssekretion, wichtig. Eine Hemmung des NKCC bewirkt eine signifikante Verringerung der Raten der Flüssigkeitssekretion nach DA- und 5-HT-Stimulierung sowie in beiden Fällen einen signifikanten Abfall der Ionenkonzentrationen im Endspeichel. Im zweiten Teil meiner Arbeit habe ich versucht, Änderungen der intrazellulären Ionenkonzentrationen in den Acinuszellen während einer DA- oder 5-HT-Stimulierung zu messen. Diese Experimente sollten mit der Methode des "ratiometric imaging" durchgeführt werden. Messungen mit dem Ca2+-sensitiven Fluoreszenzfarbstoff Fura-2 zeigten keinen globalen Anstieg in der intrazellulären Ca2+-Konzentration der P-Zellen. Aufgrund von Problemen mit einer schlechten Beladung der Zellen, einer starken und sich während der Stimulierung ändernden Autofluoreszenz der Zellen sowie Änderungen im Zellvolumen wurden keine Messungen mit Na+- und K+-sensitiven Fluoreszenzfarbstoffen durchgeführt. Im dritten Teil dieser Arbeit habe ich die intrazellulären Signalwege untersucht, die zwischen einer 5-HT-Stimulierung der Drüse und der Proteinsekretion vermitteln. Dazu wurde der Proteingehalt im Endspeichel biochemisch mittels eines modifizierten Bradford Assay gemessen. Eine erstellte Dosis-Wirkungskurve zeigt, dass die Rate der Proteinsekretion von der zur Stimulierung verwendeten 5-HT-Konzentration abhängt. In einer Serie von Experimenten habe ich die intrazellulären Konzentrationen von Ca2+, cAMP und / oder cGMP erhöht und anschließend den Proteingehalt im Endspeichel gemessen. Ein Anstieg der intrazellulären Ca2+-Konzentration aktiviert nur eine geringe Rate der Proteinsekretion. Dagegen kann die Steigerung der intrazellulären cAMP-Konzentration eine stärkere Proteinsekretion aktivieren, die sich nicht signifikant von der nach 5-HT-Stimulierung unterscheidet. Die cAMP-stimulierte Proteinsekretion kann durch gleichzeitige Erhöhung der intrazellulären Ca2+-Konzentration weiter gesteigert werden. Dagegen aktivierte eine Erhöhung der intrazellulären cGMP-Konzentration die Proteinsekretion nicht. Aufgrund dieser Ergebnisse postuliere ich die Existenz eines die Adenylatcyclase aktivierenden 5-HT-Rezeptors in der Basolateralmembran der C-Zellen. The aim of this PhD-work was to investigate major mechanisms of excitation-secretion coupling in the salivary gland of the cockroach Periplaneta americana (L.). This salivary gland is innervated by dopaminergic and serotonergic fibres (Baumann et al., 2002). The two transmitters stimulate different processes in the gland: Dopamine (DA) stimulates the p-cells of the acini and the salivary duct cells, whereas 5-HT (serotonin) activates the p- and the c-cells of the acini, but not the salivary duct cells. Final saliva is completely protein-free after dopamine stimulation. It contains proteins, which are secreted by the c-cells of the acini, after a 5-HT-stimulation (Just & Walz, 1996). In the first part of my work I measured the electrolytic composition of the final saliva by capillary electrophoretic analysis and measured the rates of fluid secretion, in order to answer the following questions: 1.) Which transporters affect the production of primary saliva and its modification? 2.) What is the function of the transport-active salivary duct cells for the modification of the primary saliva? Electrolytic composition of the DA- and 5-HT-stimulated final saliva is not significantly different from each other, and is hypoosmotic to the Ringer used. Salivary duct cells are stimulated by DA and modify the primary saliva by a netto ion-reabsorption. My experiments also show that the duct cells, which are unstimulated during a 5-HT-stimulation of the gland, modify the primary saliva. In the next series of experiments I investigated the effects of ouabain, an inhibitor of the Na+-K+-ATPase, and bumetanide, an inhibitor of the NKCC on the rates of fluid secretion and the electrolytic composition of the final saliva. I found, that the activity of the Na+-K+-ATPase is important for the modification of DA-stimulated primary saliva during its flow through the stimulated duct system. In contrast, it is not important for modification of the 5-HT-stimulated primary saliva. Inhibition of the Na+-K+-ATPase does not affect rates of DA-stimulated fluid secretion, but it increases the rates of 5-HT-stimulated fluid secretion. Activity of the NKCC is important for both secretory processes: the ion and the fluid secretion. Inhibition of the NKCC results in a significant drop in the rates of fluid secretion after DA- and 5-HT-stimulation, as well as a drop in electrolytic concentrations in the saliva. In the second part of my work, I tried to measure changes in the intracellular ionic concentrations (Ca2+, Na+, and K+) within the acinar cells during a DA- or 5-HT-stimulation. The experiments should be performed by ratiometric imaging. Measurements with the Ca2+-sensitive dye Fura-2 did not show any global increase in the intracellular Ca2+-concentration in the p-cells of the acini. Problems concerning a bad loading of the cells, a strong autofluorescence which changed during the time course of the stimulation, as well as changes in the cell volume were the reason, that no measurements using Na+- or K+-sensitive dyes were performed. In the third part of my work I investigated the intracellular signalling pathways, which activate protein secretion after 5-HT-stimulation of the gland. A modified Bradford Assay was used for measuring the protein content in the final saliva. In a dose-response curve I showed that rates of protein secretion are dependent on the 5-HT-concentrations used to stimulate the glands. In another set of experiments I increased the intracellular concentrations of Ca2+, cAMP and / or cGMP, and measured the protein content in the final saliva. An increase in the intracellular Ca2+-concentration activates only a low rate of protein secretion. After an increase in the intracellular cAMP-concentration a much higher rate of protein secretion can be activated, which is not significantly different from the 5-HT stimulated rate of protein secretion. The cAMP-stimulated protein secretion can be further increased by a simultaneous rise in the intracellular Ca2+-concentration. In contrast, cGMP does not activate protein secretion. Therefore I propose the expression of an adenylyl cyclase activating 5-HT-receptor in the basolateral membrane of the protein secreting c-cells.

  20. Planar millimeter wave radar frontend for automotive applications

    NASA Astrophysics Data System (ADS)

    Grubert, J.; Heyen, J.; Metz, C.; Stange, L. C.; Jacob, A. F.

    2003-05-01

    A fully integrated planar sensor for 77 GHz automotive applications is presented. The frontend consists of a transceiver multichip module and an electronically steerable microstrip patch array. The antenna feed network is based on a modified Rotman-lens and connected to the array in a multilayer approach offering higher integration. Furthermore, the frontend comprises a phase lock loop to allow proper frequency-modulated continuous wave (FMCW) radar operation. The latest experimental results verify the functionality of this advanced frontend design featuring automatic cruise control, precrash sensing and cut-in detection. These promising radar measurements give reason to a detailed theoretical investigation of system performance. Employing commercially available MMIC various circuit topologies are compared based on signal-tonoise considerations. Different scenarios for both sequential and parallel lobing hint to more advanced sensor designs and better performance. These improvements strongly depend on the availability of suitable MMIC and reliable packaging technologies. Within our present approach possible future MMIC developments are already considered and, thus, can be easily adapted by the flexible frontend design. Es wird ein integrierter planarer Sensor für 77 GHz Radaranwendungen vorgestellt. Das Frontend besteht aus einem Sende- und Empfangs-Multi-Chip-Modul und einer elektronisch schwenkbaren Antenne. Das Speisenetzwerk der Antenne basiert auf einer modifizierten Rotman- Linse. Für eine kompakte Bauweise sind Antenne und Speisenetzwerk mehrlagig integriert. Weiterhin umfasst das Frontend eine Phasenregelschleife für eine präzise Steuerung des frequenzmodulierten Dauerstrichradars. Die aktuellen Messergebnisse bestätigen die Funktionalit¨at dieses neuartigen Frontend-Designs, das automatische Geschwindigkeitsregelung, Kollisionswarnung sowie Nahbereichsüberwachung ermöglicht. Die Qualität der Messergebnisse hat weiterführende theoretische Untersuchungen über die potenzielle Systemleistungsfähigkeit motiviert. Unter Berücksichtigung von kommerziell erhältlichenMMICs werden verschiedene Schaltungstopologien auf der Grundlage des Signal-Rausch-Verhältnisses verglichen. Sowohl für sequenzielle als auch für parallele Ansteuerung der Antennenkeulen wird eine deutliche Leistungssteigerung ermittelt. Diese Verbesserungen hängen maßgeblich von der Verfügbarkeit geeigneter MMICs und einer zuverlässigen Aufbau- und Verbindungstechnik ab. Das vorliegende Frontend-Konzept kann auf Grund seiner Flexibilität leicht an derlei zukünftige Entwicklungen angepasst werden.

  1. IL-23 secreted by bronchial epithelial cells contributes to allergic sensitization in asthma model: role of IL-23 secreted by bronchial epithelial cells.

    PubMed

    Lee, Hyun Seung; Park, Da-Eun; Lee, Ji-Won; Chang, Yuna; Kim, Hye Young; Song, Woo-Jung; Kang, Hye-Ryun; Park, Heung-Woo; Chang, Yoon-Seok; Cho, Sang-Heon

    2017-01-01

    IL-23 has been postulated to be a critical mediator contributing to various inflammatory diseases. Dermatophagoides pteronyssinus (Der p) is one of the most common inhalant allergens. However, the role of IL-23 in Der p-induced mouse asthma model is not well understood, particularly with regard to the development of allergic sensitization in the airways. The objective of this study was to evaluate roles of IL-23 in Der p sensitization and asthma development. BALB/c mice were repeatedly administered Der p intranasally to develop Der p allergic sensitization and asthma. After Der p local administration, changes in IL-23 expression were examined in lung tissues and primary epithelial cells. Anti-IL-23p19 antibody was given during the Der p sensitization period, and its effects were examined. Effects of anti-IL-23p19 antibody at bronchial epithelial levels were also examined in vitro. The expression of IL-23 at bronchial epithelial layers was increased after Der p local administration in mouse. In Der p-induced mouse models, anti-IL-23p19 antibody treatment during allergen sensitization significantly diminished Der p allergic sensitization and several features of allergic asthma including the production of Th2 cytokines and the population of type 2 innate lymphoid cells in lungs. The activation of dendritic cells in lung-draining lymph nodes was also reduced by anti-IL-23 treatment. In murine lung alveolar type II-like epithelial cell line (MLE-12) cells, IL-23 blockade prevented cytokine responses to Der p stimulation, such as IL-1α, granulocyte-macrophage colony-stimulating factor (GM-CSF), IL-33, and also bone marrow-derived dendritic cell activation. In conclusion, IL-23 is another important bronchial epithelial cell-driven cytokine which may contribute to the development of house dust mite allergic sensitization and asthma. Copyright © 2017 the American Physiological Society.

  2. Control and Communication for a Secure and Reconfigurable Power Distribution System

    NASA Astrophysics Data System (ADS)

    Giacomoni, Anthony Michael

    A major transformation is taking place throughout the electric power industry to overlay existing electric infrastructure with advanced sensing, communications, and control system technologies. This transformation to a smart grid promises to enhance system efficiency, increase system reliability, support the electrification of transportation, and provide customers with greater control over their electricity consumption. Upgrading control and communication systems for the end-to-end electric power grid, however, will present many new security challenges that must be dealt with before extensive deployment and implementation of these technologies can begin. In this dissertation, a comprehensive systems approach is taken to minimize and prevent cyber-physical disturbances to electric power distribution systems using sensing, communications, and control system technologies. To accomplish this task, an intelligent distributed secure control (IDSC) architecture is presented and validated in silico for distribution systems to provide greater adaptive protection, with the ability to proactively reconfigure, and rapidly respond to disturbances. Detailed descriptions of functionalities at each layer of the architecture as well as the whole system are provided. To compare the performance of the IDSC architecture with that of other control architectures, an original simulation methodology is developed. The simulation model integrates aspects of cyber-physical security, dynamic price and demand response, sensing, communications, intermittent distributed energy resources (DERs), and dynamic optimization and reconfiguration. Applying this comprehensive systems approach, performance results for the IEEE 123 node test feeder are simulated and analyzed. The results show the trade-offs between system reliability, operational constraints, and costs for several control architectures and optimization algorithms. Additional simulation results are also provided. In particular, the advantages of an IDSC architecture are highlighted when an intermittent DER is present on the system.

  3. Practical alignment method for X-ray spectral measurement in micro-CT system based on 3D printing technology.

    PubMed

    Ren, Liqiang; Wu, Di; Li, Yuhua; Zheng, Bin; Chen, Yong; Yang, Kai; Liu, Hong

    2016-06-01

    This study presents a practical alignment method for X-ray spectral measurement in a rotating gantry based micro-computed tomography (micro-CT) system using three-dimensional (3D) printing technology. In order to facilitate the spectrometer placement inside the gantry, supporting structures including a cover and a stand were dedicatedly designed and printed using a 3D printer. According to the relative position between the spectrometer and the stand, the upright projection of the spectrometer collimator onto the stand was determined and then marked by a tungsten pinhole. Thus, a visible alignment indicator of the X-ray central beam and the spectrometer collimator represented by the pinhole was established in the micro-CT live mode. Then, a rough alignment could be achieved through repeatedly adjusting and imaging the stand until the pinhole was located at the center of the acquired projection image. With the spectrometer being positioned back onto the stand, the precise alignment was completed by slightly translating the spectrometer-stand assembly around the rough location, until finding a "sweet spot" with the highest photon rate and proper distribution of the X-ray photons in the resultant spectrum. The spectra were acquired under precise alignment and misalignment of approximately 0.2, 0.5, and 1.0mm away from the precise alignment position, and then were compared in qualitative and quantitative analyses. Qualitative analysis results show that, with slight misalignment, the photon rate is reduced from 1302 to 1098, 1031, and 416 photons/second (p/s), respectively, and the characteristic peaks in the acquired spectra are gradually deteriorated. Quantitative analysis indicates that the energy resolutions for characteristic peak of K α1 were calculated as 1.56% for precise alignment, while were 1.84% and 2.40% for slight misalignment of 0.2mm and 0.5mm. The mean energies were reduced from 43.93keV under precise alignment condition to 40.97, 39.63 and 37.78keV when misaligned. Accurate spectral measurements in micro-CT systems are significantly influenced by the alignment precision. This practical alignment method using 3D printing technology could be readily applied to other rotating gantry based micro-CT systems with modified design of the supporting structures and careful considerations of the spectrometer and gantry dimensions.

  4. Practical alignment method for X-ray spectral measurement in micro-CT system based on 3D printing technology

    PubMed Central

    Ren, Liqiang; Wu, Di; Li, Yuhua; Zheng, Bin; Chen, Yong; Yang, Kai; Liu, Hong

    2016-01-01

    This study presents a practical alignment method for X-ray spectral measurement in a rotating gantry based micro-computed tomography (micro-CT) system using three-dimensional (3D) printing technology. In order to facilitate the spectrometer placement inside the gantry, supporting structures including a cover and a stand were dedicatedly designed and printed using a 3D printer. According to the relative position between the spectrometer and the stand, the upright projection of the spectrometer collimator onto the stand was determined and then marked by a tungsten pinhole. Thus, a visible alignment indicator of the X-ray central beam and the spectrometer collimator represented by the pinhole was established in the micro-CT live mode. Then, a rough alignment could be achieved through repeatedly adjusting and imaging the stand until the pinhole was located at the center of the acquired projection image. With the spectrometer being positioned back onto the stand, the precise alignment was completed by slightly translating the spectrometer-stand assembly around the rough location, until finding a “sweet spot” with the highest photon rate and proper distribution of the X-ray photons in the resultant spectrum. The spectra were acquired under precise alignment and misalignment of approximately 0.2, 0.5, and 1.0mm away from the precise alignment position, and then were compared in qualitative and quantitative analyses. Qualitative analysis results show that, with slight misalignment, the photon rate is reduced from 1302 to 1098, 1031, and 416 photons/second (p/s), respectively, and the characteristic peaks in the acquired spectra are gradually deteriorated. Quantitative analysis indicates that the energy resolutions for characteristic peak of Kα1 were calculated as 1.56% for precise alignment, while were 1.84% and 2.40% for slight misalignment of 0.2mm and 0.5mm. The mean energies were reduced from 43.93keV under precise alignment condition to 40.97, 39.63 and 37.78keV when misaligned. Accurate spectral measurements in micro-CT systems are significantly influenced by the alignment precision. This practical alignment method using 3D printing technology could be readily applied to other rotating gantry based micro-CT systems with modified design of the supporting structures and careful considerations of the spectrometer and gantry dimensions. PMID:27777787

  5. Smartes System für die Energiewende - der Übertragungsnetzbetreiber in der digitalen Zukunft

    NASA Astrophysics Data System (ADS)

    Pflaum, Rainer; Egeler, Tobias

    Die Übertragungsnetze stellen eine zuverlässige Versorgung von Haushalt, Gewerbe und Industrie mit elektrischer Energie sicher und sind damit Grundlage einer modernen Wirtschaft und Gesellschaft. Die mittlerweile unumkehrbaren Entwicklungen der nationalen und europäischen Energiewende stellen den Übertragungsnetzbetreiber in seinen Kernaufgaben, dem Bau und Betrieb von Netzen, dem Markt- und Netzzugang und der Integration der erneuerbaren Energien vor neue und große Herausforderungen. Verbrauchsnahe dezentrale Erzeugung wie verbrauchsferne zentrale Erzeugung muss im Sinne der Gewährleistung der Systemstabilität gemanagt und in Einklang mit dem Verbrauch gebracht werden. Erneuerbare Energien müssen zudem in einem solchen System ihren Beitrag zur System- und Marktintegration leisten. All das erfordert mehr Daten, um in einem Gesamtsystem dynamische Reaktionsmöglichkeiten gewährleisten zu können. Erst die "Digitalisierung" schafft dabei die notwendigen Voraussetzungen die Komplexität zu stemmen. Die Digitalisierung stellt daher ein Kernelement dieses Wandels des Übertragungsnetzbetreibers dar, die einerseits mit zum Entstehen der neuen Herausforderungen beiträgt, andererseits aber auch hilft Werkzeuge bereitzustellen, diesen Herausforderungen zu begegnen. Im folgenden Beitrag wird aufgezeigt, wie die Digitalisierung die Aufgaben und Instrumente des Übertragungsnetzbetreibers verändern. Ausgehend von den heutigen Aufgaben eines Übertragungsnetzbetreibers und dem gültigen Rechtsrahmen werden unter dem Begriff "Notwendiges Set für morgen" smarte Elemente und Werkzeuge beschrieben, die bereits heute im Einsatz sind oder in den nächsten Jahren notwendig werden. Im Anschluss erfolgt anhand einiger Beispiele aus unterschiedlichen Bereichen eine Konkretisierung der Einsatzzwecke der Digitalisierung beim Übertragungsnetzbetreiber. Ein kurzer Ausblick mit Fokus auf den weiteren Veränderungsprozess rundet den Beitrag ab.

  6. Characterization of an immunomodulatory Der p 2-FIP-fve fusion protein produced in transformed rice suspension cell culture.

    PubMed

    Su, Chin-Fen; Kuo, I-Chun; Chen, Peng-Wen; Huang, Chiung-Hui; Seow, See Voon; Chua, Kaw Yan; Yu, Su-May

    2012-02-01

    Der p 2, a major allergen of Dermatophagoides pteronyssinus mites, is one of the most clinically relevant allergens to allergic patients worldwide. FIP-fve protein (Fve) from the golden needle mushroom (Flammulina velutipes) is an immunomodulatory protein with potential Th1-skewed adjuvant properties. Here, we produced and immunologically evaluated a Der p 2-Fve fusion protein as a potential immunotherapeutic for allergic diseases. Using an inducible expression system in cultured rice suspension cells, the recombinant Der p 2-Fve fusion protein (designated as OsDp2Fve) was expressed in rice cells under the control of an α-amylase gene (αAmy8) promoter and secreted under sucrose starvation. OsDp2Fve was partially purified from the cultured medium. The conformation of Der p 2 in OsDp2Fve remains intact as reflected by its unaltered allergenicity, as assessed by human IgE ELISA and histamine release assays, compared to non-fusion Der p 2 protein. Furthermore, the Fve protein expressed in OsDp2Fve retains its in vitro lymphoproliferative activity but loses its hemagglutination and lymphoagglutination effects compared to the native protein. Notably, in vivo evaluation showed that mice administered with OsDp2Fve possessed an enhanced production of Der p 2-specific IgG antibodies without potentiating the production of Der p 2-specific IgE and Th2 effector cytokines in comparison with mice co-administered with native Fve and Der p 2 proteins. These results suggest that the recombinant Der p 2-Fve fusion protein produced in rice suspension cell cultures has a great potential for allergy immunotherapy.

  7. Precariat, Education and Technologies: Towards a Global Class Identity

    ERIC Educational Resources Information Center

    Standing, Guy; Jandric, Petar

    2015-01-01

    In this interview Guy Standing outlines the main links between the precariat and the universal basic income. He briefly comments on the relationships of his work to traditional Marxism, and expands his critique of the precariat towards information and communication technologies. He identifies common features of the global precariat, and links them…

  8. New Technology: Servant or Master of Social Science Education?

    ERIC Educational Resources Information Center

    Homan, Roger

    The introduction of computer technology into social science education in elementary and secondary schools in England stands to inhibit some of the positive developments in these subjects in recent years. Currently, objectives of social science education for the multicultural society in Britain are the enhancement of respect for self and of respect…

  9. Training for High Technology at Macomb Community College.

    ERIC Educational Resources Information Center

    Lynch, Edward J.

    Macomb Community College (MCC) prides itself on its responsiveness to the needs of area industry for skilled tradespeople to engage in the design, tooling, and machining activities that are crucial to the area's long-standing automobile and manufacturing operations and to the needs of new area high technology and service-oriented industries. The…

  10. From Policy to Practice: The Implementation and Negotiation of Technologies in Everyday Child Welfare

    ERIC Educational Resources Information Center

    Peckover, Sue; Hall, Christopher; White, Sue

    2009-01-01

    A central element of the Every Child Matters reforms in England are measures which aim at improving information sharing. Amongst these are the children's database and the Common Assessment Framework, both representing technological solutions to long-standing concerns about information sharing in child welfare. This article reports some findings…

  11. Acoustic measurements on trees and logs: a review and analysis

    Treesearch

    Xiping Wang

    2013-01-01

    Acoustic technologies have been well established as material evaluation tools in the past several decades, and their use has become widely accepted in the forest products industry for online quality control and products grading. Recent research developments on acoustic sensing technology offer further opportunities to evaluate standing trees and logs for general wood...

  12. Lecture Capture: What Can Be Automated?

    ERIC Educational Resources Information Center

    Burdet, Benoit; Bontron, Cedric; Burgi, Pierre-Yves

    2007-01-01

    Online education encompasses a variety of technologies, one of which is lecture capture--a long-standing practice at the University of Geneva. The faculty of arts has recorded most of its lectures on audiotapes since the 1970s, well before the World Wide Web existed. Modernization of the recording technologies, however, which until recently…

  13. Connecting Science and Technology

    ERIC Educational Resources Information Center

    Pleasants, Jacob

    2017-01-01

    Helping students understand the Nature of Science (NOS) is a long-standing goal of science education. One method is to provide students examples of science history in the form of short stories. This article modifies that approach, using historical case studies to address both the history of science and the history of technology, as well as the…

  14. Electronic Reading and Digital Library Technologies: Understanding Learner Expectation and Usage Intent for Mobile Learning

    ERIC Educational Resources Information Center

    Hyman, Jack A.; Moser, Mary T.; Segala, Laura N.

    2014-01-01

    Mobile information technology is changing the education landscape by offering learners the opportunity to engage in asynchronous, ubiquitous instruction. While there is a proliferation of mobile content management systems being developed for the mobile Web and stand-alone mobile applications, few studies have addressed learner expectations and…

  15. Integrating Existing Applications in Hypermedia Learning Material (General Issues & Experiences with OLE Technology).

    ERIC Educational Resources Information Center

    Borst Pauwels, H. W. J.; And Others

    The integration of existing applications in hypermedia environments is a promising approach towards more flexible and user-friendly hypermedia learning materials. A hypermedia courseware editor, called HyDE (Hypermedia Document Editor) was developed using Microsoft Windows TM OLE technology. OLE (object Linking and Embedding) stands for an…

  16. Implementing a High School Level Geospatial Technologies and Spatial Thinking Course

    ERIC Educational Resources Information Center

    Nielsen, Curtis P.; Oberle, Alex; Sugumaran, Ramanathan

    2011-01-01

    Understanding geospatial technologies (GSTs) and spatial thinking is increasingly vital to contemporary life including common activities and hobbies; learning in science, mathematics, and social science; and employment within fields as diverse as engineering, health, business, and planning. As such, there is a need for a stand-alone K-12…

  17. Cool Tools, Tough Times: Maintaining a Focus on Technology Infusion

    ERIC Educational Resources Information Center

    Britten, Jody S.; Clausen, Jon M.

    2009-01-01

    Nationwide the effects of the current economic situation are trickling down to impact our schools. School transportation options are narrowing, the housing market is impacting property taxes, and efforts in technology are at a stand still (Bobkoff, 2009; Hopkinson, 2009; Mummolo, 2008). Simultaneously there is a need for schools to meet society's…

  18. Technology-Capable Teachers Transitioning to Technology-Challenged Schools

    ERIC Educational Resources Information Center

    Derbel, Faiza

    2017-01-01

    Developing countries lacking capabilities, funds and human resources are compelled to improve the digital literacy rates of their task force through educational initiatives. This is the case of Tunisia where a stand-alone in-service teacher education (Ted) initiative was implemented in 2014 and 2015. The aim of this project, the Tech Age Teacher…

  19. Space Science

    NASA Image and Video Library

    1999-04-20

    NASA's Space Optics Manufacturing Technology Center has been working to expand our view of the universe via sophisticated new telescopes. The Optics Center's goal is to develop low-cost, advanced space optics technologies for the NASA program in the 21st century, including the long-term goal of imaging Earth-like planets in distant solar systems. A segmented array of mirrors was designed by the Space Optics Manufacturing Technology Center for the solar concentrator test stand at the Marshall Space Flight Center (MSFC) for powering solar thermal propulsion engines. Each hexagon mirror has a spherical surface to approximate a parabolic concentrator when combined into the entire 18-foot diameter array. The aluminum mirrors were polished with a diamond turning machine that creates a glass-like reflective finish on metal. The precision fabrication machinery at the Space Optics Manufacturing Technology Center at MSFC can polish specialized optical elements to a world class quality of smoothness. This image shows optics physicist, Vince Huegele, examining one of the 144-segment hexagonal mirrors of the 18-foot diameter array at the MSFC solar concentrator test stand.

  20. Space Science

    NASA Image and Video Library

    1999-04-20

    NASA's Space Optics Manufacturing Technology Center has been working to expand our view of the universe via sophisticated new telescopes. The Optics Center's goal is to develop low-cost, advanced space optics technologies for the NASA program in the 21st century, including the long-term goal of imaging Earth-like planets in distant solar systems. A segmented array of mirrors was designed by the Space Optics Manufacturing Technology Center for solar the concentrator test stand at the Marshall Space Flight Center (MSFC) for powering solar thermal propulsion engines. Each hexagon mirror has a spherical surface to approximate a parabolic concentrator when combined into the entire 18-foot diameter array. The aluminum mirrors were polished with a diamond turning machine, that creates a glass-like reflective finish on metal. The precision fabrication machinery at the Space Optics Manufacturing Technology Center at MSFC can polish specialized optical elements to a world class quality of smoothness. This image shows optics physicist, Vince Huegele, examining one of the 144-segment hexagonal mirrors of the 18-foot diameter array at the MSFC solar concentrator test stand.

  1. Die Digitalisierung der Energiewirtschaft: Potenziale und Herausforderungen der IKT-Branche für Utility 4.0

    NASA Astrophysics Data System (ADS)

    Aichele, Christian; Schönberger, Marius

    Energieunternehmen haben auf dem Weg zur digitalen Transformation noch viele Herausforderungen zu bewältigen. Ein besonderer Schwerpunkt liegt derzeit auf der Modernisierung der IT-Systeme. Ausgangspunkt hierzu ist, dass sich bei den Endkonsumenten Mobile Applikationen, Smartphones, Tablet-PCs oder Smart TVs einer immensen Beliebtheit erfreuen. Durch diese Technologien wird die physische und virtuelle Welt in immer weiter zunehmendem Maße miteinander verknüpft. Mobile Applikation können einen wahren Hype hervorrufen und Verhaltensweisen auch nachhaltig verändern (ein Beispiel hierfür ist Pokémon Go, eine App die ein virtuelles Spiel mit der realen Umgebung kombiniert und die erstmalig auch eingefleischte Zocker aus der Anonymität ihrer häuslichen Umgebung hervorlocken konnte und für analoge Bewegung im Freien sorgte).

