Entry, Descent, and Landing with Propulsive Deceleration: Supersonic Retropropulsion Wind Tunnel Testing and Shock Phenomena

NASA Technical Reports Server (NTRS)

Palaszewski, Bryan

2013-01-01

The future exploration of the Solar System will require innovations in transportation and the use of entry, descent, and landing (EDL) systems at many planetary landing sites. The cost of space missions has always been prohibitive, and using the natural planetary and planet's moon atmospheres for entry, and descent can reduce the cost, mass, and complexity of these missions. This paper will describe some of the EDL ideas for planetary entry and survey the overall technologies for EDL that may be attractive for future Solar System missions. Future EDL systems may include an inflatable decelerator for the initial atmospheric entry and an additional supersonic retro-propulsion (SRP) rocket system for the final soft landing. A three engine retro-propulsion configuration with a 2.5 inch diameter sphere-cone aeroshell model was tested in the NASA Glenn 1x1 Supersonic Wind Tunnel (SWT). The testing was conducted to identify potential blockage issues in the tunnel, and visualize the rocket flow and shock interactions during supersonic and hypersonic entry conditions. Earlier experimental testing of a 70 degree Viking-like (sphere-cone) aeroshell was conducted as a baseline for testing of a supersonic retro-propulsion system. This baseline testing defined the flow field around the aeroshell and from this comparative baseline data, retro-propulsion options will be assessed. Images and analyses from the SWT testing with 300- and 500-psia rocket engine chamber pressures are presented here. In addition, special topics of electromagnetic interference with retro-propulsion induced shock waves and retro-propulsion for Earth launched booster recovery are also addressed.

SPECIAL TOPIC: ITER L mode confinement database

NASA Astrophysics Data System (ADS)

Kaye, S. M.; Greenwald, M.; Stroth, U.; Kardaun, O.; Kus, A.; Schissel, D.; DeBoo, J.; Bracco, G.; Thomsen, K.; Cordey, J. G.; Miura, Y.; Matsuda, T.; Tamai, H.; Takizuda, T.; Hirayama, T.; Kikuchi, H.; Naito, O.; Chudnovskij, A.; Ongena, J.; Hoang, G.

1997-09-01

This special topic describes the contents of an L mode database that has been compiled with data from Alcator C-Mod, ASDEX, DIII, DIII-D, FTU, JET, JFT-2M, JT-60, PBX-M, PDX, T-10, TEXTOR, TFTR and Tore Supra. The database consists of a total of 2938 entries, 1881 of which are in the L phase while 922 are ohmically heated only (ohmic). Each entry contains up to 95 descriptive parameters, including global and kinetic information, machine conditioning and configuration. The special topic presents a description of the database and the variables contained therein, and it also presents global and thermal scalings along with predictions for ITER. The L mode thermal confinement time scaling, determined from a subset of 1312 entries for which the τE,th are provided, is τE,th = 0.023Ip0.96BT0.03R1.83(R/a)0.06 κ0.64ne0.40Meff0.20P-0.73 in units of seconds, megamps, teslas, metres, -, -, 10-9 m-1

McGraw Hill encyclopedia of science and technology. An international reference work in fifteen volumes including an index

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1982-01-01

This extensively revised and updated 5th Edition features contributions by 3000 distinguished experts - including 16 Nobel Prize winners - working with an international advisory board and 60 consulting editors. Thorough coverage is devoted to 75 separate disciplines in science and technology, from acoustics and biochemistry through fluid mechanics and geophysics to thermodynamics and vertebrate zoology. Detailed entries examine not only the physical and natural sciences, but also all engineering disciplines, discussing both the basic and the most recent theories, concepts, terminology, discoveries, materials, methods, and techniques. All of the new developments and technical advances that have occurred during themore » last five years - in each of the 75 disciplines - have been added to the encyclopedia and are explored in depth. Completely new material deals with such timely and newsworthy subjects as genetic engineering, artificial intelligence, nuclear medicine, desertification, psycholinguistics, industrial robots, and immunoassay. Also covered in extensive entries are such current topics as video disk recording, metallic glasses, acoustic levitation, magnetic bubble memory, gluons, and computerized tomography. The encyclopedia includes more than 15,000 photographs, drawings, maps, charts, and diagrams, shown in full-color, two-color, or black-and-white reproductions.« less

Shuttle launched flight tests - Supporting technology for planetary entry missions

NASA Technical Reports Server (NTRS)

Vetter, H. C.; Mcneilly, W. R.; Siemers, P. M., III; Nachtsheim, P. R.

1975-01-01

The feasibility of conducting Space Shuttle-launched earth entry flight tests to enhance the technology base for second generation planetary entry missions is examined. Outer planet entry environments are reviewed, translated into earth entry requirements and used to establish entry test system design and cost characteristics. Entry speeds up to those needed to simulate radiative heating levels of more than 30 kW/sq cm are shown to be possible. A standardized recoverable test bed concept is described that is capable of accommodating a wide range of entry technology experiments. The economic advantage of shared Shuttle launches are shown to be achievable through a test system configured to the volume constraints of a single Spacelab pallet using existing propulsion components.

Supersonic Retropropulsion Technology Development in NASA's Entry, Descent, and Landing Project

NASA Technical Reports Server (NTRS)

Edquist, Karl T.; Berry, Scott A.; Rhode, Matthew N.; Kelb, Bil; Korzun, Ashley; Dyakonov, Artem A.; Zarchi, Kerry A.; Schauerhamer, Daniel G.; Post, Ethan A.

2012-01-01

NASA's Entry, Descent, and Landing (EDL) space technology roadmap calls for new technologies to achieve human exploration of Mars in the coming decades [1]. One of those technologies, termed Supersonic Retropropulsion (SRP), involves initiation of propulsive deceleration at supersonic Mach numbers. The potential benefits afforded by SRP to improve payload mass and landing precision make the technology attractive for future EDL missions. NASA's EDL project spent two years advancing the technological maturity of SRP for Mars exploration [2-15]. This paper summarizes the technical accomplishments from the project and highlights challenges and recommendations for future SRP technology development programs. These challenges include: developing sufficiently large SRP engines for use on human-scale entry systems; testing and computationally modelling complex and unsteady SRP fluid dynamics; understanding the effects of SRP on entry vehicle stability and controllability; and demonstrating sub-scale SRP entry systems in Earth's atmosphere.

STEM@School: an engaging Serious Game!

NASA Astrophysics Data System (ADS)

terracina, annalisa; mecella, massimo

2016-04-01

Over the last ten years, the way in which education and training is delivered has changed considerably with the advent of new technologies. Thus, technology should be a prominent part of the learning process and should be intended as a support for teachers and learners. One new technology that holds considerable promise for helping to engage learners is Games-Based Learning (GBL). The term game is quite ambiguous, that means that researchers, game designers, parents, students, teachers, etc. have a different concept of games. In this research, we intend games as inquiry based laboratories in which participants are able to imagine, engage with, and reflect upon their experiences. Gaming and schooling have developed into two distinct "knowledge traditions" that often rely on opposing validity criteria for determining what counts and what does not count as relevant knowledge. To avoid that dichotomy, GBL should integrate different aspects that are related to the knowledge itself, to pedagogical aspects, to scenario-based and every day practice. In the above scenario we matured the idea to develop a serious game that integrates the most up-to-date technologies in new teaching trends: Virtual Learning Environments (VLEs) and Intelligent Pedagogical Agents (IPAs). The main idea of our research is a VLE that in turn is a role playing game. The role playing game is a social game in which each student becomes a player with her abilities and her tasks. In order to succeed, all the players should work to achieve a common objective/goal. The storyboard is designed in a way that there is an evolution in the role playing game and a progress in the level of learning as well. The idea of helping students in the process of learning in a different way with respect to the classical approach finds support in many psychological studies and previous work, in particular we refer to Howard Gardner theory (1983): "We might think of the topic as a room with at least five doors or entry points into it. Students vary as to which entry point is most appropriate for them and which routes are most comfortable to follow once they have gained initial access to the room. Awareness of these entry points can help the teacher to introduce new materials in ways in which they can be easily grasped by a range of students; then, as students explore other entry points, they have the chance to develop those multiple perspectives that are the best antidote to stereotypical thinking". In the above scenario, students face with numerous learning opportunities and therefore require intelligent support and guidance. The use of IPAs is proposed as support during the game evolution and each student has its own IPA: they act as learning facilitators and guide the learners in the virtual environment, by explaining topics, answering questions, giving feedbacks, helping the learners to collaborate with others, providing personalized learning support.

[The Development of an Intelligent Long-Term Care Services System That Integrates Innovative Information and Communication Technologies].

PubMed

Huang, Ean-Wen; Chiou, Shwu-Fen; Pan, Mei-Lien; Wu, Hua-Huan; Jiang, Jia-Rong; Lu, Yi-De

2017-08-01

Rapid progress in information and communication technologies and the increasing popularity of healthcare-related applications has increased interest in the topic of intelligent medical care. This topic emphasizes the use of information and communication technologies to collect and analyze a variety of data in order to provide physicians and other healthcare professionals with clinical decision support. At present, so-called smart hospitals are the focal point of most intelligent-systems development activity, with little attention currently being focused on long-term care needs. The present article discusses the application of intelligent systems in the field of long-term care, especially in community and home-based models of care. System-implementation components such as the data entry interface components of mobile devices, the data transmission and synchronization components between the mobile device and file server, the data presentation, and the statistics analysis components are also introduced. These components have been used to develop long-term care service-related applications, including home health nursing, home-care services, meals on wheels, and assistive devices rental. We believe that the findings will be useful for the promotion of innovative long-term care services as well as the improvement of healthcare quality and efficiency.

Literature review of voice recognition and generation technology for Army helicopter applications

NASA Astrophysics Data System (ADS)

Christ, K. A.

1984-08-01

This report is a literature review on the topics of voice recognition and generation. Areas covered are: manual versus vocal data input, vocabulary, stress and workload, noise, protective masks, feedback, and voice warning systems. Results of the studies presented in this report indicate that voice data entry has less of an impact on a pilot's flight performance, during low-level flying and other difficult missions, than manual data entry. However, the stress resulting from such missions may cause the pilot's voice to change, reducing the recognition accuracy of the system. The noise present in helicopter cockpits also causes the recognition accuracy to decrease. Noise-cancelling devices are being developed and improved upon to increase the recognition performance in noisy environments. Future research in the fields of voice recognition and generation should be conducted in the areas of stress and workload, vocabulary, and the types of voice generation best suited for the helicopter cockpit. Also, specific tasks should be studied to determine whether voice recognition and generation can be effectively applied.

Yurok Vocabulary.

ERIC Educational Resources Information Center

Bennett, Ruth, Ed.; And Others

An illustrated vocabulary presents approximately 275 Yurok words organized topically from the Indian perspective to demonstrate the relationship between Yurok Indians and their social and natural worlds. English terms arranged alphabetically within each topic have two accompanying Yurok entries--one a Unifon spelling, the other having syllable…

A Bibliography of Rural Development: Listings by Topic.

ERIC Educational Resources Information Center

Parker, Carrie G.; And Others

Over 776 journal articles pertaining to rural development are cited. Entries are arranged by topic: agriculture, area development, community, economic development, environmental improvement, facilities and services, human resource development, leadership, organization, rural development, rural-urban relationships, and social action. Some articles…

ESA Venus Entry Probe Study

NASA Technical Reports Server (NTRS)

vandenBerg, M. L.; Falkner, P.; Phipps, A.; Underwood, J. C.; Lingard, J. S.; Moorhouse, J.; Kraft, S.; Peacock, A.

2005-01-01

The Venus Entry Probe is one of ESA s Technology Reference Studies (TRS). The purpose of the Technology Reference Studies is to provide a focus for the development of strategically important technologies that are of likely relevance for future scientific missions. The aim of the Venus Entry Probe TRS is to study approaches for low cost in-situ exploration of Venus and other planetary bodies with a significant atmosphere. In this paper, the mission objectives and an outline of the mission concept of the Venus Entry Probe TRS are presented.

Why Some Dash, Why Others Hobble. School Publications

ERIC Educational Resources Information Center

Nation's Schools, 1972

1972-01-01

Judges of first annual school publications contest discuss both good and bad points about publications submitted in the six contest categories of recruitment, finance, community newsletters, internal publications, annual reports, and special topic publications. Of the 736 entries from 289 school districts in 43 states, 151 entries were selected.…

General Electronics Technician.

ERIC Educational Resources Information Center

Vorderstrasse, Ron; Huston, Jane, Ed.

This module follows the "Basic Electronics" module as a guide for a course preparing students for job entry or further education. It includes those additional tasks required above Basic Electronics for job entry in the electronics field. The module contains eight instructional units that cover the following topics: (1) test equipment; (2)…

The Natural Environment: An Annotated Bibliography on Attitudes and Values.

ERIC Educational Resources Information Center

Anglemyer, Mary, Comp.; Seagraves, Eleanor R., Comp.

Presented in this annotated bibliography are 857 entries which deal with ethics, attitudes, and values and the relationship of these topics to the natural environment. The entries (numbered consecutively throughout the book) are arranged by these categories and subcategories: (1) comprehensive--general, decision-making, planning, and population;…

Exploring transduction mechanisms of protein transduction domains (PTDs) in living cells utilizing single-quantum dot tracking (SQT) technology.

PubMed

Suzuki, Yasuhiro

2012-01-01

Specific protein domains known as protein transduction domains (PTDs) can permeate cell membranes and deliver proteins or bioactive materials into living cells. Various approaches have been applied for improving their transduction efficacy. It is, therefore, crucial to clarify the entry mechanisms and to identify the rate-limiting steps. Because of technical limitations for imaging PTD behavior on cells with conventional fluorescent-dyes, how PTDs enter the cells has been a topic of much debate. Utilizing quantum dots (QDs), we recently tracked the behavior of PTD that was derived from HIV-1 Tat (TatP) in living cells at the single-molecule level with 7-nm special precision. In this review article, we initially summarize the controversy on TatP entry mechanisms; thereafter, we will focus on our recent findings on single-TatP-QD tracking (SQT), to identify the major sequential steps of intracellular delivery in living cells and to discuss how SQT can easily provide direct information on TatP entry mechanisms. As a primer for SQT study, we also discuss the latest findings on single particle tracking of various molecules on the plasma membrane. Finally, we discuss the problems of QDs and the challenges for the future in utilizing currently available QD probes for SQT. In conclusion, direct identification of the rate-limiting steps of PTD entry with SQT should dramatically improve the methods for enhancing transduction efficiency.

Patient Care Assisting. A Curriculum for Career Entry in the Nursing Homes of Georgia.

ERIC Educational Resources Information Center

Crawford, Sharon; Bailey, Nancy

This curriculum guide contains 16 units aimed at training entry-level workers as patient care assistants in nursing homes. The units cover the following topics: the role of patient care assistants; psychosocial needs of geriatric patients; work ethics; legal issues; communication skills; infection control; safety issues; patient hygiene; patient…

Encyclopedia of Birth Control.

ERIC Educational Resources Information Center

Rengel, Marian

This encyclopedia brings together in more than 200 entries, arranged in A-to-Z format, a portrait of the complex modern issue that birth control has become with advances in medicine and biochemistry during the 20th century. It is aimed at both the student and the consumer of birth control. Entries cover the following topics: birth control…

Modern Advances in Ablative TPS

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj

2013-01-01

Topics covered include: Physics of Hypersonic Flow and TPS Considerations. Destinations, Missions and Requirements. State of the Art Thermal Protection Systems Capabilities. Modern Advances in Ablative TPS. Entry Systems Concepts. Flexible TPS for Hypersonic Inflatable Aerodynamic Decelerators. Conformal TPS for Rigid Aeroshell. 3-D Woven TPS for Extreme Entry Environment. Multi-functional Carbon Fabric for Mechanically Deployable.

75 FR 36091 - Notice of Availability of the Draft Environmental Impact Statement for Improvements to the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-24

... for Improvements to the Calexico West Port of Entry, Calexico, CA AGENCY: Public Buildings Service... Impact Statement (EIS) for Improvements to the Calexico West Port of Entry, Calexico, California, for... and soils) or topic area (e.g., traffic, environmental justice). After the public comment period...

An Annotated Bibliography of Gay and Lesbian Communication Studies.

ERIC Educational Resources Information Center

Park, Jan Carl

1979-01-01

The 22 entries in this annotated bibliography represent articles that have lesbian women or gay men as subjects and that deal with a specific verbal or nonverbal communication factor. Topics covered in the entries include patterns of self-disclosure in homosexual and heterosexual college students, interpersonal conflict in homosexual relations,…

Planetary/DOD entry technology flight experiments. Volume 2: Planetary entry flight experiments

NASA Technical Reports Server (NTRS)

Christensen, H. E.; Krieger, R. J.; Mcneilly, W. R.; Vetter, H. C.

1976-01-01

The technical feasibility of launching a high speed, earth entry vehicle from the space shuttle to advance technology for the exploration of the outer planets' atmospheres was established. Disciplines of thermodynamics, orbital mechanics, aerodynamics propulsion, structures, design, electronics and system integration focused on the goal of producing outer planet environments on a probe shaped vehicle during an earth entry. Major aspects of analysis and vehicle design studied include: planetary environments, earth entry environment capability, mission maneuvers, capabilities of shuttle upper stages, a comparison of earth entry planetary environments, experiment design and vehicle design.

Nonverbal Communication: A Bibliography.

ERIC Educational Resources Information Center

Arnold, William E.; And Others

The entries in this extensive bibliography represent books, educational journals, dissertations, popular magazines, and research studies that deal with the topic of nonverbal communication. Divided into time periods (1975 to present, 1973 to 1975, and before 1973), the titles span a variety of topics, including the following: sensory perception,…

Selected Bibliography of Egyptian Educational Materials, Vol. 2, No. 3, 1976.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

The selective annotated bibliography of Egyptian educational publications contains 109 entries on 42 topics. Included are journal articles, books, and government documents published during 1976. Content includes the following topics: adult education, art education, audiovisual aids, care for distinguished students, educational planning,…

Communication and Sexuality: An Annotated Bibliography.

ERIC Educational Resources Information Center

Buley, Jerry, Comp.; And Others

The entries in this annotated bibliography represent books, educational journals, dissertations, popular magazines, and research studies that deal with the topic of communication and sexuality. Arranged alphabetically by author and also indexed according to subject matter, the titles span a variety of topics, including the following: sex and…

Selected Bibliography of Educational Materials in Pakistan, Vol. 10, No. 3, 1976, Period Covered July-September 1976.

ERIC Educational Resources Information Center

Saad, Geti, Comp.

There are 100 entries in this annotated bibliography of selected educational materials published in Pakistan from July through September 1976. Most of the materials are taken from journals, newspapers, and government publications. Arranged alphabetically by author in 21 categories, the entries cover topics including educational administration and…

Development of Thermal Protection Materials for Future Mars Entry, Descent and Landing Systems

NASA Technical Reports Server (NTRS)

Cassell, Alan M.; Beck, Robin A. S.; Arnold, James O.; Hwang, Helen; Wright, Michael J.; Szalai, Christine E.; Blosser, Max; Poteet, Carl C.

2010-01-01

Entry Systems will play a crucial role as NASA develops the technologies required for Human Mars Exploration. The Exploration Technology Development Program Office established the Entry, Descent and Landing (EDL) Technology Development Project to develop Thermal Protection System (TPS) materials for insertion into future Mars Entry Systems. An assessment of current entry system technologies identified significant opportunity to improve the current state of the art in thermal protection materials in order to enable landing of heavy mass (40 mT) payloads. To accomplish this goal, the EDL Project has outlined a framework to define, develop and model the thermal protection system material concepts required to allow for the human exploration of Mars via aerocapture followed by entry. Two primary classes of ablative materials are being developed: rigid and flexible. The rigid ablatives will be applied to the acreage of a 10x30 m rigid mid L/D Aeroshell to endure the dual pulse heating (peak approx.500 W/sq cm). Likewise, flexible ablative materials are being developed for 20-30 m diameter deployable aerodynamic decelerator entry systems that could endure dual pulse heating (peak aprrox.120 W/sq cm). A technology Roadmap is presented that will be used for facilitating the maturation of both the rigid and flexible ablative materials through application of decision metrics (requirements, key performance parameters, TRL definitions, and evaluation criteria) used to assess and advance the various candidate TPS material technologies.

Therapeutic potential of TDT 067 (terbinafine in Transfersome): a carrier-based dosage form of terbinafine for onychomycosis.

PubMed

Sigurgeirsson, Bárdur; Ghannoum, Mahmoud

2012-10-01

Current topical treatments for onychomycosis are unsatisfactory. New topical agents that offer efficacy without the potential adverse effects of oral antifungal therapy would benefit patients with this condition and encourage a greater treatment rate. Currently available topical therapies are reviewed, and new approaches for enhancing delivery of the established antifungal terbinafine through the nail are summarized. We focus on the use of ultra-deformable lipid vesicles to facilitate delivery of terbinafine to the nail and surrounding tissue. TDT 067 (terbinafine in Transfersome) is the only such therapy in development for onychomycosis, and we review published preclinical and clinical studies on this formulation. TDT 067 offers the use of new technology to deliver an established antifungal, terbinafine. Preclinical data suggest that the Transfersome accelerates entry of terbinafine released from TDT 067 into fungi and potentiates its antifungal effects, resulting in enhanced activity, compared with conventional terbinafine. This translated into high rates of mycological cure and evidence of clinical effect in a study of TDT 067 administered twice daily for 12 weeks in patients with onychomycosis. An ongoing Phase-III trial involving more than 700 patients treated for 48 weeks is investigating the efficacy and safety of TDT 067.

A bibliography on the search for extraterrestrial intelligence

NASA Technical Reports Server (NTRS)

Mallove, E. F.; Connors, M. M.; Forward, R. L.; Paprotny, Z.

1978-01-01

This report presents a uniform compilation of works dealing with the search for extraterrestrial intelligence. Entries are by first author, with cross-reference by topic index and by periodical index. This bibliography updates earlier bibliographies on this general topic while concentrating on research related to listening for signals from extraterrestrial intelligence.

Floriculture Aide.

ERIC Educational Resources Information Center

Martin, Joyce; Looney, Era

Designed for use in a self-paced, open-entry/open-exit vocational training program for a floriculture aide, this program guide is one of six for teachers of adult women offenders from a correctional institution. Module topic outlines and sample lesson plans are presented on eleven topics: occupational opportunities in the retail florist industry;…

Selected Bibliography of Egyptian Educational Materials, Vol. 2, No. 1, 1976.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

This selective annotated bibliography of Egyptian publications on education contains 126 entries on 55 topics. Publications include journal articles, books, and government documents published during 1976 or late 1975. Among the 55 topics are the following: adult education, agricultural schools, art education, child upbringing, compulsory…

Selected Bibliography of Egyptian Educational Materials, Vol. 2, No. 2, 1976.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

One hundred fourteen entries on 58 topics are contained in the selective annotated bibliography of Egyptian publications on education. Included are journal articles, books, and government documents published during 1976. Content includes the following topics: adult education, Arabic language, audiovisual aids, child upbringing, civics, economics…

Selected Bibliography of Egyptian Educational Materials, Vol. 2, No. 4, 1976.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

One hundred seventy entries on 69 topics are contained in the selective annotated bibliography of Egyptian publications on education. Included are journal articles, books, and government documents published during 1976. Content includes the following topics: Arabic language, art education, civics, commercial schools, comparative education,…

Stakeholder identification of advanced technology opportunities at international ports of entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, S.K.; Icerman, L.

As part of the Advanced Technologies for International and Intermodal Ports of Entry (ATIPE) Project, a diverse group of stakeholders was engaged to help identify problems experienced at inland international border crossings, particularly those at the US-Mexican border. The fundamental issue at international ports of entry is reducing transit time through the required documentation and inspection processes. Examples of other issues or problems, typically manifested as time delays at border crossings, repeatedly mentioned by stakeholders include: (1) lack of document standardization; (2) failure to standardize inspection processes; (3) inadequate information and communications systems; (4) manual fee and tariff collection; (5)more » inconsistency of processes and procedures; and (6) suboptimal cooperation among governmental agencies. Most of these issues can be addressed to some extent by the development of advanced technologies with the objective of allowing ports of entry to become more efficient while being more effective. Three categories of technologies were unambiguously of high priority to port of entry stakeholders: (1) automated documentation; (2) systems integration; and (3) vehicle and cargo tracking. Together, these technologies represent many of the technical components necessary for pre-clearance of freight approaching international ports of entry. Integration of vehicle and cargo tracking systems with port of entry information and communications systems, as well as existing industry legacy systems, should further enable border crossings to be accomplished consistently with optimal processing times.« less

Welfare Effects of Entry into International Markets with Licensing

NASA Astrophysics Data System (ADS)

Ferreira, F. A.; Ferreira, Fl.

2008-10-01

We study the effects of entry of a foreign firm on domestic welfare in the presence of licensing, when the entrant is technologically inferior to the incumbent. We show that foreign entry increases domestic welfare for intermediate (respectively, sufficiently large) technological differences between the firms under licensing with fixed fee (respectively, output royalty).

2014 Summer Series - Ethiraj Venkatapathy - Mary Poppins Approach to Human Mars Mission Entry, Descent and Landing

NASA Image and Video Library

2014-06-17

NASA is investing in a number of technologies to extend Entry, Descent and Landing (EDL) capabilities to enable Human Missions to Mars. These technologies will also enable robotic Science missions. Human missions will require landing payloads of 10?s of metric tons, not possible with today's technology. Decelerating from entry speeds around 15,000 miles per hour to landing in a matter of minutes will require very large drag or deceleration. The one way to achieve required deceleration is to deploy a large surface that can be stowed during launch and deployed prior to entry. This talk will highlight a simple concept similar to an umbrella. Though the concept is simple, the size required for human Mars missions and the heating encountered during entry are significant challenges. The mechanically deployable system can also enable robotic science missions to Venus and is also equally applicable for bringing back cube-satellites and other small payloads. The scalable concept called Adaptive Deployable Entry and Placement Technology (ADEPT) is under development and is the focus of this talk.

Education review: applied medical informatics--informatics in medical education.

PubMed

Naeymi-Rad, F; Trace, D; Moidu, K; Carmony, L; Booden, T

1994-05-01

The importance of informatics training within a health sciences program is well recognized and is being implemented on an increasing scale. At Chicago Medical School (CMS), the Informatics program incorporates information technology at every stage of medical education. First-year students are offered an elective in computer topics that concentrate on basic computer literacy. Second-year students learn information management such as entry and information retrieval skills. For example, during the Introduction to Clinical Medicine course, the student is exposed to the Intelligent Medical Record-Entry (IMR-E), allowing the student to enter and organize information gathered from patient encounters. In the third year, students in the Internal Medicine rotation at Norwalk Hospital use Macintosh power books to enter and manage their patients. Patient data gathered by the student are stored in a local server in Norwalk Hospital. In the final year, we teach students the role of informatics in clinical decision making. The present senior class at CMS has been exposed to the power of medical informatics tools for several years. The use of these informatics tools at the point of care is stressed.

Ames Infusion Stories for NASA Annual Technology Report: Nano Entry System for CubeSat-Class Payloads

NASA Technical Reports Server (NTRS)

Smith, Brandon; Jan, Darrell Leslie; Venkatapathy, Etiraj

2015-01-01

The Nano Entry System for CubeSat-Class Payloads led to the development of the Nano-Adaptable Deployable Entry and Placement Technology ("Nano-ADEPT"). Nano-ADEPT is a mechanically deployed entry, descent, and landing (EDL) system that stows during launch and cruise (like an umbrella) and serves as both heat shield and primary structure during EDL. It is especially designed for small spacecraft where volume is a limiting constraint.

Space shuttle orbiter avionics software: Post review report for the entry FACI (First Article Configuration Inspection). [including orbital flight tests integrated system

NASA Technical Reports Server (NTRS)

Markos, H.

1978-01-01

Status of the computer programs dealing with space shuttle orbiter avionics is reported. Specific topics covered include: delivery status; SSW software; SM software; DL software; GNC software; level 3/4 testing; level 5 testing; performance analysis, SDL readiness for entry first article configuration inspection; and verification assessment.

Does Offender Gambling on the inside Continue on the outside? Insights from Correctional Professionals on Gambling and Re-Entry

ERIC Educational Resources Information Center

Williams, D. J.; Walker, Gordon J.

2009-01-01

This study brings to light a neglected topic of particular importance--offender gambling issues within the context of re-entry into the community. Fifteen correctional professionals from Nevada (high gambling availability) and Utah (no legalized gambling) participated in semi-structured interviews to provide insights into how gambling may impact…

Uneven-aged management of old-growth spruce-fir forests: Cutting methods and stand structure goals for the initial entry

Treesearch

Robert R. Alexander; Carleton B. Edminster

1977-01-01

Topics discussed include: (1) cutting methods, (2) stand structure goals, which involve choosing a residual stocking level, selecting a maximum tree size, and establishing a diameter distribution using the "q" technique, and (3) harvesting and removal of trees. Examples illustrate how to determine realistic stand structures for the initial entry for...

Human Mars Entry, Descent and Landing Architectures Study Overview

NASA Technical Reports Server (NTRS)

Polsgrove, Tara T.; Dwyer Cianciolo, Alicia

2016-01-01

Landing humans on Mars will require entry, descent and landing (EDL) capability beyond the current state of the art. Nearly twenty times more delivered payload and an order of magnitude improvement in precision landing capability will be necessary. Several EDL technologies capable of meeting the human class payload delivery requirements are being considered. The EDL technologies considered include low lift-to-drag vehicles like Hypersonic Inflatable Aerodynamic Decelerators (HIAD), Adaptable Deployable Entry and Placement Technology (ADEPT), and mid range lift-to-drag vehicles like rigid aeroshell configurations. To better assess EDL technology options and sensitivities to future human mission design variations, a series of design studies has been conducted. The design studies incorporate EDL technologies with conceptual payload arrangements defined by the Evolvable Mars Campaign to evaluate the integrated system with higher fidelity than have been performed to date. This paper describes the results of the design studies for a lander design using the HIAD, ADEPT and rigid shell entry technologies and includes system and subsystem design details including mass and power estimates. This paper will review the point design for three entry configurations capable of delivering a 20 t human class payload to the surface of Mars.

Are we preparing the next generation of fisheries professionals to succeed in their careers?: A survey of AFS members

USGS Publications Warehouse

McMullin, Steve L.; DiCenzo, Vic; Essig, Ron; Bonds, Craig; DeBruyne, Robin L.; Kaemingk, Mark A.; Mather, Martha E.; Myrick, Christopher A.; Phelps, Quinton E.; Sutton, Trent M.; Triplett, James

2016-01-01

Natural resource professionals have frequently criticized universities for poorly preparing graduates to succeed in their jobs. We surveyed members of the American Fisheries Society to determine which job skills and knowledge of academic topics employers, students, and university faculty members deemed most important to early-career success of fisheries professionals. Respondents also rated proficiency of recently hired, entry-level professionals (employers) on how well their programs prepared them for career success (students and faculty) in those same job skills and academic topics. Critical thinking and written and oral communication skills topped the list of important skills and academic topics. Employers perceived recent entry-level hires to be less well-prepared to succeed in their careers than either university faculty or students. Entry-level hires with post-graduate degrees rated higher in proficiency for highly important skills and knowledge than those with bachelor's degrees. We conclude that although universities have the primary responsibility for developing critical thinking and basic communication skills of students, employers have equal or greater responsibility for enhancing skills of employees in teamwork, field techniques, and communicating with stakeholders. The American Fisheries Society can significantly contribute to the preparation of young fisheries professionals by providing opportunities for continuing education and networking with peers at professional conferences.

Smart Book Charts

NASA Technical Reports Server (NTRS)

Chinnapongse, Ronald L.

2015-01-01

Smart book charts for TPSM: Heatshield for Extreme Entry Environment Technology (HEEET), Conformal Ablative TPS (CA-TPS), 3D Woven Multifunctional Ablative TPS (3D MAT), and Adaptable, Deployable, Entry and Placement Technology (ADEPT).

Notes on Earth Atmospheric Entry for Mars Sample Return Missions

NASA Technical Reports Server (NTRS)

Rivell, Thomas

2006-01-01

The entry of sample return vehicles (SRVs) into the Earth's atmosphere is the subject of this document. The Earth entry environment for vehicles, or capsules, returning from the planet Mars is discussed along with the subjects of dynamics, aerodynamics, and heat transfer. The material presented is intended for engineers and scientists who do not have strong backgrounds in aerodynamics, aerothermodynamics and flight mechanics. The document is not intended to be comprehensive and some important topics are omitted. The topics considered in this document include basic principles of physics (fluid mechanics, dynamics and heat transfer), chemistry and engineering mechanics. These subjects include: a) fluid mechanics (aerodynamics, aerothermodynamics, compressible fluids, shock waves, boundary layers, and flow regimes from subsonic to hypervelocity; b) the Earth s atmosphere and gravity; c) thermal protection system design considerations; d) heat and mass transfer (convection, radiation, and ablation); e) flight mechanics (basic rigid body dynamics and stability); and f) flight- and ground-test requirements; and g) trajectory and flow simulation methods.

Heatshield for Extreme Entry Environment Technology (HEEET) for Missions to Saturn and Beyond

NASA Technical Reports Server (NTRS)

Ellerby, D.; Blosser, M.; Chinnapongse, R.; Fowler, M.; Gasch, M.; Hamm, K.; Kazemba, C.; Ma, J.; Milos, F.; Nishioka, O.;

Heatshield for Extreme Entry Environment Technology (HEEET) - Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.;

Heatshield for Extreme Entry Environment Technology (HEEET) Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Ellerby, D.; Beerman, A.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzaes, G.;

Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status for NF Missions

NASA Technical Reports Server (NTRS)

Ellerby, D.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Hamm, K.;

Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status

NASA Technical Reports Server (NTRS)

Ellerby, D.; Boghozian, T.; Driver, D.; Chavez-Garcia, J.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Kazemba, C.; Kellermann, C.;

Study of advanced atmospheric entry systems for Mars

NASA Technical Reports Server (NTRS)

1978-01-01

Entry system designs are described for various advanced Mars missions including sample return, hard lander, and Mars airplane. The Mars exploration systems for sample return and the hard lander require decleration from direct approach entry velocities of about 6 km/s to terminal velocities consistent with surface landing requirements. The Mars airplane entry system is decelerated from orbit at 4.6 km/s to deployment near the surface. Mass performance characteristics of major elements of the Mass performance characteristics are estimated for the major elements of the required entry systems using Viking technology or logical extensions of technology in order to provide a common basis of comparison for the three entry modes mission mode approaches. The entry systems, although not optimized, are based on Viking designs and reflect current hardware performance capability and realistic mass relationships.

National Association for Research in Science Teaching. 50th Annual Meeting, Abstracts of Presented Papers.

ERIC Educational Resources Information Center

Helgeson, Stanley L., Ed.

This publication provides abstracts of papers presented at the 50th annual meeting of the National Association for Research in Science Teaching held in Cincinnati, Ohio March 22-24, 1977. The entries represent a wide range of topics in the field of science education. Topics include instruction, teacher education, learning, enrollments, concept…

Orientation to Health Aide Careers Mini-Course & Home Health Aide Course.

ERIC Educational Resources Information Center

Novak, Kathy; And Others

Designed for use in a self-paced, open-entry/open-exit vocational training program for home health aides, this program guide is one of six for teachers of adult women offenders from a correctional institution. Module topic outlines are presented on eight topics: your career as a health aide; maintaining health; recognizing illness; positioning and…

Marconi to McLuhan: A Select Biliography of N. Y. Times Sunday Magazine Articles on Communication, 1900-1980.

ERIC Educational Resources Information Center

Flannery, Gerald V., Comp.

Containing over 1,800 entries, this index to articles appearing in the "New York Times Sunday Magazine," is arranged by year (1900-1980), by author, decades, and general topic (radio, rhetoric, film). Among the topics covered are newspapers, music, theatre, telegraph, wireless, telephone, photography, public relations, advertising,…

Management of oral Graft versus Host Disease with topical agents: A systematic review

PubMed Central

Khan, Zahid; Poveda, Ana; Higham, Jonathan; Richards, Andrea; Monteiro, Luis; Jané-Salas, Enric; Lopez-Lopez, José; Warnakulasuriya, Saman

2016-01-01

Background Oral Graft-versus-Host Disease (oGvHD) is a common complication of haematopoietic stem cell transplantation. Choosing the right topical application to be used intra orally can be a challenge. Consequently, the aim of this work is to review the effectiveness and safety of topical agents currently used in the management of the inflammatory mucosal lesions encountered in oGVHD. Material and Methods We carried out electronic searches of publications up to May 2015 of the databases Pubmed, National Library of Medicine’s Medline, Embase and the Cochrane Central Register of Controlled Clinical trials to identify potentially relevant studies (keywords: “oral”, “graft”, “versus”, “host”, “disease” and “treatment”). The main inclusion criterion was the reported use of a topical agent which was not intentionally swallowed when used for the treatment of oGVHD. A 3-point grading system, described by the Swedish Council on Technology Assessment in Health Care and the Centre for Reviews and Dissemination, University of York, was used to rate the methodological quality of the papers. Results From the 902 entries identified in the search, 7 studies qualifying for inclusion were analysed. Overall, there is limited evidence with regards to the effectiveness of topical steroids for oGVHD. However, the studies showed some effect of Budesonide alone and when combined with dexamethasone. Topical tacrolimus also appears to have some effect and clobetasol propionate mouthwash had a significantly better clinical response than dexamethasone mouthwash in treating oGVHD. Conclusions As the number of clinical trials conducted is limited, there is little evidence to support the use of topical therapies to treat the inflammatory mucosal lesions found in oGVHD. High quality randomised control trials are needed in order to measure the effectiveness of any topical application for the treatment of the inflammatory mucosal lesions found in oGVHD. Key words:Oral, graft versus host disease, topical, therapy. PMID:26615510

The state-of-the-art port of entry workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Godfrey, B.

1995-05-01

The increased demand for freight movements through international ports of entry and the signing of the North American Free Trade Agreement (NAFTA) have increased freight traffic at border ports of entry. The State-of-the-Art Port of Entry Workshop initiated a dialogue among technologists and stakeholders to explore the potential uses of technology at border crossings and to set development priorities. International ports of entry are both information and labor intensive, and there are many promising technologies that could be used to provide timely information and optimize inspection resources. Participants universally held that integration of technologies and operations is critical to improvingmore » port services. A series of Next Steps was developed to address stakeholder issues and national priorities, such as the National Transportation Policy and National Drug Policy. This report documents the views of the various stakeholders and technologists present at the workshop and outlines future directions of study.« less

A Comparison of the Perceptions of Laboratory Directors and Medical Technology Educators Toward Career-Entry Competencies for Associate and Baccalaureate Degree Laboratory Technology Graduates.

ERIC Educational Resources Information Center

Buccelli, Pamela

A study compared the perceptions of Pennsylvania laboratory directors and medical technology educators relative to career-entry competencies for associate degree medical laboratory technicians (MLTs) and baccalaureate medical technology (MT) graduates. A 55-item competency questionnaire was administered to 265 hospital laboratory directors and 40…

Technology Investments in the NASA Entry Systems Modeling Project

NASA Technical Reports Server (NTRS)

Barnhardt, Michael; Wright, Michael; Hughes, Monica

2017-01-01

The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game Changing Development (GCD) Program, is engaged in maturation of fundamental research developing aerosciences, materials, and integrated systems products for entry, descent, and landing(EDL)technologies [1]. To date, the ESM project has published over 200 papers in these areas, comprising the bulk of NASAs research program for EDL modeling. This presentation will provide an overview of the projects successes and challenges, and an assessment of future investments in EDL modeling and simulation relevant to NASAs mission

Overview of the Mars Sample Return Earth Entry Vehicle

NASA Technical Reports Server (NTRS)

Dillman, Robert; Corliss, James

2008-01-01

NASA's Mars Sample Return (MSR) project will bring Mars surface and atmosphere samples back to Earth for detailed examination. Langley Research Center's MSR Earth Entry Vehicle (EEV) is a core part of the mission, protecting the sample container during atmospheric entry, descent, and landing. Planetary protection requirements demand a higher reliability from the EEV than for any previous planetary entry vehicle. An overview of the EEV design and preliminary analysis is presented, with a follow-on discussion of recommended future design trade studies to be performed over the next several years in support of an MSR launch in 2018 or 2020. Planned topics include vehicle size for impact protection of a range of sample container sizes, outer mold line changes to achieve surface sterilization during re-entry, micrometeoroid protection, aerodynamic stability, thermal protection, and structural materials selection.

Human Mars Lander Design for NASA's Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Polsgrove, Tara; Chapman, Jack; Sutherlin, Steve; Taylor, Brian; Fabisinski, Leo; Collins, Tim; Cianciolo Dwyer, Alicia; Samareh, Jamshid; Robertson, Ed; Studak, Bill;

The importance of integumentary knowledge and skill in physical therapist entry-level education: are they prepared for practice?

PubMed

Gibbs, Karen A; Furney, Steven R

2013-01-01

Physical therapist practice is grounded in patient management principles encompassing all body systems and focuses on prevention, education, and functional outcomes. As such, management of the integumentary system crosses all practice settings, emphasizing the importance that basic integumentary content be adequately addressed during entry-level education. The purpose of this qualitative study was to compare the self-reported integumentary knowledge and skill of recent graduates to profession-determined expectations for education. Participants were 7 licensed physical therapists experienced in wound management. Semi-structured interview data were recorded, transcribed, and coded. A matrix compiling professional expectations for integumentary education was utilized to identify topics as absent, covered only briefly, or covered only during clinical rotations. Compression, vascular screening, infection, factors impacting healing, modalities, dressings, wound measurements, topicals, and sutures/staples were among the most commonly reported areas of deficiency. While integumentary care makes up a small percentage of physical therapy practice, it is a significant part of a comprehensively educated therapist. This study found participants did not perceive themselves to have received the minimum entry-level integumentary knowledge and skill deemed necessary by the profession. Study results are supported by current literature and demonstrate the need for integumentary curriculum review in entry-level programs.

Instrumentation Development for Large Scale Hypersonic Inflatable Aerodynamic Decelerator Characterization

NASA Technical Reports Server (NTRS)

Swanson, Gregory T.; Cassell, Alan M.

2011-01-01

Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology is currently being considered for multiple atmospheric entry applications as the limitations of traditional entry vehicles have been reached. The Inflatable Re-entry Vehicle Experiment (IRVE) has successfully demonstrated this technology as a viable candidate with a 3.0 m diameter vehicle sub-orbital flight. To further this technology, large scale HIADs (6.0 8.5 m) must be developed and tested. To characterize the performance of large scale HIAD technology new instrumentation concepts must be developed to accommodate the flexible nature inflatable aeroshell. Many of the concepts that are under consideration for the HIAD FY12 subsonic wind tunnel test series are discussed below.

Nano Entry System for CubeSat-Class Payloads Project (Nano-ADEPT)

NASA Technical Reports Server (NTRS)

Smith, Brandon Patrick

2014-01-01

This project is developing a mechanically deployed system through a mission application study, deployment/ejection testing, and wind tunnel testing. Adaptable Deployable Entry and Placement Technology (ADEPT) has been under development at NASA since 2011. Nano-ADEPT is the application of this revolutionary entry technology for small spacecraft. The unique capability of ADEPT for small science payloads comes from its ability to stow within a slender volume and deploy passively to achieve a mass-efficient drag surface with a high heat rate capability. Near-term applications for this technology include return of small science payloads or CubeSat technology from Low Earth Orbit (LEO) and delivery of secondary payloads to the surface of Mars.

