Sharing the Diagnostic Process in the Clinical Teaching Environment: A Case Study

ERIC Educational Resources Information Center

Cuello-Garcia; Carlos

2005-01-01

Revealing or visualizing the thinking involved in making clinical decisions is a challenge. A case study is presented with a visual implement for sharing the diagnostic process. This technique adapts the Bayesian approach to the case presentation. Pretest probabilities and likelihood ratios are gathered to obtain post-test probabilities of every…

30 CFR 250.423 - What are the requirements for pressure testing casing?

Code of Federal Regulations, 2010 CFR

2010-07-01

... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations... drilling or other down-hole operations until you obtain a satisfactory pressure test. If the pressure...

Experimental Investigation of Ice Accretion Effects on a Swept Wing

NASA Technical Reports Server (NTRS)

Wong, S. C.; Vargas, M.; Papadakis, M.; Yeong, H. W.; Potapczuk, M.

2005-01-01

An experimental investigation was conducted to study the effects of 2-, 5-, 10-, and 22.5-min ice accretions on the aerodynamic performance of a swept finite wing. The ice shapes tested included castings of ice accretions obtained from icing tests at the NASA Glenn Icing Research Tunnel (IRT) and simulated ice shapes obtained with the LEWICE 2.0 ice accretion code. The conditions used for the icing tests were selected to provide five glaze ice shapes with complete and incomplete scallop features and a small rime ice shape. The LEWICE ice shapes were defined for the same conditions as those used in the icing tests. All aerodynamic performance tests were conducted in the 7- x 10-ft Low-Speed Wind Tunnel Facility at Wichita State University. Six component force and moment measurements, aileron hinge moments, and surface pressures were obtained for a Reynolds number of 1.8 million based on mean aerodynamic chord and aileron deflections in the range of -15o to 20o. Tests were performed with the clean wing, six IRT ice shape castings, seven smooth LEWICE ice shapes, and seven rough LEWICE ice shapes. Roughness for the LEWICE ice shapes was simulated with 36-size grit. The experiments conducted showed that the glaze ice castings reduced the maximum lift coefficient of the clean wing by 11.5% to 93.6%, while the 5-min rime ice casting increased maximum lift by 3.4%. Minimum iced wing drag was 133% to 3533% greater with respect to the clean case. The drag of the iced wing near the clean wing stall angle of attack was 17% to 104% higher than that of the clean case. In general, the aileron remained effective in changing the lift of the clean and iced wings for all angles of attack and aileron deflections tested. Aileron hinge moments for the iced wing cases remained within the maximum and minimum limits defined by the clean wing hinge moments. Tests conducted with the LEWICE ice shapes showed that in general the trends in aerodynamic performance degradation of the wing with the simulated ice shapes were similar to those obtained with the IRT ice shape castings. However, in most cases, the ice castings resulted in greater aerodynamic performance losses than those obtained with the LEWICE ice shapes. For the majority of the LEWICE ice shapes, the addition of 36-size grit roughness to the smooth ice shapes increased aerodynamic performance losses.

Statistical correlation analysis for comparing vibration data from test and analysis

NASA Technical Reports Server (NTRS)

Butler, T. G.; Strang, R. F.; Purves, L. R.; Hershfeld, D. J.

1986-01-01

A theory was developed to compare vibration modes obtained by NASTRAN analysis with those obtained experimentally. Because many more analytical modes can be obtained than experimental modes, the analytical set was treated as expansion functions for putting both sources in comparative form. The dimensional symmetry was developed for three general cases: nonsymmetric whole model compared with a nonsymmetric whole structural test, symmetric analytical portion compared with a symmetric experimental portion, and analytical symmetric portion with a whole experimental test. The theory was coded and a statistical correlation program was installed as a utility. The theory is established with small classical structures.

Advanced Subsonic Technology (AST) Area of Interest (AOI) 6: Develop and Validate Aeroelastic Codes for Turbomachinery

NASA Technical Reports Server (NTRS)

Gardner, Kevin D.; Liu, Jong-Shang; Murthy, Durbha V.; Kruse, Marlin J.; James, Darrell

1999-01-01

AlliedSignal Engines, in cooperation with NASA GRC (National Aeronautics and Space Administration Glenn Research Center), completed an evaluation of recently-developed aeroelastic computer codes using test cases from the AlliedSignal Engines fan blisk and turbine databases. Test data included strain gage, performance, and steady-state pressure information obtained for conditions where synchronous or flutter vibratory conditions were found to occur. Aeroelastic codes evaluated included quasi 3-D UNSFLO (MIT Developed/AE Modified, Quasi 3-D Aeroelastic Computer Code), 2-D FREPS (NASA-Developed Forced Response Prediction System Aeroelastic Computer Code), and 3-D TURBO-AE (NASA/Mississippi State University Developed 3-D Aeroelastic Computer Code). Unsteady pressure predictions for the turbine test case were used to evaluate the forced response prediction capabilities of each of the three aeroelastic codes. Additionally, one of the fan flutter cases was evaluated using TURBO-AE. The UNSFLO and FREPS evaluation predictions showed good agreement with the experimental test data trends, but quantitative improvements are needed. UNSFLO over-predicted turbine blade response reductions, while FREPS under-predicted them. The inviscid TURBO-AE turbine analysis predicted no discernible blade response reduction, indicating the necessity of including viscous effects for this test case. For the TURBO-AE fan blisk test case, significant effort was expended getting the viscous version of the code to give converged steady flow solutions for the transonic flow conditions. Once converged, the steady solutions provided an excellent match with test data and the calibrated DAWES (AlliedSignal 3-D Viscous Steady Flow CFD Solver). However, efforts expended establishing quality steady-state solutions prevented exercising the unsteady portion of the TURBO-AE code during the present program. AlliedSignal recommends that unsteady pressure measurement data be obtained for both test cases examined for use in aeroelastic code validation.

Standardized Test Results: An Opportunity for English Program Improvement

ERIC Educational Resources Information Center

Jiménez, Maureyra; Rodríguez, Caroll; Rey Paba, Lourdes

2017-01-01

This case study explores the relationship between the results obtained by a group of Industrial Engineering students on a national standardized English test and the impact these results had on language program improvement. The instruments used were interviews, document analysis, observations, surveys, and test results analysis. Findings indicate…

Are Case Studies a Good Teaching Tool for CS1?

DTIC Science & Technology

1995-01-01

old AP/CS tests to compare our students’ performance against the results obtained by ETS. Currently, the introductory courses at CMU are taught using...Carrasquel, J., Goldenson, D. & Miller, P. L. (1985). Competency Testing in Introductory Computer Science: The Mastery Examination at Carnegie Mellon... courses is that many places do not have enough facilities (or the necessary time) required for long programming assignments. In our opinion, using case

Use of warrants for breath test refusal : case studies

DOT National Transportation Integrated Search

2007-10-01

This study investigated the use of warrants to obtain blood samples from drivers arrested for alcohol-impaired driving and who refuse to provide breath samples when requested to do so by law enforcement officers. Case studies were conducted in four S...

Childhood exposure to infection and risk of adult onset wheeze and atopy.

PubMed

Bodner, C; Anderson, W J; Reid, T S; Godden, D J

2000-05-01

The prevalence of asthma and allergic diseases in children and young adults is inversely associated with family size. It has been suggested that more frequent exposure to infections in a large family group, particularly those spread by the faecal-oral route, may protect against atopic diseases, although not all published data support this hypothesis. Whether similar considerations apply to adult onset wheeze is unknown. The relationship between adult onset wheezing and atopy measured in adulthood and childhood exposure to a range of infections was investigated. A nested case control study of participants in a 30 year follow up survey was conducted. Questionnaire data on childhood infections had been obtained in a 1964 survey. In 1995 a further questionnaire on respiratory symptoms and other risk factors for wheezing illness was administered, total IgE, skin and RAST tests were performed, and serum was stored. In 1999 serological tests for hepatitis A, Helicobacter pylori, and Toxoplasma gondii were performed on the stored samples. Information from the 1964 questionnaires was available for 97 cases and 208 controls and serological tests were obtained for 85 cases and 190 controls. The potential risk factors were examined for all cases, those who reported doctor diagnosed asthma, those who described persistent cough and phlegm with wheeze, and subjects stratified by atopic status. The sibship structure was similar in cases and controls. In univariate analysis of all cases, childhood infections reported by parents as acquired either before or after the age of three years did not influence case:control or atopic status. Seropositivity was also similar for all cases and controls, but cases in the subgroup with chronic cough and phlegm were more likely to be seropositive for hepatitis A and H pylori. Seropositivity was unrelated to atopic status. In multivariate analyses both the effect of having two or more younger siblings (OR 0.1, 95% CI 0.03 to 0.8) and of acquiring measles up to the age of three (OR 0.2, CI 0.03 to 0.8) were significantly related to a lower risk of doctor diagnosed asthma. In these well characterised subjects, exposure to infections as measured by parental reports obtained at age 10-14 years and by serological tests obtained in adulthood did not influence the development of wheezing symptoms or atopic status in adulthood. However, early exposure to measles and family size may be associated with a lower risk of adult onset doctor diagnosed asthma.

A case of misdiagnosis of mild cognitive impairment: The utility of symptom validity testing in an outpatient memory clinic.

PubMed

Roor, Jeroen J; Dandachi-FitzGerald, Brechje; Ponds, Rudolf W H M

2016-01-01

Noncredible symptom reports hinder the diagnostic process. This fact is especially the case for medical conditions that rely on subjective report of symptoms instead of objective measures. Mild cognitive impairment (MCI) primarily relies on subjective report, which makes it potentially susceptible to erroneous diagnosis. In this case report, we describe a 59-year-old female patient diagnosed with MCI 10 years previously. The patient was referred to the neurology department for reexamination by her general practitioner because of cognitive complaints and persistent fatigue. This case study used information from the medical file, a new magnetic resonance imaging brain scan, and neuropsychological assessment. Current neuropsychological assessment, including symptom validity tests, clearly indicated noncredible test performance, thereby invalidating the obtained neuropsychological test data. We conclude that a blind spot for noncredible symptom reports existed in the previous diagnostic assessments. This case highlights the usefulness of formal symptom validity testing in the diagnostic assessment of MCI.

[Serodiagnosis of toxoplasmosis: a comparative multicenter study of a standard scale through various actual tests and expression of the results in international units. Groupe de travail toxoplasmose du Contrôle national de qualité en parasotologie. Syndicat des fabricants de réactifs de laboratoire. Groupe de travail standardisation des tests sérologiques du Réseau européen de lutte contre la toxoplasmose congénitale].

PubMed

Petithory, J C; Ambroise-Thomas, P; De Loye, J; Pelloux, H; Goullier-Fleuret, A; Milgram, M; Buffard, C; Garin, J P

1996-01-01

Reported are the results of a multicentre study involving 40 laboratories that was carried out in France to assess all the currently available methods used for the serodiagnosis of toxoplasmosis. For this purpose 10 batches of control sera were prepared with titres in the range 0-260 IU per ml. These sera were tested in nine laboratories using immunofluorescence methods; in three laboratories using dye tests; in forty laboratories using enzyme-linked immunosorbent assay; in four laboratories using direct agglutination and haemagglutination; in seven laboratories using the high-sensitivity IgG agglutination test; and in three laboratories using the latex agglutination test. In this way, 70 series of titrations were carried out using seven procedures and the results were compared with those obtained using the WHO reference serum in 15 cases, with the French national E6 serum in 16 other cases, and in 39 cases using 15 reference sera supplied by the reagent manufacturers. Rigorous comparison of the tests was not possible in all cases because one aim of the study was to ensure that the tests were carried out under the usual working conditions that prevailed in the participating laboratories. The results obtained indicate that the serological tests currently available for toxoplasmosis are acceptable for its serodiagnosis. Presentation of the titres in IU has advantages; however, caution is required since the definition of IU varies according to the test and reagents used. It is therefore essential that the conditions and limits for a positive reaction be carefully defined in each case, especially for commercially available kits.

Comparision of Immunohistochemical Expression of CD10 in Odontogenic Cysts

PubMed Central

Munisekhar, M.S.; Suri, Charu; Rajalbandi, Santosh Kumar; M.R., Pradeep; Gothe, Pavan

2014-01-01

Background: Expression of CD10 has been documented in various tumors like nasopharyngeal carcinoma, gastric carcinoma, squamous cell carcinoma, odontogenic tumors. Aim: To evaluate and compare CD10 expression in odontogenic cysts like radicular cyst, dentigerous cyst and odontogenic keratocyst (OKC). Materials and Methods: Total 60 cases were included in the study, comprising 20 cases each of radicular, dentigerous and odontogenic keratocyst. Each case was evaluated and compared for immunohistochemical expression of CD10. Results obtained were statistically analysed using ANOVA test followed by post hoc test Tukey-Kramer Multiple Comparisons Test for continuous variable and Chi-square test for discrete variable. Results: More number of cases showing sub-epithelial stromal CD10 expression were found in OKC among the cysts. Conclusion: CD10 expression was more in OKC compared to radicular and dentigerous cysts. PMID:25584313

Discharge characteristics of 300 ampere-hour Ni-Zn traction cells

NASA Technical Reports Server (NTRS)

Ewashinka, J. G.

1979-01-01

Preliminary tests were performed on 300 amphere-hour nickel-zinc cells containing the Lewis improved inorganic-organic (I/O) separator. These cells also have other design features included to optimize performance and cycle life. The tests carried out were formation tests and characteristic discharge tests. Information obtained include case temperature and maximum power delivered.

Rapid microbiological screening for tuberculosis in HIV-positive patients on the first day of acute hospital admission by systematic testing of urine samples using Xpert MTB/RIF: a prospective cohort in South Africa.

PubMed

Lawn, Stephen D; Kerkhoff, Andrew D; Burton, Rosie; Schutz, Charlotte; van Wyk, Gavin; Vogt, Monica; Pahlana, Pearl; Nicol, Mark P; Meintjes, Graeme

2015-08-14

Autopsy studies of HIV/AIDS-related hospital deaths in sub-Saharan Africa reveal frequent failure of pre-mortem diagnosis of tuberculosis (TB), which is found in 34-64 % of adult cadavers. We determined the overall prevalence and predictors of TB among consecutive unselected HIV-positive adults requiring acute hospital admission and the comparative diagnostic yield obtained by screening urine and sputum samples obtained on day 1 of admission with Xpert MTB/RIF (Xpert). To determine overall TB prevalence accurately, comprehensive clinical sampling (sputum, urine, blood plus other relevant samples) was done and TB was defined by detection of Mycobacterium tuberculosis in any sample using Xpert and/or mycobacterial liquid culture. To evaluate a rapid screening strategy, we compared the diagnostic yield of Xpert testing sputum samples and urine samples obtained with assistance from a respiratory study nurse in the first 24 h of admission. Unselected HIV-positive acute adult new medical admissions (n = 427) who were not receiving TB treatment were enrolled irrespective of clinical presentation or symptom profile. From 2,391 cultures and Xpert tests done (mean, 5.6 tests/patient) on 1,745 samples (mean, 4.1 samples/patient), TB was diagnosed in 139 patients (median CD4 cell count, 80 cells/μL). TB prevalence was very high (32.6 %; 95 % CI, 28.1-37.2 %; 139/427). However, patient symptoms and risk factors were poorly predictive for TB. Overall, ≥1 non-respiratory sample(s) tested positive in 115/139 (83 %) of all TB cases, including positive blood cultures in 41/139 (29.5 %) of TB cases. In the first 24 h of admission, sputum (spot and/or induced samples) and urine were obtainable from 37.0 % and 99.5 % of patients, respectively (P <0.001). From these, the proportions of total TB cases (n = 139) that were diagnosed by Xpert testing sputum, urine or both sputum and urine combined within the first 24 h were 39/139 (28.1 %), 89/139 (64.0 %) and 108/139 (77.7 %) cases, respectively (P <0.001). The very high prevalence of active TB and its non-specific presentation strongly suggest the need for routine microbiological screening for TB in all HIV-positive medical admissions in high-burden settings. The incremental diagnostic yield from Xpert testing urine was very high and this strategy might be used to rapidly screen new admissions, especially if sputum is difficult to obtain.

Application of the implicit MacCormack scheme to the PNS equations

NASA Technical Reports Server (NTRS)

Lawrence, S. L.; Tannehill, J. C.; Chaussee, D. S.

1983-01-01

The two-dimensional parabolized Navier-Stokes equations are solved using MacCormack's (1981) implicit finite-difference scheme. It is shown that this method for solving the parabolized Navier-Stokes equations does not require the inversion of block tridiagonal systems of algebraic equations and allows the original explicit scheme to be employed in those regions where implicit treatment is not needed. The finite-difference algorithm is discussed and the computational results for two laminar test cases are presented. Results obtained using this method for the case of a flat plate boundary layer are compared with those obtained using the conventional Beam-Warming scheme, as well as those obtained from a boundary layer code. The computed results for a more severe test of the method, the hypersonic flow past a 15 deg compression corner, are found to compare favorably with experiment and a numerical solution of the complete Navier-Stokes equations.

75 FR 53371 - Liquefied Natural Gas Facilities: Obtaining Approval of Alternative Vapor-Gas Dispersion Models

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-31

... factors as the approved models, are validated by experimental test data, and receive the Administrator's... stage of the MEP involves applying the model against a database of experimental test cases including..., particularly the requirement for validation by experimental test data. That guidance is based on the MEP's...

Small Engine Technology (Set) Task 8 Aeroelastic Prediction Methods

NASA Technical Reports Server (NTRS)

Eick, Chris D.; Liu, Jong-Shang

1998-01-01

AlliedSignal Engines, in cooperation with NASA LeRC, completed an evaluation of recently developed aeroelastic computer codes using test cases from the AlliedSignal Engines fan blisk database. Test data for this task includes strain gage, light probe, performance, and steady-state pressure information obtained for conditions where synchronous or flutter vibratory conditions were found to occur. Aeroelastic codes evaluated include the quasi 3-D UNSFLO (developed at MIT and modified to include blade motion by AlliedSignal), the 2-D FREPS (developed by NASA LeRC), and the 3-D TURBO-AE (under development at NASA LeRC). Six test cases each where flutter and synchronous vibrations were found to occur were used for evaluation of UNSFLO and FREPS. In addition, one of the flutter cases was evaluated using TURBO-AE. The UNSFLO flutter evaluations were completed for 75 percent radial span and provided good agreement with the experimental test data. Synchronous evaluations were completed for UNSFLO but further enhancement needs to be added to the code before the unsteady pressures can be used to predict forced response vibratory stresses. The FREPS evaluations were hindered as the steady flow solver (SFLOW) was unable to converge to a solution for the transonic flow conditions in the fan blisk. This situation resulted in all FREPS test cases being attempted but no results were obtained during the present program. Currently, AlliedSignal is evaluating integrating FREPS with our existing steady flow solvers to bypass the SFLOW difficulties. ne TURBO-AE steady flow solution provided an excellent match with the AlliedSignal Engines calibrated DAWES 3-D viscous solver. Finally, the TURBO-AE unsteady analyses also matched experimental observations by predicting flutter for the single test case evaluated.

Ignition and Flame Development in the Case of Diesel Fuel Injection

NASA Technical Reports Server (NTRS)

Holfelder, Otto

1936-01-01

To investigate the process of ignition and combustion in the case of spray injection into heated air, a new form of apparatus is developed and the tests carried out with it described. Photographs of the spray before and after ignition are obtained at frequencies of 500 pictures per second. Pressures and temperatures are simultaneously recorded on oscillograms. Information on the initial conditions, ignition time lag, period of complete combustion, place where ignition starts, and general course of the combustion is obtained.

KRAS mutation testing in colorectal cancer: comparison of the results obtained using 3 different methods for the analysis of codons G12 and G13.

PubMed

Bihl, Michel P; Hoeller, Sylvia; Andreozzi, Maria Carla; Foerster, Anja; Rufle, Alexander; Tornillo, Luigi; Terracciano, Luigi

2012-03-01

Targeting the epidermal growth factor receptor (EGFR) is a new therapeutic option for patients with metastatic colorectal or lung carcinoma. However, the therapy efficiency highly depends on the KRAS mutation status in the given tumour. Therefore a reliable and secure KRAS mutation testing is crucial. Here we investigated 100 colorectal carcinoma samples with known KRAS mutation status (62 mutated cases and 38 wild type cases) in a comparative manner with three different KRAS mutation testing techniques (Pyrosequencing, Dideoxysequencing and INFINITI) in order to test their reliability and sensitivity. For the large majority of samples (96/100, 96%), the KRAS mutation status obtained by all three methods was the same. Only two cases with clear discrepancies were observed. One case was reported as wild type by the INFINITI method while the two other methods detected a G13C mutation. In the second case the mutation could be detected by the Pyrosequencing and INFINITI method (15% and 15%), while no signal for mutation could be observed with the Dideoxysequencing method. Additional two unclear results were due to a detection of a G12V with the INFINITI method, which was below cut-off when repeated and which was not detectable by the other two methods and very weak signals in a G12V mutated case with the Dideoxy- and Pyroseqencing method compared to the INFINITI method, respectively. In summary all three methods are reliable and robust methods in detecting KRAS mutations. INFINITI, however seems to be slightly more sensitive compared to Dideoxy- and Pyrosequencing.

Correlation functions in first-order phase transitions

NASA Astrophysics Data System (ADS)

Garrido, V.; Crespo, D.

1997-09-01

Most of the physical properties of systems underlying first-order phase transitions can be obtained from the spatial correlation functions. In this paper, we obtain expressions that allow us to calculate all the correlation functions from the droplet size distribution. Nucleation and growth kinetics is considered, and exact solutions are obtained for the case of isotropic growth by using self-similarity properties. The calculation is performed by using the particle size distribution obtained by a recently developed model (populational Kolmogorov-Johnson-Mehl-Avrami model). Since this model is less restrictive than that used in previously existing theories, the result is that the correlation functions can be obtained for any dependence of the kinetic parameters. The validity of the method is tested by comparison with the exact correlation functions, which had been obtained in the available cases by the time-cone method. Finally, the correlation functions corresponding to the microstructure developed in partitioning transformations are obtained.

Evaluating Malaria Prevalence Using Clinical Diagnosis Compared with Microscopy and Rapid Diagnostic Tests in a Tertiary Healthcare Facility in Rivers State, Nigeria.

PubMed

Wogu, M N; Nduka, F O

2018-01-01

The World Health Organization's policy on laboratory test of all suspected malaria cases before treatment has not yielded significant effects in several rural areas of Sub-Saharan Africa due to inadequate diagnostic infrastructure, leading to high morbidity and mortality rates. A cross-sectional randomized study was conducted to evaluate the validity of clinical malaria diagnosis through comparison with microscopy and rapid diagnostic test kits (RDTs) using 1000 consenting outpatients of a tertiary hospital in Nigeria. Physicians conducted clinical diagnosis, and blood samples were collected through venous procedure and analyzed for malaria parasites using Giemsa microscopy and RDT kits. Microscopy was considered the diagnostic "gold standard" and all data obtained were statistically analyzed using Chi-square test with a P value <0.05 considered significant. Malaria prevalence values of 20.1%, 43.1%, and 29.7% were obtained for clinical diagnosis, microscopy, and RDTs, respectively ( P < 0.05). Values of 47.2%, 95.9%, and 77.8% were obtained for sensitivity, specificity, and diagnostic accuracy, respectively, in clinical diagnosis, while RDTs had sensitivity, specificity, and diagnostic accuracy values of 73.7%, 97.3%, and 88.3%, respectively, when compared to microscopy ( P < 0.05). Clinical diagnosed malaria cases should be confirmed with a parasite-based laboratory diagnosis and more qualitative research is needed to explore why clinicians still use clinical diagnosis despite reported cases of its ineffectiveness.

Test Cases for the Benchmark Active Controls: Spoiler and Control Surface Oscillations and Flutter

NASA Technical Reports Server (NTRS)

Bennett, Robert M.; Scott, Robert C.; Wieseman, Carol D.

2000-01-01

As a portion of the Benchmark Models Program at NASA Langley, a simple generic model was developed for active controls research and was called BACT for Benchmark Active Controls Technology model. This model was based on the previously-tested Benchmark Models rectangular wing with the NACA 0012 airfoil section that was mounted on the Pitch and Plunge Apparatus (PAPA) for flutter testing. The BACT model had an upper surface spoiler, a lower surface spoiler, and a trailing edge control surface for use in flutter suppression and dynamic response excitation. Previous experience with flutter suppression indicated a need for measured control surface aerodynamics for accurate control law design. Three different types of flutter instability boundaries had also been determined for the NACA 0012/PAPA model, a classical flutter boundary, a transonic stall flutter boundary at angle of attack, and a plunge instability near M = 0.9. Therefore an extensive set of steady and control surface oscillation data was generated spanning the range of the three types of instabilities. This information was subsequently used to design control laws to suppress each flutter instability. There have been three tests of the BACT model. The objective of the first test, TDT Test 485, was to generate a data set of steady and unsteady control surface effectiveness data, and to determine the open loop dynamic characteristics of the control systems including the actuators. Unsteady pressures, loads, and transfer functions were measured. The other two tests, TDT Test 502 and TDT Test 5 18, were primarily oriented towards active controls research, but some data supplementary to the first test were obtained. Dynamic response of the flexible system to control surface excitation and open loop flutter characteristics were determined during Test 502. Loads were not measured during the last two tests. During these tests, a database of over 3000 data sets was obtained. A reasonably extensive subset of the data sets from the first two tests have been chosen for Test Cases for computational comparisons concentrating on static conditions and cases with harmonically oscillating control surfaces. Several flutter Test Cases from both tests have also been included. Some aerodynamic comparisons with the BACT data have been made using computational fluid dynamics codes at the Navier-Stokes level (and in the accompanying chapter SC). Some mechanical and active control studies have been presented. In this report several Test Cases are selected to illustrate trends for a variety of different conditions with emphasis on transonic flow effects. Cases for static angles of attack, static trailing-edge and upper-surface spoiler deflections are included for a range of conditions near those for the oscillation cases. Cases for trailing-edge control and upper-surface spoiler oscillations for a range of Mach numbers, angle of attack, and static control deflections are included. Cases for all three types of flutter instability are selected. In addition some cases are included for dynamic response measurements during forced oscillations of the controls on the flexible mount. An overview of the model and tests is given, and the standard formulary for these data is listed. Some sample data and sample results of calculations are presented. Only the static pressures and the first harmonic real and imaginary parts of the pressures are included in the data for the Test Cases, but digitized time histories have been archived. The data for the Test Cases are also available as separate electronic files.

Static testing of a bridge using an interferometric radar: the case study of "Ponte degli Alpini," Belluno, Italy.

PubMed

Dei, Devis; Mecatti, Daniele; Pieraccini, Massimiliano

2013-01-01

Ground-based radar interferometry is an increasingly popular technique for monitoring civil infrastructures. In this paper, the static testing of a bridge is reported. It was an 8-span bridge, 297 m long, named "Ponte degli Alpini," crossing the valley of the Ardo River. The radar has been used for testing a lateral span and a central span. The obtained results present elements of novelty not previously reported in the literature. In fact, some displacement measurements of the lateral span have been affected by a horizontal shift that has to be taken into account for a correct interpretation of the measured data. Furthermore, the measurements of the central span have been carried out with the radar positioned transversally with respect to the bridge deck; this unusual arrangement has allowed for obtaining displacement maps less geometrically distorted with respect to other cases reported in the literature.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roper, J; Bradshaw, B; Godette, K

Purpose: To create a knowledge-based algorithm for prostate LDR brachytherapy treatment planning that standardizes plan quality using seed arrangements tailored to individual physician preferences while being fast enough for real-time planning. Methods: A dataset of 130 prior cases was compiled for a physician with an active prostate seed implant practice. Ten cases were randomly selected to test the algorithm. Contours from the 120 library cases were registered to a common reference frame. Contour variations were characterized on a point by point basis using principle component analysis (PCA). A test case was converted to PCA vectors using the same process andmore » then compared with each library case using a Mahalanobis distance to evaluate similarity. Rank order PCA scores were used to select the best-matched library case. The seed arrangement was extracted from the best-matched case and used as a starting point for planning the test case. Computational time was recorded. Any subsequent modifications were recorded that required input from a treatment planner to achieve an acceptable plan. Results: The computational time required to register contours from a test case and evaluate PCA similarity across the library was approximately 10s. Five of the ten test cases did not require any seed additions, deletions, or moves to obtain an acceptable plan. The remaining five test cases required on average 4.2 seed modifications. The time to complete manual plan modifications was less than 30s in all cases. Conclusion: A knowledge-based treatment planning algorithm was developed for prostate LDR brachytherapy based on principle component analysis. Initial results suggest that this approach can be used to quickly create treatment plans that require few if any modifications by the treatment planner. In general, test case plans have seed arrangements which are very similar to prior cases, and thus are inherently tailored to physician preferences.« less

Detecting well casing leaks in Bangladesh using a salt spiking method

USGS Publications Warehouse

Stahl, M.O.; Ong, J.B.; Harvey, C.F.; Johnson, C.D.; Badruzzaman, A.B.M.; Tarek, M.H.; VanGeen, A.; Anderson, J.A.; Lane, J.W.

2014-01-01

We apply fluid-replacement logging in arsenic-contaminated regions of Bangladesh using a low-cost, down-well fluid conductivity logging tool to detect leaks in the cased section of wells. The fluid-conductivity tool is designed for the developing world: it is lightweight and easily transportable, operable by one person, and can be built for minimal cost. The fluid-replacement test identifies leaking casing by comparison of fluid conductivity logs collected before and after spiking the wellbore with a sodium chloride tracer. Here, we present results of fluid-replacement logging tests from both leaking and non-leaking casing from wells in Araihazar and Munshiganj, Bangladesh, and demonstrate that the low-cost tool produces measurements comparable to those obtained with a standard geophysical logging tool. Finally, we suggest well testing procedures and approaches for preventing casing leaks in Bangladesh and other developing countries.

Detecting well casing leaks in Bangladesh using a salt spiking method.

PubMed

Stahl, M O; Ong, J B; Harvey, C F; Johnson, C D; Badruzzaman, A B M; Tarek, M H; van Geen, A; Anderson, J A; Lane, J W

2014-09-01

We apply fluid-replacement logging in arsenic-contaminated regions of Bangladesh using a low-cost, down-well fluid conductivity logging tool to detect leaks in the cased section of wells. The fluid-conductivity tool is designed for the developing world: it is lightweight and easily transportable, operable by one person, and can be built for minimal cost. The fluid-replacement test identifies leaking casing by comparison of fluid conductivity logs collected before and after spiking the wellbore with a sodium chloride tracer. Here, we present results of fluid-replacement logging tests from both leaking and non-leaking casing from wells in Araihazar and Munshiganj, Bangladesh, and demonstrate that the low-cost tool produces measurements comparable to those obtained with a standard geophysical logging tool. Finally, we suggest well testing procedures and approaches for preventing casing leaks in Bangladesh and other developing countries. © 2014, National Ground Water Association.

40 CFR Appendix B to Part 61 - Test Methods

Code of Federal Regulations, 2010 CFR

2010-07-01

... below 28 liters/min (1.0 cfm). 8.2.2Perform test runs such that samples are obtained over a period or... cyclic operations, run sufficient tests for the accurate determination of the emissions that occur over... indicated by reddening (liberation of free iodine) in the first impinger. In these cases, the sample run may...

40 CFR Appendix B to Part 61 - Test Methods

Code of Federal Regulations, 2013 CFR

2013-07-01

... below 28 liters/min (1.0 cfm). 8.2.2Perform test runs such that samples are obtained over a period or... cyclic operations, run sufficient tests for the accurate determination of the emissions that occur over... indicated by reddening (liberation of free iodine) in the first impinger. In these cases, the sample run may...

40 CFR Appendix B to Part 61 - Test Methods

Code of Federal Regulations, 2012 CFR

2012-07-01

... below 28 liters/min (1.0 cfm). 8.2.2Perform test runs such that samples are obtained over a period or... cyclic operations, run sufficient tests for the accurate determination of the emissions that occur over... indicated by reddening (liberation of free iodine) in the first impinger. In these cases, the sample run may...

40 CFR Appendix B to Part 61 - Test Methods

Code of Federal Regulations, 2011 CFR

2011-07-01

... below 28 liters/min (1.0 cfm). 8.2.2Perform test runs such that samples are obtained over a period or... cyclic operations, run sufficient tests for the accurate determination of the emissions that occur over... indicated by reddening (liberation of free iodine) in the first impinger. In these cases, the sample run may...

40 CFR Appendix B to Part 61 - Test Methods

Code of Federal Regulations, 2014 CFR

2014-07-01

... below 28 liters/min (1.0 cfm). 8.2.2Perform test runs such that samples are obtained over a period or... cyclic operations, run sufficient tests for the accurate determination of the emissions that occur over... indicated by reddening (liberation of free iodine) in the first impinger. In these cases, the sample run may...

Energy potential of the modified excess sludge

NASA Astrophysics Data System (ADS)

Zawieja, Iwona

2017-11-01

On the basis of the SCOD value of excess sludge it is possible to estimate an amount of energy potentially obtained during the methane fermentation process. Based on a literature review, it has been estimated that from 1 kg of SCOD it is possible to obtain 3.48 kWh of energy. Taking into account the above methane and energy ratio (i.e. 10 kWh/1Nm3 CH4), it is possible to determine the volume of methane obtained from the tested sludge. Determination of potential energy of sludge is necessary for the use of biogas as a source of power generators as cogeneration and ensure the stability of this type of system. Therefore, the aim of the study was to determine the energy potential of excess sludge subjected to the thermal and chemical disintegration. In the case of thermal disintegration, test was conducted in the low temperature 80°C. The reagent used for the chemical modification was a peracetic acid, which in an aqueous medium having strong oxidizing properties. The time of chemical modification was 6 hours. Applied dose of the reagent was 1.0 ml CH3COOOH/L of sludge. By subjecting the sludge disintegration by the test methods achieved an increase in the SCOD value of modified sludge, indicating the improvement of biodegradability along with a concomitant increase in their energy potential. The obtained experimental production of biogas from disintegrated sludge confirmed that it is possible to estimate potential intensity of its production. The SCOD value of 2576 mg O2/L, in the case of chemical disintegration, was obtained for a dose of 1.0 ml CH3COOH/L. For this dose the pH value was equal 6.85. In the case of thermal disintegration maximum SCOD value was 2246 mg O2/L obtained at 80°C and the time of preparation 6 h. It was estimated that in case of thermal disintegration as well as for the chemical disintegration for selected parameters, the potential energy for model digester of active volume of 5L was, respectively, 0.193 and 0,118 kWh.

Transcranial Doppler-based assessment of cerebral autoregulation in critically ill children during diabetic ketoacidosis treatment.

PubMed

Ma, Li; Roberts, Joan S; Pihoker, Catherine; Richards, Todd L; Shaw, Dennis W W; Marro, Ken I; Vavilala, Monica S

2014-10-01

Impaired cerebral autoregulation may be associated with poor outcome in diabetic ketoacidosis. We examined change in cerebral autoregulation during diabetic ketoacidosis treatment. Prospective observational cohort study. Tertiary care children's hospital. Children admitted to the ICU with diabetic ketoacidosis (venous pH < 7.3, glucose > 300 mg/dL, HCO3 < 15 mEq/L, and ketonuria) constituted cases, and children with type I diabetes without diabetic ketoacidosis constituted controls. None. Between 2005 and 2009, 32 cases and 50 controls were enrolled. Transcranial Doppler ultrasonography was used to measure middle cerebral artery flow velocities, and cerebral autoregulation testing was achieved via tilt-table testing. Cases underwent two and controls underwent one cerebral autoregulation test. Cerebral autoregulation was quantified by the autoregulatory index (autoregulatory index < 0.4 = impaired and autoregulatory index 0.4-1.0 = intact autoregulation). The first autoregulation test was obtained early (time 1, 12-24 hr; median [interquartile range], 8 hr [5-18 hr]) during diabetic ketoacidosis treatment, and a second autoregulation test was obtained during recovery (time 2, 36-72 hr; median [ interquartile range], 46 hr [40-59 hr]) from time 0 (defined as time of insulin start). Cases had lower autoregulatory index at time 1 than time 2 (p < 0.001) as well lower autoregulatory index than control subjects (p < 0.001). Cerebral autoregulation was impaired in 40% (n = 13) of cases at time 1 and in 6% (n = 2) of cases at time 2. Five cases (17%) showed persistent impairment of cerebral autoregulation between times 1 and 2 of treatment. All control subjects had intact cerebral autoregulation. Impaired cerebral autoregulation was common early during diabetic ketoacidosis treatment. Although the majority improved during diabetic ketoacidosis treatment, 17% of subjects had impairment between 36 and 72 hours after start of insulin therapy. The observed impaired cerebral autoregulation appears specific to the diabetic ketoacidosis process in patients with type I diabetes.

Multiple statistical tests: Lessons from a d20.

PubMed

Madan, Christopher R

2016-01-01

Statistical analyses are often conducted with α= .05. When multiple statistical tests are conducted, this procedure needs to be adjusted to compensate for the otherwise inflated Type I error. In some instances in tabletop gaming, sometimes it is desired to roll a 20-sided die (or 'd20') twice and take the greater outcome. Here I draw from probability theory and the case of a d20, where the probability of obtaining any specific outcome is (1)/ 20, to determine the probability of obtaining a specific outcome (Type-I error) at least once across repeated, independent statistical tests.

A comparison of theory and flight test of the BO 105/BMR in hover and forward flight

NASA Technical Reports Server (NTRS)

Mirick, Paul H.

1988-01-01

Four cases were selected for comparison with theoretical predictions using stability data obtained during the flight test of the Bearingless Main Rotor (BMR) on a Messerschmidt-Boelkow-Blohm BO 105 helicopter. The four cases selected form the flight test included two ground resonance cases and two air resonance cases. The BMR used four modified BO 105 blades attached to a bearingless hub. The hub consisted of dual fiberglass C-channel beams attached to the hub center at 0.0238R and attached to the blade root at 0.25R with blade pitch control provided by a torque tube. Analyses from Bell Helicopter Textron, Boeing Vertol, and Sikorsky Aircraft were compared with the data and the correlation ranged from very poor-to-poor to poor-to-fair.

Exact Green's function method of solar force-free magnetic-field computations with constant alpha. I - Theory and basic test cases

NASA Technical Reports Server (NTRS)

Chiu, Y. T.; Hilton, H. H.

1977-01-01

Exact closed-form solutions to the solar force-free magnetic-field boundary-value problem are obtained for constant alpha in Cartesian geometry by a Green's function approach. The uniqueness of the physical problem is discussed. Application of the exact results to practical solar magnetic-field calculations is free of series truncation errors and is at least as economical as the approximate methods currently in use. Results of some test cases are presented.

A Comparison of Mean Phase Difference and Generalized Least Squares for Analyzing Single-Case Data

ERIC Educational Resources Information Center

Manolov, Rumen; Solanas, Antonio

2013-01-01

The present study focuses on single-case data analysis specifically on two procedures for quantifying differences between baseline and treatment measurements. The first technique tested is based on generalized least square regression analysis and is compared to a proposed non-regression technique, which allows obtaining similar information. The…

Awareness and uptake of direct-to-consumer genetic testing among cancer cases, their relatives, and controls: the Northwest Cancer Genetics Network.

PubMed

Hall, Taryn O; Renz, Anne D; Snapinn, Katherine W; Bowen, Deborah J; Edwards, Karen L

2012-07-01

To determine if awareness of, interest in, and use of direct-to-consumer (DTC) genetic testing is greater in a sample of high-risk individuals (cancer cases and their relatives), compared to controls. Participants were recruited from the Northwest Cancer Genetics Network. A follow-up survey was mailed to participants to assess DTC genetic testing awareness, interest, and use. One thousand two hundred sixty-seven participants responded to the survey. Forty-nine percent of respondents were aware of DTC genetic testing. Of those aware, 19% indicated interest in obtaining and <1% reported having used DTC genetic testing. Additional information supplied by respondents who reported use of DTC genetic tests indicated that 55% of these respondents likely engaged in clinical genetic testing, rather than DTC genetic testing. Awareness of DTC genetic testing was greater in our sample of high-risk individuals than in controls and population-based studies. Although interest in and use of these tests among cases in our sample were equivalent to other population-based studies, interest in testing was higher among relatives and people who self-referred for a registry focused on cancer than among cases and controls. Additionally, our results suggest that there may be some confusion about what constitutes DTC genetic testing.

Histological features associated with diagnostic agreement in atypical ductal hyperplasia of the breast: illustrative cases from the B-Path study.

PubMed

Allison, Kimberly H; Rendi, Mara H; Peacock, Sue; Morgan, Tom; Elmore, Joann G; Weaver, Donald L

2016-12-01

This study examined the case-specific characteristics associated with interobserver diagnostic agreement in atypical ductal hyperplasia (ADH) of the breast. Seventy-two test set cases with a consensus diagnosis of ADH from the B-Path study were evaluated. Cases were scored for 17 histological features, which were then correlated with the participant agreement with the consensus ADH diagnosis. Participating pathologists' perceptions of case difficulty, borderline features or whether they would obtain a second opinion were also examined for associations with agreement. Of the 2070 participant interpretations of the 72 consensus ADH cases, 48% were scored by participants as difficult and 45% as borderline between two diagnoses; the presence of both of these features was significantly associated with increased agreement (P < 0.001). A second opinion would have been obtained in 80% of interpretations, and this was associated with increased agreement (P < 0.001). Diagnostic agreement ranged from 10% to 89% on a case-by-case basis. Cases with papillary lesions, cribriform architecture and obvious cytological monotony were associated with higher agreement. Lower agreement rates were associated with solid or micropapillary architecture, borderline cytological monotony, or cases without a diagnostic area that was obvious on low power. The results of this study suggest that pathologists frequently recognize the challenge of ADH cases, with some cases being more prone to diagnostic variability. In addition, there are specific histological features associated with diagnostic agreement on ADH cases. Multiple example images from cases in this test set are provided to serve as educational illustrations of these challenges. © 2016 John Wiley & Sons Ltd.

Histologic Features associated with Diagnostic Agreement in Atypical Ductal Hyperplasia of the Breast: Illustrative Cases from the B-Path Study

PubMed Central

Allison, Kimberly H.; Rendi, Mara H.; Peacock, Sue; Morgan, Tom; Elmore, Joann G.; Weaver, Donald L.

2016-01-01

Background Case specific characteristics associated with interobserver diagnostic agreement in atypical ductal hyperplasia (ADH) of the breast are poorly understood. Methods Seventy-two test set cases with a consensus diagnosis of ADH from the B-Path study were evaluated. Cases were scored for 17 histologic features which were then correlated with the participant agreement with the consensus ADH diagnosis. Participating pathologists’ perceptions of case difficulty, borderline features, or if they would obtain a second opinion were also examined for associations with agreement. Results Of the 2,070 participant interpretations on the 72 consensus ADH cases, 48% were scored by participants as difficult and 45% as borderline between two diagnoses; the presence of both of these features was significantly associated with increased agreement (p < 0.001). A second opinion would have been obtained in 80% of interpretations, and this was associated with increased agreement (p < 0.001). Diagnostic agreement ranged from 10–89% on a case-by-case basis. Cases with papillary lesions, cribriform architecture and obvious cytologic monotony were associated with higher agreement. Lower agreement rates were associated with solid or micro-papillary architecture, borderline cytologic monotony or cases without a diagnostic area that was obvious on low power. Conclusions The results of this study suggest that pathologists frequently recognize the challenge of ADH cases with some cases more prone to diagnostic variability. In addition, there are specific histologic features associated with diagnostic agreement on ADH cases. Multiple example images from cases in this test set are provided to serve as educational illustrations of these challenges. PMID:27398812

Examiner Assessments of Clinical Performance: What Do They Tell Us About Clinical Competence?

ERIC Educational Resources Information Center

Maatsch, Jack L.

1987-01-01

This paper presents and interprets examiner and participant performance data obtained from an experimental field test of the test item and case simulation libraries of the American Board of Emergency Medicine Specialty Certificate Examination. Subjects were 94 medical students, residents, and emergency physicians. (Author/LMO)

RADIUM TREATMENT OF THE PLASTIC INDURATION OF THE PENIS AND THE PROBLEM OF THE RAY-PROTECTION (in Hungarian)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karpati, G.; Rojtor, I.; Patkai, G.

1963-08-01

On the basis of experiences obtained in a large material it was found that radium treatment of the plastic induration of the penis is very useful especially in the form of moulage and application. In the cases suitable to the radium moulage treatment approximately 1500 r doses are administered in a series, and in the case of application, doses of 2000 r are given. From measurements using a special protective shield, complete radiation protection of the testes is obtained. (P.C.H.)

Numerical solution to the glancing sidewall oblique shock wave/turbulent boundary layer interaction in three dimension

NASA Technical Reports Server (NTRS)

Anderson, B. H.; Benson, T. J.

1983-01-01

A supersonic three-dimensional viscous forward-marching computer design code called PEPSIS is used to obtain a numerical solution of the three-dimensional problem of the interaction of a glancing sidewall oblique shock wave and a turbulent boundary layer. Very good results are obtained for a test case that was run to investigate the use of the wall-function boundary-condition approximation for a highly complex three-dimensional shock-boundary layer interaction. Two additional test cases (coarse mesh and medium mesh) are run to examine the question of near-wall resolution when no-slip boundary conditions are applied. A comparison with experimental data shows that the PEPSIS code gives excellent results in general and is practical for three-dimensional supersonic inlet calculations.

Numerical solution to the glancing sidewall oblique shock wave/turbulent boundary layer interaction in three-dimension

NASA Technical Reports Server (NTRS)

Anderson, B. H.; Benson, T. J.

1983-01-01

A supersonic three-dimensional viscous forward-marching computer design code called PEPSIS is used to obtain a numerical solution of the three-dimensional problem of the interaction of a glancing sidewall oblique shock wave and a turbulent boundary layer. Very good results are obtained for a test case that was run to investigate the use of the wall-function boundary-condition approximation for a highly complex three-dimensional shock-boundary layer interaction. Two additional test cases (coarse mesh and medium mesh) are run to examine the question of near-wall resolution when no-slip boundary conditions are applied. A comparison with experimental data shows that the PEPSIS code gives excellent results in general and is practical for three-dimensional supersonic inlet calculations.

On the Relationship between Classical Test Theory and Item Response Theory: From One to the Other and Back

ERIC Educational Resources Information Center

Raykov, Tenko; Marcoulides, George A.

2016-01-01

The frequently neglected and often misunderstood relationship between classical test theory and item response theory is discussed for the unidimensional case with binary measures and no guessing. It is pointed out that popular item response models can be directly obtained from classical test theory-based models by accounting for the discrete…

On the Relationship Between Classical Test Theory and Item Response Theory: From One to the Other and Back.

PubMed

Raykov, Tenko; Marcoulides, George A

2016-04-01

The frequently neglected and often misunderstood relationship between classical test theory and item response theory is discussed for the unidimensional case with binary measures and no guessing. It is pointed out that popular item response models can be directly obtained from classical test theory-based models by accounting for the discrete nature of the observed items. Two distinct observational equivalence approaches are outlined that render the item response models from corresponding classical test theory-based models, and can each be used to obtain the former from the latter models. Similarly, classical test theory models can be furnished using the reverse application of either of those approaches from corresponding item response models.

An alternative experimental case-control design for genetic association studies on bovine mastitis.

PubMed

Biffani, S; Del Corvo, M; Capoferri, R; Pedretti, A; Luini, M; Williams, J L; Pagnacco, G; Minvielle, F; Minozzi, G

2017-04-01

The possibility of using genetic control strategies to increase disease resistance to infectious diseases relies on the identification of markers to include in the breeding plans. Possible incomplete exposure of mastitis-free (control) animals, however, is a major issue to find relevant markers in genetic association studies for infectious diseases. Usually, designs based on elite dairy sires are used in association studies, but an epidemiological case-control strategy, based on cows repeatedly field-tested could be an alternative for disease traits. To test this hypothesis, genetic association results obtained in the present work from a cohort of Italian Holstein cows tested for mastitis over time were compared with those from a previous genome-wide scan on Italian Holstein sires genotyped with 50k single nucleotide polymorphisms for de-regressed estimated breeding values for somatic cell counts (SCCs) on Bos taurus autosome (BTA6) and BTA14. A total of 1121 cows were selected for the case-control approach (cases=550, controls=571), on a combination of herd level of SCC incidence and of within herd individual level of SCC. The association study was conducted on nine previously identified markers, six on BTA6 and four on BTA14, using the R statistical environment with the 'qtscore' function of the GenABEL package, on high/low adjusted linear score as a binomial trait. The results obtained in the cow cohort selected on epidemiological information were in agreement with those obtained from the previous sire genome-wide association study (GWAS). Six out of the nine markers showed significant association, four on BTA14 (rs109146371, rs109234250, rs109421300, rs109162116) and two on BTA6 (rs110527224 and rs42766480). Most importantly, using mastitis as a case study, the current work further validated the alternative use of historical field disease data in case-control designs for genetic analysis of infectious diseases in livestock.

Detection of moisture and moisture related phenomena from Skylab. [correlation of S-194 antenna temperature and soil moisture content measurements for Kansas and Texas

NASA Technical Reports Server (NTRS)

Eagleman, J. R.; Pogge, E. C.; Moore, R. K. (Principal Investigator); Hardy, N.; Lin, W.; League, L.

1973-01-01

The author has identified the following significant results. Correlations between the S-194 antenna temperature and soil moisture have been obtained for three sets of data; one for Skylab 2 and two for Skylab 3. The best correlations were obtained for the surface to one inch depth in two cases and for the surface to two inches for the third case. Correlation coefficients for the surface to one inch depth were -0.98, -0.95, and -0.82. The lowest correlation coefficient was obtained with total soil moisture variations less than 4% across the test site.

Two opposed lateral jets injected into swirling crossflow

NASA Technical Reports Server (NTRS)

Lilley, D. G.; Mcmurry, C. B.; Ong, L. H.

1987-01-01

Experiments have been conducted to obtain the time-mean and turbulent quantities of opposed lateral jets in a low speed, nonreacting flowfield. A jet-to-crossflow velocity ratio of R = 4 was used throughout the experiments, with swirl vane angles of 0 (swirler removed), 45 and 70 degrees used with the crossflow. Flow visualization techniques used were neutrally-buoyant helium-filled soap bubbles and multispark photography in order to obtain the gross flowfield characteristics. Measurements of time-mean and turbulent quantities were obtained utilizing a six-orientation single hot-wire technique. For the nonswirling case, the jets were found not to penetrate past the test-section centerline, in contrast to the single lateral jet with the same jet-to-crossflow velocity ratio. In the swirling cases, the crossflow remains in a narrow region near the wall of the test section. The opposed jets are swept from their vertical courses into spiral trajectories close to the confining walls. Extensive results are presented in r-x plane plots.

Water impact analysis of space shuttle solid rocket motor by the finite element method

NASA Technical Reports Server (NTRS)

Buyukozturk, O.; Hibbitt, H. D.; Sorensen, E. P.

1974-01-01

Preliminary analysis showed that the doubly curved triangular shell elements were too stiff for these shell structures. The doubly curved quadrilateral shell elements were found to give much improved results. A total of six load cases were analyzed in this study. The load cases were either those resulting from a static test using reaction straps to simulate the drop conditions or under assumed hydrodynamic conditions resulting from a drop test. The latter hydrodynamic conditions were obtained through an emperical fit of available data. Results obtained from a linear analysis were found to be consistent with results obtained elsewhere with NASTRAN and BOSOR. The nonlinear analysis showed that the originally assumed loads would result in failure of the shell structures. The nonlinear analysis also showed that it was useful to apply internal pressure as a stabilizing influence on collapse. A final analysis with an updated estimate of load conditions resulted in linear behavior up to full load.

DNA testing in homicide investigations.

PubMed

Prahlow, Joseph A; Cameron, Thomas; Arendt, Alexander; Cornelis, Kenneth; Bontrager, Anthony; Suth, Michael S; Black, Lisa; Tobey, Rebbecca; Pollock, Sharon; Stur, Shawn; Cotter, Kenneth; Gabrielse, Joel

2017-10-01

Objectives With the widespread use of DNA testing, police, death investigators, and attorneys need to be aware of the capabilities of this technology. This review provides an overview of scenarios where DNA evidence has played a major role in homicide investigations in order to highlight important educational issues for police, death investigators, forensic pathologists, and attorneys. Methods This was a nonrandom, observational, retrospective study. Data were obtained from the collective files of the authors from casework during a 15-year period, from 2000 through 2014. Results A series of nine scenarios, encompassing 11 deaths, is presented from the standpoint of the police and death investigation, the forensic pathology autopsy performance, the subsequent DNA testing of evidence, and, ultimately, the final adjudication of cases. Details of each case are presented, along with a discussion that focuses on important aspects of sample collection for potential DNA testing, especially at the crime scene and the autopsy. The presentation highlights the diversity of case and evidence types in which DNA testing played a valuable role in the successful prosecution of the case. Conclusions By highlighting homicides where DNA testing contributed to the successful adjudication of cases, police, death investigators, forensic pathologists, and attorneys will be better informed regarding the types of evidence and situations where such testing is of potential value.

Seroprevalence of toxoplasmosis in Korean pregnant women.

PubMed

Song, Kyoung-Ju; Shin, Jong-Chul; Shin, Ho-Joon; Nam, Ho-Woo

2005-06-01

This study was performed in order to evaluate the sero-epidemiological status of toxoplasmosis in pregnant Korean women. Among 5,175 sera and 750 amniotic fluid samples obtained from pregnant women, 41 serum samples (0.79%) and 10 (1.33%) amniotic fluid samples tested positive for IgG antibodies by ELISA. Fifty one cases showing a score more than 0.25 on ELISA were tested for PCR reaction against the SAG1 gene. Only one case of the 51 ELISA positive cases exhibited a positive reaction on all tests. This case had a history of acute nephropyelitis during early pregnancy, but fortunately, had delivered a phenotypically healthy baby. In this study, the seroprevalence of toxoplasmosis in pregnant women was found to be comparatively low, consistent with previous reports from Korea. However our trials, performed with a variety of diagnostic tools, were considered to be useful for the precise diagnosis of congenital toxoplasmosis.

