Problems and research issues associated with the hybrid control of force and displacement

NASA Technical Reports Server (NTRS)

Paul, R. P.

1987-01-01

The hybrid control of force and position is basic to the science of robotics but is only poorly understood. Before much progress can be made in robotics, this problem needs to be solved in a robust manner. However, the use of hybrid control implies the existence of a model of the environment, not an exact model (as the function of hybrid control is to accommodate these errors), but a model appropriate for planning and reasoning. The monitored forces in position control are interpreted in terms of a model of the task as are the monitored displacements in force control. The reaction forces of the task of writing are far different from those of hammering. The programming of actions in such a modeled world becomes more complicated and systems of task level programming need to be developed. Sensor based robotics, of which force sensing is the most basic, implies an entirely new level of technology. Indeed, robot force sensors, no matter how compliant they may be, must be protected from accidental collisions. This implies other sensors to monitor task execution and again the use of a world model. This new level of technology is the task level, in which task actions are specified, not the actions of individual sensors and manipulators.

A Survey of Telecommunications Technology. Part I. President's Task Force on Communications Policy. Staff Paper One, Part I.

ERIC Educational Resources Information Center

Rostow, Eugene V.

A staff paper submitted to the President's Task Force on Communications Policy surveys the range of present and future innovations in communications techniques, assesses their feasibility and costs, and projects the rate and manner in which they will be deployed in the future. In general, the many technological possibilities--including…

New Era for Libraries. A Report from the Iowa Blue Ribbon Task Force on Libraries.

ERIC Educational Resources Information Center

Iowa State Dept. of Cultural Affairs, Des Moines. State Library.

The Director of the Department of Cultural Affairs appointed a task force, to be chaired by the State Librarian of Iowa, to evaluate technologies available for libraries and potential uses for the technologies deemed valuable; discuss problems from the viewpoint of the library user in the establishment of cooperative programs; and develop a…

An evaluation of nursing tasks.

PubMed

Baptiste, Andrea

2011-01-01

Functional capacity evaluations have been criticized as being too general in theory and not being accurate enough to determine what tasks an employee can perform. This paper will describe results of a descriptive study that was conducted in a laboratory setting to objectively determine the physical demands of patient transfer tasks performed by nurses. Fifty three tasks were analyzed and broken down into sub-tasks to quantify the peak force required to perform each sub-task in order to determine which tasks pose healthcare workers at highest risk of injury. Dissecting the transfer task into segments allows us to see which part of the task requires high forces on the part of the caregiver. The task can then be modified to eliminate the risk of injury to the caregiver. This modification can be accomplished by using healthcare technology, such as floor based or overhead lifts, friction reducing devices, sit to stand lifts, properly designed slings, and motorized beds/trolleys. Technological solutions are available for some of these high risk tasks and should be implemented where applicable to reduce the force demand and eliminate or reduce the risk of injury to healthcare workers in nursing.

Science and Technology Policymaking: A Primer

DTIC Science & Technology

2008-04-22

the federal government CRS-2 4 U.S. Constitution, Article I, Section 8, Clause 8. 5 Jeffrey K. Stine, A History of Science Policy in the United States...Stine, A History of Science Policy in the United States, 1940-1985 , Report for the House Committee on Science and Technology Task Force on Science...K. Stine, A History of Science Policy in the United States, 1940-1985 , Report for the House Committee on Science and Technology Task Force on

Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bragg-Sitton, Shannon Michelle

The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, parametric studies, and selection of system codes. Themore » Cladding and Core Materials and Fuel Concepts task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment Task Force is chaired by Shannon Bragg-Sitton (INL), while the Cladding Task Force will be chaired by a representative from France (Marie Moatti, Electricite de France [EdF]) and the Fuels Task Force will be chaired by a representative from Japan (Masaki Kurata, Japan Atomic Energy Agency [JAEA]). This report provides an overview of the Systems Assessment Task Force charter and status of work accomplishment.« less

Defense Science Board Task Force Report on Cyber Defense Management

DTIC Science & Technology

2016-09-01

manage cyber security is often a verymanual and labor intensive process. When a crisis hits, DoD responses range from highly automatedand instrumented...DSB Task Force Report on Cyber Defense Management September 2016 (U) This page intentionally blank REPORT OF THE DEFENSE SCIENCE BOARD STUDY ON Cyber ...DEFENSE FOR ACQUISITION, TECHNOLOGY & LOGISTICS SUBJECT: Final Report of the Defense Science Board (DSB) Task Force on Cyber Defense Management I am

Task Force on Women, Minorities and the Handicapped in Science and Technology: Executive Session. Report of the Proceedings (Atlanta, Georgia, March 3, 1988).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Task Force on Women, Minorities and the Handicapped in Science and Technology: Public Hearing. Report of the Proceedings (Kansas City, Missouri, December 1, 1987).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Task Force on Women, Minorities and the Handicapped in Science and Technology: Public Hearing. Report of the Proceedings (Albuquerque, New Mexico, September 22, 1987).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Task Force on Women, Minorities and the Handicapped in Science and Technology: Public Hearing. Report of the Proceedings (Baltimore, Maryland, May 4, 1988).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Task Force on Women, Minorities and the Handicapped in Science and Technology: Executive Session. Report of the Proceedings (Washington, D.C., May 24, 1988).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Task Force on Women, Minorities and the Handicapped in Science and Technology: Public Hearing. Report of the Proceedings (Cambridge, Massachusetts, April 7, 1988).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Task Force on Women, Minorities and the Handicapped in Science and Technology: Public Meeting. Report of the Proceedings (Albuquerque, New Mexico, September 27, 1987).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Task Force on Women, Minorities and the Handicapped in Science and Technology: Executive Session. Report of the Proceedings (Cambridge, Massachusetts, April 8, 1988).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Federal Industrial Innovation Policy : A Review of Congressional and Task Force Activity

DOT National Transportation Integrated Search

1980-12-01

The issue of technological innovation, and the appropriate role of government policy, have been the subjects of many task forces and special committees. A retrospective analysis was carried out to identify changing perspectives of the causes of decli...

Status Report on Activities of the Systems Assessment Task Force, OECD-NEA Expert Group on Accident Tolerant Fuels for LWRs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bragg-Sitton, Shannon Michelle

The Organization for Economic Cooperation and Development /Nuclear Energy Agency (OECD/NEA) Nuclear Science Committee approved the formation of an Expert Group on Accident Tolerant Fuel (ATF) for LWRs (EGATFL) in 2014. Chaired by Kemal Pasamehmetoglu, INL Associate Laboratory Director for Nuclear Science and Technology, the mandate for the EGATFL defines work under three task forces: (1) Systems Assessment, (2) Cladding and Core Materials, and (3) Fuel Concepts. Scope for the Systems Assessment task force (TF1) includes definition of evaluation metrics for ATF, technology readiness level definition, definition of illustrative scenarios for ATF evaluation, and identification of fuel performance and systemmore » codes applicable to ATF evaluation. The Cladding and Core Materials (TF2) and Fuel Concepts (TF3) task forces will identify gaps and needs for modeling and experimental demonstration; define key properties of interest; identify the data necessary to perform concept evaluation under normal conditions and illustrative scenarios; identify available infrastructure (internationally) to support experimental needs; and make recommendations on priorities. Where possible, considering proprietary and other export restrictions (e.g., International Traffic in Arms Regulations), the Expert Group will facilitate the sharing of data and lessons learned across the international group membership. The Systems Assessment task force is chaired by Shannon Bragg-Sitton (Idaho National Laboratory [INL], U.S.), the Cladding Task Force is chaired by Marie Moatti (Electricite de France [EdF], France), and the Fuels Task Force is chaired by a Masaki Kurata (Japan Atomic Energy Agency [JAEA], Japan). The original Expert Group mandate was established for June 2014 to June 2016. In April 2016 the Expert Group voted to extend the mandate one additional year to June 2017 in order to complete the task force deliverables; this request was subsequently approved by the Nuclear Science Committee. This report provides an update on the status Systems Assessment Task Force activities.« less

The Large Area Crop Inventory Experiment (LACIE). Part 3: A systematic approach to the practical application of remote-sensing technology

NASA Technical Reports Server (NTRS)

Murphy, J. D.; Dideriksen, R. I.

1975-01-01

The application of remote sensing technology by the U.S. Department of Agriculture (USDA) is examined. The activities of the USDA Remote-Sensing User Requirement Task Force which include cataloging USDA requirements for earth resources data, determining those requirements that would return maximum benefits by using remote sensing technology and developing a plan for acquiring, processing, analyzing, and distributing data to satisfy those requirements are described. Emphasis is placed on the large area crop inventory experiment and its relationship to the task force.

Public Hearing: Report of the Proceedings of a Public Hearing of the Task Force on Women, Minorities and the Handicapped in Science and Technology (Atlanta, Georgia, March 2, 1988).

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

Tera-node Network Technology (Task 3) Scalable Personal Telecommunications

DTIC Science & Technology

2000-03-14

Simulation results of this work may be found in http://north.east.isi.edu/spt/ audio.html. 6. Internet Research Task Force Reliable Multicast...Adaptation, 4. Multimedia Proxy Caching, 5. Experiments with the Rate Adaptation Protocol (RAP) 6. Providing leadership and innovation to the Internet ... Research Task Force (IRTF) Reliable Multicast Research Group (RMRG) 1. End-to-end Architecture for Quality-adaptive Streaming Applications over the

75 FR 77934 - Small Business Information Security Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-14

... on them. The Task Force has until the end of 2013 to complete the report but it is hoped that the... computing technology industry itself. Mr. Aaron Berstein then volunteered to contact Microsoft to inquire into the possibility of Microsoft providing an online collaborative space software tool for use...

NCI-FDA Interagency Oncology Task Force Workshop Provides Guidance for Analytical Validation of Protein-based Multiplex Assays | Office of Cancer Clinical Proteomics Research

Cancer.gov

An NCI-FDA Interagency Oncology Task Force (IOTF) Molecular Diagnostics Workshop was held on October 30, 2008 in Cambridge, MA, to discuss requirements for analytical validation of protein-based multiplex technologies in the context of its intended use. This workshop developed through NCI's Clinical Proteomic Technologies for Cancer initiative and the FDA focused on technology-specific analytical validation processes to be addressed prior to use in clinical settings. In making this workshop unique, a case study approach was used to discuss issues related to

General Aviation Task Force report

NASA Technical Reports Server (NTRS)

1993-01-01

General aviation is officially defined as all aviation except scheduled airlines and the military. It is the only air transportation to many communities throughout the world. In order to reverse the recent decline in general aviation aircraft produced in the United States, the Task Force recommends that NASA provide the expertise and facilities such as wind tunnels and computer codes for aircraft design. General aviation manufacturers are receptive to NASA's innovations and technological leadership and are expected to be effective users of NASA-generated technologies.

The future workforce in cancer prevention: advancing discovery, research, and technology.

PubMed

Newhauser, Wayne D; Scheurer, Michael E; Faupel-Badger, Jessica M; Clague, Jessica; Weitzel, Jeffrey; Woods, Kendra V

2012-05-01

As part of a 2-day conference on October 15 and 16, 2009, a nine-member task force composed of scientists, clinicians, educators, administrators, and students from across the USA was formed to discuss research, discovery, and technology obstacles to progress in cancer prevention and control, specifically those related to the cancer prevention workforce. This article summarizes the task force's findings on the current state of the cancer prevention workforce in this area and its needs for the future. The task force identified two types of barriers impeding the current cancer prevention workforce in research, discovery, and technology from reaching its fullest potential: (1) limited cross-disciplinary research opportunities with underutilization of some disciplines is hampering discovery and research in cancer prevention, and (2) new research avenues are not being investigated because technology development and implementation are lagging. Examples of impediments and desired outcomes are provided in each of these areas. Recommended solutions to these problems are based on the goals of enhancing the current cancer prevention workforce and accelerating the pace of discovery and clinical translation.

Conference-EC-US Task Force Joint US-EU Workshop on Metabolomics and Environmental Biotechnology

DOE Office of Scientific and Technical Information (OSTI.GOV)

PI: Lily Y. Young

2009-06-04

Since 1990, the EC-US Task Force on Biotechnology Research has been coordinating transatlantic efforts to guide and exploit the ongoing revolution in biotechnology and the life sciences. The Task Force was established in June 1990 by the European Commission and the White House Office of Science and Technology Policy. The Task Force has acted as an effective forum for discussion, coordination, and development of new ideas for the last 18 years. Task Force members are European Commission and US Government science and technology administrators who meet annually to enhance communication across the Atlantic, and to encourage collaborative research. Through sponsoringmore » workshops, and other activities, the Task Force also brings together scientific leaders and early career researchers from both sides of the Atlantic to forecast research challenges and opportunities and to promote better links between researchers. Over the years, by keeping a focus on the future of science, the Task Force has played a key role in establishing a diverse range of emerging scientific fields, including biodiversity research, neuroinformatics, genomics, nanobiotechnology, neonatal immunology, transkingdom molecular biology, biologically-based fuels, and environmental biotechnology. The EC-US Task Force has sponsored a number of Working Groups on topics of mutual transatlantic interest. The idea to create a Working Group on Environmental Biotechnology research was discussed in the Task Force meeting of October 1993. The EC-US Working Group on Environmental Biotechnology set as its mission 'To train the next generation of leaders in environmental biotechnology in the United States and the European Union to work collaboratively across the Atlantic.' Since 1995, the Working Group supported three kinds of activities, all of which focus one early career scientists: (1) Workshops on the use of molecular methods and genomics in environmental biotechnology; (2) Short courses with theoretical, laboratory and field elements; and (3) Short term exchange fellowships. The short term exchange fellowships were created to enable young scientists to develop collaborations with colleagues across the Atlantic and to learn a new skill or expertise in the area of environmental biotechnology.« less

The Effects of Technological Change on the Labor Force. Hearing before the Technology Policy Task Force of the Committee on Science, Space, and Technology. House of Representatives, One Hundredth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

This document reports on a congressional hearing on the impact of technological advancements on employment. Testimony includes statements and prepared statements from individuals representing conservation of human resources, Columbia University; United Steelworkers of America; The Brookings Institution; Xerox Corporation; and Panel on Technology…

Technology and Employment. Joint Hearings before the Subcommittee on Science, Research and Technology of the Committee on Science and Technology and the Task Force on Education and Employment of the Committee on the Budget, U.S. House of Representatives, Ninety-Eighth Congress, First Session (June 7, 9, 10, 14-16, and 23, 1983).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science and Technology.

These are transcripts of joint Congressional hearings on technology and employment. Objectives stated for the hearings are to identify how technology is leading to changes in the nation's work force and work environment and to make recommendations for governmental action that will ease the adjustment of the work force and workplace to technology,…

Metallurgical Evaluations of Depainting Processes on Aluminum Substrate

NASA Technical Reports Server (NTRS)

McGill, Preston

1999-01-01

In December 1993, the Environmental Protection Agency (EPA) Emission Standards Division and the National Aeronautics and Space Administration's (NASA's) Marshall Space Flight Center (MSFC) signed an Interagency Agreement (IA) initiating a task force for the technical assessment of alternative technologies for aerospace depainting operations. The United States Air Force (USAF) joined the task force in 1994. The mandates of the task force were: (1) To identify available alternative depainting systems that do not rely on methylene chloride or other ozone-depleting, chlorinated, and volatile organic carbon solvents. (2) To determine the viability, applicability, and pollution prevention potential of each identified alternative. (3) To address issues of safety, environmental impact, reliability, and maintainability. Through a Technical Implementation Committee (TIC), the task force selected and evaluated eight alternative paint stripping technologies: chemical stripping, carbon dioxide (CO2) blasting, xenon flashlamp and CO2 coatings removal (FLASHJET(R)), CO2 laser stripping, plastic media blasting (PMB), sodium bicarbonate wet stripping, high-pressure water blasting (WaterJet), and wheat starch abrasive blasting (Enviro-Strip(R)). (The CO2 blasting study was discontinued after the first depainting sequence.) This final report presents the results of the Joint EPA/NASA/USAF Interagency Depainting Study. Significant topics include: (1) Final depainting sequence data for the chemical stripping, PMB, sodium bicarbonate wet stripping, and WaterJet processes. (2) Strip rates for all eight technologies. (3) Sequential comparisons of surface roughness measurements for the seven viable depainting technologies. (4) Chronological reviews of and lessons learned in the conduct of all eight technologies. (5) An analysis of the surface roughness trends for each of the seven technologies. (6) Metallurgic evaluations of panels Summaries of corrosion and hydrogen embrittlement evaluations of chemical stripping panels, detailed descriptions of which appear in previous reports. Because the requirements for alternative systems are diverse, as are initial setup, training, and on-going operational considerations, this study does not recommend a particular product or process. Users of this study will draw their own conclusions from the data presented herein.

A Survey of Telecommunications Technology. Part II. President's Task Force on Communications Policy. Staff Paper One, Part II.

ERIC Educational Resources Information Center

Rostow, Eugene V.

The document contains the final four appendices to a staff paper submitted to the President's Task Force on Communications Policy. "The Digital Loop" describes changes in urban telecommunications which are predicted for 1970-80, considering three possible systems: paired wires with single analog signals (present telephones), coaxial…

APA (American Psychological Association) Task Force on Privacy and Confidentiality. Final Report.

ERIC Educational Resources Information Center

American Psychological Association, Washington, DC.

This Task Force on Privacy and Confidentiality is intended to call attention to the central role of the right to privacy in the maintenance and enrichment of a free society. The psychological implications of the changing views of privacy as reflected in political, social, and technological developments are discussed, and recommendations relating…

The Domestic Telecommunications Carrier Industry. Part I. President's Task Force on Communications Policy. Staff Paper Five.

ERIC Educational Resources Information Center

Rostow, Eugene V.

A staff paper submitted to the President's Task Force on Communications Policy recommends that public policy ensure an integrated structure in the telecommunications industry, while fostering limited competition to keep the system responsive to new technology and to consumer demands. The present system of regulated monopoly for companies supplying…

Engineering and technology measures to improve large truck safety : state of the practice in Virginia.

DOT National Transportation Integrated Search

2003-01-01

In response to a request by Frank S. Wolf and Jo Ann Davis of the U.S. House of Representatives, Governor Mark Warner formed a Special Task Force on Truck Safety in the fall of 2002. The objective of the task force was to examine ways to reduce the n...

Improving aircraft energy efficiency

NASA Technical Reports Server (NTRS)

Povinelli, F. P.; Klineberg, J. M.; Kramer, J. J.

1976-01-01

Investigations conducted by a NASA task force concerning the development of aeronautical fuel-conservation technology are considered. The task force estimated the fuel savings potential, prospects for implementation in the civil air-transport fleet, and the impact of the technology on air-transport fuel use. Propulsion advances are related to existing engines in the fleet, to new production of current engine types, and to new engine designs. Studies aimed at the evolutionary improvement of aerodynamic design and a laminar flow control program are discussed and possibilities concerning the use of composite structural materials are examined.

The Federal Government and the University Research Infrastructure. Science Policy Study--Hearings Volume 6. Hearings before the Task Force on Science Policy of the Committee on Science and Technology, House of Representatives. Ninety-Ninth Congress, First Session (May 21, 22, September 5, 1985).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science and Technology.

This publication documents the testimony and discussion before the United States House of Representatives' Task Force on Science Policy during three days in 1985. It includes the text of the prepared statements by: (1) Dr. Bernadine Healy (Office of Science and Technology Policy, Executive Office of the President); (2) Henry G. Kirschenmann, Jr.…

Defense Science Board Task Force on The Manufacturing Technology Program: A Key to Affordably Equipping the Future Force

DTIC Science & Technology

2006-02-01

technology for cost and risk reduction of products, software, and processes; long-term, multi-Service needs; and disruptive technologies , both...initiatives and for disruptive technologies , the Office of the Secretary of Defense (OSD) can better promote the importance and value of the program...multi- Service programs, research in “ disruptive ” technologies , and SBIR programs. Balance current, near term, and future needs as well as small and

Reciprocity-based experimental determination of dynamic forces and moments: A feasibility study

NASA Technical Reports Server (NTRS)

Ver, Istvan L.; Howe, Michael S.

1994-01-01

BBN Systems and Technologies has been tasked by the Georgia Tech Research Center to carry Task Assignment No. 7 for the NASA Langley Research Center to explore the feasibility of 'In-Situ Experimental Evaluation of the Source Strength of Complex Vibration Sources Utilizing Reciprocity.' The task was carried out under NASA Contract No. NAS1-19061. In flight it is not feasible to connect the vibration sources to their mounting points on the fuselage through force gauges to measure dynamic forces and moments directly. However, it is possible to measure the interior sound field or vibration response caused by these structureborne sound sources at many locations and invoke principle of reciprocity to predict the dynamic forces and moments. The work carried out in the framework of Task 7 was directed to explore the feasibility of reciprocity-based measurements of vibration forces and moments.

Recent Investments by NASA's National Force Measurement Technology Capability

NASA Technical Reports Server (NTRS)

Commo, Sean A.; Ponder, Jonathan D.

2016-01-01

The National Force Measurement Technology Capability (NFMTC) is a nationwide partnership established in 2008 and sponsored by NASA's Aeronautics Evaluation and Test Capabilities (AETC) project to maintain and further develop force measurement capabilities. The NFMTC focuses on force measurement in wind tunnels and provides operational support in addition to conducting balance research. Based on force measurement capability challenges, strategic investments into research tasks are designed to meet the experimental requirements of current and future aerospace research programs and projects. This paper highlights recent and force measurement investments into several areas including recapitalizing the strain-gage balance inventory, developing balance best practices, improving calibration and facility capabilities, and researching potential technologies to advance balance capabilities.

An Operational Utility Assessment: Measuring the Effectiveness of the Joint Concept Technology Demonstration (JCTD), Joint Forces Protection Advance Security System (JFPASS)

DTIC Science & Technology

2008-12-01

time- on-task in deploying a patrol force, for example. In its most basic form, an FOB consists of a ring of barbed wire around a position with a...Modernizing The Marine Corps’ CH- 53 Super Stallion Helicopter,” Thesis, NPS (December 2001). HIGH LEVEL OF IMPORTANCE LOW 62 TASKS

Impact of Collaborative Tools Utilization on Group Performance in University Students

ERIC Educational Resources Information Center

Hidayanto, Achmad Nizar; Setyady, Stella Tantra

2014-01-01

Nowadays the growth of technology influences the changes in group collaboration's process either for the professional or for the students. The requirement of interaction in group collaboration while doing task forces the students to schedule their meeting in order to finish the task given. So the technology starts to influence the process of group…

0-6803 : technology task force.

DOT National Transportation Integrated Search

2013-12-01

Texas 83rd Legislature charged the Texas Department : of Transportation (TxDOT) with examining and : evaluating innovative transportation technologies to : decrease costs, reduce traffic congestion, enhance : safety, and increase economic producti...

A Human Systems Integration Analysis of the Army Suicide Prevention Program

DTIC Science & Technology

2013-06-01

ABBREVIATIONS ACE Ask/Care/Escort ACER Army Suicide Event Report ACS Army Community Services AHLTA Armed Forces Health Longitudinal Technology ...Assess Risk and Resilience in Soldiers T2 The National Center for Telehealth and Technology TAU treatment as usual TFPS Task Force on the... Technology (T2), 2010). Despite increases in BH service usage during this time, suicide numbers still showed evidence of an obvious problem. C

Sectoral Skills Needs: The Role of Universities. Task Force on Labour Market Issues: Office for Partnerships for Advanced Skills.

ERIC Educational Resources Information Center

Council of Ontario Universities, Toronto.

This report analyzes the role of the Task Force on Labour Market Issues of the Council of Ontario Universities in meeting industry skill needs, focusing particularly on three sectors: biotechnology, culture, and software/information technology. Also included are the findings of an earlier study on the skill needs and training requirements in the…

The Information Infrastructure: Reaching Society's Goals. A Report of the Information Infrastructure Task Force Committee on Applications and Technology.

ERIC Educational Resources Information Center

National Inst. of Standards and Technology, Gaithersburg, MD.

Intended for public comment and discussion, this document is the second volume of papers in which the Information Infrastructure Task Force has attempted to articulate in clear terms, with sufficient detail, how improvements in the National Information Infrastructure (NII) can help meet other social goals. These are not plans to be enacted, but…

E3: Organizing for Environment, Energy, and the Economy in the Executive Branch of the U.S. Government.

ERIC Educational Resources Information Center

Carnegie Commission on Science, Technology, and Government, New York, NY.

A Task Force created in 1989 was asked to provide the Carnegie Commission on Science, Technology, and Government with a brief statement outlining both functional needs in environment and energy and institutional forms to enhance the government's capability to address the emergent issues. One key need the Task Force has identified is for a greater…

Cyber Defense Management

DTIC Science & Technology

2016-09-01

manage cyber security is often a verymanual and labor intensive process. When a crisis hits, DoD responses range from highly automatedand instrumented...DSB Task Force Report on Cyber Defense Management September 2016 (U) This page intentionally blank REPORT OF THE DEFENSE SCIENCE BOARD STUDY ON Cyber ...DEFENSE FOR ACQUISITION, TECHNOLOGY & LOGISTICS SUBJECT: Final Report of the Defense Science Board (DSB) Task Force on Cyber Defense Management I am

Training L2 Learners to Use Facebook Appropriately and Effectively

ERIC Educational Resources Information Center

Prichard, Caleb

2013-01-01

Recognizing how essential communication technologies have become to language learners, the TESOL Technology Standards Task Force set three goals for learners (Healey et al., 2011): 1) demonstrating skills in technology for a multilingual world, 2) using technology appropriately and ethically, and 3) using and evaluating technology for language…

Plan for conducting an international machine tool task force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, G.P.; McClure, E.R.; Schuman, J.F.

1978-08-28

The basic objectives of the Machine Tool Task Force (MTTF) are to characterize and summarize the state of the art of cutting machine tool technology and to identify promising areas of future R and D. These goals will be accomplished with a series of multidisciplinary teams of prominent experts and individuals experienced in the specialized technologies of machine tools or in the management of machine tool operations. Experts will be drawn from all areas of the machine tool community: machine tool users or buyer organizations, builders, and R and D establishments including universities and government laboratories, both domestic and foreign.more » A plan for accomplishing this task is presented. The area of machine tool technology has been divided into about two dozen technology subjects on which teams of one or more experts will work. These teams are, in turn, organized into four principal working groups dealing, respectively, with machine tool accuracy, mechanics, control, and management systems/utilization. Details are presented on specific subjects to be covered, the organization of the Task Force and its four working groups, and the basic approach to determining the state of the art of technology and the future directions of this technology. The planned review procedure, the potential benefits, our management approach, and the schedule, as well as the key participating personnel and their background are discussed. The initial meeting of MTTF members will be held at a plenary session on October 16 and 17, 1978, in Scottsdale, AZ. The MTTF study will culminate in a conference on September 1, 1980, in Chicago, IL, immediately preceeding the 1980 International Machine Tool Show. At this time, our results will be released to the public; a series of reports will be published in late 1980.« less

Modeling good research practices--overview: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force-1.

PubMed

Caro, J Jaime; Briggs, Andrew H; Siebert, Uwe; Kuntz, Karen M

2012-01-01

Models-mathematical frameworks that facilitate estimation of the consequences of health care decisions-have become essential tools for health technology assessment. Evolution of the methods since the first ISPOR modeling task force reported in 2003 has led to a new task force, jointly convened with the Society for Medical Decision Making, and this series of seven papers presents the updated recommendations for best practices in conceptualizing models; implementing state-transition approaches, discrete event simulations, or dynamic transmission models; dealing with uncertainty; and validating and reporting models transparently. This overview introduces the work of the task force, provides all the recommendations, and discusses some quandaries that require further elucidation. The audience for these papers includes those who build models, stakeholders who utilize their results, and, indeed, anyone concerned with the use of models to support decision making.

Project LASER: Learning about science, engineering, and research

NASA Technical Reports Server (NTRS)

1990-01-01

The number of American students entering science and engineering careers and their ranking in comparison with other countries is on the decline. This decline has alarmed Congress which, in 1987, established a Task Force on Women, Minorities, and the Handicapped in Science and Technology to define the problem and find solutions. If left unchanged, the task force has warned that the prospects for maintaining an advanced industrial society will diminish. NASA is supportive of the six goals outlined by the task force, which are paraphrase herein, and is carefully assessing its education programs to identify those offering the greatest potential for achieving the task force objectives with a reasonable range of resources. A major initiative is under way on behalf of NASA at its Marshall Space Flight Center, where highly effective features of several NASA education programs along with innovations are being integrated into a comprehensive pilot program. This program, dubbed Project LASER, is discussed.

0-6803 : new technology task force : phase II.

DOT National Transportation Integrated Search

2013-12-01

Texas 83rd Legislature charged the Texas Department : of Transportation (TxDOT) with examining and : evaluating innovative transportation technologies for : purposes of reducing costs, reducing traffic congestion, : enhancing safety, and increasin...

ESHRE Task Force on Ethics and Law 10: surrogacy.

PubMed

Shenfield, F; Pennings, G; Cohen, J; Devroey, P; de Wert, G; Tarlatzis, B

2005-10-01

This 10th statement of the Task Force on Ethics and Law considers ethical questions specific to varied surrogacy arrangements. Surrogacy is especially complex as the interests of the intended parents, the surrogate, and the future child may differ. It is concluded that surrogacy is an acceptable method of assisted reproductive technology of the last resort for specific medical indications, for which only reimbursement of reasonable expenses is allowed.

78 FR 16675 - First Technology Transitions; Policy Task Force Workshop

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... FEDERAL COMMUNICATIONS COMMISSION [GN Docket No. 13-5; DA 13-383] First Technology Transitions... workshops to analyze technology transitions from narrowband to broadband; from time-division multiplexing... capabilities of wireless and wireline (copper, fiber and coax) technologies today and in the future. 11:30 a.m...

NASA AETC Test Technology Subproject

NASA Technical Reports Server (NTRS)

Bell, James

2017-01-01

Funds directed to improve measurement capabilities (pressure, force, flow, and temperature), test techniques and processes, and develop technologies critical to meeting NASA research needs and applicable to a multitude of facilities. Primarily works by funding small ($40K - $400K) tasks which result in a demonstration or initial capability of a new technology in an AETC facility.TT research and development tasks are generally TRL 3-6; they should be things which work in small scale or lab environments but need further development for use in production facilities.TT differs from CA in its focus on smaller-scale tasks and on instrumentation. Technologies developed by TT may become CA projects in order be fully realized within a facility.

The Effects of Technological Change on the Labor Force. Hearing Summary. Report prepared for the Technology Policy Task Force Transmitted to the Committee on Science, Space, and Technology. House of Representatives, One Hundredth Congress, First Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science, Space and Technology.

This report summarizes a hearing to examine the factors contributing to pressures on United States workers and to suggest government, industry, and labor policies. Section I is an introduction. Section II identifies the panelists: Director, Conservation of Human Resources, Columbia University; President, United Steel Workers of America; Senior…

The Future Workforce in Cancer Prevention: Advancing Discovery, Research, and Technology

PubMed Central

Newhauser, Wayne. D.; Scheurer, Michael. E.; Faupel-Badger, Jessica. M.; Clague, Jessica.; Weitzel, Jeffrey.; Woods, Kendra. V.

2012-01-01

As part of a 2 day conference on October 15 and 16, 2009, a nine-member task force composed of scientists, clinicians, educators, administrators, and students from across the United States was formed to discuss research, discovery, and technology obstacles to progress in cancer prevention and control, specifically those related to the cancer prevention workforce. This article summarizes the task force’s findings on the current state of the cancer prevention workforce in this area and its needs for the future. The task force identified two types of barriers impeding the current cancer prevention workforce in research, discovery, and technology from reaching its fullest potential: 1) limited cross-disciplinary research opportunities with underutilization of some disciplines is hampering discovery and research in cancer prevention, and 2) new research avenues are not being investigated because technology development and implementation are lagging. Examples of impediments and desired outcomes are provided in each of these areas. Recommended solutions to these problems are based on the goals of enhancing the current cancer prevention workforce and accelerating the pace of discovery and clinical translation. PMID:22314794

Results from Five Task Forces Appointed by the American Council of Learned Societies and the Council on Library and Information Resources. Scholarship, Instruction, and Libraries at the Turn of the Century.

ERIC Educational Resources Information Center

Council on Library and Information Resources, Washington, DC.

The American Council of Learned Societies and the Council on Library and Information Resources appointed 36 scholars, librarians, and leaders of various academic enterprises to five task forces "to consider changes in the process of scholarship and instruction that will result from the use of digital technology and to make recommendations to…

An Investigation of Technologies for Hazardous Sludge Reduction at AFLC (Air Force Logistics Command) Industrial Waste Treatment Plants. Volume 1. Sodium Borohydride Treatment and Sludge Handling Technologies.

DTIC Science & Technology

1983-12-01

ql.udge treatment studies, and preparation of preliminary designs . First Lieutenant James Aldrich was the RDV Project Officer. This technical report has...METAL REMOVA STUDY.. . .. .. .. . . .. 51 VI INVESTIGATING SLUDGE TREATMENT TECHNOLOGIES . 76 VII PROTOTYPE DESIGNS . . . . . . . . . . . . . . 98 viii...Task V was directed at developing basic design and cost data for prototype systems that employ the most promising methods developed under Tasks III and

Machine tool task force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, G.P.

1980-10-22

The Machine Tool Task Force (MTTF) is a multidisciplined team of international experts, whose mission was to investigate the state of the art of machine tool technology, to identify promising future directions of that technology for both the US government and private industry, and to disseminate the findings of its research in a conference and through the publication of a final report. MTTF was a two and one-half year effort that involved the participation of 122 experts in the specialized technologies of machine tools and in the management of machine tool operations. The scope of the MTTF was limited tomore » cutting-type or material-removal-type machine tools, because they represent the major share and value of all machine tools now installed or being built. The activities of the MTTF and the technical, commercial and economic signifiance of recommended activities for improving machine tool technology are discussed. (LCL)« less

Nailing Digital Jelly to a Virtual Tree: Tracking Emerging Technologies for Learning

ERIC Educational Resources Information Center

Serim, Ferdi; Schrock, Kathy

2008-01-01

Reliable information on emerging technologies for learning is as vital as it is difficult to come by. To meet this need, the International Society for Technology in Education organized the Emerging Technologies Task Force. Its goal is to create a database of contributions from educators highlighting their use of emerging technologies to support…

2006 AAHA canine vaccine guidelines.

PubMed

Paul, Michael A; Carmichael, Leland E; Childers, Henry; Cotter, Susan; Davidson, Autumn; Ford, Richard; Hurley, Kate F; Roth, James A; Schultz, Ronald D; Thacker, Eileen; Welborn, Link

2006-01-01

In 2005, AAHA's Canine Vaccine Task Force met to reexamine and revise guidelines on the use of vaccines in dogs. The results of the Task Force's work are summarized and tabulated in this article and are published in their entirety on the AAHA website (www.aahanet.org). The 2006 AAHA Canine Vaccine Guidelines contain information on new technological developments in vaccines, an introduction to conditionally licensed vaccines, and detailed recommendations on the use of available vaccines. Perhaps the most noteworthy addition to the guidelines is a separate set of recommendations created for shelter facilities. Vaccines are classified as core (universally recommended), noncore (optional), or not recommended. The Task Force recognizes that vaccination decisions must always be made on an individual basis, based on risk and lifestyle factors.

Modeling good research practices--overview: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force--1.

PubMed

Caro, J Jaime; Briggs, Andrew H; Siebert, Uwe; Kuntz, Karen M

2012-01-01

Models--mathematical frameworks that facilitate estimation of the consequences of health care decisions--have become essential tools for health technology assessment. Evolution of the methods since the first ISPOR Modeling Task Force reported in 2003 has led to a new Task Force, jointly convened with the Society for Medical Decision Making, and this series of seven articles presents the updated recommendations for best practices in conceptualizing models; implementing state-transition approaches, discrete event simulations, or dynamic transmission models; and dealing with uncertainty and validating and reporting models transparently. This overview article introduces the work of the Task Force, provides all the recommendations, and discusses some quandaries that require further elucidation. The audience for these articles includes those who build models, stakeholders who utilize their results, and, indeed, anyone concerned with the use of models to support decision making. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Return to Sender

ERIC Educational Resources Information Center

Gordon, Dan

2011-01-01

In the 2007 report, "Maximizing the Impact: The Pivotal Role of Technology in a 21st Century Education System," a task force of leading employers, education technology advocates, and educators concluded that schools were barely using technology, much less developing the tech skills needed of those entering the workplace. The report was a loud,…

Technology of machine tools. Volume 4. Machine tool controls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-10-01

The Machine Tool Task Force (MTTF) was formed to characterize the state of the art of machine tool technology and to identify promising future directions of this technology. This volume is one of a five-volume series that presents the MTTF findings; reports on various areas of the technology were contributed by experts in those areas.

Technology of machine tools. Volume 3. Machine tool mechanics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tlusty, J.

1980-10-01

The Machine Tool Task Force (MTTF) was formed to characterize the state of the art of machine tool technology and to identify promising future directions of this technology. This volume is one of a five-volume series that presents the MTTF findings; reports on various areas of the technology were contributed by experts in those areas.

Technology of machine tools. Volume 5. Machine tool accuracy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hocken, R.J.

1980-10-01

The Machine Tool Task Force (MTTF) was formed to characterize the state of the art of machine tool technology and to identify promising future directions of this technology. This volume is one of a five-volume series that presents the MTTF findings; reports on various areas of the technology were contributed by experts in those areas.

Technology of machine tools. Volume 1. Executive summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, G.P.

1980-10-01

The Machine Tool Task Force (MTTF) was formed to characterize the state of the art of machine tool technology and to identify promising future directions of this technology. This volume is one of a five-volume series that presents the MTTF findings; reports on various areas of the technology were contributed by experts in those areas.

Aircraft fuel conservation technology. Task force report, September 10, 1975

NASA Technical Reports Server (NTRS)

1975-01-01

An advanced technology program is described for reduced fuel consumption in air transport. Cost benefits and estimates are given for improved engine design and components, turboprop propulsion systems, active control systems, laminar flow control, and composite primary structures.

Government Information Locator Service (GILS). Draft report to the Information Infrastructure Task Force

NASA Technical Reports Server (NTRS)

1994-01-01

This is a draft report on the Government Information Locator Service (GILS) to the National Information Infrastructure (NII) task force. GILS is designed to take advantage of internetworking technology known as client-server architecture which allows information to be distributed among multiple independent information servers. Two appendices are provided -- (1) A glossary of related terminology and (2) extracts from a draft GILS profile for the use of the American National Standard Information Retrieval Application Service Definition and Protocol Specification for Library Applications.

A United Framework for Solving Multiagent Task Assignment Problems

DTIC Science & Technology

2007-12-01

Presented to the Faculty Graduate School of Engineering and Management Air Force Institute of Technology Air University Air Education and Training Command in...Member Date Date Accepted: 170-e<.. 01 DateM.V.THOMAS Dean, Graduate School of E,ngineering and Management Air Force Institute of Technology AFIT...actions in two different problem groups: using shame [37] for autonomous robots navigating a minefield, and a waiter - refiller service environment [94

ACR-SNM Task Force on Nuclear Medicine Training: report of the task force.

PubMed

Guiberteau, Milton J; Graham, Michael M

2011-06-01

The expansion of knowledge and technological advances in nuclear medicine and radiology require physicians to have more expertise in functional and anatomic imaging. The convergence of these two specialties into the new discipline of molecular imaging has also begun to place demands on residency training programs for additional instruction in physiology and molecular biology. These changes have unmasked weaknesses in current nuclear medicine and radiology training programs. Adding to the impetus for change are the attendant realities of the job market and uncertain employment prospects for physicians trained in nuclear medicine but not also trained in diagnostic radiology. With this background, the ACR and the Society of Nuclear Medicine convened the Task Force on Nuclear Medicine Training to define the issues and develop recommendations for resident training.

Objectives, Budgets, Thresholds, and Opportunity Costs-A Health Economics Approach: An ISPOR Special Task Force Report [4].

