Evaluating Teleworkers' Acceptance of Mobile Technology: A Study Based on the Utaut Model

ERIC Educational Resources Information Center

Mills, Jamia Sharie

2016-01-01

Mobile technology has provided flexible methods for employees to complete work-related tasks without being tied to an office. Research has predicted the level of training on mobile technology may impact a user's ability to complete work responsibilities accurately. This study intended to examine what behavior factors from the unified theory of…

Student Behavioural Intentions to Use Desktop Video Conferencing in a Distance Course: Integration of Autonomy to the UTAUT Model

ERIC Educational Resources Information Center

Lakhal, Sawsen; Khechine, Hager; Pascot, Daniel

2013-01-01

The aim of this study was to examine psychological factors which could influence acceptance and use of the desktop video conferencing technology by undergraduate business students. Based on the Unified Theory of Acceptance and Use of Technology, this study tested a theoretical model encompassing seven variables: behavioural intentions to use…

Implementation of utaut model to understand the use of virtual classroom principle in higher education

NASA Astrophysics Data System (ADS)

Aditya, B. R.; Permadi, A.

2018-03-01

This paper describes implementation of Unified Theory of Acceptance and User of Technology (UTAUT) model to assess the use of virtual classroom in support of teaching and learning in higher education. The purpose of this research is how virtual classroom that has fulfilled the basic principle can be accepted and used by students positively. This research methodology uses the quantitative and descriptive approach with a questionnaire as a tool for measuring the height of virtual classroom principle acception. This research uses a sample of 105 students in D3 Informatics Management at Telkom University. The result of this research is that the use of classroom virtual principle are positive and relevant to the students in higher education.

Factors Affecting Acceptance & Use of ReWIND: Validating the Extended Unified Theory of Acceptance and Use of Technology

ERIC Educational Resources Information Center

Nair, Pradeep Kumar; Ali, Faizan; Leong, Lim Chee

2015-01-01

Purpose: This study aims to explain the factors affecting students' acceptance and usage of a lecture capture system (LCS)--ReWIND--in a Malaysian university based on the extended unified theory of acceptance and use of technology (UTAUT2) model. Technological advances have become an important feature of universities' plans to improve the…

The Determinants of Student Effort at Learning ERP: A Cultural Perspective

ERIC Educational Resources Information Center

Alshare, Khaled A.; El-Masri, Mazen; Lane, Peggy L.

2015-01-01

This paper develops a research model based on the Unified Theory of Acceptance and Use of Technology model (UTAUT) and Hofstede's cultural dimensions to explore factors that influence student effort at learning Enterprise Resource Planning (ERP) systems. A Structural Equation Model (SEM) using LISREL was utilized to validate the proposed research…

Factors Affecting the Adoption of E-Learning Systems in Qatar and USA: Extending the Unified Theory of Acceptance and Use of Technology 2 (UTAUT2)

ERIC Educational Resources Information Center

El-Masri, Mazen; Tarhini, Ali

2017-01-01

This study examines the major factors that may hinder or enable the adoption of e-learning systems by university students in developing (Qatar) as well as developed (USA) countries. To this end, we used extended Unified Theory of Acceptance and Use of Technology 2 (UTAUT2) with Trust as an external variable. By means of an online survey, data were…

Model of Information and Communication Technology (ICT) Acceptance and Use for Teaching Staff in Sub-Saharan Africa Public Higher Education Institutions

ERIC Educational Resources Information Center

Ouedraogo, Boukary

2017-01-01

This article uses data survey on 82 teachers from the University of Ouagadougou and the model of unified theory of acceptance and use of technology (UTAUT) to assess the determinants of acceptance and educational use of ICT by teachers. The paper's outcomes show that the construct "performance expectancy" of ICT (expected utility and…

A Study of Personal Health Record User's Behavioral Model Based on the PMT and UTAUT Integrative Perspective.

PubMed

Hsieh, Hui-Lung; Kuo, Yu-Ming; Wang, Shiang-Ru; Chuang, Bi-Kun; Tsai, Chung-Hung

2016-12-23

The personal health record (PHR) is a system that enables borderless medical care services by combining technological innovation and human consideration. This study explored factors affecting the adoption of PHR from technical, medical, and social perspectives according to the Protection Motivation Theory (PMT) and Unified Theory of Acceptance and Use of Technology (UTAUT) model. A survey using a structured questionnaire was subsequently conducted, which produced the following results: (1) The PMT and UTAUT were effective at predicting PHR usage behaviors; (2) Perceived ease-of-use was the most decisive factor influencing the use of PHR, followed by self-efficacy and perceived usefulness; and (3) Behavioral intention for PHR was significantly and positively correlated with usage behavior. From the obtained results, this study recommends that health authorities and medical institutions promote self-efficacy in the use of PHR to improve the levels of behavioral intention and usage behavior among the people. Additionally, medical care institutions are recommended to promote health management and preventive healthcare concepts to help improve public acceptance of the PHR system as a means to self-manage their health. Finally, community centers, medical institutions, and health authorities are urged to work together to enhance public medical knowledge and pool resources for the PHR system, both of which are essential for improving the popularity of the PHR, public quality of life, and the effectiveness of health management.

Information Technology Security Professionals' Knowledge and Use Intention Based on UTAUT Model

ERIC Educational Resources Information Center

Kassa, Woldeloul

2016-01-01

Information technology (IT) security threats and vulnerabilities have become a major concern for organizations in the United States. However, there has been little research on assessing the effect of IT security professionals' knowledge on the use of IT security controls. This study examined the unified theory of acceptance and use of technology…

Exploring Factors Affecting Students' Continued Wiki Use for Individual and Collaborative Learning: An Extended UTAUT Perspective

ERIC Educational Resources Information Center

Yueh, Hsiu-Ping; Huang, Jo-Yi; Chang, Chueh

2015-01-01

The purpose of this study was to investigate what factors affect students' adaptation and continued use of a Wiki system for collaborative writing tasks through an extension of the Unified Theory of Acceptance and Use of Technology (UTAUT). This study was conducted in a general education course in a university in northern Taiwan. Data were…

A Study of Personal Health Record User’s Behavioral Model Based on the PMT and UTAUT Integrative Perspective

PubMed Central

Hsieh, Hui-Lung; Kuo, Yu-Ming; Wang, Shiang-Ru; Chuang, Bi-Kun; Tsai, Chung-Hung

2016-01-01

The personal health record (PHR) is a system that enables borderless medical care services by combining technological innovation and human consideration. This study explored factors affecting the adoption of PHR from technical, medical, and social perspectives according to the Protection Motivation Theory (PMT) and Unified Theory of Acceptance and Use of Technology (UTAUT) model. A survey using a structured questionnaire was subsequently conducted, which produced the following results: (1) The PMT and UTAUT were effective at predicting PHR usage behaviors; (2) Perceived ease-of-use was the most decisive factor influencing the use of PHR, followed by self-efficacy and perceived usefulness; and (3) Behavioral intention for PHR was significantly and positively correlated with usage behavior. From the obtained results, this study recommends that health authorities and medical institutions promote self-efficacy in the use of PHR to improve the levels of behavioral intention and usage behavior among the people. Additionally, medical care institutions are recommended to promote health management and preventive healthcare concepts to help improve public acceptance of the PHR system as a means to self-manage their health. Finally, community centers, medical institutions, and health authorities are urged to work together to enhance public medical knowledge and pool resources for the PHR system, both of which are essential for improving the popularity of the PHR, public quality of life, and the effectiveness of health management. PMID:28025557

Measuring Levels of End-Users' Acceptance and Use of Hybrid Library Services

ERIC Educational Resources Information Center

Tibenderana, Prisca; Ogao, Patrick; Ikoja-Odongo, J.; Wokadala, James

2010-01-01

This study concerns the adoption of Information Communication Technology (ICT) services in libraries. The study collected 445 usable data from university library end-users using a cross-sectional survey instrument. It develops, applies and tests a research model of acceptance and use of such services based on an existing UTAUT model by Venkatesh,…

Modified UTAUT2 Model for M-Learning among Students in India

ERIC Educational Resources Information Center

Bharati, V. Jayendra; Srikanth, R.

2018-01-01

Ubiquitous technologies have a great potential to enrich students' academic experience. Students are more interested in using interactive learning techniques apart from the traditional learning techniques. Several research studies for m-learning has been done in the USA, UK concentrating on students undergoing a graduation degree, especially…

Does Educational Level Matter in Adopting Online Education? A Malaysian Perspective

ERIC Educational Resources Information Center

Haghshenas, Hanif; Chatroudi, Ehsan Aminaei; Njeje, Fredy Anthony

2012-01-01

Having applied Unified Theory of Acceptance and Use of Technology (UTAUT) to predict intention and future usage behavior, the moderating effect of educational level was added to the model in moderating the relationship between variables. Also, despite past studies, Effort Expectancy had a higher beta than Performance Expectancy, while Social…

Predicting medical staff intention to use an online reporting system with modified unified theory of acceptance and use of technology.

PubMed

Chang, I-Chiu; Hsu, Hui-Mei

2012-01-01

Barriers to report incident events using an online information system (IS) may be different from those of a paper-based reporting system. The nationwide online Patient-Safety Reporting System (PSRS) contains a value judgment behind use of the system, similar to the Value of Perceived Consequence (VPC), which is seldom discussed in ISs applications of other disciplines. This study developed a more adequate research framework by integrating the VPC construct into the well-known Unified Theory of Acceptance and Use of Technology (UTAUT) model as a theoretical base to explore the predictors of medical staff's intention to use online PSRS. The results showed that management support was an important factor to influence medical staff's intention of using PSRS. The effects of factors such as performance expectancy, perceived positive, and perceived negative consequence on medical staff's intention of using PSRS were moderated by gender, age, experience, and occupation. The results proved that the modified UTAUT model is significant and useful in predicting medical staff's intention of using the nationwide online PSRS.

Understanding factors influencing the adoption of mHealth by the elderly: An extension of the UTAUT model.

PubMed

Hoque, Rakibul; Sorwar, Golam

2017-05-01

mHealth (mobile health) services are becoming an increasingly important form of information and communication technology (ICT) enabled delivery for healthcare, especially in low-resource environments such as developing countries like Bangladesh. Despite widespread adoption of mobile phones and the acknowledged potential of using them to improve healthcare services, the adoption and acceptance of this technology among the elderly is significantly low. However, little research has been done to draw any systematic study of the elderly's intention to adopt mHealth services. The aim of this study was to develop a theoretical model based on the Unified Theory of Acceptance and Use of Technology (UTAUT) and then empirically test it for determining the key factors influencing elderly users' intention to adopt and use the mHealth services. A face-to-face structured questionnaire survey method was used to collect data from nearly 300 participants of age 60 years and above from the capital city of Bangladesh. The data were analyzed using the Partial Least Squares (PLS) method, a statistical analysis technique based upon Structural Equation Modeling (SEM). The study determined that performance expectancy, effort expectancy, social influence, technology anxiety, and resistance to change (p<0.05) had a significant impact on the users' behavioral intention to adopt mHealth services. The study, however, revealed no significant relation between the facilitating condition and the users' behavioral intention to use the mHealth services (p>0.05). This study confirms the applicability of UTAUT model in the context of mHealth services among the elderly in developing countries like Bangladesh. It provides valuable information for mHealth service providers and policy makers in understanding the adoption challenges and the issues and also provides practical guidance for the successful implementation of mHealth services. Additionally the empirical findings identify implications related to the design and development of mHealth services that influence potential users. Furthermore, due to a generic approach, the findings of this study could be easily modified to assist other developing countries in the planning and up-take of mHealth services. Copyright © 2017 Elsevier B.V. All rights reserved.

Mobile augmented reality applications for heritage preservation in UNESCO world heritage sites through adopting the UTAUT model

NASA Astrophysics Data System (ADS)

Shang, Low Wei; Siang, Tan Gek; Zakaria, Mohd Hafiz bin; Emran, Muhammad Helmy

2017-04-01

Augmented reality (AR) technology has undergone enormous advancement and now AR applications can be seamlessly executed using modern-day smartphones. This study aims to develop a mobile AR application which consists of 3D AR models of historical monuments located within the UNESCO World Heritage Site in Melaka. The application allows tourists to obtain information of the monuments from the AR models, which provide an alternative way of visiting the actual monuments to prevent overcrowding effect and promote heritage preservation. Perceived Usefulness (PU), Perceived Ease of Use (PEU), Facilitating Conditions (FC), and Perceived Playfulness (PP) are proposed as the determinants of user's Behavioural Intention to Use (BI) the application. Using 50 tourists in Melaka as respondents, a pilot study has been conducted to determine user's acceptance of the AR mobile application based on the Unified Theory of Acceptance and Use of Technology (UTAUT). Cronbach's Alpha test validated the internal consistency of the measures. Multiple Linear Regression analysis suggested that the proposed determinants explained 51.2% in user's BI the application. PU was the strongest determinant followed by FC while PEU and PP were found to be insignificant.

Keep Using My Health Apps: Discover Users' Perception of Health and Fitness Apps with the UTAUT2 Model.

PubMed

Yuan, Shupei; Ma, Wenjuan; Kanthawala, Shaheen; Peng, Wei

2015-09-01

Health and fitness applications (apps) are one of the major app categories in the current mobile app market. Few studies have examined this area from the users' perspective. This study adopted the Extended Unified Theory of Acceptance and Use of Technology (UTAUT2) Model to examine the predictors of the users' intention to adopt health and fitness apps. A survey (n=317) was conducted with college-aged smartphone users at a Midwestern university in the United States. Performance expectancy, hedonic motivations, price value, and habit were significant predictors of users' intention of continued usage of health and fitness apps. However, effort expectancy, social influence, and facilitating conditions were not found to predict users' intention of continued usage of health and fitness apps. This study extends the UTATU2 Model to the mobile apps domain and provides health professions, app designers, and marketers with the insights of user experience in terms of continuously using health and fitness apps.

Factors Predicting Oncology Care Providers' Behavioral Intention to Adopt Clinical Decision Support Systems

ERIC Educational Resources Information Center

Wolfenden, Andrew

2012-01-01

The purpose of this quantitative correlation study was to examine the predictors of user behavioral intention on the decision of oncology care providers to adopt or reject the clinical decision support system. The Unified Theory of Acceptance and Use of Technology (UTAUT) formed the foundation of the research model and survey instrument. The…

iPad Acceptance by English Learners in Saudi Arabia

ERIC Educational Resources Information Center

Lawrence, Barry A. M.

2016-01-01

This study used the Unified Theory of Acceptance and Use of Technology (UTAUT; Venkatesh, Morris, Davis, & Davis, 2003) model to investigate factors predicting the acceptance of iPad tablets by learners of English as a foreign language (EFL) at a technical vocational college in Saudi Arabia. An online survey was conducted on 199 male learners,…

UTAUT Model for Blended Learning: The Role of Gender and Age in the Intention to Use Webinars

ERIC Educational Resources Information Center

Khechine, Hager; Lakhal, Sawsen; Pascot, Daniel; Bytha, Alphonse

2014-01-01

The purpose of the paper was to determine the factors that explain the acceptance of a webinar system (Elluminate) in a blended learning course by students. The effects of gender and age as moderating variables were also studied. Our hypotheses were based on the unified theory of acceptance and use of the technology model, which was proven to be…

Development of the UTAUT2 model to measure the acceptance of medical laboratory portals by patients in Shiraz.

PubMed

Ravangard, Ramin; Kazemi, Zhila; Abbasali, Somaye Zaker; Sharifian, Roxana; Monem, Hossein

2017-02-01

One of the main stages for achieving the success is acceptance of technology by its users. Hence, identifying the effective factors in successful acceptance of information technology is necessary and vital. One such factor is usability. This study aimed to investigate the software usability in the "Unified Theory of Acceptance and Use of Technology 2 (UTAUT2)" model in patients' use of medical diagnosis laboratories' electronic portals in 2015. This cross-sectional study was carried out on 170 patients in 2015. A 27-item questionnaire adopted from previous research and the Usability Evaluation questionnaire were used for data collection. Data were analyzed using Structural Equation Modeling (SEM), with Partial Least Squares approach by SPSS 20.0 and Smart-PLS V3.0. The results showed that the construct of intention to use had significant associations with price value (t-value=2.77), hedonic motivation (t-value=4.46), habit (t-value=1.99) and usability (t-value=5.2), as well as the construct of usage behavior with usability (t-value=3.45) and intention to use (t-value=2.03). Considering the results of this study, the following recommendations can be made in order for the higher use of portals by the patients: informing patients about the advantages of using these portals, designing portals in a simple and understandable form, increasing the portals' attractiveness, etc.

The Effect of the Attitude towards E-learning: The Employees' Intention to Use E-Learning in the Workplace

ERIC Educational Resources Information Center

Yoo, Sun Joo; Han, Seung-Hyun

2013-01-01

The purpose of this study is to examine employees' acceptance levels towards e-learning in the workplace. By using "The Unified Theory of Acceptance and Use of Technology" (UTAUT), our model captured the effect of factors influencing employees' intention to use e-learning in the workplace. Data was collected from 261 employees in a food…

Predicting Technology Use in Post-Secondary Teaching

ERIC Educational Resources Information Center

Williams, Jada Octavia

2015-01-01

This study examined the relationships between UTAUT [Unified Theory of Acceptance and Use of Technology] scores, academic discipline, institutional characteristics, and technology use in post-secondary teaching. (Abstract shortened by ProQuest.). [The dissertation citations contained here are published with the permission of ProQuest LLC. Further…

Development of the UTAUT2 model to measure the acceptance of medical laboratory portals by patients in Shiraz

PubMed Central

Ravangard, Ramin; Kazemi, Zhila; Abbasali, Somaye Zaker; Sharifian, Roxana; Monem, Hossein

2017-01-01

Introduction One of the main stages for achieving the success is acceptance of technology by its users. Hence, identifying the effective factors in successful acceptance of information technology is necessary and vital. One such factor is usability. This study aimed to investigate the software usability in the “Unified Theory of Acceptance and Use of Technology 2 (UTAUT2)” model in patients’ use of medical diagnosis laboratories’ electronic portals in 2015. Methods This cross-sectional study was carried out on 170 patients in 2015. A 27-item questionnaire adopted from previous research and the Usability Evaluation questionnaire were used for data collection. Data were analyzed using Structural Equation Modeling (SEM), with Partial Least Squares approach by SPSS 20.0 and Smart-PLS V3.0. Results The results showed that the construct of intention to use had significant associations with price value (t-value=2.77), hedonic motivation (t-value=4.46), habit (t-value=1.99) and usability (t-value=5.2), as well as the construct of usage behavior with usability (t-value=3.45) and intention to use (t-value=2.03). Conclusion Considering the results of this study, the following recommendations can be made in order for the higher use of portals by the patients: informing patients about the advantages of using these portals, designing portals in a simple and understandable form, increasing the portals’ attractiveness, etc. PMID:28465819

Acceptance of Technology and Its Impact on Teachers' Activities in Virtual Classroom: Integrating UTAUT and CoI into a Combined Model

ERIC Educational Resources Information Center

Radovan, Marko; Kristl, Nina

2017-01-01

This study examines the acceptance and use of learning management systems (LMS) among higher-education teachers and the relation between their use of such systems and their teaching approaches in the context of online learning, following the community of inquiry (CoI) framework. A total of 326 teachers at University of Ljubljana completed a…

What factors determine therapists' acceptance of new technologies for rehabilitation – a study using the Unified Theory of Acceptance and Use of Technology (UTAUT).

PubMed

Liu, Lili; Miguel Cruz, Antonio; Rios Rincon, Adriana; Buttar, Vickie; Ranson, Quentin; Goertzen, Darrell

2015-01-01

The aim of this study was to examine what factors affect the acceptance behavior and use of new technologies for rehabilitation by therapists at a large rehabilitation hospital in Canada. A self-administrated paper-based survey was created by adapting scales with high levels of internal consistency in prior research using the Unified Theory of Acceptance and Use of Technology (UTAUT). Items were scored on a 7-point Likert scale, ranging from "strongly disagree (1)" to "strongly agree (7)". The target population was all occupational therapists (OT) and physical therapists (PT) involved with the provision of therapeutic interventions at the hospital. Our research model was tested using partial least squares (PLS) technique. Performance expectancy was the strongest salient construct for behavioral intention to use new technologies in rehabilitation, whereas neither effort expectancy nor social influence were salient constructs for behavioral intention to use new technologies; (4) facilitating condition and behavioral intention to use new technologies were salient constructs for current use of new technologies in rehabilitation, with facilitating condition the strongest salient for current use of new technologies in rehabilitation. In a large rehabilitation hospital where use of new technologies in rehabilitation is not mandatory, performance expectancy, or how the technology can help in therapists' work, was the most important factor in determining therapists' acceptance and use of technologies. However, effort expectancy and social influence constructs were not important, i.e. therapists were not influenced by the degree of difficulty or social pressures to use technologies. Behavioral intention and facilitating condition, or institutional support, are related to current use of new technologies in rehabilitation.

Determinant Factors in Applying Picture Archiving and Communication Systems (PACS) in Healthcare.

PubMed

Abdekhoda, Mohammadhiwa; Salih, Kawa Mirza

2017-01-01

Meaningful use of picture archiving and communication systems (PACS) can change the workflow for accessing digital images, lead to faster turnaround time, reduce tests and examinations, and increase patient throughput. This study was carried out to identify determinant factors that affect the adoption of PACS by physicians. This was a cross-sectional study in which 190 physicians working in a teaching hospital affiliated with Tehran University of Medical Sciences were randomly selected. Physicians' perceptions concerning the adoption of PACS were assessed by the conceptual path model of the Unified Theory of Acceptance and Use of Technology (UTAUT). Collected data were analyzed with regression analysis. Structural equation modeling was applied to test the final model that was developed. The results show that the UTAUT model can explain about 61 percent of the variance on in the adoption of PACS ( R 2 = 0.61). The findings also showed that performance expectancy, effort expectancy, social influences, and behavior intention have a direct and significant effect on the adoption of PACS. However, facility condition showed to have no significant effect on physicians' behavior intentions. Implementation of new technology such as PACS in the healthcare sector is unavoidable. Our study clearly identified significant and nonsignificant factors that may affect the adoption of PACS. Also, this study acknowledged that physicians' perception is a key factor to manage the implementation of PACS optimally, and this fact should be considered by healthcare managers and policy makers.

Determinant Factors in Applying Picture Archiving and Communication Systems (PACS) in Healthcare

PubMed Central

Abdekhoda, Mohammadhiwa; Salih, Kawa Mirza

2017-01-01

Objectives Meaningful use of picture archiving and communication systems (PACS) can change the workflow for accessing digital images, lead to faster turnaround time, reduce tests and examinations, and increase patient throughput. This study was carried out to identify determinant factors that affect the adoption of PACS by physicians. Methods This was a cross-sectional study in which 190 physicians working in a teaching hospital affiliated with Tehran University of Medical Sciences were randomly selected. Physicians’ perceptions concerning the adoption of PACS were assessed by the conceptual path model of the Unified Theory of Acceptance and Use of Technology (UTAUT). Collected data were analyzed with regression analysis. Structural equation modeling was applied to test the final model that was developed. Results The results show that the UTAUT model can explain about 61 percent of the variance on in the adoption of PACS (R2 = 0.61). The findings also showed that performance expectancy, effort expectancy, social influences, and behavior intention have a direct and significant effect on the adoption of PACS. However, facility condition showed to have no significant effect on physicians’ behavior intentions. Conclusions Implementation of new technology such as PACS in the healthcare sector is unavoidable. Our study clearly identified significant and nonsignificant factors that may affect the adoption of PACS. Also, this study acknowledged that physicians’ perception is a key factor to manage the implementation of PACS optimally, and this fact should be considered by healthcare managers and policy makers. PMID:28855856

Factors influencing the adoption of E-learning in Tabriz University of Medical Sciences.

PubMed

Abdekhoda, Mohammadhiwa; Dehnad, Afsaneh; Ghazi Mirsaeed, Sayd Javad; Zarea Gavgani, Vahideh

2016-01-01

Background: Electronic Learning (E-learning), is the use of electronic technology in education via computer and the internet. Despite its slow adoption by faculty members, e-learning provides several benefits to individuals and organizations. This study was conducted to determine the factors influencing the adoption of e-learning by faculty members in Tabriz University of Medical Sciences. Methods: This was a cross- sectional study, in which a sample of 190 faculty members of Tabriz University of Medical Sciences was randomly selected, using stratified sampling. A Conceptual Path Model of Unified Theory of Acceptance and Use of Technology (UTAUT) was applied to assess the faculty members' attitude towards e-learning. The collected data were analyzed by SPSS16, using descriptive statistics and regression analysis. The model was tested by structural equation modeling (SEM) and was finally represented by Analysis of Moment Structures. Results: The results evidenced that UTAUT model explains about 56% of the variance for adoption of elearning. The findings also revealed that performance expectancy, effort expectancy, social influences and behavior indentation had direct and significant effects on faculty members' behavior towards the use of e-learning. However, facilitated condition had no significant effects on the use of e-learning. Conclusion: The authorized model provides considerable insight for perception and anticipation of faculty members' behaviors in adopting e-learning. The survey clearly identified significant and non-significant factors that may affect the adoption of e-learning. The results of this study could help the policy makers when successful adoption of e-learning is in their agenda.

Factors influencing the adoption of E-learning in Tabriz University of Medical Sciences

PubMed Central

Abdekhoda, Mohammadhiwa; Dehnad, Afsaneh; Ghazi Mirsaeed, Sayd Javad; Zarea Gavgani, Vahideh

2016-01-01

Background: Electronic Learning (E-learning), is the use of electronic technology in education via computer and the internet. Despite its slow adoption by faculty members, e-learning provides several benefits to individuals and organizations. This study was conducted to determine the factors influencing the adoption of e-learning by faculty members in Tabriz University of Medical Sciences. Methods: This was a cross- sectional study, in which a sample of 190 faculty members of Tabriz University of Medical Sciences was randomly selected, using stratified sampling. A Conceptual Path Model of Unified Theory of Acceptance and Use of Technology (UTAUT) was applied to assess the faculty members’ attitude towards e-learning. The collected data were analyzed by SPSS16, using descriptive statistics and regression analysis. The model was tested by structural equation modeling (SEM) and was finally represented by Analysis of Moment Structures. Results: The results evidenced that UTAUT model explains about 56% of the variance for adoption of elearning. The findings also revealed that performance expectancy, effort expectancy, social influences and behavior indentation had direct and significant effects on faculty members’ behavior towards the use of e-learning. However, facilitated condition had no significant effects on the use of e-learning. Conclusion: The authorized model provides considerable insight for perception and anticipation of faculty members’ behaviors in adopting e-learning. The survey clearly identified significant and non-significant factors that may affect the adoption of e-learning. The results of this study could help the policy makers when successful adoption of e-learning is in their agenda. PMID:28491832

Measurement Invariance of the UTAUT Constructs in the Caribbean

ERIC Educational Resources Information Center

Thomas, Troy D.; Singh, Lenandlar; Gaffar, Kemuel; Thakur, Dhanaraj; Jackman, Grace-Ann; Thomas, Michael; Gajraj, Roger; Allen, Claudine; Tooma, Keron

2014-01-01

This article employs confirmatory factor analysis to evaluate the factorial validity and the cross-national comparability of the UTAUT constructs with respect to mobile learning in higher education in four Caribbean countries. Except for the measurement of one factor, the UTAUT constructs exhibit adequate reliability and validity. Though full…

Social Media Adoption and Use among Information Technology Professionals and Implications for Leadership

ERIC Educational Resources Information Center

Lundahl Philpot, Eva

2013-01-01

This sequential, mixed methods research addressed emerging social media use practices among IT professionals and explored lived experiences of senior IT leaders relative to successful organizational social media adoption and use. The study was informed by structuration theory and elements from the universal technology adoption and use (UTAUT)…

Dynamic Analysis of UTAUT: The Case of Microsoft Project Management Software

ERIC Educational Resources Information Center

Abualbasal, Wejdan; Abu-Shanab, Emad; Al-Quraan, Heba

2016-01-01

The technology adoption domain is rich with studies that utilized a cross-sectional snapshot of subjects' perceptions regarding the adoption of new technology. This research tried to implement a longitudinal study that took three measures within 4 months to estimate the influence of time and experience on students' perceptions. The study adopted a…

User acceptance of a picture archiving and communication system. Applying the unified theory of acceptance and use of technology in a radiological setting.

PubMed

Duyck, P; Pynoo, B; Devolder, P; Voet, T; Adang, L; Vercruysse, J

2008-01-01

The aim of this study is to gain insight into the individual user acceptance of PACS by the radiology department staff of the Ghent University Hospital. Hereto a basic--direct effects only--form of UTAUT was assessed. Ninety-four questionnaires were distributed and 56 usable questionnaires were returned (19 radiologists - 37 technologists). The questionnaire consisted of scales of Venkatesh et al. [13] for performance expectancy (PE), effort expectancy (EE), facilitating conditions (FC), social influence (SI), self-efficacy (SE), attitude (ATT), anxiety (ANX) and behavioral intention (BI), and a scale of Moore et al. [22] to assess the perceived voluntariness of PACS-use. The reliability of all scales, except FC and voluntariness, was acceptable to good. The voluntariness scale was divided into a mandatoriness (MAN) and a voluntariness (VOL) measure. Both radiologists and technologists seem to welcome PACS, with radiologists having higher ratings on PE, EE, ATT, VOL and BI. Only PE and FC were salient for predicting BI, while EE and SI were not salient. Variance explained in behavioral intention to use PACS was 48%. Both radiologists and technologists were positive towards PACS and had strong intentions to use PACS. As other healthcare professionals, they appear to make their technology acceptance decision independent from their superiors, hereby focusing on usefulness rather than on ease of use. It is also important that support is supplied. Basic UTAUT is an adequate model to assess technology acceptance in a radiological setting.

Technology as a Double-Edged Sword: From Behavior Prediction with UTAUT to Students' Outcomes Considering Personal Characteristics

ERIC Educational Resources Information Center

Khechine, Hager; Lakhal, Sawsen

2018-01-01

Aim/Purpose: We aim to bring a better understanding of technology use in the educational context. More specifically, we investigate the determinants of webinar acceptance by university students and the effects of this acceptance on students' outcomes in the presence of personal characteristics such as anxiety, attitude, computer self-efficacy, and…

Examining Internet Usage Demographic Differences and the Relationship between Internet Usage and Business Outcomes in Sierra Leone

ERIC Educational Resources Information Center

Kamara, Mohamed K.

2013-01-01

This study utilized the unified theory of acceptance and use of technology (UTAUT) to determine Internet users' perceptions and behavioral intentions to accept Wi-Fi technology deployment in Sierra Leone. The study sought to investigate (a) the Internet usage rates before and after Wi-Fi adaption in Freetown; (b) differences in Internet usage…

Empathic Technologies for Distance/Mobile Learning: An Empirical Research Based on the Unified Theory of Acceptance and Use of Technology (UTAUT)

ERIC Educational Resources Information Center

Isaias, Pedro; Reis, Francisco; Coutinho, Clara; Lencastre, Jose Alberto

2017-01-01

Purpose: This paper examines the acceptance, of a group of 79 students, of an educational forum, used for mobile and distance learning, that has been modified to include empathic characteristics and affective principles. Design/Methodology/Approach: With this study is proposed that the introduction of empathic and affective principles in…

A study on students' acceptance of mobile phone use to seek health information in South Africa.

PubMed

Cilliers, Liezel; Viljoen, Kim Lee-Anne; Chinyamurindi, Willie Tafadzwa

2018-05-01

In South Africa, inequitable access to healthcare information has made many young people with limited resources more vulnerable to health risks. Mobile phones present a unique opportunity to address this problem due to the high penetration of mobile phones in South Africa and the popularity of these devices among young adults. This research sought to examine the adoption of mobile phones to access health information among students at a traditional university in the Eastern Cape, South Africa. A cross-sectional survey approach was used to collect information from a convenience sample of 202 university students (58 males; 104 females), the majority (71.3%) of whom were aged between 18 and 27 years and of Black African ethnicity (75.2%). The unified theory of acceptance and use of technology (UTAUT) framework formed the theoretical foundation for the questionnaire. A research model was developed to test the hypotheses that behavioural intention to use a mobile phone to access health information would be influenced by: perceived usefulness (PU), perceived effort, social influence (SI), attitude towards technology (AT) and mobile phone experience. Factor analyses indicated that the research model explained 36% of the variance in behavioural intention to use mobile devices to search for health-related queries, with PU being the largest predictor, followed by mobile experience, SI, and AT. Perceived effort did not make a statistically significant contribution. Using mobile phones to disseminate health information to students is a useful, convenient, and cost-effective health-promotion strategy. This research has contributed to the body of knowledge concerning the applicability of the UTAUT framework to study the adoption of technology and provided useful information to guide future research and implementation of mHealth initiatives.

Experience, Adoption, and Technology: Exploring the Phenomenological Experiences of Faculty Involved in Online Teaching at One School of Public Health

ERIC Educational Resources Information Center

Kidd, Terry; Davis, Trina; Larke, Patricia

2016-01-01

Using the Unified Theory of Acceptance and Use of Technology (UTAUT) and Dewey's Theory of Experience, this phenomenological study explored the experiences of faculty who engaged in online teaching at one school of public health. Findings revealed that the experiences of public health faculty, who engaged in online teaching, are similar and…

UTAUT: Capturing Differences in Undergraduate versus Postgraduate Learning?

ERIC Educational Resources Information Center

McKeown, Tui; Anderson, Mary

2016-01-01

Purpose: While educators and students alike are increasingly moving to use on-line technologies, there is still much to be learned about how these tools influence student learning. The purpose of this paper is to present a comparative investigation of the online use of one undergraduate (UG) and two postgraduate (PG) student cohorts undertaking…

Understanding Early Childhood Student Teachers' Acceptance and Use of Interactive Whiteboard

ERIC Educational Resources Information Center

Wong, Kung-Teck; Russo, Sharon; McDowall, Janet

2013-01-01

Purpose: The purpose of this paper is to understand early childhood student teachers' self-reported acceptance and use of interactive whiteboard (IWB), by employing the Unified Theory of Acceptance and Use of Technology (UTAUT) as the research framework. Design/methodology/approach: A total of 112 student teachers enrolled in science-related…

Factors affecting the adoption of healthcare information technology.

PubMed

Phichitchaisopa, Nisakorn; Naenna, Thanakorn

2013-01-01

In order to improve the quality and performance of healthcare services, healthcare information technology is among the most important technology in healthcare supply chain management. This study sets out to apply and test the Unified Theory of Acceptance and Use of Technology (UTAUT), to examine the factors influencing healthcare Information Technology (IT) services. A structured questionnaire was developed and distributed to healthcare representatives in each province surveyed in Thailand. Data collected from 400 employees including physicians, nurses, and hospital staff members were tested the model using structural equation modeling technique. The results found that the factors with a significant effect are performance expectancy, effort expectancy and facilitating conditions. They were also found to have a significant impact on behavioral intention to use the acceptance healthcare technology. In addition, in Thai provincial areas, positive significance was found with two factors: social influence on behavioral intention and facilitating conditions to direct using behavior. Based on research findings, in order for healthcare information technology to be widely adopted and used by healthcare staffs in healthcare supply chain management, the healthcare organizational management should improve healthcare staffs' behavioral intention and facilitating conditions.

Factors affecting the adoption of healthcare information technology

PubMed Central

Phichitchaisopa, Nisakorn; Naenna, Thanakorn

2013-01-01

In order to improve the quality and performance of healthcare services, healthcare information technology is among the most important technology in healthcare supply chain management. This study sets out to apply and test the Unified Theory of Acceptance and Use of Technology (UTAUT), to examine the factors influencing healthcare Information Technology (IT) services. A structured questionnaire was developed and distributed to healthcare representatives in each province surveyed in Thailand. Data collected from 400 employees including physicians, nurses, and hospital staff members were tested the model using structural equation modeling technique. The results found that the factors with a significant effect are performance expectancy, effort expectancy and facilitating conditions. They were also found to have a significant impact on behavioral intention to use the acceptance healthcare technology. In addition, in Thai provincial areas, positive significance was found with two factors: social influence on behavioral intention and facilitating conditions to direct using behavior. Based on research findings, in order for healthcare information technology to be widely adopted and used by healthcare staffs in healthcare supply chain management, the healthcare organizational management should improve healthcare staffs' behavioral intention and facilitating conditions. PMID:26417235

Acceptance and Use of Lecture Capture System (LCS) in Executive Business Studies: Extending UTAUT2

ERIC Educational Resources Information Center

Farooq, Muhammad Shoaib; Salam, Maimoona; Jaafar, Norizan; Fayolle, Alain; Ayupp, Kartinah; Radovic-Markovic, Mirjana; Sajid, Ali

2017-01-01

Purpose: Adoption of latest technological advancements (e.g. lecture capture system) is a hallmark of market-driven private universities. Among many other distinguishing features, lecture capture system (LCS) is the one which is being offered to enhance the flexibility of learning environment for attracting executive business students. Majority of…

Modelling End-User of Electronic-Government Service: The Role of Information quality, System Quality and Trust

NASA Astrophysics Data System (ADS)

Witarsyah Jacob, Deden; Fudzee, Mohd Farhan Md; Aizi Salamat, Mohamad; Kasim, Shahreen; Mahdin, Hairulnizam; Azhar Ramli, Azizul

2017-08-01

Many governments around the world increasingly use internet technologies such as electronic government to provide public services. These services range from providing the most basic informational website to deploying sophisticated tools for managing interactions between government agencies and beyond government. Electronic government (e-government) aims to provide a more accurate, easily accessible, cost-effective and time saving for the community. In this study, we develop a new model of e-government adoption service by extending the Unified Theory of Acceptance and Use of Technology (UTAUT) through the incorporation of some variables such as System Quality, Information Quality and Trust. The model is then tested using a large-scale, multi-site survey research of 237 Indonesian citizens. This model will be validated by using Structural Equation Modeling (SEM). The result indicates that System Quality, Information Quality and Trust variables proven to effect user behavior. This study extends the current understanding on the influence of System Quality, Information Quality and Trust factors to researchers, practitioners, and policy makers.

Acceptance of clinical decision support surveillance technology in the clinical pharmacy.

PubMed

English, Dan; Ankem, Kalyani; English, Kathleen

2017-03-01

There are clinical and economic benefits to incorporating clinical decision support systems (CDSSs) in patient care interventions in the clinical pharmacy setting. However, user dissatisfaction and resistance to HIT can prevent optimal use of such systems, particularly when users employ system workarounds and overrides. The present study applied a modified version of the unified theory of acceptance and use of technology (UTAUT) to evaluate the disposition and satisfaction with CDSS among clinical pharmacists who perform surveillance to identify potential medication therapy interventions on patients in the hospital setting. A survey of clinical pharmacists (N = 48) was conducted. Partial least squares (PLS) regression was used to analyze the influence of the UTAUT-related variables on behavioral intention and satisfaction with CDSS among clinical pharmacists. While behavioral intention did not predict actual use of HIT, facilitating conditions had a direct effect on pharmacists' use of CDSS. Likewise, satisfaction with CDSS was found to have a direct effect on use, with more satisfied users being less inclined to employ workarounds or overrides of the system. Based on the findings, organizational structures that facilitate CDSS use and user satisfaction affect the extent to which pharmacy and health care management maximize use in the clinical pharmacy setting.

An exploration of chronic pain patients' perceptions of home telerehabilitation services.

PubMed

Cranen, Karlijn; Drossaert, Constance H C; Brinkman, Evelien S; Braakman-Jansen, Annemarie L M; Ijzerman, Maarten J; Vollenbroek-Hutten, Miriam M R

2012-12-01

To explore patients' perceptions regarding prospective telerehabilitation services and the factors that facilitate or impede patients' intentions to use these services. Using semi-structured interviews, patients reflected on the pros and cons of various scenarios of prospective telerehabilitation services. Patients' arguments were first arranged according to the Unified Theory of Acceptance and Use of Technology (UTAUT). Next, using inductive analysis, the data for each UTAUT component were analysed and arranged into subthemes. Twenty-five chronic pain patients were selected from a rehabilitation centre in the Netherlands. Overall, participants considered telerehabilitation helpful as a complementary or follow-up treatment, rather than an autonomous treatment. Arguments mainly related to the UTAUT constructs of 'performance expectancy' and 'facilitating conditions'. Patients valued the benefits such as reduced transportation barriers, flexible exercise hours and the possibility to better integrate skills into daily life. However, many patients feared a loss of treatment motivation and expressed concerns about both reduced fellow sufferer contact and reduced face-to-face therapist contact. Few arguments related to 'social norms' and 'effort expectancy'. The effect of telerehabilitation on healthcare strongly depends on patients' willingness to use. Our study showed that chronic pain patients valued the benefits of telerehabilitation but hesitate to use it as an autonomous treatment. Therefore, future initiatives should maintain traditional care to some degree and focus on patients' attitudes as well. Either by giving information to increase patients' confidence in telerehabilitation or by addressing reported drawbacks into the future design of these services. Further quantitative studies are needed to explore patients' intentions to use telerehabilitation. © 2011 Blackwell Publishing Ltd.

A qualitative, exploratory study of predominantly female parental perceptions of consumer health technology use by their overweight and/or obese female adolescent participating in a fee-based 4-week weight-management intervention.

PubMed

Knoblock-Hahn, Amy L; LeRouge, Cynthia M

2014-04-01

Consumer health technologies (CHTs) are a growing part of the continuum of care for self-management of overweight and obesity. Parents positively or negatively influence adolescent weight-management efforts and are especially important throughout continuum of care settings. User-centered design (UCD) applications have been developed to assist primary users, such as adolescents, with their weight management, but less is known about the influence of parents as secondary users across many socio-ecological environments. The purpose of this study was to use the Unified Theory of Acceptance and Use of Technology (UTAUT) to inform the design of a UCD application in a qualitative study that sought to determine parental views on how technology can support previously learned behaviors that require ongoing management and support beyond formal lifestyle interventions. Parents of overweight and obese adolescents (n=14) were interviewed about perceived usefulness and planned user-intent of CHT that was designed for adolescents. UTAUT provided theoretical parental constructs (intention, performance and effort expectancy, and social influence) interactions within several socio-ecological contexts, including the home food environment and restaurant dining experiences. Although generalizations of this qualitative study are limited by a small sample size with predominantly mothers (n=13) of overweight and obese daughters (n=12), the exploratory inquiry using a parent as a secondary consumer user can complement the adoption of applications designed by adolescents. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Omnichannel Customer Behavior: Key Drivers of Technology Acceptance and Use and Their Effects on Purchase Intention

PubMed Central

Juaneda-Ayensa, Emma; Mosquera, Ana; Sierra Murillo, Yolanda

2016-01-01

The advance of the Internet and new technologies over the last decade has transformed the retailing panorama. More and more channels are emerging, causing consumers to change their habits and shopping behavior. An omnichannel strategy is a form of retailing that, by enabling real interaction, allows customers to shop across channels anywhere and at any time, thereby providing them with a unique, complete, and seamless shopping experience that breaks down the barriers between channels. This paper aims to identify the factors that influence omnichannel consumers' behavior through their acceptance of and intention to use new technologies during the shopping process. To this end, an original model was developed to explain omnichannel shopping behavior based on the variables used in the UTAUT2 model and two additional factors: personal innovativeness and perceived security. The model was tested with a sample of 628 Spanish customers of the store Zara who had used at least two channels during their most recent shopping journey. The results indicate that the key determinants of purchase intention in an omnichannel context are, in order of importance: personal innovativeness, effort expectancy, and performance expectancy. The theoretical and managerial implications are discussed. PMID:27516749

Omnichannel Customer Behavior: Key Drivers of Technology Acceptance and Use and Their Effects on Purchase Intention.

PubMed

Juaneda-Ayensa, Emma; Mosquera, Ana; Sierra Murillo, Yolanda

2016-01-01

The advance of the Internet and new technologies over the last decade has transformed the retailing panorama. More and more channels are emerging, causing consumers to change their habits and shopping behavior. An omnichannel strategy is a form of retailing that, by enabling real interaction, allows customers to shop across channels anywhere and at any time, thereby providing them with a unique, complete, and seamless shopping experience that breaks down the barriers between channels. This paper aims to identify the factors that influence omnichannel consumers' behavior through their acceptance of and intention to use new technologies during the shopping process. To this end, an original model was developed to explain omnichannel shopping behavior based on the variables used in the UTAUT2 model and two additional factors: personal innovativeness and perceived security. The model was tested with a sample of 628 Spanish customers of the store Zara who had used at least two channels during their most recent shopping journey. The results indicate that the key determinants of purchase intention in an omnichannel context are, in order of importance: personal innovativeness, effort expectancy, and performance expectancy. The theoretical and managerial implications are discussed.

Factors influencing the adoption of health information technologies: a systematic review

PubMed Central

Garavand, Ali; Mohseni, Mohammah; Asadi, Heshmatollah; Etemadi, Manal; Moradi-Joo, Mohammad; Moosavi, Ahmad

2016-01-01

Introduction The successful implementation of health information technologies requires investigating the factors affecting the acceptance and use of them. The aim of this study was to determine the most important factors affecting the adoption of health information technologies by doing a systematic review on the factors affecting the acceptance of health information technology. Methods This systematic review was conducted by searching the major databases, such as Google Scholar, Emerald, Science Direct, Web of Science, Pubmed, and Scopus. We used various keywords, such as adoption, use, acceptance of IT in medicine, hospitals, and IT theories in health services, and we also searched on the basis of several important technologies, such as Electronic Health Records (HER), Electronic Patient Records (EPR), Electronic Medical Records (EMR), Computerized Physician Order Entry (CPOE), Hospital Information System (HIS), Picture Archiving and Communication System (PACS), and others in the 2004–2014 period. Results The technology acceptance model (TAM) is the most important model used to identify the factors influencing the adoption of information technologies in the health system; also, the unified theory of acceptance and use of technology (UTAUT) model has had a lot of applications in recent years in the health system. Ease of use, usefulness, social impact, facilitating conditions, attitudes and behavior of users are effective in the adoption of health information technologies. Conclusion By considering various factors, including ease of use, usefulness, and social impact, the rate of the adoption of health information technology can be increased. PMID:27757179

Factors influencing the adoption of health information technologies: a systematic review.

PubMed

Garavand, Ali; Mohseni, Mohammah; Asadi, Heshmatollah; Etemadi, Manal; Moradi-Joo, Mohammad; Moosavi, Ahmad

2016-08-01

The successful implementation of health information technologies requires investigating the factors affecting the acceptance and use of them. The aim of this study was to determine the most important factors affecting the adoption of health information technologies by doing a systematic review on the factors affecting the acceptance of health information technology. This systematic review was conducted by searching the major databases, such as Google Scholar, Emerald, Science Direct, Web of Science, Pubmed, and Scopus. We used various keywords, such as adoption, use, acceptance of IT in medicine, hospitals, and IT theories in health services, and we also searched on the basis of several important technologies, such as Electronic Health Records (HER), Electronic Patient Records (EPR), Electronic Medical Records (EMR), Computerized Physician Order Entry (CPOE), Hospital Information System (HIS), Picture Archiving and Communication System (PACS), and others in the 2004-2014 period. The technology acceptance model (TAM) is the most important model used to identify the factors influencing the adoption of information technologies in the health system; also, the unified theory of acceptance and use of technology (UTAUT) model has had a lot of applications in recent years in the health system. Ease of use, usefulness, social impact, facilitating conditions, attitudes and behavior of users are effective in the adoption of health information technologies. By considering various factors, including ease of use, usefulness, and social impact, the rate of the adoption of health information technology can be increased.

An exploration of chronic pain patients’ perceptions of home telerehabilitation services

PubMed Central

Cranen, Karlijn; Drossaert, Constance H. C.; Brinkman, Evelien S.; Braakman‐Jansen, Annemarie L. M.; IJzerman, Maarten J.; Vollenbroek‐Hutten, Miriam M. R.

2011-01-01

Abstract Objectives  To explore patients’ perceptions regarding prospective telerehabilitation services and the factors that facilitate or impede patients’ intentions to use these services. Design  Using semi‐structured interviews, patients reflected on the pros and cons of various scenarios of prospective telerehabilitation services. Patients’ arguments were first arranged according to the Unified Theory of Acceptance and Use of Technology (UTAUT). Next, using inductive analysis, the data for each UTAUT component were analysed and arranged into subthemes. Setting and participants  Twenty‐five chronic pain patients were selected from a rehabilitation centre in the Netherlands. Results  Overall, participants considered telerehabilitation helpful as a complementary or follow‐up treatment, rather than an autonomous treatment. Arguments mainly related to the UTAUT constructs of ‘performance expectancy’ and ‘facilitating conditions’. Patients valued the benefits such as reduced transportation barriers, flexible exercise hours and the possibility to better integrate skills into daily life. However, many patients feared a loss of treatment motivation and expressed concerns about both reduced fellow sufferer contact and reduced face‐to‐face therapist contact. Few arguments related to ‘social norms’ and ‘effort expectancy’. Conclusions  The effect of telerehabilitation on healthcare strongly depends on patients’ willingness to use. Our study showed that chronic pain patients valued the benefits of telerehabilitation but hesitate to use it as an autonomous treatment. Therefore, future initiatives should maintain traditional care to some degree and focus on patients’ attitudes as well. Either by giving information to increase patients’ confidence in telerehabilitation or by addressing reported drawbacks into the future design of these services. Further quantitative studies are needed to explore patients’ intentions to use telerehabilitation. PMID:21348905

Towards reinforcing telemedicine adoption amongst clinicians in Nigeria.

PubMed

Adenuga, Kayode I; Iahad, Noorminshah A; Miskon, Suraya

2017-08-01

Telemedicine systems have been considered as a necessary measure to alleviate the shortfall in skilled medical specialists in developing countries. However, the obvious challenge is whether clinicians are willing to use this technological innovation, which has aided medical practice globally. One factor which has received little academic attention is the provision of suitable encouragement for clinicians to adopt telemedicine, in the form of rewards, motivation or incentives. A further consideration for telemedicine usage in developing countries, especially sub-Saharan Africa and Nigeria in particular, are to the severe shortage of available practising clinicians. The researchers therefore explore the need to positively reinforce the adoption of telemedicine amongst clinicians in Nigeria, and also offer a rationale for this using the UTAUT model. Data were collected using a structured paper-based questionnaire, with 252 physicians and nurses from six government hospitals in Ondo state, Nigeria. The study applied SmartPLS 2.0 for analysis to determine the relationship between six variables. Demographic moderating variables, age, gender and profession, were included. The results indicate that performance expectancy (p<0.05), effort expectancy (p<0.05), facilitating condition (p<0.01) and reinforcement factor (p<0.001) have significant effects on clinicians' behavioural intention to use telemedicine systems, as predicted using the extended UTAUT model. Our results showed that the use of telemedicine by clinicians in the Nigerian context is perceived as a dual responsibility which requires suitable reinforcement. In addition, performance expectancy, effort expectancy, facilitating condition and reinforcement determinants are influential factors in the use of telemedicine services for remote-patient clinical diagnosis and management by the Nigerian clinicians. Copyright © 2017. Published by Elsevier B.V.

Older Adults' Perceptions of the UTAUT2 Factors Related to Intention to Use a Patient Portal for Engagement in Their Healthcare

ERIC Educational Resources Information Center

Arauwou, Joyce Adenike

2017-01-01

The evolution of patient engagement in patient-centered care has led to the development of online personal health record (PHR) systems, which are accessed through use of a patient portal. Researchers have found that older adults are among those yet to adopt its use. The UTAUT2 factors are used to help understand an individual's intention to use…

The intention to use HIV-pre-exposure prophylaxis (PrEP) among men who have sex with men in Switzerland: testing an extended explanatory model drawing on the unified theory of acceptance and use of technology (UTAUT).

PubMed

Nideröst, Sibylle; Gredig, Daniel; Hassler, Benedikt; Uggowitzer, Franziska; Weber, Patrick

2018-01-01

The aim of this study was to determine the intention to use pre-exposure prophylaxis (PrEP) when available and to identify predictors of the intention to use PrEP among men who have sex with men (MSM) living in Switzerland. The theoretical model drew on the Unified Theory of Acceptance and Use of Technology and considered additional variables related specifically to PrEP, HIV protection and the resources of MSM. For data collection, we used an anonymous, standardized self-administered online questionnaire. In 2015, we gathered a convenience sample of 556 HIV-negative MSM living in Switzerland. We analyzed the data using descriptive and bivariate statistics and used structural equation modeling to test the hypothesized model. Predictors of respondents' moderate intention to use PrEP were performance expectancy, effort expectancy, perceived social influence, concerns about using PrEP, attitudes toward condom use, negative experiences of condom use and age. These variables were predicted by HIV protection-related aspects and resources. The findings provide insights into the complex dynamic underlying the intention to use PrEP.