Comparative Study on High-Order Positivity-preserving WENO Schemes

NASA Technical Reports Server (NTRS)

Kotov, Dmitry V.; Yee, Helen M.; Sjogreen, Bjorn Axel

2013-01-01

The goal of this study is to compare the results obtained by non-positivity-preserving methods with the recently developed positivity-preserving schemes for representative test cases. In particular the more di cult 3D Noh and Sedov problems are considered. These test cases are chosen because of the negative pressure/density most often exhibited by standard high-order shock-capturing schemes. The simulation of a hypersonic nonequilibrium viscous shock tube that is related to the NASA Electric Arc Shock Tube (EAST) is also included. EAST is a high-temperature and high Mach number viscous nonequilibrium ow consisting of 13 species. In addition, as most common shock-capturing schemes have been developed for problems without source terms, when applied to problems with nonlinear and/or sti source terms these methods can result in spurious solutions, even when solving a conservative system of equations with a conservative scheme. This kind of behavior can be observed even for a scalar case (LeVeque & Yee 1990) as well as for the case consisting of two species and one reaction (Wang et al. 2012). For further information concerning this issue see (LeVeque & Yee 1990; Griffiths et al. 1992; Lafon & Yee 1996; Yee et al. 2012). This EAST example indicated that standard high-order shock-capturing methods exhibit instability of density/pressure in addition to grid-dependent discontinuity locations with insufficient grid points. The evaluation of these test cases is based on the stability of the numerical schemes together with the accuracy of the obtained solutions.

Improving acoustic beamforming maps in a reverberant environment by modifying the cross-correlation matrix

NASA Astrophysics Data System (ADS)

Fischer, J.; Doolan, C.

2017-12-01

A method to improve the quality of acoustic beamforming in reverberant environments is proposed in this paper. The processing is based on a filtering of the cross-correlation matrix of the microphone signals obtained using a microphone array. The main advantage of the proposed method is that it does not require information about the geometry of the reverberant environment and thus it can be applied to any configuration. The method is applied to the particular example of aeroacoustic testing in a hard-walled low-speed wind tunnel; however, the technique can be used in any reverberant environment. Two test cases demonstrate the technique. The first uses a speaker placed in the hard-walled working section with no wind tunnel flow. In the second test case, an airfoil is placed in a flow and acoustic beamforming maps are obtained. The acoustic maps have been improved, as the reflections observed in the conventional maps have been removed after application of the proposed method.

[Studies of flomoxef in neonates].

PubMed

Sato, H; Narita, A; Matsumoto, K; Nakazawa, S; Suzuki, H; Nakanishi, Y; Nagao, K; Nakazawa, S; Niinou, K

1991-11-01

Studies on pharmacokinetics and clinical effects of flomoxef (FMOX), a parenteral oxacephem antibiotic, were carried out in neonates. The results obtained are summarized as follows. 1. Mean peak serum concentrations of FMOX upon single administrations at doses of 20 mg/kg and 40 mg/kg were 33.3 +/- 7.33 micrograms/ml and 68.9 micrograms/ml, respectively. 2. Mean urinary recovery rates of FMOX in the first 6 hours after administration of the above doses were 35.2% and 48.3%, respectively. 3. FMOX was administered to 4 cases including 1 prophylactic case, 1 case each with aspiration pneumonia and sepsis, hypodermic abscess of the head, and itrauterine infection, at a dose of 20-30 mg/kg 2 or 3 times a day. Clinically, excellent results were obtained in 3 cases including an methicillin-resistant Staphylococcus aureus case. 4. No side effects nor abnormal laboratory test results were observed.

Comparison of Performance Characteristics of Aspergillus PCR in Testing a Range of Blood-Based Samples in Accordance with International Methodological Recommendations.

PubMed

Springer, Jan; White, P Lewis; Hamilton, Shanna; Michel, Denise; Barnes, Rosemary A; Einsele, Hermann; Löffler, Juergen

2016-03-01

Standardized methodologies for the molecular detection of invasive aspergillosis (IA) have been established by the European Aspergillus PCR Initiative for the testing of whole blood, serum, and plasma. While some comparison of the performance of Aspergillus PCR when testing these different sample types has been performed, no single study has evaluated all three using the recommended protocols. Standardized Aspergillus PCR was performed on 423 whole-blood pellets (WBP), 583 plasma samples, and 419 serum samples obtained from hematology patients according to the recommendations. This analysis formed a bicenter retrospective anonymous case-control study, with diagnosis according to the revised European Organization for Research and Treatment of Cancer/Invasive Fungal Infections Cooperative Group and National Institute of Allergy and Infectious Diseases Mycoses Study Group (EORTC/MSG) consensus definitions (11 probable cases and 36 controls). Values for clinical performance using individual and combined samples were calculated. For all samples, PCR positivity was significantly associated with cases of IA (for plasma, P = 0.0019; for serum, P = 0.0049; and for WBP, P = 0.0089). Plasma PCR generated the highest sensitivity (91%); the sensitivities for serum and WBP PCR were 80% and 55%, respectively. The highest specificity was achieved when testing WBP (96%), which was significantly superior to the specificities achieved when testing serum (69%, P = 0.0238) and plasma (53%, P = 0.0002). No cases were PCR negative in all specimen types, and no controls were PCR positive in all specimens. This study confirms that Aspergillus PCR testing of plasma provides robust performance while utilizing commercial automated DNA extraction processes. Combining PCR testing of different blood fractions allows IA to be both confidently diagnosed and excluded. A requirement for multiple PCR-positive plasma samples provides similar diagnostic utility and is technically less demanding. Time to diagnosis may be enhanced by testing multiple contemporaneously obtained sample types. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

LAVA Simulations for the AIAA Sonic Boom Prediction Workshop

NASA Technical Reports Server (NTRS)

Housman, Jeffrey A.; Sozer, Emre; Moini-Yekta , Shayan; Kiris, Cetin C.

2014-01-01

Computational simulations using the Launch Ascent and Vehicle Aerodynamics (LAVA) framework are presented for the First AIAA Sonic Boom Prediction Workshop test cases. The framework is utilized with both structured overset and unstructured meshing approaches. The three workshop test cases include an axisymmetric body, a Delta Wing-Body model, and a complete low-boom supersonic transport concept. Solution sensitivity to mesh type and sizing, and several numerical convective flux discretization choices are presented and discussed. Favorable comparison between the computational simulations and experimental data of nearand mid-field pressure signatures were obtained.

Mechanical Testing of Polymeric Composites for Aircraft Applications: Standards, Requirements and Limitations

NASA Astrophysics Data System (ADS)

Chinchan, Levon; Shevtsov, Sergey; Soloviev, Arcady; Shevtsova, Varvara; Huang, Jiun-Ping

The high-loaded parts of modern aircrafts and helicopters are often produced from polymeric composite materials. Such materials consist of reinforcing fibers, packed by layers with the different angles, and resin, which uniformly distributes the structural stresses between fibers. These composites should have an orthotropic symmetry of mechanical properties to obtain the desirable spatial distribution of elastic moduli consistent to the external loading pattern. Main requirements to the aircraft composite materials are the specified elastic properties (9 for orthotropic composite), long-term strength parameters, high resistance against the environmental influences, low thermal expansion to maintain the shape stability. These properties are ensured by an exact implementation of technological conditions and many testing procedures performed with the fibers, resin, prepregs and ready components. Most important mechanical testing procedures are defined by ASTM, SACMA and other standards. However in each case the wide diversity of components (dimensions and lay-up of fibers, rheological properties of thermosetting resins) requires a specific approach to the sample preparation, testing, and numerical processing of the testing results to obtain the veritable values of tested parameters. We pay the special attention to the cases where the tested specimens are cut not from the plates recommended by standards, but from the ready part manufactured with the specific lay-up, tension forces on the reinforcing fiber at the filament winding, and curing schedule. These tests can provide most useful information both for the composite structural design and to estimate a quality of the ready parts. We consider an influence of relation between specimen dimensions and pattern of the fibers winding (or lay-up) on the results of mechanical testing for determination of longitudinal, transverse and in-plane shear moduli, an original numerical scheme for reconstruction of in-plane shear modulus measured by the modified Iosipescu method which use finite element based numerical processing and indicative data preliminary obtained by the short-beam test. The sensitivity and ability to decoupling the values of in-plane and interlaminar shear moduli obtained by the sample twisting test is studied and discussed.

[CLINICAL OBSERVATION OF ONE-STAGE ARTHROSCOPIC RECONSTRUCTION AND STRICT IMMOBILIZATION FOR TREATMENT OF KNEE DISLOCATION].

PubMed

Mamatkerimulla; Xu Gang; Wang, Xin; Zhang, Yang; Jia, Yong; Huang, Tao; Xing, Shuxing

2016-04-01

To investigate the effectiveness of one-stage arthroscopic reconstruction and strict immobilization for 6 weeks for treatment of knee dislocation. Between August 2010 and May 2013, 22 cases (22 knees) of knee dislocation were treated with one-stage reconstruction and strict immobilization for 6 weeks. There were 15 males and 7 females, aged 21-54 years (mean, 31.5 years). The left knee and right knee were involved in 8 cases and 14 cases respectively. The disease causes were traffic accident in 12 cases, falling from height in 6 cases, and sports injury in 4 cases. The time between injury and operation was less than 2 weeks in 6 cases, 2-3 weeks in 10 cases, and more than 3 weeks in 6 cases. The results of anterior drawer test, posterior drawer test, and Lachman test were positive in all patients. The posterior displacement of the tibia was more than 10 mm. The results of valgus stress test and varus stress test were positive in 13 cases and 11 cases respectively. The preoperative knee range of motion was (58.2 ± 28.4)°, Lysholm score was 39.7 ± 4.6. All patients had anterior cruciate ligament rupture and posterior cruciate ligament rupture; combined injuries included medial collateral ligament rupture in 11 cases, lateral collateral ligament rupture in 9 cases, both medial and lateral collateral ligament rupture in 2 cases, femoral condylar avulsion fracture in 2 cases, and meniscus injury in 7 cases. No nerve or blood vessel injury was observed. All cases obtained primary healing of incision without infection. All the patients were followed up 12-48 months (mean, 27.8 months). At 12 months after operation, the results of the anterior drawer test, posterior drawer test, Lachman test, valgus stress test, and varus stress test were all negative; the knee range of motion increased was significantly to (121.3 ± 7.9)° (t = 30.061, P = 0.000); Lysholm score was 87.2 ± 6.1, showing significant difference when compared with preoperative score (t = 24.642, P = 0.000). A combination oathogopi osta ge reconstruction and strict immobilization for treatment of knee dislocation is a safe and effective method, good stability and joint function can be achieved.

Pressure and temperature fields associated with aero-optics tests. [transonic wind tunnel tests

NASA Technical Reports Server (NTRS)

Raman, K. R.

1980-01-01

The experimental investigation carried out in a 6 x 6 ft wind tunnel on four model configurations in the aero-optics series of tests are described. The data obtained on the random pressures (static and total pressures) and total temperatures are presented. In addition, the data for static pressure fluctuations on the Coelostat turret model are presented. The measurements indicate that the random pressures and temperature are negligible compared to their own mean (or steady state) values for the four models considered, thus allowing considerable simplification in the calculations to obtain the statistical properties of the density field. In the case of the Coelostat model tests these simplifications cannot be assumed a priori and require further investigation.

Chemical burns of the oral mucosa: report of a case.

PubMed

Isenberg, S R; Hier, L A; Chauvin, P J

1996-03-01

Clinical diagnosis of a chemical burn of the oral mucous membranes may be a diagnostic challenge. This article's intent is to illustrate the typical appearance of a chemical mucosal burn and to increase awareness of the various compounds which, when in contact with the mucous membranes, can result in a burn. The authors present a case involving a self-inflicted chemical injury of the oral mucous membranes and illustrate how the submission of an easily-obtained tissue specimen for pathologic examination may aid in the diagnosis. Because these superficial tissues can be obtained and submitted without the need for local anesthetic, pathologic examination is a quick, easy, and valuable diagnostic test when a patient's history is difficult to obtain or intentionally misleading.

Propeller aircraft interior noise model. II - Scale-model and flight-test comparisons

NASA Technical Reports Server (NTRS)

Willis, C. M.; Mayes, W. H.

1987-01-01

A program for predicting the sound levels inside propeller driven aircraft arising from sidewall transmission of airborne exterior noise is validated through comparisons of predictions with both scale-model test results and measurements obtained in flight tests on a turboprop aircraft. The program produced unbiased predictions for the case of the scale-model tests, with a standard deviation of errors of about 4 dB. For the case of the flight tests, the predictions revealed a bias of 2.62-4.28 dB (depending upon whether or not the data for the fourth harmonic were included) and the standard deviation of the errors ranged between 2.43 and 4.12 dB. The analytical model is shown to be capable of taking changes in the flight environment into account.

Coupled rotor/airframe vibration analysis program manual. Volume 2: Sample input and output listings

NASA Technical Reports Server (NTRS)

Cassarino, S.; Sopher, R.

1982-01-01

Sample input and output listings obtained with the base program (SIMVIB) of the coupled rotor/airframe vibration analysis and the external programs, G400/F389 and E927 are presented. Results for five of the base program test cases are shown. They represent different applications of the SIMVIB program to study the vibration characteristics of various dynamic configurations. Input and output listings obtained for one cycle of the G400/F389 coupled program are presented. Results from the rotor aeroelastic analysis E927 also appear. A brief description of the check cases is provided. A summary of the check cases for all the external programs interacting with the SIMVIB program is illustrated.

Influence of model errors in optimal sensor placement

NASA Astrophysics Data System (ADS)

Vincenzi, Loris; Simonini, Laura

2017-02-01

The paper investigates the role of model errors and parametric uncertainties in optimal or near optimal sensor placements for structural health monitoring (SHM) and modal testing. The near optimal set of measurement locations is obtained by the Information Entropy theory; the results of placement process considerably depend on the so-called covariance matrix of prediction error as well as on the definition of the correlation function. A constant and an exponential correlation function depending on the distance between sensors are firstly assumed; then a proposal depending on both distance and modal vectors is presented. With reference to a simple case-study, the effect of model uncertainties on results is described and the reliability and the robustness of the proposed correlation function in the case of model errors are tested with reference to 2D and 3D benchmark case studies. A measure of the quality of the obtained sensor configuration is considered through the use of independent assessment criteria. In conclusion, the results obtained by applying the proposed procedure on a real 5-spans steel footbridge are described. The proposed method also allows to better estimate higher modes when the number of sensors is greater than the number of modes of interest. In addition, the results show a smaller variation in the sensor position when uncertainties occur.

The strains recommended for use in the bacterial reverse mutation test (OECD guideline 471) can be certified as non-genetically modified organisms.

PubMed

Sugiyama, Kei-Ichi; Yamada, Masami; Awogi, Takumi; Hakura, Atsushi

2016-01-01

The bacterial reverse mutation test, commonly called Ames test, is used worldwide. In Japan, the genetically modified organisms (GMOs) are regulated under the Cartagena Domestic Law, and organisms obtained by self-cloning and/or natural occurrence would be exempted from the law case by case. The strains of Salmonella typhimurium and Escherichia coli recommended for use in the bacterial reverse mutation test (OECD guideline 471), have been considered as non-GMOs because they can be constructed by self-cloning or naturally occurring bacterial strains, or do not disturb the biological diversity. The present article explains the reasons why these tester strains should be classified as non-GMOs.

WE-DE-201-04: Cross Validation of Knowledge-Based Treatment Planning for Prostate LDR Brachytherapy Using Principle Component Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roper, J; Ghavidel, B; Godette, K

Purpose: To validate a knowledge-based algorithm for prostate LDR brachytherapy treatment planning. Methods: A dataset of 100 cases was compiled from an active prostate seed implant service. Cases were randomized into 10 subsets. For each subset, the 90 remaining library cases were registered to a common reference frame and then characterized on a point by point basis using principle component analysis (PCA). Each test case was converted to PCA vectors using the same process and compared with each library case using a Mahalanobis distance to evaluate similarity. Rank order PCA scores were used to select the best-matched library case. Themore » seed arrangement was extracted from the best-matched case and used as a starting point for planning the test case. Any subsequent modifications were recorded that required input from a treatment planner to achieve V100>95%, V150<60%, V200<20%. To simulate operating-room planning constraints, seed activity was held constant, and the seed count could not increase. Results: The computational time required to register test-case contours and evaluate PCA similarity across the library was 10s. Preliminary analysis of 2 subsets shows that 9 of 20 test cases did not require any seed modifications to obtain an acceptable plan. Five test cases required fewer than 10 seed modifications or a grid shift. Another 5 test cases required approximately 20 seed modifications. An acceptable plan was not achieved for 1 outlier, which was substantially larger than its best match. Modifications took between 5s and 6min. Conclusion: A knowledge-based treatment planning algorithm for prostate LDR brachytherapy is being cross validated using 100 prior cases. Preliminary results suggest that for this size library, acceptable plans can be achieved without planner input in about half of the cases while varying amounts of planner input are needed in remaining cases. Computational time and planning time are compatible with clinical practice.« less

Research in Varying Burner Tilt Angle to Reduce Rear Pass Temperature in Coal Fired Boiler

NASA Astrophysics Data System (ADS)

Thrangaraju, Savithry K.; Munisamy, Kannan M.; Baskaran, Saravanan

2017-04-01

This research shows the investigation conducted on one of techniques that is used in Manjung 700 MW tangentially fired coal power plant. The investigation conducted in this research is finding out the right tilt angle for the burners in the boiler that causes an efficient temperature distribution and combustion gas flow pattern in the boiler especially at the rear pass section. The main outcome of the project is to determine the right tilt angle for the burner to create an efficient temperature distribution and combustion gas flow pattern that able to increase the efficiency of the boiler. The investigation is carried out by using Computational Fluid Dynamics method to obtain the results by varying the burner tilt angle. The boiler model is drawn by using designing software which is called Solid Works and Fluent from Computational Fluid Dynamics is used to conduct the analysis on the boiler model. The analysis is to imitate the real combustion process in the real Manjung 700 MW boiler. The expected results are to determine the right burner tilt angle with a computational fluid analysis by obtaining the temperature distribution and combustion gas flow pattern for each of the three angles set for the burner tilt angle in FLUENT software. Three burner tilt angles are selected which are burner tilt angle at (0°) as test case 1, burner tilt angle at (+10°) as test case 2 and burner tilt angle at (-10°) as test case 3. These entire three cases were run in CFD software and the results of temperature distribution and velocity vector were obtained to find out the changes on the three cases at the furnace and rear pass section of the boiler. The results are being compared in analysis part by plotting graphs to determine the right tilting angle that reduces the rear pass temperature.

New strategy for the survey of Toxoplasma gondii in meat for human consumption.

PubMed

Villena, Isabelle; Durand, Benoit; Aubert, Dominique; Blaga, Radu; Geers, Régine; Thomas, Myriam; Perret, Catherine; Alliot, Annie; Escotte-Binet, Sandie; Thébault, Anne; Boireau, Pascal; Halos, Lénaïg

2012-02-10

Monitoring of Toxoplasma infection in animals destined for human consumption is a great challenge for human toxoplasmosis prevention. This study aimed to compare results obtained from a naturally infected population of sheep using different tests and targeting an original matrix: meat samples and muscle fluids collected at the slaughterhouse. A commercial ELISA test was performed on diaphragm fluids from 419 ovine carcasses collected at the slaughterhouse. A MAT (modified agglutination test) was performed on heart fluids obtained from the same animals. In addition, all hearts were bioassayed in mice. Serological test agreement, the relative sensitivity of ELISA MAT and mouse bioassay as well as a correlation between titres and parasite isolation probability were statistically evaluated. The overall agreement (kappa coefficient=0.64) of ELISA on diaphragm fluids and MAT on heart fluids is substantial and subsequently both tests can be used for epidemiological studies. Relative sensitivity was higher for MAT performed on cardiac fluids (90%) than ELISA on diaphragm fluid (61%). For both serological tests, relative sensitivity is lower in lambs younger than 12 months. Relative sensitivity of mouse inoculation was 42%. A significant correlation was obtained between increasing MAT titres and probability to isolate live parasite from the heart. When the fluid titre was higher than 1:16, parasites were isolated in 65% of cases. When it was lower, isolation failed in 95% of the cases. According to our results, cardiac fluids appear to be a relevant matrix for toxoplasmosis survey in meat. Copyright © 2011 Elsevier B.V. All rights reserved.

76 FR 59407 - Center for Biologics Evaluation and Research Report of Scientific and Medical Literature and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... test data in the studies: Obtained positive skin tests in index cases by either skin prick or... 20852- 1448. Send one self-addressed adhesive label to assist the office in processing your requests... list of reviewed literature associated with each product. FDA's approach to creating this data file was...

STUDIES OF ANTIGENIC DIFFERENCES AMONG STRAINS OF INFLUENZA A BY MEANS OF RED CELL AGGLUTINATION

PubMed Central

Hirst, George K.

1943-01-01

A study of cross inhibition tests among strains of influenza A virus and their antisera showed that the results obtained were subject to a certain amount of variation due to the red cells, the virus suspensions, and the ferret antisera employed. Methods have been demonstrated for handling the data obtained from such tests, so that these variables were corrected or avoided, making it possible to use the agglutination technique for antigenic comparisons. The antigenic pattern of eighteen strains of influenza A virus, obtained from the 1940–41 epidemic in the United States, has been compared by means of agglutination inhibition tests with ferret antisera. No significant antigenic differences were found among sixteen of these strains (all isolated from throat washings by the inoculation of chick embryos) although they were obtained from individuals in widely separated regions of the country. Two strains, from cases occurring early in the epidemic and isolated from throat washings by ferret and mouse passage, showed a slight but significant strain difference from the other strains and from each other. One of the 1940–41 strains on cross test resembled the PR8 strain more closely than any other stock strain tested. PMID:19871338

Statistical Analysis of the Polarimetric Cloud Analysis and Seeding Test (POLCAST) Field Projects

NASA Astrophysics Data System (ADS)

Ekness, Jamie Lynn

The North Dakota farming industry brings in more than $4.1 billion annually in cash receipts. Unfortunately, agriculture sales vary significantly from year to year, which is due in large part to weather events such as hail storms and droughts. One method to mitigate drought is to use hygroscopic seeding to increase the precipitation efficiency of clouds. The North Dakota Atmospheric Research Board (NDARB) sponsored the Polarimetric Cloud Analysis and Seeding Test (POLCAST) research project to determine the effectiveness of hygroscopic seeding in North Dakota. The POLCAST field projects obtained airborne and radar observations, while conducting randomized cloud seeding. The Thunderstorm Identification Tracking and Nowcasting (TITAN) program is used to analyze radar data (33 usable cases) in determining differences in the duration of the storm, rain rate and total rain amount between seeded and non-seeded clouds. The single ratio of seeded to non-seeded cases is 1.56 (0.28 mm/0.18 mm) or 56% increase for the average hourly rainfall during the first 60 minutes after target selection. A seeding effect is indicated with the lifetime of the storms increasing by 41 % between seeded and non-seeded clouds for the first 60 minutes past seeding decision. A double ratio statistic, a comparison of radar derived rain amount of the last 40 minutes of a case (seed/non-seed), compared to the first 20 minutes (seed/non-seed), is used to account for the natural variability of the cloud system and gives a double ratio of 1.85. The Mann-Whitney test on the double ratio of seeded to non-seeded cases (33 cases) gives a significance (p-value) of 0.063. Bootstrapping analysis of the POLCAST set indicates that 50 cases would provide statistically significant results based on the Mann-Whitney test of the double ratio. All the statistical analysis conducted on the POLCAST data set show that hygroscopic seeding in North Dakota does increase precipitation. While an additional POLCAST field project would be necessary to obtain standardly accepted statistically significant results (p < 0.5) for the double ratio of precipitation amount, the obtained p-value of 0.063 is close and considering the positive result from other hygroscopic seeding experiments, the North Dakota Cloud Modification Project should consider implementation of hygroscopic seeding.

Theory of heat transfer and hydraulic resistance of oil radiators

NASA Technical Reports Server (NTRS)

Mariamov, N B

1942-01-01

In the present report the coefficients of heat transfer and hydraulic resistance are theoretically obtained for the case of laminar flow of a heated viscous liquid in a narrow rectangular channel. The results obtained are applied to the computation of oil radiators, which to a first approximation may be considered as made up of a system of such channels. In conclusion, a comparison is given of the theoretical with the experimental results obtained from tests on airplane oil radiators.

[Epidemiologic aspects of 42 cases of human brucellosis in the Republic of Djibouti].

PubMed

Gavazzi, G; Prigent, D; Baudet, J M; Banoita, S; Daoud, W

1997-01-01

Brucellosis is an ubiquitous anthropozoonoses in the Republic of Djibouti, but it has only been studied in the City of Djibouti. This retrospective study of 42 cases of human brucellosis diagnosed between April 1993 and April 1995 was carried out at the Peltier Hospital in Djibouti to obtain epidemiological data concerning brucellosis in the Republic of Djibouti. Diagnosis was based on clinical symptoms and positive immunologic tests (Rose Bengal test > 100 UI and Wright serology > 1/80). The following information was obtained for each patient: nationality, ethnic origin, place of residence, age, sex, and risk factors for exposure to infected animals or products. There were 30 men and 12 women including 38 Djiboutis, 3 Somalis, and 1 Ethiopian. Ethnic origin was Afar in 32 cases, Somali in 6 cases, and undetermined in 4 cases. Mean age was 31.6 years. Of the 38 Djiboutis, 15 lived in the district of Djibouti, 17 in the district of Tadjourah, 3 in the district of Obock, and none in districts located in the Southern part of the country. In 18 cases brucellosis involved cattle raisers from the Northern part of the country. In five cases no risk factor could be identified. The incidence of brucellosis in the Republic of Djibouti appears to be comparable to that observed in other highly endemic countries. Further study is needed to determine the exact incidence in man and animals and ascertain the need and feasibility of preventive measures.

Experiments on opposed lateral jets injected into swirling crossflow. M.S. Thesis Final Report

NASA Technical Reports Server (NTRS)

Mcmurry, C. B.; Lilley, D. G.

1986-01-01

Experiments have been conducted to obtain the time-mean and turbulent quantities of opposed lateral jets in a low speed, nonreacting flowfield. A jet-to-crossflow velocity ratio of R = v sub J/u sub 0 = 4 was used throughout the experiments, with swirl vane angles of d = 0 (swirler removed), 45 and 70 deg used with the crossflow. Flow visualization techniques used were neutrally-buoyant helium-filled soap bubbles and multispark photography in order to obtain the gross flowfield characteristics. Measurements of time-mean and turbulent quantities were obtained utilizing a six-orientation single hot-wire technique. For the nonswirling case, the jets were found not to penetrate past the test-section centerline, in contrast to the single lateral jet with the same jet-to-crossflow velocity ratio. In the swirling cases, the crossflow remains in a narrow region near the wall of the test section. The opposed jets are swept from their vertical courses into spiral trajectories close to the confining walls. Extensive results are presented in r-x plane plots.

Dynamical electrical conductivity of graphene.

PubMed

Rani, Luxmi; Singh, Navinder

2017-06-28

For graphene (a Dirac material) it has been theoretically predicted and experimentally observed that DC resistivity is proportional to T 4 when the temperature is much less than Bloch-Grüneisen temperature ([Formula: see text]) and T-linear in the opposite case ([Formula: see text]). Going beyond this case, we investigate the dynamical electrical conductivity in graphene using the powerful method of the memory function formalism. In the zero frequency regime, we obtain the above mentioned behavior which was previously obtained using the Bloch-Boltzmann kinetic equation. In the finite frequency regime, we obtain several new results: (1) the generalized Drude scattering rate, in the zero temperature limit, shows [Formula: see text] behavior at low frequencies ([Formula: see text]) and saturates at higher frequencies. We also observed the Holstein mechanism, however, with different power laws from that in the case of metals; (2) at higher frequencies, [Formula: see text], and higher temperatures [Formula: see text], we observed that the generalized Drude scattering rate is linear in temperature. In addition, several other results are also obtained. With the experimental advancement of this field, these results should be experimentally tested.

An initial investigation into methods of computing transonic aerodynamic sensitivity coefficients

NASA Technical Reports Server (NTRS)

Carlson, Leland A.

1991-01-01

Continuing studies associated with the development of the quasi-analytical (QA) sensitivity method for three dimensional transonic flow about wings are presented. Furthermore, initial results using the quasi-analytical approach were obtained and compared to those computed using the finite difference (FD) approach. The basic goals achieved were: (1) carrying out various debugging operations pertaining to the quasi-analytical method; (2) addition of section design variables to the sensitivity equation in the form of multiple right hand sides; (3) reconfiguring the analysis/sensitivity package in order to facilitate the execution of analysis/FD/QA test cases; and (4) enhancing the display of output data to allow careful examination of the results and to permit various comparisons of sensitivity derivatives obtained using the FC/QA methods to be conducted easily and quickly. In addition to discussing the above goals, the results of executing subcritical and supercritical test cases are presented.

Using a Nonparametric Bootstrap to Obtain a Confidence Interval for Pearson's "r" with Cluster Randomized Data: A Case Study

ERIC Educational Resources Information Center

Wagstaff, David A.; Elek, Elvira; Kulis, Stephen; Marsiglia, Flavio

2009-01-01

A nonparametric bootstrap was used to obtain an interval estimate of Pearson's "r," and test the null hypothesis that there was no association between 5th grade students' positive substance use expectancies and their intentions to not use substances. The students were participating in a substance use prevention program in which the unit of…

Allergic axillary dermatitis due to hydrogenated castor oil in a deodorant.

PubMed

Taghipour, Kathy; Tatnall, Frances; Orton, David

2008-03-01

We present a case of axillary dermatitis caused by hydrogenated castor oil (HCO) in a commercially available deodorant. Patch testing with constituents obtained from the manufacturer showed allergic reaction to HCO 'as is', whereas there was no reaction to HCO 30% in pet. Testing 10 controls with HCO 'as is' did not cause irritant contact dermatitis. Allergic contact dermatitis to non-HCO in cosmetics has been described previously but sensitization to HCO seems to be rare. Most common allergens identified in deodorants are fragrances, and this case illustrates that HCO is another possible allergen found in this group of personal care products. It is important that it is tested 'as is' to avoid false-negative results.

Frost Growth and Densification on a Flat Surface in Laminar Flow with Variable Humidity

NASA Technical Reports Server (NTRS)

Kandula, M.

2012-01-01

Experiments are performed concerning frost growth and densification in laminar flow over a flat surface under conditions of constant and variable humidity. The flat plate test specimen is made of aluminum-6031, and has dimensions of 0.3 mx0.3 mx6.35 mm. Results for the first variable humidity case are obtained for a plate temperature of 255.4 K, air velocity of 1.77 m/s, air temperature of 295.1 K, and a relative humidity continuously ranging from 81 to 54%. The second variable humidity test case corresponds to plate temperature of 255.4 K, air velocity of 2.44 m/s, air temperature of 291.8 K, and a relative humidity ranging from 66 to 59%. Results for the constant humidity case are obtained for a plate temperature of 263.7 K, air velocity of 1.7 m/s, air temperature of 295 K, and a relative humidity of 71.6 %. Comparisons of the data with the author's frost model extended to accommodate variable humidity suggest satisfactory agreement between the theory and the data for both constant and variable humidity.

Composite monocoque frame for a mountain bicycle: Testing and calculation

NASA Astrophysics Data System (ADS)

Castejón, L.; Miravete, A.; Ullod, J.; Larrodé, E.

1994-05-01

The present paper shows the way in which a monocoque frame of a mountain bicycle made of carbon fiber and kevlar laminate, a poliurethane foam core and different metallic stiffeners were analyzed. The study was performed in two parts, namely, a first part in which the bicycle was tested considering several static and dynamic cases and a second part carried out by using the F.E.M., from which vibration frequencies and modes were obtained, as well as the foam optimization to be used in the core. It was also possible to compare the results obtained in both parts.

Relationship of spermatoscopy, prostatic acid phosphatase activity and prostate-specific antigen (p30) assays with further DNA typing in forensic samples from rape cases.

PubMed

Romero-Montoya, Lydia; Martínez-Rodríguez, Hugo; Pérez, Miguel Antonio; Argüello-García, Raúl

2011-03-20

In the forensic laboratory the biological analyses for rape investigation commonly include vaginal swabs as sample material combined to biochemical tests including sperm cytology (SC) and detection of acid phosphatase activity (AP) and prostate-specific antigen (PSA, p30) for the conclusive identification of semen components. Most reports comparing these tests relied on analysis of semen samples or donor swabs taken under controlled conditions; however their individual or combined efficacy under real live sampling conditions in different laboratories is largely unknown. We carried out SC, APA and PSA analyses in vaginal swabs collected from casework rapes submitted to Mexican Forensic Laboratories at Texcoco and Toluca. On the basis of positive and negative results from each assay and sample, data were classified into eight categories (I-VIII) and compared with those obtained in the two only similar studies reported in Toronto, Canada and Hong Kong, China. SC and APA assays had the higher overall positivity in Toluca and Texcoco samples respectively and otherwise PSA had a lower but very similar positivity between these two laboratories. When compared to the previous studies some similarities were found, namely similar frequencies (at a ratio of approximately 1 out of 3) of samples being positive or negative by all techniques (Categories I and VI respectively) and a comparable overall positivity of APA and SC but higher than that of PSA. Indeed the combined results of using SC, APA and PSA tests was considered as conclusive for semen detection from approximately 1 out of 3 cases (Category I) to approximately 1 out of 2 cases in a scenario where at least SC is positive, strongly presumptive in 2 out of 3 cases (with at least one test positive) and the remainder 1 out of 3 cases (Category VI) suggested absence of semen. By determining Y-STR polymorphisms (12-loci) in additional samples obtained at Toluca laboratory, complete DNA profiles were determined from all Category I samples, none marker was detected from all Category VI samples and mostly partial profiles were obtained from samples of other categories. These observations give an overview on the variability in efficacy of each test performed at different laboratories and provide a general notion about the in praxis contribution of SC, APA and PSA tests for further DNA typing in the forensic analysis of rape. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Mediterranean Ocean Colour Chlorophyll trend

NASA Astrophysics Data System (ADS)

rinaldi, eleonora; colella, simone; santoleri, rosalia

2014-05-01

Monitoring chlorophyll (Chl) concentration, seen as a proxy for phytoplankton biomass, is an efficient tool in order to understand the response of marine ecosystem to human pressures. This is particularly important along the coastal regions, in which the strong anthropization and the irrational exploitation of resources represent a persistent threat to the biodiversity. The aim of this work is to assess the effectiveness and feasibility of using Ocean Color (OC) data to monitor the environmental changes in Mediterranean Sea and to develop a method for detecting trend from OC data that can constitute a new indicator of the water quality within the EU Marine Strategy Framework Directive implementation. In this study the Mediterranean merged Case1-Case2 chlorophyll product, produced by CNR-ISAC and distributed in the framework of MyOcean, is analyzed. This product is obtained by using two different bio-optical algorithms for open ocean (Case1) and coastal turbid (Case2) waters; this improves the quality of the Chl satellite estimates, especially near the coast. In order to verify the real capability of the this product for estimating Chl trend and for selecting the most appropriated statistical test to detect trend in the Mediterranean Sea, a comparison between OC and in situ data are carried out. In-situ Chl data are part of the European Environment Information and Observation Network (Eionet) of the European Environmental Agency (EEA). Four different statistical approaches to estimate trend have been selected and used to compare trend values obtained with in-situ and OC data. Results show that the best agreement between in-situ and OC trend is achieved using the Mann- Kendall test. The Mediterranean trend map obtained applying this test to the de-seasonalized OC time series shows that, in accordance with the results of many authors, the case 1 waters of Mediterranean sea are characterized by a negative trend. However, the most intense trend signals, both negative and positive, are found in case 2 waters in correspondence of the river deltas. These trend signals are frequently linked to the implementation or non-implementation of the legislation introduced to control the nutrient discharge into the sea from European rivers.

Automation of disbond detection in aircraft fuselage through thermal image processing

NASA Technical Reports Server (NTRS)

Prabhu, D. R.; Winfree, W. P.

1992-01-01

A procedure for interpreting thermal images obtained during the nondestructive evaluation of aircraft bonded joints is presented. The procedure operates on time-derivative thermal images and resulted in a disbond image with disbonds highlighted. The size of the 'black clusters' in the output disbond image is a quantitative measure of disbond size. The procedure is illustrated using simulation data as well as data obtained through experimental testing of fabricated samples and aircraft panels. Good results are obtained, and, except in pathological cases, 'false calls' in the cases studied appeared only as noise in the output disbond image which was easily filtered out. The thermal detection technique coupled with an automated image interpretation capability will be a very fast and effective method for inspecting bonded joints in an aircraft structure.

Wind-tunnel research comparing lateral control devices, particularly at high angles of attack II : slotted ailerons and frise ailerons

NASA Technical Reports Server (NTRS)

Weick, Fred E; Noyes, Richard W

1933-01-01

Three model wings, two with typical slotted ailerons and one with typical frise ailerons, have been tested as part of a general investigation on lateral control devices with particular reference to their effectiveness at high angles of attack, in the 7 by 10 foot wind tunnel of the National Advisory Committee for Aeronautics. Force tests, free-autorotation tests, and forced-rotation tests were made which show the effect of the various ailerons on the general performance of the wing, on the lateral controllability, and on the lateral stability, in general, rolling control at 20 degree angle of attack to plain ailerons of the same size. The adverse yawing moments obtained with the slotted and frise ailerons were, in most cases, slightly smaller than those obtained with plain ailerons of the same size and deflection. However, this improvement was small as compared to the improvement obtainable by the use of suitable differential movements with any of the ailerons, including the plain.

Data-Division-Specific Robustness and Power of Randomization Tests for ABAB Designs

ERIC Educational Resources Information Center

Manolov, Rumen; Solanas, Antonio; Bulte, Isis; Onghena, Patrick

2010-01-01

This study deals with the statistical properties of a randomization test applied to an ABAB design in cases where the desirable random assignment of the points of change in phase is not possible. To obtain information about each possible data division, the authors carried out a conditional Monte Carlo simulation with 100,000 samples for each…

Direct molecular testing to assess the incidence of meningococcal and other bacterial causes of meningitis among persons reported with unspecified bacterial meningitis.

PubMed

Ramautar, Arianne E; Halse, Tanya A; Arakaki, Lola; Antwi, Mike; Del Rosso, Paula; Dorsinville, Marie; Nazarian, Elizabeth; Steiner-Sichel, Linda; Lee, Lillian; Dickinson, Michelle; Wroblewski, Danielle; Dumas, Nellie; Musser, Kimberlee; Isaac, Beth; Rakeman, Jennifer; Weiss, Don

2015-11-01

Confirmed and probable cases of invasive Neisseria meningitidis (Nm) infection are reportable in New York City. We conducted a study to identify Nm among culture-negative reports of bacterial and viral meningitis. During the study period, 262 reports of suspected meningitis were eligible. Cerebrospinal fluid (CSF) specimens from 138 patients were obtained for testing. No Nm cases were detected. Results from real-time polymerase chain reaction and 16S on CSF specimens were concordant with hospital microbiology findings in 80%; however, other pathogenic organisms were detected in 14 culture-negative specimens. New York City's surveillance system appears to be effective at capturing cases of Nm meningitis. Nucleic acid testing is useful for detecting the presence of bacterial DNA when antibiotic therapy precedes lumbar puncture or bacterial cultures are negative. It remains unanswered whether culture-negative cases of Nm bacteremia are being missed by reportable disease surveillance. Copyright © 2015 Elsevier Inc. All rights reserved.

Supersonic CO electric-discharge lasers

NASA Technical Reports Server (NTRS)

Hason, R. K.; Mitchner, M.; Stanton, A.

1975-01-01

Laser modeling activity is described which involved addition of an option allowing N2 as a second diatomic gas. This option is now operational and a few test cases involving N2/CO mixtures were run. Results from these initial test cases are summarized. In the laboratory, a CW double-discharge test facility was constructed and tested. Features include: water-cooled removable electrodes, O-ring construction to facilitate cleaning and design modifications, increased discharge length, and addition of a post-discharge observation section. Preliminary tests with this facility using N2 yielded higher power loadings than obtained in the first-generation facility. Another test-section modification, recently made and as yet untested, will permit injection of secondary gases into the cathode boundary layer. The objective will be to vary and enhance the UV emission spectrum from the auxiliary discharge, thereby influencing the level of photoionization in the main discharge region.

Travel associated legionnaires' disease in Europe: 2003.

PubMed

Ricketts, K; Joseph, C

2004-10-01

Six hundred and thirty two cases of travel-associated legionnaires' disease with onset in 2003 were reported to the EWGLINET surveillance scheme by 24 countries. Eighty nine clusters were detected, 35 (39%) of which would not have been detected without the EWGLINET scheme. One hundred and seven accommodation sites were investigated and 22 sites were published on the EWGLI website. The proportion of cases diagnosed primarily by the urinary antigen test was 81.2%, and 48 positive cultures were obtained. Thirty eight deaths were reported to the EWGLINET scheme, giving a crude fatality rate of 6%. Countries are encouraged to inform the coordinating centre of cases that fall ill after travelling within their own country of residence ('internal travel'), and are also encouraged to obtain patient isolates for culture where at all possible.

A hierarchical Bayesian approach to adaptive vision testing: A case study with the contrast sensitivity function.

PubMed

Gu, Hairong; Kim, Woojae; Hou, Fang; Lesmes, Luis Andres; Pitt, Mark A; Lu, Zhong-Lin; Myung, Jay I

2016-01-01

Measurement efficiency is of concern when a large number of observations are required to obtain reliable estimates for parametric models of vision. The standard entropy-based Bayesian adaptive testing procedures addressed the issue by selecting the most informative stimulus in sequential experimental trials. Noninformative, diffuse priors were commonly used in those tests. Hierarchical adaptive design optimization (HADO; Kim, Pitt, Lu, Steyvers, & Myung, 2014) further improves the efficiency of the standard Bayesian adaptive testing procedures by constructing an informative prior using data from observers who have already participated in the experiment. The present study represents an empirical validation of HADO in estimating the human contrast sensitivity function. The results show that HADO significantly improves the accuracy and precision of parameter estimates, and therefore requires many fewer observations to obtain reliable inference about contrast sensitivity, compared to the method of quick contrast sensitivity function (Lesmes, Lu, Baek, & Albright, 2010), which uses the standard Bayesian procedure. The improvement with HADO was maintained even when the prior was constructed from heterogeneous populations or a relatively small number of observers. These results of this case study support the conclusion that HADO can be used in Bayesian adaptive testing by replacing noninformative, diffuse priors with statistically justified informative priors without introducing unwanted bias.

A hierarchical Bayesian approach to adaptive vision testing: A case study with the contrast sensitivity function

PubMed Central

Gu, Hairong; Kim, Woojae; Hou, Fang; Lesmes, Luis Andres; Pitt, Mark A.; Lu, Zhong-Lin; Myung, Jay I.

2016-01-01

Measurement efficiency is of concern when a large number of observations are required to obtain reliable estimates for parametric models of vision. The standard entropy-based Bayesian adaptive testing procedures addressed the issue by selecting the most informative stimulus in sequential experimental trials. Noninformative, diffuse priors were commonly used in those tests. Hierarchical adaptive design optimization (HADO; Kim, Pitt, Lu, Steyvers, & Myung, 2014) further improves the efficiency of the standard Bayesian adaptive testing procedures by constructing an informative prior using data from observers who have already participated in the experiment. The present study represents an empirical validation of HADO in estimating the human contrast sensitivity function. The results show that HADO significantly improves the accuracy and precision of parameter estimates, and therefore requires many fewer observations to obtain reliable inference about contrast sensitivity, compared to the method of quick contrast sensitivity function (Lesmes, Lu, Baek, & Albright, 2010), which uses the standard Bayesian procedure. The improvement with HADO was maintained even when the prior was constructed from heterogeneous populations or a relatively small number of observers. These results of this case study support the conclusion that HADO can be used in Bayesian adaptive testing by replacing noninformative, diffuse priors with statistically justified informative priors without introducing unwanted bias. PMID:27105061

Empirical evaluation of the market price of risk using the CIR model

NASA Astrophysics Data System (ADS)

Bernaschi, M.; Torosantucci, L.; Uboldi, A.

2007-03-01

We describe a simple but effective method for the estimation of the market price of risk. The basic idea is to compare the results obtained by following two different approaches in the application of the Cox-Ingersoll-Ross (CIR) model. In the first case, we apply the non-linear least squares method to cross sectional data (i.e., all rates of a single day). In the second case, we consider the short rate obtained by means of the first procedure as a proxy of the real market short rate. Starting from this new proxy, we evaluate the parameters of the CIR model by means of martingale estimation techniques. The estimate of the market price of risk is provided by comparing results obtained with these two techniques, since this approach makes possible to isolate the market price of risk and evaluate, under the Local Expectations Hypothesis, the risk premium given by the market for different maturities. As a test case, we apply the method to data of the European Fixed Income Market.

[Psychic factors in case histories of patients with alopecia areata--preliminary report].

PubMed

Wygledowska-Kania, M; Bogdanowski, T

1996-01-01

We tested the significance of psychic factors in the etiopathogenesis of alopecia areata. We analysed the patient on the basis of a detailed examination based on the case history, including important events in his/her life, personality traits, serious events and the loss of emotional attachment. General important events happened to 80% of the patients, personality traits able to cause the disease were present in 73%, serious events in 62% and the loss of emotional attachment was also found in 62% of the patients. We tested 60 patients (31 women and 29 men). The evidence obtained from the detailed examination based on case histories indicated significantly frequent occurrence of the psychic factors preceding the occurrence of alopecia areata.

Evaluation of Visual Pedagogy in Dental Check-ups and Preventive Practices Among 6-12-Year-Old Children with Autism.

PubMed

Nilchian, Firoozeh; Shakibaei, Fereshteh; Jarah, Zeinab Taghi

2017-03-01

This study was aimed to evaluate the impact of visual pedagogy in dental check-ups and preventive practices among children with autism aged 6-12. In this randomized double-blind clinical trial, the cooperation of 40 children with autism age 6-12. The selected children were equally divided into two groups of case and control (n = 20). The obtained data were analyzed by statistical tests, including Chi square and independent t test. The results of Cochran showed a significant increase in children's cooperation with regard to fluoride therapy in the case group by repeating the visit and training sessions (p ≤ 0.001). The findings of this study demonstrated, visual pedagogy was merely effective in the case of fluoride therapy in the case group.

Ureter Regeneration–The Proper Scaffold Has to Be Defined

PubMed Central

Kowalczyk, Tomasz; Nowacki, Maciej; Bodnar, Magdalena; Marszałek, Andrzej; Pokrywczyńska, Marta; Frontczak-Baniewicz, Małgorzata; Kowalewski, Tomasz A.; Chłosta, Piotr; Drewa, Tomasz

2014-01-01

The aim of this study was to compare two different acellular scaffolds: natural and synthetic, for urinary conduit construction and ureter segment reconstruction. Acellular aortic arch (AAM) and poly(L-lactide-co-caprolactone) (PLCL) were used in 24 rats for ureter reconstruction in both tested groups. Follow-up period was 4 weeks. Intravenous pyelography, histological and immunohistochemical analysis were performed. All animals survived surgical procedures. Patent uretero-conduit junction was observed only in one case using PLCL. In case of ureter segment reconstruction ureters were patent in one case using AAM and in four cases using PLCL scaffolds. Regeneration of urothelium layer and focal regeneration of smooth muscle layer was observed on both tested scaffolds. Obtained results indicates that synthetic acellular PLCL scaffolds showed better properties for ureter reconstruction than naturally derived acellular aortic arch. PMID:25162415

Optimization applications in aircraft engine design and test

NASA Technical Reports Server (NTRS)

Pratt, T. K.

1984-01-01

Starting with the NASA-sponsored STAEBL program, optimization methods based primarily upon the versatile program COPES/CONMIN were introduced over the past few years to a broad spectrum of engineering problems in structural optimization, engine design, engine test, and more recently, manufacturing processes. By automating design and testing processes, many repetitive and costly trade-off studies have been replaced by optimization procedures. Rather than taking engineers and designers out of the loop, optimization has, in fact, put them more in control by providing sophisticated search techniques. The ultimate decision whether to accept or reject an optimal feasible design still rests with the analyst. Feedback obtained from this decision process has been invaluable since it can be incorporated into the optimization procedure to make it more intelligent. On several occasions, optimization procedures have produced novel designs, such as the nonsymmetric placement of rotor case stiffener rings, not anticipated by engineering designers. In another case, a particularly difficult resonance contraint could not be satisfied using hand iterations for a compressor blade, when the STAEBL program was applied to the problem, a feasible solution was obtained in just two iterations.

Hyperspectral Shack–Hartmann test

PubMed Central

Birch, Gabriel C.; Descour, Michael R.; Tkaczyk, Tomasz S.

2011-01-01

A hyperspectral Shack–Hartmann test bed has been developed to characterize the performance of miniature optics across a wide spectral range, a necessary first step in developing broadband achromatized all-polymer endomicroscopes. The Shack–Hartmann test bed was used to measure the chromatic focal shift (CFS) of a glass singlet lens and a glass achromatic lens, i.e., lenses representing the extrema of CFS magnitude in polymer elements to be found in endomicroscope systems. The lenses were tested from 500 to 700 nm in 5 and 10 nm steps, respectively. In both cases, we found close agreement between test results obtained from a ZEMAX model of the test bed and test lens and those obtained by experiment (maximum error of 12 μm for the singlet lens and 5 μm for the achromatic triplet lens). Future applications of the hyperspectral Shack–Hartmann test include measurements of aberrations as a function of wavelength, characterization of manufactured plastic endomicroscope elements and systems, and reverse optimization. PMID:20885478

Lightning tests and analyses of tunnel bond straps and shielded cables on the Space Shuttle solid rocket booster

NASA Technical Reports Server (NTRS)

Druen, William M.

1993-01-01

The purposes of the tests and analyses described in this report are as follows: (1) determine the lightning current survivability of five alternative changed designs of the bond straps which electrically bond the solid rocket booster (SRB) systems tunnel to the solid rocket motor (SRM) case; (2) determine the amount of reduction in induced voltages on operational flight (OF) tunnel cables obtained by a modified design of tunnel bond straps (both tunnel cover-to-cover and cover-to-motor case); (3) determine the contribution of coupling to the OF tunnel cables by ground electrical and instrumentation (GEI) cables which enter the systems tunnel from unshielded areas on the surfaces of the motor case; and (4) develop a model (based on test data) and calculate the voltage levels at electronic 'black boxes' connected to the OF cables that run in the systems tunnel.

[Laboratory diagnostics and monitoring of virus circulation in surveillance system for rubella in Belarus].

PubMed

Samoĭlovich, E O; Semeĭko, G V; Ermolovich, M A; Svirchevskaia, E Iu

2010-01-01

To summarize data on laboratory diagnostics of prenatal and postnatal rubella and molecular monitoring of rubella virus circulation in Belarus obtained during implementation of rubella elimination program. Serum samples from 2314 persons were tested on the presence of IgM to rubella virus and measles virus (in case of negative result on rubella) using respective enzyme immunoassays. Virological testing using RT-PCR as well as genotyping on the basis of E1 gene fragment sequencing were also performed. Two viruses isolated in Belarus were set as reference strains of genotypes 1G and 1h. Implementation of laboratory diagnostics allowed to differentiate cases of rubella from other exanthematous infections, significantly increase the number of laboratory-confirmed cases among all reported cases, and show presence of endemic circulation of rubella virus strains of 3 different genotypes (1G, 1E, and 1h) in Belarus (2004-2006). In 2006, when relatively high incidence of rubella was reported in the country (24.39 per 100,000 population), the risk of congenital rubella syndrome was not less than 9 per 100,000 births. Conducted in October 2005-May 2006 additional rounds of immunization against rubella (>1 million people were vaccinated) decreased incidence to single cases. Obtained data show achievability of indigenous rubella elemination by 2010. Revealed genetic diversity of rubella virus strains allowed to update the International classification of wild rubella viruses.

Transonic Drag Prediction Using an Unstructured Multigrid Solver

NASA Technical Reports Server (NTRS)

Mavriplis, D. J.; Levy, David W.

2001-01-01

This paper summarizes the results obtained with the NSU-3D unstructured multigrid solver for the AIAA Drag Prediction Workshop held in Anaheim, CA, June 2001. The test case for the workshop consists of a wing-body configuration at transonic flow conditions. Flow analyses for a complete test matrix of lift coefficient values and Mach numbers at a constant Reynolds number are performed, thus producing a set of drag polars and drag rise curves which are compared with experimental data. Results were obtained independently by both authors using an identical baseline grid and different refined grids. Most cases were run in parallel on commodity cluster-type machines while the largest cases were run on an SGI Origin machine using 128 processors. The objective of this paper is to study the accuracy of the subject unstructured grid solver for predicting drag in the transonic cruise regime, to assess the efficiency of the method in terms of convergence, cpu time, and memory, and to determine the effects of grid resolution on this predictive ability and its computational efficiency. A good predictive ability is demonstrated over a wide range of conditions, although accuracy was found to degrade for cases at higher Mach numbers and lift values where increasing amounts of flow separation occur. The ability to rapidly compute large numbers of cases at varying flow conditions using an unstructured solver on inexpensive clusters of commodity computers is also demonstrated.

Palatini formulation of f( R, T) gravity theory, and its cosmological implications

NASA Astrophysics Data System (ADS)

Wu, Jimin; Li, Guangjie; Harko, Tiberiu; Liang, Shi-Dong

2018-05-01

We consider the Palatini formulation of f( R, T) gravity theory, in which a non-minimal coupling between the Ricci scalar and the trace of the energy-momentum tensor is introduced, by considering the metric and the affine connection as independent field variables. The field equations and the equations of motion for massive test particles are derived, and we show that the independent connection can be expressed as the Levi-Civita connection of an auxiliary, energy-momentum trace dependent metric, related to the physical metric by a conformal transformation. Similar to the metric case, the field equations impose the non-conservation of the energy-momentum tensor. We obtain the explicit form of the equations of motion for massive test particles in the case of a perfect fluid, and the expression of the extra force, which is identical to the one obtained in the metric case. The thermodynamic interpretation of the theory is also briefly discussed. We investigate in detail the cosmological implications of the theory, and we obtain the generalized Friedmann equations of the f( R, T) gravity in the Palatini formulation. Cosmological models with Lagrangians of the type f=R-α ^2/R+g(T) and f=R+α ^2R^2+g(T) are investigated. These models lead to evolution equations whose solutions describe accelerating Universes at late times.

Prediction of Welded Joint Strength in Plasma Arc Welding: A Comparative Study Using Back-Propagation and Radial Basis Neural Networks

NASA Astrophysics Data System (ADS)

Srinivas, Kadivendi; Vundavilli, Pandu R.; Manzoor Hussain, M.; Saiteja, M.

2016-09-01

Welding input parameters such as current, gas flow rate and torch angle play a significant role in determination of qualitative mechanical properties of weld joint. Traditionally, it is necessary to determine the weld input parameters for every new welded product to obtain a quality weld joint which is time consuming. In the present work, the effect of plasma arc welding parameters on mild steel was studied using a neural network approach. To obtain a response equation that governs the input-output relationships, conventional regression analysis was also performed. The experimental data was constructed based on Taguchi design and the training data required for neural networks were randomly generated, by varying the input variables within their respective ranges. The responses were calculated for each combination of input variables by using the response equations obtained through the conventional regression analysis. The performances in Levenberg-Marquardt back propagation neural network and radial basis neural network (RBNN) were compared on various randomly generated test cases, which are different from the training cases. From the results, it is interesting to note that for the above said test cases RBNN analysis gave improved training results compared to that of feed forward back propagation neural network analysis. Also, RBNN analysis proved a pattern of increasing performance as the data points moved away from the initial input values.