PubMed

Danzon, Patricia M; Drummond, Michael F; Towse, Adrian; Pauly, Mark V

2018-02-01

The fourth section of our Special Task Force report focuses on a health plan or payer's technology adoption or reimbursement decision, given the array of technologies, on the basis of their different values and costs. We discuss the role of budgets, thresholds, opportunity costs, and affordability in making decisions. First, we discuss the use of budgets and thresholds in private and public health plans, their interdependence, and connection to opportunity cost. Essentially, each payer should adopt a decision rule about what is good value for money given their budget; consistent use of a cost-per-quality-adjusted life-year threshold will ensure the maximum health gain for the budget. In the United States, different public and private insurance programs could use different thresholds, reflecting the differing generosity of their budgets and implying different levels of access to technologies. In addition, different insurance plans could consider different additional elements to the quality-adjusted life-year metric discussed elsewhere in our Special Task Force report. We then define affordability and discuss approaches to deal with it, including consideration of disinvestment and related adjustment costs, the impact of delaying new technologies, and comparative cost effectiveness of technologies. Over time, the availability of new technologies may increase the amount that populations want to spend on health care. We then discuss potential modifiers to thresholds, including uncertainty about the evidence used in the decision-making process. This article concludes by discussing the application of these concepts in the context of the pluralistic US health care system, as well as the "excess burden" of tax-financed public programs versus private programs. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

APA Summit on Medical Student Education Task Force on Informatics and Technology: Learning about Computers and Applying Computer Technology to Education and Practice

ERIC Educational Resources Information Center

Hilty, Donald M.; Hales, Deborah J.; Briscoe, Greg; Benjamin, Sheldon; Boland, Robert J.; Luo, John S.; Chan, Carlyle H.; Kennedy, Robert S.; Karlinsky, Harry; Gordon, Daniel B.; Yager, Joel; Yellowlees, Peter M.

2006-01-01

Objective: This article provides a brief overview of important issues for educators regarding medical education and technology. Methods: The literature describes key concepts, prototypical technology tools, and model programs. A work group of psychiatric educators was convened three times by phone conference to discuss the literature. Findings…

Technology of machine tools. Volume 2. Machine tool systems management and utilization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomson, A.R.

1980-10-01

The Machine Tool Task Force (MTTF) was formed to characterize the state of the art of machine tool technology and to identify promising future directions of this technology. This volume is one of a five-volume series that presents the MTTF findings; reports on various areas of the technology were contributed by experts in those areas.

Forecasting the impact of virtual environment technology on maintenance training

NASA Technical Reports Server (NTRS)

Schlager, Mark S.; Boman, Duane; Piantanida, Tom; Stephenson, Robert

1993-01-01

To assist NASA and the Air Force in determining how and when to invest in virtual environment (VE) technology for maintenance training, we identified possible roles for VE technology in such training, assessed its cost-effectiveness relative to existing technologies, and formulated recommendations for a research agenda that would address instructional and system development issues involved in fielding a VE training system. In the first phase of the study, we surveyed VE developers to forecast capabilities, maturity, and estimated costs for VE component technologies. We then identified maintenance tasks and their training costs through interviews with maintenance technicians, instructors, and training developers. Ten candidate tasks were selected from two classes of maintenance tasks (seven aircraft maintenance and three space maintenance) using five criteria developed to identify types of tasks most likely to benefit from VE training. Three tasks were used as specific cases for cost-benefit analysis. In formulating research recommendations, we considered three aspects of feasibility: technological considerations, cost-effectiveness, and anticipated R&D efforts. In this paper, we describe the major findings in each of these areas and suggest research efforts that we believe will help achieve the goal of a cost-effective VE maintenance training system by the next decade.

Estimation of Handgrip Force from SEMG Based on Wavelet Scale Selection.

PubMed

Wang, Kai; Zhang, Xianmin; Ota, Jun; Huang, Yanjiang

2018-02-24

This paper proposes a nonlinear correlation-based wavelet scale selection technology to select the effective wavelet scales for the estimation of handgrip force from surface electromyograms (SEMG). The SEMG signal corresponding to gripping force was collected from extensor and flexor forearm muscles during the force-varying analysis task. We performed a computational sensitivity analysis on the initial nonlinear SEMG-handgrip force model. To explore the nonlinear correlation between ten wavelet scales and handgrip force, a large-scale iteration based on the Monte Carlo simulation was conducted. To choose a suitable combination of scales, we proposed a rule to combine wavelet scales based on the sensitivity of each scale and selected the appropriate combination of wavelet scales based on sequence combination analysis (SCA). The results of SCA indicated that the scale combination VI is suitable for estimating force from the extensors and the combination V is suitable for the flexors. The proposed method was compared to two former methods through prolonged static and force-varying contraction tasks. The experiment results showed that the root mean square errors derived by the proposed method for both static and force-varying contraction tasks were less than 20%. The accuracy and robustness of the handgrip force derived by the proposed method is better than that obtained by the former methods.

Sensorization of a surgical robotic instrument for force sensing

NASA Astrophysics Data System (ADS)

Shahzada, Kaspar S.; Yurkewich, Aaron; Xu, Ran; Patel, Rajni V.

2016-03-01

This paper presents the development and application of an approach for sensorizing a surgical robotic instrument for two degree-of-freedom (DOF) lateral force sensing. The sensorized instrument is compatible with the da Vinci® Surgical System and can be used for skills assessment and force control in specific surgical tasks. The sensing technology utilizes a novel layout of four fiber Bragg grating (FBG) sensors attached to the shaft of a da Vinci® surgical instrument. The two cross-section layout is insensitive to error caused by combined force and torque loads, and the orientation of the sensors minimizes the condition number of the instrument's compliance matrix. To evaluate the instrument's sensing capabilities, its performance was tested using a commercially available force-torque sensor, and showed a resolution of 0.05N at 1 kHz sampling rate. The performance of the sensorized instrument was evaluated by performing three surgical tasks on phantom tissue using the da Vinci® system with the da Vinci Research Kit (dVRK): tissue palpation, knot tightening during suturing and Hem-O-Lok® tightening during knotless suturing. The tasks were designed to demonstrate the robustness of the sensorized force measurement approach. The paper reports the results of further evaluation by a group of expert and novice surgeons performing the three tasks mentioned above.

Occupational Analysis Technology: Expanded Role in Development of Cost-Effective Maintenance Systems. Final Report.

ERIC Educational Resources Information Center

Foley, John P., Jr.

A study was conducted to refine and coordinate occupational analysis, job performance aids, and elements of the instructional systems development process for task specific Air Force maintenance training. Techniques for task identification and analysis (TI & A) and data gathering techniques for occupational analysis were related. While TI &…

Force-Sensing Enhanced Simulation Environment (ForSense) for laparoscopic surgery training and assessment.

PubMed

Cundy, Thomas P; Thangaraj, Evelyn; Rafii-Tari, Hedyeh; Payne, Christopher J; Azzie, Georges; Sodergren, Mikael H; Yang, Guang-Zhong; Darzi, Ara

2015-04-01

Excessive or inappropriate tissue interaction force during laparoscopic surgery is a recognized contributor to surgical error, especially for robotic surgery. Measurement of force at the tool-tissue interface is, therefore, a clinically relevant skill assessment variable that may improve effectiveness of surgical simulation. Popular box trainer simulators lack the necessary technology to measure force. The aim of this study was to develop a force sensing unit that may be integrated easily with existing box trainer simulators and to (1) validate multiple force variables as objective measurements of laparoscopic skill, and (2) determine concurrent validity of a revised scoring metric. A base plate unit sensitized to a force transducer was retrofitted to a box trainer. Participants of 3 different levels of operative experience performed 5 repetitions of a peg transfer and suture task. Multiple outcome variables of force were assessed as well as a revised scoring metric that incorporated a penalty for force error. Mean, maximum, and overall magnitudes of force were significantly different among the 3 levels of experience, as well as force error. Experts were found to exert the least force and fastest task completion times, and vice versa for novices. Overall magnitude of force was the variable most correlated with experience level and task completion time. The revised scoring metric had similar predictive strength for experience level compared with the standard scoring metric. Current box trainer simulators can be adapted for enhanced objective measurements of skill involving force sensing. These outcomes are significantly influenced by level of expertise and are relevant to operative safety in laparoscopic surgery. Conventional proficiency standards that focus predominantly on task completion time may be integrated with force-based outcomes to be more accurately reflective of skill quality. Copyright © 2015 Elsevier Inc. All rights reserved.

Report of the U.S. Department of Education Task Force on Learning and Electronic Technology.

ERIC Educational Resources Information Center

Office of Educational Research and Improvement (ED), Washington, DC.

Part of the Department of Education's planning and review process on the potential role and application of learning and electronic technologies in education, this report is based on a review of information from several sources, including reports, studies, survey data, and other literature on the availability and use of electronic technology in…

APA Summit on Medical Student Education Task Force on Informatics and Technology: Steps to Enhance the Use of Technology in Education through Faculty Development, Funding and Change Management

ERIC Educational Resources Information Center

Hilty, Donald M.; Benjamin, Sheldon; Briscoe, Gregory; Hales, Deborah J.; Boland, Robert J.; Luo, John S.; Chan, Carlyle H.; Kennedy, Robert S.; Karlinsky, Harry; Gordon, Daniel B.; Yellowlees, Peter M.; Yager, Joel

2006-01-01

Objective: This article provides an overview of how trainees, faculty, and institutions use technology for acquiring knowledge, skills, and attitudes for practicing modern medicine. Method: The authors reviewed the literature on medical education, technology, and change, and identify the key themes and make recommendations for implementing…

Partnership with Industry: Film Production Technology.

ERIC Educational Resources Information Center

Rietveld, Richard; And Others

The 1988 final report of a task force from the Florida Postsecondary Education Planning Commission stated that in order to ensure continued growth of the motion picture film industry in the state, the postsecondary community must provide a well-trained and competent work force adept in all aspects of the industry. The film industry is a growing…

Report of the Interagency Task Force on Carbon Capture and Storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-08-01

Carbon capture and storage (CCS) refers to a set of technologies that can greatly reduce carbon dioxide (CO{sub 2}) emissions from new and existing coal- and gas-fired power plants, industrial processes, and other stationary sources of CO{sub 2}. In its application to electricity generation, CCS could play an important role in achieving national and global greenhouse gas (GHG) reduction goals. However, widespread cost-effective deployment of CCS will occur only if the technology is commercially available and a supportive national policy framework is in place. In keeping with that objective, on February 3, 2010, President Obama established an Interagency Task Forcemore » on Carbon Capture and Storage composed of 14 Executive Departments and Federal Agencies. The Task Force, co-chaired by the Department of Energy (DOE) and the Environmental Protection Agency (EPA), was charged with proposing a plan to overcome the barriers to the widespread, cost-effective deployment of CCS within ten years, with a goal of bringing five to ten commercial demonstration projects online by 2016. Composed of more than 100 Federal employees, the Task Force examined challenges facing early CCS projects as well as factors that could inhibit widespread commercial deployment of CCS. In developing the findings and recommendations outlined in this report, the Task Force relied on published literature and individual input from more than 100 experts and stakeholders, as well as public comments submitted to the Task Force. The Task Force also held a large public meeting and several targeted stakeholder briefings. While CCS can be applied to a variety of stationary sources of CO{sub 2}, its application to coal-fired power plant emissions offers the greatest potential for GHG reductions. Coal has served as an important domestic source of reliable, affordable energy for decades, and the coal industry has provided stable and quality high-paying jobs for American workers. At the same time, coal-fired power plants are the largest contributor to U.S. greenhouse gas (GHG) emissions, and coal combustion accounts for 40 percent of global carbon dioxide (CO{sub 2}) emissions from the consumption of energy. EPA and Energy Information Administration (EIA) assessments of recent climate and energy legislative proposals show that, if available on a cost-effective basis, CCS can over time play a large role in reducing the overall cost of meeting domestic emissions reduction targets. By playing a leadership role in efforts to develop and deploy CCS technologies to reduce GHG emissions, the United States can preserve the option of using an affordable, abundant, and domestic energy resource, help improve national security, help to maximize production from existing oil fields through enhanced oil recovery (EOR), and assist in the creation of new technologies for export. While there are no insurmountable technological, legal, institutional, regulatory or other barriers that prevent CCS from playing a role in reducing GHG emissions, early CCS projects face economic challenges related to climate policy uncertainty, first-of-a-kind technology risks, and the current high cost of CCS relative to other technologies. Administration analyses of proposed climate change legislation suggest that CCS technologies will not be widely deployed in the next two decades absent financial incentives that supplement projected carbon prices. In addition to the challenges associated with cost, these projects will need to meet regulatory requirements that are currently under development. Long-standing regulatory programs are being adapted to meet the circumstances of CCS, but limited experience and institutional capacity at the Federal and State level may hinder implementation of CCS-specific requirements. Key legal issues, such as long-term liability and property rights, also need resolution. A climate policy designed to reduce our Nation's GHG emissions is the most important step for commercial deployment of low-carbon technologies such as CCS, because it will create a stable, long-term framework for private investments. A concerted effort to properly address financial, economic, technological, legal, institutional, and social barriers will enable CCS to be a viable climate change mitigation option that can over time play an important role in reducing the overall cost of meeting domestic and global emissions reduction targets. Federal and State agencies can use existing authorities and programs to begin addressing these barriers while ensuring appropriate safeguards are in place to protect the environment and public health and safety.« less

A model for technology assessment as applied to closed loop infusion systems. Technology Assessment Task Force of the Society of Critical Care Medicine.

PubMed

Jastremski, M; Jastremski, C; Shepherd, M; Friedman, V; Porembka, D; Smith, R; Gonzales, E; Swedlow, D; Belzberg, H; Crass, R

1995-10-01

To test a model for the assessment of critical care technology on closed loop infusion control, a technology that is in its early stages of development and testing on human subjects. A computer-assisted search of the English language literature and reviews of the gathered data by experts in the field of closed loop infusion control systems. Studies relating to closed loop infusion control that addressed one or more of the questions contained in our technology assessment template were analyzed. Study design was not a factor in article selection. However, the lack of well-designed clinical outcome studies was an important factor in determining our conclusions. A focus person summarized the data from the selected studies that related to each of the assessment questions. The preliminary data summary developed by the focus person was further analyzed and refined by the task force. Experts in closed loop systems were then added to the group to review the summary provided by the task force. These experts' comments were considered by the task force and this final consensus report was developed. Closed loop system control is a technological concept that may be applicable to several aspects of critical care practice. This is a technology in the early stages of evolution and much more research and data are needed before its introduction into usual clinical practice. Furthermore, each specific application and each device for each application (e.g., nitroprusside infusion, ventilator adjustment), although based on the same technological concept, are sufficiently different in terms of hardware and computer algorithms to require independent validation studies. Closed loop infusion systems may have a role in critical care practice. However, for most applications, further development is required to move this technology from the innovation phase to the point where it can be evaluated so that its role in critical car practice can be defined. Each application of closed loop infusion systems must be independently validated by appropriately designed research studies. Users should be provided with the clinical parameters driving each closed loop system so that they can ensure that it agrees with their opinion of acceptable medical practice. Clinical researchers and leaders in industry should collaborate to perform the scientifically valid, outcome-based research that is necessary to evaluate the effect of this new technology. The original model we developed for technology assessment required the addition of several more questions to produce a complete analysis of an emerging technology. An emerging technology should be systematically assessed (using a model such as the model developed by the Society of Critical Care Medicine), before its introduction into clinical practice in order to provide a focus for human outcome validation trials and to minimize the possibility of widespread use of an unproven technology.

Lowering Barriers to Telecommunications Growth.

ERIC Educational Resources Information Center

Crombie, Douglass D., Ed.

This report of the Science and Technology Telecommunications Task Force consists of analyses of diverse issues, along with recommended actions. The project had two objectives: (1) to identify actions that will pave the way for the application of a few promising technologies to the benefit of users of telecommunications, and (2) to suggest actions…

Strategic Planning for Economic Development.

ERIC Educational Resources Information Center

Groff, Warren H.

The Ohio Task Force on High Technology (TFHT) was formed in 1982 to make recommendations in four areas: (1) the development of future scenarios for Ohio; (2) human resource development of providers and consumers of postsecondary educational services; (3) equipment and capital plan expenditures; and (4) implications of high technology for academic…

Implementation of a robotic flexible assembly system

NASA Technical Reports Server (NTRS)

Benton, Ronald C.

1987-01-01

As part of the Intelligent Task Automation program, a team developed enabling technologies for programmable, sensory controlled manipulation in unstructured environments. These technologies include 2-D/3-D vision sensing and understanding, force sensing and high speed force control, 2.5-D vision alignment and control, and multiple processor architectures. The subsequent design of a flexible, programmable, sensor controlled robotic assembly system for small electromechanical devices is described using these technologies and ongoing implementation and integration efforts. Using vision, the system picks parts dumped randomly in a tray. Using vision and force control, it performs high speed part mating, in-process monitoring/verification of expected results and autonomous recovery from some errors. It is programmed off line with semiautomatic action planning.

The Economic and Social Impacts of the Transition from the Industrial Society to a Computer Literate, High Technology, Information Society.

ERIC Educational Resources Information Center

Groff, Warren H.

As our society evolves from an industrial society to a computer literate, high technology, information society, educational planners must reexamine the role of postsecondary education in economic development and in intellectual capital formation. In response to this need, a task force on high technology was established to examine the following…

An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

NASA Technical Reports Server (NTRS)

Sampson, Paul G.; Sny, Linda C.

1992-01-01

The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

Interchangeable end effector tools utilized on the PFMA

NASA Technical Reports Server (NTRS)

Cody, Joe; Carroll, John; Crow, George; Gierow, Paul; Littles, Jay; Maness, Michael; Morrison, Jim

1992-01-01

An instrumented task board, used for measuring forces applied by the Protoflight Manipulator Arm (PFMA) to the task board, was fabricated and delivered to Marshall Space Flight Center. SRS Technologies phased out the existing IBM compatible data acquisition system, used with a instrumented task board, and integrated the force measuring electronic hardware in with the Macintosh II data acquisition system. The purpose of this change was to acquire all data with the same time tag, allowing easier and more accurate data reduction in addition to real-time graphics. A three-dimensional optical position sensing system for determining the location of the PFMA's end effect or in reference to the center of the instrumented task board was also designed and delivered under. An improved task board was fabricated which included an improved instrumented beam design. The modified design of the task board improved the force/torque measurement system by increasing the sensitivity, reliability, load range and ease of maintenance. A calibration panel for the optical position system was also designed and fabricated. The calibration method developed for the position sensors enhanced the performance of the sensors as well as simplified the installation and calibration procedures required. The modifications made under this effort expanded the capabilities of the task board system. The system developed determines the arm's position relative to the task board and measures the signals to the joints resulting from the operator's control signals in addition to the task board forces. The software and hardware required to calculate and record the position of the PFMA during the performance of tasks with the instrumented task board were defined, designed and delivered to MSFC. PFMA joint input signals can be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to realtime force and position sensor data presentation.

Interchangeable end effector tools utilized on the PFMA

NASA Astrophysics Data System (ADS)

Cody, Joe; Carroll, John; Crow, George; Gierow, Paul; Littles, Jay; Maness, Michael; Morrison, Jim

1992-02-01

An instrumented task board, used for measuring forces applied by the Protoflight Manipulator Arm (PFMA) to the task board, was fabricated and delivered to Marshall Space Flight Center. SRS Technologies phased out the existing IBM compatible data acquisition system, used with a instrumented task board, and integrated the force measuring electronic hardware in with the Macintosh II data acquisition system. The purpose of this change was to acquire all data with the same time tag, allowing easier and more accurate data reduction in addition to real-time graphics. A three-dimensional optical position sensing system for determining the location of the PFMA's end effect or in reference to the center of the instrumented task board was also designed and delivered under. An improved task board was fabricated which included an improved instrumented beam design. The modified design of the task board improved the force/torque measurement system by increasing the sensitivity, reliability, load range and ease of maintenance. A calibration panel for the optical position system was also designed and fabricated. The calibration method developed for the position sensors enhanced the performance of the sensors as well as simplified the installation and calibration procedures required. The modifications made under this effort expanded the capabilities of the task board system. The system developed determines the arm's position relative to the task board and measures the signals to the joints resulting from the operator's control signals in addition to the task board forces. The software and hardware required to calculate and record the position of the PFMA during the performance of tasks with the instrumented task board were defined, designed and delivered to MSFC. PFMA joint input signals can be measured from a breakout box to evaluate the sensitivity or response of the arm operation to control commands. The data processing system provides the capability for post processing of time-history graphics and plots of the PFMA positions, the operator's actions, and the PFMA servo reactions in addition to realtime force and position sensor data presentation.

Manufacturing Technology (MATES) II. Task Order 0006: Air Force Technology and Industrial Base Research Sub-Task 07: Future Advances in Electronic Materials and Processes-Flexible Hybrid Electronics

DTIC Science & Technology

2016-02-29

A-E) Ring Resonators (RR); (F) Optically Pumped Laser in RR; G) Coupled RR; H) Ultra-High Q-factor [942...tendency of particulates suspended in coffee to move towards the edges of a coffee spill, causing a ring -like stain after the solvent has evaporated...variety of functions, including to make the surface non-sticky (anti-blocking), to allow the surfaces to slide over one another ( slip aid), to cause the

New Technology Industries. Skills Task Force Research Paper 10.

ERIC Educational Resources Information Center

Hendry, Chris

This paper provides an overview of the growth of new technology industries in Great Britain and the skills needed for these industries. The industries are advanced materials, biotechnology, and opto-electronics. The report profiles the current status, expected growth, and skills needed for each of these industry sectors. It also points out the…

Transforming Information Literacy in the Sciences through the Lens of e-Science

ERIC Educational Resources Information Center

Berman, Elizabeth

2013-01-01

In 2011, the ACRL Science & Technology Section (STS) completed its five-year review of the "Information Literacy Standards for Science and Engineering/Technology." Predicated by the evolving nature of scholarship and research in the sciences, the reviewing task force strongly recommended that the standards be revised. This paper…

Older Worker Attitudes toward Change and Challenge.

ERIC Educational Resources Information Center

Donchin, Gwyneth G.

A task force from a high technology company recently conducted a nine-month study to determine the attitudes of older workers toward work, management, technological change, and productivity. Data were gathered from personnel files; an age audit was undertaken, and 4,000 employees were randomly interviewed. The workers were asked to offer opinions…

Technology: Transforming Federal Training. Report to the President.

ERIC Educational Resources Information Center

President's Task Force on Federal Training Technology, Washington, DC.

The federal government's ability to provide the services and products that the American public expects depends on the talents and skills of the federal workforce. Therefore, federal employees must undertake retraining to learn new skills. Accelerating the use of learning technology will contribute to the learning process. A federal task force on…

Technology-Capable Teachers Transitioning to Technology-Challenged Schools

ERIC Educational Resources Information Center

Derbel, Faiza

2017-01-01

Developing countries lacking capabilities, funds and human resources are compelled to improve the digital literacy rates of their task force through educational initiatives. This is the case of Tunisia where a stand-alone in-service teacher education (Ted) initiative was implemented in 2014 and 2015. The aim of this project, the Tech Age Teacher…

Senior scientists

NASA Astrophysics Data System (ADS)

A small task force of volunteer senior scientists and engineers was organized recently under the aegis of the American Association of Retired Persons (AARP) “to utilize its collective talents for the betterment of society and to provide opportunities for individual personal accomplishment and enrichment.” Among the projects under consideration are assisting the Washington, D.C., school system to improve its science and mathematics instruction and assessing the impact of technology on older persons.One of the task force's first projects is to develop a roster of retired scientists and engineers in the Washington, D.C., metropolitan area to garner volunteer talent for future projects.

Clinical Applications of 3D Printing: Primer for Radiologists.

PubMed

Ballard, David H; Trace, Anthony Paul; Ali, Sayed; Hodgdon, Taryn; Zygmont, Matthew E; DeBenedectis, Carolynn M; Smith, Stacy E; Richardson, Michael L; Patel, Midhir J; Decker, Summer J; Lenchik, Leon

2018-01-01

Three-dimensional (3D) printing refers to a number of manufacturing technologies that create physical models from digital information. Radiology is poised to advance the application of 3D printing in health care because our specialty has an established history of acquiring and managing the digital information needed to create such models. The 3D Printing Task Force of the Radiology Research Alliance presents a review of the clinical applications of this burgeoning technology, with a focus on the opportunities for radiology. Topics include uses for treatment planning, medical education, and procedural simulation, as well as patient education. Challenges for creating custom implantable devices including financial and regulatory processes for clinical application are reviewed. Precedent procedures that may translate to this new technology are discussed. The task force identifies research opportunities needed to document the value of 3D printing as it relates to patient care. Copyright © 2018 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

Report on a Project To Integrate Technology into Required Preservice Teacher Education Courses at Nine Westchester Colleges and Universities: W.T.E.G., Volume II.

ERIC Educational Resources Information Center

Freeouf, Barbara C., Ed.

This collection of papers describes efforts of the Westchester Teacher Education Group (WTEG) to incorporate technology into preservice teacher education curricula. Part I gives an overview of the WTEG and the activities of its task force on technology, in the following three papers: "The Westchester Teacher Education Group: History and…

A National Mandate for Education Abroad: Getting on with the Task. Report of the National Task Force on Undergraduate Education Abroad.

ERIC Educational Resources Information Center

Council on International Educational Exchange, New York, NY.

This report addresses the proposition that higher education must provide more international content, and that the United States, at present, is ill-prepared for the changes in business, manufacturing, diplomacy, science, and technology that have come with an intensely interdependent world. Five major recommendations are presented and discussed:…

Report on the Task Force Meeting on Task Analysis and Role Definition. (Indiana State Univ., October 1967).

ERIC Educational Resources Information Center

Jordan, Daniel C.

If education is to keep up with social and technological change, teachers must be learning and developing at a rate similar to that of students, requiring the educational staff to render highly diverse and wide-ranging services. The basic strategy essential to such services is the development of differentiated staffing patterns which will allow…

Army Science Board FY2000 Summer Study. Technical and Tactical Opportunities for Revolutionary Advances in Rapidly Deployable Joint Ground Forces in the 2015-2025 Era. Volume III: Information Dominance Panel Report

DTIC Science & Technology

2001-04-01

Information Dominance , Sustainment and Support, and Training. The study concludes: 1) the FCS concept is sound, but senior level attention is required to ensure technologies are ready for 2006 FCS EMD; and 2) Key technologies will significantly improve force projection and combat power. The Information Dominance Panel was tasked to: 1) Assess required sensors at National and Theater level; 2) Assess the technological opportunity to provide necessary bandwidth for data, voice and video requirements; 3) Ascertain the requirements to deny the threat

A model for technology assessment applied to pulse oximetry. The Technology Assessment Task Force of the Society of Critical Care Medicine.

PubMed

1993-04-01

To test a model for the assessment of critical care technology. To develop practice guidelines for the use of pulse oximetry. A computer-assisted search of the English language literature and interviews with recognized experts in the field of pulse oximetry. Those studies that addressed one or more of the seven questions contained in our technology assessment template were analyzed. Study design was not a factor in article selection. However, the lack of well-designed clinical outcome studies was an important factor in determining the method of practice policy development we utilized. A focus person summarized the data from the selected studies that related to each of the seven assessment questions. The preliminary data summary developed by the focus person was further analyzed and refined by the task force and then sent to 16 expert reviewers for comment. These expert comments were considered by the task force, and this final consensus report was developed. Pulse oximetry combines the principles of spectrophotometry and plethysmography to noninvasively measure oxygen saturation with a high degree of accuracy over the range of 80% to 100% saturation, assuming the device is being used according to the manufacturer's instructions and without any adverse operating conditions. The appropriate clinical uses of pulse oximetry fall into one of two broad categories: as a warning system based on continuous real-time measurement of arterial desaturation, or as an end-point for titration of therapeutic interventions. There are no published studies that allow for definitive, outcome-based conclusions concerning either the clinical impact or cost-benefit ratio of pulse oximetry. The model developed for technology assessment proved to be appropriate for assessing pulse oximetry. The available data have allowed us to develop an evidence-based practice policy for the use of pulse oximetry in critical care. Critical care clinicians, researchers, and industry have a shared responsibility to provide valid outcome and efficacy studies of new technologies.

Learning Partnerships: Strengthening American Jobs in the Global Economy. A Report of the Task Force on Workforce Development

ERIC Educational Resources Information Center

Albert Shanker Institute, 2004

2004-01-01

Global competition, sweeping technological change, and demographic shifts in the labor force call for a national campaign to improve the skills and professionalism of the American workforce. This document calls for the creation of new learning partnerships throughout communities and workplaces to sustain middle-class jobs, pay the social costs of…

Educating the Newest Americans: Report of the Task Force on New Immigrants and American Education.

ERIC Educational Resources Information Center

American Jewish Committee, New York, NY.

American education will be challenged over the next decades by a flow of increasingly diverse immigrants from all over the world and a workplace that will require a technologically sophisticated labor force. The response of the educational system to the new immigrants will have important consequences for society. Current immigrants do not have the…

2016 Consequence Management Advisory Division's (CMAD) Annual Report

EPA Pesticide Factsheets

CMAD annual report for 2016 which covers activities such as radiation task force leaders annual training, national criminal enforcement response team annual training, field technology demonstrations, and a new method to detect perfluorinated compounds.

Trace Contraband Detection Field-Test by the South Texas Specialized Crimes and Narcotics Task Force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hannum, David W.; Shannon, Gary W.

This report describes the collaboration between the South Texas Specialized Crimes and Narcotics Task Force (STSCNTF) and Sandia National Laboratories (SNL) in a field test that provided prototype hand-held trace detection technology for use in counter-drug operations. The National Institute of Justice (NIJ)/National Law Enforcement and Corrections Technology Center (NLECTC)/Border Research and Technology Center (BRTC) was contacted by STSCNTF for assistance in obtaining cutting-edge technology. The BRTC created a pilot project for Sandia National Laboratories (SNL) and the STSCNTF for the use of SNL’s Hound, a hand-held sample collection and preconcentration system that, when combined with a commercial chemical detector,more » can be used for the trace detection of illicit drugs and explosives. The STSCNTF operates in an area of high narcotics trafficking where methods of concealment make the detection of narcotics challenging. Sandia National Laboratories’ (SNL) Contraband Detection Department personnel provided the Hound system hardware and operational training. The Hound system combines the GE VaporTracer2, a hand-held commercial chemical detector, with an SNL-developed sample collection and preconcentration system. The South Texas Task force reported a variety of successes, including identification of a major shipment of methamphetamines, the discovery of hidden compartments in vehicles that contained illegal drugs and currency used in drug deals, and the identification of a suspect in a nightclub shooting. The main advantage of the hand-held trace detection unit is its ability to quickly identify the type of chemical (drugs or explosives) without a long lag time for laboratory analysis, which is the most common analysis method for current law enforcement procedures.« less

Report of the Defense Science Board Task Force on Basic Research

DTIC Science & Technology

2012-01-01

Applied Research Navy $2.5 Laboratory University of Maryland, College Park: Center for National Security $18.7 Advanced Study of Language Agency ( NSA ...Stevens Institute of Technology: Systems ASD{R&E) and $7.2 Engineering Research Center NSA DOD Federally Funded Research and Development Centers...Navy USD(AT&L) Army USD(AT&L) Air Force Air Force USD(AT&L) NSA USD(AT&L) USD(AT&L) FFRDCs that are sponsored by agencies other than DOD

Development of Articulated Competency-Based Curriculum in Laser/Electro-Optics Technology. Final Report.

ERIC Educational Resources Information Center

Luzerne County Community Coll., Nanticoke, PA.

The project described in this report was conducted at the Community College of Luzerne County (Pennsylvania) to develop, in conjunction with area vocational-technical schools, the second year of a competency-based curriculum in laser/electro-optics technology. During the project, a task force of teachers from the area schools and the college…

U.S. Army Hybrid Propulsion System R&D Overview ATA/Technology & Maintenance Council 2011 Fall Meeting, Hybrid Powertrain Task Force Session

DTIC Science & Technology

2011-09-19

Integration – Non-Thermal Plasma JP8 reformer & SOFC system – Lithium-Iron Phosphate Battery Technology – Lithium Ion Battery & energy storage systems...regeneration and includes a lithium ion battery energy storage – Export power capabilities meeting mission requirements (5-50 kilowatt [kW]) – Air

Development of Articulated Competency-Based Curriculum in Automated Systems/Robotics Technology. Final Report.

ERIC Educational Resources Information Center

Luzerne County Community Coll., Nanticoke, PA.

The project described in this report was conducted at the Community College of Luzerne County (Pennsylvania) to develop, in conjunction with area vocational-technical schools, the second year of a competency-based curriculum in automated systems/robotics technology. During the project, a task force of teachers from the area schools and the college…

78 FR 52560 - Hurricane Sandy Rebuilding Task Force-Rebuild-by-Design; Announcement of Selection of Design Teams

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-23

... launch Rebuild by Design and select the 10 teams. NEA has a history of supporting and facilitating design... design teams selected are the following: Interboro Partners with the New Jersey Institute of Technology.... Massachusetts Institute of Technology Center for Advanced Urbanism and the Dutch Delta Collaborative by ZUS...

Conceptual design of an aircraft automated coating removal system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, J.E.; Draper, J.V.; Pin, F.G.

1996-05-01

Paint stripping of the U.S. Air Force`s large transport aircrafts is currently a labor-intensive, manual process. Significant reductions in costs, personnel and turnaround time can be accomplished by the judicious use of automation in some process tasks. This paper presents the conceptual design of a coating removal systems for the tail surfaces of the C-5 plane. Emphasis is placed on the technology selection to optimize human-automation synergy with respect to overall costs, throughput, quality, safety, and reliability. Trade- offs between field-proven vs. research-requiring technologies, and between expected gain vs. cost and complexity, have led to a conceptual design which ismore » semi-autonomous (relying on the human for task specification and disturbance handling) yet incorporates sensor- based automation (for sweep path generation and tracking, surface following, stripping quality control and tape/breach handling).« less

AORN ergonomic tool 7: pushing, pulling, and moving equipment on wheels.

PubMed

Waters, Thomas; Lloyd, John D; Hernandez, Edward; Nelson, Audrey

2011-09-01

Pushing and pulling equipment in and around the OR can place high shear force demands on perioperative team members' shoulder and back muscles and joints. These high forces may lead to work-related musculoskeletal disorders. AORN Ergonomic Tool 7: Pushing, Pulling, and Moving Equipment on Wheels can help perioperative team members assess the risk of pushing and pulling tasks in the perioperative setting. The tool provides evidence-based suggestions about when assistive devices should be used for these tasks and is based on current ergonomic safety concepts, scientific evidence, and knowledge of effective technology and procedures, including equipment and devices for safe patient handling. Published by Elsevier Inc.

Report of the Defense Science Board Task Force on Critical Homeland Infrastructure Protection

DTIC Science & Technology

2007-01-01

nuclear, radiation and explosive hazards; • Monitoring “people of interest” while protecting civil liberties; • Detection of hostile intent; • Detect...Guardian DARPA Overview Mr. Roger Gibbs DARPA LLNL Technologies in Support of Infrastructure Protection Mr. Don Prosnitz LLNL Sandia National...Mechanical Engineers AT/FP Antiterrorism/Force Protection CBRNE Chemical Biological Radiological Nuclear Explosive CERT Commuter Emergency Response Team

Social Network Modeling and Simulation of Integrated Resilient Command and Control (C2) in Contested Cyber Environments

DTIC Science & Technology

2011-12-09

traced to non-state actors it provided the impetus to the creation of Joint Task Force Computer Network Defense (JTF-CND). Since the creation of JTF...telecommunications and IT systems. One of those many efforts by the USAF has been the creation of the 24th Air Force (24th AF), also known as US Air Force...Support For Organizational Structures, Policies, Technologies and People to Improve Resilience Prior to creation of USCYBERCOM, responsibility for

Defense Science Board 1996 Summer Study Task Force On Tactics and Technology for 21st Century Military Superiority. Volume 2, Part 1. Supporting Materials

DTIC Science & Technology

1996-10-01

systems currently headed for deployment ( BIDS is highlighted in the chart) to widely dispersed microsensors on micro, autonomous platforms. Small room... Small , Rapidly Deployable Forces" Joe Polito, Dan Rondeau, Sandia National Laboratory V.2. "Robotic Concepts for Small Rapidly Deployable Forces" V-7...Robert Palmquist, Jill Fahrenholtz, Richard Wheeler, Sandia National Laboratory V.3. "Potential for Distributed Ground Sensors in Support of Small Unit V

Enhancing patient safety and quality of care by improving the usability of electronic health record systems: recommendations from AMIA.

PubMed

Middleton, Blackford; Bloomrosen, Meryl; Dente, Mark A; Hashmat, Bill; Koppel, Ross; Overhage, J Marc; Payne, Thomas H; Rosenbloom, S Trent; Weaver, Charlotte; Zhang, Jiajie

2013-06-01

In response to mounting evidence that use of electronic medical record systems may cause unintended consequences, and even patient harm, the AMIA Board of Directors convened a Task Force on Usability to examine evidence from the literature and make recommendations. This task force was composed of representatives from both academic settings and vendors of electronic health record (EHR) systems. After a careful review of the literature and of vendor experiences with EHR design and implementation, the task force developed 10 recommendations in four areas: (1) human factors health information technology (IT) research, (2) health IT policy, (3) industry recommendations, and (4) recommendations for the clinician end-user of EHR software. These AMIA recommendations are intended to stimulate informed debate, provide a plan to increase understanding of the impact of usability on the effective use of health IT, and lead to safer and higher quality care with the adoption of useful and usable EHR systems.

Enhancing patient safety and quality of care by improving the usability of electronic health record systems: recommendations from AMIA

PubMed Central

Middleton, Blackford; Bloomrosen, Meryl; Dente, Mark A; Hashmat, Bill; Koppel, Ross; Overhage, J Marc; Payne, Thomas H; Rosenbloom, S Trent; Weaver, Charlotte; Zhang, Jiajie

2013-01-01

In response to mounting evidence that use of electronic medical record systems may cause unintended consequences, and even patient harm, the AMIA Board of Directors convened a Task Force on Usability to examine evidence from the literature and make recommendations. This task force was composed of representatives from both academic settings and vendors of electronic health record (EHR) systems. After a careful review of the literature and of vendor experiences with EHR design and implementation, the task force developed 10 recommendations in four areas: (1) human factors health information technology (IT) research, (2) health IT policy, (3) industry recommendations, and (4) recommendations for the clinician end-user of EHR software. These AMIA recommendations are intended to stimulate informed debate, provide a plan to increase understanding of the impact of usability on the effective use of health IT, and lead to safer and higher quality care with the adoption of useful and usable EHR systems. PMID:23355463

Our science matters - and is recognized

USDA-ARS?s Scientific Manuscript database

The Presidential Task Force on Agriculture and Rural Prosperity listed five key indicators of rural prosperity: e-Connectivity for Rural America, Improving Quality of Life, Supporting a Rural Workforce, Harnessing Technological Innovation, and Economic Development (https://www.usda.gov/sites/default...

NASA unveils its big astrophysics dreams

NASA Astrophysics Data System (ADS)

Gwynne, Peter

2014-02-01

A task force appointed by the astrophysicists subcommittee of NASA's advisory council has published a report looking at the technologies needed to answer three big questions: Are we alone? How did we get here? And how does the universe work?

Effects of distractors and force feedback on an aimed movement task in a CDTI environment

NASA Astrophysics Data System (ADS)

Monk, Kevin J., II

New onboard technologies will be required for future cockpits to support the altered responsibilities of pilots under the NextGen program. Effective Cockpit Displays of Information (CD Tis) should provide more flexibility to pilots en route and reduce the probability of conflicts. However, precise input from pilots can be difficult due to the unstable environment in the cockpit. The present study used a non-traditional input device (Novint Falcon) to examine the effect of force feedback on operator performance during point-and-click movements in a CDTI environment when distractors are present. Twelve participants performed point-and-click tasks with varying amounts of force feedback, distractor locations, target sizes, distances, and movement directions. Overall movement times (OMTs) were recorded. Results demonstrated that force feedback did not reduce or match OMTs relative to the computer mouse. However, significant interactions with other target variables highlighted conditional differences between the force levels, as well as distractor effects.

Orofacial and thumb-index finger ramp-and-hold isometric force dynamics in young neurotypical adults.

PubMed

Barlow, Steven M; Hozan, Mohsen; Lee, Jaehoon; Greenwood, Jake; Custead, Rebecca; Wardyn, Brianna; Tippin, Kaytlin

2018-04-27

The relation among several parameters of the ramp-and-hold isometric force contraction (peak force and dF/dt max during the initial phase of force recruitment, and the proportion of hold-phase at target) was quantified for the right and left thumb-index finger pinch, and lower lip midline compression in 40 neurotypical right-handed young adults (20 female/20 males) using wireless force sensors and data acquisition technology developed in our laboratory. In this visuomotor control task, participants produced ramp-and-hold isometric forces as 'rapidly and accurately' as possible to end-point target levels at 0.25, 0.5, 1 and 2 Newtons presented to a computer monitor in a randomized block design. Significant relations were found between the parameters of the ramp-and-hold lip force task and target force level, including the peak rate of force change (dF/dt max ), peak force, and the criterion percentage of force within ±5% of target during the contraction hold phase. A significant performance advantage was found among these force variables for the thumb-index finger over the lower lip. The maximum voluntary compression force (MVCF) task revealed highly significant differences in force output between the thumb-index fingers and lower lip (∼4.47-4.70 times greater for the digits versus lower lip), a significant advantage of the right thumb-index finger over the non-dominant left thumb-index finger (12% and 25% right hand advantage for males and females, respectively), and a significant sex difference (∼1.65-1.73 times greater among males). Copyright © 2018 Elsevier Ltd. All rights reserved.

