CFD Simulations of the IHF Arc-Jet Flow: Compression-Pad/Separation Bolt Wedge Tests

NASA Technical Reports Server (NTRS)

Gokcen, Tahir; Skokova, Kristina A.

2017-01-01

This paper reports computational analyses in support of two wedge tests in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using two different wedge models, each placed in a free jet downstream of a corresponding different conical nozzle in the Ames 60-MW Interaction Heating Facility. Panel test articles included a metallic separation bolt imbedded in the compression-pad and heat shield materials, resulting in a circular protuberance over a flat plate. As part of the test calibration runs, surface pressure and heat flux measurements on water-cooled calibration plates integrated with the wedge models were also obtained. Surface heating distributions on the test articles as well as arc-jet test environment parameters for each test configuration are obtained through computational fluid dynamics simulations, consistent with the facility and calibration measurements. The present analysis comprises simulations of the non-equilibrium flow field in the facility nozzle, test box, and flow field over test articles, and comparisons with the measured calibration data.

Classification Consistency and Accuracy for Complex Assessments Using Item Response Theory

ERIC Educational Resources Information Center

Lee, Won-Chan

2010-01-01

In this article, procedures are described for estimating single-administration classification consistency and accuracy indices for complex assessments using item response theory (IRT). This IRT approach was applied to real test data comprising dichotomous and polytomous items. Several different IRT model combinations were considered. Comparisons…

Buckling Test Results from the 8-Foot-Diameter Orthogrid-Stiffened Cylinder Test Article TA01. [Test Dates: 19-21 November 2008

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Waters, W. Allen, Jr.; Haynie, Waddy T.

2015-01-01

Results from the testing of cylinder test article SBKF-P2-CYLTA01 (referred to herein as TA01) are presented. The testing was conducted at the Marshall Space Flight Center (MSFC), November 19?21, 2008, in support of the Shell Buckling Knockdown Factor (SBKF) Project.i The test was used to verify the performance of a newly constructed buckling test facility at MSFC and to verify the test article design and analysis approach used by the SBKF project researchers. TA01 is an 8-foot-diameter (96-inches), 78.0-inch long, aluminum-lithium (Al-Li), orthogrid-stiffened cylindrical shell similar to those used in current state-of-the-art launch vehicle structures and was designed to exhibit global buckling when subjected to compression loads. Five different load sequences were applied to TA01 during testing and included four sub-critical load sequences, i.e., loading conditions that did not cause buckling or material failure, and one final load sequence to buckling and collapse. The sub-critical load sequences consisted of either uniform axial compression loading or combined axial compression and bending and the final load sequence subjected TA01 to uniform axial compression. Traditional displacement transducers and strain gages were used to monitor the test article response at nearly 300 locations and an advanced digital image correlation system was used to obtain low-speed and high-speed full-field displacement measurements of the outer surface of the test article. Overall, the test facility and test article performed as designed. In particular, the test facility successfully applied all desired load combinations to the test article and was able to test safely into the postbuckling range of loading, and the test article failed by global buckling. In addition, the test results correlated well with initial pretest predictions.

Transient Pressure Test Article Test Program

NASA Technical Reports Server (NTRS)

Vibbart, Charles M.

1989-01-01

The Transient Pressure Test Article (TPTA) test program is being conducted at a new test facility located in the East Test Area at the National Aeronautics and Space Administration's (NASA's) Marshall Space Flight Center (MSFC) in Huntsville, Alabama. This facility, along with the special test equipment (STE) required for facility support, was constructed specifically to test and verify the sealing capability of the Redesigned Solid Rocket Motor (RSRM) field, igniter, and nozzle joints. The test article consists of full scale RSRM hardware loaded with inert propellant and assembled in a short stack configuration. The TPTA is pressurized by igniting a propellant cartridge capable of inducing a pressure rise rate which stimulates the ignition transient that occurs during launch. Dynamic loads are applied during the pressure cycle to simulate external tank attach (ETA) strut loads present on the ETA ring. Sealing ability of the redesigned joints is evaluated under joint movement conditions produced by these combined loads since joint sealing ability depends on seal resilience velocity being greater than gap opening velocity. Also, maximum flight dynamic loads are applied to the test article which is either pressurized to 600 psia using gaseous nitrogen (GN2) or applied to the test article as the pressure decays inside the test article on the down cycle after the ignition transient cycle. This new test facility is examined with respect to its capabilities. In addition, both the topic of test effectiveness versus space vehicle flight performance and new aerospace test techniques, as well as a comparison between the old SRM design and the RSRM are presented.

ATS-PD: An Adaptive Testing System for Psychological Disorders

ERIC Educational Resources Information Center

Donadello, Ivan; Spoto, Andrea; Sambo, Francesco; Badaloni, Silvana; Granziol, Umberto; Vidotto, Giulio

2017-01-01

The clinical assessment of mental disorders can be a time-consuming and error-prone procedure, consisting of a sequence of diagnostic hypothesis formulation and testing aimed at restricting the set of plausible diagnoses for the patient. In this article, we propose a novel computerized system for the adaptive testing of psychological disorders.…

GED Items. The Newsletter of the GED Testing Service, 1997.

ERIC Educational Resources Information Center

Hone, Lisa Richards, Ed.

1997-01-01

This document consists of the six issues of the newsletter of the General Educational Development Testing (GED) Service published during 1997. The lead articles of the six issues are, respectively: (1) "Task Force Considers Improvements to Test Center Security Rules," by Cathy Allin discusses the implementation of a monitoring team and…

[Measurement properties of self-report questionnaires published in Korean nursing journals].

PubMed

Lee, Eun-Hyun; Kim, Chun-Ja; Kim, Eun Jung; Chae, Hyun-Ju; Cho, Soo-Yeon

2013-02-01

The purpose of this study was to evaluate measurement properties of self-report questionnaires for studies published in Korean nursing journals. Of 424 Korean nursing articles initially identified, 168 articles met the inclusion criteria. The methodological quality of the measurements used in the studies and interpretability were assessed using the COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) checklist. It consists of items on internal consistency, reliability, measurement error, content validity, construct validity including structural validity, hypothesis testing, cross-cultural validity, and criterion validity, and responsiveness. For each item of the COSMIN checklist, measurement properties are rated on a four-point scale: excellent, good, fair, and poor. Each measurement property is scored with worst score counts. All articles used the classical test theory for measurement properties. Internal consistency (72.6%), construct validity (56.5%), and content validity (38.2%) were most frequently reported properties being rated as 'excellent' by COSMIN checklist, whereas other measurement properties were rarely reported. A systematic review of measurement properties including interpretability of most instruments warrants further research and nursing-focused checklists assessing measurement properties should be developed to facilitate intervention outcomes across Korean studies.

A Review and Comparison of the Reliabilities of the MMPI-2, MCMI-III, and PAI Presented in Their Respective Test Manuals

ERIC Educational Resources Information Center

Wise, Edward A.; Streiner, David L.; Walfish, Steven

2010-01-01

This article provides a review of the literature to determine the most frequently used personality tests. Based on this review, internal consistency and test-retest reliability coefficients from the test manuals for the Minnesota Multiphasic Personality Inventory-2 (MMPI-2), Millon Clinical Multiaxial Inventory-III (MCMI-III), and Personality…

A Nonparametric Approach to Estimate Classification Accuracy and Consistency

ERIC Educational Resources Information Center

Lathrop, Quinn N.; Cheng, Ying

2014-01-01

When cut scores for classifications occur on the total score scale, popular methods for estimating classification accuracy (CA) and classification consistency (CC) require assumptions about a parametric form of the test scores or about a parametric response model, such as item response theory (IRT). This article develops an approach to estimate CA…

Distributed Acoustic Sensing (DAS) for Periodic Hydraulic Tests: Laboratory Data

DOE Data Explorer

Coleman, Thomas

2015-02-27

These data were collected in the laboratory located at California State University Long Beach. They consist of DAS data collected from a fiber optic cable placed in a tank of water, subjected to oscillating head. These tests are described in the article linked below.

Raising the standards of the calf-raise test: a systematic review.

PubMed

Hébert-Losier, Kim; Newsham-West, Richard J; Schneiders, Anthony G; Sullivan, S John

2009-11-01

The calf-raise test is used by clinicians and researchers in sports medicine to assess properties of the calf muscle-tendon unit. The test generally involves repetitive concentric-eccentric muscle action of the plantar-flexors in unipedal stance and is quantified by the number of raises performed. Although the calf-raise test appears to have acceptable reliability and face validity, and is commonly used for medical assessment and rehabilitation of injuries, no universally acceptable test parameters have been published to date. A systematic review of the existing literature was conducted to investigate the consistency as well as universal acceptance of the evaluation purposes, test parameters, outcome measurements and psychometric properties of the calf-raise test. Nine electronic databases were searched during the period May 30th to September 21st 2008. Forty-nine articles met the inclusion criteria and were quality assessed. Information on study characteristics and calf-raise test parameters, as well as quantitative data, were extracted; tabulated; and statistically analysed. The average quality score of the reviewed articles was 70.4+/-12.2% (range 44-90%). Articles provided various test parameters; however, a consensus was not ascertained. Key testing parameters varied, were often unstated, and few studies reported reliability or validity values, including sensitivity and specificity. No definitive normative values could be established and the utility of the test in subjects with pathologies remained unclear. Although adapted for use in several disciplines and traditionally recommended for clinical assessment, there is no uniform description of the calf-raise test in the literature. Further investigation is recommended to ensure consistent use and interpretation of the test by researchers and clinicians.

Test Anxiety in Mathematics among Early Undergraduate Students in a British University in Malaysia

ERIC Educational Resources Information Center

Karjanto, Natanael; Yong, Su Ting

2013-01-01

The level of test anxiety in mathematics subjects among early undergraduate students at the University of Nottingham Malaysia Campus is studied in this article. The sample consists of 206 students taking several mathematics modules who completed the questionnaires on test anxiety just before they entered the venue for midterm examinations. The…

Fabrication and testing of microchannel heat exchangers

NASA Astrophysics Data System (ADS)

Cuta, Judith M.; Bennett, Wendy D.; McDonald, Carolyn E.; Ravigururajan, T. S.

1995-09-01

Micro-channel heat-exchanger test articles were fabricated and performance tested. The heat exchangers are being developed for innovative applications, and have been shown to be capable of handling heat loads of up to 100 W/cm2. The test articles were fabricated to represent two different designs for the micro-channel portion of the heat exchanger. One design consists of 166 micro-channels etched in silicon substrate, and a second design consists of 54 micro-channels machined in copper substrate. The devices were tested in an experimental loop designed for performance testing in single- and two-phase flow with water and R124. Pressure and liquid subcooling can be regulated over the range of interest, and a secondary heat removal loop provides stable loop performance for steady-state tests. The selected operating pressures are approximately 0.344 MPa for distilled water and 0.689 MPa for R124. The temperature ranges are 15.5 to 138 C for distilled water and 15.5 to 46 C for R-124. The mass flow range 7.6 X 10-8 to 7.6 X 10MIN5 kg/min for both distilled water and R124.

Education Policy Analysis Archives, 2002: Numbers 1-25.

ERIC Educational Resources Information Center

Glass, Gene V., Ed.

2002-01-01

This document consists of articles 1 through 25 published in the electronic journal Education Policy Analysis Archives for the year 2002: (1) Testing and Diversity in Postsecondary Education: The Case of California (Daniel Koretz, Michael Russell, Chingwei David Shin, Cathy Horn, and Kelly Shasby); (2) State-Mandated Testing and Teachers Beliefs…

Vertical Drop Testing and Analysis of the Wasp Helicopter Skid Gear

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fuchs, Yvonne T.

2007-01-01

This report describes an experimental program to assess the impact performance of a skid gear for use on the Wasp kit-built helicopter, which is marketed by HeloWerks, Inc. of Hampton, Virginia. In total, five vertical drop tests were performed. The test article consisted of a skid gear mounted beneath a steel plate. A seating platform was attached to the upper surface of the steel plate, and two 95th percentile Hybrid III male Anthropomorphic Test Devices (ATDs) were seated on the platform and secured using a four-point restraint system. The test article also included ballast weights to ensure the correct position of the Center-of-Gravity (CG). Twenty-six channels of acceleration data were collected per test at 50,000 samples per second. The five drop tests were conducted on two different gear configurations. The details of these test programs are presented, as well as an occupant injury assessment. Finally, a finite element model of the skid gear test article was developed for execution in LS-DYNA, an explicit nonlinear transient dynamic code, for predicting the skid gear and occupant dynamic responses due to impact.

Measurement of Impulsive Thrust from a Closed Radio Frequency Cavity in Vacuum

NASA Technical Reports Server (NTRS)

White, Harold; March, Paul; Lawrence, James; Vera, Jerry; Sylvester, Andre; Brady, David; Bailey, Paul

2016-01-01

A vacuum test campaign evaluating the impulsive thrust performance of a tapered RF test article excited in the TM212 mode at 1,937 megahertz (MHz) has been completed. The test campaign consisted of a forward thrust phase and reverse thrust phase at less than 8 x 10(exp -6) Torr vacuum with power scans at 40 watts, 60 watts, and 80 watts. The test campaign included a null thrust test effort to identify any mundane sources of impulsive thrust, however none were identified. Thrust data from forward, reverse, and null suggests that the system is consistently performing with a thrust to power ratio of 1.2 +/- 0.1 mN/kW.

Investigating the Effectiveness of a POE-Based Teaching Activity on Students' Understanding of Condensation

ERIC Educational Resources Information Center

Costu, Bayram; Ayas, Alipasa; Niaz, Mansoor

2012-01-01

This article reports on the development of a Predict-Observe-Explain, POE-based teaching strategy to facilitate conceptual change and its effectiveness on student understanding of condensation. The sample consisted of 52 first-year students in primary science education department. Students' ideas were elicited using a test consisting of five probe…

The oil pressure test of the hydraulic impeller blade

NASA Astrophysics Data System (ADS)

Ye, Wen-bo; Jia, Li-tao

2017-12-01

This article introduced the structure of the Kaplan runner in hydropower station and the operating process of the oil pressure test has been described. What’s more, the whole process, including filling oil to the runner hub, the movement of the runner blade, the oil circuit, have been presented in detail.Since the manipulation of the oil circuit which controlled by three Valve groups consisting of six valves was complicated, the author is planning to replace them with 3-position 3-way electromagnetic valves, so we can simplify the operation procedure.The author hopes this article can provide technical reference for the oil pressure test.

Test Review: Review of Kaufman Brief Intelligence Test, Second Edition: Kaufman, A. S., & Kaufman, N. L. (2004). "Kaufman Brief Intelligence Test, Second Edition". Bloomington, MN: Pearson, Inc.

ERIC Educational Resources Information Center

Bain, Sherry K.; Jaspers, Kathryn E.

2010-01-01

This article presents a review of the Kaufman Brief Intelligence Test, Second Edition (KBIT-2; Kaufman & Kaufman, 2004b), which is designed to provide a brief, individualized format for measuring verbal and nonverbal intelligence in children and adults from the ages of 4 years, 0 months through 90 years, 11 months. The test consists of only…

Processes and Procedures for Estimating Score Reliability and Precision

ERIC Educational Resources Information Center

Bardhoshi, Gerta; Erford, Bradley T.

2017-01-01

Precision is a key facet of test development, with score reliability determined primarily according to the types of error one wants to approximate and demonstrate. This article identifies and discusses several primary forms of reliability estimation: internal consistency (i.e., split-half, KR-20, a), test-retest, alternate forms, interscorer, and…

Components of Spatial Thinking: Evidence from a Spatial Thinking Ability Test

ERIC Educational Resources Information Center

Lee, Jongwon; Bednarz, Robert

2012-01-01

This article introduces the development and validation of the spatial thinking ability test (STAT). The STAT consists of sixteen multiple-choice questions of eight types. The STAT was validated by administering it to a sample of 532 junior high, high school, and university students. Factor analysis using principal components extraction was applied…

The Textevaluator Tool: Helping Teachers and Test Developers Select Texts for Use in Instruction and Assessment

ERIC Educational Resources Information Center

Sheehan, Kathleen M.; Kostin, Irene; Napolitano, Diane; Flor, Michael

2014-01-01

This article describes TextEvaluator, a comprehensive text-analysis system designed to help teachers, textbook publishers, test developers, and literacy researchers select reading materials that are consistent with the text complexity goals outlined in the Common Core State Standards. Three particular aspects of the TextEvaluator measurement…

The Adult Reading History Questionnaire (ARHQ) in Icelandic: Psychometric Properties and Factor Structure

ERIC Educational Resources Information Center

Bjornsdottir, Gyda; Halldorsson, Jonas G.; Steinberg, Stacy; Hansdottir, Ingunn; Kristjansson, Kristleifur; Stefansson, Hreinn; Stefansson, Kari

2014-01-01

This article describes psychometric testing of an Icelandic adaptation of the "Adult Reading History Questionnaire" (ARHQ), designed to detect a history of reading difficulties indicative of dyslexia. Tested in a large and diverse sample of 2,187 adults, the Icelandic adaptation demonstrated internal consistency reliability (Cronbach's…

GED Items. The Newsletter of the GED Testing Service, 1998.

ERIC Educational Resources Information Center

American Council on Education, Washington, DC. General Educational Development Testing Service.

This document consists of the five issues of the newsletter of the General Educational Development (GED) Testing Service: January/February, March/April, May/June, September/October, and November/December. Each issue contains information of interest to users of the GED examinations. The feature article for the January/February issue is "Next…

Predicting Item Difficulty in a Reading Comprehension Test with an Artificial Neural Network.

ERIC Educational Resources Information Center

Perkins, Kyle; And Others

1995-01-01

This article reports the results of using a three-layer back propagation artificial neural network to predict item difficulty in a reading comprehension test. Three classes of variables were examined: text structure, propositional analysis, and cognitive demand. Results demonstrate that the networks can consistently predict item difficulty. (JL)

Assessing the Accuracy and Consistency of Language Proficiency Classification under Competing Measurement Models

ERIC Educational Resources Information Center

Zhang, Bo

2010-01-01

This article investigates how measurement models and statistical procedures can be applied to estimate the accuracy of proficiency classification in language testing. The paper starts with a concise introduction of four measurement models: the classical test theory (CTT) model, the dichotomous item response theory (IRT) model, the testlet response…

A Poor Harvest: North Carolina's Rural Schools. A Reprint of Articles Published in The Raleigh News and Observer, March 26-28, 1989.

ERIC Educational Resources Information Center

Graves, Bill; Bolch, Judy

This series of newspaper articles evaluates North Carolina's schools and establishes a relationship between the state's rural poverty and low student achievement levels. Test scores in 1988 are consistently low in all but four of the poorest rural counties. Small schools are disappearing from rural areas. Large schools can offer students more…

CFD Simulations of the IHF Arc-Jet Flow: Compression-Pad Separation Bolt Wedge Tests

NASA Technical Reports Server (NTRS)

Gokcen, Tahir; Skokova, Kristina A.

2017-01-01

This paper reports computational analyses in support of two wedge tests in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using two different wedge models, each placed in a free jet downstream of a corresponding different conical nozzle in the Ames 60-MW Interaction Heating Facility. Each panel test article included a metallic separation bolt imbedded in Orion compression-pad and heatshield materials, resulting in a circular protuberance over a flat plate. The protuberances produce complex model flowfields, containing shock-shock and shock-boundary layer interactions, and multiple augmented heating regions on the test plate. As part of the test calibration runs, surface pressure and heat flux measurements on water-cooled calibration plates integrated with the wedge models were also obtained. Surface heating distributions on the test articles as well as arc-jet test environment parameters for each test configuration are obtained through computational fluid dynamics simulations, consistent with the facility and calibration measurements. The present analysis comprises simulations of the non-equilibrium flow field in the facility nozzle, test box, and flow field over test articles, and comparisons with the measured calibration data.

CFD Simulations of the IHF Arc-Jet Flow: Compression-Pad/Separation Bolt Wedge Tests

NASA Technical Reports Server (NTRS)

Goekcen, Tahir; Skokova, Kristina A.

2017-01-01

This paper reports computational analyses in support of two wedge tests in a high enthalpy arc-jet facility at NASA Ames Research Center. These tests were conducted using two different wedge models, each placed in a free jet downstream of a corresponding different conical nozzle in the Ames 60-MW Interaction Heating Facility. Each panel test article included a metallic separation bolt imbedded in Orion compression-pad and heatshield materials, resulting in a circular protuberance over a flat plate. The protuberances produce complex model flowfields, containing shock-shock and shock-boundary layer interactions, and multiple augmented heating regions on the test plate. As part of the test calibration runs, surface pressure and heat flux measurements on water-cooled calibration plates integrated with the wedge models were also obtained. Surface heating distributions on the test articles as well as arc-jet test environment parameters for each test configuration are obtained through computational fluid dynamics simulations, consistent with the facility and calibration measurements. The present analysis comprises simulations of the nonequilibrium flowfield in the facility nozzle, test box, and flowfield over test articles, and comparisons with the measured calibration data.

BMI Sandwich Wing Box Analysis and Test

NASA Technical Reports Server (NTRS)

Palm, Tod; Mahler, Mary; Shah, Chandu; Rouse, Marshall; Bush, Harold; Wu, Chauncey; Small, William J.

2000-01-01

A composite sandwich single bay wing box test article was developed by Northrop Grumman and tested recently at NASA Langley Research Center. The objectives for the wing box development effort were to provide a demonstration article for manufacturing scale up of structural concepts related to a high speed transport wing, and to validate the structural performance of the design. The box concept consisted of highly loaded composite sandwich wing skins, with moderately loaded composite sandwich spars. The dimensions of the box were chosen to represent a single bay of the main wing box, with a spar spacing of 30 inches, height of 20 inches constant depth, and length of 64 inches. The bismaleimide facesheet laminates and titanium honeycomb core chosen for this task are high temperature materials able to sustain a 300F service temperature. The completed test article is shown in Figure 1. The tests at NASA Langley demonstrated the structures ability to sustain axial tension and compression loads in excess of 20,000 lb/in, and to maintain integrity in the thermal environment. Test procedures, analysis failure predictions, and test results are presented.

Evaluation of cross-cultural adaptation and measurement properties of breast cancer-specific quality-of-life questionnaires: a systematic review.

PubMed

Oliveira, Indiara Soares; da Cunha Menezes Costa, Lucíola; Fagundes, Felipe Ribeiro Cabral; Cabral, Cristina Maria Nunes

2015-05-01

To assess the procedures of translation, cross-cultural adaptation, and measurement properties of breast cancer-specific quality-of-life questionnaires. Searches were conducted in the databases MEDLINE, EMBASE, CINAHL, and SciELO using the keywords: "Questionnaires," "Quality of life," and "Breast cancer." The studies were analyzed in terms of methodological quality according to the guidelines for the procedure of cross-cultural adaptation and the quality criteria for measurement properties of questionnaires. We found 24 eligible studies. Most of the articles assessed the translation and measurement properties of the instrument EORTC QLQ-BR23. Description about translation and cross-cultural adaptation was incomplete in 11 studies. Translation and back translation were the most tested phases, and synthesis of the translation was the most omitted phase in the articles. Information on assessing measurement properties was provided incompletely in 23 articles. Internal consistency was the most tested property in all of the eligible articles, but none of them provided information on agreement. Construct validity was adequately tested in only three studies that used the FACT-B and QLQ-BR23. Eight articles provided information on reliability; however, only four found positive classification. Responsiveness was tested in four articles, and ceiling and floor effects were tested in only three articles. None of the instruments showed fully adequate quality. There is limited evidence on cross-cultural adaptations and measurement properties; therefore, it is recommended that caution be exercised when using breast cancer-specific quality-of-life questionnaires that have been translated, adapted, and tested.

Transient Pressure Test Article (TPTA) 1.1 and 1.1A, volume 1

NASA Technical Reports Server (NTRS)

Rebells, Clarence A.

1988-01-01

This final test report presents the results obtained during the static hot firing and cold-gas high Q tests of the first Transient Pressure Test Article (TPTA) 1.1. The TPTA consisted of field test joints A and B, which were the original RSRM J-insulation configuration, with a metal capture feature. It also consisted of a flight configuration nozzle-to-case test joint (Joint D) with shorter vent slots. Fluorocarbon O-rings were used in all the test joints. The purpose of the TPTA tests is to evaluate and characterize the RSMR field and nozzle-to-case joints under the influence of ignition and strut loads during liftoff anf high Q. All objectives of the cold-gas high Q (TPTA 1.1A) test were met and all measurements were close to predicted values. During the static hot-firing test (TPTA 1.1), the motor was inadvertently plugged by the quench injector plug, making it a more severe test, although no strut loads were applied. The motor was depressurized after approximately 11 min using an auxiliary system, and no anomalies were noted. In the static hot-firing test, pressure was incident on the insulation and the test joint gaps were within the predicted range. During the static hot-firing test, no strut loads were applied because the loading system malfunctioned. For this test, all measurements were within range of similar tests performed without strut loads.

Ground-based testing of the dynamics of flexible space structures using band mechanisms

NASA Technical Reports Server (NTRS)

Yang, L. F.; Chew, Meng-Sang

1991-01-01

A suspension system based on a band mechanism is studied to provide the free-free conditions for ground based validation testing of flexible space structures. The band mechanism consists of a noncircular disk with a convex profile, preloaded by torsional springs at its center of rotation so that static equilibrium of the test structure is maintained at any vertical location; the gravitational force will be directly counteracted during dynamic testing of the space structure. This noncircular disk within the suspension system can be configured to remain unchanged for test articles with the different weights as long as the torsional spring is replaced to maintain the originally designed frequency ratio of W/k sub s. Simulations of test articles which are modeled as lumped parameter as well as continuous parameter systems, are also presented.

ME science as mobile learning based on virtual reality

NASA Astrophysics Data System (ADS)

Fradika, H. D.; Surjono, H. D.

2018-04-01

The purpose of this article described about ME Science (Mobile Education Science) as mobile learning application learning of Fisika Inti. ME Science is a product of research and development (R&D) that was using Alessi and Trollip model. Alessi and Trollip model consists three stages that are: (a) planning include analysis of problems, goals, need, and idea of development product, (b) designing includes collecting of materials, designing of material content, creating of story board, evaluating and review product, (c) developing includes development of product, alpha testing, revision of product, validation of product, beta testing, and evaluation of product. The article describes ME Science only to development of product which include development stages. The result of development product has been generates mobile learning application based on virtual reality that can be run on android-based smartphone. These application consist a brief description of learning material, quizzes, video of material summery, and learning material based on virtual reality.

Cryogenic Fluid Film Bearing Tester Development Study

NASA Technical Reports Server (NTRS)

Scharrer, Joseph K. (Editor); Murphy, Brian T.; Hawkins, Lawrence A.

1993-01-01

Conceptual designs were developed for the determination of rotordynamic coefficients of cryogenic fluid film bearings. The designs encompassed the use of magnetic and conventional excitation sources as well as the use of magnetic bearings as support bearings. Test article configurations reviewed included overhung, floating housing, and fixed housing. Uncertainty and forced response analyses were performed to assess quality of data and suitability of each for testing a variety of fluid film bearing designs. Development cost and schedule estimates were developed for each design. Facility requirements were reviewed and compared with existing MSFC capability. The recommended configuration consisted of a fixed test article housing centrally located between two magnetic bearings. The magnetic bearings would also serve as the excitation source.

Using Automated Essay Scores as an Anchor When Equating Constructed Response Writing Tests

ERIC Educational Resources Information Center

Almond, Russell G.

2014-01-01

Assessments consisting of only a few extended constructed response items (essays) are not typically equated using anchor test designs as there are typically too few essay prompts in each form to allow for meaningful equating. This article explores the idea that output from an automated scoring program designed to measure writing fluency (a common…

14 CFR Appendix H to Part 25 - Instructions for Continued Airworthiness

Code of Federal Regulations, 2013 CFR

2013-01-01

..., approved under § 25.571. Until the full-scale fatigue testing is completed and the FAA has approved the LOV... accumulated on the fatigue test article. (b) If the Instructions for Continued Airworthiness consist of... identifying any changes to EWIS under § 25.1711. (5) Electrical load data and instructions for updating that...

14 CFR Appendix H to Part 25 - Instructions for Continued Airworthiness

Code of Federal Regulations, 2014 CFR

2014-01-01

..., approved under § 25.571. Until the full-scale fatigue testing is completed and the FAA has approved the LOV... accumulated on the fatigue test article. (b) If the Instructions for Continued Airworthiness consist of... identifying any changes to EWIS under § 25.1711. (5) Electrical load data and instructions for updating that...

14 CFR Appendix H to Part 25 - Instructions for Continued Airworthiness

Code of Federal Regulations, 2012 CFR

2012-01-01

..., approved under § 25.571. Until the full-scale fatigue testing is completed and the FAA has approved the LOV... accumulated on the fatigue test article. (b) If the Instructions for Continued Airworthiness consist of... identifying any changes to EWIS under § 25.1711. (5) Electrical load data and instructions for updating that...

HIV Testing and Counseling Among Female Sex Workers: A Systematic Literature Review.

PubMed

Tokar, Anna; Broerse, Jacqueline E W; Blanchard, James; Roura, Maria

2018-02-20

HIV testing uptake continues to be low among Female Sex Workers (FSWs). We synthesizes evidence on barriers and facilitators to HIV testing among FSW as well as frequencies of testing, willingness to test, and return rates to collect results. We systematically searched the MEDLINE/PubMed, EMBASE, SCOPUS databases for articles published in English between January 2000 and November 2017. Out of 5036 references screened, we retained 36 papers. The two barriers to HIV testing most commonly reported were financial and time costs-including low income, transportation costs, time constraints, and formal/informal payments-as well as the stigma and discrimination ascribed to HIV positive people and sex workers. Social support facilitated testing with consistently higher uptake amongst married FSWs and women who were encouraged to test by peers and managers. The consistent finding that social support facilitated HIV testing calls for its inclusion into current HIV testing strategies addressed at FSW.

Study samples are too small to produce sufficiently precise reliability coefficients.

PubMed

Charter, Richard A

2003-04-01

In a survey of journal articles, test manuals, and test critique books, the author found that a mean sample size (N) of 260 participants had been used for reliability studies on 742 tests. The distribution was skewed because the median sample size for the total sample was only 90. The median sample sizes for the internal consistency, retest, and interjudge reliabilities were 182, 64, and 36, respectively. The author presented sample size statistics for the various internal consistency methods and types of tests. In general, the author found that the sample sizes that were used in the internal consistency studies were too small to produce sufficiently precise reliability coefficients, which in turn could cause imprecise estimates of examinee true-score confidence intervals. The results also suggest that larger sample sizes have been used in the last decade compared with those that were used in earlier decades.

High Fidelity Simulations of Unsteady Flow through Turbopumps and Flowliners

NASA Technical Reports Server (NTRS)

Kiris, Cetin C.; Kwak, dochan; Chan, William; Housman, Jeff

2006-01-01

High fidelity computations were carried out to analyze the orbiter LH2 feedline flowliner. Computations were performed on the Columbia platform which is a 10,240-processor supercluster consisting of 20 Altix nodes with 512 processor each. Various computational models were used to characterize the unsteady flow features in the turbopump, including the orbiter Low-Pressure-Fuel-Turbopump (LPFTP) inducer, the orbiter manifold and a test article used to represent the manifold. Unsteady flow originating from the orbiter LPFTP inducer is one of the major contributors to the high frequency cyclic loading that results in high cycle fatigue damage to the gimbal flowliners just upstream of the LPFTP. The flow fields for the orbiter manifold and representative test article are computed and analyzed for similarities and differences. The incompressible Navier-Stokes flow solver INS3D, based on the artificial compressibility method, was used to compute the flow of liquid hydrogen in each test article.

The internal consistency of the standard gamble: tests after adjusting for prospect theory.

PubMed

Oliver, Adam

2003-07-01

This article reports a study that tests whether the internal consistency of the standard gamble can be improved upon by incorporating loss weighting and probability transformation parameters in the standard gamble valuation procedure. Five alternatives to the standard EU formulation are considered: (1) probability transformation within an EU framework; and, within a prospect theory framework, (2) loss weighting and full probability transformation, (3) no loss weighting and full probability transformation, (4) loss weighting and no probability transformation, and (5) loss weighting and partial probability transformation. Of the five alternatives, only the prospect theory formulation with loss weighting and no probability transformation offers an improvement in internal consistency over the standard EU valuation procedure.

An overview of coefficient alpha and a reliability matrix for estimating adequacy of internal consistency coefficients with psychological research measures.

PubMed

Ponterotto, Joseph G; Ruckdeschel, Daniel E

2007-12-01

The present article addresses issues in reliability assessment that are often neglected in psychological research such as acceptable levels of internal consistency for research purposes, factors affecting the magnitude of coefficient alpha (alpha), and considerations for interpreting alpha within the research context. A new reliability matrix anchored in classical test theory is introduced to help researchers judge adequacy of internal consistency coefficients with research measures. Guidelines and cautions in applying the matrix are provided.

Design of Ablation Test Device for Brick Coating of Gun

NASA Astrophysics Data System (ADS)

shirui, YAO; yongcai, CHEN; fei, WANG; jianxin, ZHAO

2018-03-01

As a result of the live ammunition test conditions, the barrel resistance of the barrel coating has high cost, time consuming, low efficiency and high test site requirements. This article designed a simple, convenient and efficient test device. Through the internal trajectory calculation by Matlab, the ablation environment produced by the ablation test device has achieved the expected effect, which is consistent with the working condition of the tube in the launching state, which can better reflect the ablation of the coating.

Stress Rupture Testing and Analysis of the NASA WSTF-JPL Carbon Overwrapped Pressure Vessels

NASA Technical Reports Server (NTRS)

Greene, Nathanael; Yoder, Tommy; Saulsberry, Regor; Grimes, Lorie; Thesken, John; Phoenix, Leigh

2007-01-01

Carbon composite overwrapped pressure vessels (COPVs) are widely used in applications from spacecraft to life support. COPV technology provides a pressurized media storage advantage over amorphous technology with weight savings on the order of 30 percent. The National Aeronautics and Space Administration (NASA) has been supporting the development of this technology since the early 1970's with an interest in safe application of these components to reduce mass to orbit. NASA White Sands Test Facility (WSTF) has been testing components in support of this objective since the 1980s and has been involved in test development and analysis to address affects of impact, propellant and cryogenic fluids exposure on Kevlar and carbon epoxy. The focus of this paper is to present results of a recent joint WSTF-Jet Propulsion Laboratories (JPL) effort to assess safe life of these components. The WSTF-JPL test articles consisted of an aluminum liner and a carbon fiber overwrap in an industry standard epoxy resin system. The vessels were specifically designed with one plus-minus helical wrap and one hoop wrap over the helical and they measured 4.23 x 11.4 in. long. 120 test articles were manufactured in August of 1998 of one lot fiber and resin and the 110 test articles were delivered to WSTF for test. Ten of the 120 test articles were burst tested at the manufacturer to establish the delivered fiber stress. Figure 1 shows a test article in a pre burst condition and with a hoop fiber failure (no leak of pressurized media) and post burst (failure of liner and loss of pressurized media).

Anomalous Thrust Production from an RF Test Device Measured on a Low-Thrust Torsion Pendulum

NASA Technical Reports Server (NTRS)

Brady, David; White, Harold G.; March, Paul; Lawrence, James T.; Davies, Frank J.

2014-01-01

This paper describes the eight-day August 2013 test campaign designed to investigate and demonstrate viability of using classical magnetoplasmadynamics to obtain a propulsive momentum transfer via the quantum vacuum virtual plasma. This paper will not address the physics of the quantum vacuum plasma thruster, but instead will describe the test integration, test operations, and the results obtained from the test campaign. Approximately 30-50 micro-Newtons of thrust were recorded from an electric propulsion test article consisting primarily of a radio frequency (RF) resonant cavity excited at approximately 935 megahertz. Testing was performed on a low-thrust torsion pendulum that is capable of detecting force at a single-digit micronewton level, within a stainless steel vacuum chamber with the door closed but at ambient atmospheric pressure. Several different test configurations were used, including two different test articles as well as a reversal of the test article orientation. In addition, the test article was replaced by an RF load to verify that the force was not being generated by effects not associated with the test article. The two test articles were designed by Cannae LLC of Doylestown, Pennsylvania. The torsion pendulum was designed, built, and operated by Eagleworks Laboratories at the NASA Johnson Space Center of Houston, Texas. Approximately six days of test integration were required, followed by two days of test operations, during which, technical issues were discovered and resolved. Integration of the two test articles and their supporting equipment was performed in an iterative fashion between the test bench and the vacuum chamber. In other words, the test article was tested on the bench, then moved to the chamber, then moved back as needed to resolve issues. Manual frequency control was required throughout the test. Thrust was observed on both test articles, even though one of the test articles was designed with the expectation that it would not produce thrust. Specifically, one test article contained internal physical modifications that were designed to produce thrust, while the other did not (with the latter being referred to as the "null" test article). Test data gathered includes torsion pendulum displacement measurements which are used to calculate generated force, still imagery in the visible spectrum to document the physical configuration, still imagery in the infrared spectrum to characterize the thermal environment, and video imagery. Post-test data includes static and animated graphics produced during RF resonant cavity characterization using the COMSOL Multiphysics® software application. Excerpts from all of the above are included and discussed in this paper. Lessons learned from test integration and operations include identification of the need to replace manual control of the resonant cavity target frequency with an automated frequency control capability. Future test plans include the development of an automatic frequency control circuit. Test results indicate that the RF resonant cavity thruster design, which is unique as an electric propulsion device, is producing a force that is not attributable to any classical electromagnetic phenomenon and therefore is potentially demonstrating an interaction with the quantum vacuum virtual plasma. Future test plans include independent verification and validation at other test facilities.

Infrared Imagery of Solid Rocket Exhaust Plumes

NASA Technical Reports Server (NTRS)

Moran, Robert P.; Houston, Janice D.

2011-01-01

The Ares I Scale Model Acoustic Test program consisted of a series of 18 solid rocket motor static firings, simulating the liftoff conditions of the Ares I five-segment Reusable Solid Rocket Motor Vehicle. Primary test objectives included acquiring acoustic and pressure data which will be used to validate analytical models for the prediction of Ares 1 liftoff acoustics and ignition overpressure environments. The test article consisted of a 5% scale Ares I vehicle and launch tower mounted on the Mobile Launch Pad. The testing also incorporated several Water Sound Suppression Systems. Infrared imagery was employed during the solid rocket testing to support the validation or improvement of analytical models, and identify corollaries between rocket plume size or shape and the accompanying measured level of noise suppression obtained by water sound suppression systems.

A Residual Mass Ballistic Testing Method to Compare Armor Materials or Components (Residual Mass Ballistic Testing Method)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benjamin Langhorst; Thomas M Lillo; Henry S Chu

2014-05-01

A statistics based ballistic test method is presented for use when comparing multiple groups of test articles of unknown relative ballistic perforation resistance. The method is intended to be more efficient than many traditional methods for research and development testing. To establish the validity of the method, it is employed in this study to compare test groups of known relative ballistic performance. Multiple groups of test articles were perforated using consistent projectiles and impact conditions. Test groups were made of rolled homogeneous armor (RHA) plates and differed in thickness. After perforation, each residual projectile was captured behind the target andmore » its mass was measured. The residual masses measured for each test group were analyzed to provide ballistic performance rankings with associated confidence levels. When compared to traditional V50 methods, the residual mass (RM) method was found to require fewer test events and be more tolerant of variations in impact conditions.« less

Alignment between the Science Curriculum and Assessment in Selected NY State Regents Exams

ERIC Educational Resources Information Center

Liu, Xiufeng; Fulmer, Gavin

2008-01-01

This article reports on an analysis of alignment between NY state core curricula and NY Regents tests in physics and chemistry. Both the curriculum and test were represented by a two dimensional table consisting of topics and cognitive demands. The cell values of the table were numbers of major understandings in the curriculum and points of test…

Experimental Study of the Compression Response of Fluted-Core Composite Panels with Joints

NASA Technical Reports Server (NTRS)

Schultz, Marc R.; Rose, Cheryl A.; Guzman, J. Carlos; McCarville, Douglas; Hilburger, Mark W.

2012-01-01

Fluted-core sandwich composites consist of integral angled web members spaced between laminate face sheets, and may have the potential to provide benefits over traditional sandwich composites for certain aerospace applications. However, fabrication of large autoclave-cured fluted-core cylindrical shells with existing autoclaves will require that the shells be fabricated in segments, and joined longitudinally to form a complete barrel. Two different longitudinal fluted-core joint designs were considered experimentally in this study. In particular, jointed fluted-core-composite panels were tested in longitudinal compression because longitudinal compression is the primary loading condition in dry launch-vehicle barrel sections. One of the joint designs performed well in comparison with unjointed test articles, and the other joint design failed at loads approximately 14% lower than unjointed test articles. The compression-after-impact (CAI) performance of jointed fluted-core composites was also investigated by testing test articles that had been subjected to 6 ft-lb impacts. It was found that such impacts reduced the load-carrying capability by 9% to 40%. This reduction is dependent on the joint concept, component flute size, and facesheet thickness.

The middeck 0-gravity dynamics experiment

NASA Technical Reports Server (NTRS)

Crawley, Edward F.; Vanschoor, Marthinus C.; Bokhour, Edward B.

1993-01-01

The Middeck 0-Gravity Dynamics Experiment (MODE), flown onboard the Shuttle STS-48 Mission, consists of three major elements: the Experiment Support Module, a dynamics test bed providing computer experiment control, analog signal conditioning, power conditioning, an operator interface consisting of a keypad and display, experiment electrical and thermal control, and archival data storage: the Fluid Test Article assembly, used to investigate the dynamics of fluid-structure interaction in 0-gravity; and the Structural Test Article for investigating the open-loop dynamics of structures in 0-gravity. Deployable, erectable, and rotary modules were assembled to form three one- and two-dimensional structures, in which variations in bracing wire and rotary joint preload could be introduced. Change in linear modal parameters as well as the change in nonlinear nature of the response is examined. Trends in modal parameters are presented as a function of force amplitude, joint preload, and ambient gravity. An experimental study of the lateral slosh behavior of contained fluids is also presented. A comparison of the measured earth and space results identifies and highlights the effects of gravity on the linear and nonlinear slosh behavior of these fluids.

Dialysis search filters for PubMed, Ovid MEDLINE, and Embase databases.

PubMed

Iansavichus, Arthur V; Haynes, R Brian; Lee, Christopher W C; Wilczynski, Nancy L; McKibbon, Ann; Shariff, Salimah Z; Blake, Peter G; Lindsay, Robert M; Garg, Amit X

2012-10-01

Physicians frequently search bibliographic databases, such as MEDLINE via PubMed, for best evidence for patient care. The objective of this study was to develop and test search filters to help physicians efficiently retrieve literature related to dialysis (hemodialysis or peritoneal dialysis) from all other articles indexed in PubMed, Ovid MEDLINE, and Embase. A diagnostic test assessment framework was used to develop and test robust dialysis filters. The reference standard was a manual review of the full texts of 22,992 articles from 39 journals to determine whether each article contained dialysis information. Next, 1,623,728 unique search filters were developed, and their ability to retrieve relevant articles was evaluated. The high-performance dialysis filters consisted of up to 65 search terms in combination. These terms included the words "dialy" (truncated), "uremic," "catheters," and "renal transplant wait list." These filters reached peak sensitivities of 98.6% and specificities of 98.5%. The filters' performance remained robust in an independent validation subset of articles. These empirically derived and validated high-performance search filters should enable physicians to effectively retrieve dialysis information from PubMed, Ovid MEDLINE, and Embase.

Finite Element Analysis and Test Correlation of a 10-Meter Inflation-Deployed Solar Sail

NASA Technical Reports Server (NTRS)

Sleight, David W.; Michii, Yuki; Lichodziejewski, David; Derbes, Billy; Mann. Troy O.; Slade, Kara N.; Wang, John T.

2005-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA's future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive phased test plan is currently being implemented to advance the technology readiness level of the solar sail design. These tests consist of solar sail component, subsystem, and sub-scale system ground tests that simulate the vacuum and thermal conditions of the space environment. Recently, two solar sail test articles, a 7.4-m beam assembly subsystem test article and a 10-m four-quadrant solar sail system test article, were tested in vacuum conditions with a gravity-offload system to mitigate the effects of gravity. This paper presents the structural analyses simulating the ground tests and the correlation of the analyses with the test results. For programmatic risk reduction, a two-prong analysis approach was undertaken in which two separate teams independently developed computational models of the solar sail test articles using the finite element analysis software packages: NEiNastran and ABAQUS. This paper compares the pre-test and post-test analysis predictions from both software packages with the test data including load-deflection curves from static load tests, and vibration frequencies and mode shapes from vibration tests. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were uncertainties in the material properties, test conditions, and modeling assumptions used in the analyses.

Structural Analysis of an Inflation-Deployed Solar Sail With Experimental Validation

NASA Technical Reports Server (NTRS)

Sleight, David W.; Michii, Yuki; Lichodziejewski, David; Derbes, Billy; Mann, Troy O.

2005-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive phased test plan is currently being implemented to advance the technology readiness level of the solar sail design. These tests consist of solar sail component, subsystem, and sub-scale system ground tests that simulate the vacuum and thermal conditions of the space environment. Recently, two solar sail test articles, a 7.4-m beam assembly subsystem test article and a 10-m four-quadrant solar sail system test article, were tested in vacuum conditions with a gravity-offload system to mitigate the effects of gravity. This paper presents the structural analyses simulating the ground tests and the correlation of the analyses with the test results. For programmatic risk reduction, a two-prong analysis approach was undertaken in which two separate teams independently developed computational models of the solar sail test articles using the finite element analysis software packages: NEiNastran and ABAQUS. This paper compares the pre-test and post-test analysis predictions from both software packages with the test data including load-deflection curves from static load tests, and vibration frequencies and mode shapes from structural dynamics tests. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were uncertainties in the material properties, test conditions, and modeling assumptions used in the analyses.

Technical Note: A Feasibility Study of Using the Flat Panel Detector on Linac for the kV X-ray Generator Test.

PubMed

Cai, Bin; Dolly, Steven; Kamal, Gregory; Yaddanapudi, Sridhar; Sun, Baozhou; Goddu, S Murty; Mutic, Sasa; Li, Hua

2018-04-28

To investigate the feasibility of using kV flat panel detector on linac for consistency evaluations of kV X-ray generator performance. An in-house designed aluminum (Al) array phantom with six 9×9 cm 2 square regions having various thickness was proposed and used in this study. Through XML script-driven image acquisition, kV images with various acquisition settings were obtained using the kV flat panel detector. Utilizing pre-established baseline curves, the consistency of X-ray tube output characteristics including tube voltage accuracy, exposure accuracy and exposure linearity were assessed through image quality assessment metrics including ROI mean intensity, ROI standard deviation (SD) and noise power spectrums (NPS). The robustness of this method was tested on two linacs for a three-month period. With the proposed method, tube voltage accuracy can be verified through conscience check with a 2% tolerance and 2 kVp intervals for forty different kVp settings. The exposure accuracy can be tested with a 4% consistency tolerance for three mAs settings over forty kVp settings. The exposure linearity tested with three mAs settings achieved a coefficient of variation (CV) of 0.1. We proposed a novel approach that uses the kV flat panel detector available on linac for X-ray generator test. This approach eliminates the inefficiencies and variability associated with using third party QA detectors while enabling an automated process. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Systems tunnel linear shaped charge lightning strike

NASA Technical Reports Server (NTRS)

Cook, M.

1989-01-01

Simulated lightning strike testing of the systems tunnel linear shaped charge (LSC) was performed at the Thiokol Lightning Test Complex in Wendover, Utah, on 23 Jun. 1989. The test article consisted of a 160-in. section of the LSC enclosed within a section of the systems tunnel. The systems tunnel was bonded to a section of a solid rocket motor case. All test article components were full scale. The systems tunnel cover of the test article was subjected to three discharges (each discharge was over a different grounding strap) from the high-current generator. The LSC did not detonate. All three grounding straps debonded and violently struck the LSC through the openings in the systems tunnel floor plates. The LSC copper surface was discolored around the areas of grounding strap impact, and arcing occurred at the LSC clamps and LSC ends. This test verified that the present flight configuration of the redesigned solid rocket motor systems tunnel, when subjected to simulated lightning strikes with peak current levels within 71 percent of the worst-case lightning strike condition of NSTS-07636, is adequate to prevent LSC ignition. It is therefore recommended that the design remain unchanged.

Consistent Structural Integrity and Efficient Certification with Analysis. Volume 2: Detailed Report on Innovative Research Developed, Applied, and Commercially Available

DTIC Science & Technology

2005-05-01

RESULTS ................................................................................................................49 5.3.1 Phase I Test Data...Ins 3 2.2a Wrinkling failure test article 7 2.2b Test results for a) Set A “0° core”, and b) Set B “90° core” 7 2.2c Test ... results for c) Set E “Isotropic (Foam) Core” 8 2.3 P = T because test data not yet reanalyzed with established CFs 9 2.4 P and T are now different

[Statistical validity of the Mexican Food Security Scale and the Latin American and Caribbean Food Security Scale].

PubMed

Villagómez-Ornelas, Paloma; Hernández-López, Pedro; Carrasco-Enríquez, Brenda; Barrios-Sánchez, Karina; Pérez-Escamilla, Rafael; Melgar-Quiñónez, Hugo

2014-01-01

This article validates the statistical consistency of two food security scales: the Mexican Food Security Scale (EMSA) and the Latin American and Caribbean Food Security Scale (ELCSA). Validity tests were conducted in order to verify that both scales were consistent instruments, conformed by independent, properly calibrated and adequately sorted items, arranged in a continuum of severity. The following tests were developed: sorting of items; Cronbach's alpha analysis; parallelism of prevalence curves; Rasch models; sensitivity analysis through mean differences' hypothesis test. The tests showed that both scales meet the required attributes and are robust statistical instruments for food security measurement. This is relevant given that the lack of access to food indicator, included in multidimensional poverty measurement in Mexico, is calculated with EMSA.

Comparative Effects of Concept Mapping and Cooperative Learning Strategies on Senior Secondary School Students' Achievement in Mathematics-Trigonometry in Kano State, Nigeria

ERIC Educational Resources Information Center

Bot, Thomas D.; Eze, John E.

2016-01-01

This article presents the findings from an experimental study on the effectiveness of concept mapping and cooperative learning strategies on SSII students' achievement in trigonometry in mathematics. The research design used in conducting the study was quasi-experimental pre-test and post-test non-equivalent control group. The sample consisted of…

Test for Chemical Induction of Chromosome Aberrations in Cultured Chinese Hamster (CHO) Cells With and Without Metabolic Activation. Test Article. Diethylene triamine trinitrate (DETN)

DTIC Science & Technology

2010-02-25

metabolic activation mixture was prepared by SITEK Research Laboratories and it consisted of phenobarbital -S,6-Benzoflavone (phenobarbitallB-naphthoflavone... Phenobarbital -S,6-Benzoflavone <-70°C May 21, 2011 Detailed infonnation about the S-9 batch used in the Assay is provided in Appendix N. 13 SITEK Study No

Development and Overview of CPAS Sasquatch Airdrop Landing Location Predictor Software

NASA Technical Reports Server (NTRS)

Bledsoe, Kristin J.; Bernatovich, Michael A.

2015-01-01

The Capsule Parachute Assembly System (CPAS) is the parachute system for NASA's Orion spacecraft. CPAS is currently in the Engineering Development Unit (EDU) phase of testing. The test program consists of numerous drop tests, wherein a test article rigged with parachutes is extracted from an aircraft. During such tests, range safety is paramount, as is the recoverability of the parachutes and test article. It is crucial to establish a release point from the aircraft that will ensure that the article and all items released from it during flight will land in a designated safe area. The Sasquatch footprint tool was developed to determine this safe release point and to predict the probable landing locations (footprints) of the payload and all released objects. In 2012, a new version of Sasquatch, called Sasquatch Polygons, was developed that significantly upgraded the capabilities of the footprint tool. Key improvements were an increase in the accuracy of the predictions, and the addition of an interface with the Debris Tool (DT), an in-flight debris avoidance tool for use on the test observation helicopter. Additional enhancements include improved data presentation for communication with test personnel and a streamlined code structure. This paper discusses the development, validation, and performance of Sasquatch Polygons, as well as its differences from the original Sasquatch footprint tool.

A proposal to standardize reporting units for fecal immunochemical tests for hemoglobin.

PubMed

Fraser, Callum G; Allison, James E; Halloran, Stephen P; Young, Graeme P

2012-06-06

Fecal immunochemical tests for hemoglobin are replacing traditional guaiac fecal occult blood tests in population screening programs for many reasons. However, the many available fecal immunochemical test devices use a range of sampling methods, differ with regard to hemoglobin stability, and report hemoglobin concentrations in different ways. The methods for sampling, the mass of feces collected, and the volume and characteristics of the buffer used in the sampling device also vary among fecal immunochemical tests, making comparisons of test performance characteristics difficult. Fecal immunochemical test results may be expressed as the hemoglobin concentration in the sampling device buffer and, sometimes, albeit rarely, as the hemoglobin concentration per mass of feces. The current lack of consistency in units for reporting hemoglobin concentration is particularly problematic because apparently similar hemoglobin concentrations obtained with different devices can lead to very different clinical interpretations. Consistent adoption of an internationally accepted method for reporting results would facilitate comparisons of outcomes from these tests. We propose a simple strategy for reporting fecal hemoglobin concentration that will facilitate the comparison of results between fecal immunochemical test devices and across clinical studies. Such reporting is readily achieved by defining the mass of feces sampled and the volume of sample buffer (with confidence intervals) and expressing results as micrograms of hemoglobin per gram of feces. We propose that manufacturers of fecal immunochemical tests provide this information and that the authors of research articles, guidelines, and policy articles, as well as pathology services and regulatory bodies, adopt this metric when reporting fecal immunochemical test results.

Pearson's chi-square test and rank correlation inferences for clustered data.

PubMed

Shih, Joanna H; Fay, Michael P

2017-09-01

Pearson's chi-square test has been widely used in testing for association between two categorical responses. Spearman rank correlation and Kendall's tau are often used for measuring and testing association between two continuous or ordered categorical responses. However, the established statistical properties of these tests are only valid when each pair of responses are independent, where each sampling unit has only one pair of responses. When each sampling unit consists of a cluster of paired responses, the assumption of independent pairs is violated. In this article, we apply the within-cluster resampling technique to U-statistics to form new tests and rank-based correlation estimators for possibly tied clustered data. We develop large sample properties of the new proposed tests and estimators and evaluate their performance by simulations. The proposed methods are applied to a data set collected from a PET/CT imaging study for illustration. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Ares I-X Launch Vehicle Modal Test Measurements and Data Quality Assessments

NASA Technical Reports Server (NTRS)

Templeton, Justin D.; Buehrle, Ralph D.; Gaspar, James L.; Parks, Russell A.; Lazor, Daniel R.

2010-01-01

The Ares I-X modal test program consisted of three modal tests conducted at the Vehicle Assembly Building at NASA s Kennedy Space Center. The first test was performed on the 71-foot 53,000-pound top segment of the Ares I-X launch vehicle known as Super Stack 5 and the second test was performed on the 66-foot 146,000- pound middle segment known as Super Stack 1. For these tests, two 250 lb-peak electro-dynamic shakers were used to excite bending and shell modes with the test articles resting on the floor. The third modal test was performed on the 327-foot 1,800,000-pound Ares I-X launch vehicle mounted to the Mobile Launcher Platform. The excitation for this test consisted of four 1000+ lb-peak hydraulic shakers arranged to excite the vehicle s cantilevered bending modes. Because the frequencies of interest for these modal tests ranged from 0.02 to 30 Hz, high sensitivity capacitive accelerometers were used. Excitation techniques included impact, burst random, pure random, and force controlled sine sweep. This paper provides the test details for the companion papers covering the Ares I-X finite element model calibration process. Topics to be discussed include test setups, procedures, measurements, data quality assessments, and consistency of modal parameter estimates.

TEANGA: Journal of the Irish Association for Applied Linguistics, 1979-1993.

ERIC Educational Resources Information Center

O'Baoill, Donall P., Ed.