Preservice Teachers' Acceptance of Learning Management Software: An Application of the UTAUT2 Model

ERIC Educational Resources Information Center

Raman, Arumugam; Don, Yahya

2013-01-01

"Moodle" also known as Learning Management System is freely available to educators. Universiti Utara Malaysia (UUM) encourages students and instructors to utilize the teaching and learning process. Moodle enables lecturer to create sequences and facilitate activities for their students, auto-marked online quizzes and exams, navigation…

Verification of Social Network Site Use Behavior of the University Physical Education Students

ERIC Educational Resources Information Center

Liu, Li-Wei; Chang, Chia-Ming; Huang, Hsiu-Chin; Chang, Yu-Liang

2016-01-01

This study aims to explore the relationships among performance expectancy, effort expectancy, social influence, facilitating condition, behavioral intention and use behavior of university physical education students in Taiwan. Moreover, it also intends to examine the moderating effects of gender, age, and experience on the UTAUT model. The targets…

Analysis of the factors influencing healthcare professionals' adoption of mobile electronic medical record (EMR) using the unified theory of acceptance and use of technology (UTAUT) in a tertiary hospital.

PubMed

Kim, Seok; Lee, Kee-Hyuck; Hwang, Hee; Yoo, Sooyoung

2016-01-30

Although the factors that affect the end-user's intention to use a new system and technology have been researched, the previous studies have been theoretical and do not verify the factors that affected the adoption of a new system. Thus, this study aimed to confirm the factors that influence users' intentions to utilize a mobile electronic health records (EMR) system using both a questionnaire survey and a log file analysis that represented the real use of the system. After observing the operation of a mobile EMR system in a tertiary university hospital for seven months, we performed an offline survey regarding the user acceptance of the system based on the Unified Theory of Acceptance and Use of Technology (UTAUT) and the Technology Acceptance Model (TAM). We surveyed 942 healthcare professionals over two weeks and performed a structural equation modeling (SEM) analysis to identify the intention to use the system among the participants. Next, we compared the results of the SEM analysis with the results of the analyses of the actual log files for two years to identify further insights into the factors that affected the intention of use. For these analyses, we used SAS 9.0 and AMOS 21. Of the 942 surveyed end-users, 48.3 % (23.2 % doctors and 68.3 % nurses) responded. After eliminating six subjects who completed the survey insincerely, we conducted the SEM analyses on the data from 449 subjects (65 doctors and 385 nurses). The newly suggested model satisfied the standards of model fitness, and the intention to use it was especially high due to the influences of Performance Expectancy on Attitude and Attitude. Based on the actual usage log analyses, both the doctors and nurses used the menus to view the inpatient lists, alerts, and patients' clinical data with high frequency. Specifically, the doctors frequently retrieved laboratory results, and the nurses frequently retrieved nursing notes and used the menu to assume the responsibilities of nursing work. In this study, the end-users' intentions to use the mobile EMR system were particularly influenced by Performance Expectancy and Attitude. In reality, the usage log revealed high-frequency use of the functions to improve the continuity of care and work efficiency. These results indicate the influence of the factor of performance expectancy on the intention to use the mobile EMR system. Consequently, we suggest that when determining the implementation of mobile EMR systems, the functions that are related to workflow with ability to increase performance should be considered first.

Using the UTAUT Model to Examine the Acceptance Behavior of Synchronous Collaboration to Support Peer Translation

ERIC Educational Resources Information Center

Liu, Yi Chun; Huang, Yong-Ming

2015-01-01

The teaching of translation has received considerable attention in recent years. Research on translation in collaborative learning contexts, however, has been less studied. In this study, we use a tool of synchronous collaboration to assist students in experiencing a peer translation process. Afterward, the unified theory of acceptance and use of…

Student Real-Time Visualization System in Classroom Using RFID Based on UTAUT Model

ERIC Educational Resources Information Center

Raja Yusof, Raja Jamilah; Qazi, Atika; Inayat, Irum

2017-01-01

Purpose: The purpose of this paper is to monitor in-class activities and the performance of the students. Design/methodology/approach: A pilot study was conducted to evaluate the proposed system using a questionnaire with 132 participants (teachers and non-teachers) in a presentation style to record the participant's perception about performance…

Personal and other factors affecting acceptance of smartphone technology by older Chinese adults.

PubMed

Ma, Qi; Chan, Alan H S; Chen, Ke

2016-05-01

It has been well documented that in the 21st century, there will be relatively more older people around the world than in the past. Also, it seems that technology will expand in this era at an unprecedented rate. Therefore, it is of critical importance to understand the factors that influence the acceptance of technology by older people. The positive impact that the use of mobile applications can have for older people was confirmed by a previous study (Plaza et al., 2011). The study reported here aimed to explore and confirm, for older adults in China, the key influential factors of smartphone acceptance, and to describe the personal circumstances of Chinese older adults who use smartphone. A structured questionnaire and face to face individual interviews were used with 120 Chinese older adults (over 55). Structural Equation Modeling was used to confirm a proposed smartphone acceptance model based on Technology Acceptance Model (TAM), and the Unified Theory of Acceptance and Use of Technology (UTAUT). The results showed that those who were younger, with higher education, non-widowed, with better economic condition related to salary or family support were more likely to use smartphone. Also, cost was found to be a critical factor influencing behavior intention. Self-satisfaction and facilitating conditions were proved to be important factors influencing perceived usefulness and perceived ease of use. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Acceptance and Usability of OER in Indian Higher Education: An Investigation Using UTAUT Model

ERIC Educational Resources Information Center

Padhi, Nayantara

2018-01-01

In the global movement towards open knowledge society, open educational resources (OER) have become a prominent contributor as a medium of education, research and training. In India, the phenomenon of OER is still in nascent stage. Although the country has been massively investing on growth and usage of ICT, it still requires acceptance of OER as…

Acceptance and barriers to access of occupational e-mental health: cross-sectional findings from a health-risk population of employees.

PubMed

Hennemann, Severin; Witthöft, Michael; Bethge, Matthias; Spanier, Katja; Beutel, Manfred E; Zwerenz, Rüdiger

2018-04-01

Occupational e-mental-health (OEMH) may extend existing instruments for preservation or restoration of health and work ability. As a key precondition to efficient implementation, this study examined acceptance and person-centered barriers to potential uptake of OEMH for work-related distress in employees with an elevated risk of early retirement. Within the framework of the "Third German Sociomedical Panel of Employees", 1829 employees with prior sickness absence payments filled out a self-administered questionnaire. Participants had a mean age of 49.93 years (SD = 4.06). 6.2% indicated prior use of eHealth interventions. Potential predictors of acceptance of OEMH were examined based on the "Unified Theory of Acceptance and Use of Technology" (UTAUT) extended by work ability, mental health, eHealth literacy and demographic characteristics. 89.1% (n = 1579) showed low to moderate acceptance (M = 2.20, SD = 1.05, range 1-5). A path analysis revealed significant, positive direct effects of UTAUT predictors on acceptance (performance expectancy: 0.48, SE = 0.02, p < 0.001; effort expectancy: 0.20, SE = 0.02, p < 0.001; social influence: 0.28, SE = 0.02, p < 0.001).Online time and frequency of online health information search were further positive direct predictors of acceptance. Model fit was good [χ 2 (7) = 12.91, p = 0.07, RMSEA = 0.02, CFI = 1.00, TLI = 0.99, SRMR = 0.01]. Attitudes towards OEMH are rather disadvantageous in the studied risk group. Implementation of OEMH, therefore, requires a-priori education including promotion of awareness, favorable attitudes regarding efficacy and usability in a collaborative approach.

Exploring Midwives' Need and Intention to Adopt Electronic Integrated Antenatal Care.

PubMed

Markam, Hosizah; Hochheiser, Harry; Kuntoro, Kuntoro; Notobroto, Hari Basuki

2018-01-01

Documentation requirements for the Indonesian integrated antenatal care (ANC) program suggest the need for electronic systems to address gaps in existing paper documentation practices. Our goals were to quantify midwives' documentation completeness in a primary healthcare center, understand documentation challenges, develop a tool, and assess intention to use the tool. We analyzed existing ANC records in a primary healthcare center in Bangkalan, East Java, and conducted interviews with stakeholders to understand needs for an electronic system in support of ANC. Development of the web-based Electronic Integrated ANC (e-iANC) system used the System Development Life Cycle method. Training on the use of the system was held in the computer laboratory for 100 midwives chosen from four primary healthcare centers in each of five regions. The Unified Theory of Acceptance and Use of Technology (UTAUT) questionnaire was used to assess their intention to adopt e-iANC. The midwives' intention to adopt e-iANC was significantly influenced by performance expectancy, effort expectancy and facilitating conditions. Age, education level, and computer literacy did not significantly moderate the effects of performance expectancy and effort expectancy on adoption intention. The UTAUT results indicated that the factors that might influence intention to adopt e-iANC are potentially addressable. Results suggest that e-iANC might well be accepted by midwives.

Factors influencing nurses' acceptance of hospital information systems in Iran: application of the Unified Theory of Acceptance and Use of Technology.

PubMed

Sharifian, Roxana; Askarian, Fatemeh; Nematolahi, Mohtaram; Farhadi, Payam

User acceptance is a precondition for successful implementation of hospital information systems (HISs). Increasing investment in information technology by healthcare organisations internationally has made user acceptance an important issue in technology implementation and management. Despite the increased focus on hospital information systems, there continues to be user resistance. The present study aimed to investigate the factors affecting hospital information systems nurse-user acceptance of HISs, based on the Unified Theory of Acceptance and Use of Technology (UTAUT), in the Shiraz University of Medical Sciences teaching hospitals. A descriptive-analytical research design was employed to study nurses' adoption and use of HISs. Data collection was undertaken using a cross-sectional survey of nurses (n=303). The research model was examined using the LISREL path confirmatory modeling. The results demonstrated that the nurses' behavioural intention (BI) to use hospital information systems was predicted by Performance Expectancy (PE) (β= 2.34, p<0.01), Effort Expectancy (EE) (β= 2.21, p<0.01), Social Influence (SI) (β= 2.63, p<0.01) and Facilitating Conditions (FC) (β= 2.84, p<0.01). The effects of these antecedents of BI explained 72.8% of the variance in nurses' intention to use hospital information systems (R2 = 0.728). Application of the research model suggested that nurses' acceptance of HISs was influenced by performance expectancy, effort expectancy, social influence and facilitating conditions, with performance expectancy having the strongest effect on user intention.

Community-Based ECG Monitoring System for Patients with Cardiovascular Diseases.

PubMed

Lin, Bor-Shyh; Wong, Alice M; Tseng, Kevin C

2016-04-01

This study aims to develop a community-based electrocardiogram (ECG) monitoring system for cardiac outpatients to wirelessly detect heart rate, provide personalized healthcare, and enhance interactive social contact because of the prevalence of deaths from cardiovascular disease and the growing problem of aging in the world. The system not only strengthens the performance of the ECG monitoring system but also emphasizes the ergonomic design of wearable devices and user interfaces. In addition, it enables medical professionals to diagnose cardiac symptoms remotely and electronically manage medical reports and suggestions. The experimental result shows high performance of the dry electrode, even in dynamic conditions. The comparison result with different ECG healthcare systems shows the essential factors that the system should possess and the capability of the proposed system. Finally, a user survey was conducted based on the unified theory of acceptance and users of technology (UTAUT) model.

Exploring Midwives' Need and Intention to Adopt Electronic Integrated Antenatal Care

PubMed Central

Markam, Hosizah; Hochheiser, Harry; Kuntoro, Kuntoro; Notobroto, Hari Basuki

2018-01-01

Documentation requirements for the Indonesian integrated antenatal care (ANC) program suggest the need for electronic systems to address gaps in existing paper documentation practices. Our goals were to quantify midwives' documentation completeness in a primary healthcare center, understand documentation challenges, develop a tool, and assess intention to use the tool. We analyzed existing ANC records in a primary healthcare center in Bangkalan, East Java, and conducted interviews with stakeholders to understand needs for an electronic system in support of ANC. Development of the web-based Electronic Integrated ANC (e-iANC) system used the System Development Life Cycle method. Training on the use of the system was held in the computer laboratory for 100 midwives chosen from four primary healthcare centers in each of five regions. The Unified Theory of Acceptance and Use of Technology (UTAUT) questionnaire was used to assess their intention to adopt e-iANC. The midwives' intention to adopt e-iANC was significantly influenced by performance expectancy, effort expectancy and facilitating conditions. Age, education level, and computer literacy did not significantly moderate the effects of performance expectancy and effort expectancy on adoption intention. The UTAUT results indicated that the factors that might influence intention to adopt e-iANC are potentially addressable. Results suggest that e-iANC might well be accepted by midwives. PMID:29618961

Electronic Health Record Patient Portal Adoption by Health Care Consumers: An Acceptance Model and Survey.

PubMed

Tavares, Jorge; Oliveira, Tiago

2016-03-02

The future of health care delivery is becoming more citizen centered, as today's user is more active, better informed, and more demanding. Worldwide governments are promoting online health services, such as electronic health record (EHR) patient portals and, as a result, the deployment and use of these services. Overall, this makes the adoption of patient-accessible EHR portals an important field to study and understand. The aim of this study is to understand the factors that drive individuals to adopt EHR portals. We applied a new adoption model using, as a starting point, Ventkatesh's Unified Theory of Acceptance and Use of Technology in a consumer context (UTAUT2) by integrating a new construct specific to health care, a new moderator, and new relationships. To test the research model, we used the partial least squares (PLS) causal modelling approach. An online questionnaire was administrated. We collected 360 valid responses. The statistically significant drivers of behavioral intention are performance expectancy (beta=.200; t=3.619), effort expectancy (beta=.185; t=2.907), habit (beta=.388; t=7.320), and self-perception (beta=.098; t=2.285). The predictors of use behavior are habit (beta=0.206; t=2.752) and behavioral intention (beta=0.258; t=4.036). The model explained 49.7% of the variance in behavioral intention and 26.8% of the variance in use behavior. Our research helps to understand the desired technology characteristics of EHR portals. By testing an information technology acceptance model, we are able to determine what is more valued by patients when it comes to deciding whether to adopt EHR portals or not. The inclusion of specific constructs and relationships related to the health care consumer area also had a significant impact on understanding the adoption of EHR portals.

Facilitators and Barriers of Electronic Health Record Patient Portal Adoption by Older Adults: A Literature Study.

PubMed

Wildenbos, Gaby Anne; Peute, Linda; Jaspers, Monique

2017-01-01

Patient portal usage by older adults, patients aged 50 years old and above, is intended to improve their access and quality of care. Acceptance of patient portals by this target group is low. This paper discusses the results of a literature review to determine the facilitators and barriers that drive or inhibit older patients to adopt patient portals. Articles were included when they described an acceptance, adoption or usability evaluation study of a patient portal. From a total of 245 potentially relevant articles, 8 articles were finally included. We used the Unified Theory of Acceptance and Use of Technology (UTAUT) as a classification model to analyze factors influencing older adults' acceptance of patient portals. Main facilitators for acceptance were 'performance expectancy' and 'voluntariness of use' related to a higher level of education and experienced health. Main barriers were limited health literacy and motivation related to involuntariness to use a patient portal. Poor facilitation conditions (limited technology access and no prior knowledge on existence of a patient portal) hampered access to a portal. More thorough insight into the latter is needed to improve the reach and effectiveness of patient portals among older patients.

Behavioral analysis of use personal service e-balance Indonesian social security

NASA Astrophysics Data System (ADS)

Wang, Gunawan; Fitriani, Novi; Nurul Fajar, Ahmad

2017-09-01

Indonesian Social Security is the one of the government agencies that is trusted to organize social security. With help of Information technology that growing these day, Indonesian Social Security is also developing E-Balance application, where previously all activities for checking balance is done by giving their slip details through the nearest branch to be distributed to each company. So far there is no research that reviewing e-Balance. Hence, the authors is interested to do research related factors that influence the behavior of the use of E-Balance Indonesian Social Security in the Jakarta area and model that can describe those factors Authors distributing questioners to 193 respondents and perform data processing. The result of this study is to know the factors that influence the behavior of use Personal Service E-Balance Indonesian Social Security and model that can describe those factors. The result shows that UTAUT 2 model is not match with this research and need to be enhanced. After enhancement, there are 3 factors that being significant. Such as Behavioral Intention, Effort Expectancy and Social Influence while the others are not supported and need to be customize.

Facilitators and Barriers to Adopting Robotic-Assisted Surgery: Contextualizing the Unified Theory of Acceptance and Use of Technology

PubMed Central

BenMessaoud, Christine; Kharrazi, Hadi; MacDorman, Karl F.

2011-01-01

Robotic-assisted surgical techniques are not yet well established among surgeon practice groups beyond a few surgical subspecialties. To help identify the facilitators and barriers to their adoption, this belief-elicitation study contextualized and supplemented constructs of the unified theory of acceptance and use of technology (UTAUT) in robotic-assisted surgery. Semi-structured individual interviews were conducted with 21 surgeons comprising two groups: users and nonusers. The main facilitators to adoption were Perceived Usefulness and Facilitating Conditions among both users and nonusers, followed by Attitude Toward Using Technology among users and Extrinsic Motivation among nonusers. The three main barriers to adoption for both users and nonusers were Perceived Ease of Use and Complexity, Perceived Usefulness, and Perceived Behavioral Control. This study's findings can assist surgeons, hospital and medical school administrators, and other policy makers on the proper adoption of robotic-assisted surgery and can guide future research on the development of theories and framing of hypotheses. PMID:21283719

Electronic Health Record Patient Portal Adoption by Health Care Consumers: An Acceptance Model and Survey

PubMed Central

2016-01-01

Background The future of health care delivery is becoming more citizen centered, as today’s user is more active, better informed, and more demanding. Worldwide governments are promoting online health services, such as electronic health record (EHR) patient portals and, as a result, the deployment and use of these services. Overall, this makes the adoption of patient-accessible EHR portals an important field to study and understand. Objective The aim of this study is to understand the factors that drive individuals to adopt EHR portals. Methods We applied a new adoption model using, as a starting point, Ventkatesh's Unified Theory of Acceptance and Use of Technology in a consumer context (UTAUT2) by integrating a new construct specific to health care, a new moderator, and new relationships. To test the research model, we used the partial least squares (PLS) causal modelling approach. An online questionnaire was administrated. We collected 360 valid responses. Results The statistically significant drivers of behavioral intention are performance expectancy (beta=.200; t=3.619), effort expectancy (beta=.185; t=2.907), habit (beta=.388; t=7.320), and self-perception (beta=.098; t=2.285). The predictors of use behavior are habit (beta=0.206; t=2.752) and behavioral intention (beta=0.258; t=4.036). The model explained 49.7% of the variance in behavioral intention and 26.8% of the variance in use behavior. Conclusions Our research helps to understand the desired technology characteristics of EHR portals. By testing an information technology acceptance model, we are able to determine what is more valued by patients when it comes to deciding whether to adopt EHR portals or not. The inclusion of specific constructs and relationships related to the health care consumer area also had a significant impact on understanding the adoption of EHR portals. PMID:26935646

Electronic Health Record Portal Adoption: a cross country analysis.

PubMed

Tavares, Jorge; Oliveira, Tiago

2017-07-05

This study's goal is to understand the factors that drive individuals to adopt Electronic Health Record (EHR) portals and to estimate if there are differences between countries with different healthcare models. We applied a new adoption model using as a starting point the extended Unified Theory of Acceptance and Use of Technology (UTAUT2) by incorporating the Concern for Information Privacy (CFIP) framework. To evaluate the research model we used the partial least squares (PLS) - structural equation modelling (SEM) approach. An online questionnaire was administrated in the United States (US) and Europe (Portugal). We collected 597 valid responses. The statistically significant factors of behavioural intention are performance expectancy ([Formula: see text] total  = 0.285; P < 0.01), effort expectancy ([Formula: see text] total  = 0.160; P < 0.01), social influence ([Formula: see text] total  = 0.198; P < 0.01), hedonic motivation ([Formula: see text] total  = -0.141; P < 0.01), price value ([Formula: see text] total  = 0.152; P < 0.01), and habit ([Formula: see text] total  = 0.255; P < 0.01). The predictors of use behaviour are habit ([Formula: see text] total  = 0.145; P < 0.01), and behavioural intention ([Formula: see text] total  = 0.480; P < 0.01). Social influence, hedonic motivation, and price value are only predictors in the US group. The model explained 53% of the variance in behavioural intention and 36% of the variance in use behaviour. Our study identified critical factors for the adoption of EHR portals and significant differences between the countries. Confidentiality issues do not seem to influence acceptance. The EHR portals usage patterns are significantly higher in US compared to Portugal.

Greater Patient Health Information Control to Improve the Sustainability of Health Information Exchanges.

PubMed

Abdelhamid, Mohamed

2018-06-09

Health information exchanges (HIEs) are multisided platforms that facilitate the sharing of patient health information (PHI) between providers and payers across organizations within a region, community or hospital system. The benefits of HIEs to payers and providers include lower cost, faster services, and better health outcome. However, most HIEs have configured the patient healthcare consent process to give all providers who sign up with the exchange access to PHI for all consenting patients, leaving no control to patients in customized what information to share and with who. This research investigates the impact of granting greater control to patients in sharing their personal health information on consent rates and making them active participants in the HIEs system. This research utilizes a randomized experimental survey design study. The study uses responses from 388 participants and structural equation modeling (SEM) to test the conceptual model. The main findings of this research include that patients consent rate increases significantly when greater control in sharing PHI is offered to the patient. In addition, greater control reduces the negative impact of privacy concern on the intention to consent. Similarly, trust in healthcare professionals leads to higher consent when greater control is offered to the patient. Thus, greater control empowers the role of trust in engaging patients and sustaining HIEs. The paper makes a theoretical contribution to research by extending the unified theory of acceptance and use of technology (UTAUT) model. The findings impact practice by providing insights that will help sustain HIEs. Copyright © 2018. Published by Elsevier Inc.

Consumer Adoption of Future MyData-Based Preventive eHealth Services: An Acceptance Model and Survey Study.

PubMed

Koivumäki, Timo; Pekkarinen, Saara; Lappi, Minna; Väisänen, Jere; Juntunen, Jouni; Pikkarainen, Minna

2017-12-22

Constantly increasing health care costs have led countries and health care providers to the point where health care systems must be reinvented. Consequently, electronic health (eHealth) has recently received a great deal of attention in social sciences in the domain of Internet studies. However, only a fraction of these studies focuses on the acceptability of eHealth, making consumers' subjective evaluation an understudied field. This study will address this gap by focusing on the acceptance of MyData-based preventive eHealth services from the consumer point of view. We are adopting the term "MyData", which according to a White Paper of the Finnish Ministry of Transport and Communication refers to "1) a new approach, a paradigm shift in personal data management and processing that seeks to transform the current organization centric system to a human centric system, 2) to personal data as a resource that the individual can access and control." The aim of this study was to investigate what factors influence consumers' intentions to use a MyData-based preventive eHealth service before use. We applied a new adoption model combining Venkatesh's unified theory of acceptance and use of technology 2 (UTAUT2) in a consumer context and three constructs from health behavior theories, namely threat appraisals, self-efficacy, and perceived barriers. To test the research model, we applied structural equation modeling (SEM) with Mplus software, version 7.4. A Web-based survey was administered. We collected 855 responses. We first applied traditional SEM for the research model, which was not statistically significant. We then tested for possible heterogeneity in the data by running a mixture analysis. We found that heterogeneity was not the cause for the poor performance of the research model. Thus, we moved on to model-generating SEM and ended up with a statistically significant empirical model (root mean square error of approximation [RMSEA] 0.051, Tucker-Lewis index [TLI] 0.906, comparative fit index [CFI] 0.915, and standardized root mean square residual 0.062). According to our empirical model, the statistically significant drivers for behavioral intention were effort expectancy (beta=.191, P<.001), self-efficacy (beta=.449, P<.001), threat appraisals (beta=.416, P<.001), and perceived barriers (beta=-.212, P=.009). Our research highlighted the importance of health-related factors when it comes to eHealth technology adoption in the consumer context. Emphasis should especially be placed on efforts to increase consumers' self-efficacy in eHealth technology use and in supporting healthy behavior. ©Timo Koivumäki, Saara Pekkarinen, Minna Lappi, Jere Väisänen, Jouni Juntunen, Minna Pikkarainen. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 22.12.2017.

Consumer Adoption of Future MyData-Based Preventive eHealth Services: An Acceptance Model and Survey Study

PubMed Central

Pekkarinen, Saara; Lappi, Minna; Väisänen, Jere; Juntunen, Jouni; Pikkarainen, Minna

2017-01-01

Background Constantly increasing health care costs have led countries and health care providers to the point where health care systems must be reinvented. Consequently, electronic health (eHealth) has recently received a great deal of attention in social sciences in the domain of Internet studies. However, only a fraction of these studies focuses on the acceptability of eHealth, making consumers’ subjective evaluation an understudied field. This study will address this gap by focusing on the acceptance of MyData-based preventive eHealth services from the consumer point of view. We are adopting the term "MyData", which according to a White Paper of the Finnish Ministry of Transport and Communication refers to "1) a new approach, a paradigm shift in personal data management and processing that seeks to transform the current organization centric system to a human centric system, 2) to personal data as a resource that the individual can access and control." Objective The aim of this study was to investigate what factors influence consumers’ intentions to use a MyData-based preventive eHealth service before use. Methods We applied a new adoption model combining Venkatesh’s unified theory of acceptance and use of technology 2 (UTAUT2) in a consumer context and three constructs from health behavior theories, namely threat appraisals, self-efficacy, and perceived barriers. To test the research model, we applied structural equation modeling (SEM) with Mplus software, version 7.4. A Web-based survey was administered. We collected 855 responses. Results We first applied traditional SEM for the research model, which was not statistically significant. We then tested for possible heterogeneity in the data by running a mixture analysis. We found that heterogeneity was not the cause for the poor performance of the research model. Thus, we moved on to model-generating SEM and ended up with a statistically significant empirical model (root mean square error of approximation [RMSEA] 0.051, Tucker-Lewis index [TLI] 0.906, comparative fit index [CFI] 0.915, and standardized root mean square residual 0.062). According to our empirical model, the statistically significant drivers for behavioral intention were effort expectancy (beta=.191, P<.001), self-efficacy (beta=.449, P<.001), threat appraisals (beta=.416, P<.001), and perceived barriers (beta=−.212, P=.009). Conclusions Our research highlighted the importance of health-related factors when it comes to eHealth technology adoption in the consumer context. Emphasis should especially be placed on efforts to increase consumers’ self-efficacy in eHealth technology use and in supporting healthy behavior. PMID:29273574

Consumer Expectations of Online Services in the Insurance Industry: An Exploratory Study of Drivers and Outcomes.

PubMed

Méndez-Aparicio, M Dolores; Izquierdo-Yusta, Alicia; Jiménez-Zarco, Ana I

2017-01-01

Today, the customer-brand relationship is fundamental to a company's bottom line, especially in the service sector and with services offered via online channels. In order to maximize its effects, organizations need (1) to know which factors influence the formation of an individual's service expectations in an online environment; and (2) to establish the influence of these expectations on customers' likelihood of recommending a service before they have even used it. In accordance with the TAM model (Davis, 1989; Davis et al., 1992), the TRA model (Fishbein and Ajzen, 1975), the extended UTAUT model (Venkatesh et al., 2012), and the approach described by Alloza (2011), this work proposes a theoretical model of the antecedents and consequences of consumer expectations of online services. In order to validate the proposed theoretical model, a sample of individual insurance company customers was analyzed. The results showed, first, the importance of customers' expectations with regard to the intention to recommend the "private area" of the company's website to other customers prior to using it themselves. They also revealed the importance to expectations of the antecedents perceived usefulness, ease of use, frequency of use, reputation, and subjective norm.

Consumer Expectations of Online Services in the Insurance Industry: An Exploratory Study of Drivers and Outcomes

PubMed Central

Méndez-Aparicio, M. Dolores; Izquierdo-Yusta, Alicia; Jiménez-Zarco, Ana I.

2017-01-01

Today, the customer-brand relationship is fundamental to a company’s bottom line, especially in the service sector and with services offered via online channels. In order to maximize its effects, organizations need (1) to know which factors influence the formation of an individual’s service expectations in an online environment; and (2) to establish the influence of these expectations on customers’ likelihood of recommending a service before they have even used it. In accordance with the TAM model (Davis, 1989; Davis et al., 1992), the TRA model (Fishbein and Ajzen, 1975), the extended UTAUT model (Venkatesh et al., 2012), and the approach described by Alloza (2011), this work proposes a theoretical model of the antecedents and consequences of consumer expectations of online services. In order to validate the proposed theoretical model, a sample of individual insurance company customers was analyzed. The results showed, first, the importance of customers’ expectations with regard to the intention to recommend the “private area” of the company’s website to other customers prior to using it themselves. They also revealed the importance to expectations of the antecedents perceived usefulness, ease of use, frequency of use, reputation, and subjective norm. PMID:28798705

Boosting Quality Registries with Clinical Decision Support Functionality*. User Acceptance of a Prototype Applied to HIV/TB Drug Therapy.

PubMed

Wannheden, Carolina; Hvitfeldt-Forsberg, Helena; Eftimovska, Elena; Westling, Katarina; Ellenius, Johan

2017-08-11

The care of HIV-related tuberculosis (HIV/TB) is complex and challenging. Clinical decision support (CDS) systems can contribute to improve quality of care, but more knowledge is needed on factors determining user acceptance of CDS. To analyze physicians' and nurses' acceptance of a CDS prototype for evidence-based drug therapy recommendations for HIV/TB treatment. Physicians and nurses were involved in designing a CDS prototype intended for future integration with the Swedish national HIV quality registry. Focus group evaluation was performed with ten nurses and four physicians, respectively. The Unified Theory of Acceptance and Use of Technology (UTAUT) was used to analyze acceptance. We identified several potential benefits with the CDS prototype as well as some concerns that could be addressed by redesign. There was also concern about dependence on physician attitudes, as well as technical, organizational, and legal issues. Acceptance evaluation at a prototype stage provided rich data to improve the future design of a CDS prototype. Apart from design and development efforts, substantial organizational efforts are needed to enable the implementation and maintenance of a future CDS system.

Drivers and Barriers to Acceptance of Web-Based Aftercare of Patients in Inpatient Routine Care: A Cross-Sectional Survey

PubMed Central

Hennemann, Severin; Beutel, Manfred E

2016-01-01

Background Web-based aftercare can help to stabilize treatment effects and support transition after inpatient treatment, yet uptake by patients seems limited in routine care and little is known about the mechanisms of adoption and implementation. Objective The aim of this study was to (1) determine acceptance of Web-based aftercare and (2) explore its drivers and barriers in different subgroups of a mixed inpatient sample. Method In a cross-sectional design, 38.3% (374/977) of the inpatients from a broad spectrum of diagnostic groups (psychosomatic, cardiologic, orthopedic, pediatric, and substance-related disorders) filled out a self-administered questionnaire prior to discharge. Drivers and barriers to patients’ acceptance of Web-based aftercare were examined based on an extension to the “unified theory of acceptance and use of technology” (UTAUT). In total, 16.7% (59/353) of the participants indicated prior use of eHealth interventions. Results Acceptance (min 1, max 5) was low (mean 2.56, SD 1.22) and differed between diagnostic groups (Welch F4,133.10 =7.77, P<.001), with highest acceptance in adolescent patients (mean 3.46, SD 1.42). Acceptance was significantly predicted by 3 UTAUT predictors: social influence (beta=.39, P<.001), performance expectancy (beta=.31, P<.001), and effort expectancy (beta=.22, P<.001). Furthermore, stress due to permanent availability (beta=−.09, P=.01) was negatively associated with acceptance. Conclusion This study demonstrated a limited acceptance of Web-based aftercare in inpatients. Expectations, social environment’s attitude, and negative experience with permanent availability influence eHealth acceptance. Improving implementation, therefore, means increasing eHealth experience and literacy and facilitating positive attitudes in patients and health professionals through education and reduction of misconceptions about effectiveness or usability. PMID:28011445

User acceptance of location-tracking technologies in health research: Implications for study design and data quality.

PubMed

Hardy, Jean; Veinot, Tiffany C; Yan, Xiang; Berrocal, Veronica J; Clarke, Philippa; Goodspeed, Robert; Gomez-Lopez, Iris N; Romero, Daniel; Vydiswaran, V G Vinod

2018-03-01

Research regarding place and health has undergone a revolution due to the availability of consumer-focused location-tracking devices that reveal fine-grained details of human mobility. Such research requires that participants accept such devices enough to use them in their daily lives. There is a need for a theoretically grounded understanding of acceptance of different location-tracking technology options, and its research implications. Guided by an extended Unified Theory of Acceptance and Use of Technology (UTAUT), we conducted a 28-day field study comparing 21 chronically ill people's acceptance of two leading, consumer-focused location-tracking technologies deployed for research purposes: (1) a location-enabled smartphone, and (2) a GPS watch/activity tracker. Participants used both, and completed two surveys and qualitative interviews. Findings revealed that all participants exerted effort to facilitate data capture, such as by incorporating devices into daily routines and developing workarounds to keep devices functioning. Nevertheless, the smartphone was perceived to be significantly easier and posed fewer usability challenges for participants than the watch. Older participants found the watch significantly more difficult to use. For both devices, effort expectancy was significantly associated with future willingness to participate in research although prosocial motivations overcame some concerns. Social influence, performance expectancy and use behavior were significantly associated with intentions to use the devices in participants' personal lives. Data gathered via the smartphone was significantly more complete than data gathered via the watch, primarily due to usability challenges. To make longer-term participation in location tracking research a reality, and to achieve complete data capture, researchers must minimize the effort involved in participation; this requires usable devices. For long-term location-tracking studies using similar devices, findings indicate that only smartphone-based tracking is up to the challenge. Copyright © 2018 Elsevier Inc. All rights reserved.

Barriers and challenges in adopting Saudi telemedicine network: The perceptions of decision makers of healthcare facilities in Saudi Arabia.

PubMed

Alaboudi, Abdulellah; Atkins, Anthony; Sharp, Bernadette; Balkhair, Ahmed; Alzahrani, Mohammed; Sunbul, Tamara

Despite emerging evidence about the benefits of telemedicine, there are still many barriers and challenges to its adoption. Its adoption is often cited as a failed project because 75% of them are abandoned or 'failed outright' and this percentage increases to 90% in developing countries. The literature has clarified that there is neither one-size-fit-all framework nor best-practice solution for all ICT innovations or for all countries. Barriers and challenges in adopting and implementing one ICT innovation in a given country/organisation may not be similar - not for the same ICT innovation in another country/organisation nor for another ICT innovation in the same country/organisation. To the best of our knowledge, no comprehensive scientific study has investigated these challenges and barriers in all Healthcare Facilities (HCFs) across the Kingdom of Saudi Arabia (KSA). This research, which is undertaken based on the Saudi Telemedicine Network roadmap and in collaboration with the Saudi Ministry of Health (MOH), is aimed at identifying the principle predictive challenges and barriers in the context of the KSA, and understanding the perspective of the decision makers of each HCF type, sector, and location. Three theories are used to underpin this research: the Unified Theory of Acceptance and Use of Technology (UTAUT), the Technology-Organisation-Environment (TOE) theoretical framework, and the Evaluating Telemedicine Systems Success Model (ETSSM). This study applies a three-sequential-phase approach by using three mixed methods (i.e., literature review, interviews, and questionnaires) in order to utilise the source triangulation and the data comparison analysis technique. The findings of this study show that the top three influential barriers to adopt and implement telemedicine by the HCF decision makers are: (i) the availability of adequate sustainable financial support to implement, operate, and maintain the telemedicine system, (ii) ensuring conformity of telemedicine services with core mission, vision, needs and constraints of the HCF, and (iii) the reimbursement for telemedicine services. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. All rights reserved.

Evaluation of Acceptance of Nursing Information System in a German and American Hospital.

PubMed

Vollmer, Anne-Maria; Prokosch, Hans-Ulrich; Evans, Scott; Kuttler, Kathryn

2016-01-01

Nursing Information Systems (NIS) are not well-adopted and accepted in Germany. The evaluation of a NIS deployment in a German University Hospital supports this assumption. A second side study in the US should point out the differences regarding the technical and organizational differences. We use a questionnaire including standardized instruments like the Unified Theory of Acceptance (UTAUT). Results indicated that nurses in Germany compared to in the US do not use nursing process documentation to the same extent. The main reasons behind the low usage in comparison with the US are deficits in ease-of-use, system performance and the high expenditure of time and paper work for charting nursing plans.

Multi-EMR Structured Data Entry Form: User-Acceptance Testing of a Prototype.

PubMed

Zavar, Abbas; Keshavjee, Karim

2017-01-01

Capturing standardized data from multiple EMRs at the point of care is highly desirable for a variety of uses, including quality improvement programs, multi-centered clinical trials and clinical decision support. In this paper, we describe the design, development and user acceptance testing of a prototype web-based form (the Form) that can integrate with multiple EMRs. We used the validated UTAUT questionnaire to assess the likelihood of uptake of the Form into clinical practice. The Form was found to be easy to use, elicits low anxiety, supports productivity and is perceived to have good support. Users would benefit from training and from better social signaling about the importance of using the Form in their practice. Making the Form more fun and interesting could help increase uptake.

Analyzing older users' home telehealth services acceptance behavior-applying an Extended UTAUT model.

PubMed

Cimperman, Miha; Makovec Brenčič, Maja; Trkman, Peter

2016-06-01

Although telehealth offers an improved approach to providing healthcare services, its adoption by end users remains slow. With an older population as the main target, these traditionally conservative users pose a big challenge to the successful implementation of innovative telehealth services. The objective of this study was to develop and empirically test a model for predicting the factors affecting older users' acceptance of Home Telehealth Services (HTS). A survey instrument was administered to 400 participants aged 50 years and above from both rural and urban environments in Slovenia. Structural equation modeling was applied to analyze the causal effect of seven hypothesized predicting factors. HTS were introduced as a bundle of functionalities, representing future services that currently do not exist. This enabled users' perceptions to be measured on the conceptual level, rather than attitudes to a specific technical solution. Six relevant predictors were confirmed in older users' HTS acceptance behavior, with Performance Expectancy (r=0.30), Effort Expectancy (r=0.49), Facilitating Conditions (r=0.12), and Perceived Security (r=0.16) having a direct impact on behavioral intention to use HTS. In addition, Computer Anxiety is positioned as an antecedent of Effort Expectancy with a strong negative influence (r=-0.61), and Doctor's Opinion influence showed a strong impact on Performance Expectancy (r=0.31). The results also indicate Social Influence as an irrelevant predictor of acceptance behavior. The model of six predictors yielded 77% of the total variance explained in the final measured Behavioral Intention to Use HTS by older adults. The level at which HTS are perceived as easy to use and manage is the leading acceptance predictor in older users' HTS acceptance. Together with Perceived Usefulness and Perceived Security, these three factors represent the key influence on older people's HTS acceptance behavior. When promoting HTS, interventions should focus to portray it as secure. Marketing interventions should focus also on promoting HTS among health professionals, using them as social agents to frame the services as useful and beneficial. The important role of computer anxiety may result in a need to use different equipment such as a tablet computer to access HTS. Finally, this paper introduces important methodological guidelines for measuring perceptions on a conceptual level of future services that currently do not exist. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Technological Diffusion within Educational Institutions: Applying the Technology Acceptance Model.

ERIC Educational Resources Information Center

Wolski, Stacy; Jackson, Sally

Expectancy models of behavior such as the Theory of Reasoned Action (TRA) and the Technology Acceptance Model (TAM) offer guidelines that aid efforts to facilitate use of new technology. These models remind us that both acceptance of and resistance to technology use are grounded in beliefs and norms regarding the technology. Although TAM is widely…

Technology transfer and Rockwell International

NASA Technical Reports Server (NTRS)

Gernand, Joseph

1992-01-01

Two technology partnership models are presented for consideration. The first model posits a government buyer of technology, and the second model posits that the customer is the consumer of the technology. These two models are concerned with methods of and impediments to technology transfer and information dissemination in government/contractor relationships.

Technology Transfer Issues and a New Technology Transfer Model

ERIC Educational Resources Information Center

Choi, Hee Jun

2009-01-01

The following are major issues that should be considered for efficient and effective technology transfer: conceptions of technology, technological activity and transfer, communication channels, factors affecting transfer, and models of transfer. In particular, a well-developed model of technology transfer could be used as a framework for…

OAST system technology planning

NASA Technical Reports Server (NTRS)

Sadin, S. R.

1978-01-01

The NASA Office of Aeronautics and Space Technology developed a planning model for space technology consisting of a space systems technology model, technology forecasts and technology surveys. The technology model describes candidate space missions through the year 2000 and identifies their technology requirements. The technology surveys and technology forecasts provide, respectively, data on the current status and estimates of the projected status of relevant technologies. These tools are used to further the understanding of the activities and resources required to ensure the timely development of technological capabilities. Technology forecasting in the areas of information systems, spacecraft systems, transportation systems, and power systems are discussed.

Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

NASA Technical Reports Server (NTRS)

Doyle, Monica; ONeil, Daniel A.; Christensen, Carissa B.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS) is a decision support tool designed to aid program managers and strategic planners in determining how to invest technology research and development dollars. It is an Excel-based modeling package that allows a user to build complex space architectures and evaluate the impact of various technology choices. ATLAS contains system models, cost and operations models, a campaign timeline and a centralized technology database. Technology data for all system models is drawn from a common database, the ATLAS Technology Tool Box (TTB). The TTB provides a comprehensive, architecture-independent technology database that is keyed to current and future timeframes.

Keeping learning central: a model for implementing emerging technologies

PubMed Central

Willcockson, Irmgard U.; Phelps, Cynthia L.

2010-01-01

Felt problem Technology integration continues to be a challenge for health science faculty. While students expect emerging technologies to be used in the classroom, faculty members desire a strategic process to incorporate technology for the students' benefit. Our solution We have developed a model that provides faculty a strategy for integrating emerging technologies into the classroom. The model is grounded in student learning and may be applied to any technology. We present the model alongside examples from faculty who have used it to incorporate technology into their health sciences classrooms. PMID:20165698

Keeping learning central: a model for implementing emerging technologies.

PubMed

Willcockson, Irmgard U; Phelps, Cynthia L

2010-01-15

FELT PROBLEM: Technology integration continues to be a challenge for health science faculty. While students expect emerging technologies to be used in the classroom, faculty members desire a strategic process to incorporate technology for the students' benefit. OUR SOLUTION: We have developed a model that provides faculty a strategy for integrating emerging technologies into the classroom. The model is grounded in student learning and may be applied to any technology. We present the model alongside examples from faculty who have used it to incorporate technology into their health sciences classrooms.

System Architecture Modeling for Technology Portfolio Management using ATLAS

NASA Technical Reports Server (NTRS)

Thompson, Robert W.; O'Neil, Daniel A.

2006-01-01

Strategic planners and technology portfolio managers have traditionally relied on consensus-based tools, such as Analytical Hierarchy Process (AHP) and Quality Function Deployment (QFD) in planning the funding of technology development. While useful to a certain extent, these tools are limited in the ability to fully quantify the impact of a technology choice on system mass, system reliability, project schedule, and lifecycle cost. The Advanced Technology Lifecycle Analysis System (ATLAS) aims to provide strategic planners a decision support tool for analyzing technology selections within a Space Exploration Architecture (SEA). Using ATLAS, strategic planners can select physics-based system models from a library, configure the systems with technologies and performance parameters, and plan the deployment of a SEA. Key parameters for current and future technologies have been collected from subject-matter experts and other documented sources in the Technology Tool Box (TTB). ATLAS can be used to compare the technical feasibility and economic viability of a set of technology choices for one SEA, and compare it against another set of technology choices or another SEA. System architecture modeling in ATLAS is a multi-step process. First, the modeler defines the system level requirements. Second, the modeler identifies technologies of interest whose impact on an SEA. Third, the system modeling team creates models of architecture elements (e.g. launch vehicles, in-space transfer vehicles, crew vehicles) if they are not already in the model library. Finally, the architecture modeler develops a script for the ATLAS tool to run, and the results for comparison are generated.

Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

2016-01-01

The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

Urban development applications project. Urban technology transfer study

NASA Technical Reports Server (NTRS)

1975-01-01

Technology transfer is defined along with reasons for attempting to transfer technology. Topics discussed include theoretical models, stages of the innovation model, communication process model, behavior of industrial organizations, problem identification, technology search and match, establishment of a market mechanism, applications engineering, commercialization, and management of technology transfer.

Advanced Methods for Incorporating Solar Energy Technologies into Electric Sector Capacity-Expansion Models: Literature Review and Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, P.; Eurek, K.; Margolis, R.

2014-07-01

Because solar power is a rapidly growing component of the electricity system, robust representations of solar technologies should be included in capacity-expansion models. This is a challenge because modeling the electricity system--and, in particular, modeling solar integration within that system--is a complex endeavor. This report highlights the major challenges of incorporating solar technologies into capacity-expansion models and shows examples of how specific models address those challenges. These challenges include modeling non-dispatchable technologies, determining which solar technologies to model, choosing a spatial resolution, incorporating a solar resource assessment, and accounting for solar generation variability and uncertainty.

Condition Based Maintenance Technology Impact Study: Assessment Methods, Study Design and Interim Results

DTIC Science & Technology

2014-07-01

Unified Theory of Acceptance and Use of Technology, Structuration Model of Technology, UNCLASSIFIED DSTO-TR-2992 UNCLASSIFIED 5 Adaptive...Structuration Theory , Model of Mutual Adaptation, Model of Technology Appropriation, Diffusion/Implementation Model, and Tri-core Model, among others [11...simulation gaming essay/scenario writing genius forecasting role play/acting backcasting swot brainstorming relevance tree/logic chart scenario workshop

Do I Have to Learn Something New? Mental Models and the Acceptance of Replacement Technologies

ERIC Educational Resources Information Center

Zhang, Wei; Xu, Peng

2011-01-01

Few studies in technology acceptance have explicitly addressed the acceptance of replacement technologies, technologies that replace legacy ones that have been in use. This article explores this issue through the theoretical lens of mental models. We contend that accepting replacement technologies entails both mental model maintenance and mental…

Identifying Ghanaian Pre-Service Teachers' Readiness for Computer Use: A Technology Acceptance Model Approach

ERIC Educational Resources Information Center

Gyamfi, Stephen Adu

2016-01-01

This study extends the technology acceptance model to identify factors that influence technology acceptance among pre-service teachers in Ghana. Data from 380 usable questionnaires were tested against the research model. Utilising the extended technology acceptance model (TAM) as a research framework, the study found that: pre-service teachers'…

Predicting nurses' use of healthcare technology using the technology acceptance model: an integrative review.

PubMed

Strudwick, Gillian

2015-05-01

The benefits of healthcare technologies can only be attained if nurses accept and intend to fully use them. One of the most common models utilized to understand user acceptance of technology is the Technology Acceptance Model. This model and modified versions of it have only recently been applied in the healthcare literature among nurse participants. An integrative literature review was conducted on this topic. Ovid/MEDLINE, PubMed, Google Scholar, and CINAHL were searched yielding a total of 982 references. Upon eliminating duplicates and applying the inclusion and exclusion criteria, the review included a total of four dissertations, three symposium proceedings, and 13 peer-reviewed journal articles. These documents were appraised and reviewed. The results show that a modified Technology Acceptance Model with added variables could provide a better explanation of nurses' acceptance of healthcare technology. These added variables to modified versions of the Technology Acceptance Model are discussed, and the studies' methodologies are critiqued. Limitations of the studies included in the integrative review are also examined.

Applying the Extended Technology Acceptance Model to the Use of Clickers in Student Learning: Some Evidence from Macroeconomics Classes

ERIC Educational Resources Information Center

Wu, Xiaoyu; Gao, Yuan

2011-01-01

This paper applies the extended technology acceptance model (exTAM) in information systems research to the use of clickers in student learning. The technology acceptance model (TAM) posits that perceived ease of use and perceived usefulness of technology influence users' attitudes toward using and intention to use technology. Research subsequent…

A formulation of multidimensional growth models for the assessment and forecast of technology attributes

NASA Astrophysics Data System (ADS)

Danner, Travis W.

Developing technology systems requires all manner of investment---engineering talent, prototypes, test facilities, and more. Even for simple design problems the investment can be substantial; for complex technology systems, the development costs can be staggering. The profitability of a corporation in a technology-driven industry is crucially dependent on maximizing the effectiveness of research and development investment. Decision-makers charged with allocation of this investment are forced to choose between the further evolution of existing technologies and the pursuit of revolutionary technologies. At risk on the one hand is excessive investment in an evolutionary technology which has only limited availability for further improvement. On the other hand, the pursuit of a revolutionary technology may mean abandoning momentum and the potential for substantial evolutionary improvement resulting from the years of accumulated knowledge. The informed answer to this question, evolutionary or revolutionary, requires knowledge of the expected rate of improvement and the potential a technology offers for further improvement. This research is dedicated to formulating the assessment and forecasting tools necessary to acquire this knowledge. The same physical laws and principles that enable the development and improvement of specific technologies also limit the ultimate capability of those technologies. Researchers have long used this concept as the foundation for modeling technological advancement through extrapolation by analogy to biological growth models. These models are employed to depict technology development as it asymptotically approaches limits established by the fundamental principles on which the technological approach is based. This has proven an effective and accurate approach to modeling and forecasting simple single-attribute technologies. With increased system complexity and the introduction of multiple system objectives, however, the usefulness of this modeling technique begins to diminish. With the introduction of multiple objectives, researchers often abandon technology growth models for scoring models and technology frontiers. While both approaches possess advantages over current growth models for the assessment of multi-objective technologies, each lacks a necessary dimension for comprehensive technology assessment. By collapsing multiple system metrics into a single, non-intuitive technology measure, scoring models provide a succinct framework for multi-objective technology assessment and forecasting. Yet, with no consideration of physical limits, scoring models provide no insight as to the feasibility of a particular combination of system capabilities. They only indicate that a given combination of system capabilities yields a particular score. Conversely, technology frontiers are constructed with the distinct objective of providing insight into the feasibility of system capability combinations. Yet again, upper limits to overall system performance are ignored. Furthermore, the data required to forecast subsequent technology frontiers is often inhibitive. In an attempt to reincorporate the fundamental nature of technology advancement as bound by physical principles, researchers have sought to normalize multi-objective systems whereby the variability of a single system objective is eliminated as a result of changes in the remaining objectives. This drastically limits the applicability of the resulting technology model because it is only applicable for a single setting of all other system attributes. Attempts to maintain the interaction between the growth curves of each technical objective of a complex system have thus far been limited to qualitative and subjective consideration. This research proposes the formulation of multidimensional growth models as an approach to simulating the advancement of multi-objective technologies towards their upper limits. Multidimensional growth models were formulated by noticing and exploiting the correlation between technology growth models and technology frontiers. Both are frontiers in actuality. The technology growth curve is a frontier between capability levels of a single attribute and time, while a technology frontier is a frontier between the capability levels of two or more attributes. Multidimensional growth models are formulated by exploiting the mathematical significance of this correlation. The result is a model that can capture both the interaction between multiple system attributes and their expected rates of improvement over time. The fundamental nature of technology development is maintained, and interdependent growth curves are generated for each system metric with minimal data requirements. Being founded on the basic nature of technology advancement, relative to physical limits, the availability for further improvement can be determined for a single metric relative to other system measures of merit. A by-product of this modeling approach is a single n-dimensional technology frontier linking all n system attributes with time. This provides an environment capable of forecasting future system capability in the form of advancing technology frontiers. The ability of a multidimensional growth model to capture the expected improvement of a specific technological approach is dependent on accurately identifying the physical limitations to each pertinent attribute. This research investigates two potential approaches to identifying those physical limits, a physics-based approach and a regression-based approach. The regression-based approach has found limited acceptance among forecasters, although it does show potential for estimating upper limits with a specified degree of uncertainty. Forecasters have long favored physics-based approaches for establishing the upper limit to unidimensional growth models. The task of accurately identifying upper limits has become increasingly difficult with the extension of growth models into multiple dimensions. A lone researcher may be able to identify the physical limitation to a single attribute of a simple system; however, as system complexity and the number of attributes increases, the attention of researchers from multiple fields of study is required. Thus, limit identification is itself an area of research and development requiring some level of investment. Whether estimated by physics or regression-based approaches, predicted limits will always have some degree of uncertainty. This research takes the approach of quantifying the impact of that uncertainty on model forecasts rather than heavily endorsing a single technique to limit identification. In addition to formulating the multidimensional growth model, this research provides a systematic procedure for applying that model to specific technology architectures. Researchers and decision-makers are able to investigate the potential for additional improvement within that technology architecture and to estimate the expected cost of each incremental improvement relative to the cost of past improvements. In this manner, multidimensional growth models provide the necessary information to set reasonable program goals for the further evolution of a particular technological approach or to establish the need for revolutionary approaches in light of the constraining limits of conventional approaches.

