Technology Transfer and the Civil Space Program. Volume 2: Workshop proceedings
NASA Technical Reports Server (NTRS)
1992-01-01
The objectives were to (1) provide a top-level review of the Integrated Technology Plan (ITP) and current civil space technology plans, including planning processes and technologies; (2) discuss and assess technology transfer (TT) experiences across a wide range of participants; (3) identify alternate categories/strategies for TT and define the objectives of transfer processes in each case; (4) identify the roles of various government 'stakeholders', aerospace industry, industries at large, and universities in civil space technology research, development, demonstration, and transfer; (5) identify potential barriers and/or opportunities to successful civil space TT; (6) identify specific needs for innovations in policy, programs, and/or procedures to facilitate TT; and (7) develop a plan of attack for the development of a workshop report. Papers from the workshop are presented.
Report of the 4th Workshop for Technology Transfer for Intelligent Compaction Consortium.
DOT National Transportation Integrated Search
2016-03-01
On October 2728, 2015, the Kentucky Transportation Cabinet (KYTC) hosted the 4th workshop for : the Technology Transfer for Intelligent Compaction Consortium (TTICC), a Transportation Pooled Fund : (TPF5(233)) initiative designed to identify, s...
Technology transfer within the NASA Goddard Space Flight Center
NASA Technical Reports Server (NTRS)
Plotkin, Henry H.
1992-01-01
Viewgraphs on technology transfer within the NASA Goddard Space Flight Center presented to Civil Space Technology Development workshop on technology transfer and effectiveness are provided. Topics covered include: obstacles to technology transfer; technology transfer improvement program at GSFC: communication between technology developers and users; and user feedback to technologists.
Fundamental heat transfer research for gas turbine engines
NASA Technical Reports Server (NTRS)
Metzger, D. E. (Editor)
1980-01-01
Thirty-seven experts from industry and the universities joined 24 NASA Lewis staff members in an exchange of ideas on trends in aeropropulsion research and technology, basic analyses, computational analyses, basic experiments, near-engine environment experiments, fundamental fluid mechanics and heat transfer, and hot technology as related to gas turbine engines. The workshop proceedings described include pre-workshop input from participants, presentations of current activity by the Lewis staff, reports of the four working groups, and a workshop summary.
Coastal Inlets Research Program
2013-03-01
structures, adjacent beaches dredging and placement within, regional systems . Transfer technology and products Guidance documents, Workshops...Mitch Brown Coastal Modeling Waves at Navigation System (CMS) Alex Sanchez Structures Lihwa Lin Z ki D i bil kCIRPHonghai Li e em r e C l...MD Inlet Modeling System technology transfer workshop 13 Years of Annu l Wo kshops 40 Cumulativ Workshops , #7 – FSBPA, Jan/Feb 2006
Application transfer activity in Missouri
NASA Technical Reports Server (NTRS)
Barr, D. J.; Johannsen, C. J.
1978-01-01
Experimental demonstrations and workshop instructional courses were conducted to transfer the technology of satellite remote sensing to a wide audience of resource managers. This audience included planning commissions, state agencies, federal agencies, and special councils of the Governor. Some of the experiments and workshops are outlined.
Technology transfer within the government
NASA Technical Reports Server (NTRS)
Russell, John
1992-01-01
The report of a workshop panel concerned with technology transfer within the government is presented. The presentation is made in vugraph form. The assigned subtopic for this panel are as follows: (1) transfer from non-NASA US government technology developers to NASA space missions/programs; and (2) transfer from NASA to other US government space mission programs. A specific area of inquiry was Technology Maturation Milestones. Three areas were investigated: technology development; advanced development; and flight hardware development.
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Binge Eating Disorder Related Topics Section Navigation Weight ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Report of the workshop on transferring X-ray Lithography Synchrotron (XLS) technology to industry
DOE Office of Scientific and Technical Information (OSTI.GOV)
Marcuse, W.
1987-01-01
This paper reports on plans to develop an x-ray synchrotron for use in lithography. The primary concern of the present paper is technology transfer from national laboratories to private industry. (JDH)
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management English English Español Weight Management Obesity is a ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Staying Active at Any Size Related Topics Section ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Health Tips for Adults Related Topics English English ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Tips for Starting Physical Activity
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Tips to Help You Get Active Starting Physical ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Fit for Two: Tips for Pregnancy
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Health Tips for Pregnant Women Related Topics English ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Stay Fit as You Mature Related Topics Section ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Weight-Loss and Nutrition Myths
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Some Myths about Nutrition & Physical Activity Related Topics ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Health Risks of Being Overweight?
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Health Risks of Being Overweight Related Topics Section ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Walking...A Step in the Right Direction!
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Walking: A Step in the Right Direction Related ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Keeping Active and Healthy Eating for Men
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Keeping Active and Healthy Eating for Men Related ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Just Enough for You: About Food Portions
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Just Enough for You: About Food Portions Related ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Choosing a Safe and Successful Weight-Loss Program
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Choosing a Safe and Successful Weight-loss Program ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Transfer of computer software technology through workshops: The case of fish bioenergetics modeling
Johnson, B.L.
1992-01-01
A three-part program is proposed to promote the availability and use of computer software packages to fishery managers and researchers. The approach consists of journal articles that announce new technologies, technical reports that serve as user's guides, and hands-on workshops that provide direct instruction to new users. Workshops, which allow experienced users to directly instruct novices in software operation and application are important, but often neglected. The author's experience with organizing and conducting bioenergetics modeling workshops suggests the optimal workshop would take 2 days, have 10-15 participants, one computer for every two users, and one instructor for every 5-6 people.
Brookhaven National Laboratory technology transfer report, fiscal year 1987
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1987-01-01
The Brookhaven Office of Research and Technology Applications (ORTA) inaugurated two major initiatives. The effort by our ORTA in collaboration with the National Synchrotron Light Source (NSLS) has succeeded in alerting American industry to the potential of using a synchrotron x-ray source for high resolution lithography. We are undertaking a preconstruction study for the construction of a prototype commercial synchrotron and development of an advanced commercial cryogenic synchrotron (XLS). ORTA sponsored a technology transfer workshop where industry expressed its views on how to transfer accelerator technology during the construction of the prototype commercial machine. The Northeast Regional utility Initiative broughtmore » 14 utilities to a workshop at the Laboratory in November. One recommendation of this workshop was to create a Center at the Laboratory for research support on issues of interest to utilities in the region where BNL has unique capability. The ORTA has initiated discussions with the New York State Science and Technology Commission, Cornell University's world renowned Nannofabrication Center and the computer aided design capabilities at SUNY at Stony Brook to create, centered around the NSLS and the XLS, the leading edge semiconductor process technology development center when the XLS becomes operational in two and a half years. 1 fig.« less
Improving Your Health: Tips for African American Men and Women
... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Health Tips for African-Americans Related Topics Section ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Rossomando, Edward F; Benitez, Hubert; Janicki, Bernard W
2004-09-01
In July 1999, the National Institute of Dental and Craniofacial Research (NIDCR) convened a Blue Ribbon Panel that recommended management skills, entrepreneurship, and technology transfer should be included in dental education. The panel's recommendations were implemented in an NIDCR-funded pilot project, "Workshop Course to Promote and Develop Dental Products and Technologies." The workshop consisted of lectures presented by seven faculty members recruited from academia, government, and business, along with an analysis of a professor's invention and the barriers encountered in transforming the invention into a product. Evaluation consisted of a pre- and post-workshop survey. The workshop was presented to twenty-two participants on November 8 and 9, 2003 at the University of Connecticut School of Dental Medicine and, to refine the presentation further, will be tested at five additional dental schools (University of Pennsylvania, Harvard University, New York University, Nova Southeastern University, and University of Southern California). The results indicated that the workshop's courses would be helpful to the commercialization of inventions. In addition, dental students with experience in basic research expressed an interest in research of projects of use in dental practice. These findings suggest that pursuing research and an academic career might be more appealing if their research was product-oriented.
Technology transfer within the government
NASA Technical Reports Server (NTRS)
Christensen, Carissa Bryce
1992-01-01
The report of a workshop panel concerned with technology transfer within the government is presented. The suggested subtopics for the panel were as follows: (1) transfer from non-NASA U.S. government technology developers to NASA space missions/programs; and (2) transfer from NASA to other U.S. government civil space mission programs. Two presentations were made to the panel: Roles/Value of Early Strategic Planning Within the Space Exploration Initiative (SEI) to Facilitate Later Technology Transfer To and From Industry; and NOAA Satellite Programs and Technology Requirements. The panel discussion addresses the following major issues: DOD/NASA cooperation; alternative mechanisms for interagency communication and interactions; current technology transfer relationships among federal research agencies, and strategies for improving this transfer; technology transfer mechanisms appropriate to intragovernment transfer; the importance of industry as a technology transfer conduit; and measures of merit.
NASA Technical Reports Server (NTRS)
Williams, R. W. (Compiler)
1996-01-01
This conference publication includes various abstracts and presentations given at the 13th Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion and Launch Vehicle Technology held at the George C. Marshall Space Flight Center April 25-27 1995. The purpose of the workshop was to discuss experimental and computational fluid dynamic activities in rocket propulsion and launch vehicles. The workshop was an open meeting for government, industry, and academia. A broad number of topics were discussed including computational fluid dynamic methodology, liquid and solid rocket propulsion, turbomachinery, combustion, heat transfer, and grid generation.
Industry-Wide Workshop on Computational Turbulence Modeling
NASA Technical Reports Server (NTRS)
Shabbir, Aamir (Compiler)
1995-01-01
This publication contains the presentations made at the Industry-Wide Workshop on Computational Turbulence Modeling which took place on October 6-7, 1994. The purpose of the workshop was to initiate the transfer of technology developed at Lewis Research Center to industry and to discuss the current status and the future needs of turbulence models in industrial CFD.
ERIC Educational Resources Information Center
Gormley, Wilma J.; Austin, John H.
1985-01-01
Discusses specific training methods and common characteristics of participants in workshops sponsored by Agency for International Development Water and Sanitation for Health Project for extension agents, who will act as trainers in transfer of sanitation technology in developing nations. Recommendations for conducting such workshops in…
NASA Technical Reports Server (NTRS)
Williams, R. W. (Compiler)
1996-01-01
The purpose of the workshop was to discuss experimental and computational fluid dynamic activities in rocket propulsion and launch vehicles. The workshop was an open meeting for government, industry, and academia. A broad number of topics were discussed including computational fluid dynamic methodology, liquid and solid rocket propulsion, turbomachinery, combustion, heat transfer, and grid generation.
Third NASA Workshop on Wiring for Space Applications
NASA Technical Reports Server (NTRS)
Hammoud, Ahmad (Compiler); Stavnes, Mark (Compiler)
1995-01-01
This workshop addressed key technology issues in the field of electrical power wiring for space applications, and transferred information and technology related to space wiring for use in government and commercial applications. Speakers from space agencies, U.S. Federal labs, industry, and academia presented program overviews and discussed topics on arc tracking phenomena, advancements in insulation materials and constructions, and new wiring system topologies.
ASSESSING AND MANAGING MERCURY FROM HISTORIC AND CURRENT MINING ACTIVITIES
In order for ORD to address uncertainties resulting from past or historical mining practices a technology transfer workshop was conducted in November, 2000 in San Francisco, CA. Two primary objectives for this workshop were: 1) identify state-of-the-science practices and techniqu...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
1988-03-01
February 1986. Kotler , Philip , Bobby J. Calder, Brian Sternthal, and Alice Tybout. "A Marketing Approach to the Development and Dissemination of...intended to cause a particular acquirer, or class of acquirers, to initiate a transfer. In the business world, this operation is called marketing . The... marketing operation and the transfer operation make up the active mode of technology transfer. When operating in the *active mode, the providing
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Applications of Tethers in Space: Workshop Proceedings, Volume 2
NASA Technical Reports Server (NTRS)
Baracat, W. A. (Compiler)
1986-01-01
Topics addressed include: tethered orbital transfer vehicle operations, Centaur and Shuttle tether technology; tethered constellations, gravitational effects; Shuttle continuous open wind tunnel; optimal control laws, electrodynamic tether technology; and space station facilities.
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Kidney Infection (Pyelonephritis)
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
NASA Technical Reports Server (NTRS)
1988-01-01
The Cryogenic Fluid Management Technology Workshop was held April 28 to 30, 1987, at the NASA Lewis Research Center in Cleveland, Ohio. The major objective of the workshop was to identify future NASA needs for technology concerning the management of subcritical cryogenic fluids in the low-gravity space environment. In addition, workshop participants were asked to identify those technologies which will require in-space experimentation and thus are candidates for inclusion in the flight experiment being defined at Lewis. The principal application for advanced fluid management technology is the Space-Based Orbit Transfer Vehicle (SBOTV) and its servicing facility, the On-Orbit Cryogenic Fuel Depot (OOCFD). Other potential applications include the replenishment of cryogenic coolants (with the exception of superfluid helium), reactants, and propellants on board a variety of spacecraft including the space station and space-based weapon systems. The last day was devoted to a roundtable discussion of cryogenic fluid management technology requirements by 30 representatives from NASA, industry, and academia. This volume contains a transcript of the discussion of the eight major technology categories.
Technology 2003: The Fourth National Technology Transfer Conference and Exposition, volume 1
NASA Technical Reports Server (NTRS)
Hackett, Michael (Compiler)
1994-01-01
Proceedings from symposia of the Technology 2003 Conference and Exposition, December 7-9, 1993, Anaheim, CA, was discussed. Volume 1 features the Plenary Session and the Plenary Workshop, plus papers presented in Advanced Manufacturing, Biotechnology/Medical Technology, Environmental Technology, Materials Science, and Power and Energy.
Technology 2001: The Second National Technology Transfer Conference and Exposition, volume 2
NASA Technical Reports Server (NTRS)
1991-01-01
Proceedings of the workshop are presented. The mission of the conference was to transfer advanced technologies developed by the Federal government, its contractors, and other high-tech organizations to U.S. industries for their use in developing new or improved products and processes. Volume two presents papers on the following topics: materials science, robotics, test and measurement, advanced manufacturing, artificial intelligence, biotechnology, electronics, and software engineering.
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
ERCP (Endoscopic Retrograde Cholangiopancreatography)
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Treatment for Diverticular Disease
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Low Blood Glucose (Hypoglycemia)
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Insulin Resistance and Prediabetes
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Penile Curvature (Peyronie's Disease)
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
JPRS Report, Science & Technology. Europe: Economic Competitiveness
1991-02-22
effective technology transfer, • workshops aimed at potential marketing, • actions to promote synergistic effects with cross- fertilization of...the syncytial virus; treatment of sexually-transmissible diseases, such as prevention of recidivous vulvovaginal candidiases ; and parasitological
Multiple Endocrine Neoplasia Type I
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Definition and Facts for Constipation
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Interstitial Cystitis / Painful Bladder Syndrome
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Anemia in Chronic Kidney Disease
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Symptoms and Causes of Constipation
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Nonalcoholic Fatty Liver Disease & NASH
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Prostatitis: Inflammation of the Prostate
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Treatment for Constipation in Children
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Pain Medicines and Kidney Damage
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Smoking and Your Digestive System
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Treatment for Irritable Bowel Syndrome
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
NASA Technical Reports Server (NTRS)
1975-01-01
The data processing and transfer technology areas that need to be developed and that could benefit from space flight experiments are identified. Factors considered include: user requirements, concepts in 'Outlook for Space', and cost reduction. Major program thrusts formulated are an increase in end-to-end information handling and a reduction in life cycle costs.
The Role of Problem Specification Workshops in Extension: An IPM Example.
ERIC Educational Resources Information Center
Foster, John; And Others
1995-01-01
Of three extension models--top-down technology transfer, farmers-first approach, and participatory research--the latter extends elements of the other two into a more comprehensive analysis of a problem and specification of solution strategies. An Australian integrated pest management (IPM) example illustrates how structured workshops are a useful…
USEPA OFFICE OF RESERCH AND DEVELOPMENT TECHNOLOGY TRANSFER ACTIVITIES ON MERCURY RESEARCH
Two meet USEP A mercury research strategy goals, five mercury workshops were held in the U.S. The two overall objectives governing the proceedings of these workshops were:
.identifY state-of-tbe-science practices and techniques for reducing the use of mercury at its source...
Primary Biliary Cholangitis (Primary Biliary Cirrhosis)
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Symptoms and Causes of Celiac Disease
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Urinary Tract Infections (UTIs) in Children
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Dental Enamel Defects and Celiac Disease
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Acid Reflux (GER & GERD) in Infants
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Urinary Tract and How It Works
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Treatment Methods for Kidney Failure: Peritoneal Dialysis
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Definition and Facts for Irritable Bowel Syndrome
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Dermatitis Herpetiformis: Skin Manifestation of Celiac Disease
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
How Do Doctors Treat NAFLD and NASH?
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Diabetes, Gum Disease, and Other Dental Problems
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Definition and Facts for Constipation in Children
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Bladder Control Problems and Bedwetting in Children
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Definition and Facts for Peptic Ulcers (Stomach Ulcers)
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Nutrition for Early Chronic Kidney Disease in Adults
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
What are the symptoms of NAFLD and NASH?
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Eating, Diet, and Nutrition for Irritable Bowel Syndrome
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
NASA/BLM Applications Pilot Test (APT), phase 2. Volume 3: Technology transfer
NASA Technical Reports Server (NTRS)
1981-01-01
Techniques used and materials presented at a planning session and two workshops held to provide hands-on training in the integration of quantitatively based remote sensing data are described as well as methods used to enhance understanding of approaches to inventories that integrate multiple data sources given various resource information objectives. Significant results from each of the technology transfer sessions are examined.
... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive Diseases Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Primary Sclerosing Cholangitis
... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive Diseases Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Gastrointestinal (GI) Bleeding
... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive Diseases Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
DOT National Transportation Integrated Search
2015-12-01
This technology transfer workshop presented transportation planners in the public and private sectors with two successful and closely related studies, conducted respectively by Morgan State University and the University of Virginia. The first module ...
Nerve Damage (Diabetic Neuropathies)
... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive Diseases Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Hepatitis B: What Asian and Pacific Islander Americans Need to Know
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
How Can My Diet Help Prevent or Treat NAFLD and NASH?
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Unstructured Grid Generation Techniques and Software
NASA Technical Reports Server (NTRS)
Posenau, Mary-Anne K. (Editor)
1993-01-01
The Workshop on Unstructured Grid Generation Techniques and Software was conducted for NASA to assess its unstructured grid activities, improve the coordination among NASA centers, and promote technology transfer to industry. The proceedings represent contributions from Ames, Langley, and Lewis Research Centers, and the Johnson and Marshall Space Flight Centers. This report is a compilation of the presentations made at the workshop.
Fly-By-Light/Power-By-Wire Requirements and Technology Workshop
NASA Technical Reports Server (NTRS)
Baker, Robert L. (Editor); Pitts, Felix L. (Editor)
1992-01-01
The results of the Fly-By-Light/Power-By-Wire (FBL/PBW) Workshop held on March 17-19, 1992, at the NASA Langley Research Center are presented. The FBL/PBW program is a joint NASA LeRC/LaRC effort to develop the technology base for confident application of integrated FBL/PBW systems to transport aircraft. The objectives of the workshop were to ascertain the FBL/PBW program technical requirements and satisfy the requirements and needs from the industry viewpoint, provide a forum for presenting and documenting alternative technical approaches which satisfy the requirements, and assess the plan adequacy in accomplishing plan objectives, aims, and technology transfer. Areas addressed were: optical sensor systems, power-by-wire systems, FBL/PBW fault-tolerant architectures, electromagnetic environment assessment, and system integration and demonstration. The workshop consisted of an introductory meeting, a 'keynote' presentation, a series of individual panel sessions covering the above areas, with midway presentations by the panel chairpersons, followed by a final summarizing/integrating session by the individual panels, and a closing plenary session summarizing the results of the workshop.
... Electromyography . Electromyography uses special sensors to measure the electrical activity of the muscles and nerves in and ... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Regional coordination workshops.
DOT National Transportation Integrated Search
2008-10-01
There is a demonstrated need for outreach, education, training and technology transfer to public : transportation providers, rural transit districts, mobility managers, councils of governments and staff : involved in regional human service transit co...
Solar energy and conservation technologies for Caribbean Tourist Facilities (CTF)
NASA Astrophysics Data System (ADS)
The primary objectives of the Caribbean Tourist Facilities (CTF) project were to develop and publish materials and conduct workshops on solar energy and conservation technologies that would directly address the needs and interests of tourist facilities in the Caribbean basin. Past contacts with the Caribbean and US tourist industries indicated that decision-makers remained unconvinced that renewable technologies could have a significant impact on development and operation costs or that renewable energy products and services suited their needs. In order to assure that the materials and programs developed were responsive to the Caribbean tourist industry and U.S. conservation and renewable energy industries, marketing research with potential end users and the organizations and associations that serve those users was included as an underlying task in the project. The tasks outlined in the CTF Statement of Work included conference planning, gathering of field data, development of educational materials, and conduct of workshop(s). In addition to providing a chronicle of the fulfillment of those tasks, this final report includes suggestions for distributing the documents developed during the project, venues for future workshops, and other technology transfer and market influence strategies.
Symptoms and Causes of Irritable Bowel Syndrome
... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive Diseases Kidney Disease Weight Management Liver Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Workshop on Wildlife Crime: An Interdisciplinary Perspective
2015-01-01
12211 Research Triangle Park, NC 27709-2211 Wildlife crime, computation, conservation, criminology , conservation biology, risk, poaching REPORT...Action items? Conference on “Conservation, Computation, Criminology ” C^3? Technology Transfer
Monogenic Forms of Diabetes: Neonatal Diabetes Mellitus and Maturity-Onset Diabetes of the Young
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Overweight and Obesity Statistics
... gov . Resources Additional Reading from the NIDDK Weight Management: information from NIDDK about overweight and obesity, healthy eating, ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
... Process Research Training & Career Development Funded Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... diet, and nutrition . References [3] U.S. Department of Agriculture and U.S. Department of Health and Human Services. ... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
... Take Charge of Your Health View More Weight Management Information National Center on Health, Physical Activity and Disability ( ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...
Proceedings of the 1997 oil heat technology conference and workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
McDonald, R.J.
1997-09-01
This report documents the Proceedings of the 1997 Oil Heat Technology Conference and Workshop, held on April 3--4 at Brookhaven National Laboratory (BNL), and sponsored by the US Department of Energy--Office of Building Technologies, State and Community programs (DOE-BTS), in cooperation with the Petroleum Marketers Association of America (PMAA). This Conference is a key technology transfer activity supported by the ongoing Combustion Equipment Technology (Oil-Heat R and D) program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference weremore » to: identify and evaluate the state-of-the-art and recommend new initiatives for higher efficiency, a cleaner environment, and to satisfy consumer needs cost-effectively, reliably, and safely: and foster cooperation among federal and industrial representatives with the common goal of sustained national economic growth and energy security via energy conservation. The 1997 Oil Technology Conference comprised: (a) five plenary sessions devoted to presentations and summations by public and private sector industry representatives from the US, and Canada, and (b) four workshops which focused on mainstream issues in oil-heating technology. This book contains 14 technical papers and four summaries from the workshops. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.« less
Targeted Technology Transfer to US Independents
DOE Office of Scientific and Technical Information (OSTI.GOV)
Donald F. Duttlinger; E. Lance Cole
2006-09-29
The Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers in 1994 as a national not-for-profit organization to address the increasingly urgent need to improve the technology-transfer process in the U.S. upstream petroleum industry. Coordinated from a Headquarters (HQ) office in Houston, PTTC maintains an active grassroots program executed by 10 Regional Lead Organizations (RLOs) and two satellite offices (Figure 1). Regional Directors interact with domestic oil and gas producers through technology workshops, resource centers, websites, newsletters, technical publications and cooperative outreach efforts. HQ facilitates inter-regional technology transfer and implements a comprehensive communications program.more » Active volunteers on the National Board and in Producer Advisory Groups (PAGs) in each of the 10 regions focus effort in areas that will create the most impact for domestic producers. Focused effort by dedicated individuals across the country has enabled PTTC to achieve the milestones outlined in Appendix A.« less
Targeted Technology Transfer to US Independents
DOE Office of Scientific and Technical Information (OSTI.GOV)
Schatzinger, Viola; Chapman, Kathy; Lovendahl, Kristi
The Petroleum Technology Transfer Council (PTTC) is a unique not-for-profit network that focuses on transferring Exploration and Production (E&P) technology to the domestic oil and natural gas producing industry. PTTC connects producers, technology providers and innovators, academia, research and development (R&D) consortiums and governments. Local affordable workshops delivered by Regional Lead Organizations (RLOs), which are typically a university or geological survey, are a primary tool. PTTC also maintains a website network, issues a national newsletter, provides a column in a major trade publication, and exhibits at major industry events. It also encourages industry to ask technology-related questions, striving to findmore » relevant answers that will save questioners significant time. Working since late 1993, the PTTC network has a proven track record of providing industry with technology insights they can apply. Volunteers at the regional and national level provide key guidance regarding where to focus technical effort and help connect PTTC with industry. At historical funding levels, PTTC had been able to hold well more than 100 workshops per year, drawing 6,000+ attendees. As funding decreased in the early 2000s, the level of activity decreased and PTTC sought a merger with the American Association of Petroleum Geologists (AAPG), becoming an AAPG-managed organization at the start of FY08. This relationship with AAPG was terminated by mutual consent in May 2011 and PTTC once again operates independently. Chris Hall, California continued to serve as Chairman of the Board of Directors until December 2013. At the time PTTC reorganized into a RLO led organization with Mary Carr and Jeremy Viscomi as co-Executive Directors. Jerry Anderson became the Chairman of the PTTC Board of Directors and Chris Hall continues to serve on the Board. Workshop activity stabilized at 55-65 workshops per year averaging 3,100 attendees. FY14 represented the fifth year in a multi-year contract with the Department of Energy (DOE) for providing technology transfer services. This report summarizes activity and results during for five years, FY10 through FY14. In FY12 changes occurred in responsibilities of consultants serving HQ, because funding was reduced below the threshold level of $500,000 audits were no longer required and consultant time was reduced on the primary contract. Contracts for Permian Carbon Capture Utilization and Storage (CCUS) training, and providing tech transfer services to the Research Partnership to Secure Energy for America (RPSEA) provided work that enabled HQ to retain services of regular consultants. Both CCUS and RPSEA were five year contracts with PTTC, and providing services for these DOE funded contracts provided synergy for PTTC and the oil and gas industry. With further decreases in DOE funding the regions conducted workshops with no PTTC funding starting in June FY11. Since 2011 the number of workshops has declined from 79 in FY10 and FY11 to 49 in FY12, and risen to 54 in FY13 and 63 in FY14. The attendee's numbers dipped slightly below 3,000 per year in FY 10, FY12, and FY13, but rose to over 3,800 in FY 11 and 3105 in FY14. Quantitative accomplishments: PTTC has maintained its unique structure of a national organization working through Regional Lead Organizations (RLOs) to deliver local, affordable workshops. During the contract period PTTC consolidated from 10 to five regions to increase efficiency, and because no active RLO's would be maintained in the Central and Eastern Gulf Coast regions. RLO's for the regions are located at: Eastern - West Virginia University, (Illinois Geol. Survey., W. Michigan Univ. FY10-12); Midwest created in FY13 - Illinois Geological Survey, W. Michigan University; Midcontinent - University of Kansas, expanded to Houston, TX (2013-14); Rocky Mountain - Colorado School of Mines; Texas/SE New Mexico (FY10-FY11) - Bureau of Economic Geology, Univ. of Texas at Austin; West Coast - Conservation Committee of California O&G Producers.« less
Freeway bottleneck removals : workshop enhancement and technology transfer.
DOT National Transportation Integrated Search
2009-12-01
As transportation improvement projects become increasingly costly and complex and as funding sources are not : keeping pace with needs in highly urbanized areas, it becomes critical that existing freeway systems be finetuned to : maximize capacity...
Eating, Diet, and Nutrition for Constipation
... some microwavable dinners References [4] U.S. Department of Agriculture and U.S. Department of Health and Human Services. ... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Coastal Inlets Research Program
2014-04-01
PCs to evaluate inlets, channels, structures, adjacent beaches dredging and placement within, regional systems . Transfer technology and...Coastal Modeling or o o Management System (CMS) Alex Sanchez Ned MitchellCIRP Honghai Li Waves at Research & Development Geomorphic Evolution T B k...channel infilling Aug 2005 Baltimore, MD Inlet Modeling System technology transfer workshop #7 – FSBPA, Jan/Feb 2006 Sarasota, FL Modeling of waves
Argonne National Laboratory technology transfer report, FY 1987
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1987-11-01
In 1985 Argonne established the Technology Transfer Center (TTC). As of the end of FY 1987, the TTC has a staff equivalent to four full-time professionals, two secretaries, and two student aides; FY 1987 ORTA funding was $220K. A network of technology transfer representatives provides windows into and out of Argonne's technical divisions on technology transfer matters. The TTC works very closely with the ARCH Develoment Corporation, a not-for-profit corporation set up to commercialize selected Argonne and University of Chicago patents. The goal of the Technology Transfer Center at Argonne is to transfer technology developed at Argonne to the domesticmore » private sector by whatever means is most effective. The strategies by which this is accomplished are numerous and the TTC is, in effect, conducting a number of experiments to determine the most effective strategies. These include cooperative RandD agreements, work-for-others contracts, subcontracting to industry, formation of joint ventures via ARCH, residencies by industry staff at Argonne and vice versa, patent licensing and, of course, conferences, workshops and visits by industry and to industry.« less
FY05 Targeted Technology Transfer to US Independents
DOE Office of Scientific and Technical Information (OSTI.GOV)
Donald F. Duttlinger; E. Lance Cole
2005-11-01
Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers in 1994 as a national not-for-profit organization to address the increasingly urgent need to improve the technology-transfer process in the U.S. upstream petroleum industry. PTTC's technology-transfer programs enhance U.S. national security. PTTC administers the only nation-wide, comprehensive program dedicated to maximizing America's supplies of domestic oil and gas. PTTC conducts grassroots programs through 10 Regional Lead Organizations (RLOs) and two satellite offices, leveraging their preexisting connections with industry. This organizational structure helps bring researchers and academia to the table. Nationally and regionally, volunteers within amore » National Board and Regional Producer Advisory Groups guide efforts. The National Board meets three times per year, an important function being approving the annual plans and budgets developed by the regions and Headquarters (HQ). Between Board meetings, an active Management and Budget Committee guide HQ activity. PTTC itself undergoes a thorough financial audit each year. The PTTC's HQ staff plans and manages all aspects of the PTTC program, conducts nation-wide technology-transfer activities, and implements a comprehensive communications program. Networking, involvement in technical activities, and an active exhibit schedule are increasing PTTC's sphere of influence with both producers and the oilfield service sector. Circulation for ''PTTC Network News'', the quarterly newsletter, has risen to nearly 17,500. About 7,500 people receive an email Technology Alert on an approximate three-week frequency. Case studies in the ''Petroleum Technology Digest in World Oil'' appear monthly, as do ''Tech Connections'' columns in ''The American Oil and Gas Reporter''. As part of its oversight responsibility for the regions, the PTTC from the start has captured and reported data that document the myriad ways its programs impact industry. Of 119 workshops in FY05 where repeat attendance was reported, 59 percent of attendees on average had attended a PTTC event previously, indicating that a majority felt they were receiving enough value to come back. It also is encouraging that, after 11 years, PTTC events continue to attract new people. The form used at workshops to get participants feedback asks for a ''yes'' or ''no'' response to the question: ''Have you used any new technologies based on knowledge gained through PTTC?'' With data now available from 611 workshops, 41 percent of respondents said, ''yes'', confirming that people are applying the information they receive at PTTC workshops. PTTC in FY04 asked RLO directors, oilfield service companies and producers in 11 areas with significant technological barriers to adding new reserves to estimate the ''PTTC Impact Factor''--that is, the percentage of the total reserves added in their areas that logically could be attributed to PTTC's efforts. Of the estimated 1,266 million barrels of oil equivalent (BOE) added in the 11 areas, participants estimated that roughly 88 million BOE had been added as a result of PTTC's techtransfer efforts. PTTC's 10 regions are the primary delivery mechanism for technology transfer. Attendance at PTTC regional activities set a record in FY05, with 8,900 individuals attending 154 workshops, lunch-and-learn events, or student training and internships. When appropriate, regional workshops incorporate R&D findings from DOE-funded projects. This year HQ began a ''Microhole Technology Integration'' Initiative with DOE to more clearly present their microhole program to producers. Often events are held cooperatively with other national organizations, regional producer associations and professional society groups. This practice leverages outreach and engenders future cooperation. Of the more than 61,000 individuals PTTC has attracted to its events since its inception, more than 15,000 have attended in the past two years. Eight-eight percent of PTTC event attendees during FY05 were from industry. The number of contacts and inquiries received by PTTC HQ and regional offices from individuals outside the PTTC network were up 19 percent, reaching a new high in FY05 of more than 30,000 for the first time.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The primary objectives of the Caribbean Tourist Facilities (CTF) project were to develop and publish materials and conduct workshops on solar energy and conservation technologies that would directly address the needs and interests of tourist facilities in the Caribbean basin. Past contacts with the Caribbean and US tourist industries indicated that decision-makers remained unconvinced that renewable technologies could have a significant impact on development and operation costs or that renewable energy products and services suited their needs. In order to assure that the materials and programs developed were responsive to the Caribbean tourist industry and US conservation and renewable energymore » industries, marketing research with potential end users and the organizations and associations that serve those users was included as an underlying task in the project. The tasks outlined in the CTF Statement of Work included conference planning, gathering of field data, development of educational materials, and conduct of workshop(s). In addition to providing a chronicle of the fulfillment of those tasks, this final report includes suggestions for distributing the documents developed during the project, venues for future workshops, and other technology transfer and market influence strategies. 3 refs.« less
1996 DOE technical standards program workshop: Proceedings
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1996-07-01
The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less
Know Your Blood Sugar Numbers: Use Them to Manage Your Diabetes
... be healthy today and in the future. John's Story At each visit, John and his health care ... Grants & Grant History Research Resources Research at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information Diabetes Digestive ...
Sharing values, sharing a vision
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1993-12-31
Teamwork, partnership and shared values emerged as recurring themes at the Third Technology Transfer/Communications Conference. The program drew about 100 participants who sat through a packed two days to find ways for their laboratories and facilities to better help American business and the economy. Co-hosts were the Lawrence Livermore National Laboratory and the Lawrence Berkeley Laboratory, where most meetings took place. The conference followed traditions established at the First Technology Transfer/Communications Conference, conceived of and hosted by the Pacific Northwest Laboratory in May 1992 in Richmond, Washington, and the second conference, hosted by the National Renewable Energy Laboratory in Januarymore » 1993 in Golden, Colorado. As at the other conferences, participants at the third session represented the fields of technology transfer, public affairs and communications. They came from Department of Energy headquarters and DOE offices, laboratories and production facilities. Continued in this report are keynote address; panel discussion; workshops; and presentations in technology transfer.« less
Proceedings of the 1991 Oil Heat Technology Conference and Workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
McDonald, R.J.
This Conference, which was the sixth held since 1984, is a key technology-transfer activity supported by the ongoing Combustion Equipment Technology program at BNL, and is aimed at providing a forum for the exchange of information among international researchers, engineers, manufacturers, and marketers of oil-fired space-conditioning equipment. The objectives of the Conference were to: Identify and evaluate the state-of-the-art and recommend; new initiatives to satisfy consumer needs cost-effectively, reliably, and safely; Foster cooperation among federal and industrial representatives with the common goal of national security via energy conservation. The 1991 Oil Technology Conference comprised: (a) two plenary sessions devoted tomore » presentations and summations by public and private sector representatives from the United States, Europe, and Canada; and, (b) four workshops which focused on mainstream issues in oil-heating technology. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.« less
Program Model Checking as a New Trend
NASA Technical Reports Server (NTRS)
Havelund, Klaus; Visser, Willem; Clancy, Daniel (Technical Monitor)
2002-01-01
This paper introduces a special section of STTT (International Journal on Software Tools for Technology Transfer) containing a selection of papers that were presented at the 7th International SPIN workshop, Stanford, August 30 - September 1, 2000. The workshop was named SPIN Model Checking and Software Verification, with an emphasis on model checking of programs. The paper outlines the motivation for stressing software verification, rather than only design and model verification, by presenting the work done in the Automated Software Engineering group at NASA Ames Research Center within the last 5 years. This includes work in software model checking, testing like technologies and static analysis.