1993-01-01

This document consists of a complete run of the thirteen issues of "TEANGA" published since its inception in 1979 through 1993. Typical article topics include: linguistic research approaches and methodology; interlanguage, language transfer, and interference; second language instruction; language testing; language variation; discussion…

The Geant4 physics validation repository

NASA Astrophysics Data System (ADS)

Wenzel, H.; Yarba, J.; Dotti, A.

2015-12-01

The Geant4 collaboration regularly performs validation and regression tests. The results are stored in a central repository and can be easily accessed via a web application. In this article we describe the Geant4 physics validation repository which consists of a relational database storing experimental data and Geant4 test results, a java API and a web application. The functionality of these components and the technology choices we made are also described.

A Closer Look at Manipulatives in Remediation

ERIC Educational Resources Information Center

Peppers, Denise S.; Wan, Anna; Phillips, Hope E.

2014-01-01

In this article, one teacher describes her action research with eighth-grade prealgebra students who are working on a conceptual understanding of fractions. Examining her middle school students' standardized test scores for the previous five years, Denise S. Peppers discovered that student performance on fractions was consistently the lowest…

Development and Initial Psychometrics of the Counselor Burnout Inventory

ERIC Educational Resources Information Center

Lee, Sang Min; Baker, Crystal R.; Cho, Seong Ho; Heckathorn, Danette E.; Holland, Michael W.; Newgent, Rebecca A.; Ogle, Nick T.; Powell, Michael L.; Quinn, James J.; Wallace, Sam L.; Yu, Kumlan

2007-01-01

This article describes the development and psychometric properties of the Counselor Burnout Inventory (CBI), which is designed to meet the needs of the counseling profession by assessing burnout in counselors. Factor structure, concurrent validity, internal consistency, and test-retest reliability of the CBI scores are reported. Implications for…

Reliability Generalization of Scores on the Spielberger State-Trait Anxiety Inventory.

ERIC Educational Resources Information Center

Barnes, Laura L. B.; Harp, Diane; Jung, Woo Sik

2002-01-01

Conducted a reliability generalization study for the State-Trait Anxiety Inventory (C. Spielberger, 1983) by reviewing and classifying 816 research articles. Average reliability coefficients were acceptable for both internal consistency and test-retest reliability, but variation was present among the estimates. Other differences are discussed.…

Reexamining Our Approach to College Access

ERIC Educational Resources Information Center

Pérez, Angel B.

2017-01-01

In this article Trinity College vice president for enrollment and student success, Angel Pérez addresses the nation's inability to offer consistent college preparation, academic rigor and counseling across varying socioeconomic communities. Research has highlighted the fact that standardized tests do more to keep low-income students out of top…

Initial Operation of the Nuclear Thermal Rocket Element Environmental Simulator

NASA Technical Reports Server (NTRS)

Emrich, William J., Jr.; Pearson, J. Boise; Schoenfeld, Michael P.

2015-01-01

The Nuclear Thermal Rocket Element Environmental Simulator (NTREES) facility is designed to perform realistic non-nuclear testing of nuclear thermal rocket (NTR) fuel elements and fuel materials. Although the NTREES facility cannot mimic the neutron and gamma environment of an operating NTR, it can simulate the thermal hydraulic environment within an NTR fuel element to provide critical information on material performance and compatibility. The NTREES facility has recently been upgraded such that the power capabilities of the facility have been increased significantly. At its present 1.2 MW power level, more prototypical fuel element temperatures nay now be reached. The new 1.2 MW induction heater consists of three physical units consisting of a transformer, rectifier, and inverter. This multiunit arrangement facilitated increasing the flexibility of the induction heater by more easily allowing variable frequency operation. Frequency ranges between 20 and 60 kHz can accommodated in the new induction heater allowing more representative power distributions to be generated within the test elements. The water cooling system was also upgraded to so as to be capable of removing 100% of the heat generated during testing In this new higher power configuration, NTREES will be capable of testing fuel elements and fuel materials at near-prototypic power densities. As checkout testing progressed and as higher power levels were achieved, several design deficiencies were discovered and fixed. Most of these design deficiencies were related to stray RF energy causing various components to encounter unexpected heating. Copper shielding around these components largely eliminated these problems. Other problems encountered involved unexpected movement in the coil due to electromagnetic forces and electrical arcing between the coil and a dummy test article. The coil movement and arcing which were encountered during the checkout testing effectively destroyed the induction coil in use at the time and resulted in NTREES being out of commission for a couple of months while a new stronger coil was procured. The new coil includes several additional pieces of support structure to prevent coil movement in the future. In addition, new insulating test article support components have been fabricated to prevent unexpected arcing to the test articles. Additional activities are also now underway to address ways in which the radial temperature profiles across test articles may be controlled such that they are more prototypical of what they would encounter in an operating nuclear engine. The causes of the temperature distribution problem are twofold. First, the fuel element test article is isolated in NTREES as opposed to being in the midst of many other mostly identical fuel elements in a nuclear engine. As a result, the fuel element heat flux boundary conditions in NTREES are far from adiabatic as would normally be the case in a reactor. Second, induction heating skews the power distribution such that power is preferentially deposited near the outside of the fuel element. Nuclear heating, conversely, deposits its power much more uniformly throughout the fuel element. Current studies are now looking at various schemes to adjust the amount of thermal radiation emitted from the fuel element surface so as to essentially vary the thermal boundary conditions on the test article. It is hoped that by properly adjusting the thermal boundary conditions on the fuel element test article, it may be possible to substantially correct for the inappropriate radial power distributions resulting from the induction heating so as to yield a more nearly correct temperature distribution throughout the fuel element.

Data Sharing Effect on Article Citation Rate in Paleoceanography

NASA Astrophysics Data System (ADS)

Sears, J. R.

2011-12-01

The validation of scientific results requires reproducible methods and data. Often, however, data sets supporting research articles are not openly accessible and interlinked. This analysis tests whether open sharing and linking of supporting data through the PANGAEA° data library measurably increases the citation rate of articles published between 1993 and 2010 in the journal Paleoceanography as reported in the Thomson Reuters Web of Science database. The 12.85% (171) of articles with publicly available supporting data sets received 19.94% (8,056) of the aggregate citations (40,409). Publicly available data were thus significantly (p=0.007, 95% confidence interval) associated with about 35% more citations per article than the average of all articles sampled over the 18-year study period (1,331), and the increase is fairly consistent over time (14 of 18 years). This relationship between openly available, curated data and increased citation rate may incentivize researchers to share their data.

History of United States Army physical fitness and physical readiness training.

PubMed

Knapik, Joseph J; East, Whitfield B

2014-01-01

This article traces the history of US Army physical fitness assessments from the first test developed for Cadets at the US Military Academy in 1858 through efforts to revise the current Army Physical Fitness Test (APFT). The first "Individual Efficiency Test" (1920) for all Soldiers consisted of a 100-yard run, running broad jump, wall climb, hand grenade throw, and obstacle course. The first scientific efforts involved testing of 400 Soldiers and a factor analysis of 25 individual test items. In 1944, this resulted in a 7-item test (pull-up, burpee, squat jump, push-up, man-carry, sit-up and 300-yard run) with a 100-point scoring system. In 1943, women were encouraged to take a "self-assessment" consisting of push-ups, bent knee sit-ups, wing lifts, squat thrusts, running, and a stork stand. In 1946, age-adjusted standards were introduced and in 1965 semiannual fitness assessments were mandated. The number of tests proliferated in the 1969-1973 period with 7 separate assessments. The current APFT consisting of push-ups, sit-ups, and a 2-mile run was introduced in 1980 and alternative tests for those with physical limitations in 1982. Current efforts to revise the assessment involve systematic literature reviews and validating the relationship between test items and common Soldiering tasks.

Reliability of the Test of Integrated Language and Literacy Skills (TILLS).

PubMed

Mailend, Marja-Liisa; Plante, Elena; Anderson, Michele A; Applegate, E Brooks; Nelson, Nickola W

2016-07-01

As new standardized tests become commercially available, it is critical that clinicians have access to the information about a test's psychometric properties, including aspects of reliability. The purpose of the three studies reported in this article was to investigate the reliability of a new test, the Test of Integrated Language and Literacy Skills (TILLS), with consideration of both internal and external sources of measurement error. The TILLS was administered to children aged 6;0-18;11 years. The participants varied in terms of their language and literacy skills and included children with typical language development as well as those diagnosed with language or learning disability. The sample of children also varied in terms of their racial and socioeconomic backgrounds. Study 1 (N = 1056) assessed the internal consistency of TILLS calculating the coefficient omega for each subtest. Study 2 (N = 103) and Study 3 (N = 39) used the intra-class correlation coefficients to report on test-retest and inter-rater reliability respectively. The results indicate strong internal consistency and inter-rater reliability for all subtests of TILLS. The test-retest reliability was strong for all but one subtest, for which the intra-class correlation coefficient was in the acceptable range. This article provides clinicians with essential scientific information that supports the internal and external reliability of a new test of oral and written language skills, the TILLS. Information about reliability is critical for guiding the selection of an appropriate diagnostic tool amongst a number of options. © 2016 Royal College of Speech and Language Therapists.

Test for Chemical Induction of Chromosome Aberration in Cultured Chinese Hamster Ovary (CHO) Cells With and Without Metabolic Activation. Test Article: N,N,N’,N’-tetramethyl Ethanediamine (TMEDA)

DTIC Science & Technology

2008-06-13

ACTIVATION SYSTEM The metabolic activation mixture was prepared by SITEK Research Laboratories and it consisted of phenobarbital -S,6-Benzoflavone...2147 31.0mg/mL Phenobarbital -S,6-Benzoflavone <-70°C April 19. 2009 Detailed information about the S-9 batch used ill the Assay is provided in

The Geant4 physics validation repository

DOE PAGES

Wenzel, H.; Yarba, J.; Dotti, A.

2015-12-23

The Geant4 collaboration regularly performs validation and regression tests. The results are stored in a central repository and can be easily accessed via a web application. In this article we describe the Geant4 physics validation repository which consists of a relational database storing experimental data and Geant4 test results, a java API and a web application. Lastly, the functionality of these components and the technology choices we made are also described

Testing Orr's document delivery test on biomedical journals in South Africa.

PubMed Central

Steynberg, S; Rossouw, S F

1995-01-01

This paper describes the use of a document delivery test (DDT) to measure the availability of biomedical research journals in South African health sciences libraries. The methodology employed was developed twenty years ago by a team of researchers from the Institute for the Advancement of Medical Communication under the direction of R. H. Orr. The testing of the methodology was in itself an objective of the present research. A citation pool consisting of 307 items was constructed from references to journal articles in papers published in 1989 by South African biomedical researchers. The availability of each article was determined at each of seven medical library sites; the performance was measured and presented as an arithmetical value or document delivery capability index (CI). The results of the tests show a high level of availability, ranging from CI = 81.68 to CI = 92.97 for the journals sampled. The DDT methodology was found to be practical, applicable to such studies, and flexible. Its use is recommended for similar studies. Images PMID:7703944

Assembly Test Article (ATA)

NASA Technical Reports Server (NTRS)

Ricks, Glen A.

1988-01-01

The assembly test article (ATA) consisted of two live loaded redesigned solid rocket motor (RSRM) segments which were assembled and disassembled to simulate the actual flight segment stacking process. The test assembly joint was flight RSRM design, which included the J-joint insulation design and metal capture feature. The ATA test was performed mid-November through 24 December 1987, at Kennedy Space Center (KSC), Florida. The purpose of the test was: certification that vertical RSRM segment mating and separation could be accomplished without any damage; verification and modification of the procedures in the segment stacking/destacking documents; and certification of various GSE to be used for flight assembly and inspection. The RSRM vertical segment assembly/disassembly is possible without any damage to the insulation, metal parts, or seals. The insulation J-joint contact area was very close to the predicted values. Numerous deviations and changes to the planning documents were made to ensure the flight segments are effectively and correctly stacked. Various GSE were also certified for use on flight segments, and are discussed in detail.

Sasquatch Footprint Tool

NASA Technical Reports Server (NTRS)

Bledsoe, Kristin

2013-01-01

The Crew Exploration Vehicle Parachute Assembly System (CPAS) is the parachute system for NASA s Orion spacecraft. The test program consists of numerous drop tests, wherein a test article rigged with parachutes is extracted or released from an aircraft. During such tests, range safety is paramount, as is the recoverability of the parachutes and test article. It is crucial to establish an aircraft release point that will ensure that the article and all items released from it will land in safe locations. A new footprint predictor tool, called Sasquatch, was created in MATLAB. This tool takes in a simulated trajectory for the test article, information about all released objects, and atmospheric wind data (simulated or actual) to calculate the trajectories of the released objects. Dispersions are applied to the landing locations of those objects, taking into account the variability of winds, aircraft release point, and object descent rate. Sasquatch establishes a payload release point (e.g., where the payload will be extracted from the carrier aircraft) that will ensure that the payload and all objects released from it will land in a specified cleared area. The landing locations (the final points in the trajectories) are plotted on a map of the test range. Sasquatch was originally designed for CPAS drop tests and includes extensive information about both the CPAS hardware and the primary test range used for CPAS testing. However, it can easily be adapted for more complex CPAS drop tests, other NASA projects, and commercial partners. CPAS has developed the Sasquatch footprint tool to ensure range safety during parachute drop tests. Sasquatch is well correlated to test data and continues to ensure the safety of test personnel as well as the safe recovery of all equipment. The tool will continue to be modified based on new test data, improving predictions and providing added capability to meet the requirements of more complex testing.

Measurement properties of patient-reported outcome measures (PROMs) used in adult patients with chronic kidney disease: A systematic review

PubMed Central

Kyte, Derek; Cockwell, Paul; Marshall, Tom; Gheorghe, Adrian; Keeley, Thomas; Slade, Anita; Calvert, Melanie

2017-01-01

Background Patient-reported outcome measures (PROMs) can provide valuable information which may assist with the care of patients with chronic kidney disease (CKD). However, given the large number of measures available, it is unclear which PROMs are suitable for use in research or clinical practice. To address this we comprehensively evaluated studies that assessed the measurement properties of PROMs in adults with CKD. Methods Four databases were searched; reference list and citation searching of included studies was also conducted. The COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) checklist was used to appraise the methodological quality of the included studies and to inform a best evidence synthesis for each PROM. Results The search strategy retrieved 3,702 titles/abstracts. After 288 duplicates were removed, 3,414 abstracts were screened and 71 full-text articles were retrieved for further review. Of these, 24 full-text articles were excluded as they did not meet the eligibility criteria. Following reference list and citation searching, 19 articles were retrieved bringing the total number of papers included in the final analysis to 66. There was strong evidence supporting internal consistency and moderate evidence supporting construct validity for the Kidney Disease Quality of Life-36 (KDQOL-36) in pre-dialysis patients. In the dialysis population, the KDQOL-Short Form (KDQOL-SF) had strong evidence for internal consistency and structural validity and moderate evidence for test-retest reliability and construct validity while the KDQOL-36 had moderate evidence of internal consistency, test-retest reliability and construct validity. The End Stage Renal Disease-Symptom Checklist Transplantation Module (ESRD-SCLTM) demonstrated strong evidence for internal consistency and moderate evidence for test-retest reliability, structural and construct validity in renal transplant recipients. Conclusions We suggest considering the KDQOL-36 for use in pre-dialysis patients; the KDQOL-SF or KDQOL-36 for dialysis patients and the ESRD-SCLTM for use in transplant recipients. However, further research is required to evaluate the measurement error, structural validity, responsiveness and patient acceptability of PROMs used in CKD. PMID:28636678

A Diagnostic Study of Computer Application of Structural Communication Grid

ERIC Educational Resources Information Center

Bahar, Mehmet; Aydin, Fatih; Karakirik, Erol

2009-01-01

In this article, Structural communication grid (SCG), an alternative measurement and evaluation technique, has been firstly summarised and the design, development and implementation of a computer based SCG system have been introduced. The system is then tested on a sample of 154 participants consisting of candidate students, science teachers and…

Rater Cognition: Implications for Validity

ERIC Educational Resources Information Center

Bejar, Issac I.

2012-01-01

The scoring process is critical in the validation of tests that rely on constructed responses. Documenting that readers carry out the scoring in ways consistent with the construct and measurement goals is an important aspect of score validity. In this article, rater cognition is approached as a source of support for a validity argument for scores…

Accuracy of imaging methods for detection of bone tissue invasion in patients with oral squamous cell carcinoma

PubMed Central

Uribe, S; Rojas, LA; Rosas, CF

2013-01-01

The objective of this review is to evaluate the diagnostic accuracy of imaging methods for detection of mandibular bone tissue invasion by squamous cell carcinoma (SCC). A systematic review was carried out of studies in MEDLINE, SciELO and ScienceDirect, published between 1960 and 2012, in English, Spanish or German, which compared detection of mandibular bone tissue invasion via different imaging tests against a histopathology reference standard. Sensitivity and specificity data were extracted from each study. The outcome measure was diagnostic accuracy. We found 338 articles, of which 5 fulfilled the inclusion criteria. Tests included were: CT (four articles), MRI (four articles), panoramic radiography (one article), positron emission tomography (PET)/CT (one article) and cone beam CT (CBCT) (one article). The quality of articles was low to moderate and the evidence showed that all tests have a high diagnostic accuracy for detection of mandibular bone tissue invasion by SCC, with sensitivity values of 94% (MRI), 91% (CBCT), 83% (CT) and 55% (panoramic radiography), and specificity values of 100% (CT, MRI, CBCT), 97% (PET/CT) and 91.7% (panoramic radiography). Available evidence is scarce and of only low to moderate quality. However, it is consistently shown that current imaging methods give a moderate to high diagnostic accuracy for the detection of mandibular bone tissue invasion by SCC. Recommendations are given for improving the quality of future reports, in particular provision of a detailed description of the patients' conditions, the imaging instrument and both imaging and histopathological invasion criteria. PMID:23420854

Acoustical Testing Laboratory Developed to Support the Low-Noise Design of Microgravity Space Flight Hardware

NASA Technical Reports Server (NTRS)

Cooper, Beth A.

2001-01-01

The NASA John H. Glenn Research Center at Lewis Field has designed and constructed an Acoustical Testing Laboratory to support the low-noise design of microgravity space flight hardware. This new laboratory will provide acoustic emissions testing and noise control services for a variety of customers, particularly for microgravity space flight hardware that must meet International Space Station limits on noise emissions. These limits have been imposed by the space station to support hearing conservation, speech communication, and safety goals as well as to prevent noise-induced vibrations that could impact microgravity research data. The Acoustical Testing Laboratory consists of a 23 by 27 by 20 ft (height) convertible hemi/anechoic chamber and separate sound-attenuating test support enclosure. Absorptive 34-in. fiberglass wedges in the test chamber provide an anechoic environment down to 100 Hz. A spring-isolated floor system affords vibration isolation above 3 Hz. These criteria, along with very low design background levels, will enable the acquisition of accurate and repeatable acoustical measurements on test articles, up to a full space station rack in size, that produce very little noise. Removable floor wedges will allow the test chamber to operate in either a hemi/anechoic or anechoic configuration, depending on the size of the test article and the specific test being conducted. The test support enclosure functions as a control room during normal operations but, alternatively, may be used as a noise-control enclosure for test articles that require the operation of noise-generating test support equipment.

Recent Improvements to the Acoustical Testing Laboratory at the NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Podboy, Devin M.; Mirecki, Julius H.; Walker, Bruce E.; Sutliff, Daniel L.

2014-01-01

The Acoustical Testing Laboratory (ATL) consists of a 27- by 23- by 20-ft (height) convertible hemi/anechoic chamber and separate sound-attenuating test support enclosure. Absorptive fiberglass wedges in the test chamber provide an anechoic environment down to 100 Hz. A spring-isolated floor system affords vibration isolation above 3 Hz. These specifications, along with very low design background levels, enable the acquisition of accurate and repeatable acoustical measurements on test articles that produce very low sound pressures. Removable floor wedges allow the test chamber to operate in either a hemi-anechoic or anechoic configuration, depending on the size of the test article and the specific test being conducted. The test support enclosure functions as a control room during normal operations. Recently improvements were accomplished in support of continued usage of the ATL by NASA programs including an analysis of the ultra-sonic characteristics. A 3-D traverse system inside the chamber was utilized for acquiring acoustic data for these tests. The traverse system drives a linear array of 13, 1/4 in.-microphones spaced 3 in. apart (36 in. span). An updated data acquisition system was also incorporated into the facility.

Recent Improvements to the Acoustical Testing Laboratory at the NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Podboy, Devin M.; Mirecki, Julius H.; Walker, Bruce E.; Sutliff, Daniel L.

2014-01-01

The Acoustical Testing Laboratory (ATL) consists of a 27 by 23 by 20 ft (height) convertible hemi/anechoic chamber and separate sound-attenuating test support enclosure. Absorptive fiberglass wedges in the test chamber provide an anechoic environment down to 100 Hz. A spring-isolated floor system affords vibration isolation above 3 Hz. These specifications, along with very low design background levels, enable the acquisition of accurate and repeatable acoustical measurements on test articles that produce very low sound pressures. Removable floor wedges allow the test chamber to operate in either a hemi-anechoic or anechoic configuration, depending on the size of the test article and the specific test being conducted. The test support enclosure functions as a control room during normal operations. Recently improvements were accomplished in support of continued usage of the ATL by NASA programs including an analysis of the ultra-sonic characteristics. A 3 dimensional traverse system inside the chamber was utilized for acquiring acoustic data for these tests. The traverse system drives a linear array of 13, 1/4"-microphones spaced 3" apart (36" span). An updated data acquisition system was also incorporated into the facility.

Product Quality Research Institute evaluation of cascade impactor profiles of pharmaceutical aerosols: part 2--evaluation of a method for determining equivalence.

PubMed

Christopher, David; Adams, Wallace P; Lee, Douglas S; Morgan, Beth; Pan, Ziqing; Singh, Gur Jai Pal; Tsong, Yi; Lyapustina, Svetlana

2007-01-19

The purpose of this article is to present the thought process, methods, and interim results of a PQRI Working Group, which was charged with evaluating the chi-square ratio test as a potential method for determining in vitro equivalence of aerodynamic particle size distribution (APSD) profiles obtained from cascade impactor measurements. Because this test was designed with the intention of being used as a tool in regulatory review of drug applications, the capability of the test to detect differences in APSD profiles correctly and consistently was evaluated in a systematic way across a designed space of possible profiles. To establish a "base line," properties of the test in the simplest case of pairs of identical profiles were studied. Next, the test's performance was studied with pairs of profiles, where some difference was simulated in a systematic way on a single deposition site using realistic product profiles. The results obtained in these studies, which are presented in detail here, suggest that the chi-square ratio test in itself is not sufficient to determine equivalence of particle size distributions. This article, therefore, introduces the proposal to combine the chi-square ratio test with a test for impactor-sized mass based on Population Bioequivalence and describes methods for evaluating discrimination capabilities of the combined test. The approaches and results described in this article elucidate some of the capabilities and limitations of the original chi-square ratio test and provide rationale for development of additional tests capable of comparing APSD profiles of pharmaceutical aerosols.

Impact of a weekly reading program on orthopedic surgery residents' in-training examination.

PubMed

Weglein, Daniel G; Gugala, Zbigniew; Simpson, Suzanne; Lindsey, Ronald W

2015-05-01

In response to a decline in individual residents' performance and overall program performance on the Orthopaedic In-Training Examination (OITE), the authors' department initiated a daily literature reading program coupled with weekly tests on the assigned material. The goal of this study was to assess the effect of the reading program on individual residents' scores and the training program's OITE scores. The reading program consisted of daily review articles from the Journal of the American Academy of Orthopaedic Surgeons, followed by a weekly written examination consisting of multiple-choice or fill-in-the-blank questions. All articles were selected and all questions were written by the departmental chair. A questionnaire was given to assess residents' perceptions of the weekly tests. As a result of implementing the reading program for a 10-month period, residents' subsequent performance on the OITE significantly improved (mean score increase, 4, P<.0001; percentile score increase, 11, P=.0007). The difference in mean score was significant for residents in postgraduate years 3, 4, and 5. A statistically significant correlation was found between weekly test scores and performance on the OITE, with a significant correlation between weekly test scores and OITE percentile ranking. The study results also showed a positive correlation between reading test attendance and weekly test scores. Residents' anonymous questionnaire responses also demonstrated the reading program to be a valuable addition to the residency training curriculum. In conclusion, the study strongly supports the benefits of a weekly reading and examination program in enhancing the core knowledge of orthopedic surgery residents. Copyright 2015, SLACK Incorporated.

Education Policy Analysis Archives, 2001: Numbers 1-11.

ERIC Educational Resources Information Center

Glass, Gene V., Ed.

2001-01-01

This document consists of articles 1-11 published in the electronic journal "Education Policy Analysis Archives" for the year 2001: (1) "School Segregation of Children Who Migrate to the United States from Puerto Rico" (Luis M. Laosa); (2) "Testing Times: A School Case Study" (Ivor Goodson and Martha Foote); (3) "Impact of U.S. Overseas Schools in…

Reading Achievements of Vietnamese Grade 5 Pupils

ERIC Educational Resources Information Center

Griffin, Patrick; Thanh, Mai Thi

2006-01-01

This article described a national study in Vietnam whereby a probability sample of students was chosen from each of the 61 provinces. A reading test consisting of 60 items was administered. The items were matched to the Vietnam reading and language curriculum for Year 5 students. Using a skills audit of the items, a variable of reading development…

Goats Don't Wear Coats: An Examination of Semantic Interference in Rhyming Assessments of Reading Readiness for English Language Learners

ERIC Educational Resources Information Center

Moreira, Sylvia; Hamilton, Maryellen

2006-01-01

Rhyming tests have historically been used in the education system to assess reading readiness. English language learners (ELLs) have consistently scored poorly on these assessment tools. The current article examines a possible reason for this poor performance by ELLs. Specifically, the authors examined the relationship between semantic…

NASA/MSFC ground experiment for large space structure control verification

NASA Technical Reports Server (NTRS)

Waites, H. B.; Seltzer, S. M.; Tollison, D. K.

1984-01-01

Marshall Space Flight Center has developed a facility in which closed loop control of Large Space Structures (LSS) can be demonstrated and verified. The main objective of the facility is to verify LSS control system techniques so that on orbit performance can be ensured. The facility consists of an LSS test article which is connected to a payload mounting system that provides control torque commands. It is attached to a base excitation system which will simulate disturbances most likely to occur for Orbiter and DOD payloads. A control computer will contain the calibration software, the reference system, the alignment procedures, the telemetry software, and the control algorithms. The total system will be suspended in such a fashion that LSS test article has the characteristics common to all LSS.

Response of Buried Vertically Oriented Cylinders to Dynamic Loading,

DTIC Science & Technology

1980-06-01

BALSARA • , . / ,, _,-, -. 1i S ,LESPONSE OF BURIED VERTICALLY 9RIENTED CYLINDERS 𔃺 .-TO DINAMIC LOADING_ 9AYLE E. LRTOrwW&-N JIIMY P./BALSARA Nk...1.7, 2,8, and 4.0 inches). The end caps for the cylinders consisted of a steel shell filled with high- strength concrete; however, the end caps were...not designed to be test articles. The average concrete compressive strength of the cylinders on test day was 44.0 MPa (6,380 psi). The three DEOT

Educational Testing and Validity of Conclusions in the Scholarship of Teaching and Learning

PubMed Central

Beltyukova, Svetlana A.; Martin, Beth A.

2013-01-01

Validity and its integral evidence of reliability are fundamentals for educational and psychological measurement, and standards of educational testing. Herein, we describe these standards of educational testing, along with their subtypes including internal consistency, inter-rater reliability, and inter-rater agreement. Next, related issues of measurement error and effect size are discussed. This article concludes with a call for future authors to improve reporting of psychometrics and practical significance with educational testing in the pharmacy education literature. By increasing the scientific rigor of educational research and reporting, the overall quality and meaningfulness of SoTL will be improved. PMID:24249848

Fuel containment and damage tolerance in large composite primary aircraft structures. Phase 2: Testing

NASA Technical Reports Server (NTRS)

Sandifer, J. P.; Denny, A.; Wood, M. A.

1985-01-01

Technical issues associated with fuel containment and damage tolerance of composite wing structures for transport aircraft were investigated. Material evaluation tests were conducted on two toughened resin composites: Celion/HX1504 and Celion/5245. These consisted of impact, tension, compression, edge delamination, and double cantilever beam tests. Another test series was conducted on graphite/epoxy box beams simulating a wing cover to spar cap joint configuration of a pressurized fuel tank. These tests evaluated the effectiveness of sealing methods with various fastener types and spacings under fatigue loading and with pressurized fuel. Another test series evaluated the ability of the selected coatings, film, and materials to prevent fuel leakage through 32-ply AS4/2220-1 laminates at various impact energy levels. To verify the structural integrity of the technology demonstration article structural details, tests were conducted on blade stiffened panels and sections. Compression tests were performed on undamaged and impacted stiffened AS4/2220-1 panels and smaller element tests to evaluate stiffener pull-off, side load and failsafe properties. Compression tests were also performed on panels subjected to Zone 2 lightning strikes. All of these data were integrated into a demonstration article representing a moderately loaded area of a transport wing. This test combined lightning strike, pressurized fuel, impact, impact repair, fatigue and residual strength.

Assessment of a condition-specific quality-of-life measure for patients with developmentally absent teeth: validity and reliability testing.

PubMed

Akram, A J; Ireland, A J; Postlethwaite, K C; Sandy, J R; Jerreat, A S

2013-11-01

This article describes the process of validity and reliability testing of a condition-specific quality-of-life measure for patients with hypodontia presenting for orthodontic treatment. The development of the instrument is described in a previous article. Royal Devon and Exeter NHS Foundation Trust & Musgrove Park Hospital, Taunton. The child perception questionnaire was used as a standard against which to test criterion validity. The Bland and Altman method was used to check agreement between the two questionnaires. Construct validity was tested using principal component analysis on the four sections of the questionnaire. Test-retest reliability was tested using intraclass correlation coefficient and Bland and Altman method. Cronbach's alpha was used to test internal consistency reliability. Overall the questionnaire showed good reliability, criterion and construct validity. This together with previous evidence of good face and content validity suggests that the instrument may prove useful in clinical practice and further research. This study has demonstrated that the newly developed condition-specific quality-of-life questionnaire is both valid and reliable for use in young patients with hypodontia. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

What Performance Characteristics Determine Elite Versus Nonelite Athletes in the Same Sport?

PubMed Central

Lorenz, Daniel S.; Reiman, Michael P.; Lehecka, B.J.; Naylor, Andrew

2013-01-01

Context: There are significant data comparing elite and nonelite athletes in anaerobic field and court sports as well as endurance sports. This review delineates specific performance characteristics in the elite athlete and may help guide rehabilitation. Evidence Acquisition: A Medline search from April 1982 to April 2012 was undertaken for articles written in English. Additional references were accrued from reference lists of research articles. Results: In the anaerobic athlete, maximal power production was consistently correlated to elite performance. Elite performance in the endurance athlete is more ambiguous, however, and appears to be related to the dependent variable investigated in each individual study. Conclusion: In anaerobic field and court sport athletes, maximal power output is most predictive of elite performance. In the endurance athlete, however, it is not as clear. Elite endurance athletes consistently test higher than nonelite athletes in running economy, anaerobic threshold, and VO2max. PMID:24427430

The Bereavement Guilt Scale.

PubMed

Li, Jie; Stroebe, Magaret; Chan, Cecilia L W; Chow, Amy Y M

2017-06-01

The rationale, development, and validation of the Bereavement Guilt Scale (BGS) are described in this article. The BGS was based on a theoretically developed, multidimensional conceptualization of guilt. Part 1 describes the generation of the item pool, derived from in-depth interviews, and review of the scientific literature. Part 2 details statistical analyses for further item selection (Sample 1, N = 273). Part 3 covers the psychometric properties of the emergent-BGS (Sample 2, N = 600, and Sample 3, N = 479). Confirmatory factor analysis indicated that a five-factor model fit the data best. Correlations of BGS scores with depression, anxiety, self-esteem, self-forgiveness, and mode of death were consistent with theoretical predictions, supporting the construct validity of the measure. The internal consistency and test-retest reliability were also supported. Thus, initial testing or examination suggests that the BGS is a valid tool to assess multiple components of bereavement guilt. Further psychometric testing across cultures is recommended.

Effects of Hearing Impairment and Hearing Aid Amplification on Listening Effort: A Systematic Review.

PubMed

Ohlenforst, Barbara; Zekveld, Adriana A; Jansma, Elise P; Wang, Yang; Naylor, Graham; Lorens, Artur; Lunner, Thomas; Kramer, Sophia E

To undertake a systematic review of available evidence on the effect of hearing impairment and hearing aid amplification on listening effort. Two research questions were addressed: Q1) does hearing impairment affect listening effort? and Q2) can hearing aid amplification affect listening effort during speech comprehension? English language articles were identified through systematic searches in PubMed, EMBASE, Cinahl, the Cochrane Library, and PsycINFO from inception to August 2014. References of eligible studies were checked. The Population, Intervention, Control, Outcomes, and Study design strategy was used to create inclusion criteria for relevance. It was not feasible to apply a meta-analysis of the results from comparable studies. For the articles identified as relevant, a quality rating, based on the 2011 Grading of Recommendations Assessment, Development, and Evaluation Working Group guidelines, was carried out to judge the reliability and confidence of the estimated effects. The primary search produced 7017 unique hits using the keywords: hearing aids OR hearing impairment AND listening effort OR perceptual effort OR ease of listening. Of these, 41 articles fulfilled the Population, Intervention, Control, Outcomes, and Study design selection criteria of: experimental work on hearing impairment OR hearing aid technologies AND listening effort OR fatigue during speech perception. The methods applied in those articles were categorized into subjective, behavioral, and physiological assessment of listening effort. For each study, the statistical analysis addressing research question Q1 and/or Q2 was extracted. In seven articles more than one measure of listening effort was provided. Evidence relating to Q1 was provided by 21 articles that reported 41 relevant findings. Evidence relating to Q2 was provided by 27 articles that reported 56 relevant findings. The quality of evidence on both research questions (Q1 and Q2) was very low, according to the Grading of Recommendations Assessment, Development, and Evaluation Working Group guidelines. We tested the statistical evidence across studies with nonparametric tests. The testing revealed only one consistent effect across studies, namely that listening effort was higher for hearing-impaired listeners compared with normal-hearing listeners (Q1) as measured by electroencephalographic measures. For all other studies, the evidence across studies failed to reveal consistent effects on listening effort. In summary, we could only identify scientific evidence from physiological measurement methods, suggesting that hearing impairment increases listening effort during speech perception (Q1). There was no scientific, finding across studies indicating that hearing aid amplification decreases listening effort (Q2). In general, there were large differences in the study population, the control groups and conditions, and the outcome measures applied between the studies included in this review. The results of this review indicate that published listening effort studies lack consistency, lack standardization across studies, and have insufficient statistical power. The findings underline the need for a common conceptual framework for listening effort to address the current shortcomings.

Effects of Hearing Impairment and Hearing Aid Amplification on Listening Effort: A Systematic Review

PubMed Central

Ohlenforst, Barbara; Jansma, Elise P.; Wang, Yang; Naylor, Graham; Lorens, Artur; Lunner, Thomas; Kramer, Sophia E.

2017-01-01

Objectives: To undertake a systematic review of available evidence on the effect of hearing impairment and hearing aid amplification on listening effort. Two research questions were addressed: Q1) does hearing impairment affect listening effort? and Q2) can hearing aid amplification affect listening effort during speech comprehension? Design: English language articles were identified through systematic searches in PubMed, EMBASE, Cinahl, the Cochrane Library, and PsycINFO from inception to August 2014. References of eligible studies were checked. The Population, Intervention, Control, Outcomes, and Study design strategy was used to create inclusion criteria for relevance. It was not feasible to apply a meta-analysis of the results from comparable studies. For the articles identified as relevant, a quality rating, based on the 2011 Grading of Recommendations Assessment, Development, and Evaluation Working Group guidelines, was carried out to judge the reliability and confidence of the estimated effects. Results: The primary search produced 7017 unique hits using the keywords: hearing aids OR hearing impairment AND listening effort OR perceptual effort OR ease of listening. Of these, 41 articles fulfilled the Population, Intervention, Control, Outcomes, and Study design selection criteria of: experimental work on hearing impairment OR hearing aid technologies AND listening effort OR fatigue during speech perception. The methods applied in those articles were categorized into subjective, behavioral, and physiological assessment of listening effort. For each study, the statistical analysis addressing research question Q1 and/or Q2 was extracted. In seven articles more than one measure of listening effort was provided. Evidence relating to Q1 was provided by 21 articles that reported 41 relevant findings. Evidence relating to Q2 was provided by 27 articles that reported 56 relevant findings. The quality of evidence on both research questions (Q1 and Q2) was very low, according to the Grading of Recommendations Assessment, Development, and Evaluation Working Group guidelines. We tested the statistical evidence across studies with nonparametric tests. The testing revealed only one consistent effect across studies, namely that listening effort was higher for hearing-impaired listeners compared with normal-hearing listeners (Q1) as measured by electroencephalographic measures. For all other studies, the evidence across studies failed to reveal consistent effects on listening effort. Conclusion: In summary, we could only identify scientific evidence from physiological measurement methods, suggesting that hearing impairment increases listening effort during speech perception (Q1). There was no scientific, finding across studies indicating that hearing aid amplification decreases listening effort (Q2). In general, there were large differences in the study population, the control groups and conditions, and the outcome measures applied between the studies included in this review. The results of this review indicate that published listening effort studies lack consistency, lack standardization across studies, and have insufficient statistical power. The findings underline the need for a common conceptual framework for listening effort to address the current shortcomings. PMID:28234670

Relocation of the Cryo-Test Facility to NASA-MSFC

NASA Technical Reports Server (NTRS)

Sisco, Jimmy D.; McConnaughey, Paul K. (Technical Monitor)

2002-01-01

The Environmental Test Facility (ETF), located at NASA-Marshall Space Flight Center, Huntsville, Alabama, has provided thermal vacuum testing for several major programs since the 1960's. The ETF consists of over 13 thermal vacuum chambers sized and configured to handle the majority of test payloads. Testing is performed around the clock with multiple tests being conducted simultaneously. Chamber selection to achieve the best match with test articles and juggling program schedules, at times, can be a challenge. The ETF's Sunspot chamber has had tests scheduled and operated back-to-back for several years and provides the majority of schedule conflicts. Future test programs have been identified which surpass the current Sunspot availability. This paper describes a very low cost alternate to reduce schedule conflicts by utilizing government excess equipment

Consistency between Peer Reviewers for a Clinical Specialty Journal.

ERIC Educational Resources Information Center

Cullen, David J.; Macaulay, Anne

1992-01-01

Analysis of reliability among peer reviews of 422 unsolicited articles for the "Journal of Clinical Anesthesia" found that most articles' reviews were consistent or near consistent. However, articles reviewed by two of the editorial board members were much less likely to be accepted than those read by two nonmembers. (Author/MSE)

Systematic Screening at the Middle School Level: Score Reliability and Validity of the Student Risk Screening Scale

ERIC Educational Resources Information Center

Lane, Kathleen Lynne; Parks, Robin J.; Kalberg, Jemma Robertson; Carter, Erik W.

2007-01-01

This article presents findings of two studies, one conducted with middle school students (n = 500) in a rural setting and a second conducted with middle school students (n = 528) in an urban setting, of the reliability and validity of the "Student Risk Screening Scale" (SRSS; Drummond, 1994). Results revealed high internal consistency, test-retest…

Predicting future forestland area: a comparison of econometric approaches.

Treesearch

SoEun Ahn; Andrew J. Plantinga; Ralph J. Alig

2000-01-01

Predictions of future forestland area are an important component of forest policy analyses. In this article, we test the ability of econometric land use models to accurately forecast forest area. We construct a panel data set for Alabama consisting of county and time-series observation for the period 1964 to 1992. We estimate models using restricted data sets-namely,...

NCLB Keeps Some Great Teaching Candidates out Forever

ERIC Educational Resources Information Center

Wakefield, Dara

2007-01-01

In this article, the author presents the story of Hope--an education student who, despite many successes, was consistently unable to pass the reading portion of a screening test (Praxis I) that is a prerequisite to student teaching in her home state of Georgia. Hope's only trouble was the fact that she was a slow reader due to attention deficit…

Self-Enhancement on a Self-Categorization Leash: Evidence for a Dual-Process Model of First-and Third-Person Perceptions

ERIC Educational Resources Information Center

Zhang, Jinguang

2010-01-01

Research suggests that first- and third-person perceptions are driven by the motive to self-enhance and cognitive processes involving the perception of social norms. This article proposes and tests a dual-process model that predicts an interaction between cognition and motivation. Consistent with the model, Experiment 1 (N = 112) showed that…

Wikipedia in Higher Education: Changes in Perceived Value through Content Contribution

ERIC Educational Resources Information Center

Soler-Adillon, Joan; Pavlovic, Dragana; Freixa, Pere

2018-01-01

Wikipedia is a widely used resource by university students, but it is not necessarily regarded as being reliable and trustworthy by them, nor is it seen as a context in which to make content contributions. This paper presents a teaching and research project that consisted in having students edit or create Wikipedia articles and testing whether or…

The Effect of a Perceptual-Motor Intervention Programme on Learning Readiness of Grade R Learners from South African Deprived Environments

ERIC Educational Resources Information Center

Erasmus, Myrtle; Janse van Rensburg, Ona; Pienaar, Anita E.; Ellis, Suria

2016-01-01

South Africa consists of developed and developing contexts. This article reports on a study undertaken to determine the effect of a Perceptual--motor Intervention Programme in learning readiness of Grade R learners from deprived environments. Le Roux's Group Test for School Readiness was used as baseline assessments to establish the school…

Careers of Professional Staff in Australian and UK Universities: A Mixed Methods Pilot Study

ERIC Educational Resources Information Center

Gander, Michelle

2017-01-01

This article confirms the reliability of a protean and boundaryless career attitudes scale, tested in a pilot study. Additionally, it summarises the results of this study into the career attitudes of professional staff in Australian and UK universities. A mixed methods approach was taken using a survey consisting of both closed questions on a…

Conditional Risk for PTSD among Latinos: A Systematic Review of Racial/Ethnic Differences and Sociocultural Explanations

PubMed Central

Alcántara, Carmela; Casement, Melynda D.; Lewis-Fernández, Roberto

2012-01-01

Conditional risk for Posttraumatic Stress Disorder (PTSD)—defined as prevalence, onset, persistence, or severity of PTSD after traumatic exposure—appears to be higher among Latinos relative to non-Latinos after accounting for sociodemographic factors. This systematic review focuses on differences in conditional risk for PTSD between Latinos and non-Latinos (White, Black, or combined) and across Latino subgroups in studies that adjust for trauma exposure. We discuss methodological characteristics of existing articles and sociocultural explanatory factors. Electronic bibliographic searches were conducted for English-language articles published in peer-reviewed journals between 1991 and 2012. We followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Twenty-eight articles met inclusion criteria. Consistent support was found for elevated rates of PTSD onset and PTSD severity among Latinos relative to non-Latino Whites. The evidence on racial/ethnic differences in conditional risk for PTSD prevalence and PTSD persistence is mixed. Twenty-four articles evaluated sociocultural explanations, with the strongest support found for racial/ethnic variation in peritraumatic responses and structure of PTSD. There were also consistent main effects for social disadvantage in studies that simultaneously adjusted for effects of race/ethnicity. Future research should use theoretically-driven models to formally test for interactions between sociocultural factors, race/ethnicity, and PTSD probability. PMID:23159328

Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure.

PubMed

Hall, William J

2016-11-01

This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability testing, and confirmatory factor analysis. A sample of 275 middle school students was used to examine the psychometric properties and factor structure of the BullyHARM, which consists of 22 items and 6 subscales: physical bullying, verbal bullying, social/relational bullying, cyber-bullying, property bullying, and sexual bullying. First-order and second-order factor models were evaluated. Results demonstrate that the first-order factor model had superior fit. Results of reliability testing indicate that the BullyHARM scale and subscales have very good internal consistency reliability. Findings indicate that the BullyHARM has good properties regarding content validation and respondent-related validation and is a promising instrument for measuring bullying victimization in school.

Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure

PubMed Central

Hall, William J.

2017-01-01

This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability testing, and confirmatory factor analysis. A sample of 275 middle school students was used to examine the psychometric properties and factor structure of the BullyHARM, which consists of 22 items and 6 subscales: physical bullying, verbal bullying, social/relational bullying, cyber-bullying, property bullying, and sexual bullying. First-order and second-order factor models were evaluated. Results demonstrate that the first-order factor model had superior fit. Results of reliability testing indicate that the BullyHARM scale and subscales have very good internal consistency reliability. Findings indicate that the BullyHARM has good properties regarding content validation and respondent-related validation and is a promising instrument for measuring bullying victimization in school. PMID:28194041

Validity and Reliability Testing of an e-learning Questionnaire for Chemistry Instruction

NASA Astrophysics Data System (ADS)

Guspatni, G.; Kurniawati, Y.

2018-04-01

The aim of this paper is to examine validity and reliability of a questionnaire used to evaluate e-learning implementation in chemistry instruction. 48 questionnaires were filled in by students who had studied chemistry through e-learning system. The questionnaire consisted of 20 indicators evaluating students’ perception on using e-learning. Parametric testing was done as data were assumed to follow normal distribution. Item validity of the questionnaire was examined through item-total correlation using Pearson’s formula while its reliability was assessed with Cronbach’s alpha formula. Moreover, convergent validity was assessed to see whether indicators building a factor had theoretically the same underlying construct. The result of validity testing revealed 19 valid indicators while the result of reliability testing revealed Cronbach’s alpha value of .886. The result of factor analysis showed that questionnaire consisted of five factors, and each of them had indicators building the same construct. This article shows the importance of factor analysis to get a construct valid questionnaire before it is used as research instrument.

Possible anti-VGKC autoimmune limbic encephalitis associated with SIADH.

PubMed

Black, Nicholas; Hamada, Hazim

2018-03-07

An 80-year-old woman presented with a 5-week history of increasing confusion. Examination was remarkable only for deficits in short-term memory and paranoid thoughts. Blood tests revealed hyponatraemia, and further biochemical testing was consistent with syndrome of inappropriate antidiuretic hormone (SIADH). After an exhaustive diagnostic workup for causes of SIADH, the only abnormal finding was a mildly raised antivoltage-gated potassium channel (VGKC) titre of 185 pmol/L (0-69) consistent with possible anti-VGKC autoimmune limbic encephalitis. However, other diagnostic features were absent. She is currently undergoing outpatient investigation for other causes of memory loss. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Ensuring Safe Exploration: Ares Launch Vehicle Integrated Vehicle Ground Vibration Testing

NASA Technical Reports Server (NTRS)

Tuma, M. L.; Chenevert, D. J.

2010-01-01

Integrated vehicle ground vibration testing (IVGVT) will be a vital component for ensuring the safety of NASA's next generation of exploration vehicles to send human beings to the Moon and beyond. A ground vibration test (GVT) measures the fundamental dynamic characteristics of launch vehicles during various phases of flight. The Ares Flight & Integrated Test Office (FITO) will be leading the IVGVT for the Ares I crew launch vehicle at Marshall Space Flight Center (MSFC) from 2012 to 2014 using Test Stand (TS) 4550. MSFC conducted similar GVT for the Saturn V and Space Shuttle vehicles. FITO is responsible for performing the IVGVT on the Ares I crew launch vehicle, which will lift the Orion crew exploration vehicle to low Earth orbit, and the Ares V cargo launch vehicle, which can launch the lunar lander into orbit and send the combined Orionilander vehicles toward the Moon. Ares V consists of a six-engine core stage with two solid rocket boosters and an Earth departure stage (EDS). The same engine will power the EDS and the Ares I second stage. For the Ares IVGVT, the current plan is to test six configurations in three unique test positions inside TS 4550. Position 1 represents the entire launch stack at liftoff (using inert first stage segments). Position 2 consists of the entire launch stack at first stage burn-out (using empty first stage segments). Four Ares I second stage test configurations will be tested in Position 3, consisting of the Upper Stage and Orion crew module in four nominal conditions: J-2X engine ignition, post Launch Abort System (LAS) jettison, critical slosh mass, and J-2X burn-out. Because of long disuse, TS 4550 is being repaired and reactivated to conduct the Ares I IVGVT. The Shuttle-era platforms have been removed and are being replaced with mast climbers that provide ready access to the test articles and can be moved easily to support different positions within the test stand. The electrical power distribution system for TS 4550 was upgraded. Two new cranes will help move test articles at the test stand and at the Redstone Arsenal railhead where first stage segments will be received in 2011. The Hydrodynamic Support systems (HDSs) used for Saturn and Shuttle have been disassembled and evaluated for use during IVGVT. Analyses indicate that the 45-year-old HDSs can be refurbished to support the Ares I IVGVT. An alternate concept for a pneumatic suspension system is also being explored. A decision on which suspension system configuration to use for IVGVT will be made in 2010. In the next three years, the team will complete the updates to TS 4550, upgrade the test and data collection equipment, and finalize the configurations of the test articles to be used in the IVGVT. With NASA's GVT capabilities reestablished, the FITO team will be well positioned to perform similar work on Ares V, the largest exploration launch vehicle NASA has ever built. The GVT effort continues NASA's 50-year commitment to using testing and data analysis for safer, more reliable launch vehicles.

Using Response Surface Methods to Correlate the Modal Test of an Inflatable Test Article

NASA Technical Reports Server (NTRS)

Gupta, Anju

2013-01-01

This paper presents a practical application of response surface methods (RSM) to correlate a finite element model of a structural modal test. The test article is a quasi-cylindrical inflatable structure which primarily consists of a fabric weave, with an internal bladder and metallic bulkheads on either end. To mitigate model size, the fabric weave was simplified by representing it with shell elements. The task at hand is to represent the material behavior of the weave. The success of the model correlation is measured by comparing the four major modal frequencies of the analysis model to the four major modal frequencies of the test article. Given that only individual strap material properties were provided and material properties of the overall weave were not available, defining the material properties of the finite element model became very complex. First it was necessary to determine which material properties (modulus of elasticity in the hoop and longitudinal directions, shear modulus, Poisson's ratio, etc.) affected the modal frequencies. Then a Latin Hypercube of the parameter space was created to form an efficiently distributed finite case set. Each case was then analyzed with the results input into RSM. In the resulting response surface it was possible to see how each material parameter affected the modal frequencies of the analysis model. If the modal frequencies of the analysis model and its corresponding parameters match the test with acceptable accuracy, it can be said that the model correlation is successful.

Managed care, market power, and monopsony.

PubMed Central

Pauly, M V

1998-01-01

OBJECTIVE: To examine the theoretical possibility of monopsony behavior under managed care insurance. STUDY DESIGN: Use of microeconomic theory to examine how managed care plans with market power would be expected to behave, and effects of that behavior on consumer and supplier welfare. PRINCIPAL FINDINGS: The article shows that, under managed care monopsony, the welfare of consumers may be increased but overall economic welfare will necessarily be reduced. It offers a test for whether the lower prices paid by managed care buyers with larger market share represent welfare-reducing monopsony or a welfare-increasing movement away from provider monopoly. The test says that, if the quantity of inputs (supplied under conditions of increasing long-run marginal cost) declines, monopsony is present. The article also argues that the translation of lower provider prices into lower premiums is consistent with welfare-reducing monopsony by nonprofit health plans. In contrast, for-profit health plans that obtain monopsony may reduce the welfare of consumers as well as that of input suppliers. These theoretical conclusions are shown to be consistent with recent empirical research indicating a negative relationship between buyer market power and cost per enrollee. CONCLUSIONS: Traditional antitrust policy has not been able to deal well with monopsony. The article concludes that health plans that use their market power to reduce medical spending may harm the well-being both of specialized medical workers and of consumers of medical care. Antitrust policy may need to be modified to deal with this situation. PMID:9865228

Space Station Freedom solar array panels plasma interaction test facility

NASA Technical Reports Server (NTRS)

Martin, Donald F.; Mellott, Kenneth D.

1989-01-01

The Space Station Freedom Power System will make extensive use of photovoltaic (PV) power generation. The phase 1 power system consists of two PV power modules each capable of delivering 37.5 KW of conditioned power to the user. Each PV module consists of two solar arrays. Each solar array is made up of two solar blankets. Each solar blanket contains 82 PV panels. The PV power modules provide a 160 V nominal operating voltage. Previous research has shown that there are electrical interactions between a plasma environment and a photovoltaic power source. The interactions take two forms: parasitic current loss (occurs when the currect produced by the PV panel leaves at a high potential point and travels through the plasma to a lower potential point, effectively shorting that portion of the PV panel); and arcing (occurs when the PV panel electrically discharges into the plasma). The PV solar array panel plasma interaction test was conceived to evaluate the effects of these interactions on the Space Station Freedom type PV panels as well as to conduct further research. The test article consists of two active solar array panels in series. Each panel consists of two hundred 8 cm x 8 cm silicon solar cells. The test requirements dictated specifications in the following areas: plasma environment/plasma sheath; outgassing; thermal requirements; solar simulation; and data collection requirements.

We still fail to account for Mendel's observations.

PubMed

Porteous, John W

2004-08-16

The present article corrects common textbook accounts of Mendel's experiments by re-establishing what he wrote and how he accounted for his observations. It notes the long-established tests for the validity of any explanations that purport to explain observations obtained by experiment. Application of these tests to Mendel's paper shows that the arguments he used to explain his observations were internally consistent but were, on one crucial issue, implausible. The same tests are applied to the currently accepted explanation for Mendel's observations. The currently favoured explanation for Mendel's observations is untenable. It misrepresents Mendel, fails to distinguish between the parameters and the variables of any system of interacting components, its arguments are inconsistent, it repeats the implausibility in Mendel's paper, fails to give a rational explanation for his observed 3:1 trait ratio and cannot explain why this ratio is not always observed in experimental practice. A rational explanation for Mendel's observations is initiated. Readers are challenged to complete the process before a further article appears.

Unusual clustering of coefficients of variation in published articles from a medical biochemistry department in India.

PubMed

Hudes, Mark L; McCann, Joyce C; Ames, Bruce N

2009-03-01

A simple statistical method is described to test whether data are consistent with minimum statistical variability expected in a biological experiment. The method is applied to data presented in data tables in a subset of 84 articles among more than 200 published by 3 investigators in a small medical biochemistry department at a major university in India and to 29 "control" articles selected by key word PubMed searches. Major conclusions include: 1) unusual clustering of coefficients of variation (CVs) was observed for data from the majority of articles analyzed that were published by the 3 investigators from 2000-2007; unusual clustering was not observed for data from any of their articles examined that were published between 1992 and 1999; and 2) among a group of 29 control articles retrieved by PubMed key word, title, or title/abstract searches, unusually clustered CVs were observed in 3 articles. Two of these articles were coauthored by 1 of the 3 investigators, and 1 was from the same university but a different department. We are unable to offer a statistical or biological explanation for the unusual clustering observed.

The validity of three tests of temperament in guppies (Poecilia reticulata).

PubMed

Burns, James G

2008-11-01

Differences in temperament (consistent differences among individuals in behavior) can have important effects on fitness-related activities such as dispersal and competition. However, evolutionary ecologists have put limited effort into validating their tests of temperament. This article attempts to validate three standard tests of temperament in guppies: the open-field test, emergence test, and novel-object test. Through multiple reliability trials, and comparison of results between different types of test, this study establishes the confidence that can be placed in these temperament tests. The open-field test is shown to be a good test of boldness and exploratory behavior; the open-field test was reliable when tested in multiple ways. There were problems with the emergence test and novel-object test, which leads one to conclude that the protocols used in this study should not be considered valid tests for this species. (PsycINFO Database Record (c) 2008 APA, all rights reserved).