Examining the Intention to Use Technology among Pre-Service Teachers: An Integration of the Technology Acceptance Model and Theory of Planned Behavior

ERIC Educational Resources Information Center

Teo, Timothy

2012-01-01

This study examined pre-service teachers' self-reported intention to use technology. One hundred fifty-seven participants completed a survey questionnaire measuring their responses to six constructs from a research model that integrated the Technology Acceptance Model (TAM) and Theory of Planned Behavior (TPB). Structural equation modeling was…

77 FR 32952 - Applications for New Awards: Technology and Media Services for Individuals With Disabilities...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-04

... With Disabilities--Models Promoting Young Children's Use of Assistive Technology AGENCY: Office of... Information: Technology and Media Services for Individuals with Disabilities--Models Promoting Young Children... Services for Individuals with Disabilities-- Models Promoting Young Children's Use of Assistive Technology...

An Exploration of Principal Instructional Technology Leadership

ERIC Educational Resources Information Center

Townsend, LaTricia Walker

2013-01-01

Nationwide the demand for schools to incorporate technology into their educational programs is great. In response, North Carolina developed the IMPACT model in 2003 to provide a comprehensive model for technology integration in the state. The model is aligned to national educational technology standards for teachers, students, and principals.…

A Path Model of Factors Affecting Secondary School Students' Technological Literacy

ERIC Educational Resources Information Center

Avsec, Stanislav; Jamšek, Janez

2018-01-01

Technological literacy defines a competitive vision for technology education. Working together with competitive supremacy, technological literacy shapes the actions of technology educators. Rationalised by the dictates of industry, technological literacy was constructed as a product of the marketplace. There are many models that visualise…

A Framework for Seeking the Connections between Technology, Pedagogy, and Culture: A Study in the Maldives

ERIC Educational Resources Information Center

Adam, Aminath

2017-01-01

Educational technology researchers have often overlooked the effect of culture on teachers' use of digital technologies in their pedagogical practice. Several technology integration models, such as the Technology Adoption Model (TAM) and Technological, Pedagogical and Content Knowledge (TPACK), have also failed to explain the connections between…

The Second Prototype of the Development of a Technological Pedagogical Content Knowledge Based Instructional Design Model: An Implementation Study in a Technology Integration Course

ERIC Educational Resources Information Center

Lee, Chia-Jung; Kim, ChanMin

2014-01-01

This study presents a refined technological pedagogical content knowledge (also known as TPACK) based instructional design model, which was revised using findings from the implementation study of a prior model. The refined model was applied in a technology integration course with 38 preservice teachers. A case study approach was used in this…

Examining the Influence of Subjective Norm and Facilitating Conditions on the Intention to Use Technology among Pre-Service Teachers: A Structural Equation Modeling of an Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Teo, Timothy

2010-01-01

This study examined pre-service teachers' self-reported behavioral intentions to use technology. Three hundred and fourteen participants completed a survey questionnaire measuring their responses to six constructs from a research model that extends the technology acceptance model (TAM) by including facilitating conditions and subjective norm.…

Technological substitution: the potential of plastic as primary packaging material in the US brewing industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roeleveld, J.J.

1985-01-01

This dissertation develops a general model of technological substitution that could be of help to planners and decision makers in industry who are faced with the problems created by continual technological change. The model as presented differs from existing models in the theoretical literature because of its emphasis on analyzing current and potential technologies in an attempt to understand the underlying factors contributing to technological substitution. The general model and the cost model that is part of it belong to that step in the interactive planning cycle called the formulation of the mess. The methodology underlying the cost model ismore » a combination of life-cycle analysis (i.e., from raw materials in nature, through all intermediate products, to waste returned to the environment) and resoumetrics, which is an engineering approach to measuring all physical inputs required to produce a certain level of output. The models are illustrated with a specific field of interest: substitution of primary packaging technologies in the US brewing industry. The physical costs of packaging beer in different containers are compared. Strategic considerations for a brewery deciding to adopt plastic packaging technology are discussed. Attention is given to another potential fruitful application of the model in the field of technology transfer to developing countries.« less

Rapid Prototyping in Technology Education.

ERIC Educational Resources Information Center

Flowers, Jim; Moniz, Matt

2002-01-01

Describes how technology education majors are using a high-tech model builder, called a fused deposition modeling machine, to develop their models directly from computer-based designs without any machining. Gives examples of applications in technology education. (JOW)

Modeling of advanced technology vehicles

DOT National Transportation Integrated Search

2003-09-01

The characterization of some types of "advanced technology vehicles" may help to understand policies that are strongly either explicitly or implicitly technology-dependent. Recent models attempt to characterize such technologies in terms of fuel econ...

The technology acceptance model: predicting nurses' intention to use telemedicine technology (eICU).

PubMed

Kowitlawakul, Yanika

2011-07-01

The purposes of this study were to determine factors and predictors that influence nurses' intention to use the eICU technology, to examine the applicability of the Technology Acceptance Model in explaining nurses' intention to use the eICU technology in healthcare settings, and to provide psychometric evidence of the measurement scales used in the study. The study involved 117 participants from two healthcare systems. The Telemedicine Technology Acceptance Model was developed based on the original Technology Acceptance Model that was initially developed by Fred Davis in 1986. The eICU Acceptance Survey was used as an instrument for the study. Content validity was examined, and the reliability of the instrument was tested. The results show that perceived usefulness is the most influential factor that influences nurses' intention to use the eICU technology. The principal factors that influence perceived usefulness are perceived ease of use, support from physicians, and years working in the hospital. The model fit was reasonably adequate and able to explain 58% of the variance (R = 0.58) in intention to use the eICU technology with the nursing sample.

Application of the Human Activity Assistive Technology model for occupational therapy research.

PubMed

Giesbrecht, Ed

2013-08-01

Theoretical models provide a framework for describing practice and integrating evidence into systematic research. There are few models that relate specifically to the provision of assistive technology in occupational therapy practice. The Human Activity Assistive Technology model is an enduring example that has continued to develop by integrating a social model of disability, concepts from occupational therapy theory and principles of assistive technology adoption and abandonment. This study first describes the core concepts of the Human Activity Assistive Technology model and reviews its development over three successive published versions. A review of the research literature reflects application of the model to clinical practice, study design, outcome measure selection and interpretation of results, particularly among occupational therapists. An evaluative framework is used to critique the adequacy of the Human Activity Assistive Technology model for practice and research, exploring attributes of clarity, simplicity, generality, accessibility and importance. Finally, recommendations are proposed for continued development of the model and research applications. Most of the existing research literature employs the Human Activity Assistive Technology model for background and study design; there is emerging evidence to support the core concepts as predictive factors. Although the concepts are generally simple, clear and applicable to occupational therapy practice and research, evolving terminology and outcomes become more complex with the conflation of integrated theories. The development of the Human Activity Assistive Technology model offers enhanced access and application for occupational therapists, but poses challenges to clarity among concepts. Suggestions are made for further development and applications of the model. © 2013 Occupational Therapy Australia.

Teaching Strategies Mediated by Technologies in the EduLab Model: The Case of Mathematics and Natural Sciences

ERIC Educational Resources Information Center

Oliveira, Ana; Pombo, Lúcia

2017-01-01

The EduLab model is a "new" educational model that integrates technologies in educational contexts comprising full equipped classrooms with attractive and easy-to-use technological resources. This model tries to promote a dynamic and more effective teaching and learning process. For this purpose, the model provides teachers training and…

Why Business Modeling is Crucial in the Development of eHealth Technologies

PubMed Central

van Gemert-Pijnen, Julia EWC; Nijland, Nicol; Ossebaard, Hans C; Hendrix, Ron MG; Seydel, Erwin R

2011-01-01

The impact and uptake of information and communication technologies that support health care are rather low. Current frameworks for eHealth development suffer from a lack of fitting infrastructures, inability to find funding, complications with scalability, and uncertainties regarding effectiveness and sustainability. These issues can be addressed by defining a better implementation strategy early in the development of eHealth technologies. A business model, and thus business modeling, help to determine such an implementation strategy by involving all important stakeholders in a value-driven dialogue on what the technology should accomplish. This idea also seems promising to eHealth, as it can contribute to the whole development of eHealth technology. We therefore suggest that business modeling can be used as an effective approach to supporting holistic development of eHealth technologies. The contribution of business modeling is elaborated in this paper through a literature review that covers the latest business model research, concepts from the latest eHealth and persuasive technology research, evaluation and insights from our prior eHealth research, as well as the review conducted in the first paper of this series. Business modeling focuses on generating a collaborative effort of value cocreation in which all stakeholders reflect on the value needs of the others. The resulting business model acts as the basis for implementation. The development of eHealth technology should focus more on the context by emphasizing what this technology should contribute in practice to the needs of all involved stakeholders. Incorporating the idea of business modeling helps to cocreate and formulate a set of critical success factors that will influence the sustainability and effectiveness of eHealth technology. PMID:22204896

Why business modeling is crucial in the development of eHealth technologies.

PubMed

van Limburg, Maarten; van Gemert-Pijnen, Julia E W C; Nijland, Nicol; Ossebaard, Hans C; Hendrix, Ron M G; Seydel, Erwin R

2011-12-28

The impact and uptake of information and communication technologies that support health care are rather low. Current frameworks for eHealth development suffer from a lack of fitting infrastructures, inability to find funding, complications with scalability, and uncertainties regarding effectiveness and sustainability. These issues can be addressed by defining a better implementation strategy early in the development of eHealth technologies. A business model, and thus business modeling, help to determine such an implementation strategy by involving all important stakeholders in a value-driven dialogue on what the technology should accomplish. This idea also seems promising to eHealth, as it can contribute to the whole development of eHealth technology. We therefore suggest that business modeling can be used as an effective approach to supporting holistic development of eHealth technologies. The contribution of business modeling is elaborated in this paper through a literature review that covers the latest business model research, concepts from the latest eHealth and persuasive technology research, evaluation and insights from our prior eHealth research, as well as the review conducted in the first paper of this series. Business modeling focuses on generating a collaborative effort of value cocreation in which all stakeholders reflect on the value needs of the others. The resulting business model acts as the basis for implementation. The development of eHealth technology should focus more on the context by emphasizing what this technology should contribute in practice to the needs of all involved stakeholders. Incorporating the idea of business modeling helps to cocreate and formulate a set of critical success factors that will influence the sustainability and effectiveness of eHealth technology.

Predicting User Acceptance of Collaborative Technologies: An Extension of the Technology Acceptance Model for E-Learning

ERIC Educational Resources Information Center

Cheung, Ronnie; Vogel, Doug

2013-01-01

Collaborative technologies support group work in project-based environments. In this study, we enhance the technology acceptance model to explain the factors that influence the acceptance of Google Applications for collaborative learning. The enhanced model was empirically evaluated using survey data collected from 136 students enrolled in a…

Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

ERIC Educational Resources Information Center

Kirmizi, Özkan

2014-01-01

The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

Explaining Technology Integration in K-12 Classrooms: A Multilevel Path Analysis Model

ERIC Educational Resources Information Center

Liu, Feng; Ritzhaupt, Albert D.; Dawson, Kara; Barron, Ann E.

2017-01-01

The purpose of this research was to design and test a model of classroom technology integration in the context of K-12 schools. The proposed multilevel path analysis model includes teacher, contextual, and school related variables on a teacher's use of technology and confidence and comfort using technology as mediators of classroom technology…

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT LASER TOUCH AND TECHNOLOGIES, LLC LASER TOUCH MODEL LT-B512

EPA Science Inventory

The Environmental Technology Verification report discusses the technology and performance of Laser Touch model LT-B512 targeting device manufactured by Laser Touch and Technologies, LLC, for manual spray painting operations. The relative transfer efficiency (TE) improved an avera...

Mediated Effects of Technology Competencies and Experiences on Relations among Attitudes Towards Technology Use, Technology Ownership, and Self Efficacy about Technological Pedagogical Content Knowledge

NASA Astrophysics Data System (ADS)

Yerdelen-Damar, Sevda; Boz, Yezdan; Aydın-Günbatar, Sevgi

2017-08-01

This study examined the relations of preservice science teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences to their self-efficacy beliefs about technological pedagogical content knowledge (TPACK). The present study also investigated interrelations among preservice teachers' attitudes towards technology use, technology ownership, technology competencies, and experiences. The participants of study were 665 elementary preservice science teachers (467 females, 198 males) from 7 colleges in Turkey. The proposed model based on educational technology literature was tested using structural equation modeling. The model testing results revealed that preservice teachers' technology competencies and experiences mediated the relation of technology ownership to their TPACK self efficacy beliefs. The direct relation of their possession of technology to their TPACK self efficacy beliefs was insignificant while the indirect relation through their technology competencies and experiences was significant. The results also indicated there were significant direct effects of preservice teachers' attitudes towards technology use, technology competencies, and experiences on their TPACK self efficacy beliefs.

Examining Engineering & Technology Students' Acceptance of Network Virtualization Technology Using the Technology Acceptance Model

ERIC Educational Resources Information Center

Yousif, Wael K.

2010-01-01

This causal and correlational study was designed to extend the Technology Acceptance Model (TAM) and to test its applicability to Valencia Community College (VCC) Engineering and Technology students as the target user group when investigating the factors influencing their decision to adopt and to utilize VMware as the target technology. In…

Understanding the Influence of Perceived Usability and Technology Self-Efficacy on Teachers' Technology Acceptance

ERIC Educational Resources Information Center

Holden, Heather; Rada, Roy

2011-01-01

The Technology Acceptance Model (TAM) represents how users come to accept and use a given technology and can be applied to teachers' use of educational technologies. Here the model is extended to incorporate teachers' perceived usability and self-efficacy measures toward the technologies they are currently using. The authors administered a survey…

Organizational models of educational technology in U.S. and Canadian medical schools.

PubMed

Souza, Kevin H; Kamin, Carol; O'Sullivan, Patricia; Moses, Anna; Heestand, Diane

2008-07-01

To examine the organizational structure of educational technology units within U.S. and Canadian medical schools in order to (1) identify organization models that support educational technology, (2) describe key attributes of these models, and (3) discuss the strengths and challenges associated with these models. The authors distributed a survey to 88 schools that had previously provided information on their educational technology services and infrastructure. The authors developed the survey through a series of pilots and, then, from the data for each respondent school, created concept maps, which were used to identify organizational models. The authors conducted analyses to determine differences among models. The authors coded the comments about organizational models and identified themes. The authors received adequate data for analysis from 61 schools (69%). Four models for educational technology organizations emerged: (1) centralized units located in the school of medicine, (2) centralized units located at the health science center, (3) centralized units at the comprehensive university, and (4) no centralized unit (Dispersed Model). The majority (75%) of schools relied on some type of centralized organization. Whereas few organization attributes proved to be statistically significant, the centralized models have more resources devoted to educational technology and a closer alignment with the academic mission than the Dispersed Model. Medical schools primarily use central models. The authors recommend that schools structuring their educational technology resources consider exploration of a central model because of its focused use of resources to improve teaching and learning.

Quality Inspection and Analysis of Three-Dimensional Geographic Information Model Based on Oblique Photogrammetry

NASA Astrophysics Data System (ADS)

Dong, S.; Yan, Q.; Xu, Y.; Bai, J.

2018-04-01

In order to promote the construction of digital geo-spatial framework in China and accelerate the construction of informatization mapping system, three-dimensional geographic information model emerged. The three-dimensional geographic information model based on oblique photogrammetry technology has higher accuracy, shorter period and lower cost than traditional methods, and can more directly reflect the elevation, position and appearance of the features. At this stage, the technology of producing three-dimensional geographic information models based on oblique photogrammetry technology is rapidly developing. The market demand and model results have been emerged in a large amount, and the related quality inspection needs are also getting larger and larger. Through the study of relevant literature, it is found that there are a lot of researches on the basic principles and technical characteristics of this technology, and relatively few studies on quality inspection and analysis. On the basis of summarizing the basic principle and technical characteristics of oblique photogrammetry technology, this paper introduces the inspection contents and inspection methods of three-dimensional geographic information model based on oblique photogrammetry technology. Combined with the actual inspection work, this paper summarizes the quality problems of three-dimensional geographic information model based on oblique photogrammetry technology, analyzes the causes of the problems and puts forward the quality control measures. It provides technical guidance for the quality inspection of three-dimensional geographic information model data products based on oblique photogrammetry technology in China and provides technical support for the vigorous development of three-dimensional geographic information model based on oblique photogrammetry technology.

Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 4. Technology appendix. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-10-01

Volume IV of the ISTUM documentation gives information on the individual technology specifications, but relates closely with Chapter II of Volume I. The emphasis in that chapter is on providing an overview of where each technology fits into the general-model logic. Volume IV presents the actual cost structure and specification of every technology modeled in ISTUM. The first chapter presents a general overview of the ISTUM technology data base. It includes an explanation of the data base printouts and how the separate-cost building blocks are combined to derive an aggregate-technology cost. The remaining chapters are devoted to documenting the specific-technologymore » cost specifications. Technologies included are: conventional technologies (boiler and non-boiler conventional technologies); fossil-energy technologies (atmospheric fluidized bed combustion, low Btu coal and medium Btu coal gasification); cogeneration (steam, machine drive, and electrolytic service sectors); and solar and geothermal technologies (solar steam, solar space heat, and geothermal steam technologies), and conservation technologies.« less

75 FR 61820 - Model Specifications for Breath Alcohol Ignition Interlock Devices (BAIIDs)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... technology to alcohol-specific sensors (such as fuel cell technology based on electro-chemical oxidation of alcohol) or other emerging sensor technologies? Or, should NHTSA not specify the sensor technology and... require alcohol- specific technology in the Model Specifications, but that the particular sensor design...

[The Technology Acceptance Model and Its Application in a Telehealth Program for the Elderly With Chronic Illnesses].

PubMed

Chang, Chi-Ping

2015-06-01

Many technology developments hold the potential to improve the quality of life of people and make life easier and more comfortable. New technologies have been well accepted by most people. Information sharing in particular is a major catalyst of change in our current technology-based society. Technology has widely innovated life and drastically changed lifestyles. The Technology Acceptance Model (TAM), a model developed to address the rapid advances in computer technology, is used to explain and predict user acceptance of new information technology. In the past, businesses have used the TAM as an assessment tool to predict user acceptance when introducing new technology products. They have also used external factors in the model to influence user perceptions and beliefs and to ensure the successful spread of new technologies. Informatization plays a critical role in healthcare services. Due to the rapid aging of populations and upward trends in the incidence of chronic illness, requirements for long-term care have increased in both quality and quantity. Therefore, there has been an increased emphasis on integrating healthcare and information technology. However, most elderly are significantly less adept at technology use than the general population. Therefore, we reexamined the effect that the essential concepts in a TAM exerted on technology acceptance. In the present study, the technology acceptance experience with regard to telehealth of the elderly was used as an example to explain how the revised technology acceptance model (TAM 2) may be effectively applied to enhance the understanding of technology care among nurses. The results may serve as a reference for future research on healthcare-technology use in long-term care or in elderly populations.

Technology dependence and health-related quality of life: a model.

PubMed

Marden, Susan F

2005-04-01

This paper presents a new theoretical model to explain people's diverse responses to therapeutic health technology by characterizing the relationship between technology dependence and health-related quality of life (HRQL). Technology dependence has been defined as reliance on a variety of devices, drugs and procedures to alleviate or remedy acute or chronic health problems. Health professionals must ensure that these technologies result in positive outcomes for those who must rely on them, while minimizing the potential for unintended consequences. Little research exists to inform health professionals about how dependency on therapeutic technology may affect patient-reported outcomes such as HRQL. Organizing frameworks to focus such research are also limited. Generated from the synthesis of three theoretical frameworks and empirical research, the model proposes that attitudes towards technology dependence affect HRQL through a person's illness representations or commonsense beliefs about their illness. Symptom distress, illness history, age and gender also influence the technology dependence and HRQL relationship. Five concepts form the major components of the model: a) attitudes towards technology dependence, b) illness representation, c) symptom distress, d) HRQL and e) illness history. The model is proposed as a guide for clinical nursing research into the impact of a wide variety of therapeutic health care interventions on HRQL. Empirical validation of the model is needed to test its generality.

Modeling Air Traffic Management Technologies with a Queuing Network Model of the National Airspace System

NASA Technical Reports Server (NTRS)

Long, Dou; Lee, David; Johnson, Jesse; Gaier, Eric; Kostiuk, Peter

1999-01-01

This report describes an integrated model of air traffic management (ATM) tools under development in two National Aeronautics and Space Administration (NASA) programs -Terminal Area Productivity (TAP) and Advanced Air Transport Technologies (AATT). The model is made by adjusting parameters of LMINET, a queuing network model of the National Airspace System (NAS), which the Logistics Management Institute (LMI) developed for NASA. Operating LMINET with models of various combinations of TAP and AATT will give quantitative information about the effects of the tools on operations of the NAS. The costs of delays under different scenarios are calculated. An extension of Air Carrier Investment Model (ACIM) under ASAC developed by the Institute for NASA maps the technologies' impacts on NASA operations into cross-comparable benefits estimates for technologies and sets of technologies.

Stochastic Lotka-Volterra equations: A model of lagged diffusion of technology in an interconnected world

NASA Astrophysics Data System (ADS)

Chakrabarti, Anindya S.

2016-01-01

We present a model of technological evolution due to interaction between multiple countries and the resultant effects on the corresponding macro variables. The world consists of a set of economies where some countries are leaders and some are followers in the technology ladder. All of them potentially gain from technological breakthroughs. Applying Lotka-Volterra (LV) equations to model evolution of the technology frontier, we show that the way technology diffuses creates repercussions in the partner economies. This process captures the spill-over effects on major macro variables seen in the current highly globalized world due to trickle-down effects of technology.

Pedagogical Beliefs and Attitudes toward Information and Communication Technology: A Survey of Teachers of English as a Foreign Language in China

ERIC Educational Resources Information Center

Liu, Haixia; Lin, Chin-Hsi; Zhang, Dongbo

2017-01-01

Though pedagogical beliefs have been identified as critical factors in the success of technology integration, very few studies have included them in technology-adoption models. The present study revises the Technology Acceptance Model (TAM) by adding teachers' pedagogical beliefs, and tests the revised model among university-level…

Development of a Risk-Based Comparison Methodology of Carbon Capture Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engel, David W.; Dalton, Angela C.; Dale, Crystal

2014-06-01

Given the varying degrees of maturity among existing carbon capture (CC) technology alternatives, an understanding of the inherent technical and financial risk and uncertainty associated with these competing technologies is requisite to the success of carbon capture as a viable solution to the greenhouse gas emission challenge. The availability of tools and capabilities to conduct rigorous, risk–based technology comparisons is thus highly desirable for directing valuable resources toward the technology option(s) with a high return on investment, superior carbon capture performance, and minimum risk. To address this research need, we introduce a novel risk-based technology comparison method supported by anmore » integrated multi-domain risk model set to estimate risks related to technological maturity, technical performance, and profitability. Through a comparison between solid sorbent and liquid solvent systems, we illustrate the feasibility of estimating risk and quantifying uncertainty in a single domain (modular analytical capability) as well as across multiple risk dimensions (coupled analytical capability) for comparison. This method brings technological maturity and performance to bear on profitability projections, and carries risk and uncertainty modeling across domains via inter-model sharing of parameters, distributions, and input/output. The integration of the models facilitates multidimensional technology comparisons within a common probabilistic risk analysis framework. This approach and model set can equip potential technology adopters with the necessary computational capabilities to make risk-informed decisions about CC technology investment. The method and modeling effort can also be extended to other industries where robust tools and analytical capabilities are currently lacking for evaluating nascent technologies.« less

Faculty Integration of Technology in Teacher Preparation: Outcomes of a Development Model

ERIC Educational Resources Information Center

Judge, Sharon; O'Bannon, Blanche

2008-01-01

This article reports on a faculty development model that uses a variety of approaches and strategies to help faculty restructure their curricula and effectively model technology integration for their students. A multifaceted model, funded in part by the "Preparing Tomorrow's Teachers to Use Technology" (PT3) initiative, was implemented…

Agent Models for Self-Motivated Home-Assistant Bots

NASA Astrophysics Data System (ADS)

Merrick, Kathryn; Shafi, Kamran

2010-01-01

Modern society increasingly relies on technology to support everyday activities. In the past, this technology has focused on automation, using computer technology embedded in physical objects. More recently, there is an expectation that this technology will not just embed reactive automation, but also embed intelligent, proactive automation in the environment. That is, there is an emerging desire for novel technologies that can monitor, assist, inform or entertain when required, and not just when requested. This paper presents three self-motivated, home-assistant bot applications using different self-motivated agent models. Self-motivated agents use a computational model of motivation to generate goals proactively. Technologies based on self-motivated agents can thus respond autonomously and proactively to stimuli from their environment. Three prototypes of different self-motivated agent models, using different computational models of motivation, are described to demonstrate these concepts.

A Technological Teacher Education Program Planning Model.

ERIC Educational Resources Information Center

Hansen, Ronald E.

1993-01-01

A model for technology teacher education curriculum has three facets: (1) purpose (experiential learning, personal development, technological enlightenment, economic well-being); (2) content (professional knowledge, curriculum development competence, pedagogical knowledge and skill, technological foundations); and (3) process (planned reflection,…

Application of Interface Technology in Progressive Failure Analysis of Composite Panels

NASA Technical Reports Server (NTRS)

Sleight, D. W.; Lotts, C. G.

2002-01-01

A progressive failure analysis capability using interface technology is presented. The capability has been implemented in the COMET-AR finite element analysis code developed at the NASA Langley Research Center and is demonstrated on composite panels. The composite panels are analyzed for damage initiation and propagation from initial loading to final failure using a progressive failure analysis capability that includes both geometric and material nonlinearities. Progressive failure analyses are performed on conventional models and interface technology models of the composite panels. Analytical results and the computational effort of the analyses are compared for the conventional models and interface technology models. The analytical results predicted with the interface technology models are in good correlation with the analytical results using the conventional models, while significantly reducing the computational effort.

Exploring Healthcare Consumer Acceptance of Personal Health Information Management Technology through Personal Health Record Systems

ERIC Educational Resources Information Center

Wu, Huijuan

2013-01-01

Healthcare technologies are evolving from a practitioner-centric model to a patient-centric model due to the increasing need for technology that directly serves healthcare consumers, including healthy people and patients. Personal health information management (PHIM) technology is one of the technologies designed to enhance an individual's ability…

The Model Technology School: Toward Literacy through Technology. Technology.

ERIC Educational Resources Information Center

Schneider, Raymond J.

This paper describes one Florida school's experience with the Model Technology Schools (MTS) pilot program, and proposes a poetry curriculum for K-12 education that incorporates laserdisc technology for student presentations. Webster Elementary School in St. Augustine was the smallest of five schools chosen for the MTS program to demonstrate the…

Developing Technology Teachers: Questioning the Industrial Tool Use Model

ERIC Educational Resources Information Center

Hansen, John W.; Lovedahl, Gerald G.

2004-01-01

In this article, the author questions the role of technology teacher preparation programs that are based on an "industrial tool use" model to develop technology education teachers. It is the position of the authors that the manner by which technology education teachers are prepared may need revision and that technology teacher educators…

System-of-Systems Technology-Portfolio-Analysis Tool

NASA Technical Reports Server (NTRS)

O'Neil, Daniel; Mankins, John; Feingold, Harvey; Johnson, Wayne

2012-01-01

Advanced Technology Life-cycle Analysis System (ATLAS) is a system-of-systems technology-portfolio-analysis software tool. ATLAS affords capabilities to (1) compare estimates of the mass and cost of an engineering system based on competing technological concepts; (2) estimate life-cycle costs of an outer-space-exploration architecture for a specified technology portfolio; (3) collect data on state-of-the-art and forecasted technology performance, and on operations and programs; and (4) calculate an index of the relative programmatic value of a technology portfolio. ATLAS facilitates analysis by providing a library of analytical spreadsheet models for a variety of systems. A single analyst can assemble a representation of a system of systems from the models and build a technology portfolio. Each system model estimates mass, and life-cycle costs are estimated by a common set of cost models. Other components of ATLAS include graphical-user-interface (GUI) software, algorithms for calculating the aforementioned index, a technology database, a report generator, and a form generator for creating the GUI for the system models. At the time of this reporting, ATLAS is a prototype, embodied in Microsoft Excel and several thousand lines of Visual Basic for Applications that run on both Windows and Macintosh computers.

Modelling assistive technology adoption for people with dementia.

PubMed

Chaurasia, Priyanka; McClean, Sally I; Nugent, Chris D; Cleland, Ian; Zhang, Shuai; Donnelly, Mark P; Scotney, Bryan W; Sanders, Chelsea; Smith, Ken; Norton, Maria C; Tschanz, JoAnn

2016-10-01

Assistive technologies have been identified as a potential solution for the provision of elderly care. Such technologies have in general the capacity to enhance the quality of life and increase the level of independence among their users. Nevertheless, the acceptance of these technologies is crucial to their success. Generally speaking, the elderly are not well-disposed to technologies and have limited experience; these factors contribute towards limiting the widespread acceptance of technology. It is therefore important to evaluate the potential success of technologies prior to their deployment. The research described in this paper builds upon our previous work on modelling adoption of assistive technology, in the form of cognitive prosthetics such as reminder apps and aims at identifying a refined sub-set of features which offer improved accuracy in predicting technology adoption. Consequently, in this paper, an adoption model is built using a set of features extracted from a user's background to minimise the likelihood of non-adoption. The work is based on analysis of data from the Cache County Study on Memory and Aging (CCSMA) with 31 features covering a range of age, gender, education and details of health condition. In the process of modelling adoption, feature selection and feature reduction is carried out followed by identifying the best classification models. With the reduced set of labelled features the technology adoption model built achieved an average prediction accuracy of 92.48% when tested on 173 participants. We conclude that modelling user adoption from a range of parameters such as physical, environmental and social perspectives is beneficial in recommending a technology to a particular user based on their profile. Copyright © 2016 Elsevier Inc. All rights reserved.

Major psychological factors affecting acceptance of gene-recombination technology.

PubMed

Tanaka, Yutaka

2004-12-01

The purpose of this study was to verify the validity of a causal model that was made to predict the acceptance of gene-recombination technology. A structural equation model was used as a causal model. First of all, based on preceding studies, the factors of perceived risk, perceived benefit, and trust were set up as important psychological factors determining acceptance of gene-recombination technology in the structural equation model. An additional factor, "sense of bioethics," which I consider to be important for acceptance of biotechnology, was added to the model. Based on previous studies, trust was set up to have an indirect influence on the acceptance of gene-recombination technology through perceived risk and perceived benefit in the model. Participants were 231 undergraduate students in Japan who answered a questionnaire with a 5-point bipolar scale. The results indicated that the proposed model fits the data well, and showed that acceptance of gene-recombination technology is explained largely by four factors, that is, perceived risk, perceived benefit, trust, and sense of bioethics, whether the technology is applied to plants, animals, or human beings. However, the relative importance of the four factors was found to vary depending on whether the gene-recombination technology was applied to plants, animals, or human beings. Specifically, the factor of sense of bioethics is the most important factor in acceptance of plant gene-recombination technology and animal gene-recombination technology, and the factors of trust and perceived risk are the most important factors in acceptance of human being gene-recombination technology.

Cadastral data model established and perfected with 4S technology

NASA Astrophysics Data System (ADS)

He, Beijing; He, Jiang; He, Jianpeng

1998-08-01

Considering China's social essential system and the actual case of the formation of cadastral information in urban and rural area, and based on the 4S technology and the theory and method of canton's GPS geodetic data bench developed by the authors, we thoroughly research on some correlative technical problems about establishing and perfecting all-level's microcosmic cadastral data model (called model in the following) once again. Such problems as the following are included: cadastral, feature and topographic information and its modality and expressing method, classifying and grading the model, coordinate system to be selected, data basis for the model, the collecting method and digitalization of information, database's structural model, mathematical model and the establishing technology of 3 or more dimensional model, dynamic monitoring of and the development and application of the model. Then, the domestic and overseas application prospect is revealed. It also has the tendency to intrude markets cooperated with 'data bench' technology or RS image maps' all-analysis digital surveying and mapping technology.

The effects of a technology-enhanced inquiry instructional model on students' understanding of science in Thailand

NASA Astrophysics Data System (ADS)

Lertwanasiriwan, Chaiwuti

The study examined the effects of a technology-enhanced inquiry instructional model on students' understanding of science in Thailand. A mixed quantitative research design was selected for the research design. A pretest-posttest control-group design was implemented for the experimental research. A causal-comparative design using questionnaire and classroom observation was employed for the non-experimental research. Two sixth-grade classrooms at a medium-sized public school in Bangkok, Thailand were randomly selected for the study - one as the control group and the other as the experimental group. The 34 students in the control group only received the inquiry instructional model, while the 35 students in the experimental group received the technology-enhanced inquiry instructional model. Both groups of students had been taught by the same science teacher for 15 weeks (three periods per week). The results and findings from the study seemed to indicate that both the technology-enhanced inquiry instructional model and the inquiry instructional model significantly improve students' understanding of science. However, it might be claimed that students receiving the technology-enhanced inquiry instructional model gain more than students only receiving the inquiry instructional model. In addition, the technology-enhanced inquiry instructional model seemed to support the assessment during the 5E Model's evaluation stage. Most students appeared to have very good attitudes toward using it in the science classroom suggesting that the technology-enhanced inquiry instructional model motivates students to learn science.

Acquisition Modernization: Transitioning Technology Into Warfighter Capability

DTIC Science & Technology

2011-08-01

to test and evaluate the technology and integrate the new capability into operational weapon systems (Figure 4). This funding model creates stove...misalignment between missions, TRLs, and the RDT&E funding model is a major 11 contributor to the valley of death. Technologies become obsolete on... funding model of the acquisition system. Create an individual budget account to fund the development of promising technologies. The Acquisition

E-Learning and the iNtegrating Technology for InQuiry (NTeQ) Model Lesson Design

ERIC Educational Resources Information Center

Flake, Lee Hatch

2017-01-01

The author reflects on the history of technology in education and e-learning and introduces the iNtegrating Technology for inQuiry (NTeQ) model of lesson design authored by Morrison and Lowther (2005). The NTeQ model lesson design is a new pedagogy for academic instruction in response to the growth of the Internet and technological advancements in…

Economics of technological change - A joint model for the aircraft and airline industries

NASA Technical Reports Server (NTRS)

Kneafsey, J. T.; Taneja, N. K.

1981-01-01

The principal focus of this econometric model is on the process of technological change in the U.S. aircraft manufacturing and airline industries. The problem of predicting the rate of introduction of current technology aircraft into an airline's fleet during the period of research, development, and construction for new technology aircraft arises in planning aeronautical research investments. The approach in this model is a statistical one. It attempts to identify major factors that influence transport aircraft manufacturers and airlines, and to correlate them with the patterns of delivery of new aircraft to the domestic trunk carriers. The functional form of the model has been derived from several earlier econometric models on the economics of innovation, acquisition, and technological change.

Adding Innovation Diffusion Theory to the Technology Acceptance Model: Supporting Employees' Intentions to Use E-Learning Systems

ERIC Educational Resources Information Center

Lee, Yi-Hsuan; Hsieh, Yi-Chuan; Hsu, Chia-Ning

2011-01-01

This study intends to investigate factors affecting business employees' behavioral intentions to use the e-learning system. Combining the innovation diffusion theory (IDT) with the technology acceptance model (TAM), the present study proposes an extended technology acceptance model. The proposed model was tested with data collected from 552…

Clinical engineering and risk management in healthcare technological process using architecture framework.

PubMed

Signori, Marcos R; Garcia, Renato

2010-01-01

This paper presents a model that aids the Clinical Engineering to deal with Risk Management in the Healthcare Technological Process. The healthcare technological setting is complex and supported by three basics entities: infrastructure (IS), healthcare technology (HT), and human resource (HR). Was used an Enterprise Architecture - MODAF (Ministry of Defence Architecture Framework) - to model this process for risk management. Thus, was created a new model to contribute to the risk management in the HT process, through the Clinical Engineering viewpoint. This architecture model can support and improve the decision making process of the Clinical Engineering to the Risk Management in the Healthcare Technological process.

Technological aspects of lift-slab method in high-rise-building construction.

NASA Astrophysics Data System (ADS)

Gaidukov, Pavel V.; Pugach, Evgeny M.

2018-03-01

The utilization efficiency of slab lifting technology for high-rise-building construction is regarded in the present article. The main problem of the article is organizing technology abilities indication, which proves the method application possibility. There is the comparing of lifting technologies and sequential concrete-frame extension, as follows: the first one: the parameters are defined, and the second one: the organizational model is executed. This model defines borders of the usage methods, as well. There is the mathematic model creating, which describes boundary conditions of the present technologies usage. This model allows to predict construction efficiency for different stored-number buildings.

Models for Building Knowledge in a Technology-Rich Setting: Teacher Education

ERIC Educational Resources Information Center

MacKinnon, Gregory R.; Aylward, M. Lynn

2009-01-01

Technology offers promising opportunities for creating new types of classroom learning environments. This paper describes three technology models used by teacher education interns: electronic portfolios, negotiative concept mapping, cognote-supported electronic discussions. As implemented in the current study, these models invoke graduated…

A Comparative Analysis of Point-of-View Modeling for Industrial and Technology Education Courses

ERIC Educational Resources Information Center

Katsioloudis, Petros J.; Fantz, Todd D.; Jones, Millie

2013-01-01

Enrollment in technology education at the college level has been declining, so it is becoming essential for technology teacher educators to investigate ways to increase the enrollment in their programs. Technology teacher educators are exploring the extent to which distance-learning technologies such as video modeling can be used by industrial and…

Learning Generation: Fostering Innovation with Tomorrow's Teachers and Technology

ERIC Educational Resources Information Center

Aust, Ronald; Newberry, Brian; O'Brien, Joseph; Thomas, Jennifer

2005-01-01

We discuss the context, conception, implementation, and research used to refine and evaluate a systemic model for fostering technology integration in teacher education. The Learning Generation model identifies conditions where innovations for using technology emerge in small group dialogues. The model uses a multifaceted implementation with…

Testing a Technology Integration Education Model for Millennial Preservice Teachers: Exploring the Moderating Relationships of Goals, Feedback, Task Value, and Self-Regulation among Motivation and Technological, Pedagogical, and Content Knowledge Competencies

ERIC Educational Resources Information Center

Holland, Denise D.; Piper, Randy T.

2016-01-01

The technology integration education model is a 12 construct model that includes 8 primary constructs and 4 moderator constructs. By testing the relationships among two primary constructs (motivation and technological, pedagogical, and content knowledge competencies) and four moderator constructs (goals, feedback, task value, and self-regulation),…

Avionics Collaborative Engineering Technology Delivery Order 0035: Secure Knowledge Management (SKM) Technology Research Roadmap - Technology Trends for Collaborative Information and Knowledge Management Research

DTIC Science & Technology

2004-06-01

such as that represented in the know-how of the master craftsman), and cognitive (know why, perceptions, values, beliefs, and mental models).4... cognitive engineering, educational technology, industrial/organizational psychology, sociology, cultural anthropology, and computational...such as human-human interaction, interface design and evaluation methodology, cognitive models and user models, health and ergonomic studies, empirical

An approach to facilitate healthcare professionals' readiness to support technology use in everyday life for persons with dementia.

PubMed

Malinowsky, Camilla; Rosenberg, Lena; Nygård, Louise

2014-05-01

Everyday technologies (ETs) like microwave ovens and automatic telephone services as well as assistive technologies (ATs) are often used in the performance of everyday activities. As a consequence, the ability to manage technology is important. This pilot study aimed to clarify the applicability of a model for knowledge translation to support healthcare professionals, to support technology use among older adults with dementia and their significant others. An additional aim was to explore the process of translating the model into practice. The applicability of the model (comprising a one-day course, including introduction and provision of tools, followed by interviews during and after a period of practice) was clarified for 11 healthcare professionals using a constant comparative approach. The content of the model gave the participants an eye-opening experience of technology use among persons with dementia. They also described how they had incorporated the model as a new way of thinking which supported and inspired new investigations and collaborations with colleagues and significant others. This study provided an applicable model of how research knowledge about technology use can be translated into clinical practice and be used by healthcare professionals to support the use of technology for persons with dementia.

Patients’ Acceptance of Smartphone Health Technology for Chronic Disease Management: A Theoretical Model and Empirical Test

PubMed Central

Dou, Kaili; Yu, Ping; Liu, Fang; Guan, YingPing; Li, Zhenye; Ji, Yumeng; Du, Ningkai; Lu, Xudong; Duan, Huilong

2017-01-01

Background Chronic disease patients often face multiple challenges from difficult comorbidities. Smartphone health technology can be used to help them manage their conditions only if they accept and use the technology. Objective The aim of this study was to develop and test a theoretical model to predict and explain the factors influencing patients’ acceptance of smartphone health technology for chronic disease management. Methods Multiple theories and factors that may influence patients’ acceptance of smartphone health technology have been reviewed. A hybrid theoretical model was built based on the technology acceptance model, dual-factor model, health belief model, and the factors identified from interviews that might influence patients’ acceptance of smartphone health technology for chronic disease management. Data were collected from patient questionnaire surveys and computer log records about 157 hypertensive patients’ actual use of a smartphone health app. The partial least square method was used to test the theoretical model. Results The model accounted for .412 of the variance in patients’ intention to adopt the smartphone health technology. Intention to use accounted for .111 of the variance in actual use and had a significant weak relationship with the latter. Perceived ease of use was affected by patients’ smartphone usage experience, relationship with doctor, and self-efficacy. Although without a significant effect on intention to use, perceived ease of use had a significant positive influence on perceived usefulness. Relationship with doctor and perceived health threat had significant positive effects on perceived usefulness, countering the negative influence of resistance to change. Perceived usefulness, perceived health threat, and resistance to change significantly predicted patients’ intentions to use the technology. Age and gender had no significant influence on patients’ acceptance of smartphone technology. The study also confirmed the positive relationship between intention to use and actual use of smartphone health apps for chronic disease management. Conclusions This study developed a theoretical model to predict patients’ acceptance of smartphone health technology for chronic disease management. Although resistance to change is a significant barrier to technology acceptance, careful management of doctor-patient relationship, and raising patients’ awareness of the negative effect of chronic disease can negate the effect of resistance and encourage acceptance and use of smartphone health technology to support chronic disease management for patients in the community. PMID:29212629

From translational research to open technology innovation systems.

PubMed

Savory, Clive; Fortune, Joyce

2015-01-01

The purpose of this paper is to question whether the emphasis placed within translational research on a linear model of innovation provides the most effective model for managing health technology innovation. Several alternative perspectives are presented that have potential to enhance the existing model of translational research. A case study is presented of innovation of a clinical decision support system. The paper concludes from the case study that an extending the triple helix model of technology transfer, to one based on a quadruple helix, present a basis for improving the performance translational research. A case study approach is used to help understand development of an innovative technology within a teaching hospital. The case is then used to develop and refine a model of the health technology innovation system. The paper concludes from the case study that existing models of translational research could be refined further through the development of a quadruple helix model of heath technology innovation that encompasses greater emphasis on user-led and open innovation perspectives. The paper presents several implications for future research based on the need to enhance the model of health technology innovation used to guide policy and practice. The quadruple helix model of innovation that is proposed can potentially guide alterations to the existing model of translational research in the healthcare sector. Several suggestions are made for how innovation activity can be better supported at both a policy and operational level. This paper presents a synthesis of the innovation literature applied to a theoretically important case of open innovation in the UK National Health Service. It draws in perspectives from other industrial sectors and applies them specifically to the management and organisation of innovation activities around health technology and the services in which they are embedded.

Extending the Will, Skill, Tool Model of Technology Integration: Adding Pedagogy as a New Model Construct

ERIC Educational Resources Information Center

Knezek, Gerald; Christensen, Rhonda

2016-01-01

An expansion of the Will, Skill, Tool Model of Technology Integration to include teacher's pedagogical style is proposed by the authors as a means of advancing the predictive power of the model for level of classroom technology integration to beyond 90%. Suggested advantages to this expansion include more precise identification of areas to be…

Second NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

NASA Technical Reports Server (NTRS)

ONeil, D. A.; Mankins, J. C.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS), a spreadsheet analysis tool suite, applies parametric equations for sizing and lifecycle cost estimation. Performance, operation, and programmatic data used by the equations come from a Technology Tool Box (TTB) database. In this second TTB Technical Interchange Meeting (TIM), technologists, system model developers, and architecture analysts discussed methods for modeling technology decisions in spreadsheet models, identified specific technology parameters, and defined detailed development requirements. This Conference Publication captures the consensus of the discussions and provides narrative explanations of the tool suite, the database, and applications of ATLAS within NASA s changing environment.

A Model Technology Educator: Thomas A. Edison

ERIC Educational Resources Information Center

Pretzer, William S.; Rogers, George E.; Bush, Jeffery

2007-01-01

Reflecting back over a century ago to the small village of Menlo Park, New Jersey provides insight into a remarkable visionary and an exceptional role model for today's problem-solving and design-focused technology educator: Thomas A. Edison, inventor, innovator, and model technology educator. Since Edison could not simply apply existing knowledge…

Validating a Technology Enhanced Student-Centered Learning Model

ERIC Educational Resources Information Center

Kang, Myunghee; Hahn, Jungsun; Chung, Warren

2015-01-01

The Technology Enhanced Student Centered Learning (TESCL) Model in this study presents the core factors that ensure the quality of learning in a technology-supported environment. Although the model was conceptually constructed using a student-centered learning framework and drawing upon previous studies, it should be validated through real-world…

Hospital-based expert model for health technology procurement planning in hospitals.

PubMed

Miniati, R; Cecconi, G; Frosini, F; Dori, F; Regolini, J; Iadanza, E; Biffi Gentili, G

2014-01-01

Although in the last years technology innovation in healthcare brought big improvements in care level and patient quality of life, hospital complexity and management cost became higher. For this reason, necessity of planning for medical equipment procurement within hospitals is getting more and more important in order to sustainable provide appropriate technology for both routine activity and innovative procedures. In order to support hospital decision makers for technology procurement planning, an expert model was designed as reported in the following paper. It combines the most widely used approaches for technology evaluation by taking into consideration Health Technology Assessment (HTA) and Medical Equipment Replacement Model (MERM). The designing phases include a first definition of prioritization algorithms, then the weighting process through experts' interviews and a final step for the model validation that included both statistical testing and comparison with real decisions. In conclusion, the designed model was able to provide a semi-automated tool that through the use of multidisciplinary information is able to prioritize different requests of technology acquisition in hospitals. Validation outcomes improved the model accuracy and created different "user profiles" according to the specific needs of decision makers.

High Technology Service Value Maximization through an MCDM-Based Innovative e-Business Model

NASA Astrophysics Data System (ADS)

Huang, Chi-Yo; Tzeng, Gwo-Hshiung; Ho, Wen-Rong; Chuang, Hsiu-Tyan; Lue, Yeou-Feng

The emergence of the Internet has changed the high technology marketing channels thoroughly in the past decade while E-commerce has already become one of the most efficient channels which high technology firms may skip the intermediaries and reach end customers directly. However, defining appropriate e-business models for commercializing new high technology products or services through Internet are not that easy. To overcome the above mentioned problems, a novel analytic framework based on the concept of high technology customers’ competence set expansion by leveraging high technology service firms’ capabilities and resources as well as novel multiple criteria decision making (MCDM) techniques, will be proposed in order to define an appropriate e-business model. An empirical example study of a silicon intellectual property (SIP) commercialization e-business model based on MCDM techniques will be provided for verifying the effectiveness of this novel analytic framework. The analysis successful assisted a Taiwanese IC design service firm to define an e-business model for maximizing its customer’s SIP transactions. In the future, the novel MCDM framework can be applied successful to novel business model definitions in the high technology industry.

An alternative perspective on assistive technology: the Person-Environment-Tool (PET) model.

PubMed

Jarl, Gustav; Lundqvist, Lars-Olov

2018-04-20

The medical and social models of disability are based on a dichotomy that categorizes people as able-bodied or disabled. In contrast, the biopsychosocial model, which forms the basis for the International Classification of Functioning, Disability and Health (ICF), suggests a universalistic perspective on human functioning, encompassing all human beings. In this article we argue that the artificial separation of function-enhancing technology into assistive technology (AT) and mainstream technology might be one of the barriers to a universalistic view of human functioning. Thus, an alternative view of AT is needed. The aim of this article was to construct a conceptual model to demonstrate how all human activities and participation depend on factors related to the person, environment, and tools, emphasizing a universalistic perspective on human functioning. In the Person-Environment-Tool (PET) model, a person's activity and participation are described as a function of factors related to the person, environment, and tool, drawing on various ICF components. Importantly, the PET model makes no distinction between people of different ability levels, between environmental modifications intended for people of different ability levels, or between different function-enhancing technologies (AT and mainstream technology). A fictive patient case is used to illustrate how the universalistic view of the PET model lead to a different approach in rehabilitation. The PET model supports a universalistic view of technology use, environmental adaptations, and variations in human functioning.

Technology acceptance perception for promotion of sustainable consumption.

PubMed

Biswas, Aindrila; Roy, Mousumi

2018-03-01

Economic growth in the past decades has resulted in change in consumption pattern and emergence of tech-savvy generation with unprecedented increase in the usage of social network technology. In this paper, the technology acceptance value gap adapted from the technology acceptance model has been applied as a tool supporting social network technology usage and subsequent promotion of sustainable consumption. The data generated through the use of structured questionnaires have been analyzed using structural equation modeling. The validity of the model and path estimates signifies the robustness of Technology Acceptance value gap in adjudicating the efficiency of social network technology usage in augmentation of sustainable consumption and awareness. The results indicate that subjective norm gap, ease-of-operation gap, and quality of green information gap have the most adversarial impact on social network technology usage. Eventually social networking technology usage has been identified as a significant antecedent of sustainable consumption.

Modeling timelines for translational science in cancer; the impact of technological maturation

PubMed Central

McNamee, Laura M.; Ledley, Fred D.

2017-01-01

This work examines translational science in cancer based on theories of innovation that posit a relationship between the maturation of technologies and their capacity to generate successful products. We examined the growth of technologies associated with 138 anticancer drugs using an analytical model that identifies the point of initiation of exponential growth and the point at which growth slows as the technology becomes established. Approval of targeted and biological products corresponded with technological maturation, with first approval averaging 14 years after the established point and 44 years after initiation of associated technologies. The lag in cancer drug approvals after the increases in cancer funding and dramatic scientific advances of the 1970s thus reflects predictable timelines of technology maturation. Analytical models of technological maturation may be used for technological forecasting to guide more efficient translation of scientific discoveries into cures. PMID:28346525

Technology and Online Education: Models for Change

ERIC Educational Resources Information Center

Cook, Catherine W.; Sonnenberg, Christian

2014-01-01

This paper contends that technology changes advance online education. A number of mobile computing and transformative technologies will be examined and incorporated into a descriptive study. The object of the study will be to design innovative mobile awareness models seeking to understand technology changes for mobile devices and how they can be…

Factors Impacting Teachers' Adoption of Mobile Learning

ERIC Educational Resources Information Center

Mac Callum, Kathryn; Jeffrey, Lynn; Kinshuk

2014-01-01

As mobile technology has advanced, awareness is growing that these technologies may benefit teaching and learning. However, despite this interest, the factors that will determine the acceptance of mobile technology by lecturers have been limited. This study proposed and tested a new model that extends the technology acceptance model (TAM) with…

Technological Discontinuities and Dominant Designs: A Cyclical Model of Technological Change.

ERIC Educational Resources Information Center

Anderson, Philip; Tushman, Michael L.