QR Codes as Finding Aides: Linking Electronic and Print Library Resources

ERIC Educational Resources Information Center

Kane, Danielle; Schneidewind, Jeff

2011-01-01

As part of a focused, methodical, and evaluative approach to emerging technologies, QR codes are one of many new technologies being used by the UC Irvine Libraries. QR codes provide simple connections between print and virtual resources. In summer 2010, a small task force began to investigate how QR codes could be used to provide information and…

Diabetes Technology-Continuous Subcutaneous Insulin Infusion Therapy and Continuous Glucose Monitoring in Adults: An Endocrine Society Clinical Practice Guideline.

PubMed

Peters, Anne L; Ahmann, Andrew J; Battelino, Tadej; Evert, Alison; Hirsch, Irl B; Murad, M Hassan; Winter, William E; Wolpert, Howard

2016-11-01

To formulate clinical practice guidelines for the use of continuous glucose monitoring and continuous subcutaneous insulin infusion in adults with diabetes. The participants include an Endocrine Society-appointed Task Force of seven experts, a methodologist, and a medical writer. The American Association for Clinical Chemistry, the American Association of Diabetes Educators, and the European Society of Endocrinology co-sponsored this guideline. The Task Force developed this evidence-based guideline using the Grading of Recommendations, Assessment, Development, and Evaluation system to describe the strength of recommendations and the quality of evidence. The Task Force commissioned one systematic review and used the best available evidence from other published systematic reviews and individual studies. One group meeting, several conference calls, and e-mail communications enabled consensus. Committees and members of the Endocrine Society, the American Association for Clinical Chemistry, the American Association of Diabetes Educators, and the European Society of Endocrinology reviewed and commented on preliminary drafts of these guidelines. Continuous subcutaneous insulin infusion and continuous glucose monitoring have an important role in the treatment of diabetes. Data from randomized controlled trials are limited on the use of medical devices, but existing studies support the use of diabetes technology for a wide variety of indications. This guideline presents a review of the literature and practice recommendations for appropriate device use.

Challenges and Opportunities in Nde, Ishm and Material State Awareness for Aircraft Structures: us Air Force Perspective

NASA Astrophysics Data System (ADS)

Buynak, C. F.; Blackshire, J.; Lindgren, E. A.; Jata, K. V.

2008-02-01

As one of the primary data and information sources in the maintenance of USAF Aging Military Fleet, NDE plays a major role in the definition and operation of maintenance processes on these aircraft. To focus new NDE developmental efforts, the AFRL NDE R&D group has the charter to research, develop and transition new capabilities to the field and depot users. This multi-faceted task is achieved through a balanced NDE and on-board sensor development program with the ultimate goal to transition technology to the Air Force user Commands. Technology requirements for NDE and Material State Awareness emerge from Air Force Initiatives to realize Condition Based Maintenance and to develop the "Depot of the Future". This evening session will present an overview of Air Force Initiatives, emerging R&D issues for Structural Health Monitoring and NDE methodologies as well as basic research initiatives within the Air Force Research Laboratory. It is intended that the session provide an open forum to pursue paths for new technology development and application.

Coordinating Federal Science, Technology, Engineering, and Mathematics (STEM) Education Investments: Progress Report. A Report from the Federal Coordination in STEM Education Task Force Committee on STEM Education National Science and Technology Council: In Response to the Requirements of the America COMPETES Reauthorization Act of 2010

ERIC Educational Resources Information Center

Executive Office of the President, 2012

2012-01-01

The America COMPETES Reauthorization Act of 2013 directs the Office of Science and Technology Policy (OSTP) to create an interagency committee under the National Science and Technology Council (NSTC) to develop a 5-year Federal science, technology, engineering, and mathematics (STEM) education strategic plan that includes: (1) annual and long-term…

Composite Overwrapped Pressure Vessels: Database Extension Task 3.0 and Impact Damage Effects Control Task 8.0

NASA Technical Reports Server (NTRS)

Beeson, Harold D.; Davis, Dennis D.; Ross, William L., Sr.; Tapphorn, Ralph M.

2002-01-01

This document represents efforts accomplished at the NASA Johnson Space Center White Sands Test Facility (WSTF) in support of the Enhanced Technology for Composite Overwrapped Pressure Vessels (COPV) Program, a joint research and technology effort among the U.S. Air Force, NASA, and the Aerospace Corporation. WSTF performed testing for several facets of the program. Testing that contributed to the Task 3.0 COPV database extension objective included baseline structural strength, failure mode and safe-life, impact damage tolerance, sustained load/impact effect, and materials compatibility. WSTF was also responsible for establishing impact protection and control requirements under Task 8.0 of the program. This included developing a methodology for establishing an impact control plan. Seven test reports detail the work done at WSTF. As such, this document contributes to the database of information regarding COPV behavior that will ensure performance benefits and safety are maintained throughout vessel service life.

An Overview of the Applied Meteorology Unit (AMU)

NASA Technical Reports Server (NTRS)

Merceret, Francis; Bauman, William; Lambert, Winifred; Short, David; Barrett, Joe; Watson, Leela

2007-01-01

The Applied Meteorology Unit (AMU) acts as a bridge between research and operations by transitioning technology to improve weather support to the Shuttle and American space program. It is a NASA entity operated under a tri-agency agreement by NASA, the US Air Force, and the National Weather Service (NWS). The AMU contract is managed by NASA, operated by ENSCO, Inc. personnel, and is collocated with Range Weather Operations at Cape Canaveral Air Force Station. The AMU is tasked by its customers in the 45th Weather Squadron, Spaceflight Meteorology Group, and the NWS in Melbourne, FL with projects whose results help improve the weather forecast for launch, landing, and ground operations. This presentation describes the history behind the formation of the AMU, its working relationships and goals, how it is tasked by its customers, and examples of completed tasks.

Leadership in Literacy for the Information Age. A Report of the Committee on Instructional Technology, National Council of Teachers of English. Executive Summary.

ERIC Educational Resources Information Center

Oates, William R., Ed.

Responding to concerns of the National Council of Teachers of English (NCTE) Task Force on Excellence in Education that current uses of computers in teaching English language arts may undercut rather than advance excellence, this report, prepared by the NCTE Committee on Instructional Technology, summarizes the committee's thoughts and…

ESHRE Task Force on Ethics and Law 21: genetic screening of gamete donors: ethical issues.

PubMed

Dondorp, W; De Wert, G; Pennings, G; Shenfield, F; Devroey, P; Tarlatzis, B; Barri, P; Diedrich, K; Eichenlaub-Ritter, U; Tüttelmann, F; Provoost, V

2014-07-01

This Task Force document explores the ethical issues involved in the debate about the scope of genetic screening of gamete donors. Calls for expanded donor screening arise against the background of both occasional findings of serious but rare genetic conditions in donors or donor offspring that were not detected through present screening procedures and the advent of new genomic technologies promising affordable testing of donors for a wide range of conditions. Ethical principles require that all stakeholders' interests are taken into account, including those of candidate donors. The message of the profession should be that avoiding all risks is impossible and that testing should remain proportional.

[Modern aspects of organization of medical support for the Armed Forces].

PubMed

Stavila, A G; Krasavin, K D; Levchenko, V N; Lemeshko, A L; Roenko, A S

2015-09-01

The challenges that medical service of the Armed Forces of the Russian Federation faces cannot be solved without a new qualitative approach to military and medical support. In order to create a complete organizational system of the medical support, consisting of united process of material flow management and management of accompanying elements, the. structure of the medical support and its equipment must correspond to performed tasks. The article describes a set of activities that are performed in the system of military-medical support and offers some promising approaches, which are supposed to solve assigned tasks imposed upon the center of pharmacy and medical technology and its interaction with superior body control, maintainable and third party organizations.

Filter Effectiveness Evaluation

DTIC Science & Technology

2013-08-01

Bramer U.S. Army TARDEC Force Projection Technologies Warren, Michigan Contract No. W56HZV-09- C -0100 (WD17-Task 7) UNCLASSIFIED...No. W56HZV-09- C -0100 (WD17-Task 7) SwRI® Project No. 08.14734.17.290 UNCLASSIFIED: Distribution Statement A. Approved for public release...W56HZV-09- C -0100 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Canant, Philip A.; Bessee, Gary B.; Hutzler, Scott A. 5d. PROJECT

A Business Case Analysis of Pre-Positioned Expeditionary Assistance Kit Joint Capability Technology Demonstration

DTIC Science & Technology

2013-12-01

of power from sunlight or a wind turbine (same solar panel tarps used in NEST Raptor Solar Light Trailer) • Global Positioning System (GPS) devices...satellite-enabled rapid wireless communications to the most critical areas and functions, working with Joint Task Forces. The first priority after the...a rapid response wireless communications system from military, civilian government, and non-government organizations. The tasks performed by HFN

The New Hampshire climate action plan : a plan for New Hampshire's energy, environmental and economic development future

DOT National Transportation Integrated Search

2009-03-01

By implementing the recommended actions of the Task Force, New Hampshire will achieve substantial emission reductions, beginning immediately, using cost-effective, available : technology. The greatest reductions would come from improvements in the bu...

Air & Space Power Journal. Volume 26, Number 1, January-February 2012

DTIC Science & Technology

2012-02-01

2 Support the Combatant Commander, Develop the Force, or Roll the Dice? What the Air Force’s Deployment Tasking Process Doesn’t Do...presents a once-in-a-generation opportunity for the Air Force to capitalize on new technology and processes that can fundamentally alter the way we do... process of turning challenges into opportuni- ties. ASPJ is charged with providing a forum in which professional Airmen can make significant contributions

Supervisory Control of a Humanoid Robot in Microgravity for Manipulation Tasks

NASA Technical Reports Server (NTRS)

Farrell, Logan C.; Strawser, Phil; Hambuchen, Kimberly; Baker, Will; Badger, Julia

2017-01-01

Teleoperation is the dominant form of dexterous robotic tasks in the field. However, there are many use cases in which direct teleoperation is not feasible such as disaster areas with poor communication as posed in the DARPA Robotics Challenge, or robot operations on spacecraft a large distance from Earth with long communication delays. Presented is a solution that combines the Affordance Template Framework for object interaction with TaskForce for supervisory control in order to accomplish high level task objectives with basic autonomous behavior from the robot. TaskForce, is a new commanding infrastructure that allows for optimal development of task execution, clear feedback to the user to aid in off-nominal situations, and the capability to add autonomous verification and corrective actions. This framework has allowed the robot to take corrective actions before requesting assistance from the user. This framework is demonstrated with Robonaut 2 removing a Cargo Transfer Bag from a simulated logistics resupply vehicle for spaceflight using a single operator command. This was executed with 80% success with no human involvement, and 95% success with limited human interaction. This technology sets the stage to do any number of high level tasks using a similar framework, allowing the robot to accomplish tasks with minimal to no human interaction.

Assessments of Fuels for Military Use Preparation and Distribution of Synthetic Fuel Blends

DTIC Science & Technology

2013-01-01

received from DLA Energy. The HRJ-8 was sourced from Centuri Technologies LP. Three separate shipments of HRJ-8 fuel (18,450 gallons) were received...of HRJ-8 was received from Centauri Technologies , LP. Three separate shipments totaling 16,382 gallons were delivered to TFLRF on January 25, 26, and...for Patsy Muzzell U.S. Army TARDEC Force Projection Technologies Warren, Michigan Contract No. W56HZV-09-C-0100 (WD0004–Tasks 1, 20, 21

The President’s Office of Science and Technology Policy: Issues for Congress

DTIC Science & Technology

2008-11-10

www.ostp.gov/galleries/default-file/OSTP%20org%20charts%2010-15-08.pdf]. This report will provide an overview of the history of science and technology...Greenwood Press, 1997). 6 Jeffrey K. Stine, A History of Science Policy in the United States, 1940-1985, Report for the House Committee on Science and...Jeffrey K. Stine, A History of Science Policy in the United States, 1940-1985, Report for the House Committee on Science and Technology Task Force on

"Time for Results": An Overview.

ERIC Educational Resources Information Center

Alexander, Lamar

1986-01-01

Summarizes the work of seven National Governors' Association task forces (on teaching, leadership, parent involvement and choice, readiness, technology, school facilities, and college quality) and the "action agenda" proposed. The governors' recent report is unique for its authorship, the tough issues tackled, and its follow-up plan.…

Hand digit control in children: motor overflow in multi-finger pressing force vector space during maximum voluntary force production.

PubMed

Shim, Jae Kun; Karol, Sohit; Hsu, Jeffrey; de Oliveira, Marcio Alves

2008-04-01

The aim of this study was to investigate the contralateral motor overflow in children during single-finger and multi-finger maximum force production tasks. Forty-five right handed children, 5-11 years of age produced maximum isometric pressing force in flexion or extension with single fingers or all four fingers of their right hand. The forces produced by individual fingers of the right and left hands were recorded and analyzed in four-dimensional finger force vector space. The results showed that increases in task (right) hand finger forces were linearly associated with non-task (left) hand finger forces. The ratio of the non-task hand finger force magnitude to the corresponding task hand finger force magnitude, termed motor overflow magnitude (MOM), was greater in extension than flexion. The index finger flexion task showed the smallest MOM values. The similarity between the directions of task hand and non-task hand finger force vectors in four-dimensional finger force vector space, termed motor overflow direction (MOD), was the greatest for index and smallest for little finger tasks. MOM of a four-finger task was greater than the sum of MOMs of single-finger tasks, and this phenomenon was termed motor overflow surplus. Contrary to previous studies, no single-finger or four-finger tasks showed significant changes of MOM or MOD with the age of children. We conclude that the contralateral motor overflow in children during finger maximum force production tasks is dependent upon the task fingers and the magnitude and direction of task finger forces.

Synthetic Fuel Blend Demonstration Program at Fort Bliss, Texas

DTIC Science & Technology

2010-05-01

A. Muzzell National Automotive Center U.S. Army RDECOM Warren, MI for U.S. Army TARDEC Force Projection Technologies Warren, Michigan...Projection Technologies Warren, Michigan Contract No. DAAE-07-99-C-L053 (WD23 – Task XII) SwRI® Project No. 08.03227.23.250 Approved for public...information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and

The Defense Science Board 2001 Summer Study on Defense Science and Technology

DTIC Science & Technology

2002-05-01

SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10 . SPONSOR/MONITOR’S ACRONYM(S) 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION...Today, it takes roughly 10 to 15 years to develop a safe drug for a specific purpose. The task force believes that it is possible for the United...performance in later screens. DSB Summer Study on Defense Science and Technology ___________________________________________ 10 The

Services and the National Information Infrastructure. Report of the Information Infrastructure Task Force Committee on Applications and Technology, Technology Policy Working Group. Draft for Public Comment.

ERIC Educational Resources Information Center

Office of Science and Technology Policy, Washington, DC.

In this report, the National Information Infrastructure (NII) services issue is addressed, and activities to advance the development of NII services are recommended. The NII is envisioned to grow into a seamless web of communications networks, computers, databases, and consumer electronics that will put vast amounts of information at users'…

75 FR 45606 - Interagency Ocean Policy Task Force-Final Recommendations of the Interagency Ocean Policy Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... COUNCIL ON ENVIRONMENTAL QUALITY Interagency Ocean Policy Task Force--Final Recommendations of the Interagency Ocean Policy Task Force AGENCY: Council on Environmental Quality. ACTION: Notice of Availability, Interagency Ocean Policy Task Force's [[Page 45607

Technology evaluation for implementation of VMT based revenue collection systems : final report.

DOT National Transportation Integrated Search

2002-11-01

The Road User Fee Task Force (RUFTF) was created as part of House Bill 3946 with the purpose of developing a new revenue collection system design for Oregons roads and highways. The Oregon Department of Transportation (ODOT) is required by House B...

PDA Cell Substrate Task Force: Emerging Technologies for Virus Detection Technical Document--A Progress Report.

PubMed

King, Kathryn; Wiebe, Michael

2011-01-01

CONFERENCE PROCEEDING Proceedings of the PDA/FDA Adventitious Viruses in Biologics: Detection and Mitigation Strategies Workshop in Bethesda, MD, USA; December 1-3, 2010 Guest Editors: Arifa Khan (Bethesda, MD), Patricia Hughes (Bethesda, MD) and Michael Wiebe (San Francisco, CA).

Technology in Parkinson disease: Challenges and Opportunities

PubMed Central

Espay, Alberto J.; Bonato, Paolo; Nahab, Fatta; Maetzler, Walter; Dean, John M.; Klucken, Jochen; Eskofier, Bjoern M.; Merola, Aristide; Horak, Fay; Lang, Anthony E.; Reilmann, Ralf; Giuffrida, Joe; Nieuwboer, Alice; Horne, Malcolm; Little, Max A.; Litvan, Irene; Simuni, Tanya; Dorsey, E. Ray; Burack, Michelle A.; Kubota, Ken; Kamondi, Anita; Godinho, Catarina; Daneault, Jean-Francois; Mitsi, Georgia; Krinke, Lothar; Hausdorff, Jeffery M.; Bloem, Bastiaan R.; Papapetropoulos, Spyros

2016-01-01

The miniaturization, sophistication, proliferation, and accessibility of technologies are enabling the capturing of more and previously inaccessible phenomena in Parkinson disease (PD). However, more information has not translated into greater understanding of disease complexity to satisfy diagnostic and therapeutic needs. Challenges include non-compatible technology platforms, the need for wide-scale and long-term deployment of sensor technology (in particular among vulnerable elderly patients), and the gap between the “big data” acquired with sensitive measurement technologies and their limited clinical application. Major opportunities could be realized if new technologies are developed as part of open-source and/or open-hardware platforms enabling multi-channel data capture, sensitive to the broad range of motor and non-motor problems that characterize PD, and adaptable into self-adjusting, individualized treatment delivery systems. The International Parkinson and Movement Disorders Society Task Force on Technology is entrusted to convene engineers, clinicians, researchers, and patients to promote the development of integrated measurement and closed-loop therapeutic systems with high patient adherence that also serve to: 1) encourage the adoption of clinico-pathophysiologic phenotyping and early detection of critical disease milestones; 2) enhance tailoring of symptomatic therapy; 3) improve subgroup targeting of patients for future testing of disease modifying treatments; and 4) identify objective biomarkers to improve longitudinal tracking of impairments in clinical care and research. This article summarizes the work carried out by the Task Force toward identifying challenges and opportunities in the development of technologies with potential for improving the clinical management and quality of life of individuals with PD. PMID:27125836

Technologies for Developing Predictive Atomistic and Coarse-Grained Force Fields for Ionic Liquid Property Prediction

DTIC Science & Technology

2008-07-29

studied are set to zero and a constrained MM minimization is performed. It is critical that all other force field parameters (for bonds, angles, charges...identifying the symmetry of the problem and tailoring the parameterization accordingly may be critical . For Phase I, the above described procedure was...tasks and the evaluation of their properties. The tremendous number of possible ionic liquids that are within reach makes it critical that a reliable

The Synthesis of Force Closure Grasps in the Plane.

DTIC Science & Technology

1985-09-01

TASK U Artificial Inteligence Laboratory AREA A WORK UN IT "NMUIERS ~( 545 Technology Square Cambridge, MA 02139 SI. CONTROLLING OFICE NAME ANO... ARTIFICIAL INThLLIX’ ENCE LABORATORY A. 1. Memo 861 September, 1985 The Synthesis of Force-Closure Grasps In the Plane DTIC ’VeL% ,#ECTE 1 VnDcNguyenU Abstract... Artificial In- telligenmcc Liabomatory of thle Massachuset Is hInsttute of Teclhnolog3 . Support for the Lahoratot * s Artificial Intelligence research is

Lights, Camera, Action: Getting Back to the Basics

DTIC Science & Technology

2009-02-01

Donald Baucom, author of “The Professional Soldier and the Warrior Spirit,” asserts that the military leans towards technology, and leaders who...CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR (S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING...of the author and do not necessarily represent the views of the Air Force Research Institute, the United States Air Force, the Department of Defense

ACCF/AHA methodology for the development of quality measures for cardiovascular technology: a report of the American College of Cardiology Foundation/American Heart Association Task Force on Performance Measures.

PubMed

Bonow, Robert O; Douglas, Pamela S; Buxton, Alfred E; Cohen, David J; Curtis, Jeptha P; Delong, Elizabeth; Drozda, Joseph P; Ferguson, T Bruce; Heidenreich, Paul A; Hendel, Robert C; Masoudi, Frederick A; Peterson, Eric D; Taylor, Allen J

2011-09-27

Consistent with the growing national focus on healthcare quality, the American College of Cardiology Foundation (ACCF) and the American Heart Association (AHA) have taken a leadership role over the past decade in developing measures of the quality of cardiovascular care by convening a joint ACCF/AHA Task Force on Performance Measures. The Task Force is charged with identifying the clinical topics appropriate for the development of performance measures and with assembling writing committees composed of clinical and methodological experts in collaboration with appropriate subspecialty societies. The Task Force has also created methodology documents that offer guidance in the development of process, outcome, composite, and efficiency measures. Cardiovascular performance measures using existing ACCF/AHA methodology are based on Class I or Class III guidelines recommendations, usually with Level A evidence. These performance measures, based on evidence-based ACCF/AHA guidelines, remain the most rigorous quality measures for both internal quality improvement and public reporting. However, many of the tools for diagnosis and treatment of cardiovascular disease involve advanced technologies, such as cardiac imaging, for which there are often no underlying guideline documents. Because these technologies affect the quality of cardiovascular care and also have the potential to contribute to cardiovascular health expenditures, there is a need for more critical assessment of the use of technology, including the development of quality and performance measures in areas in which guideline recommendations are absent. The evaluation of quality in the use of cardiovascular technologies requires consideration of multiple parameters that differ from other healthcare processes. The present document describes methodology for development of 2 new classes of quality measures in these situations, appropriate use measures and structure/safety measures. Appropriate use measures are based on specific indications, processes, or parameters of care for which high level of evidence data and Class I or Class III guideline recommendations may be lacking but are addressed in ACCF appropriate use criteria documents. Structure/safety measures represent measures developed to address structural aspects of the use of healthcare technology (e.g., laboratory accreditation, personnel training, and credentialing) or quality issues related to patient safety when there are neither guidelines recommendations nor appropriate use criteria. Although the strength of evidence for appropriate use measures and structure/safety measures may not be as strong as that for formal performance measures, they are quality measures that are otherwise rigorously developed, reviewed, tested, and approved in the same manner as ACCF/AHA performance measures. The ultimate goal of the present document is to provide direction in defining and measuring the appropriate use-avoiding not only underuse but also overuse and misuse-and proper application of cardiovascular technology and to describe how such appropriate use measures and structure/safety measures might be developed for the purposes of quality improvement and public reporting. It is anticipated that this effort will help focus the national dialogue on the use of cardiovascular technology and away from the current concerns about volume and cost alone to a more holistic emphasis on value.

76 FR 60863 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-30

...] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: This notice announces a meeting of the Aquatic Nuisance Species Task Force (ANS Task Force). The ANS Task Force's purpose is to develop and implement a program for U.S. waters to prevent...

78 FR 29378 - Aquatic Nuisance Species Task Force; Public Teleconference/Webinar

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

...-FF09F14000-134] Aquatic Nuisance Species Task Force; Public Teleconference/ Webinar AGENCY: Fish and Wildlife... teleconference/webinar of the Aquatic Nuisance Species Task Force (ANS Task Force). The ANS Task Force's purpose... aquatic nuisance species; to monitor, control, and study such species; and to disseminate related...

Keepin' On: Five Years Down the Road to Better Schools. Reports of the Task Force on Improving Kentucky's Schools and the Task Force on Restructuring Time and Learning.

ERIC Educational Resources Information Center

Prichard Committee for Academic Excellence, Lexington, KY.

This report contains the findings of two task forces established during 1994 by the Prichard Committee for Academic Excellence: (1) the Task Force on Improving Kentucky Schools; and (2) the Task Force on Restructuring Time and Learning. The task forces, comprised of parents and business members of the Prichard Committee, examined key elements of…

Grip force and force sharing in two different manipulation tasks with bottles.

PubMed

Cepriá-Bernal, Javier; Pérez-González, Antonio; Mora, Marta C; Sancho-Bru, Joaquín L

2017-07-01

Grip force and force sharing during two activities of daily living were analysed experimentally in 10 right-handed subjects. Four different bottles, filled to two different levels, were manipulated for two tasks: transporting and pouring. Each test subject's hand was instrumented with eight thin wearable force sensors. The grip force and force sharing were significantly different for each bottle model. Increasing the filling level resulted in an increase in grip force, but the ratio of grip force to load force was higher for lighter loads. The task influenced the force sharing but not the mean grip force. The contributions of the thumb and ring finger were higher in the pouring task, whereas the contributions of the palm and the index finger were higher in the transport task. Mean force sharing among fingers was 30% for index, 29% for middle, 22% for ring and 19% for little finger. Practitioner Summary: We analysed grip force and force sharing in two manipulation tasks with bottles: transporting and pouring. The objective was to understand the effects of the bottle features, filling level and task on the contribution of different areas of the hand to the grip force. Force sharing was different for each task and the bottles features affected to both grip force and force sharing.

PRN 94-9: Announcing the Formation of Two Industry-Wide Task Forces: Agricultural Reentry Task Force and Outdoor Residential Exposure Task Force

EPA Pesticide Factsheets

This Notice announces two industry-wide Task Forces being formed in response to generic exposure data requirements. It contains EPA's policy on a registrant's options for, and responsibilities when joining Task Force as a way to satisfy data requirements.

78 FR 60306 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-01

...-FF09F14000-134] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and Wildlife Service, Interior... the Aquatic Nuisance Species (ANS) Task Force. The ANS Task Force's purpose is to develop and... Task Force will meet from 8 a.m. to 4:30 p.m. on Wednesday, November 6, through Thursday, November 7...

Training Decisions Technology Analysis

DTIC Science & Technology

1992-06-01

4.5.1 Relational Data Base Management 69 4.5.2 TASCS Data Content 69 4.5.3 Relationships with TDS 69 4.6 Other Air Force Modeling R&D 70 4.6.1 Time ...executive decision making were first developed by M. S. Scott Morton in the early 1970’s who, at that time , termed them " management decision systems" (Scott...Allocations to Training Settings o Managers ’ Preferences for Task Allocations to Training Settings o Times Required to Training Tasks in Various

Automobile Engine Development, Task Force Assessment, Preliminary Report.

ERIC Educational Resources Information Center

Caretto, L. S.; And Others

This report presents a comprehensive survey of current knowledge and ongoing research and development projects in the area of vehicular emissions and control. Information provided attempts to answer the questions: how can proposed standards be met with existing technology and what additional research would be required to obtain desired control…

Five-Year Technology Plan. Educational Planning Center.

ERIC Educational Resources Information Center

Virginia Beach City Public Schools, VA.

This 5-year plan is based on "A Comprehensive Plan for Instructional and Administrative Use of Computers in the Virginia Beach Public Schools" ("The Pogrow Report," completed in December 1984) and the "Task Force Report on Information Systems" (completed in July 1988). These reports document the importance of making…

Armored Family of Vehicles (AFV) Automation and Communication. Resource Management Plan (ACRMP). Phase 1. Volume 15.

DTIC Science & Technology

1987-09-01

The AFV ACRMP is the Task Force Director’s (08) tool to manage command, control, communication (C3) automation system life cycle developments for the...responsibilities, development management, acquisition strategy, testing , life cycle support, technology assessment and work group relationships. ACRMP

Alternative Education: The Cutting Edge?

ERIC Educational Resources Information Center

Byrne, Jay

2004-01-01

Miami Valley Career Technology Youth Connections, an alternative high school located in Dayton, Ohio, has an enrollment of 160 students and was created as a joint venture among local politicians to address the high dropout rates in Montgomery County, Ohio. To achieve this, the Montgomery County commissioners created a task force to develop…

In Defense of Science.

ERIC Educational Resources Information Center

Handler, Philip

Although there are social pressures for the control of science, forcing a redirection to "relevant" problem solving tasks, the future needs are, in essence, unpredictable in detail. For this reason fundamental research is necessary to provide the appropriate base for the new technologies that human society will need. Even to solve the present…

Panel Urges Colleges to Boost Production of Minority Scientists.

ERIC Educational Resources Information Center

DeLoughry, Thomas J.

1988-01-01

The congressionally appointed Task Force on Women, Minorities, and the Handicapped in Science and Technology calls for cooperation among schools, colleges, industry, and federal and state governments to increase the pool of science and engineering talent through programs similar to those following the Soviet launch of Sputnik in 1957. (MLW)

Southern European Task Force (SETAF)/US Army Africa Science and Technology Overview

DTIC Science & Technology

2009-06-01

Translator ( VRT ) • Problem: – SETAF needs a language translation device for multiple African languages • Discussion: – Worked with PM Sequoyah to identify...potential solutions – Recommended VRT as best potential solution – Provides eyes-free, hands-free, voice-to-voice language translation

Resilience and Risk

ERIC Educational Resources Information Center

Brackenreed, Darlene

2010-01-01

In the age of the human Genome Project wide spread prodigious information technology, our system of education is unable to keep pace with and meet the demands for knowledge, skills, and identification and treatment of academic, emotional, social, mental and health concerns of our youth. As the Saskatchewan task force on the state of education in…

Technology Development Plan for Design Guidelines for Wave-Induced Hydrodynamic Loading on Structures.

DTIC Science & Technology

1984-03-01

coast), indicate this trend will continue. In addition, further loss of foreign bases is possible, as well as an increase in political restrictions on...endeavors to extend wave forces prediction technology. Numerous other government agencies (both U.S. and foreign ) and private industry investigations...then be included easily in existing NAVFAC documents. The sequence of the task scheduling is important to optimize the exchange of information among

Department of Defense Research, Development, Test, and Evaluation (RDT and E): Appropriations Structure

DTIC Science & Technology

2016-12-13

Task Force on Defense Science and Technology Base for the 21st Century, June 1998. Appropriations Structure of Defense RDT&E Congressional Research...Technology Base for the 21st Century, June 1998. 22 Ibid, p. 45. Appropriations Structure of Defense RDT&E Congressional Research Service 18 Applied...funding streams. Among the many other factors that may affect the effectiveness of the performance of RDT&E are: organizational structures and

Report of the Task Force for Improved Coordination of the DoD Science and Technology Program. Volume 2. Reports of the Working Groups. Working Group A: Strategic Planning. Working Group B: Program Coordination. Working Group C: Advocacy

DTIC Science & Technology

1988-08-01

OperabllY 19 Technolofy Area Summaries 20 Major Technology Thrws 21 Air Force S&T Investment Summary 25 Program Objectives 28 Glcazy 30 1. D-6 TH~E...8217lRI-TAC Advrane Plannzn Sy-i Mulima Radio AWAM3 IRP JSTARS fris MmAvne Anhn ABOCC 37=6 Comb !dftica~ S~ Surance Radar Ewm EAVZ SYNC Media . R~u... Social Sciences 5001 Eisenhower Avenue Alexandria VA 22333-5600 Col. Harry G. Dangerfield Telephone: (301) 663-7443 Executive Assistant to the PEO for

Report of the SSME assessment team

NASA Technical Reports Server (NTRS)

1993-01-01

In response to a request from the House of Representatives Committee on Science, Space, and Technology in its Report No. 102-500 of April 22, 1992, the Aerospace Safety Advisory Panel (ASAP) created an ad hoc task force to conduct a thorough assessment of the Space Shuttle Main Engine (SSME). The membership was drawn mostly from organizations other than ASAP, and this report represents the views of that task force. Its task was to assess the risk that the SSME poses to the safe operation of the Space Shuttle, to identify and evaluate improvements to the engine that would reduce the risk, and to recommend a set of priorities for the implementation of these improvements. The SSME Assessment Team, as it opted to call itself, convened in mid-1992 and, subsequently, met with and gathered information from all the principal organizations involved in the SSME program. These included the Rocketdyne Division of Rockwell International, the Marshall Space Flight Center of NASA, and the Pratt & Whitney Division of United Technologies Corporation. The information in this report reflects the program status as of October 1992. From the information received, the Team formed its conclusions and recommendations. Changes in the program status have, of course, occurred since that time; however, they did not affect the Team's conclusions and recommendations.

United States Air Force Academy Annual Research Report: July 2003 to June 2004

DTIC Science & Technology

2004-06-01

Specifically, the stylus input device Technology allows students to electronically annotate their on-line (AFIIT) textbooks and note pages. These Tablet ...submissions "just-in-time" to adjust the classroom lesson to suit the students’ needs. Now adopted by over 300 faculty in some 25 disciplines at over 100...cognition theories to the Foreign Language Classroom . Using a real Joint Task Force (JTF) Deployment as a model, a simulation was designed to place cadets as

An Attitude Survey Analysis of CONUS Air Force Jet Propulsion Technicians Towards the Warranted Tool Program.

DTIC Science & Technology

1983-09-01

Reyer’s research 12 . I -’. .. - n -l l--" (11:1), of "scrounging" from another worker’s tool box. As a consequence, control and accounting procedures...PPOGPAM $ELEMENT. PROJECT, TASK School of Systems and Logistics APEA A WORK UNIT NUMBERS Air Force Institute of Technology, WPAFBO1 II. CONTROLLING ...thesis analyzes those attitudes by evaluating the collected data from the AFLMC questionnaire and this research team’s telephone interviews. The

Hypoxia in the Northern Gulf of Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dale, Virginia H

2010-01-01

Since 1985, scientists have been documenting a hypoxic zone in the Gulf of Mexico each year. The hypoxic zone, an area of low dissolved oxygen that cannot support marine life, generally manifests itself in the spring. Since marine species either die or flee the hypoxic zone, the spread of hypoxia reduces the available habitat for marine species, which are important for the ecosystem as well as commercial and recreational fishing in the Gulf. Since 2001, the hypoxic zone has averaged 16,500 km{sup 2} during its peak summer months, an area slightly larger than the state of Connecticut, and ranged frommore » a low of 8,500 km{sup 2} to a high of 22,000 km{sup 2}. To address the hypoxia problem, the Mississippi River/Gulf of Mexico Watershed Nutrient Task Force (or Task Force) was formed to bring together representatives from federal agencies, states, and tribes to consider options for responding to hypoxia. The Task Force asked the White House Office of Science and Technology Policy to conduct a scientific assessment of the causes and consequences of Gulf hypoxia through its Committee on Environment and Natural Resources (CENR). In 2000 the CENR completed An Integrated Assessment: Hypoxia in the Northern Gulf of Mexico (or Integrated Assessment), which formed the scientific basis for the Task Force's Action Plan for Reducing, Mitigating, and Controlling Hypoxia in the Northern Gulf of Mexico (Action Plan, 2001). In its Action Plan, the Task Force pledged to implement ten management actions and to assess progress every 5 years. This reassessment would address the nutrient load reductions achieved, the responses of the hypoxic zone and associated water quality and habitat conditions, and economic and social effects. The Task Force began its reassessment in 2005. In 2006 as part of the reassessment, USEPA's Office of Water, on behalf of the Task Force, requested that the U.S. Environmental Protection Agency (USEPA) Science Advisory Board (SAB) convene an independent panel to evaluate the state-of-the-science regarding hypoxia in the Northern Gulf of Mexico and potential nutrient mitigation and control options in the Mississippi-Atchafalaya River basin (MARB). The Task Force was particularly interested in scientific advances since the Integrated Assessment and posed questions in three areas: characterization of hypoxia; nutrient fate, transport and sources; and the scientific basis for goals and management options. The Hypoxia Study Group began its deliberations in September of 2006 and completed its report in August of 2007 while operating under the 'sunshine' requirements of the Federal Advisory Committee Act, which include providing public access to advisory meetings and opportunities for public comment. This Executive Summary summarizes the Hypoxia Study Group's major findings and recommendations.« less

Advanced rotorcraft technology: Task force report

NASA Technical Reports Server (NTRS)

1978-01-01

The technological needs and opportunities related to future civil and military rotorcraft were determined and a program plan for NASA research which was responsive to the needs and opportunities was prepared. In general, the program plan places the primary emphasis on design methodology where the development and verification of analytical methods is built upon a sound data base. The four advanced rotorcraft technology elements identified are aerodynamics and structures, flight control and avionic systems, propulsion, and vehicle configurations. Estimates of the total funding levels that would be required to support the proposed program plan are included.

77 FR 61019 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-05

..., Cost Center: FF09F14000, Fund: 134] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and... Aquatic Nuisance Species (ANS) Task Force. The ANS Task Force's purpose is to develop and implement a.... DATES: The ANS Task Force will meet from 8:30 a.m. to 5:00 p.m. Wednesday November 14, and from 8:30 a.m...

Task specific grip force control in writer's cramp.

PubMed

Schneider, A S; Fürholzer, W; Marquardt, C; Hermsdörfer, J

2014-04-01

Writer's cramp is defined as a task specific focal dystonia generating hypertonic muscle co-contractions during handwriting resulting in impaired writing performance and exaggerated finger force. However, little is known about the generalisation of grip force across tasks others than writing. The aim of the study was to directly compare regulation of grip forces during handwriting with force regulation in other fine-motor tasks in patients and control subjects. Handwriting, lifting and cyclic movements of a grasped object were investigated in 21 patients and 14 controls. The applied forces were registered in all three tasks and compared between groups and tasks. In addition, task-specific measures of fine-motor skill were assessed. As expected, patients generated exaggerated forces during handwriting compared to control subjects. However there were no statistically significant group differences during lifting and cyclic movements. The control group revealed a generalisation of grip forces across manual tasks whereas in patients there was no such correlation. We conclude that increased finger forces during handwriting are a task-specific phenomenon that does not necessarily generalise to other fine-motor tasks. Force control of patients with writer's cramp in handwriting and other fine-motor tasks is characterised by individualised control strategies. Copyright © 2013 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Task oriented nonlinear control laws for telerobotic assembly operations

NASA Technical Reports Server (NTRS)

Walker, R. A.; Ward, L. S.; Elia, C. F.

1987-01-01

The goal of this research is to achieve very intelligent telerobotic controllers which are capable of receiving high-level commands from the human operator and implementing them in an adaptive manner in the object/task/manipulator workspace. Initiatives by the authors at Integrated Systems, Inc. to identify and develop the key technologies necessary to create such a flexible, highly programmable, telerobotic controller are presented. The focus of the discussion is on the modeling of insertion tasks in three dimensions and nonlinear implicit force feedback control laws which incorporate tool/workspace constraints. Preliminary experiments with dual arm beam assembly in 2-D are presented.

76 FR 22685 - Interagency Management Task Force Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... Force Public Meeting AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy (DOE... meetings of the Interagency Energy Management Task Force (Task Force) in 2011. FEMP intends to hold recurring public meetings of the Task Force. Interested parties can check http://www.femp.energy.gov/news...

Mapping to Estimate Health-State Utility from Non-Preference-Based Outcome Measures: An ISPOR Good Practices for Outcomes Research Task Force Report.

PubMed

Wailoo, Allan J; Hernandez-Alava, Monica; Manca, Andrea; Mejia, Aurelio; Ray, Joshua; Crawford, Bruce; Botteman, Marc; Busschbach, Jan

2017-01-01

Economic evaluation conducted in terms of cost per quality-adjusted life-year (QALY) provides information that decision makers find useful in many parts of the world. Ideally, clinical studies designed to assess the effectiveness of health technologies would include outcome measures that are directly linked to health utility to calculate QALYs. Often this does not happen, and even when it does, clinical studies may be insufficient for a cost-utility assessment. Mapping can solve this problem. It uses an additional data set to estimate the relationship between outcomes measured in clinical studies and health utility. This bridges the evidence gap between available evidence on the effect of a health technology in one metric and the requirement for decision makers to express it in a different one (QALYs). In 2014, ISPOR established a Good Practices for Outcome Research Task Force for mapping studies. This task force report provides recommendations to analysts undertaking mapping studies, those that use the results in cost-utility analysis, and those that need to critically review such studies. The recommendations cover all areas of mapping practice: the selection of data sets for the mapping estimation, model selection and performance assessment, reporting standards, and the use of results including the appropriate reflection of variability and uncertainty. This report is unique because it takes an international perspective, is comprehensive in its coverage of the aspects of mapping practice, and reflects the current state of the art. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Telematic Infrastructures for Flexible and Distance Learning "Electronic Universities." A Report from DELTA Workshops on Telematic Networks for Distance Education and Training "Electronic Universities" and on Learning Technology (October 1990, November 1990).