Test for Chemical Induction of Chromosome Aberrations in Cultured Chinese Hamster Ovary (CHO) Cells With and Without Metabolic Activation. Test Article: Dimethylamine-2-2ethyl azide (DMAZ)

DTIC Science & Technology

2008-07-26

cultures at each concentration level were treated for 3 hours in serum-free medium containing phenobarbital !B-naphthoflavone-induced rat liver S-9...Research Laboratories and it consisted of phenobarbital -S,6-Benzoflavone (phenobarbitallB-naphthoflavone) -induced rat liver homogenate (S-9 fraction...Content: 4. Inducing Agent: S. Storage Condition: 6. Expiration Date: Moltox 2147 31.0 mg/rnL Phenobarbital -S,6-Benzoflavone < -70°C April

Window acoustic study for advanced turboprop aircraft

NASA Technical Reports Server (NTRS)

Prydz, R. A.; Balena, F. J.

1984-01-01

An acoustic analysis was performed to establish window designs for advanced turboprop powered aircraft. The window transmission loss requirements were based on A-weighted interior noise goals of 80 and 75 dBA. The analytical results showed that a triple pane window consisting of two glass outer panes and an inner pane of acrylic would provide the required transmission loss and meet the sidewall space limits. Two window test articles were fabricated for laboratory evaluation and verification of the predicted transmission loss. Procedures for performing laboratory tests are presented.

Outcomes Definitions and Statistical Tests in Oncology Studies: A Systematic Review of the Reporting Consistency.

PubMed

Rivoirard, Romain; Duplay, Vianney; Oriol, Mathieu; Tinquaut, Fabien; Chauvin, Franck; Magne, Nicolas; Bourmaud, Aurelie

2016-01-01

Quality of reporting for Randomized Clinical Trials (RCTs) in oncology was analyzed in several systematic reviews, but, in this setting, there is paucity of data for the outcomes definitions and consistency of reporting for statistical tests in RCTs and Observational Studies (OBS). The objective of this review was to describe those two reporting aspects, for OBS and RCTs in oncology. From a list of 19 medical journals, three were retained for analysis, after a random selection: British Medical Journal (BMJ), Annals of Oncology (AoO) and British Journal of Cancer (BJC). All original articles published between March 2009 and March 2014 were screened. Only studies whose main outcome was accompanied by a corresponding statistical test were included in the analysis. Studies based on censored data were excluded. Primary outcome was to assess quality of reporting for description of primary outcome measure in RCTs and of variables of interest in OBS. A logistic regression was performed to identify covariates of studies potentially associated with concordance of tests between Methods and Results parts. 826 studies were included in the review, and 698 were OBS. Variables were described in Methods section for all OBS studies and primary endpoint was clearly detailed in Methods section for 109 RCTs (85.2%). 295 OBS (42.2%) and 43 RCTs (33.6%) had perfect agreement for reported statistical test between Methods and Results parts. In multivariable analysis, variable "number of included patients in study" was associated with test consistency: aOR (adjusted Odds Ratio) for third group compared to first group was equal to: aOR Grp3 = 0.52 [0.31-0.89] (P value = 0.009). Variables in OBS and primary endpoint in RCTs are reported and described with a high frequency. However, statistical tests consistency between methods and Results sections of OBS is not always noted. Therefore, we encourage authors and peer reviewers to verify consistency of statistical tests in oncology studies.

Outcomes Definitions and Statistical Tests in Oncology Studies: A Systematic Review of the Reporting Consistency

PubMed Central

Rivoirard, Romain; Duplay, Vianney; Oriol, Mathieu; Tinquaut, Fabien; Chauvin, Franck; Magne, Nicolas; Bourmaud, Aurelie

2016-01-01

Background Quality of reporting for Randomized Clinical Trials (RCTs) in oncology was analyzed in several systematic reviews, but, in this setting, there is paucity of data for the outcomes definitions and consistency of reporting for statistical tests in RCTs and Observational Studies (OBS). The objective of this review was to describe those two reporting aspects, for OBS and RCTs in oncology. Methods From a list of 19 medical journals, three were retained for analysis, after a random selection: British Medical Journal (BMJ), Annals of Oncology (AoO) and British Journal of Cancer (BJC). All original articles published between March 2009 and March 2014 were screened. Only studies whose main outcome was accompanied by a corresponding statistical test were included in the analysis. Studies based on censored data were excluded. Primary outcome was to assess quality of reporting for description of primary outcome measure in RCTs and of variables of interest in OBS. A logistic regression was performed to identify covariates of studies potentially associated with concordance of tests between Methods and Results parts. Results 826 studies were included in the review, and 698 were OBS. Variables were described in Methods section for all OBS studies and primary endpoint was clearly detailed in Methods section for 109 RCTs (85.2%). 295 OBS (42.2%) and 43 RCTs (33.6%) had perfect agreement for reported statistical test between Methods and Results parts. In multivariable analysis, variable "number of included patients in study" was associated with test consistency: aOR (adjusted Odds Ratio) for third group compared to first group was equal to: aOR Grp3 = 0.52 [0.31–0.89] (P value = 0.009). Conclusion Variables in OBS and primary endpoint in RCTs are reported and described with a high frequency. However, statistical tests consistency between methods and Results sections of OBS is not always noted. Therefore, we encourage authors and peer reviewers to verify consistency of statistical tests in oncology studies. PMID:27716793

Development and validation of a new questionnaire for the assessment of subjective physical performance in adult patients with haemophilia--the HEP-Test-Q.

PubMed

von Mackensen, S; Czepa, D; Herbsleb, M; Hilberg, T

2010-01-01

Specific research studies for the investigation of physical performance in haemophilic patients are rare. However, these instruments become increasingly more important to evaluate therapeutic treatments. Within the frame of the Haemophilia & Exercise Project (HEP), a new questionnaire, namely HEP-Test-Q, has been developed for the assessment of subjective physical performance in haemophilic adults. In this article, the development and validation of the HEP-Test-Q is described. The development consisted of different phases including item collection, pilot testing and field testing. The preliminary version was pilot-tested in 24 German HEP-participants. Following evaluation and preliminary psychometric analysis, the HEP-Test-Q was revised. The final version consists of 25 items pertaining to the domains 'mobility', 'strength & coordination', 'endurance' and 'body perception', which was administered to 43 German haemophilic patients (43.8 +/- 11.2 years). Psychometric analysis included reliability and validity testing. Convergent validity was tested correlating the HEP-Test-Q with SF-36, Haem-A-QoL, HAL and the Orthopaedic Joint Score. Discriminant validity tested different clinical subgroups. Patients accepted the questionnaire and found it easy to fill in. Psychometric testing revealed good values for reliability in terms of internal consistency (Cronbach's alpha = 0.96) and test-retest reliability (r = 0.90) as well as for convergent validity correlating highly with Haem-A-QoL, HAL and SF-36. Discriminant validity testing showed significant differences for age, hepatitis A and hepatitis B and the number of target joints. HEP-Test-Q is a short and well-accepted questionnaire, assessing subjective physical performance of haemophiliacs, which might be combined with objective assessments to reveal aspects, which cannot be measured objectively, such as body perception.

Structural Analysis and Test Comparison of a 20-Meter Inflation-Deployed Solar Sail

NASA Technical Reports Server (NTRS)

Sleight, David W.; Mann, Troy; Lichodziejewski, David; Derbes, Billy

2006-01-01

Under the direction of the NASA In-Space Propulsion Technology Office, the team of L Garde, NASA Jet Propulsion Laboratory, Ball Aerospace, and NASA Langley Research Center has been developing a scalable solar sail configuration to address NASA s future space propulsion needs. Prior to a flight experiment of a full-scale solar sail, a comprehensive test program was implemented to advance the technology readiness level of the solar sail design. These tests consisted of solar sail component, subsystem, and sub-scale system ground tests that simulated the aspects of the space environment such as vacuum and thermal conditions. In July 2005, a 20-m four-quadrant solar sail system test article was tested in the NASA Glenn Research Center s Space Power Facility to measure its static and dynamic structural responses. Key to the maturation of solar sail technology is the development of validated finite element analysis (FEA) models that can be used for design and analysis of solar sails. A major objective of the program was to utilize the test data to validate the FEA models simulating the solar sail ground tests. The FEA software, ABAQUS, was used to perform the structural analyses to simulate the ground tests performed on the 20-m solar sail test article. This paper presents the details of the FEA modeling, the structural analyses simulating the ground tests, and a comparison of the pretest and post-test analysis predictions with the ground test results for the 20-m solar sail system test article. The structural responses that are compared in the paper include load-deflection curves and natural frequencies for the beam structural assembly and static shape, natural frequencies, and mode shapes for the solar sail membrane. The analysis predictions were in reasonable agreement with the test data. Factors that precluded better correlation of the analyses and the tests were unmeasured initial conditions in the test set-up.

Expanding the Reach of Participatory Risk Management: Testing an Online Decision-Aiding Framework for Informing Internally Consistent Choices.

PubMed

Bessette, Douglas L; Campbell-Arvai, Victoria; Arvai, Joseph

2016-05-01

This article presents research aimed at developing and testing an online, multistakeholder decision-aiding framework for informing multiattribute risk management choices associated with energy development and climate change. The framework was designed to provide necessary background information and facilitate internally consistent choices, or choices that are in line with users' prioritized objectives. In order to test different components of the decision-aiding framework, a six-part, 2 × 2 × 2 factorial experiment was conducted, yielding eight treatment scenarios. The three factors included: (1) whether or not users could construct their own alternatives; (2) the level of detail regarding the composition of alternatives users would evaluate; and (3) the way in which a final choice between users' own constructed (or highest-ranked) portfolio and an internally consistent portfolio was presented. Participants' self-reports revealed the framework was easy to use and providing an opportunity to develop one's own risk-management alternatives (Factor 1) led to the highest knowledge gains. Empirical measures showed the internal consistency of users' decisions across all treatments to be lower than expected and confirmed that providing information about alternatives' composition (Factor 2) resulted in the least internally consistent choices. At the same time, those users who did not develop their own alternatives and were not shown detailed information about the composition of alternatives believed their choices to be the most internally consistent. These results raise concerns about how the amount of information provided and the ability to construct alternatives may inversely affect users' real and perceived internal consistency. © 2015 Society for Risk Analysis.

The appropriateness of the NC state-mandated reading competency test for deaf students as a criterion for high school graduation.

PubMed

Lollis, Jana; LaSasso, Carol

2009-01-01

Deaf students consistently score lower on standardized measures of reading comprehension than their hearing peers. Most of the studies that have been conducted to explain this phenomenon have focused on variables within the reader, and important differences have been found between deaf and hearing readers. More recently, in the face of increasingly high-stakes consequences, researchers are looking "outside" the reader, at the tests themselves, to determine whether there are fairness issues for special populations, such as deaf students. The study reported here, the first of its kind with deaf students, examines the North Carolina (NC) reading comprehension test. The study employs the same method used originally by NC to determine its appropriateness of the test for the general population of NC students. The experts in this article, like those in the original construction of the NC test, are familiar with the content of the reading curriculum in NC; however, the raters in this article bring a special perspective related to teaching and testing reading of students who are deaf. Findings from this study raise questions about the appropriateness of the NC reading test for deaf students. Implications for future research and instructional practice are discussed.

Read all about it: the over-representation of breast cancer in popular magazines.

PubMed

Blanchard, Deena; Erblich, Joel; Montgomery, Guy H; Bovbjerg, Dana H

2002-10-01

While women are far more likely to develop and die from cardiovascular disease (CVD) than breast cancer, research has shown that they markedly overestimate their personal risks of breast cancer and underestimate their CVD risks. The source of this disparity is not yet known, although increased media attention to breast cancer relative to CVD has been suggested to play a role. The purpose of the present study was to provide a first critical test of this possibility. Two hypotheses were tested: (a) the number of breast cancer articles would be greater than the number of CVD articles; and (b) this disparity in coverage would increase over the years. A web-based search engine was used to quantify all breast cancer and cardiovascular disease articles (keyword search) in 73 popular magazines on a annual basis for a 10-year interval (1990-1999). Consistent with study hypotheses, breast cancer articles outnumbered CVD articles, and this disparity widened over the years (P < 0.0001). This disparity was not limited to specific magazine categories (e.g., women's interest). Over-representation of breast cancer vis-a-vis CVD is pervasive in popular magazines. Future research should investigate how such disparities in the media may influence risk perceptions, adoption of preventive health behaviors, and compliance with screening guidelines. Copyright 2002 American Health Foundation and Elsevier Science (USA)

Design, Analysis and Fabrication of Secondary Structural Components for the Habitat Demonstration Unit-Deep Space Habitat

NASA Technical Reports Server (NTRS)

Smith, Russell W.; Langford, William M.

2012-01-01

In support of NASA s Habitat Demonstration Unit - Deep Space Habitat Prototype, a number of evolved structural sections were designed, fabricated, analyzed and installed in the 5 meter diameter prototype. The hardware consisted of three principal structural sections, and included the development of novel fastener insert concepts. The articles developed consisted of: 1) 1/8th of the primary flooring section, 2) an inner radius floor beam support which interfaced with, and supported (1), 3) two upper hatch section prototypes, and 4) novel insert designs for mechanical fastener attachments. Advanced manufacturing approaches were utilized in the fabrication of the components. The structural components were developed using current commercial aircraft constructions as a baseline (for both the flooring components and their associated mechanical fastener inserts). The structural sections utilized honeycomb sandwich panels. The core section consisted of 1/8th inch cell size Nomex, at 9 lbs/cu ft, and which was 0.66 inches thick. The facesheets had 3 plys each, with a thickness of 0.010 inches per ply, made from woven E-glass with epoxy reinforcement. Analysis activities consisted of both analytical models, as well as initial closed form calculations. Testing was conducted to help verify analysis model inputs, as well as to facilitate correlation between testing and analysis. Test activities consisted of both 4 point bending tests as well as compressive core crush sequences. This paper presents an overview of this activity, and discusses issues encountered during the various phases of the applied research effort, and its relevance to future space based habitats.

A Response to Odland et al.'s Misleading, Alarmist Estimates of Risk for Overpathologizing when Interpreting the MMPI-2-RF.

PubMed

Tarescavage, Anthony M; Ben-Porath, Yossef S

2015-01-01

In a recently published article in this journal, Odland, Lammy, Perle, Martin, and Grote report Monte Carlo-simulated normative base rates of scale elevations on the Minnesota Multiphasic Personality Inventory-2-Restructured Form (MMPI-2-RF). Their primary conclusion--reflected in the title of their article--is that MMPI-2-RF interpretation is associated with "high risk of pathologizing healthy adults" when the 40 substantive scales of the test are simultaneously interpreted. In this paper, we describe how their conclusion follows from several faulty premises, three of which were already debunked in an earlier article and remain false despite counterarguments proposed by Odland and colleagues. We also address these authors' misinterpretation of their analyses and, furthermore, their premise that MMPI-2-RF interpretive guidelines are flawed because they "currently do not account for a basic statistical principle: Type I (or alpha) error inflation" (p. 1). This premise is irrelevant to psychological test interpretation and misaligned with neuropsychological testing literature cited in support of it. Consistent with suggestions by some of the authors they cite, we reiterate MMPI-2-RF interpretive guidelines designed to mitigate the impact of measurement error (not alpha error) by way of a scientific assessment approach that relies on integration of information derived from multiple sources.

Media Reporting of Health Interventions in New Zealand: A Retrospective Analysis.

PubMed

Robinson, Christian; Cutfield, Nick; Mottershead, John; Sharples, Assoc Prof Katrina; Richards, Rosalina; Kingan, Jason; Ledgard, Celina; Liyanage, Anuja; McLean, Jennifer; Nahab, Fouad; Stewart, Fergus; Strachan, Samuel; Tucker, Kathryn; Zhang, Zhiyuan

2018-04-16

To evaluate New Zealand media articles on their coverage of key issues regarding health interventions and whether it is consistent with available evidence. A retrospective analysis was carried out of all articles published in five New Zealand media sources over a six-week period between 15 October and 26 November 2014. Articles were included if their primary focus was on health interventions involving medications, devices or in-hospital procedures. Articles were assessed for coverage of key issues using a previously validated ten-point criteria. A literature review was done to compare content with scientific evidence. We identified 30 articles for review. Only 4 out of 30 articles covered indications, benefits and risks, and of these 2 were consistent with available evidence (7%, 95% CI (1% to 22%). For articles that discussed at least one of indications, benefits or risks, and there was corresponding evidence available, there was a high level of consistency with the evidence (89%, 95% CI (77% to 95%)). The overall mean value of coverage from the ten point criteria was 51% (95% CI 45% to 58%)). Single questions regarding the potential harm, costs associated with the intervention and the availability of alternative options were particularly poorly covered. They were rated as "satisfactory" in 13%, 23% and 33% of the 30 articles respectively. New Zealand news articles covering medical treatments and interventions are largely consistent with available evidence but are incomplete. Vital information is being consistently missed, especially around the potential harms and costs of medical interventions. This article is protected by copyright. All rights reserved.

Proceedings of the USAF Structural Integrity Program Conference Held in San Antonio, Texas on 2-6 December 1991

DTIC Science & Technology

1992-07-01

NONDESTRUCTIVE INSPECTION Probabilistic Durability Evaluation of Alcoa 7050 Aluminum ............................... 305 Composite Repair of Aircraft Structures... Aluminum J.G. Burns, WLIFIBEC 0900-0930 Composite Repair of Aircraft Structures - The Australian Experience L. Molent, Aeronautical Research Laboratory...fatigue test articles consisted of a of 5 percent from the calculated airframe ratio of 2124-T851 aluminum specimen surrounded by 0.882, to preclude

Virtual Evidence Cart - RP (VEC-RP).

PubMed

Liu, Fang; Fontelo, Paul; Muin, Michael; Ackerman, Michael

2005-01-01

VEC-RP (Virtual Evident Cart) is an open, Web-based, searchable collection of clinical questions and relevant references from MEDLINE/PubMed for healthcare professionals. The architecture consists of four parts: clinical questions, relevant articles from MEDLINE/PubMed, "bottom-line" answers, and peer reviews of entries. Only registered users can add reviews but unregistered users can read them. Feedback from physicians, mostly in the Philippines (RP) who tested the system, is positive.

Score Reliability and Validity of the Student Risk Screening Scale: A Psychometrically Sound, Feasible Tool for Use in Urban Middle Schools

ERIC Educational Resources Information Center

Lane, Kathleen Lynne; Bruhn, Allison L.; Eisner, Shanna L.; Kalberg, Jemma Robertson

2010-01-01

In this article, the authors examine the psychometric properties of the "Student Risk Screening Scale" (SRSS) for use in urban middle schools. Results of Studies 1 and 2 suggest strong internal consistency and test-retest stability. Study 1 supports the predictive validity of the SRSS, with students at low risk being able to be differentiated from…

Effects of sleep manipulation on cognitive functioning of adolescents: A systematic review.

PubMed

de Bruin, Eduard J; van Run, Chris; Staaks, Janneke; Meijer, Anne Marie

2017-04-01

Adolescents are considered to be at risk for deteriorated cognitive functioning due to insufficient sleep. This systematic review examined the effects of experimental sleep manipulation on adolescent cognitive functioning. Sleep manipulations consisted of total or partial sleep restriction, sleep extension, and sleep improvement. Only articles written in English, with participants' mean age between 10 and 19 y, using objective sleep measures and cognitive performance as outcomes were included. Based on these criteria 16 articles were included. The results showed that the sleep manipulations were successful. Partial sleep restriction had small or no effects on adolescent cognitive functioning. Sleep deprivation studies showed decrements in the psychomotor vigilance task as most consistent finding. Sleep extension and sleep improvement contributed to improvement of working memory. Sleep directly after learning improved memory consolidation. Due to the great diversity of tests and lack of coherent results, decisive conclusions could not be drawn about which domains in particular were influenced by sleep manipulation. Small number of participants, not accounting for the role of sleep quality, individual differences in sleep need, compensatory mechanisms in adolescent sleep and cognitive functioning, and the impurity problem of cognitive tests might explain the absence of more distinct results. Copyright © 2016 Elsevier Ltd. All rights reserved.

Methodological strategies in using home sleep apnea testing in research and practice.

PubMed

Miller, Jennifer N; Schulz, Paula; Pozehl, Bunny; Fiedler, Douglas; Fial, Alissa; Berger, Ann M

2017-11-14

Home sleep apnea testing (HSAT) has increased due to improvements in technology, accessibility, and changes in third party reimbursement requirements. Research studies using HSAT have not consistently reported procedures and methodological challenges. This paper had two objectives: (1) summarize the literature on use of HSAT in research of adults and (2) identify methodological strategies to use in research and practice to standardize HSAT procedures and information. Search strategy included studies of participants undergoing sleep testing for OSA using HSAT. MEDLINE via PubMed, CINAHL, and Embase with the following search terms: "polysomnography," "home," "level III," "obstructive sleep apnea," and "out of center testing." Research articles that met inclusion criteria (n = 34) inconsistently reported methods and methodological challenges in terms of: (a) participant sampling; (b) instrumentation issues; (c) clinical variables; (d) data processing; and (e) patient acceptability. Ten methodological strategies were identified for adoption when using HSAT in research and practice. Future studies need to address the methodological challenges summarized in this paper as well as identify and report consistent HSAT procedures and information.

Force Limited Random Vibration Test of TESS Camera Mass Model

NASA Technical Reports Server (NTRS)

Karlicek, Alexandra; Hwang, James Ho-Jin; Rey, Justin J.

2015-01-01

The Transiting Exoplanet Survey Satellite (TESS) is a spaceborne instrument consisting of four wide field-of-view-CCD cameras dedicated to the discovery of exoplanets around the brightest stars. As part of the environmental testing campaign, force limiting was used to simulate a realistic random vibration launch environment. While the force limit vibration test method is a standard approach used at multiple institutions including Jet Propulsion Laboratory (JPL), NASA Goddard Space Flight Center (GSFC), European Space Research and Technology Center (ESTEC), and Japan Aerospace Exploration Agency (JAXA), it is still difficult to find an actual implementation process in the literature. This paper describes the step-by-step process on how the force limit method was developed and applied on the TESS camera mass model. The process description includes the design of special fixtures to mount the test article for properly installing force transducers, development of the force spectral density using the semi-empirical method, estimation of the fuzzy factor (C2) based on the mass ratio between the supporting structure and the test article, subsequent validating of the C2 factor during the vibration test, and calculation of the C.G. accelerations using the Root Mean Square (RMS) reaction force in the spectral domain and the peak reaction force in the time domain.

Test for Chemical Induction of Chromosome Aberrations in Cultured Chinese Hamster Ovary (CHO) Cells with and without Metabolic Activation, Test Article: 3-Nitro-1,2,4-Triazol-5-one (NTO)

DTIC Science & Technology

2008-10-30

it consisted of phenobarbital -5,6-Benzoflavone (phenobarbitallB-naphthoflavone) -induced rat liver homogenate (S-9 fraction) and the cofactor pool...5. Storage Condition: 6. Expiration Date: Moltox 2059 32.1 mglmL (Lot No.: 2059) Phenobarbital -5,6-Benzoflavone <-70°C September 7,2008 (Lot...mL PREPARATION DATE: September 7. 2006 EXPIRATION DATE: September 7. 2008 BUllFER: O.lS4MKCl INDUCING AGENT(s): Phenobarbital • 5,6·Benzoflavone

Stature and jumping height are required in female volleyball, but motor coordination is a key factor for future elite success.

PubMed

Pion, Johan A; Fransen, Job; Deprez, Dieter N; Segers, Veerle I; Vaeyens, Roel; Philippaerts, Renaat M; Lenoir, Matthieu

2015-06-01

It was hypothesized that differences in anthropometry, physical performance, and motor coordination would be found between Belgian elite and sub-elite level female volleyball players using a retrospective analysis of test results gathered over a 5-year period. The test sample in this study consisted of 21 young female volleyball players (15.3 ± 1.5 years) who were selected to train at the Flemish Top Sports Academy for Volleyball in 2008. All players (elite, n = 13; sub-elite, n = 8) were included in the same talent development program, and the elite-level athletes were of a high to very high performance levels according to European competition level in 2013. Five multivariate analyses of variance were used. There was no significant effect of playing level on measures of anthropometry (F = 0.455, p = 0.718, (Equation is included in full-text article.)= 0.07), flexibility (F = 1.861, p = 0.188, (Equation is included in full-text article.)= 0.19), strength (F = 1.218, p = 0.355, (Equation is included in full-text article.)= 0.32); and speed and agility (F = 1.176, p = 0.350, (Equation is included in full-text article.)= 0.18). Multivariate analyses of variance revealed significant multivariate effects between playing levels for motor coordination (F = 3.470, p = 0.036, (Equation is included in full-text article.)= 0.59). A Mann-Whitney U test and a sequential discriminant analysis confirmed these results. Previous research revealed that stature and jump height are prerequisites for talent identification in female volleyball. In addition, the results show that motor coordination is an important factor in determining inclusion into the elite level in female volleyball.

Nondestructive Methods and Special Test Instrumentation Supporting NASA Composite Overwrapped Pressure Vessel Assessments

NASA Technical Reports Server (NTRS)

Saulsberry, Regor; Greene, Nathanael; Cameron, Ken; Madaras, Eric; Grimes-Ledesma, Lorie; Thesken, John; Phoenix, Leigh; Murthy, Pappu; Revilock, Duane

2007-01-01

Many aging composite overwrapped pressure vessels (COPVs), being used by the National Aeronautics and Space Administration (NASA) are currently under evaluation to better quantify their reliability and clarify their likelihood of failure due to stress rupture and age-dependent issues. As a result, some test and analysis programs have been successfully accomplished and other related programs are still in progress at the NASA Johnson Space Center (JSC) White Sands Test Facility (WSTF) and other NASA centers, with assistance from the commercial sector. To support this effort, a group of Nondestructive Evaluation (NDE) experts was assembled to provide NDE competence for pretest evaluation of test articles and for application of NDE technology to real-time testing. Techniques were required to provide assurance that the test article had adequate structural integrity and manufacturing consistency to be considered acceptable for testing and these techniques were successfully applied. Destructive testing is also being accomplished to better understand the physical and chemical property changes associated with progression toward "stress rupture" (SR) failure, and it is being associated with NDE response, so it can potentially be used to help with life prediction. Destructive work also includes the evaluation of residual stresses during dissection of the overwrap, laboratory evaluation of specimens extracted from the overwrap to evaluate physical property changes, and quantitative microscopy to inform the theoretical micromechanics.

Vertical Drop Testing and Analysis of the WASP Helicopter Skid Gear

NASA Technical Reports Server (NTRS)

Fuchs, Yvonne T.; Jackson, Karen E.

2008-01-01

Human occupant modeling and injury risk assessment have been identified as areas of research for improved prediction of rotorcraft crashworthiness within the NASA Aeronautics Program's Subsonic Rotary Wing Project. As part of this effort, an experimental program was conducted to assess the impact performance of a skid gear for use on the WASP kit-built helicopter, which is marketed by HeloWerks, Inc. of Hampton, Virginia. Test data from a drop test at an impact velocity of 8.4 feet-per-second were used to assess a finite element model of the skid gear test article. This assessment included human occupant analytic models developed for execution in LS-DYNA. The test article consisted of an aluminum skid gear mounted beneath a steel plate. A seating platform was attached to the upper surface of the steel plate, and two 95th percentile Hybrid III male Aerospace Anthropomorphic Test Devices (ATDs) were seated on the platform and secured using a four-point restraint system. The goal of the test-analysis correlation is to further the understanding of LS-DYNA ATD occupant models and responses in the vertical (or spinal) direction. By correlating human occupant experimental test data for a purely vertical impact with the LS-DYNA occupant responses, improved confidence in the use of these tools and better understanding of the limitations of the automotive-based occupant models for aerospace application can begin to be developed.

Vertical Drop Testing and Analysis of the WASP Helicopter Skid Gear

NASA Technical Reports Server (NTRS)

Fuchs, Yvonne T.; Jackson, Karen E.

2008-01-01

Human occupant modeling and injury risk assessment have been identified as areas of research for improved prediction of rotorcraft crashworthiness within the NASA Aeronautics Program s Subsonic Rotary Wing Project. As part of this effort, an experimental program was conducted to assess the impact performance of a skid gear for use on the WASP kit-built helicopter, which is marketed by HeloWerks, Inc. of Hampton, Virginia. Test data from a drop test at an impact velocity of 8.4 feet-per-second were used to assess a finite element model of the skid gear test article. This assessment included human occupant analytic models developed for execution in LS-DYNA. The test article consisted of an aluminum skid gear mounted beneath a steel plate. A seating platform was attached to the upper surface of the steel plate, and two 95th percentile Hybrid III male Aerospace Anthropomorphic Test Devices (ATDs) were seated on the platform and secured using a four-point restraint system. The goal of the test-analysis correlation is to further the understanding of LS-DYNA ATD occupant models and responses in the vertical (or spinal) direction. By correlating human occupant experimental test data for a purely vertical impact with the LS-DYNA occupant responses, improved confidence in the use of these tools and better understanding of the limitations of the automotive-based occupant models for aerospace application can begin to be developed.

Utilization of the waste from the marble industry for application in transport infrastructure: mechanical properties of cement pastes

NASA Astrophysics Data System (ADS)

Prošek, Zdeněk; Trejbal, Jan; Topič, Jaroslav; Plachý, Tomáš; Tesárek, Pavel

2017-09-01

This article is focused on the mechanical testing of cement-based samples containing a micronized waste marble powder used as replacement of standard binders. Tested materials consisted of cement CEM I 42.5 R (Radotín, Czech Republic) and three different amounts of the marbles (25, 50 and 70 wt. %). Standard bending and compressive tests of the prismatic samples having dimensions equal to 40 × 40 × 160 mm were done in order to reveal an influence of marble amount on flexural and compressive strength, respectively. Moreover, the dynamic modulus of elasticity and dynamic shear modulus were examined and compared after 7 and 28 days of mixture curing.

Small Projects Rapid Integration and Test Environment (SPRITE): Application for Increasing Robustness

NASA Technical Reports Server (NTRS)

Rakoczy, John; Heater, Daniel; Lee, Ashley

2013-01-01

Marshall Space Flight Center's (MSFC) Small Projects Rapid Integration and Test Environment (SPRITE) is a Hardware-In-The-Loop (HWIL) facility that provides rapid development, integration, and testing capabilities for small projects (CubeSats, payloads, spacecraft, and launch vehicles). This facility environment focuses on efficient processes and modular design to support rapid prototyping, integration, testing and verification of small projects at an affordable cost, especially compared to larger type HWIL facilities. SPRITE (Figure 1) consists of a "core" capability or "plant" simulation platform utilizing a graphical programming environment capable of being rapidly re-configured for any potential test article's space environments, as well as a standard set of interfaces (i.e. Mil-Std 1553, Serial, Analog, Digital, etc.). SPRITE also allows this level of interface testing of components and subsystems very early in a program, thereby reducing program risk.

J-2X installation on A-1

NASA Image and Video Library

2007-09-20

Core components of the J-2X engine being designed for NASA's Constellation Program recently were installed on the A-1 Test Stand at NASA's Stennis Space Center near Bay St. Louis, Miss. Tests of the components, known as Powerpack 1A, will be conducted from November 2007 through February 2008. The Powerpack 1A test article consists of a gas generator and engine turbopumps originally developed for the Apollo Program that put Americans on the moon in the late 1960s and early 1970s. Engineers are testing these heritage components to obtain data that will help them modify the turbomachinery to meet the higher performance requirements of the Ares I and Ares V launch vehicles. The upcoming tests will simulate inlet and outlet conditions that would be present on the turbomachinery during a full-up engine hot-fire test.

Exhaust-gas measurements from NASAs HYMETS arc jet.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Paul Albert

Arc-jet wind tunnels produce conditions simulating high-altitude hypersonic flight such as occurs upon entry of space craft into planetary atmospheres. They have traditionally been used to study flight in Earth's atmosphere, which consists mostly of nitrogen and oxygen. NASA is presently using arc jets to study entry into Mars' atmosphere, which consists of carbon dioxide and nitrogen. In both cases, a wide variety of chemical reactions take place among the gas constituents and with test articles placed in the flow. In support of those studies, we made measurements using a residual gas analyzer (RGA) that sampled the exhaust stream ofmore » a NASA arc jet. The experiments were conducted at the HYMETS arc jet (Hypersonic Materials Environmental Test System) located at the NASA Langley Research Center, Hampton, VA. This report describes our RGA measurements, which are intended to be used for model validation in combination with similar measurements on other systems.« less

Optical transmission testing based on asynchronous sampling techniques: images analysis containing chromatic dispersion using convolutional neural network

NASA Astrophysics Data System (ADS)

Mrozek, T.; Perlicki, K.; Tajmajer, T.; Wasilewski, P.

2017-08-01

The article presents an image analysis method, obtained from an asynchronous delay tap sampling (ADTS) technique, which is used for simultaneous monitoring of various impairments occurring in the physical layer of the optical network. The ADTS method enables the visualization of the optical signal in the form of characteristics (so called phase portraits) that change their shape under the influence of impairments such as chromatic dispersion, polarization mode dispersion and ASE noise. Using this method, a simulation model was built with OptSim 4.0. After the simulation study, data were obtained in the form of images that were further analyzed using the convolutional neural network algorithm. The main goal of the study was to train a convolutional neural network to recognize the selected impairment (distortion); then to test its accuracy and estimate the impairment for the selected set of test images. The input data consisted of processed binary images in the form of two-dimensional matrices, with the position of the pixel. This article focuses only on the analysis of images containing chromatic dispersion.

Dynamic Identification for Control of Large Space Structures

NASA Technical Reports Server (NTRS)

Ibrahim, S. R.

1985-01-01

This is a compilation of reports by the one author on one subject. It consists of the following five journal articles: (1) A Parametric Study of the Ibrahim Time Domain Modal Identification Algorithm; (2) Large Modal Survey Testing Using the Ibrahim Time Domain Identification Technique; (3) Computation of Normal Modes from Identified Complex Modes; (4) Dynamic Modeling of Structural from Measured Complex Modes; and (5) Time Domain Quasi-Linear Identification of Nonlinear Dynamic Systems.

Azoospermia in rabbits following an intravas injection of Vasalgel ™.

PubMed

Waller, Donald; Bolick, David; Lissner, Elaine; Premanandan, Christopher; Gamerman, Gary

2016-01-01

Vasectomy is currently the only long-acting contraceptive option available for men, despite increasing demand and potentially significant positive impacts on human health of additional male contraceptive options. Vasalgel ™ is a high molecular weight hydrogel polymer being developed as a non-hormonal long-acting reversible male contraceptive. Vasalgel consists of styrene-alt-maleic acid dissolved in dimethyl sulfoxide, which is distinct from styrene-alt-maleic anhydride materials previously studied. The goal of the study was to determine the contraceptive efficacy of two test articles with different levels of styrene maleic acid (100 %, and 80 % acid/20 % anhydride). The test articles were injected bilaterally in the vasa deferentia of mature male rabbits. Post-implantation analyses of semen parameters were completed over a 12 month period and compared to baseline measures of sperm concentration, motility and forward progression. Both test articles were effective in blocking the passage of spermatozoa through the vasa deferentia in the 12 subjects completing the study. A significant decrease in sperm concentration occurred following implantation of the test material, with no measurable sperm concentration except for a few samples in one animal that were markedly oligospermic. Vasalgel produced a rapid onset of azoospermia, with no sperm in semen samples collected as early as 29-36 days post-implantation, and was durable over a 12 month period. This study indicated that Vasalgel is an effective non-hormonal long-acting male contraceptive in a rabbit model.

Influence of Type 1 Diabetes Mellitus on Women's Nutritional Beliefs and Lifestyle Choices for Themselves and Their Families.

PubMed

Nnedu, Cordelia Chinwe; Gayle, Lynette; Popoola, Sola

2015-12-01

The aim of this research was to examine the impact of type 1 diabetes on women's nutritional beliefs and their lifestyle choices both for themselves and for their families. The data sources used were the online databases of OVID, CINAHL, MEDLINE, PsyINFO, PsyARTICLE, ERIC, Health Source Nursing/Academic edition, and the Centers for Disease Control from January 2000 to 2012. The concentration of the search was to identify literature with the key words "nutrition," "lifestyle," or "women with type 1 diabetes." The researchers found 28 data-based research articles that examined women with type 1 diabetes. The articles were individually scrutinized for relevance and limited to English language articles. Data concerning the nutritional beliefs, lifestyle choices, andfamily dynamics among women with DM1 were extracted. The research articles consisted of 19 qualitative studies, 7 quantitative studies, and 2 theory-testing studies. The themefor the studies included, but was not limited to, birth size, eating disorders, complications of diabetes mellitus, theory testing, documentations of effectiveness, estimations of carbohydrates, weight, changes during pregnancy in women with type 1 diabetes mellitus, and their educational preferences. This integrative review described the effects of DM1 on women's nutritional belief and lifestyle choices. Results demonstrated the importance of education and follow-ups; however, future studies are needed to identify factors that contribute to noncompliance and waysfor patients to comprehend the seriousness of complications that can arise from type 1 diabetes mellitus.

The (mis)reporting of statistical results in psychology journals.

PubMed

Bakker, Marjan; Wicherts, Jelte M

2011-09-01

In order to study the prevalence, nature (direction), and causes of reporting errors in psychology, we checked the consistency of reported test statistics, degrees of freedom, and p values in a random sample of high- and low-impact psychology journals. In a second study, we established the generality of reporting errors in a random sample of recent psychological articles. Our results, on the basis of 281 articles, indicate that around 18% of statistical results in the psychological literature are incorrectly reported. Inconsistencies were more common in low-impact journals than in high-impact journals. Moreover, around 15% of the articles contained at least one statistical conclusion that proved, upon recalculation, to be incorrect; that is, recalculation rendered the previously significant result insignificant, or vice versa. These errors were often in line with researchers' expectations. We classified the most common errors and contacted authors to shed light on the origins of the errors.

Multi-Shock Shield Performance at 15 MJ for Catalogued Debris

NASA Technical Reports Server (NTRS)

Miller, J. E.; Davis, B. A.; Christiansen, E. L.; Lear, D. M.

2015-01-01

While orbital debris of ten centimeters or more are tracked and catalogued, the difficulty of finding and accurately accounting for forces acting on the objects near the ten centimeter threshold results in both uncertainty of their presence and location. These challenges result in difficult decisions for operators balancing potential costly operational approaches with system loss risk. In this paper, the assessment of the feasibility of protecting a spacecraft from this catalogued debris is described using numerical simulations and a test of a multi-shock shield system against a cylindrical projectile impacting normal to the surface with approximately 15 MJ of kinetic energy. The hypervelocity impact test has been conducted at the Arnold Engineering Development Complex (AEDC) with a 598 g projectile at 6.905 km/s on a NASA supplied multi-shock shield. The projectile used is a hollow aluminum and nylon cylinder with an outside diameter of 8.6 cm and length of 10.3 cm. Figure 1 illustrates the multi-shock shield test article, which consisted of five separate bumpers, four of which are fiberglass fabric and one of steel mesh, and two rear walls, each consisting of Kevlar fabric. The overall length of the test article was 2.65 m. The test article was a 5X scaled-up version of a smaller multi-shock shield previously tested using a 1.4 cm diameter aluminum projectile for an inflatable module project. The distances represented by S1 and S1/2 in the figure are 61 cm and 30.5 cm, respectively. Prior to the impact test, hydrodynamic simulations indicated that some enhancement to the standard multi-shock system is needed to address the effects of the cylindrical shape of the projectile. Based on the simulations, a steel mesh bumper has been added to the shield configuration to enhance the fragmentation of the projectile. The AEDC test occurred as planned, and the modified NASA multi-shock shield successfully stopped 598 g projectile using 85.6 kg/m(exp 2). The fifth bumper layer remained in tact, although it was torn free from its support structure and thrown into the first rear wall. The outer Kevlar layer of the first rear wall tore likely from the impact of the fifth bumper's support structure, but the back of the rear wall was intact. No damage occurred to the second rear wall, or to the witness plate behind the target.

Predictors, Moderators, and Mediators of Treatment Outcome Following Manualised Cognitive-Behavioural Therapy for Eating Disorders: A Systematic Review.

PubMed

Linardon, Jake; de la Piedad Garcia, Xochitl; Brennan, Leah

2017-01-01

This systematic review synthesised the literature on predictors, moderators, and mediators of outcome following Fairburn's CBT for eating disorders. Sixty-five articles were included. The relationship between individual variables and outcome was synthesised separately across diagnoses and treatment format. Early change was found to be a consistent mediator of better outcomes across all eating disorders. Moderators were mostly tested in binge eating disorder, and most moderators did not affect cognitive-behavioural treatment outcome relative to other treatments. No consistent predictors emerged. Findings suggest that it is unclear how and for whom this treatment works. More research testing mediators and moderators is needed, and variables selected for analyses need to be empirically and theoretically driven. Future recommendations include the need for authors to (i) interpret the clinical and statistical significance of findings; (ii) use a consistent definition of outcome so that studies can be directly compared; and (iii) report null and statistically significant findings. Copyright © 2016 John Wiley & Sons, Ltd and Eating Disorders Association. © 2016 John Wiley & Sons, Ltd and Eating Disorders Association.

Accuracy of endoscopic and videofluoroscopic evaluations of swallowing for oropharyngeal dysphagia.

PubMed

Giraldo-Cadavid, Luis Fernando; Leal-Leaño, Lorena Renata; Leon-Basantes, Guillermo Alfredo; Bastidas, Alirio Rodrigo; Garcia, Rafael; Ovalle, Sergio; Abondano-Garavito, Jorge E

2017-09-01

A systematic review and meta-analysis of the literature was conducted to compare the accuracy with which flexible endoscopic evaluation of swallowing (FEES) and videofluoroscopic swallowing study (VFSS) assessed oropharyngeal dysphagia in adults. PubMed, Embase, and the Latin American and Caribbean Health Sciences Literature (LILACS) database. A review of published studies was conducted in parallel by two groups of researchers. We evaluated the methodological quality, homogeneity, threshold effect, and publication bias. The results are presented as originally published, then with each test compared against the other as a reference and both compared against a composite reference standard, and then pooled using a random effects model. Software use consisted of Meta-DiSc and SPSS. The search yielded 5,697 articles. Fifty-two articles were reviewed in full text, and six articles were included in the meta-analysis. FEES showed greater sensitivity than VFSS for aspiration (0.88 vs. 0.77; P = .03), penetration (0.97 vs. 0.83; P = .0002), and laryngopharyngeal residues (0.97 vs. 0.80; P < .0001). Sensitivity to detect pharyngeal premature spillage was similar for both tests (VFSS: 0.80; FEES: 0.69; P = .28). The specificities of both tests were similar (range, 0.93-0.98). In the sensitivity analysis there were statistically significant differences between the tests regarding residues but only marginally significant differences regarding aspiration and penetration. FEES had a slight advantage over VFSS to detect aspiration, penetration, and residues. Prospective studies comparing both tests against an appropriate reference standard are needed to define which test has greater accuracy. 2a Laryngoscope, 127:2002-2010, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Feasibility study of an orbiting laboratory for testing CSI technology

NASA Technical Reports Server (NTRS)

Bicos, Andrew S.; Loboda, Gregory G.

1993-01-01

A concept for an orbiting laboratory for testing Controls-Structures Integration (CSI) technology is described. The CSI-Star concept reflects a lower cost, higher risk approach. The concept supports demonstration and validation testing for critical CSI technologies at a cost of $20M to $26M with a 1-year reliability of approximately 0.9. The Ball Aerospace QuickStar bus is the carrier for the CSI test article. QuickStar is launched as a secondary payload on the McDonnell Douglas Delta 2. The QuickStar/Delta 2 approach is flight proven. The CSI test article is a 20 foot, 1 Hz, truss beam which is deployed from the QuickStar bus. The test article is well instrumented for quality system identification. The laboratory provides three layers of active control consisting of global vibration suppression along the truss beam, vibration isolation between the beam and instrument platforms, and vibration compensation through the use of gimbaled platforms which point lasers relative to optical sensor targets. The configuration simulates the dynamics of multi-instrument science platforms such as those of the Earth Observation System (EOS) while maintaining strong ties to astrophysics missions such as the Optical Interferometer. Uplink/downlink services and a reprogrammable computer provide flexibility for long-term investigations by members of the CSI community (NASA, DoD, academia, and industry). CSI-Star fills the gap between short-term experiments, which have been conducted primarily on the Shuttle, and future science missions which require the technology. The on-orbit maturity of CSI technology must be established to obtain acceptance by project managers and to promote injection of the technology into future science missions.

Results of research on development of an intellectual information system of bankruptcy risk assessment of the enterprise

NASA Astrophysics Data System (ADS)

Telipenko, E.; Chernysheva, T.; Zakharova, A.; Dumchev, A.

2015-10-01

The article represents research results about the knowledge base development for the intellectual information system for the bankruptcy risk assessment of the enterprise. It is described the process analysis of the knowledge base development; the main process stages, some problems and their solutions are given. The article introduces the connectionist model for the bankruptcy risk assessment based on the analysis of industrial enterprise financial accounting. The basis for this connectionist model is a three-layer perceptron with the back propagation of error algorithm. The knowledge base for the intellectual information system consists of processed information and the processing operation method represented as the connectionist model. The article represents the structure of the intellectual information system, the knowledge base, and the information processing algorithm for neural network training. The paper shows mean values of 10 indexes for industrial enterprises; with the help of them it is possible to carry out a financial analysis of industrial enterprises and identify correctly the current situation for well-timed managerial decisions. Results are given about neural network testing on the data of both bankrupt and financially strong enterprises, which were not included into training and test sets.

Social protection and people with disabilities in Brazil.

PubMed

Costa, Nilson do Rosário; Marcelino, Miguel Abud; Duarte, Cristina Maria Rabelais; Uhr, Deborah

2016-10-01

The article analyzes the social protection policy for people with disabilities in Brazil. It describes the patterns of demand and eligibility for Continued Benefit of Social Assistance (Benefício de Prestação Continuada - BPC) in the 1996-2014 period. The article argues that BPC is a direct result of the social pact achieved by the Brazilian Federal Constitution of 1988. BPC is a social assistance benefit consisting in an unconditional and monthly transference of the equivalent of a minimum wage, to poor people with deficiency and elders with more than 65 years. Disabled person eligibility depends on means-test, and social and medical evaluation by public bureaucracy. The research strategy was based on time series, and cross-sectional data collection and analysis. Dummy qualitative variables were also used to describe the pattern of demand and eligibility. The article demonstrates that BPC has provided income to disabled and elder people. However, systematic barriers were identified to disabled people's access to BPC. The work suggests that the pattern of refusal could be associated to a means testing application by street-level-bureaucracy. In this sense, the work draws attention to the necessary revision of street-level-bureaucracy tools and procedures to increase BPC positive discrimination.

Are there any differences between different testing sites? A cross-sectional study of a Norwegian low-threshold HIV testing service for men who have sex with men.

PubMed

Moseng, Bera Ulstein; Bjørnshagen, Vegar

2017-10-06

To describe a Norwegian low-threshold HIV testing service targeting men who have sex with men (MSM). After the HIV testing consultation, all users of the HIV testing service were invited to answer the study questionnaire. The study setting included the sites where testing was performed, that is, the testing service's office in Oslo, cruising areas, bars/clubs and in hotels in other Norwegian cities. MSM users of the testing service. Data were collected on demographics, HIV testing and sexual behaviour as well as the participant's motivations for choosing to take an HIV test at this low-threshold HIV testing service. The data are stratified by testing site. 1577 HIV testing consultations were performed, the study sample consisted of 732 MSM users. 11 tested positive for HIV. 21.7% had a non-western background, 27.1% reported having a non-gay sexual orientation. 21.9% had 10 or more male sexual partners during the last year, 27.9% reported also having had a female sexual partner. 56.4% reported having practised unprotected anal intercourse during the last 6 months. 20.1% had never tested for HIV before. Most of these user characteristics varied by testing sites. The Norwegian low-threshold testing service recruits target groups that are otherwise hard to reach with HIV testing. This may indicate that the testing service contributes to increase HIV testing rates among MSM in Norway. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Use of the cytosensor microphysiometer to predict results of a 21-day cumulative irritation patch test in humans.

PubMed

Landin, Wendell E; Mun, Greg C; Nims, Raymond W; Harbell, John W

2007-09-01

The cytosensor microphysiometer (mu phi) was investigated as a rapid, relatively inexpensive test to predict performance of skin cleansing wipes on the human 21-day cumulative irritation patch test (21CIPT). It indirectly measures metabolic rate changes in L929 cells as a function of test article dose, by measuring the acidification rate in a low-buffer medium. The dose producing a 50% reduction in metabolic rate (MRD50), relative to the baseline rate, is used as a measure of toxicity. The acute toxicity of the mu phi assay can be compared to the chronic toxicity of the 21CIPT, which is based largely on the exposure of test agents to the epidermal cells, resulting in damage and penetration of the stratum corneum leading to cell toxicity. Two series of surfactant-based cleansing wipe products were tested via the mu phi assay and 21CIPT. The first series, consisting of 20 products, was used to determine a prediction model. The second series of 38 products consisted of routine product development formulas or marketed products. Comparing the results from both tests, samples with an MRD50 greater than 50 mg/ml provided a 21CIPT score consistent with a product that performs satisfactorily in the market. When the MRD50 was greater than 78 mg/ml, the 21CIPT score was usually zero. The mu phi may be more sensitive than the 21CIPT for ranking minimally irritating materials. The mu phi assay is useful as a screen for predicting the performance of a wet wipes formula on the 21CIPT, and concurrently reduces the use of animals for safety testing in a product development program for cleansing wipes.

Engaging a middle school teacher and students in formal-informal science education: Contexts of science standards-based curriculum and an urban science center

NASA Astrophysics Data System (ADS)

Grace, Shamarion Gladys

This is a three-article five chapter doctoral dissertation. The overall purpose of this three-pronged study is to engage a middle school science teacher and students in formal-informal science education within the context of a science standards-based curriculum and Urban Science Center. The goals of the study were: (1) to characterize the conversations of formal and informal science educators as they attempted to implement a standards-based curriculum augmented with science center exhibits; (2) to study the classroom discourse between the teacher and students that foster the development of common knowledge in science and student understanding of the concept of energy before observing science center exhibits on energy; (3) to investigate whether or not a standards-driven, project-based Investigating and Questioning our World through Science and Technology (IQWST) curriculum unit on forms and transformation of energy augmented with science center exhibits had a significant effect on urban African-American seventh grade students' achievement and learning. Overall, the study consisted of a mixed-method approach. Article one consists of a case study featuring semi-structured interviews and field notes. Article two consists of documenting and interpreting teacher-students' classroom discourse. Article three consists of qualitative methods (classroom discussion, focus group interviews, student video creation) and quantitative methods (multiple choice and open-ended questions). Oral discourses in all three studies were audio-recorded and transcribed verbatim. In article one, the community of educators' conversations were critically analyzed to discern the challenges educators encountered when they attempted to connect school curriculum to energy exhibits at the Urban Science Center. The five challenges that characterize the emergence of a third space were as follows: (a) science terminology for lesson focus, (b) "dumb-down" of science exhibits, (c) exploration distracts lesson structure, (d) meaning of model/modeling, and (e) Which comes first?--science content learning or science exhibit exploration. These challenges were considered and discussed as opportunities for personal growth. The third space allowed for participant reflection and transformation in formal-informal collaboration and communication. In article two, teacher-students' classroom discourse transcripts corresponding to the workbook lessons from the IQWST Physics Unit were analyzed. Four instructional events were selected for discourse analysis: focusing on the inquiry process; understanding about kinetic energy; formulating scientific explanations; and translating energy transformation. The discourse-excerpts representing the aforementioned instructional events revealed four teacher behaviors: teacher-posed questions, teacher-explanations, teacher responses, and teacher reference to past learning. Of these teacher behaviors, teacher-posed questions dominated and these consist of fill-in-the-blank, affirmation, second-order, descriptive, and explanatory. Article three represented the results of the IQWST Unit Achievement Test (IUAT) and students' understanding of the concepts of energy and energy transformation. The IUAT indicated that students (N=37) in the experimental group taught with the science center exhibits augmented IQWST curriculum unit achieved scores (p<0.001) about the same as students in the control group (N=31) taught only with the IQWST curriculum unit. However, the experimental (Deltapost-pre = 4.78) and control (Deltapost-pre = 4.04) groups revealed significant gains (p<0.001) from pre-test scores to post-test scores. These findings confirm that underserved urban students' learning can be enhanced with an augmented standards-based curriculum unit. The students also can realize significant achievement gains when professionally developed and administration supported teachers use standards-driven science curriculum whether or not augmented with science exhibits. The three qualitative analyses of data in article three indicated that students had reasonable understandings of the forms and transformation of energy. They were also able to explain the working of science exhibits using their understandings of the energy concepts developed in class. The first study (article 1) implies that a third space allows for participant reflection and transformation in formal-informal collaboration and communication. The second study (article 1) implies the following: (a) the teacher's struggle with dialogic discourse, a communicative approach that fosters common knowledge through a social process; and (b) the need for professional development that fosters dialogic discourse. The third study (article three) implies an integrated curriculum with both formal and informal components can be successfully enacted to achieve content mastery when teachers are given professional development on how to develop students' knowledge using science exhibits, time to develop concepts with students using exhibits, and support from administration to modify the time required to cover certain topics in the curriculum with more time spent on those topics such as energy that require creative teaching methods to assist students' science learning. Overall, the study implies that the science center exhibits can provide a context to observe whether students are able to translate classroom constructed knowledge at the intersection of formal-informal instruction.

Protecting raw data and psychological tests from wrongful disclosure: a primer on the law and other persuasive strategies.

PubMed

Kaufmann, Paul M

2009-09-01

Psychologists must advocate for more stringent legal protection of psychological test materials because using standardized tests is the most distinguishing and exclusive feature of psychological evaluation practice. With the rapid growth in forensic consulting, unrestrained discovery of raw data and psychological test materials during litigation erodes the reliability and validity of the test procedures. Dissemination of test materials reduces the interpretive value of the tests and promotes cheating, turning our best methods into junk science in the courtroom. This article proposes to reform the law and to revise the professional ethics of psychologists consistent with the strong public policy of test security as described by the U.S. Supreme Court in Detroit Edison v. NLRB (1979). Currently, federal courts and about 20 states protect psychological tests as a unique methodology, with some states enacting a psychologist nondisclosure privilege/duty to safeguard test materials from wrongful disclosure. The record management practices of psychologists vary considerably and are vulnerable to legal attack unless psychologists are aware of legal arguments to protect test materials from wrongful release. Although this article does not offer legal advice, it describes the most common records management problem confronting neuropsychologists and some practical solutions to the raw data problem. Best practice for protecting psychological tests requires the psychologist to understand the law and to assert the psychologist nondisclosure privilege. Other strategies are presented and evaluated. Organized psychology and the legal community should advocate for a uniform rule to protect the objectivity, fairness, and integrity psychological methods in litigation.

A “Cookbook” Cost Analysis Procedure for Medical Information Systems*

PubMed Central

Torrance, Janice L.; Torrance, George W.; Covvey, H. Dominic

1983-01-01

A costing procedure for medical information systems is described. The procedure incorporates state-of-the-art costing methods in an easy to follow “cookbook” format. Application of the procedure consists of filling out a series of Mac-Tor EZ-Cost forms. The procedure and forms have been field tested by application to a cardiovascular database system. This article describes the major features of the costing procedure. The forms and other details are available upon request.

Composite Material from By-products and Its Properties

NASA Astrophysics Data System (ADS)

Šeps, K.; Broukalová, I.; Vodička, J.

2017-09-01

The paper shows an example of utilization of specific textile admixture - fluffs of torn textiles from waste cars in production of composite with aggregate consisting entirely of unsorted recycled concrete. The admixture in the mixture of recycled concrete and cement binder fills the pores and voids in composite. The elaborated composite has working title STEREDconcrete. In the article, basic mechanical-physical properties of the composite are presented also the fire resistance of STEREDconcrete, which was determined in tests.

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 397

NASA Technical Reports Server (NTRS)

1999-01-01

This report lists reports, articles and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

The role of dispositional factors in moderating message framing effects.