  2. Stein-Schere-Papier

    NASA Astrophysics Data System (ADS)

    Springborn, Boris

    Wie gewinnt man im Spiel? Die Analyse von Strategien bei Gesellschaftsspielen ist ein Thema der mathematischen Spieltheorie. Mit ihren Methoden kann man aber nicht nur Spiele wie Schach oder Skat untersuchen, sondern auch verschiedenste Konfliktsituationen, bei denen das Schicksal jedes einzelnen Akteurs nicht nur vom eigenen Verhalten abhängt, sondern auch vom Verhalten der anderen, die ebenso wie er versuchen, ein für sie selbst möglichst positives Ergebnis herauszuschlagen. Die Spieltheorie hat großen Einfluss in den Wirtschaftswissenschaften. Auch in der Psychologie, Soziologie, Biologie und der Militärwissenschaft findet sie Anwendung. In der folgenden Aufgabe geht es aber tatsächlich um ein Spiel, und zwar um ein sehr einfaches, das jeder kennt. Trotzdem ist die Lösung nicht ganz einfach, und wer sie findet, hat schon die eine oder andere grundlegende Idee der Spieltheorie verstanden.

  3. Reinraumtechnik für die Medizintechnik

    NASA Astrophysics Data System (ADS)

    Petek, Max; Jungbluth, Martin; Krampe, Erhard

    Die Reinraumtechnik ist heute ein unverzichtbarer Bestandteil bei der Fertigung von Produkten der Life Sciences, den Bereichen Pharma, Lebensmittel, Kosmetik und Medizintechnik. In Anbetracht der langen Historie der Medizintechnik ist sie jedoch eine sehr junge Disziplin. Die Bedeutung von Keimen und die richtige Einschätzung ihrer Größe wurden zwar sehr früh bereits durch Paracelsus erkannt, jedoch wurden daraus noch keine speziellen oder kontinuierlich umgesetzten Hygienevorschriften abgeleitet. Die erste bekannte technische Umsetzung von Hygieneempfehlungen geht auf den Franzosen François Nicolas Appert zurück, der eine aseptische Abfüllmethode für Lebensmittel entwickelte und diese 1810 veröffentlichte [1]. Die erste dokumentierte medizinische Umsetzung stellten Hygienevorschriften für Ärzte dar, die Ignaz Philipp Semmelweis nach 1847 in der Wiener Klinik für Geburtshilfe einführte [2].

  4. Mikrodaten und statistische Auswertungsmethoden

    NASA Astrophysics Data System (ADS)

    Hujer, Reinhard

    Mit der zunehmenden Verfügbarkeit immer größerer Querschnitts- und Längschnittsdatensätze für Personen, Haushalte und Betriebe sowie deren Verknüpfungen hat sich die mikroökonometrische Forschung in den vergangenen Jahren rasant weiterentwickelt. Dies gilt sowohl aus methodischer als auch aus empirischer, anwendungsorientierter Sicht. Mikrodaten und mikroökonometrische Ansätze dienen dazu, aktuelle, politikrelevante Fragen aufzugreifen, sie zu analysieren und fundierte politische Empfehlungen zu geben, beispielsweise im Rahmen der Arbeitsmarkt- und Sozialpolitik, der Finanzanalyse und der Marketingforschung. Die Deutsche Statistische Gesellschaft (DStatG) und deren Mitglieder haben sich in den Ausschüssen und in Hauptversammlungen kontinuierlich mit den Weiterentwicklungen der mikroökonometrischen Methodik und den empirischen Anwendungen befasst. Zahlreiche Publikationen von Mitgliedern der DStatG haben entscheidend zum kritischen Diskurs und zum wissenschaftlichen Fortschritt in diesem Bereich beigetragen.

  5. Generation of a transgenic rice seed-based edible vaccine against house dust mite allergy.

    PubMed

    Yang, Lijun; Kajiura, Hiroyuki; Suzuki, Kazuya; Hirose, Sakiko; Fujiyama, Kazuhito; Takaiwa, Fumio

    2008-01-11

    As an alternative approach to conventional allergen-specific immunotherapy, transgenic rice seed expressing a major house dust mite (HDM) allergen, Der p 1, was developed as an edible vaccine. The C-terminal KDEL-tagged Der p 1 allergen specifically accumulated in seed endosperm tissue under the control of the endosperm-specific GluB1 promoter. Der p 1 reached a maximum concentration of 58 microg/grain and was deposited in the endoplasmic reticulum (ER)-derived protein body I (PB-I). Plant-derived Der p 1 was posttranslationally modified with high-mannose-type glycan structures. Glycosylated Der p 1 displayed reduced IgE binding capacity in comparison with its unglycosylated counterpart in vitro. Our results indicate that transgenic Der p 1 rice seeds are a safe, potential oral delivery vaccine for the treatment of HDM allergy.

  6. Ustekinumab in der Therapie der Pustulosis palmoplantaris - Eine Fallserie mit neun Patienten.

    PubMed

    Buder, Valeska; Herberger, Katharina; Jacobi, Arnd; Augustin, Matthias; Radtke, Marc Alexander

    2016-11-01

    Die Pustulosis palmoplantaris ist eine chronisch entzündliche Hauterkrankung, die mit bedeutenden Einschränkungen der Lebensqualität und der Belastbarkeit einhergeht. Aufgrund von Zulassungsbeschränkungen und einem häufig therapierefraktären Verlauf sind die Behandlungsmöglichkeiten limitiert. Nach zuvor frustranen Therapien erhielten 9 Patienten mit Pustulosis palmoplantaris nach Ausschluss einer latenten Tuberkulose Ustekinumab (45 mg Ustekinumab bei < 100 kg Körpergewicht [KG], 90 mg Ustekinumab > 100 kg KG) in Woche 0, 4, 12 und 24. Reguläre Visiten erfolgten nach 4 und 12 Wochen, im weiteren Verlauf alle 12 Wochen. Das Durchschnittsalter bei Therapiebeginn betrug 48 Jahre. Drei Patienten waren männlich. Bei n  =  4 Patienten (44,4 %) wurde eine Verbesserung um 75 % des Palmoplantar-Psoriasis-Area-Severity-Index (PPPASI) erreicht. Insgesamt verbesserte sich der PPPASI nach 24 Wochen durchschnittlich um 71,6 %. Eine komplette Abheilung zeigte sich bei n  =  2 Patienten nach 24 Wochen. Bis auf lokale Injektionsreaktionen und leichte Infekte wurden keine unerwünschten Wirkungen beobachtet. Die Fallserie ist ein weiterer Beleg für die Wirksamkeit und Verträglichkeit von Ustekinumab in der Therapie der Pustulosis palmoplantaris. Zur Beurteilung der Langzeitwirkung und -sicherheit sowie der Wirksamkeit einer intermittierenden Therapie sind kontrollierte Studiendaten sowie Beobachtungen im Rahmen von Patientenregistern notwendig. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  7. [Homöopathisch-phytotherapeutische Behandlung des Reizdarmsyndroms mit Magen-Darm-Entoxin N®: Eine Anwendungsbeobachtung].

    PubMed

    Märtens, Diane; Range, Natasha; Günnewich, Nils; Gruber, Nicola; Schmidt, Stefan

    Hintergrund: In dieser Anwendungsbeobachtung wird zum ersten Mal die Behandlung des Reizdarmsyndroms (RDS) mit einem homöopathisch-phytotherapeutischen Komplexpräparat beschrieben. Methodik: Ziel der 6-wöchigen Therapie mit dem Magen-Darm-Entoxin N® war die Reduzierung der RDS-Symptomatik sowie die Verbesserung der Lebensqualität. Zielkriterien waren die Veränderungen in der Irritable Bowel Syndrome - Severity Scoring System (IBS-SSS) und der Irritable Bowel Syndrome - Quality-of-Life Scale (IBS-QoL). Die Patient/innen (N = 41; Alter 44,0 ± 15,74 Jahre) wurden zu gleichen Teilen in einer Hausarztpraxis (N = 20) und einer Heilpraktikerpraxis (N = 21) rekrutiert. Ergebnisse: Der IBS-QoL-Score verringerte sich signifikant (prä: 35,9 ± 16,3; post: 20,1 ± 13,4; t = 8,504; p < 0,001). Die Effektstärke betrug 1,34 (Cohens d). Der IBS-SSS-Score verringerte sich ebenfalls signifikant (prä: 239,4 ± 83,4; post: 123,7 ± 80,9; t = 7,825; p < 0,001) mit einer Effektstärke von d = 1,24. Die Neben- und Wechselwirkungen waren minimal und signifikante Unterschiede zwischen beiden Praxen wurden nicht gefunden. Schlussfolgerungen: Magen-Darm-Entoxin N® ist eine sichere und sinnvolle Therapieoption bei der Behandlung des RDS. Allerdings sollten randomisierte kontrollierte Studien folgen, um die Spezifizität der Ergebnisse dieser Anwendungsbeobachtung zu stützen. © 2017 S. Karger GmbH, Freiburg.

  8. Selective Perception for Robot Driving

    DTIC Science & Technology

    1992-05-01

    models are theories of human cognitive activity during driving. Van der Molen and Botticher recently reviewed several of these models [ van der Molen 871...how to represent driving knowledge, how to perceive traffic situations, or how to process information to obtain actions. Van der Molen and Botticher...attempted to compare the operations of various models objectively on the same task [Rothengatter 88, van der Molen 87], but the models could be

  9. Reale Gase, tiefe Temperaturen

    NASA Astrophysics Data System (ADS)

    Heintze, Joachim

    Wir werden uns in diesem Kapitel zunächst mit der van der Waals'schen Zustandsgleichung befassen. In dieser Gleichung wird versucht, die Abweichungen, die reale Gase vom Verhalten idealer Gase zeigen, durch physikalisch motivierte Korrekturterme zu berücksichtigen. Es zeigt sich, dass die van derWaals-Gleichung geeignet ist, nicht nur die Gasphase, sondern auch die Phänomene bei der Verflüssigung von Gasen und den kritischen Punkt zu beschreiben.

  10. Application of Diffusion Monte Carlo to Materials Dominated by van der Waals Interactions

    DOE PAGES

    Benali, Anouar; Shulenburger, Luke; Romero, Nichols A.; ...

    2014-06-12

    Van der Waals forces are notoriously difficult to account for from first principles. We perform extensive calculation to assess the usefulness and validity of diffusion quantum Monte Carlo when applied to van der Waals forces. We present results for noble gas solids and clusters - archetypical van der Waals dominated assemblies, as well as a relevant pi-pi stacking supramolecular complex: DNA + intercalating anti-cancer drug Ellipticine.

  11. Chirurgie angeborener Herzfehler

    NASA Astrophysics Data System (ADS)

    Schreiber, Christian; Libera, Paul; Lange, Rüdiger

    Störungen der embryonalen Entwicklung in der frühen Phase der Schwangerschaft können zu Fehlbildungen am Herz- und Gefäßsystem führen. Die Häufigkeit liegt bei 0.8-1 % aller lebend geborenen Kinder. In Deutschland werden jedes Jahr etwa 6.000 Kinder mit einem Herzfehler geboren (Quelle: http://www.kompetenznetzahf.de). Das Spektrum reicht von einfachen Fehlern, die das Herz-Kreislauf-System wenig beeinträchtigen, bis zu sehr schweren Herzerkrankungen, die unbehandelt zum Tode führen. Fortschritte der Kinderkardiologie, Herzchirurgie und Anästhesie ermöglichen heute ein Überleben bei über 90 % der Patienten. Auch die spezialisierte Pränataldiagnostik (vorgeburtliche Diagnostik) ermöglicht schon die frühe Weichenstellung für mögliche Therapieoptionen. Bei der chirurgischen Therapie ist jedoch festzuhalten, dass ein Herzfehler entweder korrigierend behandelt wird oder nur "palliiert“ werden kann. Bei letzterer Therapie wird bei einem Patienten eine medizinische Maßnahme durchgeführt, die nicht die Herstellung normaler Körperfunktionen zum Ziel hat, sondern in Anpassung an die physiologischen Besonderheiten des Patienten dessen Zustand lediglich stabilisiert und optimiert. Dies kann beispielsweise bei einer nicht korrigierbaren angeborenen Fehlbildung notwendig sein, bei der lediglich eine funktionelle Herzkammer vorhanden ist (z. B. hypoplastisches Linksherz). Hierbei muss eine prothetische Verbindung zur Lungenstrombahn in der Folgezeit entfernt werden.

  12. Frühe Stresserfahrungen und Krankheitsvulnerabilität

    PubMed Central

    Entringer, Sonja; Buss, Claudia; Heim, Christine

    2016-01-01

    Zusammenfassung Hintergrund Das stetig wachsende Forschungsgebiet der “Frühe[n] Programmierung von Krankheit und Gesundheit” untersucht, inwieweit die individuelle Vulnerabilität für die Entstehung verschiedenster Erkrankungen über die Lebensspanne bereits während der frühen Entwicklung beeinflusst wird. Ziele der Arbeit In der vorliegenden Übersichtsarbeit werden das Konzept der frühen Programmierung von Krankheitsvulnerabilität erläutert sowie Befunde zu den Folgen frühkindlicher Traumatisierung und pränataler Stressexposition zusammenfassend dargestellt. Es werden außerdem biologische Mechanismen diskutiert, die das erhöhte Krankheitsrisiko nach lebensgeschichtlich früher Stresserfahrungen vermitteln. Die Möglichkeit der transgenerationalen Transmission frühkindlicher Erfahrungen an die nächste Generation und die zugrundeliegenden Mechanismen dieser Übertragung werden ebenfalls vorgestellt. Fazit Die Befundlage zu Stresserfahrungen im frühen Leben und der Entstehung von psychischen und körperlichen Störungen über die Lebensspanne wächst stetig. Die Mechanismen werden derzeit weiter bis hin zur molekularbiologischen und epigenetischen Ebene erforscht. Hier ergeben sich ganz neue Perspektiven, welche die Präzision klinischer Diagnostik und den Erfolg von Interventionen erheblich verbessern könnten. Momentan existiert jedoch noch ein erheblicher Mangel an Translation zwischen diesen Forschungserkenntnissen und deren Anwendung in der klinischen Versorgung. PMID:27604117

  13. Werner-Syndrom. Eine prototypische Form der segmentalen Progerie

    PubMed Central

    Lessel, D.; Oshima, J.; Kubisch, C.

    2013-01-01

    Das Werner-Syndrom ist eine segmental progeroide Erkrankung mit Beginn in der Adoleszenz oder im frühen Erwachsenenalter. Typische Symptome, die zum vorgealterten Phänotyp beitragen, sind ein post-pubertär auftretender Kleinwuchs, Katarakte, eine vorzeitige Ergrauung/Ausdünnung des Haupthaars, sklerodermieähnliche Hautveränderungen und eine regionale Atrophie des subkutanen Fettgewebes. Darüber hinaus kommt es früh und gehäuft zu „Alterserkrankungen“ wie z. B. einem Diabetes mellitus Typ 2, einer Osteoporose, einer Atherosklerose sowie verschiedenen malignen Tumoren. Das Werner-Syndrom wird autosomal- rezessiv vererbt und ist durch Mutationen im Werner-Gen (WRN) bedingt. Es wurden bis heute mehr als 70 über das gesamte Gen verteilte Mutationen identifiziert, die typischerweise zu einem Verlust der Genfunktion führen. WRN kodiert für eine RecQ-Typ- Helikase, die u. a. an der DNA-Reparatur und der Aufrechterhaltung der DNA-Integrität beteiligt ist, was sich in einer erhöhten genetischen Instabilität in Patientenzellen wider-spiegelt. Trotz der relativen Seltenheit ist die Analyse des Werner-Syndroms von allgemeiner Bedeutung, um die Rolle der DNA-Stabilität und Integrität für das Altern sowie die Entwicklung altersassoziierter Erkrankungen besser zu verstehen. PMID:25309043

  14. Astronomie für Alle. Einführung in die Himmelsbeobachtung

    NASA Astrophysics Data System (ADS)

    Neckel, Thorsten; Neumann, Martin; Staude, Jakob

    2002-12-01

    Contents: Abenteuer Astronomie - Aufbruch zu fremden Welten. Orientierung am Himmel. Das Teleskop - Dein Blick ins All. Der Erdmond. Wir beobachten unseren Mond. Planeten - Unsere Nachbarn im All. Himmelsleuchten in dunkler Nacht - Das Zodiakallicht. Vagabunden im Sonnensystem. Meteore und Feuerkugeln. Meteorite - Faszinierende Materie aus dem Weltall. Kometen - Eisige Zeugen der Urzeit. Der hellste Stern an unserem Himmel. Auf der Sonne ist 'was los! Kosmische Schattenspiele - Sonnen- und Mondfinsternisse. Ferne Sonnen. Die Tiefen des Kosmos - Sternhaufen, Gasnebel und Galaxien. Astrophotographie mit stehender Kamera. Astrophotographie mit nachgeführter Kamera. Der Kosmos im Computer - Software für Hobbyastronomen. Signale aus dem Kosmos - Radioastronomie für Einsteiger.

  15. [Leben im Eismeer - Tauchuntersuchungen zur Biologie arktischer Meerespflanzen und Meerestiere

    PubMed

    Lippert; Karsten; Wiencke

    2000-01-01

    Die Maske wird nochmals auf Dichtigkeit überprüft, der Knoten der Sicherungsleine mit zwei halben Schlägen fixiert, dann rutscht die Taucherin von der Eiskante in das kalte Wasser. Eine halbe Stunde vergeht, bevor ihr Kopf wieder aus dem Eisloch auftaucht und sie ein großes Sammelnetz nach oben reicht, gefüllt mit verschiedenen Arten von Makroalgen. Obwohl noch große Flächen des Kongsfjordes im arktischen Spitzbergen zugefroren sind und das Festland von einer dicken Schneedecke bedeckt ist, hat unter Wasser in den Algenwäldern bereits der Sommer und damit die Saison der Meeresbiologen begonnen.

  16. Segmentierung von Aortenaneurysmen in CTA-Bildern mit dem statistischen Verfahren der Active Appearance Models

    NASA Astrophysics Data System (ADS)

    Greiner, Katharina; Egger, Jan; Großkopf, Stefan; Kaftan, Jens N.; Dörner, Ralf; Freisleben, Bernd

    In diesem Beitrag werden Active Appearance Models (AAMs) zur Segmentierung der äußeren Kontur von Aortenaneurysmen eingesetzt. Diese Aufgabe ist wegen des geringen Kontrastes zum umliegenden Gewebe und des Aufbaus der teils thrombotisierten oder kalzifizierten Gefäßwände im Bereich eines Aneurysmas so komplex, dass sie aufgrund der Vielgestalt der Kontur in CT-Angiographie-Bildern die Verwendung eines statistischen Modells für Form und eingeschlossene Textur rechtfertigt. Für die Evaluation des Verfahrens wurden verschiedene statistische Modelle aus Schichten von neun CTA-Datensätzen trainiert und die Segmentierung anhand von Leave-One-Out-Tests überprüft.

  17. Around Marshall

    NASA Image and Video Library

    2002-10-01

    This is a ground level view of Test Stand 300 at the east test area of the Marshall Space Flight Center. Test Stand 300 was constructed in 1964 as a gas generator and heat exchanger test facility to support the Saturn/Apollo Program. Deep-space simulation was provided by a 1960 modification that added a 20-ft thermal vacuum chamber and a 1981 modification that added a 12-ft vacuum chamber. The facility was again modified in 1989 when 3-ft and 15-ft diameter chambers were added to support Space Station and technology programs. This multiposition test stand is used to test a wide range of rocket engine components, systems, and subsystems. It has the capability to simulate launch thermal and pressure profiles. Test Stand 300 was designed for testing solid rocket booster (SRB) insulation panels and components, super-insulated tanks, external tank (ET) insulation panels and components, Space Shuttle components, solid rocket motor materials, and advanced solid rocket motor materials.

  18. Saturn Apollo Program

    NASA Image and Video Library

    1967-01-01

    This photograph is a view of the Saturn V S-IC-5 (first) flight stage being hoisted into the S-IC-B1 test stand at the Mississippi Test Facility (MTF), Bay St. Louis, Mississippi. Begirning operations in 1966, the MTF has two test stands, a dual-position structure for running the S-IC stage at full throttle, and two separate stands for the S-II (Saturn V third) stage. It became the focus of the static test firing program. The completed S-IC stage was shipped from Michoud Assembly Facility (MAF) to the MTF. The stage was then installed into the 124-meter-high test stand for static firing tests before shipment to the Kennedy Space Center for final assembly of the Saturn V vehicle. The MTF was renamed to the National Space Technology Laboratory (NSTL) in 1974 and later to the Stennis Space Center (SSC) in May 1988.

  19. Saturn Apollo Program

    NASA Image and Video Library

    1967-08-01

    This photograph is a view of the Saturn V S-IC-5 (first) flight stage static test firing at the S-IC-B1 test stand at the Mississippi Test Facility (MTF), Bay St. Louis, Mississippi. Begirning operations in 1966, the MTF has two test stands, a dual-position structure for running the S-IC stage at full throttle, and two separate stands for the S-II (Saturn V third) stage. It became the focus of the static test firing program. The completed S-IC stage was shipped from Michoud Assembly Facility (MAF) to the MTF. The stage was then installed into the 407-foot-high test stand for the static firing tests before shipment to the Kennedy Space Center for final assembly of the Saturn V vehicle. The MTF was renamed to the National Space Technology Laboratory (NSTL) in 1974 and later to the Stennis Space Center (SSC) in May 1988.

  20. Southeast Regional Experiment Station

    NASA Astrophysics Data System (ADS)

    1994-08-01

    This is the final report of the Southeast Regional Experiment Station project. The Florida Solar Energy Center (FSEC), a research institute of the University of Central Florida (UCF), has operated the Southeast Regional Experiment Station (SE RES) for the US Department of Energy (DOE) since September 1982. Sandia National Laboratories, Albuquerque (SNLA) provides technical program direction for both the SE RES and the Southwest Regional Experiment Station (SW RES) located at the Southwest Technology Development Institute at Las Cruces, New Mexico. This cooperative effort serves a critical role in the national photovoltaic program by conducting system evaluations, design assistance and technology transfer to enhance the cost-effective utilization and development of photovoltaic technology. Initially, the research focus of the SE RES program centered on utility-connected PV systems and associated issues. In 1987, the SE RES began evaluating amorphous silicon (a-Si) thin-film PV modules for application in utility-interactive systems. Stand-alone PV systems began receiving increased emphasis at the SE RES in 1986. Research projects were initiated that involved evaluation of vaccine refrigeration, water pumping and other stand-alone power systems. The results of this work have led to design optimization techniques and procedures for the sizing and modeling of PV water pumping systems. Later recent research at the SE RES included test and evaluation of batteries and charge controllers for stand-alone PV system applications. The SE RES project provided the foundation on which FSEC achieved national recognition for its expertise in PV systems research and related technology transfer programs. These synergistic products of the SE RES illustrate the high visibility and contributions the FSEC PV program offers to the DOE.

  1. Blutpräparate und therapeutische Anwendung (Hämotherapie)

    NASA Astrophysics Data System (ADS)

    Burkhart, Jürgen; Leimbach, Rainer; Nagl, Detlev; Weinauer, Franz

    Die Geschichte der Blutübertragung lässt sich bis in das Altertum verfolgen - wenn auch hier das Blut nicht in die Blutgefäße eingebracht, sondern als Trank verabreicht wurde. Im alten Rom stürmten die Zuschauer in die Kampfarena, um das Blut verletzter Gladiatoren zu trinken, in dem Gedanken, deren Stärke würde in sie überfließen. So wurden auch Greise mit dem Blut von Jünglingen behandelt. Der Glaube, mit dem Blut würden Eigenschaften des Spenders übertragen, muss wohl auch bei dem Versuch mitgewirkt haben, Verbrecher durch Übertragung von Schafsblut "lammfromm“ zu machen. Zu Beginn der Mensch-zu-Mensch-Übertragung wurde Blut mittels eines Röhrchens von Blutgefäß zu Blutgefäß transfundiert. Diese im Mittelalter neu erprobte Form basierte auf der Entdeckung des Blutkreislaufes durch William Harvey (1578-1657). Es überwog allerdings noch die Blutübertragung vom Tier auf den Menschen, die nicht selten mit dem Tod beider Beteiligter endete. In der aufklärerischen Phase der französischen Revolution wurde diese Art der Blutübertragung deshalb verboten.

  2. Der Begriff mathematischer Schönheit in einer empirisch informierten Ästhetik der Mathematik

    NASA Astrophysics Data System (ADS)

    Müller-Hill, Eva; Spies, Susanne

    Dieses Zitat des britischen Mathematikers G. H. Hardy bringt pointiert die unter praktizierenden Mathematikern, aber auch unter Philosophen der Mathematik weithin akzeptierte Ansicht zum Ausdruck, dass mathematische Schönheit eine nicht zu vernachlässigende Rolle in der mathematischen Forschungspraxis spielt und sowohl interessante ästhetiktheoretische, epistemische als auch ontologische Aspekte aufweist. Danach beeinflusst also das Verständnis dessen, was mathematische Schönheit ist, auch das Verständnis dessen, was Mathematik ist: "Was sind die Träger mathematischer Schönheit?" ist die Frage nach der Art der Gegenstände, für deren Schönheit Mathematiker sich begeistern und nach der sie streben. "Was sind die Kriterien für mathematische Schönheit?" ist die Frage nach den Kategorien, unter denen Mathematiker ihre Arbeit bewerten. Egal, ob sich das Phänomen mathematischer Schönheit als Ausnahmemerkmal oder als ständiger Begleiter mathematischen Tuns erweist - ein adäquates allgemeines Mathematikverständnis sollte dieses Phänomen berücksichtigen und bestenfalls auch erklären können.

  3. Atmosphärisches Plasma in der Medizintechnik

    NASA Astrophysics Data System (ADS)

    Beer, Thomas; Knospe, Alexander; Buske, Christian

    Bei der Fertigung komplexer Bauteile werden immer häufiger unterschiedlichste Materialien zur Erfüllung der Funktion kombiniert. Kunststoff, Metall, Glas oder Keramik müssen miteinander verbunden werden. Dies gilt für die unterschiedlichsten Industriebereiche; von der Halbleiter-/Elektronikindustrie [1, 2] über die Automobilindustrie [3, 4] bis hin zur Medizintechnik werden für Verklebungs- [5], Bedruckungs-, Lackier- [6] und Anspritzprozesse optimal vorbehandelte Oberflächen benötigt.

  4. Resonance oscillations of nonreciprocal long-range van der Waals forces between atoms in electromagnetic fields

    NASA Astrophysics Data System (ADS)

    Sherkunov, Yury

    2018-03-01

    We study theoretically the van der Waals interaction between two atoms out of equilibrium with an isotropic electromagnetic field. We demonstrate that at large interatomic separations, the van der Waals forces are resonant, spatially oscillating, and nonreciprocal due to resonance absorption and emission of virtual photons. We suggest that the van der Waals forces can be controlled and manipulated by tuning the spectrum of artificially created random light.

  5. Implication of Two-Coupled Differential Van der Pol Duffing Oscillator in Weak Signal Detection

    NASA Astrophysics Data System (ADS)

    Peng, Hang-hang; Xu, Xue-mei; Yang, Bing-chu; Yin, Lin-zi

    2016-04-01

    The principle of the Van der Pol Duffing oscillator for state transition and for determining critical value is described, which has been studied to indicate that the application of the Van der Pol Duffing oscillator in weak signal detection is feasible. On the basis of this principle, an improved two-coupled differential Van der Pol Duffing oscillator is proposed which can identify signals under any frequency and ameliorate signal-to-noise ratio (SNR). The analytical methods of the proposed model and the construction of the proposed oscillator are introduced in detail. Numerical experiments on the properties of the proposed oscillator compared with those of the Van der Pol Duffing oscillator are carried out. Our numerical simulations have confirmed the analytical treatment. The results demonstrate that this novel oscillator has better detection performance than the Van der Pol Duffing oscillator.

