Using Fossil Shark Teeth to Illustrate Evolution and Introduce Basic Geologic Concepts in a High School Biology Classroom

NASA Astrophysics Data System (ADS)

Agnew, J. G.; Nunn, J. A.

2007-12-01

Shell Foundation sponsors a program at Louisiana State University called Shell Undergraduate Recruitment and Geoscience Education (SURGE). The purpose of SURGE is to help local high school science teachers incorporate geology into their classrooms by providing resources and training. As part of this program, a workshop for high school biology teachers was held at Louisiana State University in Baton Rouge on June 3-5, 2007. We had the teachers do a series of activities on fossil shark teeth to illustrate evolution and introduce basic earth science concepts such as geologic time, superposition, and faunal succession and provided the teachers with lesson plans and materials. As an example, one of our exercises explores the evolution of the megatoothed shark lineage leading to Carcharocles megalodon, the largest predatory shark in history with teeth up to 17 cm long. Megatoothed shark teeth make excellent evolutionary subjects because they have a good fossil record and show continuous transitions in morphology from the Eocene to Pliocene. Our activity follows the learning cycle model. We take advantage of the curiosity of sharks shared by most people, and allow students to explore the variations among different shark teeth and explain the causes of those variations. The objectives of this exercise are to have the students: 1) sort fossil shark teeth into biologically reasonable species; 2) form hypotheses about evolutionary relationships among fossil shark teeth; and 3) describe and interpret evolutionary trends in the fossil Megatoothed lineage. To do the activity, students are divided into groups of 2-3 and given a shuffled set of 72 shark tooth cards with different images of megatoothed shark teeth. They are instructed to group the shark tooth cards into separate species of sharks. After sorting the cards, students are asked to consider the evolutionary relationships among their species and arrange their species chronologically according to the species first appearance in the fossil record. This is followed by a group discussion of each group's predictions. Next students are given photographs of teeth from different megatoothed sharks, and a geologic time scale with the sharks stratigraphic ranges. Students are asked to describe evolutionary trends in the fossil megatoothed lineage and formulate several hypotheses to explain the observed evolutionary trends. The exercise is concluded with a discussion of the environmental and biotic events occurring between the Eocene and Miocene epochs that may have caused the evolutionary changes in the megatoothed shark's teeth.

Modern mammal origins: evolutionary grades in the Early Cretaceous of North America.

PubMed

Jacobs, L L; Winkler, D A; Murry, P A

1989-07-01

Major groups of modern mammals have their origins in the Mesozoic Era, yet the mammalian fossil record is generally poor for that time interval. Fundamental morphological changes that led to modern mammals are often represented by small samples of isolated teeth. Fortunately, functional wear facets on teeth allow prediction of the morphology of occluding teeth that may be unrepresented by fossils. A major step in mammalian evolution occurred in the Early Cretaceous with the evolution of tribosphenic molars, which characterize marsupials and placentals, the two most abundant and diverse extant groups of mammals. A tooth from the Early Cretaceous (110 million years before present) of Texas tests previous predictions (based on lower molars) of the morphology of upper molars in early tribosphenic dentitions. The lingual cusp (protocone) is primitively without shear facets, as expected, but the cheek side of the tooth is derived (advanced) in having distinctive cusps along the margin. The tooth, although distressingly inadequate to define many features of the organism, demonstrates unexpected morphological diversity at a strategic stage of mammalian evolution and falsifies previous claims of the earliest occurrence of true marsupials.

Small Theropod Teeth from the Late Cretaceous of the San Juan Basin, Northwestern New Mexico and Their Implications for Understanding Latest Cretaceous Dinosaur Evolution

PubMed Central

Williamson, Thomas E.; Brusatte, Stephen L.

2014-01-01

Studying the evolution and biogeographic distribution of dinosaurs during the latest Cretaceous is critical for better understanding the end-Cretaceous extinction event that killed off all non-avian dinosaurs. Western North America contains among the best records of Late Cretaceous terrestrial vertebrates in the world, but is biased against small-bodied dinosaurs. Isolated teeth are the primary evidence for understanding the diversity and evolution of small-bodied theropod dinosaurs during the Late Cretaceous, but few such specimens have been well documented from outside of the northern Rockies, making it difficult to assess Late Cretaceous dinosaur diversity and biogeographic patterns. We describe small theropod teeth from the San Juan Basin of northwestern New Mexico. These specimens were collected from strata spanning Santonian – Maastrichtian. We grouped isolated theropod teeth into several morphotypes, which we assigned to higher-level theropod clades based on possession of phylogenetic synapomorphies. We then used principal components analysis and discriminant function analyses to gauge whether the San Juan Basin teeth overlap with, or are quantitatively distinct from, similar tooth morphotypes from other geographic areas. The San Juan Basin contains a diverse record of small theropods. Late Campanian assemblages differ from approximately co-eval assemblages of the northern Rockies in being less diverse with only rare representatives of troodontids and a Dromaeosaurus-like taxon. We also provide evidence that erect and recurved morphs of a Richardoestesia-like taxon represent a single heterodont species. A late Maastrichtian assemblage is dominated by a distinct troodontid. The differences between northern and southern faunas based on isolated theropod teeth provide evidence for provinciality in the late Campanian and the late Maastrichtian of North America. However, there is no indication that major components of small-bodied theropod diversity were lost during the Maastrichtian in New Mexico. The same pattern seen in northern faunas, which may provide evidence for an abrupt dinosaur extinction. PMID:24709990

Small theropod teeth from the Late Cretaceous of the San Juan Basin, northwestern New Mexico and their implications for understanding latest Cretaceous dinosaur evolution.

PubMed

Williamson, Thomas E; Brusatte, Stephen L

2014-01-01

Studying the evolution and biogeographic distribution of dinosaurs during the latest Cretaceous is critical for better understanding the end-Cretaceous extinction event that killed off all non-avian dinosaurs. Western North America contains among the best records of Late Cretaceous terrestrial vertebrates in the world, but is biased against small-bodied dinosaurs. Isolated teeth are the primary evidence for understanding the diversity and evolution of small-bodied theropod dinosaurs during the Late Cretaceous, but few such specimens have been well documented from outside of the northern Rockies, making it difficult to assess Late Cretaceous dinosaur diversity and biogeographic patterns. We describe small theropod teeth from the San Juan Basin of northwestern New Mexico. These specimens were collected from strata spanning Santonian - Maastrichtian. We grouped isolated theropod teeth into several morphotypes, which we assigned to higher-level theropod clades based on possession of phylogenetic synapomorphies. We then used principal components analysis and discriminant function analyses to gauge whether the San Juan Basin teeth overlap with, or are quantitatively distinct from, similar tooth morphotypes from other geographic areas. The San Juan Basin contains a diverse record of small theropods. Late Campanian assemblages differ from approximately coeval assemblages of the northern Rockies in being less diverse with only rare representatives of troodontids and a Dromaeosaurus-like taxon. We also provide evidence that erect and recurved morphs of a Richardoestesia-like taxon represent a single heterodont species. A late Maastrichtian assemblage is dominated by a distinct troodontid. The differences between northern and southern faunas based on isolated theropod teeth provide evidence for provinciality in the late Campanian and the late Maastrichtian of North America. However, there is no indication that major components of small-bodied theropod diversity were lost during the Maastrichtian in New Mexico. The same pattern seen in northern faunas, which may provide evidence for an abrupt dinosaur extinction.

Gene networks, occlusal clocks, and functional patches: new understanding of pattern and process in the evolution of the dentition.

PubMed

Polly, P David

2015-05-01

Our understanding of the evolution of the dentition has been transformed by advances in the developmental biology, genetics, and functional morphology of teeth, as well as the methods available for studying tooth form and function. The hierarchical complexity of dental developmental genetics combined with dynamic effects of cells and tissues during development allow for substantial, rapid, and potentially non-linear evolutionary changes. Studies of selection on tooth function in the wild and evolutionary functional comparisons both suggest that tooth function and adaptation to diets are the most important factors guiding the evolution of teeth, yet selection against random changes that produce malocclusions (selectional drift) may be an equally important factor in groups with tribosphenic dentitions. These advances are critically reviewed here.

Complex patterns of tooth replacement revealed in the fruit bat (Eidolon helvum).

PubMed

Popa, Elena M; Anthwal, Neal; Tucker, Abigail S

2016-12-01

How teeth are replaced during normal growth and development has long been an important question for comparative and developmental anatomy. Non-standard model animals have become increasingly popular in this field due to the fact that the canonical model laboratory mammal, the mouse, develops only one generation of teeth (monophyodonty), whereas the majority of mammals possess two generations of teeth (diphyodonty). Here we used the straw-coloured fruit bat (Eidolon helvum), an Old World megabat, which has two generations of teeth, in order to observe the development and replacement of tooth germs from initiation up to mineralization stages. Our morphological study uses 3D reconstruction of histological sections to uncover differing arrangements of the first and second-generation tooth germs during the process of tooth replacement. We show that both tooth germ generations develop as part of the dental lamina, with the first generation detaching from the lamina, leaving the free edge to give rise to a second generation. This separation was particularly marked at the third premolar locus, where the primary and replacement teeth become positioned side by side, unconnected by a lamina. The position of the replacement tooth, with respect to the primary tooth, varied within the mouth, with replacements forming posterior to or directly lingual to the primary tooth. Development of replacement teeth was arrested at some tooth positions and this appeared to be linked to the timing of tooth initiation and the subsequent rate of development. This study adds an additional species to the growing body of non-model species used in the study of tooth replacement, and offers a new insight into the development of the diphyodont condition. © 2016 Anatomical Society.

Modern mammal origins: evolutionary grades in the Early Cretaceous of North America.

PubMed Central

Jacobs, L L; Winkler, D A; Murry, P A

1989-01-01

Major groups of modern mammals have their origins in the Mesozoic Era, yet the mammalian fossil record is generally poor for that time interval. Fundamental morphological changes that led to modern mammals are often represented by small samples of isolated teeth. Fortunately, functional wear facets on teeth allow prediction of the morphology of occluding teeth that may be unrepresented by fossils. A major step in mammalian evolution occurred in the Early Cretaceous with the evolution of tribosphenic molars, which characterize marsupials and placentals, the two most abundant and diverse extant groups of mammals. A tooth from the Early Cretaceous (110 million years before present) of Texas tests previous predictions (based on lower molars) of the morphology of upper molars in early tribosphenic dentitions. The lingual cusp (protocone) is primitively without shear facets, as expected, but the cheek side of the tooth is derived (advanced) in having distinctive cusps along the margin. The tooth, although distressingly inadequate to define many features of the organism, demonstrates unexpected morphological diversity at a strategic stage of mammalian evolution and falsifies previous claims of the earliest occurrence of true marsupials. Images PMID:2740336

Early development and replacement of the stickleback dentition

PubMed Central

Ellis, Nicholas A.; Donde, Nikunj N.; Miller, Craig T.

2017-01-01

Teeth have long served as a model system to study basic questions about vertebrate organogenesis, morphogenesis, and evolution. In non-mammalian vertebrates, teeth typically regenerate throughout adult life. Fish have evolved a tremendous diversity in dental patterning in both their oral and pharyngeal dentitions, offering numerous opportunities to study how morphology develops, regenerates, and evolves in different lineages. Threespine stickleback fish (Gasterosteus aculeatus) have emerged as a new system to study how morphology evolves, and provide a particularly powerful system to study the development and evolution of dental morphology. Here we describe the oral and pharyngeal dentitions of stickleback fish, providing additional morphological, histological, and molecular evidence for homology of oral and pharyngeal teeth. Focusing on the ventral pharyngeal dentition in a dense developmental time course of lab-reared fish, we describe the temporal and spatial consensus sequence of early tooth formation. Early in development, this sequence is highly stereotypical and consists of seventeen primary teeth forming the early tooth field, followed by the first tooth replacement event. Comparing this detailed morphological and ontogenetic sequence to that described in other fish reveals that major changes to how dental morphology arises and regenerates have evolved across different fish lineages. PMID:27145214

An evolutionary view on tooth development and replacement in wild Atlantic salmon (Salmo salar L.).

PubMed

Huysseune, A; Witten, P E

2008-01-01

To gain an insight into the evolution of tooth replacement mechanisms, we studied the development of first-generation and replacement teeth on the dentary of wild Atlantic salmon (Salmo salar L.), a protacanthopterygian teleost, using serially sectioned heads of early posthatching stages as well as adults. First-generation teeth develop within the oral epithelium. The anlage of the replacement tooth is first seen as a placode-like thickening of the outer dental epithelium of the predecessor, at its lingual and caudal side. Ongoing development of the replacement tooth germ is characterized by the elaboration of a population of epithelial cells, termed here the middle dental epithelium, apposed to the inner dental epithelium on the lingual side of the tooth germ. Before the formation of the new successor, a single-layered outer dental epithelium segregates from the middle dental epithelium. The dental organs of the predecessor and the successor remain broadly interconnected. The absence of a discrete successional dental lamina in salmon stands in sharp contrast to what is observed in other teleosts, even those that share with salmon the extraosseous formation of replacement teeth. The mode of tooth replacement in Atlantic salmon displays several characters similar to those observed in the shark Squalus acanthias. To interpret similarities in tooth replacement between Atlantic salmon and chondrichthyans as a case of convergence, or to see them as a result of a heterochronic shift, requires knowledge on the replacement process in more basal actinopterygian lineages. The possibility that the middle dental epithelium functionally substitutes for a successional lamina, and could be a source of stem cells, whose descendants subsequently contribute to the placode of the new replacement tooth, needs to be explored.

Study of the temporal evolution of Whitening Teeth immersed in Peroxide of hydrogen (H2O2) Using Digital Image Processing

NASA Astrophysics Data System (ADS)

Díaz, L.; Morales, Y.; Torres, C.

2015-01-01

The esthetic dentistry reference in our society is determined by several factors, including one that produces more dissatisfaction is abnormal tooth color or that does not meet the patient's expectations. For this reason it has been designed and implemented an algorithm in MATLAB that captures, digitizes, pre-processing and analyzed dental imaging by allowing to evaluate the degree of bleaching caused by the use of peroxide of hidrogen. The samples analyzed were human teeth extracted, which were subjected to different concentrations of peroxide of hidrogen and see if they can teeth whitening when using these products, was used different concentrations and intervals of time to analysis or study of the whitening of the teeth with the hydrogen peroxide.

Iterative adaptive radiations of fossil canids show no evidence for diversity-dependent trait evolution.

PubMed

Slater, Graham J

2015-04-21

A long-standing hypothesis in adaptive radiation theory is that ecological opportunity constrains rates of phenotypic evolution, generating a burst of morphological disparity early in clade history. Empirical support for the early burst model is rare in comparative data, however. One possible reason for this lack of support is that most phylogenetic tests have focused on extant clades, neglecting information from fossil taxa. Here, I test for the expected signature of adaptive radiation using the outstanding 40-My fossil record of North American canids. Models implying time- and diversity-dependent rates of morphological evolution are strongly rejected for two ecologically important traits, body size and grinding area of the molar teeth. Instead, Ornstein-Uhlenbeck processes implying repeated, and sometimes rapid, attraction to distinct dietary adaptive peaks receive substantial support. Diversity-dependent rates of morphological evolution seem uncommon in clades, such as canids, that exhibit a pattern of replicated adaptive radiation. Instead, these clades might best be thought of as deterministic radiations in constrained Simpsonian subzones of a major adaptive zone. Support for adaptive peak models may be diagnostic of subzonal radiations. It remains to be seen whether early burst or ecological opportunity models can explain broader adaptive radiations, such as the evolution of higher taxa.

Iterative adaptive radiations of fossil canids show no evidence for diversity-dependent trait evolution

NASA Astrophysics Data System (ADS)

Slater, Graham J.

2015-04-01

A long-standing hypothesis in adaptive radiation theory is that ecological opportunity constrains rates of phenotypic evolution, generating a burst of morphological disparity early in clade history. Empirical support for the early burst model is rare in comparative data, however. One possible reason for this lack of support is that most phylogenetic tests have focused on extant clades, neglecting information from fossil taxa. Here, I test for the expected signature of adaptive radiation using the outstanding 40-My fossil record of North American canids. Models implying time- and diversity-dependent rates of morphological evolution are strongly rejected for two ecologically important traits, body size and grinding area of the molar teeth. Instead, Ornstein-Uhlenbeck processes implying repeated, and sometimes rapid, attraction to distinct dietary adaptive peaks receive substantial support. Diversity-dependent rates of morphological evolution seem uncommon in clades, such as canids, that exhibit a pattern of replicated adaptive radiation. Instead, these clades might best be thought of as deterministic radiations in constrained Simpsonian subzones of a major adaptive zone. Support for adaptive peak models may be diagnostic of subzonal radiations. It remains to be seen whether early burst or ecological opportunity models can explain broader adaptive radiations, such as the evolution of higher taxa.

Quantitative analysis of trace metal accumulation in teeth using laser-induced breakdown spectroscopy

NASA Astrophysics Data System (ADS)

Samek, O.; Beddows, D. C. S.; Telle, H. H.; Morris, G. W.; Liska, M.; Kaiser, J.

The technique of laser ablation is receiving increasing attention for applications in dentistry, specifically for the treatment of teeth (e.g. drilling of micro-holes and plaque removal). In the process of ablation a luminous micro-plasma is normally generated which may be exploited for elemental analysis. Here we report on quantitative Laser-Induced Breakdown Spectroscopy (LIBS) analysis to study the presence of trace minerals in teeth. A selection of teeth of different age groups has been investigated, ranging from the first teeth of infants, through the second teeth of children, to adults to trace the influence of environmental factors on the accumulation of a number of elements in teeth. We found a close link between elements detected in tooth fillings and toothpastes with those present in teeth.

Early development of rostrum saw-teeth in a fossil ray tests classical theories of the evolution of vertebrate dentitions.

PubMed

Smith, Moya Meredith; Riley, Alex; Fraser, Gareth J; Underwood, Charlie; Welten, Monique; Kriwet, Jürgen; Pfaff, Cathrin; Johanson, Zerina

2015-10-07

In classical theory, teeth of vertebrate dentitions evolved from co-option of external skin denticles into the oral cavity. This hypothesis predicts that ordered tooth arrangement and regulated replacement in the oral dentition were also derived from skin denticles. The fossil batoid ray Schizorhiza stromeri (Chondrichthyes; Cretaceous) provides a test of this theory. Schizorhiza preserves an extended cartilaginous rostrum with closely spaced, alternating saw-teeth, different from sawfish and sawsharks today. Multiple replacement teeth reveal unique new data from micro-CT scanning, showing how the 'cone-in-cone' series of ordered saw-teeth sets arrange themselves developmentally, to become enclosed by the roots of pre-existing saw-teeth. At the rostrum tip, newly developing saw-teeth are present, as mineralized crown tips within a vascular, cartilaginous furrow; these reorient via two 90° rotations then relocate laterally between previously formed roots. Saw-tooth replacement slows mid-rostrum where fewer saw-teeth are regenerated. These exceptional developmental data reveal regulated order for serial self-renewal, maintaining the saw edge with ever-increasing saw-tooth size. This mimics tooth replacement in chondrichthyans, but differs in the crown reorientation and their enclosure directly between roots of predecessor saw-teeth. Schizorhiza saw-tooth development is decoupled from the jaw teeth and their replacement, dependent on a dental lamina. This highly specialized rostral saw, derived from diversification of skin denticles, is distinct from the dentition and demonstrates the potential developmental plasticity of skin denticles. © 2015 The Authors.

Muscles advance the teeth in sand dollars and other sea urchins

PubMed Central

Ellers, O.; Telford, M.

1997-01-01

We demonstrate the action of the dental promoter muscles in advancing the continuously growing teeth of sand dollars and sea urchins. Teeth wear at the occlusal end, while new calcite is added to the opposite end. Dental ligaments rigidly hold teeth during chewing, but soften and reform during advancement. The source of forces that advance the teeth was unknown until our discovery of the dental promoter muscles. The muscles, which underly the tooth, attach centrally to the stereom of the pyramid of the Aristotle's lantern (jaw) and peripherally to a membrane that covers the distal end of the tooth. The muscles shorten along an axis nearly parallel to the long axis of the tooth. We stimulated contraction by addition of acetylcholine, with increasing concentrations of acetylcholine generating higher forces. Forces exerted by this muscle are appropriate for its size and are 1000 times lower than forces exerted by interpyramidal muscles that generate chewing forces. In sand dollars, a single muscle contraction of the dental promoter muscle can account for half the mean daily advancement of the teeth.

Posterior dental size reduction in hominids: the Atapuerca evidence.

PubMed

Bermúdez de Castro, J M; Nicolas, M E

1995-04-01

In order to reassess previous hypotheses concerning dental size reduction of the posterior teeth during Pleistocene human evolution, current fossil dental evidence is examined. This evidence includes the large sample of hominid teeth found in recent excavations (1984-1993) in the Sima de los Huesos Middle Pleistocene cave site of the Sierra de Atapuerca (Burgos, Spain). The lower fourth premolars and molars of the Atapuerca hominids, probably older than 300 Kyr, have dimensions similar to those of modern humans. Further, these hominids share the derived state of other features of the posterior teeth with modern humans, such as a similar relative molar size and frequent absence of the hypoconulid, thus suggesting a possible case of parallelism. We believe that dietary changes allowed size reduction of the posterior teeth during the Middle Pleistocene, and the present evidence suggests that the selective pressures that operated on the size variability of these teeth were less restrictive than what is assumed by previous models of dental reduction. Thus, the causal relationship between tooth size decrease and changes in food-preparation techniques during the Pleistocene should be reconsidered. Moreover, the present evidence indicates that the differential reduction of the molars cannot be explained in terms of restriction of available growth space. The molar crown area measurements of a modern human sample were also investigated. The results of this study, as well as previous similar analyses, suggest that a decrease of the rate of cell proliferation, which affected the later-forming crown regions to a greater extent, may be the biological process responsible for the general and differential dental size reduction that occurred during human evolution.

Image-Based 3d Reconstruction and Analysis for Orthodontia

NASA Astrophysics Data System (ADS)

Knyaz, V. A.

2012-08-01

Among the main tasks of orthodontia are analysis of teeth arches and treatment planning for providing correct position for every tooth. The treatment plan is based on measurement of teeth parameters and designing perfect teeth arch curve which teeth are to create after treatment. The most common technique for teeth moving uses standard brackets which put on teeth and a wire of given shape which is clamped by these brackets for producing necessary forces to every tooth for moving it in given direction. The disadvantages of standard bracket technique are low accuracy of tooth dimensions measurements and problems with applying standard approach for wide variety of complex orthodontic cases. The image-based technique for orthodontic planning, treatment and documenting aimed at overcoming these disadvantages is proposed. The proposed approach provides performing accurate measurements of teeth parameters needed for adequate planning, designing correct teeth position and monitoring treatment process. The developed technique applies photogrammetric means for teeth arch 3D model generation, brackets position determination and teeth shifting analysis.

Monitoring of typodont root movement via crown superimposition of single cone-beam computed tomography and consecutive intraoral scans.

PubMed

Lee, Robert J; Pham, John; Choy, Michael; Weissheimer, Andre; Dougherty, Harry L; Sameshima, Glenn T; Tong, Hongsheng

2014-03-01

The purpose of this study was to develop a new methodology to visualize in 3 dimensions whole teeth, including the roots, at any moment during orthodontic treatment without the need for multiple cone-beam computed tomography (CBCT) scans. An extraoral typodont model was created using extracted teeth placed in a wax base. These teeth were arranged to represent a typical malocclusion. Initial records of the malocclusion, including CBCT and intraoral surface scans, were taken. Threshold segmentation of the CBCT was performed to generate a 3-dimensional virtual model. This model and the intraoral surface scan model were superimposed to generate a complete set of digital composite teeth composed of high-resolution surface scan crowns sutured to the CBCT roots. These composite teeth were individually isolated from their respective arches for single-tooth manipulations. Orthodontic treatment for the malocclusion typodont model was performed, and posttreatment intraoral surface scans before and after bracket removal were taken. A CBCT scan after bracket removal was also obtained. The isolated composite teeth were individually superimposed onto the posttreatment surface scan, creating the expected root position setup. To validate this setup, it was compared with the posttreatment CBCT scan, which showed the true positions of the roots. Color displacement maps were generated to confirm accurate crown superimpositions and to measure the discrepancies between the expected and the true root positions. Color displacement maps through crown superimpositions showed differences between the expected and true root positions of 0.1678 ± 0.3178 mm for the maxillary teeth and 0.1140 ± 0.1587 mm for the mandibular teeth with brackets. Once the brackets were removed, differences of 0.1634 ± 0.3204 mm for the maxillary teeth and 0.0902 ± 0.2505 mm for the mandibular teeth were found. A new reliable approach was demonstrated in an ex-vivo typdont model to have the potential to track the 3-dimensional positions of whole teeth including the roots, with only the initial CBCT scan and consecutive intraoral scans. Since the presence of brackets in the intraoral scan had a minimal influence in the analysis, this method can be applied at any stage of orthodontic treatment. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Evolution of long-toothed fishes and the changing nature of fish-benthos interactions on coral reefs.

PubMed

Bellwood, David R; Hoey, Andrew S; Bellwood, Orpha; Goatley, Christopher H R

2014-01-01

Interactions between fishes and the benthos have shaped the development of marine ecosystems since at least the early Mesozoic. Here, using the morphology of fish teeth as an indicator of feeding abilities, we quantify changes over the last 240 million years of reef fish evolution. Fossil and extant coral reef fish assemblages reveal exceptional stasis in tooth design over time, with one notable exception, a distinct long-toothed form. Arising only in the last 40 million years, these long-toothed fishes have bypassed the invertebrate link in the food chain, feeding directly on benthic particulate material. With the appearance of elongated teeth, these specialized detritivores have moved from eating invertebrates to eating the food of invertebrates. Over evolutionary time, fishes have slid back down the food chain.

Simulation of a flow around biting teeth

NASA Astrophysics Data System (ADS)

Narusawa, Hideaki; Yamamoto, Eriko; Kuwahara, Kunio

2008-11-01

We simulated a flow around biting teeth. The decayed tooth is a disease that a majority of people are annoyed. These are often generated from a deep groove at occlusal surface. It is known that a person who bites well doesn't suffer from a decayed tooth easily. Biting forces reach as much as 60 kg/cm^2 by an adult male, and when chewing, upper and lower teeth approach to bite by those forces. The crushed food mixed with saliva becomes high viscosity fluid, and is pushed out of ditches of teeth in the direction of the cheek or the tongue. Teeth with complex three dimension curved surface are thought to form venturi at this time, and to generate big pressure partially. An excellent dental articulation will possibly help a natural generation of a flow to remove dental plaque, i.e. the cause of the decayed tooth. Moreover, the relation of this flow with the destruction of the filled metal or the polymer is doubted. In this research, we try to clarify the pressure distributions by this flow generation as well as its dynamics when chewing. One of our goals is to enable an objective design of the shape of the dental fillings and the artificial tooth. Tooth has a very small uneven ground and a bluff body. In this case, to calculate a computational numerical simulation to solve the Navier-Stokes equations three dimension Cartesian coordinate system is employed.

Analysis of Structure Destroyed Metal after Diffusion Heat Treatment

NASA Astrophysics Data System (ADS)

Apasov, A. M.; Kozlov, E. V.; Fedoseev, S. N.

2016-08-01

It was accomplished research of the structure steel which carbonitriding and subsequent heat treatment was exposed for its cause's destruction to discover. For measure quality field of metal were used methods optical, appearing electronic microscopy and X-ray diffraction. Therefore one of the principal problems were research phase composition, grain and dislocation structure of a metal the gear teeth. Mechanism of rising hear cracks in the gear teeth on different stages her making and their trajectories of evolution were determined.

Dental histology of Coelophysis bauri and the evolution of tooth attachment tissues in early dinosaurs.

PubMed

Fong, Raymond K M; LeBlanc, Aaron R H; Berman, David S; Reisz, Robert R

2016-07-01

Studies of dinosaur teeth have focused primarily on external crown morphology and thus, use shed or in situ tooth crowns, and are limited to the enamel and dentine dental tissues. As a result, the full suites of periodontal tissues that attach teeth to the jaws remain poorly documented, particularly in early dinosaurs. These tissues are an integral part of the tooth and thus essential to a more complete understanding of dental anatomy, development, and evolution in dinosaurs. To identify the tooth attachment tissues in early dinosaurs, histological thin sections were prepared from the maxilla and dentary of a partial skull of the early theropod Coelophysis bauri from the Upper Triassic (Rhaetian- 209-201 Ma) Whitaker Quarry, New Mexico, USA. As one of the phylogenetically and geologically oldest dinosaurs, it is an ideal candidate for examining dental tissues near the base of the dinosaurian clade. The teeth of C. bauri exhibited a fibrous tooth attachment in which the teeth possessed five tissues: enamel, dentine, cementum, periodontal ligament (PDL), and alveolar bone. Our findings, coupled with those of more recent studies of ornithischian teeth, indicate that a tripartite periodontium, similar to that of crocodilians and mammals, is the plesiomorphic condition for dinosaurs. The occurrence of a tripartite periodontium in dinosaurs adds to the growing consensus that the presence of these tissues is the plesiomorphic condition for the major amniote clades. Furthermore, this study establishes the relative timing of tissue development and growth directions of periodontal tissues and provides the first comparative framework for future studies of dinosaur periodontal development, tooth replacement, and histology. J. Morphol. 277:916-924, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Structure, attachment, replacement and growth of teeth in bluefish, Pomatomus saltatrix (Linnaeus, 1776), a teleost with deeply socketed teeth.

PubMed

Bemis, William E; Giuliano, Anne; McGuire, Betty

2005-01-01

Tooth replacement poses many questions about development, pattern formation, tooth attachment mechanisms, functional morphology and the evolution of vertebrate dentitions. Although most vertebrate species have polyphyodont dentitions, detailed knowledge of tooth structure and replacement is poor for most groups, particularly actinopterygians. We examined the oral dentition of the bluefish, Pomatomus saltatrix, a pelagic and coastal marine predator, using a sample of 50 individuals. The oral teeth are located on the dentary and premaxillary bones, and we scored each tooth locus in the dentary and premaxillary bones using a four-part functional classification: absent (A), incoming (I), functional (F=fully ankylosed) or eroding (E). The homodont oral teeth of Pomatomus are sharp, deeply socketed and firmly ankylosed to the bone of attachment. Replacement is intraosseus and occurs in alternate tooth loci with long waves of replacement passing from rear to front. The much higher percentage of functional as opposed to eroding teeth suggests that replacement rates are low but that individual teeth are quickly lost once erosion begins. Tooth number increases ontogenetically, ranging from 15-31 dentary teeth and 15-39 premaxillary teeth in the sample studied. Teeth increase in size with every replacement cycle. Remodeling of the attachment bone occurs continuously to accommodate growth. New tooth germs originate from a discontinuous dental lamina and migrate from the lingual (dentary) or labial (premaxillary) epithelium through pores in the bone of attachment into the resorption spaces beneath the existing teeth. Pomatomus shares unique aspects of tooth replacement with barracudas and other scombroids and this supports the interpretation that Pomatomus is more closely related to scombroids than to carangoids.

Grooves to tubes: evolution of the venom delivery system in a Late Triassic "reptile"

NASA Astrophysics Data System (ADS)

Mitchell, Jonathan S.; Heckert, Andrew B.; Sues, Hans-Dieter

2010-12-01

Venom delivery systems occur in a wide range of extant and fossil vertebrates and are primarily based on oral adaptations. Teeth range from unmodified (Komodo dragons) to highly specialized fangs similar to hypodermic needles (protero- and solenoglyphous snakes). Developmental biologists have documented evidence for an infolding pathway of fang evolution, where the groove folds over to create the more derived condition. However, the oldest known members of venomous clades retain the same condition as their extant relatives, resulting in no fossil evidence for the transition. Based on a comparison of previously known specimens with newly discovered teeth from North Carolina, we describe a new species of the Late Triassic archosauriform Uatchitodon and provide detailed analyses that provide evidence for both venom conduction and document a complete structural series from shallow grooves to fully enclosed tubular canals. While known only from teeth, Uatchitodon is highly diagnostic in possessing compound serrations and for having two venom canals on each tooth in the dentition. Further, although not a snake, Uatchitodon sheds light on the evolutionary trajectory of venom delivery systems in amniotes and provide solid evidence for venom conduction in archosaur-line diapsids.

Grading and quantification of dental fluorosis in zebrafish larva.

PubMed

Zhang, Yutao; Zhang, Yanli; Zheng, Xueni; Xu, Rongchen; He, Huiming; Duan, Xiaohong

2016-10-01

The prevalence and severity of dental fluorosis in primary teeth are different from permanent teeth. Previous animal models of dental fluorosis mainly focus on juvenile rats, mice and zebrafish. Our experiment aims to set a dental fluorosis model using zebrafish larva and explore the characteristics of the first generation teeth by fluoride treatment. After the zebrafish eggs were laid, they were exposed to excess fluoride (19ppm, 38ppm and 76ppm) for five days. The morphological characteristics of first generation teeth were examined by H&E staining, whole-mount alizarin red and alcian blue staining, and scanning electron microscope (SEM) technique. With whole-mount alizarin red and alcian blue staining, the tooth cusps presented red in normal control. 19ppm and 38ppmm fluoride resulted in extensive red staining from tooth cusps to the lower 1/3 of teeth. 76ppm fluoride caused malformed teeth with uneven red staining. H&E staining showed that excess fluoride caused cystic-like changes in 38ppm and 76ppm groups. SEM revealed the dose dependent pathological changes in zebrafish enameloid with fluoride treatment. Based on SEM findings, we set 0-4 dental fluorosis index (DFI) score to label the severity of dental fluorosis. Excess fluoride presented a dose dependent fluorosis changes in the teeth of zebrafish larva. The DFI scores in our experiment reflect dose dependent fluorosis changes in a good way and will benefit the future research of dental fluorosis. Copyright © 2016 Elsevier Ltd. All rights reserved.

Transformation and diversification in early mammal evolution.

PubMed

Luo, Zhe-Xi

2007-12-13

Evolution of the earliest mammals shows successive episodes of diversification. Lineage-splitting in Mesozoic mammals is coupled with many independent evolutionary experiments and ecological specializations. Classic scenarios of mammalian morphological evolution tend to posit an orderly acquisition of key evolutionary innovations leading to adaptive diversification, but newly discovered fossils show that evolution of such key characters as the middle ear and the tribosphenic teeth is far more labile among Mesozoic mammals. Successive diversifications of Mesozoic mammal groups multiplied the opportunities for many dead-end lineages to iteratively evolve developmental homoplasies and convergent ecological specializations, parallel to those in modern mammal groups.

Histological evidence for a dynamic dental battery in hadrosaurid dinosaurs.

PubMed

Bramble, Katherine; LeBlanc, Aaron R H; Lamoureux, Denis O; Wosik, Mateusz; Currie, Philip J

2017-11-17

The first histological study of an entire hadrosaurid dental battery provides a comprehensive look at tooth movement within this complex structure. Previous studies have focused on isolated teeth, or in-situ batteries, but this is the first study to examine an entire dental battery of any dinosaur. The absence of direct tooth-to-tooth contact across the entire battery and a unique arrangement of the dental tissues in hadrosaurids led us to compare their teeth with the ever-growing incisors of mammals. The similarity in the distributions of tissues along the incisor, coupled with continuous eruption, make for helpful comparisons to hadrosaurid teeth. The mammalian ever-growing incisor can be used as a model to extrapolate the soft tissue connections and eruptive mechanisms within the hadrosaurid dental battery. Serial sections across the adult dental battery reveal signs of gradual ontogenetic tooth migration. Extensive remodeling of the alveolar septa and the anteroposterior displacement of successive generations of teeth highlight the gradual migration of tooth generations within the battery. These eruptive and ontogenetic tooth movements would not be possible without a ligamentous connection between successive teeth and the jaws, underscoring the dynamic nature of one of the most unique and complex dental systems in vertebrate history.

Computing Surface Coordinates Of Face-Milled Spiral-Bevel Gear Teeth

NASA Technical Reports Server (NTRS)

Handschuh, Robert F.; Litvin, Faydor L.

1995-01-01

Surface coordinates of face-milled spiral-bevel gear teeth computed by method involving numerical solution of governing equations. Needed to generate mathematical models of tooth surfaces for use in finite-element analyses of stresses, strains, and vibrations in meshing spiral-bevel gears.

Systems and Methods for Implementing Bulk Metallic Glass-Based Strain Wave Gears and Strain Wave Gear Components

NASA Technical Reports Server (NTRS)

Hofmann, Douglas C. (Inventor); Wilcox, Brian (Inventor)

2016-01-01

Bulk metallic glass-based strain wave gears and strain wave gear components. In one embodiment, a strain wave gear includes: a wave generator; a flexspline that itself includes a first set of gear teeth; and a circular spline that itself includes a second set of gear teeth; where at least one of the wave generator, the flexspline, and the circular spline, includes a bulk metallic glass-based material.

Quantification of intrusive/retraction force and moment generated during en-masse retraction of maxillary anterior teeth using mini-implants: A conceptual approach.

PubMed

Felicita, A Sumathi

2017-01-01

The aim of the present study was to clarify the biomechanics of en-masse retraction of the upper anterior teeth and attempt to quantify the different forces and moments generated using mini-implants and to calculate the amount of applied force optimal for en-masse intrusion and retraction using mini-implants. The optimum force required for en-masse intrusion and retraction can be calculated by using simple mathematical formulae. Depending on the position of the mini-implant and the relationship of the attachment to the center of resistance of the anterior segment, different clinical outcomes are encountered. Using certain mathematical formulae, accurate measurements of the magnitude of force and moment generated on the teeth can be calculated for each clinical outcome. Optimum force for en-masse intrusion and retraction of maxillary anterior teeth is 212 grams per side. Force applied at an angle of 5o to 16o from the occlusal plane produce intrusive and retraction force components that are within the physiologic limit. Different clinical outcomes are encountered depending on the position of the mini-implant and the length of the attachment. It is possible to calculate the forces and moments generated for any given magnitude of applied force. The orthodontist can apply the basic biomechanical principles mentioned in this study to calculate the forces and moments for different hypothetical clinical scenarios.

Initial forces experienced by the anterior and posterior teeth during dental-anchored or skeletal-anchored en masse retraction in vitro.

PubMed

Lee, David; Heo, Giseon; El-Bialy, Tarek; Carey, Jason P; Major, Paul W; Romanyk, Dan L

2017-07-01

To investigate initial forces acting on teeth around the arch during en masse retraction using an in vitro Orthodontic SIMulator (OSIM). The OSIM was used to represent the full maxillary arch in a case wherein both first premolars had been extracted. Dental and skeletal anchorage to a posted archwire and skeletal anchorage to a 10-mm power arm were all simulated. A 0.019 × 0.025-inch stainless steel archwire was used in all cases, and 15-mm light nickel-titanium springs were activated to approximately 150 g on both sides of the arch. A sample size of n = 40 springs were tested for each of the three groups. Multivariate analysis of variance (α = 0.05) was used to determine differences between treatment groups. In the anterior segment, it was found that skeletal anchorage with power arms generated the largest retraction force (P < .001). The largest vertical forces on the unit were generated using skeletal anchorage, followed by skeletal anchorage with power arms, and finally dental anchorage. Power arms were found to generate larger intrusive forces on the lateral incisors and extrusive forces on the canines than on other groups. For the posterior anchorage unit, dental anchorage generated the largest protraction and palatal forces. Negligible forces were measured for both skeletal anchorage groups. Vertical forces on the posterior unit were minimal in all cases (<0.1 N). All retraction methods produced sufficient forces to retract the anterior teeth during en masse retraction. Skeletal anchorage reduced forces on the posterior teeth but introduced greater vertical forces on the anterior teeth.

The Evolution of Dental Materials for Hybrid Prosthesis

PubMed Central

Gonzalez, Jorge

2014-01-01

Since the immemorial, the replacement of missing teeth has been a medical and cosmetic necessity for human kind. Nowadays, middle-aged population groups have experienced improved oral health, as compared to previous generations, and the percentage of edentulous adults can be expected to further decline. However, with the continued increase in the number of older adult population, it is anticipated that the need for some form of full-mouth restoration might increase from 53.8 million in 1991 to 61 million in 2020 [1]. Denture prosthetics has undergone many development stages since the first dentures were fabricated. The introduction of computer-aided design/computer aided manufacturing (CAD/CAM) has resulted in a more accurate manufacturing of prosthetic frameworks, greater accuracy of dental restorations, and in particular, implant supported prosthesis. PMID:24893781

Development of elements of the condition monitoring system of turbo generators of thermal power stations and nuclear power plants

NASA Astrophysics Data System (ADS)

Kumenko, A. I.; Kostyukov, V. N.; Kuz'minykh, N. Yu.; Boichenko, S. N.; Timin, A. V.

2017-08-01

The rationale is given for the improvement of the regulatory framework for the use of shaft sensors for the in-service condition monitoring of turbo generators and the development of control systems of shaft surfacing and misalignments of supports. A modern concept and a set of methods are proposed for the condition monitoring of the "shaft line-thrust bearing oil film-turbo generator supports" system elements based on the domestic COMPACS® technology. The system raw data are design, technology, installation, and operating parameters of the turbo generator as well as measured parameters of the absolute vibration of supports and mechanical quantities, relative displacements and relative vibration of the rotor teeth in accordance with GOST R 55263-2012. The precalculated shaft line assembly line in the cold state, the nominal parameters of rotor teeth positions on the dynamic equilibrium curve, the static and dynamic characteristics of the oil film of thrust bearings, and the shaft line stiffness matrix of unit support displacements have been introduced into the system. Using the COMPACS-T system, it is planned to measure positions and oscillations of rotor teeth, to count corresponding static and dynamic characteristics of the oil film, and the static and dynamic loads in the supports in real time. Using the obtained data, the system must determine the misalignments of supports and corrective alignments of rotors of coupling halves, voltages in rotor teeth, welds, and bolts of the coupling halves, and provide automatic conclusion if condition monitoring parameters correspond to standard values. A part of the methodological support for the proposed system is presented, including methods for determining static reactions of supports under load, the method for determining shaft line stiffness matrices, and the method for solving the inverse problem, i.e., the determination of the misalignments of the supports by measurements of rotor teeth relative positions in bearing housings. The procedure for calculating misalignments of turbo generator shaft line supports is set out.

The Mosasaur Tooth Attachment Apparatus as Paradigm for the Evolution of the Gnathostome Periodontium

PubMed Central

Luan, Xianghong; Walker, Cameron; Dangaria, Smit; Ito, Yoshihiro; Druzinsky, Robert; Jarosius, Kristina; Lesot, Herve; Rieppel, Olivier

2009-01-01

Vertebrate teeth are attached to jaws by a variety of mechanisms, including acrodont, pleurodont, and thecodont modes of attachment. Recent studies have suggested that various modes of attachment exist within each sub-category. Especially squamates feature a broad diversity of modes of attachment. Here we have investigated tooth attachment tissues in the late cretaceous mosasaur Clidastes and compared mosasaur tooth attachment with modes of attachment found in other extant reptiles. Using histologic analysis of ultrathin ground sections, four distinct mineralized tissues that anchor mosasaur teeth to the jaw were identified: (i) an acellular cementum layer at the interface between root and cellular cementum, (ii) a massive cone consisting of trabecular cellular cementum, (iii) the mineralized periodontal ligament containing mineralized Sharpey’s fibers, and (iv) the interdental ridges connecting adjacent teeth. The complex, multilayered attachment apparatus in mosasaurs was compared with attachment tissues in extant reptiles, including Iguana and Caiman. Based on our comparative analysis we postulate the presence of a quadruple-layer tissue architecture underlying reptilian tooth attachment, comprised of acellular cementum, cellular cementum, mineralized periodontal ligament, and interdental ridge (alveolar bone). We propose that the mineralization status of the periodontal ligament is a dynamic feature in vertebrate evolution subject to functional adaptation. PMID:19469852

Three-body wear of resin denture teeth with and without nanofillers.

PubMed

Stober, Thomas; Henninger, Moritz; Schmitter, Marc; Pritsch, Maria; Rammelsberg, Peter

2010-02-01

The wear behavior of newly developed denture teeth with nanofillers may be different from teeth with other chemical formulations. The purpose of this study was to examine the 3-body wear resistance of 11 different commercially available resin denture teeth. The materials tested were conventional (SR Orthotyp PE, Orthognath) and cross-linked acrylic resin teeth without inorganic fillers (Premium 8, SR Postaris DCL, Trubyte Portrait, Artiplus), composite resin teeth with inorganic fillers (SR Orthosit PE, Vitapan), and composite resin teeth (experimental materials) with inorganic nanofillers (NC Veracia Posterior, e-Ha, Mondial). Human enamel and a ceramic denture tooth (Lumin Vacuum) were used as reference materials. The 3-body wear test was performed in a wear machine developed by the Academic Center for Dentistry Amsterdam (ACTA), with millet suspension acting as an abrasive medium (n=10, test load: 15 N, slip rate: 20%, number of cycles: 100,000). Wear was determined with the aid of a profilometer. Data were analyzed with the Kruskal-Wallis test and Mann-Whitney U test using the closed testing approach (significance level for familywise error rate, alpha=.05). None of the acrylic and composite resin materials tested in this study demonstrated the 3-body wear resistance of ceramic teeth or human enamel. Teeth with inorganic fillers demonstrated significantly lower wear values than conventional or cross-linked acrylic resin teeth without fillers. Composite resin teeth with traditional fillers showed significantly lower wear than composite resin teeth with nanofillers. Denture teeth with and without inorganic fillers differed significantly with regard to the degree of wear generated in the ACTA wear simulator. The incorporation of nanofillers did not improve the wear resistance compared to teeth with traditional fillers.

In vitro study of heat production during power reduction of equine mandibular teeth.

PubMed

Allen, Martin L; Baker, Gordon J; Freeman, David E; Holmes, Kenneth R; Marretta, Sandra Manfra; Scoggins, R Dean; Constable, Peter

2004-04-01

To measure the amount of heat generated during 3 methods of equine dental reduction with power instruments. In vitro study. 30 premolar and molar teeth removed from mandibles of 8 equine heads collected at an abbatoir. 38-gauge copper-constantan thermocouples were inserted into the lingual side of each tooth 15 mm (proximal) and 25 mm (distal) from the occlusal surface, at a depth of 5 mm, which placed the tip close to the pulp chamber. Group-NC1 (n = 10) teeth were ground for 1 minute without coolant, group-NC2 (10) teeth were ground for 2 minutes without coolant, and group-C2 (10) teeth were ground for 2 minutes with water for coolant. Mean temperature increase was 1.2 degrees C at the distal thermocouple and 6.6 degrees C at the proximal thermocouple for group-NC1 teeth, 4.1 degrees C at the distal thermocouple and 24.3 degrees C at the proximal thermocouple for group-NC2 teeth, and 0.8 degrees C at the distal thermocouple and -0.1 degrees C at the proximal thermocouple for group-C2 teeth. In general, an increase of 5 degrees C in human teeth is considered the maximum increase before there is permanent damage to tooth pulp. In group-NC2 teeth, temperature increased above this limit by several degrees, whereas in group-C2 teeth, there was little or no temperature increase. Our results suggest that major reduction of equine teeth by use of power instruments causes thermal changes that may cause irreversible pulp damage unless water cooling is used.

Microbial Analysis of Bite Marks by Sequence Comparison of Streptococcal DNA

PubMed Central

Kennedy, Darnell M.; Stanton, Jo-Ann L.; García, José A.; Mason, Chris; Rand, Christy J.; Kieser, Jules A.; Tompkins, Geoffrey R.

2012-01-01

Bite mark injuries often feature in violent crimes. Conventional morphometric methods for the forensic analysis of bite marks involve elements of subjective interpretation that threaten the credibility of this field. Human DNA recovered from bite marks has the highest evidentiary value, however recovery can be compromised by salivary components. This study assessed the feasibility of matching bacterial DNA sequences amplified from experimental bite marks to those obtained from the teeth responsible, with the aim of evaluating the capability of three genomic regions of streptococcal DNA to discriminate between participant samples. Bite mark and teeth swabs were collected from 16 participants. Bacterial DNA was extracted to provide the template for PCR primers specific for streptococcal 16S ribosomal RNA (16S rRNA) gene, 16S–23S intergenic spacer (ITS) and RNA polymerase beta subunit (rpoB). High throughput sequencing (GS FLX 454), followed by stringent quality filtering, generated reads from bite marks for comparison to those generated from teeth samples. For all three regions, the greatest overlaps of identical reads were between bite mark samples and the corresponding teeth samples. The average proportions of reads identical between bite mark and corresponding teeth samples were 0.31, 0.41 and 0.31, and for non-corresponding samples were 0.11, 0.20 and 0.016, for 16S rRNA, ITS and rpoB, respectively. The probabilities of correctly distinguishing matching and non-matching teeth samples were 0.92 for ITS, 0.99 for 16S rRNA and 1.0 for rpoB. These findings strongly support the tenet that bacterial DNA amplified from bite marks and teeth can provide corroborating information in the identification of assailants. PMID:23284761

Continuous tooth generation in mouse is induced by activated epithelial Wnt/β-catenin signaling

PubMed Central

Järvinen, Elina; Salazar-Ciudad, Isaac; Birchmeier, Walter; Taketo, Makoto M.; Jernvall, Jukka; Thesleff, Irma

2006-01-01

The single replacement from milk teeth to permanent teeth makes mammalian teeth different from teeth of most nonmammalian vertebrates and other epithelial organs such as hair and feathers, whose continuous replacement has been linked to Wnt signaling. Here we show that mouse tooth buds expressing stabilized β-catenin in epithelium give rise to dozens of teeth. The molar crowns, however, are typically simplified unicusped cones. We demonstrate that the supernumerary teeth develop by a renewal process where new signaling centers, the enamel knots, bud off from the existing dental epithelium. The basic aspects of the unlocked tooth renewal can be reproduced with a computer model on tooth development by increasing the intrinsic level of activator production, supporting the role of β-catenin pathway as an upstream activator of enamel knot formation. These results may implicate Wnt signaling in tooth renewal, a capacity that was all but lost when mammals evolved progressively more complicated tooth shapes. PMID:17121988

The Rack-Gear Tool Generation Modelling. Non-Analytical Method Developed in CATIA, Using the Relative Generating Trajectories Method

NASA Astrophysics Data System (ADS)

Teodor, V. G.; Baroiu, N.; Susac, F.; Oancea, N.

2016-11-01

The modelling of a curl of surfaces associated with a pair of rolling centrodes, when it is known the profile of the rack-gear's teeth profile, by direct measuring, as a coordinate matrix, has as goal the determining of the generating quality for an imposed kinematics of the relative motion of tool regarding the blank. In this way, it is possible to determine the generating geometrical error, as a base of the total error. The generation modelling allows highlighting the potential errors of the generating tool, in order to correct its profile, previously to use the tool in machining process. A method developed in CATIA is proposed, based on a new method, namely the method of “relative generating trajectories”. They are presented the analytical foundation, as so as some application for knows models of rack-gear type tools used on Maag teething machines.

Multivariate Analyses of Small Theropod Dinosaur Teeth and Implications for Paleoecological Turnover through Time

PubMed Central

Larson, Derek W.; Currie, Philip J.

2013-01-01

Isolated small theropod teeth are abundant in vertebrate microfossil assemblages, and are frequently used in studies of species diversity in ancient ecosystems. However, determining the taxonomic affinities of these teeth is problematic due to an absence of associated diagnostic skeletal material. Species such as Dromaeosaurus albertensis, Richardoestesia gilmorei, and Saurornitholestes langstoni are known from skeletal remains that have been recovered exclusively from the Dinosaur Park Formation (Campanian). It is therefore likely that teeth from different formations widely disparate in age or geographic position are not referable to these species. Tooth taxa without any associated skeletal material, such as Paronychodon lacustris and Richardoestesia isosceles, have also been identified from multiple localities of disparate ages throughout the Late Cretaceous. To address this problem, a dataset of measurements of 1183 small theropod teeth (the most specimen-rich theropod tooth dataset ever constructed) from North America ranging in age from Santonian through Maastrichtian were analyzed using multivariate statistical methods: canonical variate analysis, pairwise discriminant function analysis, and multivariate analysis of variance. The results indicate that teeth referred to the same taxon from different formations are often quantitatively distinct. In contrast, isolated teeth found in time equivalent formations are not quantitatively distinguishable from each other. These results support the hypothesis that small theropod taxa, like other dinosaurs in the Late Cretaceous, tend to be exclusive to discrete host formations. The methods outlined have great potential for future studies of isolated teeth worldwide, and may be the most useful non-destructive technique known of extracting the most data possible from isolated and fragmentary specimens. The ability to accurately assess species diversity and turnover through time based on isolated teeth will help illuminate patterns of evolution and extinction in these groups and potentially others in greater detail than has previously been thought possible without more complete skeletal material. PMID:23372708

Morphological and molecular evidence for a stepwise evolutionary transition from teeth to baleen in mysticete whales.

PubMed

Deméré, Thomas A; McGowen, Michael R; Berta, Annalisa; Gatesy, John

2008-02-01

The origin of baleen in mysticete whales represents a major transition in the phylogenetic history of Cetacea. This key specialization, a keratinous sieve that enables filter-feeding, permitted exploitation of a new ecological niche and heralded the evolution of modern baleen-bearing whales, the largest animals on Earth. To date, all formally described mysticete fossils conform to two types: toothed species from Oligocene-age rocks ( approximately 24 to 34 million years old) and toothless species that presumably utilized baleen to feed (Recent to approximately 30 million years old). Here, we show that several Oligocene toothed mysticetes have nutrient foramina and associated sulci on the lateral portions of their palates, homologous structures in extant mysticetes house vessels that nourish baleen. The simultaneous occurrence of teeth and nutrient foramina implies that both teeth and baleen were present in these early mysticetes. Phylogenetic analyses of a supermatrix that includes extinct taxa and new data for 11 nuclear genes consistently resolve relationships at the base of Mysticeti. The combined data set of 27,340 characters supports a stepwise transition from a toothed ancestor, to a mosaic intermediate with both teeth and baleen, to modern baleen whales that lack an adult dentition but retain developmental and genetic evidence of their ancestral toothed heritage. Comparative sequence data for ENAM (enamelin) and AMBN (ameloblastin) indicate that enamel-specific loci are present in Mysticeti but have degraded to pseudogenes in this group. The dramatic transformation in mysticete feeding anatomy documents an apparently rare, stepwise mode of evolution in which a composite phenotype bridged the gap between primitive and derived morphologies; a combination of fossil and molecular evidence provides a multifaceted record of this macroevolutionary pattern.

An aegialodontid upper molar and the evolution of mammal dentition.

PubMed

Lopatin, Alexey V; Averianov, Alexander O

2006-08-25

The most obvious key synapomorphy of the therian mammals is the tribosphenic pattern of their molars. Tribosphenic teeth are capable of both shearing and grinding, which substantially increase effectiveness of food processing and, in turn, permit evolution of a wide range of dietary specializations. Functional tribospheny developed repeatedly during mammalian evolution but was successful only in the Boreosphenida. The earliest stage in the development of boreosphenidan tribospheny has remained poorly understood, being documented only by lower molars of aegialodontids. Here, we report a known upper molar of an aegialodontid mammal, Kielantherium, from the Early Cretaceous of Mongolia.

LaURGE: Louisiana Undergraduate Recruitment and Geoscience Education

NASA Astrophysics Data System (ADS)

Nunn, J. A.; Agnew, J.

2009-12-01

NSF and the Shell Foundation sponsor a program called Louisiana Undergraduate Recruitment and Geoscience Education (LaURGE). Goals of LaURGE are: 1) Interweave geoscience education into the existing curriculum; 2) Provide teachers with lesson plans that promote interest in geoscience, critical thinking by students, and are consistent with current knowledge in geoscience; and 3) Provide teachers with supplies that make these lessons the highlights of the course. Biology workshops were held at LSU in Baton Rouge and Centenary College in Shreveport in July 2009. 25 teachers including 5 African-Americans attended the workshops. Teachers were from public and private schools in seven different parishes. Teacher experience ranged from 3 years to 40 years. Courses impacted are Biology, Honors Biology, AP Biology, and Environmental Science. The workshops began with a field trip to Mississippi to collect fossil shark teeth and create a virtual field trip. After the field trip, teachers do a series of activities on fossil shark teeth to illustrate evolution and introduce basic concepts such as geologic time, superposition, and faunal succession. Teachers were also given a $200 budget from which to select fossils for use in their classrooms. One of our exercises explores the evolution of the megatoothed shark lineage leading to Carcharocles megalodon, the largest predatory shark in history with teeth up to 17 cm long. Megatoothed shark teeth have an excellent fossil record and show continuous transitions in morphology from the Eocene to Pliocene. We take advantage of the curiosity of sharks shared by most people, and allow teachers to explore the variations among different shark teeth and to explain the causes of those variations. Objectives are to have teachers (and their students): 1) sort fossil shark teeth into biologically reasonable species; 2) form hypotheses about evolutionary relationships; and 3) describe and interpret evolutionary trends in the fossil Megatoothed lineage. The exercise concludes with discussion of the environmental and biotic events occurring between the Eocene and Miocene epochs that may have caused evolutionary changes in the megatooth shark’s teeth. Other topics covered include radiometric age dating, biogeochemical cycles, and human impact on the carbon and sulfur cycles. Pretests and posttests were administered to assess effectiveness of the program as well as identify teacher misconceptions. This information will be used in future workshops. NSF funding will allow the biology workshops to be repeated in 2010. In addition, a new workshop for physics teachers will be introduced in 2010.

Vienna - Chicago

PubMed Central

Luan, Xianghong; Diekwisch, Thomas G.H.

2009-01-01

The discussion over the roles of genes and environment on the phenotypical specification of organisms has held a central role in science philosophy since the late 19th century and has re-emerged in today’s debate over genetic determinism and developmental plasticity. In fin-de-siecle Vienna, this debate coincided with a philosophical debate over empiricism/materialism versus idealism/vitalism. Turn-of-the-century Vienna’s highly interdisciplinary environment was also the birthplace for the model system of the unopposed molar. The un-opposed molar system features new tissue formation at the roots of teeth and tooth drift once opposing teeth are lost. The un-opposed molar model system was revived by a group of Viennese scientists that left Vienna during the Nazi period to address Vienna’s questions about evolution and heredity and about genes and environment in Chicago’s post-WWII scientific exile community. Here we are using the colorful history of the un-opposed molar to investigate the role of culture and method in the scientific evolution of a model system. PMID:17621674

Another one bites the dust: faecal silica levels in large herbivores correlate with high-crowned teeth

PubMed Central

Hummel, Jürgen; Findeisen, Eva; Südekum, Karl-Heinz; Ruf, Irina; Kaiser, Thomas M.; Bucher, Martin; Clauss, Marcus; Codron, Daryl

2011-01-01

The circumstances of the evolution of hypsodonty (= high-crowned teeth) are a bone of contention. Hypsodonty is usually linked to diet abrasiveness, either from siliceous phytoliths (monocotyledons) or from grit (dusty environments). However, any empirical quantitative approach testing the relation of ingested silica and hypsodonty is lacking. In this study, faecal silica content was quantified as acid detergent insoluble ash and used as proxy for silica ingested by large African herbivores of different digestive types, feeding strategies and hypsodonty levels. Separate sample sets were used for the dry (n = 15 species) and wet (n = 13 species) season. Average faecal silica contents were 17–46 g kg−1 dry matter (DM) for browsing and 52–163 g kg−1 DM for grazing herbivores. No difference was detected between the wet (97.5 ± 14.4 g kg−1 DM) and dry season (93.5 ± 13.7 g kg−1 DM) faecal silica. In a phylogenetically controlled analysis, a strong positive correlation (dry season r = 0.80, p < 0.0005; wet season r = 0.74, p < 0.005) was found between hypsodonty index and faecal silica levels. While surprisingly our results do not indicate major seasonal changes in silica ingested, the correlation of faecal silica and hypsodonty supports a scenario of a dominant role of abrasive silica in the evolution of high-crowned teeth. PMID:21068036

Assessment of dental caries prevention program applied to a cohort of elementary school children of Kebemer, a city in Senegal.

PubMed

Daouda, Faye; Aïda, Kanouté; Mbacké, Lo Cheikh; Mamadou, Mbaye

2016-08-01

Dental caries is frequently observed in children, particularly among those residing in developing countries. The most adapted strategies against this pathology remains prevention based on information, education, and communication (IEC), as well as on early diagnosis and treatment. We carried out a study that aimed to analyze the development of dental caries in a cohort of school children followed during their primary education. The objective was to assess the evolution of the dental status of a cohort of students during their elementary curriculum. A cohort of school children was followed during 6 years from the first grade to the sixth grade. Monitoring of these school children focused every year on IEC based on learning methods of brushing messages, dietary advice, systematic visits, fluoride use, and primary dental care. During the school year, the students were periodically subjected to education and communication briefings (IEC). Primary care consisted of extracting and descaling rhizalyzed teeth in the same period. The data from this review were collected using the World Health Organization questionnaire, and statistical analysis was performed with the software Epi-info version 6.04 d. The mean age of the 171 school children was 6 years in the first grade and 11 years in the sixth grade. In the first grade, the decayed permanent teeth prevalence was 31.6% and the In permanent teeth: Decayed, missing or filled teeth (DMF/T) was 0.47. The decayed primary teeth prevalence was 75% and the in primary teeth: decayed or filled teeth (df/t) 2.23. In the sixth year, the prevalence of decayed permanent teeth was 51% and DMF/T 0.36 whereas the decayed primary teeth prevalence was 12% and the df/t was 0.19. The prevalence of decayed permanent teeth increased from 31.6 to 51% whereas the mean DMF/T was not statistically different between school children of the first and sixth grade class. The promotion of oral health by IEC messages and monitoring of children constitute an effective preventive method for children's oral care.

Loss of teeth and enamel in tetrapods: fossil record, genetic data and morphological adaptations

PubMed Central

Davit-Béal, Tiphaine; Tucker, Abigail S; Sire, Jean-Yves

2009-01-01

Since their recruitment in the oral cavity, approximately 450 million years ago, teeth have been subjected to strong selective constraints due to the crucial role that they play in species survival. It is therefore quite surprising that the ability to develop functional teeth has subsequently been lost several times, independently, in various lineages. In this review, we concentrate our attention on tetrapods, the only vertebrate lineage in which several clades lack functional teeth from birth to adulthood. Indeed, in other lineages, teeth can be absent in adults but be functionally present in larvae and juveniles, can be absent in the oral cavity but exist in the pharyngeal region, or can develop on the upper jaw but be absent on the lower jaw. Here, we analyse the current data on toothless (edentate) tetrapod taxa, including information available on enamel-less species. Firstly, we provide an analysis of the dispersed and fragmentary morphological data published on the various living taxa concerned (and their extinct relatives) with the aim of tracing the origin of tooth or enamel loss, i.e. toads in Lissamphibia, turtles and birds in Sauropsida, and baleen whales, pangolins, anteaters, sloths, armadillos and aardvark in Mammalia. Secondly, we present current hypotheses on the genetic basis of tooth loss in the chicken and thirdly, we try to answer the question of how these taxa have survived tooth loss given the crucial importance of this tool. The loss of teeth (or only enamel) in all of these taxa was not lethal because it was always preceded in evolution by the pre-adaptation of a secondary tool (beak, baleens, elongated adhesive tongues or hypselodonty) useful for improving efficiency in food uptake. The positive selection of such secondary tools would have led to relaxed functional constraints on teeth and would have later compensated for the loss of teeth. These hypotheses raise numerous questions that will hopefully be answered in the near future. PMID:19422426

Unsuspected functional disparity in Devonian fishes revealed by tooth morphometrics?

NASA Astrophysics Data System (ADS)

Gauchey, Samuel; Girard, Catherine; Adnet, Sylvain; Renaud, Sabrina

2014-09-01

The shape of features involved in key biological functions, such as teeth in nutrition, can provide insights into ecological processes even in ancient time, by linking the occupation of the morphological space (disparity) to the occupation of the ecological space. Investigating disparity in radiating groups may provide insights into the ecological diversification underlying evolution of morphological diversity. Actinopterygian fishes initiated their radiation in the Devonian, a period characterized by the diversification of marine ecosystem. Although a former morpho-functional analysis of jaw shape concluded to conservative and poorly diversified morphologies in this early part of their history, fish tooth disparity evidenced here an unsuspected diversity of possible functional significance in the pivotal period of the Late Devonian (Famennian). All teeth being caniniforms, some were stocky and robust, in agreement with expectations for active generalist predators. More surprisingly, elongated teeth also occurred at the beginning of Famennian. Their needle-like shape challenges morpho-functional interpretations by making them fragile in response to bending or torsion. The occurrence of both types of fish teeth during the beginning of the Famennian points to a discrete but real increase in disparity, thus testifying a first burst of feeding specialization despite overall conservative jaw morphology. The disappearance of these needle-like teeth in the Late Famennian might have been related to a relay in dental diversity with abundant co-occurring groups, namely conodonts and chondrichthyans (sharks).

Pulp revascularization of immature permanent teeth: a review of the literature and a proposal of a new clinical protocol.

PubMed

Namour, Mélanie; Theys, Stephanie

2014-01-01

Tissue engineering is a growing field. In the near future, it will probably be possible to generate a complete vital tooth from a single stem cell. Pulp revascularization is dependent on the ability of residual pulp and apical and periodontal stem cells to differentiate. These cells have the ability to generate a highly vascularized and a conjunctive rich living tissue. This one is able to colonize the available pulp space. Revascularization is a new treatment method for immature necrotic permanent teeth. Up to now, apexification procedures were applied for these teeth, using calcium dihydroxide or MTA to produce an artificial apical barrier. However, the pulp revascularization allows the stimulation of the apical development and the root maturation of immature teeth. Two pulp revascularization techniques are used in the literature, one using calcium dihydroxide and the second using a triple antibiotic paste. Based on these two different pulp revascularization protocols, which obtain the desired therapeutic success, the literature will be reviewed and analyzed according to the relevance of their choice of materials. Based on the literature, we propose a new relevant protocol and a new mixture of antibiotics.

Method for Manufacturing Bulk Metallic Glass-Based Strain Wave Gear Components

NASA Technical Reports Server (NTRS)

Hofmann, Douglas C. (Inventor); Wilcox, Brian H. (Inventor)

2017-01-01

Systems and methods in accordance with embodiments of the invention implement bulk metallic glass-based strain wave gears and strain wave gear components. In one embodiment, a method of fabricating a strain wave gear includes: shaping a BMG-based material using a mold in conjunction with one of a thermoplastic forming technique and a casting technique; where the BMG-based material is shaped into one of: a wave generator plug, an inner race, an outer race, a rolling element, a flexspline, a flexspline without a set of gear teeth, a circular spline, a circular spline without a set of gear teeth, a set of gear teeth to be incorporated within a flexspline, and a set of gear teeth to be incorporated within a circular spline.

In vitro investigation of heat transfer phenomenon in human immature teeth.

PubMed

Talebi, Maryam; Moghimi, Sahar; Shafagh, Mina; Kalani, Hadi; Mazhari, Fatemeh

2014-01-01

Background and aims. Heat generated within tooth during clinical dentistry can cause thermally induced damage to hard and soft components of the tooth (enamel, dentin and pulp). Geometrical characteristics of immature teeth are different from those of mature teeth. The purpose of this experimental and theoretical study was to investigate thermal changes in immature permanent teeth during the use of LED light-curing units (LCU). Materials and methods. This study was performed on the second mandibular premolars. This experimental investiga-tion was carried out for recording temperature variations of different sites of tooth and two dimensional finite element models were used for heat transfer phenomenon in immature teeth. Sensitivity analysis and local tests were included in the model validation phase. Results. Overall, thermal stimulation for 30 seconds with a low-intensity LED LCU increased the temperature from 28°C to 38°C in IIT (intact immature tooth) and PIT (cavity-prepared immature tooth). When a high-intensity LED LCU was used, tooth temperature increased from 28°C to 48°C. The results of the experimental tests and mathematical modeling illustrated that using LED LCU on immature teeth did not have any detrimental effect on the pulp temperature. Conclusion. Using LED LCU in immature teeth had no effect on pulp temperature in this study. Sensitivity analysis showed that variations of heat conductivity might affect heat transfer in immature teeth; therefore, further studies are required to determine thermal conductivity of immature teeth.

Evidence of a specialized feeding niche in a Late Triassic ray-finned fish: evolution of multidenticulate teeth and benthic scraping in †Hemicalypterus.

PubMed

Gibson, Sarah Z

2015-04-01

Fishes have evolved to exploit multiple ecological niches. Extant fishes in both marine (e.g., rabbitfishes, surgeonfishes) and freshwater systems (e.g., haplochromine cichlids, characiforms) have evolved specialized, scoop-like, multidenticulate teeth for benthic scraping, feeding primarily on algae. Here, I report evidence of the oldest example of specialized multidenticulate dentition in a ray-finned fish, †Hemicalypterus weiri, from the Upper Triassic Chinle Formation of southeastern Utah (∼210-205 Ma), USA. †H. weiri is a lower actinopterygian species that is phylogenetically remote from modern fishes, and has evolved specialized teeth that converge with those of several living teleost fishes (e.g., characiforms, cichlids, acanthurids, siganids), with a likely function of these teeth being to scrape algae off a rock substrate. This finding contradicts previously held notions that fishes with multicuspid, scoop-like dentition were restricted to teleosts, and indicates that ray-finned fishes were diversifying into different trophic niches and exploring different modes of feeding earlier in their history than previously thought, fundamentally altering our perceptions of the ecological roles of fishes during the Mesozoic.

Microtensile dentin bond strength of fifth with five seventh-generation dentin bonding agents after thermocycling: An in vitro study

PubMed Central

Poptani, Bruhvi; Gohil, K. S.; Ganjiwale, Jaishree; Shukla, Manisha

2012-01-01

Objectives: The objective of this in vitro study was to compare the microtensile dentin bond strength (μTBS) of five seventh-generation dentin bonding agents (DBA) with fifth-generation DBA before and after thermocycling. Materials and Methods: Ten extracted teeth were assigned to fifth generation control group (optibond solo) and each of the five experimental groups namely, Group I (G-Bond) ,Group II (S3 Clearfil), Group III (One Coat 7.0), Group IV (Xeno V), and Group V (Optibond all in one). The crown portions of the teeth were horizontally sectioned below the central groove to expose the dentin. The adhesive resins from all groups were bonded to the teeth with their respective composites. Specimens of sizes 1 × 1 × 6 mm3 were obtained. Fifty specimens that bonded to dentin from each group were selected. Twenty-five of the specimens were tested for debonding without thermocycling and the remaining were subjected to thermocycling followed by μTBS testing. The data were analyzed with one-way ANOVA and Dunnett's-test for comparison with the reference group(Vth Generation). Results: There was no significant difference (P > 0.05) between the fifth- and seventh-generation adhesives before and after thermocycling. The results of our study showed significantly higher value (P < 0.05) of μTBS of seventh-generation Group II (Clearfil S3) compared to the fifth-generation before and after thermocycling. Conclusion: The study demonstrated that the Clearfil S3 bond had the highest μTBS values. In addition, of the five tested seventh-generation adhesive resins were comparable to the fifth-generation DBA. PMID:23230355

Evolution: Fangtastic Venoms Underpin Parasitic Mimicry.

PubMed

Taylor, Martin I

2017-04-24

Venomous teeth are rare in fishes, which typically utilise spines for defence. A new study reveals the evolutionary origins of fangs and venom in the Nemophini blennies and shows that, in contrast to snakes and lizards, the fangs pre-date the venom. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Validation of use of subsets of teeth when applying the total mouth periodontal score (TMPS) system in dogs.

PubMed

Harvey, Colin E; Laster, Larry; Shofer, Frances S

2012-01-01

A total mouth periodontal score (TMPS) system in dogs has been described previously. Use of buccal and palatal/lingual surfaces of all teeth requires observation and recording of 120 gingivitis scores and 120 periodontitis scores. Although the result is a reliable, repeatable assessment of the extent of periodontal disease in the mouth, observing and recording 240 data points is time-consuming. Using data from a previously reported study of periodontal disease in dogs, correlation analysis was used to determine whether use of any of seven different subsets of teeth can generate TMPS subset gingivitis and periodontitis scores that are highly correlated with TMPS all-site, all-teeth scores. Overall, gingivitis scores were less highly correlated than periodontitis scores. The minimal tooth set with a significant intra-class correlation (> or = 0.9 of means of right and left sides) for both gingivitis scores and attachment loss measurements consisted of the buccal surface of the maxillary third incisor canine, third premolar fourth premolar; and first molar teeth; and, the mandibular canine, third premolar, fourth premolar and first molar teeth on one side (9 teeth, 15 root sites). Use of this subset of teeth, which reduces the number of data points per dog from 240 to 30 for gingivitis and periodontitis at each scoring episode, is recommended when calculating the gingivitis and periodontitis scores using the TMPS system.

Craniofacial form and function in Metriorhynchidae (Crocodylomorpha: Thalattosuchia): modelling phenotypic evolution with maximum-likelihood methods.

PubMed

Young, Mark T; Bell, Mark A; Brusatte, Stephen L

2011-12-23

Metriorhynchid crocodylomorphs were the only group of archosaurs to fully adapt to a pelagic lifestyle. During the Jurassic and Early Cretaceous, this group diversified into a variety of ecological and morphological types, from large super-predators with a broad short snout and serrated teeth to specialized piscivores/teuthophages with an elongate tubular snout and uncarinated teeth. Here, we use an integrated repertoire of geometric morphometric (form), biomechanical finite-element analysis (FEA; function) and phylogenetic data to examine the nature of craniofacial evolution in this clade. FEA stress values significantly correlate with morphometric values representing skull length and breadth, indicating that form and function are associated. Maximum-likelihood methods, which assess which of several models of evolution best explain the distribution of form and function data on a phylogenetic tree, show that the two major metriorhynchid subclades underwent different evolutionary modes. In geosaurines, both form and function are best explained as evolving under 'random' Brownian motion, whereas in metriorhynchines, the form metrics are best explained as evolving under stasis and the function metric as undergoing a directional change (towards most efficient low-stress piscivory). This suggests that the two subclades were under different selection pressures, and that metriorhynchines with similar skull shape were driven to become functionally divergent.

Bone structure regeneration after low induction magnetic field treatment in teeth chosen for extraction.

PubMed

Opalko, K; Dojs, A

2006-01-01

The aim of the work was to use and to evaluate the usefulness of the slow variable magnetic fields to aid the treatment of the teeth chosen for extraction. The marginal paradontium of periapical bone of teeth was in a state of extensive destruction. The teeth were chosen for extraction. 13 patients were chosen. 10 of them had with endo-perio changes and 3 suffered from full tooth luxation and had the teeth replanted. Those people were to have an extraction procedure or were declared as impossible to treat in other dental offices. Patients underwent non-aggressive skaling, endodontic treatment and were exposed to slow variable magnetic fields generated by Viofor JPS, accordingly to methods and parameters suggested by Department of Propaedeutics in Dentistry of Pomeranian Medical University in Szczecin. The process of healing of changes was evaluated radiologically. RTG done after 2 weeks and after 2 months were evaluated in respect of bone regeneration. They show the bone structure concentration. A RTG evaluation after half a year, two and three years show a preservation of the bone structure concentration. The use of slow variable magnetic fields contributed to bone structure regeneration and to preserve teeth with recorded endo-perio syndrome. Endodontic treatment of replanted teeth, aided with magnetostimulation has stopped the osteolisis process.