Initial experience with non-invasive prenatal testing of cell-free DNA for major chromosomal anomalies in a clinical setting.

PubMed

Comas, Carmina; Echevarria, Mónica; Rodríguez, M Angeles; Prats, Pilar; Rodríguez, Ignacio; Serra, Bernat

2015-07-01

To evaluate non-invasive prenatal testing (NIPT) of cell-free DNA (cfDNA) as a screening method for major chromosomal anomalies (CA) in a clinical setting. From January to December 2013, Panorama™ test or Harmony™ prenatal test were offered as advanced NIPT, in addition to first-trimester combined screening in singleton pregnancies. The cohort included 333 pregnant women with a mean maternal age (MA) of 37 years who underwent testing at a mean gestational age of 14.6 weeks. Eighty-four percent were low-risk pregnancies. Results were provided in 97.3% of patients at a mean reporting time of 12.9 calendar days. Repeat sampling was performed in six cases and results were obtained in five of them. No results were provided in four cases. Four cases of Down syndrome were detected and there was one discordant result of Turner syndrome. We found no statistical differences between commercial tests except in reporting time, fetal fraction and MA. The cfDNA fraction was statistically associated with test type, maternal weight, BMI and log βhCG levels. NIPT has the potential to be a highly effective screening method for major CA in a clinical setting.

Sociopathic Knowledge Bases: Correct Knowledge Can Be Harmful Even Given Unlimited Computation

DTIC Science & Technology

1989-08-01

pobitive, as false positives generated by a medical program can often be caught by a physician upon further testing . False negatives, however, may be...improvement over the knowledge base tested is obtained. Although our work is pretty much theoretical research oriented one example of ex- periments is...knowledge base, improves the performance by about 10%. of tests . First, we divide the cases into a training set and a validation set with 70% vs. 30% each

Farmers' beliefs about bovine tuberculosis control in Northern Ireland.

PubMed

O'Hagan, M J H; Matthews, D I; Laird, C; McDowell, S W J

2016-06-01

Beliefs can play an important role in farmer behaviour and willingness to adopt new policies. In Northern Ireland, bovine tuberculosis (bTB) is one of the most important endemic diseases facing the cattle industry. An observational study was conducted on 192 farms in a high bTB incidence area during 2010-2011 in order to obtain a better understanding of farmers' beliefs in relation to bTB control. The views of farmers who had experienced a recent confirmed or multiple reactor bTB breakdowns (cases) were compared to those of farmers who had no recent reactors or restricted herd tests (controls). Data were obtained from a face-to-face questionnaire assessing farmers' agreement to 22 statements. All participating farmers found bTB control important and most were keen to learn more about bTB biosecurity measures and were in favour of the cattle-related bTB control measures as presented in the questionnaire (isolation of skin test inconclusive animals, use of the gamma-interferon test and pre-movement testing). The majority of farmers would allow badger vaccination and culling on their own land with an overall preference for vaccination. Highest disagreement was shown for the statements querying a willingness to pay for bTB control measures. There was agreement on most issues between case and control farmers and between different age groups of farmers although case farmers showed more support for additional advice on bTB biosecurity measures (P = 0.042). Case farmers were also more in favour of allowing badger vaccination (P = 0.008) and culling (P = 0.043) on their land and showed less concern for public opposition (P = 0.048). Copyright © 2015 Elsevier Ltd. All rights reserved.

Wall interference correction improvements for the ONERA main wind tunnels

NASA Technical Reports Server (NTRS)

Vaucheret, X.

1982-01-01

This paper describes improved methods of calculating wall interference corrections for the ONERA large windtunnels. The mathematical description of the model and its sting support have become more sophisticated. An increasing number of singularities is used until an agreement between theoretical and experimental signatures of the model and sting on the walls of the closed test section is obtained. The singularity decentering effects are calculated when the model reaches large angles of attack. The porosity factor cartography on the perforated walls deduced from the measured signatures now replaces the reference tests previously carried out in larger tunnels. The porosity factors obtained from the blockage terms (signatures at zero lift) and from the lift terms are in good agreement. In each case (model + sting + test section), wall corrections are now determined, before the tests, as a function of the fundamental parameters M, CS, CZ. During the windtunnel tests, the corrections are quickly computed from these functions.

Yield and Pitfalls of Ajmaline Testing in the Evaluation of Unexplained Cardiac Arrest and Sudden Unexplained Death: Single-Center Experience With 482 Families.

PubMed

Tadros, Rafik; Nannenberg, Eline A; Lieve, Krystien V; Škorić-Milosavljević, Doris; Lahrouchi, Najim; Lekanne Deprez, Ronald H; Vendrik, Jeroen; Reckman, Yolan J; Postema, Pieter G; Amin, Ahmad S; Bezzina, Connie R; Wilde, Arthur A M; Tan, Hanno L

2017-12-11

This study evaluated the yield of ajmaline testing and assessed the occurrence of confounding responses in a large cohort of families with unexplained cardiac arrest (UCA) or sudden unexplained death (SUD). Ajmaline testing to diagnose Brugada syndrome (BrS) is routinely used in the evaluation of SUD and UCA, but its yield, limitations, and appropriate dosing have not been studied in a large cohort. We assessed ajmaline test response and genetic testing results in 637 individuals from 482 families who underwent ajmaline testing for SUD or UCA. Overall, 89 individuals (14%) from 88 families (18%) had a positive ajmaline test result. SCN5A mutations were identified in 9 of 86 ajmaline-positive cases (10%). SCN5A mutation carriers had positive test results at significantly lower ajmaline doses than noncarriers (0.75 [range: 0.64 to 0.98] mg/kg vs. 1.03 [range: 0.95 to 1.14] mg/kg, respectively; p < 0.01). In 7 of 88 families (8%), it was concluded that the positive ajmaline response was a confounder, either in the presence of an alternative genetic diagnosis accounting for UCA/SUD (5 cases) or noncosegregation of positive ajmaline response and arrhythmia (2 cases). The rate of confounding responses was significantly higher in positive ajmaline responses obtained at >1 mg/kg than in those obtained at ≤1 mg/kg (7 of 48 vs. 0 of 41 individuals; Fisher's exact test: p = 0.014). In line with previous, smaller studies, a positive ajmaline response was observed in a large proportion of UCA/SUD families. Importantly, our data emphasize the potential for confounding possibly false-positive ajmaline responses in this population, particularly at high doses, which could possibly lead to a misdiagnosis. Clinicians should consider all alternative causes in UCA/SUD and avoid ajmaline doses >1 mg/kg. Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Continuous relaxation and retardation spectrum method for viscoelastic characterization of asphalt concrete

NASA Astrophysics Data System (ADS)

Bhattacharjee, Sudip; Swamy, Aravind Krishna; Daniel, Jo S.

2012-08-01

This paper presents a simple and practical approach to obtain the continuous relaxation and retardation spectra of asphalt concrete directly from the complex (dynamic) modulus test data. The spectra thus obtained are continuous functions of relaxation and retardation time. The major advantage of this method is that the continuous form is directly obtained from the master curves which are readily available from the standard characterization tests of linearly viscoelastic behavior of asphalt concrete. The continuous spectrum method offers efficient alternative to the numerical computation of discrete spectra and can be easily used for modeling viscoelastic behavior. In this research, asphalt concrete specimens have been tested for linearly viscoelastic characterization. The linearly viscoelastic test data have been used to develop storage modulus and storage compliance master curves. The continuous spectra are obtained from the fitted sigmoid function of the master curves via the inverse integral transform. The continuous spectra are shown to be the limiting case of the discrete distributions. The continuous spectra and the time-domain viscoelastic functions (relaxation modulus and creep compliance) computed from the spectra matched very well with the approximate solutions. It is observed that the shape of the spectra is dependent on the master curve parameters. The continuous spectra thus obtained can easily be implemented in material mix design process. Prony-series coefficients can be easily obtained from the continuous spectra and used in numerical analysis such as finite element analysis.

Developing a quality by design approach to model tablet dissolution testing: an industrial case study.

PubMed

Yekpe, Ketsia; Abatzoglou, Nicolas; Bataille, Bernard; Gosselin, Ryan; Sharkawi, Tahmer; Simard, Jean-Sébastien; Cournoyer, Antoine

2018-07-01

This study applied the concept of Quality by Design (QbD) to tablet dissolution. Its goal was to propose a quality control strategy to model dissolution testing of solid oral dose products according to International Conference on Harmonization guidelines. The methodology involved the following three steps: (1) a risk analysis to identify the material- and process-related parameters impacting the critical quality attributes of dissolution testing, (2) an experimental design to evaluate the influence of design factors (attributes and parameters selected by risk analysis) on dissolution testing, and (3) an investigation of the relationship between design factors and dissolution profiles. Results show that (a) in the case studied, the two parameters impacting dissolution kinetics are active pharmaceutical ingredient particle size distributions and tablet hardness and (b) these two parameters could be monitored with PAT tools to predict dissolution profiles. Moreover, based on the results obtained, modeling dissolution is possible. The practicality and effectiveness of the QbD approach were demonstrated through this industrial case study. Implementing such an approach systematically in industrial pharmaceutical production would reduce the need for tablet dissolution testing.

Remote control missile model test

NASA Technical Reports Server (NTRS)

Allen, Jerry M.; Shaw, David S.; Sawyer, Wallace C.

1989-01-01

An extremely large, systematic, axisymmetric body/tail fin data base was gathered through tests of an innovative missile model design which is described herein. These data were originally obtained for incorporation into a missile aerodynamics code based on engineering methods (Program MISSILE3), but can also be used as diagnostic test cases for developing computational methods because of the individual-fin data included in the data base. Detailed analysis of four sample cases from these data are presented to illustrate interesting individual-fin force and moment trends. These samples quantitatively show how bow shock, fin orientation, fin deflection, and body vortices can produce strong, unusual, and computationally challenging effects on individual fin loads. Comparisons between these data and calculations from the SWINT Euler code are also presented.

Estimation of tunnel blockage from wall pressure signatures: A review and data correlation

NASA Technical Reports Server (NTRS)

Hackett, J. E.; Wilsden, D. J.; Lilley, D. E.

1979-01-01

A method is described for estimating low speed wind tunnel blockage, including model volume, bubble separation and viscous wake effects. A tunnel-centerline, source/sink distribution is derived from measured wall pressure signatures using fast algorithms to solve the inverse problem in three dimensions. Blockage may then be computed throughout the test volume. Correlations using scaled models or tests in two tunnels were made in all cases. In many cases model reference area exceeded 10% of the tunnel cross-sectional area. Good correlations were obtained regarding model surface pressures, lift drag and pitching moment. It is shown that blockage-induced velocity variations across the test section are relatively unimportant but axial gradients should be considered when model size is determined.

[Serological diagnosis of dengue and yellow fever infections in suspected cases from Pará State, Brazil, 1999].

PubMed

de Araújo, Tais Pinheiro; Rodrigues, Sueli Guerreiro; Costa, Maria Irene Weyl de A; Vasconcelos, Pedro Fernando da Costa; da Rosa, Amélia P A Travassos

2002-01-01

From June to December 1999, 785 serum samples were obtained from patients clinically suspected of having dengue or yellow fever. The patients were referred by public health centers distributed within the six mesoregions of Par State, Brazil. Serum samples were tested for Flavivirus antibodies by hemagglutination inhibition test and for dengue and yellow fever viruses by enzyme-linked immunosorbent assay for IgM detection. Of the sera collected, 563 (71.7%) were positive by HI test and out of these 150 (26.6%) were positive by ELISA-IgM. Dengue virus was responsible for most of the recent infections in all regions; yellow fever cases detected in the current study were restricted to the Maraj and Southeast regions.

The role of Leptospira spp. in horses affected with recurrent uveitis in the UK.

PubMed

Malalana, F; Blundell, R J; Pinchbeck, G L; Mcgowan, C M

2017-11-01

Equine recurrent uveitis (ERU) is a common cause of ocular pain and blindness in horses. Leptospira spp. have been commonly implicated in the pathophysiology of ERU in mainland Europe and the USA. No recent studies have been carried out in the UK, but Leptospira is reported not to be a major factor in the aetiology of ERU in the UK. To establish the prevalence of Leptospira-associated ERU in the UK and to identify the serovars involved in these cases; to compare serum vs. aqueous humour antibody levels in cases and controls in order to confirm the diagnosis of Leptospira-associated ERU, and to assess the usefulness of serology alone as a confirmatory test for Leptospira-associated ERU in the UK. Case-control study. Eyes enucleated for clinical reasons in ERU-affected horses were collected. Blood and aqueous humour were obtained to determine antibody levels against a variety of Leptospira serovars and C-values (aqueous humour value/serum value) were calculated. In addition, eyes, blood and aqueous humour were obtained from control cases for comparison. Histopathology was performed in all eyes to confirm uveitis in each case. Differences in seroprevalences between ERU and control cases and between Leptospira- and non-Leptospira-associated ERU cases were calculated. A total of 30 ERU and 43 control eyes were analysed. Of the ERU eyes, only two had a C-value of >4 (prevalence of Leptospira-associated uveitis: 6.7%). Serovars hardjo and javanica were detected. There was no difference in seroprevalence between horses with uveitis and control cases (65.5% and 41.9%, respectively; P = 0.11) or between Leptospira- and non-Leptospira-associated uveitis cases (100% and 63.0%, respectively; P = 0.52). The study was limited by low case numbers. Eyes were presented at different stages of disease. The only test used to detect Leptospira was the microscopic agglutination test. Leptospira-associated ERU is uncommon in the UK. Serology alone may not help to definitively diagnose Leptospira-associated uveitis in this country. © 2017 The Authors. Equine Veterinary Journal published by John Wiley & Sons Ltd on behalf of EVJ Ltd.

Analysis of pumping tests of partially penetrating wells in an unconfined aquifer using inverse numerical optimization

NASA Astrophysics Data System (ADS)

Hvilshøj, S.; Jensen, K. H.; Barlebo, H. C.; Madsen, B.

1999-08-01

Inverse numerical modeling was applied to analyze pumping tests of partially penetrating wells carried out in three wells established in an unconfined aquifer in Vejen, Denmark, where extensive field investigations had previously been carried out, including tracer tests, mini-slug tests, and other hydraulic tests. Drawdown data from multiple piezometers located at various horizontal and vertical distances from the pumping well were included in the optimization. Horizontal and vertical hydraulic conductivities, specific storage, and specific yield were estimated, assuming that the aquifer was either a homogeneous system with vertical anisotropy or composed of two or three layers of different hydraulic properties. In two out of three cases, a more accurate interpretation was obtained for a multi-layer model defined on the basis of lithostratigraphic information obtained from geological descriptions of sediment samples, gammalogs, and flow-meter tests. Analysis of the pumping tests resulted in values for horizontal hydraulic conductivities that are in good accordance with those obtained from slug tests and mini-slug tests. Besides the horizontal hydraulic conductivity, it is possible to determine the vertical hydraulic conductivity, specific yield, and specific storage based on a pumping test of a partially penetrating well. The study demonstrates that pumping tests of partially penetrating wells can be analyzed using inverse numerical models. The model used in the study was a finite-element flow model combined with a non-linear regression model. Such a model can accommodate more geological information and complex boundary conditions, and the parameter-estimation procedure can be formalized to obtain optimum estimates of hydraulic parameters and their standard deviations.

Dose-response relationships in a microneutralization test for foot-and-mouth disease viruses.

PubMed Central

Booth, J. C.; Rweyemamu, M. M.; Pay, T. W.

1978-01-01

Two-dimensional quantal microneutralization tests on foot-and-mouth disease viruses, in which neutralizing antibody activity was titrated against a serial range of virus doses, demonstrated a variety of dose-response curves some of which were rectilinear, others clearly curvilinear. Moreover, in the case of the non-linear responses obtained with some antisera, the shape of the curve was such that antibody titres recorded with doses of virus ranging from 10(3)-10(5) TCD50 were closely similar. Studies were carried out on the effect of varying the conditions of the test on the shape of the dose-response curve: significant differences were obtained after treatment of the antiserum-virus mixtures with anti-species globulin, and when the test was assayed in cells of differing susceptibility to infection. PMID:202650

Screening for Babesia microti in the U.S. Blood Supply.

PubMed

Moritz, Erin D; Winton, Colleen S; Tonnetti, Laura; Townsend, Rebecca L; Berardi, Victor P; Hewins, Mary-Ellen; Weeks, Karen E; Dodd, Roger Y; Stramer, Susan L

2016-12-08

Babesia microti, a tickborne intraerythrocytic parasite that can be transmitted by means of blood transfusion, is responsible for the majority of cases of transfusion-transmitted babesiosis in the United States. However, no licensed test exists for screening for B. microti in donated blood. We assessed data from a large-scale, investigational product-release screening and donor follow-up program. From June 2012 through September 2014, we performed arrayed fluorescence immunoassays (AFIAs) for B. microti antibodies and real-time polymerase-chain-reaction (PCR) assays for B. microti DNA on blood-donation samples obtained in Connecticut, Massachusetts, Minnesota, and Wisconsin. We determined parasite loads with the use of quantitative PCR testing and assessed infectivity by means of the inoculation of hamsters and the subsequent examination for parasitemia. Donors with test-reactive samples were followed. Using data on cases of transfusion-transmitted babesiosis, we compared the proportions of screened versus unscreened donations that were infectious. Of 89,153 blood-donation samples tested, 335 (0.38%) were confirmed to be positive, of which 67 (20%) were PCR-positive; 9 samples were antibody-negative (i.e., 1 antibody-negative sample per 9906 screened samples), representing 13% of all PCR-positive samples. PCR-positive samples were identified all through the year; antibody-negative infections occurred from June through September. Approximately one third of the red-cell samples from PCR-positive or high-titer AFIA-positive donations infected hamsters. Follow-up showed DNA clearance in 86% of the donors but antibody seroreversion in 8% after 1 year. In Connecticut and Massachusetts, no reported cases of transfusion-transmitted babesiosis were associated with screened donations (i.e., 0 cases per 75,331 screened donations), as compared with 14 cases per 253,031 unscreened donations (i.e., 1 case per 18,074 unscreened donations) (odds ratio, 8.6; 95% confidence interval, 0.51 to 144; P=0.05). Overall, 29 cases of transfusion-transmitted babesiosis were linked to blood from infected donors, including blood obtained from 10 donors whose samples tested positive on the PCR assay 2 to 7 months after the implicated donation. Blood-donation screening for antibodies to and DNA from B. microti was associated with a decrease in the risk of transfusion-transmitted babesiosis. (Funded by the American Red Cross and Imugen; ClinicalTrials.gov number, NCT01528449 .).

Evaluation of PDA Technical Report No 33. Statistical Testing Recommendations for a Rapid Microbiological Method Case Study.

PubMed

Murphy, Thomas; Schwedock, Julie; Nguyen, Kham; Mills, Anna; Jones, David

2015-01-01

New recommendations for the validation of rapid microbiological methods have been included in the revised Technical Report 33 release from the PDA. The changes include a more comprehensive review of the statistical methods to be used to analyze data obtained during validation. This case study applies those statistical methods to accuracy, precision, ruggedness, and equivalence data obtained using a rapid microbiological methods system being evaluated for water bioburden testing. Results presented demonstrate that the statistical methods described in the PDA Technical Report 33 chapter can all be successfully applied to the rapid microbiological method data sets and gave the same interpretation for equivalence to the standard method. The rapid microbiological method was in general able to pass the requirements of PDA Technical Report 33, though the study shows that there can be occasional outlying results and that caution should be used when applying statistical methods to low average colony-forming unit values. Prior to use in a quality-controlled environment, any new method or technology has to be shown to work as designed by the manufacturer for the purpose required. For new rapid microbiological methods that detect and enumerate contaminating microorganisms, additional recommendations have been provided in the revised PDA Technical Report No. 33. The changes include a more comprehensive review of the statistical methods to be used to analyze data obtained during validation. This paper applies those statistical methods to analyze accuracy, precision, ruggedness, and equivalence data obtained using a rapid microbiological method system being validated for water bioburden testing. The case study demonstrates that the statistical methods described in the PDA Technical Report No. 33 chapter can be successfully applied to rapid microbiological method data sets and give the same comparability results for similarity or difference as the standard method. © PDA, Inc. 2015.

Collagen-chitosan scaffold - Lauric acid plasticizer for skin tissue engineering on burn cases

NASA Astrophysics Data System (ADS)

Widiyanti, Prihartini; Setyadi, Ewing Dian; Rudyardjo, Djony Izak

2017-02-01

The prevalence of burns in the world is more than 800 cases per one million people each year and this is the second highest cause of death due to trauma after traffic accident. Many studies are turning to skin substitute methods of tissue engineering. The purpose of this study is to determine the composition of the collagen, chitosan, and lauric acid scaffold, as well as knowing the results of the characterization of the scaffold. The synthesis of chitosan collagen lauric acid scaffold as a skin tissue was engineered using freeze dried method. Results from making of collagen chitosan lauric acid scaffold was characterized physically, biologically and mechanically by SEM, cytotoxicity, biodegradation, and tensile strength. From the morphology test, the result obtained is that pore diameter size ranges from 94.11 to 140.1 µm for samples A,B,C,D, which are in the range of normal pore size 63-150 µm, while sample E has value below the standard which is about 37.87 to 47.36 µm. From cytotoxicity assay, the result obtained is the percentage value of living cells between 20.11 to 21.51%. This value is below 50% the standard value of living cells. Incompatibility is made possible because of human error mainly the replication of washing process over the standard. Degradation testing obtained values of 19.44% - 40% by weight which are degraded during the 7 days of observation. Tensile test results obtained a range of values of 0.192 - 3.53 MPa. Only sample A (3.53 MPa) and B (1.935 MPa) meet the standard values of skin tissue scaffold that is 1-24 MPa. Based on the results of the characteristics of this study, composite chitosan collagen scaffold with lauric acid plasticizer has a potential candidate for skin tissue engineering for skin burns cases.

Affirm VPIII microbial identification test can be used to detect gardnerella vaginalis, Candida albicans and trichomonas vaginalis microbial infections in Korean women.

PubMed

Byun, Seung Won; Park, Yeon Joon; Hur, Soo Young

2016-04-01

The aim of this study was to compare Affirm VPIII Microbial Identification Test results for Korean women to those obtained for Gardnerella vaginalis through Nugent score, Candida albicans based on vaginal culture and Trichomonas vaginalis based on wet smear diagnostic standards. Study participants included 195 women with symptomatic or asymptomatic vulvovaginitis under hospital obstetric or gynecologic care. A definite diagnosis was made based on Nugent score for Gardnerella, vaginal culture for Candida and wet prep for Trichomonas vaginalis. Affirm VPIII Microbial Identification Test results were then compared to diagnostic standard results. Of the 195 participants, 152 were symptomatic, while 43 were asymptomatic. Final diagnosis revealed 68 (37.87%) cases of Gardnerella, 29 (14.87%) cases of Candida, one (0.51%) case of Trichomonas, and 10 (5.10%) cases of mixed infections. The detection rates achieved by each detection method (Affirm assay vs diagnostic standard) for Gardnerella and Candida were not significantly different (33.33% vs 34.8% for Gardnerella, 13.33% vs 14.87% for Candida, respectively). The sensitivity and specificity of the Affirm test for Gardnerella compared to the diagnostic standard were 75.0% and 88.98%, respectively. For Candida, the sensitivity and specificity of the Affirm test compared to the diagnostic standard were 82.76% and 98.80%, respectively. The number of Trichomonas cases was too small (1 case) to be statistically analyzed. The Affirm test is a quick tool that can help physicians diagnose and treat patients with infectious vaginitis at the point of care. © 2016 Japan Society of Obstetrics and Gynecology.

Impacts of freight parking policies in urban areas : the case of New York City.

DOT National Transportation Integrated Search

2016-06-01

The research has tested several policy scenarios, and the practical implications of parking supply management is : discussed. The results obtained help provide a better understanding of the need of freight parking and the policy : alternatives availa...

The flow field of an underexpanded H2 jet coaxially injected into a hot free or ducted supersonic jet of air or nitrogen

NASA Technical Reports Server (NTRS)

Jenkins, R. V.

1977-01-01

Experimental data obtained in an investigation of the mixing of an underexpanded hydrogen jet in a supersonic flow both with and without combustion are presented. Tests were conducted in a Mach 2 test stream with both air and nitrogen as test media. Total temperature of the test stream was 2170 K, and static exit pressure was about one atmosphere. The static pressure at the exit of the hydrogen injector's Mach 2 nozzle was about two atmospheres. Primary measurements included shadowgraphs and pitot pressure surveys of the flow field. Pitot surveys and wall static pressures were measured for the case where the entire flow was shrouded. The results are compared to similar experimental data and theoretical predictions for the matched pressure case.

New method for detection of gastric cancer by hyperspectral imaging: a pilot study

NASA Astrophysics Data System (ADS)

Kiyotoki, Shu; Nishikawa, Jun; Okamoto, Takeshi; Hamabe, Kouichi; Saito, Mari; Goto, Atsushi; Fujita, Yusuke; Hamamoto, Yoshihiko; Takeuchi, Yusuke; Satori, Shin; Sakaida, Isao

2013-02-01

We developed a new, easy, and objective method to detect gastric cancer using hyperspectral imaging (HSI) technology combining spectroscopy and imaging A total of 16 gastroduodenal tumors removed by endoscopic resection or surgery from 14 patients at Yamaguchi University Hospital, Japan, were recorded using a hyperspectral camera (HSC) equipped with HSI technology Corrected spectral reflectance was obtained from 10 samples of normal mucosa and 10 samples of tumors for each case The 16 cases were divided into eight training cases (160 training samples) and eight test cases (160 test samples) We established a diagnostic algorithm with training samples and evaluated it with test samples Diagnostic capability of the algorithm for each tumor was validated, and enhancement of tumors by image processing using the HSC was evaluated The diagnostic algorithm used the 726-nm wavelength, with a cutoff point established from training samples The sensitivity, specificity, and accuracy rates of the algorithm's diagnostic capability in the test samples were 78.8% (63/80), 92.5% (74/80), and 85.6% (137/160), respectively Tumors in HSC images of 13 (81.3%) cases were well enhanced by image processing Differences in spectral reflectance between tumors and normal mucosa suggested that tumors can be clearly distinguished from background mucosa with HSI technology.

Asthma Cases Attributable to Atopy: Results from the Third National Health and Nutrition Examination Survey

PubMed Central

Arbes, Samuel J.; Gergen, Peter J.; Vaughn, Ben; Zeldin, Darryl C.

2008-01-01

Background The percentage of asthma cases attributable to atopy is the subject of debate. Objectives The objectives were to estimate the percentage of asthma cases in the U.S. population attributable to atopy and to examine associations between allergen-specific skin tests and asthma. Methods Data were obtained from NHANES III in which subjects aged 6–59 years were skin tested with 10 allergens. Atopy was defined as at least one positive allergen-specific test. Doctor-diagnosed current asthma was assessed by questionnaire. Results In the U.S., 56.3% of the asthma cases were attributable to atopy, and that percentage was greater among males than females, among persons in the highest education category than in lower education categories, and among persons living in highly populated metropolitan areas than in all other areas. Each allergen-specific test was strongly associated with asthma before adjustment (odds ratios varied from 2.1 to 4.5); however, after adjustment by all the allergens, only tests to cat, Alternaria, white oak, and perennial rye were independently associated with asthma. Perennial rye was inversely associated with asthma. Of the 10 allergens, a positive response to cat accounted for the highest percentage of asthma cases (29.3%). Conclusions About half of the current asthma cases in the U.S. population represented by NHANES III were attributable to atopy. Some allergen-specific skin tests were not independently associated with asthma. Clinical Implications If atopy could be prevented or reversed, or its effect on asthma blocked, then a large percentage of asthma cases in the U.S. population could be prevented. PMID:17889931

Numerical analysis of singular solutions of two-dimensional problems of asymmetric elasticity

NASA Astrophysics Data System (ADS)

Korepanov, V. V.; Matveenko, V. P.; Fedorov, A. Yu.; Shardakov, I. N.

2013-07-01

An algorithm for the numerical analysis of singular solutions of two-dimensional problems of asymmetric elasticity is considered. The algorithm is based on separation of a power-law dependence from the finite-element solution in a neighborhood of singular points in the domain under study, where singular solutions are possible. The obtained power-law dependencies allow one to conclude whether the stresses have singularities and what the character of these singularities is. The algorithm was tested for problems of classical elasticity by comparing the stress singularity exponents obtained by the proposed method and from known analytic solutions. Problems with various cases of singular points, namely, body surface points at which either the smoothness of the surface is violated, or the type of boundary conditions is changed, or distinct materials are in contact, are considered as applications. The stress singularity exponents obtained by using the models of classical and asymmetric elasticity are compared. It is shown that, in the case of cracks, the stress singularity exponents are the same for the elasticity models under study, but for other cases of singular points, the stress singularity exponents obtained on the basis of asymmetric elasticity have insignificant quantitative distinctions from the solutions of the classical elasticity.

Dynamical electrical conductivity of graphene

NASA Astrophysics Data System (ADS)

Rani, Luxmi; Singh, Navinder

2017-06-01

For graphene (a Dirac material) it has been theoretically predicted and experimentally observed that DC resistivity is proportional to T 4 when the temperature is much less than Bloch-Grüneisen temperature ({{ \\Theta }\\text{BG}} ) and T-linear in the opposite case (T\\gg {{ \\Theta }\\text{BG}} ). Going beyond this case, we investigate the dynamical electrical conductivity in graphene using the powerful method of the memory function formalism. In the zero frequency regime, we obtain the above mentioned behavior which was previously obtained using the Bloch-Boltzmann kinetic equation. In the finite frequency regime, we obtain several new results: (1) the generalized Drude scattering rate, in the zero temperature limit, shows {ω4} behavior at low frequencies (ω \\ll {{k}\\text{B}}{{ \\Theta }\\text{BG}}/\\hbar ) and saturates at higher frequencies. We also observed the Holstein mechanism, however, with different power laws from that in the case of metals; (2) at higher frequencies, ω \\gg {{k}\\text{B}}{{ \\Theta }\\text{BG}}/\\hbar , and higher temperatures T\\gg {{ \\Theta }\\text{BG}} , we observed that the generalized Drude scattering rate is linear in temperature. In addition, several other results are also obtained. With the experimental advancement of this field, these results should be experimentally tested.

Comparison of Epidermal Growth Factor Receptor Mutations between Metastatic Lymph Node Diagnosed by EBUS-TBNA and Primary Tumor in Non-Small Cell Lung Cancer

PubMed Central

Kang, Hyo Jae; Hwangbo, Bin; Lee, Jin Soo; Kim, Moon Soo; Lee, Jong Mog; Lee, Geon-Kook

2016-01-01

Introduction Although the use of endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) is increasing for epidermal growth factor receptor (EGFR) testing in lung cancer, the discordance rate in EGFR mutations between lymph node (LN) samples obtained by EBUS-TBNA and primary tumor (PT) is not well known. Thus, we compared the EGFR mutation status of LN samples obtained by EBUS-TBNA and PTs to estimate the efficacy of using EBUS-TBNA specimens for EGFR testing in advanced, non-squamous, non-small cell lung cancer (NSCLC). Materials and Methods Using data of patients from the EBUS-TBNA database (N = 1914) obtained between January 2009 and January 2013, we identified 100 treatment-naïve, advanced, non-squamous NSCLC patients (stage 3 and 4) with matched LN specimens obtained by EBUS-TBNA and PT specimens. Of these, 74 patients with paired specimens were feasible for EGFR mutation analysis, which we performed using a direct sequencing method. Results Of the 74 cases, at least one major [exon 19 deleted (19del) and L858R] or minor (T790M, exon 20 insertion, and other point mutations) EGFR mutation was detected in 31 cases (41.9%), which included PT (n = 31, 41.9%) and LN (n = 28, 37.8%) specimens. Major mutations were detected in 25 PT (33.8%, 19del = 13, L858R = 12) and 22 LN (29.8%, 19del = 11, L858R = 11) specimens. The discordance rate in major mutations between matched PT and LN specimens was 4.1% (3/74). Among minor mutations, T790M was detected in LN specimen only in 2 cases with L858R in PT and LN. The discordance rate major and minor EGFR mutations combined between matched PT and LN specimens was 12% (9/74). Conclusions We observed a high concordance rate of major EGFR mutations between matched LN specimens sampled by EBUS-TBNA and PTs, suggesting that LN samples obtained by EBUS-TBNA from advanced non-squamous NSCLC patients are effective for use in EGFR mutation testing. PMID:27685950

Seismic Stability Evaluation of Ririe Dam and Reservoir Project. Report 1. Construction History and Field and Laboratory Studies. Volume 1. Main Text

DTIC Science & Technology

1991-09-01

truck Service truck Steel casing, 8-foot diameter with 3/4-inch wall thickness, was installed as the shaft was advanced. A shaft cover, constructed of... steel mats. was hoisted over the shaft at night for security. To obtain in-situ density tests at selected intervals in the bottom of the shaft...subcontractor installed the three wells using an air-rotary rig, and driving steel casing as the wells were advanced. He then perforated the casings

Is there a link between infant botulism and sudden infant death? Bacteriological results obtained in central Germany.

PubMed

Böhnel, H; Behrens, S; Loch, P; Lube, K; Gessler, F

2001-10-01

Despite the fact that botulism was described in Germany for the first time by Kerner in 1820, the disease is almost forgotten in this country. Only about 10-20 cases of classical botulism (intoxication) are recorded every year, including 1-2 cases of clinical infant botulism. As we assumed a high incidence of botulism to be connected with cases of sudden infant death (SID), we undertook the research work presented here. From every case of unexpected infant death up to 12 months of age, standardised specimens (blood, liver and intestine) were taken at autopsy. They were tested for the presence of botulinum neurotoxin (BoNT) and/or bacterial forms of Clostridium botulinum with subsequent BoNT neutralisation tests by the international standard mouse bioassay. Age, sex, pathological findings and season were recorded. Over a 5-year period, 75 samples including 57 SID cases were tested. Free toxin was found in nine and bacterial forms were detected in six samples. Toxin neutralisation revealed the definite presence of BoNT/BoNT producing bacteria (mainly type E), whereas another 11 toxin tests were inconclusive. According to international literature, these 15 cases are to be interpreted as infant botulism. the results show a remarkable incidence of infant botulism without any known previous medical history, partly hidden as sudden infant death. We propose to systematically search for botulism in connection with sudden infant death.

[Experimental model for metastasis of cecal origin].

PubMed

Bail, J P; Loridon, B; Aillet, G; Poupon, M F; Douillard, J Y

1991-01-01

The pre-selected tumor cells injection in the cecal wall of rat, seems to be a intermediate model between spontaneous evolution of a colon tumor and intrasplenic or direct intraportal injections. From rhabdomyosarcoma cells (RMS S4-MH-) which present the advantage to prudce up lymphatic, pulmonary and hepatic metastases after subcutaneously injection, first subcutaneously (S.C.), intrasplenic (I.S.) and intracecal sites were compared: In the I.C. model, tumor was obtained in 80% of case and the survival was nearly similar to S.C. model's one. The lymphatic metastases were more and more distal as the evolution and the liver metastases were rarely observed. The I.S. model increased quickly and there were always liver metastases; In the two cases, pulmonary metastases were rarely observed (0 and 2/5). With adenocarcinoma colonic cells (Pro b) I.C. injection in the rat, tumor were obtained in 48% of cases without peritoneal dissemination; lymphatic nodes metastases were observed in 80% of cases; liver metastases was obtained in one animal from metastasis pulmonary selection cell lines. The I.C. model allows to estimate the liver and lymphatic nodes part; improved, it would be used to test adjuvant therapies and immunoscintigraphy.

Neural Network for Nanoscience Scanning Electron Microscope Image Recognition.

PubMed

Modarres, Mohammad Hadi; Aversa, Rossella; Cozzini, Stefano; Ciancio, Regina; Leto, Angelo; Brandino, Giuseppe Piero

2017-10-16

In this paper we applied transfer learning techniques for image recognition, automatic categorization, and labeling of nanoscience images obtained by scanning electron microscope (SEM). Roughly 20,000 SEM images were manually classified into 10 categories to form a labeled training set, which can be used as a reference set for future applications of deep learning enhanced algorithms in the nanoscience domain. The categories chosen spanned the range of 0-Dimensional (0D) objects such as particles, 1D nanowires and fibres, 2D films and coated surfaces, and 3D patterned surfaces such as pillars. The training set was used to retrain on the SEM dataset and to compare many convolutional neural network models (Inception-v3, Inception-v4, ResNet). We obtained compatible results by performing a feature extraction of the different models on the same dataset. We performed additional analysis of the classifier on a second test set to further investigate the results both on particular cases and from a statistical point of view. Our algorithm was able to successfully classify around 90% of a test dataset consisting of SEM images, while reduced accuracy was found in the case of images at the boundary between two categories or containing elements of multiple categories. In these cases, the image classification did not identify a predominant category with a high score. We used the statistical outcomes from testing to deploy a semi-automatic workflow able to classify and label images generated by the SEM. Finally, a separate training was performed to determine the volume fraction of coherently aligned nanowires in SEM images. The results were compared with what was obtained using the Local Gradient Orientation method. This example demonstrates the versatility and the potential of transfer learning to address specific tasks of interest in nanoscience applications.

[Benefits of using rapid HIV testing at the PMU-FLON walk-in clinic in Lausanne].

PubMed

Gilgien, W; Aubert, J; Bischoff, T; Herzig, L; Perdrix, J

2012-05-16

Lab tests are frequently used in primary care to guide patient care. This is particularly the case when a severe disorder, or one that will affect patients' initial care, needs to be excluded rapidly. At the PMU-FLON walk-in clinic the use of HIV testing as recommended by the Swiss Office of Public Health was hampered by the delay in obtaining test results. This led us to introduce rapid HIV testing which provides results within 30 minutes. Following the first 250 tests the authors discuss the results as well as the benefits of rapid HIV testing in an urban walk-in clinic.

Ultimate Lateral Capacity of Rigid Pile in c- φ Soil

NASA Astrophysics Data System (ADS)

Zhang, Wei-min

2018-03-01

To date no analytical solution of the pile ultimate lateral capacity for the general c- φ soil has been obtained. In the present study, a new dimensionless embedded ratio was proposed and the analytical solutions of ultimate lateral capacity and rotation center of rigid pile in c- φ soils were obtained. The results showed that both the dimensionless ultimate lateral capacity and dimensionless rotation center were the univariate functions of the embedded ratio. Also, the ultimate lateral capacity in the c- φ soil was the combination of the ultimate lateral capacity ( f c ) in the clay, and the ultimate lateral capacity ( f φ ) in the sand. Therefore, the Broms chart for clay, solution for clay ( φ=0) put forward by Poulos and Davis, solution for sand ( c=0) obtained by Petrasovits and Awad, and Kondner's ultimate bending moment were all proven to be the special cases of the general solution in the present study. A comparison of the field and laboratory tests in 93 cases showed that the average ratios of the theoretical values to the experimental value ranged from 0.85 to 1.15. Also, the theoretical values displayed a good agreement with the test values.

Planetary Radio Interferometry and Doppler Experiment (PRIDE) technique: A test case of the Mars Express Phobos Flyby. II. Doppler tracking: Formulation of observed and computed values, and noise budget

NASA Astrophysics Data System (ADS)

Bocanegra-Bahamón, T. M.; Molera Calvés, G.; Gurvits, L. I.; Duev, D. A.; Pogrebenko, S. V.; Cimò, G.; Dirkx, D.; Rosenblatt, P.

2018-01-01

Context. Closed-loop Doppler data obtained by deep space tracking networks, such as the NASA Deep Space Network (DSN) and the ESA tracking station network (Estrack), are routinely used for navigation and science applications. By shadow tracking the spacecraft signal, Earth-based radio telescopes involved in the Planetary Radio Interferometry and Doppler Experiment (PRIDE) can provide open-loop Doppler tracking data only when the dedicated deep space tracking facilities are operating in closed-loop mode. Aims: We explain the data processing pipeline in detail and discuss the capabilities of the technique and its potential applications in planetary science. Methods: We provide the formulation of the observed and computed values of the Doppler data in PRIDE tracking of spacecraft and demonstrate the quality of the results using an experiment with the ESA Mars Express spacecraft as a test case. Results: We find that the Doppler residuals and the corresponding noise budget of the open-loop Doppler detections obtained with the PRIDE stations compare to the closed-loop Doppler detections obtained with dedicated deep space tracking facilities.

Speaker verification using committee neural networks.

PubMed

Reddy, Narender P; Buch, Ojas A

2003-10-01

Security is a major problem in web based access or remote access to data bases. In the present study, the technique of committee neural networks was developed for speech based speaker verification. Speech data from the designated speaker and several imposters were obtained. Several parameters were extracted in the time and frequency domains, and fed to neural networks. Several neural networks were trained and the five best performing networks were recruited into the committee. The committee decision was based on majority voting of the member networks. The committee opinion was evaluated with further testing data. The committee correctly identified the designated speaker in (50 out of 50) 100% of the cases and rejected imposters in (150 out of 150) 100% of the cases. The committee decision was not unanimous in majority of the cases tested.

A tailored approach to BRAF and MLH1 methylation testing in a universal screening program for Lynch syndrome.

PubMed

Adar, Tomer; Rodgers, Linda H; Shannon, Kristen M; Yoshida, Makoto; Ma, Tianle; Mattia, Anthony; Lauwers, Gregory Y; Iafrate, Anthony J; Chung, Daniel C

2017-03-01

To determine the correlation between BRAF genotype and MLH1 promoter methylation in a screening program for Lynch syndrome (LS), a universal screening program for LS was established in two medical centers. Tumors with abnormal MLH1 staining were evaluated for both BRAF V600E genotype and MLH1 promoter methylation. Tumors positive for both were considered sporadic, and genetic testing was recommended for all others. A total 1011 colorectal cancer cases were screened for Lynch syndrome, and 148 (14.6%) exhibited absent MLH1 immunostaining. Both BRAF and MLH1 methylation testing were completed in 126 cases. Concordant results (both positive or both negative) were obtained in 86 (68.3%) and 16 (12.7%) cases, respectively, with 81% concordance overall. The positive and negative predictive values for a BRAF mutation in predicting MLH1 promoter methylation were 98.9% and 41%, respectively, and the negative predictive value fell to 15% in patients ≥70 years old. Using BRAF genotyping as a sole test to evaluate cases with absent MLH1 staining would have increased referral rates for genetic testing by 2.3-fold compared with MLH1 methylation testing alone (31% vs 13.5%, respectively, P<0.01). However, a hybrid approach that reserves MLH1 methylation testing for BRAF wild-type cases only would significantly decrease the number of methylation assays performed and reduce the referral rate for genetic testing to 12.7%. A BRAF mutation has an excellent positive predictive value but poor negative predictive value in predicting MLH1 promoter methylation. A hybrid use of these tests may reduce the number of low-risk patients referred to genetic counseling and facilitate wider implementation of Lynch syndrome screening programs.

Optical holographic structural analysis of Kevlar rocket motor cases

NASA Astrophysics Data System (ADS)

Harris, W. J.

1981-05-01

The methodology of applying optical holography to evaluation of subscale Kevlar 49 composite pressure vessels is explored. The results and advantages of the holographic technique are discussed. The cases utilized were of similar design, but each had specific design features, the effects of which are reviewed. Burst testing results are presented in conjunction with the holographic fringe patterns obtained during progressive pressurization. Examples of quantitative data extracted by analysis of fringe fields are included.

Post-mortem diagnosis of chronic Chagas's disease comparative evaluation of three serological tests on pericardial fluid.

PubMed

Lopes, E R; Chapadeiro, E; Batista, S M; Cunha, J G; Rocha, A; Miziara, L; Ribeiro, J U; Patto, R J

1978-01-01

In an attempt to improve the post-mortem diagnosis of Chagas's disease the authors performed haemagglutination tests (HAT), fluorescent Trypanosoma cruzi antibody tests (FAT), and complement fixation tests (CFT) on the pericardial fluid obtained at autopsy of 50 individuals with Chagas's heart disease, and 93 patients in whom this disease was not thought to be present. The results demonstrate that all three tests are efficient for the post-mortem diagnosis of Chagas's disease but suggest that their combined use would detect more cases than would one isolated reaction only.

Antepartum evaluation of the fetus and fetal well being.

PubMed

O'Neill, Erica; Thorp, John

2012-09-01

Despite widespread use of many methods of antenatal testing, limited evidence exists to demonstrate effectiveness at improving perinatal outcomes. An exception is the use of Doppler ultrasound in monitoring high-risk pregnancies thought to be at risk of placental insufficiency. Otherwise, obstetricians should proceed with caution and approach the initiation of a testing protocol by obtaining an informed consent. When confronted with an abnormal test, clinicians should evaluate with a second antenatal test and consider administering betamethasone, performing amniocentesis to assess lung maturity, and/or repeating testing to minimize the chance of iatrogenic prematurity in case of a healthy fetus.

In vitro performance of ceramic coatings obtained by high velocity oxy-fuel spray.

PubMed

Melero, H; Garcia-Giralt, N; Fernández, J; Díez-Pérez, A; Guilemany, J M

2014-01-01

Hydroxyapatite coatings obtained by plasma-spraying have been used for many years to improve biological performance of bone implants, but several studies have drawn attention to the problems arising from high temperatures and the lack of mechanical properties. In this study, plasma-spraying is substituted by high velocity oxy-fuel (HVOF) spray, with lower temperatures reached, and TiO2 is added in low amounts to hydroxyapatite in order to improve the mechanical properties. Four conditions have been tested to evaluate which are those with better biological properties. Viability and proliferation tests, as well as differentiation assays and morphology observation, are performed with human osteoblast cultures onto the studied coatings. The hydroxyapatite-TiO2 coatings maintain good cell viability and proliferation, especially the cases with higher amorphous phase amount and specific surface, and promote excellent differentiation, with a higher ALP amount for these cases than for polystyrene controls. Observation by SEM corroborates this excellent behaviour. In conclusion, these coatings are a good alternative to those used industrially, and an interesting issue would be improving biological behaviour of the worst cases, which in turn show the better mechanical properties.

Computational considerations for the simulation of shock-induced sound

NASA Technical Reports Server (NTRS)

Casper, Jay; Carpenter, Mark H.

1996-01-01

The numerical study of aeroacoustic problems places stringent demands on the choice of a computational algorithm, because it requires the ability to propagate disturbances of small amplitude and short wavelength. The demands are particularly high when shock waves are involved, because the chosen algorithm must also resolve discontinuities in the solution. The extent to which a high-order-accurate shock-capturing method can be relied upon for aeroacoustics applications that involve the interaction of shocks with other waves has not been previously quantified. Such a study is initiated in this work. A fourth-order-accurate essentially nonoscillatory (ENO) method is used to investigate the solutions of inviscid, compressible flows with shocks in a quasi-one-dimensional nozzle flow. The design order of accuracy is achieved in the smooth regions of a steady-state test case. However, in an unsteady test case, only first-order results are obtained downstream of a sound-shock interaction. The difficulty in obtaining a globally high-order-accurate solution in such a case with a shock-capturing method is demonstrated through the study of a simplified, linear model problem. Some of the difficult issues and ramifications for aeroacoustics simulations of flows with shocks that are raised by these results are discussed.

Slim hole drilling and testing strategies

NASA Astrophysics Data System (ADS)

Nielson, Dennis L.; Garg, Sabodh K.; Goranson, Colin

2017-12-01

The financial and geologic advantages of drilling slim holes instead of large production wells in the early stages of geothermal reservoir assessment has been understood for many years. However, the practice has not been fully embraced by geothermal developers. We believe that the reason for this is that there is a poor understanding of testing and reservoir analysis that can be conducted in slim holes. In addition to reservoir engineering information, coring through the cap rock and into the reservoir provides important data for designing subsequent production well drilling and completion. Core drilling requires significantly less mud volume than conventional rotary drilling, and it is typically not necessary to cure lost circulation zones (LCZ). LCZs should be tested by either production or injection methods as they are encountered. The testing methodologies are similar to those conducted on large-diameter wells; although produced and/or injected fluid volumes are much less. Pressure, temperature and spinner (PTS) surveys in slim holes under static conditions can used to characterize temperature and pressure distribution in the geothermal reservoir. In many cases it is possible to discharge slim holes and obtain fluid samples to delineate the geochemical properties of the reservoir fluid. Also in the latter case, drawdown and buildup data obtained using a downhole pressure tool can be employed to determine formation transmissivity and well properties. Even if it proves difficult to discharge a slim hole, an injection test can be performed to obtain formation transmissivity. Given the discharge (or injection) data from a slimhole, discharge properties of a large-diameter well can be inferred using wellbore modeling. Finally, slim hole data (pressure, temperature, transmissivity, fluid properties) together with reservoir simulation can help predict the ability of the geothermal reservoir to sustain power production.

Teaching Clinical Neurology with the PLATO IV Computer System

ERIC Educational Resources Information Center

Parker, Alan; Trynda, Richard

1975-01-01

A "Neurox" program entitled "Canine Neurological Diagnosis" developed at the University of Illinois College of Veterinary Medicine enables a student to obtain the results of 78 possible neurological tests or associated questions on a single case. A lesson and possible adaptations are described. (LBH)

Etiological misidentification by routine biochemical tests of bacteremia caused by Gordonia terrae infection in the course of an episode of acute cholecystitis.

PubMed

Gil-Sande, E; Brun-Otero, M; Campo-Cerecedo, F; Esteban, E; Aguilar, L; García-de-Lomas, J

2006-07-01

Gordonia terrae has been reported to be a rare cause of bacteremia. We report the first case of bacteremia associated with acute cholecystitis. Commercial biochemical testing was not able to identify the strain at the genus level, classifying it instead as Rhodococcus sp. Definitive identification was obtained by sequencing of the 16S rRNA gene.

Classification image analysis: estimation and statistical inference for two-alternative forced-choice experiments

NASA Technical Reports Server (NTRS)

Abbey, Craig K.; Eckstein, Miguel P.

2002-01-01

We consider estimation and statistical hypothesis testing on classification images obtained from the two-alternative forced-choice experimental paradigm. We begin with a probabilistic model of task performance for simple forced-choice detection and discrimination tasks. Particular attention is paid to general linear filter models because these models lead to a direct interpretation of the classification image as an estimate of the filter weights. We then describe an estimation procedure for obtaining classification images from observer data. A number of statistical tests are presented for testing various hypotheses from classification images based on some more compact set of features derived from them. As an example of how the methods we describe can be used, we present a case study investigating detection of a Gaussian bump profile.

Space shuttle: Aerodynamic characteristics of cone-cylinder-flare-fin configurations at Mach numbers of 1.96, 2.74, and 4.96 and angles of attack from 50 to 90 degrees

NASA Technical Reports Server (NTRS)

Bradley, D.; Ellis, R. R.

1972-01-01

A 0.00227-scale parametric model of an LMSC/MSFC water recoverable booster was tested in the MSFC 14 x 14-inch trisonic wind tunnel. The purpose of the test was to obtain high angle of attack force and static stability data which could be used by MSFC in preliminary design and aerodynamic trade studies. These data were obtained using six-component internal strain gauge balances. One hundred forty-four different geometrical combinations were possible as all model parts were interchangeable (three nose cones, three cylinder lengths, four flare sections and three sets of fins, plus a no-fin case in combination with the other components). However, due to tunnel occupancy limitations, only the most representative combinations were tested. All configurations investigated were tested at Mach 1.96, 2.74 and 4.96 with data obtained at angles of attack from 50 degrees to 90 degrees and at angles of sideslip from -10 degrees to +10 degrees (at an angle of attack of 60 degrees).

Grating test of contrast sensitivity in patients with Minamata disease.

PubMed Central

Mukuno, K; Ishikawa, S; Okamura, R

1981-01-01

Thirty cases of Minamata disease caused by methyl mercury poisoning with the lesion mainly at the occipital cortex were selected and their spatial contrast sensitivity of vision was examined by the Arden grating chart. At the same time their visual acuity, visual field, and visual evoked cortical potential (VECP) were also investigated. In all cases the results of the Arden test indicated abnormality. Poor results were obtained at higher frequencies of the gratings. VECP elicited by grating pattern reversal stimulus was undertaken in 12 cases out of the 30. The results revealed abnormality almost equal to that shown by the Arden test. Seven out of the 12 cases showed no VECP response. The other 5, giving a response, showed abnormality: when the size of the grating became smaller at higher frequencies, the VECP paused or was not recorded, whereas at low frequencies it was recorded. This finding was in good agreement or was not recorded, whereas at low frequencies it was recorded. This finding was in good agreement with the results of the Arden test. Visual acuity and visual field tests were less sensitive in detecting abnormality. The Arden chart is a sensitive clinical tool for patients with lesions at the cerebral cortex. Furthermore, the test can be used for screening patients who may have come in contrast with organic mercury. PMID:7236573

BrucellaCapt versus classical tests in the serological diagnosis and management of human brucellosis.

PubMed

Casanova, Aurora; Ariza, Javier; Rubio, Manuel; Masuet, Cristina; Díaz, Ramón

2009-06-01

The BrucellaCapt test is an immunocapture agglutination test suggested as a possible substitute for the Coombs test in the diagnosis of human brucellosis. Here it is compared with classical tests using 321 samples from 48 patients with brucellosis (6.9 +/- 1.7 samples per patient), including 20 patients with focal disease and 8 patients with a total of 9 relapse episodes (mean follow-up, 18 months). The BrucellaCapt test was used according to the manufacturer's instructions, and we also used a variant of the BrucellaCapt test in which the microtiter plates were not coated with antibodies against total human immunoglobulin (BCAPV). The correlation between the BrucellaCapt and BCAPV tests was 0.982 (P < 0.001), with 260 coincident pairs of titers (81%). The areas under the receiver operating characteristic curve for the BrucellaCapt and BCAPV tests with respect to the Coombs test were 0.969 and 0.960, respectively. Upon admission, the BrucellaCapt, BCAPV, and Coombs tests and the microagglutination test (MAT) were positive for all cases: titers were 1/2,560 by the BrucellaCapt test, 1/2,560 by the BCAPV test, 1/1,280 by the Coombs test, and 1/320 by the MAT. The decreases in the BrucellaCapt and BCAPV titers over time were pronounced in comparison with the Coombs titers. Cumulative probabilities of persistence 12 months after therapy were as follows: 80% by the BrucellaCapt test, 80% by the BCAPV test, 87% by the Coombs test, and 35% by the MAT. Serological changes during relapse were detected in seven cases (88%) by the Coombs test, in five cases by the BrucellaCapt and BCAPV tests, and in three cases by the MAT. The BrucellaCapt test is a sensitive, specific, and simple test for routine use in human brucellosis. Similar results were obtained with the BCAPV test. However, in some cases of relapse and chronic forms of the disease, the slight changes observed in low-affinity antibodies alone are better detected by the Coombs test.