1990-01-01

Based on longitudinal studies of the cement, glass, and minicomputer industries, this article proposes a technological change model in which a technological breakthrough, or discontinuity, initiates an era of intense technical variation and selection, culminating in a single dominant design and followed by a period of incremental technical…

Technology Education in Maine. Curriculum Guide.

ERIC Educational Resources Information Center

Maine State Dept. of Educational and Cultural Services, Augusta. Bureau of Vocational Education.

This curriculum guide presents basic definitions, models, and examples as a framework that individual technology education instructors or departments can use to construct their own units, courses, and curricula at any level. An overview describes the development of the model and the content of technology education. Section I explains technology.…

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

NASA Technical Reports Server (NTRS)

Allada, Rama Kumar; Lange, Kevin; Anderson, Molly

2011-01-01

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA) that were developed using the Aspen Custom Modeler and Aspen Plus process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Building Information Modeling (BIM) Primer. Report 1: Facility Life-Cycle Process and Technology Innovation

DTIC Science & Technology

2012-08-01

Building Information Modeling ( BIM ) Primer Report 1: Facility Life-cycle Process and Technology Innovation In fo...is unlimited. ERDC/ITL TR-12-2 August 2012 Building Information Modeling ( BIM ) Primer Report 1: Facility Life-cycle Process and Technology...and to enhance the quality of projects through the design, construction, and handover phases. Building Information Modeling ( BIM ) is a

Modelling of Remediation Technologies at the Performance Assessment Level

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parton, N.J.; Paksy, A.; Eden, L.

2008-07-01

This paper presents approaches to modelling three different remediation technologies that are designed to support site operators during their assessment of remediation options for the management of radioactively contaminated land on nuclear licensed sites in the UK. The three selected technologies were soil washing, permeable reactive barrier and in-situ stabilisation. The potential exists to represent electrokinetics in the future. These technologies were chosen because it was considered that enough information already existed for site operators to assess mature technologies such as soil dig and disposal and groundwater pump and treat. Using the software code GoldSim, the models have been designedmore » to allow site operators to make both a reasonable scoping level assessment of the viability of treatment and understand the cost-benefits of each technology. For soil washing, a standard soil leaching technique was simulated whereby the soil is separated into fines and oversize particles, and subsequently a chemical reagent is used to strip contamination off the soil. The cost benefit of this technology in terms of capital costs for the plant and materials, operational costs and waste disposal costs can also be assessed. The permeable reactive barrier (PRB) model can represent either a continuous wall or a funnel and gate system. The model simulates the transport of contaminants through the reactive material contained in the PRB. The outputs from the model include concentration of contaminants in the groundwater flow downstream of the PRB, mass of contaminants retained by the PRB, total mass and volume of waste and the various costs associated with the PRB remediation technology. The in-situ stabilisation (ISS) model has the capability to represent remediation by the addition of reagents that immobilise contaminated soil. The model simulates the release of contaminants from the treated soil over time. Performance is evaluated by comparison of the mass of contaminants retained and released to the area outside the treatment zone. Other outputs include amount of spoil generated (to be treated as waste) and the costs associated with the application of the ISS technology. These models are aimed to help users select a technology or technologies that are potentially suitable for a particular site. It is anticipated that they will prompt the user to undertake more detailed assessments to tailor the selected technology to their site specific circumstances and contaminated land conditions. (author)« less

Development of a Technology Transfer Score for Evaluating Research Proposals: Case Study of Demand Response Technologies in the Pacific Northwest

NASA Astrophysics Data System (ADS)

Estep, Judith

Investment in Research and Development (R&D) is necessary for innovation, allowing an organization to maintain a competitive edge. The U.S. Federal Government invests billions of dollars, primarily in basic research technologies to help fill the pipeline for other organizations to take the technology into commercialization. However, it is not about just investing in innovation, it is about converting that research into application. A cursory review of the research proposal evaluation criteria suggests that there is little to no emphasis placed on the transfer of research results. This effort is motivated by a need to move research into application. One segment that is facing technology challenges is the energy sector. Historically, the electric grid has been stable and predictable; therefore, there were no immediate drivers to innovate. However, an aging infrastructure, integration of renewable energy, and aggressive energy efficiency targets are motivating the need for research and to put promising results into application. Many technologies exist or are in development but the rate at which they are being adopted is slow. The goal of this research is to develop a decision model that can be used to identify the technology transfer potential of a research proposal. An organization can use the model to select the proposals whose research outcomes are more likely to move into application. The model begins to close the chasm between research and application--otherwise known as the "valley of death". A comprehensive literature review was conducted to understand when the idea of technology application or transfer should begin. Next, the attributes that are necessary for successful technology transfer were identified. The emphasis of successful technology transfer occurs when there is a productive relationship between the researchers and the technology recipient. A hierarchical decision model, along with desirability curves, was used to understand the complexities of the researcher and recipient relationship, specific to technology transfer. In this research, the evaluation criteria of several research organizations were assessed to understand the extent to which the success attributes that were identified in literature were considered when reviewing research proposals. While some of the organizations included a few of the success attributes, none of the organizations considered all of the attributes. In addition, none of the organizations quantified the value of the success attributes. The effectiveness of the model relies extensively on expert judgments to complete the model validation and quantification. Subject matter experts ranging from senior executives with extensive experience in technology transfer to principal research investigators from national labs, universities, utilities, and non-profit research organizations were used to ensure a comprehensive and cross-functional validation and quantification of the decision model. The quantified model was validated using a case study involving demand response (DR) technology proposals in the Pacific Northwest. The DR technologies were selected based on their potential to solve some of the region's most prevalent issues. In addition, several sensitivity scenarios were developed to test the model's response to extreme case scenarios, impact of perturbations in expert responses, and if it can be applied to other than demand response technologies. In other words, is the model technology agnostic? In addition, the flexibility of the model to be used as a tool for communicating which success attributes in a research proposal are deficient and need strengthening and how improvements would increase the overall technology transfer score were assessed. The low scoring success attributes in the case study proposals (e.g. project meetings, etc.) were clearly identified as the areas to be improved for increasing the technology transfer score. As a communication tool, the model could help a research organization identify areas they could bolster to improve their overall technology transfer score. Similarly, the technology recipient could use the results to identify areas that need to be reinforced, as the research is ongoing. The research objective is to develop a decision model resulting in a technology transfer score that can be used to assess the technology transfer potential of a research proposal. The technology transfer score can be used by an organization in the development of a research portfolio. An organization's growth, in a highly competitive global market, hinges on superior R&D performance and the ability to apply the results. The energy sector is no different. While there is sufficient research being done to address the issues facing the utility industry, the rate at which technologies are adopted is lagging. The technology transfer score has the potential to increase the success of crossing the chasm to successful application by helping an organization make informed and deliberate decisions about their research portfolio.

Methods of Technological Forecasting,

DTIC Science & Technology

1977-05-01

Trend Extrapolation Progress Curve Analogy Trend Correlation Substitution Analysis or Substitution Growth Curves Envelope Curve Advances in the State of...the Art Technological Mapping Contextual Mapping Matrix Input-Output Analysis Mathematical Models Simulation Models Dynamic Modelling. CHAPTER IV...Generation Interaction between Needs and Possibilities Map of the Technological Future — (‘ross- Impact Matri x Discovery Matrix Morphological Analysis

Technological Literacy Reconsidered: A Model for Enactment

ERIC Educational Resources Information Center

Ingerman, Ake; Collier-Reed, Brandon

2011-01-01

This paper presents a model to describe technological literacy as enacted by individuals in the course of shaping their lives and the world around them. The model has two interrelated facets--the "potential" for and "enactment" of technological literacy--where enactment and potential mutually constitute each other. This "potential" is made up of…

A Theoretical Model of Children's Storytelling Using Physically-Oriented Technologies (SPOT)

ERIC Educational Resources Information Center

Guha, Mona Leigh; Druin, Allison; Montemayor, Jaime; Chipman, Gene; Farber, Allison

2007-01-01

This paper develops a model of children's storytelling using Physically-Oriented Technology (SPOT). The SPOT model draws upon literature regarding current physical storytelling technologies and was developed using a grounded theory approach to qualitative research. This empirical work focused on the experiences of 18 children, ages 5-6, who worked…

Research on 3D virtual campus scene modeling based on 3ds Max and VRML

NASA Astrophysics Data System (ADS)

Kang, Chuanli; Zhou, Yanliu; Liang, Xianyue

2015-12-01

With the rapid development of modem technology, the digital information management and the virtual reality simulation technology has become a research hotspot. Virtual campus 3D model can not only express the real world objects of natural, real and vivid, and can expand the campus of the reality of time and space dimension, the combination of school environment and information. This paper mainly uses 3ds Max technology to create three-dimensional model of building and on campus buildings, special land etc. And then, the dynamic interactive function is realized by programming the object model in 3ds Max by VRML .This research focus on virtual campus scene modeling technology and VRML Scene Design, and the scene design process in a variety of real-time processing technology optimization strategy. This paper guarantees texture map image quality and improve the running speed of image texture mapping. According to the features and architecture of Guilin University of Technology, 3ds Max, AutoCAD and VRML were used to model the different objects of the virtual campus. Finally, the result of virtual campus scene is summarized.

Application of 3D Laser Scanning Technology in Complex Rock Foundation Design

NASA Astrophysics Data System (ADS)

Junjie, Ma; Dan, Lu; Zhilong, Liu

2017-12-01

Taking the complex landform of Tanxi Mountain Landscape Bridge as an example, the application of 3D laser scanning technology in the mapping of complex rock foundations is studied in this paper. A set of 3D laser scanning technologies are formed and several key engineering problems are solved. The first is 3D laser scanning technology of complex landforms. 3D laser scanning technology is used to obtain a complete 3D point cloud data model of the complex landform. The detailed and accurate results of the surveying and mapping decrease the measuring time and supplementary measuring times. The second is 3D collaborative modeling of the complex landform. A 3D model of the complex landform is established based on the 3D point cloud data model. The super-structural foundation model is introduced for 3D collaborative design. The optimal design plan is selected and the construction progress is accelerated. And the last is finite-element analysis technology of the complex landform foundation. A 3D model of the complex landform is introduced into ANSYS for building a finite element model to calculate anti-slide stability of the rock, and provides a basis for the landform foundation design and construction.

Application of BIM technology in green scientific research office building

NASA Astrophysics Data System (ADS)

Ni, Xin; Sun, Jianhua; Wang, Bo

2017-05-01

BIM technology as a kind of information technology, has been along with the advancement of building industrialization application in domestic building industry gradually. Based on reasonable construction BIM model, using BIM technology platform, through collaborative design tools can effectively improve the design efficiency and design quality. Vanda northwest engineering design and research institute co., LTD., the scientific research office building project in combination with the practical situation of engineering using BIM technology, formed in the BIM model combined with related information according to the energy energy model (BEM) and the application of BIM technology in construction management stage made exploration, and the direct experience and the achievements gained by the architectural design part made a summary.

Cost modeling to justify technology acquisitions.

PubMed

Vanden Brink, J; Gray, S

1997-06-01

In an era of diminishing resources, healthcare providers must justify new technology acquisitions. Cost modeling is one method of evaluating the financial impact a technology acquisition will have on a healthcare facility or integrated delivery system. This methodology requires careful data collection and a thorough analysis of both current costs and future cost savings resulting from the new technology. By using a cost modeling methodology, providers will be able to achieve competitive and economic advantages by analyzing both cost and value.

[Research and application of computer-aided technology in restoration of maxillary defect].

PubMed

Cheng, Xiaosheng; Liao, Wenhe; Hu, Qingang; Wang, Qian; Dai, Ning

2008-08-01

This paper presents a new method of designing restoration model of maxillectomy defect through Computer aided technology. Firstly, 3D maxillectomy triangle mesh model is constructed from Helical CT data. Secondly, the triangle mesh model is transformed into initial computer-aided design (CAD) model of maxillectomy through reverse engineering software. Thirdly, the 3D virtual restoration model of maxillary defect is obtained after designing and adjusting the initial CAD model through CAD software according to the patient's practical condition. Therefore, the 3D virtual restoration can be fitted very well with the broken part of maxilla. The exported design data can be manufactured using rapid prototyping technology and foundry technology. Finally, the result proved that this method is effective and feasible.

OAST planning model for space systems technology

NASA Technical Reports Server (NTRS)

Sadin, S. R.

1978-01-01

The NASA Office of Aeronautics and Space Technology (OAST) planning model for space systems technology is described, and some space technology forecasts of a general nature are reported. Technology forecasts are presented as a span of technology levels; uncertainties in level of commitment to project and in required time are taken into account, with emphasis on differences resulting from high or low commitment. Forecasts are created by combining several types of data, including information on past technology trends, the trends of past predictions, the rate of advancement predicted by experts in the field, and technology forecasts already published.

Seeing the System: Dynamics and Complexity of Technology Integration in Secondary Schools

ERIC Educational Resources Information Center

Howard, Sarah K.; Thompson, Kate

2016-01-01

This paper introduces system dynamics modeling to understand, visualize and explore technology integration in schools, through the development of a theoretical model of technology-related change in teachers' practice. Technology integration is a dynamic social practice, within the social system of education. It is difficult, if not nearly…

A Model for Integrating New Technologies into Pre-Service Teacher Training Programs Ajman University (A Case Study)

ERIC Educational Resources Information Center

Shaqour, Ali Zuhdi H.

2005-01-01

This study introduces a "Technology Integration Model" for a learning environment utilizing constructivist learning principles and integrating new technologies namely computers and the Internet into pre-service teacher training programs. The technology integrated programs and learning environments may assist learners to gain experiences…

The Technology Adoption Process Model and Self-Efficacy of Distance Education Students

ERIC Educational Resources Information Center

Olson, Joel D.; Appunn, Frank D.

2017-01-01

The technology adoption process model (TAPM) is applied to a new synchronous conference technology with 27 asynchronous courses involving 520 participants and 17 instructors. The TAPM resulted from a qualitative study reviewing webcam conference technology adoption. The TAPM is now tested using self-efficacy as the dependent variable. The…

New Approaches and Trends in the Philosophy of Educational Technology for Learning and Teaching Environments

ERIC Educational Resources Information Center

Ipek, Ismail; Ziatdinov, Rushan

2017-01-01

The purpose of this study is to discuss instructional design and technology (IDT) model strategies for developing learning and teaching environments, based on philosophical approaches to educational technology theory. The study begins with a discussion of IDT models to define the history of educational technology or instructional technology…

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

NASA Technical Reports Server (NTRS)

Allada, Rama Kumar; Lange, Kevin E.; Anderson, Molly S.

2012-01-01

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA). These dynamic models were developed using the Aspen Custom Modeler (Registered TradeMark) and Aspen Plus(Registered TradeMark) process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

A Qualitative Case Study to Investigate the Technology Acceptance Experience Outlined in the TAM Using the Kubler-Ross Stages of Grieving and Acceptance

ERIC Educational Resources Information Center

Sotelo, Benjamin Eladio

2015-01-01

The Technology Acceptance Model (TAM) has been an important model for the understanding of end user acceptance regarding technology and a framework used in thousands of researched scenarios since publication in 1986. Similarly, the Kubler-Ross model of death and dying has also been used as a model for the study of acceptance within the medical…

Potential for Integrating Diffusion of Innovation Principles into Life Cycle Assessment of Emerging Technologies.

PubMed

Sharp, Benjamin E; Miller, Shelie A

2016-03-15

Life cycle assessment (LCA) measures cradle-to-grave environmental impacts of a product. To assess impacts of an emerging technology, LCA should be coupled with additional methods that estimate how that technology might be deployed. The extent and manner that an emerging technology diffuses throughout a region shapes the magnitude and type of environmental impacts. Diffusion of innovation is an established field of research that analyzes the adoption of new innovations, and its principles can be used to construct scenario models that enhance LCA of emerging technologies. Integrating diffusion modeling techniques with an LCA of emerging technology can provide estimates for the extent of market penetration, the displacement of existing systems, and the rate of adoption. Two general perspectives of application are macro-level diffusion models that use a function of time to represent adoption, and microlevel diffusion models that simulate adoption through interactions of individuals. Incorporating diffusion of innovation concepts complement existing methods within LCA to inform proactive environmental management of emerging technologies.

The CICT Earth Science Systems Analysis Model

NASA Technical Reports Server (NTRS)

Pell, Barney; Coughlan, Joe; Biegel, Bryan; Stevens, Ken; Hansson, Othar; Hayes, Jordan

2004-01-01

Contents include the following: Computing Information and Communications Technology (CICT) Systems Analysis. Our modeling approach: a 3-part schematic investment model of technology change, impact assessment and prioritization. A whirlwind tour of our model. Lessons learned.

Patients' Acceptance of Smartphone Health Technology for Chronic Disease Management: A Theoretical Model and Empirical Test.

PubMed

Dou, Kaili; Yu, Ping; Deng, Ning; Liu, Fang; Guan, YingPing; Li, Zhenye; Ji, Yumeng; Du, Ningkai; Lu, Xudong; Duan, Huilong

2017-12-06

Chronic disease patients often face multiple challenges from difficult comorbidities. Smartphone health technology can be used to help them manage their conditions only if they accept and use the technology. The aim of this study was to develop and test a theoretical model to predict and explain the factors influencing patients' acceptance of smartphone health technology for chronic disease management. Multiple theories and factors that may influence patients' acceptance of smartphone health technology have been reviewed. A hybrid theoretical model was built based on the technology acceptance model, dual-factor model, health belief model, and the factors identified from interviews that might influence patients' acceptance of smartphone health technology for chronic disease management. Data were collected from patient questionnaire surveys and computer log records about 157 hypertensive patients' actual use of a smartphone health app. The partial least square method was used to test the theoretical model. The model accounted for .412 of the variance in patients' intention to adopt the smartphone health technology. Intention to use accounted for .111 of the variance in actual use and had a significant weak relationship with the latter. Perceived ease of use was affected by patients' smartphone usage experience, relationship with doctor, and self-efficacy. Although without a significant effect on intention to use, perceived ease of use had a significant positive influence on perceived usefulness. Relationship with doctor and perceived health threat had significant positive effects on perceived usefulness, countering the negative influence of resistance to change. Perceived usefulness, perceived health threat, and resistance to change significantly predicted patients' intentions to use the technology. Age and gender had no significant influence on patients' acceptance of smartphone technology. The study also confirmed the positive relationship between intention to use and actual use of smartphone health apps for chronic disease management. This study developed a theoretical model to predict patients' acceptance of smartphone health technology for chronic disease management. Although resistance to change is a significant barrier to technology acceptance, careful management of doctor-patient relationship, and raising patients' awareness of the negative effect of chronic disease can negate the effect of resistance and encourage acceptance and use of smartphone health technology to support chronic disease management for patients in the community. ©Kaili Dou, Ping Yu, Ning Deng, Fang Liu, YingPing Guan, Zhenye Li, Yumeng Ji, Ningkai Du, Xudong Lu, Huilong Duan. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 06.12.2017.

Development of a tripolar model of technology acceptance: Hospital-based physicians' perspective on EHR.

PubMed

Beglaryan, Mher; Petrosyan, Varduhi; Bunker, Edward

2017-06-01

In health care, information technologies (IT) hold a promise to harness an ever-increasing flow of health related information and bring significant benefits including improved quality of care, efficiency, and cost containment. One of the main tools for collecting and utilizing health data is the Electronic Health Record (EHR). EHRs implementation can face numerous barriers to acceptance including attitudes and perceptions of potential users, required effort attributed to their implementation and usage, and resistance to change. Various theories explicate different aspects of technology deployment, implementation, and acceptance. One of the common theories is the Technology Acceptance Model (TAM), which helps to study the implementation of different healthcare IT applications. The objectives of this study are: to understand the barriers of EHR implementation from the perspective of physicians; to identify major determinants of physicians' acceptance of technology; and develop a model that explains better how EHRs (and technologies in general) are accepted by physicians. The proposed model derives from a cross-sectional survey of physicians selected through multi-stage cluster sampling from the hospitals of Yerevan, Armenia. The study team designed the survey instrument based on a literature review on barriers of EHR implementation. The analysis employed exploratory structural equation modeling (ESEM) with a robust weighted least squares (WLSMV) estimator for categorical indicators. The analysis progressed in two steps: appraisal of the measurement model and testing of the structural model. The derived model identifies the following factors as direct determinants of behavioral intention to use a novel technology: projected collective usefulness; personal innovativeness; patient influence; and resistance to change. Other factors (e.g., organizational change, professional relationships, administrative monitoring, organizational support and computer anxiety) exert their effects through projected collective usefulness, perceived usefulness, and perceived ease of use. The model reconciles individual-oriented and environment-oriented theoretical approaches and proposes a Tripolar Model of Technology Acceptance (TMTA), bringing together three key pillars of the healthcare: patients, practitioners, and provider organizations. The proposed TMTA explains 85% of variance of behavioral intention to use technology. The current study draws from the barriers of EHR implementation and identifies major determinants of technology acceptance among physicians. The study proposes TMTA as affording stronger explanative and predictive abilities for the health care system. TMTA paves a long overlooked gap in TAM and its descendants, which, in organizational settings, might distort construal of technology acceptance. It also explicates with greater depth the interdependence of different participants of the healthcare and complex interactions between healthcare and technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

U.S. energy sector impacts of technology innovation, fuel price, and electric sector CO 2 policy: Results from the EMF 32 model intercomparison study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hodson, Elke L.; Brown, Maxwell; Cohen, Stuart

We study the impact of achieving technology innovation goals, representing significant technology cost reductions and performance improvements, in both the electric power and end-use sectors by comparing outputs from four energy-economic models through the year 2050. We harmonize model input assumptions and then compare results in scenarios that vary natural gas prices, technology cost and performance metrics, and the implementation of a representative national electricity sector carbon dioxide (CO 2) policy. Achieving the representative technology innovation goals decreases CO 2 emissions in all models, regardless of natural gas price, due to increased energy efficiency and low-carbon generation becoming more costmore » competitive. For the models that include domestic natural gas markets, achieving the technology innovation goals lowers wholesale electricity prices, but this effect diminishes as projected natural gas prices increase. Higher natural gas prices lead to higher wholesale electricity prices but fewer coal capacity retirements. Some of the models include energy efficiency improvements as part of achieving the high-technology goals. Absent these energy efficiency improvements, low-cost electricity facilitates greater electricity consumption. The effect of implementing a representative electricity sector CO 2 policy differs considerably depending on the cost and performance of generating and end-use technologies. The CO 2 policy influences electric sector evolution in the cases with reference technology assumptions but has little to no influence in the cases that achieve the technology innovation goals. This outcome implies that meeting the representative technology innovation goals achieves a generation mix with similar CO 2 emissions to the representative CO 2 policy but with smaller increases to wholesale electricity prices. Finally, higher natural gas prices, achieving the representative technology innovation goals, and the combination of the two, increases the amount of renewable generation that is cost-effective to build and operate while slowing the growth of natural-gas fired generation, which is the predominant generation type in 2050 under reference conditions.« less

Solar Advisor Model User Guide for Version 2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilman, P.; Blair, N.; Mehos, M.

2008-08-01

The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

Modelling the Intention to Use Technology for Teaching Mathematics among Pre-Service Teachers in Serbia

ERIC Educational Resources Information Center

Teo, Timothy; Milutinovic, Verica

2015-01-01

This study aims to examine the variables that influence Serbian pre-service teachers' intention to use technology to teach mathematics. Using the technology acceptance model (TAM) as the framework, we developed a research model to include subjective norm, knowledge of mathematics, and facilitating conditions as external variables to the TAM. In…

Toward an agent-based patient-physician model for the adoption of continuous glucose monitoring technology.

PubMed

Verella, J Tipan; Patek, Stephen D

2009-03-01

Health care is a major component of the U.S. economy, and tremendous research and development efforts are directed toward new technologies in this arena. Unfortunately few tools exist for predicting outcomes associated with new medical products, including whether new technologies will find widespread use within the target population. Questions of technology adoption are rife within the diabetes technology community, and we particularly consider the long-term prognosis for continuous glucose monitoring (CGM) technology. We present an approach to the design and analysis of an agent model that describes the process of CGM adoption among patients with type 1 diabetes mellitus (T1DM), their physicians, and related stakeholders. We particularly focus on patient-physician interactions, with patients discovering CGM technology through word-of-mouth communication and through advertising, applying pressure to their physicians in the context of CGM device adoption, and physicians, concerned about liability, looking to peers for a general level of acceptance of the technology before recommending CGM to their patients. Repeated simulation trials of the agent-based model show that the adoption process reflects the heterogeneity of the adopting community. We also find that the effect of the interaction between patients and physicians is agents. Each physician, say colored by the nature of the environment as defined by the model parameters. We find that, by being able to represent the diverse perspectives of different types of stakeholders, agent-based models can offer useful insights into the adoption process. Models of this sort may eventually prove to be useful in helping physicians, other health care providers, patient advocacy groups, third party payers, and device manufacturers understand the impact of their decisions about new technologies. (c) 2009 Diabetes Technology Society.

Diffusion models for innovation: s-curves, networks, power laws, catastrophes, and entropy.

PubMed

Jacobsen, Joseph J; Guastello, Stephen J

2011-04-01

This article considers models for the diffusion of innovation would be most relevant to the dynamics of early 21st century technologies. The article presents an overview of diffusion models and examines the adoption S-curve, network theories, difference models, influence models, geographical models, a cusp catastrophe model, and self-organizing dynamics that emanate from principles of network configuration and principles of heat diffusion. The diffusion dynamics that are relevant to information technologies and energy-efficient technologies are compared. Finally, principles of nonlinear dynamics for innovation diffusion that could be used to rehabilitate the global economic situation are discussed.

Endogenous technological and demographic change under increasing water scarcity

NASA Astrophysics Data System (ADS)

Pande, S.; Ertsen, M.; Sivapalan, M.

2013-12-01

Many ancient civilizations such as the Indus Valley civilization dispersed under extreme dry conditions. Even contemporary societies such as the one in Murrumbidgee river basin, Australia, have started to witness a decline in overall population under increasing water scarcity. Skeptics of hydroclimatic determinism have often cautioned against the use of hydroclimatic change as the sole predictor of the fate of contemporary societies in water scarce regions by suggesting that technological change may ameliorate the effects of increasing water scarcity. We here develop a simple overlapping generations model of endogenous technological and demographic change. It models technological change not as an exogenous random sequence of events but as an endogenous process (as is widely accepted in contemporary literature) that depends on factors such as the investments that are (endogenously) made in a society, the endogenous diversification of a society into skilled and unskilled workers, individuals' patience in terms of its present consumption versus future consumption, the production technology and the (endogenous) interaction of these factors. The population growth rate is modeled to decline once consumption per capita crosses a ';survival' threshold. The model demonstrates that technological change may ameliorate the effects of increasing water scarcity but only to a certain extent in many cases. It is possible that technological change may allow a society to escape the effect of increasing water society, leading to an exponential rise in technology and population. However, such cases require that the rate of success of investment in technological advancement is high. In other more realistic cases of technological success, we find that endogenous technology change has an effect delaying the peak of population before it starts to decline. While the model is a rather simple model of societal growth, it is capable of replicating (not to scale) patterns of technological change (proxies of which in ancient technology include irrigation canals, metal tools, and the use of horses for labor while in contemporary societies its proxies may be the advent of drip irrigation, increasing reservoir storage capacity etc) and population change. It is capable of replicating the pattern of declining consumption per capita in presence of growth in aggregate production. It is also capable of modeling the exponential population rise even under increasing water scarcity. The results of the model suggest, as one of the many other possible explanations, that ancient societies that declined in the face of extreme water scarcity may have done so due to slower rate of success of investment in technological advancement. The model suggests that the population decline occurs after a prolonged decline in consumption per capita, which in turn is due to the joint effect of initially increasing population and increasing water scarcity. This is despite technological advancement and increase in aggregate production. Thus declining consumption per capita despite technological advancement and increase in aggregate production may serve as a useful predictor of upcoming decline in contemporary societies in water scarce basins.

[Decision modeling for economic evaluation of health technologies].

PubMed

de Soárez, Patrícia Coelho; Soares, Marta Oliveira; Novaes, Hillegonda Maria Dutilh

2014-10-01

Most economic evaluations that participate in decision-making processes for incorporation and financing of technologies of health systems use decision models to assess the costs and benefits of the compared strategies. Despite the large number of economic evaluations conducted in Brazil, there is a pressing need to conduct an in-depth methodological study of the types of decision models and their applicability in our setting. The objective of this literature review is to contribute to the knowledge and use of decision models in the national context of economic evaluations of health technologies. This article presents general definitions about models and concerns with their use; it describes the main models: decision trees, Markov chains, micro-simulation, simulation of discrete and dynamic events; it discusses the elements involved in the choice of model; and exemplifies the models addressed in national economic evaluation studies of diagnostic and therapeutic preventive technologies and health programs.

Exploring the sociotechnical intersection of patient safety and electronic health record implementation

PubMed Central

Meeks, Derek W; Takian, Amirhossein; Sittig, Dean F; Singh, Hardeep; Barber, Nick

2014-01-01

Objective The intersection of electronic health records (EHR) and patient safety is complex. To examine the applicability of two previously developed conceptual models comprehensively to understand safety implications of EHR implementation in the English National Health Service (NHS). Methods We conducted a secondary analysis of interview data from a 30-month longitudinal, prospective, case study-based evaluation of EHR implementation in 12 NHS hospitals. We used a framework analysis approach to apply conceptual models developed by Sittig and Singh to understand better EHR implementation and use: an eight-dimension sociotechnical model and a three-phase patient safety model (safe technology, safe use of technology, and use of technology to improve safety). Results The intersection of patient safety and EHR implementation and use was characterized by risks involving technology (hardware and software, clinical content, and human–computer interfaces), the interaction of technology with non-technological factors, and improper or unsafe use of technology. Our data support that patient safety improvement activities as well as patient safety hazards change as an organization evolves from concerns about safe EHR functionality, ensuring safe and appropriate EHR use, to using the EHR itself to provide ongoing surveillance and monitoring of patient safety. Discussion We demonstrate the face validity of two models for understanding the sociotechnical aspects of safe EHR implementation and the complex interactions of technology within a healthcare system evolving from paper to integrated EHR. Conclusions Using sociotechnical models, including those presented in this paper, may be beneficial to help stakeholders understand, synthesize, and anticipate risks at the intersection of patient safety and health information technology. PMID:24052536

Exploring the sociotechnical intersection of patient safety and electronic health record implementation.

PubMed

Meeks, Derek W; Takian, Amirhossein; Sittig, Dean F; Singh, Hardeep; Barber, Nick

2014-02-01

The intersection of electronic health records (EHR) and patient safety is complex. To examine the applicability of two previously developed conceptual models comprehensively to understand safety implications of EHR implementation in the English National Health Service (NHS). We conducted a secondary analysis of interview data from a 30-month longitudinal, prospective, case study-based evaluation of EHR implementation in 12 NHS hospitals. We used a framework analysis approach to apply conceptual models developed by Sittig and Singh to understand better EHR implementation and use: an eight-dimension sociotechnical model and a three-phase patient safety model (safe technology, safe use of technology, and use of technology to improve safety). The intersection of patient safety and EHR implementation and use was characterized by risks involving technology (hardware and software, clinical content, and human-computer interfaces), the interaction of technology with non-technological factors, and improper or unsafe use of technology. Our data support that patient safety improvement activities as well as patient safety hazards change as an organization evolves from concerns about safe EHR functionality, ensuring safe and appropriate EHR use, to using the EHR itself to provide ongoing surveillance and monitoring of patient safety. We demonstrate the face validity of two models for understanding the sociotechnical aspects of safe EHR implementation and the complex interactions of technology within a healthcare system evolving from paper to integrated EHR. Using sociotechnical models, including those presented in this paper, may be beneficial to help stakeholders understand, synthesize, and anticipate risks at the intersection of patient safety and health information technology.

AN INTEGRATED PERSPECTIVE ON THE ASSESSMENT OF TECHNOLOGIES: INTEGRATE-HTA.

PubMed

Wahlster, Philip; Brereton, Louise; Burns, Jacob; Hofmann, Björn; Mozygemba, Kati; Oortwijn, Wija; Pfadenhauer, Lisa; Polus, Stephanie; Rehfuess, Eva; Schilling, Imke; van der Wilt, Gert Jan; Gerhardus, Ansgar

2017-01-01

Current health technology assessment (HTA) is not well equipped to assess complex technologies as insufficient attention is being paid to the diversity in patient characteristics and preferences, context, and implementation. Strategies to integrate these and several other aspects, such as ethical considerations, in a comprehensive assessment are missing. The aim of the European research project INTEGRATE-HTA was to develop a model for an integrated HTA of complex technologies. A multi-method, four-stage approach guided the development of the INTEGRATE-HTA Model: (i) definition of the different dimensions of information to be integrated, (ii) literature review of existing methods for integration, (iii) adjustment of concepts and methods for assessing distinct aspects of complex technologies in the frame of an integrated process, and (iv) application of the model in a case study and subsequent revisions. The INTEGRATE-HTA Model consists of five steps, each involving stakeholders: (i) definition of the technology and the objective of the HTA; (ii) development of a logic model to provide a structured overview of the technology and the system in which it is embedded; (iii) evidence assessment on effectiveness, economic, ethical, legal, and socio-cultural aspects, taking variability of participants, context, implementation issues, and their interactions into account; (iv) populating the logic model with the data generated in step 3; (v) structured process of decision-making. The INTEGRATE-HTA Model provides a structured process for integrated HTAs of complex technologies. Stakeholder involvement in all steps is essential as a means of ensuring relevance and meaningful interpretation of the evidence.

CoMET: Cost and Mass Evaluation Tool for Spacecraft and Mission Design

NASA Technical Reports Server (NTRS)

Bieber, Ben S.

2005-01-01

New technology in space exploration is often developed without a complete knowledge of its impact. While the immediate benefits of a new technology are obvious, it is harder to understand its indirect consequences, which ripple through the entire system. COMET is a technology evaluation tool designed to illuminate how specific technology choices affect a mission at each system level. COMET uses simplified models for mass, power, and cost to analyze performance parameters of technologies of interest. The sensitivity analysis that CoMET provides shows whether developing a certain technology will greatly benefit the project or not. CoMET is an ongoing project approaching a web-based implementation phase. This year, development focused on the models for planetary daughter craft, such as atmospheric probes, blimps and balloons, and landers. These models are developed through research into historical data, well established rules of thumb, and engineering judgment of experts at JPL. The model is validated by corroboration with JpL advanced mission studies. Other enhancements to COMET include adding launch vehicle analysis and integrating an updated cost model. When completed, COMET will allow technological development to be focused on areas that will most drastically improve spacecraft performance.

Stochastic Technology Choice Model for Consequential Life Cycle Assessment.

PubMed

Kätelhön, Arne; Bardow, André; Suh, Sangwon

2016-12-06

Discussions on Consequential Life Cycle Assessment (CLCA) have relied largely on partial or general equilibrium models. Such models are useful for integrating market effects into CLCA, but also have well-recognized limitations such as the poor granularity of the sectoral definition and the assumption of perfect oversight by all economic agents. Building on the Rectangular-Choice-of-Technology (RCOT) model, this study proposes a new modeling approach for CLCA, the Technology Choice Model (TCM). In this approach, the RCOT model is adapted for its use in CLCA and extended to incorporate parameter uncertainties and suboptimal decisions due to market imperfections and information asymmetry in a stochastic setting. In a case study on rice production, we demonstrate that the proposed approach allows modeling of complex production technology mixes and their expected environmental outcomes under uncertainty, at a high level of detail. Incorporating the effect of production constraints, uncertainty, and suboptimal decisions by economic agents significantly affects technology mixes and associated greenhouse gas (GHG) emissions of the system under study. The case study also shows the model's ability to determine both the average and marginal environmental impacts of a product in response to changes in the quantity of final demand.

The Decision to Adopt Educational Technology in Technical Education: A Multivariate Study

ERIC Educational Resources Information Center

Beasley, Shannon Wilson Sewell

2016-01-01

Since the seminal work of Davis in 1989 produced the Technology Acceptance Model (TAM), researchers have sought to extend the framework and use the resulting models to describe the predictors of technology adoption specific to various populations. Although the TAM has been used to understand the adoption of technology in higher education, most of…

Understanding Student Teachers' Behavioural Intention to Use Technology: Technology Acceptance Model (TAM) Validation and Testing

ERIC Educational Resources Information Center

Wong, Kung-Teck; Osman, Rosma bt; Goh, Pauline Swee Choo; Rahmat, Mohd Khairezan

2013-01-01

This study sets out to validate and test the Technology Acceptance Model (TAM) in the context of Malaysian student teachers' integration of their technology in teaching and learning. To establish factorial validity, data collected from 302 respondents were tested against the TAM using confirmatory factor analysis (CFA), and structural equation…

Transforming the Classroom With Tablet Technology.

PubMed

Sargent, Lana; Miles, Elizabeth

Identifying the most effective models for integrating new technology into the classroom and understanding its effects on educational outcomes are essential for nurse educators. This article describes an educational intervention with tablet technology (iPads) using an innovative case-based learning model in a nursing program. Students reported positive learning outcomes when using the tablet technology for learning course content.

Technological Modeling: Faculty Use of Technologies in Preservice Teacher Education from 2004 to 2012

ERIC Educational Resources Information Center

Hughes, Joan E.; Liu, Sa; Lim, Mihyun

2016-01-01

This 7-year, cross-sectional study of a 1:1 laptop teacher preparatory program in the United States examined the nature and change in faculty technological modeling. Using survey methods, preservice teachers (n = 932) reported their faculty's use of technological activities in coursework. Through descriptive statistics, chi-square tests, and…

[New simulation technologies in neurosurgery].

PubMed

Byvaltsev, V A; Belykh, E G; Konovalov, N A

2016-01-01

The article presents a literature review on the current state of simulation technologies in neurosurgery, a brief description of the basic technology and the classification of simulation models, and examples of simulation models and skills simulators used in neurosurgery. Basic models for the development of physical skills, the spectrum of available computer virtual simulators, and their main characteristics are described. It would be instructive to include microneurosurgical training and a cadaver course of neurosurgical approaches in neurosurgery training programs and to extend the use of three-dimensional imaging. Technologies for producing three-dimensional anatomical models and patient-specific computer simulators as well as improvement of tactile feedback systems and display quality of virtual models are promising areas. Continued professional education necessitates further research for assessing the validity and practical use of simulators and physical models.

The Deflector Selector: A Machine Learning Framework for Prioritizing Deflection Technology Development

NASA Astrophysics Data System (ADS)

Nesvold, E. R.; Erasmus, N.; Greenberg, A.; van Heerden, E.; Galache, J. L.; Dahlstrom, E.; Marchis, F.

2017-02-01

We present a machine learning model that can predict which asteroid deflection technology would be most effective, given the likely population of impactors. Our model can help policy and funding agencies prioritize technology development.

Designing Mathematical Learning Environments for Teachers

ERIC Educational Resources Information Center

Madden, Sandra R.

2010-01-01

Technology use in mathematics often involves either exploratory or expressive modeling. When using exploratory models, students use technology to investigate a premade expert model of some phenomena. When creating expressive models, students have greater flexibility for constructing their own model for investigation using objects and mechanisms…

Methodologies for Optimum Capital Expenditure Decisions for New Medical Technology

PubMed Central

Landau, Thomas P.; Ledley, Robert S.

1980-01-01

This study deals with the development of a theory and an analytical model to support decisions regarding capital expenditures for complex new medical technology. Formal methodologies and quantitative techniques developed by applied mathematicians and management scientists can be used by health planners to develop cost-effective plans for the utilization of medical technology on a community or region-wide basis. In order to maximize the usefulness of the model, it was developed and tested against multiple technologies. The types of technologies studied include capital and labor-intensive technologies, technologies whose utilization rates vary with hospital occupancy rate, technologies whose use can be scheduled, and limited-use and large-use technologies.

Modelling the regional application of stakeholder identified land management strategies.

NASA Astrophysics Data System (ADS)

Irvine, B. J.; Fleskens, L.; Kirkby, M. J.

2012-04-01

The DESIRE project has trialled a series of sustainable land management (SLM) technologies. These technologies have been identified as being beneficial in mitigating land degradation by local stakeholders from a range of semi-arid study sites. The field results and the qualitative WOCAT technology assessment ftom across the study sites have been used to develop the adapted PESERA SLM model. This paper considers the development of the adapted PESERA SLM model and the potential for applying locally successful SLM technologies across a wider range of climatic and environmental conditions with respect to degradation risk, biomass production and the investment cost interface (PESERA/DESMICE). The integrate PESERA/DESMICE model contributes to the policy debate by providing a biophysical and socio-economic assessment of technology and policy scenarios.

The Will, Skill, Tool Model of Technology Integration: Adding Pedagogy as a New Model Construct

ERIC Educational Resources Information Center

Knezek, Gerald; Christensen, Rhonda

2015-01-01

An expansion of the Will, Skill, Tool Model of Technology Integration to include teacher's pedagogical style is proposed by the authors as a means of advancing the predictive power for level of classroom technology integration to beyond 90%. Suggested advantages to this expansion include more precise identification of areas to be targeted for…

Empirical Testing of a Theoretical Extension of the Technology Acceptance Model: An Exploratory Study of Educational Wikis

ERIC Educational Resources Information Center

Liu, Xun

2010-01-01

This study extended the technology acceptance model and empirically tested the new model with wikis, a new type of educational technology. Based on social cognitive theory and the theory of planned behavior, three new variables, wiki self-efficacy, online posting anxiety, and perceived behavioral control, were added to the original technology…

Extending the Technology Acceptance Model to Explore the Intention to Use Second Life for Enhancing Healthcare Education

ERIC Educational Resources Information Center

Chow, Meyrick; Herold, David Kurt; Choo, Tat-Ming; Chan, Kitty

2012-01-01

Learners need to have good reasons to engage and accept e-learning. They need to understand that unless they do, the outcomes will be less favourable. The technology acceptance model (TAM) is the most widely recognized model addressing why users accept or reject technology. This study describes the development and evaluation of a virtual…

Simulation and Modeling Capability for Standard Modular Hydropower Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, Kevin M.; Smith, Brennan T.; Witt, Adam M.

Grounded in the stakeholder-validated framework established in Oak Ridge National Laboratory’s SMH Exemplary Design Envelope Specification, this report on Simulation and Modeling Capability for Standard Modular Hydropower (SMH) Technology provides insight into the concepts, use cases, needs, gaps, and challenges associated with modeling and simulating SMH technologies. The SMH concept envisions a network of generation, passage, and foundation modules that achieve environmentally compatible, cost-optimized hydropower using standardization and modularity. The development of standardized modeling approaches and simulation techniques for SMH (as described in this report) will pave the way for reliable, cost-effective methods for technology evaluation, optimization, and verification.

Endogenous technological and demographic change under increasing water scarcity

NASA Astrophysics Data System (ADS)

Pande, Saket; Ertsen, Maurits; Sivapalan, Murugesu

2014-05-01

The ancient civilization in the Indus Valley civilization dispersed under extreme dry conditions; there are indications that the same holds for many other ancient societies. Even contemporary societies, such as the one in Murrumbidgee river basin in Australia, have started to witness a decline in overall population under increasing water scarcity. Hydroclimatic change may not be the sole predictor of the fate of contemporary societies in water scarce regions and many critics of such (perceived) hydroclimatic determinism have suggested that technological change may ameliorate the effects of increasing water scarcity and as such counter the effects of hydroclimatic changes. To study the role of technological change on the dynamics of coupled human-water systems, we develop a simple overlapping-generations model of endogenous technological and demographic change. We model technological change as an endogenous process that depends on factors such as the investments that are (endogenously) made in a society, the (endogenous) diversification of a society into skilled and unskilled workers, a society's patience in terms of its present consumption vs. future consumption, production technology and the (endogenous) interaction of all of these factors. In the model the population growth rate is programmed to decline once consumption per capita crosses a "survival" threshold. This means we do not treat technology as an exogenous random sequence of events, but instead assume that it results (endogenously) from societal actions. The model demonstrates that technological change may indeed ameliorate the effects of increasing water scarcity but typically it does so only to a certain extent. It is possible that technological change may allow a society to escape the effect of increasing water scarcity, leading to a (super)-exponential rise in technology and population. However, such cases require the rate of success of investment in technological advancement to be high. In other more realistic cases of technological success, we find that endogenous technology change only helps to delay the peak of population size before it inevitably starts to decline. While the model is a rather simple model of societal development, it is shown to be capable of replicating patterns of technological and population changes. It is capable of replicating the pattern of declining consumption per capita in presence of growth in aggregate production. It is also capable of replicating an exponential population rise, even under increasing water scarcity. The results of the model suggest that societies that declined or are declining in the face of extreme water scarcity may have done so due to slower rate of success of investment in technological advancement. The model suggests that the population decline occurs after a prolonged decline in consumption per capita, which in turn is due to the joint effect of initially increasing population and increasing water scarcity. This is despite technological advancement and increase in aggregate production. We suggest that declining consumption per capita despite technological advancement and increase in aggregate production may serve as a useful predictor of upcoming decline in contemporary societies in water scarce basins.

Endogenous technological and population change under increasing water scarcity

NASA Astrophysics Data System (ADS)

Pande, S.; Ertsen, M.; Sivapalan, M.

2013-11-01

The ancient civilization in the Indus Valley civilization dispersed under extreme dry conditions; there are indications that the same holds for many other ancient societies. Even contemporary societies, such as the one in Murrumbidgee river basin in Australia, have started to witness a decline in overall population under increasing water scarcity. Hydroclimatic change may not be the sole predictor of the fate of contemporary societies in water scarce regions and many critics of such (perceived) hydroclimatic determinism have suggested that technological change may ameliorate the effects of increasing water scarcity and as such counter the effects of hydroclimatic changes. To study the role of technological change on the dynamics of coupled human-water systems, we develop a simple overlapping-generations model of endogenous technological and demographic change. We model technological change as an endogenous process that depends on factors such as the investments that are (endogenously) made in a society, the (endogenous) diversification of a society into skilled and unskilled workers, a society's patience in terms of its present consumption vs. future consumption, production technology and the (endogenous) interaction of all of these factors. In the model the population growth rate is programmed to decline once consumption per capita crosses a "survival" threshold. This means we do not treat technology as an exogenous random sequence of events, but instead assume that it results (endogenously) from societal actions. The model demonstrates that technological change may indeed ameliorate the effects of increasing water scarcity but typically it does so only to a certain extent. It is possible that technological change may allow a society to escape the effect of increasing water scarcity, leading to a (super)-exponential rise in technology and population. However, such cases require the rate of success of investment in technological advancement to be high. In other more realistic cases of technological success, we find that endogenous technology change only helps to delay the peak of population size before it inevitably starts to decline. While the model is a rather simple model of societal development, it is shown to be capable of replicating patterns of technological and population changes. It is capable of replicating the pattern of declining consumption per capita in presence of growth in aggregate production. It is also capable of replicating an exponential population rise, even under increasing water scarcity. The results of the model suggest that societies that declined or are declining in the face of extreme water scarcity may have done so due to slower rate of success of investment in technological advancement. The model suggests that the population decline occurs after a prolonged decline in consumption per capita, which in turn is due to the joint effect of initially increasing population and increasing water scarcity. This is despite technological advancement and increase in aggregate production. We suggest that declining consumption per capita despite technological advancement and increase in aggregate production may serve as a useful predictor of upcoming decline in contemporary societies in water scarce basins.

The Triangle Model for evaluating the effect of health information technology on healthcare quality and safety

PubMed Central

Kern, Lisa M; Abramson, Erika; Kaushal, Rainu

2011-01-01

With the proliferation of relatively mature health information technology (IT) systems with large numbers of users, it becomes increasingly important to evaluate the effect of these systems on the quality and safety of healthcare. Previous research on the effectiveness of health IT has had mixed results, which may be in part attributable to the evaluation frameworks used. The authors propose a model for evaluation, the Triangle Model, developed for designing studies of quality and safety outcomes of health IT. This model identifies structure-level predictors, including characteristics of: (1) the technology itself; (2) the provider using the technology; (3) the organizational setting; and (4) the patient population. In addition, the model outlines process predictors, including (1) usage of the technology, (2) organizational support for and customization of the technology, and (3) organizational policies and procedures about quality and safety. The Triangle Model specifies the variables to be measured, but is flexible enough to accommodate both qualitative and quantitative approaches to capturing them. The authors illustrate this model, which integrates perspectives from both health services research and biomedical informatics, with examples from evaluations of electronic prescribing, but it is also applicable to a variety of types of health IT systems. PMID:21857023

Assessing public forecasts to encourage accountability: The case of MIT's Technology Review.

PubMed

Funk, Jeffrey

2017-01-01

Although high degrees of reliability have been found for many types of forecasts purportedly due to the existence of accountability, public forecasts of technology are rarely assessed and continue to have a poor reputation. This paper's analysis of forecasts made by MIT's Technology Review provides a rare assessment and thus a means to encourage accountability. It first shows that few of the predicted "breakthrough technologies" currently have large markets. Only four have sales greater than $10 billion while eight technologies not predicted by Technology Review have sales greater than $10 billion including three with greater than $100 billion and one other with greater than $50 billion. Second, possible reasons for these poor forecasts are then discussed including an over emphasis on the science-based process of technology change, sometimes called the linear model of innovation. Third, this paper describes a different model of technology change, one that is widely used by private companies and that explains the emergence of those technologies that have greater than $10 billion in sales. Fourth, technology change and forecasts are discussed in terms of cognitive biases and mental models.

Using the NIATx Model to Implement User-Centered Design of Technology for Older Adults.

PubMed

Gustafson, David H; Maus, Adam; Judkins, Julianne; Dinauer, Susan; Isham, Andrew; Johnson, Roberta; Landucci, Gina; Atwood, Amy K

2016-01-14

What models can effectively guide the creation of eHealth and mHealth technologies? This paper describes the use of the NIATx model as a framework for the user-centered design of a new technology for older adults. The NIATx model is a simple framework of process improvement based on the following principles derived from an analysis of decades of research from various industries about why some projects fail and others succeed: (1) Understand and involve the customer; (2) fix key problems; (3) pick an influential change leader; (4) get ideas from outside the field; (5) use rapid-cycle testing. This paper describes the use of these principles in technology development, the strengths and challenges of using this approach in this context, and lessons learned from the process. Overall, the NIATx model enabled us to produce a user-focused technology that the anecdotal evidence available so far suggests is engaging and useful to older adults. The first and fourth principles were especially important in developing the technology; the fourth proved the most challenging to use.

Using the NIATx Model to Implement User-Centered Design of Technology for Older Adults

PubMed Central

Maus, Adam; Judkins, Julianne; Dinauer, Susan; Isham, Andrew; Johnson, Roberta; Landucci, Gina; Atwood, Amy K

2016-01-01

What models can effectively guide the creation of eHealth and mHealth technologies? This paper describes the use of the NIATx model as a framework for the user-centered design of a new technology for older adults. The NIATx model is a simple framework of process improvement based on the following principles derived from an analysis of decades of research from various industries about why some projects fail and others succeed: (1) Understand and involve the customer; (2) fix key problems; (3) pick an influential change leader; (4) get ideas from outside the field; (5) use rapid-cycle testing. This paper describes the use of these principles in technology development, the strengths and challenges of using this approach in this context, and lessons learned from the process. Overall, the NIATx model enabled us to produce a user-focused technology that the anecdotal evidence available so far suggests is engaging and useful to older adults. The first and fourth principles were especially important in developing the technology; the fourth proved the most challenging to use. PMID:27025985

Benefit Estimates of Terminal Area Productivity Program Technologies

NASA Technical Reports Server (NTRS)

Hemm, Robert; Shapiro, Gerald; Lee, David; Gribko, Joana; Glaser, Bonnie

1999-01-01

This report documents benefit analyses for the NASA Terminal Area Technology (TAP) technology programs. Benefits are based on reductions in arrival delays at ten major airports over the 10 years from 2006 through 2015. Detailed analytic airport capacity and delay models were constructed to produce the estimates. The goal of TAP is enable good weather operations tempos in all weather conditions. The TAP program includes technologies to measure and predict runway occupancy times, reduce runway occupancy times in bad weather, accurately predict wake vortex hazards, and couple controller automation with aircraft flight management systems. The report presents and discusses the estimate results and describes the models. Three appendixes document the model algorithms and discuss the input parameters selected for the TAP technologies. The fourth appendix is the user's guide for the models. The results indicate that the combined benefits for all TAP technologies at all 10 airports range from $550 to $650 million per year (in constant 1997 dollars). Additional benefits will accrue from reductions in departure delays. Departure delay benefits are calculated by the current models.