Paleo-tribology: development of wear measurement techniques and a three-dimensional model revealing how grinding dentitions self-wear to enable functionality

NASA Astrophysics Data System (ADS)

Erickson, Gregory M.; Sidebottom, Mark A.; Curry, John F.; Kay, David Ian; Kuhn-Hendricks, Stephen; Norell, Mark A.; Sawyer, W. Gregory; Krick, Brandon A.

2016-06-01

In most mammals and a rare few reptilian lineages the evolution of precise dental occlusion led to the capacity to form functional chewing surfaces due to pressures generated while feeding. The complex dental architectures of such teeth and the biomechanics of their self-wearing nature are poorly understood. Our research team composed of paleontologists, evolutionary biologists, and engineers have developed a protocol to: (1) determine the histological make-up of grinding dentitions in extant and fossil taxa; (2) ascertain wear-relevant material properties of the tissues; (3) determine how those properties relate to inter-tissue-biomechanics leading the dental functionality using a three-dimensional Archard’s wear model developed specifically for dental applications; (4) analyze those data in phylogenetic contexts to infer evolutionary patterns as they relate to feeding. Finally we discuss industrial applications that are emerging from our paleontologically-inspired research.

Bio-Decontamination of Water and Surfaces by DC Discharges in Atmospheric Air

NASA Astrophysics Data System (ADS)

Machala, Zdenko; Tarabová, Barbora; Pelach, Michal; Šipoldová, Zuzana; Hensel, Karol; Janda, Mário; Šikurová, Libuša

Two types of DC-driven atmospheric air discharges, including a streamer corona and a transient spark with short high current pulses of limited energy, were employed for bio-decontamination of water and various surfaces (agar plates, plastic foils, human teeth) contaminated by bacteria or spores (Salmonella typhimurium, Bacillus cereus). Both discharges generate cold non-equilibrium plasma. The discharges combined with the electro-spraying of the treated water through the needle electrode lead to fast and efficient bio-decontamination. Experiments comparing direct and indirect plasma effects, oxidation stress measurements in the cell membranes, and chemical changes induced in the treated water enable assessment of the plasma agents being responsible for microbial inactivation. Radicals and reactive oxygen species seem to be dominant biocidal agents, although deeper understanding of the plasma-induced water chemistry and of the temporal evolution of the bio-inactivation processes is needed.

Developmental and evolutionary novelty in the serrated teeth of theropod dinosaurs.

PubMed

Brink, K S; Reisz, R R; LeBlanc, A R H; Chang, R S; Lee, Y C; Chiang, C C; Huang, T; Evans, D C

2015-07-28

Tooth morphology and development can provide valuable insights into the feeding behaviour and evolution of extinct organisms. The teeth of Theropoda, the only clade of predominantly predatory dinosaurs, are characterized by ziphodonty, the presence of serrations (denticles) on their cutting edges. Known today only in varanid lizards, ziphodonty is much more pervasive in the fossil record. Here we present the first model for the development of ziphodont teeth in theropods through histological, SEM, and SR-FTIR analyses, revealing that structures previously hypothesized to prevent tooth breakage instead first evolved to shape and maintain the characteristic denticles through the life of the tooth. We show that this novel complex of dental morphology and tissues characterizes Theropoda, with the exception of species with modified feeding behaviours, suggesting that these characters are important for facilitating the hypercarnivorous diet of most theropods. This adaptation may have played an important role in the initial radiation and subsequent success of theropods as terrestrial apex predators.

Stable Isotopes Reveal Rapid Enamel Elongation (Amelogenesis) Rates for the Early Cretaceous Iguanodontian Dinosaur Lanzhousaurus magnidens.

PubMed

Suarez, Celina A; You, Hai-Lu; Suarez, Marina B; Li, Da-Qing; Trieschmann, J B

2017-11-10

Lanzhousaurus magnidens, a large non-hadrosauriform iguanodontian dinosaur from the Lower Cretaceous Hekou Group of Gansu Province, China has the largest known herbivorous dinosaur teeth. Unlike its hadrosauriform relatives possessing tooth batteries of many small teeth, Lanzhousaurus utilized a small number (14) of very large teeth (~10 cm long) to create a large, continuous surface for mastication. Here we investigate the significance of Lanzhousaurus in the evolutionary history of iguanodontian-hadrosauriform transition by using a combination of stable isotope analysis and CT imagery. We infer that Lanzhousaurus had a rapid rate of tooth enamel elongation or amelogenesis at 0.24 mm/day with dental tissues common to other Iguanodontian dinosaurs. Among ornithopods, high rates of amelogenesis have been previously observed in hadrosaurids, where they have been associated with a sophisticated masticatory apparatus. These data suggest rapid amelogenesis evolved among non-hadrosauriform iguanodontians such as Lanzhousaurus, representing a crucial step that was exapted for the evolution of the hadrosaurian feeding mechanism.

Spontaneous emergence of overgrown molar teeth in a colony of Prairie voles (Microtus ochrogaster)

PubMed Central

Jheon, Andrew H; Prochazkova, Michaela; Sherman, Michael; Manoli, Devanand S; Shah, Nirao M; Carbone, Lawrence; Klein, Ophir

2015-01-01

Continuously growing incisors are common to all rodents, which include the Microtus genus of voles. However, unlike many rodents, voles also possess continuously growing molars. Here, we report spontaneous molar defects in a population of Prairie voles (Microtus ochrogaster). We identified bilateral protuberances on the ventral surface of the mandible in several voles in our colony. In some cases, the protuberances broke through the cortical bone. The mandibular molars became exposed and infected, and the maxillary molars entered the cranial vault. Visualisation upon soft tissue removal and microcomputed tomography (microCT) analyses confirmed that the protuberances were caused by the overgrowth of the apical ends of the molar teeth. We speculate that the unrestricted growth of the molars was due to the misregulation of the molar dental stem cell niche. Further study of this molar phenotype may yield additional insight into stem cell regulation and the evolution and development of continuously growing teeth. PMID:25634121

Developmental and evolutionary novelty in the serrated teeth of theropod dinosaurs

PubMed Central

Brink, K. S.; Reisz, R. R.; LeBlanc, A. R. H.; Chang, R. S.; Lee, Y. C.; Chiang, C. C.; Huang, T.; Evans, D. C.

2015-01-01

Tooth morphology and development can provide valuable insights into the feeding behaviour and evolution of extinct organisms. The teeth of Theropoda, the only clade of predominantly predatory dinosaurs, are characterized by ziphodonty, the presence of serrations (denticles) on their cutting edges. Known today only in varanid lizards, ziphodonty is much more pervasive in the fossil record. Here we present the first model for the development of ziphodont teeth in theropods through histological, SEM, and SR-FTIR analyses, revealing that structures previously hypothesized to prevent tooth breakage instead first evolved to shape and maintain the characteristic denticles through the life of the tooth. We show that this novel complex of dental morphology and tissues characterizes Theropoda, with the exception of species with modified feeding behaviours, suggesting that these characters are important for facilitating the hypercarnivorous diet of most theropods. This adaptation may have played an important role in the initial radiation and subsequent success of theropods as terrestrial apex predators. PMID:26216577

Characterization of Coronal Pulp Cells and Radicular Pulp Cells in Human Teeth.

PubMed

Honda, Masaki; Sato, Momoko; Toriumi, Taku

2017-09-01

Dental pulp has garnered much attention as an easily accessible postnatal tissue source of high-quality mesenchymal stem cells (MSCs). Since the discovery of dental pulp stem cells (DPSCs) in permanent third molars, stem cells from human exfoliated deciduous teeth and from supernumerary teeth (mesiodentes) have been identified as a population distinct from DPSCs. Dental pulp is divided into 2 parts based on the developing stage: the coronal pulp and the radicular pulp. Root formation begins after the crown part is completed. We performed a sequential study to examine the differences between the characteristics of coronal pulp cells (CPCs) and radicular pulp cells (RPCs) from permanent teeth, mesiodentes, and deciduous teeth. Interestingly, although we have not obtained any data on the difference between CPCs and RPCs in permanent teeth, there are some differences between the characteristics of CPCs and RPCs from mesiodentes and deciduous teeth. The MSC characteristics differed between the RPCs and CPCs, and the reprogramming efficiency for the generation of induced pluripotent stem cells was greater in RPCs than in CPCs from deciduous teeth. The proportion of CD105 + cells in CPCs versus that in RPCs varied in mesiodentes but not in permanent teeth. The results indicate that the proportion of CD105 + cells is an effective means of characterizing dental pulp cells in mesiodentes. Taken together, the stem cells in deciduous and supernumerary teeth share many characteristics, such as a high proliferation rate and an immunophenotype similar to that of DPSCs. Thus, mesiodentes accidentally encountered on radiographs by the general dental practitioner might be useful for stem cell therapy. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Experimental and numerical investigation of the sound generation mechanisms of sibilant fricatives using a simplified vocal tract model

NASA Astrophysics Data System (ADS)

Yoshinaga, Tsukasa; Nozaki, Kazunori; Wada, Shigeo

2018-03-01

The sound generation mechanisms of sibilant fricatives were investigated with experimental measurements and large-eddy simulations using a simplified vocal tract model. The vocal tract geometry was simplified to a three-dimensional rectangular channel, and differences in the geometries while pronouncing fricatives /s/ and /∫/ were expressed by shifting the position of the tongue and its constricted flow channel. Experimental results showed that the characteristic peak frequency of the fricatives decreased when the distance between the tongue and teeth increased. Numerical simulations revealed that the jet flow generated from the constriction impinged on the upper teeth wall and caused the main sound source upstream and downstream from the gap between the teeth. While magnitudes of the sound source decreased with increments of the frequency, amplitudes of the pressure downstream from the constriction increased at the peak frequencies of the corresponding tongue position. These results indicate that the sound pressures at the peak frequencies increased by acoustic resonance in the channel downstream from the constriction, and the different frequency characteristics between /s/ and /∫/ were produced by changing the constriction and the acoustic node positions inside the vocal tract.

Vienna-Chicago: the cultural transformation of the model system of the un-opposed molar.

PubMed

Luan, Xianghong; Diekwisch, Thomas G H

2007-08-01

The discussion over the roles of genes and environment on the phenotypical specification of organisms has held a central role in science philosophy since the late 19(th) century and has re-emerged in today's debate over genetic determinism and developmental plasticity. In fin-de-siecle Vienna, this debate coincided with a philosophical debate over empiricism/materialism versus idealism/vitalism. Turn-of-the-century Vienna's highly interdisciplinary environment was also the birthplace for the model system of the un-opposed molar. The un-opposed molar system features new tissue formation at the roots of teeth and tooth drift once opposing teeth are lost. The un-opposed molar model system was revived by a group of Viennese scientists who left Vienna during the Nazi period to address Vienna's questions about evolution and heredity and about genes and environment in Chicago's post-WWII scientific exile community. Here we are using the colorful history of the un-opposed molar to investigate the role of culture and method in the scientific evolution of a model system. (c) 2007 Wiley Periodicals, Inc.

The dizzying material evolution of the toothbrush

NASA Astrophysics Data System (ADS)

Salveson, Paul

The toothbrush has evolved a highly specialized material aura over the last 150 years in the petri dish of capitalism. It has been bred to appear cutting edge to the culturally trained eye, much like the bird of paradise has developed beautiful ornate plumage to attract a mate. As the toothbrush's formal evolution becomes more detailed and specific, the transparency of its purpose becomes increasingly convoluted and easily detached from its material reality. An alien object is slowly emerging from a complex set of cultural conditions. It lives in our houses and cleans our teeth.

Enamel ultrastructure in fossil cetaceans (Cetacea: Archaeoceti and Odontoceti).

PubMed

Loch, Carolina; Kieser, Jules A; Fordyce, R Ewan

2015-01-01

The transition from terrestrial ancestry to a fully pelagic life profoundly altered the body systems of cetaceans, with extreme morphological changes in the skull and feeding apparatus. The Oligocene Epoch was a crucial time in the evolution of cetaceans when the ancestors of modern whales and dolphins (Neoceti) underwent major diversification, but details of dental structure and evolution are poorly known for the archaeocete-neocete transition. We report the morphology of teeth and ultrastructure of enamel in archaeocetes, and fossil platanistoids and delphinoids, ranging from late Oligocene (Waitaki Valley, New Zealand) to Pliocene (Caldera, Chile). Teeth were embedded in epoxy resin, sectioned in cross and longitudinal planes, polished, etched, and coated with gold palladium for scanning electron microscopy (SEM) observation. SEM images showed that in archaeocetes, squalodontids and Prosqualodon (taxa with heterodont and nonpolydont/limited polydont teeth), the inner enamel was organized in Hunter-Schreger bands (HSB) with an outer layer of radial enamel. This is a common pattern in most large-bodied mammals and it is regarded as a biomechanical adaptation related to food processing and crack resistance. Fossil Otekaikea sp. and delphinoids, which were polydont and homodont, showed a simpler structure, with inner radial and outer prismless enamel. Radial enamel is regarded as more wear-resistant and has been retained in several mammalian taxa in which opposing tooth surfaces slide over each other. These observations suggest that the transition from a heterodont and nonpolydont/limited polydont dentition in archaeocetes and early odontocetes, to homodont and polydont teeth in crownward odontocetes, was also linked to a marked simplification in the enamel Schmelzmuster. These patterns probably reflect functional shifts in food processing from shear-and-mastication in archaeocetes and early odontocetes, to pierce-and-grasp occlusion in crownward odontocetes, with the implication of less demanding feeding biomechanics as seen in most extant odontocetes.

Enamel Ultrastructure in Fossil Cetaceans (Cetacea: Archaeoceti and Odontoceti)

PubMed Central

Loch, Carolina; Fordyce, R. Ewan

2015-01-01

The transition from terrestrial ancestry to a fully pelagic life profoundly altered the body systems of cetaceans, with extreme morphological changes in the skull and feeding apparatus. The Oligocene Epoch was a crucial time in the evolution of cetaceans when the ancestors of modern whales and dolphins (Neoceti) underwent major diversification, but details of dental structure and evolution are poorly known for the archaeocete-neocete transition. We report the morphology of teeth and ultrastructure of enamel in archaeocetes, and fossil platanistoids and delphinoids, ranging from late Oligocene (Waitaki Valley, New Zealand) to Pliocene (Caldera, Chile). Teeth were embedded in epoxy resin, sectioned in cross and longitudinal planes, polished, etched, and coated with gold palladium for scanning electron microscopy (SEM) observation. SEM images showed that in archaeocetes, squalodontids and Prosqualodon (taxa with heterodont and nonpolydont/limited polydont teeth), the inner enamel was organized in Hunter-Schreger bands (HSB) with an outer layer of radial enamel. This is a common pattern in most large-bodied mammals and it is regarded as a biomechanical adaptation related to food processing and crack resistance. Fossil Otekaikea sp. and delphinoids, which were polydont and homodont, showed a simpler structure, with inner radial and outer prismless enamel. Radial enamel is regarded as more wear-resistant and has been retained in several mammalian taxa in which opposing tooth surfaces slide over each other. These observations suggest that the transition from a heterodont and nonpolydont/limited polydont dentition in archaeocetes and early odontocetes, to homodont and polydont teeth in crownward odontocetes, was also linked to a marked simplification in the enamel Schmelzmuster. These patterns probably reflect functional shifts in food processing from shear-and-mastication in archaeocetes and early odontocetes, to pierce-and-grasp occlusion in crownward odontocetes, with the implication of less demanding feeding biomechanics as seen in most extant odontocetes. PMID:25629995

Understanding the Calcium Isotope and Trace Metal Composition of Elasmobranch Teeth: Implications for Recreating the δ44/40Ca of Seawater

NASA Astrophysics Data System (ADS)

Akhtar, A.; Higgins, J. A.

2017-12-01

Non-traditional stable isotopes in marine fossils have the potential to act as archives of paleo-seawater chemistry, biological evolution, and ancient ecosystems. In particular, bioapatite in elasmobranch enamel has been shown to be a robust proxy for environmental, geochemical and ecological reconstructions through Earth history due to its temporal range (from Devonian to present day) and resistance to diagenetic alteration. Moreover, frequent replacement rates of teeth in individuals, and high species level diversity and global distribution ensure a sample suite that encompasses a wide range of geographies and ecosystems. Here we present δ44/40Ca, δ87/86Sr and trace element (e.g. Sr/Ca, Mg/Ca) data from a suite of 300 teeth spanning the Cretaceous to present day and representing primary, secondary and tertiary piscivores. Modern teeth analyzed as part of this study have an average δ44/40Ca value of -2.07±0.48‰ (2s, n = 80) and Sr/Ca ratio of 2.30±0.24 mmol/mol (2s, n = 40), both offset from present day seawater (0 permil and 8.6 mmol/mol, respectively) due to a combination of inorganic (e.g. mineral precipitation) and biological (e.g. ionic regulation) effects. The total range in δ44/40Ca values in modern teeth is 1.19‰, the same order as that expected for variations in the δ44/40Ca value of ancient seawater. Using results from synthetic apatite synthesis experiments, mathematical modeling, and measurements of shark soft-tissue (e.g. blood and flesh), we explore sources of Ca isotope variability in shark teeth and evaluate their potential as archives of ancient seawater chemistry.

Blocking VEGF signaling delays development of replacement teeth in zebrafish.

PubMed

Crucke, J; Huysseune, A

2015-01-01

The dentition in zebrafish is extremely and richly vascularized, but the function of the vasculature, in view of the continuous replacement of the teeth, remains elusive. Through application of SU5416, a vascular endothelial growth factor receptor inhibitor, we studied the role of the blood vessels in the dentition of the zebrafish. We were unable to show an effect on the development of first-generation teeth as well as first tooth replacement. However, in juvenile fish, a delay was observed in the developmental state of the replacement tooth compared with what was expected based on the maturation state of the functional tooth. Furthermore, we observed a difference between treated and nontreated fish in the distance between blood vessels and developing replacement teeth. In conclusion, our results provide support for a nutritive, rather than an inductive, function of the vasculature in the process of tooth development and replacement. © International & American Associations for Dental Research 2014.

Perceptual distortion of face deletion by local anaesthesia of the human lips and teeth.

PubMed

Türker, Kemal S; Yeo, Purdee L M; Gandevia, Simon C

2005-08-01

As visual guidance of facial movements is impossible, accurate movements for speech and mastication require an established body image that is formed via the information from mechanoreceptors in the skin, mucosa, periodontium, and proprioceptors in the facial and masticatory muscles and in the jaw joints. In this study we aimed to investigate how the acute deafferentation of lips and teeth alters the established image of lips, teeth and the thumb. We used a psychophysical method to determine whether the perceived sizes of the upper lip and front teeth change when the sensory input from the lips and front teeth is fully blocked. We also examined the perceived size of the thumb to test for acute interactions between the thumb and facial structures. Local anaesthetic blocking of upper lip and upper front teeth significantly increased the perceived size of the upper lip by as much as 100% (range 21-100%) in ten out of eleven subjects tested (overall mean 52%; p=0.001). The perceived size of the upper teeth also significantly increased by as much as 155% (range 30-155%) in eight of the eleven subjects during anaesthesia (overall mean 41%; p=0.035). When the region of anaesthesia was increased and both upper and lower teeth and lips were anaesthetised, the perceived size of the upper lip again increased, by 53% (p=0.040), but the change in perceived size of the upper front teeth (18%) was not significant (p=0.206). In both studies there was no change in perceived size of the thumb. The results illustrate the labile central interaction between sensory inputs and the importance of feedback from peripheral afferents in generating the subjective facial image. The timing, level, and area of anaesthesia may be important modifiers of these interactions.

A Unique Bonding Technique for Immediate Orthognathic Surgery

PubMed Central

Ayinipully, Hariprasad; Paul, Rosaline Tina; Ponnambathayil, Shaji Aboobacker; Rasheed, Althaf Thanimoottil

2015-01-01

Introduction A challenge in orthodontics is achieving ideal bracket position which determines treatment results and finishing. A new bonding method is done indirectly on the cast and bonded directly on the teeth, but it does not require conventional trays to carry the brackets to the teeth. Materials and Methods Heavy sized archwires like 0.019″x0.025″ or 0.018″ SS are bent to the malocclusion to generate a template which comprises of an Bracket -Archwire Assembly (BAA). This assembly is transferred onto the teeth using the molar bands with tubes which serves as a jig for proper orientation of the BAA, then the adhesive is cured at one shot to complete the bonding procedure. Results Two surgical cases successfully bonded with this technique is presented in this article. Conclusion This bonding method finds specific advantages in surgical orthodontics – when the surgeon decides on a surgery-first treatment objective, management of single or a couple of periodontally extruded teeth, management of impacted teeth and in patients needing fixed functional appliance immediately before the completion of growth spurt. PMID:26266212

Comparison between implant-supported prostheses and teeth regarding passive threshold level.

PubMed

Jacobs, R; van Steenberghe, D

1993-01-01

A passive threshold determination was carried out on 31 patients subdivided into four test groups according to different prosthesis types supported by osseointegrated implants. They were compared to a control group of 10 patients with nonrestored natural test teeth. Forces were generated by a solenoid-driven stimulating device, which was placed in contact with the implant or tooth prior to the actual force rise to avoid impact forces. The findings indicate that the threshold level of implants is 50 times higher than that of natural teeth when tapping is avoided, which might otherwise trigger distant receptors. Bone deformation triggering the periosteal mechanoreceptors is the most logical explanation for the sensation reported.

Ovipositor morphology correlates with life history evolution in agaonid fig wasps

NASA Astrophysics Data System (ADS)

Elias, Larissa Galante; Kjellberg, Finn; Farache, Fernando Henrique Antoniolli; Almeida, Eduardo A. B.; Rasplus, Jean-Yves; Cruaud, Astrid; Peng, Yan-Qiong; Yang, Da-Rong; Pereira, Rodrigo Augusto Santinelo

2018-07-01

The high adaptive success of parasitic Hymenoptera might be related to the use of different oviposition sites, allowing niche partitioning among co-occurring species resulting in life history specialization and diversification. In this scenario, evolutionary changes in life history and resources for oviposition can be associated with changes in ovipositor structure, allowing exploitation of different substrates for oviposition. We used a formal phylogenetic framework to investigate the evolution of ovipositor morphology and life history in agaonid wasps. We sampled 24 species with different life histories belonging to all main clades of Agaonidae including representatives of all described genera of non-pollinating fig wasps (NPFW). Our results show an overall correlation between ovipositor morphology and life history in agaonid fig wasps. Ovipositor morphologies seem to be related to constraints imposed by features of the oviposition sites since ovipositor morphology has experienced convergent evolution at least four times in Sycophaginae (Agaonidae) according to the resource used. Non-galling species have more distantly spaced teeth with uneven spacing, as opposed to the observed morphology of galling species. Our results suggest that the ancestral condition for ovipositor morphology was most likely the presence of one or two apical teeth. Regarding life history, ovary galling species that oviposit in receptive figs possibly represent the ancestral condition. Different ovipositor characteristics allow exploitation of new niches and may be related to resource partitioning and species co-existence in the fig-fig wasp system.

Co-option of the hormone-signalling module dafachronic acid-DAF-12 in nematode evolution.

PubMed

Bento, Gilberto; Ogawa, Akira; Sommer, Ralf J

2010-07-22

Morphological novelties are lineage-specific traits that serve new functions. Developmental polyphenisms have been proposed to be facilitators of phenotypic evolution, but little is known about the interplay between the associated genetic and environmental factors. Here, we study two alternative morphologies in the mouth of the nematode Pristionchus pacificus and the formation of teeth-like structures that are associated with bacteriovorous feeding and predatory behaviour on fungi and other worms. These teeth-like denticles represent an evolutionary novelty, which is restricted to some members of the nematode family Diplogastridae but is absent from Caenorhabditis elegans and related nematodes. We show that the mouth dimorphism is a polyphenism that is controlled by starvation and the co-option of an endocrine switch mechanism. Mutations in the nuclear hormone receptor DAF-12 and application of its ligand, the sterol hormone dafachronic acid, strongly influence this switch mechanism. The dafachronic acid-DAF-12 module has been shown to control the formation of arrested dauer larvae in both C. elegans and P. pacificus, as well as related life-history decisions in distantly related nematodes. The comparison of dauer formation and mouth morphology switch reveals that different thresholds of dafachronic acid signalling provide specificity. This study shows how hormonal signalling acts by coupling environmental change and genetic regulation and identifies dafachronic acid as a key hormone in nematode evolution.

The development of complex tooth shape in reptiles

PubMed Central

Zahradnicek, Oldrich; Buchtova, Marcela; Dosedelova, Hana; Tucker, Abigail S.

2014-01-01

Reptiles have a diverse array of tooth shapes, from simple unicuspid to complex multicuspid teeth, reflecting functional adaptation to a variety of diets and eating styles. In addition to cusps, often complex longitudinal labial and lingual enamel crests are widespread and contribute to the final shape of reptile teeth. The simplest shaped unicuspid teeth have been found in piscivorous or carnivorous ancestors of recent diapsid reptiles and they are also present in some extant carnivores such as crocodiles and snakes. However, the ancestral tooth shape for squamate reptiles is thought to be bicuspid, indicating an insectivorous diet. The development of bicuspid teeth in lizards has recently been published, indicating that the mechanisms used to create cusps and crests are very distinct from those that shape cusps in mammals. Here, we introduce the large variety of tooth shapes found in lizards and compare the morphology and development of bicuspid, tricuspid, and pentacuspid teeth, with the aim of understanding how such tooth shapes are generated. Next, we discuss whether the processes used to form such morphologies are conserved between divergent lizards and whether the underlying mechanisms share similarities with those of mammals. In particular, we will focus on the complex teeth of the chameleon, gecko, varanus, and anole lizards using SEM and histology to compare the tooth crown morphology and embryonic development. PMID:24611053

Tooth replacement and putative odontogenic stem cell niches in pharyngeal dentition of medaka (Oryzias latipes).

PubMed

Abduweli, Dawud; Baba, Otto; Tabata, Makoto J; Higuchi, Kazunori; Mitani, Hiroshi; Takano, Yoshiro

2014-04-01

The small-sized teleost fish medaka, Oryzias latipes, has as many as 1000 pharyngeal teeth undergoing continuous replacement. In this study, we sought to identify the tooth-forming units and determine its replacement cycles, and further localize odontogenic stem cell niches in the pharyngeal dentition of medaka to gain insights into the mechanisms whereby continuous tooth replacement is maintained. Three-dimensional reconstruction of pharyngeal epithelium and sequential fluorochrome labeling of pharyngeal bones and teeth indicated that the individual functional teeth and their successional teeth were organized in families, each comprising up to five generations of teeth and successional tooth germs, and that the replacement cycle of functional teeth was approximately 4 weeks. BrdU label/chase experiments confirmed the existence of clusters of label-retaining epithelial cells at the posterior end of each tooth family where the expression of pluripotency marker Sox2 was confirmed by in situ hybridization. Label-retaining cells were also identified in the mesoderm immediately adjacent to the posterior end of each tooth family. These data suggest the importance of existence of slow-cycling dental epithelial cells and Sox2 expressions at the posterior end of each tooth family to maintain continuous tooth formation and replacement in the pharyngeal dentition of medaka.

Human Life History Evolution Explains Dissociation between the Timing of Tooth Eruption and Peak Rates of Root Growth

PubMed Central

Dean, M. Christopher; Cole, Tim J.

2013-01-01

We explored the relationship between growth in tooth root length and the modern human extended period of childhood. Tooth roots provide support to counter chewing forces and so it is advantageous to grow roots quickly to allow teeth to erupt into function as early as possible. Growth in tooth root length occurs with a characteristic spurt or peak in rate sometime between tooth crown completion and root apex closure. Here we show that in Pan troglodytes the peak in root growth rate coincides with the period of time teeth are erupting into function. However, the timing of peak root velocity in modern humans occurs earlier than expected and coincides better with estimates for tooth eruption times in Homo erectus. With more time to grow longer roots prior to eruption and smaller teeth that now require less support at the time they come into function, the root growth spurt no longer confers any advantage in modern humans. We suggest that a prolonged life history schedule eventually neutralised this adaptation some time after the appearance of Homo erectus. The root spurt persists in modern humans as an intrinsic marker event that shows selection operated, not primarily on tooth tissue growth, but on the process of tooth eruption. This demonstrates the overarching influence of life history evolution on several aspects of dental development. These new insights into tooth root growth now provide an additional line of enquiry that may contribute to future studies of more recent life history and dietary adaptations within the genus Homo. PMID:23342167

Numerical fatigue 3D-FE modeling of indirect composite-restored posterior teeth.

PubMed

Ausiello, Pietro; Franciosa, Pasquale; Martorelli, Massimo; Watts, David C

2011-05-01

In restored teeth, stresses at the tooth-restoration interface during masticatory processes may fracture the teeth or the restoration and cracks may grow and propagate. The aim was to apply numerical methodologies to simulate the behavior of a restored tooth and to evaluate fatigue lifetimes before crack failure. Using a CAD-FEM procedure and fatigue mechanic laws, the fatigue damage of a restored molar was numerically estimated. Tessellated surfaces of enamel and dentin were extracted by applying segmentation and classification algorithms, to sets of 2D image data. A user-friendly GUI, which enables selection and visualization of 3D tessellated surfaces, was developed in a MatLab(®) environment. The tooth-boundary surfaces of enamel and dentin were then created by sweeping operations through cross-sections. A class II MOD cavity preparation was then added into the 3D model and tetrahedral mesh elements were generated. Fatigue simulation was performed by combining a preliminary static FEA simulation with classical fatigue mechanical laws. Regions with the shortest fatigue-life were located around the fillets of the class II MOD cavity, where the static stress was highest. The described method can be successfully adopted to generate detailed 3D-FE models of molar teeth, with different cavities and restorative materials. This method could be quickly implemented for other dental or biomechanical applications. Copyright © 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Peculiar macrophagous adaptations in a new Cretaceous pliosaurid

PubMed Central

Arkhangelsky, Maxim S.; Stenshin, Ilya M.; Uspensky, Gleb N.; Zverkov, Nikolay G.

2015-01-01

During the Middle and Late Jurassic, pliosaurid plesiosaurs evolved gigantic body size and a series of craniodental adaptations that have been linked to the occupation of an apex predator niche. Cretaceous pliosaurids (i.e. Brachaucheninae) depart from this morphology, being slightly smaller and lacking the macrophagous adaptations seen in earlier forms. However, the fossil record of Early Cretaceous pliosaurids is poor, concealing the evolution and ecological diversity of the group. Here, we report a new pliosaurid from the Late Hauterivian (Early Cretaceous) of Russia. Phylogenetic analyses using reduced consensus methods recover it as the basalmost brachauchenine. This pliosaurid is smaller than other derived pliosaurids, has tooth alveoli clustered in pairs and possesses trihedral teeth with complex serrated carinae. Maximum-likelihood ancestral state reconstruction suggests early brachauchenines retained trihedral teeth from their ancestors, but modified this feature in a unique way, convergent with macrophagous archosaurs or sphenacodontoids. Our findings indicate that Early Cretaceous marine reptile teeth with serrated carinae cannot be unequivocally assigned to metriorhynchoid crocodylomorphs. Furthermore, they extend the known diversity of dental adaptations seen in Sauropterygia, the longest lived clade of marine tetrapods. PMID:27019740

Shear Bond Strength of Self-etching Adhesives to Cavities Prepared by Diamond Bur or Er,Cr:YSGG Laser and Effect of Prior Acid Etching.

PubMed

Jhingan, Pulkit; Sachdev, Vinod; Sandhu, Meera; Sharma, Karan

2015-12-01

To compare and evaluate shear bond strength of self-etching adhesives bonded to cavities prepared by diamond bur or Er,Cr:YSGG laser and the effect of prior acid etching on shear bond strength. Ninety-six caries-free human premolars were selected and divided into 2 groups depending on mode of cavity preparation (48 teeth each). Cavities were prepared with Er,Cr:YSGG laser in group 1 and diamond burs in an air-turbine handpiece in group 2. Groups 1 and 2 were further subdivided into three subgroups of 8 teeth each, which were bonded with sixth- or seventh-generation adhesives with or without prior acid etching, followed by restoration of all samples with APX Flow. These samples were subjected to shear bond strength testing. In addition, the surface morphology of 24 samples each from groups 1 and 2 was evaluated using SEM. Data were analyzed using the Shapiro-Wilk test, one- and two-way ANOVA, the t-test, and the least significant difference test, which showed that the data were normally distributed (p > 0.05). The shear bond strength of adhesives in cavities prepared by Er,Cr:YSGG laser was significantly higher than in diamond bur-prepared cavities (p < 0.05). SEM analysis showed a smear-layer-free anfractuous surface on laser-ablated teeth, in contrast to conventional bur-prepared teeth. The Er,Cr:YSGG laser-ablated surface proved to be more receptive for adhesion than those prepared by diamond bur irrespective of the bonding agent used. Seventh-generation adhesives yielded higher shear bond strength than did sixth-generation adhesives. Prior acid etching decreased the shear bond strength of self-etching adhesives.

Root End Generation: An Unsung Characteristic Property of MTA-A Case Report

PubMed Central

Dixit, Seema; Dixit, Ashutosh; Kumar, Pravin; Arora, Saurabh

2014-01-01

Management of immature teeth with necrotic pulp and periapical lesion has long presented a challenge. The treatment of choice for such teeth is apexification, which is induction of apical closure to produce more favorable conditions for conventional canal obturation. Traditionally, calcium hydroxide has been used for the apexification of immature permanent teeth, however, Mineral Trioxide Aggregate (MTA) holds significant promise not only as an alternative to multiple treatment visits with calcium hydroxide but also having the potential to induce root end development, eventually forming a completed root apex. This case report presents a successful healing and apexification with the use of calcium hydroxide and MTA. A 5-year follow-up revealed root development with MTA. PMID:24596800

Stress distribution in delayed replanted teeth splinted with different orthodontic wires: a three-dimensional finite element analysis.

PubMed

de Souza, Fernando Isquierdo; Poi, Wilson Roberto; da Silva, Vanessa Ferreira; Martini, Ana Paula; Melo, Regis Alexandre da Cunha; Panzarini, Sonia Regina; Rocha, Eduardo Passos

2015-06-01

The aim was to evaluate the biomechanical behavior of the supporting bony structures of replanted teeth and the periodontal ligament (PDL) of adjacent teeth when orthodontic wires with different mechanical properties are applied, with three-dimensional finite element analysis. Based on tomographic and microtomographic data, a three-dimensional model of the anterior maxilla with the corresponding teeth (tooth 13-tooth 23) was generated to simulate avulsion and replantation of the tooth 21. The teeth were splinted with orthodontic wire (Ø 0.8 mm) and composite resin. The elastic modulus of the three orthodontic wires used, that is, steel wire (FA), titanium-molybdenum wire (FTM), and nitinol wire (FN) were 200 GPa, 84 GPa, and 52 GPa, respectively. An oblique load (100 N) was applied at an angle of 45° on the incisal edge of the replanted tooth and was analyzed using Ansys Workbench software. The maximum (σmax) and minimum (σmin) principal stresses generated in the PDL, cortical and alveolar bones, and the modified von Mises (σvM) values for the orthodontic wires were obtained. With regard to the cortical bone and PDL, the highest σmin and σmax values for FTM, FN, and FA were checked. With regard to the alveolar bone, σmax and σmin values were highest for FA, followed by FTM and FN. The σvM values of the orthodontic wires followed the order of rigidity of the alloys, that is, FA > FTM > FN. The biomechanical behavior of the analyzed structures with regard to all the three patterns of flexibility was similar. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Osteoblast and osteoclast behaviors in the turnover of attachment bones during medaka tooth replacement.

PubMed

Mantoku, Akiko; Chatani, Masahiro; Aono, Kazushi; Inohaya, Keiji; Kudo, Akira

2016-01-15

Tooth replacement in polyphyodont is a well-organized system for maintenance of homeostasis of teeth, containing the dynamic structural change in skeletal tissues such as the attachment bone, which is the supporting element of teeth. Histological analyses have revealed the character of tooth replacement, however, the cellular mechanism of how skeletal tissues are modified during tooth replacement is largely unknown. Here, we showed the important role of osteoblasts for controlling osteoclasts to modify the attachment bone during tooth replacement in medaka pharyngeal teeth, coupled with an osterix-DsRed/TRAP-GFP transgenic line to visualize osteoblasts and osteoclasts. In the turnover of the row of attachment bones, these bones were resorbed at the posterior side where most developed functional teeth were located, and generated at the anterior side where teeth were newly erupted, which caused continuous tooth replacement. In the cellular analysis, osteoclasts and osteoblasts were located at attachment bones separately, since mature osteoclasts were localized at the resorbing side and osteoblasts gathered at the generating side. To demonstrate the role of osteoclasts in tooth replacement, we established medaka made deficient in c-fms-a by TALEN. c-fms-a deficient medaka showed hyperplasia of attachment bones along with reduced bone resorption accompanied by a low number of TRAP-positive osteoclasts, indicating an important role of osteoclasts in the turnover of attachment bones. Furthermore, nitroreductase-mediated osteoblast-specific ablation induced disappearance of osteoclasts, indicating that osteoblasts were essential for maintenance of osteoclasts for the proper turnover. Taken together, our results suggested that the medaka attachment bone provides the model to understand the cellular mechanism for tooth replacement, and that osteoblasts act in the coordination of bone morphology by supporting osteoclasts. Copyright © 2015 Elsevier Inc. All rights reserved.

Detecting taxonomic and phylogenetic signals in equid cheek teeth: towards new palaeontological and archaeological proxies

NASA Astrophysics Data System (ADS)

Cucchi, T.; Mohaseb, A.; Peigné, S.; Debue, K.; Orlando, L.; Mashkour, M.

2017-04-01

The Plio-Pleistocene evolution of Equus and the subsequent domestication of horses and donkeys remains poorly understood, due to the lack of phenotypic markers capable of tracing this evolutionary process in the palaeontological/archaeological record. Using images from 345 specimens, encompassing 15 extant taxa of equids, we quantified the occlusal enamel folding pattern in four mandibular cheek teeth with a single geometric morphometric protocol. We initially investigated the protocol accuracy by assigning each tooth to its correct anatomical position and taxonomic group. We then contrasted the phylogenetic signal present in each tooth shape with an exome-wide phylogeny from 10 extant equine species. We estimated the strength of the phylogenetic signal using a Brownian motion model of evolution with multivariate K statistic, and mapped the dental shape along the molecular phylogeny using an approach based on squared-change parsimony. We found clear evidence for the relevance of dental phenotypes to accurately discriminate all modern members of the genus Equus and capture their phylogenetic relationships. These results are valuable for both palaeontologists and zooarchaeologists exploring the spatial and temporal dynamics of the evolutionary history of the horse family, up to the latest domestication trajectories of horses and donkeys.

Detecting taxonomic and phylogenetic signals in equid cheek teeth: towards new palaeontological and archaeological proxies

PubMed Central

Mohaseb, A.; Peigné, S.; Debue, K.; Orlando, L.; Mashkour, M.

2017-01-01

The Plio–Pleistocene evolution of Equus and the subsequent domestication of horses and donkeys remains poorly understood, due to the lack of phenotypic markers capable of tracing this evolutionary process in the palaeontological/archaeological record. Using images from 345 specimens, encompassing 15 extant taxa of equids, we quantified the occlusal enamel folding pattern in four mandibular cheek teeth with a single geometric morphometric protocol. We initially investigated the protocol accuracy by assigning each tooth to its correct anatomical position and taxonomic group. We then contrasted the phylogenetic signal present in each tooth shape with an exome-wide phylogeny from 10 extant equine species. We estimated the strength of the phylogenetic signal using a Brownian motion model of evolution with multivariate K statistic, and mapped the dental shape along the molecular phylogeny using an approach based on squared-change parsimony. We found clear evidence for the relevance of dental phenotypes to accurately discriminate all modern members of the genus Equus and capture their phylogenetic relationships. These results are valuable for both palaeontologists and zooarchaeologists exploring the spatial and temporal dynamics of the evolutionary history of the horse family, up to the latest domestication trajectories of horses and donkeys. PMID:28484618

Barium distributions in teeth reveal early-life dietary transitions in primates.

PubMed

Austin, Christine; Smith, Tanya M; Bradman, Asa; Hinde, Katie; Joannes-Boyau, Renaud; Bishop, David; Hare, Dominic J; Doble, Philip; Eskenazi, Brenda; Arora, Manish

2013-06-13

Early-life dietary transitions reflect fundamental aspects of primate evolution and are important determinants of health in contemporary human populations. Weaning is critical to developmental and reproductive rates; early weaning can have detrimental health effects but enables shorter inter-birth intervals, which influences population growth. Uncovering early-life dietary history in fossils is hampered by the absence of prospectively validated biomarkers that are not modified during fossilization. Here we show that large dietary shifts in early life manifest as compositional variations in dental tissues. Teeth from human children and captive macaques, with prospectively recorded diet histories, demonstrate that barium (Ba) distributions accurately reflect dietary transitions from the introduction of mother's milk through the weaning process. We also document dietary transitions in a Middle Palaeolithic juvenile Neanderthal, which shows a pattern of exclusive breastfeeding for seven months, followed by seven months of supplementation. After this point, Ba levels in enamel returned to baseline prenatal levels, indicating an abrupt cessation of breastfeeding at 1.2 years of age. Integration of Ba spatial distributions and histological mapping of tooth formation enables novel studies of the evolution of human life history, dietary ontogeny in wild primates, and human health investigations through accurate reconstructions of breastfeeding history.

Teeth as biomonitors of selenium concentrations in tissues of beluga whales (Delphinapterus leucas).

PubMed

Kinghorn, April; Humphries, Murray M; Outridge, Peter; Chan, Hing Man

2008-08-25

Selenium (Se) is an essential element which has been shown to play an important role in protecting marine mammals against the toxic effects of mercury (Hg) and other metals. It has been suggested that metal concentration in marine mammal teeth can potentially be used as bioindicators for body burden. The objective of this study was to investigate the relationship between Se concentrations in beluga (Delphinapterus leucas) teeth and those previously measured in soft tissues (liver, kidney, muscle and muktuk). Tooth Hg concentrations are also measured, and the relationships between Se and Hg in teeth and soft tissues are examined. Se in the teeth of beluga was measured using hydride generation atomic fluorescence spectrometry (HG-AFS) and Hg in beluga teeth was measured by cold-vapour atomic absorption. Tooth Se concentrations ranged from 108 ng/g to 245 ng/g dry weight, and tooth Hg concentrations ranged from 10 to 189 ng/g dry weight. In the soft tissues, Se concentrations were highest in the liver, followed by kidney, muktuk, and muscle. There were significant correlations between tooth Se concentrations and animal age, tooth Se and liver and muscle Se, and between liver Se and animal age. The molar ratio of Hg:Se in the liver was found to be 0.70. This study is the first to measure Se in the teeth of a marine mammal species, and HG-AFS is found to be an effective technique for determining Se in beluga teeth. Tooth Se can be used as predictor for liver and muscle Se, although these relationships may be strongly influenced by the association of Se with Hg in marine mammal tissues. This study contributes to an increased understanding of the storage and metabolism of Se in marine mammals.

Adolescents' perceptions of the aesthetic impact of dental fluorosis vs. other dental conditions in areas with and without water fluoridation.

PubMed

McGrady, Michael G; Ellwood, Roger P; Goodwin, Michaela; Boothman, Nicola; Pretty, Iain A

2012-02-10

The use of fluorides for caries prevention is well established but is linked with an increased risk of dental fluorosis, some of which may be considered to be aesthetically objectionable. Patient opinion should be considered when determining impact on aesthetics. The aim of this study was to assess participant rating of dental aesthetics (from photographic images) of 11 to 13 year olds participating in an epidemiological caries and fluorosis survey in a fluoridated and a non-fluoridated community in Northern England. Consented participants were invited to rank in order of preference (appearance) a collage of 10 computer generated images on a touch-screen laptop. The images comprised an assortment of presentations of teeth that included white teeth, a spectrum of developmental defects of enamel and dental caries. Data were captured directly and exported into SPSS for analysis. Data were available for 1553 participants. In general, there were no significant differences in the rank positions between the fluoridated and non-fluoridated communities, with the exception of teeth with caries and teeth with large demarcated opacities. Very white teeth had the highest rating in both localities. Overall, there was a trend for teeth with fluorosis to be ranked more favourably in the fluoridated community; for TF 1 and TF 2 this preference was significant (p < 0.001). The results of this study suggest teeth that are uniformly very white have the highest preference. The rankings suggest teeth with a fluorosis score of TF 1 may not be considered aesthetically objectionable to this population and age group. The image depicting a tooth with caries and the image with large demarcated opacities were deemed to be the least favoured. Participant preference of images depicting fluorosis falls with increasing severity of fluorosis.

First tooth-set outside the jaws in a vertebrate

PubMed Central

Finarelli, John A.; Coates, Michael I.

2012-01-01

Holocephalans (ratfish, rabbitfish and chimaeras) figure with increasing prominence in studies of gnathostome evolutionary biology. Here, we provide the first complete description of the teeth and toothplates of one of the earliest known holocephalans, Chondrenchelys problematica, including the first unambiguous evidence of a gnathostome with an extra-mandibular dentition. We further demonstrate that holocephalan toothplate ontogeny differs fundamentally from all other extant gnathostome examples, and show how the conjunction of these teeth and toothplates challenges the monophyly of an extinct chondrichthyan clade, the Petalodontiformes. Chondrenchelys provides a novel perspective on the evolution of dentitions in shark-like fishes, expands the known repertoire of gnathostome dental morphologies and offers a glimpse of radically new chondrichthyan ecomorphs, now lost from the modern biota, following the end-Devonian extinctions. PMID:21775333

Investigation of Gear Dynamics Signal Analysis

DTIC Science & Technology

1975-01-01

TEETH, PART 1, The Engineer, pp. 187-190, August 9, 1957. 37. Trbojevic , M. D ., LOAD DISTRIBUTION ON HELICAL GEAR TEETH, PART 2, The Engineer, pp...used in this study, load distribution factors were found to be negligible. A number of investigators, e.g., Poritsky et al,,34 Weber,35 Trbojevic ... D o o •8 aS < D O taO $3 •H £ o GO -P 00 -P W 0 EH 0) •H ptn 32 Figure 15. Generator Loading System. 33 . * t. Figure 17

Spatial-temporal changes in Andean plateau climate and elevation from stable isotopes of mammal teeth

NASA Astrophysics Data System (ADS)

Bershaw, John; Garzione, Carmala N.; Higgins, Pennilyn; MacFadden, Bruce J.; Anaya, Frederico; Alvarenga, Herculano

2010-01-01

Paleoelevation constraints from fossil leaf physiognomy and stable isotopes of sedimentary carbonate suggest that significant surface uplift of the northern Andean plateau, on the order of 2.5 ± 1 km, occurred between ˜ 10.3 and 6.4 Ma. Independent spatial and temporal constraints on paleoelevation and paleoclimate of both the northern and southern plateau are important for understanding the distribution of rapid surface uplift and its relation to climate evolution across the plateau. This study focuses on teeth from modern and extinct mammal taxa (including notoungulates, pyrotheres, and litopterns) spanning ˜ 29 Ma to present, collected from the Altiplano and Eastern Cordillera of Bolivia (16.2°S to 21.4°S), and lowland Brazil. Tooth enamel of large, water-dependent mammals preserves a record of surface water isotopes and the type of plants that animals ingested while their teeth were mineralizing. Previous studies have shown that the δ18O of modern precipitation and surface waters decrease systematically with increasing elevations across the central Andes. Our results from high elevation sites between 3600 and 4100 m show substantially more positive δ18O values for late Oligocene tooth samples compared to < 10 Ma tooth δ18O values. Late Oligocene teeth collected from low elevation sites in southeast Brazil show δ18O values similar (within 2‰) to contemporaneous teeth collected at high elevation in the Eastern Cordillera. This affirms that the Andean plateau was at a very low elevation during the late Oligocene. Late Oligocene teeth from the northern Eastern Cordillera also yield consistent δ13C values of about - 9‰, indicating that the environment was semi-arid at that time. Latitudinal gradients in δ18O values of late Miocene to Pliocene fossil teeth are similar to modern values for large mammals, suggesting that by ˜ 8 Ma in the northern Altiplano and by ˜ 3.6 Ma in the southern Altiplano, both regions had reached high elevation and established a latitudinal rainfall gradient similar to modern.

Micro/nano-particle decorated metal wire for cutting soft matter

NASA Astrophysics Data System (ADS)

Zhang, Wei; Feng, Liang-liang; Wu, Fan; Zhang, Run-run; Wu, Cheng-wei

2016-09-01

To cut soft materials such as biological tissues with minimal damage and reduced positional error is highly desired in medical surgery and biomechanics. After years of natural selection and evolution, mosquitoes have acquired the ability to insert their proboscises into human skin with astonishingly tiny forces. This can be associated with the unique structure of their proboscises, with micro/nano sawteeth, and the distinctive insertion manner: high frequency reciprocating saw cutting. Inspired by these, this communication describes the successful implantation of metal oxide particles onto molybdenum wire surfaces through a sol-calcination process, to form a biomimetic sawblade with a high density of micro/nano saw teeth, where the acidification is essential in terms of generating active anchoring sites on the wire. When used as a sawblade in conjunction with reciprocating action to cut the viscoelastic gel, both the cut-in force and cut-in displacement could be decreased substantially. The cutting speed and frequency of reciprocating action are important operating parameters influencing cut-in force.

Body composition in Pan paniscus compared with Homo sapiens has implications for changes during human evolution.

PubMed

Zihlman, Adrienne L; Bolter, Debra R

2015-06-16

The human body has been shaped by natural selection during the past 4-5 million years. Fossils preserve bones and teeth but lack muscle, skin, fat, and organs. To understand the evolution of the human form, information about both soft and hard tissues of our ancestors is needed. Our closest living relatives of the genus Pan provide the best comparative model to those ancestors. Here, we present data on the body composition of 13 bonobos (Pan paniscus) measured during anatomical dissections and compare the data with Homo sapiens. These comparative data suggest that both females and males (i) increased body fat, (ii) decreased relative muscle mass, (iii) redistributed muscle mass to lower limbs, and (iv) decreased relative mass of skin during human evolution. Comparison of soft tissues between Pan and Homo provides new insights into the function and evolution of body composition.

Body composition in Pan paniscus compared with Homo sapiens has implications for changes during human evolution

PubMed Central

Zihlman, Adrienne L.; Bolter, Debra R.

2015-01-01

The human body has been shaped by natural selection during the past 4–5 million years. Fossils preserve bones and teeth but lack muscle, skin, fat, and organs. To understand the evolution of the human form, information about both soft and hard tissues of our ancestors is needed. Our closest living relatives of the genus Pan provide the best comparative model to those ancestors. Here, we present data on the body composition of 13 bonobos (Pan paniscus) measured during anatomical dissections and compare the data with Homo sapiens. These comparative data suggest that both females and males (i) increased body fat, (ii) decreased relative muscle mass, (iii) redistributed muscle mass to lower limbs, and (iv) decreased relative mass of skin during human evolution. Comparison of soft tissues between Pan and Homo provides new insights into the function and evolution of body composition. PMID:26034269

Evolutionary aspects of the development of teeth and baleen in the bowhead whale.

PubMed

Thewissen, J G M; Hieronymus, Tobin L; George, John C; Suydam, Robert; Stimmelmayr, Raphaela; McBurney, Denise

2017-04-01

In utero, baleen whales initiate the development of several dozens of teeth in upper and lower jaws. These tooth germs reach the bell stage and are sometimes mineralized, but toward the end of prenatal life they are resorbed and no trace remains after birth. Around the time that the germs disappear, the keratinous baleen plates start to form in the upper jaw, and these form the food-collecting mechanism. Baleen whale ancestors had two generations of teeth and never developed baleen, and the prenatal teeth of modern fetuses are usually interpreted as an evolutionary leftover. We investigated the development of teeth and baleen in bowhead whale fetuses using histological and immunohistochemical evidence. We found that upper and lower dentition initially follow similar developmental pathways. As development proceeds, upper and lower tooth germs diverge developmentally. Lower tooth germs differ along the length of the jaw, reminiscent of a heterodont dentition of cetacean ancestors, and lingual processes of the dental lamina represent initiation of tooth bud formation of replacement teeth. Upper tooth germs remain homodont and there is no evidence of a secondary dentition. After these germs disappear, the oral epithelium thickens to form the baleen plates, and the protein FGF-4 displays a signaling pattern reminiscent of baleen plates. In laboratory mammals, FGF-4 is not involved in the formation of hair or palatal rugae, but it is involved in tooth development. This leads us to propose that the signaling cascade that forms teeth in most mammals has been exapted to be involved in baleen plate ontogeny in mysticetes. © 2017 Anatomical Society.

Continuously growing rodent molars result from a predictable quantitative evolutionary change over 50 million years

PubMed Central

Mushegyan, Vagan; Eronen, Jussi T.; Lawing, A. Michelle; Sharir, Amnon; Janis, Christine; Jernvall, Jukka; Klein, Ophir D.

2015-01-01

Summary The fossil record is widely informative about evolution, but fossils are not systematically used to study the evolution of stem cell-driven renewal. Here, we examined evolution of the continuous growth (hypselodonty) of rodent molar teeth, which is fuelled by the presence of dental stem cells. We studied occurrences of 3500 North American rodent fossils, ranging from 50 million years ago (mya) to 2 mya. We examined changes in molar height to determine if evolution of hypselodonty shows distinct patterns in the fossil record, and we found that hypselodont taxa emerged through intermediate forms of increasing crown height. Next, we designed a Markov simulation model, which replicated molar height increases throughout the Cenozoic, and, moreover, evolution of hypselodonty. Thus, by extension, the retention of the adult stem-cell niche appears to be a predictable quantitative rather than a stochastic qualitative process. Our analyses predict that hypselodonty will eventually become the dominant phenotype. PMID:25921530

Fracture behavior of human molars.

PubMed

Keown, Amanda J; Lee, James J-W; Bush, Mark B

2012-12-01

Despite the durability of human teeth, which are able to withstand repeated loading while maintaining form and function, they are still susceptible to fracture. We focus here on longitudinal fracture in molar teeth-channel-like cracks that run along the enamel sidewall of the tooth between the gum line (cemento-enamel junction-CEJ) and the occlusal surface. Such fractures can often be painful and necessitate costly restorative work. The following study describes fracture experiments made on molar teeth of humans in which the molars are placed under axial compressive load using a hard indenting plate in order to induce longitudinal cracks in the enamel. Observed damage modes include fractures originating in the occlusal region ('radial-median cracks') and fractures emanating from the margin of the enamel in the region of the CEJ ('margin cracks'), as well as 'spalling' of enamel (the linking of longitudinal cracks). The loading conditions that govern fracture behavior in enamel are reported and observations made of the evolution of fracture as the load is increased. Relatively low loads were required to induce observable crack initiation-approximately 100 N for radial-median cracks and 200 N for margin cracks-both of which are less than the reported maximum biting force on a single molar tooth of several hundred Newtons. Unstable crack growth was observed to take place soon after and occurred at loads lower than those calculated by the current fracture models. Multiple cracks were observed on a single cusp, their interactions influencing crack growth behavior. The majority of the teeth tested in this study were noted to exhibit margin cracks prior to compression testing, which were apparently formed during the functional lifetime of the tooth. Such teeth were still able to withstand additional loading prior to catastrophic fracture, highlighting the remarkable damage containment capabilities of the natural tooth structure.

Understanding External Cervical Resorption in Vital Teeth.

PubMed

Mavridou, Athina M; Hauben, Esther; Wevers, Martine; Schepers, Evert; Bergmans, Lars; Lambrechts, Paul

2016-12-01

The aim of this study was to investigate the 3-dimensional (3D) structure and the cellular and tissue characteristics of external cervical resorption (ECR) in vital teeth and to understand the phenomenon of ECR by combining histomorphological and radiographic findings. Twenty-seven cases of vital permanent teeth displaying ECR were investigated. ECR diagnosis was based on clinical and radiographic examination with cone-beam computed tomographic imaging. The extracted teeth were further analyzed by using nanofocus computed tomographic imaging, hard tissue histology, and scanning electron microscopy. All examined teeth showed some common characteristics. Based on the clinical and experimental findings, a 3-stage mechanism of ECR was proposed. At the first stage (ie, the initiation stage), ECR was initiated at the cementum below the gingival epithelial attachment. At the second stage (ie, the resorption stage), the resorption invaded the tooth structure 3-dimensionally toward the pulp space. However, it did not penetrate the pulp space because of the presence of a pericanalar resorption-resistant sheet. This layer was observed to consist of predentin, dentin, and occasionally reparative mineralized (bonelike) tissue, having a fluctuating thickness averaging 210 μm. At the last advanced stage (ie, the repair stage), repair took place by an ingrowth and apposition of bonelike tissue into the resorption cavity. During the reparative stage, repair and remodeling phenomena evolve simultaneously, whereas both resorption and reparative stages progress in parallel at different areas of the tooth. ECR is a dynamic and complex condition that involves periodontal and endodontic tissues. Using clinical, histologic, radiographic, and scanning microscopic analysis, a better understanding of the evolution of ECR is possible. Based on the experimental findings, a 3-stage mechanism for the initiation and growth of ECR is proposed. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Synchrotron imaging of dentition provides insights into the biology of Hesperornis and Ichthyornis, the "last" toothed birds.

PubMed

Dumont, Maïtena; Tafforeau, Paul; Bertin, Thomas; Bhullar, Bhart-Anjan; Field, Daniel; Schulp, Anne; Strilisky, Brandon; Thivichon-Prince, Béatrice; Viriot, Laurent; Louchart, Antoine

2016-09-23

The dentitions of extinct organisms can provide pivotal information regarding their phylogenetic position, as well as paleobiology, diet, development, and growth. Extant birds are edentulous (toothless), but their closest relatives among stem birds, the Cretaceous Hesperornithiformes and Ichthyornithiformes, retained teeth. Despite their significant phylogenetic position immediately outside the avian crown group, the dentitions of these taxa have never been studied in detail. To obtain new insight into the biology of these 'last' toothed birds, we use cutting-edge visualisation techniques to describe their dentitions at unprecedented levels of detail, in particular propagation phase contrast x-ray synchrotron microtomography at high-resolution. Among other characteristics of tooth shape, growth, attachment, implantation, replacement, and dental tissue microstructures, revealed by these analyses, we find that tooth morphology and ornamentation differ greatly between the Hesperornithiformes and Ichthyornithiformes. We also highlight the first Old World, and youngest record of the major Mesozoic clade Ichthyornithiformes. Both taxa exhibit extremely thin and simple enamel. The extension rate of Hesperornis tooth dentine appears relatively high compared to non-avian dinosaurs. Root attachment is found for the first time to be fully thecodont via gomphosis in both taxa, but in Hesperornis secondary evolution led to teeth implantation in a groove, at least locally without a periodontal ligament. Dental replacement is shown to be lingual via a resorption pit in the root, in both taxa. Our results allow comparison with other archosaurs and also mammals, with implications regarding dental character evolution across amniotes. Some dental features of the 'last' toothed birds can be interpreted as functional adaptations related to diet and mode of predation, while others appear to be products of their peculiar phylogenetic heritage. The autapomorphic Hesperornis groove might have favoured firmer root attachment. These observations highlight complexity in the evolutionary history of tooth reduction in the avian lineage and also clarify alleged avian dental characteristics in the frame of a long-standing debate on bird origins. Finally, new hypotheses emerge that will possibly be tested by further analyses of avian teeth, for instance regarding dental replacement rates, or simplification and thinning of enamel throughout the course of early avian evolution.

Novel System for Bite-Force Sensing and Monitoring Based on Magnetic Near Field Communication

PubMed Central

Lantada, Andres Diaz; Bris, Carlos González; Morgado, Pilar Lafont; Maudes, Jesús Sanz

2012-01-01

Intraoral devices for bite-force sensing have several applications in odontology and maxillofacial surgery, as bite-force measurements provide additional information to help understand the characteristics of bruxism disorders and can also be of help for the evaluation of post-surgical evolution and for comparison of alternative treatments. A new system for measuring human bite forces is proposed in this work. This system has future applications for the monitoring of bruxism events and as a complement for its conventional diagnosis. Bruxism is a pathology consisting of grinding or tight clenching of the upper and lower teeth, which leads to several problems such as lesions to the teeth, headaches, orofacial pain and important disorders of the temporomandibular joint. The prototype uses a magnetic field communication scheme similar to low-frequency radio frequency identification (RFID) technology (NFC). The reader generates a low-frequency magnetic field that is used as the information carrier and powers the sensor. The system is notable because it uses an intra-mouth passive sensor and an external interrogator, which remotely records and processes information regarding a patient's dental activity. This permits a quantitative assessment of bite-force, without requiring intra-mouth batteries, and can provide supplementary information to polysomnographic recordings, current most adequate early diagnostic method, so as to initiate corrective actions before irreversible dental wear appears. In addition to describing the system's operational principles and the manufacture of personalized prototypes, this report will also demonstrate the feasibility of the system and results from the first in vitro and in vivo trials. PMID:23112669

Temporary Anchorage Device: An Epitome of Anchorage in Orthodontic Treatment

PubMed Central

Nayak, US Krishna; Hegde, Amitha M; Jacob, Mary

2011-01-01

One of the most important phases of oral health is the form and function of the oral mechanism. Recently, pediatric dentists are concerned with the obvious esthetic disabilities and the pathologic implications of the malposed teeth. Interceptive and functional orthodontic treatment is playing a major role in these discrepancies. Anchorage is an important consideration in orthodontics, particularly if force is applied entirely to the teeth. For many years, clinicians have searched for a form of anchorage that does not rely on patient cooperation. During the last few decades, a wealth of new information has accumulated to such an extent that the present authors thought it appropriate to let these advances make an impact by suggesting a revised definition and classification of anchorage. This paper also gives a brief insight on evolution of anchorage and its application in pediatric dentistry. PMID:27672255

Photoelastic analysis of stress distribution in oral rehabilitation.

PubMed

Turcio, Karina Helga Leal; Goiato, Marcelo Coelho; Gennari Filho, Humberto; dos Santos, Daniela Micheline

2009-03-01

The purpose of this study was to present a literature review about photoelasticity, a laboratory method for evaluation of implants prosthesis behavior. Fixed or removable prostheses function as levers on supporting teeth, allowing forces to cause tooth movement if not carefully planned. Hence, during treatment planning, the dentist must be aware of the biomechanics involved and prevent movement of supporting teeth, decreasing lever-type forces generated by these prosthesis. Photoelastic analysis has great applicability in restorative dentistry as it allows prediction and minimization of biomechanical critical points through modifications in treatment planning.

[Non-destructive, preclinical evaluation of root canal anatomy of human teeth with flat-panel detector volume CT (FD-VCT)].

PubMed

Heidrich, G; Hassepass, F; Dullin, C; Attin, T; Grabbe, E; Hannig, C

2005-12-01

Successful endodontic diagnostics and therapy call for adequate depiction of the root canal anatomy with multimodal diagnostic imaging. The aim of the present study is to evaluate visualization of the endodont with flat-panel detector volume CT (FD-VCT). 13 human teeth were examined with the prototype of a FD-VCT. After data acquisition and generation of volume data sets in volume rendering technology (VRT), the findings obtained were compared to conventional X-rays and cross-section preparations of the teeth. The anatomical structures of the endodont such as root canals, side canals and communications between different root canals as well as denticles could be detected precisely with FD-VCT. The length of curved root canals was also determined accurately. The spatial resolution of the system is around 140 microm. Only around 73 % of the main root canals detected with FD-VCT and 87 % of the roots could be visualized with conventional dental X-rays. None of the side canals, shown with FD-VCT, was detectable on conventional X-rays. In all cases the enamel and dentin of the teeth could be well delineated. No differences in image quality could be discerned between stored and freshly extracted teeth, or between primary and adult teeth. FD-VCT is an innovative diagnostic modality in preclinical and experimental use for non-destructive three-dimensional analysis of teeth. Thanks to the high isotropic spatial resolution compared with conventional X-rays, even the minutest structures, such as side canals, can be detected and evaluated. Potential applications in endodontics include diagnostics and evaluation of all steps of root canal treatment, ranging from trepanation through determination of the length of the root canal to obturation.

Effect of magnetic attachment with stress breaker on lateral stress to abutment tooth under overdenture.

PubMed

Gonda, T; Ikebe, K; Ono, T; Nokubi, T

2004-10-01

Recently, a newly developed magnetic attachment with stress breaker was used in retentive components in overdentures. Excessive lateral stress has a more harmful effect on natural teeth than axial stress, and the magnetic attachment with stress breaker is expected to reduce lateral forces on abutment teeth and protect it teeth from excessive stress. However, the properties of this retainer have not yet been determined experimentally. This study compares the lateral forces on abutment teeth for three retainers under loading on the denture base in a model study. A mandibular simulation model is constructed to measure lateral stress. Three types of retentive devices are attached to the canine root. These devices include the conventional root coping, the conventional magnetic attachment and the new magnetic attachment with stress breaker. For each retentive device, load is generated on the occlusal table of the model overdenture, and the lateral stress on the canine root and the displacement of the overdenture measured. The magnetic attachment with stress breaker does not displace the denture and exhibits lower lateral stress in the canine root than conventional root coping and magnetic attachments.

Barium distributions in teeth reveal early life dietary transitions in primates

PubMed Central

Austin, Christine; Smith, Tanya M.; Bradman, Asa; Hinde, Katie; Joannes-Boyau, Renaud; Bishop, David; Hare, Dominic J.; Doble, Philip; Eskenazi, Brenda; Arora, Manish

2013-01-01

Early life dietary transitions reflect fundamental aspects of primate evolution and are important determinants of health in contemporary human populations1,2. Weaning is critical to developmental and reproductive rates; early weaning can have detrimental health effects but enables shorter inter-birth intervals, which influences population growth3. Uncovering early life dietary history in fossils is hampered by the absence of prospectively-validated biomarkers that are not modified during fossilisation4. Here we show that major dietary shifts in early life manifest as compositional variations in dental tissues. Teeth from human children and captive macaques, with prospectively-recorded diet histories, demonstrate that barium (Ba) distributions accurately reflect dietary transitions from the introduction of mother’s milk and through the weaning process. We also document transitions in a Middle Palaeolithic juvenile Neanderthal, which shows a pattern of exclusive breastfeeding for seven months, followed by seven months of supplementation. After this point, Ba levels in enamel returned to baseline prenatal levels, suggesting an abrupt cessation of breastfeeding at 1.2 years of age. Integration of Ba spatial distributions and histological mapping of tooth formation enables novel studies of the evolution of human life history, dietary ontogeny in wild primates, and human health investigations through accurate reconstructions of breastfeeding history. PMID:23698370

Influence of occlusal contact area on cusp defection and stress distribution.

PubMed

Costa, Anna Karina Figueiredo; Xavier, Thaty Aparecida; Paes-Junior, Tarcisio José Arruda; Andreatta-Filho, Oswaldo Daniel; Borges, Alexandre Luiz Souto

2014-11-01

The purpose of this study was to evaluate the effect of occlusal contact area for loading on the cuspal defection and stress distribution in a first premolar restored with a high elastic modulus restorative material. The Rhinoceros 4.0 software was used for modeling the three-dimensional geometries of dental and periodontal structures and the inlay restoration. Thus, two different models, intact and restored teeth with three occlusal contact areas, 0.1, 0.5 and 0.75 mm(2), on enamel at the occlusal surface of buccal and lingual cusps. Finite element analysis (FEA) was performed with the program ANSYS (Workbench 13.0), which generated a mesh with tetrahedral elements with greater refinement in the regions of interest, and was constrained at the bases of cortical and trabecular bone in all axis and loaded with 100 N normal to each contact area. To analysis of maximum principal stress, the smaller occlusal contact area showed greater compressive stress in region of load application for both the intact and inlay restored tooth. However, tensile stresses at the occlusal isthmus were similar for all three tested occlusal contact areas (60 MPa). To displacement of the cusps was higher for teeth with inlay (0.46-0.48 mm). For intact teeth, the smaller contact area showed greater displacement (0.10 mm). For teeth with inlays, the displacement of the cusps were similar in all types of occlusal area. Cuspal displacement was higher in the restored tooth when compared to the intact tooth, but there were no significant variations even with changes in the occlusal contact area. RELEVANCE CLINICAL: Occlusal contacts have a great influence on the positioning of teeth being able to maintain the position and stability of the mandible. Axial loads would be able to generate more uniform stress at the root presenting a greater concentration of load application in the point and the occlusal surface. Thus, is necessary to analyze the relationship between these occlusal contacts as dental wear and subsequent occlusal interferences.

Relationship between tooth value and skin color in patients visiting Royal Medical Services clinics of Jordan.

PubMed

Al-Nsour, Hind Fahed; Al-Zoubi, Tamara Trad; Al-Rimawi, Ali Salaheddin

2018-03-01

Facial and dental aesthetics are becoming of great concern for patients, especially for the younger generation. Tooth color matching and selection is considered a vital element in order to create an attractive beautiful smile. The importance of tooth color matching is to adjust tooth colors to obtain a good match with adjacent teeth and the skin. This is considered a challenge especially if adjacent teeth were lost or records of patients' teeth color were not available. The aim of this study was to determine the relationship between skin complexion and tooth value in a Jordanian population. A cross-sectional study of 520 individuals who were randomly selected and belonging to different age groups, ranging from 15-65 years, with equal sex distribution. These patients visited the dental clinics at different Jordanian military hospitals. The study was carried out over a period of one year from 2015 to 2016. The randomly selected sample was examined by one researcher. Shade of the middle third of the labial surface of central incisor was determined visually using VITA tooth guide, 3D-MASTER shade guide. Tooth shades were divided into two categories according to their value. The skin complexion was identified using Fitzpatrick skin type test, and was categorized into two categories (fair and dark). Data were statistically analyzed using Epi Info version 6. A statistically significant tooth shade value difference was discovered among subjects of different skin color (p<0.0001). Individuals with dark skin tend to have lighter teeth, while individuals with light skin tend to have darker teeth. Out of the 304 participants that were with dark complexion 274 (90%) have light teeth, and only 30 (10%) were with dark teeth. Out of the 216 participants with light complexion 172 (80%) have dark teeth and only 44 (20%) have light teeth. Within the limitation of this study, there was an inverse relation between skin complexion and tooth value among a Jordanian population. Thus, considering the skin complexion when choosing tooth shades is helpful in achieving a pleasing good-looking smile, yet further investigations in this field must be carried out.

Monitoring Demineralization and Subsequent Remineralization of Human Teeth at the Dentin-Enamel Junction with Atomic Force Microscopy.

PubMed

Lechner, Bob-Dan; Röper, Stephanie; Messerschmidt, Jens; Blume, Alfred; Magerle, Robert

2015-09-02

Using atomic force microscopy, we monitored the nanoscale surface morphology of human teeth at the dentin-enamel junction after performing successive demineralization steps with an acidic soft drink. Subsequently, we studied the remineralization process with a paste containing calcium and phosphate ions. Repeated atomic force microscopy imaging of the same sample areas on the sample allowed us to draw detailed conclusions regarding the specific mechanism of the demineralization process and the subsequent remineralization process. The about 1-μm-deep grooves that are caused by the demineralization process were preferentially filled with deposited nanoparticles, leading to smoother enamel and dentine surfaces after 90 min exposure to the remineralizing agent. The deposited material is found to homogeneously cover the enamel and dentine surfaces in the same manner. The temporal evolution of the surface roughness indicates that the remineralization caused by the repair paste proceeds in two distinct successive phases.

Phenotypic and evolutionary implications of modulating the ERK-MAPK cascade using the dentition as a model

NASA Astrophysics Data System (ADS)

Marangoni, Pauline; Charles, Cyril; Tafforeau, Paul; Laugel-Haushalter, Virginie; Joo, Adriane; Bloch-Zupan, Agnès; Klein, Ophir D.; Viriot, Laurent

2015-06-01

The question of phenotypic convergence across a signalling pathway has important implications for both developmental and evolutionary biology. The ERK-MAPK cascade is known to play a central role in dental development, but the relative roles of its components remain unknown. Here we investigate the diversity of dental phenotypes in Spry2-/-, Spry4-/-, and Rsk2-/Y mice, including the incidence of extra teeth, which were lost in the mouse lineage 45 million years ago (Ma). In addition, Sprouty-specific anomalies mimic a phenotype that is absent in extant mice but present in mouse ancestors prior to 9 Ma. Although the mutant lines studied display convergent phenotypes, each gene has a specific role in tooth number determination and crown patterning. The similarities found between teeth in fossils and mutants highlight the pivotal role of the ERK-MAPK cascade during the evolution of the dentition in rodents.

Enamel-like apatite crown covering amorphous mineral in a crayfish mandible

PubMed Central

Bentov, Shmuel; Zaslansky, Paul; Al-Sawalmih, Ali; Masic, Admir; Fratzl, Peter; Sagi, Amir; Berman, Amir; Aichmayer, Barbara

2012-01-01

Carbonated hydroxyapatite is the mineral found in vertebrate bones and teeth, whereas invertebrates utilize calcium carbonate in their mineralized organs. In particular, stable amorphous calcium carbonate is found in many crustaceans. Here we report on an unusual, crystalline enamel-like apatite layer found in the mandibles of the arthropod Cherax quadricarinatus (freshwater crayfish). Despite their very different thermodynamic stabilities, amorphous calcium carbonate, amorphous calcium phosphate, calcite and fluorapatite coexist in well-defined functional layers in close proximity within the mandible. The softer amorphous minerals are found primarily in the bulk of the mandible whereas apatite, the harder and less soluble mineral, forms a wear-resistant, enamel-like coating of the molar tooth. Our findings suggest a unique case of convergent evolution, where similar functional challenges of mastication led to independent developments of structurally and mechanically similar, apatite-based layers in the teeth of genetically remote phyla: vertebrates and crustaceans. PMID:22588301

Fossil evidence of avian crops from the Early Cretaceous of China

PubMed Central

Zheng, Xiaoting; Martin, Larry D.; Zhou, Zhonghe; Burnham, David A.; Zhang, Fucheng; Miao, Desui

2011-01-01

The crop is characteristic of seed-eating birds today, yet little is known about its early history despite remarkable discoveries of many Mesozoic seed-eating birds in the past decade. Here we report the discovery of some early fossil evidence for the presence of a crop in birds. Two Early Cretaceous birds, the basal ornithurine Hongshanornis and a basal avian Sapeornis, demonstrate that an essentially modern avian digestive system formed early in avian evolution. The discovery of a crop in two phylogenetically remote lineages of Early Cretaceous birds and its absence in most intervening forms indicates that it was independently acquired as a specialized seed-eating adaptation. Finally, the reduction or loss of teeth in the forms showing seed-filled crops suggests that granivory was possibly one of the factors that resulted in the reduction of teeth in early birds. PMID:21896733

An evaluation of dental operative simulation materials.

PubMed

He, Li-Hong; Foster Page, Lyndie; Purton, David

2012-01-01

The study was to evaluate the performance of different materials used in dental operative simulation and compare them with those of natural teeth. Three typical phantom teeth materials were compared with extracted permanent teeth by a nanoindentation system and evaluated by students and registered dentists on the drilling sensation of the materials. Moreover, the tool life (machinability) of new cylindrical diamond burs on cutting the sample materials was tested and the burs were observed. Although student and dentist evaluations were scattered and inconclusive, it was found that elastic modulus (E) and hardness (H) were not the main factors in determining the drilling sensation of the materials. The sensation of drilling is a reflection of cutting force and power consumption.An ideal material for dental simulation should be able to generate similar drilling resistance to that of natural tooth, which is the machinability of the material.