Acid phosphatase test on Phadebas® sheets - An optimized method for presumptive saliva and semen detection.

PubMed

Herman, Yael; Feine, Ilan; Gafny, Ron

2018-04-30

The precise and efficient detection of semen and saliva in sexual assault case-work items is a critical step in the forensic pipeline. The outcome of this stage may have a profound impact on identifying perpetrators as well as on the investigation process and the final outcome in court. Semen detection is usually based on the activity of acid phosphatase (AP), an enzyme found in high concentration in the seminal plasma. Amylase, an enzyme catalyzing starch hydrolysis is found in high concentrations in saliva and therefore is a useful target for its detection. To screen case-work items, both presumptive tests require transfer of biological material from the item to paper in a moisturized environment. Since semen and saliva may appear in the same item, it is required in some cases to perform the tests one after the other. This may reduce the chances of identifying all stains on the item and obtaining a DNA profile. In the present study, we applied the AP biochemical test on a Phadebas ® sheet, a commercial starch containing paper used to detect saliva. This approach was found to be sensitive enough to detect diluted semen (1:50) after performing the Phadebas ® press test. In addition, it enabled detection of adjacent saliva and semen stains and stains containing a semen-saliva mixture. Finally, a DNA profile was successfully obtained from the Phadebas ® sheets after semen detection, a useful feature if the original item is lost or damaged. Taken together, this method provides a practical, reliable and convenient tool for screening sexual assault items of evidence. Copyright © 2018 Elsevier B.V. All rights reserved.

The Diagnosis of Periprosthetic Infection

PubMed Central

del Arco, Alfonso; Bertrand, María Luisa

2013-01-01

Periprosthetic infection (PJI) is the most serious joint replacement complication, occurring in 0.8-1.9% of knee arthroplasties and 0.3-1.7% of hip arthroplasties. A definition of PJI was proposed in the November 2011 issue of the journal Clinical Orthopedics and Related Research. The presence of a fistula or of local inflammatory signs is indicative of PJI, but in many cases local pain is the only symptom. In the absence of underlying inflammatory conditions, C-reactive protein measurement is the most useful preoperative blood test for detecting infection associated with a prosthetic joint. The most useful preoperative diagnostic test is the aspiration of synovial joint fluid to obtain a total and differential cell count and culture. Intraoperative frozen sections of periprosthetic tissues produce excellent accuracy in predicting a diagnosis of PJI but only moderate accuracy in ruling out the diagnosis. In this process, obtaining a quality sample is the first step, and determines the quality of microbiological results. Specimens for culture should be obtained prior to the initiation of antibiotic treatment. Sonication of a removed implant may increase the culture yield. Plain radiography has low sensitivity and low specificity for detecting infection associated with a prosthetic joint. Computed tomography and magnetic resonance imaging may be useful in the evaluation of complex cases, but metal inserts interfere with these tests, and abnormalities may be non-specific. Labelled-leucocyte imaging (e.g., leucocytes labelled with indium-111) combined with bone marrow imaging with the use of technetium-99m–labelled sulphur colloid is considered the imaging test of choice when imaging is necessary. PMID:23898349

Efficient logistic regression designs under an imperfect population identifier.

PubMed

Albert, Paul S; Liu, Aiyi; Nansel, Tonja

2014-03-01

Motivated by actual study designs, this article considers efficient logistic regression designs where the population is identified with a binary test that is subject to diagnostic error. We consider the case where the imperfect test is obtained on all participants, while the gold standard test is measured on a small chosen subsample. Under maximum-likelihood estimation, we evaluate the optimal design in terms of sample selection as well as verification. We show that there may be substantial efficiency gains by choosing a small percentage of individuals who test negative on the imperfect test for inclusion in the sample (e.g., verifying 90% test-positive cases). We also show that a two-stage design may be a good practical alternative to a fixed design in some situations. Under optimal and nearly optimal designs, we compare maximum-likelihood and semi-parametric efficient estimators under correct and misspecified models with simulations. The methodology is illustrated with an analysis from a diabetes behavioral intervention trial. © 2013, The International Biometric Society.

Test Cases for Flutter of the Benchmark Models Rectangular Wings on the Pitch and Plunge Apparatus

NASA Technical Reports Server (NTRS)

Bennett, Robert M.

2000-01-01

The supercritical airfoil was chosen as a relatively modem airfoil for comparison. The BOO12 model was tested first. Three different types of flutter instability boundaries were encountered, a classical flutter boundary, a transonic stall flutter boundary at angle of attack, and a plunge instability near M = 0.9 and for zero angle of attack. This test was made in air and was Transonic Dynamics Tunnel (TDT) Test 468. The BSCW model (for Benchmark SuperCritical Wing) was tested next as TDT Test 470. It was tested using both with air and a heavy gas, R-12, as a test medium. The effect of a transition strip on flutter was evaluated in air. The B64AOlO model was subsequently tested as TDT Test 493. Some further analysis of the experimental data for the BOO12 wing is presented. Transonic calculations using the parameters for the BOO12 wing in a two-dimensional typical section flutter analysis are given. These data are supplemented with data from the Benchmark Active Controls Technology model (BACT) given and in the next chapter of this document. The BACT model was of the same planform and airfoil as the BOO12 model, but with spoilers and a trailing edge control. It was tested in the heavy gas R-12, and was instrumented mostly at the 60 per cent span. The flutter data obtained on PAPA and the static aerodynamic test cases from BACT serve as additional data for the BOO12 model. All three types of flutter are included in the BACT Test Cases. In this report several test cases are selected to illustrate trends for a variety of different conditions with emphasis on transonic flutter. Cases are selected for classical and stall flutter for the BSCW model, for classical and plunge for the B64AOlO model, and for classical flutter for the BOO12 model. Test Cases are also presented for BSCW for static angles of attack. Only the mean pressures and the real and imaginary parts of the first harmonic of the pressures are included in the data for the test cases, but digitized time histories have been archived. The data for the test cases are available as separate electronic files. An overview of the model and tests is given, the standard formulary for these data is listed, and some sample results are presented.

Interpreting DNA mixtures with the presence of relatives.

PubMed

Hu, Yue-Qing; Fung, Wing K

2003-02-01

The assessment of DNA mixtures with the presence of relatives is discussed in this paper. The kinship coefficients are incorporated into the evaluation of the likelihood ratio and we first derive a unified expression of joint genotypic probabilities. A general formula and seven types of detailed expressions for calculating likelihood ratios are then developed for the case that a relative of the tested suspect is an unknown contributor to the mixed stain. These results can also be applied to the case of a non-tested suspect with one tested relative. Moreover, the formula for calculating the likelihood ratio when there are two related unknown contributors is given. Data for a real situation are given for illustration, and the effect of kinship on the likelihood ratio is shown therein. Some interesting findings are obtained.

Probing the dark energy with quasar clustering.

PubMed

Calvão, M O; de Mello Neto, J R T; Waga, I

2002-03-04

We show through Monte Carlo simulations that the Alcock-Paczyński test, as applied to quasar clustering, is a powerful tool to probe the cosmological density and equation of state parameters Omega(m0), Omega(x0), and w. By taking into account the effect of peculiar velocities upon the correlation function we obtain for the Two-Degree Field QSO Redshift Survey the predicted confidence contours for the cosmological constant (w = -1) and spatially flat (Omega(m0)+Omega(x0) = 1) cases. For w = -1, the test is especially sensitive to the difference Omega(m0)-Omega(Lambda0), thus being ideal to combine with cosmic microwave background results. For the flat case, it is competitive with future supernova and galaxy number count tests, besides being complementary to them.

Mechanical analysis and force chain determination in granular materials using digital image correlation.

PubMed

Chen, Fanxiu; Zhuang, Qi; Zhang, Huixin

2016-06-20

The mechanical behaviors of granular materials are governed by the grain properties and microstructure of the materials. We conducted experiments to study the force transmission in granular materials using plane strain tests. The large amount of nearly continuous displacement data provided by the advanced noncontact experimental technique of digital image correlation (DIC) has provided a means to quantify local displacements and strains at the particle level. The average strain of each particle could be calculated based on the DIC method, and the average stress could be obtained using Hooke's law. The relationship between the stress and particle force could be obtained based on basic Newtonian mechanics and the balance of linear momentum at the particle level. This methodology is introduced and validated. In the testing procedure, the system is tested in real 2D particle cases, and the contact forces and force chain are obtained and analyzed. The system has great potential for analyzing a real granular system and measuring the contact forces and force chain.

[Results of Training for Personnel Involved in Blood-Transfusion Testing Outside of Regular Work Hours at Saga University Hospital].

PubMed

Yamada, Marie; Yamada, Naotomo; Higashitani, Takanori; Ohta, Shoichiro; Sueoka, Eisaburo

2015-11-01

Laboratory testing prior to blood transfusion outside of regular hours in many hospitals and clinics is frequently conducted by technicians without sufficient experience in such testing work. To obtain consistent test results regardless of the degree of laboratory experience with blood transfusion testing, the number of facilities introducing automated equipment for testing prior to blood transfusion is increasing. Our hospital's blood transfusion department introduced fully automated test equipment in October of 2010 for use when blood transfusions are conducted outside of regular hours. However, excessive dependence on automated testing can lead to an inability to do manual blood typing or cross-match testing when necessitated by breakdowns in the automated test equipment, in the case of abnormal specimen reactions, or other such case. In addition, even outside of normal working hours there are more than a few instances in which transfusion must take place based on urgent communications from clinical staff, with the need for prompt and flexible timing of blood transfusion test and delivery of blood products. To address this situation, in 2010 we began training after-hours laboratory personnel in blood transfusion testing to provide practice using test tubes manually and to achieve greater understanding of blood transfusion test work (especially in cases of critical blood loss). Results of the training and difficulties in its implementation for such after-hours laboratory personnel at our hospital are presented and discussed in this paper. [Original

The direct-stress fatigue strength of 17S-T aluminum alloy throughout the range from 1/2 to 500,000,000 cycles of stress

NASA Technical Reports Server (NTRS)

Hartmann, E C; Stickley, G W

1942-01-01

Fatigue-test were conducted on six specimens made from 3/4-inch-diameter 17S-T rolled-and-drawn rod for the purpose of obtaining additional data on the fatigue life of the material at stresses up to the static strength. The specimens were tested in direct tension using a stress range from zero to a maximum in tension. A static testing machine was used to apply repeated loads in the case of the first three specimens; the other three specimens were tested in a direct tension-compression fatigue machine. The direct-stress fatigue curve obtained for the material indicates that, in the range of stresses above about two-thirds the tensile strength, the fatigue strength is higher than might be expected by simply extrapolating the ordinary curve of stress plotted against the number of cycles determined at lower stresses.

Fragrance contact allergy: a 4-year retrospective study.

PubMed

Cuesta, Laura; Silvestre, Juan Francisco; Toledo, Fernando; Lucas, Ana; Pérez-Crespo, María; Ballester, Irene

2010-08-01

Fragrance chemicals are the second most frequent cause of contact allergy. The mandatory labelling of 26 fragrance chemicals when present in cosmetics has facilitated management of patients allergic to fragrances. The study was aimed to define the characteristics of the population allergic to perfumes detected in our hospital district, to determine the usefulness of markers of fragrance allergy in the baseline GEIDAC series, and to describe the contribution made by the fragrance series to the data obtained with the baseline series. We performed a 4-year retrospective study of patients tested with the Spanish baseline series and/or fragrance series. There are four fragrance markers in the baseline series: fragrance mix I (FM I), Myroxylon pereirae, fragrance mix II (FM II), and hydroxyisohexyl 3-cyclohexene carboxaldehyde. A total of 1253 patients were patch tested, 117 (9.3%) of whom were positive to a fragrance marker. FM I and M. pereirae detected 92.5% of the cases of fragrance contact allergy. FM II and hydroxyisohexyl 3-cyclohexene carboxaldehyde detected 6 additional cases and provided further information in 8, enabling improved management. A fragrance series was tested in a selected group of 86 patients and positive results were obtained in 45.3%. Geraniol was the allergen most frequently found in the group of patients tested with the fragrance series. Classic markers detect the majority of cases of fragrance contact allergy. We recommend incorporating FM II in the Spanish baseline series, as in the European baseline series, and using a specific fragrance series to study patients allergic to a fragrance marker.

Automated interferometric alignment system for paraboloidal mirrors

DOEpatents

Maxey, L. Curtis

1993-01-01

A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aigning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront.

Automated interferometric alignment system for paraboloidal mirrors

DOEpatents

Maxey, L.C.

1993-09-28

A method is described for a systematic method of interpreting interference fringes obtained by using a corner cube retroreflector as an alignment aid when aligning a paraboloid to a spherical wavefront. This is applicable to any general case where such alignment is required, but is specifically applicable in the case of aligning an autocollimating test using a diverging beam wavefront. In addition, the method provides information which can be systematically interpreted such that independent information about pitch, yaw and focus errors can be obtained. Thus, the system lends itself readily to automation. Finally, although the method is developed specifically for paraboloids, it can be seen to be applicable to a variety of other aspheric optics when applied in combination with a wavefront corrector that produces a wavefront which, when reflected from the correctly aligned aspheric surface will produce a collimated wavefront like that obtained from the paraboloid when it is correctly aligned to a spherical wavefront. 14 figures.

An experimental investigation of compressible three-dimensional boundary layer flow in annular diffusers

NASA Technical Reports Server (NTRS)

Om, Deepak; Childs, Morris E.

1987-01-01

An experimental study is described in which detailed wall pressure measurements have been obtained for compressible three-dimensional unseparated boundary layer flow in annular diffusers with and without normal shock waves. Detailed mean flow-field data were also obtained for the diffuser flow without a shock wave. Two diffuser flows with shock waves were investigated. In one case, the normal shock existed over the complete annulus whereas in the second case, the shock existed over a part of the annulus. The data obtained can be used to validate computational codes for predicting such flow fields. The details of the flow field without the shock wave show flow reversal in the circumferential direction on both inner and outer surfaces. However, there is a lag in the flow reversal between the inner nad the outer surfaces. This is an interesting feature of this flow and should be a good test for the computational codes.

Drug resistance in Mexico: results from the National Survey on Drug-Resistant Tuberculosis.

PubMed

Bojorquez-Chapela, I; Bäcker, C E; Orejel, I; López, A; Díaz-Quiñonez, A; Hernández-Serrato, M I; Balandrano, S; Romero, M; Téllez-Rojo Solís, M M; Castellanos, M; Alpuche, C; Hernández-Ávila, M; López-Gatell, H

2013-04-01

To present estimations obtained from a population-level survey conducted in Mexico of prevalence rates of mono-, poly- and multidrug-resistant strains among newly diagnosed cases of pulmonary tuberculosis (TB), as well as the main factors associated with multidrug resistance (combined resistance to isoniazid and rifampicin). Study data came from the National Survey on TB Drug Resistance (ENTB-2008), a nationally representative survey conducted during 2008-2009 in nine states with a stratified cluster sampling design. Samples were obtained for all newly diagnosed cases of pulmonary TB in selected sites. Drug susceptibility testing (DST) was performed for anti-tuberculosis drugs. DST results were obtained for 75% of the cases. Of these, 82.2% (95%CI 79.5-84.7) were susceptible to all drugs. The prevalence of multidrug-resistant TB (MDR-TB) was estimated at 2.8% (95%CI 1.9-4.0). MDR-TB was associated with previous treatment (OR 3.3, 95%CI 1.1-9.4). The prevalence of drug resistance is relatively low in Mexico. ENTB-2008 can be used as a baseline for future follow-up of drug resistance.

Implications of low-power He-Ne laser and monochromatic red light biostimulation in the metabolism of proteins and glucosides

NASA Astrophysics Data System (ADS)

Onac, I.; Pop, L.; Ungur, Rodica; Giurgiu, Ioana

2001-06-01

We checked the changes occurring in the metabolism of proteins (seric cholinesterase, total proteins) and in the metabolism of glycosides (seric glucose) in Cavia cobaia. A simple blind study was carried out and the results were checked on the first, tenth and twentieth days of treatment. The data thus obtained were graphically represented and statistically processed according to the Duncan test. The technique and treatment doses were similar and they were compared with the data obtained from controls and environment controls. In the groups biostimulated with He-Ne laser, seric cholinesterase levels increased proportionally with the dose reaching a peak on day 10, which was not the case with the controls. Monochromatic red light caused a similar but quantitatively lower effect. The same results were obtained in the case of seric proteins as well, however, the effect did not depend on the dose and it was less significant statistically than in the case of seric cholinesterase both in laser treated and in monochromatic red light treated groups.

Numerical solution of special ultra-relativistic Euler equations using central upwind scheme

NASA Astrophysics Data System (ADS)

Ghaffar, Tayabia; Yousaf, Muhammad; Qamar, Shamsul

2018-06-01

This article is concerned with the numerical approximation of one and two-dimensional special ultra-relativistic Euler equations. The governing equations are coupled first-order nonlinear hyperbolic partial differential equations. These equations describe perfect fluid flow in terms of the particle density, the four-velocity and the pressure. A high-resolution shock-capturing central upwind scheme is employed to solve the model equations. To avoid excessive numerical diffusion, the considered scheme avails the specific information of local propagation speeds. By using Runge-Kutta time stepping method and MUSCL-type initial reconstruction, we have obtained 2nd order accuracy of the proposed scheme. After discussing the model equations and the numerical technique, several 1D and 2D test problems are investigated. For all the numerical test cases, our proposed scheme demonstrates very good agreement with the results obtained by well-established algorithms, even in the case of highly relativistic 2D test problems. For validation and comparison, the staggered central scheme and the kinetic flux-vector splitting (KFVS) method are also implemented to the same model. The robustness and efficiency of central upwind scheme is demonstrated by the numerical results.

Automatic tissue characterization from ultrasound imagery

NASA Astrophysics Data System (ADS)

Kadah, Yasser M.; Farag, Aly A.; Youssef, Abou-Bakr M.; Badawi, Ahmed M.

1993-08-01

In this work, feature extraction algorithms are proposed to extract the tissue characterization parameters from liver images. Then the resulting parameter set is further processed to obtain the minimum number of parameters representing the most discriminating pattern space for classification. This preprocessing step was applied to over 120 pathology-investigated cases to obtain the learning data for designing the classifier. The extracted features are divided into independent training and test sets and are used to construct both statistical and neural classifiers. The optimal criteria for these classifiers are set to have minimum error, ease of implementation and learning, and the flexibility for future modifications. Various algorithms for implementing various classification techniques are presented and tested on the data. The best performance was obtained using a single layer tensor model functional link network. Also, the voting k-nearest neighbor classifier provided comparably good diagnostic rates.

Use of Patients With Diarrhea Who Test Negative for Rotavirus as Controls to Estimate Rotavirus Vaccine Effectiveness Through Case-Control Studies.

PubMed

Tate, Jacqueline E; Patel, Manish M; Cortese, Margaret M; Payne, Daniel C; Lopman, Benjamin A; Yen, Catherine; Parashar, Umesh D

2016-05-01

Case-control studies are often performed to estimate postlicensure vaccine effectiveness (VE), but the enrollment of controls can be challenging, time-consuming, and costly. We evaluated whether children enrolled in the same hospital-based diarrheal surveillance used to identify rotavirus cases but who test negative for rotavirus (test-negative controls) can be considered a suitable alternative to nondiarrheal hospital or community-based control groups (traditional controls). We compared calculated VE estimates as a function of varying values of true VE, attack rates of rotavirus and nonrotavirus diarrhea in the population, and sensitivity and specificity of the rotavirus enzyme immunoasssay. We also searched the literature to identify rotavirus VE studies that used traditional and test-negative control groups and compared VE estimates obtained using the different control groups. Assuming a 1% attack rate for severe rotavirus diarrhea, a 3% attack rate for severe nonrotavirus diarrhea in the population, a test sensitivity of 96%, and a specificity of 100%, the calculated VE estimates using both the traditional and test-negative control groups closely approximated the true VE for all values from 30% to 100%. As true VE decreased, the traditional case-control approach slightly overestimated the true VE and the test-negative case-control approach slightly underestimated this estimate, but the absolute difference was only ±0.2 percentage points. Field VE estimates from 10 evaluations that used both traditional and test-negative control groups were similar regardless of control group used. The use of rotavirus test-negative controls offers an efficient and cost-effective approach to estimating rotavirus VE through case-control studies. Published by Oxford University Press for the Infectious Diseases Society of America 2016. This work is written by (a) US Government employee(s) and is in the public domain in the US.

An audit of the contribution to post-mortem examination diagnosis of individual analyte results obtained from biochemical analysis of the vitreous.

PubMed

Mitchell, Rebecca; Charlwood, Cheryl; Thomas, Sunethra Devika; Bellis, Maria; Langlois, Neil E I

2013-12-01

Biochemical analysis of the vitreous humor from the eye is an accepted accessory test for post-mortem investigation of cause of death. Modern biochemical analyzers allow testing of a range of analytes from a sample. However, it is not clear which analytes should be requested in order to prevent unnecessary testing (and expense). The means and standard deviation of the values obtained from analysis of the vitreous humor for sodium, potassium, chloride, osmolality, glucose, ketones (β-hydroxybutyrate), creatinine, urea, calcium, lactate, and ammonia were calculated from which the contribution of each analyte was reviewed in the context of post-mortem findings and final cause of death. For sodium 32 cases were regarded as high (more than one standard deviation above the mean), from which 9 contributed to post-mortem diagnosis [drowning (4), heat related death (2), diabetic hyperglycemia (2), and dehydration (1)], but 25 low values (greater than one standard deviation below the mean) made no contribution. For chloride 29 high values contributed to 4 cases--3 drowning and 1 heat-related, but these were all previously identified by a high sodium level. There were 29 high and 35 low potassium values, none of which contributed to determining the final cause of death. Of 22 high values of creatinine, 12 contributed to a diagnosis of renal failure. From 32 high values of urea, 18 contributed to 16 cases of renal failure (2 associated with diabetic hyperglycemia), 1 heat-related death, and one case with dehydration. Osmolarity contributed to 12 cases (5 heat-related, 4 diabetes, 2 renal failure, and 1 dehydration) from 36 high values. There was no contribution from 32 high values and 19 low values of calcium and there was no contribution from 4 high and 2 low values of ammonia. There were 11 high values of glucose, which contributed to the diagnosis of 6 cases of diabetic hyperglycemia and 21 high ketone levels contributed to 8 cases: 4 diabetic ketosis, 3 hypothermia, 3 ketosis of unknown cause, and 2 alcohol related deaths. A high lactate was identified in 25 cases, which contributed to 1 case with a diagnosis of metformin toxicity (1), but none of the 22 low lactate values contributed. The results of this audit have been used to reduce vitreous biochemistry test requests for sodium, osmolality, glucose, ketones, urea, and creatinine in most cases. Critical appraisal of each part of the post-mortem process should be undertaken to provide evidence to justify any investigative methods used in an autopsy.

Testing of Binders Toxicological Effects

NASA Astrophysics Data System (ADS)

Strokova, V.; Nelyubova, V.; Rykunova, M.

2017-11-01

The article presents the results of a study of the toxicological effect of binders with different compositions on the vital activity of plant and animal test-objects. The analysis of the effect on plant cultures was made on the basis of the phytotesting data. The study of the effect of binders on objects of animal origin was carried out using the method of short-term testing. Based on the data obtained, binders are ranked according to the degree of increase in the toxic effect: Gypsum → Portland cement → Slag Portland cement. Regardless of the test-object type, the influence of binders is due to the release of various elements (calcium ions or heavy metals) into the solution. In case of plant cultures, the saturation of the solution with elements has a positive effect (there is no inhibitory effect), and in case of animal specimens - an increase in the toxic effect.

Adaption of unstructured meshes using node movement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, J.G.; McRae, V.D.S.

1996-12-31

The adaption algorithm of Benson and McRae is modified for application to unstructured grids. The weight function generation was modified for application to unstructured grids and movement was limited to prevent cross over. A NACA 0012 airfoil is used as a test case to evaluate the modified algorithm when applied to unstructured grids and compared to results obtained by Warren. An adaptive mesh solution for the Sudhoo and Hall four element airfoil is included as a demonstration case.

Stamping of Thin-Walled Structural Components with Magnesium Alloy AZ31 Sheets

NASA Astrophysics Data System (ADS)

Chen, Fuh-Kuo; Chang, Chih-Kun

2005-08-01

In the present study, the stamping process for manufacturing cell phone cases with magnesium alloy AZ31 sheets was studied using both the experimental approach and the finite element analysis. In order to determine the proper forming temperature and set up a fracture criterion, tensile tests and forming limit tests were first conducted to obtain the mechanical behaviors of AZ31 sheets at various elevated temperatures. The mechanical properties of Z31 sheets obtained from the experiments were then adopted in the finite element analysis to investigate the effects of the process parameters on the formability of the stamping process of cell phone cases. The finite element simulation results revealed that both the fracture and wrinkle defects could not be eliminated at the same time by adjusting blank-holder force or blank size. A drawbead design was then performed using the finite element simulations to determine the size and the location of drawbead required to suppress the wrinkle defect. An optimum stamping process, including die geometry, forming temperature, and blank dimension, was then determined for manufacturing the cell phone cases. The finite element analysis was validated by the good agreement between the simulation results and the experimental data. It confirms that the cell phone cases can be produced with magnesium alloy AZ31 sheet by the stamping process at elevated temperatures.

Enhancing TB case detection: experience in offering upfront Xpert MTB/RIF testing to pediatric presumptive TB and DR TB cases for early rapid diagnosis of drug sensitive and drug resistant TB.

PubMed

Raizada, Neeraj; Sachdeva, Kuldeep Singh; Nair, Sreenivas Achuthan; Kulsange, Shubhangi; Gupta, Radhey Shayam; Thakur, Rahul; Parmar, Malik; Gray, Christen; Ramachandran, Ranjani; Vadera, Bhavin; Ekka, Shobha; Dhawan, Shikha; Babre, Ameet; Ghedia, Mayank; Alavadi, Umesh; Dewan, Puneet; Khetrapal, Mini; Khanna, Ashwini; Boehme, Catharina; Paramsivan, Chinnambedu Nainarappan

2014-01-01

Diagnosis of pulmonary tuberculosis (PTB) in children is challenging due to difficulties in obtaining good quality sputum specimens as well as the paucibacillary nature of disease. Globally a large proportion of pediatric tuberculosis (TB) cases are diagnosed based only on clinical findings. Xpert MTB/RIF, a highly sensitive and specific rapid tool, offers a promising solution in addressing these challenges. This study presents the results from pediatric groups taking part in a large demonstration study wherein Xpert MTB/RIF testing replaced smear microscopy for all presumptive PTB cases in public health facilities across India. The study covered a population of 8.8 million across 18 programmatic sub-district level tuberculosis units (TU), with one Xpert MTB/RIF platform established at each study TU. Pediatric presumptive PTB cases (both TB and Drug Resistant TB (DR-TB)) accessing any public health facilities in study area were prospectively enrolled and tested on Xpert MTB/RIF following a standardized diagnostic algorithm. 4,600 pediatric presumptive pulmonary TB cases were enrolled. 590 (12.8%, CI 11.8-13.8) pediatric PTB were diagnosed. Overall 10.4% (CI 9.5-11.2) of presumptive PTB cases had positive results by Xpert MTB/RIF, compared with 4.8% (CI 4.2-5.4) who had smear-positive results. Upfront Xpert MTB/RIF testing of presumptive PTB and presumptive DR-TB cases resulted in diagnosis of 79 and 12 rifampicin resistance cases, respectively. Positive predictive value (PPV) for rifampicin resistance detection was high (98%, CI 90.1-99.9), with no statistically significant variation with respect to past history of treatment. Upfront access to Xpert MTB/RIF testing in pediatric presumptive PTB cases was associated with a two-fold increase in bacteriologically-confirmed PTB, and increased detection of rifampicin-resistant TB cases under routine operational conditions across India. These results suggest that routine Xpert MTB/RIF testing is a promising solution to present-day challenges in the diagnosis of PTB in pediatric patients.

Heterophile antibody interference in qualitative urine/serum hCG devices: Case report.

PubMed

Patel, Khushbu K; Gronowski, Ann M

2016-06-01

This case report investigates the origin of a false positive result on a serum qualitative human chorionic gonadotropin (hCG) device. A 46-year-old woman diagnosed with chronic myeloid leukemia presented with nausea and vomiting. A qualitative serum hCG test was interpreted as positive; however, a quantitative serum hCG test was negative (<5IU/L). To further investigate this discrepancy, the sample was pretreated with heterophilic blocking reagent (HBR). Additionally, the sample was tested on other qualitative hCG devices composed of antibodies from different animal sources. Blocking reagent from an automated quantitative immunoassay was also tested for its ability to inhibit the heterophile antibody interference. The qualitative test result was negative after pretreatment with heterophilic blocking reagent. Other devices composed of antibodies from different animal sources also demonstrated mixed results with the patient's sample. Blocking reagent obtained from the automated quantitative assay inhibited the heterophile antibody interference in the patient's sample. This case demonstrates that positive serum point-of-care hCG results should be interpreted with caution and confirmed with a quantitative serum hCG immunoassay when clinical suspicion is raised. Copyright © 2016 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Detection of moisture and moisture related phenomena from Skylab. [correlation of brightness and antenna temperature with soil moisture for Texas and Kansas test sites

NASA Technical Reports Server (NTRS)

Eagleman, J. R.; Pogge, E. C.; Moore, R. K. (Principal Investigator); Hardy, N.; Lin, W.; League, L.

1974-01-01

The author has identified the following significant results. Skylab 2 data for June 5, 1973 (Texas site) relates favorably with previously calculated aircraft data when correlating brightness temperature to soil moisture. However, more detailed work is needed to determine the corrected surface temperature. In addition, correlations between the S194 antenna temperature and soil moisture have been obtained for five sets of Skylab data. The best correlations were obtained for the surface to one inch depth in four cases and for surface to two inches depth for the fifth case. Correlation coefficients for the surface to one inch depth were -0.98, -0.95, -0.90, -0.82, and -0.80.

Application of a Resilience Framework to Military Installations: A Methodology for Energy Resilience Business Case Decisions

DTIC Science & Technology

2016-09-01

Some technologies that were not included in the analysis (due to site-level evaluations), but could be added in the future, include: wind turbines ...number of entities involved in the procurement, operation, maintenance , testing, and fueling of the generators, detailed inventory and cost data is...difficult to obtain. The DPW is often understaffed, leading to uneven testing and maintenance of the equipment despite their best efforts. The

Application of a Resilience Framework to Military Installations: A Methodology for Energy Resilience Business Case Decisions

DTIC Science & Technology

2016-10-04

analysis (due to site-level evaluations), but could be added in the future, include: wind turbines (the installations we visited were not interested due...procurement, operation, maintenance , testing, and fueling of the generators, detailed inventory and cost data is difficult to obtain. The DPW is often...understaffed, leading to uneven testing and maintenance of the equipment despite their best efforts. The reliability of these generators is typically

Spatial Convergence of Three Dimensional Turbulent Flows

NASA Technical Reports Server (NTRS)

Park, Michael A.; Anderson, W. Kyle

2016-01-01

Finite-volume and finite-element schemes, both implemented within the FUN3D flow solver, are evaluated for several test cases described on the Turbulence-Modeling Resource (TMR) web site. The cases include subsonic flow over a hemisphere cylinder, subsonic flow over a swept bump configuration, and supersonic flow in a square duct. The finite- volume and finite-element schemes are both used to obtain solutions for the first two cases, whereas only the finite-volume scheme is used for the supersonic duct. For the hemisphere cylinder, finite-element solutions obtained on tetrahedral meshes are compared with finite- volume solutions on mixed-element meshes. For the swept bump, finite-volume solutions have been obtained for both hexahedral and tetrahedral meshes and are compared with finite-element solutions obtained on tetrahedral meshes. For the hemisphere cylinder and the swept bump, solutions are obtained on a series of meshes with varying grid density and comparisons are made between drag coefficients, pressure distributions, velocity profiles, and profiles of the turbulence working variable. The square duct shows small variation due to element type or the spatial accuracy of turbulence model convection. It is demonstrated that the finite-element scheme on tetrahedral meshes yields similar accuracy as the finite- volume scheme on mixed-element and hexahedral grids, and demonstrates less sensitivity to the mesh topology (biased tetrahedral grids) than the finite-volume scheme.

Diagnosis of aerobic vaginitis by quantitative real-time PCR.

PubMed

Rumyantseva, T A; Bellen, G; Savochkina, Y A; Guschin, A E; Donders, G G G

2016-07-01

To evaluate a real-time PCR-based technique to quantify bacteria associated with aerobic vaginitis (AV) as a potential test. Vaginal samples from 100 women were tested by wet-mount microscopy, gram stain and quantitative real-time PCR targeting Enterobacteriacea, Staphylococcus spp., Streptococcus spp., Enterococcus spp., Escherichia coli, Streptococcus agalactiae, S. aureus; Lactobacillus spp. AV diagnosis obtained by wet-mount microscopy was used as reference. Some level of AV was diagnosed in 23 (23.7 %) cases. Various concentrations of Enterobacteriacea, Staphylococcus spp., Streptococcus spp. were detected an all patients. Enterococcus spp. were detected in 76 (78.3 %) cases. Summarized concentrations of aerobes were tenfold higher in AV-positive compared to AV-negative cases [7.30lg vs 6.06lg (p = 0.02)]. Concentrations of aerobes in severe, moderate and light AV cases did not vary significantly (p = 0.14). Concentration of lactobacilli was 1000-fold lower in AV-positive cases compared to normal cases (5.3lg vs 8.3lg, p < 0.0001). Streptococcus spp. dominated in the majority of AV-positive cases [19/22 (86.4 %) samples]. The relation of high loads of aerobes to the low numbers of Lactobacilli are a reliable marker for the presence of AV and could substitute microscopy as a test. PCR may be a good standardized substitution for AV diagnosis in settings where well-trained microscopists are lacking.

Pulmonary involvement of secondary syphilis.

PubMed

Ogawa, Yoshihiko; Imai, Yuichiro; Yoshihara, Shingo; Fujikura, Hiroyuki; Hirai, Nobuyasu; Sato, Masatoshi; Ogawa, Taku; Uno, Kenji; Kasahara, Kei; Yano, Hisakazu; Mikasa, Keiichi

2018-01-01

Pulmonary involvement in secondary syphilis is considered a rare occurrence; however, the number of cases has increased in the 2000s. This is likely due to the increased use of computed tomography scans and molecular diagnostic testing. We report a case of an HIV-positive man with pleural chest pain and bilateral subpleural nodules on chest computed tomography. His rapid plasma reagin and Treponema pallidum hemagglutination tests were positive, and the specimen of one of the pulmonary nodules obtained by transthoracic biopsy was positive for the polA gene of Treponema pallidum. Since clinical manifestations of syphilis are highly variable, clinicians should bear in mind that pleural chest pain with bilateral subpleural nodules can be caused by pulmonary syphilis.

Comparative analysis of the processing accuracy of high strength metal sheets by AWJ, laser and plasma

NASA Astrophysics Data System (ADS)

Radu, M. C.; Schnakovszky, C.; Herghelegiu, E.; Tampu, N. C.; Zichil, V.

2016-08-01

Experimental tests were carried out on two high-strength steel materials (Ramor 400 and Ramor 550). Quantification of the dimensional accuracy was achieved by measuring the deviations from some geometric parameters of part (two lengths and two radii). It was found that in case of Ramor 400 steel, at the jet inlet, the deviations from the part radii are quite small for all the three analysed processes. Instead for the linear dimensions, the deviations are small only in case of laser cutting. At the jet outlet, the deviations raised in small amount compared to those obtained at the jet inlet for both materials as well as for all the three processes. Related to Ramor 550 steel, at the jet inlet the deviations from the part radii are very small in case of AWJ and laser cutting but larger in case of plasma cutting. At the jet outlet, the deviations from the part radii are very small for all processes; in case of linear dimensions, there was obtained very small deviations only in the case of laser processing, the other two processes leading to very large deviations.

Test Report for MSFC Test No. 83-2: Pressure scaled water impact test of a 12.5 inch diameter model of the Space Shuttle solid rocket booster filament wound case and external TVC PCD

NASA Technical Reports Server (NTRS)

1983-01-01

Water impact tests using a 12.5 inch diameter model representing a 8.56 percent scale of the Space Shuttle Solid Rocket Booster configuration were conducted. The two primary objectives of this SRB scale model water impact test program were: 1. Obtain cavity collapse applied pressure distributions for the 8.56 percent rigid body scale model FWC pressure magnitudes as a function of full-scale initial impact conditions at vertical velocities from 65 to 85 ft/sec, horizontal velocities from 0 to 45 ft/sec, and angles from -10 to +10 degrees. 2. Obtain rigid body applied pressures on the TVC pod and aft skirt internal stiffener rings at initial impact and cavity collapse loading events. In addition, nozzle loads were measured. Full scale vertical velocities of 65 to 85 ft/sec, horizontal velocities of 0 to 45 ft/sec, and impact angles from -10 to +10 degrees simulated.

Monroe, Utah, Hydrothermal System: Results from Drilling of Test Wells MC1 and MC2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapman, D.S.; Harrison, Roger

1978-10-01

Following detailed geological (Parry et al., 1976; Miller, 1976) and geophysical (Mase, Chapman, and Ward, 1978; Kilty, Mase, and Chapman, 1978) studies of the Monroe, Utah hydrothermal system, a program of drilling two intermediate depth test wells was undertaken. The objectives of the test well drilling were three-fold: (1) to obtain structural information bearing on the poorly known dip of the Sevier Fault, (2) to obtain temperature information below the shallow depths (approximately 300 ft.) sampled in the first phase of exploration, and (3) to provide cased wells which could act as monitor wells during the production phase of themore » project. The test well drilling was seen to be vital to the selection of a site for a production well. This report describes the results from the drilling of the two test wells, designated MC1 and MC2, and offers interpretation of the hydrothermal system which may be used as a basis for selecting production wells.« less

47 CFR 101.129 - Transmitter location.

Code of Federal Regulations, 2013 CFR

2013-10-01

... survey tests to be made pursuant to an experimental license under part 5 of this chapter. In such cases... data obtained from such surveys and its analysis, including a description of the methods used and the name, address and qualifications of the engineer making the survey, must be supplied to the Commission...

47 CFR 101.129 - Transmitter location.

Code of Federal Regulations, 2014 CFR

2014-10-01

... survey tests to be made pursuant to an experimental license under part 5 of this chapter. In such cases... data obtained from such surveys and its analysis, including a description of the methods used and the name, address and qualifications of the engineer making the survey, must be supplied to the Commission...

Evaluation of 12 strategies for obtaining second opinions to improve interpretation of breast histopathology: simulation study.

PubMed

Elmore, Joann G; Tosteson, Anna Na; Pepe, Margaret S; Longton, Gary M; Nelson, Heidi D; Geller, Berta; Carney, Patricia A; Onega, Tracy; Allison, Kimberly H; Jackson, Sara L; Weaver, Donald L

2016-06-22

 To evaluate the potential effect of second opinions on improving the accuracy of diagnostic interpretation of breast histopathology.  Simulation study.  12 different strategies for acquiring independent second opinions.  Interpretations of 240 breast biopsy specimens by 115 pathologists, one slide for each case, compared with reference diagnoses derived by expert consensus.  Misclassification rates for individual pathologists and for 12 simulated strategies for second opinions. Simulations compared accuracy of diagnoses from single pathologists with that of diagnoses based on pairing interpretations from first and second independent pathologists, where resolution of disagreements was by an independent third pathologist. 12 strategies were evaluated in which acquisition of second opinions depended on initial diagnoses, assessment of case difficulty or borderline characteristics, pathologists' clinical volumes, or whether a second opinion was required by policy or desired by the pathologists. The 240 cases included benign without atypia (10% non-proliferative, 20% proliferative without atypia), atypia (30%), ductal carcinoma in situ (DCIS, 30%), and invasive cancer (10%). Overall misclassification rates and agreement statistics depended on the composition of the test set, which included a higher prevalence of difficult cases than in typical practice.  Misclassification rates significantly decreased (P<0.001) with all second opinion strategies except for the strategy limiting second opinions only to cases of invasive cancer. The overall misclassification rate decreased from 24.7% to 18.1% when all cases received second opinions (P<0.001). Obtaining both first and second opinions from pathologists with a high volume (≥10 breast biopsy specimens weekly) resulted in the lowest misclassification rate in this test set (14.3%, 95% confidence interval 10.9% to 18.0%). Obtaining second opinions only for cases with initial interpretations of atypia, DCIS, or invasive cancer decreased the over-interpretation of benign cases without atypia from 12.9% to 6.0%. Atypia cases had the highest misclassification rate after single interpretation (52.2%), remaining at more than 34% in all second opinion scenarios.  Second opinions can statistically significantly improve diagnostic agreement for pathologists' interpretations of breast biopsy specimens; however, variability in diagnosis will not be completely eliminated, especially for breast specimens with atypia. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Evaluation of 12 strategies for obtaining second opinions to improve interpretation of breast histopathology: simulation study

PubMed Central

Tosteson, Anna NA; Pepe, Margaret S; Longton, Gary M; Nelson, Heidi D; Geller, Berta; Carney, Patricia A; Onega, Tracy; Allison, Kimberly H; Jackson, Sara L; Weaver, Donald L

2016-01-01

Objective To evaluate the potential effect of second opinions on improving the accuracy of diagnostic interpretation of breast histopathology. Design Simulation study. Setting 12 different strategies for acquiring independent second opinions. Participants Interpretations of 240 breast biopsy specimens by 115 pathologists, one slide for each case, compared with reference diagnoses derived by expert consensus. Main outcome measures Misclassification rates for individual pathologists and for 12 simulated strategies for second opinions. Simulations compared accuracy of diagnoses from single pathologists with that of diagnoses based on pairing interpretations from first and second independent pathologists, where resolution of disagreements was by an independent third pathologist. 12 strategies were evaluated in which acquisition of second opinions depended on initial diagnoses, assessment of case difficulty or borderline characteristics, pathologists’ clinical volumes, or whether a second opinion was required by policy or desired by the pathologists. The 240 cases included benign without atypia (10% non-proliferative, 20% proliferative without atypia), atypia (30%), ductal carcinoma in situ (DCIS, 30%), and invasive cancer (10%). Overall misclassification rates and agreement statistics depended on the composition of the test set, which included a higher prevalence of difficult cases than in typical practice. Results Misclassification rates significantly decreased (P<0.001) with all second opinion strategies except for the strategy limiting second opinions only to cases of invasive cancer. The overall misclassification rate decreased from 24.7% to 18.1% when all cases received second opinions (P<0.001). Obtaining both first and second opinions from pathologists with a high volume (≥10 breast biopsy specimens weekly) resulted in the lowest misclassification rate in this test set (14.3%, 95% confidence interval 10.9% to 18.0%). Obtaining second opinions only for cases with initial interpretations of atypia, DCIS, or invasive cancer decreased the over-interpretation of benign cases without atypia from 12.9% to 6.0%. Atypia cases had the highest misclassification rate after single interpretation (52.2%), remaining at more than 34% in all second opinion scenarios. Conclusion Second opinions can statistically significantly improve diagnostic agreement for pathologists’ interpretations of breast biopsy specimens; however, variability in diagnosis will not be completely eliminated, especially for breast specimens with atypia. PMID:27334105

Testing for genetic association taking into account phenotypic information of relatives.

PubMed

Uh, Hae-Won; Wijk, Henk Jan van der; Houwing-Duistermaat, Jeanine J

2009-12-15

We investigated efficient case-control association analysis using family data. The outcome of interest was coronary heart disease. We employed existing and new methods that take into account the correlations among related individuals to obtain the proper type I error rates. The methods considered for autosomal single-nucleotide polymorphisms were: 1) generalized estimating equations-based methods, 2) variance-modified Cochran-Armitage (MCA) trend test incorporating kinship coefficients, and 3) genotypic modified quasi-likelihood score test. Additionally, for X-linked single-nucleotide polymorphisms we proposed a two-degrees-of-freedom test. Performance of these methods was tested using Framingham Heart Study 500 k array data.

Robust Flutter Analysis for Aeroservoelastic Systems

NASA Astrophysics Data System (ADS)

Kotikalpudi, Aditya

The dynamics of a flexible air vehicle are typically described using an aeroservoelastic model which accounts for interaction between aerodynamics, structural dynamics, rigid body dynamics and control laws. These subsystems can be individually modeled using a theoretical approach and experimental data from various ground tests can be combined into them. For instance, a combination of linear finite element modeling and data from ground vibration tests may be used to obtain a validated structural model. Similarly, an aerodynamic model can be obtained using computational fluid dynamics or simple panel methods and partially updated using limited data from wind tunnel tests. In all cases, the models obtained for these subsystems have a degree of uncertainty owing to inherent assumptions in the theory and errors in experimental data. Suitable uncertain models that account for these uncertainties can be built to study the impact of these modeling errors on the ability to predict dynamic instabilities known as flutter. This thesis addresses the methods used for modeling rigid body dynamics, structural dynamics and unsteady aerodynamics of a blended wing design called the Body Freedom Flutter vehicle. It discusses the procedure used to incorporate data from a wide range of ground based experiments in the form of model uncertainties within these subsystems. Finally, it provides the mathematical tools for carrying out flutter analysis and sensitivity analysis which account for these model uncertainties. These analyses are carried out for both open loop and controller in the loop (closed loop) cases.

Implementation of maternal blood cell-free DNA testing in early screening for aneuploidies.

PubMed

Gil, M M; Quezada, M S; Bregant, B; Ferraro, M; Nicolaides, K H

2013-07-01

To explore the feasibility of routine maternal blood cell-free (cf) DNA testing in screening for trisomies 21, 18 and 13 at 10 weeks' gestation. In this prospective study, women attending The Fetal Medicine Centre in London, UK, between October 2012 and April 2013, with singleton pregnancy and live fetus with CRL 32-45 mm, were screened for trisomies 21, 18 and 13 by cfDNA testing at 10 weeks and the combined test at 12 weeks. cfDNA testing was performed in 1005 singleton pregnancies with a median maternal age of 37 (range, 20-49) years. Risks for trisomies were provided for 957 (95.2%) cases and in 98.0% these were available within 14 days from sampling. In 48 (4.8%) cases no result was provided due to problems with delivery to the laboratory, low fetal fraction or assay failure. Repeat sampling was performed in 40 cases and a result obtained in 27 (67.5%) of these. In 11 cases the risk score for trisomy 21 and in five cases that for trisomy 18 was > 99%, in one the risk for trisomy 13 was 34% and in 968 the risk for each of the three trisomies was < 0.01%. The suspected trisomies were confirmed by karyotyping after chorionic villus sampling (CVS), except in one case of trisomy 18 in which the karyotype was normal. On the basis of the maternal age distribution of the study population, the expected and observed numbers for each of the three trisomies were similar. Both cfDNA and combined testing detected all trisomies, but the estimated false-positive rates (FPR) were 0.1% and 3.4%, respectively. Routine screening for trisomies 21, 18 and 13 by cfDNA testing at 10 weeks is feasible and has a lower FPR than does combined testing, but abnormal results require confirmation by CVS. Copyright © 2013 ISUOG. Published by John Wiley & Sons, Ltd.

Infants' development of object permanence: a refined methodology and new evidence of Piaget's hypothesized ordinality.

PubMed

Kramer, J A; Hill, K T; Cohen, L B

1975-03-01

To investigate Piaget's theory of object concept development, a series of 6 tasks was administered in a combined longitudinal/cross-sectional design incorporating a number of methodological controls. The tasks spanned the entire sensorimotor period and included single versus sequential displacements combined with visible or invisible hidings. 36 infants from 5 to 32 months of age at initial testing were drawn equally from day-care and home settings. All infants received the 6 tasks during each of 3 testing sessions over a 6-month period. Clear evidence was obtained for task ordinality as proposed by Piaget, with ordinality coefficients ranging from .71 to .82 for the 3 testing sessions. Performance changes across the 3 sessions were also ordinal in 80% of the cases. Expected age, task, and session effects and accompanying interactions were also obtained.

The Column Strength of Two Extruded Aluminum-Alloy H-Sections

NASA Technical Reports Server (NTRS)

Osgood, William R; Holt, Marshall

1939-01-01

Extruded aluminum-alloy members of various cross sections are used in aircraft as compression members either singly or as stiffeners for aluminum-alloy sheet. In order to design such members, it is necessary to know their column strength or, in the case of stiffeners, the value of the double modulus, which is best obtained for practical purposes from column tests. Column tests made on two extruded h-sections are described, and column formulas and formulas for the ratio of the double modulus to Young's modulus, based on the tests, are given.

Use of adaptive walls in 2D tests

NASA Technical Reports Server (NTRS)

Archambaud, J. P.; Chevallier, J. P.

1984-01-01

A new method for computing the wall effects gives precise answers to some questions arising in adaptive wall concept applications: length of adapted regions, fairings with up and downstream regions, residual misadjustments effects, reference conditions. The acceleration of the iterative process convergence and the development of an efficient technology used in CERT T2 wind tunnels give in a single run the required test conditions. Samples taken from CAST 7 tests demonstrate the efficiency of the whole process to obtain significant results with considerations of tridimensional case extension.

Test wells T27 and T28, White Sands Missile Range, Dona Ana County, New Mexico

USGS Publications Warehouse

Myers, R.G.; Pinckley, K.M.

1985-01-01

Two test wells, T27 and T28, were drilled at White Sands Missile Range in south-central New Mexico as part of a joint military training program sponsored by the U.S. Army in February and March 1983. Test wells T27 and T28 were drilled as observation wells in the vicinity of the Liquid Propellant Storage Area. Information obtained from these wells includes lithologic logs, driller 's logs, and borehole-geophysical logs from the cased wells. (USGS)

Preliminary investigation of the transmission of tuberculosis between farmers and their cattle in smallholder farms in northwestern Ethiopia: a cross-sectional study.

PubMed

Nuru, Anwar; Mamo, Gezahegne; Zewude, Aboma; Mulat, Yitayal; Yitayew, Gashaw; Admasu, Aschalew; Medhin, Girmay; Pieper, Rembert; Ameni, Gobena

2017-01-07

The feeding habits and close physical contact between Ethiopian farmers and their cattle promote the transmission of tuberculosis (TB) between the farmers and their cattle. This study aimed to investigate the transmission of TB between farmers and their cattle in smallholder farms in northwestern Ethiopia. A total of 70 human TB lymphadenitis (TBLN) cases visiting the Felegehiwot Comprehensive Specialized Hospital in Bahir Dar City and 660 cattle were investigated. Half of the cattle were owned by households with TB cases, and the remaining half by TB free households. Among the 70 human TBLN patients interviewed, 65.7% (46 out of 70) of the respondents were not aware of zoonotic TB, and 67.1% (47/70) of them consumed raw milk. Positive cultures of TB were obtained in 40 of the 70 cases where TBLN tests were positive with fine needle aspiration cytology. Spoligotyping resulted in 31 different patterns, of which 25 isolates were Mycobacterium (M.) tuberculosis, and the remaining were M. africanum (4 isolates) and M. bovis (2 isolates). None of the animals showed positive test results for bovine TB by comparative intradermal tuberculin test. Based on the identification of M. bovis from two patients diagnosed with TBLN, we obtained preliminary evidence of zoonotic transmission of TB in northwestern Ethiopia. We did not identify a direct route of transmission between cattle and its owners. This is the objective of further investigations.

Comparative assessment of pressure field reconstructions from particle image velocimetry measurements and Lagrangian particle tracking

NASA Astrophysics Data System (ADS)

van Gent, P. L.; Michaelis, D.; van Oudheusden, B. W.; Weiss, P.-É.; de Kat, R.; Laskari, A.; Jeon, Y. J.; David, L.; Schanz, D.; Huhn, F.; Gesemann, S.; Novara, M.; McPhaden, C.; Neeteson, N. J.; Rival, D. E.; Schneiders, J. F. G.; Schrijer, F. F. J.

2017-04-01

A test case for pressure field reconstruction from particle image velocimetry (PIV) and Lagrangian particle tracking (LPT) has been developed by constructing a simulated experiment from a zonal detached eddy simulation for an axisymmetric base flow at Mach 0.7. The test case comprises sequences of four subsequent particle images (representing multi-pulse data) as well as continuous time-resolved data which can realistically only be obtained for low-speed flows. Particle images were processed using tomographic PIV processing as well as the LPT algorithm `Shake-The-Box' (STB). Multiple pressure field reconstruction techniques have subsequently been applied to the PIV results (Eulerian approach, iterative least-square pseudo-tracking, Taylor's hypothesis approach, and instantaneous Vortex-in-Cell) and LPT results (FlowFit, Vortex-in-Cell-plus, Voronoi-based pressure evaluation, and iterative least-square pseudo-tracking). All methods were able to reconstruct the main features of the instantaneous pressure fields, including methods that reconstruct pressure from a single PIV velocity snapshot. Highly accurate reconstructed pressure fields could be obtained using LPT approaches in combination with more advanced techniques. In general, the use of longer series of time-resolved input data, when available, allows more accurate pressure field reconstruction. Noise in the input data typically reduces the accuracy of the reconstructed pressure fields, but none of the techniques proved to be critically sensitive to the amount of noise added in the present test case.

Identification of exponent from load-deformation relation for soft materials from impact tests

NASA Astrophysics Data System (ADS)

Ciornei, F. C.; Alaci, S.; Romanu, I. C.; Ciornei, M. C.; Sopon, G.

2018-01-01

When two bodies are brought into contact, the magnitude of occurring reaction forces increase together with the amplitude of deformations. The load-deformation dependency of two contacting bodies is described by a function having the form F = Cxα . An accurate illustration of this relationship assumes finding the precise coefficient C and exponent α. This representation proved to be very useful in hardness tests, in dynamic systems modelling or in considerations upon the elastic-plastic ratio concerning a Hertzian contact. The classical method for identification of the exponent consists in finding it from quasi-static tests. The drawback of the method is the fact that the accurate estimation of the exponent supposes precise identification of the instant of contact initiation. To overcome this aspect, the following observation is exploited: during an impact process, the dissipated energy is converted into heat released by internal friction in the materials and energy for plastic deformations. The paper is based on the remark that for soft materials the hysteresis curves obtained for a static case are similar to the ones obtained for medium velocities. Furthermore, utilizing the fact that for the restitution phase the load-deformation dependency is elastic, a method for finding the α exponent for compression phase is proposed. The maximum depth of the plastic deformations obtained for a series of collisions, by launching, from different heights, a steel ball in free falling on an immobile prism made of soft material, is evaluated by laser profilometry method. The condition that the area of the hysteresis loop equals the variation of kinetical energy of the ball is imposed and two tests are required for finding the exponent. Five collisions from different launching heights of the ball were taken into account. For all the possible impact-pair cases, the values of the exponent were found and close values were obtained.

Veterinary Forensic Toxicology.