NASA's southeast technology transfer alliance: A cooperative technology assistance initiative
NASA Astrophysics Data System (ADS)
Craft, Harry G.; Sheehan, William; Johnson, Anne
1996-03-01
Since 1958, NASA has been charged with actively assisting in the transfer of technologies derived from the United States space program into the industrial sector of the U.S. economy. This has historically been accomplished through technology transfer offices working independently at each NASA field center. NASA recently restructured the program to provide regional coordination, maximize efficiencies, eliminate redundancies, and capitalize on each center's fundamental technology strengths. The nation is divided into six NASA technology transfer geographical regions with each region containing one or more NASA field centers and a regional technology transfer center. The southeast region includes the states of Alabama, Arkansas, Florida, Georgia, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, and Tennessee. The NASA field centers in this region are: the Marshall Space Flight Center in Huntsville, Alabama; the Kennedy Space Center in Florida; and the Stennis Space Center in Bay St. Louis, Mississippi. The centers have teamed to focus primarily on regional industries and businesses, to provide a wide range of resources for U.S. industries, including access to unique government facilities, regional workshops, and technical problem solving. Hundreds of American businesses have benefited from this new regional initiative, as evidenced by reports of over 10,500 added or saved jobs and over 988 million worth of economic impacts as a result of their technology transfer activities.
Tropical medicine: Telecommunications and technology transfer
NASA Technical Reports Server (NTRS)
Legters, Llewellyn J.
1991-01-01
The potential for global outbreaks of tropical infectious diseases, and our ability to identify and respond to such outbreaks is a major concern. Rapid, efficient telecommunications is viewed as part of the solution to this set of problems - the means to link a network of epidemiological field stations via satellite with U.S. academic institutions and government agencies, for purposes of research, training in tropical medicine, and observation of and response to epidemic emergencies. At a workshop, telecommunications and technology transfer were addressed and applications of telecommunications technology in long-distance consultation, teaching and disaster relief were demonstrated. Applications in teaching and consultation in tropical infectious diseases is discussed.
Proceedings of the Department of Defense Environmental Technology Workshop
1995-05-01
Fabrication Laboratory Results in Waste Elimination William J. Kelso, Parsons Engineering Science, Inc.; Susan H. Errett, Lt. Col. Ronald D. Fancher... Williams , Ocean City Research Corporation ......................... 109 NDCEE Reduces Risk in Technology Transfer Jack H. Cavanaugh, Concurrent...Ecological Receptors William R. Alsop, Mark E. Stelljes, Elizabeth T. Hawkins, Harding Lawson Associates; W illiam Collins, U.S. Department of the Army
Contains the proceedings for the 1992 Association of Environmental and Resource Economists Workshop on benefits transfer. At the workshop, three formal papers on benefit transfer issues and six benefits transfer study protocols were presented.
LANDSAT information for state planning
NASA Technical Reports Server (NTRS)
Faust, N. L.; Spann, G. W.
1977-01-01
The transfer of remote sensing technology for the digital processing of LANDSAT data to state and local agencies in Georgia and other southeastern states is discussed. The project consists of a series of workshops, seminars, and demonstration efforts, and transfer of NASA-developed hardware concepts and computer software to state agencies. Throughout the multi-year effort, digital processing techniques have been emphasized classification algorithms. Software for LANDSAT data rectification and processing have been developed and/or transferred. A hardware system is available at EES (engineering experiment station) to allow user interactive processing of LANDSAT data. Seminars and workshops emphasize the digital approach to LANDSAT data utilization and the system improvements scheduled for LANDSATs C and D. Results of the project indicate a substantially increased awareness of the utility of digital LANDSAT processing techniques among the agencies contracted throughout the southeast. In Georgia, several agencies have jointly funded a program to map the entire state using digitally processed LANDSAT data.
NASA Technical Reports Server (NTRS)
Schulbach, Catherine H. (Editor)
2000-01-01
The purpose of the CAS workshop is to bring together NASA's scientists and engineers and their counterparts in industry, other government agencies, and academia working in the Computational Aerosciences and related fields. This workshop is part of the technology transfer plan of the NASA High Performance Computing and Communications (HPCC) Program. Specific objectives of the CAS workshop are to: (1) communicate the goals and objectives of HPCC and CAS, (2) promote and disseminate CAS technology within the appropriate technical communities, including NASA, industry, academia, and other government labs, (3) help promote synergy among CAS and other HPCC scientists, and (4) permit feedback from peer researchers on issues facing High Performance Computing in general and the CAS project in particular. This year we had a number of exciting presentations in the traditional aeronautics, aerospace sciences, and high-end computing areas and in the less familiar (to many of us affiliated with CAS) earth science, space science, and revolutionary computing areas. Presentations of more than 40 high quality papers were organized into ten sessions and presented over the three-day workshop. The proceedings are organized here for easy access: by author, title and topic.
Workshop: Benefits Transfer Workshop Proceedings (2005)
The objective of the workshop was to provide a forum for informed discussion regarding the practice of benefits transfer, the use of valuation databases for such, and the general relevance of valuation and benefits transfer to environmental decision making
Science for Society Workshop Summary Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wolfe, Amy K; Bjornstad, David J; Lenhardt, W Christopher
Science for Society, a workshop held at the Oak Ridge National Laboratory (ORNL) on September 27, 20111, explored ways to move Laboratory science toward use. It sought actionable recommendations. Thus the workshop focused on: (1) current practices that promote and inhibit the translation of science into use, (2) principles that could lead to improving ORNL's translational knowledge and technology transfer efforts, and (3) specific recommendations for making these principles operational. This highly interactive workshop struck a positive chord with participants, a group of 26 ORNL staff members from diverse arenas of science and technology (S and T), technology transfer, andmore » external laboratory relations, who represented all levels of science, technology, and management. Recognizing that the transformation of fundamental principles into operational practices often follows a jagged path, the workshop sought to identify key choices that could lead to a smoother journey along this path, as well as choices that created roadblocks and bottlenecks. The workshop emphasized a portion of this pathway, largely excluding the marketplace. Participants noted that research translation includes linkages between fundamental and applied research and development (R and D), and is not restricted to uptake by manufacturers, consumers, or end users. Three crosscutting ideas encapsulate workshop participants observations: (1) ORNL should take more action to usher the translation of its S and T products toward use, so as to make a positive national and global impact and to enhance its own competitiveness in the future; (2) ORNL (and external entities such as DOE and Congress) conveys inconsistent messages with regard to the importance of research translation and application, which (a) creates confusion, (b) poses disincentives to pursue research translation, (c) imposes barriers that inhibit cross-fertilization and collaboration, and (d) diminishes the effectiveness of both the science mission and the translation of that science for use; and (3) ORNL should design its commitments and actions for helping move science from the Laboratory toward use to align with one another and should integrate them into its institutional culture in such a way as to elevate research translation and application to coequal status with scientific excellence. Participants made several actionable recommendations for enhancing research translation at ORNL, some of which were particular to specific S and T domains. Among the recommendations that participants agreed apply Lab-wide are to: align metrics and incentives with research translation goals; manage risks and conflicts of interest instead of avoiding them; and create programs (e.g., entrepreneurial leave) that promote interactions between key ORNL staff and industry in ways that complement careers at ORNL.« less
Workshop on "New Engineering Technology Transfer in Orthopaedic Surgery".
1999-04-01
anatomy is required to remain oriented to the tunnel -view of the arthroscope as is the ability to triangulate the instruments through proprioception...required. Methods: Eight limbs from fresh, whole cadavers were used. Motion data were collected with the OPTOTRAK infrared motion analysis system
DOT National Transportation Integrated Search
2016-01-01
Members of the Peer Exchange Team identified actions Alaska should consider to : improve effectiveness of the research program: : 1. Conduct Research Strategic Visioning Workshop with Staff and Research : Advisory Board in Fall, 2016 : 2. Develop a T...
Tenth workshop on seedling physiology and growth problems in oak plantings
Brian R. Lockhart; Emile S. Gardiner; Daniel C. (editors) Dey
2008-01-01
The University of Tennesseeâs Tree Improvement Program is in its 49th year of conducting researchand technology transfer activities with a special emphasis on hardwood species, particularlyoak (Quercus spp.). Programs have included seed orchard construction and development, nurserystudies, silviculture...
Targeted Technology Transfer to US Independents
DOE Office of Scientific and Technical Information (OSTI.GOV)
E. Lance Cole
2009-09-30
The Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers, working in conjunction with the Independent Petroleum Association of America (IPAA), the U.S. Department of Energy (DOE) and selected universities, in 1994 as a national not-for-profit organization. Its goal is to transfer Exploration and Production (E&P) technology to the domestic upstream petroleum industry, in particular to the small independent operators. PTTC connects producers, technology providers and innovators, academia, and university/industry/government research and development (R&D) groups. From inception PTTC has received federal funding through DOE's oil and natural gas program managed by the National Energymore » Technology Laboratory (NETL). With higher funding available in its early years, PTTC was able to deliver well more than 100 workshops per year, drawing 6,000 or more attendees per year. Facing the reality of little or no federal funding in the 2006-2007 time frame, PTTC and the American Association of Petroleum Geologists (AAPG) worked together for PTTC to become a subsidiary organization of AAPG. This change brings additional organizational and financial resources to bear for PTTC's benefit. PTTC has now been 'powered by AAPG' for two full fiscal years. There is a clear sense that PTTC has stabilized and is strengthening its regional workshop and national technology transfer programs and is becoming more entrepreneurial in exploring technology transfer opportunities beyond its primary DOE contract. Quantitative accomplishments: PTTC has maintained its unique structure of a national organization working through Regional Lead Organizations (RLOs) to deliver local, affordable workshops. During the contract period PTTC consolidated from 10 to six regions efficiency and alignment with AAPG sections. The number of workshops delivered by its RLOs during the contract period is shown below. Combined attendance over the period was approximately 32,000, 70% of whom were repeat attendees. Participant feedback established that 40% of them said they had applied a technology they learned of through PTTC. Central/Eastern Gulf Univ. of Alabama, LSU Center for Energy Studies 77 Eastern West Virginia University, Illinois Geological Survey, W. Michigan Univ. 99 Midcontinent University of Kansas, University of Tulsa, Okla. Geological Survey (past) 123 Rocky Mountains Colorado School of Mines 147 Texas/SE New Mexico Bureau of Economic Geology, U. of Texas at Austin 85 West Coast Conservation Committee of California O&G Producers, Univ. So. Cal. (past) 54 At the national level HQ went from an office in Houston to a virtual office in the Tulsa, Okla. area with AAPG providing any physical assets required. There are no employees, rather several full time and several part time contractors. Since inception, PTTC has produced quarterly and mailed the 16-page Network News newsletter. It highlights new advances in technology and has a circulation of 19,000. It also produces the Tech Connections Column in The American Oil & Gas Reporter, with a circulation of 13,000. On an approximate three-week frequency, the electronic Email Tech Alert goes out to 9,000 readers. The national staff also maintains a central website with information of national interest and individual sections for each of the six regions. The national organization also provides legal and accounting services, coordinates the RLO activities, exhibits at at least major national and other meetings, supports the volunteer Board as it provides strategic direction, and is working to restore the Producer Advisory Groups to bolster the regional presence. Qualitative Value: Three qualitative factors confirm PTTC's value to the domestic O&G producing industry. First, AAPG was willing to step in and rescue PTTC, believing it was of significant interest to its domestic membership and of potential value internationally. Second, through a period of turmoil and now with participant fees dramatically increased, industry participants 'keep coming back' to workshop activities. Third, technology developers seek out PTTC for exposure for their developing technologies, and many industry organizations/groups seek out PTTC for promotion of their meetings or events. A quantitative impact analysis performed in 2005 also attributed measurable reserves from PTTC's work.« less
Knowledge Transfer Project: Cultivating Smart Energy Solutions through Dynamic Peer-to-Peer Learning
DOE Office of Scientific and Technical Information (OSTI.GOV)
As energy policy makers and professionals convene in the Oresund region for the 9th Annual Clean Energy Ministerial (CEM9), the global community is as united as ever around the common goal of accelerating the transition to global clean energy. Through sustained collective effort and thought leadership, CEM partners and stakeholders are systematically addressing the barriers to the widescale deployment of clean energy technologies. Pivotal to their progress is the efficient sharing and dissemination of knowledge. To address that need, the CEM-initiative International SmartGrid Action Network (ISGAN) launched the Knowledge Transfer Project (KTP) in March 2016 to capture, collect, and sharemore » knowledge about smart grid technologies among countries and key stakeholders. Building on ISGAN's experience with delivering deep-dive workshops, the KTP fosters meaningful international dialogue on smart grids with a focus on developing competence and building capacity. After a successful 2016 pilot project and two consecutive projects, each with a different focus and structure, the KTP has become an established practice that can support existing ISGAN or CEM initiatives. To accommodate different purposes, needs, and practical circumstances, ISGAN has adopted three basic models for delivering KTP workshops: Country-Centric, Multilateral, and Hybrid. This fact sheet describes each approach through case studies of workshops in Mexico, India, and Belgium, and invites new ideas and partners for future KTPs.« less
Communicating old-growth forest management on the Allegheny National Forest
Brad Nelson; Chris Nowak; Dave deCalesta; Steve Wingate
1997-01-01
Successful communication of old-growth management, including the role of silviculture, is achieved by integrating as a working whole the topics addressed in this workshop. We have used research, technology transfer and adaptive management to achieve this integration on the Allegheny National Forest. Program success depends on scientists and practitioners working...
University Research and Technology Transfer in a Changing World.
ERIC Educational Resources Information Center
National Association of State Universities and Land Grant Colleges, Washington, DC.
This document derives from a workshop that brought together members of the Council on Research Policy and Graduate Education to discuss models of administrative and support structures to provide a range of services that promoted the goals of faculty, students, and other university employees in research and entrepreneurial activities. Following the…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Appleton, B.R.; Bauer, G.S.
1996-06-01
The International Workshop on the Technology and Thermal Hydraulics of Heavy Liquid Metals (Schruns Workshop) was organized to assess the R&D and technology problems associated with designing and building a heavy liquid metal target for a spallation neutron source. The European scientific community is completing a feasibility study for a future, accelerator-based, pulsed spallation neutron source that would deliver a beam power of 5 megawatts (MW) to a target. They have concluded that a liquid metal target is preferable to conventional solid targets for handling the extreme radiation environments, high heat loads, and pulsed power. Similarly, the ORNL has beenmore » funded by the DOE to design a high-power, pulsed spallation neutron source that would begin operation at about 1 MW but that could be upgraded to significantly higher powers in the future. Again, the most feasible target design appears to be a liquid metal target. Since the expertise needed to consider these problems resides in a number of disparate disciplines not normally covered by existing conferences, this workshop was organized to bring a small number of scientists and engineers together to assess the opportunities for building such a target. The objectives and goals of the Schruns Workshop were to: review and share existing information on the science and technology of heavy liquid metal systems. Evaluate the opportunities and limitations of materials compatibility, thermal hydraulics and heat transfer, chemical reactions, corrosion, radiation effects, liquid-gas mixtures, systems designs, and circuit components for a heavy liquid metal target. Establish the critical R & D and technology that is necessary to construct a liquid metal target. Explore opportunities for cooperative R & D among members of the international community that could expedite results, and share expertise and resources. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.« less
TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Unknown
1998-10-31
In pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions, the Petroleum Technology Transfer Council (PTTC) functions as a cohesive national organization that implements industry's directives through active regional programs. The role of the national headquarters (HQ) organization includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. PTTC relies on 10 Regional Lead Organizations (RLOs) as its main program delivery mechanism to industry. Through its regions, PTTC connects with independent oil and gas producers--through technology workshops, resources centers, websites, newsletters, and other outreach efforts.more » The organization effectively combines federal, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies. This technical progress report summarizes PTTC's accomplishments during FY98, and its strategy for achieving further growth in the future.« less
Minnowbrook V: 2006 Workshop on Unsteady Flows in Turbomachinery
NASA Technical Reports Server (NTRS)
LaGraff, John E.; Ashpis, David E.; Oldfield, Martin L. G.; Gostelow, J. Paul
2006-01-01
This CD-ROM contain materials presented at the Minnowbrook V 2006 Workshop on Unsteady Flows in Turbomachinery, held at the Syracuse University Minnowbrook Conference Center, New York, on August 20-23, 2006. The workshop organizers were John E. LaGraff (Syracuse University), Martin L.G. Oldfield (Oxford University), and J. Paul Gostelow (University of Leicester). The workshop followed the theme, venue, and informal format of four earlier workshops: Minnowbrook I (1993), Minnowbrook II (1997), Minnowbrook III (2000), and Minnowbrook IV (2003). The workshop was focused on physical understanding of unsteady flows in turbomachinery, with the specific goal of contributing to engineering application of improving design codes for turbomachinery. The workshop participants included academic researchers from the United States and abroad and representatives from the gas-turbine industry and U.S. Government laboratories. The physical mechanisms discussed were related to unsteady wakes, active flow control, turbulence, bypass and natural transition, separation bubbles and turbulent spots, modeling of turbulence and transition, heat transfer and cooling, surface roughness, unsteady CFD, and DNS. This CD-ROM contains copies of the viewgraphs presented, organized according to the workshop sessions. Full-color viewgraphs and animations are included. The workshop summary and the plenary discussion transcripts clearly highlight the need for continued vigorous research in the technologically important area of unsteady flows in turbomachines.
1975-05-01
civil agencies through interage..:y agreements. One of the Navy field activities, the Naval Ammunition Depot at Crane , Indiana, has developed rather...chemical mixing compartment and chem- ical dosing tank assures adequate contact time. Solids and organics are hydrolyzed by the caustic , while the...The high caustic level of the treated waste water resulted in corrosion to various points in the system. Pumps required extensive weekly maintenance
The 1994 Fiber Optic Sensors for Aerospace Technology (FOSAT) Workshop
NASA Technical Reports Server (NTRS)
Baumbick, Robert (Compiler); Adamovsky, Grigory (Compiler); Tuma, Meg (Compiler); Beheim, Glenn (Compiler); Sotomayor, Jorge (Compiler)
1995-01-01
The NASA Lewis Research Center conducted a workshop on fiber optic technology on October 18-20, 1994. The workshop objective was to discuss the future direction of fiber optics and optical sensor research, especially in the aerospace arena. The workshop was separated into four sections: (1) a Systems Section which dealt specifically with top level overall architectures for the aircraft and engine; (2) a Subsystems Section considered the parts and pieces that made up the subsystems of the overall systems; (3) a Sensor/Actuators section considered the status of research on passive optical sensors and optical powered actuators; and (4) Components Section which addressed the interconnects for the optical systems (e.g., optical connectors, optical fibers, etc.). This report contains the minutes of the discussion on the workshop, both in each section and in the plenary sessions. The slides used by a limited number of presenters are also included as presented. No attempt was made to homogenize this report. The view of most of the attendees was: (1) the government must do a better job of disseminating technical information in a more timely fashion; (2) enough work has been done on the components, and system level architecture definition must dictate what work should be done on components; (3) a Photonics Steering Committee should be formed to coordinate the efforts of government and industry in the photonics area, to make sure that programs complimented each other and that technology transferred from one program was used in other programs to the best advantage of the government and industry.
Practical tools for assessing potential crown fire behavior and canopy fuel characteristics
Martin E. Alexander; Miguel G. Cruz
2015-01-01
This presentation recapitulates the main points made at a technology and information transfer workshop held in advance of the conference that provided overviews of two software applications, developed by the authors, for use in assessing crown fire behavior and canopy fuel characteristics. These are the Crown Fire Initiation and Spread (CFIS) software system and the...
Technology requirements for an orbiting fuel depot - A necessary element of a space infrastructure
NASA Technical Reports Server (NTRS)
Stubbs, R. M.; Corban, R. R.; Willoughby, A. J.
1988-01-01
Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect of criticality ratings. Over 70 depot-related technology areas are addressed.
Technology requirements for an orbiting fuel depot: A necessary element of a space infrastructure
NASA Technical Reports Server (NTRS)
Stubbs, R. M.; Corban, R. R.; Willoughby, A. J.
1988-01-01
Advanced planning within NASA has identified several bold space exploration initiatives. The successful implementation of these missions will require a supporting space infrastructure which would include a fuel depot, an orbiting facility to store, transfer and process large quantities of cryogenic fluids. In order to adequately plan the technology development programs required to enable the construction and operation of a fuel depot, a multidisciplinary workshop was convened to assess critical technologies and their state of maturity. Since technology requirements depend strongly on the depot design assumptions, several depot concepts are presented with their effect on criticality ratings. Over 70 depot-related technology areas are addressed.
Minnowbrook V: 2006 Workshop on Unsteady Flows in Turbomachinery. (Conference Abstracts)
NASA Technical Reports Server (NTRS)
LaGraff, John E. (Editor); Ashpis, David E. (Editor); Oldfield, Martin L. G. (Editor); Gostelow, J. Paul (Editor)
2006-01-01
This volume contains materials presented at the Minnowbrook V 2006 Workshop on Unsteady Flows in Turbomachinery, held at the Syracuse University Minnowbrook Conference Center, New York, on August 20-23, 2006. The workshop organizers were John E. LaGraff (Syracuse University), Martin L.G. Oldfield (Oxford University), and J. Paul Gostelow (University of Leicester). The workshop followed the theme, venue, and informal format of four earlier workshops: Minnowbrook I (1993), Minnowbrook II (1997), Minnowbrook III (2000), and Minnowbrook IV (2003). The workshop was focused on physical understanding of unsteady flows in turbomachinery, with the specific goal of contributing to engineering application of improving design codes for turbomachinery. The workshop participants included academic researchers from the United States and abroad and representatives from the gas-turbine industry and U.S. Government laboratories. The physical mechanisms discussed were related to unsteady wakes, active flow control, turbulence, bypass and natural transition, separation bubbles and turbulent spots, modeling of turbulence and transition, heat transfer and cooling, surface roughness, unsteady CFD, and DNS. The workshop summary and the plenary discussion transcripts clearly highlight the need for continued vigorous research in the technologically important area of unsteady flows in turbomachines. This volume contains abstracts and copies of select viewgraphs organized according to the workshop sessions. Full-color viewgraphs and animations are included in the CD-ROM version only (Doc.ID 20070024781).
1988-07-01
I Activities 1. Potential Low Energy Antiproton Sources in the United States 15 D.C. Peaslee (University of Maryland) 2. Low Energy Antiproton...Nieto, R.J. Hughes (Los Alamos National Laboratory) 2. Basic Physics Program for a Low Energy Antiproton Source in North America 245 B.E. Bonner (Rice...J.L. Callas (Jet Propulsioi< Laboratory) 5r> Energy Transfer in Antiproton Annihilation Rockets 577 B.N. Cassenti (United Technologies Research Center
A regional technology transfer program
NASA Technical Reports Server (NTRS)
1978-01-01
The final report is presented for the North Carolina Science and Technology Research Center's 14th consecutive contract period as a NASA Industrial Applications Center, serving the information needs of nine Southeastern states. Included in the report are figures for and analysis of marketing efforts, file usage, search delivered, and other services performed for clients; and information on staff changes, workshops, and special projects in 1978. An appendix contains copies of NC/STRC magazine advertisements, letters from clients, and supplementary information on NC/STRC staff and services.
PROCEEDINGS OF THE 1999 OIL HEAT TECHNOLOGY CONFERENCE AND WORKSHOP.
DOE Office of Scientific and Technical Information (OSTI.GOV)
MCDONALD,R.J.
1999-04-01
The 1999 Oil Heat Technology Conference and Workshop, April 15-16 at Brookhaven National Laboratory (BNL) is sponsored by the U. S. Department of Energy, Office of Building Technology, State and Community Programs (DOEBTS). The meeting is also co-sponsored by the: Petroleum Marketers Association of America, New England Fuel Institute, Oilheat Manufacturers Association, National Association of Oil Heat Service Managers, New York State Energy Research and Development Authority, Empire State Petroleum Association, New York Oil Heating Association, Oil Heat Institute of Long Island, and the Pennsylvania Petroleum Association. BNL is proud to acknowledge all of our 1999 co-sponsors, without their helpmore » and support the conference would have been canceled due to budget restrictions. It is quite gratifying to see an industry come together to help support an activity like the technology conference, for the benefit of the industry as a whole. The 1999 Oil Heat Technology Conference and Workshop, will be the thirteenth since 1984, is a very valuable technology transfer activity supported by the ongoing Combustion Equipment Technology (Oilheat R and D) program at BNL. The foremost reason for the conference is to provide a platform for the exchange of information and perspectives among international researchers, engineers, manufacturers, service technicians, and marketers of oil-fired space-conditioning equipment. They will provide a conduit by which information and ideas can be exchanged to examine present technologies, as well as helping to develop the future course for oil heating advancement. These conferences also serve as a stage for unifying government representatives, researchers, fuel oil marketers, and other members of the oil-heat industry in addressing technology advancements in this important energy use sector.« less
US-Europe Workshop on Impact of Multifunctionality on Damage Evolution in Composite Materials
2015-09-01
Inventions (DD882) Scientific Progress See Attachment Technology Transfer Not applicable UNIVERSITY OF ILLINOIS AEROSPACE ENGINEERING...Composite Materials PI: Ioannis Chasiotis Aerospace Engineering University of Illinois at Urbana-Champaign Talbot Lab, 104 S. Wright Street, Urbana, IL...focused on the current state of corporate research in the aerospace industry which is a major potential adopter of multifunctional composites. The two
Wyoming Carbon Capture and Storage Institute
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nealon, Teresa
This report outlines the accomplishments of the Wyoming Carbon Capture and Storage (CCS) Technology Institute (WCTI), including creating a website and online course catalog, sponsoring technology transfer workshops, reaching out to interested parties via news briefs and engaging in marketing activities, i.e., advertising and participating in tradeshows. We conclude that the success of WCTI was hampered by the lack of a market. Because there were no supporting financial incentives to store carbon, the private sector had no reason to incur the extra expense of training their staff to implement carbon storage. ii
Overview of ground coupled heat pump research and technology transfer activities
NASA Astrophysics Data System (ADS)
Baxter, V. D.; Mei, V. C.
Highlights of DOE-sponsored ground coupled heat pump (GCHP) research at Oak Ridge National Laboratory (ORNL) are presented. ORNL, in cooperation with Niagara Mohawk Power Company, Climate Master, Inc., and Brookhaven National Laboratory developed and demonstrated an advanced GCHP design concept with shorter ground coils that can reduce installed costs for northern climates. In these areas it can also enhance the competitiveness of GCHP systems versus air-source heat pumps by lowering their payback from 6 to 7 years to 3 to 5 years. Ground coil heat exchanger models (based primarily on first principles) have been developed and used by others to generate less conservative ground coil sizing methods. An aggressive technology transfer initiative was undertaken to publicize results of this research and make it available to the industry. Included in this effort were an international workshop, trade press releases and articles, and participation in a live teleconference on GCHP technology.
Insiders Views of the Valley of Death Behavioral and Institutional Perspectives
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wolfe, Amy K; Bjornstad, David J; Shumpert, Barry L
Valley of death describes the metaphorical depths to which promising science and technology too often plunge, never to emerge and reach their full potential. Behavioral and institutional perspectives help in understanding the implications of choices that inadvertently lead into rather than over the valley of death. A workshop conducted among a diverse set of scientists, managers, and technology transfer staff at a U.S. national laboratory is a point of departure for discussing behavioral and institutional elements that promote or impede the pathway from research toward use, and for suggesting actionable measures that can facilitate the flow of information and productsmore » from research toward use. In the complex systems that comprise research institutions, where competing pressures can create barriers to information or technology transfer, one recommendation is to re-frame the process as a more active ushering toward use.« less
Workshop on Technology Development Issues for the Large Deployable Reflector (LDR)
NASA Technical Reports Server (NTRS)
Nishioka, Kenji (Editor)
1986-01-01
The results of the 2nd Large Deployable Reflector (LDR) Technology Review Workshop held at Asilomar, California, March 17 to 22, 1985, are summarized. The workshop was convened to update LDR Technology status and to revise as necessary the results for the first LDR Workshop held in June 1982. There were some 100 participants representing government agencies, industry, and universities. This Workshop's goal was to assess, identify, and set priorities for the LDR technology issues based on requirements identified in the first workshop. Four high-priority technology areas were identified: (1) mirror materials and construction; (2) sensing and controls; (3) system-simulation and modeling capability; and (4) submillimeter instruments. The results of the workshop were used to provide a list of technolgy issues for the development of a technology initiatives plan for the LDR by NASA's Office of Aeronautics and Space Technology.
Minnowbrook I: 1993 Workshop on End-Stage Boundary Layer Transition
NASA Technical Reports Server (NTRS)
LaGraff, John E. (Editor)
2007-01-01
This volume contains materials presented at the Minnowbrook I-1993 Workshop on End-Stage Boundary Layer Transition, held at the Syracuse University Minnowbrook Conference Center, New York, from August 15 to 18, 1993. This volume was previously published as a Syracuse University report edited by John E. LaGraff. The workshop organizers were John E. LaGraff (Syracuse University), Terry V. Jones (Oxford University), and J. Paul Gostelow (University of Technology, Sydney). The workshop focused on physical understanding of the late stages of transition from laminar to turbulent flows, with the specific goal of contributing to improving engineering design of turbomachinery and wing airfoils. The workshop participants included academic researchers from the United States and abroad, and representatives from the gas-turbine industry and U.S. government laboratories. To improve interaction and discussions among the participants, no formal papers were required. The physical mechanisms discussed were related to natural and bypass transition, wake-induced transition, effects of freestream turbulence, turbulent spots, hairpin vortices, nonlinear instabilities and breakdown, instability wave interactions, intermittency, turbulence, numerical simulation and modeling of transition, heat transfer in boundary-layer transition, transition in separated flows, laminarization, transition in turbomachinery compressors and turbines, hypersonic boundary-layer transition, and other related topics. This volume contains abstracts and copies of the viewgraphs presented, organized according to the workshop sessions. The workshop summary and the plenary discussion transcript clearly outline future research needs.
NASA's Electronic Procurement System and the Impact on Small Business
NASA Technical Reports Server (NTRS)
Dozier, Ken
1998-01-01
Three workshops, held in Lancaster, Orange County and Compton, were produced by the Los Angeles Regional Technology Alliance (LARTA) and NASA Far West Technology Transfer Center (FWRTTC). The workshops were held on December 12, 1997, February 5, 1998, and March 30, 1998, respectively. The purpose behind these workshops was to spread information regarding NASA procurement opportunities to small businesses in the region. This was accomplished by inviting economic and business development organizations to the three workshops, presenting NASA procurement resources to them, and asking them to distribute this information to the small businesses in their communities. With the assistance of LARTA, marketing and publicity in the form of direct mail, telemarketing, and promotion via a web site was implemented to publicize the workshops. These methods were remarkably effective because they enabled the workshops to attain its full capacity. Further publicity was provided by Wendy Reed of Valley Focus Magazine, an Antelope Valley Magazine aimed at business people. Her article entitled, "Doing Business with the Government" recapped the Lancaster workshop that she had attended and made references to several presentations. In the article, she discussed selling to the government via electronic commerce, and specifically mentioned Robert Medina, the NASA Dryden Small Business Specialist, as a contact person for those interested in pursuing procurement opportunities. The feedback provided by the participants is illustrated by the enclosed graphs and charts. These figures represent the number of participants who have frequented web sites presented at workshops, specifically the NASA procurement resources, and how extensive information dissemination was. Input from participants was favorable and encouraged more NASA Dryden workshops directly to the small business communities. There was an overwhelming response to the benefit of the NASA procurement opportunities presented at the workshops. Ninety-nine percent of participants who responded to surveys expressed that the NASA procurement information was beneficial. By the fifth month after the start of the workshops, NASA procurement resource inquiries peaked at 100%. Also during this time, 100% of respondents to a survey mentioned that they had passed along information from workshops to other small businesses or organizations that could benefit from it. These results indicate successful implementation of the Dryden Workshops. The objective of spreading NASA procurement opportunities throughout small businesses in the region was achieved through the three workshops. In conclusion, we recommend that further NASA procurement workshops be funded to continue the education and outreach that has been started. We also feel that in addition to targeting economic development service providers, Dryden procurement should also be provided directly to small business communities.
From Hallucination to Fiction: The Invention of Meaning in Psychosis.
Lippi, Silvia; Lehaire, Célia; Petit, Laetitia
2016-12-01
Taking their inspiration from a case history, the authors explore the effects of a writing workshop led by a professional writer for patients in a psychiatric hospital. This workshop allowed different modes of transference to unfold: transference to the analyst-therapist, transference to the writer who led the workshop, and transference to the other members of the group. The writing activity created conditions in which there could be a movement from hallucination to delusion-a delusion expressed in fiction through the act of writing. Psychotic patients "invent" a writing that remains unfinished and that relates to the experiences of persecution. Writing thus makes it possible for them to tolerate language, through its transformation into writing.
Transfer Wisdom Workshops: Coming to a NASA Center Near You
NASA Technical Reports Server (NTRS)
Lee, Denise
2003-01-01
In november 2001, the APPL Knowledge Sharing Initiative introduced a new product, the transfer wisdom workshop. The idea was to give practitioners at each of the NASA centers the opportunity to engage in a knowledge sharing activity.
Integrating PV in Distributed Grids: Solutions and Technologies Workshop |
Energy Systems Integration Facility | NREL Integrating PV in Distributed Grids: Solutions and Technologies Workshop Integrating PV in Distributed Grids: Solutions and Technologies Workshop In October 2015 (PV) onto the grid. The workshop was held at the Energy Systems Integration Facility. Presenters from
Space Transportation Materials and Structures Technology Workshop. Volume 2; Proceedings
NASA Technical Reports Server (NTRS)
Cazier, Frank W., Jr. (Compiler); Gardner, James E. (Compiler)
1993-01-01
The Space Transportation Materials and Structures Technology Workshop was held on September 23-26, 1991, in Newport News, Virginia. The workshop, sponsored by the NASA Office of Space Flight and the NASA Office of Aeronautics and Space Technology, was held to provide a forum for communication within the space materials and structures technology developer and user communities. Workshop participants were organized into a Vehicle Technology Requirements session and three working panels: Materials and Structures Technologies for Vehicle Systems, Propulsion Systems, and Entry Systems.
NASA Technical Reports Server (NTRS)
Kuhlthau, A. R. (Editor)
1976-01-01
The workshop was organized around the study of the three basic transfer functions required to evaluate and/or predict passenger acceptance of transportation systems: These are the vehicle, passenger, and value transfer functions. For the purpose of establishing working groups corresponding to the basic transfer functions, it was decided to split the vehicle transfer function into two distinct groups studying surface vehicles and air/marine vehicles, respectively.
77 FR 26509 - Notice of Public Meeting-Cloud Computing Forum & Workshop V
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-04
...--Cloud Computing Forum & Workshop V AGENCY: National Institute of Standards & Technology (NIST), Commerce. ACTION: Notice. SUMMARY: NIST announces the Cloud Computing Forum & Workshop V to be held on Tuesday... workshop. This workshop will provide information on the U.S. Government (USG) Cloud Computing Technology...
78 FR 23574 - Public Workshop on Marine Technology and Standards
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-19
... Technology and Standards AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The American Society of... workshop on marine technology and standards in Arlington, VA. We originally published a notice regarding... Engineers/United States Coast Guard (ASME/USCG) Workshop on Marine Technology and Standards provides a...
Technology for Space Station Evolution. Executive summary and overview
NASA Technical Reports Server (NTRS)
1990-01-01
NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on technology for space station evolution 16-19 Jan. 1990. The purpose of this workshop was to collect and clarify Space Station Freedom technology requirements for evolution and to describe technologies that can potentially fill those requirements. These proceedings are organized into an Executive Summary and Overview and five volumes containing the technology discipline presentations. The Executive Summary and Overview contains an executive summary for the workshop, the technology discipline summary packages, and the keynote address. The executive summary provides a synopsis of the events and results of the workshop and the technology discipline summary packages.
Advanced Training Technologies and Learning Environments
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)
1999-01-01
This document contains the proceedings of the Workshop on Advanced Training Technologies and Learning Environments held at NASA Langley Research Center, Hampton, Virginia, March 9-10, 1999. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees were from NASA, other government agencies, industry, and universities. The objective of the workshop was to assess the status and effectiveness of different advanced training technologies and learning environments.