Entry, Descent, and Landing Technology Concept Trade Study for Increasing Payload Mass to the Surface of Mars

NASA Technical Reports Server (NTRS)

Cruz, Juan R.; Cianciolo, Alicia D.; Powell, Richard W.; Simonsen, Lisa C.; Tolson, Robert H.

2005-01-01

A trade study was conducted that compared various entry, descent, and landing technologies and concepts for placing an 1,800 kg payload on the surface of Mars. The purpose of this trade study was to provide data, and make recommendations, that could be used in making decisions regarding which new technologies and concepts should be pursued. Five concepts were investigated, each using a different combination of new technologies: 1) a Baseline concept using the least new technologies, 2) Aerocapture and Entry from Orbit, 3) Inflatable Aeroshell, 4) Mid L/D Aeroshell-A (high ballistic coefficient), and 5) Mid L/D Aeroshell-B (low ballistic coefficient). All concepts were optimized to minimize entry mass subject to a common set of key requirements. These key requirements were: A) landing a payload mass of 1,800 kg, B) landing at an altitude 2.5 km above the MOLA areoid, C) landing with a descent rate of 2.5 m/s, and D) using a single launch vehicle available within the NASA Expendable Launch Vehicle Contract without resorting to in-space assembly. Additional constraints were implemented, some common to all concepts and others specific to the new technologies used. Among the findings of this study are the following observations. Concepts using blunt-body aeroshells (1, 2, and 3 above) had entry masses between 4,028 kg and 4,123 kg. Concepts using mid L/D aeroshells (4 and 5 above) were significantly heavier with entry masses of 5,292 kg (concept 4) and 4,812 kg (concept 5). This increased weight was mainly due to the aeroshell. Based on a comparison of the concepts it was recommended that: 1) re-qualified and/or improved TPS materials be developed, 2) large subsonic parachutes be qualified. Aerocapture was identified as a promising concept, but system issues beyond the scope of this study need to be investigated. Inflatable aeroshells were identified as a promising new technology, but they require additional technology maturation work. For the class of missions investigated in this trade study, mid L/D aeroshells were not competitive on an entry mass basis as compared to blunt-body aeroshells.

Adaptable, Deployable Entry and Placement Technology (ADEPT) for Future Mars Missions

NASA Technical Reports Server (NTRS)

Wercinski, P.; Venkatapathy, E.; Gage, P.; Prabhu, D.; Smith, B.; Cassell, A.; Yount, B.; Allen, G.

2013-01-01

The concept of a mechanically deploy- able hypersonic decelerator, developed initially for high mass (40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets.

Heat Shield for Extreme Entry Environment Technology (HEEET)

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj

2017-01-01

The Heat Shield for Extreme Entry Environment Technology (HEEET) project seeks to mature a game changing Woven Thermal Protection System (TPS) technology to enable in situ robotic science missions recommended by the NASA Research Council Planetary Science Decadal Survey committee. Recommended science missions include Venus probes and landers; Saturn and Uranus probes; and high-speed sample return missions.

Entry, Descent and Landing Systems Analysis: Exploration Class Simulation Overview and Results

NASA Technical Reports Server (NTRS)

DwyerCianciolo, Alicia M.; Davis, Jody L.; Shidner, Jeremy D.; Powell, Richard W.

2010-01-01

NASA senior management commissioned the Entry, Descent and Landing Systems Analysis (EDL-SA) Study in 2008 to identify and roadmap the Entry, Descent and Landing (EDL) technology investments that the agency needed to make in order to successfully land large payloads at Mars for both robotic and exploration or human-scale missions. The year one exploration class mission activity considered technologies capable of delivering a 40-mt payload. This paper provides an overview of the exploration class mission study, including technologies considered, models developed and initial simulation results from the EDL-SA year one effort.

Broad advances in understanding HIV resistance to antiretrovirals: report on the XVII International HIV Drug Resistance Workshop.

PubMed

Mascolini, Mark; Larder, Brendan A; Boucher, Charles A B; Richman, Douglas D; Mellors, John W

2008-01-01

The 2008 International HIV Drug Resistance Workshop explored six topics on viral resistance: new antiretrovirals; clinical implications; epidemiology; new technologies and interpretations; HIV pathogenesis, fitness, and resistance; and mechanisms of resistance. The last of these topics provided a forum for new work on resistance of hepatitis B and C viruses, which were also explored in two poster sessions. Much work focused on resistance to the two most recent antiretroviral classes (integrase inhibitors and CCR5 antagonists), a new set of entry inhibitor candidates and one new class represented by the maturation inhibitor bevirimat. Other research explored two novel non-nucleoside reverse transcriptase inhibitors, etravirine and IDX899. Epidemiological work analysed rates of transmitted resistant virus, multiclass resistance in antiretroviral-experienced patients and a heightened resistance risk in injecting drug users regardless of adherence. New research on resistance technologies involved an enhanced assay for HIV-1 coreceptor determination and improved gene-based tools for predicting coreceptor use. In the pathogenesis arena, a small study of intensification shed light on the likely source of residual viraemia in patients on successful antiretroviral therapy. A large study in Mozambique correlated the timing of infant infection with selection, transmission and persistence of nevirapine resistance mutations. Mechanistic research explored resistance to the integrase inhibitor raltegravir, K65R-mediated resistance to tenofovir and the role of connection domain mutations in resistance to zidovudine.

Organizations and Associations.

ERIC Educational Resources Information Center

Cole, Leslie

2002-01-01

This section of "Educational Media and Technology Yearbook" includes annotated entries for associations and organizations, most of which are headquartered in North America, whose interests are in some manner significant to the fields of instructional technology and educational media. Entries are separated into sections for the United…

Atmospheric Entry Studies for Uranus

NASA Astrophysics Data System (ADS)

Agrawal, P.; Allen, G. A.; Hwang, H. H.; Marley, M. S.; McGuire, M. K.; Garcia, J. A.; Sklyanskiy, E.; Huynh, L. C.; Moses, R. W.

2014-06-01

To better understand the technology requirements for a Uranus atmospheric entry probe, an internal NASA study funded by ISPT program was conducted. The talk describes two different approaches to the planet: 1) direct ballistic entry and 2) Aerocapture.

The restructuring and future of {open_quotes}Mendelian Inheritance in Man{close_quotes} (MIM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pearson, P.L.; Francomano, C.; Antonarakis, S.

1994-09-01

Victor McKusick`s catalog {open_quotes}Mendelian Inheritance in Man{close_quotes} represents the most comprehensive compendum of human genetic disease information available today and has appeared as a series in book form for the last 30 years. The 11th edition will contain almost 7000 entries: approximately 2800 descriptions of human genetic disorders, 700 combined disorder/gene descriptions and 3500 pure gene descriptions. Until recently the content of the catalogs was maintained solely by McKusick with a support staff. However, a distributed editing system has now been established with the following primary components. New entries are initiated in Baltimore by science writers under the guidance ofmore » the senior editors and McKusick, following which the information is made immediately available to the public through online access. The subject editors can then review and edit the new or modified information without impeding the timeliness of entering new information. Entries are being reconstructured so that clinical disorder and gene information is divided into separate entries which will better represent the frequently complex relationship of gene mutations to individual clinical disorders in the data files. Further, each entry is being subdivided into logical topics which will enhance the power of electronic searching, making links between topics and improving readability. The old division of entries into autosomal dominant and recessive, etc., is being abandoned in favor of clinical disorder (phenotypes) and gene catalogs. The information is maintained in an SGML format which facilitates the production of many different types of output varying from the traditional book form to CD ROMs and various online formats including IRx, WAIS, Gopher and World Wide Web. This latter offers the exciting possibility of making hypertext links between entries and other data resources, including photographic, sound and video clips as part of the total MIM information.« less

The IXV experience, from the mission conception to the flight results

NASA Astrophysics Data System (ADS)

Tumino, G.; Mancuso, S.; Gallego, J.-M.; Dussy, S.; Preaud, J.-P.; Di Vita, G.; Brunner, P.

2016-07-01

The atmospheric re-entry domain is a cornerstone of a wide range of space applications, ranging from reusable launcher stages developments, robotic planetary exploration, human space flight, to innovative applications such as reusable research platforms for in orbit validation of multiple space applications technologies. The Intermediate experimental Vehicle (IXV) is an advanced demonstrator which has performed in-flight experimentation of atmospheric re-entry enabling systems and technologies aspects, with significant advancements on Europe's previous flight experiences, consolidating Europe's autonomous position in the strategic field of atmospheric re-entry. The IXV mission objectives were the design, development, manufacturing, assembling and on-ground to in-flight verification of an autonomous European lifting and aerodynamically controlled reentry system, integrating critical re-entry technologies at system level. Among such critical technologies of interest, special attention was paid to aerodynamic and aerothermodynamics experimentation, including advanced instrumentation for aerothermodynamics phenomena investigations, thermal protections and hot-structures, guidance, navigation and flight control through combined jets and aerodynamic surfaces (i.e. flaps), in particular focusing on the technologies integration at system level for flight, successfully performed on February 11th, 2015.

78 FR 76152 - Agency Information Collection Activities: Transportation Entry and Manifest of Goods Subject to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-16

... Activities: Transportation Entry and Manifest of Goods Subject to CBP Inspection and Permit AGENCY: U.S... the Paperwork Reduction Act: Transportation Entry and Manifest of Goods Subject to CBP Inspection and..., mechanical, or other technological techniques or other forms of information. Title: Transportation Entry and...

Communications Blackout Predictions for Atmospheric Entry of Mars Science Laboratory

NASA Technical Reports Server (NTRS)

Morabito, David D.; Edquist, Karl

2005-01-01

The Mars Science Laboratory (MSL) is expected to be a long-range, long-duration science laboratory rover on the Martian surface. MSL will provide a significant milestone that paves the way for future landed missions to Mars. NASA is studying options to launch MSL as early as 2009. MSL will be the first mission to demonstrate the new technology of 'smart landers', which include precision landing and hazard avoidance in order to -land at scientifically interesting sites that would otherwise be unreachable. There are three elements to the spacecraft; carrier (cruise stage), entry vehicle, and rover. The rover will have an X-band direct-to-Earth (DTE) link as well as a UHF proximity link. There is also a possibility of an X-band proximity link. Given the importance of collecting critical event telemetry data during atmospheric entry, it is important to understand the ability of a signal link to be maintained, especially during the period near peak convective heating. The received telemetry during entry (or played back later) will allow for the performance of the Entry-Descent-Landing technologies to be assessed. These technologies include guided entry for precision landing, hazard avoidance, a new sky-crane landing system and powered descent. MSL will undergo an entry profile that may result in a potential communications blackout caused by ionized plasma for short periods near peak heating. The vehicle will use UHF and possibly X-band during the entry phase. The purpose of this report is to quantify or bound the likelihood of any such blackout at UHF frequencies (401 MHz) and X-band frequencies (8.4 GHz). Two entry trajectory scenarios were evaluated: a stressful entry trajectory to quantify an upper-bound for any possible blackout period, and a nominal likely trajectory to quantify likelihood of blackout for such cases.

An evaluation of the success of a surgical resident learning portfolio.

PubMed

Webb, Travis P; Merkley, Taylor R

2012-01-01

Learning portfolios have gained modest acceptance in graduate medical education because of challenges related to user satisfaction, time and resource commitment, and quality assessment. In 2001, the Department of Surgery implemented the Surgical Learning and Instructional Portfolio (SLIP) to help residents develop a case-based portfolio demonstrating practice-based learning. In 2008, the format was changed to a Web-based platform with open viewing of portfolios for all learners. This study was performed to evaluate the SLIP program using resident and faculty perspectives in the domains of satisfaction, compliance, and educational value. Likert scale surveys were distributed to residents to assess satisfaction. Using a semistructured format with subsequent qualitative analysis of the meeting transcript, a focus group discussion was held with the SLIP director, SLIP facilitator, and program coordinator. An analysis of the program compliance was performed by review of SLIP entry dates. Finally, the quality of the SLIP entries (n = 420) was analyzed in a blinded manner using a locally developed standardized SLIP assessment tool. Data analysis was performed using Pearson's correlation and Cronbach's alpha. Residents were satisfied with the program and felt the Web-based format promoted self-reflection. They perceived that time spent was appropriate. Residents also believed they gained medical knowledge of their own specific entry topics but did not learn routinely from others' entries. Faculty asserted that the Web-based platform eased the administrative burden but did not necessarily alter the quality of the SLIP entries. Compliance with the assignment was 100%. SLIP entry analysis demonstrated the reflection and understanding of the topics chosen. However, the overall quality assessment of entries was hindered by suboptimal interrater reliability (inter-rater reliability (IR) = 0.636). The SLIP program allows residents to demonstrate practice-based learning and improvement of medical knowledge. The Web-based format provides transparency and ease of administration. Quality assessment of individual portfolio entries remains a challenge to the widespread adoption of portfolios. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Adaptable, Deployable Entry and Placement Technology (ADEPT) Overview of FY15 Accomplishments

NASA Technical Reports Server (NTRS)

Wercinski, P.; Brivkalns, C.; Cassell, A.; Chen, Y.-K.; Boghozian, T.; Chinnapongse, R.; Gasch, M.; Kruger, C.; Makino, A.; Milos, F.;

Nutrition Update, 1978.

ERIC Educational Resources Information Center

Weininger, Jean; Briggs, George M.

1978-01-01

Reviews current nutrition research areas with important practical applications. Topics include hypertension, preventable birth defects, phenylketonuria and genetic diseases, new molecular genetics techniques, and saccharin and sweetners. Entries are brief and a 65-reference list is given. (MA)

Licensing in an International Market

NASA Astrophysics Data System (ADS)

Ferreira, Fernanda A.

2008-09-01

We study the effects of entry of a foreign firm on domestic welfare in the presence of licensing, when the entrant is technologically superior to the incumbent. We show that foreign entry increases domestic welfare for sufficiently large technological differences between the firms under both fixed-fee licensing and royalty licensing.

Development of Inflatable Entry Systems Technologies

NASA Technical Reports Server (NTRS)

Player, Charles J.; Cheatwood, F. McNeil; Corliss, James

2005-01-01

Achieving the objectives of NASA s Vision for Space Exploration will require the development of new technologies, which will in turn require higher fidelity modeling and analysis techniques, and innovative testing capabilities. Development of entry systems technologies can be especially difficult due to the lack of facilities and resources available to test these new technologies in mission relevant environments. This paper discusses the technology development process to bring inflatable aeroshell technology from Technology Readiness Level 2 (TRL-2) to TRL-7. This paper focuses mainly on two projects: Inflatable Reentry Vehicle Experiment (IRVE), and Inflatable Aeroshell and Thermal Protection System Development (IATD). The objectives of IRVE are to conduct an inflatable aeroshell flight test that demonstrates exoatmospheric deployment and inflation, reentry survivability and stability, and predictable drag performance. IATD will continue the development of the technology by conducting exploration specific trade studies and feeding forward those results into three more flight tests. Through an examination of these projects, and other potential projects, this paper discusses some of the risks, issues, and unexpected benefits associated with the development of inflatable entry systems technology.

STS-114: Discovery Day 13 Mission Status Briefing

NASA Technical Reports Server (NTRS)

2005-01-01

LeRoy Cain, STS-114 Ascent/Entry Flight Director, takes a solo stand with the Press in this briefing. He reports that the vehicle is in good shape, consumable status is excellent, and the shuttle crew is in high spirits and preparing for de-orbit and landing. LeRoy and his team have completed the entry system check up, flight control check up, reactor control system check up, and noted that all are at nominal performance; weather forecast is very good, the Entry team is ready and looking forward to de-orbit and landing at the Kennedy Space Center on Monday, August 8th. Re-entry, personal feelings, Columbia accident, data gathering, consumable situation, back up sites, weather, communication block out, night and day landing, and Commander Collin's piloting skills during night flight are some of the topics covered with the News media.

Publications of the Jet Propulsion Laboratory, 1977. [NASA research and development

NASA Technical Reports Server (NTRS)

1978-01-01

This bibliography cites 900 externally distributed technical reports released during calendar year 1977, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. Report topics cover 81 subject areas related in some way to the various NASA programs. The publications are indexed by: (1) author, (2) subject, and (3) publication type and number. A descriptive entry appears under the name of each author of each publication; an abstract is included with the entry for the primary (first-listed) author.

Aerothermodynamics of Blunt Body Entry Vehicles. Chapter 3

NASA Technical Reports Server (NTRS)

Hollis, Brian R.; Borrelli, Salvatore

2011-01-01

In this chapter, the aerothermodynamic phenomena of blunt body entry vehicles are discussed. Four topics will be considered that present challenges to current computational modeling techniques for blunt body environments: turbulent flow, non-equilibrium flow, rarefied flow, and radiation transport. Examples of comparisons between computational tools to ground and flight-test data will be presented in order to illustrate the challenges existing in the numerical modeling of each of these phenomena and to provide test cases for evaluation of Computational Fluid Dynamics (CFD) code predictions.

Aerothermodynamics of blunt body entry vehicles

NASA Astrophysics Data System (ADS)

Hollis, Brian R.; Borrelli, Salvatore

2012-01-01

In this chapter, the aerothermodynamic phenomena of blunt body entry vehicles are discussed. Four topics will be considered that present challenges to current computational modeling techniques for blunt body environments: turbulent flow, non-equilibrium flow, rarefied flow, and radiation transport. Examples of comparisons between computational tools to ground and flight-test data will be presented in order to illustrate the challenges existing in the numerical modeling of each of these phenomena and to provide test cases for evaluation of computational fluid dynamics (CFD) code predictions.

An Interim Report on NASA's Draft Space Technology Roadmaps

NASA Technical Reports Server (NTRS)

2011-01-01

NASA has developed a set of 14 draft roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist (OCT). Each of these roadmaps focuses on a particular technology area (TA). The roadmaps are intended to foster the development of advanced technologies and concepts that address NASA's needs and contribute to other aerospace and national needs. OCT requested that the National Research Council conduct a study to review the draft roadmaps, gather and assess relevant community input, and make recommendations and suggest priorities to inform NASA's decisions as it finalizes its roadmaps. The statement of task states that "based on the results of the community input and its own deliberations, the steering committee will prepare a brief interim report that addresses high-level issues associated with the roadmaps, such as the advisability of modifying the number or technical focus of the draft NASA roadmaps." This interim report, which does not include formal recommendations, addresses that one element of the study charge. NASA requested this interim report so that it would have the opportunity to make an early start in modifying the draft roadmaps based on feedback from the panels and steering committee. The final report will address all other tasks in the statement of task. In particular, the final report will include a prioritization of technologies, will describe in detail the prioritization process and criteria, and will include specific recommendations on a variety of topics, including many of the topics mentioned in this interim report. In developing both this interim report and the final report to come, the steering committee draws on the work of six study panels organized by technical area, loosely following the organization of the 14 roadmaps, as follows: A Panel 1: Propulsion and Power TA01 Launch Propulsion Systems TA02 In-Space Propulsion Technologies TA03 Space Power and Energy Storage Systems TA13 Ground and Launch Systems Processing B Panel 2: Robotics, Communications, and Navigation TA04 Robotics, TeleRobotics, and Autonomous Systems TA05 Communication and Navigation Systems C Panel 3: Instruments and Computing TA08 Science Instruments, Observatories, and Sensor Systems TA11 Modeling, Simulation, Information Technology, and Data Processing D Panel 4: Human Health and Surface Exploration TA06 Human Health, Life Support, and Habitation Systems TA07 Human Exploration Destination Systems E Panel 5: Materials Panel TA10 Nanotechnology TA12 Materials, Structures, Mechanical Systems, and Manufacturing TA14 Thermal Management Systems F Panel 6: Entry, Descent, and Landing Panel TA09 Entry, Descent, and Landing Systems In addition to drawing on the expertise represented on the steering committee and panels, the committee obtained input from each of 14 public workshops held on each of the 14 roadmaps. At these 1-day workshops, invited speakers, guests, and members of the public engaged in discussions on the different technology areas and their value to NASA. Broad community input was also solicited from a public website, where more than 240 public comments were received on the draft roadmaps in response to application of criteria (such as benefit, risk and reasonableness, and alignment with NASA and national goals) that the steering committee established. This interim report reflects the results of deliberations by the steering committee in light of these public inputs as well as additional inputs from the six panels. The steering committee's final report will be completed early in 2012. That report will prioritize the technologies that span the entire scope of the 14 roadmaps and provide additional guidance on crosscutting themes and other relevant topics.

Development of Supersonic Retro-Propulsion for Future Mars Entry, Descent, and Landing Systems

NASA Technical Reports Server (NTRS)

Edquist, Karl T.; Dyakonov, Artem A.; Shidner, Jeremy D.; Studak, Joseph W.; Tiggers, Michael A.; Kipp, Devin M.; Prakash, Ravi; Trumble, Kerry A.; Dupzyk, Ian C.; Korzun, Ashley M.

2010-01-01

Recent studies have concluded that Viking-era entry system technologies are reaching their practical limits and must be succeeded by new methods capable of delivering large payloads (greater than 10 metric tons) required for human exploration of Mars. One such technology, termed Supersonic Retro-Propulsion, has been proposed as an enabling deceleration technique. However, in order to be considered for future NASA flight projects, this technology will require significant maturation beyond its current state. This paper proposes a roadmap for advancing the component technologies to a point where Supersonic Retro-Propulsion can be reliably used on future Mars missions to land much larger payloads than are currently possible using Viking-based systems. The development roadmap includes technology gates that are achieved through testing and/or analysis, culminating with subscale flight tests in Earth atmosphere that demonstrate stable and controlled flight. The component technologies requiring advancement include large engines capable of throttling, computational models for entry vehicle aerodynamic/propulsive force and moment interactions, aerothermodynamic environments modeling, entry vehicle stability and control methods, integrated systems engineering and analyses, and high-fidelity six degree-of-freedom trajectory simulations. Quantifiable metrics are also proposed as a means to gage the technical progress of Supersonic Retro-Propulsion. Finally, an aggressive schedule is proposed for advancing the technology through sub-scale flight tests at Earth by 2016.

The Status of Spacecraft Bus and Platform Technology Development under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Glaab, Louis; Peterson, Todd

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System and ultralightweight propellant tank technologies. Future directions for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV); and 3) electric propulsion. These technologies are more vehicles and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These inspace propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

The status of spacecraft bus and platform technology development under the NASA ISPT program

NASA Astrophysics Data System (ADS)

Anderson, D. J.; Munk, M. M.; Pencil, E.; Dankanich, J.; Glaab, L.; Peterson, T.

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA's Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN& C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System and ultra-lightweight propellant tank technologies. Future directions for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV); and 3) electric propulsion. These technologies are more vehicles and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicabilit- to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

The Status of Spacecraft Bus and Platform Technology Development Under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Glaab, Louis; Peterson, Todd

2014-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems Mission Analysis. ISPTs propulsion technologies include: 1) NASAs Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; 2) a Hall-effect electric propulsion (HEP) system for sample return and low cost missions; 3) the Advanced Xenon Flow Control System (AXFS); ultra-lightweight propellant tank technologies (ULTT); and propulsion technologies for a Mars Ascent Vehicle (MAV). The AXFS and ULTT are two component technologies being developed with nearer-term flight infusion in mind, whereas NEXT and the HEP are being developed as EP systems. ISPTs entry vehicle technologies are: 1) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GNC) models of blunt-body rigid aeroshells; and aerothermal effect models; and 2) Multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions. The Systems Mission Analysis area is focused on developing tools and assessing the application of propulsion, entry vehicle, and spacecraft bus technologies to a wide variety of mission concepts. Several of the ISPT technologies are related to sample return missions and other spacecraft bus technology needs like: MAV propulsion, MMEEV, and electric propulsion. These technologies, as well as Aerocapture, are more vehicle and mission-focused, and present a different set of technology development challenges. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

The Status of Spacecraft Bus and Platform Technology Development Under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric J.; Dankanich, John; Glaab, Louis J.

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance 2) NASAs Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future direction for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV) 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) and 3) electric propulsion. These technologies are more vehicle and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

Development of FIAT-Based Parametric Thermal Protection System Mass Estimating Relationships for NASA's Multi-Mission Earth Entry Concept

NASA Technical Reports Server (NTRS)

Sepka, Steven A.; Zarchi, Kerry; Maddock, Robert W.; Samareh, Jamshid A.

2013-01-01

Part of NASAs In-Space Propulsion Technology (ISPT) program is the development of the tradespace to support the design of a family of multi-mission Earth Entry Vehicles (MMEEV) to meet a wide range of mission requirements. An integrated tool called the Multi Mission System Analysis for Planetary Entry Descent and Landing or M-SAPE tool is being developed as part of Entry Vehicle Technology project under In-Space Technology program. The analysis and design of an Earth Entry Vehicle (EEV) is multidisciplinary in nature, requiring the application many disciplines. Part of M-SAPE's application required the development of parametric mass estimating relationships (MERs) to determine the vehicle's required Thermal Protection System (TPS) for safe Earth entry. For this analysis, the heat shield was assumed to be made of a constant thickness TPS. This resulting MERs will then e used to determine the pre-flight mass of the TPS. Two Mers have been developed for the vehicle forebaody. One MER was developed for PICA and the other consisting of Carbon Phenolic atop an Advanced Carbon-Carbon composition. For the the backshell, MERs have been developed for SIRCA, Acusil II, and LI-900. How these MERs were developed, the resulting equations, model limitations, and model accuracy are discussed in this poster.

Integrated Design System (IDS) Tools for the Spacecraft Aeroassist/Entry Vehicle Design Process

NASA Technical Reports Server (NTRS)

Olynick, David; Braun, Robert; Langhoff, Steven R. (Technical Monitor)

1997-01-01

The definition of the Integrated Design System technology focus area as presented in the NASA Information Technology center of excellence strategic plan is described. The need for IDS tools in the aeroassist/entry vehicle design process is illustrated. Initial and future plans for spacecraft IDS tool development are discussed.

NASA In-Space Propulsion Technologies and Their Infusion Potential

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil,Eric J.; Peterson, Todd; Vento, Daniel; Munk, Michelle M.; Glaab, Louis J.; Dankanich, John W.

2012-01-01

The In-Space Propulsion Technology (ISPT) program has been developing in-space propulsion technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (Electric and Chemical), Entry Vehicle Technologies (Aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies that will be ready for flight infusion in the near future will be Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future focuses for ISPT are sample return missions and other spacecraft bus technologies like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions; and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle-focused, and present a different set of technology infusion challenges. While the Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

The Secret of Guided Missile Re-Entry,

DTIC Science & Technology

1986-06-25

I RD-PAI169 598 THE SECRET OF GUIDED MISSILE RE-ENTRY(U) FOREIGN / I TECHNOLOGY DIV NRIGHT-PATTERSON RFB OH J CHEN ET AL. I 25 JUN 96 FTD-ID(RS)T...TECHNOLOGY DIVISION THE SECRET OF GUIDED MISSILE RE-ENTRY by Chen Jingzhong, An Sehua J L 0 7 ’:;85’ ’ 0 *Approved for public release; Distribution...unlimite t d. :. 86 7 034.. FTD- ID(RS)T-0459-86 HUMAN TRANSLATION FTD-ID(RS)T-0459-86 25 June 1986 MICROFICHE NR: F - - 0Q 9? THE SECRET OF GUIDED

Law and politics in outer space: A bibliography.

NASA Technical Reports Server (NTRS)

White, I. L.; Wilson, C. E.; Vosburgh, J. A.

1972-01-01

The materials are categorized by specific topics and by types of materials. The sources are books, articles, reports, United Nations materials, U.S. Government documents, etc. Books are listed by geographical areas, and articles are divided into what are considered to be the major space topics. Book and article sections are also divided into English and foreign language entries. A bibliographical essay introduces the literature to those unacquainted with law and politics of outer space.

BOOK REVIEW: The Complete A-Z Physics Handbook, Second Edition

NASA Astrophysics Data System (ADS)

Breithaupt, Jim

2000-11-01

The first edition of this book was published in 1997 and reviewed in Physics Education in March 1988. This second edition is 13 pages longer and contains a significant number of new entries, mostly in particle physics and astrophysics, to match the latest AS/A-level specifications. Some entries on topics such as surface tension that were removed from previous AS/A-level syllabuses have now been deleted. The revised book thus provides an effective alphabetical guide to key terms used in the latest AS/A-level specifications as most AS/A-level core terms are included, apart from terms for some of the new topics such as image processing in the new IOP AS/A-level specification. The style of the second edition is the same as the first, each entry commencing with the key term in bold print followed by an explanation of the term, accompanied by the relevant equation and/or a simple diagram where appropriate. Cross-references are given in italics. For example, the entry under quarks (which is one of the new entries) lists the six quarks and their characteristic properties in bullet point format then follows up with the information about the quark composition of baryons and mesons, giving the composition of the proton, the neutron and the pions as examples. The change of quark composition due to beta decay is mentioned with a cross-reference to beta decay. Other cross-references link to entries on the proton, the neutron and the four fundamental interactions. Lengthy entries such as the photoelectric effect each cover several pages, thus providing opportunities for in-depth revision. Useful theme entries provided in the first edition have been retained and referred to in a new two-page appendix on preparing for synoptic questions. Some proofs are provided such as the proof of the kinetic theory equation. Some experiments are described, each under an appropriate entry. Technically, the entries are reasonably accurate and usually expressed in appropriate and familiar language. The book ends with the same appendices as in the first edition (units, formulae, physical constants, examiners' terms, a suggested revision list and notes on examination preparation) plus the two-page synoptic appendix. The second edition with its additional entries on particle physics and astrophysics should prove useful as a study guide to supplement a textbook or as a revision guide as AS or A2 examinations approach. In addition, the concise nature of many of the entries could be valuable in helping physics students sharpen their written communication skills, thereby securing marks which all too often they lose on account of inadequate answers to descriptive questions.

IXV re-entry demonstrator: Mission overview, system challenges and flight reward

NASA Astrophysics Data System (ADS)

Angelini, Roberto; Denaro, Angelo

2016-07-01

The Intermediate eXperimental Vehicle (IXV) is an advanced re-entry demonstrator vehicle aimed to perform in-flight experimentation of atmospheric re-entry enabling systems and technologies. The IXV integrates key technologies at the system level, with significant advancements on Europe's previous flying test-beds. The project builds on previous achievements at system and technology levels, and provides a unique and concrete way of establishing and consolidating Europe's autonomous position in the strategic field of atmospheric re-entry. The IXV mission and system objectives are the design, development, manufacturing, assembling and on-ground to in-flight verification of an autonomous European lifting and aerodynamically controlled reentry system, integrating critical re-entry technologies at system level. Among such critical technologies of interest, special attention is paid to aerodynamic and aerothermodynamics experimentation, including advanced instrumentation for aerothermodynamics phenomena investigations, thermal protections and hot-structures, guidance, navigation and flight control through combined jets and aerodynamic surfaces (i.e. flaps), in particular focusing on the technologies integration at system level for flight. Following the extensive detailed design, manufacturing, qualification, integration and testing of the flight segment and ground segment elements, IXV has performed a full successful flight on February 11th 2015. After the launch with the VEGA launcher form the CSG spaceport in French Guyana, IXV has performed a full nominal mission ending with a successful splashdown in the Pacific Ocean. During Flight Phase, the IXV space and ground segments worked perfectly, implementing the whole flight program in line with the commanded maneuvers and trajectory prediction, performing an overall flight of 34.400 km including 7.600 km with hot atmospheric re-entry in automatic guidance, concluding with successful precision landing at a distance of ~1 km from the target, including the wind drift acting on the parachute from an altitude of 4.5 km.

A Survey of Supersonic Retropropulsion Technology for Mars Entry, Descent, and Landing

NASA Technical Reports Server (NTRS)

Korzun, Ashley M.; Cruz, Juan R.; Braun, Robert D.

2007-01-01

This paper presents a literature survey on supersonic retropropulsion technology as it applies to Mars entry, descent, and landing (EDL). The relevance of this technology to the feasibility of Mars EDL is shown to increase with ballistic coefficient to the point that it is likely required for human Mars exploration. The use of retropropulsion to decelerate an entry vehicle from hypersonic or supersonic conditions to a subsonic velocity is the primary focus of this review. Discussed are systems-level studies, general flowfield characteristics, static aerodynamics, vehicle and flowfield stability considerations, and aerothermodynamics. The experimental and computational approaches used to develop retropropulsion technology are also reviewed. Finally, the applicability and limitations of the existing literature and current state-of-the-art computational tools to future missions are discussed in the context of human and robotic Mars exploration.

Annual Bibliography, 1998.

ERIC Educational Resources Information Center

Brown, Jo B., Comp.

1999-01-01

Classified, selected bibliography for Appalachian studies contains approximately 500 entries, published 1997-98, including books, journal articles, government documents, and dissertations. Topics include agriculture, arts and crafts, Civil War, industry and labor, economic conditions and development, education, environment, ethnicity/race,…

On the Edge of Life, I: Assessment of, Reaction to, and Management of the Terminally Ill Recorded in an Intensive Care Unit Journal

PubMed Central

Sekeres, Mikkael A.; Stern, Theodore A.

2002-01-01

Background: In a general hospital, few clinical settings match the intensity of the intensive care unit (ICU) experience. Clinical rotations in ICUs elicit and emphasize the struggles house officers face on a daily basis throughout their training. Method: These struggles were recorded by hundreds of residents in a journal maintained in the Massachusetts General Hospital's Medical ICU for the past 20 years. We systematically reviewed these unsolicited entries to define and to illustrate how house officers respond to caring for terminally ill patients. The 3 overarching topics that surfaced repeatedly were assessment of terminally ill patients, reaction to their prognosis, and management of their disease or their eventual demise. Results: House officers record affective reactions and cognitive assessments to cope with the stress and dysfunction associated with the care of the critically ill and to facilitate their management of these patients. Journal entries by residents reveal a deep concern for the welfare of their patients, conflict about the technological advances and limitations of the system, and reflection on how involved physicians should become with their patients. Conclusion: House officer journal entries reflect a combination of newly gained medical knowledge and coping strategies in managing terminally ill patients. House officers also demonstrate a deep concern for the welfare of their patients. Insight from years of reflection from past house officers can help prepare trainees and residency programs for the breadth and intensity of the ICU experience and for work in clinical practice settings that follow completion of training. PMID:15014705

76 FR 17425 - Agency Information Collection Activities: Entry of Articles for Exhibition

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-29

... Activities: Entry of Articles for Exhibition AGENCY: U.S. Customs and Border Protection, Department of... of Articles for Exhibition (19 CFR 147.11(c)). This is a proposed extension of an information... other technological techniques or other forms of information. Title: Entry of Articles for Exhibition...

TNP-assisted fascial closure in a patient with acute abdomen and abdominal compartment syndrome.

PubMed

Gourgiotis, S; Villias, C; Benetatos, C; Tsakiris, A; Parisis, C; Aloizos, S; Salemis, N S

2009-02-01

Topical negative pressure was applied to prevent abdominal compartment syndrome in a patient following surgery for an acute abdomen. It delayed fascial closure, protected the underlying bowel and facilitated abdominal re-entry.

Communication & Aging.

ERIC Educational Resources Information Center

Arnold, William E.

This extensive bibliography contains more than 1,800 entries about communication and aging. The citations include journal articles, unpublished papers, speeches, dissertations, research studies, and books that relate aging and the aged to a variety of topics, including the following: physiological deterioration, socialization, political…

Study Results on Knowledge Requirements for Entry-Level Airport Operations and Management Personnel

NASA Technical Reports Server (NTRS)

Quilty, Stephen M.

2005-01-01

This paper identifies important topical knowledge areas required of individuals employed in airport operations and management positions. A total of 116 airport managers and airfield operations personnel responded to a survey that sought to identify the importance of various subject matter for entry level airport operations personnel. The results from this study add to the body of research on aviation management curriculum development and can be used to better develop university curriculum and supplemental training focused on airport management and operations. Recommendations are made for specialized airport courses within aviation management programs. Further, this study identifies for job seekers or individuals employed in entry level positions those knowledge requirements deemed important by airport managers and operations personnel at different sized airports.

Bibliography on propulsion airframe integration technologies for high-speed civil transport applications, 1980-1991

NASA Technical Reports Server (NTRS)

Anderson, David J.; Mizukami, Masashi

1993-01-01

NASA has initiated the High Speed Research (HSR) program with the goal to develop technologies for a new generation, economically viable, environmentally acceptable, supersonic transport (SST) called the High Speed Civil Transport (HSCT). A significant part of this effort is expected to be in multidisciplinary systems integration, such as in propulsion airframe integration (PAI). In order to assimilate the knowledge database on PAI for SST type aircraft, a bibliography on this subject was compiled. The bibliography with over 1200 entries, full abstracts, and indexes. Related topics are also covered, such as the following: engine inlets, engine cycles, nozzles, existing supersonic cruise aircraft, noise issues, computational fluid dynamics, aerodynamics, and external interference. All identified documents from 1980 through early 1991 are included; this covers the latter part of the NASA Supersonic Cruise Research (SCR) program and the beginnings of the HSR program. In addition, some pre-1980 documents of significant merit or reference value are also included. The references were retrieved via a computerized literature search using the NASA RECON database system.

Information Center Complex publications and presentations, 1971-1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gill, A.B.; Hawthorne, S.W.

1981-08-01

This indexed bibliography lists publications and presentations of the Information Center Complex, Information Division, Oak Ridge National Laboratory, from 1971 through 1980. The 659 entries cover such topics as toxicology, air and water pollution, management and transportation of hazardous wastes, energy resources and conservation, and information science. Publications range in length from 1 page to 3502 pages and include topical reports, books, journal articles, fact sheets, and newsletters. Author, title, and group indexes are provided. Annual updates are planned.

Entry, Descent and Landing Systems Analysis: Exploration Feed Forward Internal Peer Review Slide Package

NASA Technical Reports Server (NTRS)

Dwyer Cianciolo, Alicia M. (Editor)

2011-01-01

NASA senior management commissioned the Entry, Descent and Landing Systems Analysis (EDL-SA) Study in 2008 to identify and roadmap the Entry, Descent and Landing (EDL) technology investments that the agency needed to successfully land large payloads at Mars for both robotic and human-scale missions. Year 1 of the study focused on technologies required for Exploration-class missions to land payloads of 10 to 50 mt. Inflatable decelerators, rigid aeroshell and supersonic retro-propulsion emerged as the top candidate technologies. In Year 2 of the study, low TRL technologies identified in Year 1, inflatables aeroshells and supersonic retropropulsion, were combined to create a demonstration precursor robotic mission. This part of the EDL-SA Year 2 effort, called Exploration Feed Forward (EFF), took much of the systems analysis simulation and component model development from Year 1 to the next level of detail.

Entry, Descent and Landing Systems Analysis Study: Phase 2 Report on Exploration Feed-Forward Systems

NASA Technical Reports Server (NTRS)

Dwyer Ciancolo, Alicia M.; Davis, Jody L.; Engelund, Walter C.; Komar, D. R.; Queen, Eric M.; Samareh, Jamshid A.; Way, David W.; Zang, Thomas A.; Murch, Jeff G.; Krizan, Shawn A.;

Heatshield for Extreme Entry Environment Technology (HEEET) Enabling Missions Beyond Heritage Carbon Phenolic

NASA Technical Reports Server (NTRS)

Stackpoole, M.; Boghozian, T.; Chavez-Garcia, J.; Ellerby, D.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Kazemba, C.; Kellermann, C.;

Impact of alternative harvesting technologies on thinning entry and optimal rotation age for eastern hardwoods

Treesearch

Chris B. LeDoux

2007-01-01

A complete system simulation model is used to integrate alternative logging technologies, stand data, market prices, transportation costs, and economic concerns in a longterm continuous manner to evaluate thinning entry timing and optimal rotation age. Forest Inventory and Analysis (FIA) stand data for the oak/hickory forest type and time and motion study data for 70,...

Outer planet atmospheric entry probes - An overview of technology readiness

NASA Technical Reports Server (NTRS)

Vojvodich, N. S.; Reynolds, R. T.; Grant, T. L.; Nachtsheim, P. R.

1975-01-01

Entry probe systems for characterizing, by in situ measurements, the atmospheric properties, chemical composition, and cloud structure of the planets Saturn, Uranus, and Jupiter are examined from the standpoint of unique mission requirements, associated subsystem performance, and degree of commonality of design. Past earth entry vehicles (PAET) and current planetary spacecraft (Pioneer Venus probes and Viking lander) are assessed to identify the extent of potential subsystem inheritance, as well as to establish the significant differences, in both form and function, relative to outer planet requirements. Recent research results are presented and reviewed for the most critical probe technology areas, including: science accommodation, telecommunication, and entry heating and thermal protection. Finally presented is a brief discussion of the use of decision analysis techniques for quantifying various probe heat-shield test alternatives and performance risk.

Orbiter entry aerothermodynamics

NASA Technical Reports Server (NTRS)

Ried, R. C.

1985-01-01

The challenge in the definition of the entry aerothermodynamic environment arising from the challenge of a reliable and reusable Orbiter is reviewed in light of the existing technology. Select problems pertinent to the orbiter development are discussed with reference to comprehensive treatments. These problems include boundary layer transition, leeward-side heating, shock/shock interaction scaling, tile gap heating, and nonequilibrium effects such as surface catalysis. Sample measurements obtained from test flights of the Orbiter are presented with comparison to preflight expectations. Numerical and wind tunnel simulations gave efficient information for defining the entry environment and an adequate level of preflight confidence. The high quality flight data provide an opportunity to refine the operational capability of the orbiter and serve as a benchmark both for the development of aerothermodynamic technology and for use in meeting future entry heating challenges.

Fibrinous iritis due to oxybuprocaine.

PubMed

Haddad, R

1989-01-01

Following minor surgery performed under topical application of oxybuprocaine (Dorsacaine, Novesin) two patients suffered from fibrinous iritis and moderate corneal swelling. We believe that this represents a toxic reaction caused by an inadvertent entry of this drug into the anterior chamber during the procedure.

Education--An Annotated Bibliography of Current Issues, July-September, 1989.

ERIC Educational Resources Information Center

Wardell, David

This annotated bibliography of newspaper and magazine articles on a wide variety of topics in education includes entries from the following publications: "Asahi Evening News,""Asian Wall Street Journal,""Daily Yomiuri,""International Herald Tribune,""Japan Times,""Mainichi Daily…

Interdisciplinary Research and Information Overload.

ERIC Educational Resources Information Center

Wilson, Patrick

1996-01-01

Discusses information overload and examines several ways in which actual and potential overload affects research choices for the solo researcher in interdisciplinary areas. Topics include information overload and teamwork; entry barriers to certain specialties, including necessary background knowledge; and information utilization and knowledge…

Development Challenges of Game-Changing Entry System Technologies From Concept to Mission Infusion

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Beck, Robin; Ellerby, Donald; Feldman, Jay; Gage, Peter; Munk, Michelle; Wercinski, Paul

2016-01-01

NASA's Space Technology Mission Directorate (STMD) and the Game Changing Development Program (GCDP) were created to develop new technologies. This paper describes four entry system technologies that are funded by the GCDP and summarizes the lessons learned during the development. The investments are already beginning to show success, mission infusion pathways after five years of existence. It is hoped that our experience and observations, drawn from projects supported by the GCD program/STMD, Orion and SMD can help current and future technology development projects. Observations on fostering a culture of success and on constraints that limit greater success are also provided.