ERIC Educational Resources Information Center

Moller, Morten, Ed.; Shaughnessy, Haydn, Ed.

This report is based on contributions to two workshops arranged jointly by Task Force Human Resources and the DELTA (Developing European Learning through Technological Advance) Unit. The purpose of collecting these papers was to provide an overview of the implications of the DELTA Exploratory Action outcomes for future research. After the preface…

The Imperative to Integrate Air Force Command and Control Systems into Maritime Plans

DTIC Science & Technology

2014-08-01

coopera- tion with existing C2 plans? Table. Components of C2 systems and plans C2 Systems C2 Plans People Competencies Platforms Technologies Doctrine...Intent Authorities Functions Tasks Effects C2 Systems The requirements for such a system can be expressed in terms of its components: people ...competencies, platforms, technologies, and doc- trine. The people connect to the human elements of war and leverage their particular knowledge and skills that

Air Force construction automation/robotics

NASA Technical Reports Server (NTRS)

Nease, A. D.; Alexander, E. F.

1993-01-01

The Air Force has several missions which generate unique requirements that are being met through the development of construction robotic technology. One especially important mission will be the conduct of Department of Defense (DOD) space activities. Space operations and other missions place construction/repair equipment operators in dangerous environments and potentially harmful situations. Additionally, force reductions require that human resources be leveraged to the maximum extent possible, and more stringent construction repair requirements push for increased automation. To solve these problems, the U.S. Air Force is undertaking a research and development effort at Tyndall AFB, FL, to develop robotic construction/repair equipment. This development effort involves the following technologies: teleoperation, telerobotics, construction operations (excavation, grading, leveling, tool change), robotic vehicle communications, vehicle navigation, mission/vehicle task control architecture, and associated computing environment. The ultimate goal is the fielding of a robotic repair capability operating at the level of supervised autonomy. This paper will discuss current and planned efforts in space construction/repair, explosive ordnance disposal, hazardous waste cleanup, and fire fighting.

75 FR 20578 - Federal Advisory Committee; Defense Health Board (DHB); Department of Defense Task Force on the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

... (DHB); Department of Defense Task Force on the Prevention of Suicide by Members of the Armed Forces... announces a meeting of the Department of Defense Task Force on the Prevention of Suicide by Members of the... Secretary, Department of Defense Task Force on the Prevention of Suicide by Members of the Armed Forces, One...

Recent Weather Technologies Delivered to America's Space Program by the Applied Meteorology Unit

NASA Technical Reports Server (NTRS)

Bauman, WIlliam, H., III; Crawford, Winifred

2009-01-01

The Applied Meteorology Unit (AMU) is a unique joint venture of NASA, the Air Force and the National Weather Service (NWS) and has been supporting the Space Program for nearly two decades. The AMU acts as a bridge between the meteorological research community and operational forecasters by developing, evaluating and transitioning new technology and techniques to improve weather support to spaceport operations at the Eastern Range (ER) and Kennedy Space Center. Its primary customers are the 45th Weather Squadron at Cape Canaveral Air Force Station (CCAFS), the Spaceflight Meteorology Group at Johnson Space Center and the National Weather Service Office in Melbourne, FL. Its products are used to support NASA's Shuttle and ELV programs as well as Department of Defense and commercial launches from the ER. Shuttle support includes landing sites beyond the ER. The AMU is co-located with the Air Force operational forecasters at CCAFS to facilitate continuous two-way interaction between the AMU and its operational customers. It is operated under a NASA, Air Force, and NWS Memorandum of Understanding (MOU) by a competitively-selected contractor. The contract, which is funded and managed by NASA, provides five full time professionals with degrees in meteorology or related fields, some of whom also have operational experience. NASA provides a Ph.D.- level NASA civil service scientist as Chief of the AMU. The AMU is tasked by its customers through a unique, nationally recognized process. The tasks are limited to development, evaluation and operational transition of technology to improve weather support to spaceport operations and providing expert advice to the customers. The MOU expressly forbids using the AMU resources to conduct operations or do basic research. The presentation will provide a brief overview of the AMU and how it is tasked by its customers to provide high priority products and services. The balance of the presentation will cover a sampling of products delivered over the last 18 years that are currently in operational use. Each example will describe the problem to be solved, the solution provided, and the operational benefits of implementing that solution.

A force-controllable macro-micro manipulator and its application to medical robots

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.; Uecker, Darrin R.; Wang, Yulun

1994-01-01

This paper describes an 8-degrees-of-freedom macro-micro robot. This robot is capable of performing tasks that require accurate force control, such as polishing, finishing, grinding, deburring, and cleaning. The design of the macro-micro mechanism, the control algorithms, and the hardware/software implementation of the algorithms are described in this paper. Initial experimental results are reported. In addition, this paper includes a discussion of medical surgery and the role that force control may play. We introduce a new class of robotic systems collectively called Robotic Enhancement Technology (RET). RET systems introduce the combination of robotic manipulation with human control to perform manipulation tasks beyond the individual capability of either human or machine. The RET class of robotic systems offers new challenges in mechanism design, control-law development, and man/machine interface design. We believe force-controllable mechanisms such as the macro-micro structure we have developed are a necessary part of RET. Work in progress in the area of RET systems and their application to minimally invasive surgery is presented, along with future research directions.

Technology in Parkinson's disease: Challenges and opportunities.

PubMed

Espay, Alberto J; Bonato, Paolo; Nahab, Fatta B; Maetzler, Walter; Dean, John M; Klucken, Jochen; Eskofier, Bjoern M; Merola, Aristide; Horak, Fay; Lang, Anthony E; Reilmann, Ralf; Giuffrida, Joe; Nieuwboer, Alice; Horne, Malcolm; Little, Max A; Litvan, Irene; Simuni, Tanya; Dorsey, E Ray; Burack, Michelle A; Kubota, Ken; Kamondi, Anita; Godinho, Catarina; Daneault, Jean-Francois; Mitsi, Georgia; Krinke, Lothar; Hausdorff, Jeffery M; Bloem, Bastiaan R; Papapetropoulos, Spyros

2016-09-01

The miniaturization, sophistication, proliferation, and accessibility of technologies are enabling the capture of more and previously inaccessible phenomena in Parkinson's disease (PD). However, more information has not translated into a greater understanding of disease complexity to satisfy diagnostic and therapeutic needs. Challenges include noncompatible technology platforms, the need for wide-scale and long-term deployment of sensor technology (among vulnerable elderly patients in particular), and the gap between the "big data" acquired with sensitive measurement technologies and their limited clinical application. Major opportunities could be realized if new technologies are developed as part of open-source and/or open-hardware platforms that enable multichannel data capture sensitive to the broad range of motor and nonmotor problems that characterize PD and are adaptable into self-adjusting, individualized treatment delivery systems. The International Parkinson and Movement Disorders Society Task Force on Technology is entrusted to convene engineers, clinicians, researchers, and patients to promote the development of integrated measurement and closed-loop therapeutic systems with high patient adherence that also serve to (1) encourage the adoption of clinico-pathophysiologic phenotyping and early detection of critical disease milestones, (2) enhance the tailoring of symptomatic therapy, (3) improve subgroup targeting of patients for future testing of disease-modifying treatments, and (4) identify objective biomarkers to improve the longitudinal tracking of impairments in clinical care and research. This article summarizes the work carried out by the task force toward identifying challenges and opportunities in the development of technologies with potential for improving the clinical management and the quality of life of individuals with PD. © 2016 International Parkinson and Movement Disorder Society. © 2016 International Parkinson and Movement Disorder Society.

75 FR 21603 - Renewal of Department of Defense Federal Advisory Committee; Missouri River (North Dakota) Task...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

...-6128. SUPPLEMENTARY INFORMATION: The Task Force is a non-discretionary Federal advisory committee and... Committee; Missouri River (North Dakota) Task Force AGENCY: Department of Defense (DoD). ACTION: Renewal of... Missouri River (North Dakota) Task Force (hereafter referred to as the Task Force). FOR FURTHER INFORMATION...

Force fluctuations while pressing and moving against high- and low-friction touch screen surfaces.

PubMed

Joshi, Mukta N; Keenan, Kevin G

2016-07-01

The purpose of this study was to identify the influence of a high- and low-friction surface on the ability to maintain a steady downward force during an index finger pressing and moving task. Fifteen right-handed subjects (24-48 years) performed a static force pressing task and a hybrid pressing and moving task on the surface of an iPad mini while holding a steady 2-N force on high- and low-friction surfaces. Variability of force was quantified as the standard deviation (SD) of normal force (F z) and shear force (F xy) across friction conditions and tasks. The SD of F z was 227 % greater during the hybrid task as compared to the static task (p < .001) and was 19 % greater for the high- versus low-friction condition (p = .033). There were positive correlations between SD of F z and F xy during the hybrid force/motion tasks on the high- and low-friction conditions (r (2) = 0.5 and 0.86, respectively), suggesting significant associations between normal and shear forces for this hybrid task. The correlation between the SD of F z for static and hybrid tasks was r (2) = 0.44, indicating that the common practice of examining the control of static tasks may not sufficiently explain performance during hybrid tasks, at least for the young subjects tested in the current study. As activities of daily living frequently require hybrid force/motion tasks (e.g., writing, doing the dishes, and cleaning counters), the results of this study emphasize the need to study motor performance during hybrid tasks in addition to static force tasks.

Conversion of School Nurse Policy and Procedure Manual to Electronic Format

ERIC Educational Resources Information Center

Randall, Joellyn; Knee, Rachel; Galemore, Cynthia

2006-01-01

Policy and procedure manuals are essential to establishing standards of practice and ensuring quality of care to students and families. The Olathe District Schools (Kansas) Technology Department created the Virtual File Cabinet to provide online access to employee policies, school board policies, forms, and other documents. A task force of school…

3 CFR - Task Force on Space Industry Workforce and Economic Development

Code of Federal Regulations, 2011 CFR

2011-01-01

... Director of the Office of Science and Technology Policy[, and] the Director of the National Economic Council My Administration is committed to implementing a bold, new approach to human spaceflight... new jobs. NASA's budget also includes $429 million next year, and $1.9 billion over the next 5 years...

U.S. Northern Command > Newsroom > Fact Sheets

Science.gov Websites

Operations Command, North U.S. Marine Forces Northern Command U.S. Fleet Forces Command Air Forces Northern U.S. Army North Joint Task Force North Joint Task Force Civil Support Joint Task Force Alaska Joint

Proximal arm kinematics affect grip force-load force coordination

PubMed Central

Vermillion, Billy C.; Lum, Peter S.

2015-01-01

During object manipulation, grip force is coordinated with load force, which is primarily determined by object kinematics. Proximal arm kinematics may affect grip force control, as proximal segment motion could affect control of distal hand muscles via biomechanical and/or neural pathways. The aim of this study was to investigate the impact of proximal kinematics on grip force modulation during object manipulation. Fifteen subjects performed three vertical lifting tasks that involved distinct proximal kinematics (elbow/shoulder), but resulted in similar end-point (hand) trajectories. While temporal coordination of grip and load forces remained similar across the tasks, proximal kinematics significantly affected the grip force-to-load force ratio (P = 0.042), intrinsic finger muscle activation (P = 0.045), and flexor-extensor ratio (P < 0.001). Biomechanical coupling between extrinsic hand muscles and the elbow joint cannot fully explain the observed changes, as task-related changes in intrinsic hand muscle activation were greater than in extrinsic hand muscles. Rather, between-task variation in grip force (highest during task 3) appears to contrast to that in shoulder joint velocity/acceleration (lowest during task 3). These results suggest that complex neural coupling between the distal and proximal upper extremity musculature may affect grip force control during movements, also indicated by task-related changes in intermuscular coherence of muscle pairs, including intrinsic finger muscles. Furthermore, examination of the fingertip force showed that the human motor system may attempt to reduce variability in task-relevant motor output (grip force-to-load force ratio), while allowing larger fluctuations in output less relevant to task goal (shear force-to-grip force ratio). PMID:26289460

78 FR 23970 - Interagency Task Force on Veterans Small Business Development

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force Meeting. SUMMARY: This document corrects the SBA's Interagency Task Force on Veterans Small Business Developments...

ACCF/AHA methodology for the development of quality measures for cardiovascular technology: a report of the American College of Cardiology Foundation/American Heart Association Task Force on Performance Measures.

PubMed

Bonow, Robert O; Douglas, Pamela S; Buxton, Alfred E; Cohen, David J; Curtis, Jeptha P; Delong, Elizabeth; Drozda, Joseph P; Ferguson, T Bruce; Heidenreich, Paul A; Hendel, Robert C; Masoudi, Frederick A; Peterson, Eric D; Taylor, Allen J

2011-09-27

Consistent with the growing national focus on healthcare quality, the American College of Cardiology Foundation (ACCF) and the American Heart Association (AHA) have taken a leadership role over the past decade in developing measures of the quality of cardiovascular care by convening a joint ACCF/AHA Task Force on Performance Measures. The Task Force is charged with identifying the clinical topics appropriate for the development of performance measures and with assembling writing committees composed of clinical and methodological experts in collaboration with appropriate subspecialty societies. The Task Force has also created methodology documents that offer guidance in the development of process, outcome, composite, and efficiency measures. Cardiovascular performance measures using existing ACCF/AHA methodology are based on Class I or Class III guidelines recommendations, usually with Level A evidence. These performance measures, based on evidence-based ACCF/AHA guidelines, remain the most rigorous quality measures for both internal quality improvement and public reporting. However, many of the tools for diagnosis and treatment of cardiovascular disease involve advanced technologies, such as cardiac imaging, for which there are often no underlying guideline documents. Because these technologies affect the quality of cardiovascular care and also have the potential to contribute to cardiovascular health expenditures, there is a need for more critical assessment of the use of technology, including the development of quality and performance measures in areas in which guideline recommendations are absent. The evaluation of quality in the use of cardiovascular technologies requires consideration of multiple parameters that differ from other healthcare processes. The present document describes methodology for development of 2 new classes of quality measures in these situations, appropriate use measures and structure/safety measures. Appropriate use measures are based on specific indications, processes, or parameters of care for which high level of evidence data and Class I or Class III guideline recommendations may be lacking but are addressed in ACCF appropriate use criteria documents. Structure/safety measures represent measures developed to address structural aspects of the use of healthcare technology (e.g., laboratory accreditation, personnel training, and credentialing) or quality issues related to patient safety when there are neither guidelines recommendations nor appropriate use criteria. Although the strength of evidence for appropriate use measures and structure/safety measures may not be as strong as that for formal performance measures, they are quality measures that are otherwise rigorously developed, reviewed, tested, and approved in the same manner as ACCF/AHA performance measures. The ultimate goal of the present document is to provide direction in defining and measuring the appropriate use-avoiding not only underuse but also overuse and misuse-and proper application of cardiovascular technology and to describe how such appropriate use measures and structure/safety measures might be developed for the purposes of quality improvement and public reporting. It is anticipated that this effort will help focus the national dialogue on the use of cardiovascular technology and away from the current concerns about volume and cost alone to a more holistic emphasis on value. Copyright © 2011 American College of Cardiology Foundation and the American Heart Association, Inc. Published by Elsevier Inc. All rights reserved.

32 CFR 700.1053 - Commander of a task force.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Commander of a task force. 700.1053 Section 700... Command Detail to Duty § 700.1053 Commander of a task force. (a) A geographic fleet commander, and any other naval commander, may detail in command of a task force, or other task command, any eligible...

75 FR 76422 - Meeting of the Department of Defense Task Force on the Care, Management, and Transition of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-08

... DEPARTMENT OF DEFENSE Office of the Secretary Meeting of the Department of Defense Task Force on... Forces (Subsequently Referred to as the Task Force) AGENCY: Department of Defense. ACTION: Notice... forthcoming meeting of the Department of Defense Task Force on the Care, Management, and Transition of...

75 FR 62611 - Interagency Task Force on Veterans Small Business Development

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force meeting... public meeting of the Interagency Task Force on Veterans Small Business Development. The meeting will be...

75 FR 76744 - National Disaster Housing Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

...] National Disaster Housing Task Force AGENCY: Federal Emergency Management Agency, DHS. ACTION: Notice of Meeting. SUMMARY: The National Disaster Housing Task Force (NDHTF) will meet by teleconference on December...: Mitchell Wyllins, National Disaster Housing Task Force, 500 C Street, SW., (Room 428), Washington, DC 20472...

77 FR 41472 - Interagency Task Force on Veterans Small Business Development

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force meeting... public meeting of the Interagency Task Force on Veterans Small Business Development. The meeting will be...

76 FR 8393 - Interagency Task Force on Veterans Small Business Development

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-14

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force meeting... public meeting of the Interagency Task Force on Veterans Small Business Development. The meeting will be...

75 FR 62438 - Interagency Task Force on Veterans Small Business Development Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-08

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development Meeting AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force... first public meeting of the Interagency Task Force on Veterans Small Business Development. The meeting...

Face and Construct Validity of a Novel Virtual Reality-Based Bimanual Laparoscopic Force-Skills Trainer With Haptics Feedback.

PubMed

Prasad, Raghu; Muniyandi, Manivannan; Manoharan, Govindan; Chandramohan, Servarayan M

2018-05-01

The purpose of this study was to examine the face and construct validity of a custom-developed bimanual laparoscopic force-skills trainer with haptics feedback. The study also examined the effect of handedness on fundamental and complex tasks. Residents (n = 25) and surgeons (n = 25) performed virtual reality-based bimanual fundamental and complex tasks. Tool-tissue reaction forces were summed, recorded, and analysed. Seven different force-based measures and a 1-time measure were used as metrics. Subsequently, participants filled out face validity and demographic questionnaires. Residents and surgeons were positive on the design, workspace, and usefulness of the simulator. Construct validity results showed significant differences between residents and experts during the execution of fundamental and complex tasks. In both tasks, residents applied large forces with higher coefficient of variation and force jerks (P < .001). Experts, with their dominant hand, applied lower forces in complex tasks and higher forces in fundamental tasks (P < .001). The coefficients of force variation (CoV) of residents and experts were higher in complex tasks (P < .001). Strong correlations were observed between CoV and task time for fundamental (r = 0.70) and complex tasks (r = 0.85). Range of smoothness of force was higher for the non-dominant hand in both fundamental and complex tasks. The simulator was able to differentiate the force-skills of residents and surgeons, and objectively evaluate the effects of handedness on laparoscopic force-skills. Competency-based laparoscopic skills assessment curriculum should be updated to meet the requirements of bimanual force-based training.

Dynamic Monitoring Reveals Motor Task Characteristics in Prehistoric Technical Gestures

PubMed Central

Pfleging, Johannes; Stücheli, Marius; Iovita, Radu; Buchli, Jonas

2015-01-01

Reconstructing ancient technical gestures associated with simple tool actions is crucial for understanding the co-evolution of the human forelimb and its associated control-related cognitive functions on the one hand, and of the human technological arsenal on the other hand. Although the topic of gesture is an old one in Paleolithic archaeology and in anthropology in general, very few studies have taken advantage of the new technologies from the science of kinematics in order to improve replicative experimental protocols. Recent work in paleoanthropology has shown the potential of monitored replicative experiments to reconstruct tool-use-related motions through the study of fossil bones, but so far comparatively little has been done to examine the dynamics of the tool itself. In this paper, we demonstrate that we can statistically differentiate gestures used in a simple scraping task through dynamic monitoring. Dynamics combines kinematics (position, orientation, and speed) with contact mechanical parameters (force and torque). Taken together, these parameters are important because they play a role in the formation of a visible archaeological signature, use-wear. We present our new affordable, yet precise methodology for measuring the dynamics of a simple hide-scraping task, carried out using a pull-to (PT) and a push-away (PA) gesture. A strain gage force sensor combined with a visual tag tracking system records force, torque, as well as position and orientation of hafted flint stone tools. The set-up allows switching between two tool configurations, one with distal and the other one with perpendicular hafting of the scrapers, to allow for ethnographically plausible reconstructions. The data show statistically significant differences between the two gestures: scraping away from the body (PA) generates higher shearing forces, but requires greater hand torque. Moreover, most benchmarks associated with the PA gesture are more highly variable than in the PT gesture. These results demonstrate that different gestures used in ‘common’ prehistoric tasks can be distinguished quantitatively based on their dynamic parameters. Future research needs to assess our ability to reconstruct these parameters from observed use-wear patterns. PMID:26284785

Cognitive Engineering of Advanced Information Technology for Air Force Systems Design and Deployment: Prototype for Air Defense Intelligence and Operations

DTIC Science & Technology

1989-10-01

train members of the eventual decision-making group to have different strategies, called " policies ," for making inferences and/or decisions. For example...group task, the task side of the lens model is structured so that each person must modify his judgment policy by learning from the other person in order...judgment policy ; that is, they would receive in both pictorial and textual form a description of how each person combines information to make a judgment

Childhood Obesity Task Forces Established by State Legislatures, 2001-2010

PubMed Central

Kim, Sonia A.; Sherry, Bettylou; Blanck, Heidi M.

2013-01-01

Introduction States and communities are considering policy and environmental strategies, including enacting legislation, to reduce and prevent childhood obesity. One legislative approach has been to create task forces to understand key issues and develop a course of action. The goal of this study was to describe state-level, childhood obesity task forces in the United States created by legislation from 2001 through 2010. Methods We used the Center for Disease Control and Prevention’s Division of Nutrition, Physical Activity, and Obesity database to identify state-level childhood obesity task forces created through legislation from 2001 through 2010. Results We identified 21 states that had enacted legislation creating childhood obesity task forces of which 6 had created more than one task force. Most task forces were charged with both gathering and reviewing information and making recommendations for obesity-prevention actions in the state. Most legislation required that task forces include representation from the state legislature, state agencies, community organizations, and community members. Conclusion Evaluation of the effectiveness of obesity-prevention task forces and the primary components that contribute to their success may help to determine the advantages of the use of such strategies in obesity prevention. PMID:23987250

Task Force 1. Report of the Task Force on Patient Expectations, Core Values, Reintegration, and the New Model of Family Medicine

PubMed Central

Green, Larry A.; Graham, Robert; Bagley, Bruce; Kilo, Charles M.; Spann, Stephen J.; Bogdewic, Stephen P.; Swanson, John

2004-01-01

BACKGROUND To lay the groundwork for the development of a comprehensive strategy to transform and renew the specialty of family medicine, this Future of Family Medicine task force was charged with identifying the core values of family medicine, developing proposals to reform family medicine to meet consumer expectations, and determining systems of care to be delivered by family medicine in the future. METHODS A diverse, multidisciplinary task force representing a broad spectrum of perspectives and expertise analyzed and discussed published literature; findings from surveys, interviews, and focus groups compiled by research firms contracted to the Future of Family Medicine project; and analyses from The Robert Graham Center, professional societies in the United States and abroad, and others. Through meetings, conference calls, and writing, and revision of a series of subcommittee reports, the entire task force reached consensus on its conclusions and recommendations. These were reviewed by an external panel of experts and revisions were made accordingly. MAJOR FINDINGS After delivering on its promise to reverse the decline of general practice in the United States, family medicine and the nation face additional challenges to assure all people receive care that is safe, effective, patient-centered, timely, efficient, and equitable. Challenges the discipline needs to address to improve family physicians’ ability to make important further contributions include developing a broader, more accurate understanding of the specialty among the public and other health professionals, addressing the wide scope and variance in practice types within family medicine, winning respect for the specialty in academic circles, making family medicine a more attractive career option, and dealing with the perception that family medicine is not solidly grounded in science and technology. The task force set forth a proposed identity statement for family medicine, a basket of services that should be reliably provided in family medicine practices, and an itemization of key attributes and core values that define the specialty. It also proposed and described a New Model of family medicine for people of all ages and both genders that emphasizes patient-centered, evidence-based, whole-person care provided through a multidisciplinary team approach in settings that reduce barriers to access and use advanced information systems and other new technologies. The task force recommended a time of active experimentation to redesign the work and workplace of family physicians; the development of revised financial models for family medicine, and a national resource to provide assistance to individual practices moving to New Model practice; and cooperation with others pursuing the transformation of frontline medicine to better serve the public. CONCLUSIONS Unless there are changes in the broader health care system and within the specialty, the position of family medicine in the United States will be untenable in a 10- to 20-year time frame. Even within the constraints of today’s flawed health care system, there are major opportunities for family physicians to realize improved results for patients and economic success. A period of aggressive experimentation and redevelopment of family medicine is needed now. The future success of the discipline and its impact on public well-being depends in large measure on family medicine’s ability to rearticulate its vision and competencies in a fashion that has greater resonance with the public while substantially revising the organization and processes by which care is delivered. When accomplished, family physicians will achieve more fully the aspirations articulated by the specialty’s core values and contribute to the solution of the nation’s serious health care problems.

2015 International PV Quality Assurance Task Force (PVQAT) Workshop |

Science.gov Websites

Photovoltaic Research | NREL International PV Quality Assurance Task Force (PVQAT) Workshop 2015 International PV Quality Assurance Task Force (PVQAT) Workshop Wednesday, February 25, 2015 Chairs : Tony Sample and Masaaki Yamamichi The 2015 International PV Quality Assurance Task Force (PVQAT

78 FR 27969 - Meeting of the Community Preventive Services Task Force (Task Force)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... discussed: Matters to be discussed: cancer prevention and control, cardiovascular disease prevention and... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention...

77 FR 56845 - Meeting of the Community Preventive Services Task Force (Task Force)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-14

...: Matters to be discussed: Tobacco, oral health and cardiovascular disease. Meeting Accessibility: This... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention...

78 FR 59939 - Meeting of the Community Preventive Services Task Force (Task Force)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

.... Matters to be discussed: Cancer prevention and control, cardiovascular disease prevention and control... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention...

78 FR 7849 - Interagency Task Force on Veterans Small Business Development

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-04

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force Meeting... meeting of the Interagency Task Force on Veterans Small Business Development. The meeting will be open to...

76 FR 54258 - Request for Comments-Fiscal Oversight Task Force Report and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

... LEGAL SERVICES CORPORATION Request for Comments--Fiscal Oversight Task Force Report and... Fiscal Oversight Task Force, which reviewed and made recommendations regarding how LSC conducts fiscal... territories. By Resolution adopted on July 21, 2010, the Board established the Fiscal Oversight Task Force...

78 FR 70087 - Interagency Task Force on Veterans Small Business Development

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force meeting... meeting of the Interagency Task Force on Veterans Small Business Development. The meeting will be open to...

78 FR 45996 - Interagency Task Force on Veterans Small Business Development

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-30

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force meeting... meeting of the Interagency Task Force on Veterans Small Business Development. The meeting will be open to...

78 FR 21492 - Interagency Task Force on Veterans Small Business Development

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-10

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency Task Force Meeting... meeting of the Interagency Task Force on Veterans Small Business Development. The meeting will be open to...

The case for reassessment of health care technology. Once is not enough.

PubMed

Banta, H D; Thacker, S B

1990-07-11

Assessment of health care technologies should be an iterative process, not a single event. In the United States there are an increasing number of organized attempts at reassessment of technologies by the health industry, professional societies, and national government agencies, such as the Medical Necessity Project of Blue Cross/Blue Shield, the Clinical Efficacy Assessment Project of the American College of Physicians, and the work of the US Preventive Services Task Force. We examine four clinical practices--electronic fetal monitoring, episiotomy, electroencephalography, and hysterectomy--to illustrate the need to continuously reassess existing technologies and to challenge our current inertia in this critical arena of health practice.

Community hoarding task forces: a comparative case study of five task forces in the United States.

PubMed

Bratiotis, Christiana

2013-05-01

During the past decade, many community task forces have formed to address hoarding problems that come to public attention. Such task forces provide a societal-level intervention to assist people with the most severe cases of hoarding, who do not voluntarily seek or want help for their hoarding behaviour. This qualitative study of five U.S. hoarding task forces included sites selected for their diversity of purpose, approaches to hoarding intervention and community geography, composition and resources. Data were collected during the period of September 2007-March 2008. The case study methodology used multiple forms of data, including semi-structured interviews, analysis of documents, small group interviews and investigator observation. This study captured the perspectives of public and private sector service providers such as mental health, housing, social service, public health agencies and community enforcement organisations (fire, police, legal, animal control) to examine how task forces organise and operate and the emerging practice and policy changes. Study findings suggest that structural factors (e.g. leadership, purpose, funding and membership) impact hoarding task force viability, that participation on a task force influences practice and policy decisions about hoarding, and that social work can expand its role in task force leadership. Task forces may be a mechanism for improving community policies about hoarding and mechanisms for addressing other social problems across multiple sectors. © 2012 Blackwell Publishing Ltd.

Manufacturing Technology Support (MATES) II Task Order 0006: Air Force Technology and Industrial Base Research and Analysis. Subtask Order 0004: Study on Supply Chains and Social Media

DTIC Science & Technology

2013-10-01

information goldmine for early warning signals of consumer discontent and marketing opportunity. Toyota, Nike , Tyco and Shell are just a few of the many...are using ESN platforms internally to gain efficiencies. While there were very few examples where these solutions are being used in manufacturing...Schaefer of Schaefer Marketing Solutions. Mr. Peters has done extensive work in manufacturing supply chains, with an emphasis on their assembly and

White Paper of the Society of Computed Body Tomography and Magnetic Resonance on Dual-Energy CT, Part 1: Technology and Terminology.

PubMed

Siegel, Marilyn J; Kaza, Ravi K; Bolus, David N; Boll, Daniel T; Rofsky, Neil M; De Cecco, Carlo N; Foley, W Dennis; Morgan, Desiree E; Schoepf, U Joseph; Sahani, Dushyant V; Shuman, William P; Vrtiska, Terri J; Yeh, Benjamin M; Berland, Lincoln L

This is the first of a series of 4 white papers that represent Expert Consensus Documents developed by the Society of Computed Body Tomography and Magnetic Resonance through its task force on dual-energy computed tomography (DECT). This article, part 1, describes the fundamentals of the physical basis for DECT and the technology of DECT and proposes uniform nomenclature to account for differences in proprietary terms among manufacturers.

Space station operations task force. Panel 2 report: Ground operations and support systems

NASA Technical Reports Server (NTRS)

1987-01-01

The Ground Operations Concept embodied in this report provides for safe multi-user utilization of the Space Station, eases user integration, and gives users autonomy and flexibility. It provides for meaningful multi-national participation while protecting U.S. interests. The concept also supports continued space operations technology development by maintaining NASA expertise and enabling technology evolution. Given attention here are pre/post flight operations, logistics, sustaining engineering/configuration management, transportation services/rescue, and information systems and communication.

Manufacturing Technology Support (MATES). Task Order 0021: Air Force Technology and Industrial Base Research and Analysis, Subtask Order 06: Direct Digital Manufacturing

DTIC Science & Technology

2011-08-01

industries and key players providing equipment include Flow and OMAX. The decision tree for waterjet machining is shown in Figure 28. Figure 28...about the melt pool. Process parameters including powder flow , laser power, and scan speed are adjusted accordingly • Multiple materials o BD...project.eu.com/home/home_page_static.jsp o Working with multiple partners; one is Cochlear . Using LMD or SLM to fabricate cochlear implants with 10

Report of the Defense Science Board Task Force on University Responsiveness to National Security Requirements.

DTIC Science & Technology

1982-01-01

R.ugustine Chairman iv OFFICE OF THE SECRETARY OF DEFENSE WASHINGTON, D.C. 20301 27 January 1982 DEFENSE SCIENCIE BOARD Mr. Norman R. Augustine Chai rman...Institute of Technology Dr. Norman Hackerman President Rice University Dr. Richard L. Haley Assistant Deputy Science and Technology USA Material ...Biological and Medical Sciences 51.8 67.8 22% Materials 53.2 65.1 13% Chemistry 47.8 60.1 17% Math and Computer Sciences 44.2 53.6 12% Oceanography 43.2

Tailored Systems Architecture for Design of Space Science and Technology Missions Using DoDAF V2.0

DTIC Science & Technology

2009-12-01

GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...ADDRESS(ES) Air Force Institute of Technology,2950 Hobson Way,WPAFB,OH,45433-7765 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING...the focus on rapid development and transition, if a system architecture framework could be developed and used to increase visibility within the

Tailored Systems Architecture for Design of Space Science and Technology Missions using DoDAF V2.0

DTIC Science & Technology

2009-12-01

GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...ADDRESS(ES) Air Force Institute of Technology,2950 Hobson Way,WPAFB,OH,45433-7765 8. PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING...the focus on rapid development and transition, if a system architecture framework could be developed and used to increase visibility within the

75 FR 32186 - Task Force on Community Preventive Services

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-07

... by space available. Purpose: The mission of the Task Force is to develop and publish the Guide to... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Task Force on Community Preventive Services Name: Task Force on Community Preventive Services meeting. Times and Dates: 8...

78 FR 2996 - Meeting of the Community Preventive Services Task Force (Task Force)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the Community Preventive Services Task Force (Task Force) AGENCY: Centers for Disease Control and Prevention... for Disease Control and Prevention (CDC) announces the next meeting of the Community Preventive...

77 FR 16256 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-20

...] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: This notice announces a meeting of the Aquatic Nuisance Species (ANS) Task Force. The ANS Task Force's purpose is to develop and implement a program for U.S. waters to prevent introduction...

75 FR 57987 - Evaluation of the Groundwater Task Force Report: Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-23

... NUCLEAR REGULATORY COMMISSION [NRC-2010-0302] Evaluation of the Groundwater Task Force Report... Task Force (GTF) in March 2010 to determine whether past, current, and planned actions should be... recommendations made in the Liquid Radioactive Release Lessons Learned Task Force Final Report dated September 1...

75 FR 70764 - Small Business Information Security Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-18

... SMALL BUSINESS ADMINISTRATION Small Business Information Security Task Force AGENCY: U.S. Small... publish meeting minutes for the Small Business Information Security Task Force Meeting. DATES: 1 p.m... Task Force. Chairman, Rusty Pickens, called the meeting to order on October 13, 2010 at 1 p.m. Roll...

7 CFR 1900.6 - Chair, Loan Resolution Task Force.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Chair, Loan Resolution Task Force. 1900.6 Section... AGRICULTURE PROGRAM REGULATIONS GENERAL Delegations of Authority § 1900.6 Chair, Loan Resolution Task Force. The Chair, Loan Resolution Task Force is delegated the following authorities, to be exercised until...

76 FR 5232 - Small Business Information Security Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-28

... SMALL BUSINESS ADMINISTRATION Small Business Information Security Task Force AGENCY: U.S. Small... publish meeting minutes for the Small Business Information Security Task Force Meeting. DATES: 1 p.m... Task Force. Chairman, Rusty Pickens, called the meeting to order on December 8, 2010 at 1 p.m. Roll...

76 FR 11307 - Small Business Information Security Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-01

... SMALL BUSINESS ADMINISTRATION Small Business Information Security Task Force AGENCY: U.S. Small... publish meeting minutes for the Small Business Information Security Task Force Meeting. DATES: 1 p.m... Task Force. Chairman, Mr. Rusty Pickens, called the meeting to order on January 12, 2011 at 1 p.m. Roll...

Gulf Coast Ecosystem Restoration Task Force Meeting and Public Listening

Science.gov Websites

Data Media & News Publications Press Releases Story Archive Home Gulf Coast Ecosystem Restoration Task Force Meeting and Public Listening Session Gulf Coast Ecosystem Restoration Task Force Meeting and Title: Gulf Coast Ecosystem Restoration Task Force Meeting and Public Listening SessionDescription: The

Task Force II: Energy and Its Socioeconomic Impacts

ERIC Educational Resources Information Center

Appalachia, 1977

1977-01-01

Summarizing the Task Force Issues Paper presented at the Appalachian Conference on Balanced Growth and Economic Development (1977), this article presents selected comments by Task Force participants, and Task Force recommendations re: a national severence tax on extraction of nonrenewable energy resources; socioeconomic costs of nuclear energy; a…

Environmental management strategy: four forces analysis.

PubMed

Doyle, Martin W; Von Windheim, Jesko

2015-01-01

We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

Environmental Management Strategy: Four Forces Analysis

NASA Astrophysics Data System (ADS)

Doyle, Martin W.; Von Windheim, Jesko

2015-01-01

We develop an analytical approach for more systematically analyzing environmental management problems in order to develop strategic plans. This approach can be deployed by agencies, non-profit organizations, corporations, or other organizations and institutions tasked with improving environmental quality. The analysis relies on assessing the underlying natural processes followed by articulation of the relevant societal forces causing environmental change: (1) science and technology, (2) governance, (3) markets and the economy, and (4) public behavior. The four forces analysis is then used to strategize which types of actions might be most effective at influencing environmental quality. Such strategy has been under-used and under-valued in environmental management outside of the corporate sector, and we suggest that this four forces analysis is a useful analytic to begin developing such strategy.

Remote battlefield observer technology (REBOT)

NASA Astrophysics Data System (ADS)

Lanzagorta, Marco O.; Uhlmann, Jeffrey K.; Julier, Simon J.; Kuo, Eddy

1999-07-01

Battlefield situation awareness is the most fundamental prerequisite for effective command and control. Information about the state of the battlefield must be both timely and accurate. Imagery data is of particular importance because it can be directly used to monitor the deployment of enemy forces in a given area of interest, the traversability of the terrain in that area, as well as many other variables that are critical for tactical and force level planning. In this paper we describe prototype REmote Battlefield Observer Technology (REBOT) that can be deployed at specified locations and subsequently tasked to transmit high resolution panoramic imagery of its surrounding area. Although first generation REBOTs will be stationary platforms, the next generation will be autonomous ground vehicles capable of transporting themselves to specified locations. We argue that REBOT fills a critical gap in present situation awareness technologies. We expect to provide results of REBOT tests to be conducted at the 1999 Marines Advanced Warfighting Demonstration.

Unintentional force changes in cyclical tasks performed by an abundant system: Empirical observations and a dynamical model.

PubMed

Reschechtko, Sasha; Hasanbarani, Fariba; Akulin, Vladimir M; Latash, Mark L

2017-05-14

The study explored unintentional force changes elicited by removing visual feedback during cyclical, two-finger isometric force production tasks. Subjects performed two types of tasks at 1Hz, paced by an auditory metronome. One - Force task - required cyclical changes in total force while maintaining the sharing, defined as relative contribution of a finger to total force. The other task - Share task - required cyclical changes in sharing while keeping total force unchanged. Each trial started under full visual feedback on both force and sharing; subsequently, feedback on the variable that was instructed to stay constant was frozen, and finally feedback on the other variable was also removed. In both tasks, turning off visual feedback on total force elicited a drop in the mid-point of the force cycle and an increase in the peak-to-peak force amplitude. Turning off visual feedback on sharing led to a drift of mean share toward 50:50 across both tasks. Without visual feedback there was consistent deviation of the two force time series from the in-phase pattern (typical of the Force task) and from the out-of-phase pattern (typical of the Share task). This finding is in contrast to most earlier studies that demonstrated only two stable patterns, in-phase and out-of-phase. We interpret the results as consequences of drifts of parameters in a dynamical system leading in particular to drifts in the referent finger coordinates toward their actual coordinates. The relative phase desynchronization is caused by the right-left differences in the hypothesized drift processes, consistent with the dynamic dominance hypothesis. Copyright © 2017 IBRO. Published by Elsevier Ltd. All rights reserved.

Unintentional force changes in cyclical tasks performed by an abundant system: Empirical observations and a dynamical model

PubMed Central

Reschechtko, Sasha; Hasanbarani, Fariba; Akulin, Vladimir M.; Latash, Mark L.

2017-01-01

The study explored unintentional force changes elicited by removing visual feedback during cyclical, two-finger isometric force production tasks. Subjects performed two types of tasks at 1 Hz, paced by an auditory metronome. One – Force task – required cyclical changes in total force while maintaining the sharing, defined as relative contribution of a finger to total force. The other task – Share task – required cyclical changes in sharing while keeping total force unchanged. Each trial started under full visual feedback on both force and sharing; subsequently, feedback on the variable that was instructed to stay constant was frozen, and finally feedback on the other variable was also removed. In both tasks, turning off visual feedback on total force elicited a drop in the mid-point of the force cycle and an increase in the peak-to-peak force amplitude. Turning off visual feedback on sharing led to a drift of mean share toward 50:50 across both tasks. Without visual feedback there was consistent deviation of the two force time series from the in-phase pattern (typical of the Force task) and from the out-of-phase pattern (typical of the Share task). This finding is in contrast to most earlier studies that demonstrated only two stable patterns, in-phase and out-of-phase. We interpret the results as consequences of drifts of parameters in a dynamical system leading in particular to drifts in the referent finger coordinates toward their actual coordinates. The relative phase desynchronization is caused by the right-left differences in the hypothesized drift processes, consistent with the dynamic dominance hypothesis. PMID:28344070

77 FR 43064 - Defense Science Board; Notice of Advisory Committee Meetings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

... Science Board 2012 Summer Study on Technology and Innovation Enablers for Superiority in 2030 will meet in closed session August 20-24, 2012, from 8:00 a.m. to 5:00 p.m. at the Charles Stark Draper Laboratory... meeting, the Board will discuss interim finding and recommendations resulting from ongoing Task Force...