NASA Technical Reports Server (NTRS)
Misra, Ajay
2018-01-01
A workshop on assessment of battery technologies for future aerospace applications was held in Cleveland, OH on August 16-17. The focus of the workshop, hosted by NASA GRC, was to assess (1) the battery needs for future aerospace missions, (2) the state of battery technology and projected technology advances, and (3) the need for additional investments for future aerospace missions. The workshop had 109 attendees that included internationally recognized technology leaders from academia and national laboratories, high level executives from government and industry, small businesses, and startup companies. A significant portion of the workshop was focused on batteries for electrified aircraft. The presentation will summarize the finding on the state of battery technologies for electrified aircraft and will include assessment of current state of battery technology, gaps in battery technology for application in electrified aircraft, and recommended technology development options for meeting near-term and long-term needs of electrified aircraft.
ERIC Educational Resources Information Center
Vavoula, Giasemi N.; Sharples, Mike
2007-01-01
We describe the future technology workshop (FTW), a method whereby people with everyday knowledge or experience in a specific area of technology use (such as using digital cameras) envision and design the interactions between current and future technology and activity. Through a series of structured workshop sessions, participants collaborate to…
1987-05-04
FTIILE COP’ AD-A196 840 EMERGING TECHNOLOGIES PROGRAM INTEGRATION REPORT VOLUME II BACKGROUND, DELPHI AND WORKSHOP DATA, APPENDICES . -- PREPARED...Security Classification) Emerging Technologies Program Integration Report Volume II: Background, Delphi and Workshop Data; Appendices (U) 12 PERSONAL...volumes of this integration report assess and synthesize information gathered through a Delphi survey, defense needs prioritization workshops, and
FY 2000 Saltcake Dissolution and Feed Stability Workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hunt, R.D.; McGinnis, C.P.; Weber, C.F.
2000-07-31
The Tanks Focus Area (TFA) continues to work closely with the Office of River Protection (ORP) to better understand the chemistry involved with the retrieval, transport, and pretreatment of nuclear wastes at Hanford. Since a private contractor is currently responsible for the pretreatment and immobilization activities in this remediation effort, the TFA has concentrated on saltcake dissolution and waste transport at the request of the ORP. Researchers at Hanford have performed a series of dissolution experiments on actual saltcake samples. Staff members at Mississippi State University (MSU) continue to model the dissolution results with the Environmental Simulation Program (ESP), whichmore » is used extensively by ORP personnel. Several ways to improve the predictive capabilities of the ESP were identified. Since several transfer lines at Hanford have become plugged, TFA tasks at AEA Technologies, Florida International University (FIU), MSU, and Oak Ridge National Laboratory (ORNL) are investigating the behavior of the supernatants and slurries during transport. A combination of experimental and theoretical techniques is used to study the transport chemistry. This effort is expected to develop process control tools for waste transfer. The results from these TFA tasks were presented to ORP personnel during the FY 2000 Saltcake Dissolution and Feed Stability Workshop, which was held on May 16-17 in Richland, Washington. The minutes from this workshop are provided in this report.« less
Technological Literacy Workshop. Proceedings. (Washington, D.C., May 6-8, 1991).
ERIC Educational Resources Information Center
Jones, Russel C., Ed.
This document reports the proceedings of a workshop on Technological Literacy. The objectives of the workshop were: to review programs and to identify issues in technological literacy for liberal arts majors; to discuss mechanisms for the stimulation of appropriate additional technological literacy programs; and to develop an action plan for…
77 FR 74829 - Notice of Public Meeting-Cloud Computing and Big Data Forum and Workshop
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-18
...--Cloud Computing and Big Data Forum and Workshop AGENCY: National Institute of Standards and Technology... Standards and Technology (NIST) announces a Cloud Computing and Big Data Forum and Workshop to be held on... followed by a one-day hands-on workshop. The NIST Cloud Computing and Big Data Forum and Workshop will...
75 FR 8099 - Public Workshop on Marine Technology and Standards
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-23
... Technology and Standards AGENCY: Coast Guard, DHS. ACTION: Notice. SUMMARY: The American Society of...-day public workshop in Washington DC on marine technology and standards. This public workshop will provide a unique opportunity for classification societies, industry groups, standards development...
ERIC Educational Resources Information Center
Redden, Martha Ross, Ed.; Stern, Virginia W., Ed.
This book is based upon group participation and presentations given at three regional workshops on science and technology for the handicapped. The first workshop focused on issues in technology for daily living. Papers presented examined such areas as daily living technology for the disabled, psychological aspects of rehabilitation engineering,…
Aeronautical technology 2000: A projection of advanced vehicle concepts
NASA Technical Reports Server (NTRS)
1985-01-01
The Aeronautics and Space Engineering Board (ASEB) of the National Research Council conducted a Workshop on Aeronautical Technology: a Projection to the Year 2000 (Aerotech 2000 Workshop). The panels were asked to project advances in aeronautical technologies that could be available by the year 2000. As the workshop was drawing to a close, it became evident that a more comprehensive investigation of advanced air vehicle concepts than was possible in the limited time available at the workshop would be valuable. Thus, a special panel on vehicle applications was organized. In the course of two meetings, the panel identified and described representative types of aircraft judged possible with the workshop's technology projections. These representative aircraft types include: military aircraft; transport aircraft; rotorcraft; extremely high altitude aircraft; and transatmospheric aircraft. Improvements in performance, efficiency, and operational characteristics possible through the application of the workshop's year 2000 technology projections were discussed. The subgroups also identified the technologies considered essential and enhancing or supporting to achieve the projected aircraft improvements.
Scott, Jason; Heavey, Emily; Waring, Justin; Jones, Diana; Dawson, Pamela
2016-01-01
Objective To develop and validate a mechanism for patients to provide feedback on safety experiences following a care transfer between organisations. Design Qualitative study using participatory methods (codesign workshops) and cognitive interviews. Workshop data were analysed concurrently with participants, and cognitive interviews were thematically analysed using a deductive approach based on the developed feedback mechanism. Participants Expert patients (n=5) and healthcare professionals (n=11) were recruited purposively to develop the feedback mechanism in 2 workshops. Workshop 1 explored principles underpinning safety feedback mechanisms, and workshop 2 included the practical development of the feedback mechanism. Final design and content of the feedback mechanism (a safety survey) were verified by workshop participants, and cognitive interviews (n=28) were conducted with patients. Results Workshop participants identified that safety feedback mechanisms should be patient-centred, short and concise with clear signposting on how to complete, with an option to be anonymous and balanced between positive (safe) and negative (unsafe) experiences. The agreed feedback mechanism consisted of a survey split across 3 stages of the care transfer: departure, journey and arrival. Care across organisational boundaries was recognised as being complex, with healthcare professionals acknowledging the difficulty implementing changes that impact other organisations. Cognitive interview participants agreed the content of the survey was relevant but identified barriers to completion relating to the survey formatting and understanding of a care transfer. Conclusions Participatory, codesign principles helped overcome differences in understandings of safety in the complex setting of care transfers when developing a safety survey. Practical barriers to the survey's usability and acceptability to patients were identified, resulting in a modified survey design. Further research is required to determine the usability and acceptability of the survey to patients and healthcare professionals, as well as identifying how governance structures should accommodate patient feedback when relating to multiple health or social care providers. PMID:27406641
The 1973 GSFC battery workshop, second day. [technology transfer
NASA Technical Reports Server (NTRS)
1973-01-01
Technological progress in the development, testing, and manufacturing of nickel-cadmium battery cells as well as hydrogen cells is presented. The following major topics were discussed: (1) carbonate analysis; (2) nickel-cadmium memory effect; (3) use of batteries in an automatic acquisition and control system; (4) accelerated testing; (5) formulation of a mathematical odel for a nickel-cadmium cell; (6) development of a light weight nickel-cadmium battery capable of delivering 20 watt hours per pound; (7) magnetic testing of nickel-cadmium cells; (8) design and performance characteristics of nickel-hydrogen and silver-hydrogen cells; and (9) development of a semiprismatic cell design. For Vol. 1, see N75-15152.
Turbine Engine Hot Section Technology 1986
NASA Technical Reports Server (NTRS)
1986-01-01
The Turbine Engine Hot Section Technology (HOST) Project of the NASA Lewis Research Center sponsored a workshop to discuss current research pertinent to turbine engine durability problems. Presentations were made concerning the hot section environment and the behavior of combustion liners, turbine blades, and turbine vanes. The presentations were divided into six sessions: Instrumentation, Combustion, Turbine Heat Transfer, Structural Analysis, Fatigue and Fracture, and Surface Protection. Topics discussed included modeling of thermal and fluid-flow phenomena, structural analysis, fatigue and fracture, surface protective coatings, constitutive behavior of materials, stress-strain response, and life-prediction methods. Researchers from industry, academia, and government presented results of their work sponsored by the HOST project.
Effective Technology for Recycling Metal. Proceedings of Two Special Workshops.
ERIC Educational Resources Information Center
National Association of Secondary Material Industries, Inc., New York, NY.
The National Association of Secondary Material Industries (NASMI) and the Bureau of Mines have cooperated to sponsor two technically-oriented workshops related to the role of metals recycling and air pollution control technology. The proceedings of these workshops, "Effective Technology and Research for Scrap Metal Recycling" and "Air Pollution…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Banken, M.K.
The Oklahoma Geological Survey (OGS), the Geo Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma have engaged in a five-year program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program included a systematic and comprehensive collection and evaluation of information on all FDD oil reservoirs in Oklahoma and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. The execution of this project was approached in phases. The first phase began in January, 1993 and consisted of planning, play identificationmore » and analysis, data acquisition, database development, and computer systems design. By the middle of 1994, many of these tasks were completed or nearly finished including the identification of all FDD reservoirs in Oklahoma, data collection, and defining play boundaries. By early 1995, a preliminary workshop schedule had been developed for project implementation and technology transfer activities. Later in 1995, the play workshop and publication series was initiated with the Morrow and the Booch plays. Concurrent with the initiation of the workshop series was the opening of a computer user lab that was developed for use by the petroleum industry. Industry response to the facility initially was slow, but after the first year lab usage began to increase and is sustaining. The remaining six play workshops were completed through 1996 and 1997, with the project ending on December 31, 1997.« less
Preface to COAST 2016 innovators' workshop on personalized and precision orthodontic therapy.
Nickel, J C; Covell, D A; Frazier-Bowers, S A; Kapila, S; Huja, S S; Iwasaki, L R
2017-06-01
A second focused workshop explored how to transfer novel findings into clinical orthodontic practice. Participants met in West Palm Beach (Florida, USA), on 9-11 September 2016 for the Consortium for Orthodontic Advances in Science and Technology 2016 Innovators' Workshop (COAST). Approximately 65 registered attendees considered and discussed information from 27 to 34 speakers, 8 to 15 poster presenters and four lunch-hour focus group leaders. The innovators' workshops were organized according to five themed sessions. The aims of the discussion sessions were to identify the following: i) the strength and impact of the evidenced-based discoveries, ii) required steps to enable further development and iii) required steps to translate these new discoveries into orthodontic practice. The role of gene-environment interactions that underlie complex craniofacial traits was the focus of several sessions. It was agreed that diverse approaches are called for, such as (i) large-scale collaborative efforts for future genetic studies of complex traits; (ii) deep genome sequencing to address the issues of isolated mutations; (iii) quantifying epigenetic-environmental variables in diverse areas myofascial pain, alveolar remodelling and mandibular growth. Common needs identified from the themed sessions were multiscale/multispecies modelling and experimentation using controlled and quantified mechanics and translation of the findings in bone biology between species. Panel discussions led to the consensus that a consortium approach to establish standards for intra-oral scanning and 3D imaging should be initiated. Current and emerging technologies still require supported research to translate new findings from the laboratory to orthodontic practice. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.
Advanced Learning Technologies and Learning Networks and Their Impact on Future Aerospace Workforce
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler)
2003-01-01
This document contains the proceedings of the training workshop on Advanced Learning Technologies and Learning Networks and their impact on Future Aerospace Workforce. The workshop was held at the Peninsula Workforce Development Center, Hampton, Virginia, April 2 3, 2003. The workshop was jointly sponsored by Old Dominion University and NASA. Workshop attendees came from NASA, other government agencies, industry, and universities. The objectives of the workshop were to: 1) provide broad overviews of the diverse activities related to advanced learning technologies and learning environments, and 2) identify future directions for research that have high potential for aerospace workforce development. Eighteen half-hour overviewtype presentations were made at the workshop.
Haystack Observatory VLBI Correlator
NASA Technical Reports Server (NTRS)
Titus, Mike; Cappallo, Roger; Corey, Brian; Dudevoir, Kevin; Niell, Arthur; Whitney, Alan
2013-01-01
This report summarizes the activities of the Haystack Correlator during 2012. Highlights include finding a solution to the DiFX InfiniBand timeout problem and other DiFX software development, conducting a DBE comparison test following the First International VLBI Technology Workshop, conducting a Mark IV and DiFX correlator comparison, more broadband delay experiments, more u- VLBI Galactic Center observations, and conversion of RDV session processing to the Mark IV/HOPS path. Non-real-time e-VLBI transfers and engineering support of other correlators continued.
2006-06-01
Questions • Ecosystem Management • Impacts of NIS on TER-S • Synthesis and Prioritization of Aquatic and Terrestrial Issues • Technology Transfer ii... impacts of these threats and their consequences to the forest ecosystem . He further stated that the lack of public education about the value of...It is also possible to look at adaptive management as an experimental approach to better understand ecosystem processes and the impact of
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1996-05-01
The purpose of the workshop was to foster communication within the technical community on issues surrounding stabilization and immobilization of the Department`s surplus plutonium and plutonium- contaminated wastes. The workshop`s objectives were to: build a common understanding of the performance, economics and maturity of stabilization and immobilization technologies; provide a system perspective on stabilization and immobilization technology options; and address the technical issues associated with technologies for stabilization and immobilization of surplus plutonium and plutonium- contaminated waste. The papers presented during this workshop have been indexed separately.
EDITORIAL: Molecular Imaging Technology
NASA Astrophysics Data System (ADS)
Asai, Keisuke; Okamoto, Koji
2006-06-01
'Molecular Imaging Technology' focuses on image-based techniques using nanoscale molecules as sensor probes to measure spatial variations of various species (molecular oxygen, singlet oxygen, carbon dioxide, nitric monoxide, etc) and physical properties (pressure, temperature, skin friction, velocity, mechanical stress, etc). This special feature, starting on page 1237, contains selected papers from The International Workshop on Molecular Imaging for Interdisciplinary Research, sponsored by the Ministry of Education, Culture, Sports, Science and Technology (MEXT) in Japan, which was held at the Sendai Mediatheque, Sendai, Japan, on 8 9 November 2004. The workshop was held as a sequel to the MOSAIC International Workshop that was held in Tokyo in 2003, to summarize the outcome of the 'MOSAIC Project', a five-year interdisciplinary project supported by Techno-Infrastructure Program, the Special Coordination Fund for Promotion of Science Technology to develop molecular sensor technology for aero-thermodynamic research. The workshop focused on molecular imaging technology and its applications to interdisciplinary research areas. More than 110 people attended this workshop from various research fields such as aerospace engineering, automotive engineering, radiotechnology, fluid dynamics, bio-science/engineering and medical engineering. The purpose of this workshop is to stimulate intermixing of these interdisciplinary fields for further development of molecular sensor and imaging technology. It is our pleasure to publish the seven papers selected from our workshop as a special feature in Measurement and Science Technology. We will be happy if this issue inspires people to explore the future direction of molecular imaging technology for interdisciplinary research.
Workshop on Science and Technology Education and Productive Work. Final Report.
ERIC Educational Resources Information Center
Ministry of Education, Addis Ababa (Ethiopia).
This workshop was organized as a contribution to Ethiopia's human resettlement activities necessitated by the recurrent drought. The objectives of the workshop were to: (1) appraise the relevance of basic rural technologies and identify modalities of their application; (2) develop materials in the fields of biotechnology and basic technology; (3)…
Space Transportation Materials and Structures Technology Workshop. Volume 1: Executive summary
NASA Technical Reports Server (NTRS)
Cazier, F. W., Jr. (Compiler); Gardner, J. E. (Compiler)
1992-01-01
The workshop was held to provide a forum for communication within the space materials and structures technology developer and user communities. Workshop participants were organized into a Vehicle Technology Requirements session and three working panels: Materials and Structures Technologies for Vehicle Systems; Propulsion Systems; and Entry Systems. The goals accomplished were (1) to develop important strategic planning information necessary to transition materials and structures technologies from lab research programs into robust and affordable operational systems; (2) to provide a forum for the exchange of information and ideas between technology developers and users; and (3) to provide senior NASA management with a review of current space transportation programs, related subjects, and specific technology needs. The workshop thus provided a foundation on which a NASA and industry effort to address space transportation materials and structures technologies can grow.
E-BEST Principles: Infusing Technology into the Writing Workshop
ERIC Educational Resources Information Center
Coskie, Tracy L.; Hornof, M. Michelle
2013-01-01
As teachers work to move their writing workshop into the 21st century and to help students meet new standards expectations, they are ramping up their use of technology. This article lays out a set of guiding principles (E-BEST) to help teachers make reflective choices, so that the digital technologies in their workshops will enhance and extend…
Ninth Thermal and Fluids Analysis Workshop Proceedings
NASA Technical Reports Server (NTRS)
Sakowski, Barbara (Compiler)
1999-01-01
The Ninth Thermal and Fluids Analysis Workshop (TFAWS 98) was held at the Ohio Aerospace Institute in Cleveland, Ohio from August 31 to September 4, 1998. The theme for the hands-on training workshop and conference was "Integrating Computational Fluid Dynamics and Heat Transfer into the Design Process." Highlights of the workshop (in addition to the papers published herein) included an address by the NASA Chief Engineer, Dr. Daniel Mulville; a CFD short course by Dr. John D. Anderson of the University of Maryland; and a short course by Dr. Robert Cochran of Sandia National Laboratories. In addition, lectures and hands-on training were offered in the use of several cutting-edge engineering design and analysis-oriented CFD and Heat Transfer tools. The workshop resulted in international participation of over 125 persons representing aerospace and automotive industries, academia, software providers, government agencies, and private corporations. The papers published herein address issues and solutions related to the integration of computational fluid dynamics and heat transfer into the engineering design process. Although the primary focus is aerospace, the topics and ideas presented are applicable to many other areas where these and other disciplines are interdependent.
NASA Technical Reports Server (NTRS)
Grey, J. (Editor)
1982-01-01
An attempt has been made to compare the technologies, institutions and procedures of the aerospace and commercial nuclear power industries, in order to characterize similarities and contrasts as well as to identify the most fruitful means by which to transfer information, technology, and procedures between the two industries. The seven working groups involved in this study took as their topics powerplant design formulation and effectiveness, plant safety and operations, powerplant control technology and integration, economic and financial analyses, public relations, and the management of nuclear waste and spent fuel. Consequential differences are noted between the two industries in matters of certification and licencing procedures, assignment of responsibility for both safety and financial performance, and public viewpoint. Areas for beneficial interaction include systems management and control and safety system technology. No individual items are abstracted in this volume
Proceedings -- US Russian workshop on fuel cell technologies (in English;Russian)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Baker, B.; Sylwester, A.
1996-04-01
On September 26--28, 1995, Sandia National Laboratories sponsored the first Joint US/Russian Workshop on Fuel Cell Technology at the Marriott Hotel in Albuquerque, New Mexico. This workshop brought together the US and Russian fuel cell communities as represented by users, producers, R and D establishments and government agencies. Customer needs and potential markets in both countries were discussed to establish a customer focus for the workshop. Parallel technical sessions defined research needs and opportunities for collaboration to advance fuel cell technology. A desired outcome of the workshop was the formation of a Russian/American Fuel Cell Consortium to advance fuel cellmore » technology for application in emerging markets in both countries. This consortium is envisioned to involve industry and national labs in both countries. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.« less
Space Transportation Technology Workshop: Propulsion Research and Technology
NASA Technical Reports Server (NTRS)
2000-01-01
This viewgraph presentation gives an overview of the Space Transportation Technology Workshop topics, including Propulsion Research and Technology (PR&T) project level organization, FY 2001 - 2006 project roadmap, points of contact, foundation technologies, auxiliary propulsion technology, PR&T Low Cost Turbo Rocket, and PR&T advanced reusable technologies RBCC test bed.
How to conduct a workshop on medical writing: Tips, advice and experience sharing.
Rathore, Farooq Azam; Mansoor, Sahibzada Nasir
2015-06-01
Medical writing has become an essential skill for anybody in academia and engaged in teaching. Workshops on medical writing are an effective way to teach the essential skills of medical writing to students and faculty members. There is a huge demand for these workshops all around the globe. Usually there is no curriculum of medical writing for the undergraduates or dedicated structured training sessions for the faculty members. One of the authors won an Author AID grant to conduct a series of workshops on medical writing. Eight workshops were conducted in three months, benefitting more than 200 students and faculty staff. We share our experience of holding this successful series of workshops with the aim that it might serve as a guide for researchers and faculty members who are eager to share and transfer their skills and knowledge. We also offer lessons learnt during this educational activity, tips to improve the quality and delivery of the content with limited resources and maximizing the impact. Experienced medical writers need to conduct these workshops to transfer their skills and to facilitate their colleagues and students to become better medical writers. Planning, rehearsal, motivation, resource management, good team work, audience analysis and feedback can make a workshop successful. Well prepared workshop content delivered in an interactive way with a variety of activities makes the workshop an engaging and interesting educational activity.
Sensors Workshop summary report
NASA Technical Reports Server (NTRS)
1977-01-01
A review of the efforts of three workshops is presented. The presentation describes those technological developments that would contribute most to sensor subsystem optimization and improvement of NASA's data acquisition capabilities, and summarizes the recommendations of the sensor technology panels from the most recent workshops.
Rocket Based Combined Cycle (RBCC) Propulsion Technology Workshop. Volume 1: Executive summary
NASA Technical Reports Server (NTRS)
Chojnacki, Kent T.
1992-01-01
The goal of the Rocket-Based Combined Cycle (RBCC) Propulsion Technology Workshop was to assess the RBCC propulsion system's viability for Earth-to-Orbit (ETO) transportation systems. This was accomplished by creating a forum (workshop) in which past work in the field of RBCC propulsion systems was reviewed, current technology status was evaluated, and future technology programs in the field of RBCC propulsion systems were postulated, discussed, and recommended.
Workshop on NASA workstation technology
NASA Technical Reports Server (NTRS)
Brown, Robert L.
1990-01-01
RIACS hosted a workshop which was designed to foster communication among those people within NASA working on workstation related technology, to share technology, and to learn about new developments and futures in the larger university and industrial workstation communities. Herein, the workshop is documented along with its conclusions. It was learned that there is both a large amount of commonality of requirements and a wide variation in the modernness of in-use technology among the represented NASA centers.
Transferring Learning from the Workshop to the Classroom
ERIC Educational Resources Information Center
Johnson, Kimberly A.
2009-01-01
As coordinator of the ABE Teaching and Learning Advancement System (ATLAS) based in the Hamline University School of Education in St. Paul, the author does many workshops or conference sessions in Minnesota's nine professional development regions each year. Typical single-day events offer multiple 90-minute workshops. She often questions the…
Space Mechanisms Technology Workshop
NASA Technical Reports Server (NTRS)
Oswald, Fred B. (Editor)
2001-01-01
The Mechanical Components Branch at NASA Glenn Research Center hosted a workshop to discuss the state of drive systems technology needed for space exploration. The Workshop was held Thursday, November 2, 2000. About 70 space mechanisms experts shared their experiences from working in this field and considered technology development that will be needed to support future space exploration in the next 10 to 30 years.
NASA Technical Reports Server (NTRS)
1976-01-01
Twelve aerothermodynamic space technology needs were identified to reduce the design uncertainties in aerodynamic heating and forces experienced by heavy lift launch vehicles, orbit transfer vehicles, and advanced single stage to orbit vehicles for the space transportation system, and for probes, planetary surface landers, and sample return vehicles for solar system exploration vehicles. Research and technology needs identified include: (1) increasing the fluid dynamics capability by at least two orders of magnitude by developing an advanced computer processor for the solution of fluid dynamic problems with improved software; (2) predicting multi-engine base flow fields for launch vehicles; and (3) developing methods to conserve energy in aerothermodynamic ground test facilities.
INTERACTIVE ABANDONED MINE LANDS WORKSHOP SERIES - ACID MINE WATER TREATMENT TECHNOLOGIES
The purpose of this interactive workshop is to present and discuss active and passive acid mine wastes cleanup technologies and to discuss the apparent disconnect between their development and their implementation. The workshop addressed five main barriers to implementing innovat...
Mars Rover/Sample Return (MRSR) Mission: Mars Rover Technology Workshop
NASA Technical Reports Server (NTRS)
1987-01-01
A return to the surface of Mars has long been an objective of NASA mission planners. The ongoing Mars Rover and Sample Return (MRSR) mission study represents the latest stage in that interest. As part of NASA's preparation for a possible MRSR mission, a technology planning workshop was held to attempt to define technology requirements, options, and preliminary plans for the principal areas of Mars rover technology. The proceedings of that workshop are presented.
1992 NASA Life Support Systems Analysis workshop
NASA Technical Reports Server (NTRS)
Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.
1992-01-01
The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements.
Camanzi, B; Green, S
2012-12-01
The workshop "Cancer care: new detector and sensor technologies and their potential impact", organised jointly by the Science and Technology Facilities Council (STFC) and the British Institute of Radiology, brought together representatives from the cancer community (clinicians, medical physicists, National Health Service representatives and general practitioners with an interest in cancer) and STFC-supported scientists involved in basic research in physics and technology. The workshop aimed to raise awareness of the cancer challenge, share knowledge and identify novel solutions in the area of detectors and sensors to addressing the cancer challenge. A further aim of this workshop was to commence discussion on the formation of new multidisciplinary community networks. The workshop identified the synergies between the two communities and the potential for developing new collaborative ideas and projects.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Richmond, C.R.
1988-09-30
The traveler participated in the Workshop on the Transfer of Radionuclides to Livestock which was held at the Christ Church College-University of Oxford, September 5-8, 1988. The traveler was a member of the program committee that was made up of representatives from ten countries. In addition, the traveler presented a key invited paper entitled ''Transfer of Radionuclides to Animals --- An Historical Perspective of Work Done in the United States.'' The aim of the workshop was to review current information obtained from both observations and experimental studies on how various parameters can influence the mechanisms of transfer of radionuclides tomore » human food stuffs. These parameters include source and composition of the diet, chemical form of radionuclides, season, agricultural practices, species, strain, and age. The importance and application of countermeasures for reducing the transfer of radionuclides to food stuffs was also considered. The last session of the meeting included summaries and presentations by each session chairman. This was followed by a general discussion by the attendees that was most profitable and stimulating.« less
The U.S. EPA Envirnomental Technology Verification (ETV) and Small Business Innovation Research (SBIR) Program hosted a workshop on May 8, 2007, at the EPA Region 6 office in Dallas, Texas. One goal of the workshop was to provide information about new innovative technologies to ...
TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Unknown
2000-11-01
The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions during Fiscal Year 2000 (FY00). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs) who bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors connect with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operatorsmore » and service companies working with the Regional Lead Organizations. The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies. This technical progress report summarizes PTTC's accomplishments during FY00, which lays the groundwork for further growth in the future. At a time of many industry changes and market movements, the organization has built a reputation and expectation to address industry needs of getting information distributed quickly which can impact the bottom line immediately.« less
NASA Astrophysics Data System (ADS)
Gingras, A.; Knowlton, C. W.; Scowcroft, G. A.; Babb, I.; Coleman, D.; Morin, H.
2016-02-01
The Marine Technology for Teachers and Students (MaTTS) Project implements a year-long continuum of activities beginning with educators reading and reporting on peer-reviewed publications, followed by face-to-face, hands-on weekend workshops and virtual professional development activities. Teams of teacher and student leaders then participate in an intensive, residential Summer Institute (SI) that emphasizes hands-on building of marine related technologies and exposure to career pathways through direct interactions with ocean scientists and engineers. During the school year, teachers integrate ocean science technology and data into their classrooms and participate, along with colleagues and students from their schools, in science cafes and webinars. Student leaders transfer knowledge gained by engaging their district's middle school students in ocean science activities and technologies by serving as hosts for live broadcasts that connect classrooms with ocean scientists and engineers though the Inner Space Center, a national ocean science telecommunications hub. Communication technologies bridge formal and informal learning environments, allowing MaTTS participants to interact with their fellow cohort members, scientists, and engineers both during and outside of school. Evaluation results indicate that for teachers both the weekend workshops and SI were most effective in preparing them to integrate ocean science and technology in STEM curricula and increase their ocean science content knowledge and leadership characteristics. For students the SI and the middle school interactions supported gains in knowledge, awareness, leadership skills and interest in ocean sciences and technologies, and related STEM careers. In particular, the connections made by working directly with scientists have positively impacted both student and teacher leaders. This presentation will provide an overview of the MaTTS model and early evaluation results.
Securing Information Technology in Healthcare
Anthony, Denise; Campbell, Andrew T.; Candon, Thomas; Gettinger, Andrew; Kotz, David; Marsch, Lisa A.; Molina-Markham, Andrés; Page, Karen; Smith, Sean W.; Gunter, Carl A.; Johnson, M. Eric
2014-01-01
Dartmouth College’s Institute for Security, Technology, and Society conducted three workshops on securing information technology in healthcare, attended by a diverse range of experts in the field. This article summarizes the three workshops. PMID:25379030
Space Mechanisms Technology Workshop Proceedings
NASA Technical Reports Server (NTRS)
Fusaro, Robert L. (Editor)
1999-01-01
Over the years, NASA has experienced a number of troublesome mechanism anomalies. Because of this, the NASA Office of Safety and Mission Assurance initiated a workshop to evaluate the current space mechanism state-of-the-art and to determine the obstacles that will have to be met in order to achieve NASA's future missions goals. Seventy experts in the field attended the workshop. The experts identified current and perceived future space mechanisms obstacles. For each obstacle, the participants identified technology deficiencies, the current state-of-the-art, and applicable NASA, DOD, and industry missions. In addition, the participants at the workshop looked at technology needs for current missions, technology needs for future missions, what new technology is needed to improve the reliability of mechanisms, what can be done to improve technology development and the dissemination of information, and what do we do next.
The Pilot Land Data System: Report of the Program Planning Workshops
NASA Technical Reports Server (NTRS)
1984-01-01
An advisory report to be used by NASA in developing a program plan for a Pilot Land Data System (PLDS) was developed. The purpose of the PLDS is to improve the ability of NASA and NASA sponsored researchers to conduct land-related research. The goal of the planning workshops was to provide and coordinate planning and concept development between the land related science and computer science disciplines, to discuss the architecture of the PLDs, requirements for information science technology, and system evaluation. The findings and recommendations of the Working Group are presented. The pilot program establishes a limited scale distributed information system to explore scientific, technical, and management approaches to satisfying the needs of the land science community. The PLDS paves the way for a land data system to improve data access, processing, transfer, and analysis, which land sciences information synthesis occurs on a scale not previously permitted because of limits to data assembly and access.
The First Seasat-A Industrial Users Workshop
NASA Technical Reports Server (NTRS)
Hicks, K. W.
1978-01-01
The purpose of this workshop was to begin the process of definition and development of the SEASAT-A Demonstration Program, leading to the implementation of a set of experiments which would begin during the latter part of 1978 following the launch of SEASAT-A (now scheduled for May 1978). NASA through the SEASAT-A program, has encouraged the planning of cooperative experiments by industry and government agencies that operate in areas of ocean activity that could benefit from improved measurements and forecasts of weather and ocean conditions. The objectives of these experiments are to: (1) evaluate the significance of SEASAT-A data to commercial user organizations; (2) assist in identifying those characteristics of follow-on systems that are important to industrial users; (3) obtain experimental evidence that could be used to refine estimates of the economic potential of an operational system; and (4) begin the technology transfer process to the industrial users.
The 1987 Goddard Space Flight Center Battery Workshop
NASA Technical Reports Server (NTRS)
Morrow, George (Editor); Yi, Thomas Y. (Editor)
1993-01-01
This document contains the proceedings of the 20th annual Battery Workshop held at Goddard Space Flight Center, Greenbelt, Maryland on November 4-5, 1987. The workshop attendees included manufacturers, users, and government representatives interested in the latest developments in battery technology as they relate to high reliability operations and aerospace use. The subjects covered included lithium cell technology and safety improvements, nickel-cadmium electrode technology along with associated modifications, flight experience and life testing of nickel-cadmium cells, and nickel-hydrogen applications and technology.
2011-01-22
Middle school teachers from across Louisiana participate in a hands-on activity during a professional development workshop at Louisiana State University in Baton Rouge on Jan. 22, 2011. Fifty-five teachers participated in the workshop, which was hosted by the Stennis Education Office. During the workshop, Stennis specialists presented hands-on, problem-based learning and technology-based activities teachers can use in their classrooms to promote interest in areas of science, technology, engineering and mathematics.
The Assessment and Management of Suicide Risk: State of Workshop Education
Pisani, Anthony R.; Cross, Wendi F.; Gould, Madelyn S.
2012-01-01
A systematic search of popular and scholarly databases identified workshops that addressed general clinical competence in the assessment or management of suicide risk, targeted mental health professionals, and had at least one peerreviewed publication. We surveyed workshop developers and examined empirical articles associated with each workshop. The state of workshop education is characterized by presenting the learning objectives, educational formats, instructor factors, and evaluation studies. Workshops are efficacious for transferring knowledge and shifting attitudes; however, their role in improving clinical care and outcomes of suicidal patients has yet to be determined. PMID:21477093
After globalization future security in a technology rich world
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gilmartin, T J
Over the course of the year 2000, five one-day workshops were conducted by the Center for Global Security Research at the Lawrence Livermore National Laboratory on threats that might come against the US and its allies in the 2015 to 2020 timeframe due to the global availability of advanced technology. These workshops focused on threats that are enabled by nuclear, missile, and space technology; military technology; information technology; bio technology; and geo systems technology. In December, an Integration Workshop and Senior Review before national leaders and experts were held. The participants and reviewers were invited from the DOE National Laboratories,more » the DOD Services, OSD, DTRA, and DARPA, the DOS, NASA, Congressional technical staff, the intelligence community, universities and university study centers, think tanks, consultants on national security issues, and private industry. For each workshop the process of analysis involved identification and prioritization of the participants' perceived most severe threat scenarios (worst nightmares), discussion of the technologies which enabled those threats, and ranking of the technologies' threat potentials. We were not concerned in this exercise with defining responses, although our assessment of each threat's severity included consideration of the ease or difficulty with which it might be countered. At the concluding Integration Workshop and Senior Panel Review, we brought the various workshops' participants together, added senior participant/reviewers with broad experience and responsibility, and discussed the workshop findings to determine what is most certain, and uncertain, and what might be needed to resolve our uncertainties. This document reports the consensus and important variations of both the reviewers and the participants. In all, 45 threats over a wide range of lethality and probability of occurrence were identified. Over 60 enabling technologies were also discussed. These are each described in greater detail in the following pages, after overarching considerations are discussed. Here we present the major conclusions of this project, which each include consideration of several threats and their enabling technologies.« less
Meeting Stakeholder Energy Technology Education Needs Using a Mobile Demonstration
ERIC Educational Resources Information Center
de Koff, Jason P.; Ricketts, John C.; Robbins, Chris; Illukpitiya, Prabodh; Wade, Alvin
2017-01-01
Understanding the impact of workshops that include mobile demonstrations for describing technical applications can be useful when planning an Extension program on new energy technologies. We used a mobile demonstration in a workshop that provided information on small-scale on-farm biodiesel production. Evaluation of the workshop outcomes…
An NCI-FDA Interagency Oncology Task Force (IOTF) Molecular Diagnostics Workshop was held on October 30, 2008 in Cambridge, MA, to discuss requirements for analytical validation of protein-based multiplex technologies in the context of its intended use. This workshop developed through NCI's Clinical Proteomic Technologies for Cancer initiative and the FDA focused on technology-specific analytical validation processes to be addressed prior to use in clinical settings. In making this workshop unique, a case study approach was used to discuss issues related to
Bridging the Gap from Networking Technologies to Applications: Workshop Report
NASA Technical Reports Server (NTRS)
Johnson, Marjory J.; desJardins, Richard
2000-01-01
The objective of the Next Generation Internet (NGI) Federal program is threefold, encompassing development of networking technologies, high-performance network testbeds, and revolutionary applications. There have been notable advances in emerging network technologies and several nationwide testbeds have been established, but the integration of emerging technologies into applications is lagging. To help bridge this gap between developers of NGI networking technologies and developers of NGI applications, the NASA Research and Education Network (NREN) project hosted a two-day workshop at NASA Ames Research Center in August 1999. This paper presents a summary of the results of this workshop and also describes some of the challenges NREN is facing while incorporating new technologies into HPCC and other NASA applications. The workshop focused on three technologies - Quality of Service (QoS), advanced multicast, and security-and five major NGI application areas - telemedicine, digital earth, digital video, distributed data-intensive applications, and computational infrastructure applications. Network technology experts, application developers, and NGI testbed representatives came together at the workshop to promote cross-fertilization between the groups. Presentations on the first day, including an overview of the three technologies, application case studies and testbed status reports, laid the foundation for discussions on the second day. The objective of these latter discussions, held within smaller breakout groups, was to establish a coherent picture of the current status of the various pieces of each of the three technologies, to create a roadmap outlining future technology development, and to offer technological guidance to application developers. In this paper we first present a brief overview of the NGI applications that were represented at the workshop, focusing on the identification of technological advances that have successfully been incorporated in each application and technological challenges that remain. Next we present the technology roadmaps that were created at the workshop, summarizing the status of various mechanisms that are currently under development and forecasting when various advances are likely to occur within the next one-to-three-year time span. Then we identify issues that were raised at the workshop that might hinder technology development or that might impede integration into NGI applications. We also report some specific guidelines that were offered at the workshop to enable application developers to integrate and effectively use emerging NGI technology building blocks. Finally, we describe NREN activities to incorporate emerging technologies into NASA applications. These activities include support for other NASA High-Performance Computing and Communications Program areas such as IPG (Information Power Grid), support for NASA science enterprises such as Earth science and Mars program prototyping activities, support for satellite/terrestrial networking applications such as the TransAtlantic and TransPacific demonstrations and the Interplanetary Internet, support for NASA telemedicine applications such as the Virtual Collaborative Clinic, and participation in NGI advanced technology testbed initiatives such as the QBone and the NTON/Supernet. For each activity we highlight the primary technological challenge that is associated with it.
