The Effect of Multitasking to Faculty Members' Academic Works

ERIC Educational Resources Information Center

Baran, Bahar

2013-01-01

Faculty members in higher education institutions which technology produced in and used actively try to overcome simultaneous one more works because of their intensive works and responsibilities. This study associated simultaneously doing one more academic works to multitasking. Multitasking may have a detrimental effect on academic works since it…

Driving technology for improving motion quality of active-matrix organic light-emitting diode display

NASA Astrophysics Data System (ADS)

Kim, Jongbin; Kim, Minkoo; Kim, Jong-Man; Kim, Seung-Ryeol; Lee, Seung-Woo

2014-09-01

This paper reports transient response characteristics of active-matrix organic light emitting diode (AMOLED) displays for mobile applications. This work reports that the rising responses look like saw-tooth waveform and are not always faster than those of liquid crystal displays. Thus, a driving technology is proposed to improve the rising transient responses of AMOLED based on the overdrive (OD) technology. We modified the OD technology by combining it with a dithering method because the conventional OD method cannot successfully enhance all the rising responses. Our method can improve all the transitions of AMOLED without modifying the conventional gamma architecture of drivers. A new artifact is found when OD is applied to certain transitions. We propose an optimum OD selection method to mitigate the artifact. The implementation results show the proposed technology can successfully improve motion quality of scrolling texts as well as moving pictures in AMOLED displays.

78 FR 67418 - National Plan for Civil Earth Observations; Request for Information

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... OFFICE OF SCIENCE AND TECHNOLOGY POLICY National Plan for Civil Earth Observations; Request for... response to this Notice will inform the Office of Science and Technology Policy (OSTP) as it works with...-6071. Mail: Office of Science and Technology Policy, 1650 Pennsylvania Avenue NW., Washington, DC...

The Impact of Computer Technology on the Family.

ERIC Educational Resources Information Center

Bailey, Anne Wiseman

1982-01-01

Computer technology as it affects home and family life is explored. Elements of this technology which are examined include electronic fund transfers (EFT), consumer rights and responsibilities relating to use of EFT, working at home via computer, housing design, costs of computerizing the home, and computerized aids for the handicapped. (CT)

Capability Investment Strategy to Enable JPL Future Space Missions

NASA Technical Reports Server (NTRS)

Lincoln, William; Merida, Sofia; Adumitroaie, Virgil; Weisbin, Charles R.

2006-01-01

The Jet Propulsion Laboratory (JPL) formulates and conducts deep space missions for NASA (the National Aeronautics and Space Administration). The Chief Technologist of JPL has responsibility for strategic planning of the laboratory's advanced technology program to assure that the required technological capabilities to enable future missions are ready as needed. The responsibilities include development of a Strategic Plan (Antonsson, E., 2005). As part of the planning effort, a structured approach to technology prioritization, based upon the work of the START (Strategic Assessment of Risk and Technology) (Weisbin, C.R., 2004) team, was developed. The purpose of this paper is to describe this approach and present its current status relative to the JPL technology investment.

Work demands and health consequences of organizational and technological measures introduced to enhance the quality of home care services--A subgroup analysis.

PubMed

Andersen, Gunn Robstad; Bendal, Synne; Westgaard, Rolf H

2015-11-01

This study of home care workers in a Norwegian municipality aimed to examine the effect of two measures involving organizational (job checklists) and technological (personal digital assistants) job aids on perceived work demands and musculoskeletal health. Questionnaire data was collected in 2009 (n = 138, response rate 76.2%) and 2011 (n = 80, response rate 54%). Forty-six home care workers responded at both waves. Respondents were assigned into 'high', 'moderate' and 'low' strain groups based on their responses to open and closed survey questions regarding impact of the two measures. One-way ANOVA with post-hoc t-tests and regression analyses investigated group differences and examined development in variables. Perceived work demands and health effects over the two-year study period were unchanged overall, yet significant differences between subgroups were highlighted. Work demands and shoulder-neck pain remained high for high-strain workers, but were reduced for low and moderate strain workers. Management should be aware of diversity in worker responses to rationalizations and give priority to supplementary, targeted measures to counteract adverse effects. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

2008 annual merit review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2009-01-18

The 2008 DOE Vehicle Technologies Program Annual Merit Review was held February 25-28, 2008 in Bethesda, Maryland. The review encompassed all of the work done by the Vehicle Technologies Program: a total of 280 individual activities were reviewed, by a total of just over 100 reviewers. A total of 1,908 individual review responses were received for the technical reviews, and an additional 29 individual review responses were received for the plenary session review.

Engineers and Active Responsibility.

PubMed

Pesch, Udo

2015-08-01

Knowing that technologies are inherently value-laden and systemically interwoven with society, the question is how individual engineers can take up the challenge of accepting the responsibility for their work? This paper will argue that engineers have no institutional structure at the level of society that allows them to recognize, reflect upon, and actively integrate the value-laden character of their designs. Instead, engineers have to tap on the different institutional realms of market, science, and state, making their work a 'hybrid' activity combining elements from the different institutional realms. To deal with this institutional hybridity, engineers develop routines and heuristics in their professional network, which do not allow societal values to be expressed in a satisfactory manner. To allow forms of 'active' responsibility, there have to be so-called 'accountability forums' that guide moral reflections of individual actors. The paper will subsequently look at the methodologies of value-sensitive design (VSD) and constructive technology assessment (CTA) and explore whether and how these methodologies allow engineers to integrate societal values into the design technological artifacts and systems. As VSD and CTA are methodologies that look at the process of technological design, whereas the focus of this paper is on the designer, they can only be used indirectly, namely as frameworks which help to identify the contours of a framework for active responsibility of engineers.

Workforce 2000. A Bibliography.

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Center for Instructional Development and Services.

This bibliography contains citations locating information about the future U.S. work force. Because of demographic, economic, and technological developments, significant changes are predicted in both the nature of work and the composition of the work force by the year 2000. Projections, viewpoints, and suggested responses to these changes from…

Labor Substitution in Philippine Rice Farming Systems: An Analysis of Gender Work Roles.

ERIC Educational Resources Information Center

Tisch, S. J.; Paris, T. R.

1994-01-01

Examines the effects of rice technology adoption on gender work roles of husbands and wives in four Philippine villages. Results indicate that work roles are more fluid than suspected and labor substitution occurs between husbands and wives in response to economic opportunities. (SV)

Education, Training and Work. Some Commonwealth Responses to Youth Unemployment.

ERIC Educational Resources Information Center

Commonwealth Secretariat, London (England).

This report documents programs linking education and work in the Commonwealth of Nations. It contains four parts: "Learning about Science and Technology Outside School: Project Review" (Keith Lewin, Roger Jones); "Education and Productive Work Linkages in the Formal and Non-Formal Educational Systems of the Commonwealth…

Not Working: Unskilled Youth and Displaced Adults. A Look at the Demographic, Technological, and Educational Causes of Youth and Adult Unemployment and at Some Program Responses of the Ford Foundation. A Working Paper.

ERIC Educational Resources Information Center

Ford Foundation, New York, NY.

While minority youth and adults have traditionally experienced high rates of unemployment, recent demographic, educational, and technological changes have all combined to cause a sharp increase in the numbers of unemployed and displaced minority group workers. A review of past employment and training programs such as the Comprehensive Employment…

Research and Technology

NASA Technical Reports Server (NTRS)

1997-01-01

As the NASA Center responsible for preparing and launching space missions, the John F. Kennedy Space Center (KSC) is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the entire KSC team, consisting of Government and contractor personnel, working in partnership with academic institutions and commercial industry. This edition of the KSC Research and Technology 1997 Annual Report covers the efforts of these contributors to the KSC advanced technology development program, as well as our technology transfer activities.

Research and technology: 1994 annual report of the John F. Kennedy Space Center

NASA Technical Reports Server (NTRS)

1994-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1994 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. The Technology Programs and Commercialization Office (DE-TPO), (407) 867-3017, is responsible for publication of this report and should be contacted for any desired information regarding the advanced technology program.

How different types of users develop trust in technology: A qualitative analysis of the antecedents of active and passive user trust in a shared technology

PubMed Central

Xu, Jie; Le, Kim; Deitermann, Annika; Montague, Enid

2014-01-01

The aim of this study was to investigate the antecedents of trust in technology for active users and passive users working with a shared technology. According to the prominence-interpretation theory, to assess the trustworthiness of a technology, a person must first perceive and evaluate elements of the system that includes the technology. An experimental study was conducted with 54 participants who worked in two-person teams in a multi-task environment with a shared technology. Trust in technology was measured using a trust in technology questionnaire and antecedents of trust were elicited using an open-ended question. A list of antecedents of trust in technology was derived using qualitative analysis techniques. The following categories emerged from the antecedent: technology factors, user factors, and task factors. Similarities and differences between active users and passive user responses, in terms of trust in technology were discussed. PMID:24882059

How different types of users develop trust in technology: a qualitative analysis of the antecedents of active and passive user trust in a shared technology.

PubMed

Xu, Jie; Le, Kim; Deitermann, Annika; Montague, Enid

2014-11-01

The aim of this study was to investigate the antecedents of trust in technology for active users and passive users working with a shared technology. According to the prominence-interpretation theory, to assess the trustworthiness of a technology, a person must first perceive and evaluate elements of the system that includes the technology. An experimental study was conducted with 54 participants who worked in two-person teams in a multi-task environment with a shared technology. Trust in technology was measured using a trust in technology questionnaire and antecedents of trust were elicited using an open-ended question. A list of antecedents of trust in technology was derived using qualitative analysis techniques. The following categories emerged from the antecedent: technology factors, user factors, and task factors. Similarities and differences between active users and passive user responses, in terms of trust in technology were discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Medical robotics: the impact on perioperative nursing practice.

PubMed

Francis, Paula; Winfield, Howard N

2006-04-01

Robotic technology and the increased use of minimally invasive surgery approaches is altering the environment in which operating room personnel work and affecting how nurses must care for patients. An understanding of the history of robotics, current applications of the technology, and perioperative nursing responsibilities is needed to assure quality patient care in the wake of continued advances in technology.

High Speed Research Program Structural Acoustics Multi-Year Summary Report

NASA Technical Reports Server (NTRS)

Beier, Theodor H.; Bhat, Waman V.; Rizzi, Stephen A.; Silcox, Richard J.; Simpson, Myles A.

2005-01-01

This report summarizes the work conducted by the Structural Acoustics Integrated Technology Development (ITD) Team under NASA's High Speed Research (HSR) Phase II program from 1993 to 1999. It is intended to serve as a reference for future researchers by documenting the results of the interior noise and sonic fatigue technology development activities conducted during this period. For interior noise, these activities included excitation modeling, structural acoustic response modeling, development of passive treatments and active controls, and prediction of interior noise. For sonic fatigue, these activities included loads prediction, materials characterization, sonic fatigue code development, development of response reduction techniques, and generation of sonic fatigue design requirements. Also included are lessons learned and recommendations for future work.

In Search of a Visual-cortical Describing Function: a Summary of Work in Progress

NASA Technical Reports Server (NTRS)

Junker, A. M.; Peio, K. J.

1984-01-01

The thrust of the present work is to explore the utility of using a sum of sinusoids (seven or more) to obtain an evoked response and, furthermore, to see if the response is sensitive to changes in cognitive processing. Within the field of automatic control system technology, a mathematical input/output relationship for a sinusoidally stimulated nonlinear system is defined as describing function. Applying this technology, sum of sines inputs to yield describing functions for the visual-cortical response have been designed. What follows is a description of the method used to obtain visual-cortical describing functions. A number of measurement system redesigns were necessary to achieve the desired frequency resolution. Results that guided and came out of the redesigns are presented. Preliminary results of stimulus parameter effects (average intensity and depth of modulation) are also shown.

Principles and Concepts for Information and Communication Technology Design.

ERIC Educational Resources Information Center

Adams, Ray; Langdon, Patrick

2003-01-01

This article presents a theory for evaluating information and communication technology design for individuals with disabilities. Simplex 1 evaluates designs in five zones: sensory and input zone; output zone; abstract working memory; long-term memory; and central executive functioning. Simplex 2 evaluates feedback, emotional responses, cognitive…

Communication Technology and Postdivorce Coparenting

ERIC Educational Resources Information Center

Ganong, Lawrence H.; Coleman, Marilyn; Feistman, Richard; Jamison, Tyler; Markham, Melinda Stafford

2012-01-01

Divorced individuals who share parenting responsibilities have to figure out ways to work together to raise their children. The purpose of this qualitative study of 49 divorced coparents was to examine how they used technology (e.g., cell phones, computers) to communicate. For parents in effective coparenting relationships, communication…

2012 DOE Vehicle Technologies Program Annual Merit Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

Technology Enabled Work: The Role of Self-Efficacy in Determining Telecommuter Adjustment and Structuring Behavior.

ERIC Educational Resources Information Center

Raghuram, Sumita; Wiesenfeld, Batia; Garud, Raghu

2003-01-01

Responses from 31.5% of 723 telecommuters revealed a positive association between self-efficacy and both adjustment to teleworking and behaviors for structuring work. The more extensive the telecommuting, the stronger these positive relationships. Women were more proactive in structuring work behavior. (Contains 43 references.) (SK)

Nuclear thermal propulsion technology: Results of an interagency panel in FY 1991

NASA Technical Reports Server (NTRS)

Clark, John S.; Mcdaniel, Patrick; Howe, Steven; Helms, Ira; Stanley, Marland

1993-01-01

NASA LeRC was selected to lead nuclear propulsion technology development for NASA. Also participating in the project are NASA MSFC and JPL. The U.S. Department of Energy will develop nuclear technology and will conduct nuclear component, subsystem, and system testing at appropriate DOE test facilities. NASA program management is the responsibility of NASA/RP. The project includes both nuclear electric propulsion (NEP) and nuclear thermal propulsion (NTP) technology development. This report summarizes the efforts of an interagency panel that evaluated NTP technology in 1991. Other panels were also at work in 1991 on other aspects of nuclear propulsion, and the six panels worked closely together. The charters for the other panels and some of their results are also discussed. Important collaborative efforts with other panels are highlighted. The interagency (NASA/DOE/DOD) NTP Technology Panel worked in 1991 to evaluate nuclear thermal propulsion concepts on a consistent basis. Additionally, the panel worked to continue technology development project planning for a joint project in nuclear propulsion for the Space Exploration Initiative (SEI). Five meetings of the panel were held in 1991 to continue the planning for technology development of nuclear thermal propulsion systems. The state-of-the-art of the NTP technologies was reviewed in some detail. The major technologies identified were as follows: fuels, coatings, and other reactor technologies; materials; instrumentation, controls, health monitoring and management, and associated technologies; nozzles; and feed system technology, including turbopump assemblies.

76 FR 80417 - Request for Information: Public Access to Digital Data Resulting From Federally Funded Scientific...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... OFFICE OF SCIENCE AND TECHNOLOGY POLICY Request for Information: Public Access to Digital Data... public access to unclassified digital data that result from federally funded scientific research. The... Technology Council's Interagency Working Group on Digital Data. Release Date: November 3, 2011. Response Date...

Technology Transfer: Use of Federally Funded Research and Development

DTIC Science & Technology

2007-07-19

technology to the private sector and to state and local governments. Despite this, use of federal R&D results has remained restrained, although there has...been a significant increase in private sector interest and activities over the past several years. Critics argue that working with the agencies and...technology transfer, or if the responsibility to use the available resources now rests with the private sector .

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

NASA Technical Reports Server (NTRS)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

OSMA Research and Technology Strategy Team Summary

NASA Technical Reports Server (NTRS)

Wetherholt, Martha

2010-01-01

This slide presentation reviews the work of the Office of Safety and Mission Assurance (OSMA), and the OSMA Research and Technology Strategy (ORTS) team. There is discussion of the charter of the team, Technology Readiness Levels (TRLs) and how the teams responsibilities are related to these TRLs. In order to improve the safety of all levels of the development through the TRL phases, improved communication, understanding and cooperation is required at all levels, particularly at the mid level technologies development.

Designing a good life: a matrix for the technological mediation of morality.

PubMed

Swierstra, Tsjalling; Waelbers, Katinka

2012-03-01

Technologies fulfill a social role in the sense that they influence the moral actions of people, often in unintended and unforeseen ways. Scientists and engineers are already accepting much responsibility for the technological, economical and environmental aspects of their work. This article asks them to take an extra step, and now also consider the social role of their products. The aim is to enable engineers to take a prospective responsibility for the future social roles of their technologies by providing them with a matrix that helps to explore in advance how emerging technologies might plausibly affect the reasons behind people's (moral) actions. On the horizontal axis of the matrix, we distinguished the three basic types of reasons that play a role in practical judgment: what is the case, what can be done and what should be done. On the vertical axis we distinguished the morally relevant classes of issues: stakeholders, consequences and the good life. To illustrate how this matrix may work in practice, the final section applies the matrix to the case of the Google PowerMeter. © The Author(s) 2010. This article is published with open access at Springerlink.com

Wiki Technology: A Virtual, Cooperative Learning Tool Used to Enhance Student Learning

ERIC Educational Resources Information Center

Barrera, Alessandra L.

2015-01-01

This study demonstrates the use of wiki technology (an editable webpage environment) to provide a virtual, asynchronous collaborative-learning environment for students for the purpose of working on course-content-focused study-guide questions. To analyze the effectiveness of this course tool, students' responses to various qualitative and…

Introducing the First Hybrid Doctoral Program in Educational Technology

ERIC Educational Resources Information Center

Koehler, Matthew J.; Zellner, Andrea L.; Roseth, Cary J.; Dickson, Robin K.; Dickson, W. Patrick; Bell, John

2013-01-01

In 2010 Michigan State University launched the first hybrid doctoral program in Educational Technology. This 5-year program blends face-to-face and online components to engage experienced, working education professionals in doctoral study. In this paper, we describe the design and evolution of the program as well as the response from students. We…

IT Educational Experience and Workforce Development for Information Systems and Technology Students

ERIC Educational Resources Information Center

Legier, John T., Jr.; Soares, Andrey

2014-01-01

This study involves an analysis of a cohort of student's during their pursuit of a Bachelor of Science degree in Information Systems Technologies (IST) at a Midwestern university. Demographics and analysis of this cohort include basic demographic information, student home-life and personal responsibilities, employment and work experience, and…

Student Perceptions of Chemistry Experiments with Different Technological Interfaces: A Comparative Study

ERIC Educational Resources Information Center

Priest, Samuel J.; Pyke, Simon M.; Williamson, Natalie M.

2014-01-01

Microcomputer based laboratory activities have been suggested to have a number of benefits in science education. However, their implementation produces mixed results, and student perception data have in the past yielded responses that are negative regarding the technology. This work presents a case study of three first year undergraduate chemistry…

Temporal Investment Strategy to Enable JPL Future Space Missions

NASA Technical Reports Server (NTRS)

Lincoln, William P.; Hua, Hook; Weisbin, Charles R.

2006-01-01

The Jet Propulsion Laboratory (JPL) formulates and conducts deep space missions for NASA (the National Aeronautics and Space Administration). The Chief Technologist of JPL has the responsibility for strategic planning of the laboratory's advanced technology program to assure that the required technological capabilities to enable future JPL deep space missions are ready as needed; as such he is responsible for the development of a Strategic Plan. As part of the planning effort, he has supported the development of a structured approach to technology prioritization based upon the work of the START (Strategic Assessment of Risk and Technology) team. A major innovation reported here is the addition of a temporal model that supports scheduling of technology development as a function of time. The JPL Strategic Technology Plan divides the required capabilities into 13 strategic themes. The results reported here represent the analysis of an initial seven.

The Worker and Work: Contemporary Problems and Perspectives: Three Lectures.

ERIC Educational Resources Information Center

Clarke, Oliver

The series of three lectures examine different aspects of work as manifested in changes in workers' attitudes, responses to these changes in the European context, and significant European developments in relation to worker participation. The first lecture discusses social, technological, educational, and economic changes that have affected…

Media Specialists Can Learn Web 2.0 Tools to Make Schools More Cool

ERIC Educational Resources Information Center

Hauser, Judy

2007-01-01

Media specialists today are required to use more and more technology. Their responsibilities encompass everything from repairing overhead projectors to administrating an entire library's automated system. These responsibilities are in addition to working with students on research and information literacy, making book selections, and collaborating…

NPS TINYSCOPE Program Management

DTIC Science & Technology

2010-09-01

SMDC - Space and Missile Defense Command SOW - Statement of Work STEM - Science, Technology, Engineering and Mathematics STP - Space Test Program...the project. A statement of work ( SOW ) is typically used to document broad responsibilities, deliverables, and the work activities required in a...given project. The SOW acts as a guideline Summary of TINYSCOPE and Argus Requirements Requirement Threshold Objective Mission IOC Sep 2011 ASAP

Adoption and Use of Digital Technologies among General Dental Practitioners in the Netherlands

PubMed Central

van der Zande, Marieke M.; Gorter, Ronald C.; Aartman, Irene H. A.; Wismeijer, Daniel

2015-01-01

Objectives To investigate (1) the degree of digital technology adoption among general dental practitioners, and to assess (2) which personal and practice factors are associated with technology use. Methods A questionnaire was distributed among a stratified sample of 1000 general dental practitioners in the Netherlands, to measure the use of fifteen administrative, communicative, clinical and diagnostic technologies, as well as personal factors and dental practice characteristics. Results The response rate was 31.3%; 65.1% replied to the questionnaire on paper and 34.9% online. Each specific digital technology was used by between 93.2% and 6.8% of the dentists. Administrative technologies were generally used by more dentists than clinical technologies. Dentists had adopted an average number of 6.3±2.3 technologies. 22.5% were low technology users (0 to 4 technologies), 46.2% were intermediate technology users (5 to 7 technologies) and 31.3% were high technology users (8 to12 technologies). High technology users more frequently had a specialization (p<0.001), were younger on average (p=0.024), and worked more hours per week (p=0.003) than low technology users, and invested more hours per year in professional activities (p=0.026) than intermediate technology users. High technology use was also more common for dentists working in practices with a higher average number of patients per year (p<0.001), with more dentists working in the practice (p<0.001) and with more staff (p<0.001). Conclusion With few exceptions, all dentists use some or a substantial number of digital technologies. Technology use is associated with various patterns of person-specific factors, and is higher when working in larger dental practices. The findings provide insight into the current state of digital technology adoption in dental practices. Further exploration why some dentists are more reluctant to adopt technologies than others is valuable for the dental profession’s agility in adjusting to technological developments. PMID:25811594

Emotional engineers: toward morally responsible design.

PubMed

Roeser, Sabine

2012-03-01

Engineers are normally seen as the archetype of people who make decisions in a rational and quantitative way. However, technological design is not value neutral. The way a technology is designed determines its possibilities, which can, for better or for worse, have consequences for human wellbeing. This leads various scholars to the claim that engineers should explicitly take into account ethical considerations. They are at the cradle of new technological developments and can thereby influence the possible risks and benefits more directly than anybody else. I have argued elsewhere that emotions are an indispensable source of ethical insight into ethical aspects of risk. In this paper I will argue that this means that engineers should also include emotional reflection into their work. This requires a new understanding of the competencies of engineers: they should not be unemotional calculators; quite the opposite, they should work to cultivate their moral emotions and sensitivity, in order to be engaged in morally responsible engineering. © The Author(s) 2010. This article is published with open access at Springerlink.com

A Quantitative Study of the Resultant Differences between Additive Practices and Reductive Practices in Data Requirements Gathering

ERIC Educational Resources Information Center

Johnson, Gerald

2016-01-01

With the increase in technology in all facets of our lives and work, there is an ever increasing set of expectations that people have regarding information availability, response time, and dependability. While expectations are affected by gender, age, experience, industry, and other factors, people have expectations of technology, and from…

NASA Lewis Research Center Workshop on Forced Response in Turbomachinery

NASA Technical Reports Server (NTRS)

Stefko, George L. (Compiler); Murthy, Durbha V. (Compiler); Morel, Michael (Compiler); Hoyniak, Dan (Compiler); Gauntner, Jim W. (Compiler)

1994-01-01

A summary of the NASA Lewis Research Center (LeRC) Workshop on Forced Response in Turbomachinery in August, 1993 is presented. It was sponsored by the following NASA organizations: Structures, Space Propulsion Technology, and Propulsion Systems Divisions of NASA LeRC and the Aeronautics and Advanced Concepts & Technology Offices of NASA Headquarters. In addition, the workshop was held in conjunction with the GUIde (Government/Industry/Universities) Consortium on Forced Response. The workshop was specifically designed to receive suggestions and comments from industry on current research at NASA LeRC in the area of forced vibratory response of turbomachinery blades which includes both computational and experimental approaches. There were eight presentations and a code demonstration. Major areas of research included aeroelastic response, steady and unsteady fluid dynamics, mistuning, and corresponding experimental work.

Results of a national survey indicating information technology skills needed by nurses at time of entry into the work force.

PubMed

McCannon, Melinda; O'Neal, Pamela V

2003-08-01

A national survey was conducted to determine the information technology skills nurse administrators consider critical for new nurses entering the work force. The sample consisted of 2,000 randomly selected members of the American Organization of Nurse Executives. Seven hundred fifty-two usable questionnaires were returned, for a response rate of 38%. The questionnaire used a 5-point Likert scale and consisted of 17 items that assessed various technology skills and demographic information. The questionnaire was developed and pilot tested with content experts to establish content validity. Descriptive analysis of the data revealed that using e-mail effectively, operating basic Windows applications, and searching databases were critical information technology skills. The most critical information technology skill involved knowing nursing-specific software, such as bedside charting and computer-activated medication dispensers. To effectively prepare nursing students with technology skills needed at the time of entry into practice, nursing faculty need to incorporate information technology skills into undergraduate nursing curricula.

Final Report: Fire Prevention, Detection, and Suppression Project, Exploration Technology Development Program

NASA Technical Reports Server (NTRS)

Ruff, Gary A.

2011-01-01

The Fire Prevention, Detection, and Suppression (FPDS) project is a technology development effort within the Exploration Technology Development Program of the Exploration System Missions Directorate (ESMD) that addresses all aspects of fire safety aboard manned exploration systems. The overarching goal for work in the FPDS area is to develop technologies that will ensure crew health and safety on exploration missions by reducing the likelihood of a fire, or, if one does occur, minimizing the risk to the crew, mission, or system. This is accomplished by addressing the areas of (1) fire prevention and material flammability, (2) fire signatures and detection, and (3) fire suppression and response. This report describes the outcomes of this project from the formation of the Exploration Technology Development Program (ETDP) in October 2005 to September 31, 2010 when the Exploration Technology Development Program was replaced by the Enabling Technology Development and Demonstration Program. NASA s fire safety work will continue under this new program and will build upon the accomplishments described herein.

QuEST: Qualifying Environmentally Sustainable Technologies. Vol. 3

NASA Technical Reports Server (NTRS)

Lewis, Pattie (Editor)

2008-01-01

This is an exciting new chapter for the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). The Principal Center's past successes have created new opportunities for partnership and technology implementation. TEERM is continuing to support the current NASA Programs while reaching out and offering our assistance and experience to Constellation. NASA has also assumed Chairmanship responsibility of the Joint Group on Pollution Prevention (JG-PP) and Chairmanship of the JG-PP Working Group (WG). Both JG-PP and TEERM strive to improve mission readiness and reduce risk to personnel and assets by solving joint problems through cooperation. JG-PP and TEERM not only show our commitment to environmental stewardship, but also our commitment to fiscal responsibility.

What do K-12 students feel when dealing with technology and engineering issues? Gardner's multiple intelligence theory implications in technology lessons for motivating engineering vocations at Spanish Secondary School

NASA Astrophysics Data System (ADS)

Sánchez-Martín, Jesús; Álvarez-Gragera, García J.; Dávila-Acedo, M. Antonia; Mellado, Vicente

2017-11-01

The interest on engineering and scientific studies can be raised up even from the early years of academic instructional process. This vocation may be linked to emotions and aptitudes towards technological education. Particularly, students get in touch with these technological issues (namely STEM) during the Compulsory Secondary Education in Spain (12-16 years old).This work presents a preliminary evaluation of how relevant is Gardner's multiple intelligence theory (MIT) in the teaching-learning process within the Technology Lessons. In this sense, MIT was considered as an explanation variable of the emotional response within the different educational parts (so-called syllabus units, SU) in the Technology spanish curriculum. Different intelligence style (IS) will orient the student to a vision of the engineering and technology. This work tries to identify which relationships can be established between IS and specific technology and engineering learning. This research involved up to 135 students were subsequently tested about their predominant (IS) and on the emotions that arouse in them when working with each SU. The results were statistically significant and only those with a Logic-arithmetic or Environmental IS were not affected by the SU.Best teaching and learning practicesare required for encouraging further engineering studies.

Development of Technology Transfer Economic Growth Metrics

NASA Technical Reports Server (NTRS)

Mastrangelo, Christina M.

1998-01-01

The primary objective of this project is to determine the feasibility of producing technology transfer metrics that answer the question: Do NASA/MSFC technical assistance activities impact economic growth? The data for this project resides in a 7800-record database maintained by Tec-Masters, Incorporated. The technology assistance data results from survey responses from companies and individuals who have interacted with NASA via a Technology Transfer Agreement, or TTA. The goal of this project was to determine if the existing data could provide indications of increased wealth. This work demonstrates that there is evidence that companies that used NASA technology transfer have a higher job growth rate than the rest of the economy. It also shows that the jobs being supported are jobs in higher wage SIC codes, and this indicates improvements in personal wealth. Finally, this work suggests that with correct data, the wealth issue may be addressed.

Oil Spill Response Technology Initiation Decision Report to the Pollution Abatement Ashore Program

DTIC Science & Technology

2007-12-01

Canada, Mexico ITAC – International Boats/Helos – VHF Trailers /Tracks – Internet, phones, 800 mHz Handhelds, VHF Patching – connect to other...EPA Trailer w/ com antenna Lisa, START (Superfund Tech Assessment + Response Team) Contractor, Emerg Response Team Bob, Fields unit, using...NMCI access – can’t work for response + satellite comms tested VOIP & internet + participation by City of Chicago – Trailer brought to get comms to

Ethics and Engineering. Working Papers Series Volume 2.

ERIC Educational Resources Information Center

Cutcliffe, Stephen H., Ed.

This collection of essays is the second volume in a series of working papers from Lehigh University Technology Studies Resource Center. The papers focus on the ethical implications of engineering as a profession and the current problems associated with the public responsibility of engineers. Issues that relate to the ethical dimensions of…

Economic and Work Force Development. New Directions for Community Colleges, Number 75.

ERIC Educational Resources Information Center

Waddell, Geneva, Ed.

1991-01-01

Among the factors reshaping the American workforce are diversity, demands of work and family, global competition, the growing importance of strategic human resource planning, the need to reeducate employees for new technologies and more demanding jobs, and renewed interest in ethics and social responsibility. This collection of articles examines…

The Impact of ICT on Work-Life Experiences among University Teaching Assistants

ERIC Educational Resources Information Center

Osterlund, Katherine; Robson, Karen

2009-01-01

Email is now commonplace in the university environment, but little research has addressed the impact of this technology on the work-life experiences of Teaching Assistants (TAs). These workers are of interest as they are typically responsible for most day-to-day, routine interaction with undergraduates, for ensuring students understand lectures…

Clicking toward Better Grades: The Use of Student Response Systems in Social Work Education

ERIC Educational Resources Information Center

Voith, Laura A.; Holmes, Megan R.; Duda-Banwar, Janelle

2018-01-01

Faculty members at universities are increasingly shifting their pedagogical focus from traditional lectures to active learning by integrating academic technology such as clickers (i.e., student response systems) into classrooms. However, few studies have examined the effect of clickers on learning outcomes such as test grades, and even fewer…

Clinicians, security and information technology support services in practice settings--a pilot study.

PubMed

Fernando, Juanita

2010-01-01

This case study of 9 information technology (IT) support staff in 3 Australian (Victoria) public hospitals juxtaposes their experiences at the user-level of eHealth security in the Natural Hospital Environment with that previously reported by 26 medical, nursing and allied healthcare clinicians. IT support responsibilities comprised the entire hospital, of which clinician eHealth security needs were only part. IT staff believed their support tasks were often fragmented while work responsibilities were hampered by resources shortages. They perceived clinicians as an ongoing security risk to private health information. By comparison clinicians believed IT staff would not adequately support the private and secure application of eHealth for patient care. Preliminary data analysis suggests the tension between these cohorts manifests as an eHealth environment where silos of clinical work are disconnected from silos of IT support work. The discipline-based silos hamper health privacy outcomes. Privacy and security policies, especially those influencing the audit process, will benefit by further research of this phenomenon.

Visions for a sustainable world: A conference on science, technology and social responsibility. Conference report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report summarizes the organization, activities, and outcomes of Student Pugwash USA`s 1992 International Conference, Visions for a Sustainable World: A Conference on Science, Technology and Social Responsibility. The conference was held June 14--20, 1992 at Emory University, and brought together 94 students and over 65 experts from industry, academe, and government. The conference addressed issues ranging from global environmental cooperation to the social impacts of the Human Genome Project to minority concerns in the sciences. It provided a valuable forum for talented students and professionals to engage in critical dialogue on many interdisciplinary issues at the juncture of science,more » technology and society. The conference challenged students -- the world`s future scientists, engineers, and political leaders -- to think broadly about global problems and to devise policy options that are viable and innovative. The success of the conference in stimulating interest, understanding, and enthusiasm about interdisciplinary global issues is clearly evident from both the participants` feedback and their continued involvement in Student Pugwash USA programs. Six working groups met each morning. The working group themes included: environmental challenges for developing countries; energy options: their social and environmental impact; health care in developing countries; changing dynamics of peace and global security; educating for the socially responsible use of technology; ethics and the use of genetic information. The conference was specifically designed to include mechanisms for ensuring its long-term impact. Participants were encouraged to focus on their individual role in helping resolve global issues. This was achieved through each participant`s development of a Personal Plan of Action, a plan which mapped out activities the student could undertake after the conference to continue the dialogue and work towards the resolution of global and local problems.« less

Imagine All that Stuff Really Happening: Narrative and Identity in Children's On-Screen Writing

ERIC Educational Resources Information Center

Merchant, Guy

2004-01-01

In the world of work and in the social lives of many, new technology plays an important role in establishing and maintaining relationships and exchanging information. The school system varies in its response to this new technology and particularly to the popular communication of email and mobile phone users. In schools and classrooms, policies,…

The "P2P" Educational Model Providing Innovative Learning by Linking Technology, Business and Research

ERIC Educational Resources Information Center

Dickinson, Paul Gordon

2017-01-01

This paper evaluates the effect and potential of a new educational learning model called Peer to Peer (P2P). The study was focused on Laurea, Hyvinkaa's Finland campus and its response to bridging the gap between traditional educational methods and working reality, where modern technology plays an important role. The study describes and evaluates…

Space Technology for the New Century

NASA Technical Reports Server (NTRS)

1998-01-01

The National Aeronautics and Space Administration (NASA) is responsible for developing advanced space technologies that will lower the cost and improve the performance of existing space activities and enable new ones. Although NASA has recently proved adept at incorporating modern technologies into its spacecraft, the agency currently supports relatively little work in long-term space technology development. To enable ambitious future space activities and to achieve its long-term goals, NASA needs to engage in space research and technology development (R&T) in critical areas for the long term. NASA requested that the National Research Council (NRC) examine the nation's space technology needs in the post-2000 time frame and identify high-risk, high-payoff technology that could improve the capabilities and reduce the costs fo NASA, other government, and commercial space programs. The NRC was also asked to suggest how NASA can work more effectively with industry and universities to develop these technologies. To accomplish these ends, the Committee on Advanced Space Technology, under the auspices of the Aeronautics and Space Engineering Board, undertook a systematic process of information gathering and technology assessment. Six key technologies that the committee believes NASA should support are presented.

A New System of Education.

ERIC Educational Resources Information Center

Schure, Alexander

1980-01-01

Examines expected changes in education in the next decade due to advanced technology, change in labor force participants, economic conditions, youth unemployment, new work styles, and the responsiveness of educational institutions to these changes. (CT)

A comprehensive guide of remediation technologies for oil contaminated soil - Present works and future directions.

PubMed

Lim, Mee Wei; Lau, Ee Von; Poh, Phaik Eong

2016-08-15

Oil spills result in negative impacts on the environment, economy and society. Due to tidal and waves actions, the oil spillage affects the shorelines by adhering to the soil, making it difficult for immediate cleaning of the soil. As shoreline clean-up is the most costly component of a response operation, there is a need for effective oil remediation technologies. This paper provides a review on the remediation technologies for soil contaminated with various types of oil, including diesel, crude oil, petroleum, lubricating oil, bitumen and bunker oil. The methods discussed include solvent extraction, bioremediation, phytoremediation, chemical oxidation, electrokinetic remediation, thermal technologies, ultrasonication, flotation and integrated remediation technologies. Each of these technologies was discussed, and associated with their advantages, disadvantages, advancements and future work in detail. Nonetheless, it is important to note that no single remediation technology is considered the best solution for the remediation of oil contaminated soil. This review provides a comprehensive literature on the various remediation technologies studied in the removal of different oil types from soil. Copyright © 2016 Elsevier Ltd. All rights reserved.

Field studies of safety security rescue technologies through training and response activities

NASA Astrophysics Data System (ADS)

Murphy, Robin R.; Stover, Sam

2006-05-01

This paper describes the field-oriented philosophy of the Institute for Safety Security Rescue Technology (iSSRT) and summarizes the activities and lessons learned during calendar year 2005 of its two centers: the Center for Robot-Assisted Search and Rescue and the NSF Safety Security Rescue industry/university cooperative research center. In 2005, iSSRT participated in four responses (La Conchita, CA, Mudslides, Hurricane Dennis, Hurricane Katrina, Hurricane Wilma) and conducted three field experiments (NJTF-1, Camp Hurricane, Richmond, MO). The lessons learned covered mobility, operator control units, wireless communications, and general reliability. The work has collectively identified six emerging issues for future work. Based on these studies, a 10-hour, 1 continuing education unit credit course on rescue robotics has been created and is available. Rescue robots and sensors are available for loan upon request.

Final report. Technology innovation for global change: The role of assessment, R and D, and regulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, William C.; Holdren, John P.; Norberg-Bohm, Vicki

2001-11-29

Through the research carried out under this grant, we have made considerable progress in addressing our fundamental research question: How and under what conditions can government stimulate radical technological innovation? More specifically, we have analyzed three pathways through which government may influence the decisions by firms to invest in radical technological innovation: technological opportunism (supply-push policies), regulatory responsiveness (demand-pull policies) and anticipatory action (assessments and information policy). We have produced several written documents, as well as made several presentations of our work. We are now working on a book based on this research, which we will have to a publishermore » in 2002. We are also pursuing other opportunities for dissemination of the results, including both presentations and articles in the academic and policy press.« less

Armstrong Flight Research Center Research Technology and Engineering Report 2015

NASA Technical Reports Server (NTRS)

Voracek, David F.

2016-01-01

I am honored to endorse the 2015 Neil A. Armstrong Flight Research Center’s Research, Technology, and Engineering Report. The talented researchers, engineers, and scientists at Armstrong are continuing a long, rich legacy of creating innovative approaches to solving some of the difficult problems and challenges facing NASA and the aerospace community.Projects at NASA Armstrong advance technologies that will improve aerodynamic efficiency, increase fuel economy, reduce emissions and aircraft noise, and enable the integration of unmanned aircraft into the national airspace. The work represented in this report highlights the Center’s agility to develop technologies supporting each of NASA’s core missions and, more importantly, technologies that are preparing us for the future of aviation and space exploration.We are excited about our role in NASA’s mission to develop transformative aviation capabilities and open new markets for industry. One of our key strengths is the ability to rapidly move emerging techniques and technologies into flight evaluation so that we can quickly identify their strengths, shortcomings, and potential applications.This report presents a brief summary of the technology work of the Center. It also contains contact information for the associated technologists responsible for the work. Don’t hesitate to contact them for more information or for collaboration ideas.

Technology Tools for the Tough Tasks: Plug in for Great Outcomes

ERIC Educational Resources Information Center

Simon, Fran

2012-01-01

There are a lot of easy-to-use online tools that can help teachers and administrators with the tough tasks involved in running efficient, responsive, and intentional programs. The efficiencies offered through these systems allow busy educators to spend less time managing information and more time doing the work that matters the most--working with…

The Design and Validation of an Instrument to Measure Teachers' Professional Development at Work

ERIC Educational Resources Information Center

Evers, Arnoud T.; Kreijns, Karel; Van der Heijden, Béatrice I. J. M.

2016-01-01

After graduation, it is essential for teachers to continue working on their professional development since they need to be prepared for the requirements of tomorrow's knowledge- and technology-based society, a more varied student and pupil population creating new responsibilities, and higher social expectations from schools and the society as a…

Responses to Different Types of Inquiry Prompts: College Students' Discourse, Performance, and Perceptions of Group Work in an Engineering Class

ERIC Educational Resources Information Center

Balgopal, Meena M.; Casper, Anne Marie A.; Atadero, Rebecca A.; Rambo-Hernandez, Karen E.

2017-01-01

Working in small groups to solve problems is an instructional strategy that allows university students in science, technology, engineering, and mathematics disciplines the opportunity to practice interpersonal and professional skills while gaining and applying discipline-specific content knowledge. Previous research indicates that not all group…

Microcantilever sensor platform for UGV-based detection

NASA Astrophysics Data System (ADS)

Lawrence, Tyson T.; Halleck, A. E.; Schuler, Peter S.; Mahmud, K. K.; Hicks, David R.

2010-04-01

The increased use of Unmanned Ground Vehicles (UGVs) drives the need for new lightweight, low cost sensors. Microelectromechanical System (MEMS) based microcantilever sensors are a promising technology to meet this need, because they can be manufactured at low cost on a mass scale, and are easily integrated into a UGV platform for detection of explosives and other threat agents. While the technology is extremely sensitive, selectivity is a major challenge and the response modes are not well understood. This work summarizes advances in characterizing ultrasensitive microcantilever responses, sampling considerations, and sensor design and cantilever coating methodologies consistent with UGV point detector needs.

E-DECIDER Disaster Response and Decision Support Cyberinfrastructure: Technology and Challenges

NASA Astrophysics Data System (ADS)

Glasscoe, M. T.; Parker, J. W.; Pierce, M. E.; Wang, J.; Eguchi, R. T.; Huyck, C. K.; Hu, Z.; Chen, Z.; Yoder, M. R.; Rundle, J. B.; Rosinski, A.

2014-12-01

Timely delivery of critical information to decision makers during a disaster is essential to response and damage assessment. Key issues to an efficient emergency response after a natural disaster include rapidly processing and delivering this critical information to emergency responders and reducing human intervention as much as possible. Essential elements of information necessary to achieve situational awareness are often generated by a wide array of organizations and disciplines, using any number of geospatial and non-geospatial technologies. A key challenge is the current state of practice does not easily support information sharing and technology interoperability. NASA E-DECIDER (Emergency Data Enhanced Cyber-Infrastructure for Disaster Evaluation and Response) has worked with the California Earthquake Clearinghouse and its partners to address these issues and challenges by adopting the XChangeCore Web Service Data Orchestration technology and participating in several earthquake response exercises. The E-DECIDER decision support system provides rapid delivery of advanced situational awareness data products to operations centers and emergency responders in the field. Remote sensing and hazard data, model-based map products, information from simulations, damage detection, and crowdsourcing is integrated into a single geospatial view and delivered through a service oriented architecture for improved decision-making and then directly to mobile devices of responders. By adopting a Service Oriented Architecture based on Open Geospatial Consortium standards, the system provides an extensible, comprehensive framework for geospatial data processing and distribution on Cloud platforms and other distributed environments. While the Clearinghouse and its partners are not first responders, they do support the emergency response community by providing information about the damaging effects earthquakes. It is critical for decision makers to maintain a situational awareness that is knowledgeable of potential and current conditions, possible impacts on populations and infrastructure, and other key information. E-DECIDER and the Clearinghouse have worked together to address many of these issues and challenges to deliver interoperable, authoritative decision support products.

Testing of Ruggedized Antibodies within a Lateral Flow Immunoassay

DTIC Science & Technology

2017-10-01

Roy Thompson RESEARCH AND TECHNOLOGY DIRECTORATE Kelley Betts LEIDOS Gunpowder, MD 21010-0068 Randy Hofmann EXCET, INC. Springfield, VA 22150-2519 Hsiu...average 1 h per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and...on the work performed at ECBC in collaboration with the Defense Advanced Research Projects Agency, Antibody Technology Program and the Defense Threat

Technologies for the marketplace from the Centers for Disease Control

NASA Technical Reports Server (NTRS)

Reid-Sanden, Frances L.; Greene, R. Eric; Malvitz, Dolores M.

1991-01-01

The Centers for Disease Control, a Public Health Service agency, is responsible for the prevention and control of disease and injury. Programs range from surveillance and prevention of chronic and infectious diseases to occupational health and injury control. These programs have produced technologies in a variety of fields, including vaccine development, new methods of disease diagnosis, and new tools to ensure a safer work environment.

Magnetic Field-Induced Phase Transformation in Magnetic Shape Memory Alloys with High Actuation Stress and Work Output

DTIC Science & Technology

2010-05-03

Mechanisms for Advanced Properties in Phase Transforming Materials , Materials Science & Technology 2009 Conference, October 25-29, 2009, Pittsburgh, PA...Advanced Properties in Phase Transforming Materials , Materials Science & Technology 2009 Conference, October 25-29, 2009, Pittsburgh, PA, 2009. 11...observed materials behavior. Indeed, measured materials properties were found not to be the exact indication of the materials real response

Research and Technology 1996: Innovation in Time and Space

NASA Technical Reports Server (NTRS)

1996-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1996 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities.

Research and technology annual report, FY 1990

NASA Technical Reports Server (NTRS)

1990-01-01

Given here is the annual report of the John C. Stennis Space Center (SSC), a NASA center responsible for testing NASA's large propulsion systems, developing supporting test technologies, conducting research in a variety of earth science disciplines, and facilitating the commercial uses of NASA-developed technologies. Described here are activities of the Earth Sciences Research Program, the Technology Development Program, commercial programs, the Technology Utilization Program, and the Information Systems Program. Work is described in such areas as forest ecosystems, land-sea interface, wetland biochemical flux, thermal imaging of crops, gas detectors, plume analysis, synthetic aperture radar, forest resource management, applications engineering, and the Earth Observations Commercial Applications Program.

Research and Technology: 2003 Annual Report of the John F Kennedy Space Center

NASA Technical Reports Server (NTRS)

2003-01-01

The John F. Kennedy Space Center (KSC) is America's Spaceport Technology Center. The KSC technology development program encompasses the efforts of the entire KSC team, consisting of Government and contractor personnel, working in partnership with academic institutions and commercial industry. KSC's assigned mission areas are space launch operations and spaceport and range technologies. KSC's technology development customers include current space transportation programs, future space transportation programs / initiatives, and enabling technical programs. The KSC Research and Technology 2003 Annual Report encompasses the efforts of contributors to the KSC advanced technology development program and KSC technology transfer activities. Dr. Dave Bartine, KSC Chief Technologist, (321) 867-7069, is responsible for publication of this report and should be contacted for any desired information regarding KSC's research and technology development activities.

Hybrid imaging: a quantum leap in scientific imaging

NASA Astrophysics Data System (ADS)

Atlas, Gene; Wadsworth, Mark V.

2004-01-01

ImagerLabs has advanced its patented next generation imaging technology called the Hybrid Imaging Technology (HIT) that offers scientific quality performance. The key to the HIT is the merging of the CCD and CMOS technologies through hybridization rather than process integration. HIT offers exceptional QE, fill factor, broad spectral response and very low noise properties of the CCD. In addition, it provides the very high-speed readout, low power, high linearity and high integration capability of CMOS sensors. In this work, we present the benefits, and update the latest advances in the performance of this exciting technology.

Leo Szilard Lecturship Award: How can physicists help the public make better decisions about science and technology?

NASA Astrophysics Data System (ADS)

Primack, Joel

2016-03-01

For more than 40 years the APS has worked to improve governmental decision-making, mainly through the Congressional Science and Technology Fellowship program and through occasional studies of important science and technology issues. How productive have these been? How can the APS and other professional societies more effectively combat anti-science propaganda and help the public develop better-informed views about science and technology? How can individual scientists communicate scientific concepts in a more understandable and engaging way? How can we encourage young scientists and students to participate in creating a scientifically responsible future?

Gender, technology change and globalization: the case of China.

PubMed

Guo, H; Zhao, M

1999-01-01

This paper reviews the experience of women workers in China while the country's economy is changing into a globalized, technologically advanced one. New computer-based technology is increasingly acknowledged as a powerful and pervasive force that can shape or, at least in many ways, affect employment. It is hailed for opening up fresh employment opportunities and reducing the physical stress involved in work. However, the possibilities of redundancies or intensification of workload also exist. By focusing on changes in women's work, the article reveals the contradictions inherent in following a development path based on ever-higher levels of technology in the context of an intensive mode of production, to which productivity is the core value. The economy is bolstered and some workers gain employment in expanding industries. However, workers, who lack access to training and who are reliant on the dwindling state support for their reproductive responsibilities, are marginalized and seek employment in the growing informal economy.

Working with bacteria and putting bacteria to work: The biopolitics of synthetic biology for energy in the United Kingdom.

PubMed

McLeod, Carmen; Nerlich, Brigitte; Mohr, Alison

2017-08-01

The UK government has made significant investment into so called 'fourth-generation' biofuel technologies. These biofuels are based on engineering the metabolic pathways of bacteria in order to create products compatible with existing infrastructure. Bacteria play an important role in what is promoted as a potentially new biological industrial revolution, which could address some of the negative environmental legacies of the last. This article presents results from ethnographic research with synthetic biologists who are challenged with balancing the curiosity-driven and intrinsically fulfilling scientific task of working with bacteria, alongside the policy-driven task of putting bacteria to work for extrinsic economic gains. In addition, the scientists also have to balance these demands with a new research governance framework, Responsible Research and Innovation, which envisions technoscientific innovation will be responsive to societal concerns and work in collaboration with stakeholders and members of the public. Major themes emerging from the ethnographic research revolve around stewardship, care, responsibility and agency. An overall conflict surfaces between individual agents assuming responsibility for 'stewarding' bacteria, against funding systems and structures imposing responsibility for economic growth. We discuss these findings against the theoretical backdrop of a new concept of 'energopolitics' and an anthropology of ethics and responsibility.

The Maker Movement, the Promise of Higher Education, and the Future of Work

ERIC Educational Resources Information Center

Wigner, Aubrey

2017-01-01

The 21st century will be the site of numerous changes in education systems in response to a rapidly evolving technological environment where existing skill sets and career structures may cease to exist or, at the very least, change dramatically. Likewise, the nature of work will also change to become more automated and more technologically…

People, processes, and systems: An observational study of the role of technology in rural youth mental health services.

PubMed

Orlowski, Simone; Lawn, Sharon; Matthews, Ben; Venning, Anthony; Jones, Gabrielle; Winsall, Megan; Antezana, Gaston; Bidargaddi, Niranjan; Musiat, Peter

2017-06-01

The merits of technology-based mental health service reform have been widely debated among academics, practitioners, and policy makers. The design of new technologies must first be predicated on a detailed appreciation of how the mental health system works before it can be improved or changed through the introduction of new products and services. Further work is required to better understand the nature of face-to-face mental health work and to translate this knowledge to computer scientists and system designers responsible for creating technology-based solutions. Intensive observation of day-to-day work within two rural youth mental health services in South Australia, Australia, was undertaken to understand how technology could be designed and implemented to enhance young people's engagement with services and improve their experience of help seeking. Data were analysed through a lens of complexity theory. Results highlight the variety of professional roles and services that can comprise the mental health system. The level of interconnectedness evident in the system contrasted with high levels of service self-organization and disjointed information flow. A mental health professional's work was guided by two main constructs: risk and engagement. Most clients presented with a profile of disability, disadvantage, and isolation, so complex client presentations and decision-making were core practices. Clients (and frequently, their families) engaged with services in a crisis-dependent manner, characterized by multiple disengagements and re-engagements over time. While significant opportunities exist to integrate technology into existing youth mental health services, technologies for this space must be usable for a broad range of medical, psychological and cognitive disability, social disadvantage, and accommodate repeat cycles of engagement/disengagement over time. © 2016 Australian College of Mental Health Nurses Inc.

PrediCTC, liquid biopsy in precision oncology: a technology transfer experience in the Spanish health system.

PubMed

Alonso-Alconada, L; Barbazan, J; Candamio, S; Falco, J L; Anton, C; Martin-Saborido, C; Fuster, G; Sampedro, M; Grande, C; Lado, R; Sampietro-Colom, L; Crego, E; Figueiras, S; Leon-Mateos, L; Lopez-Lopez, R; Abal, M

2018-05-01

Management of metastatic disease in oncology includes monitoring of therapy response principally by imaging techniques like CT scan. In addition to some limitations, the irruption of liquid biopsy and its application in personalized medicine has encouraged the development of more efficient technologies for prognosis and follow-up of patients in advanced disease. PrediCTC constitutes a panel of genes for the assessment of circulating tumor cells (CTC) in metastatic colorectal cancer patients, with demonstrated improved efficiency compared to CT scan for the evaluation of early therapy response in a multicenter prospective study. In this work, we designed and developed a technology transfer strategy to define the market opportunity for an eventual implementation of PrediCTC in the clinical practice. This included the definition of the regulatory framework, the analysis of the regulatory roadmap needed for CE mark, a benchmarking study, the design of a product development strategy, a revision of intellectual property, a cost-effectiveness study and an expert panel consultation. The definition and analysis of an appropriate technology transfer strategy and the correct balance among regulatory, financial and technical determinants are critical for the transformation of a promising technology into a viable technology, and for the decision of implementing liquid biopsy in the monitoring of therapy response in advanced disease.