The Situational Leadership Approach Effects on Employee Motivation in Multi-Generational Information Technology Organizations

ERIC Educational Resources Information Center

Irby, Thaddaeus

2011-01-01

This study examines the three generations comprising today's IT organizations to determine whether the Situational Leadership approach is effective in motivating this diverse work force to perform project-related tasks. Baby Boomer employees, Generation X employees, and Generation Y employees are the three generations actively employed in IT…

Development of Articulated Competency-Based Curriculum in Automated Systems/Robotics Technology. Final Report.

ERIC Educational Resources Information Center

Luzerne County Community Coll., Nanticoke, PA.

A project was conducted at the Community College of Luzerne County (Pennsylvania) to develop, in cooperation with area vocational-technical schools, the first year of a competency-based curriculum in automated systems/robotics. Existing programs were reviewed by the task force and a list of sample competencies was developed and sent to area…

THE USE OF CHEMICALS AS INSECTICIDES--PLANTS. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 2.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

THIS GUIDE IS ONE OF A SERIES DESIGNED TO PROVIDE GROUP INSTRUCTION AND INDIVIDUAL OCCUPATIONAL EXPERIENCE FOR POST-SECONDARY STUDENTS PREPARING FOR EMPLOYMENT AS AGRICULTURAL CHEMICAL TECHNICIANS. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF STATE STUDY DATA. THE OBJECTIVES ARE TO DEVELOP (1) INTEREST, APPRECIATION, AND UNDERSTANDING…

Design and Acquisition of Software for Defense Systems

DTIC Science & Technology

2018-02-14

enterprise business systems and related information technology (IT) services, the role software plays in enabling and enhancing weapons systems often...3 The information in this chart was compiled from Christian Hagen, Jeff Sorenson, Steven Hurt...understanding to make an informed choice of final architecture. The Task Force found commercial practice starts with several competing architectures and

THE USE OF CHEMICALS AS HERBICIDES. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 6.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF STATE STUDIES, THIS MODULE IS ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR ENTRY AND ADVANCEMENT IN AGRICULTURAL CHEMICAL OCCUPATIONS. THE SPECIFIC OBJECTIVES OF THIS MODULE ARE TO DEVELOP ABILITIES NECESSARY FOR OCCUPATIONS CONCERNED WITH CHEMICAL WEED…

THE USE OF CHEMICALS AS FERTILIZERS. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 1.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

THE PURPOSE OF THIS GUIDE IS TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS. ONE OF A SERIES OF EIGHT MODULES, IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES. SUBJECT MATTER AREAS ARE (1) CHEMICAL NUTRITION OF PLANTS, (2) PLANT GROWTH, (3) TERMINOLOGY,…

Utilizing Innovative Video Chat Technology to Meet National Standards: A Case Study on a STARTALK Hindi Language Program

ERIC Educational Resources Information Center

Parveen, Shaheen; Pater, Cayley

2012-01-01

Responding to the need for foreign language fluency in ever-globalizing business and cultural spheres, the federal government and foreign language institutions in an eleven-member task force collaboratively published a set of nationally recognized, foundational standards for foreign language teaching. Rather than rely on teacher-centered…

Skills Issues in Other Business Services: Professional Services. Skills Task Force Research Paper 16.

ERIC Educational Resources Information Center

Penn, Roger; Holt, Richard

"Creative business services" have grown rapidly in Great Britain and are important in terms of their impact on the economy, including their contribution to international trade. They have helped and been boosted by such business changes as privatization, spread of information technology (IT), and contracting out of services. The sectors…

Using Technology-Enabled Active Learning Tools to Introduce Business Ethics Topics in Business Law Courses: A Few Practical Examples

ERIC Educational Resources Information Center

Reid, Linda A.; Weber, Curt M.

2008-01-01

In this article, the authors echo the assertion of the Association to Advance Collegiate Schools of Business (AACSB) Ethics Education Task Force that business schools must encourage students to develop a deep understanding of the myriad challenges surrounding corporate responsibility and corporate governance; provide them with tools for…

THE USE OF CHEMICALS AS PLANT REGULATORS. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 8.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS, THIS MODULE IS SPECIFICALLY CONCERNED WITH CHEMICALS AS PLANT REGULATORS. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES. SECTIONS INCLUDE -- (1) CHEMICALS AS MODIFIERS OF PLANT GROWTH, (2)…

University Research and Economic Development in Arizona Today: A Working Paper.

ERIC Educational Resources Information Center

Fisher, Marvin

One of the working papers in the final report of the Arizona Board of Regents' Task Force on Excellence, Efficiency and Competitiveness, this study focuses on Arizona's university research and economic development. There is concern that America is losing its competitive edge in the crucial areas of science and technology as fewer students study…

Changing America: The New Face of Science and Engineering. Final Report.

ERIC Educational Resources Information Center

Task Force on Women, Minorities, and the Handicapped in Science and Technology, Washington, DC.

The Task Force on Women, Minorities, and the Handicapped in Science and Technology was established by the U.S. Congress in Public Law 99-383 with the purpose of developing a long-range plan for broadening participation in science and engineering. Public hearings were held in Albuquerque (New Mexico), Atlanta (Georgia), Baltimore (Maryland), Boston…

PEO Integration Acronym Book

DTIC Science & Technology

2011-02-01

Command CASE Computer Aided Software Engineering CASEVAC Casualty Evacuation CASTFOREM Combined Arms And Support Task Force Evaluation Model CAT Center For...Advanced Technologies CAT Civil Affairs Team CAT Combined Arms Training CAT Crew Integration CAT Crisis Action Team CATIA Computer-Aided Three...Dimensional Interactive Application CATOX Catalytic Oxidation CATS Combined Arms Training Strategy CATT Combined Arms Tactical Trainer CATT Computer

VENI, video, VICI: The merging of computer and video technologies

NASA Technical Reports Server (NTRS)

Horowitz, Jay G.

1993-01-01

The topics covered include the following: High Definition Television (HDTV) milestones; visual information bandwidth; television frequency allocation and bandwidth; horizontal scanning; workstation RGB color domain; NTSC color domain; American HDTV time-table; HDTV image size; digital HDTV hierarchy; task force on digital image architecture; open architecture model; future displays; and the ULTIMATE imaging system.

Southern African Office of Astronomy for Development: A New Hub for Astronomy for Development

NASA Astrophysics Data System (ADS)

Mutondo, Moola S.; Simpemba, Prospery

2016-10-01

A new Astronomy for Development hub needs innovative tools and programs. SAROAD is developing exciting tools integrating Raspberry Pi technology to bring cost-effective astronomy content to learning centres. SAROAD would also like to report achievements in realizing the IAU's strategic plan. In order to manage, evaluate and coordinate regional IAU (International Astronomical Union) capacity building programmes, including the recruitment and mobilization of volunteers, SAROAD has built an intranet that is accessible to regional members upon request. Using this resource, regional members can see and participate in regional activities. SAROAD has commenced with projects in the three Task Force areas of Universities and Research, Children and Schools and Public Outreach. Under the three Task Force areas, a total of seven projects have commenced in Zambia (some supported by funds from IAU Annual Call for proposals).

77 FR 4584 - Sunshine Act Meetings; National Science Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... of a National Academy of Sciences/National Research Council study CPP Task Force on Unsolicited Mid... and December 13 meeting minutes Discussion of the MS Task Force draft report CSB Task Force on Data... Task Force Closing Remarks From the Chairman Committee on Audit and Oversight (A&O) Open Session: 4-4...

Academic Standards Task Force Report.

ERIC Educational Resources Information Center

Burnham, Peter F.

The product of a year-long research process undertaken by a Task Force on Academic Standards at Tompkins Cortland Community College (TCCC) in 1980-81, this report provides background to the deliberations of the Task Force and a presentation of their position on academic standards at TCCC. The report establishes the Task Force's commitments to…

75 FR 61175 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

...] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: This notice announces a meeting of the Aquatic Nuisance Species (ANS) Task Force. The.... DATES: The ANS Task Force will meet from 8 a.m. to 5 p.m. on Wednesday, November 3 through Thursday...

18 CFR 701.58 - Task forces.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Task forces. 701.58... Headquarters Organization § 701.58 Task forces. The Director with Council concurrence or the Council may establish task forces from time to time to aid in the preparation of issues for presentation to the Council...

3 CFR - White House Task Force on Middle-Class Working Families

Code of Federal Regulations, 2010 CFR

2010-01-01

... 3 The President 1 2010-01-01 2010-01-01 false White House Task Force on Middle-Class Working... Task Force on Middle-Class Working Families Memorandum for the Heads of Executive Departments and... times. To these ends, I hereby direct the following: Section 1. White House Task Force on Middle-Class...

77 FR 441 - Measurement and Control of Combustible Gas Generation and Dispersal

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-05

... Task Force Review of Insights from the Fukushima Dai-ichi Accident'' (Fukushima Task Force Report... Fukushima Task Force Report: ``[t]he task force recommends, as part of the longer term review, that the NRC... additional information is revealed through further study of the Fukushima Dai-ichi accident.'' The Commission...

76 FR 58165 - Petitions for Rulemaking Submitted by the Natural Resources Defense Council, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

...-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident'' (Fukushima Task Force Report... the Fukushima Task Force Report for the purpose of providing the Commission with fully-informed... recommendations from the Fukushima Task Force Report, and is not providing a separate opportunity for public...

76 FR 76189 - Notice of Public Hearing-Fiscal Oversight Task Force Report & Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-06

... period; and (3) reactions to those comments submitted by Task Force members. DATES: Monday, December 12... Report, the public comments previously submitted, and reactions to those comments from several Task Force members. The public comments and a summary of Task Force members' reactions may be viewed online at http...

Solar Energy Task Force Report: Technical Training Guidelines.

ERIC Educational Resources Information Center

O'Connor, Kevin

This task force report offers guidelines and information for the development of vocational education programs oriented to the commercial application of solar energy in water and space heating. After Section I introduces the Solar Energy Task Force and its activities, Section II outlines the task force's objectives and raises several issues and…

The effect of bracing availability on one-hand isometric force exertion capability.

PubMed

Jones, Monica L H; Reed, Matthew P; Chaffin, Don B

2013-01-01

Environmental obstructions that workers encounter can kinematically limit the postures that they can achieve. However, such obstructions can also provide an opportunity for additional support by bracing with the hand, thigh or other body part. The reaction forces on bracing surfaces, which are in addition to those acting at the feet and task hand, are hypothesised to improve force exertion capability, and become required inputs to biomechanical analysis of tasks with bracing. The effects of kinematic constraints and associated bracing opportunities on isometric hand force were quantified in a laboratory study of 22 men and women. Analyses of one-hand maximal push, pull and lift tasks demonstrated that bracing surfaces available at the thighs and non-task hand enabled participants to exert an average of 43% more force at the task hand. Task hand force direction deviated significantly from the nominal direction for exertions performed with bracing at both medium and low task hand locations. This study quantifies the effect of bracing on kinematically constrained force exertions. Knowledge that appropriate bracing surfaces can substantially increase hand force is critical to the evaluation of task-oriented strength capability. Force estimates may also involve large off-axis components, which have clear implications for ergonomic analyses of manual tasks.

Performance drifts in two-finger cyclical force production tasks performed by one and two actors.

PubMed

Hasanbarani, Fariba; Reschechtko, Sasha; Latash, Mark L

2018-03-01

We explored changes in the cyclical two-finger force performance task caused by turning visual feedback off performed either by the index and middle fingers of the dominant hand or by two index fingers of two persons. Based on an earlier study, we expected drifts in finger force amplitude and midpoint without a drift in relative phase. The subjects performed two rhythmical tasks at 1 Hz while paced by an auditory metronome. One of the tasks required cyclical changes in total force magnitude without changes in the sharing of the force between the two fingers. The other task required cyclical changes in the force sharing without changing total force magnitude. Subjects were provided with visual feedback, which showed total force magnitude and force sharing via cursor motion along the vertical and horizontal axes, respectively. Further, visual feedback was turned off, first on the variable that was not required to change and then on both variables. Turning visual feedback off led to a mean force drift toward lower magnitudes while force amplitude increased. There was a consistent drift in the relative phase in the one-hand task with the index finger leading the middle finger. No consistent relative phase drift was seen in the two-person tasks. The shape of the force cycle changed without visual feedback reflected in the lower similarity to a perfect cosine shape and in the higher time spent at lower force magnitudes. The data confirm findings of earlier studies regarding force amplitude and midpoint changes, but falsify predictions of an earlier proposed model with respect to the relative phase changes. We discuss factors that could contribute to the observed relative phase drift in the one-hand tasks including the leader-follower pattern generalized for two-effector tasks performed by one person.

76 FR 52318 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration U.S. Coral Reef Task Force... of the U.S. Coral Reef Task Force. The meeting will be held in Ft. Lauderdale, Florida. This meeting, the 26th bi-annual meeting of the U.S. Coral Reef Task Force, provides a forum for coordinated...

76 FR 7579 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-10

.... Coral Reef Task Force Public Meeting and Public Comment AGENCY: Fish and Wildlife Service, Interior... Service (Service), announce a public business meeting of the U.S. Coral Reef Task Force (USCRTF) [email protected] ); or Liza Johnson, U.S. Coral Reef Task Force Department of the Interior Liaison, U.S...

76 FR 15334 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-21

...] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: This notice announces a meeting of the Aquatic Nuisance Species (ANS) Task Force. The.... DATES: The ANS Task Force will meet from 8 a.m. to 5 p.m. on Wednesday, May 4; and Thursday May 5; and...

Force Control Characteristics for Generation and Relaxation in the Lower Limb.

PubMed

Ohtaka, Chiaki; Fujiwara, Motoko

2018-05-29

We investigated the characteristics for force generation and relaxation using graded isometric contractions of the knee extensors. Participants performed the following tasks as quickly and accurately as possible. For the force generation task, force was increased from 0% to 20%, 40% and 60% of the maximal voluntary force (MVF). For the force relaxation task, force was decreased from 60% to 40%, 20% and 0%. The following parameters of the recorded force were calculated: error, time, and rate of force development. The error was consistently greater for force relaxation than generation. Reaction and adjustment times were independent of the tasks. The control strategy was markedly different for force relaxation and generation, this tendency was particularly evident for the lower limb compared to the upper limb.

Consolidated fuel reprossing program: The implications of force reflection for teleoperation in space

NASA Technical Reports Server (NTRS)

Draper, John V.; Herndon, Joseph N.; Moore, Wendy E.

1987-01-01

Previous research on teleoperator force feedback is reviewed and results of a testing program which assessed the impact of force reflection on teleoperator task performance are reported. Force relection is a type of force feedback in which the forces acting on the remote portion of the teleoperator are displayed to the operator by back-driving the master controller. The testing program compared three force reflection levels: 4 to 1 (four units of force on the slave produce one unit of force at the master controller), 1 to 1, and infinity to 1 (no force reflection). Time required to complete tasks, rate of occurrence of errors, the maximum force applied to tasks components, and variability in forces applied to components during completion of representative remote handling tasks were used as dependent variables. Operators exhibited lower error rates, lower peak forces, and more consistent application of forces using force relection than they did without it. These data support the hypothesis that force reflection provides useful information for teleoperator users. The earlier literature and the results of the experiment are discussed in terms of their implications for space based teleoperator systems. The discussion described the impact of force reflection on task completion performance and task strategies, as suggested by the literature. It is important to understand the trade-offs involved in using telerobotic systems with and without force reflection.

Motor intensive anti-gravity training improves performance in dynamic balance related tasks in persons with Parkinson's disease.

PubMed

Malling, Anne Sofie B; Jensen, Bente R

2016-01-01

Recent studies indicate that the effect of training on motor performance in persons with Parkinson's disease (PDP) is dependent on motor intensity. However, training of high motor intensity can be hard to apply in PDP due to e.g. bradykinesia, rigidity, tremor and postural instability. Therefore, the aim was to study the effect of motor intensive training performed in a safe anti-gravity environment using lower-body positive pressure (LBPP) technology on performance during dynamic balance related tasks. Thirteen male PDP went through an 8-week control period followed by 8 weeks of motor intensive antigravity training. Seventeen healthy males constituted a control group (CON). Performance during a five repetition sit-to-stand test (STS; sagittal plane) and a dynamic postural balance test (DPB; transversal plane) was evaluated. Effect measures were completion time, functional rates of force development, directional changes and force variance. STS completion time improved by 24% to the level of CON which was explained by shorter sitting-time and standing-time and larger numeric rate of force change during lowering to the chair, indicating faster vertical directional change and improved relaxation. DPB completion time tended to improve and was accompanied by improvements of functional medial and lateral rates of force development and higher vertical force variance during DPB. Our results suggest that the performance improvements may relate to improved inter-limb coordination. It is concluded that 8 weeks of motor intensive training in a safe LBPP environment improved performance during dynamic balance related tasks in PDP. Copyright © 2015 Elsevier B.V. All rights reserved.

OECD-NEA Expert Group on Multi-Physics Experimental Data, Benchmarks and Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valentine, Timothy; Rohatgi, Upendra S.

High-fidelity, multi-physics modeling and simulation (M&S) tools are being developed and utilized for a variety of applications in nuclear science and technology and show great promise in their abilities to reproduce observed phenomena for many applications. Even with the increasing fidelity and sophistication of coupled multi-physics M&S tools, the underpinning models and data still need to be validated against experiments that may require a more complex array of validation data because of the great breadth of the time, energy and spatial domains of the physical phenomena that are being simulated. The Expert Group on Multi-Physics Experimental Data, Benchmarks and Validationmore » (MPEBV) of the Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD) was formed to address the challenges with the validation of such tools. The work of the MPEBV expert group is shared among three task forces to fulfill its mandate and specific exercises are being developed to demonstrate validation principles for common industrial challenges. This paper describes the overall mission of the group, the specific objectives of the task forces, the linkages among the task forces, and the development of a validation exercise that focuses on a specific reactor challenge problem.« less

Multiple Criteria Decision Analysis for Health Care Decision Making--An Introduction: Report 1 of the ISPOR MCDA Emerging Good Practices Task Force.

PubMed

Thokala, Praveen; Devlin, Nancy; Marsh, Kevin; Baltussen, Rob; Boysen, Meindert; Kalo, Zoltan; Longrenn, Thomas; Mussen, Filip; Peacock, Stuart; Watkins, John; Ijzerman, Maarten

2016-01-01

Health care decisions are complex and involve confronting trade-offs between multiple, often conflicting, objectives. Using structured, explicit approaches to decisions involving multiple criteria can improve the quality of decision making and a set of techniques, known under the collective heading multiple criteria decision analysis (MCDA), are useful for this purpose. MCDA methods are widely used in other sectors, and recently there has been an increase in health care applications. In 2014, ISPOR established an MCDA Emerging Good Practices Task Force. It was charged with establishing a common definition for MCDA in health care decision making and developing good practice guidelines for conducting MCDA to aid health care decision making. This initial ISPOR MCDA task force report provides an introduction to MCDA - it defines MCDA; provides examples of its use in different kinds of decision making in health care (including benefit risk analysis, health technology assessment, resource allocation, portfolio decision analysis, shared patient clinician decision making and prioritizing patients' access to services); provides an overview of the principal methods of MCDA; and describes the key steps involved. Upon reviewing this report, readers should have a solid overview of MCDA methods and their potential for supporting health care decision making. Copyright © 2016. Published by Elsevier Inc.

Dynamical signatures of isometric force control as a function of age, expertise, and task constraints.

PubMed

Vieluf, Solveig; Sleimen-Malkoun, Rita; Voelcker-Rehage, Claudia; Jirsa, Viktor; Reuter, Eva-Maria; Godde, Ben; Temprado, Jean-Jacques; Huys, Raoul

2017-07-01

From the conceptual and methodological framework of the dynamical systems approach, force control results from complex interactions of various subsystems yielding observable behavioral fluctuations, which comprise both deterministic (predictable) and stochastic (noise-like) dynamical components. Here, we investigated these components contributing to the observed variability in force control in groups of participants differing in age and expertise level. To this aim, young (18-25 yr) as well as late middle-aged (55-65 yr) novices and experts (precision mechanics) performed a force maintenance and a force modulation task. Results showed that whereas the amplitude of force variability did not differ across groups in the maintenance tasks, in the modulation task it was higher for late middle-aged novices than for experts and higher for both these groups than for young participants. Within both tasks and for all groups, stochastic fluctuations were lowest where the deterministic influence was smallest. However, although all groups showed similar dynamics underlying force control in the maintenance task, a group effect was found for deterministic and stochastic fluctuations in the modulation task. The latter findings imply that both components were involved in the observed group differences in the variability of force fluctuations in the modulation task. These findings suggest that between groups the general characteristics of the dynamics do not differ in either task and that force control is more affected by age than by expertise. However, expertise seems to counteract some of the age effects. NEW & NOTEWORTHY Stochastic and deterministic dynamical components contribute to force production. Dynamical signatures differ between force maintenance and cyclic force modulation tasks but hardly between age and expertise groups. Differences in both stochastic and deterministic components are associated with group differences in behavioral variability, and observed behavioral variability is more strongly task dependent than person dependent. Copyright © 2017 the American Physiological Society.

Offline decoding of end-point forces using neural ensembles: application to a brain-machine interface.

PubMed

Gupta, Rahul; Ashe, James

2009-06-01

Brain-machine interfaces (BMIs) hold a lot of promise for restoring some level of motor function to patients with neuronal disease or injury. Current BMI approaches fall into two broad categories--those that decode discrete properties of limb movement (such as movement direction and movement intent) and those that decode continuous variables (such as position and velocity). However, to enable the prosthetic devices to be useful for common everyday tasks, precise control of the forces applied by the end-point of the prosthesis (e.g., the hand) is also essential. Here, we used linear regression and Kalman filter methods to show that neural activity recorded from the motor cortex of the monkey during movements in a force field can be used to decode the end-point forces applied by the subject successfully and with high fidelity. Furthermore, the models exhibit some generalization to novel task conditions. We also demonstrate how the simultaneous prediction of kinematics and kinetics can be easily achieved using the same framework, without any degradation in decoding quality. Our results represent a useful extension of the current BMI technology, making dynamic control of a prosthetic device a distinct possibility in the near future.

75 FR 47624 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-06

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service U.S. Coral Reef Task Force Public Meeting and... (Service), announce a public meeting of the U.S. Coral Reef Task Force (USCRTF) and a request for written.... Coral Reef Task Force Department of the Interior Liaison, U.S. Department of the Interior, MS-3530-MIB...

75 FR 15457 - Aquatic Nuisance Species Task Force Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-29

...] Aquatic Nuisance Species Task Force Meeting AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice of meeting. SUMMARY: This notice announces a meeting of the Aquatic Nuisance Species (ANS) Task Force. The.... DATES: The ANS Task Force will meet from 8 a.m. to 5 p.m. on Wednesday, May 5, and from 8 a.m. to 5 p.m...

77 FR 23667 - Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-20

... CONTACT: Mail Delivery service through Recovering Warrior Task Force, Hoffman Building II, 200 Stovall St... Review of Non- Medical Case Management. 9:30-9:45 a.m. Break. 9:45-10:45 a.m. Task Force Recommendation... Task Force through the contact information in FOR FURTHER INFORMATION CONTACT, and this individual will...

Forest biomass as an energy source

Treesearch

P.E. Laks; R.W. Hemingway; A. Conner

1979-01-01

The Task Force on Forest Biomass as an Energy Source was chartered by the Society of American Foresters on September 26, 1977, and took its present form following an amendment to the charter on October 5, 1977. It built upon the findings of two previous task forces, the Task Force on Energy and Forest Resources and the Task Force for Evaluation of the CORRIM Report (...

NONLINEAR FORCE PROFILE USED TO INCREASE THE PERFORMANCE OF A HAPTIC USER INTERFACE FOR TELEOPERATING A ROBOTIC HAND

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anthony L. Crawford

MODIFIED PAPER TITLE AND ABSTRACT DUE TO SLIGHTLY MODIFIED SCOPE: TITLE: Nonlinear Force Profile Used to Increase the Performance of a Haptic User Interface for Teleoperating a Robotic Hand Natural movements and force feedback are important elements in using teleoperated equipment if complex and speedy manipulation tasks are to be accomplished in hazardous environments, such as hot cells, glove boxes, decommissioning, explosives disarmament, and space. The research associated with this paper hypothesizes that a user interface and complementary radiation compatible robotic hand that integrates the human hand’s anthropometric properties, speed capability, nonlinear strength profile, reduction of active degrees of freedommore » during the transition from manipulation to grasping, and just noticeable difference force sensation characteristics will enhance a user’s teleoperation performance. The main contribution of this research is in that a system that concisely integrates all these factors has yet to be developed and furthermore has yet to be applied to a hazardous environment as those referenced above. In fact, the most prominent slave manipulator teleoperation technology in use today is based on a design patented in 1945 (Patent 2632574) [1]. The robotic hand/user interface systems of similar function as the one being developed in this research limit their design input requirements in the best case to only complementing the hand’s anthropometric properties, speed capability, and linearly scaled force application relationship (e.g. robotic force is a constant, 4 times that of the user). In this paper a nonlinear relationship between the force experienced between the user interface and the robotic hand was devised based on property differences of manipulation and grasping activities as they pertain to the human hand. The results show that such a relationship when subjected to a manipulation task and grasping task produces increased performance compared to the traditional linear scaling techniques used by other systems. Key Words: Teleoperation, Robotic Hand, Robotic Force Scaling« less

The human power amplifier technology at the University of California, Berkeley.

PubMed

Kazerooni, H

1996-01-01

A human's ability to perform physical tasks is limited by physical strength, not by intelligence. We define "extenders" as a class of robot manipulators worn by humans to augment human mechanical strength, while the wearer's intellect remains the central control system for manipulating the extender. Our research objective is to determine the ground rules for the design and control of robotic systems worn by humans through the design, construction, and control of several prototype experimental direct-drive/non-direct-drive multi-degree-of-freedom hydraulic/electric extenders. The design of extenders is different from the design of conventional robots because the extender interfaces with the human on a physical level. Two sets of force sensors measure the forces imposed on the extender by the human and by the environment (i.e., the load). The extender's compliances in response to such contact forces were designed by selecting appropriate force compensators. This paper gives a summary of some of the selected research efforts related to Extender Technology, carried out during 1980s. The references, at the end of this article, give detailed description of the research efforts.

On the application of motivation theory to human factors/ergonomics: motivational design principles for human-technology interaction.

PubMed

Szalma, James L

2014-12-01

Motivation is a driving force in human-technology interaction. This paper represents an effort to (a) describe a theoretical model of motivation in human technology interaction, (b) provide design principles and guidelines based on this theory, and (c) describe a sequence of steps for the. evaluation of motivational factors in human-technology interaction. Motivation theory has been relatively neglected in human factors/ergonomics (HF/E). In both research and practice, the (implicit) assumption has been that the operator is already motivated or that motivation is an organizational concern and beyond the purview of HF/E. However, technology can induce task-related boredom (e.g., automation) that can be stressful and also increase system vulnerability to performance failures. A theoretical model of motivation in human-technology interaction is proposed, based on extension of the self-determination theory of motivation to HF/E. This model provides the basis for both future research and for development of practical recommendations for design. General principles and guidelines for motivational design are described as well as a sequence of steps for the design process. Human motivation is an important concern for HF/E research and practice. Procedures in the design of both simple and complex technologies can, and should, include the evaluation of motivational characteristics of the task, interface, or system. In addition, researchers should investigate these factors in specific human-technology domains. The theory, principles, and guidelines described here can be incorporated into existing techniques for task analysis and for interface and system design.

DOE Asset Revitalization: Sustainability and Waste Management Aspects - 12120

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Sharon M.

2012-07-01

In February 2011 Secretary of Energy Steven Chu established a Task Force on Asset Revitalization to facilitate a discussion among the Department of Energy (DOE), communities around DOE sites, non-profits, tribal governments, the private sector, and other stakeholders to identify reuse approaches as environmental cleanup efforts at DOE sites reach completion. The Task Force was charged with exploring opportunities to reuse DOE site assets for beneficial purposes and making recommendations to the Under Secretaries of Energy, Science, and Nuclear Security on the formation of an Asset Revitalization Initiative (ARI). The ARI is a Department-wide effort to advance the beneficial reusemore » of the DOE's unique and diverse mix of assets including land, facilities, infrastructure, equipment, technologies, natural resources, and a highly skilled workforce. The ARI will encourage collaboration between the public and private sectors in order to achieve energy and environmental goals as well as to stimulate and diversify regional economies. The recommendations of the ARI Task Force are summarized below, focusing on the sustainability and waste management aspects. DOE's ongoing completion of cleanup efforts and modernization efforts is creating opportunities to transition under-used or excess assets to future beneficial use. The FY 2011 DOE ARI Task Force determined that DOE's assets could be reused for beneficial purposes such as clean energy production, industrial manufacturing, recreational and conversation use, and other economic development initiatives. Asset revitalization has the potential to both help achieve DOE's energy and environmental goals and diversify regional economies where the sites are located, including providing the support needed to implement large-scale projects that achieve green sustainability goals. Asset revitalization efforts could be accelerated by effectively incorporating future use plans into environmental management and remediation efforts. (authors)« less

FRAX(®) Bone Mineral Density Task Force of the 2010 Joint International Society for Clinical Densitometry & International Osteoporosis Foundation Position Development Conference.

PubMed

Lewiecki, E Michael; Compston, Juliet E; Miller, Paul D; Adachi, Jonathan D; Adams, Judith E; Leslie, William D; Kanis, John A

2011-01-01

FRAX(®) is a fracture risk assessment algorithm developed by the World Health Organization in cooperation with other medical organizations and societies. Using easily available clinical information and femoral neck bone mineral density (BMD) measured by dual-energy X-ray absorptiometry (DXA), when available, FRAX(®) is used to predict the 10-year probability of hip fracture and major osteoporotic fracture. These values may be included in country specific guidelines to aid clinicians in determining when fracture risk is sufficiently high that the patient is likely to benefit from pharmacological therapy to reduce that risk. Since the introduction of FRAX(®) into clinical practice, many practical clinical questions have arisen regarding its use. To address such questions, the International Society for Clinical Densitometry (ISCD) and International Osteoporosis Foundations (IOF) assigned task forces to review the best available medical evidence and make recommendations for optimal use of FRAX(®) in clinical practice. Questions were identified and divided into three general categories. A task force was assigned to investigating the medical evidence in each category and developing clinically useful recommendations. The BMD Task Force addressed issues that included the potential use of skeletal sites other than the femoral neck, the use of technologies other than DXA, and the deletion or addition of clinical data for FRAX(®) input. The evidence and recommendations were presented to a panel of experts at the ISCD-IOF FRAX(®) Position Development Conference, resulting in the development of ISCD-IOF Official Positions addressing FRAX(®)-related issues. Copyright © 2011 The International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

Hand controllers for teleoperation. A state-of-the-art technology survey and evaluation

NASA Technical Reports Server (NTRS)

Brooks, T. L.; Bejczy, A. K.

1985-01-01

Hand controller technology for teleoperation is surveyed in three major catagories: (1) hand grip design, (2) control input devices, and (3) control strategies. In the first category, 14 hand grip designs are reviewed and evaluated in light of human factor considerations. In the second, 12 hand controller input devices are evaluated in terms of task performance, configuration and force feedback, controller/slave correspondence, operating volume, operator workload, human limitations, cross coupling, singularities, anthropomorphic characteristics, physical complexity, control/display interference, accuracy, technological base, cost, and reliability. In the third catagory, control strategies, commonly called control modes, are surveyed and evaluated. The report contains a bibliography with 189 select references on hand controller technology.

Control of force during rapid visuomotor force-matching tasks can be described by discrete time PID control algorithms.

PubMed

Dideriksen, Jakob Lund; Feeney, Daniel F; Almuklass, Awad M; Enoka, Roger M

2017-08-01

Force trajectories during isometric force-matching tasks involving isometric contractions vary substantially across individuals. In this study, we investigated if this variability can be explained by discrete time proportional, integral, derivative (PID) control algorithms with varying model parameters. To this end, we analyzed the pinch force trajectories of 24 subjects performing two rapid force-matching tasks with visual feedback. Both tasks involved isometric contractions to a target force of 10% maximal voluntary contraction. One task involved a single action (pinch) and the other required a double action (concurrent pinch and wrist extension). 50,000 force trajectories were simulated with a computational neuromuscular model whose input was determined by a PID controller with different PID gains and frequencies at which the controller adjusted muscle commands. The goal was to find the best match between each experimental force trajectory and all simulated trajectories. It was possible to identify one realization of the PID controller that matched the experimental force produced during each task for most subjects (average index of similarity: 0.87 ± 0.12; 1 = perfect similarity). The similarities for both tasks were significantly greater than that would be expected by chance (single action: p = 0.01; double action: p = 0.04). Furthermore, the identified control frequencies in the simulated PID controller with the greatest similarities decreased as task difficulty increased (single action: 4.0 ± 1.8 Hz; double action: 3.1 ± 1.3 Hz). Overall, the results indicate that discrete time PID controllers are realistic models for the neural control of force in rapid force-matching tasks involving isometric contractions.

Improving Dual-Task Control With a Posture-Second Strategy in Early-Stage Parkinson Disease.

PubMed

Huang, Cheng-Ya; Chen, Yu-An; Hwang, Ing-Shiou; Wu, Ruey-Meei

2018-03-31

To examine the task prioritization effects on postural-suprapostural dual-task performance in patients with early-stage Parkinson disease (PD) without clinically observed postural symptoms. Cross-sectional study. Participants performed a force-matching task while standing on a mobile platform, and were instructed to focus their attention on either the postural task (posture-first strategy) or the force-matching task (posture-second strategy). University research laboratory. Individuals (N=16) with early-stage PD who had no clinically observed postural symptoms. Not applicable. Dual-task change (DTC; percent change between single-task and dual-task performance) of posture error, posture approximate entropy (ApEn), force error, and reaction time (RT). Positive DTC values indicate higher postural error, posture ApEn, force error, and force RT during dual-task conditions compared with single-task conditions. Compared with the posture-first strategy, the posture-second strategy was associated with smaller DTC of posture error and force error, and greater DTC of posture ApEn. In contrast, greater DTC of force RT was observed under the posture-second strategy. Contrary to typical recommendations, our results suggest that the posture-second strategy may be an effective dual-task strategy in patients with early-stage PD who have no clinically observed postural symptoms in order to reduce the negative effect of dual tasking on performance and facilitate postural automaticity. Copyright © 2018 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

City Meets the Cable: A Case Study in Technological Innovation and Community Decision-Making. Publication 75-7.

ERIC Educational Resources Information Center

Kalba, Kas

The cable television decision-making process in Cincinnati, Ohio between 1969 and 1974 was investigated in detail. Data were obtained primarily through a series of open-ended interviews with various decision-making praticipants, including members of a Task Force on Urban Cable Communications, members of the city council and municipal agencies,…

AIR VEHICLE INTEGRATION AND TECHNOLOGY RESEARCH (AVIATR) Task Order 0015: Predictive Capability for Hypersonic Structural Response and Life Prediction: Phase 1-Identification of Knowledge Gaps, Volume 1: Nonproprietary Version

DTIC Science & Technology

2010-09-01

22 Figure 23. Flow Type and the reference empirical model ............................................................ 24 Figure 24. Baseline...Trajectory ...................................................................................................... 25 Figure 25. Flow Features Important...94 viii GLOSSARY ACCTE Advanced Ceramic Composites for Turbine Engines AFRL Air Force Research Laboratory AoA Angle of Attack ASE

THE USE OF CHEMICALS AS FUNGICIDES, BACTERICIDES AND NEMATOCIDES. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 4.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

THE PURPOSE OF THIS GUIDE IS TO ASSIST TEACHERS IN PREPARING POST-SECONDARY EDUCATION STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS. ONE OF A SERIES FOR THESE OCCUPATIONS, THIS MODULE WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES. SECTIONS ARE (1) PLANT DISEASE AND NEMATODE PREVENTION, CONTROL, OR ERADICATION WITH…

Challenges in ethics, safety, best practices, and oversight regarding HIT vendors, their customers, and patients: a report of an AMIA special task force.

PubMed

Goodman, Kenneth W; Berner, Eta S; Dente, Mark A; Kaplan, Bonnie; Koppel, Ross; Rucker, Donald; Sands, Daniel Z; Winkelstein, Peter

2011-01-01

The current commercial health information technology (HIT) arena encompasses a number of competing firms that provide electronic health applications to hospitals, clinical practices, and other healthcare-related entities. Such applications collect, store, and analyze patient information. Some vendors incorporate contract language whereby purchasers of HIT systems, such as hospitals and clinics, must indemnify vendors for malpractice or personal injury claims, even if those events are not caused or fostered by the purchasers. Some vendors require contract clauses that force HIT system purchasers to adopt vendor-defined policies that prevent the disclosure of errors, bugs, design flaws, and other HIT-software-related hazards. To address this issue, the AMIA Board of Directors appointed a Task Force to provide an analysis and insights. Task Force findings and recommendations include: patient safety should trump all other values; corporate concerns about liability and intellectual property ownership may be valid but should not over-ride all other considerations; transparency and a commitment to patient safety should govern vendor contracts; institutions are duty-bound to provide ethics education to purchasers and users, and should commit publicly to standards of corporate conduct; and vendors, system purchasers, and users should encourage and assist in each others' efforts to adopt best practices. Finally, the HIT community should re-examine whether and how regulation of electronic health applications could foster improved care, public health, and patient safety.

Challenges in ethics, safety, best practices, and oversight regarding HIT vendors, their customers, and patients: a report of an AMIA special task force

PubMed Central

Berner, Eta S; Dente, Mark A; Kaplan, Bonnie; Koppel, Ross; Rucker, Donald; Sands, Daniel Z; Winkelstein, Peter

2010-01-01

The current commercial health information technology (HIT) arena encompasses a number of competing firms that provide electronic health applications to hospitals, clinical practices, and other healthcare-related entities. Such applications collect, store, and analyze patient information. Some vendors incorporate contract language whereby purchasers of HIT systems, such as hospitals and clinics, must indemnify vendors for malpractice or personal injury claims, even if those events are not caused or fostered by the purchasers. Some vendors require contract clauses that force HIT system purchasers to adopt vendor-defined policies that prevent the disclosure of errors, bugs, design flaws, and other HIT-software-related hazards. To address this issue, the AMIA Board of Directors appointed a Task Force to provide an analysis and insights. Task Force findings and recommendations include: patient safety should trump all other values; corporate concerns about liability and intellectual property ownership may be valid but should not over-ride all other considerations; transparency and a commitment to patient safety should govern vendor contracts; institutions are duty-bound to provide ethics education to purchasers and users, and should commit publicly to standards of corporate conduct; and vendors, system purchasers, and users should encourage and assist in each others' efforts to adopt best practices. Finally, the HIT community should re-examine whether and how regulation of electronic health applications could foster improved care, public health, and patient safety. PMID:21075789

Interagency Task Forces: The Right Tools for the Job

DTIC Science & Technology

2011-01-01

shortcomings. This analysis discusses four organizational reform models and recommends the interagency task force ( IATF ) as the preferred structure...model.64 Still others recommend creating and deploying ad hoc IATFs for crisis operations. These interagency task forces would be task- organized to...forces assigned for planning, exercises, and mission execution.65 A 2005 article in Policy Review recommended developing IATFs as needed for specific

Vocational Evaluation and Work Adjustment Bulletin; Vol. 8, Special Edition: Vocational Evaluation Project Final Report Part 2.

ERIC Educational Resources Information Center

Vocational Evaluation and Work Adjustment Association, Washington, DC.

Part 2 of the three-part Vocational Evaluation Project final report contains brief summaries of the seven task force report which comprise the final report and two such task force reports. The report of task force 5, Standards for Vocational Evaluation, describes the task force's effort to study the standards for accreditation presently used by…

Comparing the Values Hierarchy of the Kentucky Department of Education's Character/Values Task Force. Comparing a Character/Values Task Force to a National Sample.