PubMed

Covey, Judith

2014-01-01

Health messages can be framed in terms of the benefits of adopting a recommendation (gain frame) or the costs of not adopting a recommendation (loss frame). In recent years, research has demonstrated that the relative persuasiveness of gain and loss frames can depend on a variety of dispositional factors. This article synthesizes this growing literature to develop our understanding of the moderators of framing. A systematic review of published literature on gain and loss framing was conducted. Articles were retrieved that tested the interaction between framing and moderators representing individual differences in how people are predisposed to think, feel, and behave. The significance and direction of framing main effects and interactions were noted and effect size data extracted where available. Forty-seven reports published between January 1990 and January 2012 were retrieved that reported on 50 unique experiments testing 23 different moderators. Significant interactions with typically small to medium simple main effect sizes were found in 37 of the 50 studies. Consistent interactions were found for factors such as ambivalence, approach-avoidance motivation, regulatory focus, need for cognition, and self-efficacy beliefs. Less consistent effects were found for perceived riskiness of activity, issue involvement, and perceived susceptibility/severity. The relative effectiveness of gain- or loss-framed messages can depend on the disposition of the message recipient. Tailoring the frame to the individual therefore has the potential to maximize message persuasiveness. 2014 APA, all rights reserved

A velocity command stepper motor for CSI application

NASA Technical Reports Server (NTRS)

Sulla, Jeffrey L.; Juang, Jer-Nan; Horta, Lucas G.

1991-01-01

The application of linear force actuators for vibration suppression of flexible structures has received much attention in recent years. A linear force actuator consists of a movable mass that is restrained such that its motion is linear. By application of a force to the mass, an equal and opposite reaction force can be applied to a structure. The use of an industrial linear stepper motor as a reaction mass actuator is described. With the linear stepper motor mounted on a simple test beam and the NASA Mini-Mast, output feedback of acceleration or displacement are used to augment the structural damping of the test articles. Significant increases in damping were obtained for both the test beam and the Mini-Mast.

Critical joints in large composite primary aircraft structures. Volume 2: Technology demonstration test report

NASA Technical Reports Server (NTRS)

Bunin, Bruce L.

1985-01-01

A program was conducted to develop the technology for critical structural joints in composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. The results of four large composite multirow bolted joint tests are presented. The tests were conducted to demonstrate the technology for critical joints in highly loaded composite structure and to verify the analytical methods that were developed throughout the program. The test consisted of a wing skin-stringer transition specimen representing a stringer runout and skin splice on the wing lower surface at the side of the fuselage attachment. All tests were static tension tests. The composite material was Toray T-300 fiber with Ciba-Geigy 914 resin in 10 mil tape form. The splice members were metallic, using combinations of aluminum and titanium. Discussions are given of the test article, instrumentation, test setup, test procedures, and test results for each of the four specimens. Some of the analytical predictions are also included.

[Forced spirometry procedure].

PubMed

Cortés Aguilera, Antonio Javier

2008-11-01

Forced spirometry consists in a complementary test which is carried out in a health office in a workplace in order to determine the lung capacity of workers exposed to determined professional risks or those susceptible to determined working conditions which could lead to the development of respiratory problems. This test has been developed based on health vigilance laws under Article 22 of the Law for Prevention of Risks in the Workplace and requires that the technician, a nurse in a workplace, who performs it have some knowledge and skills regarding its use, following the norms for forced spirometry set by the Spanish Association for Pneumatology and Thoracic Surgery (SEPAR).

Manager personality, manager service quality orientation, and service climate: test of a model.

PubMed

Salvaggio, Amy Nicole; Schneider, Benjamin; Nishii, Lisa H; Mayer, David M; Ramesh, Anuradha; Lyon, Julie S

2007-11-01

This article conceptually and empirically explores the relationships among manager personality, manager service quality orientation, and climate for customer service. Data were collected from 1,486 employees and 145 managers in grocery store departments (N = 145) to test the authors' theoretical model. Largely consistent with hypotheses, results revealed that core self-evaluations were positively related to managers' service quality orientation, even after dimensions of the Big Five model of personality were controlled, and that service quality orientation fully mediated the relationship between personality and global service climate. Implications for personality and organizational climate research are discussed. (c) 2007 APA

Nondestructive Evaluation Methods for the Ares I Common Bulkhead

NASA Technical Reports Server (NTRS)

Walker, James

2010-01-01

A large scale bonding demonstration test article was fabricated to prove out manufacturing techniques for the current design of the NASA Ares I Upper Stage common bulkhead. The common bulkhead serves as the single interface between the liquid hydrogen and liquid oxygen portions of the Upper Stage propellant tank. The bulkhead consists of spin-formed aluminum domes friction stir welded to Y-rings and bonded to a perforated phenolic honeycomb core. Nondestructive evaluation methods are being developed for assessing core integrity and the core-to-dome bond line of the common bulkhead. Detection of manufacturing defects such as delaminations between the core and face sheets as well as service life defects such as crushed or sheared core resulting from impact loading are all of interest. The focus of this work will be on the application of thermographic, shearographic, and phased array ultrasonic methods to the bonding demonstration article as well as various smaller test panels featuring design specific defect types and geometric features.

Introduction to statistical modelling 2: categorical variables and interactions in linear regression.

PubMed

Lunt, Mark

2015-07-01

In the first article in this series we explored the use of linear regression to predict an outcome variable from a number of predictive factors. It assumed that the predictive factors were measured on an interval scale. However, this article shows how categorical variables can also be included in a linear regression model, enabling predictions to be made separately for different groups and allowing for testing the hypothesis that the outcome differs between groups. The use of interaction terms to measure whether the effect of a particular predictor variable differs between groups is also explained. An alternative approach to testing the difference between groups of the effect of a given predictor, which consists of measuring the effect in each group separately and seeing whether the statistical significance differs between the groups, is shown to be misleading. © The Author 2013. Published by Oxford University Press on behalf of the British Society for Rheumatology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Performance of laminar-flow leading-edge test articles in cloud encounters

NASA Technical Reports Server (NTRS)

Davis, Richard E.; Maddalon, Dal V.; Wagner, Richard D.

1987-01-01

An extensive data bank of concurrent measurements of laminar flow (LF), particle concentration, and aircraft charging state was gathered for the first time. From this data bank, 13 flights in the simulated airline service (SAS) portion were analyzed to date. A total of 6.86 hours of data at one-second resolution were analyzed. An extensive statistical analysis, for both leading-edge test articles, shows that there is a significant effect of cloud and haze particles on the extent of laminar flow obtained. Approximately 93 percent of data points simulating LFC flight were obtained in clear air conditions; approximately 7 percent were obtained in cloud and haze. These percentages are consistent with earlier USAF and NASA estimates and results. The Hall laminar flow loss criteria was verified qualitatively. Larger particles and higher particle concentrations have a more marked effect on LF than do small particles. A particle spectrometer of a charging patch are both acceptable as diagnostic indicators of the presence of particles detrimental to laminar flow.

Consensus for genes to be included on cancer panel tests offered by UK genetics services: guidelines of the UK Cancer Genetics Group.

PubMed

Taylor, Amy; Brady, Angela F; Frayling, Ian M; Hanson, Helen; Tischkowitz, Marc; Turnbull, Clare; Side, Lucy

2018-04-16

Genetic testing for hereditary cancer predisposition has evolved rapidly in recent years with the discovery of new genes, but there is much debate over the clinical utility of testing genes for which there are currently limited data regarding the degree of associated cancer risk. To address the discrepancies that have arisen in the provision of these tests across the UK, the UK Cancer Genetics Group facilitated a 1-day workshop with representation from the majority of National Health Service (NHS) clinical genetics services. Using a preworkshop survey followed by focused discussion of genes without prior majority agreement for inclusion, we achieved consensus for panels of cancer genes with sufficient evidence for clinical utility, to be adopted by all NHS genetics services. To support consistency in the delivery of these tests and advice given to families across the country, we also developed management proposals for individuals who are found to have pathogenic mutations in these genes. However, we fully acknowledge that the decision regarding what test is most appropriate for an individual family rests with the clinician, and will depend on factors including specific phenotypic features and the family structure. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Development and Validation of an Instrument to Assess the Impact of Cyberbullying: The Cybervictimization Emotional Impact Scale.

PubMed

Elipe, Paz; Mora-Merchán, Joaquín A; Nacimiento, Lydia

2017-08-01

Cyberbullying is a phenomenon with important adverse consequences on victims. The emotional impact of this phenomenon has been well established. However, there is to date no instrument with good psychometric properties tested to assess such impact. The objective of this study was developing and testing the psychometric properties of an instrument to assess the emotional impact of cyberbullying: the "Cybervictimization Emotional Impact Scale, CVEIS." The sample included 1,016 Compulsory Secondary Education students (52.9 percent female) aged between 12 and 18 (M = 13.86, DT = 1.33) from three schools in southern Spain. The study used Confirmatory Factor Analyses to test the structure of the questionnaire and robustness of the scale. Internal consistency was also tested. The results supported the suitability of a three-factor model: active, depressed, and annoyed. This model showed an optimal adjustment, which was better than its competing models. It also demonstrated strong invariance among cybervictims and non-cybervictims and also among gender. The internal consistency of each factor, and the total scale, was also appropriate. The article concludes by discussing research and practical implications of the scale.

ALLOY COATINGS AND METHOD OF APPLYING

DOEpatents

Eubank, L.D.; Boller, E.R.

1958-08-26

A method for providing uranium articles with a pro tective coating by a single dip coating process is presented. The uranium article is dipped into a molten zinc bath containing a small percentage of aluminum. The resultant product is a uranium article covered with a thin undercoat consisting of a uranium-aluminum alloy with a small amount of zinc, and an outer layer consisting of zinc and aluminum. The article may be used as is, or aluminum sheathing may then be bonded to the aluminum zinc outer layer.

Consistent simulation of droplet evaporation based on the phase-field multiphase lattice Boltzmann method

NASA Astrophysics Data System (ADS)

Safari, Hesameddin; Rahimian, Mohammad Hassan; Krafczyk, Manfred

2014-09-01

In the present article, we extend and generalize our previous article [H. Safari, M. H. Rahimian, and M. Krafczyk, Phys. Rev. E 88, 013304 (2013), 10.1103/PhysRevE.88.013304] to include the gradient of the vapor concentration at the liquid-vapor interface as the driving force for vaporization allowing the evaporation from the phase interface to work for arbitrary temperatures. The lattice Boltzmann phase-field multiphase modeling approach with a suitable source term, accounting for the effect of the phase change on the velocity field, is used to solve the two-phase flow field. The modified convective Cahn-Hilliard equation is employed to reconstruct the dynamics of the interface topology. The coupling between the vapor concentration and temperature field at the interface is modeled by the well-known Clausius-Clapeyron correlation. Numerous validation tests including one-dimensional and two-dimensional cases are carried out to demonstrate the consistency of the presented model. Results show that the model is able to predict the flow features around and inside an evaporating droplet quantitatively in quiescent as well as convective environments.

Consistent simulation of droplet evaporation based on the phase-field multiphase lattice Boltzmann method.

PubMed

Safari, Hesameddin; Rahimian, Mohammad Hassan; Krafczyk, Manfred

2014-09-01

In the present article, we extend and generalize our previous article [H. Safari, M. H. Rahimian, and M. Krafczyk, Phys. Rev. E 88, 013304 (2013)] to include the gradient of the vapor concentration at the liquid-vapor interface as the driving force for vaporization allowing the evaporation from the phase interface to work for arbitrary temperatures. The lattice Boltzmann phase-field multiphase modeling approach with a suitable source term, accounting for the effect of the phase change on the velocity field, is used to solve the two-phase flow field. The modified convective Cahn-Hilliard equation is employed to reconstruct the dynamics of the interface topology. The coupling between the vapor concentration and temperature field at the interface is modeled by the well-known Clausius-Clapeyron correlation. Numerous validation tests including one-dimensional and two-dimensional cases are carried out to demonstrate the consistency of the presented model. Results show that the model is able to predict the flow features around and inside an evaporating droplet quantitatively in quiescent as well as convective environments.

Stability and maturity of biowaste composts derived by small municipalities: Correlation among physical, chemical and biological indices.

PubMed

Oviedo-Ocaña, E R; Torres-Lozada, P; Marmolejo-Rebellon, L F; Hoyos, L V; Gonzales, S; Barrena, R; Komilis, D; Sanchez, A

2015-10-01

Stability and maturity are important criteria to guarantee the quality of a compost that is applied to agriculture or used as amendment in degraded soils. Although different techniques exist to evaluate stability and maturity, the application of laboratory tests in municipalities in developing countries can be limited due to cost and application complexities. In the composting facilities of such places, some classical low cost on-site tests to monitor the composting process are usually implemented; however, such tests do not necessarily clearly identify conditions of stability and maturity. In this article, we have applied and compared results of stability and maturity tests that can be easily employed on site (i.e. temperature, pH, moisture, electrical conductivity [EC], odor and color), and of tests that require more complex laboratory techniques (volatile solids, C/N ratio, self-heating, respirometric index, germination index [GI]). The evaluation of the above was performed in the field scale using 2 piles of biowaste applied compost. The monitoring period was from day 70 to day 190 of the process. Results showed that the low-cost tests traditionally employed to monitor the composting process on-site, such as temperature, color and moisture, do not provide consistent determinations with the more complex laboratory tests used to assess stability (e.g. respiration index, self-heating, volatile solids). In the case of maturity tests (GI, pH, EC), both the on-site tests (pH, EC) and the laboratory test (GI) provided consistent results. Although, stability was indicated for most of the samples, the maturity tests indicated that products were consistently immature. Thus, a stable product is not necessarily mature. Conclusively, the decision on the quality of the compost in the installations located in developing countries requires the simultaneous use of a combination of tests that are performed both in the laboratory and on-site. Copyright © 2015 Elsevier Ltd. All rights reserved.

Defining the next generation journal: The NLM-Elsevier interactive publications experiment.

PubMed

Siegel, Elliot R; Lindberg, Donald A B; Campbell, Glen P; Harless, William G; Goodwin, C Rory

2010-01-01

A unique collaborative project to identify interactive enhancements to conventional-print journal articles, and to evaluate their contribution to readers' learning and satisfaction. It was hypothesized that (a) the enhanced article would yield more knowledge acquisition than the original article; (b) the interactivity aspects of the enhanced article would measurably contribute to the acquisition of knowledge; and (c) the enhancements to the original article would increase reader acceptance. Fifteen SNMA medical students, assumed to have a greater generational familiarity and comfort level with interactive electronic media, reviewed 12 articles published in three Elsevier clinical and basic science journals. They used the Student National Medical Association's asynchronous online discussion forum over a four month period to suggest desired enhancements to improve learning. "Prognostic Factors in Stage T1 Bladder Cancer", published in the journal Urology was selected by the investigators as presenting the best opportunity to incorporate many of the students' suggested interactive and presentational enhancements in the limited timeframe available prior to the established test date. Educational, statistical, and medical consultants assisted in designing a test protocol in which 51 second to fourth year medical students were randomly assigned to experimental and control conditions, and were administered either the original or enhanced interactive version of the article on individual computer workstations. Test subjects consisted of 23 participants in the control group (8 males, 15 females) and 28 participants in the experimental group (9 males, 19 females). All subjects completed pre- and post-test instruments which measured their knowledge gain on 30 true-false and multiple-choice questions, along with 7 Likert-type questions measuring acceptance of the articles' format. Time to completion was recorded with the experimental group taking 22 min on average compared to 18 min for the controls; pre- and post-test times were 6 and 7 min, respectively. Statistical comparisons were based on change scores using either the Student t-test or the Two Way Analysis of Variance or Covariance. Significance was set at α = 0.05 or better. on the dependent measure of knowledge acquisition showed no difference overall on the 30 questions, but learning gain was statistically significant for the subset of 10 questions that measured gain on content that was accessible by the user-invoked interactive features of the enhanced article. Further analyses revealed significant interactions by student year and gender. Second year students (11 in the control group, 8 in the experimental group) were the best performers in terms of knowledge acquisition from both articles. The female medical students received a larger learning gain from journal enhancements and interactivity components than their male counterparts. Acceptance overall was greater for the experimental group who rated the experience more favorably than the controls. Failure to consider human factors such as gender and learning style may obscure underlying differences and their impact on the interactive aspects of scientific publications. Preliminary findings suggest the need for further study to include a heavier focus on interactivity apart from presentational enhancements; a more rigorous treatment of time as a specific variable; and an expanded experimental design that evaluates acquisition, understanding, integration and acceptance as dependent measures.

Fundus findings in a series of patients with extrapulmonary tuberculosis in Thailand.

PubMed

Jirawison, Choeng; Liu, Yingna; Surasit, Karjbundid; Maningding, Ernest; Kamphaengkham, Siripim; Ausayakhun, Somsanguan; Heiden, David; Margolis, Todd P; Gonzales, John A; Acharya, Nisha R; Keenan, Jeremy David

2017-06-01

The aim of this study was to determine the frequency of fundus abnormalities among patients who are undergoing or have recently completed treatment for extrapulmonary tuberculosis (eTB). This is a prospective cross-sectional study conducted in a TB clinic of a tertiary hospital in northern Thailand. All patients who had eTB between January 2014 and August 2015 were invited by telephone to return to the clinic for fundus photography. Three uveitis specialists reviewed all photographs to identify posterior segment lesions that were consistent with ocular TB. A total of 265 patients were diagnosed with eTB during the specified period, of which 118 (44.5%) were reached by telephone and 60 (50.8%) participated in the study. A total of 7 eyes from six patients (10.0% of participants, 95% CI 2.2% to 17.8%) had lesions consistent with ocular TB. The group with possible ocular TB lesions was on average 16.8 years older than those without ocular lesions (p=0.01), but the two groups were otherwise not significantly different. Ocular lesions consistent with TB were not rare in a group of patients who were undergoing or had recently completed treatment for eTB. Fundus examination may provide diagnostic information that could influence a clinician's beliefs when diagnosing eTB. Given the low costs and immediate results of eye examination, this diagnostic test should be considered in patients suspected for eTB, especially when other tests are negative. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Trends in Child Maltreatment Literature.

ERIC Educational Resources Information Center

Behl, Leah E.; Conyngham, Heather A.; May, Patricia F.

2003-01-01

Child maltreatment articles (n=2090) published from 1977-1998 were reviewed. Across the period studied, quantitative articles and articles on child sexual abuse increased and theoretical articles and articles on physical abuse decreased. Articles examining child neglect or emotional abuse remained consistently low. Participant recruitment from…

Consistency and accuracy of indexing systematic review articles and meta-analyses in medline.

PubMed

Wilczynski, Nancy L; Haynes, R Brian

2009-09-01

Systematic review articles support the advance of science and translation of research evidence into healthcare practice. Inaccurate retrieval from medline could limit access to reviews. To determine the quality of indexing systematic reviews and meta-analyses in medline. The Clinical Hedges Database, containing the results of a hand search of 161 journals, was used to test medline indexing terms for their ability to retrieve systematic reviews that met predefined methodologic criteria (labelled as 'pass' review articles) and reviews that reported a meta-analysis. The Clinical Hedges Database contained 49 028 articles; 753 were 'pass' review articles (552 with a meta-analysis). In total 758 review articles (independent of whether they passed) reported a meta-analysis. The search strategy that retrieved the highest number of 'pass' systematic reviews achieved a sensitivity of 97.1%. The publication type 'meta analysis' had a false positive rate of 5.6% (95% CI 3.9 to 7.6), and false negative rate of 0.31% (95% CI 0.26 to 0.36) for retrieving systematic reviews that reported a meta-analysis. Inaccuracies in indexing systematic reviews and meta-analyses in medline can be partly overcome by a 5-term search strategy. Introducing a publication type for systematic reviews of the literature could improve retrieval performance.

Structural Testing of a 6m Hypersonic Inflatable Aerodynamic Decelerator System

NASA Technical Reports Server (NTRS)

Swanson, G. T.; Kazemba, C. D.; Johnson, R. K.; Hughes, S. J.; Calomino, A. M.

2015-01-01

NASA is developing low ballistic coefficient technologies to support the Nations long-term goal of landing humans on Mars. Current entry, decent, and landing technologies are not practical for this class of payloads due to geometric constraints dictated by current and future launch vehicle fairing limitations. Hypersonic Inflatable Aerodynamic Decelerators (HIADs) are being developed to circumvent this limitation and are now considered a leading technology to enable landing of heavy payloads on Mars. At the beginning of 2014, a 6m diameter HIAD inflatable structure with an integrated flexible thermal protection system (TPS) was subjected to a static load test series to verify its structural performance under flight-relevant loads. The inflatable structure was constructed into a 60 degree sphere-cone configuration using nine inflatable torus segments composed of fiber-reinforced thin films. The inflatable tori were joined together using adhesives and high-strength textile woven structural straps. These straps help distribute the load throughout the inflatable structure. The 6m flexible TPS was constructed using multiple layers of high performance materials that are designed to protect the inflatable structure from heat loads that would be seen in flight during atmospheric entry. A custom test fixture was constructed to perform the static load test series. The fixture consisted of a round structural tub with enough height and width to allow for displacement of the HIAD test article as loads were applied. The bottom of the tub rim had an airtight seal with the floor. The rigid centerbody of the HIAD was mounted to a pedestal in the center of the structural tub. Using an impermeable membrane draped over the HIAD test article, an airtight seal was created with the top rim of the static load tub. This seal allowed partial vacuum to be pulled beneath the HIAD resulting in a uniform static pressure load applied to the outer surface. Using this technique, the test article was subjected to loads of up to 50,000lbs. During the test series an extensive amount of instrumentation was used to provide a rich data set, including deflected shape, structural strap loads, torus cord loads, inflation pressures, and applied static load. In this paper the 2014 6m HIAD static load test series will be discussed in detail, including the design of the 6m HIAD test article, the test setup, and test execution. Analysis results will be described supporting the conclusions that were drawn from the test series..

The N-CODES project moves to user testing.

PubMed

Chin, Elizabeth F; Sosa, Mary-Elizabeth; O'Neill, Eileen S

2006-01-01

For a technology to be implemented successfully, it must be thoroughly tested by the stakeholders who will use it in practice. This article reports on the user testing of the Nurse Computer Decision Support working prototype. Ten acute care nurses with varying levels of education and experience participated in the testing. The study's protocol consisted of a series of tasks requiring the participants to use the system while solving patient problems. Both quantitative and qualitative data on usability, ease of navigation, and nurse satisfaction were collected. The nurses ranked usability and ease of navigation highly. Nurses were excited about the system's clinical potential and felt that it would be useful to all practitioners regardless of experience. Testing the system in an actual clinical setting is the next step, but it is clear that the system has extraordinary potential to improve clinical decision making and patient outcomes.

Neutral buoyancy test evaluation of hardware and extravehicular activity procedures for on-orbit assembly of a 14 meter precision reflector

NASA Technical Reports Server (NTRS)

Heard, Walter L., Jr.; Lake, Mark S.

1993-01-01

A procedure that enables astronauts in extravehicular activity (EVA) to perform efficient on-orbit assembly of large paraboloidal precision reflectors is presented. The procedure and associated hardware are verified in simulated Og (neutral buoyancy) assembly tests of a 14 m diameter precision reflector mockup. The test article represents a precision reflector having a reflective surface which is segmented into 37 individual panels. The panels are supported on a doubly curved tetrahedral truss consisting of 315 struts. The entire truss and seven reflector panels were assembled in three hours and seven minutes by two pressure-suited test subjects. The average time to attach a panel was two minutes and three seconds. These efficient assembly times were achieved because all hardware and assembly procedures were designed to be compatible with EVA assembly capabilities.

Physical examination tests for screening and diagnosis of cervicogenic headache: A systematic review.

PubMed

Rubio-Ochoa, J; Benítez-Martínez, J; Lluch, E; Santacruz-Zaragozá, S; Gómez-Contreras, P; Cook, C E

2016-02-01

It has been suggested that differential diagnosis of headaches should consist of a robust subjective examination and a detailed physical examination of the cervical spine. Cervicogenic headache (CGH) is a form of headache that involves referred pain from the neck. To our knowledge, no studies have summarized the reliability and diagnostic accuracy of physical examination tests for CGH. The aim of this study was to summarize the reliability and diagnostic accuracy of physical examination tests used to diagnose CGH. A systematic review following PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines was performed in four electronic databases (MEDLINE, Web of Science, Embase and Scopus). Full text reports concerning physical tests for the diagnosis of CGH which reported the clinometric properties for assessment of CGH, were included and screened for methodological quality. Quality Appraisal for Reliability Studies (QAREL) and Quality Assessment of Studies of Diagnostic Accuracy (QUADAS-2) scores were completed to assess article quality. Eight articles were retrieved for quality assessment and data extraction. Studies investigating diagnostic reliability of physical examination tests for CGH scored poorer on methodological quality (higher risk of bias) than those of diagnostic accuracy. There is sufficient evidence showing high levels of reliability and diagnostic accuracy of the selected physical examination tests for the diagnosis of CGH. The cervical flexion-rotation test (CFRT) exhibited both the highest reliability and the strongest diagnostic accuracy for the diagnosis of CGH. Copyright © 2015 Elsevier Ltd. All rights reserved.

A review of principles in design and usability testing of tactile technology for individuals with visual impairments.

PubMed

Horton, Emily L; Renganathan, Ramkesh; Toth, Bryan N; Cohen, Alexa J; Bajcsy, Andrea V; Bateman, Amelia; Jennings, Mathew C; Khattar, Anish; Kuo, Ryan S; Lee, Felix A; Lim, Meilin K; Migasiuk, Laura W; Zhang, Amy; Zhao, Oliver K; Oliveira, Marcio A

2017-01-01

To lay the groundwork for devising, improving, and implementing new technologies to meet the needs of individuals with visual impairments, a systematic literature review was conducted to: a) describe hardware platforms used in assistive devices, b) identify their various applications, and c) summarize practices in user testing conducted with these devices. A search in relevant EBSCO databases for articles published between 1980 and 2014 with terminology related to visual impairment, technology, and tactile sensory adaptation yielded 62 articles that met the inclusion criteria for final review. It was found that while earlier hardware development focused on pin matrices, the emphasis then shifted toward force feedback haptics and accessible touch screens. The inclusion of interactive and multimodal features has become increasingly prevalent. The quantity and consistency of research on navigation, education, and computer accessibility suggest that these are pertinent areas of need for the visually impaired community. Methodologies for usability testing ranged from case studies to larger cross-sectional studies. Many studies used blindfolded sighted users to draw conclusions about design principles and usability. Altogether, the findings presented in this review provide insight on effective design strategies and user testing methodologies for future research on assistive technology for individuals with visual impairments.

Comparing Strategies for Health Information Dissemination: Messengers That Can Help or Hinder.

PubMed

Fishman, Jessica; Greenberg, Patricia; Bagga, Margy Barbieri; Casarett, David; Propert, Kathleen

2018-05-01

To test the effects of different messengers on the dissemination of health information. An experimental study exposed participants to 12 news articles pertaining to 1 of 3 health topics framed from the perspective of 4 generic messengers: religious figures, doctors, celebrity patients, or ordinary patients. Participants select as many of the 12 articles as desired. A cancer clinic within a large, urban hospital serving a sociodemographically diverse patient population. Eighty-nine patients with a history of cancer. The primary outcome was the frequency with which each news story was selected. Summary statistics and a general estimating equation model. For each health topic, news articles using celebrity messengers were the least likely to be selected; almost half of the participants (36 [41.4%] of 87) rejected all such articles. Articles linked to religious figures were equally unpopular ( P = .59). Articles that used doctors or ordinary patients as the messenger were very likely to be selected: Nearly all women (84 [96.6%] of 87) selected at least one of these. Furthermore, the odds of choosing articles linked to celebrities or religious leaders were statistically significantly lower than the odds of choosing those linked to ordinary patients or doctors ( P < .01). Commonly used generic messengers had large effects on the dissemination of information. Health materials linked to celebrities or religious figures were consistently less likely to be selected than those linked to ordinary patients, or doctors.

Pressurization System Modeling for a Generic Bimese Two- Stage-to-Orbit Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Mazurkivich, Pete; Chandler, Frank; Nguyen, Han

2005-01-01

A pressurization system model was developed for a generic bimese Two-Stage-to-orbit Reusable Launch Vehicle using a cross-feed system and operating with densified propellants. The model was based on the pressurization system model for a crossfeed subscale water test article and was validated with test data obtained from the test article. The model consists of the liquid oxygen and liquid hydrogen pressurization models, each made up of two submodels, Booster and Orbiter tank pressurization models. The tanks are controlled within a 0.2-psi band and pressurized on the ground with ambient helium and autogenously in flight with gaseous oxygen and gaseous hydrogen. A 15-psi pressure difference is maintained between the Booster and Orbiter tanks to ensure crossfeed check valve closure before Booster separation. The analysis uses an ascent trajectory generated for a generic bimese vehicle and a tank configuration based on the Space Shuttle External Tank. It determines the flow rates required to pressurize the tanks on the ground and in flight, and demonstrates the model's capability to analyze the pressurization system performance of a full-scale bimese vehicle with densified propellants.

Day-to-day consistency of lower extremity kinematics during stair ambulation in 24-45 years old athletes.

PubMed

Husa-Russell, Johanna; Ukelo, Thomas; List, Renate; Lorenzetti, Silvio; Wolf, Peter

2011-04-01

Before making interpretations on the effects of interventions or on the features of pathological gait patterns during stair ambulation, the day-to-day consistency of the investigated variables must be established. In this article, the day-to-day consistency was determined for kinematic variables during barefoot stair ambulation. Ten healthy athletes performed two gait analysis sessions, at least one week apart, utilizing a marker set of 47 skin markers, and a functional joint center/axes determination. Being found on limits of agreement and mean differences between the repeated stair ambulation sessions, totally 43 ranges of motions were examined at the hip, knee, ankle, and midfoot joints. The day-to-day consistency was generally in the magnitude of three degrees, irrespective of test condition, investigated joint, or regarded cardinal body plane. The reported values of the day-to-day consistency provide guidelines to distinguish between pathological and healthy gait patterns, and thresholds to determine minimal effects of interventions during stair ambulation. Copyright © 2011 Elsevier B.V. All rights reserved.

[Interval cancers and episode sensitivity in population-based screening programmes for colorectal cancer: a systematic review].

PubMed

Domènech, Xènia; Garcia, Montse; Benito, Llúcia; Binefa, Gemma; Vidal, Carmen; Milà, Núria; Moreno, Víctor

2015-01-01

To describe interval cancers (IC) and the sensitivity of colorectal cancer (CRC) screening programmes. A systematic review of the literature was conducted through a MEDLINE (PubMed) search. The search strategy combined the terms 'interval cancer', 'false negative', 'mass screening', 'screening' 'early detection of cancer', 'colorectal cancer' and 'bowel cancer'. Inclusion criteria consisted of population-based screening programmes, original articles written in English or Spanish and publication dates between 1999/01/01 and 2015/02/28. A narrative synthesis of the included articles was performed detailing the characteristics of the screening programmes, the IC rate, and the information sources used in each study. Thirteen articles were included. The episode sensitivity of CRC screening programmes ranged from 42.2% to 65.3% in programmes using the guaiac test and between 59.1% and 87.0% with the immunochemical test. We found a higher proportion of women who were diagnosed with IC and these lesions were mainly located in the proximal colon. There is wide variability in the IC rate in CRC programmes. To ensure comparability between programmes, there is a need for consensus on the working definition of IC and the methods used for their identification and quantification. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

Detecting fatigue thresholds from electromyographic signals: A systematic review on approaches and methodologies.

PubMed

Ertl, Peter; Kruse, Annika; Tilp, Markus

2016-10-01

The aim of the current paper was to systematically review the relevant existing electromyographic threshold concepts within the literature. The electronic databases MEDLINE and SCOPUS were screened for papers published between January 1980 and April 2015 including the keywords: neuromuscular fatigue threshold, anaerobic threshold, electromyographic threshold, muscular fatigue, aerobic-anaerobictransition, ventilatory threshold, exercise testing, and cycle-ergometer. 32 articles were assessed with regard to their electromyographic methodologies, description of results, statistical analysis and test protocols. Only one article was of very good quality. 21 were of good quality and two articles were of very low quality. The review process revealed that: (i) there is consistent evidence of one or two non-linear increases of EMG that might reflect the additional recruitment of motor units (MU) or different fiber types during fatiguing cycle ergometer exercise, (ii) most studies reported no statistically significant difference between electromyographic and metabolic thresholds, (iii) one minute protocols with increments between 10 and 25W appear most appropriate to detect muscular threshold, (iv) threshold detection from the vastus medialis, vastus lateralis, and rectus femoris is recommended, and (v) there is a great variety in study protocols, measurement techniques, and data processing. Therefore, we recommend further research and standardization in the detection of EMGTs. Copyright © 2016 Elsevier Ltd. All rights reserved.

A fast method for finding bound systems in numerical simulations: Results from the formation of asteroid binaries

NASA Astrophysics Data System (ADS)

Leinhardt, Zoë M.; Richardson, Derek C.

2005-08-01

We present a new code ( companion) that identifies bound systems of particles in O(NlogN) time. Simple binaries consisting of pairs of mutually bound particles and complex hierarchies consisting of collections of mutually bound particles are identifiable with this code. In comparison, brute force binary search methods scale as O(N) while full hierarchy searches can be as expensive as O(N), making analysis highly inefficient for multiple data sets with N≳10. A simple test case is provided to illustrate the method. Timing tests demonstrating O(NlogN) scaling with the new code on real data are presented. We apply our method to data from asteroid satellite simulations [Durda et al., 2004. Icarus 167, 382-396; Erratum: Icarus 170, 242; reprinted article: Icarus 170, 243-257] and note interesting multi-particle configurations. The code is available at http://www.astro.umd.edu/zoe/companion/ and is distributed under the terms and conditions of the GNU Public License.

The Unbearable Lightness of Health Science Reporting: A Week Examining Italian Print Media

PubMed Central

Filice, Angelina; Russi, Gianpaolo; Belletti, Eleonora

2010-01-01

Background Although being an important source of science news information to the public, print news media have often been criticized in their credibility. Health-related content of press media articles has been examined by many studies underlining that information about benefits, risks and costs are often incomplete or inadequate and financial conflicts of interest are rarely reported. However, these studies have focused their analysis on very selected science articles. The present research aimed at adopting a wider explorative approach, by analysing all types of health science information appearing on the Italian national press in one-week period. Moreover, we attempted to score the balance of the articles. Methodology/Principal Findings We collected 146 health science communication articles defined as articles aiming at improving the reader's knowledge on health from a scientific perspective. Articles were evaluated by 3 independent physicians with respect to different divulgation parameters: benefits, costs, risks, sources of information, disclosure of financial conflicts of interest and balance. Balance was evaluated with regard to exaggerated or non correct claims. The selected articles appeared on 41 Italian national daily newspapers and 41 weekly magazines, representing 89% of national circulation copies: 97 articles (66%) covered common medical treatments or basic scientific research and 49 (34%) were about new medical treatments, procedures, tests or products. We found that only 6/49 (12%) articles on new treatments, procedures, tests or products mentioned costs or risks to patients. Moreover, benefits were always maximized and in 16/49 cases (33%) they were presented in relative rather than absolute terms. The majority of stories (133/146, 91%) did not report any financial conflict of interest. Among these, 15 were shown to underreport them (15/146, 9.5%), as we demonstrated that conflicts of interest did actually exist. Unbalanced articles were 27/146 (18%). Specifically, the probability of unbalanced reporting was significantly increased in stories about a new treatment, procedure, test or product (22/49, 45%), compared to stories covering common treatments or basic scientific research (5/97, 5%) (risk ratio, 8.72). Conclusions/Significance Consistent with prior research on health science communication in other countries, we report undisclosed costs and risks, emphasized benefits, unrevealed financial conflicts of interest and exaggerated claims in Italian print media. In addition, we show that the risk for a story about a new medical approach to be unbalanced is almost 9 times higher with respect to stories about any other kind of health science-related topics. These findings raise again the fundamental issue whether popular media is detrimental rather than useful to public health. PMID:20352089

The unbearable lightness of health science reporting: a week examining Italian print media.

PubMed

Iaboli, Luca; Caselli, Luana; Filice, Angelina; Russi, Gianpaolo; Belletti, Eleonora

2010-03-24

Although being an important source of science news information to the public, print news media have often been criticized in their credibility. Health-related content of press media articles has been examined by many studies underlining that information about benefits, risks and costs are often incomplete or inadequate and financial conflicts of interest are rarely reported. However, these studies have focused their analysis on very selected science articles. The present research aimed at adopting a wider explorative approach, by analysing all types of health science information appearing on the Italian national press in one-week period. Moreover, we attempted to score the balance of the articles. We collected 146 health science communication articles defined as articles aiming at improving the reader's knowledge on health from a scientific perspective. Articles were evaluated by 3 independent physicians with respect to different divulgation parameters: benefits, costs, risks, sources of information, disclosure of financial conflicts of interest and balance. Balance was evaluated with regard to exaggerated or non correct claims. The selected articles appeared on 41 Italian national daily newspapers and 41 weekly magazines, representing 89% of national circulation copies: 97 articles (66%) covered common medical treatments or basic scientific research and 49 (34%) were about new medical treatments, procedures, tests or products. We found that only 6/49 (12%) articles on new treatments, procedures, tests or products mentioned costs or risks to patients. Moreover, benefits were always maximized and in 16/49 cases (33%) they were presented in relative rather than absolute terms. The majority of stories (133/146, 91%) did not report any financial conflict of interest. Among these, 15 were shown to underreport them (15/146, 9.5%), as we demonstrated that conflicts of interest did actually exist. Unbalanced articles were 27/146 (18%). Specifically, the probability of unbalanced reporting was significantly increased in stories about a new treatment, procedure, test or product (22/49, 45%), compared to stories covering common treatments or basic scientific research (5/97, 5%) (risk ratio, 8.72). Consistent with prior research on health science communication in other countries, we report undisclosed costs and risks, emphasized benefits, unrevealed financial conflicts of interest and exaggerated claims in Italian print media. In addition, we show that the risk for a story about a new medical approach to be unbalanced is almost 9 times higher with respect to stories about any other kind of health science-related topics. These findings raise again the fundamental issue whether popular media is detrimental rather than useful to public health.

21 CFR 58.107 - Test and control article handling.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

21 CFR 58.107 - Test and control article handling.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

21 CFR 58.107 - Test and control article handling.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

21 CFR 58.107 - Test and control article handling.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Test and control article handling. 58.107 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.107 Test and control article handling. Procedures shall be established for a system for the handling of the test and...

Discussion of the dizziness handicap inventory.

PubMed

Mutlu, Basak; Serbetcioglu, Bulent

2013-01-01

A review of the Dizziness Handicap Inventory (DHI). NUMBER OF STUDIES: Seventy-four studies. Articles published between January 1990 and May 2012 were identified by searches in PubMed electronic database. Of the 227 articles meeting the inclusion criteria 74 were reviewed. These articles are discussed under nine topics; Reliability, validity and internal consistency of the original version of DHI, relationship between vestibular/balance tests and DHI, association between DHI and the other scales related to balance impairments, exploratory factor analysis of the DHI, screening version of DHI, translations of DHI into other languages, the role of DHI to assess the success of the treatment of balance disorder, DHI results in various vestibular disorders, general characteristics of DHI in patients with balance impairment. Self reported measures represent unique pieces of the information important for the management of dizzy patients. DHI is the most widely used self reported measurement of patients with dizziness. It has been translated into fourteen languages, so it is widely accepted.

Creating Mechanisms for Meaningful Collaboration Between Members of Urban Communities and University-Based HIV Prevention Researchers.

PubMed

McKay, Mary M; Hibbert, Richard; Lawrence, Rita; Miranda, Ana; Paikoff, Roberta; Bell, Carl C; Madison-Boyd, Sybil; Baptiste, Donna; Coleman, Doris; Pinto, Rogério M; Bannon, William M

2007-01-01

This article provides a description of a Community/University Collaborative Board, a formalized partnership between representatives from an inner-city community and university-based researchers. This Collaborative Board oversees a number of research projects focused on designing, delivering and testing family-based HIV prevention and mental health focused programs to elementary and junior high school age youth and their families. The Collaborative Board consists of urban parents, school staff members, representatives from community-based agencies and university-based researchers. One research project, the CHAMP (Collaborative HIV prevention and Adolescent Mental health Project) Family Program Study, an urban, family-based HIV prevention project will be used to illustrate how the Collaborative Board oversees a community-based research study. The process of establishing a Collaborative Board, recruiting members and developing subcommittees is described within this article. Examples of specific issues addressed by the Collaborative Board within its subcommittees, Implementation, Finance, Welcome, Research, Grant writing, Curriculum, and Leadership, are detailed in this article along with lessons learned.

Implementation of K-Means Clustering Method for Electronic Learning Model

NASA Astrophysics Data System (ADS)

Latipa Sari, Herlina; Suranti Mrs., Dewi; Natalia Zulita, Leni

2017-12-01

Teaching and Learning process at SMK Negeri 2 Bengkulu Tengah has applied e-learning system for teachers and students. The e-learning was based on the classification of normative, productive, and adaptive subjects. SMK Negeri 2 Bengkulu Tengah consisted of 394 students and 60 teachers with 16 subjects. The record of e-learning database was used in this research to observe students’ activity pattern in attending class. K-Means algorithm in this research was used to classify students’ learning activities using e-learning, so that it was obtained cluster of students’ activity and improvement of student’s ability. Implementation of K-Means Clustering method for electronic learning model at SMK Negeri 2 Bengkulu Tengah was conducted by observing 10 students’ activities, namely participation of students in the classroom, submit assignment, view assignment, add discussion, view discussion, add comment, download course materials, view article, view test, and submit test. In the e-learning model, the testing was conducted toward 10 students that yielded 2 clusters of membership data (C1 and C2). Cluster 1: with membership percentage of 70% and it consisted of 6 members, namely 1112438 Anggi Julian, 1112439 Anis Maulita, 1112441 Ardi Febriansyah, 1112452 Berlian Sinurat, 1112460 Dewi Anugrah Anwar and 1112467 Eka Tri Oktavia Sari. Cluster 2:with membership percentage of 30% and it consisted of 4 members, namely 1112463 Dosita Afriyani, 1112471 Erda Novita, 1112474 Eskardi and 1112477 Fachrur Rozi.

Consistency of financial interest disclosures in the biomedical literature: the case of coronary stents.

PubMed

Weinfurt, Kevin P; Seils, Damon M; Tzeng, Janice P; Lin, Li; Schulman, Kevin A; Califf, Robert M

2008-05-07

Disclosure of authors' financial interests has been proposed as a strategy for protecting the integrity of the biomedical literature. We examined whether authors' financial interests were disclosed consistently in articles on coronary stents published in 2006. We searched PubMed for English-language articles published in 2006 that provided evidence or guidance regarding the use of coronary artery stents. We recorded article characteristics, including information about authors' financial disclosures. The main outcome measures were the prevalence, nature, and consistency of financial disclosures. There were 746 articles, 2985 authors, and 135 journals in the database. Eighty-three percent of the articles did not contain disclosure statements for any author (including declarations of no interests). Only 6% of authors had an article with a disclosure statement. In comparisons between articles by the same author, the types of disagreement were as follows: no disclosure statements vs declarations of no interests (64%); specific disclosures vs no disclosure statements (34%); and specific disclosures vs declarations of no interests (2%). Among the 75 authors who disclosed at least 1 relationship with an organization, there were 2 cases (3%) in which the organization was disclosed in every article the author wrote. In the rare instances when financial interests were disclosed, they were not disclosed consistently, suggesting that there are problems with transparency in an area of the literature that has important implications for patient care. Our findings suggest that the inconsistencies we observed are due to both the policies of journals and the behavior of some authors.

Consistency of Financial Interest Disclosures in the Biomedical Literature: The Case of Coronary Stents

PubMed Central

Weinfurt, Kevin P.; Seils, Damon M.; Tzeng, Janice P.; Lin, Li; Schulman, Kevin A.; Califf, Robert M.

2008-01-01

Background Disclosure of authors' financial interests has been proposed as a strategy for protecting the integrity of the biomedical literature. We examined whether authors' financial interests were disclosed consistently in articles on coronary stents published in 2006. Methodology/Principal Findings We searched PubMed for English-language articles published in 2006 that provided evidence or guidance regarding the use of coronary artery stents. We recorded article characteristics, including information about authors' financial disclosures. The main outcome measures were the prevalence, nature, and consistency of financial disclosures. There were 746 articles, 2985 authors, and 135 journals in the database. Eighty-three percent of the articles did not contain disclosure statements for any author (including declarations of no interests). Only 6% of authors had an article with a disclosure statement. In comparisons between articles by the same author, the types of disagreement were as follows: no disclosure statements vs declarations of no interests (64%); specific disclosures vs no disclosure statements (34%); and specific disclosures vs declarations of no interests (2%). Among the 75 authors who disclosed at least 1 relationship with an organization, there were 2 cases (3%) in which the organization was disclosed in every article the author wrote. Conclusions/Significance In the rare instances when financial interests were disclosed, they were not disclosed consistently, suggesting that there are problems with transparency in an area of the literature that has important implications for patient care. Our findings suggest that the inconsistencies we observed are due to both the policies of journals and the behavior of some authors. PMID:18461146

Space Launch System, Core Stage, Structural Test Design and Implementation

NASA Technical Reports Server (NTRS)

Shaughnessy, Ray

2017-01-01

As part of the National Aeronautics and Space Administration's (NASA) Space Launch System (SLS) Program, engineers at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama are working to design, develop and implement the SLS Core Stage structural testing. The SLS will have the capability to return humans to the Moon and beyond and its first launch is scheduled for December of 2017. The SLS Core Stage consist of five major elements; Forward Skirt, Liquid Oxygen (LOX) tank, Intertank (IT), Liquid Hydrogen (LH2) tank and the Engine Section (ES). Structural Test Articles (STA) for each of these elements are being designed and produced by Boeing at Michoud Assembly Facility located in New Orleans, La. The structural test for the Core Stage STAs (LH2, LOX, IT and ES) are to be conducted by the MSFC Test Laboratory. Additionally, the MSFC Test Laboratory manages the Structural Test Equipment (STE) design and development to support the STAs. It was decided early (April 2012) in the project life that the LH2 and LOX tank STAs would require new test stands and the Engine Section and Intertank would be tested in existing facilities. This decision impacted schedules immediately because the new facilities would require Construction of Facilities (C of F) funds that require congressional approval and long lead times. The Engine Section and Intertank structural test are to be conducted in existing facilities which will limit lead times required to support the first launch of SLS. With a SLS launch date of December, 2017 Boeing had a need date for testing to be complete by September of 2017 to support flight certification requirements. The test facilities were required to be ready by October of 2016 to support test article delivery. The race was on to get the stands ready before Test Article delivery and meet the test complete date of September 2017. This paper documents the past and current design and development phases and the supporting processes, tools, and methodology for supporting the SLS Core Stage STA test stands and related STE. The paper will address key requirements, system development activities and project challenges. Additionally, the interrelationships as well as interdependencies within the SLS project will be discussed.

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

21 CFR 58.105 - Test and control article characterization.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Test and control article characterization. 58.105... GENERAL GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.105 Test and control article characterization. (a) The identity, strength, purity, and composition or other...

Open Architecture Data System for NASA Langley Combined Loads Test System

NASA Technical Reports Server (NTRS)

Lightfoot, Michael C.; Ambur, Damodar R.

1998-01-01

The Combined Loads Test System (COLTS) is a new structures test complex that is being developed at NASA Langley Research Center (LaRC) to test large curved panels and cylindrical shell structures. These structural components are representative of aircraft fuselage sections of subsonic and supersonic transport aircraft and cryogenic tank structures of reusable launch vehicles. Test structures are subjected to combined loading conditions that simulate realistic flight load conditions. The facility consists of two pressure-box test machines and one combined loads test machine. Each test machine possesses a unique set of requirements or research data acquisition and real-time data display. Given the complex nature of the mechanical and thermal loads to be applied to the various research test articles, each data system has been designed with connectivity attributes that support both data acquisition and data management functions. This paper addresses the research driven data acquisition requirements for each test machine and demonstrates how an open architecture data system design not only meets those needs but provides robust data sharing between data systems including the various control systems which apply spectra of mechanical and thermal loading profiles.

An Extension of the Chi-Square Procedure for Non-NORMAL Statistics, with Application to Solar Neutrino Data

NASA Astrophysics Data System (ADS)

Sturrock, P. A.

2008-01-01

Using the chi-square statistic, one may conveniently test whether a series of measurements of a variable are consistent with a constant value. However, that test is predicated on the assumption that the appropriate probability distribution function (pdf) is normal in form. This requirement is usually not satisfied by experimental measurements of the solar neutrino flux. This article presents an extension of the chi-square procedure that is valid for any form of the pdf. This procedure is applied to the GALLEX-GNO dataset, and it is shown that the results are in good agreement with the results of Monte Carlo simulations. Whereas application of the standard chi-square test to symmetrized data yields evidence significant at the 1% level for variability of the solar neutrino flux, application of the extended chi-square test to the unsymmetrized data yields only weak evidence (significant at the 4% level) of variability.

Aerospike Engine Post-Test Diagnostic System Delivered to Rocketdyne

NASA Technical Reports Server (NTRS)

Meyer, Claudia M.

2000-01-01

The NASA Glenn Research Center at Lewis Field, in cooperation with Rocketdyne, has designed, developed, and implemented an automated Post-Test Diagnostic System (PTDS) for the X-33 linear aerospike engine. The PTDS was developed to reduce analysis time and to increase the accuracy and repeatability of rocket engine ground test fire and flight data analysis. This diagnostic system provides a fast, consistent, first-pass data analysis, thereby aiding engineers who are responsible for detecting and diagnosing engine anomalies from sensor data. It uses analytical methods modeled after the analysis strategies used by engineers. Glenn delivered the first version of PTDS in September of 1998 to support testing of the engine s power pack assembly. The system was used to analyze all 17 power pack tests and assisted Rocketdyne engineers in troubleshooting both data acquisition and test article anomalies. The engine version of PTDS, which was delivered in June of 1999, will support all single-engine, dual-engine, and flight firings of the aerospike engine.

Diagnostic accuracy of tablet-based software for the detection of concussion.

PubMed

Yang, Suosuo; Flores, Benjamin; Magal, Rotem; Harris, Kyrsti; Gross, Jonathan; Ewbank, Amy; Davenport, Sasha; Ormachea, Pablo; Nasser, Waleed; Le, Weidong; Peacock, W Frank; Katz, Yael; Eagleman, David M

2017-01-01

Despite the high prevalence of traumatic brain injuries (TBI), there are few rapid and straightforward tests to improve its assessment. To this end, we developed a tablet-based software battery ("BrainCheck") for concussion detection that is well suited to sports, emergency department, and clinical settings. This article is a study of the diagnostic accuracy of BrainCheck. We administered BrainCheck to 30 TBI patients and 30 pain-matched controls at a hospital Emergency Department (ED), and 538 healthy individuals at 10 control test sites. We compared the results of the tablet-based assessment against physician diagnoses derived from brain scans, clinical examination, and the SCAT3 test, a traditional measure of TBI. We found consistent distributions of normative data and high test-retest reliability. Based on these assessments, we defined a composite score that distinguishes TBI from non-TBI individuals with high sensitivity (83%) and specificity (87%). We conclude that our testing application provides a rapid, portable testing method for TBI.

Herth hope index: psychometric testing of the Chinese version.

PubMed

Chan, Keung Sum; Li, Ho Cheung William; Chan, Sally Wai-Chi; Lopez, Violeta

2012-09-01

This article is a report on psychometric testing of the Chinese version of the herth hope index. The availability of a valid and reliable instrument that accurately measures the level of hope in patients with heart failure is crucial before any hope-enhancing interventions can be appropriately planned and evaluated. There is no such instrument for Chinese people. A test-retest, within-subjects design was used. A purposive sample of 120 Hong Kong Chinese patients with heart failure between the ages of 60 and 80 years admitted to two medical wards was recruited during an 8-month period in 2009. Participants were asked to respond to the Chinese version of the herth hope index, Hamilton depression rating scale and Rosenberg's self-esteem scale. The internal consistency, content validity and construct validity and test-retest reliability of the Chinese version of the herth hope index were assessed. The newly translated scale demonstrated adequate internal consistency, good content validity and appropriate convergent and discriminant validity. Confirmatory factor analysis added further evidence of the construct validity of the scale. Results suggest that the newly translated scale can be used as a self-report assessment tool in assessing the level of hope in Hong Kong Chinese patients with heart failure. © 2011 Blackwell Publishing Ltd.

Microbicide safety/efficacy studies in animals: macaques and small animal models.

PubMed

Veazey, Ronald S

2008-09-01

A number of microbicide candidates have failed to prevent HIV transmission in human clinical trials, and there is uncertainty as to how many additional trials can be supported by the field. Regardless, there are far too many microbicide candidates in development, and a logical and consistent method for screening and selecting candidates for human clinical trials is desperately needed. The unique host and cell specificity of HIV, however, provides challenges for microbicide safety and efficacy screening, that can only be addressed by rigorous testing in relevant laboratory animal models. A number of laboratory animal model systems ranging from rodents to nonhuman primates, and single versus multiple dose challenges have recently been developed to test microbicide candidates. These models have shed light on both the safety and efficacy of candidate microbicides as well as the early mechanisms involved in transmission. This article summarizes the major advantages and disadvantages of the relevant animal models for microbicide safety and efficacy testing. Currently, nonhuman primates are the only relevant and effective laboratory model for screening microbicide candidates. Given the consistent failures of prior strategies, it is now clear that rigorous safety and efficacy testing in nonhuman primates should be a prerequisite for advancing additional microbicide candidates to human clinical trials.

Microbicide Safety/Efficacy studies in animals -macaques and small animal models

PubMed Central

Veazey, Ronald S.

2009-01-01

Purpose of review A number of microbicide candidates have failed to prevent HIV transmission in human clinical trials, and there is uncertainty as to how many additional trials can be supported by the field. Regardless, there are far too many microbicide candidates in development, and a logical and consistent method for screening and selecting candidates for human clinical trials is desperately needed. However, the unique host and cell specificity of HIV provides challenges for microbicide safety and efficacy screening, that can only be addressed by rigorous testing in relevant laboratory animal models. Recent findings A number of laboratory animal model systems ranging from rodents to nonhuman primates, and single versus multiple dose challenges have recently been developed to test microbicide candidates. These models have shed light on both the safety and efficacy of candidate microbicides as well as the early mechanisms involved in transmission. This article summarizes the major advantages and disadvantages of the relevant animal models for microbicide safety and efficacy testing. Summary Currently, nonhuman primates are the only relevant and effective laboratory model for screening microbicide candidates. Given the consistent failures of prior strategies, it is now clear that rigorous safety and efficacy testing in nonhuman primates should be a pre-requisite for advancing additional microbicide candidates to human clinical trials. PMID:19373023

Performance of search strategies to retrieve systematic reviews of diagnostic test accuracy from the Cochrane Library.

PubMed

Huang, Yuansheng; Yang, Zhirong; Wang, Jing; Zhuo, Lin; Li, Zhixia; Zhan, Siyan

2016-05-06

To compare the performance of search strategies to retrieve systematic reviews of diagnostic test accuracy from The Cochrane Library. Databases of CDSR and DARE in the Cochrane Library were searched for systematic reviews of diagnostic test accuracy published between 2008 and 2012 through nine search strategies. Each strategy consists of one group or combination of groups of searching filters about diagnostic test accuracy. Four groups of diagnostic filters were used. The Strategy combing all the filters was used as the reference to determine the sensitivity, precision, and the sensitivity x precision product for another eight Strategies. The reference Strategy retrieved 8029 records, of which 832 were eligible. The strategy only composed of MeSH terms about "accuracy measures" achieved the highest values in both precision (69.71%) and product (52.45%) with a moderate sensitivity (75.24%). The combination of MeSH terms and free text words about "accuracy measures" contributed little to increasing the sensitivity. Strategies composed of filters about "diagnosis" had similar sensitivity but lower precision and product to those composed of filters about "accuracy measures". MeSH term "exp'diagnosis' " achieved the lowest precision (9.78%) and product (7.91%), while its hyponym retrieved only half the number of records at the expense of missing 53 target articles. The precision was negatively correlated with sensitivities among the nine strategies. Compared to the filters about "diagnosis", the filters about "accuracy measures" achieved similar sensitivities but higher precision. When combining both terms, sensitivity of the strategy was enhanced obviously. The combination of MeSH terms and free text words about the same concept seemed to be meaningless for enhancing sensitivity. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Development of a researcher codebook for use in evaluating social networking site profiles.