PubMed

Gwaltney-Brant, S M

2016-09-01

Veterinary pathologists working in diagnostic laboratories are sometimes presented with cases involving animal poisonings that become the object of criminal or civil litigation. Forensic veterinary toxicology cases can include cases involving animal cruelty (malicious poisoning), regulatory issues (eg, contamination of the food supply), insurance litigation, or poisoning of wildlife. An understanding of the appropriate approach to these types of cases, including proper sample collection, handling, and transport, is essential so that chain of custody rules are followed and proper samples are obtained for toxicological analysis. Consultation with veterinary toxicologists at the diagnostic laboratory that will be processing the samples before, during, and after the forensic necropsy can help to ensure that the analytical tests performed are appropriate for the circumstances and findings surrounding the individual case. © The Author(s) 2016.

[Ultrabraid SUTURE WITH FOOTPRINT RIVET FOR ANTERIOR CRUCIATE LIGAMENT TIBIAL EMINENCE AVULSION FRACTURE IN ADOLESCENTS UNDER ARTHROSCOPY].

PubMed

Liang, Jinying; Zheng, Jiapeng; Ll, Qiang; Zhong, Shuyu; Chen, Minzhen

2015-06-01

To investigate the clinical effects of the Ultrabraid suture with FOOTPRINT rivet by arthroscopic technique for the treatment of anterior cruciate ligament (ACL) tibial eminence avulsion fracture. Between May 2011 and December 2013, 19 adolescent patients with ACL tibial eminence avulsion fracture were treated with arthroscopic reduction and fixation by Ultrabraid sutures with FOOTPRINT rivet. There were 13 males and 6 females with an average age of 15.8 years (range, 8-18 years). The left knees were involved in 10 cases and the right knees in 9 cases. The injury causes included traffic accident injury in 8 cases, sport injury in 6 cases, and sprain injury in 5 cases. Three patients had old fractures, and the others had fresh fractures. The results of Lachman test and anterior drawer test were both positive. The International Knee Documentation Committee (IKDC) subject score was 54.2 ± 4.0. Based on Meyers-McKeever classification, there were 3 cases of type II, 10 cases of type III, and 6 cases of type IV. The operation time was 50-60 minutes (mean, 55.2 minutes). X-ray film showed satisfactory fracture reduction at 1 day after operation. Primary healing of incision was obtained with no infection. Eighteen patients were followed up for 1-3 years (mean, 1.7 years). All fractures healed with smooth joint surface on the X-ray film at 3 months after operation. The results of Lachman test and anterior drawer test were both negative in 17 cases, and the results was negative for anterior drawer test and was weakly positive for Lachman test in 1 case. The IKDC subject score was significantly improved to 96.1 ± 2.1 at last follow-up (t = 34.600, P = 0.000). It could achieve early restoration of knee joint function to treat the ACL tibial eminence avulsion fracture by arthroscopic technique of the Ultrabraid suture with FOOTPRINT rivet because of satisfactory reduction, reliable fixation, small wound, and early rehabilitation.

A cross-sectional epidemiological study of domestic animals related to human leptospirosis cases in Nicaragua.

PubMed

Flores, Byron J; Pérez-Sánchez, Tania; Fuertes, Héctor; Sheleby-Elías, Jessica; Múzquiz, José Luis; Jirón, William; Duttmann, Christianne; Halaihel, Nabil

2017-06-01

Leptospirosis is one of the most extended zoonosis worldwide and humans become infected most commonly through contact with the urine of carrier animals, either directly or via contaminated water or soil. The aim in this study was to analyse the epidemiological behaviour of Leptospira spp., from domestic animals around the sites of human leptospirosis cases in Nicaragua, from 2007 through 2013. We report the results of a cross-sectional epidemiological study with a non-probability sampling of blood (n=3050) and urine (n=299) from Domestic Animals (DA) around the sites of human leptospirosis cases in Nicaragua. We analysed data obtained through Microscopic Agglutination Test (MAT), in-vitro culture, real time PCR and sequencing of lfb1 locus. Frequencies of 30.31% (95% CI: 28.66-31.95) and 15.38% (95% CI: 11.12-19.64) were obtained from serological test and from in-vitro culture, respectively. Although similar frequencies from serology test (P≥0.05) were found in DA species, in-vitro culture frequencies were significantly higher from bovine, equine and sheep (P<0.05) in comparison with swine and canine species. Ten serogroups of pathogenic Leptospira spp. were encountered, with the highest presence of Icterohaemorrhagiae serogroup 34.65% (95% CI: 29.35-39.94). We identified 7 samples homologous to L. interrogans species Pyrogenes serovar and 3 samples as L. noguchii Louisiana or Panama serovars by analysis of lfb1 sequences. We were able to establish a temporal and spatial correlation from DA and cumulative incidence of human cases. Therefore an effective epidemiological surveillance should be implemented with a specific control program toward DA in order to reduce human leptospirosis incidence. Copyright © 2017 Elsevier B.V. All rights reserved.

Rotavirus vaccine effectiveness in Hong Kong children.

PubMed

Yeung, Karene Hoi Ting; Tate, Jacqueline E; Chan, Ching Ching; Chan, Martin C W; Chan, Paul K S; Poon, Kin Hung; Siu, Sylvia Luen Yee; Fung, Genevieve Po Gee; Ng, Kwok Leung; Chan, Iris Mei Ching; Yu, Pui Tak; Ng, Chi Hang; Lau, Yu Lung; Nelson, E Anthony S

2016-09-22

Rotavirus is a common infectious cause of childhood hospitalisation in Hong Kong. Rotavirus vaccines have been used in the private sector since licensure in 2006 but have not been incorporated in the government's universal Childhood Immunisation Programme. This study aimed to evaluate rotavirus vaccine effectiveness against hospitalisation. This case-control study was conducted in the 2014/2015 rotavirus season in six public hospitals. Hospitalised acute gastroenteritis patients meeting inclusion criteria were recruited and copies of their immunisation records were collected. Case-patients were defined as enrolled subjects with stool specimens obtained in the first 48h of hospitalisation that tested positive for rotavirus, whereas control-patients were those with stool specimens obtained in the first 48h of hospitalisation testing negative for rotavirus. Vaccine effectiveness for administration of at least one dose of either Rotarix(®) (GlaxoSmithKline Biologicals) or RotaTeq(®) (Merck Research Laboratories) was calculated as 1 minus the odds ratio for rotavirus vaccination history for case-patients versus control-patients. Among the 525 eligible subjects recruited, immunisation records were seen in 404 (77%) subjects. 31% (162/525 and 126/404) tested positive for rotavirus. In the 404 subjects assessed for vaccine effectiveness, 2.4% and 24% received at least 1 dose of either rotavirus vaccine in case- and control-patients respectively. The unmatched vaccine effectiveness against hospitalisation for administration of at least one dose of either rotavirus vaccines was 92% (95% confidence interval [CI]: 75%, 98%). The matched analyses by age only and both age and admission date showed 96% (95% CI: 72%, 100%) and 89% (95% CI: 51%, 97%) protection against rotavirus hospitalisation respectively. Rotavirus vaccine is highly effective in preventing hospitalisation from rotavirus disease in young Hong Kong children. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Hot wire anemometer measurements in the unheated air flow tests of the SRB nozzle-to-case joint

NASA Technical Reports Server (NTRS)

Ramachandran, N.

1988-01-01

Hot-Wire Anemometer measurements made in the Solid Rocket Booster (SRB) nozzle-to-case joint are discussed. The study was undertaken to glean additional information on the circumferential flow induced in the SRB nozzle joint and the effect of this flow on the insulation bonding flaws. The tests were conducted on a full-scale, 2-D representation of a 65-in long segment of the SRB nozzle joint, with unheated air as the working fluid. Both the flight Mach number and Reynolds number were matched simultaneously and different pressure gradients imposed along the joint face were investigated. Hot-wire anemometers were used to obtain velocity data for different joint gaps and debond configurations. The procedure adopted for hot-wire calibration and use is outlined and the results from the tests summarized.

STUDIES ON THE BIOLOGY OF STREPTOCOCCUS

PubMed Central

Stevens, Franklin A.; Dochez, A. R.

1924-01-01

1. Strains of hemolytic streptococci from cases of scarlet fever occurring in New York, San Francisco, Chicago, Baltimore, and Copenhagen, Denmark, all interagglutinate with immune sera prepared with these strains. 2. Sera prepared with these strains do not agglutinate pyogenic streptococci or strains isolated from cases of septic sore throat. 3. The strains obtained from the throats of patients from an epidemic of scarlet fever and the strain from the milk responsible for this epidemic fall into the scarlatinal group according to these agglutination tests. 4. Absorption tests can be carried out with these strains and sera under proper conditions. 5. A group of hemolytic streptococci biologically distinct from streptococci from other sources than scarlet fever is constantly associated with scarlatina. They constitute a group of closely related streptococci which may be identified by agglutination tests. PMID:19868913

Ultrasonic imaging for non-destructive evaluation of standing trees: effect of anisotropy on image reconstruction

NASA Astrophysics Data System (ADS)

Espinosa, Luis; Prieto, Flavio; Brancheriau, Loïc.

2017-03-01

Trees play a major ecological and sanitary role in modern cities. Nondestructive imaging methods allow to analyze the inner structures of trees, without altering their condition. In this study, we are interested on evaluating the influence of anisotropy condition in wood on the tomography image reconstruction using ultrasonic waves, by time-of-flight (TOF) estimation using the raytracing approach, a technique used particularly in the field of exploration seismography to simulate wave fronts in elastic media. Mechanical parameters from six wood species and one isotropic material were defined and their wave fronts and corresponding TOF values were obtained, using the proposed raytracing method. If the material presented anisotropy, the ray paths between the emitter and the receivers were not straight; therefore, curved rays were obtained for wood and the TOF measurements were affected. To obtain the tomographic image from the TOF measurements, the filtered back-projection algorithm was applied, a widely used technique in applications of straight ray tomography, but also commonly used in wood acoustic tomography. First, discs without inner defects for isotropic and wood materials (Spruce sample) were tested. Isotropic material resulted in a flat color image; for wood material, a gradient of velocities was obtained. After, centric and eccentric defects were tested, both for isotropic and orthotropic cases. From the results obtained for wood, when using a reconstruction algorithm intended for straight ray tomography, the images presented velocity variations from the border to the center that made difficult the discrimination of possible defects inside the samples, especially for eccentric cases.

Enhancement of the sweep efficiency of waterflooding operations by the in-situ microbial population of petroleum reservoirs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, L.R.; Vadie, A.A.; Stephens, J.O.

1995-12-31

Live cores were obtained from five reservoirs using special precautions to prevent contamination by exogenous microorganisms and minimize exposure to oxygen. The depths from which the cores were obtained ranged from 2,705 ft to 6,568 ft. Core plugs were cut radially from live cores, encased in heat-shrink plastic tubes, placed in core holders, and fitted with inlets and outlets. Nutrient additions stimulated the in-situ microbial population to increase, dissolve stratal material, produce gases, and release oil. Reduction in flow through the core plugs was observed in some cases, while in other cases flow was increased, probably due to the dissolutionmore » of carbonates in the formation. A field demonstration of the ability of the in-situ microbial population to increase oil recovery by blocking the more permeable zones of the reservoir is currently underway. This demonstration is being conducted in the North Blowhorn Creek Unit situated in Lamar County, Alabama. Live cores were obtained from a newly drilled well in the field and tested as described above. The field project involves four test patterns each including one injector, four to five producers, and a comparable control injector with its four to five producers. Nutrient injection in the field began November 1994.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di Domenico, Giovanni, E-mail: didomenico@fe.infn.it; Cardarelli, Paolo; Taibi, Angelo

Purpose: The quality of a radiography system is affected by several factors, a major one being the focal spot size of the x-ray tube. In fact, the measurement of such size is recognized to be of primary importance during acceptance tests and image quality evaluations of clinical radiography systems. The most common device providing an image of the focal spot emission distribution is a pin-hole camera, which requires a high tube loading in order to produce a measurable signal. This work introduces an alternative technique to obtain an image of the focal spot, through the processing of a single radiographmore » of a simple test object, acquired with a suitable magnification. Methods: The radiograph of a magnified sharp edge is a well-established method to evaluate the extension of the focal spot profile along the direction perpendicular to the edge. From a single radiograph of a circular x-ray absorber, it is possible to extract simultaneously the radial profiles of several sharp edges with different orientations. The authors propose a technique that allows to obtain an image of the focal spot through the processing of these radial profiles by means of a pseudo-CT reconstruction technique. In order to validate this technique, the reconstruction has been applied to the simulated radiographs of an ideal disk-shaped absorber, generated by various simulated focal spot distributions. Furthermore, the method has been applied to the focal spot of a commercially available mammography unit. Results: In the case of simulated radiographs, the results of the reconstructions have been compared to the original distributions, showing an excellent agreement for what regards both the overall distribution and the full width at half maximum measurements. In the case of the experimental test, the method allowed to obtain images of the focal spot that have been compared with the results obtained through standard techniques, namely, pin-hole camera and slit camera. Conclusions: The method was proven to be effective for simulated images and the results of the experimental test suggest that it could be considered as an alternative technique for focal spot distribution evaluation. The method offers the possibility to measure the actual focal spot size and emission distribution at the same exposure conditions as clinical routine, avoiding high tube loading as in the case of the pin-hole imaging technique.« less

X-ray focal spot reconstruction by circular penumbra analysis-Application to digital radiography systems.

PubMed

Di Domenico, Giovanni; Cardarelli, Paolo; Contillo, Adriano; Taibi, Angelo; Gambaccini, Mauro

2016-01-01

The quality of a radiography system is affected by several factors, a major one being the focal spot size of the x-ray tube. In fact, the measurement of such size is recognized to be of primary importance during acceptance tests and image quality evaluations of clinical radiography systems. The most common device providing an image of the focal spot emission distribution is a pin-hole camera, which requires a high tube loading in order to produce a measurable signal. This work introduces an alternative technique to obtain an image of the focal spot, through the processing of a single radiograph of a simple test object, acquired with a suitable magnification. The radiograph of a magnified sharp edge is a well-established method to evaluate the extension of the focal spot profile along the direction perpendicular to the edge. From a single radiograph of a circular x-ray absorber, it is possible to extract simultaneously the radial profiles of several sharp edges with different orientations. The authors propose a technique that allows to obtain an image of the focal spot through the processing of these radial profiles by means of a pseudo-CT reconstruction technique. In order to validate this technique, the reconstruction has been applied to the simulated radiographs of an ideal disk-shaped absorber, generated by various simulated focal spot distributions. Furthermore, the method has been applied to the focal spot of a commercially available mammography unit. In the case of simulated radiographs, the results of the reconstructions have been compared to the original distributions, showing an excellent agreement for what regards both the overall distribution and the full width at half maximum measurements. In the case of the experimental test, the method allowed to obtain images of the focal spot that have been compared with the results obtained through standard techniques, namely, pin-hole camera and slit camera. The method was proven to be effective for simulated images and the results of the experimental test suggest that it could be considered as an alternative technique for focal spot distribution evaluation. The method offers the possibility to measure the actual focal spot size and emission distribution at the same exposure conditions as clinical routine, avoiding high tube loading as in the case of the pin-hole imaging technique.

Lattice Boltzmann Equation On a 2D Rectangular Grid

NASA Technical Reports Server (NTRS)

Bouzidi, MHamed; DHumieres, Dominique; Lallemand, Pierre; Luo, Li-Shi; Bushnell, Dennis M. (Technical Monitor)

2002-01-01

We construct a multi-relaxation lattice Boltzmann model on a two-dimensional rectangular grid. The model is partly inspired by a previous work of Koelman to construct a lattice BGK model on a two-dimensional rectangular grid. The linearized dispersion equation is analyzed to obtain the constraints on the isotropy of the transport coefficients and Galilean invariance for various wave propagations in the model. The linear stability of the model is also studied. The model is numerically tested for three cases: (a) a vortex moving with a constant velocity on a mesh periodic boundary conditions; (b) Poiseuille flow with an arbitrasy inclined angle with respect to the lattice orientation: and (c) a cylinder &symmetrically placed in a channel. The numerical results of these tests are compared with either analytic solutions or the results obtained by other methods. Satisfactory results are obtained for the numerical simulations.

Study on the effects of flow in the volute casing on the performance of a sirocco fan

NASA Astrophysics Data System (ADS)

Adachi, Tsutomu; Sugita, Naohiro; Ohomori, Satoshi

2004-08-01

The flow at the exit from the runner blade of a centrifugal fan with forward curved blades (a sirocco fan) sometimes separates and becomes unstable. We have conducted many researches on the impeller shape of a sirocco fan, proper inlet and exit blade angles were considered to obtain optimum performance. In this paper, the casing shape were decided by changing the circumferential angle, magnifying angle and the width, 21 sorts of casings were used. Performance tests, inner flow velocity and pressure distributions were measured as well. Computational fluid dynamic calculations were also made and compared with the experimental results. Finally, the most suitable casing shape for best performance is considered.

Reliability of unaided naked-eye examination as a screening test for cervical lesions in a developing country setup.

PubMed

Darwish, Atef M; Abdulla, Sayed A; Zahran, Kamal M; Abdel-Fattah, Nermat A

2013-04-01

This study aimed to test the reliability of unaided naked-eye examination (UNEE) of the cervix as a sole cervical cancer screening test in a developing country setup compared with the standard cervical cytology. A total of 3,500 nonpregnant women aged between 25 and 55 years were included. An unlubricated bivalve speculum was inserted into the vagina under good light to visualize the cervix. A thorough UNEE of the cervix was done to detect any apparent lesions. Cervical smears were obtained using the long tip of an Ayre spatula. An additional endocervical sample was obtained by cytobrush. Women with abnormal Pap smears or visible cervical lesions by UNEE were scheduled for colposcopic examination. A biopsy specimen was obtained in every abnormal colposcopic examination. Of 3,500 cases, there were 9 (2.57%) preinvasive cervical lesions (cervical intraepithelial neoplasia 1-3) diagnosed with various diagnostic tools used in the study and confirmed by histopathologic examination. Of 3,500 cases, invasive cervical lesions were diagnosed in 6 (1.71%). The sensitivity of UNEE is much better than that of Pap smear (80% vs 60%) but less than that of colposcopy (86.7%). However, the specificity of UNEE (100%) is lower than that of Pap smear (91.16%) and better than that colposcopy (83.12%). The UNEE has a poor positive predictive value (3.75%) when compared with Pap smear (100%) and colposcopy (20%). The negative predictive values of the 3 tests were nearly comparable. Whenever access to Pap smear is limited, UNEE performed by general gynecologists and well-trained nurses is an acceptable alternative for detecting cervical premalignant or malignant lesions especially in low-resource settings.

Clinical Performance of Aspergillus PCR for Testing Serum and Plasma: a Study by the European Aspergillus PCR Initiative.

PubMed

White, P Lewis; Barnes, Rosemary A; Springer, Jan; Klingspor, Lena; Cuenca-Estrella, Manuel; Morton, C Oliver; Lagrou, Katrien; Bretagne, Stéphane; Melchers, Willem J G; Mengoli, Carlo; Donnelly, J Peter; Heinz, Werner J; Loeffler, Juergen

2015-09-01

Aspergillus PCR testing of serum provides technical simplicity but with potentially reduced sensitivity compared to whole-blood testing. With diseases for which screening to exclude disease represents an optimal strategy, sensitivity is paramount. The associated analytical study confirmed that DNA concentrations were greater in plasma than those in serum. The aim of the current investigation was to confirm analytical findings by comparing the performance of Aspergillus PCR testing of plasma and serum in the clinical setting. Standardized Aspergillus PCR was performed on plasma and serum samples concurrently obtained from hematology patients in a multicenter retrospective anonymous case-control study, with cases diagnosed according to European Organization for Research and Treatment of Cancer/Invasive Fungal Infections Cooperative Group and the National Institute of Allergy and Infectious Diseases Mycoses Study Group (EORTC/MSG) consensus definitions (19 proven/probable cases and 42 controls). Clinical performance and clinical utility (time to positivity) were calculated for both kinds of samples. The sensitivity and specificity for Aspergillus PCR when testing serum were 68.4% and 76.2%, respectively, and for plasma, they were 94.7% and 83.3%, respectively. Eighty-five percent of serum and plasma PCR results were concordant. On average, plasma PCR was positive 16.8 days before diagnosis and was the earliest indicator of infection in 13 cases, combined with other biomarkers in five cases. On average, serum PCR was positive 10.8 days before diagnosis and was the earliest indicator of infection in six cases, combined with other biomarkers in three cases. These results confirm the analytical finding that the sensitivity of Aspergillus PCR using plasma is superior to that using serum. PCR positivity occurs earlier when testing plasma and provides sufficient sensitivity for the screening of invasive aspergillosis while maintaining methodological simplicity. Copyright © 2015 White et al.

Advances in ultrasonic testing of austenitic stainless steel welds. Towards a 3D description of the material including attenuation and optimisation by inversion

NASA Astrophysics Data System (ADS)

Moysan, J.; Gueudré, C.; Ploix, M.-A.; Corneloup, G.; Guy, Ph.; Guerjouma, R. El; Chassignole, B.

In the case of multi-pass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Anisotropy results from the metal solidification and is correlated with the grain orientation. A precise description of the material is one of the key points to obtain reliable results with wave propagation codes. A first advance is the model MINA which predicts the grain orientations in multi-pass 316-L steel welds. For flat position welding, good predictions of the grains orientations were obtained using 2D modelling. In case of welding in position the resulting grain structure may be 3D oriented. We indicate how the MINA model can be improved for 3D description. A second advance is a good quantification of the attenuation. Precise measurements are obtained using plane waves angular spectrum method together with the computation of the transmission coefficients for triclinic material. With these two first advances, the third one is now possible: developing an inverse method to obtain the material description through ultrasonic measurements at different positions.

Retrospective testing and case series study of porcine delta coronavirus in U.S. swine herds.

PubMed

McCluskey, Brian J; Haley, Charles; Rovira, Albert; Main, Rodger; Zhang, Yan; Barder, Sunny

2016-01-01

Porcine deltacoronavirus (PDCoV) was first reported in the United States (US) in February 2014. This was the second novel swine enteric coronavirus detected in the US since May 2013. In this study, we conducted retrospective testing of samples submitted to three veterinary diagnostic laboratories where qualifying biological samples were derived from previously submitted diagnostic case submissions from US commercial swine farms with a clinical history of enteric disease or from cases that had been previously tested for transmissible gastroenteritis virus, PEDV, or rotavirus. Overall, 2286 banked samples were tested from 27 States. Samples were collected in 3 separate years and in 17 different months. Test results revealed 4 positive samples, 3 collected in August 2013 and 1 collected in October 2013. In addition, a case series including 42 operations in 10 States was conducted through administration of a survey. Survey data collected included information on characteristics of swine operations that had experienced PDCoV clinical signs. Special emphasis was placed on obtaining descriptive estimates of biosecurity practices and disease status over time of each operation. Clinical signs of PDCoV were reported to be similar to those of PEDV. The average number of animals on each operation exhibiting clinical signs (morbidity) and the average number of case fatalities was greatest for suckling and weaned pigs. Average operation-level weaned pig morbidity was greatest in the first week of the outbreak while average operation-level suckling pig case fatality was greatest in the second week of the outbreak. The survey included questions regarding biosecurity practices for visitors and operation employees; trucks, equipment and drivers; and feed sources. These questions attempted to identify a likely pathway of introduction of PDCoV onto the operations surveyed. Published by Elsevier B.V.

Antioxidant enzymes levels in children with juvenile rheumatoid arthritis.

PubMed

Goţia, S; Popovici, I; Hermeziu, B

2001-01-01

Pathogenic mechanism of chronic inflammation is associated with increased production of superoxide anion and hydrogen peroxide. In the neutralization process of that anions, superoxid dismutase (SOD), catalase (CAT), and glutation peroxidase (GPx) are key enzymes. Aim of study consists of establishing of some clinic-biological correlations in JRA chronic inflammation in childhood between clinical status and determination of lipoperoxidation products and antioxidative enzymes in the blood. Blood samples were obtained from 20 patients admitted in 2nd Clinic of Pediatrics, 4-6 months after onset of disease, diagnosed with JRA, oligoarticular form (6 cases), poliarticular form (9 cases) and systemic form (5 cases), as compared to 10 control subjects. SOD, CAT, GPx were measured comparing with malonildialdehyde (MDA), seric glutation (GSH) and usual inflammatory tests (ESR, fibrinogen, CRP). Determinations were repeated after 6 weeks of treatment. In all our cases, level of antioxidant enzymes (CAT, GPx) was decreased at time of diagnosis, concomitant with increased MDA, SOD and inflammatory tests. In most of cases, after 6 weeks of correct anti-inflammatory treatment, levels of enzymatic antioxidant markers were still decreased, as compared to usual inflammatory tests that came back to normal. Persistent decreased antioxidant enzymatic activity was found in cases that need immunomodulatory activity (Methotrexat). Determination of antioxidant enzymes level can be considered an evolution marker in JRA. More studies are necessary to find if antioxidant potential of blood can be used as following marker for immunosuppressive therapy.

Case Report: Diagnosis of a Rare Plaque-Like Dermal Fibroma Successfully Treated With Mohs Surgery.

PubMed

Gill, Pavandeep; Arlette, John; Shiau, Carolyn J; Abi Daoud, Marie S

CD34-positive plaque-like dermal fibroma (PDF) is a poorly characterised benign dermal neoplasm that has a wide differential diagnosis. It can be mistaken for other entities on superficial biopsy and be overtreated, leading to unnecessary worry and extensive surgery. To report on an uncommon presentation of this entity, the histopathologic differential diagnosis of PDF, and a novel treatment method. Clinical and histopathological information was obtained for a PDF lesion on a 75-year-old man. On superficial biopsy, the PDF lesion was misinterpreted as a possible neurothekeoma. Successful Mohs surgery and genetic testing confirmed the diagnosis of PDF, and the patient received appropriate tissue-sparing surgical management. This case adds to our current knowledge about PDF and highlights the importance of early recognition of these lesions to direct appropriate diagnostic testing (full-thickness biopsy) and management. This case confirms successful management with Mohs surgery.

Clinical Assessment and Diagnostics of Patients With Hand Disorders: A Case Study Approach.

PubMed

Leow, Mabel Qi He; Lim, Rebecca Qian Ru; Tay, Shian Chao

Clinical assessment of the hand is important for diagnosing underlying hand disorders. Using a case study approach, the clinical assessment for three disorders of the hands is presented: trigger finger (stenosing tenosynovitis), carpal tunnel syndrome, and ulnar-sided wrist injury (styloid impingement). We assess the annular one pulley and finger range of motion for patients with trigger finger. To diagnose for carpal tunnel syndrome, assessment for Tinel's sign, Phalen's sign, abductor pollicis brevis muscle bulk, two-point discrimination, and obtaining a nerve conduction study are performed. Assessment for ulnar-sided wrist injury includes wrist range of motion, assessment of distal radial ulnar joint stability, provocation tests, grip strength, x-ray, and magnetic resonance imaging. This article begins with a description of the hand and wrist anatomy. For each case study, the clinical history is described, followed by a discussion of the pathophysiology, clinical assessments, and diagnostic tests.

Migration of mineral oil from party plates of recycled paperboard into foods: 1. Is recycled paperboard fit for the purpose? 2. Adequate testing procedure.

PubMed

Dima, Giovanna; Verzera, Antonella; Grob, Koni

2011-11-01

Party plates made of recycled paperboard with a polyolefin film on the food contact surface (more often polypropylene than polyethylene) were tested for migration of mineral oil into various foods applying reasonable worst case conditions. The worst case was identified as a slice of fried meat placed onto the plate while hot and allowed to cool for 1 h. As it caused the acceptable daily intake (ADI) specified by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) to be exceeded, it is concluded that recycled paperboard is generally acceptable for party plates only when separated from the food by a functional barrier. Migration data obtained with oil as simulant at 70°C was compared to the migration into foods. A contact time of 30 min was found to reasonably cover the worst case determined in food.

Preliminary tests on nisin and pediocin production using waste protein sources. Factorial and kinetic studies.

PubMed

Vázquez, J A; González, M P; Murado, M A

2006-03-01

Lactic acid bacteria, the object of current interest as bacteriocin producers, are microorganisms with complex requirements for peptidic sources, making them appropriate indicators for testing the suitability of formulations based on proteinaceous wastes for use as microbiological media. Different peptones obtained from visceral and fish muscle residues promoted growth of lactic acid bacteria when applied individually or in combination. Kinetic parameters and bacteriocin production were similar and, in some cases (pediocin), far superior (>500%) to those obtained with bactopeptones and commercial media specifically recommended for lactic acid bacteria growth. Visceral residues, especially when subjected to a brief process of autohydrolysis at 20 degrees C, were more efficient for bacterial growth than muscle, even when muscle was treated with pepsin.

Experimental Investigation of the Flow on a Simple Frigate Shape (SFS)

PubMed Central

Mora, Rafael Bardera

2014-01-01

Helicopters operations on board ships require special procedures introducing additional limitations known as ship helicopter operational limitations (SHOLs) which are a priority for all navies. This paper presents the main results obtained from the experimental investigation of a simple frigate shape (SFS) which is a typical case of study in experimental and computational aerodynamics. The results obtained in this investigation are used to make an assessment of the flow predicted by the SFS geometry in comparison with experimental data obtained testing a ship model (reduced scale) in the wind tunnel and on board (full scale) measurements performed on a real frigate type ship geometry. PMID:24523646

Effectiveness of rotavirus pentavalent vaccine under a universal immunization programme in Israel, 2011-2015: a case-control study.

PubMed

Muhsen, K; Anis, E; Rubinstein, U; Kassem, E; Goren, S; Shulman, L M; Ephros, M; Cohen, D

2018-01-01

The use of rotavirus pentavalent vaccine (RotaTeq ® ) as a sole vaccine within rotavirus universal immunization programmes remains limited. We examined the effectiveness of RotaTeq in preventing rotavirus gastroenteritis (RVGE) hospitalization in Israel, after the introduction of universal immunization against the disease. A test-negative case-control study included age-eligible children for universal RotaTeq immunization (aged 2-59 months, born in 2011-2015). Cases (n = 98) were patients who tested positive for rotavirus by immunochromatography; those who tested negative (n = 628) comprised the control group. Information on rotavirus immunization history was obtained through linkage with a national immunization registry. Vaccination status was compared between cases and controls, adjusted odds ratios (aORs) were obtained from logistic regression models, and vaccine effectiveness calculated as (1 - aOR)*100. Immunization with RotaTeq was less frequent in RVGE cases (73.5%) than in controls (90.1%), p < 0.001; this association persisted after controlling for potential confounders. Effectiveness of the complete vaccine series was estimated at 77% (95% confidence interval (CI): 49-90) in children aged 6-59 months, and 86% (95% CI: 65-94) in children aged 6-23 months; whereas for the incomplete series, the respective estimates were 72% (95% CI: 28-89) and 75% (95% CI: 30-91). Vaccine effectiveness was estimated at 79% (95% CI: 45-92) against G1P[8]-associated RVGE hospitalizations and 69% (95% CI: 11-89) against other genotype-RVGE hospitalizations. High effectiveness of RotaTeq as the sole rotavirus vaccine in a universal immunization programme was demonstrated in a high-income country. Although partial vaccination conferred protection, completing the vaccine series is warranted to maximize the benefit. Copyright © 2017 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Propeller Analysis Using RANS/BEM Coupling Accounting for Blade Blockage

DTIC Science & Technology

2015-07-04

described. Estimates of the importance of the blade blockage effect are obtained by analyzing the propeller of the well-known KRISO container ship (KCS...2 and 3 were applied to the KRISO Container Ship (KCS), a test case that has often been reported in the scientific literature, in particular the

High School Students' Understanding of Acid-Base Concepts: An Ongoing Challenge for Teachers

ERIC Educational Resources Information Center

Damanhuri, Muhd Ibrahim Muhamad; Treagust, David F.; Won, Mihye; Chandrasegaran, A. L.

2016-01-01

Using a quantitative case study design, the "Acids-Bases Chemistry Achievement Test" ("ABCAT") was developed to evaluate the extent to which students in Malaysian secondary schools achieved the intended curriculum on acid-base concepts. Responses were obtained from 260 Form 5 (Grade 11) students from five schools to initially…

Biochemistry and Molecular Biology Techniques for Person Characterization

ERIC Educational Resources Information Center

Herrero, Salvador; Ivorra, Jose Luis; Garcia-Sogo, Magdalena; Martinez-Cortina, Carmen

2008-01-01

Using the traditional serological tests and the most novel techniques for DNA fingerprinting, forensic scientists scan different traits that vary from person to person and use the data to include or exclude suspects based on matching with the evidence obtained in a criminal case. Although the forensic application of these methods is well known,…

Structure-based CoMFA as a predictive model - CYP2C9 inhibitors as a test case.

PubMed

Yasuo, Kazuya; Yamaotsu, Noriyuki; Gouda, Hiroaki; Tsujishita, Hideki; Hirono, Shuichi

2009-04-01

In this study, we tried to establish a general scheme to create a model that could predict the affinity of small compounds to their target proteins. This scheme consists of a search for ligand-binding sites on a protein, a generation of bound conformations (poses) of ligands in each of the sites by docking, identifications of the correct poses of each ligand by consensus scoring and MM-PBSA analysis, and a construction of a CoMFA model with the obtained poses to predict the affinity of the ligands. By using a crystal structure of CYP 2C9 and the twenty known CYP inhibitors as a test case, we obtained a CoMFA model with a good statistics, which suggested that the classification of the binding sites as well as the predicted bound poses of the ligands should be reasonable enough. The scheme described here would give a method to predict the affinity of small compounds with a reasonable accuracy, which is expected to heighten the value of computational chemistry in the drug design process.

Studying the Relation of Postprandial Triglyceride with Coronary Artery Disease (CAD).

PubMed

Manochehri, Mohammad; Moghadam, Adel Johari

2016-07-27

Coronary artery disease (CAD) is the most common cause of mortality worldwide and determination of contributing factors is essential. This study was conducted to study the relation of postprandial triglyceride as a risk of coronary artery disease in patients with proven CAD by angiography, referred to 502 Hospital of Army in 2015. This observational study conducted as a case-control and contained 80 male participants referred to 502 Hospital of Army. Half of these participants had proven CAD by angiography test and the other ones were healthy as a control group. Fasting serum triglyceride was evaluated in all participants and postprandial TG was checked 4 hours after a standard meal. Obtained data were analyzed by SPSS ver. 13. The results indicated that fasting TG and postprandial TG level were significantly higher in CAD patients (P-value=0.001). It was also shown evaluation of postprandial TG is more sensitive test than fasting TG in case of CAD patients. Our obtained results shown, evaluation of high level of postprandial TG is more reliable than fasting TG for patients whom suffer from CAD.

Inlet flow test calibration for a small axial compressor rig. Part 2: CFD compared with experimental results

NASA Technical Reports Server (NTRS)

Miller, D. P.; Prahst, P. S.

1995-01-01

An axial compressor test rig has been designed for the operation of small turbomachines. A flow test was run to calibrate and determine the source and magnitudes of the loss mechanisms in the compressor inlet for a highly loaded two-stage axial compressor test. Several flow conditions and inlet guide vane (IGV) angle settings were established, for which detailed surveys were completed. Boundary layer bleed was also provided along the casing of the inlet behind the support struts and ahead of the IGV. Several computational fluid dynamics (CFD) calculations were made for selected flow conditions established during the test. Good agreement between the CFD and test data were obtained for these test conditions.

A genetic study of autism in Costa Rica: multiple variables affecting IQ scores observed in a preliminary sample of autistic cases.

PubMed

McInnes, L Alison; González, Patricia Jiménez; Manghi, Elina R; Esquivel, Marcela; Monge, Silvia; Delgado, Marietha Fallas; Fournier, Eduardo; Bondy, Pamela; Castelle, Kathryn

2005-03-21

Autism is a heritable developmental disorder of communication and socialization that has not been well studied in Hispanic populations. Therefore, we are collecting and evaluating all possible cases of autism from a population isolate in the Central Valley of Costa Rica (CVCR) for a clinical and genetic study. We are assessing all subjects and parents, as appropriate, using the newly translated Spanish versions of the Autism Diagnostic Interview-Revised (ADI-R) and the Autism Diagnostic Observation Schedule (ADOS) as well as tests of intelligence and adaptive behavior. Detailed obstetric and family medical/psychiatric histories are taken. All cases are tested for Fragile X and will be extensively evaluated for cytogenetic abnormalities. To date we have obtained clinical evaluations on over 76 cases of possible autism referred to our study and report data for the initial 35 complete cases. The mean age of the probands is 6.7 years, and 31 of the 35 cases are male. Twenty-one of the cases have IQs <50 and only 6 cases have IQs > or = 70. Over half of the mothers had complications during pregnancy and/or delivery. No cases have tested positively for Fragile X or PKU. Chromosomal G-banding is not yet complete for all cases. Diagnostic data gathered on cases of autism in the CVCR using Spanish versions of the ADI-R and ADOS look similar to that generated by studies of English-speaking cases. However, only 17% of our cases have IQs within the normal range, compared to the figure of 25% seen in most studies. This result reflects an ascertainment bias in that only severe cases of autism come to treatment in the CVCR because there are no government-sponsored support programs or early intervention programs providing an incentive to diagnose autism. The severity of mental retardation seen in most of our cases may also be exaggerated by the lack of early intervention programs and the use of IQ tests without Costa Rican norms. Still, we must formally train healthcare providers and teachers to recognize and refer autistic cases with normal or near normal IQs that are not seen in treatment.

Allium-test as a tool for toxicity testing of environmental radioactive-chemical mixtures

NASA Astrophysics Data System (ADS)

Oudalova, A. A.; Geras'kin, S. A.; Dikareva, N. S.; Pyatkova, S. V.

2017-01-01

Bioassay-based approaches have been propagated to assess toxicity of unknown mixtures of environmental contaminants, but it was rarely applied in cases of chemicals with radionuclides combinations. Two Allium-test studies were performed to assess environmental impact from potential sources of combined radioactive-chemical pollution. Study sites were located at nuclear waste storage facilities in European and in Far-Eastern parts of Russia. As environmental media under impact, waters from monitor wells and nearby water bodies were tested. Concentrations of some chemicals and radionuclides in the samples collected enhanced the permitted limits. Cytogenetic and cytotoxic effects were used as biological endpoints, namely, frequency and spectrum of chromosome aberrations and mitotic abnormalities in anatelophase cells as well as mitotic activity in Allium root tips. Sample points were revealed where waters have an enhanced mutagenic potential. The findings obtained could be used to optimize monitoring system and advance decision making on management and rehabilitation of industrial sites. The Allium-test could be recommended and applied as an effective tool for toxicity testing in case of combined contamination of environmental compartments with radionuclides and chemical compounds.

Human brucellosis among pyrexia of unknown origin cases and occupationally exposed individuals in Goa Region, India.

PubMed

Pathak, Ajay D; Dubal, Zunjar B; Doijad, Swapnil; Raorane, Abhay; Rodrigues, Savio; Naik, Rajeshwar; Naik-Gaonkar, Shraddha; Kalorey, Dewanand R; Kurkure, Nitin V; Naik, Rajesh; Barbuddhe, Sukhadeo B

2014-01-01

Brucellosis is a widespread zoonotic infection. This disease is endemic in many parts of Asia, including India. Brucellosis is a major cause of pyrexia of unknown origin (PUO). Persons exposed to infected animals or contaminated animal products are at high risk. Seropositivity among animal handlers, veterinarians and dairy workers has been documented in India. Thus, the present study was aimed to determine prevalence of brucellosis among PUO cases and occupationally exposed individuals. In this study, serum samples (n=282) from cases of pyrexia of unknown origin (PUO) (n=243), and occupationally exposed individuals (n=39) were collected and tested for brucellosis by Rose Bengal plate test (RBPT), serum agglutination test (SAT), indirect ELISA, IgG and IgM ELISA. Blood culture for isolation of Brucella was performed for 10 serologically positive patients using BACTEC 9050 automated blood culture system. Biochemical tests and PCR techniques were used for confirmation of the isolates. Of the samples tested, 4.25%, 3.54%, 6.02% and 4.96% samples were positive by RBPT, SAT, indirect ELISA and IgG ELISA, respectively. None of the sample was positive for IgM ELISA. Of the 10 blood samples cultured bacteriologically, one Brucella isolate was recovered. The isolate was confirmed as Brucella abortus. Amplification of the bcsp31 and IS711 genes was also observed. Seropositivity for brucellosis was observed among PUO cases, animal handlers and dairy workers in Goa, India. The serological tests showed variable results. One Brucella isolate was obtained by performing blood culture. Confirmation of the case was done rapidly using molecular tools. General awareness about clinical symptoms should be increased which will improve proper diagnosis within short time frame.

Censored Hurdle Negative Binomial Regression (Case Study: Neonatorum Tetanus Case in Indonesia)

NASA Astrophysics Data System (ADS)

Yuli Rusdiana, Riza; Zain, Ismaini; Wulan Purnami, Santi

2017-06-01

Hurdle negative binomial model regression is a method that can be used for discreate dependent variable, excess zero and under- and overdispersion. It uses two parts approach. The first part estimates zero elements from dependent variable is zero hurdle model and the second part estimates not zero elements (non-negative integer) from dependent variable is called truncated negative binomial models. The discrete dependent variable in such cases is censored for some values. The type of censor that will be studied in this research is right censored. This study aims to obtain the parameter estimator hurdle negative binomial regression for right censored dependent variable. In the assessment of parameter estimation methods used Maximum Likelihood Estimator (MLE). Hurdle negative binomial model regression for right censored dependent variable is applied on the number of neonatorum tetanus cases in Indonesia. The type data is count data which contains zero values in some observations and other variety value. This study also aims to obtain the parameter estimator and test statistic censored hurdle negative binomial model. Based on the regression results, the factors that influence neonatorum tetanus case in Indonesia is the percentage of baby health care coverage and neonatal visits.

Teleradiology Via The Naval Remote Medical Diagnosis System (RMDS)

NASA Astrophysics Data System (ADS)

Rasmussen, Will; Stevens, Ilya; Gerber, F. H.; Kuhlman, Jayne A.

1982-01-01

Testing was conducted to obtain qualitative and quantitative (statistical) data on radiology performance using the Remote Medical Diagnosis System (RMDS) Advanced Development Models (ADMs)1. Based upon data collected during testing with professional radiologists, this analysis addresses the clinical utility of radiographic images transferred through six possible RMDS transmission modes. These radiographs were also viewed under closed-circuit television (CCTV) and lightbox conditions to provide a basis for comparison. The analysis indicates that the RMDS ADM terminals (with a system video resolution of 525 x 256 x 6) would provide satisfactory radiographic images for radiology consultations in emergency cases with gross pathological disorders. However, in cases involving more subtle findings, a system video resolution of 525 x 512 x 8 would be preferable.

Efficiency and measurements agreement between swept-source OCT and low-coherence interferometry biometry systems.

PubMed

Calvo-Sanz, Jorge A; Portero-Benito, Alejandro; Arias-Puente, Alfonso

2018-03-01

To compare and evaluate the agreement between the measurements obtained with a swept-source optical coherence tomography (OCT)-based biometer, the IOLMaster® 700 (IOLM), and those obtained by an optical biometer based on optical low-coherence interferometry (OLCI), the Aladdin (ALD); To evaluate the ability to perform biometric measurements in those eyes with transparency alterations. Fifty-five eyes of 55 subjects were included in this study. Axial length (AL), corneal power (K, in diopters) and its astigmatism, anterior chamber depth (ACD), central corneal thickness (CCT), and lens thickness (LT) measures were obtained within both biometers, Zeiss IOLMaster 700 and Topcon Aladdin. Results were analyzed and compared using the Student's paired samples t-test, Bland-Altman analysis and intraclass correlation coefficient (ICC). Mean age was 73.12 ± 2.63 (62-89 years). The IOLM mean AL, K, and LT values did not show a statistically significant difference from ALD values and showed excellent agreement and correlation (ICC = 1.000, 0.970, 0.952). IOLM measured a lower mean ACD (-0.036 mm) and higher CCT measurements (9.296 μm). Those results were statistically different (p < 0.001 in both cases) but showed an excellent correlation coefficients (ICC = 0.994, 0.938). IOLM was able to obtain measures from all the eyes examined, while ALD did not measure in two cases with dense nuclear cataract. ALD showed spherical K measures in 7.27% of cases. Overall a quite good agreement between IOLM and ALD was found. ALD showed spherical keratometry measures in 7.27% of cases. IOLMaster 700 was more effective in obtaining AL measurements in eyes with dense cataracts.

Dobrava Virus Carried by the Yellow-Necked Field Mouse Apodemus flavicollis, Causing Hemorrhagic Fever with Renal Syndrome in Romania

PubMed Central

Panculescu-Gatej, Raluca Ioana; Sirbu, Anca; Dinu, Sorin; Waldstrom, Maria; Heyman, Paul; Murariu, Dimitru; Petrescu, Angela; Szmal, Camelia; Oprisan, Gabriela; Lundkvist, Åke

2014-01-01

Abstract Hemorrhagic fever with renal syndrome (HFRS) has been confirmed by serological methods during recent years in Romania. In the present study, focus-reduction neutralization tests (FRNT) confirmed Dobrava hantavirus (DOBV) as the causative agent in some HFRS cases, but could not distinguish between DOBV and Saaremaa virus (SAAV) infections in other cases. DOBV was detected by a DOBV-specific TaqMan assay in sera of nine patients out of 22 tested. Partial sequences of the M genomic segment of DOBV were obtained from sera of three patients and revealed the circulation of two DOBV lineages in Romania. Investigation of rodents trapped in Romania found three DOBV-positive Apodemus flavicollis out of 83 rodents tested. Two different DOBV lineages were also detected in A. flavicollis as determined from partial sequences of the M and S genomic segments. Sequences of DOBV in A. flavicollis were either identical or closely related to the sequences obtained from the HFRS patients. The DOBV strains circulating in Romania clustered in two monophyletic groups, together with strains from Slovenia and the north of Greece. This is the first evidence for the circulation of DOBV in wild rodents and for a DOBV etiology of HFRS in Romania. PMID:24746107

Dobrava virus carried by the yellow-necked field mouse Apodemus flavicollis, causing hemorrhagic fever with renal syndrome in Romania.

PubMed

Panculescu-Gatej, Raluca Ioana; Sirbu, Anca; Dinu, Sorin; Waldstrom, Maria; Heyman, Paul; Murariu, Dimitru; Petrescu, Angela; Szmal, Camelia; Oprisan, Gabriela; Lundkvist, Ake; Ceianu, Cornelia S

2014-05-01

Hemorrhagic fever with renal syndrome (HFRS) has been confirmed by serological methods during recent years in Romania. In the present study, focus-reduction neutralization tests (FRNT) confirmed Dobrava hantavirus (DOBV) as the causative agent in some HFRS cases, but could not distinguish between DOBV and Saaremaa virus (SAAV) infections in other cases. DOBV was detected by a DOBV-specific TaqMan assay in sera of nine patients out of 22 tested. Partial sequences of the M genomic segment of DOBV were obtained from sera of three patients and revealed the circulation of two DOBV lineages in Romania. Investigation of rodents trapped in Romania found three DOBV-positive Apodemus flavicollis out of 83 rodents tested. Two different DOBV lineages were also detected in A. flavicollis as determined from partial sequences of the M and S genomic segments. Sequences of DOBV in A. flavicollis were either identical or closely related to the sequences obtained from the HFRS patients. The DOBV strains circulating in Romania clustered in two monophyletic groups, together with strains from Slovenia and the north of Greece. This is the first evidence for the circulation of DOBV in wild rodents and for a DOBV etiology of HFRS in Romania.

Developmental validation of an X-Insertion/Deletion polymorphism panel and application in HAN population of China.

PubMed

Zhang, Suhua; Sun, Kuan; Bian, Yingnan; Zhao, Qi; Wang, Zheng; Ji, Chaoneng; Li, Chengtao

2015-12-14

InDels are short-length polymorphisms characterized by low mutation rates, high inter-population diversity, short amplicon strategy and simplicity of laboratory analysis. This work describes the developmental validation of an X-InDels panel amplifying 18 bi-allelic markers and Amelogenin in one single PCR system. Developmental validation indicated that this novel panel was reproducible, accurate, sensitive and robust for forensic application. Sensitivity testing of the panel was such that a full profile was obtainable even with 125 pg of human DNA with intra-locus balance above 70%. Specificity testing was demonstrated by the lack of cross-reactivity with a variety of commonly encountered animal species and microorganisms. For the stability testing in cases of PCR inhibition, full profiles have been obtained with hematin (≤1000 μM) and humic acid (≤150 ng/μL). For the forensic investigation of the 18 X-InDels in the HAN population of China, no locus deviated from the Hardy-Weinberg equilibrium and linkage disequilibrium. Since they are independent from each other, the CDPfemale was 0.999999726 and CDPmale was 0.999934223. The forensic parameters suggested that this X-Indel panel is polymorphic and informative, which provides valuable X-linked information for deficient relationship cases where autosomal markers are uninformative.

Developmental validation of an X-Insertion/Deletion polymorphism panel and application in HAN population of China

PubMed Central

Zhang, Suhua; Sun, Kuan; Bian, Yingnan; Zhao, Qi; Wang, Zheng; Ji, Chaoneng; Li, Chengtao

2015-01-01

InDels are short-length polymorphisms characterized by low mutation rates, high inter-population diversity, short amplicon strategy and simplicity of laboratory analysis. This work describes the developmental validation of an X-InDels panel amplifying 18 bi-allelic markers and Amelogenin in one single PCR system. Developmental validation indicated that this novel panel was reproducible, accurate, sensitive and robust for forensic application. Sensitivity testing of the panel was such that a full profile was obtainable even with 125 pg of human DNA with intra-locus balance above 70%. Specificity testing was demonstrated by the lack of cross-reactivity with a variety of commonly encountered animal species and microorganisms. For the stability testing in cases of PCR inhibition, full profiles have been obtained with hematin (≤1000 μM) and humic acid (≤150 ng/μL). For the forensic investigation of the 18 X-InDels in the HAN population of China, no locus deviated from the Hardy–Weinberg equilibrium and linkage disequilibrium. Since they are independent from each other, the CDPfemale was 0.999999726 and CDPmale was 0.999934223. The forensic parameters suggested that this X-Indel panel is polymorphic and informative, which provides valuable X-linked information for deficient relationship cases where autosomal markers are uninformative. PMID:26655948

Development of flexible rotor balancing criteria

NASA Technical Reports Server (NTRS)

Walter, W. W.; Rieger, N. F.

1979-01-01

Several studies in which analytical procedures were used to obtain balancing criteria for flexible rotors are described. General response data for a uniform rotor in damped flexible supports were first obtained for plain cylindrical bearings, tilting pad bearings, axial groove bearings, and partial arc bearings. These data formed the basis for the flexible rotor balance criteria presented. A procedure by which a practical rotor in bearings could be reduced to an equivalent uniform rotor was developed and tested. It was found that the equivalent rotor response always exceeded to practical rotor response by more than sixty percent for the cases tested. The equivalent rotor procedure was then tested against six practical rotor configurations for which data was available. It was found that the equivalent rotor method offered a procedure by which balance criteria could be selected for practical flexible rotors, using the charts given for the uniform rotor.

Interacting Winds in Eclipsing Symbiotic Systems - The Case Study of EG Andromedae

NASA Astrophysics Data System (ADS)

Calabrò, Emanuele

2014-03-01

We report the mathematical representation of the so called eccentric eclipse model, whose numerical solutions can be used to obtain the physical parameters of a quiescent eclipsing symbiotic system. Indeed the nebular region produced by the collision of the stellar winds should be shifted to the orbital axis because of the orbital motion of the system. This mechanism is not negligible, and it led us to modify the classical concept of an eclipse. The orbital elements obtained from spectroscopy and photometry of the symbiotic EG Andromedae were used to test the eccentric eclipse model. Consistent values for the unknown orbital elements of this symbiotic were obtained. The physical parameters are in agreement with those obtained by means of other simulations for this system.

Recurrent stingers in an adolescent American football player: dilemmas of return to play. A case report and review of the literature.

PubMed

Zaremski, Jason L; Horodyski, MaryBeth; Herman, Daniel C

2017-01-01

We present the case of a 16-year-old football linebacker with a history of recurrent stingers. Initial physical examination was normal as were cervical spine radiographs. MRI of the cervical spine revealed relative stenosis. Electrodiagnostic testing revealed chronic bilateral neurogenic changes of the superior trunk of the brachial plexus. A Kerr Collar was obtained to minimize head acceleration and force transmission through the neck. While there are return-to-play guidelines for recurrent stingers, there are inconsistencies with those recommendations. Our case highlights the challenges in contact sport athletes with recurrent stingers.

Pre-examination factors affecting molecular diagnostic test results and interpretation: A case-based approach.

PubMed

Payne, Deborah A; Baluchova, Katarina; Peoc'h, Katell H; van Schaik, Ron H N; Chan, K C Allen; Maekawa, Masato; Mamotte, Cyril; Russomando, Graciela; Rousseau, François; Ahmad-Nejad, Parviz

2017-04-01

Multiple organizations produce guidance documents that provide opportunities to harmonize quality practices for diagnostic testing. The International Organization for Standardization ISO 15189 standard addresses requirements for quality in management and technical aspects of the clinical laboratory. One technical aspect addresses the complexities of the pre-examination phase prior to diagnostic testing. The Committee for Molecular Diagnostics of the International Federation for Clinical Chemistry and Laboratory Medicine (also known as, IFCC C-MD) conducted a survey of international molecular laboratories and determined ISO 15189 to be the most referenced guidance document. In this review, the IFCC C-MD provides case-based examples illustrating the value of select pre-examination processes as these processes relate to molecular diagnostic testing. Case-based examples in infectious disease, oncology, inherited disease and pharmacogenomics address the utility of: 1) providing information to patients and users, 2) designing requisition forms, 3) obtaining informed consent and 4) maintaining sample integrity prior to testing. The pre-examination phase requires extensive and consistent communication between the laboratory, the healthcare provider and the end user. The clinical vignettes presented in this paper illustrate the value of applying select ISO 15189 recommendations for general laboratory to the more specialized area of Molecular Diagnostics. Copyright © 2016 Elsevier B.V. All rights reserved.

A 31-year-old man with bilateral blurry vision and floaters.

PubMed

Abazari, Azin; Kaplowitz, Kevin; Sibony, Patrick

2015-01-01

We report a case of bilateral multifocal retinochoroiditis and bilateral optic disc edema in a patient with cat-scratch disease from Bartonella henselae. The patient initially had negative serologic testing. Repeat testing showed a markedly increased IgG and IgM convalescent titer and the development of a branch retinal artery and vein occlusion. In patients for whom there is a high clinical suspicion of cat-scratch disease, a convalescent titer should be obtained 2-3 weeks following a negative initial result.

Mitragynine (Kratom) - monitoring in sports drug testing.