ERIC Educational Resources Information Center

Butler, Fonda P.

In March 1989, the Kentucky Department of Education assembled a task force to make recommendations regarding the issue of teaching values and character in public schools in Kentucky. The 23-member task force represented educators, parents, the legislature, state and local school boards, law enforcement agencies, higher education, Catholic…

Task Force on Defense Strategies for Ensuring the Resilience of National Space Capabilities. Executive Summary

DTIC Science & Technology

2017-03-21

March 2017 Task Force on Defense Strategies for Ensuring the Resilience of National Space Capabilities OFFICE OF THE UNDER SECRETARY OF...the Department of Defense. The DSB Task Force on Defense Strategies for Ensuring the Resilience of National Space Capabilities completed its formal...Ensuring the Resilience of National Space Capabilities | i DSB Task Force on Defense Strategies for Ensuring the

Communicating with New and Existing Markets. A Task Force of Howard Community College's 1998-1999 Commission on the Future.

ERIC Educational Resources Information Center

Howard Community Coll., Columbia, MD.

This is a report from a task force formed by Howard Community College (Maryland) to examine existing and future markets. The task force also explored ways to use marketing strategies to attract potential customers to the college. The task force recommends that the college use its strengths to attract customers, such as its commitment to open…

Congressional liaison task force - a briefing of the October 1994 meeting

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-12-31

As the US Senate overturned roadblocks attempting-unsuccessfully-to halt passage of the elementary and secondary education reauthorization legislation representatives from several federal agencies and laboratories addressed Congressional Liaison Task Force (CLTF) participants October 12th. They spoke about their commitment, programs, and accomplishments toward the nation`s science knowledge, particularly at the precollege level. Marjorie S. Steinberg legislative assistant to bill cosponsor Sen. Jeff Bingaman (DNM), and Gary Allen, Triangle Coalition director of Governmental affairs, spoke about education legislation and specifically about the Technology for Education Act that was on the Senate floor for a vote in October and now is law. Brucemore » A. Fuchs talked about the National Institute of Health`s (NIH) work in science literacy and education. The National Aeronautics and Space Administration`s (NASA) Frank C. Owens and Eddie Anderson contributed to this report.« less

[The global harmonization task force : successes and challenges].

PubMed

Rotter, R G

2009-06-01

With the move towards globalized international commerce and trade, a call for harmonization of medical device regulatory requirements and practices has evolved. The purpose of the Global Harmonization Task Force (GHTF) is to encourage convergence of regulatory requirements and practices at a global level through consensus to achieve four principle goals: promote safety, quality and performance/effectiveness of medical devices; encourage technological innovation; foster international trade; and serve as a forum of information exchange - all in the interests of protecting and promoting public health. The GHTF is governed by a Steering Committee, and the principle development of the GHTF regulatory model has been, and continues to be, done through five working groups known as Study Groups and supplemented recently by the creation of several Ad Hoc Working Groups. Since its creation in 1992, the members of the GHTF have worked collaboratively to develop what is now ready to be called a global model for the regulation of medical devices.

Report of the Defense Science Board Task Force on Quality of Life.

DTIC Science & Technology

1995-10-15

The Quality of Life Task Force is deeply grateful to those distinguished Americans who served as Counselors to the Task Force. Although they did not... Quality of Life issues to the readiness and well being of our Armed Forces. Their willingness to offer suggestions and advice on topics within their...respective expertise was most helpful The recommendations of the Report are those of the Quality of Life Task Force; and Counselors may, or may not, concur in whole or in part with them.

Screening for Hepatitis C Infections in Adults

MedlinePlus

Understanding Task Force Recommendations Screening for Hepatitis C Virus Infection in Adults The U.S. Preventive Services Task Force (Task Force) has issued a final recommendation statement on Screening for Hepatitis C ...

Report of the Task Force for Improved Coordination of the DoD Science and Technology Program. Volume 1. Summary Report and Recommendations

DTIC Science & Technology

1988-08-01

be possible for management at all levels to review the S&T Program in order to optimize the investment in two ways--(1) over time and (2) by priority...easier at the higher management levels. a. Optimizing Over Time One concern in investing in new technology is to balance the near-term and far-term... managed and integrated into systems that meet the perceived threat on a timely basis. To this end, the Core Group formed working groups to find

U.S. Preventive Services Task Force

MedlinePlus

... USPSTF Our Members Conflict of Interest Disclosures Task Force Resources Our Partners Reports to Congress Contact Us ... effort to make the U.S. Preventive Services Task Force (USPSTF) recommendations clearer and its processes more transparent, ...

A European Federated Cloud: Innovative distributed computing solutions by EGI

NASA Astrophysics Data System (ADS)

Sipos, Gergely; Turilli, Matteo; Newhouse, Steven; Kacsuk, Peter

2013-04-01

The European Grid Infrastructure (EGI) is the result of pioneering work that has, over the last decade, built a collaborative production infrastructure of uniform services through the federation of national resource providers that supports multi-disciplinary science across Europe and around the world. This presentation will provide an overview of the recently established 'federated cloud computing services' that the National Grid Initiatives (NGIs), operators of EGI, offer to scientific communities. The presentation will explain the technical capabilities of the 'EGI Federated Cloud' and the processes whereby earth and space science researchers can engage with it. EGI's resource centres have been providing services for collaborative, compute- and data-intensive applications for over a decade. Besides the well-established 'grid services', several NGIs already offer privately run cloud services to their national researchers. Many of these researchers recently expressed the need to share these cloud capabilities within their international research collaborations - a model similar to the way the grid emerged through the federation of institutional batch computing and file storage servers. To facilitate the setup of a pan-European cloud service from the NGIs' resources, the EGI-InSPIRE project established a Federated Cloud Task Force in September 2011. The Task Force has a mandate to identify and test technologies for a multinational federated cloud that could be provisioned within EGI by the NGIs. A guiding principle for the EGI Federated Cloud is to remain technology neutral and flexible for both resource providers and users: • Resource providers are allowed to use any cloud hypervisor and management technology to join virtualised resources into the EGI Federated Cloud as long as the site is subscribed to the user-facing interfaces selected by the EGI community. • Users can integrate high level services - such as brokers, portals and customised Virtual Research Environments - with the EGI Federated Cloud as long as these services access cloud resources through the user-facing interfaces selected by the EGI community. The Task Force will be closed in May 2013. It already • Identified key enabling technologies by which a multinational, federated 'Infrastructure as a Service' (IaaS) type cloud can be built from the NGIs' resources; • Deployed a test bed to evaluate the integration of virtualised resources within EGI and to engage with early adopter use cases from different scientific domains; • Integrated cloud resources into the EGI production infrastructure through cloud specific bindings of the EGI information system, monitoring system, authentication system, etc.; • Collected and catalogued requirements concerning the federated cloud services from the feedback of early adopter use cases; • Provided feedback and requirements to relevant technology providers on their implementations and worked with these providers to address those requirements; • Identified issues that need to be addressed by other areas of EGI (such as portal solutions, resource allocation policies, marketing and user support) to reach a production system. The Task Force will publish a blueprint in April 2013. The blueprint will drive the establishment of a production level EGI Federated Cloud service after May 2013.

78 FR 10127 - Request for Nominations to the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-13

... Conservation Service Request for Nominations to the Agricultural Air Quality Task Force AGENCY: Natural... Nominations to the Agricultural Air Quality Task Force. SUMMARY: The Secretary of Agriculture invites... Force (AAQTF) which was established by the Federal Agriculture Improvement and Reform Act of 1996 to...

Science and Sandy: Lessons Learned

NASA Astrophysics Data System (ADS)

Werner, K.

2013-12-01

Following Hurricane Sandy's impact on the mid-Atlantic region, President Obama established a Task Force to '...ensure that the Federal Government continues to provide appropriate resources to support affected State, local, and tribal communities to improve the region's resilience, health, and prosperity by building for the future.' The author was detailed from NOAA to the Task Force between January and June 2013. As the Task Force and others began to take stock of the region's needs and develop plans to address them, many diverse approaches emerged from different areas of expertise including: infrastructure, management and construction, housing, public health, and others. Decision making in this environment was complex with many interests and variables to consider and balance. Although often relevant, science and technical expertise was not always at the forefront of this process. This talk describes the author's experience with the Sandy Task Force focusing on organizing scientific expertise to support the work of the Task Force. This includes a description of federal activity supporting Sandy recovery efforts, the role of the Task Force, and lessons learned from developing a science support function within the Task Force.

Force related hemodynamic responses during execution and imagery of a hand grip task: A functional near infrared spectroscopy study.

PubMed

Wriessnegger, Selina C; Kirchmeyr, Daniela; Bauernfeind, Günther; Müller-Putz, Gernot R

2017-10-01

We examined force related hemodynamic changes during the performance of a motor execution (ME) and motor imagery (MI) task by means of multichannel functional near infrared spectroscopy (fNIRS). The hemodynamic responses of fourteen healthy participants were measured while they performed a hand grip execution or imagery task with low and high grip forces. We found an overall higher increase of [oxy-Hb] concentration changes during ME for both grip forces but with a delayed peak maximum for the lower grip force. During the MI task with lower grip force, the [oxy-Hb] level increases are stronger compared to the MI with higher grip force. The facilitation in performing MI with higher grip strength might thus indicate less inhibition of the actual motor act which could also explain the later increase onset of [oxy-Hb] in the ME task with the lower grip force. Our results suggest that execution and imagery of a hand grip task with high and low grip forces, leads to different cortical activation patterns. Since impaired control of grip forces during object manipulation in particular is one aspect of fine motor control deficits after stroke, our study will contribute to future rehabilitation programs enhancing patient's grip force control. Copyright © 2017 Elsevier Inc. All rights reserved.

Optimizing the post-START (Strategic Arms Reduction Treaty) US strategic nuclear force mix. Master's thesis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leary, D.A.

1989-06-01

This thesis examines the impact a START agreement might have on the United States and Soviet strategic nuclear forces. It then proposes an optimum post-START force mix for the United States and the Soviet Union. The current, as well as projected, post-START targeting policies are discussed. It is concluded that the impact of a START agreement on the current U.S. strategic targeting policy will be minimal. Although the target data base will not shrink as much as the forces tasked to cover it, a prioritization of targets is all that should be necessary with a post-START force. A START agreementmore » will mean major reductions in U.S. and Soviet strategic nuclear forces. As proposed in this thesis, only the ICBM leg of the Triad will require any major re-structuring. This would include the addition of mobile ICBM systems. The SLBM and bomber legs will feel minimal changes (i.e., retiring POSEIDON SSBNs and retiring or converting some older B-52s). It is recommended that the B-52 program be cancelled, and funding be re-directed into mobile ICBM systems. By doing so the United States could utilize technology available today to strengthen its forces and not gamble on the low-observable technology which a stealth bomber might have.« less

Integrated dynamic and static tactile sensor: focus on static force sensing

NASA Astrophysics Data System (ADS)

Wettels, Nicholas; Pletner, Baruch

2012-04-01

Object grasping by robotic hands in unstructured environments demands a sensor that is durable, compliant, and responsive to static and dynamic force conditions. In order for a tactile sensor to be useful for grasp control in these, it should have the following properties: tri-axial force sensing (two shear plus normal component), dynamic event sensing across slip frequencies, compliant surface for grip, wide dynamic range (depending on application), insensitivity to environmental conditions, ability to withstand abuse and good sensing behavior (e.g. low hysteresis, high repeatability). These features can be combined in a novel multimodal tactile sensor. This sensor combines commercial-off-the-shelf MEMS technology with two proprietary force sensors: a high bandwidth device based on PZT technology and low bandwidth device based on elastomers and optics. In this study, we focus on the latter transduction mechanism and the proposed architecture of the completed device. In this study, an embedded LED was utilized to produce a constant light source throughout a layer of silicon rubber which covered a plastic mandrel containing a set of sensitive phototransistors. Features about the contacted object such as center of pressure and force vectors can be extracted from the information in the changing patterns of light. The voltage versus force relationship obtained with this molded humanlike finger had a wide dynamic range that coincided with forces relevant for most human grip tasks.

78 FR 28580 - Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-15

... DEPARTMENT OF DEFENSE Office of the Secretary Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Members of the Armed Forces AGENCY: Office... Defense announces the following Federal Advisory Committee meeting of the Department of Defense Task Force...

77 FR 68744 - Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

... DEPARTMENT OF DEFENSE Office of the Secretary Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Members of the Armed Forces; Federal... Committee meeting of the Department of Defense Task Force on the Care, Management, and Transition of...

75 FR 59698 - Federal Advisory Committee; Department of Defense Task Force on the Care, Management, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-28

.... SUPPLEMENTARY INFORMATION: The Task Force is a non-discretionary Federal advisory committee established to (a... for wounded, ill, and injured members of the Armed Forces; ii. Medical case management; iii. Non... Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Member of...

Report of Defense Science Board Task Force on Industry-to-Industry International Armaments Cooperation. Phase II. Japan

DTIC Science & Technology

1984-06-01

TEMPERATURE MAT’LS IMAGE RECOGNITION ROCKET PROPULSION SPEECH RECOGNITION/TRANSLATION COMPUTER-AIDED DESIGN ARTIFICIAL INTELLIGENCE PRODUCTION TECHNOLOGY...planning, intelligence exchange, and logistics. While not called out in the Guidelines, any further standardization in equipments and interoperability...COST AND TIME THAN DEVELCPING THEM -ESTABLISHMENT OF PRODUCTIVE LONG-TERM BUSINESS RELATIONSH IPS WITH JAPANESE COMPAN IES * PROBLEM -POSSIBILITY OF

THE USE OF CHEMICALS TO CONTROL FIELD RODENTS AND OTHER PREDATORS. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 5.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

THE PURPOSE OF THIS GUIDE IS TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS. IT IS ONE OF A SERIES OF MODULES DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES. SECTIONS ARE (1) USE OF CHEMICALS FOR RODENT CONTROL AND ERADICATION, (2) TERMINOLOGY AND COMPUTATIONS, (3) RODENT…

Defense Science Board Task Force on SEA BASING

DTIC Science & Technology

2003-08-01

to: Consider the operational requirements, the assets required, the role(s) of new technologies, and the effects of “jointness” Examine the...improve effectiveness , efficiency or economy? Are there other doctrine, organizational, training, materiel, leadership, personnel or facilities aspects...sea of all four Services In effect , sea basing must become a truly joint concept with capabilities that allow for the projection of the full

Putting the Information Infrastructure to Work. Report of the Information Infrastructure Task Force Committee on Applications and Technology. NIST Special Publication 857.

ERIC Educational Resources Information Center

National Inst. of Standards and Technology, Gaithersburg, MD.

An interconnection of computer networks, telecommunications services, and applications, the National Information Infrastructure (NII) can open up new vistas and profoundly change much of American life. This report explores some of the opportunities and obstacles to the use of the NII by people and organizations. The goal is to express how…

Technology Options for Multimedia in Distance Learning. A Report for the Commission of the European Communities--Task Force Human Resources, Education, Training, and Youth.

ERIC Educational Resources Information Center

Sherwood-Roberts, P.; Vervest, P.

This report focuses on interactive multimedia delivery platforms available for distance education. An introduction addresses the role of distance education and open learning in covering training needs and advantages of interactive multimedia in training. Chapter 2 proposes a multimedia skills evaluation framework and examines the elements of this…

An Analysis of Competencies for Managing Science and Technology Programs

DTIC Science & Technology

2008-03-19

competency modeling through a two-year task force commissioned by the Society for Industrial and Organizational Psychology (Shippmann and others, 2000:704...positions—specifically within Research and Development (R&D) programs. If so, the final investigative question tests whether those differences are...statistics are used to analyze the comparisons through hypothesis testing and t- tests relevant to the research investigative questions. These

Sustaining the Light-Heavy Brigade

DTIC Science & Technology

1991-06-07

of the combined arms concept. In the twentieth century technology made a significant impact on how units were organized and fought. One of these...34Support personnel must use innovation , suspend normal procedures when necessary, take advantage of unusual sources of supply and transportation and take...designed to be broken out to individual task forces. Therefore, support planners must be innovative in developing a solution that best supports the

An Integrated Approach to the Teaching and Learning of Science and Mathematics Utilising Technology--The Teachers' Perspective

ERIC Educational Resources Information Center

Johnston, Jennifer; Riordain, Maire Ni; Walshe, Grainne

2014-01-01

The concept and importance of curriculum integration in Science and Mathematics has come to the fore in the recent years (Czerniak, 2007). Ireland's Science and Mathematics performance is well documented and extensively reported in the media and elsewhere (e.g. Expert Group on Future Skills Needs, 2008; Task Force on the Physical Sciences, 2002).…

Processes and process development in Taiwan

NASA Technical Reports Server (NTRS)

Hwang, H. L.

1986-01-01

Silicon material research in the Republic of China (ROC) parallels its development in the electronic industry. A brief outline of the historical development in ROC silicon material research is given. Emphasis is placed on the recent Silane Project managed by the National Science Council, ROC, including project objectives, task forces, and recent accomplishments. An introduction is also given to industrialization of the key technologies developed in this project.

Medical Situational Awareness in Theater Advanced Concept Technology Demonstration Project Proposal

DTIC Science & Technology

2004-06-01

making it an impossible task to sort, understand , and generate actionable knowledge within operational timeframes. Medical Situational Awareness in...need for greater medical situation awareness in theater and for greater integration of theater medical information into the net-centric rapid...There is a need for greater Medical Situation Awareness in theater and for greater integration of theater medical information into the ForceNet

Identity Management Task Force Report 2008

DTIC Science & Technology

2008-01-01

Telecommunication Grid ( GTG ) consists of the public- switched telecommunications network (PSTN), various forms of Internet protocol (IP) networks...to network providers) to a large community of nomadic users and access devices over a wide range of access technologies. The GTG is notional, and...DOC Dr. Myra Gray , DOD Greg Hall, DNI Celia Hanley, DOD Patrick Hannon, DNI James Hass, IC Linda Hill, SSA Bobby Jones, DOC Patrick Hannon

PRN 2009-1: Establishment of Antimicrobial Exposure Assessment Task Force II

EPA Pesticide Factsheets

This PR notice announces the establishment of the Antimicrobial Exposure Assessment Task Force II, an industry-wide task force to develop mixer, loader, applicator and post-application exposure data for antimicrobial pesticides used in various settings.

Practice and Age-Related Loss of Adaptability in Sensorimotor Performance

PubMed Central

Sosnoff, Jacob J.; Voudrie, Stefani J.

2009-01-01

The purpose of the present investigation was to examine whether the ability to adapt to task constraints is influenced by short-term practice in older adults. Young (18–29 years old) and old (65–75 years old) adults produced force output to a constant force target and a 1-Hz sinusoidal force target by way of the index finger flexion. Participants completed each task 5 times per session for 5 concurrent sessions. The amount and structure of force variability was calculated using linear and nonlinear analyses. As expected, there was a decrease in the magnitude of variability (coefficient of variation) in both tasks and task-related change in the structure of force variability (approximate entropy) with training across groups. The authors found older adults to have a greater amount of variability than their younger counterparts in both tasks. Older adults also demonstrated an increase in the structure of force output in the constant task but a decrease in structure in the sinusoidal task. Age differences in the adaptability to task constraints persisted throughout practice. The authors propose that older adults' ability to adapt sensorimotor output to task demands is not a result of lack of familiarity with the task but that it is, instead, characteristic of the aging process. PMID:19201684

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hannum, David W.; Shannon, Gary W.

This report describes the collaboration between the South Texas Specialized Crimes and Narcotics Task Force (STSCNTF) and Sandia National Laboratories (SNL) in a field test that provided prototype hand-held trace detection technology for use in counter-drug operations. The National Institute of Justice (NIJ)/National Law Enforcement and Corrections Technology Center (NLECTC)/Border Research and Technology Center (BRTC) was contacted by STSCNTF for assistance in obtaining cutting-edge technology. The BRTC created a pilot project for Sandia National Laboratories (SNL) and the STSCNTF for the use of SNL’s Hound, a hand-held sample collection and preconcentration system that, when combined with a commercial chemical detector,more » can be used for the trace detection of illicit drugs and explosives. The STSCNTF operates in an area of high narcotics trafficking where methods of concealment make the detection of narcotics challenging. Sandia National Laboratories’ (SNL) Contraband Detection Department personnel provided the Hound system hardware and operational training. The Hound system combines the GE VaporTracer2, a hand-held commercial chemical detector, with an SNL-developed sample collection and preconcentration system. The South Texas Task force reported a variety of successes, including identification of a major shipment of methamphetamines, the discovery of hidden compartments in vehicles that contained illegal drugs and currency used in drug deals, and the identification of a suspect in a nightclub shooting. The main advantage of the hand-held trace detection unit is its ability to quickly identify the type of chemical (drugs or explosives) without a long lag time for laboratory analysis, which is the most common analysis method for current law enforcement procedures.« less

Tibiofemoral contact forces during walking, running and sidestepping.

PubMed

Saxby, David J; Modenese, Luca; Bryant, Adam L; Gerus, Pauline; Killen, Bryce; Fortin, Karine; Wrigley, Tim V; Bennell, Kim L; Cicuttini, Flavia M; Lloyd, David G

2016-09-01

We explored the tibiofemoral contact forces and the relative contributions of muscles and external loads to those contact forces during various gait tasks. Second, we assessed the relationships between external gait measures and contact forces. A calibrated electromyography-driven neuromusculoskeletal model estimated the tibiofemoral contact forces during walking (1.44±0.22ms(-1)), running (4.38±0.42ms(-1)) and sidestepping (3.58±0.50ms(-1)) in healthy adults (n=60, 27.3±5.4years, 1.75±0.11m, and 69.8±14.0kg). Contact forces increased from walking (∼1-2.8 BW) to running (∼3-8 BW), sidestepping had largest maximum total (8.47±1.57 BW) and lateral contact forces (4.3±1.05 BW), while running had largest maximum medial contact forces (5.1±0.95 BW). Relative muscle contributions increased across gait tasks (up to 80-90% of medial contact forces), and peaked during running for lateral contact forces (∼90%). Knee adduction moment (KAM) had weak relationships with tibiofemoral contact forces (all R(2)<0.36) and the relationships were gait task-specific. Step-wise regression of multiple external gait measures strengthened relationships (0.20

Air Force construction automation/robotics

NASA Technical Reports Server (NTRS)

Nease, AL; Dusseault, Christopher

1994-01-01

The Air Force has several unique requirements that are being met through the development of construction robotic technology. The missions associated with these requirements place construction/repair equipment operators in potentially harmful situations. Additionally, force reductions require that human resources be leveraged to the maximum extent possible and that more stringent construction repair requirements push for increased automation. To solve these problems, the U.S. Air Force is undertaking a research and development effort at Tyndall AFB, FL to develop robotic teleoperation, telerobotics, robotic vehicle communications, automated damage assessment, vehicle navigation, mission/vehicle task control architecture, and associated computing environment. The ultimate goal is the fielding of robotic repair capability operating at the level of supervised autonomy. The authors of this paper will discuss current and planned efforts in construction/repair, explosive ordnance disposal, hazardous waste cleanup, fire fighting, and space construction.

Developing a framework for energy technology portfolio selection

NASA Astrophysics Data System (ADS)

Davoudpour, Hamid; Ashrafi, Maryam

2012-11-01

Today, the increased consumption of energy in world, in addition to the risk of quick exhaustion of fossil resources, has forced industrial firms and organizations to utilize energy technology portfolio management tools viewed both as a process of diversification of energy sources and optimal use of available energy sources. Furthermore, the rapid development of technologies, their increasing complexity and variety, and market dynamics have made the task of technology portfolio selection difficult. Considering high level of competitiveness, organizations need to strategically allocate their limited resources to the best subset of possible candidates. This paper presents the results of developing a mathematical model for energy technology portfolio selection at a R&D center maximizing support of the organization's strategy and values. The model balances the cost and benefit of the entire portfolio.

Fitts' Law in the Control of Isometric Grip Force With Naturalistic Targets.

PubMed

Thumser, Zachary C; Slifkin, Andrew B; Beckler, Dylan T; Marasco, Paul D

2018-01-01

Fitts' law models the relationship between amplitude, precision, and speed of rapid movements. It is widely used to quantify performance in pointing tasks, study human-computer interaction, and generally to understand perceptual-motor information processes, including research to model performance in isometric force production tasks. Applying Fitts' law to an isometric grip force task would allow for quantifying grasp performance in rehabilitative medicine and may aid research on prosthetic control and design. We examined whether Fitts' law would hold when participants attempted to accurately produce their intended force output while grasping a manipulandum when presented with images of various everyday objects (we termed this the implicit task). Although our main interest was the implicit task, to benchmark it and establish validity, we examined performance against a more standard visual feedback condition via a digital force-feedback meter on a video monitor (explicit task). Next, we progressed from visual force feedback with force meter targets to the same targets without visual force feedback (operating largely on feedforward control with tactile feedback). This provided an opportunity to see if Fitts' law would hold without vision, and allowed us to progress toward the more naturalistic implicit task (which does not include visual feedback). Finally, we changed the nature of the targets from requiring explicit force values presented as arrows on a force-feedback meter (explicit targets) to the more naturalistic and intuitive target forces implied by images of objects (implicit targets). With visual force feedback the relation between task difficulty and the time to produce the target grip force was predicted by Fitts' law (average r 2 = 0.82). Without vision, average grip force scaled accurately although force variability was insensitive to the target presented. In contrast, images of everyday objects generated more reliable grip forces without the visualized force meter. In sum, population means were well-described by Fitts' law for explicit targets with vision ( r 2 = 0.96) and implicit targets ( r 2 = 0.89), but not as well-described for explicit targets without vision ( r 2 = 0.54). Implicit targets should provide a realistic see-object-squeeze-object test using Fitts' law to quantify the relative speed-accuracy relationship of any given grasper.

A guide for statewide impaired-driving task forces.

DOT National Transportation Integrated Search

2009-09-01

The purpose of the guide is to assist State officials and other stakeholders who are interested in establishing an : Impaired-Driving Statewide Task Force or who are exploring ways to improve their current Task Force. The guide : addresses issues suc...

PRN 2007-3: The Agricultural Handlers Exposure Task Force, L.L.C

EPA Pesticide Factsheets

This PR Notice discusses the Agricultural Handlers Exposure Task Force, an industry-wide task force formed to develop mixer, loader, and applicator exposure data for pesticides used in agricultural settings. It includes contacts for more information.

78 FR 7415 - Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

... DEPARTMENT OF DEFENSE Office of the Secretary Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Members of the Armed Forces; Notice of... Committee meeting of the Department of Defense Task Force on the Care, Management, and Transition of...

78 FR 66902 - Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... DEPARTMENT OF DEFENSE Office of the Secretary Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Members of the Armed Forces; Notice of... Federal Advisory Committee meeting of the Department of Defense Task Force on the Care, Management, and...

77 FR 31337 - Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-25

... DEPARTMENT OF DEFENSE Office of the Secretary Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Members of the Armed Forces; Notice of... Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and...

76 FR 38118 - Meeting of the Department of Defense Task Force on the Care, Management, and Transition of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... DEPARTMENT OF DEFENSE Office of the Secretary Meeting of the Department of Defense Task Force on... Forces AGENCY: Department of Defense. ACTION: Meeting notice. SUMMARY: Under the provisions of the... that the following Federal Advisory Committee meeting of the Department of Defense Task Force on the...

78 FR 38015 - Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... DEPARTMENT OF DEFENSE Office of the Secretary Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded, Ill, and Injured Members of the Armed Forces; Notice of... of the Department of Defense Task Force on the Care, Management, and Transition of Recovering Wounded...

Load type influences motor unit recruitment in biceps brachii during a sustained contraction.

PubMed

Baudry, Stéphane; Rudroff, Thorsten; Pierpoint, Lauren A; Enoka, Roger M

2009-09-01

Twenty subjects participated in four experiments designed to compare time to task failure and motor-unit recruitment threshold during contractions sustained at 15% of maximum as the elbow flexor muscles either supported an inertial load (position task) or exerted an equivalent constant torque against a rigid restraint (force task). Subcutaneous branched bipolar electrodes were used to record single motor unit activity from the biceps brachii muscle during ramp contractions performed before and at 50 and 90% of the time to failure for the position task during both fatiguing contractions. The time to task failure was briefer for the position task than for the force task (P=0.0002). Thirty and 29 motor units were isolated during the force and position tasks, respectively. The recruitment threshold declined by 48 and 30% (P=0.0001) during the position task for motor units with an initial recruitment threshold below and above the target force, respectively, whereas no significant change in recruitment threshold was observed during the force task. Changes in recruitment threshold were associated with a decrease in the mean discharge rate (-16%), an increase in discharge rate variability (+40%), and a prolongation of the first two interspike intervals (+29 and +13%). These data indicate that there were faster changes in motor unit recruitment and rate coding during the position task than the force task despite a similar net muscle torque during both tasks. Moreover, the results suggest that the differential synaptic input observed during the position task influences most of the motor unit pool.

Task- and time-dependent modulation of Ia presynaptic inhibition during fatiguing contractions performed by humans

PubMed Central

Maerz, Adam H.; Gould, Jeffrey R.; Enoka, Roger M.

2011-01-01

Presynaptic modulation of Ia afferents converging onto the motor neuron pool of the extensor carpi radialis (ECR) was compared during contractions (20% of maximal force) sustained to failure as subjects controlled either the angular position of the wrist while supporting an inertial load (position task) or exerted an equivalent force against a rigid restraint (force task). Test Hoffmann (H) reflexes were evoked in the ECR by stimulating the radial nerve above the elbow. Conditioned H reflexes were obtained by stimulating either the median nerve above the elbow or at the wrist (palmar branch) to assess presynaptic inhibition of homonymous (D1 inhibition) and heteronymous Ia afferents (heteronymous Ia facilitation), respectively. The position task was briefer than the force task (P = 0.001), although the maximal voluntary force and electromyograph for ECR declined similarly at failure for both tasks. Changes in the amplitude of the conditioned H reflex were positively correlated between the two conditioning methods (P = 0.02) and differed between the two tasks (P < 0.05). The amplitude of the conditioned H reflex during the position task first increased (129 ± 20.5% of the initial value, P < 0.001) before returning to its initial value (P = 0.22), whereas it increased progressively during the force task to reach 122 ± 17.4% of the initial value at failure (P < 0.001). Moreover, changes in conditioned H reflexes were associated with the time to task failure and force fluctuations. The results suggest a task- and time-dependent modulation of presynaptic inhibition of Ia afferents during fatiguing contractions. PMID:21543747

77 FR 6786 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-09

... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration U.S. Coral Reef Task Force... of the U.S. Coral Reef Task Force. The meeting will be held in Washington, DC This meeting, the 27th [[Page 6787

First Responder Refresher: National Standard Curriculum (Instructor Course Guide)

DOT National Transportation Integrated Search

1997-07-08

This white paper provides a brief overview of the report titled "ITS Focus Task Force on System Architecture Report", dated May 1997. The report was prepared by a special task force of the United Kingdoms ITS Focus organization. This task force wa...

Repairing the Breach. Key Ways To Support Family Life, Reclaim Our Streets, and Rebuild Civil Society in America's Communities. Report of the National Task Force on African-American Men and Boys.

ERIC Educational Resources Information Center

Austin, Bobby William, Ed.

This report of the National Task Force on African-American Men and Boys is the beginning of an approach to repair society's breaches and restore the streets to safety. The Task Force, headed by Andrew J. Young and established in 1994, conceived its mission as one of reclamation. The Task Force made 61 specific recommendations, and three general…

Bidirectional transfer between joint and individual actions in a task of discrete force production.

PubMed

Masumoto, Junya; Inui, Nobuyuki

2017-07-01

The present study examined bidirectional learning transfer between joint and individual actions involving discrete isometric force production with the right index finger. To examine the effects of practice of joint action on performance of the individual action, participants performed a pre-test (individual condition), practice blocks (joint condition), and a post-test (individual condition) (IJI task). To examine the effects of practice of the individual action on performance during the joint action, the participants performed a pre-test (joint condition), practice blocks (individual condition), and a post-test (joint condition) (JIJ task). Whereas one participant made pressing movements with a target peak force of 10% maximum voluntary contraction (MVC) in the individual condition, two participants produced the target force of the sum of 10% MVC produced by each of them in the joint condition. In both the IJI and JIJ tasks, absolute errors and standard deviations of peak force were smaller post-test than pre-test, indicating bidirectional transfer between individual and joint conditions for force accuracy and variability. Although the negative correlation between forces produced by two participants (complementary force production) became stronger with practice blocks in the IJI task, there was no difference between the pre- and post-tests for the negative correlation in the JIJ task. In the JIJ task, the decrease in force accuracy and variability during the individual action did not facilitate complementary force production during the joint action. This indicates that practice performed by two people is essential for complementary force production in joint action.

77 FR 55218 - Homeland Security Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

... childhood arrivals program. The HSAC will also receive a report from the Sustainability and Efficiency Task Force, review and discuss the task forces' report, and formulate recommendations for the Department. The.... HSAC conference call details and the Sustainability and Efficiency Task Force report will be provided...

Task force on deterrence of air piracy : final report.

DOT National Transportation Integrated Search

1978-11-01

In February 1969, as the frequency of hijacking of U.S. air carrier aircraft was rising to an all-time high, the Federal Aviation Administration established a multi-disciplinary Task Force on Deterrence of Air Piracy. The work of the Task Force in de...

75 FR 16577 - Gulf War Veterans' Illnesses Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-01

... DEPARTMENT OF VETERANS AFFAIRS Gulf War Veterans' Illnesses Task Force AGENCY: Department of Veterans Affairs (VA). ACTION: Notice with request for comments. SUMMARY: The Secretary Department of Veterans Affairs (VA) established the Gulf War Veterans' Illnesses Task Force (GWVI-TF) in August 2009 to...

77 FR 18307 - Gulf War Veterans' Illnesses Task Force Report

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

... DEPARTMENT OF VETERANS AFFAIRS Gulf War Veterans' Illnesses Task Force Report AGENCY: Department of Veterans Affairs. ACTION: Notice. SUMMARY: The Secretary Department of Veterans Affairs (VA) established the Gulf War Veterans' Illnesses Task Force (GWVI-TF) in August 2009 to conduct a comprehensive...

78 FR 28292 - Gulf War Veterans' Illnesses Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-14

... DEPARTMENT OF VETERANS AFFAIRS Gulf War Veterans' Illnesses Task Force AGENCY: Department of Veterans Affairs (VA). ACTION: Notice with request for comments. SUMMARY: The Secretary, Department of Veterans Affairs (VA) established the Gulf War Veterans' Illnesses Task Force (GWVI-TF) in August 2009 to...

76 FR 65321 - Gulf War Veterans' Illnesses Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-20

... DEPARTMENT OF VETERANS AFFAIRS Gulf War Veterans' Illnesses Task Force AGENCY: Department of Veterans Affairs (VA). ACTION: Notice with request for comments. SUMMARY: The Secretary, Department of Veterans Affairs (VA) established the Gulf War Veterans' Illnesses Task Force (GWVI-TF) in August 2009 to...

78 FR 63208 - UPDATE-Meeting of the Community Preventive Services Task Force (Task Force)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

..., and issues recommendations. These recommendations provide evidence-based options from which decision makers in communities, companies, health departments, health plans and healthcare systems, non..., available resources, and constraints of their constituents. The Task Force's recommendations, along with the...

An introductory handbook for state task forces to combat drunk driving.

DOT National Transportation Integrated Search

1983-01-01

In June 1982 Governor Robb created a task force to identify and assess efforts under way in Virginia to address the problem of drunken driving and to make recommendations. This booklet was prepared to assist the task force in its deliberations.

Forced Aerobic Exercise Preceding Task Practice Improves Motor Recovery Poststroke.

PubMed

Linder, Susan M; Rosenfeldt, Anson B; Dey, Tanujit; Alberts, Jay L

To understand how two types of aerobic exercise affect upper-extremity motor recovery post-stroke. Our aims were to (1) evaluate the feasibility of having people who had a stroke complete an aerobic exercise intervention and (2) determine whether forced or voluntary exercise differentially facilitates upper-extremity recovery when paired with task practice. Seventeen participants with chronic stroke completed twenty-four 90-min sessions over 8 wk. Aerobic exercise was immediately followed by task practice. Participants were randomized to forced or voluntary aerobic exercise groups or to task practice only. Improvement on the Fugl-Meyer Assessment exceeded the minimal clinically important difference: 12.3, 4.8, and 4.4 for the forced exercise, voluntary exercise, and repetitive task practice-only groups, respectively. Only the forced exercise group exhibited a statistically significant improvement. People with chronic stroke can safely complete intensive aerobic exercise. Forced aerobic exercise may be optimal in facilitating motor recovery associated with task practice. Copyright © 2017 by the American Occupational Therapy Association, Inc.

Complex Tasks Force Hand Laterality and Technological Behaviour in Naturalistically Housed Chimpanzees: Inferences in Hominin Evolution

PubMed Central

Mosquera, M.; Geribàs, N.; Bargalló, A.; Llorente, M.; Riba, D.

2012-01-01

Clear hand laterality patterns in humans are widely accepted. However, humans only elicit a significant hand laterality pattern when performing complementary role differentiation (CRD) tasks. Meanwhile, hand laterality in chimpanzees is weaker and controversial. Here we have reevaluated our results on hand laterality in chimpanzees housed in naturalistic environments at Fundació Mona (Spain) and Chimfunshi Wild Orphanage (Zambia). Our results show that the difference between hand laterality in humans and chimpanzees is not as great as once thought. Furthermore, we found a link between hand laterality and task complexity and also an even more interesting connection: CRD tasks elicited not only the hand laterality but also the use of tools. This paper aims to turn attention to the importance of this threefold connection in human evolution: the link between CRD tasks, hand laterality, and tool use, which has important evolutionary implications that may explain the development of complex behaviour in early hominins. PMID:22550466

Complex tasks force hand laterality and technological behaviour in naturalistically housed chimpanzees: inferences in hominin evolution.

PubMed

Mosquera, M; Geribàs, N; Bargalló, A; Llorente, M; Riba, D

2012-01-01

Clear hand laterality patterns in humans are widely accepted. However, humans only elicit a significant hand laterality pattern when performing complementary role differentiation (CRD) tasks. Meanwhile, hand laterality in chimpanzees is weaker and controversial. Here we have reevaluated our results on hand laterality in chimpanzees housed in naturalistic environments at Fundació Mona (Spain) and Chimfunshi Wild Orphanage (Zambia). Our results show that the difference between hand laterality in humans and chimpanzees is not as great as once thought. Furthermore, we found a link between hand laterality and task complexity and also an even more interesting connection: CRD tasks elicited not only the hand laterality but also the use of tools. This paper aims to turn attention to the importance of this threefold connection in human evolution: the link between CRD tasks, hand laterality, and tool use, which has important evolutionary implications that may explain the development of complex behaviour in early hominins.

Response to Vogelstein: How the 2012 AAP Task Force on circumcision went wrong.

PubMed

Van Howe, Robert S

2018-01-01

Vogelstein cautions medical organizations against jumping into the fray of controversial issues, yet proffers the 2012 American Academy of Pediatrics' Task Force policy position on infant male circumcision as 'an appropriate use of position-statements.' Only a scratch below the surface of this policy statement uncovers the Task Force's failure to consider Vogelstein's many caveats. The Task Force supported the cultural practice by putting undeserved emphasis on questionable scientific data, while ignoring or underplaying the importance of valid contrary scientific data. Without any effort to quantitatively assess the risk/benefit balance, the Task Force concluded the benefits of circumcision outweighed the risks, while acknowledging that the incidence of risks was unknown. This Task Force differed from other Academy policy-forming panels by ignoring the Academy's standard quality measures and by not appointing members with extensive research experience, extensive publications, or recognized expertise directly related to this topic. Despite nearly 100 publications available at the time addressing the substantial ethical issues associated with infant male circumcision, the Task Force chose to ignore the ethical controversy. They merely stated, with minimal justification, the opinion of one of the Task Force members that the practice of infant male circumcision is morally permissible. The release of the report has fostered an explosion of academic discussion on the ethics of infant male circumcision with a number of national medical organizations now decrying the practice as a human rights violation. © 2017 John Wiley & Sons Ltd.

Task analysis of Air Force pharmacy practice.