Space and nuclear research and technology

NASA Technical Reports Server (NTRS)

1975-01-01

A fact sheet is presented on the space and nuclear research and technology program consisting of a research and technology base, system studies, system technology programs, entry systems technology, and experimental programs.

Spacecraft Bus and Platform Technology Development under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Glaab, Louis; Peterson, Todd

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance; 2) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future direction for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV); 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions; and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

Spacecraft Bus and Platform Technology Development under the NASA ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Munk, Michelle M.; Pencil, Eric J.; Dankanich, John W.; Glaab, Louis J.; Peterson, Todd T.

2013-01-01

The In-Space Propulsion Technology (ISPT) program is developing spacecraft bus and platform technologies that will enable or enhance NASA robotic science missions. The ISPT program is currently developing technology in four areas that include Propulsion System Technologies (electric and chemical), Entry Vehicle Technologies (aerocapture and Earth entry vehicles), Spacecraft Bus and Sample Return Propulsion Technologies (components and ascent vehicles), and Systems/Mission Analysis. Three technologies are ready for near-term flight infusion: 1) the high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance 2) NASAs Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system and 3) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells and aerothermal effect models. Two component technologies being developed with flight infusion in mind are the Advanced Xenon Flow Control System, and ultra-lightweight propellant tank technologies. Future direction for ISPT are technologies that relate to sample return missions and other spacecraft bus technology needs like: 1) Mars Ascent Vehicles (MAV) 2) multi-mission technologies for Earth Entry Vehicles (MMEEV) for sample return missions and 3) electric propulsion for sample return and low cost missions. These technologies are more vehicle and mission-focused, and present a different set of technology development and infusion steps beyond those previously implemented. The Systems/Mission Analysis area is focused on developing tools and assessing the application of propulsion and spacecraft bus technologies to a wide variety of mission concepts. These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, and sample return missions currently under consideration, as well as having broad applicability to potential Flagship missions. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness of in-space propulsion technologies in the areas of electric propulsion, Aerocapture, Earth entry vehicles, propulsion components, Mars ascent vehicle, and mission/systems analysis.

Stress Testing of the Philips 60W Replacement Lamp L Prize Entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poplawski, Michael E.; Ledbetter, Marc R.; Smith, Mark

2012-04-24

The Pacific Northwest National Laboratory, operated by Battelle for the U.S. Department of Energy, worked with Intertek to develop a procedure for stress testing medium screw-base light sources. This procedure, composed of alternating stress cycles and performance evaluation, was used to qualitatively compare and contrast the durability and reliability of the Philips 60W replacement lamp L Prize entry with market-proven compact fluorescent lamps (CFLs) with comparable light output and functionality. The stress cycles applied simultaneous combinations of electrical, thermal, vibration, and humidity stresses of increasing magnitude. Performance evaluations measured relative illuminance, x chromaticity and y chromaticity shifts after each stressmore » cycle. The Philips L Prize entry lamps appear to be appreciably more durable than the incumbent energy-efficient technology, as represented by the evaluated CFLs, and with respect to the applied stresses. Through the course of testing, all 15 CFL samples permanently ceased to function as a result of the applied stresses, while only 1 Philips L Prize entry lamp exhibited a failure, the nature of which was minor, non-destructive, and a consequence of a known (and resolved) subcontractor issue. Given that current CFL technology appears to be moderately mature and no Philips L Prize entry failures could be produced within the stress envelope causing 100 percent failure of the benchmark CFLs, it seems that, in this particular implementation, light-emitting diode (LED) technology would be much more durable in the field than current CFL technology. However, the Philips L Prize entry lamps used for testing were carefully designed and built for the competition, while the benchmark CFLs were mass produced for retail sale—a distinction that should be taken into consideration. Further reliability testing on final production samples would be necessary to judge the extent to which the results of this analysis apply to production versions of the Philips L Prize entry.« less

A bibliography of terrain modeling (geomorphometry), the quantitative representation of topography: supplement 4.0

USGS Publications Warehouse

Pike, Richard J.

2002-01-01

Terrain modeling, the practice of ground-surface quantification, is an amalgam of Earth science, mathematics, engineering, and computer science. The discipline is known variously as geomorphometry (or simply morphometry), terrain analysis, and quantitative geomorphology. It continues to grow through myriad applications to hydrology, geohazards mapping, tectonics, sea-floor and planetary exploration, and other fields. Dating nominally to the co-founders of academic geography, Alexander von Humboldt (1808, 1817) and Carl Ritter (1826, 1828), the field was revolutionized late in the 20th Century by the computer manipulation of spatial arrays of terrain heights, or digital elevation models (DEMs), which can quantify and portray ground-surface form over large areas (Maune, 2001). Morphometric procedures are implemented routinely by commercial geographic information systems (GIS) as well as specialized software (Harvey and Eash, 1996; Köthe and others, 1996; ESRI, 1997; Drzewiecki et al., 1999; Dikau and Saurer, 1999; Djokic and Maidment, 2000; Wilson and Gallant, 2000; Breuer, 2001; Guth, 2001; Eastman, 2002). The new Earth Surface edition of the Journal of Geophysical Research, specializing in surficial processes, is the latest of many publication venues for terrain modeling. This is the fourth update of a bibliography and introduction to terrain modeling (Pike, 1993, 1995, 1996, 1999) designed to collect the diverse, scattered literature on surface measurement as a resource for the research community. The use of DEMs in science and technology continues to accelerate and diversify (Pike, 2000a). New work appears so frequently that a sampling must suffice to represent the vast literature. This report adds 1636 entries to the 4374 in the four earlier publications1. Forty-eight additional entries correct dead Internet links and other errors found in the prior listings. Chronicling the history of terrain modeling, many entries in this report predate the 1999 supplement. Coverage is representative from about 1800 through early–mid 2002. Papers increasingly are published exclusively or in duplicate on the Internet's World Wide Web; the dates given here for Web addresses (URLs) that lack a print publication indicate a Web site's last update or my last access of it. The bibliography is arranged alphabetically and thus is not readily summarized. This introduction cites about 500 entries, a third of them grouped under 24 morphometric topics, as a guide to the listing's contents. Continuing the practice of previous bibliographies in the series to provide more information on a few applications (see summary of past topics in Pike, 2000a), this report elaborates further on topographic data, putative new parameters, tectonic geomorphology/neo-orometry, biogeography, ice-cap morphometry, results from the Mars Global DEM, landslide-hazard mapping, terrain modeling as physics, Hack's law, and broad-scale computer visualization. The literature of some of these subjects is large, and none of the summaries is intended to more than introduce the topic and comment on some of the current contributions of terrain modeling. Closing the essay is a discussion of pre-1900 papers that trace the evolution of ridge-line and watercourse quantification by descriptive geometry, as well as comments on some new books and an on-line bulletin board.

Competencies of Career-Entry Medical Technology Graduates of Lyceum of Batangas: Basis for Enhancement of the Internship Training Program

ERIC Educational Resources Information Center

Valdez, Anacleta P.

2010-01-01

The role of medical technologists in the years due to changes in the laboratory environment. curriculum is needed to prepare graduates for changes in laboratory medicine. It is the ultimate goal of the College to prepare students for career entry positions as medical technology professionals. The curriculum should be designed to prepare the…

Entry order as a consideration for innovation strategies.

PubMed

Cohen, Fredric J

2006-04-01

Prior studies have defined an effect of market entry order on commercial success that depends on attributes of the underlying technology, the rate of change in technology improvement, consumer expectations of these attributes and the degree of unmet demand. Analyses of pharmaceutical sales data suggest that the commercial success of drugs is subject to similar forces. These findings have important implications for innovation strategies.

Library Bulletin [International Planned Parenthood Federation].

ERIC Educational Resources Information Center

International Planned Parenthood Federation, London (England).

Resources located in the International Planned Parenthood Federation (IPPF) Headquarters Library are inventoried in this library bulletin. Entries follow the IPPF classification scheme and are arranged by topics: (1) general office management and administration; (2) contraceptive methods; (3) family planning (general); (4) United Nations,…

The Politics of Encyclopaedias

ERIC Educational Resources Information Center

Fozooni, Babak

2012-01-01

The paper assesses the political credibility of three encyclopaedias (Encyclopaedia Britannica, Encyclopedia of Marxism and Wikipedia) in relation to three chosen topics (Friedrich Engels's biography; the political philosophy of fascism; and, the discipline of social psychology). I was interested in discerning how entries are represented and…

Index of Graduate Theses and Projects in Allied Health.

ERIC Educational Resources Information Center

Journal of Allied Health, 1991

1991-01-01

Contains 1,073 entries from 91 institutions, giving author, institution, year, degree, emphasis, discipline, and title, arranged by topic: allied health, biocommunication arts, child development/care, clinical psychology, dentistry, environmental health, exercise science, food service, health education, health services, medical laboratories, nurse…

ADMINISTRATIVE HANDBOOK ON SUMMER SECONDARY SCHOOLS.

ERIC Educational Resources Information Center

PARKER, ROBERT E.

REGULATIONS, SCHEDULES, AND SUGGESTED ADMINISTRATIVE PROCEDURES FOR SECONDAY LEVEL SUMMER SCHOOLS ARE INCLUDED IN AN ADMINISTRATIVE HANDBOOK. SPECIFIC ENTRIES DEAL WITH SUCH TOPICS AS PURPOSES OF THE SUMMER SCHOOLS, REQUIREMENTS FOR APPROVAL OF A SCHOOL, REGIONAL COOPERATION, CONSERVATION OF TALENT PROGRAMS, VARIOUS REQUIREMENTS AND CREDIT…

Index to Ecology (Multimedia). Second Edition.

ERIC Educational Resources Information Center

University of Southern California, Los Angeles. National Information Center for Educational Media.

This expanded catalog lists over 8,000 films, filmstrips, videotapes, transparencies, audiotapes, and records dealing with environmental and ecological topics. Subjects include: amphibians, botany, birth control, city planning, evolution, food chains, farming, oceanography, and sea life. Titles are listed alphabetically. Though entries are not…

Microwave heating: Industrial applications. Citations from the Engineering Index data base

NASA Astrophysics Data System (ADS)

Reed, W. E.

1980-06-01

Industrialized uses of microwave heating are covered in 225 citations, 22 of which are new entries. The topics include industrial heating and drying for processes such as paper drying, vulcanization, and textile processing. Equipment design and safety are also cited.

A study of topics for distance education-A survey of U.S. Fish and Wildlife Service employees

USGS Publications Warehouse

Ratz, Joan M.; Schuster, Rudy M.; Marcy, Ann H.

2011-01-01

The purpose of this study was to identify training topics and distance education technologies preferred by U.S. Fish and Wildlife Service employees. This study was conducted on behalf of the National Conservation Training Center to support their distance education strategy planning and implementation. When selecting survey recipients, we focused on employees in positions involving conservation and environmental education and outreach programming. We conducted the study in two phases. First, we surveyed 72 employees to identify useful training topics. The response rate was 61 percent; respondents were from all regions and included supervisors and nonsupervisors. Five topics for training were identified: creating and maintaining partnerships (partnerships), technology, program planning and development (program planning), outreach methods to engage the community (outreach methods), and evaluation methods. In the second phase, we surveyed 1,488 employees to assess preferences for training among the five topics identified in the first survey and preferences among six distance education technologies: satellite television, video conferencing, audio conferencing, computer mediated training, written resources, and audio resources. Two types of instructor-led training were included on the survey to compare to the technology options. Respondents were asked what types of information, such as basic facts or problem solving skills, were needed for each of the five topics. The adjusted response rate was 64 percent; respondents were from all regions and included supervisors and nonsupervisors. The results indicated clear preferences among respondents for certain training topics and technologies. All five training topics were valued, but the topics of partnerships and technology were given equal value and were valued more than the other three topics. Respondents indicated a desire for training on the topics of partnerships, technology, program planning, and outreach methods. For the six distance education technologies, respondents indicated different levels of usability and access. Audio conferencing and written resources were reported to be most usable and accessible. The ratings of technology usability/access differed according to region; respondents in region 9 rated most technologies higher on usability/access. Respondents indicated they would take courses through either onsite or distance education approaches, but they prefer onsite training for most topics and most types of information.

Communications Blackout Predictions for Atmospheric Entry of Mars Science Laboratory

NASA Technical Reports Server (NTRS)

Morabito, David D.; Edquist, Karl T.

2005-01-01

The Mars Science Laboratory (MSL) is expected to be a long-range, long-duration science laboratory rover on the Martian surface. MSL will provide a significant milestone that paves the way for future landed missions to Mars. NASA is studying options to launch MSL as early as 2009. There are three elements to the spacecraft; carrier (cruise stage), entry vehicle, and rover. The rover will have a UHF proximity link as the primary path for EDL communications and may have an X-band direct-to-Earth link as a back-up. Given the importance of collecting critical event telemetry data during atmospheric entry, it is important to understand the ability of a signal link to be maintained, especially during the period near peak convective heating. The received telemetry during entry (or played back later) will allow for the performance of the Entry-Descent-Landing technologies to be assessed. These technologies include guided entry for precision landing, a new sky-crane landing system and powered descent. MSL will undergo an entry profile that may result in a potential communications blackout caused by ionized particles for short periods near peak heating. The vehicle will use UHF and possibly X-band during the entry phase. The purpose of this rep0rt is to quantify or bound the likelihood of any such blackout at UHF frequencies (401 MHz) and X-band frequencies (8.4 GHz). Two entry trajectory scenarios were evaluated: a stressful entry trajectory to quantify an upper-bound for any possible blackout period, and a nominal trajectory to quantify likelihood of blackout for such cases.

Entry, Descent, and Landing technological barriers and crewed MARS vehicle performance analysis

NASA Astrophysics Data System (ADS)

Subrahmanyam, Prabhakar; Rasky, Daniel

2017-05-01

Mars has been explored historically only by robotic crafts, but a crewed mission encompasses several new engineering challenges - high ballistic coefficient entry, hypersonic decelerators, guided entry for reaching intended destinations within acceptable margins for error in the landing ellipse, and payload mass are all critical factors for evaluation. A comprehensive EDL parametric analysis has been conducted in support of a high mass landing architecture by evaluating three types of vehicles -70° Sphere Cone, Ellipsled and SpaceX hybrid architecture called Red Dragon as potential candidate options for crewed entry vehicles. Aerocapture at the Martian orbit of about 400 km and subsequent Entry-from-orbit scenarios were investigated at velocities of 6.75 km/s and 4 km/s respectively. A study on aerocapture corridor over a range of entry velocities (6-9 km/s) suggests that a hypersonic L/D of 0.3 is sufficient for a Martian aerocapture. Parametric studies conducted by varying aeroshell diameters from 10 m to 15 m for several entry masses up to 150 mt are summarized and results reveal that vehicles with entry masses in the range of about 40-80 mt are capable of delivering cargo with a mass on the order of 5-20 mt. For vehicles with an entry mass of 20 mt to 80 mt, probabilistic Monte Carlo analysis of 5000 cases for each vehicle were run to determine the final landing ellipse and to quantify the statistical uncertainties associated with the trajectory and attitude conditions during atmospheric entry. Strategies and current technological challenges for a human rated Entry, Descent, and Landing to the Martian surface are presented in this study.

Returning nurses to the workforce: developing a fast track back program.

PubMed

Burns, Helen K; Sakraida, Teresa J; Englert, Nadine C; Hoffmann, Rosemary L; Tuite, Patricia; Foley, Susan M

2006-01-01

Fast Track Back: Re-entry into Nursing Practice program. Describes the development, implementation, and evaluation of a state-of-the-art re-entry program facilitating the return of licensed nonpracticing RNs to the workforce through a quality education program that retools them for the workforce in the areas of pharmacology, skill development using the latest technology, practice standards, and nursing issues. The program consists of didactic content taught via classroom, Internet, skills laboratory, and high fidelity human simulated technology and a clinical component. The program is a mechanism that enables re-entry nurses to improve skills and competencies necessary to practice in today's healthcare environment.

Essays on competition in electricity markets

NASA Astrophysics Data System (ADS)

Bustos Salvagno, Ricardo Javier

The first chapter shows how technology decisions affect entry in commodity markets with oligopolistic competition, like the electricity market. I demonstrate an entry deterrence effect that works through cost uncertainty. Technology's cost uncertainty affects spot market expected profits through forward market trades. Therefore, incentives to engage in forward trading shape firms' decisions on production technologies. I show that high-cost but low-risk technologies are adopted by risk-averse incumbents to deter entry. Strategic technology adoption can end in a equilibrium where high-cost technologies prevail over low-cost but riskier ones. In the case of incumbents who are less risk-averse than entrants, entry deterrence is achieved by choosing riskier technologies. The main results do not depend on who chooses their technology first. Chapter two examines the Chilean experience on auctions for long-term supply contracts in electricity markets from 2006 to 2011. Using a divisible-good auction model, I provide a theoretical framework that explains bidding behavior in terms of expected spot prices and contracting positions. The model is extended to include potential strategic behavior on contracting decisions. Empirical estimations confirm the main determinants of bidding behavior and show heterogeneity in the marginal cost of over-contracting depending on size and incumbency. Chapter three analyzes the lag in capacity expansion in the Chilean electricity market from 2000 to 2004. Regarded as a result of regulatory uncertainty, the role of delays in the construction of a large hydro-power plant has been overlooked by the literature. We argue that those delays postponed projected investment and gave small windows of opportunity that only incumbents could take advantage of. We are able to retrace the history of investments through real-time information from the regulator's reports and a simple model enables us to explain the effect of those delays on suggested and under-construction investments.

Venus entry probe technology reference mission

NASA Astrophysics Data System (ADS)

van den Berg, M. L.; Falkner, P.; Atzei, A. C.; Phipps, A.; Mieremet, A.; Kraft, S.; Peacock, A.

The Venus Entry Probe is one of ESA's Technology Reference Missions (TRM). TRMs are model science-driven missions that are, although not part of the ESA science programme, able to provide focus to future technology requirements. This is accomplished through the study of several technologically demanding and scientifically meaningful mission concepts, which are strategically chosen to address diverse technological issues. The TRMs complement ESA's current mission specific development programme and allow the ESA Science Directorate to strategically plan the development of technologies that will enable potential future scientific missions. Key technological objectives for future planetary exploration include the use of small orbiters and in-situ probes with highly miniaturized and highly integrated payload suites. The low resource, and therefore low cost, spacecraft allow for a phased strategic approach to planetary exploration. The aim of the Venus Entry Probe TRM (VEP) is to study approaches for low cost in-situ exploration of the Venusian atmosphere. The mission profile consists of two minisats. The first satellite enters low Venus orbit. This satellite contains a highly integrated remote sensing payload suite primarily dedicated to support the in-situ atmospheric measurements of the aerobot. The second minisat enters deep elliptical orbit, deploys the aerobot, and subsequently operates as a data relay, data processing and overall resource allocation satellite. The micro-aerobot consists of a long-duration balloon that will analyze the Venusian middle cloud layer at an altitude of ˜ 55 km, where the environment is relatively benign (T = 20 C and p = 0.45 bars). The balloon will deploy a swarm of active ballast probes, which determine vertical profiles of selected properties of the lower atmosphere. In this presentation, the mission objectives and profile of the Venus Entry Probe TRM will be given as well as the key technological challenges.

Ocular Drug Delivery Barriers-Role of Nanocarriers in the Treatment of Anterior Segment Ocular Diseases.

PubMed

Bachu, Rinda Devi; Chowdhury, Pallabitha; Al-Saedi, Zahraa H F; Karla, Pradeep K; Boddu, Sai H S

2018-02-27

Ocular drug delivery is challenging due to the presence of anatomical and physiological barriers. These barriers can affect drug entry into the eye following multiple routes of administration (e.g., topical, systemic, and injectable). Topical administration in the form of eye drops is preferred for treating anterior segment diseases, as it is convenient and provides local delivery of drugs. Major concerns with topical delivery include poor drug absorption and low bioavailability. To improve the bioavailability of topically administered drugs, novel drug delivery systems are being investigated. Nanocarrier delivery systems demonstrate enhanced drug permeation and prolonged drug release. This review provides an overview of ocular barriers to anterior segment delivery, along with ways to overcome these barriers using nanocarrier systems. The disposition of nanocarriers following topical administration, their safety, toxicity and clinical trials involving nanocarrier systems are also discussed.

Ocular Drug Delivery Barriers—Role of Nanocarriers in the Treatment of Anterior Segment Ocular Diseases

PubMed Central

Bachu, Rinda Devi; Chowdhury, Pallabitha; Al-Saedi, Zahraa H. F.; Karla, Pradeep K.; Boddu, Sai H. S.

2018-01-01

Ocular drug delivery is challenging due to the presence of anatomical and physiological barriers. These barriers can affect drug entry into the eye following multiple routes of administration (e.g., topical, systemic, and injectable). Topical administration in the form of eye drops is preferred for treating anterior segment diseases, as it is convenient and provides local delivery of drugs. Major concerns with topical delivery include poor drug absorption and low bioavailability. To improve the bioavailability of topically administered drugs, novel drug delivery systems are being investigated. Nanocarrier delivery systems demonstrate enhanced drug permeation and prolonged drug release. This review provides an overview of ocular barriers to anterior segment delivery, along with ways to overcome these barriers using nanocarrier systems. The disposition of nanocarriers following topical administration, their safety, toxicity and clinical trials involving nanocarrier systems are also discussed. PMID:29495528

Market entry and exit by biotech and device companies funded by venture capital.

PubMed

Burns, Lawton R; Housman, Michael G; Robinson, Charles A

2009-01-01

Start-up companies in the biotechnology and medical device sectors are important sources of health care innovation. This paper describes the role of venture capital in supporting these companies and charts the growth in venture capital financial support. The paper then uses longitudinal data to describe market entry and exit by these companies. Similar factors are associated with entry and exit in the two sectors. Entries and exits in one sector also appear to influence entry in the other. These findings have important implications for developing innovative technologies and ensuring competitive markets in the life sciences.

Library Bulletin [International Planned Parenthood Federation, February 1973].

ERIC Educational Resources Information Center

International Planned Parenthood Federation, London (England).

Resources located in the International Planned Parenthood Federation (IPPF) Headquarters Library are inventoried in this quarterly library bulletin. Entries follow the IPPF classification scheme and are arranged by topics: (1) general office management and administration; (2) contraceptive methods; (3) family planning (general); (4) United…

Library Bulletin [International Planned Parenthood Federation, November 1972].

ERIC Educational Resources Information Center

International Planned Parenthood Federation, London (England).

Resources located in the International Planned Parenthood Federation (IPPF) Headquarters Library are inventoried in this quarterly library bulletin. Entries follow the IPPF classification scheme and are arranged by topics: (1) general office management and administration; (2) contraceptive methods; (3) family planning (general); (4) United…

Library Bulletin [International Planned Parenthood Federation, February 1972].

ERIC Educational Resources Information Center

International Planned Parenthood Federation, London (England).

Resources located in the International Planned Parenthood Federation (IPPF) Headquarters Library are inventoried in this library bulletin. Entries follow the IPPF classification scheme and are arranged by topics: (1) general office management and administration; (2) contraceptive methods; (3) family planning (general); (4) United Nations,…

Library Bulletin [International Planned Parenthood Federation, May 1973].

ERIC Educational Resources Information Center

International Planned Parenthood Federation, London (England).

Resources located in the International Planned Parenthood Federation (IPPF) Headquarters Library are inventoried in this library bulletin. Entries follow the IPPF classification scheme and are arranged by topics: (1) general office management and administration; (2) contraceptive methods; (3) family planning (general); (4) United Nations,…

Basic Drafting. Revised.

ERIC Educational Resources Information Center

Schertz, Karen

This introductory module on drafting includes the technical content and tasks necessary for a student to be employed in an entry-level drafting occupation. The module contains 18 instructional units that cover the following topics: introduction to drafting; tools and equipment; supplies and materials; sketching; scales; drawing format; lettering;…

Fibrinous iritis due to oxybuprocaine.

PubMed Central

Haddad, R

1989-01-01

Following minor surgery performed under topical application of oxybuprocaine (Dorsacaine, Novesin) two patients suffered from fibrinous iritis and moderate corneal swelling. We believe that this represents a toxic reaction caused by an inadvertent entry of this drug into the anterior chamber during the procedure. Images PMID:2920158

A Strategy for Improving the Quality of Entry-Level Management Accountants.

ERIC Educational Resources Information Center

Kreuze, Jerry G.; Newell, Gale E.

1996-01-01

Reasons for a lack of management accounting topics in business education include the following: (1) already full curriculum; (2) shortage of qualified teachers (Certified Public Accounting faculty outnumber Certified Management Accounting faculty 7:1); and (3) students prefer public accounting. (SK)

Selected Bibliography of Egyptian Educational Materials, Vol. 1, No. 4, 1975.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

This annotated bibliography of Egyptian publications on education contains 108 entries. Publications include journal articles, books, and government documents. The following educational topics are covered: adult education, teaching Arabic language, art education, audiovisual aids, teaching civics, formation of committees, secondary school courses…

Surgical Procedures. Second Edition. Teacher Edition.

ERIC Educational Resources Information Center

Baker, Beverly; And Others

This teacher's guide contains 13 units of instruction for a course that will prepare students with the entry-level competencies needed by a surgical technologist. The course covers the following topics: introduction to surgical procedures; diagnostic procedures; general surgery; gastrointestinal surgery; obstetrics and gynecological surgery;…

Performing arts medicine-a bibliographic retrospective of the early literature: an historical examination of bibliographic references pre-1975.

PubMed

Dawson, William J

2013-03-01

Performing arts medicine (PAM) emerged as a medical specialty around 1985. Prior to this time, relatively few publications addressed the identification and concerns of musicians' and dancers' medical problems. To determine what number and types of publications occurred prior to the actual beginnings of PAM as a discipline, and to determine how these original topics compared with present-day publications, a retrospective review of the current bibliographic database of the Performing Arts Medicine Association (PAMA) was undertaken. Out of a total of 12,600 entries to date, 489 references were found published from 1798 through 1974, which represent only 3.9% of the current database listings. One-sixth of the references were originally written in a language other than English. Journal articles were by far the most numerous type of publication. Topics with the highest number of entries included the neurobiology of music (n=77), dental/orofacial matters (71), and biographical accounts of composers or musicians and their illnesses (59). Other frequently published topics included hearing loss, physiology of playing instruments, and instrumental technique and teaching. Early topics with multiple publications included composers' biographies, dystonias, and surgery to improve finger independence for playing piano. Subjects whose publications occurred principally in the last two decades of this review included dermatological disorders, hearing loss, and ballet physiology, teaching, and technique. Those which remain popular to the present day include hearing loss, performance anxiety, focal dystonia, and dental/orofacial problems.

STS-114: Discovery Post Landing Press Briefing from JSC

NASA Technical Reports Server (NTRS)

2005-01-01

LeRoy Cain, STS-114 Ascent/Entry Flight Director, takes a solo stand with the Press in this briefing. He noted that the successful flight and return of Discovery is another important milestone, a fresh start, and a new beginning as part of NASA's commitment to the President's vision of man's return to the Moon, Mars and beyond. From this successful test flight, NASA will have a lot of learning and hard work to do in preparation for the next flight. Weather factors, safe landing, touch down, communications, re-entry, the Columbia, were some topics covered with the News media.

Entry Guidance for the Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Lu, Ping

1999-01-01

The X-33 Advanced Technology Demonstrator is a half-scale prototype developed to test the key technologies needed for a full-scale single-stage reusable launch vehicle (RLV). The X-33 is a suborbital vehicle that will be launched vertically, and land horizontally. The goals of this research were to develop an alternate entry guidance scheme for the X-33 in parallel to the actual X-33 entry guidance algorithms, provide comparative and complementary study, and identify potential new ways to improve entry guidance performance. Toward these goals, the nominal entry trajectory is defined by a piecewise linear drag-acceleration-versus-energy profile, which is in turn obtained by the solution of a semi-analytical parameter optimization problem. The closed-loop guidance is accomplished by tracking the nominal drag profile with primarily bank-angle modulation on-board. The bank-angle is commanded by a single full-envelope nonlinear trajectory control law. Near the end of the entry flight, the guidance logic is switched to heading control in order to meet strict conditions at the terminal area energy management interface. Two methods, one on ground-track control and the other on heading control, were proposed and examined for this phase of entry guidance where lateral control is emphasized. Trajectory dispersion studies were performed to evaluate the effectiveness of the entry guidance algorithms against a number of uncertainties including those in propulsion system, atmospheric properties, winds, aerodynamics, and propellant loading. Finally, a new trajectory-regulation method is introduced at the end as a promising precision entry guidance method. The guidance principle is very different and preliminary application in X-33 entry guidance simulation showed high precision that is difficult to achieve by existing methods.

Introduction to International Trade.

ERIC Educational Resources Information Center

Crummett, Dan M.; Crummett, Jerrie

This set of student and teacher guides is intended for use in a course to prepare students for entry-level employment in such occupational areas in international trade as business/finance, communications, logistics, and marketing. The following topics are covered in the course's five instructional units: introduction to careers in international…

Directory of Researchers in Educational Finance and Governance.

ERIC Educational Resources Information Center

Bryant, Miles T.

To facilitate communication among educational researchers and policymakers, this directory lists over 200 current research projects in educational finance and governance. The projects are grouped into four general topic areas, including educational finance and economics, law, organization, and politics. The entries give the researcher's name and…

Library Bulletin [International Planned Parenthood Federation, August 1973].

ERIC Educational Resources Information Center

International Planned Parenthood Federation, London (England).

Recent additions to the International Planned Parenthood Federation (IPPF) Headquarters Library are listed in this library bulletin. Entries follow the IPPF classification scheme and are arranged by topics: (1) general office management and administration, (2) contraceptive methods, (3) family planning (general), (4) United Nations, conferences,…

IPPF Co-operative Information Service (ICIS). August 1978.

ERIC Educational Resources Information Center

International Planned Parenthood Federation, London (England).

This booklet contains bibliographies on population education and family planning. The following topics are covered: family planning and biomedical science, social sciences related to family planning, international conferences, Africa, the Americas, Asia, Europe, the Middle East, and Oceania. Each entry gives the author, title, publisher, date, and…

Elementary Health: Authorized Resources Annotated List.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This comprehensive, annotated resource list is designed to assist in selecting resources authorized by the Alberta (Canada) Education Department for the elementary health classroom (Grades 1-6). Within each grade and topic, annotated entries for basic learning resources are listed, followed by support learning resources and authorized teaching…

Selected Bibliography of Egyptian Educational Materials, Vol. 1, No. 1, 1975.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

There are 101 selected entries in this annotated bibliography of Egyptian materials on education published in 1975. Materials include journal articles, books, and government documents. The bibliography covers the following topics: laws and legislation, meetings and symposia, primary schools, preparatory schools, secondary schools, experimental…

Commercial and Industrial Wiring.

ERIC Educational Resources Information Center

Kaltwasser, Stan; Flowers, Gary

This module is the third in a series of three wiring publications, includes additional technical knowledge and applications required for job entry in the commercial and industrial wiring trade. The module contains 15 instructional units that cover the following topics: blueprint reading and load calculations; tools and equipment; service;…

Selected Bibliography of Egyptian Educational Materials, Vol. 1, No. 2, 1975.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

There are 108 selected entries in this annotated bibliography of Egyptian materials on education published in 1975. Materials include journal articles, books, and government documents. The bibliography covers the following topics: adolescence, art education, child upbringing, comprehensive schools, curricula, educational change, educational aids,…

75 FR 70760 - Self-Regulatory Organizations; Municipal Securities Rulemaking Board; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-18

...'' and ``Economic indicators'' are added. Delivery Detail under this topic (``Book-entry only;'' ``Bearer... at the Commission's Public Reference Room. II. Self-Regulatory Organization's Statement of the... certain product knowledge and MSRB rules and eliminate redundancy; delete dated references to certain...

Selected Bibliography of Egyptian Educational Materials, Vol. 1, No. 3, 1975.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

There are 101 selected entries in this annotated bibliography of Egyptian materials on education published in 1975. Materials include journal articles, books, and government documents. The bibliography covers the following topics: academic certificates and dissertations, art education, audiovisual aids, camps, civics curricula, conferences and…

Computer Ethics Topics and Teaching Strategies.

ERIC Educational Resources Information Center

DeLay, Jeanine A.

An overview of six major issues in computer ethics is provided in this paper: (1) unauthorized and illegal database entry, surveillance and monitoring, and privacy issues; (2) piracy and intellectual property theft; (3) equity and equal access; (4) philosophical implications of artificial intelligence and computer rights; (5) social consequences…

Milestones in Health and Medicine.

ERIC Educational Resources Information Center

Harding, Anne S.

This book includes more than 500 entries describing advances in the treatment of disease and the understanding of human health. The emphasis is on significant advances in diseases, treatments, and health issues. Topics included are: alternative or nonwestern medicine; anesthesia and analgesia; antibiotics; cancer; cell biology and physiology;…

California oaks: a bibliography

Treesearch

James R. Griffin; Philip M. McDonald; Pamela C. Muick

1987-01-01

Among natural resource professionals, California oaks continue to attract considerable attention. This report provides a comprehensive bibliography of the extensive but scattered oak literature. The 768 references are organized into two systems: (a) a topical outline, in which references are displayed under key word headings and subheadings, and author-date entries...

Astronomical Book Trek: Astronomy Books of 1983.

ERIC Educational Resources Information Center

Fraknoi, Andrew

1984-01-01

Presents an annotated list of technical and non-technical astronomy books. Topic areas of non-technical books include general astronomy, amateur astronomy, computers and astronomy, history of astronomy, pseudoscience, space exploration, physics and astronomy, and textbooks. Each entry includes author, title, description, source, and current cost.…

The Oxford Guide to the History of Physics and Astronomy

NASA Astrophysics Data System (ADS)

Heilbron, John L.

2005-06-01

With over 150 alphabetically arranged entries about key scientists, concepts, discoveries, technological innovations, and learned institutions, the Oxford Guide to Physics and Astronomy traces the history of physics and astronomy from the Renaissance to the present. For students, teachers, historians, scientists, and readers of popular science books such as Galileo's Daughter , this guide deciphers the methods and philosophies of physics and astronomy as well as the historical periods from which they emerged. Meant to serve the lay reader and the professional alike, this book can be turned to for the answer to how scientists learned to measure the speed of light, or consulted for neat, careful summaries of topics as complicated as quantum field theory and as vast as the universe. The entries, each written by a noted scholar and edited by J. L. Heilbron, Professor of History and Vice Chancellor, Emeritus, University of California, Berkeley, reflect the most up-to-date research and discuss the applications of the scientific disciplines to the wider world of religion, law, war, art and literature. No other source on these two branches of science is as informative or as inviting. Thoroughly cross-referenced and accented by dozens of black and white illustrations, the Oxford Guide to Physics and Astronomy is the source to turn to for anyone looking for a quick explanation of alchemy, x-rays and any type of matter or energy in between.

Intermediate experimental vehicle, ESA program aerodynamics-aerothermodynamics key technologies for spacecraft design and successful flight

NASA Astrophysics Data System (ADS)

Dutheil, Sylvain; Pibarot, Julien; Tran, Dac; Vallee, Jean-Jacques; Tribot, Jean-Pierre

2016-07-01

With the aim of placing Europe among the world's space players in the strategic area of atmospheric re-entry, several studies on experimental vehicle concepts and improvements of critical re-entry technologies have paved the way for the flight of an experimental space craft. The successful flight of the Intermediate eXperimental Vehicle (IXV), under ESA's Future Launchers Preparatory Programme (FLPP), is definitively a significant step forward from the Atmospheric Reentry Demonstrator flight (1998), establishing Europe as a key player in this field. The IXV project objectives were the design, development, manufacture and ground and flight verification of an autonomous European lifting and aerodynamically controlled reentry system, which is highly flexible and maneuverable. The paper presents, the role of aerodynamics aerothermodynamics as part of the key technologies for designing an atmospheric re-entry spacecraft and securing a successful flight.

Inflatable re-entry shield ready for test in space

NASA Astrophysics Data System (ADS)

2000-02-01

The Russian spacecraft Mars'96 for instance, which was launched in November 1996 but failed to reach its nominal orbit, carried two modules designed to land on that planet's surface. For the last part of the mission, an Inflatable Re-Entry and Descent Technology (IRDT) had been deployed. The main components of this system were an aerobraking and thermally protective shell, a densely packed inflating material and a pressurisation system. This technology is now considered applicable to other re-entry scenarios such as payload recovery from the International Space Station, planetary landers for science missions and atmospheric research. A demonstration mission on 9/10 February 2000 will evaluate the performance of this new technology before it is offered to potential users. A Russian Soyuz/Fregat launcher, lifting off from the Kazakh steppe near Baikonur, will provide a low-cost flight opportunity for the test vehicle, which is equipped with the inflatable heat shield and a sensor package developed by DaimlerChrysler Aerospace (DASA). After four orbits around the Earth, the test vehicle will be powered by the launcher's upper stage to re-enter the atmosphere for a landing the next day about 1800 km north-west of the launch site. During the mission, a number of technical parameters such as pressure, temperature and deceleration will be monitored and the inflation of the re-entry/descent structure observed. "From this novel technology, we are expecting a major breakthrough, to make re-entry of small payloads more and more reliable, simpler and less costly than traditional systems", explains Dieter Kassing, ESA's IRDT project manager. One of the main instruments on board the test vehicle is a sensor device developed by the University of Stuttgart for the determination of oxygen partial pressure in low Earth orbit and during re-entry. The scientific/technical investigations will be led by Dr. Ulrich Schoettle (Stuttgart University). Lionel Marraffa (ESA) will lead the evaluation of the IRDT's aerothermodynamic behaviour. DASA was responsible for integration of the sensor package and is ESA's co-investigator for evaluation of the application aspects of this new technology. In addition to the sensor package, the mission will accommodate a collection of special stones to study the physical and chemical modifications in sedimentary rocks, i.e. simulated meteorites, during atmospheric infall. Co-investors of this experiment are Dr. André Brack (CNRS, Orleans) and Dr. Gero Kurat (Vienna University). This experiment is being co-sponsored by ESA. The Russian/European Starsem launch company and NPO Lavochkin, the Russian company that developed the original IRDT technology, will be responsible for launch, orbit control, re-entry and recovery of the sensor package under contract with the International Science & Technology Centre (Moscow). ESA, the European Commission and DASA are co-funding this contract, contributing $600K each.

Automated entry technologies for confined space work activities: A survey.

PubMed

Botti, Lucia; Ferrari, Emilio; Mora, Cristina

2017-04-01

Work in confined spaces poses a significant risk to workers and rescuers involved in the emergency response when an accident occurs. Despite several standards and regulations define the safety requirements for such activities, injuries, and fatalities still occur. Furthermore, the on-site inspections after accidents often reveal that both employers and employees fail to implement safe entry procedures. Removing the risk is possible by avoiding the worker entry, but many activities require the presence of the operator inside the confined space to perform manual tasks. The following study investigates the available technologies for hazardous confined space work activities, e.g., cleaning, inspecting, and maintenance tasks. The aim is to provide a systematic review of the automated solutions for high-risk activities in confined spaces, considering the non-man entry as the most effective confined space safety strategy. Second, this survey aims to provide suggestions for future research addressing the design of new technologies. The survey consists of about 60 papers concerning innovative technologies for confined space work activities. The document review shows that several solutions have been developed and automation can replace the workers for a limited number of hazardous tasks. Several activities still require the manual intervention due to the complex characteristics of confined spaces, e.g., to remove the remains of the automatic cleaning process from the bottom of a tank. The results show that available technologies require more flexibility to adapt to such occupational environments and further research is needed.

Heatshield for Extreme Entry Environment Technology (HEEET)

NASA Technical Reports Server (NTRS)

Venkatapathy, E.; Ellerby, D.; Stackpoole, M..; Peterson, K.; Gage, P.; Beerman, A.; Blosser, M.; Chinnapongse, R.; Dillman, R.; Feldman, J.;

Entry at Venus

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Smith, Brandon

2016-01-01

This is lecture to be given at the IPPW 2016, as part of the 2 day course on Short Course on Destination Venus: Science, Technology and Mission Architectures. The attached presentation material is intended to be introduction to entry aspects of Venus in-situ robotic missions. The presentation introduces the audience to the aerodynamic and aerothermodynamic aspects as well as the loads, both aero and thermal, generated during entry. The course touches upon the system design aspects such as TPS design and both high and low ballistic coefficient entry system concepts that allow the science payload to be protected from the extreme entry environment and yet meet the mission objectives.

Topic Maps: Adopting User-Centred Indexing Technologies in Course Management Systems

ERIC Educational Resources Information Center

Venkatesh, Vivek; Shaw, Steven; Dicks, Dennis; Lowerison, Gretchen; Zhang, Dai; Sanjakdar, Roukana

2007-01-01

This article provides an empirical evaluation of an indexing technology, topic maps (ISO 13250), in the context of an academic task in a higher education context. Topic maps are a form of indexing that define and display the interrelationships between various topics in a given domain, as well as anchor these topics to specific resources that help…

Comparative and International Education: A Bibliography (2014)

ERIC Educational Resources Information Center

Comparative Education Review, 2015

2015-01-01

The 2014 "Comparative Education Review" bibliography of refereed journal articles on topics relevant to comparative and international education covers all 12 months in 2014 and includes 3,389 entries--a full 30 percent increase over the set of references assembled in the 2013 bibliography. They are drawn from 280 refereed journals, both…

Catalog of Computer Programs Used in Undergraduate Geology Education (Second Edition): Installment 3.

ERIC Educational Resources Information Center

Burger, H. Robert

1983-01-01

Presents annotated list of computer programs related to geophysics, geomorphology, paleontology, economic geology, petroleum geology, and miscellaneous topics. Entries include description, instructional use(s), programing language, and availability. Programs described in previous installments (found in SE 533 635 and 534 182) focused on…

Selected Bibliography and Abstracts of Educational Materials in Pakistan, Vol. 15, No. 4, October-December, 1981.

ERIC Educational Resources Information Center

Saad, Geti, Comp.

Over 85 government publications, newspaper articles, monographs, and syllabi published between October and December 1981 are cited in this annotated listing. Entries are listed alphabetically by author under the following topics: educational administration, organization, and finance; curriculum; educational planning; examinations; higher…

Selected Bibliography and Abstracts of Educational Materials in Pakistan, Vol. 15, No. 3, July-September, 1981.

ERIC Educational Resources Information Center

Saad, Geti, Comp.

Government publications, newspaper articles, monographs, and syllabi published between July and September 1981 and dealing with Pakistani education are cited in this annotated listing. Entries are organized by the following topics: educational administration, organization, and financing; curriculum; educational development; educational goals,…

Sourcebook on Parenting and Child Care.

ERIC Educational Resources Information Center

Carpenter, Kathryn Hammell

Intended as a guide to parenting materials for parents and professionals who work with parents, this sourcebook and annotated bibliography of 940 entries is divided into five parts. Topical chapters in each part list and describe books and journals categorized as popular titles, professional titles, and directories. Chapters in part 1 list and…

Reviews of Instructional Software in Scholarly Journals: A Selected Bibliography.

ERIC Educational Resources Information Center

Bantz, David A.; And Others

This bibliography lists reviews of more than 100 instructional software packages, which are arranged alphabetically by discipline. Information provided for each entry includes the topical emphasis, type of software (i.e., simulation, tutorial, analysis tool, test generator, database, writing tool, drill, plotting tool, videodisc), the journal…

Additions to Bibliography: Education of Deaf-Blind, Fall 1972-June 1974.

ERIC Educational Resources Information Center

Perkins School for the Blind, Watertown, MA.