Selection criteria of the addendum modification coefficients of spur gear pairs with smaller number of pinion teeth

NASA Astrophysics Data System (ADS)

Atanasiu, V.; Oprişan, C.; Leohchi, D.

2016-08-01

A design procedure for the optimum distribution of the addendum modification coefficients of spur gear pairs with smaller number of pinion teeth is presented for the case of a fixed centred distance. The geometrical, kinematics and load capacity criteria are considered in the design analysis. The geometric and kinematics criteria are used to prevent the negative phenomena of the generating and engagement processes. The relation between the contact pressure of meshing teeth and specific sliding are analysed in relation with addendum modification coefficients. A dynamic model is developed to simulate the load sharing characteristics through a mesh cycle. The specific phenomenon of contact tooth pairs alternation during mesh cycle is integrated in this dynamic load modelling. A comparative study is included, which shows the effects of the distribution factor of the addendum modification coefficients on the contact surface characteristics of the gear pairs.

[Heat-induced symptomatology in human teeth. An in-vitro study].

PubMed

Baldissara, P; Bortolini, S; Papale, G; Scotti, R

1998-09-01

Various dental procedures can generate thermal increase in the dental pulp, in particular if they are incorrectly conducted. In literature the pulp cells are considered very heat sensitive. In this study the symptomatological response of patients during and after thermal administration to the dental crown has been recorded. The analysis of the symptomatology was used as an indication for the definition of the threshold of thermal damage. Twelve healthy teeth of four patients programmed for extraction were subdivided into six couples of homologous teeth. One tooth out of each couple was used for the immediate in vivo recording of the symptoms; the other, once extracted, was used to determine the thermal increase applied through the insertion of a thermocouple sensor. In each couple of teeth the thermal stimulus was equal. The average thermal increase was 11.2 degrees C. Pain starts at temperatures ranging from 39.5 to 50.4 degrees C with an average of 44.6 degrees C. This agrees with classical physiological data which reports the threshold of pain at 45 degrees C. The threshold of pain registered suggests that at temperatures below 44.6 degrees C damage to the dental pulp is improbable, at least in healthy teeth. The limit of 45 degrees C appears, therefore, to be a probable safe threshold, contrary to what is reported in literature.

N-cadherin is required for cytodifferentiation during zebrafish odontogenesis.

PubMed

Verstraeten, B; van Hengel, J; Sanders, E; Van Roy, F; Huysseune, A

2013-04-01

N-cadherin is a well-studied classic cadherin involved in multiple developmental processes and is also known to have a signaling function. Using the zebrafish (Danio rerio) as a model, we tested the hypothesis that tooth morphogenesis is accompanied by dynamic changes in N-cadherin distribution and that absence of N-cadherin disturbs tooth development. N-cadherin, encoded by the gene cdh2, is absent during the initiation and morphogenesis stages of both primary (first-generation) and replacement teeth, as demonstrated by immunohistochemistry. However, N-cadherin is up-regulated at the onset of differentiation of cells of the inner dental epithelium and the dental papilla, i.e., the ameloblasts and odontoblasts, respectively. In the inner dental epithelium, N-cadherin is co-expressed with E-cadherin, excluding the occurrence of cadherin switching such as observed during human tooth development. While early lethality of N-cadherin knockout mice prevents any functional study of N-cadherin in mouse odontogenesis, zebrafish parachute (pac) mutants, deficient for N-cadherin, survive beyond the age when primary teeth normally start to form. In these mutants, the first tooth forms, but its development stops at the early cytodifferentiation stage. N-cadherin deficiency also completely inhibits the development of the other first-generation teeth, possibly due to the absence of N-cadherin signaling once the first tooth has differentiated.

Function of pretribosphenic and tribosphenic mammalian molars inferred from 3D animation

NASA Astrophysics Data System (ADS)

Schultz, Julia A.; Martin, Thomas

2014-10-01

Appearance of the tribosphenic molar in the Late Jurassic (160 Ma) is a crucial innovation for food processing in mammalian evolution. This molar type is characterized by a protocone, a talonid basin and a two-phased chewing cycle, all of which are apomorphic. In this functional study on the teeth of Late Jurassic Dryolestes leiriensis and the living marsupial Monodelphis domestica, we demonstrate that pretribosphenic and tribosphenic molars show fundamental differences of food reduction strategies, representing a shift in dental function during the transition of tribosphenic mammals. By using the Occlusal Fingerprint Analyser (OFA), we simulated the chewing motions of the pretribosphenic Dryolestes that represents an evolutionary precursor condition to such tribosphenic mammals as Monodelphis. Animation of chewing path and detection of collisional contacts between virtual models of teeth suggests that Dryolestes differs from the classical two-phased chewing movement of tribosphenidans, due to the narrowing of the interdental space in cervical (crown-root transition) direction, the inclination angle of the hypoflexid groove, and the unicuspid talonid. The pretribosphenic chewing cycle is equivalent to phase I of the tribosphenic chewing cycle, but the former lacks phase II of the tribosphenic chewing. The new approach can analyze the chewing cycle of the jaw by using polygonal 3D models of tooth surfaces, in a way that is complementary to the electromyography and strain gauge studies of muscle function of living animals. The technique allows alignment and scaling of isolated fossil teeth and utilizes the wear facet orientation and striation of the teeth to reconstruct the chewing path of extinct mammals.

Function of pretribosphenic and tribosphenic mammalian molars inferred from 3D animation.

PubMed

Schultz, Julia A; Martin, Thomas

2014-10-01

Appearance of the tribosphenic molar in the Late Jurassic (160 Ma) is a crucial innovation for food processing in mammalian evolution. This molar type is characterized by a protocone, a talonid basin and a two-phased chewing cycle, all of which are apomorphic. In this functional study on the teeth of Late Jurassic Dryolestes leiriensis and the living marsupial Monodelphis domestica, we demonstrate that pretribosphenic and tribosphenic molars show fundamental differences of food reduction strategies, representing a shift in dental function during the transition of tribosphenic mammals. By using the Occlusal Fingerprint Analyser (OFA), we simulated the chewing motions of the pretribosphenic Dryolestes that represents an evolutionary precursor condition to such tribosphenic mammals as Monodelphis. Animation of chewing path and detection of collisional contacts between virtual models of teeth suggests that Dryolestes differs from the classical two-phased chewing movement of tribosphenidans, due to the narrowing of the interdental space in cervical (crown-root transition) direction, the inclination angle of the hypoflexid groove, and the unicuspid talonid. The pretribosphenic chewing cycle is equivalent to phase I of the tribosphenic chewing cycle, but the former lacks phase II of the tribosphenic chewing. The new approach can analyze the chewing cycle of the jaw by using polygonal 3D models of tooth surfaces, in a way that is complementary to the electromyography and strain gauge studies of muscle function of living animals. The technique allows alignment and scaling of isolated fossil teeth and utilizes the wear facet orientation and striation of the teeth to reconstruct the chewing path of extinct mammals.

Vascularization of the gray whale palate (Cetacea, Mysticeti, Eschrichtius robustus): soft tissue evidence for an alveolar source of blood to baleen.

PubMed

Ekdale, Eric G; Deméré, Thomas A; Berta, Annalisa

2015-04-01

The origin of baleen in mysticetes heralded a major transition during cetacean evolution. Extant mysticetes are edentulous in adulthood, but rudimentary teeth develop in utero within open maxillary and mandibular alveolar grooves. The teeth are resorbed prenatally and the alveolar grooves close as baleen germ develops. Arteries supplying blood to highly vascularized epithelial tissue from which baleen develops pass through lateral nutrient foramina in the area of the embryonic alveolar grooves and rudimentary teeth. Those vessels are hypothesized to be branches of the superior alveolar artery, but branches of the greater palatine arteries may play a role in the baleen vascularization. Through a combination of latex injection, CT, and traditional dissection of the palate of a neonatal gray whale (Eschrichtius robustus), we confirm that the baleen receives blood from vessels within the superior alveolar canal via the lateral foramina. The greater palatine artery is restricted to its own passage with no connections to the baleen. This study has implications for the presence of baleen in extinct taxa by identifying the vessels and bony canals that supply blood to the epithelium from which baleen develops. The results indicate that the lateral foramina in edentulous mysticete fossils are bony correlates for the presence of baleen, and the results can be used to help identify bony canals and foramina that have been used to reconstruct baleen in extinct mysticetes that retained teeth in adulthood. Further comparisons are made with mammals that also possess oral keratin structures, including ruminants, ornithorhynchid monotremes, and sirenians. © 2015 Wiley Periodicals, Inc.

Earliest filter-feeding pterosaur from the Jurassic of China and ecological evolution of Pterodactyloidea

NASA Astrophysics Data System (ADS)

Zhou, Chang-Fu; Gao, Ke-Qin; Yi, Hongyu; Xue, Jinzhuang; Li, Quanguo; Fox, Richard C.

2017-02-01

Pterosaurs were a unique clade of flying reptiles that were contemporaries of dinosaurs in Mesozoic ecosystems. The Pterodactyloidea as the most species-diverse group of pterosaurs dominated the sky during Cretaceous time, but earlier phases of their evolution remain poorly known. Here, we describe a 160 Ma filter-feeding pterosaur from western Liaoning, China, representing the geologically oldest record of the Ctenochasmatidae, a group of exclusive filter feeders characterized by an elongated snout and numerous fine teeth. The new pterosaur took the lead of a major ecological transition in pterosaur evolution from fish-catching to filter-feeding adaptation, prior to the Tithonian (145-152 Ma) diversification of the Ctenochasmatidae. Our research shows that the rise of ctenochasmatid pterosaurs was followed by the burst of eco-morphological divergence of other pterodactyloid clades, which involved a wide range of feeding adaptations that considerably altered the terrestrial ecosystems of the Cretaceous world.

Earliest filter-feeding pterosaur from the Jurassic of China and ecological evolution of Pterodactyloidea.

PubMed

Zhou, Chang-Fu; Gao, Ke-Qin; Yi, Hongyu; Xue, Jinzhuang; Li, Quanguo; Fox, Richard C

2017-02-01

Pterosaurs were a unique clade of flying reptiles that were contemporaries of dinosaurs in Mesozoic ecosystems. The Pterodactyloidea as the most species-diverse group of pterosaurs dominated the sky during Cretaceous time, but earlier phases of their evolution remain poorly known. Here, we describe a 160 Ma filter-feeding pterosaur from western Liaoning, China, representing the geologically oldest record of the Ctenochasmatidae, a group of exclusive filter feeders characterized by an elongated snout and numerous fine teeth. The new pterosaur took the lead of a major ecological transition in pterosaur evolution from fish-catching to filter-feeding adaptation, prior to the Tithonian (145-152 Ma) diversification of the Ctenochasmatidae. Our research shows that the rise of ctenochasmatid pterosaurs was followed by the burst of eco-morphological divergence of other pterodactyloid clades, which involved a wide range of feeding adaptations that considerably altered the terrestrial ecosystems of the Cretaceous world.

Design and implementation of therapeutic ultrasound generating circuit for dental tissue formation and tooth-root healing.

PubMed

Woon Tiong Ang; Scurtescu, C; Wing Hoy; El-Bialy, T; Ying Yin Tsui; Jie Chen

2010-02-01

Biological tissue healing has recently attracted a great deal of research interest in various medical fields. Trauma to teeth, deep and root caries, and orthodontic treatment can all lead to various degrees of root resorption. In our previous study, we showed that low-intensity pulsed ultrasound (LIPUS) enhances the growth of lower incisor apices and accelerates their rate of eruption in rabbits by inducing dental tissue growth. We also performed clinical studies and demonstrated that LIPUS facilitates the healing of orthodontically induced teeth-root resorption in humans. However, the available LIPUS devices are too large to be used comfortably inside the mouth. In this paper, the design and implementation of a low-power LIPUS generator is presented. The generator is the core of the final intraoral device for preventing tooth root loss and enhancing tooth root tissue healing. The generator consists of a power-supply subsystem, an ultrasonic transducer, an impedance-matching circuit, and an integrated circuit composed of a digital controller circuitry and the associated driver circuit. Most of our efforts focus on the design of the impedance-matching circuit and the integrated system-on-chip circuit. The chip was designed and fabricated using 0.8- ¿m high-voltage technology from Dalsa Semiconductor, Inc. The power supply subsystem and its impedance-matching network are implemented using discrete components. The LIPUS generator was tested and verified to function as designed and is capable of producing ultrasound power up to 100 mW in the vicinity of the transducer's resonance frequency at 1.5 MHz. The power efficiency of the circuitry, excluding the power supply subsystem, is estimated at 70%. The final products will be tailored to the exact size of teeth or biological tissue, which is needed to be used for stimulating dental tissue (dentine and cementum) healing.

The variation in surface morphology and hardness of human deciduous teeth samples after laser irradiation

NASA Astrophysics Data System (ADS)

Khalid, Arooj; Bashir, Shazia; Akram, Mahreen; Salman Ahmed, Qazi

2017-11-01

The variation in surface morphology and hardness of human deciduous teeth samples has been investigated after laser irradiation at different wavelengths and energies. Nd:YAG was employed as a source of irradiation for IR (1064 nm) and visible (532 nm) radiation, whereas an excimer laser was used as the source of UV (248 nm) radiation. Scanning electron microscope (SEM) analysis was carried out to reveal the surface morphological evolution of teeth samples. Vickers microhardness tester was employed to investigate the modifications in the hardness of the laser-treated samples. It is observed from SEM analysis that IR wavelength is responsible for ablation of collagen matrix and intertubular dentine. For visible radiation, the ablation of collagen along with hydroxypatite is observed. With UV radiation, the ablation of peritubular dentine is dominant and is responsible for the sealing of tubules. The decrease in hardness at lower energy for both wavelengths is due to the evaporation of carbon content. With increasing energy, evaporation of water along with carbon content, and resolidification and re-organization of inorganic content causes the increase in hardness of the treated dentine. SEM as well as microhardness analyses reveal that laser wavelengths and energy of laser radiation significantly influence the surface morphology and hardness of samples.

Wear biomechanics in the slicing dentition of the giant horned dinosaur Triceratops

PubMed Central

Erickson, Gregory M.; Sidebottom, Mark A.; Kay, David I.; Turner, Kevin T.; Ip, Nathan; Norell, Mark A.; Sawyer, W. Gregory; Krick, Brandon A.

2015-01-01

Herbivorous reptiles rarely evolve occluding dentitions that allow for the mastication (chewing) of plant matter. Conversely, most herbivorous mammals have occluding teeth with complex tissue architectures that self-wear to complex morphologies for orally processing plants. Dinosaurs stand out among reptiles in that several lineages acquired the capacity to masticate. In particular, the horned ceratopsian dinosaurs, among the most successful Late Cretaceous dinosaurian lineages, evolved slicing dentitions for the exploitation of tough, bulky plant matter. We show how Triceratops, a 9-m-long ceratopsian, and its relatives evolved teeth that wore during feeding to create fullers (recessed central regions on cutting blades) on the chewing surfaces. This unique morphology served to reduce friction during feeding. It was achieved through the evolution of a complex suite of osseous dental tissues rivaling the complexity of mammalian dentitions. Tribological (wear) properties of the tissues are preserved in ~66-million-year-old teeth, allowing the creation of a sophisticated three-dimensional biomechanical wear model that reveals how the complexes synergistically wore to create these implements. These findings, along with similar discoveries in hadrosaurids (duck-billed dinosaurs), suggest that tissue-mediated changes in dental morphology may have played a major role in the remarkable ecological diversification of these clades and perhaps other dinosaurian clades capable of mastication. PMID:26601198

On the evolutionary advantage of multi-cusped teeth

PubMed Central

Bush, Mark B.; Barani, Amir; Lawn, Brian R.

2016-01-01

A hallmark of mammalian evolution is a progressive complexity in postcanine tooth morphology. However, the driving force for this complexity remains unclear: whether to expand the versatility in diet source, or to bolster tooth structural integrity. In this study, we take a quantitative approach to this question by examining the roles of number, position and height of multiple cusps in determining sustainable bite forces. Our approach is to use an extended finite-element methodology with due provision for step-by-step growth of an embedded crack to determine how fracture progresses with increasing occlusal load. We argue that multi-cusp postcanine teeth are well configured to withstand high bite forces provided that multiple cusps are contacted simultaneously to share the load. However, contact on a single near-wall cusp diminishes the strength. Location of the load points and cusp height, rather than cusp number or radius, are principal governing factors. Given these findings, we conclude that while complex tooth structures can enhance durability, increases in cusp number are more likely to be driven by the demands of food manipulation. Structural integrity of complex teeth is maintained when individual cusps remain sufficiently distant from the side walls and do not become excessively tall relative to tooth width. PMID:27558851

Salishicetus meadi, a new aetiocetid from the late Oligocene of Washington State and implications for feeding transitions in early mysticete evolution

NASA Astrophysics Data System (ADS)

Peredo, Carlos Mauricio; Pyenson, Nicholas D.

2018-04-01

Living baleen whales, or Mysticeti, lack teeth and instead feed using keratinous baleen plates to sieve prey-laden water. This feeding strategy is profoundly different from that of their toothed ancestors, which processed prey using the differentiated dentition characteristic of mammals. The fossil record of mysticetes reveals stem members that include extinct taxa with dentition, illuminating the morphological states that preceded the loss of teeth and the subsequent origin of baleen. The relationships among stem mysticetes, including putative clades such as Mammalodontidae and Aetiocetidae, remain debatable. Aetiocetids are among the more species-rich clade of stem mysticetes, and known only from fossil localities along the North Pacific coastline. Here, we report a new aetiocetid, Salishicetus meadi gen. et sp. nov, from the late Oligocene of Washington State, USA. Salishicetus preserves a near-complete lower dentition with extensive occlusal wear, indicating that it processed prey using shearing cheek teeth in the same way as its stem cetacean ancestors. Using a matrix with all known species of aetiocetids, we recover a monophyletic Aetiocetidae, crownward of a basal clade of Mammalodontidae. The description of Salishicetus resolves phylogenetic relationships among aetiocetids, which provides a basis for reconstructing ancestral feeding morphology along the stem leading to crown Mysticeti.

A Middle Jurassic heterodontosaurid dinosaur from Patagonia and the evolution of heterodontosaurids.

PubMed

Pol, Diego; Rauhut, Oliver W M; Becerra, Marcos

2011-05-01

Heterodontosauridae is a morphologically divergent group of dinosaurs that has recently been interpreted as one of the most basal clades of Ornithischia. Heterodontosaurid remains were previously known from the Early Jurassic of southern Africa, but recent discoveries and studies have significantly increased the geographical and temporal range for this clade. Here, we report a new ornithischian dinosaur from the Middle Jurassic Cañadón Asfalto Formation in central Patagonia, Argentina. This new taxon, Manidens condorensis gen. et sp. nov., includes well-preserved craniomandibular and postcranial remains and represents the only diagnostic ornithischian specimen yet discovered in the Jurassic of South America so far. Derived features of its anatomy indicate that Manidens belongs to Heterodontosauridae, as the sister taxon of Heterodontosaurus and other South African heterodontosaurids. The presence of posterior dentary teeth with high crowns but lacking extensive wear facets in Manidens suggests that this form represents an intermediate stage in the development of the remarkable adaptations to herbivory described for Heterodontosaurus. The dentition of Manidens condorensis also has autapomorphies, such as asymmetrically arranged denticles in posterior teeth and a mesially projected denticle in the posteriormost teeth. At an estimated total length of 60-75 cm, Manidens furthermore confirms the small size of basal heterodontosaurids.

A Middle Jurassic heterodontosaurid dinosaur from Patagonia and the evolution of heterodontosaurids

NASA Astrophysics Data System (ADS)

Pol, Diego; Rauhut, Oliver W. M.; Becerra, Marcos

2011-05-01

Heterodontosauridae is a morphologically divergent group of dinosaurs that has recently been interpreted as one of the most basal clades of Ornithischia. Heterodontosaurid remains were previously known from the Early Jurassic of southern Africa, but recent discoveries and studies have significantly increased the geographical and temporal range for this clade. Here, we report a new ornithischian dinosaur from the Middle Jurassic Cañadón Asfalto Formation in central Patagonia, Argentina. This new taxon, Manidens condorensis gen. et sp. nov., includes well-preserved craniomandibular and postcranial remains and represents the only diagnostic ornithischian specimen yet discovered in the Jurassic of South America so far. Derived features of its anatomy indicate that Manidens belongs to Heterodontosauridae, as the sister taxon of Heterodontosaurus and other South African heterodontosaurids. The presence of posterior dentary teeth with high crowns but lacking extensive wear facets in Manidens suggests that this form represents an intermediate stage in the development of the remarkable adaptations to herbivory described for Heterodontosaurus. The dentition of Manidens condorensis also has autapomorphies, such as asymmetrically arranged denticles in posterior teeth and a mesially projected denticle in the posteriormost teeth. At an estimated total length of 60-75 cm, Manidens furthermore confirms the small size of basal heterodontosaurids.

Near-infared hyperspectral imaging of teeth for dental caries detection

NASA Astrophysics Data System (ADS)

Zakian, Christian; Pretty, Iain; Ellwood, Roger

2009-11-01

Near-infrared (NIR) is preferred for caries detection compared to visible light imaging because it exhibits low absorption by stain and deeper penetration into teeth. Hyperspectral images from 1000 to 2500 nm have been obtained for a total of 12 extracted teeth (premolars and molars) with different degrees of natural lesion. Analysis of the reflectance spectra suggests that light scattering by porous enamel and absorption by water in dentin can be used to quantify the lesion severity and generate a NIR caries score. Teeth were ground for histological examination after the measurements. The NIR caries score obtained correlates significantly (Spearman's correlation of 0.89, p<0.01) with the corresponding histological score. Results yield a sensitivity of >99% and a specificity of 87.5% for enamel lesions and a sensitivity of 80% and a specificity >99% for dentine lesions. The nature of the technique offers significant advantages, including the ability to map the lesion distribution rather than obtaining single-point measurements, it is also noninvasive, noncontact, and stain insensitive. These results suggest that NIR spectral imaging is a potential clinical technique for quantitative caries diagnosis and can determine the presence of occlusal enamel and dentin lesions.

Near-infrared hyperspectral imaging of teeth for dental caries detection.

PubMed

Zakian, Christian; Pretty, Iain; Ellwood, Roger

2009-01-01

Near-infrared (NIR) is preferred for caries detection compared to visible light imaging because it exhibits low absorption by stain and deeper penetration into teeth. Hyperspectral images from 1000 to 2500 nm have been obtained for a total of 12 extracted teeth (premolars and molars) with different degrees of natural lesion. Analysis of the reflectance spectra suggests that light scattering by porous enamel and absorption by water in dentin can be used to quantify the lesion severity and generate a NIR caries score. Teeth were ground for histological examination after the measurements. The NIR caries score obtained correlates significantly (Spearman's correlation of 0.89, p<0.01) with the corresponding histological score. Results yield a sensitivity of >99% and a specificity of 87.5% for enamel lesions and a sensitivity of 80% and a specificity >99% for dentine lesions. The nature of the technique offers significant advantages, including the ability to map the lesion distribution rather than obtaining single-point measurements, it is also noninvasive, noncontact, and stain insensitive. These results suggest that NIR spectral imaging is a potential clinical technique for quantitative caries diagnosis and can determine the presence of occlusal enamel and dentin lesions.

Thermal measurement of root surface temperatures during application of intracanal laser energy in vitro

NASA Astrophysics Data System (ADS)

Goodis, Harold E.; White, Joel M.; Neev, Joseph

1993-07-01

The use of laser energy to clean, shape, and sterilize a root canal system space involves the generation of heat due to the thermal effect of the laser on the organic tissue contents and dentin walls of that space. If heat generation is above physiologic levels, irreparable damage may occur to the periodontal ligament and surrounding bone. This study measured temperature rise on the outer root surfaces of extracted teeth during intracanal laser exposure. Thirty single rooted, recently extracted teeth free of caries and restorations were accessed pulps extirpated and divided into three groups. Each root canal system was treated with a 1.06 micrometers pulsed Nd:YAG laser with quartz contact probes. Temperatures were recorded for all surfaces (mesial distal, buccal, lingual, apical) with infrared thermography utilizing a detector response time of 1 (mu) sec, sensitivity range (infrared) of 8 to 12 micrometers and a scan rate of 30 frames/sec.

Regulation and Measurement of the Heat Generated by Automatic Tooth Preparation in a Confined Space.

PubMed

Yuan, Fusong; Zheng, Jianqiao; Sun, Yuchun; Wang, Yong; Lyu, Peijun

2017-06-01

The aim of this study was to assess and regulate heat generation in the dental pulp cavity and circumambient temperature around a tooth during laser ablation with a femtosecond laser in a confined space. The automatic tooth preparing technique is one of the traditional oral clinical technology innovations. In this technique, a robot controlled an ultrashort pulse laser to automatically complete the three-dimensional teeth preparing in a confined space. The temperature control is the main measure for protecting the tooth nerve. Ten tooth specimens were irradiated with a femtosecond laser controlled by a robot in a confined space to generate 10 teeth preparation. During the process, four thermocouple sensors were used to record the pulp cavity and circumambient environment temperatures with or without air cooling. A statistical analysis of the temperatures was performed between the conditions with and without air cooling (p < 0.05). The recordings showed that the temperature with air cooling was lower than that without air cooling and that the heat generated in the pulp cavity was lower than the threshold for dental pulp damage. These results indicate that femtosecond laser ablation with air cooling might be an appropriate method for automatic tooth preparing.

Dental eruption in afrotherian mammals

PubMed Central

Asher, Robert J; Lehmann, Thomas

2008-01-01

Background Afrotheria comprises a newly recognized clade of mammals with strong molecular evidence for its monophyly. In contrast, morphological data uniting its diverse constituents, including elephants, sea cows, hyraxes, aardvarks, sengis, tenrecs and golden moles, have been difficult to identify. Here, we suggest relatively late eruption of the permanent dentition as a shared characteristic of afrotherian mammals. This characteristic and other features (such as vertebral anomalies and testicondy) recall the phenotype of a human genetic pathology (cleidocranial dysplasia), correlations with which have not been explored previously in the context of character evolution within the recently established phylogeny of living mammalian clades. Results Although data on the absolute timing of eruption in sengis, golden moles and tenrecs are still unknown, craniometric comparisons for ontogenetic series of these taxa show that considerable skull growth takes place prior to the complete eruption of the permanent cheek teeth. Specimens showing less than half (sengis, golden moles) or two-thirds (tenrecs, hyraxes) of their permanent cheek teeth reach or exceed the median jaw length of conspecifics with a complete dentition. With few exceptions, afrotherians are closer to median adult jaw length with fewer erupted, permanent cheek teeth than comparable stages of non-afrotherians. Manatees (but not dugongs), elephants and hyraxes with known age data show eruption of permanent teeth late in ontogeny relative to other mammals. While the occurrence of delayed eruption, vertebral anomalies and other potential afrotherian synapomorphies resemble some symptoms of a human genetic pathology, these characteristics do not appear to covary significantly among mammalian clades. Conclusion Morphological characteristics shared by such physically disparate animals such as elephants and golden moles are not easy to recognize, but are now known to include late eruption of permanent teeth, in addition to vertebral anomalies, testicondy and other features. Awareness of their possible genetic correlates promises insight into the developmental basis of shared morphological features of afrotherians and other vertebrates. PMID:18366669

Second-generation Platelet Concentrate (Platelet-rich Fibrin) as a Scaffold in Regenerative Endodontics: A Case Series.

PubMed

Bakhtiar, Hengameh; Esmaeili, Shahram; Fakhr Tabatabayi, Setareh; Ellini, Mohammad Reza; Nekoofar, Mohammad Hossein; Dummer, Paul M H

2017-03-01

The purpose of this case series was to report the clinical and radiographic results of a pulp regenerative procedure using platelet-rich fibrin (PRF), a second-generation platelet concentrate, in immature teeth with necrotic pulps. Root canal revascularization using PRF was performed on 4 immature teeth with necrotic pulps. After access cavity preparation, the root canals were irrigated with low concentration sodium hypochlorite solution (1.5% sodium hypochlorite [20 mL/canal, 5 minutes]) and then irrigated with saline (20 mL/canal, 5 minutes). Equal proportions (167 mg) of ciprofloxacin, metronidazole, and cefaclor were mixed and diluted to a final concentration of 1 g/mL. Finally, the canal was sealed with 3-4 mm of a temporary restorative material, and patients were dismissed for 2 to 3 weeks. At the second appointment, 9 mL of the patient's whole blood was obtained and centrifuged to prepare a PRF clot. Canals were irrigated with 17% EDTA, and a sharp spreader was inserted beyond the apex. Then, the PRF clot was placed inside the root canals, and Biodentine (Septodont, Saint-Maur, France) was placed directly over the PRF. The teeth were restored permanently with glass ionomer cement and composite resin. Clinical examinations revealed that all cases were asymptomatic at the recall appointments at 1, 3, 6, 12, and 18 months. Radiographs revealed resolution of the periapical lesions, further root development, and apical closure in all cases. On the basis of the short-term results up to 12 months, PRF clots acted as successful scaffolds for the regeneration of pulpal contents in immature teeth with necrotic pulps. Copyright © 2016 American Association of Endodontists. All rights reserved.

The oldest known priapulid-like scalidophoran animal and its implications for the early evolution of cycloneuralians and ecdysozoans.

PubMed

Liu, Yunhuan; Xiao, Shuhai; Shao, Tiequan; Broce, Jesse; Zhang, Huaqiao

2014-05-01

Morphological phylogenetic analyses suggest that scalidophorans (priapulids, loriciferans, and kinorhynchs) and nematoids (nematodes and nematomorphs) form the ecdysozoan clade Cycloneuralia, which is a sister group to panarthropods. It has been proposed that extant priapulids and Cambrian priapulid-like scalidophorans, because of their conserved evolution, have the potential to illuminate the ancestral morphology, ecology, and developmental biology of highly derived ecdysozoans such as nematods and arthropods. As such, Cambrian fossils, particularly Markuelia and possibly olivooids, can inform the early evolution of scalidophorans, cycloneuralians, and ecdysozoans. However, the scalidophoran Markuelia is known exclusively as embryo fossils, and the olivooids have been alternatively interpreted as cnidarians or cycloneuralians. Here, we describe a post-embryonic scalidophoran fossil Eopriapulites sphinx new genus and species, which represents the oldest known scalidophoran, from the early Cambrian Period (∼535 Ma) in South China. E. sphinx is similar to modern scalidophorans in having an introvert armed with hollow scalids, a collar with coronal scalids, and a pharynx with pharyngeal teeth, but its scalids and pharyngeal teeth are arranged in a hexaradial pattern. Phylogenetically resolved as a stem-group scalidophoran, E. sphinx shares a hexaradial pattern with the hexaradial arrangement of certain anatomical structures in kinorhynchs, loriciferans, nematoids, and Cambrian fossils such as Eolympia pediculata, which could also be a scalidophoran. Thus, the bodyplan of ancestral cycloneuralians may have had a component of hexaradial symmetry (i.e., some but not necessarily all anatomical parts are hexaradially arranged). If panarthropods are nested within paraphyletic cycloneuralians, as several molecular phylogenetic analyses suggest, the ancestral ecdysozoans may have been a legless worm possibly with a component of hexaradial symmetry. © 2014 Wiley Periodicals, Inc.

Periostitis ossificans.

PubMed

VanDoorne, I; Soubry, R; Wackens, G; Goossens, A

1995-09-01

Mandibular periostitis ossificans was assessed in a 18-year-old black boy. This form of chronic osteomyelitis (Garré osteomyelitis) resulted from a periostitis on the 4.8 in association with an infected and ankylosed 4.7. Clinically a firm swelling of the right mandibular angle was noticeable. The diagnosis was confirmed by computed tomography and biopsy. After extraction of the causative teeth, in combination with an antibiotic treatment, a good evolution was obtained. The possible pathogenesis and the differential diagnosis are discussed.

Computed Tomographic Evaluation of K3 Rotary and Stainless Steel K File Instrumentation in Primary Teeth

PubMed Central

Kavitha, Swaminathan; Thomas, Eapen; Anadhan, Vasanthakumari; Vijayakumar, Rajendran

2016-01-01

Introduction The intention of root canal preparation is to reduce infected content and create a root canal shape allowing for a well condensed root filling. Therefore, it is not necessary to remove excessive dentine for successful root canal preparation and concern must be taken not to over instrument as perforations can occur in the thin dentinal walls of primary molars. Aim This study was done to evaluate the time preparation, the risk of lateral perforation and dentine removal of the stainless steel K file and K3 rotary instrumentation in primary teeth. Materials and Methods Seventy-five primary molars were selected and divided into three groups. Using spiral computed tomography the teeth were scanned before instrumentation. Teeth were prepared using a stainless steel K file for manual technique. All the canals were prepared up to file size 35. In K3 rotary files (.02 taper) instrumentation was done up to 35 size file. In K3 rotary files (.04 taper) the instrumentation was done up to 25 size file and simultaneously the instrumentation time was recorded. The instrumented teeth were once again scanned and the images were compared with the images of the uninstrumented canals. Statistical Analysis Data was statistically analysed using Kruskal Wallis One-way ANOVA, Mann-Whitney U-Test and Pearson’s Chi-square Test. Results K3 rotary files (.02 taper) removed a significantly less amount of dentine, required less instrumentation time than a stainless steel K file. Conclusion K3 files (.02 taper) generated less dentine removal than the stainless steel K file and K3 files (.04 taper). K3 rotary files (.02 taper) were more effective for root canal instrumentation in primary teeth. PMID:26894166

Odontogenesis in the Veiled Chameleon (Chamaeleo calyptratus).

PubMed

Buchtová, Marcela; Zahradníček, Oldřich; Balková, Simona; Tucker, Abigail S

2013-02-01

Replacement teeth in reptiles and mammals develop from a successional dental lamina. In monophyodont (single generation) species such as the mouse, no successional lamina develops. We have selected a reptilian monophyodont species - the Veiled Chameleon (Chamaeleo calyptratus) - to investigate whether this is a common characteristic of species that do not have replacement teeth. Furthermore, we focus on the sequence of tooth initiation along the jaw, and tooth attachment to the bones. Embryos of the Veiled Chameleon were collected during the first 6 months of incubation (from the 5th to 24th week) at 7-day intervals. After five weeks of incubation, an epithelial thickening was present as a shallow protrusion into the mesenchyme. A week later, the epithelium elongated more deeply into the mesenchyme to form the dental lamina. The formation of all tooth germs along the jaw was initiated from the tip of the dental lamina. Development of a successional dental lamina was initiated during the pre-hatching period but this structure became markedly reduced during juvenile stages. MicroCT analysis showed the presence of a heterodont dentition in young chameleons with multicuspid teeth in the caudal jaw area and simpler monocuspid teeth rostrally. Unlike the pleurodont teeth of most reptilian species, chameleon teeth are acrodontly ankylosed to the bones of the jaw. Odontoblasts produced a layer of predentine that connected the dentine to the supporting bone, with both tooth and bone protruding out of the oral cavity and acting as a functional unit. Chameleons may provide new and useful information to study the molecular interaction at the tooth-bone interface in physiological as well as pathological conditions. Copyright © 2012 Elsevier Ltd. All rights reserved.

Evaluating the effects of consolidation on intrusion and retraction using temporary anchorage devices-a FEM study.

PubMed

Namburi, Monica; Nagothu, Sleevaraju; Kumar, Chetan S; Chakrapani, N; Hanumantharao, C H; Kumar, Supradeep K

2017-12-01

Extraction of premolars and retracting the anterior teeth using mini-implants and anterior retraction hooks became advent now a day. In such treatments, consolidation of arches is not done in regular practice. So, the present study is concentrated on effects of consolidation in two implant and three implant combinations of retraction and intrusion. A three-dimensional FEM model of maxillary teeth and periodontal ligament housed in the alveolar bone with the first premolars extracted is generated with appropriate number of elements and nodes. The models were broadly divided into two groups according to the no. of implants. Mini-implants were placed bilaterally between the second premolar and molar at varying heights (7, 10, 13 mm) in group I, and along with bilateral implants, an additional mid-implant is placed between the central incisors as group II. Brackets with 0.022 slot were placed on the teeth, 19 × 25 SS wire is placed in the brackets, an anterior retraction hook was placed at 9 mm height, and analysis was done to evaluate the stresses and displacement patterns in consolidation and non-consolidation models. The results showed that consolidation of the anterior teeth during intrusion and retraction shows various advantages such as less stresses on the bone, PDL, implant, teeth, and no labial flaring of the anterior teeth and three implant system, i.e., two bilateral implant at 10 mm and a mid-implant at 12 mm between the centrals has shown to be better than other models as bodily movement is observed. Consolidation is better than non consolidation during enmasse retraction and intrusion.

Inherited retarded eruption in the permanent dentition.

PubMed

Rasmussen, P; Kotsaki, A

1997-01-01

The term retarded eruption, may be used in cases where eruption is inhibited, causing an interruption in the coordination of tooth formation and tooth eruption. The phenomenon may be local or general, and several etiological factors for retarded eruption have been listed, comprising a lack of space, ankylosis, cysts, supernumerary teeth, hormone and vitamin deficiencies and several developmental disturbances and syndromes. The present paper describes several cases of retarded eruption where no factors other than inheritance have been evident. So far 14 cases have been evaluated, 9 boys and 5 girls. In addition several cases have been registered among parents and grandparents of the probands. Typical features are: retarded eruption, defined as more than 3 SD beyond mean eruption figures, comprises all teeth in the permanent dentition, and in 5 cases also second primary molars. The chronology of tooth formation are within normal limits. Consequently the teeth finish development still laying deeply buried in the jaws, often in aberrant positions and with curves or hooks on the roots. When the teeth finally get the "signal" for eruption, 5-15 years beyond normal eruption time, they move rather quickly into right positions, despite the long eruption paths and the hooked roots. Permanent teeth without, as well as with predecessors, are affected. Extraction of predecessors does not seem to provoke eruption. The main features in management are to take care of the primary teeth, to improve-esthetics, and offer surgery and orthodontics when needed. Analyses of pedigrees indicates that the genetic transmittance may be autosomal dominant as both sexes are affected, about half of the siblings show the trait, and the trait shows continuity through generations.

Towards a gene regulatory network perspective on phenotypic plasticity, genetic accommodation and genetic assimilation

PubMed Central

Pfennig, David W.; Ehrenreich, Ian M.

2014-01-01

Many organisms can produce alternative phenotypes in direct response to different environmental conditions, a phenomenon known as phenotypic plasticity. The environmentally sensitive gene regulatory networks (GRNs) that mediate such developmental flexibility are largely unknown. Yet, characterizing these GRNs is important not only for elucidating plasticity’s molecular basis, but also for shedding light onto whether and how plasticity might impact evolution. In this issue of Molecular Ecology, Schneider et al.) describe one of the first efforts to determine the GRN underlying a plastic trait. They focus on diet-induced plasticity in the cichlid fish, Astatoreochromis alluaudi. Depending on whether soft food (e.g. insects) or hard food (e.g. molluscs) is consumed, this species forms a lower pharyngeal jaw (LPJ) with many fine teeth or with fewer molar-like teeth, respectively (Fig. 1). The authors previously identified genes that are differentially expressed between LPJ morphs during early development. In the present study, they examine the expression of 19 of these genes across development and diet. By analysing these transcriptional data in combination with information on putative transcription factor binding sites, they construct a GRN that explains observed gene expression patterns and is likely to control LPJ morphology. This work advances our understanding of how plasticity can arise as a consequence of environmentally sensitive GRNs and promises to help illuminate how changes in such GRNs could facilitate evolution. PMID:25208504

Automated system for periodontal disease diagnosis

NASA Astrophysics Data System (ADS)

Albalat, Salvador E.; Alcaniz-Raya, Mariano L.; Juan, M. Carmen; Grau Colomer, Vincente; Monserrat, Carlos

1997-04-01

Evolution of periodontal disease is one of the most important data for the clinicians in order to achieve correct planning and treatment. Clinical measure of the periodontal sulcus depth is the most important datum to know the exact state of periodontal disease. These measures must be done periodically study bone resorption evolution around teeth. Time factor of resorption indicates aggressiveness of periodontitis. Manual probes are commonly used with direct reading. Mechanical probes give automatic signal but this method uses complicated and heavy probes that are only limited for University researchers. Probe position must be the same to have right diagnosis. Digital image analysis of periodontal probing provides practical, accurate and easy tool. Gum and plaque index could also be digitally measured with this method.

Numerical Simulation Of Cutting Of Gear Teeth

NASA Technical Reports Server (NTRS)

Oswald, Fred B.; Huston, Ronald L.; Mavriplis, Dimitrios

1994-01-01

Shapes of gear teeth produced by gear cutters of specified shape simulated computationally, according to approach based on principles of differential geometry. Results of computer simulation displayed as computer graphics and/or used in analyses of design, manufacturing, and performance of gears. Applicable to both standard and non-standard gear-tooth forms. Accelerates and facilitates analysis of alternative designs of gears and cutters. Simulation extended to study generation of surfaces other than gears. Applied to cams, bearings, and surfaces of arbitrary rolling elements as well as to gears. Possible to develop analogous procedures for simulating manufacture of skin surfaces like automobile fenders, airfoils, and ship hulls.

Slickenside formation by surface melting during the mechanical excavation of rock

NASA Astrophysics Data System (ADS)

Spray, John G.

This work discusses the nature and origin of slickensides generated by the impingement of high-carbon steel teeth on sandstone during the mechanical excavation of boulders by back shovel and front loader. The slickensides show a number of morphological features that can be related to the direction and sense of tooth displacement, including striations, carrot-shaped grooves, curved fractures and steps. Scanning and transmission electron microscopy reveal that the slickensides comprise a layer of Fe-enriched, glass-bonded gouge (≤150 μm thick). The estimated shear stresses and velocities realized at the tooth-rock interface (175 MPa at 1 m s -1 for the back shovel and 100 MPa at 2 m s -1 for the front loader) indicate that a heat production of 150-200 MW m -2 and mean surface temperature of 1400-1700°C were achieved. XRF and microprobe analyses confirm that localized bulk melting and Fe-enrichment of the surface occurred during slip. The excavator-generated slickensides provide an analogue for the effects of a single co-seismic event in the evolution of a shallow, relatively dry fault surface. From a simple consideration of energetics under these conditions, it is apparent that localized surface melting should be commonplace. Such an analogue may be useful as a guide for recognizing melt features in natural slickensides, features that would otherwise tend to be obscured during lengthier periods of interseismic surface modification.

3-dimensional orthodontics visualization system with dental study models and orthopantomograms

NASA Astrophysics Data System (ADS)

Zhang, Hua; Ong, S. H.; Foong, K. W. C.; Dhar, T.

2005-04-01

The aim of this study is to develop a system that provides 3-dimensional visualization of orthodontic treatments. Dental plaster models and corresponding orthopantomogram (dental panoramic tomogram) are first digitized and fed into the system. A semi-auto segmentation technique is applied to the plaster models to detect the dental arches, tooth interstices and gum margins, which are used to extract individual crown models. 3-dimensional representation of roots, generated by deforming generic tooth models with orthopantomogram using radial basis functions, is attached to corresponding crowns to enable visualization of complete teeth. An optional algorithm to close the gaps between deformed roots and actual crowns by using multi-quadratic radial basis functions is also presented, which is capable of generating smooth mesh representation of complete 3-dimensional teeth. User interface is carefully designed to achieve a flexible system with as much user friendliness as possible. Manual calibration and correction is possible throughout the data processing steps to compensate occasional misbehaviors of automatic procedures. By allowing the users to move and re-arrange individual teeth (with their roots) on a full dentition, this orthodontic visualization system provides an easy and accurate way of simulation and planning of orthodontic treatment. Its capability of presenting 3-dimensional root information with only study models and orthopantomogram is especially useful for patients who do not undergo CT scanning, which is not a routine procedure in most orthodontic cases.

Temperature analysis during bonding of brackets using LED or halogen light base units.

PubMed

Silva, Paulo César Gomes; De Fátima Zanirato Lizarelli, Rosane; Moriyama, Lílian Tan; De Toledo Porto Neto, Sizenando; Bagnato, Vanderlei Salvador

2005-02-01

The purpose of our investigation is to compare the intrapulpal temperature changes following blue LED system and halogen lamp irradiation at the enamel surface of permanent teeth. The fixation of brackets using composite resin is more comfortable and faster when using a photo-curable composite. Several light sources can be used: halogens, arc plasma, lasers, and recently blue LED systems. An important aspect to be observed during such a procedures is the temperature change. In this study, we have used nine human extracted permanent teeth: three central incisors, three lateral incisors, and three canines. Teeth were exposed to two light sources: blue LED system (preliminary commercial model LEC 470-II) and halogen lamp (conventional photo-cure equipment). The surface of teeth was exposed for 20, 40, and 60 sec at the buccal and lingual enamel surface with an angle of 45 degrees. Temperature values measured by a thermistor placed at pulpar chamber were read in time intervals of 1 sec. We obtained plots showing the temperature evolution as a function of time for each experiment. There is a correlation between heating quantity and exposition time of light source: with increasing exposition time, heating increases into the pulpal chamber. The halogen lamp showed higher heating than the LED system, which showed a shorter time of cooling than halogen lamp. The blue LED system seems like the indicated light source for photo-cure of composite resin during the bonding of brackets. The fixation of brackets using composite resin is more comfortable and faster when using a photo-curable composite. Blue LED equipment did not heat during its use. This could permit a shorter clinical time of operation and better performance.

A bizarre new toothed mysticete (Cetacea) from Australia and the early evolution of baleen whales.

PubMed

Fitzgerald, Erich M G

2006-12-07

Extant baleen whales (Cetacea, Mysticeti) are all large filter-feeding marine mammals that lack teeth as adults, instead possessing baleen, and feed on small marine animals in bulk. The early evolution of these superlative mammals, and their unique feeding method, has hitherto remained enigmatic. Here, I report a new toothed mysticete from the Late Oligocene of Australia that is more archaic than any previously described. Unlike all other mysticetes, this new whale was small, had enormous eyes and lacked derived adaptations for bulk filter-feeding. Several morphological features suggest that this mysticete was a macrophagous predator, being convergent on some Mesozoic marine reptiles and the extant leopard seal (Hydrurga leptonyx). It thus refutes the notions that all stem mysticetes were filter-feeders, and that the origins and initial radiation of mysticetes was linked to the evolution of filter-feeding. Mysticetes evidently radiated into a variety of disparate forms and feeding ecologies before the evolution of baleen or filter-feeding. The phylogenetic context of the new whale indicates that basal mysticetes were macrophagous predators that did not employ filter-feeding or echolocation, and that the evolution of characters associated with bulk filter-feeding was gradual.

A bizarre new toothed mysticete (Cetacea) from Australia and the early evolution of baleen whales

PubMed Central

Fitzgerald, Erich M.G

2006-01-01

Extant baleen whales (Cetacea, Mysticeti) are all large filter-feeding marine mammals that lack teeth as adults, instead possessing baleen, and feed on small marine animals in bulk. The early evolution of these superlative mammals, and their unique feeding method, has hitherto remained enigmatic. Here, I report a new toothed mysticete from the Late Oligocene of Australia that is more archaic than any previously described. Unlike all other mysticetes, this new whale was small, had enormous eyes and lacked derived adaptations for bulk filter-feeding. Several morphological features suggest that this mysticete was a macrophagous predator, being convergent on some Mesozoic marine reptiles and the extant leopard seal (Hydrurga leptonyx). It thus refutes the notions that all stem mysticetes were filter-feeders, and that the origins and initial radiation of mysticetes was linked to the evolution of filter-feeding. Mysticetes evidently radiated into a variety of disparate forms and feeding ecologies before the evolution of baleen or filter-feeding. The phylogenetic context of the new whale indicates that basal mysticetes were macrophagous predators that did not employ filter-feeding or echolocation, and that the evolution of characters associated with bulk filter-feeding was gradual. PMID:17015308

Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA.

PubMed

Qamheya, Ala Hassan A; Yeniyol, Sinem; Arısan, Volkan

2015-01-01

Many people have life-long problems with their dentures, such as difficulties with speaking and eating, loose denture, and sore mouth syndrome. The evolution of dental implant supported prosthesis gives these patients normal healthy life for their functional and esthetic advantages. This case report presents the fabrication of maxillary implant supported hybrid prosthesis by using Nanofilled Composite (NFC) material in teeth construction to rehabilitate a complete denture wearer patient.

Full Mouth Oral Rehabilitation by Maxillary Implant Supported Hybrid Denture Employing a Fiber Reinforced Material Instead of Conventional PMMA

PubMed Central

Qamheya, Ala Hassan A.; Arısan, Volkan

2015-01-01

Many people have life-long problems with their dentures, such as difficulties with speaking and eating, loose denture, and sore mouth syndrome. The evolution of dental implant supported prosthesis gives these patients normal healthy life for their functional and esthetic advantages. This case report presents the fabrication of maxillary implant supported hybrid prosthesis by using Nanofilled Composite (NFC) material in teeth construction to rehabilitate a complete denture wearer patient. PMID:26557392

Associations Between Caries Experience, Nutritional Status, Oral Hygiene, and Diet in a Multigenerational Cohort.

PubMed

Gonçalves, Juliana De Abreu; Moreira, Emilia Addison Machado; Rauen, Michelle Soares; Rossi, Alessandra; Borgatto, Adriano Ferreti

2016-01-01

To assess intergenerational associations between dental caries and nutritional status, oral hygiene habits, and diet. A cross-sectional study was conducted with three generations of 54 families. Inclusion criteria were senior citizens with an adult son/daughter who also had a child (five to 12 years old). Dental caries was assessed using the decayed, missing, filled, primary teeth (dmft) and permanent teeth (DMFT) indexes. Nutritional status was evaluated using the body mass index (BMI), waist circumference, and percentage of body fat. Dietary habits, oral hygiene habits, and socioeconomic status were evaluated using a structured questionnaire. Children/adolescents with higher BMI had a lower dmft/DMFT index, and those who never or almost never consumed fruits and vegetables as snacks had a higher dmft/ DMFT index. When parents did not visit the dentist regularly, children/adolescents had more teeth affected by dental caries. When parents consumed sugar two or more times between meals, the number of affected teeth in children/adolescents increased. When children/ adolescents had a higher body mass index and they consumed fruits/vegetables as snacks more frequently, their caries experiences were lower. When their parents' did not visit the dentist regularly and they consumed sugar between meals more frequently, the children's caries experiences were higher.

Phenotypic and evolutionary implications of modulating the ERK-MAPK cascade using the dentition as a model

PubMed Central

Marangoni, Pauline; Charles, Cyril; Tafforeau, Paul; Laugel-Haushalter, Virginie; Joo, Adriane; Bloch-Zupan, Agnès; Klein, Ophir D.; Viriot, Laurent

2015-01-01

The question of phenotypic convergence across a signalling pathway has important implications for both developmental and evolutionary biology. The ERK-MAPK cascade is known to play a central role in dental development, but the relative roles of its components remain unknown. Here we investigate the diversity of dental phenotypes in Spry2−/−, Spry4−/−, and Rsk2−/Y mice, including the incidence of extra teeth, which were lost in the mouse lineage 45 million years ago (Ma). In addition, Sprouty-specific anomalies mimic a phenotype that is absent in extant mice but present in mouse ancestors prior to 9 Ma. Although the mutant lines studied display convergent phenotypes, each gene has a specific role in tooth number determination and crown patterning. The similarities found between teeth in fossils and mutants highlight the pivotal role of the ERK-MAPK cascade during the evolution of the dentition in rodents. PMID:26123406

About Kids' Teeth

MedlinePlus

... Kids’ Teeth Teeth Helpful Resources Links About Kids’ Teeth We have two sets of teeth during life: ... usually appeared. Learn about Nutrition Baby Teething Baby Teeth and Teething Baby teeth usually appear when your ...

The Generation Rate of Respirable Dust from Cutting Fiber Cement Siding Using Different Tools

PubMed Central

Qi, Chaolong; Echt, Alan; Gressel, Michael G

2017-01-01

This article describes the evaluation of the generation rate of respirable dust (GAPS, defined as the mass of respirable dust generated per unit linear length cut) from cutting fiber cement siding using different tools in a laboratory testing system. We used an aerodynamic particle sizer spectrometer (APS) to continuously monitor the real-time size distributions of the dust throughout cutting tests when using a variety of tools, and calculated the generation rate of respirable dust for each testing condition using the size distribution data. The test result verifies that power shears provided an almost dust-free operation with a GAPS of 0.006 gram meter−1 (g m−1) at the testing condition. For the same power saws, the cuts using saw blades with more teeth generated more respirable dusts. Using the same blade for all four miter saws tested in this study, a positive linear correlation was found between the saws’ blade rotating speed and its dust generation rate. In addition, a circular saw running at the highest blade rotating speed of 9068 RPM generated the greatest amount of dust. All the miter saws generated less dust in the ‘chopping mode’ than in the ‘chopping and sliding’ mode. For the tested saws, GAPS consistently decreased with the increases of the saw cutting feed rate and the number of board in the stack. All the test results point out that fewer cutting interactions between the saw blade’s teeth and the siding board for a unit linear length of cut tend to result in a lower generation rate of respirable dust. These results may help guide optimal operation in practice and future tool development aimed at minimizing dust generation while producing a satisfactory cut. PMID:28395343

The Generation Rate of Respirable Dust from Cutting Fiber Cement Siding Using Different Tools.

PubMed

Qi, Chaolong; Echt, Alan; Gressel, Michael G

2017-03-01

This article describes the evaluation of the generation rate of respirable dust (GAPS, defined as the mass of respirable dust generated per unit linear length cut) from cutting fiber cement siding using different tools in a laboratory testing system. We used an aerodynamic particle sizer spectrometer (APS) to continuously monitor the real-time size distributions of the dust throughout cutting tests when using a variety of tools, and calculated the generation rate of respirable dust for each testing condition using the size distribution data. The test result verifies that power shears provided an almost dust-free operation with a GAPS of 0.006 g m-1 at the testing condition. For the same power saws, the cuts using saw blades with more teeth generated more respirable dusts. Using the same blade for all four miter saws tested in this study, a positive linear correlation was found between the saws' blade rotating speed and its dust generation rate. In addition, a circular saw running at the highest blade rotating speed of 9068 rpm generated the greatest amount of dust. All the miter saws generated less dust in the 'chopping mode' than in the 'chopping and sliding' mode. For the tested saws, GAPS consistently decreased with the increases of the saw cutting feed rate and the number of board in the stack. All the test results point out that fewer cutting interactions between the saw blade's teeth and the siding board for a unit linear length of cut tend to result in a lower generation rate of respirable dust. These results may help guide optimal operation in practice and future tool development aimed at minimizing dust generation while producing a satisfactory cut. Published by Oxford University Press on behalf of The British Occupational Hygiene Society 2017.

The origin of conodonts and of vertebrate mineralized skeletons

USGS Publications Warehouse

Murdock, Duncan J.E.; Dong, Xi-Ping; Repetski, John E.; Marone, Federica; Stampanoni, Marco; Donoghue, Philip C.J.

2013-01-01

Conodonts are an extinct group of jawless vertebrates whose tooth-like elements are the earliest instance of a mineralized skeleton in the vertebrate lineage, inspiring the ‘inside-out’ hypothesis that teeth evolved independently of the vertebrate dermal skeleton and before the origin of jaws. However, these propositions have been based on evidence from derived euconodonts. Here we test hypotheses of a paraconodont ancestry of euconodonts using synchrotron radiation X-ray tomographic microscopy to characterize and compare the microstructure of morphologically similar euconodont and paraconodont elements. Paraconodonts exhibit a range of grades of structural differentiation, including tissues and a pattern of growth common to euconodont basal bodies. The different grades of structural differentiation exhibited by paraconodonts demonstrate the stepwise acquisition of euconodont characters, resolving debate over the relationship between these two groups. By implication, the putative homology of euconodont crown tissue and vertebrate enamel must be rejected as these tissues have evolved independently and convergently. Thus, the precise ontogenetic, structural and topological similarities between conodont elements and vertebrate odontodes appear to be a remarkable instance of convergence. The last common ancestor of conodonts and jawed vertebrates probably lacked mineralized skeletal tissues. The hypothesis that teeth evolved before jaws and the inside-out hypothesis of dental evolution must be rejected; teeth seem to have evolved through the extension of odontogenic competence from the external dermis to internal epithelium soon after the origin of jaws.

Observations on Middle Stone Age human teeth from Klasies River Main Site, South Africa.

PubMed

Grine, Frederick E

2012-11-01

The human fossils, artefacts and faunal remains from the Middle Stone Age (MSA) deposits of Klasies River Main Site have featured prominently in discussions of the evolution of modern human morphology and the emergence of human behavioral modernity. Nearly 40 human fossils were uncovered by John Wymer's (1967-1968) excavations, and subsequent work by Hilary Deacon (1984-1995) has produced an additional dozen specimens. Many of the latter have been described, but most of the dental remains have been afforded only cursory mention and provisional identification. These specimens are documented here, and questions of individual association among some of the fossils from Wymer's excavations are also addressed. Three teeth provide the first indisputable evidence for juvenile individuals in the deposit. The proportion of juvenile to adult remains in the MSA levels at Klasies is notably lower than in other penecontemporaneous South African coastal MSA sites such as Die Kelders Cave 1 and Blombos Cave, where the proportion of juveniles is seemingly in closer keeping with coastal, geographically proximate Later Stone Age sites such as Oakhurst Shelter and Matjes River Cave. The sizes of most of the recently identified human teeth from Klasies seem to affirm at least one arguable aspect of morphometric modernity in the MSA at this site in the form of a tendency for tooth size reduction. Copyright © 2012 Elsevier Ltd. All rights reserved.

The first modern Europeans.

PubMed

Benazzi, Stefano

2012-01-01

The discovery of new human fossil remains is one of the most obvious ways to improve our understanding of the dynamics of human evolution. The reanalysis of existing fossils using newer methods is also crucial, and may lead to a reconsideration of the biological and taxonomical status of some specimens, and improve our understanding of highly debated periods in human prehistory. This is particularly true for those remains that have previously been studied using traditional approaches, with only morphological descriptions and standard calliper measurements available. My own interest in the Uluzzian, and its associated human remains grew from my interest in applying recently developed analytical techniques to quantify morphological variation. Discovered more than 40 years ago, the two deciduous molars from Grotta del Cavallo (Apulia, Italy) are the only human remains associated with the Uluzzian culture (one of the main three European "transitional" cultures). These teeth were previously attributed to Neanderthals. This attribution contributed to a consensus view that the Uluzzian, with its associated ornament and tool complexes, was produced by Neanderthals. A reassessment of these deciduous teeth by means of digital morphometric analysis revealed that these remains belong to anatomically modern humans (AMHs). This finding contradicts previous assumptions and suggests that modern humans, and not Neanderthals, created the Uluzzian culture. Of equal importance, new chronometric analyses date these dental remains to 43,000-45,000 cal BP. Thus, the teeth from Grotta del Cavallo represent the oldest European AMH currently known.

Spatially restricted dental regeneration drives pufferfish beak development

PubMed Central

Thiery, Alexandre P.; Shono, Takanori; Kurokawa, Daisuke; Britz, Ralf; Johanson, Zerina

2017-01-01

Vertebrate dentitions are extraordinarily diverse in both morphology and regenerative capacity. The teleost order Tetraodontiformes exhibits an exceptional array of novel dental morphologies, epitomized by constrained beak-like dentitions in several families, i.e., porcupinefishes, three-toothed pufferfishes, ocean sunfishes, and pufferfishes. Modification of tooth replacement within these groups leads to the progressive accumulation of tooth generations, underlying the structure of their beaks. We focus on the dentition of the pufferfish (Tetraodontidae) because of its distinct dental morphology. This complex dentition develops as a result of (i) a reduction in the number of tooth positions from seven to one per quadrant during the transition from first to second tooth generations and (ii) a dramatic shift in tooth morphogenesis following the development of the first-generation teeth, leading to the elongation of dental units along the jaw. Gene expression and 1,1′-Dioctadecyl-3,3,3′,3′-tetramethylindocarbocyanine perchlorate (DiI) lineage tracing reveal a putative dental epithelial progenitor niche, suggesting a highly conserved mechanism for tooth regeneration despite the development of a unique dentition. MicroCT analysis reveals restricted labial openings in the beak, through which the dental epithelium (lamina) invades the cavity of the highly mineralized beak. Reduction in the number of replacement tooth positions coincides with the development of only four labial openings in the pufferfish beak, restricting connection of the oral epithelium to the dental cavity. Our data suggest the spatial restriction of dental regeneration, coupled with the unique extension of the replacement dental units throughout the jaw, are primary contributors to the evolution and development of this unique beak-like dentition. PMID:28507130

Piscivory in the feathered dinosaur Microraptor.

PubMed

Xing, Lida; Persons, W Scott; Bell, Phil R; Xu, Xing; Zhang, Jianping; Miyashita, Tetsuto; Wang, Fengping; Currie, Philip J

2013-08-01

The largest specimen of the four-winged dromaeosaurid dinosaur Microraptor gui includes preserved gut contents. Previous reports of gut contents and considerations of functional morphology have indicated that Microraptor hunted in an arboreal environment. The new specimen demonstrates that this was not strictly the case, and offers unique insights into the ecology of nonavian dinosaurs early in the evolution of flight. The preserved gut contents are composed of teleost fish remains. Several morphological adaptations of Microraptor are identified as consistent with a partially piscivorous diet, including dentition with reduced serrations and forward projecting teeth on the anterior of the dentary. The feeding habits of Microraptor can now be understood better than that of any other carnivorous nonavian dinosaur, and Microraptor appears to have been an opportunistic and generalist feeder, able to exploit the most common prey in both the arboreal and aquatic microhabitats of the Early Cretaceous Jehol ecosystem. © 2013 The Author(s). Evolution © 2013 The Society for the Study of Evolution.

Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur.

PubMed

Liu, Min; Reed, David A; Cecchini, Giancarlo M; Lu, Xuanyu; Ganjawalla, Karan; Gonzales, Carol S; Monahan, Richard; Luan, Xianghong; Diekwisch, Thomas G H

2016-01-01

Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here, we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids vs. snakes: (i) the orientation of replacement teeth compared to the major tooth axis, (ii) the occurrence of resorption pits, and (iii) the mode of tooth implantation/attachment to the tooth bearing element (TBE). The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as Heloderma. In conjunction with the presence of resorption pits and the evidence for pseudothecodont tooth implantation, the tooth eruption and implantation characters described in the present study either place mosasaurs among the varanoids or suggest convergent evolution mechanisms between both clades, with mosasaurs evolving somewhat independently from a common varanoid ancestor.

Varanoid Tooth Eruption and Implantation Modes in a Late Cretaceous Mosasaur

PubMed Central

Liu, Min; Reed, David A.; Cecchini, Giancarlo M.; Lu, Xuanyu; Ganjawalla, Karan; Gonzales, Carol S.; Monahan, Richard; Luan, Xianghong

2016-01-01

Erupting teeth are some of the oldest witnesses of developmental processes in the vertebrate fossil record and provide an important resource for vertebrate cladistics. Here, we have examined a mosasaur jaw fragment from central Texas using ultrathin ground section histology and 3D tomographic imaging to assess features critical for the cladistic placement of mosasaurs among varanoids vs. snakes: (i) the orientation of replacement teeth compared to the major tooth axis, (ii) the occurrence of resorption pits, and (iii) the mode of tooth implantation/attachment to the tooth bearing element (TBE). The replacement tooth studied here developed in an inclined position slightly distal of the deciduous parent tooth, similar to another varanoid squamate, the Gila monster Heloderma suspectum. Ground sections and tomographs also demonstrated that the replacement tooth attachment apparatus was entirely intact and that there was no evidence of mechanical deformation. Sections and tomographs further illustrated that the replacement tooth was located within a bony crypt and the inclination of the crypt matched the inclination of the replacement tooth. These preparations also revealed the presence of a resorption pit within the boundaries of the deciduous tooth that surrounded the developing replacement tooth. This finding suggests that developing mosasaur teeth developed within the walls of resorption pits similar to varanoid tooth germs and unlike developing snake teeth which are surrounded by fibrous connective tissue integuments. Finally, mosasaurs featured pseudo-thecodont tooth implantation with teeth anchored within a socket of mineralized tissue by means of a mineralized periodontal ligament. Together, these data indicate that the moderate inclination of the erupting mosasaur tooth studied here is neither a result of postmortem displacement nor a character representative of snakes, but rather a shared character between Mosasaurs and other varanoids such as Heloderma. In conjunction with the presence of resorption pits and the evidence for pseudothecodont tooth implantation, the tooth eruption and implantation characters described in the present study either place mosasaurs among the varanoids or suggest convergent evolution mechanisms between both clades, with mosasaurs evolving somewhat independently from a common varanoid ancestor. PMID:27242535

Biometric ratio in estimating widths of maxillary anterior teeth derived after correlating anthropometric measurements with dental measurements.

PubMed

Kini, Ashwini Y; Angadi, Gangadhar S

2013-06-01

To correlate dental measurements i.e. combined mesiodistal width of six maxillary anterior teeth with facial measurements i.e. inner canthal distance, interpupillary distance and intercommissural width and acquire a biometric ratio to serve as a preliminary guide in selection of the maxillary anterior teeth. In the absence of pre-extraction records, the resultant denture can lead to patient dissatisfaction towards the aesthetic appeal of their dentures. The maxillary anterior teeth play a pivotal role in denture aesthetics. Various techniques and biometric ratios have been described in literature for selection of the maxillary anteriors. This study derives a biometric ratio for the same, obtained after correlating anthropometric measurements with dental measurements. Two standardized digital photographs of the face were generated; one, when the facial muscles were relaxed and the other, when the subject was smiling; thereby, revealing the maxillary anterior teeth upto the canine tip. Inner canthal distance, interpupillary distance, intercommissural distance, distance between the tips of the maxillary canines and distance between the distal surfaces of the canines were measured. On the cast, the distance between tips of maxillary canines and distance between distal surfaces of maxillary canines were noted. The data was analysed using Spearman's rank correlation coefficient. A high correlation was found between the intercommissural measurement with distance between the tips of the canines on the photograph and between the tips of the canines on the cast with the interpupillary distance, giving a biometric ratio of 1:1.35 and 1:1.41 respectively. The least correlation was between the inner canthal distance and the tips of the canines measured on the photograph. Extra oral anthropometric measurements of the interpupillary distances and the intercommissural distances with the help of standardised photographs can help us determine the combined widths of the anterior teeth accurately, thus aiding their selection in the absence of pre-extraction records. © 2012 John Wiley & Sons A/S and The Gerodontology Society. Published by John Wiley & Sons Ltd.

Terahertz pulsed imaging study of dental caries

NASA Astrophysics Data System (ADS)

Karagoz, Burcu; Altan, Hakan; Kamburoglu, Kıvanç

2015-07-01

Current diagnostic techniques in dentistry rely predominantly on X-rays to monitor dental caries. Terahertz Pulsed Imaging (TPI) has great potential for medical applications since it is a nondestructive imaging method. It does not cause any ionization hazard on biological samples due to low energy of THz radiation. Even though it is strongly absorbed by water which exhibits very unique chemical and physical properties that contribute to strong interaction with THz radiation, teeth can still be investigated in three dimensions. Recent investigations suggest that this method can be used in the early identification of dental diseases and imperfections in the tooth structure without the hazards of using techniques which rely on x-rays. We constructed a continuous wave (CW) and time-domain reflection mode raster scan THz imaging system that enables us to investigate various teeth samples in two or three dimensions. The samples comprised of either slices of individual tooth samples or rows of teeth embedded in wax, and the imaging was done by scanning the sample across the focus of the THz beam. 2D images were generated by acquiring the intensity of the THz radiation at each pixel, while 3D images were generated by collecting the amplitude of the reflected signal at each pixel. After analyzing the measurements in both the spatial and frequency domains, the results suggest that the THz pulse is sensitive to variations in the structure of the samples that suggest that this method can be useful in detecting the presence of caries.

Malocclusion of teeth

MedlinePlus

Crowded teeth; Misaligned teeth; Crossbite; Overbite; Underbite; Open bite ... Occlusion refers to the alignment of teeth and the way that the upper and lower teeth fit together (bite). The upper teeth should fit slightly over the lower teeth. ...

Dietary adaptions in the ultrastructure of dinosaur dentine.

PubMed

Brink, Kirstin S; Chen, Yu-Cheng; Wu, Ya-Na; Liu, Wei-Min; Shieh, Dar-Bin; Huang, Timothy D; Sun, Chi-Kuang; Reisz, Robert R

2016-12-01

Teeth are key to understanding the feeding ecology of both extant and extinct vertebrates. Recent studies have highlighted the previously unrecognized complexity of dinosaur dentitions and how specific tooth tissues and tooth shapes differ between taxa with different diets. However, it is unknown how the ultrastructure of these tooth tissues contributes to the differences in feeding style between taxa. In this study, we use third harmonic generation microscopy and scanning electron microscopy to examine the ultrastructure of the dentine in herbivorous and carnivorous dinosaurs to understand how the structure of this tissue contributes to the overall utility of the tooth. Morphometric analyses of dentinal tubule diameter, density and branching rates reveal a strong signal for dietary preferences, with herbivorous saurischian and ornithischian dinosaurs consistently having higher dentinal tubule density than their carnivorous relatives. We hypothesize that this relates to the hardness of the dentine, where herbivorous taxa have dentine that is more resistant to breakage and wear at the dentine-enamel junction than carnivorous taxa. This study advocates the detailed study of dentine and the use of advanced microscopy techniques to understand the evolution of dentition and feeding ecology in extinct vertebrates. © 2016 The Author(s).

Holes in teeth - Dental caries in Neolithic and Early Bronze Age populations in Central Germany.

PubMed

Nicklisch, Nicole; Ganslmeier, Robert; Siebert, Angelina; Friederich, Susanne; Meller, Harald; Alt, Kurt W

2016-01-01

This study provides diachronic insight into the epidemiology of carious defects in teeth of Neolithic and Early Bronze Age populations in Central Germany over a period of 4000 years. The data were retrieved from skeletal remains uncovered at 21 sites throughout the Middle Elbe-Saale region (MES), comprising a total of 494 individuals with preserved teeth. The data generated were examined for age- and sex-related differences in order to gain information about the dietary habits and socio-economic structures of the period with the goal of identifying potential diachronic changes. The results indicated that dietary habits changed over the course of the Neolithic period: the prevalence of caries significantly decreased between the Early and Late Neolithic. The adults from the Early Neolithic sample, particularly those from the LBK bore the highest rate of caries. This highlights the essential importance of cereals in the diet of the early farmers in the Middle Elbe-Saale region. As time went on, meat and dairy products became more and more important, which had a positive impact on dental health. The data also show sex-specific differences: women were more often affected by caries than men and female jaws also generally exhibited greater numbers of carious teeth than their male counterparts. Dental health is a reflection of both biological factors and of economic and sociocultural structures. Copyright © 2015 Elsevier GmbH. All rights reserved.

Efficient digitalization method for dental restorations using micro-CT data

NASA Astrophysics Data System (ADS)

Kim, Changhwan; Baek, Seung Hoon; Lee, Taewon; Go, Jonggun; Kim, Sun Young; Cho, Seungryong

2017-03-01

The objective of this study was to demonstrate the feasibility of using micro-CT scan of dental impressions for fabricating dental restorations and to compare the dimensional accuracy of dental models generated from various methods. The key idea of the proposed protocol is that dental impression of patients can be accurately digitized by micro-CT scan and that one can make digital cast model from micro-CT data directly. As air regions of the micro-CT scan data of dental impression are equivalent to the real teeth and surrounding structures, one can segment the air regions and fabricate digital cast model in the STL format out of them. The proposed method was validated by a phantom study using a typodont with prepared teeth. Actual measurement and deviation map analysis were performed after acquiring digital cast models for each restoration methods. Comparisons of the milled restorations were also performed by placing them on the prepared teeth of typodont. The results demonstrated that an efficient fabrication of precise dental restoration is achievable by use of the proposed method.

Photo-elastic stress analysis of initial alignment archwires.

PubMed

Badran, Serene A; Orr, John F; Stevenson, Mike; Burden, Donald J

2003-04-01

Photo-elastic models replicating a lower arch with a moderate degree of lower incisor crowding and a palatally displaced maxillary canine were used to evaluate the stresses transmitted to the roots of the teeth by initial alignment archwires. Six initial alignment archwires were compared, two multi-strand stainless steel wires, two non-super-elastic (stabilized martensitic form) nickel titanium wires, and two stress-induced super-elastic (austenitic active) nickel titanium wires. Three specimens of each archwire type were tested. Analysis of the photo-elastic fringe patterns, in the medium supporting the teeth, revealed that the non-super-elastic nickel titanium archwires produced the highest shear stresses (P = 0.001). However, the shear stresses generated by the super-elastic alignment archwires and the multi-strand stainless steel archwires were very similar (P = 1.00). These results show that even in situations where large deflections of initial alignment archwires are required, super-elastic archwires do not appear to have any marked advantage over multi-strand stainless steel alignment archwires in terms of the stresses transferred to the roots of the teeth.

[Primary and secondary prevention procedures of temporo-mandibular joint disease in the evolutive age].

PubMed

Ciavarella, D; Mastrovincenzo, M; Sabatucci, A; Campisi, G; Di Cosola, M; Suriano, M; Lo Muzio, L

2009-02-01

In the last years prevention of temporomandiboular joint (TMJ) disease had acquired great importance. According to the neuro-occlusal rehabilitation (RNO) it is possible to say that TMJ disease starts since first years of life. So it is important both for dentist and for pediatric know what are the conditions and the atypical functions which predispose to this pathology. The aim of this work was to show how it is possible to intercept since primary teeth and the correct norms of primary and secondary prevention.

Positive Selection Linked with Generation of Novel Mammalian Dentition Patterns.

PubMed

Machado, João Paulo; Philip, Siby; Maldonado, Emanuel; O'Brien, Stephen J; Johnson, Warren E; Antunes, Agostinho

2016-09-11

A diverse group of genes are involved in the tooth development of mammals. Several studies, focused mainly on mice and rats, have provided a detailed depiction of the processes coordinating tooth formation and shape. Here we surveyed 236 tooth-associated genes in 39 mammalian genomes and tested for signatures of selection to assess patterns of molecular adaptation in genes regulating mammalian dentition. Of the 236 genes, 31 (∼13.1%) showed strong signatures of positive selection that may be responsible for the phenotypic diversity observed in mammalian dentition. Mammalian-specific tooth-associated genes had accelerated mutation rates compared with older genes found across all vertebrates. More recently evolved genes had fewer interactions (either genetic or physical), were associated with fewer Gene Ontology terms and had faster evolutionary rates compared with older genes. The introns of these positively selected genes also exhibited accelerated evolutionary rates, which may reflect additional adaptive pressure in the intronic regions that are associated with regulatory processes that influence tooth-gene networks. The positively selected genes were mainly involved in processes like mineralization and structural organization of tooth specific tissues such as enamel and dentin. Of the 236 analyzed genes, 12 mammalian-specific genes (younger genes) provided insights on diversification of mammalian teeth as they have higher evolutionary rates and exhibit different expression profiles compared with older genes. Our results suggest that the evolution and development of mammalian dentition occurred in part through positive selection acting on genes that previously had other functions. © The Author(s) 2016. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Differential Effects of Fibromodulin Deficiency on Mouse Mandibular Bones and Teeth: A Micro-CT Time Course Study

PubMed Central

Goldberg, Michel; Marchadier, Arnaud; Vidal, Catherine; Harichane, Yassine; Kamoun-Goldrat, Agnès; Kellermann, Odile; Kilts, Tina; Young, Marian

2011-01-01

Fibromodulin (Fmod) is a keratan sulfate small leucine-rich proteoglycan which is enriched in bones and teeth. In order to determine its functions on bone and tooth mineralization we characterized the phenotype of Fmod-deficient (Fmod-KO) mice using a new-generation microfocus computerized tomography system (micro-CT) and software allowing advanced visualization of 3-D data. Three-week-old and 10- week-old Fmod-KO mandibles and teeth were compared with those of age-matched wild-type (WT) mice. In both young and mature mice the Fmod-KO mandibles were hypomineralized, especially the posterior (proximal) part of the mandible as it appeared to be the main target of the molecule deficiency whereas less extensive alterations were found in the alveolar bone. In transverse sections, larger marrow spaces were observed in the Fmod-KO mice compared with age-matched young or mature WT mice. Quantitative evaluation of the pulp volume of the first molar and 3-D reconstructions suggested that dentinogenesis was diminished in 3-week-old Fmod-KO teeth. In contrast, increased dentin formation was found in 10-week-old Fmod-KO mice and it was accompanied by a reduced pulp volume. Thus, the differential effects of Fmod deficiency on bones and teeth appear to diverge in adult mice. This may result from the previously reported differences in the molecular weight of Fmod in the 2 tissues or from compensatory mechanisms due to the overexpression of DSP and DMP-1 in the dental pulp of Fmod-KO. It is also possible that a single molecule plays diverging roles in a tissue-specific or region-specific manner. PMID:21597266

Antiquity of Homo sapiens in China.