Using Avatars to Model Weight Loss Behaviors: Participant Attitudes and Technology Development

PubMed Central

Napolitano, Melissa A.; Hayes, Sharon; Russo, Giuseppe; Muresu, Debora; Giordano, Antonio; Foster, Gary D.

2013-01-01

Background: Virtual reality and other avatar-based technologies are potential methods for demonstrating and modeling weight loss behaviors. This study examined avatar-based technology as a tool for modeling weight loss behaviors. Methods: This study consisted of two phases: (1) an online survey to obtain feedback about using avatars for modeling weight loss behaviors and (2) technology development and usability testing to create an avatar-based technology program for modeling weight loss behaviors. Results: Results of phase 1 (n = 128) revealed that interest was high, with 88.3% stating that they would participate in a program that used an avatar to help practice weight loss skills in a virtual environment. In phase 2, avatars and modules to model weight loss skills were developed. Eight women were recruited to participate in a 4-week usability test, with 100% reporting they would recommend the program and that it influenced their diet/exercise behavior. Most women (87.5%) indicated that the virtual models were helpful. After 4 weeks, average weight loss was 1.6 kg (standard deviation = 1.7). Conclusion: This investigation revealed a high level of interest in an avatar-based program, with formative work indicating promise. Given the high costs associated with in vivo exposure and practice, this study demonstrates the potential use of avatar-based technology as a tool for modeling weight loss behaviors. PMID:23911189

Hospital adoption of medical technology: an empirical test of alternative models.

PubMed Central

Teplensky, J. D.; Pauly, M. V.; Kimberly, J. R.; Hillman, A. L.; Schwartz, J. S.

1995-01-01

OBJECTIVE. This study examines hospital motivations to acquire new medical technology, an issue of considerable policy relevance: in this case, whether, when, and why hospitals acquire a new capital-intensive medical technology, magnetic resonance imaging equipment (MRI). STUDY DESIGN. We review three common explanations for medical technology adoption: profit maximization, technological preeminence, and clinical excellence, and incorporate them into a composite model, controlling for regulatory differences, market structures, and organizational characteristics. All four models are then tested using Cox regressions. DATA SOURCES. The study is based on an initial sample of 637 hospitals in the continental United States that owned or leased an MRI unit as of 31 December 1988, plus nonadopters. Due to missing data the final sample consisted of 507 hospitals. The data, drawn from two telephone surveys, are supplemented by the AHA Survey, census data, and industry and academic sources. PRINCIPAL FINDING. Statistically, the three individual models account for roughly comparable amounts of variance in past adoption behavior. On the basis of explanatory power and parsimony, however, the technology model is "best." Although the composite model is statistically better than any of the individual models, it does not add much more explanatory power adjusting for the number of variables added. CONCLUSIONS. The composite model identified the importance a hospital attached to being a technological leader, its clinical requirements, and the change in revenues it associated with the adoption of MRI as the major determinants of adoption behavior. We conclude that a hospital's adoption behavior is strongly linked to its strategic orientation. PMID:7649751

Public health and valorization of genome-based technologies: a new model.

PubMed

Lal, Jonathan A; Schulte In den Bäumen, Tobias; Morré, Servaas A; Brand, Angela

2011-12-05

The success rate of timely translation of genome-based technologies to commercially feasible products/services with applicability in health care systems is significantly low. We identified both industry and scientists neglect health policy aspects when commercializing their technology, more specifically, Public Health Assessment Tools (PHAT) and early on involvement of decision makers through which market authorization and reimbursements are dependent. While Technology Transfer (TT) aims to facilitate translation of ideas into products, Health Technology Assessment, one component of PHAT, for example, facilitates translation of products/processes into healthcare services and eventually comes up with recommendations for decision makers. We aim to propose a new model of valorization to optimize integration of genome-based technologies into the healthcare system. The method used to develop our model is an adapted version of the Fish Trap Model and the Basic Design Cycle. We found although different, similarities exist between TT and PHAT. Realizing the potential of being mutually beneficial justified our proposal of their relative parallel initiation. We observed that the Public Health Genomics Wheel should be included in this relative parallel activity to ensure all societal/policy aspects are dealt with preemptively by both stakeholders. On further analysis, we found out this whole process is dependent on the Value of Information. As a result, we present our LAL (Learning Adapting Leveling) model which proposes, based on market demand; TT and PHAT by consultation/bi-lateral communication should advocate for relevant technologies. This can be achieved by public-private partnerships (PPPs). These widely defined PPPs create the innovation network which is a developing, consultative/collaborative-networking platform between TT and PHAT. This network has iterations and requires learning, assimilating and using knowledge developed and is called absorption capacity. We hypothesize that the higher absorption capacity, higher success possibility. Our model however does not address the phasing out of technology although we believe the same model can be used to simultaneously phase out a technology. This model proposes to facilitate optimization/decrease the timeframe of integration in healthcare. It also helps industry and researchers to come to a strategic decision at an early stage, about technology being developed thus, saving on resources, hence minimizing failures.

Detailed Modeling of Distillation Technologies for Closed-Loop Water Recovery Systems

NASA Technical Reports Server (NTRS)

Allada, Rama Kumar; Lange, Kevin E.; Anderson, Molly S.

2011-01-01

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA?s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents efforts to develop chemical process simulations for three technologies: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system and the Wiped-Film Rotating Disk (WFRD) using the Aspen Custom Modeler and Aspen Plus process simulation tools. The paper discusses system design, modeling details, and modeling results for each technology and presents some comparisons between the model results and recent test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Applications of aerospace technology in biology and medicine

NASA Technical Reports Server (NTRS)

Beall, H. C.; Beadles, R. L.; Brown, J. N., Jr.; Clingman, W. H.; Courtney, M. W.; Rouse, D. J.; Scearce, R. W.

1979-01-01

Medical products utilizing and incorporating aerospace technology were studied. A bipolar donor-recipient model for medical transfer is presented. The model is designed to: (1) identify medical problems and aerospace technology which constitute opportunities for successful medical products; (2) obtain early participation of industry in the transfer process; and (3) obtain acceptance by medical community of new medical products based on aerospace technology.

Perceived Convenience in an Extended Technology Acceptance Model: Mobile Technology and English Learning for College Students

ERIC Educational Resources Information Center

Chang, Chi-Cheng; Yan, Chi-Fang; Tseng, Ju-Shih

2012-01-01

Since convenience is one of the features for mobile learning, does it affect attitude and intention of using mobile technology? The technology acceptance model (TAM), proposed by David (1989), was extended with perceived convenience in the present study. With regard to English language mobile learning, the variables in the extended TAM and its…

Efficiency of the Technology Acceptance Model to Explain Pre-Service Teachers' Intention to Use Technology: A Turkish Study

ERIC Educational Resources Information Center

Teo, Timothy; Ursavas, Omer Faruk; Bahcekapili, Ekrem

2011-01-01

Purpose: The purpose of this study is to assess the efficiency of the technology acceptance model (TAM) to explain pre-service teachers' intention to use technology in Turkey. Design/methodology/approach: A total of 197 pre-service teachers from a Turkish university completed a survey questionnaire measuring their responses to four constructs…

Comprehensive Study of Educational Technology Programs Authorized from 1989-1992. Volume II: Model Technology Schools, Level I.

ERIC Educational Resources Information Center

Far West Lab. for Educational Research and Development, San Francisco, CA.

This report, the second in a series of six, presents the findings of evaluative studies of six Level I Model Technology School sites which were conducted as part of Phase II of the California Educational Technology Assessment Program. The project sites are: Alhambra City School District (two schools); Cupertino Union Elementary District and…

Examining the functionality of the DeLone and McLean information system success model as a framework for synthesis in nursing information and communication technology research.

PubMed

Booth, Richard G

2012-06-01

In this review, studies examining information and communication technology used by nurses in clinical practice were examined. Overall, a total of 39 studies were assessed spanning a time period from 1995 to 2008. The impacts of the various health information and communication technology evaluated by individual studies were synthesized using the DeLone and McLean's six-dimensional framework for evaluating information systems success (ie, System Quality, Information Quality, Service Quality, Use, User Satisfaction, and Net Benefits). Overall, the majority of researchers reported results related to the overall Net Benefits (positive, negative, and indifferent) of the health information and communication technology used by nurses. Attitudes and user satisfaction with technology were also commonly measured attributes. The current iteration of DeLone and McLean model is effective at synthesizing basic elements of health information and communication technology use by nurses. Regardless, the current model lacks the sociotechnical sensitivity to capture deeper nurse-technology relationalities. Limitations and recommendations are provided for researchers considering using the DeLone and McLean model for evaluating health information and communication technology used by nurses.

Applications of statistical physics to technology price evolution

NASA Astrophysics Data System (ADS)

McNerney, James

Understanding how changing technology affects the prices of goods is a problem with both rich phenomenology and important policy consequences. Using methods from statistical physics, I model technology-driven price evolution. First, I examine a model for the price evolution of individual technologies. The price of a good often follows a power law equation when plotted against its cumulative production. This observation turns out to have significant consequences for technology policy aimed at mitigating climate change, where technologies are needed that achieve low carbon emissions at low cost. However, no theory adequately explains why technology prices follow power laws. To understand this behavior, I simplify an existing model that treats technologies as machines composed of interacting components. I find that the power law exponent of the price trajectory is inversely related to the number of interactions per component. I extend the model to allow for more realistic component interactions and make a testable prediction. Next, I conduct a case-study on the cost evolution of coal-fired electricity. I derive the cost in terms of various physical and economic components. The results suggest that commodities and technologies fall into distinct classes of price models, with commodities following martingales, and technologies following exponentials in time or power laws in cumulative production. I then examine the network of money flows between industries. This work is a precursor to studying the simultaneous evolution of multiple technologies. Economies resemble large machines, with different industries acting as interacting components with specialized functions. To begin studying the structure of these machines, I examine 20 economies with an emphasis on finding common features to serve as targets for statistical physics models. I find they share the same money flow and industry size distributions. I apply methods from statistical physics to show that industries cluster the same way according to industry type. Finally, I use these industry money flows to model the price evolution of many goods simultaneously, where network effects become important. I derive a prediction for which goods tend to improve most rapidly. The fastest-improving goods are those with the highest mean path lengths in the money flow network.

Technology Acceptance Model for Wireless Internet.

ERIC Educational Resources Information Center

Lu, June; Yu, Chun-Sheng; Liu, Chang; Yao, James E.

2003-01-01

Develops a technology acceptance model (TAM) for wireless Internet via mobile devices (WIMD) and proposes that constructs, such as individual differences, technology complexity, facilitating conditions, social influences, and wireless trust environment determine user-perceived short and long-term usefulness, and ease of using WIMD. Twelve…

Recent development on computer aided tissue engineering--a review.

PubMed

Sun, Wei; Lal, Pallavi

2002-02-01

The utilization of computer-aided technologies in tissue engineering has evolved in the development of a new field of computer-aided tissue engineering (CATE). This article reviews recent development and application of enabling computer technology, imaging technology, computer-aided design and computer-aided manufacturing (CAD and CAM), and rapid prototyping (RP) technology in tissue engineering, particularly, in computer-aided tissue anatomical modeling, three-dimensional (3-D) anatomy visualization and 3-D reconstruction, CAD-based anatomical modeling, computer-aided tissue classification, computer-aided tissue implantation and prototype modeling assisted surgical planning and reconstruction.

U.S.A.B.I.L.I.T.Y. Framework for Older Adults.

PubMed

Caboral-Stevens, Meriam; Whetsell, Martha V; Evangelista, Lorraine S; Cypress, Brigitte; Nickitas, Donna

2015-01-01

The purpose of the current study was to present a framework to determine potential usability of health websites by older adults. Review of the literature showed paucity of nursing theory related to the use of technology and usability, particularly in older adults. The Roy Adaptation Model, a widely used nursing theory, was chosen to provide framework for the new model. Technology constructs from the Technology Acceptance Model and United Theory of Acceptance and Use of Technology and behavioral control construct from the Theory of Planned Behavior were integrated into the construction of the derived model. The Use of Technology for Adaptation by Older Adults and/or Those With Limited Literacy (U.S.A.B.I.L.I.T.Y.) Model was constructed from the integration of diverse theoretical/conceptual perspectives. The four determinants of usability in the conceptual model include (a) efficiency, (b) learnability, (c) perceived user experience, and (d) perceived control. Because of the lack of well-validated survey questionnaires to measure these determinants, a U.S.A.B.I.L.I.T.Y. Survey was developed. A panel of experts evaluated face and content validity of the new instrument. Internal consistency of the new instrument was 0.96. Usability is key to accepting technology. The derived U.S.A.B.I.L.I.T.Y. framework could serve as a guide for nurses in formative evaluation of technology. Copyright 2015, SLACK Incorporated.

In-Space Propulsion Technology Products Ready for Infusion on NASA's Future Science Missions

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil, Eric; Peterson, Todd; Dankanich, John; Munk, Michele M.

2012-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies that will enable or enhance NASA robotic science missions. These in-space propulsion technologies are applicable, and potentially enabling, for future NASA flagship and sample return missions currently being considered. They have a broad applicability to future competed mission solicitations. The high-temperature Advanced Material Bipropellant Rocket (AMBR) engine, providing higher performance for lower cost, was completed in 2009. Two other ISPT technologies are nearing completion of their technology development phase: 1) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 2) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; aerothermal effect models; and atmospheric models for Earth, Titan, Mars and Venus. This paper provides status of the technology development, applicability, and availability of in-space propulsion technologies that have recently completed their technology development and will be ready for infusion into NASA s Discovery, New Frontiers, SMD Flagship, or technology demonstration missions.

In-Space Propulsion Technology Products for NASA's Future Science and Exploration Missions

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil, Eric; Peterson, Todd; Dankanich, John; Munk, Michelle M.

2011-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) project has been developing and delivering in-space propulsion technologies that will enable or enhance NASA robotic science missions. These in-space propulsion technologies are applicable, and potentially enabling, for future NASA flagship and sample return missions currently being considered, as well as having broad applicability to future competed mission solicitations. The high-temperature Advanced Material Bipropellant Rocket (AMBR) engine providing higher performance for lower cost was completed in 2009. Two other ISPT technologies are nearing completion of their technology development phase: 1) NASA's Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 2) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; aerothermal effect models: and atmospheric models for Earth, Titan, Mars and Venus. This paper provides status of the technology development, applicability, and availability of in-space propulsion technologies that have recently completed their technology development and will be ready for infusion into NASA s Discovery, New Frontiers, Science Mission Directorate (SMD) Flagship, and Exploration technology demonstration missions

A CityGML extension for traffic-sign objects that guides the automatic processing of data collected using Mobile Mapping technology

NASA Astrophysics Data System (ADS)

Varela-González, M.; Riveiro, B.; Arias-Sánchez, P.; González-Jorge, H.; Martínez-Sánchez, J.

2014-11-01

The rapid evolution of integral schemes, accounting for geometric and semantic data, has been importantly motivated by the advances in the last decade in mobile laser scanning technology; automation in data processing has also recently influenced the expansion of the new model concepts. This paper reviews some important issues involved in the new paradigms of city 3D modelling: an interoperable schema for city 3D modelling (cityGML) and mobile mapping technology to provide the features that composing the city model. This paper focuses in traffic signs, discussing their characterization using cityGML in order to ease the implementation of LiDAR technology in road management software, as well as analysing some limitations of the current technology in the labour of automatic detection and classification.

Comparative Effectiveness of a Technology-Facilitated Depression Care Management Model in Safety-Net Primary Care Patients With Type 2 Diabetes: 6-Month Outcomes of a Large Clinical Trial

PubMed Central

Ell, Kathleen; Jin, Haomiao; Vidyanti, Irene; Chou, Chih-Ping; Lee, Pey-Jiuan; Gross-Schulman, Sandra; Sklaroff, Laura Myerchin; Belson, David; Nezu, Arthur M; Hay, Joel; Wang, Chien-Ju; Scheib, Geoffrey; Di Capua, Paul; Hawkins, Caitlin; Liu, Pai; Ramirez, Magaly; Wu, Brian W; Richman, Mark; Myers, Caitlin; Agustines, Davin; Dasher, Robert; Kopelowicz, Alex; Allevato, Joseph; Roybal, Mike; Ipp, Eli; Haider, Uzma; Graham, Sharon; Mahabadi, Vahid; Guterman, Jeffrey

2018-01-01

Background Comorbid depression is a significant challenge for safety-net primary care systems. Team-based collaborative depression care is effective, but complex system factors in safety-net organizations impede adoption and result in persistent disparities in outcomes. Diabetes-Depression Care-management Adoption Trial (DCAT) evaluated whether depression care could be significantly improved by harnessing information and communication technologies to automate routine screening and monitoring of patient symptoms and treatment adherence and allow timely communication with providers. Objective The aim of this study was to compare 6-month outcomes of a technology-facilitated care model with a usual care model and a supported care model that involved team-based collaborative depression care for safety-net primary care adult patients with type 2 diabetes. Methods DCAT is a translational study in collaboration with Los Angeles County Department of Health Services, the second largest safety-net care system in the United States. A comparative effectiveness study with quasi-experimental design was conducted in three groups of adult patients with type 2 diabetes to compare three delivery models: usual care, supported care, and technology-facilitated care. Six-month outcomes included depression and diabetes care measures and patient-reported outcomes. Comparative treatment effects were estimated by linear or logistic regression models that used generalized propensity scores to adjust for sampling bias inherent in the nonrandomized design. Results DCAT enrolled 1406 patients (484 in usual care, 480 in supported care, and 442 in technology-facilitated care), most of whom were Hispanic or Latino and female. Compared with usual care, both the supported care and technology-facilitated care groups were associated with significant reduction in depressive symptoms measured by scores on the 9-item Patient Health Questionnaire (least squares estimate, LSE: usual care=6.35, supported care=5.05, technology-facilitated care=5.16; P value: supported care vs usual care=.02, technology-facilitated care vs usual care=.02); decreased prevalence of major depression (odds ratio, OR: supported care vs usual care=0.45, technology-facilitated care vs usual care=0.33; P value: supported care vs usual care=.02, technology-facilitated care vs usual care=.007); and reduced functional disability as measured by Sheehan Disability Scale scores (LSE: usual care=3.21, supported care=2.61, technology-facilitated care=2.59; P value: supported care vs usual care=.04, technology-facilitated care vs usual care=.03). Technology-facilitated care was significantly associated with depression remission (technology-facilitated care vs usual care: OR=2.98, P=.04); increased satisfaction with care for emotional problems among depressed patients (LSE: usual care=3.20, technology-facilitated care=3.70; P=.05); reduced total cholesterol level (LSE: usual care=176.40, technology-facilitated care=160.46; P=.01); improved satisfaction with diabetes care (LSE: usual care=4.01, technology-facilitated care=4.20; P=.05); and increased odds of taking an glycated hemoglobin test (technology-facilitated care vs usual care: OR=3.40, P<.001). Conclusions Both the technology-facilitated care and supported care delivery models showed potential to improve 6-month depression and functional disability outcomes. The technology-facilitated care model has a greater likelihood to improve depression remission, patient satisfaction, and diabetes care quality. PMID:29685872

The NTeQ ISD Model: A Tech-Driven Model for Digital Natives (DNs)

ERIC Educational Resources Information Center

Williams, C.; Anekwe, J. U.

2017-01-01

Integrating Technology for enquiry (NTeQ) instructional development model (ISD), is believed to be a technology-driven model. The authors x-rayed the ten-step model to reaffirm the ICT knowledge demand of the learner and the educator; hence computer-based activities at various stages of the model are core elements. The model also is conscious of…

Astrophysics space systems critical technology needs

NASA Technical Reports Server (NTRS)

Gartrell, C. F.

1982-01-01

This paper addresses an independent assessment of space system technology needs for future astrophysics flight programs contained within the NASA Space Systems Technology Model. The critical examination of the system needs for the approximately 30 flight programs in the model are compared to independent technology forecasts and possible technology deficits are discussed. These deficits impact the developments needed for spacecraft propulsion, power, materials, structures, navigation, guidance and control, sensors, communications and data processing. There are also associated impacts upon in-orbit assembly technology and space transportation systems. A number of under-utilized technologies are highlighted which could be exploited to reduce cost and enhance scientific return.

Pre-Service Teachers' Modelling Processes through Engagement with Model Eliciting Activities with a Technological Tool

ERIC Educational Resources Information Center

Daher, Wajeeh M.; Shahbari, Juhaina Awawdeh

2015-01-01

Engaging mathematics students with modelling activities helps them learn mathematics meaningfully. This engagement, in the case of model eliciting activities, helps the students elicit mathematical models by interpreting real-world situation in mathematical ways. This is especially true when the students utilize technology to build the models.…

Industry-Cost-Curve Approach for Modeling the Environmental Impact of Introducing New Technologies in Life Cycle Assessment.

PubMed

Kätelhön, Arne; von der Assen, Niklas; Suh, Sangwon; Jung, Johannes; Bardow, André

2015-07-07

The environmental costs and benefits of introducing a new technology depend not only on the technology itself, but also on the responses of the market where substitution or displacement of competing technologies may occur. An internationally accepted method taking both technological and market-mediated effects into account, however, is still lacking in life cycle assessment (LCA). For the introduction of a new technology, we here present a new approach for modeling the environmental impacts within the framework of LCA. Our approach is motivated by consequential life cycle assessment (CLCA) and aims to contribute to the discussion on how to operationalize consequential thinking in LCA practice. In our approach, we focus on new technologies producing homogeneous products such as chemicals or raw materials. We employ the industry cost-curve (ICC) for modeling market-mediated effects. Thereby, we can determine substitution effects at a level of granularity sufficient to distinguish between competing technologies. In our approach, a new technology alters the ICC potentially replacing the highest-cost producer(s). The technologies that remain competitive after the new technology's introduction determine the new environmental impact profile of the product. We apply our approach in a case study on a new technology for chlor-alkali electrolysis to be introduced in Germany.

When technologies makes good people do bad things: another argument against the value-neutrality of technologies.

PubMed

Morrow, David R

2014-06-01

Although many scientists and engineers insist that technologies are value-neutral, philosophers of technology have long argued that they are wrong. In this paper, I introduce a new argument against the claim that technologies are value-neutral. This argument complements and extends, rather than replaces, existing arguments against value-neutrality. I formulate the Value-Neutrality Thesis, roughly, as the claim that a technological innovation can have bad effects, on balance, only if its users have "vicious" or condemnable preferences. After sketching a microeconomic model for explaining or predicting a technology's impact on individuals' behavior, I argue that a particular technological innovation can create or exacerbate collective action problems, even in the absence of vicious preferences. Technologies do this by increasing the net utility of refusing to cooperate. I also argue that a particular technological innovation can induce short-sighted behavior because of humans' tendency to discount future benefits too steeply. I suggest some possible extensions of my microeconomic model of technological impacts. These extensions would enable philosophers of technology to consider agents with mixed motives-i.e., agents who harbor some vicious preferences but also some aversion to acting on them-and to apply the model to questions about the professional responsibilities of engineers, scientists, and other inventors.

Developing internet-based eHealth promotion programs: the Spiral Technology Action Research (STAR) model.

PubMed

Skinner, Harvey A; Maley, Oonagh; Norman, Cameron D

2006-10-01

Health education and health promotion have a tradition of using information and communication technology (ICT). In recent years, the rapid growth of the Internet has created innovative opportunities for Web-based health education and behavior change applications-termed eHealth promotion. However, many eHealth promotion applications are developed without an explicit model to guide the design, evaluation, and ongoing improvement of the program. The spiral technology action research (STAR) model was developed to address this need. The model comprises five cycles (listen, plan, do, study, act) that weave together technological development, community involvement, and continuous improvement. The model is illustrated by a case study describing the development of the Smoking Zine (www.SmokingZine.org), a youth smoking prevention and cessation Web site.

Using Live Dual Modeling to Help Preservice Teachers Develop TPACK

ERIC Educational Resources Information Center

Lu, Liangyue; Lei, Jing

2012-01-01

To help preservice teachers learn about teaching with technology--specifically, technological pedagogical content knowledge (TPACK)--the researchers designed and implemented a Live Dual Modeling strategy involving both live behavior modeling and cognitive modeling in this study. Using qualitative research methods, the researchers investigated…

Comparison of Vehicle Choice Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephens, Thomas S.; Levinson, Rebecca S.; Brooker, Aaron

Five consumer vehicle choice models that give projections of future sales shares of light-duty vehicles were compared by running each model using the same inputs, where possible, for two scenarios. The five models compared — LVCFlex, MA3T, LAVE-Trans, ParaChoice, and ADOPT — have been used in support of the Energy Efficiency and Renewable Energy (EERE) Vehicle Technologies Office in analyses of future light-duty vehicle markets under different assumptions about future vehicle technologies and market conditions. The models give projections of sales shares by powertrain technology. Projections made using common, but not identical, inputs showed qualitative agreement, with the exception ofmore » ADOPT. ADOPT estimated somewhat lower advanced vehicle shares, mostly composed of hybrid electric vehicles. Other models projected large shares of multiple advanced vehicle powertrains. Projections of models differed in significant ways, including how different technologies penetrated cars and light trucks. Since the models are constructed differently and take different inputs, not all inputs were identical, but were the same or very similar where possible.« less

Be the Technology: Redefining Technology Integration in Classrooms.

ERIC Educational Resources Information Center

Mills, Steven C.; Tincher, Robert C.

A technology professional development initiative was launched in a school district with the goal of extending technology use in the classroom. For teachers to teach expertly, the aim was for them to "be the technology" by modeling technology use in the classroom, applying technology across the curriculum, applying technology to…

The Model Industrial Technology Systems Project.

ERIC Educational Resources Information Center

Bowling Green State Univ., OH.

This document contains materials used in a model industrial technology program that introduced technology into the curricula of elementary, middle, and high schools in three sites in Ohio: the Central site (coordinated through Ohio State University); the Northeast site (coordinated through Kent State University); and the Northwest site…

Factors Affecting Training Effectiveness in Synchronous, Dispersed Virtual Environments

DTIC Science & Technology

2014-06-01

technology to its technical training programs. Specifically, a distance learning model with instruction provided through 3-D virtual worlds could...ABSTRACT The U.S. Navy is investigating the feasibility of incorporating distance learning technology to its technical training programs. Specifically...15 A. TECHNOLOGY ACCEPTANCE MODEL

Network models for solving the problem of multicriterial adaptive optimization of investment projects control with several acceptable technologies

NASA Astrophysics Data System (ADS)

Shorikov, A. F.; Butsenko, E. V.

2017-10-01

This paper discusses the problem of multicriterial adaptive optimization the control of investment projects in the presence of several technologies. On the basis of network modeling proposed a new economic and mathematical model and a method for solving the problem of multicriterial adaptive optimization the control of investment projects in the presence of several technologies. Network economic and mathematical modeling allows you to determine the optimal time and calendar schedule for the implementation of the investment project and serves as an instrument to increase the economic potential and competitiveness of the enterprise. On a meaningful practical example, the processes of forming network models are shown, including the definition of the sequence of actions of a particular investment projecting process, the network-based work schedules are constructed. The calculation of the parameters of network models is carried out. Optimal (critical) paths have been formed and the optimal time for implementing the chosen technologies of the investment project has been calculated. It also shows the selection of the optimal technology from a set of possible technologies for project implementation, taking into account the time and cost of the work. The proposed model and method for solving the problem of managing investment projects can serve as a basis for the development, creation and application of appropriate computer information systems to support the adoption of managerial decisions by business people.

Information Technology Implementation and Sustainment Model: Data Collection Instrument

DTIC Science & Technology

2005-03-01

users (Wing and Bettinger , 2003). A GIS is a computerized system for spatial (geographically-referenced) data management (Davis and Schultz, 1990:3...AFIT/GEM/ENV/05M-15 Abstract The goal of this research was to develop a data collection instrument for an existing information technology...implementation and sustsinment model. In 2003, a unique system dynamics model was developed at the Air Force Institute of Technology to predict the

Implementation and Evaluation of Multiple Adaptive Control Technologies for a Generic Transport Aircraft Simulation

NASA Technical Reports Server (NTRS)

Campbell, Stefan F.; Kaneshige, John T.; Nguyen, Nhan T.; Krishakumar, Kalmanje S.

2010-01-01

Presented here is the evaluation of multiple adaptive control technologies for a generic transport aircraft simulation. For this study, seven model reference adaptive control (MRAC) based technologies were considered. Each technology was integrated into an identical dynamic-inversion control architecture and tuned using a methodology based on metrics and specific design requirements. Simulation tests were then performed to evaluate each technology s sensitivity to time-delay, flight condition, model uncertainty, and artificially induced cross-coupling. The resulting robustness and performance characteristics were used to identify potential strengths, weaknesses, and integration challenges of the individual adaptive control technologies

Conceptual modeling for Prospective Health Technology Assessment.

PubMed

Gantner-Bär, Marion; Djanatliev, Anatoli; Prokosch, Hans-Ulrich; Sedlmayr, Martin

2012-01-01

Prospective Health Technology Assessment (ProHTA) is a new and innovative approach to analyze and assess new technologies, methods and procedures in health care. Simulation processes are used to model innovations before the cost-intensive design and development phase. Thus effects on patient care, the health care system as well as health economics aspects can be estimated. To generate simulation models a valid information base is necessary and therefore conceptual modeling is most suitable. Project-specifically improved methods and characteristics of simulation modeling are combined in the ProHTA Conceptual Modeling Process and initially implemented for acute ischemic stroke treatment in Germany. Additionally the project aims at simulation of other diseases and health care systems as well. ProHTA is an interdisciplinary research project within the Cluster of Excellence for Medical Technology - Medical Valley European Metropolitan Region Nuremberg (EMN), which is funded by the German Federal Ministry of Education and Research (BMBF), project grant No. 01EX1013B.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mundaca, Luis; Neij, Lena; Worrell, Ernst

The growing complexities of energy systems, environmental problems and technology markets are driving and testing most energy-economy models to their limits. To further advance bottom-up models from a multidisciplinary energy efficiency policy evaluation perspective, we review and critically analyse bottom-up energy-economy models and corresponding evaluation studies on energy efficiency policies to induce technological change. We use the household sector as a case study. Our analysis focuses on decision frameworks for technology choice, type of evaluation being carried out, treatment of market and behavioural failures, evaluated policy instruments, and key determinants used to mimic policy instruments. Although the review confirms criticismmore » related to energy-economy models (e.g. unrealistic representation of decision-making by consumers when choosing technologies), they provide valuable guidance for policy evaluation related to energy efficiency. Different areas to further advance models remain open, particularly related to modelling issues, techno-economic and environmental aspects, behavioural determinants, and policy considerations.« less

From PCK to TPACK: Developing a Transformative Model for Pre-Service Science Teachers

NASA Astrophysics Data System (ADS)

Jang, Syh-Jong; Chen, Kuan-Chung

2010-12-01

New science teachers should be equipped with the ability to integrate and design the curriculum and technology for innovative teaching. How to integrate technology into pre-service science teachers' pedagogical content knowledge is the important issue. This study examined the impact on a transformative model of integrating technology and peer coaching for developing technological pedagogical and content knowledge (TPACK) of pre-service science teachers. A transformative model and an online system were designed to restructure science teacher education courses. Participants of this study included an instructor and 12 pre-service teachers. The main sources of data included written assignments, online data, reflective journals, videotapes and interviews. This study expanded four views, namely, the comprehensive, imitative, transformative and integrative views to explore the impact of TPACK. The model could help pre-service teachers develop technological pedagogical methods and strategies of integrating subject-matter knowledge into science lessons, and further enhanced their TPACK.

Effects of '"Environmental Chemistry" Elective Course via Technology-Embedded Scientific Inquiry Model on Some Variables

ERIC Educational Resources Information Center

Çalik, Muammer; Özsevgeç, Tuncay; Ebenezer, Jazlin; Artun, Hüseyin; Küçük, Zeynel

2014-01-01

The purpose of this study is to examine the effects of "environmental chemistry" elective course via Technology-Embedded Scientific Inquiry (TESI) model on senior science student teachers' (SSSTs) conceptions of environmental chemistry concepts/issues, attitudes toward chemistry, and technological pedagogical content knowledge…

A Hypermedia Model for Teaching Technology.

ERIC Educational Resources Information Center

Savage, Ernest N.

Ohio's Model Industrial Technology Systems (MITS) project was initiated in 1987 to achieve the following: identify good activities in the areas of physical, communication, and bio-related technology; standardize the activities' format; and provide a coding system for their eventual use in a hypermedia system. To date, 220 activities have been…

Modelling Benefits-Oriented Costs for Technology Enhanced Learning

ERIC Educational Resources Information Center

Laurillard, Diana

2007-01-01

The introduction of technology enhanced learning (TEL) methods changes the deployment of the most important resource in the education system: teachers' and learners' time. New technology promises greater personalization and greater productivity, but without careful modeling of the effects on the use of staff time, TEL methods can easily increase…

Enhancing Students' Thinking Skills: Exploring Model Technology-Integration Sites.

ERIC Educational Resources Information Center

Moersch, Christopher

1998-01-01

Examines ways to integrate technology into social studies, science, mathematics, and language arts. Describes model elementary and middle-school classrooms in which technology is used to investigate the concept of property, study soil porosity and the water cycle, run a student store, and promote environmental activism. (PEN)

The Impact of Iranian Teachers Cultural Values on Computer Technology Acceptance

ERIC Educational Resources Information Center

Sadeghi, Karim; Saribagloo, Javad Amani; Aghdam, Samad Hanifepour; Mahmoudi, Hojjat

2014-01-01

This study was conducted with the aim of testing the technology acceptance model and the impact of Hofstede cultural values (masculinity/femininity, uncertainty avoidance, individualism/collectivism, and power distance) on computer technology acceptance among teachers at Urmia city (Iran) using the structural equation modeling approach. From among…

Designing Corporate Databases to Support Technology Innovation

ERIC Educational Resources Information Center

Gultz, Michael Jarett

2012-01-01

Based on a review of the existing literature on database design, this study proposed a unified database model to support corporate technology innovation. This study assessed potential support for the model based on the opinions of 200 technology industry executives, including Chief Information Officers, Chief Knowledge Officers and Chief Learning…

Diffusing Innovations in Nursing Education: From PDAs to OERs.

PubMed

Doyle, Glynda; Budz, Bernice

2016-01-01

The Canadian educational and healthcare practice landscapes are ever-evolving technologically. In response to these changes, the British Columbia Institute of Technology (BCIT) has integrated various educational technologies using Rogers Diffusion of Innovation model as a guiding framework for this integration with considerable success. This poster describes BCIT's journey with diffusing innovations, discusses examples of these technological integrations in accordance with Roger's model, and outlines several implications for educational practice.

Assessing the Intention to Use Technology among Pre-Service Teachers in Singapore and Malaysia: A Multigroup Invariance Analysis of the Technology Acceptance Model (TAM)

ERIC Educational Resources Information Center

Teo, Timothy; Lee, Chwee Beng; Chai, Ching Sing; Wong, Su Luan

2009-01-01

This study assesses the pre-service teachers' self-reported future intentions to use technology in Singapore and Malaysia. A survey was employed to validate items from past research. Using the Technology Acceptance Model (TAM) as a research framework, 495 pre-service teachers from Singapore and Malaysia responded to an 11-item questionnaires…

Technology Transition a Model for Infusion and Commercialization

NASA Technical Reports Server (NTRS)

McMillan, Vernotto C.

2006-01-01

The National Aeronautics and Space Administration has as part of its charter the mission of transferring technologies developed for the space program into the private sector for the purpose of affording back to the American people the economical and improved quality of life benefits associated with the technologies developed. In recent years considerable effort has been made to use this program for not only transitioning technologies out of the NASA Mission Directorate Programs, but also to transfer technologies into the Mission Directorate Programs and leverage the impact of government and private sector innovation. The objective of this paper is to outline an approach and the creation of a model that brings together industry, government, and commercialization strategies. When these elements are integrated, the probability of successful technology development, technology infusion into the Mission Programs, and commercialization into the private sector is increased. This model primarily addresses technology readiness levels between TRL 3 and TRL 6. This is typically a gap area known as the valley of death. This gap area is too low for commercial entities to invest heavily and not developed enough for major programs to actively pursue. This model has shown promise for increasing the probably of TRL advancement to an acceptable level for NASA programs and/or commercial entities to afford large investments toward either commercialization or infusion.

Advanced Mirror & Modelling Technology Development

NASA Technical Reports Server (NTRS)

Effinger, Michael; Stahl, H. Philip; Abplanalp, Laura; Maffett, Steven; Egerman, Robert; Eng, Ron; Arnold, William; Mosier, Gary; Blaurock, Carl

2014-01-01

The 2020 Decadal technology survey is starting in 2018. Technology on the shelf at that time will help guide selection to future low risk and low cost missions. The Advanced Mirror Technology Development (AMTD) team has identified development priorities based on science goals and engineering requirements for Ultraviolet Optical near-Infrared (UVOIR) missions in order to contribute to the selection process. One key development identified was lightweight mirror fabrication and testing. A monolithic, stacked, deep core mirror was fused and replicated twice to achieve the desired radius of curvature. It was subsequently successfully polished and tested. A recently awarded second phase to the AMTD project will develop larger mirrors to demonstrate the lateral scaling of the deep core mirror technology. Another key development was rapid modeling for the mirror. One model focused on generating optical and structural model results in minutes instead of months. Many variables could be accounted for regarding the core, face plate and back structure details. A portion of a spacecraft model was also developed. The spacecraft model incorporated direct integration to transform optical path difference to Point Spread Function (PSF) and between PSF to modulation transfer function. The second phase to the project will take the results of the rapid mirror modeler and integrate them into the rapid spacecraft modeler.

Integrating social capital theory, social cognitive theory, and the technology acceptance model to explore a behavioral model of telehealth systems.

PubMed

Tsai, Chung-Hung

2014-05-07

Telehealth has become an increasingly applied solution to delivering health care to rural and underserved areas by remote health care professionals. This study integrated social capital theory, social cognitive theory, and the technology acceptance model (TAM) to develop a comprehensive behavioral model for analyzing the relationships among social capital factors (social capital theory), technological factors (TAM), and system self-efficacy (social cognitive theory) in telehealth. The proposed framework was validated with 365 respondents from Nantou County, located in Central Taiwan. Structural equation modeling (SEM) was used to assess the causal relationships that were hypothesized in the proposed model. The finding indicates that elderly residents generally reported positive perceptions toward the telehealth system. Generally, the findings show that social capital factors (social trust, institutional trust, and social participation) significantly positively affect the technological factors (perceived ease of use and perceived usefulness respectively), which influenced usage intention. This study also confirmed that system self-efficacy was the salient antecedent of perceived ease of use. In addition, regarding the samples, the proposed model fitted considerably well. The proposed integrative psychosocial-technological model may serve as a theoretical basis for future research and can also offer empirical foresight to practitioners and researchers in the health departments of governments, hospitals, and rural communities.

Integrating Social Capital Theory, Social Cognitive Theory, and the Technology Acceptance Model to Explore a Behavioral Model of Telehealth Systems

PubMed Central

Tsai, Chung-Hung

2014-01-01

Telehealth has become an increasingly applied solution to delivering health care to rural and underserved areas by remote health care professionals. This study integrated social capital theory, social cognitive theory, and the technology acceptance model (TAM) to develop a comprehensive behavioral model for analyzing the relationships among social capital factors (social capital theory), technological factors (TAM), and system self-efficacy (social cognitive theory) in telehealth. The proposed framework was validated with 365 respondents from Nantou County, located in Central Taiwan. Structural equation modeling (SEM) was used to assess the causal relationships that were hypothesized in the proposed model. The finding indicates that elderly residents generally reported positive perceptions toward the telehealth system. Generally, the findings show that social capital factors (social trust, institutional trust, and social participation) significantly positively affect the technological factors (perceived ease of use and perceived usefulness respectively), which influenced usage intention. This study also confirmed that system self-efficacy was the salient antecedent of perceived ease of use. In addition, regarding the samples, the proposed model fitted considerably well. The proposed integrative psychosocial-technological model may serve as a theoretical basis for future research and can also offer empirical foresight to practitioners and researchers in the health departments of governments, hospitals, and rural communities. PMID:24810577

Quantifying short run cost-effectiveness during a gradual implementation process.

PubMed

van de Wetering, Gijs; Woertman, Willem H; Verbeek, Andre L; Broeders, Mireille J; Adang, Eddy M M

2013-12-01

This paper examines the short run inefficiencies that arise during gradual implementation of a new cost-effective technology in healthcare. These inefficiencies arise when health gains associated with the new technology cannot be obtained immediately because the new technology does not yet supply all patients, and when there is overcapacity for the old technology in the short run because the supply of care is divided among two mutually exclusive technologies. Such efficiency losses are not taken into account in standard textbook cost-effectiveness analysis in which a steady state is presented where costs and effects are assumed to be unchanging over time. A model is constructed to quantify such short run inefficiencies as well as to inform the decision maker about the optimal implementation pattern for the new technology. The model operates by integrating the incremental net benefit equations for both the period of co-existence of mutually exclusive technologies and the period after complete substitution of the old technology. It takes into account the rate of implementation of the new technology, depreciation of capital of the old technology as well as the demand curves for both technologies. The model is applied to the real world case of converting from screen film to digital mammography in the Netherlands.

Examining the Factors Affecting PDA Acceptance among Physicians: An Extended Technology Acceptance Model.

PubMed

Basak, Ecem; Gumussoy, Cigdem Altin; Calisir, Fethi

2015-01-01

This study aims at identifying the factors affecting the intention to use personal digital assistant (PDA) technology among physicians in Turkey using an extended Technology Acceptance Model (TAM). A structural equation-modeling approach was used to identify the variables that significantly affect the intention to use PDA technology. The data were collected from 339 physicians in Turkey. Results indicated that 71% of the physicians' intention to use PDA technology is explained by perceived usefulness and perceived ease of use. On comparing both, the perceived ease of use has the strongest effect, whereas the effect of perceived enjoyment on behavioral intention to use is found to be insignificant. This study concludes with the recommendations for managers and possible future research.

"Soft Technology" and Criticism of the Western Model of Development

ERIC Educational Resources Information Center

Harper, Peter

1973-01-01

Alternatives to the capitalistic Western model of develoment are suggested. Three problems afflicting Western society--alienation, resource exploitation, and eviornmental stability--are discussed and a model which advocates both political and technological change is proposed. (SM)

Computer-Based Resource Accounting Model for Automobile Technology Impact Assessment

DOT National Transportation Integrated Search

1976-10-01

A computer-implemented resource accounting model has been developed for assessing resource impacts of future automobile technology options. The resources tracked are materials, energy, capital, and labor. The model has been used in support of the Int...

Model Driven Engineering with Ontology Technologies

NASA Astrophysics Data System (ADS)

Staab, Steffen; Walter, Tobias; Gröner, Gerd; Parreiras, Fernando Silva

Ontologies constitute formal models of some aspect of the world that may be used for drawing interesting logical conclusions even for large models. Software models capture relevant characteristics of a software artifact to be developed, yet, most often these software models have limited formal semantics, or the underlying (often graphical) software language varies from case to case in a way that makes it hard if not impossible to fix its semantics. In this contribution, we survey the use of ontology technologies for software modeling in order to carry over advantages from ontology technologies to the software modeling domain. It will turn out that ontology-based metamodels constitute a core means for exploiting expressive ontology reasoning in the software modeling domain while remaining flexible enough to accommodate varying needs of software modelers.

Factors of adoption of mobile information technology by homecare nurses: a technology acceptance model 2 approach.

PubMed

Zhang, Huiying; Cocosila, Mihail; Archer, Norm

2010-01-01

Pervasive healthcare support through mobile information technology solutions is playing an increasing role in the attempt to improve healthcare and reduce costs. Despite the apparent attractiveness, many mobile applications have failed or have not been implemented as predicted. Among factors possibly leading to such outcomes, technology adoption is a key problem. This must be investigated early in the development process because healthcare is a particularly sensitive area with vital social implications. Moreover, it is important to investigate technology acceptance using the support of scientific tools validated for relevant information systems research. This article presents an empirical study based on the Technology Acceptance Model 2 in mobile homecare nursing. The study elicited the perceptions of 91 Canadian nurses who used personal digital assistants for 1 month in their daily activities. A partial least squares modeling data analysis revealed that nurse's perception of usefulness is the main factor in the adoption of mobile technology, having subjective norm and image within the organization as significant antecedents. Overall, this study was the first attempt at investigating scientifically, through a pertinent information systems research model, user adoption of mobile systems by homecare nursing personnel.

Technologies for Future Precision Strike Missile Systems (les Technologies des futurs systemes de missiles pour frappe de precision)

DTIC Science & Technology

2001-07-01

hardware - in - loop (HWL) simulation is also developed...Firings / Engine Tests Structure Test Hardware In - Loop Simulation Subsystem Test Lab Tests Seeker Actuators Sensors Electronics Propulsion Model Aero Model...Structure Test Hardware In - Loop Simulation Subsystem Test Lab Tests Seeker Actuators Sensors Electronics Propulsion Model Aero Model Model

Study of abrasive resistance of foundries models obtained with use of additive technology

NASA Astrophysics Data System (ADS)

Ol'khovik, Evgeniy

2017-10-01

A problem of determination of resistance of the foundry models and patterns from ABS (PLA) plastic, obtained by the method of 3D printing with using FDM additive technology, to abrasive wear and resistance in the environment of foundry sand mould is considered in the present study. The description of a technique and equipment for tests of castings models and patterns for wear is provided in the article. The manufacturing techniques of models with the use of the 3D printer (additive technology) are described. The scheme with vibration load was applied to samples tests. For the most qualitative research of influence of sandy mix on plastic, models in real conditions of abrasive wear have been organized. The results also examined the application of acrylic paintwork to the plastic model and a two-component coating. The practical offers and recommendation on production of master models with the use of FDM technology allowing one to reach indicators of durability, exceeding 2000 cycles of moulding in foundry sand mix, are described.

The impact of changing technology on the demand for air transportation

NASA Technical Reports Server (NTRS)

Kneafsey, J. T.; Taneja, N. K.

1978-01-01

Demand models for air transportation that are sensitive to the impact of changing technology were developed. The models are responsive to potential changes in technology, and to changing economic, social, and political factors as well. In addition to anticipating the wide differences in the factors influencing the demand for long haul and short haul air travel, the models were designed to clearly distinguish among the unique features of these markets.

Integrating technology readiness into the expectation-confirmation model: an empirical study of mobile services.

PubMed

Chen, Shih-Chih; Liu, Ming-Ling; Lin, Chieh-Peng

2013-08-01

The aim of this study was to integrate technology readiness into the expectation-confirmation model (ECM) for explaining individuals' continuance of mobile data service usage. After reviewing the ECM and technology readiness, an integrated model was demonstrated via empirical data. Compared with the original ECM, the findings of this study show that the integrated model may offer an ameliorated way to clarify what factors and how they influence the continuous intention toward mobile services. Finally, the major findings are summarized, and future research directions are suggested.

Technology Investments in the NASA Entry Systems Modeling Project

NASA Technical Reports Server (NTRS)

Barnhardt, Michael; Wright, Michael; Hughes, Monica

2017-01-01

The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game Changing Development (GCD) Program, is engaged in maturation of fundamental research developing aerosciences, materials, and integrated systems products for entry, descent, and landing(EDL)technologies [1]. To date, the ESM project has published over 200 papers in these areas, comprising the bulk of NASAs research program for EDL modeling. This presentation will provide an overview of the projects successes and challenges, and an assessment of future investments in EDL modeling and simulation relevant to NASAs mission

An object-oriented, technology-adaptive information model

NASA Technical Reports Server (NTRS)

Anyiwo, Joshua C.

1995-01-01

The primary objective was to develop a computer information system for effectively presenting NASA's technologies to American industries, for appropriate commercialization. To this end a comprehensive information management model, applicable to a wide variety of situations, and immune to computer software/hardware technological gyrations, was developed. The model consists of four main elements: a DATA_STORE, a data PRODUCER/UPDATER_CLIENT and a data PRESENTATION_CLIENT, anchored to a central object-oriented SERVER engine. This server engine facilitates exchanges among the other model elements and safeguards the integrity of the DATA_STORE element. It is designed to support new technologies, as they become available, such as Object Linking and Embedding (OLE), on-demand audio-video data streaming with compression (such as is required for video conferencing), Worldwide Web (WWW) and other information services and browsing, fax-back data requests, presentation of information on CD-ROM, and regular in-house database management, regardless of the data model in place. The four components of this information model interact through a system of intelligent message agents which are customized to specific information exchange needs. This model is at the leading edge of modern information management models. It is independent of technological changes and can be implemented in a variety of ways to meet the specific needs of any communications situation. This summer a partial implementation of the model has been achieved. The structure of the DATA_STORE has been fully specified and successfully tested using Microsoft's FoxPro 2.6 database management system. Data PRODUCER/UPDATER and PRESENTATION architectures have been developed and also successfully implemented in FoxPro; and work has started on a full implementation of the SERVER engine. The model has also been successfully applied to a CD-ROM presentation of NASA's technologies in support of Langley Research Center's TAG efforts.

Timing is everything :

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kobos, Peter Holmes; Walker, La Tonya Nicole; Malczynski, Leonard A.

People save for retirement throughout their career because it is virtually impossible to save all youll need in retirement the year before you retire. Similarly, without installing incremental amounts of clean fossil, renewable or transformative energy technologies throughout the coming decades, a radical and immediate change will be near impossible the year before a policy goal is set to be in place. Therefore, our research question is, To meet our desired technical and policy goals, what are the factors that affect the rate we must install technology to achieve these goals in the coming decades? Existing models do not includemore » full regulatory constraints due to their often complex, and inflexible approaches to solve for optimal engineering instead of robust and multidisciplinary solutions. This project outlines the theory and then develops an applied software tool to model the laboratory-to-market transition using the traditional technology readiness level (TRL) framework, but develops subsequent and a novel regulatory readiness level (RRL) and market readiness level (MRL). This tool uses the ideally-suited system dynamics framework to incorporate feedbacks and time delays. Future energy-economic-environment models, regardless of their programming platform, may adapt this software model component framework or module to further vet the likelihood of new or innovative technology moving through the laboratory, regulatory and market space. The prototype analytical framework and tool, called the Technology, Regulatory and Market Readiness Level simulation model (TRMsim) illustrates the interaction between technology research, application, policy and market dynamics as they relate to a new or innovative technology moving from the theoretical stage to full market deployment. The initial results that illustrate the models capabilities indicate for a hypothetical technology, that increasing the key driver behind each of the TRL, RRL and MRL components individually decreases the time required for the technology to progress through each component by 63, 68 and 64%, respectively. Therefore, under the current working assumptions, to decrease the time it may take for a technology to move from the conceptual stage to full scale market adoption one might consider expending additional effort to secure regulatory approval and reducing the uncertainty of the technologys demand in the marketplace.« less

Public health and valorization of genome-based technologies: a new model

PubMed Central

2011-01-01

Background The success rate of timely translation of genome-based technologies to commercially feasible products/services with applicability in health care systems is significantly low. We identified both industry and scientists neglect health policy aspects when commercializing their technology, more specifically, Public Health Assessment Tools (PHAT) and early on involvement of decision makers through which market authorization and reimbursements are dependent. While Technology Transfer (TT) aims to facilitate translation of ideas into products, Health Technology Assessment, one component of PHAT, for example, facilitates translation of products/processes into healthcare services and eventually comes up with recommendations for decision makers. We aim to propose a new model of valorization to optimize integration of genome-based technologies into the healthcare system. Methods The method used to develop our model is an adapted version of the Fish Trap Model and the Basic Design Cycle. Results We found although different, similarities exist between TT and PHAT. Realizing the potential of being mutually beneficial justified our proposal of their relative parallel initiation. We observed that the Public Health Genomics Wheel should be included in this relative parallel activity to ensure all societal/policy aspects are dealt with preemptively by both stakeholders. On further analysis, we found out this whole process is dependent on the Value of Information. As a result, we present our LAL (Learning Adapting Leveling) model which proposes, based on market demand; TT and PHAT by consultation/bi-lateral communication should advocate for relevant technologies. This can be achieved by public-private partnerships (PPPs). These widely defined PPPs create the innovation network which is a developing, consultative/collaborative-networking platform between TT and PHAT. This network has iterations and requires learning, assimilating and using knowledge developed and is called absorption capacity. We hypothesize that the higher absorption capacity, higher success possibility. Our model however does not address the phasing out of technology although we believe the same model can be used to simultaneously phase out a technology. Conclusions This model proposes to facilitate optimization/decrease the timeframe of integration in healthcare. It also helps industry and researchers to come to a strategic decision at an early stage, about technology being developed thus, saving on resources, hence minimizing failures. PMID:22142533

Evaluation of alternative future energy scenarios for Brazil using an energy mix model

NASA Astrophysics Data System (ADS)

Coelho, Maysa Joppert

The purpose of this study is to model and assess the performance and the emissions impacts of electric energy technologies in Brazil, based on selected economic scenarios, for a time frame of 40 years, taking the year of 1995 as a base year. A Base scenario has been developed, for each of three economic development projections, based upon a sectoral analysis. Data regarding the characteristics of over 300 end-use technologies and 400 energy conversion technologies have been collected. The stand-alone MARKAL technology-based energy-mix model, first developed at Brookhaven National Laboratory, was applied to a base case study and five alternative case studies, for each economic scenario. The alternative case studies are: (1) minimum increase in the thermoelectric contribution to the power production system of 20 percent after 2010; (2) extreme values for crude oil price; (3) minimum increase in the renewable technologies contribution to the power production system of 20 percent after 2010; (4) uncertainty on the cost of future renewable conversion technologies; and (5) model is forced to use the natural gas plants committed to be built in the country. Results such as the distribution of fuel used for power generation, electricity demand across economy sectors, total CO2 emissions from burning fossil fuels for power generation, shadow price (marginal cost) of technologies, and others, are evaluated and compared to the Base scenarios previous established. Among some key findings regarding the Brazilian energy system it may be inferred that: (1) diesel technologies are estimated to be the most cost-effective thermal technology in the country; (2) wind technology is estimated to be the most cost-effective technology to be used when a minimum share of renewables is imposed to the system; and (3) hydroelectric technologies present the highest cost/benefit relation among all conversion technologies considered. These results are subject to the limitations of key input assumptions and key assumptions of modeling framework, and are used as the basis for recommendations regarding energy development priorities for Brazil.