The bibliography lists 134 sources of information on education of the deaf-blind including journal articles, books, workshop and conference proceedings, bibliographies, films, and tapes. Entries are grouped under general topics such as parents, family and community; medical neurological management and concerns; educational evaluation and testing;…

Congenital abnormalities (a bibliography with abstracts). Report for 1964-Nov 77

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, E.A.

1977-11-01

Radiation hazards, food additives, gene mutations, musculoskeletal diseases, neoplasms, leukemia, rubella and chromosomes as related to congenital abnormalities are topics covered by the citations of research reports in the bibliography. (This updated bibliography contains 141 abstracts, 30 of which are new entries to the previous edition.)

Congenital abnormalities (a bibliography with abstracts). Report for 1964-November 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison, E.A.

1979-12-01

Radiation hazards, food additives, gene mutations, musculoskeletal diseases, neoplasms, leukemia, rubella and chromosomes as related to congenital abnormalities are topics covered by the citations of research reports in the bibliography. (This updated bibliography contains 184 abstracts, 18 of which are new entries to the previous edition.)

Foods from an Iowa Farm. A Resource Guide.

ERIC Educational Resources Information Center

Iowa State Dept. of Agriculture and Land Stewardship, Des Moines.

Prepared for elementary and secondary teachers, this guide provides an annotated list of 72 instructional materials for teaching about farming and the products of Iowa farms. Entries, listed under the organization that provides the materials, state type of instructional material, major topics addressed, grades for which materials are appropriate,…

Gaming and Gamification Part II

ERIC Educational Resources Information Center

Mallon, Melissa

2013-01-01

Just as academic gaming in general cannot be limited to any one topic or genre, the "Public Services Quarterly" Internet Resources column is not limited to a single entry on gaming and gamification in libraries. Public services librarians interested in designing their own games have many successful examples to draw from. The previous…

Re-Entry Women: Special Programs for Special Populations. Field Evaluation Draft.

ERIC Educational Resources Information Center

Hall, Roberta M.; Gleaves, Francelia D.

This pamphlet provides information on what higher education institutions can do to accomodate women over 25 who have interrupted their education for several years and are now entering or re-entering postsecondary institutions. Topics discussed include institutional attitudes, double discrimination, institutional invisibility, and barriers to…

The Tree Worker's Manual.

ERIC Educational Resources Information Center

Smithyman, S. J.

This manual is designed to prepare students for entry-level positions as tree care professionals. Addressed in the individual chapters of the guide are the following topics: the tree service industry; clothing, eqiupment, and tools; tree workers; basic tree anatomy; techniques of pruning; procedures for climbing and working in the tree; aerial…

Astronautics and aeronautics, 1976. A chronology

NASA Technical Reports Server (NTRS)

Ritchie, E. H.

1984-01-01

A chronology of events concerning astronautics and aeronautics for the year 1976 is presented. Some of the many and varied topics include the aerospace industry, planetary exploration, space transportation system, defense department programs, politics, and aerospace medicine. The entries are organized by the month and presented in a news release format.

Alternative Energy: A Guide to Free Information for Educators.

ERIC Educational Resources Information Center

White, Janet A.

This guide was compiled to help teachers and students locate free educational materials (both lessons and nontechnical background references) on renewable energy resources and energy conservation. The 214 entries are arranged by these topic areas: (1) energy efficiency and renewables; (2) biomass; (3) hydropower; (4) solar thermal energy; (5)…

Buying and Selling Words: What Every Good Librarian Should Know about the Dictionary Business.

ERIC Educational Resources Information Center

Kister, Ken

1993-01-01

Discusses features to consider when selecting dictionaries. Topics addressed include the publishing industry; the dictionary market; profits from dictionaries; pricing; competitive marketing tactics, including similar titles, claims to numbers of entries and numbers of definitions, and similar physical appearance; a trademark infringement case;…

Creating Community: A Roundtable on Canadian Aboriginal Literature.

ERIC Educational Resources Information Center

Eigenbrod, Renate, Ed.; Episkenew, Jo-Ann, Ed.

This book contains 13 essays on Canadian Aboriginal literature. Topics include literary criticism, pedagogical issues, and the experiences of Native authors and of faculty teaching Aboriginal literature in mainstream institutions. Entries are: (1) "Natives on Native Literature: What Do We Rightly Write? Or: Shot Headfirst from the Canon"…

Facilitating Women's Involvement in Non-Traditional Occupations.

ERIC Educational Resources Information Center

Wolansky, William D.

This paper examines three topics related to women's involvement in non-traditional occupations: (1) the historical origin of occupational classification; (2) the influence of World War II on women's expanded participation in the workforce; and (3) women's entry into non-traditional occupations. The industrial revolution in Europe and later in the…

Small Business Information Bibliography. Revised.

ERIC Educational Resources Information Center

Lamb, Melissa, Ed.; And Others

This annotated bibliography lists a wide variety of print materials that may be helpful to small business owners in acquiring the knowledge necessary to manage their businesses. The bibliography is arranged in chapters by main functional topics. In each chapter, subcategories of interest are then listed, and entries are arranged alphabetically…

Annotated Psychodynamic Bibliography for Residents in Psychiatry

PubMed Central

CALIGOR, EVE

1996-01-01

The author provides an annotated bibliography to introduce psychodynamic psychotherapy and psychoanalysis to residents in psychiatry. The emphasis of the selection is on relevance to practice. The entries are grouped by topic, levels of difficulty are noted, and readings are identified as being of either current or historic relevance. PMID:22700303

Resources for Improving Principal Effectiveness. Annotated Bibliography of Packaged Training Programs.

ERIC Educational Resources Information Center

Gaddy, C. Stephen

This annotated bibliography of commercially prepared training materials for management and leadership development programs offers 10 topical sections of references applicable to school principal training. Entries were selected by using the following criteria: (1) programs dealing too specifically with management in sales, manufacturing, finance,…

State of the Art: Perspectives on Serving Deaf-Blind Children.

ERIC Educational Resources Information Center

Lowell, Edgar L., Ed.; Rouin, Carole C., Ed.

Provided is a collection of 23 papers on current services for deaf-blind individuals with four sections on background information, medical and diagnostic perspectives, home visitation and parent counseling, and other topics which include research, program evaluation, and legislative and legal action. Among the entries included are the following…

Update: Saudi Arabia.

ERIC Educational Resources Information Center

McGregor, Joy; Nydell, Margaret

A guide for persons planning on living in or relocating to Saudi Arabia for extended periods of time, this book features information on such topics as entry requirements, transportation, money matters, housing, schools, and insurance. The guide's contents include the following sections: (1) an overview; (2) before leaving; (3) on arrival; (4)…

Social Sciences of Sport: Bibliographies on Educational Topics No. 3.

ERIC Educational Resources Information Center

ERIC Clearinghouse on Teacher Education, Washington, DC.

This publication is one of a series of annotated bibliographies in physical education. There are four sections--sport history, sport psychology, sport sociology, and sport philosophy. Each section consists of a brief introduction, the annotated bibliographic entries arranged alphabetically by author, and a list of cross references for documents…

Research Relating to Children. Bulletin 30: March 1972-August 1972.

ERIC Educational Resources Information Center

O'Connell, Dorothy, Comp.; And Others

This research bulletin includes reports of research in progress or recently completed from March through August 1972. Each entry includes information concerning the investigator, purposes, subjects, methods, duration, cooperating groups, and findings (if available). The reports are listed under several topical headings: (1) Long-Term Research, (2)…

Major Appliance Repair. Teacher Edition.

ERIC Educational Resources Information Center

Smreker, Eugene; Calvert, King

This module is a comprehensive text on basic appliance repair, designed to prepare students for entry-level jobs in this growing field. Ensuring a firm grounding in electrical knowledge, the module contains 13 instructional units that cover the following topics: (1) major appliance repair orientation; (2) safety and first aid; (3) fundamentals of…

Machine Operator Training Program and Curriculum.

ERIC Educational Resources Information Center

St. Cyr, David; And Others

This curriculum contains materials for use in duplicating the 11-week course for machine operators that was implemented at New Hampshire Vocational-Technical College in Nashua, New Hampshire. Addressed in the course, which is designed to prepare entry-level employees, are the following topics: basic math, blueprint reading, layout tools and…

Entry, Descent, and Landing With Propulsive Deceleration

NASA Technical Reports Server (NTRS)

Palaszewski, Bryan

2012-01-01

The future exploration of the Solar System will require innovations in transportation and the use of entry, descent, and landing (EDL) systems at many planetary landing sites. The cost of space missions has always been prohibitive, and using the natural planetary and planet s moons atmospheres for entry, descent, and landing can reduce the cost, mass, and complexity of these missions. This paper will describe some of the EDL ideas for planetary entry and survey the overall technologies for EDL that may be attractive for future Solar System missions.

Progress Towards providing Heat-Shield for Extreme Entry Environment Technology (HEEET) for Venus and other New Froniters Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Ellerby, Don; Gage, Peter

2017-01-01

Heat-shield for Extreme Entry Environment Technology (HEEET) has been in development since 2014 with the goal of enabling missions to Venus, Saturn and other high-speed sample return missions. It is offered as a new technology and incentivized for mission use in the New Frontiers 4 AO by NASA. The current plans are to mature the technology to TRL 6 by FY18. The HEEET Team has been working closely with multiple NF-4 proposals to Venus, Saturn and has been supporting recent Ice-Giants mission studies. This presentation will provide progress made to date and the plans for development in FY18.

Aerodynamic Challenges for the Mars Science Laboratory Entry, Descent and Landing

NASA Technical Reports Server (NTRS)

Schoenenberger, Mark; Dyakonov, Artem; Buning, Pieter; Scallion, William; Norman, John Van

2009-01-01

An overview of several important aerodynamics challenges new to the Mars Science Laboratory (MSL) entry vehicle are presented. The MSL entry capsule is a 70 degree sphere cone-based on the original Mars Viking entry capsule. Due to payload and landing accuracy requirements, MSL will be flying at the highest lift-to-drag ratio of any capsule sent to Mars (L/D = 0.24). The capsule will also be flying a guided entry, performing bank maneuvers, a first for Mars entry. The system's mechanical design and increased performance requirements require an expansion of the MSL flight envelope beyond those of historical missions. In certain areas, the experience gained by Viking and other recent Mars missions can no longer be claimed as heritage information. New analysis and testing is re1quired to ensure the safe flight of the MSL entry vehicle. The challenge topics include: hypersonic gas chemistry and laminar-versus-turbulent flow effects on trim angle, a general risk assessment of flying at greater angles-of-attack than Viking, quantifying the aerodynamic interactions induced by a new reaction control system and a risk assessment of recontact of a series of masses jettisoned prior to parachute deploy. An overview of the analysis and tests being conducted to understand and reduce risk in each of these areas is presented. The need for proper modeling and implementation of uncertainties for use in trajectory simulation has resulted in a revision of prior models and additional analysis for the MSL entry vehicle. The six degree-of-freedom uncertainty model and new analysis to quantify roll torque dispersions are presented.

Development of advanced entry, descent, and landing technologies for future Mars Missions

NASA Technical Reports Server (NTRS)

Chu, Cheng-Chih (Chester)

2006-01-01

Future Mars missions may need the capability to land much closer to a desired target and/or advanced methods of detecting, avoiding, or tolerating landing hazards. Therefore, technologies that enable 'pinpoint landing' (within tens of meters to 1 km of a target site) will be crucial to meet future mission requirements. As part of NASA Research Announcement, NRA 03-OSS-01, NASA solicited proposals for technology development needs of missions to be launched to Mars during or after the 2009 launch opportunity. Six technology areas were identified as of high priority including advanced entry, descent, and landing (EDL) technologies. In May 2004, 11 proposals with PIs from universities, industries, and NASA centers, were awarded in the area of advanced EDL by NASA for further study and development. This paper presents an overview of these developing technologies.

Enabling technologies for Chinese Mars lander guidance system

NASA Astrophysics Data System (ADS)

Jiang, Xiuqiang; Li, Shuang

2017-04-01

Chinese first Mars exploration activity, orbiting landing and roaming collaborative mission, has been programmed and started. As a key technology, Mars lander guidance system is intended to serve atmospheric entry, descent and landing (EDL) phases. This paper is to report the formation process of enabling technology road map for Chinese Mars lander guidance system. First, two scenarios of the first-stage of the Chinese Mars exploration project are disclosed in detail. Second, mission challenges and engineering needs of EDL guidance, navigation, and control (GNC) are presented systematically for Chinese Mars exploration program. Third, some useful related technologies developed in China's current aerospace projects are pertinently summarized, especially on entry guidance, parachute descent, autonomous hazard avoidance and safe landing. Finally, an enabling technology road map of Chinese Mars lander guidance is given through technological inheriting and improving.

Development and Testing of a New Family of Supersonic Decelerators

NASA Technical Reports Server (NTRS)

Clark, Ian G.; Adler, Mark; Rivellini, Tommaso P.

2013-01-01

The state of the art in Entry, Descent, and Landing systems for Mars applications is largely based on technologies developed in the late 1960's and early 1970's for the Viking Lander program. Although the 2011 Mars Science Laboratory has made advances in EDL technology, these are predominantly in the areas of entry (new thermal protection systems and guided hypersonic flight) and landing (the sky crane architecture). Increases in entry mass, landed mass, and landed altitude beyond MSL capabilities will require advances predominantly in the field of supersonic decelerators. With this in mind, a multi-year program has been initiated to advance three new types of supersonic decelerators that would enable future large-robotic and human-precursor class missions to Mars.

Thermal and Structural Performance of Woven Carbon Cloth For Adaptive Deployable Entry and Placement Technology

NASA Technical Reports Server (NTRS)

Arnold, James O.; Peterson, Keith H.; Yount, Bryan C.; Schneider, Nigel; Chavez-Garcia, Jose

2013-01-01

Arcjet testing and analysis of a three-dimensional (3D) woven carbon fabric has shown that it can be used as a thermal protection system and as a load bearing structural component for a low ballistic coefficient hypersonic decelerator called ADEPT (Adaptive Deployable Entry and Placement Technology). Results of arcjet tests proved that the 3D woven carbon fabric can withstand flight-like heating while under flight-like biaxial mechanical loads representative of those encountered during shallow entry flight path angles into the atmosphere of Venus. Importantly, the arcjet test results have been used to extend a preliminary material thermal response model based on previous testing of the same 3D woven carbon fabric under uni-axial mechanical loading.

Guidance and Control Algorithms for the Mars Entry, Descent and Landing Systems Analysis

NASA Technical Reports Server (NTRS)

Davis, Jody L.; CwyerCianciolo, Alicia M.; Powell, Richard W.; Shidner, Jeremy D.; Garcia-Llama, Eduardo

2010-01-01

The purpose of the Mars Entry, Descent and Landing Systems Analysis (EDL-SA) study was to identify feasible technologies that will enable human exploration of Mars, specifically to deliver large payloads to the Martian surface. This paper focuses on the methods used to guide and control two of the contending technologies, a mid- lift-to-drag (L/D) rigid aeroshell and a hypersonic inflatable aerodynamic decelerator (HIAD), through the entry portion of the trajectory. The Program to Optimize Simulated Trajectories II (POST2) is used to simulate and analyze the trajectories of the contending technologies and guidance and control algorithms. Three guidance algorithms are discussed in this paper: EDL theoretical guidance, Numerical Predictor-Corrector (NPC) guidance and Analytical Predictor-Corrector (APC) guidance. EDL-SA also considered two forms of control: bank angle control, similar to that used by Apollo and the Space Shuttle, and a center-of-gravity (CG) offset control. This paper presents the performance comparison of these guidance algorithms and summarizes the results as they impact the technology recommendations for future study.

Two-Year ET Programs: Essential Topics and Levels of Proficiency.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

1990-01-01

Reports the results of a survey of graduates, employers, and instructors of engineering technology programs for the essential topics in mechanical engineering technology, mechanical drafting/design technology, manufacturing engineering technology, and industrial engineering technology. Identifies the proficiency level suggested for classwork and…

Development Challenges of Game-Changing Entry System Technologies From Concept to Mission Infusion

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Beck, Robin; Ellerby, Don; Feldman, Jay; Gage, Peter; Munk, Michelle; Wercinski, Paul

2016-01-01

Realization within the US and NASA that future exploration both Human and Robotic will require innovative new technologies led to the creation of the Space Technology Mission Directorate and investment in game changing technologies with high pay-off. Some of these investments will see success and others, due to many of the constraints, will not attain their goal. The co-authors of this proposed presentation have been involved from concept to mission infusion aspects of entry technologies that are game changing. The four example technologies used to describe the challenges experienced along the pathways to success are at different levels of maturity. They are Conformal, 3-D MAT, HEEET and ADEPT. The four examples in many ways capture broad aspects of the challenges of maturation and illustrate what led some to be exceptionally successful and how others had to be altered in order remain viable game changing technologies.

NASA's Advanced TPS Materials and Technology Development: Multi-Functional Materials and Systems for Space Exploration

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Feldman, Jay; Ellerby, Donald T.; Wercinski, Paul F.; Beck, Robin A S.

2017-01-01

NASA's future missions will be more demanding. They require materials to be mass efficient, robust, multi-functional, scalable and able to be integrated with other subsystems to enable innovative missions to accomplish future science missions. Thermal protection systems and materials (TPSM) are critical for the robotic and human exploration of the solar system when it involves entry. TPSM is a single string system with no back-up. Mass efficiency and robustness are required. Integration of TPSM with the aeroshell is both a challenge and an opportunity. Since 2010, NASA's Space Technology Mission Directorate has invested in innovative new materials and systems across a spectrum of game changing technologies. In this keynote address, we plan to highlight and present our successful approaches utilized in developing four different materials and system technologies that use innovative new manufacturing techniques to meet mission needs. 3-D weaving and felt manufacturing allowed us to successfully propose new ways of addressing TPSM challenges. In the 3-D MAT project, we developed and delivered a multi-functional TPS materials solution, in under three years that is an enabler for Lunar Capable Orion Spacecraft. Under the HEEET project, we are developing a robust heat-shield that can withstand extreme entry conditions, both thermally and mechanically, for entry at Venus, Saturn or higher speed sample return missions. The improved efficiency of HEEET allows science missions entry at much reduced G'loads enabling delicate science instruments to be used. The ADEPT concept is a foldable and deployable entry system and the critical component is a multi-functional fabric that is foldable and deployable and also functions as a mechanical aeroshell and a TPS. The fourth technology we will highlight involves felt to address integration challenges of rigid ablative system such as PICA that was used on MSL. The felt technology allows us to develop a compliant TPS for easy integration. The above four technology developments have focused on mission infusion as the success criteria. These technologies are in different stages of mission infusion. These innovations have led to new mission concepts to be proposed in the future. In our keynote address we will present approaches we have employed throughout the project to create the bridge to transition from low TRL to mission infusion and to overcome the traditional TRL valley of death.

Re-Entry: Inflatable Technology Development in Russian Collaboration (RITD)

NASA Astrophysics Data System (ADS)

Koryanov, V. V.; Kazakovtsev, V. P.; Harri, A.-M.; Da-Poian, V.

2018-04-01

Technology has been developed specifically for launching spacecraft into the planet's atmosphere. The technology is based on the concept of using inflatable braking device, which was originally developed for landing in conditions of Mars.

System Level Aerothermal Testing for the Adaptive Deployable Entry and Placement Technology (ADEPT)

NASA Technical Reports Server (NTRS)

Cassell, Alan; Gorbunov, Sergey; Yount, Bryan; Prabhu, Dinesh; de Jong, Maxim; Boghozian, Tane; Hui, Frank; Chen, Y.-K.; Kruger, Carl; Poteet, Carl;

Prospective Black Teachers and the Closing Door: Strategies for Entry.

ERIC Educational Resources Information Center

Davis, Melvin, Ed.; And Others

The following papers are presented in this publication: (1) "The Technology of Teacher-Competency Testing" (Cordell Wynn); (2) "The Black Public School Teacher: Alabama's Endangered Species" (Charlena Bray); (3) "Early Identification and Preparation for Successful Entry into Teacher Education Programs" (M. Carolyn…

ADEPT - A Mechanically Deployable Entry System Technology in Development at NASA

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Wercinski, Paul; Cassell, Alan; Smith, Brandon; Yount, Bryan

2016-01-01

The proposed presentation will give an overview of a mechanically deployable entry system concept development with a comprehensive summary of the ground tests and design development completed to-date, and current plans for a small-scale flight test in the near future.

The Beginning Lecture and the Improvement of “Experiments in Innovative Chemistry” as an Entry Subjects at the Department of Biochemistry and Applied Chemistry in National College of Technology

NASA Astrophysics Data System (ADS)

Tsuda, Yusuke; Nakashima, Hiroyuki; Tsuji, Yutaka; Watanabe, Katsuhiro; Ooka, Hisako

The beginning lecture and the improvement of “Experiments in Innovative Chemistry” as an entry subjects in the Department of Biochemistry and Applied Chemistry at Kurume National College of Technology has been performed for recent three years. Every experiment was selected to sustain the young student's interest. The questionnaires were performed after first two year's programs were finished, and some of projects were improved. This subject has a good reputation for students and teachers, and seems to be very effective for the first year students of national college of technology.

Your Reading: A Booklist for Junior High Students. Fifth Edition.

ERIC Educational Resources Information Center

Walker, Jerry L., Ed.

Written for adolescents, this most recent edition contains annotations for over 1,500 publications in the fiction and nonfiction categories. Most entries have been published in the past few years, though well-written older books are also included. Topics covered under fiction include books on adventure, family life, freedom, friendship, fantasy,…

Allied Health Occupations I (Health Assistant). Middletown Public Schools Curriculum Standards.

ERIC Educational Resources Information Center

Middletown Public Schools, CT.

This volume outlines the requirements and content of a first-year course in allied health occupations education that is intended to prepare students for entry-level employment in such allied health occupations as nurse's aide and health assistant. Addressed in the individual units of the course are the following topics: health worker…

Population Migration in Rural Areas, January 1979-December 1988. Quick Bibliography Series.

ERIC Educational Resources Information Center

La Caille John, Patricia, Comp.

This bibliography consists of 87 entries of materials related to population trends in rural and nonmetropolitan areas. This collection is the result of a computerized search of the AGRICOLA database. The bibliography covers topics of rural population change, migration and migrants, farm labor supplies and social conditions, and different patterns…

Managing the Academic Library Cataloging Department in Changing Times: A State of the Art Bibliography.

ERIC Educational Resources Information Center

Sibley, Brenda Parris

This paper presents an annotated bibliography of articles that provide information on managing the academic library cataloging department. Topics include: hiring tests for technical services support staff; changing roles for professional, paraprofessional staff and support staff; motivating and rewarding cataloging staff; a study of entry level…

Annotated Bibliography for Preadolescents from Divorced Families and Their Parents and Teachers.

ERIC Educational Resources Information Center

Woodman, Larry

Addressing the effects of rapidly escalating divorce rates on children, this 86-item annotated bibliography looks at using bibliotherapy individually, in designated groups, or for whole classes as a means of providing support and growth for preadolescents. Topics and specific problems addressed by the entries in the annotated bibliography include:…

The Film Book Bibliography 1940-1975.

ERIC Educational Resources Information Center

Ellis, Jack C.; And Others

More than 5,400 entries are included in this first attempt to cite and classify all English language books, monographs, and dissertations about film that appeared from 1940 to 1975. Intended as a source of information about existing film books and as a tool for researching available literature on any film topic, the bibliography uses ten basic…

Selected Bibliography and Abstracts of Educational Materials in Pakistan. Volume 4, Number 4.

ERIC Educational Resources Information Center

Saad, Ismail, Ed.

This selected list of 121 citations on the public education system of Pakistan is annotated to give the description and appropriate level of each document. Entries are arranged according to 33 major topics: 1) education administration, organization, and finance; 2) educational history, educational philosophy; 3) educational development,…

Substance Abuse and Pregnancy: A Comprehensive Bibliography.

ERIC Educational Resources Information Center

Krulewitch, Cara J.; Herman, Allen A.

This bibliography, containing over 1,000 entries from the period 1968 to June, 1991, was compiled to assist in the development of a report to Congress on the impact (both maternal and fetal) of substance abuse on pregnancy. Topics include pregnancy outcome, child health issues, legal and political issues, epidemiological aspects of substance abuse…

Environment: General; Grammar & Usage; Money Management; Music History; Web Page Creation & Design.

ERIC Educational Resources Information Center

Web Feet, 2001

2001-01-01

Describes Web site resources for elementary and secondary education in the topics of: environment, grammar, money management, music history, and Web page creation and design. Each entry includes an illustration of a sample page on the site and an indication of the grade levels for which it is appropriate. (AEF)

Introduction to Insulation. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Associated General Contractors of America, Washington, DC.

This module on introductory insulation is one of a series of modules designed to teach basic skills necessary for entry-level employment in this field. The instructor's guide contains three instructional units that cover the following topics: (1) insulation materials; (2) insulation tools; and (3) insulation layout and basic skills. Each…

Machupo Virus Glycoprotein Determinants for Human Transferrin Receptor 1 Binding and Cell Entry

DTIC Science & Technology

2011-07-01

conserved residues mapping to the surface of the determined MACV GP1 crystal structure (DNAStar Lasergene Software ). We identified ten residues of...2010) http://www3.niaid.nih.gov/topics/ BiodefenseRelated/Biodefense/research/CatA.htm. 8. Peters CJ, Kuehne RW, Mercado RR, Le Bow RH, Spertzel RO, et

Residential Wiring. Teacher Edition [and] Student Edition. Third Edition.

ERIC Educational Resources Information Center

Taylor, Mark; Batson, Larry; Carroll, Charles; Ipock, Dan; Leak, Lester; Onstott, Todd

This revised curriculum guide for teachers and students is designed to help prepare students for entry-level employment in the residential wiring trade. The curriculum guide contains six units that cover the following topics: (1) blueprint reading and load calculations; (2) service; (3) rough-in; (4) trim out and troubleshooting; (5) low voltage…

Introduction to Agricultural Products and Processing. Teacher Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This document consists of the teacher's guide to a module designed to teach high school students entry-level job competencies in the new areas of agriculture that are now emerging. The module, one of a series of publications designed to identify these new competencies, contains 11 instructional units that cover the following topics: trends in…

Elites, Bureaucrats, Ostriches, and Pussycats: Managing Research in Policy Settings.

ERIC Educational Resources Information Center

Marshall, Catherine

Female researchers conducting field research in educational politics encounter special problems of access, entry, reciprocity, and ethics. Accordingly, this study focuses first on field research methods in policy settings as a general topic, then on problems specific to women in this area. A researcher must be aware of informal coalitions or…

Commercial and Industrial Wiring. Teacher Edition [and] Student Edition. Third Edition.

ERIC Educational Resources Information Center

Kaltwasser, Stan; Flowers, Gary; Aneke, Norbert O.

This revised curriculum guide for teachers and students includes the additional technical knowledge and applications required to help prepare students for job entry in the commercial and industrial wiring trade. The curriculum guide contains 16 units that cover the following topics: (1) blueprint reading and load calculations; (2) tools and…

Student manual, Book 2: Orientation to occupational safety compliance in DOE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Colley, D.L.

1993-10-01

This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling & storage; inspection responsibilities & procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics & human factors; medical & first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures.

Private Security Training. Phase 1: Basic. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This basic module on private security training was designed under the direction of the Oklahoma Council on Law Enforcement Education and Training to teach basic skills necessary for entry-level employment in this field. This module contains six instructional units that cover the following topics: (1) interpreting the Oklahoma Security Guard and…

An Annotated Bibliography of Some Recent Articles That Correlate with the Sewall Early Education Developmental Program (SEED).

ERIC Educational Resources Information Center

Jackson, Janice; Flamboe, Thomas C.

The annotated bibliography contains approximately 110 references (1969-1976) of articles related to the Sewall Early Education Developmental Program. Entries are arranged alphabetically by author within the following seven topic areas: social emotional, gross motor, fine motor, adaptive reasoning, speech and language, feeding and dressing and…

Selected Bibliography and Abstracts of Educational Materials in Pakistan. Vol. 10, No. 3, 1977. Period Covered July-September, 1977.

ERIC Educational Resources Information Center

Saad, Geti, Comp.

Approximately 100 citations of journals, newspapers, and government publications dealing with education in Pakistan are included in this annotated bibliography. The materials were published from July through September 1977. Arranged alphabetically by author in 22 categories, the entries cover topics including educational administration, adult…

Beyond Pilgrim Hats and Turkey Hands: Using Thanksgiving to Promote Citizenship and Activism

ERIC Educational Resources Information Center

Christie, Erica M.; Montgomery, Sarah E.

2010-01-01

In many elementary classrooms, Thanksgiving is celebrated by donning homemade Pilgrim hats, grocery bag vests, and colorful construction-paper headdresses, as students join together to reenact the "first" Thanksgiving with a mock feast. Students compose journal entries on the topic, "what I am thankful for." These typical Thanksgiving activities,…

Career Development Curriculum for Single Parents/Homemakers.

ERIC Educational Resources Information Center

Malott, Karen; Taylor, Angela

This core curriculum, in use at the Homemaker ReEntry Center at Northern Kentucky University, provides three units of materials that teachers can use to help homemakers make the transition to the world of work. The first unit, on personal development, covers such topics such as self-esteem, self-awareness, goal setting, decision making, sex role…

Introduction to Concrete Reinforcing. Instructor Edition. Introduction to Construction Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This module on concrete reinforcing is one of a series of modules designed to teach basic skills necessary for entry-level employment in this field. This module contains three instructional units that cover the following topics: (1) concrete reinforcing materials; (2) concrete reinforcing tools; and (3) concrete reinforcing basic skills. Each…

Content Guidelines for an Undergraduate Human Resources Curriculum: Recommendations from Human Resources Professionals

ERIC Educational Resources Information Center

Sincoff, Michael Z.; Owen, Crystal L.

2004-01-01

In this study, the authors surveyed 445 human resources (HR) professionals to determine their views regarding the HR curriculum content that will lead to graduates' success in entry-level (first-job) HR positions. Ninety-eight questionnaires (22%) were returned. Respondents identified five topics--equal employment opportunity/affirmative action…

Nutrition Education Development Project. ESEA Title IVC Project. Pamphlet File.

ERIC Educational Resources Information Center

Luzerne Intermediate Unit 18, Kingston, PA.

This compilation of pamphlets and other educational materials on current issues in nutrition provides elementary and secondary teachers with a list of free or inexpensive materials to help them implement nutrition education into the existing curriculum. This list, organized in alphabetical order by topic, contains 293 entries and each one includes…

Youth Employability. Monographs on Research and Policy Studies. Five Award-Winning Monographs.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This document presents five winning entries in the second annual competition for papers reporting research and policy studies on the topic of youth employability. In their paper entitled "The Impact of Employment and Training Programs on the Work Attitudes of Disadvantaged Youth," Michael Forcier and Andrew Hahn review and synthesize the…

Point-of-care technology supports bedside documentation.

PubMed

Carlson, Elizabeth; Catrambone, Cathy; Oder, Karl; Nauseda, Susan; Fogg, Lou; Garcia, Brian; Brown, Frederick M; Johnson, Mary E; Johnson, Tricia J; Llewellyn, Jane

2010-09-01

As the conversion to an electronic health record intensifies, the question of which data-entry device works best in what environment and situation is paramount. Specifically, what is the best mix of equipment to purchase and install on clinical units based on staff preferences and budget constraints? The authors discuss their evaluation of stationary personal computers, workshops on wheels, and handheld tablets related to timeliness of data entry and their use of focus groups to ascertain the pros/cons of data-entry devices and staff preferences. An assessment of the implications for costs related to the timeliness of data entry is also presented.

Health Canada/BIOTECanada Summit on regulatory and clinical topics related to subsequent entry biologics (biosimilars), Ottawa, Canada, 14 May 2012.

PubMed

Kay, Jonathan; Feagan, Brian G; Guirguis, Micheal S; Keystone, Edward C; Klein, Agnes V; Lubiniecki, Anthony S; Mould, Diane R; Nyarko, Kwasi A; Ridgway, Anthony A G; Trudeau, Maureen E; Wang, Jian

2012-11-01

In May 2012, Health Canada and other participants held a National Summit on Subsequent Entry Biologics (SEBs). Health Canada released a guidance document in March 2010 describing policy positions and data requirements for approval of SEBs. While Health Canada and health agencies in other regulatory jurisdictions are aligned on many scientific principles related to biosimilar drugs, Health Canada's specific requirements may not be widely understood by many Canadian stakeholders. The Summit provided an opportunity for education and dialog among physicians who prescribe biologics, provincial payers, and industry on the following topics: preclinical and clinical comparability studies; manufacturing and other product differences; extrapolation of indications; substitution and interchangeability of SEBs with reference biologic drugs in clinical practice; payers' current perspective; pharmacovigilance and naming. It is anticipated that the consensus reached at this meeting will further educate Canadian healthcare professionals, provincial payers, and insurers about the appropriate use of SEBs, and may be of general interest to others internationally. Copyright © 2012 The International Alliance for Biological Standardization. All rights reserved.

2004 NASA Seal/Secondary Air System Workshop, Volume 1

NASA Technical Reports Server (NTRS)

2005-01-01

The 2004 NASA Seal/Secondary Air System workshop covered the following topics: (1) Overview of NASA s new Exploration Initiative program aimed at exploring the Moon, Mars, and beyond; (2) Overview of the NASA-sponsored Ultra-Efficient Engine Technology (UEET) program; (3) Overview of NASA Glenn s seal program aimed at developing advanced seals for NASA s turbomachinery, space, and reentry vehicle needs; (4) Reviews of NASA prime contractor and university advanced sealing concepts including tip clearance control, test results, experimental facilities, and numerical predictions; and (5) Reviews of material development programs relevant to advanced seals development. The NASA UEET overview illustrated for the reader the importance of advanced technologies, including seals, in meeting future turbine engine system efficiency and emission goals. For example, the NASA UEET program goals include an 8- to 15-percent reduction in fuel burn, a 15-percent reduction in CO2, a 70-percent reduction in NOx, CO, and unburned hydrocarbons, and a 30-dB noise reduction relative to program baselines. The workshop also covered several programs NASA is funding to develop technologies for the Exploration Initiative and advanced reusable space vehicle technologies. NASA plans on developing an advanced docking and berthing system that would permit any vehicle to dock to any on-orbit station or vehicle, as part of NASA s new Exploration Initiative. Plans to develop the necessary mechanism and androgynous seal technologies were reviewed. Seal challenges posed by reusable re-entry space vehicles include high-temperature operation, resiliency at temperature to accommodate gap changes during operation, and durability to meet mission requirements.

A Multifunctional Hot Structure Heatshield Concept for Planetary Entry

NASA Technical Reports Server (NTRS)

Walker, Sandra P.; Daryabeigi, Kamran; Samareh, Jamshid A.; Wagner, Robert; Waters, Allen

2015-01-01

A multifunctional hot structure heatshield concept is being developed to provide technology enhancements with significant benefits compared to the current state-of-the-art heatshield technology. These benefits can potentially enable future planetary missions. The concept is unique in integrating the function of the thermal protection system with the primary load carrying structural component. An advanced carbon-carbon material system has been evaluated for the load carrying structure, which will be utilized on the outer surface of the heatshield, and thus will operate as a hot structure exposed to the severe aerodynamic heating associated with planetary entry. Flexible, highly efficient blanket insulation is sized for use underneath the hot structure to maintain required operational internal temperatures. The approach followed includes developing preliminary designs to demonstrate feasibility of the concept and benefits over a traditional, baseline design. Where prior work focused on a concept for an Earth entry vehicle, the current efforts presented here are focused on developing a generic heatshield model and performing a trade study for a Mars entry application. This trade study includes both structural and thermal evaluation. The results indicate that a hot structure concept is a feasible alternative to traditional heatshields and may offer advantages that can enable future entry missions.

FLPP IXV Re-Entry Vehicle, Supersonic Charectisation Based on DNW SST Wind Tunnel Tests and CFD

NASA Astrophysics Data System (ADS)

Kapteijn, C.; Maseland, H.; Chiarelli, C.; Mareschi, V.; Tribot, J.-P.; Binetti, P.; Walloscheck, T.

2009-01-01

The European Space Agency ESA, has engaged in 2004, the IXV project (Intermediate eXperimental Vehicle) which is part of the FLPP (Future Launcher Preparatory Programme) aiming at answering to critical technological issues for controlled re-entry, while supporting the future generation launchers and to improve in general European capabilities in the strategic field of atmospheric re-entry for future space transportation, exploration and scientific applications. The IXV key mission and system objectives are the design, development, manufacturing, assembling and on- ground to in-flight verification of an autonomous European lifting and aerodynamically controlled re- entry system, integrating the critical re- entry technologies at the system level. In particular, the IXV shall demonstrate system integrated key technologies such as lifting flight control by means of aerodynamic surfaces that are one of the main primary objectives of the experimental investigation. Lifting and aerodynamic controlled re-entry represents a significant capability advancement with respect to the ballistic re-entry of capsules like the ARD. Since hypersonic aerodynamics is essentially different from supersonic aerodynamics, the current mission is to perform an atmospheric re-entry in combination with a safe recovery the in supersonic flight regime. However, mission extension to trimmed transonic flight is under consideration based on a preliminary analysis of the aerodynamic characteristics of the IXV configuration. Since the beginning of the IXV project, an aerodynamic data base (AEDB) has been built up and continuously updated integrating the additional information mainly provided by means of CFD (ie: Euler and Navier-Stokes) and lately also by means of WTTs. This AEDB serves for flying qualities analysis and for re-entry simulations. During the development phase B2/C1, the effectiveness of the control surfaces and their impact on te vehicle's aerodynamic forces in the supersonic regime is measured for a number of discrete deflection settings in the Super-Sonic wind Tunnel (SST) of DNW. Enabling an improved understanding of the measured aerodynamic characteristics, complementary computations were performed by Thales Alenia Space. The complete set of data was analyzed and compared enabling a consolidation of the nominal aerodynamic and aerodynamic uncertainties as well. The paper presents the main objectives of the supersonic characterisation of IXV including WTTs, and the main outcomes of the current data comparisons.

75 FR 51877 - Proposed Collection: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-23

... sale and issue of Marketable Book-Entry securities. DATES: Written comments should be received on or.... Form Number: Sale and Issue of Marketable Book-Entry Treasury Bills, Notes, and Bonds. Abstract: The..., including through the use of automated collection techniques or other forms of information technology; and...

Graphic Arts/Offset Lithography.

ERIC Educational Resources Information Center

Hoisington, James; Metcalf, Joseph

This revised curriculum for graphic arts is designed to provide secondary and postsecondary students with entry-level skills and an understanding of current printing technology. It contains lesson plans based on entry-level competencies for offset lithography as identified by educators and industry representatives. The guide is divided into 15…

Technology and operational considerations for low-heat-rate trajectories. [of future winged earth reentry vehicles

NASA Technical Reports Server (NTRS)

Wurster, K. E.; Eldred, C. H.

1979-01-01

A broad parametric study which examines several critical aspects of low-heat-rate entry trajectories is performed. Low planform loadings associated with future winged earth-entry vehicles coupled with the potential application of metallic thermal protection systems (TPS) suggest that such trajectories are of particular interest. Studied are three heating conditions - reference, stagnation, and windward centerline, for both laminar and turbulent flow; configuration-related factors including planform loading and hypersonic angle of attack; and mission-related factors such as cross-range and orbit inclination. Results indicate benefits in the design of TPS to be gained by utilizing moderate angles of attack as opposed to high-lift coefficient, high angles of attack, during entry. An assessment of design and technology implications is made.

Computerized physician order entry from a chief information officer perspective.

PubMed

Cotter, Carole M

2004-12-01

Designing and implementing a computerized physician order entry system in the critical care units of a large urban hospital system is an enormous undertaking. With their significant potential to improve health care and significantly reduce errors, the time for computerized physician order entry or physician order management systems is past due. Careful integrated planning is the key to success, requiring multidisciplinary teams at all levels of clinical and administrative management to work together. Articulated from the viewpoint of the Chief Information Officer of Lifespan, a not-for-profit hospital system in Rhode Island, the vision and strategy preceding the information technology plan, understanding the system's current state, the gap analysis between current and future state, and finally, building and implementing the information technology plan are described.

What systems participants know about access and service entry and why managers should listen.

PubMed

Duncombe, Rohena

2017-08-01

Objective The present study looked at the views of people directly involved in the entry process for community health counselling using the frame of the health access literature. The concurrence of system participants' views with the access literature highlights access issues, particularly for people who are vulnerable or disadvantaged. The paper privileges the voices of the system participants, inviting local health services to consider using participatory design to improve access at the entry point. Methods People involved in the entry process for community health counselling explored the question, 'What, for you, are the features of a good intake system?' They also commented on themes identified during pilot interviews. These were thematically analysed for each participant group by the researcher to develop a voice for each stakeholder group. Results People accessing the service could be vulnerable and the entry process failed to take that into account. People directly involved in the counselling service entry system, system participants, consisted of: professionals referring in, people seeking services and reception staff taking first enquiries. They shared substantially the same concerns as each other. The responses from these system participants are consistent with the international literature on access and entry into health services. Conclusion Participatory service design could improve primary healthcare service entry at the local level. Canvassing the experiences of system participants is important for delivering services to those who have the least access and, in that way, could contribute to health equity. What is known about the topic? People with the highest health needs receive the fewest services. Health inequality is increasing. What does this paper add? System participants can provide advice consistent with the academic research literature that is useful for improving service entry at the local level. What are the implications for practitioners? Participatory design can inform policy makers and service providers. Entry systems could acknowledge the potential vulnerability or disadvantage of people approaching the service.

A Survey of the Rapidly Emerging Field of Nanotechnology: Potential Applications for Scientific Instruments and Technologies for Atmospheric Entry Probes

NASA Technical Reports Server (NTRS)

Meyyappan, M.; Arnold, J. O.

2005-01-01

The field of Nanotechnology is well funded worldwide and innovations applicable to Solar System Exploration are emerging much more rapidly than thought possible just a few years ago. This presentation will survey recent innovations from nanotechnololgy with a focus on novel applications to atmospheric entry science and probe technology, in a fashion similar to that presented by Arnold and Venkatapathy at the previous workshop forum at Lisbon Portugal, October 6-9, 2003. Nanotechnology is a rapidly emerging field that builds systems, devices and materials from the bottom up, atom by atom, and in so doing provides them with novel and remarkable macro-scale performance. This technology has the potential to revolutionize space exploration by reducing mass and simultaneously increasing capability. Thermal, Radiation, Impact Protective Shields: Atmospheric probes and humans on long duration deep space missions involved in Solar System Exploration must safely endure 3 significant hazards: (i) atmospheric entry; (ii) radiation; and (iii) micrometeorite or debris impact. Nanostructured materials could be developed to address all three hazards with a single protective shield, which would involve much less mass than a traditional approach. The concept can be ready in time for incorporation into NASA s Crew Exploration Vehicle, and possible entry probes to fly on the Jupiter Icy Moons

Leveraging Emerging Technology to Maintain Corporate Situational Awareness

DTIC Science & Technology

2008-06-01

Abstract and Outline for 13th ICCRTS For the paper entitled: Leveraging Emerging Technology to Maintain Corporate ...Situational Awareness Topics: Topic 5. Organizational Issues Topic 4. Cognitive and Social Issues Topic: 2 Networks and Networking Mr. José...for the collection of information is estimated to average 1 hour per response , including the time for reviewing instructions, searching existing data

Development Challenges of Game-Changing Entry System Technologies from Concept to Mission Infusion

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Beck, Robin; Ellerby, Don; Feldman, Jay; Gage, Peter; Munk, Michelle; Wercinski, Paul

2015-01-01

Realization within the US and NASA that future exploration both Human and Robotic will require innovative new technologies led to the creation of the Space Technology Mission Directorate and investment in game changing technologies with high pay-off. Some of these investments will see success and others, due to many of the constraints, will not attain their goal. The co-authors of this proposed presentation have been involved from concept to mission infusion aspects of entry technologies that are game changing. The four example technologies used to describe the challenges experienced along the pathways to success are at different levels of maturity. They are Conformal, 3-D MAT, HEEET and ADEPT. The four examples in many ways capture broad aspects of the challenges of maturation and illustrate what led some to be exceptionally successful and how others had to be altered in order remain viable game changing technologies. Subsystem technologies for robotic and human missions?