PubMed

Bartholomew, A; Sawyer, W T; Coats, L

1995-01-15

The frequency with which United States Air Force pharmacists perform specific professional tasks and the pharmacists' views as to the importance of those tasks were studied. A questionnaire was prepared that asked recipients to rate each of 36 tasks selected as representing the spectrum of practice activities. There were four categories of tasks: managerial tasks, dispensing tasks, drug information tasks, and patient care tasks. Recipients rated the tasks with respect to frequency of performance and importance on separate 6-point scales. The questionnaire was mailed in May 1991 to the 225 pharmacists then serving in the Air Force worldwide. Of the 225 questionnaires, 150 usable questionnaires were returned (response rate, 67%). All the tasks in the survey were performed by at least one Air Force pharmacy officer, although the frequency of task performance varied. In particular, the frequency of many patient care tasks was low. All the tasks were perceived to have some importance, but drug information tasks were rated as being significantly more important than tasks in the other categories; patient care tasks were rated lowest in importance. The results varied with the respondents' demographic characteristics. Pharmacy officers with more years of service, more senior positions, higher rank, or an advanced degree in a field other than pharmacy tended to give responses that diverged from those of the population. A 1991 survey showed an awareness among Air Force pharmacists of the need to orient practice around patient care; however, they were not spending substantial time on patient care and tended to view it as less important than more traditional pharmacy tasks.

Grip force control in individuals with multiple sclerosis.

PubMed

Iyengar, Veena; Santos, Marcio J; Ko, Michael; Aruin, Alexander S

2009-10-01

Appropriate regulation of grip force is essential in performance of various activities of daily living such as drinking, eating, buttoning a shirt, and so on. The extent to which individuals with multiple sclerosis (MS) are able to regulate grip forces while performing elements of the activities of daily living is largely unknown. . To investigate how individuals with MS control grip force during performance of functional tasks. . This study evaluated the grip force control in selected individuals with MS (n = 9) and healthy control subjects (n = 9) while they performed the task of lifting and placing an instrumented object on a shelf and the task of lifting the object and bringing it close to the mouth to mimic drinking. The grip forces, object acceleration, force ratio, and time lag were recorded and analyzed. . The individuals with MS used significantly larger peak grip force and force ratio than control subjects while performing both tasks and for both hands. In addition, the time lag between the peaks of grip and load forces was significantly longer in individuals with MS. . The application of excessive grip force could predispose individuals with MS to additional fatigue and musculoskeletal overuse trauma. Rehabilitation protocols for the MS population may need to account for increased levels of grip force applied during the performance of functional tasks.

Exploring Operational Test and Evaluation of Unmanned Aircraft Systems: A Qualitative Case Study

NASA Astrophysics Data System (ADS)

Saliceti, Jose A.

The purpose of this qualitative case study was to explore and identify strategies that may potentially remedy operational test and evaluation procedures used to evaluate Unmanned Aircraft Systems (UAS) technology. The sample for analysis consisted of organizations testing and evaluating UASs (e.g., U.S. Air Force, U.S. Navy, U.S. Army, U.S. Marine Corps, U.S. Coast Guard, and Customs Border Protection). A purposeful sampling technique was used to select 15 subject matter experts in the field of operational test and evaluation of UASs. A questionnaire was provided to participants to construct a descriptive and robust research. Analysis of responses revealed themes related to each research question. Findings revealed operational testers utilized requirements documents to extrapolate measures for testing UAS technology and develop critical operational issues. The requirements documents were (a) developed without the contribution of stakeholders and operational testers, (b) developed with vague or unrealistic measures, and (c) developed without a systematic method to derive requirements from mission tasks. Four approaches are recommended to develop testable operational requirements and assist operational testers: (a) use a mission task analysis tool to derive requirements for mission essential tasks for the system, (b) exercise collaboration among stakeholders and testers to ensure testable operational requirements based on mission tasks, (c) ensure testable measures are used in requirements documents, and (d) create a repository list of critical operational issues by mission areas. The preparation of operational test and evaluation processes for UAS technology is not uniform across testers. The processes in place are not standardized, thus test plan preparation and reporting are different among participants. A standard method to prepare and report UAS technology should be used when preparing and reporting on UAS technology. Using a systematic process, such as mission-based test design, resonated among participants as an analytical method to link UAS mission tasks and measures of performance to the capabilities of the system under test when developing operational test plans. Further research should examine system engineering designs for system requirements traceability matrix of mission tasks and subtasks while using an analysis tool that adequately evaluates UASs with an acceptable level of confidence in the results.

76 FR 52932 - Notice of Meeting of the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Meeting of the Agricultural Air Quality Task Force AGENCY: Natural Resources Conservation Service (NRCS). ACTION: Notice of meeting. SUMMARY: The Agricultural Air Quality Task Force (AAQTF) will meet to continue discussions on...

Task Force on Emergency Evacuation of Transport Airplanes. Volume 2. Supporting Documentation.

DTIC Science & Technology

1986-07-01

P.O. Box 604 Trinidaa, West Indies Rick Cremer Acting Manager, Frederic Diamond Air Carrier Branch President Federal Aviation Apeiron Technology...Lynch Transport Canada Further, to insure the availability of trained personnel to provide leadership in the event of an accident of an aircraft having...66-26A. -3- conmmendably in achieving evacuations within reasonable times while providingy calm ana etfective leadership , It was found that escape

Impact of Advanced Avionics Technology on Ground Attack Weapon Systems.

DTIC Science & Technology

1982-02-01

as the relevant feature. 3.0 Problem The task is to perform the automatic cueing of moving objects in a natural environment . Additional problems...views on this subject to the American Defense Preparedness Association (ADPA) on 11 February 1981 in Orlando, Florida. ENVIRONMENTAL CONDITIONS OUR...the operating window or the environmental conditions of combat that our forces may encounter worldwide. The three areas selected were Europe, the

C2 of Space: The Key to Full Spectrum Dominance

DTIC Science & Technology

1999-01-01

created the Air Force Research Laboratory in 1997, AFRL/IF was tasked to provide Information Dominance technologies to the warfighter. These critical...allowing the future Battle Manager’s control of the battlespace. The first five ITTPs come under AFRL’s Information Dominance thrust area...time Sensor-to-Shooter, falls under the Precision Strike thrust area. This paper provides a brief background regarding Information Dominance and

Land Combat Systems

DTIC Science & Technology

2002-01-01

systems many key automation and robotic technologies necessary for the autonomous operations desired of future systems. GDLS is in charge of the AAAV...TITLE AND SUBTITLE 2002 Industry Studies: Land Combat Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6 . AUTHOR(S) 5d...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) The Industrial College of the Armed Forces

THE USE OF CHEMICALS IN THE FIELD OF FARM ANIMAL HEALTH (NUTRITION, ENTOMOLOGY, PATHOLOGY). AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 7.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF STATE STUDIES, THIS MODULE IS ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS. THE SPECIFIC OBJECTIVE OF THIS MODULE IS TO PREPARE TECHNICIANS IN THE FIELD OF THE USE OF CHEMICALS FOR ANIMAL HEALTH. SECTIONS INCLUDE -- (1)…

National Gas Survey report to the Federal Energy Regulatory Commission by the Supply-Technical Advisory Task Force on nonconventional natural gas resources. [Coal beds

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1978-06-01

An analysis is presented of the future energy situation in the U.S. with emphasis on the natural gas industry. The analysis results are presented in chapters on historical research efforts, industry criteria for commercialization of coal bed gas, technology for recovering methane from coal beds, identification of problems, legal concerns, and environmental considerations. (JRD)

Routing UAVs to Co-Optimize Mission Effectiveness and Network Performance with Dynamic Programming

DTIC Science & Technology

2011-03-01

Heuristics on Hexagonal Connected Dominating Sets to Model Routing Dissemination," in Communication Theory, Reliability, and Quality of Service (CTRQ...24] Matthew Capt. USAF Compton, Improving the Quality of Service and Security of Military Networks with a Network Tasking Order Process, 2010. [25...Wesley, 2006. [32] James Haught, "Adaptive Quality of Service Engine with Dynamic Queue Control," Air Force Institute of Technology, Wright

Using Symbolic TI Calculators in Engineering Mathematics: Sample Tasks and Reflections from a Decade of Practice

ERIC Educational Resources Information Center

Beaudin, Michel; Picard, Gilles

2010-01-01

Starting in September 1999, new students at ETS were required to own the TI-92 Plus or TI-89 symbolic calculator and since September 2002, the Voyage 200. Looking back at these ten years of working with a computer algebra system on every student's desk, one could ask whether the introduction of this hand-held technology has really forced teachers…

META II Complexity and Adaptability

DTIC Science & Technology

2011-08-01

NUMBER 62303E 6. AUTHOR( S ) Douglas Stuart and Raju Mattikalli 5d. PROJECT NUMBER DM30 5e. TASK NUMBER 01 5f. WORK UNIT NUMBER DM300104 7...PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION The Boeing Company Boeing Research and Technology P.O. Box 516 St...Louis, MO 63166-0516 REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME( S ) AND ADDRESS(ES) 10. SPONSORING/MONITORING Air Force Research

Modeling using discrete event simulation: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force--4.

PubMed

Karnon, Jonathan; Stahl, James; Brennan, Alan; Caro, J Jaime; Mar, Javier; Möller, Jörgen

2012-01-01

Discrete event simulation (DES) is a form of computer-based modeling that provides an intuitive and flexible approach to representing complex systems. It has been used in a wide range of health care applications. Most early applications involved analyses of systems with constrained resources, where the general aim was to improve the organization of delivered services. More recently, DES has increasingly been applied to evaluate specific technologies in the context of health technology assessment. The aim of this article was to provide consensus-based guidelines on the application of DES in a health care setting, covering the range of issues to which DES can be applied. The article works through the different stages of the modeling process: structural development, parameter estimation, model implementation, model analysis, and representation and reporting. For each stage, a brief description is provided, followed by consideration of issues that are of particular relevance to the application of DES in a health care setting. Each section contains a number of best practice recommendations that were iterated among the authors, as well as among the wider modeling task force. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Using grasping tasks to evaluate hand force coordination in children with hemiplegic cerebral palsy.

PubMed

Mackenzie, Samuel J; Getchell, Nancy; Modlesky, Christopher M; Miller, Freeman; Jaric, Slobodan

2009-08-01

Mackenzie SJ, Getchell N, Modlesky CM, Miller F, Jaric S. Using grasping tasks to evaluate hand force coordination in children with hemiplegic cerebral palsy. To assess force coordination in children with hemiplegic cerebral palsy (CP) using a device that allows for testing both unimanual and bimanual manipulation tasks performed under static and dynamic conditions. Nonequivalent groups design. University research laboratory for motor control. Six children with hemiplegic CP (age, mean +/- SD, 11.6+/-1.8 y) and 6 typically developing controls (11.6+/-1.6 y). Not applicable. Children performed simple lifting and force-matching static ramp tasks by way of both unimanual and bimanual pulling using a device that measures grip force (force acting perpendicularly at the digits-device contact area) and load force (tangential force). Main outcome measures were grip/load force ratios (grip force scaling) and correlation coefficients (force coupling). CP subjects showed significantly higher grip/load force ratios (P<.05) and slightly lower correlation coefficients than the control group, with more pronounced differences for most tasks when using their involved hand. For subjects with CP, switching from unimanual to bimanual conditions did not bring changes in scaling or coupling for the involved hand (P>.05). Compared with healthy children, the impaired hand function in the hemiplegic CP pediatric population could be reflected in excessive grip force that is also decoupled from ongoing changes in load force. Therefore, the bimanual grip load device used in this study could provide a sensitive measure of grip force coordination in CP, although nonmotor deficits should be taken into account when asking children to perform more complex tasks.

77 FR 3241 - Intent To Hold North Dakota Task Force Meeting as Established by the Missouri River Protection...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-23

... duties of the Task Force are to prepare and approve a plan for the use of the funds made available under... of the Task Force are to prepare and approve a plan for the use of the funds made available under... Force Meeting as Established by the Missouri River Protection and Improvement Act of 2000 (Title VII...

Investigating gender differences under conditions of fatigue in a simulated high G aerial combat environment.

PubMed

Chelette, T L

1997-06-01

Advances in technology have equipped high-performance combat aircraft with the capability of delivering higher and higher sustained acceleration or G-forces on the pilots flying them. While the physiological effects of increased g-forces on the human body continue to be investigated, studies examining the effects of acceleration on the cognitive abilities of high-performance aircraft pilots remain sparse. Additionally, as higher technology is making its way into the cockpit, so are female pilots. With even fewer studies investigating women's physiological and cognitive tolerances to the stressors in the high-performance cockpit and flight environment, Dr. Chelette's study aimed to investigate these issues. Examining pilot workload, flight task abilities, and the effects of sleeplessness on both male and female pilots, Dr. Chelette's results revealed findings that will make their way into the high-performance cockpit of the future.

[The standardization of medical care and the training of medical personnel].

PubMed

Korbut, V B; Tyts, V V; Boĭshenko, V A

1997-09-01

The medical specialist training at all levels (medical orderly, doctor's assistant, general practitioner, doctors) should be based on the medical care standards. Preliminary studies in the field of military medicine standards have demonstrated that the medical service of the Armed Forces of Russia needs medical resources' standards, structure and organization standards, technology standards. Military medical service resources' standards should reflect the requisitions for: all medical specialists' qualification, equipment and material for medical set-ups, field medical systems, drugs, etc. Standards for structures and organization should include requisitions for: command and control systems in military formations' and task forces' medical services and their information support; health-care and evacuation functions, sanitary control and anti-epidemic measures and personnel health protection. Technology standards development could improve and regulate the health care procedures in the process of evacuation. Standards' development will help to solve the problem of the data-base for the military medicine education system and medical research.

75 FR 33838 - NASA Advisory Council; Ad-Hoc Task Force on Planetary Defense; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-15

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-065)] NASA Advisory Council; Ad-Hoc Task Force on Planetary Defense; Meeting AGENCY: National Aeronautics and Space Administration. ACTION... amended, the National Aeronautics and Space Administration announces a meeting of the Ad-Hoc Task Force on...

75 FR 15742 - NASA Advisory Council; Ad-Hoc Task Force on Planetary Defense; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (10-035)] NASA Advisory Council; Ad-Hoc Task Force on Planetary Defense; Meeting AGENCY: National Aeronautics and Space Administration. ACTION... amended, the National Aeronautics and Space Administration announces a meeting of the Ad-Hoc Task Force on...

Honeywell's Working Parents Task Force. Final Report and Recommendations.

ERIC Educational Resources Information Center

Honeywell, Inc., Minneapolis, Minn.

This publication provides a summary of the Honeywell Working Parent Task Force's recommendations on how to solve problems experienced by working parents. The Task Force consisted of three committees: the Employment Practices Committee (EPC); the Parent Education Committee (PEC); and the Child Care Facilities Committee (CCFC). After examining a…

77 FR 71471 - Interagency Task Force on Veterans Small Business Development; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-30

... SMALL BUSINESS ADMINISTRATION Interagency Task Force on Veterans Small Business Development; Notice of Meeting AGENCY: U.S. Small Business Administration. ACTION: Notice of open Federal Interagency... agenda for its public meeting of the Interagency Task Force on Veterans Small Business Development. The...

75 FR 34439 - Defense Science Board Task Force on Nuclear Treaty Monitoring and Verification

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-17

... DEPARTMENT OF DEFENSE Office of the Secretary Defense Science Board Task Force on Nuclear Treaty... meetings. SUMMARY: The Defense Science Board Task Force on Nuclear Treaty Monitoring and Verification will... Applications International Corporation, 4001 North Fairfax Drive, Suite 300, Arlington, VA. FOR FURTHER...

76 FR 70913 - Retrospective Review Under Executive Order 13579

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... Fukushima Task Force Report. DATES: November 16, 2011. ADDRESSES: You can access publicly available... Enhancing Reactor Safety in the 21st Century: The Near-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident'' (Fukushima Task Force Report, ML111861807), was issued. The Commission has...

76 FR 55394 - Meeting of the Task Force on Community Preventive Services

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the...), Department of Health and Human Services (HHS). ACTION: Notice of meeting. SUMMARY: The Centers for Disease... (Task Force). The Task Force--an independent, nonfederal body of nationally known leaders in public...

76 FR 4115 - Meeting of the Task Force on Community Preventive Services

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the...), Department of Health and Human Services (HHS). ACTION: Notice of meeting. SUMMARY: The Centers for Disease... (Task Force). The Task Force--an independent, nonfederal body of nationally known leaders in public...

75 FR 63846 - Meeting of the Task Force on Community Preventive Services

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Meeting of the...), Department of Health and Human Services (HHS). ACTION: Notice of meeting. SUMMARY: The Centers for Disease... (Task Force). The Task Force is an independent, nonfederal body of nationally known leaders in public...

75 FR 48929 - Notice of Meeting of the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-12

... Agricultural Air Quality Task Force AGENCY: Natural Resources Conservation Service (NRCS), United States... Triangle Park, North Carolina 27711; (919) 541-5400. The Agricultural Air Quality Task Force (AAQTF) will meet to continue discussions on air quality issues relating to agriculture. Additionally, the Livestock...

NASA replanning efforts continue

NASA Astrophysics Data System (ADS)

Katzoff, Judith A.

A task force of the National Aeronautics and Space Administration (NASA) is producing new launch schedules for NASA's three remaining space shuttle orbiters, possibly supplemented by expendable launch vehicles. In the wake of the explosion of the space shuttle Challenger on January 28, 1986, the task force is assuming a delay of 12-18 months before resumption of shuttle flights.NASA's Headquarters Replanning Task Force, which meets daily, is separate from the agency's Data and Design Analysis Task Force, which collects and analyzes information about the accident for the use of the investigative commission appointed by President Ronald Reagan.

Report of NASA Lunar Energy Enterprise Case Study Task Force

NASA Technical Reports Server (NTRS)

Kearney, John J.

1989-01-01

The Lunar Energy Enterprise Case Study Task Force was asked to determine the economic viability and commercial potential of mining and extracting He-3 from the lunar soil, and transporting the material to Earth for use in a power-generating fusion reactor. Two other space energy projects, the Space Power Station (SPS) and the Lunar Power Station (LPS), were also reviewed because of several interrelated aspects of these projects. The specific findings of the Task Force are presented. Appendices contain related papers generated by individual Task Force Members.

14th International Congress on Antiphospholipid Antibodies Task Force Report on Catastrophic Antiphospholipid Syndrome.

PubMed

Cervera, Ricard; Rodríguez-Pintó, Ignasi; Colafrancesco, Serena; Conti, Fabrizio; Valesini, Guido; Rosário, Cristina; Agmon-Levin, Nancy; Shoenfeld, Yehuda; Ferrão, Claudia; Faria, Raquel; Vasconcelos, Carlos; Signorelli, Flavio; Espinosa, Gerard

2014-07-01

The 'Task Force on Catastrophic Antiphospholipid Syndrome (CAPS)' was developed on the occasion of the 14th International Congress on Antiphospholipid Antibodies. The objectives of this Task Force were to assess the current knowledge on pathogenesis, clinical and laboratory features, diagnosis and classification, precipitating factors and treatment of this condition in order to address recommendations for future research. This article summarizes the studies analyzed by the Task Force, its recommendations and the future research agenda. Copyright © 2014 Elsevier B.V. All rights reserved.

Fitts’ Law in the Control of Isometric Grip Force With Naturalistic Targets

PubMed Central

Thumser, Zachary C.; Slifkin, Andrew B.; Beckler, Dylan T.; Marasco, Paul D.

2018-01-01

Fitts’ law models the relationship between amplitude, precision, and speed of rapid movements. It is widely used to quantify performance in pointing tasks, study human-computer interaction, and generally to understand perceptual-motor information processes, including research to model performance in isometric force production tasks. Applying Fitts’ law to an isometric grip force task would allow for quantifying grasp performance in rehabilitative medicine and may aid research on prosthetic control and design. We examined whether Fitts’ law would hold when participants attempted to accurately produce their intended force output while grasping a manipulandum when presented with images of various everyday objects (we termed this the implicit task). Although our main interest was the implicit task, to benchmark it and establish validity, we examined performance against a more standard visual feedback condition via a digital force-feedback meter on a video monitor (explicit task). Next, we progressed from visual force feedback with force meter targets to the same targets without visual force feedback (operating largely on feedforward control with tactile feedback). This provided an opportunity to see if Fitts’ law would hold without vision, and allowed us to progress toward the more naturalistic implicit task (which does not include visual feedback). Finally, we changed the nature of the targets from requiring explicit force values presented as arrows on a force-feedback meter (explicit targets) to the more naturalistic and intuitive target forces implied by images of objects (implicit targets). With visual force feedback the relation between task difficulty and the time to produce the target grip force was predicted by Fitts’ law (average r2 = 0.82). Without vision, average grip force scaled accurately although force variability was insensitive to the target presented. In contrast, images of everyday objects generated more reliable grip forces without the visualized force meter. In sum, population means were well-described by Fitts’ law for explicit targets with vision (r2 = 0.96) and implicit targets (r2 = 0.89), but not as well-described for explicit targets without vision (r2 = 0.54). Implicit targets should provide a realistic see-object-squeeze-object test using Fitts’ law to quantify the relative speed-accuracy relationship of any given grasper. PMID:29773999

Report of the ASHP Task Force on Caring for Patients Served by Specialty Suppliers.

PubMed

Caselnova, Dominick; Donley, Kathy; Ehlers, Diane; Hyduk, Amy E; Koontz, Susannah E; Nowobilski-Vasilios, Anna; Pawlicki, Kathleen S; Poikonen, John C; Poremba, Art C; Sasser, Cathy L; Schell, Kenneth H; Schwab, Jay L; Swinarski, Dave; Chen, David; Kirschenbaum, Bonnie; Armitstead, John

2010-10-01

Task Force recommendations are discussed in more detail in eAppendix A (available at www.ajhp.org). What follows is a brief summary of those recommendations. In very abbreviated terms, the Task Force suggested that ASHP: 1. Consider creating and maintaining a Web resource center on ASHP's website to provide information about restricted drug distributions systems (RDDSs), risk evaluation and mitigation strategies (REMSs), risk assessment and minimization plans (RiskMAPs), and specialty suppliers and products. 2. Provide comprehensive education to members, other health professionals, regulators, third-party payers, patients, and other stakeholders about RDDSs, REMSs, RiskMAPs, and specialty suppliers and products. 3. Develop policies to advocate that a. Pharmacists serve as the institutional leaders in compliance and utilization challenges of safely managing externally supplied medications and related drug administration devices, b. Agencies, organizations, and associations that influence the distribution, sale, and dispensing of medications under these alternative distribution models address issues these models create in continuity of care, reimbursement, and patient safety, c. The Centers for Medicare and Medicaid Services and the Joint Commission develop standards and interpretations that accommodate hospital use of these products and devices when currently available technology (e.g., cold-chain storage, e-pedigree) is used to ensure patient safety, d. Group purchasing organizations negotiate contractual arrangements for specialty pharmaceuticals for both acquisition costs and distribution arrangements, and e. Information technology (IT) be used to resolve issues created by alternative distribution models and that ASHP work with IT vendors to ensure that programs are designed to meet the needs of these evolving models. 4. Quantify through research, perhaps in cooperation with entities such as the Agency for Healthcare Research and Quality, the Institute of Medicine, and the Institute for Safe Medication Practices, the impact of alternative distribution models on financial, safety, clinical, and humanistic patient outcomes. 5. Develop multidisciplinary tools and best practices that assist health care practitioners address the challenges created by alternative distribution models, from patient intake and referral to hospital discharge.

Covert face recognition in congenital prosopagnosia: a group study.

PubMed

Rivolta, Davide; Palermo, Romina; Schmalzl, Laura; Coltheart, Max

2012-03-01

Even though people with congenital prosopagnosia (CP) never develop a normal ability to "overtly" recognize faces, some individuals show indices of "covert" (or implicit) face recognition. The aim of this study was to demonstrate covert face recognition in CP when participants could not overtly recognize the faces. Eleven people with CP completed three tasks assessing their overt face recognition ability, and three tasks assessing their "covert" face recognition: a Forced choice familiarity task, a Forced choice cued task, and a Priming task. Evidence of covert recognition was observed with the Forced choice familiarity task, but not the Priming task. In addition, we propose that the Forced choice cued task does not measure covert processing as such, but instead "provoked-overt" recognition. Our study clearly shows that people with CP demonstrate covert recognition for faces that they cannot overtly recognize, and that behavioural tasks vary in their sensitivity to detect covert recognition in CP. Copyright © 2011 Elsevier Srl. All rights reserved.

Report of the Fermilab ILC Citizens' Task Force

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Fermi National Accelerator Laboratory convened the ILC Citizens' Task Force to provide guidance and advice to the laboratory to ensure that community concerns and ideas are included in all public aspects of planning and design for a proposed future accelerator, the International Linear Collider. In this report, the members of the Task Force describe the process they used to gather and analyze information on all aspects of the proposed accelerator and its potential location at Fermilab in northern Illinois. They present the conclusions and recommendations they reached as a result of the learning process and their subsequent discussions and deliberations.more » While the Task Force was charged to provide guidance on the ILC, it became clear during the process that the high cost of the proposed accelerator made a near-term start for the project at Fermilab unlikely. Nevertheless, based on a year of extensive learning and dialogue, the Task Force developed a series of recommendations for Fermilab to consider as the laboratory develops all successor projects to the Tevatron. The Task Force recognizes that bringing a next-generation particle physics project to Fermilab will require both a large international effort and the support of the local community. While the Task Force developed its recommendations in response to the parameters of a future ILC, the principles they set forth apply directly to any large project that may be conceived at Fermilab, or at other laboratories, in the future. With this report, the Task Force fulfills its task of guiding Fermilab from the perspective of the local community on how to move forward with a large-scale project while building positive relationships with surrounding communities. The report summarizes the benefits, concerns and potential impacts of bringing a large-scale scientific project to northern Illinois.« less

Department of Defense Tri-Service Precision Machine-Tool Program. Quarterly report, February--April 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-06-01

Following a planning period during which the Lawrence Livermore Laboratory and the Department of Defense managing sponsor, the USAF Materials Laboratory, agreed on work statements, the Department of Defense Tri-Service Precision Machine-Tool Program began in February 1978. Milestones scheduled for the first quarter have been met. Tasks and manpower requirements for two basic projects, precision-machining commercialization (PMC) and a machine-tool task force (MTTF), were defined. Progress by PMC includes: (1) documentation of existing precision machine-tool technology by initiation and compilation of a bibliography containing several hundred entries: (2) identification of the problems and needs of precision turning-machine builders and ofmore » precision turning-machine users interested in developing high-precision machining capability; and (3) organization of the schedule and content of the first seminar, to be held in October 1978, which will bring together representatives from the machine-tool and optics communities to address the problems and begin the process of high-precision machining commercialization. Progress by MTTF includes: (1) planning for the organization of a team effort of approximately 60 to 80 international experts to contribute in various ways to project objectives, namely, to summarize state-of-the-art cutting-machine-tool technology and to identify areas where future R and D should prove technically and economically profitable; (2) preparation of a comprehensive plan to achieve those objectives; and (3) preliminary arrangements for a plenary session, also in October, when the task force will meet to formalize the details for implementing the plan.« less

Specialty Task Force: A Strategic Component to Electronic Health Record (EHR) Optimization.

PubMed

Romero, Mary Rachel; Staub, Allison

2016-01-01

Post-implementation stage comes after an electronic health record (EHR) deployment. Analyst and end users deal with the reality that some of the concepts and designs initially planned and created may not be complementary to the workflow; creating anxiety, dissatisfaction, and failure with early adoption of system. Problems encountered during deployment are numerous and can vary from simple to complex. Redundant ticket submission creates backlog for Information Technology personnel resulting in delays in resolving concerns with EHR system. The process of optimization allows for evaluation of system and reassessment of users' needs. A solid and well executed optimization infrastructure can help minimize unexpected end-user disruptions and help tailor the system to meet regulatory agency goals and practice standards. A well device plan to resolve problems during post implementation is necessary for cost containment and to streamline communication efforts. Creating a specialty specific collaborative task force is efficacious and expedites resolution of users' concerns through a more structured process.

Increased reaction times and reduced response preparation already starts at middle age

PubMed Central

Wolkorte, Ria; Kamphuis, Janine; Zijdewind, Inge

2014-01-01

Generalized slowing characterizes aging and there is some evidence to suggest that this slowing already starts at midlife. This study aims to assess reaction time changes while performing a concurrent low-force and high-force motor task in young and middle-aged subjects. The high-force motor task is designed to induce muscle fatigue and thereby progressively increase the attentional demands. Twenty-five young (20–30 years, 12 males) and 16 middle-aged (35–55 years, 9 males) adults performed an auditory two-choice reaction time task (CRT) with and without a concurrent low- or high-force motor task. The CRT required subjects to respond to two different stimuli that occurred with a probability of 70 or 30%. The motor task consisted of index finger abduction, at either 10% (10%-dual-task) or 30% (30%-dual-task) of maximal voluntary force. Cognitive task performance was measured as percentage of correct responses and reaction times. Middle-aged subjects responded slower on the frequent but more accurately on the infrequent stimuli of CRT than young subjects. Both young and middle-aged subjects showed increased errors and reaction times while performing under dual-task conditions and both outcome measures increased further under fatiguing conditions. Only under 30%-dual-task demands, an age-effect on dual-task performance was present. Both single- and dual-task conditions showed that already at mid-life response preparation is seriously declined and that subjects implement different strategies to perform a CRT task. PMID:24808862

APA Summit on Medical Student Education Task Force on Informatics and Technology: learning about computers and applying computer technology to education and practice.

PubMed

Hilty, Donald M; Hales, Deborah J; Briscoe, Greg; Benjamin, Sheldon; Boland, Robert J; Luo, John S; Chan, Carlyle H; Kennedy, Robert S; Karlinsky, Harry; Gordon, Daniel B; Yager, Joel; Yellowlees, Peter M

2006-01-01

This article provides a brief overview of important issues for educators regarding medical education and technology. The literature describes key concepts, prototypical technology tools, and model programs. A work group of psychiatric educators was convened three times by phone conference to discuss the literature. Findings were presented to and input was received from the 2005 Summit on Medical Student Education by APA and the American Directors of Medical Student Education in Psychiatry. Knowledge of, skills in, and attitudes toward medical informatics are important to life-long learning and modern medical practice. A needs assessment is a starting place, since student, faculty, institution, and societal factors bear consideration. Technology needs to "fit" into a curriculum in order to facilitate learning and teaching. Learning about computers and applying computer technology to education and clinical care are key steps in computer literacy for physicians.

TASK FORCE REPORT ON ASSESSMENT AND EVALUATION.

ERIC Educational Resources Information Center

MORRIS, ROBERT

THE TASK FORCE ON ASSESSMENT AND EVALUATION HAS BEEN CHARGED TO RECOMMEND THE MOST EFFECTIVE MEANS FOR ASSESSING AND EVALUATING THE SHORT-TERM ACTIVITIES AND THE LONG-TERM ACHIEVEMENTS OF ACTION FOR BOSTON COMMUNITY DEVELOPMENT. THE GENERAL OBJECTIVES OF THE TASK FORCE ARE--THE ANALYSIS OF DATA RELEVANT FOR EVALUATING DAY-BY-DAY DECISION-MAKING,…

Inter-Association Task Force Report on Image.

ERIC Educational Resources Information Center

Special Libraries Association, Washington, DC.

In 1988, the Board of Directors of the Special Libraries Association provided funding to a task force to gather data which would determine how certain segments of society perceive librarians, how librarians view themselves and their colleagues, and to provide recommendations for addressing the issue of image. The task force project consisted of…

Report of the Social Studies Task Force.

ERIC Educational Resources Information Center

Gathman, John; And Others

In 1982 the Colorado Board of Education directed the State Board of Education to organize task forces to address a variety of state educational needs. This report, presented by the Social Studies Task Force, explains the group's purposes and concerns, provides a social studies definition, and outlines the Colorado grades K-12 social studies…

Human Health Effects, Task Force Assessment, Preliminary Report.

ERIC Educational Resources Information Center

Aronow, Wilbert S.; And Others

Presented in this preliminary report is one of seven assessments conducted by a special task force of Project Clean Air, the Human Health Effects Task Force. The reports summarize assessments of the state of knowledge on various air pollution problems, particularly in California, and make tentative recommendations as to what the University of…

Report of the Task Force on School Health.

ERIC Educational Resources Information Center

Maryland State Dept. of Health and Mental Hygiene, Baltimore.

The 1990 Report of the Task Force on School Health examines the current status of Maryland's school health programs and proposes 16 recommendations designed to implement a comprehensive school health (CSH) program to meet the needs of all students. The report describes the Task Force, which was appointed in 1989. After presenting a background on…

A Status Report from the Task Force on Marketing Research.

ERIC Educational Resources Information Center

Keim, William A.; And Others

Concerned with changes in enrollment and credit hour patterns, the chancellor of the Kansas City Metropolitan Community Colleges (MCC) created a special Task Force to consider recommendations for marketing strategies for the 1978-79 academic year. The Task Force reviewed regional and district demography, area population trends and density, age and…

Task Force on Education Funding Equity, Accountability, and Partnerships. Final Report.

ERIC Educational Resources Information Center

Maryland State Dept. of Legislative Services, Annapolis.

In 1997, Maryland formed the Task Force on Education Funding Equity, Accountability, and Partnerships. The group made a comprehensive review of education funding and programs in grades K-12 to ensure that students throughout Maryland have an equal opportunity for academic success. The task force's final report features the membership roster, the…

75 FR 43943 - Defense Science Board; Task Force on Nuclear Treaty Monitoring and Verification

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

... DEPARTMENT OF DEFENSE Office of the Secretary Defense Science Board; Task Force on Nuclear Treaty... meetings. SUMMARY: The Defense Science Board Task Force on Nuclear Treaty Monitoring and Verification will... held September 13-14, and 25-26, 2010. ADDRESSES: The meetings will be held at Science Applications...

76 FR 69296 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

... Adoption of Technical Specifications Task Force Traveler TSTF-500, Revision 2, ``DC Electrical Rewrite... Technical Specifications Task Force (TSTF) Traveler TSTF-500, Revision 2, ``DC Electrical Rewrite--Update to... Reactor Systems Engineer, Technical Specifications Branch, Mail Stop: O-7 C2A, Division of Inspection and...

28 CFR 16.105 - Exemption of Foreign Terrorist Tracking Task Force System.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Exemption of Foreign Terrorist Tracking Task Force System. 16.105 Section 16.105 Judicial Administration DEPARTMENT OF JUSTICE PRODUCTION OR... of Foreign Terrorist Tracking Task Force System. (a) The following system of records is exempt from 5...

26 CFR 54.9815-2713T - Coverage of preventive health services (temporary).

Code of Federal Regulations, 2011 CFR

2011-04-01

... the current recommendations of the United States Preventive Services Task Force with respect to the... States Preventive Services Task Force with respect to the individual. The provider bills the plan for an... A or B in the current recommendations of the United States Preventive Services Task Force with...

National Task Force on Student Aid Problems. Final Report.

ERIC Educational Resources Information Center

1975

This document presents a full discussion of the activities, findings, and recommendations of the National Task Force on Student Aid Problems. The task force was a voluntary association of concerned and interested agencies and organizations. Its only standing came from the support of those directly concerned with student aid problems. By design and…

Task Force on Education Funding Equity, Accountability, and Partnerships. Preliminary Report.

ERIC Educational Resources Information Center

Maryland State Dept. of Legislative Services, Annapolis.

In 1997, Maryland formed the Task Force on Education Funding Equity, Accountability, and Partnerships to ensure that students throughout Maryland have an equal opportunity for academic success. The Task Force's preliminary report features a comprehensive review of education funding and programs in grades K-12. The report presents membership and…

78 FR 44034 - Petition for Rulemaking Submitted by the Natural Resources Defense Council, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

... the Fukushima Dai-ichi Accident,'' (Fukushima Task Force Report, ADAMS Accession No. ML111861807..., pages 43-46, of the Fukushima Task Force Report, which discusses the enhancement of spent fuel pool... Commission was still in the process of reviewing the Fukushima Task Force Report, and the NRC did not...

Initial Report of the Task Force on Cultural Competence Education in the Health Sciences

ERIC Educational Resources Information Center

New Mexico Higher Education Department, 2007

2007-01-01

This report summarizes the findings and recommendations of the Task Force on Cultural Competence Education and represents the distillation of the Task Force's efforts to fulfill its legislative charge. The report is intended to facilitate a statewide conversation about the health services provided to New Mexico's multicultural citizenry. It…

75 FR 30002 - Federal Advisory Committee; Defense Task Force on Sexual Assault in the Military Services

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-28

... DEPARTMENT OF DEFENSE Office of the Secretary Federal Advisory Committee; Defense Task Force on Sexual Assault in the Military Services AGENCY: Department of Defense (DoD). ACTION: Termination of... Department of Defense gives notice that it is terminating the Defense Task Force on Sexual Assault in the...

The Washington State Task Force on Student Transportation Safety. Final Report.

ERIC Educational Resources Information Center

Washington State Legislature, Olympia.

Findings of a study conducted by the Washington State Task Force on Student Transportation Safety are presented in this report. The data-collection process involved four phases: meetings with experts in student transportation and pedestrian safety; public meetings, informational work sessions, and tours of problems areas; task force meetings; and…

Youth Employment. Final Recommendations of the State Superintendent's Task Force.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

This report contains the final recommendations of the task force on youth employment for the state of Wisconsin. The task force was specifically charged with studying issues related to working teenagers, reviewing existing laws and regulations on child labor, and developing recommendations to ensure that when teenagers work, their jobs do not…

78 FR 10636 - Task Force on Research on Violence Against American Indian and Alaska Native Women; Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-14

... DEPARTMENT OF JUSTICE Task Force on Research on Violence Against American Indian and Alaska Native Women; Meeting AGENCY: Office on Violence Against Women, United States Department of Justice. ACTION... public meeting of the Task Force on Research on Violence Against American Indian and Alaska Native Women...

32 CFR 700.1053 - Commander of a task force.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 5 2011-07-01 2011-07-01 false Commander of a task force. 700.1053 Section 700.1053 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1053 Commander of a task force. (a) A geographic fleet commander, and any...

32 CFR 700.1053 - Commander of a task force.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 5 2012-07-01 2012-07-01 false Commander of a task force. 700.1053 Section 700.1053 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1053 Commander of a task force. (a) A geographic fleet commander, and any...

32 CFR 700.1053 - Commander of a task force.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 5 2013-07-01 2013-07-01 false Commander of a task force. 700.1053 Section 700.1053 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY UNITED STATES NAVY... Command Detail to Duty § 700.1053 Commander of a task force. (a) A geographic fleet commander, and any...

77 FR 59627 - Homeland Security Advisory Council

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... purpose of reviewing and deliberating on recommendations by the HSAC's Cyber Skills Task Force. DATES: The.... The HSAC will meet to review and deliberate on the Cyber Skills Task Force report of findings and... details and the Cyber Skills Task Force report will be provided to interested members of the public at the...

Report of the Task Force on Declining Enrollment. Third Revision.

ERIC Educational Resources Information Center

Highline Public Schools, Seattle, WA.

The purpose of this task force was to study the program, facilities, and alternatives of the Highline School District as they relate to enrollment decline. Specifically, the task force was to establish criteria for identifying facilities where changes should be considered; identify and prioritize alternatives for use of excess classroom space; and…

77 FR 1913 - Notice of Meeting of the Agricultural Air Quality Task Force

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-12

... Conservation Service Notice of Meeting of the Agricultural Air Quality Task Force AGENCY: Natural Resources...), Agricultural Air Quality Task Force (AAQTF) will meet to continue discussions on critical air quality issues... relationship between agricultural production and air quality. The meeting is open to the public, and a draft...

Modeling the effects of multicontextual physics instruction on learner expectations and understanding of force and motion systems

NASA Astrophysics Data System (ADS)

Deese Becht, Sara-Maria Francis

1999-11-01

The purpose of this study is two-fold involving both practical and theoretical modeling components. The practical component, an experiential-learning phase, investigated a study population for effects that increasing levels of multicontextual physics activities have on student understanding of Newtonian systems of motion. This contextual-learning model measured learner convictions and non-response gaps and analyzed learner response trends on context, technology, challenge, growth, and success. The theoretical component, a model-building phase, designed a dynamic-knowing model for learning along a range of experiential tasks, from low to high context, monitored for indicators of learning in science and mathematics: learner academic performance and ability, learner control and academic attitude, and a learner non- response gap. This knowing model characterized a learner's process-of-knowing on a less to more expert- like learner-response continuum using performance and perspective indices associated with level of contextual- imagery referent system. Data for the contextual-learning model were collected on 180 secondary subjects: 72 middle and 108 high, with 36 physics subjects as local experts. Subjects were randomly assigned to one of three experimental groups differing only on context level of force and motion activities. Three levels of information were presented through context-based tasks: momentum constancy as inertia, momentum change as impulse, and momentum rate of change as force. The statistical analysis used a multi-level factorial design with repeated measures and discriminate analysis of response-conviction items. Subject grouping criteria included school level, ability level in science and mathematics, gender and race. Assessment criteria used pre/post performance scores, confidence level in physics concepts held, and attitude towards science, mathematics, and technology. Learner indices were computed from logit- transforms applied to learner outcomes and to study control and prediction criteria parameters. Findings suggest learner success rates vary with multicontextual experience level. When controlling for context, learner success seems to depend on technology level of assessment tool, learner attitude toward technology learning tools, learner attitude toward science and mathematics, and challenge level of force and motion problems. A learner non-response gap seems important when monitoring learner conviction. Application of the knowing model to the study population pictures learners on a journey towards success referenced to a local expert response.