  6. Molecular Determinants for Antibody Binding on Group 1 House Dust Mite Allergens

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chruszcz, Maksymilian; Pomés, Anna; Glesner, Jill

    2012-07-11

    House dust mites produce potent allergens, Der p 1 and Der f 1, that cause allergic sensitization and asthma. Der p 1 and Der f 1 are cysteine proteases that elicit IgE responses in 80% of mite-allergic subjects and have proinflammatory properties. Their antigenic structure is unknown. Here, we present crystal structures of natural Der p 1 and Der f 1 in complex with a monoclonal antibody, 4C1, which binds to a unique cross-reactive epitope on both allergens associated with IgE recognition. The 4C1 epitope is formed by almost identical amino acid sequences and contact residues. Mutations of the contactmore » residues abrogate mAb 4C1 binding and reduce IgE antibody binding. These surface-exposed residues are molecular targets that can be exploited for development of recombinant allergen vaccines.« less

  7. Scaling laws for van der Waals interactions in nanostructured materials.

    PubMed

    Gobre, Vivekanand V; Tkatchenko, Alexandre

    2013-01-01

    Van der Waals interactions have a fundamental role in biology, physics and chemistry, in particular in the self-assembly and the ensuing function of nanostructured materials. Here we utilize an efficient microscopic method to demonstrate that van der Waals interactions in nanomaterials act at distances greater than typically assumed, and can be characterized by different scaling laws depending on the dimensionality and size of the system. Specifically, we study the behaviour of van der Waals interactions in single-layer and multilayer graphene, fullerenes of varying size, single-wall carbon nanotubes and graphene nanoribbons. As a function of nanostructure size, the van der Waals coefficients follow unusual trends for all of the considered systems, and deviate significantly from the conventionally employed pairwise-additive picture. We propose that the peculiar van der Waals interactions in nanostructured materials could be exploited to control their self-assembly.

  8. Spritzgießen

    NASA Astrophysics Data System (ADS)

    Bürkle, Erwin; Ammer, Daniel; Würtele, Martin

    Kunststoffe zu spritzgießen ist eine der fortschrittlichsten Verarbeitungstechnologien. Durch Spritzgießen, ein Verfahren der Urformtechnik werden Formteile in der Regel mit komplexer Geometrie vollautomatisch hergestellt. Ausgehend vom Verfahrensablauf werden Thermoplaste, Duroplaste oder Kautschuk in einer Spritzgießmaschine aus dem Feststoffzustand heraus aufgeschmolzen, in einen formgebenden Hohlraum (Werkzeug) eingespritzt, dort verdichtet, abgekühlt oder zur Reaktion gebracht und dann als Formteil aus dem Werkzeug ausgeworfen. Etwa 60 % aller Kunststoffverarbeitungsmaschinen sind Spritzgießmaschinen (Abb. 26.1). Auf ihnen werden Formteile mit sehr niedrigen Massen im mg-Bereich bis hin zu großen Massen in zwei - z. T. sogar auch dreistelligen kg-Bereich hergestellt. Der Prozess des Spritzgießens nutzt in idealer Weise das besondere physikalische Verhalten der Kunststoffe. In einem verhältnismäßig einfachen Prozess werden durch Erwärmen des Kunststoffes und der nachfolgenden Formgebung im Schmelzezustand mit abschließender Abkühlung in einem formgebenden Werkzeug direkt gebrauchsfertige Formteile hergestellt [1, 31].

  9. Kundenfokus: Startpunkt für die digitale Transformation bei Stadtwerken

    NASA Astrophysics Data System (ADS)

    Fett, Perry; Küller, Philipp

    Big Data, Internet der Dinge, Mobile Computing und soziale Medien - die modernen Informationstechnologien durchdringen den Alltag der meisten Menschen und lösen hierdurch eine digitale Transformation aus. Im Unternehmenskontext manifestiert sich die Digitalisierung durch eine neue Qualität der wissensbasierten Entscheidungsunterstützung und der Automatisierung bzw. Autonomisierung der Geschäftsprozesse. Für Stadtwerke gilt es nun, die Chancen der Digitalisierung zu ihren Gunsten zu nutzen. Ein Startpunkt könnte hierbei sein, wie Stadtwerke zukünftig mit ihren Kunden interagieren. Ausgelöst durch die Liberalisierung der Märkte rückt der Kunde heute stärker in den Mittelpunkt - die Energiewirtschaft steht nun vor der Herausforderung, dem Wettbewerb einen Schritt voraus zu sein und dem Kunden ein absolut positives Kundenerlebnis (Customer Experience) sowohl als Maßnahme zur Kundenbindung als auch zum Kundenaufbau zu bieten. Das vorliegende Kapitel zeigt hierfür die Erfolgskriterien für die gelungene Etablierung des Kundenfokus im eigenen Unternehmen auf. Mit dem Customer-Focus-Cycle-Modell von Fujitsu, angelehnt an den Deming-Kreislauf, wird ein allgemeingültiger Ansatz für ein mögliches Vorgehen beim Aufbau des Kundenfokus vorgestellt. Die sechs Phasen werden dabei anhand praktischer Beispiele erläutert und geben zudem Hinweise zu Methoden und Tools. Aus dem vorgestellten "Werkzeugkasten" wird ferner die Customer-Journey-Methode im Detail erläutert. Weiter soll das präsentierte Reifegradmodell Unternehmen dabei unterstützen, den eigenen Status quo festzustellen und die persönlichen Ziele auf dem Weg zur kundenzentrierten Organisation festzulegen.

  10. Analyse der pharmazeutischen Versorgungssituation von Patienten mit Psoriasis-Arthritis auf Basis von Routinedaten der Gesetzlichen Krankenversicherung.

    PubMed

    Sondermann, Wiebke; Ventzke, Julia; Matusiewicz, David; Körber, Andreas

    2018-03-01

    Die Psoriasis-Arthritis (PsA) gehört zu den chronisch entzündlichen Gelenkerkrankungen. Trotz zahlreicher versorgungswissenschaftlicher Studien in Deutschland liegen zur pharmazeutischen Versorgungssituation von PsA-Patienten bisher kaum aktuelle Ergebnisse vor. Mit Hilfe einer systematischen Literaturrecherche sowie anhand von Routinedaten der Allgemeinen Ortskrankenkasse (AOK) Rheinland/Hamburg wird ein aktueller Überblick über die pharmazeutische Versorgung von PsA-Patienten in Deutschland gegeben. Selektiert wurden Versicherte aus dem ambulanten und stationären Bereich, die im 1. und 2. Quartal des Jahres 2014 die gesicherte Abrechnungsdiagnose Psoriasis-Arthritis L40.5+ aufwiesen. Anschließend wurden auf Basis dieser "vorab definierten" Kohorte die Arzneimitteldaten für 5 Jahre (01.01.2010-31.12.2014) abgerufen. Es konnten insgesamt n  =  3205 Versicherte (45 % männlich, 55 % weiblich) der AOK Rheinland/Hamburg mit einer gesicherten PsA-Diagnose selektiert werden. Das Durchschnittsalter betrug 58,9 Jahre. 53,7 % der PsA-Patienten wurden mit systemischen PsA-relevanten Arzneimitteln versorgt. Nichtsteroidale Antirheumatika (NSAR) wurden am häufigsten verordnet, gefolgt von systemischen Glucocorticoiden. Von den selektierten PsA-Patienten, die eine Systemtherapie erhielten, wurden 72,1 % mittels einer Disease-modifying-antirheumatic-Drug (DMARD)-Monotherapie behandelt, gefolgt von der Kombinationstherapie aus DMARDs und Biologika (20,9 %). Die pharmakologische Therapie der PsA muss eine Gewährleistung zwischen adäquater Versorgung der PsA mit Verhinderung der Krankheitsprogression und ökonomischer Verantwortung darstellen. © 2018 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  11. Optimizing Distributed Energy Resources and building retrofits with the strategic DER-CAModel

    DOE PAGES

    Stadler, M.; Groissböck, M.; Cardoso, G.; ...

    2014-08-05

    The pressuring need to reduce the import of fossil fuels as well as the need to dramatically reduce CO 2 emissions in Europe motivated the European Commission (EC) to implement several regulations directed to building owners. Most of these regulations focus on increasing the number of energy efficient buildings, both new and retrofitted, since retrofits play an important role in energy efficiency. Overall, this initiative results from the realization that buildings will have a significant impact in fulfilling the 20/20/20-goals of reducing the greenhouse gas emissions by 20%, increasing energy efficiency by 20%, and increasing the share of renewables tomore » 20%, all by 2020. The Distributed Energy Resources Customer Adoption Model (DER-CAM) is an optimization tool used to support DER investment decisions, typically by minimizing total annual costs or CO 2 emissions while providing energy services to a given building or microgrid site. This document shows enhancements made to DER-CAM to consider building retrofit measures along with DER investment options. Specifically, building shell improvement options have been added to DER-CAM as alternative or complementary options to investments in other DER such as PV, solar thermal, combined heat and power, or energy storage. The extension of the mathematical formulation required by the new features introduced in DER-CAM is presented and the resulting model is demonstrated at an Austrian Campus building by comparing DER-CAM results with and without building shell improvement options. Strategic investment results are presented and compared to the observed investment decision at the test site. Results obtained considering building shell improvement options suggest an optimal weighted average U value of about 0.53 W/(m 2K) for the test site. This result is approximately 25% higher than what is currently observed in the building, suggesting that the retrofits made in 2002 were not optimal. Furthermore, the results obtained with DER-CAM illustrate the complexity of interactions between DER and passive measure options, showcasing the need for a holistic optimization approach to effectively optimize energy costs and CO 2 emissions. Lastly, the simultaneous optimization of building shell improvements and DER investments enables building owners to take one step further towards nearly zero energy buildings (nZEB) or nearly zero carbon emission buildings (nZCEB), and therefore support the 20/20/20 goals.« less

  12. Optimizing Distributed Energy Resources and building retrofits with the strategic DER-CAModel

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stadler, M.; Groissböck, M.; Cardoso, G.

    The pressuring need to reduce the import of fossil fuels as well as the need to dramatically reduce CO 2 emissions in Europe motivated the European Commission (EC) to implement several regulations directed to building owners. Most of these regulations focus on increasing the number of energy efficient buildings, both new and retrofitted, since retrofits play an important role in energy efficiency. Overall, this initiative results from the realization that buildings will have a significant impact in fulfilling the 20/20/20-goals of reducing the greenhouse gas emissions by 20%, increasing energy efficiency by 20%, and increasing the share of renewables tomore » 20%, all by 2020. The Distributed Energy Resources Customer Adoption Model (DER-CAM) is an optimization tool used to support DER investment decisions, typically by minimizing total annual costs or CO 2 emissions while providing energy services to a given building or microgrid site. This document shows enhancements made to DER-CAM to consider building retrofit measures along with DER investment options. Specifically, building shell improvement options have been added to DER-CAM as alternative or complementary options to investments in other DER such as PV, solar thermal, combined heat and power, or energy storage. The extension of the mathematical formulation required by the new features introduced in DER-CAM is presented and the resulting model is demonstrated at an Austrian Campus building by comparing DER-CAM results with and without building shell improvement options. Strategic investment results are presented and compared to the observed investment decision at the test site. Results obtained considering building shell improvement options suggest an optimal weighted average U value of about 0.53 W/(m 2K) for the test site. This result is approximately 25% higher than what is currently observed in the building, suggesting that the retrofits made in 2002 were not optimal. Furthermore, the results obtained with DER-CAM illustrate the complexity of interactions between DER and passive measure options, showcasing the need for a holistic optimization approach to effectively optimize energy costs and CO 2 emissions. Lastly, the simultaneous optimization of building shell improvements and DER investments enables building owners to take one step further towards nearly zero energy buildings (nZEB) or nearly zero carbon emission buildings (nZCEB), and therefore support the 20/20/20 goals.« less

  13. Isotrope und homogene Materie - Kosmen; On Dynamics and Thermodynamics of Isotropic Matter-Universes

    NASA Astrophysics Data System (ADS)

    Treder, H.-J.

    Die Dynamik und Thermodynamik großer kosmischer Systeme ist fast unabhängig von den besonderen Theorien über die Gravitation. Nur die Feinstruktur der Kosmologie und Kosmonogie reflektiert die speziellen Hypothesen. Diese Neutralität gegenüber den konkreten Gravodynamiken ist die Konsequenz der fundamentalen Eigenschaften der Gravitation: Der Prinzipien der Äquivalenz von Trägheit und Schwere. The dynamics and thermodynamics of great cosmical systems are nearly independent of the theory of gravitation and only the fine-structure of cosmogony and cosmology reflects the special hypotheses.The neutrality against the concret gravodynamics is a consequence of the fundamental properties of gravitation: the principlies of equivalence of gravity and inertia.

  14. Epidermal electronics.

    PubMed

    Kim, Dae-Hyeong; Lu, Nanshu; Ma, Rui; Kim, Yun-Soung; Kim, Rak-Hwan; Wang, Shuodao; Wu, Jian; Won, Sang Min; Tao, Hu; Islam, Ahmad; Yu, Ki Jun; Kim, Tae-il; Chowdhury, Raeed; Ying, Ming; Xu, Lizhi; Li, Ming; Chung, Hyun-Joong; Keum, Hohyun; McCormick, Martin; Liu, Ping; Zhang, Yong-Wei; Omenetto, Fiorenzo G; Huang, Yonggang; Coleman, Todd; Rogers, John A

    2011-08-12

    We report classes of electronic systems that achieve thicknesses, effective elastic moduli, bending stiffnesses, and areal mass densities matched to the epidermis. Unlike traditional wafer-based technologies, laminating such devices onto the skin leads to conformal contact and adequate adhesion based on van der Waals interactions alone, in a manner that is mechanically invisible to the user. We describe systems incorporating electrophysiological, temperature, and strain sensors, as well as transistors, light-emitting diodes, photodetectors, radio frequency inductors, capacitors, oscillators, and rectifying diodes. Solar cells and wireless coils provide options for power supply. We used this type of technology to measure electrical activity produced by the heart, brain, and skeletal muscles and show that the resulting data contain sufficient information for an unusual type of computer game controller.

  15. Epidermal Electronics

    NASA Astrophysics Data System (ADS)

    Kim, Dae-Hyeong; Lu, Nanshu; Ma, Rui; Kim, Yun-Soung; Kim, Rak-Hwan; Wang, Shuodao; Wu, Jian; Won, Sang Min; Tao, Hu; Islam, Ahmad; Yu, Ki Jun; Kim, Tae-il; Chowdhury, Raeed; Ying, Ming; Xu, Lizhi; Li, Ming; Chung, Hyun-Joong; Keum, Hohyun; McCormick, Martin; Liu, Ping; Zhang, Yong-Wei; Omenetto, Fiorenzo G.; Huang, Yonggang; Coleman, Todd; Rogers, John A.

    2011-08-01

    We report classes of electronic systems that achieve thicknesses, effective elastic moduli, bending stiffnesses, and areal mass densities matched to the epidermis. Unlike traditional wafer-based technologies, laminating such devices onto the skin leads to conformal contact and adequate adhesion based on van der Waals interactions alone, in a manner that is mechanically invisible to the user. We describe systems incorporating electrophysiological, temperature, and strain sensors, as well as transistors, light-emitting diodes, photodetectors, radio frequency inductors, capacitors, oscillators, and rectifying diodes. Solar cells and wireless coils provide options for power supply. We used this type of technology to measure electrical activity produced by the heart, brain, and skeletal muscles and show that the resulting data contain sufficient information for an unusual type of computer game controller.

  16. Precision Luminosity of LHC Proton-Proton Collisions at 13 TeV Using Hit Counting With TPX Pixel Devices

    NASA Astrophysics Data System (ADS)

    Sopczak, André; Ali, Babar; Asawatavonvanich, Thanawat; Begera, Jakub; Bergmann, Benedikt; Billoud, Thomas; Burian, Petr; Caicedo, Ivan; Caforio, Davide; Heijne, Erik; Janeček, Josef; Leroy, Claude; Mánek, Petr; Mochizuki, Kazuya; Mora, Yesid; Pacík, Josef; Papadatos, Costa; Platkevič, Michal; Polanský, Štěpán; Pospíšil, Stanislav; Suk, Michal; Svoboda, Zdeněk

    2017-03-01

    A network of Timepix (TPX) devices installed in the ATLAS cavern measures the LHC luminosity as a function of time as a stand-alone system. The data were recorded from 13-TeV proton-proton collisions in 2015. Using two TPX devices, the number of hits created by particles passing the pixel matrices was counted. A van der Meer scan of the LHC beams was analyzed using bunch-integrated luminosity averages over the different bunch profiles for an approximate absolute luminosity normalization. It is demonstrated that the TPX network has the capability to measure the reduction of LHC luminosity with precision. Comparative studies were performed among four sensors (two sensors in each TPX device) and the relative short-term precision of the luminosity measurement was determined to be 0.1% for 10-s time intervals. The internal long-term time stability of the measurements was below 0.5% for the data-taking period.

  17. Peeling off effects in vertically aligned Fe3C filled carbon nanotubes films grown by pyrolysis of ferrocene

    NASA Astrophysics Data System (ADS)

    Boi, Filippo S.; Medranda, Daniel; Ivaturi, Sameera; Wang, Jiayu; Guo, Jian; Lan, Mu; Wen, Jiqiu; Wang, Shanling; He, Yi; Mountjoy, Gavin; Willis, Maureen A. C.; Xiang, Gang

    2017-06-01

    We report the observation of an unusual self-peeling effect which allows the synthesis of free standing vertically aligned carbon nanotube films filled with large quantities of Fe3C and small quantities of γ-Fe crystals. We demonstrate that this effect depends on the interplay of three main factors: (1) the physical interactions between the chosen substrate surface and grown carbon nanotubes (CNTs), which is fixed by the composition of the used substrate (111 SiO2/Si or quartz), (2) the CNT-CNT Van der Waals interactions, and (3) the differential thermal contraction between the grown CNT film and the used substrate, which is fixed by the cooling rate differences between the grown film and the used quartz or Si/SiO2 substrates. The width and stability of these films are then further increased to cm-scale by addition of small quantities of toluene to the ferrocene precursor.

  18. North Korea’s Juche Ideology and the German Re-Unification Experience

    DTIC Science & Technology

    2008-06-01

    repräsentativen Befragung in Ost- und Westdeutschland 2006,” Selbständige Abteilung für Medizimische Psychologie und Medizinische Soziologie der Universität...207 Ibid. “Auf anderen Ebenen – denen der Wirtschaft und der Psychologie – führte die rasche Übernahme des westdeutschen Systems zu Zerstörungen... Psychologie und Medizinische Soziologie der Universität Leipzig. (May/June 2006). http://medpsy.uniklinikum- leipzig.de/pdf/deutsche_befindlichkeiten_2006

  19. Mikrospritzgießen

    NASA Astrophysics Data System (ADS)

    Ebert, Karl-Herbert; Ammer, Daniel; Hoffstetter, Marc; Wintermantel, Erich

    Bei der Betrachtung von aktuellen Produktentwicklungen lässt sich durch alle Branchen hinweg ein deutlicher Trend zur Miniaturisierung und Funktionsintegration auf kleinstem Raum erkennen. Der Einsatz technischer Kunststoffe, die überwiegend im Thermoplast-Spritzgießverfahren verarbeitet werden, leistet dabei einen wichtigen Beitrag um diese Produktentwicklungen in marktfähige Artikel umsetzen zu können. Hierbei sind im Vergleich zum Standardspritzgießen einige Besonderheiten hinsichtlich des Formenbaus, der Anlagen- sowie Prozesstechnik und der Qualitätssicherung zu beachten.

  20. The Influence of Field Marshal Colmar Von Der Goltz on Ottoman Military Effectiveness in Mesopotamia: December 1915 to April 1916

    DTIC Science & Technology

    2012-02-23

    SUBTITLE The Influence of Field Marshal Colmar Von Der Goltz on Ottoman Military Effectiveness in Mesopotamia: December 1915 to April 1916 5a...SUPPLEMENTARY NOTES N/A 14. ABSTRACT This paper discusses the contributions made by Field Marshal Colmar von der Goltz on the development of Ottoman...Kut. 15. SUBJECT TERMS Colmar von der Goltz ; Military advisor; Mesopotamian Campaign; Ottoman; Ottoman military effectiveness; British; Kut; World

  1. Grundlagen des Tissue Engineering

    NASA Astrophysics Data System (ADS)

    Mayer, Jörg; Blum, Janaki; Wintermantel, Erich

    Die Organtransplantation stellt eine verbreitete Therapie dar, um bei krankheitsoder unfallbedingter Schädigung eines Organs die Gesamtheit seiner Funktionen wieder herzustellen, indem es durch ein Spenderorgan ersetzt wird. Organtransplantationen werden für die Leber, die Niere, die Lunge, das Herz oder bei schweren grossflächigen Verbrennungen der Haut vorgenommen. Der grosse apparative, personelle und logistische Aufwand und die Risiken der Transplantationschirurgie (Abstossungsreaktionen) sowie die mangelnde Verfügbarkeit von immunologisch kompatiblen Spenderorganen führen jedoch dazu, dass der Bedarf an Organtransplantaten nur zu einem sehr geringen Teil gedeckt werden kann. Sind Spenderorgane nicht verfügbar, können in einzelnen Fällen lebenswichtige Teilfunktionen, wie beispielsweise die Filtrationsfunktion der Niere durch die Blutreinigung mittels Dialyse ersetzt oder, bei mangelnder Funktion der Bauchspeicheldrüse (Diabetes), durch die Verabreichung von Insulin ein normaler Zustand des Gesamtorganismus auch über Jahre hinweg erhalten werden. Bei der notwendigen lebenslangen Anwendung apparativer oder medikamentöser Therapie können für den Patienten jedoch häufig schwerwiegende, möglicherweise lebensverkürzende Nebenwirkungen entstehen. Daher werden in der Forschung Alternativen gesucht, um die Funktionen des ausgefallenen Organs durch die Implantation von Zellen oder in vitro gezüchteten Geweben möglichst umfassend wieder herzustellen. Dies erfordert biologisch aktive Implantate, welche die für den Stoffwechsel des Organs wichtigen Zellen enthalten und einen organtypischen Stoffwechsel entfalten.

  2. Update zum klinischen Einsatz von Inhibitoren mutierter Phosphokinasen beim Melanom.

    PubMed

    Cosgarea, Ioana; Ritter, Cathrin; Becker, Jürgen C; Schadendorf, Dirk; Ugurel, Selma

    2017-09-01

    Die Behandlungsstrategie beim metastasierten Melanom hat sich mit der Identifizierung therapeutisch angreifbarer molekularer Zielstrukturen innerhalb zellulärer Signalwege radikal geändert. Durch die Zulassung von Substanzen, die gezielt an den zentralen Schaltmolekülen, den Phosphokinasen, angreifen, können diese Signalwege selektiv abgeschaltet werden. Dies ist insbesondere bei denjenigen Tumoren von Interesse, deren Signalwege durch aktivierende Mutationen der für die Schaltmoleküle kodierenden Gene konstitutiv aktiviert sind. Aktuell ist diese therapeutische Strategie insbesondere für Patienten bedeutsam, deren Melanome eine Mutation im BRAF-Gen aufweisen. Diese Patienten können durch eine Kombinationstherapie aus Inhibitoren der Phosphokinasen BRAF und MEK langfristig mit sehr guter Krankheitskontrolle behandelt werden. Unter dieser Kombinationstherapie wird aktuell ein progressionsfreies Überleben von über zehn Monaten und ein Gesamtüberleben von mehr als zwei Jahren bei guter Lebensqualität erzielt. Da unter längerfristiger Therapie mit Kinaseinhibitoren jedoch bei einem Großteil der Patienten eine Resistenzbildung auftritt, sind aktuelle klinische Therapiestudien auf die Suche nach geeigneten Kombinationspartnern unter Blockierung anderer Signalwege oder unter Aktivierung der T-Zell-vermittelten Immunantwort ausgerichtet. Der vorliegende Übersichtsartikel stellt sowohl die aktuell verfügbaren als auch die in der klinischen Testung befindlichen zukünftigen Optionen der zielgerichteten Therapie des Melanoms dar. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  3. Poor health as a potential risk factor for job loss due to automation: the case of Norway.

    PubMed

    Hessel, Philipp; Christiansen, Solveig; Skirbekk, Vegard

    2018-03-01

    This study aimed to quantify the extent to which health characteristics of workers are related to the potential risk of experiencing job displacement due to automation. Linking the 2015 Norwegian Statistics on Income and Living Conditions survey (n=6393) with predicted probabilities of automation by occupation, we used Kruskal-Wallis tests and multivariate generalised linear models to assess the association between long-standing illnesses and risk of job automation. Individuals with long-standing illnesses face substantially greater risks of losing their job due to automation. Whereas the average risk of job automation is 57% for men and 49% for women with long-standing illnesses, the risk is only 50% for men and 44% for women with limitations (p<0.001). Controlling for age, having a long-standing illness significantly increases the relative risk of facing job automation among men (risk ratio (RR) 1.13, 95% CI 1.09 to 1.19), as well as women (RR 1.11, 95% CI 1.05 to 1.17). While, among men, the association between long-standing illness and risk of job automation remains significant when controlling for education and income, it becomes insignificant among women. Individuals with poor health are likely to carry the highest burden of technological change in terms of worsening employment prospects because of working in occupations disproportionally more likely to be automated. Although the extent of technology-related job displacement will depend on several factors, given the far-reaching negative consequences of job loss on health and well-being, this process represents a significant challenge for public health and social equity. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  4. Developing Peer Mentoring Support for TAFE Students Entering 1st-Year University Early Childhood Studies

    ERIC Educational Resources Information Center

    Heirdsfield, Ann; Walker, Sue; Walsh, Kerryann

    2005-01-01

    At Queensland University of Technology (QUT, Australia), in the Bachelor of Education (BEd) (Early Childhood) (EC), Technical and Further Education (TAFE) students with a diploma enroll with advanced standing (1 year's credit). These students share many challenges faced by 1st-year university students--workload, technology, academic orientation,…

  5. Evaluating Web 2.0 Technologies in Higher Education Using Students' Perceptions and Performance

    ERIC Educational Resources Information Center

    Karvounidis, T.; Chimos, K.; Bersimis, S.; Douligeris, C.

    2014-01-01

    In this work, Web 2.0 technologies in higher education are evaluated using students' perceptions, satisfaction, performance and behaviour. The study evaluates the Web 2.0 tools as stand-alone entities as well in terms of their cross-operability and integration (confluence) to synergistic contributions towards the enhancement of student…

  6. The Characteristics of a Model Technology Education Teacher

    ERIC Educational Resources Information Center

    Kaufman, Andrew R.; Warner, Scott A.; Buechele, Jessica R.

    2011-01-01

    The things that make the quality of a teacher stand out can cover a wide range of characteristics, actions, words, and experiences. The mark left on a student by a teacher, for good or bad, is written in an ink that will last a lifetime. This article describes a study that identifies the characteristics of exceptional technology education…

  7. [Cardiodoron® bei Patienten mit Schlafstörungen - Ergebnisse einer prospektiven Beobachtungsstudie].

    PubMed

    Rother, Claudia; Schnelle, Martin

    Hintergrund: Schlafstörungen gehören zu den häufigsten gesundheitlichen Problemen der heutigen Zeit. Stress und die dadurch bedingte innere Anspannung sowie eine unrhythmische Lebensführung z.B. durch Schichtarbeit sind bekannte auslösende Faktoren. Weniger bekannt ist, dass auch funktionelle Herz-Kreislauf-Beschwerden zu Störungen des Schlafs führen können und dass deren Behandlung zu einer Verbesserung der Schlafqualität beiträgt. Ganzheitlich betrachtet geht es daher um die Wiederherstellung einer gesunden Rhythmik, insbesondere des Herz-/Atem- sowie des Schlaf-Wach-Rhythmus, die Cardiodoron®, eine Heilpflanzenkomposition aus Primula veris, Hyoscyamus niger und Onopordum acanthium, unterstützt. Patienten und Methoden: Mittels einer prospektiven, multizentrischen Beobachtungsstudie sollte ermittelt werden, wie sich funktionelle Herz-Kreislauf-Beschwerden und/oder Schlafstörungen unter der Behandlung mit Cardiodoron® (Dilution) über 3-6 Monate entwickeln. Im Zeitraum von September 2009 bis März 2012 dokumentierten 92 Ärzte 501 Patienten, von denen 380 über Schlafstörungen klagten und deren Daten in dieser Publikation näher betrachtet werden. Nach einer Aufnahmeuntersuchung erfolgte nach 90 Tagen eine Abschlussuntersuchung und bei Fortführung der Therapie nach nochmals 90 Tagen eine Follow-up-Untersuchung. Neben 30 ärztlicherseits bewerteten Symptomen beurteilten die Patienten ihr Befinden mittels Pittsburgh Sleep Quality Index (PSQI) nach Buysse und der Beschwerden-Liste nach von Zerssen (B-L und B-L'). Ergebnisse: Unter der Cardiodoron®-Therapie gingen bei guter Verträglichkeit sowohl die Ausprägung der Schlafstörungen (um 65% von 2,0 auf 0,7 Punkte) als auch die erfassten 30 Symptome (um 59% von 24,3 auf 9,9 Punkte) deutlich zurück (p < 0,01). Weiterhin reduzierten sich der PSQI und der Gesamtwert der Beschwerden-Liste signifikant (p < 0,0001) um 60% bzw. 56% (von 12,2 auf 4,8 bzw. von 25,6 auf 11,4 Punkte). Schlussfolgerungen: Bei Patienten mit Schlafstörungen (mit oder ohne funktionelle Herz-Kreislauf-Beschwerden) kann die Ausprägung der Beschwerden mit Cardiodoron® deutlich gesenkt werden. Cardiodoron® ist gut verträglich. © 2016 S. Karger GmbH, Freiburg.