PV Reliability Workshop | Photovoltaic Research | NREL
Laboratory. NREL hosts an annual Photovoltaic Reliability Workshop (PVRW) so that solar technology experts Photovoltaic Reliability Workshop (PVRW) will be held Tuesday, February 27, to Thursday, March 1, at the workshop. 2017 Workshop The 2017 Photovoltaic Reliability Workshop (PVRW) was Tuesday, February 28, to
NASA Technical Reports Server (NTRS)
Culbert, Chris; French, Scott W.; Hamilton, David
1994-01-01
Knowledge-based systems (KBS's) are in general use in a wide variety of domains, both commercial and government. As reliance on these types of systems grows, the need to assess their quality and validity reaches critical importance. As with any software, the reliability of a KBS can be directly attributed to the application of disciplined programming and testing practices throughout the development life-cycle. However, there are some essential differences between conventional software and KBSs, both in construction and use. The identification of these differences affect the verification and validation (V&V) process and the development of techniques to handle them. The recognition of these differences is the basis of considerable on-going research in this field. For the past three years IBM (Federal Systems Company - Houston) and the Software Technology Branch (STB) of NASA/Johnson Space Center have been working to improve the 'state of the practice' in V&V of Knowledge-based systems. This work was motivated by the need to maintain NASA's ability to produce high quality software while taking advantage of new KBS technology. To date, the primary accomplishment has been the development and teaching of a four-day workshop on KBS V&V. With the hope of improving the impact of these workshops, we also worked directly with NASA KBS projects to employ concepts taught in the workshop. This paper describes two projects that were part of this effort. In addition to describing each project, this paper describes problems encountered and solutions proposed in each case, with particular emphasis on implications for transferring KBS V&V technology beyond the NASA domain.
Workshop Report on Space Weather Risks and Society
NASA Technical Reports Server (NTRS)
Langhoff, Stephanie R.; Straume, Tore
2012-01-01
As technological innovations produce new capabilities, complexities, and interdependencies, our susceptibility to the societal impacts of space weather increase. There is real concern in the scientific community that our infrastructure would be at significant risk if a major geomagnetic storm should occur. To discuss the societal impacts of space weather, we brought together an interdisciplinary group of subject matter experts and societal stakeholders to participate in a workshop entitled Space Weather Risks and Society. The workshop was held at Ames Research Center (ARC) on 15-16 October 2011. The workshop was co-sponsored by NASA Ames Research Center (ARC), the Lockheed Martin Advanced Technology Center (LMATC), the Space Weather Prediction Center (SWPC, part of the National Oceanic and Atmospheric Administration NOAA), and the Rutherford Appleton Laboratory (RAL, part of the UK Science and Technology Facilities Council STFC). The workshop is part of a series of informal weekend workshops hosted by Center Director Pete Worden.
Sensor technology workshop: Structure and goals
NASA Technical Reports Server (NTRS)
Wilson, Barbara A.
1991-01-01
The Astrotech 21 charter for the second of three workshops is described. The purpose was to identify technology needs in the areas of electromagnetic radiation sensors, and to recommend a plan to develop the required capabilities that are not currently available. The panels chosen for this workshop focused specifically on those technologies needed for the Astrotech 21 Program including: gamma ray and x ray sensors, ultraviolet and visible sensors, direct infrared sensors, and heterodyne submillimeter wave sensors.
Workshop proceedings: Information Systems for Space Astrophysics in the 21st Century, volume 1
NASA Technical Reports Server (NTRS)
Cutts, James (Editor); Ng, Edward (Editor)
1991-01-01
The Astrophysical Information Systems Workshop was one of the three Integrated Technology Planning workshops. Its objectives were to develop an understanding of future mission requirements for information systems, the potential role of technology in meeting these requirements, and the areas in which NASA investment might have the greatest impact. Workshop participants were briefed on the astrophysical mission set with an emphasis on those missions that drive information systems technology, the existing NASA space-science operations infrastructure, and the ongoing and planned NASA information systems technology programs. Program plans and recommendations were prepared in five technical areas: Mission Planning and Operations; Space-Borne Data Processing; Space-to-Earth Communications; Science Data Systems; and Data Analysis, Integration, and Visualization.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankin, C.J.; Banken, M.K.
The Oklahoma Geological Survey (OGS), the Geo Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma are engaged in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all ofmore » Oklahoma`s oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs. Specifically, this project will identify all FDD oil reservoirs in the State; group those reservoirs into plays that have similar depositional origins; collect, organize and analyze all available data conduct characterization and simulation studies on selected reservoirs in each play; and implement a technology transfer program targeted to the operators of FDD reservoirs. Activities were focused primarily on technology transfer elements of the project. This included regional play analysis and mapping, geologic field studies, and reservoir modeling for secondary water flood simulations as used in publication folios and workshops. The computer laboratory was fully operational for operator use. Computer systems design and database development activities were ongoing.« less
Technology for NASA's Planetary Science Vision 2050.
NASA Technical Reports Server (NTRS)
Lakew, B.; Amato, D.; Freeman, A.; Falker, J.; Turtle, Elizabeth; Green, J.; Mackwell, S.; Daou, D.
2017-01-01
NASAs Planetary Science Division (PSD) initiated and sponsored a very successful community Workshop held from Feb. 27 to Mar. 1, 2017 at NASA Headquarters. The purpose of the Workshop was to develop a vision of planetary science research and exploration for the next three decades until 2050. This abstract summarizes some of the salient technology needs discussed during the three-day workshop and at a technology panel on the final day. It is not meant to be a final report on technology to achieve the science vision for 2050.
Workshop: Valuation for Environmental Policy: Ecological Benefits (2007)
Two-day workshop includes research examining There were presentations on the estimation of values for ecological goods and services such as water quality, wetlands, riparian habitat, and aquatic resources, improved methods for benefits transfer.
ERIC Educational Resources Information Center
Lau, Wilfred Wing Fat; Yuen, Allan Hoi Kau
2013-01-01
This study examined the effects of educational technology training workshops on perception changes of mathematics teachers. Three perceptions, namely, pedagogical orientation, efficacy, and liking in relation to technology integration, were explored in this study. Two research questions were addressed: Do educational technology training workshops…
78 FR 16675 - First Technology Transitions; Policy Task Force Workshop
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-18
... FEDERAL COMMUNICATIONS COMMISSION [GN Docket No. 13-5; DA 13-383] First Technology Transitions... workshops to analyze technology transitions from narrowband to broadband; from time-division multiplexing... capabilities of wireless and wireline (copper, fiber and coax) technologies today and in the future. 11:30 a.m...
2004-02-01
National Science and Technology Council Committee on Technology Subcommittee on Nanoscale Science, Engineering , and Technology National...18 About the Nanoscale Science, Engineering , and Technology Subcommittee The Nanoscale Science, Engineering , and Technology (NSET) Subcommittee is the...workshop was to examine trends and opportunities in nanoscale science and engineering as applied to electronic, photonic, and magnetic technologies
2017 Marine Hydrokinetic Instrumentation Workshop Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Driscoll, Frederick R; Mauer, Erik; Rieks, Jeff
The third Marine Hydrokinetic Instrumentation Workshop was held at Florida Atlantic University's Sea Tech Campus in Dania Beach, Florida, from February 28 to March 1, 2017. The workshop brought together 37 experts in marine energy measurement, testing, and technology development to present and discuss the instrumentation and data-processing needs of the marine energy industry. The workshop was comprised of a plenary session followed by two focused breakout sessions. The half-day plenary session reviewed findings from prior instrumentation workshops, presented research activities that aim to fill previously identified gaps, and had industry experts present the state of the marine energy measurementmore » technologies. This report provides further detail on the workshop, objectives, and findings.« less
Algae Cultivation for Carbon Capture and Utilization Workshop Summary Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
None, None
The Algae Cultivation for Carbon Capture and Utilization Workshop Summary Report summarizes a workshop hosted by the U.S. Department of Energy's Bioenergy Technologies Office on May 23–24, 2017, in Orlando, Florida. The event gathered stakeholder input through facilitated discussions focused on innovative technologies and business strategies for growing algae on waste carbon dioxide resources.
Algae Cultivation for Carbon Capture and Utilization Workshop Summary Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
None, None
2017-05-01
The Algae Cultivation for Carbon Capture and Utilization Workshop Summary Report summarizes a workshop hosted by the U.S. Department of Energy's Bioenergy Technologies Office on May 23–24, 2017, in Orlando, Florida. The event gathered stakeholder input through facilitated discussions focused on innovative technologies and business strategies for growing algae on waste carbon dioxide resources.
Documentary Linguistics and Computational Linguistics: A Response to Brooks
ERIC Educational Resources Information Center
Bird, Steven; Chiang, David; Frowein, Friedel; Hanke, Florian; Vaswani, Ashish
2015-01-01
In mid-2012, the authors organized a two-week workshop in Papua New Guinea to provide training in basic techniques and technologies for language documentation, and to gain understanding of how these technologies might be improved in the future. An assessment of the workshop was conducted by Brooks with the central idea that the workshop's…
An assessment of lighter than air technology
NASA Technical Reports Server (NTRS)
Vittek, J. F., Jr. (Editor)
1975-01-01
The workshop on LTA is summarized. The history and background are reviewed. The workshop reports for the following working groups are presented: policy, market analysis, economics, operations, and technology.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-30
...).'' This workshop series provides a forum for the AMNPO to present the proposed design of the National...: Blueprint for Action: Workshop on the Design of the National Network for Manufacturing Innovation (NNMI... Standards and Technology (NIST), announces the first workshop in a new series of public workshops entitled...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pellegrino, Joan; Jamison, Keith
2015-12-01
This report is based on the proceedings of the U.S. DOE Roundtable and Workshop on Advanced Steel Technologies Workshop hosted by Oak Ridge National Laboratory (ORNL) in cooperation with the U.S. Department of Energy s (DOE s) Advanced Manufacturing Office (AMO) on held on June 23, 2015. Representatives from industry, government, and academia met at the offices of the National Renewable Energy Laboratory in Washington, DC, to share information on emerging steel technologies, issues impacting technology investment and deployment, gaps in research and development (R&D), and opportunities for greater energy efficiency. The results of the workshop are summarized in thismore » report. They reflect a snapshot of the perspectives and ideas generated by the individuals who attended and not all-inclusive of the steel industry and stakeholder community.« less
NASA Workshop on Technology for Human Robotic Exploration and Development of Space
NASA Technical Reports Server (NTRS)
Mankins, J. C.; Marzwell, N.; Mullins, C. A.; Christensen, C. B.; Howell, J. T.; O'Neil, D. A.
2004-01-01
Continued constrained budgets and growing interests in the industrialization and development of space requires NASA to seize every opportunity for assuring the maximum return on space infrastructure investments. This workshop provided an excellent forum for reviewing, evaluating, and updating pertinent strategic planning, identifying advanced concepts and high-risk/high-leverage research and technology requirements, developing strategies and roadmaps, and establishing approaches, methodologies, modeling, and tools for facilitating the commercial development of space and supporting diverse exploration and scientific missions. Also, the workshop addressed important topic areas including revolutionary space systems requiring investments in innovative advanced technologies; achieving transformational space operations through the insertion of new technologies; revolutionary science in space through advanced systems and new technologies enabling experiments to go anytime to any location; and, innovative and ambitious concepts and approaches essential for promoting advancements in space transportation. Details concerning the workshop process, structure, and results are contained in the ensuing report.
North Region ROW tool implementation workshop.
DOT National Transportation Integrated Search
2010-08-02
Welcome to the North Region ROW Tool Workshop. This workshop is funded under an implementation project sponsored by TxDOTs Research & Technology Implementation Office (RTI). This is the second of four regional workshops being planned for this summ...
Distance Learning With NASA Lewis Research Center's Learning Technologies Project
NASA Technical Reports Server (NTRS)
Petersen, Ruth
1998-01-01
The NASA Lewis Research Center's Learning Technologies Project (LTP) has responded to requests from local school district technology coordinators to provide content for videoconferencing workshops. Over the past year we have offered three teacher professional development workshops that showcase NASA Lewis-developed educational products and NASA educational Internet sites. In order to determine the direction of our involvement with distance learning, the LTP staff conducted a survey of 500 U.S. schools. We received responses from 72 schools that either currently use distance learning or will be using distance learning in 98-99 school year. The results of the survey are summarized in the article. In addition, the article provides information on distance learners, distance learning technologies, and the NASA Lewis LTP videoconferencing workshops. The LTP staff will continue to offer teacher development workshops through videoconferencing during the 98-99 school year. We hope to add workshops on new educational products as they are developed at NASA Lewis.
Research needs to better understand Lake Ontario ecosystem function: A workshop summary
Stewart, Thomas J.; Rudstam, Lars G.; Watkins, James M.; Johnson, Timothy B.; Weidel, Brian C.; Koops, Marten A.
2016-01-01
Lake Ontario investigators discussed and interpreted published and unpublished information during two workshops to assess our current understanding of Lake Ontario ecosystem function and to identify research needs to guide future research and monitoring activities. The purpose of this commentary is to summarize key investigative themes and hypotheses that emerged from the workshops. The outcomes of the workshop discussions are organized under four themes: spatial linkages and interactions, drivers of primary production, trophic transfer, and human interactions.
New Space Industries for the Next Millennium
NASA Technical Reports Server (NTRS)
Smitherman, D. V., Jr. (Compiler)
1998-01-01
New Space Industries For the Next Millennium is a final report of the findings from the New Space Industries Workshop held in Washington, DC, in February 1998. The primary purpose of this workshop was to identify what must be done to develop new markets, and to generate plans, milestones and new organizational relationships designed to facilitate the goal of space development. This document provides a summary report on the results of that workshop and is not intended as a statement of NASA or government policy. Previous studies had shown great potential for the development of new markets in space (e.g., travel and entertainment, space solar power, satellite and space transfer services, research and development in space, space manufacturing, and space resources), and a great need for coordination and formation of infrastructures (e.g., space transportation, space business parks, and space utilities), to facilitate the growth of new space businesses. The New Space Industries Workshop brought together government, academia, and industry participants from several previous studies and other professionals interested in the development of space for commercial purposes. Their participation provided input into the role of government and industry in space development as well as the technology needs that will enable space development. The opening of the frontier of space, not just to government missions but to private individuals and commercial business, is a challenge of overarching importance. It is our hope that the workshop and this final report continue in earnest the process of identifying and overcoming the barriers to large-scale public access and development of space in the early years of the next century.
Proceedings of the 1998 diesel engine emissions reduction workshop [DEER
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
This workshop was held July 6--9, 1998 in Castine, Maine. The purpose of this workshop was to provide a multidisciplinary forum for exchange of state-of-the-art information on reduction of diesel engine emissions. Attention was focused on the following: agency/organization concerns on engine emissions; diesel engine issues and challenges; health risks from diesel engines emissions; fuels and lubrication technologies; non-thermal plasma and urea after-treatment technologies; and diesel engine technologies for emission reduction 1 and 2.
Magnetic Suspension Technology Workshop
NASA Technical Reports Server (NTRS)
Keckler, Claude R. (Editor); Groom, Nelson J. (Editor); Britcher, Colin P. (Editor)
1993-01-01
In order to identify the state of magnetic suspension technology in such areas as rotating systems, pointing of experiments or subsystems, payload isolation, and superconducting materials, a workshop on Magnetic Suspension Technology was held at the Langley Research Center in Hampton, Virginia, on 2-4 Feb. 1988. The workshop included five technical sessions in which a total of 24 papers were presented. The technical sessions covered the areas of pointing, isolation, and measurement, rotating systems, modeling and control, and superconductors. A list of attendees is provided.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Roseman, Mallory; Zikry, Fareeda
Lawrence Livermore National Laboratory’s Center for Global Security Research hosted a workshop to investigate why some consistently predicted threats from science and technology (S&T) have not manifested with the impacts to international security as forecasted. During the workshop, “Dogs That Haven’t Barked: Towards an Understanding of the Absence of Expected Technological Threats,” participants used two specific cases to focus the discussion: biotechnology and man-portable air defense systems (MANPADS).
Technical Education Outreach in Materials Science and Technology Based on NASA's Materials Research
NASA Technical Reports Server (NTRS)
Jacobs, James A.
2003-01-01
The grant NAG-1 -2125, Technical Education Outreach in Materials Science and Technology, based on NASA s Materials Research, involves collaborative effort among the National Aeronautics and Space Administration s Langley Research Center (NASA-LaRC), Norfolk State University (NSU), national research centers, private industry, technical societies, colleges and universities. The collaboration aims to strengthen math, science and technology education by providing outreach related to materials science and technology (MST). The goal of the project is to transfer new developments from LaRC s Center for Excellence for Structures and Materials and other NASA materials research into technical education across the nation to provide educational outreach and strengthen technical education. To achieve this goal we are employing two main strategies: 1) development of the gateway website
Principles of Technology. Workshop Presenter's Handbook for Pennsylvania Educators.
ERIC Educational Resources Information Center
Wichowski, Chester P.
This workshop presenter's handbook was developed to provide assistance to those who will serve as Principles of Technology trainers of science, industrial arts/technology education, and mathematics teachers throughout Pennsylvania. The handbook provides trainers with presentation materials, transparency masters, suggested activities, and selected…
1991 NASA Life Support Systems Analysis workshop
NASA Technical Reports Server (NTRS)
Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.
1992-01-01
The 1991 Life Support Systems Analysis Workshop was sponsored by NASA Headquarters' Office of Aeronautics and Space Technology (OAST) to foster communication among NASA, industrial, and academic specialists, and to integrate their inputs and disseminate information to them. The overall objective of systems analysis within the Life Support Technology Program of OAST is to identify, guide the development of, and verify designs which will increase the performance of the life support systems on component, subsystem, and system levels for future human space missions. The specific goals of this workshop were to report on the status of systems analysis capabilities, to integrate the chemical processing industry technologies, and to integrate recommendations for future technology developments related to systems analysis for life support systems. The workshop included technical presentations, discussions, and interactive planning, with time allocated for discussion of both technology status and time-phased technology development recommendations. Key personnel from NASA, industry, and academia delivered inputs and presentations on the status and priorities of current and future systems analysis methods and requirements.
Workshop on Surface Science and Technology Held in Ann Arbor, Michigan on 7-9 November 1990
1992-03-01
assess the state of the art of surface science and technology as well as to identify new research opportunities essential for the understanding and control...The objective of this workshop was to review and assess the state of the art of surface science and technology as well as to identify new research...AD-A253 566 ’ # 4 - m~~i n~nl lInIir ~~ na Ri1 ?epoi’rt: EN 1Workshop on Surface Science and Technology DTIC ft , L-CTE I OUG0 3192 Ann Arbor
NASA Astrophysics Data System (ADS)
Cano, Elena; Fabregat, Jaime; Ros, Rosa M.
2016-08-01
In the framework of a European project to bring astronomy near to children, several permanent teachers training activities were developed. These actions included workshops with teachers from various stages of the educational system. This paper presents the process and results of the evaluation of that training program. It intends to assess the satisfaction of the participants, as well as their learning and their later transfer of formation to the classroom. Barriers encountered in the transfer of formation, some of them linked to the type of training method chosen and other factors derived from personal and institutional conditions, are outlined. Finally, some guidelines for improving the transfer of scientific formation to the classroom in the future are pointed out.
A Workshop on UNIX, Workstations, and Internet Connections.
ERIC Educational Resources Information Center
Vierheller, Timothy R.
1997-01-01
Describes a workshop that introduces participants to the UNIX operating system. Provides an overview of how to access information on the Internet and gain familiarity with Web browsers, file transfer programs, telnet sessions, newsreaders, and Gopher services. (DDR)
USSP-IAEA WORKSHOP ON ADVANCED SENSORS FOR SAFEGUARDS.
DOE Office of Scientific and Technical Information (OSTI.GOV)
PEPPER,S.; QUEIROLO, A.; ZENDEL, M.
2007-11-13
The IAEA Medium Term Strategy (2006-2011) defines a number of specific goals in respect to the IAEA's ability to provide assurances to the international community regarding the peaceful use of nuclear energy through States adherences to their respective non-proliferation treaty commitments. The IAEA has long used and still needs the best possible sensors to detect and measure nuclear material. The Department of Safeguards, recognizing the importance of safeguards-oriented R&D, especially targeting improved detection capabilities for undeclared facilities, materials and activities, initiated a number of activities in early 2005. The initiatives included letters to Member State Support Programs (MSSPs), personal contactsmore » with known technology holders, topical meetings, consultant reviews of safeguards technology, and special workshops to identify new and novel technologies and methodologies. In support of this objective, the United States Support Program to IAEA Safeguards hosted a workshop on ''Advanced Sensors for Safeguards'' in Santa Fe, New Mexico, from April 23-27, 2007. The Organizational Analysis Corporation, a U.S.-based management consulting firm, organized and facilitated the workshop. The workshop's goal was to help the IAEA identify and plan for new sensors for safeguards implementation. The workshop, which was attended by representatives of seven member states and international organizations, included presentations by technology holders and developers on new technologies thought to have relevance to international safeguards, but not yet in use by the IAEA. The presentations were followed by facilitated breakout sessions where the participants considered two scenarios typical of what IAEA inspectors might face in the field. One scenario focused on an enrichment plant; the other scenario focused on a research reactor. The participants brainstormed using the technologies presented by the participants and other technologies known to them to propose techniques and methods that could be used by the IAEA to strengthen safeguards. Creative thinking was encouraged during discussion of the proposals. On the final day of the workshop, the OAC facilitators summarized the participant's ideas in a combined briefing. This paper will report on the results of the April 2007 USSP-IAEA Workshop on Advanced Sensors for Safeguards and give an overview of the proposed technologies of greatest promise.« less
Proceedings of the Circulation-Control Workshop, 1986
NASA Technical Reports Server (NTRS)
Nielsen, Jack N. (Compiler)
1987-01-01
A Circulation Control Workshop was held at NASA Ames by respresentatives of academia, industry, and government. A total of 32 papers were given in six technical sessions covering turbulence, circulation control airfoil theory, circulation control airfoil wing experiments, circulation control rotor theory, x-wing technology, fixed wing technology, and other concepts. The last session of the workshop was devoted to circulation control research planning.
Exploratory Workshop on the Social Impacts of Robotics. Summary and Issues. A Background Paper.
ERIC Educational Resources Information Center
Congress of the U.S., Washington, DC. Office of Technology Assessment.
This report contains a summary of the results of an exploratory workshop to discuss the future of industrial robotics and its likely impact on public policy. Background information is presented, and workshop goals are delineated. Under the general area of robot technology, these topics are covered: the roots of robotics technology, a definition of…
The 1991 NASA Aerospace Battery Workshop
NASA Technical Reports Server (NTRS)
Brewer, Jeffrey C. (Compiler)
1992-01-01
The proceedings from the workshop are presented. The subjects covered include nickel-cadmium, nickel-hydrogen, silver-zinc, and lithium based technologies, as well as advanced technologies including nickel-metal hydride and sodium-sulfur.
IVS Technology Coordinator Report
NASA Technical Reports Server (NTRS)
Whitney, Alan
2013-01-01
This report of the Technology Coordinator includes the following: 1) continued work to implement the new VLBI2010 system, 2) the 1st International VLBI Technology Workshop, 3) a VLBI Digital- Backend Intercomparison Workshop, 4) DiFX software correlator development for geodetic VLBI, 5) a review of progress towards global VLBI standards, and 6) a welcome to new IVS Technology Coordinator Bill Petrachenko.
NASA Technical Reports Server (NTRS)
1976-01-01
Proceedings of a workshop conducted to identify and debate issues and impacts related to future transporation alternatives are presented. Results of the technology assessment of intercity transportation are reviewed.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-03
...: ``Designing for Impact: Workshop on Building the National Network for Manufacturing Innovation'' AGENCY...), housed at the National Institute of Standards and Technology (NIST), announces the first of a series of public workshops entitled ``Designing for Impact: Workshop on Building the National Network for...
NASA Technical Reports Server (NTRS)
Greene, Brian
2011-01-01
The C3P &. NASA International Workshop on Environment and Alternative Energy was held on November 15-18, 2011 at the European Space Agency (ESA)'s Research and Technology Centre (ESTEC) in Noordwijk, The Netherlands. The theme of the workshop was "Global Collaboration in Environmental and Alternative Energy Strategies". The workshop was held at ESTEC's conference center. More than 110 individuals from eleven countries attended the workshop. For the first time since the inception of NASA-C3P workshops, a full day was dedicated to a student session. Fifteen students from around the globe gave oral presentations along with poster displays relating to the latest technologies in environmental and alternative energy strategies. Judges from NASA, C3P and ESA awarded plaques to the top three students. In addition to the students, thirty eight U.S. and international subject matter experts presented on the following general environmental-related topics: (1) Hazardous materials management and substitution in support of space operations (2) Emerging renewable and alternative energy technologies (3) Sustainable development and redevelopment (4) Remediation technologies and strategies The workshop also included a panel discussion on the topic of the challenges of operating installations across borders. Throughout the workshop, attendees heard about the scope of environmental and energy challenges that industry and governments face. They heard about technologies for increasing energy efficiency and increasing use of renewable energy. They learned about ways companies and government agencies are using materials, processes, goods and services in a manner more respectful with the environment and in compliance with health and safety rules. The concept of partnerships and their inherent benefits was evidenced throughout the workshop. Partnering is a key aspect of sustainability because sustainable development is complicated. Through formal presentations and side discussions, attendees commented on the need for continued exploration of joint projects of mutual interest.
McDonald, Peter R; Roy, Anuradha; Chaguturu, Rathnam
2011-05-01
The University of Kansas High-Throughput Screening (KU HTS) core is a state-of-the-art drug-discovery facility with an entrepreneurial open-service policy, which provides centralized resources supporting public- and private-sector research initiatives. The KU HTS core applies pharmaceutical industry project-management principles in an academic setting by bringing together multidisciplinary teams to fill critical scientific and technology gaps, using an experienced team of industry-trained researchers and project managers. The KU HTS proactively engages in supporting grant applications for extramural funding, intellectual-property management and technology transfer. The KU HTS staff further provides educational opportunities for the KU faculty and students to learn cutting-edge technologies in drug-discovery platforms through seminars, workshops, internships and course teaching. This is the first instalment of a two-part contribution from the KU HTS laboratory.
Results of Workshops on Privacy Protection Technologies
NASA Astrophysics Data System (ADS)
Landwehr, Carl
This talk summarizes the results of a series of workshops on privacy protecting technologies convened in the fall of 2006 by the Office of the Director of National Intelligence through its Civil Liberties Protection Office and the (then) Disruptive Technology Office (now part of the Intelligence Advanced Research Projects Activity, IARPA).
Planning and Financing Education Technology.
ERIC Educational Resources Information Center
Harvey, James, Ed.
This report summarizes one of a series of workshops organized by RAND's Critical Technologies Institute (CTI), on behalf of the U.S. Department of Education, to take advantage of the experience and insights of those already implementing new technologies in schools. The workshop consisted chiefly of dialogues with educators and experts from the…
First Aviation System Technology Advanced Research (AvSTAR) Workshop
NASA Technical Reports Server (NTRS)
Denery, Dallas G. (Editor); Weathers, Del W. (Editor); Rosen, Robert (Technical Monitor); Edwards, Tom (Technical Monitor)
2001-01-01
This Conference Proceedings documents the results of a two-day NASA/FAA/Industry workshop that was held at the NASA Ames Research Center, located at Moffett Field, CA, on September 21-22, 2000. The purpose of the workshop was to bring together a representative cross section of leaders in air traffic management, from industry. FAA, and academia, to assist in defining the requirements for a new research effort, referred to as AvSTAR Aviation Systems Technology Advanced Research). The Conference Proceedings includes the individual presentation, and summarizes the workshop discussions and recommendations.
Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants
DOE Office of Scientific and Technical Information (OSTI.GOV)
J. T. Brown; G. Matthern; A. Glenn
The Metals and Radionuclides Product Line of the US Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted andmore » is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies.« less
Reuse in Practice Workshop Summary
1990-04-01
workshop. The SEI is to be commended for their efforts in overcoming a disaster the weekend before the workshop. Power to the SEI building, the originally...increase their technological and economic resources, and merge, their political, economic and technological power will probably eventually transcend that of...parameterzation, a produc- which provide powerful analytical frame- or project must be able to divide and con- works for understanding and optimizing the
Space Station Workstation Technology Workshop Report
NASA Technical Reports Server (NTRS)
Moe, K. L.; Emerson, C. M.; Eike, D. R.; Malone, T. B.
1985-01-01
This report describes the results of a workshop conducted at Goddard Space Flight Center (GSFC) to identify current and anticipated trends in human-computer interface technology that may influence the design or operation of a space station workstation. The workshop was attended by approximately 40 persons from government and academia who were selected for their expertise in some aspect of human-machine interaction research. The focus of the workshop was a 1 1/2 brainstorming/forecasting session in which the attendees were assigned to interdisciplinary working groups and instructed to develop predictions for each of the following technology areas: (1) user interface, (2) resource management, (3) control language, (4) data base systems, (5) automatic software development, (6) communications, (7) training, and (8) simulation. This report is significant in that it provides a unique perspective on workstation design for the space station. This perspective, which is characterized by a major emphasis on user requirements, should be most valuable to Phase B contractors involved in design development of the space station workstation. One of the more compelling results of the workshop is the recognition that no major technological breakthroughs are required to implement the current workstation concept. What is required is the creative application of existing knowledge and technology.
Challenges in image-guided therapy system design.
Dimaio, Simon; Kapur, Tina; Cleary, Kevin; Aylward, Stephen; Kazanzides, Peter; Vosburgh, Kirby; Ellis, Randy; Duncan, James; Farahani, Keyvan; Lemke, Heinz; Peters, Terry; Lorensen, William Bill; Gobbi, David; Haller, John; Clarke, Laurence Larry; Pizer, Stephen; Taylor, Russell; Galloway, Robert; Fichtinger, Gabor; Hata, Nobuhiko; Lawson, Kimberly; Tempany, Clare; Kikinis, Ron; Jolesz, Ferenc
2007-01-01
System development for image-guided therapy (IGT), or image-guided interventions (IGI), continues to be an area of active interest across academic and industry groups. This is an emerging field that is growing rapidly: major academic institutions and medical device manufacturers have produced IGT technologies that are in routine clinical use, dozens of high-impact publications are published in well regarded journals each year, and several small companies have successfully commercialized sophisticated IGT systems. In meetings between IGT investigators over the last two years, a consensus has emerged that several key areas must be addressed collaboratively by the community to reach the next level of impact and efficiency in IGT research and development to improve patient care. These meetings culminated in a two-day workshop that brought together several academic and industrial leaders in the field today. The goals of the workshop were to identify gaps in the engineering infrastructure available to IGT researchers, develop the role of research funding agencies and the recently established US-based National Center for Image Guided Therapy (NCIGT), and ultimately to facilitate the transfer of technology among research centers that are sponsored by the National Institutes of Health (NIH). Workshop discussions spanned many of the current challenges in the development and deployment of new IGT systems. Key challenges were identified in a number of areas, including: validation standards; workflows, use-cases, and application requirements; component reusability; and device interface standards. This report elaborates on these key points and proposes research challenges that are to be addressed by a joint effort between academic, industry, and NIH participants.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Betzler, Benjamin R; Mays, Gary T
2016-01-01
A workshop on Molten Salt Reactor (MSR) technologies commemorating the 50th anniversary of the Molten Salt Reactor Experiment (MSRE) was held at Oak Ridge National Laboratory on October 15 16, 2015. The MSRE represented a pioneering experiment that demonstrated an advanced reactor technology: the molten salt eutectic-fueled reactor. A multinational group of more than 130 individuals representing a diverse set of stakeholders gathered to discuss the historical, current, and future technical challenges and paths to deployment of MSR technology. This paper provides a summary of the key messages from this workshop.
USDA-ARS?s Scientific Manuscript database
The Chesapeake Stormwater Network hosted a workshop on July, 2012 to discuss the potential nutrient reductions from emerging stormwater technologies including algal flow-way technologies (AFTs). Workshop participants recommended the Chesapeake Bay Program’s Water Quality Goal Implementation Team(WQ...
Buildings and community systems technology transfer support: Task 8, No. 1088
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
Information on items prepared for delivery by the contractor for the Industrial Energy Conservation Program are presented in this document. The information in the following brochures: Integrated Community Energy Systems (ICES); Energy Savings Through Automatic Thermostat Controls; Energy-Conserving Systems in Restaurants; Waste Heat Recovery: More Power from Fuels; and Fuel Cells: A New Kind of Power Plant is included. The Energy Efficiency Logo and 2 photographs are presented. A memo concerning ERDA energy data collection, dated November 4, 1976 and a letter about Goldmark Communications, Inc., dated August 16, 1976 are included. The Energy Efficiency Research pamphlet (EER) is reprinted.more » The following are also included: Working draft - Technology Transfer Section of Buildings Conservation Pad; Environmental Concerns/Industrial Growth - Speech to Industrial Council Workshop, Urban Land Institute, 1976 Fall Meeting, October 5, 1976; discussion on Liquid Nitrogen Freezing for Process Foods; and paper on Buildings and Community Systems Program Strategy. Information on high temperature recuperator systems; microwave/vacuum grain drying; Annual Cycle Energy Systems (ACES); Sambo's; Energy Outreach Program; and thermally activated heat pumps is also included. (MCW)« less
Thermal Barrier Coating Workshop, 1997
NASA Technical Reports Server (NTRS)
Brindley, William J. (Compiler)
1998-01-01
This document contains papers from the 1997 Thermal Barrier Coatings Workshop, sponsored by the TBC Interagency Coordination Committee. The Workshop was held in Fort Mitchell, Kentucky, May 19-21, 1997. The papers cover the topics of heat transfer and conductivity of thermal barrier coatings, failure mechanisms and characterization of the coatings as well as characterization of coating deposition methods. Speakers included research, development and user groups in academia, industry and government.