Information and Communication Technologies in Social Work

PubMed Central

Perron, Brian E.; Taylor, Harry O.; Glass, Joseph E.; Margerum-Leys, Jon

2011-01-01

Information and communication technologies (ICTs) are electronic tools used to convey, manipulate and store information. The exponential growth of Internet access and ICTs greatly influenced social, political, and economic processes in the United States, and worldwide. Regardless of the level of practice, ICTs will continue influencing the careers of social workers and the clients they serve. ICTs have received some attention in the social work literature and curriculum, but we argue that this level of attention is not adequate given their ubiquity, growth and influence, specifically as it relates to upholding social work ethics. Significant attention is needed to help ensure social workers are responsive to the technological changes in the health care system, including the health care infrastructure and use of technology among clients. Social workers also need ICT competencies in order to effectively lead different types of social change initiatives or collaborate with professionals of other disciplines who are using ICTs as part of existing strategies. This paper also identifies potential pitfalls and challenges with respect to the adoption of ICTs, with recommendations for advancing their use in practice, education, and research. PMID:21691444

Harnessing Technology to Improve Formative Assessment of Student Conceptions in STEM: Forging a National Network

PubMed Central

Haudek, Kevin C.; Kaplan, Jennifer J.; Knight, Jennifer; Long, Tammy; Merrill, John; Munn, Alan; Nehm, Ross; Smith, Michelle; Urban-Lurain, Mark

2011-01-01

Concept inventories, consisting of multiple-choice questions designed around common student misconceptions, are designed to reveal student thinking. However, students often have complex, heterogeneous ideas about scientific concepts. Constructed-response assessments, in which students must create their own answer, may better reveal students’ thinking, but are time- and resource-intensive to evaluate. This report describes the initial meeting of a National Science Foundation–funded cross-institutional collaboration of interdisciplinary science, technology, engineering, and mathematics (STEM) education researchers interested in exploring the use of automated text analysis to evaluate constructed-response assessments. Participants at the meeting shared existing work on lexical analysis and concept inventories, participated in technology demonstrations and workshops, and discussed research goals. We are seeking interested collaborators to join our research community. PMID:21633063

Harnessing technology to improve formative assessment of student conceptions in STEM: forging a national network.

PubMed

Haudek, Kevin C; Kaplan, Jennifer J; Knight, Jennifer; Long, Tammy; Merrill, John; Munn, Alan; Nehm, Ross; Smith, Michelle; Urban-Lurain, Mark

2011-01-01

Concept inventories, consisting of multiple-choice questions designed around common student misconceptions, are designed to reveal student thinking. However, students often have complex, heterogeneous ideas about scientific concepts. Constructed-response assessments, in which students must create their own answer, may better reveal students' thinking, but are time- and resource-intensive to evaluate. This report describes the initial meeting of a National Science Foundation-funded cross-institutional collaboration of interdisciplinary science, technology, engineering, and mathematics (STEM) education researchers interested in exploring the use of automated text analysis to evaluate constructed-response assessments. Participants at the meeting shared existing work on lexical analysis and concept inventories, participated in technology demonstrations and workshops, and discussed research goals. We are seeking interested collaborators to join our research community.

Teaching undergraduate nursing students critical thinking: An innovative informatics strategy.

PubMed

Warren, Judith J; Connors, Helen R; Weaver, Charlotte; Simpson, Roy

2006-01-01

Simulated e-Health Delivery System (SEEDS) uses a clinical information system (CIS) to teach students how to process data from virtual patient case studies and work with information technology. SEEDS was developed in response to the Institute of Medicine recommendation that students be taught about information systems in order to improve quality patient care and reduce errors. Curriculum implications, implementation of the system, and technology challenges are discussed.

US Naval Facilities Engineering Service Center Environmental Program on Climate Change

DTIC Science & Technology

2008-09-01

of environmental issues related to climate change . There is a growing recognition that the Navy will need to perform its national security mission in... climate change -related technology work at the Naval Facilities Engineering Service Center (NAVFAC ESC) in Port Hueneme, California. NAVFAC ESC...categorized technologies that can be applied to climate change as mitigation, adaptation, and intervention. An essential element of the Navy’s response to

Paediatricians' opinions of microneedle-mediated monitoring: a key stage in the translation of microneedle technology from laboratory into clinical practice.

PubMed

Mooney, Karen; McElnay, James C; Donnelly, Ryan F

2015-08-01

Microneedle (MN) arrays could offer an alternative method to traditional drug delivery and blood sampling methods. However, acceptance among key end-users is critical for new technologies to succeed. MNs have been advocated for use in children and so, paediatricians are key potential end-users. However, the opinions of paediatricians on MN use have been previously unexplored. The aim of this study was to investigate the views of UK paediatricians on the use of MN technology within neonatal and paediatric care. An online survey was developed and distributed among UK paediatricians to gain their opinions of MN technology and its use in the neonatal and paediatric care settings, particularly for MN-mediated monitoring. A total of 145 responses were obtained, with a completion response rate of 13.7 %. Respondents believed an alternative monitoring technique to blood sampling in children was required. Furthermore, 83 % of paediatricians believed there was a particular need in premature neonates. Overall, this potential end-user group approved of the MN technology and a MN-mediated monitoring approach. Minimal pain and the perceived ease of use were important elements in gaining favour. Concerns included the need for confirmation of correct application and the potential for skin irritation. The findings of this study provide an initial indication of MN acceptability among a key potential end-user group. Furthermore, the concerns identified present a challenge to those working within the MN field to provide solutions to further improve this technology. The work strengthens the rationale behind MN technology and facilitates the translation of MN technology from lab bench into the clinical setting.

EFFECT OF GROUND-WATER REMEDIATION ACTIVITIES ON INDIGENOUS MICROFLORA

EPA Science Inventory

The United States Environmental Protection Agency (EPA), working with the Interagency DNAPL Consortium, completed an independent evaluation of microbial responses to ground-water remediation technology demonstrations at Launch Pad 34 at Cape Canaveral Air Station in Brevard Count...

Cross-sectional associations between daily rest periods during weekdays and psychological distress, non-restorative sleep, fatigue, and work performance among information technology workers.

PubMed

Tsuchiya, Masao; Takahashi, Masaya; Miki, Keiichi; Kubo, Tomohide; Izawa, Shuhei

2017-04-07

A daily rest period (DRP; rest taken from daily work during a 24 h period), is essential to work recovery. This study examined DRPs' distribution and association with health outcomes among information technology workers recruited from an internet panel (N=1,811). Participants completed a web questionnaire examining psychological distress as a primary outcome, along with non-restorative sleep, fatigue (stress reaction), and work performance. Logistic regression analysis showed elevated psychological distress when DRP was <12 h (OR: 2.54; 95% CI: 1.47-4.42) and <11 h (OR: 2.48, 95% CI: 1.17-5.26), although the 95% CI included 1 after adjusting for age, sex, and working and commuting hours. After the above adjustment, similar associations were found with non-restorative sleep and fatigue, but not work performance, when DRP was <12 h. These findings constitute the first analysis of a dose-response relationship between DRP and subjective health outcomes among white-collar workers.

Molecular dynamics simulation of potentiometric sensor response: the effect of biomolecules, surface morphology and surface charge.

PubMed

Lowe, B M; Skylaris, C-K; Green, N G; Shibuta, Y; Sakata, T

2018-05-10

The silica-water interface is critical to many modern technologies in chemical engineering and biosensing. One technology used commonly in biosensors, the potentiometric sensor, operates by measuring the changes in electric potential due to changes in the interfacial electric field. Predictive modelling of this response caused by surface binding of biomolecules remains highly challenging. In this work, through the most extensive molecular dynamics simulation of the silica-water interfacial potential and electric field to date, we report a novel prediction and explanation of the effects of nano-morphology on sensor response. Amorphous silica demonstrated a larger potentiometric response than an equivalent crystalline silica model due to increased sodium adsorption, in agreement with experiments showing improved sensor response with nano-texturing. We provide proof-of-concept that molecular dynamics can be used as a complementary tool for potentiometric biosensor response prediction. Effects that are conventionally neglected, such as surface morphology, water polarisation, biomolecule dynamics and finite-size effects, are explicitly modelled.

JPRS Report, Soviet Union, Kommunist, No. 7, May 1987

DTIC Science & Technology

1987-08-13

to the Editors Party Work and Education (V. Shirshov) 50 Scientific Research Institute or Design Bureau? (Yu. Belyayev) 52 The Artist and... research institutes are actual design or technological bureaus judging by the nature of their work and the qualifications of their personnel. In...bureaus while rolling mills or construction machinery are designed by scientific research institutes? This lowers the responsibility of the

Toward a Fast-Response Active Turbine Tip Clearance Control

NASA Technical Reports Server (NTRS)

Melcher, Kevin J.; Kypuros, Javier A.

2003-01-01

This paper describes active tip clearance control research being conducted by NASA to improve turbine engine systems. The target application for this effort is commercial aircraft engines. However, technologies developed for clearance control can benefit a broad spectrum of current and future turbomachinery. The first portion of the paper addresses the research from a programmatic viewpoint. Recent studies that provide motivation for the work, identification of key technologies, and NASA's plan for addressing deficiencies in the technologies are discussed. The later portion of the paper drills down into one of the key technologies by presenting equations and results for a preliminary dynamic model of the tip clearance phenomena.

The value of inter-professional education: a comparative study of dental technology students' perceptions across four countries.

PubMed

Evans, J; Henderson, A J; Sun, J; Haugen, H; Myhrer, T; Maryan, C; Ivanow, K N; Cameron, A; Johnson, N W

2015-04-24

The ability to function as an effective member of a dental care team is a highly desirable--frequently mandated--attribute of dental technology (DT) graduates. Currently, there is little rigorous examination of how the learning of team-working skills might best be structured in a DT curriculum. This research compares DT curricula, and students' attitudes and perceptions regarding collaboration in practice, from four countries. Students (n=376) were invited to complete an education profile questionnaire, and the standardised measure--the shared learning scale. There were 196 (52%) responses. Students given opportunities to engage with others had better perceptions of inter-professional learning (IPL). Most believed that team-work and collaborative skills were best acquired by learning together with other dental care professionals, preferably sharing cases for real patients. Curricula should maximise opportunities for dental technology students to experience authentic IPL. Collaboration and team-work needs to be embedded through the whole undergraduate programme.

JPRS Report, Science & Technology USSR: Science & Technology Policy.

DTIC Science & Technology

1988-04-06

YESTESTVOZNANIYA I TEKHNIKI, No 3, Mar 87] 15 Work of Nadezhnost mashin Interbranch Complex [K. Frolov et al; NTR: PROBLEMYIRESHEN1YA, No 21, 3-16 Nov 86...Equipment By Rotor Complex [L. Koshkin; PLANOVOYE KHOZYAYSTVO, No 3, Mar 87] 29 Training, Use of Engineers Severely Criticized [V.G. Aynshteyn; ZNANIYE... complex systems, were painful lessons. In other words, the social role and, let us stress, the social responsibility of science today have increased

"Ain't no one here but us social forces": constructing the professional responsibility of engineers.

PubMed

Davis, Michael

2012-03-01

There are many ways to avoid responsibility, for example, explaining what happens as the work of the gods, fate, society, or the system. For engineers, "technology" or "the organization" will serve this purpose quite well. We may distinguish at least nine (related) senses of "responsibility", the most important of which are: (a) responsibility-as-causation (the storm is responsible for flooding), (b) responsibility-as-liability (he is the person responsible and will have to pay), (c) responsibility-as-competency (he's a responsible person, that is, he's rational), (d) responsibility-as-office (he's the responsible person, that is, the person in charge), and (e) a responsibility-as-domain-of-tasks (these are her responsibilities, that is, the things she is supposed to do). For all but the causal sense of responsibility, responsibility may be taken (in a relatively straightforward sense)-and generally is. Why then would anyone want to claim that certain technologies make it impossible to attribute responsibility to engineers (or anyone else)? In this paper, I identify seven arguments for that claim and explain why each is fallacious. The most important are: (1) the argument from "many hands", (2) the argument from individual ignorance, and (3) the argument from blind forces. Each of these arguments makes the same fundamental mistake, the assumption that a certain factual situation, being fixed, settles responsibility, that is, that individuals, either individually or by some group decision, cannot take responsibility. I conclude by pointing out the sort of decisions (and consequences) engineers have explicitly taken responsibility for and why taking responsibility for them is rational, all things considered. There is no technological bar to such responsibility. © Springer Science+Business Media B.V. 2010

Survey on the use of CAD-CAM technology by UK and Irish dental technicians.

PubMed

Blackwell, E; Nesbit, M; Petridis, H

2017-05-12

Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dental technicians' use and reporting of this technology.Purpose The aim of this cross sectional survey was to identify the extent digital technology has infiltrated the workplace and to investigate the factors affecting the use of CAD-CAM technology by dental laboratory technicians within Ireland and the UK.Materials and methods A web-based questionnaire was composed (Opinio, Object Planet Inc. Oslo, Norway) and distributed to UK and Irish dental technicians. Answers to all questions were anonymous and grouped such that general information was gathered initially, followed by branching of the survey into two sections depending on whether or not the respondent worked with CAD-CAM technology. Results were compiled and statistical analysis (Fisher's Exact test, SPSS, IBM, Armonk, New York, USA) was performed in order to investigate any correlation between various demographic variables and the answers provided.Results The survey was distributed to 760 UK technicians and 77 Irish technicians. The total number of completed surveys was 105, which yielded a total response rate of 14%. Most technicians reported using some form of CAD/CAM aspect in the workflow, and this was more significant for technicians working in large laboratories. Most training received was company-led. Large laboratories were also significantly correlated with less outsourcing of CAD/CAM work and a change in dental material use leading to the increase of zirconia and the decrease of noble alloys. Dental technicians did not report any significant change in working relationships and staffing as a result of CAD/CAM incorporation. High initial investment cost was the most common reason quoted from non-users, along with the lack of such technology in their working environment.

WMD first response: requirements, emerging technologies, and policy implications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vergino, E S; Hoehn, W E

2000-06-19

In the US today, efforts are underway to defend against the possible terrorist use of weapons of mass destruction (WMD) against US cities. These efforts include the development and adaptation of technologies to support prevention and detection, to defend against a possible attack, and, if these fail, to provide both mitigation responses and attribution for a WMD incident. Technologies under development span a range of systems, from early detection and identification of an agent or explosive, to diagnostic and systems analysis tools; and to forensic analysis for law enforcement. Also, many techniques and tools that have been developed for othermore » applications are being examined to determine whether, with some modification, they could be of use by the emergency preparedness, public health, and law enforcement communities. However, anecdotal evidence suggests the existence of a serious disconnect between the technology development communities and these user communities. This disconnect arises because funding for technology development is derived primarily from sources (principally federal agencies) distant from the emergency response communities, which are predominantly state, county, or local entities. Moreover, the first responders with whom we have worked candidly admit that their jurisdictions have been given, or have purchased for them, a variety of technological devices, typically without consulting the emergency responders about their utility. In private discussions, emergency responders derisively refer to these as a closet full of useless toys. Technology developers have many new and relevant technologies currently in the development pipeline, but most have not been adequately vetted against the field needs or validated for field use. The Center for Global Security Research at the Lawrence Livermore National Laboratory and the Sam Nunn School of International Affairs at the Georgia Institute of Technology recently sponsored a two-day workshop to bring together some 50 representatives of the emergency response, technology development, and policy communities. Participating in this workshop were first responders (representing law enforcement, public health, and emergency response personnel from Los Angeles County, Salt Lake City, Atlanta, and London, England), technology developers from US government laboratories and universities, and policymakers from both the executive and legislative branches of the federal government. The workshop had several objectives. First, we wanted the emergency responders to define the utility of various technologies and tools currently available for first response to a WMD event. Second, we expected the workshop to provide input to the technologists directly from the field users, regarding their special requirements for, and constraints on the use of, new emergency response technologies. Third, we planned to expose the first responders to the types of new technologies under development and allow them the opportunity to ask questions and voice their needs. Finally, we planned to provide recommendations to policymakers for new directions for development and investment of technology.« less

Hybrid Wing Body Multi-Bay Test Article Analysis and Assembly Final Report

NASA Technical Reports Server (NTRS)

Velicki, Alexander; Hoffman, Krishna; Linton, Kim A.; Baraja, Jaime; Wu, Hsi-Yung T.; Thrash, Patrick

2017-01-01

This report summarizes work performed by The Boeing Company, through its Boeing Research & Technology organization located in Huntington Beach, California, under the Environmentally Responsible Aviation (ERA) project. The report documents work performed to structurally analyze and assemble a large-scale Multi-bay Box (MBB) Test Article capable of withstanding bending and internal pressure loadings representative of a Hybrid Wing Body (HWB) aircraft. The work included fabrication of tooling elements for use in the fabrication and assembly of the test article.

Elementary Science Literature Review

ERIC Educational Resources Information Center

Gustafson, Brenda; MacDonald, Dougal; d'Entremont, Yvette

2007-01-01

This report presents a literature review of elementary science and design technology education research. The review is intended to provide direction to the elementary science working groups charged with the responsibility to revise the "Alberta Elementary Science Program" (1996) by reflecting current ideas reported in research…

Research and Technology at the John F. Kennedy Space Center 1993

NASA Technical Reports Server (NTRS)

1993-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1993 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. Major areas of research include material science, advanced software, industrial engineering, nondestructive evaluation, life sciences, atmospheric sciences, environmental technology, robotics, and electronics and instrumentation.

Please respond ASAP: workplace telepressure and employee recovery.

PubMed

Barber, Larissa K; Santuzzi, Alecia M

2015-04-01

Organizations rely heavily on asynchronous message-based technologies (e.g., e-mail) for the purposes of work-related communications. These technologies are primary means of knowledge transfer and building social networks. As a by-product, workers might feel varying levels of preoccupations with and urges for responding quickly to messages from clients, coworkers, or supervisors--an experience we label as workplace telepressure. This experience can lead to fast response times and thus faster decisions and other outcomes initially. However, research from the stress and recovery literature suggests that the defining features of workplace telepressure interfere with needed work recovery time and stress-related outcomes. The present set of studies defined and validated a new scale to measure telepressure. Study 1 tested an initial pool of items and found some support for a single-factor structure after problematic items were removed. As expected, public self-consciousness, techno-overload, and response expectations were moderately associated with telepressure in Study 1. Study 2 demonstrated that workplace telepressure was distinct from other personal (job involvement, affective commitment) and work environment (general and ICT work demands) factors and also predicted burnout (physical and cognitive), absenteeism, sleep quality, and e-mail responding beyond those factors. Implications for future research and workplace practices are discussed. (c) 2015 APA, all rights reserved).

[The eye of technology and the well being of women and men in Icelandic work places].

PubMed

Rafnsdóttir, Guobjörg Linda; Tómasson, Kristinn; Guomundsdóttir, Margrét Lilja

2005-11-01

The study assessed the association between working under surveillance and electronic performance monitoring and the well-being among women and men in six Icelandic workplaces. In the time period from February to April 2003, a questionnaire based on the General Nordic Questionnaire for Psychological and Social Factors at Work was delivered to 1369 employees in six companies where different methods of electronic performance monitoring (EPM) are used. The data was analyzed using odds ratio and logistical regression. The response rate was 72%, with close to equal participation of men and women. The employees who were working under EPM were more likely to have poor psychosocial work-environment, to have experienced significant stress recently, to be mentally exhausted at the end of the workday, to have significant sleep difficulties and to be dissatisfied in their job. The development of the information and communication technology that allows employers and managers to monitor and collect different electronic data about the work process and productivity of the workers makes it important to follow the health condition of those who work under electronic performance monitoring.

Research and technology 1995 annual report

NASA Technical Reports Server (NTRS)

1995-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1995 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as technology transfer activities. Major areas of research include environmental engineering, automation, robotics, advanced software, materials science, life sciences, mechanical engineering, nondestructive evaluation, and industrial engineering.

Queer in STEM: Workplace Experiences Reported in a National Survey of LGBTQA Individuals in Science, Technology, Engineering, and Mathematics Careers.

PubMed

Yoder, Jeremy B; Mattheis, Allison

2016-01-01

A survey of individuals working in science, technology, engineering, and mathematics (STEM) fields who identify as lesbian, gay, bisexual, trans*, queer, or asexual (LGTBQA) was administered online in 2013. Participants completed a 58-item questionnaire to report their professional areas of expertise, levels of education, geographic location, and gender and sexual identities and rated their work and social communities as welcoming or hostile to queer identities. An analysis of 1,427 responses to this survey provided the first broad portrait of this population, and it revealed trends related to workplace practices that can inform efforts to improve queer inclusivity in STEM workplaces.

The Microcomputer: Technological Innovation and Transfer

DTIC Science & Technology

1975-12-16

interest: • How does a naw technology eventually become embodied in user applications? • How fast is this transition effected ? • Dues the innovation...a " bandwagon " response. When a major new component begins to enjoy substantial market penetration, or when it becomes apparent that a component...existing sockets and work exactly as if Brand 1 was still there," only better. ■ •’■■■ ^ ’ — - wmmt*aim^*~^f*m**~immi**^immmmil 1

Technology Transfer

NASA Technical Reports Server (NTRS)

Bullock, Kimberly R.

1995-01-01

The development and application of new technologies in the United States has always been important to the economic well being of the country. The National Aeronautics and Space Administration (NASA) has been an important source of these new technologies for almost four decades. Recently, increasing global competition has emphasized the importance of fully utilizing federally funded technologies. Today NASA must meet its mission goals while at the same time, conduct research and development that contributes to securing US economic growth. NASA technologies must be quickly and effectively transferred into commercial products. In order to accomplish this task, NASA has formulated a new way of doing business with the private sector. Emphasis is placed on forming mutually beneficial partnerships between NASA and US industry. New standards have been set in response to the process that increase effectiveness, efficiency, and timely customer response. This summer I have identified potential markets for two NASA inventions: including the Radially Focused Eddy Current Sensor for Characterization of Flaws in Metallic Tubing and the Radiographic Moire. I have also worked to establish a cooperative program with TAG, private industry, and a university known as the TAG/Industry/Academia Program.

Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turteltaub, K W; Hartman-Siantar, C; Easterly, C

2005-10-03

A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus ofmore » gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of technology today, promising emerging technologies and references for further reading.« less

Productive Skills for Process Operatives. Skills Review.

ERIC Educational Resources Information Center

Giles, L.; Kodz, J.; Evans, C.

A study of process operatives examined the developments in processing work in 20 organizations within the chemical and food and drink processing industries. Seven exploratory interviews were followed by 20 employer interviews. Technological innovations caused job losses and layoffs. Organizational responses adopted to meet increasing competitive…

Change and Innovative Response

ERIC Educational Resources Information Center

Steele, John E.

1971-01-01

The most important quality that placement and the employment community can develop in the coming decade is the ability to respond with innovation, using intelligent and flexible methods to assimilate new technology, fulfill emerging social attitudes, and utilize college graduates in a larger spectrum of satisfying work. (Author)

Assessing Creative Problem-Solving with Automated Text Grading

ERIC Educational Resources Information Center

Wang, Hao-Chuan; Chang, Chun-Yen; Li, Tsai-Yen

2008-01-01

The work aims to improve the assessment of creative problem-solving in science education by employing language technologies and computational-statistical machine learning methods to grade students' natural language responses automatically. To evaluate constructs like creative problem-solving with validity, open-ended questions that elicit…

An Optical Method for the In-Vivo Characterization of the Biomechanical Response of the Right Ventricle.

PubMed

Soltani, A; Lahti, J; Järvelä, K; Curtze, S; Laurikka, J; Hokka, M; Kuokkala, V-T

2018-05-01

The intraoperative in-vivo mechanical function of the left ventricle has been studied thoroughly using echocardiography in the past. However, due to technical and anatomical issues, the ultrasound technology cannot easily be focused on the right side of the heart during open-heart surgery, and the function of the right ventricle during the intervention remains largely unexplored. We used optical imaging and digital image correlation for the characterization of the right ventricle motion and deformation during open-heart surgery. This work is a pilot study focusing on one patient only with the aim of establishing the framework for long term research. These experiments show that optical imaging and the analysis of the images can be used to obtain similar parameters, and partly at higher accuracy, for describing the mechanical functioning of the heart as the ultrasound technology. This work describes the optical imaging based method to characterize the mechanical response of the heart in-vivo, and offers new insight into the mechanical function of the right ventricle.

Flight deck automation: Promises and realities

NASA Technical Reports Server (NTRS)

Norman, Susan D. (Editor); Orlady, Harry W. (Editor)

1989-01-01

Issues of flight deck automation are multifaceted and complex. The rapid introduction of advanced computer-based technology onto the flight deck of transport category aircraft has had considerable impact both on aircraft operations and on the flight crew. As part of NASA's responsibility to facilitate an active exchange of ideas and information among members of the aviation community, a NASA/FAA/Industry workshop devoted to flight deck automation, organized by the Aerospace Human Factors Research Division of NASA Ames Research Center. Participants were invited from industry and from government organizations responsible for design, certification, operation, and accident investigation of transport category, automated aircraft. The goal of the workshop was to clarify the implications of automation, both positive and negative. Workshop panels and working groups identified issues regarding the design, training, and procedural aspects of flight deck automation, as well as the crew's ability to interact and perform effectively with the new technology. The proceedings include the invited papers and the panel and working group reports, as well as the summary and conclusions of the conference.

Rationing nurses: Realities, practicalities, and nursing leadership theories.

PubMed

Fast, Olive; Rankin, Janet

2018-04-01

In this paper, we examine the practicalities of nurse managers' work. We expose how managers' commitments to transformational leadership are undermined by the rationing practices and informatics of hospital reform underpinned by the ideas of new public management. Using institutional ethnography, we gathered data in a Canadian hospital. We began by interviewing and observing frontline leaders, nurse managers, and expanded our inquiry to include interviews with other nurses, staffing clerks, and administrators whose work intersected with that of nurse managers. We learned how nurse managers' responsibility for staffing is accomplished within tightening budgets and a burgeoning suite of technologies that direct decisions about whether or not there are enough nurses. Our inquiry explicates how technologies organize nurse managers to put aside their professional knowledge. We describe professionally committed nurse leaders attempting to activate transformational leadership and show how their intentions are subsumed within information systems. Seen in light of our analysis, transformational leadership is an idealized concept within which managers' responsibilities are shaped to conform to institutional purposes. © 2017 John Wiley & Sons Ltd.

Automated entry technologies for confined space work activities: A survey.

PubMed

Botti, Lucia; Ferrari, Emilio; Mora, Cristina

2017-04-01

Work in confined spaces poses a significant risk to workers and rescuers involved in the emergency response when an accident occurs. Despite several standards and regulations define the safety requirements for such activities, injuries, and fatalities still occur. Furthermore, the on-site inspections after accidents often reveal that both employers and employees fail to implement safe entry procedures. Removing the risk is possible by avoiding the worker entry, but many activities require the presence of the operator inside the confined space to perform manual tasks. The following study investigates the available technologies for hazardous confined space work activities, e.g., cleaning, inspecting, and maintenance tasks. The aim is to provide a systematic review of the automated solutions for high-risk activities in confined spaces, considering the non-man entry as the most effective confined space safety strategy. Second, this survey aims to provide suggestions for future research addressing the design of new technologies. The survey consists of about 60 papers concerning innovative technologies for confined space work activities. The document review shows that several solutions have been developed and automation can replace the workers for a limited number of hazardous tasks. Several activities still require the manual intervention due to the complex characteristics of confined spaces, e.g., to remove the remains of the automatic cleaning process from the bottom of a tank. The results show that available technologies require more flexibility to adapt to such occupational environments and further research is needed.

Low-Dimensional Nanomaterials and Molecular Dielectrics for Radiation-Hard Electronics

NASA Astrophysics Data System (ADS)

McMorrow, Julian

The electronic materials research driving Moore's law has provided several decades of increasingly powerful yet simultaneously miniaturized computer technologies. As we approach the physical and practical limits of what can be accomplished with silicon electronics, we look to new materials to drive innovation in future electronic applications. New materials paradigms require the development of understanding from first principles to the demonstration of applications that comes with mature technologies. Semiconducting single-walled carbon nanotubes (SWCNTs), single- and few-layer molybdenum disulfide (MoS2) and self-assembled nanodielectric (SAND) gate materials have all made significant impacts in the research field of unconventional electronic materials. The materials selection, interfaces between materials, processing steps to assemble them, and their interaction with their environment all have significant bearing on the operation of the overall device. Operating in harsh radiation environments, like those of satellites orbiting the Earth, present unique challenges to the functionality and reliability of electronic devices. Because the future of space-bound electronics is often informed by the technology of terrestrial devices, a proactive approach is adopted to identify and understand the radiation response of new materials systems as they emerge and develop. The work discussed here drives the innovation and development of multiple nanomaterial based electronic technologies while simultaneously exploring their relevant radiation response mechanisms. First, collaborative efforts result in the demonstration of a SWCNT-based circuit technology that is solution processed, large-area, and compatible with flexible substrates. The statistical characterization of SWCNT transistors enables the development of robust doping and encapsulation schemes, which make the SWCNT circuits stable, scalable, and low-power. These SWCNTs are then integrated into static random access memory (SRAM) cells, an accomplishment that illustrates the technological relevance of this work by implementing a highly utilized component of modern day computing. Next, these SRAM devices demonstrate functionality as true random number generators (TRNGs), which are critical components in cryptography and encryption. The randomness of these SWCNT TRNGs is verified by a suite of statistical tests. This achievement has implications for securing data and communication in future solution-processed, large-area, flexible electronics. The unprecedented integration achieved by the underlying SWCNT doping and encapsulation motivates the study of this technology in a radiation environment. Doing so results in an understanding of the fundamental charge trapping mechanisms responsible for the radiation response in this system. The integrated nature of these devices enables, for the first time, the observation of system-level effects in a SWCNT integrated circuit technology. This technology is found to be total ionizing dose-hard, a promising result for the adoption of SWCNTs in future space-bound applications. Compared to SWCNTs, the field of MoS2 electronics is relatively nascent. As a result, studies of radiation effects in MoS2 devices focus on the fundamental mechanisms at play in the materials system. Here, we reveal the critical role of atmospheric adsorbates in the radiation effects of MoS2 transistors by measuring their response to vacuum ultraviolet radiation. These results highlight the importance of controlling the atmosphere of MoS2 devices during irradiation. Furthermore, we make recommendations for radiation-hard MoS2-based devices in the future as the technology continues to mature. One such recommendation is the incorporation of specialized dielectrics with proven radiation hardness. To this end, we address the materials integration challenge of incorporating SAND gate dielectrics on arbitrary substrates. We explore a novel approach for preparing metal substrates for SAND deposition, supporting the SAND superlattice structure and its superlative electronic properties on a metal surface. This result is critical for conducting fundamental transport studies when integrating SAND with novel semiconductor materials, as well as enabling complex circuit integration and SAND on flexible substrates. Altogether, these works drive the integration of novel nanoelectronic materials for future electronics while providing an understanding of their varying radiation response mechanisms to enable their adoption in future space-bound applications.

Precision engineering: an evolutionary perspective.

PubMed

Evans, Chris J

2012-08-28

Precision engineering is a relatively new name for a technology with roots going back over a thousand years; those roots span astronomy, metrology, fundamental standards, manufacturing and money-making (literally). Throughout that history, precision engineers have created links across disparate disciplines to generate innovative responses to society's needs and wants. This review combines historical and technological perspectives to illuminate precision engineering's current character and directions. It first provides us a working definition of precision engineering and then reviews the subject's roots. Examples will be given showing the contributions of the technology to society, while simultaneously showing the creative tension between the technological convergence that spurs new directions and the vertical disintegration that optimizes manufacturing economics.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piette, Mary Ann

California needs new, responsive, demand-side energy technologies to ensure that periods of tight electricity supply on the grid don't turn into power outages. Led by Berkeley Lab's Mary Ann Piette, the California Energy Commission (through its Public Interest Energy Research Program) has established a Demand Response Research Center that addresses two motivations for adopting demand responsiveness: reducing average electricity prices and preventing future electricity crises. The research seeks to understand factors that influence "what works" in Demand Response. Piette's team is investigating the two types of demand response, load response and price response, that may influence and reduce the usemore » of peak electric power through automated controls, peak pricing, advanced communications, and other strategies.« less

Saving Power at Peak Hours (LBNL Science at the Theater)

ScienceCinema

Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2018-05-23

California needs new, responsive, demand-side energy technologies to ensure that periods of tight electricity supply on the grid don't turn into power outages. Led by Berkeley Lab's Mary Ann Piette, the California Energy Commission (through its Public Interest Energy Research Program) has established a Demand Response Research Center that addresses two motivations for adopting demand responsiveness: reducing average electricity prices and preventing future electricity crises. The research seeks to understand factors that influence "what works" in Demand Response. Piette's team is investigating the two types of demand response, load response and price response, that may influence and reduce the use of peak electric power through automated controls, peak pricing, advanced communications, and other strategies.

What drives technology-based distractions? A structural equation model on social-psychological factors of technology-based driver distraction engagement.

PubMed

Chen, Huei-Yen Winnie; Donmez, Birsen

2016-06-01

With the proliferation of new mobile and in-vehicle technologies, understanding the motivations behind a driver's voluntary engagement with such technologies is crucial from a safety perspective, yet is complex. Previous literature either surveyed a large number of distractions that may be diverse, or too focuses on one particular activity, such as cell phone use. Further, earlier studies about social-psychological factors underlying driver distraction tend to focus on one or two factors in-depth, and those that examine a more comprehensive set of factors are often limited in their analyses methods. The present work considers a wide array of social-psychological factors within a structural equation model to predict their influence on a focused set of technology-based distractions. A better understanding of these facilitators can enhance the design of distraction mitigation strategies. We analysed survey responses about three technology-based driver distractions: holding phone conversations, manually interacting with cell phones, and adjusting the settings of in-vehicle technology, as well as responses on five social-psychological factors: attitude, descriptive norm, injunctive norm, technology inclination, and a risk/sensation seeking personality. Using data collected from 525 drivers (ages: 18-80), a structural equation model was built to analyse these social-psychological factors as latent variables influencing self-reported engagement in these three technology-based distractions. Self-reported engagement in technology-based distractions was found to be largely influenced by attitudes about the distractions. Personality and social norms also played a significant role, but technology inclination did not. A closer look at two age groups (18-30 and 30+) showed that the effect of social norms, especially of injunctive norm (i.e., perceived approvals), was less prominent in the 30+ age group, while personality remained a significant predictor for the 30+ age group but marginally significant for the younger group. Findings from this work provide insights into the social-psychological factors behind intentional engagement in technology-based distractions and in particular suggesting that these factors may be sensitive to demographic differences. Copyright © 2016. Published by Elsevier Ltd.

AdaNET research plan

NASA Technical Reports Server (NTRS)

Mcbride, John G.

1990-01-01

The mission of the AdaNET research effort is to determine how to increase the availability of reusable Ada components and associated software engineering technology to both private and Federal sectors. The effort is structured to define the requirements for transfer of Federally developed software technology, study feasible approaches to meeting the requirements, and to gain experience in applying various technologies and practices. The overall approach to the development of the AdaNET System Specification is presented. A work breakdown structure is presented with each research activity described in detail. The deliverables for each work area are summarized. The overall organization and responsibilities for each research area are described. The schedule and necessary resources are presented for each research activity. The estimated cost is summarized for each activity. The project plan is fully described in the Super Project Expert data file contained on the floppy disk attached to the back cover of this plan.

QUEST: Qualifying Environmentally Sustainable Technologies

NASA Technical Reports Server (NTRS)

2006-01-01

Over the years, pollution prevention has proven to be a means to comply with environmental regulations, improve product performance and reduce costs. The NASA Acquisition Pollution Prevention (AP2) Program was created to help individual NASA Centers and programs work together to evaluate and adopt environmentally preferable technologies and practices. The AP2 Program accomplishes its mission using a variety of tools such as networking, information/technology exchange and partnering. Due to its extensive network of contacts, the AP2 Program is an excellent resource for finding existing solutions to problems. If no solution is readily known, the AP2 Program works to identify potential solutions and partners for demonstration/ validation projects. Partnering to prevent pollution is a cornerstone of NASA's prime mission and the One NASA Initiative. This annual newsletter highlights some of our program's collaborative efforts. I believe you will discover how the AP2 Program is responsive in meeting the Agency's environmental management strategic plans.

Oxide_Oxide Ceramic Matrix Composite (CMC) Exhaust Mixer Development in the NASA Environmentally Responsible Aviation (ERA) Project

NASA Technical Reports Server (NTRS)

Kiser, J. Douglas; Bansal, Narottam P.; Szelagowski, James; Sokhey, Jagdish; Heffernan, Tab; Clegg, Joseph; Pierluissi, Anthony; Riedell, Jim; Wyen, Travis; Atmur, Steven;

15 CFR 287.3 - Responsibilities of the National Institute of Standards and Technology.

Code of Federal Regulations, 2014 CFR

2014-01-01

... publishing policies and guidance on conformity assessment related issues; collects and disseminates... awareness of the importance of conformity assessment and nature and extent of national and international... government agency, work with that state agency to reduce duplication and complexity in state conformity...

15 CFR 287.3 - Responsibilities of the National Institute of Standards and Technology.

Code of Federal Regulations, 2013 CFR

2013-01-01

... publishing policies and guidance on conformity assessment related issues; collects and disseminates... awareness of the importance of conformity assessment and nature and extent of national and international... government agency, work with that state agency to reduce duplication and complexity in state conformity...

15 CFR 287.3 - Responsibilities of the National Institute of Standards and Technology.

Code of Federal Regulations, 2012 CFR

2012-01-01

... publishing policies and guidance on conformity assessment related issues; collects and disseminates... awareness of the importance of conformity assessment and nature and extent of national and international... government agency, work with that state agency to reduce duplication and complexity in state conformity...

Opening Up High Technology Careers to Women.

ERIC Educational Resources Information Center

Bumstead, Richard

1981-01-01

Describes a program that aims at increasing the number of women technicians in computer and other electronics industries. Discusses how more women are entering the computer field in Massachusetts, the stigma of technical work, typical assignments, lack of short-term courses, and recent responses to needs. (CT)

Business Models for Cost Sharing & Capability Sustainment

DTIC Science & Technology

2012-08-18

digital technology into existing mechanical products and their supporting processes can only work correctly if the firm carrying it out changes its entire...average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed...Capability Sustainment 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK

Development of Medical Technology for Contingency Response to Marrow Toxic Agents

DTIC Science & Technology

2015-10-02

authored three peer-reviewed manuscripts: o a manuscript in press for Leukemia on response to the Fukushima Daiichi nuclear power plant incident o a...outcomes following unrelated adult donor transplantation. Continually working to increase the genetic diversity of the Registry helps to ensure that more...for the 2012 tabletop exercise focused on patient triage and prioritization of care following detonation of a 1kT improvised nuclear device in a

Water and Air Measures That Make 'PureSense'

NASA Technical Reports Server (NTRS)

2005-01-01

Each day, we read about mounting global concerns regarding the ability to sustain supplies of clean water and to reduce air contamination. With water and air serving as life s most vital elements, it is important to know when these environmental necessities may be contaminated, in order to eliminate exposure immediately. The ability to respond requires an understanding of the conditions impacting safety and quality, from source to tap for water, and from outdoor to indoor environments for air. Unfortunately, the "time-to-know" is not immediate with many current technologies, which is a major problem, given the greater likelihood of risky situations in today s world. Accelerating alert and response times requires new tools, methods, and technologies. New solutions are needed to engage in more rapid detection, analysis, and response. This is the focus of a company called PureSense Environmental, Inc., which evolved out of a unique relationship with NASA. The need for real-time management and operations over the quality of water and air, and the urgency to provide new solutions, were reinforced by the events of September 11, 2001. This, and subsequent events, exposed many of the vulnerabilities facing the multiple agencies tasked with working in tandem to protect communities from harmful disaster. Much has been done since September 11 to accelerate responses to environmental contamination. Partnerships were forged across the public and private sectors to explore, test, and use new tools. Methods and technologies were adopted to move more astutely from proof-of-concept to working solutions.

A Response to Ages Past. Commentary on Harris, R. M., Michell, B.G. & Cooley. C. (1985) The Gender Gap in Library Education. (Journal of Education for Library and Information Science, 25(3), 167-176)

ERIC Educational Resources Information Center

Wellstead, Peta

2015-01-01

Much has changed in the information environment since the years of Harris' review. It is important to mention the significance of the impact of technology that has rendered the work of librarians and information workers almost unknowable to those teaching in the period 1965-1983. As a result of these reviews and technological changes, many…

Stroke education for nurses through a technology-enabled program.

PubMed

Carter, Lorraine; Rukholm, Ellen; Kelloway, Linda

2009-12-01

Today's nurse faces many challenges in the workplace. Required to keep up in a constantly changing knowledge-based environment, he or she must balance complex professional responsibilities, staffing shortages, and increased acuity among the patient population. Continuing education must, therefore, be highly flexible and responsive to the personal and professional needs of the nurse learner. Technology-supported continuing education is suggested to be an appropriate way of meeting the learning needs of busy working nurses. The Stroke Best Practices for Nursing project used three complementary and integrated educational technologies-a-Web-based learning site, Web casting (live and archived), and two-way interactive videoconferencing--to deliver a minicourse focused on best practice stroke care to nurses working in northeastern and northwestern Ontario, a geographical area of approximately 600 km. In total, 96 nurses participated in the educational part of the program; 46 of the 96 (47%) took part in the assessment of the program. On the basis of this assessment strategy and the nurses' requests for other programs that do not use traditional face-to-face classrooms and lecture, the value of using educational technologies in health-based continuing education was strongly identified. This article describes key components of the project and celebrates the partnership among the organizing stakeholders: faculty in the school of nursing at the Laurentian University, the West Greater Toronto Area Stroke Network, and the Ontario Telemedicine Network. The article further describes findings related to the program's impact on participants' perceptions of competence as caregivers for stroke patients, participants' confidence using technology for educational purposes, and participants' satisfaction with the overall program.

System Study: Technology Assessment and Prioritizing

NASA Technical Reports Server (NTRS)

2005-01-01

The objective of this NASA funded project is to assess and prioritize advanced technologies required to achieve the goals for an "Intelligent Propulsion System" through collaboration among GEAE, NASA, and Georgia Tech. Key GEAE deliverables are parametric response surface equations (RSE's) relating technology features to system benefits (sfc, weight, fuel burn, design range, acoustics, emission, etc...) and listings of Technology Impact Matrix (TIM) with benefits, debits, and approximate readiness status. TIM has been completed for GEAE and NASA proposed technologies. The combined GEAE and NASA TIM input requirement is shown in Table.1. In the course of building the RSE's and TIM, significant parametric technology modeling and RSE accuracy improvements were accomplished. GEAE has also done preliminary ranking of the technologies using Georgia Tech/GEAE USA developed technology evaluation tools. System level impact was performed by combining beneficial technologies with minimum conflict among various system figures of merits to assess their overall benefits to the system. The shortfalls and issues with modeling the proposed technologies are identified, and recommendations for future work are also proposed.

Nursing in a technological environment: nursing care in the operating room.

PubMed

Bull, Rosalind; FitzGerald, Mary

2006-02-01

Operating room nurses continue to draw criticism regarding the appropriateness of a nursing presence in the operating room. The technological focus of the theatre and the ways in which nurses in the theatre have shaped and reshaped their practice in response to technological change have caused people within and outside the nursing profession to question whether operating room nursing is a technological rather than nursing undertaking. This paper reports findings from an ethnographic study that was conducted in an Australian operating department. The study examined the contribution of nurses to the work of the operating room through intensive observation and ethnographic interviews. This paper uses selected findings from the study to explore the ways in which nurses in theatre interpret their role in terms of caring in a technological environment.

Policy and science of FMD control: the stakeholders' contribution to decision making. A call for integrated animal disease management.

PubMed

Marshall, M; Roger, P

Effective control of foot-and-mouth disease (FMD)--prevention, surveillance and response--requires integrated animal disease management as a cooperative effort between stakeholders, scientists and decision makers, at all levels: local, national, regional and international. This paper suggests a process and outlines specific critical issues that need to be addressed in order to best use the science and technology that is available now and to develop new technologies that will lead to significant improvements. The overall objective is not to allow the disease or the disease control measures to damage, violate or destroy public health, the environment, or the economy, or to allow politics to drive disease control policies at the expense of the ethical relationship between man and animals. Critical issues of prevention, surveillance and response policies are examined, and specific recommendations are made to reduce the risk or effect of natural and deliberate introductions. For prevention: a) rapid portable diagnostics and provision of vaccines to control and eradicate the reservoirs of disease. b) alerts, leading to increased controls at borders, animal movement restrictions and biosecurity on farms. For surveillance: a) reporting of unusual symptoms, rapid diagnostics and identification of patterns. b) enhanced role of geographic information systems (GIS) linked to an IT system. c) collection, storage and sharing of disease information. For response policies: a) the role and implementation of stamping out and of vaccination. b) simulation exercises with stakeholder participation. For all aspects of FMD control, consideration should be given to: a) the composition, responsibilities and role of the balanced, permanently operational Expert Group in EU member states as specified in the EU FMD Directive. b) establishment of a balanced, permanently operational European Expert Group. c) establishment of both a European and an International FMD Task Force. Stakeholders need access to accurate, up-to-date, unbiased information about the science of disease control, how the technologies work and can be used, and an assurance that the technologies best fit for the required purpose will be used. Researchers need to work together to avoid duplications and gaps in their research and to recognise the benefit of new, and sometimes innovative, technologies. They also need feedback from stakeholders on the acceptability and best use of the technologies. A process to achieve these goals through an EU funded collaborative research project will be described.

IDEAL-NM Annual Report: School Year 2013-2014

ERIC Educational Resources Information Center

New Mexico Public Education Department, 2015

2015-01-01

Innovative Digital Education and Learning-New Mexico (IDEAL-NM) was created in response to the 2005 Performance and Accountability Contract, "Making Schools Work" to leverage technology. On October 27, 2006, the statewide e-learning program that would implement a shared e-learning infrastructure using a single statewide learning…

Use of Software Tools in Teaching Relational Database Design.

ERIC Educational Resources Information Center

McIntyre, D. R.; And Others

1995-01-01

Discusses the use of state-of-the-art software tools in teaching a graduate, advanced, relational database design course. Results indicated a positive student response to the prototype of expert systems software and a willingness to utilize this new technology both in their studies and in future work applications. (JKP)

Armored Family of Vehicles (AFV) Automation and Communication. Resource Management Plan (ACRMP). Phase 1. Volume 15.

DTIC Science & Technology

1987-09-01

The AFV ACRMP is the Task Force Director’s (08) tool to manage command, control, communication (C3) automation system life cycle developments for the...responsibilities, development management, acquisition strategy, testing , life cycle support, technology assessment and work group relationships. ACRMP

Viewing Reading Recovery as a Restructuring Phenomenon

ERIC Educational Resources Information Center

Rinehart, James S.; Short, Paula Myrick

2010-01-01

This study investigated components of Reading Recovery that relate to a restructuring paradigm. Specifically, Reading Recovery was analyzed as a way to redesign teachers' work, empower teachers, and affect the core technology of teaching. Data were collected by a survey that consisted of open-ended questions and of categorical response items.…

A Call for Technology Leadership

ERIC Educational Resources Information Center

Schachter, Ron

2010-01-01

The responsibilities of the modern school superintendent may already seem boundless, from making the most of shrinking budgets, to working 21st-century skills into the K12 curriculum, to meeting the escalating standards of NCLB testing. But thanks to the initiatives of two national organizations dedicated to improving the use of educational…

Foundations for a Team Oriented Curriculum

ERIC Educational Resources Information Center

Neal, Brandi; Martz, Ben

2016-01-01

The business world today values collaboration and team work skills such as those found in the area of project management, business process reengineering, quality circles, etc. In response, the use of group projects permeates many curricula today with varying consequences and levels of success. Technology claims to enhance collaboration in…

Matching IT Jobs with IT People.

ERIC Educational Resources Information Center

Hilton, Margaret

Employers are experiencing difficulties filling vacancies for information technology (IT) positions because of rapid growth in the demand for IT workers, high turnover, and the unique characteristics of IT work. In response to the growing demand for IT workers, public and private education and training providers are expanding their offerings and…

New Perspectives on Mentoring. ERIC Digest No. 194.

ERIC Educational Resources Information Center

Kerka, Sandra

Like most institutions in a world of change, the practice of mentoring is being influenced by new forms of work, technology, and learning. Organizational trends such as downsizing, restructuring, teamwork, increased diversity, and individual responsibility for career development are contributing to a resurgent interest in mentoring in the 1990s.…

Quality Assurance Program Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halford, Vaughn Edward; Ryder, Ann Marie

Effective May 1, 2017, led by a new executive leadership team, Sandia began operating within a new organizational structure. National Technology and Engineering Solutions of Sandia (Sandia’s) Quality Assurance Program (QAP) was established to assign responsibilities and authorities, define workflow policies and requirements, and provide for the performance and assessment of work.

Vocational Baccalaureat Holders: What Positions in the Company?

ERIC Educational Resources Information Center

Eckert, Henry; Veneau, Patrick

1994-01-01

The French vocational baccalaureat was created in response to labor market changes and technological innovations of the early 1980s. Unlike France's general and technical baccalaureats, the vocational baccalaureat normally guarantees immediate entry into working life. It is generally prepared for in 2 years after an initial period of vocational…

Annual Adult Education Research Conference Proceedings (40th, DeKalb, Illinois, May 21-23, 1999).

ERIC Educational Resources Information Center

Rose, Amy, Comp.

Among 59 papers are the following:"Women's Transitions from Welfare to Paid Work and Education" (Andruske); "Sustaining Commitment to Social Responsibility" (Armstrong); "Investigation of How Faculty Learn to Teach at a Distance with Technology" (Armstrong); "Examined Life" (Baird); "Dynamics of Adult…

Using Social Media for Student Collaboration

ERIC Educational Resources Information Center

Tucker, Virginia

2015-01-01

The iGeneration is predisposed to communicating via social media, and oftentimes students' first instinct in classroom group work is to connect with members on social media. While some social networks allow for the creation of private groups, these students are still responsible for adapting the technology for this new purpose: collaborative…

Student Perceptions of a Wireless Audience Response System

ERIC Educational Resources Information Center

Walton, Abram; Homan, Scott; Naimi, Linda; Tomovic, Cynthia

2008-01-01

Purpose: The purpose of this paper is to identify and measure the perceptions and attitudes of students regarding the classroom performance system (CPS). Design/methodology/approach: The paper reviews a range of recently published (1993-2006) works on pedagogy and educational technology. A survey methodology was utilized to measure students'…

Teaching and Learning in the Global Village: Connect, Create, Collaborate, and Communicate

ERIC Educational Resources Information Center

Dwyer, Bernadette

2016-01-01

The world is increasingly interconnected through technology. In order to live and work in a global village our students need to develop global literacy. Global literacy incorporates a range of overlapping concepts including an advocacy dimension, global citizenship responsibility, and cultural and linguistic awareness. Further, global literacy…

Activity Schedules, Computer Technology, and Teaching Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Stromer, Robert; Kimball, Jonathan W.; Kinney, Elisabeth M.; Taylor, Bridget A.

2006-01-01

A review of selected literature suggests that integrating multimedia computer supports with activity schedules can be an effective way to teach students to manage their work, play, and skill-building activities independently. Activity schedules originally were a means of promoting independent execution of previously learned responses by using…

Adaptive infrared-reflecting systems inspired by cephalopods

NASA Astrophysics Data System (ADS)

Xu, Chengyi; Stiubianu, George T.; Gorodetsky, Alon A.

2018-03-01

Materials and systems that statically reflect radiation in the infrared region of the electromagnetic spectrum underpin the performance of many entrenched technologies, including building insulation, energy-conserving windows, spacecraft components, electronics shielding, container packaging, protective clothing, and camouflage platforms. The development of their adaptive variants, in which the infrared-reflecting properties dynamically change in response to external stimuli, has emerged as an important unmet scientific challenge. By drawing inspiration from cephalopod skin, we developed adaptive infrared-reflecting platforms that feature a simple actuation mechanism, low working temperature, tunable spectral range, weak angular dependence, fast response, stability to repeated cycling, amenability to patterning and multiplexing, autonomous operation, robust mechanical properties, and straightforward manufacturability. Our findings may open opportunities for infrared camouflage and other technologies that regulate infrared radiation.

Microstamped opto-mechanical actuator for tactile displays

NASA Astrophysics Data System (ADS)

Camargo, Carlos J.; Torras, Núria; Campanella, Humberto; Marshall, Jean E.; Zinoviev, Kirill; Campo, Eva M.; Terentjev, Eugene M.; Esteve, Jaume

2011-10-01

Over the last few years, several technologies have been adapted for use in tactile displays, such as thermo-pneumatic actuators, piezoelectric polymers and dielectric elastomers. None of these approaches offers high-performance for refreshable Braille display system (RBDS), due to considerations of weight, power efficiency and response speed. Optical actuation offers an attractive alternative to solve limitations of current-art technologies, allowing electromechanical decoupling, elimination of actuation circuits and remote controllability. Creating these opticallydriven devices requires liquid crystal - carbon nanotube (LC-CNT) composites that show a reversible shape change in response to an applied light. This work thus reports on novel opto-actuated Braille dots based on LC-CNT composite and silicon mold microstamping. The manufacturing approach succeeds on producing blisters according to the Braille standard for the visually impaired, by taking shear-aligned LC-CNT films and silicon stamps. For this application, we need to define specifically-shaped structures. Some technologies have succeeded on elastomer microstructuring. Nevertheless, they are not applicable for LC-CNT molding because they do not consider the stretching of the polymer which is required for LC-CNT fabrication. Our process demonstrates that composites micro-molding and their 3-D structuring is feasible by silicon-based stamping. Its work principle involves the mechanical stretching, allowing the LC mesogens alignment.

National Labs and Nuclear Emergency Response

NASA Astrophysics Data System (ADS)

Budil, Kimberly

2015-04-01

The DOE national laboratories, and in particular the three NNSA national security laboratories, have long supported a broad suite of national nuclear security missions for the U.S. government. The capabilities, infrastructure and base of expertise developed to support the U.S. nuclear weapons stockpile have been applied to such challenges as stemming nuclear proliferation, understanding the nuclear capabilities of adversaries, and assessing and countering nuclear threats including essential support to nuclear emergency response. This talk will discuss the programs that are underway at the laboratories and the essential role that science and technology plays therein. Nuclear scientists provide expertise, fundamental understanding of nuclear materials, processes and signatures, and tools and technologies to aid in the identification and mitigation of nuclear threats as well as consequence management. This talk will also discuss the importance of direct engagement with the response community, which helps to shape research priorities and to enable development of useful tools and techniques for responders working in the field. National Labs and Nuclear Emergency Response.

Oil spill response capabilities and technologies for ice-covered Arctic marine waters: A review of recent developments and established practices.

PubMed

Wilkinson, Jeremy; Beegle-Krause, C J; Evers, Karl-Ulrich; Hughes, Nick; Lewis, Alun; Reed, Mark; Wadhams, Peter

2017-12-01

Renewed political and commercial interest in the resources of the Arctic, the reduction in the extent and thickness of sea ice, and the recent failings that led to the Deepwater Horizon oil spill, have prompted industry and its regulatory agencies, governments, local communities and NGOs to look at all aspects of Arctic oil spill countermeasures with fresh eyes. This paper provides an overview of present oil spill response capabilities and technologies for ice-covered waters, as well as under potential future conditions driven by a changing climate. Though not an exhaustive review, we provide the key research results for oil spill response from knowledge accumulated over many decades, including significant review papers that have been prepared as well as results from recent laboratory tests, field programmes and modelling work. The three main areas covered by the review are as follows: oil weathering and modelling; oil detection and monitoring; and oil spill response techniques.