PubMed

Tiemei, C; Quan, Y; En, W

1994-03-03

Ten years ago a well-preserved skull of an early form of Homo sapiens was unearthed from Pleistocene cave deposits at the Jinniushan site in China. Here we present electron-spin resonance (ESR) and uranium-series dates from five fossil animal teeth collected from the hominid locality. The minimum ESR ages (195-165 kyr) are about 50 kyr younger than the uranium-series dates. Taken together, the results suggest an age of about 200 kyr or older for the Jinniushan skull, making it among the oldest H. sapiens material found in China, and almost as old as some of the latest Chinese H. erectus. This raises the possibility of the coexistence of the two species in China. The morphology of the skull suggests a strong local component of evolution, consonant with the 'multi-regional continuity' model of the evolution of H. sapiens.

A dental perspective on the taxonomic affinity of the Balanica mandible (BH-1).

PubMed

Skinner, Matthew M; de Vries, Dorien; Gunz, Philipp; Kupczik, Kornelius; Klassen, R Paul; Hublin, Jean-Jacques; Roksandic, Mirjana

2016-04-01

The Middle Pleistocene represents a period of critical importance in human evolution, marked by encephalisation and dental reduction, and increasing diversification of temporally and spatially distributed hominin lineages in Africa, Asia and Europe. New specimens, especially from areas less well represented in the fossil record, can inform the debate on morphological changes to the skeleton and teeth and the phylogenetic course of human evolution during this period. The mandible from the cave of Mala Balanica, Serbia has recently been re-dated to at least 400 ka, and its well-preserved dentition presents an excellent opportunity to characterize molar crown morphology at this time period, and re-examine claims for a lack of Neandertal affinities in the specimen. In this study we employ microtomography to image the internal structure of the mandibular molars (focusing on the morphology of the enamel-dentine junction, or EDJ) of the BH-1 specimen and a comparative sample (n = 141) of Homo erectus sensu lato, Homo neanderthalensis, Pleistocene Homo sapiens, and recent H. sapiens. We quantitatively assess EDJ morphology using 3D geometric morphometrics and examine the expression of discrete dental traits at the dentine surface. We also compare third molar enamel thickness in BH-1 to those of H. neanderthalensis and both Pleistocene and recent H. sapiens, and document previously unreported morphology of the BH-1 premolar and molar roots. Our results highlight the reliability of the EDJ surface for classifying hominin taxa, indicate a primitive dental morphology for BH-1 molars, and confirm a general lack of derived Neandertal features for the Balanica individual. The plesiomorphic character of BH-1 is consistent with several competing models of Middle Pleistocene hominin evolution and provides an important regional and temporal example for reconstructing morphological changes in the mandible and teeth during this time period. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sea urchins have teeth? A review of their microstructure, biomineralization, development and mechanical properties

PubMed Central

Stock, Stuart R.

2015-01-01

Sea urchins possess a set of five teeth which are self-sharpening and which continuously replace material lost through abrasion. The continuous replacement dictates that each tooth consists of the range of developmental states from discrete plates in the plumula, the least mineralized and least mature portion, to plates and needle-prisms separated by cellular syncytia at the beginning of the tooth shaft to a highly dense structure at the incisal end. The microstructures and their development are reviewed prior to a discussion of current understanding of the biomineralization processes operating during tooth formation. For example, the mature portions of each tooth consist of single crystal calcite but the early stages of mineral formation (e.g. solid amorphous calcium carbonate, ions in solution) continue to be investigated. The second stage mineral that cements the disparate plates and prisms together has a much higher Mg content than the first stage prisms and needles and allows the tooth to be self-sharpening. Mechanically, the urchin tooth’s calcite performs better than inorganic calcite, and aspects of tooth functionality that are reviewed include the materials properties themselves and the role of the orientations of the plates and prisms relative to the axes of the applied loads. Although the properties and microarchitecture of sea urchin teeth or other mineralized tissues are often described as optimized, this view is inaccurate because these superb solutions to the problem of constructing functional structures are intermediaries not endpoints of evolution. PMID:24437604

Using dental enamel wrinkling to define sauropod tooth morphotypes from the Cañadón Asfalto Formation, Patagonia, Argentina.

PubMed

Holwerda, Femke M; Pol, Diego; Rauhut, Oliver W M

2015-01-01

The early Middle Jurassic is regarded as the period when sauropods diversified and became major components of the terrestrial ecosystems. Not many sites yield sauropod material of this time; however, both cranial and postcranial material of eusauropods have been found in the Cañadón Asfalto Formation (latest Early Jurassic-early Middle Jurassic) in Central Patagonia (Argentina), which may help to shed light on the early evolution of eusauropods. These eusauropod remains include teeth associated with cranial and mandibular material as well as isolated teeth found at different localities. In this study, an assemblage of sauropod teeth from the Cañadón Asfalto Formation found in four different localities in the area of Cerro Condor (Chubut, Argentina) is used as a mean of assessing sauropod species diversity at these sites. By using dental enamel wrinkling, primarily based on the shape and orientation of grooves and crests of this wrinkling, we define and describe three different morphotypes. With the exception of one taxon, for which no cranial material is currently known, these morphotypes match the local eusauropod diversity as assessed based on postcranial material. Morphotype I is tentatively assigned to Patagosaurus, whereas morphotypes II and III correspond to new taxa, which are also distinguished by associated postcranial material. This study thus shows that enamel wrinkling can be used as a tool in assessing sauropod diversity.

Using Dental Enamel Wrinkling to Define Sauropod Tooth Morphotypes from the Cañadón Asfalto Formation, Patagonia, Argentina

PubMed Central

Holwerda, Femke M.; Pol, Diego; Rauhut, Oliver W. M.

2015-01-01

The early Middle Jurassic is regarded as the period when sauropods diversified and became major components of the terrestrial ecosystems. Not many sites yield sauropod material of this time; however, both cranial and postcranial material of eusauropods have been found in the Cañadón Asfalto Formation (latest Early Jurassic–early Middle Jurassic) in Central Patagonia (Argentina), which may help to shed light on the early evolution of eusauropods. These eusauropod remains include teeth associated with cranial and mandibular material as well as isolated teeth found at different localities. In this study, an assemblage of sauropod teeth from the Cañadón Asfalto Formation found in four different localities in the area of Cerro Condor (Chubut, Argentina) is used as a mean of assessing sauropod species diversity at these sites. By using dental enamel wrinkling, primarily based on the shape and orientation of grooves and crests of this wrinkling, we define and describe three different morphotypes. With the exception of one taxon, for which no cranial material is currently known, these morphotypes match the local eusauropod diversity as assessed based on postcranial material. Morphotype I is tentatively assigned to Patagosaurus, whereas morphotypes II and III correspond to new taxa, which are also distinguished by associated postcranial material. This study thus shows that enamel wrinkling can be used as a tool in assessing sauropod diversity. PMID:25692466

Sea urchins have teeth? A review of their microstructure, biomineralization, development and mechanical properties.

PubMed

Stock, Stuart R

2014-01-01

Sea urchins possess a set of five teeth which are self-sharpening and which continuously replace material lost through abrasion. The continuous replacement dictates that each tooth consists of the range of developmental states from discrete plates in the plumula, the least mineralized and least mature portion, to plates and needle-prisms separated by cellular syncytia at the beginning of the tooth shaft to a highly dense structure at the incisal end. The microstructures and their development are reviewed prior to a discussion of current understanding of the biomineralization processes operating during tooth formation. For example, the mature portions of each tooth consist of single crystal calcite but the early stages of mineral formation (e.g. solid amorphous calcium carbonate, ions in solution) continue to be investigated. The second stage mineral that cements the disparate plates and prisms together has a much higher Mg content than the first stage prisms and needles and allows the tooth to be self-sharpening. Mechanically, the urchin tooth's calcite performs better than inorganic calcite, and aspects of tooth functionality that are reviewed include the materials properties themselves and the role of the orientations of the plates and prisms relative to the axes of the applied loads. Although the properties and microarchitecture of sea urchin teeth or other mineralized tissues are often described as optimized, this view is inaccurate because these superb solutions to the problem of constructing functional structures are intermediaries not endpoints of evolution.

Making teeth to order: conserved genes reveal an ancient molecular pattern in paddlefish (Actinopterygii)

PubMed Central

Smith, Moya M.; Johanson, Zerina; Butts, Thomas; Ericsson, Rolf; Modrell, Melinda; Tulenko, Frank J.; Davis, Marcus C.; Fraser, Gareth J.

2015-01-01

Ray-finned fishes (Actinopterygii) are the dominant vertebrate group today (+30 000 species, predominantly teleosts), with great morphological diversity, including their dentitions. How dental morphological variation evolved is best addressed by considering a range of taxa across actinopterygian phylogeny; here we examine the dentition of Polyodon spathula (American paddlefish), assigned to the basal group Acipenseriformes. Although teeth are present and functional in young individuals of Polyodon, they are completely absent in adults. Our current understanding of developmental genes operating in the dentition is primarily restricted to teleosts; we show that shh and bmp4, as highly conserved epithelial and mesenchymal genes for gnathostome tooth development, are similarly expressed at Polyodon tooth loci, thus extending this conserved developmental pattern within the Actinopterygii. These genes map spatio-temporal tooth initiation in Polyodon larvae and provide new data in both oral and pharyngeal tooth sites. Variation in cellular intensity of shh maps timing of tooth morphogenesis, revealing a second odontogenic wave as alternate sites within tooth rows, a dental pattern also present in more derived actinopterygians. Developmental timing for each tooth field in Polyodon follows a gradient, from rostral to caudal and ventral to dorsal, repeated during subsequent loss of teeth. The transitory Polyodon dentition is modified by cessation of tooth addition and loss. As such, Polyodon represents a basal actinopterygian model for the evolution of developmental novelty: initial conservation, followed by tooth loss, accommodating the adult trophic modification to filter-feeding. PMID:25788604

Cerium Anomalies in Fossil Fish Teeth Reveal Changes in Bottom Water Oxygenation

NASA Astrophysics Data System (ADS)

Chun, C. O.; Scher, H. D.; Delaney, M. L.

2007-12-01

Shale-normalized rare earths and yttrium (REY) concentrations of fossil fish teeth in deep sea sediments display prominent negative cerium (Ce) anomalies and positive yttrium (Y) anomalies. These features are ultimately inherited from seawater and strongly indicate that fossil fish teeth preserve a seawater REY signature. In seawater, Ce+3 is oxidized to Ce+4, and Ce becomes depleted relative to the other REY's as it partitions into other phases (e.g., ferromanganese oxyhydroxides). The magnitude of Ce depletion in a water mass is thus related to its oxygen content. We hypothesize that changes in the oxygenation of bottom waters may be revealed by examining downcore variability in the magnitude of the Ce anomaly of fossil fish teeth. To test this hypothesis, REY concentrations were measured on samples of cleaned fossil fish teeth recovered from the late Paleogene to early Eocene sections of Ocean Drilling Program (ODP) Sites 1262 and 1263 (lower and upper Walvis Ridge, ODP Leg 208, South Atlantic Ocean). These sites are vertically offset (early Eocene paleodepths were 3700 and 1700 meters, respectively) and have been extensively studied to characterize the oceanic response to the Paleocene/Eocene Thermal Maximum (PETM). Manganese enrichment factors (Mn EF) determined from total digestions of samples from these sites reveal abrupt changes in the oxygenation of bottom waters across the PETM interval. Mn EF's decrease to crustal values (~1) during the PETM, which reflects the reduction of Mn oxides as bottom water oxygen levels were depleted. Mn EF's begin to increase to 6-8 during the 'recovery phase' following the PETM. The Ce anomaly for these samples, Ce/Ce*, was calculated according to the geometric approach reported by Lawrence et al. (2006, Aquatic Geochemistry 12, 39-72), where Ce* represents an interpolation of the expected shale-normalized Ce concentration from near neighbors. In this notation, when Ce/Ce* = 1 no Ce anomaly is present. At upper Walvis Ridge downcore Ce anomalies show a distinct excursion from pre-PETM values between 0.7-0.8 to values ~1.0 during the PETM event. The values return to pre-excursion levels during the recovery phase following the PETM. The results of this study closely follow the evolution of Mn EF's at Walvis Ridge sites. The smallest Ce anomalies (i.e., Ce/Ce* = 1) coincide with Mn EF's of 1, which provide independent evidence for low oxygen levels in the bottom waters bathing these locations. These results confirm the hypothesis that Ce anomalies in fossil fish teeth can be used to assess changes in the oxygenation of bottom waters.

Facial Cosmetic Surgery

MedlinePlus

... find out more. Wisdom Teeth Management Wisdom Teeth Management An impacted wisdom tooth can damage neighboring teeth ... find out more. Wisdom Teeth Management Wisdom Teeth Management An impacted wisdom tooth can damage neighboring teeth ...

Dental Implant Surgery

MedlinePlus

... find out more. Wisdom Teeth Management Wisdom Teeth Management An impacted wisdom tooth can damage neighboring teeth ... find out more. Wisdom Teeth Management Wisdom Teeth Management An impacted wisdom tooth can damage neighboring teeth ...

Your Teeth

MedlinePlus

... Safe Videos for Educators Search English Español Your Teeth KidsHealth / For Kids / Your Teeth What's in this ... help you talk. So let's talk teeth! Tiny Teeth Unlike your heart or brain, your teeth weren' ...

Chewing as a forming application: A viscoplastic damage law in modelling food oral breakdown

NASA Astrophysics Data System (ADS)

Skamniotis, C. G.; Charalambides, M. N.; Elliott, M.

2017-10-01

The first bite mechanical response of a food item resembles compressive forming processes, where a tool is pressed into a workpiece. The present study addresses ongoing interests in the deformations and damage of food products, particularly during the first bite, in relation to their mechanical properties. Uniaxial tension, compression and shear tests on a starch based food reveal stress-strain response and fracture strains strongly dependent on strain rate and stress triaxiality, while damage mechanisms are identified in the form of stress softening. A pressure dependent viscoplastic constitutive law reproduces the behavior with the aid of ABAQUS subroutines, while a ductile damage initiation and evolution framework based on fracture toughness data enables accurate predictions of the product breakdown. The material model is implemented in a Finite Element (FE) chewing model based on digital pet teeth geometry where the first bite of molar teeth against a food item is simulated. The FE force displacement results match the experimental data obtained by a physical replicate of the bite model, lending weight to the approach as a powerful tool in understanding of food breakdown and product development.

Tooth wear: the view of the anthropologist.

PubMed

Kaidonis, John A

2008-03-01

Anthropologists have for many years considered human tooth wear a normal physiological phenomenon where teeth, although worn, remain functional throughout life. Wear was considered pathological only if pulpal exposure or premature tooth loss occurred. In addition, adaptive changes to the stomatognathic system in response to wear have been reported including continual eruption, the widening of the masticatory cycle, remodelling of the temporomandibular joint and the shortening of the dental arches from tooth migration. Comparative studies of many different species have also documented these physiological processes supporting the idea of perpetual change over time. In particular, differential wear between enamel and dentine was considered a physiological process relating to the evolution of the form and function of teeth. Although evidence of attrition and abrasion has been known to exist among hunter-gatherer populations for many thousands of years, the prevalence of erosion in such early populations seems insignificant. In particular, non-carious cervical lesions to date have not been observed within these populations and therefore should be viewed as 'modern-day' pathology. Extrapolating this anthropological perspective to the clinical setting has merits, particularly in the prevention of pre-mature unnecessary treatment.

An unusual method of forensic human identification: use of selfie photographs.

PubMed

Miranda, Geraldo Elias; Freitas, Sílvia Guzella de; Maia, Luiza Valéria de Abreu; Melani, Rodolfo Francisco Haltenhoff

2016-06-01

As with other methods of identification, in forensic odontology, antemortem data are compared with postmortem findings. In the absence of dental documentation, photographs of the smile play an important role in this comparison. As yet, there are no reports of the use of the selfie photograph for identification purposes. Owing to advancements in technology, electronic devices, and social networks, this type of photograph has become increasingly common. This paper describes a case in which selfie photographs were used to identify a carbonized body, by using the smile line and image superimposition. This low-cost, rapid, and easy to analyze technique provides highly reliable results. Nevertheless, there are disadvantages, such as the limited number of teeth that are visible in a photograph, low image quality, possibility of morphological changes in the teeth after the antemortem image was taken, and difficulty of making comparisons depending on the orientation of the photo. In forensic odontology, new methods of identification must be sought to accompany technological evolution, particularly when no traditional methods of comparison, such as clinical record charts or radiographs, are available. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The 'sialo-microbial-dental complex' in oral health and disease.

PubMed

Kaidonis, John; Townsend, Grant

2016-01-01

Biofilms are naturally found in all wet environments including the oral structures of nearly all species. Human oral biofilms have existed since our earliest ancestors and have evolved symbiotically with the dentition over many millennia within a Palaeolithic, hunter-gatherer setting. Irrespective of the plant-animal ratio, it can be argued that the Palaeolithic diet was essentially acidic, and acted as a selective force for much of the evolution of the stomatognathic system. The relationship between saliva, biofilm and teeth, the 'sialo-microbial-dental complex', provides oral health benefits and offers a different perspective to the old dental paradigm that only associated oral biofilms (plaque) with disease (caries). This new paradigm emphasises that oral biofilms are essential for the 'mineral maintenance' of teeth. Oral biofilms provide physical protection from dietary acid and together with bacterial metabolic acids cause the resting pH of the biofilm to fall below neutral. This is then followed by the re-establishment of a neutral environment by chemical interactions mediated by the saliva within the biofilm. Such pH fluctuations are often responsible for the cyclic demineralisation, then remineralisation of teeth, a process necessary for tooth maturation. However, since the advent of farming and especially since the industrial revolution, the increase in consumption of carbohydrates, refined sugars and acidic drinks has changed the ecology of biofilms. Biofilm biodiversity is significantly reduced together with a proliferation of acidogenic and aciduric organisms, tipping the balance of the 'demin-remin' cycle towards net mineral loss and hence caries. In addition, the consumption of acidic drinks in today's societies has removed the protective nature of the biofilm, leading to erosion. Erosion and caries are 'modern-day' diseases and reflect an imbalance within the oral biofilm resulting in the demineralisation of teeth. Copyright © 2015 The Authors. Published by Elsevier GmbH.. All rights reserved.

Comparative evaluation of probing depth and clinical attachment level using a manual probe and Florida probe.

PubMed

Kour, Amandeep; Kumar, Ashish; Puri, Komal; Khatri, Manish; Bansal, Mansi; Gupta, Geeti

2016-01-01

To compare and evaluate the intra- and inter-examiner efficacy and reproducibility of the first-generation manual (Williams) probe and the third-generation Florida probe in terms of measuring pocket probing depth (PD) and clinical attachment level (CAL). Forty subjects/4000 sites were included in this comparative, cross-sectional study. Group- and site-wise categorizations were done. Based on gingival index, PD, and CAL, patients were divided into four groups, i.e., periodontally healthy, gingivitis, mild to moderate periodontitis, and severe periodontitis. Further, based on these parameters, a total of 4000 sites, with 1000 sites in each category randomly selected from these 40 patients, were taken. Full mouth PD and CAL measurements were recorded with two probes, by Examiner 1 and on Ramfjord teeth by Examiner 2. Full mouth and Ramfjord teeth group- and site-wise PD obtained with the manual probe by both the examiners were statistically significantly deeper than that obtained with the Florida probe. The full mouth and Ramfjord teeth mean CAL measurement by Florida probe was higher as compared to manual probe in mild to moderate periodontitis group and sites, whereas in severe periodontitis group and sites, manual probe recorded higher CAL as compared to Florida probe. Mean PD and CAL measurements were deeper with the manual probe as compared to the Florida probe in all the groups and sites, except for the mild-moderate periodontitis group and sites where the CAL measurements with the manual probe were less than the Florida probe. Manual probe was more reproducible and showed less interexaminer variability as compared to the Florida probe.

Is extreme bite performance associated with extreme morphologies in sharks?

PubMed

Huber, Daniel R; Claes, Julien M; Mallefet, Jérôme; Herrel, Anthony

2009-01-01

As top predators in many oceanic communities, sharks are known to eat large prey and are supposedly able to generate high bite forces. This notion has, however, largely gone untested due to the experimental intractability of these animals. For those species that have been investigated, it remains unclear whether their high bite forces are simply a consequence of their large body size or the result of diet-related adaptation. As aquatic poikilotherms, sharks can grow very large, making them ideal subjects with which to investigate the effects of body size on bite force. Relative bite-force capacity is often associated with changes in head shape because taller or wider heads can, for example, accommodate larger jaw muscles. Constraints on bite force in general may also be released by changes in tooth shape. For example, more pointed teeth may allow a predator to penetrate prey more effectively than blunt, pavementlike teeth. Our analyses show that large sharks do not bite hard for their body size, but they generally have larger heads. Head width is the best predictor of bite force across the species included in our study as indicated by a multiple regression model. Contrary to our predictions, sharks with relatively high bite forces for their body size also have relatively more pointed teeth at the front of the tooth row. Moreover, species including hard prey in their diet are characterized by high bite forces and narrow and pointed teeth at the jaw symphysis.

FE analysis of conceptual hybrid composite endodontic post designs in anterior teeth.

PubMed

Gloria, Antonio; Maietta, Saverio; Martorelli, Massimo; Lanzotti, Antonio; Watts, David C; Ausiello, Pietro

2018-04-24

To assess conceptual designs of dental posts consisting of polyetherimide (PEI) reinforced with carbon (C) and glass (G) glass fibers in endodontically treated anterior teeth. 3D tessellated CAD and geometric models of endodontically treated anterior teeth were generated from Micro-CT scan images. Model C-G/PEI composite posts with different Young's moduli were analyzed by Finite Element (FE) methods post A (57.7GPa), post B (31.6GPa), post C (from 57.7 to 9.0GPa in the coronal-apical direction). A load of 50N was applied at 45° to the longitudinal axis of the tooth, acting on the palatal surface of the crown. The maximum principal stress distribution was determined along the post and at the interface between the post and the surrounding structure. Post C, with Young's modulus decreasing from 57.7 to 9.0GPa in the coronal-apical direction, reduced the maximum principal stress distribution in the restored tooth. Post C gave reduced stress and the most uniform stress distribution with no stress concentration, compared to the other C-G/PEI composite posts. The FE analysis confirmed the ability of the functionally graded post to dissipate stress from the coronal to the apical end. Hence actual (physical) C-G/PEI posts could permit optimization of stress distributions in endodontically treated anterior teeth. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.

A giant on the ground: another large-bodied Atractus (Serpentes: Dipsadinae) from Ecuadorian Andes, with comments on the dietary specializations of the goo-eaters snakes.

PubMed

Passos, Paulo; Scanferla, Agustín; Melo-Sampaio, Paulo R; Brito, Jorge; Almendariz, Ana

2018-05-17

Body-size is significantly correlated with the number of vertebrae (pleomerism) in multiple vertebrate lineages, indicating that somitogenesis process is an important factor dictating evolutionary change associated to phyletic allometry and, consequently, species fitness and diversification. However, the role of the evolution of extreme body sizes (dwarfism and gigantism) remains elusive in snakes, mainly with respect to postnatal ontogeny in dietary preferences associated with evolution of gigantism in many lineages. We described herein a new species in the highly diversified and species-rich genus Atractus on the basis of four specimens from the southeastern slopes of the Ecuadorian Andes. The new species is morphologically similar and apparently closely related to two other allopatric giant congeners (A. gigas and A. touzeti), from which it can be distinguished by their distinct dorsal and ventral coloration, the number of supralabial and infralabial scales, the number of maxillary teeth, and relative width of the head. In addition, we discuss on the ontogenetic trajectories hypotheses and dietary specializations related to evolution of gigantism in the goo-eaters genus Atractus.

Design and analysis of new fault-tolerant permanent magnet motors for four-wheel-driving electric vehicles

NASA Astrophysics Data System (ADS)

Liu, Guohai; Gong, Wensheng; Chen, Qian; Jian, Linni; Shen, Yue; Zhao, Wenxiang

2012-04-01

In this paper, a novel in-wheel permanent-magnet (PM) motor for four-wheel-driving electrical vehicles is proposed. It adopts an outer-rotor topology, which can help generate a large drive torque, in order to achieve prominent dynamic performance of the vehicle. Moreover, by adopting single-layer concentrated-windings, fault-tolerant teeth, and the optimal combination of slot and pole numbers, the proposed motor inherently offers negligible electromagnetic coupling between different phase windings, hence, it possesses a fault-tolerant characteristic. Meanwhile, the phase back electromotive force waveforms can be designed to be sinusoidal by employing PMs with a trapezoidal shape, eccentric armature teeth, and unequal tooth widths. The electromagnetic performance is comprehensively investigated and the optimal design is conducted by using the finite-element method.

A comparison of the erosive potential of different beverages in primary and permanent teeth using an in vitro model.

PubMed

Lussi, A; Kohler, N; Zero, D; Schaffner, M; Megert, B

2000-04-01

The aim of this study was to compare the erosive potential of different beverages and foodstuffs in primary and permanent teeth. Sixty primary and 60 permanent human teeth were immersed for 3 min in the solution under study (5 teeth per treatment group). Surface microhardness was measured before and after exposure. Initial (baseline) surface microhardness was lower for primary teeth than for permanent teeth. In both primary and permanent teeth, Sprite showed the highest decrease in surface microhardness, whereas yogurt showed an increase in surface microhardness in the primary teeth. Overall decrease was 27.2 +/- 17.5 KHN (mean +/- SD) for primary and 25.9 +/- 15.6 KHN for permanent teeth. The comparison of the erosive susceptibility in this in vitro model showed that primary teeth were not more susceptible to erosion compared to permanent teeth.

Are different generations of CAD/CAM milling machines capable to produce restorations with similar quality?

PubMed

Roperto, Renato; Assaf, Hussein; Soares-Porto, Thiago; Lang, Lisa; Teich, Sorin

2016-10-01

Different CAD/CAM machines' generation may impact the restoration overall quality. The present study evaluated the marginal fit of CAD/CAM restorations manufactured with different generations of CEREC milling unit systems. Sixteen typodont teeth were divided into two groups (n=8) according to the machine's generation assigned. These are control group (G1): Cerec AC with Bluecam/Cerec 3 milling unit and (G2): Cerec AC with Bluecam/MC XL Premium Package milling unit. Scanning of the preparation were performed and crowns were milled using the Vita Mark II blocks. Blocks were cemented using epoxy glue on the pulpal floor only and finger pressure applied for 1 min. Upon completion of the cementation step, misfits between the restoration and abutment were measured by microphotography and the silicone replica technique using light body silicon material on Mesial (M) and Distal (D) surfaces. Mean and SDs of marginal gaps in micrometers were: G1/M: 94.90 (±38.52), G1/D: 88.53 (±44.87), G2/M: 85.65 (±29.89), G2/D: 95.28 (±28.13). Two-way ANOVA indicated no significant differences among different groups ( P >0.05); surface area ( P >0.05) and the interaction ( P >0.05). Overall, G2 had greater margin gaps than G1, however, without statistical difference ( P >0.05). Difference in milling unit generation did not significantly affect the marginal fit. Marginal gap means were in the range of the clinical acceptance levels for both generations of Cerec milling units, regardless the teeth site area. Key words: CAD/CAM, margin, ceramics.

Mechanical modelling of tooth wear

PubMed Central

Kallonen, Aki

2016-01-01

Different diets wear teeth in different ways and generate distinguishable wear and microwear patterns that have long been the basis of palaeodiet reconstructions. Little experimental research has been performed to study them together. Here, we show that an artificial mechanical masticator, a chewing machine, occluding real horse teeth in continuous simulated chewing (of 100 000 chewing cycles) is capable of replicating microscopic wear features and gross wear on teeth that resemble wear in specimens collected from nature. Simulating pure attrition (chewing without food) and four plant material diets of different abrasives content (at n = 5 tooth pairs per group), we detected differences in microscopic wear features by stereomicroscopy of the chewing surface in the number and quality of pits and scratches that were not always as expected. Using computed tomography scanning in one tooth per diet, absolute wear was quantified as the mean height change after the simulated chewing. Absolute wear increased with diet abrasiveness, originating from phytoliths and grit. In combination, our findings highlight that differences in actual dental tissue loss can occur at similar microwear patterns, cautioning against a direct transformation of microwear results into predictions about diet or tooth wear rate. PMID:27411727

Effective of diode laser on teeth enamel in the teeth whitening treatment

NASA Astrophysics Data System (ADS)

Klunboot, U.; Arayathanitkul, K.; Chitaree, R.; Emarat, N.

2011-12-01

This research purpose is to investigate the changing of teeth color and to study the surface of teeth after treatment by laser diode at different power densities for tooth whitening treatment. In the experiment, human-extracted teeth samples were divided into 7 groups of 6 teeth each. After that laser diode was irradiated to teeth, which were coated by 38% concentration of hydrogen peroxide, during for 20, 30 and 60 seconds at power densities of 10.9 and 52.1 W/cm2. The results of teeth color change were described by the CIEL*a*b* systems and the damage of teeth surface were investigated by scanning electron microscopy (SEM). The results showed that the power density of the laser diode could affect the whiteness of teeth. The high power density caused more luminous teeth than the low power density did, but on the other hand the high power density also caused damage to the teeth surface. Therefore, the laser diode at the low power densities has high efficiency for tooth whitening treatment and it has a potential for other clinical applications.

Comparative Evaluation of Impact Strength of Fragment Bonded Teeth and Intact Teeth: An In Vitro Study

PubMed Central

Venugopal, L; Lakshmi, M Narasimha; Babu, Devatha Ashok; Kiran, V Ravi

2014-01-01

Background: To test and compare the impact strength of fragment bonded teeth with that of intact teeth by using impact testing machine (pendulum type) as a mode of load. Materials and Methods: Forty extracted, maxillary, central incisors selected for this study (20 control group and 20 experimental group). In experimental group, teeth crowns were fractured with a microtome at 2.5 mm from mesioincisal angle cervically, fractured portion is attached to original crown portion with 3 M single bond dentin bonding agent and 3 M Z ‘100’, composite resin. Impact strength of fragment bonded teeth and intact teeth tested with impact testing machine and compared. Results: Mean impact strength of fragment bonded teeth (30.76 KJ/M2 ) is not statistically significant deferent from mean impact strength of intact teeth (31.11 KJ/M2 ). Conclusion: Mean impact strength of fragment bonded teeth is not statistically different with that of intact teeth. Hence, after fracture of teeth if it is restored with fragment reattachment by using 3 M single bond dentin bonding agent and 3 M Z ‘100’ composite resin is having impact strength like that of intact teeth. How to cite the article: Venugopal L, Lakshmi MN, Babu DA, Kiran VR. Comparative evaluation of impact strength of fragment bonded teeth and intact teeth: An in vitro study. J Int Oral Health 2014;6(3):73-6. PMID:25083037

Teething

MedlinePlus

Eruption of primary teeth; Well child care - teething ... 6 and 8 months old. All 20 baby teeth should be in place by the time a ... months old. Some children do not show any teeth until much later than 8 months, but this ...

Chemical Evolution and the Evolutionary Definition of Life.

PubMed

Higgs, Paul G

2017-06-01

Darwinian evolution requires a mechanism for generation of diversity in a population, and selective differences between individuals that influence reproduction. In biology, diversity is generated by mutations and selective differences arise because of the encoded functions of the sequences (e.g., ribozymes or proteins). Here, I draw attention to a process that I will call chemical evolution, in which the diversity is generated by random chemical synthesis instead of (or in addition to) mutation, and selection acts on physicochemical properties, such as hydrolysis, photolysis, solubility, or surface binding. Chemical evolution applies to short oligonucleotides that can be generated by random polymerization, as well as by template-directed replication, and which may be too short to encode a specific function. Chemical evolution is an important stage on the pathway to life, between the stage of "just chemistry" and the stage of full biological evolution. A mathematical model is presented here that illustrates the differences between these three stages. Chemical evolution leads to much larger differences in molecular concentrations than can be achieved by selection without replication. However, chemical evolution is not open-ended, unlike biological evolution. The ability to undergo Darwinian evolution is often considered to be a defining feature of life. Here, I argue that chemical evolution, although Darwinian, does not quite constitute life, and that a good place to put the conceptual boundary between non-life and life is between chemical and biological evolution.

GIS and paleoanthropology: incorporating new approaches from the geospatial sciences in the analysis of primate and human evolution.

PubMed

Anemone, R L; Conroy, G C; Emerson, C W

2011-01-01

The incorporation of research tools and analytical approaches from the geospatial sciences is a welcome trend for the study of primate and human evolution. The use of remote sensing (RS) imagery and geographic information systems (GIS) allows vertebrate paleontologists, paleoanthropologists, and functional morphologists to study fossil localities, landscapes, and individual specimens in new and innovative ways that recognize and analyze the spatial nature of much paleoanthropological data. Whether one is interested in locating and mapping fossiliferous rock units in the field, creating a searchable and georeferenced database to catalog fossil localities and specimens, or studying the functional morphology of fossil teeth, bones, or artifacts, the new geospatial sciences provide an essential element in modern paleoanthropological inquiry. In this article we review recent successful applications of RS and GIS within paleoanthropology and related fields and argue for the importance of these methods for the study of human evolution in the twenty first century. We argue that the time has come for inclusion of geospatial specialists in all interdisciplinary field research in paleoanthropology, and suggest some promising areas of development and application of the methods of geospatial science to the science of human evolution. Copyright © 2011 Wiley Periodicals, Inc.

Generation of vacuum ultraviolet radiation by intracavity high-harmonic generation toward state detection of single trapped ions

NASA Astrophysics Data System (ADS)

Wakui, Kentaro; Hayasaka, Kazuhiro; Ido, Tetsuya

2014-12-01

Vacuum ultraviolet (VUV) radiation around 159 nm is obtained toward direct excitation of a single trapped ion. An efficient fluoride-based VUV output coupler is employed for intracavity high-harmonic generation of a Ti:S oscillator. Using this coupler, where we measured its reflectance to be about 90 %, an average power reaching 6.4 W is coupled out from a modest fundamental power of 650 mW. When a single comb component out of 1.9 10 teeth is resonant to the atomic transition, 100s of fluorescence photons per second will be detectable under a realistic condition.

Pharyngeal teeth of the freshwater drum (Aplodinotus grunniens) a predator of the zebra mussel (Dreissena polymorpha)

USGS Publications Warehouse

French, John R. P.

1997-01-01

The morphology of pharyngeal teeth of freshwater drum (Aplodinotus grunniens) was studied to determine changes that occur during growth of drum that may relate to consumption of zebra mussel (Dreissena polymorpha) by larger fish. Pharyngeal teeth were of three types. Cardiform teeth were replaced by villiform teeth, which were replaced by molariform teeth as the size class of drum increased. Molariform teeth comprised over 85% of total surface area of dentition in fish 265 mm long.

Helical gears with circular arc teeth: Generation, geometry, precision and adjustment to errors, computer aided simulation of conditions of meshing and bearing contact

NASA Technical Reports Server (NTRS)

Litvin, Faydor L.; Tsay, Chung-Biau

1987-01-01

The authors have proposed a method for the generation of circular arc helical gears which is based on the application of standard equipment, worked out all aspects of the geometry of the gears, proposed methods for the computer aided simulation of conditions of meshing and bearing contact, investigated the influence of manufacturing and assembly errors, and proposed methods for the adjustment of gears to these errors. The results of computer aided solutions are illustrated with computer graphics.

Assessment of changes following en-masse retraction with mini-implants anchorage compared to two-step retraction with conventional anchorage in patients with class II division 1 malocclusion: a randomized controlled trial.

PubMed

Al-Sibaie, Salma; Hajeer, Mohammad Y

2014-06-01

No randomized controlled trial has tried to compare treatment outcomes between the sliding en-masse retraction of upper anterior teeth supported by mini-implants and the two-step sliding retraction technique employing conventional anchorage devices. To evaluate skeletal, dental, and soft tissue changes following anterior teeth retraction. Parallel-groups randomized controlled trial on patients with class II division 1 malocclusion treated at the University of Al-Baath Dental School in Hamah, Syria between July 2011 and May 2013. One hundred and thirty-three patients with an upper dentoalveolar protrusion were evaluated and 80 patients fulfilled the inclusion criteria. Randomization was performed using computer-generated tables; allocation was concealed using sequentially numbered opaque and sealed envelopes. Fifty-six participants were analysed (mean age 22.34 ± 4.56 years). They were randomly distributed into two groups with 28 patients in each group (1:1 allocation ratio). Following first premolar extraction, space closure was accomplished using either the en-masse technique with mini-implants or the two-step technique with transpalatal arches (TPAs). The antero-posterior displacements of upper incisal edges and upper first molars were measured on lateral cephalograms at three assessment times. Assessor blinding was employed. A bodily retraction (-4.42 mm; P < 0.001) with a slight intrusion (-1.53 mm; P < 0.001) of the upper anterior teeth was achieved in the mini-implants group, whereas upper anterior teeth retraction was achieved by controlled palatal tipping in the TPA group. When retracting anterior teeth in patients with moderate to severe protrusion, the en-masse retraction based on mini-implants anchorage gave superior results compared to the two-step retraction based on conventional anchorage in terms of speed, dental changes, anchorage loss, and aesthetic outcomes.

Root canals decontamination by coherent photons initiated photoacustic streaming (PIPS) of irrigants: an ex-vivo study

NASA Astrophysics Data System (ADS)

Pedullà, E.; Genovese, C.; Scolaro, C.; Cutroneo, M.; Tempera, G.; Rapisarda, E.; Torrisi, L.

2014-04-01

The aim of this ex vivo study was to assess the antibacterial effectiveness of coherent photon initiated photoacoustic streaming (PIPS) of irrigants using an Er:YAG laser equipped with a newly designed, stripped and tapered, tip in extracted teeth with infected root canals. One hundred-forty-eight single-rooted extracted teeth were prepared using a rotary abrasive instrument providing a root channel with a suitable size. The samples were sterilized and all teeth except ten (negative control group) were inoculated with Enterococcus faecalis and incubated in a CO2 chamber at 37°C for 15 days in Eppendorff tubes filled with trypticase soy broth medium changed every 2 days. Infected teeth were then randomly divided into 4 test groups (n=32 for each): pulsed erbium:YAG laser at non-ablative settings for 30 seconds with sterile bi-distilled water (Group A) or 5% sodium hypochlorite (NaOCl) (Group B); without laser activated sterile bi-distilled water irrigation for 30 seconds (Group C) or 5% NaOCl irrigation for 30 seconds (Group D); the positive control group received no treatment in infected teeth (n=10). Colony-forming units (CFUs) were counted from bacteriologic samples taken before (S1) and after treatment (S2). Data were analyzed by Kruskal-Wallis and post hoc Dunn's multiple comparison tests. CFU counts were significantly lower in groups B and D than in group C (P<0.001). Moreover, there was a significant difference between Group A and C (P<0.001). Group B showed the highest CFU reduction, which was significantly greater than that evident in groups A or C (P<0.001). There were no statistically significant differences between group B and D (P>0.05). None of the four groups predictably generated negative samples. Under the conditions of this ex vivo study, statistically significant difference wasn't found in planktonic bacteria reduction between the laser and NaOCl or NaOCl alone groups.

Histologic Outcomes of Uninfected Human Immature Teeth Treated with Regenerative Endodontics: 2 Case Reports.

PubMed

Nosrat, Ali; Kolahdouzan, Alireza; Hosseini, Farzaneh; Mehrizi, Ehsan A; Verma, Prashant; Torabinejad, Mahmoud

2015-10-01

A growing body of evidence exists showing the possibility of growing vital tissues in the root canal spaces of teeth with necrotic pulps and open apices. However, there is very limited histologic information regarding characteristics of tissues formed in the root canal space of human teeth after regenerative endodontics. The aim of this study was to examine clinically and histologically the outcomes of human immature teeth treated with regenerative endodontics. Two healthy birooted human maxillary first premolar teeth scheduled for extraction were included. Preoperative radiographs confirmed that these teeth had immature apices. Vitality tests showed the presence of vital pulps in these teeth. After receiving consent forms, the teeth were isolated with a rubber dam, and the pulps were completely removed. After the formation of blood clots in the canals, the teeth were covered with mineral trioxide aggregate. Four months later, the teeth were clinically and radiographically evaluated, extracted, and examined histologically. Both patients remained asymptomatic after treatment. Radiographic examination of the teeth showed signs of root development after treatment. Histologic examination of tissues growing into the root canal space of these teeth shows the presence of connective tissue, bone and cementum formation, and thickening of roots. Based on our findings, it appears that when canals of teeth with open apices are treated with regenerative endodontics, tissues of the periodontium grow into the root canals of these teeth. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

In vitro imaging of remaining dentin and pulp chamber by optical coherence tomography: comparison between 850 and 1280 nm

NASA Astrophysics Data System (ADS)

Fonsêca, Déborah D. D.; Kyotoku, Bernardo B. C.; Maia, Ana M. A.; Gomes, Anderson S. L.

2009-03-01

We report the application of optical coherence tomography (OCT) to generate images of the remaining dentin and pulp chamber of in vitro human teeth. Bidimensional images of remaining dentin and of the pulp chamber were obtained parallel to the long axis of the teeth, by two OCT systems operating around 1280 and 850 nm, and compared to tomography images using the i-CAT® Cone Beam Volumetric Tomography system as the gold standard. The results demonstrated the efficacy of the OCT technique; furthermore, the wavelength close to 1280 nm presented greater penetration depth in the dentine than 850 nm, as expected from scattering and absorption coefficients. The OCT technique has great potential to be used on clinical practice, preventing accidental exposure of the pulp and promoting preventive restoration treatment.

The Study of Carious Teeth by Laser-Induced Breakdown Spectroscopy

NASA Astrophysics Data System (ADS)

Hamzaoui, S.; Nouir, R.; Jaidene, N.

2017-03-01

The aim of this work is a multi-component analysis of the element composition of the enamel and carious parts of teeth and the quantification of enamel demineralization using laser-induced breakdown spectroscopy (LIBS). For each tooth the P/Ca ratios of the emission line intensities in the enamel part and those in the carious regions were compared. Since zinc is a trace element, the same procedure was performed for Zn/Ca ratios in the enamel and carious parts. These comparisons showed that the mineral loss from carious lesions occurs at different rates for the studied elements. Calcium has the highest casualty rate. On the other hand, the zinc level diminishes also in the carious region but at a lower rate. The lines were obtained from plume plasma emission generated on the enamel and carious regions.

Enamel mineral concentration in diabetic rodents.

PubMed

Atar, M; Davis, G R; Verry, P; Wong, F S L

2007-12-01

This was to use x-ray microtomography (XMT), to assess the mineral composition and 3-D structure of enamel and bone in the teeth and skulls of diabetic rodents. Three-dimensional images of the skull were reconstructed using computer generated false colour to highlight different levels of mineralization in bone and enamel. These showed that diabetic rodents exhibited more wear in their teeth. Deformities were observed in the alveolar process of the mandible and maxilla. Regions of extensive hypomineralization were found in the calvarial bone of skulls. The maximum mineral concentrations and the time constants for diabetic rodents were similar to the controls. The diabetic mice appeared to have random regions of hypomineralization and one diabetic rat had areas of hypoplasia in the mandibular incisors. Diabetes may have a detrimental influence on the function of ameloblasts in laying down enamel.

The advantage of CT scans and 3D visualizations in the analysis of three child mummies from the Graeco-Roman Period.

PubMed

Villa, Chiara; Davey, Janet; Craig, Pamela J G; Drummer, Olaf H; Lynnerup, Niels

2015-01-01

Three child mummies from the Graeco-Roman Period (332 BCE - c. 395 CE) were examined using CT scans and 3D visualizations generated with Vitrea 2 and MIMICS graphic workstations with the aim of comparing the results with previous X-ray examinations performed by Dawson and Gray in 1968. Although the previous analyses reported that the children had been excerebrated and eviscerated, no evidence of incisions or breaches of the cranial cavity were found; 3D visualizations were generated showing the brain and the internal organs to be in situ. A larger number of skeletal post-mortem damages were identified, such as dislocation of mandible, ribs, and vertebrae, probably suffered at the time of embalming procedure. Different radio-opaque granular particles were observed throughout bodies (internally and externally) and could be explained as presence of natron, used as external desiccating agent by the embalmers, or as adipocerous alteration, a natural alteration of body fat. Age-at-death was estimated using the 3D visualization of the teeth, the state of fusion of the vertebrae and the presence of the secondary centers of the long bones: two mummies died at the age of 4 years ± 12 months, the third one at the age of 6 years ± 24 months. Hyperdontia or polydontia, a dental anomaly, could also be identified in one child using 3D visualizations of the teeth: two supernumerary teeth were found behind the maxillary permanent central incisors which had not been noticed in the Dawson and Gray's X-ray analysis. In conclusion, CT-scan investigations and especially 3D visualizations are important tools in the non-invasive analysis of the mummies and, in this case, provided revised and additional information compared to the only X-ray examination.

Fate of the Molar Dental Lamina in the Monophyodont Mouse

PubMed Central

Dosedělová, Hana; Dumková, Jana; Lesot, Hervé; Glocová, Kristýna; Kunová, Michaela; Tucker, Abigail S.; Veselá, Iva; Krejčí, Pavel; Tichý, František; Hampl, Aleš; Buchtová, Marcela

2015-01-01

The successional dental lamina (SDL) plays an essential role in the development of replacement teeth in diphyodont and polyphyodont animals. A morphologically similar structure, the rudimental successional dental lamina (RSDL), has been described in monophyodont (only one tooth generation) lizards on the lingual side of the developing functional tooth. This rudimentary lamina regresses, which has been proposed to play a role in preventing the formation of future generations of teeth. A similar rudimentary lingual structure has been reported associated with the first molar in the monophyodont mouse, and we show that this structure is common to all murine molars. Intriguingly, a lingual lamina is also observed on the non-replacing molars of other diphyodont mammals (pig and hedgehog), initially appearing very similar to the successional dental lamina on the replacing teeth. We have analyzed the morphological as well as ultrastructural changes that occur during the development and loss of this molar lamina in the mouse, from its initiation at late embryonic stages to its disappearance at postnatal stages. We show that loss appears to be driven by a reduction in cell proliferation, down-regulation of the progenitor marker Sox2, with only a small number of cells undergoing programmed cell death. The lingual lamina was associated with the dental stalk, a short epithelial connection between the tooth germ and the oral epithelium. The dental stalk remained in contact with the oral epithelium throughout tooth development up to eruption when connective tissue and numerous capillaries progressively invaded the dental stalk. The buccal side of the dental stalk underwent keratinisation and became part of the gingival epithelium, while most of the lingual cells underwent programmed cell death and the tissue directly above the erupting tooth was shed into the oral cavity. PMID:26010446

Abnormalities of tooth development in pituitary dwarfism.

PubMed

Kosowicz, J; Rzymski, K

1977-12-01

Roentgenographic studies of the jaws and teeth in a group of forty-eight pituitary dwarfs showed the following abnormalities in the development of the teeth: 1. Delayed shedding of the deciduous teeth. 2. Absence of resorption of the roots of the deciduous teeth at the usual time. 3. Marked delay in eruption of the permanent teeth. 4. Retention of permanent teeth in the maxillary and mandibular shafts. 5. Development of the apical parts of roots of the retained permanent teeth and their growth toward the lower mandibular edge. 6. Displacement of the first molars from the mandibular shaft to rami. 7. Tilting of some of the retained teeth. 8. Small size of the maxilla and mandible with overcrowding of the teeth in these bones. 9. Complete absence of buds of the wisdom teeth, even in patients in the fourth decade of life. 10. Stimulation of development and eruption of the teeth after administration of anabolic drugs. These abnormalities when present in combination depend on growth hormone deficiency since they do not occur in other types of dwarfism.

Histogenesis and disappearance of the teeth of the Mekong giant catfish, Pangasianodon gigas (Teleostei).

PubMed

Kakizawa, Yoshiko; Meenakarn, Wanpen

2003-12-01

Juveniles of the Mekong giant catfish, Pangasianodon gigas (Teleostei), have 3 sorts of tooth-upper and lower jaw teeth, palatal teeth, and pharyngeal teeth--but adults are toothless. To investigate the histogenesis and disappearance of the teeth, we made serial sections of the mouth and teeth of juvenile fish at 10 developmental stages (from ca. 8.5 to ca. 30 cm in total length) and examined them under scanning electron microscope and light microscope. Observations of teeth and surrounding tissues in the serial sections revealed the process of tooth resorption by active odontoclast-like cells. Numbers of jaw and palatal teeth decreased with age. When the fish reached ca. 14 cm in total length, the numbers of functional upper jaw teeth and successional tooth germs decreased rapidly, and the developmental rate of successional tooth germs slowed. When the fish reached ca. 24 cm, no teeth existed in the upper jaw. It is clear that tooth disappearance results from the shedding of functional teeth and the lack of replacement tooth germs.

Intentional replantation of adhesively reattached vertically fractured maxillary single-rooted teeth.

PubMed

Nizam, N; Kaval, M E; Gürlek, Ö; Atila, A; Çalışkan, M K

2016-03-01

To evaluate the clinical outcomes of intentionally replanted maxillary single-rooted teeth with vertical root fractures (VRFs) after being repaired extraorally using 4-methacryloxyethyl trimellitate anhydride/methacrylate-tri-n-butyl borane (4-META/MMA-TBB) resin cement. Twenty-one root filled maxillary single-rooted teeth with VRFs were evaluated. After atraumatic extraction, fractured fragments were adhesively cemented. The teeth were then replanted and splinted to the neighbouring teeth for 2 weeks. Plaque index (PI), gingival index (GI), probing depth (PD) and clinical attachment level (CAL) were assessed at baseline, 6 and 12 months, and radiographic evaluations were made using PAI scores at baseline and 12 months. Mobility was evaluated using periotest values (PTV) at baseline, 1, 3, 6 and 12 months. Replanted teeth, contralateral teeth (control teeth) and adjacent teeth were analysed statistically using repeated measures one-way anova, unpaired t-tests and Wilcoxon matched-pairs signed-rank tests. Two teeth were extracted in the first month after surgery. PI, GI, CAL and PD scores of the replanted teeth were significantly lower at 6 month (P < 0.0001 for all) and 12 month (P < 0.0001 for all) postoperatively when compared to baseline, but the values were not significantly different from those of the control and adjacent teeth. PTV of the test teeth increased significantly (P < 0.0001) after the intervention and decreased to baseline levels by month 12. PTVs were significantly higher (P < 0.05) at baseline, 1, 3 and 6 months in the test teeth when compared with the control teeth, but were not significantly different at month 12. PAI scores of teeth with VRF were significantly lower (P < 0.05) at 12 months compared with baseline. Adhesive cementation and intentional replantation were an effective treatment modality for this group of vertically fractured maxillary single-rooted teeth. The clinical periodontal parameters decrease by month 6, and the mobility returned to the physiological limits of natural teeth 12 months after replantation. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Wear Fast, Die Young: More Worn Teeth and Shorter Lives in Iberian Compared to Scottish Red Deer

PubMed Central

Pérez-Barbería, F. J.; Carranza, J.; Sánchez-Prieto, C.

2015-01-01

Teeth in Cervidae are permanent structures that are not replaceable or repairable; consequently their rate of wear, due to the grinding effect of food and dental attrition, affects their duration and can determine an animal's lifespan. Tooth wear is also a useful indicator of accumulative life energy investment in intake and mastication and their interactions with diet. Little is known regarding how natural and sexual selection operate on dental structures within a species in contrasting environments and how these relate to life history traits to explain differences in population rates of tooth wear and longevity. We hypothesised that populations under harsh environmental conditions should be selected for more hypsodont teeth while sexual selection may maintain similar sex differences within different populations. We investigated the patterns of tooth wear in males and females of Iberian red deer (Cervus elaphus hispanicus) in Southern Spain and Scottish red deer (C. e. scoticus) across Scotland, that occur in very different environments, using 10343 samples from legal hunting activities. We found higher rates of both incisor and molar wear in the Spanish compared to Scottish populations. However, Scottish red deer had larger incisors at emergence than Iberian red deer, whilst molars emerged at a similar size in both populations and sexes. Iberian and Scottish males had earlier tooth depletion than females, in support of a similar sexual selection process in both populations. However, whilst average lifespan for Iberian males was 4 years shorter than that for Iberian females and Scottish males, Scottish males only showed a reduction of 1 year in average lifespan with respect to Scottish females. More worn molars were associated with larger mandibles in both populations, suggesting that higher intake and/or greater investment in food comminution may have favoured increased body growth, before later loss of tooth efficiency due to severe wear. These results illustrate how independent selection in both subspecies, that diverged 11,700 years BP, has resulted in the evolution of different longevity, although sexual selection has maintained a similar pattern of relative sex differences in tooth depletion. This study opens interesting questions on optimal allocation in life history trade-offs and the independent evolution of allopatric populations. PMID:26252380

Wear Fast, Die Young: More Worn Teeth and Shorter Lives in Iberian Compared to Scottish Red Deer.

PubMed

Pérez-Barbería, F J; Carranza, J; Sánchez-Prieto, C

2015-01-01

Teeth in Cervidae are permanent structures that are not replaceable or repairable; consequently their rate of wear, due to the grinding effect of food and dental attrition, affects their duration and can determine an animal's lifespan. Tooth wear is also a useful indicator of accumulative life energy investment in intake and mastication and their interactions with diet. Little is known regarding how natural and sexual selection operate on dental structures within a species in contrasting environments and how these relate to life history traits to explain differences in population rates of tooth wear and longevity. We hypothesised that populations under harsh environmental conditions should be selected for more hypsodont teeth while sexual selection may maintain similar sex differences within different populations. We investigated the patterns of tooth wear in males and females of Iberian red deer (Cervus elaphus hispanicus) in Southern Spain and Scottish red deer (C. e. scoticus) across Scotland, that occur in very different environments, using 10343 samples from legal hunting activities. We found higher rates of both incisor and molar wear in the Spanish compared to Scottish populations. However, Scottish red deer had larger incisors at emergence than Iberian red deer, whilst molars emerged at a similar size in both populations and sexes. Iberian and Scottish males had earlier tooth depletion than females, in support of a similar sexual selection process in both populations. However, whilst average lifespan for Iberian males was 4 years shorter than that for Iberian females and Scottish males, Scottish males only showed a reduction of 1 year in average lifespan with respect to Scottish females. More worn molars were associated with larger mandibles in both populations, suggesting that higher intake and/or greater investment in food comminution may have favoured increased body growth, before later loss of tooth efficiency due to severe wear. These results illustrate how independent selection in both subspecies, that diverged 11,700 years BP, has resulted in the evolution of different longevity, although sexual selection has maintained a similar pattern of relative sex differences in tooth depletion. This study opens interesting questions on optimal allocation in life history trade-offs and the independent evolution of allopatric populations.

Evolution of high tooth replacement rates in sauropod dinosaurs.

PubMed

D'Emic, Michael D; Whitlock, John A; Smith, Kathlyn M; Fisher, Daniel C; Wilson, Jeffrey A

2013-01-01

Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days). Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size), and derived titanosaurs and diplodocoids independently evolved the highest known tooth replacement rates among archosaurs.

Evolution of High Tooth Replacement Rates in Sauropod Dinosaurs

PubMed Central

Smith, Kathlyn M.; Fisher, Daniel C.; Wilson, Jeffrey A.

2013-01-01

Background Tooth replacement rate can be calculated in extinct animals by counting incremental lines of deposition in tooth dentin. Calculating this rate in several taxa allows for the study of the evolution of tooth replacement rate. Sauropod dinosaurs, the largest terrestrial animals that ever evolved, exhibited a diversity of tooth sizes and shapes, but little is known about their tooth replacement rates. Methodology/Principal Findings We present tooth replacement rate, formation time, crown volume, total dentition volume, and enamel thickness for two coexisting but distantly related and morphologically disparate sauropod dinosaurs Camarasaurus and Diplodocus. Individual tooth formation time was determined by counting daily incremental lines in dentin. Tooth replacement rate is calculated as the difference between the number of days recorded in successive replacement teeth. Each tooth family in Camarasaurus has a maximum of three replacement teeth, whereas each Diplodocus tooth family has up to five. Tooth formation times are about 1.7 times longer in Camarasaurus than in Diplodocus (315 vs. 185 days). Average tooth replacement rate in Camarasaurus is about one tooth every 62 days versus about one tooth every 35 days in Diplodocus. Despite slower tooth replacement rates in Camarasaurus, the volumetric rate of Camarasaurus tooth replacement is 10 times faster than in Diplodocus because of its substantially greater tooth volumes. A novel method to estimate replacement rate was developed and applied to several other sauropodomorphs that we were not able to thin section. Conclusions/Significance Differences in tooth replacement rate among sauropodomorphs likely reflect disparate feeding strategies and/or food choices, which would have facilitated the coexistence of these gigantic herbivores in one ecosystem. Early neosauropods are characterized by high tooth replacement rates (despite their large tooth size), and derived titanosaurs and diplodocoids independently evolved the highest known tooth replacement rates among archosaurs. PMID:23874921

Endotoxin content in endodontically involved teeth. 1975.

PubMed

Schein, Benjamin; Schilder, Herbert

2006-04-01

Fluid was aspirated from the root canals of 40 endodontically involved teeth. This fluid was assayed for endotoxin with the limulus lysate test. Pulpless teeth contained greater concentrations of endotoxin than those with vital pulps. Symptomatic teeth also contained more endotoxin than asymptomatic teeth.

Microbiome in the Apical Root Canal System of Teeth with Post-Treatment Apical Periodontitis

PubMed Central

Siqueira, José F.; Antunes, Henrique S.; Rôças, Isabela N.; Rachid, Caio T. C. C.

2016-01-01

Introduction Bacteria present in the apical root canal system are directly involved with the pathogenesis of post-treatment apical periodontitis. This study used a next-generation sequencing approach to identify the bacterial taxa occurring in cryopulverized apical root samples from root canal-treated teeth with post-treatment disease. Methods Apical root specimens obtained during periradicular surgery of ten adequately treated teeth with persistent apical periodontitis were cryogenically ground. DNA was extracted from the powder and the microbiome was characterized on the basis of the V4 hypervariable region of the 16S rRNA gene by using paired-end sequencing on Illumina MiSeq device. Results All samples were positive for the presence of bacterial DNA. Bacterial taxa were mapped to 11 phyla and 103 genera composed by 538 distinct operational taxonomic units (OTUs) at 3% of dissimilarity. Over 85% of the sequences belonged to 4 phyla: Proteobacteria, Firmicutes, Fusobacteria and Actinobacteria. In general, these 4 phyla accounted for approximately 80% of the distinct OTUs found in the apical root samples. Proteobacteria was the most abundant phylum in 6/10 samples. Fourteen genera had representatives identified in all cases. Overall, the genera Fusobacterium and Pseudomonas were the most dominant. Enterococcus was found in 4 cases, always in relatively low abundance. Conclusions This study showed a highly complex bacterial community in the apical root canal system of adequately treated teeth with persistent apical periodontitis. This suggests that this disease is characterized by multispecies bacterial communities and has a heterogeneous etiology, because the community composition largely varied from case to case. PMID:27689802

Three-dimensional measurement of periodontal surface area for quantifying inflammatory burden.

PubMed

Park, Sa-Beom; An, So-Youn; Han, Won-Jeong; Park, Jong-Tae

2017-06-01

Measurement of the root surface area (RSA) is important in periodontal treatment and for the evaluation of periodontal disease as a risk factor for systemic disease. The aim of this study was to measure the RSA at 6 mm below the cementoenamel junction (CEJ) using the Mimics software (Materialise, Leuven, Belgium). We obtained cone-beam computed tomography (CBCT) data from 33 patients who had visited the Department of Oral and Maxillofacial Radiology of Dankook University Dental Hospital. The patients comprised 17 men and 16 women aged from 20 to 35 years, with a mean age of 24.4 years. Only morphologically intact teeth were included in our data. Because the third molars of the maxilla and mandible have a high deformation rate and were absent in some participants, they were not included in our research material. The CBCT data were reconstructed into 3-dimensional (3D) teeth models using the Mimics software, and the RSA at 6 mm below the CEJ was separated and measured using 3-Matic (Materialise). In total, 924 3D teeth models were created, and the area at 6 mm below the CEJ could be isolated in all the models. The area at 6 mm below the CEJ was measured in all teeth from the 33 patients and compared based on sex and position (maxilla vs. mandible). In this study, we demonstrated that it was feasible to generate 3D data and to evaluate RSA values using CBCT and the Mimics software. These results provide deeper insights into the relationship between periodontal inflammatory burden and systemic diseases.

Decellularized Human Dental Pulp as a Scaffold for Regenerative Endodontics.

PubMed

Song, J S; Takimoto, K; Jeon, M; Vadakekalam, J; Ruparel, N B; Diogenes, A

2017-06-01

Teeth undergo postnatal organogenesis relatively late in life and only complete full maturation a few years after the crown first erupts in the oral cavity. At this stage, development can be arrested if the tooth organ is damaged by either trauma or caries. Regenerative endodontic procedures (REPs) are a treatment alternative to conventional root canal treatment for immature teeth. These procedures rely on the transfer of apically positioned stem cells, including stem cells of the apical papilla (SCAP), into the root canal system. Although clinical success has been reported for these procedures, the predictability of expected outcomes and the organization of the newly formed tissues are affected by the lack of an available suitable scaffold that mimics the complexity of the dental pulp extracellular matrix (ECM). In this study, we evaluated 3 methods of decellularization of human dental pulp to be used as a potential autograft scaffold. Tooth slices of human healthy extracted third molars were decellularized by 3 different methods. One of the methods generated the maximum observed decellularization with minimal impact on the ECM composition and organization. Furthermore, recellularization of the scaffold supported the proliferation of SCAP throughout the scaffold with differentiation into odontoblast-like cells near the dentinal walls. Thus, this study reports that human dental pulp from healthy extracted teeth can be successfully decellularized, and the resulting scaffold supports the proliferation and differentiation of SCAP. The future application of this form of an autograft in REPs can fulfill a yet unmet need for a suitable scaffold, potentially improving clinical outcomes and ultimately promoting the survival and function of teeth with otherwise poor prognosis.

Microbiome in the Apical Root Canal System of Teeth with Post-Treatment Apical Periodontitis.

PubMed

Siqueira, José F; Antunes, Henrique S; Rôças, Isabela N; Rachid, Caio T C C; Alves, Flávio R F

Bacteria present in the apical root canal system are directly involved with the pathogenesis of post-treatment apical periodontitis. This study used a next-generation sequencing approach to identify the bacterial taxa occurring in cryopulverized apical root samples from root canal-treated teeth with post-treatment disease. Apical root specimens obtained during periradicular surgery of ten adequately treated teeth with persistent apical periodontitis were cryogenically ground. DNA was extracted from the powder and the microbiome was characterized on the basis of the V4 hypervariable region of the 16S rRNA gene by using paired-end sequencing on Illumina MiSeq device. All samples were positive for the presence of bacterial DNA. Bacterial taxa were mapped to 11 phyla and 103 genera composed by 538 distinct operational taxonomic units (OTUs) at 3% of dissimilarity. Over 85% of the sequences belonged to 4 phyla: Proteobacteria, Firmicutes, Fusobacteria and Actinobacteria. In general, these 4 phyla accounted for approximately 80% of the distinct OTUs found in the apical root samples. Proteobacteria was the most abundant phylum in 6/10 samples. Fourteen genera had representatives identified in all cases. Overall, the genera Fusobacterium and Pseudomonas were the most dominant. Enterococcus was found in 4 cases, always in relatively low abundance. This study showed a highly complex bacterial community in the apical root canal system of adequately treated teeth with persistent apical periodontitis. This suggests that this disease is characterized by multispecies bacterial communities and has a heterogeneous etiology, because the community composition largely varied from case to case.

Two Body Wear of Newly Introduced Nanocomposite Teeth and Cross Linked Four Layered Acrylic Teeth: a Comparitive In Vitro Study.

PubMed

Ilangkumaran, R; Srinivasan, J; Baburajan, K; Balaji, N

2014-12-01

Wear of complete denture teeth results in compromise in denture esthetics and functions. To counteract this problem, artificial teeth with increased wear resistance had been introduced in the market such as nanocomposite teeth. The purpose of this study was to compare the amount of wear between nanocomposite teeth and acrylic teeth. Fifteen specimens were chosen from each group namely the nanocomposite teeth (SR_-PHONARES) and the acrylic teeth (ACRY PLUS). Maxillary premolar was only chosen for testing and the samples were customized according to the specifications of the pin on disc machine. Pin on disc machine is a two body tribometer which quantifies the amount of wear under a specific load and time. Test samples were mounted on to the receptacle of the pin on disc machine and tested under a load of 0.3 kg for 1,000 cycles of rotation against a 600 grit emery paper. The amount of wear is displayed from the digital reading obtained from the pin on disc machine. After statistical analysis, it was found that, the amount of wear is more in four layered acrylic teeth. The p value obtained is 0.002 (<0.005) thus implies that the difference in wear between nanocomposite teeth and acrylic teeth is statistically significant. Though the nanocomposite teeth has less amount of wear than the four layered acrylic teeth, the difference is very less and adds only to a little clinical significance but the cost of the nanocomposite is four times that of the acrylic teeth. Further clinical studies must be performed to confirm our results.

Enamel Thickness before and after Orthodontic Treatment Analysed in Optical Coherence Tomography

PubMed Central

Koprowski, Robert; Safranow, Krzysztof; Woźniak, Krzysztof

2017-01-01

Despite the continuous development of materials and techniques of adhesive bonding, the basic procedure remains relatively constant. The technique is based on three components: etching substance, adhesive system, and composite material. The use of etchants during bonding orthodontic brackets carries the risk of damage to the enamel. Therefore, the article examines the effect of the manner of enamel etching on its thickness before and after orthodontic treatment. The study was carried out in vitro on a group of 80 teeth. It was divided into two subgroups of 40 teeth each. The procedure of enamel etching was performed under laboratory conditions. In the first subgroup, the classic method of enamel etching and the fifth-generation bonding system were used. In the second subgroup, the seventh-generation (self-etching) bonding system was used. In both groups, metal orthodontic brackets were fixed and the enamel was cleaned with a cutter fixed on the micromotor after their removal. Before and after the treatment, two-dimensional optical coherence tomography scans were performed. The enamel thickness was assessed on the two-dimensional scans. The average enamel thickness in both subgroups was not statistically significant. PMID:28243604

The study of barium concentration in deciduous teeth, impacted teeth, and facial bones of Polish residents.

PubMed

Fischer, Agnieszka; Malara, Piotr; Wiechuła, Danuta

2014-10-01

The study determines the concentration of Ba in mineralized tissues of deciduous teeth, permanent impacted teeth, and facial bones. The study covers the population of children and adults (aged 6-78) living in an industrial area of Poland. Teeth were analyzed in whole, with no division into dentine and enamel. Facial bones and teeth were subjected to the following preparation: washing, drying, grinding in a porcelain mortar, sample weighing (about 0.2 g), and microwave mineralization with spectrally pure nitric acid. The aim of the study was to determinate the concentration of Ba in deciduous teeth, impacted permanent teeth, and facial bones. The concentration of barium in samples was determined over the ICP OES method. The Ba concentration in the tested bone tissues amounted to 2.2-15.5 μg/g (6.6 μg/g ± 3.9). The highest concentration of Ba was present in deciduous teeth (10.5 μg/g), followed by facial bones (5.2 μg/g), and impacted teeth (4.3 μg/g) (ANOVA Kruskal-Wallis rank test, p = 0.0002). In bone tissue and impacted teeth, Ba concentration increased with age. In deciduous teeth, the level of Ba decreased with children's age.

Oral health status in a population in Northern Norway.

PubMed

Norheim, P W

1979-01-01

Information concerning oral health status was obtained through a clinical and radiographic examination of 297 persons aged 20--69 years out of a population of 358 persons living in a coastal community in Northern Norway. The oral health was generally poor. 71% had one or more remaining teeth and the dentulous persons had a mean number of 18 remaining teeth. The mean number of DMF teeth was 27,3 while the mean number of decayed teeth was 4,9 and filled teeth 12,0 giving a percent of decayed and filled teeth of 27 and 65 respectively. Only every fourth dentulous person had one or more crowns and/or bridge units and 4% of all teeth had been treated endodontically. 41% of the teeth had visible plaque and 56% of the teeth had one or more gingival margins bleeding after gentle probing. One fourth of all teeth had gingival pockets exceeding 3 mm and 17% of all teeth showed a bone loss of 20% or more. The number of remaining teeth decreased with increasing age and decreasing income and/or social class. In general, women, young people and people with a high socioeconomic status had less caries, better oral hygiene and periodontal condition and had received more restorative dental care than the remaining part of the population.

Histological evaluation of the pulp in teeth from dogs with naturally occurring periodontal disease.

PubMed

Nemec, Ana; Pavlica, Zlatko; Stiblar-Martincic, Draga; Petelin, Milan; Erzen, Damjan; Crossley, David

2007-12-01

The purpose of this investigation was to evaluate the pulp of dog teeth affected by advanced periodontal disease. Histological examination was done on demineralized teeth extracted during clinical treatment of mature, client owned small and medium-size breed dogs with either good periodontal health or with advanced naturally occurring periodontal disease. Routinely stained sections from 5 clinically normal teeth and 22 teeth with advanced periodontitis from dogs between 5 and 12-years of age were examined using light microscopy. The pulp cavities of most teeth were narrow with low cellularity and some fibrosis of the pulp. Findings specific to periodontally affected teeth included acute and chronic pulpitis, vascular congestion, and pulp necrosis. A glomus body was identified in the pulp of one tooth and areas of poorly mineralized cementum were seen in both normal and diseased teeth. Age related changes in dog teeth appear similar to those reported for man and the rat. In addition to age related changes, the pulp of dog teeth with advanced periodontal disease were frequently inflamed or necrotic. This may reflect the advanced periodontitis affecting these teeth or a mechanical effect related to excessive tooth mobility. Further study is required to determine the etiology and significance of these findings and to investigate pulp status in less severely diseased teeth.

Does erosion progress differently on teeth already presenting clinical signs of erosive tooth wear than on sound teeth? An in vitro pilot trial.

PubMed

Carvalho, Thiago Saads; Baumann, Tommy; Lussi, Adrian

2016-07-07

Erosive tooth wear (ETW) is clinically characterized by a loss of tooth surface, and different enamel depths may have different susceptibility to demineralization. Therefore, the aim of this in vitro pilot study was to assess if the progression of erosive demineralization is faster on teeth already presenting signs of ETW when compared to originally sound teeth. We selected 23 central incisors: 14 were clinically sound (Sound) and 9 presented clinical signs of early erosive tooth wear (ETW-teeth). The teeth were embedded in resin, leaving an uncovered window of native enamel (6.69 ± 2.30 mm(2)) on the incisal half of the labial surface. We measured enamel surface reflection intensity (SRI) initially and after each consecutive erosive challenge (1 % citric acid, total of 4, 8, 12, 16, 20 and 24 min). Calcium released to the citric acid was measured with an atomic absorption spectrometer. We observed higher initial SRI values in ETW-teeth than in Sound teeth (p = 0.007). During in vitro erosive demineralization, we observed that erosion on originally Sound teeth progressed significantly slower (p = 0.033) than on ETW-teeth: SRI decreased by 75 % (from 100 to 25 %) on Sound teeth, and by 89 % (from 100 to 11 %) on ETW-teeth. Calcium release increased during erosion, but presented no significant differences (p = 0.643) between originally Sound (0.031 μmol/mm(2)) and ETW-teeth (0.032 μmol/mm(2)). There was satisfactory correlation between calcium release and rSRI values (r s  = -0.66). The optical reflectometer distinguished originally sound teeth from those with signs of ETW, and the results suggest that acid demineralization progresses differently on teeth already presenting clinical signs of ETW than on sound teeth.

Calcium phosphate mineralization is widely applied in crustacean mandibles.

PubMed

Bentov, Shmuel; Aflalo, Eliahu D; Tynyakov, Jenny; Glazer, Lilah; Sagi, Amir

2016-02-24

Crustaceans, like most mineralized invertebrates, adopted calcium carbonate mineralization for bulk skeleton reinforcement. Here, we show that a major part of the crustacean class Malacostraca (which includes lobsters, crayfishes, prawns and shrimps) shifted toward the formation of calcium phosphate as the main mineral at specified locations of the mandibular teeth. In these structures, calcium phosphate is not merely co-precipitated with the bulk calcium carbonate but rather creates specialized structures in which a layer of calcium phosphate, frequently in the form of crystalline fluorapatite, is mounted over a calcareous "jaw". From a functional perspective, the co-existence of carbonate and phosphate mineralization demonstrates a biomineralization system that provides a versatile route to control the physico-chemical properties of skeletal elements. This system enables the deposition of amorphous calcium carbonate, amorphous calcium phosphate, calcite and apatite at various skeletal locations, as well as combinations of these minerals, to form graded composites materials. This study demonstrates the widespread occurrence of the dual mineralization strategy in the Malacostraca, suggesting that in terms of evolution, this feature of phosphatic teeth did not evolve independently in the different groups but rather represents an early common trait.