Human factors phase IV : risk analysis tool for new train control technology.

DOT National Transportation Integrated Search

2005-01-31

This report covers the theoretical development of the safety state model for railroad operations. Using data from a train control technology experiment, experimental application of the model is demonstrated. A stochastic model of system behavior is d...

Human factors phase IV : risk analysis tool for new train control technology

DOT National Transportation Integrated Search

2005-01-01

This report covers the theoretical development of the safety state model for railroad operations. Using data from a train control technology experiment, experimental application of the model is demonstrated. A stochastic model of system behavior is d...

Air Force Research Laboratory space technology strategic investment model: analysis and outcomes for warfighter capabilities

NASA Astrophysics Data System (ADS)

Preiss, Bruce; Greene, Lloyd; Kriebel, Jamie; Wasson, Robert

2006-05-01

The Air Force Research Laboratory utilizes a value model as a primary input for space technology planning and budgeting. The Space Sector at AFRL headquarters manages space technology investment across all the geographically disparate technical directorates and ensures that integrated planning is achieved across the space community. The space investment portfolio must ultimately balance near, mid, and far-term investments across all the critical space mission areas. Investment levels and growth areas can always be identified by a typical capability analysis or gap analysis, but the value model approach goes one step deeper and helps identify the potential payoff of technology investments by linking the technology directly to an existing or potential concept. The value of the technology is then viewed from the enabling performance perspective of the concept that ultimately fulfills the Air Force mission. The process of linking space technologies to future concepts and technology roadmaps will be reviewed in this paper, along with representative results from this planning cycle. The initial assumptions in this process will be identified along with the strengths and weaknesses of this planning methodology.

Innovative quantum technologies for microgravity fundamental physics and biological research

NASA Technical Reports Server (NTRS)

Kierk, I. K.

2002-01-01

This paper presents a new technology program, within the fundamental physics, focusing on four quantum technology areas: quantum atomics, quantum optics, space superconductivity and quantum sensor technology, and quantum field based sensor and modeling technology.

Application of Interface Technology in Nonlinear Analysis of a Stitched/RFI Composite Wing Stub Box

NASA Technical Reports Server (NTRS)

Wang, John T.; Ransom, Jonathan B.

1997-01-01

A recently developed interface technology was successfully employed in the geometrically nonlinear analysis of a full-scale stitched/RFI composite wing box loaded in bending. The technology allows mismatched finite element models to be joined in a variationally consistent manner and reduces the modeling complexity by eliminating transition meshing. In the analysis, local finite element models of nonlinearly deformed wide bays of the wing box are refined without the need for transition meshing to the surrounding coarse mesh. The COMET-AR finite element code, which has the interface technology capability, was used to perform the analyses. The COMET-AR analysis is compared to both a NASTRAN analysis and to experimental data. The interface technology solution is shown to be in good agreement with both. The viability of interface technology for coupled global/local analysis of large scale aircraft structures is demonstrated.

Slow Dynamics Model of Compressed Air Energy Storage and Battery Storage Technologies for Automatic Generation Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krishnan, Venkat; Das, Trishna

Increasing variable generation penetration and the consequent increase in short-term variability makes energy storage technologies look attractive, especially in the ancillary market for providing frequency regulation services. This paper presents slow dynamics model for compressed air energy storage and battery storage technologies that can be used in automatic generation control studies to assess the system frequency response and quantify the benefits from storage technologies in providing regulation service. The paper also represents the slow dynamics model of the power system integrated with storage technologies in a complete state space form. The storage technologies have been integrated to the IEEE 24more » bus system with single area, and a comparative study of various solution strategies including transmission enhancement and combustion turbine have been performed in terms of generation cycling and frequency response performance metrics.« less

Mobile-Based Dictionary of Information and Communication Technology

NASA Astrophysics Data System (ADS)

Liando, O. E. S.; Mewengkang, A.; Kaseger, D.; Sangkop, F. I.; Rantung, V. P.; Rorimpandey, G. C.

2018-02-01

This study aims to design and build mobile-based dictionary of information and communication technology applications to provide access to information in the form of glossary of terms in the context of information and communication technologies. Applications built in this study using the Android platform, with SQLite database model. This research uses prototype model development method which covers the stages of communication, Quick Plan, Quick Design Modeling, Construction of Prototype, Deployment Delivery & Feedback, and Full System Transformation. The design of this application is designed in such a way as to facilitate the user in the process of learning and understanding the new terms or vocabularies encountered in the world of information and communication technology. Mobile-based dictionary of Information And Communication Technology applications that have been built can be an alternative to learning literature. In its simplest form, this application is able to meet the need for a comprehensive and accurate dictionary of Information And Communication Technology function.

Modeling of Spacecraft Advanced Chemical Propulsion Systems

NASA Technical Reports Server (NTRS)

Benfield, Michael P. J.; Belcher, Jeremy A.

2004-01-01

This paper outlines the development of the Advanced Chemical Propulsion System (ACPS) model for Earth and Space Storable propellants. This model was developed by the System Technology Operation of SAIC-Huntsville for the NASA MSFC In-Space Propulsion Project Office. Each subsystem of the model is described. Selected model results will also be shown to demonstrate the model's ability to evaluate technology changes in chemical propulsion systems.

A Technology Integration Education (TIE) Model: Millennial Preservice Teachers' Motivations about Technological, Pedagogical, and Content Knowledge (TPACK) Competencies

ERIC Educational Resources Information Center

Holland, Denise D.; Piper, Randy T.

2014-01-01

Nobel laureates Schultz (1971) and Becker (1964, 1993) reinvigorated the analysis of education investments. Human capital investments that improve cognitive skills for elementary and secondary students have important economic implications. An interdisciplinary, 12-construct technology integration education (TIE) model was developed. The sample…

Technology Adoption Applied to Educational Settings: Predicting Interventionists' Use of Video-Self Modeling

ERIC Educational Resources Information Center

Heckman, Andrew R.

2010-01-01

Technology provides educators with a significant advantage in working with today's students. One particular application of technology for the purposes of academic and behavioral interventions is the use of video self-modeling (VSM). Although VSM is an evidence-based intervention, it is rarely used in educational settings. The present research…

Designing and Implementing an Integrated Technological Pedagogical Science Knowledge Framework for Science Teachers Professional Development

ERIC Educational Resources Information Center

Jimoyiannis, Athanassios

2010-01-01

This paper reports on the design and the implementation of the Technological Pedagogical Science Knowledge (TPASK), a new model for science teachers professional development built on an integrated framework determined by the Technological Pedagogical Content Knowledge (TPACK) model and the authentic learning approach. The TPASK curriculum…

The Technology Coach: Implementing Instructional Technology in Kean University's ESL Program

ERIC Educational Resources Information Center

Snyder, Sharon C.; Best, Linda; Griffith, Ruth P.; Nelson, Charles

2011-01-01

Faculty involved in implementing a grant to incorporate technology into post-secondary ESL teaching and learning describe the coaching model they used to do this. The authors explain how they drew from principles of literacy coaching to develop and implement their model; describe their experiences in working with coachees; discuss technology…

Effects of Three Typical Resistivity Models on Pulsed Inductive Plasma Acceleration Modeling

NASA Astrophysics Data System (ADS)

Sun, Xin-Feng; Jia, Yan-Hui; Zhang, Tian-Ping; Wu, Chen-Chen; Wen, Xiao-Dong; Guo, Ning; Jin, Hai; Ke, Yu-Jun; Guo, Wei-Long

2017-12-01

Not Available Supported by the Fund of Science and Technology on Vacuum Technology and Physics Laboratory of Lanzhou Institute of Physics under Grant No YSC0715, the National Natural Science Foundation of China under Grant No 62601210, and the Civil Aerospace Technology Research Project under Grant No D010509.

Harnessing the Power of Information Technology: Open Business Models in Higher Education

ERIC Educational Resources Information Center

Sheets, Robert G.; Crawford, Stephen

2012-01-01

Higher education is under enormous pressure to improve outcomes and reduce costs. Information technology can help achieve these goals, but only if it is properly harnessed. This article argues that one key to harnessing information technology is business model innovation that results in more "open" and "unbundled" operations in learning and…

The Chain-Link Fence Model: A Framework for Creating Security Procedures

ERIC Educational Resources Information Center

Houghton, Robert F.

2013-01-01

A long standing problem in information technology security is how to help reduce the security footprint. Many specific proposals exist to address specific problems in information technology security. Most information technology solutions need to be repeatable throughout the course of an information systems lifecycle. The Chain-Link Fence Model is…

Invariance of an Extended Technology Acceptance Model Across Gender and Age Group

ERIC Educational Resources Information Center

Ahmad, Tunku Badariah Tunku; Madarsha, Kamal Basha; Zainuddin, Ahmad Marzuki; Ismail, Nik Ahmad Hisham; Khairani, Ahmad Zamri; Nordin, Mohamad Sahari

2011-01-01

In this study, we examined the likelihood of a TAME (extended technology acceptance model), in which the interrelationships among computer self-efficacy, perceived usefulness, intention to use and self-reported use of computer-mediated technology were tested. In addition, the gender- and age-invariant of its causal structure were evaluated. The…

Improving Technology Acceptance Modeling for Disadvantaged Communities Using a Systems Engineering Approach

ERIC Educational Resources Information Center

Fletcher, Jordan L.

2013-01-01

Developing nations are poised to spend billions on information and communication technology (ICT) innovation in 2020. A study of the historical adoption of ICT in developing nations has indicated that their adoption patterns do not follow typical technology innovation adoption models. This study addressed the weaknesses found in existing…

From PCK to TPACK: Developing a Transformative Model for Pre-Service Science Teachers

ERIC Educational Resources Information Center

Jang, Syh-Jong; Chen, Kuan-Chung

2010-01-01

New science teachers should be equipped with the ability to integrate and design the curriculum and technology for innovative teaching. How to integrate technology into pre-service science teachers' pedagogical content knowledge is the important issue. This study examined the impact on a transformative model of integrating technology and peer…

Teaching Engineering Statistics with Technology, Group Learning, Contextual Projects, Simulation Models and Student Presentations

ERIC Educational Resources Information Center

Romeu, Jorge Luis

2008-01-01

This article discusses our teaching approach in graduate level Engineering Statistics. It is based on the use of modern technology, learning groups, contextual projects, simulation models, and statistical and simulation software to entice student motivation. The use of technology to facilitate group projects and presentations, and to generate,…

Assessing public forecasts to encourage accountability: The case of MIT’s Technology Review

PubMed Central

2017-01-01

Although high degrees of reliability have been found for many types of forecasts purportedly due to the existence of accountability, public forecasts of technology are rarely assessed and continue to have a poor reputation. This paper’s analysis of forecasts made by MIT’s Technology Review provides a rare assessment and thus a means to encourage accountability. It first shows that few of the predicted “breakthrough technologies” currently have large markets. Only four have sales greater than $10 billion while eight technologies not predicted by Technology Review have sales greater than $10 billion including three with greater than $100 billion and one other with greater than $50 billion. Second, possible reasons for these poor forecasts are then discussed including an over emphasis on the science-based process of technology change, sometimes called the linear model of innovation. Third, this paper describes a different model of technology change, one that is widely used by private companies and that explains the emergence of those technologies that have greater than $10 billion in sales. Fourth, technology change and forecasts are discussed in terms of cognitive biases and mental models. PMID:28797114

Investigation of an artificial intelligence technology--Model trees. Novel applications for an immediate release tablet formulation database.

PubMed

Shao, Q; Rowe, R C; York, P

2007-06-01

This study has investigated an artificial intelligence technology - model trees - as a modelling tool applied to an immediate release tablet formulation database. The modelling performance was compared with artificial neural networks that have been well established and widely applied in the pharmaceutical product formulation fields. The predictability of generated models was validated on unseen data and judged by correlation coefficient R(2). Output from the model tree analyses produced multivariate linear equations which predicted tablet tensile strength, disintegration time, and drug dissolution profiles of similar quality to neural network models. However, additional and valuable knowledge hidden in the formulation database was extracted from these equations. It is concluded that, as a transparent technology, model trees are useful tools to formulators.

A predictive model for assistive technology adoption for people with dementia.

PubMed

Zhang, Shuai; McClean, Sally I; Nugent, Chris D; Donnelly, Mark P; Galway, Leo; Scotney, Bryan W; Cleland, Ian

2014-01-01

Assistive technology has the potential to enhance the level of independence of people with dementia, thereby increasing the possibility of supporting home-based care. In general, people with dementia are reluctant to change; therefore, it is important that suitable assistive technologies are selected for them. Consequently, the development of predictive models that are able to determine a person's potential to adopt a particular technology is desirable. In this paper, a predictive adoption model for a mobile phone-based video streaming system, developed for people with dementia, is presented. Taking into consideration characteristics related to a person's ability, living arrangements, and preferences, this paper discusses the development of predictive models, which were based on a number of carefully selected data mining algorithms for classification. For each, the learning on different relevant features for technology adoption has been tested, in conjunction with handling the imbalance of available data for output classes. Given our focus on providing predictive tools that could be used and interpreted by healthcare professionals, models with ease-of-use, intuitive understanding, and clear decision making processes are preferred. Predictive models have, therefore, been evaluated on a multi-criterion basis: in terms of their prediction performance, robustness, bias with regard to two types of errors and usability. Overall, the model derived from incorporating a k-Nearest-Neighbour algorithm using seven features was found to be the optimal classifier of assistive technology adoption for people with dementia (prediction accuracy 0.84 ± 0.0242).

Educators' Percpetions of the Substitution, Augmentation, Modification, Redefinition Model for Technology Integration

ERIC Educational Resources Information Center

Savignano, Mark Angelo

2017-01-01

The Substitution, Augmentation, Modification, Redefinition (SAMR) model has been introduced (Puentedura, 2006) claims that use of technology could predict student outcomes. School districts and educational institutions have been adopting this model in hopes to enhance the educational experience and outcomes for their students (SAMR Model, n.d.).…

The Technological Barriers of Using Video Modeling in the Classroom

ERIC Educational Resources Information Center

Marino, Desha; Myck-Wayne, Janice

2015-01-01

The purpose of this investigation is to identify the technological barriers teachers encounter when attempting to implement video modeling in the classroom. Video modeling is an emerging evidence-based intervention method used with individuals with autism. Research has shown the positive effects video modeling can have on its recipients. Educators…

Status of Hydrodynamic Technology as Related to Model Tests of High- Speed Marine Vehicles

DTIC Science & Technology

1981-07-01

Pennsylvania State University, State College, Pennsylvania, U.S.A. *Bulgarian Ship Hydrodynamics Centre, Varna, Bulgaria Canal de Experiencias Hidrodinamicas...DAVID W. TAYLOR NAVAL SHIP RESEARCH AND DEVELOPMENT CENTER ’h "Bethesda, Maryland 20084 STATUS OF HYDRODYNAMIC TECHNOLOGY AS RELATED TO MODEL TESTS...34Status of Hydrodynamic Technology as related to Model Tests of High Speed Marine Vehicles" documenting the complete findings of the 16th ITTC’s

A practical guide to cardiovascular 3D printing in clinical practice: Overview and examples.

PubMed

Abudayyeh, Islam; Gordon, Brent; Ansari, Mohammad M; Jutzy, Kenneth; Stoletniy, Liset; Hilliard, Anthony

2018-06-01

The advent of more advanced 3D image processing, reconstruction, and a variety of three-dimensional (3D) printing technologies using different materials has made rapid and fairly affordable anatomically accurate models much more achievable. These models show great promise in facilitating procedural and surgical planning for complex congenital and structural heart disease. Refinements in 3D printing technology lend itself to advanced applications in the fields of bio-printing, hemodynamic modeling, and implantable devices. As a novel technology with a large variability in software, processing tools and printing techniques, there is not a standardized method by which a clinician can go from an imaging data-set to a complete model. Furthermore, anatomy of interest and how the model is used can determine the most appropriate technology. In this over-view we discuss, from the standpoint of a clinical professional, image acquisition, processing, and segmentation by which a printable file is created. We then review the various printing technologies, advantages and disadvantages when printing the completed model file, and describe clinical scenarios where 3D printing can be utilized to address therapeutic challenges. © 2017, Wiley Periodicals, Inc.

Integrated process modeling for the laser inertial fusion energy (LIFE) generation system

NASA Astrophysics Data System (ADS)

Meier, W. R.; Anklam, T. M.; Erlandson, A. C.; Miles, R. R.; Simon, A. J.; Sawicki, R.; Storm, E.

2010-08-01

A concept for a new fusion-fission hybrid technology is being developed at Lawrence Livermore National Laboratory. The primary application of this technology is base-load electrical power generation. However, variants of the baseline technology can be used to "burn" spent nuclear fuel from light water reactors or to perform selective transmutation of problematic fission products. The use of a fusion driver allows very high burn-up of the fission fuel, limited only by the radiation resistance of the fuel form and system structures. As a part of this process, integrated process models have been developed to aid in concept definition. Several models have been developed. A cost scaling model allows quick assessment of design changes or technology improvements on cost of electricity. System design models are being used to better understand system interactions and to do design trade-off and optimization studies. Here we describe the different systems models and present systems analysis results. Different market entry strategies are discussed along with potential benefits to US energy security and nuclear waste disposal. Advanced technology options are evaluated and potential benefits from additional R&D targeted at the different options is quantified.

Development of a Multidisciplinary Middle School Mathematics Infusion Model

ERIC Educational Resources Information Center

Russo, Maria; Hecht, Deborah; Burghardt, M. David; Hacker, Michael; Saxman, Laura

2011-01-01

The National Science Foundation (NSF) funded project "Mathematics, Science, and Technology Partnership" (MSTP) developed a multidisciplinary instructional model for connecting mathematics to science, technology and engineering content areas at the middle school level. Specifically, the model infused mathematics into middle school curriculum…

Innovative quantum technologies for microgravity fundamental physics and biological research

NASA Technical Reports Server (NTRS)

Kierk, I.; Israelsson, U.; Lee, M.

2001-01-01

This paper presents a new technology program, within the fundamental physics research program, focusing on four quantum technology areas: quantum atomics, quantum optics, space superconductivity and quantum sensor technology, and quantum fluid based sensor and modeling technology.

Definition of common support equipment and space station interface requirements for IOC model technology experiments

NASA Technical Reports Server (NTRS)

Russell, Richard A.; Waiss, Richard D.

1988-01-01

A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

Advanced technologies for genetically manipulating the silkworm Bombyx mori, a model Lepidopteran insect

PubMed Central

Xu, Hanfu; O'Brochta, David A.

2015-01-01

Genetic technologies based on transposon-mediated transgenesis along with several recently developed genome-editing technologies have become the preferred methods of choice for genetically manipulating many organisms. The silkworm, Bombyx mori, is a Lepidopteran insect of great economic importance because of its use in silk production and because it is a valuable model insect that has greatly enhanced our understanding of the biology of insects, including many agricultural pests. In the past 10 years, great advances have been achieved in the development of genetic technologies in B. mori, including transposon-based technologies that rely on piggyBac-mediated transgenesis and genome-editing technologies that rely on protein- or RNA-guided modification of chromosomes. The successful development and application of these technologies has not only facilitated a better understanding of B. mori and its use as a silk production system, but also provided valuable experiences that have contributed to the development of similar technologies in non-model insects. This review summarizes the technologies currently available for use in B. mori, their application to the study of gene function and their use in genetically modifying B. mori for biotechnology applications. The challenges, solutions and future prospects associated with the development and application of genetic technologies in B. mori are also discussed. PMID:26108630

Income and Technology as Drivers of Australian Healthcare Expenditures.

PubMed

You, Xiaohui; Okunade, Albert A

2017-07-01

The roles of income and technology as the major determinants of aggregate healthcare expenditure (HEXP) continue to interest economists and health policy researchers. Concepts and measures of medical technologies remain complex; however, income (on the demand side) and technology (on the supply side) are important drivers of HEXP. This paper presents analysis of Australia's HEXP, using time-series econometrics modeling techniques applied to 1971-2011 annual aggregate data. Our work fills two important gaps in the literature. First, we model the determinants of Australia's HEXP using the latest and longest available data series. Second, this novel study investigates several alternative technology proxies (input and output measures), including economy-wide research and development expenditures, hospital research expenditures, mortality rate, and two technology indexes based on medical devices. We then apply the residual component method and the technology proxy approach to quantify the technology effects on HEXP. Our empirical results suggest that Australian aggregate healthcare is a normal good and a technical necessity with the income elasticity estimates ranging from 0.51 to 0.97, depending on the model. The estimated technology effects on HEXP falling in the 0.30-0.35 range and mimicking those in the literature using the US data, reinforce the global spread of healthcare technology. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Using information communication technology in models of integrated community-based primary health care: learning from the iCOACH case studies.

PubMed

Steele Gray, Carolyn; Barnsley, Jan; Gagnon, Dominique; Belzile, Louise; Kenealy, Tim; Shaw, James; Sheridan, Nicolette; Wankah Nji, Paul; Wodchis, Walter P

2018-06-26

Information communication technology (ICT) is a critical enabler of integrated models of community-based primary health care; however, little is known about how existing technologies have been used to support new models of integrated care. To address this gap, we draw on data from an international study of integrated models, exploring how ICT is used to support activities of integrated care and the organizational and environmental barriers and enablers to its adoption. We take an embedded comparative multiple-case study approach using data from a study of implementation of nine models of integrated community-based primary health care, the Implementing Integrated Care for Older Adults with Complex Health Needs (iCOACH) study. Six cases from Canada, three each in Ontario and Quebec, and three in New Zealand, were studied. As part of the case studies, interviews were conducted with managers and front-line health care providers from February 2015 to March 2017. A qualitative descriptive approach was used to code data from 137 interviews and generate word tables to guide analysis. Despite different models and contexts, we found strikingly similar accounts of the types of activities supported through ICT systems in each of the cases. ICT systems were used most frequently to support activities like care coordination by inter-professional teams through information sharing. However, providers were limited in their ability to efficiently share patient data due to data access issues across organizational and professional boundaries and due to system functionality limitations, such as a lack of interoperability. Even in innovative models of care, managers and providers in our cases mainly use technology to enable traditional ways of working. Technology limitations prevent more innovative uses of technology that could support disruption necessary to improve care delivery. We argue the barriers to more innovative use of technology are linked to three factors: (1) information access barriers, (2) limited functionality of available technology, and (3) organizational and provider inertia.

Modeling and control of active twist aircraft

NASA Astrophysics Data System (ADS)

Cramer, Nicholas Bryan

The Wright Brothers marked the beginning of powered flight in 1903 using an active twist mechanism as their means of controlling roll. As time passed due to advances in other technologies that transformed aviation the active twist mechanism was no longer used. With the recent advances in material science and manufacturability, the possibility of the practical use of active twist technologies has emerged. In this dissertation, the advantages and disadvantages of active twist techniques are investigated through the development of an aeroelastic modeling method intended for informing the designs of such technologies and wind tunnel testing to confirm the capabilities of the active twist technologies and validate the model. Control principles for the enabling structural technologies are also proposed while the potential gains of dynamic, active twist are analyzed.

Model Development and Experimental Validation of the Fusible Heat Sink Design for Exploration Vehicles

NASA Technical Reports Server (NTRS)

Cognata, Thomas J.; Leimkuehler, Thomas O.; Sheth, Rubik B.; Le,Hung

2012-01-01

The Fusible Heat Sink is a novel vehicle heat rejection technology which combines a flow through radiator with a phase change material. The combined technologies create a multi-function device able to shield crew members against Solar Particle Events (SPE), reduce radiator extent by permitting sizing to the average vehicle heat load rather than to the peak vehicle heat load, and to substantially absorb heat load excursions from the average while constantly maintaining thermal control system setpoints. This multi-function technology provides great flexibility for mission planning, making it possible to operate a vehicle in hot or cold environments and under high or low heat load conditions for extended periods of time. This paper describes the model development and experimental validation of the Fusible Heat Sink technology. The model developed was intended to meet the radiation and heat rejection requirements of a nominal MMSEV mission. Development parameters and results, including sizing and model performance will be discussed. From this flight-sized model, a scaled test-article design was modeled, designed, and fabricated for experimental validation of the technology at Johnson Space Center thermal vacuum chamber facilities. Testing showed performance comparable to the model at nominal loads and the capability to maintain heat loads substantially greater than nominal for extended periods of time.

Model Development and Experimental Validation of the Fusible Heat Sink Design for Exploration Vehicles

NASA Technical Reports Server (NTRS)

Cognata, Thomas J.; Leimkuehler, Thomas; Sheth, Rubik; Le, Hung

2013-01-01

The Fusible Heat Sink is a novel vehicle heat rejection technology which combines a flow through radiator with a phase change material. The combined technologies create a multi-function device able to shield crew members against Solar Particle Events (SPE), reduce radiator extent by permitting sizing to the average vehicle heat load rather than to the peak vehicle heat load, and to substantially absorb heat load excursions from the average while constantly maintaining thermal control system setpoints. This multi-function technology provides great flexibility for mission planning, making it possible to operate a vehicle in hot or cold environments and under high or low heat load conditions for extended periods of time. This paper describes the modeling and experimental validation of the Fusible Heat Sink technology. The model developed was intended to meet the radiation and heat rejection requirements of a nominal MMSEV mission. Development parameters and results, including sizing and model performance will be discussed. From this flight-sized model, a scaled test-article design was modeled, designed, and fabricated for experimental validation of the technology at Johnson Space Center thermal vacuum chamber facilities. Testing showed performance comparable to the model at nominal loads and the capability to maintain heat loads substantially greater than nominal for extended periods of time.

Social organization and the evolution of cumulative technology in apes and hominins.

PubMed

Pradhan, Gauri R; Tennie, Claudio; van Schaik, Carel P

2012-07-01

Culturally supported accumulation (or ratcheting) of technological complexity is widely seen as characterizing hominin technology relative to that of the extant great apes, and thus as representing a threshold in cultural evolution. To explain this divide, we modeled the process of cultural accumulation of technology, which we defined as adding new actions to existing ones to create new functional combinations, based on a model for great ape tool use. The model shows that intraspecific and interspecific variation in the presence of simple and cumulative technology among extant orangutans and chimpanzees is largely due to variation in sociability, and hence opportunities for social learning. The model also suggests that the adoption of extensive allomaternal care (cooperative breeding) in early Pleistocene Homo, which led to an increase in sociability and to teaching, and hence increased efficiency of social learning, was enough to facilitate technological ratcheting. Hence, socioecological changes, rather than advances in cognitive abilities, can account for the cumulative cultural changes seen until the origin of the Acheulean. The consequent increase in the reliance on technology could have served as the pacemaker for increased cognitive abilities. Our results also suggest that a more important watershed in cultural evolution was the rise of donated culture (technology or concepts), in which technology or concepts was transferred to naïve individuals, allowing them to skip many learning steps, and specialization arose, which allowed individuals to learn only a subset of the population's skills. Copyright © 2012 Elsevier Ltd. All rights reserved.

Accelerating the commercialization of university technologies for military healthcare applications: the role of the proof of concept process

NASA Astrophysics Data System (ADS)

Ochoa, Rosibel; DeLong, Hal; Kenyon, Jessica; Wilson, Eli

2011-06-01

The von Liebig Center for Entrepreneurism and Technology Advancement at UC San Diego (vonliebig.ucsd.edu) is focused on accelerating technology transfer and commercialization through programs and education on entrepreneurism. Technology Acceleration Projects (TAPs) that offer pre-venture grants and extensive mentoring on technology commercialization are a key component of its model which has been developed over the past ten years with the support of a grant from the von Liebig Foundation. In 2010, the von Liebig Entrepreneurism Center partnered with the U.S. Army Telemedicine and Advanced Technology Research Center (TATRC), to develop a regional model of Technology Acceleration Program initially focused on military research to be deployed across the nation to increase awareness of military medical needs and to accelerate the commercialization of novel technologies to treat the patient. Participants to these challenges are multi-disciplinary teams of graduate students and faculty in engineering, medicine and business representing universities and research institutes in a region, selected via a competitive process, who receive commercialization assistance and funding grants to support translation of their research discoveries into products or services. To validate this model, a pilot program focused on commercialization of wireless healthcare technologies targeting campuses in Southern California has been conducted with the additional support of Qualcomm, Inc. Three projects representing three different universities in Southern California were selected out of forty five applications from ten different universities and research institutes. Over the next twelve months, these teams will conduct proof of concept studies, technology development and preliminary market research to determine the commercial feasibility of their technologies. This first regional program will help build the needed tools and processes to adapt and replicate this model across other regions in the Country.

Documenting Differences between Early Stone Age Flake Production Systems: An Experimental Model and Archaeological Verification.

PubMed

Presnyakova, Darya; Archer, Will; Braun, David R; Flear, Wesley

2015-01-01

This study investigates morphological differences between flakes produced via "core and flake" technologies and those resulting from bifacial shaping strategies. We investigate systematic variation between two technological groups of flakes using experimentally produced assemblages, and then apply the experimental model to the Cutting 10 Mid -Pleistocene archaeological collection from Elandsfontein, South Africa. We argue that a specific set of independent variables--and their interactions--including external platform angle, platform depth, measures of thickness variance and flake curvature should distinguish between these two technological groups. The role of these variables in technological group separation was further investigated using the Generalized Linear Model as well as Linear Discriminant Analysis. The Discriminant model was used to classify archaeological flakes from the Cutting 10 locality in terms of their probability of association, within either experimentally developed technological group. The results indicate that the selected independent variables play a central role in separating core and flake from bifacial technologies. Thickness evenness and curvature had the greatest effect sizes in both the Generalized Linear and Discriminant models. Interestingly the interaction between thickness evenness and platform depth was significant and played an important role in influencing technological group membership. The identified interaction emphasizes the complexity in attempting to distinguish flake production strategies based on flake morphological attributes. The results of the discriminant function analysis demonstrate that the majority of flakes at the Cutting 10 locality were not associated with the production of the numerous Large Cutting Tools found at the site, which corresponds with previous suggestions regarding technological behaviors reflected in this assemblage.

Documenting Differences between Early Stone Age Flake Production Systems: An Experimental Model and Archaeological Verification

PubMed Central

Presnyakova, Darya; Archer, Will; Braun, David R.; Flear, Wesley

2015-01-01

This study investigates morphological differences between flakes produced via “core and flake” technologies and those resulting from bifacial shaping strategies. We investigate systematic variation between two technological groups of flakes using experimentally produced assemblages, and then apply the experimental model to the Cutting 10 Mid -Pleistocene archaeological collection from Elandsfontein, South Africa. We argue that a specific set of independent variables—and their interactions—including external platform angle, platform depth, measures of thickness variance and flake curvature should distinguish between these two technological groups. The role of these variables in technological group separation was further investigated using the Generalized Linear Model as well as Linear Discriminant Analysis. The Discriminant model was used to classify archaeological flakes from the Cutting 10 locality in terms of their probability of association, within either experimentally developed technological group. The results indicate that the selected independent variables play a central role in separating core and flake from bifacial technologies. Thickness evenness and curvature had the greatest effect sizes in both the Generalized Linear and Discriminant models. Interestingly the interaction between thickness evenness and platform depth was significant and played an important role in influencing technological group membership. The identified interaction emphasizes the complexity in attempting to distinguish flake production strategies based on flake morphological attributes. The results of the discriminant function analysis demonstrate that the majority of flakes at the Cutting 10 locality were not associated with the production of the numerous Large Cutting Tools found at the site, which corresponds with previous suggestions regarding technological behaviors reflected in this assemblage. PMID:26111251

a Review of Digital Watermarking and Copyright Control Technology for Cultural Relics

NASA Astrophysics Data System (ADS)

Liu, H.; Hou, M.; Hu, Y.

2018-04-01

With the rapid growth of the application and sharing of the 3-D model data in the protection of cultural relics, the problem of Shared security and copyright control of the three-dimensional model of cultural relics is becoming increasingly prominent. Followed by a digital watermarking copyright control has become the frontier technology of 3-D model security protection of cultural relics and effective means, related technology research and application in recent years also got further development. 3-D model based on cultural relics digital watermarking and copyright control technology, introduces the research background and demand, its unique characteristics were described, and its development and application of the algorithm are discussed, and the prospects of the future development trend and some problems and the solution.

Towards a new generation of agricultural system data, models and knowledge products: Information and communication technology.

PubMed

Janssen, Sander J C; Porter, Cheryl H; Moore, Andrew D; Athanasiadis, Ioannis N; Foster, Ian; Jones, James W; Antle, John M

2017-07-01

Agricultural modeling has long suffered from fragmentation in model implementation. Many models are developed, there is much redundancy, models are often poorly coupled, model component re-use is rare, and it is frequently difficult to apply models to generate real solutions for the agricultural sector. To improve this situation, we argue that an open, self-sustained, and committed community is required to co-develop agricultural models and associated data and tools as a common resource. Such a community can benefit from recent developments in information and communications technology (ICT). We examine how such developments can be leveraged to design and implement the next generation of data, models, and decision support tools for agricultural production systems. Our objective is to assess relevant technologies for their maturity, expected development, and potential to benefit the agricultural modeling community. The technologies considered encompass methods for collaborative development and for involving stakeholders and users in development in a transdisciplinary manner. Our qualitative evaluation suggests that as an overall research challenge, the interoperability of data sources, modular granular open models, reference data sets for applications and specific user requirements analysis methodologies need to be addressed to allow agricultural modeling to enter in the big data era. This will enable much higher analytical capacities and the integrated use of new data sources. Overall agricultural systems modeling needs to rapidly adopt and absorb state-of-the-art data and ICT technologies with a focus on the needs of beneficiaries and on facilitating those who develop applications of their models. This adoption requires the widespread uptake of a set of best practices as standard operating procedures.

Assisted-living spaces for end-users with complex needs: a proposed implementation and delivery model.

PubMed

Linskell, Jeremy; Bouamrane, Matt-Mouley

2012-09-01

An assisted living space (ALS) is a technology-enabled environment designed to allow people with complex health or social care needs to remain, and live independently, in their own home for longer. However, many challenges remain in order to deliver usable systems acceptable to a diverse range of stakeholders, including end-users, and their families and carers, as well as health and social care services. ALSs need to support activities of daily-living while allowing end-users to maintain important social connections. They must be dynamic, flexible and adaptable living environments. In this article, we provide an overview of the technological landscape of assisted-living technology (ALT) and recent policies to promote an increased adoption of ALT in Scotland. We discuss our experiences in implementing technology-supported ALSs and emphasise key lessons. Finally, we propose an iterative and pragmatic user-centred implementation model for delivering ALSs in complex-needs scenarios. This empirical model is derived from our past ALS implementations. The proposed model allows project stakeholders to identify requirements, allocate tasks and responsibilities, and identify appropriate technological solutions for the delivery of functional ALS systems. The model is generic and makes no assumptions on needs or technology solutions, nor on the technical knowledge, skills and experience of the stakeholders involved in the ALS design process.

Comparative Effectiveness of a Technology-Facilitated Depression Care Management Model in Safety-Net Primary Care Patients With Type 2 Diabetes: 6-Month Outcomes of a Large Clinical Trial.

PubMed

Wu, Shinyi; Ell, Kathleen; Jin, Haomiao; Vidyanti, Irene; Chou, Chih-Ping; Lee, Pey-Jiuan; Gross-Schulman, Sandra; Sklaroff, Laura Myerchin; Belson, David; Nezu, Arthur M; Hay, Joel; Wang, Chien-Ju; Scheib, Geoffrey; Di Capua, Paul; Hawkins, Caitlin; Liu, Pai; Ramirez, Magaly; Wu, Brian W; Richman, Mark; Myers, Caitlin; Agustines, Davin; Dasher, Robert; Kopelowicz, Alex; Allevato, Joseph; Roybal, Mike; Ipp, Eli; Haider, Uzma; Graham, Sharon; Mahabadi, Vahid; Guterman, Jeffrey

2018-04-23

Comorbid depression is a significant challenge for safety-net primary care systems. Team-based collaborative depression care is effective, but complex system factors in safety-net organizations impede adoption and result in persistent disparities in outcomes. Diabetes-Depression Care-management Adoption Trial (DCAT) evaluated whether depression care could be significantly improved by harnessing information and communication technologies to automate routine screening and monitoring of patient symptoms and treatment adherence and allow timely communication with providers. The aim of this study was to compare 6-month outcomes of a technology-facilitated care model with a usual care model and a supported care model that involved team-based collaborative depression care for safety-net primary care adult patients with type 2 diabetes. DCAT is a translational study in collaboration with Los Angeles County Department of Health Services, the second largest safety-net care system in the United States. A comparative effectiveness study with quasi-experimental design was conducted in three groups of adult patients with type 2 diabetes to compare three delivery models: usual care, supported care, and technology-facilitated care. Six-month outcomes included depression and diabetes care measures and patient-reported outcomes. Comparative treatment effects were estimated by linear or logistic regression models that used generalized propensity scores to adjust for sampling bias inherent in the nonrandomized design. DCAT enrolled 1406 patients (484 in usual care, 480 in supported care, and 442 in technology-facilitated care), most of whom were Hispanic or Latino and female. Compared with usual care, both the supported care and technology-facilitated care groups were associated with significant reduction in depressive symptoms measured by scores on the 9-item Patient Health Questionnaire (least squares estimate, LSE: usual care=6.35, supported care=5.05, technology-facilitated care=5.16; P value: supported care vs usual care=.02, technology-facilitated care vs usual care=.02); decreased prevalence of major depression (odds ratio, OR: supported care vs usual care=0.45, technology-facilitated care vs usual care=0.33; P value: supported care vs usual care=.02, technology-facilitated care vs usual care=.007); and reduced functional disability as measured by Sheehan Disability Scale scores (LSE: usual care=3.21, supported care=2.61, technology-facilitated care=2.59; P value: supported care vs usual care=.04, technology-facilitated care vs usual care=.03). Technology-facilitated care was significantly associated with depression remission (technology-facilitated care vs usual care: OR=2.98, P=.04); increased satisfaction with care for emotional problems among depressed patients (LSE: usual care=3.20, technology-facilitated care=3.70; P=.05); reduced total cholesterol level (LSE: usual care=176.40, technology-facilitated care=160.46; P=.01); improved satisfaction with diabetes care (LSE: usual care=4.01, technology-facilitated care=4.20; P=.05); and increased odds of taking an glycated hemoglobin test (technology-facilitated care vs usual care: OR=3.40, P<.001). Both the technology-facilitated care and supported care delivery models showed potential to improve 6-month depression and functional disability outcomes. The technology-facilitated care model has a greater likelihood to improve depression remission, patient satisfaction, and diabetes care quality. ©Shinyi Wu, Kathleen Ell, Haomiao Jin, Irene Vidyanti, Chih-Ping Chou, Pey-Jiuan Lee, Sandra Gross-Schulman, Laura Myerchin Sklaroff, David Belson, Arthur M Nezu, Joel Hay, Chien-Ju Wang, Geoffrey Scheib, Paul Di Capua, Caitlin Hawkins, Pai Liu, Magaly Ramirez, Brian W Wu, Mark Richman, Caitlin Myers, Davin Agustines, Robert Dasher, Alex Kopelowicz, Joseph Allevato, Mike Roybal, Eli Ipp, Uzma Haider, Sharon Graham, Vahid Mahabadi, Jeffrey Guterman. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 23.04.2018.

Consulting Basics for the Teacher-Turned-Technology Consultant.

ERIC Educational Resources Information Center

Stager, Sue; Green, Kathy

1988-01-01

Discusses the role of educational technology consultants who may be classroom teachers with no formal training in consulting. Consulting models are described, including content-oriented and process-oriented approaches; Schein's process facilitator model is examined; and Kurpius' consulting model is explained and expanded. (LRW)

Evaluating the Usability of a Professional Modeling Tool Repurposed for Middle School Learning

NASA Astrophysics Data System (ADS)

Peters, Vanessa L.; Songer, Nancy Butler

2013-10-01

This paper reports the results of a three-stage usability test of a modeling tool designed to support learners' deep understanding of the impacts of climate change on ecosystems. The design process involved repurposing an existing modeling technology used by professional scientists into a learning tool specifically designed for middle school students. To evaluate usability, we analyzed students' task performance and task completion time as they worked on an activity with the repurposed modeling technology. In stage 1, we conducted remote testing of an early modeling prototype with urban middle school students (n = 84). In stages 2 and 3, we used screencasting software to record students' mouse and keyboard movements during collaborative think-alouds (n = 22) and conducted a qualitative analysis of their peer discussions. Taken together, the study findings revealed two kinds of usability issues that interfered with students' productive use of the tool: issues related to the use of data and information, and issues related to the use of the modeling technology. The study findings resulted in design improvements that led to stronger usability outcomes and higher task performance among students. In this paper, we describe our methods for usability testing, our research findings, and our design solutions for supporting students' use of the modeling technology and use of data. The paper concludes with implications for the design and study of modeling technologies for science learning.

What's the Technology For? Teacher Attention and Pedagogical Goals in a Modeling-Focused Professional Development Workshop

NASA Astrophysics Data System (ADS)

Wilkerson, Michelle Hoda; Andrews, Chelsea; Shaban, Yara; Laina, Vasiliki; Gravel, Brian E.

2016-02-01

This paper explores the role that technology can play in engaging pre-service teachers with the iterative, "messy" nature of model-based inquiry. Over the course of 5 weeks, 11 pre-service teachers worked in groups to construct models of diffusion using a computational animation and simulation toolkit, and designed lesson plans for the toolkit. Content analyses of group discussions and lesson plans document attention to content, representation, revision, and evaluation as interwoven aspects of modeling over the course of the workshop. When animating, only content and representation were heavily represented in group discussions. When simulating, all four aspects were represented to different extents across groups. Those differences corresponded with different planned uses for the technology during lessons: to teach modeling, to engage learners with one another's ideas, or to reveal student ideas. We identify specific ways in which technology served an important role in eliciting teachers' knowledge and goals related to scientific modeling in the classroom.

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement. Part 2; Structural Analysis Technologies and Modeling Practices

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Nemeth, Michael P.; Hilburger, Mark W.

2004-01-01

A technology review and assessment of modeling and analysis efforts underway in support of a safe return to flight of the thermal protection system (TPS) for the Space Shuttle external tank (ET) are summarized. This review and assessment effort focuses on the structural modeling and analysis practices employed for ET TPS foam design and analysis and on identifying analysis capabilities needed in the short-term and long-term. The current understanding of the relationship between complex flight environments and ET TPS foam failure modes are reviewed as they relate to modeling and analysis. A literature review on modeling and analysis of TPS foam material systems is also presented. Finally, a review of modeling and analysis tools employed in the Space Shuttle Program is presented for the ET TPS acreage and close-out foam regions. This review includes existing simplified engineering analysis tools are well as finite element analysis procedures.

A technology path to tactical agent-based modeling

NASA Astrophysics Data System (ADS)

James, Alex; Hanratty, Timothy P.

2017-05-01

Wargaming is a process of thinking through and visualizing events that could occur during a possible course of action. Over the past 200 years, wargaming has matured into a set of formalized processes. One area of growing interest is the application of agent-based modeling. Agent-based modeling and its additional supporting technologies has potential to introduce a third-generation wargaming capability to the Army, creating a positive overmatch decision-making capability. In its simplest form, agent-based modeling is a computational technique that helps the modeler understand and simulate how the "whole of a system" responds to change over time. It provides a decentralized method of looking at situations where individual agents are instantiated within an environment, interact with each other, and empowered to make their own decisions. However, this technology is not without its own risks and limitations. This paper explores a technology roadmap, identifying research topics that could realize agent-based modeling within a tactical wargaming context.

Preservice Teachers' Intention to Adopt Technology in Their Future Classrooms

ERIC Educational Resources Information Center

Li, Kun; Li, Yanju; Franklin, Teresa

2016-01-01

This study examined four factors that influence preservice teachers' intentions to adopt technology in classrooms based on the Theory of Planned Behavior and Technology Acceptance Model. These four factors--technology self-efficacy, attitudes toward technology, perceived ease of use of technology, and perceived barriers of technology…

Patterns of Innovation in Alzheimer's Disease Drug Development: A Strategic Assessment Based on Technological Maturity.

PubMed

Beierlein, Jennifer M; McNamee, Laura M; Walsh, Michael J; Ledley, Fred D

2015-08-01

This article examines the current status of translational science for Alzheimer's disease (AD) drug discovery by using an analytical model of technology maturation. Previous studies using this model have demonstrated that nascent scientific insights and inventions generate few successful leads or new products until achieving a requisite level of maturity. This article assessed whether recent failures and successes in AD research follow patterns of innovation observed in other sectors. The bibliometric-based Technology Innovation Maturation Evaluation model was used to quantify the characteristic S-curve of growth for AD-related technologies, including acetylcholinesterase, N-methyl-d-aspartate (NMDA) receptors, B-amyloid, amyloid precursor protein, presenilin, amyloid precursor protein secretases, apolipoprotein E4, and transactive response DNA binding protein 43 kDa (TDP-43). This model quantifies the accumulation of knowledge as a metric for technological maturity, and it identifies the point of initiation of an exponential growth stage and the point at which growth slows as the technology is established. In contrast to the long-established acetylcholinesterase and NMDA receptor technologies, we found that amyloid-related technologies reached the established point only after 2000, and that the more recent technologies (eg, TDP-43) have not yet approached this point. The first approvals for new molecular entities targeting acetylcholinesterase and the NMDA receptor occurred an average of 22 years after the respective technologies were established, with only memantine (which was phenotypically discovered) entering clinical trials before this point. In contrast, the 6 lead compounds targeting the formation of amyloid plaques that failed in Phase III trials between 2009 and 2014 all entered clinical trials before the respective target technologies were established. This analysis suggests that AD drug discovery has followed a predictable pattern of innovation in which technological maturity is an important determinant of success in development. Quantitative analysis indicates that the lag in emergence of new products, and the much-heralded clinical failures of recent years, should be viewed in the context of the ongoing maturation of AD-related technologies. Although these technologies were not sufficiently mature to generate successful products a decade ago, they may be now. Analytical models of translational science can inform basic and clinical research results as well as strategic development of new therapeutic products. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

The Aviation System Analysis Capability Air Carrier Cost-Benefit Model

NASA Technical Reports Server (NTRS)

Gaier, Eric M.; Edlich, Alexander; Santmire, Tara S.; Wingrove, Earl R.., III

1999-01-01

To meet its objective of assisting the U.S. aviation industry with the technological challenges of the future, NASA must identify research areas that have the greatest potential for improving the operation of the air transportation system. Therefore, NASA is developing the ability to evaluate the potential impact of various advanced technologies. By thoroughly understanding the economic impact of advanced aviation technologies and by evaluating how the new technologies will be used in the integrated aviation system, NASA aims to balance its aeronautical research program and help speed the introduction of high-leverage technologies. To meet these objectives, NASA is building the Aviation System Analysis Capability (ASAC). NASA envisions ASAC primarily as a process for understanding and evaluating the impact of advanced aviation technologies on the U.S. economy. ASAC consists of a diverse collection of models and databases used by analysts and other individuals from the public and private sectors brought together to work on issues of common interest to organizations in the aviation community. ASAC also will be a resource available to the aviation community to analyze; inform; and assist scientists, engineers, analysts, and program managers in their daily work. The ASAC differs from previous NASA modeling efforts in that the economic behavior of buyers and sellers in the air transportation and aviation industries is central to its conception. Commercial air carriers, in particular, are an important stakeholder in this community. Therefore, to fully evaluate the implications of advanced aviation technologies, ASAC requires a flexible financial analysis tool that credibly links the technology of flight with the financial performance of commercial air carriers. By linking technical and financial information, NASA ensures that its technology programs will continue to benefit the user community. In addition, the analysis tool must be capable of being incorporated into the wide-ranging suite of economic and technical models that comprise ASAC. This report describes an Air Carrier Cost-Benefit Model (CBM) that meets these requirements. The ASAC CBM is distinguished from many of the aviation cost-benefit models by its exclusive focus on commercial air carriers. The model considers such benefit categories as time and fuel savings, utilization opportunities, reliability and capacity enhancements, and safety and security improvements. The model distinguishes between benefits that are predictable and those that occur randomly. By making such a distinction, the model captures the ability of air carriers to reoptimize scheduling and crew assignments for predictable benefits. In addition, the model incorporates a life-cycle cost module for new technology, which applies the costs of nonrecurring acquisitions, recurring maintenance and operation, and training to each aircraft equipment type independently.

Technological Adoption and Organizational Adaptation: Developing a Model for Human Resource Management in an International Business Environment.

ERIC Educational Resources Information Center

Gattiker, Urs E.

A model of technological training has two dimensions: level of cultural stability and employee's level of cognitive ability. Each dimension has two variables. The variables of cultural stability are (1) technological adoption and organizational adaptation and (2) structure of work and work processes. For cognitive ability, the variables are…

The Effects of Role Modeling on Technology Integration within Physical Education Teacher Education

ERIC Educational Resources Information Center

Baert, Helena

2014-01-01

The national standards for physical education teacher education (PETE) in the US state that teacher candidates should be able to plan and implement technology infused lessons that meet lesson objectives and enhance learning in physical education (standard 3.7). Research shows that role modeling of technology integration can have a positive impact…

A Technological Pedagogical Content Knowledge Based Instructional Design Model: A Third Version Implementation Study in a Technology Integration Course

ERIC Educational Resources Information Center

Lee, Chia-Jung; Kim, ChanMin

2017-01-01

This paper presents the third version of a technological pedagogical content knowledge (TPACK) based instructional design model that incorporates the distinctive, transformative, and integrative views of TPACK into a comprehensive actionable framework. Strategies of relating TPACK domains to real-life learning experiences, role-playing, and…

Optimizing technology investments: a broad mission model approach

NASA Technical Reports Server (NTRS)

Shishko, R.

2003-01-01

A long-standing problem in NASA is how to allocate scarce technology development resources across advanced technologies in order to best support a large set of future potential missions. Within NASA, two orthogonal paradigms have received attention in recent years: the real-options approach and the broad mission model approach. This paper focuses on the latter.