Tenth Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion, part 2
NASA Technical Reports Server (NTRS)
Williams, R. W. (Compiler)
1992-01-01
Presented here are 59 abstracts and presentations and three invited presentations given at the Tenth Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion held at the George C. Marshall Space Flight Center, April 28-30, 1992. The purpose of the workshop is to discuss experimental and computational fluid dynamic activities in rocket propulsion. The workshop is an open meeting for government, industry, and academia. A broad number of topics are discussed, including a computational fluid dynamic methodology, liquid and solid rocket propulsion, turbomachinery, combustion, heat transfer, and grid generation.
Eleventh Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion
NASA Technical Reports Server (NTRS)
Williams, R. W. (Compiler)
1993-01-01
Conference publication includes 79 abstracts and presentations and 3 invited presentations given at the Eleventh Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion held at George C. Marshall Space Flight Center, April 20-22, 1993. The purpose of the workshop is to discuss experimental and computational fluid dynamic activities in rocket propulsion. The workshop is an open meeting for government, industry, and academia. A broad number of topics are discussed including computational fluid dynamic methodology, liquid and solid rocket propulsion, turbomachinery, combustion, heat transfer, and grid generation.
Eleventh Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion, Part 1
NASA Technical Reports Server (NTRS)
Williams, Robert W. (Compiler)
1993-01-01
Conference publication includes 79 abstracts and presentations given at the Eleventh Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion held at the George C. Marshall Space Flight Center, April 20-22, 1993. The purpose of this workshop is to discuss experimental and computational fluid dynamic activities in rocket propulsion. The workshop is an open meeting for government, industry, and academia. A broad number of topics are discussed including computational fluid dynamic methodology, liquid and solid rocket propulsion, turbomachinery, combustion, heat transfer, and grid generation.
Telescopes in Education: the Little Thompson Observatory
NASA Astrophysics Data System (ADS)
Schweitzer, A. E.; Melsheimer, T. T.
2003-12-01
The Little Thompson Observatory is the first community-built observatory that is part of a high school and accessible to other schools remotely, via the Internet. This observatory is the second member of the Telescopes in Education (TIE) project. Construction of the building was done completely by volunteer labor, and first light occurred in May 1999. The observatory is located on the grounds of Berthoud High School in northern Colorado. We are grateful to have received an IDEAS grant to provide teacher training workshops for K-12 schools to make use of the observatory, including remote observing from classrooms. Students connect to the observatory over the Internet, and then receive the images back on their local computers. A committee of teachers and administrators from the Thompson School District selected these workshops to count towards Incentive Credits (movement on the salary schedule) because the course meets the criteria: "Learning must be directly transferable to the classroom with students and relate to standards, assessment and/or technology." Our program is also accredited by Colorado State University.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mankin, C.J.; Banken, M.K.
The Oklahoma Geological Survey (OGS), the Geological Information Systems department, and the School of Petroleum and Geological Engineering at the University of Oklahoma are engaging in a program to identify and address Oklahoma`s oil recovery opportunities in fluvial-dominated deltaic (FDD) reservoirs. This program includes the systematic and comprehensive collection and evaluation of information on all of Oklahoma`s FDD reservoirs and the recovery technologies that have been (or could be) applied to those reservoirs with commercial success. This data collection and evaluation effort will be the foundation for an aggressive, multifaceted technology transfer program that is designed to support all ofmore » Oklahoma`s oil industry, with particular emphasis on smaller companies and independent operators in their attempts to maximize the economic producibility of FDD reservoirs. Specifically, this project will identify all FDD oil reservoirs in the State; group those reservoirs into plays that have similar depositional and subsequent geologic histories; collect, organize and analyze all available data; conduct characterization and simulation studies on selected reservoirs in each play; and implement a technology transfer program targeted to the operators of FDD reservoirs to sustain the life expectancy of existing wells with the ultimate objective of increasing oil recovery. The elements of the technology transfer program include developing and publishing play portfolios, holding workshops to release play analyses and identify opportunities in each of the plays, and establishing a computer laboratory that is available for industry users.« less
76 FR 1136 - Electroshock Weapons Test and Measurement Workshop
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-07
... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Electroshock Weapons Test and Measurement Workshop AGENCY: National Institute of Standards and Technology (NIST), United States..., law enforcement, corrections, academia, military, test instrument manufacturers, etc.) of electroshock...
Research on non-destructive evaluation : workshop.
DOT National Transportation Integrated Search
2013-09-01
The workshop held on March 28 at the MDOT Aeronautics Auditorium in Lansing, : Michigan, was organized with the goal of providing an overview of readily available and : proven NDE technologies and the process of integrating these technologies into th...
Relativistic Gravitational Experiments in Space
NASA Technical Reports Server (NTRS)
Hellings, Ronald W. (Editor)
1989-01-01
The results are summarized of a workshop on future gravitational physics space missions. The purpose of the workshop was to define generic technological requirements for such missions. NASA will use the results to direct its program of advanced technology development.
1997 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift
NASA Technical Reports Server (NTRS)
Baize, Daniel G. (Editor)
1999-01-01
The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag, prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executives summaries for all the Aerodynamic Performance technology areas.
NASA Technical Reports Server (NTRS)
Baize, Daniel G. (Editor)
1999-01-01
The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in area of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodyamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.
NASA Technical Reports Server (NTRS)
Baize, Daniel G. (Editor)
1999-01-01
The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.
NASA Technical Reports Server (NTRS)
Baize, Daniel G. (Editor)
1999-01-01
The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Aerodynamic Performance Workshop on February 25-28, 1997. The workshop was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in area of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, Flight Controls, Supersonic Laminar Flow Control, and Sonic Boom Prediction. The workshop objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT Motion Simulator results were presented along with executive summaries for all the Aerodynamic Performance technology areas.
Nuclear thermal propulsion workshop overview
NASA Technical Reports Server (NTRS)
Clark, John S.
1991-01-01
NASA is planning an Exploration Technology Program as part of the Space Exploration Initiative to return U.S. astronauts to the moon, conduct intensive robotic exploration of the moon and Mars, and to conduct a piloted mission to Mars by 2019. Nuclear Propulsion is one of the key technology thrust for the human mission to Mars. The workshop addresses NTP (Nuclear Thermal Rocket) technologies with purpose to: assess the state-of-the-art of nuclear propulsion concepts; assess the potential benefits of the concepts for the mission to Mars; identify critical, enabling technologies; lay-out (first order) technology development plans including facility requirements; and estimate the cost of developing these technologies to flight-ready status. The output from the workshop will serve as a data base for nuclear propulsion project planning.
MSFC Skylab mission report: Saturn workshop
NASA Technical Reports Server (NTRS)
1974-01-01
The Skylab's Saturn Workshop mission performance is presented. Experiments were conducted to determine man's ability to live and work in space for extended periods, to make sun and earth investigations, and to advance science and technology in several areas of space applications. Performance is compared with design parameters, and problem causes and solutions are treated. The Saturn Workshop successfully performed its role and advanced the technology of space systems design.
Ruth, Janet M.; Manville, Albert; Larkin, Ron; Barrow, Wylie C.; Johnson-Randall, Lori; Dawson, Deanna K.; Diehl, Robert H.; Wang, Yufang; Sojda, Richard S.; Angryk, Rafal; Klaver, Robert W.; Mead, Reggie; Paxton, John; Heglund, Patricia J.; Kirsch, Eileen; Suarez, Manuel J.; Robinson, Larry; Gauthreaux, Sidney A.; Belser, Carroll G.; Franke, Steven J.; Bruderer, Bruno; Buler, Jeffrey J.; Moore, Frank R.; Mizrahi, David S.; Fogg, Robert; Kelly, T. Adam; Cryan, Paul; Crum, Tim; Schuur, Terry J.; Krueper, Dave; Diehl, Robb; Will, Tom; Ruth, Janet M.
2007-01-01
There was considerable interest in expanding the “radar collaborative” to include those agencies, organizations, and industries represented at the workshop. It was felt that the publication of the workshop proceedings, implementation of action items, and additional future meetings or workshops will be crucial in strengthening the “radar collaborative” effort and promoting the use of these valuable technologies for conserving migratory species.
ERIC Educational Resources Information Center
Ontario Dept. of Education, Toronto. School Planning and Building Research Section.
This document contains speeches and notes of workshop participants assembled to discuss the planning of Colleges of Applied Arts and Technology. The workshop was mainly concerned with learning resource centers, college student facilities, and planning for the future. Thirty-three selections cover such topics as appraisal of college development,…
ERIC Educational Resources Information Center
Advanced Tech. Environmental Education Center, Bettendorf, IA.
This workshop identified and defined environmental technology occupations, particularly at the technician level. The resulting report aims to enhance counselor, teacher, and student awareness of environmental careers at the technician level, and ultimately to address the environmental workforce needs of business, industry, and government by…
Advanced Technology for Engineering Education
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)
1998-01-01
This document contains the proceedings of the Workshop on Advanced Technology for Engineering Education, held at the Peninsula Graduate Engineering Center, Hampton, Virginia, February 24-25, 1998. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees came from NASA, other government agencies, industry and universities. The objectives of the workshop were to assess the status of advanced technologies for engineering education and to explore the possibility of forming a consortium of interested individuals/universities for curriculum reform and development using advanced technologies. The presentations covered novel delivery systems and several implementations of new technologies for engineering education. Certain materials and products are identified in this publication in order to specify adequately the materials and products that were investigated in the research effort. In no case does such identification imply recommendation or endorsement of products by NASA, nor does it imply that the materials and products are the only ones or the best ones available for this purpose. In many cases equivalent materials and products are available and would probably produce equivalent results.
Proceedings from the Workshop on Phytoremediation of Inorganic Contaminants
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brown, Jay Thatcher; Matthern, Gretchen Elise; Glenn, Anne Williams
The Metals and Radionuclides Product Line of the U.S. Department of Energy (DOE) Subsurface Contaminants Focus Area (SCFA) is responsible for the development of technologies and systems that reduce the risk and cost of remediation of radionuclide and hazardous metal contamination in soils and groundwater. The rapid and efficient remediation of these sites and the areas surrounding them represents a technological challenge. Phytoremediation, the use of living plants to cleanup contaminated soils, sediments, surface water and groundwater, is an emerging technology that may be applicable to the problem. The use of phytoremediation to cleanup organic contamination is widely accepted andmore » is being implemented at numerous sites. This workshop was held to initiate a discussion in the scientific community about whether phytoremediation is applicable to inorganic contaminants, such as metals and radionuclides, across the DOE complex. The Workshop on Phytoremediation of Inorganic Contaminants was held at Argonne National Laboratory from November 30 through December 2, 1999. The purpose of the workshop was to provide SCFA and the DOE Environmental Restoration Program with an understanding of the status of phytoremediation as a potential remediation technology for DOE sites. The workshop was expected to identify data gaps, technologies ready for demonstration and deployment, and to provide a set of recommendations for the further development of these technologies. More specifically, the objectives of the workshop were to: · Determine the status of the existing baseline, including technological maturation, · Identify areas for future potential research, · Identify the key issues and recommendations for issue resolution, · Recommend a strategy for maturing key aspects of phytoremediation, · Improve communication and collaboration among organizations currently involved in phytoremediation research, and · Identify technical barriers to making phytoremediation commercially successful in more areas.« less
75 FR 64258 - Cloud Computing Forum & Workshop II
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-19
... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Cloud Computing Forum... workshop. SUMMARY: NIST announces the Cloud Computing Forum & Workshop II to be held on November 4 and 5, 2010. This workshop will provide information on a Cloud Computing Roadmap Strategy as well as provide...
NASA Technical Reports Server (NTRS)
Ayon, Juan A. (Editor)
1992-01-01
A technology development program, Astrotech 21, is being proposed by NASA to enable the launching of the next generation of space astrophysical observatories during the years 1995-2015. Astrotech 21 is being planned and will ultimately be implemented jointly by the Astrophysics Division of the Office of Space Science and Applications and the Space Directorate of the Office of Aeronautics and Space Technology. A summary of the Astrotech 21 Optical Systems Technology Workshop is presented. The goal of the workshop was to identify areas of development within advanced optical systems that require technology advances in order to meet the science goals of the Astrotech 21 mission set, and to recommend a coherent development program to achieve the required capabilities.
Rocket Based Combined Cycle (RBCC) Propulsion Workshop, volume 2
NASA Technical Reports Server (NTRS)
Chojnacki, Kent T.
1992-01-01
The goal of the Rocket Based Combined Cycle (RBCC) Propulsion Technology Workshop, was to impart technology information to the propulsion community with respect to hypersonic combined cycle propulsion capabilities. The major recommendation resulting from this technology workshop was as follows: conduct a systems-level applications study to define the desired propulsion system and vehicle technology requirements for LEO launch vehicles. All SSTO and TSTO options using the various propulsion systems (airbreathing combined cycle, rocket-based combined cycle, and all rocket) must be considered. Such a study should be accomplished as soon as possible. It must be conducted with a consistent set of ground rules and assumptions. Additionally, the study should be conducted before any major expenditures on a RBCC technology development program occur.
Standard Modular Hydropower Technology Acceleration Workshop: Summary Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Smith, Brennan T.; DeNeale, Scott T.; Witt, Adam M.
In support of the Department of Energy (DOE) funded Standard Modular Hydropower (SMH) Technology Acceleration project, Oak Ridge National Laboratory (ORNL) staff convened with five small hydropower technology entrepreneurs on June 14 and 15, 2017 to discuss gaps, challenges, and opportunities for small modular hydropower development. The workshop was designed to walk through SMH concepts, discuss the SMH research vision, assess how each participant’s technology aligns with SMH concepts and research, and identify future pathways for mutually beneficial collaboration that leverages ORNL expertise and entrepreneurial industry experience. The goal coming out of the workshop is to advance standardized, scalable, modularmore » hydropower technologies and development approaches with sustained and open dialogue among diverse stakeholder groups.« less
The AGTSR consortium: An update
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fant, D.B.; Golan, L.P.
1995-10-01
The Advanced Gas Turbine Systems Research (AGTSR) program is a collaborative University-Industry R&D Consortium that is managed and administered by the South Carolina Energy R&D Center. AGTSR is a nationwide consortium dedicated to advancing land-based gas turbine systems for improving future power generation capability. It directly supports the technology-research arm of the ATS program and targets industry-defined research needs in the areas of combustion, heat transfer, materials, aerodynamics, controls, alternative fuels, and advanced cycles. The consortium is organized to enhance U.S. competitiveness through close collaboration with universities, government, and industry at the R&D level. AGTSR is just finishing its thirdmore » year of operation and is sponsored by the U.S. DOE - Morgantown Energy Technology Center. The program is scheduled to continue past the year 2000. At present, there are 78 performing member universities representing 36 states, and six cost-sharing U.S. gas turbine corporations. Three RFP`s have been announced and the fourth RFP is expected to be released in December, 1995. There are 31 research subcontracts underway at performing member universities. AGTSR has also organized three workshops, two in combustion and one in heat transfer. A materials workshop is in planning and is scheduled for February, 1996. An industrial internship program was initiated this past summer, with one intern positioned at each of the sponsoring companies. The AGTSR consortium nurtures close industry-university-government collaboration to enhance synergism and the transition of research results, accelerate and promote evolutionary-revolutionary R&D, and strives to keep a prominent U.S. industry strong and on top well into the 21st century. This paper will present the objectives and benefits of the AGTSR program, progress achieved to date, and future planned activity in fiscal year 1996.« less
Li'l Red Schoolhouse workshops
NASA Technical Reports Server (NTRS)
1993-01-01
Education specialists at Stennis conduct staff development workshops for elementary and secondary teachers of math, science and technology and other subjects as well as specialized workshops conducted in the NASA Li'l Red Schoolhouse.
Workshop on Particle Capture, Recovery and Velocity/Trajectory Measurement Technologies
NASA Technical Reports Server (NTRS)
Zolensky, Michael E. (Editor)
1994-01-01
A workshop on particle capture, recovery, and velocity/trajectory measurement technologies was held. The primary areas covered were: (1) parent-daughter orbit divergence; (2) trajectory sensing; (3) capture medium development: laboratory experiments, and (4) future flight opportunities.
ERIC Educational Resources Information Center
United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and the Pacific.
The workshop described in this report focused on uses of educational technology in the training and upgrading of teachers and on promoting the use of appropriate educational technology techniques by teachers. Experiences in the use of educational technology are described for each of the participating nations, i.e., Bangladesh, India, Indonesia,…
Proceedings of the Second Software Architecture Technology User Network (SATURN) Workshop
2006-08-01
Proceedings of the Second Software Architecture Technology User Network (SATURN) Workshop Robert L. Nord August 2006 TECHNICAL REPORT CMU...SEI-2006-TR-010 ESC-TR-2006-010 Software Architecture Technology Initiative Unlimited distribution subject to the copyright. This report was...Participants 3 3 Presentations 5 3.1 SATURN Opening Presentation: Future Directions of the Software Architecture Technology Initiative 5 3.2 Keynote
Natural resource workshop: Public/private partnership for sustainable use of natural resources
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1995-07-01
As part of an effort to shape Federal policy for environmentally sound, sustainable economic development, the White House Office of Science and Technology Policy sponsored a workshop in Boise, Idaho on February 1--2, 1995. The Boise Idaho workshop focused on the sustainable use of natural resources, a topic of considerable interest in Idaho. The workshop gave representatives from industry, academia, research, the public, and local and state government an opportunity to provide input to lawmakers and policymakers for establishing a National Environmental Technology Strategy to be issued by Earth Day, 1995.
Undergraduate Breakfast, Career Workshop, and Awards
NASA Astrophysics Data System (ADS)
2017-01-01
Undergraduate students can enjoy a hearty breakfast and learn about how to prepare for a wide variety of careers in physics outside of academia. Topics of this interactive workshop will include planning and self-assessment, inventorying transferable skills, finding out more about career opportunities, and successfully applying for jobs. Immediately following the workshop, top presenters from the Undergraduate Research/SPS sessions will be recognized. All presenters in the undergraduate sessions will receive certificates acknowledging their scientific accomplishments.
Workshop on Advanced Technologies for Planetary Instruments, part 1
NASA Technical Reports Server (NTRS)
Appleby, John F. (Editor)
1993-01-01
This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. This volume contains papers presented at the Workshop on Advanced Technologies for Planetary Instruments on 28-30 Apr. 1993. This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. Over the past several years, SDIO has sponsored a significant technology development program aimed, in part, at the production of instruments with these characteristics. This workshop provided an opportunity for specialists from the planetary science and DoD communities to establish contacts, to explore common technical ground in an open forum, and more specifically, to discuss the applicability of SDIO's technology base to planetary science instruments.
The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) and Small Business Innovation Research (SBIR) Programs hosted a workshop on October 7–8, 2008, at the EPA Region 2 office in New York City, New York. The goals of the workshop were to: (1) ...
Seventh workshop on the role of impurities and defects in silicon device processing
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1997-08-01
This workshop is the latest in a series which has looked at technological issues related to the commercial development and success of silicon based photovoltaic (PV) modules. PV modules based on silicon are the most common at present, but face pressure from other technologies in terms of cell performance and cell cost. This workshop addresses a problem which is a factor in the production costs of silicon based PV modules.
Developmental toxicity testing for safety assessment: new approaches and technologies
The ILSI Health and Environmental Sciences Institute's Developmental and Reproductive Toxicology Technical Committee held a 2-day workshop entitled "Developmental Toxicology-New Directions" in April 2009. The fourth session of this workshop focused on new approaches and technolog...
Highlights of the Transit Bus Technology Workshop - April 29-30, 1982
DOT National Transportation Integrated Search
1982-09-01
The Transit Bus Technology Workshop, held at the Transportation Systems Center on April 29-30, 1982, provided UMTA with current information on research, development, and technical assistance needed to improve the economy and performance of transit bu...
Workshop proceedings: Sensor systems for space astrophysics in the 21st century
NASA Technical Reports Server (NTRS)
1991-01-01
This proceedings provides a summary of the Astrotech 21 Sensor Technology Workshop. Topics covered include: high energy sensors, ultraviolet and visible sensors, direct infrared sensors, heterodyne submillimeter wave sensors, sensor readout electronics, and sensor cooler technology.
NASA Technical Reports Server (NTRS)
Paul, Lori (Editor)
1991-01-01
The Workshop on Advanced Network and Technology Concepts for Mobile, Micro, and Personal Communications was held at NASA's JPL Laboratory on 30-31 May 1991. It provided a forum for reviewing the development of advanced network and technology concepts for turn-of-the-century telecommunications. The workshop was organized into three main categories: (1) Satellite-Based Networks (L-band, C-band, Ku-band, and Ka-band); (2) Terrestrial-Based Networks (cellular, CT2, PCN, GSM, and other networks); and (3) Hybrid Satellite/Terrestrial Networks. The proceedings contain presentation papers from each of the above categories.
ERIC Educational Resources Information Center
Chapman, William E., Jr.
2009-01-01
The reputed benefits of using technology in schools have been the topic of many research studies. When the World Wide Workshop Foundation implemented their Globaloria program The reputed benefits of using technology in schools have been the topic of many research studies. When the World Wide Workshop Foundation implemented their Globaloria program…
Communications Technology and the Crisis in Education. A Report on the Bahia Workshop.
ERIC Educational Resources Information Center
Council on Higher Education in the American Republics, New York, NY.
A summary of the workshop convened in May 1971 in Salvador, Bahia, Brazil by the Council on Higher Education in the American Republics to assess current applications of communications technology for the improvement of educational systems in Latin America is given in this document. Against a background which includes: 1) technological asymmetry in…
Technology, Learning, and the Classroom: Longitudinal Evaluation of a Faculty Development Model
ERIC Educational Resources Information Center
Kaminski, Karen; Bolliger, Doris
2012-01-01
Technology, Learning, and the Classroom, a workshop designed to jump-start faculty's use of instructional technology in face-to-face classrooms, was offered as a week-long intensive workshop and once-a-week session over a semester. Faculty were interviewed five years after participation to determine the longitudinal effects, differences in opinion…
Controlled Structures Technology Steering Committee Workshop
NASA Technical Reports Server (NTRS)
1992-01-01
Viewgraphs on controlled structures technology presented at the steering committee workshop on 22-23 Jan. 1992 are included. Topics addressed include: interferometer testbed; middeck 0-gravity dynamics experiment; middeck active control experiment; multivariable identification for control; strain actuated aeroelastic control; sensor/actuator technology development; input command shaping; and other research projects. A description of the organization and committee are included.
NASA/HAA Advanced Rotorcraft Technology and Tilt Rotor Workshops. Volume 1: Executive Summary
NASA Technical Reports Server (NTRS)
1980-01-01
This presentation provides an overview of the NASA Rotorcraft Program as an introduction to the technical sessions of the Advanced Rotorcraft Technology Workshop. It deals with the basis for NASA's increasing emphasis on rotorcraft technology, NASA's research capabilities, recent program planning efforts, highlights of its 10-year plan and future directions and opportunities.
TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Donald Duttlinger
2001-11-01
The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions during Fiscal Year 2001 (FY01). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs). They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operatorsmore » and service companies working with the regional networks. The role of the national Headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies without direct contact to R&D efforts. This technical progress report summarizes PTTC's accomplishments during FY01, which lays the groundwork for further growth in the future. At a time of many industry changes and wide market movements, the organization itself is adapting to change. PTTC has built a reputation and expectation among producers and other industry participants to quickly distribute information addressing technical needs. The organization efficiently has an impact on business economics as the focus remains on proven applicable technologies, which target cost reduction and efficiency gains.« less
NASA Astrophysics Data System (ADS)
Sechler, Phares Lochiel Coleman
State departments of public instruction require that teachers periodically update their licenses throughout their teaching careers. Various professional development events such as in-service workshops, university offerings, and special innovative programs provide opportunities for novice and experienced teachers to grow professionally. The "Team Science" workshop was designed from models supported by research that described guidelines for successful workshop strategies. In evaluating the workshop, the question was asked "Why did not all teachers implement the ideas from the workshop in their science classrooms?" This study investigates the possible relationship between teacher personality characteristics and implementation of technology innovations. Team Science was an extensive workshop program planned to develop science teachers' expertise in using computer and video technology to teach in physical science, chemistry, and physics classrooms in rural school in North Carolina. Upon evaluating the four-year effort, it was found that the 23 participants implemented the technological strategies at various levels. At the higher end of the range of technology use, some teachers exhibited complete integration of the computers and interfacing devices into both the laboratory work and the classroom inquiry. At the lower end of the range, some teachers used the technology very little. The resulting question emerged from the data collected: Do specific teacher personality characteristics (independent variables) correlate with the degree of implementation (dependent variable) of the innovative ideas and tools used in the teacher's science classroom after the in-service workshop? To determine if there were any significant personality traits, each teacher was given five personality tests. The tests were Hunt's Conceptual Development Test, the Paragraph Completion Test; James Rest's Defining Issues Test; Simmons Personal Survey, an emotional tendency test; the Myers-Briggs Type Indicator; and Riggs and Enochs Self-Efficacy Test. The data were analyzed using descriptive statistics, multiple regression, and factor analysis to see what variables were predictors of implementation. The regression analysis revealed that subtests from Myers-Briggs Type Indicator, Simmons Personal Survey, Hunt's Paragraph Completion Test, and Rest's Defining Issues Test could be used to predict implementation. Factor analysis indicated teachers who implemented the technology were "risk takers" and "flexible planners."
NASA Technical Reports Server (NTRS)
Barnett, John W.
1991-01-01
Nuclear propulsion technology offers substantial benefits to the ambitious piloted and robotic solar system exploration missions of the Space Exploration Initiative (SEI). This paper summarizes a workshop jointly sponsored by NASA, DoE, and DoD to assess candidate nuclear electric propulsion technologies. Twenty-one power and propulsion concepts are reviewed. Nuclear power concepts include solid and gaseous fuel concepts, with static and dynamic power conversion. Propulsion concepts include steady state and pulsed electromagnetic engines, a pulsed electrothermal engine, and a steady state electrostatic engine. The technologies vary widely in maturity. The workshop review panels concluded that compelling benefits would accrue from the development of nuclear electric propulsion systems, and that a focused, well-funded program is required to prepare the technologies for SEI missions.
2016-10-01
workshop, and use case development for automated and autonomous systems for CSS. The scoping study covers key concepts and trends, a technology scan, and...requirements and delimiters for the selected technologies. The report goes on to present detailed use cases for two technologies of interest: semi...selected use cases . As a result of the workshop, the large list of technologies and applications from the scoping study was narrowed down to the top
Cornelius, Craig W; Heinrichs, Leroy; Youngblood, Patricia; Dev, Parvati
2007-01-01
Stanford University Medical Media and Information Technologies's technical workshop "Prototyping of Surgical Simulators using Open Source Simulation Software" was held in August 2006 at Stanford University. The objectives, program, and topics covered are presented in this short report.
The Dialectics Informing Identity in an Urban Youth Digital Storytelling Workshop
ERIC Educational Resources Information Center
DeGennaro, Donna
2008-01-01
This article examines an after-school program entitled Silk City Media Workshop. Briefly, the workshop engages youth in digital storytelling as a means of enhancing both their technology and literacy skills. Transcending these goals, this workshop also provides opportunities for youth to reveal multiple aspects of their unfolding identities as…
77 FR 15719 - Public Workshop to Seek Comment on Federal Conformity Assessment Guidance
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-16
... (NIST), Department of Commerce. ACTION: Notice of Public Workshop. SUMMARY: The U.S. Department of Commerce's (DOC) National Institute of Standards and Technology (NIST) will hold a free public workshop.... Eastern Time (ET) at NIST in Gaithersburg, Maryland. The purpose of the NIST public workshop is (1) to...
Seeking the Tricorder: Report on Workshops on Advanced Technologies for Life Detection
NASA Astrophysics Data System (ADS)
Reiss-Bubenheim, D.; Boston, P. J.; Partridge, H.; Lindensmith, C.; Nadeau, J. L.
2017-12-01
There's great excitement about life prospects on icy fluid-containing moons orbiting our Solar System's gas giant planets, newly discovered planet candidates and continuing long-term interest in possible Mars life. The astrobiology/planetary research communities require advanced technologies to explore and study both Solar System bodies and exoplanets for evidence of life. The Tricorder Workshop, held at Ames Research Center May 19-20, 2017, explored technology topics focused on non-invasive or minimally invasive methods for life detection. The workshop goal was to tease out promising ideas for low TRL concepts for advanced life detection technologies that could be applied to the surface and near-subsurface of Mars and Ocean Worlds (such as Europa and Enceladus) dominated by icy terrain. The workshop technology focus centered on mid-to-far term instrument concepts or other enabling technologies (e.g. robotics, machine learning, etc.) primarily for landed missions, which could detect evidence of extant, extinct and/or "weird" life including the notion of "universal biosignatures". Emphasis was placed on simultaneous and serial sample measurements using a suite of instruments and technological approaches with planetary protection in mind. A follow-on workshop, held July 24 at Caltech, sought to develop a generic flowchart of in situ observations and measurements to provide sufficient information to determine if extant life is present in an environment. The process didn't require participant agreement as to definition of extant life, but instead developed agreement on necessary observations and instruments. The flowchart of measurements was designed to maximize the number of simultaneous observations on a single sample where possible, serializing where necessary, and finally dividing it into parts for the most destructive analyses at the end. Selected concepts from the workshops outlined in this poster provide those technology areas necessary to solicit and develop for future life detection exploration via fly-by missions, orbiters, and landers.
Tenth Workshop for Computational Fluid Dynamic Applications in Rocket Propulsion, part 1
NASA Technical Reports Server (NTRS)
Williams, R. W. (Compiler)
1992-01-01
Experimental and computational fluid dynamic activities in rocket propulsion were discussed. The workshop was an open meeting of government, industry, and academia. A broad number of topics were discussed including computational fluid dynamic methodology, liquid and solid rocket propulsion, turbomachinery, combustion, heat transfer, and grid generation.
Rolling Contact Fatigue Workshop July 26-27, 2011
DOT National Transportation Integrated Search
2012-08-01
In July 2011, the Transportation Technology Center, Inc., coordinated the joint Federal Railroad Association/Association of American Railroads Workshop on Rolling Contact Fatigue (RCF). The workshop was held at the Congress Plaza Hotel in Chicago, IL...
NASA Lunar Dust Filtration and Separations Workshop Report
NASA Technical Reports Server (NTRS)
Agui, Juan H.; Stocker, Dennis P.
2009-01-01
NASA Glenn Research Center hosted a 2.5-day workshop, entitled "NASA Lunar Dust Filtration and Separations Workshop" at the Ohio Aerospace Institute in Cleveland, Ohio, on November 18 to 20, 2008. The purpose of the workshop was to address the issues and challenges of particulate matter removal from the cabin atmospheres in the Altair lunar lander, lunar habitats, and in pressurized rovers. The presence of lunar regolith dust inside the pressurized volumes was a theme of particular interest. The workshop provided an opportunity for NASA, industry experts, and academia to identify and discuss the capabilities of current and developing air and gas particulate matter filtration and separations technologies as they may apply to NASA s needs. A goal of the workshop was to provide recommendations for strategic research areas in cabin atmospheric particulate matter removal and disposal technologies that will advance and/or supplement the baseline approach for these future lunar surface exploration missions.
Mars exploration study workshop 2
NASA Astrophysics Data System (ADS)
Duke, Michael B.; Budden, Nancy Ann
1993-11-01
A year-long NASA-wide study effort has led to the development of an innovative strategy for the human exploration of Mars. The latest Mars Exploration Study Workshop 2 advanced a design reference mission (DRM) that significantly reduces the perceived high costs, complex infrastructure, and long schedules associated with previous Mars scenarios. This surface-oriented philosophy emphasizes the development of high-leveraging surface technologies in lieu of concentrating exclusively on space transportation technologies and development strategies. As a result of the DRM's balanced approach to mission and crew risk, element commonality, and technology development, human missions to Mars can be accomplished without the need for complex assembly operations in low-Earth orbit. This report, which summarizes the Mars Exploration Study Workshop held at the Ames Research Center on May 24-25, 1993, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues. The three position papers which were generated are included in section three of this publication.
Mars exploration study workshop 2
NASA Technical Reports Server (NTRS)
Duke, Michael B.; Budden, Nancy Ann
1993-01-01
A year-long NASA-wide study effort has led to the development of an innovative strategy for the human exploration of Mars. The latest Mars Exploration Study Workshop 2 advanced a design reference mission (DRM) that significantly reduces the perceived high costs, complex infrastructure, and long schedules associated with previous Mars scenarios. This surface-oriented philosophy emphasizes the development of high-leveraging surface technologies in lieu of concentrating exclusively on space transportation technologies and development strategies. As a result of the DRM's balanced approach to mission and crew risk, element commonality, and technology development, human missions to Mars can be accomplished without the need for complex assembly operations in low-Earth orbit. This report, which summarizes the Mars Exploration Study Workshop held at the Ames Research Center on May 24-25, 1993, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues. The three position papers which were generated are included in section three of this publication.
A system approach to archival storage
NASA Technical Reports Server (NTRS)
Corcoran, John W.
1991-01-01
The introduction and viewgraphs of a discussion on a system approach to archival storage presented at the National Space Science Data Center (NSSDC) Mass Storage Workshop is included. The use of D-2 iron particles for archival storage is discussed along with how acceleration factors relating short-term tests to archival life times can be justified. Ampex Recording Systems is transferring D-2 video technology to data storage applications, and encountering concerns about corrosion. To protect the D-2 standard, Battelle tests were done on all four tapes in the Class 2 environment. Error rates were measured before and after the test on both exposed and control groups.
NASA Technical Reports Server (NTRS)
1981-01-01
Data from LANDSAT, low altitude color aerial photography, and ground visits were combined and used to produce vegetation cover maps and to estimate productivity of range, woodland, and forest resources in northwestern Arizona. A planning session, two workshops, and four status reviews were held to assist technology transfer from NASA. Computer aided digital classification of LANDSAT data was selected as a major source of input data. An overview is presented of the data processing, data collection, productivity estimation, and map verification techniques used. Cost analysis and digital LANDSAT digital products are also considered.
After Globalization Future Security in a Technology Rich World
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gilmartin,T J
2001-08-17
Over the course of the year 2000, five workshops were conducted by the Center for Global Security Research at the Lawrence Livermore National Laboratory on threats to international security in the 2015 to 2020 timeframe due to the global availability of advanced technology. These workshops focused on threats that are enabled by nuclear, missile, and space technology; military technology; information technology; bio technology; and geo systems technology. The participants included US national leaders and experts from the Department of Energy National Laboratories; the Department of Defense: Army, Navy, Air Force, Office of the Secretary of Defense, Defense Threat Reduction Agency,more » and Defense Advanced Research Projects Agency; the Department of State, NASA, Congressional technical staff, the intelligence community, universities and university study centers, think tanks, consultants on security issues, and private industry. For each workshop the process of analysis involved identification and prioritization of the participants' perceived most severe threat scenarios (worst nightmares), discussion of the technologies which enabled those threats, and ranking of the technologies' threat potentials. The threats ranged from local/regional to global, from intentional to unintended to natural, from merely economic to massively destructive, and from individual and group to state actions. We were not concerned in this exercise with defining responses to the threats, although our assessment of each threat's severity included consideration of the ease or difficulty with which it might be executed or countered. At the concluding review, we brought the various workshops' participants together, added senior participant/reviewers with broad experience and national responsibility, and discussed the workshop findings to determine what is most certain or uncertain, and what might be needed to resolve our uncertainties. This paper summarizes the consenses and important variations of both the reviewers and the participants.« less
Refrigeration and air-conditioning technology workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lewis, P. J.; Counce, D. M.