Calcium phosphate mineralization is widely applied in crustacean mandibles

PubMed Central

Bentov, Shmuel; Aflalo, Eliahu D.; Tynyakov, Jenny; Glazer, Lilah; Sagi, Amir

2016-01-01

Crustaceans, like most mineralized invertebrates, adopted calcium carbonate mineralization for bulk skeleton reinforcement. Here, we show that a major part of the crustacean class Malacostraca (which includes lobsters, crayfishes, prawns and shrimps) shifted toward the formation of calcium phosphate as the main mineral at specified locations of the mandibular teeth. In these structures, calcium phosphate is not merely co-precipitated with the bulk calcium carbonate but rather creates specialized structures in which a layer of calcium phosphate, frequently in the form of crystalline fluorapatite, is mounted over a calcareous “jaw”. From a functional perspective, the co-existence of carbonate and phosphate mineralization demonstrates a biomineralization system that provides a versatile route to control the physico-chemical properties of skeletal elements. This system enables the deposition of amorphous calcium carbonate, amorphous calcium phosphate, calcite and apatite at various skeletal locations, as well as combinations of these minerals, to form graded composites materials. This study demonstrates the widespread occurrence of the dual mineralization strategy in the Malacostraca, suggesting that in terms of evolution, this feature of phosphatic teeth did not evolve independently in the different groups but rather represents an early common trait. PMID:26906263

Tooth wear: the view of the anthropologist

PubMed Central

2007-01-01

Anthropologists have for many years considered human tooth wear a normal physiological phenomenon where teeth, although worn, remain functional throughout life. Wear was considered pathological only if pulpal exposure or premature tooth loss occurred. In addition, adaptive changes to the stomatognathic system in response to wear have been reported including continual eruption, the widening of the masticatory cycle, remodelling of the temporomandibular joint and the shortening of the dental arches from tooth migration. Comparative studies of many different species have also documented these physiological processes supporting the idea of perpetual change over time. In particular, differential wear between enamel and dentine was considered a physiological process relating to the evolution of the form and function of teeth. Although evidence of attrition and abrasion has been known to exist among hunter-gatherer populations for many thousands of years, the prevalence of erosion in such early populations seems insignificant. In particular, non-carious cervical lesions to date have not been observed within these populations and therefore should be viewed as ‘modern-day’ pathology. Extrapolating this anthropological perspective to the clinical setting has merits, particularly in the prevention of pre-mature unnecessary treatment. PMID:17938977

Photogrammetry Impression Technique: A Case History Report.

PubMed

Sánchez-Monescillo, Andrés; Sánchez-Turrión, Andrés; Vellon-Domarco, Elena; Salinas-Goodier, Carmen; Prados-Frutos, Juan Carlos

2016-01-01

The aim of this report is to present photogrammetry as a reliable step in the fabrication of a full-arch immediate rehabilitation. A 59-year-old man attended the department seeking dental rehabilitation for the sequelae of severe oral health neglect. The mandibular teeth suffered from advanced periodontal disease and the patient wore a maxillary complete denture. An irreversible hydrocolloid impression of the mandibular arch was made, poured in stone, and digitally scanned to create the first stereolithography (STL) file. All teeth with the exception of two retained as landmarks were extracted, and seven implants were placed under local anesthesia and their positions recorded using photogrammetry. Maxillary and mandibular dental arch alginate impressions were made, poured in laboratory stone, and scanned. A provisional restoration was placed 7 hours after surgery using the STL files to determine the best-fit line. Radiographic and clinical follow-up after 1 year showed a favorable evolution of the implants. No screw loosening or other mechanical or biologic complications were observed. The case history using the described system suggests certain advantages over conventional techniques. More research is needed to assess the possible benefits associated with photogrammetry when making implant-supported restorations.

Tooth - abnormal shape

MedlinePlus

Hutchinson incisors; Abnormal tooth shape; Peg teeth; Mulberry teeth; Conical teeth ... The appearance of normal teeth varies, especially the molars. ... conditions. Specific diseases can affect tooth shape, tooth ...

Radiographic, computed tomographic, gross pathological and histological findings with suspected apical infection in 32 equine maxillary cheek teeth (2012-2015).

PubMed

Liuti, T; Smith, S; Dixon, P M

2018-01-01

Equine maxillary cheek teeth apical infections are a significant disorder because of frequent spread of infection to the supporting bones. The accuracy of computed tomographic imaging (CT) of this disorder has not been fully assessed. To compare the radiographic and CT findings in horses diagnosed with maxillary cheek teeth apical infections with pathological findings in the extracted teeth to assess the accuracy of these imaging techniques. Observational clinical study. Thirty-two maxillary cheek teeth (in 29 horses) diagnosed with apical infections by clinical, radiographic and principally by CT examinations, were extracted orally. The extracted teeth were subjected to further CT, gross pathological and histological examinations. Four normal teeth extracted from a cadaver served as controls. Pulpar and apical changes highly indicative of maxillary cheek teeth apical infection were present in all 32 teeth on CT, but in just 17/32 teeth (53%) radiographically. Gross pulpar/apical abnormalities and histological pulpar/periapical changes were present in 31/32 (97%) extracted teeth. On CT, one tooth contained small gas pockets in the apical aspect of one pulp and adjacent periodontal space, however no pathological changes were found following its extraction. The study is descriptive and is confined to a small number of cases. This study showed a 97% agreement between CT diagnosis of maxillary cheek teeth apical infection and the presence of pathological changes in the extracted teeth, confirming the diagnostic accuracy of CT compared with radiography for this disorder. © 2017 EVJ Ltd.

The Evolution of Fangs, Venom, and Mimicry Systems in Blenny Fishes.

PubMed

Casewell, Nicholas R; Visser, Jeroen C; Baumann, Kate; Dobson, James; Han, Han; Kuruppu, Sanjaya; Morgan, Michael; Romilio, Anthony; Weisbecker, Vera; Mardon, Karine; Ali, Syed A; Debono, Jordan; Koludarov, Ivan; Que, Ivo; Bird, Gregory C; Cooke, Gavan M; Nouwens, Amanda; Hodgson, Wayne C; Wagstaff, Simon C; Cheney, Karen L; Vetter, Irina; van der Weerd, Louise; Richardson, Michael K; Fry, Bryan G

2017-04-24

Venom systems have evolved on multiple occasions across the animal kingdom, and they can act as key adaptations to protect animals from predators [1]. Consequently, venomous animals serve as models for a rich source of mimicry types, as non-venomous species benefit from reductions in predation risk by mimicking the coloration, body shape, and/or movement of toxic counterparts [2-5]. The frequent evolution of such deceitful imitations provides notable examples of phenotypic convergence and are often invoked as classic exemplars of evolution by natural selection. Here, we investigate the evolution of fangs, venom, and mimetic relationships in reef fishes from the tribe Nemophini (fangblennies). Comparative morphological analyses reveal that enlarged canine teeth (fangs) originated at the base of the Nemophini radiation and have enabled a micropredatory feeding strategy in non-venomous Plagiotremus spp. Subsequently, the evolution of deep anterior grooves and their coupling to venom secretory tissue provide Meiacanthus spp. with toxic venom that they effectively employ for defense. We find that fangblenny venom contains a number of toxic components that have been independently recruited into other animal venoms, some of which cause toxicity via interactions with opioid receptors, and result in a multifunctional biochemical phenotype that exerts potent hypotensive effects. The evolution of fangblenny venom has seemingly led to phenotypic convergence via the formation of a diverse array of mimetic relationships that provide protective (Batesian mimicry) and predatory (aggressive mimicry) benefits to other fishes [2, 6]. Our results further our understanding of how novel morphological and biochemical adaptations stimulate ecological interactions in the natural world. Copyright © 2017 Elsevier Ltd. All rights reserved.

Alkaline phosphatase and OCT-3/4 as useful markers for predicting susceptibility of human deciduous teeth-derived dental pulp cells to reprogramming factor-induced iPS cells.

PubMed

Inada, Emi; Saitoh, Issei; Kubota, Naoko; Soda, Miki; Matsueda, Kazunari; Murakami, Tomoya; Sawami, Tadashi; Kagoshima, Akiko; Yamasaki, Youichi; Sato, Masahiro

2017-11-01

The aim of the present study was to prove that primary cells enriched with stem cells are more easily reprogrammed to generate induced pluripotent stem (iPS) cells than those with scarce numbers of stem cells. We surveyed the alkaline phosphatase (ALP) activity in five primarily-isolated human deciduous teeth-derived dental pulp cells (HDDPC) with cytochemical staining to examine the possible presence of stem cells. Next, the expression of stemness-specific factors, such as OCT(Octumer-binding transcription factor)3/4, NANOG, SOX2(SRY (sex determining region Y)-box 2), CD90, muscle segment homeodomain homeobox (MSX) 1, and MSX2, was assessed with a reverse transcription polymerase chain reaction method. Finally, these isolated HDDPC were transfected with plasmids carrying genes coding Yamanaka factors to determine whether these cells could be reprogrammed to generate iPS cells. Of the five primarily-isolated HDDPC, two (HDDPC-1 and -5) exhibited higher degrees of ALP activity. OCT-3/4 expression was also prominent in those two lines. Furthermore, these two lines proliferated faster than the other three lines. The transfection of HDDPC with Yamanaka factors resulted in the generation of iPS cells from HDDPC-1 and -5. The number of cells with the stemness property of HDDPC differs among individuals, which suggests that HDDPC showing an increased expression of both ALP and OCT-3/4 can be more easily reprogrammed to generate iPS cells after the forced expression of reprogramming factors. © 2016 John Wiley & Sons Australia, Ltd.

Clinical outcomes for teeth treated with electrospun poly(ε-caprolactone) fiber meshes/mineral trioxide aggregate direct pulp capping.

PubMed

Lee, Li-Wan; Hsiao, Sheng-Huang; Hung, Wei-Chiang; Lin, Yun-Ho; Chen, Po-Yu; Chiang, Chun-Pin

2015-05-01

Mineral trioxide aggregate (MTA) is a biocompatible material for direct pulp capping. This study was designed to compare the clinical outcomes of pulp-exposed teeth treated with either poly(ε-caprolactone) fiber mesh (PCL-FM) as a barrier for MTA (so-called PCL-FM/MTA) or MTA direct pulp capping. Sixty human vital teeth were evenly divided into 4 groups (n = 15 in each group). Teeth in groups 1 and 3 had pulp exposure <1 mm in diameter, whereas teeth in groups 2 and 4 had pulp exposure of 1-1.5 mm in diameter. Teeth in groups 1 and 2 were treated with PCL-FM/MTA direct pulp capping, and those in groups 3 and 4 were treated with MTA direct pulp capping. Teeth treated with PCL-FM/MTA direct pulp capping needed a significantly shorter mean duration for dentin bridge formation than teeth treated with MTA direct pulp capping. Moreover, teeth with pulp exposure <1.0 mm in diameter needed a significantly shorter mean duration for dentin bridge formation than teeth with pulp exposure of 1-1.5 mm in diameter after either PCL-FM/MTA or MTA direct pulp capping treatment. In addition, teeth treated with PCL-FM/MTA direct pulp capping formed an approximately 3-fold thicker dentin bridge than teeth treated with MTA direct pulp capping 8 weeks or 3 months later. Furthermore, none of the teeth treated with PCL-FM/MTA direct pulp capping showed tooth discoloration after treatment for 3 months. PCL-FM/MTA is a better combination material than MTA alone for direct pulp capping of human permanent teeth. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Study on digital teeth selection and virtual teeth arrangement for complete denture.

PubMed

Yu, Xiaoling; Cheng, Xiaosheng; Dai, Ning; Chen, Hu; Yu, Changjiang; Sun, Yuchun

2018-03-01

In dentistry, the complete denture is a conventional treatment for edentulous patients. The computer-aided design and computer-aided manufacturing (CAD/CAM) has been applied on the digital complete denture which is developed rapidly. Tooth selection and arrangement is one of the most important parts in digital complete denture. In this paper, we propose a new method of personalized teeth arrangement. This paper presents a method of arranging teeth virtually for a complete denture. First, scan and extract the feature points of the 3D triangular mesh data of artificial teeth (PLY format), then establish a tooth selection system. Second, scan and mark the anatomic characteristics of the maxillary and mandibular cast surfaces, such as facial midline, the curve of the arches. With the enter information, the study calculates the common arrangement lines of artificial teeth. Third, select the preferred artificial teeth and automatically arrange them virtually in the correct position by using our own software. After that, design the gingival part of the dentures on the basic of the arranged teeth on the screen and then fabricated it by using Computerized Numerical Control (CNC) technology, Rapid Prototyping (RP) technology or 3D printer technology. Finally, select artificial teeth were embedded in wax rims. This system can choose artificial teeth reasonably and the teeth placement can meet the dentist's request to a certain extent, whereas all the operations are based on the medical principles. The study performed here involves computer sciences, medicine, and dentistry, a teeth selection system was proposed and virtual teeth arrangement was described. This study has the capacity of helping operators to select teeth, which improved the accuracy of tooth arrangement, and customized complete denture. Copyright © 2017 Elsevier B.V. All rights reserved.

[The statistical analysis for the use of the 55,787 finished resin teeth].

PubMed

Wu, Shu-hong; Yu, Hai-yang; Wang, Lu; Xu, Ling; Xiao, Zhi-li

2010-08-01

To analyze the use situation of finished resin teeth for the different location, and to provide reference for manufacturers of finished resin teeth and all the buyers. To analyze the use situation of finished resin teeth in the Dental Laboratory of the Affiliated Hospital of Stomatology of Chongqing Medical University from January 2006 to December 2008 by using statistic methods. During the use of 55,787 finished resin teeth, the study found some rules. (1) The top use of finished resin teeth was D6 with the percentage of 5.31%, and the lowest use of finished resin teeth was D3 with the percentage of 1.94%. (2) Except the maxillary canines and the mandibular lateral incisors, there was no significant difference between the usage of other same name finished resin teeth (P > 0.05). (3) Among all finished resin teeth, the usage of section B exceeded section A, and the usage of maxillary finished resin teeth exceeded mandibular finished resin teeth (P < 0.05). (4) The use of the complete denture and single complete denture was about 1/3 of the total usage of finished resin teeth. (5) Except the use situation of complete denture and single complete denture, the frequency of simultaneously using mandibular left and right central incisors was the most with the percentage of 81.46%, for the frequency of simultaneously using maxillary left and right canines was 43.26% of the total, which was the lowest. There is significant difference in the use frequency of finished resin teeth for different location. For such reason, the manufacturers should produce finished resin teeth pro rata as well as the buyers for their purchase.

Relationship of Number of Missing Teeth to Hip Fracture in Elderly Patients: A Cohort Pilot Study.

PubMed

Priebe, Jennifer; Wermers, Robert A; Sems, Stephen A; Viozzi, Christopher F; Koka, Sreenivas

2017-09-15

To determine the relationship between the number of missing natural teeth or remaining natural teeth and osteoporotic hip fracture in elderly patients and to determine the relationship between the number of missing teeth or remaining teeth and osteoporotic fracture risk assessment (FRAX) probability. Number of missing teeth was determined by clinical oral exam on a total of 100 subjects, 50 with hip fractures and 50 without. Ten-year fracture risk and hip fracture risk probabilities were calculated using the FRAX tool. Statistical analyses were performed to determine strength of associations between number of missing natural teeth and likelihood of experiencing a fracture. Degree of correlation between number of missing natural teeth and FRAX probabilities were calculated. There appears to be an association between the number of missing natural teeth and hip fractures. For every 5-tooth increase in the number of missing teeth, the likelihood of being a subject in the hip fracture group increased by 26%. Number of missing natural teeth was positively correlated with FRAX overall fracture and hip fracture probability. Number of missing natural teeth may be a valuable tool to assist members of medical and dental teams in identifying patients with higher FRAX scores and higher likelihood of experiencing a hip fracture. Additional research is necessary to validate these findings. © 2017 by the American College of Prosthodontists.

90Sr specific activity of teeth of abandoned cattle after the Fukushima accident - teeth as an indicator of environmental pollution.

PubMed

Koarai, Kazuma; Kino, Yasushi; Takahashi, Atsushi; Suzuki, Toshihiko; Shimizu, Yoshinaka; Chiba, Mirei; Osaka, Ken; Sasaki, Keiichi; Urushihara, Yusuke; Fukuda, Tomokazu; Isogai, Emiko; Yamashiro, Hideaki; Oka, Toshitaka; Sekine, Tsutomu; Fukumoto, Manabu; Shinoda, Hisashi

2018-03-01

90 Sr specific activity in the teeth of young cattle that were abandoned in Kawauchi village and Okuma town located in the former evacuation areas of the Fukushima-Daiichi Nuclear Power Plant (FNPP) accident were measured. Additionally, specific activity in contaminated surface soils sampled from the same area was measured. (1) All cattle teeth examined were contaminated with 90 Sr. The specific activity, however, varied depending on the developmental stage of the teeth during the FNPP accident; teeth that had started development before the accident exhibited comparatively lower values, while teeth developed mainly after the accident showed higher values. (2) Values of 90 Sr-specific activity in teeth formed after the FNPP accident were higher than those of the bulk soil but similar to those in the exchangeable fraction (water and CH 3 COONH 4 soluble fractions) of the soil. The findings suggest that 90 Sr was incorporated into the teeth during the process of development, and that 90 Sr in the soluble and/or leachable fractions of the soil might migrate into teeth and contribute to the amount of 90 Sr in the teeth. Thus, the concentration of 90 Sr in teeth formed after the FNPP accident might reflect the extent of 90 Sr pollution in the environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Teething troubles?

PubMed

McIntyre, G T; McIntyre, G M

2002-03-09

The relationship between the eruption of the deciduous teeth and the general health of infants has been documented for over 5,000 years. A variety of physical disturbances (anything from minor upsets to potentially fatal illnesses) have historically been attributed to teething, however a number of recent publications have alluded to a clarification of some of the disputed features of teething. It is now accepted that the localised symptoms of teething vary between individuals, however, 'teething' continues to be an inappropriate diagnosis proffered by both healthcare professionals and lay people. Severe systemic upsets are unrelated to teething and, if present, the infant should be promptly referred to a physician for an accurate diagnosis and appropriate treatment. The treatment modalities used in teething have been diverse throughout the ages, frequently depending on the tenets of the medical profession and lay people, but now principally involve pain relief. This article examines the signs and symptoms frequently attributed to teething and their possible alternative causes. The contemporary principles of the management of teething are discussed, including supportive measures, the diverse range of available topical and systemic pharmacological preparations and the 'alternative' holistic therapies.

The prognosis of root canal therapy: a 10-year retrospective cohort study on 411 patients with 1175 endodontically treated teeth.

PubMed

Fonzar, Federica; Fonzar, Alberto; Buttolo, Piercarlo; Worthington, Helen V; Esposito, Marco

2009-01-01

To evaluate the 10-year prognosis of consecutively endodontically treated or retreated teeth and to investigate some of the prognostic factors which could predict the long-term outcome of endodontic therapy. This retrospective cohort study included any patient who had endodontically treated or retreated teeth from 1986 to 1998 by a single operator in a private practice. Outcome measures were clinical and radiographic success assessed by the operator, radiographic success assessed by an independent outcome assessor and complications evaluated 10 years after treatment. Descriptive statistics, life table, Kaplan-Meier and Cox regression analyses for success were fitted. A total of 411 patients with 1175 endodontically treated teeth were identified. Ten years after treatment 102 patients (24.8%) with 223 (19.0%) teeth were lost at the follow-up. The number of teeth that were originally treated and retreated were 704 and 471, respectively. Thirty-two teeth (2.7%) had one complication, which was successfully treated. A total of 988 (84.1%) teeth were considered a complete success, 46 (3.9%) a partial success, 52 (4.4%) a partial failure and 68 (5.8%) had to be extracted according to the treating clinician. For 21 teeth (1.8%) there was no follow-up information. The radiographic healing of 1086 teeth was evaluated by an independent assessor: 980 (90.2%) showed complete healing, 52 (4.8%) improvement, and 54 (5.0%) no change or worsening. The life-table analysis showed 93% of teeth surviving at 10 years after endodontic treatment. There were no differences for survival rates between teeth treated for the first time and those that were retreated (Kaplan-Meier). Teeth retreated because of symptoms or for a periapical/lateral radiolucency were more likely to fail. Approximately 7% of endodontically treated teeth were extracted 10 years after treatment. Symptoms and radiolucency of teeth needing retreatment may be important predictors for failure.

Life on the arc: principle-centered comprehensive care.

PubMed

Fohey, T; Cassidy, J L

1998-01-01

Today's dental practice is experiencing an evolution in the manner through which new materials and techniques are marketed and introduced. An increasing concern among the patient population regarding aesthetics contributes to the acceptance of a commodity dental philosophy, without questioning the reliability of the technique or new material. A principle-centered practice differentiates the product marketing from the viability of a restorative material in vivo. This article discusses the concept of a principle-centered practice and describes how to place quality products in a balanced system in which harmony exits between all components of the masticatory system: the teeth, the muscles, and the temporomandibular joints.

Advances in dental veneers: materials, applications, and techniques

PubMed Central

Pini, Núbia Pavesi; Aguiar, Flávio Henrique Baggio; Lima, Débora Alves Nunes Leite; Lovadino, José Roberto; Terada, Raquel Sano Suga; Pascotto, Renata Corrêa

2012-01-01

Laminate veneers are a conservative treatment of unaesthetic anterior teeth. The continued development of dental ceramics offers clinicians many options for creating highly aesthetic and functional porcelain veneers. This evolution of materials, ceramics, and adhesive systems permits improvement of the aesthetic of the smile and the self-esteem of the patient. Clinicians should understand the latest ceramic materials in order to be able to recommend them and their applications and techniques, and to ensure the success of the clinical case. The current literature was reviewed to search for the most important parameters determining the long-term success, correct application, and clinical limitations of porcelain veneers. PMID:23674920

Autocrine and paracrine Shh signaling are necessary for tooth morphogenesis, but not tooth replacement in snakes and lizards (Squamata).

PubMed

Handrigan, Gregory R; Richman, Joy M

2010-01-01

Here we study the role of Shh signaling in tooth morphogenesis and successional tooth initiation in snakes and lizards (Squamata). By characterizing the expression of Shh pathway receptor Ptc1 in the developing dentitions of three species (Eublepharis macularius, Python regius, and Pogona vitticeps) and by performing gain- and loss-of-function experiments, we demonstrate that Shh signaling is active in the squamate tooth bud and is required for its normal morphogenesis. Shh apparently mediates tooth morphogenesis by separate paracrine- and autocrine-mediated functions. According to this model, paracrine Shh signaling induces cell proliferation in the cervical loop, outer enamel epithelium, and dental papilla. Autocrine signaling within the stellate reticulum instead appears to regulate cell survival. By treating squamate dental explants with Hh antagonist cyclopamine, we induced tooth phenotypes that closely resemble the morphological and differentiation defects of vestigial, first-generation teeth in the bearded dragon P. vitticeps. Our finding that these vestigial teeth are deficient in epithelial Shh signaling further corroborates that Shh is needed for the normal development of teeth in snakes and lizards. Finally, in this study, we definitively refute a role for Shh signaling in successional dental lamina formation and conclude that other pathways regulate tooth replacement in squamates.

Orthodontic Intervention to Impacted and Transposed Lower Canines

PubMed Central

Kılıç, Nihat

2017-01-01

Impacted and transposed teeth cause serious difficulties in tooth eruption and movement as well as esthetic and functional outcomes. Proper treatment planning including good biomechanical control is essential in order to avoid side effects during traction and aligning of the impacted and/or transposed teeth. The purpose of the present study was to present a successfully treated female patient having transposed and impacted lower canines by means of a modified lingual arch and fixed orthodontic appliance. A female patient aged 13 years and 9 months presented to the orthodontic department with a chief compliant of bilateral spacing and missing teeth in mandibular dentition. After leveling and creating sufficient space in the mandibular arch for the canines, a modified lingual arch was cemented to the mandibular first molars. The lingual arch had two hooks extending to the distobuccal areas of the canine spaces. Elastic chains were applied between the hooks on the lingual arch and the ligatures tied to the attachments on the canine crowns. The light forces generated by elastic materials caused impacted canines to erupt and tend towards their own spaces in the dental arch. As a result, impacted and transposed lower canines were properly positioned in their spaces, and the treatment results were stable during the retention period. PMID:28540090

Sodium Channel Expression and Localization at Demyelinated Sites in Painful Human Dental Pulp

PubMed Central

Henry, Michael A.; Luo, Songjiang; Foley, Benjamin D.; Rzasa, Rachael S.; Johnson, Lonnie R.; Levinson, S. Rock

2009-01-01

The expression of sodium channels (NaCh(s)) change after inflammatory and nerve lesions and this change has been implicated in the generation of pain states. Here we examine NaCh expression within nerve fibers from normal and painful extracted human teeth with special emphasis on their localization within large accumulations, like those seen at nodes of Ranvier. Pulpal tissue sections from normal wisdom teeth and from teeth with large carious lesions associated with severe and spontaneous pain were double-stained with pan-specific NaCh antibody and caspr (paranodal protein used to visualize nodes of Ranvier) antibody, while additional sections were triple-stained with NaCh, caspr and myelin basic protein (MBP) antibodies. Z-series of images were obtained with the confocal microscope and evaluated with NIH ImageJ software to quantify the density and size of NaCh accumulations, and to characterize NaCh localization at caspr-identified typical and atypical nodal sites. Although the results showed variability in the overall density and size of NaCh accumulations in painful samples, a common finding included the remodeling of NaChs at atypical nodal sites. This remodeling of NaChs included prominent NaCh expression within nerve regions that showed a selective loss of MBP staining in a pattern consistent with a demyelinating process. PMID:19559391

Comparison of the cleaning capacity of Mtwo and Pro Taper rotary systems and manual instruments in primary teeth

PubMed Central

Azar, Mohammad Reza; Safi, Laya; Nikaein, Afshin

2012-01-01

Background: Root canal cleaning is an important step in endodontic therapy. In order to develop better techniques, a new generation of endodontic instruments has been designed. The aim of this study was to compare the effectiveness of manual K-files (Mani Co, Tokyo, Japan) and two rotary systems–Mtwo (Dentsply-Maillefer, Ballaigues, Switzerland) and ProTaper (VDW, Munich, Germany)–for root canal preparation in primary molars. Materials and Methods: India ink was injected to 160 mesiobuccal and distal root canals of mandibular primary molars. The teeth were randomly divided into three experimental groups and one control group. In each experimental group, either manual instruments (K-files) or rotary instruments (Mtwo or ProTaper) were used to prepare root canals. After cleaning the canals and clearing the teeth, ink removal was evaluated with a stereomicroscope. Statistical analysis was done with Kruskal–Wallis and Friedman tests. Results: There were no significant differences in cleaning efficiency between manual and rotary instruments. Only ProTaper files performed significantly better in the coronal and middle thirds than in the apical third of the root canal. Conclusion: Manual K-files and the Mtwo and ProTaper rotary systems showed equally acceptable cleaning ability in primary molar root canals. PMID:22623929

A geometric morphometric analysis of hominin lower molars: Evolutionary implications and overview of postcanine dental variation.

PubMed

Gómez-Robles, Aida; Bermúdez de Castro, José María; Martinón-Torres, María; Prado-Simón, Leyre; Arsuaga, Juan Luis

2015-05-01

Lower molars have been extensively studied in the context of hominin evolution using classic and geometric morphometric analyses, 2D and 3D approaches, evaluations of the external (outer enamel surface) and internal anatomy (dentine, pulp chamber, and radicular canals), and studies of the crown and root variation. In this study, we present a 2D geometric morphometric analysis of the crown anatomy of lower first, second, and third molars of a broad sample of hominins, including Pliocene and Lower, Middle, and Upper Pleistocene species coming from Africa, Asia, and Europe. We show that shape variability increases from first to second and third molars. While first molars tend to retain a relatively stable 5-cusped conformation throughout the hominin fossil record, second and third molars show marked distal reductions in later Homo species. This trend to distal reduction is similar to that observed in previous studies of premolars and upper second and third molars, and points to a correlated reduction of distal areas across the whole postcanine dentition. Results on lower molar variation, as well as on other postcanine teeth, show certain trends in European Pleistocene populations from the Atapuerca sites. Middle Pleistocene hominins from Sima de los Huesos show Neanderthal affinities and strong dental reduction, especially in the most distal molars. The degree of dental reduction in this population is stronger than that observed in classic Neanderthals. Homo antecessor hominins from Gran Dolina-TD6 have primitive lower teeth that contrast with their more derived upper teeth. The evolutionary implications of these dental affinities are discussed in light of recent paleogenetic studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Eighty-five million years of Pacific Ocean gyre ecosystem structure: long-term stability marked by punctuated change.

PubMed

Sibert, Elizabeth; Norris, Richard; Cuevas, Jose; Graves, Lana

2016-05-25

While the history of taxonomic diversification in open ocean lineages of ray-finned fish and elasmobranchs is increasingly known, the evolution of their roles within the open ocean ecosystem remains poorly understood. To assess the relative importance of these groups through time, we measured the accumulation rate of microfossil fish teeth and elasmobranch dermal denticles (ichthyoliths) in deep-sea sediment cores from the North and South Pacific gyres over the past 85 million years (Myr). We find three distinct and stable open ocean ecosystem structures, each defined by the relative and absolute abundance of elasmobranch and ray-finned fish remains. The Cretaceous Ocean (pre-66 Ma) was characterized by abundant elasmobranch denticles, but low abundances of fish teeth. The Palaeogene Ocean (66-20 Ma), initiated by the Cretaceous/Palaeogene mass extinction, had nearly four times the abundance of fish teeth compared with elasmobranch denticles. This Palaeogene Ocean structure remained stable during the Eocene greenhouse (50 Ma) and the Eocene-Oligocene glaciation (34 Ma), despite large changes in the overall accumulation of both groups during those intervals, suggesting that climate change is not a primary driver of ecosystem structure. Dermal denticles virtually disappeared from open ocean ichthyolith assemblages approximately 20 Ma, while fish tooth accumulation increased dramatically in variability, marking the beginning of the Modern Ocean. Together, these results suggest that open ocean fish community structure is stable on long timescales, independent of total production and climate change. The timing of the abrupt transitions between these states suggests that the transitions may be due to interactions with other, non-preserved pelagic consumer groups. © 2016 The Author(s).

Eighty-five million years of Pacific Ocean gyre ecosystem structure: long-term stability marked by punctuated change

PubMed Central

Norris, Richard; Cuevas, Jose; Graves, Lana

2016-01-01

While the history of taxonomic diversification in open ocean lineages of ray-finned fish and elasmobranchs is increasingly known, the evolution of their roles within the open ocean ecosystem remains poorly understood. To assess the relative importance of these groups through time, we measured the accumulation rate of microfossil fish teeth and elasmobranch dermal denticles (ichthyoliths) in deep-sea sediment cores from the North and South Pacific gyres over the past 85 million years (Myr). We find three distinct and stable open ocean ecosystem structures, each defined by the relative and absolute abundance of elasmobranch and ray-finned fish remains. The Cretaceous Ocean (pre-66 Ma) was characterized by abundant elasmobranch denticles, but low abundances of fish teeth. The Palaeogene Ocean (66–20 Ma), initiated by the Cretaceous/Palaeogene mass extinction, had nearly four times the abundance of fish teeth compared with elasmobranch denticles. This Palaeogene Ocean structure remained stable during the Eocene greenhouse (50 Ma) and the Eocene–Oligocene glaciation (34 Ma), despite large changes in the overall accumulation of both groups during those intervals, suggesting that climate change is not a primary driver of ecosystem structure. Dermal denticles virtually disappeared from open ocean ichthyolith assemblages approximately 20 Ma, while fish tooth accumulation increased dramatically in variability, marking the beginning of the Modern Ocean. Together, these results suggest that open ocean fish community structure is stable on long timescales, independent of total production and climate change. The timing of the abrupt transitions between these states suggests that the transitions may be due to interactions with other, non-preserved pelagic consumer groups. PMID:27194702

Impacted Wisdom Teeth

MedlinePlus

Impacted wisdom teeth Overview Impacted wisdom teeth are third molars at the back of the mouth that don' ... with an impacted wisdom tooth. Causes Wisdom teeth (third molars) become impacted because they don't have enough ...

Experimental Evolution of Antibiotic Resistance in Bacteria

ERIC Educational Resources Information Center

Krist, Amy C.; Showsh, Sasha A.

2007-01-01

Evolution is typically measured as a change in allele or genotype frequencies over one or more generations. Consequently, evolution is difficult to show experimentally in a semester-long lab course because most organisms have longer generation times than 15 weeks. In this article, the authors present an experiment to demonstrate and study…

Estimation of age from teeth by amino acid racemization: influence of fixative.

PubMed

Ohtani, S; Ohhira, H; Watanabe, A; Ogasawara, A; Sugimoto, H

1997-01-01

To determine the age of a subject from teeth accurately utilizing the racemization rates of amino acids, standard samples of the same tooth species from the same jaw are necessary as controls, as well as data for identification. However, standard teeth are generally stored in fixatives such as ethanol and formalin. We investigated and compared the degree of progression of racemization of dentinal aspartic acid in teeth stored in 95% ethanol, 10% formalin, or 10% neutral formalin fixatives. The racemization rate of dentinal aspartic acid in teeth stored in 10% neutral formalin was the highest, followed by that for teeth stored in 10% formalin then that for teeth stored in 95% ethanol. Teeth stored in these fixatives at 15 degrees C showed almost no progression of racemization. The racemization ratio (D/L ratio) in teeth extracted 10 years previously was almost unchanged from that at the time of extraction, and allowed an accurate evaluation of the subjects age at tooth extraction.

Teeth Injuries (For Parents)

MedlinePlus

... Videos for Educators Search English Español First Aid: Teeth Injuries KidsHealth / For Parents / First Aid: Teeth Injuries ... or young child injures the gums or baby teeth: Apply pressure to the area (if it's bleeding) ...

Wisdom Teeth Management

MedlinePlus

Wisdom Teeth Management Wisdom teeth, or third molars, are the last teeth to develop and appear in your mouth. They come ... of third molars, disease status, and to suggest management options ranging from removal to a monitored retention ...

Partial tooth gear bearings

NASA Technical Reports Server (NTRS)

Vranish, John M. (Inventor)

2010-01-01

A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

Management of a rare case of idiopathic multiple unerupted impacted permanent teeth in an adult female patient

PubMed Central

Shetty, Karunakar; Kumar, Mahesh; Amanna, Susan; Sridharan, Srirangarajan; Reddy, Satyanarayan

2016-01-01

This clinical case report describes the multi-disciplinary approach in the management of an unusual presentation of idiopathic multiple unerupted impacted permanent teeth in a 20-year-old female patient. The case was unique in that, not only were there multiple missing permanent teeth, but also over retained deciduous teeth and attrited existing permanent teeth with loss of vertical dimension of occlusion. Since the patient was young, it was decided to retain all the erupted permanent teeth and extract the infected deciduous teeth with the objective of fabricating overlay complete dentures. This is a simple, reversible and an economical treatment modality, which satisfies both the esthetic and functional demands where the extraction of teeth is not generally indicated and, in addition, provides a stable occlusion. PMID:27621553

Comparison of the microhardness of primary and permanent teeth after immersion in two types of carbonated beverages.

PubMed

Haghgou, Hamid R; Haghgoo, Roza; Asdollah, Fatemah Molla

2016-01-01

The consumption of carbonated beverages is one of the etiological factors that cause dental erosion. The purpose of this research was to compare changes in the microhardness of permanent and primary teeth after immersion in two types of carbonated beverages. This investigation was done on 30 healthy permanent molars and 30 healthy primary canines. Each group of primary and permanent teeth was subdivided into three groups of 10 teeth. The teeth was immersed in 40 ml of each of the three beverages for 5 min. One subgroup was immersed in water (as a control). The next was immersed in Lemon Delster and the last subgroup was immersed in Coca-Cola. The microhardness of enamel was measured using the Vickers method before and after immersion. Finally, the data was analyzed by paired t-test, one-way analysis of variance, and t-test. Microhardness reduction in the primary teeth was significant in both the Lemon Delster and Coca-Cola groups (P < 0.05). This reduction was also statistically significant in the permanent teeth (P < 0.05). A comparison of the enamel changes in the primary teeth with permanent teeth after immersion in both beverages showed a greater microhardness reduction in the primary teeth in both the experimental groups. Coca-Cola and Lemon Delster caused a significant reduction of microhardness in tooth enamel. This reduction was greater in primary teeth than in permanent teeth, and was also greater after immersion in Coca-Cola than after immersion in Lemon Delster.

Replantation of 45 avulsed permanent teeth: a 1-year follow-up study.

PubMed

Chappuis, Vivianne; von Arx, Thomas

2005-10-01

Thirty-four patients with 45 avulsed and replanted permanent teeth were followed for 1 year. All teeth were soaked in tetracycline before replantation. In addition, enamel matrix derivative was used in teeth with dry storage times exceeding 30 min. Splinting was carried out with a non-rigid titanium splint and was limited to 7-10 days. Within that period, root canal treatment was begun in all teeth with a closed apex, whereas teeth with an open apex and ideal post-traumatic storage were not instrumented. All patients were given tetracycline systematically for 10 days. The survival rate of replanted avulsed permanent teeth was 95.6% at the 1-year follow-up. In 82.2%, root canal treatment was performed. Pulp survival was never observed, but three teeth had pulp canal obliteration. Normal periodontal healing was observed in 57.7% of teeth; 42.3% of teeth showed external root resorption (28.9% replacement resorption, 6.7% infection-related resorption, 6.7% surface resorption). The occurrence of replacement resorption correlated with the period of extraoral dry storage. Compared with other clinical studies on avulsed and replanted teeth, the present study reports a higher percentage of periodontal healing. The favorable treatment outcome may be associated with a strict protocol to enforce endodontic treatment, the use of topical and systemic tetracycline, and the relatively high number of ideally stored teeth following avulsion. In contrast, the present study has a follow-up period limited to 1 year.

Cutting blade dentitions in squaliform sharks form by modification of inherited alternate tooth ordering patterns

PubMed Central

Smith, Moya Meredith

2016-01-01

The squaliform sharks represent one of the most speciose shark clades. Many adult squaliforms have blade-like teeth, either on both jaws or restricted to the lower jaw, forming a continuous, serrated blade along the jaw margin. These teeth are replaced as a single unit and successor teeth lack the alternate arrangement present in other elasmobranchs. Micro-CT scans of embryos of squaliforms and a related outgroup (Pristiophoridae) revealed that the squaliform dentition pattern represents a highly modified version of tooth replacement seen in other clades. Teeth of Squalus embryos are arranged in an alternate pattern, with successive tooth rows containing additional teeth added proximally. Asynchronous timing of tooth production along the jaw and tooth loss prior to birth cause teeth to align in oblique sets containing teeth from subsequent rows; these become parallel to the jaw margin during ontogeny, so that adult Squalus has functional tooth rows comprising obliquely stacked teeth of consecutive developmental rows. In more strongly heterodont squaliforms, initial embryonic lower teeth develop into the oblique functional sets seen in adult Squalus, with no requirement to form, and subsequently lose, teeth arranged in an initial alternate pattern. PMID:28018617

Micromorphological differentiation of left and right stridulatory apparatus in crickets (Orthoptera: Gryllidae).

PubMed

Li, Xiaoqiang; Zhang, Xue; Luo, Wenqi; Wang, Yinliang; Ren, Bingzhong

2016-06-24

The present study compared micromorphological differentiation of stridulatory apparatus between the functional right tegmen and non-functional left tegmen, analyzed under scanning electron microscope (SEM), among eight Gryllidae species. The results showed that the main differences were found on the length and shape of files and teeth. The length of stridulatory file and teeth number were lower on the left stridulatory apparatus than that on right stridulatory apparatus in all species. However, the ratio between the length of stridulatory teeth and the interval of stridulatory teeth was significantly higher on the left stridulatory apparatus than that on right stridulatory apparatus in Dianemobius fascipes, Polionemobius taprobanensis, Pteronemobius gifuensis, Teleogryllus occipitalis and Oecanthus longicauda. In addition, the length of stridulatory teeth was positively related to number of stridulatory teeth, however, the interval of stridulatory teeth was negatively related to the ratio between the length of stridulatory teeth and the interval of stridulatory teeth for left and right stridulatory apparatus. Our result illustrated that the length of left and right stridulatory file and teeth length could be an effective character to distinguish species. Left stridulatory apparatus was not entirely degraded than right stridulatory apparatus.

Dental Anomalies in Permanent Teeth after Trauma in Primary Dentition.

PubMed

Bardellini, Elena; Amadori, Francesca; Pasini, Stefania; Majorana, Alessandra

This retrospective study aims to evaluate the prevalence of dental anomalies in permanent teeth as a result of a trauma concerning the predecessor primary teeth. A total of 241 records of children (118 males and 123 females, mean age 3.62 ± 1.40) affected by trauma on primary teeth were analyzed. All patients were recalled to evaluate the status of the permanent successor teeth by clinical and radiographic investigations. Out of 241 patients, 106 patients (for a total of 179 traumatized primary teeth) presented at the recall. Dental anomalies on successor permanent teeth were detected in 21 patients (19.8%), for a total of 26 teeth (14.5%) and 28 anomalies. Anomalies of the eruptive process were the most observed disturbances (60.7%), followed by enamel hypoplasia (25%) and white spots (14.3%). A higher percentage of anomalies on permanent teeth was observed when trauma occurred at an age less than 36 months (38.5% of cases). Intrusive and extrusive luxation were related with the most cases of clinical disturbances in the successor permanent teeth. The results of this study highlight the risk of dental anomalies after a trauma in primary dentition, especially in early-aged children and in case of intrusive luxation.

Cutting blade dentitions in squaliform sharks form by modification of inherited alternate tooth ordering patterns

NASA Astrophysics Data System (ADS)

Underwood, Charlie; Johanson, Zerina; Smith, Moya Meredith

2016-11-01

The squaliform sharks represent one of the most speciose shark clades. Many adult squaliforms have blade-like teeth, either on both jaws or restricted to the lower jaw, forming a continuous, serrated blade along the jaw margin. These teeth are replaced as a single unit and successor teeth lack the alternate arrangement present in other elasmobranchs. Micro-CT scans of embryos of squaliforms and a related outgroup (Pristiophoridae) revealed that the squaliform dentition pattern represents a highly modified version of tooth replacement seen in other clades. Teeth of Squalus embryos are arranged in an alternate pattern, with successive tooth rows containing additional teeth added proximally. Asynchronous timing of tooth production along the jaw and tooth loss prior to birth cause teeth to align in oblique sets containing teeth from subsequent rows; these become parallel to the jaw margin during ontogeny, so that adult Squalus has functional tooth rows comprising obliquely stacked teeth of consecutive developmental rows. In more strongly heterodont squaliforms, initial embryonic lower teeth develop into the oblique functional sets seen in adult Squalus, with no requirement to form, and subsequently lose, teeth arranged in an initial alternate pattern.

Taking Care of Your Teeth

MedlinePlus

... Educators Search English Español Taking Care of Your Teeth KidsHealth / For Kids / Taking Care of Your Teeth ... they help you look your best. Why Healthy Teeth Are Important How does taking care of your ...

Mouth and Teeth (For Parents)

MedlinePlus

... Videos for Educators Search English Español Mouth and Teeth KidsHealth / For Parents / Mouth and Teeth What's in ... daily lives. Basic Anatomy of the Mouth and Teeth The entrance to the digestive tract, the mouth ...

Take Care of Your Child's Teeth

MedlinePlus

... Topic En español Take Care of Your Child’s Teeth Browse Sections The Basics Overview Tooth Decay Take ... the toothpaste instead of swallowing it Make brushing teeth fun. Getting kids to brush their teeth can ...

Keeping Your Child's Teeth Healthy

MedlinePlus

... for Educators Search English Español Keeping Your Child's Teeth Healthy KidsHealth / For Parents / Keeping Your Child's Teeth ... and guidelines. When Should Kids Start Brushing Their Teeth? Good dental care begins before a baby's first ...

Occlusal enamel complexity in middle miocene to holocene equids (Equidae: Perissodactyla) of North America.

PubMed

Famoso, Nicholas A; Davis, Edward Byrd

2014-01-01

Four groups of equids, "Anchitheriinae," Merychippine-grade Equinae, Hipparionini, and Equini, coexisted in the middle Miocene, but only the Equini remains after 16 Myr of evolution and extinction. Each group is distinct in its occlusal enamel pattern. These patterns have been compared qualitatively but rarely quantitatively. The processes influencing the evolution of these occlusal patterns have not been thoroughly investigated with respect to phylogeny, tooth position, and climate through geologic time. We investigated Occlusal Enamel Index, a quantitative method for the analysis of the complexity of occlusal patterns. We used analyses of variance and an analysis of co-variance to test whether equid teeth increase resistive cutting area for food processing during mastication, as expressed in occlusal enamel complexity, in response to increased abrasion in their diet. Results suggest that occlusal enamel complexity was influenced by climate, phylogeny, and tooth position through time. Occlusal enamel complexity in middle Miocene to Modern horses increased as the animals experienced increased tooth abrasion and a cooling climate.

Occlusal Enamel Complexity in Middle Miocene to Holocene Equids (Equidae: Perissodactyla) of North America

PubMed Central

Famoso, Nicholas A.; Davis, Edward Byrd

2014-01-01

Four groups of equids, “Anchitheriinae,” Merychippine-grade Equinae, Hipparionini, and Equini, coexisted in the middle Miocene, but only the Equini remains after 16 Myr of evolution and extinction. Each group is distinct in its occlusal enamel pattern. These patterns have been compared qualitatively but rarely quantitatively. The processes influencing the evolution of these occlusal patterns have not been thoroughly investigated with respect to phylogeny, tooth position, and climate through geologic time. We investigated Occlusal Enamel Index, a quantitative method for the analysis of the complexity of occlusal patterns. We used analyses of variance and an analysis of co-variance to test whether equid teeth increase resistive cutting area for food processing during mastication, as expressed in occlusal enamel complexity, in response to increased abrasion in their diet. Results suggest that occlusal enamel complexity was influenced by climate, phylogeny, and tooth position through time. Occlusal enamel complexity in middle Miocene to Modern horses increased as the animals experienced increased tooth abrasion and a cooling climate. PMID:24587267

Observations of the Evolution of Ion Outflow During a Sawtooth Event

NASA Astrophysics Data System (ADS)

Lund, E. J.; Nowrouzi, N.; Kistler, L. M.; Cai, X.; Frey, H. U.

2015-12-01

Sawtooth oscillations are one of several convection modes known to exist in the magnetosphere. Recent simulations have suggested that O+^+ ions transported from the high-latitude ionosphere to the magnetotail can drive sawtooth events. We present observational case studies of sawtooth events using data from FAST near the noon-midnight meridional plane, Cluster in the magnetotail, GOES and LANL energetic particle sensors at geosynchronous orbit, and ACE solar wind data to investigate the evolution of ion outflow during sawtooth events and the question of whether O+^+ outflow from one tooth helps to drive subsequent teeth. We find that oxygen enters the tail from the lobes after each tooth onset, the oxygen fraction in the magnetotail often increases after a tooth onset, and that the oxygen fraction of outflowing ions increases after a tooth event both in the cusp and on the nightside. However, a significant amount of low energy oxygen (≲1 keV) can end up in the dayside inner magnetosphere.

History and evolution of TMD concepts.

PubMed

McNeill, C

1997-01-01

Historically the field of temporomandibular disorders (TMD) has been based on testimonials, clinical opinion, and blind faith rather than on science. Reparative procedures to the joints, jaws, or occlusal surfaces of the teeth to develop idealized structural relationships that may be required for dental health and function are less likely to be required for the management of chronic musculoskeletal disorders. Because of the concerns of many people today regarding professional credibility and intellectual honesty, the need for a scientific foundation to support the various belief systems is of paramount importance. In fact, therapeutic approaches for TMD are undergoing a major evolution away from the traditional mechanistic dental concepts of the past to the more current biopsychosocial medical concepts that emphasize multidisciplinary approaches. Recent advances in the understanding of pain mechanisms and management of chronic pain have improved long-term treatment outcome. The emphasis is on treatment that involves the patient in the physical and behavioral management of their own problem. The majority of patients with TMD achieve good relief of their symptoms with noninvasive, conservative therapy.

Dental microwear in relation to changes in the direction of mastication during the evolution of Myodonta (Rodentia, Mammalia)

NASA Astrophysics Data System (ADS)

Charles, Cyril; Jaeger, Jean-Jacques; Michaux, Jacques; Viriot, Laurent

2007-01-01

Observations of dental microwear are used to analyse the correlation between changes in molar tooth crown morphology and the direction of masticatory movement during the evolution of Myodonta (Rodentia, Mammalia). The studied sample includes 36 specimens representing both superfamilies of Myodonta (Muroidea and Dipodoidea) spanning 16 dipodoid and 9 muroid species. Microscopic scratches on occlusal surfaces resulting from contact between opposite teeth during mastication are analysed. Using these features, we determine the direction of masticatory movements. Microwear patterns display diverse orientations among Dipodoidea: oblique in Sicistinae, Euchoreutinae and Zapodinae, propalinal in Dipodinae and intermediary in Allactaginae. Similarly, Muroidea exhibit the following orientations: oblique in Cricetinae and propalinal in Arvicolinae, Cricetomyinae, Gerbillinae and Murinae. These various chewing types illustrate different evolutionary grades within the superfamilies. Acquisition of the antero-posterior masticatory movement in Dipodoidea is related to flattening of the molar occlusal surface. However, in some muroid subfamilies, this direction of mastication is associated with low-crowned and cuspidate molars (Cricetomyinae, Murinae).

The integration of quantitative genetics, paleontology, and neontology reveals genetic underpinnings of primate dental evolution.

PubMed

Hlusko, Leslea J; Schmitt, Christopher A; Monson, Tesla A; Brasil, Marianne F; Mahaney, Michael C

2016-08-16

Developmental genetics research on mice provides a relatively sound understanding of the genes necessary and sufficient to make mammalian teeth. However, mouse dentitions are highly derived compared with human dentitions, complicating the application of these insights to human biology. We used quantitative genetic analyses of data from living nonhuman primates and extensive osteological and paleontological collections to refine our assessment of dental phenotypes so that they better represent how the underlying genetic mechanisms actually influence anatomical variation. We identify ratios that better characterize the output of two dental genetic patterning mechanisms for primate dentitions. These two newly defined phenotypes are heritable with no measurable pleiotropic effects. When we consider how these two phenotypes vary across neontological and paleontological datasets, we find that the major Middle Miocene taxonomic shift in primate diversity is characterized by a shift in these two genetic outputs. Our results build on the mouse model by combining quantitative genetics and paleontology, and thereby elucidate how genetic mechanisms likely underlie major events in primate evolution.

Why human evolution should be a basic science for medicine and psychology students.

PubMed

Palanza, Paola; Parmigiani, Stefano

2016-06-20

Based on our teaching experience in medicine and psychology degree programs, we examine different aspects of human evolution that can help students to understand how the human body and mind work and why they are vulnerable to certain diseases. Three main issues are discussed: 1) the necessity to consider not only the mechanisms, i.e. the "proximate causations", implicated in biological processes but also why these mechanisms have evolved, i.e. the "ultimate causations" or "adaptive significance", to understand the functioning and malfunctioning of human body and mind; 2) examples of how human vulnerabilities to disease are caused by phylogenetic constraints, evolutionary tradeoffs reflecting the combined actions of natural and sexual selection, and/or mismatch between past and present environment (i.e., evolution of the eye, teeth and diets, erect posture and their consequences); 3) human pair-bonding and parent-offspring relationships as the result of socio-sexual selection and evolutionary compromises between cooperation and conflict. These psychobiological mechanisms are interwoven with our brain developmental plasticity and the effects of culture in shaping our behavior and mind, and allow a better understanding of functional (normal) and dysfunctional (pathological) behaviors. Thus, because the study of human evolution offers a powerful framework for clinical practice and research, the curriculum studiorum of medical and psychology students should include evolutionary biology and human phylogeny.

To explore and develop a model to maintain and build upon a dental clinic open for all in developing regions, with a primary focus on India

PubMed Central

Sugandhi, Ayushi; Mangal, Brijesh; Mishra, Amit Kumar; Sethia, Bhavna

2014-01-01

AIM: To study a service model that enables a clinic to be open to all members of the community, irrespective of their ability to pay. METHODS: Sampling methodology was used to gather information in two phases, with the city of Indore as the target region. In the first phase, dental professionals were surveyed to gather the cost of the facility, land and equipment and the cost of sustaining the practice. In the second phase, the residents of Indore were surveyed to collect information regarding their oral health problems and their expenditure for the same. Assessing the current situation, the questions to answer are related to the issues of dental health care access problems and the resources required, human and financial. RESULTS: (1) People younger than 20 years of age form a large proportion (43%) of the population of the city and also a large proportion (54%) of people who visit dental clinics; (2) Dental caries are commonly found in the population younger than 20 years of age and mobile teeth in those older than 50 years of age; (3) Dental caries and mobile teeth are almost equally found in people of the age group 20-50 years old; (4) A significantly large proportion of those older than 50 years old have had all their teeth extracted; and (5) A significantly large proportion of the 20-30 years of age group has had no teeth extracted. CONCLUSION: The model which we propose works well for low income patients; however, it places a lot of extra burden on the higher income group. A lot of effort can be put into generating revenue from other sources, including events and donations. PMID:25232547

Ectopic Hard Tissue Formation by Odonto/Osteogenically In Vitro Differentiated Human Deciduous Teeth Pulp Stem Cells.

PubMed

Kim, Seunghye; Song, Je Seon; Jeon, Mijeong; Shin, Dong Min; Kim, Seong-Oh; Lee, Jae Ho

2015-07-01

There have been many attempts to use the pulp tissue from human deciduous teeth for dentin or bone regeneration. The objective of this study was to determine the effects of odonto/osteogenic in vitro differentiation of deciduous teeth pulp stem cells (DTSCs) on their in vivo hard tissue-forming potential. DTSCs were isolated from extracted deciduous teeth using the outgrowth method. These cells were exposed to odonto/osteogenic stimuli for 4 and 8 days (Day 4 and Day 8 groups, respectively), while cells in the control group were cultured in normal medium. The in vitro differentiated DTSCs and the control DTSCs were transplanted subcutaneously into immunocompromised mice with macroporous biphasic calcium phosphate and sacrificed at 8 weeks post-implantation. The effect of odonto/osteogenic in vitro differentiation was evaluated using alkaline phosphatase (ALP) staining and quantitative reverse transcription polymerase chain reaction (RT-PCR). The in vivo effect was evaluated by qualitative RT-PCR, assessment of ALP activity, histologic analysis, and immunohistochemical staining. The amount of hard tissue was greater in Day 4 group than Day 8 group (p = 0.014). However, Day 8 group generated lamellar bone-like structure, which was immunonegative to anti-human dentin sialoprotein with significantly low expression level of DSPP compared with the control group (p = 0.008). This study demonstrates that odonto/osteogenic in vitro differentiation of DTSCs enhances the formation of bone-like tissue, instead of dentin-like tissue, when transplanted subcutaneously using MBCP as a carrier. The odonto/osteogenic in vitro differentiation of DTSCs may be an effective modification that enhances in vivo bone formation by DTSCs.

Retention of fissure sealants using two different methods of application in teeth with hypomineralised molars (MIH): a 4 year clinical study.

PubMed

Lygidakis, N A; Dimou, G; Stamataki, E

2009-12-01

This was to evaluate the retention rate of fissure sealants applied to MIH molars with occlusal enamel opacities, using two different application methods after 4 years. 54 children exhibiting molars with MIH aged 6-7 years, participated in the study. presence of at least 2 fully erupted caries-free maxillary or mandibular first permanent molars in the opposite sides of the mouth, both with occlusal enamel opacities without breakdown. Following parental consent, sealants were applied using a half-mouth experimental design. Group A: On a randomly assigned first molar on one side of the mouth sealants Fissurit were placed using a single bottle adhesive system (One-step prior to sealant application. Group B: Sealants were applied on the contra-lateral molar using the conventional etch and seal technique. Children were seen biannually when a preventive program was applied, without replacing any lost sealant. After 4 years, 47 sets of molars (94 teeth) were available for blind evaluation. Teeth in Group A presented a better retention rate; 70.2% were fully sealed, 29.7% partly sealed and none unsealed (lost sealant). Group B revealed 25.5% fully sealed, 44.6% partly sealed and 29.7% unsealed teeth. Differences between groups A and B were statistically significant (p<0.001). Also both groups revealed a decreasing retention rate over the 4-year period (p<0.001). There was no difference in dental caries increment rate and enamel breakdowns at the end of the study (p>0.01). In hypomineralised molars with occlusal opacities sealants appear to have greater retention when applied using 5th generation adhesive systems prior to sealant.

Common developmental pathways link tooth shape to regeneration

PubMed Central

Fraser, Gareth J.; Bloomquist, Ryan F.; Streelman, J. Todd

2013-01-01

In many non-mammalian vertebrates, adult dentitions result from cyclical rounds of tooth regeneration wherein simple unicuspid teeth are replaced by more complex forms. Therefore and by contrast to mammalian models, the numerical majority of vertebrate teeth develop shape during the process of replacement. Here, we exploit the dental diversity of Lake Malawi cichlid fishes to ask how vertebrates generally replace their dentition and in turn how this process acts to influence resulting tooth morphologies. First, we used immunohistochemistry to chart organogenesis of continually replacing cichlid teeth and discovered an epithelial down-growth that initiates the replacement cycle via a labial proliferation bias. Next, we identified sets of co-expressed genes from common pathways active during de novo, lifelong tooth replacement and tooth morphogenesis. Of note, we found two distinct epithelial cell populations, expressing markers of dental competence and cell potency, which may be responsible for tooth regeneration. Related gene sets were simultaneously active in putative signaling centers associated with the differentiation of replacement teeth with complex shapes. Finally, we manipulated targeted pathways (BMP, FGF, Hh, Notch, Wnt/β-catenin) in vivo with small molecules and demonstrated dose-dependent effects on both tooth replacement and tooth shape. Our data suggest that the processes of tooth regeneration and tooth shape morphogenesis are integrated via a common set of molecular signals. This linkage has subsequently been lost or decoupled in mammalian dentitions where complex tooth shapes develop in first generation dentitions that lack the capacity for lifelong replacement. Our dissection of the molecular mechanics of vertebrate tooth replacement coupled to complex shape pinpoints aspects of odontogenesis that might be re-evolved in the lab to solve problems in regenerative dentistry. PMID:23422830

To explore and develop a model to maintain and build upon a dental clinic open for all in developing regions, with a primary focus on India.

PubMed

Sugandhi, Ayushi; Mangal, Brijesh; Mishra, Amit Kumar; Sethia, Bhavna

2014-09-16

To study a service model that enables a clinic to be open to all members of the community, irrespective of their ability to pay. Sampling methodology was used to gather information in two phases, with the city of Indore as the target region. In the first phase, dental professionals were surveyed to gather the cost of the facility, land and equipment and the cost of sustaining the practice. In the second phase, the residents of Indore were surveyed to collect information regarding their oral health problems and their expenditure for the same. Assessing the current situation, the questions to answer are related to the issues of dental health care access problems and the resources required, human and financial. (1) People younger than 20 years of age form a large proportion (43%) of the population of the city and also a large proportion (54%) of people who visit dental clinics; (2) Dental caries are commonly found in the population younger than 20 years of age and mobile teeth in those older than 50 years of age; (3) Dental caries and mobile teeth are almost equally found in people of the age group 20-50 years old; (4) A significantly large proportion of those older than 50 years old have had all their teeth extracted; and (5) A significantly large proportion of the 20-30 years of age group has had no teeth extracted. The model which we propose works well for low income patients; however, it places a lot of extra burden on the higher income group. A lot of effort can be put into generating revenue from other sources, including events and donations.

Clinical Characteristics of Abutment Teeth with Gingival Discoloration.

PubMed

Ristic, Ljubisa; Dakovic, Dragana; Postic, Srdjan; Lazic, Zoran; Bacevic, Miljana; Vucevic, Dragana

2017-04-06

The grey-bluish discoloration of gingiva (known as "amalgam tattoo") does not appear only in the presence of amalgam restorations. It may also be seen in cases of teeth restored with cast dowels and porcelain-fused-to-metal (PFM) restorations. The aim of this article was to determine the clinical characteristics of abutment teeth with gingival discoloration. This research was conducted on 25 patients referred for cast dowel and PFM restorations. These restorations were manufactured from Ni-Cr alloys. Ninety days after cementing the fixed prosthodontic restorations, the abutment teeth (n = 61) were divided into a group with gingival discoloration (GD) (n = 25) and without gingival discoloration (NGD) (n = 36). The control group (CG) comprised the contralateral teeth (n = 61). Plaque index, gingival index, clinical attachment level, and probing depth were assessed before fabrication and also 90 days after cementation of the PFM restorations. The gingival index, clinical attachment level, and probing depths of the abutment teeth that had GD were statistically higher before restoration, in comparison with the abutment teeth in the NGD and control groups. Ninety days after cementation, the abutment teeth with GD had significantly lower gingival indexes and probing depths, compared to the abutment teeth in the NGD group. Both abutment teeth groups (GD and NGD) had significantly higher values of clinical attachment levels when compared to the control group. There were no statistically significant differences in plaque index values between the study groups. The results of this study indicated that impairment of periodontal status of abutment teeth seemed to be related to the presence of gingival discolorations. Therefore, fabrication of fixed prosthodontic restorations requires careful planning and abutment teeth preparation to minimize the occurrence of gingival discolorations. With careful preparation of abutment teeth for cast dowels and crown restorations it may be possible to decrease the frequency of gingival discolorations adjacent to abutment teeth. © 2017 by the American College of Prosthodontists.

A novel mutation of adenomatous polyposis coli (APC) gene results in the formation of supernumerary teeth.

PubMed

Yu, Fang; Cai, Wenping; Jiang, Beizhan; Xu, Laijun; Liu, Shangfeng; Zhao, Shouliang

2018-01-01

Supernumerary teeth are teeth that are present in addition to normal teeth. Although several hypotheses and some molecular signalling pathways explain the formation of supernumerary teeth, but their exact disease pathogenesis is unknown. To study the molecular mechanisms of supernumerary tooth-related syndrome (Gardner syndrome), a deeper understanding of the aetiology of supernumerary teeth and the associated syndrome is needed, with the goal of inhibiting disease inheritance via prenatal diagnosis. We recruited a Chinese family with Gardner syndrome. Haematoxylin and eosin staining of supernumerary teeth and colonic polyp lesion biopsies revealed that these patients exhibited significant pathological characteristics. APC gene mutations were detected by PCR and direct sequencing. We revealed the pathological pathway involved in human supernumerary tooth development and the mouse tooth germ development expression profile by RNA sequencing (RNA-seq). Sequencing analysis revealed that an APC gene mutation in exon 15, namely 4292-4293-Del GA, caused Gardner syndrome in this family. This mutation not only initiated the various manifestations typical of Gardner syndrome but also resulted in odontoma and supernumerary teeth in this case. Furthermore, RNA-seq analysis of human supernumerary teeth suggests that the APC gene is the key gene involved in the development of supernumerary teeth in humans. The mouse tooth germ development expression profile shows that the APC gene plays an important role in tooth germ development. We identified a new mutation in the APC gene that results in supernumerary teeth in association with Gardner syndrome. This information may shed light on the molecular pathogenesis of supernumerary teeth. Gene-based diagnosis and gene therapy for supernumerary teeth may become available in the future, and our study provides a high-resolution reference for treating other syndromes associated with supernumerary teeth. © 2017 The Authors. Journal of Cellular and Molecular Medicine published by John Wiley & Sons Ltd and Foundation for Cellular and Molecular Medicine.

Iron deposition in modern and archaeological teeth

NASA Astrophysics Data System (ADS)

Williams, A.-M. M.; Siegele, R.

2014-09-01

Iron surface concentrations and profile maps were measured on the enamel of archaeological and modern teeth to determine how iron is deposited in tooth enamel and if it was affected by the post-mortem environment. Teeth from Australian children who died in the second half of the 19th century were compared with contemporary teeth extracted for orthodontic purposes. Surface analysis of the teeth was performed using the 3 MV Van Der Graff Accelerator at The Australian Nuclear Science and Technology Organisation (ANSTO), Sydney, Australia. A small sample of teeth were then cut in the mid sagittal plane and analysed using ANSTO High Energy Heavy Ion Microprobe. Maps and linear profiles were produced showing the distribution of iron across the enamel. Results show that both the levels and distribution of iron in archaeological teeth is quite different to contemporary teeth, raising the suggestion that iron has been significantly altered by the post-mortem environment.

[Clinical application of IPS-empress 2 pressable all-ceramic crowns].

PubMed

Wang, Ai-jun; He, Xiao-ming; Liu, Li-xia; Zhang, Chao-biao; Zhang, Min; Shen, Bei-yong

2007-02-01

To evaluate the clinical prosthetic effect of IPS-Empress 2 pressahie ceramic crowns. 198 teeth of 70 patients were restored with IPS-Empress 2 pressahie ceramic crowns. The patients were asked to return in one week and every half year. The clinical prosthetic effect was evaluated. Through follow-up of 3-38 months, the veneer porcelain crowns of 3 teeth were broken. 2 crowns fall off due to teeth fracture, gingivitis occurred in 2 teeth, pulpitis or periapical periodontitis occurred in 3 teeth. The shades of 3 crowns were darkening. The prosthetic effect of 185 teeth was satisfied. The rate of satisfaction was 93.4%. IPS-Empress 2 pressable all-ceramic crown has the advantages of aesthetic effect, good hiocompatihility and simple fabrication. But its strength is not enough for posterior teeth and it can not cover the deep color of non-vital teeth and metal materials.

The epidemiology of supernumerary teeth and the associated molecular mechanism

PubMed Central

Lu, Xi; Yu, Fang; Liu, Junjun; Cai, Wenping; Zhao, Yumei; Zhao, Shouliang; Liu, Shangfeng

2017-01-01

ABSTRACT Supernumerary teeth are common clinical dental anomalies. Although various studies have provided abundant information regarding genes and signaling pathways involved in tooth morphogenesis, which include Wnt, FGF, BMP, and Shh, the molecular mechanism of tooth formation, especially for supernumerary teeth, is still unclear. In the population, some cases of supernumerary teeth are sporadic, while others are syndrome-related with familial hereditary. The prompt and accurate diagnosis of syndrome related supernumerary teeth is quite important for some distinctive disorders. Mice are the most commonly used model system for investigating supernumerary teeth. The upregulation of Wnt and Shh signaling in the dental epithelium results in the formation of multiple supernumerary teeth in mice. Understanding the molecular mechanism of supernumerary teeth is also a component of understanding tooth formation in general and provides clinical guidance for early diagnosis and treatment in the future. PMID:28598258

An overlay partial denture to restore worn mandibular anterior teeth.

PubMed

Samant, Asha; DeSciscio, Peter

2014-01-01

Restoring worn anterior mandibular teeth is a challenge, especially when teeth are small, esthetics are a concern, the long-term prognosis is questionable, and/or patient finances are an issue. This article describes an alternate treatment for a patient with a collapsed bite, missing posterior mandibular teeth, an ill-fitting complete maxillary denture with poor esthetics, and irregular, worn mandibular anterior teeth.

Generation of Werner states and preservation of entanglement in a noisy environment [rapid communication

NASA Astrophysics Data System (ADS)

Jakóbczyk, Lech; Jamróz, Anna

2005-12-01

We study the influence of noisy environment on the evolution of two-atomic system in the presence of collective damping. Generation of Werner states as asymptotic stationary states of evolution is described. We also show that for some initial states the amount of entanglement is preserved during the evolution.

Comparison of the microhardness of primary and permanent teeth after immersion in two types of carbonated beverages

PubMed Central

Haghgou, Hamid R.; Haghgoo, Roza; Asdollah, Fatemah Molla

2016-01-01

Objectives: The consumption of carbonated beverages is one of the etiological factors that cause dental erosion. The purpose of this research was to compare changes in the microhardness of permanent and primary teeth after immersion in two types of carbonated beverages. Materials and Methods: This investigation was done on 30 healthy permanent molars and 30 healthy primary canines. Each group of primary and permanent teeth was subdivided into three groups of 10 teeth. The teeth was immersed in 40 ml of each of the three beverages for 5 min. One subgroup was immersed in water (as a control). The next was immersed in Lemon Delster and the last subgroup was immersed in Coca-Cola. The microhardness of enamel was measured using the Vickers method before and after immersion. Finally, the data was analyzed by paired t-test, one-way analysis of variance, and t-test. Results: Microhardness reduction in the primary teeth was significant in both the Lemon Delster and Coca-Cola groups (P < 0.05). This reduction was also statistically significant in the permanent teeth (P < 0.05). A comparison of the enamel changes in the primary teeth with permanent teeth after immersion in both beverages showed a greater microhardness reduction in the primary teeth in both the experimental groups. Conclusions: Coca-Cola and Lemon Delster caused a significant reduction of microhardness in tooth enamel. This reduction was greater in primary teeth than in permanent teeth, and was also greater after immersion in Coca-Cola than after immersion in Lemon Delster. PMID:27583223

Stress analysis of different post-luting systems: a three-dimensional finite element analysis.

PubMed

Romeed, S A; Dunne, S M

2013-03-01

The longevity of endodontically treated teeth is usually determined by the adequacy of root canal treatments, coronal seal and favourable stress distribution within the remaining tooth tissues. The aim of this study was to investigate the influence of post material and luting cement on the biomechanics of endodontically treated teeth using three-dimensional finite element analysis (3-D FEA). A 3 mm section of endodontically treated canine tooth was scanned and reconstructed for 3-D modelling and FE analyses. A metal post (MP) and a glass fibre post (GFP) were tested individually with four luting cements [zinc phosphate (ZPH), glass ionomer (GI), resin modified glass ionomer (RMGI) and resin based cements (RC)]. A push-out test was conducted by subjecting all models to 100 N perpendicular loading at the post. The maximum stresses generated along the MP-cement interface were significantly higher than corresponding stresses in the GFP-cement interface regardless of the cement type. GFP generated seven times higher stresses within the root dentine than metal posts when ZPH and GI were used, and three times higher when RMGI and RC were used. The displacement of GFP was double (50 μ) the displacement of MP (20 μ) in all groups. The low elastic modulus of GFP generated lower stresses along its interface and higher stresses within the root dentine, therefore the probability of debonding and root fracture in the GFP group was lower. © 2013 Australian Dental Association.

Non-masticatory uses of anterior teeth of Sima de los Huesos individuals (Sierra de Atapuerca, Spain).

PubMed

Lozano, Marina; Bermúdez de Castro, José M; Carbonell, Eudald; Arsuaga, Juan Luis

2008-10-01

In this study we examine the labial and occlusal surfaces of incisors and canines of hominins recovered from the Sima de los Huesos (SH), middle Pleistocene site, in order to establish the possible extra-masticatory use of anterior teeth. We have compared the microwear of these fossils with microwear from the anterior teeth of Australian Aborigines, a population characterized by ethnographic evidence of the use of their teeth as a third hand. These two samples of teeth were microscopically analyzed using Scanning Electron Microscopy (SEM). Our results support the "cultural" origin of microwear observed on fossil teeth: we conclude that the SH hominins used their anterior teeth as a "third hand" for para- or extra-masticatory activities.

Single-visit endodontic treatment of mature teeth with chronic apical abscesses using mineral trioxide aggregate cement: a randomized clinical trial.

PubMed

Alsulaimani, Reem Siraj

2016-08-23

Mature teeth with chronic apical abscesses characterized by intermittent discharge of pus through an associated sinus tract. This communication between oral mucosa and periapical inflammation is challenging for the sealing ability of root canal obturation material. Therefore, the study aim was to compare the outcomes of endodontic treatment using mineral trioxide aggregate (MTA) cement to the conventional gutta-percha cone and root canal sealer as an obturation material in mature teeth with chronic apical abscesses. Mature teeth with chronic apical abscesses referred to our clinic for root canal treatment between 2010 and 2012 were treated in a single visit and distributed among treatment (T) and control (C) groups using a predetermined randomization block (TCTC). After chemo-mechanical preparation, teeth in group T received MTA cement mixed in a 0.26 water to powder ratio, and teeth group C received gutta-percha and root canal sealer using the warm vertical technique. The treatment outcomes were defined as obturation length, periapical healing, resorption of extruded material, and survival rate at least 2.5 years after treatment. Three endodontists blinded to the type of obturation material documented treatment outcomes. Statistical analysis at P < 0.05 was conducted to measure difference between the groups. Thirty-six teeth were treated between 2010 and 2012, and 32 teeth were evaluated in 2015. Complete periapical healing was observed in 87.5 % of MTA-treated teeth and 75.0 % of gutta-percha-treated teeth. Adequate obturation length was reported in 50.0 % of MTA-treated and 37.5 % of gutta-percha-treated teeth. Complete resorption of extruded material was evident in 83.3 % MTA-treated teeth and 100.0 % gutta-percha-treated teeth. The survival rate of MTA-treated teeth was 100 % at 3, and 5 years, while the survival rate of gutta-percha-treated teeth was 83.3 % at 3, and 5 years. There was no significant difference between the groups in term of periapical healing, survival rate, obturation length, or resorption of extruded material. The outcomes of single-visit endodontic treatment of mature teeth with chronic apical abscesses using MTA cement were better, but not statistically significant, compared to conventional treatment. ISRCTN15285974 . Registered retrospectively 23 June 2015.

Histobacteriologic Conditions of the Apical Root Canal System and Periapical Tissues in Teeth Associated with Sinus Tracts.

PubMed

Ricucci, Domenico; Loghin, Simona; Gonçalves, Lucio S; Rôças, Isabela N; Siqueira, José F

2018-03-01

This histobacteriologic study described the pattern of intraradicular and extraradicular infections in teeth with sinus tracts and chronic apical abscesses. The material comprised biopsy specimens from 24 (8 untreated and 16 treated) roots of teeth associated with apical periodontitis and a sinus tract. Specimens were obtained by periradicular surgery or extraction and were processed for histobacteriologic and histopathologic methods. Bacteria were found in the apical root canal system of all specimens, in the main root canal (22 teeth) and within ramifications (17 teeth). Four cases showed no extraradicular infection. Extraradicular bacteria occurred as a biofilm attached to the outer root surface in 17 teeth (5 untreated and 12 treated teeth), as actinomycotic colonies in 2 lesions, and as planktonic cells in 2 lesions. Extraradicular calculus formation (mineralized biofilm) was evident in 10 teeth. Teeth with chronic apical abscesses and sinus tracts showed a very complex infectious pattern in the apical root canal system and periapical lesion, with a predominance of biofilms. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Mouth and Teeth: How To Keep Them Healthy

MedlinePlus

... and Wellness Staying Healthy Healthy Living Mouth and Teeth: How to Keep Them Healthy Mouth and Teeth: How to Keep Them Healthy Share Print Taking good care of your mouth and teeth throughout your whole life can help prevent problems ...

[Research on the designing method of a special shade guide for tooth whitening].

PubMed

Xu, Yingxin

2015-10-01

To investigate a method of designing an accurate and scientific shade guide, especially used for judging the effect of tooth whitening, by analyzing the colorimetric values of discolored teeth statistically. One hundred thirty-six pictures of patients who had been receiving the Beyond cold light whitening treatment from February 2009 to July 2014 were analyzed, including 25 tetracycline teeth, 61 mottled-enamel teeth, and 50 yellow teeth. The colorimetric values of discolored teeth were measured. The L* values of shade tabs were calculated by hierarchical clustering of those of discolored teeth. The a* and b* values of shade tabs were the mean of those observed for discolored teeth. Accordingly, different shade guides were designed for each type of discolored teeth, and the effects were evaluated. A statistically significant difference in colorimetric values was found among the three types of discolored teeth. Compared with the Vitapan Classical shade guide, the shade guides designed through the present method were more scientific and accurate in judging the effect of tooth whitening. Moreover, the arrangement of shade tabs was more logical, and the color difference between shade tabs and discolored teeth was smaller. The proposed designing method is theoretically feasible, although its clinical effect has yet to be proven.