Application of Strategic Institutional-Information Technology Alignment Model in Four-Year Institutions of Higher Education

ERIC Educational Resources Information Center

Lach-Smith, Barbara

2010-01-01

This study examined an existing corporate model of business-information technology alignment for application in higher education and tested the findings by surveying executive and technology leaders in higher education. The purpose of this study was to gain a better understanding of the factors that impact alignment between institutional strategic…

Factors of Online Learning Adoption: A Comparative Juxtaposition of the Theory of Planned Behaviour and the Technology Acceptance Model

ERIC Educational Resources Information Center

Ndubisi, Nelson

2006-01-01

Organisational investments in information technologies have increased significantly in the past few decades. All around the globe and in Malaysia particularly, a number of educational institutions are experimenting with e-learning. Adopting the theory of planned behaviour (TPB) and the technology acceptance model (TAM) this article tries to…

Jordanian Pre-Service Teachers' and Technology Integration: A Human Resource Development Approach

ERIC Educational Resources Information Center

Al-Ruz, Jamal Abu; Khasawneh, Samer

2011-01-01

The purpose of this study was to test a model in which technology integration of pre-service teachers was predicted by a number of university-based and school-based factors. Initially, factors affecting technology integration were identified, and a research-based path model was developed to explain causal relationships between these factors. The…

An Innovative Dialogue about College Drinking: Developing an Immediate Response Technology Model for Health Promotion

ERIC Educational Resources Information Center

LeGreco, Marianne; Hess, Aaron; Lederman, Linda C.; Schuwerk, Tara; LaValley, Angela G.

2010-01-01

New communication technologies, including personal response "clickers," have become increasingly popular across college campuses as a way to promote a wide range of practices. This paper calls attention to the need for communication models that account for the usefulness of these new technologies, especially as they relate to health promotion,…

Empirical Modeling of Information Communication Technology Usage Behaviour among Business Education Teachers in Tertiary Colleges of a Developing Country

ERIC Educational Resources Information Center

Isiyaku, Dauda Dansarki; Ayub, Ahmad Fauzi Mohd; Abdulkadir, Suhaida

2015-01-01

This study has empirically tested the fitness of a structural model in explaining the influence of two exogenous variables (perceived enjoyment and attitude towards ICTs) on two endogenous variables (behavioural intention and teachers' Information Communication Technology (ICT) usage behavior), based on the proposition of Technology Acceptance…

The human element in technology transfer

NASA Technical Reports Server (NTRS)

Peake, H. J.

1978-01-01

A transfer model composed of three roles and their linkages was considered. This model and a growing body of experience was analyzed to provide guidance in the human elements of technology transfer. For example, criteria for selection of technology transfer agents was described, and some needed working climate factors were known. These concepts were successfully applied to transfer activities.

From the Schoolhouse to the Statehouse: Building a Statewide Model for Technology Education

ERIC Educational Resources Information Center

Rhine, Luke

2013-01-01

This article details the journey Luke Rhine, a Program Specialist in Career and Technology Education at the Maryland State Department of Education, as he went about the difficult task of building consistency and establishing rigorous expectations for Technology education in Maryland. As a result, Maryland has developed a model for Technology…

Not "Just a Tool': A Triadic Model of Technological Non-Neutrality

ERIC Educational Resources Information Center

Rose, Ellen

2012-01-01

The author describes the three bases upon which she rejects the assumption that a technology and its use are neutral: every technology predisposes a certain use; shapes habits of mind and social organizations; and is the outcome of deliberate choices made by individuals and societies. She then proposes a "triadic model" of technological…

A Theoretical Model of Health Information Technology Usage Behaviour with Implications for Patient Safety

ERIC Educational Resources Information Center

Holden, Richard J.; Karsh, Ben-Tzion

2009-01-01

Primary objective: much research and practice related to the design and implementation of information technology in health care has been atheoretical. It is argued that using extant theory to develop testable models of health information technology (HIT) benefits both research and practice. Methods and procedures: several theories of motivation,…

Technology Program Management Model (TPMM) Overview

DTIC Science & Technology

2006-05-10

1 1 “Secure the High Ground” Jeff Craver Project Manager Space and Missile Defense Technical Center Jeff.Craver@US.Army.Mil ff r r r j t r i il...f i l t r ff. r r . r . il UNCLASSIFIED UNCLASSIFIED Technology Program Management Model (TPMM) Overview 05-10-2006 Report Documentation Page Form...DATES COVERED 00-00-2006 to 00-00-2006 4. TITLE AND SUBTITLE Technology Program Management Model (TPMM) Overview 5a. CONTRACT NUMBER 5b. GRANT

Studies to Improve the Science in the GAIM - Full Physics Model

DTIC Science & Technology

2014-01-01

Hromsco, J. J., Sensitivity of IFM /GAIM-GM Model to High Cadence Kp and F10.7 Input, Utah State University/Air Force Institute of Technology, M . S ...Institute of Technology, M . S . Thesis; March, 2011. Nava, O. A ., Analysis of plasma bubble signatures in the ionosphere, Utah State University/Air...Force Institute of Technology, M . S . Thesis; March, 2011. Scherliess, L., R. W. Schunk and D. C. Thompson, Data assimilation models: A ’new’ tool for

Emerging Technologies to Create Inducible and Genetically Defined Porcine Cancer Models.

PubMed

Schook, Lawrence B; Rund, Laurie; Begnini, Karine R; Remião, Mariana H; Seixas, Fabiana K; Collares, Tiago

2016-01-01

There is an emerging need for new animal models that address unmet translational cancer research requirements. Transgenic porcine models provide an exceptional opportunity due to their genetic, anatomic, and physiological similarities with humans. Due to recent advances in the sequencing of domestic animal genomes and the development of new organism cloning technologies, it is now very feasible to utilize pigs as a malleable species, with similar anatomic and physiological features with humans, in which to develop cancer models. In this review, we discuss genetic modification technologies successfully used to produce porcine biomedical models, in particular the Cre-loxP System as well as major advances and perspectives the CRISPR/Cas9 System. Recent advancements in porcine tumor modeling and genome editing will bring porcine models to the forefront of translational cancer research.

ICT & OTs: a model of information and communications technology acceptance and utilisation by occupational therapists (part 2).

PubMed

Schaper, Louise; Pervan, Graham

2007-01-01

The research reported in this paper describes the development, empirical validation and analysis of a model of technology acceptance by Australian occupational therapists. The study described involved the collection of quantitative data through a national survey. The theoretical significance of this work is that it uses a thoroughly constructed research model, with one of the largest sample sizes ever tested (n=1605), to extend technology acceptance research into the health sector. Results provide strong support for the model. This work reveals the complexity of the constructs and relationships that influence technology acceptance and highlights the need to include sociotechnical and system issues in studies of technology acceptance in healthcare to improve information system implementation success in this arena. The results of this study have practical and theoretical implications for health informaticians and researchers in the field of health informatics and information systems, tertiary educators, Commonwealth and State Governments and the allied health professions.

Multidisciplinary optimization in aircraft design using analytic technology models

NASA Technical Reports Server (NTRS)

Malone, Brett; Mason, W. H.

1991-01-01

An approach to multidisciplinary optimization is presented which combines the Global Sensitivity Equation method, parametric optimization, and analytic technology models. The result is a powerful yet simple procedure for identifying key design issues. It can be used both to investigate technology integration issues very early in the design cycle, and to establish the information flow framework between disciplines for use in multidisciplinary optimization projects using much more computational intense representations of each technology. To illustrate the approach, an examination of the optimization of a short takeoff heavy transport aircraft is presented for numerous combinations of performance and technology constraints.

NASA Technical Interchange Meeting (TIM): Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box

NASA Technical Reports Server (NTRS)

ONeil, D. A.; Craig, D. A.; Christensen, C. B.; Gresham, E. C.

2005-01-01

The objective of this Technical Interchange Meeting was to increase the quantity and quality of technical, cost, and programmatic data used to model the impact of investing in different technologies. The focus of this meeting was the Technology Tool Box (TTB), a database of performance, operations, and programmatic parameters provided by technologists and used by systems engineers. The TTB is the data repository used by a system of models known as the Advanced Technology Lifecycle Analysis System (ATLAS). This report describes the result of the November meeting, and also provides background information on ATLAS and the TTB.

Conceptualization of Approaches and Thought Processes Emerging in Validating of Model in Mathematical Modeling in Technology Aided Environment

ERIC Educational Resources Information Center

Hidiroglu, Çaglar Naci; Bukova Güzel, Esra

2013-01-01

The aim of the present study is to conceptualize the approaches displayed for validation of model and thought processes provided in mathematical modeling process performed in technology-aided learning environment. The participants of this grounded theory study were nineteen secondary school mathematics student teachers. The data gathered from the…

Endogenous technological and population change under increasing water scarcity

NASA Astrophysics Data System (ADS)

Pande, S.; Ertsen, M.; Sivapalan, M.

2014-08-01

Ancient civilizations may have dispersed or collapsed under extreme dry conditions. There are indications that the same may hold for modern societies. However, hydroclimatic change cannot be the sole predictor of the fate of contemporary societies in water-scarce regions. This paper focuses on technological change as a factor that may ameliorate the effects of increasing water scarcity and as such counter the effects of hydroclimatic changes. We study the role of technological change on the dynamics of coupled human-water systems, and model technological change as an endogenous process that depends on many factors intrinsic to coupled human-water dynamics. We do not treat technology as an exogenous random sequence of events, but assume that it results from societal actions. While the proposed model is a rather simple model of a coupled human-water system, it is shown to be capable of replicating patterns of technological, population, production and consumption per capita changes. The model demonstrates that technological change may indeed ameliorate the effects of increasing water scarcity, but typically it does so only to a certain extent. In general we find that endogenous technology change under increasing water scarcity helps to delay the peak of population size before it inevitably starts to decline. We also analyze the case when water remains constant over time and find that co-evolutionary trajectories can never grow at a constant rate; rather the rate itself grows with time. Thus our model does not predict a co-evolutionary trajectory of a socio-hydrological system where technological innovation harmoniously provides for a growing population. It allows either for an explosion or an eventual dispersal of population. The latter occurs only under increasing water scarcity. As a result, we draw the conclusion that declining consumption per capita despite technological advancement and increase in aggregate production may serve as a useful predictor of upcoming decline in contemporary societies in water-scarce basins.

The costs of introducing new technologies into space systems

NASA Technical Reports Server (NTRS)

Dodson, E. N.; Partma, H.; Ruhland, W.

1992-01-01

A review is conducted of cost-research studies intended to provide guidelines for cost estimates of integrating new technologies into existing satellite systems. Quantitative methods are described for determining the technological state-of-the-art so that proposed programs can be evaluated accurately in terms of their contribution to technological development. The R&D costs associated with the proposed programs are then assessed with attention given to the technological advances. Also incorporated quantifiably are any reductions in the costs of production, operations, and support afforded by the advanced technologies. The proposed model is employed in relation to a satellite sizing and cost study in which a tradeoff between increased R&D costs and reduced production costs is examined. The technology/cost model provides a consistent yardstick for assessing the true relative economic impact of introducing novel techniques and technologies.

LEVERAGING TECHNOLOGY TO ENHANCE ADDICTION TREATMENT AND RECOVERY

PubMed Central

Marsch, Lisa A.

2012-01-01

Technology such as the Internet and mobile phones offers considerable promise for affecting the assessment, prevention, and treatment of and recovery from substance use disorders. Technology may enable entirely new models of behavioral health care within and outside of formal systems of care. This article reviews the promise of technology-based therapeutic tools for affecting the quality and reach of addiction treatment and recovery support systems, as well as the empirical support to date for this approach. Potential models for implementing technology-based interventions targeting substance use disorders are described. Opportunities to optimize the effectiveness and impact of technology-based interventions targeting addiction and recovery, along with outstanding research needs, are discussed. PMID:22873192

Leveraging technology to enhance addiction treatment and recovery.

PubMed

Marsch, Lisa A

2012-01-01

Technology such as the Internet and mobile phones offers considerable promise for affecting the assessment, prevention, and treatment of and recovery from substance use disorders. Technology may enable entirely new models of behavioral health care within and outside of formal systems of care. This article reviews the promise of technology-based therapeutic tools for affecting the quality and reach of addiction treatment and recovery support systems, as well as the empirical support to date for this approach. Potential models for implementing technology-based interventions targeting substance use disorders are described. Opportunities to optimize the effectiveness and impact of technology-based interventions targeting addiction and recovery, along with outstanding research needs, are discussed.

Science-Technology-Society literacy in college non-majors biology: Comparing problem/case studies based learning and traditional expository methods of instruction

NASA Astrophysics Data System (ADS)

Peters, John S.

This study used a multiple response model (MRM) on selected items from the Views on Science-Technology-Society (VOSTS) survey to examine science-technology-society (STS) literacy among college non-science majors' taught using Problem/Case Studies Based Learning (PBL/CSBL) and traditional expository methods of instruction. An initial pilot investigation of 15 VOSTS items produced a valid and reliable scoring model which can be used to quantitatively assess student literacy on a variety of STS topics deemed important for informed civic engagement in science related social and environmental issues. The new scoring model allows for the use of parametric inferential statistics to test hypotheses about factors influencing STS literacy. The follow-up cross-institutional study comparing teaching methods employed Hierarchical Linear Modeling (HLM) to model the efficiency and equitability of instructional methods on STS literacy. A cluster analysis was also used to compare pre and post course patterns of student views on the set of positions expressed within VOSTS items. HLM analysis revealed significantly higher instructional efficiency in the PBL/CSBL study group for 4 of the 35 STS attitude indices (characterization of media vs. school science; tentativeness of scientific models; cultural influences on scientific research), and more equitable effects of traditional instruction on one attitude index (interdependence of science and technology). Cluster analysis revealed generally stable patterns of pre to post course views across study groups, but also revealed possible teaching method effects on the relationship between the views expressed within VOSTS items with respect to (1) interdependency of science and technology; (2) anti-technology; (3) socioscientific decision-making; (4) scientific/technological solutions to environmental problems; (5) usefulness of school vs. media characterizations of science; (6) social constructivist vs. objectivist views of theories; (7) impact of cultural religious/ethical views on science; (8) tentativeness of scientific models, evidence and predictions; (9) civic control of technological developments. This analysis also revealed common relationships between student views which would not have been revealed under the original unique response model (URM) of VOSTS and also common viewpoint patterns that warrant further qualitative exploration.

Consumer Vehicle Choice Model Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Changzheng; Greene, David L

In response to the Fuel Economy and Greenhouse Gas (GHG) emissions standards, automobile manufacturers will need to adopt new technologies to improve the fuel economy of their vehicles and to reduce the overall GHG emissions of their fleets. The U.S. Environmental Protection Agency (EPA) has developed the Optimization Model for reducing GHGs from Automobiles (OMEGA) to estimate the costs and benefits of meeting GHG emission standards through different technology packages. However, the model does not simulate the impact that increased technology costs will have on vehicle sales or on consumer surplus. As the model documentation states, “While OMEGA incorporates functionsmore » which generally minimize the cost of meeting a specified carbon dioxide (CO2) target, it is not an economic simulation model which adjusts vehicle sales in response to the cost of the technology added to each vehicle.” Changes in the mix of vehicles sold, caused by the costs and benefits of added fuel economy technologies, could make it easier or more difficult for manufacturers to meet fuel economy and emissions standards, and impacts on consumer surplus could raise the costs or augment the benefits of the standards. Because the OMEGA model does not presently estimate such impacts, the EPA is investigating the feasibility of developing an adjunct to the OMEGA model to make such estimates. This project is an effort to develop and test a candidate model. The project statement of work spells out the key functional requirements for the new model.« less

Climate Change and Future U.S. Electricity Infrastructure: the Nexus between Water Availability, Land Suitability, and Low-Carbon Technologies

NASA Astrophysics Data System (ADS)

Rice, J.; Halter, T.; Hejazi, M. I.; Jensen, E.; Liu, L.; Olson, J.; Patel, P.; Vernon, C. R.; Voisin, N.; Zuljevic, N.

2014-12-01

Integrated assessment models project the future electricity generation mix under different policy, technology, and socioeconomic scenarios, but they do not directly address site-specific factors such as interconnection costs, population density, land use restrictions, air quality, NIMBY concerns, or water availability that might affect the feasibility of achieving the technology mix. Moreover, since these factors can change over time due to climate, policy, socioeconomics, and so on, it is important to examine the dynamic feasibility of integrated assessment scenarios "on the ground." This paper explores insights from coupling an integrated assessment model (GCAM-USA) with a geospatial power plant siting model (the Capacity Expansion Regional Feasibility model, CERF) within a larger multi-model framework that includes regional climate, hydrologic, and water management modeling. GCAM-USA is a dynamic-recursive market equilibrium model simulating the impact of carbon policies on global and national markets for energy commodities and other goods; one of its outputs is the electricity generation mix and expansion at the state-level. It also simulates water demands from all sectors that are downscaled as input to the water management modeling. CERF simulates siting decisions by dynamically representing suitable areas for different generation technologies with geospatial analyses (informed by technology-specific siting criteria, such as required mean streamflow per the Clean Water Act), and then choosing siting locations to minimize interconnection costs (to electric transmission and gas pipelines). CERF results are compared across three scenarios simulated by GCAM-USA: 1) a non-mitigation scenario (RCP8.5) in which conventional fossil-fueled technologies prevail, 2) a mitigation scenario (RCP4.5) in which the carbon price causes a shift toward nuclear, carbon capture and sequestration (CCS), and renewables, and 3) a repeat of scenario (2) in which CCS technologies are made unavailable—resulting in a large increase in the nuclear fraction of the mix.

Post Landsat-D advanced concept evaluation /PLACE/

NASA Technical Reports Server (NTRS)

Alexander, L. D.; Alvarado, U. R.; Flatow, F. S.

1979-01-01

The aim of the Post Landsat-D Advanced Concept Evaluation (PLACE) program was to identify the key technology requirements of earth resources satellite systems for the 1985-2000 period. The program involved four efforts: (1) examination of future needs in the earth resources area, (2) creation of a space systems technology model capable of satisfying these needs, (3) identification of key technology requirements posed by this model, and (4) development of a methodology (PRISM) to assist in the priority structuring of the resulting technologies.

Advanced propulsion for LEO-Moon transport. 3: Transportation model. M.S. Thesis - California Univ.

NASA Technical Reports Server (NTRS)

Henley, Mark W.

1992-01-01

A simplified computational model of low Earth orbit-Moon transportation system has been developed to provide insight into the benefits of new transportation technologies. A reference transportation infrastructure, based upon near-term technology developments, is used as a departure point for assessing other, more advanced alternatives. Comparison of the benefits of technology application, measured in terms of a mass payback ratio, suggests that several of the advanced technology alternatives could substantially improve the efficiency of low Earth orbit-Moon transportation.

Manufacturing Technology Support (MATES II) Task Order 0005: Manufacturing Integration and Technology Evaluation to Enable Technology Transition. Subtask Phase 0 Study Task: Manufacturing Technology (ManTech) and Systems Engineering For Quick Reaction Systems

DTIC Science & Technology

2014-10-01

Porosity from gas entrapment & shrinkage 4 Continuous Fiber Ti Metal Matrix Composites (Aircraft panels and rotor components) [14...process models for casting, forging, and welding , and software capability to integrate various independent models with design, thermal, and structural...Applications, Ph.D. Thesis, Queen’s College, University of Oxford, (2007). 14. S.A. Singerman and J.J. Jackson, Titanium Metal Matrix Composites for

A Multi-scale, Multi-Model, Machine-Learning Solar Forecasting Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamann, Hendrik F.

The goal of the project was the development and demonstration of a significantly improved solar forecasting technology (short: Watt-sun), which leverages new big data processing technologies and machine-learnt blending between different models and forecast systems. The technology aimed demonstrating major advances in accuracy as measured by existing and new metrics which themselves were developed as part of this project. Finally, the team worked with Independent System Operators (ISOs) and utilities to integrate the forecasts into their operations.

Marshall Space Flight Center ECLSS technology activities

NASA Technical Reports Server (NTRS)

Wieland, Paul

1990-01-01

Viewgraphs on Environmental Control and Life Support System (ECLSS) technology activities are presented. Topics covered include: analytical development; ECLSS modeling approach; example of water reclamation modeling needs; and hardware development and testing.

How to measure technology assessment: an introduction.

PubMed

Hasman, Arie

2014-01-01

This contribution introduces the Technology Acceptance model. Since information systems are still underutilized, application of models of user acceptance can provide important clues about what can be done to increase system usage.

Model of Providing Assistive Technologies in Special Education Schools.

PubMed

Lersilp, Suchitporn; Putthinoi, Supawadee; Chakpitak, Nopasit

2015-05-14

Most students diagnosed with disabilities in Thai special education schools received assistive technologies, but this did not guarantee the greatest benefits. The purpose of this study was to survey the provision, use and needs of assistive technologies, as well as the perspectives of key informants regarding a model of providing them in special education schools. The participants were selected by the purposive sampling method, and they comprised 120 students with visual, physical, hearing or intellectual disabilities from four special education schools in Chiang Mai, Thailand; and 24 key informants such as parents or caregivers, teachers, school principals and school therapists. The instruments consisted of an assistive technology checklist and a semi-structured interview. Results showed that a category of assistive technologies was provided for students with disabilities, with the highest being "services", followed by "media" and then "facilities". Furthermore, mostly students with physical disabilities were provided with assistive technologies, but those with visual disabilities needed it more. Finally, the model of providing assistive technologies was composed of 5 components: Collaboration; Holistic perspective; Independent management of schools; Learning systems and a production manual for users; and Development of an assistive technology center, driven by 3 major sources such as Government and Private organizations, and Schools.

Technologies to Combat Aedes Mosquitoes: A Model Based on Smart City.

PubMed

de Souza Silva, Geovanna Cristine; Peltonen, Laura-Maria; Pruinelli, Lisiane; Yoshikazu Shishido, Henrique; Jacklin Eler, Gabrielle

2018-01-01

Aedes aegypti and Aedes albopictus mosquitoes are responsible for the transmission of diseases such as dengue fever, yellow fever, chikungunya fever, zika virus fever, some of which can cause irreversible central nervous system problems and death. This study investigates what technologies are being used for combatting and monitoring the Aedes mosquitoes and to propose joining these technologies into a single and complete solution using the Smart Cities concept. A search for newscasts on Google and mobile apps in app stores were performed to identify technological solutions for combat to Aedes mosquitoes. Also, a model for joint technology was proposed. Results identified the following technologies: 170 software, two sensors, two drones, one electronic device, ten mosquito traps/lures, seven biological tools, six biotechnologies, and eight chemical formulations. Technological resources and adoption of preventive measures by the population could be a useful method for the mosquito control. Examples include a georeferenced model for identification and examination of larvae, application of chemical/biological products, real-time mapping, sending of educational materials via email or social media for the population, and alerts to health professionals in the zones of combat/risk. In combination, these technologies may indicate a better solution to the current problem.

Le Bon Samaritain: A Community-Based Care Model Supported by Technology.

PubMed

Gay, Valerie; Leijdekkers, Peter; Gill, Asif; Felix Navarro, Karla

2015-01-01

The effective care and well-being of a community is a challenging task especially in an emergency situation. Traditional technology-based silos between health and emergency services are challenged by the changing needs of the community that could benefit from integrated health and safety services. Low-cost smart-home automation solutions, wearable devices and Cloud technology make it feasible for communities to interact with each other, and with health and emergency services in a timely manner. This paper proposes a new community-based care model, supported by technology, that aims at reducing healthcare and emergency services costs while allowing community to become resilient in response to health and emergency situations. We looked at models of care in different industries and identified the type of technology that can support the suggested new model of care. Two prototypes were developed to validate the adequacy of the technology. The result is a new community-based model of care called 'Le Bon Samaritain'. It relies on a network of people called 'Bons Samaritains' willing to help and deal with the basic care and safety aspects of their community. Their role is to make sure that people in their community receive and understand the messages from emergency and health services. The new care model is integrated with existing emergency warning, community and health services. Le Bon Samaritain model is scalable, community-based and can help people feel safer, less isolated and more integrated in their community. It could be the key to reduce healthcare cost, increase resilience and drive the change for a more integrated emergency and care system.

Status of Technology Development to enable Large Stable UVOIR Space Telescopes

NASA Astrophysics Data System (ADS)

Stahl, H. Philip; MSFC AMTD Team

2017-01-01

NASA MSFC has two funded Strategic Astrophysics Technology projects to develop technology for potential future large missions: AMTD and PTC. The Advanced Mirror Technology Development (AMTD) project is developing technology to make mechanically stable mirrors for a 4-meter or larger UVOIR space telescope. AMTD is demonstrating this technology by making a 1.5 meter diameter x 200 mm thick ULE(C) mirror that is 1/3rd scale of a full size 4-m mirror. AMTD is characterizing the mechanical and thermal performance of this mirror and of a 1.2-meter Zerodur(R) mirror to validate integrate modeling tools. Additionally, AMTD has developed integrated modeling tools which are being used to evaluate primary mirror systems for a potential Habitable Exoplanet Mission and analyzed the interaction between optical telescope wavefront stability and coronagraph contrast leakage. Predictive Thermal Control (PTC) project is developing technology to enable high stability thermal wavefront performance by using integrated modeling tools to predict and actively control the thermal environment of a 4-m or larger UVOIR space telescope.

Validation of the PVSyst Performance Model for the Concentrix CPV Technology

NASA Astrophysics Data System (ADS)

Gerstmaier, Tobias; Gomez, María; Gombert, Andreas; Mermoud, André; Lejeune, Thibault

2011-12-01

The accuracy of the two-stage PVSyst model for the Concentrix CPV Technology is determined by comparing modeled to measured values. For both stages, i) the module model and ii) the power plant model, the underlying approaches are explained and methods for obtaining the model parameters are presented. The performance of both models is quantified using 19 months of outdoor measurements for the module model and 9 months of measurements at four different sites for the power plant model. Results are presented by giving statistical quantities for the model accuracy.

A multi-level model of emerging technology: An empirical study of the evolution of biotechnology from 1976 to 2003

PubMed Central

van Witteloostuijn, Arjen

2018-01-01

In this paper, we develop an ecological, multi-level model that can be used to study the evolution of emerging technology. More specifically, by defining technology as a system composed of a set of interacting components, we can build upon the argument of multi-level density dependence from organizational ecology to develop a distribution-independent model of technological evolution. This allows us to distinguish between different stages of component development, which provides more insight into the emergence of stable component configurations, or dominant designs. We validate our hypotheses in the biotechnology industry by using patent data from the USPTO from 1976 to 2003. PMID:29795575

BIM integration in education: A case study of the construction technology project Bolt Tower Dolni Vitkovice

NASA Astrophysics Data System (ADS)

Venkrbec, Vaclav; Bittnerova, Lucie

2017-12-01

Building information modeling (BIM) can support effectiveness during many activities in the AEC industry. even when processing a construction-technological project. This paper presents an approach how to use building information model in higher education, especially during the work on diploma thesis and it supervision. Diploma thesis is project based work, which aims to compile a construction-technological project for a selected construction. The paper describes the use of input data, working with them and compares this process with standard input data such as printed design documentation. The effectiveness of using the building information model as a input data for construction-technological project is described in the conclusion.

Human life support during interplanetary travel and domicile. V - Mars expedition technology trade study for solid waste management

NASA Technical Reports Server (NTRS)

Ferrall, Joe; Rohatgi, Naresh K.; Seshan, P. K.

1992-01-01

A model has been developed for NASA to quantitatively compare and select life support systems and technology options. The model consists of a modular, top-down hierarchical breakdown of the life support system into subsystems, and further breakdown of subsystems into functional elements representing individual processing technologies. This paper includes the technology trades for a Mars mission, using solid waste treatment technologies to recover water from selected liquid and solid waste streams. Technologies include freeze drying, thermal drying, wet oxidation, combustion, and supercritical-water oxidation. The use of these technologies does not have any significant advantages with respect to weight; however, significant power penalties are incurred. A benefit is the ability to convert hazardous waste into a useful resource, namely water.

Energy Technology Allocation for Distributed Energy Resources: A Technology-Policy Framework

NASA Astrophysics Data System (ADS)

Mallikarjun, Sreekanth

Distributed energy resources (DER) are emerging rapidly. New engineering technologies, materials, and designs improve the performance and extend the range of locations for DER. In contrast, constructing new or modernizing existing high voltage transmission lines for centralized generation are expensive and challenging. In addition, customer demand for reliability has increased and concerns about climate change have created a pull for swift renewable energy penetration. In this context, DER policy makers, developers, and users are interested in determining which energy technologies to use to accommodate different end-use energy demands. We present a two-stage multi-objective strategic technology-policy framework for determining the optimal energy technology allocation for DER. The framework simultaneously considers economic, technical, and environmental objectives. The first stage utilizes a Data Envelopment Analysis model for each end-use to evaluate the performance of each energy technology based on the three objectives. The second stage incorporates factor efficiencies determined in the first stage, capacity limitations, dispatchability, and renewable penetration for each technology, and demand for each end-use into a bottleneck multi-criteria decision model which provides the Pareto-optimal energy resource allocation. We conduct several case studies to understand the roles of various distributed energy technologies in different scenarios. We construct some policy implications based on the model results of set of case studies.

The Deflector Selector: A Machine Learning Framework for Prioritizing Hazardous Object Deflection Technology Development

NASA Astrophysics Data System (ADS)

Nesvold, Erika; Greenberg, Adam; Erasmus, Nicolas; Van Heerden, Elmarie; Galache, J. L.; Dahlstrom, Eric; Marchis, Franck

2018-01-01

Several technologies have been proposed for deflecting a hazardous Solar System object on a trajectory that would otherwise impact the Earth. The effectiveness of each technology depends on several characteristics of the given object, including its orbit and size. The distribution of these parameters in the likely population of Earth-impacting objects can thus determine which of the technologies are most likely to be useful in preventing a collision with the Earth. None of the proposed deflection technologies has been developed and fully tested in space. Developing every proposed technology is currently prohibitively expensive, so determining now which technologies are most likely to be effective would allow us to prioritize a subset of proposed deflection technologies for funding and development. We will present a new model, the Deflector Selector, that takes as its input the characteristics of a hazardous object or population of such objects and predicts which technology would be able to perform a successful deflection. The model consists of a machine-learning algorithm trained on data produced by N-body integrations simulating the deflections. We will describe the model and present the results of tests of the effectiveness of nuclear explosives, kinetic impactors, and gravity tractors on three simulated populations of hazardous objects.

The Deflector Selector: A machine learning framework for prioritizing hazardous object deflection technology development

NASA Astrophysics Data System (ADS)

Nesvold, E. R.; Greenberg, A.; Erasmus, N.; van Heerden, E.; Galache, J. L.; Dahlstrom, E.; Marchis, F.

2018-05-01

Several technologies have been proposed for deflecting a hazardous Solar System object on a trajectory that would otherwise impact the Earth. The effectiveness of each technology depends on several characteristics of the given object, including its orbit and size. The distribution of these parameters in the likely population of Earth-impacting objects can thus determine which of the technologies are most likely to be useful in preventing a collision with the Earth. None of the proposed deflection technologies has been developed and fully tested in space. Developing every proposed technology is currently prohibitively expensive, so determining now which technologies are most likely to be effective would allow us to prioritize a subset of proposed deflection technologies for funding and development. We present a new model, the Deflector Selector, that takes as its input the characteristics of a hazardous object or population of such objects and predicts which technology would be able to perform a successful deflection. The model consists of a machine-learning algorithm trained on data produced by N-body integrations simulating the deflections. We describe the model and present the results of tests of the effectiveness of nuclear explosives, kinetic impactors, and gravity tractors on three simulated populations of hazardous objects.

Beyond technology acceptance to effective technology use: a parsimonious and actionable model.

PubMed

Holahan, Patricia J; Lesselroth, Blake J; Adams, Kathleen; Wang, Kai; Church, Victoria

2015-05-01

To develop and test a parsimonious and actionable model of effective technology use (ETU). Cross-sectional survey of primary care providers (n = 53) in a large integrated health care organization that recently implemented new medication reconciliation technology. Surveys assessed 5 technology-related perceptions (compatibility with work values, implementation climate, compatibility with work processes, perceived usefulness, and ease of use) and 1 outcome variable, ETU. ETU was measured as both consistency and quality of technology use. Compatibility with work values and implementation climate were found to have differential effects on consistency and quality of use. When implementation climate was strong, consistency of technology use was high. However, quality of technology use was high only when implementation climate was strong and values compatibility was high. This is an important finding and highlights the importance of users' workplace values as a key determinant of quality of use. To extend our effectiveness in implementing new health care information technology, we need parsimonious models that include actionable determinants of ETU and account for the differential effects of these determinants on the multiple dimensions of ETU. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

On Technology and Schools: A Conversation with Chris Dede.

ERIC Educational Resources Information Center

O'Neil, John

1995-01-01

According to futurist/educational technology expert Chris Dede, new technologies will revolutionize education only when used to support new models of teaching and learning. Grafting technological solutions onto antiquated structures and learning approaches is misguided. Sidebars explain schools' technology access problems and review Clifford…

System Study: Technology Assessment and Prioritizing

NASA Technical Reports Server (NTRS)

2005-01-01

The objective of this NASA funded project is to assess and prioritize advanced technologies required to achieve the goals for an "Intelligent Propulsion System" through collaboration among GEAE, NASA, and Georgia Tech. Key GEAE deliverables are parametric response surface equations (RSE's) relating technology features to system benefits (sfc, weight, fuel burn, design range, acoustics, emission, etc...) and listings of Technology Impact Matrix (TIM) with benefits, debits, and approximate readiness status. TIM has been completed for GEAE and NASA proposed technologies. The combined GEAE and NASA TIM input requirement is shown in Table.1. In the course of building the RSE's and TIM, significant parametric technology modeling and RSE accuracy improvements were accomplished. GEAE has also done preliminary ranking of the technologies using Georgia Tech/GEAE USA developed technology evaluation tools. System level impact was performed by combining beneficial technologies with minimum conflict among various system figures of merits to assess their overall benefits to the system. The shortfalls and issues with modeling the proposed technologies are identified, and recommendations for future work are also proposed.

Continuous Improvement of a Groundwater Model over a 20-Year Period: Lessons Learned.

PubMed

Andersen, Peter F; Ross, James L; Fenske, Jon P

2018-04-17

Groundwater models developed for specific sites generally become obsolete within a few years due to changes in: (1) modeling technology; (2) site/project personnel; (3) project funding; and (4) modeling objectives. Consequently, new models are sometimes developed for the same sites using the latest technology and data, but without potential knowledge gained from the prior models. When it occurs, this practice is particularly problematic because, although technology, data, and observed conditions change, development of the new numerical model may not consider the conceptual model's underpinnings. As a contrary situation, we present the unique case of a numerical flow and trichloroethylene (TCE) transport model that was first developed in 1993 and since revised and updated annually by the same personnel. The updates are prompted by an increase in the amount of data, exposure to a wider range of hydrologic conditions over increasingly longer timeframes, technological advances, evolving modeling objectives, and revised modeling methodologies. The history of updates shows smooth, incremental changes in the conceptual model and modeled aquifer parameters that result from both increase and decrease in complexity. Myriad modeling objectives have included demonstrating the ineffectiveness of a groundwater extraction/injection system, evaluating potential TCE degradation, locating new monitoring points, and predicting likelihood of exceedance of groundwater standards. The application emphasizes an original tenet of successful groundwater modeling: iterative adjustment of the conceptual model based on observations of actual vs. model response. © 2018, National Ground Water Association.

Cross-cultural adaptation of the assistive technology device - Predisposition assessment (ATD PA) for use in Brazil (ATD PA Br).

PubMed

Alves, Ana Cristina de Jesus; Matsukura, Thelma Simões; Scherer, Marcia J

2017-02-01

The purpose of this study is to conduct a cross-cultural adaptation of the Assistive Technology Device Predisposition Assessment (ATD PA) for use in Brazil. The selection of the Assistive Technology Device Predisposition Assessment (ATD PA) was determined by previous literature reviews of articles published in 2014 and 2016 in six databases with the terms "assistive device" or "assistive technology" or "self-help device" combined with "evidence-based practice" or "framework" or "measurement scale" or "model and outcome assessment". This review indicated that the conceptual model of Assistive Technology (AT) most discussed in the literature was the Matching Person and Technology (MPT) model, and this finding determined the selection of ATD PA as an assessment within the MPT portfolio of measures. The procedures for cross-cultural adaptation were as follows: Equivalence of Concept, Semantic and Operational. Five experts were asked to translate 725 items and these translations were evaluated and a high level of agreement was demonstrated. The Portuguese version, Avaliação de Tecnologia Assistiva - Predisposição ao Uso - ATD PA Br, was derived from the original version in English (ATD PA). The ATD PA Br will support professionals and people with disabilities in Brazil to better select AT devices according to the clients' needs. Implications for rehabilitation Provides a systematic way of selecting assistive technology devices for the use of individuals with disabilities according to the Brazilian reality. A systematic way of selecting the assistive technology that can help decrease the abandonment of the assistive technology use. The use of the Matching Person and Technology theorical model and of the assessment ATD PA Br is essential to guide the researches and clinical practice in Brazil.

Energy demand analytics using coupled technological and economic models

EPA Science Inventory

Impacts of a range of policy scenarios on end-use energy demand are examined using a coupling of MARKAL, an energy system model with extensive supply and end-use technological detail, with Inforum LIFT, a large-scale model of the us. economy with inter-industry, government, and c...

Modeling and MBL: Software Tools for Science.

ERIC Educational Resources Information Center

Tinker, Robert F.

Recent technological advances and new software packages put unprecedented power for experimenting and theory-building in the hands of students at all levels. Microcomputer-based laboratory (MBL) and model-solving tools illustrate the educational potential of the technology. These tools include modeling software and three MBL packages (which are…

Model Learner Outcomes for Technology Education/Industrial Technology.

ERIC Educational Resources Information Center

Minnesota State Dept. of Education, St. Paul.

This guide provides model learner outcomes used by communities and schools to improve learning experiences in trade and industrial education. It contains a mission statement for public education in Minnesota and 13 learner goals that must be incorporated into each district's goal statements. The bulk of this document contains model learner…

An Exploration of the Factors Influencing the Adoption of an IS Governance Framework

ERIC Educational Resources Information Center

Parker, Sharon L.

2013-01-01

This research explored IT governance framework adoption, leveraging established IS theories. It applied both the technology acceptance model (TAM) and the technology, organization, environment (TOE) models. The study consisted of developing a model utilizing TOE and TAM, deriving relevant hypotheses. Interviews with a group of practitioners…

Advanced Electronics Technologies: Challenges for Radiation Effects Testing, Modeling, and Mitigation

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Cohn, Lewis M.

2005-01-01

Emerging Electronics Technologies include: 1) Changes in the commercial semiconductor world; 2) Radiation Effects Sources (A sample test constraint); and 3) Challenges to Radiation Testing and Modeling: a) IC Attributes-Radiation Effects Implication b) Fault Isolation c) Scaled Geometry d) Speed e) Modeling Shortfall f) Knowledge Status

Design Software Gives Rocketry a Boost in the Classroom

ERIC Educational Resources Information Center

Wilson, Spencer C.

2005-01-01

Building and launching model rockets makes a great activity for a technology education class. A model rocket curriculum provides a valuable tool for improving students' technical skills, including following technical instructions and procedures while learning about aerospace technology. This article describes a way of making model rocketry more…

Model Educational Specifications for Technology in Schools.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, College Park. Office of Administration and Finance.

This description of the Model Edspec, which can be used by itself or in conjunction with the "Format Guide of Educational Specifications," serves as a comprehensive planning tool for the selection and application of technology. The model is designed to assist schools in implementing the facilities development process, thereby making…

Empowering Prospective Teachers to Become Active Sense-Makers: Multimodal Modeling of the Seasons

ERIC Educational Resources Information Center

Kim, Mi Song

2015-01-01

Situating science concepts in concrete and authentic contexts, using information and communications technologies, including multimodal modeling tools, is important for promoting the development of higher-order thinking skills in learners. However, teachers often struggle to integrate emergent multimodal models into a technology-rich informal…

3D Modelling and Printing Technology to Produce Patient-Specific 3D Models.

PubMed

Birbara, Nicolette S; Otton, James M; Pather, Nalini

2017-11-10

A comprehensive knowledge of mitral valve (MV) anatomy is crucial in the assessment of MV disease. While the use of three-dimensional (3D) modelling and printing in MV assessment has undergone early clinical evaluation, the precision and usefulness of this technology requires further investigation. This study aimed to assess and validate 3D modelling and printing technology to produce patient-specific 3D MV models. A prototype method for MV 3D modelling and printing was developed from computed tomography (CT) scans of a plastinated human heart. Mitral valve models were printed using four 3D printing methods and validated to assess precision. Cardiac CT and 3D echocardiography imaging data of four MV disease patients was used to produce patient-specific 3D printed models, and 40 cardiac health professionals (CHPs) were surveyed on the perceived value and potential uses of 3D models in a clinical setting. The prototype method demonstrated submillimetre precision for all four 3D printing methods used, and statistical analysis showed a significant difference (p<0.05) in precision between these methods. Patient-specific 3D printed models, particularly using multiple print materials, were considered useful by CHPs for preoperative planning, as well as other applications such as teaching and training. This study suggests that, with further advances in 3D modelling and printing technology, patient-specific 3D MV models could serve as a useful clinical tool. The findings also highlight the potential of this technology to be applied in a variety of medical areas within both clinical and educational settings. Copyright © 2017 Australian and New Zealand Society of Cardiac and Thoracic Surgeons (ANZSCTS) and the Cardiac Society of Australia and New Zealand (CSANZ). Published by Elsevier B.V. All rights reserved.

Model architecture of intelligent data mining oriented urban transportation information

NASA Astrophysics Data System (ADS)

Yang, Bogang; Tao, Yingchun; Sui, Jianbo; Zhang, Feizhou

2007-06-01

Aiming at solving practical problems in urban traffic, the paper presents model architecture of intelligent data mining from hierarchical view. With artificial intelligent technologies used in the framework, the intelligent data mining technology improves, which is more suitable for the change of real-time road condition. It also provides efficient technology support for the urban transport information distribution, transmission and display.

Impact of Media Richness and Flow on E-Learning Technology Acceptance

ERIC Educational Resources Information Center

Liu, Su-Houn; Liao, Hsiu-Li; Pratt, Jean A.

2009-01-01

Advances in e-learning technologies parallels a general increase in sophistication by computer users. The use of just one theory or model, such as the technology acceptance model, is no longer sufficient to study the intended use of e-learning systems. Rather, a combination of theories must be integrated in order to fully capture the complexity of…

Network Centric Warfare in the U.S. Navy’s Fifth Fleet. Network-Supported Operational Level Command and Control in Operation Enduring Freedom

DTIC Science & Technology

2004-06-01

Mark Adkins Director of Research Ph.D Human Communication adkins@arizona.edu Dr. John Kruse Director of Programming Ph.D Management Information Systems...Theory • Network Centric Warfare • Technology Adoption – Technology Adoption Model – Technology Transition Model • Human Communication – Social Context

An Exploration of Student Internet Use in India: The Technology Acceptance Model and the Theory of Planned Behaviour

ERIC Educational Resources Information Center

Fusilier, Marcelline; Durlabhji, Subhash

2005-01-01

Purpose: The purpose of this paper is to explore behavioral processes involved in internet technology acceptance and use with a sample in India, a developing country that can potentially benefit from greater participation in the web economy. Design/methodology/approach - User experience was incorporated into the technology acceptance model (TAM)…

A Path Analysis of Pre-Service Teachers' Attitudes to Computer Use: Applying and Extending the Technology Acceptance Model in an Educational Context

ERIC Educational Resources Information Center

Teo, Timothy

2010-01-01

The purpose of this study is to examine pre-service teachers' attitudes to computers. This study extends the technology acceptance model (TAM) framework by adding subjective norm, facilitating conditions, and technological complexity as external variables. Results show that the TAM and subjective norm, facilitating conditions, and technological…

ENVIRONMENTAL TECHNOLOGY VERIFICATION, TEST REPORT OF CONTROL OF BIOAEROSOLS IN HVAC SYSTEMS: TRI-DIM FILTER CORP. PREDATOR II MODEL 8VADTP123C23

EPA Science Inventory

The Environmental Technology Verification report discusses the technology and performance of the Predator II, Model 8VADTP123C23CC000 air filter for dust and bioaerosol filtration manufactured by Tri-Dim Filter Corporation. The pressure drop across the filter was 138 Pa clean and...

Summer Teacher Enhancement Institute for Science, Mathematics, and Technology Using the Problem-Based Learning Model

NASA Technical Reports Server (NTRS)

Petersen, Richard H.

1997-01-01

The objectives of the Institute were: (a) increase participants' content knowledge about aeronautics, science, mathematics, and technology, (b) model and promote the use of scientific inquiry through problem-based learning, (c) investigate the use of instructional technologies and their applications to curricula, and (d) encourage the dissemination of TEI experiences to colleagues, students, and parents.

A Comparative Analysis of Spatial Visualization Ability and Drafting Models for Industrial and Technology Education Students

ERIC Educational Resources Information Center

Katsioloudis, Petros; Jovanovic, Vukica; Jones, Mildred

2014-01-01

The main purpose of this study was to determine significant positive effects among the use of three different types of drafting models, and to identify whether any differences exist towards promotion of spatial visualization ability for students in Industrial Technology and Technology Education courses. In particular, the study compared the use of…

Understanding Modelling in Technology and Science: The Potential of Stories from the Field

ERIC Educational Resources Information Center

France, Bev; Compton, Vicki J.; Gilbert, John K.

2011-01-01

This paper tells the story of how two biotechnologists used models, one working as a technologist and the other as a scientist. These stories were collected during the development of the key ideas about the nature of technology and technological knowledge during the latest curriculum development in New Zealand. Their stories of how and why they…

Predicting the Performance of Radiant Technologies in Attics: Reducing the Discrepancies Between Attic Specific and Whole-Building Energy Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merket, Noel D; DeGraw, Jason W; Lee, Edwin S

The use of radiant technology in attics aims to reduce the radiation component of heat transfer between the attic floor and roof decks, gables, and eaves. Recently, it has been shown that EnergyPlus underestimates the savings using radiant technologies in attic spaces. The aim of this study is to understand why EnergyPlus underestimates the performance of radiant technologies and provide a solution strategy that works within the current capabilities of EnergyPlus. The analysis uses three attic energy models as a baseline for comparison for EnergyPlus. Potential reasons for the discrepancies between the attic specific energy models and EnergyPlus are isolatedmore » and individually tested. A solution strategy is proposed using the Energy Management System (EMS) capabilities within EnergyPlus. This solution strategy produces similar results to the other attic specific energy models. This paper shows that the current capabilities of EnergyPlus are sufficient to simulate radiant technologies in attics. The methodology showcased in this paper serves as a guide for engineers and researchers who would like to predict the performance radiant technology in attics using the whole building energy software, EnergyPlus.« less

The HTA core model: a novel method for producing and reporting health technology assessments.

PubMed

Lampe, Kristian; Mäkelä, Marjukka; Garrido, Marcial Velasco; Anttila, Heidi; Autti-Rämö, Ilona; Hicks, Nicholas J; Hofmann, Björn; Koivisto, Juha; Kunz, Regina; Kärki, Pia; Malmivaara, Antti; Meiesaar, Kersti; Reiman-Möttönen, Päivi; Norderhaug, Inger; Pasternack, Iris; Ruano-Ravina, Alberto; Räsänen, Pirjo; Saalasti-Koskinen, Ulla; Saarni, Samuli I; Walin, Laura; Kristensen, Finn Børlum

2009-12-01

The aim of this study was to develop and test a generic framework to enable international collaboration for producing and sharing results of health technology assessments (HTAs). Ten international teams constructed the HTA Core Model, dividing information contained in a comprehensive HTA into standardized pieces, the assessment elements. Each element contains a generic issue that is translated into practical research questions while performing an assessment. Elements were described in detail in element cards. Two pilot assessments, designated as Core HTAs were also produced. The Model and Core HTAs were both validated. Guidance on the use of the HTA Core Model was compiled into a Handbook. The HTA Core Model considers health technologies through nine domains. Two applications of the Model were developed, one for medical and surgical interventions and another for diagnostic technologies. Two Core HTAs were produced in parallel with developing the model, providing the first real-life testing of the Model and input for further development. The results of formal validation and public feedback were primarily positive. Development needs were also identified and considered. An online Handbook is available. The HTA Core Model is a novel approach to HTA. It enables effective international production and sharing of HTA results in a structured format. The face validity of the Model was confirmed during the project, but further testing and refining are needed to ensure optimal usefulness and user-friendliness. Core HTAs are intended to serve as a basis for local HTA reports. Core HTAs do not contain recommendations on technology use.

The Use of 3D Printing Technology in the Ilizarov Method Treatment: Pilot Study.

PubMed

Burzyńska, Karolina; Morasiewicz, Piotr; Filipiak, Jarosław

2016-01-01

Significant developments in additive manufacturing technology have occurred in recent years. 3D printing techniques can also be helpful in the Ilizarov method treatment. The aim of this study was to evaluate the usefulness of 3D printing technology in the Ilizarov method treatment. Physical models of bones used to plan the spatial design of Ilizarov external fixator were manufactured by FDM (Fused Deposition Modeling) spatial printing technology. Bone models were made of poly(L-lactide) (PLA). Printed 3D models of both lower leg bones allow doctors to prepare in advance for the Ilizarov method treatment: detailed consideration of the spatial configuration of the external fixation, experimental assembly of the Ilizarov external fixator onto the physical models of bones prior to surgery, planning individual osteotomy level and Kirschner wires introduction sites. Printed 3D bone models allow for accurate preparation of the Ilizarov apparatus spatially matched to the size of the bones and prospective bone distortion. Employment of the printed 3D models of bone will enable a more precise design of the apparatus, which is especially useful in multiplanar distortion and in the treatment of axis distortion and limb length discrepancy in young children. In the course of planning the use of physical models manufactured with additive technology, attention should be paid to certain technical aspects of model printing that have an impact on the accuracy of mapping of the geometry and physical properties of the model. 3D printing technique is very useful in 3D planning of the Ilizarov method treatment.

Democratizing science and technology education: Perspectives from the philosophy of education

NASA Astrophysics Data System (ADS)

Pierce, Clayton Todd

This study examines conceptualizations of science and technology and their relation to ideas of democratic education in the history of philosophy of education. My genealogical analysis begins by tracing the anti-democratic emergence of ideas and values of science and technology that have evolved through ancient and modern periods within the philosophy of education and continue to shape the ways science and technology are understood and treated in educational settings. From my critical engagement with Plato's Republic and Rousseau's Emile, I argue that anti-democratic structures and values have been embedded in philosophy of education through Plato's educational theory of techne and Rousseau's pedagogical theory that involves science and technology as important educational force. Following this theme, I analyze the work of John Dewey and Herbert Marcuse and their shared project for democratizing science and technology through education. Through a critical comparison of both theorists' models, I suggest that each provides positive legacies for philosophy of education to draw upon in rethinking the intersection of science, technology, and education: a strong model for understanding public problems associated with a highly technological and scientific society and a reconstructive framework for values and sensibilities that demands a new value relationship to be developed between humans and science and technology. Finally, I situate my critique and assessment of this history in the philosophy of education within the current science and technology education reform movement in the United States. I claim that the official models of science and technological literacy and inquiry, as constructed by the National Academy of Sciences and a host of governmental policies, shape science and technology education with a decidedly neo-liberal focus and purpose. In response to this anti-democratic movement I offer an alternative position that utilizes a counter-epistemology to the dominant model that currently exists in science education standards and suggest that this is a project that philosophy of education must be involved while also conscious of its past.

Innovative Organization of Project Activity of Construction Students

NASA Astrophysics Data System (ADS)

Stolbova, I. D.; Aleksandrova, E. P.; Krainova, M. N.

2017-11-01

The construction industry competitiveness depends on its equipping with information modeling technologies. This requires training and development of human resources. The advantages of BIM-technologies are considered. The requirements for the specialists capable of promoting information modeling technologies in the construction industry are discussed. For a wide application of BIM-technologies, the problem of training personnel with a new thinking must be solved. When preparing graduates of the major “Construction”, it is necessary to introduce innovative educational technologies aimed at building the students’ ability for team work, competences in the field of modern information and communication technologies, as well as design skills basing on spatial modeling. Graphic training is the first discipline of the professional orientation for construction students. In the context of training it is important to create such learning environment that is close to a professional one. The paper provides the examples of practice-oriented assignments based on the project method in the course of students’ independent work.