  8. Indoor factors associated with concentrations of house dust mite allergen, Der p 1, in a random sample of houses in Norwich, UK.

    PubMed

    Luczynska, C; Sterne, J; Bond, J; Azima, H; Burney, P

    1998-10-01

    Studies of house dust mite allergen concentrations suggest large variations both within and between homes. It is likely that different household characteristics influence allergen levels in different locations within the house. To investigate household characteristics associated with higher concentrations of house dust mite allergen in a random sample of houses. Information on indoor environment was obtained from 158 adults aged 20-44. Dust samples were collected from their living room floor, bedroom floor and mattress. Concentrations of Der p 1, the major allergen from the house dust mite Dermatophagoides pteronyssinus, were measured by monoclonal antibody immunoassay. Associations between mite allergen concentrations and household characteristics were examined using censored-normal regression models. Factors that were related to Der p 1 (P

  9. Is sperm FISH analysis still useful for Robertsonian translocations? Meiotic analysis for 23 patients and review of the literature.

    PubMed

    Lamotte, Anna; Martinez, Guillaume; Devillard, Françoise; Hograindleur, Jean-Pascal; Satre, Véronique; Coutton, Charles; Harbuz, Radu; Amblard, Florence; Lespinasse, James; Benchaib, Mehdi; Bessonnat, Julien; Brouillet, Sophie; Hennebicq, Sylviane

    2018-01-01

    Robertsonian translocations (RobT) are common structural chromosome rearrangements where carriers display a majority of chromosomally balanced spermatozoa from alternate segregation mode. According to some monotony observed in the rates of balanced segregation, is sperm FISH analysis obsolete for RobT carriers? Retrospective cohort research study on 23 patients analyzed in our center from 2003 to 2017 and compared to the data of 187 patients in literature from 1983 to 2017.Robertsonian translocation carriers were divided in six groups according to the chromosomes involved in the translocation: 9 patients from our center and 107 from literature carrying 45,XY,der(13;14) karyotype, 3 and 35 patients respectively with 45,XY,der(14;21), 5 and 11 patients respectively with 45,XY,der(13;15), 4 and 7 patients respectively with 45,XY,der(14;15), 1 and 4 patients respectively with 45,XY,der(13;22),and 1 and 10 patients respectively with 45,XY,der(14;22). Alternate segregation mode is predominant in our group of Robertsonian translocation carriers with 73.45% ±8.05 of balanced spermatozoa (min 50.92%; max 89.99%). These results are compliant with the data from literature for all translocations types ( p  > 0.05) and are consistent among the different types of Robertsonian translocations ( p  > 0.05) except for der(13;15) that exhibit lower balanced spermatozoa rates ( p  < 0.05 versus der(13;14), der(14;21), (13;21) and der(15;22)). Normozoospermic patients also display a significantly ( p  < 0.01) higher rate of balanced sperm cells than patients with abnormal seminograms whatever the defect implied. According to the discrepancies observed between der(13;15) and all the other Rob T carriers, the differences observed among patients presenting normal and abnormal sperm parameters and the input in genetical counselling, sperm FISH does not seem obsolete for these patients. Moreover, it seems important to collect more data for rare RobT.

  10. FORS am Very Large Telescope der Europäischen Südsternwarte

    NASA Astrophysics Data System (ADS)

    1998-09-01

    Erstes wissenschaftliches Beobachtungsinstrument liefert eindrucksvolle Bilder Entsprechend dem straffen Zeitplan wird das ESO Very Large Teleskop Projekt (VLT-Projekt) auf dem Cerro Paranal in Nord-Chile verwirklicht: die volle Betriebsbereitschaft des ersten der vier 8,2m-Einzelteleskope wird Anfang des nächsten Jahres erreicht sein. Am 15. September 1998 wurde ein weiterer wichtiger Meilenstein erfolgreich, rechtzeitig und innerhalb des Kostenplans erreicht. Nur wenige Tage nach seiner Montage am ersten 8,2m-Einzelteleskop des VLT (UT1) konnte FORS1 ( FO cal R educer and S pectrograph) als erstes einer Gruppe leistungsfähiger und komplexer wissenschaftlicher Instrumente seine Beobachtungstätigkeit beginnen. Von Anfang an konnte es eine Reihe exzellenter astronomischer Bilder aufnehmen. Dieses bedeutende Ereignis eröffnet eine Fülle neuer Möglichkeiten für die europäische Astronomie. FORS - ein Höhepunkt an Komplexität FORS1 und das zukünftige Zwillingsinstrument (FORS2) sind das Ergebnis einer der eingehendsten und fortschrittlichsten technologischen Studien, die je für ein Instrument der bodengebundenen Astronomie durchgeführt wurden. Dieses einzigartige Instrument ist nun im Cassegrain-Fokus installiert und verschwindet beinahe, trotz seiner Dimensionen von 3 x 1.5m (Gewicht 2.3t), unterhalb des riesigen 53 m 2 großen Zerodurspiegels. Um die große Spiegelfläche und die hervorragende Bildqualität von UT1 optimal auszunützen, wurde FORS speziell so konstruiert, daß es die lichtschwächsten und entferntesten Objekte im Weltall untersuchen kann. Bald wird dieses komplexe VLT-Instrument den europäischen Astronomen erlauben, die derzeitigen Beobachtungshorizonte entscheidend zu erweitern. Die beiden FORS-Instrumente sind Vielzweck-Beobachtungsinstrumente, die in mehreren unterschiedlichen Beobachtungsarten eingesetzt werden können. Beispielsweise können Bilder mit zwei verschiedenen Abbildungsmaßstäben (Vergrößerungen) sowie Spektren mit unterschiedlicher spektraler Auflösung von einzelnen oder mehreren Objekten aufgenommen werden. Dabei erlaubt der schnelle Wechsel zwischen den unterschiedlichen Beobachtungsarten z.B. zunächst die Aufnahme und direkt anschließend die Spektroskopie weit entfernter Galaxien. Damit kann dann u.a. die stellare Zusammensetzung und die Entfernung bestimmt werden. Als eines der leistungsfähigsten astronomischen Instrumente seiner Art wird FORS1 ein wahres Arbeitspferd für die Untersuchung des fernen Universums darstellen. Der Bau von FORS Das FORS-Projekt wird unter ESO-Kontrakt von einem Konsortium dreier deutscher astronomischer Institute durchgeführt, der Landessternwarte Heidelberg und den Universitäts-Sternwarten von Göttingen and München. Bis zur Beendigung des Projekts werden die beteiligten Institute Arbeit im Umfang von ca. 180 Mann-Jahren eingebracht haben. Bei der Landessternwarte Heidelberg lag die Leitung des Projekts. Hier wurde außerdem das gesamte optische System konstruiert, die Beschaffung der Komponenten der abbildenden Optik und der Zusatzoptiken für Spektroskopie und Polarimetrie durchgeführt und die spezielle Computersoftware geschrieben, mit der die von FORS gelieferten Daten verarbeitet und ausgewertet werden. Darüber hinaus wurde in der Werkstatt der Sternwarte ein Teleskopsimulator gebaut, mit dem alle wesentlichen Funktionen von FORS in Europa getestet werden konnten, bevor das Instrument zum Paranal (Chile) transportiert wurde. An der Universitäts-Sternwarte Göttingen wurden Konstruktion, Herstellung und Zusammenbau der gesamten Mechanik von FORS durchgeführt. Der größte Teil der Präzisionsteile, insbesondere der Multispalteinheit, wurde in der feinmechanischen Werkstatt der Sternwarte hergestellt. Die Beschaffung der großen Instrumentengehäuse und Flansche, die Computeranalysen für mechanische und thermische Stabilität des empfindlichen Spektrographen und die Herstellung der speziellen Werkzeuge für Handhabung, Wartung und Justierung lag ebenso in der Verantwortung dieser Sternwarte wie die Tests der zahlreichen opto- und elektromechanischen Funktionen. Die Universitäts-Sternwarte München war verantwortlich für das Projektmanagement, Integration und Test des gesamten Instruments im Labor, für Planung und Einbau aller Elektronik und Elektromechanik, sowie für Entwicklung und Test der gesamten Software, die FORS in allen Teilen vollständig per Computer steuert (z.B. Filter- und Grismräder, Verschlüsse, Spalteinheit für die Vielspaltspektroskopie, Masken, alle optischen Komponenten, Elektromotoren, Encoder usw.). Zusätzlich wurde Computersoftware geschrieben, mit der die komplexen astronomischen Beobachtungen mit FORS vorbereitet werden und das Verhalten des Instruments durch eine ständige Kontrolle der gesammelten wissenschaftlichen Daten überwacht wird. Als Gegenleistung für den Bau von FORS erhalten die Astronomen der drei beteiligten Institute des FORS-Konsortiums eine gewisse Anzahl von Nächten an "garantierter Beobachtungszeit" am VLT. In dieser Beobachtungszeit werden verschiedene Forschungsprojekte durchgeführt, deren Themen unter anderem von kleinen Körpern im äußeren Sonnensystem über Untersuchungen von Sternen im Endstadium und den von ihnen abgestoßenen Gaswolken bis zur Erforschung ferner Galaxien und Quasare reichen, die Aufschluß über die frühen Zeiten unseres Universums geben. Erste Tests von FORS1 am VLT-UT1: ein großartiger Erfolg Nach sorgfältiger Vorbereitung hat das FORS-Konsortium nun mit der Inbetriebnahme ("Commissioning") des Instruments begonnen. Dazu gehören ein eingehender Nachweis der spezifizierten Leistungsfähigkeit am Teleskop, die Überprüfung der korrekten Funktionsweise unter Softwaresteuerung vom Kontrollraum auf Paranal, und am Ende dieses Prozesses eine Demonstration, daß das Instrument seinen angestrebten wissenschaftlichen Zweck erfüllt. Während der Durchführung dieser Tests gelangen dem Commissioning-Team auf Paranal eine Reihe von Aufnahmen verschiedener astronomischer Objekte, von denen einige hier wiedergegeben sind. Sie wurden alle mit FORS in der Standardauflösung gewonnen (Bildfeldgröße 6.8 x 6.8 Bogenminuten, Pixelgröße 0.20 Bogensekunden) und zeigen einige der eindrucksvollen Möglichkeiten, die das neue Instrument bietet. Spiralgalaxie NGC 1288 ESO PR Photo 37a/98 ESO PR Photo 37a/98 [Preview - JPEG: 800 x 908 pix - 224k] [High-Res - JPEG: 3000 x 3406 pix - 1.5Mb] Farbaufnahme der Spiralgalaxie NGC 1288, aufgenommen in der ersten Beobachtungsnacht von FORS ("Nacht des ersten Lichts"). Das erste Photo zeigt eine Dreifarbenaufnahme der schönen Spiralgalaxie NGC 1288 im südlichen Sternbild Fornax. PR Photo 37a/98 umfaßt das gesamte Feld, das mit der 2048 x 2048 Pixel großen CCD-Kamera abgebildet wurde. Es wurde aus drei CCD-Aufnahmen zusammengesetzt, die bei gutem Seeing in verschiedenen Farben in der "Nacht des ersten Lichts" (15. September 1998) aufgenommen wurden. Diese Galaxie mit einem Durchmesser von rund 200000 Lichtjahren ist etwa 300 Millionen Lichtjahre entfernt, ihre Fluchtgeschwindigkeit beträgt 4500 km/sec. Technische Informationen : Photo 37a/98 ist ein Komposit von drei Aufnahmen in den drei Filtern B (420nm, 6 Minuten belichtet), V (530nm, 3 Minuten) und I (800nm, 3 Minuten) während einer Periode mit 0.7 Bogensekunden Seeing. Das gezeigte Feld ist 6.8 x 6.8 Bogenminuten groß. Norden ist links, Osten unten. Entfernter Galaxienhaufen ESO PR Photo 37b/98 ESO PR Photo 37b/98 [Preview - JPEG: 657 x 800 pix - 248k] [High-Res - JPEG: 2465 x 3000 pix - 1.9Mb] Ein ungewöhnlicher Galaxienhaufen in der Umgebung des Quasars PB5763 . ESO PR Photo 37c/98 ESO PR Photo 37c/98 [Preview - JPEG: 670 x 800 pix - 272k] [High-Res - JPEG: 2512 x 3000 pix - 1.9Mb] Vergrößerung von PR Photo 37b/98; sie zeigt mehr Einzelheiten des ungewöhnlichen Galaxienhaufens. Die nächsten Photos wurden von einer 5-minütigen Aufnahme im Nahen Infrarot reproduziert, die ebenfalls in der "Nacht des ersten Lichts" von FORS1 (15. September 1998) gewonnen wurde. PR Photo 37b/98 zeigt einen Himmelsausschnitt in der Nähe des Quasars PB5763, in dem auch ein ungewöhnlicher, sehr weit entfernter Haufen von Galaxien zu sehen ist. Er besteht aus einer großen Zahl lichtschwacher Galaxien, die bisher noch nicht eingehend untersucht wurden. Dieser Haufen ist ein gutes Beispiel für die Art von Objekten, auf die viel Beobachtungszeit mit FORS verwendet werden wird, sobald der reguläre Beobachtungsbetrieb begonnen hat. Eine Vergrößerung des gleichen Feldes ist in PR Photo 37c/98 wiedergegeben. Sie zeigt die einzelnen Mitglieder dieses Galaxienhaufens im Detail. Man beachte besonders die interessante spindelförmige Galaxie, die anscheinend einen äquatorialen Ring aufweist. Neben einer schönen Spiralgalaxie sind auch noch viele weitere lichtschwache Galaxien zu erkennen. Sie sind entweder Zwerggalaxien und Mitglieder des Haufens oder befinden sich sehr viel weiter entfernt im Hintergrund des Haufens. Technische Informationen : PR Photos 37b/98 (als Negativ reproduziert) und 37c/98 (Positiv) stammen von einer Aufnahme, die bei 0.8 Bogensekunden Seeing durch ein I-Filter (nahes Infrarot, 800nm) gewonnen wurde. Die Belichtungszeit betrug 5 Minuten, und es wurde eine Flatfield-Korrektur durchgeführt. Das gezeigte Feld ist 6.8 x 6.8 Bogenminuten bzw. 2.5 x 2.3 Bogenminuten groß. Norden ist links oben, Osten links unten. Spiralgalaxie NGC 1232 ESO PR Photo 37d/98 ESO PR Photo 37d/98 [Preview - JPEG: 800 x 912 pix - 760k] [High-Res - JPEG: 3000 x 3420 pix - 5.7Mb] Ein Farbbild der Spiralgalaxie NGC 1232, aufgenommen am 21. September 1998. ESO PR Photo 37e/98 ESO PR Photo 37e/98 [Preview - JPEG: 800 x 961 pix - 480k] [High-Res - JPEG: 3000 x 3602 pix - 3.5Mb] Vergrößerung des Zentrums von PR Photo 37d/98. Dieses spektakuläre Bild der großen Spiralgalaxie NGC 1232 (Photo 37d/98) wurde am 21. September 1998 unter guten Beobachtungsbedingungen erhalten. Es wurde aus drei Einzelaufnahmen im ultravioletten, blauen und roten Licht zusammengesetzt. Die Farben der verschiedenen Regionen sind deutlich sichtbar: Das Zentralgebiet enthält ältere, rötlich leuchtende Sterne (Photo 37e/98), während die Spiralarme von jungen, bläulichen Sternen und roten Sternentstehungsgebieten bevölkert sind. Man beachte die gestörte Begleitgalaxie am linken Rand (Photo 37d/98), die wie der griechische Buchstabe "Theta" aussieht. NGC 1232 liegt 20 Grad südlich des Himmelsäquators im Sternbild Eridanus. Obwohl die Entfernung dieser Galaxie ungefähr 100 Millionen Lichtjahre beträgt, kann man auf Grund der exzellenten Bildqualität einen unglaublichen Reichtum an Details erkennen. Bei dieser Entfernung entspricht die Kantenlänge des Bildfeldes etwa 200000 Lichtjahren oder etwa der doppelten Größe unserer Milchstraße. Technische Informationen : Photos 37d/98 und 37e/98 sind ein Komposit von drei Aufnahmen in den drei Filtern U (360nm, 10 Minuten belichtet), B (420nm, 6 Minuten) und R (600nm, 2 Minuten 30 Sekunden) während einer Periode mit 0.7 Bogensekunden Seeing. Das gezeigte Feld ist 6.8 x 6.8 Bogenminuten bzw. 1.6 x 1.8 Bogenminuten groß. Norden ist oben, Osten links. Note: [1] Diese Pressemitteilung wird gemeinsam (auf Englisch und Deutsch) von der Europäischen Südsternwarte, der Landessternwarte Heidelberg und den Universitäts-Sternwarten Göttingen und München herausgegeben. An English Version of this Press Release is also available. Zugang zu ESO Presseinformationen ESO Presseinformationen werden im World Wide Web zur Verfügung gestellt (URL: http://www.eso.org/outreach/press-rel/). ESO Pressephotos dürfen veröffentlicht werden, wenn die Europäische Südsternwarte als Urheber genannt wird.

  11. Effekt einer ad libitum verzehrten fettreduzierten Kost, reich an Obst, Gemüse und Milchprodukten auf den Blutdruck bei Borderline-Hypertonikern

    NASA Astrophysics Data System (ADS)

    Möseneder, Jutta M.

    2002-01-01

    In der randomisierten, multizentrischen DASH-Studie (Dietary Approaches to Stop Hy-pertension), die unter kontrollierten Bedingungen stattfand, führte eine fettreduzierte Mischkost, reich an Obst, Gemüse und Milchprodukten, bei Borderline-Hypertonikern zu einer signifikanten Blutdrucksenkung. Während der Studienphase wurden Körpermasse, Natrium-Aufnahme sowie Alkoholzufuhr aufgrund der bekannten Einflussnahme auf den Blutdruck konstant gehalten. In der eigenen Pilot-Studie sollte untersucht werden, ob das Ergebnis der DASH-Studie (i) mit deutschen Hypertonikern und (ii) unter habituellen Ernährungs- und Lebensbedingungen mit regelmäßig durchgeführter Ernährungsberatung und ad libitum Verzehr anstelle des streng kontrollierten Studienansatzes bestätigt werden kann. Eine Konstanz der Körpermasse, der Natrium-Urinausscheidung (unter diesem Studienansatz valider als die Aufnahme) und des Alkoholkonsums wurde vorausgesetzt. Die Studienpopulation setzte sich aus 53 übergewichtigen Probanden mit einer nicht medikamentös therapierten Borderline-Hypertonie und ohne Stoffwechselerkrankungen zusammen. Die Studienteilnehmer wurden randomisiert entweder der Idealgruppe mit einer fettarmen Kost reich an Milchprodukten, Obst und Gemüse (ähnlich der DASH-Idealgruppe) oder der Kontrollgruppe mit habitueller Ernährungsweise zugeteilt. Über einen Zeitraum von fünf Wochen wurde den Probanden etwa 50% ihres täglichen Lebensmittelbedarfes entsprechend ihrer Gruppenzugehörigkeit kostenfrei zur Verfügung gestellt. Gelegenheitsblutdruckmessungen und 24h-Blutdruckmessungen, Ernährungs- und Aktivitätsprotokolle, Blut- und Urinproben sowie anthropometrische Messungen wurden vor, während und fünf Wochen nach der Interventionsphase durchgeführt. Die Ergebnisse zeigen, dass in der Idealgruppe keine signifikante Blutdrucksenkung beobachtet werden konnte. Dies lässt sich durch die Tatsache erklären, dass die Lebens-mittel- und Nährstoffaufnahme der deutschen Kontrollgruppe eher der amerikanischen Idealgruppe entsprach. In der Pilot-Studie waren die Unterschiede in der Nährstoffzufuhr zwischen den beiden Gruppen viel geringer als in der DASH-Studie; für eine blutdrucksenkende Ernährungsumstellung bestand somit nur ein geringer Spielraum. Eine weitere Erklärung besteht in der unterschiedlichen Zusammensetzung der Studienpopulation. Bei DASH wurden vorwiegend farbige Probanden (40% höhere Hypertonieprävalenz) untersucht. Die Studienergebnisse lassen also den Schluss zu, dass Ernährungs- und Lebensstilgewohnheiten sowie der genetische Hintergrund der entsprechenden Bevölkerungsgruppe bei der Formulierung von nährstoff- oder lebensmittelbezogenen Empfehlungen zur Senkung des Bluthochdruckes Berücksichtigung finden müssen. The Dietary Approaches to Stop Hypertension trial (DASH), a randomized well-controlled feeding study conducted at 4 medical centers, demonstrated that a low-fat diet, rich in fruits, vegetables and dairy products is able to lower blood pressure of borderline-hypertensive people significantly. Body weight, sodium intake and alcohol consumption were kept constant during the whole study period, due to the known influence on hypertension. Aim of our study project was to investigate whether the results of the DASH study can be confirmed by (i) using a German hypertensive population and (ii) replacing the well-controlled feeding design by allowing ad libitum intake according to dietary ad-vice. The participants were asked to keep their body weight, sodium urine excretion (un-der this study design more valid than sodium intake) and their alcohol consumption con-stant. Our pilot study population consisted of 53 mainly overweight participants with borderline hypertension and without medication or any metabolic disorders. They were randomly assigned to either an ideal diet low in fat and rich in dairy products, fruits and vegetables (similar to the DASH I-group) or a habitual diet as control (C-group). During five weeks the subjects were provided 50 % of their daily intake for free according to their dietary pattern. Single and 24h-blood pressure measurements, dietary weighed and physical activity records, blood and urine samples and anthropometric measurements were collected before, during and five weeks after the intervention period. The study results indicated that no significantly reduction of blood pressure could be observed for both methods in the I-group of our trial. This is due to the fact that the baseline intake of foods and nutrients of the German subjects was nearly corresponding to the intake targeted for the DASH I-group. Therefore, it was impossible to increase the intake of these nutrients in our I-group by the same percentage as in the DASH study. Another explanation may be the different consistency of the study population. About 60% of the DASH study population were African Americans with a known higher prevalence of hy-pertension (about 40%) than Caucasians. The conclusion is that even convincing results of a controlled trial cannot be simply transferred into dietary advice for the general public. For addressing food-based dietary guidelines to reduce the risk of hypertension it is necessary to consider the genetic background as well as the dietary and the lifestyle situation of the target population carefully.

  12. The direct-to-indirect band gap crossover in two-dimensional van der Waals Indium Selenide crystals

    PubMed Central

    Mudd, G. W.; Molas, M. R.; Chen, X.; Zólyomi, V.; Nogajewski, K.; Kudrynskyi, Z. R.; Kovalyuk, Z. D.; Yusa, G.; Makarovsky, O.; Eaves, L.; Potemski, M.; Fal’ko, V. I.; Patanè, A.

    2016-01-01

    The electronic band structure of van der Waals (vdW) layered crystals has properties that depend on the composition, thickness and stacking of the component layers. Here we use density functional theory and high field magneto-optics to investigate the metal chalcogenide InSe, a recent addition to the family of vdW layered crystals, which transforms from a direct to an indirect band gap semiconductor as the number of layers is reduced. We investigate this direct-to-indirect bandgap crossover, demonstrate a highly tuneable optical response from the near infrared to the visible spectrum with decreasing layer thickness down to 2 layers, and report quantum dot-like optical emissions distributed over a wide range of energy. Our analysis also indicates that electron and exciton effective masses are weakly dependent on the layer thickness and are significantly smaller than in other vdW crystals. These properties are unprecedented within the large family of vdW crystals and demonstrate the potential of InSe for electronic and photonic technologies. PMID:28008964

  13. The direct-to-indirect band gap crossover in two-dimensional van der Waals Indium Selenide crystals.

    PubMed

    Mudd, G W; Molas, M R; Chen, X; Zólyomi, V; Nogajewski, K; Kudrynskyi, Z R; Kovalyuk, Z D; Yusa, G; Makarovsky, O; Eaves, L; Potemski, M; Fal'ko, V I; Patanè, A

    2016-12-23

    The electronic band structure of van der Waals (vdW) layered crystals has properties that depend on the composition, thickness and stacking of the component layers. Here we use density functional theory and high field magneto-optics to investigate the metal chalcogenide InSe, a recent addition to the family of vdW layered crystals, which transforms from a direct to an indirect band gap semiconductor as the number of layers is reduced. We investigate this direct-to-indirect bandgap crossover, demonstrate a highly tuneable optical response from the near infrared to the visible spectrum with decreasing layer thickness down to 2 layers, and report quantum dot-like optical emissions distributed over a wide range of energy. Our analysis also indicates that electron and exciton effective masses are weakly dependent on the layer thickness and are significantly smaller than in other vdW crystals. These properties are unprecedented within the large family of vdW crystals and demonstrate the potential of InSe for electronic and photonic technologies.

  14. Windkraftanlagen

    NASA Astrophysics Data System (ADS)

    Surek, Dominik

    Windturbinenanlagen nutzen die kinetische Energie des Windes bei Geschwindigkeiten von c=4 m/s bis 25 m/s in Nabenhöhe des Windrades zur Stromerzeugung. Die oben genannten Windgeschwindigkeiten liegen im Grenzschichtbereich der ebenen Strömung (Abb. 67.1), die bei Höhen von h=100 m bis 1000 m liegen und in Großstädten mit Skylines bis 2000 m. Die größten Windturbinentürme erreichen gegenwärtig Nabenhöhen von h=160 m und Windraddurchmesser von d=130 m, d. h. mit Flügellängen von L=65 m. Die Windturbinen werden vorrangig mit 3 Schaufeln ausgeführt. Windturbinen mit einer und zwei Schaufeln waren Versuchsgeräte. Die Drehzahl von Windturbinen für Leistungen von P_{T}=2 MW betragen n=12 bis 20 min{}^{-1}. Das Windrad entzieht dem Wind mit der Anströmgeschwindigkeit c 1 nach Betz die Geschwindigkeitsdifferenz c2=(2/3) c1. Der Rest der Windgeschwindigkeit wird für die Abströmung des Windes im Leebereich c3=c1/3 benötigt. Durch den Entzug der Geschwindigkeit im Laufrad bläht sich der Abströmdurchmesser auf d3> d1 auf, der bei der Installation von Windturbinen zu beachten ist (Abb. 67.2) [Gasch und Twele(2013)]. Um die Windturbinen bei starkem Wind von c {}1> 25 m/s zu schützen, werden die Laufschaufeln durch Pitch- oder Stall-Anlagen aus dem Wind gedreht, so dass die Strömung an den Schaufeln abreißt und das Windrad in die Ruhestellung gelangt. Bei der Windgeschwindigkeit c1=25 m/s bis 34 m/s wird der Windrotor abgeschaltet. Die zulässige Maximalgeschwindigkeit liegt aus Festigkeitsgründen etwa bei . Die aktive Blattverdrehung (Pitchregelung) stellt eine Blattwinkelregelung dar, wobei die Profilnase in die Anströmung gedreht wird. Sie benötigen für die Drehzahlreduzierung keine mechanische Bremse.

  15. Untersuchung der Störwirkung von LTE auf SRD Anwendungen bei 868 MHz

    NASA Astrophysics Data System (ADS)

    Welpot, M.; Wunderlich, S.; Gaspard, I.