Woven Thermal Protection System Based Heat-shield for Extreme Entry Environments Technology (HEEET)

NASA Technical Reports Server (NTRS)

Ellerby, Donald; Venkatapathy, Ethiraj; Stackpoole, Margaret; Chinnapongse, Ronald; Munk, Michelle; Dillman, Robert; Feldman, Jay; Prabhu, Dinesh; Beerman, Adam

2013-01-01

NASA's future robotic missions utilizing an entry system into Venus and the outer planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of state of the art low to mid density ablators such as PICA or Avcoat. Therefore mission planners typically assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic is a robust TPS material however its high density and relatively high thermal conductivity constrain mission planners to steep entries, with high heat fluxes and pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose challenges for certification in existing ground based test facilities and the longer-term sustainability of CP will continue to pose challenges. In 2012 the Game Changing Development Program (GCDP) in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASA's most challenging entry missions. This project was highly successful demonstrating that a Woven TPS solution compares favorably to CP in performance in simulated reentry environments and provides the opportunity to manufacture graded materials that should result in overall reduced mass solutions and enable a much broader set of missions than does CP. Building off the success of the WTPS project GCDP has funded a follow on project to further mature and scale up the WTPS concept for insertion into future NASA robotic missions. The matured WTPS will address the CP concerns associated with ground based test limitations and sustainability. This presentation will briefly discuss results from the WTPS Project and the plans for WTPS maturation into a heat-shield for extreme entry environment.

Woven Thermal Protection System Based Heat-shield for Extreme Entry Environments Technology (HEEET)

NASA Technical Reports Server (NTRS)

Chinnapongse, Ronald; Ellerbe, Donald; Stackpoole, Maragaret; Venkatapathy, Ethiraj; Beerman, Adam; Feldman, Jay; Peterson Keith; Prabhu, Dinesh; Dillman, Robert; Munk, Michelle

2013-01-01

NASA's future robotic missions utilizing an entry system into Venus and the outer planets, namely, Saturn, Uranus, Neptune, result in extremely severe entry conditions that exceed the capabilities of state of the art low to mid density ablators such as PICA or Avcoat. Therefore mission planners typically assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic (CP) is a robust TPS material however its high density and relatively high thermal conductivity constrain mission planners to steep entries, with high heat fluxes and pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose challenges for certification in existing ground based test facilities and the longer-­-term sustainability of CP will continue to pose challenges. In 2012 the Game Changing Development Program (GCDP) in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASA's most challenging entry missions. This project was highly successful demonstrating that a Woven TPS solution compares favorably to CP in performance in simulated reentry environments and provides the opportunity to manufacture graded materials that should result in overall reduced mass solutions and enable a much broader set of missions than does CP. Building off the success of the WTPS project GCDP has funded a follow on project to further mature and scale up the WTPS concept for insertion into future NASA robotic missions. The matured WTPS will address the CP concerns associated with ground based test limitations and sustainability. This presentation will briefly discuss results from the WTPS Project and the plans for WTPS maturation into a heat-­-shield for extreme entry environment.

Planetary/DOD entry technology flight experiments. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Christensen, H. E.; Krieger, R. J.; Mcneilly, W. R.; Vetter, H. C.

1976-01-01

The feasibility of using the space shuttle to launch planetary and DoD entry flight experiments was examined. The results of the program are presented in two parts: (1) simulating outer planet environments during an earth entry test, the prediction of Jovian and earth radiative heating dominated environments, mission strategy, booster performance and entry vehicle design, and (2) the DoD entry test needs for the 1980's, the use of the space shuttle to meet these DoD test needs, modifications of test procedures as pertaining to the space shuttle, modifications to the space shuttle to accommodate DoD test missions and the unique capabilities of the space shuttle. The major findings of this program are summarized.

Entry Vehicle Control System Design for the Mars Smart Lander

NASA Technical Reports Server (NTRS)

Calhoun, Philip C.; Queen, Eric M.

2002-01-01

The NASA Langley Research Center, in cooperation with the Jet Propulsion Laboratory, participated in a preliminary design study of the Entry, Descent and Landing phase for the Mars Smart Lander Project. This concept utilizes advances in Guidance, Navigation and Control technology to significantly reduce uncertainty in the vehicle landed location on the Mars surface. A candidate entry vehicle controller based on the Reaction Control System controller for the Apollo Lunar Excursion Module digital autopilot is proposed for use in the entry vehicle attitude control. A slight modification to the phase plane controller is used to reduce jet-firing chattering while maintaining good control response for the Martian entry probe application. The controller performance is demonstrated in a six-degree-of-freedom simulation with representative aerodynamics.

Propulsion Technology Development for Sample Return Missions Under NASA's ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil, Eric J.; Vento, Daniel; Dankanich, John W.; Munk, Michelle M.; Hahne, David

2011-01-01

The In-Space Propulsion Technology (ISPT) Program was tasked in 2009 to start development of propulsion technologies that would enable future sample return missions. Sample return missions could be quite varied, from collecting and bringing back samples of comets or asteroids, to soil, rocks, or atmosphere from planets or moons. The paper will describe the ISPT Program s propulsion technology development activities relevant to future sample return missions. The sample return propulsion technology development areas for ISPT are: 1) Sample Return Propulsion (SRP), 2) Planetary Ascent Vehicles (PAV), 3) Entry Vehicle Technologies (EVT), and 4) Systems/mission analysis and tools that focuses on sample return propulsion. The Sample Return Propulsion area is subdivided into: a) Electric propulsion for sample return and low cost Discovery-class missions, b) Propulsion systems for Earth Return Vehicles (ERV) including transfer stages to the destination, and c) Low TRL advanced propulsion technologies. The SRP effort will continue work on HIVHAC thruster development in FY2011 and then transitions into developing a HIVHAC system under future Electric Propulsion for sample return (ERV and transfer stages) and low-cost missions. Previous work on the lightweight propellant-tanks will continue under advanced propulsion technologies for sample return with direct applicability to a Mars Sample Return (MSR) mission and with general applicability to all future planetary spacecraft. A major effort under the EVT area is multi-mission technologies for Earth Entry Vehicles (MMEEV), which will leverage and build upon previous work related to Earth Entry Vehicles (EEV). The major effort under the PAV area is the Mars Ascent Vehicle (MAV). The MAV is a new development area to ISPT, and builds upon and leverages the past MAV analysis and technology developments from the Mars Technology Program (MTP) and previous MSR studies.

Sandia National Laboratories: National Security Programs

Science.gov Websites

policy. Topics About Nuclear Weapons Safety & Security Science & Technology Defense Systems & science and technology to help defend and protect the United States. Topics About Defense Systems & . Topics Stationary Power Earth Science Transportation Energy Energy Research Global Security Birc We

ADSORPTION TECHNOLOGIES - GREEN BAY

EPA Science Inventory

The presentation provides an overview of adsorptive media technology for the removal of arsenic from drinking water. The presentation is divided into four topics: Technology, Application, Design and Operation. Each topic is discussed in general and a number of photographs from ...

Effects of Angle of Attack on the Behaviour of Imperfections in Thermal Protection Systems of Re-entry Vehicles

NASA Astrophysics Data System (ADS)

Palharini, R. C.; Scanlon, T. J.; Reese, J. M.

The study of atmospheric re-entry under rarefied nonequilibrium flows is a challenging problem directly related to the development of new aerospace technologies, where the prediction of thermal loads acting over the spacecraft is critical during descent phase.

Current Investments in the NASA Entry Systems Modeling Project

NASA Technical Reports Server (NTRS)

Wright, Michael; Barnhardt, Michael; Hughes, Monica

2017-01-01

This talk will provide an overview of investments in the Entry Systems Modeling project, along with some context of where the effort sits in the overall Space Technology EDL Portfolio. Technical highlights, particularly with referent to work on Ablation Modeling, will be given. Future directions will be discussed.

ADSORPTION TECHNOLOGIES - EVERETT, WA

EPA Science Inventory

The presentation provides an overview of adsorptive media technology for the removal of arsenic from drinking water. The presentation is divided into four topics: Technology, Application, Design and Operation. Each topic is discussed in general and a number of photographs from th...

ADSORPTION TECHNOLOGIES - REDLAND, CA

EPA Science Inventory

The presentation provides an overview of adsorptive media technology for the removal of arsenic from drinking water. The presentation is divided into four topics: Technology, Application, Design and Operation. Each topic is discussed in general and a number of photographs from t...

ADSORPTION TECHNOLOGIES - LAPEER, MI

EPA Science Inventory

The presentation provides an overview of adsorptive media technology for the removal of arsenic from drinking water. The presentation is divided into four topics: Technology, Application, Design and Operation. Each topic is discussed in general and a number of photographs from th...

High Altitude Venus Operations Concept Trajectory Design, Modeling and Simulation

NASA Technical Reports Server (NTRS)

Lugo, Rafael A.; Ozoroski, Thomas A.; Van Norman, John W.; Arney, Dale C.; Dec, John A.; Jones, Christopher A.; Zumwalt, Carlie H.

2015-01-01

A trajectory design and analysis that describes aerocapture, entry, descent, and inflation of manned and unmanned High Altitude Venus Operation Concept (HAVOC) lighter-than-air missions is presented. Mission motivation, concept of operations, and notional entry vehicle designs are presented. The initial trajectory design space is analyzed and discussed before investigating specific trajectories that are deemed representative of a feasible Venus mission. Under the project assumptions, while the high-mass crewed mission will require further research into aerodynamic decelerator technology, it was determined that the unmanned robotic mission is feasible using current technology.

Cubesat Application for Planetary Entry (CAPE) Missions: Micro-Reentry Capsule (MIRCA)

NASA Technical Reports Server (NTRS)

Esper, Jaime

2014-01-01

The Cubesat Application for Planetary Entry Missions (CAPE) concept describes a high-performing Cubesat system which includes a propulsion module and miniaturized technologies capable of surviving atmospheric entry heating, while reliably transmitting scientific and engineering data. The Micro Return Capsule (MIRCA) is CAPEs first planetary entry probe flight prototype. Within this context, this paper briefly describes CAPEs configuration and typical operational scenario, and summarizes ongoing work on the design and basic aerodynamic characteristics of the prototype MIRCA vehicle. CAPE not only opens the door to new planetary mission capabilities, it also offers relatively low-cost opportunities especially suitable to university participation.

Current and emerging business models in the health care information technology industry: a view from wall street.

PubMed

Frank, Seth

2003-01-01

When we think about health care IT, we don't just think about clinical automation with the movement to computerized physician order entry (CPOE), but also the need to upgrade legacy financial and administrative systems to interact with clinical systems. Technology acceptance by physicians remains low, and computer use by physicians for data entry and analysis remains minimal. We expect this trend to change, and expect increased automation to represent gradual change. The HCIT space is dynamic, with many opportunities, but also many challenges. The unique nature of the end market buyers, existing business models, and nature of the technology makes this a challenging but dynamic area for equity investment.

Design Projects in Human Anatomy & Physiology

ERIC Educational Resources Information Center

Polizzotto, Kristin; Ortiz, Mary T.

2008-01-01

Very often, some type of writing assignment is required in college entry-level Human Anatomy and Physiology courses. This assignment can be anything from an essay to a research paper on the literature, focusing on a faculty-approved topic of interest to the student. As educators who teach Human Anatomy and Physiology at an urban community college,…

Scientific Research in British Universities and Colleges 1970-71, Volume I, Physical Sciences.

ERIC Educational Resources Information Center

Department of Education and Science, London (England).

This annual publication aims to provide a brief summary of active research topics in British universities and other institutions. This volume, the first of a three-volume series, is divided into broad subject fields and the university/college entries are arranged alphabetically within them. Also included within this volume on the physical sciences…

Scientific Research in British Universities and Colleges 1969-70, Volume II, Biological Sciences.

ERIC Educational Resources Information Center

Department of Education and Science, London (England).

This annual publication aims to provide a brief summary of active research topics in British universities and other institutions. This volume, the second of a three-volume series, is divided into broad subject fields and the university/college entries are arranged alphabetically within them. Also included within this volume on the biological…

Preparation of Careers in Transportation. Student Manual.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Vocational Education.

Part of a series devoted to the topic of career education in transportation, this manual, which is intended for use by students in grades 11 and 12, is composed of three units designed to aid in preparing students for entry level positions or postsecondary education in the field of transportation. Unit I, which is concerned with the student's…

Looking for a Focus: Transformations in Journal Entries.

ERIC Educational Resources Information Center

Nemoianu, Anca M.

Journal writing on literary topics is an ideal activity in a classroom that emphasizes the transformational role of education, bringing together the creation of meaning between the reader and the text on the one hand, and on the other hand, the creation of expressive or reflexive writing. An activity, in a freshman literature and writing class for…

The Mass Media: An Integrated Unit. Resources.

ERIC Educational Resources Information Center

Dwyer, Barry

1982-01-01

A comprehensive approach to a critical study of the mass media is presented in this journal insert, which also provides a format for planning an integrated unit. The main section of the insert focuses on seven questions and their answers concerning: (1) selection of the topic, (2) justifying a mass media curriculum, (3) entry experience, (4)…

NATIONAL CONFERENCE ON THE PREPARATION OF TEACHERS OF THE DEAF. (VIRGINIA BEACH, MARCH 15-19, 1964).

ERIC Educational Resources Information Center

QUIGLEY, STEPHEN P.

PARTICIPANTS IN THE FOUR-DAY NATIONAL CONFERENCE ON THE PREPARATION OF TEACHERS OF THE DEAF COMPILED RECOMMENDATIONS ABOUT TEACHER PREPARATION AFTER DISCUSSING FOUR MAJOR TOPIC AREAS. RECOMMENDATIONS ABOUT RECRUITMENT AND SELECTION OF STUDENTS INCLUDED RECRUITMENT OF TEACHERS, TIME OF ENTRY OF STUDENT INTO PROGRAM, PREVIOUS PREPARATION OF STUDENT,…

Selected Bibliography of Educational Materials: Maghreb, Algeria, Libya, Morocco, Tunisia. Vol. 10, No. 4, 1976.

ERIC Educational Resources Information Center

Azzouz, Azzedine; And Others

Ninety-one English language annotations are presented of newspaper articles and government publications about education in Algeria, Libya, Morocco, and Tunisia. Most of the entries were published during the period October-December 1976. Organized by country, the references cover topics of philosophy and theory of education, teacher training,…

Characterization of the "CCR5" Chemokine Receptor Gene

ERIC Educational Resources Information Center

Thomas, John C.

2004-01-01

The life cycle of retroviruses is an essential topic of modern cell biology instruction. Furthermore, the process of HIV viral entry into the cell is a question of great interest in basic and clinical biology. This paper describes how students can easily recover their own DNA, amplify a portion of the "CCR5" chemokine receptor gene, characterize…

Materials on Nursing in the Clearinghouse: Bibliography #16, and Neonatal Intensive Care Units: Bibliography #17.

ERIC Educational Resources Information Center

Illinois Public Health Association, Springfield.

The first of the two bibliographies in this document contains 38 entries on neonatal nursing, including books and journal articles (originally published from 1973 to 1986) dealing with such topics as high-risk pregnancy and delivery, home care of developmentally disabled newborns, and family dynamics. The second bibliography, titled "Neonatal…

Current Integration of Dissection in Medical Education in Australia and New Zealand: Challenges and Successes

ERIC Educational Resources Information Center

Bouwer, Hope Ellen; Valter, Krisztina; Webb, Alexandra Louise

2016-01-01

The reduced use of dissection associated with the introduction of integrated systems problem-based learning curricula, graduate-entry programs and medical school expansion is a frequent topic of discussion and debate in modern medical training. The purpose of this study was to investigate the impact of these changes to the medical education…

Term Paper Resource Guide to Twentieth-Century United States History.

ERIC Educational Resources Information Center

Muccigrosso, Robert; Blazek, Ron; Maggio, Teri

Geared to the needs of high school and undergraduate students, this guide presents 500 term paper ideas and print and nonprint sources on 20th-century U.S. history. Entries on 100 of the most important topics, issues, and developments in U.S. history, beginning with the Spanish-American War, are organized in chronological order. Each entry…

Family Literacy: Community & Family Life Materials. A Guide to Recent and Recommended Books.

ERIC Educational Resources Information Center

Lane, Martha A.; And Others

The books in this family literacy guide are listed alphabetically by title in each of three sections. The author, publisher, copyright date, reading level, type of book, number of pages, International Standard Book Number, price, and annotation comprise each entry. The topic of the family contains 11 titles: "Angry Feelings"; "Beginning with…

International Conference on Environmental Education (Vigyan Bhavan, New Delhi, India, December 16-20, 1981). Abstracts.

ERIC Educational Resources Information Center

Bhat, J. L., Ed.; Bandhu, Desh, Ed.

Abstracts of papers presented at the International Conference on Environmental Education are included in this document. Although title, author(s), and abstract are provided for each of the 124 entries, a table of contents and author/subject index are not included. Topics and issues addressed focus on various aspects of environmental education…

Guidance and Control Architecture Design and Demonstration for Low Ballistic Coefficient Atmospheric Entry

NASA Technical Reports Server (NTRS)

Swei, Sean

2014-01-01

We propose to develop a robust guidance and control system for the ADEPT (Adaptable Deployable Entry and Placement Technology) entry vehicle. A control-centric model of ADEPT will be developed to quantify the performance of candidate guidance and control architectures for both aerocapture and precision landing missions. The evaluation will be based on recent breakthroughs in constrained controllability/reachability analysis of control systems and constrained-based energy-minimum trajectory optimization for guidance development operating in complex environments.

Results of a national survey indicating information technology skills needed by nurses at time of entry into the work force.

PubMed

McCannon, Melinda; O'Neal, Pamela V

2003-08-01

A national survey was conducted to determine the information technology skills nurse administrators consider critical for new nurses entering the work force. The sample consisted of 2,000 randomly selected members of the American Organization of Nurse Executives. Seven hundred fifty-two usable questionnaires were returned, for a response rate of 38%. The questionnaire used a 5-point Likert scale and consisted of 17 items that assessed various technology skills and demographic information. The questionnaire was developed and pilot tested with content experts to establish content validity. Descriptive analysis of the data revealed that using e-mail effectively, operating basic Windows applications, and searching databases were critical information technology skills. The most critical information technology skill involved knowing nursing-specific software, such as bedside charting and computer-activated medication dispensers. To effectively prepare nursing students with technology skills needed at the time of entry into practice, nursing faculty need to incorporate information technology skills into undergraduate nursing curricula.

Structures and Mechanisms Design Concepts for Adaptive Deployable Entry Placement Technology

NASA Technical Reports Server (NTRS)

Yount, Bryan C.; Arnold, James O.; Gage, Peter J.; Mockelman, Jeffrey; Venkatapathy, Ethiraj

2012-01-01

System studies have shown that large deployable aerodynamic decelerators such as the Adaptive Deployable Entry and Placement Technology (ADEPT) concept can revolutionize future robotic and human exploration missions involving atmospheric entry, descent and landing by significantly reducing the maximum heating rate, total heat load, and deceleration loads experienced by the spacecraft during entry [1-3]. ADEPT and the Hypersonic Inflatable Aerodynamic Decelerator (HIAD) [4] share the approach of stowing the entry system in the shroud of the launch vehicle and deploying it to a much larger diameter prior to entry. The ADEPT concept provides a low ballistic coefficient for planetary entry by employing an umbrella-like deployable structure consisting of ribs, struts and a fabric cover that form an aerodynamic decelerator capable of undergoing hypersonic flight. The ADEPT "skin" is a 3-D woven carbon cloth that serves as a thermal protection system (TPS) and as a structural surface that transfers aerodynamic forces to the underlying ribs [5]. This paper focuses on design activities associated with integrating ADEPT components (cloth, ribs, struts and mechanisms) into a system that can function across all configurations and environments of a typical mission concept: stowed during launch, in-space deployment, entry, descent, parachute deployment and separation from the landing payload. The baseline structures and mechanisms were selected via trade studies conducted during the summer and fall of 2012. They are now being incorporated into the design of a ground test article (GTA) that will be fabricated in 2013. It will be used to evaluate retention of the stowed configuration in a launch environment, mechanism operation for release, deployment and locking, and static strength of the deployed decelerator. Of particular interest are the carbon cloth interfaces, underlying hot structure, (Advanced Carbon- Carbon ribs) and other structural components (nose cap, struts, and main body) designed to withstand the pressure and extremely high heating experienced during planetary entry.

Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Wercinski, Paul F.; Beck, Robin A. S.; Hamm, Kenneth R.; Yount, Bryan C.; Makino, A.; Smith, B.; Gage, P.; Prabhu, D.

2012-01-01

The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term; (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term; and (3) Heavy mass and human missions to Mars in the long term.

Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, E.; Wercinski, P.; Prabhu, D.

2012-01-01

The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (approximately 40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low-mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term and (3) Heavy mass and human missions to Mars in the long term.

Open Drug Discovery Teams: A Chemistry Mobile App for Collaboration.

PubMed

Ekins, Sean; Clark, Alex M; Williams, Antony J

2012-08-01

The Open Drug Discovery Teams (ODDT) project provides a mobile app primarily intended as a research topic aggregator of predominantly open science data collected from various sources on the internet. It exists to facilitate interdisciplinary teamwork and to relieve the user from data overload, delivering access to information that is highly relevant and focused on their topic areas of interest. Research topics include areas of chemistry and adjacent molecule-oriented biomedical sciences, with an emphasis on those which are most amenable to open research at present. These include rare and neglected diseases, and precompetitive and public-good initiatives such as green chemistry. The ODDT project uses a free mobile app as user entry point. The app has a magazine-like interface, and server-side infrastructure for hosting chemistry-related data as well as value added services. The project is open to participation from anyone and provides the ability for users to make annotations and assertions, thereby contributing to the collective value of the data to the engaged community. Much of the content is derived from public sources, but the platform is also amenable to commercial data input. The technology could also be readily used in-house by organizations as a research aggregator that could integrate internal and external science and discussion. The infrastructure for the app is currently based upon the Twitter API as a useful proof of concept for a real time source of publicly generated content. This could be extended further by accessing other APIs providing news and data feeds of relevance to a particular area of interest. As the project evolves, social networking features will be developed for organizing participants into teams, with various forms of communication and content management possible.

Open Drug Discovery Teams: A Chemistry Mobile App for Collaboration

PubMed Central

Ekins, Sean; Clark, Alex M; Williams, Antony J

2012-01-01

Abstract The Open Drug Discovery Teams (ODDT) project provides a mobile app primarily intended as a research topic aggregator of predominantly open science data collected from various sources on the internet. It exists to facilitate interdisciplinary teamwork and to relieve the user from data overload, delivering access to information that is highly relevant and focused on their topic areas of interest. Research topics include areas of chemistry and adjacent molecule-oriented biomedical sciences, with an emphasis on those which are most amenable to open research at present. These include rare and neglected diseases, and precompetitive and public-good initiatives such as green chemistry. The ODDT project uses a free mobile app as user entry point. The app has a magazine-like interface, and server-side infrastructure for hosting chemistry-related data as well as value added services. The project is open to participation from anyone and provides the ability for users to make annotations and assertions, thereby contributing to the collective value of the data to the engaged community. Much of the content is derived from public sources, but the platform is also amenable to commercial data input. The technology could also be readily used in-house by organizations as a research aggregator that could integrate internal and external science and discussion. The infrastructure for the app is currently based upon the Twitter API as a useful proof of concept for a real time source of publicly generated content. This could be extended further by accessing other APIs providing news and data feeds of relevance to a particular area of interest. As the project evolves, social networking features will be developed for organizing participants into teams, with various forms of communication and content management possible. PMID:23198003

Assessment of Knowledge and Skills Needed in Selected Engineering Technician Fields: Mechanical/Manufacturing/Industrial.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

A study identified the essential educational topics and the level of proficiency perceived to be required in these topics for selected two-year engineering technology programs in North Carolina. The four curricula studied were mechanical engineering technology, mechanical drafting and design technology, manufacturing engineering technology, and…

Research on the Correlations among Mobile Learning Perception, Study Habits, and Continuous Learning

ERIC Educational Resources Information Center

Wu, Wen-Chun; Perng, Yeng-Hong

2016-01-01

In addition to the rapidly developed Internet information technology, the admission to secondary schools has changed from single entry to multiple entries, among which the performance of Basic Competence Test and at schools have replaced Joint University Programs Admissions System. Traditional instruction therefore could no longer cope with such…

Dental Laboratory Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard dental laboratory technology curriculum for both diploma programs and associate degree programs in technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the dental laboratory technology field. The general information section contains the…

Information Technology in Education: The Best of ERIC.

ERIC Educational Resources Information Center

Ely, Donald P.

This publication highlights 48 recent ERIC listings which help to explain the variety of emerging technologies for the delivery of information in educational settings. Specific technologies addressed include cable television, electronic mail, satellite communication, teleconferencing, videodisc, and videotex. Entries were selected for inclusion…

The Electronic Encyclopedia of Earthquakes

NASA Astrophysics Data System (ADS)

Benthien, M.; Marquis, J.; Jordan, T.

2003-12-01

The Electronic Encyclopedia of Earthquakes is a collaborative project of the Southern California Earthquake Center (SCEC), the Consortia of Universities for Research in Earthquake Engineering (CUREE) and the Incorporated Research Institutions for Seismology (IRIS). This digital library organizes earthquake information online as a partner with the NSF-funded National Science, Technology, Engineering and Mathematics (STEM) Digital Library (NSDL) and the Digital Library for Earth System Education (DLESE). When complete, information and resources for over 500 Earth science and engineering topics will be included, with connections to curricular materials useful for teaching Earth Science, engineering, physics and mathematics. Although conceived primarily as an educational resource, the Encyclopedia is also a valuable portal to anyone seeking up-to-date earthquake information and authoritative technical sources. "E3" is a unique collaboration among earthquake scientists and engineers to articulate and document a common knowledge base with a shared terminology and conceptual framework. It is a platform for cross-training scientists and engineers in these complementary fields and will provide a basis for sustained communication and resource-building between major education and outreach activities. For example, the E3 collaborating organizations have leadership roles in the two largest earthquake engineering and earth science projects ever sponsored by NSF: the George E. Brown Network for Earthquake Engineering Simulation (CUREE) and the EarthScope Project (IRIS and SCEC). The E3 vocabulary and definitions are also being connected to a formal ontology under development by the SCEC/ITR project for knowledge management within the SCEC Collaboratory. The E3 development system is now fully operational, 165 entries are in the pipeline, and the development teams are capable of producing 20 new, fully reviewed encyclopedia entries each month. Over the next two years teams will complete 450 entries, which will populate the E3 collection to a level that fully spans earthquake science and engineering. Scientists, engineers, and educators who have suggestions for content to be included in the Encyclopedia can visit www.earthquake.info now to complete the "Suggest a Web Page" form.

Climate Outreach Using Regional Coastal Ocean Observing System Portals

NASA Astrophysics Data System (ADS)

Anderson, D. M.; Hernandez, D. L.; Wakely, A.; Bochenek, R. J.; Bickel, A.

2015-12-01

Coastal oceans are dynamic, changing environments affected by processes ranging from seconds to millennia. On the east and west coast of the U.S., regional observing systems have deployed and sustained a remarkable diverse array of observing tools and sensors. Data portals visualize and provide access to real-time sensor networks. Portals have emerged as an interactive tool for educators to help students explore and understand climate. Bringing data portals to outreach events, into classrooms, and onto tablets and smartphones enables educators to address topics and phenomena happening right now. For example at the 2015 Charleston Science Technology Engineering and Math (STEM) Festival, visitors navigated the SECOORA (Southeast Coastal Ocean Observing regional Association) data portal to view the real-time marine meteorological conditions off South Carolina. Map-based entry points provide an intuitive interface for most students, an array of time series and other visualizations depict many of the essential principles of climate science manifest in the coastal zone, and data down-load/ extract options provide access to the data and documentation for further inquiry by advanced users. Beyond the exposition of climate principles, the portal experience reveals remarkable technologies in action and shows how the observing system is enabled by the activity of many different partners.

Antibodies for HIV Prevention in young women

PubMed Central

Abdool Karim, Salim S.; Karim, Quarraisha Abdool; Baxter, Cheryl

2016-01-01

Purpose of review Young women in sub-Saharan Africa bear a disproportionate HIV burden. They urgently require new HIV prevention approaches that women can use. This review provides an overview of the use of antiretrovirals for HIV pre-exposure prophylaxis (PrEP), highlighting some of the challenges with this technology and explores the potential role of monoclonal antibodies (mAbs) for HIV prevention in women. Recent findings Recent findings on the initial steps in viral entry and establishment of a productive local infectious nidus in the vaginal epithelium has provided important clues for HIV prevention in the female genital tract. Topical and oral formulations of antiretroviral drugs have been shown to prevent HIV infection in women with varying levels of success, depending principally on adherence. Further, a number of new broad and potent mAbs have been isolated over the last 5 years. Non-human primate studies demonstrate that broadly neutralizing HIV mAbs can protect rhesus macaques from SHIV infection. These findings have created newfound enthusiasm for passive immunization as a potential prevention strategy for women. Summary If potent broadly neutralising mAbs are effective in preventing HIV infection in women, it could fill an important gap in HIV prevention technologies for young women, especially in Africa. PMID:25700207

Evaluation of a Prison Occupational Therapy Informal Education Program: A Pilot Study.

PubMed

Crabtree, Jeffrey L; Ohm, David; Wall, Jarrod M; Ray, Joseph

2016-12-01

This pilot study explored the strengths and weaknesses of an informal education program and identified elements of the program valued by participants. Participants were men living in a minimum security prison who had been incarcerated for ten or more years. The outside researcher was joined by three former program participants as co-researchers. Together, they interviewed 27 residents who completed the informal education program. Interviews were transcribed and de-identified. Researchers used the summative content analysis approach to analyze the data. Initial content analysis yielded five concepts: doing (engaging in purposeful activities); information (program handouts and discussions that included data and descriptions of all of the topics discussed); re-entry fears (socialization; making amends with victims and/or reuniting with family and friends); technology (includes, but not limited to, using smartphones, internet and other technology in all areas of occupation); and self-worth as a person. Further interpretation per the summative content analysis method yielded three themes: doing (engaged in purposeful activities), validation of self-worth (confirmation of being a valued human being in spite of having committed a serious crime) and concerns about the future (being able to successfully engage in virtually all occupations). Whilst informal education programs may help people who are incarcerated gain information, gain a sense of self-worth and allay some reentry fears, understanding the long-term affect such programs may have such as preparing them for successful re-entry to society or reducing recidivism rates, will require long-term follow-up. Regardless of the occupational therapy intervention, the practice of occupational therapy in the criminal justice system needs to be client-centred. Because of the small number of participants and limited access to participants, one should not generalize the findings of this study to other situations or populations. Further research to examine the effectiveness of an occupational therapy education program is warranted. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

A survey of U.S. Fish and Wildlife Service employees regarding topics for distance education-Summary report to respondents

USGS Publications Warehouse

Ratz, Joan M.; Shuster, Rudy M.; Marcy, Ann M.

2011-01-01

Our preliminary conclusion, based only on frequencies of responses and averages, is that our survey respondents appear to prefer traditional instructor-led training. However, they would still enroll in distance education courses. The distance education technologies of audio conferencing, computer-mediated training, and written resource provision are the technologies respondents reported being most familiar and accessible to them. For four of the five topic areas-creating and maintaining partnerships, technology, program planning and development, and outreach methods-the response frequencies and averages indicate that the topics were viewed as both relevant and important. Respondents were more neutral regarding the relevance and importance of the topic of evaluation methods. Respondents reported preferences for different types of information on different topics and also reported preferences in delivery mode of training for each topic area. Detailed results and conclusions will be included in the completion reports for the two studies.

Trajectory Guidance for Mars Robotic Precursors: Aerocapture, Entry, Descent, and Landing

NASA Technical Reports Server (NTRS)

Sostaric, Ronald R.; Zumwalt, Carlie; Garcia-Llama, Eduardo; Powell, Richard; Shidner, Jeremy

2011-01-01

Future crewed missions to Mars require improvements in landed mass capability beyond that which is possible using state-of-the-art Mars Entry, Descent, and Landing (EDL) systems. Current systems are capable of an estimated maximum landed mass of 1-1.5 metric tons (MT), while human Mars studies require 20-40 MT. A set of technologies were investigated by the EDL Systems Analysis (SA) project to assess the performance of candidate EDL architectures. A single architecture was selected for the design of a robotic precursor mission, entitled Exploration Feed Forward (EFF), whose objective is to demonstrate these technologies. In particular, inflatable aerodynamic decelerators (IADs) and supersonic retro-propulsion (SRP) have been shown to have the greatest mass benefit and extensibility to future exploration missions. In order to evaluate these technologies and develop the mission, candidate guidance algorithms have been coded into the simulation for the purposes of studying system performance. These guidance algorithms include aerocapture, entry, and powered descent. The performance of the algorithms for each of these phases in the presence of dispersions has been assessed using a Monte Carlo technique.

78 FR 48411 - Information Collection; Noninsured Crop Disaster Assistance Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... revised for more efficient data entry in the Web-enabled environment. Producers are no longer required to..., mechanical, or other technological collection techniques or other forms of information technology. All...

Innovative Technology in Automotive Technology

ERIC Educational Resources Information Center

Gardner, John

2007-01-01

Automotive Technology combines hands-on training along with a fully integrated, interactive, computerized multistationed facility. Our program is a competency based, true open-entry/open-exit program that utilizes flexible self-paced course outlines. It is designed around an industry partnership that promotes community and economic development,…

Radiological Technology. Secondary Curriculum Guide.

ERIC Educational Resources Information Center

Simpson, Bruce; And Others

This curriculum guide was designed for use in postsecondary radiological technology education programs in Georgia. Its purpose is to provide for the development of entry level skills in radiological technology in the areas of knowledge, theoretical structure, tool usage, diagnostic ability, related supportive skills, and occupational survival…

Automotive Technology. Career Education Guide.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC. European Area.

The curriculum guide is designed to provide students with realistic training in automotive technology theory and practice within the secondary educational framework and to prepare them for entry into an occupation or continuing postsecondary education. The learning modules are grouped into three areas: small engines, automotive technology, and…

Requisite Skills and Knowledge for Entry-Level IT Auditors

ERIC Educational Resources Information Center

Merhout, Jeffrey W.; Buchman, Sarah E.

2007-01-01

Information technology auditing has become a career in high demand in recent years due to factors such as increasing compliance requirements with regards to information technology governance. Nonetheless, many information technology, management information systems, and accounting information systems educators may not have paid significant…

Introduction to the Special Issue on Clinical Neuropsychology of Movement Disorders.

PubMed

Tröster, Alexander I

2017-11-01

The special issue on the clinical neuropsychology of movement disorders provides an overview for the non-subspecialist clinical neuropsychologist and other clinical neuroscientists of the neuropsychological features, assessment and treatment of Parkinson's disease and Lewy body dementias, atypical parkinsonian disorders (corticobasal syndrome, progressive supranuclear palsy, and multiple system atrophy), Huntington's disease, dystonia, and amyotrophic lateral sclerosis. Additionally, articles provide overviews of neuropsychological and ethical issues related to deep brain stimulation and a discussion of non-pharamcologic and non-invasive treatment of cognitive dysfunction in Parkinson's disease. A search of PubMed using neuropsycholog* and parkinson* as search terms indicates that the number of articles dealing with neuropsychology of parkinsonian disorders has more than doubled in each of the past three decades (1990-99:269 entries, 2000-09:575 entries, 2010-17:967 entries). This rapid growth of research makes a special issue on the topic very timely. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Design of a Template for Handwriting Based Hindi Text Entry in Handheld Devices

NASA Astrophysics Data System (ADS)

Gangopadhyay, Diya; Vasal, Ityam; Yammiyavar, Pradeep

Mobile phones, in the recent times, have become affordable and accessible to a wider range of users including the hitherto technologically and economically under-represented segments. Indian users are a gigantic consumer base for mobile phones. With Hindi being one of the most widely spoken languages in the country and the primary tool of communication for about a third of its population, an effective solution for Hindi text entry in mobile devices is expected to be immensely useful to the non English speaking users. This paper proposes a mobile phone handwriting based text entry solution for Hindi language, which allows for an easy text entry method, while facilitating better recognition accuracy.

A Short Bibliography in the English Language Material on Korea and its Education.

ERIC Educational Resources Information Center

Kang, Kilsoo

This specialized bibliography is intended to fill a definite student need to the scarcity of literature on this topic. Total entries number about 128 and are limited to materials in English available at the University of Pittsburgh. Two main sections of the bibliography are: 1) Education in Korea, and 2) Korean Studies. Cited in the former are…

Introduction to Heating, Ventilation and Air Conditioning (HVAC). Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Associated General Contractors of America, Washington, DC.

This module on introductory heating, ventilating, and air conditioning (HVAC) is one of a series of modules designed to teach basic skills necessary for entry-level employment in this field. The module contains four instructional units that cover the following topics: (1) HVAC materials; (2) HVAC tools; (3) HVAC layout; and (4) HVAC basic skills.…

Energy: An annotated selected bibliography

NASA Technical Reports Server (NTRS)

Blow, S. J. (Compiler); Peacock, R. W. (Compiler); Sholy, J. J. (Compiler)

1979-01-01

This updated bibliography contains approximately 7,000 selected references on energy and energy related topics from bibliographic and other data sources from June 1977. Under each subject heading the entries are arranged by the date, with the latest works first. Geothermal, solar, wind, and ocean/water power sources are included. Magnetohydrodynamics and electrohydrodynamics, electric power engineering, automotive power plants, and energy storage are also covered.

Inquiry, Critique, and Dissemination of Knowledge: Graduate Students Contributing to Wikipedia

ERIC Educational Resources Information Center

Simmons, Nicola

2013-01-01

Graduate students use existing knowledge and are ultimately expected to add to that knowledge. Students in a Masters of Education entry course were asked to find a Wikipedia page related to the course topics, critique it, and make improvements to it to begin to develop these skills. In this paper, I examine ways in which their perspectives were…

On the Social Psychology of Higher Education: A Bibliography of Alexander W. Astin. Public Administration Series Bibliography, P-688.

ERIC Educational Resources Information Center

Quay, Richard H.

A bibliography of articles by Alexander W. Astin on the social psychology of higher education is presented. Entries are presented by year, starting with 1980 and dating back to 1956. Topics that are covered include: equal access to higher education, student persistence and attrition, higher education policy, selective admissions and open…

Changes, disruption and innovation: An investigation of the introduction of new health information technology in a microbiology laboratory.

PubMed

Toouli, George; Georgiou, Andrew; Westbrook, Johanna

2012-01-01

It is expected that health information technology (HIT) will deliver a safer, more efficient and effective health care system. The aim of this study was to undertake a qualitative and video-ethnographic examination of the impact of information technologies on work processes in the reception area of a Microbiology Department, to ascertain what changed, how it changed and the impact of the change. The setting for this study was the microbiology laboratory of a large tertiary hospital in Sydney. The study consisted of qualitative (interview and focus group) data and observation sessions for the period August 2005 to October 2006 along with video footage shot in three sessions covering the original system and the two stages of the Cerner implementation. Data analysis was assisted by NVivo software and process maps were produced from the video footage. There were two laboratory information systems observed in the video footage with computerized provider order entry introduced four months later. Process maps highlighted the large number of pre data entry steps with the original system whilst the newer system incorporated many of these steps in to the data entry stage. However, any time saved with the new system was offset by the requirement to complete some data entry of patient information not previously required. Other changes noted included the change of responsibilities for the reception staff and the physical changes required to accommodate the increased activity around the data entry area. Implementing a new HIT is always an exciting time for any environment but ensuring that the implementation goes smoothly and with minimal trouble requires the administrator and their team to plan well in advance for staff training, physical layout and possible staff resource reallocation.

Overview of Heatshield for Extreme Entry Environment Technology (HEEET)

NASA Technical Reports Server (NTRS)

Driver, David M.; Ellerby, Donald T.; Gasch, Matthew J.; Mahzari, Milad; Milos, Frank S.; Nishioka, Owen S.; Stackpoole, Margaret M.; Venkatapathy, Ethiraj; Young, Zion W.; Gage, Peter J.;

Entry Descent and Landing Workshop Proceedings. Volume 1; Inflatable Reentry Vehicle Experiment-3 (IRVE-3) Project Overview & Instrumentation

NASA Technical Reports Server (NTRS)

Dillman, Robert

2015-01-01

Entry mass at Mars is limited by the payload size that can be carried by a rigid capsule that can fit inside the launch vehicle fairing. Landing altitude at Mars is limited by ballistic coefficient (mass per area) of entry body. Inflatable technologies allow payload to use full diameter of launch fairing, and deploy larger aeroshell before atmospheric interface, landing more payload at a higher altitude. Also useful for return of large payloads from Low Earth Orbit (LEO).

Saturn Uranus atmospheric entry probe mission spacecraft system definition study

NASA Technical Reports Server (NTRS)

1973-01-01

The modifications required of the Pioneer F/G spacecraft design for it to deliver an atmospheric entry probe to the planets Saturn and Uranus are investigated. It is concluded that it is feasible to conduct such a mission within the constraints and interfaces defined. The spacecraft required to perform the mission is derived from the Pioneer F/G design, and the modifications required are generally routinely conceived and executed. The entry probe is necessarily a new design, although it draws on the technology of past, present, and imminent programs of planetary atmospheric investigations.

Study on goaf gas control technology of gob-side entry driving

NASA Astrophysics Data System (ADS)

Ren, Qihan; Yuan, Benqing; Li, Qiansi

2018-01-01

The 1112 (1) track gate roadway of Gu Qiao coal mine of Huainan mining group adopt the method of gob-side entry driving, the gas emission is large during the driving of the roadway, the gas in the goaf seriously influences the safe driving of the roadway. Equalizing method, drilling drainage method, jet grouting method and other goaf gas controlling measures has been adopted. Finally, it effectively solves the safety threat of gas in goaf to roadway driving, it provides a good reference for the gas control of the gob-side entry.

An Application of Fuzzy Theory to Technical Competency Analysis for the Entry-Level Electronic Technician.

ERIC Educational Resources Information Center

Chang, Liang-Te; And Others

A study was conducted to develop the electronic technical competencies of duty and task analysis by using a revised DACUM (Developing a Curriculum) method, a questionnaire survey, and a fuzzy synthesis operation. The revised DACUM process relied on inviting electronics trade professionals to analyze electronic technology for entry-level…

Guide to Special Information in Scientific and Engineering Journals.

ERIC Educational Resources Information Center

Harris, Mary Elizabeth

This update of a 1983 annotated bibliography lists 298 special features or special issues of science and technology periodicals with emphasis on compilations of information that appear in periodicals on a regular basis. In addition to the 203 entries listed in the original edition, 95 new entries are included. Subjects covered in the guide include…

Operating Room Technology. Post Secondary Curriculum Guide.