Exploring the association between social capital and depressive symptoms: results of a survey in German information and communication technology companies.

PubMed

Jung, Julia; Ernstmann, Nicole; Nitzsche, Anika; Driller, Elke; Kowalski, Christoph; Lehner, Birgit; Stieler-Lorenz, Brigitte; Friepörtner, Katharina; Schmidt, Anna; Pfaff, Holger

2012-01-01

This study examines the association between social capital at work and depressive symptoms in employees. Data for this cross-sectional study were collected through an online survey with the full population of employees from six companies in the German information and communication technology sector (response rate: 58.4%). A multivariate logistic regression analysis was performed. Results of data from a total of 328 employees suggest that, after controlling for sociodemographic factors, health awareness, and job strain, lower levels of perceived social capital at work are associated with the experience of depressive symptoms (OR = 0.76; 95% CI: 0.64-0.90). Our findings suggest that characteristics of high social capital at work, such as an established environment of trust and a sense of common values and convictions, could be an essential resource for preventing depressive disorders.

An academic medical center's response to widespread computer failure.

PubMed

Genes, Nicholas; Chary, Michael; Chason, Kevin W

2013-01-01

As hospitals incorporate information technology (IT), their operations become increasingly vulnerable to technological breakdowns and attacks. Proper emergency management and business continuity planning require an approach to identify, mitigate, and work through IT downtime. Hospitals can prepare for these disasters by reviewing case studies. This case study details the disruption of computer operations at Mount Sinai Medical Center (MSMC), an urban academic teaching hospital. The events, and MSMC's response, are narrated and the impact on hospital operations is analyzed. MSMC's disaster management strategy prevented computer failure from compromising patient care, although walkouts and time-to-disposition in the emergency department (ED) notably increased. This incident highlights the importance of disaster preparedness and mitigation. It also demonstrates the value of using operational data to evaluate hospital responses to disasters. Quantifying normal hospital functions, just as with a patient's vital signs, may help quantitatively evaluate and improve disaster management and business continuity planning.

Nanostructured ZnO films for potential use in LPG gas sensors

NASA Astrophysics Data System (ADS)

Latyshev, V. M.; Berestok, T. O.; Opanasyuk, A. S.; Kornyushchenko, A. S.; Perekrestov, V. I.

2017-05-01

The aim of the work was to obtain ZnO nanostructures with heightened surface area and to study relationship between formation method and gas sensor properties towards propane-butane mixture (LPG). In order to synthesize ZnO nanostructures chemical and physical formation methods have been utilized. The first one was chemical bath deposition technology and the second one magnetron sputtering of Zn followed by oxidation. Optimal method and technological parameters corresponding to formation of material with the highest sensor response have been determined experimentally. Dynamical gas sensor response at different temperature values and dependencies of the sensor sensitivity on the temperature at different LPG concentrations in air have been investigated. It has been found, that sensor response depends on the sample morphology and has the highest value for the structure consisting of thin nanowires. The factors that lead to the decrease in the gas sensor operating temperature have been determined.

Applying the Precaution Adoption Process Model to the Acceptance of Mine Safety and Health Technologies

PubMed Central

2018-01-01

Mineworkers are continually introduced to protective technologies on the job. Yet, their perceptions toward the technologies are often not addressed until they are actively trying to use them, which may halt safe technology adoption and associated work practices. This study explored management and worker perspectives toward three technologies to forecast adoption and behavioral intention on the job. Interviews and focus groups were conducted with 21 mineworkers and 19 mine managers to determine the adoption process stage algorithm for workers and managers, including perceived barriers to using new safety and health technologies. Differences between workers and managers were revealed in terms of readiness, perceptions, and initial trust in using technologies. Workers, whether they had or had not used a particular technology, still had negative perceptions toward its use in the initial introduction and integration at their mine site, indicating a lengthy time period needed for full adoption. The key finding from these results is that a carefully considered and extended introduction of technology for workers in Stage 3 (undecided to act) is most important to promote progression to Stage 5 (decided to act) and to avoid Stage 4 (decided not to act). In response, organizational management may need to account for workers’ particular stage algorithm, using the Precaution Adoption Process Model, to understand how to tailor messages about protective technologies, administer skill-based trainings and interventions that raise awareness and knowledge, and ultimately encourage safe adoption of associated work practices. PMID:29862314

Applying the Precaution Adoption Process Model to the Acceptance of Mine Safety and Health Technologies.

PubMed

Haas, Emily J

2018-03-01

Mineworkers are continually introduced to protective technologies on the job. Yet, their perceptions toward the technologies are often not addressed until they are actively trying to use them, which may halt safe technology adoption and associated work practices. This study explored management and worker perspectives toward three technologies to forecast adoption and behavioral intention on the job. Interviews and focus groups were conducted with 21 mineworkers and 19 mine managers to determine the adoption process stage algorithm for workers and managers, including perceived barriers to using new safety and health technologies. Differences between workers and managers were revealed in terms of readiness, perceptions, and initial trust in using technologies. Workers, whether they had or had not used a particular technology, still had negative perceptions toward its use in the initial introduction and integration at their mine site, indicating a lengthy time period needed for full adoption. The key finding from these results is that a carefully considered and extended introduction of technology for workers in Stage 3 (undecided to act) is most important to promote progression to Stage 5 (decided to act) and to avoid Stage 4 (decided not to act). In response, organizational management may need to account for workers' particular stage algorithm, using the Precaution Adoption Process Model, to understand how to tailor messages about protective technologies, administer skill-based trainings and interventions that raise awareness and knowledge, and ultimately encourage safe adoption of associated work practices.

Advances in the psychosocial treatment of addiction: the role of technology in the delivery of evidence-based psychosocial treatment.

PubMed

Marsch, Lisa A; Dallery, Jesse

2012-06-01

The clinical community has a growing array of psychosocial interventions with a strong evidence base available for the treatment of SUDs. Considerable opportunity exists for leveraging technology in the delivery of evidence-based interventions to promote widespread reach and impact of evidence-based care. Data from this line of research to date are promising, and underscore the potential public health impact of technology-based therapeutic tools. To fully realize the potential of technology-delivered interventions, several areas of inquiry remain important. First, scientifically sound strategies should be explored to ensure technology-based interventions are optimally designed to produce maximal behavior change. Second, efficient and effective methods should be identified to integrate technology-based interventions into systems of care in a manner that is most responsive to the needs of individual users. Third, payment, privacy, and regulatory systems should be refined and extended to go beyond electronic medical records and telehealth/distance care models, and support the deployment of technology-based systems to enhance the quality, efficiency and cost-effectiveness of care. Fourth, the mechanisms underlying behavior change derived from technology-based treatments should be explicated, including new mechanisms that may be tapped via novel, technology-based tools. Such work will be critical in isolating mechanisms that are useful in predicting treatment response, and in ensuring that key ingredients are present in technology-based interventions as they are made widely available.

NASA's aircraft icing technology program

NASA Technical Reports Server (NTRS)

Reinmann, John J.

1991-01-01

NASA' Aircraft Icing Technology program is aimed at developing innovative technologies for safe and efficient flight into forecasted icing. The program addresses the needs of all aircraft classes and supports both commercial and military applications. The program is guided by three key strategic objectives: (1) numerically simulate an aircraft's response to an in-flight icing encounter, (2) provide improved experimental icing simulation facilities and testing techniques, and (3) offer innovative approaches to ice protection. Our research focuses on topics that directly support stated industry needs, and we work closely with industry to assure a rapid and smooth transfer of technology. This paper presents selected results that illustrate progress towards the three strategic objectives, and it provides a comprehensive list of references on the NASA icing program.

Improving mathematics teaching and learning experiences for hard of hearing students with wireless technology-enhanced classrooms.

PubMed

Liu, Chen-Chung; Chou, Chien-Chia; Liu, Baw-Jhiune; Yang, Jui-Wen

2006-01-01

Hard of hearing students usually face more difficulties at school than other students. A classroom environment with wireless technology was implemented to explore whether wireless technology could enhance mathematics learning and teaching activities for a hearing teacher and her 7 hard of hearing students in a Taiwan junior high school. Experiments showed that the highly interactive communication through the wireless network increased student participation in learning activities. Students demonstrated more responses to the teacher and fewer distraction behaviors. Fewer mistakes were made in in-class course work because Tablet PCs provided students scaffolds. Students stated that the environment with wireless technology was desirable and said that they hoped to continue using the environment to learn mathematics.

Understanding the administrative regulation on occupational health and trend in China.

PubMed

Zhou, Zhijun

2018-03-27

With the immense economic growth and social development, China has gained worldwide attention. With the quick growth of industrialization, several international professionals are gaining interest in occupational management system and in the role of the Chinese Government in protecting the worker's health. The Law on Prevention and Control of Occupational Diseases and the Work Safety Law are the two most important laws in China, which highlight the responsibilities of the employer, employee, governmental agencies, authorized occupational health service agency, and other stakeholders. The State Council comprises two departments, namely, the State Administration on Work Safety (SAWS) and the National Health and Family Planning Commission (NHFPC), which are responsible for governing the occupational health work. A series of regulations and standards have been promulgated by the Chinese Government to encourage or instruct the employers to fulfill their responsibility; however, several issues persist related to occupational health work, including administrative, technological, and sociocultural aspects. At present, the Chinese Government wants to enhance the reform in both economic and administrative structures, and the adjustments for modifying and/or improving the occupational health regulatory system are expected. Notably, the occupational health work in China must be altered for better.

Understanding the administrative regulation on occupational health and trend in China

PubMed Central

Zhou, Zhijun

2017-01-01

With the immense economic growth and social development, China has gained worldwide attention. With the quick growth of industrialization, several international professionals are gaining interest in occupational management system and in the role of the Chinese Government in protecting the worker's health. The Law on Prevention and Control of Occupational Diseases and the Work Safety Law are the two most important laws in China, which highlight the responsibilities of the employer, employee, governmental agencies, authorized occupational health service agency, and other stakeholders. The State Council comprises two departments, namely, the State Administration on Work Safety (SAWS) and the National Health and Family Planning Commission (NHFPC), which are responsible for governing the occupational health work. A series of regulations and standards have been promulgated by the Chinese Government to encourage or instruct the employers to fulfill their responsibility; however, several issues persist related to occupational health work, including administrative, technological, and sociocultural aspects. At present, the Chinese Government wants to enhance the reform in both economic and administrative structures, and the adjustments for modifying and/or improving the occupational health regulatory system are expected. Notably, the occupational health work in China must be altered for better. PMID:29311440

Technology, normalisation and male sex work.

PubMed

MacPhail, Catherine; Scott, John; Minichiello, Victor

2015-01-01

Technological change, particularly the growth of the Internet and smart phones, has increased the visibility of male escorts, expanded their client base and diversified the range of venues in which male sex work can take place. Specifically, the Internet has relocated some forms of male sex work away from the street and thereby increased market reach, visibility and access and the scope of sex work advertising. Using the online profiles of 257 male sex workers drawn from six of the largest websites advertising male sexual services in Australia, the role of the Internet in facilitating the normalisation of male sex work is discussed. Specifically we examine how engagement with the sex industry has been reconstituted in term of better informed consumer-seller decisions for both clients and sex workers. Rather than being seen as a 'deviant' activity, understood in terms of pathology or criminal activity, male sex work is increasingly presented as an everyday commodity in the market place. In this context, the management of risks associated with sex work has shifted from formalised social control to more informal practices conducted among online communities of clients and sex workers. We discuss the implications for health, legal and welfare responses within an empowerment paradigm.

Type A behavior and work situation: associations with burnout and work engagement.

PubMed

Hallberg, Ulrika E; Johansson, Gunn; Schaufeli, Wilmar B

2007-04-01

The aim of the present study was to investigate Type A behavior as well as perceived work situation, and associations with burnout and work engagement. The associations in focus were investigated through hierarchical regressions in a sample (N= 329) of Swedish Information Communication Technology consultants. The findings indicated that both work situation and Type A behavior was correlated with work engagement and burnout; however, no interactions between Type A behavior and work situation were elicited. The main conclusion was that the achievement striving aspect of Type A behavior appears as "non-toxic" and is related only to work engagement. However, the irritability/impatience aspect appears to be responsible for burnout complaints among Type A individuals, possibly through negative effects of the mood itself than through perceived stress at work.

Technology Transfer: Marketing Tomorrow's Technology

NASA Technical Reports Server (NTRS)

Tcheng, Erene

1995-01-01

The globalization of the economy and the end of the Cold War have triggered many changes in the traditional practices of U.S. industry. To effectively apply the resources available to the United States, the federal government has firmly advocated a policy of technology transfer between private industry and government labs, in this case the National Aeronautics and Space Administration (NASA). NASA Administrator Daniel Goldin is a strong proponent of this policy and has organized technology transfer or commercialization programs at each of the NASA field centers. Here at Langley Research Center, the Technology Applications Group (TAG) is responsible for facilitating the transfer of Langley developed research and technology to U.S. industry. Entering the program, I had many objectives for my summer research with TAG. Certainly, I wanted to gain a more thorough understanding of the concept of technology transfer and Langley's implementation of a system to promote it to both the Langley community and the community at large. Also, I hoped to become more familiar with Langley's research capabilities and technology inventory available to the public. More specifically, I wanted to learn about the technology transfer process at Langley. Because my mentor is a member of Materials and Manufacturing marketing sector of the Technology Transfer Team, another overriding objective for my research was to take advantage of his work and experience in materials research to learn about the Advanced Materials Research agency wide and help market these developments to private industry. Through the various projects I have been assigned to work on in TAG, I have successfully satisfied the majority of these objectives. Work on the Problem Statement Process for TAG as well as the development of the Advanced Materials Research Brochure have provided me with the opportunity to learn about the technology transfer process from the outside looking in and the inside looking out. Because TAG covers all of the research efforts conducted at Langley, my studies with TAG were ab!e to provide me an excellent overview of Langley's contribution to the aeronautics industry.

From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

NASA Technical Reports Server (NTRS)

Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

1995-01-01

As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar Conditions; Electromagnetic Effects; Integrated Assessments and Databases. Specific technology development tasks will be solicited through a NASA Research Announcement to be released in May of 1994. The areas in which tasks are solicited include: (1) engineering environment definitions, (2) environments and effects design guidelines, (3) environments and effects assessment models and databases, and (4) flight/ground simulation/technology assessment data.

From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

NASA Astrophysics Data System (ADS)

Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

1995-02-01

As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar Conditions; Electromagnetic Effects; Integrated Assessments and Databases. Specific technology development tasks will be solicited through a NASA Research Announcement to be released in May of 1994. The areas in which tasks are solicited include: (1) engineering environment definitions, (2) environments and effects design guidelines, (3) environments and effects assessment models and databases, and (4) flight/ground simulation/technology assessment data.

Analyzing the threat of unmanned aerial vehicles (UAV) to nuclear facilities

DOE PAGES

Solodov, Alexander; Williams, Adam; Al Hanaei, Sara; ...

2017-04-18

Unmanned aerial vehicles (UAV) are among the major growing technologies that have many beneficial applications, yet they can also pose a significant threat. Recently, several incidents occurred with UAVs violating privacy of the public and security of sensitive facilities, including several nuclear power plants in France. The threat of UAVs to the security of nuclear facilities is of great importance and is the focus of this work. This paper presents an overview of UAV technology and classification, as well as its applications and potential threats. We show several examples of recent security incidents involving UAVs in France, USA, and Unitedmore » Arab Emirates. Further, the potential threats to nuclear facilities and measures to prevent them are evaluated. The importance of measures for detection, delay, and response (neutralization) of UAVs at nuclear facilities are discussed. An overview of existing technologies along with their strength and weaknesses are shown. Finally, the results of a gap analysis in existing approaches and technologies is presented in the form of potential technological and procedural areas for research and development. Furthermore based on this analysis, directions for future work in the field can be devised and prioritized.« less

National Institute of Justice (NIJ): improving the effectiveness of law enforcement via homeland security technology improvements (Keynote Address)

NASA Astrophysics Data System (ADS)

Morgan, John S.

2005-05-01

Law enforcement agencies play a key role in protecting the nation from and responding to terrorist attacks. Preventing terrorism and promoting the nation"s security is the Department of Justice"s number one strategic priority. This is reflected in its technology development efforts, as well as its operational focus. The National Institute of Justice (NIJ) is the national focal point for the research, development, test and evaluation of technology for law enforcement. In addition to its responsibilities in supporting day-to-day criminal justice needs in areas such as less lethal weapons and forensic science, NIJ also provides critical support for counter-terrorism capacity improvements in state and local law enforcement in several areas. The most important of these areas are bomb response, concealed weapons detection, communications and information technology, which together offer the greatest potential benefit with respect to improving the ability to law enforcement agencies to respond to all types of crime including terrorist acts. NIJ coordinates its activities with several other key federal partners, including the Department of Homeland Security"s Science and Technology Directorate, the Technical Support Working Group, and the Department of Defense.

Conditions for success in introducing telemedicine in diabetes foot care: a qualitative inquiry.

PubMed

Kolltveit, Beate-Christin Hope; Gjengedal, Eva; Graue, Marit; Iversen, Marjolein M; Thorne, Sally; Kirkevold, Marit

2017-01-01

The uptake of various telehealth technologies to deliver health care services at a distance is expanding; however more knowledge is needed to help understand vital components for success in using telehealth in different work settings. This study was part of a larger trial designed to investigate the effect of an interactive telemedicine platform. The platform consisted of a web based ulcer record linked to a mobile phone to provide care for people with diabetic foot ulcers in outpatient clinics in specialist hospital care in collaboration with primary health care. The aim of this qualitative study was to identify perceptions of health care professionals in different working settings with respect to facilitators to engagement and participation in the application of telemedicine. Ten focus groups were conducted with health care professionals and leaders in Western Norway between January 2014 and June 2015 using Interpretive Description, an applied qualitative research strategy. Four key conditions for success in using telemedicine as a new technology in diabetes foot care were identified: technology and training that were user-friendly; having a telemedicine champion in the work setting; the support of committed and responsible leaders; and effective communication channels at the organizational level. Successful larger scale implementation of telemedicine must involve consideration of complex contextual and organizational factors associated with different work settings. This form of new care technology in diabetes foot care often involves health care professionals working across different settings with different management systems and organizational cultures. Therefore, attention to the distinct needs of each staff group seems an essential condition for effective implementation.

Advancing Partnerships Towards an Integrated Approach to Oil Spill Response

NASA Astrophysics Data System (ADS)

Green, D. S.; Stough, T.; Gallegos, S. C.; Leifer, I.; Murray, J. J.; Streett, D.

2015-12-01

Oil spills can cause enormous ecological and economic devastation, necessitating application of the best science and technology available, and remote sensing is playing a growing critical role in the detection and monitoring of oil spills, as well as facilitating validation of remote sensing oil spill products. The FOSTERRS (Federal Oil Science Team for Emergency Response Remote Sensing) interagency working group seeks to ensure that during an oil spill, remote sensing assets (satellite/aircraft/instruments) and analysis techniques are quickly, effectively, appropriately, and seamlessly available to oil spills responders. Yet significant challenges remain for addressing oils spanning a vast range of chemical properties that may be spilled from the Tropics to the Arctic, with algorithms and scientific understanding needing advances to keep up with technology. Thus, FOSTERRS promotes enabling scientific discovery to ensure robust utilization of available technology as well as identifying technologies moving up the TRL (Technology Readiness Level). A recent FOSTERRS facilitated support activity involved deployment of the AVIRIS NG (Airborne Visual Infrared Imaging Spectrometer- Next Generation) during the Santa Barbara Oil Spill to validate the potential of airborne hyperspectral imaging to real-time map beach tar coverage including surface validation data. Many developing airborne technologies have potential to transition to space-based platforms providing global readiness.

The Maker Movement, the Promise of Higher Education, and the Future of Work

NASA Astrophysics Data System (ADS)

Wigner, Aubrey

The 21st century will be the site of numerous changes in education systems in response to a rapidly evolving technological environment where existing skill sets and career structures may cease to exist or, at the very least, change dramatically. Likewise, the nature of work will also change to become more automated and more technologically intensive across all sectors, from food service to scientific research. Simply having technical expertise or the ability to process and retain facts will in no way guarantee success in higher education or a satisfying career. Instead, the future will value those educated in a way that encourages collaboration with technology, critical thinking, creativity, clear communication skills, and strong lifelong learning strategies. These changes pose a challenge for higher education's promise of employability and success post-graduation. Addressing how to prepare students for a technologically uncertain future is challenging. One possible model for education to prepare students for the future of work can be found within the Maker Movement. However, it is not fully understood what parts of this movement are most meaningful to implement in education more broadly, and higher education in particular. Through the qualitative analysis of nearly 160 interviews of adult makers, young makers and young makers' parents, this dissertation unpacks how makers are learning, what they are learning, and how these qualities are applicable to education goals and the future of work in the 21st century. This research demonstrates that makers are learning valuable skills to prepare them for the future of work in the 21st century. Makers are learning communication skills, technical skills in fabrication and design, and developing lifelong learning strategies that will help prepare them for life in an increasingly technologically integrated future. This work discusses what aspects of the Maker Movement are most important for integration into higher education.

The proliferation of aerospace weapons technology: Ballistic missiles and the case of Brazil

NASA Astrophysics Data System (ADS)

Vossen, Terrence John

1993-04-01

The rationale behind the development of ballistic missile production in Brazil is examined by exploring the political, military, and economic determinants of ballistic missile demand in that country. To ascertain how Brazil developed missile production capabilities, the contributions of aerospace industries in industrialized states, the Brazilian space program, trade between less-developed countries, and illicit trade in missile technology are assessed. It is argued that missile development increasingly became a function of economic as opposed to security considerations, and that technologies transferred from developed country aerospace firms and Brazil's space program were primarily responsible for the creation of production capabilities. It is also contended that the proliferation of missile technology to Brazil was consistent with the workings of a system evident in the aerospace weapons technology market that sustains the horizontal spread of weapons production capabilities.

Public responses to water reuse - Understanding the evidence.

PubMed

Smith, H M; Brouwer, S; Jeffrey, P; Frijns, J

2018-02-01

Over the years, much research has attempted to unpack what drives public responses to water reuse, using a variety of approaches. A large amount of this work was captured by an initial review that covered research undertaken up to the early 2000s (Hartley, 2006). This paper showcases post-millennium evidence and thinking around public responses to water reuse, and highlights the novel insights and shifts in emphasis that have occurred in the field. Our analysis is structured around four broad, and highly interrelated, strands of thinking: 1) work focused on identifying the range of factors that influence public reactions to the concept of water reuse, and broadly looking for associations between different factors; 2) more specific approaches rooted in the socio-psychological modelling techniques; 3) work with a particular focus on understanding the influences of trust, risk perceptions and affective (emotional) reactions; and 4) work utilising social constructivist perspectives and socio-technical systems theory to frame responses to water reuse. Some of the most significant advancements in thinking in this field stem from the increasingly sophisticated understanding of the 'yuck factor' and the role of such pre-cognitive affective reactions. These are deeply entrenched within individuals, but are also linked with wider societal processes and social representations. Work in this area suggests that responses to reuse are situated within an overall process of technological 'legitimation'. These emerging insights should help stimulate some novel thinking around approaches to public engagement for water reuse. Copyright © 2017 Elsevier Ltd. All rights reserved.

21st Century Transformation

ERIC Educational Resources Information Center

Davidson, Nadene; Stone, Jody

2009-01-01

Education has changed, and at no time is this more evident than when working with students who are tethered to the Internet, are fully engaged in technology-based social networking, create blogs and wikis, and expect instantaneous responses as they twitter with their peers around the world. Some of the knowledge and skills that millennial students…

Cleaning up That Mess: A Framework for Classifying Educational Apps

ERIC Educational Resources Information Center

Cherner, Todd; Dix , Judy; Lee, Corey

2014-01-01

As tablet technologies continue to evolve, the emergence of educational applications (apps) is impacting the work of teacher educators. Beyond online lists of best apps for education and recommendations from colleagues, teacher educators have few resources available to support their teaching of how to select educational apps. In response, this…

The Response of Small Scale Rigid Targets to Shallow Buried Explosive Detonations

DTIC Science & Technology

2011-09-01

properties as applied in this work was based on some of the standard defini- tions of soil constitutive properties as found in, e.g., Chen and Baladi [18...Technology Corporation; 2007. [18] Chen WF, Baladi GY. Soil plasticity: theory and implementation. New York: Elsevier Science; 1985. [19] Zimmerman

Doctoral Researchers' Views on Entrepreneurship: Ranging from "a Responsibility to Improve the Future" to "a Dirty Word"

ERIC Educational Resources Information Center

Walsh, Elaine; Hargreaves, Caroline; Hillemann-Delaney, Ulrike; Li, Jizhen

2015-01-01

Policy changes prompt many universities to become more entrepreneurial and doctoral researchers, especially those working in science and technology, are expected to play important roles, contributing to the growth of knowledge economies through entrepreneurial activity. Informal evidence of differing views on entrepreneurship between Chinese and…

The Composition of the STEMM Workforce: Rationale for Differentiating STEMM Professional and STEMM Support Careers

ERIC Educational Resources Information Center

Miller, Jon D.; Solberg, V. Scott

2012-01-01

This article argues for the need to differentiate between "professional" and "support" careers in fields of science, technology, engineering, mathematics, and medicine (STEMM). Using data from the Longitudinal Study of American Youth (LSAY), the article identifies important differences in the nature of the work and responsibility that…

Emergency Medical Operations at Kennedy Space Center in Support of Space Shuttle

NASA Technical Reports Server (NTRS)

Myers, K. Jeffrey; Tipton, David A.; Woodard, Daniel; Long, Irene D.

1992-01-01

The unique environment of the Kennedy Space Center includes a wide variety of industrial processes culminating in launch and spaceflight. Many are potentially hazardous to the work force and the astronauts. Technology, planning, training, and quality control are utilized to prevent contingencies and expedite response should a contingency occur.

From Static to Dynamic: Choosing and Implementing a Web-Based CMS

ERIC Educational Resources Information Center

Kneale, Ruth

2008-01-01

Working as systems librarian for the Advanced Technology Solar Telescope (ATST), a project for the National Solar Observatory (NSO) based in Tucson, Arizona, a large part of the author's responsibilities involve running the web site. She began looking into content management systems (CMSs), specifically ones for website control. A CMS is generally…

The Relation between the Level of Job Satisfaction and Types of Personality in High School Teachers

ERIC Educational Resources Information Center

Ayan, Sezer; Kocacik, Faruk

2010-01-01

Teachers are loaded important responsibilities in educational process. The productivity and effectiveness of them are influenced by promotion, charging, job security, technological level, course load and working schedule which all are determined mostly by their institutions and influenced by noncognitive characteristics such as age, gender, family…

34 CFR 426.5 - What activities does the Secretary fund under the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2013 CFR

2013-07-01

... responses to individual and family crises, including family violence and child abuse; (e) Strengthening... limited resources; (i) Improving individual, child, and family nutrition and wellness; (j) Understanding the impact of new technology on life and work; (k) Applying consumer and homemaking education skills...

34 CFR 426.5 - What activities does the Secretary fund under the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2014 CFR

2014-07-01

... responses to individual and family crises, including family violence and child abuse; (e) Strengthening... limited resources; (i) Improving individual, child, and family nutrition and wellness; (j) Understanding the impact of new technology on life and work; (k) Applying consumer and homemaking education skills...

34 CFR 426.5 - What activities does the Secretary fund under the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2012 CFR

2012-07-01

... responses to individual and family crises, including family violence and child abuse; (e) Strengthening... limited resources; (i) Improving individual, child, and family nutrition and wellness; (j) Understanding the impact of new technology on life and work; (k) Applying consumer and homemaking education skills...

34 CFR 426.5 - What activities does the Secretary fund under the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2011 CFR

2011-07-01

... responses to individual and family crises, including family violence and child abuse; (e) Strengthening... limited resources; (i) Improving individual, child, and family nutrition and wellness; (j) Understanding the impact of new technology on life and work; (k) Applying consumer and homemaking education skills...

34 CFR 426.5 - What activities does the Secretary fund under the Program for Model Consumer and Homemaking...

Code of Federal Regulations, 2010 CFR

2010-07-01

... responses to individual and family crises, including family violence and child abuse; (e) Strengthening... limited resources; (i) Improving individual, child, and family nutrition and wellness; (j) Understanding the impact of new technology on life and work; (k) Applying consumer and homemaking education skills...

Working with Constraints in Mobile Learning: A Response to Ballance

ERIC Educational Resources Information Center

Stockwell, Glenn

2012-01-01

While the enthusiasm that Ballance shows in his commentary (this issue) for mobile learning and the possibilities that new developments in technology of mobile devices may bring about is commendable, there are several areas of concern in his commentary that deserve mention. The author's first concern is that the commentary misrepresents the…

Perceptions of Success and Impact of Interactions on Faculty Development Centers in Higher Education

ERIC Educational Resources Information Center

White, Mark

2014-01-01

In efforts to improve the quality of education, higher education institutions are increasingly turning to lead faculty developers (LFDs) of faculty development centers (FDCs) as part of the solution. Historically, LFDs have been responsible for working directly with faculty to improve teaching strategies, course design, and technology integration.…

How Personal, Behavioral, and Environmental Factors Predict Working in STEMM vs Non-STEMM Middle-Skill Careers

ERIC Educational Resources Information Center

Cannady, Matthew A.; Moore, Debra; Votruba-Drzal, Elizabeth; Greenwald, Eric; Stites, Regie; Schunn, Christian D.

2017-01-01

Background: Much of science, technology, engineering, mathematics, and medical (STEMM) education policy and research centers around developing the upper levels of the STEMM workforce sector. However, there are many positions in this workforce, "middle-skill careers," that are largely responsible for executing the innovations and are…

Blood Lifestyle: Externalizing the Cost of Human Life

ERIC Educational Resources Information Center

Model, David

2012-01-01

To build postsecondary institutions that educate responsible citizens as well as competent employees and consumers, it is important that people must teach and learn themselves about the context--domestic and global--in which work is to be done, and the purposes which economic and technological development serve. One aspect of that context is the…

Mutable Mobiles: Online Journals and the Evolving Genre Ecosystem of Science

ERIC Educational Resources Information Center

Casper, Christian Fredrick

2009-01-01

This dissertation addresses the related questions of how online communication technologies affect communication in science and, more broadly, how new ways of interaction in online spaces affect how texts enact genres. Genres have been usefully thought of as typified discursive responses to recurrent social exigences, and much recent work has shown…

Emergency medical operations at Kennedy Space Center in support of space shuttle

NASA Technical Reports Server (NTRS)

Myers, K. J.; Tipton, D. A.; Woodard, D.; Long, I. D.

1992-01-01

The unique environment of the Kennedy Space Center includes a wide variety of industrial processes culminating in launch and spaceflight. Many are potentially hazardous to the work force and the astronauts. Technology, planning, training, and quality control are utilized to prevent contingencies and expedite response should a contingency occur.

Listening to Country Voices: Preparing, Attracting and Retaining Teachers for Rural and Remote Areas.

ERIC Educational Resources Information Center

Yarrow, Allan; Herschell, Paul; Millwater, Jan

1999-01-01

Examines the need for better preparation of teachers to live and work in rural Australia. Uses responses from a rural Queensland community meeting to discuss preparation needs related to multiage classrooms, cultural differences, and school-community involvement. Describes a new internship/mentor program at Queensland University of Technology that…

The Imperative of Solving Nurses' Usability Problems With Health Information Technology.

PubMed

Staggers, Nancy; Elias, Beth L; Makar, Ellen; Alexander, Gregory L

2018-04-01

Health information technology (IT) usability issues are a key concern for nurse executives and nurses. The aims of this study are to understand usability pain points faced by nurses regarding the use of health IT, identify their impact and importance, discuss responsibilities, and develop possible solutions to improve the health IT-user experience for nurses. Twenty-seven experts were interviewed including nursing leaders, informaticists, executives, engineers, researchers, and human factors experts across acute care, long-term care, and vendor settings. Semistructured questions guided the interviews, and content analysis was used to identify themes. Four themes emerged: 1) user experience pain points, 2) importance of the issues, 3) the responsibility gap, and 4) acting on usability issues. Nurses continue to endure significant health IT-usability issues that negatively impact patients, nurses, and healthcare organizations. Solutions include enhancing the voice of nursing at the national and local levels, creating a digital strategy for nursing, providing incentives to improve usability in health IT, and accelerating the understanding of nurses' work intended to inform and translate nurses' work into health IT design.

Design and implementation of two two-week Teacher Enhancement Institutes

NASA Technical Reports Server (NTRS)

Lambert, Lynn

1994-01-01

During this summer, I have been part of a four team effort that planned and executed two two-week Teacher Enhancement Institutes (TEI) for 40 K-8 teachers from this area. The TEI was designed to enhance teachers' background in aeronautics and technology so that they would be better equipped to encourage and to train students in the mathematics, science, and technology fields. The teachers were given a stipend and three graduate credits from Christopher Newport University for their participation in this program. The four ASEE fellows worked together to develop objectives and a schedule of activities for each two-week session based on the program outline given in the grants that were funding this effort. We divided the responsibilities in coordinating and implementing each part of the TEI based on the specific strengths and background of each ASEE fellow. My specific responsibilities were: (1) to develop the course syllabus and generally handle all matters involved with the graduate course; (2) coordinate the follow-up sessions; and (3) design and manage half of the technology sessions that we had scheduled (approximately 30% of the TEI was devoted to technology). Because the first two responsibilities were primarily administrative in nature, I will address only the last. The technology sessions were divided into computer-only and other technologies (e.g., television and digital technology including scanning, digital photography and CD-ROM). I had responsibility for the computer-only technology sessions. The emphasis of these sessions was on use of the Internet specifically to locate and use educational resources. To maximize learning, these sessions were hands-on with two teachers at each computer. Each teacher received instruction in, and actually used, the most popular tools available on the Internet: email (they were given temporary accounts at NASA LaRC), anonymous ftp and archie, gopher and veronica, mosaic, and telnet. Teachers participated in hands-on workshops to learn about these programs, but were also given time during the two-week session to explore on their own and to find resources on the Net that specifically met their needs. In order to ensure that Internet access continues after their return to the classroom, aIl teachers who did not have them also applied for Learning Link accounts (from WHRO, the local public television station) and Virginia Pen accounts (from the Department of Education of Virginia), both of which allow textbased access to Internet. In addition to getting exposure to and practice with Internet tools, teachers were aIso given a hands-on seminar (and also given practice time) on ClarisWorks, an integrated word processing, spreadsheet, database, and paint package. The technology sessions (and TEI as a whole) were enthusiastically received by both new and more experienced teachers as extremely helpful in improving their ability to use technology in developing lesson pIans.

How maya women respond to changing technology : The effect of helping behavior on initiating reproduction.

PubMed

Kramer, K L; McMillan, G P

1998-06-01

In the mid 1970s labor-saving technology was introduced into a Maya subsistence agricultural community that markedly increased the efficiency with which maize could be ground and water collected. This increased efficiency introduces a possible savings in the time that women allocate to work, which can be reapportioned to child care, food production, domestic work, or leisure. An earlier study suggested that this labor-saving technology had a positive effect in decreasing the age at which these Maya women begin their reproductive careers. Although there is a statistical association between the age at which women bear their first child and the introduction of modern technology, this association does not demonstrate that the decline in age at first birth is causally related to the presence of technology. This paper pursues two objectives to evaluate this potential causal relationship in greater detail. First, a theory relating technological change to the initiation of a reproductive career is briefly developed in order to make qualitative predictions about behavioral changes as a response to changing technology. Second, these predictions are then tested against time allocation data recently collected in this same Maya community.We suggest that both of the conditions necessary to initiate reproduction-fecundity and access to mates-fundamentally depend on the amount of help that a girl provides to her family. Further, the help that a girl provides can be affected by technological changes. Analyses show that when modern technology is available, unmarried young women do not change the time allocated to domestic tasks and child care, and allocate more time to low-energy leisure activities. This lack of perceived benefit to working more and a potential concomitant shift towards a positive energy balance may in part explain why Maya women leave home and initiate reproduction at a younger age after labor-saving technology is introduced.

Requirements for Printed Wiring Boards

NASA Technical Reports Server (NTRS)

1984-01-01

In order to maintain the high standards of the NASA printed wiring programs, this publication: prescribes NASA's requirements for assuring reliable rigid printed wiring boards; describes and incorporates basic considerations necessary to assure reliable rigid printed wiring boards; establishes the supplier's responsibility to train and certify personnel; provides for supplier documentation of the fabrication and inspection procedures to be used for NASA work, including supplier innovations and changes in technology; and provides visual workmanship standards to aid those responsible for determining quality conformance to the established requirements.

A User’s Guide for the Software Technology Economic Impact Model

DTIC Science & Technology

1991-10-01

Copy 16 oft22 oples U AD-A248 023 \\\\1\\\\\\i\\~\\1\\1\\\\1\\1\\11\\\\\\l~ IDA DOCUMENT D-971 E Tt USER’S GUIDE FOR THE SOFTWARE TECHNOLOGY ECONOMIC IMPACT MODEL I... studied , and they are released by the President of IDA. Group Reports Group Reports record the findings and results of IDA established working groups and...the senior individuals responsible for the project and others as selected by IDA to ensure their high quality and relevance to the problems studied

Analysis of vibrational response in graphite oxide nanoplatelets

NASA Astrophysics Data System (ADS)

Prias Barragan, Jhon Jairo; Gross, Katherine; Lajaunie, Luc; Arenal, Raul; Ariza Calderon, Hernando; Prieto, Pedro

In this work, we present a new low-cost fabrication process to obtain graphite oxide nanoplatelets from bamboo pyroligneous acid (GO-BPA) by thermal decomposition method using a pyrolysis system for different carbonization temperatures from 673 to 973 K. The GO-BPA samples were characterized by using Raman, FTIR, XRD, SEM and TEM techniques, whose results suggest that increased carbonization temperature increases graphite conversion, boundary defects, desorption of some organic compounds and phonon response, respectively. We discuss potential applications of the GO-BPA samples involving phonon response that would benefit from a fully scaled technology, advanced electronic sensors and devices.

An overview of DARPA's advanced space technology program

NASA Astrophysics Data System (ADS)

Nicastri, E.; Dodd, J.

1993-02-01

The Defense Advanced Research Projects Agency (DARPA) is the central research and development organization of the DoD and, as such, has the primary responsibility for the maintenance of U.S. technological superiority over potential adversaries. DARPA's programs focus on technology development and proof-of-concept demonstrations of both evolutionary and revolutionary approaches for improved strategic, conventional, rapid deployment and sea power forces, and on the scientific investigation into advanced basic technologies of the future. DARPA can move quickly to exploit new ideas and concepts by working directly with industry and universities. For four years, DARPA's Advanced Space Technology Program (ASTP) has addressed various ways to improve the performance of small satellites and launch vehicles. The advanced technologies that are being and will be developed by DARPA for small satellites can be used just as easily on large satellites. The primary objective of the ASTP is to enhance support to operational commanders by developing and applying advanced technologies that will provide cost-effective, timely, flexible, and responsive space systems. Fundamental to the ASTP effort is finding new ways to do business with the goal of quickly inserting new technologies into DoD space systems while reducing cost. In our view, these methods are prime examples of what may be termed 'technology leveraging.' The ASTP has initiated over 50 technology projects, many of which were completed and transitioned to users. The objectives are to quickly qualify these higher risk technologies for use on future programs and reduce the risk of inserting these technologies into major systems, and to provide the miniaturized systems that would enable smaller satellites to have significant - rather than limited - capability. Only a few of the advanced technologies are described, the majority of which are applicable to both large and small satellites.

Effects of working memory load and repeated scenario exposure on emergency braking performance.

PubMed

Engström, Johan; Aust, Mikael Ljung; Viström, Matias

2010-10-01

The objective of the present study was to examine the effect of working memory load on drivers' responses to a suddenly braking lead vehicle and whether this effect (if any) is moderated by repeated scenario exposure. Several experimental studies have found delayed braking responses to lead vehicle braking events during concurrent performance of nonvisual, working memory-loading tasks, such as hands-free phone conversation. However, the common use of repeated, and hence somewhat expected, braking events may undermine the generalizability of these results to naturalistic, unexpected, emergency braking scenarios. A critical lead vehicle braking scenario was implemented in a fixed-based simulator.The effects of working memory load and repeated scenario exposure on braking performance were examined. Brake response time was decomposed into accelerator pedal release time and accelerator-to-brake pedal movement time. Accelerator pedal release times were strongly reduced with repeated scenario exposure and were delayed by working memory load with a small but significant amount (178 ms).The two factors did not interact. There were no effects on accelerator-to-brake pedal movement time. The results suggest that effects of working memory load on response performance obtained from repeated critical lead vehicle braking scenarios may be validly generalized to real world unexpected events. The results have important implications for the interpretation of braking performance in experimental settings, in particular in the context of safety-related evaluation of in-vehicle information and communication technologies.

Investigating the ways in which health information technology can promote antimicrobial stewardship: a conceptual overview.

PubMed

King, Abby; Cresswell, Kathrin M; Coleman, Jamie J; Pontefract, Sarah K; Slee, Ann; Williams, Robin; Sheikh, Aziz

2017-08-01

Antimicrobial resistance is now recognised as a threat to health worldwide. Antimicrobial stewardship aims to promote the responsible use of antibiotics and is high on international and national policy agendas. Health information technology has the potential to support antimicrobial stewardship in a number of ways, but this field is still poorly characterised and understood. Building on a recent systematic review and expert roundtable discussions, we take a lifecycle perspective of antibiotic use in hospitals and identify potential targets for health information technology-based interventions to support antimicrobial stewardship. We aim for this work to help chart a future research agenda in this critically important area.

[The study of functional status in the perception of visual information depending on the method of technical color mixing on LCD and DLP projectors technology].

PubMed

Merkulova, A G; Osokina, E S; Bukhtiiarov, I V

2014-10-01

The case of compare two ways of projection color visual images, characterized by different spatial-temporal characteristics of visual stimuli, presents the methodology and the set of techniques. Received comparative data, identifying risks of regulation disorder of the functional state and development general, mental and visual fatigue during prolonged strenuous visual activity, according to two types of test tasks, which are the most typical for the use of modern projectors to work with the audience, both inthe process of implementation of learning technologies and the collective take responsible decisions by expert groups that control of complex technological processes.

2015 DOE Vehicle Technologies Office Annual Merit Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2015 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 8-12, 2015, in Arlington, Virginia. The review encompassed all of the work done by the FCTO and the VTO: 258 individual activities were reviewed for VTO, by 170 reviewers. A total of 1,095 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia tomore » give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.« less

Report from the Gravitational Observatory Advisory Team

NASA Astrophysics Data System (ADS)

Mueller, Guido; Gravitational Observatory Advisory Team

2016-03-01

As a response to the selection of the Gravitational Universe as the science theme for ESA's L3 mission, ESA formed the Gravitational-Wave Observatory Advisory Team (GOAT) to advise ESA on the scientific and technological approach for a gravitational wave observatory. NASA is participating with three US scientists and one NASA observer; JAXA was also invited and participates with one observer. The GOAT looked at a range of mission technologies and designs, discussed their technical readiness with respect to the ESA schedule, recommended technology development activities for selected technologies, and worked with the wider gravitational-wave community to analyze the impact on the science of the various mission designs. The final report is expected to be submitted to ESA early March and I plan to summarize its content.

Information technology leadership in academic medical centers: a tale of four cultures.

PubMed

Friedman, C P

1999-07-01

Persons and groups within academic medical centers bring consistent and predictable viewpoints to planning and decision making. The varied professional and academic cultures of these individuals appear to account primarily for the diversity of their viewpoints. Understanding these professional cultures can help leaders achieve some predictability in the complex environments for which they are responsible. Leaders in information technology in particular, in order to be successful, must become part-time anthropologists, immersing themselves in the varied workplaces of their constituents to understand the work they do and the cultures that have grown up around this work. Only in this way will they be able to manage the challenges that arise continuously as the technology and the needs it can address change over time. In this article, the author briefly describes the concept of culture, portrays four specific professional cultures that typically coexist in academic medical centers, and argues that understanding these cultures is absolutely critical to effective management and use of information resources.

Integration of devices into long-term condition management: a synthesis of qualitative studies.

PubMed

Gately, Claire; Rogers, Anne; Kirk, Susan; McNally, Rosalind

2008-06-01

Understanding peoples' responses to and ability to incorporate technology for managing long-term conditions into their everyday lives is relevant for informing the development and implementation of new technologies as part of future long-term condition management in domestic environments. Future research and theory building can be facilitated by the synthesis of existing qualitative studies. A systematic search for qualitative studies of health technologies at home was undertaken on OVID CINAHL, OVID Medline and CSA databases for the period 1996-2006. Studies (n = 12) that met the inclusion criteria were synthesized and their analyses subjected to qualitative meta-synthesis. Analyses clustered into five themes: (1) managing multiple uncertainties; (2) the reconstruction of identity; (3) the struggle to remain autonomous while allowing dependence; (4) coming to terms with living a technology-assisted life; and (5) the usability of devices. These translated into a line of argument synthesis in which technology takes on the status of a personified ;other' around which a set of personal and relational attributions are subsequently constructed. These allow the extension of existing illness work to incorporate new technologies. Ambivalence about the value of technologies that are designed to assist with the management of a long-term condition reflects experiences of the disruptive effects of health technologies on personal identities and strategies of managing illness. At the same time, they are highly valued because they provided new opportunities to complete aspects of illness work that were previously impossible.

High frequency characteristic of a monolithic 500 °C OpAmp-RC integrator in SiC bipolar IC technology

NASA Astrophysics Data System (ADS)

Tian, Ye; Zetterling, Carl-Mikael

2017-09-01

This paper presents a comprehensive investigation of the frequency response of a monolithic OpAmp-RC integrator implemented in a 4H-SiC bipolar IC technology. The circuits and devices have been measured and characterized from 27 to 500 °C. The devices have been modelled to identify that the substrate capacitance is a dominant factor affecting the OpAmp's high-frequency response. Large Miller compensation capacitors of more than 540 pF are required to ensure stability of the internal OpAmp. The measured unit-gain-bandwidth product of the OpAmp is ∼1.1 MHz at 27 °C, and decreases to ∼0.5 MHz at 500 °C mainly due to the reduction of the transistor's current gain. On the other hand, it is not necessary to compensate the integrator in a relatively wide bandwidth ∼0.7 MHz over the investigated temperature range. At higher frequencies, the integrator's frequency response has been identified to be significantly affected by that of the OpAmp and load impedance. This work demonstrates the potential of this technology for high temperature applications requiring bandwidths of several megahertz.

Hydrogen Energy Storage and Power-to-Gas: Establishing Criteria for Successful Business Cases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eichman, Joshua; Melaina, Marc

As the electric sector evolves and increasing amounts of variable generation are installed on the system, there are greater needs for system flexibility, sufficient capacity and greater concern for overgeneration. As a result there is growing interest in exploring the role of energy storage and demand response technologies to support grid needs. Hydrogen is a versatile feedstock that can be used in a variety of applications including chemical and industrial processes, as well as a transportation fuel and heating fuel. Traditionally, hydrogen technologies focus on providing services to a single sector; however, participating in multiple sectors has the potential tomore » provide benefits to each sector and increase the revenue for hydrogen technologies. The goal of this work is to explore promising system configurations for hydrogen systems and the conditions that will make for successful business cases in a renewable, low-carbon future. Current electricity market data, electric and gas infrastructure data and credit and incentive information are used to perform a techno-economic analysis to identify promising criteria and locations for successful hydrogen energy storage and power-to-gas projects. Infrastructure data will be assessed using geographic information system applications. An operation optimization model is used to co-optimizes participation in energy and ancillary service markets as well as the sale of hydrogen. From previous work we recognize the great opportunity that energy storage and power-to-gas but there is a lack of information about the economic favorability of such systems. This work explores criteria for selecting locations and compares the system cost and potential revenue to establish competitiveness for a variety of equipment configurations. Hydrogen technologies offer unique system flexibility that can enable interactions between multiple energy sectors including electric, transport, heating fuel and industrial. Previous research established that hydrogen technologies, and in particular electrolyzers, can respond fast enough and for sufficient duration to participate in electricity markets. This work recognizes that participation in electricity markets and integration with the gas system can enhance the revenue streams available for hydrogen storage systems and quantifies the economic competitiveness and of these systems. A few of the key results include 1) the most valuable revenue stream for hydrogen systems is to sell the produced hydrogen, 2) participation in both energy and ancillary service markets yields the greatest revenue and 3) electrolyzers acting as demand response devices are particularly favorable.« less

Development and pilot trial of a web-based job placement information network.

PubMed

Chan, Eliza W C; Tam, S F

2005-01-01

The purpose of this project was to develop and pilot a web-based job placement information network aiming at enhancing the work trial and job placement opportunities of people with disabilities (PWD). Efficient uses of information technology in vocational rehabilitation were suggested to help improve PWD employment opportunities and thus enable them to contribute as responsible citizens to the society. In this preliminary study, a web-based employer network was so developed to explore Hong Kong employers' needs and intentions in employing PWD. The results indicated that Hong Kong employers generally agreed to arrange work trials for PWD whose work abilities match job requirements. They also expressed that they would offer permanent job placements to those PWD who showed satisfactory performance in work trials. The present study evidenced that using an information network could expedite communications between employers and job placement services, and thus job placement service outcomes. It is hoped that a job placement databank could thus be developed through accumulating responses from potential employers.

Case management's value is finally recognized. What happens now? .

PubMed

2015-10-01

In recent years, case management has been recognized as a key in improving healthcare quality and reducing costs, but while hospitals are giving case managers more responsibilities, many administrators are not approving an increase in staff to handle the extra work. Case managers can help their hospital succeed with the Centers for Medicare & Medicaid Services' Value-based Purchasing program, the readmission reduction program, and bundled payments. Case management directors should make sure the hospital's senior leadership understands the roles and responsibilities of case managers and how their interventions can affect outcomes and the bottom line. The number of caseloads depends on the case management model, the responsibilities of case managers, and whether they have assistants or case management extenders who can take over some tasks and allow the licensed staff to work at the top of their licenses. Don't let technology replace communication and patient-centered interactions.

Aerospace technology and commercial nuclear power; Proceedings of the Workshop Conference, Williamsburg, VA, November 18-20, 1981

NASA Technical Reports Server (NTRS)

Grey, J. (Editor)

1982-01-01

An attempt has been made to compare the technologies, institutions and procedures of the aerospace and commercial nuclear power industries, in order to characterize similarities and contrasts as well as to identify the most fruitful means by which to transfer information, technology, and procedures between the two industries. The seven working groups involved in this study took as their topics powerplant design formulation and effectiveness, plant safety and operations, powerplant control technology and integration, economic and financial analyses, public relations, and the management of nuclear waste and spent fuel. Consequential differences are noted between the two industries in matters of certification and licencing procedures, assignment of responsibility for both safety and financial performance, and public viewpoint. Areas for beneficial interaction include systems management and control and safety system technology. No individual items are abstracted in this volume

Micro/nano-fabrication technologies for cell biology.

PubMed

Qian, Tongcheng; Wang, Yingxiao

2010-10-01

Micro/nano-fabrication techniques, such as soft lithography and electrospinning, have been well-developed and widely applied in many research fields in the past decade. Due to the low costs and simple procedures, these techniques have become important and popular for biological studies. In this review, we focus on the studies integrating micro/nano-fabrication work to elucidate the molecular mechanism of signaling transduction in cell biology. We first describe different micro/nano-fabrication technologies, including techniques generating three-dimensional scaffolds for tissue engineering. We then introduce the application of these technologies in manipulating the physical or chemical micro/nano-environment to regulate the cellular behavior and response, such as cell life and death, differentiation, proliferation, and cell migration. Recent advancement in integrating the micro/nano-technologies and live cell imaging are also discussed. Finally, potential schemes in cell biology involving micro/nano-fabrication technologies are proposed to provide perspectives on the future research activities.

Micro/nano-fabrication technologies for cell biology

PubMed Central

Qian, Tongcheng

2012-01-01

Micro/nano-fabrication techniques, such as soft lithography and electrospinning, have been well-developed and widely applied in many research fields in the past decade. Due to the low costs and simple procedures, these techniques have become important and popular for biological studies. In this review, we focus on the studies integrating micro/nano-fabrication work to elucidate the molecular mechanism of signaling transduction in cell biology. We first describe different micro/nano-fabrication technologies, including techniques generating three-dimensional scaffolds for tissue engineering. We then introduce the application of these technologies in manipulating the physical or chemical micro/nano-environment to regulate the cellular behavior and response, such as cell life and death, differentiation, proliferation, and cell migration. Recent advancement in integrating the micro/nano-technologies and live cell imaging are also discussed. Finally, potential schemes in cell biology involving micro/nano-fabrication technologies are proposed to provide perspectives on the future research activities. PMID:20490938

Statewide Study of School Public Relations Personnel: Roles, Responsibilities, Relationships, and Budget Vote Outcomes

ERIC Educational Resources Information Center

Knight, Catherine

2013-01-01

This two-part quantitative study expanded our understanding of school PR personnel in public school districts, particularly those who worked during the 2009-2012 budget years. Four cultural changes have redefined the paradigm of public education and served as a springboard for this study: technology-enhanced communications information retrieval,…

Organisational Learning about Depression in the Workplace: A Community of Practice of Silence and Avoidance

ERIC Educational Resources Information Center

Davies, Lisa

2006-01-01

The economic and social impact of depression on the Australian workforce is only recently being acknowledged. In 2004, the author undertook semi-structured interviews with people with human resource responsibilities in the deregulated sector of information technology in South Australia. The interviews focused on their accessibility to work-based…

Electrical Connections: Letters to Thomas Edison in Response to His Claim of Solving Incandescent Lighting, 1878.