1993-01-01
The Alternative Fluorocarbon Environmental Acceptability Study (AFEAS), a consortium of fluorocarbon manufacturers, and the US Department of Energy (DOE) are collaborating on a project to evaluate the energy use and global warming impacts of CFC alternatives. The goal of this project is to identify technologies that could replace the use of CFCs in refrigeration, heating, and air-conditioning equipment; to evaluate the direct impacts of chemical emissions on global warming; and to compile accurate estimates of energy use and, indirect CO{sub 2} emissions of substitute technologies. The first phase of this work focused on alternatives that could be commercialized before themore » year 2000. The second phase of the project is examining not-in-kind and next-generation technologies that could be developed to replace CFCs, HCFCs, and HFCs over a longer period. As part of this effort, Oak Ridge National Laboratory held a workshop on June 23--25, 1993. The preliminary agenda covered a broad range of alternative technologies and at least one speaker was invited to make a brief presentation at the workshop on each technology. Some of the invited speakers were unable to participate, and in a few cases other experts could not be identified. As a result, those technologies were not represented at the workshop. Each speaker was asked to prepare a five to seven page paper addressing six key issues concerning the technology he/she is developing. These points are listed in the sidebar. Each expert also spoke for 20 to 25 minutes at the workshop and answered questions from the other participants concerning the presentation and area of expertise. The primary goal of the presentations and discussions was to identify the developmental state of the technology and to obtain comparable data on system efficiencies. Individual papers are indexed separately.« less
Ready to learn physics: a team-based learning model for first year university
NASA Astrophysics Data System (ADS)
Parappilly, Maria; Schmidt, Lisa; De Ritter, Samantha
2015-09-01
Team-based learning (TBL) is an established model of group work which aims to improve students' ability to apply discipline-related content. TBL consists of a readiness assurance process (RAP), student groups and application activities. While TBL has not been implemented widely in science, technology, engineering and mathematics disciplines, it has been effective in improving student learning in other disciplines. This paper describes the incorporation of TBL activities into a non-calculus based introductory level physics topic—Physics for the Modern World. Students were given pre-class preparation materials and an individual RAP online test before the workshops. The pre-workshop individual RAP test ensured that all students were exposed to concept-based questions before their workshops and motivated them to use the preparatory materials in readiness for the workshop. The students were placed into random teams and during the first part of the workshop, the teams went through a subset of the quiz questions (team RAP test) and in the remaining time, teams completed an in-class assignment. After the workshop students were allowed another attempt at the individual RAP test to see if their knowledge had improved. The ability of TBL to promote student learning of key concepts was evaluated by experiment using pre- and post- testing. The students’ perception of TBL was monitored by discussion posts and survey responses. Finally, the ability of TBL to support peer-peer interaction was evaluated by video analysis of the class. We found that the TBL process improved student learning; students did interact with each other in class; and the students had a positive view of TBL. To assess the transferability of this model to other topics, we conducted a comparison study with an environmental science topic which produced similar results. Our study supports the use of this TBL model in science topics.
Space Mechanisms Technology Workshop
NASA Technical Reports Server (NTRS)
Oswald, Fred B. (Editor)
2002-01-01
The Mechanical Components Branch at NASA Glenn Research Center hosted a workshop on Tuesday, May 14, 2002, to discuss space mechanisms technology. The theme for this workshop was 'Working in the Cold,' a focus on space mechanisms that must operate at low temperatures. We define 'cold' as below -60C (210 K), such as would be found near the equator of Mars. However, we are also concerned with much colder temperatures such as in permanently dark craters of the Moon (about 40 K).
NASA workshop on impact damage to composites
NASA Technical Reports Server (NTRS)
Poe, C. C., Jr.
1991-01-01
A compilation of slides presented at the NASA Workshop on Impact Damage to Composites held on March 19 and 20, 1991, at the Langley Research Center, Hampton, Virginia is given. The objective of the workshop was to review technology for evaluating impact damage tolerance of composite structures and identify deficiencies. Research, development, design methods, and design criteria were addressed. Actions to eliminate technology deficiencies were developed. A list of those actions and a list of attendees are also included.
Radiation and Health: A Workshop for Science Educators
NASA Astrophysics Data System (ADS)
Krieger, Kenneth
2010-03-01
This workshop covers nuclear science and technology topics suitable for science teachers to use in grade 4-12 classes. Subjects included are Fundamentals of Radiation, Exposure to natural and man- made Radiation, Cellular Biology and Radiation Effects, Radioactive Waste Management, Health Physics and Radiation Physics, and Career possibilities in Nuclear Technology. Schools of participants will receive a working Geiger Counter. Workshop presenter is a TEA-approved CPE Provider. Limited to 20 participants - 3 hours - Cost 2.00
PREFACE: 14th Micromechanics Europe Workshop (MME'03)
NASA Astrophysics Data System (ADS)
Wolffenbuttel, R. F.
2004-09-01
This special issue of the Journal of Micromechanics and Microengineering is devoted to the 14th Micromechanics Europe Workshop (MME'03), which was held at Delft University of Technology, The Netherlands on 2-4 November 2003. Papers have been selected from this workshop for presentation in this special issue. After a careful review by the MME'03 programme committee, 53 submissions were selected for poster presentation at the workshop in addition to 6 invited presentations. These covered the many aspects of our exciting field: technology, simulation, system design, fabrication and characterization in a wide range of applications. These contributions confirm a trend from technology-driven towards application-driven technological research. This trend has become possible because of the availability of mature fabrication technologies for micromechanical structures and is reflected by the presentations of some of the invited speakers. There were invited lectures about applications in the medical field, automotive and copiers, which provide evidence of the relevance of our work in society. Nevertheless, development of technologies rightfully remains a core activity of this workshop. This applies to both the introduction of new technologies, as was reflected by invited presentations on new trends in RIE and nanotechnology, and the addressing of manufacturing issues using available techniques, which will be demonstrated to be crucial in automotive applications. Out of these 59 papers 21 have been selected for presentation in this special issue. Since the scope of the workshop is somewhat wider than that of the journal, selection was based not only on the quality of the work, but also on suitability for presentation in the journal. Moreover, at the workshop, student presentation of research at an early stage was strongly encouraged, whereas publication of work in this journal requires a more advanced level. I would like to express my appreciation for the outstanding efforts made by all involved in the workshop: the steering committee for its support, the programme committee for the review and the local organization for all the detailed planning required to make it both an interesting and enjoyable meeting. Last, but not least, I would like to thank the authors for preparing significant and exciting papers that reflect the progress made in the field of micromechanics and the 80 or so attendees for their enthusiastic participation.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brown, G.J.; McDevitt, M.A.; Schmidt, D.
1992-01-01
The University of Massachusetts Lowell (UML) (formerly University of Lowell) sponsored, along with the American Nuclear Society (ANS), a 5-day workshop entitled 'Understanding and Teaching about Nuclear Technology and Its Place in Our Society.' More than 30 middle and high school teachers from the New England area (Connecticut, New Hampshire, and Massachusetts) attended the workshop, which was held June 24 through 28, 1991. Based on this experience, and with the expectation of replicating if not improving upon initial success, plans are now under way to offer a similar workshop at UML from June 29 through July 3, 1992.
Second NASA Workshop on Wiring for Space Applications
NASA Technical Reports Server (NTRS)
1994-01-01
This document contains the proceedings of the Second NASA Workshop on Wiring for Space Applications held at NASA LeRC in Cleveland, OH, 6-7 Oct. 1993. The workshop was sponsored by NASA Headquarters Code QW Office of Safety and Mission Quality, Technical Standards Division and hosted by NASA LeRC, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry, and academia presented and discussed topics on arc tracking phenomena, wiring system design, insulation constructions, and system protection. Presentation materials provided by the various speakers are included in this document.
International Workshop on Gamma Aluminide Alloy Technology. Section Three
1997-04-18
Structure / Property Relationships General Mechanical Behavior Tensile Fracture Toughness Creep Fatigue; FCG, Inverse Ductility/FT Relationship...Workshop on Gamma Titanium Aluminide Alloy Technology. 1 May 1996-3 May 1996 The Topics covered include: Fundamental research issues for...understanding the emerging class of Gamma Titanium Aluminide Alloy Technologies 14. SUBJECT TERMS 15. NUMBER OF PAGES 16. PRICE CODE N/A 17. SECURITY
ERIC Educational Resources Information Center
State Univ. of New York, Potsdam. Coll. at Potsdam.
Proceedings of the North Country Workshop on Science, Technology, and the Undergraduate Curriculum are presented. The Sloan Foundation's call for reform of the liberal arts and coverage of mathematics, science, and technology is noted in welcoming remarks by State University of New York, Potsdam, President Humphrey Tonkin. Stephen H. Cutcliffe…
NASA Technical Reports Server (NTRS)
Beckenbach, E. S. (Editor)
1984-01-01
It is more important than ever that engineers have an understanding of the future needs of clinical and research medicine, and that physicians know somthing about probable future developments in instrumentation capabilities. Only by maintaining such a dialog can the most effective application of technological advances to medicine be achieved. This workshop attempted to provide this kind of information transfer in the limited field of diagnostic imaging. Biomedical research at the Jet Propulsion Laboratory is discussed, taking into account imaging results from space exploration missions, as well as biomedical research tasks based in these technologies. Attention is also given to current and future indications for magnetic resonance in medicine, high speed quantitative digital microscopy, computer processing of radiographic images, computed tomography and its modern applications, position emission tomography, and developments related to medical ultrasound.
Smoking cessation: Exploration of perceived technology-related information value.
Reychav, Iris; McHaney, Roger; Hirak, Eyal; Merker, Ben
2018-01-01
This study describes a unique approach to information transfer affecting the perceived value of this information and related impact on smoker behavior. Data were collected via survey, sampling approximately 120 participants. An online survey tool was used for the survey creation, data collection and monitoring. Another online tool was used by participants to create short animation videos as a means of increasing their engagement with information in an experiential fashion. Study findings included that the process experienced by the test group was influential and facilitated participants' change of mind regarding enrollment in a smoking cessation workshop. This was partly attributable to the IKEA effect. The study provides evidence that a change in habits crucial to improve health and enhance positive lifestyle choices can be stimulated through active engagement with artifact creation in a technology-mediated environment.
Point Focusing Thermal and Electric Applications Project. Volume 1: Executive summary
NASA Technical Reports Server (NTRS)
Landis, K. E. (Editor)
1979-01-01
Background and objectives used for the Workshop for Potential Military and Civil Users for Small Solar Thermal Electric Power Technologies are discussed. A summary of the results and conclusions developed at the workshop regarding small solar thermal electric power technologies is included.
15 CFR 1160.3 - Assistance to industrial technology partnerships.
Code of Federal Regulations, 2012 CFR
2012-01-01
... INNOVATION Promotion of Private Sector Industrial Technology Partnerships § 1160.3 Assistance to industrial...) Workshops. Upon request, the Secretary may hold workshops with representatives from the private sector and... information. Accordingly, the Department will develop and maintain a list of specific public and private...
15 CFR 1160.3 - Assistance to industrial technology partnerships.
Code of Federal Regulations, 2013 CFR
2013-01-01
... INNOVATION Promotion of Private Sector Industrial Technology Partnerships § 1160.3 Assistance to industrial...) Workshops. Upon request, the Secretary may hold workshops with representatives from the private sector and... information. Accordingly, the Department will develop and maintain a list of specific public and private...
15 CFR 1160.3 - Assistance to industrial technology partnerships.
Code of Federal Regulations, 2011 CFR
2011-01-01
... INNOVATION Promotion of Private Sector Industrial Technology Partnerships § 1160.3 Assistance to industrial...) Workshops. Upon request, the Secretary may hold workshops with representatives from the private sector and... information. Accordingly, the Department will develop and maintain a list of specific public and private...
Abnormal Condition Monitoring of Workpieces Based on RFID for Wisdom Manufacturing Workshops.
Zhang, Cunji; Yao, Xifan; Zhang, Jianming
2015-12-03
Radio Frequency Identification (RFID) technology has been widely used in many fields. However, previous studies have mainly focused on product life cycle tracking, and there are few studies on real-time status monitoring of workpieces in manufacturing workshops. In this paper, a wisdom manufacturing model is introduced, a sensing-aware environment for a wisdom manufacturing workshop is constructed, and RFID event models are defined. A synthetic data cleaning method is applied to clean the raw RFID data. The Complex Event Processing (CEP) technology is adopted to monitor abnormal conditions of workpieces in real time. The RFID data cleaning method and data mining technology are examined by simulation and physical experiments. The results show that the synthetic data cleaning method preprocesses data well. The CEP based on the Rifidi(®) Edge Server technology completed abnormal condition monitoring of workpieces in real time. This paper reveals the importance of RFID spatial and temporal data analysis in real-time status monitoring of workpieces in wisdom manufacturing workshops.
Abnormal Condition Monitoring of Workpieces Based on RFID for Wisdom Manufacturing Workshops
Zhang, Cunji; Yao, Xifan; Zhang, Jianming
2015-01-01
Radio Frequency Identification (RFID) technology has been widely used in many fields. However, previous studies have mainly focused on product life cycle tracking, and there are few studies on real-time status monitoring of workpieces in manufacturing workshops. In this paper, a wisdom manufacturing model is introduced, a sensing-aware environment for a wisdom manufacturing workshop is constructed, and RFID event models are defined. A synthetic data cleaning method is applied to clean the raw RFID data. The Complex Event Processing (CEP) technology is adopted to monitor abnormal conditions of workpieces in real time. The RFID data cleaning method and data mining technology are examined by simulation and physical experiments. The results show that the synthetic data cleaning method preprocesses data well. The CEP based on the Rifidi® Edge Server technology completed abnormal condition monitoring of workpieces in real time. This paper reveals the importance of RFID spatial and temporal data analysis in real-time status monitoring of workpieces in wisdom manufacturing workshops. PMID:26633418
Proceedings of the Workshop on Space Telerobotics, volume 1
NASA Technical Reports Server (NTRS)
Rodriguez, G. (Editor)
1987-01-01
These proceedings report the results of a workshop on space telerobotics, which was held at the Jet Propulsion Laboratory, January 20-22, 1987. Sponsored by the NASA Office of Aeronautics and Space Technology (OAST), the Workshop reflected NASA's interest in developing new telerobotics technology for automating the space systems planned for the 1990s and beyond. The workshop provided a window into NASA telerobotics research, allowing leading researchers in telerobotics to exchange ideas on manipulation, control, system architectures, artificial intelligence, and machine sensing. One of the objectives was to identify important unsolved problems of current interest. The workshop consisted of surveys, tutorials, and contributed papers of both theoretical and practical interest. Several sessions were held on the themes of sensing and perception, control execution, operator interface, planning and reasoning, and system architecture.
Mixed waste focus area alternative technologies workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Borduin, L.C.; Palmer, B.A.; Pendergrass, J.A.
1995-05-24
This report documents the Mixed Waste Focus Area (MWFA)-sponsored Alternative Technology Workshop held in Salt Lake City, Utah, from January 24--27, 1995. The primary workshop goal was identifying potential applications for emerging technologies within the Options Analysis Team (OAT) ``wise`` configuration. Consistent with the scope of the OAT analysis, the review was limited to the Mixed Low-Level Waste (MLLW) fraction of DOE`s mixed waste inventory. The Los Alamos team prepared workshop materials (databases and compilations) to be used as bases for participant review and recommendations. These materials derived from the Mixed Waste Inventory Report (MWIR) data base (May 1994), themore » Draft Site Treatment Plan (DSTP) data base, and the OAT treatment facility configuration of December 7, 1994. In reviewing workshop results, the reader should note several caveats regarding data limitations. Link-up of the MWIR and DSTP data bases, while representing the most comprehensive array of mixed waste information available at the time of the workshop, requires additional data to completely characterize all waste streams. A number of changes in waste identification (new and redefined streams) occurred during the interval from compilation of the data base to compilation of the DSTP data base with the end result that precise identification of radiological and contaminant characteristics was not possible for these streams. To a degree, these shortcomings compromise the workshop results; however, the preponderance of waste data was linked adequately, and therefore, these analyses should provide useful insight into potential applications of alternative technologies to DOE MLLW treatment facilities.« less
OAST Technology for the Future. Executive Summary
NASA Technical Reports Server (NTRS)
1988-01-01
NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on the In-Space Technology Experiments Program (IN-STEP) December 6-9, 1988, in Atlanta, Georgia. The purpose of this workshop was to identify and prioritize space technologies which are critical for future national space programs and which require validation in the space environment. A secondary objective was to review the current NASA (In-Reach) and Industry/University (Out-Reach) experiments. Finally, the aerospace community was requested to review and comment on the proposed plans for the continuation of the In-Space Technology Experiments Program. In particular, the review included the proposed process for focusing the next experiment selection on specific, critical technologies and the process for implementing the hardware development and integration on the Space Shuttle vehicle. The product of the workshop was a prioritized listing of the critical space technology needs in each of eight technology disciplines. These listings were the cumulative recommendations of nearly 400 participants, which included researchers, technologists, and managers from aerospace industries, universities, and government organizations.
Technology for Space Station Evolution. Volume 5: Structures and Materials/Thermal Control System
NASA Technical Reports Server (NTRS)
1990-01-01
NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on technology for space station evolution on 16-19 Jan. 1990. The purpose of this workshop was to collect and clarify Space Station Freedom technology requirements for evolution and to describe technologies that can potentially fill those requirements. These proceedings are organized into an Executive Summary and Overview and five volumes containing the Technology Discipline Presentations. Volume 5 consists of the technology discipline sections for Structures/Materials and the Thermal Control System. For each technology discipline, there is a level 3 subsystem description, along with papers.
Technology for Space Station Evolution. Volume 4: Power Systems/Propulsion/Robotics
NASA Technical Reports Server (NTRS)
1990-01-01
NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on technology for space station evolution on 16-19 Jan. 1990. The purpose of this workshop was to collect and clarify Space Station Freedom technology requirements for evolution and to describe technologies that can potentially fill those requirements. These proceedings are organized into an Executive Summary and Overview and five volumes containing the Technology Discipline Presentations. Volume 4 consists of the technology discipline sections for Power, Propulsion, and Robotics. For each technology discipline, there is a Level 3 subsystem description, along with the papers.
Workshop Proceedings: Sensor Systems for Space Astrophysics in the 21st Century, Volume 2
NASA Technical Reports Server (NTRS)
Wilson, Barbara A. (Editor)
1991-01-01
In 1989, the Astrophysics Division of the Office of Space Science and Applications initiated the planning of a technology development program, Astrotech 21, to develop the technological base for the Astrophysics missions developed in the period 1995 to 2015. The Sensor Systems for Space Astrophysics in the 21st Century Workshop was one of three Integrated Technology Planning workshops. Its objectives were to develop an understanding of the future comprehensive development program to achieve the required capabilities. Program plans and recommendations were prepared in four areas: x ray and gamma ray sensors, ultraviolet and visible sensors, direct infrared sensors, and heterodyne submillimeter wave sensors.
OAST Space Theme Workshop 1976
NASA Technical Reports Server (NTRS)
Sadin, S. R.
1977-01-01
Papers that provide a technical foundation including research and technology base candidates for each of six space themes - space power, space industrialization, search for extraterrestrial intelligence, exploration of the solar system, global service, and advanced transportation systems - are presented. The material is mainly intended for further use by workshop participants and NASA elements concerned with space research and technology. While the data presented do not represent official plans or positions, they are part of the process of evolving such plans and positions. The information contained reflects the efforts of workshop participants and should be an aid in the successful implementation and execution of the Agency's near- and far-term advanced technology program.
NASA Technical Reports Server (NTRS)
Imhoff, Marc L.; Rosenquist, A.; Milne, A. K.; Dobson, M. C.; Qi, J.
2000-01-01
An International workshop was held to address how remote sensing technology could be used to support the environmental monitoring requirements of the Kyoto Protocol. An overview of the issues addressed and the findings of the workshop are discussed.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-07
... Government's role in sponsoring important basic and applied research and development. The workshop will also... Office (NCO) for Networking and Information Technology Research and Development (NITRD). ACTION: Notice..., 2011. SUMMARY: Representatives from Federal research agencies, private industry, and academia will...
2017 NREL Photovoltaic Reliability Workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurtz, Sarah
NREL's Photovoltaic (PV) Reliability Workshop (PVRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology -- both critical goals for moving PV technologies deeper into the electricity marketplace.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-14
... (AERIS) User Needs Workshop; Notice of Public Meeting AGENCY: Research and Innovative Technology... transformative capabilities of wireless technology to make surface transportation safer, smarter, and greener... significant environmental benefits. The AERIS Transformative Concepts include: (1) Eco-signal operations, (2...
The 1988 Goddard Space Flight Center Battery Workshop
NASA Technical Reports Server (NTRS)
Yi, Thomas Y. (Editor)
1993-01-01
This document contains the proceedings of the 21st annual Battery Workshop held at Goddard Space Flight Center, Greenbelt, Maryland on November 1-3, 1988. The Workshop attendees included manufacturers, users, and government representatives interested in the latest developments in battery technology as they relate to high reliability operations and aerospace use. The subjects covered included battery testing methodologies and criteria, life testing of nickel-cadmium cells, testing and operation of nickel-hydrogen batteries in low earth orbit, and nickel-hydrogen technology issues and concerns.
The 1993 NASA Aerospace Battery Workshop
NASA Technical Reports Server (NTRS)
Brewer, Jeffrey C. (Compiler)
1994-01-01
This document contains the proceedings of the 26th annual NASA Aerospace Battery Workshop, hosted by the Marshall Space Flight Center on 16-18 Nov. 1993. The workshop was attended by scientists and engineers from various agencies of the U.S. Government, aerospace contractors, and battery manufacturers, as well as international participation in like kind from a number of countries around the world. The subjects covered included nickel-cadmium, nickel-hydrogen, nickel-metal hydride, and lithium based technologies, as well as advanced technologies including various bipolar designs.
NASA Astrophysics Data System (ADS)
McNeal, K.; Buell, R.; Eiland, L.
2009-12-01
Teacher professional development centered about the Geosciences is necessary in order to train K-12 teachers about this science field and to effectively educate K-12 students about Earth processes. The partnership of industries, universities, and K-12 schools is a collaborative pathway to support these efforts by providing teachers access to technology, inquiry-based learning, and authentic field experiences within the Geosciences context. This research presents the results of Project SMARTER (Science and Mathematics Advancement and Reform utilizing Technology and Enhanced Resources), a co-lead industry-university partnership and teacher professional development workshop program that focused on technology and inquiry-based learning in the Geosciences. The workshop included fifteen teachers from five distressed counties in Mississippi as defined by the Appalachian Regional Commission. Three (one science, once math, one technology) 7-12 grade teachers were selected from each school district and worked together during activities as a team to foster a cooperative learning experience. The two week workshop trained teachers on the use of a variety of technologies including: Vernier Probes and software, TI-calculators and presenter, Mimio Boards, GPS receivers, Google Earth, Excel, PowerPoint, projectors, and the use of historic geologic datasets. Furthermore, teachers were trained on proper field collection techniques, the use of Hach Kits and field probes, and the interpretation of geologic data. Each daily program incorporated the use of technology-rich and inquiry-based activities into one of the five Earth spheres: atmosphere, lithosphere, biosphere, hydrosphere, and anthrosphere. Results from the pre-post technology attitude survey showed that participating teachers significantly (p < 0.05) increased their confidence level in using technology. Furthermore, all participants self-reflected that the workshop both increased their interest in the Geosciences and their plans to integrate technology in future classroom activities. Qualitative responses from daily feedback forms and journal entries indicated that participating teachers were enthusiastic about inquiry-, technology-, and field-based learning activities and were willing to incorporate cross-discipline lesson plans. Evaluation of final lesson plans developed by the teachers during the workshop combined with follow-up classroom visits illustrated that the teachers appropriately developed classroom lessons to incorporate inquiry and technology and that they successfully implemented these lesson plans in their own classroom as a direct result of participating in workshop activities.
Description and evaluation of the information transfer workshop series "Coal hydrology in Virginia"
Hufschmidt, Peter W.
1984-01-01
A series of workshops was conducted in September, 1982, by staff of the Virginia Office, Mid-Atlantic District of the U.S.-Geological Survey for the benefit of coal operators, consultants, and resource managers in the coal-producing area of southwest Virginia. The purpose of the workshop series was to present hydrologic information and data by the U.S. Geological Survey collected during four years of study of the. coal hydrology of Virginia. The workshop series was held one day a week for three weeks at two locations within southwest Virginia in order to reduce travel time and overnight travel costs for participants. Results of an independently conducted questionnaire indicate the series was a success. The report summarizes the workshop preparation, organization, and presentation, and gives general conclusions and suggestions for those interested in conducting workshops.
Incorporating Bioenergy in Sustainable Landscape Designs Workshop Two: Agricultural Landscapes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Negri, M. Cristina; Ssegane, H.
The Bioenergy Technologies Office hosted two workshops on Incorporating Bioenergy in Sustainable Landscape Designs with Oak Ridge and Argonne National Laboratories in 2014. The second workshop focused on agricultural landscapes and took place in Argonne, IL from June 24—26, 2014. The workshop brought together experts to discuss how landscape design can contribute to the deployment and assessment of sustainable bioenergy. This report summarizes the discussions that occurred at this particular workshop.
EM-21 Retrieval Knowledge Center: Waste Retrieval Challenges
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fellinger, Andrew P.; Rinker, Michael W.; Berglin, Eric J.
EM-21 is the Waste Processing Division of the Office of Engineering and Technology, within the U.S. Department of Energy’s (DOE) Office of Environmental Management (EM). In August of 2008, EM-21 began an initiative to develop a Retrieval Knowledge Center (RKC) to provide the DOE, high level waste retrieval operators, and technology developers with centralized and focused location to share knowledge and expertise that will be used to address retrieval challenges across the DOE complex. The RKC is also designed to facilitate information sharing across the DOE Waste Site Complex through workshops, and a searchable database of waste retrieval technology information.more » The database may be used to research effective technology approaches for specific retrieval tasks and to take advantage of the lessons learned from previous operations. It is also expected to be effective for remaining current with state-of-the-art of retrieval technologies and ongoing development within the DOE Complex. To encourage collaboration of DOE sites with waste retrieval issues, the RKC team is co-led by the Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL). Two RKC workshops were held in the Fall of 2008. The purpose of these workshops was to define top level waste retrieval functional areas, exchange lessons learned, and develop a path forward to support a strategic business plan focused on technology needs for retrieval. The primary participants involved in these workshops included retrieval personnel and laboratory staff that are associated with Hanford and Savannah River Sites since the majority of remaining DOE waste tanks are located at these sites. This report summarizes and documents the results of the initial RKC workshops. Technology challenges identified from these workshops and presented here are expected to be a key component to defining future RKC-directed tasks designed to facilitate tank waste retrieval solutions.« less
ERIC Educational Resources Information Center
Collis, Betty, Ed.; And Others
This document contains 21 papers from an international workshop designed to facilitate the exchange of ideas concerning the use of information technology in teacher education among experts from Central, Eastern, and Western Europe. The papers include: (1) "Communication and Information Technologies as Change Agents" (Jef Moonen); (2)…
DOT National Transportation Integrated Search
1979-07-01
The purpose of the meetings was to explore the implications of technological change in the U.S. automotive industry in support of improved policy formulation to meet emerging national needs. Five workshops were conducted in the following areas: (1) M...
Photovoltaic Module Reliability Workshop 2011: February 16-17, 2011
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurtz, S.
2013-11-01
NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.
Photovoltaic Module Reliability Workshop 2014: February 25-26, 2014
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurtz, S.
2014-02-01
NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.
Photovoltaic Module Reliability Workshop 2013: February 26-27, 2013
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurtz, S.
2013-10-01
NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.
Photovoltaic Module Reliability Workshop 2010: February 18-19, 2010
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurtz, J.
2013-11-01
NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.
The Market for Educational Software.
ERIC Educational Resources Information Center
Harvey, James, Ed.
This report summarizes one of a series of workshops organized by RAND's Critical Technologies Institute, on behalf of the U.S. Department of Education, to take advantage of the experience of those already implementing new technologies in the schools. The workshop consisted chiefly of dialogues with educators and experts from the private sector who…
2016 NREL Photovoltaic Module Reliability Workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurtz, Sarah
NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology - both critical goals for moving PV technologies deeper into the electricity marketplace.
2015 NREL Photovoltaic Module Reliability Workshops
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurtz, Sarah
NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.
The Two Ts: Teaching and Technology
ERIC Educational Resources Information Center
Flannery, Maura C.
2004-01-01
A professor of Biology shares his experience at the BioQUEST workshop, which he attended. He talks about the BioQUEST Curriculum Consortium, which is a large-scale college biology project, focusing on active learning strategies, and the use of technology in teaching. The approaches presented at the workshop are described.
The impact of the care equity project with community/public health nursing students.
Kamau-Small, Sylvia; Joyce, Barbara; Bermingham, Neysa; Roberts, Jada; Robbins, Curtis
2015-01-01
The purpose of this article is to report on the evaluation process of a multi-disciplinary interactive teaching-learning workshop implemented in a college of nursing baccalaureate program. A 6-hr workshop on cultural humility and care equity was implemented using educational theater to bring clinical situations involved in community/public health practice into the classroom. One hundred and forty-nine students participated in the workshop. Stages of Change (Prochaska and DiClemente [2005] Handbook of psychotherapy integration. New York: Oxford University Press) and the Learning Transfer Barriers Framework (Price, Miller, Rahm, Brace, & Larson [2010] Journal of Continuing Education in the Health Professions, 30, 237-245.) provided conceptual underpinnings for project evaluation. Nursing students completed a quiz, post-workshop online surveys at 2 and 8 weeks, and a clinical application report (CAR). Survey data provided information on barriers to the transfer of knowledge from theory class to the clinical setting. Qualitative methods were used to audit the CARs. Each CAR was independently reviewed to determine the Stage of Change reflected in the narrative. Workshop evaluation outcomes provide evidence that cultural humility skill building has created behavior change in clinical practice for new health care community/public health nursing providers. © 2014 Wiley Periodicals, Inc.
1997 DOE technical standards program workshop: Proceedings
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1997-10-01
The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. Themore » workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.« less
Theoretical Problems in High Resolution Solar Physics, 2
NASA Technical Reports Server (NTRS)
Athay, G. (Editor); Spicer, D. S. (Editor)
1987-01-01
The Science Working Group for the High Resolution Solar Observatory (HRSO) laid plans beginning in 1984 for a series of workshops designed to stimulate a broadbased input from the scientific community to the HRSO mission. These workshops have the dual objectives of encouraging an early start on the difficult theoretical problems in radiative transfer, magnetohydrodynamics, and plasma physics that will be posed by the HRSO data, and maintaining current discussions of results in high resolution solar studies. This workshop was the second in the series. The workshop format presented invited review papers during the formal sessions and contributed poster papers for discussions during open periods. Both are presented.
76 FR 14010 - Public Workshop: Debt Collection 2.0: Protecting Consumers as Technologies Change
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-15
...The FTC announces that it will hold a public workshop on April 28, 2011, to address consumer protection issues that have arisen as debt collectors avail themselves of advances in technology. The workshop will explore developments in technology that debt collectors use to gather, store, and manage information about consumers; to comply with the law; to communicate with consumers; and to receive payment. The workshop will provide an opportunity for government regulators, industry members, technologists, consumer advocates, and researchers, to discuss the costs and benefits of these technologies for debt collectors and consumers. It will also address whether and how collectors may use such technologies consistent with applicable laws, including the Fair Debt Collection Practices Act and Section 5 of the FTC Act, what consumer protection concerns arise from use of these technologies, and what actions, if any, the Commission and other policymakers should take to respond to those concerns. This notice poses a series of questions on which the Commission seeks comment. The event is open to the public, and there is no fee for attendance. For admittance to the workshop, all attendees will be required to show a valid form of government-issued photo identification, such as a driver's license. Additional information about the workshop will be posted on the FTC's Web site at: http:// www.ftc.gov/bcp/workshops/debtcollectiontech/index.shtml. Date and Location: The workshop will be held on April 28, 2011, from 8:30 a.m. to 5:30 p.m., at the Federal Trade Commission's Satellite Building Conference Center, located at 601 New Jersey Avenue, NW., Washington, DC. Workshop Agenda: Additional information, including an agenda and panelist biographies, will be posted on the FTC's Web site at http:// www.ftc.gov/bcp/workshops/debtcollectiontech/index.shtml. Public Comments: Interested parties are invited to submit written comments electronically or in paper form, by following the instructions in the Instructions For Filing Comments part of the SUPPLEMENTARY INFORMATION section below. Comments filed in electronic form should be submitted by using the following Web link: https:// ftcpublic.commentworks.com/ftc/debtcollecttechworkshop, and following the instructions on the Web-based form. Comments in paper form should be mailed or delivered to the following address: Federal Trade Commission, Office of the Secretary, Room H-113 (Annex F), 600 Pennsylvania Avenue, NW., Washington, DC 20580, in the manner detailed in the SUPPLEMENTARY INFORMATION section below. To be considered in preparation for the workshop, comments must be received by Thursday, April 7, 2011. However, comments will be accepted through Friday, May 27, 2011. Requests to Participate as Workshop Panelists: FTC staff will identify and invite individuals with relevant expertise to participate as panelists. In addition, the FTC staff may invite other persons to participate as panelists who submit requests in response to this Federal Register notice. Requests to participate as panelists in the workshop must be received on or before 5 p.m. EST, Tuesday, March 22, 2011. Persons filing requests to participate as panelists will be notified whether they have been selected on or before Wednesday, March 31, 2011. For further instructions, please see the ``Requests to Participate as Workshop Panelists'' section under SUPPLEMENTARY INFORMATION below.
First NASA Workshop on Wiring for Space Applications
NASA Technical Reports Server (NTRS)
Hammond, Ahmad (Compiler); Stavnes, Mark W. (Compiler)
1994-01-01
This document contains the proceedings of the First NASA Workshop on Wiring for Space Applications held at NASA Lewis Research Center in Cleveland, OH, July 23-24, 1991. The workshop was sponsored by NASA Headquarters Code QE Office of Safety and Mission Quality, Technical Standards Division and hosted by the NASA Lewis Research Center, Power Technology Division, Electrical Components and Systems Branch. The workshop addressed key technology issues in the field of electrical power wiring for space applications. Speakers from government, industry and academia presented and discussed topics on arc tracking phenomena, wiring applications and requirements, and new candidate insulation materials and constructions. Presentation materials provided by the various speakers are included in this document.
Closed-Cycle, Frequency-Stable CO2 Laser Technology
NASA Technical Reports Server (NTRS)
Batten, Carmen E. (Editor); Miller, Irvin M. (Editor); Wood, George M., Jr. (Editor); Willetts, David V. (Editor)
1987-01-01
These proceedings contain a collection of papers and comments presented at a workshop on technology associated with long-duration closed-cycle operation of frequency-stable, pulsed carbon dioxide lasers. This workshop was held at the NASA Langley Research Center June 10 to 12, 1986. The workshop, jointly sponsored by the National Aeronautics and Space Administration (NASA) and the Royal Signals and Radar Establishment (RSRE), was attended by 63 engineers and scientists from the United States and the United Kingdom. During the 2 1/2 days of the workshop, a number of issues relating to obtaining frequency-stable operation and to the catalytic control of laser gas chemistry were discussed, and specific recommendations concerning future activities were drafted.
Overview of NASA Glenn Seal Project
NASA Technical Reports Server (NTRS)
Steinetz, Bruce M.
2007-01-01
NASA Glenn hosted the Seals/Secondary Air System Workshop on November 14-15, 2006. At this workshop NASA and our industry and university partners shared their respective seal technology developments. We use these workshops as a technical forum to exchange recent advancements and "lessons-learned" in advancing seal technology and solving problems of common interest. As in the past we are publishing the presentations from this workshop in two volumes. Volume I will be publicly available and individual papers will be made available on-line through the web page address listed at the end of this presentation. Volume II will be restricted as Sensitive But Unclassified (SBU) under International Traffic and Arms Regulations (ITAR).