    2014-11-01

    Moderne Hausautomatisierungssysteme, Alarmanlagen oder auch Funk-Zugangssysteme in Haus und Automobil setzen auf frei nutzbare Frequenzen in ISM/SRD-Bändern. Die rasante Zunahme an privaten und kommerziell genutzten Applikationen im SRD-Band bei 868 MHz und der Ausbau der LTE-Mobilfunknetze im Frequenzbereich unterhalb von 1 GHz ("Digital Dividend") wirft zunehmend die Frage nach der Funkverträglichkeit dieser Systeme untereinander auf. Während die SRD-Funkmodule auf eine geringe Sendeleistung von ~ +14 dBm beschränkt sind (Ralf and Thomas, 2009), beträgt die maximale LTE-Sendeleistung im Uplink nach (ETSI-Norm, 2011) +23 dBm. Zusammen mit der Einführung von LTE im Frequenzbereich unterhalb 1 GHz als DSL-Ersatz vor allem in ländlichen Gebieten, ergibt sich damit als mögliches Störszenario, dass durch die Aussendung des LTE-Endgerätes im Bereich von ca. 850 MHz die SRD-Funkverbindungen bei 868 MHz insbesondere dann gestört werden, wenn die Antennen beider Funksysteme räumlich nahe zueinander angeordnet sind und folglich nur eine geringe zusätzliche Entkopplung der Systeme bieten. In der vorliegenden Arbeit wird das LTE-Störpotential auf SRD-Empfänger praxisnah untersucht.

  16. New experimental research stand SVICKA neutron field analysis using neutron activation detector technique

    NASA Astrophysics Data System (ADS)

    Varmuza, Jan; Katovsky, Karel; Zeman, Miroslav; Stastny, Ondrej; Haysak, Ivan; Holomb, Robert

    2018-04-01

    Knowledge of neutron energy spectra is very important because neutrons with various energies have a different material impact or a biological tissue impact. This paper presents basic results of the neutron flux distribution inside the new experimental research stand SVICKA which is located at Brno University of Technology in Brno, Czech Republic. The experiment also focused on the investigation of the sandwich biological shielding quality that protects staff against radiation effects. The set of indium activation detectors was used to the investigation of neutron flux distribution. The results of the measurement provide basic information about the neutron flux distribution inside all irradiation channels and no damage or cracks are present in the experimental research stand biological shielding.

  17. Tissue Engineering in der Hals-Nasen-Ohrenheilkunde, Kopf- und Halschirurgie

    NASA Astrophysics Data System (ADS)

    Bücheler, Markus; Bootz, Friedrich

    Tissue Engineering ist eine Schlüsseltechnologie für den Gewebeersatz der Zukunft. Am Beispiel der Hals-Nasen-Ohrenheilkunde, Kopf- und Halschirurgie werden klinisch etablierte Gewebeersatzmethoden und aktuelle Entwicklungen des Tissue Engineering gegenübergestellt. Die Besonderheiten der zu ersetzenden Gewebe im Kopf- und Halsbereich erfordert vielfältige Ersatzverfahren. Im klinischen Alltag werden heute vor allem autogene Transplantate und Implantate für den Gewebeersatz verwendet [1]. In vitro hergestellte Gewebe werden abgesehen von Einzelanwendungen zur Zeit noch nicht am Patienten eingesetzt.

  18. Himmelsfotografie MIT Schmidt-Teleskopen

    NASA Astrophysics Data System (ADS)

    Marx, Siegfried; Pfau, Werner

    Auf dem Höhepunkt der Verbreitung und astronomischen Anwendung von Schmidt-Teleskopen legen S. Marx und W. Pfau einen reich illustrierten Bildband zu diesem Fernrohrtyp vor. Der thematische Bogen reicht von der Teleskoptechnik und ihrer Geschichte über das Leben von Berhard Schmidt bis zu den schönsten, hier in hervorragender Qualität wiedergegebenen Himmelsaufnahmen und ihrer wissenschaftlichen Interpretation. Praktische Hinweise zu eigener fotografischer Tätigkeit und ein Glossar machen das Buch nützlich für jeden Liebhaber der Himmelskunde.

  19. Einführung

    NASA Astrophysics Data System (ADS)

    Wellenreuther, Günter; Zastrow, Dieter

    Reale Aufgaben der Automatisierungstechnik sind im Allgemeinen sehr komplex. Als umfassender Ausdruck für Steuerungs-, Regelungs- und Visualisierungs-Vorgänge hat sich der Begriff der Automatisierung durchgesetzt. Er beinhaltet, dass Automatisierungsgeräte selbsttätig Programme befolgen und dabei Entscheidungen auf Grund vorgegebener Führungsgrößen und rückgeführter Prozessgrößen aus der Anlage sowie erforderlicher Daten aus internen Speichern des Systems treffen, um daraus notwendige Ausgangsgrößen für den Betriebsprozess zu bilden.

  20. Anbindung des SISIS-SunRise-Bibliothekssystems an das zentrale Identitätsmanagement

    NASA Astrophysics Data System (ADS)

    Ebner, Ralf; Pretz, Edwin

    Wir berichten über Konzepte und Implementierungen zur Datenprovisionierung aus den Personenverwaltungssystemen der Technischen Universität München (TUM) über das zentrale Metadirectory am Leibniz-Rechenzentrum (LRZ) in das SISIS-SunRise-Bibliothekssystem der Universitätsbibliothek der TUM (TUB). Es werden drei Implementierungsvarianten diskutiert, angefangen von der Generierung und Übertragung einfacher CSV-Dateien über ein OpenLDAP-basiertes Konzept als Backend für die SISIS-Datenbank bis zur endgültigen Implementierung mit dem OCLC IDM Connector.

  1. Construction of a Der p2-transgenic plant for the alleviation of airway inflammation

    PubMed Central

    Lee, CC; Ho, H; Lee, KT; Jeng, ST; Chiang, BL

    2011-01-01

    In clinical therapy, the amount of antigen administered to achieve oral tolerance for allergic diseases is large, and the cost is a major consideration. In this study, we used tobacco plants to develop a large-scale protein production system for allergen-specific immunotherapy, and we investigated the mechanisms of oral tolerance induced by a transgenic plant-derived antigen. We used plants (tobacco leaves) transgenic for the Dermatophagoides pteronyssinus 2 (Der p2) antigen to produce Der p2. Mice received total protein extract from Der p2 orally once per day over 6 days (days 0–2 and days 6–8). Mice were also sensitized and challenged with yeast-derived recombinant Der p2 (rDer p2), after which the mice were examined for airway hyper-responsiveness and airway inflammation. After sensitization and challenge with rDer p2, mice that were fed with total protein extracted from transgenic plants showed decreases in serum Der p2-specific IgE and IgG1 titers, decreased IL-5 and eotaxin levels in bronchial alveolar lavage fluid, and eosinophil infiltration in the airway. In addition, hyper-responsiveness was also decreased in mice that were fed with total protein extracted from transgenic plants, and CD4+CD25+Foxp3+ regulatory T cells were significantly increased in mediastinal and mesenteric lymph nodes. Furthermore, splenocytes isolated from transgenic plant protein-fed mice exhibited decreased proliferation and increased IL-10 secretion after stimulation with rDer p2. The data here suggest that allergen-expressing transgenic plants could be used for therapeutic purposes for allergic diseases. PMID:21602845

  2. Direct regulatory immune activity of lactic acid bacteria on Der p 1-pulsed dendritic cells from allergic patients.

    PubMed

    Pochard, Pierre; Hammad, Hamida; Ratajczak, Céline; Charbonnier-Hatzfeld, Anne-Sophie; Just, Nicolas; Tonnel, André-Bernard; Pestel, Joël

    2005-07-01

    Lactic acid bacteria (LAB) are suggested to play a regulatory role in the development of allergic reactions. However, their potential effects on dendritic cells (DCs) directing the immune polarization remain unclear. The immunologic effect of Lactobacillus plantarum NCIMB 8826 (LAB1) on monocyte-derived dendritic cells (MD-DCs) from patients allergic to house dust mite was evaluated. MD-DCs were stimulated for 24 hours with the related allergen Der p 1 in the presence or absence of LAB1. Cell-surface markers were assessed by means of FACS analysis, and the key polarizing cytokines IL-12 and IL-10 were quantified. The subsequent regulatory effect of pulsed MD-DCs on naive or memory T cells was evaluated by determining the T-cell cytokine profile. LAB1 induced the maturation of MD-DCs, even if pulsed with Der p 1. Interestingly, after incubation with LAB1 and Der p 1, MD-DCs produced higher amounts of IL-12 than Der p 1-pulsed DCs. Indeed, the T H 2 cytokine (IL-4 and IL-5) production observed when naive or memory autologous T cells were cocultured with Der p 1-pulsed MD-DCs was highly reduced in the presence of LAB1. Finally, in contrast to naive or memory T cells exposed once to Der p 1-pulsed DCs, T cells stimulated by MD-DCs pulsed with Der p 1 and LAB1 failed to produce T H 2 cytokines in response to a new stimulation with Der p 1-pulsed DCs. Thus in the presence of LAB1, MD-DCs from allergic patients tend to reorientate the T-cell response toward a beneficial T H 1 profile.

  3. Prognostischer Wert der Fläche und Dichte von Lymphgefäßen bei kutanem Plattenepithelkarzinom.

    PubMed

    Krediet, Jorien Tannette; Kanitakis, Jean; Bob, Adrienne; Schmitter, Julia; Carine Krediet, Annelot; Röwert, Joachim; Stockfleth, Eggert; Painsi, Clemens; Hügel, Rainer; Terhorst, Dorothea; Lange-Asschenfeldt, Bernhard

    2016-11-01

    Kutane Plattenepithelkarzinome (SCC) sind bekannt für ihre Fähigkeit, über Lymphgefäße zu metastasieren. In neueren Studien wird das Ausmaß der Lymphangiogenese als möglicher prognostischer Faktor bei einigen Hauttumoren genannt. Ziel dieser Studie war die Quantifizierung der Lymphangiogenese bei SCC entweder durch computergestützte Bildanalyse oder mithilfe der Zählmethode nach Chalkley. Gefäßparameter wurden im Hinblick auf ihre Vorhersagekraft für die Bildung von Tumormetastasen beurteilt und verglichen. In dieser Fallkontrollstudie wurden die klinischen und histologischen Daten von jeweils 15 SCC-Patienten mit bzw. ohne Metastasen retrospektiv analysiert. In den SCC-Proben wurde der für das Lymphendothel spezifische Marker D2-40 und der pan-vaskuläre Marker CD31 immunhistochemisch angefärbt und durch computergestützte morphometrische Bildanalyse in Hotspots sowie mithilfe der digitalisierten Zählmethode nach Chalkley analysiert. Die Dichte von Lymphgefäßen, die relative Lymphgefäßfläche und die mit der Chalkley-Methode ermittelte Zahl an Lymphgefäßen (Chalkley-Count) waren bei metastasierten SCC signifikant erhöht. Die Tumordicke war bei metastasierten SCC signifikant höher und besaß die höchste Vorhersagekraft für eine Metastasierung. Die Tumordicke war ein signifikanter Prädiktor für Lymphangiogeneseparameter. Die Lymphangiogenese ist bei metastasierten SCC erhöht, doch ihr Ausmaß wird von der Tumordicke beeinflusst. Die Tumordicke bildet weiterhin den zuverlässigsten prädiktiven Faktor für die Metastasierung. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  4. The minor house dust mite allergen Der p 13 is a fatty acid-binding protein and an activator of a TLR2-mediated innate immune response.

    PubMed

    Satitsuksanoa, P; Kennedy, M; Gilis, D; Le Mignon, M; Suratannon, N; Soh, W T; Wongpiyabovorn, J; Chatchatee, P; Vangveravong, M; Rerkpattanapipat, T; Sangasapaviliya, A; Piboonpocanun, S; Nony, E; Ruxrungtham, K; Jacquet, A

    2016-10-01

    The house dust mite (HDM) allergen Der p 13 could be a lipid-binding protein able to activate key innate signaling pathways in the initiation of the allergic response. We investigated the IgE reactivity of recombinant Der p 13 (rDer p 13), its lipid-binding activities, and its capacity to stimulate airway epithelium cells. Purified rDer p 13 was characterized by mass spectrometry, circular dichroism, fluorescence-based lipid-binding assays, and in silico structural prediction. IgE-binding activity and allergenic potential of Der p 13 were examined by ELISA, basophil degranulation assays, and in vitro airway epithelial cell activation assays. Protein modeling and biophysical analysis indicated that Der p 13 adopts a β-barrel structure with a predominately apolar pocket representing a potential binding site for hydrophobic ligands. Fluorescent lipid-binding assays confirmed that the protein is highly selective for ligands and that it binds a fatty acid with a dissociation constant typical of lipid transporter proteins. The low IgE-binding frequency (7%, n = 224) in Thai HDM-allergic patients as well as the limited propensity to activate basophil degranulation classifies Der p 13 as a minor HDM allergen. Nevertheless, the protein with its presumptively associated lipid(s) triggered the production of IL-8 and GM-CSF in respiratory epithelial cells through a TLR2-, MyD88-, NF-kB-, and MAPK-dependent signaling pathway. Although a minor allergen, Der p 13 may, through its lipid-binding capacity, play a role in the initiation of the HDM-allergic response through TLR2 activation. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. Der p 1 suppresses indoleamine 2, 3-dioxygenase in dendritic cells from house dust mite-sensitive patients with asthma.

    PubMed

    Maneechotesuwan, Kittipong; Wamanuttajinda, Valla; Kasetsinsombat, Kanda; Huabprasert, Sukit; Yaikwawong, Metha; Barnes, Peter J; Wongkajornsilp, Adisak

    2009-01-01

    Indoleamine 2, 3-dioxygenase (IDO), a tryptophan-degrading enzyme in dendritic cells (DCs), mediates an immunosuppressive effect on activated T lymphocytes. However, little is known about the effect of Der p 1 on IDO in human DCs. The aim was to investigate the effect of Der p 1 on the expression and activity of IDO in monocyte-derived DCs from house dust mite (HDM)-sensitive patients with asthma. Using real-time RT-PCR and HPLC, the expression and activity of IDO were assessed in TNF-alpha-induced mature DCs from HDM-sensitive and nonatopic patients with asthma in response to Der p 1 exposure ex vivo. We also monitored the alteration of IDO activity in Der p 1-pulsed DCs after the coincubation with autologous T cells. With a reliance on its protease activity, Der p 1 suppressed functional IDO in DCs from HDM-sensitive patients with asthma but enhanced IDO activity in DCs from nonatopic patients with asthma. This suppression was maintained by the reciprocally induced IL-4 from the coculturing autologous HDM-sensitive T cells. Conversely, the upregulation of IDO activity in Der p 1-pulsed DCs was maintained by IFN-gamma released from autologous nonatopic T cells and the regulatory T-cell subset. Der p 1 pulsation to sensitive DCs failed to raise regulatory T cells but raised progenitor fractions from cloned HDM-sensitive CD4(+) cells through direct contact and soluble mediators. House dust mite-sensitive DCs exposed to Der p 1 downregulated IDO activity and tipped the T(H)1/T(H)2 cytokine balance toward IL-4, resulting in sustainable IDO suppression.

  6. Entwicklung von umwelt- und naturschutzgerechten Verfahren der landwirtschaftlichen Landnutzung für das Biosphärenreservat Schorfheide-Chorin

    NASA Astrophysics Data System (ADS)

    Meyer-Aurich, Andreas

    1999-11-01

    Mit der vorliegenden Arbeit werden exemplarisch Chancen und Grenzen der Integration von Umwelt- und Naturschutz in Verfahren der ackerbaulichen Landnutzung aufgezeigt. Die Umsetzung von Zielen des Umwelt- und Naturschutzes in Verfahren der Landnutzung ist mit verschiedenen Schwierigkeiten verbunden. Diese liegen zum einen in der Konkretisierung der Ziele, um diese umsetzen zu können, zum anderen in vielfach unzulänglichem Wissen über den Zusammenhang zwischen unterschiedlichen Formen der Landnutzung und insbesondere den biotischen Naturschutzzielen. Zunächst wird die Problematik der Zielfestlegung und Konkretisierung erörtert. Das Umweltqualitätszielkonzept von Fürst et al. (1992) stellt einen Versuch dar, Ziele des Umwelt- und Naturschutzes zu konkretisieren. Dieses Konzept haben Heidt et al. (1997) auf einen Landschaftsausschnitt von ca. 6000 ha im Biosphärenreservat Schorfheide-Chorin im Nordosten Brandenburgs angewendet. Eine Auswahl der von Heidt et al. (1997) formulierten Umweltqualitätsziele bildet die Basis dieser Arbeit. Für die ausgewählten Umweltqualitätsziele wurden wesentliche Einflussfaktoren der Landnutzung identifiziert und ein Bewertungssystem entwickelt, mit dem die Auswirkungen von landwirtschaftlichen Anbauverfahren auf diese Umweltqualitätsziele abgebildet werden können. Die praktizierte Landnutzung von 20 Betrieben im Biosphärenreservat Schorfheide-Chorin wurde von 1994 bis 1997 hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele analysiert. Die Analyse ergab ein sehr differenziertes Bild, das zum Teil Unterschiede in der Auswirkung auf die Umweltqualitätsziele für den Anbau einzelner Kulturen oder für bestimmte Betriebstypen zeigte. Es zeigte sich aber auch, dass es bei der Gestaltung des Anbaus einzelner Kulturarten große Unterschiede gab, die für Umweltqualitätsziele Bedeutung haben. Neben der Analyse der Landnutzung im Biosphärenreservat Schorfheide-Chorin wurde ein System entwickelt, mit dem die modellhafte Abbildung von Verfahren der Landnutzung möglich ist. Die Modellverfahren wurden in eine umfangreiche Datenbank eingebunden. Sie wurden mit Hilfe eines Fuzzy- Regelsystems hinsichtlich ihrer Auswirkungen auf die Umweltqualitätsziele bewertet. Die systematisch bewerteten Verfahren wurden in ein Betriebsmodell integriert, womit eine weitergehende Analyse der Zielbeziehungen und die Berechnung von Szenarien mit unterschiedlichen Rahmenbedingungen ermöglicht wurde. Die Analyse der Beziehung verschiedener Ziele zueinander (Zieldivergenz, Zielkonvergenz) zeigte, dass sich mit der Verfolgung vieler Umweltqualitätsziele auch positive Effekte für andere Umweltqualitätsziele ergaben. Teilweise konnte allerdings auch eine Zieldivergenz festgestellt werden, die auf mögliche Zielkonflikte hinweist. Bei der Analyse der Szenarienergebnisse zeigte sich, dass die vorgeschlagenen Veränderungen von Rahmenbedingungen vielfach eine Verschlechterung für verschiedene Umweltqualitätsziele mit sich bringen. Eine Ursache dafür liegt darin, dass bei der Definition der Szenarien die Bedeutung der Stilllegungen unterschätzt wurde. The objective of this research was to show the opportunities and limitations associated with integrating of environmental goals into agricultural land use management. For this purpose, the impact of agricultural land uses on six environmental quality goals was analysed for an approximately 16.000 ha study region within the biosphere reserve Schorfheide-Chorin in north-eastern Brandenburg (Germany). The environmental quality goals considered were protection of ground water, preservation of groundwater recharge, protection of the soil against wind and water erosion and preservation of animal species typical of the agricultural landscape, in particular partridge, amphibians and cranes. For each environmental quality goal, an evaluation framework is presented which enables an assessment of the impact of agricultural land uses on the environmental quality goals. The evaluation framework was applied to assess the impact of land uses of twenty farms in the study area from 1994 to 1997. It was demonstrated that the impact of agricultural land uses on the environmental quality of the region is very complex, and - although some crops did significantly impact certain aspects, one factor did not overwhelmingly contribute to the overall environmental quality. The evaluation framework was integrated further into a system of modelled cropping practices for optimisation calculations. For this purpose, a model framework was established based on a MS Access database. In the database, cropping practices for 17 crops are stored. Inputs and yields are adapted to the site-specific yield potential. In addition to the cropping practices, the model framework is comprised of an evaluation module and optimisation module. Hence, the impact of the cropping practices can be assessed for each site. This model framework provides the basis for optimisation calculations to forecast various land uses under different conditions. A step-wise integration of the environmental quality goals into the optimisation algorithm of a model farm allows for showing trade-offs between economic and ecological goals. The results of the trade-offs show that an improvement of ecological goal achievement is possible with little impact on the gross margin, as long as the improvement is less than 30% of the starting situation. If improvements greater than 30% are desired, very high losses of gross margin must be taken into consideration. Another result of the calculations shows that high achievements of environmental quality goals often correlate with the percentage of set-aside land within the total area.

  7. [Experimental study on the Der f 1 mRNA molecules derived from dermatophagoides farinae for specific immunotherapy on murine model of asthma].

    PubMed

    Jiang, Yu-xin; Yin, Kang; Jin, Wen-jie; Wu, Lu-yi; Li, Chao-pin

    2014-08-01

    To investigate the effect of Der f 1 mRNA molecules for specific immunotherapy on murine model of asthma. Fifty BALB/c mice were randomly divided into 5 groups: PBS group, Der f 1 sensitization group, Der f 1 specific immunotherapy (SIT) group, beta-actin mRNA SIT group, and Derf 1 mRNA SIT group. On days 0, 7 and 14, mice in PBS group received PBS injection; mice in the other groups were intraperitoneally injected with 10 microg Derf 1. At day 21, the mice in the 4 experimental groups were challenged with a 30-min inhaled dose of Der f 1 (100 microg/ml) for 7 successive days. Two weeks after the final sensitization, the mice in the above five groups were im- munized by intradermal injection with PBS, 1 microg Der f 1, 10 microg Der f 1, 2 microg beta-actin mRNA, and 2 microg Der f 1 mRNA, respectively for 3 times at one-week intervals. Two weeks after the last intradermal injection, all mice were sacrificed and bronchoalveolar lavage fluid (BALF) was collected. ELISA was performed to detect the levels of IFN-gamma and IL-13 in BALF, the number of eosinophils in the BALF was recorded. Splenocytes were prepared, and cultured with Der f 1 al- lergen (10 Jg/ml) for 72 h. Splenocytes of PBS group was cultured without Derf 1 allergen. The levels of IFN-gamma and IL-13 in splenocyte culture supernatant were measured by ELISA, as well as serum antibody levels of total IgE, allergen- specific IgE (sIgE), sIgG1, and sIgG2a. Lung sections were stained in hematoxylin and eosin, and observed under the microsope. Except for PBS group, mice in the other 4 group showed symptoms of acute asthma attack. Com- pared with Derf 1 sensitization group [(897.56 +/- 105.73) pg/ml] and beta-actin mRNA SIT group [(219.47 +/- 64.72) pg/ml], the level of IFN-gamma in BALF from Der f 1 mRNA SIT group [(897.56 +/- 105.73) pg/ml] and Derfl SIT group [(864.48 +/- 70.62)pg/ml] significantly increased (P<0.01). However, the level of IL-13 in BALF from Derf 1 mRNA SIT group [(241.64 +/- 31.41) pg/ml] and Derf 1 SIT group [(321.94 +/- 41.07)pg/ml] was significantly lower than that of Der f 1 sensitization group [(520.62 +/- 43.77) pg/ml] and beta-actin mRNA SIT group [(507.22 +/- 42.26) pg/ml](P<0.01). The number of eosinophils in Der f 1 mRNA SIT group [(1.33 +/- 0.44) x 10(5)/ml] and Der f 1 SIT group [(1.48 +/- 0.39) x 10(5)/ml] was also lower than that of Der f 1 sensitization group [(3.54 +/- 0.52)x10(5)/ml] and beta-actin mRNA SIT group [(2.98-0.53) x 10(5)/ml] (P<0.01). The levels of IFN-GAMMA and IL-13 in splenocyte culture supernatant showed that IFN-gamma level in Der f 1 mRNA SIT group [(420.91+69.92) pg/ml] and Der f 1 SIT group [(334.92 +/- 43.72) pg/ml] was significantly higher than that of Der f 1 sensitization group[(123.75 +/- 5.48) pg/ml] and beta-actin mRNA SIT group[(128.84 +/- 59.00) pg/ml] (P<0.01). However, IL-13 level of Der f 1 mRNA SIT group [(268.51 +/- 40.42) pg/ml] and Der f 1 SIT group [(285.26 +/- 62.21) pg/ml] was significantly lower than that of Derf 1 sensitization group [(613.89 +/- 51.54) pg/ml] and beta-actin mRNA SIT group [(524.05 +/- 39.12) pg/ml] (P<0.01). Compared with Der f 1 sensitization group [total IgE: (94.34 +/- 11.66) ng/ml, sIgE: (65.67 +/- 9.47) ng/ml, sIgG1: (75.18 +/- 9.52) ng/ml, sIgG2a: (2.81 +/- 1.17) ng/ml] and beta-actin mRNA SIT group[total IgE: (86.48 +/- 10.26) ng/ml, sIgE: (62.36 +/- 8.35) ng/ml, sIgG1: (69.51 +/- 8.98) ng/ml, IgG2a: (1.06 +/- 0.11) ng/ml], the serum antibody levels of total IgE [(33.72 +/- 9.78) ng/ml], sIgE [(22.76 +/- 8.09) ng/ml], sIgG1 [(17.87 +/- 7.59) ng/ml] of Der f 1 mRNA SIT group decreased significantly (P<0.01), whereas the level of IgG% [(7.74 +/- 0.88) ng/ml] increased (P<0.01). Compared with Der f 1 sensitization group, the asthmatic symptoms were relieved after immunization with Der f 1 mRNA for specific immunotherapy, including intact structure of respiratory and alveolar epithelial cells, decreased inflammatory cell infiltration, and similar to those in Der f 1 SIT group. However, the breakage and detachment of bronchial epithelial cells occurred in beta-actin mRNA SIT group. Derf 1 mRNA vaccine can correct Th1 and Th2 imbalance.

  8. Layer-dependent ferromagnetism in a van der Waals crystal down to the monolayer limit.

    PubMed

    Huang, Bevin; Clark, Genevieve; Navarro-Moratalla, Efrén; Klein, Dahlia R; Cheng, Ran; Seyler, Kyle L; Zhong, Ding; Schmidgall, Emma; McGuire, Michael A; Cobden, David H; Yao, Wang; Xiao, Di; Jarillo-Herrero, Pablo; Xu, Xiaodong

    2017-06-07

    Since the discovery of graphene, the family of two-dimensional materials has grown, displaying a broad range of electronic properties. Recent additions include semiconductors with spin-valley coupling, Ising superconductors that can be tuned into a quantum metal, possible Mott insulators with tunable charge-density waves, and topological semimetals with edge transport. However, no two-dimensional crystal with intrinsic magnetism has yet been discovered; such a crystal would be useful in many technologies from sensing to data storage. Theoretically, magnetic order is prohibited in the two-dimensional isotropic Heisenberg model at finite temperatures by the Mermin-Wagner theorem. Magnetic anisotropy removes this restriction, however, and enables, for instance, the occurrence of two-dimensional Ising ferromagnetism. Here we use magneto-optical Kerr effect microscopy to demonstrate that monolayer chromium triiodide (CrI 3 ) is an Ising ferromagnet with out-of-plane spin orientation. Its Curie temperature of 45 kelvin is only slightly lower than that of the bulk crystal, 61 kelvin, which is consistent with a weak interlayer coupling. Moreover, our studies suggest a layer-dependent magnetic phase, highlighting thickness-dependent physical properties typical of van der Waals crystals. Remarkably, bilayer CrI 3 displays suppressed magnetization with a metamagnetic effect, whereas in trilayer CrI 3 the interlayer ferromagnetism observed in the bulk crystal is restored. This work creates opportunities for studying magnetism by harnessing the unusual features of atomically thin materials, such as electrical control for realizing magnetoelectronics, and van der Waals engineering to produce interface phenomena.

  9. Data Mining for New Two- and One-Dimensional Weakly Bonded Solids and Lattice-Commensurate Heterostructures.

    PubMed

    Cheon, Gowoon; Duerloo, Karel-Alexander N; Sendek, Austin D; Porter, Chase; Chen, Yuan; Reed, Evan J

    2017-03-08

    Layered materials held together by weak interactions including van der Waals forces, such as graphite, have attracted interest for both technological applications and fundamental physics in their layered form and as an isolated single-layer. Only a few dozen single-layer van der Waals solids have been subject to considerable research focus, although there are likely to be many more that could have superior properties. To identify a broad spectrum of layered materials, we present a novel data mining algorithm that determines the dimensionality of weakly bonded subcomponents based on the atomic positions of bulk, three-dimensional crystal structures. By applying this algorithm to the Materials Project database of over 50,000 inorganic crystals, we identify 1173 two-dimensional layered materials and 487 materials that consist of weakly bonded one-dimensional molecular chains. This is an order of magnitude increase in the number of identified materials with most materials not known as two- or one-dimensional materials. Moreover, we discover 98 weakly bonded heterostructures of two-dimensional and one-dimensional subcomponents that are found within bulk materials, opening new possibilities for much-studied assembly of van der Waals heterostructures. Chemical families of materials, band gaps, and point groups for the materials identified in this work are presented. Point group and piezoelectricity in layered materials are also evaluated in single-layer forms. Three hundred and twenty-five of these materials are expected to have piezoelectric monolayers with a variety of forms of the piezoelectric tensor. This work significantly extends the scope of potential low-dimensional weakly bonded solids to be investigated.