ERIC Educational Resources Information Center

Bazerman, Charles

1994-01-01

Discusses the way in which letters sent to Thomas Edison following the report that he had solved the problem of incandescent lighting reveal the many discursive worlds that Edison's work touched. Claims these letters indicate how a technological accomplishment is also a multiple, complex social, and communicative accomplishment, creating place and…

Inter-Cultural Differences in Response to a Computer-Based Anti-Bullying Intervention

ERIC Educational Resources Information Center

Watson, Scott E. J.; Vannini, Natalie; Woods, Sarah; Dautenhahn, Kerstin; Sapouna, Maria; Enz, Sibylle; Schneider, Wolfgang; Wolke, Dieter; Hall, Lynne; Paiva, Ana; Andre, Elizabeth; Aylett, Ruth

2010-01-01

Background and purpose: Many holistic anti-bullying interventions have been attempted, with mixed success, while little work has been done to promote a "self-help" approach to victimisation. The rise of the ICT curriculum and computer support in schools now allows for approaches that benefit from technology to be implemented. This study…

Research on Webbed Connectivity in a Web-Based Learning Environment: Online Social Work Education

ERIC Educational Resources Information Center

Noble, Dorinda; Russell, Amy Catherine

2013-01-01

This paper describes the preliminary data and analysis of how students in an online MSW program perceive their experiences, interactions, and responses to learning structure, material, and technology in the Web environment. The student perceptions, which have been used to refine the online program, highlight how important it is to students to feel…

Rights and Responsibilities in the Digital Age: Problems with Stronger Copyright in an Information Society.

ERIC Educational Resources Information Center

Eisenschitz, Tamara; Turner, Paul

1997-01-01

Discusses three issues: (1) copyright and the effects of technological change and the trend to commodify information; (2) the interests involved; and (3) the "Green Paper," a proposal by the European Commission to address copyright issues arising from digitization of protected works. Safeguarding free information access can be achieved…

Characterizing the Use of Mathematical Knowledge in Boundary-Crossing Situations at Work

ERIC Educational Resources Information Center

Kent, Phillip; Noss, Richard; Guile, David; Hoyles, Celia; Bakker, Arthur

2007-01-01

The first aim of this article is to present a characterization of the techno-mathematical literacies needed for effective practice in modern, technology-rich workplaces that are both highly automated and increasingly focused on flexible response to customer needs. The second aim is to introduce an epistemological dimension to activity theory,…

A Desire for the Personal: Student Perceptions of Electronic Feedback

ERIC Educational Resources Information Center

Budge, Kylie

2011-01-01

An earlier study conducted into tertiary student perceptions of feedback on their work revealed a mixed response to the idea of electronic feedback. This result was surprising considering the attention given to Generation Y and the preference for digital technology in their lives. This paper reports on the results of a follow-up study exploring a…

Rules for Adaptive Learning and Assistance on the Shop Floor

ERIC Educational Resources Information Center

Ullrich, Carsten

2016-01-01

Today's shop floor, the area of a factory where operatives assemble products, is a complex and demanding work environment. The employed and produced technology becomes ever more complex, and employees are responsible for an increasing amount of tasks. As a consequence, the employee is under constant pressure to solve problems occurring on the shop…

From the Classroom to the Boardroom: Schools Adopt Digital and Sustainable Practices across All Levels

ERIC Educational Resources Information Center

Daniels, Marc

2011-01-01

Significant responsibility for the transition from paper to online can be traced to the college admissions office. By instituting online applications, admissions offices fundamentally altered the way in which college admissions works. Always on the forefront of developing and implementing new technology for the benefit of faculty and students,…

Contemporary Issues in Group Learning in Undergraduate Science Classrooms: A Perspective from Student Engagement

ERIC Educational Resources Information Center

Hodges, Linda C.

2018-01-01

As the use of collaborative-learning methods such as group work in science, technology, engineering, and mathematics classes has grown, so has the research into factors impacting effectiveness, the kinds of learning engendered, and demographic differences in student response. Generalizing across the range of this research is complicated by the…

(Re)Considering Foucault for Science Education Research: Considerations of Truth, Power and Governance

ERIC Educational Resources Information Center

Bazzul, Jesse; Carter, Lyn

2017-01-01

This article is a response to Anna Danielsonn, Maria Berge, and Malena Lidar's paper, "Knowledge and power in the technology classroom: a framework for studying teachers and students in action," and an appeal to science educators of all epistemological orientations to (re)consider the work of Michel Foucault for research in science…

Community Health Education in Developing Countries. Appropriate Technologies for Development. Manual M-8.

ERIC Educational Resources Information Center

American Public Health Association, Washington, DC.

This manual was developed for those interested in promoting change to improve health conditions of their communities. Parts I and II focus on fundamental health education processes and discuss techniques and approaches for working with community members to plan and develop programs that are responsive to the community's expressed needs and goals.…

"You Need to Have a Street Beat": A Qualitative Study of Faculty Research Needs and Challenges

ERIC Educational Resources Information Center

Monroe-Gulick, Amalia; Valentine, Greta; Brooks-Kieffer, Jamene

2017-01-01

In the spring of 2015, 14 faculty members in social science or in science, technology, engineering, and mathematics (STEM) spoke with a working group from the University of Kansas (KU) Libraries regarding their research needs and challenges. Their responses highlighted a dynamic research environment in which individual researchers desire to…

Brain Research, Learning and Emotions: Implications for Education Research, Policy and Practice

ERIC Educational Resources Information Center

Hinton, Christina; Miyamoto, Koji; Della-Chiesa, Bruno

2008-01-01

Recent advancements in neuroscience heighten its relevance to education. Newly developed imaging technologies enable scientists to peer into the working brain for the first time, providing powerful insights into how we learn. Research reveals that the brain is not a stable and isolated entity, but a dynamic system that is keenly responsive to…

Building an Ajax Application from Scratch

ERIC Educational Resources Information Center

Clark, Jason A.

2006-01-01

The author of this article suggests that to refresh Web pages and online library catalogs in a more pleasing way, Ajax, an acronym for Asynchronous JavaScript and XML, should be used. Ajax is the way to use Web technologies that work together to refresh sections of Web pages to allow almost instant responses to user input. This article describes…

Developing Talent in Mathematics, Science and Technology: A Conference on Academic Talent (Durham, North Carolina, March 28-30, 1988).

ERIC Educational Resources Information Center

Dreyden, Julia I., Ed.; And Others

An introductory chapter, "Contemporary Issues in Gifted Education" by Julia Dreyden and Shelagh Gallagher, summarizes National Science Foundation policy concerning development of new science and mathematics curricula and the work of the Talent Identification Program. Major conference papers and responses are then presented: "Developing Academic…

A Vocational Calling: Exploring a Caring Technology in Elderly Care

ERIC Educational Resources Information Center

Fejes, Andreas; Nicoll, Katherine

2010-01-01

In this article we explore the relationship of care of a group of health care workers in elderly care, through their descriptions of themselves and their work. We have an interest in how relationships of care may be explored and characterised in and across disparate vocational settings. This is a critical response to policy discourses of…

Maintaining Professional Competence. Approaches to Career Enhancement, Vitality, and Success throughout a Work Life.

ERIC Educational Resources Information Center

Willis, Sherry L., Ed.; Dubin, Samuel S., Ed.

In response to the issues of global competition, the aging workforce, and the rapid rate of technological innovation and how today's professionals must meet these challenges, an examination is made of the key developmental approaches to maintaining and enhancing the knowledge and skills of midcareer and senior-level professionals. Twenty-one…

Functional Nanomaterials for Environmental Applications and Bioassemblies

NASA Astrophysics Data System (ADS)

Nguyen, Michelle Anne

The rational design of nanomaterials has yielded new technologies that have revolutionized numerous diverse fields. The work detailed herein first describes the application of photocatalytic nanomaterials towards the environmental remediation of harmful toxins. Specifically, a low-temperature solution-phase synthetic route for size-controlled Cu2O octahedra particles was developed, and these materials were evaluated as catalysts for the photocatalytic degradation of aromatic organic compounds. Moreover, cubic Cu2O/Pd composite structures were fabricated and demonstrated to be effective photocatalysts for the generation of H2 and the reductive dehalogenation of polychlorinated biphenyls, well-known carcinogens present at many contaminated sites around the world. This photocatalytic approach to environmental remediation exemplifies the adaptation of light-driven technologies and sustainable practices to energy-intensive catalytic systems. In addition, this work also investigates the organic/inorganic interface of peptide-mediated Au nanoparticles as a means to identify rational design principles for materials binding peptide sequences for the advancement of stimuli-responsive bionanoassemblies. Factors inherent to peptide sequences that can promote strong materials-binding affinity and/or effective nanoparticle stabilization capability were identified in order to progress biomimetic technologies. These findings were elucidated using a combinational approach of peptide binding experiments to Au in partnership with molecular dynamics simulations. Overall, this work demonstrates the growing applications of nanomaterials in remediation technologies and aids in the understanding of the origins of peptide material affinity and nanoparticle stabilization.

Integrated Building Energy Systems Design Considering Storage Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stadler, Michael; Marnay, Chris; Siddiqui, Afzal

The addition of storage technologies such as flow batteries, conventional batteries, and heat storage can improve the economic, as well as environmental attraction of micro-generation systems (e.g., PV or fuel cells with or without CHP) and contribute to enhanced demand response. The interactions among PV, solar thermal, and storage systems can be complex, depending on the tariff structure, load profile, etc. In order to examine the impact of storage technologies on demand response and CO2 emissions, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program that can pursue two strategies as its objective function.more » These two strategies are minimization of its annual energy costs or of its CO2 emissions. The problem is solved for a given test year at representative customer sites, e.g., nursing homes, to obtain not only the optimal investment portfolio, but also the optimal hourly operating schedules for the selected technologies. This paper focuses on analysis of storage technologies in micro-generation optimization on a building level, with example applications in New York State and California. It shows results from a two-year research projectperformed for the U.S. Department of Energy and ongoing work. Contrary to established expectations, our results indicate that PV and electric storage adoption compete rather than supplement each other considering the tariff structure and costs of electricity supply. The work shows that high electricity tariffs during on-peak hours are a significant driver for the adoption of electric storage technologies. To satisfy the site's objective of minimizing energy costs, the batteries have to be charged by grid power during off-peak hours instead of PV during on-peak hours. In contrast, we also show a CO2 minimization strategy where the common assumption that batteries can be charged by PV can be fulfilled at extraordinarily high energy costs for the site.« less

Scientist, Single Cell Analysis Facility | Center for Cancer Research

Cancer.gov

The Cancer Research Technology Program (CRTP) develops and implements emerging technology, cancer biology expertise and research capabilities to accomplish NCI research objectives.  The CRTP is an outward-facing, multi-disciplinary hub purposed to enable the external cancer research community and provides dedicated support to NCI’s intramural Center for Cancer Research (CCR).  The dedicated units provide electron microscopy, protein characterization, protein expression, optical microscopy and nextGen sequencing. These research efforts are an integral part of CCR at the Frederick National Laboratory for Cancer Research (FNLCR).  CRTP scientists also work collaboratively with intramural NCI investigators to provide research technologies and expertise. KEY ROLES AND RESPONSIBILITIES We are seeking a highly motivated Scientist II to join the newly established Single Cell Analysis Facility (SCAF) of the Center for Cancer Research (CCR) at NCI. The SCAF will house state of the art single cell sequencing technologies including 10xGenomics Chromium, BD Genomics Rhapsody, DEPPArray, and other emerging single cell technologies. The Scientist: Will interact with close to 200 laboratories within the CCR to design and carry out single cell experiments for cancer research Will work on single cell isolation/preparation from various tissues and cells and related NexGen sequencing library preparation Is expected to author publications in peer reviewed scientific journals

Rapid response systems.

PubMed

Lyons, Patrick G; Edelson, Dana P; Churpek, Matthew M

2018-07-01

Rapid response systems are commonly employed by hospitals to identify and respond to deteriorating patients outside of the intensive care unit. Controversy exists about the benefits of rapid response systems. We aimed to review the current state of the rapid response literature, including evolving aspects of afferent (risk detection) and efferent (intervention) arms, outcome measurement, process improvement, and implementation. Articles written in English and published in PubMed. Rapid response systems are heterogeneous, with important differences among afferent and efferent arms. Clinically meaningful outcomes may include unexpected mortality, in-hospital cardiac arrest, length of stay, cost, and processes of care at end of life. Both positive and negative interventional studies have been published, although the two largest randomized trials involving rapid response systems - the Medical Early Response and Intervention Trial (MERIT) and the Effect of a Pediatric Early Warning System on All-Cause Mortality in Hospitalized Pediatric Patients (EPOCH) trial - did not find a mortality benefit with these systems, albeit with important limitations. Advances in monitoring technologies, risk assessment strategies, and behavioral ergonomics may offer opportunities for improvement. Rapid responses may improve some meaningful outcomes, although these findings remain controversial. These systems may also improve care for patients at the end of life. Rapid response systems are expected to continue evolving with novel developments in monitoring technologies, risk prediction informatics, and work in human factors. Copyright © 2018 Elsevier B.V. All rights reserved.

Technology Assessment for the Future Aeronautical Communications System

NASA Technical Reports Server (NTRS)

Budinger, James M. (Technical Monitor)

2005-01-01

To address emerging saturation in the VHF aeronautical bands allocated internationally for air traffic management communications, the International Civil Aviation Organization (ICAO) has requested development of a common global solution through its Aeronautical Communications Panel (ACP). In response, the Federal Aviation Administration (FAA) and Eurocontrol initiated a joint study, with the support of NASA and U.S. and European contractors, to provide major findings on alternatives and recommendations to the ICAO ACP Working Group C (WG-C). Under an FAA/Eurocontrol cooperative research and development agreement, ACP WG-C Action Plan 17 (AP-17), commonly referred to as the Future Communications Study (FCS), NASA Glenn Research Center is responsible for the investigation of potential communications technologies that support the long-term mobile communication operational concepts of the FCS. This report documents the results of the first phase of the technology assessment and recommendations referred to in the Technology Pre-Screening Task 3.1 of AP-17. The prescreening identifies potential technologies that are under development in the industry and provides an initial assessment against a harmonized set of evaluation criteria that address high level capabilities, projected maturity for the time frame for usage in aviation, and potential applicability to aviation. A wide variety of candidate technologies were evaluated from several communications service categories including: cellular telephony; IEEE-802.xx standards; public safety radio; satellite and over-the-horizon communications; custom narrowband VHF; custom wideband; and military communications.

Workplace response to virtual caregiver support and remote home monitoring of elders: The WIN project.

PubMed

Mahoney, Diane F; Tarlow, Barbara

2006-01-01

Research has demonstrated the health and financial cost to working caregivers of older adults and the cost to business in lost productivity. This paper describes the implementation of the Worker Interactive Networking (WIN) project, a Web-based program designed to support employed caregivers at work. WIN innovatively linked working caregivers via the Internet to home to monitor elders' status using wireless sensor technology and included an online information and support group for a six-month period. Twenty-seven employees from thirteen business sites participated. Despite problems with wireless carrier service, feasibility outcomes were achieved. We were able to collect six months of continuous real time data wirelessly from multiple types of homes across 4 states. This model demonstrates that businesses can offer a similar program and not be overwhelmed by employee demand or abuse of technology access. Reluctance to consider home monitoring was apparent and was influenced by familial relationships and values of privacy and independence.

Sustainable Ergonomic Program - Basic Condition for Implementation of Corporate Social Responsibility

NASA Astrophysics Data System (ADS)

Marková, Petra; Beňo, Rastislav; Hatiar, Karol

2012-12-01

Gradually increasing pressure on companies to start to behave socially responsible is a response to social, environmental and economic requirements. The society faces a period of changes that have occurred since the beginning of the crisis and revealing weaknesses in the economy. We become witnesses of rapid changes and challenges posed by globalization, lack of resources, demographic structure and innovation. Objective necessity becomes a corporate social responsibility (CSR) already at the companies’ level, which is supported by the approach of the EU institutions and the Slovak Republic. One of the possible appliance through which we can contribute to the sustainability of CSR are sustainable ergonomic programs. When we want to talk about sustainable ergonomic program is important to focus on three key areas. The first area is the Impact of technic and technology to employees at work, the second area is the Importance and impact of socially responsible HR in ergonomics and last area is the Creation of the work environment in relation to environmental sustainability. Ergonomic programs sustainability requires to apply appropriate methods for evaluation of their cost benefit and health effect.

Internal evaluation of the European network for health technology assessment project.

PubMed

Håheim, Lise Lund; Imaz, Iñaki; Loud, Marlène Läubli; Gasparetto, Teresa; González-Enriquez, Jesús; Dahlgren, Helena; Trofimovs, Igor; Berti, Elena; Mørland, Berit

2009-12-01

The internal evaluation studied the development of the European network for Health Technology Assessment (EUnetHTA) Project in achieving the general objective of establishing an effective and a sustainable network of health technology assessment (HTA) in Europe. The Work Package 3 group was dedicated to this task and performed the work. Information on activities during the project was collected from three sources. First, three yearly cross-sectional studies surveyed the participants' opinions. Responses were by individuals or by institutions. The last round included surveys to the Steering Committee, the Stakeholder Forum, and the Secretariat. Second, the Work Package Lead Partners were interviewed bi-annually, five times in total, to update the information on the Project's progress. Third, additional information was sought in available documents. The organizational structure remained stable. The Project succeeded in developing tools aimed at providing common methodology with intent to establish a standard of conducting and reporting HTA and to facilitate greater collaboration among agencies. The participants/agencies expressed their belief in a network and in maintaining local/national autonomy. The Work Package Leaders expressed a strong belief in the solid base of the Project for a future network on which to build, but were aware of the need for funding and governmental support. Participants and Work Package Leaders have expressed support for a future network that will improve national and international collaboration in HTA based on the experience from the EUnetHTA project.

Ascertaining the Place of Social Media and Technology for Bariatric Patient Support: What Do Allied Health Practitioners Think?

PubMed

Graham, Yitka N H; Hayes, Catherine; Mahawar, Kamal K; Small, Peter K; Attala, Anita; Seymour, Keith; Woodcock, Sean; Ling, Jonathan

2017-07-01

There is an increasing presence of patient-led social media, mobile apps and patient support technology, but little is known about the role of these in the support of bariatric surgery patients in the UK. This study aimed to seek the views of allied health professionals (AHPs) working in bariatric surgical teams to understand their current perceptions of the role of social media, mobile apps and patient-support technology within bariatric surgery in the UK. A confidential, printed survey was distributed to the AHPs at the British Obesity and Metabolic Surgery Society (BOMSS) 7th Annual Scientific Conference in January 2016. An email to AHPs who did not attend the conference was sent requesting voluntary participation in the same survey online through Survey Monkey® within 2 weeks of the conference. A total of 95 responses were received, which was a 71% response rate (n = 134). Responses were from nurses (34%, n = 46), dietitians (32%, n = 32), psychologists (16%, n = 12) and 1 nutritionist, 1 physiotherapist, 1 patient advocate, 1 surgeon and 9 respondents did not fill in their title. The use of social media and mobile apps by patients is increasing, with AHPs concerned about misinformation; advice may differ from what is given in clinic. Technologies, e.g. telehealth and videoconferencing are not widely used in bariatric surgery in the UK. AHPs are unclear about the role of technologies for bariatric surgical patient support. Further discussions are needed to understand the potential of technology with AHPs supporting/facilitating patients as this becomes more commonplace.

Health hackathons: theatre or substance? A survey assessment of outcomes from healthcare-focused hackathons in three countries.

PubMed

Olson, Kristian R; Walsh, Madeline; Garg, Priya; Steel, Alexis; Mehta, Sahil; Data, Santorino; Petersen, Rebecca; Guarino, Anthony J; Bailey, Elizabeth; Bangsberg, David R

2017-02-01

Healthcare-focused hackathons are 48-hour platforms intended to accelerate novel medical technology. However, debate exists about how much they contribute to medical technology innovation. The Consortium for Affordable Medical Technologies (CAMTech) has developed a three-pronged model to maximise their effectiveness. To gauge the success of this model, we examined follow-up outcomes. Outcomes of 12 hackathons from 2012 to 2015 in India, Uganda and the USA were measured using emailed surveys. To minimise response bias, non-responding teams were coded as having made no progress. 331 individuals provided information on 196 of 356 projects (55.1% response rate), with no difference in responses from teams participating in different countries (Cramer's V=0.09, p=0.17). 30.3% of projects had made progress after a mean of 12.2 months. 88 (24.7%) teams had initiated pilot testing, with 42 (11.8%) piloting with care providers and 24 (6.7%) with patients. Overall, 97 teams (8.1 per hackathon) drafted business plans, 22 (1.8 per hackathon) had filed patents on their innovations and 15 (1.3 per hackathon) had formed new companies. Teams raised US$64.08 million in funding (average US$5.34 million per hackathon; median award size of $1800). In addition, 108 teams (30.3%) reported at least one member working on additional technologies with people they met at a hackathon. Individual confidence to address medical technology challenges was significantly increased after attending (t(1282)=192.77, p 0.001). CAMTech healthcare hackathons lead to consistent output with respect to medical technology innovation, including clinical trials, business plan development, securing investment capital/funding and new company formation.

Health hackathons: theatre or substance? A survey assessment of outcomes from healthcare-focused hackathons in three countries

PubMed Central

Walsh, Madeline; Garg, Priya; Steel, Alexis; Mehta, Sahil; Data, Santorino; Petersen, Rebecca; Guarino, Anthony J; Bailey, Elizabeth; Bangsberg, David R

2017-01-01

Background Healthcare-focused hackathons are 48-hour platforms intended to accelerate novel medical technology. However, debate exists about how much they contribute to medical technology innovation. The Consortium for Affordable Medical Technologies (CAMTech) has developed a three-pronged model to maximise their effectiveness. To gauge the success of this model, we examined follow-up outcomes. Methods Outcomes of 12 hackathons from 2012 to 2015 in India, Uganda and the USA were measured using emailed surveys. To minimise response bias, non-responding teams were coded as having made no progress. Results 331 individuals provided information on 196 of 356 projects (55.1% response rate), with no difference in responses from teams participating in different countries (Cramer's V=0.09, p=0.17). 30.3% of projects had made progress after a mean of 12.2 months. 88 (24.7%) teams had initiated pilot testing, with 42 (11.8%) piloting with care providers and 24 (6.7%) with patients. Overall, 97 teams (8.1 per hackathon) drafted business plans, 22 (1.8 per hackathon) had filed patents on their innovations and 15 (1.3 per hackathon) had formed new companies. Teams raised US$64.08 million in funding (average US$5.34 million per hackathon; median award size of $1800). In addition, 108 teams (30.3%) reported at least one member working on additional technologies with people they met at a hackathon. Individual confidence to address medical technology challenges was significantly increased after attending (t(1282)=192.77, p 0.001). Conclusion CAMTech healthcare hackathons lead to consistent output with respect to medical technology innovation, including clinical trials, business plan development, securing investment capital/funding and new company formation. PMID:28250965

Predicting Consequences of Technological Disasters from Natural Hazard Events: Challenges and Opportunities Associated with Industrial Accident Data Sources

NASA Astrophysics Data System (ADS)

Wood, M.

2009-04-01

The increased focus on the possibility of technological accidents caused by natural events (Natech) is foreseen to continue for years to come. In this case, experts in prevention, mitigation and preparation activities associated with natural events will increasingly need to borrow data and expertise traditionally associated with the technological fields to carry out the work. An important question is how useful is the data for understanding consequences from such natech events. Data and case studies provided on major industrial accidents tend to focus on lessons learned for re-engineering the process. While consequence data are reported at least nominally in most reports, their precision, quality and completeness is often lacking. Consequences that are often or sometimes available but not provided can include severity and type of injuries, distance of victims from the source, exposure measurements, volume of the release, population in potentially affected zones, and weather conditions. Yet these are precisely the type of data that will aid natural hazard experts in land-use planning and emergency response activities when a Natech event may be foreseen. This work discusses the results of a study of consequence data from accidents involving toxic releases reported in the EU's MARS accident database. The study analysed the precision, quality and completeness of three categories of consequence data reported: the description of health effects, consequence assessment and chemical risk assessment factors, and emergency response information. This work reports on the findings from this study and discusses how natural hazards experts might interact with industrial accident experts to promote more consistent and accurate reporting of the data that will be useful in consequence-based activities.

Health effects of coal technologies: research needs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-09-01

In this 1977 Environmental Message, President Carter directed the establishment of a joint program to identify the health and environmental problems associated with advanced energy technologies and to review the adequacy of present research programs. In response to the President's directive, representatives of three agencies formed the Federal Interagency Committee on the Health and Environmental Effects of Energy Technologies. This report was prepared by the Health Effects Working Group on Coal Technologies for the Committee. In this report, the major health-related problems associated with conventional coal mining, storage, transportation, and combustion, and with chemical coal cleaning, in situ gasification, fluidizedmore » bed combustion, magnetohydrodynamic combustion, cocombustion of coal-oil mixtures, and cocombustion of coal with municipal solid waste are identified. The report also contains recommended research required to address the identified problems.« less

2013 DOE Vehicle Technologies Office Annual Merit Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

The 2013 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held May 13-17, 2013, in Crystal City, Virginia. The review encompassed all of the work done by the FCTO and the VTO: a total of 287 individual activities were reviewed for VTO, by a total of 187 reviewers. A total of 1,382 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide anmore » opportunity for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.« less

2014 DOE Vehicle Technologies Office Annual Merit Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The 2014 U.S. Department of Energy (DOE) Fuel Cell Technologies Office (FCTO) and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 16-20, 2014, in Washington, DC. The review encompassed all of the work done by the FCTO and the VTO: a total of 295 individual activities were reviewed for VTO, by a total of 179 reviewers. A total of 1,354 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunitymore » for industry, government, and academia to give inputs to DOE on the Office with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.« less

From troglodytes to information managers: information management and technology needs to achieve the primary care NHS modernization agenda--the views of three GPs.

PubMed

Rooney, I; Hornby, S

2000-09-01

In response to the information management and technology changes proposed by the Government's NHS modernization initiative this article examines the issues that GPs feel to be of major significance to their work. Although information and communications technology is widely used in general practice there is no one agreed standard system. The level of technology and the manner in which it is used is also diverse throughout the profession, as are the attitudes that exist amongst GPs regarding the value of information management and technology, and the benefits efficient information management offers to them and to their patients. The views of three local GPs from practices with varying levels of information technology were obtained through semi-structured interviews and the findings developed in the light of current discussions in the published literature. The GPs chosen reflect the disparity within general practice and, perhaps, other units of the NHS in the use and understanding of information management. The main conclusions were that there is ambivalence and scepticism about what NHSnet currently has to offer; that local electronic records benefit patient care, but when networked more widely problems of confidentiality and security result. Practitioners were also mindful of the financial costs of changes and concerned, given the impact of PCGs and clinical governance, as to who will be responsible for ensuring a common level of electronic records, IT provision, and financial and technological support.

Managing environmental issues during international electric power project development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, H.W.

1998-07-01

Responsible international project developers most often view environmental matters with quite mixed emotions. Those with whom Dynalytics has worked would certainly never contemplate jeopardizing the health of anyone in the world. But while they want their projects realized, and are willing to implement reasonable requirements, they are often asked to do more than is appropriate, more than is technologically possible, and more than is financially possible. The paper discusses the following: who is in charge of environmental matters; whose environmental standards apply; the role of technology; accelerating timetables and reducing costs; documentation and applications; and post-construction requirements.

Clear Speaking about Machines: People are Exploring Mars, Not Robots

NASA Technical Reports Server (NTRS)

Clancey, William J.

2006-01-01

The primary responsibility of all scientists is to ensure the integrity of their work. For cognitive and social scientists, this means first and foremost preserving clarity about what we know about people, and not allowing descriptions of technology to demean or obscure the reality of how people think, behave, and live. Without this clarity, engineering requirements analyses, tool design, and evaluations of people will be confused. A sharp, uncompromising understanding about the nature of people is essential if we are to design and fit new technologies that are appropriate and successful for NASA's mission operations.

Turning Europe"s innovation dream into a working reality

NASA Astrophysics Data System (ADS)

Tindemans, Peter

2008-08-01

Opened in 1865 after the American Civil War, the world renowned Massachusetts Institute of Technology (MIT) aimed to provide a flow of ideas from academic research to industry in response to increasing industrialization in the US. Since then, more than 71 Nobel laureates have passed through MIT's doors and it now has a budget of 2.2bn per year that is spent on teaching, knowledge creation and technological innovation. Given its success, it is no wonder then that Europe has plans to replicate the MIT model and create a similar European institute of its own.

Residential Customer Enrollment in Time-based Rate and Enabling Technology Programs: Smart Grid Investment Grant Consumer Behavior Study Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, Annika; Cappers, Peter; Goldman, Charles

2013-05-01

The U.S. Department of Energy’s (DOE’s) Smart Grid Investment Grant (SGIG) program is working with a subset of the 99 SGIG projects undertaking Consumer Behavior Studies (CBS), which examine the response of mass market consumers (i.e., residential and small commercial customers) to time-varying electricity prices (referred to herein as time-based rate programs) in conjunction with the deployment of advanced metering infrastructure (AMI) and associated technologies. The effort presents an opportunity to advance the electric industry’s understanding of consumer behavior.

Forecasting Ecological Genomics: High-Tech Animal Instrumentation Meets High-Throughput Sequencing

PubMed Central

Shafer, Aaron B. A.; Northrup, Joseph M.; Wikelski, Martin; Wittemyer, George; Wolf, Jochen B. W.

2016-01-01

Recent advancements in animal tracking technology and high-throughput sequencing are rapidly changing the questions and scope of research in the biological sciences. The integration of genomic data with high-tech animal instrumentation comes as a natural progression of traditional work in ecological genetics, and we provide a framework for linking the separate data streams from these technologies. Such a merger will elucidate the genetic basis of adaptive behaviors like migration and hibernation and advance our understanding of fundamental ecological and evolutionary processes such as pathogen transmission, population responses to environmental change, and communication in natural populations. PMID:26745372

A Wearable Textile 2D Touchpad Sensor Based on Screen-Printing Technology.

PubMed

Ferri, Josue; Lidón-Roger, Jose Vicente; Moreno, Jorge; Martinez, Gabriel; Garcia-Breijo, Eduardo

2017-12-20

Among many of the designs used in the detection of 2D gestures for portable technology, the touchpad is one of the most complex and with more functions to implement. Its development has undergone a great push due to its use in displays, but it is not widely used with other technologies. Its application on textiles could allow a wide range of applications in the field of medicine, sports, etc. Obtaining a flexible, robust touchpad with good response and low cost is one of the objectives of this work. A textile touchpad based on a diamond pattern design using screen printing technology has been developed. This technology is widely used in the textile industry and therefore does not require heavy investments. The developed prototypes were analyzed using a particular controller for projected capacitive technologies (pro-cap), which is the most used in gesture detection. Two different designs were used to obtain the best configuration, obtaining a good result in both cases.

A Wearable Textile 2D Touchpad Sensor Based on Screen-Printing Technology

PubMed Central

Ferri, Josue; Moreno, Jorge; Martinez, Gabriel

2017-01-01

Among many of the designs used in the detection of 2D gestures for portable technology, the touchpad is one of the most complex and with more functions to implement. Its development has undergone a great push due to its use in displays, but it is not widely used with other technologies. Its application on textiles could allow a wide range of applications in the field of medicine, sports, etc. Obtaining a flexible, robust touchpad with good response and low cost is one of the objectives of this work. A textile touchpad based on a diamond pattern design using screen printing technology has been developed. This technology is widely used in the textile industry and therefore does not require heavy investments. The developed prototypes were analyzed using a particular controller for projected capacitive technologies (pro-cap), which is the most used in gesture detection. Two different designs were used to obtain the best configuration, obtaining a good result in both cases. PMID:29261167

Considerations in the development of circulating tumor cell technology for clinical use

PubMed Central

2012-01-01

This manuscript summarizes current thinking on the value and promise of evolving circulating tumor cell (CTC) technologies for cancer patient diagnosis, prognosis, and response to therapy, as well as accelerating oncologic drug development. Moving forward requires the application of the classic steps in biomarker development–analytical and clinical validation and clinical qualification for specific contexts of use. To that end, this review describes methods for interactive comparisons of proprietary new technologies, clinical trial designs, a clinical validation qualification strategy, and an approach for effectively carrying out this work through a public-private partnership that includes test developers, drug developers, clinical trialists, the US Food & Drug Administration (FDA) and the US National Cancer Institute (NCI). PMID:22747748

The Evolvable Advanced Multi-Mission Operations System (AMMOS): Making Systems Interoperable

NASA Technical Reports Server (NTRS)

Ko, Adans Y.; Maldague, Pierre F.; Bui, Tung; Lam, Doris T.; McKinney, John C.

2010-01-01

The Advanced Multi-Mission Operations System (AMMOS) provides a common Mission Operation System (MOS) infrastructure to NASA deep space missions. The evolution of AMMOS has been driven by two factors: increasingly challenging requirements from space missions, and the emergence of new IT technology. The work described in this paper focuses on three key tasks related to IT technology requirements: first, to eliminate duplicate functionality; second, to promote the use of loosely coupled application programming interfaces, text based file interfaces, web-based frameworks and integrated Graphical User Interfaces (GUI) to connect users, data, and core functionality; and third, to build, develop, and deploy AMMOS services that are reusable, agile, adaptive to project MOS configurations, and responsive to industrially endorsed information technology standards.

Comparison of support vector machine classification to partial least squares dimension reduction with logistic descrimination of hyperspectral data

NASA Astrophysics Data System (ADS)

Wilson, Machelle; Ustin, Susan L.; Rocke, David

2003-03-01

Remote sensing technologies with high spatial and spectral resolution show a great deal of promise in addressing critical environmental monitoring issues, but the ability to analyze and interpret the data lags behind the technology. Robust analytical methods are required before the wealth of data available through remote sensing can be applied to a wide range of environmental problems for which remote detection is the best method. In this study we compare the classification effectiveness of two relatively new techniques on data consisting of leaf-level reflectance from plants that have been exposed to varying levels of heavy metal toxicity. If these methodologies work well on leaf-level data, then there is some hope that they will also work well on data from airborne and space-borne platforms. The classification methods compared were support vector machine classification of exposed and non-exposed plants based on the reflectance data, and partial east squares compression of the reflectance data followed by classification using logistic discrimination (PLS/LD). PLS/LD was performed in two ways. We used the continuous concentration data as the response during compression, and then used the binary response required during logistic discrimination. We also used a binary response during compression followed by logistic discrimination. The statistics we used to compare the effectiveness of the methodologies was the leave-one-out cross validation estimate of the prediction error.

Ordnance News

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bofman, Ryan K.

Since July of 2016 I have been assigned as a Guest Scientist at Los Alamos National Laboratory under the Training With Industries (TWI) Program. Los Alamos National Laboratory has proven to be a challenging and rewarding assignment in which I have found myself at the cutting edge of technologies pertinent to the Explosive Ordnance Disposal career field. In the last 7 months I have had the pleasure of working in an applications group that conducts research at the DOE “Q” and SCI levels. The group “uses a broad range of engineering and scientific expertise to support nuclear counter proliferation (NCP),more » nuclear counter terrorism (NCT), and nuclear emergency response (ER) missions. The Group contributes to national programs intended to protect, deter, and respond to weapons of mass destruction through tailored training and by using specialized applied electromagnetic solutions, rapid prototyping, designing/building/testing/delivering tools and trainers along with novel safing technologies, RF solutions, and cyberphysical applications”. While the specifics of the work performed are classified, the groups “core expertise includes pulsed power; EMP effects; nuclear weapons engineering; weapons effects and materials; predictive/hydrodynamic modeling and testing; firing and penalty systems; x-ray and non-destructive evaluation of threat devices; applied physics; advanced RF systems; powerline communications; novel electronics; 3-D printing of specialized components and cyber assessment/response technologies”. (int.lanl.gov/org/padgs/threat-identification-response/analytics-intelligencetechnology/ a-3/index.shtml)« less

Testimony from Learning Disabled College Writers on the Efficacy of Word Processing in their Writing Process. Working Paper.

ERIC Educational Resources Information Center

Collins, Terence; Price, Lynda

As part of a three-year federally funded research program intended to shed light on the writing processes of learning disabled college-aged writers (with special emphasis on the use of technology in creating workable mainstreamed curricula), this paper records in an interview format the responses of students to the program, including word…

The Online or E-Survey: A Research Approach for the ICT Age

ERIC Educational Resources Information Center

Glover, Derek; Bush, Tony

2005-01-01

E-technology as a basis of research is now being more widely considered as potential respondents can be drawn from an ever widening audience. Early work by others has shown that many respondents are keen to use the medium and that response rates are generally higher than by conventional approaches. This article summarizes the experience of…

The Environmental Assessment and Management (TEAM) Guide: Idaho Supplement

DTIC Science & Technology

2010-02-01

rsons u nder common control ). Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same...area ASTM American Society for Testing and Materials AWWA American Water Works Association BACT best available control technology BOD...biochemical oxygen demand BTEX benzene, toluene, elthylbenzene, xylene CAR control area responsible party CAS Chemical Abstract Service CEM continuous

College Students' Use of Electronic Communication Technologies: Introverts versus Extraverts.

ERIC Educational Resources Information Center

Brackin, Taryn; Ferguson, Elizabeth; Skelly, Brian; Chambliss, Catherine

This paper discusses a study that examines the responses of introverted and extraverted college students (N=72) to the use of e-mail. Results show that extraverts use e-mail as a form of procrastination more than introverts and that extraverts find e-mail more disruptive to their work than introverts. No significant differences were found in terms…

The development of infrared detectors and mechanisms for use in future infrared space missions

NASA Technical Reports Server (NTRS)

Houck, James R.

1995-01-01

The environment above earth's atmosphere offers significant advantages in sensitivity and wavelength coverage in infrared astronomy over ground-based observatories. In support of future infrared space missions, technology development efforts were undertaken to develop detectors sensitive to radiation between 2.5 micron and 200 micron. Additionally, work was undertaken to develop mechanisms supporting the imaging and spectroscopy requirements of infrared space missions. Arsenic-doped-Silicon and Antimony-doped-Silicon Blocked Impurity Band detectors, responsive to radiation between 4 micron and 45 micron, were produced in 128x128 picture element arrays with the low noise, high sensitivity performance needed for space environments. Technology development continued on Gallium-doped-Germanium detectors (for use between 80 micron and 200 micron), but were hampered by contamination during manufacture. Antimony-doped-Indium detectors (for use between 2.5 micron and 5 micron) were developed in a 256x256 pixel format with high responsive quantum efficiency and low dark current. Work began on adapting an existing cryogenic mechanism design for space-based missions; then was redirected towards an all-fixed optical design to improve reliability and lower projected mission costs.

Deployment of Small Unmanned Aerial Systems (sUAS) in Emergency and Disaster Response Scenarios to Support Local Emergency Management Agencies

NASA Astrophysics Data System (ADS)

Calamaio, C. L.; Walker, J.; Beck, J. M.; Graves, S. J.; Johnson, C.

2017-12-01

Researchers at the Information Technology and Systems Center at the University of Alabama in Huntsville are working closely with the Madison County Emergency Management Agency (EMA), GeoHuntsville's UAS Working Group, and the NOAA UAS Program Office, to conduct a series of practical demonstrations testing the use of small unmanned aerial systems (sUAS) for emergency response activities in Madison County, Alabama. These exercises demonstrate the use of UAS to detect and visualize hazards in affected areas via the delivery of aerial imagery and associated data products to law enforcement first responders in a variety of different scenarios, for example, search and rescue, tornado track mapping, damage assessment, and situational awareness/containment during active shooter incidents. In addition to showcasing the use of UAS as a tool for emergency services, these pilot exercises provide the opportunity to engage the appropriate stakeholders from several communities including first responders, geospatial intelligence, active members of the unmanned systems industry, and academia. This presentation will showcase the challenges associated with delivering quality data products for emergency services in a timely manner as well as the related challenges in integrating the technology into local emergency management.

A Response Function Approach for Rapid Far-Field Tsunami Forecasting

NASA Astrophysics Data System (ADS)

Tolkova, Elena; Nicolsky, Dmitry; Wang, Dailin

2017-08-01

Predicting tsunami impacts at remote coasts largely relies on tsunami en-route measurements in an open ocean. In this work, these measurements are used to generate instant tsunami predictions in deep water and near the coast. The predictions are generated as a response or a combination of responses to one or more tsunameters, with each response obtained as a convolution of real-time tsunameter measurements and a pre-computed pulse response function (PRF). Practical implementation of this method requires tables of PRFs in a 3D parameter space: earthquake location-tsunameter-forecasted site. Examples of hindcasting the 2010 Chilean and the 2011 Tohoku-Oki tsunamis along the US West Coast and beyond demonstrated high accuracy of the suggested technology in application to trans-Pacific seismically generated tsunamis.

Vying for time. Work and family.

PubMed

Martinez, M N; Overman, S; Thornburg, L

1990-08-01

Time--there is never enough of it. There are never enough hours in the day to do everything at work and at home. Today's employees, forced to choose between work obligations and family responsibilities, often feel frazzled and guilty. Some employers recognize these conflicts and are finding ways to lighten the work/family load. They are offering a sophisticated combination of dependent-care options, flexible work hours and family-related benefits tailored to meet the needs of the employees within their specific industries. HRMagazine looks at leaders in six major industries--manufacturing, health, communications/technology, financial management, government and retail. No one can give employees that 25-hour day that everyone feels they need to juggle all their work and family obligations. But these industry leaders have provided a nurturing environment where employees can successfully balance those obligations.

US/China Energy and Environmental Technology Center (EETC) international business development and technology transfer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsieh, S.T.; Atwood, T.; Qiu Daxiong

1997-12-31

Since January 1997, the US/China Energy and Environmental Technology Center (EETC) in Beijing has been jointly operated by Tulane University and Tsinghua University. EETC is established to encourage the adoption of technologies for energy production with improved environmental performance which are essential for supporting economic growth and managing the Global Warming and Climate Change issues. International cooperation is critical to insure the environmental and energy security on a global basis. For example, the US has acquired a great deal of useful experience in clean coal technology which has been demonstrated with major utilities in commercial operations. The adaption of, andmore » the installation of, clean coal technology should be given high priority. Worldwide, the continuous exchange of information and technology between developed and developing nations relating to the current and future clean coal technologies is of great importance. Developed nations which possess environmental responsive technologies and financial resources should work closely with developing nations to facilitate technology transfer and trade of technologies. International cooperation will lower the cost of deploying clean coal technologies directed toward the clean production of energy. This paper presents the updated activities of EETC on facilitating technology transfer and promoting the clean use of coal to satisfy growing energy demand in China.« less

Psychosocial risks, burnout and intention to quit following the introduction of new software at work.

PubMed

Knani, Mouna; Fournier, Pierre-Sébastien; Biron, Caroline

2018-05-01

Despite a rich literature on association between psychosocial factors, the demand-control-support (DCS) model and burnout, there are few integrated frameworks encompassing the DCS model, burnout and intention to quit, particularly in a technological context. This manuscript examines the relationships between psychosocial risks, the demand-control-support (DCS) model, burnout syndrome and intention to quit following the introduction of new software at work. Data was collected from agents and advisors working at a Canadian university and using newstudy management software. An online questionnaire was sent via the university's internal mail. Finally, 112 people completed the online survey for a response rate of 60.9% . The results of structural equation modeling show that psychological demands, decision latitude and social support are associated with burnout. It is also clear that burnout, in particular depersonalization and emotional exhaustion, is positively associated with intention to quit. The few studies that raise the negative consequences of technology on quality of life in the workplace, and particularly on health, have not succeeded in establishing a direct link between a deterioration of health and the use of technology. This is due to the fact that there are few epidemiological studies on the direct consequences of the use of ITC on health.

Ambulance Design Survey 2011: A Summary Report

PubMed Central

Lee, Y Tina; Kibira, Deogratias; Feeney, Allison Barnard; Marshall, Jennifer

2013-01-01

Current ambulance designs are ergonomically inefficient and often times unsafe for practical treatment response to medical emergencies. Thus, the patient compartment of a moving ambulance is a hazardous working environment. As a consequence, emergency medical services (EMS) workers suffer fatalities and injuries that far exceed those of the average work place in the United States. To reduce injury and mortality rates in ambulances, the Department of Homeland Security Science and Technology Directorate has teamed with the National Institute of Standards and Technology, the National Institute for Occupational Safety and Health, and BMT Designers & Planners in a joint project to produce science-based ambulance patient compartment design standards. This project will develop new crash-safety design standards and improved user-design interface guidance for patient compartments that are safer for EMS personnel and patients, and facilitate improved patient care. The project team has been working with practitioners, EMS workers’ organizations, and manufacturers to solicit needs and requirements to address related issues. This paper presents an analysis of practitioners’ concerns, needs, and requirements for improved designs elicited through the web-based survey of ambulance design, held by the National Institute of Standards and Technology. This paper also introduces the survey, analyzes the survey results, and discusses recommendations for future ambulance patient compartments design. PMID:26401439

Science, information, technology, and the changing character of public policy in non-point source pollution

NASA Astrophysics Data System (ADS)

King, John L.; Corwin, Dennis L.

Information technologies are already delivering important new capabilities for scientists working on non-point source (NPS) pollution in the vadose zone, and more are expected. This paper focuses on the special contributions of modeling and network communications for enhancing the effectiveness of scientists in the realm of policy debates regarding NPS pollution mitigation and abatement. The discussion examines a fundamental shift from a strict regulatory strategy of pollution control characterized by a bureaucratic/technical alliance during the period through the 1970's and early 1980's, to a more recently evolving paradigm of pluralistic environmental management. The role of science and scientists in this shift is explored, with special attention to the challenges facing scientists working in NPS pollution in the vadose zone. These scientists labor under a special handicap in the evolving model because their scientific tools are often times incapable of linking NPS pollution with individuals responsible for causing it. Information can facilitate the effectiveness of these scientists in policy debates, but not under the usual assumptions in which scientific truth prevails. Instead, information technology's key role is in helping scientists shape the evolving discussion of trade-offs and in bringing citizens and policymakers closer to the routine work of scientists.

A nonlinear contextually aware prompting system (N-CAPS) to assist workers with intellectual and developmental disabilities to perform factory assembly tasks: system overview and pilot testing.

PubMed

Mihailidis, A; Melonis, M; Keyfitz, R; Lanning, M; Van Vuuren, S; Bodine, C

2016-10-01

This paper presents a new cognitive assistive technology, nonlinear contextually aware prompting system (N-CAPS) that uses advanced sensing and artificial intelligence to monitor and provide assistance to workers with cognitive disabilities during a factory assembly task. The N-CAPS system was designed through the application of various computer vision and artificial intelligence algorithms that allows the system to track a user during a specific assembly task, and then provide verbal and visual prompts to the worker as needed. A pilot study was completed with the N-CAPS solution in order to investigate whether it was an appropriate intervention. Four participants completed the required assembly task five different times, using the N-CAPS system. The participants completed all of the trials that they attempted with 85.7% of the steps completed without assistance from the job coach. Of the 85.7% of steps completed independently, 32.5% of these were completed in response to prompts given by N-CAPS. Overall system accuracy was 83.3%, the overall sensitivity was 86.2% and the overall specificity was 82.4%. The results from the study were positive in that they showed that this type of technology does have merit with this population. Implications for Rehabilitation It provides a concise summary of the importance of work in the lives of people with intellectual disabilities and how technology can support this life goal. It describes the first artificially intelligent system designed to support workers with intellectually disabilities. It provides evidence that individuals with intellectual disabilities can perform a work task in response to technology.

Design of a virtual reality based adaptive response technology for children with autism.

PubMed

Lahiri, Uttama; Bekele, Esubalew; Dohrmann, Elizabeth; Warren, Zachary; Sarkar, Nilanjan

2013-01-01

Children with autism spectrum disorder (ASD) demonstrate potent impairments in social communication skills including atypical viewing patterns during social interactions. Recently, several assistive technologies, particularly virtual reality (VR), have been investigated to address specific social deficits in this population. Some studies have coupled eye-gaze monitoring mechanisms to design intervention strategies. However, presently available systems are designed to primarily chain learning via aspects of one's performance only which affords restricted range of individualization. The presented work seeks to bridge this gap by developing a novel VR-based interactive system with Gaze-sensitive adaptive response technology that can seamlessly integrate VR-based tasks with eye-tracking techniques to intelligently facilitate engagement in tasks relevant to advancing social communication skills. Specifically, such a system is capable of objectively identifying and quantifying one's engagement level by measuring real-time viewing patterns, subtle changes in eye physiological responses, as well as performance metrics in order to adaptively respond in an individualized manner to foster improved social communication skills among the participants. The developed system was tested through a usability study with eight adolescents with ASD. The results indicate the potential of the system to promote improved social task performance along with socially-appropriate mechanisms during VR-based social conversation tasks.

Design of a Virtual Reality Based Adaptive Response Technology for Children With Autism

PubMed Central

Lahiri, Uttama; Bekele, Esubalew; Dohrmann, Elizabeth; Warren, Zachary; Sarkar, Nilanjan

2013-01-01

Children with autism spectrum disorder (ASD) demonstrate potent impairments in social communication skills including atypical viewing patterns during social interactions. Recently, several assistive technologies, particularly virtual reality (VR), have been investigated to address specific social deficits in this population. Some studies have coupled eye-gaze monitoring mechanisms to design intervention strategies. However, presently available systems are designed to primarily chain learning via aspects of one’s performance only which affords restricted range of individualization. The presented work seeks to bridge this gap by developing a novel VR-based interactive system with Gaze-sensitive adaptive response technology that can seamlessly integrate VR-based tasks with eye-tracking techniques to intelligently facilitate engagement in tasks relevant to advancing social communication skills. Specifically, such a system is capable of objectively identifying and quantifying one’s engagement level by measuring real-time viewing patterns, subtle changes in eye physiological responses, as well as performance metrics in order to adaptively respond in an individualized manner to foster improved social communication skills among the participants. The developed system was tested through a usability study with eight adolescents with ASD. The results indicate the potential of the system to promote improved social task performance along with socially-appropriate mechanisms during VR-based social conversation tasks. PMID:23033333

Models and methods for assessing the value of HVDC and MVDC technologies in modern power grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Makarov, Yuri V.; Elizondo, Marcelo A.; O'Brien, James G.

This report reflects the results of U.S. Department of Energy’s (DOE) Grid Modernization project 0074 “Models and methods for assessing the value of HVDC [high-voltage direct current] and MTDC [multi-terminal direct current] technologies in modern power grids.” The work was done by the Pacific Northwest National Laboratory (PNNL) and Oak Ridge National Laboratory (ORNL) in cooperation with Mid-Continent Independent System Operator (MISO) and Siemens. The main motivation of this study was to show the benefit of using direct current (DC) systems larger than those in existence today as they overlap with the alternating current (AC) systems. Proper use of theirmore » flexibility in terms of active/reactive power control and fast response can provide much-needed services to the grid at the same time as moving large blocks of energy to take advantage of cost diversity. Ultimately, the project’s success will enable decision-makers and investors to make well-informed decisions regarding this use of DC systems. This project showed the technical feasibility of HVDC macrogrid for frequency control and congestion relief in addition to bulk power transfers. Industry-established models for commonly used technologies were employed, along with high-fidelity models for recently developed HVDC converter technologies; like the modular multilevel converters (MMCs), a voltage source converters (VSC). Models for General Electric Positive Sequence Load Flow (GE PSLF) and Siemens Power System Simulator (PSS/E), widely used analysis programs, were for the first time adapted to include at the same time both Western Electricity Coordinating Council (WECC) and Eastern Interconnection (EI), the two largest North American interconnections. The high-fidelity models and their control were developed in detail for MMC system and extended to HVDC systems in point-to-point and in three-node multi-terminal configurations. Using a continental-level mixed AC-DC grid model, and using a HVDC macrogrid power flow and transient stability model, the results showed that the HVDC macrogrid relieved congestion and mitigated loop flows in AC networks, and provided up to 24% improvement in frequency responses. These are realistic studies, based on the 2025 heavy summer and EI multi-regional modeling working group (MMWG) 2026 summer peak cases. This work developed high-fidelity models and simulation algorithms to understand the dynamics of MMC. The developed models and simulation algorithms are up to 25 times faster than the existing algorithms. Models and control algorithms for high-fidelity models were designed and tested for point-to-point and multi-terminal configurations. The multi-terminal configuration was tested connecting simplified models of EI, WI, and Electric Reliability Council of Texas (ERCOT). The developed models showed up to 45% improvement in frequency response with the connection of all the three asynchronous interconnections in the United States using fast and advanced DC technologies like the multi-terminal MMC-DC system. Future work will look into developing high-fidelity models of other advanced DC technologies, combining high-fidelity models with the continental-level model, incorporating additional services. More scenarios involving large-scale HVDC and MTDC will be evaluated.« less

The NASA Applied Science Program Disasters Area: Disaster Applications Research and Response

NASA Astrophysics Data System (ADS)

Murray, J. J.; Lindsay, F. E.; Stough, T.; Jones, C. E.

2014-12-01

The goal of the Natural Disaster Application Area is to use NASA's capabilities in spaceborne, airborne, surface observations, higher-level derived data products, and modeling and data analysis to improve natural disaster forecasting, mitigation, and response. The Natural Disaster Application Area applies its remote sensing observations, modeling and analysis capabilities to provide hazard and disaster information where and when it is needed. Our application research activities specifically contribute to 1) Understanding the natural processes that produce hazards, 2)Developing hazard mitigation technologies, and 3)Recognizing vulnerability of interdependent critical infrastructure. The Natural Disasters Application area selects research projects through a rigorous, impartial peer-review process that address a broad spectrum of disasters which afflict populations within the United States, regionally and globally. Currently there are 19 active projects in the research portfolio which address the detection, characterization, forecasting and response to a broad range of natural disasters including earthquakes, tsunamis, volcanic eruptions and ash dispersion, wildfires, hurricanes, floods, tornado damage assessment, oil spills and disaster data mining. The Disasters team works with federal agencies to aid the government in meeting the challenges associated with natural disaster response and to transfer technologies to agencies as they become operational. Internationally, the Disasters Area also supports the Committee on Earth Observations Working Group on Disasters, and the International Charter on Space and Disasters to increase, strengthen, and coordinate contributions of NASA Earth-observing satellites and applications products to disaster risk management. The CEOS group will lead pilot efforts focused on identifying key systems to support flooding, earthquake, and volcanic events.

Organizational, Cultural, and Psychological Determinants of Smart Infusion Pump Work Arounds: A Study of 3 U.S. Health Systems.