PubMed

Moreno, Megan A; Egan, Katie G; Brockman, Libby

2011-07-01

Social networking sites (SNSs) are immensely popular and allow for the display of personal information, including references to health behaviors. Evaluating displayed content on an SNS for research purposes requires a systematic approach and a precise data collection instrument. The purpose of this article is to describe one approach to the development of a research codebook so that others may develop and test their own codebooks for use in SNS research. Our SNS research codebook began on the basis of health behavior theory and clinical criteria. Key elements in the codebook developmental process included an iterative team approach and an emphasis on confidentiality. Codebook successes include consistently high inter-rater reliability. Challenges include time investment in coder training and SNS server changes. We hope that this article will provide detailed information about one systematic approach to codebook development so that other researchers may use this structure to develop and test their own codebooks for use in SNS research. Copyright © 2011 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Breast Cyst Aspiration

MedlinePlus

... TestingRead Article >>Plasma Viral Load TestingInsulin TherapyRead Article >>Insulin Therapy Visit our interactive symptom checker Visit our interactive symptom checker Get Started Related ArticlesPlasma Viral Load TestingRead ... TherapyRead Article >>Drugs, Procedures & DevicesInsulin TherapyThe goal of ...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

21 CFR 58.113 - Mixtures of articles with carriers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Mixtures of articles with carriers. 58.113 Section... GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES Test and Control Articles § 58.113 Mixtures of articles with carriers. (a) For each test or control article that is mixed with a carrier, tests...

Utilization survey of prototype structural test article

NASA Technical Reports Server (NTRS)

Baber, S.; Mcdaniel, H. M.; Berry, M. J.

1974-01-01

A survey was conducted of six aerospace companies and two NASA agencies to determine how prototype structural test articles are used in flight operations. The prototype structures are airframes and similar devices which are used for testing and generally are not flown. The survey indicated the following: (1) prototype test articles are not being discarded after development testing is complete, but are used for other purposes, (2) only two cases of prototypes being refurbished and flown were identified, (3) protective devices and inspection techniques are available to prevent or minimize test article damage, (4) substitute programs from design verification are availabel in lieu of using prototype structural articles, and (5) there is a trend away from dedicated test articles. Four options based on these study results were identified to reduce test and hardware costs without compromising reliability of the flight program.

Tests of the MICE Electron Muon Ranger frontend electronics with a small scale prototype

NASA Astrophysics Data System (ADS)

Bolognini, D.; Bene, P.; Blondel, A.; Cadoux, F.; Debieux, S.; Giannini, G.; Graulich, J. S.; Lietti, D.; Masciocchi, F.; Prest, M.; Rothenfusser, K.; Vallazza, E.; Wisting, H.

2011-08-01

The MICE experiment is being commissioned at RAL to demonstrate the feasibility of the muon ionization cooling technique for future applications such as the Neutrino Factory and the Muon Collider. The cooling will be evaluated by measuring the emittance before and after the cooling channel with two 4 T spectrometers; to distinguish muons from the background, a multi-detector particle identification system is foreseen: three Time of Flight stations, two Cherenkov counters and a calorimetric system consisting of a pre-shower layer and a fully active scintillator detector (EMR) are used to discriminate muons from pions and electrons. EMR consists of 48 planes of triangular scintillating bars coupled to WLS fibers readout by single PMTs on one side and MAPMTs on the other; each plane sensible area is 1 m 2. This article deals with a small scale prototype of the EMR detector which has been used to test the MAPMT frontend electronics based on the MAROC ASIC; the tests with cosmic rays using both an analog mode and a digital readout mode are presented. A very preliminary study on the cross talk problem is also shown.

Automatic Bayes Factors for Testing Equality- and Inequality-Constrained Hypotheses on Variances.

PubMed

Böing-Messing, Florian; Mulder, Joris

2018-05-03

In comparing characteristics of independent populations, researchers frequently expect a certain structure of the population variances. These expectations can be formulated as hypotheses with equality and/or inequality constraints on the variances. In this article, we consider the Bayes factor for testing such (in)equality-constrained hypotheses on variances. Application of Bayes factors requires specification of a prior under every hypothesis to be tested. However, specifying subjective priors for variances based on prior information is a difficult task. We therefore consider so-called automatic or default Bayes factors. These methods avoid the need for the user to specify priors by using information from the sample data. We present three automatic Bayes factors for testing variances. The first is a Bayes factor with equal priors on all variances, where the priors are specified automatically using a small share of the information in the sample data. The second is the fractional Bayes factor, where a fraction of the likelihood is used for automatic prior specification. The third is an adjustment of the fractional Bayes factor such that the parsimony of inequality-constrained hypotheses is properly taken into account. The Bayes factors are evaluated by investigating different properties such as information consistency and large sample consistency. Based on this evaluation, it is concluded that the adjusted fractional Bayes factor is generally recommendable for testing equality- and inequality-constrained hypotheses on variances.

Critical Thinking Theory to Practice: Using the Expert's Thought Process as Guide for Learning and Assessment.

PubMed

Marshall, Teresa A; Marchini, Leonardo; Cowen, Howard; Hartshorn, Jennifer E; Holloway, Julie A; Straub-Morarend, Cheryl L; Gratton, David; Solow, Catherine M; Colangelo, Nicholas; Johnsen, David C

2017-08-01

Critical thinking skills are essential for the successful dentist, yet few explicit skillsets in critical thinking have been developed and published in peer-reviewed literature. The aims of this article are to 1) offer an assessable critical thinking teaching model with the expert's thought process as the outcome, learning guide, and assessment instrument and 2) offer three critical thinking skillsets following this model: for geriatric risk assessment, technology decision making, and situation analysis/reflections. For the objective component, the student demonstrates delivery of each step in the thought process. For the subjective component, the student is judged to have grasped the principles as applied to the patient or case. This article describes the framework and the results of pilot tests in which students in one year at this school used the model in the three areas, earning scores of 90% or above on the assessments. The model was thus judged to be successful for students to demonstrate critical thinking skillsets in the course settings. Students consistently delivered each step of the thought process and were nearly as consistent in grasping the principles behind each step. As more critical thinking skillsets are implemented, a reinforcing network develops.

Abatement of waste gases and water during the processes of semiconductor fabrication.

PubMed

Wen, Rui-mei; Liang, Jun-wu

2002-10-01

The purpose of this article is to examine the methods and equipment for abating waste gases and water produced during the manufacture of semiconductor materials and devices. Three separating methods and equipment are used to control three different groups of electronic wastes. The first group includes arsine and phosphine emitted during the processes of semiconductor materials manufacture. The abatement procedure for this group of pollutants consists of adding iodates, cupric and manganese salts to a multiple shower tower (MST) structure. The second group includes pollutants containing arsenic, phosphorus, HF, HCl, NO2, and SO3 emitted during the manufacture of semiconductor materials and devices. The abatement procedure involves mixing oxidants and bases in an oval column with a separator in the middle. The third group consists of the ions of As, P and heavy metals contained in the waste water. The abatement procedure includes adding CaCO3 and ferric salts in a flocculation-sedimentation compact device equipment. Test results showed that all waste gases and water after the abatement procedures presented in this article passed the discharge standards set by the State Environmental Protection Administration of China.

Joint and Soft Tissue Injections

MedlinePlus

... TestingRead Article >>Plasma Viral Load TestingInsulin TherapyRead Article >>Insulin Therapy Visit our interactive symptom checker Visit our interactive symptom checker Get Started Related ArticlesPlasma Viral Load TestingRead ... TherapyRead Article >>Drugs, Procedures & DevicesInsulin TherapyThe goal of ...

Phonotactic constraints: Implications for models of oral reading in Russian.

PubMed

Ulicheva, Anastasia; Coltheart, Max; Saunders, Steven; Perry, Conrad

2016-04-01

The present article investigates how phonotactic rules constrain oral reading in the Russian language. The pronunciation of letters in Russian is regular and consistent, but it is subject to substantial phonotactic influence: the position of a phoneme and its phonological context within a word can alter its pronunciation. In Part 1 of the article, we analyze the orthography-to-phonology and phonology-to-phonology (i.e., phonotactic) relationships in Russian monosyllabic words. In Part 2 of the article, we report empirical data from an oral word reading task that show an effect of phonotactic dependencies on skilled reading in Russian: humans are slower when reading words where letter-phoneme correspondences are highly constrained by phonotactic rules compared with those where there are few or no such constraints present. A further question of interest in this article is how computational models of oral reading deal with the phonotactics of the Russian language. To answer this question, in Part 3, we report simulations from the Russian dual-route cascaded model (DRC) and the Russian connectionist dual-process model (CDP++) and assess the performance of the 2 models by testing them against human data. (c) 2016 APA, all rights reserved).

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 1 2012-04-01 2012-04-01 false Facilities for handling test and control articles... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there shall be separate areas for: (1) Receipt and storage of the test and control articles. (2) Mixing of the...

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false Facilities for handling test and control articles... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there shall be separate areas for: (1) Receipt and storage of the test and control articles. (2) Mixing of the...

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 1 2013-04-01 2013-04-01 false Facilities for handling test and control articles... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there shall be separate areas for: (1) Receipt and storage of the test and control articles. (2) Mixing of the...

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 1 2014-04-01 2014-04-01 false Facilities for handling test and control articles... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there shall be separate areas for: (1) Receipt and storage of the test and control articles. (2) Mixing of the...

Characteristics of Laser Beam and Friction Stir Welded AISI 409M Ferritic Stainless Steel Joints

NASA Astrophysics Data System (ADS)

Lakshminarayanan, A. K.; Balasubramanian, V.

2012-04-01

This article presents the comparative evaluation of microstructural features and mechanical properties of friction stir welded (solid-state) and laser beam welded (high energy density fusion welding) AISI 409M grade ferritic stainless steel joints. Optical microscopy, microhardness testing, transverse tensile, and impact tests were performed. The coarse ferrite grains in the base material were changed to fine grains consisting duplex structure of ferrite and martensite due to the rapid cooling rate and high strain induced by severe plastic deformation caused by frictional stirring. On the other hand, columnar dendritic grain structure was observed in fusion zone of laser beam welded joints. Tensile testing indicates overmatching of the weld metal relative to the base metal irrespective of the welding processes used. The LBW joint exhibited superior impact toughness compared to the FSW joint.

Reliability, Dimensionality, and Internal Consistency as Defined by Cronbach: Distinct Albeit Related Concepts

ERIC Educational Resources Information Center

Davenport, Ernest C.; Davison, Mark L.; Liou, Pey-Yan; Love, Quintin U.

2015-01-01

This article uses definitions provided by Cronbach in his seminal paper for coefficient a to show the concepts of reliability, dimensionality, and internal consistency are distinct but interrelated. The article begins with a critique of the definition of reliability and then explores mathematical properties of Cronbach's a. Internal consistency…

Vent System Analysis for the Cryogenic Propellant Storage Transfer Ground Test Article

NASA Technical Reports Server (NTRS)

Hedayat, A

2013-01-01

To test and validate key capabilities and technologies required for future exploration elements such as large cryogenic propulsion stages and propellant depots, NASA is leading the efforts to develop and design the Cryogenic Propellant Storage and Transfer (CPST) Cryogenic Fluid Management (CFM) payload. The primary objectives of CPST payload are to demonstrate: 1) in-space storage of cryogenic propellants for long duration applications; and 2) in-space transfer of cryogenic propellants. The Ground Test Article (GTA) is a technology development version of the CPST payload. The GTA consists of flight-sized and flight-like storage and transfer tanks, liquid acquisition devices, transfer, and pressurization systems with all of the CPST functionality. The GTA is designed to perform integrated passive and active thermal storage and transfer performance testing with liquid hydrogen (LH2) in a vacuum environment. The GTA storage tank is designed to store liquid hydrogen and the transfer tank is designed to be 5% of the storage tank volume. The LH2 transfer subsystem is designed to transfer propellant from one tank to the other utilizing pressure or a pump. The LH2 vent subsystem is designed to prevent over-pressurization of the storage and transfer tanks. An in-house general-purpose computer program was utilized to model and simulate the vent subsystem operation. The modeling, analysis, and the results will be presented in the final paper.

Human intrabony defect regeneration with micro-grafts containing dental pulp stem cells: A randomized controlled clinical trial.

PubMed

Ferrarotti, Francesco; Romano, Federica; Gamba, Mara Noemi; Quirico, Andrea; Giraudi, Marta; Audagna, Martina; Aimetti, Mario

2018-05-19

The goal of this study was to evaluate if dental pulp stem cells (DPSCs) delivered into intrabony defects in a collagen scaffold would enhance the clinical and radiographic parameters of periodontal regeneration. In this randomized controlled trial, 29 chronic periodontitis patients presenting one deep intrabony defect and requiring extraction of one vital tooth were consecutively enrolled. Defects were randomly assigned to test or control treatments which both consisted of the use of minimally invasive surgical technique. The dental pulp of the extracted tooth was mechanically dissociated to obtain micro-grafts rich in autologous DPSCs. Test sites (n=15) were filled with micro-grafts seeded onto collagen sponge, whereas control sites (n=14) with collagen sponge alone. Clinical and radiographic parameters were recorded at baseline, 6 and 12 months postoperatively. Test sites exhibited significantly more PD reduction (4.9 mm versus 3.4 mm), CAL gain (4.5 versus 2.9 mm) and bone defect fill (3.9 versus 1.6 mm) than controls. Moreover, residual PD < 5 mm (93% versus 50%) and CAL gain ≥ 4 mm (73% versus 29%) was significantly more frequent in the test group. Application of DPSCs significantly improved clinical parameters of periodontal regeneration one year after treatment. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 387

NASA Technical Reports Server (NTRS)

1998-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1998-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

Aeronautical Engineering: A Continuing Bibliography with Indexes, Supplement 410. Supplement 410

NASA Technical Reports Server (NTRS)

1999-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

Aeronautical Engineering: A Continuing Bibliography. Supplment 385

NASA Technical Reports Server (NTRS)

1998-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1998-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 386

NASA Technical Reports Server (NTRS)

1998-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1998-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 389

NASA Technical Reports Server (NTRS)

1998-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1998-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

CMLLite: a design philosophy for CML

PubMed Central

2011-01-01

CMLLite is a collection of definitions and processes which provide strong and flexible validation for a document in Chemical Markup Language (CML). It consists of an updated CML schema (schema3), conventions specifying rules in both human and machine-understandable forms and a validator available both online and offline to check conformance. This article explores the rationale behind the changes which have been made to the schema, explains how conventions interact and how they are designed, formulated, implemented and tested, and gives an overview of the validation service. PMID:21999395

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 391

NASA Technical Reports Server (NTRS)

1999-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract.

Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Technology Development Overview

NASA Technical Reports Server (NTRS)

Hughes, Stephen J.; Cheatwood, F. McNeil; Calomino, Anthony M.; Wright, Henry S.

2013-01-01

The successful flight of the Inflatable Reentry Vehicle Experiment (IRVE)-3 has further demonstrated the potential value of Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. This technology development effort is funded by NASA's Space Technology Mission Directorate (STMD) Game Changing Development Program (GCDP). This paper provides an overview of a multi-year HIAD technology development effort, detailing the projects completed to date and the additional testing planned for the future. The effort was divided into three areas: Flexible Systems Development (FSD), Mission Advanced Entry Concepts (AEC), and Flight Validation. FSD consists of a Flexible Thermal Protection Systems (FTPS) element, which is investigating high temperature materials, coatings, and additives for use in the bladder, insulator, and heat shield layers; and an Inflatable Structures (IS) element which includes manufacture and testing (laboratory and wind tunnel) of inflatable structures and their associated structural elements. AEC consists of the Mission Applications element developing concepts (including payload interfaces) for missions at multiple destinations for the purpose of demonstrating the benefits and need for the HIAD technology as well as the Next Generation Subsystems element. Ground test development has been pursued in parallel with the Flight Validation IRVE-3 flight test. A larger scale (6m diameter) HIAD inflatable structure was constructed and aerodynamically tested in the National Full-scale Aerodynamics Complex (NFAC) 40ft by 80ft test section along with a duplicate of the IRVE-3 3m article. Both the 6m and 3m articles were tested with instrumented aerodynamic covers which incorporated an array of pressure taps to capture surface pressure distribution to validate Computational Fluid Dynamics (CFD) model predictions of surface pressure distribution. The 3m article also had a duplicate IRVE-3 Thermal Protection System (TPS) to test in addition to testing with the Aerocover configuration. Both the Aerocovers and the TPS were populated with high contrast targets so that photogrammetric solutions of the loaded surface could be created. These solutions both refined the aerodynamic shape for CFD modeling and provided a deformed shape to validate structural Finite Element Analysis (FEA) models. Extensive aerothermal testing has been performed on the TPS candidates. This testing has been conducted in several facilities across the country. The majority of the testing has been conducted in the Boeing Large Core Arc Tunnel (LCAT). HIAD is continuing to mature testing methodology in this facility and is developing new test sample fixtures and control methodologies to improve understanding and quality of the environments to which the samples are subjected. Additional testing has been and continues to be performed in the NASA LaRC 8ft High Temperature Tunnel, where samples up to 2ft by 2ft are being tested over representative underlying structures incorporating construction features such as sewn seams and through-thickness quilting. With the successful completion to the IRVE-3 flight demonstration, mission planning efforts are ramping up on the development of the HIAD Earth Atmospheric Reenty Test (HEART) which will demonstrate a relevant scale vehicle in relevant environments via a large-scale aeroshell (approximately 8.5m) entering at orbital velocity (approximately 7km/sec) with an entry mass on the order of 4MT. Also, the Build to Print (BTP) hardware built as a risk mitigation for the IRVE-3 project to have a "spare" ready to go in the event of a launch vehicle delivery failure is now available for an additional sub-orbital flight experiment. Mission planning is underway to define a mission that can utilize this existing hardware and help the HIAD project further mature this technology.

Consistency errors in p-values reported in Spanish psychology journals.

PubMed

Caperos, José Manuel; Pardo, Antonio

2013-01-01

Recent reviews have drawn attention to frequent consistency errors when reporting statistical results. We have reviewed the statistical results reported in 186 articles published in four Spanish psychology journals. Of these articles, 102 contained at least one of the statistics selected for our study: Fisher-F , Student-t and Pearson-c 2 . Out of the 1,212 complete statistics reviewed, 12.2% presented a consistency error, meaning that the reported p-value did not correspond to the reported value of the statistic and its degrees of freedom. In 2.3% of the cases, the correct calculation would have led to a different conclusion than the reported one. In terms of articles, 48% included at least one consistency error, and 17.6% would have to change at least one conclusion. In meta-analytical terms, with a focus on effect size, consistency errors can be considered substantial in 9.5% of the cases. These results imply a need to improve the quality and precision with which statistical results are reported in Spanish psychology journals.

Hyperlink-Embedded Journal Articles Improve Statistical Knowledge and Reader Satisfaction

PubMed Central

Saxon, David; Pearson, Alexander T.; Wu, Peter

2015-01-01

Background To practice evidence-based medicine, physicians should have a solid understanding of fundamental epidemiological and biostatistical concepts. Research suggests that only a minority of physicians have such an understanding of biostatistics. Objective To collect pilot data on a novel biostatistical educational tool, a hyperlink-embedded journal article, which is aimed at improving knowledge in biostatistics. Methods Forty-four physicians-in-training participated in this pilot study. Participants completed a pretest consisting of 5 questions about biostatistical terms that would be encountered in the article. They were randomized to either an unmodified journal article or to the same article with hyperlinked biostatistical terms. All participants then completed a posttest that was identical to the pretest. Results Having access to hyperlinked information had a positive association with the number of improved test answers (P = .05). Use of hyperlinks varied, and were seemingly dependent on user comfort with terms; well-understood definitions (“average”) were clicked on a few times (5.5% of participants), whereas more obscure method terms (“Lexis diagram”) were clicked on by 94% of participants. While only 42% of participants stated they would have looked up definitions of the biostatistical terms if they had not been provided in the hyperlinked article, 94% of participants identified the hyperlink tool as something they would use if readily available to them when reading journal articles. Conclusions Results of this pilot study of a novel educational intervention suggest that embedded hyperlinks within journal articles may be a useful tool to teach biostatistical terms to physicians. PMID:26692981

Defining the next generation journal: The NLM–Elsevier interactive publications experiment*

PubMed Central

Siegel, Elliot R.; Lindberg, Donald A.B.; Campbell, Glen P.; Harless, William G.; Goodwin, C. Rory

2010-01-01

Objective A unique collaborative project to identify interactive enhancements to conventional-print journal articles, and to evaluate their contribution to readers’ learning and satisfaction. Hypothesis It was hypothesized that (a) the enhanced article would yield more knowledge acquisition than the original article; (b) the interactivity aspects of the enhanced article would measurably contribute to the acquisition of knowledge; and (c) the enhancements to the original article would increase reader acceptance. Methods Fifteen SNMA medical students, assumed to have a greater generational familiarity and comfort level with interactive electronic media, reviewed 12 articles published in three Elsevier clinical and basic science journals. They used the Student National Medical Association’s asynchronous online discussion forum over a four month period to suggest desired enhancements to improve learning. “Prognostic Factors in Stage T1 Bladder Cancer”, published in the journal Urology was selected by the investigators as presenting the best opportunity to incorporate many of the students’ suggested interactive and presentational enhancements in the limited timeframe available prior to the established test date. Educational, statistical, and medical consultants assisted in designing a test protocol in which 51 second to fourth year medical students were randomly assigned to experimental and control conditions, and were administered either the original or enhanced interactive version of the article on individual computer workstations. Test subjects consisted of 23 participants in the control group (8 males, 15 females) and 28 participants in the experimental group (9 males, 19 females). All subjects completed pre- and post-test instruments which measured their knowledge gain on 30 true-false and multiple-choice questions, along with 7 Likert-type questions measuring acceptance of the articles’ format. Time to completion was recorded with the experimental group taking 22 min on average compared to 18 min for the controls; pre- and post-test times were 6 and 7 min, respectively. Statistical comparisons were based on change scores using either the Student t-test or the Two Way Analysis of Variance or Covariance. Significance was set at α = 0.05 or better. Results on the dependent measure of knowledge acquisition showed no difference overall on the 30 questions, but learning gain was statistically significant for the subset of 10 questions that measured gain on content that was accessible by the user-invoked interactive features of the enhanced article. Further analyses revealed significant interactions by student year and gender. Second year students (11 in the control group, 8 in the experimental group) were the best performers in terms of knowledge acquisition from both articles. The female medical students received a larger learning gain from journal enhancements and interactivity components than their male counterparts. Acceptance overall was greater for the experimental group who rated the experience more favorably than the controls. Conclusions Failure to consider human factors such as gender and learning style may obscure underlying differences and their impact on the interactive aspects of scientific publications. Preliminary findings suggest the need for further study to include a heavier focus on interactivity apart from presentational enhancements; a more rigorous treatment of time as a specific variable; and an expanded experimental design that evaluates acquisition, understanding, integration and acceptance as dependent measures. PMID:21165152

Effect of dietary fiber on constipation: A meta analysis

PubMed Central

Yang, Jing; Wang, Hai-Peng; Zhou, Li; Xu, Chun-Fang

2012-01-01

AIM: To investigate the effect of dietary fiber intake on constipation by a meta-analysis of randomized controlled trials (RCTs). METHODS: We searched Ovid MEDLINE (from 1946 to October 2011), Cochrane Library (2011), PubMed for articles on dietary fiber intake and constipation using the terms: constipation, fiber, cellulose, plant extracts, cereals, bran, psyllium, or plantago. References of important articles were searched manually for relevant studies. Articles were eligible for the meta-analysis if they were high-quality RCTs and reported data on stool frequency, stool consistency, treatment success, laxative use and gastrointestinal symptoms. The data were extracted independently by two researchers (Yang J and Wang HP) according to the described selection criteria. Review manager version 5 software was used for analysis and test. Weighted mean difference with 95%CI was used for quantitative data, odds ratio (OR) with 95%CI was used for dichotomous data. Both I2 statistic with a cut-off of ≥ 50% and the χ2 test with a P value < 0.10 were used to define a significant degree of heterogeneity. RESULTS: We searched 1322 potential relevant articles, 19 of which were retrieved for further assessment, 14 studies were excluded for various reasons, five studies were included in the analysis. Dietary fiber showed significant advantage over placebo in stool frequency (OR = 1.19; 95%CI: 0.58-1.80, P < 0.05). There was no significant difference in stool consistency, treatment success, laxative use and painful defecation between the two groups. Stool frequency were reported by five RCTs, all results showed either a trend or a significant difference in favor of the treatment group, number of stools per week increased in treatment group than in placebo group (OR = 1.19; 95%CI: 0.58-1.80, P < 0.05), with no significant heterogeneity among studies (I2= 0, P = 0.77). Four studies evaluated stool consistency, one of them presented outcome in terms of percentage of hard stool, which was different from others, so we included the other three studies for analysis. Two studies reported treatment success. There was significant heterogeneity between the studies (P < 0.1, I2 > 50%). Three studies reported laxative use, quantitative data was shown in one study, and the pooled analysis of the other two studies showed no significant difference between treatment and placebo groups in laxative use (OR = 1.07; 95%CI 0.51-2.25), and no heterogeneity was found (P = 0.84, I2= 0). Three studies evaluated painful defecation: one study presented both quantitative and dichotomous data, the other two studies reported quantitative and dichotomous data separately. We used dichotomous data for analysis. CONCLUSION: Dietary fiber intake can obviously increase stool frequency in patients with constipation. It does not obviously improve stool consistency, treatment success, laxative use and painful defecation. PMID:23326148

Boredom proneness--the development and correlates of a new scale.

PubMed

Farmer, R; Sundberg, N D

1986-01-01

This article reports the development, validation, and correlates of a self-report measure of boredom proneness. The 28-item Boredom Proneness (BP) Scale demonstrates satisfactory levels of internal consistency (coefficient alpha = .79) and test-retest reliability (r = .83) over a 1-week interval. Evidence of validity for the BP is supported by correlations with other boredom measures and from a set of studies evaluating interest and attention in the classroom. Other hypothesized relationships with boredom were tested, with significant positive associations found with depression, hopelessness, perceived effort, loneliness, and amotivational orientation. Additional findings indicate boredom proneness to be negatively related to life satisfaction and autonomy orientation. The relationship of boredom to other affective states is discussed, and directions for future research are outlined.

The new Intragroup Conflict Scale: testing and psychometric properties.

PubMed

Cox, Kathleen B

2014-01-01

The importance of healthy work environments has received attention. Health care organizations are plagued with conflict which is detrimental to work environments. Thus, conflict must be studied. The purpose of this article is to describe the testing of a measure of conflict. A survey was used to evaluate the psychometric properties. The sample consisted of 430 nurses at an academic medical center. Using principal component analysis (PCA) with varimax rotation, a six-factor solution (30 items) that explained 74.3% of variance emerged. Coefficient alpha ranged from .95 to .81. Correlations with existing scales supported construct validity (r = -.32(-)-.58). The results are encouraging. Use of the scale may provide insight into the impact of conflict on patient, staff, and organizational outcomes.

Pay as You Speed, ISA with incentives for not speeding: a case of test driver recruitment.

PubMed

Lahrmann, Harry; Agerholm, Niels; Tradisauskas, Nerius; Næss, Teresa; Juhl, Jens; Harms, Lisbeth

2012-09-01

The Intelligent Speed Adaptation (ISA) project we describe in this article is based on Pay as You Drive principles. These principles assume that the ISA equipment informs a driver of the speed limit, warns the driver when speeding and calculates penalty points. Each penalty point entails the reduction of a 30% discount on the driver's car insurance premium, which therefore produced the name, Pay as You Speed. The ISA equipment consists of a GPS-based On Board Unit with a mobile phone connection to a web server. The project was planned for a three-year test period with 300 young car drivers, but it never succeeded in recruiting that number of drivers. After several design changes, the project eventually went forward with 153 test drivers of all ages. This number represents approximately one thousandth of all car owners in the proving ground of North Jutland in Denmark. Furthermore the project was terminated before its scheduled closing date. This article describes the project with an emphasis on recruitment efforts and the project's progress. We include a discussion of possible explanations for the failure to recruit volunteers for the project and reflect upon the general barriers to using ISA with ordinary drivers. Copyright © 2011 Elsevier Ltd. All rights reserved.

Educational testing validity and reliability in pharmacy and medical education literature.

PubMed

Hoover, Matthew J; Jung, Rose; Jacobs, David M; Peeters, Michael J

2013-12-16

To evaluate and compare the reliability and validity of educational testing reported in pharmacy education journals to medical education literature. Descriptions of validity evidence sources (content, construct, criterion, and reliability) were extracted from articles that reported educational testing of learners' knowledge, skills, and/or abilities. Using educational testing, the findings of 108 pharmacy education articles were compared to the findings of 198 medical education articles. For pharmacy educational testing, 14 articles (13%) reported more than 1 validity evidence source while 83 articles (77%) reported 1 validity evidence source and 11 articles (10%) did not have evidence. Among validity evidence sources, content validity was reported most frequently. Compared with pharmacy education literature, more medical education articles reported both validity and reliability (59%; p<0.001). While there were more scholarship of teaching and learning (SoTL) articles in pharmacy education compared to medical education, validity, and reliability reporting were limited in the pharmacy education literature.

Mass media, stigma, and disclosure of HIV test results: multilevel analysis in the Eastern Cape, South Africa.

PubMed

Hutchinson, P L; Mahlalela, X; Yukich, Josh

2007-12-01

In this article, we examine the role of mass media and interpersonal communication in affecting knowledge of HIV/AIDS, reducing stigma, using condoms, and increasing the likelihood of disclosing HIV test results to sexual partners and family members. Data from a 2002 household survey in the Eastern Cape Province of South Africa are used to measure levels of stigma, interpersonal communication, willingness to disclosure HIV test results and condom use. We use a multilevel framework that accounts for the social context in which individuals access information, gauge social norms, and make decisions about the costs and benefits of HIV testing and disclosure. The results provide support for the positive effects of both media exposure and informal social networks on ideational factors, namely changes in knowledge and stigma, which lead to behavior change. Consistent with common models of health communication dynamics, these latter factors dominate decisions regarding disclosure of HIV test results and condom use.

Reliability and main findings of the FEES-Tensilon Test in patients with myasthenia gravis and dysphagia.

PubMed

Im, Sun; Suntrup-Krueger, Sonja; Colbow, Sigrid; Sauer, Sonja; Claus, Inga; Meuth, Sven G; Dziewas, Rainer; Warnecke, Tobias

2018-05-26

Diagnosis of pharyngeal dysphagia caused by myasthenia gravis (MG) based on clinical examination alone is often challenging. Flexible endoscopic evaluation of swallowing (FEES) combined with Tensilon (edrophonium) application, referred to as the FEES-Tensilon Test, was developed to improve diagnostic accuracy and to detect the main symptoms of pharyngeal dysphagia in MG. Here we investigated inter- and intra-rater reliability of the FEES-Tensilon Test and analyzed the main endoscopic findings. Four experienced raters reviewed a total of 20 FEES-Tensilon-Test videos in randomized order. Residue severity was graded at 4 different pharyngeal spaces before and after Tensilon administration. All interpretations were performed twice per rater, 4 weeks apart (a total of 160 scorings). Intra-rater test-retest reliability and inter-rater reliability levels were calculated. The most frequent FEES findings in MG patients before Tensilon application were prominent residues of semi solids spread all over the hypopharynx in varying locations. The reliability level in the interpretation of the FEES-Tensilon test was excellent regardless of the raters' profession or years of experience with FEES. All 4 raters showed high inter- and intra- reliability levels in interpreting the FEES-Tensilon Test based on residue clearance (kappa=0.922, 0.981). Degree of residue normalization in the vallecular space after Tensilon application showed the highest inter- and intra-rater reliability level (kappa=0.863, 0.957) followed by the epiglottis (kappa=0.813, 0.946) and pyriform sinuses (kappa=0.836, 0.929). Interpretation of the FEES-Tensilon Test based on residue severity and degree of Tensilon clearance, especially in the vallecular space, is consistent and reliable. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Development of a Post-Installed Deepwater Monitoring System

NASA Technical Reports Server (NTRS)

Seaman, C.; Brower, D. V.; Tang, H.; Le, S.

2015-01-01

A monitoring system that can be deployed on already existing deep water risers and flowlines has been developed. This paper describes the design concepts and testing that was performed in developing the monitoring system. A major challenge of a post-installed instrumentation system is to ensure adequate coupling is achieved between the instruments and the riser or flowline. This work investigates the sensor coupling for pipelines that are suspended in both the water column (from topside platform to the seabed) and for those that are located directly on the seabed. These different environments have resulted in two sensor attachment methods: (1) subsea adhesive sensor clamp design and (2) a friction surface sensor attachment method. This paper presents the adhesive attachment method. The monitoring elements consist of fiber optic sensors that are encased in a polyurethane clamp. With a subsea adhesive, the clamp can be installed by divers in shallow depths or by use of an ROV for deeper applications. The NASA Johnson Space Center was initially involved in the selection and testing of subsea adhesives. It was determined that up to 75 percent of the bonding strength could be achieved with the adhesive from optimal dry bonding versus bonding in submerged sea water environments. The next phase of the study involved the design, fabrication, and testing of several prototype clamps that contained the fiber optic sensors. A mold was produced by NASA using 3-D printing methods that allowed the fabrication of subscale test articles that would accommodate 4-inch and 8-inch diameter pipes. The clamps were installed with adhesive in a "wet" environment on the pipe test articles and tested in the NASA Structures Test Laboratory. The tension/compression and bending tests showed that the prototype sensor clamps achieved good coupling, and could provide high quality strain measurement for active monitoring.

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 2 2014-10-01 2014-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 2 2012-10-01 2012-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-4 - First Article Approval-Government Testing.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 2 2011-10-01 2011-10-01 false First Article Approval... Clauses 52.209-4 First Article Approval—Government Testing. As prescribed in 9.308-2 (a) and (b), insert the following clause: First Article Approval—Government Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 2 2013-10-01 2013-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

48 CFR 52.209-3 - First Article Approval-Contractor Testing.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false First Article Approval... Clauses 52.209-3 First Article Approval—Contractor Testing. As prescribed in 9.308-1 (a) and (b), insert the following clause: First Article Approval—Contractor Testing (SEP 1989) [Contracting Officer shall...

Prenatal screening: current practice, new developments, ethical challenges.

PubMed

de Jong, Antina; Maya, Idit; van Lith, Jan M M

2015-01-01

Prenatal screening pathways, as nowadays offered in most Western countries consist of similar tests. First, a risk-assessment test for major aneuploides is offered to pregnant women. In case of an increased risk, invasive diagnostic tests, entailing a miscarriage risk, are offered. For decades, only conventional karyotyping was used for final diagnosis. Moreover, several foetal ultrasound scans are offered to detect major congenital anomalies, but the same scans also provide relevant information for optimal support of the pregnancy and the delivery. Recent developments in prenatal screening include the application of microarrays that allow for identifying a much broader range of abnomalities than karyotyping, and non-invasive prenatal testing (NIPT) that enables reducing the number of invasive tests for aneuploidies considerably. In the future, broad NIPT may become possible and affordable. This article will briefly address the ethical issues raised by these technological developments. First, a safe NIPT may lead to routinisation and as such challenge the central issue of informed consent and the aim of prenatal screening: to offer opportunity for autonomous reproductive choice. Widening the scope of prenatal screening also raises the question to what extent 'reproductive autonomy' is meant to expand. Finally, if the same test is used for two different aims, namely detection of foetal anomalies and pregnancy-related problems, non-directive counselling can no longer be taken as a standard. Our broad outline of the ethical issues is meant as an introduction into the more detailed ethical discussions about prenatal screening in the other articles of this special issue. © 2014 John Wiley & Sons Ltd.

Dual-axis resonance testing of wind turbine blades

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, Scott; Musial, Walter; White, Darris

An apparatus (100) for fatigue testing test articles (104) including wind turbine blades. The apparatus (100) includes a test stand (110) that rigidly supports an end (106) of the test article (104). An actuator assembly (120) is attached to the test article (104) and is adapted for substantially concurrently imparting first and second forcing functions in first and second directions on the test article (104), with the first and second directions being perpendicular to a longitudinal axis. A controller (130) transmits first and second sets of displacement signals (160, 164) to the actuator assembly (120) at two resonant frequencies ofmore » the test system (104). The displacement signals (160, 164) initiate the actuator assembly (120) to impart the forcing loads to concurrently oscillate the test article (104) in the first and second directions. With turbine blades, the blades (104) are resonant tested concurrently for fatigue in the flapwise and edgewise directions.« less

Finite Element Analysis and Test Results Comparison for the Hybrid Wing Body Center Section Test Article

NASA Technical Reports Server (NTRS)

Przekop, Adam; Jegley, Dawn C.; Rouse, Marshall; Lovejoy, Andrew E.

2016-01-01

This report documents the comparison of test measurements and predictive finite element analysis results for a hybrid wing body center section test article. The testing and analysis efforts were part of the Airframe Technology subproject within the NASA Environmentally Responsible Aviation project. Test results include full field displacement measurements obtained from digital image correlation systems and discrete strain measurements obtained using both unidirectional and rosette resistive gauges. Most significant results are presented for the critical five load cases exercised during the test. Final test to failure after inflicting severe damage to the test article is also documented. Overall, good comparison between predicted and actual behavior of the test article is found.

Does pharmaceutical advertising affect journal publication about dietary supplements?

PubMed

Kemper, Kathi J; Hood, Kaylene L

2008-04-09

Advertising affects consumer and prescriber behaviors. The relationship between pharmaceutical advertising and journals' publication of articles regarding dietary supplements (DS) is unknown. We reviewed one year of the issues of 11 major medical journals for advertising and content about DS. Advertising was categorized as pharmaceutical versus other. Articles about DS were included if they discussed vitamins, minerals, herbs or similar products. Articles were classified as major (e.g., clinical trials, cohort studies, editorials and reviews) or other (e.g., case reports, letters, news, and others). Articles' conclusions regarding safety and effectiveness were coded as negative (unsafe or ineffective) or other (safe, effective, unstated, unclear or mixed). Journals' total pages per issue ranged from 56 to 217 while advertising pages ranged from 4 to 88; pharmaceutical advertisements (pharmads) accounted for 1.5% to 76% of ad pages. Journals with the most pharmads published significantly fewer major articles about DS per issue than journals with the fewest pharmads (P < 0.01). Journals with the most pharmads published no clinical trials or cohort studies about DS. The percentage of major articles concluding that DS were unsafe was 4% in journals with fewest and 67% among those with the most pharmads (P = 0.02). The percentage of articles concluding that DS were ineffective was 50% higher among journals with more than among those with fewer pharmads (P = 0.4). These data are consistent with the hypothesis that increased pharmaceutical advertising is associated with publishing fewer articles about DS and publishing more articles with conclusions that DS are unsafe. Additional research is needed to test alternative hypotheses for these findings in a larger sample of more diverse journals.

Long-term opioid treatment of chronic nonmalignant pain: unproven efficacy and neglected safety?

PubMed Central

Kissin, Igor

2013-01-01

Background For the past 30 years, opioids have been used to treat chronic nonmalignant pain. This study tests the following hypotheses: (1) there is no strong evidence-based foundation for the conclusion that long-term opioid treatment of chronic nonmalignant pain is effective; and (2) the main problem associated with the safety of such treatment – assessment of the risk of addiction – has been neglected. Methods Scientometric analysis of the articles representing clinical research in this area was performed to assess (1) the quality of presented evidence (type of study); and (2) the duration of the treatment phase. The sufficiency of representation of addiction was assessed by counting the number of articles that represent (1) editorials; (2) articles in the top specialty journals; and (3) articles with titles clearly indicating that the addiction-related safety is involved (topic-in-title articles). Results Not a single randomized controlled trial with opioid treatment lasting >3 months was found. All studies with a duration of opioid treatment ≥6 months (n = 16) were conducted without a proper control group. Such studies cannot provide the consistent good-quality evidence necessary for a strong clinical recommendation. There were profound differences in the number of addiction articles related specifically to chronic nonmalignant pain patients and to opioid addiction in general. An inadequate number of chronic pain-related publications were observed with all three types of counted articles: editorials, articles in the top specialty journals, and topic-in-title articles. Conclusion There is no strong evidence-based foundation for the conclusion that long-term opioid treatment of chronic nonmalignant pain is effective. The above identified signs indicating neglect of addiction associated with the opioid treatment of chronic nonmalignant pain were present. PMID:23874119

Does pharmaceutical advertising affect journal publication about dietary supplements?

PubMed Central

Kemper, Kathi J; Hood, Kaylene L

2008-01-01

Background Advertising affects consumer and prescriber behaviors. The relationship between pharmaceutical advertising and journals' publication of articles regarding dietary supplements (DS) is unknown. Methods We reviewed one year of the issues of 11 major medical journals for advertising and content about DS. Advertising was categorized as pharmaceutical versus other. Articles about DS were included if they discussed vitamins, minerals, herbs or similar products. Articles were classified as major (e.g., clinical trials, cohort studies, editorials and reviews) or other (e.g., case reports, letters, news, and others). Articles' conclusions regarding safety and effectiveness were coded as negative (unsafe or ineffective) or other (safe, effective, unstated, unclear or mixed). Results Journals' total pages per issue ranged from 56 to 217 while advertising pages ranged from 4 to 88; pharmaceutical advertisements (pharmads) accounted for 1.5% to 76% of ad pages. Journals with the most pharmads published significantly fewer major articles about DS per issue than journals with the fewest pharmads (P < 0.01). Journals with the most pharmads published no clinical trials or cohort studies about DS. The percentage of major articles concluding that DS were unsafe was 4% in journals with fewest and 67% among those with the most pharmads (P = 0.02). The percentage of articles concluding that DS were ineffective was 50% higher among journals with more than among those with fewer pharmads (P = 0.4). Conclusion These data are consistent with the hypothesis that increased pharmaceutical advertising is associated with publishing fewer articles about DS and publishing more articles with conclusions that DS are unsafe. Additional research is needed to test alternative hypotheses for these findings in a larger sample of more diverse journals. PMID:18400092

Pursuing the Qualities of a "Good" Test

ERIC Educational Resources Information Center

Coniam, David

2014-01-01

This article examines the issue of the quality of teacher-produced tests, limiting itself in the current context to objective, multiple-choice tests. The article investigates a short, two-part 20-item English language test. After a brief overview of the key test qualities of reliability and validity, the article examines the two subtests in terms…

On Laminar to Turbulent Transition of Arc-Jet Flow in the NASA Ames Panel Test Facility

NASA Technical Reports Server (NTRS)

Gokcen, Tahir; Alunni, Antonella I.

2012-01-01

This paper provides experimental evidence and supporting computational analysis to characterize the laminar to turbulent flow transition in a high enthalpy arc-jet facility at NASA Ames Research Center. The arc-jet test data obtained in the 20 MW Panel Test Facility include measurements of surface pressure and heat flux on a water-cooled calibration plate, and measurements of surface temperature on a reaction-cured glass coated tile plate. Computational fluid dynamics simulations are performed to characterize the arc-jet test environment and estimate its parameters consistent with the facility and calibration measurements. The present analysis comprises simulations of the nonequilibrium flowfield in the facility nozzle, test box, and flowfield over test articles. Both laminar and turbulent simulations are performed, and the computed results are compared with the experimental measurements, including Stanton number dependence on Reynolds number. Comparisons of computed and measured surface heat fluxes (and temperatures), along with the accompanying analysis, confirm that that the boundary layer in the Panel Test Facility flow is transitional at certain archeater conditions.

Writing for Publication: A Guide for Counseling Practice Articles

ERIC Educational Resources Information Center

Falco, Lia D.; McCarthy, Christopher J.

2013-01-01

Practice articles are critical to scholarship in the counseling field. This article provides readers with practical guidelines for the content and organization of practice articles, with the broad objective of developing a framework for presenting such contributions that may be consistently utilized within the counseling literature. A consistent…

When Scholarly Publishing Goes Awry: Educating Ourselves and Our Patrons about Retracted Articles

ERIC Educational Resources Information Center

Thielen, Joanna

2018-01-01

Retracted articles, articles that violate professional ethics, are an unsettling, yet integral, part of the scholarly publishing process seldom discussed in the academy. Unfortunately, article retractions continue to rise across all disciplines. Although academic librarians consistently provide instruction on scholarly publishing, little has been…

Structural Benchmark Creep Testing for Microcast MarM-247 Advanced Stirling Convertor E2 Heater Head Test Article SN18

NASA Technical Reports Server (NTRS)

Krause, David L.; Brewer, Ethan J.; Pawlik, Ralph

2013-01-01

This report provides test methodology details and qualitative results for the first structural benchmark creep test of an Advanced Stirling Convertor (ASC) heater head of ASC-E2 design heritage. The test article was recovered from a flight-like Microcast MarM-247 heater head specimen previously used in helium permeability testing. The test article was utilized for benchmark creep test rig preparation, wall thickness and diametral laser scan hardware metrological developments, and induction heater custom coil experiments. In addition, a benchmark creep test was performed, terminated after one week when through-thickness cracks propagated at thermocouple weld locations. Following this, it was used to develop a unique temperature measurement methodology using contact thermocouples, thereby enabling future benchmark testing to be performed without the use of conventional welded thermocouples, proven problematic for the alloy. This report includes an overview of heater head structural benchmark creep testing, the origin of this particular test article, test configuration developments accomplished using the test article, creep predictions for its benchmark creep test, qualitative structural benchmark creep test results, and a short summary.

Reactivity to Cannabis Cues in Virtual Reality Environments†

PubMed Central

Bordnick, Patrick S.; Copp, Hilary L.; Traylor, Amy; Graap, Ken M.; Carter, Brian L.; Walton, Alicia; Ferrer, Mirtha

2014-01-01

Virtual reality (VR) cue environments have been developed and successfully tested in nicotine, cocaine, and alcohol abusers. Aims in the current article include the development and testing of a novel VR cannabis cue reactivity assessment system. It was hypothesized that subjective craving levels and attention to cannabis cues would be higher in VR environments merits with cannabis cues compared to VR neutral environments. Twenty nontreatment-seeking current cannabis smokers participated in the VR cue trial. During the VR cue trial, participants were exposed to four virtual environments that contained audio, visual, olfactory, and vibrotactile sensory stimuli. Two VR environments contained cannabis cues that consisted of a party room in which people were smoking cannabis and a room containing cannabis paraphernalia without people. Two VR neutral rooms without cannabis cues consisted of a digital art gallery with nature videos. Subjective craving and attention to cues were significantly higher in the VR cannabis environments compared to the VR neutral environments. These findings indicate that VR cannabis cue reactivity may offer a new technology-based method to advance addiction research and treatment. PMID:19705672

Tools, strategies and qualitative approach in relation to suicidal attempts and ideation in the elderly.

PubMed

Cavalcante, Fátima Gonçalves; Minayo, Maria Cecília de Souza; Gutierrez, Denise Machado Duran; de Sousa, Girliani Silva; da Silva, Raimunda Magalhães; Moura, Rosylaine; Meneghel, Stela Nazareth; Grubits, Sonia; Conte, Marta; Cavalcante, Ana Célia Sousa; Figueiredo, Ana Elisa Bastos; Mangas, Raimunda Matilde do Nascimento; Fachola, María Cristina Heuguerot; Izquierdo, Giovane Mendieta

2015-06-01

The article analyses the quality and consistency of a comprehensive interview guide, adapted to study attempted suicide and its ideation among the elderly, and imparts the method followed in applying this tool. The objective is to show how the use of a semi-structured interview and the organization and data analysis set-up were tested and perfected by a network of researchers from twelve universities or research centers in Brazil, Uruguay and Colombia. The method involved application and evaluation of the tool and joint production of an instruction manual on data collection, systematization and analysis. The methodology was followed in 67 interviews with elderly people of 60 or older and in 34 interviews with health professionals in thirteen Brazilian municipalities and in Montevideo and Bogotá, allowing the consistency of the tool and the applicability of the method to be checked, during the process and at the end. The enhanced guide and the instructions for reproducing it are presented herein. The results indicate the suitability and credibility of this methodological approach, tested and certified in interdisciplinary and interinstitutional terms.

Psychometric Evaluation of Kingston Caregiver Stress Scale.

PubMed

Sadak, Tatiana; Korpak, Anna; Wright, Jacob D; Lee, Mee Kyung; Noel, Margaret; Buckwalter, Kathleen; Borson, Soo

2017-01-01

Standardized measurement of caregiver stress is a component of Medicare's new health care benefit supporting care planning for people with dementia. In this article we identify existing measures of caregiver stress, strain and burden and propose specific criteria for choosing tools that may be suitable for wide use in primary care settings. We reviewed 22 measures and identified one, the Kingston Caregiver Stress Scale (KCSS), which met all the proposed criteria but had not been studied in a U.S. We conducted a psychometric evaluation of KCSS to determine its potential usefulness as a care planning tool with a U.S. We examined the internal consistency, test-retest reliability, component structure, and relationship to depression and anxiety in 227 dementia caregivers at two U.S. sites. The KCSS has high internal consistency and test-retest reliability, a strong factor structure, and moderate to high correlations with caregiver depression and anxiety. KCSS is a good candidate for use as part of comprehensive care planning for people with dementia and their caregivers. Routine assessment of caregiver stress in clinical care may facilitate timely intervention and potentially improve both patient and caregiver outcomes.

Systematic review of studies on measurement properties of instruments for adults published in the American Journal of Occupational Therapy, 2009-2013.

PubMed

Yuen, Hon K; Austin, Sarah L

2014-01-01

We describe the methodological quality of recent studies on instrument development and testing published in the American Journal of Occupational Therapy (AJOT). We conducted a systematic review using the COnsensus-based Standards for the selection of health status Measurement INstruments (COSMIN) checklist to appraise 48 articles on measurement properties of assessments for adults published in AJOT between 2009 and 2013. Most studies had adequate methodological quality in design and statistical analysis. Common methodological limitations included that methods used to examine internal consistency were not consistently linked to the theoretical constructs underpinning assessments; participants in some test-retest reliability studies were not stable during the interim period; and in several studies of reliability and convergent validity, sample sizes were inadequate. AJOT's dissemination of psychometric research evidence has made important contributions to moving the profession toward the American Occupational Therapy Association's Centennial Vision. This study's results provide a benchmark by which to evaluate future accomplishments. Copyright © 2014 by the American Occupational Therapy Association, Inc.

Effects of Contributor Experience on the Quality of Health-Related Wikipedia Articles.

PubMed

Holtz, Peter; Fetahu, Besnik; Kimmerle, Joachim

2018-05-10

Consulting the Internet for health-related information is a common and widespread phenomenon, and Wikipedia is arguably one of the most important resources for health-related information. Therefore, it is relevant to identify factors that have an impact on the quality of health-related Wikipedia articles. In our study we have hypothesized a positive effect of contributor experience on the quality of health-related Wikipedia articles. We mined the edit history of all (as of February 2017) 18,805 articles that were listed in the categories on the portal health & fitness in the English language version of Wikipedia. We identified tags within the articles' edit histories, which indicated potential issues with regard to the respective article's quality or neutrality. Of all of the sampled articles, 99 (99/18,805, 0.53%) articles had at some point received at least one such tag. In our analysis we only considered those articles with a minimum of 10 edits (10,265 articles in total; 96 tagged articles, 0.94%). Additionally, to test our hypothesis, we constructed contributor profiles, where a profile consisted of all the articles edited by a contributor and the corresponding number of edits contributed. We did not differentiate between rollbacks and edits with novel content. Nonparametric Mann-Whitney U-tests indicated a higher number of previously edited articles for editors of the nontagged articles (mean rank tagged 2348.23, mean rank nontagged 5159.29; U=9.25, P<.001). However, we did not find a significant difference for the contributors' total number of edits (mean rank tagged 4872.85, mean rank nontagged 5135.48; U=0.87, P=.39). Using logistic regression analysis with the respective article's number of edits and number of editors as covariates, only the number of edited articles yielded a significant effect on the article's status as tagged versus nontagged (dummy-coded; Nagelkerke R 2 for the full model=.17; B [SE B]=-0.001 [0.00]; Wald c 2 [1]=19.70; P<.001), whereas we again found no significant effect for the mere number of edits (Nagelkerke R 2 for the full model=.15; B [SE B]=0.000 [0.01]; Wald c 2 [1]=0.01; P=.94). Our findings indicate an effect of contributor experience on the quality of health-related Wikipedia articles. However, only the number of previously edited articles was a predictor of the articles' quality but not the mere volume of edits. More research is needed to disentangle the different aspects of contributor experience. We have discussed the implications of our findings with respect to ensuring the quality of health-related information in collaborative knowledge-building platforms. ©Peter Holtz, Besnik Fetahu, Joachim Kimmerle. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 10.05.2018.

Community Reintegration, Participation, and Employment Issues in Veterans and Service Members With Traumatic Brain Injury.

PubMed

Dillahunt-Aspillaga, Christina; Powell-Cope, Gail

2018-02-01

Traumatic brain injury (TBI) has been called the signature injury of the post-9/11 wars in Iraq, Afghanistan, and neighboring countries. Although similarities exist between veterans and service members with TBI, levels of severity and different constellations of coexisting comorbid conditions affect them differently. These conditions affect physical, cognitive, and emotional function, which in turn can complicate community reintegration (CR), or the ability to return to family, vocational, and community life. This special supplement of the Archives of Physical Medicine and Rehabilitation consists of articles written by accomplished teams from multiple disciplines, including anthropology, neuropsychology, nursing, occupational therapy, psychology, and rehabilitation sciences. Each article brings a different perspective to bear on what CR means for veterans and service members from examination of predictors and perceptions of veterans and service members and others to measurement studies. Collectively, this group of articles represents current thinking about CR and lays the groundwork for testing interventions to improve CR outcomes for veterans and service members (eg, employment, living situation, family life). Published by Elsevier Inc.

INTERIM CRYOGENIC PROPULSION STAGE TEST ARTICLE UNLOADED PRIOR T

NASA Image and Video Library

2016-06-20

TWO CRANES LIFT THE APPROXIMATELY 8,000-POUND INTERIM CRYOGENIC PROPULSION STAGE TEST ARTICLE OUT OF ITS CRATE AT MARSHALL. THE TEST ARTICLE ARRIVED AT MARSHALL SPACE FLIGHT CENTER VIA BARGE ON THE TENNESSEE RIVER AND WAS TRANSPORTED TO BUILDING 4649 WHERE TESTING WILL BEGIN.

SLS Intertank Test Article, ITA, is attached to crosshead of loa

NASA Image and Video Library

2018-04-04

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. Rob Ziegler, (L), and Roger Myrick (R), of Aerie Aerospace attach load lines to Aft Load Ring of Intertank Test Article.