Projecting technology change to improve space technology planning and systems management

NASA Astrophysics Data System (ADS)

Walk, Steven Robert

2011-04-01

Projecting technology performance evolution has been improving over the years. Reliable quantitative forecasting methods have been developed that project the growth, diffusion, and performance of technology in time, including projecting technology substitutions, saturation levels, and performance improvements. These forecasts can be applied at the early stages of space technology planning to better predict available future technology performance, assure the successful selection of technology, and improve technology systems management strategy. Often what is published as a technology forecast is simply scenario planning, usually made by extrapolating current trends into the future, with perhaps some subjective insight added. Typically, the accuracy of such predictions falls rapidly with distance in time. Quantitative technology forecasting (QTF), on the other hand, includes the study of historic data to identify one of or a combination of several recognized universal technology diffusion or substitution patterns. In the same manner that quantitative models of physical phenomena provide excellent predictions of system behavior, so do QTF models provide reliable technological performance trajectories. In practice, a quantitative technology forecast is completed to ascertain with confidence when the projected performance of a technology or system of technologies will occur. Such projections provide reliable time-referenced information when considering cost and performance trade-offs in maintaining, replacing, or migrating a technology, component, or system. This paper introduces various quantitative technology forecasting techniques and illustrates their practical application in space technology and technology systems management.

How Useful Are Our Models? Pre-Service and Practicing Teacher Evaluations of Technology Integration Models

ERIC Educational Resources Information Center

Kimmons, Royce; Hall, Cassidy

2018-01-01

We report on a survey of K-12 teachers and teacher candidates wherein participants evaluated known models (e.g., TPACK, SAMR, RAT, TIP) and provided insight on what makes a model valuable for them in the classroom. Results indicated that: (1) technology integration should be coupled with good theory to be effective, (2) classroom experience did…

A New Model of Educational Innovation: Exploring the Nexus of Organizational Learning, Distributed Leadership, and Digital Technologies

ERIC Educational Resources Information Center

Rikkerink, Marleen; Verbeeten, Henk; Simons, Robert-Jan; Ritzen, Henk

2016-01-01

This study presents the development process of a new model of educational innovation, that involves the use of digital technologies. The model is based on a broad theoretical framework together with research involving this long-term case study. The backbone of the model consists of a fundamental revision of a multi-level Organizational Learning…

SOA-based model for value-added ITS services delivery.

PubMed

Herrera-Quintero, Luis Felipe; Maciá-Pérez, Francisco; Marcos-Jorquera, Diego; Gilart-Iglesias, Virgilio

2014-01-01

Integration is currently a key factor in intelligent transportation systems (ITS), especially because of the ever increasing service demands originating from the ITS industry and ITS users. The current ITS landscape is made up of multiple technologies that are tightly coupled, and its interoperability is extremely low, which limits ITS services generation. Given this fact, novel information technologies (IT) based on the service-oriented architecture (SOA) paradigm have begun to introduce new ways to address this problem. The SOA paradigm allows the construction of loosely coupled distributed systems that can help to integrate the heterogeneous systems that are part of ITS. In this paper, we focus on developing an SOA-based model for integrating information technologies (IT) into ITS to achieve ITS service delivery. To develop our model, the ITS technologies and services involved were identified, catalogued, and decoupled. In doing so, we applied our SOA-based model to integrate all of the ITS technologies and services, ranging from the lowest-level technical components, such as roadside unit as a service (RSUAAS), to the most abstract ITS services that will be offered to ITS users (value-added services). To validate our model, a functionality case study that included all of the components of our model was designed.

Business model innovation in the water sector in developing countries.

PubMed

Gebauer, Heiko; Saul, Caroline Jennings

2014-08-01

Various technologies have been deployed in household devices or micro-water treatment plants for mitigating fluoride and arsenic, and thereby provide safe and affordable drinking water in low-income countries. While the technologies have improved considerably, organizations still face challenges in making them financially sustainable. Financial sustainability questions the business models behind these water technologies. This article makes three contributions to business models in the context of fluoride and arsenic mitigation. Firstly, we describe four business models: A) low-value devices given away to people living in extreme poverty, B) high-value devices sold to low-income customers, C) communities as beneficiaries of micro-water treatment plants and D) entrepreneurs as franchisees for selling water services and highlight the emergence of hybrid business models. Secondly, we show current business model innovations such as cost transparency & cost reductions, secured & extended water payments, business diversification and distribution channels. Thirdly, we describe skills and competencies as part of capacity building for creating even more business model innovations. Together, these three contributions will create more awareness of the role of business models in scaling-up water treatment technologies. Copyright © 2014 Elsevier B.V. All rights reserved.

Building partnerships: a pilot study of stakeholders' attitudes on technology disruption in behavioral health delivery and research.

PubMed

Sucala, Madalina; Nilsen, Wendy; Muench, Frederick

2017-12-01

Collaborations between scientists, care providers, and technology industry professionals are becoming more relevant for developing, testing, and implementing behavioral health technologies. As the need for such partnerships increases, it is important to understand stakeholders' attitudes about their role in partnering for developing such technologies and how much do they expect technology to impact behavioral research and care. The aim of this study was to investigate how much technology disruption do stakeholders expect in healthcare, as well as their perceived contribution in partnering for developing behavioral health technologies. Stakeholders (N = 74) responded to an online convenience sampling survey. Over 89% of participants reported expecting that technology will bring at least a moderate amount of disruption in the current models of behavioral healthcare, with respondents with the most experience in digital health expecting the most disruption. As for their perception of each other's role in partnering for developing behavioral health technologies, one group's weakness was considered to be complemented by another group's strength. Academics were perceived as having more theoretical and research expertise but being less technology-savvy, while industry professionals were considered to excel at technological and marketing activities. Providers were considered to have the most clinical and real-world healthcare industry expertise. Our results indicate that technology is expected to disrupt current healthcare models, while also highlighting the need for collaboration, as no single group was considered to have sufficient expertise and resources to develop successful, effective behavioral health technologies on its own. These results may contribute to a better understanding of how technology disruption is affecting behavioral healthcare from the standpoint of its key players, which may lead to better collaborative models of research and care delivery.

Vehicle Technology Simulation and Analysis Tools | Transportation Research

Science.gov Websites

| NREL Vehicle Technology Simulation and Analysis Tools Vehicle Technology Simulation and vehicle technologies with the potential to achieve significant fuel savings and emission reductions. NREL : Automotive Deployment Options Projection Tool The ADOPT modeling tool estimates vehicle technology

A Fast Technology Infusion Model for Aerospace Organizations

NASA Technical Reports Server (NTRS)

Shapiro, Andrew A.; Schone, Harald; Brinza, David E.; Garrett, Henry B.; Feather, Martin S.

2006-01-01

A multi-year Fast Technology Infusion initiative proposes a model for aerospace organizations to improve the cost-effectiveness by which they mature new, in-house developed software and hardware technologies for space mission use. The first year task under the umbrella of this initiative will provide the framework to demonstrate and document the fast infusion process. The viability of this approach will be demonstrated on two technologies developed in prior years with internal Jet Propulsion Laboratory (JPL) funding. One hardware technology and one software technology were selected for maturation within one calendar year or less. The overall objective is to achieve cost and time savings in the qualification of technologies. At the end of the recommended three-year effort, we will have demonstrated for six or more in-house developed technologies a clear path to insertion using a documented process that permits adaptation to a broad range of hardware and software projects.

Cryogenic Propellant Storage and Transfer (CPST) Technology Maturation: Establishing a Foundation for a Technology Demonstration Mission (TDM)

NASA Technical Reports Server (NTRS)

Doherty, Michael P.; Meyer, Michael L.; Motil, Susan M.; Ginty, Carol A.

2014-01-01

As part of U.S. National Space Policy, NASA is seeking an innovative path for human space exploration, which strengthens the capability to extend human and robotic presence throughout the solar system. NASA is laying the groundwork to enable humans to safely reach multiple potential destinations, including asteroids, Lagrange points, the Moon and Mars. In support of this, NASA is embarking on the Technology Demonstration Mission Cryogenic Propellant Storage and Transfer (TDM CPST) Project to test and validate key cryogenic capabilities and technologies required for future exploration elements, opening up the architecture for large cryogenic propulsion stages (CPS) and propellant depots. The TDM CPST project will provide an on-orbit demonstration of the capability to store, transfer, and measure cryogenic propellants for a duration which is relevant to enable long term human space exploration missions beyond low Earth orbit (LEO). Recognizing that key cryogenic fluid management technologies anticipated for on-orbit (flight) demonstration needed to be matured to a readiness level appropriate for infusion into the design of the flight demonstration, the NASA Headquarters Space Technology Mission Directorate authorized funding for a one-year (FY12) ground based technology maturation program. The strategy, proposed by the CPST Project Manager, focused on maturation through modeling, studies, and ground tests of the storage and fluid transfer Cryogenic Fluid Management (CFM) technology sub-elements and components that were not already at a Technology Readiness Level (TRL) of 5. A technology maturation plan (TMP) was subsequently approved which described: the CFM technologies selected for maturation, the ground testing approach to be used, quantified success criteria of the technologies, hardware and data deliverables, and a deliverable to provide an assessment of the technology readiness after completion of the test, study or modeling activity. This paper will present the testing, studies, and modeling that occurred in FY12 to mature cryogenic fluid management technologies for propellant storage, transfer, and supply, to examine extensibility to full scale, long duration missions, and to develop and validate analytical models. Finally, the paper will briefly describe an upcoming test to demonstrate Liquid Oxygen (LO2) Zero Boil-Off (ZBO).

Cryogenic Propellant Storage and Transfer (CPST) Technology Maturation: Establishing a Foundation for a Technology Demonstration Mission (TDM)

NASA Technical Reports Server (NTRS)

Doherty, Michael P.; Meyer, Michael L.; Motil, Susan M.; Ginty, Carol A.

2013-01-01

As part of U.S. National Space Policy, NASA is seeking an innovative path for human space exploration, which strengthens the capability to extend human and robotic presence throughout the solar system. NASA is laying the groundwork to enable humans to safely reach multiple potential destinations, including asteroids, Lagrange points, the Moon and Mars. In support of this, NASA is embarking on the Technology Demonstration Mission Cryogenic Propellant Storage and Transfer (TDM CPST) Project to test and validate key cryogenic capabilities and technologies required for future exploration elements, opening up the architecture for large cryogenic propulsion stages (CPS) and propellant depots. The TDM CPST project will provide an on-orbit demonstration of the capability to store, transfer, and measure cryogenic propellants for a duration which is relevant to enable long term human space exploration missions beyond low Earth orbit (LEO). Recognizing that key cryogenic fluid management technologies anticipated for on-orbit (flight) demonstration needed to be matured to a readiness level appropriate for infusion into the design of the flight demonstration, the NASA Headquarters Space Technology Mission Directorate authorized funding for a one-year (FY12) ground based technology maturation program. The strategy, proposed by the CPST Project Manager, focused on maturation through modeling, studies, and ground tests of the storage and fluid transfer Cryogenic Fluid Management (CFM) technology sub-elements and components that were not already at a Technology Readiness Level (TRL) of 5. A technology maturation plan (TMP) was subsequently approved which described: the CFM technologies selected for maturation, the ground testing approach to be used, quantified success criteria of the technologies, hardware and data deliverables, and a deliverable to provide an assessment of the technology readiness after completion of the test, study or modeling activity. This paper will present the testing, studies, and modeling that occurred in FY12 to mature cryogenic fluid management technologies for propellant storage, transfer, and supply, to examine extensibility to full scale, long duration missions, and to develop and validate analytical models. Finally, the paper will briefly describe an upcoming test to demonstrate Liquid Oxygen (LO2) Zero Boil- Off (ZBO).

Emerging Technologies to Create Inducible and Genetically Defined Porcine Cancer Models

PubMed Central

Schook, Lawrence B.; Rund, Laurie; Begnini, Karine R.; Remião, Mariana H.; Seixas, Fabiana K.; Collares, Tiago

2016-01-01

There is an emerging need for new animal models that address unmet translational cancer research requirements. Transgenic porcine models provide an exceptional opportunity due to their genetic, anatomic, and physiological similarities with humans. Due to recent advances in the sequencing of domestic animal genomes and the development of new organism cloning technologies, it is now very feasible to utilize pigs as a malleable species, with similar anatomic and physiological features with humans, in which to develop cancer models. In this review, we discuss genetic modification technologies successfully used to produce porcine biomedical models, in particular the Cre-loxP System as well as major advances and perspectives the CRISPR/Cas9 System. Recent advancements in porcine tumor modeling and genome editing will bring porcine models to the forefront of translational cancer research. PMID:26973698

The Technology Acceptance Model for Resource-Limited Settings (TAM-RLS): A Novel Framework for Mobile Health Interventions Targeted to Low-Literacy End-Users in Resource-Limited Settings.

PubMed

Campbell, Jeffrey I; Aturinda, Isaac; Mwesigwa, Evans; Burns, Bridget; Santorino, Data; Haberer, Jessica E; Bangsberg, David R; Holden, Richard J; Ware, Norma C; Siedner, Mark J

2017-11-01

Although mobile health (mHealth) technologies have shown promise in improving clinical care in resource-limited settings (RLS), they are infrequently brought to scale. One limitation to the success of many mHealth interventions is inattention to end-user acceptability, which is an important predictor of technology adoption. We conducted in-depth interviews with 43 people living with HIV in rural Uganda who had participated in a clinical trial of a short messaging system (SMS)-based intervention designed to prompt return to clinic after an abnormal laboratory test. Interviews focused on established features of technology acceptance models, including perceived ease of use and perceived usefulness, and included open-ended questions to gain insight into unexplored issues related to the intervention's acceptability. We used conventional (inductive) and direct content analysis to derive categories describing use behaviors and acceptability. Interviews guided development of a proposed conceptual framework, the technology acceptance model for resource-limited settings (TAM-RLS). This framework incorporates both classic technology acceptance model categories as well as novel factors affecting use in this setting. Participants described how SMS message language, phone characteristics, and experience with similar technologies contributed to the system's ease of use. Perceived usefulness was shaped by the perception that the system led to augmented HIV care services and improved access to social support from family and colleagues. Emergent themes specifically related to mHealth acceptance among PLWH in Uganda included (1) the importance of confidentiality, disclosure, and stigma, and (2) the barriers and facilitators downstream from the intervention that impacted achievement of the system's target outcome. The TAM-RLS is a proposed model of mHealth technology acceptance based upon end-user experiences in rural Uganda. Although the proposed model requires validation, the TAM-RLS may serve as a useful tool to guide design and implementation of mHealth interventions.

ICT and OTs: a model of information and communication technology acceptance and utilisation by occupational therapists.

PubMed

Schaper, Louise K; Pervan, Graham P

2007-06-01

There is evidence to suggest that health professionals are reluctant to accept and utilise information and communication technologies (ICT) and concern is growing within health informatics research that this is contributing to the lag in adoption and utilisation of ICT across the health sector. Technology acceptance research within the field of information systems has been limited in its application to health and there is a concurrent need to develop and gain empirical support for models of technology acceptance within health and to examine acceptance and utilisation issues amongst health professionals to improve the success of information system implementation in this arena. This paper outlines a project that examines ICT acceptance and utilisation by Australian occupational therapists. It describes the theoretical basis behind the development of a research model and the methodology being employed to empirically validate the model using substantial quantitative, qualitative and longitudinal data. Preliminary results from Phase II of the study are presented. The theoretical significance of this work is that it uses a thoroughly constructed research model, with potentially the largest sample size ever tested, to extend technology acceptance research into the health sector.

Impact of Perceived Security on Organizational Adoption of Smartphones.

PubMed

Arpaci, Ibrahim; Yardimci Cetin, Yasemin; Turetken, Ozgur

2015-10-01

Organizational adoption of new technologies is a practically important research area. The present study aims to investigate the impact of perceived security on organizational adoption of mobile communication technologies, specifically smartphones. For this purpose, a research model is developed extending the Technology Acceptance Model (TAM). The research model is tested using a structural equation modeling based on data that were collected from senior managers of 201 private sector organizations in Turkey. The results show that, along with the traditional constructs of perceived ease of use and perceived usefulness, perceived security significantly affects organizations' adoption of smartphones. Both the theoretical and practical implications of these results are discussed.

A study on specialist or special disease clinics based on big data.

PubMed

Fang, Zhuyuan; Fan, Xiaowei; Chen, Gong

2014-09-01

Correlation analysis and processing of massive medical information can be implemented through big data technology to find the relevance of different factors in the life cycle of a disease and to provide the basis for scientific research and clinical practice. This paper explores the concept of constructing a big medical data platform and introduces the clinical model construction. Medical data can be collected and consolidated by distributed computing technology. Through analysis technology, such as artificial neural network and grey model, a medical model can be built. Big data analysis, such as Hadoop, can be used to construct early prediction and intervention models as well as clinical decision-making model for specialist and special disease clinics. It establishes a new model for common clinical research for specialist and special disease clinics.

Using a modified technology acceptance model in hospitals.

PubMed

Aggelidis, Vassilios P; Chatzoglou, Prodromos D

2009-02-01

The use of information technology in the health care sector and especially in hospitals offers great potential for improving the quality of services provided and the efficiency and effectiveness of the personnel, but also for reducing the organizational expenses. However, the main question that arises according to the literature is whether hospital personnel are willing to use state of the art information technology while performing their tasks. This study attempts to address this issue by developing and testing a modified technology acceptance model taking into consideration other relevant models found in the literature. The original TAM has been extended to include some exogenous variables in order to examine HIS acceptance by Greek hospital personnel. Correlation, explanatory and confirmation factor analysis was performed to test the reliability and validity of the measurement model. The structural equation modeling technique has also been used to evaluate the causal model. The results indicate that perceived usefulness, ease of use, social influence, attitude, facilitating conditions and self-efficacy significantly affect hospital personnel behavioral intention. Training has a strong indirect impact on behavioral intention through the mediators of facilitating condition and ease of use. Furthermore, the existence of significant positive effects between self-efficacy and social influence, perceived usefulness and anxiety, and facilitating conditions and social influence is also supported. The proposed model can explain 87% of the variance of behavioral intention indicating that the core constructs of the technology acceptance models have a strong and statistically significant influence on hospital personnel usage intention.

Elaboration of technology organizational models of constructing high-rise buildings in plans of construction organization

NASA Astrophysics Data System (ADS)

Osipenkova, Irina; Simankina, Tatyana; Syrygina, Taisiia; Lukinov, Vitaliy

2018-03-01

This article represents features of the elaboration of technology organizational models of high-rise building construction in technology organizational documentation on the example of the plan of construction organization. Some examples of enhancing the effectiveness of high-rise building construction based on developments of several options of the organizational and technological plan are examined. Qualitative technology organizational documentation allows to increase the competitiveness of construction companies and provides prime cost of construction and assembly works reductions. Emphasis is placed on the necessity to comply with the principle of comprehensiveness of engineering, scientific and research works, development activities and scientific and technical support.

Social and private benefits of assisted reproductive technology: a national survey-based evaluation in Israel.

PubMed

Gonen, Limor Dina

2016-01-01

The objective of this paper was to measure the private and social benefits resulting from technological advances in fertility treatment. An empirical model investigates the willingness-to-pay (WTP) for advances in the medical technology of in vitro fertilization (IVF) among the general public and among IVF patients in Israel. The empirical model's findings demonstrate that IVF patients and the general public value medical technology advances and have a positive WTP for it. The average WTP for IVF technology advances, among IVF patients, is US $3116.9 whereas for the general public it is US$2284.4. Available evidence suggests that advances in medical technology have delivered substantial benefits and appear to have contributed to improved wellbeing.

Parental perceptions of technology and technology-focused parenting: Associations with youth screen time

PubMed Central

Sanders, Wesley; Parent, Justin; Forehand, Rex; Sullivan, Alexandra D.W.; Jones, Deborah J.

2016-01-01

In the present study we propose a model linking parental perceptions of technology to technology-related parenting strategies to youth screen time, and, finally, to internalizing and externalizing problem behaviors. Participants were 615 parents drawn from three community samples of families with children across three developmental stages: young childhood, middle childhood, and adolescence. The model was tested at each stage with the strongest support emerging in the young childhood sample. One component of parental perceptions of technology, perceived efficacy, was related to technology-related parenting strategies across developmental stages. However, the association of these strategies to child screen time and, in turn, problem behaviors, diminished as children increased in age. Implications for intervention are considered. PMID:27795603

System approach to modeling of industrial technologies

NASA Astrophysics Data System (ADS)

Toropov, V. S.; Toropov, E. S.

2018-03-01

The authors presented a system of methods for modeling and improving industrial technologies. The system consists of information and software. The information part is structured information about industrial technologies. The structure has its template. The template has several essential categories used to improve the technological process and eliminate weaknesses in the process chain. The base category is the physical effect that takes place when the technical process proceeds. The programming part of the system can apply various methods of creative search to the content stored in the information part of the system. These methods pay particular attention to energy transformations in the technological process. The system application will allow us to systematize the approach to improving technologies and obtaining new technical solutions.

A Model to Predict Educators' Attitudes towards Technology and Thus Technology Adoption

ERIC Educational Resources Information Center

Govender, D. W.

2012-01-01

"Technology," the buzz word for the last ten to fifteen years in South Africa. Technology availability is quite often mistaken for technology adoption and use. Technology has been made available to almost all tertiary institutions and at least some public schools. However, in most tertiary institutions many professors still refuse to use…

The Coevolution of Society and Multimedia Technology: Issues in Predicting the Future Innovation and Use of a Ubiquitous Technology.

ERIC Educational Resources Information Center

Stewart, James; Williams, Robin

1998-01-01

Criticizes "technologically deterministic" approaches, which seek to extrapolate social change from technological potential. Shows how a three-layer model of component, system, and application technologies can be used to integrate findings from the use and development of technology in specific sectors. Examines three cases of…

Capacity Expansion Modeling for Storage Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Elaine; Stoll, Brady; Mai, Trieu

2017-04-03

The Resource Planning Model (RPM) is a capacity expansion model designed for regional power systems and high levels of renewable generation. Recent extensions capture value-stacking for storage technologies, including batteries and concentrating solar power with storage. After estimating per-unit capacity value and curtailment reduction potential, RPM co-optimizes investment decisions and reduced-form dispatch, accounting for planning reserves; energy value, including arbitrage and curtailment reduction; and three types of operating reserves. Multiple technology cost scenarios are analyzed to determine level of deployment in the Western Interconnection under various conditions.

A Portal of Educational Resources: Providing Evidence for Matching Pedagogy with Technology

ERIC Educational Resources Information Center

Di Blas, Nicoletta; Fiore, Alessandro; Mainetti, Luca; Vergallo, Roberto; Paolini, Paolo

2014-01-01

The TPACK (Technology, Pedagogy and Content Knowledge) model presents the three types of knowledge that are necessary to implement a successful technology-based educational activity. It highlights how the intersections between TPK (Technological Pedagogical Knowledge), PCK (Pedagogical Content Knowledge) and TCK (Technological Content Knowledge)…

Testing of technology readiness index model based on exploratory factor analysis approach

NASA Astrophysics Data System (ADS)

Ariani, AF; Napitupulu, D.; Jati, RK; Kadar, JA; Syafrullah, M.

2018-04-01

SMEs readiness in using ICT will determine the adoption of ICT in the future. This study aims to evaluate the model of technology readiness in order to apply the technology on SMEs. The model is tested to find if TRI model is relevant to measure ICT adoption, especially for SMEs in Indonesia. The research method used in this paper is survey to a group of SMEs in South Tangerang. The survey measures the readiness to adopt ICT based on four variables which is Optimism, Innovativeness, Discomfort, and Insecurity. Each variable contains several indicators to make sure the variable is measured thoroughly. The data collected through survey is analysed using factor analysis methodwith the help of SPSS software. The result of this study shows that TRI model gives more descendants on some indicators and variables. This result can be caused by SMEs owners’ knowledge is not homogeneous about either the technology that they are used, knowledge or the type of their business.

The role of modelling in prioritising and planning clinical trials.

PubMed

Chilcott, J; Brennan, A; Booth, A; Karnon, J; Tappenden, P

2003-01-01

To identify the role of modelling in planning and prioritising trials. The review focuses on modelling methods used in the construction of disease models and on methods for their analysis and interpretation. Searches were initially developed in MEDLINE and then translated into other databases. Systematic reviews of the methodological and case study literature were undertaken. Search strategies focused on the intersection between three domains: modelling, health technology assessment and prioritisation. The review found that modelling can extend the validity of trials by: generalising from trial populations to specific target groups; generalising to other settings and countries; extrapolating trial outcomes to the longer term; linking intermediate outcome measures to final outcomes; extending analysis to the relevant comparators; adjusting for prognostic factors in trials; and synthesising research results. The review suggested that modelling may offer greatest benefits where the impact of a technology occurs over a long duration, where disease/technology characteristics are not observable, where there are long lead times in research, or for rapidly changing technologies. It was also found that modelling can inform the key parameters for research: sample size, trial duration and population characteristics. One-way, multi-way and threshold sensitivity analysis have been used in informing these aspects but are flawed. The payback approach has been piloted and while there have been weaknesses in its implementation, the approach does have potential. Expected value of information analysis is the only existing methodology that has been applied in practice and can address all these issues. The potential benefit of this methodology is that the value of research is directly related to its impact on technology commissioning decisions, and is demonstrated in real and absolute rather than relative terms; it assesses the technical efficiency of different types of research. Modelling is not a substitute for data collection. However, modelling can identify trial designs of low priority in informing health technology commissioning decisions. Good practice in undertaking and reporting economic modelling studies requires further dissemination and support, specifically in sensitivity analyses, model validation and the reporting of assumptions. Case studies of the payback approach using stochastic sensitivity analyses should be developed. Use of overall expected value of perfect information should be encouraged in modelling studies seeking to inform prioritisation and planning of health technology assessments. Research is required to assess if the potential benefits of value of information analysis can be realised in practice; on the definition of an adequate objective function; on methods for analysing computationally expensive models; and on methods for updating prior probability distributions.

Unintended consequences of information technologies in health care--an interactive sociotechnical analysis.

PubMed

Harrison, Michael I; Koppel, Ross; Bar-Lev, Shirly

2007-01-01

Many unintended and undesired consequences of Healthcare Information Technologies (HIT) flow from interactions between the HIT and the healthcare organization's sociotechnical system-its workflows, culture, social interactions, and technologies. This paper develops and illustrates a conceptual model of these processes that we call Interactive Sociotechnical Analysis (ISTA). ISTA captures common types of interaction with special emphasis on recursive processes, i.e., feedback loops that alter the newly introduced HIT and promote second-level changes in the social system. ISTA draws on prior studies of unintended consequences, along with research in sociotechnical systems, ergonomics, social informatics, technology-in-practice, and social construction of technology. We present five types of sociotechnical interaction and illustrate each with cases from published research. The ISTA model should further research on emergent and recursive processes in HIT implementation and their unintended consequences. Familiarity with the model can also foster practitioners' awareness of unanticipated consequences that only become evident during HIT implementation.

The policy-dependent statistics and induced heterogeneity of the supported agents on the inter and intra company levels

NASA Astrophysics Data System (ADS)

Horváth, Denis; Maliková, Zuzana; Lučkaničová, Martina

2015-09-01

We present a simulation model of the technological innovations based on the former Guardiola's concept which relies on the notion of technological barriers. The central, novel feature of our proposal is the assumption that barriers can be reduced allowing public support to R&D. However, this can be applied under the different policies. The statistical treatment of the simulation results demonstrated that support of the elitist (super-threshold) innovating units yields higher innovation rate, but more profound variation of the technological levels. On the other hand, the favoring of innovators with sub-threshold technological levels may lead to the more integrated technological world. Simultaneously, we use the same model to study the effects of supporting knowledge sharing (that is to say, lowering sharing barriers) on average organizational knowledge. An interesting aspect of the model represents self-organized adjustment of the probabilistic parameters related to the social linkages.

Using the MCPLXS Generator for Technology Transfer

NASA Technical Reports Server (NTRS)

Moore, Arlene A.; Dean, Edwin B.

1987-01-01

The objective of this paper is to acquaint you with some of the approaches we are taking at Langley to incorporate escalations (or de-escalations) of technology when modeling futuristic systems. Since we have a short turnaround between the time we receive enough descriptive information to start estimating the project and when the estimate is needed (the "we-want-it-yesterday syndrome"), creativity is often necessary. There is not much time available for tool development. It is expedient to use existing tools in an adaptive manner to model the situation at hand. Specifically, this paper describes the use of the RCA PRICE MCPLXS Generator to incorporate technology transfer and technology escalation in estimates for advanced space systems such as Shuttle II and NASA advanced technology vehicles. It is assumed that the reader is familiar with the RCA PRICE family of models as well as the RCA PRICE utility programs such as SCPLX, PARAM, PARASYN, and the MCPLXS Generator.

Case Study of Apple, Inc. for Business Law Students: How Apple's Business Model Controls Digital Content through Legal and Technological Means

ERIC Educational Resources Information Center

Reder, Margo E. K.

2009-01-01

This article describes a six-week long exercise that incorporates a dynamic learning approach into an e-commerce or Internet technology business law elective course; the exercise pursues an entrepreneurial approach to the use of an appropriate business model by emphasizing the interaction between technology, business, and law. This active learning…

Using Mobile Technology in an Urban High School to Decrease Adult Prompting during in School Transitions for Students Identified with Intellectual Disabilities

ERIC Educational Resources Information Center

Christman, Jennifer T.

2013-01-01

The aim of this study was to examine the application of video modeling on mobile technology to increase efficiency in the classroom for students identified with intellectual disabilities. Specially, this study sought to identify if video modeling on mobile technology could decrease adult prompting for students with intellectual disabilities during…

Army Systems Engineering Career Development Model

DTIC Science & Technology

2014-01-30

Army Systems Engineering Career Development Model Interim Technical Report SERC -2014-TR-042-1 January 30, 2014 Principal Investigators Dr. Val...Gavito, Stevens Institute of Technology Dr. Michael Pennotti, Stevens Institute of Technology Task Order 004, RT 104 Report No. SERC -2014-TR-042-1...Institute of Technology 8. PERFORMING ORGANIZATION REPORT NUMBER SERC -2014-TR-042-1 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) DASD

Modeling Technology Preparedness as an Antecedent of Mathematic Pre-Service Teachers' Self Efficacy, Perceived Usefulness and Intention toward Use of Information Technology in Nigeria

ERIC Educational Resources Information Center

Shittu, Ahmed Tajudeen; Gambari, Amosa Isiaka; Gimba, W. Rahmatu; Ahmed, Hassan

2016-01-01

This study test a specified model of information technology (IT) preparedness as antecedent of pre-service teachers' self efficacy, perceived usefulness, and intention toward IT use for teaching in Nigeria. Survey method was employed for prosecuting the study. The participants of the study comprise of 200 pre-service teachers studying Mathematics…

An Assessment of the Influence of Perceived Enjoyment and Attitude on the Intention to Use Technology among Pre-Service Teachers: A Structural Equation Modeling Approach

ERIC Educational Resources Information Center

Teo, Timothy; Noyes, Jan

2011-01-01

This study examined the influence of perceived enjoyment on pre-service teachers' intention to use technology, in addition to re-appraising the role of attitude toward use in the Technology Acceptance Model (TAM; Davis, Bagozzi, & Warshaw, 1989). One hundred and fifty-three participants in Singapore completed a survey questionnaire measuring…

Modeling the User for Education, Training, and Performance Aiding

DTIC Science & Technology

2003-11-01

Eds.) Technology applications in education : A learning view (pp. 79–99). Hillsdale, NJ: Lawrence Erlbaum Associates. Fletcher, J.D. and Johnston, R...2003 symposium on Advanced Technologies for Military Training. v CONTENTS MODELING THE USER FOR EDUCATION , TRAINING, AND PERFORMANCE AIDING EXECUTIVE...using computer technology for education , training, decision-making, and performance aiding. Our focus is on the digital representation of these users

Cooling Technology for Large Space Telescopes

NASA Technical Reports Server (NTRS)

DiPirro, Michael; Cleveland, Paul; Durand, Dale; Klavins, Andy; Muheim, Daniella; Paine, Christopher; Petach, Mike; Tenerelli, Domenick; Tolomeo, Jason; Walyus, Keith

2007-01-01

NASA's New Millennium Program funded an effort to develop a system cooling technology, which is applicable to all future infrared, sub-millimeter and millimeter cryogenic space telescopes. In particular, this technology is necessary for the proposed large space telescope Single Aperture Far-Infrared Telescope (SAFIR) mission. This technology will also enhance the performance and lower the risk and cost for other cryogenic missions. The new paradigm for cooling to low temperatures will involve passive cooling using lightweight deployable membranes that serve both as sunshields and V-groove radiators, in combination with active cooling using mechanical coolers operating down to 4 K. The Cooling Technology for Large Space Telescopes (LST) mission planned to develop and demonstrate a multi-layered sunshield, which is actively cooled by a multi-stage mechanical cryocooler, and further the models and analyses critical to scaling to future missions. The outer four layers of the sunshield cool passively by radiation, while the innermost layer is actively cooled to enable the sunshield to decrease the incident solar irradiance by a factor of more than one million. The cryocooler cools the inner layer of the sunshield to 20 K, and provides cooling to 6 K at a telescope mounting plate. The technology readiness level (TRL) of 7 will be achieved by the active cooling technology following the technology validation flight in Low Earth Orbit. In accordance with the New Millennium charter, tests and modeling are tightly integrated to advance the technology and the flight design for "ST-class" missions. Commercial off-the-shelf engineering analysis products are used to develop validated modeling capabilities to allow the techniques and results from LST to apply to a wide variety of future missions. The LST mission plans to "rewrite the book" on cryo-thermal testing and modeling techniques, and validate modeling techniques to scale to future space telescopes such as SAFIR.

Using Parametric Cost Models to Estimate Engineering and Installation Costs of Selected Electronic Communications Systems

DTIC Science & Technology

1994-09-01

Institute of Technology, Wright- Patterson AFB OH, January 1994. 4. Neter, John and others. Applied Linear Regression Models. Boston: Irwin, 1989. 5...Technology, Wright-Patterson AFB OH 5 April 1994. 29. Neter, John and others. Applied Linear Regression Models. Boston: Irwin, 1989. 30. Office of

Changing Models for Researching Pedagogy with Information and Communications Technologies

ERIC Educational Resources Information Center

Webb, M.

2013-01-01

This paper examines changing models of pedagogy by drawing on recent research with teachers and their students as well as theoretical developments. In relation to a participatory view of learning, the paper reviews existing pedagogical models that take little account of the use of information and communications technologies as well as those that…

The Conceptualization of the Mathematical Modelling Process in Technology-Aided Environment

ERIC Educational Resources Information Center

Hidiroglu, Çaglar Naci; Güzel, Esra Bukova

2017-01-01

The aim of the study is to conceptualize the technology-aided mathematical modelling process in the frame of cognitive modelling perspective. The grounded theory approach was adopted in the study. The research was conducted with seven groups consisting of nineteen prospective mathematics teachers. The data were collected from the video records of…

Performance Technology--Not a One-Size-Fits-All Profession

ERIC Educational Resources Information Center

Dierkes, Sunda V.

2012-01-01

The current debate over whether to choose just one universal human performance technology (HPT) model, in particular Langdon's language of work (LOW) model, promises a shared understanding among HPT professionals, credibility for the HPT profession, and a return on investment of time and effort in developing performance models over more than 70…

Examining the Technology Integration Planning Cycle Model of Professional Development to Support Teachers' Instructional Practices

ERIC Educational Resources Information Center

Hutchison, Amy C.; Woodward, Lindsay

2018-01-01

Background: Presently, models of professional development aimed at supporting teachers' technology integration efforts are often short and decontextualized. With many schools across the country utilizing standards that require students to engage with digital tools, a situative model that supports building teachers' knowledge within their…

Kentucky Migrant Technology Project: External Evaluation Report, 1997-98.

ERIC Educational Resources Information Center

Popp, Robert J.

During its first year of operation (1997-98), the Kentucky Migrant Technology Project successfully implemented its model, used internal and external evaluations to inform improvement of the model, and began plans for expansion into new service areas. This evaluation report is organized around five questions that focus on the project model and its…

Online Professional Development: Combining Best Practices from Teacher, Technology and Distance Education

ERIC Educational Resources Information Center

Signer, Barbara

2008-01-01

This article provides a model of online professional development that is consistent with recommendations from the fields of teacher education, technology staff development and online learning. A graduate mathematics education course designed and implemented using the model is presented to exemplify the model's core components and interactions. The…

Mouse Xenograft Model for Mesothelioma | NCI Technology Transfer Center | TTC

Cancer.gov

The National Cancer Institute is seeking parties interested in collaborative research to co-develop, evaluate, or commercialize a new mouse model for monoclonal antibodies and immunoconjugates that target malignant mesotheliomas. Applications of the technology include models for screening compounds as potential therapeutics for mesothelioma and for studying the pathology of mesothelioma.

Forecasting the Impact of Technological Change on Manpower Utilization and Displacement: An Analytic Summary.

ERIC Educational Resources Information Center

Fechter, Alan

Obstacles to producing forecasts of the impact of technological change and skill utilization are briefly discussed, and existing models for forecasting manpower requirements are described and analyzed. A survey of current literature reveals a concentration of models for producing long-range national forecasts, but few models for generating…

A Causal Model of Teacher Acceptance of Technology

ERIC Educational Resources Information Center

Chang, Jui-Ling; Lieu, Pang-Tien; Liang, Jung-Hui; Liu, Hsiang-Te; Wong, Seng-lee

2012-01-01

This study proposes a causal model for investigating teacher acceptance of technology. We received 258 effective replies from teachers at public and private universities in Taiwan. A questionnaire survey was utilized to test the proposed model. The Lisrel was applied to test the proposed hypotheses. The result shows that computer self-efficacy has…

A Model for Discussing the Quality of Technology-Enhanced Learning in Blended Learning Programmes

ERIC Educational Resources Information Center

Casanova, Diogo; Moreira, António

2017-01-01

This paper presents a comprehensive model for supporting informed and critical discussions concerning the quality of Technology-Enhanced Learning in Blended Learning programmes. The model aims to support discussions around domains such as how institutions are prepared, the participants' background and expectations, the course design, and the…

Common Object Library Description

DTIC Science & Technology

2012-08-01

Information Modeling ( BIM ) technology to be successful, it must be consistently applied across many projects, by many teams. The National Building Information ...distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT For Building Information Modeling ( BIM ) technology to be successful, it must be... BIM standards and for future research projects. 15. SUBJECT TERMS building information modeling ( BIM ), object

Climate Model Diagnostic Analyzer Web Service System

NASA Astrophysics Data System (ADS)

Lee, S.; Pan, L.; Zhai, C.; Tang, B.; Kubar, T. L.; Li, J.; Zhang, J.; Wang, W.

2015-12-01

Both the National Research Council Decadal Survey and the latest Intergovernmental Panel on Climate Change Assessment Report stressed the need for the comprehensive and innovative evaluation of climate models with the synergistic use of global satellite observations in order to improve our weather and climate simulation and prediction capabilities. The abundance of satellite observations for fundamental climate parameters and the availability of coordinated model outputs from CMIP5 for the same parameters offer a great opportunity to understand and diagnose model biases in climate models. In addition, the Obs4MIPs efforts have created several key global observational datasets that are readily usable for model evaluations. However, a model diagnostic evaluation process requires physics-based multi-variable comparisons that typically involve large-volume and heterogeneous datasets, making them both computationally- and data-intensive. In response, we have developed a novel methodology to diagnose model biases in contemporary climate models and implementing the methodology as a web-service based, cloud-enabled, provenance-supported climate-model evaluation system. The evaluation system is named Climate Model Diagnostic Analyzer (CMDA), which is the product of the research and technology development investments of several current and past NASA ROSES programs. The current technologies and infrastructure of CMDA are designed and selected to address several technical challenges that the Earth science modeling and model analysis community faces in evaluating and diagnosing climate models. In particular, we have three key technology components: (1) diagnostic analysis methodology; (2) web-service based, cloud-enabled technology; (3) provenance-supported technology. The diagnostic analysis methodology includes random forest feature importance ranking, conditional probability distribution function, conditional sampling, and time-lagged correlation map. We have implemented the new methodology as web services and incorporated the system into the Cloud. We have also developed a provenance management system for CMDA where CMDA service semantics modeling, service search and recommendation, and service execution history management are designed and implemented.

Mine Burial Assessment State-of the Art in Prediction and Modeling Workshop and Initiation of Technical Program

DTIC Science & Technology

2000-09-30

Burial Assessment State-of-the Art Science , Technology, and Modeling. A Review of Coastal Research, Modeling, and Naval Operational Needs in Shallow Water...the ONR Mine Burial Prediction Program are summarized below. 1) Completed comprehensive technical reports: a. Mine Burial Assessment, State-of-the Art ... Science , Technology, and Modeling. A review of Coastal Research, Modeling, and Naval Operational Needs in Shallow Water Environments with

4-Stage Online Presence Model: Model for Module Design and Delivery Using Web 2.0 Technologies to Facilitate Critical Thinking Skills

ERIC Educational Resources Information Center

Goh, WeiWei; Dexter, Barbara; Self, Richard

2014-01-01

The main purpose of this paper is to present a conceptual model for the use of web 2.0 online technologies in order to develop and enhance students' critical thinking skills at higher education level. Wiki is chosen as the main focus in this paper. The model integrates Salmon's 5-stage model (Salmon, 2002) with Garrison's Community of Inquiry…

The Behavioral Intervention Technology Model: An Integrated Conceptual and Technological Framework for eHealth and mHealth Interventions

PubMed Central

Schueller, Stephen M; Montague, Enid; Burns, Michelle Nicole; Rashidi, Parisa

2014-01-01

A growing number of investigators have commented on the lack of models to inform the design of behavioral intervention technologies (BITs). BITs, which include a subset of mHealth and eHealth interventions, employ a broad range of technologies, such as mobile phones, the Web, and sensors, to support users in changing behaviors and cognitions related to health, mental health, and wellness. We propose a model that conceptually defines BITs, from the clinical aim to the technological delivery framework. The BIT model defines both the conceptual and technological architecture of a BIT. Conceptually, a BIT model should answer the questions why, what, how (conceptual and technical), and when. While BITs generally have a larger treatment goal, such goals generally consist of smaller intervention aims (the "why") such as promotion or reduction of specific behaviors, and behavior change strategies (the conceptual "how"), such as education, goal setting, and monitoring. Behavior change strategies are instantiated with specific intervention components or “elements” (the "what"). The characteristics of intervention elements may be further defined or modified (the technical "how") to meet the needs, capabilities, and preferences of a user. Finally, many BITs require specification of a workflow that defines when an intervention component will be delivered. The BIT model includes a technological framework (BIT-Tech) that can integrate and implement the intervention elements, characteristics, and workflow to deliver the entire BIT to users over time. This implementation may be either predefined or include adaptive systems that can tailor the intervention based on data from the user and the user’s environment. The BIT model provides a step towards formalizing the translation of developer aims into intervention components, larger treatments, and methods of delivery in a manner that supports research and communication between investigators on how to design, develop, and deploy BITs. PMID:24905070

The behavioral intervention technology model: an integrated conceptual and technological framework for eHealth and mHealth interventions.

PubMed

Mohr, David C; Schueller, Stephen M; Montague, Enid; Burns, Michelle Nicole; Rashidi, Parisa

2014-06-05

A growing number of investigators have commented on the lack of models to inform the design of behavioral intervention technologies (BITs). BITs, which include a subset of mHealth and eHealth interventions, employ a broad range of technologies, such as mobile phones, the Web, and sensors, to support users in changing behaviors and cognitions related to health, mental health, and wellness. We propose a model that conceptually defines BITs, from the clinical aim to the technological delivery framework. The BIT model defines both the conceptual and technological architecture of a BIT. Conceptually, a BIT model should answer the questions why, what, how (conceptual and technical), and when. While BITs generally have a larger treatment goal, such goals generally consist of smaller intervention aims (the "why") such as promotion or reduction of specific behaviors, and behavior change strategies (the conceptual "how"), such as education, goal setting, and monitoring. Behavior change strategies are instantiated with specific intervention components or "elements" (the "what"). The characteristics of intervention elements may be further defined or modified (the technical "how") to meet the needs, capabilities, and preferences of a user. Finally, many BITs require specification of a workflow that defines when an intervention component will be delivered. The BIT model includes a technological framework (BIT-Tech) that can integrate and implement the intervention elements, characteristics, and workflow to deliver the entire BIT to users over time. This implementation may be either predefined or include adaptive systems that can tailor the intervention based on data from the user and the user's environment. The BIT model provides a step towards formalizing the translation of developer aims into intervention components, larger treatments, and methods of delivery in a manner that supports research and communication between investigators on how to design, develop, and deploy BITs.

When Future Change Matters: Modeling Future Price and Diffusion in Health Technology Assessments of Medical Devices.

PubMed

Grimm, Sabine E; Dixon, Simon; Stevens, John W

Health technology assessments (HTAs) that take account of future price changes have been examined in the literature, but the important issue of price reductions that are generated by the reimbursement decision has been ignored. To explore the impact of future price reductions caused by increasing uptake on HTAs and decision making for medical devices. We demonstrate the use of a two-stage modeling approach to derive estimates of technology price as a consequence of changes in technology uptake over future periods on the basis of existing theory and supported by empirical studies. We explore the impact on cost-effectiveness and expected value of information analysis in an illustrative example on the basis of a technology in development for preterm birth screening. The application of our approach to the case study technology generates smaller incremental cost-effectiveness ratios compared with the commonly used single cohort approach. The extent of this reduction in the incremental cost-effectiveness ratio depends on the magnitude of the modeled price reduction, the speed of diffusion, and the length of the assumed technology life horizon. Results of value of information analysis are affected through changes in the expected net benefit calculation, the addition of uncertain parameters, and the diffusion-adjusted estimate of the affected patient population. Because modeling future changes in price and uptake has the potential to affect HTA outcomes, modeling techniques that can address such changes should be considered for medical devices that may otherwise be rejected. Copyright © 2016 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The Influence of Curriculum, Instruction, Technology, and Social Interactions on Two Fifth-Grade Students' Epistemologies in Modeling Throughout a Model-Based Curriculum Unit

NASA Astrophysics Data System (ADS)

Baek, Hamin; Schwarz, Christina V.

2015-04-01

In the past decade, reform efforts in science education have increasingly attended to engaging students in scientific practices such as scientific modeling. Engaging students in scientific modeling can help them develop their epistemologies by allowing them to attend to the roles of mechanism and empirical evidence when constructing and revising models. In this article, we present our in-depth case study of how two fifth graders—Brian and Joon—who were students in a public school classroom located in a Midwestern state shifted their epistemologies in modeling as they participated in the enactment of a technologically enhanced, model-based curriculum unit on evaporation and condensation. First, analyses of Brian's and Joon's models indicate that their epistemologies in modeling related to explanation and empirical evidence shifted productively throughout the unit. Additionally, while their initial and final epistemologies in modeling were similar, the pathways in which their epistemologies in modeling shifted differed. Next, analyses of the classroom activities illustrate how various components of the learning ecology including technological tools, the teacher's scaffolding remarks, and students' collective activities and conversations, were marshaled in the service of the two students' shifting epistemologies in modeling. These findings suggest a nuanced view of individual learners' engagement in scientific modeling, their epistemological shifts in the practice, and the roles of technology and other components of a modeling-oriented learning environment for such shifts.

A longitudinal cross-level model of leader and salesperson influences on sales force technology use and performance.

PubMed

Mathieu, John; Ahearne, Michael; Taylor, Scott R

2007-03-01

The authors examined the influence of the introduction of a new suite of technology tools on the performance of 592 salespersons. They hypothesized that the salespersons' work experience would have a negative effect on their technology self-efficacy, which in turn would relate positively to their use of technology. Sales performance was hypothesized to be positively related to both past performance and the use of new technology tools. Further, the authors hypothesized that leaders' commitment to sales technology would enhance salespersons' technology self-efficacy and usage, and leaders' empowering behaviors would influence salespersons' technology self-efficacy and moderate the individual-level relationships. Hierarchical linear modeling analyses confirmed all of the hypothesized individual-level relationships and most of the cross-level relationships stemming from average leader behaviors. In particular, empowering leadership exhibited multiple cross-level interactions, as anticipated. Results are discussed in terms of the importance of social-psychological factors related to the success of sales force technology interventions. (c) 2007 APA, all rights reserved.

Advanced Technology for Portable Personal Visualization.

DTIC Science & Technology

1992-06-01

interactive radiosity . 6 Advanced Technology for Portable Personal Visualization Progress Report January-June 1992 9 2.5 Virtual-Environment Ultrasound...the system, with support for textures, model partitioning, more complex radiosity emitters, and the replacement of model parts with objects from our...model libraries. "* Add real-time, interactive radiosity to the display program on Pixel-Planes 5. "* Move the real-time model mesh-generation to the

Scalable Power-Component Models for Concept Testing

DTIC Science & Technology

2011-08-17

Scalable Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release 2011 NDIA GROUND VEHICLE...Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release Page 2 of 8 technology that has yet...Technology Symposium (GVSETS) Scalable Power-Component Models for Concept Testing, Mazzola, et al . UNCLASSIFIED: Dist A. Approved for public release

Transaction-neutral implanted data collection interface as EMR driver: a model for emerging distributed medical technologies.

PubMed

Lorence, Daniel; Sivaramakrishnan, Anusha; Richards, Michael

2010-08-01

Electronic Medical Record (EMR) and Electronic Health Record (EHR) adoption continues to lag across the US. Cost, inconsistent formats, and concerns about control of patient information are among the most common reasons for non-adoption in physician practice settings. The emergence of wearable and implanted mobile technologies, employed in distributed environments, promises a fundamentally different information infrastructure, which could serve to minimize existing adoption resistance. Proposed here is one technology model for overcoming adoption inconsistency and high organization-specific implementation costs, using seamless, patient controlled data collection. While the conceptual applications employed in this technology set are provided by way of illustration, they may also serve as a transformative model for emerging EMR/EHR requirements.

Scalable Entity-Based Modeling of Population-Based Systems, Final LDRD Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cleary, A J; Smith, S G; Vassilevska, T K

2005-01-27

The goal of this project has been to develop tools, capabilities and expertise in the modeling of complex population-based systems via scalable entity-based modeling (EBM). Our initial focal application domain has been the dynamics of large populations exposed to disease-causing agents, a topic of interest to the Department of Homeland Security in the context of bioterrorism. In the academic community, discrete simulation technology based on individual entities has shown initial success, but the technology has not been scaled to the problem sizes or computational resources of LLNL. Our developmental emphasis has been on the extension of this technology to parallelmore » computers and maturation of the technology from an academic to a lab setting.« less

Development of modelling algorithm of technological systems by statistical tests

NASA Astrophysics Data System (ADS)

Shemshura, E. A.; Otrokov, A. V.; Chernyh, V. G.

2018-03-01

The paper tackles the problem of economic assessment of design efficiency regarding various technological systems at the stage of their operation. The modelling algorithm of a technological system was performed using statistical tests and with account of the reliability index allows estimating the level of machinery technical excellence and defining the efficiency of design reliability against its performance. Economic feasibility of its application shall be determined on the basis of service quality of a technological system with further forecasting of volumes and the range of spare parts supply.

Transforming home health nursing with telehealth technology.

PubMed

Farrar, Francisca Cisneros

2015-06-01

Telehealth technology is an evidence-based delivery model tool that can be integrated into the plan of care for mental health patients. Telehealth technology empowers access to health care, can help decrease or prevent hospital readmissions, assist home health nurses provide shared decision making, and focuses on collaborative care. Telehealth and the recovery model have transformed the role of the home health nurse. Nurses need to be proactive and respond to rapidly emerging technologies that are transforming their role in home care. Copyright © 2015 Elsevier Inc. All rights reserved.

Business models for implementing geospatial technologies in transportation decision-making

DOT National Transportation Integrated Search

2007-03-31

This report describes six State DOTs business models for implementing geospatial technologies. It provides a comparison of the organizational factors influencing how Arizona DOT, Delaware DOT, Georgia DOT, Montana DOT, North Carolina DOT, and Okla...

Technology based transportation solutions : model deployment initiative

DOT National Transportation Integrated Search

1997-08-01

The Model Deployment Initiative provides real-life examples of technologys potential in metropolitan areas across the country. Investments from public and private sector partners will integrate existing ITS elements in the four sites as part of a ...

Lumped Parameter Model (LPM) for Light-Duty Vehicles

EPA Pesticide Factsheets

EPA’s Lumped Parameter Model (LPM) is a free, desktop computer application that estimates the effectiveness (CO2 Reduction) of various technology combinations or “packages,” in a manner that accounts for synergies between technologies.