  10. Layer-dependent ferromagnetism in a van der Waals crystal down to the monolayer limit

    DOE PAGES

    Huang, Bevin; Clark, Genevieve; Navarro-Moratalla, Efrén; ...

    2017-06-07

    Since the celebrated discovery of graphene, the family of two-dimensional (2D) materials has grown to encompass a broad range of electronic properties. Recent additions include spin-valley coupled semiconductors, Ising superconductors that can be tuned into a quantum metal, possible Mott insulators with tunable charge-density waves, and topological semi-metals with edge transport. Despite this progress, there is still no 2D crystal with intrinsic magnetism, which would be useful for many technologies such as sensing, information, and data storage. Theoretically, magnetic order is prohibited in the 2D isotropic Heisenberg model at finite temperatures by the Mermin-Wagner theorem. However, magnetic anisotropy removes thismore » restriction and enables, for instance, the occurrence of 2D Ising ferromagnetism. Here, we use magneto-optical Kerr effect (MOKE) microscopy to demonstrate that monolayer chromium triiodide (CrI 3) is an Ising ferromagnet with out-of-plane spin orientation. Its Curie temperature of 45 K is only slightly lower than the 61 K of the bulk crystal, consistent with a weak interlayer coupling. Moreover, our studies suggest a layer-dependent magnetic phases, showcasing the hallmark thickness dependent physical properties typical of van der Waals crystals. Remarkably, bilayer CrI3 displays suppressed magnetization with a metamagnetic effect, while in trilayer the interlayer ferromagnetism observed in the bulk crystal is restored. Our work creates opportunities for studying magnetism by harnessing the unique features of atomically-thin materials, such as electrical control for realizing magnetoelectronics, and van der Waals engineering for novel interface phenomena.« less

  11. Layer-dependent ferromagnetism in a van der Waals crystal down to the monolayer limit

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Huang, Bevin; Clark, Genevieve; Navarro-Moratalla, Efrén

    Since the celebrated discovery of graphene, the family of two-dimensional (2D) materials has grown to encompass a broad range of electronic properties. Recent additions include spin-valley coupled semiconductors, Ising superconductors that can be tuned into a quantum metal, possible Mott insulators with tunable charge-density waves, and topological semi-metals with edge transport. Despite this progress, there is still no 2D crystal with intrinsic magnetism, which would be useful for many technologies such as sensing, information, and data storage. Theoretically, magnetic order is prohibited in the 2D isotropic Heisenberg model at finite temperatures by the Mermin-Wagner theorem. However, magnetic anisotropy removes thismore » restriction and enables, for instance, the occurrence of 2D Ising ferromagnetism. Here, we use magneto-optical Kerr effect (MOKE) microscopy to demonstrate that monolayer chromium triiodide (CrI 3) is an Ising ferromagnet with out-of-plane spin orientation. Its Curie temperature of 45 K is only slightly lower than the 61 K of the bulk crystal, consistent with a weak interlayer coupling. Moreover, our studies suggest a layer-dependent magnetic phases, showcasing the hallmark thickness dependent physical properties typical of van der Waals crystals. Remarkably, bilayer CrI3 displays suppressed magnetization with a metamagnetic effect, while in trilayer the interlayer ferromagnetism observed in the bulk crystal is restored. Our work creates opportunities for studying magnetism by harnessing the unique features of atomically-thin materials, such as electrical control for realizing magnetoelectronics, and van der Waals engineering for novel interface phenomena.« less

  12. Turbulenzübergang in der Rohrströmung: Die Lösung eines alten Rätsels

    NASA Astrophysics Data System (ADS)

    Eckhardt, Bruno; Hof, Björn; Faisst, Holger

    2006-09-01

    Die Strömung von Flüssigkeiten und Gasen durch eine Röhre kann zwei Zustände annehmen. Einer ist laminar, also gleichmäßig geordnet, einer ist zeitlich-räumlich verwirbelt und turbulent. Mit dem Übergang zur Turbulenz nimmt der Strömungswiderstand drastisch zu. Vor etwa 120 Jahren beschrieb Osborne Reynolds bereits das Verhalten der Rohrströmung sehr genau. Er beobachtete, dass der Turbulenzübergang sehr empfindlich von äußeren Störungen abhängt, was bislang rätselhaft blieb. Dieses Rätsel konnte nun mit einer Kombination aus Computerstudien, Konzepten aus der nichtlinearen Dynamik und speziell entwickelten Experimenten gelöst werden.

  13. Optimizing DER Participation in Inertial and Primary-Frequency Response

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dall-Anese, Emiliano; Zhao, Changhong; Guggilam, Swaroop

    This paper develops an approach to enable the optimal participation of distributed energy resources (DERs) in inertial and primary-frequency response alongside conventional synchronous generators. Leveraging a reduced-order model description of frequency dynamics, DERs' synthetic inertias and droop coefficients are designed to meet time-domain performance objectives of frequency overshoot and steady-state regulation. Furthermore, an optimization-based method centered around classical economic dispatch is developed to ensure that DERs share the power injections for inertial- and primary-frequency response in proportion to their power ratings. Simulations for a modified New England test-case system composed of ten synchronous generators and six instances of the IEEEmore » 37-node test feeder with frequency-responsive DERs validate the design strategy.« less

  14. Stereoskopische Visualisierung einer Infektion mammalischer Zellen durch pathogene Bakterien

    NASA Astrophysics Data System (ADS)

    Granseier, Michael; Grassmé, Heike; Gulbins, Erich; Lipinski, Hans-Gerd

    Die Infektion mammalischer Zellen durch pathogene Bakterien ist biologisch immer noch nicht sicher geklärt. Mit Hilfe der Laserscanmikroskopie ist es mittlerweile aber möglich, räumliche Bilddaten von Zellproben zu erstellen, auf denen der Eindringvorgang der Bakterien in das Zellinnere durch verschieden leuchtende Fluoreszenzfarbstoffe visualisiert werden kann. Unter Verwendung bekannter und adaptierter 3D-Rekonstruktionsalgorithmen werden dreidimensionale Visualisierungen von Mikroskopiebildern vorgestellt, mit deren Hilfe die Analyse des Infektionsprozesses erleichtert wird. Dabei hat sich gezeigt, dass mit Oberflächenrekonstruktionsverfahren die Topografie der Zelloberfiäche korrekt dargestellt werden kann, während die Darstellung der Farbstoffverteilungen besser durch ein Texture-Mapping-Verfahren gelingt. Die Rekonstruktionen konnten insbesondere durch den Einsatz von stereoskopischen Visualisierungstechniken detailgenau analysiert werden.

  15. Schreibende Messgeräte

    NASA Astrophysics Data System (ADS)

    Plaßmann, Wilfried

    Die schreibenden Messgeräte werden hauptsächlich eingesetzt, um Vorgänge aufzuzeichnen und zu dokumentieren, die sich im Minuten- und Stunden-Bereich abspielen. Sie sind weitgehend durch Oszilloskope oder elektronische Geräte ähnlich einem Oszilloskop ersetzt worden, die entsprechend für Langzeitaufnahmen ausgelegt sind. Der Vorteil dieser Geräte gegenüber den schreibenden Messgeräten ist der, dass die Daten dauerhaft gespeichert sind, einschließlich der notwendigen Kenngrößen wie Zeitmaßstab, Amplitude, Datum, Aufzeichnungsgerät usw., und sich in dieser Form beliebig oft ausdrucken und vor allem direkt weiterverarbeiten lassen. Weiterhin entfallen die Probleme mit der Mechanik, dem Papier und den Schreibstiften. Deshalb folgt hier eine nur kurze Darstellung der Geräte.

  16. Der Organismus der Mathematik - mikro-, makro- und mesoskopisch betrachtet

    NASA Astrophysics Data System (ADS)

    Winkler, Reinhard

    Meist enden ähnliche Gespräche über Mathematik etwa an diesem Punkt, ohne dass der Nichtmathematiker von der Sinnhaftigkeit mathematischer Forschung, ja mathematischer Tätigkeit generell überzeugt werden konnte. Ich glaube nicht, dass dem Laien Blindheit für die Großartigkeit unserer Wissenschaft vorzuwerfen ist, wenn hier keine befriedigendere Kommunikation zustande kommt. Ich sehe als Ursache eher ein stark verkürztes Bild von der Mathematik, welches auch Fachleute oft zeichnen, weil ihnen eine angemessenere Darstellung ihres Faches zu viel Mühe macht - und das obwohl Mathematik nur betreiben kann, wer geistige Mühen sonst keineswegs scheut. Ich will versuchen, den Ursachen dieses eigentümlichen Phänomens auf den Grund zu gehen.

  17. Dürre, Waldbrände, gravitative Massenbewegungen und andere klimarelevante Naturgefahren

    NASA Astrophysics Data System (ADS)

    Glade, Thomas; Hoffmann, Peter; Thonicke, Kirsten

    Klimarelevante Naturgefahren sind auf vielfältige Faktoren zurückzuführen, deren Zusammenwirken in der Gesamtheit betrachtet werden muss. Die vorbereitenden, auslösenden und kontrollierenden Faktoren werden in unterschiedlichster Weise vom Klimawandel beeinflusst. Die Autoren beschreiben beobachtete Trends und Projektionen zu Dürre, Waldbränden, gravitativen Massenbewegungen (Muren, Fels- und Bergstürze, Hangrutschungen) und Schneelawinen sowie das Zusammenspiel der unterschiedlichen Ursachen. Sie diskutieren darüber hinaus, welche der Veränderungen in der Häufigkeit oder Stärke von Naturgefahren tatsächlich ausschließlich dem Klimawandel zuzuschreiben sein könnten und welche Anteile hierbei der direkte menschliche Einfluss hat und konstatieren, dass eine eindeutige Trennung häufig nicht vollzogen werden kann.

  18. Victor F. Weisskopf (1908 - 2002): Physikgeschichte

    NASA Astrophysics Data System (ADS)

    Jacobi, Manfred

    2002-11-01

    Universal gebildete und interessierte Menschen sind selten geworden in unserer Zeit. Victor F. Weisskopf war einer von ihnen. Sein geistiger Horizont umfasste nicht nur sein eigentliches Fachgebiet, die Physik, wo er sich durch fundamentale Arbeiten in den Bereichen der Quantenfeldtheorie, der Kern- und Elementarteilchenphysik hervortat. Daneben bildeten Kunst und Musik sowie ein außergewöhnliches Engagement in sozialen und politischen Angelegenheiten die Eckpunkte seines Lebens. Der Einsatz für die Verständigung zwischen den Machtblöcken während des Kalten Krieges war für ihn ebenso selbstverständlich wie das Bedürfnis, die neuen Ideen der Physik einem breiten Publikum nahe zu bringen. Die Wissenschaft erschien ihm als das geeignete Mittel, um zum Wohle der Menschheit zu wirken.

  19. Genetics Home Reference: van der Woude syndrome

    MedlinePlus

    ... What is the prognosis of a genetic condition? Genetic and Rare Diseases Information Center Frequency Van der Woude syndrome is believed to occur in 1 in 35,000 to 1 in 100,000 people, based on data from Europe and Asia. Van der Woude syndrome ...

  20. A New Method for Suppressing Periodic Narrowband Interference Based on the Chaotic van der Pol Oscillator

    NASA Astrophysics Data System (ADS)

    Lu, Jia; Zhang, Xiaoxing; Xiong, Hao

    The chaotic van der Pol oscillator is a powerful tool for detecting defects in electric systems by using online partial discharge (PD) monitoring. This paper focuses on realizing weak PD signal detection in the strong periodic narrowband interference by using high sensitivity to the periodic narrowband interference signals and immunity to white noise and PD signals of chaotic systems. A new approach to removing the periodic narrowband interference by using a van der Pol chaotic oscillator is described by analyzing the motion characteristic of the chaotic oscillator on the basis of the van der Pol equation. Furthermore, the Floquet index for measuring the amplitude of periodic narrowband signals is redefined. The denoising signal processed by the chaotic van der Pol oscillators is further processed by wavelet analysis. Finally, the denoising results verify that the periodic narrowband and white noise interference can be removed efficiently by combining the theory of the chaotic van der Pol oscillator and wavelet analysis.

  1. Van der Waals interaction in uniaxial anisotropic media.

    PubMed

    Kornilovitch, Pavel E

    2013-01-23

    Van der Waals interactions between flat surfaces in uniaxial anisotropic media are investigated in the nonretarded limit. The main focus is the effect of nonzero tilt between the optical axis and the surface normal on the strength of the van der Waals attraction. General expressions for the van der Waals free energy are derived using the surface mode method and the transfer-matrix formalism. To facilitate numerical calculations a temperature-dependent three-band parameterization of the dielectric tensor of the liquid crystal 5CB is developed. A solid slab immersed in a liquid crystal experiences a van der Waals torque that aligns the surface normal relative to the optical axis of the medium. The preferred orientation is different for different materials. Two solid slabs in close proximity experience a van der Waals attraction that is strongest for homeotropic alignment of the intervening liquid crystal for all the materials studied. The results have implications for the stability of plate-like colloids in liquid crystal hosts.

  2. Phasenübergänge

    NASA Astrophysics Data System (ADS)

    Heintze, Joachim

    Bisher haben wir nur das thermische Verhalten von Stoffen einheitlicher Konsistenz diskutiert. Eines der auffälligsten Phänomene in der Physik der Wärme ist aber, dass ein Stoff in verschiedenen Aggregatzuständen vorliegen kann: fest, flüssig oder gasförmig, und dass durch Wärmezufuhr und -abfuhr Übergänge zwischen diesen verschiedenen Phasen bewirkt werden. Zunächst werden wir die Phasenübergänge flüssig-gasförmig und fest-gasförmig ausführlich diskutieren. Dann zeigen wir, dass der Phasenübergang fest-flüssig auf ganz ähnliche Weise beschrieben werden kann. Eine zusammenfassende Darstellung der Phasenübergänge ist in der Form von Zustandsdiagrammen möglich. Die Untersuchung solcher Diagramme führt auf das interessante Phänomen des kritischen Punktes. Am Schluss des Kapitels betrachten wir Phasenübergänge in Zweistoffsystemen. Sie weisen einige Eigenschaften auf, die nicht nur merkwürdig und physikalisch interessant, sondern vor allem auch technisch von Bedeutung sind.

  3. Data-driven planning of distributed energy resources amidst socio-technical complexities

    NASA Astrophysics Data System (ADS)

    Jain, Rishee K.; Qin, Junjie; Rajagopal, Ram

    2017-08-01

    New distributed energy resources (DER) are rapidly replacing centralized power generation due to their environmental, economic and resiliency benefits. Previous analyses of DER systems have been limited in their ability to account for socio-technical complexities, such as intermittent supply, heterogeneous demand and balance-of-system cost dynamics. Here we develop ReMatch, an interdisciplinary modelling framework, spanning engineering, consumer behaviour and data science, and apply it to 10,000 consumers in California, USA. Our results show that deploying DER would yield nearly a 50% reduction in the levelized cost of electricity (LCOE) over the status quo even after accounting for socio-technical complexities. We abstract a detailed matching of consumers to DER infrastructure from our results and discuss how this matching can facilitate the development of smart and targeted renewable energy policies, programmes and incentives. Our findings point to the large-scale economic and technical feasibility of DER and underscore the pertinent role DER can play in achieving sustainable energy goals.

  4. Optimal planning and design of a renewable energy based supply system for microgrids

    DOE PAGES

    Hafez, Omar; Bhattacharya, Kankar

    2012-03-03

    This paper presents a technique for optimal planning and design of hybrid renewable energy systems for microgrid applications. The Distributed Energy Resources Customer Adoption Model (DER-CAM) is used to determine the optimal size and type of distributed energy resources (DERs) and their operating schedules for a sample utility distribution system. Using the DER-CAM results, an evaluation is performed to evaluate the electrical performance of the distribution circuit if the DERs selected by the DER-CAM optimization analyses are incorporated. Results of analyses regarding the economic benefits of utilizing the optimal locations identified for the selected DER within the system are alsomore » presented. The actual Brookhaven National Laboratory (BNL) campus electrical network is used as an example to show the effectiveness of this approach. The results show that these technical and economic analyses of hybrid renewable energy systems are essential for the efficient utilization of renewable energy resources for microgird applications.« less

  5. Modelling Framework and the Quantitative Analysis of Distributed Energy Resources in Future Distribution Networks

    NASA Astrophysics Data System (ADS)

    Han, Xue; Sandels, Claes; Zhu, Kun; Nordström, Lars

    2013-08-01

    There has been a large body of statements claiming that the large-scale deployment of Distributed Energy Resources (DERs) could eventually reshape the future distribution grid operation in numerous ways. Thus, it is necessary to introduce a framework to measure to what extent the power system operation will be changed by various parameters of DERs. This article proposed a modelling framework for an overview analysis on the correlation between DERs. Furthermore, to validate the framework, the authors described the reference models of different categories of DERs with their unique characteristics, comprising distributed generation, active demand and electric vehicles. Subsequently, quantitative analysis was made on the basis of the current and envisioned DER deployment scenarios proposed for Sweden. Simulations are performed in two typical distribution network models for four seasons. The simulation results show that in general the DER deployment brings in the possibilities to reduce the power losses and voltage drops by compensating power from the local generation and optimizing the local load profiles.

  6. Van der waals forces on thin liquid films in capillary tubes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Herdt, G.C.; Swanson, L.W.

    1993-10-01

    A theory of the van der Waals attraction between a thin liquid films and a capillary tube is presented assuming the presence of a vapor-liquid interface. The model is based on the surface mode analysis method of van Kampen et al. Values for the van der Waals interaction energy per unit area were calculated for liquid films of pentane on a gold substrate assuming a thin liquid film. Results indicate that the effect of capillary curvature on the van der Waals interaction increases as the ratio of the liquid film thickness to the capillary radius is increased. This trend ismore » consistent with predictions based on the Hamaker theory. Deviations from results based on the Hamaker theory are easily explained in terms of retardation of the van der Waals interaction. Because the effect of capillary curvature increases in the regime where retardation effects become important, curvature effects constitute a small correction to the van der Waals forces in a capillary tube.« less

  7. Localised states in organic semiconductors and their detection

    NASA Astrophysics Data System (ADS)

    Imperia, Paolo

    2002-06-01

    New polymers and low molecular compounds, suitable for organic light emitting devices and organic electronic applications, have been synthesised in this years in order to obtain electron transport characteristics compatible with requirements for applications in real plastic devices. However, despite of the technological importance and of the relevant progress in devices manufacture, fundamental physical properties of such class of materials are still not enough studied. In particular extensive presence of distributions of localised states inside the band gap has a deep impact on their electronic properties. Such presence of shallow traps as well as the influence of the sample preparation conditions on deep and shallow localised states have not been, until now, systematically explored. The thermal techniques are powerful tools in order to study localised levels in inorganic and organic materials. Thermally stimulated luminescence (TSL), thermally stimulated currents (TSC) and thermally stimulated depolarisation currents (TSDC) allow to deeply look to shallow and deep trap levels as well as they permit to study, in synergy with dielectric spectroscopy (DES), polarisation and depolarisation effects. We studied, by means of numerical simulations, the first and the second order kinetic equations characterised by negligible and strong re-trapping respectively. We included in the equations Gaussian, exponential and quasi-continuous distributions of localised states. The shapes of the theoretical peaks have been investigated by means of systematic variation of the two main parameters of the equations, i. e. the energy trap depth E and the frequency factor a and of the parameters regulating the distributions, in particular for a Gaussian distribution the distribution width s and the integration limits. The theoretical findings have been applied to experimental glow curves. Thin films of polymers and low molecular compounds. Polyphenylquinoxalines, trisphenylquinoxalines and oxadiazoles, studied because of their technological relevance, show complex thermograms, having several levels of localised states and depolarisation peaks. In particular well ordered films of an amphiphilic substituted 2-(p-nitrophenyl)-5-(p-undecylamidophenyl)-1,3,4-oxadiazole (NADPO) are characterised by rich TSL thermograms. A wide region of shallow traps, localised at Em = 4 meV, has been successfully fit by means of a first order kinetic equation having a Gaussian distribution of localised states. Two further peaks, having a different origin, have been characterised. The peaks at Tm = 221.5 K and Tm = 254.2 have activation energy of Em= 0.63 eV and Em = 0.66 eV, frequency factor s = 2.4x1012 s-1 and s = 1.85x1011 s-1, distribution width s = 0.045 eV and s = 0.088 eV respectively. Increasing the number of thermal cycle, a peak, probably connected with structural defects, appears at Tm = 197.7 K. The numerical analysis of this peak was performed by means of a first order equation containing a Gaussian distribution of traps. The activation energy of the trap level is centred at Em = 0.55 eV. The distribution is perfectly symmetric with a quite small width s = 0.028 eV. The frequency factor is s = 1.15 x 1012 s-1, resulting of the same order of magnitude of its neighbour peak at Tm = 221.5 K, having both, probably, the same origin. Furthermore the work demonstrates that the shape of the glow curves is strongly influenced by the excitation temperature and by the thermal cycles. For that reason Gaussian distributions of localised states can be confused with exponential distributions if the previous thermal history of the samples is not adequately considered. In den letzten Jahren ist eine Vielzahl neuer organischer Polymere und niedermolekularer Verbindungen synthetisiert worden, die sich als aktive Komponente für Elektrolumineszenz-Bauelemente und andere elektronische Anwendungen eignen. Trotz der großen technologischen Bedeutung und des erheblichen Fortschrittes, der bei der Herstellung solcher Materialien erzielt worden ist, sind grundlegende physikalische Eigenschaften dieser Materialklassen noch nicht ausreichend erforscht. Insbesondere das Auftreten lokalisierter Zustände innerhalb der Bandlücke hat besondere Bedeutung für ihre elektronischen Eigenschaften. Sowohl die Präsenz dieser flachen traps (Fallen, Löcher) als auch der Einfluß der Herstellungsbedingungen auf die tiefen und flachen lokalisierten Zustände wurden bisher nicht systematisch untersucht. Thermische Techniken sind wichtige Methoden, um lokalisierte Niveaus in organischen und anorganischen Materialien zu erforschen. Themisch-Stimulierte Lumineszenz (TSL), Thermisch-Stimulierte Ströme (TSC) und Thermisch-Stimulierte Depolarisierte Ströme (TSDC) ermöglichen die Untersuchung flacher und tiefer traps; in Verbindung mit DiElektrischer Spektroskopie (DES) können außerdem Polarisations- und Depolarisationseffekte studiert werden. Mit Hilfe numerischer Simulationen haben wir die kinetischen Gleichungen erster und zweiter Ordnung untersucht, die sich durch schwaches bzw. starkes Wieder-Fangen beschreiben lassen. In diesen Gleichungen haben wir Gaussian-, exponentielle und quasi-kontinuierliche Verteilungen von lokalisierten Zustände berücksichtigt. Durch Veränderung der beiden wichtigsten Parameter (Tiefe der traps E und Häufigkeit) konnte die Form der thermischen Maxima untersucht werden. Auch die die Gaussian-Verteilung bestimmenden Faktoren wurden verändert. Diese theoretischen Ergebnisse wurden auf die experimentellen Glow-Kurven angewandt. Dünne Filme aus polymeren und niedermolekularen Verbindungen (Polyphenylquinoxaline, Trisphenylquinoxaline und Oxadiazole), die wegen ihrer technologischen Bedeutung ausgewählt wurden, zeigen komplexes thermisches Verhalten. Insbesondere hoch geordnete Filme eines amphiphil substituierten 2-(p-nitrophenyl)-5-(p-undecylamidophenyl)-1,3,4-oxadiazols (NADPO) zeichnen sich durch komplexe TSL-Diagramme aus. Im Bereich von Em = 4 meV wurde eine Region flacher traps gefunden. Zwei weitere TSL-Maxima treten bei Tm = 221.5 K bzw. Tm = 254.2 K auf. Sie besitzen Aktivierungsenergien von Em= 0.63 eV bzw. Em = 0.66 eV, ihre Frequenzfaktoren betragen s = 2.4x1012 s-1 bzw. s = 1.85x1011 s-1, sie zeigen Breiten der Verteilung von s = 0.045 eV bzw. s = 0.088 eV. Des weiteren zeigt diese Arbeit, daß die Form der Glow-Kurven stark von der Anregungstemperatur und vom thermischen Kreislauf beeinflußt wird.

  8. Distributed Energy Resources Customer Adoption Model - Graphical User Interface, Version 2.1.8

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ewald, Friedrich; Stadler, Michael; Cardoso, Goncalo F

    The DER-CAM Graphical User Interface has been redesigned to consist of a dynamic tree structure on the left side of the application window to allow users to quickly navigate between different data categories and views. Views can either be tables with model parameters and input data, the optimization results, or a graphical interface to draw circuit topology and visualize investment results. The model parameters and input data consist of tables where values are assigned to specific keys. The aggregation of all model parameters and input data amounts to the data required to build a DER-CAM model, and is passed tomore » the GAMS solver when users initiate the DER-CAM optimization process. Passing data to the GAMS solver relies on the use of a Java server that handles DER-CAM requests, queuing, and results delivery. This component of the DER-CAM GUI can be deployed either locally or remotely, and constitutes an intermediate step between the user data input and manipulation, and the execution of a DER-CAM optimization in the GAMS engine. The results view shows the results of the DER-CAM optimization and distinguishes between a single and a multi-objective process. The single optimization runs the DER-CAM optimization once and presents the results as a combination of summary charts and hourly dispatch profiles. The multi-objective optimization process consists of a sequence of runs initiated by the GUI, including: 1) CO2 minimization, 2) cost minimization, 3) a user defined number of points in-between objectives 1) and 2). The multi-objective results view includes both access to the detailed results of each point generated by the process as well as the generation of a Pareto Frontier graph to illustrate the trade-off between objectives. DER-CAM GUI 2.1.8 also introduces the ability to graphically generate circuit topologies, enabling support to DER-CAM 5.0.0. This feature consists of: 1) The drawing area, where users can manually create nodes and define their properties (e.g. point of common coupling, slack bus, load) and connect them through edges representing either power lines, transformers, or heat pipes, all with user defined characteristics (e.g., length, ampacity, inductance, or heat loss); 2) The tables, which display the user-defined topology in the final numerical form that will be passed to the DER-CAM optimization. Finally, the DER-CAM GUI is also deployed with a database schema that allows users to provide different energy load profiles, solar irradiance profiles, and tariff data, that can be stored locally and later used in any DER-CAM model. However, no real data will be delivered with this version.« less

  9. Gerbstoffe aus Potentilla officinalis wirken entzündungshemmend im UV-Erythem-Test und bei Anwendung auf atopischer Haut.

    PubMed

    Hoffmann, Julia; Wölfle, Ute; Schempp, Christoph M; Casetti, Federica

    2016-09-01

    Das Rhizom von Potentilla officinalis (PO) ist reich an Gerbstoffen und wird traditionell zur äußerlichen Behandlung von Entzündungen der Haut und der Schleimhäute verwendet. Ziel der vorliegenden Arbeit war die Bestätigung der antiinflammatorischen Eigenschaften von PO mittels eines UV-Erythem-Tests und einer klinischen Anwendungsstudie bei atopischer Haut. Die antiinflammatorische Wirkung eines PO-Extrakts (standardisiert auf 2 % Trockensubstanz) wurde in einer prospektiven, randomisierten, placebokontrollierten Doppelblindstudie mit 40 gesunden Erwachsenen im UV-Erythem-Test im Vergleich zu 1 % Hydrocortisonacetat untersucht. Im Rahmen einer prospektiven nicht kontrollierten Studie wurde die Wirkung und Verträglichkeit der 2 % PO-Creme an zwölf Erwachsenen und zwölf Kindern mit atopischer Haut nach Anwendung über zwei Wochen in einem definierten Testareal anhand eines Teil-SCORAD untersucht. Zusätzlich wurde die Beeinflussung der Hautrötung im Testareal photometrisch gemessen. Im UV-Erythem-Test zeigte die PO-Creme eine signifikante Reduktion des Erythemindex im Vergleich zum Vehikel. Die antiinflammatorische Wirkung des Verums entsprach der der 1 % Hydrocortisonacetat-Creme. Die klinische Studie bei Atopikern zeigte eine signifikante Abnahme des Teil-SCORAD und des Erythems im Testareal. Es wurden keine Unverträglichkeitsreaktionen beobachtet. PO als 2%ige Zubereitung besitzt entzündungshemmende Eigenschaften und ist wirksam und gut verträglich auf atopischer Haut. © 2016 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

  10. Sensor Fusion to Infer Locations of Standing and Reaching Within the Home in Incomplete Spinal Cord Injury.

    PubMed

    Lonini, Luca; Reissman, Timothy; Ochoa, Jose M; Mummidisetty, Chaithanya K; Kording, Konrad; Jayaraman, Arun

    2017-10-01

    The objective of rehabilitation after spinal cord injury is to enable successful function in everyday life and independence at home. Clinical tests can assess whether patients are able to execute functional movements but are limited in assessing such information at home. A prototype system is developed that detects stand-to-reach activities, a movement with important functional implications, at multiple locations within a mock kitchen. Ten individuals with incomplete spinal cord injuries performed a sequence of standing and reaching tasks. The system monitored their movements by combining two sources of information: a triaxial accelerometer, placed on the subject's thigh, detected sitting or standing, and a network of radio frequency tags, wirelessly connected to a wrist-worn device, detected reaching at three locations. A threshold-based algorithm detected execution of the combined tasks and accuracy was measured by the number of correctly identified events. The system was shown to have an average accuracy of 98% for inferring when individuals performed stand-to-reach activities at each tag location within the same room. The combination of accelerometry and tags yielded accurate assessments of functional stand-to-reach activities within a home environment. Optimization of this technology could simplify patient compliance and allow clinicians to assess functional home activities.