PubMed

Dunford, Benjamin B; Perrigino, Matthew; Tucker, Sharon J; Gaston, Cynthia L; Young, Jim; Vermace, Beverly J; Walroth, Todd A; Buening, Natalie R; Skillman, Katherine L; Berndt, Dawn

2017-09-01

We investigated nurse perceptions of smart infusion medication pumps to provide evidence-based insights on how to help reduce work around and improve compliance with patient safety policies. Specifically, we investigated the following 3 research questions: (1) What are nurses' current attitudes about smart infusion pumps? (2) What do nurses think are the causes of smart infusion pump work arounds? and (3) To whom do nurses turn for smart infusion pump training and troubleshooting? We surveyed a large number of nurses (N = 818) in 3 U.S.-based health care systems to address the research questions above. We assessed nurses' opinions about smart infusion pumps, organizational perceptions, and the reasons for work arounds using a voluntary and anonymous Web-based survey. Using qualitative research methods, we coded open-ended responses to questions about the reasons for work arounds to organize responses into useful categories. The nurses reported widespread satisfaction with smart infusion pumps. However, they reported numerous organizational, cultural, and psychological causes of smart pump work arounds. Of 1029 open-ended responses to the question "why do smart pump work arounds occur?" approximately 44% of the causes were technology related, 47% were organization related, and 9% were related to individual factors. Finally, an overwhelming majority of nurses reported seeking solutions to smart pump problems from coworkers and being trained primarily on the job. Hospitals may significantly improve adherence to smart pump safety features by addressing the nontechnical causes of work arounds and by providing more leadership and formalized training for resolving smart pump-related problems.

Systems to support health technology assessment (HTA) in member states of the European union with limited institutionalization of HTA.

PubMed

Moharra, Montse; Espallargues, Mireia; Kubesch, Nadine; Estrada, Maria-Dolors; Parada, Antoni; Vondeling, Hindrik; Lo Scalzo, Alessandra; Cristofides, Stelios; Turk, Eva; Raab, Martin

2009-12-01

The aim of this study was to support health technology assessment (HTA) capacity building in Member States of the European Union with limited experience or without institutionalized HTA. The main output is a Handbook on HTA Capacity Building. The methods used were worldwide surveys of (i) HTA organizations, (ii) information management units, and (iii) HTA educational programs. The results of two surveys (i & ii) were combined with expert opinion to produce the Handbook on HTA Capacity Building. Survey of HTA organizations (n = 41, response rate 35 percent). Most of the organizations were established by the government (61 percent), and all were not-for-profit. Working on HTA (80.5 percent) and doing research (63.4 percent) were the main lines of activity. Survey on information management units (n = 23, response rate 23 percent). Most (74.2 percent) of the responding HTA agencies reported having personnel dedicated to HTA information services. Survey on HTA educational programs (n = 48, response rate 60 percent). In total, nine Master of Science (MSc) programs were identified (three MSc in HTA and six MSc in HTA-related areas). Handbook on HTA Capacity Building. A group of twenty experts from thirteen countries developed the handbook. It consists of nine chapters focusing on HTA institutional development (structural setup, work processes, and visibility). Setting up organizational structures and establishing effective HTA programs that guide key policy decisions is a challenging task. There are no standard models or pathways. "One size fits all" is not a useful principle because of the wide systemic and cultural differences between countries. The Handbook on HTA Capacity Building includes approaches for overall institutional development, especially in formulating objectives, setting up structures, and defining work processes.

Transforming consumer health informatics through a patient work framework: connecting patients to context

PubMed Central

Valdez, Rupa S; Holden, Richard J; Novak, Laurie L; Veinot, Tiffany C

2015-01-01

Designing patient-centered consumer health informatics (CHI) applications requires understanding and creating alignment with patients’ and their family members’ health-related activities, referred to here as ‘patient work’. A patient work approach to CHI draws on medical social science and human factors engineering models and simultaneously attends to patients, their family members, activities, and context. A patient work approach extends existing approaches to CHI design that are responsive to patients’ biomedical realities and personal skills and behaviors. It focuses on the embeddedness of patients’ health management in larger processes and contexts and prioritizes patients’ perspectives on illness management. Future research is required to advance (1) theories of patient work, (2) methods for assessing patient work, and (3) techniques for translating knowledge of patient work into CHI application design. Advancing a patient work approach within CHI is integral to developing and deploying consumer-facing technologies that are integrated with patients’ everyday lives. PMID:25125685

Mobile collaborative medical display system.

PubMed

Park, Sanghun; Kim, Wontae; Ihm, Insung

2008-03-01

Because of recent advances in wireless communication technologies, the world of mobile computing is flourishing with a variety of applications. In this study, we present an integrated architecture for a personal digital assistant (PDA)-based mobile medical display system that supports collaborative work between remote users. We aim to develop a system that enables users in different regions to share a working environment for collaborative visualization with the potential for exploring huge medical datasets. Our system consists of three major components: mobile client, gateway, and parallel rendering server. The mobile client serves as a front end and enables users to choose the visualization and control parameters interactively and cooperatively. The gateway handles requests and responses between mobile clients and the rendering server for efficient communication. Through the gateway, it is possible to share working environments between users, allowing them to work together in computer supported cooperative work (CSCW) mode. Finally, the parallel rendering server is responsible for performing heavy visualization tasks. Our experience indicates that some features currently available to our mobile clients for collaborative scientific visualization are limited due to the poor performance of mobile devices and the low bandwidth of wireless connections. However, as mobile devices and wireless network systems are experiencing considerable elevation in their capabilities, we believe that our methodology will be utilized effectively in building quite responsive, useful mobile collaborative medical systems in the very near future.

Johnson Space Center Research and Technology Report

NASA Technical Reports Server (NTRS)

Pido, Kelle; Davis, Henry L. (Technical Monitor)

1999-01-01

As the principle center for NASA's Human Exploration and Development of Space (HEDS) Enterprise, the Johnson Space Center (JSC) leads NASA's development of human spacecraft, human support systems, and human spacecraft operations. To implement this mission, JSC has focused on developing the infrastructure and partnerships that enable the technology development for future NASA programs. In our efforts to develop key technologies, we have found that collaborative relationships with private industry and academia strengthen our capabilities, infuse innovative ideas, and provide alternative applications for our development projects. The American public has entrusted NASA with the responsibility for space--technology development, and JSC is committed to the transfer of the technologies that we develop to the private sector for further development and application. It is our belief that commercialization of NASA technologies benefits both American industry and NASA through technology innovation and continued partnering. To this end, we present the 1998-1999 JSC Research and Technology Report. As your guide to the current JSC technologies, this report showcases the projects in work at JSC that may be of interest to U.S. industry, academia, and other government agencies (federal, state, and local). For each project, potential alternative uses and commercial applications are described.

Analysis of knowledge in Astronomy of the students of the Course of Technology in Industrial Automation at the Federal Institute of Education, Science and Technology of São Paulo - Campus Cubatao

NASA Astrophysics Data System (ADS)

Moraes, A. C.

2014-02-01

This work is part of a research of the academic Masters in Science in Education. It seeks to present the results of the survey conducted among students of the technology course in industrial automation at the Federal Institute of Education, Science and Technology of São Paulo at the Campus Cubatão (IFSP Campus Cubatão). In the first step, the students' lack of knowledge to the related primary concepts of Astronomy turned out. In a second step, a Basic Course in Astronomy was held outside the syllabus, including classes, lectures and films with pertinent content, which corrected initially found erros. Through a special approach, containing diverse teaching strategies, astronomical concepts were learned or relearned. Analysing the responses of this second step it was found that students had a significant improvement in learning.

Autonomous System Technologies for Resilient Airspace Operations

NASA Technical Reports Server (NTRS)

Houston, Vincent E.; Le Vie, Lisa R.

2017-01-01

Increasing autonomous systems within the aircraft cockpit begins with an effort to understand what autonomy is and developing the technology that encompasses it. Autonomy allows an agent, human or machine, to act independently within a circumscribed set of goals; delegating responsibility to the agent(s) to achieve overall system objective(s). Increasingly Autonomous Systems (IAS) are the highly sophisticated progression of current automated systems toward full autonomy. Working in concert with humans, these types of technologies are expected to improve the safety, reliability, costs, and operational efficiency of aviation. IAS implementation is imminent, which makes the development and the proper performance of such technologies, with respect to cockpit operation efficiency, the management of air traffic and data communication information, vital. A prototype IAS agent that attempts to optimize the identification and distribution of "relevant" air traffic data to be utilized by human crews during complex airspace operations has been developed.

Overview of NASA's In Space Robotic Servicing

NASA Technical Reports Server (NTRS)

Reed, Benjamin B.

2015-01-01

The panel discussion will start with a presentation of the work of the Satellite Servicing Capabilities Office (SSCO), a team responsible for the overall management, coordination, and implementation of satellite servicing technologies and capabilities for NASA. Born from the team that executed the five Hubble servicing missions, SSCO is now maturing a core set of technologies that support both servicing goals and NASA's exploration and science objectives, including: autonomous rendezvous and docking systems; dexterous robotics; high-speed, fault-tolerant computing; advanced robotic tools, and propellant transfer systems. SSCOs proposed Restore-L mission, under development since 2009, is rapidly advancing the core capabilities the fledgling satellite-servicing industry needs to jumpstart a new national industry. Restore-L is also providing key technologies and core expertise to the Asteroid Redirect Robotic Mission (ARRM), with SSCO serving as the capture module lead for the ARRM effort. Reed will present a brief overview of SSCOs history, capabilities and technologies.

Methodolgy For Evaluation Of Technology Impacts In Space Electric Power Systems

NASA Technical Reports Server (NTRS)

Holda, Julie

2004-01-01

The Analysis and Management branch of the Power and Propulsion Office at NASA Glenn Research Center is responsible for performing complex analyses of the space power and In-Space propulsion products developed by GRC. This work quantifies the benefits of the advanced technologies to support on-going advocacy efforts. The Power and Propulsion Office is committed to understanding how the advancement in space technologies could benefit future NASA missions. They support many diverse projects and missions throughout NASA as well as industry and academia. The area of work that we are concentrating on is space technology investment strategies. Our goal is to develop a Monte-Carlo based tool to investigate technology impacts in space electric power systems. The framework is being developed at this stage, which will be used to set up a computer simulation of a space electric power system (EPS). The outcome is expected to be a probabilistic assessment of critical technologies and potential development issues. We are developing methods for integrating existing spreadsheet-based tools into the simulation tool. Also, work is being done on defining interface protocols to enable rapid integration of future tools. Monte Carlo-based simulation programs for statistical modeling of the EPS Model. I decided to learn and evaluate Palisade's @Risk and Risk Optimizer software, and utilize it's capabilities for the Electric Power System (EPS) model. I also looked at similar software packages (JMP, SPSS, Crystal Ball, VenSim, Analytica) available from other suppliers and evaluated them. The second task was to develop the framework for the tool, in which we had to define technology characteristics using weighing factors and probability distributions. Also we had to define the simulation space and add hard and soft constraints to the model. The third task is to incorporate (preliminary) cost factors into the model. A final task is developing a cross-platform solution of this framework.

Blood work. Canadian nursing and blood transfusion, 1942-1990.

PubMed

Toman, C

2001-01-01

The extension of blood transfusion to civilian populations was contingent on the availability of a nursing workforce capable of taking on increasingly responsible roles. Nurses assumed a variety of roles as they incorporated blood work into patient care and, in the process, enabled, embodied, and engendered it as nurses' and women's work. Initially, the student workforce facilitated transfusion through roles that were congruent with nursing's domestic roots. Later, it constrained the expansion of blood work because of its perpetually novice nature. Delegation constituted one strategy by which a limited number of persons could become experienced and autonomous in a particular role. As long as the skill remained limited, nurses shared its associated power and status, which differentiated them within the work culture. A few women were able to shape blood work to their advantage, using their expertise either as job security or as a bargaining point to negotiate better working conditions. However, when the skill was routinized and dispersed among many nurses, it became dirty work. The examination of one specific technology that shifted from medicine into nursing contributes insights to current issues of expanded roles and delegated skills. Nurses need to question seriously what is gained and lost as they take on and let go of technologies. They need to consider what kinds of knowledge will be needed and how best to develop it. Finally, they need to reflect how changes might complicate care giving and nurses' work.

Technology, public policy and control of transboundary livestock diseases in our lifetimes.

PubMed

Breeze, R G

2006-04-01

There are no technological barriers to eliminating major transboundary livestock diseases. 'Elimination' means that diseases no longer threaten livestock in the developed world nor the livelihoods of hundreds of millions of small farmers elsewhere. The problem is not lack of technology but failure of public policy. Developed country policy should actively combat accidental and intentional introductions; protect livestock against future advanced biological weapons; minimise the economic impacts after introduction by any means; abandon mass slaughter as a control tool; engage in disease removal in pursuit of a global economic, societal, and environmental agenda; and make appropriate national and cooperative investments. This is the moment for policy change because transboundary livestock disease elimination now involves powerful government ministries outside ministries of agriculture that are concerned about disease threats from many sources. Change can acquire support from the public and many organisations with shared interests. New policy is needed to change the belief that government is solely responsible for excluding disease, responding to introductions, and compensating farmers for losses during eradication. Effective border control and domestic preparedness programmes depend upon government and industry working together with costs falling upon those responsible in the form of 'user fees'. Compensation for stock slaughtered during outbreak control should be covered by private insurance. Government and industry should share the costs of an effective surveillance, diagnostic and response system. Surveillance must achieve or approach real-time understanding of the disease situation at all stages and in all places and be accessible over the Internet by diverse government agencies and stakeholders in-country and abroad. Traditional responses must be abandoned because they encourage terrorism. Regulatory approval processes must be modernized because they cannot keep up with new technology.

Responsive materials for self-regulated insulin delivery.

PubMed

Wu, Weitai; Zhou, Shuiqin

2013-11-01

With diabetes mellitus becoming an important public health concern, insulin-delivery systems are attracting increasing interest from both scientific and technological researchers. This feature article covers the present state-of-the-art glucose-responsive insulin-delivery system (denoted as GRIDS), based on responsive polymer materials, a promising system for self-regulated insulin delivery. Three types of GRIDS are discussed, based on different fundamental mechanisms of glucose-recognition, with: a) glucose enzyme, b) glucose binding protein, and c) synthetic boronic acid as the glucose-sensitive component. At the end, a personal perspective on the major issues yet to be worked out in future research is provided. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

America COMPETES Act: Programs, Funding, and Selected Issues

DTIC Science & Technology

2008-01-22

Additional congressional actions also focused on increasing corporate spending on research and development in response to competitiveness concerns...NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Congressional Research Service ,101 Independence...States may not be able to compete economically with other nations in the future due to insufficient investment today in science and technology research

Advanced optical coatings for astronomical instrumentation

NASA Astrophysics Data System (ADS)

Pradal, Fabien; Leplan, Hervé; Vayssade, Hervé; Geyl, Roland

2016-07-01

Recently Safran Reosc worked and progressed on various thin film technology for: Large mirrors with low stress and stable coatings. Large lens elements with strong curvature and precise layer specifications. Large filters with high spectral response uniformity specifications. IR coatings with low stress and excellent resistance to cryogenic environment for NIR to LWIR domains. Pixelated coatings. Results will be presented and discussed on the basis of several examples.

Start-Up Response of Fluid Film Lubricated Cryogenic Turbopumps (Preprint)

DTIC Science & Technology

2007-06-13

Northrop Grumman Space & Mission Systems Corp. Space Technology One Space Park Redondo Beach CA 90278 AFRL-PR-ED-TP-2007-332 9. SPONSORING...Chuck Papesh and Mr. Gordon Dressler ( Northrop Grumman ) for their interest in the work. American Institute of Aeronautics and Astronautics 11...phn.tamu.edu/TRIBGroup http://phn.tamu.edu/me626 Thanks to AFRL & Northrop Grumman for interest & financial support

Beyond Earth's Boundaries: Human Exploration of the Solar System in the 21st Century. 1988 Annual Report to the Administrator.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Washington, DC. Office of Exploration.

In June 1987, the National Aeronautics and Space Administration (NASA) Administrator established the Office of Exploration in response to a national need for a long-term goal to energize the civilian space program and stimulate the development of new technology. This document describes work accomplished in developing the knowledge base that will…

East Europe Report, Economic and Industrial Affairs

DTIC Science & Technology

1984-08-31

his work, for labor and technological discipline. We are talking about an extraordinarily demanding and responsible function which requires the full...for meeting the needs and demands of the domestic as well as foreign markets . The combination of these two viable production sectors characterizes... market goods and services. We must take account of a most pronounced decrease in demand for broad consumer goods reflecting a higher living stand

The National Shipbuilding Reseaerch Program, Proceedings of the IREAPS Technical Symposium, Paper No. 8: Modern Ship Repair Technology Applied to Naval Vessels (The National Shipbuilding Research Program)

DTIC Science & Technology

1982-09-01

ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT SAR 18. NUMBER OF PAGES 20 19a. NAME OF RESPONSIBLE...progressed; and, on netowrks of a higher level. This feature enables the user to reschedule work as the situation changes. Moreover, impact of late

Solving challenges in inter- and trans-disciplinary working teams: Lessons from the surgical technology field.

PubMed

Korb, Werner; Geißler, Norman; Strauß, Gero

2015-03-01

Engineering a medical technology is a complex process, therefore it is important to include experts from different scientific fields. This is particularly true for the development of surgical technology, where the relevant scientific fields are surgery (medicine) and engineering (electrical engineering, mechanical engineering, computer science, etc.). Furthermore, the scientific field of human factors is important to ensure that a surgical technology is indeed functional, process-oriented, effective, efficient as well as user- and patient-oriented. Working in such trans- and inter-disciplinary teams can be challenging due to different working cultures. The intention of this paper is to propose an innovative cooperative working culture for the interdisciplinary field of computer-assisted surgery (CAS) based on more than ten years of research on the one hand and the interdisciplinary literature on working cultures and various organizational theories on the other hand. In this paper, a retrospective analysis of more than ten years of research work in inter- and trans-disciplinary teams in the field of CAS will be performed. This analysis is based on the documented observations of the authors, the study reports, protocols, lab reports and published publications. To additionally evaluate the scientific experience in an interdisciplinary research team, a literature analysis regarding scientific literature on trans- and inter-disciplinarity was performed. Own research and literature analyses were compared. Both the literature and the scientific experience in an interdisciplinary research team show that consensus finding is not always easy. It is, however, important to start trans- and interdisciplinary projects with a shared mental model and common goals, which include communication and leadership issues within the project teams, i.e. clear and unambiguous information about the individual responsibilities and objectives to attain. This is made necessary due to differing leadership cultures within the cooperating disciplines. Another research outcome is the relevance of a cooperative learning culture throughout the complete duration of the project. Based on this cooperation, new ideas and projects were developed, i.e. a training concept for surgical trainers including technological competence for surgeons. An adapted innovative paradigm for a cooperating working culture in CAS is based on a shared mental model and common goals from the very beginning of a project. All actors in trans- and inter-disciplinary teams need to be interested in cooperation. This will lead to a common view on patients and technology models. Copyright © 2015 Elsevier B.V. All rights reserved.

Communications Technology and Motor Neuron Disease: An Australian Survey of People With Motor Neuron Disease

PubMed Central

2016-01-01

Background People with Motor Neuron Disease (MND), of which amyotrophic lateral sclerosis (ALS) is the most common form in adults, typically experience difficulties with communication and disabilities associated with movement. Assistive technology is essential to facilitate everyday activities, promote social support and enhance quality of life. Objective This study aimed to explore the types of mainstream and commonly available communication technology used by people with MND including software and hardware, to identify the levels of confidence and skill that people with MND reported in using technology, to determine perceived barriers to the use of technology for communication, and to investigate the willingness of people with MND to adopt alternative modes of communication. Methods An on-line survey was distributed to members of the New South Wales Motor Neuron Disease Association (MND NSW). Descriptive techniques were used to summarize frequencies of responses and cross tabulate data. Free-text responses to survey items and verbal comments from participants who chose to undertake the survey by telephone were analyzed using thematic analysis. Results Responses from 79 MND NSW members indicated that 15-21% had difficulty with speaking, writing and/or using a keyboard. Commonly used devices were desktop computers, laptops, tablets and mobile phones. Most participants (84%) were connected to the Internet and used it for email (91%), to find out more about MND (59%), to follow the news (50%) or for on-line shopping (46%). A third of respondents used Skype or its equivalent, but few used this to interact with health professionals. Conclusions People with MND need greater awareness of technology options to access the most appropriate solutions. The timing for people with MND to make decisions about technology is critical. Health professionals need skills and knowledge about the application of technology to be able to work with people with MND to select the best communication technology options as early as possible after diagnosis. If people with MND are willing to trial telehealth technology, there is potential for tele-consultations via Skype or its equivalent, with health professionals. People with MND can benefit from health professional involvement to match technology to their functional limitations and personal preferences. However, health professionals need a comprehensive understanding of the application of available technology to achieve this. PMID:28582251

PRSEUS Development for the Hybrid Wing Body Aircraft

NASA Technical Reports Server (NTRS)

Velicki, Alex; Jegley, Dawn

2011-01-01

NASA has created the Environmentally Responsible Aviation (ERA) Project to explore and document the feasibility, benefits and technical risk of advanced vehicle configurations and enabling technologies that will reduce the impact of aviation on the environment. A critical aspect of this pursuit is the development of a lighter, more robust airframe that will enable the introduction of unconventional aircraft configurations that have higher lift to drag ratios, reduced drag, and lower community noise. The primary structural concept being developed for the Hybrid Wing Body aircraft design under the ERA project in the Airframe Technology element is the PRSEUS concept. This paper describes how researchers at NASA and Boeing are working together to develop fundamental PRSEUS technologies that could someday be implemented on a transport size HWB airplane design.

Beyond the Baseline 1991: Proceedings of the Space Station Evolution Symposium. Volume 1: Space Station Freedom, part 1

NASA Technical Reports Server (NTRS)

1991-01-01

Personnel responsible for Advanced Systems Studies and Advanced Development within the Space Station Freedom Program reported on the results of their work to date. The results of SSF Advanced Studies provide a road map for the evolution of Freedom in terms of user requirements, utilization and operations concepts, and growth options for distributed systems. Regarding these specific systems, special attention is given to: highlighting changes made during restructuring; description of growth paths thru the follow-on and evolution phases; identification of minimum impact provisions to allow flexibility in the baseline; and identification of enhancing and enabling technologies. Products of these tasks include: engineering fidelity demonstrations and evaluations of advanced technology; detailed requirements, performance specifications, and design accommodations for insertion of advanced technology.

2017 DOE Vehicle Technologies Office Annual Merit Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2017 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 5-9, 2017, in Washington, DC. The review encompassed work done by the Hydrogen and Fuel Cells Program and VTO: 263 individual activities were reviewed for VTO by 191 reviewers. Exactly 1,241 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia to give inputsmore » to DOE with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.« less

2016 DOE Vehicle Technologies Office Annual Merit Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The 2016 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Office (VTO) Annual Merit Review and Peer Evaluation Meeting (AMR) was held June 6-9, 2016, in Washington, DC. The review encompassed work done by the Hydrogen and Fuel Cells Program and VTO: 226 individual activities were reviewed for VTO, by 171 reviewers. A total of 1,044 individual review responses were received for the VTO technical reviews. The objective of the meeting was to review the accomplishments and plans for VTO over the previous 12 months, and provide an opportunity for industry, government, and academia tomore » give inputs to DOE with a structured and formal methodology. The meeting also provided attendees with a forum for interaction and technology information transfer.« less

Fine Collimator Grids Using Silicon Metering Structure

NASA Technical Reports Server (NTRS)

Eberhard, Carol

1998-01-01

The project Fine Collimator Grids Using Silicon Metering Structure was managed by Dr. Carol Eberhard of the Electromagnetic Systems & Technology Department (Space & Technology Division) of TRW who also wrote this final report. The KOH chemical etching of the silicon wafers was primarily done by Dr. Simon Prussin of the Electrical Engineering Department of UCLA at the laboratory on campus. Moshe Sergant of the Superconductor Electronics Technology Department (Electronics Systems & Technology Division) of TRW and Dr. Prussin were instrumental in developing the low temperature silicon etching processes. Moshe Sergant and George G. Pinneo of the Microelectronics Production Department (Electronics Systems & Technology Division) of TRW were instrumental in developing the processes for filling the slots etched in the silicon wafers with metal-filled materials. Their work was carried out in the laboratories at the Space Park facility. Moshe Sergant is also responsible for the impressive array of Scanning Electron Microscope images with which the various processes were monitored. Many others also contributed their time and expertise to the project. I wish to thank them all.

High performance real-time flight simulation at NASA Langley

NASA Technical Reports Server (NTRS)

Cleveland, Jeff I., II

1994-01-01

In order to meet the stringent time-critical requirements for real-time man-in-the-loop flight simulation, computer processing operations must be deterministic and be completed in as short a time as possible. This includes simulation mathematical model computational and data input/output to the simulators. In 1986, in response to increased demands for flight simulation performance, personnel at NASA's Langley Research Center (LaRC), working with the contractor, developed extensions to a standard input/output system to provide for high bandwidth, low latency data acquisition and distribution. The Computer Automated Measurement and Control technology (IEEE standard 595) was extended to meet the performance requirements for real-time simulation. This technology extension increased the effective bandwidth by a factor of ten and increased the performance of modules necessary for simulator communications. This technology is being used by more than 80 leading technological developers in the United States, Canada, and Europe. Included among the commercial applications of this technology are nuclear process control, power grid analysis, process monitoring, real-time simulation, and radar data acquisition. Personnel at LaRC have completed the development of the use of supercomputers for simulation mathematical model computational to support real-time flight simulation. This includes the development of a real-time operating system and the development of specialized software and hardware for the CAMAC simulator network. This work, coupled with the use of an open systems software architecture, has advanced the state of the art in real time flight simulation. The data acquisition technology innovation and experience with recent developments in this technology are described.

Hardware-in-the-Loop Simulation of a Distribution System with Air Conditioners under Model Predictive Control: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sparn, Bethany F; Ruth, Mark F; Krishnamurthy, Dheepak

Many have proposed that responsive load provided by distributed energy resources (DERs) and demand response (DR) are an option to provide flexibility to the grid and especially to distribution feeders. However, because responsive load involves a complex interplay between tariffs and DER and DR technologies, it is challenging to test and evaluate options without negatively impacting customers. This paper describes a hardware-in-the-loop (HIL) simulation system that has been developed to reduce the cost of evaluating the impact of advanced controllers (e.g., model predictive controllers) and technologies (e.g., responsive appliances). The HIL simulation system combines large-scale software simulation with a smallmore » set of representative building equipment hardware. It is used to perform HIL simulation of a distribution feeder and the loads on it under various tariff structures. In the reported HIL simulation, loads include many simulated air conditioners and one physical air conditioner. Independent model predictive controllers manage operations of all air conditioners under a time-of-use tariff. Results from this HIL simulation and a discussion of future development work of the system are presented.« less

DNA in the material world: electrical properties and nano-applications.

PubMed

Triberis, Georgios P; Dimakogianni, Margarita

2009-01-01

Contradictory experimental findings and theoretical interpretations have spurred intense debate over the electrical properties of the DNA double helix. In the present review article the various factors responsible for these divergences are discussed. The enlightenment of this issue could improve long range chemistry of oxidative DNA damage and repair processes, monitoring protein-DNA interactions and possible applications in nano-electronic circuit technology. The update experimental situation concerning measurements of the electrical conductivity is given. The character of the carriers responsible for the electrical conductivity measured in DNA is investigated. A theoretical model for the temperature dependence of the electrical conductivity of DNA is presented, based on microscopic models and percolation theoretical arguments. The theoretical results, excluding or including correlation effects, are applied to recent experimental findings for DNA, considering it as a one dimensional molecular wire. The results indicate that correlation effects are probably responsible for large hopping distances in DNA samples. Other theoretical conductivity models proposed for the interpretation of the responsible transport mechanism are also reviewed. Some of the most known and pioneering works on DNA's nano-applications, future developments and perspectives along with current technological limitations and patents are presented and discussed.

Extended work availability and its relation with start-of-day mood and cortisol.

PubMed

Dettmers, Jan; Vahle-Hinz, Tim; Bamberg, Eva; Friedrich, Niklas; Keller, Monika

2016-01-01

The opportunity to work at any time and place, which is facilitated by mobile communication technologies, reinforces employer expectations that employees are available for work beyond regular work hours. This study investigates the relation of daily extended work availability with psychological and physiological well-being and the mediating role of recovery experiences. We hypothesized that recovery is limited under conditions of extended work availability, which may impair well-being. A sample of 132 individuals from 13 organizations provided daily survey measures over a period of 4 days during which they were required to be available during nonworking hours and 4 days during which they were not required to be available. A subsample of 51 persons provided morning cortisol levels in addition to the survey data. The analysis of within-person processes using multilevel structural equation modeling revealed significant effects of extended work availability on the daily start-of-day mood and cortisol awakening response. Mediation analysis revealed that the recovery experience of control over off-job activities mediated the observed relationship with start-of-day mood but not the relationship with the cortisol awakening response. The results demonstrate that nonwork hours during which employees are required to remain available for work cannot be considered leisure time because employees' control over their activities is constrained and their recovery from work is restricted. (c) 2016 APA, all rights reserved).

Coupled Molecular Switching Processes in Ordered Mono- and Multilayers of Stimulus-Responsive Rotaxanes on Gold Surfaces

PubMed Central

2015-01-01

Interfaces provide the structural basis for function as, for example, encountered in nature in the membrane-embedded photosystem or in technology in solar cells. Synthetic functional multilayers of molecules cooperating in a coupled manner can be fabricated on surfaces through layer-by-layer self-assembly. Ordered arrays of stimulus-responsive rotaxanes undergoing well-controlled axle shuttling are excellent candidates for coupled mechanical motion. Such stimulus-responsive surfaces may help integrate synthetic molecular machines in larger systems exhibiting even macroscopic effects or generating mechanical work from chemical energy through cooperative action. The present work demonstrates the successful deposition of ordered mono- and multilayers of chemically switchable rotaxanes on gold surfaces. Rotaxane mono- and multilayers are shown to reversibly switch in a coupled manner between two ordered states as revealed by linear dichroism effects in angle-resolved NEXAFS spectra. Such a concerted switching process is observed only when the surfaces are well packed, while less densely packed surfaces lacking lateral order do not exhibit such effects. PMID:25782057

Life in the laboratory: public responses to experimental biology.

PubMed

Turney, J

1995-04-01

Present-day public attitudes to biological manipulation are ambivalent, many surveys show. This paper explores evidence of earlier attitudes to experimental biology, before survey data exists, by examining published responses in the press to the idea that biologists would 'create life'. This remarkable claim achieved wide currency in the early years of this century, particularly linked to the work of two prototypical 'visible scientists': Jacques Loeb and Alexis Carrel. Analysis of press responses to accounts of their work reveals deep disquiet about its possible implications, at a time when science and technology in general were regarded very positively. The evidence is augmented by studying commentary on a Presidential Address by Edward Schafer to the British Association meeting of 1912. It is concluded that feelings of ambivalence toward the manipulative power of biology are apparent at a very early stage in the development of modern biology, and that this makes it implausible that more recent manifestations of such ambivalence can be ascribed to some generalized 'anti-science' sentiment which has gathered strength in recent years.

Children linking science and technology in the primary classroom

NASA Astrophysics Data System (ADS)

Jane, Beverley L.

1995-06-01

This research project exemplifies how technology can facilitate scientific investigations. It also highlights how enthusiastic children can be when they are encouraged to pose their own questions and take responsibility for finding the answers. Year 5 children, working in groups, were involved in designing, making and appraising catchers and enclosures used to investigate small animals found within their school's grounds. A videotape of this project was made and should be a valuable resource for the professional development of both trainee and practising teachers. Included in the tape are children's spontaneous comments, their concern for animal welfare, and reflection on the various aspects of their investigations.

Turbine Engine Hot Section Technology 1986

NASA Technical Reports Server (NTRS)

1986-01-01

The Turbine Engine Hot Section Technology (HOST) Project of the NASA Lewis Research Center sponsored a workshop to discuss current research pertinent to turbine engine durability problems. Presentations were made concerning the hot section environment and the behavior of combustion liners, turbine blades, and turbine vanes. The presentations were divided into six sessions: Instrumentation, Combustion, Turbine Heat Transfer, Structural Analysis, Fatigue and Fracture, and Surface Protection. Topics discussed included modeling of thermal and fluid-flow phenomena, structural analysis, fatigue and fracture, surface protective coatings, constitutive behavior of materials, stress-strain response, and life-prediction methods. Researchers from industry, academia, and government presented results of their work sponsored by the HOST project.

THE DOE OFFICE OF ENVIRONMENTAL MANAGEMENT INTERNATIONAL COOPERATIVE PROGRAM: OVERVIEW OF TECHNICAL TASKS AND RESULTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marra, J.; Fox, K.; Farfan, E.

2009-12-08

The DOE Office of Environmental Management (DOE-EM) Office of Engineering and Technology is responsible for implementing EM's International Cooperative Program. Over the past 15 years, collaborative work has been conducted through this program with researchers in Russia, Ukraine, France, United Kingdom and Republic of Korea. Currently, work is being conducted with researchers in Russia and Ukraine. Efforts aimed at evaluating and advancing technologies to support U.S. high-level waste (HLW) vitrification initiatives are being conducted in collaboration with Russian researchers. Work at Khlopin Radium Institute (KRI) is targeted at improving the throughput of current vitrification processes by increasing melting rate. Thesemore » efforts are specifically targeted at challenging waste types identified at the Savannah River Site (SRS) and Hanford Site. The objectives of current efforts at SIA Radon are to gain insight into vitrification process limits for the cold crucible induction melter (CCIM) technology. Previous demonstration testing has shown that the CCIM offers the potential for dramatic increases in waste loading and waste throughput. However, little information is known regarding operational limits that could affect long-term, efficient CCIM operations. Collaborative work with the Russian Electrotechnical University (ETU) 'LETI' is aimed at advancing CCIM process monitoring, process control and design. The goal is to further mature the CCIM technology and to establish it as a viable HLW vitrification technology. The greater than two year effort conducted with the International Radioecology Laboratory in the Ukraine recently completed. The objectives of this study were: to assess the long-term impacts to the environment from radiation exposure in the Chernobyl Exclusion Zone (ChEZ); and to provide information on remediation guidelines and ecological risk assessment within radioactively contaminated territories around the Chernobyl Nuclear Power Plant (ChNPP) based on the results of long-term field monitoring, analytical measurements, and numerical modeling of soils and groundwater radioactive contamination.« less

Preferences for technology versus human assistance and control over technology in the performance of kitchen and personal care tasks in baby boomers and older adults.

PubMed

Beach, Scott R; Schulz, Richard; Matthews, Judith T; Courtney, Karen; Dabbs, Annette DeVito

2014-11-01

Quality of Life technology (QoLT) stresses humans and technology as mutually dependent and aware, working together to improve task performance and quality of life. This study examines preferences for technology versus human assistance and control in the context of QoLT. Data are from a nationally representative, cross-sectional web-based sample of 416 US baby boomers (45-64) and 114 older adults (65+) on preferences for technology versus human assistance and control in the performance of kitchen and personal care tasks. Multinomial logistic regression and ordinary least squares regression were used to determine predictors of these preferences. Respondents were generally accepting of technology assistance but wanted to maintain control over its' operation. Baby boomers were more likely to prefer technology than older adults, and those with fewer QoLT privacy concerns and who thought they were more likely to need future help were more likely to prefer technology over human assistance and more willing to relinquish control to technology. Results suggest the need for design of person- and context-aware QoLT systems that are responsive to user desires for level of control over operation of the technology. The predictors of these preferences suggest potentially receptive markets for the targeting of QoLT systems.

Elsevier’s approach to the bioCADDIE 2016 Dataset Retrieval Challenge

PubMed Central

Scerri, Antony; Kuriakose, John; Deshmane, Amit Ajit; Stanger, Mark; Moore, Rebekah; Naik, Raj; de Waard, Anita

2017-01-01

Abstract We developed a two-stream, Apache Solr-based information retrieval system in response to the bioCADDIE 2016 Dataset Retrieval Challenge. One stream was based on the principle of word embeddings, the other was rooted in ontology based indexing. Despite encountering several issues in the data, the evaluation procedure and the technologies used, the system performed quite well. We provide some pointers towards future work: in particular, we suggest that more work in query expansion could benefit future biomedical search engines. Database URL: https://data.mendeley.com/datasets/zd9dxpyybg/1 PMID:29220454

Human-centered design of a cyber-physical system for advanced response to Ebola (CARE).

PubMed

Dimitrov, Velin; Jagtap, Vinayak; Skorinko, Jeanine; Chernova, Sonia; Gennert, Michael; Padir, Taşkin

2015-01-01

We describe the process towards the design of a safe, reliable, and intuitive emergency treatment unit to facilitate a higher degree of safety and situational awareness for medical staff, leading to an increased level of patient care during an epidemic outbreak in an unprepared, underdeveloped, or disaster stricken area. We start with a human-centered design process to understand the design challenge of working with Ebola treatment units in Western Africa in the latest Ebola outbreak, and show preliminary work towards cyber-physical technologies applicable to potentially helping during the next outbreak.

Requirements for conformal coating and staking of printed wiring boards and electronic assemblies

NASA Technical Reports Server (NTRS)

1985-01-01

In order to maintain the high standards of the NASA conformal coating and staking program, this publication: prescribes NASA's requirements for assuring reliable conformal coating and staking for printed wiring boards and electronic assemblies; describes and incorporates basic considerations necessary to assure reliable conformal coating and staking; establishes the supplier's responsibility to train and certify personnel; provides for supplier documentation of the fabrication and inspection procedures to be used for NASA work, including supplier innovations and changes in technology; and provides visual workmanship standards to aid those responsible for determining quality conformance to the established requirements.

Networking Omic Data to Envisage Systems Biological Regulation.

PubMed

Kalapanulak, Saowalak; Saithong, Treenut; Thammarongtham, Chinae

To understand how biological processes work, it is necessary to explore the systematic regulation governing the behaviour of the processes. Not only driving the normal behavior of organisms, the systematic regulation evidently underlies the temporal responses to surrounding environments (dynamics) and long-term phenotypic adaptation (evolution). The systematic regulation is, in effect, formulated from the regulatory components which collaboratively work together as a network. In the drive to decipher such a code of lives, a spectrum of technologies has continuously been developed in the post-genomic era. With current advances, high-throughput sequencing technologies are tremendously powerful for facilitating genomics and systems biology studies in the attempt to understand system regulation inside the cells. The ability to explore relevant regulatory components which infer transcriptional and signaling regulation, driving core cellular processes, is thus enhanced. This chapter reviews high-throughput sequencing technologies, including second and third generation sequencing technologies, which support the investigation of genomics and transcriptomics data. Utilization of this high-throughput data to form the virtual network of systems regulation is explained, particularly transcriptional regulatory networks. Analysis of the resulting regulatory networks could lead to an understanding of cellular systems regulation at the mechanistic and dynamics levels. The great contribution of the biological networking approach to envisage systems regulation is finally demonstrated by a broad range of examples.

Molecular Signatures of Immunity and Immunogenicity in Infection and Vaccination

PubMed Central

Haks, Mariëlle C.; Bottazzi, Barbara; Cecchinato, Valentina; De Gregorio, Corinne; Del Giudice, Giuseppe; Kaufmann, Stefan H. E.; Lanzavecchia, Antonio; Lewis, David J. M.; Maertzdorf, Jeroen; Mantovani, Alberto; Sallusto, Federica; Sironi, Marina; Uguccioni, Mariagrazia; Ottenhoff, Tom H. M.

2017-01-01

Vaccinology aims to understand what factors drive vaccine-induced immunity and protection. For many vaccines, however, the mechanisms underlying immunity and protection remain incompletely characterized at best, and except for neutralizing antibodies induced by viral vaccines, few correlates of protection exist. Recent omics and systems biology big data platforms have yielded valuable insights in these areas, particularly for viral vaccines, but in the case of more complex vaccines against bacterial infectious diseases, understanding is fragmented and limited. To fill this gap, the EC supported ADITEC project (http://www.aditecproject.eu/; http://stm.sciencemag.org/content/4/128/128cm4.full) featured a work package on “Molecular signatures of immunity and immunogenicity,” aimed to identify key molecular mechanisms of innate and adaptive immunity during effector and memory stages of immune responses following vaccination. Specifically, technologies were developed to assess the human immune response to vaccination and infection at the level of the transcriptomic and proteomic response, T-cell and B-cell memory formation, cellular trafficking, and key molecular pathways of innate immunity, with emphasis on underlying mechanisms of protective immunity. This work intersected with other efforts in the ADITEC project. This review summarizes the main achievements of the work package. PMID:29204145

The impact of technology on the enactment of inquiry in a technology enthusiast's sixth grade science classroom

NASA Astrophysics Data System (ADS)

Waight, Noemi; Abd-El-Khalick, Fouad

2007-01-01

This study investigated the impact of the use of computer technology on the enactment of inquiry in a sixth grade science classroom. Participants were 42 students (38% female) enrolled in two sections of the classroom and taught by a technology-enthusiast instructor. Data were collected over the course of 4 months during which several inquiry activities were completed, some of which were supported with the use of technology. Non-participant observation, classroom videotaping, and semi-structured and critical-incident interviews were used to collect data. The results indicated that the technology in use worked to restrict rather than promote inquiry in the participant classroom. In the presence of computers, group activities became more structured with a focus on sharing tasks and accounting for individual responsibility, and less time was dedicated to group discourse with a marked decrease in critical, meaning-making discourse. The views and beliefs of teachers and students in relation to their specific contexts moderate the potential of technology in supporting inquiry teaching and learning and should be factored both in teacher training and attempts to integrate technology in science teaching.

Ethics in pharmacy: a new definition of responsibility.

PubMed

Dessing, Rudolf P; Flameling, Jan

2003-02-01

Ethics and responsibility are expressions that should characterize professional practice in many sectors of society. Pharmacy, being a high technology activity, is just an example of a field where (responsible) decisions about medicines and health care are closely connected to private and public life. Responsible behavior can only be demonstrated when the moral basis, the values on which decisions are taken, is clear and accepted by society as a whole. The basis for responsible action in medicine is still considered to connect with the Hippocratic Oath. But this code has no clear philosophical basis, other than the fact that it was recognized by the inner circle of physicians. Modern dilemmas like the role of technology, public costs, the definition of life, genetic engineering and assisted suicide ask for an approach that is rational, based on philosophical ideas and understandable and accepted by the public. From the work of 20th century philosophers like Rawls, Nussbaum and Sen, essential values can be abstracted, which apply to health and health care. Although the plurality of human beings makes it complicated to translate such values into general rules of conduct, this article presents a model for responsible behavior, based on these values. It appears that responsibility includes the obligation to interact with a patient to an extent in which the values of self-determination, compassion and justice have real significance for the parties involved. This responsibility calls for ('Aristotelian') experience and practical wisdom and should be recognizable through guidelines and legislation.

Intelligent Engine Systems Work Element 1.2: Malfunction and Operator Error Reduction

NASA Technical Reports Server (NTRS)

Wiseman, Matthew

2005-01-01

Jet engines, although highly reliable and safe, do experience malfunctions that cause flight delays, passenger stress, and in some cases, in conjunction with inappropriate crew response, contribute to airplane accidents. On rare occasions, the anomalous engine behavior is not recognized until it is too late for the pilots to do anything to prevent or mitigate the resulting engine malfunction causing in-flight shutdowns (IFSDs), aborted takeoffs (ATOs), or loss of thrust control (LOTC). In some cases, the crew response to a myriad of external stimuli and existing training procedures is the source of the problem mentioned above. The problem is the reduction of jet engine malfunctions (IFSDs, ATOs, and LOTC) and inappropriate crew response (PSM+ICR) through the use of evolving and advanced technologies. The solution is to develop the overall system health maintenance architecture, detection and accommodation technologies, processes, and enhanced crew interfaces that would enable a significant reduction in IFSDs, ATOs, and LOTC. This program defines requirements and proposes a preliminary design concept of an architecture that enables the realization of the solution.

The futures of climate engineering

NASA Astrophysics Data System (ADS)

Low, Sean

2017-01-01

This piece examines the need to interrogate the role of the conceptions of the future, as embedded in academic papers, policy documents, climate models, and other artifacts that serve as currencies of the science-society interface, in shaping scientific and policy agendas in climate engineering. Growing bodies of work on framings, metaphors, and models in the past decade serve as valuable starting points, but can benefit from integration with science and technology studies work on the sociology of expectations, imaginaries, and visions. Potentially valuable branches of work to come might be the anticipatory use of the future: the design of experimental spaces for exploring the future of an engineered climate in service of responsible research and innovation, and the integration of this work within the unfolding context of the Paris Agreement.

Mobil lube dewaxing technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baker, C.L.; McGuiness, M.P.

1995-09-01

Currently, the lube refining industry is in a period of transition, with both hydroprocessing and catalytic dewaxing gathering momentum as replacements for solvent extraction and solvent dewaxing. In addition, lube product quality requirements have been increasing, both in the US and abroad. Mobil has developed a broad array of dewaxing catalytic technologies which can serve refiners throughout the stages of this transition. In the future, lube feedstocks which vary in source and wax content will become increasingly important, requiring an optimized system for highest performance. The Mobil Lube Dewaxing (MLDW) process is the work-horse of the catalytic dewaxing technologies, beingmore » a robust, low cost technology suitable for both solvent extracted and hydrocracked feeds. The Mobil Selective Dewaxing (MSDW) process has been recently introduced in response to the growth of hydroprocessing. MSDW requires either severely hydrotreated or hydrocracked feeds and provides improved lube yields and VI. For refiners with hydrocrackers and solvent dewaxing units, Mobil Wax Isomerization (MWI) technology can make higher VI base stocks to meet the growing demand for very high quality lube products. A review of these three technologies is presented in this paper.« less

Virtual Airport Simulation Technology: Perceptions of Airport Operations Initial Training Program Variables and Effectiveness for Airside Professional Competence

ERIC Educational Resources Information Center

DeCarlo, Jeffrey

2010-01-01

Air travel is expected to grow by a factor of 2 to 3 times by 2025 and people working in the aviation system, including airport personnel, pilots, and air traffic controllers, must be able to safely and efficiently operate in this arena ("NextGen"). In response to the personnel training and education requirements concomitant with "NextGen,"…

Leading Millennials Motivating And Leading Millennial Service Members

DTIC Science & Technology

2016-02-20

socially responsible, this cohort ushered in the era of the two-income household with both parents working full-time. In addition, this generation was...upbringing was very different from the hands-off method experienced by Generation X. Instead, parents of Millennials took a child-centric approach to...single or divorced parents . They are more independent than their counterparts and learned to entertain themselves by using technology. A second

Sensitive Infrared Photodetectors: Optimized Electron Kinetics for Room-Temperature Operation

DTIC Science & Technology

2010-12-20

QD levels; (iii) High photoconductive gain and responsivity; (iv) Low generation-recombination noise due to the long photoelectron lifetime. The...etc. [1-6]. For example, quantum-well infrared photodetectors ( QWIPs ) is currently a well-established technology, which is widely employed in...various imaging devices working at liquid nitrogen temperatures and below [7,8]. At 77K, modern QWIPs operating around λ = 10 μm demonstrate the

Oil and Hazardous Materials Spill Response Technology Development, Strategic Plan

DTIC Science & Technology

2012-05-01

the pollutant can be recovered, burned, or dispersed . Objectives:  Develop the means to divert and contain sinking and suspended oils in order to...Research and Development Center 1 Chelsea Street New London, CT 06320 10. Work Unit No. (TRAIS) 11. Contract or Grant No. 12...similar analysis of prevention efforts should be carried out in the future. 17. Key Words oil, hazardous material, oil spill, pollution

Fiscal Year 2014 United States Army Corps of Engineers -Civil Works Annual Financial Report: Maintaining Readiness Through Fiscal Responsibility

DTIC Science & Technology

2014-01-01

modify previously authorized but unconstructed projects as needed to meet current science and engineering standards. Based on these completed...Everglades Planning Project feasibility report, which incorporates updated science and technical information gained over the last decade, was completed...report of the President’s Council of Advisors on Science and Technology on Sustaining Environmental Capital, recently formed a Biodiversity and Ecosystem

Low NOx Fuel Flexible Combustor Integration Project Overview

NASA Technical Reports Server (NTRS)

Walton, Joanne C.; Chang, Clarence T.; Lee, Chi-Ming; Kramer, Stephen

2015-01-01

The Integrated Technology Demonstration (ITD) 40A Low NOx Fuel Flexible Combustor Integration development is being conducted as part of the NASA Environmentally Responsible Aviation (ERA) Project. Phase 2 of this effort began in 2012 and will end in 2015. This document describes the ERA goals, how the fuel flexible combustor integration development fulfills the ERA combustor goals, and outlines the work to be conducted during project execution.

Multi-Objective Optimization of System Capability Satisficing in Defense Acquisition

DTIC Science & Technology

2012-01-01

of System Capability Satisficing in Defense Acquisition 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Stevens Institute of Technology,School of Systems...Report (SAR) 18. NUMBER OF PAGES 27 19a. NAME OF RESPONSIBLE PERSON a. REPORT unclassified b. ABSTRACT

Development of Medical Technology for Contingency Response to Marrow Toxic Agents

DTIC Science & Technology

2014-07-25

Research in Transplantation : Create a platform that facilitates multicenter collaboration and data management. 15. SUBJECT TERMS Research in HLA ...Confirmatory Testing OTTR Organ Transplant Tracking Record CTA Clinical Trial Application P2P Peer-to-Peer PBMC Peripheral Blood Mononuclear Cells...NUMBER Project 1, 2, 3, 4 5f. WORK UNIT NUMBER N/A 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) National Marrow Donor Program 3001

Novel highly dispersible, thermally stable core/shell proppants for geothermal applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Childers, Ian M.; Endres, Mackenzie; Burns, Carolyne

The use of proppants during reservoir stimulation in tight oil and gas plays requires the introduction of highly viscous fluids to transport the proppants (µm–mm) with the fracturing fluid. The highly viscous fluids required result in increased pump loads and energy costs. Furthermore, although proppant deployment with fracturing fluids is a standard practice for unconventional oil and gas stimulation operations, there are only a few examples in the US of the applying proppant technology to geothermal energy production. This is due to proppant dissolution, proppant flowback and loss of permeability associated with the extreme temperatures found in enhanced geothermal systemsmore » (EGS). This work demonstrates proof-of-concept of a novel, CO2-responsive, lightweight sintered-bauxite/polymer core/shell proppant. The polymer shell has two main roles; 1) increase the stability of the proppant dispersion in water without the addition of rheology modifiers, and 2) once at the fracture network react with CO2 to promote particle aggregation and prop fractures open. In this work, both of these roles are demonstrated together with the thermal and chemical stability of the materials showing the potential of these CO2-responsive proppants as an alternative proppant technology for geothermal and unconventional oil/gas applications.« less

Agricultural Intensification as a Mechanism of Adaptation to Climate Change Impacts

NASA Astrophysics Data System (ADS)

Kyle, P.; Calvin, K. V.; le Page, Y.; Patel, P.; West, T. O.; Wise, M. A.

2015-12-01

The research, policy, and NGO communities have devoted significant attention to the potential for agricultural intensification, or closure of "yield gaps," to alleviate future global hunger, poverty, climate change impacts, and other threats. However, because the research to this point has focused on biophysically attainable yields—assuming optimal choices under ideal conditions—the presently available work has not yet addressed the likely responses of the agricultural sector to real-world conditions in the future. This study investigates endogenous agricultural intensification in response to global climate change impacts—that is, intensification independent of policies or other exogenous interventions to promote yield gap closure. The framework for the analysis is a set of scenarios to 2100 in the GCAM global integrated assessment model, enhanced to include endogenous irrigation, fertilizer application, and yields, in each of 283 land use regions, with maximum yields based on the 95th percentile of attainable yields in a recent global assessment. We assess three levels of agricultural climate impacts, using recent global gridded crop model datasets: none, low (LPJmL), and high (Pegasus). Applying formulations for decomposition of climate change impacts response developed in prior AgMIP work, we find that at the global level, availability of high-yielding technologies mitigates price shocks and shifts the agricultural sector's climate response modestly towards intensification, away from cropland expansion and reduced production. At the regional level, the behavior is more complex; nevertheless, availability of high-yielding production technologies enhances the inter-regional shifts in agricultural production that are induced by climate change, complemented by commensurate changes in trade patterns. The results highlight the importance of policies to facilitate yield gap closure and inter-regional trade as mechanisms for adapting to climate change

Contributions for the next generation of 3D metal printing machines

NASA Astrophysics Data System (ADS)

Pereira, M.; Thombansen, U.

2015-03-01

The 3D metal printing processes are key technologies for the new industry manufacturing requirements, as small lot production associated with high design complexity and high flexibility are needed towards personalization and customization. The main challenges for these processes are associated to increasing printing volumes, maintaining the relative accuracy level and reducing the global manufacturing time. Through a review on current technologies and solutions proposed by global patents new design solutions for 3D metal printing machines can be suggested. This paper picks up current technologies and trends in SLM and suggests some design approaches to overcome these challenges. As the SLM process is based on laser scanning, an increase in printing volume requires moving the scanner over the work surface by motion systems if printing accuracy has to be kept constant. This approach however does not contribute to a reduction in manufacturing time, as only one laser source will be responsible for building the entire work piece. With given technology limits in galvo based laser scanning systems, the most obvious solution consists in using multiple beam delivery systems in series, in parallel or both. Another concern is related to the weight of large work pieces. A new powder recoater can control the layer thickness and uniformity and eliminate or diminish fumes. To improve global accuracy, the use of a pair of high frequency piezoelectric actuators can help in positioning the laser beam. The implementation of such suggestions can contribute to SLM productivity. To do this, several research activities need to be accomplished in areas related to design, control, software and process fundamentals.

UK medicines regulation: responding to current challenges

PubMed Central

Richards, Natalie

2016-01-01

The medicines regulatory environment is evolving rapidly in response to the changing environment. Advances in science and technology have led to a vast field of increasingly complicated pharmaceutical and medical device products; increasing globalization of the pharmaceutical industry, advances in digital technology and the internet, changing patient populations, and shifts in society also affect the regulatory environment. In the UK, the Medicines and Healthcare products Regulatory Agency (MHRA) regulates medicines, medical devices and blood products to protect and improve public health, and supports innovation through scientific research and development. It works closely with other bodies in a single medicines network across Europe and takes forward UK health priorities. This paper discusses the range of initiatives in the UK and across Europe to support innovation in medicines regulation. The MHRA leads a number of initiatives, such as the Innovation Office, which helps innovators to navigate the regulatory processes to progress their products or technologies; and simplification of the Clinical Trials Regulations and the Early Access to Medicines Scheme, to bring innovative medicines to patients faster. The Accelerated Access Review will identify reforms to accelerate access for National Health Service patients to innovative medicines and medical technologies. PRIME and Adaptive Pathways initiatives are joint endeavours within the European regulatory community. The MHRA runs spontaneous reporting schemes and works with INTERPOL to tackle counterfeiting and substandard products sold via the internet. The role of the regulator is changing rapidly, with new risk‐proportionate, flexible approaches being introduced. International collaboration is a key element of the work of regulators, and is set to expand. PMID:27580254

UK medicines regulation: responding to current challenges.