Fifth Report of the NASA Advisory Council Task Force on the Shuttle-Mir Rendezvous and Docking Missions

NASA Technical Reports Server (NTRS)

1995-01-01

The NASA Advisory Council Task Force on the Shuttle-Mir rendezvous and docking missions examine a number of specific issues related to the Shuttle-Mir program. Three teams composed of Task Force members and technical advisors were formed to address the follow issues: preliminary results from STS-71 and the status of preparations for STS-74; NASA's presence in Russia; and NASA's automated data processing and telecommunications (ADP/T) infrastructure in Russia. The three review team reports have been included in the fifth report of the Task Force.

Enhanced Training by a Systemic Governance of Force Capabilities, Tasks, and Processes

DTIC Science & Technology

2013-06-01

18th ICCRTS “C2 in Underdeveloped, Degraded and Denied Operational Environments” Enhanced Training by a Systemic Governance of Force Capabilities...TITLE AND SUBTITLE Enhanced Training by a Systemic Governance of Force Capabilities, Tasks, and Processes 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c...assess, evaluate and accredit the Swedish forces. This paper presents a Systemic Governance of Capabilities, Tasks, and Processes applied to the

Joint U.S. Defense Science Board, UK Defence Scientific Advisory Council Task Force on Defense Critical Technologies

DTIC Science & Technology

2006-03-01

electrons (e.g., betavoltaics ) in a compact package is emerging as a possible new high energy density power source. Proliferation is not an issue...10 13 10 12 10 11 10 10 10 9 10 8 10 7 10 6 10 5 10 2 10 3 10 4 10 5 10 6 10 7 Total Dose [rad) Si )] Strategic Space Strategic Missiles St ra te gi

Analysis of Other Transaction Agreements to Acquire Innovative Renewable Energy Solutions for the Department of the Navy

DTIC Science & Technology

2016-12-01

or an innovative type of wind turbine to generate power for naval stations and housing, the Navy should look for every opportunity to expand the...OT agreements into a new acquisition strategy for its energy task forces? The supporting questions also served to frame the problems plaguing the...considered established technologies like solar devices (photovoltaic, thermal, and concentrated), wind , geothermal, biogenic (biomass, biofuels, waste

Report of the Defense Science Board Task Force on 21st Century Defense Technology Strategies, Volume 2,

DTIC Science & Technology

2000-03-01

national security. The focus should include improved intelligence on development of nuclear, chemical, and biological weapons, their means of...Chemical/ Biological /Nuclear Anti-Terrorism" site provides a variety of links to related materials, (http://www.mindspring.com/~nbcnco) The roots of...vital commercial supplies, and perhaps even the general population with biological or chemical weapons. Accustomed to a qualitative as well as

Training Challenges for the U.S. Army in the Pacific

DTIC Science & Technology

2013-03-01

each other on a frequent enough basis to be thought of as “interoperable.” All the parties involved have different standard operating procedures ...13 All have different command and control technologies and all have different procedures to plan, prepare, coordinate and synchronize operations...does not fix it. Joint Task Force tactics, techniques and procedures are eventually developed but they take time and amount to a band aid as opposed

Commonwealth of the Northern Mariana Islands Strategic Energy Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conrad, M. D.; Ness, J. E.

2013-07-01

Describes various energy strategies available to CNMI to meet the territory's goal of diversifying fuel sources and reducing fossil energy consumption. The information presented in this strategic energy plan will be used by the CNMI Governor's Energy Task Force to develop an energy action plan. Available energy strategies include policy changes, education and outreach, and expanding the use of a range of energy technologies, including renewable electricity production and buildings energy efficiency and conservation.

Report of the Defense Science Board Task Force on Defense Nuclear Agency

DTIC Science & Technology

1993-04-01

capability . including an adequate body of technically-qualifted people? ...................................................... ilI 3) What happens f...operational or warfighting capabilities ; no established way of providing support to CINCs: and in any event. DNA’s technology programs are broader than DOE’s...success of the major primes and their subcontractors (who are part of the DNA core capability ). We recommend that DNA continue to be the primary focal

Real-Time Speech-to-Text Services. [A Report of the] National Task Force on Quality of Services in the Postsecondary Education of Deaf and Hard of Hearing Students.

ERIC Educational Resources Information Center

Stinson, Michael; Eisenberg, Sandy; Horn, Christy; Larson, Judy; Levitt, Harry; Stuckless, Ross

This report describes and discusses several applications of new computer-based technologies which enable postsecondary students with deafness or hearing impairments to read the text of the language being spoken by the instructor and fellow students virtually in real time. Two current speech-to-text options are described: (1) steno-based systems in…

A Fresh Look at Internet Protocol Version 6 (IPv6) for Department of Defense (DoD) Networks

DTIC Science & Technology

2010-08-01

since system administration practices (such as the use of security appliances) depend heavily on tools for network management, diagnosis and protection...are mobile ad hoc networks (MANETs) and yet there is limited practical experience with MANETs and their performance. Further, the interaction between...Systems FCS Future Combat System IETF Internet Engineering Task Force ISAT Information Science and Technology BAST Board on Army Science and

Report of the Defense Science Board Task Force on Department of Defense Biological Safety and Security Program

DTIC Science & Technology

2009-05-01

Three (NAMRU-3) - Lima, Peru : Naval Medical Research Center Detachment (NMRCD) *These labs are co-located. To provide some measure of the scope and...Aceh, Indonesia and the more recent earthquakes in central Java and Peru . Edgewood Chemical Biological Center (ECBC) ECBC’s science and technology... diabetes , obesity, cancer, psychiatric disorders, problems of pregnancy, AIDS, hepatitis, malaria, parasitic infections, and a host of other

Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.

PubMed

Kim, Dae-Min; Kong, Yong-Ku

2016-12-01

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.

U.S. Preventive Services Task Force recommendations and cancer screening among female Medicare beneficiaries.

PubMed

Salloum, Ramzi G; Kohler, Racquel E; Jensen, Gail A; Sheridan, Stacey L; Carpenter, William R; Biddle, Andrea K

2014-03-01

Medicare covers several cancer screening tests not currently recommended by the U.S. Preventive Services Task Force (Task Force). In September 2002, the Task Force relaxed the upper age limit of 70 years for breast cancer screening recommendations, and in March 2003 an upper age limit of 65 years was introduced for cervical cancer screening recommendations. We assessed whether mammogram and Pap test utilization among women with Medicare coverage is influenced by changes in the Task Force's recommendations for screening. We identified female Medicare beneficiaries aged 66-80 years and used bivariate probit regression to examine the receipt of breast (mammogram) and cervical (Pap test) cancer screening reflecting changes in the Task Force recommendations. We analyzed 9,760 Medicare Current Beneficiary Survey responses from 2001 to 2007. More than two-thirds reported receiving a mammogram and more than one-third a Pap test in the previous 2 years. Lack of recommendation was given as a reason for not getting screened among the majority (51% for mammogram and 75% for Pap). After controlling for beneficiary-level socioeconomic characteristics and access to care factors, we did not observe a significant change in breast and cervical cancer screening patterns following the changes in Task Force recommendations. Although there is evidence that many Medicare beneficiaries adhere to screening guidelines, some women may be receiving non-recommended screening services covered by Medicare.

Deficits in inhibitory force control in young adults with ADHD.

PubMed

Neely, Kristina A; Wang, Peiyuan; Chennavasin, Amanda P; Samimy, Shaadee; Tucker, Jacqueline; Merida, Andrea; Perez-Edgar, Koraly; Huang-Pollock, Cynthia

2017-05-01

Poor inhibitory control is a well-established cognitive correlate of adults with ADHD. However, the simple reaction time (RT) task used in a majority of studies records performance errors only via the presence or absence of a single key press. This all-or-nothing response makes it impossible to capture subtle differences in underlying processes that shape performance. Subsequently, all-or-nothing tasks may underestimate the prevalence of executive function deficits in ADHD. The current study measured inhibitory control using a standard Go/No-Go RT task and a more sensitive continuous grip force task among adults with (N=51, 22 female) and without (N=51, 29 female) ADHD. Compared to adults without ADHD, adults with ADHD made more failed inhibits in the classic Go/No-Go paradigm and produced greater and more variable force during motor inhibition. The amount of force produced on failed inhibits was a stronger predictor of ADHD-related symptoms than the number of commissions in the standard RT task. Adults with ADHD did not differ from those without ADHD on the mean force and variability of force produced in Go trials. These findings suggest that the use of a precise and continuous motor task, such as the force task used here, provides additional information about the nature of inhibitory motor control in adults with ADHD. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Guide to Community Preventive Services and Disability Inclusion.

PubMed

Hinton, Cynthia F; Kraus, Lewis E; Richards, T Anne; Fox, Michael H; Campbell, Vincent A

2017-12-01

Approximately 40 million people in the U.S. identify as having a serious disability, and people with disabilities experience many health disparities compared with the general population. The Guide to Community Preventive Services (The Community Guide) identifies evidence-based programs and policies recommended by the Community Preventive Services Task Force (Task Force) to promote health and prevent disease. The Community Guide was assessed to answer the questions: are Community Guide public health intervention recommendations applicable to people with disabilities, and are adaptations required? An assessment of 91 recommendations from The Community Guide was conducted for 15 health topics by qualitative analysis involving three data approaches: an integrative literature review (years 1980-2011), key informant interviews, and focus group discussion during 2011. Twenty-six recommended interventions would not need any adaptation to be of benefit to people with disabilities. Forty-one recommended interventions could benefit from adaptations in communication and technology; 33 could benefit from training adaptations; 31 from physical accessibility adaptations; and 16 could benefit from other adaptations, such as written policy changes and creation of peer support networks. Thirty-eight recommended interventions could benefit from one or more adaptations to enhance disability inclusion. As public health and healthcare systems implement Task Force recommendations, identifying and addressing barriers to full participation for people with disabilities is important so that interventions reach the entire population. With appropriate adaptations, implementation of recommendations from The Community Guide could be successfully expanded to address the needs of people with disabilities. Published by Elsevier Inc.

Estimation of lumbar spinal loading and trunk muscle forces during asymmetric lifting tasks: application of whole-body musculoskeletal modelling in OpenSim.

PubMed

Kim, Hyun-Kyung; Zhang, Yanxin

2017-04-01

Large spinal compressive force combined with axial torsional shear force during asymmetric lifting tasks is highly associated with lower back injury (LBI). The aim of this study was to estimate lumbar spinal loading and muscle forces during symmetric lifting (SL) and asymmetric lifting (AL) tasks using a whole-body musculoskeletal modelling approach. Thirteen healthy males lifted loads of 7 and 12 kg under two lifting conditions (SL and AL). Kinematic data and ground reaction force data were collected and then processed by a whole-body musculoskeletal model. The results show AL produced a significantly higher peak lateral shear force as well as greater peak force of psoas major, quadratus lumborum, multifidus, iliocostalis lumborum pars lumborum, longissimus thoracis pars lumborum and external oblique than SL. The greater lateral shear forces combined with higher muscle force and asymmetrical muscle contractions may have the biomechanical mechanism responsible for the increased risk of LBI during AL. Practitioner Summary: Estimating lumbar spinal loading and muscle forces during free-dynamic asymmetric lifting tasks with a whole-body musculoskeletal modelling in OpenSim is the core value of this research. The results show that certain muscle groups are fundamentally responsible for asymmetric movement, thereby producing high lumbar spinal loading and muscle forces, which may increase risks of LBI during asymmetric lifting tasks.

Finger Interdependence: Linking the Kinetic and Kinematic Variables

PubMed Central

Kim, Sun Wook; Shim, Jae Kun; Zatsiorsky, Vladimir M.; Latash, Mark L.

2008-01-01

We studied the dependence between voluntary motion of a finger and pressing forces produced by the tips of other fingers of the hand. Subjects moved one of the fingers (task finger) of the right hand trying to follow a cyclic, ramp-like flexion-extension template at different frequencies. The other fingers (slave fingers) were restricted from moving; their flexion forces were recorded and analyzed. Index finger motion caused the smallest force production by the slave fingers. Larger forces were produced by the neighbors of the task finger; these forces showed strong modulation over the range of motion of the task finger. The enslaved forces were higher during the flexion phase of the movement cycle as compared to the extension phase. The index of enslaving expressed in N/rad was higher when the task finger moved through the more flexed postures. The dependence of enslaving on both range and direction of task finger motion poses problems for methods of analysis of finger coordination based on an assumption of universal matrices of finger inter-dependence. PMID:18255182

Report of the MLA Task Force on Evaluating Scholarship for Tenure and Promotion

ERIC Educational Resources Information Center

Modern Language Association, 2007

2007-01-01

In 2004 the Executive Council of the Modern Language Association of America (MLA) created a task force to examine current standards and emerging trends in publication requirements for tenure and promotion in English and foreign language departments in the United States. To fulfill its charge, the task force reviewed numerous studies, reports, and…

Short-Circuiting the Bureaucracy: Policy Origins in Education.

ERIC Educational Resources Information Center

Graham, Hugh Davis

The Great Society's secret task forces created by Lyndon Johnson, particularly in the case-study area of federal education policy, show the use and misuse of the task force device. Modern use of it began with John F. Kennedy. Although he used the task force device effectively sometimes, he did not use it effectively in his educational programs in…

77 FR 39724 - U.S. Coral Reef Task Force Public Meeting and Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

...-DS61200000] U.S. Coral Reef Task Force Public Meeting and Public Comment AGENCY: Fish and Wildlife Service... Wildlife Service (Service), announce a public meeting of the U.S. Coral Reef Task Force (USCRTF) and a... strengthen U.S. government actions to better preserve and protect coral reef ecosystems. The Departments of...

Idaho Rural Education Task Force. Public School Information. Legislative Report, 2008

ERIC Educational Resources Information Center

Idaho State Department of Education, 2008

2008-01-01

The Idaho Rural Education Task Force was formed in July 2007 with the goal of proposing and examining solutions to challenges facing rural schools. The task force's work this year has focused on three areas: recruitment and retention of highly qualified teachers, funding shortages related to insurance costs and staff allowances, and the technology…

Lifelong Learning NCES Task Force: Final Report, Volume I. Working Paper Series.

ERIC Educational Resources Information Center

Binkley, Marilyn; Hudson, Lisa; Knepper, Paula; Kolstad, Andy; Stowe, Peter; Wirt, John

In September 1998, the National Center for Education Statistics (NCES) established a 1-year task force to review the NCES's role concerning lifelong learning. The eight-member task force established a working definition of lifelong learning ("a process or system through which individuals are able and willing to learn at all stages of life,…

Million Hearts 2022: Understanding the Links between Environmental Pollutant Exposure and Cardiovascular and Cerebrovascular Events - Justus-Warren Heart Disease and Stroke Prevention Task Force

EPA Science Inventory

The webinar was requested by the Justus-Warren Heart Disease and Stroke Prevention Task Force. From their website, “The task force was established in 1995 in North Carolina to provide statewide leadership for the prevention and management of cardiovascular disease. Meetings are...

History and background of the California Oak Mortality Task Force (COMTF)

Treesearch

Mark R. Stanley

2006-01-01

The California Oak Mortality Task Force was formed in August 2000 as a consensus group to address the impacts caused by Phytophthora ramorum. It is over 1000 strong with over 80 agencies, universities, public, and private groups currently involved. The Task Force has been a tremendous success and may serve as model for other similar efforts.

77 FR 17534 - Self-Regulatory Organizations; The Depository Trust Company; Notice of Filing of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-26

... Association (``SIFMA'') formed the MMI Blue-Sky Task Force (``Task Force'') to address systemic and unique... processing. The Task Force, along other money market industry members,\\8\\ determined that DTC's current MMI... amount or proceeds after the 3 p.m. E.T. deadline for RTP instructions.\\9\\ Accordingly, DTC is proposing...

"Rekindle and Recapture the Love": Establishing System-Wide Indicators of Progress in Community Engagement and Economic Development

ERIC Educational Resources Information Center

Janke, Emily M.

2014-01-01

In May 2012, University of North Carolina (UNC) President Tom Ross simultaneously commissioned two task forces to develop indicators that all UNC campuses could use to measure "progress in community engagement and economic development." The charge to the Community Engagement Task Force and the Economic Development Task Force was to…

77 FR 16483 - Petition for Rulemaking Submitted by the Natural Resources Defense Council, Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-21

... Enhancing Reactor Safety in the 21st Century: The Near-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident'' (Fukushima Task Force Report, ADAMS Accession No. ML111861807), dated July 12..., of the Fukushima Task Force Report, regarding the enhancement of the ability of nuclear power plants...

Report of the Task Force on Continuing Education and Non-Credit Instruction.

ERIC Educational Resources Information Center

Ernest, Richard J.; And Others

The Task Force on Continuing Education and Non-Credit Instruction was appointed to develop specific strategies for expanding lifelong learning and non-credit instruction in the Virginia community colleges. The task force reviewed a report on the state funding of non-credit instruction; wrote to the community college coordinating offices in 17…

ACHP | News

Science.gov Websites

Search skip specific nav links Home arrow News arrow June 27, 2012 ACHP Rightsizing Task Force to Meet in Cleveland The ACHP's Rightsizing Task Force will be making a visit to Cleveland, Ohio, June 25-26 for a tour and a listening session and open meeting. The task force will host a public meeting on June 26 at

Responding to Violence and Abuse: Educating Minnesota Professionals for the Future. A Report of the Statewide Task Forces.

ERIC Educational Resources Information Center

Minnesota Higher Education Center against Violence and Abuse, St. Paul.

In response to a 1993 Minnesota crime bill, four task forces reviewed violence education in professional higher education programs and made recommendations for legislation and law enforcement. The four task forces--in Law, Health Services, Human Services, and Education--made several critical recommendations that applied across professions:…

National Library of Education Advisory Task Force. Briefing Book.

ERIC Educational Resources Information Center

National Library of Education (ED/OERI), Washington, DC.

This briefing book with appendices was prepared for the initial meetings of the National Library of Education Advisory Task Force (NLE/ATF), in March 1996. An agenda for this meeting is included in the briefing book. The first section, "Governing Authorities for NLE and the Advisory Task Force," contains a copy of Public Law 103-227,…

Flight telerobotic servicer legacy

NASA Astrophysics Data System (ADS)

Shattuck, Paul L.; Lowrie, James W.

1992-11-01

The Flight Telerobotic Servicer (FTS) was developed to enhance and provide a safe alternative to human presence in space. The first step for this system was a precursor development test flight (DTF-1) on the Space Shuttle. DTF-1 was to be a pathfinder for manned flight safety of robotic systems. The broad objectives of this mission were three-fold: flight validation of telerobotic manipulator (design, control algorithms, man/machine interfaces, safety); demonstration of dexterous manipulator capabilities on specific building block tasks; and correlation of manipulator performance in space with ground predictions. The DTF-1 system is comprised of a payload bay element (7-DOF manipulator with controllers, end-of-arm gripper and camera, telerobot body with head cameras and electronics module, task panel, and MPESS truss) and an aft flight deck element (force-reflecting hand controller, crew restraint, command and display panel and monitors). The approach used to develop the DTF-1 hardware, software and operations involved flight qualification of components from commercial, military, space, and R controller, end-of-arm tooling, force/torque transducer) and the development of the telerobotic system for space applications. The system is capable of teleoperation and autonomous control (advances state of the art); reliable (two-fault tolerance); and safe (man-rated). Benefits from the development flight included space validation of critical telerobotic technologies and resolution of significant safety issues relating to telerobotic operations in the Shuttle bay or in the vicinity of other space assets. This paper discusses the lessons learned and technology evolution that stemmed from developing and integrating a dexterous robot into a manned system, the Space Shuttle. Particular emphasis is placed on the safety and reliability requirements for a man-rated system as these are the critical factors which drive the overall system architecture. Other topics focused on include: task requirements and operational concepts for servicing and maintenance of space platforms; origins of technology for dexterous robotic systems; issues associated with space qualification of components; and development of the industrial base to support space robotics.

Attainment and retention of force moderation following laparoscopic resection training with visual force feedback.

PubMed

Hernandez, Rafael; Onar-Thomas, Arzu; Travascio, Francesco; Asfour, Shihab

2017-11-01

Laparoscopic training with visual force feedback can lead to immediate improvements in force moderation. However, the long-term retention of this kind of learning and its potential decay are yet unclear. A laparoscopic resection task and force sensing apparatus were designed to assess the benefits of visual force feedback training. Twenty-two male university students with no previous experience in laparoscopy underwent relevant FLS proficiency training. Participants were randomly assigned to either a control or treatment group. Both groups trained on the task for 2 weeks as follows: initial baseline, sixteen training trials, and post-test immediately after. The treatment group had visual force feedback during training, whereas the control group did not. Participants then performed four weekly test trials to assess long-term retention of training. Outcomes recorded were maximum pulling and pushing forces, completion time, and rated task difficulty. Extreme maximum pulling force values were tapered throughout both the training and retention periods. Average maximum pushing forces were significantly lowered towards the end of training and during retention period. No significant decay of applied force learning was found during the 4-week retention period. Completion time and rated task difficulty were higher during training, but results indicate that the difference eventually fades during the retention period. Significant differences in aptitude across participants were found. Visual force feedback training improves on certain aspects of force moderation in a laparoscopic resection task. Results suggest that with enough training there is no significant decay of learning within the first month of the retention period. It is essential to account for differences in aptitude between individuals in this type of longitudinal research. This study shows how an inexpensive force measuring system can be used with an FLS Trainer System after some retrofitting. Surgical instructors can develop their own tasks and adjust force feedback levels accordingly.

Nano/micro-scale magnetophoretic devices for biomedical applications

NASA Astrophysics Data System (ADS)

Lim, Byeonghwa; Vavassori, Paolo; Sooryakumar, R.; Kim, CheolGi

2017-01-01

In recent years there have been tremendous advances in the versatility of magnetic shuttle technology using nano/micro-scale magnets for digital magnetophoresis. While the technology has been used for a wide variety of single-cell manipulation tasks such as selection, capture, transport, encapsulation, transfection, or lysing of magnetically labeled and unlabeled cells, it has also expanded to include parallel actuation and study of multiple bio-entities. The use of nano/micro-patterned magnetic structures that enable remote control of the applied forces has greatly facilitated integration of the technology with microfluidics, thereby fostering applications in the biomedical arena. The basic design and fabrication of various scaled magnets for remote manipulation of individual and multiple beads/cells, and their associated energies and forces that underlie the broad functionalities of this approach, are presented. One of the most useful features enabled by such advanced integrated engineering is the capacity to remotely tune the magnetic field gradient and energy landscape, permitting such multipurpose shuttles to be implemented within lab-on-chip platforms for a wide range of applications at the intersection of cellular biology and biotechnology.

A teleoperation training simulator with visual and kinesthetic force virtual reality

NASA Technical Reports Server (NTRS)

Kim, Won S.; Schenker, Paul

1992-01-01

A force-reflecting teleoperation training simulator with a high-fidelity real-time graphics display has been developed for operator training. A novel feature of this simulator is that it enables the operator to feel contact forces and torques through a force-reflecting controller during the execution of the simulated peg-in-hole task, providing the operator with the feel of visual and kinesthetic force virtual reality. A peg-in-hole task is used in our simulated teleoperation trainer as a generic teleoperation task. A quasi-static analysis of a two-dimensional peg-in-hole task model has been extended to a three-dimensional model analysis to compute contact forces and torques for a virtual realization of kinesthetic force feedback. The simulator allows the user to specify force reflection gains and stiffness (compliance) values of the manipulator hand for both the three translational and the three rotational axes in Cartesian space. Three viewing modes are provided for graphics display: single view, two split views, and stereoscopic view.

Improving child and adolescent psychiatry education for medical students: an inter-organizational collaborative action plan.

PubMed

Fox, Geraldine S; Stock, Saundra; Briscoe, Gregory W; Beck, Gary L; Horton, Rita; Hunt, Jeffrey I; Liu, Howard Y; Partner Rutter, Ashley; Sexson, Sandra; Schlozman, Steven C; Stubbe, Dorothy E; Stuber, Margaret L

2012-11-01

A new Child and Adolescent Psychiatry in Medical Education (CAPME) Task Force, sponsored by the Association for Directors of Medical Student Education in Psychiatry (ADMSEP), has created an inter-organizational partnership between child and adolescent psychiatry (CAP) educators and medical student educators in psychiatry. This paper outlines the task force design and strategic plan to address the long-standing dearth of CAP training for medical students. The CAPME ADMSEP Task Force, formed in 2010, identified common challenges to teaching CAP among ADMSEP's CAPME Task Force members, utilizing focus-group discussions and a needs-assessment survey. The Task Force was organized into five major sections, with inter-organizational action plans to address identified areas of need, such as portable modules and development of benchmark CAP competencies. The authors predict that all new physicians, regardless of specialty, will be better trained in CAP. Increased exposure may also improve recruitment into this underserved area.

Revised American Thyroid Association guidelines for the management of medullary thyroid carcinoma.

PubMed

Wells, Samuel A; Asa, Sylvia L; Dralle, Henning; Elisei, Rossella; Evans, Douglas B; Gagel, Robert F; Lee, Nancy; Machens, Andreas; Moley, Jeffrey F; Pacini, Furio; Raue, Friedhelm; Frank-Raue, Karin; Robinson, Bruce; Rosenthal, M Sara; Santoro, Massimo; Schlumberger, Martin; Shah, Manisha; Waguespack, Steven G

2015-06-01

The American Thyroid Association appointed a Task Force of experts to revise the original Medullary Thyroid Carcinoma: Management Guidelines of the American Thyroid Association. The Task Force identified relevant articles using a systematic PubMed search, supplemented with additional published materials, and then created evidence-based recommendations, which were set in categories using criteria adapted from the United States Preventive Services Task Force Agency for Healthcare Research and Quality. The original guidelines provided abundant source material and an excellent organizational structure that served as the basis for the current revised document. The revised guidelines are focused primarily on the diagnosis and treatment of patients with sporadic medullary thyroid carcinoma (MTC) and hereditary MTC. The Task Force developed 67 evidence-based recommendations to assist clinicians in the care of patients with MTC. The Task Force considers the recommendations to represent current, rational, and optimal medical practice.

Revised American Thyroid Association Guidelines for the Management of Medullary Thyroid Carcinoma

PubMed Central

Asa, Sylvia L.; Dralle, Henning; Elisei, Rossella; Evans, Douglas B.; Gagel, Robert F.; Lee, Nancy; Machens, Andreas; Moley, Jeffrey F.; Pacini, Furio; Raue, Friedhelm; Frank-Raue, Karin; Robinson, Bruce; Rosenthal, M. Sara; Santoro, Massimo; Schlumberger, Martin; Shah, Manisha; Waguespack, Steven G.

2015-01-01

Introduction: The American Thyroid Association appointed a Task Force of experts to revise the original Medullary Thyroid Carcinoma: Management Guidelines of the American Thyroid Association. Methods: The Task Force identified relevant articles using a systematic PubMed search, supplemented with additional published materials, and then created evidence-based recommendations, which were set in categories using criteria adapted from the United States Preventive Services Task Force Agency for Healthcare Research and Quality. The original guidelines provided abundant source material and an excellent organizational structure that served as the basis for the current revised document. Results: The revised guidelines are focused primarily on the diagnosis and treatment of patients with sporadic medullary thyroid carcinoma (MTC) and hereditary MTC. Conclusions: The Task Force developed 67 evidence-based recommendations to assist clinicians in the care of patients with MTC. The Task Force considers the recommendations to represent current, rational, and optimal medical practice. PMID:25810047

International confederation for cleft lip and palate and related craniofacial anomalies task force report: holistic outcomes.

PubMed

Broder, Hillary L

2014-11-01

Objective : This paper describes the process and outcomes of the 2013 American Cleft Palate-Craniofacial Association task force on Holistic Outcomes. The goals and membership of the task force are presented. Methods : Using internet communication, the group introduced themselves, shared ideas and information related to holistic assessment and implementation of using a validated holistic measure, the Child Oral Health Impact Profile (COHIP) at participating international sites. Results : Data from the sites were analyzed using descriptive statistics. Administration of the COHIP was successful. It varied from self-completion as well as verbal presentation due to language differences and a function of the short time period to complete collection. Additionally qualitative comments were reported by the task force site directors. Conclusions : Future directions for holistic assessment and communication among task force members and sites were discussed at the Congress and are presented in this report.

NASA's Big Data Task Force

NASA Astrophysics Data System (ADS)

Holmes, C. P.; Kinter, J. L.; Beebe, R. F.; Feigelson, E.; Hurlburt, N. E.; Mentzel, C.; Smith, G.; Tino, C.; Walker, R. J.

2017-12-01

Two years ago NASA established the Ad Hoc Big Data Task Force (BDTF - https://science.nasa.gov/science-committee/subcommittees/big-data-task-force), an advisory working group with the NASA Advisory Council system. The scope of the Task Force included all NASA Big Data programs, projects, missions, and activities. The Task Force focused on such topics as exploring the existing and planned evolution of NASA's science data cyber-infrastructure that supports broad access to data repositories for NASA Science Mission Directorate missions; best practices within NASA, other Federal agencies, private industry and research institutions; and Federal initiatives related to big data and data access. The BDTF has completed its two-year term and produced several recommendations plus four white papers for NASA's Science Mission Directorate. This presentation will discuss the activities and results of the TF including summaries of key points from its focused study topics. The paper serves as an introduction to the papers following in this ESSI session.

A Model for Steering with Haptic-Force Guidance

NASA Astrophysics Data System (ADS)

Yang, Xing-Dong; Irani, Pourang; Boulanger, Pierre; Bischof, Walter F.

Trajectory-based tasks are common in many applications and have been widely studied. Recently, researchers have shown that even very simple tasks, such as selecting items from cascading menus, can benefit from haptic-force guidance. Haptic guidance is also of significant value in many applications such as medical training, handwriting learning, and in applications requiring precise manipulations. There are, however, only very few guiding principles for selecting parameters that are best suited for proper force guiding. In this paper, we present a model, derived from the steering law that relates movement time to the essential components of a tunneling task in the presence of haptic-force guidance. Results of an experiment show that our model is highly accurate for predicting performance times in force-enhanced tunneling tasks.

Results of telerobotic hand controller study using force information and rate control

NASA Technical Reports Server (NTRS)

Willshire, Kelli F.; Harrison, F. W.; Hogge, Edward F.; Williams, Robert L.; Soloway, Donald

1992-01-01

To increase quantified information about the effectiveness and subjective workload of force information relayed through manipulator input control devices, a space related task was performed by eight subjects with kinesthetic force feedback and/or local force accommodation through three different input control devices (i.e., hand controllers) operating in rate control mode. Task completion time, manipulator work, and subjective responses were measured. Results indicated a difference among the hand controllers. For the Honeywell six degree-of-freedom hand controller, the overall task completion times were shortest, the amount of work exerted was the least, and was the most preferred by test subjects. Neither force accommodation with or without reflection resulted in shorter task completion times or reduced work although those conditions were better than no force information for some aspects. Comparisons of results from previous studies are discussed.

A Study of USN Aircrew Attitudes Regarding Technology’s Ability to Replace the Naval Flight Officer on Typical Combat Missions Carrier Based Aircraft are Tasked to Perform

DTIC Science & Technology

1993-09-01

Management, Air Force Institute of Technology (AU), Wright Patterson AFB CH, 1991. Horngren , Charles T. and George Foster. Cost Accounting : A Managerial...Submit - TotalCastOPnperewldSubmnit * s ((I eEnter this figure in column 13(c)(1) SHORE ESTAILISHMENT COST TO PREPARE AND SUBMIT PAY GRADE No OR ORYRT...W’IC QUALIT’Y TI15?SrTF-* AFIT/GSM/LAR/93S- 1 A SILMY OF USN AIRCREW ATTIU2 RECARDING TE*L ’ S ABILITY TO REPLACE THE NAVAL FLICHT OFFICER ON TYPICAL

[Problematic issues and prospects of development of information and telecommunication technologies in the medical service of the Armed Forces].

PubMed

Kalachev, O V; Pershin, I V; Borisov, D N; Korneenkov, A A

2014-12-01

Medical information systems composed of many specialized modules help in synchronous solving of diagnostic, therapeutic, administrative, financial, statistical, and other tasks. According to the authors, the creation of a single information space of the medical service, integrating it into a single information space of the Defense Ministry of the Russian Fedaration, development and widespread use of telemedicine technology will significantly accelerate the integration in the daily activities of military hospitals of the latest achievements in medical science and practices consistent with the objectives of improving the military health care and improvement of the quality and accessibility of health care.

The autonomous sciencecraft constellations

NASA Technical Reports Server (NTRS)

Sherwood, R. L.; Chien, S.; Castano, R.; Rabideau, G.

2003-01-01

The Autonomous Sciencecraft Experiment (ASE) will fly onboard the Air Force TechSat 21 constellation of three spacecraft scheduled for launch in 2006. ASE uses onboard continuous planning, robust task and goal-based execution, model-based mode identification and reconfiguration, and onboard machine learning and pattern recognition to radically increase science return by enabling intelligent downlink selection and autonomous retargeting. In this paper we discuss how these AI technologies are synergistically integrated in a hybrid multi-layer control architecture to enable a virtual spacecraft science agent. Demonstration of these capabilities in a flight environment will open up tremendous new opportunities in planetary science, space physics, and earth science that would be unreachable without this technology.

Design of an Eye Limiting Resolution Visual System Using Commercial-Off-the-Shelf Equipment

NASA Technical Reports Server (NTRS)

Sweet, Barbara T.; Giovannetti, Dean P.

2008-01-01

A feasibility study was conducted to determine if a flight simulator with an eye-limiting resolution out-the-window (OTW) visual system could be built using commercial off-the-shelf (COTS) technology and used to evaluate the visual performance of Air Force pilots in an operations context. Results of this study demonstrate that an eye limiting OTW visual system can be built using COTS technology. Further, a series of operationally-based tasks linked to clinical vision tests can be used within the synthetic environment to demonstrate a correlation and quantify the level of correlation between vision and operational aviation performance.

Advanced Virus Detection Technologies Interest Group (AVDTIG): Efforts on High Throughput Sequencing (HTS) for Virus Detection.

PubMed

Khan, Arifa S; Vacante, Dominick A; Cassart, Jean-Pol; Ng, Siemon H S; Lambert, Christophe; Charlebois, Robert L; King, Kathryn E

Several nucleic-acid based technologies have recently emerged with capabilities for broad virus detection. One of these, high throughput sequencing, has the potential for novel virus detection because this method does not depend upon prior viral sequence knowledge. However, the use of high throughput sequencing for testing biologicals poses greater challenges as compared to other newly introduced tests due to its technical complexities and big data bioinformatics. Thus, the Advanced Virus Detection Technologies Users Group was formed as a joint effort by regulatory and industry scientists to facilitate discussions and provide a forum for sharing data and experiences using advanced new virus detection technologies, with a focus on high throughput sequencing technologies. The group was initiated as a task force that was coordinated by the Parenteral Drug Association and subsequently became the Advanced Virus Detection Technologies Interest Group to continue efforts for using new technologies for detection of adventitious viruses with broader participation, including international government agencies, academia, and technology service providers. © PDA, Inc. 2016.

Task Force for Expanding Credit and Noncredit Courses for Students with Intellectual and Development Disabilities. Final Report

ERIC Educational Resources Information Center

Maryland Higher Education Commission, 2016

2016-01-01

The Task Force to Study the Impact of Expanding Credit and Noncredit Courses for Students with Intellectual and Developmental Disabilities was formed in July 2013. Chapter 392, Acts of 2013, (House Bill 813) established the Task Force to Study the Impact of Expanding Credit and Noncredit Courses for Students with Intellectual and Developmental…

Arizona Community Colleges: Report of the Task Force on Community College Enrollment Growth Planning.

ERIC Educational Resources Information Center

Arizona State Board of Directors for Community Colleges, Phoenix.

The Task Force on Enrollment Growth Planning (TFEGP), authorized in 1992 by the State Board of Directors for Community Colleges (SBDCC) of Arizona, includes representatives from each community college as well as staff from SBDCC office. The Task Force was created to prepare enrollment growth estimates for community colleges through the year 2010;…

The Educational, Fiscal, and Access Implications of the Fall Academic Calendar. The Report of the Academic Calendar Task Force.

ERIC Educational Resources Information Center

Armstrong, William B.

In 1991, California's San Diego Community College District (SDCCD) formed a task force to investigate the effects of adopting academic calendars that end either before or after the winter holidays. To gather information, the task force performed a grade distribution analysis among district college students to determine the impact of fall semester…

Report of the Task Force to Explore Feasibility of a Three-Year Baccalaureate Program. Established March 1, 1972.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee.

Presented in this document are the results of a Task Force study in Florida that explored the feasibility of a baccalaureate degree program that can be completed in 3 academic years. The Task Force addressed itself to the issues surrounding time-shortened degrees: acceleration; locksteps; relevancy of educational objectives to individual and…

Report of the Task Force on the Status of Women at the University of California, Davis.

ERIC Educational Resources Information Center

Fisher, Kathleen M.

The charge given to the Task Force on the Status of Women at the University of California, Davis, was to determine the employment opportunities for women on the Davis campus. The Task Force addressed itself primarily to 4 major employment categories: non-academic staff, academic staff, faculty, and administration, with lesser consideration given…

A Report by the Governor's Task Force on Vocational and Technical Education.

ERIC Educational Resources Information Center

Governor's Task Force on Vocational and Technical Education, Columbus, OH.

On July 19, 1968, a Task Force on Vocational and Technical Education was created by the governor of Ohio to develop proposals for organization, financing, and legislation. Some major problems to which the Task Force gave attention were: (1) the serious gap between the need for and the availability of vocational and technical education, (2) the…

76 FR 70067 - Taxpayers and Ratepayers United, et al.; Environmental Impacts of Severe Reactor and Spent Fuel...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... environmental issues raised in the Fukushima Task Force Report. The NRC is not instituting a public comment... Reactor Safety in the 21st Century: The Near-Term Task Force Review of Insights from the Fukushima Dai-ichi Accident'' (Fukushima Task Force Report, ADAMS Accession No. ML111861807), dated July 12, 2011, as...

77 FR 30560 - Proposed Generic Communication; Generic Letter on Seismic Risk Evaluations for Operating Reactors

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

... the Fukushima Near-Term Task Force Recommendations 2.1 and 2.3. The request for information letters... addressing the Fukushima Near-Term Task Force Recommendations 2.1 and 2.3. The memorandum is available... Fukushima Near-Term Task Force Recommendations 2.1 and 2.3 (ADAMS Accession Number ML12056A046), as...

The APA Task Force on Statistical Inference (TFSI) Report as a Framework for Teaching and Evaluating Students' Understandings of Study Validity.

ERIC Educational Resources Information Center

Thompson, Bruce

Web-based statistical instruction, like all statistical instruction, ought to focus on teaching the essence of the research endeavor: the exercise of reflective judgment. Using the framework of the recent report of the American Psychological Association (APA) Task Force on Statistical Inference (Wilkinson and the APA Task Force on Statistical…

Building Bridges to the Information Superhighway: Annual Report of the Disabilities Issues Task Force, Federal Communications Commission (March 1995--April 1996).

ERIC Educational Resources Information Center

Federal Communications Commission, Washington, DC.

This report describes activities and accomplishments of the Federal Communications Commission's Disabilities Issues Task Force on disabilities issues from March 1995 through April 1996, its first year. Introductory material includes a message from the chairman of the Commission and a statement of the Task Force's purpose, which is to address…

U. S. Atlantic Fleet, Task Force 85. Operation Plan Number 3-44

DTIC Science & Technology

1944-07-27

Potential Targets in Sectors of Responsibility Gril /8thPhib/Al6-3 Serial: 0031(P) DEAN/14- Potential Targets in Se_otors t of Respon- sibility...tags accompany the remains, ANNEX QUEEN MEDICAL PLAN - Page 6 of 8 GrIl /8thPhib/Al6-3 WESTERN NAVAL TASK FORCE, Serial: 0037(P) TASK FORCE EIGHTY-FIVE