  11. Guidelines for the Organization of Short Courses and Workshops on the Dissemination of Data in Science and Technology.

    ERIC Educational Resources Information Center

    Watson, David G.

    This document presents guidelines on the organization of short courses and workshops on the dissemination of data in science and technology. Such courses can be either of a "stand-alone" nature or they can constitute scientific data components of more general courses in information science. These courses are intended for documentalists,…

  12. Fundamentals of Acoustic Measurements on Trees and Logs and Their Implication to Field Application

    Treesearch

    Xiping Wang

    2011-01-01

    Acoustic technologies have been well established as material evaluation tools in the past several decades, and their use has become widely accepted in the forest products industry for on-line quality control and products grading. Recent research developments on acoustic sensing technology offer further opportunities to evaluate standing trees and logs for general wood...

  13. An Inconvenient Tool: Rethinking the Role of Slideware in the Writing Classroom

    ERIC Educational Resources Information Center

    Gries, Laurie E.; Brooke, Collin Gifford

    2010-01-01

    Every so often, a technology will saturate the market to the extent that the name of the product becomes a stand-in for the technology itself. While it belongs to the broader genre of slideware, Microsoft PowerPoint is perhaps the best example of software that has achieved that level of ubiquity. Despite Apple's Keynote, the Presentation Editor…

  14. Pearson-Praxis Assessments Review Teacher Certification Assessment Technology Education: A Report for the Council on Technology and Engineering Teacher Education

    ERIC Educational Resources Information Center

    Mahoney, Mark P.

    2015-01-01

    The Praxis Series, developed by Educational Testing Services (ETS), has been the long standing assessment for teacher licensure. It is comprised of three separate skills examinations: (1) Praxis Core Academic Skills for Educators (Core) (attempts to measure academic skills in reading, writing, and mathematics; content knowledge of candidates…

  15. Air Force Technical Objective Document, FY89.

    DTIC Science & Technology

    1988-04-01

    threat warning; multimegawatt stand-off jammers; a family of new, broadband , active decoy expendables; E4? subsystems and EW suites for Military...and monolithic integrated circuits. (3) Microwave TWTs Develop microwave tube technology and selected thermionic power sources and amplifiers for ECM...Improved design reliability and multiple application of tube technology are stressed. Improve Traveling Wave Tube ( TWT ) reliability by instrumenting a TWT

  16. Leveraging Simulation Against the F-16 Flying Training Gap

    DTIC Science & Technology

    2005-11-01

    must leverage emerging simulation technology into combined flight training to counter mission employment complexity created by technology itself...two or more of these stand-alone simulators creates a mission training center (MTC), which when further networked create distributed mission...operations (DMO). Ultimately, the grand operational vision of DMO is to interconnect non-collocated users creating a “virtual” joint training environment

  17. Innovative Outdoor Fieldwork Pedagogies in the Higher Education Sector: Optimising the Use of Technology

    ERIC Educational Resources Information Center

    Thomas, Glyn J.; Munge, Brendon

    2017-01-01

    Outdoor fieldwork has been a long-standing pedagogy in the higher education sector, across a range of disciplines. Based on a review of the literature, this paper explores the use of outdoor fieldwork in the 21st century university with particular reference to the way technology contributes to student learning. Research has indicated that…

  18. Report of the analysis of the joint medium range air to surface missile program

    NASA Astrophysics Data System (ADS)

    1980-01-01

    The objective of this effort completed between July, 1979 and January, 1980 was to investigate technical alternatives and make recommendations concerning management approaches to accomplish the project goals. The purpose of this report is to formalize those recommendations and to identify future courses of action alternatives. The basic concepts incorporated in a supersonic stand-off, air-to-surface missile have existed in Navy advance planning for many years. Navy action on this concept was formalized in 1967 with the decision to initiate a funded technology program to produce a system technology prototype of an advance tactical stand-off missile. Parallel development of propulsion, guidance, and other subsystem technologies conducted by the Air Force, industry, and other countries have also contributed to the current technology base. In May 1978, the Chief of Naval Operations established a requirement for a survivable medium range air-to-surface missile with the issuance of operational requirement W-0650-TW, 'Medium Range Air-to-Surface Missile'. The requirements delineate the need for an offensive air-to-surface missile that can penetrate and survive against defenses expected to be encountered in the 80's and 90's.

  19. Nuclear Terrorism - Dimensions, Options, and Perspectives in Moldova

    NASA Astrophysics Data System (ADS)

    Vaseashta, Ashok; Susmann, P.; Braman, Eric W.; Enaki, Nicolae A.

    Securing nuclear materials, controlling contraband and preventing proliferation is an international priority to resolve using technology, diplomacy, strategic alliances, and if necessary, targeted military exercises. Nuclear security consists of complementary programs involving international legal and regulatory structure, intelligence and law enforcement agencies, border and customs forces, point and stand-off radiation detectors, personal protection equipment, preparedness for emergency and disaster, and consequence management teams. The strategic goal of UNSCR 1540 and the GICNT is to prevent nuclear materials from finding their way into the hands of our adversaries. This multi-jurisdictional and multi-agency effort demands tremendous coordination, technology assessment, policy development and guidance from several sectors. The overall goal envisions creating a secured environment that controls and protects nuclear materials while maintaining the free flow of commerce and individual liberty on international basis. Integral to such efforts are technologies to sense/detect nuclear material, provide advance information of nuclear smuggling routes, and other advanced means to control nuclear contraband and prevent proliferation. We provide an overview of GICNT and several initiatives supporting such efforts. An overview is provided of technological advances in support of point and stand-off detection and receiving advance information of nuclear material movement from perspectives of the Republic of Moldova.

  20. Das Lektin aus der Erbse Pisum sativum : Bindungsstudien, Monomer-Dimer-Gleichgewicht und Rückfaltung aus Fragmenten

    NASA Astrophysics Data System (ADS)

    Küster, Frank

    2002-11-01

    Das Lektin aus Pisum sativum, der Gartenerbse, ist Teil der Familie der Leguminosenlektine. Diese Proteine haben untereinander eine hohe Sequenzhomologie, und die Struktur ihrer Monomere, ein all-ß-Motiv, ist hoch konserviert. Dagegen gibt es innerhalb der Familie eine große Vielfalt an unterschiedlichen Quartärstrukturen, die Gegenstand kristallographischer und theoretischer Arbeiten waren. Das Erbsenlektin ist ein dimeres Leguminosenlektin mit einer Besonderheit in seiner Struktur: Nach der Faltung in der Zelle wird aus einem Loop eine kurze Aminosäuresequenz herausgeschnitten, so dass sich in jeder Untereinheit zwei unabhängige Polypeptidketten befinden. Beide Ketten sind aber stark miteinander verschränkt und bilden eine gemeinsame strukturelle Domäne. Wie alle Lektine bindet Erbsenlektin komplexe Oligosaccharide, doch sind seine physiologische Rolle und der natürliche Ligand unbekannt. In dieser Arbeit wurden Versuche zur Entwicklung eines Funktionstests für Erbsenlektin durchgeführt und seine Faltung, Stabilität und Monomer-Dimer-Gleichgewicht charakterisiert. Um die spezifische Rolle der Prozessierung für Stabilität und Faltung zu untersuchen, wurde ein unprozessiertes Konstrukt in E. coli exprimiert und mit der prozessierten Form verglichen. Beide Proteine zeigen die gleiche kinetische Stabilität gegenüber chemischer Denaturierung. Sie denaturieren extrem langsam, weil nur die isolierten Untereinheiten entfalten können und das Monomer-Dimer-Gleichgewicht bei mittleren Konzentrationen an Denaturierungsmittel auf der Seite der Dimere liegt. Durch die extrem langsame Entfaltung zeigen beide Proteine eine apparente Hysterese im Gleichgewichtsübergang, und es ist nicht möglich, die thermodynamische Stabilität zu bestimmen. Die Stabilität und die Geschwindigkeit der Assoziation und Dissoziation in die prozessierten bzw. nichtprozessierten Untereinheiten sind für beide Proteine gleich. Darüber hinaus konnte gezeigt werden, dass auch unter nicht-denaturierenden Bedingungen die Untereinheiten zwischen den Dimeren ausgetauscht werden. Die Renaturierung der unprozessierten Variante ist unter stark nativen Bedingungen zu 100 % möglich. Das prozessierte Protein dagegen renaturiert nur zu etwa 50 %, und durch die Prozessierung ist die Faltung stark verlangsamt, der Faltungsprozess ist erst nach mehreren Tagen abgeschlossen. Im Laufe der Renaturierung wird ein Intermediat populiert, in dem die längere der beiden Polypeptidketten ein Homodimer mit nativähnlicher Untereinheitenkontaktfläche bildet. Der geschwindigkeitsbestimmende Schritt der Renaturierung ist die Assoziation der entfalteten kürzeren Kette mit diesem Dimer. The lectin from Pisum sativum (garden pea) is a member of the family of legume lectins. These proteins share a high sequence homology, and the structure of their monomers, an all-ß-motif, is highly conserved. Their quaternary structures, however, show a great diversity which has been subject to cristallographic and theoretical studies. Pea lectin is a dimeric legume lectin with a special structural feature: After folding is completed in the cell, a short amino acid sequence is cut out of a loop, resulting in two independent polypeptide chains in each subunit. Both chains are closely intertwined and form one contiguous structural domain. Like all lectins, pea lectin binds to complex oligosaccharides, but its physiological role and its natural ligand are unknown. In this study, experiments to establish a functional assay for pea lectin have been conducted, and its folding, stability and monomer-dimer-equilibrium have been characterized. To investigate the specific role of the processing for stability and folding, an unprocessed construct was expressed in E. coli and compared to the processed form. Both proteins have the same kinetic stability against chemical denaturant. They denature extremely slowly, because only the isolated subunits can unfold, and the monomer-dimer-equilibrium favors the dimer at moderate concentrations of denaturant. Due to the slow unfolding, both proteins exhibit an apparent hysteresis in the denaturation transition. Therefore it has not been possible to determine their thermodynamic stability. For both proteins, the stability and the rates of association and dissociation into processed or unprocessed subunits, respectively, are equal. Furthermore it could be shown that even under non-denaturing conditions the subunits are exchanged between dimers. Renaturation of the unprocessed variants is possible under strongly native conditions with 100 % yield. The processed protein, however, can be renatured with yields of about 50 %, and its refolding is strongly decelerated. The folding process is finished only after several days. During renaturation, an intermediate is populated, in which the longer of the two polypeptide chains forms a homodimer with a native-like subunit interface. The rate limiting step of renaturation is the association of the unfolded short chain with this dimer.

  1. Rocket Testing and Integrated System Health Management

    NASA Technical Reports Server (NTRS)

    Figueroa, Fernando; Schmalzel, John

    2005-01-01

    Integrated System Health Management (ISHM) describes a set of system capabilities that in aggregate perform: determination of condition for each system element, detection of anomalies, diagnosis of causes for anomalies, and prognostics for future anomalies and system behavior. The ISHM should also provide operators with situational awareness of the system by integrating contextual and timely data, information, and knowledge (DIaK) as needed. ISHM capabilities can be implemented using a variety of technologies and tools. This chapter provides an overview of ISHM contributing technologies and describes in further detail a novel implementation architecture along with associated taxonomy, ontology, and standards. The operational ISHM testbed is based on a subsystem of a rocket engine test stand. Such test stands contain many elements that are common to manufacturing systems, and thereby serve to illustrate the potential benefits and methodologies of the ISHM approach for intelligent manufacturing.

  2. Bewehrte Betonbauteile unter Betriebsbedingungen: Forschungsbericht

    NASA Astrophysics Data System (ADS)

    Eligehausen, Rolf; Kordina, Karl; Schießl, Peter

    2000-09-01

    Vorwort. Teil I: Rißbreiten (Gert König) 1 Ein mechanisches Modell zur Erhöhung der Vorhersagegenauigkeit über die Rißbreiten unter Betriebsbedingungen (Gert König und Michael Fischer). 1.1 Einleitung und Zielsetzung. 1.2 Versuchsprogramm. 1.3 Meßtechnik. 1.4 Belastung und Versuchsdurchführung. 1.5 Literatur. 2 Rißbreiten und Verformungszunahme vorgespannter Bauteile unter wiederholter Last - und Zwangbeanspruchung (Gert König und Michael Fischer). 2.1 Einleitung und Zielsetzung. 2.2 Versuchsprogramm. 2.3 Auswertung. 2.4 Ausblick. 2.5 Literatur. 3 Rißverhalten von Beton bei plötzlicher Abkühlung (Viktor Mechtcherine und Harald S. Müller). 3.1 Einleitung. 3.2 Experimentelle Untersuchungen. 3.3 Formulierung eines Stoffgesetzes für thermisch beanspruchten Beton. 3.4 Riß entwicklung in einer Betonplatte unter Temperaturschock. 3.5 Zusammenfassung. 3.6 Literatur. 4 Stahlfaserbeton unter Betriebsbedingungen bei Dauerbeanspruchung (Bo Soon Kang, Bernd Schnütgen und Friedhelm Stangenberg). 4.1 Einleitung. 4.2 Wirkung von Stahlfasern im Beton. 4.3 Versuchsprogramm. 4.4 Untersuchungen zum Verbundverhalten. 4.5 Untersuchungen zum Verhalten unter Biegebeanspruchung. 4.6 Theoretische Untersuchungen. 4.7 Literatur. 5 Experimentelle Untersuchungen an Stahlbeton-Zugkörpern unter wiederholter Belastung zur Ermittlung des versteifenden Einflusses der Mitwirkung des Betons zwischen den Rissen (Petra Seibel und Gerhard Mehlhorn). 5.1 Einleitung. 5.2 Ansatz zur Bestimmung der Mitwirkung des Betons zwischen den Rissen nach Eurocode 2, Model Code 90 und Günther. 5.3 Experimentelle Untersuchungen. 5.4 Ergebnisse. 5.5 Zusammenfassung. 5.6 Literatur. 6 Riß- und Verformungsverhalten von vorgefertigten Spannbetonträgern unter Betriebsbedingungen bei besonderer Berücksichtigung des Betonalters (Monika Maske, Heinz Meichsner und Lothar Schubert). 6.1 Einleitung. 6.2 Beschreibung der Fertigteilträger. 6.3 Belastungsversuche. 6.4 Ergebnisse. 6.5 Zusammenfassung. 6.6 Literatur. Teil II: Verbundfragen (Rolf Eligehausen). 1 Ein mechanisches Modell zur Beschreibung des Verbundverhaltens zwischen Stahl und Beton (Gert König, Nguyen V. Tue und Wolfgang Kurz). 1.1 Einleitung. 1.2 Beschreibung der Kraftübertragung zwischen Stahl und Beton. 1.3 Vorstellung des Modells. 1.4 Materialgesetze für die Berechnung der Verformung des Fachwerks. 1.5 Vergleich zwischen Versuch und Modell. 1.6 Zusammenfassung und Ausblick. 1.7 Literatur. 2 Verbund unter nicht ruhender Beanspruchung (Rainer Koch und György L. Balázs). 2.1 Übersicht über die durchgeführten Versuche. 2.2 Versuchkörper und Materialien. 2.3 Versuchseinrichtungen. 2.4 Versuche und Ergebnisse. 2.5 Zusammenfassung und Ausblick. 2.6 Literatur. 3 Trag- und Verformungsverhalten von Stahlbetontragwerken unter Betriebsbelastung (Thomas M. Sippel und Rolf Eligehausen). 3.1 Einleitung. 3.2 Allgemeines. 3.3 Rechenmodell und Materialmodelle. 3.4 Vergleich zwischen Versuchen und Rechnung. 3.5 Parameterstudien. 3.6 Vereinfachtes Rechenmodell. 3.7 Zusammenfassung. 3.8 Literatur. 4 Verbundverhalten von Spanngliedern mit nachträglichem Verbund unter Betriebsbedingungen (Josef Hegger, Norbert Will und Heiner Cordes). 4.1 Einführung. 4.2 Verbundverhalten von Spanngliedern. 4.3 Zeitabhängige Effekte des Verbunds. 4.4 Versuche unter statischer Langzeitbeanspruchung. 4.5 Versuche unter dynamischer Langzeitbeanspruchung. 4.6 Bemessungsvorschlag für Verbundkennwerte. 4.7 Zusammenfassung. 4.8 Literatur. 5 Spannungsumlagerungen in gemischt bewehrten Querschnitten (Josef Hegger, Heiner Cordes und Matthias Rudlof). 5.1 Problemstellung und Zielsetzung. 5.2 Spannungsumlagerungen bei gemischter Bewehrung. 5.3 Versuche an zentrischen Zugkörpern. 5.4 Versuchsergebnisse. 5.5 Ermittlung und Vergleich von Verbundkennwerten. 5.6 Zusammenfassung. 5.7 Literatur. Teil III: Bauteile (Karl Kordina). 1 Einfluß von Längsbeanspruchungen auf den Neigungswinkel der Schubrisse (Marek Los und Ulrich Quast). 1.1 Einleitung. 1.2 Ungerissener Zustand. 1.3 Gerissener Zustand. 1.4 FEM-Berechnungen. 1.5 Zusammenfassung. 1.6 Literatur. 2 Auswirkungen des unterschiedlichen Verformungsverhaltens bei Beund Entlastung auf die Beanspruchungen im Gebrauchszustand (Jochen Keysberg). 2.1 Einleitung und Zielsetzung. 2.2 Modelle für die Momenten-Verkrümmungs-Beziehung. 2.3 Programm zur nichtlinearen Berechnung. 2.4 Einfluß von Lastwechseln auf nichtlineare Berechnungen. 2.5 Zusammenfassung. 2.6 Literatur. 3 3D-Analyse von Balken-Stützen-Verbindungen aus normal- und hochfestem Beton unter zyklischer Beanspruchung (Josko Ozbolt, Yijun Li und Rolf Eligehausen). 3.1 Einleitung. 3.2 Materialmodell und FE-Diskretisierung. 3.3 Numerische Analyse. 3.4 Schlußfolgerungen. 3.5 Zusammenfassung. 3.6 Literatur. 4 Der Einfluß von freien Schwingungen infolge dynamischer Belastung auf die Deterioration eines Bauwerks (Manfred Specht und Michael Kramp). 4.1 Veranlassung des Forschungsvorhabens. 4.2 Forschungsziele. 4.3 Versuchsträger, Versuchsdurchführung und Versuchsergebnisse. 4.4 Auswertung. 4.5 Ergebnisse für die Systemidentifikation von Stahlbetonkonstruktionen. 4.6 Literatur. 5 Lokale Schwind- und Temperaturgradienten in bewehrten, oberflächennahen Zonen von Betonkonstruktionen (Josef Eibl und Stephan Kranz). 5.1 Problemstellung. 5.2 Temperatur- und Feuchtefeldberechnung. 5.3 Numerisches Berechnungsmodell zur Spannungsanalyse im Beton. 5.4 Durchgeführte Versuche. 5.5 Rechnerische Untersuchungen. 5.6 Zusammenfassung. 5.7 Literatur. 6 Wassereindringverhalten von Flüssigkeiten beim Biegeriß (Gert König und Christian Brunsch). 6.1 Problemstellung. 6.2 Experimentelle Untersuchungen. 6.3 Entwicklung eines Modells zur rechnerischen Abschätzung des zeitlichen Eindringens einer Wassermenge in Biegerisse von Stahlbetonbauteilen. 6.4 Zusammenfassung und Diskussion der Versuchsreihe. 6.5 Literatur. 7 Dauerhaftigkeitsprobleme von offenen Becken (György Iványi, Wilhelm Buschmeyer und Udo Paas). 7.1 Einleitung. 7.2 Bestandsaufnahme. 7.3 Felduntersuchungen. 7.4 Laboruntersuchungen. 7.5 Berechnungen. 7.6 Entwurfs- und Ausführungskriterien. 7.7 Literatur. Teil IV: Korrosion und Ermüdung (Peter Schießl). 1 Ermüdungskorrosion von Spannstahl (Herbert Kupfer und Hans H. Müller). 1.1 Forschungsziel. 1.2 Korrosionsversuche an Spannstählen. 1.3 Methoden zur Erkennung von Anrissen. 2 Korrosionsermüdung von Stahl in Betonbauteilen (J. W. Weber, Peter Schießl und Jörg Moersch). 2.1 Allgemeines. 2.2 Wesentliche Einflüsse bei der Schwingungsrißkorrosion. 2.3 Ziel der Untersuchungen. 2.4 Prüfkörper und Betone. 2.5 Chloridbeaufschlagung. 2.6 Ergebnisse. 2.7 Zusammenfassung. 2.8 Literatur. 3 Untersuchungen zum Rißkorrosionsverhalten von Spannstählen unter Betriebsbedingungen (Jörg Moersch und Peter Schießl). 3.1 Einführung und Ziel. 3.2 Untersuchungsprogramm. 3.3 Ergebnisse. 3.4 Zusammenfassung der Ergebnisse. 3.5 Literatur. 4 Schwingfestigkeit von Stahlbeton bei Beanspruchung mit Meerwasser (Ulf Nürnberger und Willibald Beul). 4.1 Einführung. 4.2 Mechanismus. 4.3 Schwingfestigkeitsuntersuchungen. 4.4 Folgerungen. 4.5 Literatur. 5 Wasserstoffinduzierte Spannungsrißkorrosion von zugschwellbeanspruchten Spannstählen (Ulf Nürnberger und Willibald Beul). 5.1 Einführung. 5.2 Untersuchungen. 5.3 Folgerung. 5.4 Literatur. 6 Selbstheilung und Bewehrungskorrosion bei von schwach sauren Wässern durchströmten Trennrissen in bewehrtem Beton (Wieland Ramm und Michaela Biscoping). 6.1 Übersicht. 6.2 Einleitung. 6.3 Versuchsprogramm. 6.4 Versuchsergebnisse. 6.5 Zusammenfassung. 6.6 Literatur. 7 Untersuchungen zur Reibermüdung bei teilweise vorgespannten Bauteilen (Heiner Cordes, Josef Hegger und Jens U. Neuser). 7.1 Einleitung. 7.2 Stand der Forschung. 7.3 Versuchsaufbau und Versuchsdurchführung. 7.4 Versuchsergebnisse. 7.5 Zusammenfassung und Ausblick. 7.6 Literatur. Teil V: Junger Beton (Ferdinand S. Rostásy). 1 Ermittlung und Berechnung des Nullspannungstemperaturgradienten im jungen Beton (Rupert Springenschmid und Jean-Louis Bostvironnois). 1.1 Einleitung. 1.2 Der Nullspannungstemperaturgradient. 1.3 Ergebnisse und Schußfolgerungen. 1.4 Literatur. 2 Experimentelle Ermittlung der Verformungskennwerte von jungem Beton und der Zwangspannungen in situ (Markus Plannerer und Rupert Springenschmid). 2.1 Einleitung. 2.2 Versuche zur Ermittlung der Verformungskennwerte und der Zwangspannungen. 2.3 Laborergebnisse. 2.4 In-situ-Ergebnisse. 2.5 Zusammenfassung. 2.6 Literatur. 3 Werkstoffeigenschaften jungen Betons--Experimente und Modellierung (Ferdinand S. Rostásy und Alex-W. Gutsch). 3.1 Einleitung. 3.2 Versuche und Modellbildung. 3.3 Zusammenfassung. 3.4 Literatur.

  3. Physik gestern und heute: Visualisierung mit der Schlierenmethode

    NASA Astrophysics Data System (ADS)

    Heering, Peter

    2006-07-01

    Der Name des österreichischen Forschers Ernst Mach ist heute noch mit der Schallgeschwindigkeit verbunden. Diese Auszeichnung resultiert aus Machs Untersuchungen, wie sich Projektile mit Überschallgeschwindigkeit durch die Luft bewegen. Gerade in jüngster Zeit hat die Anwendung derartiger Methoden durch technische Modifikationen wieder einen Aufschwung erfahren.

  4. Dynamical property analysis of fractionally damped van der pol oscillator and its application

    NASA Astrophysics Data System (ADS)

    Zhong, Qiuhui; Zhang, Chunrui

    2012-01-01

    In this paper, the fractionally damped van der pol equation was studied. Firstly, the fractionally damped van der pol equation was transformed into a set of integer order equations. Then the Lyapunov exponents diagram was given. Secondly, it was transformed into a set of fractional integral equations and solved by a predictor-corrector method. The time domain diagrams and phase trajectory were used to describe the dynamic behavior. Finally, the fractionally damped van der pol equation was used to detect a weak signal.

  5. Verbesserte Visualisierung der Koronararterien in MSCT-Daten mit direkter Vergleichbarkeit zur Angiographie

    NASA Astrophysics Data System (ADS)

    Lacalli, Christina; Jähne, Marion; Wesarg, Stefan

    In diesem Beitrag stellen wir neue, automatisierte Verfahren zur Visualisierung der Koronararterien einerseits und für eine direkte Vergleichbarkeit mit konventionellen Angiogrammen andererseits vor. Unser Ansatz umfasst Methoden für die automatische Extraktion des Herzens aus kontrastverstärkten CT-Daten, sowie für die Maskierung grosser kontrastmittelgefüllter Kavitäten des Herzens, um die Sichtbarkeit der Koronararterien bei der Darstellung mittels Volumenrendering zu verbessern. Zum direkten Vergleich mit konventionellen Angiographien wurde ein Verfahren zur automatischen Generierung von Projektionsansichten aus den CT-Daten entwickelt.

  6. Einsteins Spuren in den Archiven der Wissenschaft: Physikgeschichte

    NASA Astrophysics Data System (ADS)

    Marx, Werner

    2005-07-01

    Die Erwähnungen und Zitierungen von Einsteins Arbeiten dokumentieren lediglich den quantifizierbaren Anteil von Einsteins Beitrag zur Physik. Gleichwohl belegen sie die außergewöhnliche Resonanz und Langzeitwirkung seiner Arbeiten. Die Häufigkeit der Zitierungen entspricht nicht der allgemeinen Einschätzung ihrer Bedeutung. Insbesondere die Pionierarbeiten werden inzwischen als bekannt vorausgesetzt und nicht mehr explizit zitiert. Interessanterweise ist seine nach 1945 meist zitierte Arbeit nicht eine der Pionierarbeiten zur Quantenphysik oder Relativitätstheorie, sondern jene aus dem Jahr 1935 zum berühmten Einstein-Podolsky-Rosen-Paradoxon.

  7. Symmetriebrechung und Emergenz in der Kosmologie.

    NASA Astrophysics Data System (ADS)

    Mainzer, K.

    Seit der Antike wird der Aufbau des Universums mit einfachen und regulären (symmetrischen) Grundstrukturen verbunden. Diese Annahme liegt selbst noch den Standardmodellen der relativistischen Kosmologie zugrunde. Demgegenüber läßt sich die Emergenz neuer Strukturen von den Elementarteilchen über Moleküle bis zu den komplexen Systemen des Lebens als Symmetriebrechung verstehen. Symmetriebrechung und strukturelle Komplexität bestimmen die kosmische Evolution. Damit zeichnet sich ein fachübergreifendes Forschungsprogramm von Physik, Chemie und Biologie ab, in dem die Evolution des Universums untersucht werden kann.