PubMed

Richards, Natalie; Hudson, Ian

2016-12-01

The medicines regulatory environment is evolving rapidly in response to the changing environment. Advances in science and technology have led to a vast field of increasingly complicated pharmaceutical and medical device products; increasing globalization of the pharmaceutical industry, advances in digital technology and the internet, changing patient populations, and shifts in society also affect the regulatory environment. In the UK, the Medicines and Healthcare products Regulatory Agency (MHRA) regulates medicines, medical devices and blood products to protect and improve public health, and supports innovation through scientific research and development. It works closely with other bodies in a single medicines network across Europe and takes forward UK health priorities. This paper discusses the range of initiatives in the UK and across Europe to support innovation in medicines regulation. The MHRA leads a number of initiatives, such as the Innovation Office, which helps innovators to navigate the regulatory processes to progress their products or technologies; and simplification of the Clinical Trials Regulations and the Early Access to Medicines Scheme, to bring innovative medicines to patients faster. The Accelerated Access Review will identify reforms to accelerate access for National Health Service patients to innovative medicines and medical technologies. PRIME and Adaptive Pathways initiatives are joint endeavours within the European regulatory community. The MHRA runs spontaneous reporting schemes and works with INTERPOL to tackle counterfeiting and substandard products sold via the internet. The role of the regulator is changing rapidly, with new risk-proportionate, flexible approaches being introduced. International collaboration is a key element of the work of regulators, and is set to expand. © 2016 The British Pharmacological Society.

Two Persons with Multiple Disabilities Use Camera-Based Microswitch Technology to Control Stimulation with Small Mouth and Eyelid Responses

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Bellini, Domenico; Oliva, Doretta; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Lang, Russell

2012-01-01

Background: A camera-based microswitch technology was recently developed to monitor small facial responses of persons with multiple disabilities and allow those responses to control environmental stimulation. This study assessed such a technology with 2 new participants using slight variations of previous responses. Method: The technology involved…

Transformative Learning: Patterns of Psychophysiologic Response and Technology-Enabled Learning and Intervention Systems

DTIC Science & Technology

2008-09-01

Psychophysiologic Response and Technology -Enabled Learning and Intervention Systems PRINCIPAL INVESTIGATOR: Leigh W. Jerome, Ph.D...NUMBER Transformative Learning : Patterns of Psychophysiologic Response and Technology - Enabled Learning and Intervention Systems 5b. GRANT NUMBER...project entitled “Transformative Learning : Patterns of Psychophysiologic Response in Technology Enabled Learning and Intervention Systems.” The

Application of Deterministic and Probabilistic System Design Methods and Enhancements of Conceptual Design Tools for ERA Project

NASA Technical Reports Server (NTRS)

Mavris, Dimitri N.; Schutte, Jeff S.

2016-01-01

This report documents work done by the Aerospace Systems Design Lab (ASDL) at the Georgia Institute of Technology, Daniel Guggenheim School of Aerospace Engineering for the National Aeronautics and Space Administration, Aeronautics Research Mission Directorate, Integrated System Research Program, Environmentally Responsible Aviation (ERA) Project. This report was prepared under contract NNL12AA12C, "Application of Deterministic and Probabilistic System Design Methods and Enhancement of Conceptual Design Tools for ERA Project". The research within this report addressed the Environmentally Responsible Aviation (ERA) project goal stated in the NRA solicitation "to advance vehicle concepts and technologies that can simultaneously reduce fuel burn, noise, and emissions." To identify technology and vehicle solutions that simultaneously meet these three metrics requires the use of system-level analysis with the appropriate level of fidelity to quantify feasibility, benefits and degradations, and associated risk. In order to perform the system level analysis, the Environmental Design Space (EDS) [Kirby 2008, Schutte 2012a] environment developed by ASDL was used to model both conventional and unconventional configurations as well as to assess technologies from the ERA and N+2 timeframe portfolios. A well-established system design approach was used to perform aircraft conceptual design studies, including technology trade studies to identify technology portfolios capable of accomplishing the ERA project goal and to obtain accurate tradeoffs between performance, noise, and emissions. The ERA goal, shown in Figure 1, is to simultaneously achieve the N+2 benefits of a cumulative noise margin of 42 EPNdB relative to stage 4, a 75 percent reduction in LTO NOx emissions relative to CAEP 6 and a 50 percent reduction in fuel burn relative to the 2005 best in class aircraft. There were 5 research task associated with this research: 1) identify technology collectors, 2) model technology collectors in EDS, 3) model and assess ERA technologies, 4) LTO and cruise emission prediction, and 5) probabilistic analysis of technology collectors and portfolios.

Managing for Successful Control of Naturally Occurring Asbestos During Large Scale Grading

NASA Astrophysics Data System (ADS)

Saur, R.; Harnish, D.; Cavanaugh, J.; Kendall, K.; Virdee, A.; Ludlam, D.

2012-12-01

Pacific Gas and Electric Company recently completed environmental remediation and civil grading of a 35-acre site in San Francisco Bay Area, and the project became recognized with local agencies as having excellent controls systems for naturally-occurring asbestos (NOA). The project began in 2010 and was completed in 2012, and involved excavating and grading over 100,000 tons of soil containing NOA. The work was subject to requirements by state, local and regional agencies, including an asbestos dust mitigation plan for the Bay Area Air Quality Management District. Effective control of NOA is attributed to management approaches combined with effective monitoring and state-of-the-art controls. Management Planning. The contract for construction specified NOA compliance management and controls, including having a NOA-control "czar" ultimately responsible for effective mitigation. An important element was daily pre-planning for excavation/grading that involved both the NOA mitigation experts and construction staff. Personnel Planning and Training. All construction personnel were trained before work regarding NOA hazards and mitigations. Daily tailboards with all construction personnel included discussions of the NOA controls integral to the daily work. Supervision. A NOA mitigation compliance leader was assigned to each excavation operation, responsible for continuously monitoring wind direction and work to ensure mitigation met requirements, and that disturbed areas were hydrosealed or covered. Adaptive Management - Daily and weekly debriefs occurred with those responsible for NOA controls to evaluate effectiveness, and identify improvements needed. If a monitoring result exceeded the project trigger level, work shut down and a root-cause analysis was performed to determine appropriate corrective actions. Deviations of results from background were researched as to cause, and any adjustments identified. Nearby non-project activities were monitored, as they occasionally caused trigger level exceedences in perimeter monitors, including from off-site vehicles, nearby construction, and mechanical vegetation management (e.g. weed whacking). Regulatory and Owner Oversight. Monitoring results were reported daily to agencies, agencies made frequent inspections, and owner's independent compliance representatives observed the NOA mitigation and provided real-time feedback to the construction team. NOA Controls. NOA emissions were controlled site-wide and for each work activity. Site systems included misting, water trucks on roads, temporary covers and soil sealants. Work activity controls for excavation/grading included both source and perimeter controls. Water application technologies specially designed for NOA fiber mitigation, and not just dust mitigation, were effective without adding excessive water to work areas. These activities collectively created a management structure that facilitated successful implementation of NOA control technologies.

Communications Technology and Motor Neuron Disease: An Australian Survey of People With Motor Neuron Disease.

PubMed

Mackenzie, Lynette; Bhuta, Prarthna; Rusten, Kim; Devine, Janet; Love, Anna; Waterson, Penny

2016-01-25

People with Motor Neuron Disease (MND), of which amyotrophic lateral sclerosis (ALS) is the most common form in adults, typically experience difficulties with communication and disabilities associated with movement. Assistive technology is essential to facilitate everyday activities, promote social support and enhance quality of life. This study aimed to explore the types of mainstream and commonly available communication technology used by people with MND including software and hardware, to identify the levels of confidence and skill that people with MND reported in using technology, to determine perceived barriers to the use of technology for communication, and to investigate the willingness of people with MND to adopt alternative modes of communication. An on-line survey was distributed to members of the New South Wales Motor Neuron Disease Association (MND NSW). Descriptive techniques were used to summarize frequencies of responses and cross tabulate data. Free-text responses to survey items and verbal comments from participants who chose to undertake the survey by telephone were analyzed using thematic analysis. Responses from 79 MND NSW members indicated that 15-21% had difficulty with speaking, writing and/or using a keyboard. Commonly used devices were desktop computers, laptops, tablets and mobile phones. Most participants (84%) were connected to the Internet and used it for email (91%), to find out more about MND (59%), to follow the news (50%) or for on-line shopping (46%). A third of respondents used Skype or its equivalent, but few used this to interact with health professionals. People with MND need greater awareness of technology options to access the most appropriate solutions. The timing for people with MND to make decisions about technology is critical. Health professionals need skills and knowledge about the application of technology to be able to work with people with MND to select the best communication technology options as early as possible after diagnosis. If people with MND are willing to trial telehealth technology, there is potential for tele-consultations via Skype or its equivalent, with health professionals. People with MND can benefit from health professional involvement to match technology to their functional limitations and personal preferences. However, health professionals need a comprehensive understanding of the application of available technology to achieve this. ©Lynette Mackenzie, Prarthna Bhuta, Kim Rusten, Janet Devine, Anna Love, Penny Waterson. Originally published in JMIR Rehabilitation and Assistive Technology (http://rehab.jmir.org), 25.01.2016.

Soft-Fault Detection Technologies Developed for Electrical Power Systems

NASA Technical Reports Server (NTRS)

Button, Robert M.

2004-01-01

The NASA Glenn Research Center, partner universities, and defense contractors are working to develop intelligent power management and distribution (PMAD) technologies for future spacecraft and launch vehicles. The goals are to provide higher performance (efficiency, transient response, and stability), higher fault tolerance, and higher reliability through the application of digital control and communication technologies. It is also expected that these technologies will eventually reduce the design, development, manufacturing, and integration costs for large, electrical power systems for space vehicles. The main focus of this research has been to incorporate digital control, communications, and intelligent algorithms into power electronic devices such as direct-current to direct-current (dc-dc) converters and protective switchgear. These technologies, in turn, will enable revolutionary changes in the way electrical power systems are designed, developed, configured, and integrated in aerospace vehicles and satellites. Initial successes in integrating modern, digital controllers have proven that transient response performance can be improved using advanced nonlinear control algorithms. One technology being developed includes the detection of "soft faults," those not typically covered by current systems in use today. Soft faults include arcing faults, corona discharge faults, and undetected leakage currents. Using digital control and advanced signal analysis algorithms, we have shown that it is possible to reliably detect arcing faults in high-voltage dc power distribution systems (see the preceding photograph). Another research effort has shown that low-level leakage faults and cable degradation can be detected by analyzing power system parameters over time. This additional fault detection capability will result in higher reliability for long-lived power systems such as reusable launch vehicles and space exploration missions.

Robust Online Monitoring for Calibration Assessment of Transmitters and Instrumentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramuhalli, Pradeep; Coble, Jamie B.; Shumaker, Brent

Robust online monitoring (OLM) technologies are expected to enable the extension or elimination of periodic sensor calibration intervals in operating and new reactors. These advances in OLM technologies will improve the safety and reliability of current and planned nuclear power systems through improved accuracy and increased reliability of sensors used to monitor key parameters. In this article, we discuss an overview of research being performed within the Nuclear Energy Enabling Technologies (NEET)/Advanced Sensors and Instrumentation (ASI) program, for the development of OLM algorithms to use sensor outputs and, in combination with other available information, 1) determine whether one or moremore » sensors are out of calibration or failing and 2) replace a failing sensor with reliable, accurate sensor outputs. Algorithm development is focused on the following OLM functions: • Signal validation • Virtual sensing • Sensor response-time assessment These algorithms incorporate, at their base, a Gaussian Process-based uncertainty quantification (UQ) method. Various plant models (using kernel regression, GP, or hierarchical models) may be used to predict sensor responses under various plant conditions. These predicted responses can then be applied in fault detection (sensor output and response time) and in computing the correct value (virtual sensing) of a failing physical sensor. The methods being evaluated in this work can compute confidence levels along with the predicted sensor responses, and as a result, may have the potential for compensating for sensor drift in real-time (online recalibration). Evaluation was conducted using data from multiple sources (laboratory flow loops and plant data). Ongoing research in this project is focused on further evaluation of the algorithms, optimization for accuracy and computational efficiency, and integration into a suite of tools for robust OLM that are applicable to monitoring sensor calibration state in nuclear power plants.« less

Job-related motivational factors among Malaysian employees.

PubMed

Manshor, Amat Taap; Abdullah, Adilah

2002-12-01

This study identified job-related motivational factors among Malaysian employees in several telecommunication companies. Responses were obtained from 1,179 employees at all levels up to senior managers and six different functional divisions, sales and marketing, human resources, finance, technical, information, technology, and support division. All employees were asked to rate the importance of Kovach's 10 job-motivational factors. These factors were good wages, job security, opportunity for career growth in the organization, good working conditions, interesting work, company loyalty to employees, tactful discipline, full appreciation of work done, sympathetic help with personal problems, and feeling of being involved in the organization. The top five factors employees identified as motivating them in their jobs were good wages, job security, company loyalty to employees, good working conditions, and full appreciation for work done. Findings were in accordance with Kovach for U.S. employees, in which the top motivational factors were good wages and job security.

Activist engineering: changing engineering practice by deploying praxis.

PubMed

Karwat, Darshan M A; Eagle, Walter E; Wooldridge, Margaret S; Princen, Thomas E

2015-02-01

In this paper, we reflect on current notions of engineering practice by examining some of the motives for engineered solutions to the problem of climate change. We draw on fields such as science and technology studies, the philosophy of technology, and environmental ethics to highlight how dominant notions of apoliticism and ahistoricity are ingrained in contemporary engineering practice. We argue that a solely technological response to climate change does not question the social, political, and cultural tenet of infinite material growth, one of the root causes of climate change. In response to the contemporary engineering practice, we define an activist engineer as someone who not only can provide specific engineered solutions, but who also steps back from their work and tackles the question, What is the real problem and does this problem "require" an engineering intervention? Solving complex problems like climate change requires radical cultural change, and a significant obstacle is educating engineers about how to conceive of and create "authentic alternatives," that is, solutions that differ from the paradigm of "technologically improving" our way out of problems. As a means to realize radically new solutions, we investigate how engineers might (re)deploy the concept of praxis, which raises awareness in engineers of the inherent politics of technological design. Praxis empowers engineers with a more comprehensive understanding of problems, and thus transforms technologies, when appropriate, into more socially just and ecologically sensitive interventions. Most importantly, praxis also raises a radical alternative rarely considered-not "engineering a solution." Activist engineering offers a contrasting method to contemporary engineering practice and leads toward social justice and ecological protection through problem solving by asking not, How will we technologize our way out of the problems we face? but instead, What really needs to be done?

An Assessment of Pathology Resident Access to and Use of Technology: A Nationwide Survey.

PubMed

Vallangeon, Bethany D; Hawley, Jeffrey S; Sloane, Richard; Bean, Sarah M

2017-03-01

- Current technologies including digital slide scanners and handheld devices can revolutionize clinical practice and pathology graduate medical education (GME). The extent to which these technologies are used in pathology GME is unknown. - To determine the types of technologies used, usage amount, and how they are integrated into pathology residency/fellowship programs nationwide. - A 40-question online survey for residents/fellows was developed and administered via the Research Electronic Data Capture System after institutional review board approval. - Fifty-two program directors (37%) gave permission for participation. One-hundred seventy-one responses were received (18% response rate). Most respondents have access to personal technology (laptop = 78% [134 of 171]), smartphone = 81% [139 of 171], tablet = 49% [84 of 171]), and Web-based digital slide collections (82%, 141 of 171). Few residents are provided electronic devices by their programs (laptop = 22% [38 of 171], smartphone = 0.5% [1 of 171], and tablet = 12% [21 of 171]). Fifty-nine percent have access to digital slide scanners, 33% have access to a program-created database of digitized slides, and 52% use telepathology. Fifteen percent have access to asynchronous learning. Of those with access to video-recorded conferences, 89% review them. Program size was significantly positively correlated with resident access to program-provided laptops (P = .02) and tablets (P < .001), digital slide scanners (P = .01), and telepathology (P = .001). Of all devices, program-provided laptops are used most for professional work (60.5% use this device for more than 5 hours per day). - Most residents report access to multiple types of innovative technology, but incorporation of these tools within pathology training programs is highly variable. Opportunities for incorporating innovative technologies exist and could be further explored.

Remote activation of a microactuator using a photo-responsive nanoparticle-polymer composite

NASA Astrophysics Data System (ADS)

Zeberoff, Anthony

Stimulus response materials are a class of novel materials that are currently being explored in various technologies, including biomedical devices and components, food packaging, fabrics, energy harvesting and conversion, and other elementary components such as sensors and actuators. Hybrid organic-inorganic materials such as nanoparticle-polymer composites are attractive candidates as their properties can be significantly tuned for particular applications where selectivity and localized responses are critical factors. In this work we developed and optimized a photo-responsive microactuator that can operate selectively to a specific wavelength of light. The photo-responsive microactuator is comprised of monodispersed microspheres that contain gold nanoparticles. Upon irradiation, these microspheres transduce optical energy to thermal energy, driving a localized phase change in the matrix in which they are embedded. Our remotely powered microactuator can be further realized in applications where decoupling the physical connection of the energy/control source from the actuating component is necessary.

Using the dynamic bond to access macroscopically responsive structurally dynamic polymers

NASA Astrophysics Data System (ADS)

Wojtecki, Rudy J.; Meador, Michael A.; Rowan, Stuart J.

2011-01-01

New materials that have the ability to reversibly adapt to their environment and possess a wide range of responses ranging from self-healing to mechanical work are continually emerging. These adaptive systems have the potential to revolutionize technologies such as sensors and actuators, as well as numerous biomedical applications. We will describe the emergence of a new trend in the design of adaptive materials that involves the use of reversible chemistry (both non-covalent and covalent) to programme a response that originates at the most fundamental (molecular) level. Materials that make use of this approach - structurally dynamic polymers - produce macroscopic responses from a change in the material's molecular architecture (that is, the rearrangement or reorganization of the polymer components, or polymeric aggregates). This design approach requires careful selection of the reversible/dynamic bond used in the construction of the material to control its environmental responsiveness.

Modeling of electrohydrodynamic drying process using response surface methodology

PubMed Central

Dalvand, Mohammad Jafar; Mohtasebi, Seyed Saeid; Rafiee, Shahin

2014-01-01

Energy consumption index is one of the most important criteria for judging about new, and emerging drying technologies. One of such novel and promising alternative of drying process is called electrohydrodynamic (EHD) drying. In this work, a solar energy was used to maintain required energy of EHD drying process. Moreover, response surface methodology (RSM) was used to build a predictive model in order to investigate the combined effects of independent variables such as applied voltage, field strength, number of discharge electrode (needle), and air velocity on moisture ratio, energy efficiency, and energy consumption as responses of EHD drying process. Three-levels and four-factor Box–Behnken design was employed to evaluate the effects of independent variables on system responses. A stepwise approach was followed to build up a model that can map the entire response surface. The interior relationships between parameters were well defined by RSM. PMID:24936289

Consumer Vehicle Choice Model Documentation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Changzheng; Greene, David L

In response to the Fuel Economy and Greenhouse Gas (GHG) emissions standards, automobile manufacturers will need to adopt new technologies to improve the fuel economy of their vehicles and to reduce the overall GHG emissions of their fleets. The U.S. Environmental Protection Agency (EPA) has developed the Optimization Model for reducing GHGs from Automobiles (OMEGA) to estimate the costs and benefits of meeting GHG emission standards through different technology packages. However, the model does not simulate the impact that increased technology costs will have on vehicle sales or on consumer surplus. As the model documentation states, “While OMEGA incorporates functionsmore » which generally minimize the cost of meeting a specified carbon dioxide (CO2) target, it is not an economic simulation model which adjusts vehicle sales in response to the cost of the technology added to each vehicle.” Changes in the mix of vehicles sold, caused by the costs and benefits of added fuel economy technologies, could make it easier or more difficult for manufacturers to meet fuel economy and emissions standards, and impacts on consumer surplus could raise the costs or augment the benefits of the standards. Because the OMEGA model does not presently estimate such impacts, the EPA is investigating the feasibility of developing an adjunct to the OMEGA model to make such estimates. This project is an effort to develop and test a candidate model. The project statement of work spells out the key functional requirements for the new model.« less

Home care nurses' attitudes toward computers. A confirmatory factor analysis of the Stronge and Brodt instrument.

PubMed

Stricklin, Mary Lou; Bierer, S Beth; Struk, Cynthia

2003-01-01

Point-of-care technology for home care use will be the final step in enterprise-wide healthcare electronic communications. Successful implementation of home care point-of-care technology hinges upon nurses' attitudes toward point-of-care technology and its use in clinical practice. This study addresses the factors associated with home care nurses' attitudes using Stronge and Brodt's Nurse Attitudes Toward Computers instrument. In this study, the Nurses Attitudes Toward Computers instrument was administered to a convenience sample of 138 nurses employed by a large midwestern home care agency, with an 88% response rate. Confirmatory factor analysis corroborated the Nurses Attitudes Toward Computers' 3-dimensional factor structure for practicing nurses, which was labeled as nurses' work, security issues, and perceived barriers. Results from the confirmatory factor analysis also suggest that these 3 factors are internally correlated and represent multiple dimensions of a higher order construct labeled as nurses' attitudes toward computers. Additionally, two of these factors, nurses' work and perceived barriers, each appears to explain more variance in nurses' attitudes toward computers than security issues. Instrument reliability was high for the sample (.90), with subscale reliabilities ranging from 86 to 70.

Discrepant feeling rules and unscripted emotion work: women coping with termination for fetal anomaly.

PubMed

McCoyd, Judith L M

2009-10-01

The sociology of emotion is rapidly evolving and has implications for medical settings. Advancing medical technologies create new contexts for decision-making and emotional reaction that are framed by "feeling rules." Feeling rules guide not only behavior, but also how one believes one should feel, thereby causing one to attempt to bring one's authentic feelings into line with perceived feeling rules. Using qualitative data, the theoretical existence of feeling rules in pregnancy and prenatal testing is confirmed. Further examination extends this analysis: at times of technological development feeling rules are often discrepant, leaving patients with unscripted emotion work. Data from a study of women who interrupted anomalous pregnancies indicate that feeling rules are unclear when competing feeling rules are operating during times of societal and technological change. Because much of this occurs below the level of consciousness, medical and psychological services providers need to be aware of potential discrepancies in feeling rules and assist patients in identifying the salient feeling rules. Patients' struggles ease when they can recognize the discrepancies and assess their implications for decision-making and emotional response. (c) 2009 APA, all rights reserved.

Historical emissions of black and organic carbon aerosol from energy-related combustion, 1850-2000

NASA Astrophysics Data System (ADS)

Bond, Tami C.; Bhardwaj, Ekta; Dong, Rong; Jogani, Rahil; Jung, Soonkyu; Roden, Christoph; Streets, David G.; Trautmann, Nina M.

2007-06-01

We present an emission inventory of primary black carbon (BC) and primary organic carbon (OC) aerosols from fossil fuel and biofuel combustion between 1850 and 2000. We reconstruct fossil fuel consumption and represent changes in technology on a national and sectoral basis. Our estimates rely on new estimates of biofuel consumption, and updated emission factors for old technologies. Emissions of black carbon increase almost linearly, totaling about 1000 Gg in 1850, 2200 Gg in 1900, 3000 Gg in 1950, and 4400 Gg in 2000. Primary organic carbon shows a similar pattern, with emissions of 4100 Gg, 5800 Gg, 6700 Gg, and 8700 Gg in 1850, 1900, 1950, and 2000, respectively. Biofuel is responsible for over half of BC emission until about 1890, and dominates energy-related primary OC emission throughout the entire period. Coal contributes the greatest fraction of BC emission between 1880 and 1975, and is overtaken by emissions from biofuel around 1975, and by diesel engines around 1990. Previous work suggests a rapid rise in BC emissions between 1950 and 2000. This work supports a more gradual increase between 1950 and 2000, similar to the increase between 1850 and 1925; implementation of clean technology is a primary reason.

An intellectual property sharing initiative in agricultural biotechnology: development of broadly accessible technologies for plant transformation.

PubMed

Chi-Ham, Cecilia L; Boettiger, Sara; Figueroa-Balderas, Rosa; Bird, Sara; Geoola, Josef N; Zamora, Pablo; Alandete-Saez, Monica; Bennett, Alan B

2012-06-01

The Public Intellectual Property Resource for Agriculture (PIPRA) was founded in 2004 by the Rockefeller Foundation in response to concerns that public investments in agricultural biotechnology benefiting developing countries were facing delays, high transaction costs and lack of access to important technologies due to intellectual property right (IPR) issues. From its inception, PIPRA has worked broadly to support a wide range of research in the public sector, in specialty and minor acreage crops as well as crops important to food security in developing countries. In this paper, we review PIPRA's work, discussing the failures, successes, and lessons learned during its years of operation. To address public sector's limited freedom-to-operate, or legal access to third-party rights, in the area of plant transformation, we describe PIPRA's patent 'pool' approach to develop open-access technologies for plant transformation which consolidate patent and tangible property rights in marker-free vector systems. The plant transformation system has been licensed and deployed for both commercial and humanitarian applications in the United States (US) and Africa, respectively. © 2012 The Authors. Plant Biotechnology Journal © 2012 Society for Experimental Biology, Association of Applied Biologists and Blackwell Publishing Ltd.

Tele-ICU and Patient Safety Considerations.

PubMed

Hassan, Erkan

The tele-ICU is designed to leverage, not replace, the need for bedside clinical expertise in the diagnosis, treatment, and assessment of various critical illnesses. Tele-ICUs are primarily decentralized or centralized models with differing advantages and disadvantages. The centralized model has sufficiently powered published data to be associated with improved mortality and ICU length of stay in a cost-effective manner. Factors associated with improved clinical outcomes include improved compliance with best practices; providing off-hours implementation of the bedside physician's care plan; and identification of and rapid response to physiological instability (initial clinical review within 1 hour) and rapid response to alerts, alarms, or direct notification by bedside clinicians. With improved communication and frequent review of patients between the tele-ICU and the bedside clinicians, the bedside clinician can provide the care that only they can provide. Although technology continues to evolve at a rapid pace, technology alone will most likely not improve clinical outcomes. Technology will enable us to process real or near real-time data into complex and powerful predictive algorithms. However, the remote and bedside teams must work collaboratively to develop care processes to better monitor, prioritize, standardize, and expedite care to drive greater efficiencies and improve patient safety.

Spanish Secondary-School Science Teachers' Beliefs About Science-Technology-Society (STS) Issues

NASA Astrophysics Data System (ADS)

Vázquez-Alonso, Ángel; García-Carmona, Antonio; Manassero-Mas, María Antonia; Bennàssar-Roig, Antoni

2013-05-01

This study analyzes the beliefs about science-technology-society, and other Nature of Science (NOS) themes, of a large sample (613) of Spanish pre- and in-service secondary education teachers through their responses to 30 items of the Questionnaire of Opinions on Science, Technology and Society. The data were processed by means of a multiple response model to generate the belief indices used as the bases for subsequent quantitative and qualitative analyses. Other studies have reported a negative profile of teachers' understanding in this area, but the diagnosis emerging from the present work is more complex. There was a mix of appropriate beliefs coexisting with others that are inappropriate on the topics analyzed. The overall assessment, however, is negative since clearly teachers need to have a better understanding of these questions. There were scant differences between the pre- and in-service teachers, and hence no decisive evidence that the practice of teaching contributes to improving the in-service teachers' understanding. These results suggest there is an urgent need to bring the initial and continuing education of science teachers up to date to improve their understanding of these topics of science curricula, and thus improve the teaching of science.

Turnkey Heating, Ventilating, and Air Conditioning and Lighting Retrofit Solution Combining Energy Efficiency and Demand Response Benefits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doebber, Ian; Deru, Michael; Trenbath, Kim

NREL worked with the Bonneville Power Administration's Technology Innovation Office to demonstrate a turnkey, retrofit technology that combines demand response (DR) and energy efficiency (EE) benefits for HVAC and lighting in retail buildings. As a secondary benefit, we also controlled various plug loads and electric hot water heaters (EHWH). The technology demonstrated was Transformative Wave's eIQ Building Management System (BMS) automatically responding to DR signals. The BMS controlled the HVAC rooftop units (RTU) using the CATALYST retrofit solution also developed by Transformative Wave. The non-HVAC loads were controlled using both hardwired and ZigBee wireless communication. The wireless controllers, manufactured bymore » Autani, were used when the building's electrical layout was too disorganized to leverage less expensive hardwired control. The six demonstration locations are within the Seattle metro area. Based on the assets curtailed by the BMS at each location, we projected the DR resource. We were targeting a 1.7 W/ft2 shed for the summer Day-Ahead events and a 0.7 W/ft2 shed for the winter events. While summarized in Table ES-1, only one summer DR event was conducted at Casino #2.« less

Societal response to nanotechnology: converging technologies-converging societal response research?

NASA Astrophysics Data System (ADS)

Ronteltap, Amber; Fischer, Arnout R. H.; Tobi, Hilde

2011-10-01

Nanotechnology is an emerging technology particularly vulnerable to societal unrest, which may hinder its further development. With the increasing convergence of several technological domains in the field of nanotechnology, so too could convergence of social science methods help to anticipate societal response. This paper systematically reviews the current state of convergence in societal response research by first sketching the predominant approaches to previous new technologies, followed by an analysis of current research into societal response to nanotechnology. A set of 107 papers on previous new technologies shows that rational actor models have played an important role in the study of societal response to technology, in particular in the field of information technology and the geographic region of Asia. Biotechnology and nuclear power have, in contrast, more often been investigated through risk perception and other affective determinants, particularly in Europe and the USA. A set of 42 papers on societal response to nanotechnology shows similarities to research in biotechnology, as it also builds on affective variables such as risk perception. Although there is a tendency to extend the rational models with affective variables, convergence in social science approaches to response to new technologies still has a long way to go. The challenge for researchers of societal response to technologies is to converge to some shared principles by taking up the best parts from the rational actor models dominant in information technology, whilst integrating non-rational constructs from biotechnology research. The introduction of nanotechnology gives a unique opportunity to do so.

The interactive learning toolkit: technology and the classroom

NASA Astrophysics Data System (ADS)

Lukoff, Brian; Tucker, Laura

2011-04-01

Peer Instruction (PI) and Just-in-Time-Teaching (JiTT) have been shown to increase both students' conceptual understanding and problem-solving skills. However, the time investment for the instructor to prepare appropriate conceptual questions and manage student JiTT responses is one of the main implementation hurdles. To overcome this we have developed the Interactive Learning Toolkit (ILT), a course management system specifically designed to support PI and JiTT. We are working to integrate the ILT with a fully interactive classroom system where students can use their laptops and smartphones to respond to ConcepTests in class. The goal is to use technology to engage students in conceptual thinking both in and out of the classroom.

Developing the online survey.

PubMed

Gordon, Jeffry S; McNew, Ryan

2008-12-01

Institutions of higher education are now using Internet-based technology tools to conduct surveys for data collection. Research shows that the type and quality of responses one receives with online surveys are comparable with what one receives in paper-based surveys. Data collection can take place on Web-based surveys, e-mail-based surveys, and personal digital assistants/Smartphone devices. Web surveys can be subscription templates, software packages installed on one's own server, or created from scratch using Web programming development tools. All of these approaches have their advantages and disadvantages. The survey owner must make informed decisions as to the right technology to implement. The correct choice can save hours of work in sorting, organizing, and analyzing data.

A Method of Synchrophasor Technology for Detecting and Analyzing Cyber-Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCann, Roy; Al-Sarray, Muthanna

Studying cybersecurity events and analyzing their impacts encourage planners and operators to develop innovative approaches for preventing attacks in order to avoid outages and other disruptions. This work considers two parts in security studies; detecting an integrity attack and examining its effects on power system generators. The detection was conducted through employing synchrophasor technology to provide authentication of ACG commands based on observed system operating characteristics. The examination of an attack is completed via a detailed simulation of a modified IEEE 68-bus benchmark model to show the associated power system dynamic response. The results of the simulation are discussed formore » assessing the impacts of cyber threats.« less

Proceedings of the Third Annual Deep Brain Stimulation Think Tank: A Review of Emerging Issues and Technologies

PubMed Central

Rossi, P. Justin; Gunduz, Aysegul; Judy, Jack; Wilson, Linda; Machado, Andre; Giordano, James J.; Elias, W. Jeff; Rossi, Marvin A.; Butson, Christopher L.; Fox, Michael D.; McIntyre, Cameron C.; Pouratian, Nader; Swann, Nicole C.; de Hemptinne, Coralie; Gross, Robert E.; Chizeck, Howard J.; Tagliati, Michele; Lozano, Andres M.; Goodman, Wayne; Langevin, Jean-Philippe; Alterman, Ron L.; Akbar, Umer; Gerhardt, Greg A.; Grill, Warren M.; Hallett, Mark; Herrington, Todd; Herron, Jeffrey; van Horne, Craig; Kopell, Brian H.; Lang, Anthony E.; Lungu, Codrin; Martinez-Ramirez, Daniel; Mogilner, Alon Y.; Molina, Rene; Opri, Enrico; Otto, Kevin J.; Oweiss, Karim G.; Pathak, Yagna; Shukla, Aparna; Shute, Jonathan; Sheth, Sameer A.; Shih, Ludy C.; Steinke, G. Karl; Tröster, Alexander I.; Vanegas, Nora; Zaghloul, Kareem A.; Cendejas-Zaragoza, Leopoldo; Verhagen, Leonard; Foote, Kelly D.; Okun, Michael S.

2016-01-01

The proceedings of the 3rd Annual Deep Brain Stimulation Think Tank summarize the most contemporary clinical, electrophysiological, imaging, and computational work on DBS for the treatment of neurological and neuropsychiatric disease. Significant innovations of the past year are emphasized. The Think Tank's contributors represent a unique multidisciplinary ensemble of expert neurologists, neurosurgeons, neuropsychologists, psychiatrists, scientists, engineers, and members of industry. Presentations and discussions covered a broad range of topics, including policy and advocacy considerations for the future of DBS, connectomic approaches to DBS targeting, developments in electrophysiology and related strides toward responsive DBS systems, and recent developments in sensor and device technologies. PMID:27092042

The status of training and education in information and computer technology of Australian nurses: a national survey.

PubMed

Eley, Robert; Fallon, Tony; Soar, Jeffrey; Buikstra, Elizabeth; Hegney, Desley

2008-10-01

A study was undertaken of the current knowledge and future training requirements of nurses in information and computer technology to inform policy to meet national goals for health. The role of the modern clinical nurse is intertwined with information and computer technology and adoption of such technology forms an important component of national strategies in health. The majority of nurses are expected to use information and computer technology during their work; however, the full extent of their knowledge and experience is unclear. Self-administered postal survey. A 78-item questionnaire was distributed to 10,000 Australian Nursing Federation members to identify the nurses' use of information and computer technology. Eighteen items related to nurses' training and education in information and computer technology. Response rate was 44%. Computers were used by 86.3% of respondents as part of their work-related activities. Between 4-17% of nurses had received training in each of 11 generic computer skills and software applications during their preregistration/pre-enrolment and between 12-30% as continuing professional education. Nurses who had received training believed that it was adequate to meet the needs of their job and was given at an appropriate time. Almost half of the respondents indicated that they required more training to better meet the information and computer technology requirements of their jobs and a quarter believed that their level of computer literacy was restricting their career development. Nurses considered that the vast majority of employers did not encourage information and computer technology training and, for those for whom training was available, workload was the major barrier to uptake. Nurses favoured introduction of a national competency standard in information and computer technology. For the considerable benefits of information and computer technology to be incorporated fully into the health system, employers must pay more attention to the training and education of nurses who are the largest users of that technology. Knowledge of the training and education needs of clinical nurses with respect to information and computer technology will provide a platform for the development of appropriate policies by government and by employers.

A Business Case Analysis of Pre-Positioned Expeditionary Assistance Kit Joint Capability Technology Demonstration

DTIC Science & Technology

2013-12-01

of power from sunlight or a wind turbine (same solar panel tarps used in NEST Raptor Solar Light Trailer) • Global Positioning System (GPS) devices...satellite-enabled rapid wireless communications to the most critical areas and functions, working with Joint Task Forces. The first priority after the...a rapid response wireless communications system from military, civilian government, and non-government organizations. The tasks performed by HFN

A Program for Computing Steady Inviscid Three-Dimensional Supersonic Flow on Reentry Vehicles. Volume I: Analysis and Programming

DTIC Science & Technology

1977-02-11

Continue an reverse aide If necessaty and Identify by block number) A comprehensive computational procedure is presented for predicting the...Aeroballistic Reentry Technology ( ART ) program with some of the fundamental analytical and numerical work supported by NSWC Independent Research Funds. Most of...the Aerospace Corporation. The authors gratefully acknowledge the efforts of Mr. R. Feldhuhn, NSWC coordinator for the ART program, who was responsible

The Battle Behind the Wire: U. S. Prisoner and Detainee Operations from World War II to Iraq

DTIC Science & Technology

2011-01-01

Powlen from Logos Technologies for their reviews of this publication. The authors are solely responsible for any errors of fact or opinion. xxiii...were then deployed as recruiters in the camps or assigned to work with the Soviet military on psychological operations (Smith, 1996). Perhaps the...Prisoners also helped the Army interview other prisoners, reviewed leaflets for psychological operations, and helped in writing and translation

[Investigation of the Campaign of"Eliminating the Four Pests and Paying Attention to Hygiene"in Shanxi province in the 1950s, with special reference to technological innovation].

PubMed

Wu, X Y

2016-07-28

In order to improve the level of people's living and health standard, increase the output of cereal crops, achieve the country's economic recovery and development, and consolidate the new state power, a Campaign of"Eliminating the Four Pests and Paying Attention to Hygiene"in the field of health was launched by the Central Government in the 1950s. In response to the call of government, Shanxi province actively organized the people to participate in this Campaign. For improving the efficiency of Eliminating the Four Pests, people widely carried out technological innovation, with constant creation and invented advanced tools, and gained fruitful technological achievements. Through technological innovation, the working efficiency and quality were enhanced. More importantly, the interaction between the national and local authorities was promoted. In other words, there was a formation of national political domination and power over the local authority, as well as the"owner"awareness and the formation of the state conception.

Present statue of Japanese ERS-1 Project

NASA Technical Reports Server (NTRS)

Ishiwada, Yasufumi; Nemoto, Yoshiaki

1986-01-01

Earth Resources Satellite 1 (ERS-1) will be launched in the FY 1990 with the H-1 rocket from Tanegashima Space Center. ERS-1 will seek to firmly establish remote sensing technologies from space by using synthetic aperture radar and optical sensors, as well as primarily exploring for non-renewable resources and also monitoring for land use, agriculture, forestry, fishery, conservation of environment, prevention of disasters, and surveillance of coastal regions. ERS-1 is a joint project in which the main responsibility for the development of the mission equipment is assumed by the Agency of Industrial Science and Technology, MITI, and the Technology Research Association of Resources Remote Sensing System, while that for the satellite itself and launching rocket is assumed by the Science and Technology Agency (STA) and the National Space Development Agency (NASDA). In relation to this project, users have maintained a close working relationship with the manufacturers after submitting their requirements in 1984 on the specifications of the mission equipments. This missions parameters are outlined.

Degradation of CMOS image sensors in deep-submicron technology due to γ-irradiation

NASA Astrophysics Data System (ADS)

Rao, Padmakumar R.; Wang, Xinyang; Theuwissen, Albert J. P.

2008-09-01

In this work, radiation induced damage mechanisms in deep submicron technology is resolved using finger gated-diodes (FGDs) as a radiation sensitive tool. It is found that these structures are simple yet efficient structures to resolve radiation induced damage in advanced CMOS processes. The degradation of the CMOS image sensors in deep-submicron technology due to γ-ray irradiation is studied by developing a model for the spectral response of the sensor and also by the dark-signal degradation as a function of STI (shallow-trench isolation) parameters. It is found that threshold shifts in the gate-oxide/silicon interface as well as minority carrier life-time variations in the silicon bulk are minimal. The top-layer material properties and the photodiode Si-SiO2 interface quality are degraded due to γ-ray irradiation. Results further suggest that p-well passivated structures are inevitable for radiation-hard designs. It was found that high electrical fields in submicron technologies pose a threat to high quality imaging in harsh environments.

Exploring the factors that influence physician technostress from using mobile electronic medical records.

PubMed

Liu, Chung-Feng; Cheng, Tain-Junn; Chen, Chin-Tung

2017-10-25

This paper proposes an integrated model for investigating how physicians' perceived individual and technology characteristics affect their technological stress (technostress) that is derived from using mobile electronic medical records (MEMRs). Individual characteristics comprise constructs of mobile self-efficacy and technology dependence, whereas perceived technology characteristics comprise constructs of perceived usefulness, complexity, and reliability. We employed the survey method to collect 158 valid questionnaires from physicians working at three branch hospitals to determine perceptions regarding MEMRs, yielding a response rate of 33.62%. Partial least squares, a structural equation modeling technique, was used for model examination and hypothesis testing. The results show that physicians have a low perception of MEMR dependence and technostress. Furthermore, physicians' perceived MEMR technology dependency, mobile self-efficacy, and complexity were proven to significantly affect physician technostress when using MEMRs, whereas perceived usefulness and reliability were not. The explanatory power of the research model reached 67.8%. The results of this study provide valuable insights and significant knowledge for technostress in health care, particularly from academic and practical perspectives.

On genies and bottles: scientists' moral responsibility and dangerous technology R&D.

PubMed

Koepsell, David

2010-03-01

The age-old maxim of scientists whose work has resulted in deadly or dangerous technologies is: scientists are not to blame, but rather technologists and politicians must be morally culpable for the uses of science. As new technologies threaten not just populations but species and biospheres, scientists should reassess their moral culpability when researching fields whose impact may be catastrophic. Looking at real-world examples such as smallpox research and the Australian "mousepox trick", and considering fictional or future technologies like Kurt Vonnegut's "ice-nine" from Cat's Cradle, and the "grey goo" scenario in nanotechnology, this paper suggests how ethical principles developed in biomedicine can be adjusted for science in general. An "extended moral horizon" may require looking not just to the effects of research on individual human subjects, but also to effects on humanity as a whole. Moreover, a crude utilitarian calculus can help scientists make moral decisions about which technologies to pursue and disseminate when catastrophes may result. Finally, institutions should be devised to teach these moral principles to scientists, and require moral education for future funding.

Assessment of the Cast Stone Low-Temperature Waste Form Technology Coupled with Technetium Removal - 14379

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Christopher F.; Rapko, Brian M.; Serne, R. Jeffrey

2014-03-03

The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) were chartered to implement a science and technology program addressing low-temperature waste forms for immobilization of DOE aqueous waste streams, including technetium removal as an implementing technology. As a first step, the laboratories examined the technical risks and uncertainties associated withmore » the Cast Stone waste immobilization and technetium removal projects at Hanford. Science and technology gaps were identified for work associated with 1) conducting performance assessments and risk assessments of waste form and disposal system performance, and 2) technetium chemistry in tank wastes and separation of technetium from waste processing streams. Technical approaches to address the science and technology gaps were identified and an initial sequencing priority was suggested. A subset of research was initiated in 2013 to begin addressing the most significant science and technology gaps. The purpose of this paper is to report progress made towards closing these gaps and provide notable highlights of results achieved to date.« less

European network for health technology assessment, EUnetHTA: planning, development, and implementation of a sustainable European network for health technology assessment.

PubMed

Kristensen, Finn Børlum; Mäkelä, Marjukka; Neikter, Susanna Allgurin; Rehnqvist, Nina; Håheim, Lise Lund; Mørland, Berit; Milne, Ruairidh; Nielsen, Camilla Palmhøj; Busse, Reinhard; Lee-Robin, Sun Hae; Wild, Claudia; Espallargues, Mireia; Chamova, Julia

2009-12-01

The European network on Health Technology Assessment (EUnetHTA) aimed to produce tangible and practical results to be used in the various phases of health technology assessment and to establish a framework and processes to support this. This article presents the background, objectives, and organization of EUnetHTA, which involved a total of sixty-four partner organizations. Establishing an effective and sustainable structure for a transnational network involved many managerial, policy, and methodological tools, according to the objective of each task or Work Package. Transparency in organization, financial transactions, and decision making was a key principle in the management of the Project as was the commitment to appropriately involve stakeholders. EUnetHTA activities resulted in a clear management and governance structure, efficient partnership, and transnational cooperation. The Project developed a model for sustainable continuation of the EUnetHTA Collaboration. The EUnetHTA Project achieved its goals by producing a suite of practical tools, a strong network, and plans for continuing the work in a sustainable EUnetHTA Collaboration that facilitates and promotes the use of HTA at national and regional levels. Responsiveness to political developments in Europe should be balanced with maintaining a high level of ambition to promote independent, evidence-based information and well-tested tools for best practice based on a strong network of HTA institutions.

Distributed Observer Network

NASA Technical Reports Server (NTRS)

2008-01-01

NASA s advanced visual simulations are essential for analyses associated with life cycle planning, design, training, testing, operations, and evaluation. Kennedy Space Center, in particular, uses simulations for ground services and space exploration planning in an effort to reduce risk and costs while improving safety and performance. However, it has been difficult to circulate and share the results of simulation tools among the field centers, and distance and travel expenses have made timely collaboration even harder. In response, NASA joined with Valador Inc. to develop the Distributed Observer Network (DON), a collaborative environment that leverages game technology to bring 3-D simulations to conventional desktop and laptop computers. DON enables teams of engineers working on design and operations to view and collaborate on 3-D representations of data generated by authoritative tools. DON takes models and telemetry from these sources and, using commercial game engine technology, displays the simulation results in a 3-D visual environment. Multiple widely dispersed users, working individually or in groups, can view and analyze simulation results on desktop and laptop computers in real time.

Control and Responsibility: Taking a Closer Look at the Work of Ensuring Well-Being in Neoliberal Schools.

PubMed

Matthiesen, Noomi

2018-03-03

This paper argues that the neo-liberal work of schooling includes a focus on producing subjectivities with a high level of well-being. This is done by drawing on evidence based therapeutic techniques that are adjusted to a school setting. These are termed 'therapeutic socio-educational technologies. It is argued that these practices adhere to the neo-liberal logic of increased competition, standardization and testing, focusing on the individual child. There are a number of problems connected to these well-being enhancing technologies. These include the risk of producing passive and submissive subjectivities, that are understood as needing therapy by default; pathologizing the discomfort and struggles that are an inherent part of learning; the fragmentation of the child, focusing directly on the child rather than on the content matter at hand; producing an overly mechanic and technified pedagogy, focusing on output, as well as laying claim to much control in a risk-filled relational endeavor.

Why aren't women sticking with science in Taiwan?

PubMed

Cheng, Ling-Fang

2010-06-01

This paper explores the factors that contribute to the "leaky pipeline" in science, technology and medicine in Taiwan. The term "leaky pipeline" refers to the steady attrition of women throughout their careers in science, technology and medicine-fields in which men constitute the majority. As a result of this attrition, women are under-represented in the top positions. This phenomenon has been well studied in the United States, and based on the available data in the Chinese and English-language literature, this paper focuses on: (1) the social-cultural factors that keep young women away from science and medicine; (2) the difficulties faced by woman scientists when trying to balance work and family responsibilities; and (3) the impact of the pervasive masculine culture on training and promotion in career development. Conclusions include suggestions for improvements for equality between the sexes in science education, family responsive policies, and institutional reform. 2010 Elsevier. Published by Elsevier B.V. All rights reserved.

Work zone intrusion alert technologies : assessment and practical guidance : final report.

DOT National Transportation Integrated Search

2017-06-01

A work zone intrusion alert technology is a type of safety system that is used in a roadway work zone to alert field workers and secure time for them to escape when errant vehicles intrude into the work zone. Although such technologies have potential...

High-performance flexible strain sensor with bio-inspired crack arrays.

PubMed

Han, Zhiwu; Liu, Linpeng; Zhang, Junqiu; Han, Qigang; Wang, Kejun; Song, Honglie; Wang, Ze; Jiao, Zhibin; Niu, Shichao; Ren, Luquan

2018-06-12

Biomimetic sensor technology is always superior to existing human technologies. The scorpion, especially the forest scorpion, has a unique ability to detect subtle vibrations, which is attributed to the microcrack-shaped slit sensillum on its legs. Here, the biological sensing mechanism of the typical scorpion (Heterometrus petersii) was intensively studied in order to newly design and significantly improve the flexible strain sensors. Benefiting from the easy-crack property of polystyrene (PS) and using the solvent-induced swelling as well as double template transferring method, regular and controllable microcrack arrays were successfully fabricated on top of polydimethylsiloxane (PDMS). Using this method, any physical damage to PDMS could be effectively avoided. More fortunately, this bio-inspired crack arrays fabricated in this work also had a radial-like pattern similar to the slit sensillum of the scorpion, which was another unexpected imitation. The gauge factor (GF) of the sensor was conservatively evaluated at 5888.89 upon 2% strain and the response time was 297 ms. Afterward, it was demonstrated that the bio-inspired regular microcrack arrays could also significantly enhance the performance of traditional strain sensors, especially in terms of the sensitivity and response time. The practical applications, such as the detection of human motions and surface folding, were also tested in this work, with the results showing significant potential applications in numerous fields. This work changes the traditional waste cracks on some damaged products into valuable things for ultrasensitive mechanical sensors. Moreover, with this manufacturing technique, we could easily realize the simple, low cost and large-scale fabrication of advanced bioinpired sensors.

Hybrid nanoporous silicon optical biosensor architectures for biological sample analysis

NASA Astrophysics Data System (ADS)

Bonanno, Lisa M.; Zheng, Hong; DeLouise, Lisa A.

2010-02-01

This work focuses on demonstrating proof-of-concept for a novel nanoparticle optical signal amplification scheme employing hybrid porous silicon (PSi) sensors. We are investigating the development of target responsive hydrogels integrated with PSi optical transducers. These hybrid-PSi sensors can be designed to provide a tunable material response to target concentration ranging from swelling to complete chain dissolution. The corresponding refractive index changes are significant and readily detected by the PSi transducer. However, to increase signal to noise, lower the limit of detection, and provide a visual read out capability, we are investigating the incorporation of high refractive index nanoparticles (NP) into the hydrogel for optical signal amplification. These NPs can be nonspecifically encapsulated, or functionalized with bioactive ligands to bind polymer chains or participate in cross linking. In this work, we demonstrate encapsulation of high refractive index QD nanoparticles into a 5wt% polyacrylamide hydrogel crosslinked with N,N'-methylenebisacrylamide (BIS) and N,N Bis-acryloyl cystamine (BAC). A QD loading (~0.29 wt%) produced a 2X larger optical shift compared to the control. Dissolution of disulphide crosslinks, using Tris[2-carboxyethyl] phosphine (TCEP) reducing agent, induced gel swelling and efficient QD release. We believe this hybrid sensor concept constitutes a versatile technology platform capable of detecting a wide range of bio/chemical targets provided target analogs can be linked to the polymer backbone and crosslinks can be achieved with target responsive multivalent receptors, such a antibodies. The optical signal amplification scheme will enable a lower limit of detection sensitivity not yet demonstrated with PSi technology and colorimetric readout visible to the naked eye.

Strategy to Address Private Location Cardiac Arrest: A Public Safety Survey.

PubMed

Blackwood, Jennifer; Eisenberg, Mickey; Jorgenson, Dawn; Nania, James; Howard, Bryan; Collins, Bryan; Connell, Peter; Day, Tim; Rohrbach, Cody; Rea, Thomas

2018-05-16

Most cardiac arrests occur in the private setting where response is often delayed and outcomes are poor. We surveyed public safety personnel to determine if they would volunteer to respond into private locations and/or be equipped with a personal automated external defibrillator (AED) as part of a vetted responder program that would use smart geospatial technology. We conducted an anonymized survey among personnel from fire-based emergency medical services (EMS) and search and rescue organizations from Washington State. The goal of the survey was to evaluate whether there was interest among cardiopulmonary resuscitation (CPR)-trained, public safety personnel to respond with or without an AED to private-residence cardiac arrest outside of working hours using a smartphone platform. We used a 5-point Likert scale to assess responses. Overall the response rate was 73.7% (527/715). Two-thirds of respondents were between the ages of 30-59 with a similar proportion certified as a firefighter-emergency medical technician (EMT). Most were male (80%). As a vetted volunteer responder, the majority would "almost always" or "often" respond to private (79.7%) or public locations (85.2%) outside of work hours. The majority (54.1%) would store the AED in their vehicle while 38% would plan to keep the AED on their person. A total of 83% were "definitely' or "probably interested" in participating in the program. The results of this survey indicate that public safety personnel are willing to respond to suspected cardiac arrest during off-hours using geospatial smart technology to private locations with or without an AED.

[Technology and future ways of thinking related to work from ergonomics points of views in moments of global crisis].

PubMed

Puentes-Lagos, David E; García-Acosta, Gabriel

2012-06-01

Is it possible to establish (at short, medium and long term) future work conditions or expected work conditions for Colombian people considering upcoming work technologies? Is it possible to anticipate future work desirable work conditions for Colombian people in order to plan (foresee?) work technologies? These questions guided this research and they point to an action thesis and to a reaction one in this context of work crisis. Even though a work technology establishes where, when, how, who, who with, and using what element work is done, it also establishes certain work conditions. Besides, multiple forms of considering and deconstructing past have been created from many disciplines. However, in order to foresee or construct work technologies requires a different perspective for looking further. This research has been carried out considering other disciplines points of view regarding Future Studies and Future Thinking Studies. This research has the purpose of finding future paths for Future Thinking Studies from ergonomics point of view in this moment of global work crisis we are going through.

Science and the storms: The USGS response to the hurricanes of 2005

USGS Publications Warehouse

Farris, G. S.; Smith, G.J.; Crane, M.P.; Demas, C.R.; Robbins, L.L.; Lavoie, D.L.