PubMed

Guddat, Sven; Görgens, Christian; Steinhart, Vanessa; Schänzer, Wilhelm; Thevis, Mario

2016-11-01

In 2014, mitragynine (Kratom) was placed on the Monitoring List of the World Anti-Doping Agency to gain information of its current use in professional sports. Therefore, analytical strategies in sports drug testing are presented and the first Kratom case in professional sports is described. It is outlined that thorough monitoring by anti-doping laboratories is of utmost importance to obtain data on Kratom's misuse and to protect athletes from potential health hazards. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Comparison of NACA 0012 Laminar Flow Solutions: Structured and Unstructured Grid Methods

NASA Technical Reports Server (NTRS)

Swanson, R. C.; Langer, S.

2016-01-01

In this paper we consider the solution of the compressible Navier-Stokes equations for a class of laminar airfoil flows. The principal objective of this paper is to demonstrate that members of this class of laminar flows have steady-state solutions. These laminar airfoil flow cases are often used to evaluate accuracy, stability and convergence of numerical solution algorithms for the Navier-Stokes equations. In recent years, such flows have also been used as test cases for high-order numerical schemes. While generally consistent steady-state solutions have been obtained for these flows using higher order schemes, a number of results have been published with various solutions, including unsteady ones. We demonstrate with two different numerical methods and a range of meshes with a maximum density that exceeds 8 × 106 grid points that steady-state solutions are obtained. Furthermore, numerical evidence is presented that even when solving the equations with an unsteady algorithm, one obtains steady-state solutions.

[Clinical and magnetic resonance imaging characteristics of isolated congenital anosmia].

PubMed

Liu, Jian-feng; Wang, Jian; You, Hui; Ni, Dao-feng; Yang, Da-zhang

2010-05-25

To report a series of patients with isolated congenital anosmia and summarize their clinical and magnetic resonance imaging (MRI) characteristics. Twenty patients with isolated congenital anosmia were reviewed retrospectively. A thorough medical and chemosensory history, physical examination, nasal endoscopy, T&T olfactory testing, olfactory event-related potentials, sinonasal computed tomography scan and magnetic resonance image of olfactory pathway were performed in all patients. Neither ENT physical examination nor nasal endoscopy was remarkable. Subjective olfactory testing indicated all of them were of anosmia. No olfactory event-related potentials to maximal stimulus were obtained. Computed tomography scan was normal. MRI revealed the absence of olfactory bulbs and tracts in all cases. And hypoplasia or aplasia of olfactory sulcus was found in all cases. All the patients had normal sex hormone level. The diagnosis of isolated congenital anosmia is established on chief complaints, physical examination, olfactory testing and olfactory imaging. MRI of olfactory pathway is indispensable.

New endemic foci of tick-borne encephalitis (TBE) identified in districts where testing for TBE was not available before 2009 in Poland

PubMed Central

2013-01-01

Background Tick-borne encephalitis (TBE) is found in limited endemic foci in Poland. Lack of diagnosis limits disease detection in non-endemic provinces. Methods In 2009, we enhanced TBE surveillance to confirm the location of endemic foci and inform vaccination policy. In 105 hospitals located in 11/16 provinces, we identified suspected TBE cases through admission ICD-10 codes indicating aseptic meningo-encephalitis or from specimens tested for TBE. The National Reference Laboratory confirmed cases at no cost, by testing serum and/or cerebrospinal fluid using ELISA method. We calculated TBE reported rates as the number of confirmed TBE cases per 100,000 inhabitants. Adjusting to neighbouring districts, we classified districts as non-endemic (<0.1 cases per 100,000 inhabitants), low endemic (> = 0.1 to <1), moderately endemic (> = 1 to <5) and highly endemic (> = 5). We compared surveillance data obtained in 2009 with 2004–2008 baseline data. Results Among 166,099 admissions, we identified 1,585 suspected TBE cases of which 256 were confirmed. Physicians reported more suspected cases among patients <40 years old (12 cases per 1,000 admissions) than among older patients (8 cases per 1,000 admissions). However, patients <40 years of age were confirmed less frequently (16%), than older patients (35%). Physicians reported more suspected cases in districts classed as endemic during 2004–2008 (12 cases per 1,000 admissions, 77% tested for TBE) than in districts classed as non-endemic (7 cases per 1,000 admissions, 59% tested). Of the 38 newly identified endemic districts, 31 were adjacent to 2004–2008 endemic districts and 7 were isolated. Conclusions Enhanced surveillance detected 38 new endemic districts to be considered for TBE vaccination. However, lack of consistent testing in districts believed to be TBE-free remained an obstacle for mapping TBE risk. Although the disease affects mostly older adults and the elderly, more attention is given to the diagnosis of TBE in young patients. Solutions need to be identified to sustain sensitive, acceptable and affordable TBE surveillance in all districts of Poland. Also, higher attention should be given to the diagnosis of TBE in the elderly. PMID:23777675

Allergic reaction to mint leads to asthma

PubMed Central

Barnett, Tisha

2011-01-01

Respiratory and cutaneous adverse reactions to mint can result from several different mechanisms including IgE-mediated hypersensitivity, delayed-type hypersensitivity (contact dermatitis), and nonimmunologic histamine release. Reactions to cross-reacting plants of the Labiatae family, such as oregano and thyme, as well as to the chemical turpentine, may clue the clinician in on the diagnosis of mint allergy. Contact dermatitis can result from menthol in peppermint. Contact allergens have been reported in toothpastes, which often are mint-flavored. Allergic asthma from mint is less well-recognized. A case of a 54-year-old woman with dyspnea on exposure to the scent of peppermint is presented in whom mint exposure, as seemingly innocuous as the breath of others who had consumed Tic Tac candies, exacerbated her underlying asthma. This case highlights the importance of testing with multiple alternative measures of specific IgE to mint, including skin testing with mint extract, and skin testing with fresh mint leaves. Additionally, this cases suggests that asthma can result from inhaling the scent of mint and gives consideration to obtaining confirmatory pre- and postexposure pulmonary function data by both impulse oscillometry and spirometry. PMID:22852115

Parallelization of elliptic solver for solving 1D Boussinesq model

NASA Astrophysics Data System (ADS)

Tarwidi, D.; Adytia, D.

2018-03-01

In this paper, a parallel implementation of an elliptic solver in solving 1D Boussinesq model is presented. Numerical solution of Boussinesq model is obtained by implementing a staggered grid scheme to continuity, momentum, and elliptic equation of Boussinesq model. Tridiagonal system emerging from numerical scheme of elliptic equation is solved by cyclic reduction algorithm. The parallel implementation of cyclic reduction is executed on multicore processors with shared memory architectures using OpenMP. To measure the performance of parallel program, large number of grids is varied from 28 to 214. Two test cases of numerical experiment, i.e. propagation of solitary and standing wave, are proposed to evaluate the parallel program. The numerical results are verified with analytical solution of solitary and standing wave. The best speedup of solitary and standing wave test cases is about 2.07 with 214 of grids and 1.86 with 213 of grids, respectively, which are executed by using 8 threads. Moreover, the best efficiency of parallel program is 76.2% and 73.5% for solitary and standing wave test cases, respectively.

Effectiveness of back-to-back testing

NASA Technical Reports Server (NTRS)

Vouk, Mladen A.; Mcallister, David F.; Eckhardt, David E.; Caglayan, Alper; Kelly, John P. J.

1987-01-01

Three models of back-to-back testing processes are described. Two models treat the case where there is no intercomponent failure dependence. The third model describes the more realistic case where there is correlation among the failure probabilities of the functionally equivalent components. The theory indicates that back-to-back testing can, under the right conditions, provide a considerable gain in software reliability. The models are used to analyze the data obtained in a fault-tolerant software experiment. It is shown that the expected gain is indeed achieved, and exceeded, provided the intercomponent failure dependence is sufficiently small. However, even with the relatively high correlation the use of several functionally equivalent components coupled with back-to-back testing may provide a considerable reliability gain. Implications of this finding are that the multiversion software development is a feasible and cost effective approach to providing highly reliable software components intended for fault-tolerant software systems, on condition that special attention is directed at early detection and elimination of correlated faults.

Real-Time Sensor Validation, Signal Reconstruction, and Feature Detection for an RLV Propulsion Testbed

NASA Technical Reports Server (NTRS)

Jankovsky, Amy L.; Fulton, Christopher E.; Binder, Michael P.; Maul, William A., III; Meyer, Claudia M.

1998-01-01

A real-time system for validating sensor health has been developed in support of the reusable launch vehicle program. This system was designed for use in a propulsion testbed as part of an overall effort to improve the safety, diagnostic capability, and cost of operation of the testbed. The sensor validation system was designed and developed at the NASA Lewis Research Center and integrated into a propulsion checkout and control system as part of an industry-NASA partnership, led by Rockwell International for the Marshall Space Flight Center. The system includes modules for sensor validation, signal reconstruction, and feature detection and was designed to maximize portability to other applications. Review of test data from initial integration testing verified real-time operation and showed the system to perform correctly on both hard and soft sensor failure test cases. This paper discusses the design of the sensor validation and supporting modules developed at LeRC and reviews results obtained from initial test cases.

Long-term in vitro reactivity for HLA antibodies and comparison of detection using serum vs. plasma

PubMed Central

Norris, Philip J.; Lee, Jar-How; Carrick, Danielle M.; Gottschall, Jerome L.; Lebedeva, Mila; de Castro, B.R.; Kleinman, Steven H.; Busch, Michael P.

2010-01-01

BACKGROUND HLA antibodies are a possible cause of transfusion-related acute lung injury (TRALI), and fluorescent bead assays are often used for antibody detection. Serum is the manufacturer’s recommended sample, but plasma may be easier to obtain for studies of HLA antibody prevalence and TRALI case investigations. STUDY DESIGN AND METHODS Specimens were obtained from 44 multiparous females positive for HLA antibodies by lymphocytotoxicity testing at least 13 years prior, and from 1,000 contemporary blood donors. Screening tests were performed using a Luminex-based assay. In addition to comparing results obtained with paired plasma and serum samples, the effects of storage at 4 °C for one week and of multiple freeze-thaw cycles were evaluated. RESULTS Of 42 evaluable subjects with HLA antibodies documented >13 years earlier, only 1 showed loss of detectable antibodies, with 39 (93%) positive in the screening assay for class I and 24 (57%) positive in the screening assay for HLA class II antibodies. In 968 evaluable contemporary donors, 291 screened positive for HLA class I and 206 for HLA class II antibodies using a low assay cut-off. Screening test concordance using paired plasma and serum samples was high, particularly for subjects with higher level antibodies. Refrigeration of samples for one week did not significantly affect assay results, while repeated freeze-thaw cycles caused a decrement in signal level. CONCLUSION Serum and plasma samples gave concordant results in the majority of cases, particularly for specimens with higher-level antibodies. High-level HLA antibodies were present in most individuals for over 13 years. PMID:18980615

A model for treating voice disorders in school-age children within a video gaming environment.

PubMed

King, Suzanne N; Davis, Larry; Lehman, Jeffrey J; Ruddy, Bari Hoffman

2012-09-01

Clinicians use a variety of approaches to motivate children with hyperfunctional voice disorders to comply with voice therapy in a therapeutic session and improve the motivation of children to practice home-based exercises. Utilization of current entertainment technology in such approaches may improve participation and motivation in voice therapy. The purpose of this study is to test the feasibility of using an entertainment video game as a therapy device. Prospective cohort and case-control study. Three levels of game testing were conducted to an existing entertainment video game for use as a voice therapy protocol. The game was tested by two computer programmers and five normal participants. The third level of testing was a case study with a child diagnosed with a hyperfunctional voice disorder. Modifications to the game were made after each feasibility test. Errors with the video game performance were modified, including the addition of a time stamp directory and game controller. Resonance voice exercises were modified to accommodate the gaming environment and unique competitive situation, including speech rate, acoustic parameters, game speed, and point allocations. The development of video games for voice therapeutic purposes attempt to replicate the high levels of engagement and motivation attained with entertainment video games, stimulating a more productive means of learning while doing. This case study found that a purely entertainment video game can be implemented as a voice therapeutic protocol based on information obtained from the case study. Copyright © 2012 The Voice Foundation. All rights reserved.

Testing geopressured geothermal reservoirs in existing wells: Pauline Kraft Well No. 1, Nueces County, Texas. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

The Pauline Kraft Well No. 1 was originally drilled to a depth of 13,001 feet and abandoned as a dry hole. The well was re-entered in an effort to obtain a source of GEO/sup 2/ energy for a proposed gasohol manufacturing plant. The well was tested through a 5-inch by 2-3/8 inch annulus. The geological section tested was the Frio-Anderson sand of Mid-Oligocene age. The interval tested was from 12,750 to 12,860 feet. A saltwater disposal well was drilled on the site and completed in a Micocene sand section. The disposal interval was perforated from 4710 to 4770 feet andmore » from 4500 to 4542 feet. The test well failed to produce water at substantial rates. Initial production was 34 BWPD. A large acid stimulation treatment increased productivity to 132 BWPD, which was still far from an acceptable rate. During the acid treatment, a failure of the 5-inch production casing occurred. The poor production rates are attributed to a reservoir with very low permeability and possible formation damage. The casing failure is related to increased tensile strain resulting from cooling of the casing by acid and from the high surface injection pressure. The location of the casing failure is now known at this time, but it is not at the surface. Failure as a result of a defect in a crossover joint at 723 feet is suspected.« less

Modest rise in chlamydia and gonorrhoea testing did not increase case detection in a clinical HIV cohort in Ontario, Canada

PubMed Central

Burchell, Ann N; Grewal, Ramandip; Allen, Vanessa G; Gardner, Sandra L; Moravan, Veronika; Bayoumi, Ahmed M; Kaul, Rupert; McGee, Frank; Millson, Margaret (Peggy) E; Remis, Robert S; Raboud, Janet; Mazzulli, Tony; Rourke, Sean B

2014-01-01

Objectives We described patterns of testing for chlamydia and gonorrhoea infection among persons in specialty HIV care in Ontario, Canada, from 2008 to 2011. Methods We analysed data from 3165 participants in the OHTN Cohort Study attending one of seven specialty HIV care clinics. We obtained chlamydia and gonorrhoea test results via record linkage with the provincial public health laboratory. We estimated the proportion of participants who underwent testing annually, the positivity rate among those tested and the proportion diagnosed with chlamydia or gonorrhoea among all under observation. We explored risk factors for testing and diagnosis using multiple logistic regression analysis. Results The proportion tested annually rose from 15.2% (95% CI 13.6% to 16.7%) in 2008 to 27.0% (95% CI 25.3% to 28.6%) in 2011 (p<0.0001). Virtually all were urine-based nucleic acid amplification tests. Testing was more common among men who have sex with men (MSM), younger adults, Toronto residents, persons attending primary care clinics and persons who had tested in the previous year or who had more clinic visits in the current year. We observed a decrease in test positivity rates over time. However, the annual proportion diagnosed remained stable and in 2011 this was 0.97% (95% CI 0.61% to 1.3%) and 0.79% (95% CI 0.46% to 1.1%) for chlamydia and gonorrhoea, respectively. Virtually all cases were among MSM. Conclusions Chlamydia and gonorrhoea testing increased over time while test positivity rates declined and the overall proportion diagnosed remained stable, suggesting that the modest increase in testing did not improve case detection. PMID:25178285

A STUDY OF PNEUMOCOCCI AND ALLIED ORGANISMS IN HUMAN MOUTHS AND LUNGS AFTER DEATH

PubMed Central

Norris, Charles; Pappenheimer, Alwin M.

1905-01-01

The following conclusions may be drawn, based upon the result of our researches: 1. Organisms of the pneumococcus or streptococcus group are present in the lungs of practically all cases, whether normal or showing a variety of lesions; strictly speaking, they were found by us in forty out of forty-two cases, or in 95% of our series. 2. The pneumococci and the streptococci were obtained in practically similar percentages—that is, in 50 % of the cases. 3. Pneumococci were not obtained more frequently in the small series of patients exposed for some time to hospital atmosphere; our tables show the contrary to obtain. The number of cases examined were, however, insufficient, and the findings may thus be accidental, and hence of no value. 4. Test micro-organisms, namely, small portions—half a drachm or less—of B. prodigiosus, introduced into the human mouth after death, were conveyed to and recovered from the lungs by culture in a little over half of the cases in which this experiment was tried. The test micro-organisms are, we believe, conveyed to the lungs with the fluid which collects in mouths of persons after death, and which in many cases collects just before death. The numerous manipulations entailed in the removal of the body from the wards to the morgue greatly facilitate the entrance of any fluid from the pharynx and buccal cavity into the lungs. It follows logically, from the results obtained in this experiment, that the cultural findings after death are no guide to the bacterial contents of the lungs during life, and that any deductions made from such findings are unreliable and deceptive. Granted that our explanation be correct, there is every reason to believe that any of the micro-organisms present in the mouths and pharynx and in many cases in the stomach contents may enter the lungs and, if the conditions be suitable, increase in numbers, during the time between death and the examination of the lungs. There exists, perhaps, more frequently than has hitherto been suspected, a series of diplococci, intermediate between the typical pneumococci and streptococci. The diplococci of this type have been found in forty (40) per cent. of our cases. The differential diagnosis of these atypical diplococci from the pneumococci and streptococci is a difficult one, depending, as it does, upon general cultural characteristics. No single character, such as the presence of capsules or the fermentation of inulin, virulence, etc., has been found to be a certain criterion. The few agglutinative reactions we have made seem to show that these intermediate diplococci, those of Groups II, III, and IV, have no or only slight agglutinative affinities to the typical pneumococcus. Further tests must, however, be made with the various methods at our disposal before this statement can be accepted as final. These diplococci are of interest from the fact that they have been found in the blood during life, and in the pial exudate of cases of meningitis, endocarditis, etc. 6. Our studies have thrown no light whatever upon the conditions which determine the onset of lobar pneumonia in apparently healthy persons. Moreover, we have been unable to draw conclusions as to the presence of pneumococci in the lungs during life, or as to the channels by which they gain access thereto. PMID:19867010

Clinical and Genetic Diagnosis of Nonischemic Sudden Cardiac Death.

PubMed

Jiménez-Jáimez, Juan; Alcalde Martínez, Vicente; Jiménez Fernández, Miriam; Bermúdez Jiménez, Francisco; Rodríguez Vázquez Del Rey, María Del Mar; Perin, Francesca; Oyonarte Ramírez, José Manuel; López Fernández, Silvia; de la Torre, Inmaculada; García Orta, Rocío; González Molina, Mercedes; Cabrerizo, Elisa María; Álvarez Abril, Beatriz; Álvarez, Miguel; Macías Ruiz, Rosa; Correa, Concepción; Tercedor, Luis

2017-10-01

Nonischemic sudden cardiac death (SCD) is predominantly caused by cardiomyopathies and channelopathies. There are many diagnostic tests, including some complex techniques. Our aim was to analyze the diagnostic yield of a systematic diagnostic protocol in a specialized unit. The study included 56 families with at least 1 index case of SCD (resuscitated or not). Survivors were studied with electrocardiogram, advanced cardiac imaging, exercise testing, familial study, genetic testing and, in some cases, pharmacological testing. Families with deceased probands were studied using the postmortem findings, familial evaluation, and molecular autopsy with next-generation sequencing (NGS). A positive diagnosis was obtained in 80.4% of the cases, with no differences between survivors and nonsurvivors (P=.53). Cardiac channelopathies were more prevalent among survivors than nonsurvivors (66.6% vs 40%, P=.03). Among the 30 deceased probands, the definitive diagnosis was given by autopsy in 7. A diagnosis of cardiomyopathy tended to be associated with a higher event rate in the family. Genetic testing with NGS was performed in 42 index cases, with a positive result in 28 (66.6%), with no differences between survivors and nonsurvivors (P=.21). There is a strong likelihood of reaching a diagnosis in SCD after a rigorous protocol, with a more prevalent diagnosis of channelopathy among survivors and a worse familial prognosis in cardiomyopathies. Genetic testing with NGS is useful and its value is increasing with respect to the Sanger method. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

Genetic testing and counseling of a recipient after bone marrow transplant from a sibling harboring a germline BRCA1 pathogenic mutation.

PubMed

Škerl, Petra; Krajc, Mateja; Blatnik, Ana; Novaković, Srdjan

2017-07-01

Allogenic bone marrow transplant recipients represent a unique challenge, when they are referred for genetic testing and counseling. When performing genetic testing, it is extremely important to ensure that the detected DNA mutations originate from the patients own DNA, and therefore the most appropriate and reliable biological sample for DNA isolation must be obtained. The aim of the present study was to present the germline testing and counseling approach utilized in a rare case of a chimeric woman who received an allogenic bone marrow transplant from a sibling with a germline BRCA1 pathogenic mutation. According to our results, hairs with follicles are a reliable and ready source of DNA in a patient whose blood is of allogenic bone marrow transplant donor origin. Compared with a fibroblast culture, which is more difficult to obtain, the hair follicles are much more accessible and hair sampling is less invasive for the patient. Genetic testing based on the other sources of DNA, such as buccal swabs, is questionable due to the known risk of donor DNA contamination.

Geometric approach to nuclear pasta phases

NASA Astrophysics Data System (ADS)

Kubis, Sebastian; Wójcik, Włodzimierz

2016-12-01

By use of the variational methods and differential geometry in the framework of the liquid drop model we formulate appropriate equilibrium equations for pasta phases with imposed periodicity. The extension of the Young-Laplace equation in the case of charged fluid is obtained. The β equilibrium and virial theorem are also generalized. All equations are shown in gauge invariant form. For the first time, the pasta shape stability analysis is carried out. The proper stability condition in the form of the generalized Jacobi equation is derived. The presented formalism is tested on some particular cases.

A Nested Analysis for Data Collected from Groups: Making Crowding Research More Efficient

ERIC Educational Resources Information Center

Schiffenbauer, Allen; And Others

1978-01-01

This paper examines the difference between dependent and independent responses and suggest that, for the case of independence, a nested analysis of variance model is appropriate. The advantages of this analytic approach are explained, and conditions are discussed under which more powerful test of treatment effects may be obtained. (Author/MA)

Leachates from solid wastes: chemical and eco(geno)toxicological differences between leachates obtained from fresh and stabilized industrial organic sludge.

PubMed

Chiochetta, Claudete G; Goetten, Luís C; Almeida, Sônia M; Quaranta, Gaetana; Cotelle, Sylvie; Radetski, Claudemir M

2014-01-01

The chemical and ecotoxicological characteristics of fresh and stabilized industrial organic sludge leachates were compared to obtain information regarding how the stabilization process can influence the ecotoxic potential of this industrial waste, which could be used for the amendment of degraded soil. Physicochemical analysis of the sludge leachates, as well as a battery of eco(geno)toxicity tests on bacteria, algae, daphnids, and higher plants (including Vicia faba genotoxicity test) and the determination of hydrolytic enzyme activity, was performed according to standard methods. The chemical comparison of the two types of leachate showed that the samples obtained from stabilized sludge had a lower organic content and higher metal content than leachates of the fresh sludge. The eco(geno)toxicological results obtained with aquatic organisms showed that the stabilized sludge leachate was more toxic than the fresh sludge leachate, both originating from the same industrial organic sludge sample. Nevertheless, phytotoxicity tests carried out with a reference peat soil irrigated with stabilized sludge leachate showed the same toxicity as the fresh sludge leachate. In the case of the industrial solid organic sludge studied, stabilization through a biodegradation process promoted a higher metal mobility/bioavailability/eco(geno)toxicity in the stabilized sludge leachate compared to the fresh sludge leachate.

Communication with patients during the prenatal testing procedure: an explorative qualitative study.

PubMed

van Zwieten, Myra; Willems, Dick; Knegt, Lia; Leschot, Nico

2006-10-01

While generally two phases of prenatal genetic counseling are distinguished, i.e. pre- and post-test counseling, we revealed a third form of communication during the testing procedure. The content of this intermediate communication was explored. A secondary analysis was performed on data obtained in another observational study, which was focussed on how indefinite testing results are clarified. Thirteen testing trajectories in which communication with parents took place during the testing procedure were further analysed. In the majority of cases the content of intermediate communication was similar to the content of pre-test counseling. In four cases the content was different, because the communication involved the parents in decision-making about a testing result, which was still being processed. Communication in (prenatal) genetic testing is not always restricted to separate phases, but can be an ongoing process occurring parallel to, and sometimes even intertwined with, the testing process. The advocated model of shared decision-making might work better once it is determined if the decision concerns the area wherein the provider is the expert, or the patient. Further research into the process of continuing decision-making could clarify how providers' and patients' responsibilities regarding the diagnostic process are distributed. Meanwhile, the possible occurrence of continuous decision-making should be mentioned in (prenatal) genetic counseling.

Characterization of PDMS samples with variation of its synthesis parameters for tunable optics applications

NASA Astrophysics Data System (ADS)

Marquez-Garcia, Josimar; Cruz-Félix, Angel S.; Santiago-Alvarado, Agustin; González-García, Jorge

2017-09-01

Nowadays the elastomer known as polydimethylsiloxane (PDMS, Sylgard 184), due to its physical properties, low cost and easy handle, have become a frequently used material for the elaboration of optical components such as: variable focal length liquid lenses, optical waveguides, solid elastic lenses, etc. In recent years, we have been working in the characterization of this material for applications in visual sciences; in this work, we describe the elaboration of PDMSmade samples, also, we present physical and optical properties of the samples by varying its synthesis parameters such as base: curing agent ratio, and both, curing time and temperature. In the case of mechanical properties, tensile and compression tests were carried out through a universal testing machine to obtain the respective stress-strain curves, and to obtain information regarding its optical properties, UV-vis spectroscopy is applied to the samples to obtain transmittance and absorbance curves. Index of refraction variation was obtained through an Abbe refractometer. Results from the characterization will determine the proper synthesis parameters for the elaboration of tunable refractive surfaces for potential applications in robotics.

Paternity tests in Mexico: Results obtained in 3005 cases.

PubMed

García-Aceves, M E; Romero Rentería, O; Díaz-Navarro, X X; Rangel-Villalobos, H

2018-04-01

National and international reports regarding the paternity testing activity scarcely include information from Mexico and other Latin American countries. Therefore, we report different results from the analysis of 3005 paternity cases analyzed during a period of five years in a Mexican paternity testing laboratory. Motherless tests were the most frequent (77.27%), followed by trio cases (20.70%); the remaining 2.04% included different cases of kinship reconstruction. The paternity exclusion rate was 29.58%, higher but into the range reported by the American Association of Blood Banks (average 24.12%). We detected 65 mutations, most of them involving one-step (93.8% and the remaining were two-step mutations (6.2%) thus, we were able to estimate the paternal mutation rate for 17 different STR loci: 0.0018 (95% CI 0.0005-0.0047). Five triallelic patterns and 12 suspected null alleles were detected during this period; however, re-amplification of these samples with a different Human Identification (HID) kit confirmed the homozygous genotypes, which suggests that most of these exclusions actually are one-step mutations. HID kits with ≥20 STRs detected more exclusions, diminishing the rate of inconclusive results with isolated exclusions (<3 loci), and leading to higher paternity indexes (PI). However, the Powerplex 21 kit (20 STRs) and Powerplex Fusion kit (22 STRs) offered similar PI (p = 0.379) and average number of exclusions (PE) (p = 0.339) when a daughter was involved in motherless tests. In brief, besides to report forensic parameters from paternity tests in Mexico, results describe improvements to solve motherless paternity tests using HID kits with ≥20 STRs instead of one including 15 STRs. Copyright © 2018 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Applying standard epidemiological methods for investigating foodborne disease outbreak in resource-poor settings: lessons from Vietnam.

PubMed

Vo, Thuan Huu; Nguyen, Dat Van; Le, Loan Thi Kim; Phan, Lan Trong; Nuorti, J Pekka; Tran Minh, Nguyen Nhu

2014-07-01

An outbreak of gastroenteritis occurred among workers of company X after eating lunch prepared by a catering service. Of 430 workers attending the meal, 56 were hospitalized with abdominal pain, diarrhea, vomiting, and nausea, according to the initial report. We conducted an investigation to identify the extent, vehicle, and source of the outbreak. In our case-control study, a case was a worker who attended the meal and who was hospitalized with acute gastroenteritis; controls were randomly selected from non-ill workers. Cases and controls were interviewed using a standard questionnaire. We used logistic regression to calculate adjusted odds ratios for the consumption of food items. Catering service facilities and food handlers working for the service were inspected. Food samples from the catering service were tested at reference laboratories. Of hospitalized cases, 54 fulfilled the case definition, but no stool specimens were collected for laboratory testing. Of four food items served during lunch, only "squash and pork soup" was significantly associated with gastroenteritis, with an adjusted odds ratio of 9.5 (95 % CI 3.2, 27.7). The caterer did not separate cooked from raw foods but used the same counter for both. Cooked foods were kept at room temperature for about 4 h before serving. Four of 14 food handlers were not trained on basic food safety principles and did not have health certificates. Although no microbiological confirmation was obtained, our epidemiological investigation suggested that squash and pork soup caused the outbreak. Hospitals should be instructed to obtain stool specimens from patients with gastroenteritis. Food catering services should be educated in basic food safety measures.

A study of the utilization of ERTS-1 data from the Wabash River Basin. [crop identification, water resources, urban land use, soil mapping, and atmospheric modeling

NASA Technical Reports Server (NTRS)

Landgrebe, D. A. (Principal Investigator)

1974-01-01

The author has identified the following significant results. The most significant results were obtained in the water resources research, urban land use mapping, and soil association mapping projects. ERTS-1 data was used to classify water bodies to determine acreages and high agreement was obtained with USGS figures. Quantitative evaluation was achieved of urban land use classifications from ERTS-1 data and an overall test accuracy of 90.3% was observed. ERTS-1 data classifications of soil test sites were compared with soil association maps scaled to match the computer produced map and good agreement was observed. In some cases the ERTS-1 results proved to be more accurate than the soil association map.

A new SETX mutation producing AOA2 in two siblings.

PubMed

Datta, Neil; Hohler, Anna

2013-09-01

In this paper, we document two cases of a new SETX mutation (820:A>G) combined with an established recessive SETX mutation (5927:T>G) causing ataxia with oculomotor apraxia type 2 (AOA2). The patients had a detailed neurological history and examination performed. Radiological imaging was obtained and genetic analysis was obtained. Both siblings demonstrated healthy and normal growth until adolescence. At that time, slowed speech, hypophonia, dysarthria, extraocular muscle dysfunction and some mild choreiform movements began to appear. Family history included some movement disorder difficulties in second degree relatives. The diagnosis of AOA2 was confirmed by genetic testing. We describe a new SETX gene mutation, which when combined with a recognized SETX mutation results in AOA2. The clinical, radiographic and ancillary testing are described.

Isothermal strand-displacement polymerase reaction for visual detection of the Southeast Asian-type deletion of α-thalassemia.

PubMed

Yu, Luxin; Wu, Wei; Lie, Puchang; Liu, Yunhua; Zeng, Lingwen

2013-11-01

A rapid and reliable screening test for thalassemia carrier couples is the most effective strategy to decrease the risk of conceiving fetuses with severe thalassemia. We present an approach based on the isothermal strand-displacement polymerase reaction and the use of a lateral flow strip for the visual detection of an α-thalassemia Southeast Asian-type deletion. This assay was used to evaluate 86 clinical samples (72 cases of Southeast Asian-type deletions and 14 cases of other types of thalassemia), and the results obtained were 100% consistent with those obtained using conventional gap-PCR. The approach thus provides a simple, sensitive, rapid, and cost-effective method for the diagnosis of thalassemia genotypes. Copyright © 2013 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

Pattern classification approach to characterizing solitary pulmonary nodules imaged on high-resolution computed tomography

NASA Astrophysics Data System (ADS)

McNitt-Gray, Michael F.; Hart, Eric M.; Goldin, Jonathan G.; Yao, Chih-Wei; Aberle, Denise R.

1996-04-01

The purpose of our study was to characterize solitary pulmonary nodules (SPN) as benign or malignant based on pattern classification techniques using size, shape, density and texture features extracted from HRCT images. HRCT images of patients with a SPN are acquired, routed through a PACS and displayed on a thoracic radiology workstation. Using the original data, the SPN is semiautomatically contoured using a nodule/background threshold. The contour is used to calculate size and several shape parameters, including compactness and bending energy. Pixels within the interior of the contour are used to calculate several features including: (1) nodule density-related features, such as representative Hounsfield number and moment of inertia, and (2) texture measures based on the spatial gray level dependence matrix and fractal dimension. The true diagnosis of the SPN is established by histology from biopsy or, in the case of some benign nodules, extended follow-up. Multi-dimensional analyses of the features are then performed to determine which features can discriminate between benign and malignant nodules. When a sufficient number of cases are obtained two pattern classifiers, a linear discriminator and a neural network, are trained and tested using a select subset of features. Preliminary data from nine (9) nodule cases have been obtained and several features extracted. While the representative CT number is a reasonably good indicator, it is an inconclusive predictor of SPN diagnosis when considered by itself. Separation between benign and malignant nodules improves when other features, such as the distribution of density as measured by moment of inertia, are included in the analysis. Software has been developed and preliminary results have been obtained which show that individual features may not be sufficient to discriminate between benign and malignant nodules. However, combinations of these features may be able to discriminate between these two classes. With additional cases and more features, we will be able to perform a feature selection procedure and ultimately to train and test pattern classifiers in this discrimination task.

Diagnosing viral and bacterial respiratory infections in acute COPD exacerbations by an electronic nose: a pilot study.

PubMed

van Geffen, Wouter H; Bruins, Marcel; Kerstjens, Huib A M

2016-06-16

Respiratory infections, viral or bacterial, are a common cause of acute exacerbations of chronic obstructive pulmonary disease (AECOPD). A rapid, point-of-care, and easy-to-use tool distinguishing viral and bacterial from other causes would be valuable in routine clinical care. An electronic nose (e-nose) could fit this profile but has never been tested in this setting before. In a single-center registered trial (NTR 4601) patients admitted with AECOPD were tested with the Aeonose(®) electronic nose, and a diagnosis of viral or bacterial infection was obtained by bacterial culture on sputa and viral PCR on nose swabs. A neural network with leave-10%-out cross-validation was used to assess the e-nose data. Forty three patients were included. In the bacterial infection model, 22 positive cases were tested versus the negatives; and similarly 18 positive cases were tested in the viral infection model. The Aeonose was able to distinguish between COPD-subjects suffering from a viral infection and COPD patients without infection, showing an area under the curve (AUC) of 0.74. Similarly, for bacterial infections, an AUC of 0.72 was obtained. The Aeonose e-nose yields promising results in 'smelling' the presence or absence of a viral or bacterial respiratory infection during an acute exacerbation of COPD. Validation of these results using a new and large cohort is required before introduction into clinical practice.

On the selection of user-defined parameters in data-driven stochastic subspace identification

NASA Astrophysics Data System (ADS)

Priori, C.; De Angelis, M.; Betti, R.

2018-02-01

The paper focuses on the time domain output-only technique called Data-Driven Stochastic Subspace Identification (DD-SSI); in order to identify modal models (frequencies, damping ratios and mode shapes), the role of its user-defined parameters is studied, and rules to determine their minimum values are proposed. Such investigation is carried out using, first, the time histories of structural responses to stationary excitations, with a large number of samples, satisfying the hypothesis on the input imposed by DD-SSI. Then, the case of non-stationary seismic excitations with a reduced number of samples is considered. In this paper, partitions of the data matrix different from the one proposed in the SSI literature are investigated, together with the influence of different choices of the weighting matrices. The study is carried out considering two different applications: (1) data obtained from vibration tests on a scaled structure and (2) in-situ tests on a reinforced concrete building. Referring to the former, the identification of a steel frame structure tested on a shaking table is performed using its responses in terms of absolute accelerations to a stationary (white noise) base excitation and to non-stationary seismic excitations of low intensity. Black-box and modal models are identified in both cases and the results are compared with those from an input-output subspace technique. With regards to the latter, the identification of a complex hospital building is conducted using data obtained from ambient vibration tests.

Comparison of intradermal dilutional testing, skin prick testing, and modified quantitative testing for common allergens.

PubMed

Peltier, Jacques; Ryan, Matthew W

2007-08-01

To compare and correlate wheal size using the Multi-Test II applicator with the endpoint obtained by intradermal dilutional testing (IDT) for 5 common allergens. To examine the safety of modified quantitative testing (MQT) for determining immunotherapy starting doses. Prospective comparative clinical study. A total of 134 subjects were simultaneously skin tested for immediate hypersensitivity using the Multi-Test II device and IDT. There was a 77% concordance between results from IDT and results from MQT. When there was a difference, MQT predicted a safer endpoint for starting immunotherapy in all but 2 cases. Wheal size by SPT is predictive of endpoint by IDT. MQT is nearly as effective as formal IDT in determining endpoint. Modified quantitative testing appears to be a safe alternative to IDT for determining starting doses for immunotherapy.

A New Method for Incremental Testing of Finite State Machines

NASA Technical Reports Server (NTRS)

Pedrosa, Lehilton Lelis Chaves; Moura, Arnaldo Vieira

2010-01-01

The automatic generation of test cases is an important issue for conformance testing of several critical systems. We present a new method for the derivation of test suites when the specification is modeled as a combined Finite State Machine (FSM). A combined FSM is obtained conjoining previously tested submachines with newly added states. This new concept is used to describe a fault model suitable for incremental testing of new systems, or for retesting modified implementations. For this fault model, only the newly added or modified states need to be tested, thereby considerably reducing the size of the test suites. The new method is a generalization of the well-known W-method and the G-method, but is scalable, and so it can be used to test FSMs with an arbitrarily large number of states.

Frequent hepatitis E in the Netherlands without traveling or immunosuppression.

PubMed

Koot, H; Hogema, B M; Koot, M; Molier, M; Zaaijer, H L

2015-01-01

In several Western countries, silent endemic hepatitis E virus (HEV) infection is common among blood donors. Immunocompromised persons may develop chronic hepatitis E, but the relevance of endemic HEV for immunocompetent persons remains largely unknown. We investigated the immune status and travel history in cases of hepatitis E in the Netherlands. Between January 2009 and May 2014, physicians throughout the Netherlands submitted samples from 4067 hepatitis patients to Sanquin Diagnostic Services for HEV antibody testing. For the 144 patients testing positive for HEV IgM and HEV RNA, travel behavior and immune status were assessed. Complete information was obtained for 81 patients. Surprisingly, the majority of patients (52/81, 64%) were immunocompetent and did not travel outside Europe. HEV genotyping was obtained for 47 non-traveling patients, all concerned HEV genotype 3. Our findings suggest that currently in Western countries the impact of hepatitis E for non-traveling, immunocompetent persons is underestimated. Historically cases of hepatitis A, B and C, but not cases of hepatitis E, are notifiable and warrant preventive measures. However, in parts of Western Europe HEV may have become the most important source of viral hepatitis, in immunocompetent and in immunosuppressed persons. Pending measures against the ongoing transmission of HEV genotype 3 in parts of Europe, physicians should consider hepatitis E in dealing with new hepatitis patients. Copyright © 2014 Elsevier B.V. All rights reserved.

Measuring growth index in a universe with massive neutrinos: A revisit of the general relativity test with the latest observations

NASA Astrophysics Data System (ADS)

Zhao, Ming-Ming; Zhang, Jing-Fei; Zhang, Xin

2018-04-01

We make a consistency test for the general relativity (GR) through measuring the growth index γ in a universe with massive (sterile/active) neutrinos. We employ the redshift space distortion measurements to do the analysis. To constrain other cosmological parameters, we also use other cosmological measurements, including the Planck 2015 cosmic microwave background temperature and polarization data, the baryon acoustic oscillation data, the type Ia supernova JLA data, the weak lensing galaxy shear data, and the Planck 2015 lensing data. In a universe with massive sterile neutrinos, we obtain γ =0.624-0.050+0.055, with the tension with the GR prediction γ = 0.55 at the 1.48σ level, showing that the consideration of sterile neutrinos still cannot make the true measurement of γ be well consistent with the GR prediction. In a universe with massive active neutrinos, we obtain γ = 0.663 ± 0.045 for the normal hierarchy case, γ =0.661-0.050+0.044 for the degenerate hierarchy case, and γ =0.668-0.051+0.045 for the inverted hierarchy case, with the tensions with GR all at beyond the 2σ level. We find that the consideration of massive active neutrinos (no matter what mass hierarchy is considered) almost does not influence the measurement of the growth index γ.

[Legionnaire's disease outbreak].

PubMed

Barrufet-Barqué, M Pilar; Sauca-Subias, Goretti; Force-Sanmartín, Lluís; Felip-Benach, Angela; Martínez-Pérez, Encarna; Capdevila-Morell, Josep A

2006-02-11

To describe an outbreak of Legionella pneumophila serogroup 1 in Mataró, Catalunya, Spain, in August 2002. The source of the microorganism was a cooling tower. Prospective and observational study with analysis of epidemiological, clinical, and microbiological data. 151 patients were affected (62% male), with a mean age of 58.4 years old. Seven patients were classified as Pontiac Fever and 144 suffered from pneumonia. The diagnosis of pneumonia was confirmed in 79% of cases, was considered suspicious in 14% and probable in 7%. Forty per cent of patients were smokers and 53.5% had comorbidities, mainly diabetes mellitus (22%). Chief symptoms were fever (97%), chills and muscular pain (63% respectively), headache (54%) and cough (53%). Pulmonary condensation was the more frequent radiological feature (71%). Normal pulmonary exploration was observed in 38%. Forty-three per cent of cases were severely ill, and 16% of patients belonged to Fine's IV and V class. Antigenuria was the most important test for diagnosis, which confirmed 76% of cases. Legionella spp. was obtained in respiratory secretions of 10 patients. Molecular analysis confirmed clonality between respiratory microorganisms and that obtained in the cooling tower. The outbreak involved an important number of subjects in a short period of time. Antigenuria was the most useful test. However, the isolation of L. pneumophila from patients permitted the prompt identification of microorganism's source in a cooling tower. The low mortality observed probably relates to a rapid diagnosis and its target treatment.

Acute hepatitis B virus window-period blood donations detected by individual-donation nucleic acid testing: a report on the first two cases found and interdicted in Spain.

PubMed

González, Rocio; Echevarria, José Manuel; Avellón, Ana; Barea, Luisa; Castro, Emma

2006-07-01

Mathematical models predict that, in Spain, a significant number of blood units will be obtained during the window period of the hepatitis B virus (HBV) infection. Routine nucleic acid testing (NAT) on individual blood units may provide experimental data to evaluate such a theoretical risk. Between February and July 2005, a total of 34,631 individual units were screened for HBV DNA by a multiplex transcription-mediated amplification (TMA) test. Units that repeatedly reacted in the test, but did not react for HBV surface antigen (HBsAg), were submitted to additional testing by both molecular and conventional assays, and the donors were recalled for follow-up studies and the collection of clinical and epidemiologic data. Confirmatory testing and follow-up studies identified 2 blood units donated during the HBV infection window period (1/17,316 units studied). Sequencing of amplification products obtained by nested polymerase chain reaction (n-PCR) revealed two HBV strains from genotypes D/ayw3 and F/adw4q-, but did not identify HBsAg mutants. The HBV DNA concentration in the index donations was estimated to be below the n-PCR detection level (180 IU/mL), in both cases. One donor developed acute hepatitis 2 months after donating blood, but the other remained asymptomatic and displayed normal alanine aminotransferase levels at follow-up. The HBV infection window period is a real issue in the setting of Spanish blood transfusions. NAT of individual units by TMA would make a significant contribution to improving the safety of the blood supply in Spain. Additional studies involving a larger number of units and longer periods of time are required, however, to ascertain the true incidence of the problem in this country.

How Well Does Physician Selection of Microbiologic Tests Identify Clostridium difficile and other Pathogens in Paediatric Diarrhoea? Insights Using Multiplex PCR-Based Detection

PubMed Central

Stockmann, Chris; Rogatcheva, Margarita; Harrel, Brian; Vaughn, Mike; Crisp, Rob; Poritz, Mark; Thatcher, Stephanie; Korgenski, Ernest K; Barney, Trenda; Daly, Judy; Pavia, Andrew T

2014-01-01

The objective of this study was to compare the aetiologic yield of standard of care microbiologic testing ordered by physicians with that of a multiplex PCR platform. Stool specimens obtained from children and young adults with gastrointestinal illness were evaluated by standard laboratory methods and a developmental version of the FilmArray Gastrointestinal Diagnostic System (FilmArray GI Panel), a rapid multiplex PCR platform that detects 23 bacterial, viral, and protozoal agents. Results were classified according to the microbiologic tests requested by the treating physician. A median of 3 (range 1-10) microbiologic tests were performed by the clinical laboratory during 378 unique diarrhoeal episodes. A potential aetiologic agent was identified in 46% of stool specimens by standard laboratory methods and in 65% of specimens tested using the FilmArray GI Panel (P<0.001). For those patients who only had Clostridium difficile testing requested, an alternative pathogen was identified in 29% of cases with the FilmArray GI Panel. Notably, 11 (12%) cases of norovirus were identified among children who only had testing for C. difficile ordered. Among those who had C. difficile testing ordered in combination with other tests, an additional pathogen was identified in 57% of stool specimens with the FilmArray GI Panel. For patients who had no C. difficile testing performed, the FilmArray GI Panel identified a pathogen in 63% of cases, including C. difficile in 8%. Physician-specified laboratory testing may miss important diarrhoeal pathogens. Additionally, standard laboratory testing is likely to underestimate co-infections with multiple infectious diarrhoeagenic agents. PMID:25599941

Laboratory confirmation of measles in elimination settings: experience from the Republic of the Marshall Islands, 2003.

PubMed

Hyde, Terri B; Nandy, Robin; Hickman, Carole J; Langidrik, Justina R; Strebel, Peter M; Papania, Mark J; Seward, Jane F; Bellini, William J

2009-02-01

To highlight the complications involved in interpreting laboratory tests of measles immunoglobulin M (IgM) for confirmation of infection during a measles outbreak in a highly vaccinated population after conducting a mass immunization campaign as a control measure. This case study was undertaken in the Republic of the Marshall Islands during a measles outbreak in 2003, when response immunization was conducted. A measles case was defined as fever and rash and one or more of cough, coryza or conjunctivitis. Between 13 July and 7 November 2003, serum samples were obtained from suspected measles cases for serologic testing and nasopharyngeal swabs were taken for viral isolation by reverse transcriptase polymerase chain reaction (RT-PCR). Specimens were collected from 201 suspected measles cases (19% of total): of the ones that satisfied the clinical case definition, 45% were IgM positive (IgM+) and, of these, 24% had received measles vaccination within the previous 45 days (up to 45 days after vaccination an IgM+ result could be due to either vaccination or wild-type measles infection). The proportion of IgM+ results varied with clinical presentation, the timing of specimen collection and vaccination status. Positive results on RT-PCR occurred in specimens from eight IgM-negative and four IgM+ individuals who had recently been vaccinated. During measles outbreaks, limiting IgM testing to individuals who meet the clinical case definition and have not been recently vaccinated allows for measles to be confirmed while conserving resources.

Performance of Dengue Diagnostic Tests in a Single-Specimen Diagnostic Algorithm.

PubMed

Hunsperger, Elizabeth A; Muñoz-Jordán, Jorge; Beltran, Manuela; Colón, Candimar; Carrión, Jessica; Vazquez, Jesus; Acosta, Luz Nereida; Medina-Izquierdo, Juan F; Horiuchi, Kalanthe; Biggerstaff, Brad J; Margolis, Harold S

2016-09-15

Anti-dengue virus (DENV) immunoglobulin M (IgM) seroconversion has been the reference standard for dengue diagnosis. However, paired specimens are rarely obtained, and the interval for this testing negates its usefulness in guiding clinical case management. The presence of DENV viremia and appearance of IgM during the febrile phase of dengue provides the framework for dengue laboratory diagnosis by using a single serum specimen. Archived paired serum specimens (n = 1234) from patients with laboratory-confirmed dengue from 2005 through 2011 were used to determine the diagnostic performance of real-time reverse transcription polymerase chain reaction (RT-PCR), for detection of DENV serotypes 1-4, and enzyme-linked immunosorbent assays (ELISAs), for detection of DENV nonstructural protein 1 (NS1) antigen and anti-DENV IgM. During 1-3 days after illness onset, real-time RT-PCR and NS1 antigen testing detected 82%-69% and 90%-84% of cases, respectively, as viremia levels declined, while anti-DENV IgM ELISA detected 5%-41% of cases as antibody appeared. Over the 10-day period of the febrile phase of dengue, the cumulative effect of using these 3 types of tests in a diagnostic algorithm confirmed ≥90% of dengue cases. The use of molecular or NS1 antigen tests to detect DENV and one to detect anti-DENV IgM in a single serum specimen collected during the first 10 days of illness accurately identified ≥90% of dengue primary and secondary cases. Published by Oxford University Press for the Infectious Diseases Society of America 2016. This work is written by (a) US Government employee(s) and is in the public domain in the US.

A Next Generation Sequencing custom gene panel as first line diagnostic tool for atypical cases of syndromic obesity: Application in a case of Alström syndrome.

PubMed

Maltese, Paolo E; Iarossi, Giancarlo; Ziccardi, Lucia; Colombo, Leonardo; Buzzonetti, Luca; Crinò, Antonino; Tezzele, Silvia; Bertelli, Matteo

2018-02-01

Obesity phenotype can be manifested as an isolated trait or accompanied by multisystem disorders as part of a syndromic picture. In both situations, same molecular pathways may be involved to different degrees. This evidence is stronger in syndromic obesity, in which phenotypes of different syndromes may overlap. In these cases, genetic testing can unequivocally provide a final diagnosis. Here we describe a patient who met the diagnostic criteria for Alström syndrome only during adolescence. Genetic testing was requested at 25 years of age for a final confirmation of the diagnosis. The genetic diagnosis of Alström syndrome was obtained through a Next Generation Sequencing genetic test approach using a custom-designed gene panel of 47 genes associated with syndromic and non-syndromic obesity. Genetic analysis revealed a novel homozygous frameshift variant p.(Arg1550Lysfs*10) on exon 8 of the ALMS1 gene. This case shows the need for a revision of the diagnostic criteria guidelines, as a consequence of the recent advent of massive parallel sequencing technology. Indications for genetic testing reported in these currently accepted diagnostic criteria for Alström syndrome, were drafted when sequencing was expensive and time consuming. Nowadays, Next Generation Sequencing testing could be considered as first line diagnostic tool not only for Alström syndrome but, more generally, for all those atypical or not clearly distinguishable cases of syndromic obesity, thus avoiding delayed diagnosis and treatments. Early diagnosis permits a better follow-up and pre-symptomatic interventions. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Cost-effectiveness of the Carbon-13 Urea Breath Test for the Detection of Helicobacter Pylori

PubMed Central

Masucci, L; Blackhouse, G; Goeree, R

2013-01-01

Objectives This analysis aimed to evaluate the cost-effectiveness of various testing strategies for Helicobacter pylori in patients with uninvestigated dyspepsia and to calculate the budgetary impact of these tests for the province of Ontario. Data Sources Data on the sensitivity and specificity were obtained from the clinical evidence-based analysis. Resource items were obtained from expert opinion, and costs were applied on the basis of published sources as well as expert opinion. Review Methods A decision analytic model was constructed to compare the costs and outcomes (false-positive results, false-negative results, and misdiagnoses avoided) of the carbon-13 (13C) urea breath test (UBT), enzyme-linked immunosorbent assay (ELISA) serology test, and a 2-step strategy of an ELISA serology test and a confirmatory 13C UBT based on the sensitivity and specificity of the tests and prevalence estimates. Results The 2-step strategy is more costly and more effective than the ELISA serology test and results in $210 per misdiagnosis case avoided. The 13C UBT is dominated by the 2-step strategy, i.e., it is more costly and less effective. The budget impact analysis indicates that it will cost $7.9 million more to test a volume of 129,307 patients with the 13C UBT than with ELISA serology, and $4.7 million more to test these patients with the 2-step strategy. Limitations The clinical studies that were pooled varied in the technique used to perform the breath test and in reference standards used to make comparisons with the breath test. However, these parameters were varied in a sensitivity analysis. The economic model was designed to consider intermediate outcomes only (i.e., misdiagnosed cases) and was not a complete model with final patient outcomes (e.g., quality-adjusted life years). Conclusions Results indicate that the 2-step strategy could be economically attractive for the testing of H. pylori. However, testing with the 2-step strategy will cost the Ministry of Health and Long-Term Care $4.7 million more than with the ELISA serology test. PMID:24228083

Cervical lymphadenitis: tuberculosis or tularaemia?

PubMed

Karabay, O; Kilic, S; Gurcan, S; Pelitli, T; Karadenizli, A; Bozkurt, H; Bostanci, S

2013-02-01

Both tuberculosis cervical lymphadenitis (TCL) and oropharyngeal tularaemia (OT) have similar signs, symptoms and pathological findings. We aimed to investigate the frequency of tularaemia antibodies in patients diagnosed with TCL. Using data from the Tuberculosis Control Dispensaries between the years of 2008 and 2011 in Turkey, all patients diagnosed with TCL were informed about and included in the study. Control group subjects were selected from healthy blood donors who lived in the same region. After informed consent was obtained, the sera obtained from volunteer TCL patients and the control group were tested with a microagglutination technique for Francisella tularensis. Antibodies to Brucella were also investigated with a tube agglutination test for cross-reactivity in sera that were seropositive for tularaemia. Sera were obtained from a total of 1170 individuals in the TCL group and 596 in the control group from 67 of 81 provinces in Turkey. Francisella tularensis-positive antibodies were found in 79 (6.75%) cases in the TCL group and two (0.33%) cases in the control group with a titre of ≥1:80 (p < 0.01). When the presence of antibody of any titre was considered, the ratio became 8.2% (96/1170) in the TCL group and 0.67% (4/596) in the control group (p < 0.001). For the first time, with this study, tularaemia serology was found to be positive in a significant portion (6.75%) of diagnosed cases of TCL. In tularaemia endemic regions, it was concluded that tularaemia serology should be investigated in patients suspected of having TCL. © 2012 The Authors Clinical Microbiology and Infection © 2012 European Society of Clinical Microbiology and Infectious Diseases.