ERIC Educational Resources Information Center

Simpson, Bruce; And Others

This curriculum guide was designed for use in postsecondary operating room technology education programs in Georgia. Its purpose is to provide for development of entry level skills in operating room technology in the areas of knowledge, theoretical structure, tool usage, diagnostic ability, related supportive skills, and occupational survival…

Status of Sample Return Propulsion Technology Development Under NASA's ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Glaab, Louis J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Peterson, Todd T.

2012-01-01

The In-Space Propulsion Technology (ISPT) program was tasked in 2009 to start development of propulsion technologies that would enable future sample return missions. ISPT s sample return technology development areas are diverse. Sample Return Propulsion (SRP) addresses electric propulsion for sample return and low cost Discovery-class missions, propulsion systems for Earth Return Vehicles (ERV) including transfer stages to the destination, and low technology readiness level (TRL) advanced propulsion technologies. The SRP effort continues work on HIVHAC thruster development to transition into developing a Hall-effect propulsion system for sample return (ERV and transfer stages) and low-cost missions. Previous work on the lightweight propellant-tanks continues for sample return with direct applicability to a Mars Sample Return (MSR) mission with general applicability to all future planetary spacecraft. The Earth Entry Vehicle (EEV) work focuses on building a fundamental base of multi-mission technologies for Earth Entry Vehicles (MMEEV). The main focus of the Planetary Ascent Vehicles (PAV) area is technology development for the Mars Ascent Vehicle (MAV), which builds upon and leverages the past MAV analysis and technology developments from the Mars Technology Program (MTP) and previous MSR studies

STS-121: Discovery Entry Flight Director Post Landing Press Conference

NASA Technical Reports Server (NTRS)

2006-01-01

Steve Stitch, STS-121 Entry Flight Director, and Wayne Hale, Space Shuttle Program is shown in this post landing press conference. Steve Stitch begins with discussing the following topics: 1) Weather at Kennedy Space Center; 2) Gap filler protrusion; 3) De-orbit burn; 4) Space Shuttle Landing; 5) Global Position Satellite System (GPSS) performance; and 6) Post-landing rain showers. Wayne Hale discusses external tank observations at launch and the goals that were obtained by this flight, which are to deliver 4000 pounds of scientific equipment, increase the crew members to three on the International Space Station (ISS), and repair the ISS. Questions from the press on lessons learned from the Auxiliary Power Unit (APU) leak, and flight readiness reviews are addressed.

Fundamentals of Library Automation and Technology. Participant Workbook.

ERIC Educational Resources Information Center

Bridge, Frank; Walton, Robert

This workbook presents outlines of topics to be covered during a two-day workshop on the fundamentals for library automation. Topics for the first day include: (1) Introduction; (2) Computer Technology--A Historical Overview; (3) Evolution of Library Automation; (4) Computer Hardware Technology--An Introduction; (5) Computer Software…

A Study on Re-entry Predictions of Uncontrolled Space Objects for Space Situational Awareness

NASA Astrophysics Data System (ADS)

Choi, Eun-Jung; Cho, Sungki; Lee, Deok-Jin; Kim, Siwoo; Jo, Jung Hyun

2017-12-01

The key risk analysis technologies for the re-entry of space objects into Earth’s atmosphere are divided into four categories: cataloguing and databases of the re-entry of space objects, lifetime and re-entry trajectory predictions, break-up models after re-entry and multiple debris distribution predictions, and ground impact probability models. In this study, we focused on re- entry prediction, including orbital lifetime assessments, for space situational awareness systems. Re-entry predictions are very difficult and are affected by various sources of uncertainty. In particular, during uncontrolled re-entry, large spacecraft may break into several pieces of debris, and the surviving fragments can be a significant hazard for persons and properties on the ground. In recent years, specific methods and procedures have been developed to provide clear information for predicting and analyzing the re-entry of space objects and for ground-risk assessments. Representative tools include object reentry survival analysis tool (ORSAT) and debris assessment software (DAS) developed by National Aeronautics and Space Administration (NASA), spacecraft atmospheric re-entry and aerothermal break-up (SCARAB) and debris risk assessment and mitigation analysis (DRAMA) developed by European Space Agency (ESA), and semi-analytic tool for end of life analysis (STELA) developed by Centre National d’Etudes Spatiales (CNES). In this study, various surveys of existing re-entry space objects are reviewed, and an efficient re-entry prediction technique is suggested based on STELA, the life-cycle analysis tool for satellites, and DRAMA, a re-entry analysis tool. To verify the proposed method, the re-entry of the Tiangong-1 Space Lab, which is expected to re-enter Earth’s atmosphere shortly, was simulated. Eventually, these results will provide a basis for space situational awareness risk analyses of the re-entry of space objects.

ENTRYSAT: A 3U Cubesat to Study the Re-Entry Atmospheric Environment

NASA Astrophysics Data System (ADS)

Garcia, R. F.; Chaix, J.; Mimoun, D.; EntrySat student Team

2014-04-01

The EntrySat is a 3U CubeSat designed to study the uncontrolled atmospheric re-entry. The project, developed by ISAE in collaboration with ONERA, is funded by CNES and is intended to be launched in January 2016, in the context of the QB50 network. The scientific goal is to relate the kinematics of the satellite with the aerothermodynamic environment during re-entry. In particular, data will be compared with the computations of MUSIC/FAST, a new 6-degree of freedom code developed by ONERA to predict the trajectory of space debris. According to these requirements, the satellite will measure the temperature, pressure, heat flux, and drag force during re-entry, as well as the trajectory and attitude of the satellite. One of the major technological challenges is the retrieval of data during the re-entry phase, which will be based on the Iridium satellite network. The system design is based on the use of commercial COTS components, and is mostly developed by students from ISAE. As such, the EntrySat has an important educational value in the formation of young engineers.

Application of a fast skyline computation algorithm for serendipitous searching problems

NASA Astrophysics Data System (ADS)

Koizumi, Kenichi; Hiraki, Kei; Inaba, Mary

2018-02-01

Skyline computation is a method of extracting interesting entries from a large population with multiple attributes. These entries, called skyline or Pareto optimal entries, are known to have extreme characteristics that cannot be found by outlier detection methods. Skyline computation is an important task for characterizing large amounts of data and selecting interesting entries with extreme features. When the population changes dynamically, the task of calculating a sequence of skyline sets is called continuous skyline computation. This task is known to be difficult to perform for the following reasons: (1) information of non-skyline entries must be stored since they may join the skyline in the future; (2) the appearance or disappearance of even a single entry can change the skyline drastically; (3) it is difficult to adopt a geometric acceleration algorithm for skyline computation tasks with high-dimensional datasets. Our new algorithm called jointed rooted-tree (JR-tree) manages entries using a rooted tree structure. JR-tree delays extend the tree to deep levels to accelerate tree construction and traversal. In this study, we presented the difficulties in extracting entries tagged with a rare label in high-dimensional space and the potential of fast skyline computation in low-latency cell identification technology.

Introduction to Surgical Technology. Teacher Edition.

ERIC Educational Resources Information Center

Bushey, Vicki; And Others

This instructor's manual contains 14 units of instruction for a course on surgical technology designed to include the entry-level competencies students need to enter any of the more advanced surgical technology courses. Each unit includes some or all of the following basic components of a unit of instruction: objective sheet, suggested activities…

Environmental Technology.

ERIC Educational Resources Information Center

Columbus State Community Coll., OH.

This document contains materials developed for and about the environmental technology tech prep program of the South-Western City Schools in Ohio. Part 1 begins with a map of the program, which begins with an environmental science technology program in grades 11 and 12 that leads to entry-level employment or a 2-year environmental technology…

Automotive Diagnostic Technologies.

ERIC Educational Resources Information Center

Columbus State Community Coll., OH.

This document contains materials developed for and about the automotive diagnostic technologies tech prep program of the South-Western City Schools in Ohio. Part 1 begins with a map of the program, which begins with an automotive/diagnostic technologies program in grades 11 and 12 that leads to entry-level employment or a 2-year automotive…

Using Android and Open Data Kit Technology in Data Management for Research in Resource-Limited Settings in the Niger Delta Region of Nigeria: Cross-Sectional Household Survey

PubMed Central

Maleghemi, Sylvester

2017-01-01

Background Data collection in Sub-Saharan Africa has traditionally been paper-based. However, the popularization of Android mobile devices and data capture software has brought paperless data management within reach. We used Open Data Kit (ODK) technology on Android mobile devices during a household survey in the Niger Delta region of Nigeria. Objective The aim of this study was to describe the pros and cons of deploying ODK for data management. Methods A descriptive cross-sectional household survey was carried out by 6 data collectors between April and May 2016. Data were obtained from 1706 persons in 601 households across 6 communities in 3 states in the Niger Delta. The use of Android mobile devices and ODK technology involved form building, testing, collection, aggregation, and download for data analysis. The median duration for data collection per household and per individual was 25.7 and 9.3 min, respectively. Results Data entries per device ranged from 33 (33/1706, 1.93%) to 482 (482/1706, 28.25%) individuals between 9 (9/601, 1.5%) and 122 (122/601, 20.3%) households. The most entries (470) were made by data collector 5. Only 2 respondents had data entry errors (2/1706, 0.12%). However, 73 (73/601, 12.1%) households had inaccurate date and time entries for when data collection started and ended. The cost of deploying ODK was estimated at US $206.7 in comparison with the estimated cost of US $466.7 for paper-based data management. Conclusions We found the use of mobile data capture technology to be efficient and cost-effective. As Internet services improve in Africa, we advocate their use as effective tools for health information management. PMID:29191798

High-Tech Opens Doors.

ERIC Educational Resources Information Center

Eichleay, Kristen; Pressman, Harvey

1987-01-01

Exemplary projects which help disabled people use technology (particularly computers) expand their employment opportunities include: Project Entry (Seattle); Georgia Computer Programmer Project (Atlanta); Perkins Project with Industry (Watertown, Massachusetts); Project Byte (Newton Massachusetts); Technology Relevant to You (St. Louis); Special…

Improving Global Access to New Vaccines: Intellectual Property, Technology Transfer, and Regulatory Pathways

PubMed Central

2014-01-01

The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers. PMID:25211753

Overview of the NASA Entry, Descent and Landing Systems Analysis Exploration Feed-Forward Study

NASA Technical Reports Server (NTRS)

DwyerCianciolo, Alicia M.; Zang, Thomas A.; Sostaric, Ronald R.; McGuire, M. Kathy

2011-01-01

Technology required to land large payloads (20 to 50 mt) on Mars remains elusive. In an effort to identify the most viable investment path, NASA and others have been studying various concepts. One such study, the Entry, Descent and Landing Systems Analysis (EDLSA) Study [1] identified three potential options: the rigid aeroshell, the inflatable aeroshell and supersonic retropropulsion (SRP). In an effort to drive out additional levels of design detail, a smaller demonstrator, or exploration feed-forward (EFF), robotic mission was devised that utilized two of the three (inflatable aeroshell and SRP) high potential technologies in a configuration to demonstrate landing a two to four metric ton payload on Mars. This paper presents and overview of the maximum landed mass, inflatable aeroshell controllability and sensor suite capability assessments of the selected technologies and recommends specific technology areas for additional work.

Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways.

PubMed

Crager, Sara Eve

2014-11-01

The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

[Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways].

PubMed

Crager, Sara Eve

2015-01-01

The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

Digital Paper Technologies for Topographical Applications

DTIC Science & Technology

2011-09-19

measures examine were training time for each method, time for entry offeatures, procedural errors, handwriting recognition errors, and user preference...time for entry of features, procedural errors, handwriting recognition errors, and user preference. For these metrics, temporal association was...checkbox, text restricted to a specific list of values, etc.) that provides constraints to the handwriting recognizer. When the user fills out the form

Cholesteric Liquid Crystal Based Reflex Color Reflective Displays

NASA Astrophysics Data System (ADS)

Khan, Asad

2012-02-01

Bistable color cholesteric liquid crystal displays are unique LCDs that exhibit high reflectivity, good contrast, extremely low power operation, and are amenable to versatile roll-to-roll manufacturing. The display technology, now branded as Reflex has been in commercialized products since 1996. It has been the subject of extensive research and development globally by a variety of parties in both academic and industrial settings. Today, the display technology is in volume production for applications such as dedicated eWriters (Boogie Board), full color electronic skins (eSkin), and displays for smart cards. The flexibility comes from polymerization induced phase separation using unique materials unparalleled in any other display technology. The blend of monomers, polymers, cross linkers, and other components along with nematic liquid crystals and chiral dopants is created and processed in such ways so as to enable highly efficient manufactrable displays using ultra thin plastic substrates -- often as thin as 50μm. Other significant aspects include full color by stacking or spatial separation, night vision capability, ultra high resolution, as well as active matrix capabilities. Of particular note is the stacking approach of Reflex based displays to show full color. This approach for reflective color displays is unique to this technology. Owing to high transparency in wavelength bands outside the selective reflection band, three primarily color layers can be stacked on top of each other and reflect without interfering with other layers. This highly surprising architecture enables the highest reflectivity of any other reflective electronic color display technology. The optics, architecture, electro-topics, and process techniques will be discussed. This presentation will focus on the physics of the core technology and color, it's evolution from rigid glass based displays to flexible displays, development of products from the paradigm shifting concepts to consumer products and related markets. This is a development that spans a wide space of highly technical development and fundamental science to products and commercialization to enable the entry of the technology into consumer markets.

Comparative Responses from Students, Faculty, and Administration to the Packaging of the Entry College Course, English 131. Curriculum Development.

ERIC Educational Resources Information Center

Bass, Donald G.

The practicum is the creation of a course orientation module for a new introductory English design. The module explains the course topics, the requirements, and the learning settings. Requirements call for specific skill levels in reading, writing, and discussion. Students will be learning in conference, in the community, in small groups, and in…

Business Education Index 1993. Index of Business Education Articles and Research Studies Complied from a Selected List of Periodicals and Yearbooks Published during the Year 1993.

ERIC Educational Resources Information Center

Graves, Pat R., Ed.; And Others

1993-01-01

This publication contains approximately 3,800 entries on business education topics indexed from business education publications and those related to business education. Priority in indexing was given to journals that are essential to research and teaching in the broad business education spectrum with emphasis on information systems (including…

A Nutrition Education Bibliography for Teachers of All Subjects and Grade Levels. Revised Edition, 1978. Developed through an ESEA Title IVC Project in Nutrition Education for Schools.

ERIC Educational Resources Information Center

Luzerne Intermediate Unit 18, Kingston, PA.

This bibliography lists a library collection of educational resources on topics in nutrition which are available to elementary and secondary teachers who need information and instructional aids to help them implement nutrition education into the existing curriculum. Two hundred seven entries of nutrition education resources comprise this…

Selected Bibliography and Abstracts of Educational Materials in Pakistan. Volume 6, Number 4, 1972. Period Covered October-December 1972.

ERIC Educational Resources Information Center

Saad, Geti, Comp.

This annotated bibliography lists 104 entries of selected educational materials in Pakistan covering the period from October to December 1972. The materials are organized into 30 topical categories as listed for related document ED 074 847. A new section is added on nationalization of education. The materials are drawn from a variety of Pakistani…

Written Language and Writing Abilities: Abstracts of Doctoral Dissertations Published in "Dissertation Abstracts International," July 1979 through June 1980 (Vol. 40 Nos. 1 through 12).

ERIC Educational Resources Information Center

ERIC Clearinghouse on Reading and Communication Skills, Urbana, IL.

This collection of abstracts is part of a continuing series providing information on recent doctoral dissertations. The 21 titles deal with the following topics: (1) the adolescent writer's developing sense of audience; (2) the entry skills, methods, and attitudes of intermediate composition students in postsecondary composition programs; (3)…

The Use of Music as a Way of Formation of Communicative Skills of Students in Teaching English Language

ERIC Educational Resources Information Center

Akhmadullina, Rimma M.; Abdrafikova, Albina R.; Vanyukhina, Nadezhda V.

2016-01-01

The relevance of the topic is specified by the necessity of improving the quality of students' training in foreign languages for their mobility in terms of Russia`s entry into the Bologna process. This article is intended to support the effective use of instructional techniques of music and musical information with the aim of formation of…

Woven Thermal Protection System (WTPS) a Novel Approach to Meet Nasa's Most Demanding Reentry Missions

NASA Technical Reports Server (NTRS)

Stackpoole, Margaret M.; Ellerby, Donald T.; Gasch, Matt; Ventkatapathy, Ethiraj; Beerman, Adam; Boghozian, Tane; Gonzales, Gregory; Feldman, Jay; Peterson, Keith; Prabhu, Dinesh

2014-01-01

NASA's future robotic missions to Venus and other planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of current mid density ablators (PICA or Avcoat). Therefore mission planners assume the use of a fully dense carbon phenolic heatshield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic is a robust TPS, however, its high density and thermal conductivity constrain mission planners to steep entries, high fluxes, pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose certification challenges in existing ground based test facilities. In 2012 the Game Changing Development Program in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System to meet the needs of NASA's most challenging entry missions. This presentation will summarize the maturation of the WTPS project.

Use of acoustics to deter bark beetles from entering tree material.

PubMed

Aflitto, Nicholas C; Hofstetter, Richard W

2014-12-01

Acoustic technology is a potential tool to protect wood materials and eventually live trees from colonization by bark beetles. Bark beetles such as the southern pine beetle Dendroctonus frontalis, western pine beetle D. brevicomis and pine engraver Ips pini (Coleoptera: Curculionidae) use chemical and acoustic cues to communicate and to locate potential mates and host trees. In this study, the efficacy of sound treatments on D. frontalis, D. brevicomis and I. pini entry into tree materials was tested. Acoustic treatments significantly influenced whether beetles entered pine logs in the laboratory. Playback of artificial sounds reduced D. brevicomis entry into logs, and playback of stress call sounds reduced D. frontalis entry into logs. Sound treatments had no effect on I. pini entry into logs. The reduction in bark beetle entry into logs using particular acoustic treatments indicates that sound could be used as a viable management tool. © 2013 Society of Chemical Industry.

Mediagraphy: Print and Nonprint Resources.

ERIC Educational Resources Information Center

Price, Brooke, Ed.

2001-01-01

Lists media-related journals, books, ERIC documents, journal articles, and nonprint resources published in 1999-2000. The annotated entries are classified under the following headings: artificial intelligence; computer assisted instruction; distance education; educational research; educational technology; information science and technology;…

Mediagraphy: Print and Nonprint Resources.

ERIC Educational Resources Information Center

Burdett, Anna E.

2003-01-01

Lists media-related journals, books, ERIC documents, journal articles, and nonprint resources published in 2001-2002. The annotated entries are classified under the following headings: artificial intelligence; computer assisted instruction; distance education; educational research; educational technology; information science and technology;…

Programming as an Instrument for Community Involvement: Designing Topical Television Programs for Rural Adult Audiences. Satellite Technology Demonstration Technical Report No. 0503.

ERIC Educational Resources Information Center

Darby, Keith

The overall objective of the Satellite Technology Demonstration (STD) was to test the feasibility of delivering television Programing via satellite to isolated, rural locations. Community members at various STD sites were surveyed to determine how they felt about a variety of topics which were planned for an adult evening series. Topics in…

Non-mechanical beam control for entry, descent and landing laser radar (Conference Presentation)

NASA Astrophysics Data System (ADS)

Stockley, Jay E.; Kluttz, Kelly; Hosting, Lance; Serati, Steve; Bradley, Cullen P.; McManamon, Paul F.; Amzajerdian, Farzin

2017-05-01

Laser radar for entry, descent, and landing (EDL) applications as well as the space docking problem could benefit from a low size, weight, and power (SWaP) beam control system. Moreover, an inertia free approach employing non-mechanical beam control is also attractive for laser radar that is intended to be employed aboard space platforms. We are investigating a non-mechanical beam steering (NMBS) sub-system based on liquid crystal polarization grating (LCPG) technology with emphasis placed on improved throughput and significant weight reduction by combining components and drastically reducing substrate thicknesses. In addition to the advantages of non-mechanical, gimbal free beam control, and greatly improved SWaP, our approach also enables wide area scanning using a scalable architecture. An extraterrestrial application entails additional environmental constraints, consequently an environmental test plan tailored to an EDL mission will also be discussed. In addition, we will present advances in continuous fine steering technology which would complement the coarse steering LCPG technology. A low-SWaP, non-mechanical beam control system could be used in many laser radar remote sensing applications including meteorological studies and agricultural or environmental surveys in addition to the entry, descent, and landing application.

Adaptable Deployable Entry & Placement Technology (ADEPT) for Cubesat Delivery to Mars Surface

NASA Technical Reports Server (NTRS)

Wercinski, Paul

2014-01-01

The Adaptable, Deployable Entry and Placement Technology (ADEPT), uses a mechanical skeleton to deploy a revolutionary carbon fabric system that serves as both heat shield and primary structure during atmospheric entry. The NASA ADEPT project, currently funded by the Game Changing Development Program in STMD is currently focused on 1m class hypersonic decelerators for the delivery of very small payloads ( 5 kg) to locations of interest in an effort to leverage low-cost platforms to rapidly mature the technology while simultaneously delivering high-value science. Preliminary mission design and aerothermal performance testing in arcjets have shown the ADEPT system is quite capable of safe delivery of cubesats to Mars surface. The ability of the ADEPT to transit to Mars in a stowed configuration (similar to an umbrella) provides options for integration with the Mars 2020 cruise stage, even to consider multiple ADEPTs. System-level test campaigns are underway for FY15 execution or planning for FY16. These include deployment testing, wind tunnel testing, system-level arc jet testing, and a sounding rocket flight test. The goal is system level maturation (TRL 6) at a 1m class Mars design reference mission configuration.

Maraia Capsule Flight Testing and Results for Entry, Descent, and Landing

NASA Technical Reports Server (NTRS)

Sostaric, Ronald R.; Strahan, Alan L.

2016-01-01

The Maraia concept is a modest size (150 lb., 30" diameter) capsule that has been proposed as an ISS based, mostly autonomous earth return capability to function either as an Entry, Descent, and Landing (EDL) technology test platform or as a small on-demand sample return vehicle. A flight test program has been completed including high altitude balloon testing of the proposed capsule shape, with the purpose of investigating aerodynamics and stability during the latter portion of the entry flight regime, along with demonstrating a potential recovery system. This paper includes description, objectives, and results from the test program.

Campus Technology Innovators Awards 2011: Technology All-Stars

ERIC Educational Resources Information Center

Lloyd, Meg; Raths, David

2011-01-01

Out of a total of 393 entries for the 2011 Campus Technology Innovators award, 10 winners rose to the top in six categories: (1) Leadership, Governance, and Policy; (2) Teaching and Learning; (3) Student Systems and Services; (4) Administrative Systems; (5) IT Infrastructure and Systems; and (6) Education Futurists. These innovative IT leaders…

Performance of Building Technology Graduates in the Construction Industry in Ghana

ERIC Educational Resources Information Center

Ayarkwa, J.; Dansoh, Ayirebi; Adinyira, E.; Amoah, P.

2011-01-01

Purpose: This paper aims to assess the perception of the Ghanaian construction industry of the performance of entry-level building technology graduates. Also, other non-technical skills or attributes expected from building technology graduates are to be compared with the actual proficiency of the graduates. Design/methodology/approach: The…

Innovation for maintenance technology improvements

NASA Technical Reports Server (NTRS)

Shives, T. R. (Editor); Willard, W. A. (Editor)

1982-01-01

A group of 34 submitted entries (32 papers and 2 abstracts) from the 33rd meeting of the Mechanical Failures Prevention Group whose subject was maintenance technology improvement through innovation. Areas of special emphasis included maintenance concepts, maintenance analysis systems, improved maintenance processes, innovative maintenance diagnostics and maintenance indicators, and technology improvements for power plant applications.

Administrative Perspectives on Technology Integration: The Globaloria--MyGLife Program in West Virginia

ERIC Educational Resources Information Center

Chapman, William E., Jr.

2009-01-01

The reputed benefits of using technology in schools have been the topic of many research studies. When the World Wide Workshop Foundation implemented their Globaloria program The reputed benefits of using technology in schools have been the topic of many research studies. When the World Wide Workshop Foundation implemented their Globaloria program…

Conformal Ablative Thermal Protection System for Planetary and Human Exploration Missions: Overview of the Technology Maturation Efforts Funded by NASA's Game Changing Development Program

NASA Technical Reports Server (NTRS)

Beck, Robin A.; Arnold, James O.; Gasch, Matthew J.; Stackpoole, Margaret M.; Fan, Wendy; Szalai, Christine E.; Wercinski, Paul F.; Venkatapathy, Ethiraj

2012-01-01

The Office of Chief Technologist (OCT), NASA has identified the need for research and technology development in part from NASA's Strategic Goal 3.3 of the NASA Strategic Plan to develop and demonstrate the critical technologies that will make NASA's exploration, science, and discovery missions more affordable and more capable. Furthermore, the Game Changing Development Program (GCDP) is a primary avenue to achieve the Agency's 2011 strategic goal to "Create the innovative new space technologies for our exploration, science, and economic future." In addition, recently released "NASA space Technology Roadmaps and Priorities," by the National Research Council (NRC) of the National Academy of Sciences stresses the need for NASA to invest in the very near term in specific EDL technologies. The report points out the following challenges (Page 2-38 of the pre-publication copy released on February 1, 2012): Mass to Surface: Develop the ability to deliver more payload to the destination. NASA's future missions will require ever-greater mass delivery capability in order to place scientifically significant instrument packages on distant bodies of interest, to facilitate sample returns from bodies of interest, and to enable human exploration of planets such as Mars. As the maximum mass that can be delivered to an entry interface is fixed for a given launch system and trajectory design, the mass delivered to the surface will require reduction in spacecraft structural mass; more efficient, lighter thermal protection systems; more efficient lighter propulsion systems; and lighter, more efficient deceleration systems. Surface Access: Increase the ability to land at a variety of planetary locales and at a variety of times. Access to specific sites can be achieved via landing at a specific location (s) or transit from a single designated landing location, but it is currently infeasible to transit long distances and through extremely rugged terrain, requiring landing close to the site of interest. The entry environment is not always guaranteed with a direct entry, and improving the entry system's robustness to a variety of environmental conditions could aid in reaching more varied landing sites."

[Dentistry in Wikipedia: A quantitative and qualitative analysis].

PubMed

Lorenz, Annette; Türp, Jens C

2010-01-01

The aim of this study was to assess the scientific quality of the 265 dental articles that were present in January 2008 in the German-language version of Wikipedia. For this purpose, the Wikipedia entries were examined for their correctness by comparing them with the current dental literature. Every article was classified as having "textbook quality", "partial textbook quality" or "missing textbook quality". Of the 261 usable articles, 28% were qualitatively comparable to a textbook, while 56% had partial textbook quality. About 16% of the articles fell into the third group. Almost half of the Wikipedia entries fulfilled the qualitative standards, whereas the remaining articles were characterized by omissions. Hence, individuals interested in dental topics should not exclusively rely on Wikipedia. For a cursory overview, however, a search in Wikipedia appears to be in order.

34 CFR 403.170 - What activities does the Secretary support under the Business-Labor-Education Partnership for...

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Providing vocational education to individuals in order to assist their entry into, or advancement in, high-technology occupations or to meet the technological need of other industries or businesses. (Authority: 20 U...

34 CFR 403.170 - What activities does the Secretary support under the Business-Labor-Education Partnership for...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Providing vocational education to individuals in order to assist their entry into, or advancement in, high-technology occupations or to meet the technological need of other industries or businesses. (Authority: 20 U...

34 CFR 403.170 - What activities does the Secretary support under the Business-Labor-Education Partnership for...

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Providing vocational education to individuals in order to assist their entry into, or advancement in, high-technology occupations or to meet the technological need of other industries or businesses. (Authority: 20 U...

34 CFR 403.170 - What activities does the Secretary support under the Business-Labor-Education Partnership for...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Providing vocational education to individuals in order to assist their entry into, or advancement in, high-technology occupations or to meet the technological need of other industries or businesses. (Authority: 20 U...

Assessing the current state of dental informatics in saudi arabia: the new frontier.

PubMed

Al-Nasser, Lubna; Al-Ehaideb, Ali; Househ, Mowafa

2014-01-01

Dental informatics is an emerging field that has the potential to transform the dental profession. This study aims to summarize the current applications of dental informatics in Saudi Arabia and to identify the challenges facing expansion of dental informatics in the Saudi context. Search for published articles and specialized forum entries was conducted, as well as interviews with dental professionals familiar with the topic. Results indicated that digital radiography/analysis and administrative management of dental practice are the commonest applications used. Applications in Saudi dental education included: web-based learning systems, computer-based assessments and virtual technology for clinical skills' teaching. Patients' education software, electronic dental/oral health records and the potential of dental research output from electronic databases are yet to be achieved in Saudi Arabia. Challenges facing Saudi dental informatics include: lack of IT infrastructure/support, social acceptability and financial cost. Several initiatives are taken towards the research in dental informatics. Still, more investments are needed to fully achieve the potential of various application of informatics in dental education, practice and research.

Arsenic and Antimony Removal from Drinking Water by Point-of-Entry Reverse Osmosis Coupled with Dual Plumbing Distribution - U.S. EPA Demonstration Project at Carmel Elementary School in Carmel, ME -Final Performance Evaluation Report

EPA Science Inventory

This report documents the activities performed for and the results obtained from the arsenic and antimony removal treatment technology demonstration project at the Carmel Elementary School (CES) in Carmel, ME. An innovative approach of employing point of entry (POE) reverse osmo...

National Audubon society's technology initiatives for bird conservation: a summary of application development for the Christmas bird count

Treesearch

Kathy Dale

2005-01-01

Since 1998, Audubon's Christmas Bird Count (CBC) has been supported by an Internet-based data entry application that was initially designed to accommodate the traditional paper-based methods of this long-running bird monitoring program. The first efforts to computerize the data and the entry procedures have informed a planned strategy to revise the current...

Exploring supervised and unsupervised methods to detect topics in biomedical text

PubMed Central

Lee, Minsuk; Wang, Weiqing; Yu, Hong

2006-01-01

Background Topic detection is a task that automatically identifies topics (e.g., "biochemistry" and "protein structure") in scientific articles based on information content. Topic detection will benefit many other natural language processing tasks including information retrieval, text summarization and question answering; and is a necessary step towards the building of an information system that provides an efficient way for biologists to seek information from an ocean of literature. Results We have explored the methods of Topic Spotting, a task of text categorization that applies the supervised machine-learning technique naïve Bayes to assign automatically a document into one or more predefined topics; and Topic Clustering, which apply unsupervised hierarchical clustering algorithms to aggregate documents into clusters such that each cluster represents a topic. We have applied our methods to detect topics of more than fifteen thousand of articles that represent over sixteen thousand entries in the Online Mendelian Inheritance in Man (OMIM) database. We have explored bag of words as the features. Additionally, we have explored semantic features; namely, the Medical Subject Headings (MeSH) that are assigned to the MEDLINE records, and the Unified Medical Language System (UMLS) semantic types that correspond to the MeSH terms, in addition to bag of words, to facilitate the tasks of topic detection. Our results indicate that incorporating the MeSH terms and the UMLS semantic types as additional features enhances the performance of topic detection and the naïve Bayes has the highest accuracy, 66.4%, for predicting the topic of an OMIM article as one of the total twenty-five topics. Conclusion Our results indicate that the supervised topic spotting methods outperformed the unsupervised topic clustering; on the other hand, the unsupervised topic clustering methods have the advantages of being robust and applicable in real world settings. PMID:16539745

Optimization of a Hot Structure Aeroshell and Nose Cap for Mars Atmospheric Entry

NASA Technical Reports Server (NTRS)

Langston, Sarah L.; Lang, Christapher G.; Samareh, Jamshid A.; Daryabeigi, Kamran

2016-01-01

The National Aeronautics and Space Administration (NASA) is preparing to send humans beyond Low Earth Orbit and eventually to the surface of Mars. As part of the Evolvable Mars Campaign, different vehicle configurations are being designed and considered for delivering large payloads to the surface of Mars. Weight and packing volume are driving factors in the vehicle design, and the thermal protection system (TPS) for planetary entry is a technology area which can offer potential weight and volume savings. The feasibility and potential benefits of a ceramic matrix composite hot structure concept for different vehicle configurations are explored in this paper, including the nose cap for a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) and an aeroshell for a mid lift-to-drag (Mid L/D) concept. The TPS of a planetary entry vehicle is a critical component required to survive the severe aerodynamic heating environment during atmospheric en- try. The current state-of-the-art is an ablative material to protect the vehicle from the heat load. The ablator is bonded to an underlying structure, which carries the mechanical loads associated with entry. The alternative hot structure design utilizes an advanced carbon-carbon material system on the outer surface of the vehicle, which is exposed to the severe heating and acts as a load carrying structure. The preliminary design using the hot structure concept and the ablative concept is determined for the spherical nose cap of the HIAD entry vehicle and the aeroshell of the Mid L/D entry vehicle. The results of the study indicate that the use of hot structures for both vehicle concepts leads to a feasible design with potential weight and volume savings benefits over current state-of-the-art TPS technology that could enable future missions.

Arcjet Testing of Woven Carbon Cloth for Use on Adaptive Deployable Entry Placement Technology

NASA Technical Reports Server (NTRS)

Arnold, James O.; laub, Bernard; Chen, Yih-Kang; Prabhu, Dinesh K.; Bittner, M. E.; Venkatapathy, Ethiraj

2013-01-01

This paper describes arcjet testing and analysis that has successfully demonstrated the viability of three dimensional woven carbon cloth for dual use in the Adaptive Deployable Entry Placement Technology (ADEPT). ADEPT is an umbrella-like entry system that is folded for stowage in the launch vehicle s shroud and deployed in space prior to reaching the atmospheric interface. A key feature of the ADEPT concept is its lower ballistic coefficient for delivery of a given payload than those for conventional, rigid body entry systems. The benefits that accrue from the lower ballistic coefficient include factor of ten reductions of deceleration forces and entry heating. The former enables consideration of new classes of scientific instruments for solar system exploration while the latter enables the design of a more efficient thermal protection system. The carbon cloth now base lined for ADEPT has a dual use in that it serves as ADEPT s thermal protection system and as the "skin" that transfers aerodynamic deceleration loads to its umbrella-like substructure. The arcjet testing described in this paper was conducted for some of the higher heating conditions for a future Venus mission using the ADEPT concept, thereby showing that the carbon cloth can perform in a relevant entry environment. The ADEPT project considered the carbon cloth to be mission enabling and was carrying it as a major risk during Fiscal Year 2012. The testing and analysis reported here played a major role in retiring that risk and is highly significant to the success and possible adoption of ADEPT for future NASA missions. Finally, this paper also describes a preliminary engineering level code, based on the arcjet data, that can be used to estimate cloth thickness for future missions using ADEPT and to predict carbon cloth performance in future arcjet tests.

Mars2020 Entry, Descent, and Landing Instrumentation (MEDLI2): Science Objectives and Instrument Requirements

NASA Technical Reports Server (NTRS)

Bose, Deepak; White, Todd; Schoenenberger, Mark; Karlgaard, Chris; Wright, Henry

2015-01-01

NASAs exploration and technology roadmaps call for capability advancements in Mars entry, descent, and landing (EDL) systems to enable increased landed mass, a higher landing precision, and a wider planetary access. It is also recognized that these ambitious EDL performance goals must be met while maintaining a low mission risk in order to pave the way for future human missions. As NASA is engaged in developing new EDL systems and technologies via testing at Earth, instrumentation of existing Mars missions is providing valuable engineering data for performance improvement, risk reduction, and an improved definition of entry loads and environment. The most notable recent example is the Mars Entry, Descent and Landing Instrument (MEDLI) suite hosted by Mars Science Laboratory for its entry in Aug 2012. The MEDLI suite provided a comprehensive dataset for Mars entry aerodynamics, aerothermodynamics and thermal protection system (TPS) performance. MEDLI data has since been used for unprecedented reconstruction of aerodynamic drag, vehicle attitude, in-situ atmospheric density, aerothermal heating, and transition to turbulence, in-depth TPS performance and TPS ablation. [1,2] In addition to validating predictive models, MEDLI data has demonstrated extra margin available in the MSL forebody TPS, which can potentially be used to reduce vehicle parasitic mass. The presentation will introduce a follow-on MEDLI instrumentation suite (called MEDLI2) that is being developed for Mars-2020 mission. MEDLI2 has an enhanced scope that includes backshell instrumentation, a wider forebody coverage, and instruments that specifically target supersonic aerodynamics. Similar to MEDLI, MEDLI2 uses thermal plugs with embedded thermocouples and ports through the TPS to measure surface pressure. MEDLI2, however, also includes heat flux sensors in the backshell and a low range pressure transducer to measure afterbody pressure.

FLPP IXV Re-entry Vehicle, Transonic Characterisation Based on FOI T1500 Wind Tunnel Tests and CFD

NASA Astrophysics Data System (ADS)

Torngren, L.; Chiarelli, C.; Mareschi, V.; Tribot, J.-P.; Binetti, P.; Walloschek, T.

2009-01-01

The European Space Agency ESA, has engaged in 2004, the IXV project (Intermediate eXperimental Vehicle) which is part of the FLPP (Future Launcher Preparatory Programme) aiming at answering to critical technological issues, while supporting the future generation launchers and to improve in general European capabilities in the strategic field of atmospheric re-entry for space transportation, exploration and scientific applications. The IXV key mission and system objectives are the design, development, manufacturing, assembling and on-ground to in-flight verification of an autonomous European lifting and aerodynamically controlled re-entry system, integrating the critical re-entry technologies at the system level. The current IXV vehicle is a slender body type exhibiting rounded shape, thick body controlled by means of two control surfaces. The current mission is to perform an atmospheric re- entry ended by a safe recovery in supersonic regime. A potential extension of the flight domain down to the transonic regime was proposed to be analyzed. The objectives were to study the capability of the IXV for flying autonomously enabling a recovery of the vehicle by means of a subsonic parachute based DRS. The vehicle designed for the hypersonic speeds integrating a large base with only two control surfaces located close to the plane of symmetry is definitively not tuned for transonic ones. CFD done by Thales Alenia Space and wind tunnel activities involving FOI T1500 facility contributed to built up an Aerodynamic Data Base (AEDB) to be used as inputs for flying qualities analysis and re-entry simulations. The paper presents the main objectives of the transonic activities with emphasis on CFD and WTT including a description of the different prediction tools and discussing the main outcomes of the current data comparisons.

Viability of 3 D Woven Carbon Cloth and Advanced Carbon-Carbon Ribs for Adaptive Deployable Entry Placement Technology (ADEPT) for Future NASA Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Arnold, James O.; Peterson, K. H.; Blosser, M. L.

2013-01-01

This paper describes aerothermodynamic and thermal structural testing that demonstrate the viability of three dimensional woven carbon cloth and advanced carbon-carbon (ACC) ribs for use in the Adaptive Deployable Entry Placement Technology (ADEPT). ADEPT is an umbrella-like entry system that is folded for stowage in the launch vehicle's shroud and deployed prior to reaching the atmeopheric interface. A key feature of the ADEPT concept is a lower ballistic coefficient for delivery of a given payload than seen with conventional, rigid body entry systems. The benefits that accrue from the lower ballistic coefficient incllude factor-of-ten reductions of deceleration forces and entry heating. The former enables consideration of new classes of scientific instruments for solar system exploration while the latter enables the design of a more efficient thermal protection system. The carbon cloth base lined for ADEPT has a dual use in that it serves as the thermal protection system and as the "skin" that transfers aerdynamic deceleration loads to its umbrella-like substructure. Arcjet testing described in this paper was conducted for some of the higher heating conditions for a future Venus mission using the ADEPT concept, thereby showing that the carbon cloth can perform in a relevant entry environment. Recently completed the thermal structural testing of the cloth attached to a representative ACC rib design is also described. Finally, this paper describes a preliminary engineering level code, based on the arcjet data, that can be used to estimate cloth thickness for future ADEPT missions and to predict carbon cloth performance in future arcjet tests.

Evaluation of heterotrophic plate and chromogenic agar colony counting in water quality laboratories.

PubMed

Hallas, Gary; Monis, Paul

2015-01-01

The enumeration of bacteria using plate-based counts is a core technique used by food and water microbiology testing laboratories. However, manual counting of bacterial colonies is both time and labour intensive, can vary between operators and also requires manual entry of results into laboratory information management systems, which can be a source of data entry error. An alternative is to use automated digital colony counters, but there is a lack of peer-reviewed validation data to allow incorporation into standards. We compared the performance of digital counting technology (ProtoCOL3) against manual counting using criteria defined in internationally recognized standard methods. Digital colony counting provided a robust, standardized system suitable for adoption in a commercial testing environment. The digital technology has several advantages:•Improved measurement of uncertainty by using a standard and consistent counting methodology with less operator error.•Efficiency for labour and time (reduced cost).•Elimination of manual entry of data onto LIMS.•Faster result reporting to customers.

Regenerative Aerobraking

NASA Technical Reports Server (NTRS)

Moses, Robert W.

2004-01-01

NASA's exploration goals for Mars and Beyond will require new power systems and in situ resource utilization technologies. Regenerative aerobraking may offer a revolutionary approach for in situ power generation and oxygen harvesting during these exploration missions. In theory, power and oxygen can be collected during aerobraking and stored for later use in orbit or on the planet. This technology would capture energy and oxygen from the plasma field that occurs naturally during hypersonic entry using well understood principles of magnetohydrodynamics and oxygen filtration. This innovative approach generates resources upon arrival at the operational site, and thus greatly differs from the traditional approach of taking everything you need with you from Earth. Fundamental analysis, computational fluid dynamics, and some testing of experimental hardware have established the basic feasibility of generating power during a Mars entry. Oxygen filtration at conditions consistent with spacecraft entry parameters at Mars has been studied to a lesser extent. Other uses of the MHD power are presented. This paper illustrates how some features of regenerative aerobraking may be applied to support human and robotic missions at Mars.

A Study to Determine the Basic Science and Mathematics Topics Most Needed by Engineering Technology Graduates of Wake Technical Institute in Performing Job Duties.

ERIC Educational Resources Information Center

Edwards, Timothy I.; Roberson, Clarence E., Jr.

A survey of 470 graduates of the six engineering technology programs at Wake Technical Institute--Architectural, Chemical, Civil Engineering, Computer, Electronic Engineering, and Industrial Engineering Technologies--and 227 of their employers was conducted in October, 1979, to determine the science and mathematics topics most needed by…

The role of digital data entry in participatory environmental monitoring.