2007-01-01

This report is designed to give a view of the immediate response of the U.S. Geological Survey (USGS) to four major hurricanes of 2005: Dennis, Katrina, Rita, and Wilma. Some of this response took place days after the hurricanes; other responses included fieldwork and analysis through the spring. While hurricane science continues within the USGS, this overview of work following these hurricanes reveals how a Department of the Interior bureau quickly brought together a diverse array of its scientists and technologies to assess and analyze many hurricane effects. Topics vary from flooding and water quality to landscape and ecosystem impacts, from geotechnical reconnaissance to analyzing the collapse of bridges and estimating the volume of debris. Thus, the purpose of this report is to inform the American people of the USGS science that is available and ongoing in regard to hurricanes. It is the hope that such science will help inform the decisions of those citizens and officials tasked with coastal restoration and planning for future hurricanes. Chapter 1 is an essay establishing the need for science in building a resilient coast. The second chapter includes some hurricane facts that provide hurricane terminology, history, and maps of the four hurricanes’ paths. Chapters that follow give the scientific response of USGS to the storms. Both English and metric measurements are used in the articles in anticipation of both general and scientific audiences in the United States and elsewhere. Chapter 8 is a compilation of relevant ongoing and future hurricane work. The epilogue marks the 2-year anniversary of Hurricane Katrina. An index of authors follows the report to aid in finding articles that are cross-referenced within the report. In addition to performing the science needed to understand the effects of hurricanes, USGS employees helped in the rescue of citizens by boat and through technology by “geoaddressing” 911 calls after Katrina and Rita so that other rescuers could find persons trapped in attics and porches. They also delivered food and water to residents stranded along the lower Mississippi River for several days. That work is reported in chapter 3 of this volume. A great number of scientists contributed to this peer-reviewed report designed for a general audience. Because they work for USGS—an unbiased, multidisciplinary science organization that focuses on biology, geography, geology, geospatial information, and water—they are dedicated to the timely, relevant, and impartial study of the landscape and natural resources of the Nation, as well as natural hazards, like hurricanes, that threaten the Nation. To learn more about their work, visit the USGS Web site (www.usgs.gov).

Nanoparticle-Based Manipulation of Antigen-Presenting Cells for Cancer Immunotherapy.

PubMed

Fang, Ronnie H; Kroll, Ashley V; Zhang, Liangfang

2015-11-04

Immunotherapeutic approaches for treating cancer overall have been receiving a considerable amount of interest due to the recent approval of several clinical formulations. Among the different modalities, anticancer vaccination acts by training the body to endogenously generate a response against tumor cells. However, despite the large amount of work that has gone into the development of such vaccines, the near absence of clinically approved formulations highlights the many challenges facing those working in the field. The generation of potent endogenous anticancer responses poses unique challenges due to the similarity between cancer cells and normal, healthy cells. As researchers continue to tackle the limited efficacy of vaccine formulations, fresh and novel approaches are being sought after to address many of the underlying problems. Here the application of nanoparticle technology towards the development of anticancer vaccines is discussed. Specifically, there is a focus on the benefits of using such strategies to manipulate antigen presenting cells (APCs), which are essential to the vaccination process, and how nanoparticle-based platforms can be rationally engineered to elicit appropriate downstream immune responses. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Exploring the Multi-Layered Affordances of Composing and Performing Interactive Music with Responsive Technologies.

PubMed

Einarsson, Anna; Ziemke, Tom

2017-01-01

The question motivating the work presented here, starting from a view of music as embodied and situated activity, is how can we account for the complexity of interactive music performance situations. These are situations in which human performers interact with responsive technologies, such as sensor-driven technology or sound synthesis affected by analysis of the performed sound signal. This requires investigating in detail the underlying mechanisms, but also providing a more holistic approach that does not lose track of the complex whole constituted by the interactions and relationships of composers, performers, audience, technologies, etc. The concept of affordances has frequently been invoked in musical research, which has seen a " bodily turn " in recent years, similar to the development of the embodied cognition approach in the cognitive sciences. We therefore begin by broadly delineating its usage in the cognitive sciences in general, and in music research in particular. We argue that what is still missing in the discourse on musical affordances is an encompassing theoretical framework incorporating the sociocultural dimensions that are fundamental to the situatedness and embodiment of interactive music performance and composition. We further argue that the cultural affordances framework, proposed by Rietveld and Kiverstein (2014) and recently articulated further by Ramstead et al. (2016) in this journal, although not previously applied to music, constitutes a promising starting point. It captures and elucidates this complex web of relationships in terms of shared landscapes and individual fields of affordances. We illustrate this with examples foremost from the first author's artistic work as composer and performer of interactive music. This sheds new light on musical composition as a process of construction-and embodied mental simulation-of situations, guiding the performers' and audience's attention in shifting fields of affordances. More generally, we believe that the theoretical perspectives and concrete examples discussed in this paper help to elucidate how situations-and with them affordances-are dynamically constructed through the interactions of various mechanisms as people engage in embodied and situated activity.

Communication Technology: Pros and Cons of Constant Connection to Work

ERIC Educational Resources Information Center

Diaz, Ismael; Chiaburu, Dan S.; Zimmerman, Ryan D.; Boswell, Wendy R.

2012-01-01

We examined the relationship between employees' attitudes related to communication technology (CT) flexibility, communication technology (CT) use, work-to-life conflict and work satisfaction. Based on data obtained from 193 employees, CT flexibility predicted more CT use. Further, CT use was associated not only with increased work satisfaction,…

Future Work. Myths and Realities No. 11.

ERIC Educational Resources Information Center

Kerka, Sandra

In many of the stories foretelling the future of work, technology is assumed to be the irresistible driver of change. Both ends of the spectrum are foreseen: either technology will create new jobs and transform existing work to higher skill levels, or technology, especially information technology, will destroy jobs or degrade them into less…

Workarounds and obstacles: unexpected source of innovation.

PubMed

Lalley, Cathy

2014-01-01

Nurse leaders are aware that nurses are finding ways to adapt health information technology to patient care activities. Previous literature has presented nurses' response to technology obstacles as a work-around, characterized as a negative behavior. Using narrative inquiry, this article examines 9 direct care nurses' interactions on a medical/surgical/telemetry unit. Specifically, nurses' encounters with technology obstacles will be addressed from a complexity science perspective. Four support staff including the clinical nurse manager, pharmacist, quality nurse, and project manager who is also a nurse were interviewed as part of data collection. Complexity science provides nurse leaders' insight into nurses' behavior where outcomes emerge from tensions in the environment through multidirectional and self-organizing interactions. Innovation was found when nurses responded to health information technology obstacles with self-organizing interactions, sensitivity to initial conditions, and multidirectionality. Their actions were also influenced by many sets of rules. Nurses self-organized with coworkers to find better ways to deliver care to patients when using technology. Opportunities exist for nurse leaders to facilitate interactions among nurses and other members of the organization to realize better use of health information technology that improves the patient experience.

Biased perception about gene technology: How perceived naturalness and affect distort benefit perception.

PubMed

Siegrist, Michael; Hartmann, Christina; Sütterlin, Bernadette

2016-01-01

In two experiments, the participants showed biased responses when asked to evaluate the benefits of gene technology. They evaluated the importance of additional yields in corn fields due to a newly introduced variety, which would increase a farmer's revenues. In one condition, the newly introduced variety was described as a product of traditional breeding; in the other, it was identified as genetically modified (GM). The two experiments' findings showed that the same benefits were perceived as less important for a farmer when these were the result of GM crops compared with traditionally bred crops. Mediation analyses suggest that perceived naturalness and the affect associated with the technology per se influence the interpretation of the new information. The lack of perceived naturalness of gene technology seems to be the reason for the participants' perceived lower benefits of a new corn variety in the gene technology condition compared with the perceptions of the participants assigned to the traditional breeding condition. The strategy to increase the acceptance of gene technology by introducing plant varieties that better address consumer and producer needs may not work because people discount its associated benefits. Copyright © 2015 Elsevier Ltd. All rights reserved.

Engineering innovation in healthcare: technology, ethics and persons.

PubMed

Bowen, W Richard

2011-01-01

Engineering makes profound contributions to our health. Many of these contributions benefit whole populations, such as clean water and sewage treatment, buildings, dependable sources of energy, efficient harvesting and storage of food, and pharmaceutical manufacture. Thus, ethical assessment of these and other engineering activities has often emphasized benefits to communities. This is in contrast to medical ethics, which has tended to emphasize the individual patient affected by a doctor's actions. However technological innovation is leading to an entanglement of the activities, and hence ethical responsibilities, of healthcare professionals and engineering professionals. The article outlines three categories of innovation: assistive technologies, telehealthcare and quasi-autonomous systems. Approaches to engineering ethics are described and applied to these innovations. Such innovations raise a number of ethical opportunities and challenges, especially as the complexity of the technology increases. In particular the design and operation of the technologies require engineers to seek closer involvement with the persons benefiting from their work. Future innovation will require engineers to have a good knowledge of human biology and psychology. More particularly, healthcare engineers will need to prioritize each person's wellbeing, agency, human relationships and ecological self rather than technology, in the same way that doctors prioritize the treatment of persons rather than their diseases.

Sociotechnical analysis of nurses' use of personal mobile phones at work.

PubMed

Bautista, John Robert; Lin, Trisha T C

2016-11-01

Nurses' use of personal mobiles phones at work is a growing trend in healthcare organizations. Although recent studies have explored the positive and negative implications of nurses using personal mobile phones at work, none has yet analyzed the interactions of sociotechnical components (users, technology and policy) on nurses' use of personal mobile phones at work. Identify sociotechnical interactions by analyzing each sociotechnical component (users, technology and policy) that affects nurses' use of personal mobile phones at work. In-depth interviews were conducted with 30 nurses employed in 13 hospitals in the Philippines. The respondents include staff nurses (n=23), charge nurses (n=4), and nurse managers (n=3). Staff nurses were asked on their use of personal mobile phones at work, while charge and nurse managers were asked on their observations regarding staff nurses' use of personal mobile phones at work. Responses were analyzed qualitatively using sociotechnical analysis. Sociotechnical analysis indicated that staff nurses used their personal mobile phones at work in various ways because its use helped in their nursing work, but inevitably altered a few of their routines. Although most hospitals had policies that prohibit the use of mobile phones, staff nurses justified their use of personal mobile phones by using it for work purposes and for the benefit of their patients. Staff nurses highlighted the absence of hospital-provided mobile phones as a key reason for using personal mobile phones at work. Charge nurses and nurse managers also influenced staff nurses' use of personal mobile phones at work. Nurses could use their personal mobile phones at work for work purposes to enhance their clinical performance and improve patient care. Hospital administrators can leverage on nurses' use of personal mobile phones at work by formulating policies that consider both the benefits and potential drawbacks of mobile phone usage. Recommendations are made for the formulation of hospital policies to optimize the use of personal mobile phones of nurses at work. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Infrastructure for the Geospatial Web

NASA Astrophysics Data System (ADS)

Lake, Ron; Farley, Jim

Geospatial data and geoprocessing techniques are now directly linked to business processes in many areas. Commerce, transportation and logistics, planning, defense, emergency response, health care, asset management and many other domains leverage geospatial information and the ability to model these data to achieve increased efficiencies and to develop better, more comprehensive decisions. However, the ability to deliver geospatial data and the capacity to process geospatial information effectively in these domains are dependent on infrastructure technology that facilitates basic operations such as locating data, publishing data, keeping data current and notifying subscribers and others whose applications and decisions are dependent on this information when changes are made. This chapter introduces the notion of infrastructure technology for the Geospatial Web. Specifically, the Geography Markup Language (GML) and registry technology developed using the ebRIM specification delivered from the OASIS consortium are presented as atomic infrastructure components in a working Geospatial Web.

Status of Advanced Stitched Unitized Composite Aircraft Structures

NASA Technical Reports Server (NTRS)

Jegley, Dawn C.; Velicki, Alex

2013-01-01

NASA has created the Environmentally Responsible Aviation (ERA) Project to explore and document the feasibility, benefits and technical risk of advanced vehicle configurations and enabling technologies that will reduce the impact of aviation on the environment. A critical aspect of this pursuit is the development of a lighter, more robust airframe that will enable the introduction of unconventional aircraft configurations that have higher lift-to-drag ratios, reduced drag, and lower community noise levels. The primary structural concept being developed under the ERA project in the Airframe Technology element is the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept. This paper describes how researchers at NASA and The Boeing Company are working together to develop fundamental PRSEUS technologies that could someday be implemented on a transport size aircraft with high aspect ratio wings or unconventional shapes such as a hybrid wing body airplane design.

Teleconsultation with a developing country: student reported outcomes of learning.

PubMed

Foti, Megan K; Eleazar, Crystal; Furphy, Kimberly A

2014-01-01

This qualitative study explored the benefits of implementing (international) teleconsultation in a Master of Science in Occupational Therapy (MSOT) curriculum. Twenty-one students provided supervised teleconsultative services to individuals with disabilities in Guatemala and were responsible for completing assessments, setting goals, and providing resources to address goals and improve quality of life. Data were collected through student presentations and coded for relevant themes. Analysis revealed new learning in the areas of the occupational therapy process, cultural awareness, and technology. Three themes emerged: Increased Understanding of Awareness of and Challenges to Working with People of a Different Culture; Need for Adaptability and Flexibility as Practicing Clinicians; Emerging Role of Technology in Occupational Therapy. Based on results from this study, occupational therapy academicians should consider implementing similar programs into curricula and conduct related research in order to promote not only student learning, but also to advance the use of telehealth technology in occupational therapy practice.

Beyond the Baseline: Proceedings of the Space Station Evolution Symposium. Volume 1, Part 2; Space Station Freedom

NASA Technical Reports Server (NTRS)

1990-01-01

This report contains the individual presentations delivered at the Space Station Evolution Symposium in League City, Texas on February 6, 7, 8, 1990. Personnel responsible for Advanced Systems Studies and Advanced Development within the Space Station Freedom Program reported on the results of their work to date. Systems Studies presentations focused on identifying the baseline design provisions (hooks and scars) necessary to enable evolution of the facility to support changing space policy and anticipated user needs. Also emphasized were evolution configuration and operations concepts including on-orbit processing of space transfer vehicles. Advanced Development task managers discussed transitioning advanced technologies to the baseline program, including those near-term technologies which will enhance the safety and productivity of the crew and the reliability of station systems. Special emphasis was placed on applying advanced automation technology to ground and flight systems.

Obligatory Effort [Hishtadlut] as an Explanatory Model: A Critique of Reproductive Choice and Control.

PubMed

Teman, Elly; Ivry, Tsipy; Goren, Heela

2016-06-01

Studies on reproductive technologies often examine women's reproductive lives in terms of choice and control. Drawing on 48 accounts of procreative experiences of religiously devout Jewish women in Israel and the US, we examine their attitudes, understandings and experiences of pregnancy, reproductive technologies and prenatal testing. We suggest that the concept of hishtadlut-"obligatory effort"-works as an explanatory model that organizes Haredi women's reproductive careers and their negotiations of reproductive technologies. As an elastic category with negotiable and dynamic boundaries, hishtadlut gives ultra-orthodox Jewish women room for effort without the assumption of control; it allows them to exercise discretion in relation to medical issues without framing their efforts in terms of individual choice. Haredi women hold themselves responsible for making their obligatory effort and not for pregnancy outcomes. We suggest that an alternative paradigm to autonomous choice and control emerges from cosmological orders where reproductive duties constitute "obligatory choices."

Bioelectrical impedance methods in clinical research: a follow-up to the NIH Technology Assessment Conference.

PubMed

Ellis, K J; Bell, S J; Chertow, G M; Chumlea, W C; Knox, T A; Kotler, D P; Lukaski, H C; Schoeller, D A

1999-01-01

In 1994, the National Institutes of Health (NIH) convened a Technology Assessment Conference "to provide physicians with a responsible assessment of bioelectrical impedance analysis (BIA) technology for body composition measurement." In 1997, Serono Symposia USA, Inc., organized an invited panel of scientists and clinicians, with extensive research and clinical experience with BIA, to provide an update. Panel members presented reviews based on their own work and published studies for the intervening years. Updates were provided on the single and multifrequency BIA methods and models; continued clinical research experiences; efforts toward establishing population reference norms; and the feasibility of establishing guidelines for potential diagnostic use of BIA in a clinical setting. This report provides a summary of the panel's findings including a consensus on several technical and clinical issues related to the research use of BIA, and those areas that are still in need of additional study.

Decisional style, mood and work communication: email diaries.

PubMed

Shirren, S; Phillips, J G

2011-10-01

To understand the use of technology to support interpersonal interaction, a theory of decisional style was applied to email use within the workplace. Previous research has used self-report and rating scales to address employee email behaviours, but this falls short of management's capability to monitor the actual behaviour. Thirty-nine employed individuals completed a five-day communication diary recording their actual behaviour upon receiving personal and work-related emails as well as the Melbourne Decision Making Questionnaire and the Depression Anxiety Stress Scales. It was found that vigilant individuals were more likely to use email in an efficient manner by deleting personal email and being less likely to open email later. Procrastinators, buckpassers and people experiencing high levels of negative affect were all more likely to delay dealing with email, which could be viewed as dealing with email in a less efficient manner. STATEMENT OF RELEVANCE: This work offers insights as to how people receive and process emails and is thus relevant to the development and implementation of collaborative technologies. Whilst other studies use individual's self-reports, this study uses a more accurate communication diary. Decisional style can predict the monitoring and response to electronic communication.

Evaluation of detection and response times of fire sensors using an atmospheric monitoring system

PubMed Central

Rowland, J.H.; Litton, C.D.; Thomas, R.A.

2017-01-01

Atmospheric monitoring systems (AMS) are required when using air from conveyor belt entries to ventilate working sections in U.S. underground coal mines. AMS technology has the potential to increase fire safety mine-wide, but research is needed to determine the detection and response times for fires of a variety of combustible materials. To evaluate the potential of an AMS for fire detection in other areas of a coal mine, a series of full-scale fire experiments were conducted to determine detection and response times from fires of different combustible materials that are found in U.S. underground coal mines, including high- and low-volatility coals, conveyor belts, brattice materials, different types of wood, diesel fuel, and a foam sealant. These experiments were conducted in the Safety Research Coal Mine (SRCM) of the U.S. National Institute for Occupational Safety and Health (NIOSH) located in Pittsburgh, PA, using a commercially available AMS that is typical of current technology. The results showed that through proper selection of sensors and their locations, a mine-wide AMS can provide sufficient early fire warning times and improve the health and safety of miners. PMID:28529442

Evaluation of detection and response times of fire sensors using an atmospheric monitoring system.

PubMed

Rowland, J H; Litton, C D; Thomas, R A

2016-01-01

Atmospheric monitoring systems (AMS) are required when using air from conveyor belt entries to ventilate working sections in U.S. underground coal mines. AMS technology has the potential to increase fire safety mine-wide, but research is needed to determine the detection and response times for fires of a variety of combustible materials. To evaluate the potential of an AMS for fire detection in other areas of a coal mine, a series of full-scale fire experiments were conducted to determine detection and response times from fires of different combustible materials that are found in U.S. underground coal mines, including high- and low-volatility coals, conveyor belts, brattice materials, different types of wood, diesel fuel, and a foam sealant. These experiments were conducted in the Safety Research Coal Mine (SRCM) of the U.S. National Institute for Occupational Safety and Health (NIOSH) located in Pittsburgh, PA, using a commercially available AMS that is typical of current technology. The results showed that through proper selection of sensors and their locations, a mine-wide AMS can provide sufficient early fire warning times and improve the health and safety of miners.

Understanding significant processes during work environment interventions to alleviate time pressure and associated sick leave of home care workers--a case study.

PubMed

Andersen, Gunn Robstad; Westgaard, Rolf H

2013-11-15

Ergonomic and work stress interventions rarely show long-term positive effect. The municipality participating in this study received orders from the Norwegian Labour Inspectorate due to an identified unhealthy level of time pressure, and responded by effectuating several work environment interventions. The study aim is to identify critical factors in the interaction between work environment interventions and independent rationalization measures in order to understand a potential negative interfering effect from concurrent rationalizations on a comprehensive work environment intervention. The study, using a historic prospective mixed-method design, comprised 6 home care units in a municipality in Norway (138 respondents, response rate 76.2%; 17 informants). The study included quantitative estimations, register data of sick leave, a time line of significant events and changes, and qualitative descriptions of employee appraisals of their work situation gathered through semi-structured interviews and open survey responses. The work environment interventions were in general regarded as positive by the home care workers. However, all units were simultaneously subjected to substantial contextual instability, involving new work programs, new technology, restructurings, unit mergers, and management replacements, perceived by the home care workers to be major sources of stress. Findings suggest that concurrent changes induced through rationalization resulted in negative exposure effects that negated positive work environment intervention effects, causing an overall deteriorated work situation for the home care workers. Establishment and active utilization of communication channels from workers to managers are recommended in order to increase awareness of putative harmful and interruptive effects of rationalization measures.

Understanding significant processes during work environment interventions to alleviate time pressure and associated sick leave of home care workers – a case study

PubMed Central

2013-01-01

Background Ergonomic and work stress interventions rarely show long-term positive effect. The municipality participating in this study received orders from the Norwegian Labour Inspectorate due to an identified unhealthy level of time pressure, and responded by effectuating several work environment interventions. The study aim is to identify critical factors in the interaction between work environment interventions and independent rationalization measures in order to understand a potential negative interfering effect from concurrent rationalizations on a comprehensive work environment intervention. Methods The study, using a historic prospective mixed-method design, comprised 6 home care units in a municipality in Norway (138 respondents, response rate 76.2%; 17 informants). The study included quantitative estimations, register data of sick leave, a time line of significant events and changes, and qualitative descriptions of employee appraisals of their work situation gathered through semi-structured interviews and open survey responses. Results The work environment interventions were in general regarded as positive by the home care workers. However, all units were simultaneously subjected to substantial contextual instability, involving new work programs, new technology, restructurings, unit mergers, and management replacements, perceived by the home care workers to be major sources of stress. Findings suggest that concurrent changes induced through rationalization resulted in negative exposure effects that negated positive work environment intervention effects, causing an overall deteriorated work situation for the home care workers. Conclusions Establishment and active utilization of communication channels from workers to managers are recommended in order to increase awareness of putative harmful and interruptive effects of rationalization measures. PMID:24238560

Robonaut: a robot designed to work with humans in space

NASA Technical Reports Server (NTRS)

Bluethmann, William; Ambrose, Robert; Diftler, Myron; Askew, Scott; Huber, Eric; Goza, Michael; Rehnmark, Fredrik; Lovchik, Chris; Magruder, Darby

2003-01-01

The Robotics Technology Branch at the NASA Johnson Space Center is developing robotic systems to assist astronauts in space. One such system, Robonaut, is a humanoid robot with the dexterity approaching that of a suited astronaut. Robonaut currently has two dexterous arms and hands, a three degree-of-freedom articulating waist, and a two degree-of-freedom neck used as a camera and sensor platform. In contrast to other space manipulator systems, Robonaut is designed to work within existing corridors and use the same tools as space walking astronauts. Robonaut is envisioned as working with astronauts, both autonomously and by teleoperation, performing a variety of tasks including, routine maintenance, setting up and breaking down worksites, assisting crew members while outside of spacecraft, and serving in a rapid response capacity.

Robonaut: a robot designed to work with humans in space.

PubMed

Bluethmann, William; Ambrose, Robert; Diftler, Myron; Askew, Scott; Huber, Eric; Goza, Michael; Rehnmark, Fredrik; Lovchik, Chris; Magruder, Darby

2003-01-01

The Robotics Technology Branch at the NASA Johnson Space Center is developing robotic systems to assist astronauts in space. One such system, Robonaut, is a humanoid robot with the dexterity approaching that of a suited astronaut. Robonaut currently has two dexterous arms and hands, a three degree-of-freedom articulating waist, and a two degree-of-freedom neck used as a camera and sensor platform. In contrast to other space manipulator systems, Robonaut is designed to work within existing corridors and use the same tools as space walking astronauts. Robonaut is envisioned as working with astronauts, both autonomously and by teleoperation, performing a variety of tasks including, routine maintenance, setting up and breaking down worksites, assisting crew members while outside of spacecraft, and serving in a rapid response capacity.

KSC Tech Transfer News, Volume 5, No. 1

NASA Technical Reports Server (NTRS)

Buckingham, Bruce (Editor)

2012-01-01

In October 2011, the White House released a presidential memorandum titled "Accelerating Technology Transfer and Commercialization of Federal Research in Support of High-Growth Businesses." It emphasized the importance of technology transfer as a driver of successful innovation to fuel economic growth, create jobs, and make U.S. industries more competitive in a global market. In response to this memorandum, NASA developed a 5-year plan for accelerating its own technology transfer activities. This plan outlines key objectives for enhancing NASA's ability to increase the rate, volume, and quality of technology transfers to industry, academia, and other Government agencies. By doing so, we are increasing the economic impact and public benefit of Federal technology investments. In addition, NASA established technology transfer as a key element of one of its Agency High Priority Performance Goals: "Enable bold new missions and make new technologies available to Government agencies and U.S. industry."What does this mean to you? In the broadest sense, NASA defines technology transfer as the utilization of NASA's technological assets- technologies, innovations, unique facilities and equipment, and technical expertise- by public and private sectors to benefit the Nation. So, if your job involves developing new technologies, writing new software, creating innovative ways to do business, performing research, or developing new technical capabilities, you could be contributing to Kennedy Space Center's (KSC) technology transfer activities by creating the technological assets that may one day be used by external partners. Furthermore, anytime you provide technical expertise to external partners, you're participating in technology transfer. The single most important step you can take to support the technology transfer process is to report new technologies and innovations ro the Technology Transfer Office. This is the critical first step in fueling the technology transfer pipeline. This is also a requirement for all Federal employees (see NPD 2091.1 B) and most NASA contractors. Detailed information on when, where, and how ro report new technology is provided on the following page. In addition, it's important that all detailed-oriented discussions about technology between NASA and external partners are documented or that they occur under formal agreements such as Space Act Agreements and Nondisclosure Agreements. Our office can assist you in putting these agreements into place, protecting NASA's interests, and providing the means to accurately measure the Agency's technology transfer activities. Technology transfer is everyone's responsibility. We need your help to ensure that NASA remains the leader in Federal technology transfer, and that the great work done at KSC provides the maximum economic and societal benefit to the Nation.

The use of information and communication technologies to support working carers of older people - a qualitative secondary analysis.

PubMed

Andersson, Stefan; Magnusson, Lennart; Hanson, Elizabeth

2016-03-01

Family care support services have mainly focused on older spousal carers of older people and have largely overlooked working carers, whom combine paid work with informal/family care responsibilities. Recently, however, information and communication technology (ICT) systems have been identified as a potentially flexible way of supporting working carers. The aim of this study was to describe nursing and support staff's experiences of using ICT for information, e-learning and support of working carers of older people. The study employed a descriptive, qualitative approach conducting a qualitative secondary analysis of two original data sets. In total, seventeen professional staff members from two municipal family carer support units in Sweden that had implemented ICTs were interviewed using a semi-structured interview guide consisting of open-ended questions. Two data sets were merged using latent qualitative content analysis. Secondary analysis produced three subthemes and an overall theme, a virtual road as a carriageway for the support of working carers, consisting of both enabling and hindering aspects in family support. This theme provides access points in both directions and is based on caring instruments that enable nursing staff's support role. The staff's sustainability and ability to support is influenced by caring opportunities and barriers. The findings suggest the ICTs to be flexible structures that provided nursing staff with a means and method to support working carers of older people. To overcome barriers to its use, measures to optimise support for working carers and the older person are needed. The use of ICTs provides nurses with a means to offer support to working carers of older people and enables carers to be informed, to learn and to share their burdens with others when caring for an older family member. © 2015 John Wiley & Sons Ltd.

An ontology of geo-reasoning to support medical response to attacks with weapons of mass destruction.

PubMed

Kirsh, David; Peterson, Nichole; Lenert, Leslie A

2005-01-01

We study how Metropolitan Medical Response System units conceptualize the physical space of a disaster and their organized response. Using a variety of ethnographic methods before, during, and after a disaster drill, we have developed an initial ontology for geospatial and context-aware technology. The conceptual map of first responders is far more complex than a geographical map. Zones and Areas are used to describe documented concepts critical to MMRS operations. Ad hoc locations also play a critical role, helping first responders communicate tactics in spatial terms. Such distinctions play an important role in the way our experts think about their activity. Successful geoaware alerting systems must incorporate these notions if they are to seamlessly fit into the work flow of first responders.

Mechanisation and automation technologies development in work at construction sites

NASA Astrophysics Data System (ADS)

Sobotka, A.; Pacewicz, K.

2017-10-01

Implementing construction work that creates buildings is a very complicated and laborious task and requires the use of various types of machines and equipment. For years there has been a desire for designers and technologists to introduce devices that replace people’s work on machine construction, automation and even robots. Technologies for building construction are still being developed and implemented to limit people’s hard work and improve work efficiency and quality in innovative architectonical and construction solutions. New opportunities for improving work on the construction site include computerisation of technological processes and construction management for projects and processes. The aim of the paper was to analyse the development of mechanisation, automation and computerisation of construction processes and selected building technologies, with special attention paid to 3D printing technology. The state of mechanisation of construction works in Poland and trends in its development in construction technologies are presented. These studies were conducted on the basis of the available literature and a survey of Polish construction companies.

Sandia National Laboratories: National Security Missions: International

Science.gov Websites

Weapons Safety & Security Weapons Science & Technology Defense Systems & Assessments About Directed Research & Development Technology Deployment Centers Working With Sandia Working With Sandia Licensing & Technology Transfer Browse Technology Portfolios Technology Partnerships Business, Industry

Sandia National Laboratories: Sandia Enabled Communications and

Science.gov Websites

Weapons Safety & Security Weapons Science & Technology Defense Systems & Assessments About Directed Research & Development Technology Deployment Centers Working With Sandia Working With Sandia Licensing & Technology Transfer Browse Technology Portfolios Technology Partnerships Business, Industry

A new technology for manufacturing scheduling derived from space system operations

NASA Technical Reports Server (NTRS)

Hornstein, R. S.; Willoughby, J. K.

1993-01-01

A new technology for producing finite capacity schedules has been developed in response to complex requirements for operating space systems such as the Space Shuttle, the Space Station, and the Deep Space Network for telecommunications. This technology has proven its effectiveness in manufacturing environments where popular scheduling techniques associated with Materials Resources Planning (MRPII) and with factory simulation are not adequate for shop-floor work planning and control. The technology has three components. The first is a set of data structures that accommodate an extremely general description of a factory's resources, its manufacturing activities, and the constraints imposed by the environment. The second component is a language and set of software utilities that enable a rapid synthesis of functional capabilities. The third component is an algorithmic architecture called the Five Ruleset Model which accommodates the unique needs of each factory. Using the new technology, systems can model activities that generate, consume, and/or obligate resources. This allows work-in-process (WIP) to be generated and used; it permits constraints to be imposed or intermediate as well as finished goods inventories. It is also possible to match as closely as possible both the current factory state and future conditions such as promise dates. Schedule revisions can be accommodated without impacting the entire production schedule. Applications have been successful in both discrete and process manufacturing environments. The availability of a high-quality finite capacity production planning capability enhances the data management capabilities of MRP II systems. These schedules can be integrated with shop-floor data collection systems and accounting systems. Using the new technology, semi-custom systems can be developed at costs that are comparable to products that do not have equivalent functional capabilities and/or extensibility.

Analyzing the effects of human-aware motion planning on close-proximity human-robot collaboration.

PubMed

Lasota, Przemyslaw A; Shah, Julie A

2015-02-01

The objective of this work was to examine human response to motion-level robot adaptation to determine its effect on team fluency, human satisfaction, and perceived safety and comfort. The evaluation of human response to adaptive robotic assistants has been limited, particularly in the realm of motion-level adaptation. The lack of true human-in-the-loop evaluation has made it impossible to determine whether such adaptation would lead to efficient and satisfying human-robot interaction. We conducted an experiment in which participants worked with a robot to perform a collaborative task. Participants worked with an adaptive robot incorporating human-aware motion planning and with a baseline robot using shortest-path motions. Team fluency was evaluated through a set of quantitative metrics, and human satisfaction and perceived safety and comfort were evaluated through questionnaires. When working with the adaptive robot, participants completed the task 5.57% faster, with 19.9% more concurrent motion, 2.96% less human idle time, 17.3% less robot idle time, and a 15.1% greater separation distance. Questionnaire responses indicated that participants felt safer and more comfortable when working with an adaptive robot and were more satisfied with it as a teammate than with the standard robot. People respond well to motion-level robot adaptation, and significant benefits can be achieved from its use in terms of both human-robot team fluency and human worker satisfaction. Our conclusion supports the development of technologies that could be used to implement human-aware motion planning in collaborative robots and the use of this technique for close-proximity human-robot collaboration.

Organizational interventions in response to duty hour reforms

PubMed Central

2014-01-01

Background Changes in resident duty hours in Europe and North America have had a major impact on the internal organizational dynamics of health care organizations. This paper examines, and assesses the impact of, organizational interventions that were a direct response to these duty hour reforms. Methods The academic literature was searched through the SCOPUS database using the search terms “resident duty hours” and “European Working Time Directive,” together with terms related to organizational factors. The search was limited to English-language literature published between January 2003 and January 2012. Studies were included if they reported an organizational intervention and measured an organizational outcome. Results Twenty-five articles were included from the United States (n = 18), the United Kingdom (n = 5), Hong Kong (n = 1), and Australia (n = 1). They all described single-site projects; the majority used post-intervention surveys (n = 15) and audit techniques (n = 4). The studies assessed organizational measures, including relationships among staff, work satisfaction, continuity of care, workflow, compliance, workload, and cost. Interventions included using new technologies to improve handovers and communications, changing staff mixes, and introducing new shift structures, all of which had varying effects on the organizational measures listed previously. Conclusions Little research has assessed the organizational impact of duty hour reforms; however, the literature reviewed demonstrates that many organizations are using new technologies, new personnel, and revised and innovative shift structures to compensate for reduced resident coverage and to decrease the risk of limited continuity of care. Future research in this area should focus on both micro (e.g., use of technology, shift changes, staff mix) and macro (e.g., culture, leadership support) organizational aspects to aid in our understanding of how best to respond to these duty hour reforms. PMID:25558915

Digital health now and in the future: Findings from a participatory design stakeholder workshop

PubMed Central

2017-01-01

Objectives While digital health technologies hold potential for improving healthcare and the generation and dissemination of health information, there are many issues to be resolved in facilitating their provision and efficacy and ensuring ethical management of personal health data. In the face of high-stakes digital health initiatives, debates and controversies, eliciting the views and experiences of the diverse constituents in the digital health ecosystem is important. Methods A digital health stakeholder workshop was held in Canberra, Australia, to address two key questions: 1) What is currently working and not working in digital health? and 2) Where should digital health go in the future? As part of a living lab approach, the 25 workshop participants from research, industry, patient and other healthcare consumer groups and government, engaged in participatory design activities directed at stimulating ideas and discussion. The design artefacts and videos generated during the workshop were thematically analysed. Results Digital health technologies offer valuable ways for healthcare consumers, providers, community groups and health industries to create and share information about health, medicine and healthcare. However, members of some social groups are currently excluded from full participation in the digital health ecosystem. Mechanisms for facilitating further consultation between the various stakeholders involved in digital health, including patients and carers, need to be established. The rights and responsibilities of the different stakeholders involved in connected digital health also need to be better identified and highlighted. At the same time, personal data privacy and security need protection. Conclusion Establishing the effective and responsible delivery of digital health technologies and collection, protection and sharing of health data is highly complex. Infrastructure, ethical and social issues need to be considered. PMID:29942616

Safety Oversight of Decommissioning Activities at DOE Nuclear Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zull, Lawrence M.; Yeniscavich, William

2008-01-15

The Defense Nuclear Facilities Safety Board (Board) is an independent federal agency established by Congress in 1988 to provide nuclear safety oversight of activities at U.S. Department of Energy (DOE) defense nuclear facilities. The activities under the Board's jurisdiction include the design, construction, startup, operation, and decommissioning of defense nuclear facilities at DOE sites. This paper reviews the Board's safety oversight of decommissioning activities at DOE sites, identifies the safety problems observed, and discusses Board initiatives to improve the safety of decommissioning activities at DOE sites. The decommissioning of former defense nuclear facilities has reduced the risk of radioactive materialmore » contamination and exposure to the public and site workers. In general, efforts to perform decommissioning work at DOE defense nuclear sites have been successful, and contractors performing decommissioning work have a good safety record. Decommissioning activities have recently been completed at sites identified for closure, including the Rocky Flats Environmental Technology Site, the Fernald Closure Project, and the Miamisburg Closure Project (the Mound site). The Rocky Flats and Fernald sites, which produced plutonium parts and uranium materials for defense needs (respectively), have been turned into wildlife refuges. The Mound site, which performed R and D activities on nuclear materials, has been converted into an industrial and technology park called the Mound Advanced Technology Center. The DOE Office of Legacy Management is responsible for the long term stewardship of these former EM sites. The Board has reviewed many decommissioning activities, and noted that there are valuable lessons learned that can benefit both DOE and the contractor. As part of its ongoing safety oversight responsibilities, the Board and its staff will continue to review the safety of DOE and contractor decommissioning activities at DOE defense nuclear sites.« less

Creating a virtual community of practice to investigate legitimate peripheral participation by African American middle school girls in science activities

NASA Astrophysics Data System (ADS)

Edwards, Leslie D.

How do teenage girls develop an interest in science? What kinds of opportunities can science teachers present to female students that support their engagement with learning science? I studied one aspect of this issue by focusing on ways students could use science to enhance or gain identities that they (probably) already valued. To do that I created technology-rich activities and experiences for an after school class in science and technology for middle school girls who lived in a low socio-economic urban neighborhood. These activities and experiences were designed to create a virtual community of practice whose members used science in diverse ways. Student interest was made evident in their responses to the activities. Four conclusions emerged. (1) Opportunities to learn about the lives and work of admired African American business women interested students in learning by linking it to their middle-class aspirations and their interest in things that money and status can buy. (2) Opportunities to learn about the lives and work of African American women experts in science in a classroom context where students then practiced similar kinds of actual scientific tasks engaged students in relations of legitimate peripheral participation in a virtual and diverse community of practice focused on science which was created in the after-school classes. (3) Opportunities where students used science to show off for family, friends, and supporters of the after-school program, identities they valued, interested them enough that they engaged in long-term science and technology projects that required lots of revisions. (4) In response to the opportunities presented, new and enhanced identities developed around becoming a better student or becoming some kind of scientist.

Organizational interventions in response to duty hour reforms.

PubMed

Law, Madelyn P; Orlando, Elaina; Baker, G Ross

2014-01-01

Changes in resident duty hours in Europe and North America have had a major impact on the internal organizational dynamics of health care organizations. This paper examines, and assesses the impact of, organizational interventions that were a direct response to these duty hour reforms. The academic literature was searched through the SCOPUS database using the search terms "resident duty hours" and "European Working Time Directive," together with terms related to organizational factors. The search was limited to English-language literature published between January 2003 and January 2012. Studies were included if they reported an organizational intervention and measured an organizational outcome. Twenty-five articles were included from the United States (n=18), the United Kingdom (n=5), Hong Kong (n=1), and Australia (n=1). They all described single-site projects; the majority used post-intervention surveys (n=15) and audit techniques (n=4). The studies assessed organizational measures, including relationships among staff, work satisfaction, continuity of care, workflow, compliance, workload, and cost. Interventions included using new technologies to improve handovers and communications, changing staff mixes, and introducing new shift structures, all of which had varying effects on the organizational measures listed previously. Little research has assessed the organizational impact of duty hour reforms; however, the literature reviewed demonstrates that many organizations are using new technologies, new personnel, and revised and innovative shift structures to compensate for reduced resident coverage and to decrease the risk of limited continuity of care. Future research in this area should focus on both micro (e.g., use of technology, shift changes, staff mix) and macro (e.g., culture, leadership support) organizational aspects to aid in our understanding of how best to respond to these duty hour reforms.

NASA Integrated Systems Research with an Environmental Focus

NASA Technical Reports Server (NTRS)

Wolfe, Jean; Collier, Fay

2010-01-01

This slide presentation reviews the Integrated Systems Research Program (ISRP) with a focus on the work being done on reduction of environmental impact from aeronautics. The focus of the ISRP is to Conduct research at an integrated system-level on promising concepts and technologies and explore, assess, or demonstrate the benefits in a relevant environment. The presentation reviews the criteria for an ISRP project, and discusses the Environmentally Responsible Aviation (ERA) project, and the technical challenges.

Qubit-Based Memcapacitors and Meminductors

NASA Astrophysics Data System (ADS)

Shevchenko, Sergey N.; Pershin, Yuriy V.; Nori, Franco

2016-07-01

It is shown that superconducting charge and flux quantum bits (qubits) can be classified as memory capacitive and inductive systems, respectively. We demonstrate that such memcapacitive and meminductive devices offer remarkable and rich response functionalities. In particular, when subjected to periodic input, qubit-based memcapacitors and meminductors exhibit unusual hysteresis curves. Our work not only extends the set of known memcapacitive and meminductive systems to qubit-based devices, but also highlights their unique properties potentially useful for future technological applications.

The house of the future

ScienceCinema

None

2017-12-09

Learn what it will take to create tomorrow's net-zero energy home as scientists reveal the secrets of cool roofs, smart windows, and computer-driven energy control systems. The net-zero energy home: Scientists are working to make tomorrow's homes more than just energy efficient -- they want them to be zero energy. Iain Walker, a scientist in the Lab's Energy Performance of Buildings Group, will discuss what it takes to develop net-zero energy houses that generate as much energy as they use through highly aggressive energy efficiency and on-site renewable energy generation. Talking back to the grid: Imagine programming your house to use less energy if the electricity grid is full or price are high. Mary Ann Piette, deputy director of Berkeley Lab's building technology department and director of the Lab's Demand Response Research Center, will discuss how new technologies are enabling buildings to listen to the grid and automatically change their thermostat settings or lighting loads, among other demands, in response to fluctuating electricity prices. The networked (and energy efficient) house: In the future, your home's lights, climate control devices, computers, windows, and appliances could be controlled via a sophisticated digital network. If it's plugged in, it'll be connected. Bruce Nordman, an energy scientist in Berkeley Lab's Energy End-Use Forecasting group, will discuss how he and other scientists are working to ensure these networks help homeowners save energy.

Influence of the Substrate on the Formation of Metallic Glass Coatings by Cold Gas Spraying

NASA Astrophysics Data System (ADS)

Henao, John; Concustell, Amadeu; Dosta, Sergi; Cinca, Núria; Cano, Irene G.; Guilemany, Josep M.

2016-06-01

Cold gas spray technology has been used to build up coatings of Fe-base metallic glass onto different metallic substrates. In this work, the effect of the substrate properties on the viscoplastic response of metallic glass particles during their impact has been studied. Thick coatings with high deposition efficiencies have been built-up in conditions of homogeneous flow on substrates such as Mild Steel AISI 1040, Stainless Steel 316L, Inconel 625, Aluminum 7075-T6, and Copper (99.9%). Properties of the substrate have been identified to play an important role in the viscoplastic response of the metallic glass particles at impact. Depending on the process gas conditions, the impact morphologies show not only inhomogeneous deformation but also homogeneous plastic flow despite the high strain rates, 108 to 109 s-1, involved in the technique. Interestingly, homogenous deformation of metallic glass particles is promoted depending on the hardness and the thermal diffusivity of the substrate and it is not exclusively a function of the kinetic energy and the temperature of the particle at impact. Coating formation is discussed in terms of fundamentals of dynamics of undercooled liquids, viscoplastic flow mechanisms of metallic glasses, and substrate properties. The findings presented in this work have been used to build up a detailed scheme of the deposition mechanism of metallic glass coatings by the cold gas spraying technology.

The house of the future

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Learn what it will take to create tomorrow's net-zero energy home as scientists reveal the secrets of cool roofs, smart windows, and computer-driven energy control systems. The net-zero energy home: Scientists are working to make tomorrow's homes more than just energy efficient -- they want them to be zero energy. Iain Walker, a scientist in the Lab's Energy Performance of Buildings Group, will discuss what it takes to develop net-zero energy houses that generate as much energy as they use through highly aggressive energy efficiency and on-site renewable energy generation. Talking back to the grid: Imagine programming your house tomore » use less energy if the electricity grid is full or price are high. Mary Ann Piette, deputy director of Berkeley Lab's building technology department and director of the Lab's Demand Response Research Center, will discuss how new technologies are enabling buildings to listen to the grid and automatically change their thermostat settings or lighting loads, among other demands, in response to fluctuating electricity prices. The networked (and energy efficient) house: In the future, your home's lights, climate control devices, computers, windows, and appliances could be controlled via a sophisticated digital network. If it's plugged in, it'll be connected. Bruce Nordman, an energy scientist in Berkeley Lab's Energy End-Use Forecasting group, will discuss how he and other scientists are working to ensure these networks help homeowners save energy.« less

Photoperiodic Diapause and the Establishment of Aedes albopictus (Diptera: Culicidae) in North America

PubMed Central

2016-01-01

The invasion and range expansion of Aedes albopictus (Skuse) in North America represents an outstanding opportunity to study processes of invasion, range expansion, and climatic adaptation. Furthermore, knowledge obtained from such research is relevant to developing novel strategies to control this important vector species. Substantial evidence indicates that the photoperiodic diapause response is an important adaptation to climatic variation across the range of Ae. albopictus in North America. Photoperiodic diapause is a key determinant of abundance in both space and time, and the timing of entry into and exit out of diapause strongly affects seasonal population dynamics and thus the potential for arbovirus transmission. Emerging genomic technologies are making it possible to develop high-resolution, genome-wide genetic markers that can be used for genetic mapping of traits relevant to disease transmission and phylogeographic studies to elucidate invasion history. Recent work using next-generation sequencing technologies (e.g., RNA-seq), combined with physiological experiments, has provided extensive insight into the transcriptional basis of the diapause response in Ae. albopictus. Applying this knowledge to identify novel targets for vector control represents an important future challenge. Finally, recent studies have begun to identify traits other than diapause that are affected by photoperiodism. Extending this work to identify additional traits influenced by photoperiod should produce important insights into the seasonal biology of Ae. albopictus. PMID:27354438

Success Stories in Control: Nonlinear Dynamic Inversion Control

NASA Technical Reports Server (NTRS)

Bosworth, John T.

2010-01-01

NASA plays an important role in advancing the state of the art in flight control systems. In the case of Nonlinear Dynamic Inversion (NDI) NASA supported initial implementation of the theory in an aircraft and demonstration in a space vehicle. Dr. Dale Enns of Honeywell Aerospace Advanced Technology performed this work in cooperation with NASA and under NASA contract. Honeywell and Lockheed Martin were subsequently contracted by AFRL to create "Design Guidelines for Multivariable Control Theory". This foundational work directly contributed to the advancement of the technology and the credibility of the control law as a design option. As a result Honeywell collaborated with Lockheed Martin to produce a Nonlinear Dynamic Inversion controller for the X-35 and subsequently Lockheed Martin did the same for the production Lockheed Martin F-35 vehicle. The theory behind NDI is to use a systematic generalized approach to controlling a vehicle. Using general aircraft nonlinear equations of motion and onboard aerodynamic, mass properties, and engine models specific to the vehicle, a relationship between control effectors and desired aircraft motion can be formulated. Using this formulation a control combination is used that provides a predictable response to commanded motion. Control loops around this formulation shape the response as desired and provide robustness to modeling errors. Once the control law is designed it can be used on a similar class of vehicle with only an update to the vehicle specific onboard models.

Citation measures in stereotactic radiosurgery: publication across a discipline.

PubMed

Kondziolka, Douglas

2011-01-01

It is possible to judge the impact of scientific research by the number of citations a publication has received. We identified the most cited works in the field of stereotactic radiosurgery to study the evolution of this field from the perspective of publication. A Web of Science search was performed for articles that included the word 'radiosurgery' in the title. We studied the reports with >100 citations. A total of 5,532 published works were available for study between 1951 and 2010. Eighty-five articles had ≥ 100 citations, and these were published in 19 separate journals. The majority were published in the International Journal of Radiation Oncology, Biology and Physics, the Journal of Neurosurgery and Neurosurgery. The most common topics included brain metastasis management (n = 20), arteriovenous malformations (n = 17), vestibular schwannomas (n = 9), technologies (n = 9), meningiomas (n = 8) and dose response/radiobiology (n = 6). Fifty-seven percent of the articles were published in the last 10 years. The first radiosurgery report by Leksell (1951) initiated the field. The 1980s were a period of new technology development followed in the 1990s by introductory articles on specific indications that consisted mainly of retrospective case series. More sophisticated higher level evidence reports were published in the last decade. The most significant works in radiosurgery include initial technology descriptions, multicenter studies with large numbers of patients, randomized clinical trials and reports that provide dose prescription guidelines. Copyright © 2011 S. Karger AG, Basel.

Considering employee needs during a catastrophe requires innovative recovery plans: Why traditional workplace recovery solutions are outdated.

PubMed

Sullivan, Joe

2017-01-01

Mobile technology has changed the way we live and operate, with co-working, flexible spaces and home office solutions that offer us the freedom to work when and where we choose. However, when disaster strikes the workplace, people are often the last to be considered in the recovery process. This paper examines strategies for businesses and their employees to continue working after a disaster strikes. It explores the trends in the market, the benefits and drawbacks of different approaches and the attitudes of continuity experts and small business owners who have the responsibility to ensure that businesses, and people, continue to function, even when their main place of work is inaccessible. Informed by expertise and experience, this paper also draws on the extant literature, as well as bespoke research targeted at both continuity professionals and business decision-makers, to discover more about attitudes to disaster recovery.

Remote Sensing Laboratory - RSL

ScienceCinema

None

2018-01-16

One of the primary resources supporting homeland security is the Remote Sensing Laboratory, or RSL. The Laboratory creates advanced technologies for emergency response operations, radiological incident response, and other remote sensing activities. RSL emergency response teams are on call 24-hours a day, and maintain the capability to deploy domestically and internationally in response to threats involving the loss, theft, or release of nuclear or radioactive material. Such incidents might include Nuclear Power Plant accidents, terrorist incidents involving nuclear or radiological materials, NASA launches, and transportation accidents involving nuclear materials. Working with the US Department of Homeland Security, RSL personnel equip, maintain, and conduct training on the mobile detection deployment unit, to provide nuclear radiological security at major national events such as the super bowl, the Indianapolis 500, New Year's Eve celebrations, presidential inaugurations, international meetings and conferences, just about any event where large numbers of people will gather.

Adaptive Back Sheet Material for Acoustic Liner Applications-ARMD Seedling Fund Phase I Final Report

NASA Technical Reports Server (NTRS)

Gerhold, Carl H.; Jones, Michael G.; Farrar, Dawnielle

2014-01-01

A recently developed piezo-electric composite film is evaluated for its usefulness in application in acoustic liners. Researchers at the NASA Langley Research Center Liner Technology Facility developed experiments to measure the electrical response of the material to acoustic excitation and the vibrational response of the material to electrical excitation. The robustness of the piezo-electric film was also assessed. The material's electrical response to acoustic excitation is found to be comparable to a commercial microphone in the range of frequencies from 500 to 3000 Hz. However, the vibrational response to electrical excitation in the frequency range of interest is an order of magnitude less than may be necessary for application to acoustic liners. Nevertheless, experimental results indicate that the potential exists for the material to produce a measurable change in the impedance spectrum of a liner. Work continues to improve the authority of the piezo-electric film.

Remote Sensing Laboratory - RSL

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2014-11-06

One of the primary resources supporting homeland security is the Remote Sensing Laboratory, or RSL. The Laboratory creates advanced technologies for emergency response operations, radiological incident response, and other remote sensing activities. RSL emergency response teams are on call 24-hours a day, and maintain the capability to deploy domestically and internationally in response to threats involving the loss, theft, or release of nuclear or radioactive material. Such incidents might include Nuclear Power Plant accidents, terrorist incidents involving nuclear or radiological materials, NASA launches, and transportation accidents involving nuclear materials. Working with the US Department of Homeland Security, RSL personnel equip,more » maintain, and conduct training on the mobile detection deployment unit, to provide nuclear radiological security at major national events such as the super bowl, the Indianapolis 500, New Year's Eve celebrations, presidential inaugurations, international meetings and conferences, just about any event where large numbers of people will gather.« less

Identifying and Eliminating Deficiencies in the General Surgery Resident Core Competency Curriculum.

PubMed

Tapia, Nicole M; Milewicz, Allen; Whitney, Stephen E; Liang, Michael K; Braxton, Carla C

2014-06-01

Although the Accreditation Council for Graduate Medical Education has defined 6 core competencies required of resident education, no consensus exists on best practices for reaching resident proficiency. Surgery programs must develop resourceful methods to incorporate learning. While patient care and medical knowledge are approached with formal didactics and traditional Halstedian educational formats, other core competencies are presumed to be learned on the job or emphasized in conferences. To test the hypothesis that our residents lack a foundation in several of the nonclinical core competencies and to seek to develop a formal curriculum that can be integrated into our current didactic time, with minimal effect on resident work hours and rest hours. Anonymous Likert-type scale needs assessment survey requesting residents within a large single general surgery residency program to rate their understanding, working knowledge, or level of comfort on the following 10 topics: negotiation and conflict resolution; leadership styles; health care legislation; principles of quality delivery of care, patient safety, and performance improvement; business of medicine; clinical practice models; role of advocacy in health care policy and government; personal finance management; team building; and roles of innovation and technology in health care delivery. Proportions of resident responses scored as positive (agree or strongly agree) or negative (disagree or strongly disagree). In total, 48 surgery residents (70%) responded to the survey. Only 3 topics (leadership styles, team building, and roles of innovation and technology in health care delivery) had greater than 70% positive responses, while 2 topics (negotiation and conflict resolution and principles of quality delivery of care, patient safety, and performance improvement) had greater than 60% positive responses. The remaining topics had less than 40% positive responses, with the least positive responses on the topics business of medicine (13% [6 of 48]) and health care legislation (19% [9 of 48]). General surgery residents in our program do not report being knowledgeable or comfortable with several areas of the nonclinical Accreditation Council for Graduate Medical Education core competencies. We developed a formal health care policy and management curriculum, with integration into preexisting protected surgical didactic time. This curriculum fulfills educational requirements, without negatively affecting resident work hours and without increased expense to the department of surgery. Future studies measuring the effect of this integrated program on resident education, knowledge, and satisfaction are warranted.

Portable Diagnostics Technology Assessment for Space Missions. Part 1; General Technology Capabilities for NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Nelson, Emily S.; Chait, Arnon

2010-01-01

The changes in the scope of NASA s mission in the coming decade are profound and demand nimble, yet insightful, responses. On-board clinical and environmental diagnostics must be available for both mid-term lunar and long-term Mars exploration missions in an environment marked by scarce resources. Miniaturization has become an obvious focus. Despite solid achievements in lab-based devices, broad-based, robust tools for application in the field are not yet on the market. The confluence of rapid, wide-ranging technology evolution and internal planning needs are the impetus behind this work. This report presents an analytical tool for the ongoing evaluation of promising technology platforms based on mission- and application-specific attributes. It is not meant to assess specific devices, but rather to provide objective guidelines for a rational down-select of general categories of technology platforms. In this study, we have employed our expertise in the microgravity operation of fluidic devices, laboratory diagnostics for space applications, and terrestrial research in biochip development. A rating of the current state of technology development is presented using the present tool. Two mission scenarios are also investigated: a 30-day lunar mission using proven, tested technology in 5 years; and a 2- to 3-year mission to Mars in 10 to 15 years.