Isolating DNA from sexual assault cases: a comparison of standard methods with a nuclease-based approach

PubMed Central

2012-01-01

Background Profiling sperm DNA present on vaginal swabs taken from rape victims often contributes to identifying and incarcerating rapists. Large amounts of the victim’s epithelial cells contaminate the sperm present on swabs, however, and complicate this process. The standard method for obtaining relatively pure sperm DNA from a vaginal swab is to digest the epithelial cells with Proteinase K in order to solubilize the victim’s DNA, and to then physically separate the soluble DNA from the intact sperm by pelleting the sperm, removing the victim’s fraction, and repeatedly washing the sperm pellet. An alternative approach that does not require washing steps is to digest with Proteinase K, pellet the sperm, remove the victim’s fraction, and then digest the residual victim’s DNA with a nuclease. Methods The nuclease approach has been commercialized in a product, the Erase Sperm Isolation Kit (PTC Labs, Columbia, MO, USA), and five crime laboratories have tested it on semen-spiked female buccal swabs in a direct comparison with their standard methods. Comparisons have also been performed on timed post-coital vaginal swabs and evidence collected from sexual assault cases. Results For the semen-spiked buccal swabs, Erase outperformed the standard methods in all five laboratories and in most cases was able to provide a clean male profile from buccal swabs spiked with only 1,500 sperm. The vaginal swabs taken after consensual sex and the evidence collected from rape victims showed a similar pattern of Erase providing superior profiles. Conclusions In all samples tested, STR profiles of the male DNA fractions obtained with Erase were as good as or better than those obtained using the standard methods. PMID:23211019

Analysis of selected data from the triservice missile data base

NASA Technical Reports Server (NTRS)

Allen, Jerry M.; Shaw, David S.; Sawyer, Wallace C.

1989-01-01

An extremely large, systematic, axisymmetric-body/tail-fin data base has been gathered through tests of an innovative missile model design which is described herein. These data were originally obtained for incorporation into a missile aerodynamics code based on engineering methods (Program MISSILE3), but these data are also valuable as diagnostic test cases for developing computational methods because of the individual-fin data included in the data base. Detailed analyses of four sample cases from these data are presented to illustrate interesting individual-fin force and moment trends. These samples quantitatively show how bow shock, fin orientation, fin deflection, and body vortices can produce strong, unusual, and computationally challenging effects on individual fin loads. Flow-visualization photographs are examined to provide physical insight into the cause of these effects.

Comparison of PLIF and CFD Results for the Orion CEV RCS Jets

NASA Technical Reports Server (NTRS)

Ivey, Christopher B.; Danehy, Paul M.; Bathel, Brett F.; Dyakonov, Artem A.; Inman, Jennifer A.; Jones, Stephen B.

2011-01-01

Nitric-oxide planar laser-induced fluorescence (NO PLIF) was used to visualize and measure centerline streamwise velocity of the Orion Crew Exploration Vehicle (CEV) Reaction Control System (RCS) Jets at NASA Langley Research Center's 31-Inch Mach 10 Air wind tunnel. Fluorescence flow visualizations of pitch, roll, and yaw RCS jets were obtained using different plenum pressures and wind tunnel operating stagnation pressures. For two yaw RCS jet test cases, the PLIF visualizations were compared to computational flow imaging (CFI) images based on Langley Aerothermal Upwind Relaxation Algorithm (LAURA) computational fluid dynamics (CFD) simulations of the flowfield. For the same test cases, the streamwise velocity measurements were compared to CFD. The CFD solution, while showing some unphysical artifacts, generally agree with the experimental measurements.

Numerical solution of modified differential equations based on symmetry preservation.

PubMed

Ozbenli, Ersin; Vedula, Prakash

2017-12-01

In this paper, we propose a method to construct invariant finite-difference schemes for solution of partial differential equations (PDEs) via consideration of modified forms of the underlying PDEs. The invariant schemes, which preserve Lie symmetries, are obtained based on the method of equivariant moving frames. While it is often difficult to construct invariant numerical schemes for PDEs due to complicated symmetry groups associated with cumbersome discrete variable transformations, we note that symmetries associated with more convenient transformations can often be obtained by appropriately modifying the original PDEs. In some cases, modifications to the original PDEs are also found to be useful in order to avoid trivial solutions that might arise from particular selections of moving frames. In our proposed method, modified forms of PDEs can be obtained either by addition of perturbation terms to the original PDEs or through defect correction procedures. These additional terms, whose primary purpose is to enable symmetries with more convenient transformations, are then removed from the system by considering moving frames for which these specific terms go to zero. Further, we explore selection of appropriate moving frames that result in improvement in accuracy of invariant numerical schemes based on modified PDEs. The proposed method is tested using the linear advection equation (in one- and two-dimensions) and the inviscid Burgers' equation. Results obtained for these tests cases indicate that numerical schemes derived from the proposed method perform significantly better than existing schemes not only by virtue of improvement in numerical accuracy but also due to preservation of qualitative properties or symmetries of the underlying differential equations.

Assessment of rechargeable batteries for high power applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delnick, Frank M.; Ripple, Robert Eugene; Butler, Paul Charles

2004-05-01

This paper describes an assessment of a variety of battery technologies for high pulse power applications. Sandia National Laboratories (SNL) is performing the assessment activities in collaboration with NSWC-Dahlgren. After an initial study of specifications and manufacturers' data, the assessment team identified the following electrochemistries as promising for detailed evaluation: lead-acid (Pb-acid), nickel/metal hydride (Ni/MH), nickel/cadmium (Ni/Cd), and a recently released high power lithium-ion (Li-ion) technology. In the first three technology cases, test cells were obtained from at least two and in some instances several companies that specialize in the respective electrochemistry. In the case of the Li-ion technology, cellsmore » from a single company and are being tested. All cells were characterized in Sandia's battery test labs. After several characterization tests, the Pb-acid technology was identified as a backup technology for the demanding power levels of these tests. The other technologies showed varying degrees of promise. Following additional cell testing, the assessment team determined that the Ni/MH technology was suitable for scale-up and acquired 50-V Ni/MH modules from two suppliers for testing. Additional tests are underway to better characterize the Ni/Cd and the Li-ion technologies as well. This paper will present the testing methodology and results from these assessment activities.« less

Core compressor exit stage study. Volume 4: Data and performance report for the best stage configuration

NASA Technical Reports Server (NTRS)

Wisler, D. C.

1981-01-01

The core compressor exit stage study program develops rear stage blading designs that have lower losses in their endwall boundary layer regions. The test data and performance results for the best stage configuration consisting of Rotor-B running with Stator-B are described. The technical approach in this efficiency improvement program utilizes a low speed research compressor. Tests were conducted in two ways: (1) to use four identical stages of blading to obtain test data in a true multistage environment and (2) to use a single stage of blading to compare with the multistage test results. The effects of increased rotor tip clearances and circumferential groove casing treatment are evaluated.

Heat transfer direction dependence of heat transfer coefficients in annuli

NASA Astrophysics Data System (ADS)

Prinsloo, Francois P. A.; Dirker, Jaco; Meyer, Josua P.

2018-04-01

In this experimental study the heat transfer phenomena in concentric annuli in tube-in-tube heat exchangers at different annular Reynolds numbers, annular diameter ratios, and inlet fluid temperatures using water were considered. Turbulent flow with Reynolds numbers ranging from 15,000 to 45,000, based on the average bulk fluid temperature was tested at annular diameter ratios of 0.327, 0.386, 0.409 and 0.483 with hydraulic diameters of 17.00, 22.98, 20.20 and 26.18 mm respectively. Both heated and cooled annuli were investigated by conducting tests at a range of inlet temperatures between 10 °C to 30 °C for heating cases, and 30 °C to 50 °C for cooling cases. Of special interest was the direct measurement of local wall temperatures on the heat transfer surface, which is often difficult to obtain and evasive in data-sets. Continuous verification and re-evaluation of temperatures measurements were performed via in-situ calibration. It is shown that inlet fluid temperature and the heat transfer direction play significant roles on the magnitude of the heat transfer coefficient. A new adjusted Colburn j-factor definition is presented to describe the heating and cooling cases and is used to correlate the 894 test cases considered in this study.

Bayesian Estimation of Pneumonia Etiology: Epidemiologic Considerations and Applications to the Pneumonia Etiology Research for Child Health Study.

PubMed

Deloria Knoll, Maria; Fu, Wei; Shi, Qiyuan; Prosperi, Christine; Wu, Zhenke; Hammitt, Laura L; Feikin, Daniel R; Baggett, Henry C; Howie, Stephen R C; Scott, J Anthony G; Murdoch, David R; Madhi, Shabir A; Thea, Donald M; Brooks, W Abdullah; Kotloff, Karen L; Li, Mengying; Park, Daniel E; Lin, Wenyi; Levine, Orin S; O'Brien, Katherine L; Zeger, Scott L

2017-06-15

In pneumonia, specimens are rarely obtained directly from the infection site, the lung, so the pathogen causing infection is determined indirectly from multiple tests on peripheral clinical specimens, which may have imperfect and uncertain sensitivity and specificity, so inference about the cause is complex. Analytic approaches have included expert review of case-only results, case-control logistic regression, latent class analysis, and attributable fraction, but each has serious limitations and none naturally integrate multiple test results. The Pneumonia Etiology Research for Child Health (PERCH) study required an analytic solution appropriate for a case-control design that could incorporate evidence from multiple specimens from cases and controls and that accounted for measurement error. We describe a Bayesian integrated approach we developed that combined and extended elements of attributable fraction and latent class analyses to meet some of these challenges and illustrate the advantage it confers regarding the challenges identified for other methods. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America.

Modern Airfoil Ice Accretions

NASA Technical Reports Server (NTRS)

Addy, Harold E., Jr.; Potapczuk, Mark G.; Sheldon, David W.

1997-01-01

This report presents results from the first icing tests performed in the Modem Airfoils program. Two airfoils have been subjected to icing tests in the NASA Lewis Icing Research Tunnel (IRT). Both airfoils were two dimensional airfoils; one was representative of a commercial transport airfoil while the other was representative of a business jet airfoil. The icing test conditions were selected from the FAR Appendix C envelopes. Effects on aerodynamic performance are presented including the effects of varying amounts of glaze ice as well as the effects of approximately the same amounts of glaze, mixed, and rime ice. Actual ice shapes obtained in these tests are also presented for these cases. In addition, comparisons are shown between ice shapes from the tests and ice shapes predicted by the computer code, LEWICE for similar conditions. Significant results from the tests are that relatively small amounts of ice can have nearly as much effect on airfoil lift coefficient as much greater amounts of ice and that glaze ice usually has a more detrimental effect than either rime or mixed ice. LEWICE predictions of ice shapes, in general, compared reasonably well with ice shapes obtained in the IRT, although differences in details of the ice shapes were observed.

Variable reluctance displacement transducer temperature compensated to 650$sup 0$F

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

In pressurized water reactor tests, compact instruments for accurate measurement of small displacements in a 650$sup 0$F environment are often required. In the case of blowdown tests such as the Loss of Fluid Test (LOFT) or Semiscale computer code development tests, not only is the initial environment water at 650$sup 0$F and 2200 psi but it undergoes a severe transient due to depressurization. Since the LOFT and Semiscale tests are run just for the purpose of obtaining data during the depressurization, instruments used to obtain the data must not give false outputs induced by the change in environment. A LOFTmore » rho v$sup 2$ probe and a Semiscale drag disk are described. Each utilizes a variable reluctance transducer (VRT) for indication of the drag-disk location and a torsion bar for drag-disk restoring force. The VRT, in addition to being thermally gain and null offset stable, is fabricated from materials known to be resistant to large nuclear radiation levels and has successfully passed a fast neutron radiation test of 2.7 x 10$sup 17$ nvt without failure. (auth)« less

Automated microaneurysm detection method based on double ring filter in retinal fundus images

NASA Astrophysics Data System (ADS)

Mizutani, Atsushi; Muramatsu, Chisako; Hatanaka, Yuji; Suemori, Shinsuke; Hara, Takeshi; Fujita, Hiroshi

2009-02-01

The presence of microaneurysms in the eye is one of the early signs of diabetic retinopathy, which is one of the leading causes of vision loss. We have been investigating a computerized method for the detection of microaneurysms on retinal fundus images, which were obtained from the Retinopathy Online Challenge (ROC) database. The ROC provides 50 training cases, in which "gold standard" locations of microaneurysms are provided, and 50 test cases without the gold standard locations. In this study, the computerized scheme was developed by using the training cases. Although the results for the test cases are also included, this paper mainly discusses the results for the training cases because the "gold standard" for the test cases is not known. After image preprocessing, candidate regions for microaneurysms were detected using a double-ring filter. Any potential false positives located in the regions corresponding to blood vessels were removed by automatic extraction of blood vessels from the images. Twelve image features were determined, and the candidate lesions were classified into microaneurysms or false positives using the rule-based method and an artificial neural network. The true positive fraction of the proposed method was 0.45 at 27 false positives per image. Forty-two percent of microaneurysms in the 50 training cases were considered invisible by the consensus of two co-investigators. When the method was evaluated for visible microaneurysms, the sensitivity for detecting microaneurysms was 65% at 27 false positives per image. Our computerized detection scheme could be improved for helping ophthalmologists in the early diagnosis of diabetic retinopathy.

Identification of facilitators and barriers to residents' use of a clinical reasoning tool.

PubMed

DiNardo, Deborah; Tilstra, Sarah; McNeil, Melissa; Follansbee, William; Zimmer, Shanta; Farris, Coreen; Barnato, Amber E

2018-03-28

While there is some experimental evidence to support the use of cognitive forcing strategies to reduce diagnostic error in residents, the potential usability of such strategies in the clinical setting has not been explored. We sought to test the effect of a clinical reasoning tool on diagnostic accuracy and to obtain feedback on its usability and acceptability. We conducted a randomized behavioral experiment testing the effect of this tool on diagnostic accuracy on written cases among post-graduate 3 (PGY-3) residents at a single internal medical residency program in 2014. Residents completed written clinical cases in a proctored setting with and without prompts to use the tool. The tool encouraged reflection on concordant and discordant aspects of each case. We used random effects regression to assess the effect of the tool on diagnostic accuracy of the independent case sets, controlling for case complexity. We then conducted audiotaped structured focus group debriefing sessions and reviewed the tapes for facilitators and barriers to use of the tool. Of 51 eligible PGY-3 residents, 34 (67%) participated in the study. The average diagnostic accuracy increased from 52% to 60% with the tool, a difference that just met the test for statistical significance in adjusted analyses (p=0.05). Residents reported that the tool was generally acceptable and understandable but did not recognize its utility for use with simple cases, suggesting the presence of overconfidence bias. A clinical reasoning tool improved residents' diagnostic accuracy on written cases. Overconfidence bias is a potential barrier to its use in the clinical setting.

Prediction of magnitude of minimum horizontal stress from extended leak-off test conducted by the riser vessel CHIKYU

NASA Astrophysics Data System (ADS)

Lin, W.; Masago, H.; Yamamoto, K.; Kawamura, Y.; Saito, S.; Kinoshita, M.

2007-12-01

By means of introduction of the drilling vessel 'CHIKYU', riser drilling operations using mud fluid will be carried out in NanTroSEIZE Stage 2 for the first time as an oceanic scientific-drilling. For determining drilling operation parameter such as a mud density, a downhole experiment, leak-off test (LOT) or extended leak-off test (XLOT), is going to be implemented next to casing and cementing at each casing shoe during the drilling process. Data of the downhole experiment aimed for operation can also be used for an important scientific application to obtain in-situ stress information which is necessary for various cases of scientific drillings such as seismogenic zone drillings etc. In order to examine feasibility of the application of the LOT or XLOT data, we analyzed an example of XLOT conducted by the riser vessel CHIKYU during its Shimokita shakedown cruise, 2006; and then estimated magnitude of minimum principal stress in horizontal plane, Shmin. Moreover, we will propose the test procedures to possibly improve the quality of stress result from the applications of LOT or XLOT. The XLOT of Shimokita cruise was conducted under following conditions; 1180 m water depth, 525 mbsf (meter below seafloor) depth, 1030 kg/m3 fluid density (seawater) and 80 litter/min injection flow-rate. Estimated magnitude of the Shmin is equal to 18.3 MPa based on the assumption that fracture closure pressure balances with the minimum principal stress perpendicular to the fracture plane. For comparison, the vertical stress magnitude at the depth was estimated from density profile of core samples retrieved from the same borehole; and was equal to 20 MPa approximately. These two values can be considered to be not disagreement. Therefore, we can say that the XLOT data is valuable and practical for estimating the magnitude of minimum horizontal stress. From the viewpoint of determining stress magnitude, the XLOT is more essential rather than the LOT because it might be hardly to obtain reliable Shmin magnitude only by leak-off pressure which is exclusive stress-related parameter obtained from the latter. In addition, implementation of the LOT/XLOT multi-cycles (3 cycles) is preferable if possible. The first cycle with a lower maximum injection pressure is for knowing permeable property of the formation and for examining whether there is pre-existing fracture(s). The second cycle is a normal XLOT; and the third one is the repeat of the second one for confirm the pressure values obtained from the XLOTs.

An innovative iterative thresholding algorithm for tumour segmentation and volumetric quantification on SPECT images: Monte Carlo-based methodology and validation.

PubMed

Pacilio, M; Basile, C; Shcherbinin, S; Caselli, F; Ventroni, G; Aragno, D; Mango, L; Santini, E

2011-06-01

Positron emission tomography (PET) and single-photon emission computed tomography (SPECT) imaging play an important role in the segmentation of functioning parts of organs or tumours, but an accurate and reproducible delineation is still a challenging task. In this work, an innovative iterative thresholding method for tumour segmentation has been proposed and implemented for a SPECT system. This method, which is based on experimental threshold-volume calibrations, implements also the recovery coefficients (RC) of the imaging system, so it has been called recovering iterative thresholding method (RIThM). The possibility to employ Monte Carlo (MC) simulations for system calibration was also investigated. The RIThM is an iterative algorithm coded using MATLAB: after an initial rough estimate of the volume of interest, the following calculations are repeated: (i) the corresponding source-to-background ratio (SBR) is measured and corrected by means of the RC curve; (ii) the threshold corresponding to the amended SBR value and the volume estimate is then found using threshold-volume data; (iii) new volume estimate is obtained by image thresholding. The process goes on until convergence. The RIThM was implemented for an Infinia Hawkeye 4 (GE Healthcare) SPECT/CT system, using a Jaszczak phantom and several test objects. Two MC codes were tested to simulate the calibration images: SIMIND and SimSet. For validation, test images consisting of hot spheres and some anatomical structures of the Zubal head phantom were simulated with SIMIND code. Additional test objects (flasks and vials) were also imaged experimentally. Finally, the RIThM was applied to evaluate three cases of brain metastases and two cases of high grade gliomas. Comparing experimental thresholds and those obtained by MC simulations, a maximum difference of about 4% was found, within the errors (+/- 2% and +/- 5%, for volumes > or = 5 ml or < 5 ml, respectively). Also for the RC data, the comparison showed differences (up to 8%) within the assigned error (+/- 6%). ANOVA test demonstrated that the calibration results (in terms of thresholds or RCs at various volumes) obtained by MC simulations were indistinguishable from those obtained experimentally. The accuracy in volume determination for the simulated hot spheres was between -9% and 15% in the range 4-270 ml, whereas for volumes less than 4 ml (in the range 1-3 ml) the difference increased abruptly reaching values greater than 100%. For the Zubal head phantom, errors ranged between 9% and 18%. For the experimental test images, the accuracy level was within +/- 10%, for volumes in the range 20-110 ml. The preliminary test of application on patients evidenced the suitability of the method in a clinical setting. The MC-guided delineation of tumor volume may reduce the acquisition time required for the experimental calibration. Analysis of images of several simulated and experimental test objects, Zubal head phantom and clinical cases demonstrated the robustness, suitability, accuracy, and speed of the proposed method. Nevertheless, studies concerning tumors of irregular shape and/or nonuniform distribution of the background activity are still in progress.

Poliovirus excretion among persons with primary immune deficiency disorders: summary of a seven-country study series.

PubMed

Li, Li; Ivanova, Olga; Driss, Nadia; Tiongco-Recto, Marysia; da Silva, Rajiva; Shahmahmoodi, Shohreh; Sazzad, Hossain M S; Mach, Ondrej; Kahn, Anna-Lea; Sutter, Roland W

2014-11-01

Persons with primary immune deficiency disorders (PID), especially those disorders affecting the B-cell system, are at substantially increased risk of paralytic poliomyelitis and can excrete poliovirus chronically. However, the risk of prolonged or chronic excretion is not well characterized in developing countries. We present a summary of a country study series on poliovirus excretion among PID cases. Cases with PID from participating institutions were enrolled during the first year and after obtaining informed consent were tested for polioviruses in stool samples. Those cases excreting poliovirus were followed on a monthly basis during the second year until 2 negative stool samples were obtained. A total of 562 cases were enrolled in Bangladesh, China, Iran, Philippines, Russia, Sri Lanka, and Tunisia during 2008-2013. Of these, 17 (3%) shed poliovirus, including 2 cases with immunodeficient vaccine-derived poliovirus. Poliovirus was detected in a single sample from 5/17 (29%) cases. One case excreted for more than 6 months. None of the cases developed paralysis during the study period. Chronic polioviruses excretion remains a rare event even among individuals with PID. Nevertheless, because these individuals were not paralyzed they would have been missed by current surveillance; therefore, surveillance for polioviruses among PID should be established. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Variable size computer-aided detection prompts and mammography film reader decisions

PubMed Central

Gilbert, Fiona J; Astley, Susan M; Boggis, Caroline RM; McGee, Magnus A; Griffiths, Pamela M; Duffy, Stephen W; Agbaje, Olorunsola F; Gillan, Maureen GC; Wilson, Mary; Jain, Anil K; Barr, Nicola; Beetles, Ursula M; Griffiths, Miriam A; Johnson, Jill; Roberts, Rita M; Deans, Heather E; Duncan, Karen A; Iyengar, Geeta

2008-01-01

Introduction The purpose of the present study was to investigate the effect of computer-aided detection (CAD) prompts on reader behaviour in a large sample of breast screening mammograms by analysing the relationship of the presence and size of prompts to the recall decision. Methods Local research ethics committee approval was obtained; informed consent was not required. Mammograms were obtained from women attending routine mammography at two breast screening centres in 1996. Films, previously double read, were re-read by a different reader using CAD. The study material included 315 cancer cases comprising all screen-detected cancer cases, all subsequent interval cancers and 861 normal cases randomly selected from 10,267 cases. Ground truth data were used to assess the efficacy of CAD prompting. Associations between prompt attributes and tumour features or reader recall decisions were assessed by chi-squared tests. Results There was a highly significant relationship between prompting and a decision to recall for cancer cases and for a random sample of normal cases (P < 0.001). Sixty-four per cent of all cases contained at least one CAD prompt. In cancer cases, larger prompts were more likely to be recalled (P = 0.02) for masses but there was no such association for calcifications (P = 0.9). In a random sample of 861 normal cases, larger prompts were more likely to be recalled (P = 0.02) for both mass and calcification prompts. Significant associations were observed with prompting and breast density (p = 0.009) for cancer cases but not for normal cases (P = 0.05). Conclusions For both normal cases and cancer cases, prompted mammograms were more likely to be recalled and the prompt size was also associated with a recall decision. PMID:18724867

Variable size computer-aided detection prompts and mammography film reader decisions.

PubMed

Gilbert, Fiona J; Astley, Susan M; Boggis, Caroline Rm; McGee, Magnus A; Griffiths, Pamela M; Duffy, Stephen W; Agbaje, Olorunsola F; Gillan, Maureen Gc; Wilson, Mary; Jain, Anil K; Barr, Nicola; Beetles, Ursula M; Griffiths, Miriam A; Johnson, Jill; Roberts, Rita M; Deans, Heather E; Duncan, Karen A; Iyengar, Geeta

2008-01-01

The purpose of the present study was to investigate the effect of computer-aided detection (CAD) prompts on reader behaviour in a large sample of breast screening mammograms by analysing the relationship of the presence and size of prompts to the recall decision. Local research ethics committee approval was obtained; informed consent was not required. Mammograms were obtained from women attending routine mammography at two breast screening centres in 1996. Films, previously double read, were re-read by a different reader using CAD. The study material included 315 cancer cases comprising all screen-detected cancer cases, all subsequent interval cancers and 861 normal cases randomly selected from 10,267 cases. Ground truth data were used to assess the efficacy of CAD prompting. Associations between prompt attributes and tumour features or reader recall decisions were assessed by chi-squared tests. There was a highly significant relationship between prompting and a decision to recall for cancer cases and for a random sample of normal cases (P < 0.001). Sixty-four per cent of all cases contained at least one CAD prompt. In cancer cases, larger prompts were more likely to be recalled (P = 0.02) for masses but there was no such association for calcifications (P = 0.9). In a random sample of 861 normal cases, larger prompts were more likely to be recalled (P = 0.02) for both mass and calcification prompts. Significant associations were observed with prompting and breast density (p = 0.009) for cancer cases but not for normal cases (P = 0.05). For both normal cases and cancer cases, prompted mammograms were more likely to be recalled and the prompt size was also associated with a recall decision.

Crankshaft motion in a highly congested bis(triarylmethyl)peroxide.

PubMed

Khuong, Tinh-Alfredo V; Zepeda, Gerardo; Sanrame, Carlos N; Dang, Hung; Bartberger, Michael D; Houk, K N; Garcia-Garibay, Miguel A

2004-11-17

Crankshaft motion has been proposed in the solid state for molecular fragments consisting of three or more rotors linked by single bonds, whereby the two terminal rotors are static and the internal rotors experience circular motion. Bis-[tri-(3,5-di-tert-butyl)phenylmethyl]-peroxide 2 was tested as a model in search of crankshaft motion at the molecular level. In the case of peroxide 2, the bulky trityl groups may be viewed as the external static rotors, while the two peroxide oxygens can undergo the sought after internal rotation. Evidence for this process in the case of peroxide 2 was obtained from conformational dynamics determined by variable-temperature (13)C and (1)H NMR between 190 and 375 K in toluene-d(8). Detailed spectral assignments for the interpretation of two coalescence processes were based on a correlation between NMR spectra obtained in solution at low temperature, in the solid state by (13)C CPMAS NMR, and by GIAO calculations based on a B3LYP/6-31G structure of 2 obtained from its X-ray coordinates as the input. Evidence supporting crankshaft rotation rather than slippage of the trityl groups was obtained from molecular mechanics calculations.

Variations in the detection of anti-PEDV antibodies in serum samples using three diagnostic tests - short communication.

PubMed

Plut, Jan; Toplak, Ivan; Štukelj, Marina

2018-06-01

Over the last few years several porcine epidemic diarrhoea (PED) outbreaks have been discovered in Europe including the first PED case in Slovenia in January 2015. The aim of this study was to determine when PED virus (PEDV) infection started in Slovenia. Serum samples collected between 2012 and 2016 were tested. Three hundred and seventy-five serum samples were collected from 132 Slovenian small, one-site pig farms. Samples were tested for PEDV antibodies utilising three different serological methods: commercially-available indirect ELISA, in-house blocking ELISA test and Immunoperoxidase Monolayer Assay (IPMA) test. One hundred and seventy (45.33%) tested samples were found positive by the commercially-available ELISA test kit, and 10 (5.68%) of these 170 samples found positive were positive by the in-house blocking ELISA. Only these 10 samples were collected from a farm where clinical signs of PED infection had been observed and PEDV was confirmed by RT-PCR methodology; the other 160 samples were collected randomly. Thirty-two samples with the highest S/P value obtained with the commercial ELISA were all negative with IPMA. Reasons for the high variance in the results obtained remain unclear; more research is required to ensure higher sensitivity and specificity in terms of PEDV antibody tests and other PED diagnostic methods.

[Evaluation of a Legionella outbreak emerged in a recently opening hotel].

PubMed

Erdoğan, Haluk; Arslan, Hande

2013-04-01

Legionnaires' disease (LD) is a systemic infection caused by Legionella species especially colonized in the water systems. Hotels are common locations in which waterwork-associated sporadic or epidemic legionellosis can be detected. The aim of this study was to evaluate a small Legionella outbreak emerged in a recently opened 600-bed hotel in Alanya, a touristic county in Mediterranean part of Turkey. A 66 years old male patient who stayed in this hotel opened on May 15th, 2009, was admitted to our hospital on May 21st, 2009 with the complaints of high fever, headache and diarrhea lasting for three days. Since chest X-ray revealed non-homogenous density increase in left middle and inferior zone, the patient was diagnosed as atypical pneumoniae and LD was confirmed by positive urinary Legionella antigen test (Card test, BinaxNOW®Legionella Urinary Antigen Test; Alere Co, USA) result. Following the identification of the index case, the records of our hospital were reviewed and revealed another case being treated with the diagnosis of community acquired pneumonia who was also the guest of the same hotel. This patient was then diagnosed as LD by positive urinary antigen test. Since new cases were identified during the following days (May 22, 25 and 26) the Antalya County Health Department and hotel management were informed about a cluster of LD. In addition subsequent investigation for environmental surveillance and water sampling were conducted. The LD diagnosis and environmental inspections were performed according to the procedure described in the guideline from "Turkish Ministry of Health Travel-Associated Legionnaires' Disease Control Programme". Five definitive cases and one presumptive case of LD were identified during the outbreak period (May 20-26, 2009). All of the cases were successfully treated (intravenous ciprofloxacin or levofloxacin or clarithromycin), however one patient died due to sudden death during sleep after being discharged. Since sputum samples could not be obtained from the cases, the diagnosis were not confirmed by culture but by urinary antigen test. Besides high antibody titer in single serum sample was accepted as a diagnostic marker. Additionally 26 cases who accommodated in the same hotel and presented with high fever without pneumonia were treated in the outpatient clinics of our hospital. Urinary antigen test was performed in 11 of those patients to confirm the prediagnosis of pontiac fever, however all were found negative. Likewise convalescent phase sera for the confirmation of the diagnosis by seroconversion could not be obtained since they all were foreign tourists. Investigation of water sources of the hotel revealed that the municipal drinking water network had not been connected yet and the hotel supplied water from groundwater sources. The analysis of multiple samples from multiple sites of hotel's water system indicated that the water temperature was between 35-45°C and the iron level was beyond the acceptable limits (245 µg/L) recommended for drinking water in the regulation guides. These properties were considered as the factors that enhanced the growth and survival of Legionella species. Water samples were cultivated on BCYE-_ (Buffered Charcoal Yeast Extract a-Ketoglutarate) and GVPC (Glycine-Vancomycin-Polymyxin-Cycloheximide) agar plates and 11 out of a total 13 samples yielded Legionella spp. growth. All isolates were identified as L.pneumophila serogroup 1 by specific antisera. Legionella decontamination of hotel's water system was managed by implementation of hyperchlorination method as well as superheating (> 60°C) of water. The hotel was not closed during the outbreak and cultures of water samples obtained for one year later did not yield any Legionella spp. growth. This outbreak emphasized that hotel residents are at risk for acquiring LD in the presence of a colonized water system, even in a newly constructed building. In conclusion, effective control and decontamination programmes for the prevention of Legionella colonization should be applied even in new opening hotels.

[Clinical observation of isolated congenital anosmia].

PubMed

Li, Li; Wei, Yong-xiang; Wang, Ning-yu; Miao, Xu-tao; Yang, Ling; Ge, Xiao-hui; Wu, Ying; Liu, Jia; Tian, Jun; Li, Kun-yan; Liu, Chun-li

2013-12-01

To introduce 8 patients with isolated congenital anosmia and to discuss the clinical manifestations, imaging characteristics and family characteristics of this rarely seen disorder. Eight patients with isolated congenital anosmia treated between April 2007 and April 2012 were reviewed retrospectively. There were 4 males and 4 females. A detailed medical history collection, physical examination, nasal endoscopy, T&T and Sniffin'Sticks subjective olfactory function tests, olfactory event-related potentials sinonasal computed tomography scan and sex hormones level monitoring were performed in all patients. Seven cases underwent magnetic resonance image of olfactory pathway examination. All patients were anosmia without evidence of other defects. ENT physical examination, nasal endoscopy and computed tomography scan were normal except 4 cases with obvious nasal septum deviation, 2 cases with concha bullosa. Subjective olfactory test indicated all of them were anosmia. Olfactory event-related potentials were obtained in only 1 patient. Magnetic resonance imaging revealed the smaller or atrophy olfactory bulb and olfactory tract in five cases, the absence of olfactory bulbs and tracts in two case. A female patient did not have MRI examination because of wearing IUDs. Detection of 8 patients of sex hormones were normal. Family characteristics: 3 patients showed family inheritance pattern. The diagnosis of isolated congenital anosmia should be based on chief complaint, medical history, physical examination, olfactory test, nasal endoscopy, olfactory testing, olfactory imaging and olfactory event-related potentials. Magnetic resonance image of olfactory pathway and olfactory event-related potentials have important value for the diagnosis. More attention should be paid to the genetic susceptibility of the family.

Diagnosis and clinical characteristics of congenital anosmia: case series report.

PubMed

Qu, Qiuyi; Liu, Jianfeng; Ni, Daofeng; Zhang, Qiuhang; Yang, Dazhang; Wang, Naya; Wu, Xueyan; Han, Honglei

2010-12-01

congenital anosmia is extremely rare and tends to present late. We report on a series of patients with congenital anosmia to analyze its clinical characteristics and present illustrative cases. retrospective chart review. tertiary care centre. thirty-five patients with congenital anosmia were reviewed. A thorough medical history taking, physical examination, and nasal endoscopy were performed in all patients. T&T olfactory testing (n = 33), olfactory event-related potentials (OERPs) (n = 33), and sinonasal computed tomography (CT) (n = 35) were carried out. Magnetic resonance images (MRIs) of the olfactory pathway (n = 34) were available. Serum sex hormones were tested (n = 33). physical examination, olfactory testing, MRI of the olfactory pathway, and serum sex hormones. twenty cases were isolated congenital anosmia (ICA). Fifteen cases were congenital anosmia with other anomalies, including 12 cases with Kallmann syndrome (KS), two with CHARGE syndrome, and one with hypoplasia of the nasal cavity and nasal sinus. T&T olfactory testing indicated anosmia (n = 33). No OERP was obtained (n = 33). CT scans indicated three abnormal patients, including two with unilateral choanal atresia and one with hypoplasia of the nasal cavity and sinus. MRI demonstrated aplasia or hypoplasia of the olfactory bulbs, tracts, and olfactory sulci (n = 34). Serum sex hormones were low in 12 patients with KS. early diagnosis of congenital anosmia on the basis of olfactory symptoms is difficult. MRI of the olfactory pathway plays an important role in anatomic location. ICA is the most common congenital anosmia. KS is the primary presentation of congenital anosmia with other anomalies.

Invariant models in the inversion of gravity and magnetic fields and their derivatives

NASA Astrophysics Data System (ADS)

Ialongo, Simone; Fedi, Maurizio; Florio, Giovanni

2014-11-01

In potential field inversion problems we usually solve underdetermined systems and realistic solutions may be obtained by introducing a depth-weighting function in the objective function. The choice of the exponent of such power-law is crucial. It was suggested to determine it from the field-decay due to a single source-block; alternatively it has been defined as the structural index of the investigated source distribution. In both cases, when k-order derivatives of the potential field are considered, the depth-weighting exponent has to be increased by k with respect that of the potential field itself, in order to obtain consistent source model distributions. We show instead that invariant and realistic source-distribution models are obtained using the same depth-weighting exponent for the magnetic field and for its k-order derivatives. A similar behavior also occurs in the gravity case. In practice we found that the depth weighting-exponent is invariant for a given source-model and equal to that of the corresponding magnetic field, in the magnetic case, and of the 1st derivative of the gravity field, in the gravity case. In the case of the regularized inverse problem, with depth-weighting and general constraints, the mathematical demonstration of such invariance is difficult, because of its non-linearity, and of its variable form, due to the different constraints used. However, tests performed on a variety of synthetic cases seem to confirm the invariance of the depth-weighting exponent. A final consideration regards the role of the regularization parameter; we show that the regularization can severely affect the depth to the source because the estimated depth tends to increase proportionally with the size of the regularization parameter. Hence, some care is needed in handling the combined effect of the regularization parameter and depth weighting.

[EFFECTIVENESS OF ONE-STAGE REPAIR AND RECONSTRUCTION FOR KNEE DISLOCATION WITH MULTIPLE LIGAMENT INJURIES].

PubMed

Sun, Zhengyu; Zhang, Chenghao; Tang, Xin; Chen, Gang; Li, Jian

2016-06-08

To evaluate the surgical procedure and short-term effectiveness of one-stage repair and reconstruction of knee dislocation with multiple ligament injuries (KDMLI). Between September 2010 and April 2014, 9 cases (9 knees) of KDMLI were treated. There were 7 males and 2 females with an average age of 42 years (range, 27-57 years). Injury was caused by traffic accident in 3 cases, heavy-weight crushing in 3 cases, sports sprain in 2 cases, and falling from height in 1 case. The average time from injury to operation was 11 days (range, 3-19 days). The results of posterior drawer test and Lachman test were positive in all patients. The results of varus stress testing were three-degree positive in 4 cases, and the results of valgus stress testing were three-degree positive in 6 cases. The Lysholm score of knee was 27.2±6.3; the International Knee Documentation Committee (IKDC) score was 29.7±6.5; and the range of motion (ROM) was (52.6±12.8)°. All patients suffered from posterior cruciate ligament (PCL) injury and femoral avulsion injury of anterior cruciate ligament (ACL). Combined injuries included medial collateral ligament (MCL) injury in 4 cases (medial meniscus injury in 1 case), lateral collateral ligament (LCL) injury in 2 cases, and MCL and LCL injuries in 2 cases (medial meniscus and lateral meniscus injuries in 1 case). Autologous harmstring tendon was used to reconstruct PCL under arthroscopy combined with limited open in situ suture for repair of femoral avulsion injury of ACL, and repair of MCL, LCL, and other injury in one-stage operation. All incisions healed by first intention. Joint effusion of knee occurred in 1 case and was cured after removal of fluid combined with pressure bandage. All patients were followed up 12-36 months with an average of 22 months. At last follow-up, the result of posterior drawer test was negative in all patients. The results of Lachman test were one-degree positive in 2 cases; the result of varus stress testing was one-degree positive in 1 case; the results of valgus stress testing were one-degree positive in 2?cases; and flexion dysfunction of the knee was observed in 1 case. The Lysholm score of knee was 87.3±6.6; the IKDC score was 88.9±6.8; and the ROM was (121.7±12.3)°, all showing significant differences when compared with preoperative ones ( t =44.246, P =0.000; t =37.903, P =0.000; t =19.894, P =0.000). For KDMLI, one-stage repair and reconstruction using autologous harmstring tendon to reconst ruct PCL under arthroscopy combined with limited open in situ suture repair of femoral avulsion injury of ACL, and repair MCL, LCL, and other injury has such advantages as minimal invasiveness, reliable fixation, less complications, and fast recovery, which can significantly improve the stability, ROM, and function of knee and obtain good short-term effectiveness.

The preparation and investigation into properties of ionomer fiber

NASA Astrophysics Data System (ADS)

Ejigiri, Everest Emmanuel

The purpose of this study was to demonstrate the preparation and characterization of ionomer fiber. Two outstanding features of oriented-fiber composites are their high strength-to- weight ratio and controlled anisotropy which is because fibers are formed when polymer chains (in case of polymeric materials) are all lined up in the same direction. And the chains can pack together tightly. Materials can be made into fiber for the purpose of getting better properties and to make the application flexible. In this study, ionomer fiber was prepared. The physical and mechanical properties were examined through a variety of tests- including tensile test, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), free shape recovery test, and constrained stress recovery test. The ionomer fibers were made into muscles fiber, and the tensile actuation behavior of the muscle was studied. From the DMA, Storage modulus, loss modulus, tan delta and glass transition temperature were obtained. DSC was also used to obtain the glass transition temperature which also closely aligned with glass transition obtained from DMA. Also according to the test results, ionomer fiber (filament) demonstrated considerable stress recovery, high ductility and however, the filament did not produce high recovery ratio. The fiber was made into artificial muscle and actuation test was also carried out, which indicated that because the fiber being too much elastic - the fiber was not able to expand and contract when heat was applied to it. Instead it showed continuous expansion.

Degradation and ESR Failures in MnO2 Chip Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander A.

2017-01-01

Equivalent series resistance (ESR) of chip tantalum capacitors determines the rate of energy delivery and power dissipation thus affecting temperature and reliability of the parts. Employment of advanced capacitors with reduced ESR decreases power losses and improves efficiency in power systems. Stability of ESR is essential for correct operations of power units and might cause malfunctioning and failures when ESR becomes too high or too low. Several cases with ESR values in CWR29 capacitors exceeding the specified limit that were observed recently raised concerns regarding environmental factors affecting ESR and the adequacy of the existing screening and qualification testing. In this work, results of stress testing of various types of military and commercial capacitors obtained over years by GSFC test lab and NEPP projects that involved ESR measurements are described. Environmental stress tests include testing in humidity and vacuum chambers, temperature cycling, long-term storage at high temperatures, and various soldering simulation tests. Note that in many cases parts failed due to excessive leakage currents or reduced breakdown voltages. However, only ESR-related degradation and failures are discussed. Mechanisms of moisture effect are discussed and recommendations to improve screening and qualification system are suggested.

Characterization of Friction Stir Welded Tubes by Means of Tube Bulge Test

NASA Astrophysics Data System (ADS)

D'Urso, G.; Longo, M.; Giardini, C.

2011-05-01

Mechanical properties of friction stir welded joints are generally evaluated by means of conventional tensile test. This testing method might provide insufficient information because maximum strain obtained in tensile test before necking is small; moreover, the application of tensile test is limited when the joint path is not linear or even when the welds are executed on curved surfaces. Therefore, in some cases, it would be preferable to obtain the joints properties from other testing methods. Tube bulge test can be a valid solution for testing circumferential or longitudinal welds executed on tubular workpieces. The present work investigates the mechanical properties and the formability of friction stir welded tubes by means of tube bulge tests. The experimental campaign was performed on tubular specimens having a thickness of 3 mm and an external diameter of 40 mm, obtained starting from two semi-tubes longitudinally friction stir welded. The first step, regarding the fabrication of tubes, was performed combining a conventional forming process and friction stir welding. Sheets in Al-Mg-Si-Cu alloy AA6060 T6 were adopted for this purpose. Plates having a dimension of 225×60 mm were bent (with a bending axis parallel to the main dimension) in order to obtain semi-tubes. A particular care was devoted to the fabrication of forming devices (punch and die) in order to minimize the springback effects. Semi-tubes were then friction stir welded by means of a CNC machine tool. Some preliminary tests were carried out by varying the welding parameters, namely feed rate and rotational speed. A very simple tool having flat shoulder and cylindrical pin was used. The second step of the research was based on testing the welded tubes by means of tube bulge test. A specific equipment having axial actuators with a conical shape was adopted for this study. Some analyses were carried out on the tubes bulged up to a certain pressure level. In particular, the burst pressure and the wall thickness were measured for each tested tube.

Occupational asthma due to turpentine in art painter--case report.

PubMed

Dudek, Wojciech; Wittczak, Tomasz; Swierczyńska-Machura, Dominika; Walusiak-Skorupa, Jolanta; Pałczyński, Cezary

2009-01-01

Turpentine is a fluid obtained by distillation of wood resins containing mixture of terpens. It can act as an irritant and sensitiser. Most common health problem among workers exposed to turpentine is contact dermatitis. Little is know about turpentine to cause type I hypersensitivity reaction. We present a case of a 27-year old art painter using turpentine as a thinner for oil-based paints. She developed asthmatic reactions after 5 years of working with turpentine. A number of clinical procedures were performed, including clinical examination, routine laboratory tests, total serum IgE, skin prick tests to common aeroallergens, metal salts, oil-based paints and balsamic turpentine, resting spirometry test, histamine challenge, and a single-blind, placebo-controlled specific inhalation challenge with balsamic turpentine. Clinical findings and laboratory test results were normal but a significant bronchial hyperreactivity was found. During the specific challenge, dyspnoea and decreased forced expiratory volume (FEV1) were observed in late phase of asthmatic reaction. An increased proportion of eosinophils in induced sputum could also be noted 24 h after the challenge. Positive clinical response to the specific challenge as well as the morphological changes found in induced sputum served as the basis for diagnosing occupational asthma. To our knowledge, this is the first well-documented case of turpentine-induced occupational asthma.

Impact of a chromosome X STR Decaplex in deficiency paternity cases.

PubMed

Trindade-Filho, Aluisio; Ferreira, Samuel; Oliveira, Silviene F

2013-12-01

Deficiency paternity cases, characterized by the absence of the alleged father, are a challenge for forensic genetics. Here we present four cases with a female child and a deceased alleged father in which the analysis of a set of 21 or 22 autosomal STRs (AS STRs) produced results within a range of doubt when genotyping relatives of the alleged father. Aiming to increase the Paternity Index (PI) and obtain more reliable results, a set of 10 X-linked STR markers, developed by the Spanish and Portuguese Group of the International Society for Forensic Genetics (ISFG), was then added. Statistical analysis substantially shifted the results towards the alleged fatherhood in all four cases, with more dramatic changes when the supposed half-sister and respective mother were the relatives tested.

Impact of a chromosome X STR Decaplex in deficiency paternity cases

PubMed Central

Trindade-Filho, Aluisio; Ferreira, Samuel; Oliveira, Silviene F.

2013-01-01

Deficiency paternity cases, characterized by the absence of the alleged father, are a challenge for forensic genetics. Here we present four cases with a female child and a deceased alleged father in which the analysis of a set of 21 or 22 autosomal STRs (AS STRs) produced results within a range of doubt when genotyping relatives of the alleged father. Aiming to increase the Paternity Index (PI) and obtain more reliable results, a set of 10 X-linked STR markers, developed by the Spanish and Portuguese Group of the International Society for Forensic Genetics (ISFG), was then added. Statistical analysis substantially shifted the results towards the alleged fatherhood in all four cases, with more dramatic changes when the supposed half-sister and respective mother were the relatives tested. PMID:24385853

A controlled experiment in ground water flow model calibration

USGS Publications Warehouse

Hill, M.C.; Cooley, R.L.; Pollock, D.W.

1998-01-01

Nonlinear regression was introduced to ground water modeling in the 1970s, but has been used very little to calibrate numerical models of complicated ground water systems. Apparently, nonlinear regression is thought by many to be incapable of addressing such complex problems. With what we believe to be the most complicated synthetic test case used for such a study, this work investigates using nonlinear regression in ground water model calibration. Results of the study fall into two categories. First, the study demonstrates how systematic use of a well designed nonlinear regression method can indicate the importance of different types of data and can lead to successive improvement of models and their parameterizations. Our method differs from previous methods presented in the ground water literature in that (1) weighting is more closely related to expected data errors than is usually the case; (2) defined diagnostic statistics allow for more effective evaluation of the available data, the model, and their interaction; and (3) prior information is used more cautiously. Second, our results challenge some commonly held beliefs about model calibration. For the test case considered, we show that (1) field measured values of hydraulic conductivity are not as directly applicable to models as their use in some geostatistical methods imply; (2) a unique model does not necessarily need to be identified to obtain accurate predictions; and (3) in the absence of obvious model bias, model error was normally distributed. The complexity of the test case involved implies that the methods used and conclusions drawn are likely to be powerful in practice.Nonlinear regression was introduced to ground water modeling in the 1970s, but has been used very little to calibrate numerical models of complicated ground water systems. Apparently, nonlinear regression is thought by many to be incapable of addressing such complex problems. With what we believe to be the most complicated synthetic test case used for such a study, this work investigates using nonlinear regression in ground water model calibration. Results of the study fall into two categories. First, the study demonstrates how systematic use of a well designed nonlinear regression method can indicate the importance of different types of data and can lead to successive improvement of models and their parameterizations. Our method differs from previous methods presented in the ground water literature in that (1) weighting is more closely related to expected data errors than is usually the case; (2) defined diagnostic statistics allow for more effective evaluation of the available data, the model, and their interaction; and (3) prior information is used more cautiously. Second, our results challenge some commonly held beliefs about model calibration. For the test case considered, we show that (1) field measured values of hydraulic conductivity are not as directly applicable to models as their use in some geostatistical methods imply; (2) a unique model does not necessarily need to be identified to obtain accurate predictions; and (3) in the absence of obvious model bias, model error was normally distributed. The complexity of the test case involved implies that the methods used and conclusions drawn are likely to be powerful in practice.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soria-Lara, Julio A., E-mail: julio.soria-lara@ouce.ox.ac.uk; Bertolini, Luca, E-mail: l.bertolini@uva.nl; Brömmelstroet, Marco te, E-mail: M.C.G.teBrommelstroet@uva.nl

The integration of knowledge from stakeholders and the public at large is seen as one of the biggest process-related barriers during the scoping phase of EIA application in transport planning. While the academic literature offers abundant analyses, discussions and suggestions how to overcome this problem, the proposed solutions are yet to be adequately tested in practice. In order to address this gap, we test the effectiveness of a set of interventions and trigger mechanisms for improving different aspects of knowledge integration. The interventions are tested in an experiential study with two sequential cases, representing “close-to-real-life” conditions, in the context ofmore » two cities in Andalusia, Spain. In general terms, the participants perceived that the integration of knowledge improved during the simulation of the EIA scoping phase. Certain shortcomings were also discussed, fundamentally related to how the time spent during the scoping phase was crucial to lead an effective learning process between the involved people. The study concludes with a reflection on the effectiveness of the tested interventions according to similarities and differences obtained from the two experiential case studies, as well as with a discussion of the potential to generate new knowledge through the use of experiential studies in EIA practice. - Highlights: • It tests a set of interventions and mechanisms to improve the integration of knowledge. • The scoping phase of EIA is simulated to assess the effectiveness of interventions. • Two sequential case studies are used.« less

A Simulation Study Comparing Procedures for Assessing Individual Educational Growth. Report No. 182.

ERIC Educational Resources Information Center

Richards, James M., Jr.

A computer simulation procedure was developed to reproduce the overall pattern of results obtained in the Educational Testing Service Growth Study. Then simulated data for seven sets of 10,000 to 15,000 cases were analyzed, and findings compared on the basis of correlations between estimated and true growth scores. Findings showed that growth was…

Prevention of Stimulant Induced Euphoria with an Opioid Receptor Antagonist

DTIC Science & Technology

2017-02-28

7 obtaining vital signs, a urine pregnancy and drug test, and...enlistment. This number represented 38% of all cases of drug use [9]. Further surveys indicate that 10 % of military personnel abuse stimulants during...Expected Definitely Pharmacologic + Altered Dose/Changed schedule N/A 1770601 9/17/13 Early Waking Internal Mild Expected Possible None N/A 1770601 9/17

Sensemaking: A Structure for an Intelligence Revolution

DTIC Science & Technology

2011-03-01

level of distraction among drivers who are using cell phones reveal an associated , diminished driver capacity.32 Non...relationships among sparse and ambiguous data .”87 Th is book accepts that perspective and develops the psychological, behavioral , and social levels of...correlations revealed . Benjamin Kleinmuntz obtained a similar result using the “Twenty Questions” game and a set of test cases to add structure

Recent statistical methods for orientation data

NASA Technical Reports Server (NTRS)

Batschelet, E.

1972-01-01

The application of statistical methods for determining the areas of animal orientation and navigation are discussed. The method employed is limited to the two-dimensional case. Various tests for determining the validity of the statistical analysis are presented. Mathematical models are included to support the theoretical considerations and tables of data are developed to show the value of information obtained by statistical analysis.

Speech Adaptation to a Self-Inflicted Cosmetic Tongue Split: Perceptual and Ultrasonographic Analysis

ERIC Educational Resources Information Center

Bressmann, Tim

2006-01-01

In the cosmetic tongue split operation, the anterior tongue blade is split along the midline of the tongue. The goal of this case study was to obtain preliminary data on speech and tongue motility in a participant who had performed this operation on himself. The participant underwent an articulation test and a tongue motility assessment, as well…

Importance of transcatheter closure test for giant ventricular septal defect associated with pulmonary hypertension: a case with successful surgical repair of the defect.

PubMed

Shang, Xiaoke; Lu, Rong; Dong, Nianguo

2018-06-20

This is the first attempt to use a temporary occluder to close a giant perimembranous ventricular septal defect (32 mm), which obtains clinical evidence of good haemodynamics in patients with severe pulmonary hypertension. This may provide an alternative assessment to guide cardiac surgeons in determining a definitive treatment.

Error-rate prediction for programmable circuits: methodology, tools and studied cases

NASA Astrophysics Data System (ADS)

Velazco, Raoul

2013-05-01

This work presents an approach to predict the error rates due to Single Event Upsets (SEU) occurring in programmable circuits as a consequence of the impact or energetic particles present in the environment the circuits operate. For a chosen application, the error-rate is predicted by combining the results obtained from radiation ground testing and the results of fault injection campaigns performed off-beam during which huge numbers of SEUs are injected during the execution of the studied application. The goal of this strategy is to obtain accurate results about different applications' error rates, without using particle accelerator facilities, thus significantly reducing the cost of the sensitivity evaluation. As a case study, this methodology was applied a complex processor, the Power PC 7448 executing a program issued from a real space application and a crypto-processor application implemented in an SRAM-based FPGA and accepted to be embedded in the payload of a scientific satellite of NASA. The accuracy of predicted error rates was confirmed by comparing, for the same circuit and application, predictions with measures issued from radiation ground testing performed at the cyclotron Cyclone cyclotron of HIF (Heavy Ion Facility) of Louvain-la-Neuve (Belgium).

Studying the Relation of Postprandial Triglyceride with Coronary Artery Disease (CAD)

PubMed Central

Manochehri, Mohammad; Moghadam, Adel Johari

2016-01-01

Background: Coronary artery disease (CAD) is the most common cause of mortality worldwide and determination of contributing factors is essential. Aim: This study was conducted to study the relation of postprandial triglyceride as a risk of coronary artery disease in patients with proven CAD by angiography, referred to 502 Hospital of Army in 2015. Material and Methods: This observational study conducted as a case-control and contained 80 male participants referred to 502 Hospital of Army. Half of these participants had proven CAD by angiography test and the other ones were healthy as a control group. Fasting serum triglyceride was evaluated in all participants and postprandial TG was checked 4 hours after a standard meal. Obtained data were analyzed by SPSS ver. 13. Results: The results indicated that fasting TG and postprandial TG level were significantly higher in CAD patients (P-value=0.001). It was also shown evaluation of postprandial TG is more sensitive test than fasting TG in case of CAD patients. Conclusion: Our obtained results shown, evaluation of high level of postprandial TG is more reliable than fasting TG for patients whom suffer from CAD. PMID:27703285

Test wells TW1 and TW2, and TW3, White Sands Missile Range, Otero County, New Mexico

USGS Publications Warehouse

Myers, R.G.; Pinckley, K.M.

1987-01-01

Three test wells, TW1, TW2, and TW3, were drilled at White Sands Missile Range in south-central New Mexico in July, August, and October 1983 as part of a joint military training program sponsored by the U.S. Navy and U.S. Army in July, August, and October 1983. The test wells were drilled as exploratory and monitoring wells for the toxic waste storage facility at White Sands Missile Range. Information obtained from these wells includes lithologic logs for all wells and borehole-geophysical logs for the cased wells. (Author 's abstract)

Anejaculation following spinal cord injury does not induce sperm-agglutinating antibodies.