PubMed

Brammer, Jeremy R; Brunet, Nicolas D; Burton, A Cole; Cuerrier, Alain; Danielsen, Finn; Dewan, Kanwaljeet; Herrmann, Thora Martina; Jackson, Micha V; Kennett, Rod; Larocque, Guillaume; Mulrennan, Monica; Pratihast, Arun Kumar; Saint-Arnaud, Marie; Scott, Colin; Humphries, Murray M

2016-12-01

Many argue that monitoring conducted exclusively by scientists is insufficient to address ongoing environmental challenges. One solution entails the use of mobile digital devices in participatory monitoring (PM) programs. But how digital data entry affects programs with varying levels of stakeholder participation, from nonscientists collecting field data to nonscientists administering every step of a monitoring program, remains unclear. We reviewed the successes, in terms of management interventions and sustainability, of 107 monitoring programs described in the literature (hereafter programs) and compared these with case studies from our PM experiences in Australia, Canada, Ethiopia, Ghana, Greenland, and Vietnam (hereafter cases). Our literature review showed that participatory programs were less likely to use digital devices, and 2 of our 3 more participatory cases were also slow to adopt digital data entry. Programs that were participatory and used digital devices were more likely to report management actions, which was consistent with cases in Ethiopia, Greenland, and Australia. Programs engaging volunteers were more frequently reported as ongoing, but those involving digital data entry were less often sustained when data collectors were volunteers. For the Vietnamese and Canadian cases, sustainability was undermined by a mismatch in stakeholder objectives. In the Ghanaian case, complex field protocols diminished monitoring sustainability. Innovative technologies attract interest, but the foundation of effective participatory adaptive monitoring depends more on collaboratively defined questions, objectives, conceptual models, and monitoring approaches. When this foundation is built through effective partnerships, digital data entry can enable the collection of more data of higher quality. Without this foundation, or when implemented ineffectively or unnecessarily, digital data entry can be an additional expense that distracts from core monitoring objectives and undermines project sustainability. The appropriate role of digital data entry in PM likely depends more on the context in which it is used and less on the technology itself. © 2016 Society for Conservation Biology.

Phosphatidylinositol 4-Kinase IIIβ Is Required for Severe Acute Respiratory Syndrome Coronavirus Spike-mediated Cell Entry*

PubMed Central

Yang, Ning; Ma, Ping; Lang, Jianshe; Zhang, Yanli; Deng, Jiejie; Ju, Xiangwu; Zhang, Gongyi; Jiang, Chengyu

2012-01-01

Phosphatidylinositol kinases (PI kinases) play an important role in the life cycle of several viruses after infection. Using gene knockdown technology, we demonstrate that phosphatidylinositol 4-kinase IIIβ (PI4KB) is required for cellular entry by pseudoviruses bearing the severe acute respiratory syndrome-coronavirus (SARS-CoV) spike protein and that the cell entry mediated by SARS-CoV spike protein is strongly inhibited by knockdown of PI4KB. Consistent with this observation, pharmacological inhibitors of PI4KB blocked entry of SARS pseudovirions. Further research suggested that PI4P plays an essential role in SARS-CoV spike-mediated entry, which is regulated by the PI4P lipid microenvironment. We further demonstrate that PI4KB does not affect virus entry at the SARS-CoV S-ACE2 binding interface or at the stage of virus internalization but rather at or before virus fusion. Taken together, these results indicate a new function for PI4KB and suggest a new drug target for preventing SARS-CoV infection. PMID:22253445

Information Processing Technology. Final Report.

ERIC Educational Resources Information Center

Choate, Larry; And Others

A tech prep/associate degree program in information technology was developed to prepare workers for entry into and advancement in occupations entailing applications of scientific principles and higher mathematics in situations involving various office machines. According to the articulation agreement reached, students from five country regional…

Electron Technology - ELTE 2013

NASA Astrophysics Data System (ADS)

Szczepański, Paweł; Kisiel, Ryszard; Romaniuk, Ryszard S.

2013-07-01

The paper presents a digest of chosen research and technical work results shown by researchers from technical universities, governmental institutes and research firms during the XIth Scientific Conference on Electron Technology ELTE 2013. ELTE Conference has been held every three years since more than three decades. The ELTE 2013 conference was held in Ryn Castle (Poland) on 16-20 April 2013 and gathered around 270 scientists, theoreticians, technologists and engineers from such areas as material engineering, chemistry, sensors, integrated circuits, electronics engineering, laser industry, photonics, etc. The conference featured the following major four topical sessions - Micro and Nano, Photonics, Materials and Technologies, and Microsystems; two dedicated sessions - a keynote plenary session on hot topics in electron technology, as well as a session on large research projects and grants realized by the relevant community. Oral topical sessions were accompanied by poster sessions. The paper is a succinct topical introduction to the volume of ELTE 2013 proceedings. Over 100 papers, gathered in the volume, present a very relevant cross section and state-of-the-art of this branch of science and technology in Poland with involved international co-operation.

Insights on Technology Innovation - A Review of the U.S. Department of Energy Solar Decathlon Competition Entries 2002-2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simon, Joseph J; Doris, Elizabeth S; Farrar, Sara L

The U.S. Department of Energy (DOE) Solar Decathlon is a collegiate competition that challenges student teams to design and build full-size, solar-powered houses. Because of balanced design priorities of architecture, engineering, innovation, performance, and energy use, teams have focused on a range of technologies in the built environment, from wall materials to home control systems, from electric lighting to HVAC equipment, and from geothermal to solar photovoltaic technology. This report provides insights into building technology innovation from a review of the Solar Decathlon competition entry designs, anecdotal experiences, and related market reports. The report describes example case studies of themore » evolution of technology solutions over time to illustrate the innovative, market-driving nature of the Solar Decathlon. It charts technologies utilized in the team designs over seven competitions and compares those to broader market adoption. It is meant to illustrate the technology innovation aspects of the competition, not to be a comprehensive or quantitative analysis. Solar Decathlon also has impacts on public perception of innovative technologies as well as workforce development through the thousands of participating students. The focus of these case studies is to showcase how it contributes to marketplace adoption of innovative energy technologies.« less

U.S. Science and Technology--Its Impact on Trade and Industry Training.

ERIC Educational Resources Information Center

Pelletier, Alfred W.

Vocational education must train students in a way that capitalizes on their potential while preparing them with the skills needed for the jobs being created through advances in science and technology. The impact of technological change has been to challenge education to ease the transition of displaced workers and to accommodate entries.…

3 CFR 13606 - Executive Order 13606 of April 22, 2012. Blocking the Property and Suspending Entry Into the...

Code of Federal Regulations, 2013 CFR

2013-01-01

... Human Rights Abuses by the Governments of Iran and Syria via Information Technology 13606 Order 13606... Abuses by the Governments of Iran and Syria via Information Technology By the authority vested in me as... the operation of, information and communications technology that facilitates computer or network...

34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the... or industry, to provide high quality training for skilled workers and technicians in high technology...

34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

Code of Federal Regulations, 2014 CFR

2014-07-01

... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the... or industry, to provide high quality training for skilled workers and technicians in high technology...

34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

Code of Federal Regulations, 2012 CFR

2012-07-01

... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the... or industry, to provide high quality training for skilled workers and technicians in high technology...

34 CFR 403.172 - What special considerations must the State board give in approving projects, services, and...

Code of Federal Regulations, 2013 CFR

2013-07-01

... years of age in order to assist their entry into, or advancement in, high-technology occupations or to... EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAM What Kinds of Activities Does the... or industry, to provide high quality training for skilled workers and technicians in high technology...

Retrospective Analysis of Technological Literacy of K-12 Students in the USA

ERIC Educational Resources Information Center

Eisenkraft, Arthur

2010-01-01

Assessing technological literacy in the USA will require a large expenditure of resources. While these important initiatives are taking place, it is useful to analyze existing archival data to get a sense of students' understanding of technology. Such archival data exists from the entries submitted to the Toshiba/NSTA ExploraVisions competition…

Intermediate Experimental Vehicle, ESA Program IXV ATDB Tool and Aerothermodynamic Characterization

NASA Astrophysics Data System (ADS)

Mareschi, Vincenzo; Ferrarella, Daniela; Zaccagnino, Elio; Tribot, Jean-Pierre; Vallee, Jean-Jacques; Haya-Ramos, Rodrigo; Rufolo, Giuseppe; Mancuso, Salvatore

2011-05-01

In the complex domain of the space technologies and among the different applications available in Europe, a great interest has been placed since several years in the development of re-entry technologies. Among the different achievements obtained in that field it is to be recalled the experience of the Atmospheric Re-entry Vehicle flight in 1998 and a certain number of important investments per-formed at Agency and national levels like Hermes, MSTP, Festip, X-38, FLPP, TRP, GSTP, HSTS, AREV, Pre-X. IXV (Intermediate eXperimental V ehicle) builds on these past experiences and studies and it is conceived to be the next technological step forward with respect to ARD With respect to previous European ballistic or quasi- ballistic demonstrators, IXV will have an increased in- flight manoeuvrability and the planned mission will allow verifying the performances of the required technologies against a wider re-entry corridor. This will imply from the pure technological aspect to increase the level of engagement on critical technologies and disciplines like aerodynamics/aerothermodynamics, guidance, navigation, control, thermal protection materials and in flight measurements. In order to support the TPS design and the other sub- systems, an AeroThermodynamicDataBase Tool has been developed by Dassault Aviation and integrated by Thales Alenia Space with the Functional Engineering Simulator (used for GNC performances evaluation) in order to characterize the aerothermodynamic behaviour of the vehicle. This paper will describe: - The methodology used to develop the ATDB tool, based on the processing of CFD computations and WTT campaigns results. - The utilization of the ATDB tool, by means of its integration into the System process. - The methodology used for the aerothermal characterization of IXV.

Linking medical records to an expert system

NASA Technical Reports Server (NTRS)

Naeymi-Rad, Frank; Trace, David; Desouzaalmeida, Fabio

1991-01-01

This presentation will be done using the IMR-Entry (Intelligent Medical Record Entry) system. IMR-Entry is a software program developed as a front-end to our diagnostic consultant software MEDAS (Medical Emergency Decision Assistance System). MEDAS (the Medical Emergency Diagnostic Assistance System) is a diagnostic consultant system using a multimembership Bayesian design for its inference engine and relational database technology for its knowledge base maintenance. Research on MEDAS began at the University of Southern California and the Institute of Critical Care in the mid 1970's with support from NASA and NSF. The MEDAS project moved to Chicago in 1982; its current progress is due to collaboration between Illinois Institute of Technology, The Chicago Medical School, Lake Forest College and NASA at KSC. Since the purpose of an expert system is to derive a hypothesis, its communication vocabulary is limited to features used by its knowledge base. The development of a comprehensive problem based medical record entry system which could handshake with an expert system while creating an electronic medical record at the same time was studied. IMR-E is a computer based patient record that serves as a front end to the expert system MEDAS. IMR-E is a graphically oriented comprehensive medical record. The programs major components are demonstrated.

Advanced Ablative TPS

NASA Technical Reports Server (NTRS)

Gasch, Matthew J.

2011-01-01

Early NASA missions (Gemini, Apollo, Mars Viking) employed new ablative TPS that were tailored for the entry environment. After 40 years, heritage ablative TPS materials using Viking or Pathfinder era materials are at or near their performance limits and will be inadequate for future exploration missions. Significant advances in TPS materials technology are needed in order to enable any subsequent human exploration missions beyond Low Earth Orbit. This poster summarizes some recent progress at NASA in developing families of advanced rigid/conformable and flexible ablators that could potentially be used for thermal protection in planetary entry missions. In particular the effort focuses technologies required to land heavy (approx.40 metric ton) masses on Mars to facilitate future exploration plans.

Entry, Descent, and Landing for Human Mars Missions

NASA Technical Reports Server (NTRS)

Munk, Michelle M.; DwyerCianciolo, Alicia M.

2012-01-01

One of the most challenging aspects of a human mission to Mars is landing safely on the Martian surface. Mars has such low atmospheric density that decelerating large masses (tens of metric tons) requires methods that have not yet been demonstrated, and are not yet planned in future Mars missions. To identify the most promising options for Mars entry, descent, and landing, and to plan development of the needed technologies, NASA's Human Architecture Team (HAT) has refined candidate methods for emplacing needed elements of the human Mars exploration architecture (such as ascent vehicles and habitats) on the Mars surface. This paper explains the detailed, optimized simulations that have been developed to define the mass needed at Mars arrival to accomplish the entry, descent, and landing functions. Based on previous work, technology options for hypersonic deceleration include rigid, mid-L/D (lift-to-drag ratio) aeroshells, and inflatable aerodynamic decelerators (IADs). The hypersonic IADs, or HIADs, are about 20% less massive than the rigid vehicles, but both have their technology development challenges. For the supersonic regime, supersonic retropropulsion (SRP) is an attractive option, since a propulsive stage must be carried for terminal descent and can be ignited at higher speeds. The use of SRP eliminates the need for an additional deceleration system, but SRP is at a low Technology Readiness Level (TRL) in that the interacting plumes are not well-characterized, and their effect on vehicle stability has not been studied, to date. These architecture-level assessments have been used to define the key performance parameters and a technology development strategy for achieving the challenging mission of landing large payloads on Mars.

Technology support of the handover: promoting observability, flexibility and efficiency.

PubMed

Patterson, Emily S

2012-12-01

Efforts to standardise data elements and increase the comprehensiveness of information included in patient handovers have produced a growing interest in augmenting the verbal exchange of information with written communications conducted through health information technology (HIT). The aim of this perspective is to offer recommendations to optimise technology support of handovers, based on a review of the relevant scientific literature. Review of the literature on human factors and the study of communication produced three recommendations. The first entails making available "shared knowledge" relevant to the handover and subsequent clinical management with intended and unintended recipients. The second is to create a flexible narrative structure (unstructured text fields) for human-human communications facilitated by technology. The third recommendation is to avoid reliance on real-time data entry during busy periods. Implementing these recommendations is anticipated to increase the observability (the ability to readily determine current status), flexibility, and efficiency of HIT-supported patient handovers. Anticipated benefits of technology-supported handovers include reducing reliance on human memory, increasing the efficiency and structure of the verbal exchange, avoiding readbacks of numeric data, and aiding clinical management following the handover. In cases when verbal handovers are delayed, do not occur, or involve members of the health care team without first-hand access to critical information, making 'common ground' observable for all recipients, creating a flexible narrative structure for communication and avoiding reliance on real-time data entry during the busiest times has implications for HIT design and day to day data entry and management operations. Benefits include increased observability, flexibility, and efficiency of HIT-supported patient handovers.

Atmospheric entry probes for outer planet exploration. Outer planet entry probe technical summary

NASA Technical Reports Server (NTRS)

1974-01-01

The use of unmanned space probes for investigating the conditions existing on and around the outer planets of the solar system is discussed. The subjects included in the report are: (1) the design of a common entry probe for outer planet missions, (2) the significant trades related to the development of a common probe design, (3) the impact of bus selection on probe design, (4) the impact of probe requirements on bus modifications, and (5) the key technology elements recommended for advanced development. Drawings and illustrations of typical probes are included to show the components and systems used in the space probes.

Entry, Descent and Landing Systems Analysis Study: Phase 1 Report

NASA Technical Reports Server (NTRS)

DwyerCianciolo, Alicia M.; Davis, Jody L.; Komar, David R.; Munk, Michelle M.; Samareh, Jamshid A.; Powell, Richard W.; Shidner, Jeremy D.; Stanley, Douglas O.; Wilhite, Alan W.; Kinney, David J.;

Heat-shield for Extreme Entry Environment Technology (HEEET) Development Status

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Ellerby, Don; Gage, Peter

2016-01-01

The Heat shield for Extreme Entry Environment Technology (HEEET) Project is a NASA STMD and SMD co-funded effort. The goal is to develop and mission infuse a new ablative Thermal Protection System that can withstand extreme entry. It is targeted to support NASA's high priority missions, as defined in the latest decadal survey, to destinations such as Venus and Saturn in-situ robotic science missions. Entry into these planetary atmospheres results in extreme heating. The entry peak heat-flux and associated pressure are estimated to be between one and two orders of magnitude higher than those experienced by Mars Science Laboratory or Lunar return missions. In the recent New Frontiers community announcement NASA has indicated that it is considering providing an increase to the PI managed mission cost (PIMMC) for investigations utilizing the Heat Shield for Extreme Entry Environment Technology (HEEET) and in addition, NASA is considering limiting the risk assessment to only their accommodation on the spacecraft and the mission environment. The HEEET ablative TPS utilizes 3D weaving technology to manufacture a dual layer material architecture. The 3-D weaving allows for flat panels to be woven. The dual layer consists of a top layer designed to withstand the extreme external environment while the inner or insulating layer by design, is designed to achieve low thermal conductivity, and it keeps the heat from conducting towards the structure underneath. Both arc jet testing combined with material properties have been used to develop thermal response models that allows for comparison of performance with heritage carbon phenolic. A 50% mass efficiency is achieved by the dual layer construct compared to carbon phenolic for a broad range of missions both to Saturn and Venus. The 3-D woven flat preforms are molded to achieve the shape as they are compliant and then resin infusion with curing forms a rigid panels. These panels are then bonded on to the aeroshell structure. Gaps exist between the panels and these gaps have to be filled with seams. The seam material then has to be bonded on to adjacent panels and also to the structure. The heat-shield assembly is shown in Figure 1. One of the significant challenges we have overcome recently is the design, development and testing of the seam. HEEET material development and the seam concept development have utilized some of the unique test capabilities available in the US. The various test facilities utilized in thermal testing along with the entry environment for Saturn and Venus missions are shown in Figure 2. The HEEET project is currently in it's 3rd year of a four-year development. Figure 3 illustrates the key accomplishments to-date and the challenges yet to be overcome before the technology is ready for mission infusion. This proposed presentation will cover both progress that has been made in the HEEET project and also the challenges to be overcome that is highlighted in Figure 3. Objective of the HEEET project is to mature the system in time to support the next New Frontiers opportunity and we believe we are well along the way to mission infuse HEEET.

Heatshield for Extreme Entry Environment Technology (HEEET) Development Status

NASA Technical Reports Server (NTRS)

Ellerby, Don; Gage, Peter; Kazemba, Cole; Mahzari, Milad; Nishioka, Owen; Peterson, Keith; Stackpoole, Mairead; Venkatapathy, Ethiraj; Young, Zion; Poteet, Carl;

A Study of Technology Programs: College-Level.

ERIC Educational Resources Information Center

Rochester State Junior Coll., Minn.

Several current technology programs are evaluated and, where appropriate, changes recommended. Jobs at both entry and subsequent promotion levels are described, and manpower needs surveyed. Ordinarily, it is only after discussion with prospective employers (industrial, clinical, medical) that curriculums are adopted and costs estimated for…

Electricity/Electronics. Career Education Guide.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC. European Area.

The curriculum guide is designed to provide high school students with realistic training in electricity/electronics theory and practice and to prepare them for entry into an occupation or continuing postsecondary education. The learning modules are grouped into three areas: electrical technology, radio-television technology, and industrial…

Reflexive journaling on emotional research topics: ethical issues for team researchers.

PubMed

Malacrida, Claudia

2007-12-01

Traditional epistemological concerns in qualitative research focus on the effects of researchers' values and emotions on choices of research topics, power relations with research participants, and the influence of researcher standpoints on data collection and analysis. However, the research process also affects the researchers' values, emotions, and standpoints. Drawing on reflexive journal entries of assistant researchers involved in emotionally demanding team research, this article explores issues of emotional fallout for research team members, the implications of hierarchical power imbalances on research teams, and the importance of providing ethical opportunities for reflexive writing about the challenges of doing emotional research. Such reflexive approaches ensure the emotional safety of research team members and foster opportunities for emancipatory consciousness among research team members.

Woven Thermal Protection System (WTPS) a Novel Approach to Meet NASA's Most Demanding Reentry Missions

NASA Technical Reports Server (NTRS)

Stackpoole, Mairead

2014-01-01

NASA's future robotic missions to Venus and outer planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of current mid-density ablators (PICA or Avcoat). Therefore mission planners assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic (CP) is a robust Thermal Protection System (TPS) however its high density and thermal conductivity constrain mission planners to steep entries, high heat fluxes, pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose certification challenges in existing ground based test facilities. In 2012 the Game Changing Development Program in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASA's most challenging entry missions. This presentation will summarize maturation of the WTPS project.

Human Mars EDL Pathfinder Study: Assessment of Technology Development Gaps and Mitigations

NASA Technical Reports Server (NTRS)

Lillard, Randolph; Olejniczak, Joe; Polsgrove, Tara; Cianciolo, Alice Dwyer; Munk, Michelle; Whetsel, Charles; Drake, Bret

2017-01-01

This paper presents the results of a NASA initiated Agency-wide assessment to better characterize the risks and potential mitigation approaches associated with landing human class Entry, Descent, and Landing (EDL) systems on Mars. Due to the criticality and long-lead nature of advancing EDL techniques, it is necessary to determine an appropriate strategy to improve the capability to land large payloads. A key focus of this study was to understand the key EDL risks and with a focus on determining what "must" be tested at Mars. This process identified the various risks and potential risk mitigation strategies along with the key near term technology development efforts required and in what environment those technology demonstrations were best suited. The study identified key risks along with advantages to each entry technology. In addition, it was identified that provided the EDL concept of operations (con ops) minimized large scale transition events, there was no technology requirement for a Mars pre-cursor demonstration. Instead, NASA should take a direct path to a human-scale lander.

Space Transportation Materials and Structures Technology Workshop. Volume 2; Proceedings

NASA Technical Reports Server (NTRS)

Cazier, Frank W., Jr. (Compiler); Gardner, James E. (Compiler)

1993-01-01

The Space Transportation Materials and Structures Technology Workshop was held on September 23-26, 1991, in Newport News, Virginia. The workshop, sponsored by the NASA Office of Space Flight and the NASA Office of Aeronautics and Space Technology, was held to provide a forum for communication within the space materials and structures technology developer and user communities. Workshop participants were organized into a Vehicle Technology Requirements session and three working panels: Materials and Structures Technologies for Vehicle Systems, Propulsion Systems, and Entry Systems.

The Design Process of Physical Security as Applied to a U.S. Border Port of Entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, G.G.

1999-02-22

This paper details the application of a standard physical security system design process to a US Border Port of Entry (PoE) for vehicle entry/exit. The physical security design methodology is described as well as the physical security similarities to facilities currently at a US Border PoE for vehicles. The physical security design process description includes the various elements that make up the methodologies well as the considerations that must be taken into account when dealing with system integration of those elements. The distinctions between preventing unlawful entry/exit of illegal contraband and personnel are described. The potential to enhance the functionsmore » of drug/contraband detection in the Pre-Primary Inspection area through the application of emerging technologies are also addressed.« less

The CIPM list of recommended frequency standard values: guidelines and procedures

NASA Astrophysics Data System (ADS)

Riehle, Fritz; Gill, Patrick; Arias, Felicitas; Robertsson, Lennart

2018-04-01

A list of standard reference frequency values (LoF) of quantum transitions from the microwave to the optical regime has been recommended by the International Committee for Weights and Measures (Comité international des poids et mesures, CIPM) for use in basic research, technology, and for the metrology of time, frequency and length. The CIPM LoF contains entries that are recommended as secondary representations of the second in the International System of Units, and entries that can be used to serve as realizations of the definition of the metre. The historical perspective that led to the CIPM LoF is outlined. Procedures have been developed for updating existing, and validating new, entries into the CIPM LoF. The CIPM LoF might serve as an entry for a future redefinition of the second by an optical transition.

A thought in the park: The influence of naturalness and low-level visual features on expressed thoughts.

PubMed

Schertz, Kathryn E; Sachdeva, Sonya; Kardan, Omid; Kotabe, Hiroki P; Wolf, Kathleen L; Berman, Marc G

2018-05-01

Prior research has shown that the physical characteristics of one's environment have wide ranging effects on affect and cognition. Other research has demonstrated that one's thoughts have impacts on mood and behavior, and in this three-part research program we investigated how physical features of the environment can alter thought content. In one study, we analyzed thousands of journal entries written by park visitors to examine how low-level and semantic visual features of the parks correlate with different thought topics. In a second study, we validated our ecological results by conducting an online study where participants were asked to write journal entries while imagining they were visiting a park, to ensure that results from Study 1 were not due to selection bias of park visitors. In the third study, we experimentally manipulated exposure to specific visual features to determine if they induced thinking about the same thought topics under more generalized conditions. Results from Study 3 demonstrated a potential causal role for perceived naturalness and high non-straight edges on thinking about "Nature", with a significant positive interaction. Results also showed a potential causal effect of naturalness and non-straight edges on thinking about topics related to "Spiritual & Life Journey", with perceived naturalness having a negative relationship and non-straight edges having a positive relationship. We also observed a significant positive interaction between non-straight edge density and naturalness in relation to "Spiritual & Life Journey". These results have implications for the design of the built environment to influence human reflection and well-being. Copyright © 2018 Elsevier B.V. All rights reserved.

Using Technology to Learn from Travelmates' Adventures.

ERIC Educational Resources Information Center

Braun, Joseph A., Jr.; Kraft, Christine

1995-01-01

Describes a thematic curriculum unit in which elementary students simulate travel around the world and record their experiences using word processors and databases. Includes figures listing student directions and an actual student journal entry. Asserts that technology can heighten student motivation and improve knowledge about the world. (CFR)

The Future of Access Technology for Blind and Visually Impaired People.

ERIC Educational Resources Information Center

Schreier, E. M.

1990-01-01

This article describes potential use of new technological products and services by blind/visually impaired people. Items discussed include computer input devices, public telephones, automatic teller machines, airline and rail arrival/departure displays, ticketing machines, information retrieval systems, order-entry terminals, optical character…

Cassini Huygens entry and descent technologies

NASA Astrophysics Data System (ADS)

Scoon, G.; Whitcomb, G.; Eiden, M.; Smith, A.

1989-10-01

An overview of the Huygens Titan Atmosphere Probe of the Cassini mission is presented. The requirements of the various Probe systems are described and a synthesis is given of the relevant technology studies and development. The application of these studies to the Probe system design is briefly pointed out.

Health Technologies State Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This "tech prep" state competency profile contains all the competencies required and recommended for entry-level employees in occupations in the health technologies cluster. Introductory materials include the following: descriptions of the different types of competencies (essential ones that must be included in all new tech prep programs…

Defense Small Business Innovation Research Program (SBIR). Volume 2. Navy Abstracts of Phase 1 Awards 1992

DTIC Science & Technology

1992-01-01

The results of these studies will be used to identify the most promising strategies for minimizing or eliminating the sources of damage. MUDAWAR ...NAVY Topic#: 92-097 DARPA Topic#: 92-145 NOVA MANAGFMENT, INC. MUDAWAR THERMAL SYSTEM, INC. ARMY Topic#: 92-087 NAVY Topic#: 92-136 ARMY Topic#: 92-089...TECHNOLOGIES, INC. MUDAWAR THERMAL SYSTEM. INC. NAVY Topic#: 92-120 NAVY Topic#: 92-137 FOSTER-MILLER, INC. MOUNTAIN OPTECH, INC. MSNW, INC. NAVY Topic#: 92-138

Defense Small Business Innovation Research Program (SBIR). Volume 2. Navy Abstracts of Phase 1 Awards 1993

DTIC Science & Technology

1993-01-01

and toughness and strength will be evaluated by pressurized ring tensile tests. MUDAWAR THERMAL SYSTEM, INC. Topic#: 92-136 ID#: 92N40-240 1217...ARMY Topic#: 92-056 MTL SYSTEMS, INC. AF TopicS: 93-051 MIMS TECHNOLOGY DEVELOPMENT COMPANY AF Topic#: 93-111 AF Topic#: 93-011 MUDAWAR THERMAL SYSTEM...156 MUDAWAR THERMAL SYSTEM, INC. ANALYTICAL SERVICES & MATERIALS, INC. NAVY Topic#: 92-137 NAVY Topic#: 92-157 MOUNTAIN OPTECH, INC. DATAMAT SYSTEMS

Inventory of Innovative Learning Materials in Marine Science and Technology. UNESCO Reports in Marine Science 60.

ERIC Educational Resources Information Center

Richards, Adrian F.; Richards, Efrosine A.

The Inventory of Innovative Learning Materials in Marine Science and Technology includes 32 computer-, 148 video-, 16 film-, and 11 CD-ROM-based entries. They concern materials in biosciences (67), chemistry (5), geosciences (16), physics (23), technology (76) and other (20). This first, initial compilations is conceived as the basis for more…

An Analysis of Industrial Technology Curriculum and Its Significance to the Casting Industry.

ERIC Educational Resources Information Center

Hauser, Roger Emmett

The purpose of this study was to determine to what extent industrial technology programs are training technologists in light of the needs of the casting industry. To determine the type of curriculum needed to prepare individuals for entry into the casting industry, and to study industrial technology programs as they relate to metal casting,…

Refugee Status Required for Resettlement in the United States

DTIC Science & Technology

2017-06-09

predominant topic in the United States (US) today . There are more refugees in need of humanitarian assistance than at any other time in history. The US...the criteria from the Cuban- Haitian migration that is applicable or no longer applicable today , with criteria applicable today for the approval of...status today . US refugee laws mandate the procedures for Customs and Immigrations on the criteria for refugee status and entry into the US

Blogs: A New Frontier for School Discipline Issues. A Legal Memorandum: Quarterly Law Topics for School Leaders. Vol. 7, No. 1, Fall 2006

ERIC Educational Resources Information Center

Kirby, Elizabeth; Kallio, Brenda

2006-01-01

Blogging is a widely used means of communication for millions of Internet users around the world. Blogs, which are Web sites or Weblogs where entries may be posted on a regular basis, frequently serve as online diaries or commentaries and may include text, images, and links to other sources. Diaries are no longer kept under lock and key. Today's…

BibMic: A bibliography of books relating to materials microscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mannheimer, W.A.

The author has not ceased to wonder at the evolution of the literature on this subject; the present edition has grown to 975 entries, which bears testimony to the very dynamic continuing growth of microscopy and materiallography. Inspection of newly added keywords also shows the direction of this evolution; in particular, topics related to the many exciting new scanning microscopies, and all computer-based techniques are the main avenues of present research.

Using speech recognition to enhance the Tongue Drive System functionality in computer access.

PubMed

Huo, Xueliang; Ghovanloo, Maysam

2011-01-01

Tongue Drive System (TDS) is a wireless tongue operated assistive technology (AT), which can enable people with severe physical disabilities to access computers and drive powered wheelchairs using their volitional tongue movements. TDS offers six discrete commands, simultaneously available to the users, for pointing and typing as a substitute for mouse and keyboard in computer access, respectively. To enhance the TDS performance in typing, we have added a microphone, an audio codec, and a wireless audio link to its readily available 3-axial magnetic sensor array, and combined it with a commercially available speech recognition software, the Dragon Naturally Speaking, which is regarded as one of the most efficient ways for text entry. Our preliminary evaluations indicate that the combined TDS and speech recognition technologies can provide end users with significantly higher performance than using each technology alone, particularly in completing tasks that require both pointing and text entry, such as web surfing.

Technology transfer methodology

NASA Technical Reports Server (NTRS)

Labotz, Rich

1991-01-01

Information on technology transfer methodology is given in viewgraph form. Topics covered include problems in economics, technology drivers, inhibitors to using improved technology in development, technology application opportunities, and co-sponsorship of technology.

Using Android and Open Data Kit Technology in Data Management for Research in Resource-Limited Settings in the Niger Delta Region of Nigeria: Cross-Sectional Household Survey.

PubMed

Maduka, Omosivie; Akpan, Godwin; Maleghemi, Sylvester

2017-11-30

Data collection in Sub-Saharan Africa has traditionally been paper-based. However, the popularization of Android mobile devices and data capture software has brought paperless data management within reach. We used Open Data Kit (ODK) technology on Android mobile devices during a household survey in the Niger Delta region of Nigeria. The aim of this study was to describe the pros and cons of deploying ODK for data management. A descriptive cross-sectional household survey was carried out by 6 data collectors between April and May 2016. Data were obtained from 1706 persons in 601 households across 6 communities in 3 states in the Niger Delta. The use of Android mobile devices and ODK technology involved form building, testing, collection, aggregation, and download for data analysis. The median duration for data collection per household and per individual was 25.7 and 9.3 min, respectively. Data entries per device ranged from 33 (33/1706, 1.93%) to 482 (482/1706, 28.25%) individuals between 9 (9/601, 1.5%) and 122 (122/601, 20.3%) households. The most entries (470) were made by data collector 5. Only 2 respondents had data entry errors (2/1706, 0.12%). However, 73 (73/601, 12.1%) households had inaccurate date and time entries for when data collection started and ended. The cost of deploying ODK was estimated at US $206.7 in comparison with the estimated cost of US $466.7 for paper-based data management. We found the use of mobile data capture technology to be efficient and cost-effective. As Internet services improve in Africa, we advocate their use as effective tools for health information management. ©Omosivie Maduka, Godwin Akpan, Sylvester Maleghemi. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 30.11.2017.

Titan LEAF: A Sky Rover Granting Targeted Access to Titan's Lakes and Plains

NASA Astrophysics Data System (ADS)

Ross, Floyd; Lee, Greg; Sokol, Daniel; Goldman, Benjamin; Bolisay, Linden

2016-10-01

Northrop Grumman, in collaboration with L'Garde Inc. and Global Aerospace Corporation (GAC), has been developing the Titan Lifting Entry Atmospheric Flight (T-LEAF) sky rover to roam the atmosphere and observe at close quarters the lakes and plains of Titan. T-LEAF also supports surface exploration and science by providing precision delivery of in situ instruments to the surface.T-LEAF is a maneuverable, buoyant air vehicle. Its aerodynamic shape provides its maneuverability, and its internal helium envelope reduces propulsion power requirements and also the risk of crashing. Because of these features, T-LEAF is not restricted to following prevailing wind patterns. This freedom of mobility allows it be commanded to follow the shorelines of Titan's methane lakes, for example, or to target very specific surface locations.T-LEAF utilizes a variable power propulsion system, from high power at ~200W to low power at ~50W. High power mode uses the propellers and control surfaces for additional mobility and maneuverability. It also allows the vehicle to hover over specific locations for long duration surface observations. Low power mode utilizes GAC's Titan Winged Aerobot (TWA) concept, currently being developed with NASA funding, which achieves guided flight without the use of propellers or control surfaces. Although slower than high powered flight, this mode grants increased power to science instruments while still maintaining control over direction of travel.Additionally, T-LEAF is its own entry vehicle, with its leading edges protected by flexible thermal protection system (f-TPS) materials already being tested by NASA's Hypersonic Inflatable Aerodynamic Decelerator (HIAD) group. This f-TPS technology allows T-LEAF to inflate in space, like HIAD, and then enter the atmosphere fully deployed. This approach accommodates entry velocities from as low as ~1.8 km/s if entering from Titan orbit, up to ~6 km/s if entering directly from Saturn orbit, like the Huygens probe.This presentation will discuss each of these topic areas, showing that a sky rover like T-LEAF is an ideal option for exploration of both the surface and atmosphere of Titan.

Dynamics of ambulatory surgery centers and hospitals market entry.

PubMed

Housman, Michael; Al-Amin, Mona

2013-08-01

In this article, we investigate the diversity of healthcare delivery organizations by comparing the market determinants of hospitals entry rates with those of ambulatory surgery centers (ASCs). Unlike hospitals, ASCs is one of the growing populations of specialized healthcare delivery organizations. There are reasons to believe that firm entry patterns differ within growing organizational populations since these markets are characterized by different levels of organizational legitimacy, technological uncertainty, and information asymmetry. We compare the entry patterns of firms in a mature population of hospitals to those of firms within a growing population of ASCs. By using patient-level datasets from the state of Florida, we break down our explanatory variables by facility type (ASC vs. hospital) and utilize negative binomial regression models to evaluate the impact of niche density on ASC and hospital entry. Our results indicate that ASCs entry rates is higher in markets with overlapping ASCs while hospitals entry rates are less in markets with overlapping hospitals and ASCs. These results are consistent with the notion that firms in growing populations tend to seek out crowded markets as they compete to occupy the most desirable market segments while firms in mature populations such as general hospitals avoid direct competition. © The Author(s) 2013 Reprints and permissions:]br]sagepub.co.uk/journalsPermissions.nav.

Scaleable manufacture of HIV-1 entry inhibitor griffithsin and validation of its safety and efficacy as a topical microbicide component

PubMed Central

O'Keefe, Barry R.; Vojdani, Fakhrieh; Buffa, Viviana; Shattock, Robin J.; Montefiori, David C.; Bakke, James; Mirsalis, Jon; d'Andrea, Anna-Lisa; Hume, Steven D.; Bratcher, Barry; Saucedo, Carrie J.; McMahon, James B.; Pogue, Gregory P.; Palmer, Kenneth E.

2009-01-01

To prevent sexually transmitted HIV, the most desirable active ingredients of microbicides are antiretrovirals (ARVs) that directly target viral entry and avert infection at mucosal surfaces. However, most promising ARV entry inhibitors are biologicals, which are costly to manufacture and deliver to resource-poor areas where effective microbicides are urgently needed. Here, we report a manufacturing breakthrough for griffithsin (GRFT), one of the most potent HIV entry inhibitors. This red algal protein was produced in multigram quantities after extraction from Nicotiana benthamiana plants transduced with a tobacco mosaic virus vector expressing GRFT. Plant-produced GRFT (GRFT-P) was shown as active against HIV at picomolar concentrations, directly virucidal via binding to HIV envelope glycoproteins, and capable of blocking cell-to-cell HIV transmission. GRFT-P has broad-spectrum activity against HIV clades A, B, and C, with utility as a microbicide component for HIV prevention in established epidemics in sub-Saharan Africa, South Asia, China, and the industrialized West. Cognizant of the imperative that microbicides not induce epithelial damage or inflammatory responses, we also show that GRFT-P is nonirritating and noninflammatory in human cervical explants and in vivo in the rabbit vaginal irritation model. Moreover, GRFT-P is potently active in preventing infection of cervical explants by HIV-1 and has no mitogenic activity on cultured human lymphocytes. PMID:19332801

Mobile Learning

ERIC Educational Resources Information Center

Hockly, Nicky

2013-01-01

In this series, we explore current technology-related themes and topics. The series aims to discuss and demystify what may be new areas for some readers and to consider their relevance to English language teachers. In future articles, we will be covering topics such as learning technologies in low-resource environments, personal learning networks,…

Mineral Resources and the Environment.

ERIC Educational Resources Information Center

National Academy of Sciences, Washington, DC.

This report presents the findings and recommendations of panels created by the Committee on Mineral Resources and the Environment (COMRATE) to study four topic areas of mineral resources and the environment. The topic areas studied by the panels were: technology, supply, the environment, and demand. Section I, the report of the technology panel,…

Genetics Home Reference: 3-beta-hydroxysteroid dehydrogenase deficiency

MedlinePlus

... Topic: Adrenal Gland Disorders Health Topic: Assisted Reproductive Technology Health Topic: Infertility Genetic and Rare Diseases Information Center (1 link) 3-beta-hydroxysteroid dehydrogenase deficiency Educational Resources (6 links) Boston Children's Hospital: Congenital Adrenal ...

Development of a Smartphone Application to Capture Carbohydrate, Lipid, and Protein Contents of Daily Food: Need for Integration in Artificial Pancreas for Patients With Type 1 Diabetes?

PubMed

Diouri, Omar; Place, Jerome; Traverso, Magali; Georgescu, Vera; Picot, Marie-Christine; Renard, Eric

2015-09-30

Meal lipids (LIP) and proteins (PRO) may influence the effect of insulin doses based on carbohydrate (CHO) counting in patients with type 1 diabetes (T1D). We developed a smartphone application for CHO, LIP, and PRO counting in daily food and assessed its usability in real-life conditions and potential usefulness. Ten T1D patients used the android application for 1 week to collect their food intakes. Data included meal composition, premeal and 2-hour postmeal blood glucose, corrections for hypo- or hyperglycemia after meals, and time for entering meals in the application. Meal insulin doses were based on patients' CHO counting (application in blinded mode). Linear mixed models were used to assess the statistical differences. In all, 187 meals were analyzed. Average computed CHO amount was 74.37 ± 31.78 grams; LIP amount: 20.26 ± 14.28 grams and PRO amount: 25.68 ± 16.68 grams. Average CHO, LIP, and PRO contents were significantly different between breakfast and lunch/dinner. The average time for meal entry in the application moved from 3-4 minutes to 2.5 minutes during the week. No significant impact of LIP and PRO was found on available blood glucose values. Our study shows CHO, LIP, and PRO intakes can be easily captured by an application on smartphone for meal entry used by T1D patients. Although LIP and PRO meal contents did not influence glucose levels when insulin doses were based on CHO in this pilot study, this application could be used for further investigation of this topic, including in closed-loop conditions. © 2015 Diabetes Technology Society.

Astronomy as a Tool for Training the Next Generation Technical Workforce

NASA Astrophysics Data System (ADS)

Romero, V.; Walsh, G.; Ryan, W.; Ryan, E.

A major challenge for today's institutes of higher learning is training the next generation of scientists, engineers, and optical specialists to be proficient in the latest technologies they will encounter when they enter the workforce. Although research facilities can offer excellent hands-on instructional opportunities, integrating such experiential learning into academic coursework without disrupting normal operations at such facilities can be difficult. Also, motivating entry level students to increase their skill levels by undertaking and successfully completing difficult coursework can require more creative instructional approaches, including fostering a fun, non-threatening environment for enhancing basic abilities. Astronomy is a universally appealing subject area, and can be very effective as a foundation for cultivating advanced competencies. We report on a project underway at the New Mexico Institute of Mining and Technology (NM Tech), a science and engineering school in Socorro, NM, to incorporate a state-of-the-art optical telescope and laboratory experiments into an entry-level course in basic engineering. Students enrolled in an explosive engineering course were given a topical problem in Planetary Astronomy: they were asked to develop a method to energetically mitigate a potentially hazardous impact between our planet and a Near-Earth asteroid to occur sometime in the future. They were first exposed to basic engineering training in the areas of fracture and material response to failure under different environmental conditions through lectures and traditional laboratory exercises. The students were then given access to NM Tech's Magdalena Ridge Observatory's (MRO) 2.4-meter telescope to collect physical characterization data, (specifically shape information) on two potentially hazardous asteroids (one roughly spherical, the other an elongated ellipsoid). Finally, the students used NM Tech's Energetic Materials Research and Testing Center (EMRTC) to perform field experiments to discern how an object's shape affects disruptive outcomes, and what must be factored into mitigation schemes to attain the desired result of complete destruction of the object. The scientific findings (details will be presented) derived by the students were valuable, and the students benefited from this non-traditional teaching approach such that they acquired a superior appreciation for research and experimentation, and exited the course with an increased motivation to continue their engineering training.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Cynthia Lee

There is a need in security systems to rapidly and accurately grant access of authorized personnel to a secure facility while denying access to unauthorized personnel. In many cases this role is filled by security personnel, which can be very costly. Systems that can perform this role autonomously without sacrificing accuracy or speed of throughput are very appealing. To address the issue of autonomous facility access through the use of technology, the idea of a ''secure portal'' is introduced. A secure portal is a defined zone where state-of-the-art technology can be implemented to grant secure area access or to allowmore » special privileges for an individual. Biometric technologies are of interest because they are generally more difficult to defeat than technologies such as badge swipe and keypad entry. The biometric technologies selected for this concept were facial and gait recognition. They were chosen since they require less user cooperation than other biometrics such as fingerprint, iris, and hand geometry and because they have the most potential for flexibility in deployment. The secure portal concept could be implemented within the boundaries of an entry area to a facility. As a person is approaching a badge and/or PIN portal, face and gait information can be gathered and processed. The biometric information could be fused for verification against the information that is gathered from the badge. This paper discusses a facial recognition technology that was developed for the purposes of providing high verification probabilities with low false alarm rates, which would be required of an autonomous entry control system. In particular, a 3-D facial recognition approach using Fisher Linear Discriminant Analysis is described. Gait recognition technology, based on Hidden Markov Models has been explored, but those results are not included in this paper. Fusion approaches for combining the results of the biometrics would be the next step in realizing the secure portal concept.« less

Management and Marketing. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in management and marketing occupations, use technology in these fields effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale…

Tourism Studies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide, focusing on tourism studies, defines competencies that: help students build daily living skills, investigate career options in the design and repair of motor vehicles, use technology in these fields effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. Section A…

Vignettes of Several Existing Resources for Improving Rural Science, Mathematics, and Technology Education.