  8. Physik

    NASA Astrophysics Data System (ADS)

    Gerthsen, Christian; Vogel, Helmut

    Die siebzehnte Auflage des Gerthsen ist zugleich die sechste in der Bearbeitung Helmut Vogels. Der Autor bereichert das klassische Studien- und Nachschlagewerk mit einem neuen Kapitel zur nichtlinearen Dynamik (auch Chaos und Fraktale werden besprochen) sowie acht instruktiven Farbtafeln. Daneben gibt es wieder kleinere Ergänzungen und Korrekturen. Wo die Darstellung wegen der selbstauferlegten Beschränkung im Umfang nicht alle Themen behandeln kann, helfen die mehr als zahlreichen Übungsaufgaben, die im Band Vogel, Probleme aus der Physik, ISBN 3-540-51217-9, mit Beiheft nun auch zur 17. Auflage verwendbar, ausführlich besprochen werden.

  9. A notable difference between ideal gas and infinite molar volume limit of van der Waals gas

    NASA Astrophysics Data System (ADS)

    Liu, Q. H.; Shen, Y.; Bai, R. L.; Wang, X.

    2010-05-01

    The van der Waals equation of state does not sufficiently represent a gas unless a thermodynamic potential with two proper and independent variables is simultaneously determined. The limiting procedures under which the behaviour of the van der Waals gas approaches that of an ideal gas are letting two van der Waals coefficients be zero rather than letting the molar volume become infinitely large; otherwise, the partial derivative of internal energy with respect to pressure at a fixed temperature does not vanish.

  10. Jacobus Schroeder van der Kolk (1797-1862): his resistance against materialism.

    PubMed

    Eling, P

    1998-07-01

    Schroeder van der Kolk is regarded as the founder of Dutch psychiatry and neurology. This paper describes his vitalistic views on the relation between body and soul, as formulated by him in a series of lectures. These lectures were intended to counteract the materialistic tendencies of some of Schroeder van der Kolk's French and German contemporaries. It is argued that Schroeder van der Kolk can be regarded as the transition in Holland from the "Naturphilosophie" approach to the modern experimental approach in physiology. Copyright 1998 Academic Press.

  11. The importance of housing characteristics in determining Der p 1 levels in carpets in New Zealand homes.

    PubMed

    Wickens, K; Mason, K; Fitzharris, P; Siebers, R; Hearfield, M; Cunningham, M; Crane, J

    2001-06-01

    A previous study of homes in Wellington, New Zealand showed that having carpets on floors was the most important determinant of floor Der p 1 levels, but there was much unexplained variability between houses in carpet levels. To determine to what extent housing characteristics might explain this variability in Der p 1 levels between houses. We returned to a selection of houses with carpets and sampled living room dust from 1 square metre for 1 min and from the whole floor at 5 m(2) per min. Der p 1 levels were estimated by double monoclonal antibody ELISA and are expressed as geometric mean microg/g and microg/m(2) (95% confidence intervals). Questionnaires were used to collect information on housing characteristics. Der p 1 levels were significantly higher in the 1 square metre sample (40.0, 31.9-50.2 microg/g; 53.4, 41.4-68.9 microg/m(2)) than in the whole room (25.8, 21.3-31.1 microg/g; 5.3, 3.8-7.4 microg/m(2)). However, results from the different sampling methods were correlated (r = 0.51, P = 0.001 for microg/g and r = 0.58, P = 0.001 for microg/m(2)). After controlling for possible confounders, houses with insulation or a room or garage below the living room had approximately half the Der p 1 concentration (P = 0.05 for both samples) and the amount of Der p 1 per m(2) (P = 0.004 for the 1 square meter sample, P = 0.06 for the whole room sample) than houses without these features. Having more than two children was associated with higher levels of Der p 1 in 1 square meter, significant (P = 0.05) for microg/m(2). Carpet underlay less than 8 mm thick was associated with an almost 3-fold increase in microg/m(2) Der p 1 (P = 0.03) and a 1.6-fold increase in microg/g Der p 1 (P = 0.08) in the whole room sample, when compared with thicker carpet underlays. The presence of insulation is the single most important housing characteristic explaining the between-house variability in Der p 1 levels on carpeted living room floors.

  12. Effects of anisotropy in permeability on the two-phase flow and heat transfer in a porous cavity

    NASA Astrophysics Data System (ADS)

    Zhang, X. L.; Nguyen, T. Hung; Kahawita, R.

    Zusammenfassung In der Arbeit wird über die Ergebnisse einer numerischen Studie, betreffend die stationäre Konvektionsströmung und den stationären Wärmeübergang in einer rechteckigen, mit einem porösen, phasenveränderlichen Medium (PCM) verfüllten Kavität, berichtet. Den zwei vertikalen Berandungen der Kavität sind zwei, den Schmelzpunkt des PCM einschließende Temperaturen aufgeprägt, während die beiden horizontalen Berandungen adiabat gehalten werden. Das poröse Medium ist durch einen anisotropen Permeabilitätstensor charakterisiert, dessen Hauptachsen bezüglich des Gravitationsvektors beliebig orientiert sein können. Das Problem ist durch das Seitenverhältnis A, die Rayleigh-Zahl Ra, das Anisotropienverhältnis R und den Orientierungswinkel Θ des Permeabilitätstensor bestimmt. Hauptaugenmerk gilt dem Einfluß der anisotropen Permeabilität auf das Strömungsverhalten und den Wärme-übergang beim Phasenwechselprozeß flüssig/fest. Die Lösungsmethode basiert auf dem Kontrollvolumenprinzip in Verbindung mit der Landau-Transformation über welche das irreguläre Strömungsgebiet in ein rechteckiges abgebildet wird. Ergebnisse bezüglich Strömungsfeld, Temperaturverteilung, Phasengrenzenort und Wärmeübergang werden fürA=2,5Ra=40 0<=Θ<=π 0,25<=R<=4 mitgeteilt. Es zeigte sich, daß der Gleichgewichtszustand des Phasenwechselsprozesses fest/flüssig sowohl durch das Anisotropieverhältnis R als auch durch den Orientierungswinkel Θ des Permeabilitätstensors wesentlich beeinflußt werden kann. Zum einen existiert bei festgehaltenen ParameternA, Ra undR eine optimale Orientierung Θmax, bei der die Stromstärke, das Flüssigkeitsvolumen und der Wärmestrom Maximalwerte erreichen, während für Θmin=Θmax+π/2 Minimalwerte resultieren. Ist das anisotrope Medium entlang der Optimalrichtung Θmax orientiert, so ergibt sich zum anderen, daß eine Vergrößerung der in diese Richtung fallenden Permeabilitätskomponente die Stromstärke und den Wärmestrom in gleichem Maße erhöht, während eine Vergrößerung der anderen Permeabilitätskomponente nur vernachlässigbaren Einfluß hat. In den untersuchten Parameterbereichen lag die Optimalrichtung zwischen dem Gravitationsvektor und der Hauptstromrichtung.

  13. The first accurate description of an aurora

    NASA Astrophysics Data System (ADS)

    Schröder, Wilfried

    2006-12-01

    As technology has advanced, the scientific study of auroral phenomena has increased by leaps and bounds. A look back at the earliest descriptions of aurorae offers an interesting look into how medieval scholars viewed the subjects that we study.Although there are earlier fragmentary references in the literature, the first accurate description of the aurora borealis appears to be that published by the German Catholic scholar Konrad von Megenberg (1309-1374) in his book Das Buch der Natur (The Book of Nature). The book was written between 1349 and 1350.

  14. Robotic Lunar Landers for Science and Exploration

    NASA Technical Reports Server (NTRS)

    Cohen, B. A.; Bassler, J. A.; Hammond, M. S.; Harris, D. W.; Hill, L. A.; Kirby, K. W.; Morse, B. J.; Mulac, B. D.; Reed, C. L. B.

    2010-01-01

    The Moon provides an important window into the early history of the Earth, containing information about planetary composition, magmatic evolution, surface bombardment, and exposure to the space environment. Robotic lunar landers to achieve science goals and to provide precursor technology development and site characterization are an important part of program balance within NASA s Science Mission Directorate (SMD) and Exploration Systems Mission Directorate (ESMD). A Robotic Lunar Lan-der mission complements SMD's initiatives to build a robust lunar science community through R&A lines and increases international participation in NASA's robotic exploration of the Moon.

  15. Large-scale generic test stand for testing of multiple configurations of air filters utilizing a range of particle size distributions

    NASA Astrophysics Data System (ADS)

    Giffin, Paxton K.; Parsons, Michael S.; Unz, Ronald J.; Waggoner, Charles A.

    2012-05-01

    The Institute for Clean Energy Technology (ICET) at Mississippi State University has developed a test stand capable of lifecycle testing of high efficiency particulate air filters and other filters specified in American Society of Mechanical Engineers Code on Nuclear Air and Gas Treatment (AG-1) filters. The test stand is currently equipped to test AG-1 Section FK radial flow filters, and expansion is currently underway to increase testing capabilities for other types of AG-1 filters. The test stand is capable of producing differential pressures of 12.45 kPa (50 in. w.c.) at volumetric air flow rates up to 113.3 m3/min (4000 CFM). Testing is performed at elevated and ambient conditions for temperature and relative humidity. Current testing utilizes three challenge aerosols: carbon black, alumina, and Arizona road dust (A1-Ultrafine). Each aerosol has a different mass median diameter to test loading over a wide range of particles sizes. The test stand is designed to monitor and maintain relative humidity and temperature to required specifications. Instrumentation is implemented on the upstream and downstream sections of the test stand as well as on the filter housing itself. Representative data are presented herein illustrating the test stand's capabilities. Digital images of the filter pack collected during and after testing is displayed after the representative data are discussed. In conclusion, the ICET test stand with AG-1 filter testing capabilities has been developed and hurdles such as test parameter stability and design flexibility overcome.

  16. Application of intelligent sensors in the integrated systems health monitoring of a rocket test stand

    NASA Astrophysics Data System (ADS)

    Mahajan, Ajay; Chitikeshi, Sanjeevi; Utterbach, Lucas; Bandhil, Pavan; Figueroa, Fernando

    2006-05-01

    This paper describes the application of intelligent sensors in the Integrated Systems Health Monitoring (ISHM) as applied to a rocket test stand. The development of intelligent sensors is attempted as an integrated system approach, i.e. one treats the sensors as a complete system with its own physical transducer, A/D converters, processing and storage capabilities, software drivers, self-assessment algorithms, communication protocols and evolutionary methodologies that allow them to get better with time. Under a project being undertaken at the NASA Stennis Space Center, an integrated framework is being developed for the intelligent monitoring of smart elements associated with the rocket tests stands. These smart elements can be sensors, actuators or other devices. Though the immediate application is the monitoring of the rocket test stands, the technology should be generally applicable to the ISHM vision. This paper outlines progress made in the development of intelligent sensors by describing the work done till date on Physical Intelligent sensors (PIS) and Virtual Intelligent Sensors (VIS).

  17. Predicted stand volume for Eucalyptus plantations by spatial analysis

    NASA Astrophysics Data System (ADS)

    Latifah, Siti; Teodoro, RV; Myrna, GC; Nathaniel, CB; Leonardo, M. F.

    2018-03-01

    The main objective of the present study was to assess nonlinear models generated by integrating the stand volume growth rate to estimate the growth and yield of Eucalyptus. The primary data was done for point of interest (POI) of permanent sample plots (PSPs) and inventory sample plots, in Aek Nauli sector, Simalungun regency,North Sumatera Province,Indonesia. from December 2008- March 2009. Today,the demand for forestry information has continued to grow over recent years. Because many forest managers and decision makers face complex decisions, reliable information has become the necessity. In the assessment of natural resources including plantation forests have been widely used geospatial technology.The yield of Eucalyptus plantations represented by merchantable volume as dependent variable while factors affecting yield namely stands variables and the geographic variables as independent variables. The majority of the areas in the study site has stand volume class 0 - 50 m3/ha with 16.59 ha or 65.85 % of the total study site.

  18. Eight years of Conservation Agriculture-based cropping systems research in Eastern Africa to conserve soil and water and mitigate effects of climate change

    NASA Astrophysics Data System (ADS)

    Araya, Tesfay; Nyssen, Jan; Govaerts, Bram; Lanckriet, Sil; Baudron, Frédéric; Deckers, Jozef; Cornelis, Wim

    2014-05-01

    In Ethiopia, repeated plowing, complete removal of crop residues at harvest, aftermath grazing of crop fields and occurrence of repeated droughts have reduced the biomass return to the soil and aggravated cropland degradation. Conservation Agriculture (CA)-based resource conserving cropping systems may reduce runoff and soil erosion, and improve soil quality, thereby increasing crop productivity. Thus, a long-term tillage experiment has been carried out (2005 to 2012) on a Vertisol to quantify - among others - changes in runoff and soil loss for two local tillage practices, modified to integrate CA principles in semi-arid northern Ethiopia. The experimental layout was a randomized complete block design with three replications on permanent plots of 5 m by 19 m. The tillage treatments were (i) derdero+ (DER+) with a furrow and permanent raised bed planting system, ploughed only once at planting by refreshing the furrow from 2005 to 2012 and 30% standing crop residue retention, (ii) terwah+ (TER+) with furrows made at 1.5 m interval, plowed once at planting, 30% standing crop residue retention and fresh broad beds, and (iii) conventional tillage (CT) with a minimum of three plain tillage operations and complete removal of crop residues. All the plowing and reshaping of the furrows was done using the local ard plough mahresha and wheat, teff, barley and grass pea were grown. Glyphosate was sprayed starting from the third year onwards (2007) at 2 l ha-1 before planting to control pre-emergent weeds in CA plots. Runoff and soil loss were measured daily. Soil water content was monitored every 6 days. Significantly different (p<0.05) runoff coefficients averaged over 8 years were 14, 20 and 27% for DER+, TER+ and CT, respectively. Mean soil losses were 4 t ha-1 y-1 in DER+, 13 in TER+ and 18 in CT. Soil water storage during the growing season was constantly higher in CA-based systems compared with CT. A period of at least three years of cropping was required before improvements in crop yield became significant. Further, modeling of the sediment budgets shows that total soil loss due to sheet and rill erosion in cropland, when CA would be practiced at large scale in a 180 ha catchment, would reduce to 581 t y-1, instead of 1109 t y-1 under the current farmer practice. Using NASA/GISS Model II precipitation projections of IPCC scenario A1FI, CA is estimated to reduce soil loss and runoff and mitigate the effect of increased rainfall due to climate change. For smallholder farmers in semi-arid agro-ecosystems, CA-based systems constitute a field rainwater and soil conservation improvement strategy that enhances crop and economic productivity and reduces siltation of reservoirs, especially under changing climate. The reduction in draught power requirement would enable a reduction in oxen density and crop residue demand for livestock feed, which would encourage smallholder farmers to increase biomass return to the soil. Adoption of CA-based systems in the study area requires further work to improve smallholder farmers' awareness on benefits, to guarantee high standards during implementation and to design appropriate weed management strategies.

  19. Entwicklung von Landnutzungsszenarien für landschaftsökologische Fragestellungen

    NASA Astrophysics Data System (ADS)

    Fritsch, Uta

    2002-04-01

    Die Landschaften Mitteleuropas sind das Resultat einer langwierigen Geschichte menschlicher Landnutzung mit ihren unterschiedlichen, z.T. konkurrierenden Nutzungsansprüchen. Durch eine überwiegend intensive Beanspruchung haben die direkten und indirekten Auswirkungen der Landnutzung in vielen Fällen zu Umweltproblemen geführt. Die Disziplin der Landschaftsökologie hat es sich zur Aufgabe gemacht, Konzepte für eine nachhaltige Nutzung der Landschaft zu entwickeln. Eine wichtige Fragestellung stellt dabei die Abschätzung der möglichen Folgen von Landnutzungsänderungen dar. Für die Analyse der relevanten Prozesse in der Landschaft werden häufig mathematische Modelle eingesetzt, welche es erlauben die Landschaft unter aktuellen Verhältnissen oder hinsichtlich veränderter Rahmenbedingungen zu untersuchen. Die hypothetische Änderung der Landnutzung, die als Landnutzungsszenario bezeichnet wird, verkörpert eine wesentliche Modifikation der Rahmenbedingungen, weil Landnutzung mageblich Einfluss auf die natürlichen Prozesse der Landschaft nimmt. Während die Antriebskräfte einer solchen Änderung überwiegend von sozio-ökonomischen und politischen Entscheidungen gesteuert werden, orientiert sich die exakte Verortung der Landnutzungsänderungen an den naturräumlichen Bedingungen und folgt z.T. erkennbaren Regeln. Anhand dieser Vorgaben ist es möglich, räumlich explizite Landnutzungsszenarien zu entwickeln, die als Eingangsdaten für die Modellierung verschiedener landschaftsökologischer Fragestellungen wie z.B. für die Untersuchung des Einflusses der Landnutzung auf den Wasserhaushalt, die Erosionsgefahr oder die Habitatqualität dienen können. Im Rahmen dieser Dissertation wurde das rasterbasierte deterministische Allokationsmodell luck (Land Use Change Scenario Kit) für die explizite Verortung der Landnutzungsänderungen entwickelt. Es basiert auf den in der Landschaftsökologie üblichen räumlichen Daten wie Landnutzung, Boden sowie Topographie und richtet sich bei der Szenarienableitung nach den Leitbildern der Landschaftsplanung. Das Modell fut auf der Hypothese, dass das Landnutzungsmuster als Funktion seiner landschaftsökologischen Faktoren beschrieben werden kann. Das Veränderungspotenzial einer Landnutzungseinheit resultiert im Modell aus einer Kombination der Bewertung der relativen Eignung des Standortes für die jeweilige Landnutzung und der Berücksichtigung von Standorteigenschaften der umliegenden Nachbarn. Die Durchführung der Landnutzungsänderung im Modell ist iterativ angelegt, um den graduellen Prozess des Landschaftswandels nachvollziehen zu können. Als Fallbeispiel für die Anwendung solcher räumlich expliziten Landnutzungsszenarien dient die Fragestellung, inwieweit Landnutzungsänderungen die Hochwasserentstehung beeinflussen. Um den Einfluss auf die Hochwasserentstehung für jede der Landnutzungskategorien – bebaute, landwirtschaftlich genutzte und naturnahe Flächen – abschätzen zu können, wird im Landnutzungsmodell luck exemplarisch für jede Kategorie ein Teilmodell für die Veränderung von Landnutzung angeboten: 1) Ausdehnung der Siedlungsfläche: Dieses Teilmodell fut auf der Annahme, dass sich Siedlungen nur in direkter Nachbarschaft bereits bestehender Bebauung und bevorzugt entlang von Entwicklungsachsen ausbreiten. Steile Hangneigungen stellen für potenzielle Standorte ein Hemmnis bei der Ausbreitung dar. 2) Stilllegung von Grenzertragsackerflächen: Gemä der Hypothese, dass sich die Stilllegung von Ackerflächen an der potenziellen Ertragsleistung der Standorte orientiert, werden in diesem Teilmodell alle Ackerstandorte dahingehend bewertet und die Flächen mit der geringsten Leistungsfähigkeit stillgelegt. Bei homogenen Gebietseigenschaften werden die Stilllegungsflächen zufällig auf die Ackerfläche verteilt. 3) Etablierung von Schutzgebieten in Ufer- und Auenbereichen: Ausgehend von der These, dass sich entlang von Flüssen sensible Flächen befinden, deren Schutz positive Folgen für das Leistungsvermögen der Landschaft haben kann, werden in diesem Teilmodell schützenswerte Ufer- und Auenbereiche auf derzeit landwirtschaftlich genutzten Flächen ausgewiesen. Die Gröe der Schutzgebietsfläche orientiert sich an der Morphologie der umgebenden Landschaft. Die drei Teilmodelle wurden hinsichtlich der implizierten Hypothesen mit vielen unterschiedlichen Ansätzen validiert. Das Resultat dieser intensiven Analyse zeigt für jedes Teilmodell eine zufriedenstellende Tauglichkeit. Die Modellierung der Landnutzungsänderungen wurden in drei mesoskaligen Flusseinzugsgebieten mit einer Fläche zwischen 100 und 500 km² durchgeführt, die sich markant in ihrer Landnutzung unterscheiden. Besonderer Wert wurde bei der Gebietsauswahl darauf gelegt, dass eines der Gebiete intensiv landwirtschaftlich genutzt wird, eines dicht besiedelt und eines vorwiegend bewaldet ist. Im Hinblick auf ihre Relevanz für die vorliegende Fragestellung wurden aus bestehenden Landnutzungstrends die Szenarien für (1) die prognostizierte Siedlungsfläche für das Jahr 2010, (2) die möglichen Konsequenzen des EU-weiten Beschlusses der Agenda 2000 und (3) die Novelle des Bundesnaturschutzgesetzes aus dem Jahr 2001 abgeleitet. Jedes Szenario wurde mit Hilfe des Modells auf die drei Untersuchungsgebiete angewendet. Dabei wurden für die Siedlungsausdehnung in allen drei Gebieten realistische Landnutzungsmuster generiert. Einschränkungen ergeben sich bei der Suche nach Grenzertragsstilllegungsflächen. Hier hat unter homogenen Gebietseigenschaften die zufällige Verteilung von Flächen für die Stilllegung zu einem unrealistischen Ergebnis geführt. Die Güte der Schutzgebietsausweisung ist mageblich an die aktuelle Landnutzung der Aue und die Morphologie des Geländes gebunden. Die besten Ergebnisse werden erzielt, wenn die Flächen in den Ufer- und Auenbereichen mehrheitlich unter derzeitiger Ackernutzung stehen und der Flusslauf sich in das Relief eingetieft hat. Exemplarisch werden für jeden Landnutzungstrend die hydrologischen Auswirkungen anhand eines historischen Hochwassers beschrieben, aus denen jedoch keine pauschale Aussage zum Einfluss der Landnutzung abgeleitet werden kann. Die Studie demonstriert die Bedeutung des Landnutzungsmusters für die natürlichen Prozesse in der Landschaft und unterstreicht die Notwendigkeit einer räumlich expliziten Modellierung für landschaftsökologische Fragestellungen in der Mesoskala. Today′s landscapes in Central Europe are the result of a long history of land-use, which is characterised by many different demands. The immediate and long-term consequences of predominantly intensive land-use have led to environmental problems in many cases. Therefore it is necessary to develop strategies for the maintenance of landscape efficiency which take into account the different claims of utilisation. In this context the estimation of possible impacts of land-use changes represents an important statement of problem. For the analysis of the relevant processes within the landscape, it is common to apply mathematical models. Such models enable the investigation of the landscape under current conditions or with regard to modified boundary conditions. A hypothetic alteration of land-use, which is termed as land-use scenario, represents a substantial modification of the boundary conditions, because land-use exerts a strong influence on the natural processes of the landscape. While the driving forces are predominantly governed by socio-economical and political decisions, the exact location of land-use changes within the landscape mainly depends on the natural conditions and follows partly transparent rules. With these presumptions it is possible to develop land-use scenarios, which can serve as input data for the modelling of different questions of landscape ecology such as the influence of land-use on the water balance, the danger of erosion or the quality of habitat characteristics. In the context of this thesis the grid-based deterministic allocation model luck (Land Use Change Scenario Kit) for the allocation of land-use changes was developed. It is based upon the types of spatial data, which are commonly used in landscape ecology, such as information on land-use, soils as well as topography. The derivation of scenarios follows the approaches of landscape planning. The model is based upon the hypothesis, that land-use structure can be described as a function of its landscape ecological factors. The potential of a site to become subject to land-use changes, results from a combination of its local qualities and the site characteristics of its neighbourhood. Land-use change is realised iteratively in order to simulate the gradual process of changes in the landscape. The influence of land-use changes on flood generation serves as a case study to demonstrate the need for spatial explicit land-use scenarios. For each land-use category – built up areas, agriculturally used areas and natural/semi-natural land – the model luck offers a submodel for investigating the effect of land-use changes on flood generation: 1) Expansion of settlement area: This submodel is based upon the assumption that settlements spread only in the neighbourhood of already existing built-up areas and preferentially along infrastructural axes of development. Steep slopes inhibit the spreading on potential locations. 2) Set-aside of marginal yield sites under agricultural use: Setting-aside of arable land is based on the hypothesis that the selection of arable land to be set-aside depends on the potential yield efficiency of the locations. Within this submodel all fields under agricultural use are valued to that effect and the ones with the least productive efficiency are selected as set-aside locations. In case of homogeneous area qualities the set-aside locations are selected randomly. 3) Establishment of protected areas in waterside and ripearian areas: This submodel takes into consideration that the protection of sensitive areas along the river courses may have positive consequences for the efficiency of the landscape. Therefore this submodel establishes protection zones on waterside and ripearian sites under currently agricultural use, that might be of value for nature conservation. The size of the protection area depends on the morphology of the surrounding landscape. The three submodels were validated with respect to the implied hypotheses by the help of many different approaches. The result of this intensive analysis shows a satisfying suitability for each of the submodels. The simulation of land-use changes was carried out for three mesoscale river catchments with an area between 100 and 500 km². Special attention was paid to the fact that these areas should be markingly different in their land-use: One study area is predominantly under intensive agricultural use, one is densely populated and the third one is covered by forest in large parts of the area. With regard to their relevance to the onhand question from existing land-use trends scenarios were derived for the prognosed settlement area for the year 2010, for the possible consequences of the EU-wide agreement of Agenda 2000 and for the amending federal conservation law dating to the year 2001, which enhances the enlargement of protected areas. Each scenario was applied to the three study areas utilizing the model luck. For the expansion of the settlement areas in all three study areas realistic land-use patterns were generated. Limitations arose only in the context of the search for marginal yield fields. Here, the random distribution of areas to be set-aside under homogeneous conditions led to unrealistic results. The quality of the establishment of protected areas in waterside and ripearian areas is substantially bound to current land-use and the morphology of the area. The best results for this submodel are achieved if waterside and ripearian areas are mainly arable land and if the river has lowered its course into the morphology. The hydrological consequences are described exemplarily for each land-use trend with a historical flood event. The interpretation of the hydrographs does not allow global statements about the influence of land-use. The study demonstrates the significance of land-use pattern for the natural processes in the landscape and underlines the necessity of spatially explicit modelling for landscape ecological questions at the mesoscale.

  20. Sentinel-Lymphknoten-Biopsie des Melanoms mittels Indocyaningrün und "FOVIS"-System.

    PubMed

    Göppner, Daniela; Nekwasil, Stephan; Jellestad, Anne; Sachse, Alexander; Schönborn, Karl-Heinz; Gollnick, Harald

    2017-02-01

    Der Nachweis metastatischer Infiltrate im Sentinel-Lymphkoten (SLN) gilt als wesentlicher prognostischer Faktor des Melanoms. Alternativ zur Farbstoffmethode mit Patentblau zum Goldstandard der SLN-Biopsie (SLNB) mittels Radiokolloid wird die fluoreszenzoptische Darstellung mit Hilfe von Indocyaningrün (ICG) und Nahinfrarot (NIR)-Kamerasystem kommuniziert. Im Vergleich zur konventionellen Methode wurde die Wertigkeit des ICG-/NIR-Verfahrens in Abhängigkeit vom Body-Mass-Index (BMI) des Patienten und der Konzentration von ICG bezüglich der Visualisierung des Lymphabstroms und des SLNs untersucht. An zehn Patienten wurde die SLNB mittels Technetium-99m, Patentblau und ICG durchgeführt. Die Fluoreszenz-Darstellung von Lymphbahnen und SLN erfolgte in Echtzeit mittels der NIR-Kameratechnik "FOVIS". Je nach erzielter Bildqualität wurde ICG in einer Dosis von 0,25 mg bis 2,5 mg intrakutan appliziert. Neun der zehn SLN wurden fluoreszenzoptisch identifiziert (90 %), alle zehn radioaktiv (100 %), nur acht (80 %) mittels ICG-Grünfärbung bzw. Patenblau-Markierung. Transdermal wurde ein SLN dargestellt (10 %). In Korrelation zum BMI waren höhere ICG-Mengen, bis zu 2,5 mg intrakutan absolut, in der Darstellung der Lymphbahnen von Vorteil. Die SLN-Fluoreszenzmarkierung mit dem ICG/NIR-Kamera-System "FOVIS" stellt eine sichere Alternative zur Farbstoffmethode mit Patentblau ergänzend zur Radiokolloidmethode mit Technetium-99m dar. Weitere Studien zur optimalen Dosierung von ICG und transdermalen Bildgebung in Relation zum BMI sind notwendig. © 2017 Deutsche Dermatologische Gesellschaft (DDG). Published by John Wiley & Sons Ltd.

Top