Effects of Contributor Experience on the Quality of Health-Related Wikipedia Articles

PubMed Central

Fetahu, Besnik; Kimmerle, Joachim

2018-01-01

Background Consulting the Internet for health-related information is a common and widespread phenomenon, and Wikipedia is arguably one of the most important resources for health-related information. Therefore, it is relevant to identify factors that have an impact on the quality of health-related Wikipedia articles. Objective In our study we have hypothesized a positive effect of contributor experience on the quality of health-related Wikipedia articles. Methods We mined the edit history of all (as of February 2017) 18,805 articles that were listed in the categories on the portal health & fitness in the English language version of Wikipedia. We identified tags within the articles’ edit histories, which indicated potential issues with regard to the respective article’s quality or neutrality. Of all of the sampled articles, 99 (99/18,805, 0.53%) articles had at some point received at least one such tag. In our analysis we only considered those articles with a minimum of 10 edits (10,265 articles in total; 96 tagged articles, 0.94%). Additionally, to test our hypothesis, we constructed contributor profiles, where a profile consisted of all the articles edited by a contributor and the corresponding number of edits contributed. We did not differentiate between rollbacks and edits with novel content. Results Nonparametric Mann-Whitney U-tests indicated a higher number of previously edited articles for editors of the nontagged articles (mean rank tagged 2348.23, mean rank nontagged 5159.29; U=9.25, P<.001). However, we did not find a significant difference for the contributors’ total number of edits (mean rank tagged 4872.85, mean rank nontagged 5135.48; U=0.87, P=.39). Using logistic regression analysis with the respective article’s number of edits and number of editors as covariates, only the number of edited articles yielded a significant effect on the article’s status as tagged versus nontagged (dummy-coded; Nagelkerke R2 for the full model=.17; B [SE B]=-0.001 [0.00]; Wald c2 [1]=19.70; P<.001), whereas we again found no significant effect for the mere number of edits (Nagelkerke R2 for the full model=.15; B [SE B]=0.000 [0.01]; Wald c2 [1]=0.01; P=.94). Conclusions Our findings indicate an effect of contributor experience on the quality of health-related Wikipedia articles. However, only the number of previously edited articles was a predictor of the articles’ quality but not the mere volume of edits. More research is needed to disentangle the different aspects of contributor experience. We have discussed the implications of our findings with respect to ensuring the quality of health-related information in collaborative knowledge-building platforms. PMID:29748161

Literature information in PubChem: associations between PubChem records and scientific articles.

PubMed

Kim, Sunghwan; Thiessen, Paul A; Cheng, Tiejun; Yu, Bo; Shoemaker, Benjamin A; Wang, Jiyao; Bolton, Evan E; Wang, Yanli; Bryant, Stephen H

2016-01-01

PubChem is an open archive consisting of a set of three primary public databases (BioAssay, Compound, and Substance). It contains information on a broad range of chemical entities, including small molecules, lipids, carbohydrates, and (chemically modified) amino acid and nucleic acid sequences (including siRNA and miRNA). Currently (as of Nov. 2015), PubChem contains more than 150 million depositor-provided chemical substance descriptions, 60 million unique chemical structures, and 225 million biological activity test results provided from over 1 million biological assay records. Many PubChem records (substances, compounds, and assays) include depositor-provided cross-references to scientific articles in PubMed. Some PubChem contributors provide bioactivity data extracted from scientific articles. Literature-derived bioactivity data complement high-throughput screening (HTS) data from the concluded NIH Molecular Libraries Program and other HTS projects. Some journals provide PubChem with information on chemicals that appear in their newly published articles, enabling concurrent publication of scientific articles in journals and associated data in public databases. In addition, PubChem links records to PubMed articles indexed with the Medical Subject Heading (MeSH) controlled vocabulary thesaurus. Literature information, both provided by depositors and derived from MeSH annotations, can be accessed using PubChem's web interfaces, enabling users to explore information available in literature related to PubChem records beyond typical web search results. Graphical abstractLiterature information for PubChem records is derived from various sources.

Update on Medical Practices that should be questioned in 2015

PubMed Central

Morgan, Daniel J.; Dhruva, Sanket S.; Wright, Scott M.; Korenstein, Deborah

2016-01-01

Importance Overuse of medical care, consisting primarily of overdiagnosis and overtreatment, is a common clinical problem. Objective To identify and highlight articles published in 2014 that are most likely to impact overuse, organized into the categories of overdiagnosis, overtreatment, and methods to avoid overuse. These manuscripts were reviewed and interpreted for their importance to clinical medicine. Evidence Review A structured review of English-language articles on PubMed published in 2014 and review of tables of contents of relevant journals to identify potential articles that related to medical overuse in adults. Findings We reviewed 910 articles, of which 440 addressed overuse. Of these, 104 were deemed most relevant based on the presentation of original data, quality of methodology, magnitude of clinical impact, and the number of patients potentially affected. The 10 most influential articles were selected by author consensus using the same criteria. Findings included lack of benefit for screening pelvic examinations (positive predictive value <5%), carotid artery and thyroid ultrasounds. Harms of cancer screening included unnecessary surgery and complications. Head CT scans were an overused diagnostic test (4% with clinically significant findings) and overtreatment included acetaminophen for low back pain, prolonged opioid use after surgery (3% of patients on >90 days), perioperative aspirin, medications to increase HDL, and stenting for renal artery stenosis. Conclusions and Relevance Many common medical practices should be reconsidered. It is hoped that our review promotes reflection on these 10 articles and lead to questioning other non-evidence based practices. PMID:26551354

An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Article's Absorption During Reverberant Chamber Acoustic Testing of Spaceflight Hardware

NASA Technical Reports Server (NTRS)

Hozman, Aron D.; Hughes, William O.

2014-01-01

The exposure of a customer's aerospace test-article to a simulated acoustic launch environment is typically performed in a reverberant acoustic test chamber. The acoustic pre-test runs that will ensure that the sound pressure levels of this environment can indeed be met by a test facility are normally performed without a test-article dynamic simulator of representative acoustic absorption and size. If an acoustic test facility's available acoustic power capability becomes maximized with the test-article installed during the actual test then the customer's environment requirement may become compromised. In order to understand the risk of not achieving the customer's in-tolerance spectrum requirement with the test-article installed, an acoustic power margin evaluation as a function of frequency may be performed by the test facility. The method for this evaluation of acoustic power will be discussed in this paper. This method was recently applied at the NASA Glenn Research Center Plum Brook Station's Reverberant Acoustic Test Facility for the SpaceX Falcon 9 Payload Fairing acoustic test program.

An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Article's Absorption during Reverberant Chamber Acoustic Testing of Spaceflight Hardware

NASA Technical Reports Server (NTRS)

Hozman, Aron D.; Hughes, William O.

2014-01-01

The exposure of a customers aerospace test-article to a simulated acoustic launch environment is typically performed in a reverberant acoustic test chamber. The acoustic pre-test runs that will ensure that the sound pressure levels of this environment can indeed be met by a test facility are normally performed without a test-article dynamic simulator of representative acoustic absorption and size. If an acoustic test facilitys available acoustic power capability becomes maximized with the test-article installed during the actual test then the customers environment requirement may become compromised. In order to understand the risk of not achieving the customers in-tolerance spectrum requirement with the test-article installed, an acoustic power margin evaluation as a function of frequency may be performed by the test facility. The method for this evaluation of acoustic power will be discussed in this paper. This method was recently applied at the NASA Glenn Research Center Plum Brook Stations Reverberant Acoustic Test Facility for the SpaceX Falcon 9 Payload Fairing acoustic test program.

Application of Ultrasonic Phased Array Technology to the Detection of Defect in Composite Stiffened-structures

NASA Astrophysics Data System (ADS)

Zhou, Yuan-Qi; Zhan, Li-Hua

2016-05-01

Composite stiffened-structure consists of the skin and stringer has been widely used in aircraft fuselage and wings. The main purpose of the article is to detect the composite material reinforced structure accurately and explore the relationship between defect formation and structural elements or curing process. Based on ultrasonic phased array inspection technology, the regularity of defects in the manufacture of composite materials are obtained, the correlation model between actual defects and nondestructive testing are established. The article find that the forming quality of deltoid area in T-stiffened structure is obviously improved by pre-curing, the defects of hat-stiffened structure are affected by the mandrel. The results show that the ultrasonic phased array inspection technology can be an effectively way for the detection of composite stiffened-structures, which become an important means to control the defects of composite and improve the quality of the product.

A review of modern instrumental techniques for measurements of ice cream characteristics.

PubMed

Bahram-Parvar, Maryam

2015-12-01

There is an increasing demand of the food industries and research institutes to have means of measurement allowing the characterization of foods. Ice cream, as a complex food system, consists of a frozen matrix containing air bubbles, fat globules, ice crystals, and an unfrozen serum phase. Some deficiencies in conventional methods for testing this product encourage the use of alternative techniques such as rheometry, spectroscopy, X-ray, electro-analytical techniques, ultrasound, and laser. Despite the development of novel instrumental applications in food science, use of some of them in ice cream testing is few, but has shown promising results. Developing the novel methods should increase our understanding of characteristics of ice cream and may allow online testing of the product. This review article discusses the potential of destructive and non-destructive methodologies in determining the quality and characteristics of ice cream and similar products. Copyright © 2015. Published by Elsevier Ltd.

Instrument Development of Integrative Health and Wellness Assessment™.

PubMed

McElligott, Deborah; Eckardt, Sarah; Montgomery Dossey, Barbara; Luck, Susan; Eckardt, Patricia

2017-12-01

The nurse coach role was developed to address the needs of our nation and the world for health and wellbeing. The Theory of Integrative Nurse Coaching provides a foundation for coaching interventions supporting health promotion, and a framework for the development of the Integrative Health and Wellness Assessment (IHWA) short form. This 36-question Likert-type scale self-reporting tool assists participants in assessing healthy behaviors through a self-reflection process, provides information for the coaching relationship, and may be an outcome measurement. This article describes the history of the IHWA tool and the development and pilot testing of the IHWA short form using guidelines provided by DeVellis. Results of the Kaiser-Meyer-Olkin test yielded a value of .520, and the Bartlett's test of sphericity was significant. Cronbach's alpha overall scale internal consistency was .88 ( n = 36). Pilot study results indicate that the scale could be improved through additional revision, and an ongoing study is in progress.

When instructions fail. The effects of stimulus control training on brain injury survivors' attending and reporting during hearing screenings.

PubMed

Schlund, M W

2000-10-01

Bedside hearing screenings are routinely conducted by speech and language pathologists for brain injury survivors during rehabilitation. Cognitive deficits resulting from brain injury, however, may interfere with obtaining estimates of auditory thresholds. Poor comprehension or attention deficits often compromise patient abilities to follow procedural instructions. This article describes the effects of jointly applying behavioral methods and psychophysical methods to improve two severely brain-injured survivors' attending and reporting on auditory test stimuli presentation. Treatment consisted of stimulus control training that involved differentially reinforcing responding in the presence and absence of an auditory test tone. Subsequent hearing screenings were conducted with novel auditory test tones and a common titration procedure. Results showed that prior stimulus control training improved attending and reporting such that hearing screenings were conducted and estimates of auditory thresholds were obtained.

The behavioral regulation in sport questionnaire (BRSQ): instrument development and initial validity evidence.

PubMed

Lonsdale, Chris; Hodge, Ken; Rose, Elaine A

2008-06-01

The purpose of the four studies described in this article was to develop and test a new measure of competitive sport participants' intrinsic motivation, extrinsic motivation, and amotivation (self-determination theory; Deci & Ryan, 1985). The items for the new measure, named the Behavioral Regulation in Sport Questionnaire (BRSQ), were constructed using interviews, expert review, and pilot testing. Analyses supported the internal consistency, test-retest reliability, and factorial validity of the BRSQ scores. Nomological validity evidence was also supportive, as BRSQ subscale scores were correlated in the expected pattern with scores derived from measures of motivational consequences. When directly compared with scores derived from the Sport Motivation Scale (SMS; Pelletier, Fortier, Vallerand, Tuson, & Blais, 1995) and a revised version of that questionnaire (SMS-6; Mallett, Kawabata, Newcombe, Otero-Forero, & Jackson, 2007), BRSQ scores demonstrated equal or superior reliability and factorial validity as well as better nomological validity.

Does the Defining Issues Test measure ethical judgment ability or political position?

PubMed

Bailey, Charles D

2011-01-01

This article addresses the construct validity of the Defining Issues Test of ethical judgment (DIT/DIT-2). Alleging a political bias in the test, Emler and colleagues (1983, 1998, 1999, 2007), show that conservatives score higher when asked to fake as liberals, implying that they understand the reasoning associated with "higher" moral development but avoid items they see as liberally biased. DIT proponents challenge the internal validity of faking studies, advocating an explained-variance validation. This study takes a new approach: Adult participants complete the DIT-2, then evaluate the raw responses of others to discern political orientation and ethical development. Results show that individuals scoring higher on the DIT-2 rank others' ethical judgment in a way consistent with DIT-2-based rankings. Accuracy at assessing political orientation, however, is low. Results support the DIT-2's validity as a measure of ethical development, not an expression of political position.

Evaluating the implementation and impacts of middle grades inquiry-based engineering design modules

NASA Astrophysics Data System (ADS)

Harlan, Jessica M.

This dissertation uses a format where I present and discuss three articles that were written in conjunction with my work on a research and evaluation team. The articles are based on a multi-year project researching and evaluating the design, development, and implementation of a middle grades integrated Science, Technology, Engineering, and Mathematics (STEM) program. Each of the articles demonstrates the complexity in researching and evaluating curricular development in multifaceted, rapidly changing environments. While the focus of each article differs, they all examine research and evaluation in the context of the design and development of middle grades engineering-design modules. The selected articles address challenges associated with assessing program objectives and evaluating program quality in complex education programs.The first article, presented in Chapter 2, provides an overview of the nature of the EYE program and examines the extent to which participation in the EYE program resulted in the achievement of program objectives. There is evidence that EYE Module participation has a positive impact on participating students as well as teachers. This study also revealed challenges associated with determining the impact of program participation simultaneously with program revisions and assessment development. The second article, presented in Chapter 3, examined the evaluation of fidelity of implementation of inquiry-oriented educational programs. This article was intended to examine one way of triangulating information to determine fidelity while considering variation in implementation consistent with program theories of learning. When applying this model to implementation of the EYE program, we found many teachers were implementing the modules with low to moderate fidelity, especially math teachers. The third article, presented in Chapter 4, examined the factor structure of an occupational values scale intended to measure student interest in STEM careers. When reviewing the assessment's evidence base, we found no published literature regarding the assessment's psychometric properties. We found that the AWE Work Values scale assesses two separate sets of occupational values: 1) using analytical and problem solving skills and 2) personal satisfaction. In Chapter 5, I discuss the implications of the research presented in these articles to the field of integrated STEM. This includes a need to further develop and test tools and methods for measuring program impact. While the articles address several issues related to research and evaluation within the context of K-12 integrated STEM education, the concepts and implications also apply to the general field of instructional design. The primary lesson is the need to systematically evaluate designed instruction, including measuring fidelity of implementation and designing evaluations in advance to ensure appropriate data are gathered. Recommendations for future research include identification of common outcomes for integrated STEM, psychometric testing of integrated STEM attitude measures, impacts of other factors such as interest in STEM, and development and testing of instructional design models for integrated STEM.

Using Teacher-Developed Corpora in the CBI Classroom

ERIC Educational Resources Information Center

Salsbury, Tom; Crummer, Crista

2008-01-01

This article argues for the use of teacher-generated corpora in content-based courses. Using a content course for engineering and architecture students as an example, the article explains how a corpus consisting of texts from textbooks and journal articles helped students learn grammar, vocabulary, and writing. The article explains how the corpus…

Too much ado about instrumental variable approach: is the cure worse than the disease?

PubMed

Baser, Onur

2009-01-01

To review the efficacy of instrumental variable (IV) models in addressing a variety of assumption violations to ensure standard ordinary least squares (OLS) estimates are consistent. IV models gained popularity in outcomes research because of their ability to consistently estimate the average causal effects even in the presence of unmeasured confounding. However, in order for this consistent estimation to be achieved, several conditions must hold. In this article, we provide an overview of the IV approach, examine possible tests to check the prerequisite conditions, and illustrate how weak instruments may produce inconsistent and inefficient results. We use two IVs and apply Shea's partial R-square method, the Anderson canonical correlation, and Cragg-Donald tests to check for weak instruments. Hall-Peixe tests are applied to see if any of these instruments are redundant in the analysis. A total of 14,952 asthma patients from the MarketScan Commercial Claims and Encounters Database were examined in this study. Patient health care was provided under a variety of fee-for-service, fully capitated, and partially capitated health plans, including preferred provider organizations, point of service plans, indemnity plans, and health maintenance organizations. We used controller-reliever copay ratio and physician practice/prescribing patterns as an instrument. We demonstrated that the former was a weak and redundant instrument producing inconsistent and inefficient estimates of the effect of treatment. The results were worse than the results from standard regression analysis. Despite the obvious benefit of IV models, the method should not be used blindly. Several strong conditions are required for these models to work, and each of them should be tested. Otherwise, bias and precision of the results will be statistically worse than the results achieved by simply using standard OLS.

Test anxiety in mathematics among early undergraduate students in a British university in Malaysia

NASA Astrophysics Data System (ADS)

Karjanto, Natanael; Yong, Su Ting

2013-03-01

The level of test anxiety in mathematics subjects among early undergraduate students at the University of Nottingham Malaysia Campus is studied in this article. The sample consists of 206 students taking several mathematics modules who completed the questionnaires on test anxiety just before they entered the venue for midterm examinations. The sample data include the differences in the context of academic levels, gender groups and nationality backgrounds. The level of test anxiety in mathematics is measured using seven Likert questionnaire statements adapted from the Test Anxiety Inventory describing one's emotional feeling before the start of an examination. In general, the result shows that the students who had a lower score expectation were more anxious than those who had a higher score expectation, but that they obtained a better score than the expected score. In the context of academic levels, gender groups and nationality backgrounds, there were no significant correlations between the level of test anxiety and the students' academic performance. The effect size of the correlation values ranged from extremely small to moderate.

Elemental Water Impact Test: Phase 3 Plunge Depth of a 36-Inch Aluminum Tank Head

NASA Technical Reports Server (NTRS)

Vassilakos, Gregory J.

2014-01-01

Spacecraft are being designed based on LS-DYNA water landing simulations. The Elemental Water Impact Test (EWIT) series was undertaken to assess the accuracy of LS-DYNA water impact simulations. Phase 3 featured a composite tank head that was tested at a range of heights to verify the ability to predict structural failure of composites. To support planning for Phase 3, a test series was conducted with an aluminum tank head dropped from heights of 2, 6, 10, and 12 feet to verify that the test article would not impact the bottom of the test pool. This report focuses on the comparisons of the measured plunge depths to LS-DYNA predictions. The results for the tank head model demonstrated the following. 1. LS-DYNA provides accurate predictions for peak accelerations. 2. LS-DYNA consistently under-predicts plunge depth. An allowance of at least 20% should be added to the LS-DYNA predictions. 3. The LS-DYNA predictions for plunge depth are relatively insensitive to the fluid-structure coupling stiffness.

Validation of an instrument to assess evidence-based practice knowledge, attitudes, access, and confidence in the dental environment.

PubMed

Hendricson, William D; Rugh, John D; Hatch, John P; Stark, Debra L; Deahl, Thomas; Wallmann, Elizabeth R

2011-02-01

This article reports the validation of an assessment instrument designed to measure the outcomes of training in evidence-based practice (EBP) in the context of dentistry. Four EBP dimensions are measured by this instrument: 1) understanding of EBP concepts, 2) attitudes about EBP, 3) evidence-accessing methods, and 4) confidence in critical appraisal. The instrument-the Knowledge, Attitudes, Access, and Confidence Evaluation (KACE)-has four scales, with a total of thirty-five items: EBP knowledge (ten items), EBP attitudes (ten), accessing evidence (nine), and confidence (six). Four elements of validity were assessed: consistency of items within the KACE scales (extent to which items within a scale measure the same dimension), discrimination (capacity to detect differences between individuals with different training or experience), responsiveness (capacity to detect the effects of education on trainees), and test-retest reliability. Internal consistency of scales was assessed by analyzing responses of second-year dental students, dental residents, and dental faculty members using Cronbach coefficient alpha, a statistical measure of reliability. Discriminative validity was assessed by comparing KACE scores for the three groups. Responsiveness was assessed by comparing pre- and post-training responses for dental students and residents. To measure test-retest reliability, the full KACE was completed twice by a class of freshman dental students seventeen days apart, and the knowledge scale was completed twice by sixteen faculty members fourteen days apart. Item-to-scale consistency ranged from 0.21 to 0.78 for knowledge, 0.57 to 0.83 for attitude, 0.70 to 0.84 for accessing evidence, and 0.87 to 0.94 for confidence. For discrimination, ANOVA and post hoc testing by the Tukey-Kramer method revealed significant score differences among students, residents, and faculty members consistent with education and experience levels. For responsiveness to training, dental students and residents demonstrated statistically significant changes, in desired directions, from pre- to post-test. For the student test-retest, Pearson correlations for KACE scales were as follows: knowledge 0.66, attitudes 0.66, accessing evidence 0.74, and confidence 0.76. For the knowledge scale test-retest by faculty members, the Pearson correlation was 0.79. The construct validity of the KACE is equivalent to that of instruments that assess similar EBP dimensions in medicine. Item consistency for the knowledge scale was more variable than for other KACE scales, a finding also reported for medically oriented EBP instruments. We conclude that the KACE has good discriminative validity, responsiveness to training effects, and test-retest reliability.

Neuropsychological Measures in the Diagnosis of ADHD in Preschool: Can Developmental Research Inform Diagnostic Practice?

PubMed

Merkt, Julia; Siniatchkin, Michael; Petermann, Franz

2016-03-22

The diagnosis of ADHD in preschool is challenging. Behavioral ratings are less reliable, but the value of neuropsychological tests in the diagnosis of ADHD has been debated. This article provides an overview of neuropsychological measures utilized in preschoolers with ADHD (3-5 years). In addition, the manuscript discusses the extent to which these measures have been tested for their diagnostic capacity. The diagnostic utility of computerized continuous performance tests and working memory subtests from IQ-batteries has been demonstrated in a number of studies by assessing their psychometric properties, sensitivity, and specificity. However, findings from developmental and basic research attempting to describe risk factors that explain variance in ADHD show the most consistent associations of ADHD with measures of delay aversion. Results from developmental research could benefit studies that improve ADHD diagnosis at the individual level. It might be helpful to consider testing as a structured situation for behavioral observation by the clinician. © The Author(s) 2016.

Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 406

NASA Technical Reports Server (NTRS)

1999-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

A Multi-Scale Method for Dynamics Simulation in Continuum Solvent Models I: Finite-Difference Algorithm for Navier-Stokes Equation.

PubMed

Xiao, Li; Cai, Qin; Li, Zhilin; Zhao, Hongkai; Luo, Ray

2014-11-25

A multi-scale framework is proposed for more realistic molecular dynamics simulations in continuum solvent models by coupling a molecular mechanics treatment of solute with a fluid mechanics treatment of solvent. This article reports our initial efforts to formulate the physical concepts necessary for coupling the two mechanics and develop a 3D numerical algorithm to simulate the solvent fluid via the Navier-Stokes equation. The numerical algorithm was validated with multiple test cases. The validation shows that the algorithm is effective and stable, with observed accuracy consistent with our design.

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 413

NASA Technical Reports Server (NTRS)

2000-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 419

NASA Technical Reports Server (NTRS)

2000-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 404

NASA Technical Reports Server (NTRS)

1999-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 420

NASA Technical Reports Server (NTRS)

2000-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 418

NASA Technical Reports Server (NTRS)

2000-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-2000-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

Aeronautical Engineering: A Continuing Bibliography with Indexes. Supplement 396

NASA Technical Reports Server (NTRS)

1999-01-01

This supplemental issue of Aeronautical Engineering, A Continuing Bibliography with Indexes (NASA/SP-1999-7037) lists reports, articles, and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. Two indexes-subject and author are included after the abstract section.

Goodness-of-Fit Tests and Nonparametric Adaptive Estimation for Spike Train Analysis

PubMed Central

2014-01-01

When dealing with classical spike train analysis, the practitioner often performs goodness-of-fit tests to test whether the observed process is a Poisson process, for instance, or if it obeys another type of probabilistic model (Yana et al. in Biophys. J. 46(3):323–330, 1984; Brown et al. in Neural Comput. 14(2):325–346, 2002; Pouzat and Chaffiol in Technical report, http://arxiv.org/abs/arXiv:0909.2785, 2009). In doing so, there is a fundamental plug-in step, where the parameters of the supposed underlying model are estimated. The aim of this article is to show that plug-in has sometimes very undesirable effects. We propose a new method based on subsampling to deal with those plug-in issues in the case of the Kolmogorov–Smirnov test of uniformity. The method relies on the plug-in of good estimates of the underlying model that have to be consistent with a controlled rate of convergence. Some nonparametric estimates satisfying those constraints in the Poisson or in the Hawkes framework are highlighted. Moreover, they share adaptive properties that are useful from a practical point of view. We show the performance of those methods on simulated data. We also provide a complete analysis with these tools on single unit activity recorded on a monkey during a sensory-motor task. Electronic Supplementary Material The online version of this article (doi:10.1186/2190-8567-4-3) contains supplementary material. PMID:24742008

Calibration of the Verification Engineering Test Article-I (VETA-I) for AXAF using the VETA-I X-ray Detection System

NASA Technical Reports Server (NTRS)

Kellogg, E.; Brissenden, R.; Flanagan, K.; Freeman, M.; Hughes, J.; Jones, M.; Ljungberg, M.; Mckinnon, P.; Podgorski, W.; Schwartz, D.

1992-01-01

Advanced X-ray Astrophysics Facility (AXAF) X-ray optics testing is conducted by VETA-I, which consists of six nested Wolter type I grazing-incidence mirrors; VETA's X-ray Detection System (VXDS) in turn measures the imaging properties of VETA-I, yielding FWHM and encircled energy of the X-ray image obtained, as well as its effective area. VXDS contains a high resolution microchannel plate imaging X-ray detector and a pinhole scanning system in front of proportional-counter detectors. VETA-I's X-ray optics departs from the AXAF flight configuration in that it uses a temporary holding fixture; its mirror elements are not cut to final length, and are not coated with the metal film used to maximize high-energy reflection.

[Determination of cost-effective strategies in colorectal cancer screening].

PubMed

Dervaux, B; Eeckhoudt, L; Lebrun, T; Sailly, J C

1992-01-01

The object of the article is to implement particular methodologies in order to determine which strategies are cost-effective in the mass screening of colorectal cancer after a positive Hemoccult test. The first approach to be presented consists in proposing a method which enables all the admissible diagnostic strategies to be determined. The second approach enables a minimal cost function to be estimated using an adaptation of "Data Envelopment Analysis". This method proves to be particularly successful in cost-efficiency analysis, when the performance indicators are numerous and hard to aggregate. The results show that there are two cost-effective strategies after a positive Hemoccult test: coloscopy and sigmoidoscopy; they put into question the relevance of double contrast barium enema in the diagnosis of colo-rectal lesions.

The self-healing composite anticorrosion coating

NASA Astrophysics Data System (ADS)

Yang, Zhao; Wei, Zhang; Le-ping, Liao; Hong-mei, Wang; Wu-jun, Li

Self-healing coatings, which autonomically repair and prevent corrosion of the underlying substrate, are of particular interest for the researchers. In the article, effectiveness of epoxy resin filled microcapsules was investigated for healing of cracks generated in coatings. Microcapsules were prepared by in situ polymerization of urea-formaldehyde resin to form shell over epoxy resindroplets. Characteristics of these capsules were studied by scanning electron microscope (SEM), thermo gravimetric analyzer (TGA) and particle size analyzer. The model system of self-healing antisepsis coating consists of an epoxy resin matrix, 10 wt% microencapsulated healing agent, 2wt% catalyst solution. The self-healing function of this coating system is evaluated through corrosion testing of damaged and healed coated steel samples compared to control samples. Electrochemical testing provides further evidence of passivation of the substrate by self-healing coatings.

Enhancing Higher Order Thinking Skills Among Inservice Science Teachers Via Embedded Assessment

NASA Astrophysics Data System (ADS)

Barak, Miri; Dori, Yehudit Judy

2009-10-01

Testing students on higher order thinking skills may reinforce these skills among them. To research this assertion, we developed a graduate course for inservice science teachers in a framework of a “Journal Club”—a hybrid course which combines face-to-face classroom discussions with online activities, interrelating teaching, learning, and assessment. The course involves graduate students in critical evaluation of science education articles and cognitive debates, and tests them on these skills. Our study examined the learning processes and outcomes of 51 graduate students, from three consecutive semesters. Findings indicated that the students’ higher order thinking skills were enhanced in terms of their ability to (a) pose complex questions, (b) present solid opinions, (c) introduce consistent arguments, and (d) demonstrate critical thinking.

Using Multivariate Base Rates to Interpret Low Scores on an Abbreviated Battery of the Delis-Kaplan Executive Function System.

PubMed

Karr, Justin E; Garcia-Barrera, Mauricio A; Holdnack, James A; Iverson, Grant L

2017-05-01

Executive function consists of multiple cognitive processes that operate as an interactive system to produce volitional goal-oriented behavior, governed in large part by frontal microstructural and physiological networks. Identification of deficits in executive function in those with neurological or psychiatric conditions can be difficult because the normal variation in executive function test scores, in healthy adults when multiple tests are used, is largely unknown. This study addresses that gap in the literature by examining the prevalence of low scores on a brief battery of executive function tests. The sample consisted of 1,050 healthy individuals (ages 16-89) from the standardization sample for the Delis-Kaplan Executive Function System (D-KEFS). Seven individual test scores from the Trail Making Test, Color-Word Interference Test, and Verbal Fluency Test were analyzed. Low test scores, as defined by commonly used clinical cut-offs (i.e., ≤25th, 16th, 9th, 5th, and 2nd percentiles), occurred commonly among the adult portion of the D-KEFS normative sample (e.g., 62.8% of the sample had one or more scores ≤16th percentile, 36.1% had one or more scores ≤5th percentile), and the prevalence of low scores increased with lower intelligence and fewer years of education. The multivariate base rates (BR) in this article allow clinicians to understand the normal frequency of low scores in the general population. By use of these BRs, clinicians and researchers can improve the accuracy with which they identify executive dysfunction in clinical groups, such as those with traumatic brain injury or neurodegenerative diseases. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Renal pathophysiologic role of cortical tubular inclusion bodies.

PubMed

Radi, Zaher A; Stewart, Zachary S; Grzemski, Felicity A; Bobrowski, Walter F

2013-01-01

Renal tubular inclusion bodies are rarely associated with drug administration. The authors describe the finding of renal cortical tubular intranuclear and intracytoplasmic inclusion bodies associated with the oral administration of a norepinephrine/serotonin reuptake inhibitor (NSRI) test article in Sprague-Dawley (SD) rats. Rats were given an NSRI daily for 4 weeks, and kidney histopathologic, ultrastructural pathology, and immunohistochemical examinations were performed. Round eosinophilic intranuclear inclusion bodies were observed histologically in the tubular epithelial cells of the renal cortex in male and female SD rats given the NSRI compound. No evidence of degeneration or necrosis was noted in the inclusion-containing renal cells. By ultrastructural pathology, inclusion bodies consisted of finely granular, amorphous, and uniformly stained nonmembrane-bound material. By immunohistochemistry, inclusion bodies stained positive for d-amino acid oxidase (DAO) protein. In addition, similar inclusion bodies were noted in the cytoplasmic tubular epithelial compartment by ultrastructural and immunohistochemical examination.  This is the first description of these renal inclusion bodies after an NSRI test article administration in SD rats. Such drug-induced renal inclusion bodies are rat-specific, do not represent an expression of nephrotoxicity, represent altered metabolism of d-amino acids, and are not relevant to human safety risk assessment.

Creation of a computer self-efficacy measure: analysis of internal consistency, psychometric properties, and validity.

PubMed

Howard, Matt C

2014-10-01

Computer self-efficacy is an often studied construct that has been shown to be related to an array of important individual outcomes. Unfortunately, existing measures of computer self-efficacy suffer from several deficiencies, including criterion contamination, outdated wording, and/or inadequate psychometric properties. For this reason, the current article presents the creation of a new computer self-efficacy measure. In Study 1, an over-representative item list is created and subsequently reduced through exploratory factor analysis to create an initial measure, and the discriminant validity of this initial measure is tested. In Study 2, the unidimensional factor structure of the initial measure is supported through confirmatory factor analysis and further reduced into a final, 12-item measure. In Study 3, the convergent and criterion validity of the 12-item measure is tested. Overall, this three study process demonstrates that the new computer self-efficacy measure has superb psychometric properties and internal reliability, and demonstrates excellent evidence for several aspects of validity. It is hoped that the 12-item computer self-efficacy measure will be utilized in future research on computer self-efficacy, which is discussed in the current article.

Design of 8-ft-Diameter Barrel Test Article Attachment Rings for Shell Buckling Knockdown Factor Project

NASA Technical Reports Server (NTRS)

Lovejoy, Andrew E.; Hilburger, Mark W.

2010-01-01

The Shell Buckling Knockdown Factor (SBKF) project includes the testing of sub-scale cylinders to validate new shell buckling knockdown factors for use in the design of the Ares-I and Ares-V launch vehicles. Test article cylinders represent various barrel segments of the Ares-I and Ares-V vehicles, and also include checkout test articles. Testing will be conducted at Marshall Space Flight Center (MSFC) for test articles having an eight-foot diameter outer mold line (OML) and having lengths that range from three to ten feet long. Both ends of the test articles will be connected to the test apparatus using attachment rings. Three multiple-piece and one single-piece design for the attachment rings were developed and analyzed. The single-piece design was chosen and will be fabricated from either steel or aluminum (Al) depending on the required safety factors (SF) for test hardware. This report summarizes the design and analysis of these attachment ring concepts.

An Evaluation of the Additional Acoustic Power Needed to Overcome the Effects of a Test-Articles Absorption During Reverberant Chamber Acoustic Testing of Spaceflight Hardware

NASA Technical Reports Server (NTRS)

Hozman, Aron D.; Hughes, William O.

2014-01-01

It is important to realize that some test-articles may have significant sound absorption that may challenge the acoustic power capabilities of a test facility. Therefore, to mitigate this risk of not being able to meet the customers target spectrum, it is prudent to demonstrate early-on an increased acoustic power capability which compensates for this test-article absorption. This paper describes a concise method to reduce this risk when testing aerospace test-articles which have significant absorption. This method was successfully applied during the SpaceX Falcon 9 Payload Fairing acoustic test program at the NASA Glenn Research Center Plum Brook Stations RATF.

Satellite Power Systems (SPS). LSST systems and integration task for SPS flight test article

NASA Technical Reports Server (NTRS)

Greenberg, H. S.

1981-01-01

This research activity emphasizes the systems definition and resulting structural requirements for the primary structure of two potential SPS large space structure test articles. These test articles represent potential steps in the SPS research and technology development.

NASA Ares I Launch Vehicle First Stage Roll Control System Cold Flow Development Test Program Overview

NASA Technical Reports Server (NTRS)

Butt, Adam; Popp, Christopher G.; Holt, Kimberly A.; Pitts, Hank M.

2010-01-01

The Ares I launch vehicle is the selected design, chosen to return humans to the moon, Mars, and beyond. It is configured in two inline stages: the First Stage is a Space Shuttle derived five-segment Solid Rocket Booster and the Upper Stage is powered by a Saturn V derived J-2X engine. During launch, roll control for the First Stage (FS) is handled by a dedicated Roll Control System (RoCS) located on the connecting Interstage. That system will provide the Ares I with the ability to counteract induced roll torque while any induced yaw or pitch moments are handled by vectoring of the booster nozzle. This paper provides an overview of NASA s Ares I FS RoCS cold flow development test program including detailed test objectives, types of tests run to meet those objectives, an overview of the results, and applicable lessons learned. The test article was built and tested at the NASA Marshall Space Flight Center in Huntsville, AL. The FS RoCS System Development Test Article (SDTA) is a full scale, flight representative water flow test article whose primary objective was to obtain fluid system performance data to evaluate integrated system level performance characteristics and verify analytical models. Development testing and model correlation was deemed necessary as there is little historical precedent for similar large flow, pulsing systems such as the FS RoCS. The cold flow development test program consisted of flight-similar tanks, pressure regulators, and thruster valves, as well as plumbing simulating flight geometries, combined with other facility grade components and structure. Orifices downstream of the thruster valves were used to simulate the pressure drop through the thrusters. Additional primary objectives of this test program were to: evaluate system surge pressure (waterhammer) characteristics due to thruster valve operation over a range of mission duty cycles at various feed system pressures, evaluate temperature transients and heat transfer in the pressurization system, including regulator blowdown and propellant ullage performance, measure system pressure drops for comparison to analysis of tubing and components, and validate system activation and re-activation procedures for the helium pressurant system. Secondary objectives included: validating system processes for loading, unloading, and purging, validating procedures and system response for multiple failure scenarios, including relief valve operation, and evaluating system performance for contingency scenarios. The test results of the cold flow development test program are essential in validating the performance and interaction of the Roll Control System and anchoring analysis tools and results to a Critical Design Review level of fidelity.

Low Levels of Evidence on the Plastic Surgery In-Service Training Exam.

PubMed

Silvestre, Jason; Bilici, Nadir; Serletti, Joseph M; Chang, Benjamin

2016-06-01

The Plastic Surgery In-Service Training Exam is written by the American Society of Plastic Surgeons. Examinees reasonably infer that tested material reflects the Society's vision for the core curriculum in plastic surgery. The purpose of this study was to determine the levels of evidence on which credited answers to the examination questions are based. Two recent Plastic Surgery In-Service Training Exams (2014 and 2015) were analyzed. Questions were categorized using a taxonomy model. Recommended journal article references for Level III (decision-making) questions were assigned a level of evidence. Exam sections were analyzed for differences in question taxonomy distribution and level of evidence. To look for studies with higher levels of evidence, a PubMed search was conducted for a random sample of 10 questions from each section. One hundred three Level I (25.8 percent), 138 Level II (34.5 percent), and 159 Level III (39.8 percent) questions were analyzed (p < 0.001). The hand and lower extremity section had the highest percentage of Level III questions (50.0 percent; p = 0.005). Journal articles had a mean level of evidence of 3.9 ± 0.7. The number of articles with a low level of evidence (IV and V) (p = 0.624) and the percentage of questions supported by articles with a high level of evidence (I and II) (p = 0.406) did not vary by section. The PubMed search revealed no instances of a higher level of evidence than the recommended reading list. A significant percentage of Plastic Surgery In-Service Training Exam questions test clinical management, but most are supported with a low level of evidence. Although that is consistent with low level of evidence of plastic surgery literature, educators should recognize the potential for biases of question writers.

Biomechanical tolerance of whole lumbar spines in straightened posture subjected to axial acceleration.

PubMed

Stemper, Brian D; Chirvi, Sajal; Doan, Ninh; Baisden, Jamie L; Maiman, Dennis J; Curry, William H; Yoganandan, Narayan; Pintar, Frank A; Paskoff, Glenn; Shender, Barry S

2018-06-01

Quantification of biomechanical tolerance is necessary for injury prediction and protection of vehicular occupants. This study experimentally quantified lumbar spine axial tolerance during accelerative environments simulating a variety of military and civilian scenarios. Intact human lumbar spines (T12-L5) were dynamically loaded using a custom-built drop tower. Twenty-three specimens were tested at sub-failure and failure levels consisting of peak axial forces between 2.6 and 7.9 kN and corresponding peak accelerations between 7 and 57 g. Military aircraft ejection and helicopter crashes fall within these high axial acceleration ranges. Testing was stopped following injury detection. Both peak force and acceleration were significant (p < 0.0001) injury predictors. Injury probability curves using parametric survival analysis were created for peak acceleration and peak force. Fifty-percent probability of injury (95%CI) for force and acceleration were 4.5 (3.9-5.2 kN), and 16 (13-19 g). A majority of injuries affected the L1 spinal level. Peak axial forces and accelerations were greater for specimens that sustained multiple injuries or injuries at L2-L5 spinal levels. In general, force-based tolerance was consistent with previous shorter-segment lumbar spine testing (3-5 vertebrae), although studies incorporating isolated vertebral bodies reported higher tolerance attributable to a different injury mechanism involving structural failure of the cortical shell. This study identified novel outcomes with regard to injury patterns, wherein more violent exposures produced more injuries in the caudal lumbar spine. This caudal migration was likely attributable to increased injury tolerance at lower lumbar spinal levels and a faster inertial mass recruitment process for high rate load application. Published 2017. This article is a U.S. Government work and is in the public domain in the USA. J Orthop Res 36:1747-1756, 2018. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

Simulating the Impact Response of Composite Airframe Components

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Littell, Justin D.; Fasanella, Edwin L.

2014-01-01

In 2010, NASA Langley Research Center obtained residual hardware from the US Army's Survivable Affordable Repairable Airframe Program (SARAP). The hardware consisted of a composite fuselage section that was representative of the center section of a Black Hawk helicopter. The section was fabricated by Sikorsky Aircraft Corporation and designated the Test Validation Article (TVA). The TVA was subjected to a vertical drop test in 2008 to evaluate a tilting roof concept to limit the intrusion of overhead mass items, such as the rotor transmission, into the fuselage cabin. As a result of the 2008 test, damage to the hardware was limited primarily to the roof. Consequently, when the post-test article was obtained in 2010, the roof area was removed and the remaining structure was cut into six different types of test specimens including: (1) tension and compression coupons for material property characterization, (2) I-beam sections, (3) T-sections, (4) cruciform sections, (5) a large subfloor section, and (6) a forward framed fuselage section. In 2011, NASA and Sikorsky entered into a cooperative research agreement to study the impact responses of composite airframe structures and to evaluate the capabilities of the explicit transient dynamic finite element code, LS-DYNA®, to simulate these responses including damage initiation and progressive failure. Finite element models of the composite specimens were developed and impact simulations were performed. The properties of the composite material were represented using both a progressive in-plane damage model (Mat 54) and a continuum damage mechanics model (Mat 58) in LS-DYNA. This paper provides test-analysis comparisons of time history responses and the location and type of damage for representative I-beam, T-section, and cruciform section components.

"Salivary exRNA biomarkers to detect gingivitis and monitor disease regression".

PubMed

Kaczor-Urbanowicz, Karolina Elżbieta; Trivedi, Harsh M; Lima, Patricia O; Camargo, Paulo M; Giannobile, William V; Grogan, Tristan R; Gleber-Netto, Frederico O; Whiteman, Yair; Li, Feng; Lee, Hyo Jung; Dharia, Karan; Aro, Katri; Carerras-Presas, Carmen Martin; Amuthan, Saarah; Vartak, Manjiri; Akin, David; Al-Adbullah, Hiba; Bembey, Kanika; Klokkevold, Perry R; Elashoff, David; Barnes, Virginia Monsul; Richter, Rose; DeVizio, William; Masters, James G; Wong, David

2018-05-19

This study tests the hypothesis that salivary extracellular RNA (exRNA) biomarkers can be developed for gingivitis detection and monitoring disease regression. Salivary exRNA biomarker candidates were developed from a total of 100 gingivitis and non-gingivitis individuals using Affymetrix's expression microarrays. The top ten differentially expressed exRNAs were tested in a clinical cohort to determine if the discovered salivary exRNA markers for gingivitis were associated with clinical gingivitis and disease regression. For this purpose, unstimulated saliva was collected from 30 randomly selected gingivitis subjects, the gingival and plaque indexes scores were taken at baseline, 3 & 6 weeks and salivary exRNAs were assayed by means of reverse transcription quantitative polymerase chain reaction. Eight salivary exRNA biomarkers developed for gingivitis were statistically significantly changed over time, consistent with disease regression. A panel of four salivary exRNAs [SPRR1A, lnc-TET3-2:1, FAM25A, CRCT1] can detect gingivitis with a clinical performance of 0.91 area under the curve (AUC), with 71% sensitivity and 100% specificity. The clinical values of the developed salivary exRNA biomarkers are associated with gingivitis regression. They offer strong potential to be advanced for definitive validation and clinical laboratory development test (LDT). This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Semi-Automatic Indexing of Full Text Biomedical Articles

PubMed Central

Gay, Clifford W.; Kayaalp, Mehmet; Aronson, Alan R.

2005-01-01

The main application of U.S. National Library of Medicine’s Medical Text Indexer (MTI) is to provide indexing recommendations to the Library’s indexing staff. The current input to MTI consists of the titles and abstracts of articles to be indexed. This study reports on an extension of MTI to the full text of articles appearing in online medical journals that are indexed for Medline®. Using a collection of 17 journal issues containing 500 articles, we report on the effectiveness of the contribution of terms by the whole article and also by each section. We obtain the best results using a model consisting of the sections Results, Results and Discussion, and Conclusions together with the article’s title and abstract, the captions of tables and figures, and sections that have no titles. The resulting model provides indexing significantly better (7.4%) than what is currently achieved using only titles and abstracts. PMID:16779044

Model-Based Systems

NASA Technical Reports Server (NTRS)

Frisch, Harold P.

2007-01-01

Engineers, who design systems using text specification documents, focus their work upon the completed system to meet Performance, time and budget goals. Consistency and integrity is difficult to maintain within text documents for a single complex system and more difficult to maintain as several systems are combined into higher-level systems, are maintained over decades, and evolve technically and in performance through updates. This system design approach frequently results in major changes during the system integration and test phase, and in time and budget overruns. Engineers who build system specification documents within a model-based systems environment go a step further and aggregate all of the data. They interrelate all of the data to insure consistency and integrity. After the model is constructed, the various system specification documents are prepared, all from the same database. The consistency and integrity of the model is assured, therefore the consistency and integrity of the various specification documents is insured. This article attempts to define model-based systems relative to such an environment. The intent is to expose the complexity of the enabling problem by outlining what is needed, why it is needed and how needs are being addressed by international standards writing teams.

Image dynamic range test and evaluation of Gaofen-2 dual cameras

NASA Astrophysics Data System (ADS)

Zhang, Zhenhua; Gan, Fuping; Wei, Dandan

2015-12-01

In order to fully understand the dynamic range of Gaofen-2 satellite data and support the data processing, application and next satellites development, in this article, we evaluated the dynamic range by calculating some statistics such as maximum ,minimum, average and stand deviation of four images obtained at the same time by Gaofen-2 dual cameras in Beijing area; then the maximum ,minimum, average and stand deviation of each longitudinal overlap of PMS1,PMS2 were calculated respectively for the evaluation of each camera's dynamic range consistency; and these four statistics of each latitudinal overlap of PMS1,PMS2 were calculated respectively for the evaluation of the dynamic range consistency between PMS1 and PMS2 at last. The results suggest that there is a wide dynamic range of DN value in the image obtained by PMS1 and PMS2 which contains rich information of ground objects; in general, the consistency of dynamic range between the single camera images is in close agreement, but also a little difference, so do the dual cameras. The consistency of dynamic range between the single camera images is better than the dual cameras'.

48 CFR 9.308-2 - Testing performed by the Government.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-2 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... purchase material or to commence production before first article approval, the contracting officer shall...

48 CFR 9.308-2 - Testing performed by the Government.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-2 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... purchase material or to commence production before first article approval, the contracting officer shall...

48 CFR 9.308-2 - Testing performed by the Government.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-2 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... purchase material or to commence production before first article approval, the contracting officer shall...

48 CFR 9.308-2 - Testing performed by the Government.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-2 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... purchase material or to commence production before first article approval, the contracting officer shall...

48 CFR 9.308-2 - Testing performed by the Government.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-2 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... purchase material or to commence production before first article approval, the contracting officer shall...

Exploring the characteristics, global distribution and reasons for retraction of published articles involving human research participants: a literature survey.

PubMed

Li, Guowei; Kamel, Mariam; Jin, Yanling; Xu, Michael Kuan; Mbuagbaw, Lawrence; Samaan, Zainab; Levine, Mitchell Ah; Thabane, Lehana

2018-01-01

Article retraction is a measure taken by journals or authors where there is evidence of research misconduct or error, redundancy, plagiarism or unethical research. Recently, the retraction of scientific publications has been on the rise. In this survey, we aimed to describe the characteristics and distribution of retracted articles and the reasons for retractions. We searched retracted articles on the PubMed database and Retraction Watch website from 1980 to February 2016. The primary outcomes were the characteristics and distribution of retracted articles and the reasons for retractions. The secondary outcomes included how article retractions were handled by journals and how to improve the journal practices toward article retractions. We included 1,339 retracted articles. Most retracted articles had six authors or fewer. Article retraction was most common in the USA (26%), Japan (11%) and Germany (10%). The main reasons for article retraction were misconduct (51%, n = 685) and error (14%, n = 193). There were 66% (n = 889) of retracted articles having male senior or corresponding authors. Of the articles retracted after August 2010, 63% (n = 567) retractions were reported on Retraction Watch. Large discrepancies were observed in the ways that different journals handled article retractions. For instance, articles were completely withdrawn from some journals, while in others, articles were still available with no indication of retraction. Likewise, some retraction notices included a detailed account of the events that led to article retraction, while others only consisted of a statement indicating the article retraction. The characteristics, geographic distribution and reasons for retraction of published articles involving human research participants were examined in this survey. More efforts are needed to improve the consistency and transparency of journal practices toward article retractions.

Exploring the characteristics, global distribution and reasons for retraction of published articles involving human research participants: a literature survey

PubMed Central

Li, Guowei; Kamel, Mariam; Jin, Yanling; Xu, Michael Kuan; Mbuagbaw, Lawrence; Samaan, Zainab; Levine, Mitchell AH; Thabane, Lehana

2018-01-01

Aim Article retraction is a measure taken by journals or authors where there is evidence of research misconduct or error, redundancy, plagiarism or unethical research. Recently, the retraction of scientific publications has been on the rise. In this survey, we aimed to describe the characteristics and distribution of retracted articles and the reasons for retractions. Methods We searched retracted articles on the PubMed database and Retraction Watch website from 1980 to February 2016. The primary outcomes were the characteristics and distribution of retracted articles and the reasons for retractions. The secondary outcomes included how article retractions were handled by journals and how to improve the journal practices toward article retractions. Results We included 1,339 retracted articles. Most retracted articles had six authors or fewer. Article retraction was most common in the USA (26%), Japan (11%) and Germany (10%). The main reasons for article retraction were misconduct (51%, n = 685) and error (14%, n = 193). There were 66% (n = 889) of retracted articles having male senior or corresponding authors. Of the articles retracted after August 2010, 63% (n = 567) retractions were reported on Retraction Watch. Large discrepancies were observed in the ways that different journals handled article retractions. For instance, articles were completely withdrawn from some journals, while in others, articles were still available with no indication of retraction. Likewise, some retraction notices included a detailed account of the events that led to article retraction, while others only consisted of a statement indicating the article retraction. Conclusion The characteristics, geographic distribution and reasons for retraction of published articles involving human research participants were examined in this survey. More efforts are needed to improve the consistency and transparency of journal practices toward article retractions. PMID:29403283

Print news coverage of cancer: what prevention messages are conveyed when screening is newsworthy?

PubMed

Smith, Katherine Clegg; Kromm, Elizabeth Edsall; Klassen, Ann Carroll

2010-08-01

Americans are generally favorable towards cancer screening, but fatalistic about cancer prevention. News coverage shapes perceptions of cancer control in meaningful ways, but there is little consensus as to the impact of news on our understanding of and engagement in cancer screening practices. Our analysis of cancer screening-related print news coverage during a four month period in 2005 suggests that the newsworthiness of new screening technologies may undermine public confidence in currently available and effective secondary prevention programs, while promoting tests whose effectiveness is debated or not yet established. We conducted a structured text analysis of 517 cancer-related news articles from 15 leading daily newspapers and a subsequent qualitative analysis of the 79 screening news articles. Screening articles were analyzed for content related to criteria for screening effectiveness. Content patterns for each type of screening and cancer were also noted. News coverage consistently conveyed screening as important and highlighted the need to protect and expand access to screening. At the same time, to the extent that story content was framed by the newsworthiness of new tests and technologies this often indirectly called into question effective and established protocols and programs without providing any actionable alternative. This analysis revealed unexpected messages about screening that are potentially problematic for cancer control. The cancer control community should continue efforts to understand and shape news coverage of screening in order to promote balanced and action-oriented content. Research has shown that Americans hold conflicting views regarding cancer-having a favorable opinion of screening while simultaneously feeling fatalistic about prevention. Our analysis of print news stories on cancer screening suggests that the determination of screening's "newsworthiness" is related to newly developed tests and protocols, which may create demand for new tests whose effectiveness is unknown and undermine confidence in established and effective screening programs.

Hot-Fire Test Results of Liquid Oxygen/RP-2 Multi-Element Oxidizer-Rich Preburners

NASA Technical Reports Server (NTRS)

Protz, C. S.; Garcia, C. P.; Casiano, M. J.; Parton, J. A.; Hulka, J. R.

2016-01-01

As part of the Combustion Stability Tool Development project funded by the Air Force Space and Missile Systems Center, the NASA Marshall Space Flight Center was contracted to assemble and hot-fire test a multi-element integrated test article demonstrating combustion characteristics of an oxygen/hydrocarbon propellant oxidizer-rich staged-combustion engine thrust chamber. Such a test article simulates flow through the main injectors of oxygen/kerosene oxidizer-rich staged combustion engines such as the Russian RD-180 or NK-33 engines, or future U.S.-built engine systems such as the Aerojet-Rocketdyne AR-1 engine or the Hydrocarbon Boost program demonstration engine. To supply the oxidizer-rich combustion products to the main injector of the integrated test article, existing subscale preburner injectors from a previous NASA-funded oxidizer-rich staged combustion engine development program were utilized. For the integrated test article, existing and newly designed and fabricated inter-connecting hot gas duct hardware were used to supply the oxidizer-rich combustion products to the oxidizer circuit of the main injector of the thrust chamber. However, before one of the preburners was used in the integrated test article, it was first hot-fire tested at length to prove it could provide the hot exhaust gas mean temperature, thermal uniformity and combustion stability necessary to perform in the integrated test article experiment. This paper presents results from hot-fire testing of several preburner injectors in a representative combustion chamber with a sonic throat. Hydraulic, combustion performance, exhaust gas thermal uniformity, and combustion stability data are presented. Results from combustion stability modeling of these test results are described in a companion paper at this JANNAF conference, while hot-fire test results of the preburner injector in the integrated test article are described in another companion paper.

Phonologically driven variability: the case of determiners.

PubMed

Bürki, Audrey; Laganaro, Marina; Alario, F Xavier

2014-09-01

Speakers usually produce words in connected speech. In such contexts, the form in which many words are uttered is influenced by the phonological properties of neighboring words. The current article examines the representations and processes underlying the production of phonologically constrained word form variations. For this purpose, we consider determiners whose form is sensitive to phonological context (e.g., in English: a car vs. an animal; in French: le chien 'the dog' vs. l'âne 'the donkey'). Two hypotheses have been proposed regarding how these words are processed. Determiners either are thought to have different representations for each of their surface forms, or they are thought to have only 1 representation while other forms are generated online after selection through a rule-based process. We tested the predictions derived from these 2 views in 3 picture naming experiments. Participants named pictures using determiner-adjective-noun phrases (e.g., la nouvelle table 'the new table'). Phonologically consistent or inconsistent conditions were contrasted, based on the phonological onsets of the adjective and the noun. Results revealed shorter naming latencies for consistent than for inconsistent sequences (i.e., a phonological consistency effect) for all the determiner types tested. Our interpretation of these findings converges on the assumption that determiners with varying surface forms are represented in memory with multiple phonological-lexical representations. This conclusion is discussed in relation to models of determiner processing and models of lexical variability.

14 CFR 35.33 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS: PROPELLERS Tests and Inspections § 35.33 General. (a) Each applicant must furnish test article(s... nature of the test. If needed for substantiation, the applicant may test a different propeller...

14 CFR 35.33 - General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS: PROPELLERS Tests and Inspections § 35.33 General. (a) Each applicant must furnish test article(s... nature of the test. If needed for substantiation, the applicant may test a different propeller...

14 CFR 35.33 - General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS: PROPELLERS Tests and Inspections § 35.33 General. (a) Each applicant must furnish test article(s... nature of the test. If needed for substantiation, the applicant may test a different propeller...

14 CFR 35.33 - General.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS: PROPELLERS Tests and Inspections § 35.33 General. (a) Each applicant must furnish test article(s... nature of the test. If needed for substantiation, the applicant may test a different propeller...

14 CFR 35.33 - General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... STANDARDS: PROPELLERS Tests and Inspections § 35.33 General. (a) Each applicant must furnish test article(s... nature of the test. If needed for substantiation, the applicant may test a different propeller...

Stylistic Patterns in Language Teaching Research Articles: A Multidimensional Analysis

ERIC Educational Resources Information Center

Kitjaroenpaiboon, Woravit; Getkham, Kanyarat

2016-01-01

This paper presents the results of a multidimensional analysis to investigate stylistic patterns and their communicative functions in language teaching research articles. The findings were that language teaching research articles contained six stylistic patterns and communicative functions. Pattern I consisted of seven salient positive features…

Challenges with controlling varicella in prison settings: experience of California, 2010 to 2011.