Manipulation of Fgf and Bmp signaling in teleost fishes suggests potential pathways for the evolutionary origin of multicuspid teeth

PubMed Central

Jackman, William R; Davies, Shelby H; Lyons, David B; Stauder, Caitlin K; Denton-Schneider, Benjamin R; Jowdry, Andrea; Aigler, Sharon R; Vogel, Scott A; Stock, David W

2014-01-01

Teeth with two or more cusps have arisen independently from an ancestral unicuspid condition in a variety of vertebrate lineages, including sharks, teleost fishes, amphibians, lizards, and mammals. One potential explanation for the repeated origins of multicuspid teeth is the existence of multiple adaptive pathways leading to them, as suggested by their different uses in these lineages. Another is that the addition of cusps required only minor changes in genetic pathways regulating tooth development. Here we provide support for the latter hypothesis by demonstrating that manipulation of the levels of Fibroblast growth factor (Fgf) or Bone morphogenetic protein (Bmp) signaling produces bicuspid teeth in the zebrafish (Danio rerio), a species lacking multicuspid teeth in its ancestry. The generality of these results for teleosts is suggested by the conversion of unicuspid pharyngeal teeth into bicuspid teeth by similar manipulations of the Mexican Tetra (Astyanax mexicanus). That these manipulations also produced supernumerary teeth in both species supports previous suggestions of similarities in the molecular control of tooth and cusp number. We conclude that despite their apparent complexity, the evolutionary origin of multicuspid teeth is positively constrained, likely requiring only slight modifications of a pre-existing mechanism for patterning the number and spacing of individual teeth. PMID:25098636

Manipulation of Fgf and Bmp signaling in teleost fishes suggests potential pathways for the evolutionary origin of multicuspid teeth.

PubMed

Jackman, William R; Davies, Shelby H; Lyons, David B; Stauder, Caitlin K; Denton-Schneider, Benjamin R; Jowdry, Andrea; Aigler, Sharon R; Vogel, Scott A; Stock, David W

2013-01-01

Teeth with two or more cusps have arisen independently from an ancestral unicuspid condition in a variety of vertebrate lineages, including sharks, teleost fishes, amphibians, lizards, and mammals. One potential explanation for the repeated origins of multicuspid teeth is the existence of multiple adaptive pathways leading to them, as suggested by their different uses in these lineages. Another is that the addition of cusps required only minor changes in genetic pathways regulating tooth development. Here we provide support for the latter hypothesis by demonstrating that manipulation of the levels of Fibroblast growth factor (Fgf) or Bone morphogenetic protein (Bmp) signaling produces bicuspid teeth in the zebrafish (Danio rerio), a species lacking multicuspid teeth in its ancestry. The generality of these results for teleosts is suggested by the conversion of unicuspid pharyngeal teeth into bicuspid teeth by similar manipulations of the Mexican Tetra (Astyanax mexicanus). That these manipulations also produced supernumerary teeth in both species supports previous suggestions of similarities in the molecular control of tooth and cusp number. We conclude that despite their apparent complexity, the evolutionary origin of multicuspid teeth is positively constrained, likely requiring only slight modifications of a pre-existing mechanism for patterning the number and spacing of individual teeth. © 2013 Wiley Periodicals, Inc.

A 12-Year Retrospective Study of Avulsion Cases in a Public Brazilian Dental Trauma Service.

PubMed

Mesquita, Gabriela Campos; Soares, Priscilla Barbosa Ferreira; Moura, Camilla Christian Gomes; Roscoe, Marina Guimarães; Paiva, Saul Martins; Soares, Carlos José

2017-01-01

This study assessed the epidemiological characteristics and management of the permanent teeth avulsion cases attended in a Brazilian dental trauma service from December 2005 to August 2016. A retrospective study was conducted of case records of 93 patients involving 139 avulsed teeth. Data included sex, age, trauma etiology, location of the accident, number and position of avulsed teeth, and presence and type of associated traumatic lesions. Management of the avulsed teeth was addressed as: time elapsed until teeth were retrieved from the accident's location; teeth's cleaning method and storage media; time elapsed until seeking treatment and replantation. The majority of the patients were children from 6-10 (31.2%) and 11-15 years old (26.9%). Male patients were more affected than female. Bicycle accident was the main etiological factor (31.2%). In 56 (60.2%) cases, traumatic lesions to neighboring teeth were present. In 55 (59.1%) cases, lesions to adjacent soft tissues were reported. In 82 (88.2%) cases, patients requested treatment at the same day of the accident. Sixty-four teeth (46.0%) were immediately retrieved and 28 (20.1%) were not found. Forty-two teeth (30.2%) were kept dry. Only one tooth (0.7%) was immediately replanted at the accident's site, while 51 teeth (36.7%) were not replanted. Numerous avulsed teeth were inappropriately managed and immediate replantation was not frequent. Public policies must be created to raise awareness towards the particularities of avulsion cases.

Characteristics of dental pulp in human upper first premolar teeth based on immunohistochemical and morphometric examinations.

PubMed

Tomaszewska, Joanna Maria; Miskowiak, Bogdan; Matthews-Brzozowska, Teresa; Wierzbicki, Piotr

2013-01-01

Teeth extracted for orthodontic reasons are commonly considered as healthy. Therefore, it is possible to examine structure of the dental pulp can be fully recognized and how it is affected by malocclusion. The aim of the study was to evaluate by immunohistochemistry (IHC) and morphometry dental pulp in human upper first premolar teeth extracted for orthodontic reasons. The material comprised 36 teeth of 20 patients in the age range 16-26 years. By the use of IHC markers the presence of immunocompetent cells (CD20, CD45RO, and CD68), blood vessels (CD31) and nerves (PGP9.5) were examined in the pulp. Inflammatory infiltrates and tissue atrophy were observed in 24 and 10 teeth, respectively. Strong positive correlation between the width of the odontoblastic layer, the number of rows of odontoblast nuclei and the increase of MVA (microvessel area) in the pulp of atrophic teeth was found. The cellular infiltrations found in H&E-stained sections were identified by IHC as memory T cells (CD45RO+) and B lymphocytes (CD20+) with macrophages (CD68+) present at the periphery. The CD20 antigen was intensively expressed in 13 teeth, CD45RO in 33 teeth, and CD68 in 20 teeth. Thus, despite the lack of any clinical signs of pulp disease many teeth extracted for orthodontic reasons show focal pulp inflammation and atrophy which probably results from the malocclusion stress accompanying teeth crowding.

Prevalence of crown trauma in free-ranging maned wolves (Chrysocyon brachyurus) in central Brazil.

PubMed

Furtado, Mariana Malzoni; Kashivakura, Cyntia Kayo; Ferro, Claudia; Jácomo, Anah Tereza de Almeida; Silveira, Leandro; Astete, Samuel; Lopes, Fernanda Maria

2007-12-01

Nineteen free-ranging maned wolves (Chrysocyon brachyurus) were captured in central Brazil from April through November 2003. Oral cavity examination revealed 34 teeth with crown trauma in twelve animals. Canine teeth were most commonly affected (44.2%), followed by premolar (29.4%) and incisor teeth (26.5%). Trauma to maxillary teeth (67.7%) was more frequent compared with mandibular teeth (32.3 %). The majority of dental fractures were located at the cuspid portion of the crown (56.0%). Slab fractures were the most frequent type (37.0%), followed by horizontal (24.0%), oblique (24.0%) and longitudinal fractures (15.0%). Complicated crown fracture (pulp exposure) was diagnosed in 13 (38.2%) of these teeth while pulpitis noted by tooth discoloration was diagnosed in 8 (23.5%) teeth.

Biomechanical evaluation of the natural abutment teeth in combined tooth-implant-supported telescopic prostheses: a three-dimensional finite element analysis.

PubMed

Chen, Yu; Wang, Chao; Huang, Yuanding; Feng, Tianming; Zou, Huawei; Fan, Yubo

2017-07-01

Telescopic overdentures supported by the combination of natural teeth and implants have been thought a valuable treatment for the severely compromised partially edentulous patients. But the combination of teeth and implants involves highly complex biomechanical problems. This study is to evaluate biomechanical behaviors of the natural abutment teeth with the treatment of combined tooth-implant supported telescopic crown prostheses in mandible through 3D FEA. According to this study, the prosthetic option supported by a combination of teeth and implants and retained by double crowns could protect teeth and their periodontal support tissues acting as a rigid splint, and may be a valuable treatment option for partially edentulous patients with severely reduced remaining teeth in mandible.

Association Between Missing Posterior Teeth and Occurrence of Temporomandibular Joint Condylar Erosion: A Cone Beam Computed Tomography Study.

PubMed

Bertram, Felix; Hupp, Linus; Schnabl, Dagmar; Rudisch, Ansgar; Emshoff, Rüdiger

To determine a possible association between asymptomatic temporomandibular joint (TMJ) condylar erosion and the number of missing posterior teeth and their location, as well as the number of dental quadrants with missing posterior teeth. This case-control study involved 210 patients (male to female ratio = 98:112) aged 16-74 years, with 105 asymptomatic patients with TMJ condylar erosion and a control group of 105 patients without TMJ condylar erosion. Cone beam computed tomography images were evaluated to classify the severity of TMJ condylar erosion as grade 0 (absence of erosion), grade I (slight erosion), grade II (moderate erosion), or grade III (extensive erosion). The number of missing posterior teeth (mean ± standard deviation [SD]; 2.7 ± 2.4 vs 0.7 ± 1.2) (P < .001), number of dental quadrants with missing posterior teeth (1.5 ± 1.3 vs 0.6 ± 0.9) (P < .001), and bilateral location of missing posterior teeth (41 ± 39.0 vs 10 ± 9.5) (P < .001) were all significantly higher in patients with erosion than in those without erosion. The condylar erosion grade was significantly associated with the number of missing posterior teeth (odds ratio [OR] = 1.24; P = .006), the number of dental quadrants with missing posterior teeth (OR = 1.36; P = .006), and the bilateral occurrence of missing posterior teeth (OR = 3.03; P = .002). The findings from this study suggest a possible association between TMJ condylar erosion grades and the number of missing posterior teeth, the number of quadrants with missing posterior teeth, and the bilateral occurrence of missing posterior teeth.

External root resorption during orthodontic treatment in root-filled teeth and contralateral teeth with vital pulp: A clinical study of contributing factors.

PubMed

Lee, Yun Ju; Lee, Tae Yeon

2016-01-01

There is a lack of research to support the belief that root canal treatment can be considered for stopping or decreasing external apical root resorption (EARR). There is conflicting evidence as to whether root-filled teeth are more or less likely to experience EARR after orthodontic treatment. The purpose of this study was to compare the degree of EARR of root-filled teeth with that of contralateral teeth with vital pulp after fixed orthodontic treatment. The study sample consisted of 35 patients aged 25.23 ± 4.92 years who had at least 1 root-filled tooth before orthodontic treatment. Digital panoramic radiographs of each patient taken before and after orthodontic treatment were used to measure the EARR. The Student t test for matched pairs and the Pearson correlation analysis were applied. The mean EARR values were 0.22 (0.14, 0.35) for root-filled teeth and 0.87 (0.59, 1.31) for contralateral teeth with vital pulp, indicating significantly less EARR for root-filled teeth compared with the contralateral teeth with vital pulp after orthodontic treatment. EARR was influenced by the patient's age, treatment duration, treatment type, and periapical pathosis, but not by tooth type and sex. Root-filled teeth appear to be associated with significantly less EARR than are contralateral teeth with vital pulp. This study suggests that the possible complication of EARR in root-filled teeth may not be an important consideration in orthodontic treatment planning, and root canal treatment can be considered for stopping or decreasing EARR when severe EARR occurs during orthodontic treatment. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Influence of handling-relevant factors on the behaviour of a novel calculus-detection device.

PubMed

Meissner, Grit; Oehme, Bernd; Strackeljan, Jens; Kocher, Thomas

2005-03-01

The aim of periodontal therapy is always the complete debridement of root surfaces with the removal of calculus and without damaging cementum. We have recently demonstrated the feasibility of a surface recognition device that discriminates dental surfaces by mathematical analysis of reflected ultrasound waves. This principle should enable the construction of calculus detecting ultrasonic device. Pre-clinical test results are presented here. An impulse generator, coupled to a conventional piezo-driven ultrasonic scaler, sends signals to the cementum via the tip of an ultrasound device. The oscillation signal reflected from the surface contains the information necessary to analyse its characteristics. In order to discriminate different surfaces, learning sets were generated from 70 extracted teeth using standardized tip angle/lateral force combinations. The complete device was then used to classify root surfaces unknown to the system. About 80% of enamel and cementum was correctly identified in vivo (sensitivity: 75%, specificity: 82%). The surface discrimination method was not influenced by the application conditions examined. A new set of 200 tests on 10 teeth was correctly recognized in 82% of the cases (sensitivity: 87%, specificity: 76%). It was shown in vitro that the tooth surface recognition system is able to function correctly, independent of the lateral forces and the tip angle of the instrument. Copyright 2005 Blackwell Munksgaard.

Gears Based on Carbon Nanotubes

NASA Technical Reports Server (NTRS)

Jaffe, Richard; Han, Jie; Globus, Al; Deardorff, Glenn

2005-01-01

Gears based on carbon nanotubes (see figure) have been proposed as components of an emerging generation of molecular- scale machines and sensors. In comparison with previously proposed nanogears based on diamondoid and fullerene molecules, the nanotube-based gears would have simpler structures and are more likely to be realizable by practical fabrication processes. The impetus for the practical development of carbon-nanotube- based gears arises, in part, from rapid recent progress in the fabrication of carbon nanotubes with prescribed diameters, lengths, chiralities, and numbers of concentric shells. The shafts of the proposed gears would be made from multiwalled carbon nanotubes. The gear teeth would be rigid molecules (typically, benzyne molecules), bonded to the nanotube shafts at atomically precise positions. For fabrication, it may be possible to position the molecular teeth by use of scanning tunneling microscopy (STM) or other related techniques. The capability to position individual organic molecules at room temperature by use of an STM tip has already been demonstrated. Routes to the chemical synthesis of carbon-nanotube-based gears are also under investigation. Chemical and physical aspects of the synthesis of molecular scale gears based on carbon nanotubes and related molecules, and dynamical properties of nanotube- based gears, have been investigated by computational simulations using established methods of quantum chemistry and molecular dynamics. Several particularly interesting and useful conclusions have been drawn from the dynamical simulations performed thus far: The forces acting on the gears would be more sensitive to local molecular motions than to gross mechanical motions of the overall gears. Although no breakage of teeth or of chemical bonds is expected at temperatures up to at least 3,000 K, the gears would not work well at temperatures above a critical range from about 600 to about 1,000 K. Gear temperature could probably be controlled by use of coolant gases. For a given application, the gears would work well at temperatures below the critical range, provided that the rotational energy was less than the energy required to tilt the teeth through an angle of 20 . The predominant mechanism of gear failure would be slippage caused by tilting of teeth. Gears would resume functioning if the slipping gears were decelerated sufficiently.

Evaluation of the Self-Adjusting File system (SAF) for the instrumentation of primary molar root canals: a micro-computed tomographic study.

PubMed

Kaya, E; Elbay, M; Yiğit, D

2017-06-01

The Self-Adjusting File (SAF) system has been recommended for use in permanent teeth since it offers more conservative and effective root-canal preparation when compared to traditional rotary systems. However, no study had evaluated the usage of SAF in primary teeth. The aim of this study was to evaluate and compare the use of SAF, K file (manual instrumentation) and Profile (traditional rotary instrumentation) systems for primary-tooth root-canal preparation in terms of instrumentation time and amounts of dentin removed using micro-computed tomography (μCT) technology. Study Design: The study was conducted with 60 human primary mandibular second molar teeth divided into 3 groups according to instrumentation technique: Group I: SAF (n=20); Group II: K file (n=20); Group III; Profile (n=20). Teeth were embedded in acrylic blocks and scanned with a μCT scanner prior to instrumentation. All distal root canals were prepared up to size 30 for K file,.04/30 for Profile and 2 mm thickness, size 25 for SAF; instrumentation time was recorded for each tooth, and a second μCT scan was performed after instrumentation was complete. Amounts of dentin removed were measured using the three-dimensional images by calculating the difference in root-canal volume before and after preparation. Data was statistically analysed using the Kolmogorov-Smirnov and Kruskal-Wallis tests. Manual instrumentation (K file) resulted in significantly more dentin removal when compared to rotary instrumentation (Profile and SAF), while the SAF system generated significantly less dentin removal than both manual instrumentation (K file) and traditional rotary instrumentation (Profile) (p<.05). Instrumentation time was significantly greater with manual instrumentation when compared to rotary instrumentation (p<.05), whereas instrumentation time did not differ significantly between the Profile and SAF systems. Within the experimental conditions of the present study, the SAF seems as a useful system for root-canal instrumentation in primary molars because it removed less dentin than other systems, which is especially important for the relatively thin-walled canals of primary teeth, and because it involves less clinical time, which is particularly important in the treatment of paediatric patients.

Dentition Status and Treatment Needs among Women involved in Sex Work as a Profession in the Red Light District of Pune, Maharashtra, India: A Cross-sectional Study.

PubMed

Muralidharan, Shrikanth; Acharya, Arun K; Sevekari, Tejaswi; Margabandhu, Shanthi; Rupawat, Divya; Khan, Rehan; Desale, Mandakini

2018-03-01

The overall rehabilitation of women in sex work is unfortunately limited most of the time only to moving them to another profession, but it should be focused on including health as an important factor. Factors that restrict regular dental care include misconceptions, dental fear and expense of dental care, unpleasant dental experiences, and socioeconomic factors, but such a direct correlation cannot be made in the case of such women. Until now, no study has been conducted related to the complete dentition status and treatment needs of women in sex work. The aim of our survey was to evaluate the dentition status and treatment needs among the brothel-based women engaged in sex work. A pilot study was conducted on 30 women and the final sample size was estimated to be 350. All the women were above 18 years old. Systematic random sampling method was followed after line listing of the brothels. The dentition status and treatment needs were recorded using the World Health Organization assessment form, 1997. The data collected were tabulated and analyzed using Statistical Package for the Social Sciences (SPSS), version 16.0. The Chi-squared test was carried out to check the association, and all p-values below 0.05 were considered to be statistically significant. The mean number of decayed teeth per person was 5.05 (±4.81), missing teeth per person was 0.96 ± 2.71, filled teeth per person was 0.04 (±0.34), and the mean of decayed missing filled permanent teeth per person was 6.05 (±5.84). There was a significant association between dental caries and age, using finger to clean the teeth, and not visiting the dentist. Due to different risk factors, such as diet, improper oral hygiene maintenance, and substance abuse, the overall dental health was found to be compromised in this population. Economic burden is an important factor that influences their attitude toward oral health and is likely to be inherited by their next generation also.

Incidence of post-operative pain following single visit endodontics in vital and non-vital teeth: An in vivo study

PubMed Central

Bhagwat, Sumita; Mehta, Deepil

2013-01-01

This clinical study was conducted to compare the post-operative pain following single visit endodontics in vital and non-vital teeth, with and without periapical radiolucency. A total of 60 adult patients requiring root canal therapy in anterior and premolar teeth were selected for this study. Single sitting root canal treatment was carried out and the subjects were recalled after 2 weeks and instructed to fill out a series of self-report questionnaires for responses about pain in the interim after 1 day, 2 day, 3 day, 1 week and 2 weeks. In vital teeth (Group I) 60% of the treated cases had pain, of which 36% had mild pain (non-significant) and 24% had moderate pain (significant). In non-vital teeth without periapical radiolucency (Group II) 64% of cases had pain, of which 48% had mild pain (non-significant) and 16% had moderate pain (significant). In non-vital teeth with periapical radiolucency (Group III) 32% of the cases had pain of which 24% had mild pain (non-significant) and 8% had moderate pain (significant). None of the teeth in any of the groups had severe pain. There was no statistical difference between incidence of pain in vital and non-vital teeth without periapical radiolucency. Non-vital teeth with periapical radiolucency exhibited relatively less pain as compared with non-vital teeth without periapical radiolucency, but the pain continued in a significant percent of teeth even after 2 weeks. Pain incidence dropped significantly within a period of 1 day to 2 weeks in vital teeth and non-vital teeth without periapical radiolucency. There was a tendency for less incidence of significant pain after a single visit root canal treatment in these groups. Results obtained were comparable with those obtained by several investigators. PMID:24124293

Speech-like orofacial oscillations in stump-tailed macaque (Macaca arctoides) facial and vocal signals.

PubMed

Toyoda, Aru; Maruhashi, Tamaki; Malaivijitnond, Suchinda; Koda, Hiroki

2017-10-01

Speech is unique to humans and characterized by facial actions of ∼5 Hz oscillations of lip, mouth or jaw movements. Lip-smacking, a facial display of primates characterized by oscillatory actions involving the vertical opening and closing of the jaw and lips, exhibits stable 5-Hz oscillation patterns, matching that of speech, suggesting that lip-smacking is a precursor of speech. We tested if facial or vocal actions exhibiting the same rate of oscillation are found in wide forms of facial or vocal displays in various social contexts, exhibiting diversity among species. We observed facial and vocal actions of wild stump-tailed macaques (Macaca arctoides), and selected video clips including facial displays (teeth chattering; TC), panting calls, and feeding. Ten open-to-open mouth durations during TC and feeding and five amplitude peak-to-peak durations in panting were analyzed. Facial display (TC) and vocalization (panting) oscillated within 5.74 ± 1.19 and 6.71 ± 2.91 Hz, respectively, similar to the reported lip-smacking of long-tailed macaques and the speech of humans. These results indicated a common mechanism for the central pattern generator underlying orofacial movements, which would evolve to speech. Similar oscillations in panting, which evolved from different muscular control than the orofacial action, suggested the sensory foundations for perceptual saliency particular to 5-Hz rhythms in macaques. This supports the pre-adaptation hypothesis of speech evolution, which states a central pattern generator for 5-Hz facial oscillation and perceptual background tuned to 5-Hz actions existed in common ancestors of macaques and humans, before the emergence of speech. © 2017 Wiley Periodicals, Inc.

Colour stability of denture teeth submitted to different cleaning protocols and accelerated artificial aging.

PubMed

Freire, T S; Aguilar, F G; Garcia, L da Fonseca Roberti; Pires-de-Souza, F de Carvalho Panzeri

2014-03-01

Acrylic resin is widely used for artificial teeth manufacturing due to several important characteristics; however, this material do not present acceptable colour stability over the course of time. This study evaluated the effect of different cleaning protocols and accelerated artificial aging on colour stability of denture teeth made of acrylic resin. Sixty denture teeth in dark and light shades were used, and separated according to the treatment to which they were submitted. Results demonstrated that colour stability of artificial teeth is influenced by the cleaning solution and artificial aging, being dark teeth more susceptible to colour alteration than lighter ones.

Targeted traction of impacted teeth with C-tube miniplates.

PubMed

Chung, Kyu-Rhim; Kim, Yong; Ahn, Hyo-Won; Lee, Dongjoo; Yang, Dong-Min; Kim, Seong-Hun; Nelson, Gerald

2014-09-01

Orthodontic traction of impacted teeth has typically been performed using full fixed appliance as anchorage against the traction force. This conventional approach can be difficult to apply in the mixed dentition if the partial fixed appliance offers an insufficient anchor unit. In addition, full fixed appliance can induce unwanted movement of adjacent teeth. This clinical report presents 3 cases where impacted teeth were recovered in the mixed or transitional dentition with skeletal anchorage on the opposite arch without full fixed appliance. Instead, intermaxillary traction was used to bring the impacted teeth into position. With this approach, side effects on teeth and periodontal tissues adjacent to the impaction were minimized.

Distribution of bacterial morphotypes around natural teeth and titanium implants ad modum Brånemark.

PubMed

Quirynen, M; Listgarten, M A

1990-12-01

The subgingival plaque around both teeth and implants was analysed by means of differential phase-contrast microscopy. It was noted that, in comparison to natural teeth, the subgingival samples from implants were more frequently too small to provide adequate bacterial counts. In 24 partially edentulous patients (with implants and teeth in the same jaw), no significant differences in the distribution of bacterial morphotypes could be found between implants and natural teeth. The %s of coccoid cells, motile rods, spirochetes and other bacteria were 65.8, 2.3, 2.1, and 29.8 for implants and 55.6, 4.9, 3.6, and 34.9 for teeth, respectively. However, when the plaque composition on the implants of fully edentulous patients was compared with those of teeth or implants of partially edentulous patients (with teeth and implants in the same and/or opposite jaw), significant differences appeared. In fully edentulous patients, more coccoid cells (71.3%) and significant fewer motile rods (0.4%) and spirochetes (0.0) were found around the implants. The results suggest that teeth may serve as a reservoir for the bacterial colonisation of titanium implants in the same mouth.

Anesthetic efficacy of the supplemental intraosseous injection for teeth with irreversible pulpitis.

PubMed

Parente, S A; Anderson, R W; Herman, W W; Kimbrough, W F; Weller, R N

1998-12-01

The purpose of this study was to determine the efficacy of a supplemental intraosseous injection (IOI) of 2% lidocaine with 1:100,000 epinephrine using the Stabident device, after conventional anesthetic methods had failed. Patients who experienced pain during endodontic access and required a supplemental IOI using 0.45 to 0.90 ml of the local anesthetic were identified. All 37 of the patients treated had teeth diagnosed with irreversible pulpitis. Thirty-four of the teeth were mandibular posterior teeth, 2 were maxillary posterior teeth, and 1 was a maxillary anterior tooth. Patients with maxillary teeth had received infiltration anesthesia, and those with mandibular teeth had received an inferior alveolar nerve block in conjunction with long buccal infiltration. A minimum of 3.6 ml of local anesthetic was used with the conventional techniques. Modified visual analogue scales, coupled with operator evaluations, were used to measure success. The Stabident IOI was an effective supplemental anesthetic technique in 89% (+/- 5.1) or 33/37 patients evaluated. The 95% confidence interval was 74 to 97%. The IOI was successful in 91% (+/- 4.9) of the mandibular posterior teeth (31/34), and 67% of the maxillary teeth (2/3).

Treatment of Mature Permanent Teeth with Necrotic Pulps and Apical Periodontitis Using Regenerative Endodontic Procedures: A Case Series.

PubMed

Saoud, Tarek Mohamed; Martin, Gabriela; Chen, Yea-Huey M; Chen, Kuang-Liang; Chen, Chao-An; Songtrakul, Kamolthip; Malek, Matthew; Sigurdsson, Asgeir; Lin, Louis M

2016-01-01

Regenerative endodontic procedures (REPs) are usually used to treat human immature permanent teeth with necrotic pulps and/or apical periodontitis. Successful REPs result in the elimination of clinical signs/symptoms, the resolution of apical periodontitis, and, in some cases, thickening of the canal walls and/or continued root development with or without apical closure. REPs can restore the vitality of tissue in the canals of immature permanent teeth previously destroyed by infection or trauma. Vital tissue is inherited with immune defense mechanisms to protect itself from foreign invaders. Recently, REPs have also been used to successfully treat human mature permanent teeth with necrotic pulps and apical periodontitis. The purpose of this case series was to present the potential of using REPs for mature permanent teeth with necrotic pulps and apical periodontitis. This case series consisted of 6 patients, 4 females and 2 males. The patients' ages ranged from 8-21 years old. Seven permanent teeth, 4 anterior and 3 molar teeth, with necrotic pulps and apical periodontitis were treated using REP. Radiographically, the root development of all teeth was almost completed except the apices of 2 molars, which showed slightly open. Complete chemomechanical debridement of the canals of the teeth was performed, and the canals were dressed with Metapaste (Meta Biomed Co, Ltd, Chungbuk, Korea) during treatment visits. Periapical bleeding into the canals was induced at the last treatment visit by placing a hand #20 or #25 K-file with the tip slightly bent through the apical foramina into the periapical tissues. A 3-mm thickness of mineral trioxide aggregate was placed into the coronal canals over semicoagulated blood. The access cavities were restored with either composite resin or amalgam. Follow-ups of the 7 teeth ranged from 8 to 26 months. The periapical lesions of 2 teeth were considered healed, and 5 teeth revealed healing. Clinical signs/symptoms were absent in all teeth at follow-up visits at different time points. None of the treated teeth responded to cold and electric pulp tests. This case series shows the potential of using REPs for mature teeth with necrotic pulp and apical periodontitis. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Saving Single-rooted Teeth with Combined Endodontic-periodontal Lesions.

PubMed

Pico-Blanco, Alexandre; Castelo-Baz, Pablo; Caneiro-Queija, Leticia; Liñares-González, Antonio; Martin-Lancharro, Pablo; Blanco-Carrión, Juan

2016-12-01

Teeth affected by combined endodontic-periodontal lesions are usually considered by all prognosis classifications as hopeless teeth. The development of new biomaterials combined with modern endodontic and periodontal regeneration techniques may improve dental prognosis and maintain the affected teeth. Moreover, 1 of the replacement options for those teeth, dental implants, has shown an increasing number of biological and technical complications. Five patients were included in this case series study. Full periodontal and radiographic examination revealed generalized chronic periodontitis. Moreover, endodontic-periodontal lesions affecting single-rooted teeth were detected in those patients with tissue destruction beyond the apex. After splinting those teeth, conventional endodontic and nonsurgical periodontal treatment was performed. Three months later, periodontal regeneration was applied at those teeth in order to reconstruct supporting tissues and to improve dental prognosis. After a follow-up period ranging from 14 months to 17 years, it was observed that all teeth remain asymptomatic and in normal function. No signs of apical pathosis were observed, and the periodontium was stable. All patients were included in a strict maintenance program to check the periodontal and apical status. This case series shows that it is possible to change the prognosis of teeth affected by combined endodontic-periodontal lesions, even if the periodontal support is destroyed beyond the apex. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Association between anticonvulsant drugs and teeth-grinding in children and adolescents with cerebral palsy.

PubMed

Ortega, A O L; Dos Santos, M T B R; Mendes, F M; Ciamponi, A L

2014-09-01

The relation between teeth-grinding and the use of drugs acting on the central nervous system of cerebral palsy (CP) patients has not yet been described. The aim of this research was to evaluate the presence or absence of teeth-grinding (sleep and/or awake periods) in normal and in CP children and adolescents, as well as the association of teeth-grinding and use of anticonvulsant drugs. The sample consisted of 207 children and adolescents, divided into three groups: G1, individuals with CP who did not take anticonvulsant drugs; G2, individuals with CP administered medications on a regular basis; and CG, normal individuals. Logistic regression analyses were performed to evaluate the association of teeth-grinding with some variables. No significant statistical differences were observed regarding the presence or absence of teeth-grinding when G1 and G2 were compared. However, compared with the CG, a statistically significant difference was determined, with the CG showing fewer children presenting teeth-grinding (P < 0·001). Among those children/adolescents prescribed drug therapy, the barbiturate group showed a greater frequency of teeth-grinding. CP children and adolescents show a greater and significant presence of grinding of the teeth compared with normal individuals. Subjects taking barbiturate drugs showed greater presence of teeth-grinding, than those who were taking medications from the other groups of anticonvulsant drugs. © 2014 John Wiley & Sons Ltd.

[DNA extraction from bones and teeth using AutoMate Express forensic DNA extraction system].

PubMed

Gao, Lin-Lin; Xu, Nian-Lai; Xie, Wei; Ding, Shao-Cheng; Wang, Dong-Jing; Ma, Li-Qin; Li, You-Ying

2013-04-01

To explore a new method in order to extract DNA from bones and teeth automatically. Samples of 33 bones and 15 teeth were acquired by freeze-mill method and manual method, respectively. DNA materials were extracted and quantified from the triturated samples by AutoMate Express forensic DNA extraction system. DNA extraction from bones and teeth were completed in 3 hours using the AutoMate Express forensic DNA extraction system. There was no statistical difference between the two methods in the DNA concentration of bones. Both bones and teeth got the good STR typing by freeze-mill method, and the DNA concentration of teeth was higher than those by manual method. AutoMate Express forensic DNA extraction system is a new method to extract DNA from bones and teeth, which can be applied in forensic practice.

X-linked hypophosphatemia: the mutant gene is expressed in teeth as well as in kidney.

PubMed Central

Shields, E D; Scriver, C R; Reade, T; Fujiwara, T M; Morgan, K; Ciampi, A; Schwartz, S

1990-01-01

Mutation at a locus (HPDR) on the X chromosome (McKusick 30780 [HPDR1]; 30781 [HPDR2]) causes impaired renal phosphate transport, hypophosphatemia, and an associated impairment in the process of mineralization in bone and teeth (X-linked hypophosphatemia [XLH]). We measured the dental pulp profile area (PRATIO [= pulp area/tooth area]) and serum phosphorus (Pi) values in uniformly treated XLH patients (six males, 81 teeth, 1,457 Pi values; 11 females, 129 teeth, 1,439 Pi values). Serum Pi values, reflecting the metabolic environment of tooth development, were obtained by repeated measurement between 1 mo and 26 years of age during treatment. PRATIO values calculated from standardized Rinn radiographs were used as outcome measurements of tooth development in XLH patients and in age-matched controls (12 males, 100 teeth; 27 females, 275 teeth). Age-dependent serum Pi values were not different in the treated XLH males and females. In teeth forming primary dentin there was no gene dosage effect on PRATIO values apparent in subjects below 15 years of age. However, in teeth forming secondary dentin a gene dosage was found in the subjects aged 15 to 25 years: XLH male teeth (n = 65) mean +/- SD = 0.163 +/- 0.046; XLH female teeth (n = 75) mean +/- SD = 0.137 +/- 0.039; control teeth (n = 209) mean +/- SD = 0.116 +/- 0.023; (higher PRATIO values mean less development or mineralization of secondary dentin); differences in these PRATIO values (males vs. female and XLH vs. control) were significant by mixed-model analysis of variance.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2155529

The effect of long-term disinfection procedures on hardness property of resin denture teeth.

PubMed

Campanha, Nara Hellen; Pavarina, Ana Cláudia; Jorge, Janaina Habib; Vergani, Carlos Eduardo; Machado, Ana Lucia; Giampaolo, Eunice Teresinha

2012-06-01

The aim of the study was to evaluate the effect of long-term disinfection procedures on the Vickers hardness (VHN) of acrylic resin denture teeth. Five acrylic resin denture teeth (Vipi Dent Plus-V, Trilux-T, Biolux-B, Postaris-P and Artiplus-A) and one composite resin denture teeth (SR-Orthosit-O) were embedded in heat-polymerised acrylic resin within polyvinylchloride tubes. Specimens were stored in distilled water at 37°C for 48 h. Measurements of hardness were taken after the following disinfection procedures: immersion for 7 days in 4% chlorhexidine gluconate or in 1% sodium hypochlorite (CIm and HIm group, respectively) and seven daily cycles of microwave sterilisation at 650 W for 6 min (MwS group). In the WIm group, specimens were maintained in water during the time used to perform the disinfection procedures (7 days). Data were analysed with anova followed by the Bonferroni procedure (α = 0.01). Microwave disinfection decreased the hardness of all acrylic resin denture teeth (p < 0.001). Immersion for 7 days in 4% chlorhexidine gluconate or distilled water had significant effect on the hardness of the acrylic resin denture teeth A (p < 0.01), and 1% sodium hypochlorite on teeth T (p < 0.01). All disinfection procedures decrease the hardness of the composite resin denture teeth (p < 0.01). Teeth O exhibited the highest and teeth V the lowest hardness values in the control group (p < 0.01). Disinfection procedures changed the hardness of resin denture teeth. © 2011 The Gerodontology Society and John Wiley & Sons A/S.

Open bite as a risk factor for orthodontic root resorption.

PubMed

Motokawa, Masahide; Terao, Akiko; Kaku, Masato; Kawata, Toshitsugu; Gonzales, Carmen; Darendeliler, M Ali; Tanne, Kazuo

2013-12-01

The purpose of the present study was to clarify the prevalence and degree of root resorption induced by orthodontic treatment in patients with and without open bite. One hundred and eleven patients treated with multibracket appliances were retrospectively selected from the patients and divided into non-open bite (NOB) and open bite (OB) groups. The severity of root resorption and the root shape were classified into five groups on periapical radiographs before and after treatment. Moreover, only in the OB group, all teeth were sub-divided into functional and hypofunctional ones that are occluding and non-occluding. As the results of multiple linear regression analysis of patient characteristics and clinical variables with the number of overall root resorption, the independent variables that were found to contribute significantly to root resorption were bite and abnormal root shape. The prevalences of root resorption evaluated in the number of patients were significantly higher in OB group than in NOB group, and those in the number of teeth were significantly higher in OB group than in NOB group, in particular anterior and premolar teeth. The prevalence of resorbed teeth with abnormal root shapes was also significantly higher in OB group than in NOB group. On the other hand, in OB group, the prevalences of root resorption and teeth with abnormal root shape were significantly greater in hypofunctional teeth than in normal functional teeth. There are more teeth with root resorption and abnormal root shape in open bite cases than in normal bite cases, and more teeth with abnormal root shapes and root resorption in hypofunctional teeth than in functional teeth.

The teeth of the horse: evolution and anatomo-morphological and radiographic study of their development in the foetus.

PubMed

Soana, S; Gnudi, G; Bertoni, G

1999-12-01

The aim of this work was to study the ontogenetic process in teeth from their early appearance in the ossifying matrix of the mandible and maxilla, in different foetuses of scalar ages. Radiographic examinations of the skull and mandible hemisections were performed and the latero-medial (LM) and dorsoventral (DV) projections for the skull and mandible were analysed. A high-definition film-screen combination was used for this study. The exposure values ranged from 35 kV/6 mAs to 58 kV/10 mAs, according to the size of the skulls and their degree of ossification. The first dental germ observed was the P3, at 138-140 days of pregnancy. At 146 days, P2 and P4 dental germs were visible. At 160-168 days, the dental germ of the first deciduous incisor tooth (I1) appeared; at 180-188 days of pregnancy the germ of the second (I2), and at 224 days the germ of the third (I3), were detectable. At 275 days the dental germ of the mandibular first molar tooth (M1) appeared, while the maxillary M1, which was not visible radiographically, was represented by a jelly-like amorphous body within its alveolar cavity.

Always chew your food: freshwater stingrays use mastication to process tough insect prey.

PubMed

Kolmann, Matthew A; Welch, Kenneth C; Summers, Adam P; Lovejoy, Nathan R

2016-09-14

Chewing, characterized by shearing jaw motions and high-crowned molar teeth, is considered an evolutionary innovation that spurred dietary diversification and evolutionary radiation of mammals. Complex prey-processing behaviours have been thought to be lacking in fishes and other vertebrates, despite the fact that many of these animals feed on tough prey, like insects or even grasses. We investigated prey capture and processing in the insect-feeding freshwater stingray Potamotrygon motoro using high-speed videography. We find that Potamotrygon motoro uses asymmetrical motion of the jaws, effectively chewing, to dismantle insect prey. However, CT scanning suggests that this species has simple teeth. These findings suggest that in contrast to mammalian chewing, asymmetrical jaw action is sufficient for mastication in other vertebrates. We also determined that prey capture in these rays occurs through rapid uplift of the pectoral fins, sucking prey beneath the ray's body, thereby dissociating the jaws from a prey capture role. We suggest that the decoupling of prey capture and processing facilitated the evolution of a highly kinetic feeding apparatus in batoid fishes, giving these animals an ability to consume a wide variety of prey, including molluscs, fishes, aquatic insect larvae and crustaceans. We propose Potamotrygon as a model system for understanding evolutionary convergence of prey processing and chewing in vertebrates. © 2016 The Author(s).

Always chew your food: freshwater stingrays use mastication to process tough insect prey

PubMed Central

Welch, Kenneth C.; Summers, Adam P.; Lovejoy, Nathan R.

2016-01-01

Chewing, characterized by shearing jaw motions and high-crowned molar teeth, is considered an evolutionary innovation that spurred dietary diversification and evolutionary radiation of mammals. Complex prey-processing behaviours have been thought to be lacking in fishes and other vertebrates, despite the fact that many of these animals feed on tough prey, like insects or even grasses. We investigated prey capture and processing in the insect-feeding freshwater stingray Potamotrygon motoro using high-speed videography. We find that Potamotrygon motoro uses asymmetrical motion of the jaws, effectively chewing, to dismantle insect prey. However, CT scanning suggests that this species has simple teeth. These findings suggest that in contrast to mammalian chewing, asymmetrical jaw action is sufficient for mastication in other vertebrates. We also determined that prey capture in these rays occurs through rapid uplift of the pectoral fins, sucking prey beneath the ray's body, thereby dissociating the jaws from a prey capture role. We suggest that the decoupling of prey capture and processing facilitated the evolution of a highly kinetic feeding apparatus in batoid fishes, giving these animals an ability to consume a wide variety of prey, including molluscs, fishes, aquatic insect larvae and crustaceans. We propose Potamotrygon as a model system for understanding evolutionary convergence of prey processing and chewing in vertebrates. PMID:27629029

21 CFR 872.5550 - Teething ring.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Teething ring. 872.5550 Section 872.5550 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Therapeutic Devices § 872.5550 Teething ring. (a) Identification. A teething ring is a...

Morphology evolution of hierarchical ZnO nanostructures modulated by supersaturation and growth temperature

NASA Astrophysics Data System (ADS)

Yan, Youguo; Zhou, Lixia; Yu, Lianqing; Zhang, Ye

2008-07-01

Three kinds of ZnO hierarchical structures, nanocombs with tube- and needle-shaped teeth and hierarchical nanorod arrays, were successfully synthesized through the chemical vapor deposition method. Combining the experimental parameters, the microcosmic growing conditions (growth temperature and supersaturation) along the flux was discussed at length, and, based on the conclusions, three reasonable growth processes were proposed. The results and discussions were beneficial to further realize the relation between the growing behavior of the nanomaterial and microcosmic conditions, and the hierarchical nanostructures obtained were also expected to have potential applications as functional blocks in future nanodevices. Furthermore, the study of photoluminescence further indicated that the physical properties were strongly dependent on the crystal structure.

Evolution of central pattern generators and rhythmic behaviours

PubMed Central

Katz, Paul S.

2016-01-01

Comparisons of rhythmic movements and the central pattern generators (CPGs) that control them uncover principles about the evolution of behaviour and neural circuits. Over the course of evolutionary history, gradual evolution of behaviours and their neural circuitry within any lineage of animals has been a predominant occurrence. Small changes in gene regulation can lead to divergence of circuit organization and corresponding changes in behaviour. However, some behavioural divergence has resulted from large-scale rewiring of the neural network. Divergence of CPG circuits has also occurred without a corresponding change in behaviour. When analogous rhythmic behaviours have evolved independently, it has generally been with different neural mechanisms. Repeated evolution of particular rhythmic behaviours has occurred within some lineages due to parallel evolution or latent CPGs. Particular motor pattern generating mechanisms have also evolved independently in separate lineages. The evolution of CPGs and rhythmic behaviours shows that although most behaviours and neural circuits are highly conserved, the nature of the behaviour does not dictate the neural mechanism and that the presence of homologous neural components does not determine the behaviour. This suggests that although behaviour is generated by neural circuits, natural selection can act separately on these two levels of biological organization. PMID:26598733

Evolution of central pattern generators and rhythmic behaviours.

PubMed

Katz, Paul S

2016-01-05

Comparisons of rhythmic movements and the central pattern generators (CPGs) that control them uncover principles about the evolution of behaviour and neural circuits. Over the course of evolutionary history, gradual evolution of behaviours and their neural circuitry within any lineage of animals has been a predominant occurrence. Small changes in gene regulation can lead to divergence of circuit organization and corresponding changes in behaviour. However, some behavioural divergence has resulted from large-scale rewiring of the neural network. Divergence of CPG circuits has also occurred without a corresponding change in behaviour. When analogous rhythmic behaviours have evolved independently, it has generally been with different neural mechanisms. Repeated evolution of particular rhythmic behaviours has occurred within some lineages due to parallel evolution or latent CPGs. Particular motor pattern generating mechanisms have also evolved independently in separate lineages. The evolution of CPGs and rhythmic behaviours shows that although most behaviours and neural circuits are highly conserved, the nature of the behaviour does not dictate the neural mechanism and that the presence of homologous neural components does not determine the behaviour. This suggests that although behaviour is generated by neural circuits, natural selection can act separately on these two levels of biological organization. © 2015 The Author(s).

Developmental constraints and convergent evolution in Drosophila sex comb formation.

PubMed

Atallah, Joel; Liu, Nana Hou; Dennis, Peter; Hon, Andy; Larsen, Ellen W

2009-01-01

The most complex and diverse secondary sexual character in Drosophila is the sex comb (SC), an arrangement of modified bristles on the forelegs of a subclade of male fruit flies. We examined SC formation in six representative nonmodel fruit fly species, in an effort to understand how the variation in comb patterning arises. We first compared SC development in two species with relatively small combs, Drosophila takahashii, where the SCs remain approximately transverse, and Drosophila biarmipes, where two rows of SC teeth rotate and move in an anterior direction relative to other bristle landmarks. We then analyzed comb ontogeny in species with prominent extended SCs parallel to the proximodistal axis, including Drosophila ficusphila and species of the montium subgroup. Our study allowed us to identify two general methods of generating longitudinal combs on the tarsus, and we showed that a montium subgroup species (Drosophila nikananu) with a comb convergently similar in size, orientation and position to the model organism Drosophila melanogaster, forms its SC through a different developmental mechanism. We also found that the protein product of the leg patterning gene, dachshund (dac), is strongly reduced in the SC in all species, but not in other bristles. Our results suggest that an apparent constraint on SC position in the adult may be attributable to at least two different lineage-specific developmental processes, although external forces could also play a role.

Validation of neoclassical bootstrap current models in the edge of an H-mode plasma.

PubMed

Wade, M R; Murakami, M; Politzer, P A

2004-06-11

Analysis of the parallel electric field E(parallel) evolution following an L-H transition in the DIII-D tokamak indicates the generation of a large negative pulse near the edge which propagates inward, indicative of the generation of a noninductive edge current. Modeling indicates that the observed E(parallel) evolution is consistent with a narrow current density peak generated in the plasma edge. Very good quantitative agreement is found between the measured E(parallel) evolution and that expected from neoclassical theory predictions of the bootstrap current.

Supernumerary Teeth in Primary Dentition and Early Intervention: A Series of Case Reports

PubMed Central

Bahadure, Rakesh N.; Thosar, Nilima; Jain, Eesha S.; Kharabe, Vidhi; Gaikwad, Rahul

2012-01-01

Supernumerary teeth are considered as one of the most significant dental anomalies during the primary and early mixed dentition stages. They are of great concern to the dentists and parents because of the eruption, occlusal, and esthetic problems they can cause. Supernumerary teeth occur more frequently in the permanent dentition but rarely in primary dentition. Mesiodens is the most common type of supernumerary teeth but rarely seen in lower arch. Early recognition and diagnosis of supernumerary teeth is important to prevent further complications in permanent dentition. Four cases of supernumerary teeth with mesiodens in upper and lower arch in primary dentition and their management have been discussed. PMID:22888456

Adult Human Gingival Epithelial Cells as a Source for Whole-tooth Bioengineering

PubMed Central

Angelova Volponi, A.; Kawasaki, M.; Sharpe, P.T.

2013-01-01

Teeth develop from interactions between embryonic oral epithelium and neural-crest-derived mesenchyme. These cells can be separated into single-cell populations and recombined to form normal teeth, providing a basis for bioengineering new teeth if suitable, non-embryonic cell sources can be identified. We show here that cells can be isolated from adult human gingival tissue that can be expanded in vitro and, when combined with mouse embryonic tooth mesenchyme cells, form teeth. Teeth with developing roots can be produced from this cell combination following transplantation into renal capsules. These bioengineered teeth contain dentin and enamel with ameloblast-like cells and rests of Malassez of human origin. PMID:23458883

Three-dimensional finite element analysis of implant-assisted removable partial dentures.

PubMed

Eom, Ju-Won; Lim, Young-Jun; Kim, Myung-Joo; Kwon, Ho-Beom

2017-06-01

Whether the implant abutment in implant-assisted removable partial dentures (IARPDs) functions as a natural removable partial denture (RPD) tooth abutment is unknown. The purpose of this 3-dimensional finite element study was to analyze the biomechanical behavior of implant crown, bone, RPD, and IARPD. Finite element models of the partial maxilla, teeth, and prostheses were generated on the basis of a patient's computed tomographic data. The teeth, surveyed crowns, and RPDs were created in the model. With the generated components, four 3-dimensional finite element models of the partial maxilla were constructed: tooth-supported RPD (TB), implant-supported RPD (IB), tooth-tissue-supported RPD (TT), and implant-tissue-supported RPD (IT) models. Oblique loading of 300 N was applied on the crowns and denture teeth. The von Mises stress and displacement of the denture abutment tooth and implant system were identified. The highest von Mises stress values of both IARPDs occurred on the implants, while those of both natural tooth RPDs occurred on the frameworks of the RPDs. The highest von Mises stress of model IT was about twice that of model IB, while the value of model TT was similar to that of model TB. The maximum displacement was greater in models TB and TT than in models IB and IT. Among the 4 models, the highest maximum displacement value was observed in the model TT and the lowest value was in the model IB. Finite element analysis revealed that the stress distribution pattern of the IARPDs was different from that of the natural tooth RPDs and the stress distribution of implant-supported RPD was different from that of implant-tissue-supported RPD. When implants are used for RPD abutments, more consideration concerning the RPD design and the number or location of the implant is necessary. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Clinical and radiographic evaluation of one- and two-visit endodontic treatment of asymptomatic necrotic teeth with apical periodontitis: a randomized clinical trial.

PubMed

Molander, Anders; Warfvinge, Johan; Reit, Claes; Kvist, Thomas

2007-10-01

The present investigation recorded the 2-year clinical and radiographic outcome of one- and two visit endodontic treatment and studied the significance of the bacteriologic sampling results on the outcome. A randomization procedure allocated 53 teeth to one-visit treatment and 48 teeth to two-visit treatment. At the end of the study period, 32 teeth (65%) in the one-visit group and 30 teeth (75%) in the two-visit group were classified as healed. The statistical analysis of the healing results did not show any significant difference between the groups (p = 0.75). Forty-nine (80%) of the 61 teeth that were obturated after a negative micobiologic sample were classified as healed. Teeth sealed after positive samples healed in 44%. The present study gave evidence that similar healing results might be obtained through one- and two-visit antimicrobial treatment.

Combined Orthodontic-surgical Treatment for Skeletal Class III Malocclusion with Multiple Impacted Permanent and Supernumerary Teeth: Case Report.

PubMed

Xue, Dai Juan And Feng

2014-01-01

In this report we describe a combined orthodontic and surgical treatment for a 14-year-old boy with severe skeletal class III deformity and dental problem. His upper posterior primary teeth in the left side were over-retained and 6 maxillary teeth (bilateral central incisors and canines, left first and second premolars) were impacted, together with 5 supernumerary teeth in both arches. The treatment protocol involved extraction of all the supernumerary and deciduous teeth, surgical exposure and orthodontic traction of the impacted teeth, a bimaxillary orthognathic approach including Lefort I osteotomy. Bilateral sagittal split ramus osteotomy (BSSRO) and genioplasty was performed to correct skeletal problem. After treatment, all of the impacted teeth were brought to proper alignment in the maxillary arch. A satisfied profile and good posterior occlusion was achieved. Treatment mechanics and consideration during different stages are discussed.

Autotransplantation donor tooth site harvesting using piezosurgery.

PubMed

Ylikontiola, Leena P; Sándor, George K

2016-01-01

The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

21 CFR 872.6475 - Heat source for bleaching teeth.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Heat source for bleaching teeth. 872.6475 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6475 Heat source for bleaching teeth. (a) Identification. A heat source for bleaching teeth is an AC-powered device that consists of a...

21 CFR 872.6475 - Heat source for bleaching teeth.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Heat source for bleaching teeth. 872.6475 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6475 Heat source for bleaching teeth. (a) Identification. A heat source for bleaching teeth is an AC-powered device that consists of a...

21 CFR 872.6475 - Heat source for bleaching teeth.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Heat source for bleaching teeth. 872.6475 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6475 Heat source for bleaching teeth. (a) Identification. A heat source for bleaching teeth is an AC-powered device that consists of a...

21 CFR 872.6475 - Heat source for bleaching teeth.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Heat source for bleaching teeth. 872.6475 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6475 Heat source for bleaching teeth. (a) Identification. A heat source for bleaching teeth is an AC-powered device that consists of a...

21 CFR 872.6475 - Heat source for bleaching teeth.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Heat source for bleaching teeth. 872.6475 Section... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6475 Heat source for bleaching teeth. (a) Identification. A heat source for bleaching teeth is an AC-powered device that consists of a...

90Sr in teeth of cattle abandoned in evacuation zone: Record of pollution from the Fukushima-Daiichi Nuclear Power Plant accident

NASA Astrophysics Data System (ADS)

Koarai, Kazuma; Kino, Yasushi; Takahashi, Atsushi; Suzuki, Toshihiko; Shimizu, Yoshinaka; Chiba, Mirei; Osaka, Ken; Sasaki, Keiichi; Fukuda, Tomokazu; Isogai, Emiko; Yamashiro, Hideaki; Oka, Toshitaka; Sekine, Tsutomu; Fukumoto, Manabu; Shinoda, Hisashi

2016-04-01

Here we determined the 90Sr concentrations in the teeth of cattle abandoned in the evacuation area of the Fukushima-Daiichi Nuclear Power Plant (FNPP) accident. 90Sr activity concentrations in the teeth varied from 6-831 mBq (g Ca)-1 and exhibited a positive relationship with the degree of radioactive contamination that the cattle experienced. Even within an individual animal, the specific activity of 90Sr (Bq (g Sr)-1) varied depending on the development stage of the teeth during the FNPP accident: teeth that were early in development exhibited high 90Sr specific activities, while teeth that were late in development exhibited low specific activities. These findings demonstrate that 90Sr is incorporated into the teeth during tooth development; thus, tooth 90Sr activity concentrations reflect environmental 90Sr levels during tooth formation. Assessment of 90Sr in teeth could provide useful information about internal exposure to 90Sr radiation and allow for the measurement of time-course changes in the degree of environmental 90Sr pollution.

Study on stability of rake teeth inserting soil of chain rake type mulching film recovery machine based on Adams

NASA Astrophysics Data System (ADS)

Guo, Wensong; Jian, Jianming; San, Yunlong; Lui, Rui; Li, Gang; Hou, Shulin

2017-08-01

Traditional rake type mulching film recycling machine has the problem of difficulty in unloading and packing film, poor continuity of the work. In order to solve such problems, this paper designs a kind of chain rake type mulching film recycling machine which can realize continuous raking film, collecting film, transporting film, shaking off soil, unloading film. Rake teeth is the basic part of chain rake mulching recycling machine. The stability of rake teeth's inserting soil is an important factor to ensure recovery efficiency of the plastic film recovery. By virtual prototype simulation, this paper study the influence of different factors on the stability of rake teeth inserting soil. The results are as follows: The speed of chain rake has no significant effect on the stability of rake teeth inserting soil; Reducing resistance of rake teeth in the process of working, is conducive to improve the stability of rake teeth inserting soil; Appropriate increasing elastic modulus of chain rake, is helpful to enhance the stability of rake teeth inserting soil.

(90)Sr in teeth of cattle abandoned in evacuation zone: Record of pollution from the Fukushima-Daiichi Nuclear Power Plant accident.

PubMed

Koarai, Kazuma; Kino, Yasushi; Takahashi, Atsushi; Suzuki, Toshihiko; Shimizu, Yoshinaka; Chiba, Mirei; Osaka, Ken; Sasaki, Keiichi; Fukuda, Tomokazu; Isogai, Emiko; Yamashiro, Hideaki; Oka, Toshitaka; Sekine, Tsutomu; Fukumoto, Manabu; Shinoda, Hisashi

2016-04-05

Here we determined the (90)Sr concentrations in the teeth of cattle abandoned in the evacuation area of the Fukushima-Daiichi Nuclear Power Plant (FNPP) accident. (90)Sr activity concentrations in the teeth varied from 6-831 mBq (g Ca)(-1) and exhibited a positive relationship with the degree of radioactive contamination that the cattle experienced. Even within an individual animal, the specific activity of (90)Sr (Bq (g Sr)(-1)) varied depending on the development stage of the teeth during the FNPP accident: teeth that were early in development exhibited high (90)Sr specific activities, while teeth that were late in development exhibited low specific activities. These findings demonstrate that (90)Sr is incorporated into the teeth during tooth development; thus, tooth (90)Sr activity concentrations reflect environmental (90)Sr levels during tooth formation. Assessment of (90)Sr in teeth could provide useful information about internal exposure to (90)Sr radiation and allow for the measurement of time-course changes in the degree of environmental (90)Sr pollution.

90Sr in teeth of cattle abandoned in evacuation zone: Record of pollution from the Fukushima-Daiichi Nuclear Power Plant accident

PubMed Central

Koarai, Kazuma; Kino, Yasushi; Takahashi, Atsushi; Suzuki, Toshihiko; Shimizu, Yoshinaka; Chiba, Mirei; Osaka, Ken; Sasaki, Keiichi; Fukuda, Tomokazu; Isogai, Emiko; Yamashiro, Hideaki; Oka, Toshitaka; Sekine, Tsutomu; Fukumoto, Manabu; Shinoda, Hisashi

2016-01-01

Here we determined the 90Sr concentrations in the teeth of cattle abandoned in the evacuation area of the Fukushima-Daiichi Nuclear Power Plant (FNPP) accident. 90Sr activity concentrations in the teeth varied from 6–831 mBq (g Ca)−1 and exhibited a positive relationship with the degree of radioactive contamination that the cattle experienced. Even within an individual animal, the specific activity of 90Sr (Bq (g Sr)−1) varied depending on the development stage of the teeth during the FNPP accident: teeth that were early in development exhibited high 90Sr specific activities, while teeth that were late in development exhibited low specific activities. These findings demonstrate that 90Sr is incorporated into the teeth during tooth development; thus, tooth 90Sr activity concentrations reflect environmental 90Sr levels during tooth formation. Assessment of 90Sr in teeth could provide useful information about internal exposure to 90Sr radiation and allow for the measurement of time-course changes in the degree of environmental 90Sr pollution. PMID:27045764

Periodontal response to all-ceramic crowns (IPS Empress) in general practice.

PubMed

Al-Wahadni, A M; Mansour, Y; Khader, Y

2006-02-01

The purpose of this study was to investigate the periodontal response to the presence of all-ceramic crowns (IPS Empress) in general practice patients. The convenience sample included 82 IPS Empress crowns placed in 64 patients. These crowns had been in place for an average of 16.27 (SD 9.26) months and ranged from 6.2 to 48.87 months at the time of clinical examination. Periodontal health status (as determined by dental plaque, gingival health status, periodontal pockets) was assessed around all crowned teeth and around matched contralateral teeth by one calibrated examiner. Periodontal indices utilized included the Plaque Index (PI), Gingival Index (GI) and pocket depth (PD) with calibrated probes graduated in millimetres. Plaque, gingival and PD values for crowned teeth were compared with those for control teeth using Wilcoxon signed-rank test for each clinical parameters. Chi-square was used to test the significance of the difference in their distribution between crowns and control teeth. Statistically, PI (0.35), GI (0.41) and mean PD scores (1.42) of IPS Empress crowned teeth compared less favourably with scores of the control teeth (0.27, 0.23 and 0.86 respectively). Teeth with IPS Empress crowns had poorer periodontal health and more clinically evident plaque than uncrowned teeth.

The prevalence of dental anomalies in the Western region of saudi arabia.

PubMed

Afify, Ahmed R; Zawawi, Khalid H

2012-01-01

Objective. The aim of this cross-sectional study was to investigate the prevalence of dental anomalies that could be a cause of malocclusion in the western region of Saudi Arabia. Materials and Methods. A retrospective study of 878 digital orthopantomograms (OPGs) taken of patients, age ranging between 12 and 30 years, who presented to treatment at the Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia between 2002 and 2011. The OPGs and dental records were reviewed for congenitally missing teeth, supernumerary teeth, impactions, ectopic eruption, transposition, germination, fusion, dilacerations, taurodontism, dens in dent, and any other unusual conditions that can be assessed with OPG. Results. The prevalence of patient that exhibited at least one dental anomaly was 396 (45.1%) patients. The prevalence of congenitally missing teeth was 226 (25.7%), impacted teeth 186 (21.1%), dilacerated teeth 10 (1.1%), supernumerary teeth 3 (0.3%), odontoma 1 (0.1%), and taurodontism was also 1 case (0.1%) of the total radiographs reviewed. Conclusions. Congenitally missing teeth were found to be the most prevalent anomaly (25.7%), and the second frequent anomaly was impacted teeth (21.1%), whereas root dilacerations, supernumerary teeth, and taurodontism were the least frequent anomalies (1.1%, 0.3% and 0.1%, resp.).

Developmental palaeontology in synapsids: the fossil record of ontogeny in mammals and their closest relatives

PubMed Central

Sánchez-Villagra, Marcelo R.

2010-01-01

The study of fossilized ontogenies in mammals is mostly restricted to postnatal and late stages of growth, but nevertheless can deliver great insights into life history and evolutionary mechanisms affecting all aspects of development. Fossils provide evidence of developmental plasticity determined by ecological factors, as when allometric relations are modified in species which invaded a new space with a very different selection regime. This is the case of dwarfing and gigantism evolution in islands. Skeletochronological studies are restricted to the examination of growth marks mostly in the cement and dentine of teeth and can provide absolute age estimates. These, together with dental replacement data considered in a phylogenetic context, provide life-history information such as maturation time and longevity. Palaeohistology and dental replacement data document the more or less gradual but also convergent evolution of mammalian growth features during early synapsid evolution. Adult phenotypes of extinct mammals can inform developmental processes by showing a combination of features or levels of integration unrecorded in living species. Some adult features such as vertebral number, easily recorded in fossils, provide indirect information about somitogenesis and hox-gene expression boundaries. Developmental palaeontology is relevant for the discourse of ecological developmental biology, an area of research where features of growth and variation are fundamental and accessible among fossil mammals. PMID:20071389

Infant teething information on the world wide web: taking a byte out of the search.

PubMed

Kozuch, Mary; Peacock, Erica; D'Auria, Jennifer P

2015-01-01

The purpose of this study was to describe and evaluate the quality of infant teething information on selected popular parenting Web sites. Two checklists were used to evaluate the quality of the 16 parenting sites and infant teething-specific content included on each site. Three of the 16 parenting sites did not contain teething-specific articles. Teething-specific content found on 13 of the 16 sites supported a connection between the process of teething and nonspecific symptoms with a perception that management is required. Popular management strategies included chewing on chilled objects, gingival massage, and the use of over-the-counter medications. Information about possible adverse effects of administering medications for infant teething was not found on the majority of sites. Eleven of the 16 sites advised parents to contact their primary care provider if they were uncertain about management for infant teething or whether the symptoms were related to illness. Although infant teething has an evidence base from which parents and professionals can make safe decisions about symptoms and treatment, translating the evidence into professional practice and health-related information on the Internet remains a challenge. Parents and pediatric health providers would benefit greatly from the development of clinical practice guidelines summarizing our present-day understanding of teething symptoms and the limited evidence supporting the use of over-the-counter medications. Copyright © 2015 National Association of Pediatric Nurse Practitioners. Published by Elsevier Inc. All rights reserved.

Prenatal metal exposure in the Middle East: imprint of war in deciduous teeth of children.

PubMed

Savabieasfahani, M; Ali, S Sadik; Bacho, R; Savabi, O; Alsabbak, M

2016-09-01

In war zones, the explosion of bombs, bullets, and other ammunition releases multiple neurotoxicants into the environment. The Middle East is currently the site of heavy environmental disruption by massive bombardments. A very large number of US military bases, which release highly toxic environmental contaminants, have also been erected since 2003. Current knowledge supports the hypothesis that war-created pollution is a major cause of rising birth defects and cancers in Iraq. We created elemental bio-imaging of trace elements in deciduous teeth of children with birth defects from Iraq. Healthy and naturally shed teeth from Lebanon and Iran were also analyzed for trace elements. Lead (Pb) was highest in teeth from children with birth defects who donated their teeth from Basra, Iraq (mean 0.73-16.74 (208)Pb/(43)Ca ppm, n = 3). Pb in healthy Lebanese and Iranian teeth were 0.038-0.382 (208)Pb/(43)Ca ppm (n = 4) and 0.041-0.31 (208)Pb/(43)Ca ppm (n = 2), respectively. Our hypothesis that increased war activity coincides with increased metal levels in deciduous teeth is confirmed by this research. Lead levels were similar in Lebanese and Iranian deciduous teeth. Deciduous teeth from Iraqi children with birth defects had remarkably higher levels of Pb. Two Iraqi teeth had four times more Pb, and one tooth had as much as 50 times more Pb than samples from Lebanon and Iran.

Further Treatments of Root-filled Teeth in the Swedish Adult Population: A Comparison of Teeth Restored with Direct and Indirect Coronal Restorations.

PubMed

Dawson, Victoria S; Isberg, Per-Erik; Kvist, Thomas; Fransson, Helena

2017-09-01

The aim of this study was to evaluate the frequencies of nonsurgical retreatment, root-end surgery, extraction, and further restoration of root-filled teeth in Sweden in 2009 during a follow-up period of 5 years and to compare the outcomes in teeth restored with direct or indirect restorations. Data from the Swedish Social Insurance Agency were analyzed, and the frequencies of nonsurgical retreatment, root-end surgery, extractions, and further restoration were calculated for all teeth registered as root filled during 2009. Chi-square tests were applied to detect any significant differences in the frequency of further treatment in teeth registered as restored with either a direct or an indirect restoration within 6 months of root filling. Of the 248,299 teeth reported root filled in Sweden in 2009, nonsurgical retreatment was registered in 2.2%, root-end surgery in 1.0%, and extractions in 9.2% during the follow-up period. Of the teeth restored with a direct restoration within 6 months after the root filling, 30.3% were registered as having undergone at least 1 further direct restoration; the corresponding percentage of teeth with indirect restorations was 6.4%. A statistically significant difference in the frequency of nonsurgical retreatment, extraction, and further restoration was found; teeth restored with an indirect restoration within 6 months of root filling had fewer of these treatments than those restored by direct restoration. Low frequencies of nonsurgical retreatment and root-end surgery were reported 5 years after root filling, whereas extraction was more common. Fewer additional treatment procedures were registered for teeth with indirect restorations than for those with direct restorations. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Considerations for Altering Preparation Designs of Porcelain Inlay/Onlay Restorations for Nonvital Teeth.

PubMed

Homsy, Foudda; Eid, Rita; El Ghoul, Wiam; Chidiac, Jose Johann

2015-08-01

The aim of this study was to compare all ceramic inlay/onlay survival rates in vital and nonvital teeth having the same cavity design. Filling the pulp chamber with ceramic materials or not was also discussed. Ceramic class II inlays/onlays were made on 11 premolars and 30 molars: 14 vital, 27 endodontically treated. The same tooth preparation design was performed on vital and nonvital teeth: In nonvital teeth the pulp chambers were covered by a glass ionomer cement until the pulpal floor depths were between 2 and 2.5 mm, more likely similar to the vital teeth preparations. In vital teeth, glass ionomer was used as a liner to achieve pulpal floor depths between 2 and 2.5 mm when needed. The restorations were assessed (at baseline, 6 months, 1 and 2 years) according to three criteria: marginal discoloration, marginal integrity, and fracture of teeth/restorations, consistent with United States Public Health Service (USPHS) criteria. Eight teeth (19%) showed minor marginal discolorations, while three molars (7%) had loss of marginal integrity. These margins were adjusted using rubber polishing cups and were then judged clinically acceptable. From these three molars, one was vital and two were endodontically treated. No fracture of teeth or restorations was observed. Chi square and exact probability tests were used. There was no statistical difference between vital and nonvital teeth (p = 0.719 chi-squared and Fisher) or between premolars and molars (p = 0.564 chi-squared; 1.000, Fisher). Within the limitations of this study there was no difference for the same inlay/onlay cavity design between vital and nonvital teeth. In nonvital teeth, it seems that filling the pulp chamber with a ceramic core material is not important. Long-term observation periods are needed to reinforce the clinical behavior outcome. © 2015 by the American College of Prosthodontists.

IN VITRO WEAR RESISTANCE OF THREE TYPES OF POLYMETHYL METHACRYLATE DENTURE TEETH

PubMed Central

Reis, Katia Rodrigues; Bonfante, Gerson; Pegoraro, Luiz Fernando; Conti, Paulo Cesar Rodrigues; de Oliveira, Pedro Cesar Garcia; Kaizer, Osvaldo Bazzan

2008-01-01

The wear resistance of denture teeth is important to the longevity of removable prostheses of edentulous patients. The ability of denture teeth to maintain a stable occlusal relationship over time may be influenced by this property. The purpose of this in vitro study was to evaluate the wear resistance of polymethyl methacrylate (PMMA) denture teeth based on their chemical composition when opposed by a ceramic antagonist. The maxillary canines (n=10) of 3 PMMA denture teeth (Trubyte Biotone, cross-linked PMMA; Trilux, highly cross-linked IPN (interpenetrating polymer network)-PMMA; and Vivodent, highly cross-linked PMMA) were secured in an in vitro 2-body wear-testing apparatus that produced sliding contact of the specimens (4.5 cycles/s, sliding distance of 20 mm, under 37°C running water) against glazed or airborne particle abraded ceramic. Wear resistance was measured as height loss (mm) under 300 g (sliding force) after 100,000 cycles, using a digital measuring microscope. Mean values were analyzed by 2-way ANOVA and Tukey's test (α=0.05). The wear of Trubyte Biotone (0.93 ± 0.14 mm) was significantly higher than that of both other types of teeth tested against abraded ceramic (p<0.05). The Vivodent tooth (0.64 ± 0.17 mm) exhibited the best wear resistance among the denture teeth tested against airborne particle abraded ceramic. There were no statistically significant differences (p>0.05) in wear among the 3 denture teeth evaluated against glazed ceramic. Trilux and Vivodent teeth tested against either glazed or airborne particle abraded ceramic did not differ significantly from each other (p<0.05). All teeth showed significantly more wear against airborne particle abraded ceramic than against glazed ceramic (p<0.05). In conclusion, the three types of PMMA denture teeth presented significantly different wear resistance against the abraded ceramic. The high-strength PMMA denture teeth were more wear-resistant than the conventional PMMA denture tooth. PMID:19089214

Experimental evolution and the dynamics of adaptation and genome evolution in microbial populations.

PubMed

Lenski, Richard E

2017-10-01

Evolution is an on-going process, and it can be studied experimentally in organisms with rapid generations. My team has maintained 12 populations of Escherichia coli in a simple laboratory environment for >25 years and 60 000 generations. We have quantified the dynamics of adaptation by natural selection, seen some of the populations diverge into stably coexisting ecotypes, described changes in the bacteria's mutation rate, observed the new ability to exploit a previously untapped carbon source, characterized the dynamics of genome evolution and used parallel evolution to identify the genetic targets of selection. I discuss what the future might hold for this particular experiment, briefly highlight some other microbial evolution experiments and suggest how the fields of experimental evolution and microbial ecology might intersect going forward.

Heat generated by Er:YAG laser in the pulp chamber of teeth submitted to removal of dental tissue and composite resin

NASA Astrophysics Data System (ADS)

Zanin, Fatima; Brugnera, Aldo, Jr.; Pecora, Jesus D.; Pinheiro, Antonio; Spano, Julio; Barbin, Eduardo; Marchesan, Melissa A.

2004-05-01

The knowledge about and control of thermal energy produced by Er:YAG laser after irradiating hard dental tissues and compound resin is important because the pulp, like all vital biological tissue, has a certain capacity for supporting stimulus. The objective of this study was to analyze the thermal variation generated by Er:YAG laser (λ=2.94μm) during the preparation of a Class I cavity in the dental structure and in the removal of microhybrid Z100 (3M) compound resin. An evaluation was made of 30 maxillary human pre-molar teeth from the bank of the Endodontic Laboratory Center of Ribeirao Preto Dental School, Brasil. The sample was divided into 6 groups of 5 teeth each: Group 1, preparation of Class I cavity with Er:YAG laser (350mJ, 3Hz, 343 impulses, 120J, 113 seconds); Group 2, preparation of Class I cavity with Er:YAG laser (350mJ, 4Hz, 343 impulses, 120J, 81 seconds); Group 3, preparation of Class I cavity with Er:YAG laser (350mJ, 6Hz, 343 impulses, 120J, 58 seconds); Group 4, removal of compound resin from Class I preparation with Er:YAG laser (350mJ, 3Hz, 258 impulses, 90J, 85 seconds); Group 5, removal of compound resin from Class I preparation with Er:YAG laser (350mJ, 4Hz, 258 impulses, 90J, 67 seconds); Group 6, removal of compound resin from Class I preparation with Er:YAG laser (350mJ, 6Hz, 258 impulses, 42 seconds). The laser used was KaVo Key 2 (Biberach, Germany), λ=2,94μm, P=3 Watts, pulse duration of 250μs, with air-water cooling. The increase in temperature during dental preparation and the removal of the compound resin was evaluated by means of a Tektronix DMM916 Thermocouple (Consitec, Brasil). The results showed that the application of laser for the removal of the hard dental tissues and for the removal of compound resins with the pulse frequencies 3, 4 and 6 Hz did not generate heating greater than 3.1°C and remained within the histopathological limits permitted for pulp tissue (5.5°C) and there was a significant statistical difference between the heat generated by the application of laser in the removal of the hard dental tissues and in the removal of compound resins (p<0.01). The average increase in temperature of the compound resin component was greater than the tooth.

Generation of tooth-periodontium complex structures using high-odontogenic potential dental epithelium derived from mouse embryonic stem cells.

PubMed

Zhang, Yancong; Li, Yongliang; Shi, Ruirui; Zhang, Siqi; Liu, Hao; Zheng, Yunfei; Li, Yan; Cai, Jinglei; Pei, Duanqing; Wei, Shicheng

2017-06-08

A number of studies have shown that tooth-like structures can be regenerated using induced pluripotent stem cells and mouse embryonic stem (mES) cells. However, few studies have reported the regeneration of tooth-periodontium complex structures, which are more suitable for clinical tooth transplantation. We established an optimized approach to induce high-odontogenic potential dental epithelium derived from mES cells by temporally controlling bone morphogenic protein 4 (BMP4) function and regenerated tooth-periodontium complex structures in vivo. First, immunofluorescence and quantitative reverse transcription-polymerase chain reaction were used to identify the watershed of skin and the oral ectoderm. LDN193189 was then used to inhibit the BMP4 receptor around the watershed, followed by the addition of exogenous BMP4 to promote BMP4 function. The generated dental epithelium was confirmed by western blot analysis and immunofluorescence. The generated epithelium was ultimately combined with embryonic day 14.5 mouse mesenchyme and transplanted into the renal capsules of nude mice. After 4 weeks, the tooth-periodontium complex structure was examined by micro-computed tomography (CT) and hematoxylin and eosin (H&E) staining. Our study found that the turning point of oral ectoderm differentiation occurred around day 3 after the embryoid body was transferred to a common culture plate. Ameloblastin-positive dental epithelial cells were detected following the temporal regulation of BMP4. Tooth-periodontium complex structures, which included teeth, a periodontal membrane, and alveolar bone, were formed when this epithelium was combined with mouse dental mesenchyme and transplanted into the renal capsules of nude mice. Micro-CT and H&E staining revealed that the generated tooth-periodontium complex structures shared a similar histological structure with normal mouse teeth. An optimized induction method was established to promote the differentiation of mES cells into dental epithelium by temporally controlling the function of BMP4. A novel tooth-periodontium complex structure was generated using the epithelium.