NASA technology applications team: Applications of aerospace technology

NASA Technical Reports Server (NTRS)

1993-01-01

This report covers the activities of the Research Triangle Institute (RTI) Technology Applications Team for the period 1 October 1992 through 30 September 1993. The work reported herein was supported by the National Aeronautics and Space Administration (NASA), Contract No. NASW-4367. Highlights of the RTI Applications Team activities over the past year are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. Appendix B includes Technology Opportunity Announcements and Spinoff! Sheets prepared by the Team while Appendix C contains a series of technology transfer articles prepared by the Team.

Technology-enhanced focus groups as a component of instrument development.

PubMed

Strout, Tania D; DiFazio, Rachel L; Vessey, Judith A

2017-06-22

Background Bullying is a critical public health problem and a screening tool for use in healthcare is needed. Focus groups are a common tool for generating qualitative data when developing an instrument and evidence suggests that technology-enhanced focus groups can be effective in simultaneously engaging participants from diverse settings. Aim To examine the use of technology-enhanced focus groups in generating an item pool to develop a youth-bullying screening tool. Discussion The authors explore methodological and ethical issues related to conducting technology-enhanced focus groups, drawing on their experience in developing a youth-bullying measure. They conducted qualitative focus groups with professionals from the front lines of bullying response and intervention. They describe the experience of conducting technology-enhanced focus group sessions, focusing on the methodological and ethical issues that researchers engaging in similar work may encounter. Challenges associated with this methodology include establishing rapport among participants, privacy concerns and limited non-verbal communication. Conclusion The use of technology-enhanced focus groups can be valuable in obtaining rich data from a wide variety of disciplines and contexts. Organising these focus groups was inexpensive and preferred by the study's participants. Implications for practice Researchers should consider using technology-enhanced focus groups to generate data to develop health-related measurement tools.

The technology management process at the European space agency

NASA Astrophysics Data System (ADS)

Guglielmi, M.; Williams, E.; Groepper, P.; Lascar, S.

2010-03-01

Technology is developed at the European Space Agency (ESA) under several programmes: corporate and domain specific, mandatory and optional, with different time horizons and covering different levels of the TRL scale. To improve the transparency and efficiency of the complete process, it was felt necessary to establish an agreed end to end process for the management of all technology R&D activity that could: Include all ESA programmes and consider the requirements of European users Lead to coordinated multi-year work plan and yearly procurement plans Prepare and enable future European space programmes Be harmonized with national initiatives in Europe Thereby establishing the basis for a product policy to reduce risks to technology users, reduce costs and delays, and enhance industrial competitiveness and non-dependence. In response to the above needs, ESA has developed a technology management process called the ESA End-to-End process (E2E), from establishment of the strategy to the monitoring and evaluation of R&D results. In this paper, the complete process will be described in detail including a discussion on its strengths and limitations, and its links to the wider European Harmonization process. The paper will be concluded with the introduction of the ESA Technology Tree: a basic tool to structure and facilitate communication about technology issues.

Socio-Technical Considerations for the Use of Blockchain Technology in Healthcare.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Nøhr, Christian

2018-01-01

Blockchain technology is often considered as the fourth industrial revolution that will change the world. The enthusiasm of the transformative nature of blockchain technology has infiltrated healthcare. Blockchain is often seen as the much needed and perfect technology for healthcare, addressing the difficult and complex issues of security and inter-operability. More importantly, the "value" and trust-based system can deliver automated action and response via its smart contract mechanism. Healthcare, however, is a complex system. Health information technology (HIT) so far, has not delivered its promise of transforming healthcare due to its complex socio-technical and context sensitive interaction. The introduction of blockchain technology will need to consider a whole range of socio-technical issues in order to improve the quality and safety of patient care. This paper presents a discussion on these socio-technical issues. More importantly, this paper argues that in order to achieve the best outcome from blockchain technology, there is a need to consider a clinical transformation from "information" to "value " and trust. This paper argues that urgent research is needed to address these socio-technical issues in order to facilitate best outcomes for blockchain in healthcare. These socio-technical issues must then be further evaluated by means of working prototypes in the medical domain in coming years.

Summer Final Report

NASA Technical Reports Server (NTRS)

Makidi, Nitou

2012-01-01

The summer of 2012 has been filled with many memorable events and activities. As an intern, I had responsibilities that had to be fulfilled. My tour of duty was completed as an administrative student trainee in the Information Technology and Communications Services Business Office (IT-A). In accordance with the Business Objectives and Agreement of the Business Office and my performance plan, I was to provide business office support, improve business, project management, and technical work processes. With this being stated, I supported a project called "The Big Move Project" (TBMP), which will take course over the next several years. The Big Move Project is the planning of the Information Technology (IT) Directorate's relocation to various buildings in the course of upcoming years, when designs and the building of Central Campus have been completed. Working directly with my supervisor and the project manager, I was responsible for gathering both administrative and operational area requirements for the Information Technology (IT) Directorate, along with its outsourced support and contractors, such as IMCS, NICS, and ACES. My first action was to create rubrics that will serve as a guideline for the information that should be given by each branch of IT. After receiving that information via a few KAITS actions, I was able to start the consolidation process, and begin working on a presentation. A SharePoint was created shortly after for others to view the progression of the project, which I managed. During the consolidation ofthis information, I would occasionally present to the IT Deputy Director and IT Chiefs. The draft of this presentation was shown to employees of Center Operations (T A) and stakeholders-IT Chief Officers and contractor managers-in the relocation of IT to make them aware of what requirements must be met that will enable IT to be accommodated appropriately in the design of Central Campus Phase 11-the time in which IT and its contractors are scheduled to be relocated. Besides supporting TBMP, I also supported the Section 508 Policy Compliance Coordinator, R. Liang. Section 508 is a policy that requires employers to implement accessibility assurance of information and technology to disabled communities. On Thursday, July 19, 2012, I was able to go to Camp Boggy Creek-a camp for disabled children-for an education outreach, in collaboration with the Education Office. We shared with them information about how astronauts live and work in space, they were able to ride hovercrafts, build paper rockets, and then launch them outside. Although this outreach was quite fun with the kids at the camp, this was a learning opportunity to gain some insight to those with cognitive and physical disabilities, the problems they typically face, and in tum, how to accommodate those with disabilities in the work environment. In the process of implementing accessibility and Section 508 compliance, I attended various teleconferences, did field runs to supply closed-caption call phones to employees with limited hearing, and helped with the development of the charter ofthe Section 508 Compliance Working Group.

Transforming consumer health informatics through a patient work framework: connecting patients to context.

PubMed

Valdez, Rupa S; Holden, Richard J; Novak, Laurie L; Veinot, Tiffany C

2015-01-01

Designing patient-centered consumer health informatics (CHI) applications requires understanding and creating alignment with patients' and their family members' health-related activities, referred to here as 'patient work'. A patient work approach to CHI draws on medical social science and human factors engineering models and simultaneously attends to patients, their family members, activities, and context. A patient work approach extends existing approaches to CHI design that are responsive to patients' biomedical realities and personal skills and behaviors. It focuses on the embeddedness of patients' health management in larger processes and contexts and prioritizes patients' perspectives on illness management. Future research is required to advance (1) theories of patient work, (2) methods for assessing patient work, and (3) techniques for translating knowledge of patient work into CHI application design. Advancing a patient work approach within CHI is integral to developing and deploying consumer-facing technologies that are integrated with patients' everyday lives. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com. For numbered affiliations see end of article.

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

The knowledge in astronomy of the students of technology in industrial automation

NASA Astrophysics Data System (ADS)

Voelzke, Marcos Rincon; Capasso Moraes, Ataliba

2016-07-01

This work is part of a research of the academic Masters in Science in Education at the Cruzeiro do Sul University, in Brazil. It seeks to present the results of the survey conducted among students of the technology course in industrial automation at the Federal Institute São Paulo at the Campus Cubatão. In the first step, the students' lack of knowledge to the related primary concepts of Astronomy turned out. Correcting these deficiencies found, external to the program content, a Basic Course in Astronomy, containing dialogued or expository lectures with the aid of audiovisual resources and access to textbooks. Analysed the responses of this second step, it was found that students had a significant improvement in learning.

Analysis of knowledge in astronomy of the students of technology in industrial automation

NASA Astrophysics Data System (ADS)

Voelzke, Marcos Rincon; Capasso Moraes, Ataliba

2015-08-01

This work is part of a research of the academic Masters in Science in Education at the Cruzeiro do Sul University, in Brazil. It seeks to present the results of the survey conducted among students of the technology course in industrial automation at the Federal Institute São Paulo at the Campus Cubatão. In the first step, the students’ lack of knowledge to the related primary concepts of Astronomy turned out. Correcting these deficiencies found, external to the program content, a Basic Course in Astronomy, containing dialogued or expository lectures with the aid of audiovisual resources and access to textbooks. Analysed the responses of this second step, it was found that students had a significant improvement in learning.

Access to treatment for HIV in developing countries; statement from international seminar on access to treatment for HIV in developing countries, London, June 5 and 6, 1998. UK NGO AIDS Consortium Working Group on Access to Treatment for HIV in Developing Countries.

PubMed

1998-10-24

Compared with those in industrialised countries, people in developing countries have little access to treatment for HIV infection, or for many other diseases including cancer, tuberculosis, and malaria. Although attention has been paid to areas such as provision of essential drugs, strengthening of infrastructures and service delivery, human rights, and appropriate health technologies, great inequalities remain. The HIV epidemic has highlighted these differences, because technological advances and the response of people infected with HIV have enabled the sharing of experiences across regions and brought the contrast into focus.

Secondary Processors and Landfills — Partnerships that Work

NASA Astrophysics Data System (ADS)

Brewer, Ben; Roth, David J.

Using Best Available Technology is a phase that we often hear when there are environmental discussions on aluminum dross and secondary salt slag processing. The reality is best available technology is a mix between efficient removal of the valuable aluminum, oxides, misc metals and flux from dross and salt cake. This combined with conscientious land fill disposal of those items that finally, at this time, have no economic use is the reality of a company's best available actions. Recycling processes must be looked at with both the economic and environmental benefits weighed for their responsible implementation. This paper will discuss how this is done on a practical basis by Recycling Ventures (a secondary processor) and Environmental Waste Solutions (a Title II landfill), for the aluminum industry.

Superconducting Mixers for Far-Infrared Spectroscopy

NASA Technical Reports Server (NTRS)

Betz, A. L.; Boreiko, R. T.; Grossman, E. R.; Reintsema, C. D.; Ono, R. H.; Gerecht, E.

2002-01-01

The goal of this project was to fabricate and test planar arrays of superconducting mixers for the 2-6 THz band. The technology is intended for multi-beam receivers aboard Explorer-class missions and the SOFIA Airborne Observatory. The mixer technology is the superconducting transition-edge microbolometer, which is more commonly known as the Hot-Electron micro-Bolometer (HEB). As originally proposed, two superconducting technologies were to be developed: (1) low-Tc niobium HEBs which could approach quantum-noise-limited sensitivities but require cooling to 2- 4 K, and (2) high-Tc YBCO HEBs with sensitivities 10 times worse but with a relaxed cooling requirement of 30-60 K. The low-Tc devices would be best for astronomy applications on SOFIA, whereas the high-Tc devices would be more suitable for planetary missions using systems without stored cryogens. The work plan called for planar micro-fabrication and initial testing of HEB devices at the NIST Boulder clean-room facility. Subsequent assembly and RF testing of selected devices would be done at the CASA laboratory at U. Colorado. Approximately 1-year after work began on this project, Dr. Eyal Gerecht joined the NIST group, and assumed day-to-day responsibility for Nb-HEB development at NIST outside of micro-fabrication. The YBCO-HEB work was to be guided by Dr. Ron Ono, who was the NIST expert in YBCO technology. Unfortunately, recurrent health problems limited the time Ron could devote to the project in its first year. These problems became aggravated in early 2001, and sadly led to Ron's death in October, 2001. His loss was not only a blow to his friends and associates at NIST, but was mounted by the US superconductivity community at large. With his passing, work on high-Tc HEBs ceased at NIST. There was no one to replace him or his expertise. Our work subsequently shifted solely to Nb-HEB devices. In the sections which follow, our progress in the development of diffusion-cooled Nb-HEB mixers is detailed. To simplify the terminology, these devices will subsequently be called DHEB mixers to distinguish them from phonon-cooled devices (PHEBs).

Space Transportation System Technology Symposium. Volume 4; Propulsion

NASA Technical Reports Server (NTRS)

1970-01-01

The prospect of undertaking a reusable launch vehicle development led the NASA Office of Manned Space Flight (OMSF) to request the Office of Advanced Research and Technology (OART) to organize and direct a program to develop the technology that would aid in selecting the best system alternatives and that would support the ultimate development of an earth-to-orbit shuttle. Such a Space Transportation System Technology Program has been initiated. OART, OMSF, and NASA Flight and Research Centers with the considerable inputs of Department of Defense personnel have generated the program through the efforts of several Technology Working Groups and a Technology Steering Group. Funding and management of the recommended efforts is being accomplished through the normal OAR T and OMSF line management channels. The work is being done in government laboratories and under contract with industry and universities. Foreign nations have been invited to participate in this work as well. Substantial funding, from both OART and OMSF, was applied during the second half of fiscal year 1970. The Space Transportation System Technology Symposium held at the NASA Lewis Research Center, Cleveland, Ohio, July 15-17, 1970, was the first public report on that program. The Symposium goals were to consider the technology problems, their status, and the prospective program outlook for the benefit of the industry, government, university, and foreign participants considered to be contributors to the program. In addition, it offered an opportunity to identify the responsible individuals already engaged in the program. The Symposium sessions were intended to confront each presenter with his technical peers as listeners, and this, I believe, was substantially accomplished. Because of the high interest in the material presented, and also because the people who could edit the output are already deeply involved in other important tasks, we have elected to publish the material essentially as it was presented, utilizing mainly the illustrations used by the presenters along with brief words of explanation. Those who heard the presentations, and those who are technically astute in specialty areas, can probably put this story together again. We hope that more will be gained by compiling the information in this form now than by spending the time and effort to publish a more finished compendium later.

Space Transportation System Technology Symposium. Volume 7; Biotechnology

NASA Technical Reports Server (NTRS)

1970-01-01

The prospect of undertaking a reusable launch vehicle development led the NASA Office of Manned Space Flight (OMSF) to request the Office of Advanced Research and Technology (OART) to organize and direct a program to develop the technology that would aid in selecting the best system alternatives and that would support the ultimate development of an earth-to-orbit shuttle. Such a Space Transportation System Technology Program has been initiated. OART, OMSF, and NASA Flight and Research Centers with the considerable inputs of Department of Defense personnel have generated the program through the efforts of several Technology Working Groups and a Technology Steering Group. Funding and management of the recommended efforts is being accomplished through the normal OART and OMSF line management channels. The work is being done in government laboratories and under contract with industry and universities. Foreign nations have been invited to participate in this work as well. Substantial funding, from both OART and OMSF, was applied during the second half of fiscal year 1970. The Space Transportation System Technology Symposium held at the NASA Lewis Research Center, Cleveland, Ohio, July 15-17, 1970, was the first public report on that program. The Symposium goals were to consider the technology problems, their status, and the prospective program outlook for the benefit of the industry, government, university, and foreign participants considered to be contributors to the program. In addition, it offered an opportunity to identify the responsible individuals already engaged in the program. The Symposium sessions were intended to confront each presenter with his technical peers as listeners, and this, I believe, was substantially accomplished. Because of the high interest in the material presented, and also because the people who could edit the output are already deeply involved in other important tasks, we have elected to publish the material essentially as it was presented, utilizing mainly the illustrations used by the presenters along with brief words of explanation. Those who heard the presentations, and those who are technically astute in specialty areas, can probably put this story together again. We hope that more will be gained by compiling the information in this form now than by spending the time and effort to publish a more finished compendium later.

Space Transportation System Technology Symposium. Volume 5; Operations, Maintenance, and Safety (Including Cryogenic Systems)

NASA Technical Reports Server (NTRS)

1970-01-01

The prospect of undertaking a reusable launch vehicle development led the NASA Office of Manned Space Flight (OMSF) to request the Office of Advanced Research and Technology (OART) to organize and direct a program to develop the technology that would aid in selecting the best system alternatives and that would support the ultimate development of an earth-to-orbit shuttle. Such a Space Transportation System Technology Program has been initiated. OART, OMSF, and NASA Flight and Research Centers with the considerable inputs of Department of Defense personnel have generated the program through the efforts of several Technology Working Groups and a Technology Steering Group. Funding and management of the recommended efforts is being accomplished through the normal OART and OMSF line management channels. The work is being done in government laboratories and under contract with industry and universities. Foreign nations have been invited to participate in this work as well. Substantial funding, from both OART and OMSF, was applied during the second half of fiscal year 1970. The Space Transportation System Technology Symposium held at the NASA Lewis Research Center, Cleveland, Ohio, July 15-17, 1970, was the first public report on that program. The Symposium goals were to consider the technology problems, their status, and the prospective program outlook for the benefit of the industry, government, university, and foreign participants considered to be contributors to the program. In addition, it offered an opportunity to identify the responsible individuals already engaged in the program. The Symposium sessions were intended to confront each presenter with his technical peers as listeners, and this, I believe, was substantially accomplished. Because of the high interest in the material presented, and also because the people who could edit the output are already deeply involved in other important tasks, we have elected to publish the material essentially as it was presented, utilizing mainly the illustrations used by the presenters along with brief words of explanation. Those who heard the presentations, and those who are technically astute in specialty areas, can probably put this story together again. We hope that more will be gained by compiling the information in this form now than by spending the time and effort to publish a more finished compendium later.

TERRA-KLEEN RESPONSE GROUP, INC. SOLVENT EXTRACTION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

This report summarizes the results of a field demonstration conducted under the SITE program. The technology which was demonstrated was a solvent extraction technology developed by Terra-Kleen Response Group. Inc. to remove organic contaminants from soil. The technology employs...

E-Technology and Work/Life Balance for Academics with Young Children

ERIC Educational Resources Information Center

Currie, Jan; Eveline, Joan

2011-01-01

Since the late 1980s, research on post-industrialized economies shows that the boundary between work and family is increasingly becoming blurred. The continuing evolution of e-technology allows work for some to be done anywhere, anytime. This article examines the degree to which e-technology has transferred work into the home lives of academics…

Milestone Report:3.2.2.26 Appliances, HVAC & Water Heating R&D-Select Sorption Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ally, Moonis Raza

The purpose of this report is to select a sorption technology based on recent work completed on characterizing working pairs for both absorption and adsorption technologies based on Global Warming Potential (GWP) of less than 100 (relative to carbon dioxide, 100-year atmospheric life span) and zero Ozone Depletion Potential (ODP). From a total of eighty-three potential working pairs (absorption technology), there were only two candidate working pairs for the absorption technology, and 8 potential working pairs for adsorption technology. After screening these ten potential candidates on the basis of sizes of the desorber, absorber/adsorber, evaporator, condenser, and rectifier (where applicable),more » the ORNL-Georgia Tech study concluded that best working pairs are NH3-H2O for the most compact system in terms of heat transfer equipment surface area, and NH3-LiNO3 and MeOH-[mmin][DMP] where efficiency is most important. Based on a single-stage absorption and adsorption modeling using the Engineering Equation Solver (EES), the performance of both sorption systems was evaluated from known heat transfer correlations, and thermos-physical properties. Based on these results, the technology chosen is absorption technology. The selected technology is absorption for the reasons cited in Section 4.« less

Composite Fuselage Technology

NASA Technical Reports Server (NTRS)

Lagace, Paul A.

1999-01-01

Work was conducted over a ten-year period to address the central issue of damage in primary load-bearing aircraft composite structure, specifically fuselage structure. This included the three facets of damage resistance, damage tolerance, and damage arrest. Experimental, analytical, and numerical work was conducted in order to identify and better understand the mechanisms that control the structural behavior of fuselage structures in their response to the three aspects of damage. Furthermore, work was done to develop straightforward design methodologies that can be employed by structural designers in preliminary design stages to make intelligent choices concerning the material, layup, and structural configurations so that a more efficient structure with structural integrity can be designed and built. Considerable progress was made towards achieving these goals via this work. In regard to damage tolerance considerations, the following were identified as important effects: composite layup and associated orthotropy/structural anisotropy, specifics of initial local damage mechanisms, role of longitudinal versus hoop stress, and large deformation and associated geometric nonlinearity. Means were established to account for effects of radius and for the nonlinear response. In particular, nondimensional parameters were identified to characterize the importance of nonlinearity in the response of pressurized cylinders. This led to the establishment of a iso-nonlinear-error plot for reference in structural design. Finally, in the case of damage tolerance, the general approach of the original methodology to predict the failure pressure involving extending basic plate failure data by accounting for the local stress intensification was accomplished for the general case by accounting for the mechanisms noted by utilizing the capability of the STAGS finite element code and numerically calculating the local stress intensification for the particular configuration to be considered. For the issue of damage arrest, placement of and configuration of stiffeners (including stiffener curvature), and magnitude and orientation of principal strains due to local bending were found to be key considerations. Means were established to account for stiffener effectiveness quantitatively based on radius, slit size, stiffener curvature' and relative bending stifffiesses involved. Geometric nonlinearity was also found to play an - 24 - important role here. Furthermore, it was determined that damage propagation is controlled by different mechanisms (hoop stress versus flapping stress and the associated factors involved in each) depending upon the direction of damage propagation. This latter item results in an inability to scale these phenomena in one test due to the different factors involved. Finally, the importance of shell curvature and associated instability in response to transverse loading including impact were found to be important considerations in damage resistance. A technique, involving asymmetric meshing of a finite element mesh, was developed to predict this behavior and showed excellent correlation with experimental results. Further details of these ten years of work are presented herein with references made to the fourteen documents produced during this work where full details can be found. Implications of this work are discussed and recommendations made. Although it is clear that there is more work to be done to fully understand composite fuselage technology and specifically the overall issue of damage in primary load-bearing composite structures, important understanding and capability has been extended via this work.

Technology and Teaching: Promoting Active Learning Using Individual Response Technology in Large Introductory Psychology Classes

ERIC Educational Resources Information Center

Poirier, Christopher R.; Feldman, Robert S.

2007-01-01

Individual response technology (IRT), in which students use wireless handsets to communicate real-time responses, permits the recording and display of aggregated student responses during class. In comparison to a traditional class that did not employ IRT, students using IRT performed better on exams and held positive attitudes toward the…

Clinical nutrition managers have access to sources of empowerment.

PubMed

Mislevy, J M; Schiller, M R; Wolf, K N; Finn, S C

2000-09-01

To ascertain perceived access of dietitians to power in the workplace. The conceptual framework was Kanter's theory of organizational power. The Conditions for Work Effectiveness Questionnaire was used to measure perceived access to sources of power: information, support, resources, and opportunities. Demographic data were collected to identify factors that may enhance empowerment. The questionnaire was sent to a random sample of 348 dietitians chosen from members of the Clinical Nutrition Management dietetic practice group of the American Dietetic Association. Blank questionnaires were returned by 99 (28.4%) people not working as clinical nutrition managers, which left 249 in the sample. Descriptive statistics were used to organize and summarize data. One-way analysis of variance and t tests were performed to identify differences in responses based on levels of education, work setting, and information technology skills. Usable questionnaires were received from 178 people (71.5%). On a 5-point scale, scores for access to information (mean +/- standard deviation [SD] = 3.8 +/- 0.7), opportunity (mean +/- SD = 3.6 +/- 0.7), support (mean +/- SD = 3.2 +/- 0.9), and resources (mean +/- SD = 3.1 +/- 0.8) demonstrated that clinical nutrition managers perceived themselves as having substantial access to sources of empowerment. Those having higher levels of education, working in larger hospitals, having better-developed information technology skills, and using information technology more frequently had statistically significant higher empowerment scores (P = < or = .05) than contrasting groups in each category. Clinical nutrition managers are empowered and able to assume leadership roles in today's health care settings. Their power may be enhanced by asserting more pressure to gain greater access to sources of power: support, information, resources, and opportunities.

Optofluidic technology for monitoring rotifer Brachionus calyciflorus responses to regular light pulses

NASA Astrophysics Data System (ADS)

Cartlidge, Rhys; Campana, Olivia; Nugegoda, Dayanthi; Wlodkowic, Donald

2016-12-01

Behavioural alterations can occur as a result of a toxicant exposure at concentrations significantly lower than lethal effects that are commonly measured in acute toxicity testing. The use of alternating light and dark photoperiods to test phototactic responses of aquatic invertebrates in the presence of environmental contaminants provides an attractive analytical avenue. Quantification of phototactic responses represents a sublethal endpoint that can be employed as an early warning signal. Despite the benefits associated with the assessment of these endpoints, there is currently a lack of automated and miniaturized bioanalytical technologies to implement the development of toxicity testing with small aquatic species. In this study we present a proof-of-concept microfluidic Lab-on-a-Chip (LOC) platform for the assessment of rotifer swimming behavior in the presence of the toxicant copper sulfate. The device was designed to assess impact of toxicants at sub-lethal concentrations on freshwater crustacean Brachionus calyciflorus, testing behavioral endpoints such as animal swimming distance, speed and acceleration. The LOC device presented in this work enabled straightforward caging of microscopic crustaceans as well as non-invasive analysis of rapidly swimming animals in a focal plane of a video-microscopy system. The chip-based technology was fabricated using a new photolithography method that enabled formation of thick photoresist layers with minimal distortion. Photoresist molds were then employed for replica molding of LOC devices with poly(dimethylsiloxane) (PDMS) elastomer. The complete bioanalytical system consisted of: (i) microfluidic PDMS chip-based device; (ii) peristaltic microperfusion pumping manifold; (iii) miniaturized CMOS camera for video data acquisition; and (iv) video analysis software algorithms for quantification of changes in swimming behaviour of B. calyciflorus in response to reference toxicants.

Exploiting a new electrochemical sensor for biofilm monitoring and water treatment optimization.

PubMed

Pavanello, Giovanni; Faimali, Marco; Pittore, Massimiliano; Mollica, Angelo; Mollica, Alessandro; Mollica, Alfonso

2011-02-01

Bacterial biofilm development is a serious problem in many fields, and the existing biofilm monitoring sensors often turn out to be inadequate. In this perspective, a new sensor (ALVIM) has been developed, exploiting the natural marine and freshwater biofilms electrochemical activity, proportional to surface covering. The results presented in this work, obtained testing the ALVIM system both in laboratory and in an industrial environment, show that the sensor gives a fast and accurate response to biofilm growth, and that this response can be used to optimize cleaning treatments inside pipelines. Compared to the existing biofilm sensors, the proposed system show significant technological innovations, higher sensitivity and precision. © 2010 Elsevier Ltd. All rights reserved.

Design and fabrication of highly sensitive and stable biochip for glucose biosensing

NASA Astrophysics Data System (ADS)

Lu, Shi-Yu; Lu, Yao; Jin, Meng; Bao, Shu-Juan; Li, Wan-Yun; Yu, Ling

2017-11-01

Common producing steps for test strips is complex and fussy. In this work, we proposed a feasible binder-free test strips fabrication method to directly grow enzyme/manganese phosphate nanosheets hybrids on the screen-print electrodes (SPE). Combined with microfluidic packaging technology, the ready-made portable electrochemical biochip shows a wider linear range (1-40 mM, R2 = 0.9998) and excellent stability (maintained 98% response current after 20 days store and retained 75% response current after continuous 30 days determination) for the detection of glucose. Compared with commercial test strips, the biochip exhibits excellent sensitivity, stability and accuracy, which is indicative of its potential application in real samples.

Latest Advances in Antibacterial Materials

NASA Astrophysics Data System (ADS)

Loh, Xian Jun

This paper will update readers on the latest work in the area of antibacterial polymeric systems. There is extensive literature on existing systems. This complexity confines us to the latest antibacterial materials which possess (1) responsive antibacterial activity on their own; (2) anti-biofilm formation and (3) formation of antibacterial polymeric films. The objective of this review is to provide an overview of the antibacterial synthetic polymer field. In this paper, I will analyze the early promise of this technology as well as highlight potential challenges that adopters could face. The primary focus will be the application of materials to the medical industry and to show how these materials can be tailored to create responsive, customized bactericidal materials.

Introduction of structural health and safety monitoring warning systems for Shenzhen-Hong Kong Western Corridor Shenzhen Bay Bridge

NASA Astrophysics Data System (ADS)

Li, N.; Zhang, X. Y.; Zhou, X. T.; Leng, J.; Liang, Z.; Zheng, C.; Sun, X. F.

2008-03-01

Though the brief introduction of the completed structural health and safety monitoring warning systems for Shenzhen-Hongkong western corridor Shenzhen bay highway bridge (SZBHMS), the self-developed system frame, hardware and software scheme of this practical research project are systematically discussed in this paper. The data acquisition and transmission hardware and the basic software based on the NI (National Instruments) Company virtual instruments technology were selected in this system, which adopted GPS time service receiver technology and so on. The objectives are to establish the structural safety monitoring and status evaluation system to monitor the structural responses and working conditions in real time and to analyze the structural working statue using information obtained from the measured data. It will be also provided the scientific decision-making bases for the bridge management and maintenance. Potential technical approaches to the structural safety warning systems, status identification and evaluation method are presented. The result indicated that the performance of the system has achieved the desired objectives, ensure the longterm high reliability, real time concurrence and advanced technology of SZBHMS. The innovate achievement which is the first time to implement in domestic, provide the reference for long-span bridge structural health and safety monitoring warning systems design.

Idea Technology and Product Technology: Seeing beyond the Text to the Technology That Works

ERIC Educational Resources Information Center

Bednar, Maryanne R.

2004-01-01

Sifting through the myriad "idea" technologies (such as multiple intelligence theories or Piaget's Theory of Cognitive Development) and "product" technologies (such as PowerPoint or digital cameras) can be overwhelming, but Bednar persuades us that it's not about having the most recent technology, it's about using what works for "your" students in…

Google classroom as a tool for active learning

NASA Astrophysics Data System (ADS)

Shaharanee, Izwan Nizal Mohd; Jamil, Jastini Mohd; Rodzi, Sarah Syamimi Mohamad

2016-08-01

As the world is being developed with the new technologies, discovering and manipulating new ideas and concepts of online education are changing rapidly. In response to these changes, many states, institutions, and organizations have been working on strategic plans to implement online education. At the same time, misconceptions and myths related to the difficulty of teaching and learning online, technologies available to support online instruction, the support and compensation needed for high-quality instructors, and the needs of online students create challenges for such vision statements and planning documents. This paper provides analysis and evaluation of the effectiveness of Google Classroom's active learning activities for data mining subject under the Decision Sciences program. Technology Acceptance Model (TAM) has been employed to measure the effectiveness of the learning activities. A total of 100 valid unduplicated responses from students who enrolled data mining subject were used in this study. The results indicated that majority of the students satisfy with the Google Classroom's tool that were introduced in the class. Results of data analyzed showed that all ratios are above averages. In particular, comparative performance is good in the areas of ease of access, perceived usefulness, communication and interaction, instruction delivery and students' satisfaction towards the Google Classroom's active learning activities.

Thin, Light, Flexible Heaters Save Time and Energy

NASA Technical Reports Server (NTRS)

2007-01-01

The Icing Branch at NASA's Glenn Research Center uses the Center's Icing Research Tunnel (IRT) and Icing Research Aircraft to research methods for evaluating and simulating the growth of ice on aircraft, the effects that ice may have on aircraft in flight, and the development and effectiveness of various ice protection and detection systems. EGC Enterprises Inc. (EGC), of Chardon, Ohio, used the IRT to develop thermoelectric thin-film heater technology to address in-flight icing on aircraft wings. Working with researchers at Glenn and the original equipment manufacturers of aircraft parts, the company tested various thin, flexible, durable, lightweight, and efficient heaters. Development yielded a thin-film heater technology that can be used in many applications in addition to being an effective deicer for aircraft. This new thermoelectric heater was dubbed the QoFoil Rapid Response Thin-Film Heater, or QoFoil, for short. The product meets all criteria for in-flight use and promises great advances in thin-film, rapid response heater technology for a broad range of industrial applications. Primary advantages include time savings, increased efficiency, and improved temperature uniformity. In addition to wing deicing, EGC has begun looking at the material's usefulness for applications including cooking griddles, small cabinet heaters, and several laboratory uses.

75 FR 57520 - NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and Technology Working...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... Science Subcommittee; Supporting Research and Technology Working Group; Meeting AGENCY: National... announces a meeting of the Supporting Research and Technology Working Group of the Planetary Science... INFORMATION CONTACT: Dr. Michael New, Planetary Science Division, National Aeronautics and Space...

75 FR 21602 - Online Safety and Technology Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... OSTWG is tasked with evaluating industry efforts to promote a safe online environment for children. The... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

75 FR 20388 - International Business Machines Corporation, Global Technology Services Business Unit, Integrated...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-19

... Expense Team, Working From Various States in the United States, Including On-Site Leased Workers From... Technology Services Business Unit, Integrated Technology Services, Cost and Expense Team working from various... Technology Services Business Unit, Integrated Technology Services, Cost and Expense Team. The Department has...

Identification and assessment of site treatment plan implementation opportunities for emerging technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernard, E.A.

1995-12-31

The Department of Energy (DOE), in response to the 1992 Federal Facility Compliance Act, has prepared Site Treatment Plans (STP) for the approximately 2,000 waste streams identified within its mixed waste inventory Concurrently, emerging mixed waste treatment technologies are in final development. This paper defines a three-phase process to identify and assess implementation opportunities for these emerging technologies within the STP. It highlights the first phase, functional matching of expected treatment capabilities with proposed treatment requirements. Matches are based on treatment type, regulated contaminant and waste matrix type, for both capabilities and requirements. Results identify specific waste streams and volumesmore » that could be treated by each emerging technology. A study for Plasma Hearth Process, Delphi DETOX{sup sm}, Supercritical Water Oxidation and Vitrification shows that about 200,000 ml of DOE`s mixed waste inventory can potentially be treated by one or more of these emerging technologies. Actual implementations are small fractions of the treatable inventory. Differences between potential and actual implementations must be minimized to accrue optimum benefit from implementation of emerging or alternative treatment technologies. Functional matching is the first phase in identifying and quantifying benefits, addressing technology system and treatment issues, and providing, in part, the basis for STP implementation decisions. DOE, through EM`s Office of Technology Development, has funded this work.« less

[Evaluation of new and emerging health technologies. Proposal for classification].

PubMed

Prados-Torres, J D; Vidal-España, F; Barnestein-Fonseca, P; Gallo-García, C; Irastorza-Aldasoro, A; Leiva-Fernández, F

2011-01-01

Review and develop a proposal for the classification of health technologies (HT) evaluated by the Health Technology Assessment Agencies (HTAA). Peer review of AETS of the previous proposed classification of HT. Analysis of their input and suggestions for amendments. Construction of a new classification. Pilot study with physicians. Andalusian Public Health System. Spanish HTAA. Experts from HTAA. Tutors of family medicine residents. HT Update classification previously made by the research team. Peer review by Spanish HTAA. Qualitative and quantitative analysis of responses. Construction of a new and pilot study based on 12 evaluation reports of the HTAA. We obtained 11 thematic categories that are classified into 6 major head groups: 1, prevention technology; 2, diagnostic technology; 3, therapeutic technologies; 4, diagnostic and therapeutic technologies; 5, organizational technology, and 6, knowledge management and quality of care. In the pilot there was a good concordance in the classification of 8 of the 12 reports reviewed by physicians. Experts agree on 11 thematic categories of HT. A new classification of HT with double entry (Nature and purpose of HT) is proposed. APPLICABILITY: According to experts, the classification of the work of the HTAA may represent a useful tool to transfer and manage knowledge. Moreover, an adequate classification of the HTAA reports would help clinicians and other potential users to locate them and this can facilitate their dissemination. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

New Approaches in Reusable Booster System Life Cycle Cost Modeling

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2013-01-01

This paper presents the results of a 2012 life cycle cost (LCC) study of hybrid Reusable Booster Systems (RBS) conducted by NASA Kennedy Space Center (KSC) and the Air Force Research Laboratory (AFRL). The work included the creation of a new cost estimating model and an LCC analysis, building on past work where applicable, but emphasizing the integration of new approaches in life cycle cost estimation. Specifically, the inclusion of industry processes/practices and indirect costs were a new and significant part of the analysis. The focus of LCC estimation has traditionally been from the perspective of technology, design characteristics, and related factors such as reliability. Technology has informed the cost related support to decision makers interested in risk and budget insight. This traditional emphasis on technology occurs even though it is well established that complex aerospace systems costs are mostly about indirect costs, with likely only partial influence in these indirect costs being due to the more visible technology products. Organizational considerations, processes/practices, and indirect costs are traditionally derived ("wrapped") only by relationship to tangible product characteristics. This traditional approach works well as long as it is understood that no significant changes, and by relation no significant improvements, are being pursued in the area of either the government acquisition or industry?s indirect costs. In this sense then, most launch systems cost models ignore most costs. The alternative was implemented in this LCC study, whereby the approach considered technology and process/practices in balance, with as much detail for one as the other. This RBS LCC study has avoided point-designs, for now, instead emphasizing exploring the trade-space of potential technology advances joined with potential process/practice advances. Given the range of decisions, and all their combinations, it was necessary to create a model of the original model and use genetic algorithms to explore results. A strong business case occurs when viable paths are identified for an affordable up-front investment, and these paths can credibly achieve affordable, responsive operations, characterized by smaller direct touch labor efforts at the wing level from flight to flight. The results supporting this approach, its potential, and its conclusions are presented here.

Survey of UK dentists regarding the use of CAD/CAM technology.

PubMed

Tran, D; Nesbit, M; Petridis, H

2016-11-18

Statement of the problem Digital workflows (CAD/CAM) have been introduced in dentistry during recent years. No published information exists on dentists' use and reporting of this technology.Purpose The purpose of this survey was to identify the infiltration of CAD/CAM technology in UK dental practices and to investigate the relationship of various demographic factors to the answers regarding use or non-use of this technology.Materials and methods One thousand and thirty-one online surveys were sent to a sample of UK dentists composing of both users and non-users of CAD/CAM. It aimed to reveal information regarding type of usage, materials, perceived benefits, barriers to access, and disadvantages of CAD/CAM dentistry. Statistical analysis was undertaken to test the influence of various demographic variables such as country of work, dentist experience, level of training and type of work (NHS or private).Results The number of completed responses totalled 385. Most of the respondents did not use any part of a digital workflow, and the main barriers to CAD/CAM use were initial costs and a lack of perceived benefit over conventional methods. Dentists delivering mostly private work were most likely to have adopted CAD/CAM technology (P <0.001). Further training also correlated with a greater likelihood of CAD/CAM usage (P <0.001). Most users felt that the technology had led to a change in the use of dental materials, leading to increased use of, for example, zirconia and lithium disilicate. Most users were trained either by companies or self-trained, and a third felt that their training was insufficient. The majority of respondents (89%) felt that CAD/CAM had a big role to play in the future.Conclusion Most of the respondents did not use any part of a digital workflow. However, the majority of surveyed dentists were interested in incorporating CAD/CAM into their workflow, while most believed that it will have a big role in the future. There are still some concerns from dentists about the quality of chairside CAD/CAM restorations while the costs are still in the main hugely prohibitive (especially for NHS dentistry).

New Approaches in Reuseable Booster System Life Cycle Cost Modeling

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2013-01-01

This paper presents the results of a 2012 life cycle cost (LCC) study of hybrid Reusable Booster Systems (RBS) conducted by NASA Kennedy Space Center (KSC) and the Air Force Research Laboratory (AFRL). The work included the creation of a new cost estimating model and an LCC analysis, building on past work where applicable, but emphasizing the integration of new approaches in life cycle cost estimation. Specifically, the inclusion of industry processes/practices and indirect costs were a new and significant part of the analysis. The focus of LCC estimation has traditionally been from the perspective of technology, design characteristics, and related factors such as reliability. Technology has informed the cost related support to decision makers interested in risk and budget insight. This traditional emphasis on technology occurs even though it is well established that complex aerospace systems costs are mostly about indirect costs, with likely only partial influence in these indirect costs being due to the more visible technology products. Organizational considerations, processes/practices, and indirect costs are traditionally derived ("wrapped") only by relationship to tangible product characteristics. This traditional approach works well as long as it is understood that no significant changes, and by relation no significant improvements, are being pursued in the area of either the government acquisition or industry?s indirect costs. In this sense then, most launch systems cost models ignore most costs. The alternative was implemented in this LCC study, whereby the approach considered technology and process/practices in balance, with as much detail for one as the other. This RBS LCC study has avoided point-designs, for now, instead emphasizing exploring the trade-space of potential technology advances joined with potential process/practice advances. Given the range of decisions, and all their combinations, it was necessary to create a model of the original model and use genetic algorithms to explore results. A strong business case occurs when viable paths are identified for an affordable up-front investment, and these paths can credibly achieve affordable, responsive operations, characterized by smaller direct touch labor efforts at the wing level from flight to flight. The results supporting this approach, its potential, and its conclusions are presented here.

Perianesthesia Nurses Are My Second Family: A Qualitative Descriptive Study.

PubMed

Seefeldt, Julanne; Wood, Stacey; Bolton, Pamela; Fitzpatrick, Tara; Stegenga, Kristin; Roberts, Cristine

2017-12-01

Identify the perceptions of perianesthesia nurses regarding behaviors that promote or detract from sustaining a safe, efficient, and satisfying work environment. Two focus groups and seven individual interviews (n=14) were conducted exploring the perceptions regarding team behavior of registered nurses in one pediatric perianesthesia unit. Qualitative descriptive data collection, inductive content analysis. Nurses described a responsive, engaged health care team whose leadership is available and directive when needed, as creating an effective, satisfying work environment. Primary themes that emerged were Leadership Sets the Tone, Playing Fair, No One Gets Hurt, and Why We Stay. This nursing team acknowledged that inattentive, distracted team members cause frustration, work inequities, and care delays, potentially undermining patient safety. Results demonstrate the need to create and sustain consistently respectful perianesthesia work cultures. Research focusing on unit specific approaches to work distribution, communication, leadership, and technology use is needed. Copyright © 2016 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

Numerical simulation of gender differences in a long-term microgravity exposure

NASA Astrophysics Data System (ADS)

Perez-Poch, Antoni

The objective of this work is to analyse and simulate gender differences when individuals are exposed to long-term microgravity. Risk probability of a health impairment which may put in jeopardy a long-term mission is also evaluated. Computer simulations are becoming a promising research line of work, as physiological models become more and more sophisticated and reliable. Technological advances in state-of-the-art hardware technology and software allow nowadays for better and more accurate simulations of complex phenomena, such as the response of the human cardiovascular system to long-term exposure to microgravity. Experimental data for long-term missions are difficult to achieve and reproduce, therefore the predictions of computer simulations are of a major importance in this field. Our approach is based on a previous model developed and implemented in our laboratory (NELME: Numerical Evaluation of Long-term Microgravity Effects). The software simulates the behaviour of the cardiovascular system and different human organs, has a modular architecture, and allows to introduce perturbations such as physical exercise or countermeasures. The implementation is based on a complex electricallike model of this control system, using inexpensive software development frameworks, and has been tested and validated with the available experimental data. Gender differences have been implemented for this specific work, as an adjustment of a number of parameters that are included in the model. Women versus men physiological differences have been therefore taken into account, based upon estimations from the physiology bibliography. A number of simulations have been carried out for long-term exposure to microgravity. Gravity varying from Earth-based to zero, and time exposure are the two main variables involved in the construction of results, including responses to patterns of physical aerobical exercise, and also thermal stress simulating an extra-vehicular activity. Results show that significant differences appear between men and women physiological response after long-term exposure (more than three months) to microgravity. Risk evaluation for every gender, and specific risk thresholds are provided. Initial results are compatible with the existing data, and provide unique information regarding different patterns of microgravity exposure. We conclude that computer-based models such us NELME are a promising line of work to predict health risks in long-term missions. More experimental work is needed to adjust some parameters of the model. This work may be seen as another contribution to a better understanding of the underlying processes involved for both women in man adaptation to long-term microgravity.

75 FR 1338 - Online Safety and Technology Working Group Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

... promote a safe online environment for children. The Act requires the OSTWG to report its findings and... and Technology Working Group Meeting AGENCY: National Telecommunications and Information... public meeting of the Online Safety and Technology Working Group (OSTWG). DATES: The meeting will be held...

Authoritative knowledge, the technological imperative and women's responses to prenatal diagnostic technologies.

PubMed

McCoyd, Judith L M

2010-12-01

Theories about authoritative knowledge (AK) and the technological imperative have received varying levels of interest in anthropological, feminist and science and technology studies. Although the anthropological literature abounds with empirical considerations of authoritative knowledge, few have considered both theories through an empirical, inductive lens. Data extracted from an earlier study of 30 women's responses to termination for fetal anomaly are reanalyzed to consider the women's views of, and responses to, prenatal diagnostic technologies (PNDTs). Findings indicate that a small minority embrace the societal portrayal of technology as univalently positive, while the majority have nuanced and ambivalent responses to the use of PNDTs. Further, the interface of authoritative knowledge and the technological imperative suggests that AK derives not only from medical provider status and technology use, but also from the adequacy and trustworthiness of the information. The issue of timing and uncertainty of the information also are interrogated for their impact on women's lives and what that can illuminate about the theories of AK and the technological imperative.

Leadership, organization and health at work: a case study of a Swedish industrial company.

PubMed

Eriksson, Andrea; Jansson, Bjarne; Haglund, Bo J A; Axelsson, Runo

2008-06-01

The application of knowledge on organization and leadership is important for the promotion of health at workplace. The purpose of this article is to analyse the leadership and organization, including the organizational culture, of a Swedish industrial company in relation to the health of the employees. The leadership in this company has been oriented towards developing and actively promoting a culture and a structure of organization where the employees have a high degree of control over their work situation. According to the employees, this means extensive possibilities for personal development and responsibility, as well as good companionship, which makes them feel well at work. This is also supported by the low sickness rate of the company. The results indicate that the leadership and organization of this company may have been conducive to the health of the employees interviewed. However, the culture of personal responsibility and the structure of self-managed teams seemed to suit only those who were able to manage the demands of the company and adapt to that kind of organization. Therefore, the findings indicate that the specific context of the technology, the environment and the professional level of the employees need to be taken into consideration when analysing the relation between leadership, organization and health at work.

Wavelength specific excitation of gold nanoparticle thin-films

NASA Astrophysics Data System (ADS)

Lucas, Thomas M.; James, Kurtis T.; Beharic, Jasmin; Moiseeva, Evgeniya V.; Keynton, Robert S.; O'Toole, Martin G.; Harnett, Cindy K.

2014-01-01

Advances in microelectromechanical systems (MEMS) continue to empower researchers with the ability to sense and actuate at the micro scale. Thermally driven MEMS components are often used for their rapid response and ability to apply relatively high forces. However, thermally driven MEMS often have high power consumption and require physical wiring to the device. This work demonstrates a basis for designing light-powered MEMS with a wavelength specific response. This is accomplished by patterning surface regions with a thin film containing gold nanoparticles that are tuned to have an absorption peak at a particular wavelength. The heating behavior of these patterned surfaces is selected by the wavelength of laser directed at the sample. This method also eliminates the need for wires to power a device. The results demonstrate that gold nanoparticle films are effective wavelength-selective absorbers. This "hybrid" of infrared absorbent gold nanoparticles and MEMS fabrication technology has potential applications in light-actuated switches and other mechanical structures that must bend at specific regions. Deposition methods and surface chemistry will be integrated with three-dimensional MEMS structures in the next phase of this work. The long-term goal of this project is a system of light-powered microactuators for exploring cellular responses to mechanical stimuli, increasing our fundamental understanding of tissue response to everyday mechanical stresses at the molecular level.

Speed challenge: a case for hardware implementation in soft-computing

NASA Technical Reports Server (NTRS)

Daud, T.; Stoica, A.; Duong, T.; Keymeulen, D.; Zebulum, R.; Thomas, T.; Thakoor, A.

2000-01-01

For over a decade, JPL has been actively involved in soft computing research on theory, architecture, applications, and electronics hardware. The driving force in all our research activities, in addition to the potential enabling technology promise, has been creation of a niche that imparts orders of magnitude speed advantage by implementation in parallel processing hardware with algorithms made especially suitable for hardware implementation. We review our work on neural networks, fuzzy logic, and evolvable hardware with selected application examples requiring real time response capabilities.

Development of Medical Technology for Contingency Response to Marrow Toxic Agents

DTIC Science & Technology

2013-10-30

NUMBER N/A 5b. GRANT NUMBER N00014-12-1-0142 5c. PROGRAM ELEMENT NUMBER N/A 6. AUTHOR( S ) Spellman, Stephen 5d. PROJECT NUMBER N/A 5e. TASK...NUMBER Project 1, 2, 3, 4 5f. WORK UNIT NUMBER N/A 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) National Marrow Donor Program 3001 Broadway...St., N.E., Ste. 500 Minneapolis, MN 55413 8. PERFORMING ORGANIZATION REPORT NUMBER N/A 9. SPONSORING/MONITORING AGENCY NAME( S ) AND ADDRESS(ES

Stage acoustics for musicians: A multidimensional approach using 3D ambisonic technology

NASA Astrophysics Data System (ADS)

Guthrie, Anne

In this research, a method was outlined and tested for the use of 3D Ambisonic technology to inform stage acoustics research and design. Stage acoustics for musicians as a field has yet to benefit from recent advancements in auralization and spatial acoustic analysis. This research attempts to address common issues in stage acoustics: subjective requirements for performers in relation to feelings of support, quality of sound, and ease of ensemble playing in relation to measurable, objective characteristics that can be used to design better stage enclosures. While these issues have been addressed in previous work, this research attempts to use technological advancements to improve the resolution and realism of the testing and analysis procedures. Advancements include measurement of spatial impulse responses using a spherical microphone array, higher-order ambisonic encoding and playback for real-time performer auralization, high-resolution spatial beamforming for analysis of onstage impulse responses, and multidimensional scaling procedures to determine subjective musician preferences. The methodology for implementing these technologies into stage acoustics research is outlined in this document and initial observations regarding implications for stage enclosure design are proposed. This research provides a robust method for measuring and analyzing performer experiences on multiple stages without the costly and time-intensive process of physically surveying orchestras on different stages, with increased repeatability while maintaining a high level of immersive realism and spatial resolution. Along with implications for physical design, this method provides possibilities for virtual teaching and rehearsal, parametric modeling and co-located performance.

Sandia National Laboratories: Working with Sandia

Science.gov Websites

Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios Report Economic Impact Environmental Reports Fact Sheets Search Sandia Publications Labs Accomplishments /Technology Transfer Technology Partnerships Economic Impact Facebook Twitter YouTube Flickr RSS Working with

Technology and Employment. Joint Hearings before the Subcommittee on Science, Research and Technology of the Committee on Science and Technology and the Task Force on Education and Employment of the Committee on the Budget, U.S. House of Representatives, Ninety-Eighth Congress, First Session (June 7, 9, 10, 14-16, and 23, 1983).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science and Technology.

These are transcripts of joint Congressional hearings on technology and employment. Objectives stated for the hearings are to identify how technology is leading to changes in the nation's work force and work environment and to make recommendations for governmental action that will ease the adjustment of the work force and workplace to technology,…

Geographic Information System Technology Leveraged for Crisis Planning, Emergency, Response, and Disaster Management

NASA Astrophysics Data System (ADS)

Ross, A.; Little, M. M.

2013-12-01

NASA's Atmospheric Science Data Center (ASDC) is piloting the use of Geographic Information System (GIS) technology that can be leveraged for crisis planning, emergency response, and disaster management/awareness. Many different organizations currently use GIS tools and geospatial data during a disaster event. ASDC datasets have not been fully utilized by this community in the past due to incompatible data formats that ASDC holdings are archived in. Through the successful implementation of this pilot effort and continued collaboration with the larger Homeland Defense and Department of Defense emergency management community through the Homeland Infrastructure Foundation-Level Data Working Group (HIFLD WG), our data will be easily accessible to those using GIS and increase the ability to plan, respond, manage, and provide awareness during disasters. The HIFLD WG Partnership has expanded to include more than 5,900 mission partners representing the 14 executive departments, 98 agencies, 50 states (and 3 territories), and more than 700 private sector organizations to directly enhance the federal, state, and local government's ability to support domestic infrastructure data gathering, sharing and protection, visualization, and spatial knowledge management.The HIFLD WG Executive Membership is lead by representatives from the Department of Defense (DoD) Office of the Assistant Secretary of Defense for Homeland Defense and Americas' Security Affairs - OASD (HD&ASA); the Department of Homeland Security (DHS), National Protection and Programs Directorate's Office of Infrastructure Protection (NPPD IP); the National Geospatial-Intelligence Agency (NGA) Integrated Working Group - Readiness, Response and Recovery (IWG-R3); the Department of Interior (DOI) United States Geological Survey (USGS) National Geospatial Program (NGP), and DHS Federal Emergency Management Agency (FEMA).

Teamwork in the Terminal Area: Organizational Issues and Solutions

NASA Technical Reports Server (NTRS)

Parke, Bonny K.; Kanki, Barbara G.; Rosekind, Mark (Technical Monitor)

1997-01-01

Dynamic growth and technology advances in commercial aviation have turned the terminal area into a complex, multi-organization workplace which requires the smooth coordination of many operational teams. In addition to pilots, cabin crew, air traffic controllers, and dispatch (who nominally work together throughout a flight), surface operations additionally involve local, ground and ramp controllers, ramp agents, maintenance, dozens of service contractors, and any number of teams who are responsible for airport operations. Under abnormal or emergency conditions, even more teams become actively involved. In order to accommodate growth and to meet productivity and safety challenges, numerous changes are being made in surface operations. Unfortunately, it is often the case that changes in technologies, organizational roles, procedures, and training are developed and implemented in isolated and piecemeal fashion without regard to cross organizational impact. Thus, there is a need for evaluation methodologies which assure integrated system safety for all organizations. Such methodologies should aid the understanding of how organizations work together and how changes in one domain affects the next. In this study, we develop one approach toward addressing these organizational issues. Examples of surface operations in abnormal situations are examined in regard to their impact on personnel in the terminal area. Timelines are given for the responses to incidents, along with the necessary communication links, the specific roles that members of terminal teams have, and any overlapping responsibilities. Suggestions to improve cross-operational teamwork are given. Methods of graphic representation are explored, both in regards to human links and access to information. The outcome of such an approach should enhance the understanding which is critical for resolving organizational conflicts and maximizing system effectiveness.