ERIC Educational Resources Information Center

Crosby, Greg, Comp.

This directory lists 24 organizations providing educational resource materials on rural science and technology, conservation, and the environment. Each entry contains the address and phone number of the organization, name of a contact person, and brief description of programs, activities, publications, and services available. Resource materials…

Logistics. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in logistics occupations, use technology in the logistics field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale and…

Principles of Technology, Units 1-7. Curriculum Guide.

ERIC Educational Resources Information Center

Campbell, Robert, Comp.

This Idaho secondary education curriculum guide provides lists of tasks, performance objectives, and enabling objectives for instruction intended to impart entry-level employment skills in industrial technology. The first list is a general job competencies task profile, followed by a sheet on which teachers can evaluate students' general job…

Graphics Design Technology Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Idaho secondary education curriculum guide provides lists of tasks, performance objectives, and enabling objectives for instruction intended to impart entry-level employment skills in graphics design technology. The first list states all tasks for 11 areas; separate lists for each area follow. Each task on the lists is accompanied by a…

Financial Management. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in financial management, use technology in the financial management field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale…

Teaching Soft Skills Employers Need

ERIC Educational Resources Information Center

Ellis, Maureen; Kisling, Eric; Hackworth, Robbie G.

2014-01-01

This study identifies the soft skills community colleges teach in an office technology course and determines whether the skills taught are congruent with the soft skills employers require in today's entry-level office work. A qualitative content analysis of a community college office technology soft skills course was performed using 23 soft skills…

Analysis of bluetooth and wi-fi technology to measure wait times of personal vehicles at Arizona-Mexico ports of entry.

DOT National Transportation Integrated Search

2015-11-01

Robust travel time data collection is possible using Bluetooth or Wi-Fi technology that : matches anonymous MAC addresses from discoverable electronic devices (e.g., smart phones) : to determine travel time along a roadway segment. Several hundred...

Analysis of bluetooth and wi-fi technology to measure wait times of personal vehicles at Arizona-Mexico ports of entry : [executive summary].

DOT National Transportation Integrated Search

2015-11-01

The Arizona Department of Transportation (ADOT), Office of P3 Initiatives and International : Affairs selected Lee Engineering to analyze the penetration rate of Anonymous Re-Identification : (ARID) technology to measure wait time of U.S. and Mexico ...

Cosmetology Studies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in cosmetology, use technology in the cosmetology field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs in the field. The first section provides a program rationale and…

Cubesat Application for Planetary Entry (CAPE) Missions: Micro-Return Capsule (MIRCA)

NASA Technical Reports Server (NTRS)

Esper, Jaime

2016-01-01

The Cubesat Application for Planetary Entry Missions (CAPE) concept describes a high-performing Cubesat system which includes a propulsion module and miniaturized technologies capable of surviving atmospheric entry heating, while reliably transmitting scientific and engineering data. The Micro Return Capsule (MIRCA) is CAPE's first planetary entry probe flight prototype. Within this context, this paper briefly describes CAPE's configuration and typical operational scenario, and summarizes ongoing work on the design and basic aerodynamic characteristics of the prototype MIRCA vehicle. CAPE not only opens the door to new planetary mission capabilities, it also offers relatively low-cost opportunities especially suitable to university participation. In broad terms, CAPE consists of two main functional components: the "service module" (SM), and "CAPE's entry probe" (CEP). The SM contains the subsystems necessary to support vehicle targeting (propulsion, ACS, computer, power) and the communications capability to relay data from the CEP probe to an orbiting "mother-ship". The CEP itself carries the scientific instrumentation capable of measuring atmospheric properties (such as density, temperature, composition), and embedded engineering sensors for Entry, Descent, and Landing (EDL). The first flight of MIRCA was successfully completed on 10 October 2015 as a "piggy-back" payload onboard a NASA stratospheric balloon launched from Ft. Sumner, NM.

Airborne Observation of the Hayabusa Sample Return Capsule Re-Entry

NASA Technical Reports Server (NTRS)

Grinstead, Jay H.; Jenniskens, Peter; Cassell, Alan M.; Albers, James; Winter, Michael W.

2011-01-01

NASA Ames Research Center and the SETI Institute collaborated on an effort to observe the Earth re-entry of the Japan Aerospace Exploration Agency's Hayabusa sample return capsule. Hayabusa was an asteroid exploration mission that retrieved a sample from the near-Earth asteroid Itokawa. Its sample return capsule re-entered over the Woomera Prohibited Area in southern Australia on June 13, 2010. Being only the third sample return mission following NASA's Genesis and Stardust missions, Hayabusa's return was a rare opportunity to collect aerothermal data from an atmospheric entry capsule returning at superorbital speeds. NASA deployed its DC-8 airborne laboratory and a team of international researchers to Australia for the re-entry. For approximately 70 seconds, spectroscopic and radiometric imaging instruments acquired images and spectra of the capsule, its wake, and destructive re-entry of the spacecraft bus. Once calibrated, spectra of the capsule will be interpreted to yield data for comparison with and validation of high fidelity and engineering simulation tools used for design and development of future atmospheric entry system technologies. A brief summary of the Hayabusa mission, the preflight preparations and observation mission planning, mission execution, and preliminary spectral data are documented.

Product-line extensions and pricing strategies of brand-name drugs facing patent expiration.

PubMed

Hong, Song Hee; Shepherd, Marvin D; Scoones, David; Wan, Thomas T H

2005-01-01

This study proposed an alternative to brand loyalty as the explanation for the continued price rigidity of patent-expired brand-name prescription drugs despite the increase in market entry of generic drugs facilitated by the 1984 Drug Price Competition and Patent Term Restoration Act. Study hypotheses were to test (1) whether market entries of new-product extensions are associated with market success of original brand-name drugs before generic drug entry, and (2) whether original brand-name drugs exhibit price rigidity to generic entry only when they are extended. The design is a retrospective follow-up study for the prescription drug brands that lost their patents between 1987 and 1992. The drug brands were limited to nonantibiotic, orally administered drugs containing only 1 active pharmaceutical ingredient. Information on patent expiration, entry of a product extension, and market success were determined from the U.S. Food and Drug Administration.s Orange Book, First DataBank, and American Druggist, respectively. Market success was defined as whether an original drug brand was listed in the top 100 prescriptions most frequently dispensed before facing generic entry. Product-line extension was defined as the appearance of another product that a company introduces within the same market after its existing product. Drug prices were average wholesale prices from the Drug Topics Red Book. The relationship between product-line extension and market success was examined using a logistic regression analysis. The price rigidity to entry was tested using a panel regression analysis. A total of 27 drug brands lost their patents between 1987 and 1992. Drug brands that achieved market success were 16 times more likely to be extended than were those that did not (OR=16, 95% confidence interval, 2.12-120.65). The price rigidity to entry existed in drug brands with extensions (beta=2.65%, P <0.033), but not in those brands without extensions (beta=-2.40%, P <0.001). This study provided some support for the alternative explanation to brand loyalty that a new product-line extension introduced for an original brand helps the original price be rigid despite the entry of generic drugs facilitated by the 1984 Drug Price Competition and Patent Term Restoration Act.

The Adaptable, Deployable Entry and Placement Technology (ADEPT)

NASA Technical Reports Server (NTRS)

Wercinski, Paul

2017-01-01

The initial system-level development of the nano-ADEPT architecture will culminate in the launch of a 0.7 meter deployed diameter ADEPT sounding rocket flight experiment named, SR-1. Launch is planned for August 2017. The test will utilize the NASA Flight Opportunities Program sounding rocket platform provided by UP Aerospace to launch SR-1 to an apogee over 100 km and achieve re-entry conditions with a peak velocity near Mach 3. The SR-1 flight experiment will demonstrate most of the primary end-to-end mission stages including: launch in a stowed configuration, separation and deployment in exo-atmospheric conditions, and passive ballistic re-entry of a 70-degree half-angle faceted cone geometry.

KSC-03PP-0146

NASA Technical Reports Server (NTRS)

2003-01-01

KENNEDY SPACE CENTER, FLA. - STS-107 David Brown chats with the Closeout Crew during final preparations of his launch and entry suit in the White Room. The environmentally controlled chamber is mated to Space Shuttle Columbia for entry into the Shuttle. The hatch is seen in the background right. STS-107 is a mission devoted to research and will include more than 80 experiments that will study Earth and space science, advanced technology development, and astronaut health and safety. The payload on Space Shuttle Columbia includes FREESTAR (Fast Reaction Experiments Enabling Science, Technology, Applications and Research) and the SHI Research Double Module (SHI/RDM), known as SPACEHAB. Experiments on the module range from material sciences to life sciences. Liftoff is scheduled for 10:39 a.m. EST.

KSC-03pp0146

NASA Image and Video Library

2003-01-16

KENNEDY SPACE CENTER, FLA. - STS-107 David Brown chats with the Closeout Crew during final preparations of his launch and entry suit in the White Room. The environmentally controlled chamber is mated to Space Shuttle Columbia for entry into the Shuttle. The hatch is seen in the background right. STS-107 is a mission devoted to research and will include more than 80 experiments that will study Earth and space science, advanced technology development, and astronaut health and safety. The payload on Space Shuttle Columbia includes FREESTAR (Fast Reaction Experiments Enabling Science, Technology, Applications and Research) and the SHI Research Double Module (SHI/RDM), known as SPACEHAB. Experiments on the module range from material sciences to life sciences. Liftoff is scheduled for 10:39 a.m. EST.

KSC-03pp0145

NASA Image and Video Library

2003-01-16

KENNEDY SPACE CENTER, FLA. - STS-107 Mission Specialist Laurel Clark waves to a camera out of view during final preparations of her launch and entry suit in the White Room. The environmentally controlled chamber is mated to Space Shuttle Columbia for entry into the Shuttle. The hatch is seen in the background right. STS-107 is a mission devoted to research and will include more than 80 experiments that will study Earth and space science, advanced technology development, and astronaut health and safety. The payload on Space Shuttle Columbia includes FREESTAR (Fast Reaction Experiments Enabling Science, Technology, Applications and Research) and the SHI Research Double Module (SHI/RDM), known as SPACEHAB. Experiments on the module range from material sciences to life sciences. Liftoff is scheduled for 10:39 a.m. EST.

KSC-03pp0144

NASA Image and Video Library

2003-01-16

KENNEDY SPACE CENTER, FLA. -- STS-107 Mission Specialist Kalpana Chawla gets help with her launch and entry suit from the Closeout Crew in the White Room. The environmentally controlled chamber is mated to Space Shuttle Columbia for entry into the Shuttle. The hatch is seen in the background right. STS-107 is a mission devoted to research and will include more than 80 experiments that will study Earth and space science, advanced technology development, and astronaut health and safety. The payload on Space Shuttle Columbia includes FREESTAR (Fast Reaction Experiments Enabling Science, Technology, Applications and Research) and the SHI Research Double Module (SHI/RDM), known as SPACEHAB. Experiments on the module range from material sciences to life sciences. Liftoff is scheduled for 10:39 a.m. EST.

KSC-03pp0147

NASA Image and Video Library

2003-01-16

KENNEDY SPACE CENTER, FLA. -- STS-107 Payload Commander Michael Anderson gets help with his launch and entry suit from the Closeout Crew in the White Room. The environmentally controlled chamber is mated to Space Shuttle Columbia for entry into the Shuttle. Behind him is Pilot William "Willie" McCool. STS-107 is a mission devoted to research and will include more than 80 experiments that will study Earth and space science, advanced technology development, and astronaut health and safety. The payload on Space Shuttle Columbia includes FREESTAR (Fast Reaction Experiments Enabling Science, Technology, Applications and Research) and the SHI Research Double Module (SHI/RDM), known as SPACEHAB. Experiments on the module range from material sciences to life sciences. Liftoff is scheduled for 10:39 a.m. EST.

KSC-03pp0148

NASA Image and Video Library

2003-01-16

KENNEDY SPACE CENTER, FLA. - STS-107 Pilot William "Willie" McCool (center) gets help with his launch and entry suit from the Closeout Crew in the White Room. The environmentally controlled chamber is mated to Space Shuttle Columbia for entry into the Shuttle. In the foreground, left, is Mission Specialist David Brown. STS-107 is a mission devoted to research and will include more than 80 experiments that will study Earth and space science, advanced technology development, and astronaut health and safety. The payload on Space Shuttle Columbia includes FREESTAR (Fast Reaction Experiments Enabling Science, Technology, Applications and Research) and the SHI Research Double Module (SHI/RDM), known as SPACEHAB. Experiments on the module range from material sciences to life sciences. Liftoff is scheduled for 10:39 a.m. EST.

The inclusion of Science Technology Society topics in junior high school earth science textbooks

NASA Astrophysics Data System (ADS)

Fadhli, Fathi Ali

2000-10-01

The Science Technology Society (STS) approach is a major science education reform through which a scientifically literate citizen could be produced. The teaching of science through STS approach is centered on science and technology related issues and problems. The purpose of this study was to analyze five earth science textbooks published in the 1990's for their inclusion of twelve sciences and technology related issues and problems and for their inclusion of activities focused on STS. The selected earth science textbooks were; Scott Foresman, Heath, Holt, Merrill and Prentice-Hall. The targeted twelve issues and problems were identified by Bybee (1987), as the most important global science and technology related issues and problems. The numbers of full text pages devoted to each topic were determined by classifying each segment to one of the targeted topics. In addition, the numbers of STS activities were also determined by using criteria developed for this study. ANOVA statistical analyses and t-tests showed that the analyzed earth science textbooks treated the studied STS issues and problems and treated the STS activities differently. It was found that six of the studied issues and problems were constantly receiving more attention in all the analyzed earth science textbooks than the rest of the topics. These topics were; Air Quality and Atmosphere, Energy Shortages, Water Resources, Land Use, Hazardous Substances, and Mineral Resources. The overall results revealed that only an average of 8.82% of the text pages in all the analyzed earth science textbooks were devoted to STS topics and 5.49% of the activities in all the analyzed earth science textbooks were focused on STS topics. However, none of the activities focused on STS topics were presented in STS approach as defined by NSTA. The percentage of STS topics inclusion and the percentage of activities focused on STS topics were considered to be very low. Accordingly, the objectives and goals of STS approach will not be achieved through using the analyzed earth science textbooks. The low percentages of STS activities and topics indicated also that the STS approach would not be fairly presented in science classrooms as long as science teachers depend on science textbooks 90% of their teaching time. Moreover, the results of this study revealed also that the inclusion of STS approach in science textbooks is still considered to be very low despite the support provided to the STS approach by science teachers, educators, organizations, and education departments and also despite of the publishing of Project Syntheses (1977) since twenty eight years ago.

Multi-Mission System Analysis for Planetary Entry (M-SAPE) Version 1

NASA Technical Reports Server (NTRS)

Samareh, Jamshid; Glaab, Louis; Winski, Richard G.; Maddock, Robert W.; Emmett, Anjie L.; Munk, Michelle M.; Agrawal, Parul; Sepka, Steve; Aliaga, Jose; Zarchi, Kerry;

Field of first magnetic flux entry and pinning strength of superconductors for rf application measured with muon spin rotation

DOE PAGES

Junginger, Tobias; Abidi, S. H.; Maffett, R. D.; ...

2018-03-16

Here, the performance of superconducting radiofrequency (SRF) cavities used for particle accelerators depends on two characteristic material parameters: field of first flux entry H entry and pinning strength. The former sets the limit for the maximum achievable accelerating gradient, while the latter determines how efficiently flux can be expelled related to the maximum achievable quality factor. In this paper, a method based on muon spin rotation (μSR) is developed to probe these parameters on samples. It combines measurements from two different spectrometers, one being specifically built for these studies and samples of different geometries. It is found that annealing atmore » 1400°C virtually eliminates all pinning. Such an annealed substrate is ideally suited to measure H entry of layered superconductors, which might enable accelerating gradients beyond bulk niobium technology.« less

Survey of the supporting research and technology for the thermal protection of the Galileo Probe

NASA Technical Reports Server (NTRS)

Howe, J. T.; Pitts, W. C.; Lundell, J. H.

1981-01-01

The Galileo Probe, which is scheduled to be launched in 1985 and to enter the hydrogen-helium atmosphere of Jupiter up to 1,475 days later, presents thermal protection problems that are far more difficult than those experienced in previous planetary entry missions. The high entry speed of the Probe will cause forebody heating rates orders of magnitude greater than those encountered in the Apollo and Pioneer Venus missions, severe afterbody heating from base-flow radiation, and thermochemical ablation rates for carbon phenolic that rival the free-stream mass flux. This paper presents a comprehensive survey of the experimental work and computational research that provide technological support for the Probe's heat-shield design effort. The survey includes atmospheric modeling; both approximate and first-principle computations of flow fields and heat-shield material response; base heating; turbulence modelling; new computational techniques; experimental heating and materials studies; code validation efforts; and a set of 'consensus' first-principle flow-field solutions through the entry maneuver, with predictions of the corresponding thermal protection requirements.

Plasma Assisted ISRU at Mars

NASA Technical Reports Server (NTRS)

Moses, Robert W.; Kuhl, Christopher A.; Templeton, Justin D.

2005-01-01

NASA's exploration goals for Mars and Beyond will require new power systems and in situ resource utilization (ISRU) technologies. Regenerative aerobraking may offer a revolutionary approach for in situ power generation and oxygen harvesting during these exploration missions. In theory, power and oxygen can be collected during aerobraking and stored for later use in orbit or on the planet. This technology would capture energy and oxygen from the plasma field that occurs naturally during hypersonic entry using well understood principles of magnetohydrodynamics and oxygen filtration. This innovative approach generates resources upon arrival at the operational site, and thus greatly differs from the traditional approach of taking everything you need with you from Earth. Fundamental analysis, computational fluid dynamics, and some testing of experimental hardware have established the basic feasibility of generating power during a Mars entry. Oxygen filtration at conditions consistent with spacecraft entry parameters at Mars has been studied to a lesser extent. Other uses of the MHD power are presented. This paper illustrates how some features of regenerative aerobraking may be applied to support human and robotic missions at Mars.

Arsenic Removal from Drinking Water by Point of Entry/Point of Use Adsorptive Media U.S. EPA Demonstration Project at Oregon Institute of Technology at Klamath Falls, OR - Final Performance Evaluation Report

EPA Science Inventory

This report documents the activities performed during and the results obtained from the arsenic removal treatment technology demonstration project at Oregon Institute of Technology (OIT) at Klamath Falls, OR. The objectives of the project were to evaluate: (1) the effectiveness...

Teaching on Science, Technology and the Nuclear Arms Race.

ERIC Educational Resources Information Center

Schroeer, Dietrich

1983-01-01

Describes a course focusing on science, technology, and the nuclear arms race. Two sample homework exercises and course topics are provided. Topics, with lists of questions that might be addressed, focus on nuclear weapons, alternatives to deterrence, and arms control. Approaches to teaching about the nuclear arms race are also provided. (JN)

Teaching of Computer Science Topics Using Meta-Programming-Based GLOs and LEGO Robots

ERIC Educational Resources Information Center

Štuikys, Vytautas; Burbaite, Renata; Damaševicius, Robertas

2013-01-01

The paper's contribution is a methodology that integrates two educational technologies (GLO and LEGO robot) to teach Computer Science (CS) topics at the school level. We present the methodology as a framework of 5 components (pedagogical activities, technology driven processes, tools, knowledge transfer actors, and pedagogical outcomes) and…

Goddard Conference on Mass Storage Systems and Technologies, Volume 1

NASA Technical Reports Server (NTRS)

Kobler, Ben (Editor); Hariharan, P. C. (Editor)

1993-01-01

Copies of nearly all of the technical papers and viewgraphs presented at the Goddard Conference on Mass Storage Systems and Technologies held in Sep. 1992 are included. The conference served as an informational exchange forum for topics primarily relating to the ingestion and management of massive amounts of data and the attendant problems (data ingestion rates now approach the order of terabytes per day). Discussion topics include the IEEE Mass Storage System Reference Model, data archiving standards, high-performance storage devices, magnetic and magneto-optic storage systems, magnetic and optical recording technologies, high-performance helical scan recording systems, and low end helical scan tape drives. Additional topics addressed the evolution of the identifiable unit for processing purposes as data ingestion rates increase dramatically, and the present state of the art in mass storage technology.

48 CFR 15.602 - Policy.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., Small Business Innovation Research topics, Small Business Technology Transfer Research topics, Program Research and Development Announcements, or any other Government-initiated solicitation or program. When the new and innovative ideas do not fall under topic areas publicized under those programs or techniques...

48 CFR 15.602 - Policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., Small Business Innovation Research topics, Small Business Technology Transfer Research topics, Program Research and Development Announcements, or any other Government-initiated solicitation or program. When the new and innovative ideas do not fall under topic areas publicized under those programs or techniques...

48 CFR 15.602 - Policy.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., Small Business Innovation Research topics, Small Business Technology Transfer Research topics, Program Research and Development Announcements, or any other Government-initiated solicitation or program. When the new and innovative ideas do not fall under topic areas publicized under those programs or techniques...

ADEPT Heat Shield Testing

NASA Image and Video Library

2015-10-16

NASA is developing the next generation of heat shield to enable astronauts to go to Mars and other deep space destinations. Called the Adaptive Deployable Entry and Placement Technology or ADEPT, the heat shield is mechanically deployable and uses a flexible woven carbon fabric as its skin. Recently, engineers successfully completed a series of tests in the Ames Arc Jet facility. Other tests conducted in wind tunnels at Ames demonstrated that the ADEPT materials and system perform well under planetary re-entry conditions.

Attacking 22 entries in rugby union: running demands and differences between successful and unsuccessful entries.

PubMed

Tierney, P; Tobin, D P; Blake, C; Delahunt, E

2017-12-01

Global Positioning System (GPS) technology is commonly utilized in team sports, including rugby union. It has been used to describe the average running demands of rugby union. This has afforded an enhanced understanding of the physical fitness requirements for players. However, research in team sports has suggested that training players relative to average demands may underprepare them for certain scenarios within the game. To date, no research has investigated the running demands of attacking 22 entries in rugby union. Additionally, no research has been undertaken to determine whether differences exist in the running intensity of successful and unsuccessful attacking 22 entries in rugby union. The first aim of this study was to describe the running intensity of attacking 22 entries. The second aim of this study was to investigate whether differences exist in the running intensity of successful and unsuccessful attacking 22 entries. Running intensity was measured using meters per minute (m min -1 ) for (a) total distance, (b) running distance, (c) high-speed running distance, and (d) very high-speed running distance. This study provides normative data for the running intensity of attacking 22 entries in rugby union. Forwards achieved greater high-speed running intensity in successful (3.6 m min -1 ) compared to unsuccessful (1.8 m min -1 ) attacking 22 entries. Forwards should try and achieve greater high-speed running intensity in attacking 22 entries to increase the likelihood of successful outcomes during this period of gameplay. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

A new strategy to identify hepatitis B virus entry inhibitors by AlphaScreen technology targeting the envelope-receptor interaction.

PubMed

Saso, Wakana; Tsukuda, Senko; Ohashi, Hirofumi; Fukano, Kento; Morishita, Ryo; Matsunaga, Satoko; Ohki, Mio; Ryo, Akihide; Park, Sam-Yong; Suzuki, Ryosuke; Aizaki, Hideki; Muramatsu, Masamichi; Sureau, Camille; Wakita, Takaji; Matano, Tetsuro; Watashi, Koichi

2018-06-22

Current anti-hepatitis B virus (HBV) agents have limited effect in curing HBV infection, and thus novel anti-HBV agents with different modes of action are in demand. In this study, we applied AlphaScreen assay to high-throughput screening of small molecules inhibiting the interaction between HBV large surface antigen (LHBs) and the HBV entry receptor, sodium taurocholate cotransporting polypeptide (NTCP). From the chemical screening, we identified that rapamycin, an immunosuppressant, strongly inhibited the LHBs-NTCP interaction. Rapamycin inhibited hepatocyte infection with HBV without significant cytotoxicity. This activity was due to impaired attachment of the LHBs preS1 domain to cell surface. Pretreatment of target cells with rapamycin remarkably reduced their susceptibility to preS1 attachment, while rapamycin pretreatment to preS1 did not affect its attachment activity, suggesting that rapamycin targets the host side. In support of this, a surface plasmon resonance analysis showed a direct interaction of rapamycin with NTCP. Consistently, rapamycin also prevented hepatitis D virus infection, whose entry into cells is also mediated by NTCP. We also identified two rapamycin derivatives, everolimus and temsirolimus, which possessed higher anti-HBV potencies than rapamycin. Thus, this is the first report for application of AlphaScreen technology that monitors a viral envelope-receptor interaction to identify viral entry inhibitors. Copyright © 2018 Elsevier Inc. All rights reserved.

Matrix computations in MACSYMA

NASA Technical Reports Server (NTRS)

Wang, P. S.

1977-01-01

Facilities built into MACSYMA for manipulating matrices with numeric or symbolic entries are described. Computations will be done exactly, keeping symbols as symbols. Topics discussed include how to form a matrix and create other matrices by transforming existing matrices within MACSYMA; arithmetic and other computation with matrices; and user control of computational processes through the use of optional variables. Two algorithms designed for sparse matrices are given. The computing times of several different ways to compute the determinant of a matrix are compared.

Aerospace medicine and biology: A continuing bibliography with indexes, supplement 97

NASA Technical Reports Server (NTRS)

1972-01-01

Subject coverage concentrates on the biological, physiological, psychological, and environmental effects to which man is subjected during and following simulated or actual flight in the earth's atmosphere or in interplanetary space. References describing similar effects on biological organisms of lower order are also included. Such related topics as sanitary problems, pharmacology, toxicology, safety and survival, life support systems, exobiology, and personnel factors receive appropriate attention. Each entry consists of a standard citation accompanied by its abstract.

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 94)

NASA Technical Reports Server (NTRS)

1971-01-01

Subject coverage concentrates on the biological, physiological, psychological, and environmental effects to which man is subjected during and following simulated or actual flight in the earth's atmosphere or in interplanetary space. References describing similar effects on biological organisms of lower order are also included. Such related topics as sanitary problems, pharmacology, toxicology, safety and survival, life support systems, exobiology, and personnel factors receive appropriate attention. Each entry consists of a standard citation accompanied by its abstract.

Aerospace medicine and biology: A continuing bibliography with indexes, supplement 96

NASA Technical Reports Server (NTRS)

1971-01-01

Subject coverage concentrates on the biological, physiological, psychological, and environmental effects to which man is subjected during and following simulated or actual flight in the earth's atmosphere or in interplanetary space. References describing similar effects on biological organisms of lower order are also included. Such related topics as sanitary problems, pharmacology, toxicology, safety and survival, life support systems, exobiology, and personnel factors receive appropriate attention. Each entry consists of a standard citation accompanied by its abstract.

Aerospace medicine and biology: A continuing bibliography with indexes, supplement

NASA Technical Reports Server (NTRS)

1972-01-01

Subject coverage concentrates on the biological, physiological, psychological, and environmental effects to which man is subjected during and following simulated or actual flight in the earth's atmosphere or in interplanetary space. References describing similar effects on biological organisms of lower order are also included. Such related topics as sanitary problems, pharmacology, toxicology, safety and survival, life support systems, exobiology, and personnel factors receive appropriate attention. Each entry consists of a standard citation accompanied by its abstract.

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 100)

NASA Technical Reports Server (NTRS)

1972-01-01

Subject coverage concentrates on the biological, physiological, psychological, and environmental effects to which man is subjected during and following simulated or actual flight in the earth's atmosphere or in interplanetary space. Reference describing similar effects on biological organisms of lower order are also included. Such related topics as sanitary problems, pharmacology, toxicology, safety and survival, life support systems, exobiology, and personnel factors receive appropriate attention. Each entry consists of a standard citation accompanied by its abstract.

The British Nursing Index and CINAHL: a comparison of journal title coverage and the implications for information professionals.

PubMed

Briscoe, Simon; Cooper, Chris

2014-09-01

This paper compares the journal coverage of the British Nursing Index (BNI) and the Cumulative Index to Nursing and Allied Health Literature (CINAHL). The main objectives are to assess whether BNI is a useful source of UK publications and to consider the implications for information professionals. Lists of the journals indexed in BNI and CINAHL, CINAHL Plus and CINAHL Complete were compared. The date coverage and article entry date of a selection of UK nursing journals were also compared. One hundred and fifty-nine journals are uniquely indexed in BNI compared with the basic version of CINAHL. Eighty-one journals are uniquely indexed in BNI compared with all versions of CINAHL. Fifty-one of these journals are UK publications. Most of the selected UK nursing journals have earlier start and entry dates in CINAHL than BNI. BNI is smaller than CINAHL, and BNI indexes a relatively small number of unique journals. An information professional with access to CINAHL Plus or CINAHL Complete could reasonably not search BNI for a nursing topic, particularly if the topic is not UK specific. UK nursing research is more likely to benefit from using BNI, although the acquisition of BNI by ProQuest could impact this finding. © 2014 The authors. Health Information and Libraries Journal © 2014 Health Libraries Journal.

Parametric Thermal Soak Model for Earth Entry Vehicles

NASA Technical Reports Server (NTRS)

Agrawal, Parul; Samareh, Jamshid; Doan, Quy D.

2013-01-01

The analysis and design of an Earth Entry Vehicle (EEV) is multidisciplinary in nature, requiring the application many disciplines. An integrated tool called Multi Mission System Analysis for Planetary Entry Descent and Landing or M-SAPE is being developed as part of Entry Vehicle Technology project under In-Space Technology program. Integration of a multidisciplinary problem is a challenging task. Automation of the execution process and data transfer among disciplines can be accomplished to provide significant benefits. Thermal soak analysis and temperature predictions of various interior components of entry vehicle, including the impact foam and payload container are part of the solution that M-SAPE will offer to spacecraft designers. The present paper focuses on the thermal soak analysis of an entry vehicle design based on the Mars Sample Return entry vehicle geometry and discusses a technical approach to develop parametric models for thermal soak analysis that will be integrated into M-SAPE. One of the main objectives is to be able to identify the important parameters and to develop correlation coefficients so that, for a given trajectory, can estimate the peak payload temperature based on relevant trajectory parameters and vehicle geometry. The models are being developed for two primary thermal protection (TPS) materials: 1) carbon phenolic that was used for Galileo and Pioneer Venus probes and, 2) Phenolic Impregnated Carbon Ablator (PICA), TPS material for Mars Science Lab mission. Several representative trajectories were selected from a very large trade space to include in the thermal analysis in order to develop an effective parametric thermal soak model. The selected trajectories covered a wide range of heatload and heatflux combinations. Non-linear, fully transient, thermal finite element simulations were performed for the selected trajectories to generate the temperature histories at the interior of the vehicle. Figure 1 shows the finite element model that was used for the simulations. The results indicate that it takes several hours for the thermal energy to soak into the interior of the vehicle and achieve maximum payload temperatures. In addition, a strong correlation between the heatload and peak payload container temperature is observed that will help establishing the parametric thermal soak model.

A Transformative Undergraduate Field Trip to the Grand Canyon and Death Valley

NASA Astrophysics Data System (ADS)

Smith, J. A.

2014-12-01

Seeing the iconic Grand Canyon and Death Valley in person is a transformative experience for most geologists, including nine undergraduate geology students from upstate New York. The students were enrolled in a one-credit course designed around a nine-day spring-break field trip to Grand Canyon National Park (GCNP) and Death Valley National Park (DVNP). We met once a week before the trip to plan day-to-day activities and discuss background geologic information. Students selected a research topic related to our itinerary and wrote a guidebook entry for the topic. Students' entries were combined with papers, maps, and background material to make a guidebook. The printed guidebooks provided students with a "publication" of their work to show to others and refer to in the field. The nine-day field trip started with a flight into Las Vegas, NV, on 3/1/14. We spent three nights camping at the South Rim of the Grand Canyon, one night camping in Valley of Fire State Park (VOFSP, 55 mi N of Las Vegas), and three nights staying at the Shoshone Education and Research Center (SHEAR) east of Death Valley. Highlights of the trip included the hike along the Bright Angel Trail (and fault) to Plateau Point and recognition of the Great Unconformity at GCNP; the White Domes loop hike, camping at the Beehives, and observation of the Muddy Mountain Overthrust in VOFSP; and hikes at Ubehebe Crater, Badwater Salt Flat, and Natural Bridge Canyon in DVNP. Each student presented his/her research topic at a pertinent point in the field trip; students were impressively well-prepared. One requirement of the course was a poster presentation on each student's research topic at our Undergraduate Research Symposium in April. For most of the students, the poster session was the first experience preparing and presenting a poster. In addition, the class gave a joint colloquium presentation to several hundred science majors and a number of science faculty at Saint Rose. Each student spoke for five minutes on his/her research topic, accompanied by slides. This was their first experience giving a talk in public, and most learned the lesson that preparation and practice are keys to a good talk. Course evaluations were overwhelmingly positive. In my experience, there is no substitute for seeing geology in the field; the students agreed.

Student journals: a means of assessing transformative learning in aging related courses.

PubMed

Cohen, Adrienne L; Pitman Brown, Pamela; Morales, Justin P

2015-01-01

In courses where topics are sensitive or even considered taboo for discussion, it can be difficult to assess students' deeper learning. In addition, incorporating a wide variety of students' values and beliefs, designing instructional strategies and including varied assessments adds to the difficulty. Journal entries or response notebooks can highlight reflection upon others' viewpoints, class readings, and additional materials. These are useful across all educational levels in deep learning and comprehension strategies assessments. Journaling meshes with transformative learning constructs, allowing for critical self-reflection essential to transformation. Qualitative analysis of journals in a death and dying class reveals three transformative themes: awareness of others, questioning, and comfort. Students' journal entries demonstrate transformative learning via communication with others through increased knowledge/exposure to others' experiences and comparing/contrasting others' personal beliefs with their own. Using transformative learning within gerontology and geriatrics education, as well as other disciplined aging-related courses is discussed.

Design Guide for Aerodynamics Testing of Earth and Planetary Entry Vehicles in a Ballistic Range

NASA Technical Reports Server (NTRS)

Bogdanoff, David W.

2017-01-01

The purpose of this manual is to aid in the design of an aerodynamics test of an earth or planetary entry capsule in a ballistic range. In this manual, much use is made of the results and experience gained in 50 years of ballistic range aerodynamics testing at the NASA Ames Research Center, and in particular, that gained in the last 27 years, while the author was working at NASA Ames. The topics treated herein include: Data to be obtained; flight data needed to design test; Reynolds number and dynamic similarity of flight trajectory and ballistic range test; capabilities of various ballistic ranges; Calculations of swerves due to average and oscillating lift and of drag-induced velocity decreases; Model and sabot design; materials, weights and stresses; Sabot separation; Launches at angle of attack and slapping with paper to produce pitch/yaw oscillations.

Energy and Mines. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in energy and mines, use technology in the fields of energy and mining effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs in the field. The first section provides a program…

Keyless Entry: Building a Text Database Using OCR Technology.

ERIC Educational Resources Information Center

Grotophorst, Clyde W.

1989-01-01

Discusses the use of optical character recognition (OCR) technology to produce an ASCII text database. A tutorial on digital scanning and OCR is provided, and a systems integration project which used the Calera CDP-3000XF scanner and text retrieval software to construct a database of dissertations at George Mason University is described. (four…

Newer Technologies for School Security. ERIC Digest Number 145.

ERIC Educational Resources Information Center

Schneider, Tod

This digest describes several technologies that can be used to control access to, and improve surveillance of, school grounds. Access can be controlled by using "smart" cards to control keyed entries. Many schools have problems with multiple copies of keys, and these card systems are integrated with computer software that allows for…

76 FR 63322 - Agency Information Collection Activities: Form G-28, Revision of an Approved Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... Collection Activities: Form G-28, Revision of an Approved Information Collection; Comment Request ACTION: 60-Day Notice of Information Collection Under Review: Form G- 28, Notice of Entry of Appearance as..., mechanical, or other technological collection techniques, or other forms of information technology, e.g...

Carl D. Perkins Vocational and Applied Technology Education Act of 1990: Selected Resources for Implementation.

ERIC Educational Resources Information Center

Kallembach, Sheri, Comp.; And Others

This document compiles representative resources to assist state and local administrators of vocational special needs programs, special needs educators, counselors, researchers, and policymakers in implementing and complying with the Carl D. Perkins Vocational and Applied Technology Education Act of 1990. Entries in the publications section are…

Solar Energy Directory: A Directory of Domestic and International Firms Involved in Solar Energy.

ERIC Educational Resources Information Center

Centerline Co., Phoenix, AZ.

This directory is intended to provide a link between suppliers of solar energy technology and information and potential users of these products. Included are over 1400 national and international entries. These listings include architects, associations, education sources, wind power technology and information sources, solar research organizations,…

Combining Technology and Narrative in a Learning Environment for Workplace Training.

ERIC Educational Resources Information Center

Nelson, Wayne A.; Wellings, Paula; Palumbo, David; Gupton, Christine

In a project designed to provide training for entry-level job skills in high tech industries, a combination of narrative and technology was employed to aid learners in developing the necessary soft skills (dependability, responsibility, listening comprehension, collaboration, et cetera) sought by employers. The EnterTech Project brought together a…

Student Success Programs at the Northern Alberta Institute of Technology.

ERIC Educational Resources Information Center

Soetaert, Elaine

The Master Student course was introduced at Northern Alberta Institute of Technology to improve student retention; provide individuals with skills to become successful students; and to graduate students with technical, critical thinking, and effective communication skills. The course provides a point of entry into the institution in the areas of…

Thermal Testing of Woven TPS Materials in Extreme Entry Environments

NASA Technical Reports Server (NTRS)

Gonzales, G.; Stackpoole, M.

2014-01-01

NASAs future robotic missions to Venus and outer planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of current mid density ablators (PICA or Avcoat). Therefore mission planners assume the use of a fully dense carbon phenolic heatshield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic (CP) is a robust TPS however its high density and thermal conductivity constrain mission planners to steep entries, high heat fluxes, high pressures and short entry durations, in order for CP to be feasible from a mass perspective. In 2012 the Game Changing Development Program in NASAs Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System to meet the needs of NASAs most challenging entry missions. The high entry conditions pose certification challenges in existing ground based test facilities. Recent updates to NASAs IHF and AEDCs H3 high temperature arcjet test facilities enable higher heatflux (2000 Wcm2) and high pressure (5 atm) testing of TPS. Some recent thermal tests of woven TPS will be discussed in this paper. These upgrades have provided a way to test higher entry conditions of potential outer planet and Venus missions and provided a baseline against carbon phenolic material. The results of these tests have given preliminary insight to sample configuration and physical recession profile characteristics.

Cast Glance Near Infrared Imaging Observations of the Space Shuttle During Hypersonic Re-Entry

NASA Technical Reports Server (NTRS)

Tack, Steve; Tomek, Deborah M.; Horvath, Thomas J.; Verstynen, Harry A.; Shea, Edward J.

2010-01-01

High resolution calibrated infrared imagery of the Space Shuttle was obtained during hypervelocity atmospheric entries of the STS-119, STS-125 and STS128 missions and has provided information on the distribution of surface temperature and the state of the airflow over the windward surface of the Orbiter during descent. This data collect was initiated by NASA s Hypersonic Thermodynamic Infrared Measurements (HYTHIRM) team and incorporated the use of air- and land-based optical assets to image the Shuttle during atmospheric re-entry. The HYTHIRM objective is to develop and implement a set of mission planning tools designed to establish confidence in the ability of an existing optical asset to reliably acquire, track and return global quantitative surface temperatures of the Shuttle during entry. On Space Shuttle Discovery s STS-119 mission, NASA flew a specially modified thermal protection system tile and instrumentation package to monitor heating effects from boundary layer transition during re-entry. On STS-119, the windward airflow on the port wing was deliberately disrupted by a four-inch wide and quarter-inch tall protuberance built into the modified tile. In coordination with this flight experiment, a US Navy NP-3D Orion aircraft was flown 28 nautical miles below Discovery and remotely monitored surface temperature of the Orbiter at Mach 8.4 using a long-range infrared optical package referred to as Cast Glance. Approximately two months later, the same Navy Cast Glance aircraft successfully monitored the surface temperatures of the Orbiter Atlantis traveling at approximately Mach 14.3 during its return from the successful Hubble repair mission. In contrast to Discovery, Atlantis was not part of the Boundary Layer Transition (BLT) flight experiment, thus the vehicle was not configured with a protuberance on the port wing. In September 2009, Cast Glance was again successful in capturing infrared imagery and monitoring the surface temperatures on Discovery s next flight, STS-128. Again, NASA flew a specially modified thermal protection system tile and instrumentation package to monitor heating effects from boundary layer transition during re-entry. During this mission, Cast Glance was able to image laminar and turbulent flow phenomenology optimizing data collection for Mach 14.7. The purpose of this paper is to describe key elements associated with STS-119/125/128 mission planning and execution from the perspective of the Cast Glance flight crew that obtained the imagery. The paper will emphasize a human element of experience, expertise and adaptability seamlessly coupled with Cast Glance system and sensor technology required to manually collect the required imagery. Specific topics will include a near infrared (NIR) camera upgrade that was implemented just prior to the missions, how pre-flight radiance modeling was utilized to optimize the IR sensor configuration, communications, the development of aircraft test support positions based upon Shuttle trajectory information, support to contingencies such as Shuttle one orbit wave-offs/west coast diversions and then the Cast Glance perspective during an actual Shuttle imaging mission.

Public perceptions of the risks of an unfamiliar technology: The case of using nuclear energy sources for space missions

NASA Astrophysics Data System (ADS)

Maharik, Michael

This thesis addresses the public perception of the risk of a technology not widely known to laypeople. Its aims were (1) to characterize public perceptions of the risk of using nuclear energy in space and decisions related to this risk, and (2) to extend the 'mental model' methodology to studying public perception of unfamiliar, risky technologies. A model of the physical processes capable of creating risks from using nuclear energy sources in space was first constructed. Then, knowledge and beliefs related to this topic were elicited from three different groups of people. The generality of the findings was examined in a constructive replication with environmentally-oriented people. The possibility of involving the public in decision-making processes related to engineering macro-design was then investigated. Finally, a communication regarding these risk processes was developed and evaluated in an experiment comparing it with communications produced by NASA. Although they included large portions of the expert model, people's beliefs also had gaps and misconceptions. Respondents often used scientific terms without a clear understanding of what they meant. Respondents' mental models sometimes contained scattered and inconsistent entries. The impact of pre-existing mental models was clearly seen. Different groups of people had different patterns of knowledge and beliefs. Nevertheless, respondents expressed reasonable and coherent opinions on choices among engineering options. The CMU brochure, derived from the study of readers' existing mental models, provided a better risk communication tool than NASA's material, reflecting primarily experts' perspective. The better performance of subjects reading either brochure generally reflected adding knowledge on issues that they had not previously known, rather than correcting wrong beliefs. The communication study confirmed a hypothesis that improving knowledge on risk processes related to the use of a technology causes a more favorable attitude towards that technology. Recommendations related to the design and targeting of risk communication, and to public participation in decision-making on using new and risky technologies, are derived. Additional studies that will elicit laypeople's definitions of risk related to specific technologies, and link their detailed understanding of risk-development processes to the perceived dimensions of risk, are suggested.