Child Nutrition - Multiple Languages

MedlinePlus

... Amarɨñña / አማርኛ ) Expand Section Foods For Healthy Teeth - English PDF Foods For Healthy Teeth - Amarɨñña / አማርኛ (Amharic) ... Arabic (العربية) Expand Section Foods For Healthy Teeth - English PDF Foods For Healthy Teeth - العربية (Arabic) PDF ...

Whitening non vital teeth – a case report

PubMed Central

Moraru, Iren; Ţuculină, Mihaela; Bătăiosu, Marilena; Gheorghiţă, Lelia; Diaconu, Oana

2012-01-01

Commonly used in cosmetic dentistry teeth whitening can be used combined with other restorative techniques during dental treatment. Non-vital teeth whitening is necessary whenever we need an improvement of their aspect, as it’s a known fact that these teeth can have a grey or pink-grey coloration when they are not correctly endodontical treated. PMID:24778849

Biological tooth replacement

PubMed Central

Sartaj, Rachel; Sharpe, Paul

2006-01-01

Teeth develop from a series of reciprocal interactions that take place between epithelium and mesenchyme during development of the mouth that begin early in mammalian embryogenesis. The molecular control of key processes in tooth development such as initiation, morphogenesis and cytodifferentiation are being increasingly better understood, to the point where this information can be used as the basis for approaches to produce biological replacement teeth (BioTeeth). This review outlines the current approaches, ideas and progress towards the production of BioTeeth that could form an alternative method for replacing lost or damaged teeth. PMID:17005022

Non-syndromic multiple supernumerary teeth in permanent dentition: a rare phenomenon

PubMed Central

Yadav, Rakesh Kumar; Rao, Jitendra; Yadav, Lakhya; Hasija, Mukesh

2013-01-01

Hyperdontia or supernumerary teeth in the absence of associated systemic condition or syndrome is an uncommon phenomenon. Non-syndromic supernumerary teeth need to have periodical radiographic observation. In the case of asymptomatic condition, as they impacted in the jaw, a careful examination is necessary because they may develop into pathological status such as dentigerous cysts. Surgical removal of such teeth is indicated if evidence of any pathologies, such as cystic lesion, resorption, delayed eruption, altered eruption and displacement of adjacent teeth, is evident or have occurred. PMID:23704431

[Cryopreservation of teeth].

PubMed

Zimmerli, Melanie; Filippi, Andreas

2010-01-01

After tooth loss dental implants or fixed prosthetic restorations are not indicated in children and adolescents due to incomplete maxillary and mandibular development. Cryopreservation is a method for long-term storage of healthy teeth which were removed for orthodontic reasons or due to traumatic origin. These preserved teeth can be used as autogenous replants or transplants after tooth loss. During transport to and from the freezing facilities prior to freezing the teeth are stored in a cell culture medium. The tooth is transferred into a freezing tube containing cell culture medium and cryoprotectant DMSO. Teeth autotransplanted after cryopreservation show vitality of the PDL cells. Usually no enamel and/or dentinal cracks can be observed. After tooth loss transplantation of cryopreserved teeth could be an effective and biological therapy for tooth replacement.

Idiopathic multiple impacted unerupted teeth: Case report and discussion

PubMed Central

Sujatha, G; Sivapathasundharam, B; Sivakumar, G; Nalinkumar, S; Ramasamy, M; Prasad, T Srinivasa

2012-01-01

Multiple impacted permanent teeth are usually related to syndromes, metabolic and hormonal disorders. However, in some cases, impaction of multiple teeth is not associated with any syndrome. In this report, we present a case of 17-year-old male patient with missing teeth. Radiographs revealed multiple impacted permanent teeth, though medical and family history along with physical examination was not suggestive of any syndromes. If other investigations are negative, an idiopathic case of multiple impacted teeth is suggested to be the possible diagnosis. The objective of this report is to increase awareness of such cases especially in the absence of hereditary/genetic/metabolic factors usually inherent in such scenarios. The patient management in such cases needs to be planned specifically from a multidisciplinary standpoint. PMID:22438652

Organized Emergence of Multiple-Generations of Teeth in Snakes Is Dysregulated by Activation of Wnt/Beta-Catenin Signalling

PubMed Central

Gaete, Marcia; Tucker, Abigail S.

2013-01-01

In contrast to mammals, most reptiles constantly regenerate their teeth. In the snake, the epithelial dental lamina ends in a successional lamina, which proliferates and elongates forming multiple tooth generations, all linked by a permanent dental lamina. To investigate the mechanisms used to control the initiation of new tooth germs in an ordered sequential pattern we utilized the polyphodont (multiple-generation) corn snake (Pantherophis guttatus). We observed that the dental lamina expressed the transcription factor Sox2, a multipotent stem cell marker, whereas the successional lamina cells expressed the transcription factor Lef1, a Wnt/β-catenin pathway target gene. Activation of the Wnt/β-catenin pathway in culture increased the number of developing tooth germs, in comparison to control untreated cultures. These additional tooth germs budded off from ectopic positions along the dental lamina, rather than in an ordered sequence from the successional lamina. Wnt/β-catenin activation enhanced cell proliferation, particularly in normally non-odontogenic regions of the dental lamina, which widely expressed Lef1, restricting the Sox2 domain. This suggests an expansion of the successional lamina at the expense of the dental lamina. Activation of the Wnt/β-catenin pathway in cultured snake dental organs, therefore, led to changes in proliferation and to the molecular pattern of the dental lamina, resulting in loss of the organised emergence of tooth germs. These results suggest that epithelial compartments are critical for the arrangement of organs that develop in sequence, and highlight the role of Wnt/β-catenin signalling in such processes. PMID:24019968

Teeth

MedlinePlus

... Privacy Policy Sitemap Learn Engage Donate About TSC Teeth Oral/dental health is a critical part of maintaining overall health in TSC. The teeth and gums in TSC individuals are slightly different ...

New syndromic form of benign hereditary chorea is associated with a deletion of TITF-1 and PAX-9 contiguous genes.

PubMed

Devos, David; Vuillaume, Isabelle; de Becdelievre, Alix; de Martinville, Berengère; Dhaenens, Claire-Marie; Cuvellier, Jean-Christophe; Cuisset, Jean-Marie; Vallée, Louis; Lemaitre, Marie-Pierre; Bourteel, Hélène; Hachulla, Eric; Wallaert, Benoit; Destée, Alain; Defebvre, Luc; Sablonnière, Bernard

2006-12-01

Benign hereditary chorea is a rare autosomal dominant disorder presenting with a childhood-onset and slowly progressive chorea. The objective of this study was to describe the clinical and genetic features of 3 patients who developed childhood-onset chorea. Three affected patients from three generations of a family with benign hereditary chorea associated with a multisystemic disorder of the basal ganglia, thyroid, lungs, salivary glands, bowels, and teeth. The TITF-1 gene was screened by microsatellite analysis, gene sequencing, and fluorescence in situ hybridization. Genetic analysis revealed a novel 0.9-Mb deletion on chromosome 14, which includes the TITF-1 and PAX9 genes. We have identified a novel deletion responsible for a new syndrome of benign hereditary chorea, including symptoms of brain-thyroid-lung syndrome associated with bowels, salivary glands, and teeth disorders. Associated signs, sometimes of slight expression, remain of high interest for the clinical and genetic diagnosis of benign hereditary chorea. Copyright 2006 Movement Disorder Society.

Rapid orthodontic treatment after the ridge-splitting technique--a combined surgical-orthodontic approach for implant site development: case report.

PubMed

Amato, Francesco; Mirabella, A Davide; Borlizzi, Diego

2012-08-01

This article presents a clinical case of bilateral partial edentulism in the posterior mandible with severe horizontal and moderate vertical bone atrophy. A new technique using rapid orthodontics after ridge splitting is presented. The split-crest technique was carried out using piezosurgical instruments in the first molar and second premolar areas to widen the bone crest and open a channel for tooth movement. Immediately after, orthodontic appliances were used to move the first premolars distally and the second molars mesially into the surgical site. The rationale was to facilitate and accelerate orthodontic movement of the teeth, which is otherwise difficult in a cortical knife-edged ridge. The bone defect was filled with the alveolar bone of the adjacent teeth that were moved into the surgically opened path. Adequate bone volume for implant placement was generated in the first premolar area. Implants were then inserted, and the patient was rehabilitated.

Fabrication of fixed implant prostheses using function bite impression technique (FBI technique).

PubMed

Suzuki, Yasunori; Shimpo, Hidemasa; Ohkubo, Chikahiro; Kurtz, Kenneth S

2012-10-01

The patient was partially edentulous, lacking both the first mandibular molars. The FBI and the conventional impression technique were used for the fabrication of implant-fixed prosthesis replacing the right and left molars, respectively. In the FBI technique, the definitive impression was made under occlusal force and functionally generated path (FGP) recording at the same time. The right and left occlusal contact areas were compared after completing the implant-fixed prosthesis rehabilitation. It has been suggested that accuracy of the impression and maxillomandibular registration is necessary to ensure a satisfactory long-term clinical outcome. The transfer of the exact position of the implants to the working cast is even more important because implants lack the mobility of natural teeth. There are displacement differences between implants and natural teeth under occlusal force. The FBI technique may compensate for this difference in accuracy. Using the FBI technique, a precise prosthesis could be produced by completing simultaneously the maxillomandibular registration, impression and FGP. Copyright © 2012 Japan Prosthodontic Society. All rights reserved.

Evolution of gremlin 2 in cetartiodactyl mammals: gene loss coincides with lack of upper jaw incisors in ruminants.

PubMed

Opazo, Juan C; Zavala, Kattina; Krall, Paola; Arias, Rodrigo A

2017-01-01

Understanding the processes that give rise to genomic variability in extant species is an active area of research within evolutionary biology. With the availability of whole genome sequences, it is possible to quantify different forms of variability such as variation in gene copy number, which has been described as an important source of genetic variability and in consequence of phenotypic variability. Most of the research on this topic has been focused on understanding the biological significance of gene duplication, and less attention has been given to the evolutionary role of gene loss. Gremlin 2 is a member of the DAN gene family and plays a significant role in tooth development by blocking the ligand-signaling pathway of BMP2 and BMP4. The goal of this study was to investigate the evolutionary history of gremlin 2 in cetartiodactyl mammals, a group that possesses highly divergent teeth morphology. Results from our analyses indicate that gremlin 2 has experienced a mixture of gene loss, gene duplication, and rate acceleration. Although the last common ancestor of cetartiodactyls possessed a single gene copy, pigs and camels are the only cetartiodactyl groups that have retained gremlin 2. According to the phyletic distribution of this gene and synteny analyses, we propose that gremlin 2 was lost in the common ancestor of ruminants and cetaceans between 56.3 and 63.5 million years ago as a product of a chromosomal rearrangement. Our analyses also indicate that the rate of evolution of gremlin 2 has been accelerated in the two groups that have retained this gene. Additionally, the lack of this gene could explain the high diversity of teeth among cetartiodactyl mammals; specifically, the presence of this gene could act as a biological constraint. Thus, our results support the notions that gene loss is a way to increase phenotypic diversity and that gremlin 2 is a dispensable gene, at least in cetartiodactyl mammals.

Dental worm disease.

PubMed

Sabbatani, Sergio; Fiorino, Sirio

2016-12-01

During human evolution, the period in which groups of humans stopped harvesting fruits and seeds growing wild and introduced the cultivation of cereals as well as the domestication of animals represents a very important event. This circumstance had a considerable impact on human pathocenosis, increasing the risk of infectious diseases of animal origin. The aim of this review was to summarise the archaeological and palaeo-pathological evidence in the literature concerning this topic. Starting from early prehistory (about 1.5 million years ago) up to the historical period, several authors have described the changes in human habits and the consequent changes in food supply, leading to the transition from a protein- to a carbohydrate-rich diet across a broad interval of time. This led to additional problems for human health. The increased accumulation of carbohydrate debris in the odonto-stomatological apparatus, without the appropriate use of hygiene in the oral cavity, increased the risk of infectious disease involving the mouth. Therefore, since the Neolithic period there has been a higher risk of tooth caries, abscesses, deep infection of the teeth roots, reaching also the mandibular and maxillary bone. Several hypotheses have been proposed by the distinct civilizations, which have alternated in the different ages, to explain the cause of these human health problems, including the idea that a "dental worm" could be involved in this process, such as in the Sumerian period. We describe and discuss further modifications of this theory, developed in Egypt, Assyria, Babylon, China, Greece, in Etruscan cities and in Rome in ancient times as well as in the Middle Ages, and the evolution of scientific thought on this topic in the past 300 years. In addition, the results of some palaeo-pathological studies, which were performed on human remains, such as the maxillary bone and teeth, mainly in different geographical areas in Italy, are examined and reported.

New material of Pseudoloris parvulus (Microchoerinae, Omomyidae, Primates) from the Late Eocene of Sossís (northeastern Spain) and its implications for the evolution of Pseudoloris.

PubMed

Minwer-Barakat, Raef; Marigó, Judit; Femenias-Gual, Joan; Moyà-Solà, Salvador

2015-06-01

The species Pseudoloris parvulus, identified in several Middle and Late Eocene European sites, was previously known in the Iberian Peninsula by a single mandible preserving P4-M3 from Sossís (Southern Pyrenean Basins, northeastern Spain), described in the 1960s. Further field work at this Late Eocene site has led to the recovery of a large number of mammal remains, including the additional material of P. parvulus described in this paper. Some specimens of P. parvulus from this locality have also been recently found in the collections of the Naturhistorisches Museum Basel, Switzerland. The whole sample consists of 11 mandible fragments including several teeth, three upper dental series and nearly 80 isolated teeth including all of the dental elements, and represents the most complete sample of the genus described from the Iberian Peninsula. This abundant material allows us to provide an emended diagnosis for the species and to observe several directional changes in the dental morphology of the lineage including the species Pseudoloris saalae, Pseudoloris isabenae, Pseudoloris pyrenaicus and P. parvulus. These directional changes include the progressive reduction of the paraconid in the lower molars and the increase in size of the hypocone, metaconule and paraconule in the upper molars. Moreover, despite the overall resemblance among all of the samples ascribed to P. parvulus, we also recognize some differences, particularly an increase in size and better development of the hypocone from the oldest populations of the species, such as Le Bretou, to the most recent ones, like Sossís and Perrière. Therefore, this study sheds new light on the evolution of this genus, which inhabited Europe from the Middle Eocene to the Early Oligocene. Copyright © 2015 Elsevier Ltd. All rights reserved.

The giant keyhole limpet radular teeth: A naturally-grown harvest machine

PubMed Central

Ukmar-Godec, Tina; Kapun, Gregor; Zaslansky, Paul; Faivre, Damien

2015-01-01

The limpet radula is a feeding organ, which contains more than 100 rows of teeth. During their growth the teeth mature and advance in position along the radula. The simpler doccoglossan radulae operate by grinding rocky substrates, extracting the algae by rasping and scraping with the teeth functioning as shovels. Less is known about the rhipidoglossan radulae, used as rakes or brooms that brush and collect loose marine debris. This type of radula is found in the giant keyhole limpet (Megathura crenulata). The large size of this organism suggests that the rhipidoglossan radula entails a technological superiority for M. crenulata in its habitat. The structure and function of the radulae teeth have however not been reported in detail. Using a combination of 2D and 3D microscopy techniques coupled with amino acid analysis and X-ray scattering, we reveal the working components of M. crenulata’s radula. It is characterized by numerous marginal teeth surrounding a pair of major hook-like lateral teeth, two pairs of minor lateral teeth and a large central tooth. The mature major lateral teeth show pronounced signs of wear, which gradually increase towards the very front end of the radula and are evidence for scraping. An abrupt change in the amino acid composition in the major lateral teeth and the concurrent formation of a chitinous fiber-network mark the onset of tooth maturation. In comparison to the simpler rock-scraping doccoglossate limpets, the radula of M. crenulata forms an elaborate feeding apparatus, which can be seen as a natural harvest machine. PMID:26433029

Evaluation of odontological assistance to soldiers going on a mission, and prognostication of their odontological problems.

PubMed

Kelbauskiene, Nijole; Kelbauskas, Eduardas; Nedzelskiene, Irena

2006-01-01

The aim of the study was to evaluate the condition of the oral cavity in soldiers going on a military mission, the level of odontological assistance to them, and to prognosticate possible odontological problems during the mission period. We studied 50 soldiers going on a military mission in Iraq. During the study we applied odontological examination and panoramic imaging. We found that soldiers' teeth were treated, and they received comprehensive odontological assistance: 18% of soldiers had their teeth restored with single crowns and bridges, and 56% of soldiers had underwent endodontic treatment of their teeth. During the radiological examination we diagnosed individual cases of dental caries on the contact surfaces of teeth, and determined the level of the filling of root canals of endodontically treated teeth and the relationship of this level with radiological changes in apical periodontium. 67.3% of teeth had incompletely filled root canals, and radiological changes in their apical periodontium were reliably more frequent (80.6%) than in the apical periodontium of teeth with completely filled root canals (19.4%) (p<0.001). Of significant concern is the fact that frequently teeth with incompletely filled root canals and apical periodontal damage are restored using radical post-core and crowns. Radiological examination showed that in teeth with signs of chronic apical periodontitis and insufficient quality of filling, the condition may become more acute and cause odontological problems. A part of odontological problems in soldiers may be caused by incorrect position of the third molars in the jaw and possible aggravated eruption of these teeth.

Pulpal response in electrothermal debonding.

PubMed

Takla, P M; Shivapuja, P K

1995-12-01

An alternative method to conventional bracket removal that minimizes the potential for ceramic bracket failure as well as trauma to the enamel surface is electrothermal debonding (ETD). However, the potential for pulpal damage using ETD on ceramic brackets still needs assessment. The purpose of this research is to investigate and assess any pulpal damage caused by ETD. Ten patients requiring four premolar extractions each were randomly selected (5 boys and 5 girls). Ceramic brackets were bonded to experimental and control teeth. A total of 30 teeth were used to provide histologic material of the human pulp. Fifteen teeth were extracted 24 hours after ETD, seven were extracted 28 to 32 days after ETD, and eight were the control teeth and debonded by a conventional method, with pliers. The pulp was normal in most cases in the control group. There was significant hyperemia seen 24 hours after debonding in teeth debonded by ETD. Teeth extracted 30 days afer ETD showed varied responses, ranging from complete recovery in some cases to persistence of inflammation and pulpal fibrosis. Teeth subjected to the conventional debonding were normal histologically. The teeth in our research were healthy teeth with a rich blood supply and were from a younger age group. Patients with compromised teeth that have large restorations or a questionable pulpal status could behave more adversely to this significant amount of heat applied. In compromised cases and on older patients, performing pulp vitality tests before ETD may inform the operator about the status of the pulp and thereby prevent the potential for pulpal damage.(ABSTRACT TRUNCATED AT 250 WORDS)

The association between current unemployment and clinically determined poor oral health.

PubMed

Al-Sudani, Fouad Y H; Vehkalahti, Miira M; Suominen, Anna L

2015-08-01

The aim of this study was to assess whether current unemployment was associated with poor oral health and whether there was a difference in oral health according to the duration of the current unemployment. As part of the Health 2000 Survey in Finland (a nationwide comprehensive health examination survey), we used its data based on interviews, questionnaires, and clinical oral examinations of the 30- to 63-year-old respondents (n = 4773). Current employment status was measured in its dichotomous form, employed versus unemployed, and length of current unemployment was classified into four categories. We measured oral health in terms of numbers of missing teeth, of sound teeth, of filled teeth, of decayed teeth, and of teeth with deepened periodontal pockets (≥4 mm, ≥6 mm). Poisson regression models were fitted for all oral health outcomes except number of decayed teeth, for which negative binomial regression model was used. Oral health-related behaviors and sociodemographic and socioeconomic factors were added to the analyses. The unemployed subjects had higher numbers of missing teeth, of decayed teeth, and of teeth with periodontal pockets than the employed ones. The association remained consistent even after adjustments. Oral health-related behaviors seemed to mediate the association. We found no association between unemployment and number of sound teeth. Current long-term unemployment showed stronger association with poor oral health than short-term among women. The unemployed can be considered as a risk group for poor oral health. Oral healthcare should be reoriented toward those who are unemployed. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Structure of the Bacterial Community in Different Stages of Early Childhood Caries.

PubMed

Ximenes, Marcos; Armas, Rafael Dutra de; Triches, Thaisa Cezária; Cardoso, Mariane; Vieira, Ricardo de Souza

2018-01-15

To characterise in vivo the structure of bacterial communities in decayed and sound primary teeth. Samples of biofilms were collected from three groups of patients with complete and exclusively primary dentition (n = 45): G1: sound teeth (n = 15); G2: enamel lesion (n = 15); G3: dentin lesion (n = 15). DNA was extracted (CTAB 2%) from the biofilm, the partial 16S rRNA gene was amplified with Bacteria Universal Primers (BA338fGC - UN518r) and subjected to DGGE (denaturing gradient gel electrophoresis). Multidimensional scaling and ANOSIM (analysis of similarity) were employed to determine the structure of the bacterial communities. The amplicon richness was determined by averaging amplicons, with the differences between treatments determined with ANOVA, while means were compared using Tukey's test (p < 0.05). Compared to sound teeth, a greater variety of bacterial communities was found in decayed teeth. Despite the differences between the bacterial communities of sound teeth and decayed teeth, the Venn diagram showed that the samples had 38 amplicons in common. Greater amplicon richness was observed in samples of decayed teeth (enamel: 20.5 ± 2.7; dentin: 20.1 ± 2.8) compared with the sound samples (12.0 ± 4.3) (p <0.05), indicating enhanced growth for specific groups of bacteria on decayed teeth. Although there is less bacterial diversity on sound than ECC-decayed teeth, the bacterial communities are very similar.

A colourimetric evaluation of the effect of bacterial contamination on teeth stained with blood in vitro: Evaluation of the efficacy of two different bleaching regimes.

PubMed

Wang, S; Cathro, P; Heithersay, G; Briggs, N; Ratnayake, J; Zilm, P

2018-02-27

Tooth discolouration could occur due to bacterial contamination in traumatized teeth. Hydrogen peroxide is the commonly used bleaching agent. However, due to concerns over safety, alternative bleaching regimes such as sodium perborate (S) and thiourea-hydrogen peroxide (T) have been investigated. Apices resected and pulp extirpated 99 premolars were divided into two groups. Group 1 and 2 was injected with blood and blood/bacteria, stored anaerobically for 35 days. The two groups were treated by bleaching with water, S or T. Teeth were rebleached after 7 days. Colourimetric evaluation was assessed using digital imaging, CasMatch standardization and CIE L*a*b colour system preoperatively, 35 days of staining and 7 and 14 of bleaching. A linear mixed model with fixed effects of time, group and bleach was used to examine colour difference. Blood-stained teeth were significantly redder and darker on day 35 compared with blood/bacteria-stained teeth. After bleaching, blood-stained teeth retained significant redness compared with blood/bacteria-stained teeth using either S or T. T produced a significantly whiter shade in both the groups after 14 days. Blood-stained teeth were significantly darker and red compared with blood/bacteria-stained teeth. T bleaching regime was more effective than S. © 2018 Australian Dental Association.

[Three-dimensional finite element analysis of maxillary anterior teeth retraction force system in light wire technique].

PubMed

Zhang, Xiangfeng; Wang, Chao; Xia, Xi; Deng, Feng; Zhang, Yi

2015-06-01

This study aims to construct a three-dimensional finite element model of a maxillary anterior teeth retraction force system in light wire technique and to investigate the difference of hydrostatic pressure and initial displacement of upper anterior teeth under different torque values of tip back bend. A geometric three-dimensional model of the maxillary bone, including all the upper teeth, was achieved via CT scan. To construct the force model system, lingual brackets and wire were constructed by using the Solidworks. Brackets software, and wire were assembled to the teeth. ANASYS was used to calculate the hydrostatic pressure and the initial displacement of maxillary anterior teeth under different tip-back bend moments of 15, 30, 45, 60, and 75 Nmm when the class II elastic force was 0.556 N. Hydrostatic pressure was concentrated in the root apices and cervical margin of upper anterior teeth. Distal tipping and relative intrusive displacement were observed. The hydrostatic pressure and initial displacement of upper canine were greater than in the central and lateral incisors. This hydrostatic pressure and initial intrusive displacement increased with an increase in tip-back bend moment. Lingual retraction force system of maxillary anterior teeth in light wire technique can be applied safely and controllably. The type and quantity of teeth movement can be controlled by the alteration of tip-back bend moment.

The decade of overdentures: 1970-1980.

PubMed

Fenton, A H

1998-01-01

Jaw bones resorb when teeth are lost. People cannot function as well with complete dentures compared with their natural teeth. As more people are living longer and these cumulative effects become increasingly documented, dentists in the 1970s attached more importance to keeping teeth. The concept of overdentures developed as a simple and economic alternative to prolong the retention and function of the last few teeth in a compromised dentition. The previous option was extensive fixed prosthodontics. An overdenture is a complete or removable partial denture that has one or more tooth roots to provide support. Rather than extracting all compromised teeth, the crowns, and pulpal tissue of selected teeth (usually two anterior teeth) are removed. The remaining root projecting through the mucosa is restored and/or contoured. With the crown removed, there is space to cover the area with a denture. The root has less mobility, and its retention retards bone resorption. Overdentures with roots are more stable, and patients can chew better than with dentures supported on residual alveolar bone and mucosal tissue alone. Keeping even a few teeth has a strong psychological value for some patients. Patients who have lost teeth, adjacent tissue, and bone need replacement of more oral structures than tooth crowns alone can provide. A complete denture with flange contours can restore tissue and appearance. The conventional tooth-supported overdenture concept continues to be an accepted treatment modality and has now been adapted to implants.

Contribution of cone beam computed tomography to the detection of apical root resorption after orthodontic treatment in root-filled and vital teeth.

PubMed

Castro, Iury; Valladares-Neto, José; Estrela, Carlos

2015-09-01

To investigate whether root-filled teeth are similar to vital pulp teeth in terms of apical root resorption (ARR) after orthodontic treatment. An original sample of cone beam computed tomography (CBCT) images of 1256 roots from 30 orthodontic patients were analyzed. The inclusion criteria demanded root-filled teeth and their contralateral vital teeth, while teeth with history of trauma had to be excluded to comply with exclusion criteria. CBCT images of root-filled teeth were compared before and after orthodontic treatment in a split-mouth design study. Tooth measurements were made with multiplanar reconstruction using axial-guided navigation. The statistical difference between the treatment effects was compared using the paired t-test. Twenty posterior root-filled teeth and their contralaterals with vital pulp were selected before orthodontic treatment from six adolescents (two boys and four girls; mean [SD] age 12.8 [1.8] years). No differences were detected between filled and vital root lengths before treatment (P  =  .4364). The mean differences in root length between preorthodontic and postorthodontic treatment in filled- and vital roots were -0.30 mm and -0.16 mm, respectively, without any statistical difference (P  =  .4197) between them. There appears to be no increase in ARR after orthodontic treatment in root-filled teeth with no earlier ARR.

Vranaropaka effect of Laksha Churna with Madhu on wound after removal of Danta Sharkara.

PubMed

Maurya, Mridulata; Maurya, Dinesh K

2012-01-01

According to Sushruta, disease in which plaque formed on teeth and hardened by the action of deranged Vayu, lies in a crystallized form at root of teeth is called as Dantasharkara. According to Vagbhata, accumulation of dirt on teeth by not cleaning them daily or of Kapha dehydrated by Vata adhering to the teeth, becoming hard and emits bad odor is known as Dantasharkara (Tartar). Tartar manifests as a deposit of inorganic salts composed primarily of calcium carbonate and phosphate mixed with food debris, bacteria and desquamated epithelial cells which reduce the quality of whiteness and strength of the teeth. Teeth loss is also not uncommon in tartar sufferers. Such deposits tend to destroy the healthy growth and function of teeth. It should be removed in such a way as not to hurt the roots of the teeth and then parts should be rubbed (Pratisarana) with Laksha Churna and Madhu. In trial group, management of tartar is attempted by local rubbing of Laksha Churna with Madhu on the surface of teeth and gingiva. Regeneration, repair and new attachment are the aspects of periodontal healing that are achieved by gingival physiotherapy on scaling wound. Pratisarana of Laksha Churna with Madhu is easy to apply, cost effective and free from side effects in comparison to systemic use of modern drugs.

Revitalization of open apex teeth with apical periodontitis using a collagen-hydroxyapatite scaffold.

PubMed

Nevins, Alan J; Cymerman, Jerome J

2015-06-01

An enhanced revision of the revitalization endodontic technique for immature teeth with apical periodontitis has been described. It includes the addition of collagen-hydroxyapatite scaffold to the currently practiced revascularization technique. Four cases treated in series are presented in this report, 1 case involving 2 teeth. Periapical diagnoses of immature teeth included "asymptomatic apical periodontitis," "symptomatic apical periodontitis," and "acute apical abscess." Additionally, 1 fully developed tooth that had undergone root canal treatment that failed had a periapical diagnosis of acute apical abscess. An established revascularization protocol was used for all teeth. In addition to stimulating blood clots, all teeth were filled with collagen-hydroxyapatite scaffolds. Periapical radiolucencies healed in all teeth, and diffuse radiopacity developed within the coronal portions of canal spaces. Root development with root lengthening occurred in the immature nonvital maxillary premolar that had not undergone prior treatment. The technique of adding a collagen-hydroxyapatite scaffold to the existing revitalization protocol has been described in which substantial hard tissue repair has occurred. This may leave teeth more fully developed and less likely to fracture. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

[A clinical study of gelatamp colloidal silver gelatin sponge on preventing the complication of teeth extraction].

PubMed

Cai, Yong-hai; Lu, Chang-shou

2008-10-01

To study the clinical effect of Gelatamp colloidal silver gelatin sponge on preventing the complication of teeth extraction. 672 teeth were divided into experimental group and control group semi-randomly. All teeth were extracted after local anesthesia and sockets were cleaned. Gelatamp colloidal silver gelatin sponge was implanted into socket in experimental group and nothing was implanted into alveolar socket in control group. The complication of teeth extraction was observed on 0.5 h, 2 d and 7 d after extraction. The incidence rate of complication was calculated. The incidence rate of complication of teeth extraction in experimental group was 7.72%, which was lower than that of control group (24.43%). There was significant difference in the incidence rates of complication between experimental group and control group (P < 0.05). The incidence rate of bleeding, infection, pain, swelling and dry socket after teeth extraction in experimental group was lower than those of control group, and the difference between them was statistically significant (P < 0.05). The results demonstrate that Gelatamp colloidal silver gelatin sponge can prevent the occurrence of complication of teeth extraction, this can be used in clinic.

Fluorescence properties of human teeth and dental calculus for clinical applications

NASA Astrophysics Data System (ADS)

Lee, Yong-Keun

2015-04-01

Fluorescent emission of human teeth and dental calculus is important for the esthetic rehabilitation of teeth, diagnosis of dental caries, and detection of dental calculus. The purposes of this review were to summarize the fluorescence and phosphorescence of human teeth by ambient ultraviolet (UV) light, to investigate the clinically relevant fluorescence measurement methods in dentistry, and to review the fluorescence of teeth and dental calculus by specific wavelength light. Dentine was three times more phosphorescent than enamel. When exposed to light sources containing UV components, the fluorescence of human teeth gives them the quality of vitality, and fluorescent emission with a peak of 440 nm is observed. Esthetic restorative materials should have fluorescence properties similar to those of natural teeth. Based on the fluorescence of teeth and restorative materials as determined with a spectrophotometer, a fluorescence parameter was defined. As to the fluorescence spectra by a specific wavelength, varied wavelengths were investigated for clinical applications, and several methods for the diagnosis of dental caries and the detection of dental calculus were developed. Since fluorescent properties of dental hard tissues have been used and would be expanded in diverse fields of clinical practice, these properties should be investigated further, embracing newly developed optical techniques.

Fluorescence properties of human teeth and dental calculus for clinical applications.

PubMed

Lee, Yong-Keun

2015-04-01

Fluorescent emission of human teeth and dental calculus is important for the esthetic rehabilitation of teeth, diagnosis of dental caries, and detection of dental calculus. The purposes of this review were to summarize the fluorescence and phosphorescence of human teeth by ambient ultraviolet (UV) light, to investigate the clinically relevant fluorescence measurement methods in dentistry, and to review the fluorescence of teeth and dental calculus by specific wavelength light. Dentine was three times more phosphorescent than enamel. When exposed to light sources containing UV components, the fluorescence of human teeth gives them the quality of vitality, and fluorescent emission with a peak of 440 nm is observed. Esthetic restorative materials should have fluorescence properties similar to those of natural teeth. Based on the fluorescence of teeth and restorative materials as determined with a spectrophotometer, a fluorescence parameter was defined. As to the fluorescence spectra by a specific wavelength, varied wavelengths were investigated for clinical applications, and several methods for the diagnosis of dental caries and the detection of dental calculus were developed. Since fluorescent properties of dental hard tissues have been used and would be expanded in diverse fields of clinical practice, these properties should be investigated further, embracing newly developed optical techniques.

Something to sink your teeth into: The presence of teeth augments ERPs to mouth expressions.

PubMed

daSilva, Elizabeth B; Crager, Kirsten; Geisler, Danika; Newbern, Powell; Orem, Benjamin; Puce, Aina

2016-02-15

If the whites of the sclera can impact neural processing of eye expressions (Hardee, Thompson, & Puce, 2008; Whalen et al., 1998), do seen teeth affect neural responses to mouth expressions? Twenty participants (10 females; ages 22-31) viewed avatar mouth images depicting grimaces, smiles and open mouth expressions that were presented with and without teeth. A continuous 256 channel electroencephalogram (EEG) was recorded while subjects completed two tasks: an implicit task evaluating stimulus color and an explicit task evaluating mouth expression valence. Event related potential (ERP) peak amplitudes and latencies and area under the curve (AUC) were measured in individual subject averaged ERPs. Statistical testing revealed a main effect of the presence of Teeth for P100, N170, and vertex positive potential (VPP) amplitudes and for slow positive wave (SPW) AUC. Task by teeth interactions occurred for P250 amplitude, underscoring how explicit task demands can influence neural processing. Arousal ratings co-varied with teeth presence, suggesting that low-level visual features such as teeth may drive the saliency of emotional expressions, and lie at the core of differences in neural processing to different emotional expressions. Copyright © 2015 Elsevier Inc. All rights reserved.

Failure of tooth eruption in two patients with cerebral palsy and bruxism-a 10-year follow-up: a case report.

PubMed

Staufer, Kirsten; Hamadeh, Sinan; Gesch, Dietmar

2009-01-01

The aim of this paper was to analyze delayed tooth eruption in two children with cerebral palsy who had severe bruxism and to determine whether treatment could influence tooth eruption and alignment. Extraction of primary teeth was carried out and orthodontic treatment was considered due to severe tooth wear of primary teeth, lack of space, and development of a class III malocclusion. Analysis was based on clinical examination, photographs, radiographs, and dental casts. In both patients, early mixed dentition was delayed for more than 5 years. Calcification and root development of posterior permanent teeth corresponded with the chronological age. Root resorption of the severely abraded primary teeth and eruption of their successors were delayed or failed. Eruption of permanent teeth occurred slowly after primary teeth were extracted. Orthodontic treatment succeeded in one patient, achieving a normal overjet in combination with a successful orofacial therapy. The disturbed exfoliation of abraded primary teeth and failure of tooth eruption of the posterior teeth could be linked to the systemic pathology and to bruxism. At age 20, eruption of the canines and premolars remained questionable.

Morphology of the larval shell of three oyster species of the genus Crassostrea Sacco, 1897 (Bivalvia: Ostreidae).

PubMed

Christo, S W; Absher, T M; Boehs, G

2010-08-01

In this study we describe the morphology of the larval shell of three oyster species of Crassostrea genus. Two species, C. rhizophorae and C. brasiliana, are native to the Brazilian coast, and C. gigas is an introduced species. Samples of laboratory reared larvae, obtained through artificial fertilisation, were collected at intervals during the cultivation process for analysis using Scanning Electron Microscopy (SEM). Prodissoconch morphology was observed in relation to the presence, position, form and number of teeth in the three larval stages: D-shaped larva, umbo larva and pediveliger. Characteristic of D-shaped larvae of C. rhizophorae was the total absence of teeth in the provinculum area while C. brasiliana and C. gigas had two anterior and two posterior teeth in each valve. In the umbo larval phase, the three species had the same number of teeth in each valve: two posterior and two anterior teeth in the right valve and three posterior and three anterior in the left valve. In the pediveliger stage the three species could be differentiated by the number of anterior teeth of the right valve: C. rhizophorae had two teeth, C. brasiliana one tooth and C. gigas three teeth.

ABO blood grouping from hard and soft tissues of teeth by modified absorption-elution technique.

PubMed

Ramnarayan, Bk; Manjunath, M; Joshi, Anagha Ananth

2013-01-01

Teeth have always been known as stable tissue that can be preserved both physically and chemically for long periods of time. Blood group substances have been known to be present in both the hard and soft tissues of the teeth. This study aimed at detection of ABO blood group substances from soft and hard tissues of teeth and also to evaluate the reliability of teeth stored for a relatively long period as a source of blood group substances by absorption-elution technique with some modifications. Blood group obtained from the teeth was compared with those obtained from the blood sample. Pulp showed a very large correlation in both fresh and long-standing teeth though it decreased slightly in the latter. Hard tissue showed a large correlation in both the groups indicating that hard tissue is quite reliable to detect blood group and that there is no much difference in the reliability in both the groups. However, combining pulp and hard tissue, correlation is moderate. Correlation of blood grouping with the age, sex, and jaw distribution was carried out. Blood group identification from hard and soft tissues of teeth aids in the identification of an individual.

Dental Treatment Needs among Children and Adolescents Residing in an Ugandan Orphanage.

PubMed

Rubin, Pessia Friedman; Winocur, Ephraim; Erez, Assaf; Birenboim-Wilensky, Ravit; Peretz, Benjamin

Previous studies focused on the dental caries status of East African children and not on their overall dental needs. Urban children consume more sugar-rich foods. To assess overall dental treatment needs of children living in an orphanage in Uganda. Teeth were diagnosed as needing treatment by obvious frank carious lesions (WHO criteria), temporary fillings, staining, or very deep pit and/or fissures possibly requiring sealants. Calculus or crowding in the mandibular anterior region and evidence of tooth fractures were recorded, as were signs of wear on the mandibular molars and canines and the maxillary incisors. Most of the primary teeth (64%) required no dental treatment, but almost all (98%) of the permanent teeth did. A mean (±standard deviation) of 4.81±1.92 permanent teeth required treatment. The mean number of missing teeth was 0.47. Thirty-one children (20.2%) had crowding, 52 (34%) had calculus, and 49 (32%) had signs of attrition on primary and permanent molar teeth (45 enamel only and 4 enamel and dentin). Most of the primary teeth required no dental treatment, while the vast majority of permanent teeth did, possibly in association with high sugar cane consumption and poor brushing habits among older children.

Reasons for extraction in primary teeth among 5-12 years school children in Haryana, India- A cross-sectional study.

PubMed

Bansal, Mohit; Gupta, Nidhi; Gupta, Preety; Arora, Vikram; Thakar, Sahil

2017-04-01

Due to high prevalence of oral diseases extraction of primary teeth is a common and a major concern in developing countries. These teeth are given least importance as they are believed to shed off automatically, thus leading to serious problems like crowding and malocclusion. A cross sectional study was carried out among children aged 5 to 12 years among 1347 children. The data was recorded on a prestructured questionnaire. Reasons for extraction of teeth were based on Kay and Blinkhorn criteria. 20.4% children were having tooth loss due to various reasons. The main reason for extraction was found to be caries in 64.3% followed by trauma in maxillary teeth among 43.02% of children. Presence of early loss of primary teeth result in occlusal disturbances and space loss among children. Hence, proper treatment regimens must be followed by the dental professionals and should be the need of the hour. Key words: Extraction, children, primary teeth, caries.

Characteristic Examination of New Synchronous Motor that Composes Craw Teeth of Soft Magnetic Composite

NASA Astrophysics Data System (ADS)

Enomoto, Yuji; Ito, Motoya; Masaki, Ryozo; Asaka, Kazuo

We examined the claw type teeth motor as one application of the soft magnetic composite to a motor core. In order to understand quantitatively the characteristics of the claw type teeth motor, we used the 3-dimensional electromagnetic field analysis to predict its characteristics in advance and manufactured a trial motor to estimate it. And we examined the advantages of the claw type teeth motor comparing with a conventional slot type motor. The results are: 1. By using the 3-dimensional electromagnetic field analysis, it is able to estimate with high accuracy the characteristics of the 3-phase permanent magnet synchronous claw type teeth motor having a core composed of the soft magnetic composite. 2. The claw type teeth motor is able to achieve about 20% higher output than a conventional slot type motor having an electromagnetic steel core, while both volumes are equal. 3. The motor efficiency of the claw type teeth motor is about 3.5% higher than the conventional motor.

Teeth grinding, oral motor performance and maximal bite force in cerebral palsy children.

PubMed

Botti Rodrigues Santos, Maria Teresa; Duarte Ferreira, Maria Cristina; de Oliveira Guaré, Renata; Guimarães, Antonio Sergio; Lira Ortega, Adriana

2015-01-01

Identify whether the degree of oral motor performance is related to the presence of teeth grinding and maximal bite force values in children with spastic cerebral palsy. Ninety-five spastic cerebral palsy children with and without teeth grinding, according to caregivers' reports, were submitted to a comprehensive oral motor performance evaluation during the feeding process using the Oral Motor Assessment Scale. Maximal bite force was measured using an electronic gnathodynamometer. The teeth grinding group (n = 42) was younger, used anticonvulsant drugs, and was more frequently classified within the subfunctional oral motor performance category. Teeth grinding subfunctional spastic cerebral palsy children presented lower values of maximal bite force. The functional groups showing the presence or absence of teeth grinding presented higher values of maximal bite force compared with the subfunctional groups. In spastic cerebral palsy children, teeth grinding is associated with the worse oral motor performance. © 2015 Special Care Dentistry Association and Wiley Periodicals, Inc.

Pulp calcification in traumatized primary teeth: prevalence and associated factors.

PubMed

Mello-Moura, A C V; Bonini, G A V C; Zardetto, C G D C; Rodrigues, C R M D; Wanderley, M T

2011-01-01

To establish the prevalence of pulp calcifications in 946 patients at the Research and Clinical Center of Dental Trauma in Primary Teeth. The clinical and radiographic records of l675 traumatized primary teeth were evaluated. Statistical analysis was performed using chi-square and univariate logistic regression. 197 (20.8%) patients showed pulp calcification (PC). A total of 250 (14.9%) calcified teeth were observed In most teeth, PC appeared within the first 12 months following trauma. PC prevalence was higher in cases of repeated trauma (29.6%) than in single trauma (16.4%), p < 0.05, with a 2.14 chance of showing pulp calcification when a child suffered recurrent trauma. Most teeth showing calcified pulp, suffered trauma to the supportive tissue (67.4%), being statistically significant in relation to the trauma to dental tissue (p < 0.05). PC is a sequelae in cases of trauma to the primary dentition; teeth that suffered recurrent traumatic injuries show higher risk of presenting.

Orthodontic correction of a transposed maxillary canine and first premolar in the permanent dentition.

PubMed

Nishimura, Kazuaki; Nakao, Kimihisa; Aoki, Taijyu; Fuyamada, Mariko; Saito, Keisuke; Goto, Shigemi

2012-10-01

The patient was a 16-year-old Japanese girl whose chief complaints were crowding and transposition of the maxillary canine and first premolar. A setup model was used to preoperatively align the teeth in their transposed positions. The amount of postoperative reshaping was estimated for the occlusal surfaces of the teeth. However, the patient did not wish to have her teeth reduced by reshaping or to have composite materials for restorative camouflage. Because she strongly expected alignment of her teeth in the correct intra-arch position, her transposed teeth were corrected without extraction of the transposed teeth. Cone-beam computed tomography was used to obtain more detailed information about the transposition, and the direction of tooth movement was examined. Although the duration of the treatment was long, both the crowns and the roots of the transposed teeth were aligned correctly. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Improvement of age estimation using amino acid racemization in a case of pink teeth.

PubMed

Ohtani, S; Yamada, Y; Yamamoto, I

1998-03-01

Age was estimated from pink teeth using racemization of dentinal aspartic acid. Materials for identification were two lower second premolars. The body was determined to be that of a 40-year-old man; however, the age of the decedent had been estimated to be 29 and 30 years by the conventional method and 30 years from findings in the oral cavity. To clarify the cause of this difference, the powdered teeth were further washed in 0.01 mol/L hydrochloric acid. The racemization ratio (D/L ratio) of ordinary white teeth from persons of known age was slightly lower than that before washing, whereas that of the teeth used for identification was higher than before washing. The calculated age of the decedent using the racemization ratio of his teeth was between 36 and 37 years. These results suggest that age estimated from pink teeth is probably underestimated, but a more accurate age estimate can be obtained after adequate washing.

Autotransplantation donor tooth site harvesting using piezosurgery

PubMed Central

Ylikontiola, Leena P.; Sándor, George K.

2016-01-01

Background: The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. Methods: A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Results: Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Conclusions: Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes. PMID:27563612

Teething Tots

MedlinePlus

... with liquid inside because they may break or leak. If you use a teething ring, chill it ... could cause the plastic to get damaged and leak chemicals. Teething biscuits and frozen or cold food ...

Teething myths among community health officers.

PubMed

Denloye, O; Bankole, O O; Aderinokun, G A

2005-03-01

Many symptoms are attributed to teething in infants as a result of myths and opinions of people in the community. These myths have given false security with the belief that these symptoms are part of the teething process. The purpose of the study was to investigate the beliefs and practices of Community health Officers about teething. 60% of the respondents whose responses were analyzed believed that children have systemic problems during teething periods. Fever and diarrhea were the most frequent symptoms associated with teething. As health care providers at the community level, there is a need for this cadre of health care providers to separate cultural beliefs from scientific and proven medical practices. This can be achieved by their attendance at regular refresher courses organized for them after their graduation.

Shaping Cutter Original Profile for Fine-module Ratchet Teeth Cutting

NASA Astrophysics Data System (ADS)

Sharkov, O. V.; Koryagin, S. I.; Velikanov, N. L.

2018-03-01

The methods for determining geometric characteristics of a theoretical original profile of the cutter for cutting ratchet teeth with a module of 0.3–1.0 mm are considered in the article. Design models describing the shaping process of cutting edges of cutter teeth are developed. Systems of expressions for determining coordinates of the points of front and back edges of cutter teeth; the workpiece angles of rotation during the cutting process; the minimum cutter radius are received. The basic data when using the proposed technique are: radii of circumferences passing through cavities of cutter teeth and external cut teeth; the gradient angle and length of straight section of the front edge of a cut tooth; angles of rotation of the cutter and the workpiece at the moment of shaping.

Multiple supernumerary teeth associated with an impacted maxillary central incisor: Surgical and orthodontic management

PubMed Central

Yeluri, Ramakrishna; Hegde, Manjunath; Baliga, Sudhindra; Munshi, Autar Krishen

2012-01-01

Various anomalies in the size, shape, number, structure and eruption of the teeth are often observed clinical conditions. Supernumerary teeth can be found in almost any region of the dental arch, and most of the times they are asymptomatic, and are routinely found during radiographic evaluation. The most common cause of impacted maxillary incisors is the presence of the supernumerary teeth. This paper describes a case of multiple supernumerary teeth associated with an impacted permanent maxillary central incisor in an 11-year old child along with its surgical and orthodontic management. PMID:22919229

Molar-incisor-hypomineralisation (MIH). Retrospective clinical study in Greek children. I. Prevalence and defect characteristics.

PubMed

Lygidakis, N A; Dimou, G; Briseniou, E

2008-12-01

This was to evaluate the prevalence and the clinical characteristics of MIH in a group of Greek children. During the years 2003--2005, all MIH cases diagnosed according to the recently set criteria were selected from the new patients clinic of a Community Dental Centre for Children (Athens). Age, gender and teeth involved were recorded. The severity of MIH was determined collectively by dividing the affected teeth in two groups; a) mild defect (demarcated opacities) and b) moderate/severe defect (enamel breakdown and atypical restorations). Evaluation of the distribution of the affected teeth within MIH cases was performed in a separate group of 225 affected children aged 8-12 years with their entire 12 'index' teeth erupted. From the 3,518, 5.5 to 12 year old children that were examined, there were 360 (10.2%) children with MIH, 211 (58.6%) females and 149 (41.4%) males, with 1,926 affected teeth, 1,231 molars and 695 incisors. In the molars group, maxillary molars were more frequently affected (87.8/90.3%) than mandibular (81.7/82.2%). In the central incisor group, maxillary teeth were also more frequently affected (50/55%) than mandibular (24.4/25%), while laterals were the least affected. In all there were 37.9% molars with moderate/severe defects as compared with 4.9% incisors, the remaining 62.1% and 95.1% respectively being mild. The various associations between the affected teeth were evaluated in the sub-group of 225 MIH children with all 'index' teeth erupted (1,286 affected teeth, 776 molars and 510 incisors), with mean number of affected teeth per child being 5.7; separately for molars 3.4 and for incisors 2.2. In these cases 28.4% of the children had only molars affected and 71.6% had both molars and incisors. In descending order the associations of affected teeth more frequently found were: 4 molars/2 incisors (23.5%), 4 molars/4 incisors (16.8%), 4 molars alone (15.1%) and 2 molars alone (9.7%), the remaining being much less. As age increased the clinical severity of the affected teeth became more prevalent (p=0.0001), and when the total number of affected teeth was assessed the likelihood of having severe defect was also increased (p=0.001). The prevalence of the defect in the present study was 10.2% with maxillary teeth being more frequently affected. Severity increased with age. Mild defects were much more frequent, particularly in incisors. The total number of teeth affected and the most frequently found associations were, 4 molars/2 incisors, 4 molars/4 incisors, 4 molars alone and 2 molars alone.

Do Autotransplanted Teeth Require Elective Root Canal Therapy? A Long-Term Follow-Up Case Series.

PubMed

Murtadha, Linda; Kwok, Jerry

2017-09-01

To determine the long-term survival and outcomes of 252 autotransplanted teeth with a novel root canal therapy (RCT) and follow-up protocol and to establish whether elective RCT after autotransplantation is routinely required for teeth with complete root formation. A retrospective analysis of 209 patients 10 to 58 years old, with a total of 252 autotransplants was carried out with a minimum observational period of 1 year and a maximum period of 29 years. Patients were reviewed at specified intervals. Only the teeth showing any radiographic or clinical signs of internal resorption (IR), external resorption (ER), or pulpal necrosis underwent RCT. A failure was considered the loss or extraction of the autotransplanted tooth. Ten of the 252 autotransplants constituted failures, with 249, 190, 155, 97, 70, and 35 teeth surviving at 1, 2, 3, 5, 7, and 10 years, respectively; the remainder were lost to follow-up. Eighteen percent of teeth (n = 46) showed radiographic signs of IR, ER, and apical pathology (AP). Most cases of ER were observed by 3 years (18 of 28 teeth) and then at 5 to -8 years. Only 3 teeth showed signs of IR, which were observed within 5 years. Most cases of AP were observed within the first year (8 of 15 teeth) and then at 3 to 6 years. Five teeth showed signs of pulp obliteration or sclerosis and did not require RCT, with a maximum period of 16 years after identification of sclerosis. Retrospective analysis of the data showed that 184 autotransplanted teeth had complete root formation and 68 had incomplete root formation at the time of autotransplantation. Of the teeth that were followed for at least 5 years, 59.3% had complete root formation with no signs of pathology and required no RCT. Despite the limitation of this long-term study of patients lost to follow-up, the results suggest that, with close monitoring, some autotransplanted teeth with complete root formation that do not undergo RCT could have the potential for revascularization. Hence, one could reconsider the protocol of routinely providing RCT after autotransplantation. Future long-term studies will be beneficial to assess the vascularity of autotransplanted teeth using Doppler flowmetry with a larger cohort of patients. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. All rights reserved.

Early hominid dental remains from Members 4 and 5 of the Sterkfontein Formation (1966-1996 excavations): catalogue, individual associations, morphological descriptions and initial metrical analysis.

PubMed

Moggi-Cecchi, Jacopo; Grine, Frederick E; Tobias, Phillip V

2006-03-01

The fossils recovered from the Sterkfontein Formation represent, without doubt, the largest collection of early hominid specimens from a single locality. Among the over 600 entries in the catalogue of fossil hominid specimens recovered since 1966, there are 242 dental remains (isolated teeth, jaws with two or more teeth, isolated teeth in association) for a total number of 495 teeth. The aim of this paper is to provide morphological descriptions of all hominid dental specimens recovered between 1968 and 1996 from areas presently known as Members 4 and 5 of the Sterkfontein site. Together with the descriptions, explanatory catalogue information is provided, along with basic measurements and summary statistics. This paper consists of six sections, with descriptive tables: (1) Catalogue of dental remains, arranged numerically. This includes isolated teeth, specimens with teeth still in position within their jaws, and specimens comprised of isolated teeth in association. (2) List of specimens with more complete dentition and the numbers of available teeth per tooth class. (3) List of specimens subdivided in tooth class, with an indication of their preservation, of the wear, if any, and with measurements (mesiodistal and buccolingual diameters) of the individual teeth. (4) List of associations of isolated teeth as individuals i.e. dental remains that can be associated with one another. Some remarks on the relative abundance of maxillary versus mandibular teeth, and on the numbers of available teeth are presented. (5) Morphological descriptions. (6) Summary statistics for the entire Sterkfontein sample (thus including specimens recovered both before and after 1966) and updated descriptive statistics for South African early hominids (A. africanus, A. robustus, South African early Homo). We have compared the coefficients of variation for the MD and BL diameters of the permanent teeth of the Sterkfontein Member 4 hypodigm of A. africanus with the hypodigms of the early hominid taxa. The results show that the Sterkfontein Member 4 sample is not consistently more variable than the other fossil hominid samples analysed; it turned out to be generally less variable than H. habilis sensu lato and A. boisei; it shows overall similar levels of variability to A. afarensis and higher levels than A. robustus. These results, per se, do not provide evidence of the existence of multiple species in the Sterkfontein Member 4 sample.

Dental and Temporomandibular Joint Pathology of the American Black Bear (Ursus americanus).

PubMed

Clark, E J; Chesnutt, S R; Winer, J N; Kass, P H; Verstraete, F J M

Museum specimens (maxillae and/or mandibles) from 371 American black bears (Ursus americanus) acquired between 1889 and 2006 were examined macroscopically according to predefined criteria, and 348 were included in this study. Of the 348 specimens, 126 (36.2%) were from male animals, 106 (30.5%) were from female animals and 116 (33.3%) were from animals of unknown sex. Specimen ages ranged from young adult (n = 63, 18.1%) to adult (n = 285, 81.9%), with juveniles excluded from the study. The number of teeth available for examination was 12,019 (82.2%); 7.0% of teeth were absent artefactually, 0.4% were deemed absent due to acquired tooth loss and 9.7% were absent congenitally. In 43 specimens (12.3%), 82 teeth (0.68%) were small vestigial structures with crowns that were flush with the level of surrounding alveolar bone. The remaining teeth (99.3%) were of normal morphology. Only three supernumerary teeth and three instances of enamel hypoplasia were encountered. Persistent deciduous teeth or teeth with an aberrant number of roots were not encountered in any of the specimens. Approximately one-third of the teeth examined (4,543, 37.8%) displayed attrition/abrasion, affecting nearly all of the specimens (n = 338, 97.1%). Incisor and molar teeth accounted for 52.5% and 34.3% of the affected teeth, respectively, with significantly more adults affected than young adults. Dental fractures were noted in 63 bears, affecting 18.1% of specimens and 1.0% of the total number of present teeth. The canine teeth were most often fractured, with adults having significantly more complicated crown fractures of these teeth than young adults. There were 11 specimens (3.2%) that displayed periapical lesions, affecting 12 (0.1%) dental alveoli. There were 179 specimens (51.4%) displaying bony changes indicative of periodontitis, affecting 816 (6.8%) dental alveoli. The proportion of adult bears affected by periodontitis (57.9%) was significantly greater than that of young adults (22.2%). Exactly half of the specimens (n = 174) possessed lesions consistent with mild temporomandibular joint osteoarthritis. The occurrence and severity of the dental pathology encountered in this study may play an important role in the morbidity and mortality of the American black bear. Copyright © 2016 Elsevier Ltd. All rights reserved.

Association between root resorption incident to orthodontic treatment and treatment factors.

PubMed

Motokawa, Masahide; Sasamoto, Tomoko; Kaku, Masato; Kawata, Toshitsugu; Matsuda, Yayoi; Terao, Akiko; Tanne, Kazuo

2012-06-01

The purpose of this study was to clarify the prevalence and degree of root resorption induced by orthodontic treatment in association with treatment factors. The files of 243 patients (72 males and 171 females) aged 9-51 years were randomly selected from subjects treated with multi-bracket appliances. The severity of root resorption was classified into five categories on radiographs taken before and after treatment. The subjects were divided into extraction (n = 113 patients, 2805 teeth) and non-extraction (n = 130 patients, 3616 teeth) groups and surgical (n = 56 patients, 1503 teeth) and non-surgical treatment (n = 187 patients, 4918 teeth) groups. These subjects were also divided into two or three groups based on the duration of multiloop edgewise archwire (MEAW) treatment, elastic use, and total treatment time: 0 month (T1; n = 184 patients, 4831 teeth), range 1-6 months (T2; n = 37 patients, 994 teeth), more than 6 months (T3; n = 22 patients, 596 teeth); range 0-6 months (n = 114 patients, 3016 teeth) more than 6 months (n = 129 patients, 3405 teeth); range 1-30 months (n = 148 patients, 3913 teeth) and more than 30 months (n = 95 patients, 2508 teeth). The prevalence of overall and severe root resorption evaluated by the number of subjects and teeth was compared with a chi-square test. A Student's t-test for unpaired data was used to determine any statistically significant differences. The prevalence of severe root resorption based on the number of teeth was significantly higher in the group with extractions (P < 0.01). Longer use of a MEAW appliance and elastics also produced a significantly higher prevalence of root resorption (P < 0.05). On the other hand, the prevalence of severe root resorption was not significantly different between the subjects treated with or without surgery, but there was a significant increase when treatment time was prolonged (P < 0.05). A significant difference was found in the amount of root movement of the upper central incisors and the distance from their root apices to the cortical bone surface (P < 0.05). These are regarded as essential factors in the onset of root resorption. These results indicate that orthodontic treatment with extractions, long-term use of a MEAW appliance and elastics, treatment time, and distance of tooth movement are risk factors for severe root resorption.

Brushing Your Child's Teeth

MedlinePlus

... gov/ency/patientinstructions/000769.htm Brushing Your Child's Teeth To use the sharing features on this page, ... age. Taking care of your child's gums and teeth every day helps prevent tooth decay and gum ...

Study of teeth phosphorescence detection technique

NASA Astrophysics Data System (ADS)

Cai, De-Fang; Wang, Shui-ping; Yang, Zhen-jiang; An, Yuying; Huang, Li-Zi; Liang, Yan

1995-05-01

On the basis of research and analysis into optical properties of teeth, this paper introduces the techniques to transform teeth phosphorescence excited by ultraviolet light into electric signals and following steps for data collection, analysis and processing. Also presented are the methods to diagnose pulp-vitality, decayed teeth, and, especially, infant caries and pre-caries diseases. By measurement of a tooth's temperature, other stomatic illnesses can be diagnosed.

On the cutting edge of organ renewal: Identification, regulation, and evolution of incisor stem cells.

PubMed

Kuang-Hsien Hu, Jimmy; Mushegyan, Vagan; Klein, Ophir D

2014-02-01

The rodent incisor is one of a number of organs that grow continuously throughout the life of an animal. Continuous growth of the incisor arose as an evolutionary adaptation to compensate for abrasion at the distal end of the tooth. The sustained turnover of cells that deposit the mineralized dental tissues is made possible by epithelial and mesenchymal stem cells residing at the proximal end of the incisor. A complex network of signaling pathways and transcription factors regulates the formation, maintenance, and differentiation of these stem cells during development and throughout adulthood. Research over the past 15 years has led to significant progress in our understanding of this network, which includes FGF, BMP, Notch, and Hh signaling, as well as cell adhesion molecules and micro-RNAs. This review surveys key historical experiments that laid the foundation of the field and discusses more recent findings that definitively identified the stem cell population, elucidated the regulatory network, and demonstrated possible genetic mechanisms for the evolution of continuously growing teeth. Copyright © 2013 Wiley Periodicals, Inc.

On the cutting edge of organ renewal: identification, regulation and evolution of incisor stem cells

PubMed Central

Hu, Jimmy Kuang-Hsien; Mushegyan, Vagan; Klein, Ophir D.

2014-01-01

The rodent incisor is one of a number of organs that grow continuously throughout the life of an animal. Continuous growth of the incisor arose as an evolutionary adaptation to compensate for abrasion at the distal end of the tooth. The sustained turnover of cells that deposit the mineralized dental tissues is made possible by epithelial and mesenchymal stem cells residing at the proximal end of the incisor. A complex network of signaling pathways and transcription factors regulates the formation, maintenance, and differentiation of these stem cells during development and throughout adulthood. Research over the past 15 years has led to significant progress in our understanding of this network, which includes FGF, BMP, Notch, and Hh signaling, as well as cell adhesion molecules and microRNAs. This review surveys key historical experiments that laid the foundation of the field and discusses more recent findings that definitively identified the stem cell population, elucidated the regulatory network, and demonstrated possible genetic mechanisms for the evolution of continuously growing teeth. PMID:24307456

Pangolin genomes and the evolution of mammalian scales and immunity

PubMed Central

Rayko, Mike; Tan, Tze King; Hari, Ranjeev; Komissarov, Aleksey; Wee, Wei Yee; Yurchenko, Andrey A.; Kliver, Sergey; Tamazian, Gaik; Antunes, Agostinho; Wilson, Richard K.; Warren, Wesley C.; Koepfli, Klaus-Peter; Minx, Patrick; Krasheninnikova, Ksenia; Kotze, Antoinette; Dalton, Desire L.; Vermaak, Elaine; Paterson, Ian C.; Dobrynin, Pavel; Sitam, Frankie Thomas; Rovie-Ryan, Jeffrine J.; Johnson, Warren E.; Yusoff, Aini Mohamed; Luo, Shu-Jin; Karuppannan, Kayal Vizi; Fang, Gang; Zheng, Deyou; Gerstein, Mark B.; Lipovich, Leonard; O'Brien, Stephen J.; Wong, Guat Jah

2016-01-01

Pangolins, unique mammals with scales over most of their body, no teeth, poor vision, and an acute olfactory system, comprise the only placental order (Pholidota) without a whole-genome map. To investigate pangolin biology and evolution, we developed genome assemblies of the Malayan (Manis javanica) and Chinese (M. pentadactyla) pangolins. Strikingly, we found that interferon epsilon (IFNE), exclusively expressed in epithelial cells and important in skin and mucosal immunity, is pseudogenized in all African and Asian pangolin species that we examined, perhaps impacting resistance to infection. We propose that scale development was an innovation that provided protection against injuries or stress and reduced pangolin vulnerability to infection. Further evidence of specialized adaptations was evident from positively selected genes involving immunity-related pathways, inflammation, energy storage and metabolism, muscular and nervous systems, and scale/hair development. Olfactory receptor gene families are significantly expanded in pangolins, reflecting their well-developed olfaction system. This study provides insights into mammalian adaptation and functional diversification, new research tools and questions, and perhaps a new natural IFNE-deficient animal model for studying mammalian immunity. PMID:27510566

Wear resistance of a modified polymethyl methacrylate artificial tooth compared to five commercially available artificial tooth materials.

PubMed

Kamonwanon, Pranithida; Yodmongkol, Sirasa; Chantarachindawong, Rojcharin; Thaweeboon, Sroisiri; Thaweeboon, Boonyanit; Srikhirin, Toemsak

2015-08-01

Wear resistance is a limitation of artificial denture teeth. Improving the wear resistance of conventional artificial denture teeth is of value to prosthodontic patients. The purpose of this in vitro study was to evaluate the wear resistance and hardness of modified polymethyl methacrylate artificial denture teeth compared to 5 commercially available artificial tooth materials. This study evaluated 180 artificial denture teeth (6 groups) that included 3 groups of conventional artificial teeth (MajorDent, Cosmo HXL, and Gnathostar), 2 groups of composite resin artificial teeth (Endura and SR Orthosit PE), and 1 group of modified surface artificial teeth. The flattened buccal surface of each tooth (n=15) was prepared for investigation with the Vickers hardness test and the elucidate wear test (n=15) by using a brushing machine. Each group was loaded for 18,000 cycles, at 2 N, and 150 rpm. The wear value was identified with a profilometer. The data were statistically analyzed by using 1-way ANOVA and post hoc Turkey honestly significant difference tests (α=.001). The tribologies were observed under a scanning electron microscope, and the cytotoxicities were evaluated by MTT assay. The Vickers hardnesses ranged from 28.48 to 39.36. The wear depths and worn surface area values ranged from 1.12 to 10.79 μm and from 6.74 to 161.95 μm(2). The data revealed that the modified artificial denture teeth were significantly harder and exhibited significantly higher wear resistance than did the conventional artificial teeth (P<.001). The scanning electron microscopic images revealed cross sections of the conventional artificial denture teeth with intensively worn surface areas after brushing. The cytotoxicity test revealed 97.85% cell viability, which indicates the nontoxicity of the modified surface of this material. Within the limitations of this study, the polymethyl methacrylate modified surface artificial denture teeth was not significantly different from that of the composite resin artificial denture teeth, with the exceptions that the surface was harder and more wear resistant. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

The relationship between seven health practices and oral health status in community-dwelling elderly Thai.

PubMed

Samnieng, Patcharaphol; Ueno, Masayuki; Zaitsu, Takashi; Shinada, Kayoko; Wright, Fredrick A C; Kawaguchi, Yoko

2013-12-01

This study aims to analyse the relationship between seven health practices, oral health behaviors, and oral health status in community dwelling elderly Thai. The subjects were 612 elderly people (mean age = 68.8 ± 5.9 years). Questionnaires survey about sociodemographics, self-reported seven health practices and oral health behaviors were conducted by trained interviewers. Oral examinations investigated the number of teeth present, decayed teeth, periodontal status and functional tooth units (FTUs). Oral malodor was assessed by Organoleptic Test, and unstimulated saliva was collected for 5 min. Five health practices (smoking, drinking, physical activity, breakfast and weight maintenance) were significantly related with oral health behaviors. ancova analysis demonstrated the following significant associations: (i) smoking behavior with number of teeth present, number of FTUs, decayed teeth, periodontal disease, oral malodor and salivary flow rate, (ii) drinking alcohol behavior with number of teeth present, number of FTUs, periodontal disease, oral malodor and salivary flow rate, (iii) eating breakfast behavior with periodontal disease, oral malodor and salivary flow rate, (iv) eating between-meal snack with number of teeth present, number of FTUs, decayed teeth and periodontal disease, (v) maintaining weight with number of teeth present, number of FTUs, periodontal disease and oral malodor, (vi) sleeping with number of teeth present, number of FTUs, periodontal disease, oral malodor and salivary flow rate, (vii) physical activity with periodontal disease and salivary flow rate. Good health practices were related with good oral health behaviors. Moreover, general health practices were associated with the clinical oral health status such as number of teeth present, decayed teeth, FTUs, periodontal disease, oral malodor and salivary flow rate. The elderly with good general health practices were considered to have good oral health status. Improving general health habits are suggested to lead to better oral health for the elderly, and vice versa. © 2012 John Wiley & Sons A/S and The Gerodontology Society. Published by John Wiley & Sons Ltd.

Improved tooth bleaching combining ozone and hydrogen peroxide--A blinded study.

PubMed

Al-Omiri, Mahmoud K; Abul Hassan, Ra'ed S; AlZarea, Bader K; Lynch, Edward

2016-03-01

To evaluate the efficacy of tooth bleaching using ozone after hydrogen peroxide (H2O2) in comparison to the use of H2O2 alone. 70 extracted teeth were randomly distributed into two groups. Teeth surfaces in group 1 (n=35) were treated using 38% H2O2 and then were exposed to ozone for 60s and this ozonated peroxide mixture was left on the teeth for 20 min. Meanwhile, teeth in group 2 (n=35) were treated with H2O2 38% for 20 min. The L* a* b* and Vita Classic shade values of teeth were evaluated in both groups at base line, after application of H2O2 and ozone in group 1, and after application of H2O2 and then again after another application of ozone in group 2. The statistically significant changes were set at P ≤ 0.05. Baseline L* a* b* and Vita shade values were comparable between groups (P>0.05). Teeth obtained lighter shades following bleaching with both H2O2 and ozone or with H2O2 alone (P ≤ 0.05). Further bleaching with ozone for teeth already bleached with H2O2 alone showed further improvement of the shades of teeth (P<0.001). Teeth treated with H2O2 and ozone had more shade improvements than those only treated with H2O2 (P<0.001). Also, L* values were increased while b* values were decreased (teeth obtained lighter shades) following bleaching in both groups (P ≤ 0.05). More changes were obtained when both ozone and H2O2 were used (P ≤ 0.05). Bleaching with 38% H2O2 and ozone resulted in teeth with lighter shades than bleaching with 38% H2O2 alone. Copyright © 2016 Elsevier Ltd. All rights reserved.

Apical root resorption during orthodontic treatment with aligners? A retrospective radiometric study.

PubMed

Krieger, Elena; Drechsler, Thomas; Schmidtmann, Irene; Jacobs, Collin; Haag, Simeon; Wehrbein, Heinrich

2013-08-14

Objective of this study was to investigate the incidence and severity of apical root resorptions (ARR) during orthodontic treatment with aligners. The sample comprised 100 patients (17-75 years of age) with a class I occlusion and anterior crowding before treatment, treated exclusively with aligners (Invisalign®, Align Technologies, Santa Clara, CA, USA). The following teeth were assessed: upper and lower anterior teeth and first molars. Root and crown lengths of a total of 1600 teeth were measured twice in pre- and post-treatment panoramic radiographs. Afterwards, relative changes of the root length during treatment were calculated by a root-crown-ratio taking pre- and post-treatment root and crown lengths into consideration. A reduction of this ratio was considered as a shortening of the initial root length. Additionally, tooth movements of the front teeth were assessed by lateral cephalograms and the 3-dimensonal set up of each patient. All patients had a reduction of the pre-treatment root length with a minimum of two teeth. On average 7.36 teeth per patient were affected. 54% of 1600 measured teeth showed no measurable root reduction. A reduction of >0%-10% of the pre-treatment root length was found in 27.75%, a distinct reduction of >10%-20% in 11.94%. 6.31% of all teeth were affected with a considerable reduction of >20%. We found no statistically significant correlation between relative root length changes and the individual tooth, gender, age or sagittal and vertical orthodontic tooth movement; except for extrusion of upper front teeth, which was considered as not clinical relevant due to the small amount of mean 4% ARR. The present study is the first analyzing ARR in patients with a fully implemented orthodontic treatment with aligners (i.e. resolving anterior crowding). The variety was high and no clinical relevant influence factor could be detected. A minimum of two teeth with a root length reduction was found in every patient. On average, 7.36 teeth per patient were affected.

Initiation of teeth from the dental lamina in the ferret.

PubMed

Jussila, Maria; Crespo Yanez, Xenia; Thesleff, Irma

2014-01-01

Mammalian tooth development is characterized by formation of primary teeth that belong to different tooth classes and are later replaced by a single set of permanent teeth. The first primary teeth are initiated from the primary dental lamina, and the replacement teeth from the successional dental lamina at the lingual side of the primary teeth. An interdental lamina connects the primary tooth germs together. Most mammalian tooth development research is done on mouse, which does not have teeth in all tooth classes, does not replace its teeth, and does not develop an interdental lamina. We have used the ferret (Mustela putorius furo) as a model animal to elucidate the morphological changes and gene expression during the development of the interdental lamina and the initiation of primary teeth. In addition we have analyzed cell-cell signaling taking place in the interdental lamina as well as in the successional lamina during tooth replacement. By 3D reconstructions of serial histological sections we observed that the morphogenesis of the interdental lamina and the primary teeth are intimately linked. Expression of Pitx2 and Foxi3 in the interdental lamina indicates that it has odontogenic identity, and there is active signaling taking place in the interdental lamina. Bmp4 is coexpressed with the stem cell factor Sox2 at its lingual aspect suggesting that the interdental lamina may retain competence for tooth initiation. We show that when tooth replacement is initiated there is Wnt pathway activity in the budding successional lamina and adjacent mesenchyme but no active Fgf or Eda signaling. Genes associated with human tooth replacement phenotypes, including Runx2 and Il11rα, are mostly expressed in the mesenchyme around the successional lamina in the ferret. Our results highlight the importance of the dental lamina in the mammalian tooth development during the initiation of both primary and replacement teeth. Copyright © 2013 International Society of Differentiation. Published by Elsevier B.V. All rights reserved.

Ameloblasts require active RhoA to generate normal dental enamel.

PubMed

Xue, Hui; Li, Yong; Everett, Eric T; Ryan, Kathleen; Peng, Li; Porecha, Rakhee; Yan, Yan; Lucchese, Anna M; Kuehl, Melissa A; Pugach, Megan K; Bouchard, Jessica; Gibson, Carolyn W

2013-08-01

RhoA plays a fundamental role in regulation of the actin cytoskeleton, intercellular attachment, and cell proliferation. During amelogenesis, ameloblasts (which produce the enamel proteins) undergo dramatic cytoskeletal changes and the RhoA protein level is up-regulated. Transgenic mice were generated that express a dominant-negative RhoA transgene in ameloblasts using amelogenin gene-regulatory sequences. Transgenic and wild-type (WT) molar tooth germs were incubated with sodium fluoride (NaF) or sodium chloride (NaCl) in organ culture. Filamentous actin (F-actin) stained with phalloidin was elevated significantly in WT ameloblasts treated with NaF compared with WT ameloblasts treated with NaCl or with transgenic ameloblasts treated with NaF, thereby confirming a block in the RhoA/Rho-associated protein kinase (ROCK) pathway in the transgenic mice. Little difference in quantitative fluorescence (an estimation of fluorosis) was observed between WT and transgenic incisors from mice provided with drinking water containing NaF. We subsequently found reduced transgene expression in incisors compared with molars. Transgenic molar teeth had reduced amelogenin, E-cadherin, and Ki67 compared with WT molar teeth. Hypoplastic enamel in transgenic mice correlates with reduced expression of the enamel protein, amelogenin, and E-cadherin and cell proliferation are regulated by RhoA in other tissues. Together these findings reveal deficits in molar ameloblast function when RhoA activity is inhibited. © 2013 Eur J Oral Sci.

Chemical agents for the control of plaque and plaque microflora: an overview.

PubMed

Gaffar, A; Afflitto, J; Nabi, N

1997-10-01

This presentation provides an overview of the technologies available for the chemical control of plaque. It is generally accepted that the formation of dental plaque at the interfaces of tooth/gingiva is one of the major causes of gingival inflammation and dental caries. Several therapeutic approaches have been used to control dental plaque and supragingival infections. These include fluoride preparations such as stannous fluoride, oxygenating agents, anti-attachment agents, and cationic and non-cationic antibacterial agents. Among the fluoride preparations, stable stannous fluoride pastes and gels have been shown to reduce supragingival plaque, gingivitis, hypersensitivity and caries. The effect of the oxygenating agents on the supragingival plaque has been equivocal, but recent data indicate that a stable agent which provides sustained active oxygen release is effective in controlling plaque. A polymer, PVPA, which reduced attachment of bacteria to teeth was shown to significantly reduce plaque formation in humans. A new generation of antibacterials includes non-ionics such as triclosan, which in combination with a special polymer delivery system, has been shown to reduce plaque, gingivitis, supragingival calculus and dental caries in long-term studies conducted around the world. Unlike the first generation of agents, the triclosan/copolymer/sodium fluoride system is effective in long-term clinicals and does not cause staining of teeth, increase in calculus, or disturbance in the oral microbial ecology.