TARGETED TECHNOLOGY TRANSFER TO US INDEPENDENTS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Donald F. Duttlinger; E. Lance Cole
2005-01-01
The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of assisting U.S. independent oil and gas producers with timely, informed technology decisions during Fiscal Year 2004 (FY04). PTTC has active grassroots programs through its 10 Regional Lead Organizations (RLOs) and 2 satellite offices. They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, technical publications and other cooperative outreach efforts. PTTC's Headquarters (HQ) staff receives direction from a National Board of Directors predominantly comprised ofmore » American natural gas and oil producers to plan and manage the overall technology transfer program. PTTC HQ implements a comprehensive communications program by interconnecting the talents of the National Board, 10 Regional Producer Advisory Groups (PAG) and the RLOs with industry across the U.S. PTTC effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy, namely the Strategic Center for Natural Gas and Oil with state and industry contributions to share application of upstream technologies. Ultimately, these efforts factor in to provide a safe, secure and reliable energy supply for American consumers. This integrated resource base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results regarding domestic production figures. PTTC is increasingly recognized as a critical resource for information and access to technologies by providing direct contact with research, development and demonstration (RD&D) results. A key to the program is demonstrating proven technologies that can be applied broadly and rapidly. This technical progress report summarizes PTTC's accomplishments during FY04. Activities remained at high levels. Board and staff interaction has defined strategic thrusts to further outreach. Networking, involvement in technical activities and an active exhibit schedule are increasing PTTC's sphere of influence with both producers and the service sector. PTTC's reputation for unbiased bottom line information stimulates cooperative ventures with other organizations. Efforts to build the contact database and a growing E-mail Technology Alert service are expanding PTTC's audience.« less
OAST Technology for the Future. Volume 3 - Critical Technologies, Themes 5-8
NASA Technical Reports Server (NTRS)
1988-01-01
NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on the In-Space Technology Experiments Program IN-STEP) December 6-9, 1988, in Atlanta, Georgia. The purpose of this workshop was to identify and prioritize space technologies which are critical for future national space programs and which require validation in the 5 ace environment. A secondary objective was to review the current NASA (In-Reach and Industry/University (Out-Reach) experiments. Finally, the aerospace community was requested to review and comment on the proposed plans for the continuation of the In-Space Technology Experiments Program. In particular, the review included the proposed process for focusing the next experiment selection on specific, critical technologies and the process for implementing the hardware development and integration on the Space Shuttle vehicle. The product of the workshop was a prioritized listing of the critical space technology needs in each of eight technology disciplines. These listings were the cumulative recommendations of nearly 400 participants, which included researchers, technologists, and managers from aerospace industries, universities, and government organizations.
OAST Technology for the Future. Volume 2 - Critical Technologies, Themes 1-4
NASA Technical Reports Server (NTRS)
1988-01-01
NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on the In-Space Technology Experiments Program IN-STEP) December 6-9, 1988, in Atlanta, Georgia. The purpose of this workshop was to identify and prioritize space technologies which are critical for future national space programs and which. require validation in the space environment. A secondary objective was to review the current NASA (InReach) and Industry/University (Out-Reach) experiments. Finally, the aerospace community was requested to review and comment on the proposed plans for the continuation of the In-Space Technology Experiments Program. In particular, the review included the proposed process for focusing the next experiment selection on specific, critical technologies and the process for implementing the hardware development and integration on the Space Shuttle vehicle. The product of the workshop was a prioritized listing of the critical space technology needs in each of eight technology disciplines. These listings were the cumulative recommendations of nearly 400 participants, which included researchers, technologists, and managers from aerospace industries, universities, and government organizations.
NASA Astrophysics Data System (ADS)
Duke, M. B.; Budden, N. A.
1993-11-01
This report, which summarizes the Mars Exploration Study Workshop II, provides an overview of the status of the Mars Exploration Study, material presented at the workshop, and discussions of open items being addressed by the study team. The workshop assembled three teams of experts to discuss cost, dual-use technology, and international involvement, and to generate a working group white paper addressing these issues.
Valencia-Vázquez, Roberto; Pérez-López, Maria E; Vicencio-de-la-Rosa, María G; Martínez-Prado, María A; Rubio-Hernández, Rubén
2014-09-01
As society evolves its welfare level increases, and as a consequence the amount of municipal solid waste increases, imposing great challenges to municipal authorities. In developed countries, municipalities have established integrated management schemes to handle, treat, and dispose of municipal solid waste in an economical and environmentally sound manner. Municipalities of developing and transition countries are not exempted from the challenges involving municipal solid waste handling, but their task is not easy to accomplish since they face budget deficits, lack of knowledge, and deficiencies in infrastructure and equipment. In the northern territory of Mexico, the municipality of Durango is facing the challenge of increased volumes of waste with a lack of adequate facilities and infrastructure. This article analyses the evolution of the municipal solid waste management of Durango city, which includes actions such as proper facilities construction, equipment acquisition, and the implementation of social programmes. The World Bank, offering courses to municipal managers on landfill operation and waste management, promoted the process of knowledge and technology transfer. Thereafter, municipal authorities attended regional and some international workshops on waste management. In addition they followed suggestions of international contractors and equipment dealers with the intention to improve the situation of the waste management of the city. After a 15-year period, transfer of knowledge and technology resulted in a modern municipal solid waste management system in Durango municipality. The actual system did not reach the standard levels of an integrated waste management system, nevertheless, a functional evaluation shows clear indications that municipality actions have put them on the right pathway. © The Author(s) 2014.
NASA Technical Reports Server (NTRS)
1990-01-01
NASA's Office of Aeronautics and Space Technology conducted a workshop on technology for space station evolution 16-19 Jan. 1990. The purpose of the workshop was to collect and clarify Space Station Freedom technology requirements for evolution and to describe technologies that can potentially fill those requirements. These proceedings are organized into an Executive Summary and Overview and five volumes containing the Technology Discipline Presentations. Volume 2 consists of the technology discipline sections for the Data Management System and the Environmental Control and Life Support Systems. For each technology discipline, there is a Level 3 subsystem description, along with the invited papers.
Technology for Space Station Evolution. Volume 3: EVA/Manned Systems/Fluid Management System
NASA Technical Reports Server (NTRS)
1990-01-01
NASA's Office of Aeronautics and Space Technology (OAST) conducted a workshop on technology for space station evolution 16-19 Jan. 1990 in Dallas, Texas. The purpose of this workshop was to collect and clarify Space Station Freedom technology requirements for evolution and to describe technologies that can potentially fill those requirements. These proceedings are organized into an Executive Summary and Overview and five volumes containing the Technology Discipline Presentations. Volume 3 consists of the technology discipline sections for Extravehicular Activity/Manned Systems and the Fluid Management System. For each technology discipline, there is a Level 3 subsystem description, along with the papers.
76 FR 13984 - Cloud Computing Forum & Workshop III
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-15
... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Cloud Computing Forum... public workshop. SUMMARY: NIST announces the Cloud Computing Forum & Workshop III to be held on April 7... provide information on the NIST strategic and tactical Cloud Computing program, including progress on the...
2009 Human Factors and Roadway Safety Workshop : Opening Session [SD .WMV (720x480/29fps/546.0 MB)
DOT National Transportation Integrated Search
2009-11-05
Iowa Department of Transportation Research and Technology Bureau video presentation from the 2009 human factors and roadway safety workshop session titled: 2009 Human Factors and Roadway Safety Workshop Opening Session : Sandra Larson, director, Iowa...
Report of the In Situ Resources Utilization Workshop
NASA Technical Reports Server (NTRS)
Fairchild, Kyle (Editor); Mendell, Wendell W. (Editor)
1988-01-01
The results of a workshop of 50 representatives from the public and private sector which investigated the potential joint development of the key technologies and mechanisms that will enable the permanent habitation of space are presented. The workshop is an initial step to develop a joint public/private assessment of new technology requirements of future space options, to share knowledge on required technologies that may exist in the private sector, and to investigate potential joint technology development opportunities. The majority of the material was produced in 5 working groups: (1) Construction, Assembly, Automation and Robotics; (2) Prospecting, Mining, and Surface Transportation; (3) Biosystems and Life Support; (4) Materials Processing; and (5) Innovative Ventures. In addition to the results of the working groups, preliminary technology development recommendations to assist in near-term development priority decisions are presented. Finally, steps are outlined for potential new future activities and relationships among the public, private, and academic sectors.
NASA Astrophysics Data System (ADS)
Kosten, Lora Bechard
The literature suggests that parental involvement in schools results in positive changes in students and that schools need to provide opportunities for parents to share in the learning process. Workshops are an effective method of engaging parents in the education of their children. This dissertation studies the effects of voluntary Family Science and Technology Workshops on elementary children's science interest and achievement, as well as on parents' collaboration in their child's education. The study involved 35 second and third-grade students and their parents who volunteered to participate. The parental volunteers were randomly assigned to either the control group (children attending the workshops without a parent) or the treatment group (children attending the workshops with a parent). The study was conducted in the Fall of 1995 over a four-week period. The Analysis of Variance (ANOVA) and Kruskal-Wallis tests were used to determine the effects of the workshops on children's science achievement and science curiosity, as well as on parents' involvement with their child's education. The study revealed that there was no significant statistical difference at the.05 level between the treatment/control groups in children's science achievement or science curiosity, or in parent's involvement with their children's education. However, the study did focus parental attention on effective education and points the way to more extensive research in this critical learning area. This dual study, that is, the effects of teaching basic technology to young students with the support of their parents, reflects the focus of the Salve Regina University Ph.D. program in which technology is examined in its effects on humans. In essence, this program investigates what it means to be human in an age of advanced technology.
Proceedings of the Third Infrared Detector Technology Workshop
NASA Technical Reports Server (NTRS)
Mccreight, Craig R. (Compiler)
1989-01-01
This volume consists of 37 papers which summarize results presented at the Third Infrared Detector Technology Workshop, held February 7-9, 1989, at Ames Research Center. The workshop focused on infrared (IR) detector, detector array, and cryogenic electronic technologies relevant to low-background space astronomy. Papers on discrete IR detectors, cryogenic readouts, extrinsic and intrinsic IR arrays, and recent results from ground-based observations with integrated arrays were given. Recent developments in the second-generation Hubble Space Telescope (HST) infrared spectrometer and in detectors and arrays for the European Space Agency's Infrared Space Observatory (ISO) are also included, as are status reports on the Space Infrared Telescope Facility (SIRTF) and the Stratospheric Observatory for Infrared Astronomy (SOFIA) projects.
A NASA Spaceliner 100 Propulsion Oriented Technology Assessment
NASA Technical Reports Server (NTRS)
Dankhoff, W.; Dayton, K.; Levack, D.; Odom, P.; Rhodes, R.; Robinson, J.
2000-01-01
In response to a NASA request, the National Space Propulsion Synergy Team (SPST) team agreed to provide technical and programmatic support to NASA in formulating a Spaceliner 100 Technology Program. The SPST offered a broad cross-section of expertise and experience. Its membership consists of senior level, volunteer representatives from across government, industry, and academia. The purpose of this paper is to provide a summary of the SPST support of SL100, which culminated in a propulsion technologies assessment and prioritization workshop conducted at MSFC. The results of this workshop and the follow-up analysis are part of this report. Also included, is a review of some "lessons learned" that were solicited from the workshop participants.
Electronics reliability and measurement technology
NASA Technical Reports Server (NTRS)
Heyman, Joseph S. (Editor)
1987-01-01
A summary is presented of the Electronics Reliability and Measurement Technology Workshop. The meeting examined the U.S. electronics industry with particular focus on reliability and state-of-the-art technology. A general consensus of the approximately 75 attendees was that "the U.S. electronics industries are facing a crisis that may threaten their existence". The workshop had specific objectives to discuss mechanisms to improve areas such as reliability, yield, and performance while reducing failure rates, delivery times, and cost. The findings of the workshop addressed various aspects of the industry from wafers to parts to assemblies. Key problem areas that were singled out for attention are identified, and action items necessary to accomplish their resolution are recommended.
DOE planning workshop advanced biomedical technology initiative
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1994-06-01
The Department of Energy has mad major contributions in the biomedical sciences with programs in medical applications and instrumentation development, molecular biology, human genome, and computational sciences. In an effort to help determine DOE`s role in applying these capabilities to the nation`s health care needs, a planning workshop was held on January 11--12, 1994. The workshop was co-sponsored by the Department`s Office of Energy Research and Defense Programs organizations. Participants represented industry, medical research institutions, national laboratories, and several government agencies. They attempted to define the needs of the health care industry. identify DOE laboratory capabilities that address these needs,more » and determine how DOE, in cooperation with other team members, could begin an initiative with the goals of reducing health care costs while improving the quality of health care delivery through the proper application of technology and computational systems. This document is a report of that workshop. Seven major technology development thrust areas were considered. Each involves development of various aspects of imaging, optical, sensor and data processing and storage technologies. The thrust areas as prioritized for DOE are: (1) Minimally Invasive Procedures; (2) Technologies for Individual Self Care; (3) Outcomes Research; (4) Telemedicine; (5) Decision Support Systems; (6) Assistive Technology; (7) Prevention and Education.« less
Lucas, Rochelle Irene; Promentilla, Michael Angelo; Ubando, Aristotle; Tan, Raymond Girard; Aviso, Kathleen; Yu, Krista Danielle
2017-08-01
The emergence of information and communication technology (ICT) has created opportunities for enhancing the learning process at different educational levels. However, its potential benefits can only be fully realized if teachers are properly trained to utilize such tools. The rapid evolution of ICT also necessitates rigorous assessment of training programs by participants. Thus, this study proposes an evaluation framework based on the Analytic Hierarchy Process (AHP) to systematically evaluate such workshops designed for teachers. The evaluation model is decomposed hierarchically into four main criteria namely: (1) workshop design, (2) quality of content of the workshop, (3) quality of delivery of the content of the workshop, and the (4) relevance of the workshop. These criteria are further disaggregated into 24 sub-indicators to measure the effectiveness of the workshop as perceived by the participants based on their own expectations. This framework is applied to a case study of ICT workshops done in the Philippines. In this case, relevance of the workshop is found to be the most important main criterion identified by the participants, particularly on the new ICT knowledge that promotes teachers' professional growth and development. The workshop evaluation index (WEI) is also proposed as a metric to support decision-making by providing a mechanism for benchmarking performance, tracking improvement over time, and developing strategies for the design and improvement of training programs or workshops on ICT for teachers. Copyright © 2017 Elsevier Ltd. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jordan, G.
1995-10-30
The objective of the workshop was to promote discussions between experts and research managers on developing approaches for assessing the impact of DOE`s basic energy research upon the energy mission, applied research, technology transfer, the economy, and society. The purpose of this impact assessment is to demonstrate results and improve ER research programs in this era when basic research is expected to meet changing national economic and social goals. The questions addressed were: (1) By what criteria and metrics does Energy Research measure performance and evaluate its impact on the DOE mission and society while maintaining an environment that fostersmore » basic research? (2) What combination of evaluation methods best applies to assessing the performance and impact of OBES basic research? The focus will be upon the following methods: Case studies, User surveys, Citation analysis, TRACES approach, Return on DOE investment (ROI)/Econometrics, and Expert panels. (3) What combination of methods and specific rules of thumb can be applied to capture impacts along the spectrum from basic research to products and societal impacts?« less
Adult Literacy & Technology National Conference (Pittsburgh, Pennsylvania, July 27-31, 1988).
ERIC Educational Resources Information Center
Pennsylvania State Univ., University Park. Inst. for the Study of Adult Literacy.
This document provides advance information on the symposia, workshops, and presentations of a conference the purpose of which was to teach about new techniques and methodologies for applying technology as a solution to adult illiteracy. Brief summaries are provided of the content of the symposia, workshops, and presentations. Representative topics…
The 1979 Goddard Space Flight Center Battery Workshop
NASA Technical Reports Server (NTRS)
Halpert, G. (Editor)
1980-01-01
Papers discussing the latest results of testing, analysis, and development of the sealed nickel cadmium cell system are presented. Metal hydrogen and lithium cell technology and applications are also discussed. The purpose of the workshop was to share flight and test experience, stimulate discussion on problem areas, and to review the latest technology improvements.
First Montreal Workshop on Videotex Technology. Document de travail #112.
ERIC Educational Resources Information Center
Ball, A.; And Others
This report presents eight papers prepared for a workshop held in June 1980, which was planned to exchange ideas and experiences about, and arrive at a better understanding of, the technological issues that have an impact on videotex systems and their use. Papers emphasize alternative architectures for present and future videotex systems; database…
Developing a Technology Workshop Series for Your Faculty and Staff.
ERIC Educational Resources Information Center
Zeitz, Leigh E.
1995-01-01
Based on a needs assessment questionnaire, 13 technology workshops were designed for school personnel. Topics included an introduction; troubleshooting; e-mail and the Internet; ERIC and CD-ROM databases; Microsoft Works; desktop publishing; presentation software; resources on CD-ROM; the X-Press news service; and interactive laser video discs. A…
ERIC Educational Resources Information Center
Tharp, D. Scott
2017-01-01
Online learning, defined as the use of Web-based technology to facilitate some or all learning experiences, continues to interest many universities. While technology shapes the landscape of higher education, questions remain regarding the ability and appropriateness of online learning spaces for social justice education (Dominique, 2016). This…
Photovoltaic Module Reliability Workshop 2012: February 28 - March 1, 2012
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kurtz, S.
2013-11-01
NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.
2nd international workshop on graphene and C3N4-based photocatalysts
NASA Astrophysics Data System (ADS)
Yu, Jiaguo; Jaroniec, Mietek
2018-02-01
Since 2009 graphene and C3N4-based photocatalysts have attracted a lot of attention in scientific and engineering communities because of their applications in photocatalysis. Graphene and C3N4-based photocatalysis was the main theme of the 2nd International Workshop on Graphene and C3N4-based Photocatalysts (IWGCP2) held at the Wuhan University of Technology, Wuhan, China on March 24-27, 2017. The IWGCP2 workshop was jointly organized by Wuhan University of Technology, Jianghan University, Changsha University and Kent State University, and was supported by the National Natural Science Foundation of China (NSFC), Wuhan University of Technology, Jianghan University, Changsha University, Beijing Perfectlight, ThermoFisher, LumaSense Technologies, Anhui Kemi, Zhenjiang Silver Jewelry, Instytut Fotonowy (Poland) and others. More than 240 colleagues from four continents (Asia, America, Australia and Europe) participated in this workshop, and presented 6 plenary lectures, 12 keynote lectures, 14 invited lectures, 5 oral lectures and 113 posters. A tradition of this meeting is the poster competition, which resulted in selecting 10 best posters.
Quantum Testbeds Stakeholder Workshop (QTSW) Report meeting purpose and agenda.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hebner, Gregory A.
Quantum computing (QC) is a promising early-stage technology with the potential to provide scientific computing capabilities far beyond what is possible with even an Exascale computer in specific problems of relevance to the Office of Science. These include (but are not limited to) materials modeling, molecular dynamics, and quantum chromodynamics. However, commercial QC systems are not yet available and the technical maturity of current QC hardware, software, algorithms, and systems integration is woefully incomplete. Thus, there is a significant opportunity for DOE to define the technology building blocks, and solve the system integration issues to enable a revolutionary tool. Oncemore » realized, QC will have world changing impact on economic competitiveness, the scientific enterprise, and citizen well-being. Prior to this workshop, DOE / Office of Advanced Scientific Computing Research (ASCR) hosted a workshop in 2015 to explore QC scientific applications. The goal of that workshop was to assess the viability of QC technologies to meet the computational requirements in support of DOE’s science and energy mission and to identify the potential impact of these technologies.« less
O'Brien, Travis J; LeLacheur, Susan; Ward, Caitlin; Lee, Norman H; Callier, Shawneequa; Harralson, Arthur F
2016-03-01
We assessed the impact of personal CYP2D6 testing on physician assistant student competency in, and attitudes toward, pharmacogenetics (PGx). Buccal samples were genotyped for CYP2D6 polymorphisms. Results were discussed during a 3-h PGx workshop. PGx knowledge was assessed by pre- and post-tests. Focus groups assessed the impact of the workshop on attitudes toward the clinical utility of PGx. Both student knowledge of PGx, and its perceived clinical utility, increased immediately following the workshop. However, exposure to PGx on clinical rotations following the workshop seemed to influence student attitudes toward PGx utility. Personal CYP2D6 testing improves both knowledge and comfort with PGx. Continued exposure to PGx concepts is important for transfer of learning.
The 1993 NASA Aerospace Battery Workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brewer, J.C.
1994-02-01
This document contains the proceedings of the 26th annual NASA Aerospace Battery Workshop, hosted by the Marshall Space Flight Center on 16-18 Nov. 1993. The workshop was attended by scientists and engineers from various agencies of the U.S. Government, aerospace contractors, and battery manufacturers, as well as international participation in like kind from a number of countries around the world. The subjects covered included nickel-cadmium, nickel-hydrogen, nickel-metal hydride, and lithium based technologies, as well as advanced technologies including various bipolar designs. Separate abstracts have been prepared for papers from this report.
Computational Intelligence and Its Impact on Future High-Performance Engineering Systems
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler)
1996-01-01
This document contains presentations from the joint UVA/NASA Workshop on Computational Intelligence held at the Virginia Consortium of Engineering and Science Universities, Hampton, Virginia, June 27-28, 1995. The presentations addressed activities in the areas of fuzzy logic, neural networks, and evolutionary computations. Workshop attendees represented NASA, the National Science Foundation, the Department of Energy, National Institute of Standards and Technology (NIST), the Jet Propulsion Laboratory, industry, and academia. The workshop objectives were to assess the state of technology in the Computational intelligence area and to provide guidelines for future research.
Government-Sponsored Programs on Structures Technology
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)
1997-01-01
This document contains the presentations from the joint UVA/AIAA workshops on Government-Sponsored Programs on Structures Technology, held on April 6, 1997 in Kissimmee, Florida and on September 4, 1997 in Hampton, Virginia. Workshop attendees were the Members and Friends of the AIAA Structures Technical Committee. The objectives of the workshops were to: (a) provide a forum for discussion of current government-sponsored programs in the structures area; (b) identify high-potential research areas for future aerospace systems; and (c) initiate suitable interaction mechanisms with the managers of structures programs.
The 1992 NASA Aerospace Battery Workshop
NASA Technical Reports Server (NTRS)
Brewer, Jeffrey C. (Compiler)
1993-01-01
This document contains the proceedings of the 23rd annual NASA Aerospace Battery Workshop, hosted by the Marshall Space Flight Center on November 15-19, 1992. The workshop was attended by scientists and engineers from various agencies of the U.S. Government, aerospace contractors, and battery manufacturers, as well as international participation in like kind from a number of countries around the world. The subjects covered included nickel-cadmium, nickel-hydrogen, nickel-metal hydride, and lithium based technologies, as well as advanced technologies including sodium-sulfur and various bipolar designs.
NASA Technical Reports Server (NTRS)
Ayon, Juan A.
1992-01-01
The Astrotech 21 Optical Systems Technology Workshop was held in Pasadena, California on March 6-8, 1991. The purpose of the workshop was to examine the state of Optical Systems Technology at the National Aeronautics Space Administration (NASA), and in industry and academia, in view of the potential Astrophysics mission set currently being considered for the late 1990's through the first quarter of the 21st century. The principal result of the workshop is this publication, which contains an assessment of the current state of the technology, and specific technology advances in six critical areas of optics, all necessary for the mission set. The workshop was divided into six panels, each of about a dozen experts in specific fields, representing NASA, industry, and academia. In addition, each panel contained expertise that spanned the spectrum from x-ray to submillimeter wavelengths. This executive summary contains the principal recommendations of each panel. The six technology panels and their chairs were: (1) Wavefront Sensing, Control, and Pointing, Thomas Pitts, Itek Optical Systems, A Division of Litton; (2) Fabrication, Roger Angel, Steward Observatory, University of Arizona; (3) Materials and Structures, Theodore Saito, Lawrence Livermore National Laboratory; (4) Optical Testing, James Wyant, WYKO Corporation; (5) Optical Systems Integrated Modeling, Robert R. Shannon, Optical Sciences Center, University of Arizona; and (6) Advanced Optical Instruments Technology, Michael Shao, Jet Propulsion Laboratory, California Institute of Technology. This Executive Summary contains the principal recommendations of each panel.
76 FR 62373 - Notice of Public Meeting-Cloud Computing Forum & Workshop IV
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-07
...--Cloud Computing Forum & Workshop IV AGENCY: National Institute of Standards and Technology (NIST), Commerce. ACTION: Notice. SUMMARY: NIST announces the Cloud Computing Forum & Workshop IV to be held on... to help develop open standards in interoperability, portability and security in cloud computing. This...
NASA Laser Light Scattering Advanced Technology Development Workshop, 1988
NASA Technical Reports Server (NTRS)
Meyer, William V. (Editor)
1989-01-01
The major objective of the workshop was to explore the capabilities of existing and prospective laser light scattering hardware and to assess user requirements and needs for a laser light scattering instrument in a reduced gravity environment. The workshop addressed experimental needs and stressed hardware development.
NASA Astrophysics Data System (ADS)
Stringer, L. C.; Fleskens, L.; Reed, M. S.; de Vente, J.; Zengin, M.
2014-11-01
Examples of sustainable land management (SLM) exist throughout the world. In many cases, SLM has largely evolved through local traditional practices and incremental experimentation rather than being adopted on the basis of scientific evidence. This means that SLM technologies are often only adopted across small areas. The DESIRE (DESertIfication mitigation and REmediation of degraded land) project combined local traditional knowledge on SLM with empirical evaluation of SLM technologies. The purpose of this was to evaluate and select options for dissemination in 16 sites across 12 countries. It involved (i) an initial workshop to evaluate stakeholder priorities (reported elsewhere), (ii) field trials/empirical modeling, and then, (iii) further stakeholder evaluation workshops. This paper focuses on workshops in which stakeholders evaluated the performance of SLM technologies based on the scientific monitoring and modeling results from 15 study sites. It analyses workshop outcomes to evaluate how scientific results affected stakeholders' perceptions of local SLM technologies. It also assessed the potential of this participatory approach in facilitating wider acceptance and implementation of SLM. In several sites, stakeholder preferences for SLM technologies changed as a consequence of empirical measurements and modeling assessments of each technology. Two workshop examples are presented in depth to: (a) explore the scientific results that triggered stakeholders to change their views; and (b) discuss stakeholders' suggestions on how the adoption of SLM technologies could be up-scaled. The overall multi-stakeholder participatory approach taken is then evaluated. It is concluded that to facilitate broad-scale adoption of SLM technologies, de-contextualized, scientific generalisations must be given local context; scientific findings must be viewed alongside traditional beliefs and both scrutinized with equal rigor; and the knowledge of all kinds of experts must be recognised and considered in decision-making about SLM, whether it has been formally codified or not. The approach presented in this paper provided this opportunity and received positive feedback from stakeholders.
The Intermediate Neutrino Program
DOE Office of Scientific and Technical Information (OSTI.GOV)
Adams, C.; Alonso, J. R.; Ankowski, A. M.
2017-04-03
The US neutrino community gathered at the Workshop on the Intermediate Neutrino Program (WINP) at Brookhaven National Laboratory February 4-6, 2015 to explore opportunities in neutrino physics over the next five to ten years. Scientists from particle, astroparticle and nuclear physics participated in the workshop. The workshop examined promising opportunities for neutrino physics in the intermediate term, including possible new small to mid-scale experiments, US contributions to large experiments, upgrades to existing experiments, R&D plans and theory. The workshop was organized into two sets of parallel working group sessions, divided by physics topics and technology. Physics working groups covered topicsmore » on Sterile Neutrinos, Neutrino Mixing, Neutrino Interactions, Neutrino Properties and Astrophysical Neutrinos. Technology sessions were organized into Theory, Short-Baseline Accelerator Neutrinos, Reactor Neutrinos, Detector R&D and Source, Cyclotron and Meson Decay at Rest sessions.This report summarizes discussion and conclusions from the workshop.« less
NASA-LaRc Flight-Critical Digital Systems Technology Workshop
NASA Technical Reports Server (NTRS)
Meissner, C. W., Jr. (Editor); Dunham, J. R. (Editor); Crim, G. (Editor)
1989-01-01
The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).
The 1995 NASA High-Speed Research Program Sonic Boom Workshop. Volume 1
NASA Technical Reports Server (NTRS)
Baize, Daniel G. (Editor)
1996-01-01
The High-Speed Research Program and NASA Langley Research Center sponsored the NASA High-Speed Research Program Sonic Boom Workshop on September 12-13, 1995. The workshop was designed to bring together NASAs scientists and engineers and their counterparts in industry, other Government agencies, and academia working together in the sonic boom element of NASAs High-Speed Research Program. Specific objectives of this workshop were to (1) report the progress and status of research in sonic boom propagation, acceptability, and design; (2) promote and disseminate this technology within the appropriate technical communities; (3) help promote synergy among the scientists working in the Program; and (4) identify technology pacing the development of viable reduced-boom High-Speed Civil Transport concepts. The Workshop included these sessions: Session 1 - Sonic Boom Propagation (Theoretical); Session 2 - Sonic Boom Propagation (Experimental); and Session 3 - Acceptability Studies - Human and Animal.
Real Time Conference 2014 Overview
NASA Astrophysics Data System (ADS)
Nomachi, Masaharu
2015-06-01
This article presents an overview of the 19th Real Time Conference held last May 26-30, 2014, at the Nara Prefectural New Public Hall, Nara, Japan, organized by the Research Center for Nuclear Physics of the Osaka University. The program included many invited talks and oral sessions offering an extensive overview on the following topics: real-time system architectures, intelligent signal processing, fast data transfer links and networks, trigger systems, data acquisition, processing-farms, control, monitoring and test systems, emerging real-time technologies, new standards, real-time safety and security, and some feedback on experiences. In parallel to the oral and poster presentations, industrial exhibits by companies, workshops and short courses also ran through the week.
An energy/emissions/economic analysis resource for north Moravia, upper Silesia, and Kisuca
DOE Office of Scientific and Technical Information (OSTI.GOV)
Walder, V.
1995-12-31
The United States Agency for International Development (USAID) is sponsoring the Technology Transfer Network (TTN) which is centered in Ostrava, Czech Republic. The primary objective of the TTN is to provide a resource for municipalities, industries, and companies interested in reducing air pollution, improving energy efficiency, and implementing projects in North Moravia, Upper Silesia, and Kisuca. The TTN is providing a communications network (newsletters, mailings, and other media), seminars, workshops, software, access to past and ongoing studies, and a database of U.S. vendors supporting the region. Seminars and major communication material of the TTN will be provided in Czech/Slovak, Polish,more » and English as appropriate.« less
Turbine Engine Hot Section Technology (HOST)
NASA Technical Reports Server (NTRS)
1983-01-01
A two-day workshop on the research and plans for turbine engine hot section durability problems was held on October 25 and 26, 1983, at the NASA Lewis Research Center. Presentations were made during six sessions, including structural analysis, fatigue and fracture, surface protective coatings, combustion, turbine heat transfer, and instrumentation, that dealt with the thermal and fluid environment around liners, blades, and vanes, and with material coatings, constitutive behavior, stress-strain response, and life prediction methods for the three components. The principal objective of each session was to disseminate the research results to date, along with future plans, in each of the six areas. Contract and government researchers presented results of their work.
NASA Technical Reports Server (NTRS)
Repucci, George
1996-01-01
This is the fourth report of a series of semi-annual reports that describe the technology areas being advanced under this contract and the progress achieved to date. The most significant technical event this period was the successful completion of the Lewis spacecraft in 2 years (contract award date was June 1994). In August of 1996 we held a program-wide Technology Workshop which covered all aspects of the Lewis payload. A copy of the Workshop proceedings is attached.
NASA Astrophysics Data System (ADS)
Rosenfeld, Anatoly B.; Zaider, Marco; Yamada, Josh; Zelefsky, Michael J.
2017-01-01
The biannual MMND (former MMD) - IPCT workshops was founded in collaboration between the Centre for Medical Radiation Physics, University of Wollongong and the Memorial Sloan Kettering Cancer Center (MSKCC) in 2001 and has become an important international multidisciplinary forum for the discussion of advanced quality assurance (QA) dosimetry technology for radiation therapy and space science, as well as advanced technologies for clinical cancer treatment.
International Workshop on Vibration Isolation Technology for Microgravity Science Applications
NASA Technical Reports Server (NTRS)
Lubomski, Joseph F. (Editor)
1992-01-01
The International Workshop on Vibration Isolation Technology for Microgravity Science Applications was held on April 23-25, 1991 at the Holiday Inn in Middleburg Heights, Ohio. The main objective of the conference was to explore vibration isolation requirements of space experiments and what level of vibration isolation could be provided both by present and planned systems on the Space Shuttle and Space Station Freedom and by state of the art vibration isolation technology.
Jennifer Forbey; Gail Patricelli; Donna Delparte; Alan Krakauer; Peter Olsoy; Marcella Fremgen; Jordan Nobler; Nancy Glenn; Lucas Spaete; Bryce Richardson; Lisa Shipley; Jessica Mitchell
2016-01-01
We held a workshop related to the use of emerging technology to understand the ecology of grouse on 03 September 2015 from 08:00 to 17:30 at the Reykjavik Family Park and Zoo, Reykjavik, Iceland as part of the 13th International Grouse Symposium. Our overall objective was to translate technological advances in remote sensing, rapid biochemical assays, and robotics to...
ERIC Educational Resources Information Center
Harlen, Wynne, Comp.
A conference on science and technology and future human needs was attended by over 300 science educators from 64 countries. Educators with particular interest in primary science and technology education extended their stay for an additional seminar. This report highlights the events of that seminar. Contents include: (1) recent and on-going work…
The Coordinating Research Council (CRC) conducted an Air Quality Research Needs Workshop on February 9-10, 2016 at the Georgia Institute of Technology, in Atlanta, GA. The workshop brought together researchers from academia, government, and industry to brainstorm and prioritize ...
75 FR 33659 - ITS Joint Program Office; IntelliDriveSM
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-14
... IntelliDrive\\SM\\ safety technical and policy research roadmaps. The workshop will be held on July 20-22... first day of the workshop will provide a detailed discussion of the technical research activities within... Workshop AGENCY: Research and Innovative Technology Administration, U.S. Department of Transportation...
Bibliography of NASA-related publications on wind turbine technology 1973-1995
NASA Technical Reports Server (NTRS)
Spera, David A.
1995-01-01
A major program of research and development projects on wind turbines for generating electricity was conducted at the NASA Lewis Research Center from 1973 to 1988. Most of these projects were sponsored by the U.S. Department of Energy (DOE), as a major element of its Federal Wind Energy Program. One other large-scale wind turbine project was sponsored by the Bureau of Reclamation of the Department of Interior (DOI). The peak years for wind energy work at Lewis were 1979-80, when almost 100 engineers, technicians, and administrative personnel were involved. From 1988 their conclusion in 1995, NASA wind energy activities have been directed toward the transfer of technology to commercial and academic organizations. Wind energy activities at NASA can be divided into two broad categories which are closely related and often overlapping: (1) Designing, building, and testing a series of 12 large-scale, experimental, horizontal-axis wind turbines (HAWT's); and (2) conducting supporting research and technology (SR&T) projects. The purpose of this bibliography is to assist those active in the field of wind energy in locating the technical information they need on wind power planning, wind loads, turbine design and analysis, fabrication and installation, laboratory and field testing, and operations and maintenance. This bibliography contains approximately 620 citations of publications by over 520 authors and co-authors. Sources are: (1) NASA reports authored by government grantee, and contractor personnel, (2) papers presented by attendees at NASA-sponsored workshops and conferences, (3) papers presented by NASA personnel at outside workshops and conferences, and (4) outside publications related to research performed at NASA/ DOE wind turbine sites.
Report on a NASA astrobiology institute-funded workshop without walls: stellar stoichiometry.
Desch, Steven J; Young, Patrick A; Anbar, Ariel D; Hinkel, Natalie; Pagano, Michael; Truitt, Amanda; Turnbull, Margaret
2014-04-01
We report on the NASA Astrobiology Institute-funded Workshop Without Walls entitled "Stellar Stoichiometry," hosted by the "Follow the Elements" team at Arizona State University in April 2013. We describe several innovative practices we adopted that made effective use of the Workshop Without Walls videoconferencing format, including use of information technologies, assignment of scientific tasks before the workshop, and placement of graduate students in positions of authority. A companion article will describe the scientific results arising from the workshop. Our intention here is to suggest best practices for future Workshops Without Walls.
Opportunities to integrate new approaches in genetic toxicology: an ILSI-HESI workshop report.
Zeiger, Errol; Gollapudi, Bhaskar; Aardema, Marilyn J; Auerbach, Scott; Boverhof, Darrell; Custer, Laura; Dedon, Peter; Honma, Masamitsu; Ishida, Seiichi; Kasinski, Andrea L; Kim, James H; Manjanatha, Mugimane G; Marlowe, Jennifer; Pfuhler, Stefan; Pogribny, Igor; Slikker, William; Stankowski, Leon F; Tanir, Jennifer Y; Tice, Raymond; van Benthem, Jan; White, Paul; Witt, Kristine L; Thybaud, Véronique
2015-04-01
Genetic toxicity tests currently used to identify and characterize potential human mutagens and carcinogens rely on measurements of primary DNA damage, gene mutation, and chromosome damage in vitro and in rodents. The International Life Sciences Institute Health and Environmental Sciences Institute (ILSI-HESI) Committee on the Relevance and Follow-up of Positive Results in In Vitro Genetic Toxicity Testing held an April 2012 Workshop in Washington, DC, to consider the impact of new understanding of biology and new technologies on the identification and characterization of genotoxic substances, and to identify new approaches to inform more accurate human risk assessment for genetic and carcinogenic effects. Workshop organizers and speakers were from industry, academe, and government. The Workshop focused on biological effects and technologies that would potentially yield the most useful information for evaluating human risk of genetic damage. Also addressed was the impact that improved understanding of biology and availability of new techniques might have on genetic toxicology practices. Workshop topics included (1) alternative experimental models to improve genetic toxicity testing, (2) Biomarkers of epigenetic changes and their applicability to genetic toxicology, and (3) new technologies and approaches. The ability of these new tests and technologies to be developed into tests to identify and characterize genotoxic agents; to serve as a bridge between in vitro and in vivo rodent, or preferably human, data; or to be used to provide dose response information for quantitative risk assessment was also addressed. A summary of the workshop and links to the scientific presentations are provided. © 2014 Wiley Periodicals, Inc.