PubMed

Leung, Jessica; Lopez, Adriana S; Tootell, Elena; Baumrind, Nikki; Mohle-Boetani, Janet; Leistikow, Bruce; Harriman, Kathleen H; Preas, Christopher P; Cosentino, Giorgio; Bialek, Stephanie R; Marin, Mona

2014-10-01

This article describes the epidemiology of varicella in one state prison in California during 2010 and 2011, control measures implemented, and associated costs. Eleven varicella cases were reported, of which nine were associated with two outbreaks. One outbreak consisted of three cases and the second consisted of six cases with two generations of spread. Among exposed inmates serologically tested, 98% (643/656) were varicella-zoster virus seropositive. The outbreaks resulted in > 1,000 inmates exposed, 444 staff exposures, and > $160,000 in costs. The authors documented the challenges and costs associated with controlling and managing varicella in a prison setting. A screening policy for evidence of varicella immunity for incoming inmates and staff and vaccination of susceptible persons has the potential to mitigate the impact of future outbreaks and reduce resources necessary to manage cases and outbreaks. © The Author(s) 2014.

Genetic particle swarm parallel algorithm analysis of optimization arrangement on mistuned blades

NASA Astrophysics Data System (ADS)

Zhao, Tianyu; Yuan, Huiqun; Yang, Wenjun; Sun, Huagang

2017-12-01

This article introduces a method of mistuned parameter identification which consists of static frequency testing of blades, dichotomy and finite element analysis. A lumped parameter model of an engine bladed-disc system is then set up. A bladed arrangement optimization method, namely the genetic particle swarm optimization algorithm, is presented. It consists of a discrete particle swarm optimization and a genetic algorithm. From this, the local and global search ability is introduced. CUDA-based co-evolution particle swarm optimization, using a graphics processing unit, is presented and its performance is analysed. The results show that using optimization results can reduce the amplitude and localization of the forced vibration response of a bladed-disc system, while optimization based on the CUDA framework can improve the computing speed. This method could provide support for engineering applications in terms of effectiveness and efficiency.

Uplifting Fear Appeals: Considering the Role of Hope in Fear-Based Persuasive Messages.

PubMed

Nabi, Robin L; Myrick, Jessica Gall

2018-01-09

Fear appeal research has focused, understandably, on fear as the primary emotion motivating attitude and behavior change. However, while the threat component of fear appeals associates with fear responses, a fear appeals' efficacy component likely associates with a different emotional experience: hope. Drawing from appraisal theories of emotion in particular, this article theorizes about the role of hope in fear appeals, testing hypotheses with two existing data sets collected within the context of sun safety messages. In both studies, significant interactions between hope and self-efficacy emerged to predict behavioral intentions. Notable main effects for hope also emerged, though with less consistency. Further, these effects persisted despite controlling for the four cognitions typically considered central to fear appeal effectiveness. These results, consistent across two samples, support the claim that feelings of hope in response to fear appeals contribute to their persuasive success. Implications for developing a recursive model of fear appeal processing are discussed.

Modeling and Simulation of the Second-Generation Orion Crew Module Air Bag Landing System

NASA Technical Reports Server (NTRS)

Timmers, Richard B.; Hardy, Robin C.; Willey, Cliff E.; Welch, Joseph V.

2009-01-01

Air bags were evaluated as the landing attenuation system for earth landing of the Orion Crew Module (CM). Analysis conducted to date shows that airbags are capable of providing a graceful landing of the CM in nominal and off-nominal conditions such as parachute failure, high horizontal winds, and unfavorable vehicle/ground angle combinations, while meeting crew and vehicle safety requirements. The analyses and associated testing presented here surround a second generation of the airbag design developed by ILC Dover, building off of relevant first-generation design, analysis, and testing efforts. In order to fully evaluate the second generation air bag design and correlate the dynamic simulations, a series of drop tests were carried out at NASA Langley s Landing and Impact Research (LandIR) facility in Hampton, Virginia. The tests consisted of a full-scale set of air bags attached to a full-scale test article representing the Orion Crew Module. The techniques used to collect experimental data, develop the simulations, and make comparisons to experimental data are discussed.

Prototype space erectable radiator system ground test article development

NASA Technical Reports Server (NTRS)

Alario, Joseph P.

1988-01-01

A prototype heat rejecting system is being developed by NASA-JSC for possible space station applications. This modular system, the Space-Erectable Radiator System Ground Test Article (SERS-GTA) with high-capacity radiator panels, can be installed and replaced on-orbit. The design, fabrication and testing of a representative ground test article are discussed. Acceptance test data for the heat pipe radiator panel and the whiffletree clamping mechanism have been presented.

48 CFR 9.308-1 - Testing performed by the contractor.

Code of Federal Regulations, 2014 CFR

2014-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-1 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... material or to commence production before first article approval, the contracting officer shall use the...

48 CFR 9.308-1 - Testing performed by the contractor.

Code of Federal Regulations, 2012 CFR

2012-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-1 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... material or to commence production before first article approval, the contracting officer shall use the...

48 CFR 9.308-1 - Testing performed by the contractor.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-1 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... material or to commence production before first article approval, the contracting officer shall use the...

48 CFR 9.308-1 - Testing performed by the contractor.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-1 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... material or to commence production before first article approval, the contracting officer shall use the...

48 CFR 9.308-1 - Testing performed by the contractor.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ACQUISITION PLANNING CONTRACTOR QUALIFICATIONS First Article Testing and Approval 9.308-1 Testing performed by... produce the first article and the production quantity at the same facility, the contracting officer shall... material or to commence production before first article approval, the contracting officer shall use the...

Testing in Texas: Accountability for Bilingual Students.

ERIC Educational Resources Information Center

Porter, Rosalie Pedalino, Ed.

2000-01-01

This issue has a special, multi-article section on student testing in Texas and contains three additional and unrelated articles. "The Texas Testing Case Documents: G.I. Forum, et al. v. Texas Education Agency, et al." section has five articles: "Overview" (Roger Clegg); a copy of the "First Amended Complaint";…

Systematic review of the multidimensional fatigue symptom inventory-short form.

PubMed

Donovan, Kristine A; Stein, Kevin D; Lee, Morgan; Leach, Corinne R; Ilozumba, Onaedo; Jacobsen, Paul B

2015-01-01

Fatigue is a subjective complaint that is believed to be multifactorial in its etiology and multidimensional in its expression. Fatigue may be experienced by individuals in different dimensions as physical, mental, and emotional tiredness. The purposes of this study were to review and characterize the use of the 30-item Multidimensional Fatigue Symptom Inventory-Short Form (MFSI-SF) in published studies and to evaluate the available evidence for its psychometric properties. A systematic review was conducted to identify published articles reporting results for the MFSI-SF. Data were analyzed to characterize internal consistency reliability of multi-item MFSI-SF scales and test-retest reliability. Correlation coefficients were summarized to characterize concurrent, convergent, and divergent validity. Standardized effect sizes were calculated to characterize the discriminative validity of the MFSI-SF and its sensitivity to change. Seventy articles were identified. Sample sizes reported ranged from 10 to 529 and nearly half consisted exclusively of females. More than half the samples were composed of cancer patients; of those, 59% were breast cancer patients. Mean alpha coefficients for MFSI-SF fatigue subscales ranged from 0.84 for physical fatigue to 0.93 for general fatigue. The MFSI-SF demonstrated moderate test-retest reliability in a small number of studies. Correlations with other fatigue and vitality measures were moderate to large in size and in the expected direction. The MFSI-SF fatigue subscales were positively correlated with measures of distress, depressive, and anxious symptoms. Effect sizes for discriminative validity ranged from medium to large, while effect sizes for sensitivity to change ranged from small to large. Findings demonstrate the positive psychometric properties of the MFSI-SF, provide evidence for its usefulness in medically ill and nonmedically ill individuals, and support its use in future studies.

Design and Analysis of Subscale and Full-Scale Buckling-Critical Cylinders for Launch Vehicle Technology Development

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Lovejoy, Andrew E.; Thornburgh, Robert P.; Rankin, Charles

2012-01-01

NASA s Shell Buckling Knockdown Factor (SBKF) project has the goal of developing new analysis-based shell buckling design factors (knockdown factors) and design and analysis technologies for launch vehicle structures. Preliminary design studies indicate that implementation of these new knockdown factors can enable significant reductions in mass and mass-growth in these vehicles. However, in order to validate any new analysis-based design data or methods, a series of carefully designed and executed structural tests are required at both the subscale and full-scale levels. This paper describes the design and analysis of three different orthogrid-stiffeNed metallic cylindrical-shell test articles. Two of the test articles are 8-ft-diameter, 6-ft-long test articles, and one test article is a 27.5-ft-diameter, 20-ft-long Space Shuttle External Tank-derived test article.

Laboratory and field testing of commercial rotational seismometers

USGS Publications Warehouse

Nigbor, R.L.; Evans, J.R.; Hutt, C.R.

2009-01-01

There are a small number of commercially available sensors to measure rotational motion in the frequency and amplitude ranges appropriate for earthquake motions on the ground and in structures. However, the performance of these rotational seismometers has not been rigorously and independently tested and characterized for earthquake monitoring purposes as is done for translational strong- and weak-motion seismometers. Quantities such as sensitivity, frequency response, resolution, and linearity are needed for the understanding of recorded rotational data. To address this need, we, with assistance from colleagues in the United States and Taiwan, have been developing performance test methodologies and equipment for rotational seismometers. In this article the performance testing methodologies are applied to samples of a commonly used commercial rotational seismometer, the eentec model R-1. Several examples were obtained for various test sequences in 2006, 2007, and 2008. Performance testing of these sensors consisted of measuring: (1) sensitivity and frequency response; (2) clip level; (3) self noise and resolution; and (4) cross-axis sensitivity, both rotational and translational. These sensor-specific results will assist in understanding the performance envelope of the R-1 rotational seismometer, and the test methodologies can be applied to other rotational seismometers.

An instrument to assess the statistical intensity of medical research papers.

PubMed

Nieminen, Pentti; Virtanen, Jorma I; Vähänikkilä, Hannu

2017-01-01

There is widespread evidence that statistical methods play an important role in original research articles, especially in medical research. The evaluation of statistical methods and reporting in journals suffers from a lack of standardized methods for assessing the use of statistics. The objective of this study was to develop and evaluate an instrument to assess the statistical intensity in research articles in a standardized way. A checklist-type measure scale was developed by selecting and refining items from previous reports about the statistical contents of medical journal articles and from published guidelines for statistical reporting. A total of 840 original medical research articles that were published between 2007-2015 in 16 journals were evaluated to test the scoring instrument. The total sum of all items was used to assess the intensity between sub-fields and journals. Inter-rater agreement was examined using a random sample of 40 articles. Four raters read and evaluated the selected articles using the developed instrument. The scale consisted of 66 items. The total summary score adequately discriminated between research articles according to their study design characteristics. The new instrument could also discriminate between journals according to their statistical intensity. The inter-observer agreement measured by the ICC was 0.88 between all four raters. Individual item analysis showed very high agreement between the rater pairs, the percentage agreement ranged from 91.7% to 95.2%. A reliable and applicable instrument for evaluating the statistical intensity in research papers was developed. It is a helpful tool for comparing the statistical intensity between sub-fields and journals. The novel instrument may be applied in manuscript peer review to identify papers in need of additional statistical review.

Wind turbine blade testing system using base excitation

DOEpatents

Cotrell, Jason; Thresher, Robert; Lambert, Scott; Hughes, Scott; Johnson, Jay

2014-03-25

An apparatus (500) for fatigue testing elongate test articles (404) including wind turbine blades through forced or resonant excitation of the base (406) of the test articles (404). The apparatus (500) includes a testing platform or foundation (402). A blade support (410) is provided for retaining or supporting a base (406) of an elongate test article (404), and the blade support (410) is pivotally mounted on the testing platform (402) with at least two degrees of freedom of motion relative to the testing platform (402). An excitation input assembly (540) is interconnected with the blade support (410) and includes first and second actuators (444, 446, 541) that act to concurrently apply forces or loads to the blade support (410). The actuator forces are cyclically applied in first and second transverse directions. The test article (404) responds to shaking of its base (406) by oscillating in two, transverse directions (505, 507).

Impact Testing of Aluminum 2024 and Titanium 6Al-4V for Material Model Development

NASA Technical Reports Server (NTRS)

Pereira, J. Michael; Revilock, Duane M.; Lerch, Bradley A.; Ruggeri, Charles R.

2013-01-01

One of the difficulties with developing and verifying accurate impact models is that parameters such as high strain rate material properties, failure modes, static properties, and impact test measurements are often obtained from a variety of different sources using different materials, with little control over consistency among the different sources. In addition there is often a lack of quantitative measurements in impact tests to which the models can be compared. To alleviate some of these problems, a project is underway to develop a consistent set of material property, impact test data and failure analysis for a variety of aircraft materials that can be used to develop improved impact failure and deformation models. This project is jointly funded by the NASA Glenn Research Center and the FAA William J. Hughes Technical Center. Unique features of this set of data are that all material property data and impact test data are obtained using identical material, the test methods and procedures are extensively documented and all of the raw data is available. Four parallel efforts are currently underway: Measurement of material deformation and failure response over a wide range of strain rates and temperatures and failure analysis of material property specimens and impact test articles conducted by The Ohio State University; development of improved numerical modeling techniques for deformation and failure conducted by The George Washington University; impact testing of flat panels and substructures conducted by NASA Glenn Research Center. This report describes impact testing which has been done on aluminum (Al) 2024 and titanium (Ti) 6Al-4vanadium (V) sheet and plate samples of different thicknesses and with different types of projectiles, one a regular cylinder and one with a more complex geometry incorporating features representative of a jet engine fan blade. Data from this testing will be used in validating material models developed under this program. The material tests and the material models developed in this program will be published in separate reports.

Critical appraisal of emergency medicine education research: the best publications of 2013.

PubMed

Farrell, Susan E; Kuhn, Gloria J; Coates, Wendy C; Shayne, Phillip H; Fisher, Jonathan; Maggio, Lauren A; Lin, Michelle

2014-11-01

The objective was to critically appraise and highlight methodologically superior medical education research articles published in 2013 whose outcomes are pertinent to teaching and education in emergency medicine (EM). A search of the English-language literature in 2013 querying Education Resources Information Center (ERIC), PsychINFO, PubMed, and Scopus identified 251 EM-related studies using hypothesis-testing or observational investigations of educational interventions. Two reviewers independently screened all of the publications and removed articles using established exclusion criteria. Six reviewers then independently scored the remaining 43 publications using either a qualitative a or quantitative scoring system, based on the research methodology of each article. Each scoring system consisted of nine criteria. Selected criteria were based on accepted educational review literature and chosen a priori. Both scoring systems used parallel scoring metrics and have been used previously within this annual review. Forty-three medical education research papers (37 quantitative and six qualitative studies) met the a priori criteria for inclusion and were reviewed. Six quantitative and one qualitative study were scored and ranked most highly by the reviewers as exemplary and are summarized in this article. This annual critical appraisal article aims to promote superior research in EM-related education, by reviewing and highlighting seven of 43 major education research studies, meeting a priori criteria, and published in 2013. Common methodologic pitfalls in the 2013 papers are noted, and current trends in medical education research in EM are discussed. © 2014 by the Society for Academic Emergency Medicine.

21 CFR 58.47 - Facilities for handling test and control articles.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Facilities for handling test and control articles. 58.47 Section 58.47 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... for handling test and control articles. (a) As necessary to prevent contamination or mixups, there...

The effects of corrosive substances on human bone, teeth, hair, nails, and soft tissue.

PubMed

Hartnett, Kristen M; Fulginiti, Laura C; Di Modica, Frank

2011-07-01

This research investigates the effects of household chemicals on human tissues. Five different human tissues (bone, tooth, hair, fingernails, and skin/muscle/fat) were immersed into six different corrosive agents. These agents consisted of hydrochloric acid, sulfuric acid, lye, bleach, organic septic cleaner, and Coca-Cola(®) soda. Tap water was used as a control. Tissue samples were cut to consistent sizes and submerged in the corrosive liquids. Over time, the appearance, consistency, and weight were documented. Hydrochloric acid was the most destructive agent in this study, consuming most tissues within 24 h. Sulfuric acid was the second most destructive agent in this study. Bleach, lye, and cola had no structural effects on the hard tissues of the body, but did alter the appearance or integrity of the hair, nails, or flesh in some way. The organic septic cleaner and tap water had no effect on any of the human tissue tested during the timeframe of the study. 2011 American Academy of Forensic Sciences. Published 2011. This article is a U.S. Government work and is in the public domain in the U.S.A.

An overview of the BIOASQ large-scale biomedical semantic indexing and question answering competition.

PubMed

Tsatsaronis, George; Balikas, Georgios; Malakasiotis, Prodromos; Partalas, Ioannis; Zschunke, Matthias; Alvers, Michael R; Weissenborn, Dirk; Krithara, Anastasia; Petridis, Sergios; Polychronopoulos, Dimitris; Almirantis, Yannis; Pavlopoulos, John; Baskiotis, Nicolas; Gallinari, Patrick; Artiéres, Thierry; Ngomo, Axel-Cyrille Ngonga; Heino, Norman; Gaussier, Eric; Barrio-Alvers, Liliana; Schroeder, Michael; Androutsopoulos, Ion; Paliouras, Georgios

2015-04-30

This article provides an overview of the first BIOASQ challenge, a competition on large-scale biomedical semantic indexing and question answering (QA), which took place between March and September 2013. BIOASQ assesses the ability of systems to semantically index very large numbers of biomedical scientific articles, and to return concise and user-understandable answers to given natural language questions by combining information from biomedical articles and ontologies. The 2013 BIOASQ competition comprised two tasks, Task 1a and Task 1b. In Task 1a participants were asked to automatically annotate new PUBMED documents with MESH headings. Twelve teams participated in Task 1a, with a total of 46 system runs submitted, and one of the teams performing consistently better than the MTI indexer used by NLM to suggest MESH headings to curators. Task 1b used benchmark datasets containing 29 development and 282 test English questions, along with gold standard (reference) answers, prepared by a team of biomedical experts from around Europe and participants had to automatically produce answers. Three teams participated in Task 1b, with 11 system runs. The BIOASQ infrastructure, including benchmark datasets, evaluation mechanisms, and the results of the participants and baseline methods, is publicly available. A publicly available evaluation infrastructure for biomedical semantic indexing and QA has been developed, which includes benchmark datasets, and can be used to evaluate systems that: assign MESH headings to published articles or to English questions; retrieve relevant RDF triples from ontologies, relevant articles and snippets from PUBMED Central; produce "exact" and paragraph-sized "ideal" answers (summaries). The results of the systems that participated in the 2013 BIOASQ competition are promising. In Task 1a one of the systems performed consistently better from the NLM's MTI indexer. In Task 1b the systems received high scores in the manual evaluation of the "ideal" answers; hence, they produced high quality summaries as answers. Overall, BIOASQ helped obtain a unified view of how techniques from text classification, semantic indexing, document and passage retrieval, question answering, and text summarization can be combined to allow biomedical experts to obtain concise, user-understandable answers to questions reflecting their real information needs.

Mindfulness: A systematic review of instruments to measure an emergent patientreported outcome (PRO)

PubMed Central

Park, Taehwan; Reilly-Spong, Maryanne

2013-01-01

Purpose Mindfulness has emerged as an important health concept based on evidence that mindfulness interventions reduce symptoms and improve health-related quality of life. The objectives of this study were to systematically assess and compare the properties of instruments to measure self-reported mindfulness. Methods Ovid Medline®, CINAHL®, and PsycINFO® were searched through May 2012, and articles were selected if their primary purpose was development or evaluation of the measurement properties (validity, reliability, responsiveness) of a self-report mindfulness scale. Two reviewers independently evaluated the methodological quality of the selected studies using the COnsensus-based Standards for the selection of health status Measurement INstruments (COSMIN) checklist. Discrepancies were discussed with a third reviewer, and scored by consensus. Finally, a level of evidence approach was used to synthesize results and study quality. Results Our search strategy identified a total of 2,588 articles. Forty-six articles, reporting 79 unique studies, met inclusion criteria. Ten instruments quantifying mindfulness as a unidimensional scale (n=5) or as a set of 2 to 5 subscales (n=5) were reviewed. The Mindful Attention Awareness Scale (MAAS) was evaluated by the most studies (n=27), and had positive overall quality ratings for most of the psychometric properties reviewed. The Five Facet Mindfulness Questionnaire (FFMQ) received the highest possible rating (“consistent findings in multiple studies of good methodological quality”) for two properties, internal consistency and construct validation by hypothesis testing. However, none of the instruments had sufficient evidence of content validity. Comprehensiveness of construct coverage had not been assessed; qualitative methods to confirm understanding and relevance were absent. In addition, estimates of test-retest reliability, responsiveness, or measurement error to guide users in protocol development or interpretation of scores were lacking. Conclusions Current mindfulness scales have important conceptual differences, and none can be strongly recommended based solely on superior psychometric properties. Important limitations in the field are the absence of qualitative evaluations and accepted external referents to support construct validity. Investigators need to proceed cautiously before optimizing any mindfulness intervention based on the existing scales. PMID:23539467

Numerical binary black hole mergers in dynamical Chern-Simons gravity: Scalar field

NASA Astrophysics Data System (ADS)

Okounkova, Maria; Stein, Leo C.; Scheel, Mark A.; Hemberger, Daniel A.

2017-08-01

Testing general relativity in the nonlinear, dynamical, strong-field regime of gravity is one of the major goals of gravitational wave astrophysics. Performing precision tests of general relativity (GR) requires numerical inspiral, merger, and ringdown waveforms for binary black hole (BBH) systems in theories beyond GR. Currently, GR and scalar-tensor gravity are the only theories amenable to numerical simulations. In this article, we present a well-posed perturbation scheme for numerically integrating beyond-GR theories that have a continuous limit to GR. We demonstrate this scheme by simulating BBH mergers in dynamical Chern-Simons gravity (dCS), to linear order in the perturbation parameter. We present mode waveforms and energy fluxes of the dCS pseudoscalar field from our numerical simulations. We find good agreement with analytic predictions at early times, including the absence of pseudoscalar dipole radiation. We discover new phenomenology only accessible through numerics: a burst of dipole radiation during merger. We also quantify the self-consistency of the perturbation scheme. Finally, we estimate bounds that GR-consistent LIGO detections could place on the new dCS length scale, approximately ℓ≲O (10 ) km .

Clinical Application of Genome and Exome Sequencing as a Diagnostic Tool for Pediatric Patients: a Scoping Review of the Literature.

PubMed

Smith, Hadley Stevens; Swint, J Michael; Lalani, Seema R; Yamal, Jose-Miguel; de Oliveira Otto, Marcia C; Castellanos, Stephan; Taylor, Amy; Lee, Brendan H; Russell, Heidi V

2018-05-14

Availability of clinical genomic sequencing (CGS) has generated questions about the value of genome and exome sequencing as a diagnostic tool. Analysis of reported CGS application can inform uptake and direct further research. This scoping literature review aims to synthesize evidence on the clinical and economic impact of CGS. PubMed, Embase, and Cochrane were searched for peer-reviewed articles published between 2009 and 2017 on diagnostic CGS for infant and pediatric patients. Articles were classified according to sample size and whether economic evaluation was a primary research objective. Data on patient characteristics, clinical setting, and outcomes were extracted and narratively synthesized. Of 171 included articles, 131 were case reports, 40 were aggregate analyses, and 4 had a primary economic evaluation aim. Diagnostic yield was the only consistently reported outcome. Median diagnostic yield in aggregate analyses was 33.2% but varied by broad clinical categories and test type. Reported CGS use has rapidly increased and spans diverse clinical settings and patient phenotypes. Economic evaluations support the cost-saving potential of diagnostic CGS. Multidisciplinary implementation research, including more robust outcome measurement and economic evaluation, is needed to demonstrate clinical utility and cost-effectiveness of CGS.

Media ratings for movies, music, video games, and television: a review of the research and recommendations for improvements.

PubMed

Gentile, Douglas A; Humphrey, Jeremy; Walsh, David A

2005-06-01

This article review is organized by studies that are relevant for testing the reliability and validity of ratings systems. Specifically, the interrater reliability, consistency, temporal stability, content validity, construct validity, and criterion validity of media ratings systems are reviewed. Data that are related to testing the "forbidden fruit" and "tainted fruit" hypotheses also are reviewed. Several changes are recommended to improve the ratings systems, including the creation of a universal ratings system that could be applied equally to all media. The research reviewed here can provide a guide for how to construct a reliable, valid, and more useful ratings system. This is important because the decisions that parents make regarding their children's media use can be only as good as the information to which the parents have access.

Clinical assessment of the male fertility

PubMed Central

Khatun, Amena; Rahman, Md Saidur

2018-01-01

The evaluation of infertility in males consists of physical examination and semen analyses. Standardized semen analyses depend on the descriptive analysis of sperm motility, morphology, and concentration, with a threshold level that must be surpassed to be considered a fertile spermatozoon. Nonetheless, these conventional parameters are not satisfactory for clinicians since 25% of infertility cases worldwide remain unexplained. Therefore, newer tests methods have been established to investigate sperm physiology and functions by monitoring characteristics such as motility, capacitation, the acrosome reaction, reactive oxygen species, sperm DNA damage, chromatin structure, zona pellucida binding, and sperm-oocyte fusion. After the introduction of intracytoplasmic sperm injection technique, sperm maturity, morphology, and aneuploidy conditions have gotten more attention for investigating unexplained male infertility. In the present article, recent advancements in research regarding the utilization of male fertility prediction tests and their role and accuracy are reviewed. PMID:29564308

Evaluation of annual corrosion tests for aggressive water

NASA Astrophysics Data System (ADS)

Dubová, V.; Ilavský, J.; Barloková, D.

2011-12-01

Internal corrosion has a significant effect on the useful life of pipes, the hydraulic conditions of a distribution system and the quality of the water transported. All water is corrosive under some conditions, and the level of this corrosion depends on the physical and chemical properties of the water and properties of the pipe material. Galvanic treatment is an innovation for protecting against corrosion, and this method is also suitable for removal of water stone too. This method consists of the electrogalvanic principle, which is generated by the flowing of water between a zinc anode and the cupro-alloy cover of a column. This article presents experimental corrosion tests at water resource Pernek (This water resource-well marked as HL-1 is close to the Pernek of village), where the device is operating based on this principle.

Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

NASA Image and Video Library

2017-04-25

The Orion Exploration Mission-1 (EM-1) structural test article, inside its transport container, is secured in NASA's Super Guppy aircraft at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

NASA Image and Video Library

2017-04-25

The Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, is loaded into NASA's Super Guppy aircraft at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

"Why bother so incredibly much?": student perspectives on PISA science assignments

NASA Astrophysics Data System (ADS)

Serder, Margareta; Jakobsson, Anders

2015-09-01

Large-scale assessment, such as the Programme for International Assessment (PISA), plays an increasingly important role in current educational practice and politics. However, many scholars have questioned the validity and reliability of the tests and the extent to which they actually constitute trustworthy representations of students' knowledge. In the light of such critical voices the present article adopts a sociocultural perspective of human knowledge and action in order to explore the encounters between students and the science test assignments with which their knowledge is tested. Of particular interest in this study are the described "real-life situations" presented as the relevant background in which scientific literacy is assessed in PISA. According to the sociocultural theoretical onset the methodology used to approach the students' meaning making of the image of science as portrayed in the test were collaborative situations in which students work in small groups with units of PISA assignments, enabling a study of student-assignment encounters in action. The data we worked with consists of video-recordings from 71 Swedish 15-year-old students working with three released units from the PISA science test. According to our analysis, the "real-life situations" described in the test emerge as problematic in the students' meaning-making. This is demonstrated for instance by the students' positioning themselves as being different from and opposed to the fictional pictured students who appear in the backstories of the test. This article provides examples of how the scientific and academic language used by the fictional students in the assignments mediates distance and resistance among the students. The fictional students' use of strict scientific language and methods in day-to-day life situations leads them to be perceived as "little scientists" and as elite stereotypes of the scientific culture. We conclude that, by using assignments of this type, measurements of students' knowledge in science run the risk of becoming a measurement of cultural consistency regarding how well students will overcome the hurdles of scientific cultures. We mean that all though understanding the scientific culture is an important goal for science education, there is a problem that the assessment organizations communicate the results as representations of students' knowledge in science. This study adheres to research that advises caution in not over-interpreting the PISA results and stresses that understanding students' "knowledge" about science is much more complex than what is communicated by the international assessment organizations.

Orion EM-1 Crew Module Structural Test Article Move to Birdcage

NASA Image and Video Library

2016-11-16

Inside the Neil Armstrong Operations and Checkout Building at NASA’s Kennedy Space Center in Florida, the Orion crew module structural test article (STA) is secured on a test tool called the birdcage. The STA arrived aboard NASA's Super Guppy aircraft at the Shuttle Landing Facility operated by Space Florida. The test article will undergo further testing in the high bay. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Liquid oxygen (LO2) propellant conditioning concept testing

NASA Technical Reports Server (NTRS)

Perry, Gretchen L. E.; Orth, Michael S.; Mehta, Gopal K.

1993-01-01

Testing of a simplified LO2 propellant conditioning concept for future expendable launch vehicles is discussed. Four different concepts are being investigated: no-bleed, low-bleed, use of a recirculation line, and He bubbling. A full-scale test article, which is a facsimile of a propellant feed duct with an attached section to simulate heat input from an LO2 turbopump, is to be tested at the Cold Flow Facility of the Marshall Space Flight Center West Test Area. Work to date includes: design and fabrication of the test article, design of the test facility and initial fabrication, development of a test matrix and test procedures, initial predictions of test output, and heat leak calibration and heat exchanger tests on the test articles.

Verification of Ceramic Structures

NASA Astrophysics Data System (ADS)

Behar-Lafenetre, Stephanie; Cornillon, Laurence; Rancurel, Michael; De Graaf, Dennis; Hartmann, Peter; Coe, Graham; Laine, Benoit

2012-07-01

In the framework of the “Mechanical Design and Verification Methodologies for Ceramic Structures” contract [1] awarded by ESA, Thales Alenia Space has investigated literature and practices in affiliated industries to propose a methodological guideline for verification of ceramic spacecraft and instrument structures. It has been written in order to be applicable to most types of ceramic or glass-ceramic materials - typically Cesic®, HBCesic®, Silicon Nitride, Silicon Carbide and ZERODUR®. The proposed guideline describes the activities to be performed at material level in order to cover all the specific aspects of ceramics (Weibull distribution, brittle behaviour, sub-critical crack growth). Elementary tests and their post-processing methods are described, and recommendations for optimization of the test plan are given in order to have a consistent database. The application of this method is shown on an example in a dedicated article [7]. Then the verification activities to be performed at system level are described. This includes classical verification activities based on relevant standard (ECSS Verification [4]), plus specific analytical, testing and inspection features. The analysis methodology takes into account the specific behaviour of ceramic materials, especially the statistical distribution of failures (Weibull) and the method to transfer it from elementary data to a full-scale structure. The demonstration of the efficiency of this method is described in a dedicated article [8]. The verification is completed by classical full-scale testing activities. Indications about proof testing, case of use and implementation are given and specific inspection and protection measures are described. These additional activities are necessary to ensure the required reliability. The aim of the guideline is to describe how to reach the same reliability level as for structures made of more classical materials (metals, composites).

False Positive Stress Testing: Does Endothelial Vascular Dysfunction Contribute to ST-Segment Depression in Women? A Pilot Study.

PubMed

Sharma, Shilpa; Mehta, Puja K; Arsanjani, Reza; Sedlak, Tara; Hobel, Zachary; Shufelt, Chrisandra; Jones, Erika; Kligfield, Paul; Mortara, David; Laks, Michael; Diniz, Marcio; Bairey Merz, C Noel

2018-06-19

The utility of exercise-induced ST-segment depression for diagnosing ischemic heart disease (IHD) in women is unclear. Based on evidence that IHD pathophysiology in women involves coronary vascular dysfunction, we hypothesized that coronary vascular dysfunction contributes to exercise electrocardiography (Ex-ECG) ST-depression in the absence of obstructive CAD, so-called "false positive" results. We tested our hypothesis in a pilot study evaluating the relationship between peripheral vascular endothelial function and Ex-ECG. Twenty-nine asymptomatic women without cardiac risk factors underwent maximal Bruce protocol exercise treadmill testing and peripheral endothelial function assessment using peripheral arterial tonometry (Itamar EndoPAT 2000) to measure reactive hyperemia index (RHI). The relationship between RHI and Ex-ECG ST-segment depression was evaluated using logistic regression and differences in subgroups using two-tailed t-tests. Mean age was 54 ± 7 years, body mass index 25 ± 4 kg/m 2 , and RHI 2.51 ± 0.66. Three women (10%) had RHI less than 1.68, consistent with abnormal peripheral endothelial function, while 18 women (62%) met criteria for a positive Ex-ECG based on ST-segment depression in contiguous leads. Women with and without ST-segment depression had similar baseline and exercise vital signs, metabolic equivalents (METS) achieved, and RHI (all p>0.05). RHI did not predict ST-segment depression. Our pilot study demonstrates a high prevalence of exercise-induced ST-segment depression in asymptomatic, middle-aged, overweight women. Peripheral vascular endothelial dysfunction did not predict Ex-ECG ST-segment depression. Further work is needed to investigate the utility of vascular endothelial testing and Ex-ECG for IHD diagnostic and management purposes in women. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

STRUCTURAL TEST ARTICLE

NASA Image and Video Library

2016-04-06

FROM RIGHT, KATHRYN GUELDE AND ASHLEY HOLLADAY OF AERIE AEROSPACE LLC IN HUNTSVILLE, INSTALL THE STRUCTURAL TEST ARTICLE FOR THE FIRST SERIES OF COMPOSITE TESTS FOR THE SHELL BUCKLING KNOCKDOWN FACTOR PROJECT.

Size and Strength: Do We Need Both to Measure Vocabulary Knowledge?

ERIC Educational Resources Information Center

Laufer, B.; Elder, C.; Hill, K.; Congdon, P.

2004-01-01

This article describes the development and validation of a test of vocabulary size and strength. The first part of the article sets out the theoretical rationale for the test, and describes how the size and strength constructs have been conceptualized and operationalized. The second part of the article focusses on the process of test validation,…

Design and clinical pilot testing of the model-based dynamic insulin sensitivity and secretion test (DISST).

PubMed

Lotz, Thomas F; Chase, J Geoffrey; McAuley, Kirsten A; Shaw, Geoffrey M; Docherty, Paul D; Berkeley, Juliet E; Williams, Sheila M; Hann, Christopher E; Mann, Jim I

2010-11-01

Insulin resistance is a significant risk factor in the pathogenesis of type 2 diabetes. This article presents pilot study results of the dynamic insulin sensitivity and secretion test (DISST), a high-resolution, low-intensity test to diagnose insulin sensitivity (IS) and characterize pancreatic insulin secretion in response to a (small) glucose challenge. This pilot study examines the effect of glucose and insulin dose on the DISST, and tests its repeatability. DISST tests were performed on 16 subjects randomly allocated to low (5 g glucose, 0.5 U insulin), medium (10 g glucose, 1 U insulin) and high dose (20 g glucose, 2 U insulin) protocols. Two or three tests were performed on each subject a few days apart. Average variability in IS between low and medium dose was 10.3% (p=.50) and between medium and high dose 6.0% (p=.87). Geometric mean variability between tests was 6.0% (multiplicative standard deviation (MSD) 4.9%). Geometric mean variability in first phase endogenous insulin response was 6.8% (MSD 2.2%). Results were most consistent in subjects with low IS. These findings suggest that DISST may be an easily performed dynamic test to quantify IS with high resolution, especially among those with reduced IS. © 2010 Diabetes Technology Society.

Sub-Scale Testing and Development of the J-2X Fuel Turbopump Inducer

NASA Technical Reports Server (NTRS)

Sargent, Scott R.; Becht, David G.

2011-01-01

In the early stages of the J-2X upper stage engine program, various inducer configurations proposed for use in the fuel turbopump (FTP) were tested in water. The primary objectives of this test effort were twofold. First, to obtain a more comprehensive data set than that which existed in the Pratt & Whitney Rocketdyne (PWR) historical archives from the original J-2S program, and second, to supplement that data set with information regarding the cavitation induced vibrations for both the historical J-2S configuration as well as those tested for the J-2X program. The J-2X FTP inducer, which actually consists of an inducer stage mechanically attached to a kicker stage, underwent 4 primary iterations utilizing sub-scaled test articles manufactured and tested in PWR's Engineering Development Laboratory (EDL). The kicker remained unchanged throughout the test series. The four inducer configurations tested retained many of the basic design features of the J-2S inducer, but also included variations on leading edge blade thickness and blade angle distribution, primarily aimed at improving suction performance at higher flow coefficients. From these data sets, the effects of the tested design variables on hydrodynamic performance and cavitation instabilities were discerned. A limited comparison of impact to the inducer efficiency was determined as well.

[The Evans case and the right not to be forced to reproduce].

PubMed

Alkorta Idiakez, Itziar

2006-01-01

The article analyses the ruling of the European Court of Human Rights, Evans v. United Kingdom, of March 7, 2006 (application no. 6339/05) from the perspective of the nature and the effects of a consent together with the conservation and disposal of cryopreserved embryos. Several prevailing normative models are studied in order to look at the disposal of embryos and to test its legal consistency. As a conclusion and basing it on the Evans case, there is a proposition to distinguish between the acts of disposal of spare embryos from IVF programs and the deposit of embryos as a way to prevent lack of fertility.

Millisecond accuracy video display using OpenGL under Linux.

PubMed

Stewart, Neil

2006-02-01

To measure people's reaction times to the nearest millisecond, it is necessary to know exactly when a stimulus is displayed. This article describes how to display stimuli with millisecond accuracy on a normal CRT monitor, using a PC running Linux. A simple C program is presented to illustrate how this may be done within X Windows using the OpenGL rendering system. A test of this system is reported that demonstrates that stimuli may be consistently displayed with millisecond accuracy. An algorithm is presented that allows the exact time of stimulus presentation to be deduced, even if there are relatively large errors in measuring the display time.

A Multi-Scale Method for Dynamics Simulation in Continuum Solvent Models I: Finite-Difference Algorithm for Navier-Stokes Equation

PubMed Central

Xiao, Li; Cai, Qin; Li, Zhilin; Zhao, Hongkai; Luo, Ray

2014-01-01

A multi-scale framework is proposed for more realistic molecular dynamics simulations in continuum solvent models by coupling a molecular mechanics treatment of solute with a fluid mechanics treatment of solvent. This article reports our initial efforts to formulate the physical concepts necessary for coupling the two mechanics and develop a 3D numerical algorithm to simulate the solvent fluid via the Navier-Stokes equation. The numerical algorithm was validated with multiple test cases. The validation shows that the algorithm is effective and stable, with observed accuracy consistent with our design. PMID:25404761

Aeronautical Engineering: A Continuing Bibliography With Indexes. Supplement 414

NASA Technical Reports Server (NTRS)

2000-01-01

This report lists reports, articles and other documents recently announced in the NASA STI Database. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles. Each entry in the publication consists of a standard bibliographic citation accompanied, in most cases, by an abstract. The NASA CASI price code table, addresses of organizations, and document availability information are included before the abstract section. Two indexes-subject and author are included after the abstract section.

Neurology education: current and emerging concepts in residency and fellowship training.

PubMed

Stern, Barney J; Józefowicz, Ralph F; Kissela, Brett; Lewis, Steven L

2010-05-01

This article discusses the current and future state of neurology training. A priority is to attract sufficient numbers of qualified candidates for the existing residency programs. A majority of neurology residents elects additional training in a neurologic subspecialty, and programs will have to be accredited accordingly. Attempts are being made to standardize and strengthen the existing general residency and subspecialty programs through cooperative efforts. Ultimately, residency programs must comply with the increasing requirements and try to adapt these requirements to the unique demands and realities of neurology training. An effort is underway to establish consistent competency-testing methods. Copyright 2010 Elsevier Inc. All rights reserved.

Clamp usable as jig and lifting clamp

DOEpatents

Tsuyama, Yoshizo

1976-01-01

There is provided a clamp which is well suited for use as a lifting clamp for lifting and moving materials of assembly in a shipyard, etc. and as a pulling jig in welding and other operations. The clamp comprises a clamp body including a shackle for engagement with a pulling device and a slot for receiving an article, and a pair of jaws provided on the leg portions of the clamp body on the opposite sides of the slot to grip the article in the slot, one of said jaws consisting of a screw rod and the other jaw consisting of a swivel jaw with a spherical surface, whereby when the article clamped in the slot by the pair of jaws tends to slide in any direction with respect to the clamp body, the article is more positively gripped by the pair of jaws.

Da Que Hablar (Something To Talk About).

ERIC Educational Resources Information Center

Da Que Hablar, 1997

1997-01-01

This document consists of three issues of a newsletter published during 1996 and 1997. Issues contain current events articles in Spanish and classroom language learning activities based on those articles. The articles are brief; topics include: the Beatles; the route of Don Quixote; pets; the climate, architecture, history and food of Castile and…

MAHFIL: A Quarterly of South Asian Literature, Spring-Summer 1971.

ERIC Educational Resources Information Center

Coppola, Carlo, Ed.

This volume contains both literature from South Asia and articles about South Asian literature. The first article consists of an interview with a leading Pakistani poet, N.M. Rashed, who discusses modern Urdu literature. Other articles are: "Five 'Dangerous' Books"--on censorship in East Pakistan--by P. Sarkar; "Baluchi Language and…

Helping Students Cope with Fears and Crises.

ERIC Educational Resources Information Center

Walz, Garry R., Ed.; Bleuer, Jeanne C., Ed.

This document consists of two modules extracted from a six-module larger work. Module 1 presents six articles on the topic of "helping students to cope with fears and crises." Module 2 contains 17 articles on "programs and practices for helping students cope with fears and crises." Article titles and authors are as follows: (1)…

Council of Europe News-Letter 1/76.

ERIC Educational Resources Information Center

Council of Europe, Strasbourg (France). Documentation Center for Education in Europe.

This newsletter consists of two parts. The first contains two articles of general interest to nations belonging to the Council of Europe, and the second contains brief reports on educational developments in eleven European countries. Seven articles are written in English and six in French. General interest articles include a discussion of the role…

Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

NASA Image and Video Library

2017-04-25

On the tarmac at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, the Orion Exploration Mission-1 (EM-1) structural test article, secured in its transport container, is loaded into the agency's Super Guppy aircraft. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

NASA Image and Video Library

2017-04-25

On the tarmac at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, the agency's Super Guppy aircraft closes after the Orion Exploration Mission-1 (EM-1) structural test article, in its transport container, is secured inside. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

Metrics for Analyzing Quantifiable Differentiation of Designs with Varying Integrity for Hardware Assurance

DTIC Science & Technology

2017-03-01

proposed. Expected profiles can incorporate a level of overdesign. Finally, the Design Integrity measuring techniques are applied to five Test Article ...Inserted into Test System Table 2 presents the results of the analysis applied to each of the test article designs. Each of the domains are...the lowest integrities. Based on the analysis, the DI metric shows measurable differentiation between all five Test Article Error Location Error

Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

NASA Image and Video Library

2017-04-25

The Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, arrives at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The test article will be loaded into NASA's Super Guppy aircraft, in view at left, and transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

Development and validation of the assessment of health literacy in breast and cervical cancer screening.

PubMed

Han, Hae-Ra; Huh, Boyun; Kim, Miyong T; Kim, Jiyun; Nguyen, Tam

2014-01-01

For many people limited health literacy is a major barrier to effective preventive health behavior such as cancer screening, yet a comprehensive health literacy measure that is specific to breast and cervical cancer screening is not readily available. The purpose of this article is to describe the development and testing of a new instrument to measure health literacy in the context of breast and cervical cancer screening, the Assessment of Health Literacy in Cancer Screening (AHL-C). The AHL-C is based on Baker's conceptualization of health literacy and modeled from the two most popular health literacy tests, the Rapid Estimate of Adult Literacy in Medicine and the Test of Functional Health Literacy in Adults. The AHL-C consists of four subscales; print literacy, numeracy, comprehension, and familiarity. We used baseline data from 560 Korean American immigrant women who participated in a community-based randomized trial designed to test the effect of a health literacy-focused intervention to promote breast and cervical cancer screening. Rigorous psychometric testing supports that the AHL-C is reliable, valid, and significantly correlated with theoretically selected variables. Future research is needed to test the utility of the AHL-C in predicting cancer screening outcomes.

Migration Selection, Protection, and Acculturation in Health: A Binational Perspective on Older Adults

PubMed Central

Riosmena, Fernando; Wong, Rebeca; Palloni, Alberto

2012-01-01

In this article, we test for four potential explanations of the Hispanic Health Paradox (HHP): the “salmon bias,” emigration selection, and sociocultural protection originating in either destination or sending country. To reduce biases related to attrition by return migration typical of most U.S.-based surveys, we combine data from the Mexican Health and Aging Study in Mexico and the U.S. National Health Interview Survey to compare self-reported diabetes, hypertension, current smoking, obesity, and self-rated health among Mexican-born men ages 50 and older according to their previous U.S. migration experience, and U.S.-born Mexican Americans and non-Hispanic whites. We also use height, a measure of health during childhood, to bolster some of our tests. We find an immigrant advantage relative to non-Hispanic whites in hypertension and, to a lesser extent, obesity. We find evidence consistent with emigration selection and the salmon bias in height, hypertension, and self-rated health among immigrants with less than 15 years of experience in the United States; we do not find conclusive evidence consistent with sociocultural protection mechanisms. Finally, we illustrate that although ignoring return migrants when testing for the HHP and its mechanisms, as well as for the association between U.S. experience and health, exaggerates these associations, they are not fully driven by return migration-related attrition. PMID:23192395

Update of the equations of the limit state of the structural material with the realization of their deformation

NASA Astrophysics Data System (ADS)

Zenkov, E. V.

2018-01-01

Two methods are given in the article by considering the type of stressed-Deformed state (SDS) based on equations limit condition and analyzing the results of laboratory tests of special specimens for mechanical testing, focus having destruction thereof in the same view of SDS as in focus possible destruction of the structural member. The considered limited use of these methods in terms of considering physically consistent strength criterion type Pisarenko-Lebedev. A revised design-experimental procedure for determining the strength of the material of the structure, combining therein the elements of these two methods, consisting in determining the strength parameters of construction material, entering criterion equation Pisarenko-Lebedev, considering the actual appearance of the region-of-interest SDS structure. The implementation of the procedure is performed on the basis of the selection of the respective experimental laboratory specimens for mechanical testing, plan SDS in working zone coinciding with a SDS: structure whose strength is evaluated. The refinement process limit state equations demonstrated in determining 50CrV4 steel strength parameters, being in a state of biaxial stretching. Design-experimentally determined by, that steel for a given voltage limit value is almost a quarter of its value is reduced compared to the conventional tensile strength. value is reduced compared to the conventional tensile strength.

The Psychosocial Impact of Assistive Devices Scale (PIADS): translation and psychometric evaluation of a Chinese (Taiwanese) version.

PubMed

Hsieh, Yi-Ju; Lenker, James A

2006-01-01

Chinese language instruments for measuring the impact of assistive technology are needed. This article reports on the development and preliminary evaluation of a Chinese (Taiwanese) translation of the Psychosocial Impact of Assistive Devices Scale. The language translation process followed standard procedures for cross-cultural adaptation, including: two versions of forward and backward translations, committee review, and pilot testing with bilingual participants. Test-retest reliability, internal consistency, and concurrent validity of the Chinese PIADS (C-PIADS) were evaluated with 60 participants from Taiwan who wear eyeglasses or contact lenses. Cronbach's alpha values for internal consistency ranged from 0.72 to 0.93 for the C-PIADS total scale and three subscales. Test-retest reliability was evaluated using intraclass correlation coefficient analysis, which produced values ranging from 0.79 to 0.88 for the overall C-PIADS score and three sub-scales. Overall C-PIADS scores were not statistically different from data obtained from a similar device user population in the original PIADS validation study. The results of our preliminary psychometric assessment support continued development of the C-PIADS. Future research should focus on three things: additional data collection from a similar participant population, data collection from people with disabilities using assistive technology in Taiwan; and modification of the C-PIADS for use in other Mandarin-speaking regions, e.g., China and Hong Kong.

Coated conductors

DOEpatents

Arendt, Paul N.; Foltyn, Stephen R.; Stan, Liliana; Usov, Igor O.; Wang, Haiyan

2010-06-15

Articles are provided including a base substrate having a layer of an IBAD oriented material thereon, and, a layer of barium-containing material selected from the group consisting of barium zirconate, barium hafnate, barium titanate, barium strontium titanate, barium dysprosium zirconate, barium neodymium zirconate and barium samarium zirconate, or a cubic metal oxide material selected from the group consisting of rare earth zirconates and rare earth hafnates upon the layer of an IBAD oriented material. Such articles can further include thin films of high temperature superconductive oxides such as YBCO upon the layer of barium-containing material selected from the group consisting of barium zirconate, barium hafnate, barium titanate, barium strontium titanate, barium dysprosium zirconate, barium neodymium zirconate and barium samarium zirconate, or a cubic metal oxide material selected from the group consisting of rare earth zirconates and rare earth hafnates.

Conflicting stories about public scientific controversies: Effects of news convergence and divergence on scientists' credibility.

PubMed

Jensen, Jakob D; Hurley, Ryan J

2012-08-01

Surveys suggest that approximately one third of news consumers have encountered conflicting reports of the same information. News coverage of science is especially prone to conflict, but how news consumers perceive this situation is currently unknown. College students (N = 242) participated in a lab experiment where they were exposed to news coverage about one of two scientific controversies in the United States: dioxin in sewage sludge or the reintroduction of gray wolves to populated areas. Participants received (a) one news article (control), (b) two news articles that were consistent (convergent), or (c) two news articles that conflicted (divergent). The effects of divergence induced uncertainty differed by news story. Greater uncertainty was associated with increased scientists' credibility ratings for those reading dioxin regulation articles and decreased scientists' credibility ratings for those reading wolf reintroduction articles. Unlike other manifestations of uncertainty in scientific discourse, conflicting stories seem to generate effects that vary significantly by topic. Consistent with uncertainty management theory, uncertainty is embraced or rejected by situation.

Physical activity and cognitive-health content in top-circulating magazines, 2006-2008.

PubMed

Price, Anna E; Corwin, Sara J; Friedman, Daniela B; Laditka, Sarah B; Colabianchi, Natalie; Montgomery, Kara M

2011-04-01

Physical activity may promote cognitive health in older adults. Popular media play an important role in preventive health communication. This study examined articles discussing associations between physical activity and cognitive health in top-circulating magazines targeting older adults. 42,753 pages of magazines published from 2006 to 2008 were reviewed; 26 articles met inclusion criteria. Explanations regarding the link between physical activity and cognitive health were provided in 57.7% of articles. These explanations were generally consistent with empirical evidence; however, few articles included empirical evidence. Physical activity recommendations were presented in 80.8% of articles; a wide range was recommended (90-300 min of physical activity per wk). Socioeconomic status and education level were not mentioned in the text. Results suggest an opportunity for greater coverage regarding the role of physical activity in promoting cognitive health in popular media. Magazine content would benefit from including more empirical evidence, culturally sensitive content, and physical activity recommendations that are consistent with U.S. guidelines.

Edgewise Compression Testing of STIPS-0 (Structurally Integrated Thermal Protection System)

NASA Technical Reports Server (NTRS)

Brewer, Amy R.

2011-01-01

The Structurally Integrated Thermal Protection System (SITPS) task was initiated by the NASA Hypersonics Project under the Fundamental Aeronautics Program to develop a structural load-carrying thermal protection system for use in aerospace applications. The initial NASA concept for SITPS consists of high-temperature composite facesheets (outer and inner mold lines) with a light-weight insulated structural core. An edgewise compression test was performed on the SITPS-0 test article at room temperature using conventional instrumentation and methods in order to obtain panel-level mechanical properties and behavior of the panel. Three compression loadings (10, 20 and 37 kips) were applied to the SITPS-0 panel. The panel behavior was monitored using standard techniques and non-destructive evaluation methods such as photogrammetry and acoustic emission. The elastic modulus of the SITPS-0 panel was determined to be 1.146x106 psi with a proportional limit at 1039 psi. Barrel-shaped bending of the panel and partial delamination of the IML occurred under the final loading.

Development of early numerical abilities of Spanish-speaking Mexican preschoolers: A new assessment tool.

PubMed

Beltrán-Navarro, Beatriz; Abreu-Mendoza, Roberto A; Matute, Esmeralda; Rosselli, Monica

2018-01-01

This article presents a tool for assessing the early numerical abilities of Spanish-speaking Mexican preschoolers. The Numerical Abilities Test, from the Evaluación Neuropsicológica Infantil-Preescolar (ENI-P), evaluates four core abilities of number development: magnitude comparison, counting, subitizing, and basic calculation. We evaluated 307 Spanish-speaking Mexican children aged 2 years 6 months to 4 years 11 months. Appropriate internal consistency and test-retest reliability were demonstrated. We also investigated the effect of age, children's school attendance, maternal education, and sex on children's numerical scores. The results showed that the four subtests captured development across ages. Critically, maternal education had an impact on children's performance in three out of the four subtests, but there was no effect associated with children's school attendance or sex. These results suggest that the Numerical Abilities Test is a reliable instrument for Spanish-speaking preschoolers. We discuss the implications of our outcomes for numerical development.

Swine Flu -A Comprehensive View

NASA Astrophysics Data System (ADS)

Singh, Vandana; Sood, Meenakshi

2012-07-01

The present article is aimed on comprehensive view of Swine flu. It was first isolated from pigs in 1930 in USA. Pandemic caused by H1N1 in 2009 brought it in limelight. Itís a viral respiratory disease caused by viruses that infects pigs, resulting in nasal secretions, barking cough, decreased appetite, and listless behavior. Swine virus consist of eight RNA strands, one strand derived from human flu strains, two from avian (bird) strains, and five from swine strains. Swine flu spreads from infected person to healthy person by inhalation or ingestion of droplets contaminated with virus while sneezing or coughing. Two antiviral agents have been reported to help prevent or reduce the effects of swine flu, flu shot and nasal spray. WHO recommended for pandemic period to prevent its future outbreaks through vaccines or non-vaccines means. Antiviral drugs effective against this virus are Tamiflu and Relenza. Rapid antigen testing (RIDT), DFA testing, viral culture, and molecular testing (RT-PCR) are used for its diagnosis in laboratory

Characteristics of quantitative nursing research from 1990 to 2010.

PubMed

Yarcheski, Adela; Mahon, Noreen E

2013-12-01

To assess author credentials of quantitative research in nursing, the composition of the research teams, and the disciplinary focus of the theories tested. Nursing Research, Western Journal of Nursing Research, and Journal of Advanced Nursing were selected for this descriptive study; 1990, 1995, 2000, 2005, and 2010 were included. The final sample consisted of 484 quantitative research articles. From 1990 to 2010, there was an increase in first authors holding doctoral degrees, research from other countries, and funding. Solo authorship decreased; multi-authorship and multidisciplinary teams increased. Theories tested were mostly from psychology; the testing of nursing theory was modest. Multidisciplinary research far outdistanced interdisciplinary research. Quantitative nursing research can be characterized as multidisciplinary (distinct theories from different disciplines) rather than discipline-specific to nursing. Interdisciplinary (theories synthesized from different disciplines) research has been conducted minimally. This study provides information about the growth of the scientific knowledge base of nursing, which has implications for practice. © 2013 Sigma Theta Tau International.

Fitness to stand trial, human rights and possibilities from England and Wales.