Nonocclusal dental microwear analysis of 300,000-year-old Homo heilderbergensis teeth from Sima de los Huesos (Sierra de Atapuerca, Spain).

PubMed

Pérez-Pérez, A; Bermúdez De Castro, J M; Arsuaga, J L

1999-04-01

Casts of nonocclusal enamel surfaces of 190 teeth from the Middle Pleistocene site of Sima de los Huesos have been micrographed by scanning electron microscopy. Microscopic analyses of striation density and length by orientation show distinct patterns of intrapopulation variability. Significant differences in the number and length of the striations by orientation are found between maxillary and mandibular teeth. This probably reflects differences in the mechanical forces involved in the process of chewing food. Significant differences are present between isolated and in situ teeth that could be caused by postdepositional processes differentially affecting the isolated teeth. In addition, a distinct and very unusual striation pattern is observed in a sample of teeth that can be explained only by a strong nondietary, most probably postmortem abrasion of the enamel surfaces. These teeth have a very high density of scratches, shorter in length than those found on other teeth, that are not indicative of dietary habits. No known depositional process may account for the presence of such postmortem wear since heavy transportation of materials within the clayish sediments has been discarded for the site. Despite this, a characteristic dietary striation pattern can be observed in most of the teeth analyzed. Most likely the diet of the Homo heidelbergensis hominids from Sima de los Huesos was highly abrasive, probably with a large dependence on hard, poorly processed plant foods, such as roots, stems, and seeds. A highly significant sex-related difference in the striation pattern can also be observed in the teeth analyzed, suggesting a differential consistency in the foods eaten by females and males.

[Significance of proper oral hygiene for health condition of mouth and teeth].

PubMed

Ljaljević, Agima; Matijević, Snezana; Terzić, Natasa; Andjelić, Jasmina; Mugosa, Boban

2012-01-01

Proper mouth and teeth hygiene has influence on the prevention of a great number of diseases and very often some of them are not related only to oral cavity. Most frequent diseases of mouth and teeth such as caries and periodontal diseases are caused, among other factors, by poor oral hygiene. They are also more frequent in young population. The aim of this study was to estimate the influence of sociodemographic characteristics and hygienic habit on oral health in children aged 11-15 years. This cross-sectional study was conducted by the dental teams in dentist surgeries in Tivat Health Center between May and September 2009. The sample consisted of patients 11 to 15 years of age. A questionnaire and dental examination of mouth and teeth were used as research instruments. The examinations were conducted in accordance with the World Health Organization methodology and criteria. The data obtained from the interviews were correlated with those obtained from the clinical examinations. The results show that the majority of respondents brush their teeth twice a day and visit the dentist once in every six months. The research also shows that 57% respondents have caries of deciduous teeth and over 63% respondents of permanent teeth. Gingivitis was found in 14% and orthodontic anomalies in 44.7% respondents. A half of respondents who brush their teeth rarely have problems with gingivitis. There is a highly statistically significant difference between the occurrence of gingivitis and the frequency of teeth brushing. There is a significant difference between mouth and oral hygiene and sex as well as other sociodemographic characteristics of respondents. The study showed the correlation between occurrence of caries and the gingivitis and frequency of teeth brushing and dental visits.

Dental caries in Arab League countries: a systematic review and meta-analysis.

PubMed

Khan, Soban Qadir

2014-08-01

The aim of this review was to determine prevalence of dental caries in primary and permanent teeth in the 2-20-year-old population of the Arab league. A literature search was performed on Pubmed, Summon and Google Scholar using the key words 'Dental caries', 'dmft' and 'DMFT'. A total of 293 articles were found, of which 35 passed our inclusion criteria and were included in analysis. Tables were made separately for primary and permanent teeth; the age group for primary teeth was 2-12 years and for permanent teeth 6-20 years. A meta-analysis was run by using data extracted from the studies included. Heterogeneity was tested by forest plot and chi-square test, and considerable heterogeneity was found. Mean decayed, missing and filled teeth (dmft) was 4.341 (95% CI 3.714, 4.969) and in permanent teeth (DMFT) was 2.469 (95% CI 2.019, 2.919) from a random effect model. Publication bias diagnostics suggested missing of four studies of primary teeth caries data and eight studies of permanent teeth caries data to obtain symmetry in the funnel plot. The incidence of caries in primary teeth was found to be high compared with caries in permanent teeth in the Arab League. This study does not provide a comprehensive picture of caries prevalence in the Arab League because in many of these countries only a few studies were performed. Therefore, these data cannot provide a complete picture of the prevalence of caries in those countries. Additional studies are needed to better evaluate the prevalence of caries in children and young adults in Arab League countries. © 2014 FDI World Dental Federation.

[Number of teeth and hormonal profile of postmenopausal women with osteoporosis, osteopenia and normal bone mineral density--a preliminary study].

PubMed

Stagraczyński, Maciej; Kulczyk, Tomasz; Leszczyński, Piotr; Męczekalski, Błażej

2015-10-01

Profound hypoestrogenism causes increased risk of osteoporosis and bone fracture in menopause. This period of women life is also characterized by decrease number of teeth and deterioration of oral cavity health. The aim of the study was to assess the number of teeth, hormonal profile (Follicle-stimualting hormone (FSH), estradiol (E2), testosterone (T) and dehydroepiandrosterone sulphate (DHEA-S) and the bone mineral density (BMD) of the lumbar part of the spine in postmenopausal women with osteoporosis, osteopenia and normal BMD. The next step of the study was to determine whether there was a correlation between vertebral mineral bone density, the hormonal profile and the number of teeth. A total number of 47 women was involved in the study. Based on the results of densitometry tests (DEXA) of vertebral column the subjects were divided into 3 groups: 10 with osteoporosis, 20 with osteopenia and 17 with normal BMD. All the subjects had undergone a hormonal assessment which included blood serum estimation for FSH, E2, DHEA-S and T levels. Also the total number of teeth present was recorded. Serum estradiol and testosterone levels in postmenopausal women were found to be positively correlated with the number of teeth present. A negative correlation was found between age and the number of maxillary teeth in postmenopausal women with osteopenia. There was no influence of serum FSH, estradiol, testosterone and DHEA-S levels on vertebral BMD loss in postmenopausal women. There was no correlation between teeth number and BMD of vertebral column. Serum levels of estradiol and testosterone in postmenopausal women positively correlate with teeth numbers. Age is the main risk factor for teeth loss in postmenopausal women. © 2015 MEDPRESS.

Comparative evaluation of Nano-Hydroxyapatite preparation and Calcium Sucrose Phosphate on microhardness of deciduous teeth after iron drop exposure - An in-vitro study.

PubMed

Rathi, Nilesh; Baid, Rutika; Baliga, Sudhindra; Thosar, Nilima

2017-04-01

To evaluate and compare the microhardness of deciduous teeth treated with nano-hydroxyapatite and calcium sucrose phosphate after iron drop exposure. Twenty healthy anterior deciduous teeth were collected and stored in 0.9% saline solution at room temperature. All the teeth were immersed in artificial saliva in an incubator shaker at 37° for an hour and then subjected to Vickers microhardness test at 100g load for 5 seconds. The teeth were then immersed in iron drop for 5 minutes, twice daily, rinsed with distilled water and kept in artificial saliva. This procedure was repeated for 7 days and teeth were subjected to microhardness testing. Further, the teeth were divided in two groups, each group containing 10 teeth. In group I, nanohydroxyapatite preparation and in group II, calcium sucrose phosphate were applied for 10 minutes, twice daily for 7 days and subjected again to microhardness testing again. Vickers microhardness analysis revealed that iron drop exposure to teeth caused significant decrease in microhardness ( p <0.05). Application of nanohydroxyapatite preparation in Group I showed significantly increased enamel microhardness (206.90) than that after iron drop exposure. Similarly, application of calcium sucrose phosphate in Group II showed significantly increased enamel microhardness (200.89) than that after iron drop exposure. Statistical difference was seen between the two groups, with nanohydroxyapatite preparation showing increased microhardness than calcium sucrose phosphate. Nanohydroxyapatite preparation and calcium sucrose phosphate have remineralizing effect over teeth affected by acid challenge of iron drops, nanohydroxyapatite preparation showing better results than calcium sucrose phosphate. Key words: Iron drops, Nanohydroxyapaptite, calcium sucrose phosphate, anticay.

Influence of Apical Diameter on the Outcome of Regenerative Endodontic Treatment in Teeth with Pulp Necrosis: A Review.

PubMed

Fang, Yanjun; Wang, Xinhuan; Zhu, Jingjing; Su, Chaonan; Yang, Ying; Meng, Liuyan

2018-03-01

The aim of this review was to evaluate whether the apical diameter of teeth with necrotic pulp affects the outcomes of regenerative endodontic treatment and to determine the minimal apical size needed to obtain proper pulp revascularization. A literature search was performed from January 1, 2001, to November 25, 2016. Studies that satisfied the inclusion criteria were subjected to data extraction and analysis. In total, 14 studies with 85 patients were included. There were 10 case reports, 3 case series, and 1 prospective cohort study. The apical diameters of the teeth were divided into 3 groups: a narrow-sized group (group N), <0.5 mm (n = 10); a medium-sized group (group M), 0.5-1.0 mm (n = 25); and a wide-sized group (group W), >1.0 mm (n = 60). In group N, 1 tooth failed, 2 teeth completely healed, and 7 teeth incompletely healed. In group M, 2 teeth were excluded, and 1 tooth failed. In group W, 3 teeth were excluded, and 4 teeth failed. The clinical success rates were 90%, 95.65%, and 92.98% in groups N, M, and W, respectively. Within the limitations, the teeth with apical diameters <1.0 mm achieved clinical success after regenerative endodontic treatment. Meanwhile, the teeth with apical diameters of 0.5-1.0 mm attained the highest clinical success rate, which may be related to other potential factors, including patient age, pulp necrosis etiology, preoperative apical radiolucency, procedure details, follow-up period, and sample size. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Management of Teeth with Persistent Apical Periodontitis after Root Canal Treatment Using Regenerative Endodontic Therapy.

PubMed

Saoud, Tarek Mohamed A; Huang, George T-J; Gibbs, Jennifer L; Sigurdsson, Asgeir; Lin, Louis M

2015-10-01

Regenerative endodontic therapy (RET) is currently used to treat immature teeth with necrotic pulp and/or apical periodontitis. However, recently RET has been used to treat mature teeth with necrotic pulp and/or apical periodontitis and resulted in regression of clinical signs and/or symptoms and resolution of apical periodontitis. The purpose of this case report was to describe the potential of using RET to treat 2 mature teeth with persistent apical periodontitis after root canal therapy using RET. Two male patients, one 26-year old and another 12-year old, presented for retreatment of persistent apical periodontitis after root canal treatment of 2 mature teeth (#9 and #19). The gutta-percha fillings in the canals of teeth #9 and #19 were removed with Carvene gutta-percha solvent (Prevest DenPro, Jammu, India) and ProTaper Universal rotary retreatment files (Dentsply Maillefer, Ballaigues, Switzerland). The canals of both teeth were further chemomechanically debrided with rotary retreatment files and copious amounts of sodium hypochlorite irrigation and dressed with Metapaste (Meta Biomed, Chungbuk, Korea). RET was performed on teeth #9 and #19. Periapical bleeding was provoked into the disinfected root canals. The blood clots were covered with mineral trioxide aggregate plugs, and the access cavities were restored with intermediate restorative material. Teeth #9 and #19 showed regression of clinical signs and/or symptoms and healing of apical periodontitis after 13-month and 14-month follow-ups, respectively. Tooth #9 revealed narrowing of the canal space and apical closure by deposition of hard tissue. RET has the potential to be used to retreat teeth with persistent apical periodontitis after root canal therapy. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The number of missing teeth in people of the Edo period in Japan in the 17th to 19th centuries.

PubMed

Fujita, Hisashi

2012-06-01

The aims of this study were to examine the number of missing teeth in the people of the Edo period (or number of remaining teeth) and to contribute to the 8020 movement proposed in Japan to help people retain 20 or more of their own teeth until the age of 80. The study of dentition in ancient skeletal remains of our ancestors from multiple perspectives can yield information that can contribute to the study of physical anthropology and the leading edge of modern dental research. The materials were 82 excavated individuals (52 males and 30 females) from 1603 to 1868 whose maxillas and mandibles were both examinable. The age and sex were estimated by anthropological methods, and the individuals were divided into five groups. The status of missing teeth was compared between groups, and a chi-square test was used to test significant differences between groups. The rates of tooth loss were examined in the maxillas and mandibles. In the people of the Edo period, many teeth remained in good condition until early to late middle age. There were more remaining teeth in these individuals than in modern-day individuals. However, the Edo people clearly showed increased tooth loss with age. There were no differences in tooth loss by sex. The tooth type with a high rate of tooth loss was posterior teeth, but incisor loss also occurred with ageing. Mandibular canines were most likely to be remaining. The Edo people had more remaining teeth than modern-day society. This finding was unexpected. The notion that "people of long past ages lost more teeth more quickly" does not seem to apply to people in the Edo period in Japan. © 2011 The Gerodontology Society and John Wiley & Sons A/S.

Posterior teeth occlusion and dysphagia risk in older nursing home residents: a cross-sectional observational study.

PubMed

Okabe, Y; Takeuchi, K; Izumi, M; Furuta, M; Takeshita, T; Shibata, Y; Kageyama, S; Ganaha, S; Yamashita, Y

2017-02-01

The total number of natural teeth was related to swallowing function among older adults; however, limited information is available regarding the impact of occluding pairs of teeth on swallowing function. This study aimed to examine the association between posterior teeth occlusion and dysphagia risk in older nursing home residents. This cross-sectional study included 238 residents aged ≥60 years from eight nursing homes in Aso City, Japan. Swallowing function was evaluated using the modified water swallowing test (MWST); the primary outcome was dysphagia risk (MWST score ≤3). Posterior teeth occlusion was assessed using number of functional tooth units (FTUs), determined based on number and location of the remaining natural and artificial teeth on implant-supported, fixed or removable prostheses. Univariate and multivariate logistic regression analyses were performed to examine the association between posterior teeth occlusion and dysphagia risk, adjusted for the covariates of number of natural teeth, demographic characteristics, comorbidities, physical function, body mass index and cognitive function. Of the 238 subjects, 44 (18·5%) were determined to be at risk of dysphagia based on the MWST scores. The odds ratio (OR) of dysphagia risk decreased in subjects with higher total FTUs [OR = 0·92, 95% confidence interval (CI) 0·87-0·98]. After adjusting for covariates, this association remained significant (OR = 0·90, 95% CI 0·84-0·97). Loss of posterior teeth occlusion was independently associated with dysphagia risk in older nursing home residents. Maintaining and restoring posterior teeth occlusion may be an effective measure to prevent dysphagia. © 2016 John Wiley & Sons Ltd.

Repair of experimental plaque-induced periodontal disease in dogs.

PubMed

Shoukry, M; Ben Ali, L; Abdel Naby, M; Soliman, A

2007-09-01

Forty mongrel dogs were used in this study for induction of periodontal disease by placing subgingival silk ligatures affecting maxillary and mandibular premolar teeth during a 12-month period. Experimental premolar teeth received monthly clinical, radiographic, and histometric/pathologic assessments. The results demonstrated significant increases in scores and values of periodontal disease parameters associated with variable degrees of alveolar bone loss. The experimental maxillary premolar teeth exhibited more severe and rapid rates of periodontal disease compared with mandibular premolar teeth. Histometric analysis showed significant reduction in free and attached gingiva of the experimental teeth. Histopathological examination of buccolingual sections from experimental premolar teeth showed the presence of rete pegs within the sulcular epithelium with acanthosis and erosive changes, widening of the periodontal ligament, and alveolar bone resorption. Various methods for periodontal repair were studied in 194 experimental premolar teeth exhibiting different degrees of periodontal disease. The treatment plan comprised non-surgical (teeth scaling, root planing, and oral hygiene) and surgical methods (closed gingival curettage, modified Widman flap, and reconstructive surgery using autogenous bone marrow graft and canine amniotic membrane). The initial non-surgical treatment resulted in a periodontal recovery rate of 37.6% and was found effective for treatment of early periodontal disease based on resolution of gingivitis and reduction of periodontal probing depths. Surgical treatment by closed gingival curettage to eliminate the diseased pocket lining resulted in a recovery rate of 48.8% and proved effective in substantially reducing deep periodontal pockets. Open root planing following flap elevation resulted in a recovery rate of 85.4% and was effective for deep and refractory periodontal pockets. Autogenous bone graft implantation combined with canine amniotic membrane as a biodegradable membrane was used in 18 premolar teeth and failed to improve advanced furcation defects in most teeth.

Evaluation of teeth loss among workers in the laminate and composite materials department of aircraft factory.

PubMed

Bachanek, Teresa; Samborski, Dariusz; Chałas, Renata; Wolańska, Ewa

2005-01-01

Liquid epoxide resins, solvents and solvent-modified epoxide resins, as well as hardeners for epoxide resins, appear to be skin and mucosa irritants of different intensity and possibly have allergenic properties. Therefore, it is required that the employees are qualified and industrial safety rules are followed when these substances are in use in the manufacturing process. Our study evaluated the state of dentition and analysed the loss of teeth in the workers of the laminate and composite materials department of aircraft factory. The research has been carried out in a group of 114 workers, which consisted of 88 men and 26 women 20 to 61 years old. The control group consisted of 41 workers of the administration department in the aircraft factory who did not have any contact with chemical compounds. The workers in the studied group are characterised as having an unsatisfactory state of dentition, as shown by the high rate of lost teeth (74 %). Statistically significant difference between the studied group and the control was found when the relationship between the number of lost molar teeth in women in the studied group and those in the control group is taken into consideration, a statistically significant difference appears to refer to teeth 46 and 27. The same statistically important correlation between men in the control and studied groups concerns teeth 16. The research data shows that incisor teeth are the least frequently extracted teeth in the whole population studied. Statistically significant differences can be noted for teeth 21 and 23 between the women in the control group and those in the studied one. Future studies are necessary to assess the potential relationship between the loss of teeth among workers of the department of laminate and composite materials of aircraft factory and their workplace.

The creation of virtual teeth with and without tooth pathology for a virtual learning environment in dental education.

PubMed

de Boer, I R; Wesselink, P R; Vervoorn, J M

2013-11-01

To describe the development and opportunities for implementation of virtual teeth with and without pathology for use in a virtual learning environment in dental education. The creation of virtual teeth begins by scanning a tooth with a cone beam CT. The resulting scan consists of multiple two-dimensional grey-scale images. The specially designed software program ColorMapEditor connects these two-dimensional images to create a three-dimensional tooth. With this software, any aspect of the tooth can be modified, including its colour, volume, shape and density, resulting in the creation of virtual teeth of any type. This article provides examples of realistic virtual teeth with and without pathology that can be used for dental education. ColorMapEditor offers infinite possibilities to adjust and add options for the optimisation of virtual teeth. Virtual teeth have unlimited availability for dental students, allowing them to practise as often as required. Virtual teeth can be made and adjusted to any shape with any type of pathology. Further developments in software and hardware technology are necessary to refine the ability to colour and shape the interior of the pulp chamber and surface of the tooth to enable not only treatment but also diagnostics and thus create a greater degree of realism. The creation and use of virtual teeth in dental education appears to be feasible but is still in development; it offers many opportunities for the creation of teeth with various pathologies, although an evaluation of its use in dental education is still required. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effect of bulk-fill base material on fracture strength of root-filled teeth restored with laminate resin composite restorations.

PubMed

Taha, N A; Maghaireh, G A; Ghannam, A S; Palamara, J E

2017-08-01

To evaluate the effect of using a bulk-fill flowable base material on fracture strength and fracture patterns of root-filled maxillary premolars with MOD preparations restored with laminate restorations. Fifty extracted maxillary premolars were selected for the study. Standardized MOD cavities with endodontic treatment were prepared for all teeth, except for intact control. The teeth were divided randomly into five groups (n=10); (Group 1) sound teeth, (Group 2) unrestored teeth; (Group 3) MOD cavities with Vitrebond base and resin-based composite (Ceram. X One Universal); (Group 4) MOD cavities with 2mm GIC base (Fuji IX GP) and resin-based composite (Ceram. X One Universal) open laminate, (Group 5) MOD cavities were restored with 4mm of bulk-fill flowable base material (SDR) and resin-based composite (Ceram. X One Universal). All teeth were thermocycled and subjected to a 45° ramped oblique load in a universal testing machine. Fracture load and fracture patterns were recorded. Data were analyzed using one-way ANOVA and Dunnett's T3 test. Restoration in general increased the fracture strength compared to unrestored teeth. The fracture strength of group 5 (bulk-fill) was significantly higher than the fracture strength of the GIC laminate groups and not significantly different from the intact teeth (355±112N, P=0.118). The type of failure was unfavorable for most of the groups, with the majority being mixed failures. The use of a bulk-fill flowable base material significantly increased the fracture strength of extracted root-filled teeth with MOD cavities; however it did not improve fracture patterns to more favorable ones. Investigating restorative techniques that may improve the longevity of root-filled premolar teeth restored with direct resin restorations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fracture Strength of Endodontically Treated Teeth with Different Access Cavity Designs.

PubMed

Plotino, Gianluca; Grande, Nicola Maria; Isufi, Almira; Ioppolo, Pietro; Pedullà, Eugenio; Bedini, Rossella; Gambarini, Gianluca; Testarelli, Luca

2017-06-01

The purpose of this study was to compare in vitro the fracture strength of root-filled and restored teeth with traditional endodontic cavity (TEC), conservative endodontic cavity (CEC), or ultraconservative "ninja" endodontic cavity (NEC) access. Extracted human intact maxillary and mandibular premolars and molars were selected and assigned to control (intact teeth), TEC, CEC, or NEC groups (n = 10/group/type). Teeth in the TEC group were prepared following the principles of traditional endodontic cavities. Minimal CECs and NECs were plotted on cone-beam computed tomographic images. Then, teeth were endodontically treated and restored. The 160 specimens were then loaded to fracture in a mechanical material testing machine (LR30 K; Lloyd Instruments Ltd, Fareham, UK). The maximum load at fracture and fracture pattern (restorable or unrestorable) were recorded. Fracture loads were compared statistically, and the data were examined with analysis of variance and the Student-Newman-Keuls test for multiple comparisons. The mean load at fracture for TEC was significantly lower than the one for the CEC, NEC, and control groups for all types of teeth (P < .05), whereas no difference was observed among CEC, NEC, and intact teeth (P > .05). Unrestorable fractures were significantly more frequent in the TEC, CEC, and NEC groups than in the control group in each tooth type (P < .05). Teeth with TEC access showed lower fracture strength than the ones prepared with CEC or NEC. Ultraconservative "ninja" endodontic cavity access did not increase the fracture strength of teeth compared with the ones prepared with CEC. Intact teeth showed more restorable fractures than all the prepared ones. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Malocclusion of teeth (image)

MedlinePlus

Occlusion refers to the alignment of teeth and the way that the upper and lower teeth fit together (bite). Malocclusion is the most common reason for referral to an orthodontist. Most malocclusion is mild enough not to ...

Impacted tooth

MedlinePlus

... a tooth that does not break through the gum. ... Teeth start to pass through the gums (emerge) during infancy. This happens again when permanent teeth replace the primary (baby) teeth. If a tooth does not come in, or ...

Embryonic development of Python sebae - II: Craniofacial microscopic anatomy, cell proliferation and apoptosis.

PubMed

Buchtová, Marcela; Boughner, Julia C; Fu, Katherine; Diewert, Virginia M; Richman, Joy M

2007-01-01

This study explores the microscopic craniofacial morphogenesis of the oviparous African rock python (Python sebae) spanning the first two-thirds of the post-oviposition period. At the time of laying, the python embryo consists of largely undifferentiated mesenchyme and epithelium with the exception of the cranial base and trabeculae cranii, which are undergoing chondrogenesis. The facial prominences are well defined and are at a late stage, close to the time when lip fusion begins. Later (11-12d), specializations in the epithelia begin to differentiate (vomeronasal and olfactory epithelia, teeth). Dental development in snakes is different from that of mammals in several aspects including an extended dental lamina with the capacity to form 4 sets of generational teeth. In addition, the ophidian olfactory system is very different from the mammalian. There is a large vomeronasal organ, a nasal cavity proper and an extraconchal space. All of these areas are lined with a greatly expanded olfactory epithelium. Intramembranous bone differentiation is taking place at stage 3 with some bones already ossifying whereas most are only represented as mesenchymal condensations. In addition to routine histological staining, PCNA immunohistochemistry reveals relatively higher levels of proliferation in the extending dental laminae, in osseous mesenchymal condensations and in the olfactory epithelia. Areas undergoing apoptosis were noted in the enamel organs of the teeth and osseous mesenchymal condensations. We propose that localized apoptosis helps to divide a single condensation into multiple ossification centres and this is a mechanism whereby novel morphology can be selected in response to evolutionary pressures. Several additional differences in head morphology between snakes and other amniotes were noted including a palatal groove separating the inner and outer row of teeth in the upper jaw, a tracheal opening within the tongue and a pharyngeal adhesion that closes off the pharynx from the oral cavity between stages 1 and 4. Our studies on these and other differences in the python will provide valuable insights into in developmental, molecular and evolutionary mechanisms of patterning.

Dental ablation with 1064 nm, 500 ps, Diode pumped solid state laser: A preliminary study.

PubMed

Sozzi, Michele; Fornaini, Carlo; Cucinotta, Annamaria; Merigo, Elisabetta; Vescovi, Paolo; Selleri, Stefano

2013-01-01

The Er:YAG laser in conservative dentistry is. good alternative to conventional instruments. Though several studies show the advantages of these devices, some drawbacks and unsolved problems are still present, such as the cost of the device and the large dimensions of the equipment. In the present study, the effectiveness of dental surface ablation with a picosecond infrared diode-pumped solid-state (DPSS) laser was investigated. In vitro tests on extracted human teeth were carried out, with assessment of the ablation quality in the tooth and thermal increase inside the pulp chamber. A solid-state picosecond laser was used for the experiments. The samples were exposed to laser energy at 1064 nm at a frequency of 30 kHz and a 500 ps pulse width. The target teeth were cooled during exposures. The internal temperature of the pulp chamber was monitored with. thermocouple. Optical microscope images showed effective ablation with the absence of carbonisation and micro-cracks. The cooling maintained the temperature rise in the pulp chamber below the permitted 5.5°C. The main problem with the use of lasers in dentistry when teeth are the target is the heat generated in the pulp chamber of the target teeth. With lasers operating in the femtosecond mode, a better management of the internal temperature is possible, but is offset by the high cost of such devices. With the ps domain system used in the present study together with cooling using chilled water, effective and clean ablation could be achieved with a controlled thermal effect in the pulp chamber. In this preliminary study with a picosecond domain DPSS laser using water cooling for the target, effective hard tissue ablation was achieved keeping the thermal increase in the pulp within the permitted range. The results suggest that this system could be used in clinical practice with appropriate modifications.

Evaluation of temperature change during antimicrobial photodynamic therapy with two different photosensitizers in dental caries.

PubMed

Mirzaie, Mansoreh; Yassini, Esmael; Ashnagar, Sajjad; Hadadi, Azadeh; Chiniforush, Nasim

2016-06-01

Many attempts have been made in elimination of bacteria in infected and demineralized dentin to not only provide efficient bactericidal potential, but to have minimal damage for tooth structure. The aim of this study was to assess the temperature change during aPDT with ICG and TBO compared with conventional Diode laser irradiation. 48 premolar teeth which were selected for this study. A class I cavity was drilled in each teeth, with dimensions of 2mm width, 4mm length and depth of 2.5-3.5mm, providing a dentinal wall of approximately 0.5mm for pulp chamber. Then teeth were randomly allocated in 4 experimental groups (n=12); Group 1: TBO+LED, Group 2: ICG+Diode Laser, Group 3: Diode laser with output power of 0.5W, Group 4: Diode laser with output power of 1W. Thermocouple device was held by experimenter hand and the sensor was in pulp chamber of the teeth. Heat generated during irradiation was reported on LCD screen by NUX Plus software. Repeated measure ANOVA was used in order to compare the temperature before and after laser application. Tukey HSD was used to compare the results between groups. Temperature was risen for about 0.54±0.05°C for group 1, 1.67±0.14°C for group 2, 4.21±0.83°C for group 3, and 4. 50±0.32°C for group 4. The difference between group 1 & 2, 1 & 3 and 1 & 4 was significant (p<0.0001). According to results of this study, Diode (with or without photosensitizer- 0.5 and 1W) can be safely used as alternative approach for disinfection after caries removal in thermal point of view. Copyright © 2016. Published by Elsevier B.V.

Effect of topical alendronate on root resorption of dried replanted dog teeth.

PubMed

Levin, L; Bryson, E C; Caplan, D; Trope, M

2001-06-01

Alendronate (ALN) is a third generation bisphosphonate with demonstrated osteoclast inhibitory activity that may slow down the resorptive process after severe traumatic injuries. Eighty-two premolar roots of five mongrel dogs were endodontically treated and restored, extracted and treated as follows: 70 roots were bench dried for either 40 or 60 min. Thirty-eight of these roots were then soaked for 5 min in a 1 mM solution of ALN in Hanks' Balanced Salt Solution (HBSS) and replanted. Thirty-two roots were soaked for 5 min in HBSS and replanted. In the remaining 12 roots which were not exposed to the bench drying procedure, a 0.5 mM deep lingual mid-root cemental defect was made. Six of these roots were soaked in a 1 mM solution of ALN in HBSS for 5 min and replanted. The other six roots were soaked for 5 min in HBSS and replanted. Historical negative and positive controls were used from similarly treated teeth in our previous studies. After 4 months the dogs were killed and the roots prepared for histological evaluation. Five-microm-thick cross-sections of the root and surrounding tissue taken every 70 microm were evaluated for healing according to the criteria of Andreasen. In the 12 roots with cemental defects, healing with cementum of the damaged root surface was evaluated. In addition, residual root mass was also measured to determine the extent of root structure loss for each soaking method. Cemental healing took place in all 12 artificially damaged roots, indicating that these soaking media did not inhibit cementogenesis. The alendronate-soaked roots had statistically significantly more healing than the roots soaked in HBSS without alendronate. This improvement in healing was seen in all dogs except one and in all teeth except the first premolar. Soaking in alendronate also resulted in significantly less loss in root mass due to resorption compared to those teeth soaked in HBSS without alendronate.

Self-locking telescoping manipulator arm

NASA Technical Reports Server (NTRS)

Nesmith, M. F. (Inventor)

1985-01-01

A telescoping manipulator arm and pivotable finger assembly are disclosed. The telescoping arm assembly includes a generally T-shaped arm having three outwardly extending fingers guided on grooved roller guides to compensate for environmental variations. The pivotable finger assembly includes four pivoting fingers. Arcuate teeth are formed on the ends of the fingers. A rack having teeth on four sides meshes with each one of the fingers. One surface of the rack includes teeth along its entire surface which mesh with teeth of one of the fingers. The teeth at the remote end of the rack engage teeth of a gear wheel. The wheel includes a worm which meshes with a worn drive shaft of the drive motor providing a ninety degree self-locking drive for locking the fingers in a desired position. A similar drive provides a self-locking drive for positioning the telescoping arm.

Polycarbonate crowns for primary teeth revisited: restorative options, technique and case reports.

PubMed

Venkataraghavan, Karthik; Chan, John; Karthik, Sandhya

2014-01-01

Esthetics by definition is the science of beauty - that particular detail of an animate or inanimate object that makes it appealing to the eye. In the modern, civilized, and cosmetically conscious world, well-contoured and well-aligned white teeth set the standard for beauty. Such teeth are not only considered attractive but are also indicative of nutritional health, self esteem, hygienic pride, and economic status. Numerous treatment approaches have been proposed to address the esthetics and retention of restorations in primary teeth. Even though researchers have claimed that certain restorations are better than the others, particularly owing to the issues mentioned above, the search for the ideal esthetic restoration for the primary teeth continues. This paper revisits and attempts to reintroduce the full coverage restoration, namely, polycarbonate crown, for use in primary anterior teeth.

Effect of potentially chromogenic beverages on shear bond strength of acrylic denture teeth to heat-polymerized denture base resins

PubMed Central

Neppelenbroek, Karin Hermana; Urban, Vanessa Migliorini; de Oliveira, Denise Gusmão; Porto, Vinícius Carvalho; Almilhatti, Hercules Jorge; Campanha, Nara Hellen

2016-01-01

Background: Detachment of denture acrylic resin artificial teeth from denture base resin is one of the most common problems presented by denture wearers. Purpose: This study investigated the shear bond strength (SBS) and fracture type of bonding interface of two commercial acrylic teeth (Vipi Dent Plus e Biolux) to two denture base resins (Vipi Cril e Lucitone 550) after immersion in potentially chromogenic beverages (coffee, cola soft drink, and red wine) or control solution (distilled water). Materials and Methods: Maxillary central incisor acrylic teeth were placed at 45° to denture base resin and submitted to short polymerization cycle according to manufacturers. Specimens were divided according to the combination tooth/resin/solution (n = 8) and submitted to bond strength tests in a universal testing machine MTS-810 (0.5 mm/min). Subsequently, fracture area was analyzed by stereomicroscope at a magnification of ×10 and categorized into adhesive, cohesive, or mixed failure. Results: The bond strength of teeth/denture base resins interface was not significantly affected by tested solutions (P > 0.087), except for Biolux teeth immersed in coffee (P < 0.01). In all conditions, the Vipi Dent Plus teeth showed higher bond strength to Lucitone and Vipi Cril resins when compared to Biolux teeth (P < 0.003). All specimens’ failure modes were cohesive. Conclusions: The SBS of acrylic teeth to denture base resins was not generally influenced by immersion in the tested staining beverages. PMID:27621547

Microstructure and mineral composition of dental enamel of permanent and deciduous teeth.

PubMed

De Menezes Oliveira, Maria Angélica Hueb; Torres, Carolina Paes; Gomes-Silva, Jaciara Miranda; Chinelatti, Michelle Alexandra; De Menezes, Fernando Carlos Hueb; Palma-Dibb, Regina Guenka; Borsatto, Maria Cristina

2010-05-01

This study evaluated and compared in vitro the microstructure and mineral composition of permanent and deciduous teeth's dental enamel. Sound third molars (n = 12) and second primary molars (n = 12) were selected and randomly assigned to the following groups, according to the analysis method performed (n = 4): Scanning electron microscopy (SEM), X-Ray diffraction (XRD) and Energy dispersive X-ray spectrometer (EDS). Qualitative and quantitative comparisons of the dental enamel were done. The microscopic findings were analyzed statistically by a nonparametric test (Kruskal-Wallis). The measurements of the prisms number and thickness were done in SEM photomicrographs. The relative amounts of calcium (Ca) and phosphorus (P) were determined by EDS investigation. Chemical phases present in both types of teeth were observed by the XRD analysis. The mean thickness measurements observed in the deciduous teeth enamel was 1.14 mm and in the permanent teeth enamel was 2.58 mm. The mean rod head diameter in deciduous teeth was statistically similar to that of permanent teeth enamel, and a slightly decrease from the outer enamel surface to the region next to the enamel-dentine junction was assessed. The numerical density of enamel rods was higher in the deciduous teeth, mainly near EDJ, that showed statistically significant difference. The percentage of Ca and P was higher in the permanent teeth enamel. The primary enamel structure showed a lower level of Ca and P, thinner thickness and higher numerical density of rods. (c) 2009 Wiley-Liss, Inc.

Bond Strength and Interfacial Morphology of Different Dentin Adhesives in Primary Teeth

PubMed Central

Vashisth, Pallavi; Mittal, Mudit; Goswami, Mousumi; Chaudhary, Seema; Dwivedi, Swati

2014-01-01

Objective: To evaluate the interfacial morphology and the bond strength produced by the three-step, two-step and single-step bonding systems in primary teeth. Materials and Methods: Occlusal surfaces of 72 extracted human deciduous teeth were ground to expose the dentin. The teeth were divided into four groups: (a) Scotchbond Multipurpose (3M, ESPE), (b) Adh Se (Vivadent), (d) OptiBond All-in-One (Kerr) and (e)Futurabond NR (VOCO, Cuxhaven, Germany). The adhesives were applied to each group following the manufacturer’s instructions. Then, teeth from each group were divided into two groups: (A) For viewing interfacial morphology (32 teeth), with 8 teeth in each group, and (B) For measurement of bond strength (40 teeth), with 10 teeth in each group. All the samples were prepared for viewing under SEM. The statistical analysis was done using SPSS version 15.0 software. Results: Observational measurement of tag length in different adhesives revealed that Scotchbond had the most widely spread values with a range from 12.20 to 89.10μm while OptiBond AIO had the narrowest range (0 to 22.50). The bond strength of Scotchbond Multipurpose was significantly higher (7.4744±1.88763) (p<0.001) as compared to Futurabond NR (3.8070±1.61345), Adhe SE (4.4478 ± 1.3820) and OptiBond-all-in-one (4.4856±1.07925). Conclusion: The three-step bonding system showed better results as compared to simplified studied bonding systems PMID:24910694

Clinical Assessment of Various Obturating Techniques for Primary Teeth: A Comparative Study

PubMed Central

Tandon, Sandeep; Vijay, Akshat; Kalia, Garima; Rathore, Khushboo

2017-01-01

Introduction Lifelong preservation of tooth in a healthy state is the ultimate goal of dentistry. Premature loss of primary teeth is common due to caries, dental trauma or other causes. As the primary teeth are the best space maintainers, teeth with infected pulps should be retained until exfoliation, whenever possible. Aim The purpose of this in vivo study was to evaluate and compare the efficacy of different obturating methods used in primary teeth. Materials and Methods Forty one patients aged four to nine years with a total of 60 teeth were selected. Out of the 60 teeth, 32 were primary mandibular first molars and 28 were primary mandibular second molars, the sample was randomly divided into three groups. Disposable syringe, lentulo spiral and past inject were used for obturation. Postoperative evaluation was done for; quality of canal obturation, presence of voids using postoperative radiographs following obturation of teeth. The data were analysed to assess the success rate of the three methods used for obturation using Chi-square test. Results Among the three groups of the study, past inject exhibited the maximum number of optimally filled canals. Maximum number of underfilled canals was found with lentulospiral, and the maximum number of overfilled canals was seen with disposable syringe. Least number of voids was observed in canals filled with the past inject technique and disposable syringe. Conclusion The results suggest that the most successful technique for obturation of primary teeth was past inject. PMID:28893042

Color stability of different denture teeth materials: an in vitro study.

PubMed

Mutlu-Sagesen, L; Ergün, G; Ozkan, Y; Bek, B

2001-09-01

The aim of this in vitro study was to compare the color stability of commercially available porcelain, reinforced acrylic, and conventional acrylic denture teeth materials used in removable prostheses. Two brands of porcelain (Unilux-Enta Lactona-Holland and Vivoperl-Ivoclar-Liechtenstein), 2 brands of reinforced acrylic (Optodent-Bayer-Germany and Ivolek-Ivoclar-Liechtenstein), and 2 brands of conventional acrylic (Isodent-Güney Diş Deposu-Turkey and Samed-Turkey), were made, for a total of 6 different denture teeth groups. Denture teeth were subjected to 3 staining solutions (filtered coffee, tea, and cola) and distilled water. From each group of denture teeth, 4 sets of maxillary anterior denture teeth were immersed in each of the 4 solutions. The color values of denture teeth were measured colorimetrically with the Gardner XL 20 Tristimulus Colorimeter (Gardner Lab. Inc., Bethesda, Maryland, USA). Color changes were characterized in the CIEL*a*b* color space. Color change values were determined after 1 day, 1 week, 2 weeks, and 4 weeks. The color difference values were calculated and then evaluated by two-way ANOVA statistically. The filtered coffee solution was found to be more chromogenic than the other 2 staining solutions, while porcelain denture teeth materials were more color stable. Assuming the color change of deltaE* < 1.0 as a discernible limit and deltaE* = 3.3 as an acceptable value, the filtered coffee, tea, and cola had slight staining effects on all 6 groups of denture teeth.

In Vitro Wear Resistance of Nano-Hybrid Composite Denture Teeth.

PubMed

Munshi, Nabeel; Rosenblum, Marc; Jiang, Shuying; Flinton, Robert

2017-04-01

To evaluate the wear resistance of nano-hybrid composite denture teeth as compared to two commonly used denture teeth: interpenetrating polymer network (IPN) and double crosslinking polymethylmethacrylate (PMMA) denture teeth. 18 styli and 18 disk specimens were prepared from the three denture tooth materials: nano-hybrid composite, IPN, and double crosslinking PMMA. The specimens were mounted in a two-body wear testing machine to simulate chewing in the complete denture. The amount of wear from the styli specimens were measured before and after using a digital micrometer, and the depth of the wear track from the disk specimens was measured using a noncontact 3D optical profilometer. The total wear from each denture tooth group was compared using one-way ANOVA with a 0.05 significance level. A Tukey post hoc test was used to determine differences between the three groups. The mean total wear in the nano-hybrid composite teeth group was 1.16 mm, SD = 0.5 mm, statistically significantly higher (p ≤ 0.0001) than the IPN (mean = 0.13 mm, SD = 0.05) and double crosslinking PMMA tooth groups (mean = 0.31 mm, SD = 0.19). There was no statistically significant difference between IPN denture teeth and double crosslinking PMMA denture teeth in the amount of wear. Nano-hybrid composite denture teeth exhibited statistically significantly more wear than the IPN and double crosslinking PMMA denture teeth. © 2015 by the American College of Prosthodontists.

Zipper Connectors for Flexible Electronic Circuits

NASA Technical Reports Server (NTRS)

Barnes, Kevin N.

2003-01-01

Devices that look and function much like conventional zippers on clothing have been proposed as connectors for flexible electronic circuits. Heretofore, flexible electronic circuits have commonly included rigid connectors like those of conventional rigid electronic circuits. The proposed zipper connectors would make it possible to connect and disconnect flexible circuits quickly and easily. Moreover, the flexibility of zipper connectors would make them more (relative to rigid connectors) compatible with flexible circuits, so that the advantages of flexible circuitry could be realized more fully. Like a conventional zipper, a zipper according to the proposal would include teeth anchored on flexible tapes, a slider with a loosely attached clasp, a box at one end of the rows of mating teeth, and stops at the opposite ends. The tapes would be made of a plastic or other dielectric material. On each of the two mating sides of the zipper, metal teeth would alternate with dielectric (plastic) teeth, there being two metal teeth for each plastic one. When the zipper was closed, each metal tooth from one side would be in mechanical and electrical contact with a designated metal tooth from the other side, and these mating metal teeth would be electrically insulated from the next pair of mating metal teeth by an intervening plastic tooth. The metal teeth would be soldered or crimped to copper tabs. Wires or other conductors connected to electronic circuits would be soldered or crimped to the ends of the tabs opposite the teeth.

The function and evolution of Msx genes: pointers and paradoxes.

PubMed

Davidson, D

1995-10-01

The Msx genes of vertebrates comprise a small family of chromosomally unlinked homeobox-containing genes related to the Drosophila gene muscle-segment homeobox (msh). Despite their ancient pedigree, the Msx genes are expressed in a range of vertebrate-specific tissues, including neural crest, cranial sensory placodes, bone and teeth. They are active in numerous systems, which have been used as models to study pattern formation and tissue interaction, and are, therefore, attracting a growing interest among developmental biologists. But beyond their presumed role as transcription factors, we do not know what their functions are in the cell or the embryo. Here, I review recent evidence that is beginning to address this problem and might eventually increase our understanding of how the vertebrate embryo has evolved.

Inspection and Analysis of Failed Transmissions

DTIC Science & Technology

2009-01-01

ABNORMAL WEAR FRONT PUMP NO ABNORMAL DETERIORATION OR WEAR, 60% PHOSPHATE COATING REMAINING ON PUMP GEAR TEETH CARRIERS AND GEARS NO ABNORMAL DETERIORATION...PHOSPHATE COATING REMAINING ON PUMP GEAR TEETH CARRIERS AND GEARS NO ABNORMAL DETERIORATION OR WEAR, SOME POLISHING ON GEAR TEETH SEALS SOFT AND PLIABLE...FRONT PUMP NO ABNORMAL DETERIORATION OR WEAR, ALL PHOSPHATE COATING REMAINING ON PUMP GEAR TEETH CARRIERS AND GEARS NO ABNORMAL DETERIORATION OR WEAR

Age estimation from dental cementum incremental lines and periodontal disease.

PubMed

Dias, P E M; Beaini, T L; Melani, R F H

2010-12-01

Age estimation by counting incremental lines in cementum added to the average age of tooth eruption is considered an accurate method by some authors, while others reject it stating weak correlation between estimated and actual age. The aim of this study was to evaluate this technique and check the influence of periodontal disease on age estimates by analyzing both the number of cementum lines and the correlation between cementum thickness and actual age on freshly extracted teeth. Thirty one undecalcified ground cross sections of approximately 30 µm, from 25 teeth were prepared, observed, photographed and measured. Images were enhanced by software and counts were made by one observer, and the results compared with two control-observers. There was moderate correlation ((r)=0.58) for the entire sample, with mean error of 9.7 years. For teeth with periodontal pathologies, correlation was 0.03 with a mean error of 22.6 years. For teeth without periodontal pathologies, correlation was 0.74 with mean error of 1.6 years. There was correlation of 0.69 between cementum thickness and known age for the entire sample, 0.25 for teeth with periodontal problems and 0.75 for teeth without periodontal pathologies. The technique was reliable for periodontally sound teeth, but not for periodontally diseased teeth.

[Investigation of status of dental caries in children of primary school in Hangzhou city from 2009 to 2011].

PubMed

Hu, Qi-yong; Liu, Min; Wang, Ren-fei; Li, Xiao-feng; Jing, Chang; Tian, Xiao-hua

2013-04-01

To investigate the status of dental caries in children of primary school in Hangzhou City from 2009 to 2011. The status of dental caries was examined annually from 2009 to 2011, and the caries prevalence, filling rates, mean DMFT/dmft were recorded. SPSS 13.0 software package was used for statistical analysis. From 2009 to 2011, the caries prevalence of deciduous teeth were 49.27%, 48.09% and 48.33%, mean dmft were 2.78, 2.81 and 2.84, filling rates of deciduous teeth were 3.92%, 4.31% and 4.28%, respectively. No significant difference was found in the caries prevalence of temporary teeth, filling rates of temporary teeth, mean dmft. For the permanent teeth, the caries prevalence were 20.24%, 18.48% and 15.85%, mean DMFT were 0.46, 0.41 and 0.33, filling rates were 10.17%, 15.67% and 23.00%, respectively. From 2009 to 2011, the caries prevalence and mean DMFT of permanent teeth was decreased, while the filling rate was increased. In the past three years, the status of dental caries of permanent teeth shows a remarkable improving tendency in children of primary school in Hangzhou City. However, the status of dental caries of deciduous teeth presents no significant improvement.

From Teeth to Baleen and Raptorial to Bulk Filter Feeding in Mysticete Cetaceans: The Role of Paleontological, Genetic, and Geochemical Data in Feeding Evolution and Ecology.

PubMed

Berta, Annalisa; Lanzetti, Agnese; Ekdale, Eric G; Deméré, Thomas A

2016-12-01

The origin of baleen and filter feeding in mysticete cetaceans occurred sometime between approximately 34 and 24 million years ago and represents a major macroevolutionary shift in cetacean morphology (teeth to baleen) and ecology (raptorial to filter feeding). We explore this dramatic change in feeding strategy by employing a diversity of tools and approaches: morphology, molecules, development, and stable isotopes from the geological record. Adaptations for raptorial feeding in extinct toothed mysticetes provide the phylogenetic context for evaluating morphological apomorphies preserved in the skeletons of stem and crown edentulous mysticetes. In this light, the presence of novel vascular structures on the palates of certain Oligocene toothed mysticetes is interpreted as the earliest evidence of baleen and points to an intermediate condition between an ancestral condition with teeth only and a derived condition with baleen only. Supporting this step-wise evolutionary hypothesis, evidence from stable isotopes show how changes in dental chemistry in early toothed mysticetes tracked the changes in diet and environment. Recent discoveries also demonstrate how this transition was made possible by radical changes in cranial ontogeny. In addition, genetic mutations and the possession of dental pseudogenes in extant baleen whales support a toothed ancestry for mysticetes. Molecular and morphological data also document the dramatic developmental shifts that take place in extant fetal baleen whales, in skull development, resorption of a fetal dentition and growth of baleen. The mechanisms involved in this complex evolutionary transition that entails multiple, integrated aspects of anatomy and ecology are only beginning to be understood, and future work will further clarify the processes underlying this macroevolutionary pattern. © The Author 2016. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.

Ex vivo imaging of early dental caries within the interproximal space

NASA Astrophysics Data System (ADS)

Choo-Smith, Lin-P'ing; Hewko, Mark D.; Dufour, Marc L.; Fulton, Crystal; Qiu, Pingli; Gauthier, Bruno; Padioleau, Christian; Bisaillon, Charles-Etienne; Dong, Cecilia; Cleghorn, Blaine M.; Lamouche, Guy; Sowa, Michael G.

2009-02-01

Optical coherence tomography (OCT) is emerging as a technology that can potentially be used for the detection and monitoring of early dental enamel caries since it can provide high-resolution depth imaging of early lesions. To date, most caries detection optical technologies are well suited for examining caries at facial, lingual, incisal and occlusal surfaces. The approximal surfaces between adjacent teeth are difficult to examine due to lack of visual access and limited space for these new caries detection tools. Using a catheter-style probe developed at the NRC-Industrial Materials Institute, the probe was inserted into the interproximal space to examine the approximal surfaces with OCT imaging at 1310 nm. The probe was rotated continuously and translated axially to generate depth images in a spiral fashion. The probe was used in a mock tooth arch model consisting of extracted human teeth mounted with dental rope wax in their anatomically correct positions. With this ex vivo model, the probe provided images of the approximal surfaces revealing morphological structural details, regions of calculus, and especially regions of early dental caries (white spot lesions). Results were compared with those obtained from OCT imaging of individual samples where the approximal surfaces of extracted teeth are accessible on a lab-bench. Issues regarding access, regions of interest, and factors to be considered in an in vivo setting will be discussed. Future studies are aimed at using the probe in vivo with patient volunteers.

Dental caries - not just holes in teeth! A perspective.

PubMed

Bowen, W H

2016-06-01

Cavitation in teeth results from a pathogenic process termed dental caries that has occurred on the tooth surface for weeks or even years. Accumulation of dental plaque (biofilm) on the tooth is usually the first manifestation of the disease. Although acid production is the immediate and proximal cause of dissolution of teeth; it is the milieu within which the acid is formed that should be of primary concern. Focusing on the 'critical pH' has detracted attention from the more biological aspects (biofilm formation) of dental caries. Dental caries is unique; it is a biological process occurring on essentially an inert surface. Investigation of the multitude of interactions occurring in plaque ranging from enamel interfaces to surfaces of bacteria and matrices poses challenges worthy of the best scientific minds. The mouth clearly offers unique opportunities to investigate the multi facets of biofilm formation in vivo, generating data that have relevance way beyond the mouth. Prevention of this ubiquitous disease, dental caries, continues to present serious challenges. The public health benefits of fluoride delivered in its various formats are well recognized. Nevertheless, additional preventive approaches are required. Overcoming the rapid clearance of agents from the mouth is particularly challenging. Building on the polymerizing capacity of glucosyltransferases it may be possible to incorporate a therapeutic agent into the matrix plaque, thereby delivering therapeutic agents precisely to where they are needed. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Temperature variation during apicectomy with Er:YAG laser.

PubMed

Bodrumlu, Emre; Keskiner, Ilker; Sumer, Mahmut; Sumer, A Pinar; Telcıoglu, N Tuba

2012-08-01

The purpose of this in vitro study was to evaluate the generated temperature of the Er:YAG laser, with three different pulse durations for apicectomy, compared with tungsten bur and surgical saw. Apicectomy is an endodontic surgery performed to remove the root apex and curette adjacent periapical tissue because of lesions of the apical area that are not healing properly. Sixty single-rooted extracted human teeth were resected by three cutting methods: tungsten bur, surgical saw, and Er:YAG laser irradiation with three different pulse durations; pulse duration 50 μs, pulse duration 100 μs, and pulse duration 300 μs. Teflon-insulated, type K thermocouples were used to measure temperature changes during the apicectomy process. Data were analyzed using the general linear models procedure of the SPSS statistical software program. Although there was no statistically significant difference for the mean values of temperature changes at 1 mm away to the cutting site of teeth, there was statistically significant difference among groups for the mean values of temperature changes at 3 mm away to the cutting site of teeth. Additionally, there was statistically significant difference among groups for the total time required for apicectomy. The laser irradiation with pulse duration 50 μs appears to have the lowest temperature rise and the shortest time required for apicectomy of the three pulse durations. However, Er:YAG laser for apicectomy in all pulse durations could be used safely for resection in endodontics in the presence of sufficient water.

Review of research on the mechanical properties of the human tooth

PubMed Central

Zhang, Ya-Rong; Du, Wen; Zhou, Xue-Dong; Yu, Hai-Yang

2014-01-01

‘Bronze teeth' reflect the mechanical properties of natural teeth to a certain extent. Their mechanical properties resemble those of a tough metal, and the gradient of these properties lies in the direction from outside to inside. These attributes confer human teeth with effective mastication ability. Understanding the various mechanical properties of human teeth and dental materials is the basis for the development of restorative materials. In this study, the elastic properties, dynamic mechanical properties (visco-elasticity) and fracture mechanical properties of enamel and dentin were reviewed to provide a more thorough understanding of the mechanical properties of human teeth. PMID:24743065

Characteristics of Teeth: A Review of Size, Shape, Composition, and Appearance of Maxillary Anterior Teeth.

PubMed

McGowan, Steve

2016-03-01

Although digital technologies play an increasingly integral role in dentistry, there remains a need for dental professionals to understand the fundamentals of tooth anatomy, form, occlusion, and color science. In this article, the size, shape, composition, and appearance of maxillary anterior teeth will be discussed from esthetic and functional perspectives. A total of 600 extracted maxillary incisors were studied: 200 each of central incisors, lateral incisors, and cuspids. The purpose of the article is to exhibit and discuss factors that make teeth unique and diverse. Understanding these aspects of teeth aids dental professionals in more effectively creating realistic and highly esthetic restorations for patients.

Design Models for Shaping of a Tooth Profile of External Fine-Module Ratchet Teeth

NASA Astrophysics Data System (ADS)

Sharkov, O. V.; Koryagin, S. I.; Velikanov, N. L.

2016-04-01

Simulation of the shaping for the fine-module external ratchet teeth at which the contacting surfaces are formed by the straight segments is considered in this paper. The design schemes for shaping of the proposed ratchet teeth by a shaper cutter and a rack are obtained. It is defined that the maximum length of the straight segment of the front edge ratchet teeth will be formed at shaping by a rack cutter. The effect of a module, a gradient angle and a radius of blank circles on the length of the straight segment of the front edge ratchet teeth is investigated.

The Basics of Braces

MedlinePlus

... that attaches to the back teeth, providing stronger force to move the teeth. The orthodontist also might recommend that your child have one or more teeth removed to create more space in his or her mouth. Once the braces ...

Bruxism (Teeth Grinding or Clenching) (For Parents)

MedlinePlus

... cases where the grinding and clenching make a child's face and jaw sore or damage the teeth, dentists may prescribe a special night guard. Molded to a child's teeth, the night guard is similar to the ...

Taking Care of Your Teeth

MedlinePlus

... Educators Search English Español Taking Care of Your Teeth KidsHealth / For Teens / Taking Care of Your Teeth ... may need braces or have other issues. More Dental Problems Dental caries (tooth decay) can attack the ...

Differential-Evolution Control Parameter Optimization for Unmanned Aerial Vehicle Path Planning

PubMed Central

Kok, Kai Yit; Rajendran, Parvathy

2016-01-01

The differential evolution algorithm has been widely applied on unmanned aerial vehicle (UAV) path planning. At present, four random tuning parameters exist for differential evolution algorithm, namely, population size, differential weight, crossover, and generation number. These tuning parameters are required, together with user setting on path and computational cost weightage. However, the optimum settings of these tuning parameters vary according to application. Instead of trial and error, this paper presents an optimization method of differential evolution algorithm for tuning the parameters of UAV path planning. The parameters that this research focuses on are population size, differential weight, crossover, and generation number. The developed algorithm enables the user to simply define the weightage desired between the path and computational cost to converge with the minimum generation required based on user requirement. In conclusion, the proposed optimization of tuning parameters in differential evolution algorithm for UAV path planning expedites and improves the final output path and computational cost. PMID:26943630

Root canal configurations of third molar teeth. A comparison with first and second molars in the Turkish population.

PubMed

Sert, Semih; Sahinkesen, Güneş; Topçu, Fulya T; Eroğlu, Seyda E; Oktay, Elif A

2011-12-01

The purpose of the current study was to determine the similarities of maxillary and mandibular third molars with the other molar teeth. A total of 2016 extracted maxillary and mandibular permanent teeth were evaluated. The teeth were divided into six groups. The teeth were stored in 5% nitric acid solution for 7 days, then placed in increasing concentrations of ethyl alcohol. The teeth were rendered transparent by immersion in xylene solution for 4 days until complete transparency was achieved. Three roots were present in 93.0% of the maxillary molars, and 91.3% of the second molars. Among the maxillary third molars, 35.5% were single-rooted and 24.9% of the mandibular third molars had single roots. Double roots were present in 69.2% of the mandibular third molars, and 5.4% had three roots. Four new root canal configurations were encountered in this study. The root canal configurations of the mandibular and maxillary teeth showed similarities with the results of other studies performed in different populations. © 2010 The Authors. Australian Endodontic Journal © 2010 Australian Society of Endodontology.

Non-surgical root canal treatment of Dens invaginatus: reports of three cases.

PubMed

Cengiz, Sevi Burcak; Korasli, Deniz; Ziraman, Fatmagul; Orhan, Kaan

2006-02-01

Dens invaginatus is a rare developmental malformation of teeth showing a deep infolding of enamel and dentine which may extend deep into the root. To date, conventional root canal therapy, endodontic surgery and extraction have been reported as treatment modalities, when the pulpo-dentinal complex of such teeth is affected. In the present report, non-surgical endodontic treatment of three maxillary lateral incisors with invaginatus (DI) is discussed. The Tri Auto ZX rotary system was used for shaping the root canals of two affected teeth and the Profile system was used in the third. Teeth with periradicular lesions received calcium hydroxide as an interim therapy. Two teeth were obturated with gutta percha points and AH Plus sealer using cold lateral compaction. In the third case, obturation was accomplished using a coated carrier system (Thermafil) due to the specific shape of the root canal system. Twelve months postoperatively all teeth were asymptomatic with resolution of the periapical radiolucency on two affected teeth, as confirmed radiographically. Healing was achieved without any need for further surgical intervention.

Reasons for extraction in primary teeth among 5-12 years school children in Haryana, India- A cross-sectional study

PubMed Central

Gupta, Nidhi; Gupta, Preety; Arora, Vikram; Thakar, Sahil

2017-01-01

Background Due to high prevalence of oral diseases extraction of primary teeth is a common and a major concern in developing countries. These teeth are given least importance as they are believed to shed off automatically, thus leading to serious problems like crowding and malocclusion. Material and Methods A cross sectional study was carried out among children aged 5 to 12 years among 1347 children. The data was recorded on a prestructured questionnaire. Reasons for extraction of teeth were based on Kay and Blinkhorn criteria. Results 20.4% children were having tooth loss due to various reasons. The main reason for extraction was found to be caries in 64.3% followed by trauma in maxillary teeth among 43.02% of children. Conclusions Presence of early loss of primary teeth result in occlusal disturbances and space loss among children. Hence, proper treatment regimens must be followed by the dental professionals and should be the need of the hour. Key words:Extraction, children, primary teeth, caries. PMID:28469820

Citric acid compounds of tangerines peel extract (Citrus reticulata) as potential materials teeth whitening

NASA Astrophysics Data System (ADS)

Pratiwi, F.; Tinata, J. K.; Prakasa, A. W.; Istiqomah; Hartini, E.; Isworo, S.

2017-04-01

Peel of citrus fruit (Citrus reticulata) has a variety of possible chemical compounds that may serve as a potential whitening teeth. This research is conducted on a laboratory scale; therefore, it needs to be developed on an application scale. A quasi-experimental was employed in this study. Citric acid extraction was carried out on the type of Sweet Orange (Citrus Aurantium L), Tangerine (Citrus Reticulata Blanco or Citrus Nobilis), Pomelo (Citrus Maxima Merr, Citrus grandis Osbeck), and Lemon (Citrus Limon Linn). Citric acid’s ability test as teeth whitener was performed on premolar teeth with concentrations of 2.5%, 5%, and 10%. The experiments were replicated in 3 times, and teeth whiteness level was measured using Shade Guide VITA Classical. The result of this research showed that citric acid in every kind of orange peel with various concentration has different abilities on whitening teeth. The highest colour level obtained from Tangerine peel’s citric acid concentration of 5%. Orange peel extract has the best teeth whitening abilities tested by the method of Gass Chromatography to know the active ingredients.

Endodontic treatment of developmental anomalies in posterior teeth: treatment of geminated/fused teeth--report of two cases.

PubMed

Tsesis, I; Steinbock, N; Rosenberg, E; Kaufman, A Y

2003-05-01

Gemination or fusion is a rare occurrence in the mandibular posterior teeth. Endodontic treatment of these teeth needs special care and attention to the bizarre anatomy. The aim of this article is to describe the problems encountered and the strategy in treating such cases. Two cases of complex endodontic treatment of fused/geminated teeth are presented. The first is an 11-year-old girl with an anomalous 'double' first mandibular molar and premolar diagnosed as having necrotic pulp with chronic apical abscess of endodontic origin; the second is a 16-year-old boy with 'double' second and supernumerary mandibular molars, who was diagnosed with irreversible pulpitis. Both cases were treated successfully in multiple appointments. The common features and treatment modalities are discussed. Failure to diagnose fused/geminated teeth leads to misdiagnosis and a treatment plan that could cause permanent damage and tooth loss. Generally, there is communication between root canal systems of fused/geminated teeth which should be treated as one entity. Use of magnification is an important aid during treatment.

[Satisfaction about physical appearance and teeth. Results of a nationwide study].

PubMed

Gresnigt-Bekker, C O V M; de Jongh, A; Vo, G; Lie, F; Oosterink-Wubbe, F M D; van Rood, Y

2008-07-01

In a study involving a group of 907 randomly selected Dutch individuals, satisfaction about one's physical appearance and satisfaction about the appearance of one's teeth were assessed. Furthermore, the relationship between body esteem and happiness was explored. Three quarters of the respondents were satisfied about their physical appearance, while 70% was satisfied about the appearance of their teeth. Women and people with a non-Dutch background were significantly less likely to be satisfied about their physical appearance than men and those with a Dutch background. Individuals 30 years old and younger were more likely to be satisfied about their teeth than those who were older. Almost two third of the respondents (64%) reported that the appearance of their teeth contributed positively to their happiness. Women and people with a non-Dutch background were most likely to indicate that the appearance of their teeth contributed to their happiness. Satisfaction about general physical appearance and appearance of the teeth were significantly associated with happiness. Prospective studies are needed to examine to what extent esthetically motivated dental treatments make people happy and enhance their general well-being.

Postprocedural problems in an overdenture population: a longitudinal study.

PubMed

Ettinger, Ronald L; Qian, Fang

2004-05-01

This study reports on endodontic and other post-procedural problems experienced by overdenture patients from 1973 to 1996. There were 395 subjects enrolled in the study; 273 fulfilled the recall criteria. At recall, all subjects were examined by a single examiner, and appropriate maintenance care was performed. The 273 subjects had 666 abutments and 626 endodontically treated teeth; of these, 51 subjects had postprocedural problems in 81 teeth. Thus, 87.1% of the endodontically treated teeth had no postprocedural problems, and 12.9% had postprocedural problems. Of the subpopulation with postprocedural problems, the most common problem was endodontically treated teeth developing periradicular lesions (37.0%) because of recurrent caries causing loss of the restoration sealing the root canal. Twenty of the 30 teeth were successfully retreated. The next most common problem was vertical root fractures (30.9%), followed by vital teeth developing periradicular lesions (19.8%). Most of the failures could have been prevented by better oral hygiene. Vertical root fractures were statistically associated with abutments in the maxilla and opposed by natural teeth; protection of these abutments with thimble crowns could prevent fractures.

76 FR 11940 - Airworthiness Directives; Turbomeca Model Arriel 1E2, 1S, and 1S1 Turboshaft Engines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... discrepancies led to a ``one-off'' abnormal evolution of gas generator (NG) rating during engine starting. In... evolution of gas generator (NG) rating during engine starting. In one of these cases, this resulted in an...

Overpressures in the Uinta Basin, Utah: Analysis using a three-dimensional basin evolution model

NASA Astrophysics Data System (ADS)

McPherson, Brian J. O. L.; Bredehoeft, John D.

2001-04-01

High pore fluid pressures, approaching lithostatic, are observed in the deepest sections of the Uinta basin, Utah. Geologic observations and previous modeling studies suggest that the most likely cause of observed overpressures is hydrocarbon generation. We studied Uinta overpressures by developing and applying a three-dimensional, numerical model of the evolution of the basin. The model was developed from a public domain computer code, with addition of a new mesh generator that builds the basin through time, coupling the structural, thermal, and hydrodynamic evolution. Also included in the model are in situ hydrocarbon generation and multiphase migration. The modeling study affirmed oil generation as an overpressure mechanism, but also elucidated the relative roles of multiphase fluid interaction, oil density and viscosity, and sedimentary compaction. An important result is that overpressures by oil generation create conditions for rock fracturing, and associated fracture permeability may regulate or control the propensity to maintain overpressures.

Baby Teeth Link Autism and Heavy Metals, NIH Study Suggests

MedlinePlus

... Release Thursday, June 1, 2017 Baby teeth link autism and heavy metals, NIH study suggests Cross-section ... Sinai Health System Baby teeth from children with autism contain more toxic lead and less of the ...

Take Care of Your Teeth | NIH MedlinePlus the Magazine

MedlinePlus

... Feature: Fighting Gum Disease Take Care of Your Teeth Past Issues / Fall 2010 Table of Contents Ever ... never show him smiling? He suffered from poor dental health, lost his teeth at an early age, ...

Supernumerary Teeth in the Maxillary Anterior Region: The Dilemma of Early Versus Late Surgical Intervention.

PubMed

Sarne, Ofer; Shapira, Yehoshua; Blumer, Sigalit; Finkelstein, Tamar; Schonberger, Shirley; Bechor, Naomi; Shpack, Nir

Supernumerary teeth are the most common developmental dental anomalies in the maxillary anterior region causing interference to the developing permanent incisors resulting in poor dental and facial esthetics. Two different opinions regarding the timing for surgical removal of the supernumerary teeth are presented. In this case report, three brothers with supernumerary teeth in the maxillary anterior region are presented, their surgical and orthodontic management and outcome are discussed.

Near-IR imaging of cracks in teeth

NASA Astrophysics Data System (ADS)

Fried, William A.; Simon, Jacob C.; Lucas, Seth; Chan, Kenneth H.; Darling, Cynthia L.; Staninec, Michal; Fried, Daniel

2014-02-01

Dental enamel is highly transparent at near-IR wavelengths and several studies have shown that these wavelengths are well suited for optical transillumination for the detection and imaging of tooth decay. We hypothesize that these wavelengths are also well suited for imaging cracks in teeth. Extracted teeth with suspected cracks were imaged at several wavelengths in the near-IR from 1300-1700-nm. Extracted teeth were also examined with optical coherence tomography to confirm the existence of suspected cracks. Several teeth of volunteers were also imaged in vivo at 1300-nm to demonstrate clinical potential. In addition we induced cracks in teeth using a carbon dioxide laser and imaged crack formation and propagation in real time using near-IR transillumination. Cracks were clearly visible using near-IR imaging at 1300-nm in both in vitro and in vivo images. Cracks and fractures also interfered with light propagation in the tooth aiding in crack identification and assessment of depth and severity.

Corono-radicular biological restoration of maxillary central incisors by direct method.

PubMed

Aggarwal, Sonia; Sahoo, Sujit Ranjan; Pandharkar, Kartik

2014-11-01

This case report refers to the esthetic and functional restorations of extensively damaged maxillary central incisors with dental caries in a 32-year-old woman, with the use of posts and crowns made from natural extracted teeth. Proper restoration of such teeth with the use of natural teeth fragments are known as "biological restoration." Biological restorations can be done by using the fragments of the patients own tooth and if that is not available, tooth fragment can be obtained from an extracted tooth. These biological posts and crowns present a low cost option and an alternative technique for the morphofunctional recovery of extensively damaged teeth. There are limitations with the use of natural extracted teeth (homogenous bonding) for restoration such as the difficulty of finding teeth with a similar color and shape as that of the destroyed element, or patient may refuse to accept a tooth fragment from another patient, which prevents execution of the restoration.

Modelling tooth–prey interactions in sharks: the importance of dynamic testing

PubMed Central

Farina, Stacy C.; Brash, Jeffrey; Summers, Adam P.

2016-01-01

The shape of shark teeth varies among species, but traditional testing protocols have revealed no predictive relationship between shark tooth morphology and performance. We developed a dynamic testing device to quantify cutting performance of teeth. We mimicked head-shaking behaviour in feeding large sharks by attaching teeth to the blade of a reciprocating power saw fixed in a custom-built frame. We tested three tooth types at biologically relevant speeds and found differences in tooth cutting ability and wear. Teeth from the bluntnose sixgill (Hexanchus griseus) showed poor cutting ability compared with tiger (Galeocerdo cuvier), sandbar (Carcharhinus plumbeus) and silky (C. falciformis) sharks, but they also showed no wear with repeated use. Some shark teeth are very sharp at the expense of quickly dulling, while others are less sharp but dull more slowly. This demonstrates that dynamic testing is vital to understanding the performance of shark teeth. PMID:27853592

The dental cavities of equine cheek teeth: three-dimensional reconstructions based on high resolution micro-computed tomography

PubMed Central

2012-01-01

Background Recent studies reported on the very complex morphology of the pulp system in equine cheek teeth. The continuous production of secondary dentine leads to distinct age-related changes of the endodontic cavity. Detailed anatomical knowledge of the dental cavities in all ages is required to explain the aetiopathology of typical equine endodontic diseases. Furthermore, data on mandibular and maxillary pulp systems is in high demand to provide a basis for the development of endodontic therapies. However, until now examination of the pulp cavity has been based on either sectioned teeth or clinical computed tomography. More precise results were expected by using micro-computed tomography with a resolution of about 0.1 mm and three-dimensional reconstructions based on previous greyscale analyses and histological verification. The aim of the present study was to describe the physiological configurations of the pulp system within a wide spectrum of tooth ages. Results Maxillary teeth: All morphological constituents of the endodontic cavity were present in teeth between 4 and 16 years: Triadan 06s displayed six pulp horns and five root canals, Triadan 07-10s five pulp horns and four root canals and Triadan 11s seven pulp horns and four to six root canals. A common pulp chamber was most frequent in teeth ≤5 years, but was found even in a tooth of 9 years. A large variety of pulp configurations was observed within 2.5 and 16 years post eruption, but most commonly a separation into mesial and distal pulp compartments was seen. Maxillary cheek teeth showed up to four separate pulp compartments but the frequency of two, three and four pulp compartments was not related to tooth age (P > 0.05). In Triadan 06s, pulp horn 6 was always connected to pulp horns 1 and 3 and root canal I. In Triadan 11s, pulp horns 7 and 8 were present in variable constitutions. Mandibular teeth: A common pulp chamber was present in teeth up to 15 years, but most commonly seen in teeth ≤5 years. A segmented pulp system was found in 72% of the investigated teeth. Segmentation into separate mesial and distal pulp compartments was most commonly present. Pulp horn 4 coalesced either with the mesial pulp horns 1 and 3 or with the distal pulp horns 2 and 5. Conclusions Details of the pulpar anatomy of equine cheek teeth are provided, supporting the continuous advancement in endodontic therapy. Numerous individual configurations of the pulp system were obtained in maxillary cheek teeth, but much less variability was seen in mandibular cheek teeth. PMID:23006500

Inferring biological evolution from fracture patterns in teeth.

PubMed

Lawn, Brian R; Bush, Mark B; Barani, Amir; Constantino, Paul J; Wroe, Stephen

2013-12-07

It is hypothesised that specific tooth forms are adapted to resist fracture, in order to accommodate the high bite forces needed to secure, break down and consume food. Three distinct modes of tooth fracture are identified: longitudinal fracture, where cracks run vertically between the occlusal contact and the crown margin (or vice versa) within the enamel side wall; chipping fracture, where cracks run from near the edge of the occlusal surface to form a spall in the enamel at the side wall; and transverse fracture, where a crack runs horizontally through the entire section of the tooth to break off a fragment and expose the inner pulp. Explicit equations are presented expressing critical bite force for each fracture mode in terms of characteristic tooth dimensions. Distinctive transitions between modes occur depending on tooth form and size, and loading location and direction. Attention is focussed on the relatively flat, low-crowned molars of omnivorous mammals, including humans and other hominins and the elongate canines of living carnivores. At the same time, allusion to other tooth forms - the canines of the extinct sabre-tooth (Smilodon fatalis), the conical dentition of reptiles, and the columnar teeth of herbivores - is made to highlight the generality of the methodology. How these considerations impact on dietary behaviour in fossil and living taxa is discussed. © 2013 Elsevier Ltd. All rights reserved.

Clinical decisions for anterior restorations: the concept of restorative volume.

PubMed

Cardoso, Jorge André; Almeida, Paulo Júlio; Fischer, Alex; Phaxay, Somano Luang

2012-12-01

The choice of the most appropriate restoration for anterior teeth is often a difficult decision. Numerous clinical and technical factors play an important role in selecting the treatment option that best suits the patient and the restorative team. Experienced clinicians have developed decision processes that are often more complex than may seem. Less experienced professionals may find difficulties making treatment decisions because of the widely varied restorative materials available and often numerous similar products offered by different manufacturers. The authors reviewed available evidence and integrated their clinical experience to select relevant factors that could provide a logical and practical guideline for restorative decisions in anterior teeth. The presented concept of restorative volume is based on structural, optical, and periodontal factors. Each of these factors will influence the short- and long-term behavior of restorations in terms of esthetics, biology, and function. Despite the marked evolution of esthetic restorative techniques and materials, significant limitations still exist, which should be addressed by researchers. The presented guidelines must be regarded as a mere orientation for risk analysis. A comprehensive individual approach should always be the core of restorative esthetic treatments. The complex decision process for anterior esthetic restorations can be clarified by a systematized examination of structural, optical, and periodontal factors. The basis for the proposed thought process is the concept of restorative volume that is a contemporary interpretation of restoration categories and their application. © 2012 Wiley Periodicals, Inc.