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler)
2000-01-01
This document contains the proceedings of the Training Workshop on Nanobiotechnology held at NASA Langley Research Center, Hampton, Virginia, June 14-15, 2000. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technolog and NASA. Workshop attendees were from NASA, other government agencies, industry and universities. The objectives of the workshop were to give overviews of the diverse activities in nanobiotechnology and to identify their potential for future aerospace systems.
Proc. of the workshop on pushing the limits of RF superconductivity.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kim, K-J., Eyberger, C., editors
2005-04-13
For three days in late September last year, some sixty experts in RF superconductivity from around the world came together at Argonne to discuss how to push the limits of RF superconductivity for particle accelerators. It was an intense workshop with in-depth presentations and ample discussions. There was added excitement due to the fact that, a few days before the workshop, the International Technology Recommendation Panel had decided in favor of superconducting technology for the International Linear Collider (ILC), the next major high-energy physics accelerator project. Superconducting RF technology is also important for other large accelerator projects that are eithermore » imminent or under active discussion at this time, such as the Rare Isotope Accelerator (RIA) for nuclear physics, energy recovery linacs (ERLs), and x-ray free-electron lasers. For these accelerators, the capability in maximum accelerating gradient and/or the Q value is essential to limit the length and/or operating cost of the accelerators. The technological progress of superconducting accelerators during the past two decades has been truly remarkable, both in low-frequency structures for acceleration of protons and ions as well as in high-frequency structures for electrons. The requirements of future accelerators demand an even higher level of performance. The topics of this workshop are therefore highly relevant and timely. The presentations given at the workshop contained authoritative reviews of the current state of the art as well as some original materials that previously had not been widely circulated. We therefore felt strongly that these materials should be put together in the form of a workshop proceeding. The outcome is this report, which consists of two parts: first, a collection of the scholarly papers prepared by some of the participants and second, copies of the viewgraphs of all presentations. The presentation viewgraphs, in full color, are also available from the Workshop Presentations link on the workshop's web page at http://www.aps.anl.gov/conferences/RFSCLimits/. I would like to thank all of the participants for their lively contributions to the workshop and to these proceedings, and Helen Edwards and Hasan Padamsee for their help in developing the workshop program. I also thank Cathy Eyberger, Kelly Jaje, and Renee Lanham for working very hard to take care of the administrative details, in particular Cathy for editing this report.« less
Form and Governance: Considering the Drama as a "Technology of the Self"
ERIC Educational Resources Information Center
Cahill, Helen
2012-01-01
Foucault's "technologies of the self" provides a frame through which to review the way in which different drama conventions work to govern the knowledge of the self that can be represented through the drama. The "Learning Partnerships" workshops provide the field site for the study. These workshops position high school drama students as coaches…
Aeronautics Technology Possibilities for 2000: Report of a Workshop (January 1984).
ERIC Educational Resources Information Center
National Academy of Sciences - National Research Council, Washington, DC. Commission on Engineering and Technical Systems.
The National Research Council's Aeronautics and Space Engineering Board conducted a workshop in January 1984 to project what the state of knowledge of aeronautical technology could be in the year 2000 if necessary supporting resources were made available. Eight panels were organized to assess possibilities in the areas of: (1) aerodynamics; (2)…
The workshop on Technologies and Innovative Solutions for Harvesting and Nonpotable Use of Rain and Stormwater in Urban Settings was held on April 24–25, 2013, in Cincinnati, Ohio. The purpose of this workshop was to identify: (1) innovative strategies currently being employed fo...
Tinkering with Technology: A Library Workshop to Support 4-H Youth Development
ERIC Educational Resources Information Center
Hendrix, Beth; Williamson, Evan
2017-01-01
When University of Idaho (UI) Extension brought the Idaho 4-H Teen Conference to UI's main campus, the conference organizers collaborated with UI librarians to organize a workshop in the library's newly established makerspace, the Making, Innovating, and Learning Laboratory (MILL). In the MILL, the students used cutting-edge technology to foster…
Innovative Long Wavelength Infrared Detector Workshop Proceedings
NASA Technical Reports Server (NTRS)
Grunthaner, Frank J.
1990-01-01
The focus of the workshop was on innovative long wavelength (lambda less than 17 microns) infrared (LWIR) detectors with the potential of meeting future NASA and DoD long-duration space application needs. Requirements are for focal plane arrays which operate near 65K using active refrigeration with mission lifetimes of five to ten years. The workshop addressed innovative concepts, new material systems, novel device physics, and current progress in relation to benchmark technology. It also provided a forum for discussion of performance characterization, producibility, reliability, and fundamental limitations of device physics. It covered the status of the incumbent HgCdTe technology, which shows encouraging progress towards LWIR arrays, and provided a snapshot of research and development in several new contender technologies.
Surface Modeling, Grid Generation, and Related Issues in Computational Fluid Dynamic (CFD) Solutions
NASA Technical Reports Server (NTRS)
Choo, Yung K. (Compiler)
1995-01-01
The NASA Steering Committee for Surface Modeling and Grid Generation (SMAGG) sponsored a workshop on surface modeling, grid generation, and related issues in Computational Fluid Dynamics (CFD) solutions at Lewis Research Center, Cleveland, Ohio, May 9-11, 1995. The workshop provided a forum to identify industry needs, strengths, and weaknesses of the five grid technologies (patched structured, overset structured, Cartesian, unstructured, and hybrid), and to exchange thoughts about where each technology will be in 2 to 5 years. The workshop also provided opportunities for engineers and scientists to present new methods, approaches, and applications in SMAGG for CFD. This Conference Publication (CP) consists of papers on industry overview, NASA overview, five grid technologies, new methods/ approaches/applications, and software systems.
Training veterinarians and agricultural advisers on a novel tool for tail biting prevention.
Vom Brocke, A L; Madey, D P; Gauly, M; Schrader, L; Dippel, S
2015-01-01
Many health and welfare problems in modern livestock production are multifactorial problems which require innovative solutions, such as novel risk assessment and management tools. However, the best way to distribute such novel - and usually complex - tools to the key applicants still has to be discussed. This paper shares experiences from distributing a novel tail biting prevention tool ('SchwIP') to 115 farm advisers and 19 veterinarians in 23 one-day workshops. Participants gave written and oral feedback at the end of the workshops, which was later analysed together with the number of farms they had visited after the workshops. Workshop groups were categorised into groups showing (a) HIGH, (b) INTermediate or (c) LOW levels of antagonism against SchwIP or parts of it during workshop discussions. Group types did not significantly differ in their evaluation of knowledge transfer. However, HIGH group members evaluated the on-farm usability of the tool significantly lower in the workshop feedback and tended to visit fewer farms. As antagonistic discussion can influence workshop output, future workshop leaders should strive for basic communication training as well as some group leadership experience before setting up and leading workshops.
Space Station Workshop: Commercial Missions and User Requirements
NASA Technical Reports Server (NTRS)
1988-01-01
The topics of discussion addressed during a three day workshop on commercial application in space are presented. Approximately half of the program was directed towards an overview and orientation to the Space Station Project; the technical attributes of space; and present and future potential commercial opportunities. The remaining time was spent addressing technological issues presented by previously-formed industry working groups, who attempted to identify the technology needs, problems or issues faced and/or anticipated by the following industries: extraction (mining, agriculture, petroleum, fishing, etc.); fabrication (manufacturing, automotive, aircraft, chemical, pharmaceutical and electronics); and services (communications, transportation and retail robotics). After the industry groups presented their technology issues, the workshop divided into smaller discussion groups composed of: space experts from NASA; academia; industry experts in the appropriate disciplines; and other workshop participants. The needs identified by the industry working groups, space station technical requirements, proposed commercial ventures and other issues related to space commercialization were discussed. The material summarized and reported are the consensus from the discussion groups.
PREFACE: APCTP-ASEAN Workshop on Advanced Materials Science and Nanotechnology (AMSN08)
NASA Astrophysics Data System (ADS)
Van Hieu, Nguyen
2009-09-01
Dear friends To contribute to the enhancement of the international scientific cooperation of the ASEAN countries and in reply to the proposal of the Vietnam Academy of Science and Technology (VAST), the Asia-Pacific Center for Theoretical Physics (APCTP) and the Sub Committee on Materials Science and Technology (SCMST) of the ASEAN Committee of Science and Technology (ASEAN COST) agreed to organize this APCTP-ASEAN Workshop on Advanced Materials Science and Nanotechnology with the participation of the Ministry of Science and Technology of Vietnam, the Vietnam Academy of Science and Technology, Rencontres du Vietnam, the Vietnam Physical Society, the Vietnam National University in Ho Chi Minh City and the Vietnam National University in Hanoi. As well as the participants from 9 of the 10 ASEAN countries and many other countries/regions of APCTP (Australia, China, Chinese Taipei, Japan and Korea) we warmly welcome the guests from Europe, the United States, Canada and Israel. Without the financial support of the Asia-Pacific Center for Theoretical Physics APCTP, Abdus Salam International Center for Theoretical Physics ICTP, the Asian Office of Aerospace Research and Development AOARD, the US Office of Naval Research Global-Asia ONRG, the Ministry of Science and Technology of Vietnam MOST, the Vietnam Academy of Science and Technology VAST, the Vietnam National University in Ho Chi Minh City VNU HCMC and other Sponsors, we would have been unable to hold this Workshop. On behalf of the International and Local Organizing Committees I would like to express our deep gratitude to the Sponsors. We highly appreciate the support and advice of the members of the International Advisory Committee, the scientific contribution of the invited speakers and all participants. We acknowledge the warm reception of the Khanh Hoa province Administration and citizens, and the hard work of the VAST staff for the success of the Workshop. We cordially wish all participants lively scientific discussions and enjoyable meetings at the Workshop and a pleasant stay in beautiful Nha Trang. We do hope that all foreign participants will take away good impressions of Vietnamese hospitality. Nguyen Van Hieu VAST and APCTP Chairman of the Workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Becker, Kurt H.; McCurdy, C. William; Orlando, Thomas M.
2000-09-01
This report is based largely on presentations and discussions at two workshops and contributions from workshop participants. The workshop on Fundamental Challenges in Electron-Driven Chemistry was held in Berkeley, October 9-10, 1998, and addressed questions regarding theory, computation, and simulation. The workshop on Electron-Driven Processes: Scientific Challenges and Technological Opportunities was held at Stevens Institute of Technology, March 16-17, 2000, and focused largely on experiments. Electron-molecule and electron-atom collisions initiate and drive almost all the relevant chemical processes associated with radiation chemistry, environmental chemistry, stability of waste repositories, plasma-enhanced chemical vapor deposition, plasma processing of materials for microelectronic devices andmore » other applications, and novel light sources for research purposes (e.g. excimer lamps in the extreme ultraviolet) and in everyday lighting applications. The life sciences are a rapidly advancing field where the important role of electron-driven processes is only now beginning to be recognized. Many of the applications of electron-initiated chemical processes require results in the near term. A large-scale, multidisciplinary and collaborative effort should be mounted to solve these problems in a timely way so that their solution will have the needed impact on the urgent questions of understanding the physico-chemical processes initiated and driven by electron interactions.« less
Slomian, Justine; Emonts, Patrick; Vigneron, Lara; Acconcia, Alessandro; Reginster, Jean-Yves; Oumourgh, Mina; Bruyère, Olivier
2017-05-03
The postnatal period is associated with many new needs for mothers. The aim of this study was to find technological solutions that meet the needs of mothers during the year following childbirth. Two co-creation workshops were undertaken with parents and professionals. The aim of the first workshop was to create a list of all the criteria the proposed solution would have to address to meet the needs of mothers after childbirth. The aim of the second workshop was to create solutions in response to the criteria selected during the first workshop. Parents and health professionals want solutions that include empathy (ie, to help fight against the feelings of abnormality and loneliness), that help mothers in daily life, that are personalized and adapted to different situations, that are educational, and that assures some continuity in their contact with health professionals. In practice, we found that parents and professionals think the solution should be accessible to everyone and available at all times. To address these criteria, technology experts proposed different solutions, such as a forum dedicated to the postpartum period that is supervised by professionals, a centralized website, a system of videoconferencing, an online exchange group, a "gift voucher" system, a virtual reality app, or a companion robot. The human component seems to be very important during the postnatal period. Nevertheless, technology could be a great ally in helping mothers during the postpartum period. Technology can help reliably inform parents and may also give them the right tools to find supportive people. However, these technologies should be tested in clinical trials. ©Justine Slomian, Patrick Emonts, Lara Vigneron, Alessandro Acconcia, Jean-Yves Reginster, Mina Oumourgh, Olivier Bruyère. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 03.05.2017.
Emonts, Patrick; Vigneron, Lara; Acconcia, Alessandro; Reginster, Jean-Yves; Oumourgh, Mina; Bruyère, Olivier
2017-01-01
Background The postnatal period is associated with many new needs for mothers. Objective The aim of this study was to find technological solutions that meet the needs of mothers during the year following childbirth. Methods Two co-creation workshops were undertaken with parents and professionals. The aim of the first workshop was to create a list of all the criteria the proposed solution would have to address to meet the needs of mothers after childbirth. The aim of the second workshop was to create solutions in response to the criteria selected during the first workshop. Results Parents and health professionals want solutions that include empathy (ie, to help fight against the feelings of abnormality and loneliness), that help mothers in daily life, that are personalized and adapted to different situations, that are educational, and that assures some continuity in their contact with health professionals. In practice, we found that parents and professionals think the solution should be accessible to everyone and available at all times. To address these criteria, technology experts proposed different solutions, such as a forum dedicated to the postpartum period that is supervised by professionals, a centralized website, a system of videoconferencing, an online exchange group, a “gift voucher” system, a virtual reality app, or a companion robot. Conclusions The human component seems to be very important during the postnatal period. Nevertheless, technology could be a great ally in helping mothers during the postpartum period. Technology can help reliably inform parents and may also give them the right tools to find supportive people. However, these technologies should be tested in clinical trials. PMID:28468746
Solomon, Howard M; Makris, Susan L; Alsaid, Hasan; Bermudez, Oscar; Beyer, Bruce K; Chen, Antong; Chen, Connie L; Chen, Zhou; Chmielewski, Gary; DeLise, Anthony M; de Schaepdrijver, Luc; Dogdas, Belma; French, Julian; Harrouk, Wafa; Helfgott, Jonathan; Henkelman, R Mark; Hesterman, Jacob; Hew, Kok-Wah; Hoberman, Alan; Lo, Cecilia W; McDougal, Andrew; Minck, Daniel R; Scott, Lelia; Stewart, Jane; Sutherland, Vicki; Tatiparthi, Arun K; Winkelmann, Christopher T; Wise, L David; Wood, Sandra L; Ying, Xiaoyou
2016-06-01
During the past two decades the use and refinements of imaging modalities have markedly increased making it possible to image embryos and fetuses used in pivotal nonclinical studies submitted to regulatory agencies. Implementing these technologies into the Good Laboratory Practice environment requires rigorous testing, validation, and documentation to ensure the reproducibility of data. A workshop on current practices and regulatory requirements was held with the goal of defining minimal criteria for the proper implementation of these technologies and subsequent submission to regulatory agencies. Micro-computed tomography (micro-CT) is especially well suited for high-throughput evaluations, and is gaining popularity to evaluate fetal skeletons to assess the potential developmental toxicity of test agents. This workshop was convened to help scientists in the developmental toxicology field understand and apply micro-CT technology to nonclinical toxicology studies and facilitate the regulatory acceptance of imaging data. Presentations and workshop discussions covered: (1) principles of micro-CT fetal imaging; (2) concordance of findings with conventional skeletal evaluations; and (3) regulatory requirements for validating the system. Establishing these requirements for micro-CT examination can provide a path forward for laboratories considering implementing this technology and provide regulatory agencies with a basis to consider the acceptability of data generated via this technology. Published by Elsevier Inc.
Computational Modeling of Tires
NASA Technical Reports Server (NTRS)
Noor, Ahmed K. (Compiler); Tanner, John A. (Compiler)
1995-01-01
This document contains presentations and discussions from the joint UVA/NASA Workshop on Computational Modeling of Tires. The workshop attendees represented NASA, the Army and Air force, tire companies, commercial software developers, and academia. The workshop objectives were to assess the state of technology in the computational modeling of tires and to provide guidelines for future research.
ERIC Educational Resources Information Center
Wood, Eileen; Willoughby, Teena; Specht, Jacqueline; Stern-Cavalcante, Wilma; Child, Carol
2002-01-01
Early childhood educators were assigned to one of three instructional conditions to assess the impact of computer workshops on their level of computer anxiety, knowledge, and comfort with technology. Overall, workshops provided gains that could translate into more effective and efficient computer use in the classroom. (Author)
77 FR 23224 - Request for Technical Input-Standards in Trade Workshops
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-18
... Institute of Standards and Technology (NIST) invites all interested parties, including U.S.-based... the current National Export Strategy. NIST will offer a limited number of workshops each year. Most workshops will be scheduled for a 3 to 5 day period at NIST in Gaithersburg, Maryland. NIST will evaluate...
NASA Technical Reports Server (NTRS)
Weisbin, C. R. (Editor)
2004-01-01
A workshop entitled, "Outstanding Research Issues in Systematic Technology Prioritization for New Space Missions," was convened on April 21-22, 2004 in San Diego, California to review the status of methods for objective resource allocation, to discuss the research barriers remaining, and to formulate recommendations for future development and application. The workshop explored the state-of-the-art in decision analysis in the context of being able to objectively allocate constrained technical resources to enable future space missions and optimize science return. This article summarizes the highlights of the meeting results.
Proceedings of the Air Transportation Management Workshop
NASA Technical Reports Server (NTRS)
Tobias, Leonard (Editor); Tashker, Michael G. (Editor); Boyle, Angela M. (Editor)
1995-01-01
The Air Transportation Management (ATM) Workshop was held 31 Jan. - 1 Feb. 1995 at NASA Ames Research Center. The purpose of the workshop was to develop an initial understanding of user concerns and requirements for future ATM capabilities and to initiate discussions of alternative means and technologies for achieving more effective ATM capabilities. The topics for the sessions were as follows: viewpoints of future ATM capabilities, user requirements, lessons learned, and technologies for ATM. In addition, two panel sessions discussed priorities for ATM, and potential contributions of NASA to ATM. The proceedings contain transcriptions of all sessions.
Mars Atmospheric Chemistry and Astrobiology Workshop Summary
NASA Astrophysics Data System (ADS)
Allen, M.; Wennberg, P.
2002-09-01
The Mars Atmospheric Chemistry and Astrobiology (MACA) Workshop was held on the California Institute of Technology campus December 17-18, 2001. The prime objective of the workshop was to consider whether extant life beneath the surface, if it exists, would be in contact with the atmosphere and introduce a detectable signature in the atmosphere. To answer this question, the workshop also explored how well we understood the abiotic chemistry of the current atmosphere and other drivers of atmospheric composition (volcanoes, surface-atmosphere interactions, escape). The conclusions from this workshop will be presented.
Microgravity Combustion Diagnostics Workshop
NASA Technical Reports Server (NTRS)
Santoro, Gilbert J. (Editor); Greenberg, Paul S. (Editor); Piltch, Nancy D. (Editor)
1988-01-01
Through the Microgravity Science and Applications Division (MSAD) of the Office of Space Science and Applications (OSSA) at NASA Headquarters, a program entitled, Advanced Technology Development (ATD) was promulgated with the objective of providing advanced technologies that will enable the development of future microgravity science and applications experimental flight hardware. Among the ATD projects one, Microgravity Combustion Diagnostics (MCD), has the objective of developing advanced diagnostic techniques and technologies to provide nonperturbing measurements of combustion characteristics and parameters that will enhance the scientific integrity and quality of microgravity combustion experiments. As part of the approach to this project, a workshop was held on July 28 and 29, 1987, at the NASA Lewis Research Center. A small group of laser combustion diagnosticians met with a group of microgravity combustion experimenters to discuss the science requirements, the state-of-the-art of laser diagnostic technology, and plan the direction for near-, intermediate-, and long-term programs. This publication describes the proceedings of that workshop.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Pivovar, Bryan
2017-03-31
Final report from the H2@Scale Workshop held November 16-17, 2016, at the National Renewable Energy Laboratory in Golden, Colorado. The U.S. Department of Energy's National Renewable Energy Laboratory hosted a technology workshop to identify the current barriers and research needs of the H2@Scale concept. H2@Scale is a concept regarding the potential for wide-scale impact of hydrogen produced from diverse domestic resources to enhance U.S. energy security and enable growth of innovative technologies and domestic industries. Feedback received from a diverse set of stakeholders at the workshop will guide the development of an H2@Scale roadmap for research, development, and early stagemore » demonstration activities that can enable hydrogen as an energy carrier at a national scale.« less
NASA Lewis Research Center Workshop on Forced Response in Turbomachinery
NASA Technical Reports Server (NTRS)
Stefko, George L. (Compiler); Murthy, Durbha V. (Compiler); Morel, Michael (Compiler); Hoyniak, Dan (Compiler); Gauntner, Jim W. (Compiler)
1994-01-01
A summary of the NASA Lewis Research Center (LeRC) Workshop on Forced Response in Turbomachinery in August, 1993 is presented. It was sponsored by the following NASA organizations: Structures, Space Propulsion Technology, and Propulsion Systems Divisions of NASA LeRC and the Aeronautics and Advanced Concepts & Technology Offices of NASA Headquarters. In addition, the workshop was held in conjunction with the GUIde (Government/Industry/Universities) Consortium on Forced Response. The workshop was specifically designed to receive suggestions and comments from industry on current research at NASA LeRC in the area of forced vibratory response of turbomachinery blades which includes both computational and experimental approaches. There were eight presentations and a code demonstration. Major areas of research included aeroelastic response, steady and unsteady fluid dynamics, mistuning, and corresponding experimental work.
ERIC Educational Resources Information Center
Watson, David G.
This document presents guidelines on the organization of short courses and workshops on the dissemination of data in science and technology. Such courses can be either of a "stand-alone" nature or they can constitute scientific data components of more general courses in information science. These courses are intended for documentalists,…
Proceedings of the Second Infrared Detector Technology Workshop
NASA Technical Reports Server (NTRS)
Mccreight, C. R. (Compiler)
1986-01-01
The workshop focused on infrared detector, detector array, and cryogenic electronic technologies relevant to low-background space astronomy. Papers are organized into the following categories: discrete infrared detectors and readout electronics; advanced bolometers; intrinsic integrated infrared arrays; and extrinsic integrated infrared arrays. Status reports on the Space Infrared Telescope Facility (SIRTF) and Infrared Space Observatory (ISO) programs are also included.
Adult Literacy and Technology. Report of a Workshop (October 1-2, 1984). Technical Report No. 351.
ERIC Educational Resources Information Center
Nickerson, Raymond S.
The problems and extent of adult illiteracy are presented in this workshop report, which explores how computer and communication technology might be applied in adult literacy education. The introduction provides statistics and a discussion of past and current attempts to teach illiterate adults. The major portion of the report focuses on what…
NASA Technical Reports Server (NTRS)
Gardner, James E. (Compiler); Jacobs, James A. (Compiler)
1990-01-01
Presented here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 88, held May 10 to 12, 1988 at the National Institute of Standards and Technology (NIST), Gaithersberg, Maryland. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.
ERIC Educational Resources Information Center
1977
The second of eight delegate workbooks prepared for the May, 1977 White House Conference on Handicapped Individuals contains ballots for the workshop on health concerns related to treatment, research and technology. The ballots are intended to enable delegates to assign priorities to various issues and proposals in a way that reflects conclusions…
ERIC Educational Resources Information Center
Heath, Simon, Ed.
This program for the 1994 Association for Learning Technology Conference provides a conference schedule and summarizes the presentations of the discussion workshops, hands-on workshops, live demonstrations, and poster sessions. Abstracts of the following papers presented at the conference are included: "The Conceptualisation Cycle" (J.…
NASA Astrophysics Data System (ADS)
2014-11-01
The Special issue presents the papers for the INERA Workshop entitled "Transition Metal Oxides as Functional Layers in Smart windows and Water Splitting Devices", which was held in Varna, St. Konstantin and Elena, Bulgaria, from the 4th-6th September 2014. The Workshop is organized within the context of the INERA "Research and Innovation Capacity Strengthening of ISSP-BAS in Multifunctional Nanostructures", FP7 Project REGPOT 316309 program, European project of the Institute of Solid State Physics at the Bulgarian Academy of Sciences. There were 42 participants at the workshop, 16 from Sweden, Germany, Romania and Hungary, 11 invited lecturers, and 28 young participants. There were researchers present from prestigious European laboratories which are leaders in the field of transition metal oxide thin film technologies. The event contributed to training young researchers in innovative thin film technologies, as well as thin films characterization techniques. The topics of the Workshop cover the field of technology and investigation of thin oxide films as functional layers in "Smart windows" and "Water splitting" devices. The topics are related to the application of novel technologies for the preparation of transition metal oxide films and the modification of chromogenic properties towards the improvement of electrochromic and termochromic device parameters for possible industrial deployment. The Workshop addressed the following topics: Metal oxide films-functional layers in energy efficient devices; Photocatalysts and chemical sensing; Novel thin film technologies and applications; Methods of thin films characterizations; From the 37 abstracts sent, 21 manuscripts were written and later refereed. We appreciate the comments from all the referees, and we are grateful for their valuable contributions. Guest Editors: Assoc. Prof. Dr.Tatyana Ivanova Prof. DSc Kostadinka Gesheva Prof. DSc Hassan Chamatti Assoc. Prof. Dr. Georgi Popkirov Workshop Organizing Committee Prof.DSc Kostadinka Gesheva, Central Laboratory of Solar Energy and New Energy Sources, Bulgarian Academy of Sciences (CL SENES-BAS) - Chairperson Assoc. Prof. Dr Anna Szekeres - Institute of Solid State Physics- BAS Assoc. Prof Dr. Tatyana Ivanova - CL SENES -BAS Assist. Prof. Radostina Kamburova - ISSP-BAS
Next-generation services for e-traceability to ionizing radiation national standards
NASA Astrophysics Data System (ADS)
Desrosiers, Marc F.; Klemick, Mark; Puhl, James M.; Uchida, David; Mallis, Steven
2004-09-01
An Internet-based system for fast, remote certification of high-dose radiation sources against the US national standard is being constructed at the National Institute of Standards and Technology (NIST). The new service will establish traceability (through transfer dosimetry) in real time at a lower cost by using automated routines and the Internet. A prototype of this service was successfully demonstrated in 2000 at the American Society for Testing and Materials (ASTM) Dosimetry Workshop in San Diego. Despite this impressive accomplishment, new developments demanded that several aspects of the service be modified. The new service has been completely redesigned to address these new demands and ensure greater accessibility. A description of the hardware and software configurations of this service as well as the communication and information management aspects will be presented. The Internet-based transfer certification program will provide industry with 24-h, 7-day-per-week, on-demand certifications, immediate turnaround times, and lower cost, ultimately improving the quality of the manufacturing process.
Sommerfeld, J; Oduola, A M J
2007-01-01
The African continent is disproportionately affected by infectious diseases. Malaria, HIV/AIDS, tuberculosis, and more "neglected" diseases including African trypanosomiasis, Buruli ulcer, leishmaniasis, onchocerciasis and trachoma continue to dramatically impact social and economic development on the continent. Health biotechnologies provide potential to develop effective strategies for the fight against the vicious circle of poverty and infections by helping in the development and improvement of novel affordable drugs, diagnostics and vaccines against these diseases. As the prospects of this emerging biotechnology research and deployment of its products become a reality in Africa, there is a need to consider the ethical, legal and social implications of both the scientific and technological advances and their use in the communities. The article provides a short overview of the potential values of biotechnology, issues involved in its transfer and presents the rationale, design and recommendations of the international workshop/symposium held in April 2005 at the International Institute for Tropical Agriculture (IITA) in Ibadan, Nigeria.
Electrical Actuation Technology Bridging
NASA Technical Reports Server (NTRS)
Hammond, Monica (Compiler); Sharkey, John (Compiler)
1993-01-01
This document contains the proceedings of the NASA Electrical Actuation Technology Bridging (ELA-TB) Workshop held in Huntsville, Alabama, September 29-October 1, 1992. The workshop was sponsored by the NASA Office of Space Systems Development and Marshall Space Flight Center (MSFC). The workshop addressed key technologies bridging the entire field of electrical actuation including systems methodology, control electronics, power source systems, reliability, maintainability, and vehicle health management with special emphasis on thrust vector control (TVC) applications on NASA launch vehicles. Speakers were drawn primarily from industry with participation from universities and government. In addition, prototype hardware demonstrations were held at the MSFC Propulsion Laboratory each afternoon. Splinter sessions held on the final day afforded the opportunity to discuss key issues and to provide overall recommendations. Presentations are included in this document.
Electrical Actuation Technology Bridging
NASA Astrophysics Data System (ADS)
Hammond, Monica; Sharkey, John
1993-05-01
This document contains the proceedings of the NASA Electrical Actuation Technology Bridging (ELA-TB) Workshop held in Huntsville, Alabama, September 29-October 1, 1992. The workshop was sponsored by the NASA Office of Space Systems Development and Marshall Space Flight Center (MSFC). The workshop addressed key technologies bridging the entire field of electrical actuation including systems methodology, control electronics, power source systems, reliability, maintainability, and vehicle health management with special emphasis on thrust vector control (TVC) applications on NASA launch vehicles. Speakers were drawn primarily from industry with participation from universities and government. In addition, prototype hardware demonstrations were held at the MSFC Propulsion Laboratory each afternoon. Splinter sessions held on the final day afforded the opportunity to discuss key issues and to provide overall recommendations. Presentations are included in this document.
Public key infrastructure for DOE security research
DOE Office of Scientific and Technical Information (OSTI.GOV)
Aiken, R.; Foster, I.; Johnston, W.E.
This document summarizes the Department of Energy`s Second Joint Energy Research/Defence Programs Security Research Workshop. The workshop, built on the results of the first Joint Workshop which reviewed security requirements represented in a range of mission-critical ER and DP applications, discussed commonalties and differences in ER/DP requirements and approaches, and identified an integrated common set of security research priorities. One significant conclusion of the first workshop was that progress in a broad spectrum of DOE-relevant security problems and applications could best be addressed through public-key cryptography based systems, and therefore depended upon the existence of a robust, broadly deployed public-keymore » infrastructure. Hence, public-key infrastructure ({open_quotes}PKI{close_quotes}) was adopted as a primary focus for the second workshop. The Second Joint Workshop covered a range of DOE security research and deployment efforts, as well as summaries of the state of the art in various areas relating to public-key technologies. Key findings were that a broad range of DOE applications can benefit from security architectures and technologies built on a robust, flexible, widely deployed public-key infrastructure; that there exists a collection of specific requirements for missing or undeveloped PKI functionality, together with a preliminary assessment of how these requirements can be met; that, while commercial developments can be expected to provide many relevant security technologies, there are important capabilities that commercial developments will not address, due to the unique scale, performance, diversity, distributed nature, and sensitivity of DOE applications; that DOE should encourage and support research activities intended to increase understanding of security technology requirements, and to develop critical components not forthcoming from other sources in a timely manner.« less
ERIC Educational Resources Information Center
California State Dept. of the Youth Authority, Sacramento.
This publication is the product of a two and one-half day workshop that was held to develop directions and strategies for meeting the future needs of California correctional education. The first part of the document contains the opening session address by California Assemblyman John Vasconcellos and two presentations--"The Doomed and the…
Workshop for transportation forecasters
DOT National Transportation Integrated Search
2009-01-01
On September 22-23, 2009, the U.S. Department of Transportation, Research and Innovative Technology Administration's - Bureau of Transportation Statistics is hosted an international workshop on transportation forecasting in Washington, D.C. Topics fo...
Battery energy-storage systems — an emerging market for lead/acid batteries
NASA Astrophysics Data System (ADS)
Cole, J. F.
Although the concept of using batteries for lead levelling and peak shaving has been known for decades, only recently have these systems become commercially viable. Changes in the structure of the electric power supply industry have required these companies to seek more cost-effective ways of meeting the needs of their customers. Through experience gained, primarily in the USA, batteries have been shown to provide multiple benefits to electric utilities. Also, lower maintenance batteries, more reliable electrical systems, and the availability of methods to predict costs and benefits have made battery energy-storage systems more attractive. Technology-transfer efforts in the USA have resulted in a willingness of electric utilities to install a number of these systems for a variety of tasks, including load levelling, peak shaving, frequency regulation and spinning reserve. Additional systems are being planned for several additional locations for similar applications, plus transmission and distribution deferral and enhanced power quality. In the absence of US champions such as the US Department of Energy and the Electric Power Research Institute, ILZRO is attempting to mount a technology-transfer programme to bring the benefits of battery energy-storage to European power suppliers. As a result of these efforts, a study group on battery energy-storage systems has been established with membership primarily in Germany and Austria. Also, a two-day workshop, prepared by the Electric Power Research Institute was held in Dublin. Participants included representatives of several European power suppliers. As a result, ESB National Grid of Ireland has embarked upon a detailed analysis of the costs and benefits of a battery energy-storage system in their network. Plans for the future include continuation of this technology-transfer effort, assistance in the Irish effort, and a possible approach to the European Commission for funding.
Workshop on the Suborbital Science Sounding Rocket Program, Volume 1
NASA Technical Reports Server (NTRS)
1991-01-01
The unique characteristics of the sounding rocket program is described, with its importance to space science stressed, especially in providing UARS correlative measurements. The program provided opportunities to do innovative scientific studies in regions not other wise accessible; it was a testbed for developing new technologies; and its key attributes were flexibility, reliability, and economy. The proceedings of the workshop are presented in viewgraph form, including the objectives of the workshop and the workshop agenda.
Workshops on photonics and optoinformatics for school students at ITMO University
NASA Astrophysics Data System (ADS)
Andreeva, Natalia; Ismagilov, Azat; Kuzmina, Tatiana; Kozlov, Sergei
2017-08-01
The program of workshops on photonics and optoinformatics was created at Department of Photonics and Optical Information Technologies in ITMO University by specialists in scientific and educational areas. These workshops are carried out for students of the best schools of Saint-Petersburg specialized in physics and mathematics, such as Gubernatorial Lyceum and Presidential Lyceum, and best schools of Russia. Every year about 500 of school students come to our workshops, including Annual summer educational practice.
The 1977 Goddard Space Flight Center Battery Workshop
NASA Technical Reports Server (NTRS)
1977-01-01
The papers presented were derived from transcripts taken at the Tenth Annual Battery Workshop held at the Goddard Space Flight Center, November 15-17, 1977. The Workshop was attended by manufacturers, users, and government representatives interested in the latest results of testing, analysis, and development of the sealed nickel cadmium cell system. The purpose of the Workshop was to share flight and test experience, stimulate discussion on problem areas, and to review the latest technology improvements.
Workshop on Atmospheric Transmission Modeling
1975-12-01
i I ,. PAPER, P-1152 WORKSHOP ON ATMOSPHERIC TRANSMISSION MODELING Conducted Rt IDA Arlington, Virginia " • 28 January 1975 Vincent J. Corcoran...34Program Chairman WORKSHOP PROCEEDINGS .- _ December 1975 ’Ii il INSTITUTE FOR DEFENSE ANALYSES S.... SCIENCE AND TECHNOLOGY DIVISION *N.• . .. IDA Log HO...Transmission, Modeling, Optical Propagation, Attenuation 0. AIIIIftACT~~II9C- O~* l@I ~..e ~I~tl j Ai ub --ýThis is a report on a workshop on atmospheric