PubMed

Stewart, Jeanette; Woodward, Mary; Hepner, Flana

2015-06-01

The capacity of individuals with disability, including cognitive or mental health impairments, to access justice on an equal basis has been considered recently in several Australian jurisdictions. Impairments can render individuals vulnerable in the legal system, affecting their reliability as a witness or their fitness to be tried, especially when limited support is available to help these individuals meet the test and criteria for fitness to stand trial. This article considers the situation in Australia in light of human rights perspectives and compares it with the England and Wales approach where special support measures have been introduced to help individuals access justice. The article recommends that better support measures be introduced in Australia that would be consistent with a human rights framework calling for support to enable individuals with disability to access justice. In particular, the introduction of intermediaries, as used in England and Wales, would go some way towards helping vulnerable individuals to access justice.

Craniofacial bone abnormalities and malocclusion in individuals with sickle cell anemia: a critical review of the literature

PubMed Central

Costa, Cyrene Piazera Silva; de Carvalho, Halinna Larissa Cruz Correia; Thomaz, Erika Bárbara Abreu Fonseca; Sousa, Soraia de Fátima Carvalho

2012-01-01

This study aims to critically review the literature in respect to craniofacial bone abnormalities and malocclusion in sickle cell anemia individuals. The Bireme and Pubmed electronic databases were searched using the following keywords: malocclusion, maxillofacial abnormalities, and Angle Class I, Class II and lass III malocclusions combined with sickle cell anemia. The search was limited to publications in English, Spanish or Portuguese with review articles and clinical cases being excluded from this study. Ten scientific publications were identified, of which three were not included as they were review articles. There was a consistent observation of orthodontic and orthopedic variations associated with sickle cell anemia, especially maxillary protrusions. However, convenience sampling, sometimes without any control group, and the lack of estimates of association and hypotheses testing undermined the possibility of causal inferences. It was concluded that despite the high frequency of craniofacial bone abnormalities and malocclusion among patients with sickle cell anemia, there is insufficient scientific proof that this disease causes malocclusion PMID:23049386

Solid state fermentation of Trichoderma viride for enhancement phenolic content, antioxidant and antimicrobial activities in ginger.

PubMed

Saleh, Rashad M; Kabli, Saleh A; Al-Garni, Saleh M; Al-Ghamdi, Maryam A; Abdel-Aty, Azza M; Mohamed, Saleh A

2018-05-04

The phenolic content of methanolic and water extracts of ginger fermented by Trichoderma spp. during solid state fermentation (SSF) was detected as compared with unfermented ginger. The total phenolic content of fermented ginger increased several times. The highest phenolic content of ginger was detected after SSF by T. viride. The optimal physiological conditions for the maximum production of the phenolic content and β-glucosidase activity of fermented ginger by T. viride were detected at day 7 incubation, pH 6.0, 30°C and 30% moisture. There are consistent between the maximum production of β-glucosidase and phenolic content. The SSF of ginger by T. viride greatly enhanced the antioxidant potency of phenolic compounds by using DPPH and ABTS assays. Potent antibacterial activity was appeared by phenolic compounds of fermented ginger against all the tested human-pathogenic bacteria. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Improving Test-Taking Performance of Secondary At-Risk Youth and Students with Disabilities

ERIC Educational Resources Information Center

Banks, Tachelle; Eaton, India

2014-01-01

Preparing at-risk youth and students with mild disabilities for state and district tests is important for improving their test performance, and basic instruction in test preparation can significantly improve student test performance. The article defines noncognitive variables that adversely affect test-taker performance. The article also describes…

A microfluidic glucose sensor incorporating a novel thread-based electrode system.

PubMed

Gaines, Michelle; Gonzalez-Guerrero, Maria Jose; Uchida, Kathryn; Gomez, Frank A

2018-05-01

An electrochemical sensor for the detection of glucose using thread-based electrodes and fabric is described. This device is relatively simple to fabricate and can be used for multiple readings after washing with ethanol. The fabrication of the chip consisted of two steps. First, three thread-based electrodes (reference, working, and counter) were fabricated by painting pieces of nylon thread with either layered silver ink and carbon ink or silver/silver chloride ink. The threads were then woven into a fabric chip with a beeswax barrier molded around the edges in order to prevent leaks from the tested solutions. A thread-based working electrode consisting of one layer of silver underneath two layers of carbon was selected to fabricate the final sensor system. Using the chip, a PBS solution containing glucose oxidase (GOx) (10 mg/mL), potassium ferricyanide (K 3 [Fe(CN) 6 ]) (10 mg/mL) as mediator, and different concentrations of glucose (0-25 mM), was measured by cyclic voltammetry (CV). It was found that the current output from the oxidation of glucose was proportional to the glucose concentrations. This thread-based electrode system is a viable sensor platform for detecting glucose in the physiological range. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

How theory is used and articulated in qualitative research: development of a new typology.

PubMed

Bradbury-Jones, Caroline; Taylor, Julie; Herber, Oliver

2014-11-01

There is a long tradition within qualitative research of theory being central and of critical importance. Qualitative research theory often equates with the methodologies used but this is a complex relationship, plagued by lack of consensus among scholars regarding how theory and methodology are related. This article furthers the debates on how theories are used in qualitative research, how they might influence a study and how they are articulated in publications. The aim is to provide a framework through which the relationship between theory and qualitative research can be understood. We propose a five-point typology on the levels of theoretical visibility, testing this against a range of published research from five key international health, medicine and social science journals. The typology captures a range of visibility--from seemingly absent through to highly visible and applied throughout. There was a clear gradient in this assessment--only a minority appeared to use theory consistently throughout a study. We outline several challenges to consistently applying theory in qualitative research and suggest potential solutions. This article is based on the argument that lack of theory in qualitative research undermines its quality. The typology is offered to assist researchers in applying theory in their own research and critiquing its use in the work of others. Copyright © 2014 Elsevier Ltd. All rights reserved.

The GRACE checklist for rating the quality of observational studies of comparative effectiveness: a tale of hope and caution.

PubMed

Dreyer, Nancy A; Velentgas, Priscilla; Westrich, Kimberly; Dubois, Robert

2014-03-01

While there is growing demand for information about comparative effectiveness (CE), there is substantial debate about whether and when observational studies have sufficient quality to support decision making. To develop and test an item checklist that can be used to qualify those observational CE studies sufficiently rigorous in design and execution to contribute meaningfully to the evidence base for decision support. An 11-item checklist about data and methods (the GRACE checklist) was developed through literature review and consultation with experts from professional societies, payer groups, the private sector, and academia. Since no single gold standard exists for validation, checklist item responses were compared with 3 different types of external quality ratings (N=88 articles). The articles compared treatment effectiveness and/or safety of drugs, medical devices, and medical procedures. We validated checklist item responses 3 ways against external quality ratings, using published articles of observational CE or safety studies: (a) Systematic Review-quality assessment from a published systematic review; (b) Single Expert Review-quality assessment made according to the solicited "expert opinion" of a senior researcher; and (c) Concordant Expert Review-quality assessments from 2 experts for which there was concordance. Volunteers (N=113) from 5 continents completed 280 article assessments using the checklist. Positive and negative predictive values (PPV, NPV, respectively) of individual items were estimated to compare testers' assessments with those of experts. Taken as a whole, the scale had better NPV than PPV, for both data and methods. The most consistent predictor of quality relates to the validity of the primary outcomes measurement for the study purpose. Other consistent markers of quality relate to using concurrent comparators, minimizing the effects of bias by prudent choice of covariates, and using sensitivity analysis to test robustness of results. Concordance of expert opinion on the quality of the rated articles was 52%; most checklist items performed better. The 11-item GRACE checklist provides guidance to help determine which observational studies of CE have used strong scientific methods and good data that are fit for purpose and merit consideration for decision making. The checklist contains a parsimonious set of elements that can be objectively assessed in published studies, and user testing shows that it can be successfully applied to studies of drugs, medical devices, and clinical and surgical interventions. Although no scoring is provided, study reports that rate relatively well across checklist items merit in-depth examination to understand applicability, effect size, and likelihood of residual bias. The current testing and validation efforts did not achieve clear discrimination between studies fit for purpose and those not, but we have identified a critical, though remediable, limitation in our approach. Not specifying a specific granular decision for evaluation, or not identifying a single study objective in reports that included more than one, left reviewers with too broad an assessment challenge. We believe that future efforts will be more successful if reviewers are asked to focus on a specific objective or question. Despite the challenges encountered in this testing, an agreed upon set of assessment elements, checklists, or score cards is critical for the maturation of this field. Substantial resources will be expended on studies of real-world effectiveness, and if the rigor of these observational assessments cannot be assessed, then the impact of the studies will be suboptimal. Similarly, agreement on key elements of quality will ensure that budgets are appropriately directed toward those elements. Given the importance of this task and the lessons learned from these extensive efforts at validation and user testing, we are optimistic about the potential for improved assessments that can be used for diverse situations by people with a wide range of experience and training. Future testing would benefit by directing reviewers to address a single, granular research question, which would avoid problems that arose by using the checklist to evaluate multiple objectives, by using other types of validation test sets, and by employing further multivariate analysis to see if any combination or sequence of item responses has particularly high predictive validity.

How Reliable Is Laboratory Testing?

MedlinePlus

... laboratory testing. (See Who's Who in the Lab .) Post-Analytic Activities After the test is completed, the result must be delivered in ... View Sources NOTE: This article is based on research that ... of the Lab Tests Online Editorial Review Board . This article is periodically ...

Detecting experimental techniques and selecting relevant documents for protein-protein interactions from biomedical literature.

PubMed

Wang, Xinglong; Rak, Rafal; Restificar, Angelo; Nobata, Chikashi; Rupp, C J; Batista-Navarro, Riza Theresa B; Nawaz, Raheel; Ananiadou, Sophia

2011-10-03

The selection of relevant articles for curation, and linking those articles to experimental techniques confirming the findings became one of the primary subjects of the recent BioCreative III contest. The contest's Protein-Protein Interaction (PPI) task consisted of two sub-tasks: Article Classification Task (ACT) and Interaction Method Task (IMT). ACT aimed to automatically select relevant documents for PPI curation, whereas the goal of IMT was to recognise the methods used in experiments for identifying the interactions in full-text articles. We proposed and compared several classification-based methods for both tasks, employing rich contextual features as well as features extracted from external knowledge sources. For IMT, a new method that classifies pair-wise relations between every text phrase and candidate interaction method obtained promising results with an F1 score of 64.49%, as tested on the task's development dataset. We also explored ways to combine this new approach and more conventional, multi-label document classification methods. For ACT, our classifiers exploited automatically detected named entities and other linguistic information. The evaluation results on the BioCreative III PPI test datasets showed that our systems were very competitive: one of our IMT methods yielded the best performance among all participants, as measured by F1 score, Matthew's Correlation Coefficient and AUC iP/R; whereas for ACT, our best classifier was ranked second as measured by AUC iP/R, and also competitive according to other metrics. Our novel approach that converts the multi-class, multi-label classification problem to a binary classification problem showed much promise in IMT. Nevertheless, on the test dataset the best performance was achieved by taking the union of the output of this method and that of a multi-class, multi-label document classifier, which indicates that the two types of systems complement each other in terms of recall. For ACT, our system exploited a rich set of features and also obtained encouraging results. We examined the features with respect to their contributions to the classification results, and concluded that contextual words surrounding named entities, as well as the MeSH headings associated with the documents were among the main contributors to the performance.

MMPI-2 characteristics of the Old Order Amish: a comparison of clinical, nonclinical, and United States normative samples.

PubMed

Knabb, Joshua J; Vogt, Ronald G; Newgren, Kevin P

2011-12-01

[Correction Notice: An erratum for this article was reported in Vol 23(4) of Psychological Assessment (see record 2011-12640-001). The article contains an error under the Participants and Procedure heading. This is addressed in the correction.] In the current study, we investigated Minnesota Multiphasic Personality Inventory-2 (MMPI-2) characteristics in an Old Order Amish nonclinical sample (N = 84), comparing these data with both the United States normative sample (N = 2,600) and a sample of Old Order Amish outpatients (N = 136). Consistent with our hypothesis, the Old Order Amish nonclinical group scored similarly to the United States normative sample and lower than the Old Order Amish outpatients on most scales. Thus, overall, the MMPI-2 appears to be sensitive to psychopathology, especially depression and psychosis, among Old Order Amish test takers. Still, several Validity, Clinical, Supplementary, Content, and Personality Psychopathology Five (PSY-5) scale score differences materialized between the Old Order Amish nonclinical group and the United States group, suggesting that certain MMPI-2 scales may need to be interpreted differently for Old Order Amish test takers. Further MMPI-2 research is needed with the Old Order Amish to replicate and generalize our findings. (PsycINFO Database Record (c) 2011 APA, all rights reserved).

Selection for associative learning of colour stimuli reveals correlated evolution of this learning ability across multiple stimuli and rewards.

PubMed

Liefting, Maartje; Hoedjes, Katja M; Lann, Cécile Le; Smid, Hans M; Ellers, Jacintha

2018-05-16

We are only starting to understand how variation in cognitive ability can result from local adaptations to environmental conditions. A major question in this regard is to what extent selection on cognitive ability in a specific context affects that ability in general through correlated evolution. To address this question we performed artificial selection on visual associative learning in female Nasonia vitripennis wasps. Using appetitive conditioning in which a visual stimulus was offered in association with a host reward, the ability to learn visual associations was enhanced within 10 generations of selection. To test for correlated evolution affecting this form of learning, the ability to readily form learned associations in females was also tested using an olfactory instead of a visual stimulus in the appetitive conditioning. Additionally, we assessed whether the improved associative learning ability was expressed across sexes by colour-conditioning males with a mating reward. Both females and males from the selected lines consistently demonstrated an increased associative learning ability compared to the control lines, independent of learning context or conditioned stimulus. No difference in relative volume of brain neuropils was detected between the selected and control lines. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Nonparametric analysis of bivariate gap time with competing risks.

PubMed

Huang, Chiung-Yu; Wang, Chenguang; Wang, Mei-Cheng

2016-09-01

This article considers nonparametric methods for studying recurrent disease and death with competing risks. We first point out that comparisons based on the well-known cumulative incidence function can be confounded by different prevalence rates of the competing events, and that comparisons of the conditional distribution of the survival time given the failure event type are more relevant for investigating the prognosis of different patterns of recurrence disease. We then propose nonparametric estimators for the conditional cumulative incidence function as well as the conditional bivariate cumulative incidence function for the bivariate gap times, that is, the time to disease recurrence and the residual lifetime after recurrence. To quantify the association between the two gap times in the competing risks setting, a modified Kendall's tau statistic is proposed. The proposed estimators for the conditional bivariate cumulative incidence distribution and the association measure account for the induced dependent censoring for the second gap time. Uniform consistency and weak convergence of the proposed estimators are established. Hypothesis testing procedures for two-sample comparisons are discussed. Numerical simulation studies with practical sample sizes are conducted to evaluate the performance of the proposed nonparametric estimators and tests. An application to data from a pancreatic cancer study is presented to illustrate the methods developed in this article. © 2016, The International Biometric Society.

Linguistic validation and reliability properties are weak investigated of most dementia-specific quality of life measurements-a systematic review.

PubMed

Dichter, Martin Nikolaus; Schwab, Christian G G; Meyer, Gabriele; Bartholomeyczik, Sabine; Halek, Margareta

2016-02-01

For people with dementia, the concept of quality of life (Qol) reflects the disease's impact on the whole person. Thus, Qol is an increasingly used outcome measure in dementia research. This systematic review was performed to identify available dementia-specific Qol measurements and to assess the quality of linguistic validations and reliability studies of these measurements (PROSPERO 2013: CRD42014008725). The MEDLINE, CINAHL, EMBASE, PsycINFO, and Cochrane Methodology Register databases were systematically searched without any date restrictions. Forward and backward citation tracking were performed on the basis of selected articles. A total of 70 articles addressing 19 dementia-specific Qol measurements were identified; nine measurements were adapted to nonorigin countries. The quality of the linguistic validations varied from insufficient to good. Internal consistency was the most frequently tested reliability property. Most of the reliability studies lacked internal validity. Qol measurements for dementia are insufficiently linguistic validated and not well tested for reliability. None of the identified measurements can be recommended without further research. The application of international guidelines and quality criteria is strongly recommended for the performance of linguistic validations and reliability studies of dementia-specific Qol measurements. Copyright © 2016 Elsevier Inc. All rights reserved.

Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

NASA Image and Video Library

2017-04-25

A view from inside NASA's Super Guppy aircraft at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, as the Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, is loaded into the aircraft. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

The factorial structure of job-related affective well-being: Polish adaptation of the Warr's measure.

PubMed

Mielniczuk, Emilia; Łaguna, Mariola

2018-02-16

The first aim of the study reported in this article was to test the factorial structure of job-related affect in a Polish sample. The second aim was to develop the Polish adaptation of the Warr's job-related affective well-being measure published in 1990, which is designed to assess 4 types of affect at work: anxiety, comfort, depression, enthusiasm. A longitudinal study design with 2 measurement times was used for verifying the psychometric properties of the Polish version of the measure. The final sample consisted of 254 Polish employees from different professions. Participants were asked to fill in a set of questionnaires consisting of measures capturing job-related affective well-being, mood, and turnover intention. The first step of analysis was to test the theoretically-based structure of the job-related affective well-being measure in a Polish sample. The confirmatory factor analysis revealed that a 4-factor model best describes the structure of the measure in comparison to 5 alternative models. Next, reliability of this measure was assessed. All scales achieved good internal consistency and acceptable test-retest reliability after 2 weeks. Finally, the convergent and discriminant validity as well as the criterion and predictive validity of all job-related affective well-being scales was confirmed, based on correlations between job-related affect and mood as well as turnover intention. The results suggest that the Polish adaptation of Warr's job-related affective well-being measure can be used by scientists as well as by practitioners who aim at assessing 4 types of affective well-being at a work context. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

A Testlet Assembly Design for Adaptive Multistage Tests

ERIC Educational Resources Information Center

Luecht, Richard; Brumfield, Terry; Breithaupt, Krista

2006-01-01

This article describes multistage tests and some practical test development considerations related to the design and implementation of a multistage test, using the Uniform CPA (certified public accountant) Examination as a case study. The article further discusses the use of automated test assembly procedures in an operational context to produce…

Regulatory Forum opinion piece: New testing paradigms for reproductive and developmental toxicity--the NTP modified one generation study and OECD 443.

PubMed

Foster, Paul M D

2014-12-01

The National Toxicology Program (NTP) has developed a new flexible study design, termed the modified one generation (MOG) reproduction study. The MOG study will encompass measurements of developmental and reproductive toxicity parameters as well as enable the setting of appropriate dose levels for a cancer bioassay through evaluation of target organ toxicity that is based on test article exposure that starts during gestation. This study design is compared and contrasted with the new Organization for Economic Co-operation and Development (OECD) 443 test guideline, the extended one generation reproduction study. The MOG study has a number of advantages, with a focus on F 1 animals, the generation of adequately powered, robust data sets that include both pre and postnatal developmental toxicity information, and the measurement of effects on reproductive structure and function in the same animals. This new study design does not employ the use of internal triggers in the design structure for the use of animals already on test and is also consistent with the principles of the 3R's. © 2014 by The Author(s).

Modeling and Simulation of the Second-Generation Orion Crew Module Air Bag Landing System

NASA Technical Reports Server (NTRS)

Timmers, Richard B.; Welch, Joseph V.; Hardy, Robin C.

2009-01-01

Air bags were evaluated as the landing attenuation system for earth landing of the Orion Crew Module (CM). An important element of the air bag system design process is proper modeling of the proposed configuration to determine if the resulting performance meets requirements. Analysis conducted to date shows that airbags are capable of providing a graceful landing of the CM in nominal and off-nominal conditions such as parachute failure, high horizontal winds, and unfavorable vehicle/ground angle combinations. The efforts presented here surround a second generation of the airbag design developed by ILC Dover, and is based on previous design, analysis, and testing efforts. In order to fully evaluate the second generation air bag design and correlate the dynamic simulations, a series of drop tests were carried out at NASA Langley's Landing and Impact Research (LandIR) facility. The tests consisted of a full-scale set of air bags attached to a full-scale test article representing the Orion Crew Module. The techniques used to collect experimental data, construct the simulations, and make comparisons to experimental data are discussed.

Development of dapivirine vaginal ring for HIV prevention.

PubMed

Devlin, Bríd; Nuttall, Jeremy; Wilder, Susan; Woodsong, Cynthia; Rosenberg, Zeda

2013-12-01

In the continuing effort to develop effective HIV prevention methods for women, a vaginal ring containing the non-nucleoside reverse transcriptase inhibitor dapivirine is currently being tested in two safety and efficacy trials. This paper reviews dapivirine ring's pipeline development process, including efforts to determine safe and effective dosing levels as well as identify delivery platforms with the greatest likelihood of success for correct and consistent use. Dapivirine gel and other formulations were developed and tested in preclinical and clinical studies. Multiple vaginal ring prototypes were also tested, resulting in the current ring design as well as additional designs under consideration for future testing. Efficacy results from clinical trials are expected in 2015. Through ongoing consultations with national regulatory authorities, licensure requirements for dapivirine vaginal ring approval have been defined. This article is based on a presentation at the "Product Development Workshop 2013: HIV and Multipurpose Prevention Technologies," held in Arlington, Virginia on February 21-22, 2013. It forms part of a special supplement to Antiviral Research. Copyright © 2013 Elsevier B.V. All rights reserved.

SLS Engine Section Test Article Moves From NASA Barge Pegasus To Test Stand at NASA’s Marshall Space Flight Center

NASA Image and Video Library

2017-05-18

The NASA barge Pegasus made its first trip to NASA’s Marshall Space Flight Center in Huntsville, Alabama on May 15. It arrived carrying the first piece of Space Launch System hardware built at NASA's Michoud Assembly Facility in New Orleans. The barge left Michoud on April 28 with the core stage engine section test article, traveling 1,240 miles by river to Marshall. The rocket's engine section is the bottom of the core stage and houses the four RS-25 engines. The engine section test article was moved from the barge to Marshall’s Building 4619 where it will be tested. The bottom part of the test article is structurally the same as the engine section that will be flown as part of the SLS core stage. The shiny metal top part simulates the rocket's liquid hydrogen tank, which is the fuel tank that joins to the engine section. The test article will endure tests that pull, push, and bend it, subjecting it to millions of pounds of force. This ensures the structure can withstand the incredible stresses produced by the 8.8 million pounds of thrust during launch and ascent.

Fate of abstracts presented at a National Turkish Orthopedics and Traumatology Congress: publication rates and consistency of abstracts compared with their subsequent full-text publications.

PubMed

Yalçınkaya, Merter; Bagatur, Erdem

2013-01-01

The aim of this study was to evaluate the publication rates of full-text articles after presentation of abstracts at a Turkish National Orthopaedics and Traumatology Congress, determine the time lag from the congress date to publication of full-text articles and assess the consistency between abstracts and the subsequent publications. All abstracts from the scientific program of the 20th Turkish National Orthopaedics and Traumatology Congress (2007) were identified and computerized PubMed searches were conducted to determine whether an abstract had been followed by publication of a full-text article and key features were compared to evaluate their consistency. The time lag to publication and the impact factors of the journals where the articles were published were noted. Of the 770 abstracts (264 oral, 506 poster presentations), 227 (29.5%) were followed by a full-text and 116 (44%) of the 264 oral and 111 (22%) of the 506 poster presentations were published. The mean time to publication was 14.9±16.075 (range: 33 to 55) months. Thirty-three (14.5%) were published prior to the presentation at the congress. The likelihood of publication decreased after the third year (26 of 227, 11.5%). A total of 182 (80.2%) articles showed inconsistencies with the abstract; 74 (32.6%) minor, 14 (6.2%) major, and 94 (41.4%) minor and major inconsistencies. The mean impact factor of the journals was 1.152±0.858. The vast majority of abstracts presented at this congress were not followed by publication of a full-text article. Additionally, frequent inconsistencies between the final published article and the original abstract indicated the inadequacy of quality of reporting in abstracts.

The role of mutation analysis of the APC gene in the management of FAP patients. A controversial issue.

PubMed

Dodaro, Concetta; Grifasi, Carlo; Florio, Jole; Santangelo, Michele L; Duraturo, Francesca; De Rosa, Marina; Izzo, Paola; Renda, Andrea

A correlation between the location of mutation in the adenomatous polyposis coli (APC) gene and clinical manifestations of familial adenomatous polyposis (FAP) has repeatedly been reported. Some Authors suggest the use of mutational analysis as a guide to select the best surgical option in FAP patients. However, data coming from studies on large series have raised questions on this issue. The aim of this study is to discuss the role of the genetic tests in the management of FAP. A literature review was performed considering only peer-reviewed articles published between 1991-2015. All the studies examined the role of genetic as a guide for surgical management of FAP. Of 363 articles identified, 21 were selected for full-text review. We found different positions with regard the use of genetic tests to determine surgical management of FAP. In particular, while consistent correlations between the APC mutation site and FAP phenotype were observed in large series, 8 studies reported a wide variation of genotypephenotype correlation in patients with the same mutation and they recommended that decisions regarding surgical strategy should be based not only on genotype but also on the clinical factors and the will of the patient who must be fully informed. The decision on the type and the timing of surgery should be based on the assessment of many factors and genotype assessment should be used in combination with clinical data. Disease severity, Familial adenomatous polyposis, Genetic tests, Genotype-phenotype correlations, Surgical management.

Using Cooperative Learning to Teach via Text Types

ERIC Educational Resources Information Center

Jacobs, George M.; Yong, Seah-Tay Hui

2004-01-01

This article offers ideas as to how students can collaborate as they learn about and utilize a variety of text types (also known as rhetorical modes). The article begins with explanations of the teaching of text types and cooperative learning. The longest section of the article consists of examples of ways that students can use cooperative…

Getting on the Conference Program and Writing a Practical Article: Templates for Success

ERIC Educational Resources Information Center

Jalongo, Mary Renck

2013-01-01

For many early childhood professionals, their initial foray into writing for publication consists of preparing a conference proposal for a workshop/training type of session and producing a manuscript suitable for publication as a practical article in a professional journal. The primary purpose of the article is to provide authors with templates,…

Is the admission test for a course in medicine a good predictor of academic performance? A case-control experience at the school of medicine of Turin.

PubMed

Migliaretti, Giuseppe; Bozzaro, Salvatore; Siliquini, Roberta; Stura, Ilaria; Costa, Giuseppe; Cavallo, Franco

2017-12-01

The usefulness of university admission tests to medical schools has been discussed in recent years. In the academic year 2014-15 in Italy, several students who failed the admission test appealed to the regional administrative court ('Tribunale Amministrativo Regionale'-TAR) requesting to be included, despite their test results, and all were admitted to their respective courses. The existence of this population of students generated a control group, in order to evaluate the predictive capacity of the admission test. The aim of the present work is to discuss the ability of university admission tests to predict subsequent academic success. The study involved 683 students who enrolled onto the first year of the degree course in medicine in the academic year 2014-15 at the University of Turin (Molinette and San Luigi Gonzaga colleges). The students were separated into two categories: those who passed the admission test (n1=531) and those who did not pass the admission test but won their appeal in the TAR (n2=152). The validity of the admission test was analysed using specificity, sensitivity, positive and negative likelihood ratios (LH+, LH-), receiver operating characteristic (ROC) curves, area under the ROC curve (AUC), and relative (95% CI). The results showed that the admission test appeared to be a good tool for predicting the academic performances in the first year of the course (AUC=0.70, 95% CI 0.64 to 0.76). Moreover, some subject areas seemed to have a greater discriminating capacity than others. In general, students who obtained a high score in scientific questions were more likely to obtain the required standards during the first year (LH+ 1.22, 95% CI 1.14 to 1.25). Based on a consistent statistical approach, our study seems to confirm the ability of the admission test to predict academic success in the first year at the school of medicine of Turin. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

HBV and HCV test uptake and correlates among men who have sex with men in China: a nationwide cross-sectional online survey.

PubMed

Fitzpatrick, Thomas; Pan, Stephen W; Tang, Weiming; Guo, Wilson; Tucker, Joseph D

2018-05-19

Hepatitis B virus (HBV) and hepatitis C virus (HCV) cause substantial morbidity and mortality in low-income and middle-income countries, including China. WHO guidelines recommend men who have sex with men (MSM) receive HBV and HCV screening. The purpose of this study was to determine the proportion of MSM in China who have HBV and HCV tested and identify correlates of test uptake. We conducted an online cross-sectional survey of young MSM in China. Respondents were asked to report previous HBV and HCV testing, sociodemographic information, sexual risk factors for hepatitis infection, other STI testing and primary care physician (PCP) status. Associations were analysed by logistic regression. 503 eligible MSM completed the survey. 41.0% (206/503) of MSM had HCV tested, and 38.2% (60/157) of MSM with no or uncertain HBV vaccination had HBV tested. In multivariate analysis, HCV testing was correlated with HBV testing (adjusted OR (aOR) 22.98, 95% CI 12.11 to 43.60), HIV testing (aOR 3.64, 95% CI 1.92 to 6.91), HIV-positive status (aOR 1.78, 95% CI 1.07 to 2.98) and having a PCP (aOR 2.40, 95% CI 1.44 to 3.98). Among MSM with no or uncertain HBV vaccination, HBV testing was correlated with HCV testing (aOR 80.85, 95% CI 20.80 to 314.33), HIV testing (aOR 5.26, 95% CI 1.81 to 15.28), HIV-positive status (aOR 3.00, 95% CI 1.22 to 7.37) and having a PCP (aOR 2.69, 95% CI 1.00 to 7.26). Our data suggest many young MSM in China have not received hepatitis testing. HCV testing rates were lower than those recently reported among MSM in Australia and the USA. The strong correlation between HBV and HCV testing suggests bundled testing interventions may be useful for MSM in China. Men with a PCP were more likely to have received hepatitis testing, consistent with literature demonstrating the importance of primary care in expanding access to testing. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

How Structure Shapes Dynamics: Knowledge Development in Wikipedia - A Network Multilevel Modeling Approach

PubMed Central

Halatchliyski, Iassen; Cress, Ulrike

2014-01-01

Using a longitudinal network analysis approach, we investigate the structural development of the knowledge base of Wikipedia in order to explain the appearance of new knowledge. The data consists of the articles in two adjacent knowledge domains: psychology and education. We analyze the development of networks of knowledge consisting of interlinked articles at seven snapshots from 2006 to 2012 with an interval of one year between them. Longitudinal data on the topological position of each article in the networks is used to model the appearance of new knowledge over time. Thus, the structural dimension of knowledge is related to its dynamics. Using multilevel modeling as well as eigenvector and betweenness measures, we explain the significance of pivotal articles that are either central within one of the knowledge domains or boundary-crossing between the two domains at a given point in time for the future development of new knowledge in the knowledge base. PMID:25365319

Biaxially textured articles formed by powder metallurgy

DOEpatents

Goyal, Amit; Williams, Robert K.

2001-01-01

A biaxially textured alloy article comprises Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacted and heat treated, then rapidly recrystallized to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

Measuring teacher self-report on classroom practices: Construct validity and reliability of the Classroom Strategies Scale-Teacher Form.

PubMed

Reddy, Linda A; Dudek, Christopher M; Fabiano, Gregory A; Peters, Stephanie

2015-12-01

This article presents information about the construct validity and reliability of a new teacher self-report measure of classroom instructional and behavioral practices (the Classroom Strategies Scales-Teacher Form; CSS-T). The theoretical underpinnings and empirical basis for the instructional and behavioral management scales are presented. Information is provided about the construct validity, internal consistency, test-retest reliability, and freedom from item-bias of the scales. Given previous investigations with the CSS Observer Form, it was hypothesized that internal consistency would be adequate and that confirmatory factor analyses (CFA) of CSS-T data from 293 classrooms would offer empirical support for the CSS-T's Total, Composite and subscales, and yield a similar factor structure to that of the CSS Observer Form. Goodness-of-fit indices of χ2/df, Root Mean Square Error of Approximation, Goodness of Fit Index, and Adjusted Goodness of Fit Index suggested satisfactory fit of proposed CFA models whereas the Comparative Fit Index did not. Internal consistency estimates of .93 and .94 were obtained for the Instructional Strategies and Behavioral Strategies Total scales respectively. Adequate test-retest reliability was found for instructional and behavioral total scales (r = .79, r = .84, percent agreement 93% and 93%). The CSS-T evidences freedom from item bias on important teacher demographics (age, educational degree, and years of teaching experience). Implications of results are discussed. (c) 2015 APA, all rights reserved).

Orion Crew Module Adapter-Structural Test Article and European S

NASA Image and Video Library

2017-05-09

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, operations are underway to lower the Orion crew module adapter structural test article onto the European Space Agency's service module structural test article. After the hardware is attached, the structure will be packed and shipped to Lockheed Martin's Denver facility to undergo testing. The Orion spacecraft will launch atop the agency's Space Launch System rocket on Exploration Mission-1 in 2019.

Orion Crew Module Structural Test Article Lift & Uncrating

NASA Image and Video Library

2016-11-15

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, the cover has been removed from the container holding the Orion crew module structural test article (STA). The STA arrived aboard NASA's Super Guppy aircraft at the Shuttle Landing Facility operated by Space Florida. The test article was moved inside the facility's high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion Crew Module Structural Test Article Offload

NASA Image and Video Library

2016-11-15

After arriving at the Shuttle Landing Facility operated by Space Florida at NASA's Kennedy Space Center in Florida, the agency's Super Guppy aircraft has been opened and the container holding the Orion crew module structural test article (STA) is being offloaded. The test article will be transported to the Neil Armstrong Operations and Checkout Building high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion Crew Module Structural Test Article Offload

NASA Image and Video Library

2016-11-15

NASA’s Super Guppy aircraft, carrying the Orion crew module structural test article, arrived at the Shuttle Landing Facility operated by Space Florida at NASA’s Kennedy Space Center in Florida. The unique aircraft has been opened to reveal the container holding the STA. The test article will be transported to the Neil Armstrong Operations and Checkout Building high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion Crew Module Structural Test Article Unbagging

NASA Image and Video Library

2016-11-15

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, Lockheed Martin technicians remove the protective covering from the Orion crew module structural test article (STA). The STA arrived aboard NASA's Super Guppy aircraft at the Shuttle Landing Facility operated by Space Florida. The test article was moved inside the facility's high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion Crew Module Structural Test Article Unbagging

NASA Image and Video Library

2016-11-15

Inside the Neil Armstrong Operations and Checkout Building high bay at NASA's Kennedy Space Center in Florida, the cover has been removed from the container holding the Orion crew module structural test article (STA). The STA arrived aboard NASA's Super Guppy aircraft at the Shuttle Landing Facility operated by Space Florida. The test article was moved inside the facility's high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion Crew Module Structural Test Article Offload

NASA Image and Video Library

2016-11-15

After arriving at the Shuttle Landing Facility operated by Space Florida at NASA's Kennedy Space Center in Florida, the agency's Super Guppy aircraft has been opened and the container holding the Orion crew module structural test article (STA) is being offloaded. The test article will be transported to the Neil Armstrong Operations and Checkout Building high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018. Photo credit: NASA/Ben Smegelsky

New Technique for Cryogenically Cooling Small Test Articles

NASA Technical Reports Server (NTRS)

Rodriquez, Karen M.; Henderson, Donald J.

2011-01-01

Convective heat removal techniques to rapidly cool small test articles to Earth-Moon L2 temperatures of 77 K were accomplished through the use of liquid nitrogen (LN2). By maintaining a selected pressure range on the saturation curve, test articles were cooled below the LN2 boiling point at ambient pressure in less than 30 min. Difficulties in achieving test pressures while maintaining the temperature tolerance necessitated a modification to the original system to include a closed loop conductive cold plate and cryogenic shroud

Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

NASA Image and Video Library

2017-04-25

The Orion Exploration Mission-1 (EM-1) structural test article, secured inside its transport container, is lifted up by crane from its transport vehicle at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida. The test article will be loaded into NASA's Super Guppy aircraft, in view at left, and transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

Orion Crew Module Structural Test Article Offload

NASA Image and Video Library

2016-11-15

NASA’s Super Guppy aircraft, carrying the Orion crew module structural test article (STA), arrived at the Shuttle Landing Facility operated by Space Florida at NASA’s Kennedy Space Center in Florida. The unique aircraft is being opened to offload the STA. The test article will be transported to the Neil Armstrong Operations and Checkout Building high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion Crew Module Structural Test Article Offload

NASA Image and Video Library

2016-11-15

After arriving at the Shuttle Landing Facility operated by Space Florida at NASA's Kennedy Space Center in Florida, the agency's Super Guppy aircraft was opened and the container holding the Orion crew module structural test article (STA) was offloaded. The test article will be transported to the Neil Armstrong Operations and Checkout Building high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion Crew Module Structural Test Article Offload

NASA Image and Video Library

2016-11-15

NASA’s Super Guppy aircraft, carrying the Orion crew module structural test article, arrived at the Shuttle Landing Facility operated by Space Florida at NASA’s Kennedy Space Center in Florida. The unique aircraft has been opened and the container holding the STA is being offloaded. The test article will be transported to the Neil Armstrong Operations and Checkout Building high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

Orion EM-1 Crew Module Structural Test Article loaded onto Guppy

NASA Image and Video Library

2017-04-25

On the tarmac at the Shuttle Landing Facility at NASA's Kennedy Space Center in Florida, NASA and contractor workers review procedures before beginning loading of the Orion Exploration Mission-1 (EM-1) structural test article in its transport container into NASA's Super Guppy aircraft. The test article will be transported to Lockheed Martin's Denver facility for testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission.

Orion Crew Module Structural Test Article Offload

NASA Image and Video Library

2016-11-15

NASA’s Super Guppy aircraft, carrying the Orion crew module structural test article (STA), arrived at the Shuttle Landing Facility operated by Space Florida at NASA’s Kennedy Space Center in Florida. The front of the unique aircraft is being opened to offload the STA. The test article will be transported to the Neil Armstrong Operations and Checkout Building high bay for further testing. The Orion spacecraft will launch atop NASA’s Space Launch System rocket on EM-1, its first deep space mission, in late 2018.

A systematic review of predictors and moderators of improvement in cognitive-behavioral therapy for panic disorder and agoraphobia.

PubMed

Porter, Eliora; Chambless, Dianne L

2015-12-01

Despite the considerable efficacy of cognitive-behavioral therapy (CBT) for panic disorder (PD) and agoraphobia, a substantial minority of patients fail to improve for reasons that are poorly understood. The aim of this study was to identify consistent predictors and moderators of improvement in CBT for PD and agoraphobia. A systematic review and meta-analysis of articles was conducted using PsycInfo and PubMed. Search terms included panic, agoraphobi*, cognitive behavio*, CBT, cognitive therapy, behavio* therapy, CT, BT, exposure, and cognitive restructuring. Studies were limited to those employing semi-structured diagnostic interviews and examining change on panic- or agoraphobia-specific measures. The first author extracted data on study characteristics, prediction analyses, effect sizes, and indicators of study quality. Interrater reliability was confirmed. 52 papers met inclusion criteria. Agoraphobic avoidance was the most consistent predictor of decreased improvement, followed by low expectancy for change, high levels of functional impairment, and Cluster C personality pathology. Other variables were consistently unrelated to improvement in CBT, understudied, or inconsistently related to improvement. Many studies were underpowered and failed to report effect sizes. Tests of moderation were rare. Apart from agoraphobic avoidance, few variables consistently predict improvement in CBT for PD and/or agoraphobia across studies. Copyright © 2015 Elsevier Ltd. All rights reserved.

A Diagnostic Approach for Rodent Progressive Cardiomyopathy and Like Lesions in Toxicology Studies up to 28 Days in the Sprague Dawley Rat (Part 2 of 2).

PubMed

Hailey, James R; Maleeff, Beverly E; Thomas, Heath C; Pearse, Gail; Klapwijk, Jan C; Cristofori, Patrizia G; Berridge, Brian; Kimbrough, Carie L; Parker, George A; Morton, Daniel; Elmore, Susan; Hardisty, Jerry F; Dybdal, Noel O; Rehagen, David A; Fikes, James D; Lamb, Martin; Biddle, Kathleen; Buetow, Bernard S; Carreira, Vinicius; Nyska, Abraham; Tripathi, Niraj K; Workman, Heather C; Bienvenu, Jean-Guy; Brees, Ingrid; Turk, James R; Adler, Rick R

2017-12-01

To test the diagnostic approach described in part 1 of this article, 2 exercises were completed by pathologists from multiple companies/agencies. Pathologist's examination of whole slide image (WSI) heart sections from rats using personal diagnostic approaches (exercise #1) corroborated conclusions from study #1. Using the diagnostic approach described in part 1, these pathologists examined the same WSI heart sections (exercise #2) to determine whether that approach increased consistency of diagnosis of rodent progressive cardiomyopathy (PCM) lesions. In exercise #2, there was improved consistency of categorization of small borderline morphologies and mild lesions, but a decrement in consistency of categorizing minimal lesions. Exercises 1 and 2 suggest the described diagnostic approach is representative of that in use by the majority of toxicologic pathologists across companies/agencies and that application by all may improve diagnostic consistency of PCM/like lesions. Additionally, a criterion of approximately 5% heart section involvement is suggested for separating mild from moderate or greater severity. While evidence is not absolute, until further investigation shows otherwise, microscopic changes resembling PCM, but located in the epicardial and subepicardial region of the right ventricle, may be considered as part of the spectrum of PCM.

Future Directions for Space Transportation and Propulsion at NASA

NASA Technical Reports Server (NTRS)

Sackheim, Robert L.

2005-01-01

Contents include the following: Oxygen Compatible Materials. Manufacturing Technology Demonstrations. Turbopump Inducer Waterflow Test. Turbine Damping "Whirligig" Test. Single Element Preburner and Main Injector Test. 40K Multi-Element Preburner and MI. Full-Scale Battleship Preburner. Prototype Preburner Test Article. Full-Scale Prototype TCA. Turbopump Hot-Fire Test Article. Prototype Engine. Validated Analytical Models.

Boeing CST-100 Heat Shield Testing

NASA Image and Video Library

2017-05-31

A heat shield is used during separation test activities with Boeing's Starliner structural test article. The test article is undergoing rigorous qualification testing at the company's Huntington Beach Facility in California. Boeing’s CST-100 Starliner will launch on the Atlas V rocket to the International Space Station as part of NASA’s Commercial Crew Program.

Likelihood Ratio Tests for Special Rasch Models

ERIC Educational Resources Information Center

Hessen, David J.

2010-01-01

In this article, a general class of special Rasch models for dichotomous item scores is considered. Although Andersen's likelihood ratio test can be used to test whether a Rasch model fits to the data, the test does not differentiate between special Rasch models. Therefore, in this article, new likelihood ratio tests are proposed for testing…

Time-Lapse Video of SLS Engine Section Test Article Being Stacked at Michoud

NASA Image and Video Library

2017-04-25

This time-lapse video shows the Space Launch System engine section structural qualification test article being stacked at NASA's Michoud Assembly Facility in New Orleans. The rocket's engine section is the bottom of the core stage and houses the four RS-25 engines. The engine section test article was moved to Michoud's Cell A in Building 110 for vertical stacking with hardware that simulates the rocket's liquid hydrogen tank, which is the fuel tank that joins to the engine section. Once stacked, the entire test article will load onto the barge Pegasus and ship to NASA's Marshall Space Flight Center in Huntsville, Alabama. There, it will be subjected to millions of pounds of force during testing to ensure the hardware can withstand the incredible stresses of launch.

SLS Engine Section Test Article Moved for Stacking at Michoud

NASA Image and Video Library

2017-04-25

Stacking is underway for the Space Launch System core stage engine section structural qualification test article at NASA's Michoud Assembly Facility in New Orleans. The rocket's engine section is the bottom of the core stage and houses the four RS-25 engines. The engine section test article was moved to Michoud's Cell A in Building 110 for vertical stacking with hardware that simulates the rocket's liquid hydrogen tank, which is the fuel tank that joins to the engine section. Once stacked, the entire test article will load onto the barge Pegasus and ship to NASA's Marshall Space Flight Center in Huntsville, Alabama. There, it will be subjected to millions of pounds of force during testing to ensure the hardware can withstand the incredible stresses of launch.

Trends in articles published over the past 20 years in the journal of chiropractic education: country of origin, academic affiliation, and data versus nondata studies.

PubMed

Johnson, Claire D; Green, Bart N

2008-01-01

To review trends in articles published during the first 20 years of The Journal of Chiropractic Education (JCE), which is the primary periodical that publishes chiropractic educational research. This study focused on article type, country of origin, contributions by institutions, use of references, and use of structured abstracts. All volumes of the JCE were retrieved (1987-2006). Only full articles were included in this study; abstracts from proceedings and ephemera were excluded from this analysis. Articles that presented no data (eg, commentary, narrative descriptions) were classified as nondata articles. Articles that reported data (eg, experimental studies, survey research, etc) were classified as data articles. Each article was reviewed by hand for the type of study (data vs nondata), geographic region of origin, college of origin, use of references, and the presence of a structured or unstructured abstract. After applying the inclusion and exclusion criteria, 153 papers were assessed. Published articles came from 5 countries and represented 23 chiropractic colleges. A majority (80.2%) of papers were from the United States. Of all articles, 101 articles (66%) were nondata in nature. Consistent use of references and structured abstracts increased over time. During its first 20 years, the JCE has published more nondata than data studies and the number of data papers published per year has remained constant. The journal has reached a consistent level of quality in its publication of manuscripts containing structured abstracts and references, and articles have been authored primarily by US authors. It is recommended that more efforts and resources are dedicated to data-driven studies and that greater geographic diversity is obtained to better represent the worldwide distribution of the chiropractic profession's educational institutions.

Evaluation of the Steris Sensitive Equipment Decontamination (SED) Apparatus on a 463L Pallet

DTIC Science & Technology

2007-09-01

to decontaminate representative articles of sensitive equipment and operationally relevant materials for biological-warfare agent surrogate... Articles of Sensitive Equipment .................................................................. 25 2.9 Sensitive Equipment Inspection...45 3.6.2 Test Article Initial Inspection .............................................................. 47 3.6.3 Test

NON-DESTRUCTIVE METHOD AND MEANS FOR FLAW DETECTION

DOEpatents

Hochschild, R.

1959-03-10

BS>An improved method is presented for the nondestructive detection of flaws in olectrictilly conductivc articles using magnetic field. According to thc method a homogoneous mignetic field is established in the test article;it right angle" to the artyicle. A probe is aligned with its axis transverse to the translates so hat th4 probe scans the surface of the test article while the axis of the robe is transverse to the direction of translation of the article. In this manner any output current obtained in thc probe is an indication of the size and location of a flaw in the article under test, with a miiiimum of signal pick- up in the probe from the established magnetic field.

Quality of reporting statistics in two Indian pharmacology journals.

PubMed

Jaykaran; Yadav, Preeti

2011-04-01

To evaluate the reporting of the statistical methods in articles published in two Indian pharmacology journals. All original articles published since 2002 were downloaded from the journals' (Indian Journal of Pharmacology (IJP) and Indian Journal of Physiology and Pharmacology (IJPP)) website. These articles were evaluated on the basis of appropriateness of descriptive statistics and inferential statistics. Descriptive statistics was evaluated on the basis of reporting of method of description and central tendencies. Inferential statistics was evaluated on the basis of fulfilling of assumption of statistical methods and appropriateness of statistical tests. Values are described as frequencies, percentage, and 95% confidence interval (CI) around the percentages. Inappropriate descriptive statistics was observed in 150 (78.1%, 95% CI 71.7-83.3%) articles. Most common reason for this inappropriate descriptive statistics was use of mean ± SEM at the place of "mean (SD)" or "mean ± SD." Most common statistical method used was one-way ANOVA (58.4%). Information regarding checking of assumption of statistical test was mentioned in only two articles. Inappropriate statistical test was observed in 61 (31.7%, 95% CI 25.6-38.6%) articles. Most common reason for inappropriate statistical test was the use of two group test for three or more groups. Articles published in two Indian pharmacology journals are not devoid of statistical errors.

[The development and implementation of polymerase chain reaction to detect in real-time operation mode yersinia pestis in field material].

PubMed

Afanas'ev, M V; Chipanin, E V; Shestakov, V E; Denisov, A V; Fomina, L A; Ostiak, A S; Balakhonov, S V

2013-03-01

The article presents the results of development and practical implementation of system of polymerase chain reaction testing in real-time operation mode to detect agent of plague infield material. In laboratory conditions the system demonstrated good results and hence it was applied in conditions of field laboratory of epidemiologic team during planned epizootologic examination of Gorno-Altaisk hot spot of plague. The sampling consisted of more than 1400 objects. It was demonstrated that high sensitivity and specificity is immanent to proposed system. The adaptation of the system to the real time amplifier "Smart Cycler" (Cephid, USA) having some specific technical characteristics makes it possible to consider the proposed test-system as an effective sensitive and precise instrument for screening studies in the process of regular epizootologic examinations of hot spots of plague.

Application of Classical Land Surveying Measurement Methods for Determining the Vertical Displacement of Railway Bridges

NASA Astrophysics Data System (ADS)

Gawronek, Pelagia; Makuch, Maria

2017-12-01

The classical measurements of stability of railway bridge, in the context of determining the vertical displacements of the object, consisted on precise leveling of girders and trigonometric leveling of controlled points (fixed into girders' surface). The construction elements, which were measured in two ways, in real terms belonged to the same vertical planes. Altitude measurements of construction were carried out during periodic structural stability tests and during static load tests of bridge by train. The specificity of displacement measurements, the type of measured object and the rail land surveying measurement conditions were determinants to define methodology of altitude measurement. The article presents compatibility of vertical displacements of steel railway bridge, which were developed in two measurement methods. In conclusion, the authors proposed the optimum concept of determining the vertical displacements of girders by using precise and trigonometric leveling (in terms of accuracy, safety and economy of measurement).

Cultural adaptation of preschool PATHS (Promoting Alternative Thinking Strategies) curriculum for Pakistani children.

PubMed

Inam, Ayesha; Tariq, Pervaiz N; Zaman, Sahira

2015-06-01

Cultural adaptation of evidence-based programmes has gained importance primarily owing to its perceived impact on the established effectiveness of a programme. To date, many researchers have proposed different frameworks for systematic adaptation process. This article presents the cultural adaptation of preschool Promoting Alternative Thinking Strategies (PATHS) curriculum for Pakistani children using the heuristic framework of adaptation (Barrera & Castro, 2006). The study was completed in four steps: information gathering, preliminary adaptation design, preliminary adaptation test and adaptation refinement. Feedbacks on programme content suggested universality of the core programme components. Suggested changes were mostly surface structure: language, presentation of materials, conceptual equivalence of concepts, training needs of implementation staff and frequency of programme delivery. In-depth analysis was done to acquire cultural equivalence. Pilot testing of the outcome measures showed strong internal consistency. The results were further discussed with reference to similar work undertaken in other cultures. © 2014 International Union of Psychological Science.

Thermoelectrical generator powered by human body

NASA Astrophysics Data System (ADS)

Almasyova, Zuzana; Vala, David; Slanina, Zdenek; Idzkowski, Adam

2017-08-01

This article deals with the possibility of using alternative energy sources for power of biomedical sensors with low power consumption, especially using the Peltier effect sources. Energy for powering of the target device has been used from the available renewable photovoltaic effect. The work is using of "energy harvesting" or "harvest energy" produced by autonomous generator harvesting accumulate energy. It allows to start working from 0.25 V. Measuring chain consists of further circuit which is a digital monitoring device for monitoring a voltage, current and power with I2C bus interface. Using the Peltier effect was first tested in a thermocontainer with water when the water heating occurred on the basis of different temperature differential between the cold and hot side of the Peltier element result in the production of energy. Realized prototype was also experimentally tested on human skin, specifically on the back, both in idle mode and under load.

Benchmark dataset for undirected and Mixed Capacitated Arc Routing Problems under Time restrictions with Intermediate Facilities.

PubMed

Willemse, Elias J; Joubert, Johan W

2016-09-01

In this article we present benchmark datasets for the Mixed Capacitated Arc Routing Problem under Time restrictions with Intermediate Facilities (MCARPTIF). The problem is a generalisation of the Capacitated Arc Routing Problem (CARP), and closely represents waste collection routing. Four different test sets are presented, each consisting of multiple instance files, and which can be used to benchmark different solution approaches for the MCARPTIF. An in-depth description of the datasets can be found in "Constructive heuristics for the Mixed Capacity Arc Routing Problem under Time Restrictions with Intermediate Facilities" (Willemseand Joubert, 2016) [2] and "Splitting procedures for the Mixed Capacitated Arc Routing Problem under Time restrictions with Intermediate Facilities" (Willemseand Joubert, in press) [4]. The datasets are publicly available from "Library of benchmark test sets for variants of the Capacitated Arc Routing Problem under Time restrictions with Intermediate Facilities" (Willemse and Joubert, 2016) [3].

Theoretical analysis of stack gas emission velocity measurement by optical scintillation

NASA Astrophysics Data System (ADS)

Yang, Yang; Dong, Feng-Zhong; Ni, Zhi-Bo; Pang, Tao; Zeng, Zong-Yong; Wu, Bian; Zhang, Zhi-Rong

2014-04-01

Theoretical analysis for an online measurement of the stack gas flow velocity based on the optical scintillation method with a structure of two parallel optical paths is performed. The causes of optical scintillation in a stack are first introduced. Then, the principle of flow velocity measurement and its mathematical expression based on cross correlation of the optical scintillation are presented. The field test results show that the flow velocity measured by the proposed technique in this article is consistent with the value tested by the Pitot tube. It verifies the effectiveness of this method. Finally, by use of the structure function of logarithmic light intensity fluctuations, the theoretical explanation of optical scintillation spectral characteristic in low frequency is given. The analysis of the optical scintillation spectrum provides the basis for the measurement of the stack gas flow velocity and particle concentration simultaneously.

International ring trial for the validation of an event-specific Golden Rice 2 quantitative real-time polymerase chain reaction method.

PubMed

Jacchia, Sara; Nardini, Elena; Bassani, Niccolò; Savini, Christian; Shim, Jung-Hyun; Trijatmiko, Kurniawan; Kreysa, Joachim; Mazzara, Marco

2015-05-27

This article describes the international validation of the quantitative real-time polymerase chain reaction (PCR) detection method for Golden Rice 2. The method consists of a taxon-specific assay amplifying a fragment of rice Phospholipase D α2 gene, and an event-specific assay designed on the 3' junction between transgenic insert and plant DNA. We validated the two assays independently, with absolute quantification, and in combination, with relative quantification, on DNA samples prepared in haploid genome equivalents. We assessed trueness, precision, efficiency, and linearity of the two assays, and the results demonstrate that both the assays independently assessed and the entire method fulfill European and international requirements for methods for genetically modified organism (GMO) testing, within the dynamic range tested. The homogeneity of the results of the collaborative trial between Europe and Asia is a good indicator of the robustness of the method.

SLS INTERTANK TEST ARTICLE IS ATTACHED TO CROSSHEAD OF LOAD TEST ANNEX, BLDG. 4619, AND REMOVED FROM BED OF KMAG TRANSPORTER

NASA Image and Video Library

2018-03-28

SLS INTERTANK TEST ARTICLE IS ATTACHED TO CROSSHEAD OF LOAD TEST ANNEX, BLDG. 4619, AND REMOVED FROM BED OF KMAG TRANSPORTER. Matt Cash conducts tag up meeting before lift of ITA from KMAG transporter

SLS Intertank Test Article, ITA, is attached to crosshead of loa

NASA Image and Video Library

2018-04-04

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. Rob Ziegler, L, and Roger Myrick, R, of Aerie Aerospace attach load lines to Aft Load Ring of Intertank Test Articlle

13.1 Foot Diameter Fluted-Core Sandwich Composite Test Article

NASA Image and Video Library

2013-09-26

White light shape and measurement of a 13.1 Foot diameter fluted-core sandwich composite test article designed by LaRC and fabricated by Boeing Under Space Act Agreement SAA1-737, Annex 14. to be tested in LaRC's combined Loads Testing System (COLTS).

13.1 Foot Diameter Fluted-Core Sandwich Composite Test Article

NASA Image and Video Library

2013-09-25

White light shape and measurement of a 13.1 Foot diameter fluted-core sandwich composite test article designed by LaRC and fabricated by Boeing Under Space Act Agreement SAA1-737, Annex 14. to be tested in LaRC's combined Loads Testing System (COLTS).