PubMed

Dahlberg, A; Hovatta, O

1989-02-01

Antisperm antibodies were tested for by the MAR-test and the tray agglutination test in 16 men with spinal cord injury. None of these men could ejaculate without artificial methods. Seven men ejaculated externally by vibrator stimulation or electroejaculation, while seven exhibited retrograde ejaculation; in two cases no semen was obtained. Sperm density in the external ejaculations was high (average = 405 x 10(6)/ml), with 10-45% motility. None of these 16 men had antisperm antibodies. This result indicates that anejaculation and sperm retention in men with spinal cord injury, even of 30 years duration, does not result in antisperm antibody formation.

Turbomachinery Laboratory Texas A and M University research progress on annular gas seals

NASA Technical Reports Server (NTRS)

Childs, Dara W.

1994-01-01

Three helically-grooved seals were tested and the results were compared to the MTI code SPIRALG. A smooth annular seal was tested at six eccentricity ratios from 0 to 0.5. The following are concluded in this viewgraph presentation: (1) Helical-grooved seals provide a substantial reduction in cross-coupled stiffness coefficients. Negative k(sub xy) values are obtained for no-swirl or low-swirl cases. (2) SPIRALG is completely unsuitable for the type of seal tested, namely, turbulent flow, wide grooves and lands, etc. (3) A good analysis code is needed to guide the design of helically-grooved annular seals including groove and smooth sections.

Laboratory diagnosis of Ebola virus disease and corresponding biosafety considerations in the China Ebola Treatment Center.

PubMed

Huang, Qing; Fu, Wei-Ling; You, Jian-Ping; Mao, Qing

2016-10-01

Ebola virus disease (EVD), caused by Ebola virus (EBOV), is a potent acute infectious disease with a high case-fatality rate. Etiological and serological EBOV detection methods, including techniques that involve the detection of the viral genome, virus-specific antigens and anti-virus antibodies, are standard laboratory diagnostic tests that facilitate confirmation or exclusion of EBOV infection. In addition, routine blood tests, liver and kidney function tests, electrolytes and coagulation tests and other diagnostic examinations are important for the clinical diagnosis and treatment of EVD. Because of the viral load in body fluids and secretions from EVD patients, all body fluids are highly contagious. As a result, biosafety control measures during the collection, transport and testing of clinical specimens obtained from individuals scheduled to undergo EBOV infection testing (including suspected, probable and confirmed cases) are crucial. This report has been generated following extensive work experience in the China Ebola Treatment Center (ETC) in Liberia and incorporates important information pertaining to relevant diagnostic standards, clinical significance, operational procedures, safety controls and other issues related to laboratory testing of EVD. Relevant opinions and suggestions are presented in this report to provide contextual awareness associated with the development of standards and/or guidelines related to EVD laboratory testing.

Mumps Outbreak in a Highly Vaccinated University-Affiliated Setting Before and After a Measles-Mumps-Rubella Vaccination Campaign-Iowa, July 2015-May 2016.

PubMed

Shah, Minesh; Quinlisk, Patricia; Weigel, Andrew; Riley, Jacob; James, Lisa; Patterson, James; Hickman, Carole; Rota, Paul A; Stewart, Rebekah; Clemmons, Nakia; Kalas, Nicholas; Cardemil, Cristina

2018-01-06

In response to a mumps outbreak at the University of Iowa and surrounding community, university, state, and local health officials implemented a vaccination campaign targeting students <25 years of age with an additional dose of measles-mumps-rubella (MMR) vaccine. More than 4700 vaccine campaign doses were administered; 97% were documented third doses. We describe the epidemiology of the outbreak before and after the campaign, focusing on cases in university students. Mumps cases were identified from reportable disease databases and university health system records. Detailed information on student cases was obtained from interviews, medical chart abstractions, university and state vaccination records, and state public health laboratory results. Pre- and postcampaign incidence among students, university faculty/staff, and community members <25 vs ≥25 years old were compared using Fisher exact test. Multivariable regression modeling was performed to identify variables associated with a positive mumps polymerase chain reaction test. Of 453 cases in the county, 301 (66%) occurred in university students. Student cases were primarily undergraduates (90%) and highly vaccinated (86% had 2 MMR doses, and 12% had 3 MMR doses). Fewer cases occurred in students after the campaign (75 [25%]) than before (226 [75%]). Cases in the target group (students <25 years of age) declined 9% postcampaign (P=.01). A positive mumps polymerase chain reaction test was associated with the presence of parotitis and early sample collection, and inversely associated with recent receipt of MMR vaccine. Following a large additional dose MMR vaccination campaign, fewer mumps cases occurred overall and in the target population. Published by Oxford University Press for the Infectious Diseases Society of America 2017. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Devices for SRF material characterization

DOE PAGES

Goudket, Philippe; Xiao, B.; Junginger, T.

2016-10-07

The surface resistance Rs of superconducting materials can be obtained by measuring the quality factor of an elliptical cavity excited in a transverse magnetic mode (TM010). The value obtained has however to be taken as averaged over the whole surface. A more convenient way to obtain Rs, especially of materials which are not yet technologically ready for cavity production, is to measure small samples instead. These can be easily man ufactured at low cost, duplicated and placed in film deposition and surface analytical tools. A commonly used design for a device to measure Rs consists of a cylindrical cavity excitedmore » in a transverse electric (TE110) mode with the sample under test serving as one replaceable endplate. Such a cavity has two drawbacks. For reasonably small samples the resonant frequency will be larger than frequencies of interest concerning SRF application and it requires a reference sample of known Rs. In this article we review several devices which have been designed to overcome these limitations, reaching sub - nΩ resolution in some cases. Some of these devices also comprise a parameter space in frequency and temperature which is inaccessible to standard cavity tests, making them ideal tools to test theoretical surface resistance models.« less

Devices for SRF material characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goudket, Philippe; Xiao, B.; Junginger, T.

The surface resistance Rs of superconducting materials can be obtained by measuring the quality factor of an elliptical cavity excited in a transverse magnetic mode (TM010). The value obtained has however to be taken as averaged over the whole surface. A more convenient way to obtain Rs, especially of materials which are not yet technologically ready for cavity production, is to measure small samples instead. These can be easily man ufactured at low cost, duplicated and placed in film deposition and surface analytical tools. A commonly used design for a device to measure Rs consists of a cylindrical cavity excitedmore » in a transverse electric (TE110) mode with the sample under test serving as one replaceable endplate. Such a cavity has two drawbacks. For reasonably small samples the resonant frequency will be larger than frequencies of interest concerning SRF application and it requires a reference sample of known Rs. In this article we review several devices which have been designed to overcome these limitations, reaching sub - nΩ resolution in some cases. Some of these devices also comprise a parameter space in frequency and temperature which is inaccessible to standard cavity tests, making them ideal tools to test theoretical surface resistance models.« less

Disubstituted thiourea derivatives and their activity on CNS: synthesis and biological evaluation.

PubMed

Stefanska, Joanna; Szulczyk, Daniel; Koziol, Anna E; Miroslaw, Barbara; Kedzierska, Ewa; Fidecka, Sylwia; Busonera, Bernardetta; Sanna, Giuseppina; Giliberti, Gabriele; La Colla, Paolo; Struga, Marta

2012-09-01

A series of new thiourea derivatives of 1,2,4-triazole have been synthesized. The difference in structures of obtained compounds are directly connected with the kind of isothiocyanate (aryl/alkyl). The (1)H NMR, (13)C NMR, MS methods were used to confirm structures of obtained thiourea derivatives. The molecular structure of (1, 17) was determined by an X-ray analysis. Two of the new compounds (8 and 14) were tested for their pharmacological activity on animal central nervous system (CNS) in behavioural animal tests. The results presented in this work indicate the possible involvement of the serotonergic system in the activity of 8 and 14. In the case of 14 is also a possible link between its activity and the endogenous opioid system. All obtained compounds were tested for antibacterial activity against gram-positive cocci, gram-negative rods and antifungal activity. Compounds (1, 2, 5, 7, 9) showed significant inhibition against gram-positive cocci. Microbiological evaluation was carried out over 20 standard strains and 30 hospital strains. Selected compounds (1-13) were examined for cytotoxicity, antitumor, and anti-HIV activity. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Experimental Aeroheating Study of Mid-L/D Entry Vehicle Geometries: NASA LaRC 20-Inch Mach 6 Air Tunnel Test 6966

NASA Technical Reports Server (NTRS)

Hollis, Brian R.; Hollingsworth, Kevin E.

2014-01-01

Aeroheating data on mid lift-to-drag ratio entry vehicle configurations has been obtained through hypersonic wind tunnel testing. Vehicles of this class have been proposed for high-mass Mars missions, such as sample return and crewed exploration, for which the conventional sphere-cone entry vehicle geometries of previous Mars missions are insufficient. Several configurations were investigated, including elliptically-blunted cylinders with both circular and elliptical cross sections, biconic geometries based on launch vehicle dual-use shrouds, and parametrically-optimized analytic geometries. Testing was conducted at Mach 6 over a range of Reynolds numbers sufficient to generate laminar, transitional, and turbulent flow. Global aeroheating data were obtained using phosphor thermography. Both stream-wise and cross-flow transition occured on different configurations. Comparisons were made with laminar and turbulent computational predictions generated with an algebraic turbulence model. Predictions were generally in good agreement in regions of laminar or fully-turbulent flow; however for transitional cases, the lack of a transition onset prediction capability produced less accurate comparisons. The data obtained in this study are intended to be used for prelimary mission design studies and the development and validation of computational methods.

The use of QSAR methods for determination of n-octanol/water partition coefficient using the example of hydroxyester HE-1

NASA Astrophysics Data System (ADS)

Guziałowska-Tic, Joanna

2017-10-01

According to the Directive of the European Parliament and of the Council concerning the protection of animals used for scientific purposes, the number of experiments involving the use of animals needs to be reduced. The methods which can replace animal testing include computational prediction methods, for instance, the quantitative structure-activity relationships (QSAR). These methods are designed to find a cohesive relationship between differences in the values of the properties of molecules and the biological activity of a series of test compounds. This paper compares the results of the author's own results of examination on the n-octanol/water coefficient for the hydroxyester HE-1 with those generated by means of three models: Kowwin, MlogP, AlogP. The test results indicate that, in the case of molecular similarity, the highest determination coefficient was obtained for the model MlogP and the lowest root-mean square error was obtained for the Kowwin method. When comparing the mean logP value obtained using the QSAR models with the value resulting from the author's own experiments, it was observed that the best conformity was that recorded for the model AlogP, where relative error was 15.2%.

Analysis and design of a second-order digital phase-locked loop

NASA Technical Reports Server (NTRS)

Blasche, P. R.

1979-01-01

A specific second-order digital phase-locked loop (DPLL) was modeled as a first-order Markov chain with alternatives. From the matrix of transition probabilities of the Markov chain, the steady-state phase error of the DPLL was determined. In a similar manner the loop's response was calculated for a fading input. Additionally, a hardware DPLL was constructed and tested to provide a comparison to the results obtained from the Markov chain model. In all cases tested, good agreement was found between the theoretical predictions and the experimental data.

Experimental and Computational Study of Underexpanded Jet Impingement Heat Transfer

NASA Technical Reports Server (NTRS)

Rufer, Shann J.; Nowak, Robert J.; Daryabeigi, Kamran; Picetti, Donald

2009-01-01

An experiment was performed to assess CFD modeling of a hypersonic-vehicle breach, boundary-layer flow ingestion and internal surface impingement. Tests were conducted in the NASA Langley Research Center 31-Inch Mach 10 Tunnel. Four simulated breaches were tested and impingement heat flux data was obtained for each case using both phosphor thermography and thin film gages on targets placed inside the model. A separate target was used to measure the surface pressure distribution. The measured jet impingement width and peak location are in good agreement with CFD analysis.

Paternity testing in case of brother-sister incest.

PubMed

Macan, Marijana; Uvodić, Petra; Botica, Vladimir

2003-06-01

We performed a paternity test in a case of incest between brother and sister. DNA from blood samples of the alleged parents and their two children was obtained with Chelex DNA extraction method and quantified with Applied Biosystems QuantiBlot quantitation kit. Polymerase chain reaction (PCR) amplification of DNA samples was performed with AmpFlSTR SGM Plus PCR amplification kit and GenePrint PowerPlex PCR amplification kit. The amplified products were separated and detected by using the Perkin Elmer's ABI PRISM trade mark 310 Genetic Analyser. DNA and data analysis of 17 loci and Amelogenin confirmed the suspicion of brother-sister incest. Since both children had inherited all of the obligate alleles from the alleged father, we could confirm with certainty of 99.999999% that the oldest brother in the family was the biological father of both children. Calculated data showed that even in a case of brother-sister incest, paternity could be proved by the analysis of Amelogenin and 17 DNA loci.

Evolutions in clinical reasoning assessment: The Evolving Script Concordance Test.

PubMed

Cooke, Suzette; Lemay, Jean-François; Beran, Tanya

2017-08-01

Script concordance testing (SCT) is a method of assessment of clinical reasoning. We developed a new type of SCT case design, the evolving SCT (E-SCT), whereby the patient's clinical story is "evolving" and with thoughtful integration of new information at each stage, decisions related to clinical decision-making become increasingly clear. We aimed to: (1) determine whether an E-SCT could differentiate clinical reasoning ability among junior residents (JR), senior residents (SR), and pediatricians, (2) evaluate the reliability of an E-SCT, and (3) obtain qualitative feedback from participants to help inform the potential acceptability of the E-SCT. A 12-case E-SCT, embedded within a 24-case pediatric SCT (PaedSCT), was administered to 91 pediatric residents (JR: n = 50; SR: n = 41). A total of 21 pediatricians served on the panel of experts (POE). A one-way analysis of variance (ANOVA) was conducted across the levels of experience. Participants' feedback on the E-SCT was obtained with a post-test survey and analyzed using two methods: percentage preference and thematic analysis. Statistical differences existed across levels of training: F = 19.31 (df = 2); p < 0.001. The POE scored higher than SR (mean difference = 10.34; p < 0.001) and JR (mean difference = 16.00; p < 0.001). SR scored higher than JR (mean difference = 5.66; p < 0.001). Reliability (Cronbach's α) was 0.83. Participants found the E-SCT engaging, easy to follow and true to the daily clinical decision-making process. The E-SCT demonstrated very good reliability and was effective in distinguishing clinical reasoning ability across three levels of experience. Participants found the E-SCT engaging and representative of real-life clinical reasoning and decision-making processes. We suggest that further refinement and utilization of the evolving style case will enhance SCT as a robust, engaging, and relevant method for the assessment of clinical reasoning.

Computation of asymmetric supersonic flows around cones at large incidence

NASA Technical Reports Server (NTRS)

Degani, David

1987-01-01

The Schiff-Steger parabolized Navier-Stokes (PNS) code has been modified to allow computation of conical flowfields around cones at high incidence. The improved algorithm of Degani and Schiff has been incorporated with the PNS code. This algorithm adds the cross derivative and circumferential viscous terms to the original PNS code and modifies the algebraic eddy viscosity turbulence model to take into account regions of so called cross-flow separation. Assuming the flowfield is conical (but not necessarily symmetric) a marching stepback procedure is used: the solution is marched one step downstream using improved PNS code and the flow variables are then scaled to place the solution back to the original station. The process is repeated until no change in the flow variables is observed with further marching. The flow variables are then constant along rays of the flowfield. The experiments obtained by Bannik and Nebbeling were chosen as a test case. In these experiments a cone of 7.5 deg. half angle at Mach number 2.94 and Reynolds number 1.372 x 10(7) was tested up 34 deg. angle of attack. At high angle of attack nonconical asymmetric leeward side vortex patterns were observed. In the first set of computations, using an earlier obtained solution of the above cone for angle of attack of 22.6 deg. and at station x=0.5 as a starting solution, the angle of attack was gradually increased up to 34 deg. During this procedure the grid was carfully adjusted to capture the bow shock. A stable, converged symmetric solution was obtained. Since the numerical code converged to a symmetric solution which is not the physical one, the stability was tested by a random perturbation at each point. The possible effect of surface roughness or non perfect body shape was also investigated. It was concluded that although the assumption of conical viscous flows can be very useful for certain cases, it can not be used for the present case. Thus the second part of the investigation attempted to obtain a marching (in space) solution with the PNS method using the conical solution as initial data. Finally, the solution of the full Navier-Stokes equations was carried out.

The use of multiwell culture plates in the duckweed toxicity test-a case study on Zn nanoparticles.

PubMed

Kalčíková, Gabriela; Marolt, Gregor; Kokalj, Anita Jemec; Gotvajn, Andreja Žgajnar

2018-06-11

Extensive production of nanomaterials of various properties needs to be coupled with rapid toxicity testing in order to provide information about their potential risks to the environment and human health. Miniaturization of toxicity tests may accelerate economical testing of nanomaterials, but is not a common practice. We describe a case study to miniaturize a commonly used toxicity test with plant duckweed Lemna minor. 6-well, 12-well and 24-well culture plates were used to assess their potential use for the duckweed toxicity test with potassium chloride as reference material. The results were compared to the standard test design using 100 mL glass beakers. The comparison showed that the best agreement was with the 6-well vessels. This set-up was further used for toxicity testing of zinc oxide nanoparticles (ZnO NP) and zinc chlorides. Zinc was not adsorbed onto either glass or plastic walls of the miniaturized system. We assume that in both vessels a fast agglomeration and settling of ZnO NP took place. Linear regression and statistical testing indicated a good correlation between the toxicity results obtained in the standard test and miniaturized 6-well vessels. The miniaturization of the test system for assessing the biological effect of nanomaterials on Lemna minor could become an appropriate alternative to the traditionally used high volume vessels. Copyright © 2018. Published by Elsevier B.V.

Dry friction aspects of Ni-based self-fluxing flame sprayed coatings

NASA Astrophysics Data System (ADS)

Paulin, C.; Chicet, D.; Paleu, V.; Benchea, M.; Lupescu, Ş.; Munteanu, C.

2017-08-01

In this paper we present the results tribological obtained in the course of dry wear tests on samples coated with three types of coatings produced from self-fluxing Ni-based powders. In this purpose were used three commercial NiCrBSi powders produced by various manufacturers, which have been sprayed against a low alloyed steel substrate using the flame spray thermal deposition method followed by flame remelting, resulting three different samples, denoted as: A, M and P. The first test was conducted on an Amsler type machine, with rolling motion between tribological contacts of third class. The analysed coating was deposited on the generator of the low alloy steel disc and the shoe was realized from a grindstone. The test was conducted for two situations: (a) constant load of 10 kg and 6 kg applied for 5 hours; (b) progressive load starting from 2 to 10 kg for two different speeds of rotation of the disc. The second test was the one of sliding wear and it was conducted on the UMTR 2M-CTR tribometer. The analysed layers were deposited on the flat surface of a low alloy steel lamella, and the friction was achieved with a conical grinding stone. The working parameters were as follows: 20N constant load, constant speed of 10 mm / s, sliding linear length of 30mm, the test duration being 45 minutes. After conducting the tests and after analysing the results, the following conclusions are drawn: a) during the first test has been obtained a global friction coefficient between 0.3 and 0.4 - typical for dry friction, highlighting some lower values in the case of sample A, in which case there were recorded smaller mass losses; b) at the second test was recorded an approximately linear behaviour of the three samples, with a gradual increase of the friction coefficient and a superficial wear mark revealed both by SEM microscopy and by profilometry.

A three-dimensional, compressible, laminar boundary-layer method for general fuselages. Volume 1: Numerical method

NASA Technical Reports Server (NTRS)

Wie, Yong-Sun

1990-01-01

A procedure for calculating 3-D, compressible laminar boundary layer flow on general fuselage shapes is described. The boundary layer solutions can be obtained in either nonorthogonal 'body oriented' coordinates or orthogonal streamline coordinates. The numerical procedure is 'second order' accurate, efficient and independent of the cross flow velocity direction. Numerical results are presented for several test cases, including a sharp cone, an ellipsoid of revolution, and a general aircraft fuselage at angle of attack. Comparisons are made between numerical results obtained using nonorthogonal curvilinear 'body oriented' coordinates and streamline coordinates.

Transient Pressure Test Article (TPTA) 1.1 and 1.1A, volume 1

NASA Technical Reports Server (NTRS)

Rebells, Clarence A.

1988-01-01

This final test report presents the results obtained during the static hot firing and cold-gas high Q tests of the first Transient Pressure Test Article (TPTA) 1.1. The TPTA consisted of field test joints A and B, which were the original RSRM J-insulation configuration, with a metal capture feature. It also consisted of a flight configuration nozzle-to-case test joint (Joint D) with shorter vent slots. Fluorocarbon O-rings were used in all the test joints. The purpose of the TPTA tests is to evaluate and characterize the RSMR field and nozzle-to-case joints under the influence of ignition and strut loads during liftoff anf high Q. All objectives of the cold-gas high Q (TPTA 1.1A) test were met and all measurements were close to predicted values. During the static hot-firing test (TPTA 1.1), the motor was inadvertently plugged by the quench injector plug, making it a more severe test, although no strut loads were applied. The motor was depressurized after approximately 11 min using an auxiliary system, and no anomalies were noted. In the static hot-firing test, pressure was incident on the insulation and the test joint gaps were within the predicted range. During the static hot-firing test, no strut loads were applied because the loading system malfunctioned. For this test, all measurements were within range of similar tests performed without strut loads.

Retrospective cost adaptive Reynolds-averaged Navier-Stokes k-ω model for data-driven unsteady turbulent simulations

NASA Astrophysics Data System (ADS)

Li, Zhiyong; Hoagg, Jesse B.; Martin, Alexandre; Bailey, Sean C. C.

2018-03-01

This paper presents a data-driven computational model for simulating unsteady turbulent flows, where sparse measurement data is available. The model uses the retrospective cost adaptation (RCA) algorithm to automatically adjust the closure coefficients of the Reynolds-averaged Navier-Stokes (RANS) k- ω turbulence equations to improve agreement between the simulated flow and the measurements. The RCA-RANS k- ω model is verified for steady flow using a pipe-flow test case and for unsteady flow using a surface-mounted-cube test case. Measurements used for adaptation of the verification cases are obtained from baseline simulations with known closure coefficients. These verification test cases demonstrate that the RCA-RANS k- ω model can successfully adapt the closure coefficients to improve agreement between the simulated flow field and a set of sparse flow-field measurements. Furthermore, the RCA-RANS k- ω model improves agreement between the simulated flow and the baseline flow at locations at which measurements do not exist. The RCA-RANS k- ω model is also validated with experimental data from 2 test cases: steady pipe flow, and unsteady flow past a square cylinder. In both test cases, the adaptation improves agreement with experimental data in comparison to the results from a non-adaptive RANS k- ω model that uses the standard values of the k- ω closure coefficients. For the steady pipe flow, adaptation is driven by mean stream-wise velocity measurements at 24 locations along the pipe radius. The RCA-RANS k- ω model reduces the average velocity error at these locations by over 35%. For the unsteady flow over a square cylinder, adaptation is driven by time-varying surface pressure measurements at 2 locations on the square cylinder. The RCA-RANS k- ω model reduces the average surface-pressure error at these locations by 88.8%.

Biometric Analysis – A Reliable Indicator for Diagnosing Taurodontism using Panoramic Radiographs

PubMed Central

Hegde, Veda; Anegundi, Rajesh Trayambhak; Pravinchandra, K.R.

2013-01-01

Background: Taurodontism is a clinical entity with a morpho–anatomical change in the shape of the tooth, which was thought to be absent in modern man. Taurodontism is mostly observed as an isolated trait or a component of a syndrome. Various techniques have been devised to diagnose taurodontism. Aim: The aim of this study was to analyze whether a biometric analysis was useful in diagnosing taurodontism, in radiographs which appeared to be normal on cursory observations. Setting and Design: This study was carried out in our institution by using radiographs which were taken for routine procedures. Material and Methods: In this retrospective study, panoramic radiographs were obtained from dental records of children who were aged between 9–14 years, who did not have any abnormality on cursory observations. Biometric analyses were carried out on permanent mandibular first molar(s) by using a novel biometric method. The values were tabulated and analysed. Statistics: Fischer exact probability test, Chi square test and Chi-square test with Yates correction were used for statistical analysis of the data. Results: Cursory observation did not yield us any case of taurodontism. In contrast, the biometric analysis yielded us a statistically significant number of cases of taurodontism. However, there was no statistically significant difference in the number of cases with taurodontism, which was obtained between the genders and the age group which was considered. Conclusion: Thus, taurodontism was diagnosed on a biometric analysis, which was otherwise missed on a cursory observation. It is therefore necessary from the clinical point of view, to diagnose even the mildest form of taurodontism by using metric analysis rather than just relying on a visual radiographic assessment, as its occurrence has many clinical implications and a diagnostic importance. PMID:24086912

Biometric Analysis - A Reliable Indicator for Diagnosing Taurodontism using Panoramic Radiographs.

PubMed

Hegde, Veda; Anegundi, Rajesh Trayambhak; Pravinchandra, K R

2013-08-01

Taurodontism is a clinical entity with a morpho-anatomical change in the shape of the tooth, which was thought to be absent in modern man. Taurodontism is mostly observed as an isolated trait or a component of a syndrome. Various techniques have been devised to diagnose taurodontism. The aim of this study was to analyze whether a biometric analysis was useful in diagnosing taurodontism, in radiographs which appeared to be normal on cursory observations. This study was carried out in our institution by using radiographs which were taken for routine procedures. In this retrospective study, panoramic radiographs were obtained from dental records of children who were aged between 9-14 years, who did not have any abnormality on cursory observations. Biometric analyses were carried out on permanent mandibular first molar(s) by using a novel biometric method. The values were tabulated and analysed. Fischer exact probability test, Chi square test and Chi-square test with Yates correction were used for statistical analysis of the data. Cursory observation did not yield us any case of taurodontism. In contrast, the biometric analysis yielded us a statistically significant number of cases of taurodontism. However, there was no statistically significant difference in the number of cases with taurodontism, which was obtained between the genders and the age group which was considered. Thus, taurodontism was diagnosed on a biometric analysis, which was otherwise missed on a cursory observation. It is therefore necessary from the clinical point of view, to diagnose even the mildest form of taurodontism by using metric analysis rather than just relying on a visual radiographic assessment, as its occurrence has many clinical implications and a diagnostic importance.

Application of the inverse analysis for determining the material properties of the woven fabrics for macroscopic approach

NASA Astrophysics Data System (ADS)

Oleksik, Mihaela; Oleksik, Valentin

2013-05-01

The current paper intends to realise a fast method for determining the material characteristics in the case of composite materials used in the airbags manufacturing. For determining the material data needed for other complex numerical simulations at macroscopic level there was used the inverse analysis method. In fact, there were carried out tensile tests for the composite material extracted along two directions - the direction of the weft and the direction of the warp and afterwards there were realised numerical simulations (using the Ls-Dyna software). A second stage consisted in the numerical simulation through the finite element method and the experimental testing for the Bias test. The material characteristics of the composite fabric material were then obtained by applying a multicriterial analysis using the Ls-Opt software, for which there was imposed a decrease of the mismatch between the force-displacement curves obtained numerically and experimentally, respectively, for both directions (weft and warp) as well as the decrease of the mismatch between the strain - extension curves for two points at the Bias test.

MAVRIC Flutter Model Transonic Limit Cycle Oscillation Test

NASA Technical Reports Server (NTRS)

Edwards, John W.; Schuster, David M.; Spain, Charles V.; Keller, Donald F.; Moses, Robert W.

2001-01-01

The Models for Aeroelastic Validation Research Involving Computation semi-span wind-tunnel model (MAVRIC-I), a business jet wing-fuselage flutter model, was tested in NASA Langley's Transonic Dynamics Tunnel with the goal of obtaining experimental data suitable for Computational Aeroelasticity code validation at transonic separation onset conditions. This research model is notable for its inexpensive construction and instrumentation installation procedures. Unsteady pressures and wing responses were obtained for three wingtip configurations of clean, tipstore, and winglet. Traditional flutter boundaries were measured over the range of M = 0.6 to 0.9 and maps of Limit Cycle Oscillation (LCO) behavior were made in the range of M = 0.85 to 0.95. Effects of dynamic pressure and angle-of-attack were measured. Testing in both R134a heavy gas and air provided unique data on Reynolds number, transition effects, and the effect of speed of sound on LCO behavior. The data set provides excellent code validation test cases for the important class of flow conditions involving shock-induced transonic flow separation onset at low wing angles, including LCO behavior.

Tensile and compressive modulus of elasticity of pultruded fiber-reinforced polymer composite materials

NASA Astrophysics Data System (ADS)

Lee, J. H.; Kim, S. H.; Park, J. K.; Choi, W. C.; Yoon, S. J.

2018-06-01

Many researches focused on the mechanical properties of steel and concrete have been carried out for applications in the construction industry. However, in order to clarify the mechanical properties of pultruded fiber-reinforced polymer (PFRP) structural members for construction, testing is needed. Deriving the mechanical properties of PFRP structural members through testing is difficult, however, because some members cannot be tested easily due to their cross-section dimensions. This paper reports a part of studies that attempt to present conservative results in the case of members that cannot be tested reasonably. The authors obtained and compared experimental and theoretical modulus of elasticity values. If the mechanical properties of PFRP members can be predicted using reasonable and conservative values, then the structure can be designed economically and safely even in the early design stages. To this end, this paper proposes a strain energy approach as a conservative and convenient way to predict the mechanical properties of PFRP structural members. The strain energy data obtained can be used to predict the mechanical properties of PFRP members in the construction field.

MAVRIC Flutter Model Transonic Limit Cycle Oscillation Test

NASA Technical Reports Server (NTRS)

Edwards, John W.; Schuster, David M.; Spain, Charles V.; Keller, Donald F.; Moses, Robert W.

2001-01-01

The Models for Aeroelastic Validation Research Involving Computation semi-span wind-tunnel model (MAVRIC-I), a business jet wing-fuselage flutter model, was tested in NASA Langley's Transonic Dynamics Tunnel with the goal of obtaining experimental data suitable for Computational Aeroelasticity code validation at transonic separation onset conditions. This research model is notable for its inexpensive construction and instrumentation installation procedures. Unsteady pressures and wing responses were obtained for three wingtip configurations clean, tipstore, and winglet. Traditional flutter boundaries were measured over the range of M = 0.6 to 0.9 and maps of Limit Cycle Oscillation (LCO) behavior were made in the range of M = 0.85 to 0.95. Effects of dynamic pressure and angle-of-attack were measured. Testing in both R134a heavy gas and air provided unique data on Reynolds number, transition effects, and the effect of speed of sound on LCO behavior. The data set provides excellent code validation test cases for the important class of flow conditions involving shock-induced transonic flow separation onset at low wing angles, including Limit Cycle Oscillation behavior.

Degradation analysis in the estimation of photometric redshifts from non-representative training sets

NASA Astrophysics Data System (ADS)

Rivera, J. D.; Moraes, B.; Merson, A. I.; Jouvel, S.; Abdalla, F. B.; Abdalla, M. C. B.

2018-07-01

We perform an analysis of photometric redshifts estimated by using a non-representative training sets in magnitude space. We use the ANNz2 and GPz algorithms to estimate the photometric redshift both in simulations and in real data from the Sloan Digital Sky Survey (DR12). We show that for the representative case, the results obtained by using both algorithms have the same quality, using either magnitudes or colours as input. In order to reduce the errors when estimating the redshifts with a non-representative training set, we perform the training in colour space. We estimate the quality of our results by using a mock catalogue which is split samples cuts in the r band between 19.4 < r < 20.8. We obtain slightly better results with GPz on single point z-phot estimates in the complete training set case, however the photometric redshifts estimated with ANNz2 algorithm allows us to obtain mildly better results in deeper r-band cuts when estimating the full redshift distribution of the sample in the incomplete training set case. By using a cumulative distribution function and a Monte Carlo process, we manage to define a photometric estimator which fits well the spectroscopic distribution of galaxies in the mock testing set, but with a larger scatter. To complete this work, we perform an analysis of the impact on the detection of clusters via density of galaxies in a field by using the photometric redshifts obtained with a non-representative training set.

Degradation analysis in the estimation of photometric redshifts from non-representative training sets

NASA Astrophysics Data System (ADS)

Rivera, J. D.; Moraes, B.; Merson, A. I.; Jouvel, S.; Abdalla, F. B.; Abdalla, M. C. B.

2018-04-01

We perform an analysis of photometric redshifts estimated by using a non-representative training sets in magnitude space. We use the ANNz2 and GPz algorithms to estimate the photometric redshift both in simulations as well as in real data from the Sloan Digital Sky Survey (DR12). We show that for the representative case, the results obtained by using both algorithms have the same quality, either using magnitudes or colours as input. In order to reduce the errors when estimating the redshifts with a non-representative training set, we perform the training in colour space. We estimate the quality of our results by using a mock catalogue which is split samples cuts in the r-band between 19.4 < r < 20.8. We obtain slightly better results with GPz on single point z-phot estimates in the complete training set case, however the photometric redshifts estimated with ANNz2 algorithm allows us to obtain mildly better results in deeper r-band cuts when estimating the full redshift distribution of the sample in the incomplete training set case. By using a cumulative distribution function and a Monte-Carlo process, we manage to define a photometric estimator which fits well the spectroscopic distribution of galaxies in the mock testing set, but with a larger scatter. To complete this work, we perform an analysis of the impact on the detection of clusters via density of galaxies in a field by using the photometric redshifts obtained with a non-representative training set.

Molecular epidemiology of human cases of tuberculosis by Mycobacterium bovis in Mexico.

PubMed

Milián-Suazo, Feliciano; Pérez-Guerrero, Laura; Arriaga-Díaz, Camila; Escartín-Chávez, Minerva

2010-10-01

The purpose of this study was to evaluate the role of Mycobacterium bovis in human cases of tuberculosis (TB) in an endemic area of the disease in cattle. Sputum, urine and other tissue samples were obtained from: (1) TB-symptomatic patients, (2) dairy farm workers and (3) abattoir workers. Samples of macroscopic lesions suspicious of TB were also obtained from cattle at slaughter in the same geographic area. A total of 562 human samples were collected: 255 from symptomatic patients, 218 from farm workers and 93 from abattoir workers. Samples were analysed by the bacillus acido-alcohol resitant (BAAR) and polymerase chain reaction (PCR) tests and cultured in Stonebrink and Löwenstein-Jensen. Spoligotyping was performed in all isolates obtained by culture and the DNA obtained by PCR. From the total number of human cases, 34 (6%) showed M. bovis spoligotype; eight spoligotypes from cattle showed an identical pattern to three spoligotypes from humans; a different set of spoligotypes from cattle (n = 8) had only one spacer difference to a set of spoligotypes from humans (n = 2). These results provide further evidence that infected cattle represent a risk to public health and support previous reports about the role of M. bovis in Mexican patients. There is no doubt that genotyping M. bovis isolates collected from cattle may have a substantial impact on our understanding of the epidemiology of TB. Copyright © 2010 Elsevier B.V. All rights reserved.

Piloting case-based instruction in a didactic clinical immunology course.

PubMed

Hoag, Kathleen; Lillie, Janet; Hoppe, Ruth

2005-01-01

To assess (1) the effect of case-based instructional modules on student critical thinking, class attendance, and satisfaction and (2) student opinion of case formats. University-based upper division course in clinical immunology and serology. The course was taught by the same instructor for two consecutive semesters with the intervention introduced in the second semester. Sixty-seven students experienced the intervention and 56 students were in the baseline cohort. Nine cases were interspersed between lectures during the semester. Each case took one 50-minute class in which students worked in groups of five or six. Student performance on five critical thinking multiple-choice examination questions and percent student attendance on case days versus lecture days were analyzed using the Mann-Whitney test. Student ratings on course evaluations were analyzed using t-test comparing semesters with and without intervention. Student opinion of cases was obtained through surveys and a focus group. Student performance on critical thinking exam questions was similar in the two groups. Student attendance was significantly higher on case days (95.6%) versus lecture days (80.3%; p < 0.0001). Only composite ratings for instructor involvement, student-instructor interaction, and course organization were significantly improved in the semester with cases compared to the semester with lecture only (p < 0.0001 for all indices). Although case studies did not significantly improve student performance on critical thinking questions, they still proved to be a valuable instructional method. Student attendance, student-instructor interaction, and instructor involvement in the course were all positively affected by incorporation of case studies. Discussion of cases also helped to uncover student misconceptions of course material.

Ground-water resources of Kleberg County, Texas

USGS Publications Warehouse

Livingston, Penn Poore; Bridges, Thomas W.

1936-01-01

Water obtained from the fresh-water horizon is comparatively fresh in the western and central parts of the county but contains a somewhat higher proportion of chlorides toward the Gulf. Samples obtained from about 100 wells, located for the most part in the central part of the county, showed a. higher chloride content than is normal for the freshwater beds in the area. These wells are believed in large part to be defective and to be admitting salt water. This was demonstrated and the leaks located in several wells that were tested. No evidence was found of salt-water contamination by percolation through the formations, however. The leaky wells should be repaired, If practicable, or sealed to prevent them from contaminating the fresh-water sand. The chances of leaks developing can be largely eliminated If the wells are properly drilled and provided with casing of good grade, and the casing is adequately seated.

Analytical investigation of the dynamics of tethered constellations in Earth orbit, phase 2

NASA Technical Reports Server (NTRS)

Lorenzini, Enrico C.

1987-01-01

A control law was developed to control the elevator during short-distance maneuvers along the tether of a 4-mass tethered system. This control law (called retarded exponential or RE) was analyzed parametrically in order to assess which control parameters provide a good dynamic response and a smooth time history of the acceleration on board the elevator. The short-distance maneuver under investigation consists of a slow crawling of the elevator over the distance of 10 m that represents a typical maneuver for fine tuning the acceleration level on board the elevator. The contribution of aerodynamic and thermal perturbations upon acceleration levels was also evaluated and acceleration levels obtained when such pertubations are taken into account were compared to those obtained by neglecting the thermal and aerodynamic forces. In addition, the preparation of a tether simulation questionnaire is illustrated. Analytic solutions to be compared to numerical cases and simulator test cases are also discussed.

The study of topics of Astronomy in Physics teaching that addresses the significant learning

NASA Astrophysics Data System (ADS)

Santos Neta, M. L.; Voelzke, M. R.

2017-12-01

In this work are discussed the results of the case study on the oceanic tides for which it was used didactic sequences, based on the Cycle of Experience of George Kelly (Kelly 1963), applied in four groups of the first year of the integral medium teaching. The data obtained in two same tests - Pre and Post-Test - before and after the application of the didactic sequences, as well as the verification of the significant learning analysed as for the conditions of the previous knowledge considering authors Boczko (1984), Horvath (2008) and Kepler & Saraiva (2013). Also the values were analysed obtained the Post-Test II applied to the long period. The results reveal that the worked groups presented previous knowledge in conditions adapted for the understanding of the event, as well as, for they be used in the situation-problem resolution that demands the understanding. Verify also that the idea of the didactic sequence can be used as tool in the relationship teaching-learning addressed to the significant learning.

Raman spectroscopic studies on bacteria

NASA Astrophysics Data System (ADS)

Maquelin, Kees; Choo-Smith, Lin-P'ing; Endtz, Hubert P.; Bruining, Hajo A.; Puppels, Gerwin J.

2000-11-01

Routine clinical microbiological identification of pathogenic micro-organisms is largely based on nutritional and biochemical tests. Laboratory results can be presented to a clinician after 2 - 3 days for most clinically relevant micro- organisms. Most of this time is required to obtain pure cultures and enough biomass for the tests to be performed. In the case of severely ill patients, this unavoidable time delay associated with such identification procedures can be fatal. A novel identification method based on confocal Raman microspectroscopy will be presented. With this method it is possible to obtain Raman spectra directly from microbial microcolonies on the solid culture medium, which have developed after only 6 hours of culturing for most commonly encountered organisms. Not only does this technique enable rapid (same day) identifications, but also preserves the sample allowing it to be double-checked with traditional tests. This, combined with the speed and minimal sample handling indicate that confocal Raman microspectroscopy has much potential as a powerful new tool in clinical diagnostic microbiology.

Loss of heterozygosity on chromosome 9q22.3 in microdissected basal cell carcinomas around the Semipalatinsk Nuclear Testing Site, Kazakhstan.

PubMed

Iwata, Kenji; Takamura, Noboru; Nakashima, Masahiro; Alipov, Gabit; Mine, Mariko; Matsumoto, Naomichi; Yoshiura, Koichiro; Prouglo, Yuriy; Sekine, Ichiro; Katayama, Ichiro; Yamashita, Shunichi

2004-04-01

A high incidence of skin cancers has been noted around the Semipalatinsk Nuclear Testing Site (SNTS) in Kazakhstan. Recently, basal cell carcinoma (BCC) susceptibility genes, human homolog of the Drosophila pathed gene (PTCH), and the xeroderma pigmentosa group A-complementing gene (XPA), have been cloned and localized on chromosome 9q22.3. To clarify the effect of low-dose irradiation on the occurrence of BCC, we used microdissection and polymerase chain reaction to identify loss of heterozygosity (LOH) at 9q22.3 using BCC samples obtained from this region. Ten Japanese samples were analyzed as controls. LOH with at least 1 marker was identified in 5 of 14 cases from around SNTS, whereas only 1 case with 1 marker was identified among the 10 Nagasaki cases. The total number of LOH alleles from SNTS (8 of 45) was significantly higher than the number from Nagasaki (1 of 26) (P = 0.03). The higher incidence of LOH on 9q22.3 in BCC from around SNTS suggests involvement of chronic low-dose irradiation by fallout from the test site as a factor in the cancers.

Orbiting dynamic compression laboratory

NASA Technical Reports Server (NTRS)

Ahrens, T. J.; Vreeland, T., Jr.; Kasiraj, P.; Frisch, B.

1984-01-01

In order to examine the feasibility of carrying out dynamic compression experiments on a space station, the possibility of using explosive gun launchers is studied. The question of whether powders of a refractory metal (molybdenum) and a metallic glass could be well considered by dynamic compression is examined. In both cases extremely good bonds are obtained between grains of metal and metallic glass at 180 and 80 kb, respectively. When the oxide surface is reduced and the dynamic consolidation is carried out in vacuum, in the case of molybdenum, tensile tests of the recovered samples demonstrated beneficial ultimate tensile strengths.

Sequence variants in the autophagy gene IRGM and multiple other replicating loci contribute to Crohn disease susceptibility

PubMed Central

Parkes, Miles; Barrett, Jeffrey C; Prescott, Natalie; Tremelling, Mark; Anderson, Carl A; Fisher, Sheila A; Roberts, Roland G; Nimmo, Elaine R; Cummings, Fraser R; Soars, Dianne; Drummond, Hazel; Lees, Charlie W; Khawaja, Saud A; Bagnall, Richard; Burke, Denis A; Todhunter, Catherine E; Ahmad, Tariq; Onnie, Clive M; McArdle, Wendy; Strachan, David; Bethel, Graeme; Bryan, Claire; Deloukas, Panos; Forbes, Alastair; Sanderson, Jeremy; Jewell, Derek P; Satsangi, Jack; Mansfield, John C; Cardon, Lon; Mathew, Christopher G

2008-01-01

A genome-wide association scan in Crohn disease by the Wellcome Trust Case Control Consortium1 detected strong association at 6 novel loci. We tested 37 SNPs from these and other loci for association in an independent case control sample. Replication was obtained for the IRGM gene on chromosome 5q33.1 which induces autophagy (replication P = 6.6 × 10−4, combined P = 2.1 × 10−10), and for 9 other loci including NKX2-3 and gene deserts on chromosomes 1q and 5p13. PMID:17554261

A new method of passive modifications for partial frequency assignment of general structures

NASA Astrophysics Data System (ADS)

Belotti, Roberto; Ouyang, Huajiang; Richiedei, Dario

2018-01-01

The assignment of a subset of natural frequencies to vibrating systems can be conveniently achieved by means of suitable structural modifications. It has been observed that such an approach usually leads to the undesired change of the unassigned natural frequencies, which is a phenomenon known as frequency spill-over. Such an issue has been dealt with in the literature only in simple specific cases. In this paper, a new and general method is proposed that aims to assign a subset of natural frequencies with low spill-over. The optimal structural modifications are determined through a three-step procedure that considers both the prescribed eigenvalues and the feasibility constraints, assuring that the obtained solution is physically realizable. The proposed method is therefore applicable to very general vibrating systems, such as those obtained through the finite element method. The numerical difficulties that may occur as a result of employing the method are also carefully addressed. Finally, the capabilities of the method are validated in three test-cases in which both lumped and distributed parameters are modified to obtain the desired eigenvalues.

An optimized procedure for obtaining DNA from fired and unfired ammunition.

PubMed

Montpetit, Shawn; O'Donnell, Patrick

2015-07-01

Gun crimes are a significant problem facing law enforcement agencies. Traditional forensic examination of firearms involves comparisons of markings imparted to bullets and cartridge casings during the firing process. DNA testing of casings and cartridges may not be routinely done in crime laboratories due a variety of factors including the typically low amounts of DNA recovered. The San Diego Police Department (SDPD) Crime Laboratory conducted a study to optimize the collection and profiling of DNA from fired and unfired ammunition. The method was optimized to where interpretable DNA results were obtained for 26.1% of the total number of forensic casework evidence samples, and provided some insights into the level of secondary transfer that might be expected from this type of evidence. Briefly detailed are the results from the experimental study and the forensic casework analysis using the optimized process. Mixtures (samples having more DNA types than the loader's known genotype detected or visible at any marker) were obtained in 39.8% of research samples and the likely source of DNA mixtures is discussed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Prospector: A web-based tool for rapid acquisition of gold standard data for pathology research and image analysis

PubMed Central

Wright, Alexander I.; Magee, Derek R.; Quirke, Philip; Treanor, Darren E.

2015-01-01

Background: Obtaining ground truth for pathological images is essential for various experiments, especially for training and testing image analysis algorithms. However, obtaining pathologist input is often difficult, time consuming and expensive. This leads to algorithms being over-fitted to small datasets, and inappropriate validation, which causes poor performance on real world data. There is a great need to gather data from pathologists in a simple and efficient manner, in order to maximise the amount of data obtained. Methods: We present a lightweight, web-based HTML5 system for administering and participating in data collection experiments. The system is designed for rapid input with minimal effort, and can be accessed from anywhere in the world with a reliable internet connection. Results: We present two case studies that use the system to assess how limitations on fields of view affect pathologist agreement, and to what extent poorly stained slides affect judgement. In both cases, the system collects pathologist scores at a rate of less than two seconds per image. Conclusions: The system has multiple potential applications in pathology and other domains. PMID:26110089

Prospector: A web-based tool for rapid acquisition of gold standard data for pathology research and image analysis.

PubMed

Wright, Alexander I; Magee, Derek R; Quirke, Philip; Treanor, Darren E

2015-01-01

Obtaining ground truth for pathological images is essential for various experiments, especially for training and testing image analysis algorithms. However, obtaining pathologist input is often difficult, time consuming and expensive. This leads to algorithms being over-fitted to small datasets, and inappropriate validation, which causes poor performance on real world data. There is a great need to gather data from pathologists in a simple and efficient manner, in order to maximise the amount of data obtained. We present a lightweight, web-based HTML5 system for administering and participating in data collection experiments. The system is designed for rapid input with minimal effort, and can be accessed from anywhere in the world with a reliable internet connection. We present two case studies that use the system to assess how limitations on fields of view affect pathologist agreement, and to what extent poorly stained slides affect judgement. In both cases, the system collects pathologist scores at a rate of less than two seconds per image. The system has multiple potential applications in pathology and other domains.

Quality assessment of the TLS data in conservation of monuments

NASA Astrophysics Data System (ADS)

Markiewicz, Jakub S.; Zawieska, Dorota

2015-06-01

Laser scanning has been recently confirming its high potential in the field of acquiring 3D data for architectural and engineering objects. The objective of this paper is to analyse the quality of the TLS data acquired for different surfaces of monumental objects, with consideration of distances and the scanning angles. Tests concerning the quality of the survey data and shapes of architectural objects, characterised by diversified curvature, structure and the uniformity of the surface, were performed. The obtained results proved that utilisation of terrestrial laser scanning techniques does not allow to achieve expected accuracy for some historical surfaces and it should be substituted by alternative, photogrammetric techniques. Therefore, the typology of constructions of historical objects is important not only for selection of the optimum technique of surveys, but also for its appropriate utilisation. The test objects were architectural details of the Main Hall of the Warsaw University of Technology. Scans were acquired using the 5006h scanner. Diversified geometry of scans was tested, and the relations between the distance and obtained accuracy were specified. In the case of numerous conservational works the precise surface reconstruction is often important, in order to specify damages. Therefore, the repeatability of obtained TLS results for selected surfaces was also tested. Different surfaces were analysed, which are composed of different materials having glittery elements and inhomogeneous structure. The obtained results and performed analyses revealed the high imperfections of the TLS technique applied for measuring surfaces of historical objects. The presented accuracy of measurements of projection of historical surfaces, obtained using the TLS technique may be applied by art conservators, museum professionals, archaeologists and other specialists, to perform wide analyses of historical heritage objects.

[Confirming the Utility of RAISUS Antifungal Susceptibility Testing by New-Software].

PubMed

Ono, Tomoko; Suematsu, Hiroyuki; Sawamura, Haruki; Yamagishi, Yuka; Mikamo, Hiroshige

2017-08-15

Clinical and Laboratory Standards Institute (CLSI) methods for susceptibility tests of yeast are used in Japan. On the other hand, the methods have some disadvantage; 1) reading at 24 and 48 h, 2) using unclear scale, approximately 50% inhibition, to determine MICs, 3) calculating trailing growth and paradoxical effects. These makes it difficult to test the susuceptibility for yeasts. Old software of RAISUS, Ver. 6.0 series, resolved problem 1) and 2) but did not resolve problem 3). Recently, new software of RAISUS, Ver. 7.0 series, resolved problem 3). We confirmed that using the new software made it clear whether all these issue were settled or not. Eighty-four Candida isolated from Aichi Medical University was used in this study. We compared the MICs obtained by using RAISUS antifungal susceptibility testing of yeasts RSMY1, RSMY1, with those obtained by using ASTY. The concordance rates (±four-fold of MICs) between the MICs obtained by using ASTY and RSMY1 with the new software were more than 90%, except for miconazole (MCZ). The rate of MCZ was low, but MICs obtained by using CLSI methods and Yeast-like Fungus DP 'EIKEN' methods, E-DP, showed equivalent MICs of RSMY1 using the new software. The frequency of skip effects on RSMY1 using the new software markedly decreased relative to RSMY1 using the old software. In case of showing trailing growth, the new software of RAISUS made it possible to choice the correct MICs and to put up the sign of trailing growth on the result screen. New software of RAISUS enhances its usability and the accuracy of MICs. Using automatic instrument to determine MICs is useful to obtain objective results easily.

Intraoperative leak testing has no correlation with leak after laparoscopic sleeve gastrectomy.

PubMed

Sethi, Monica; Zagzag, Jonathan; Patel, Karan; Magrath, Melissa; Somoza, Eduardo; Parikh, Manish S; Saunders, John K; Ude-Welcome, Aku; Schwack, Bradley F; Kurian, Marina S; Fielding, George A; Ren-Fielding, Christine J

2016-03-01

Staple line leak is a serious complication of sleeve gastrectomy. Intraoperative methylene blue and air leak tests are routinely used to evaluate for leak; however, the utility of these tests is controversial. We hypothesize that the practice of routine intraoperative leak testing is unnecessary during sleeve gastrectomy. A retrospective cohort study was designed using a prospectively collected database of seven bariatric surgeons from two institutions. All patients who underwent sleeve gastrectomy from March 2012 to November 2014 were included. The performance of intraoperative leak testing and the type of test (air or methylene blue) were based on surgeon preference. Data obtained included BMI, demographics, comorbidity, presence of intraoperative leak test, result of test, and type of test. The primary outcome was leak rate between the leak test (LT) and no leak test (NLT) groups. SAS version 9.4 was used for univariate and multivariate analyses. A total of 1550 sleeve gastrectomies were included; most were laparoscopic (99.8%), except for one converted and two open cases. Routine intraoperative leak tests were performed in 1329 (85.7%) cases, while 221 (14.3%) did not have LTs. Of the 1329 cases with LTs, there were no positive intraoperative results. Fifteen (1%) patients developed leaks, with no difference in leak rate between the LT and NLT groups (1 vs. 1%, p = 0.999). After adjusting for baseline differences between the groups with a propensity analysis, the observed lack of association between leak and intraoperative leak test remained. In this cohort, leaks presented at a mean of 17.3 days postoperatively (range 1-67 days). Two patients with staple line leaks underwent repeat intraoperative leak testing at leak presentation, and the tests remained negative. Intraoperative leak testing has no correlation with leak due to laparoscopic sleeve gastrectomy and is not predictive of the later development of staple line leak.

Validation of Shock Layer Radiation: Perspectives for Test Cases

NASA Technical Reports Server (NTRS)

Brandis, Aaron

2012-01-01

This paper presents a review of the analysis and measurement of radiation data obtained in the NASA Ames Research Center's Electric Arc Shock Tube (EAST) facility. The goal of these experiments was to measure the level of radiation encountered during atmospheric entry. The data obtained from these experiments is highlighted by providing the first spectrally and spatially resolved data for high speed Earth entry and measurements of the CO 4th positive band for conditions relevant to Mars entry. Comparisons of the EAST data with experimental results obtained from shock tunnels at JAXA and the University of Queensland are presented. Furthermore, the paper will detail initial analyses in to the influence and characterization of the measure non-equilibrium radiation.

Practical Formal Verification of Diagnosability of Large Models via Symbolic Model Checking

NASA Technical Reports Server (NTRS)

Cavada, Roberto; Pecheur, Charles

2003-01-01

This document reports on the activities carried out during a four-week visit of Roberto Cavada at the NASA Ames Research Center. The main goal was to test the practical applicability of the framework proposed, where a diagnosability problem is reduced to a Symbolic Model Checking problem. Section 2 contains a brief explanation of major techniques currently used in Symbolic Model Checking, and how these techniques can be tuned in order to obtain good performances when using Model Checking tools. Diagnosability is performed on large and structured models of real plants. Section 3 describes how these plants are modeled, and how models can be simplified to improve the performance of Symbolic Model Checkers. Section 4 reports scalability results. Three test cases are briefly presented, and several parameters and techniques have been applied on those test cases in order to produce comparison tables. Furthermore, comparison between several Model Checkers is reported. Section 5 summarizes the application of diagnosability verification to a real application. Several properties have been tested, and results have been highlighted. Finally, section 6 draws some conclusions, and outlines future lines of research.

Geophysical Assessment of Groundwater Potential: A Case Study from Mian Channu Area, Pakistan.

PubMed

Hasan, Muhammad; Shang, Yanjun; Akhter, Gulraiz; Jin, Weijun

2017-11-17

An integrated study using geophysical method in combination with pumping tests and geochemical method was carried out to delineate groundwater potential zones in Mian Channu area of Pakistan. Vertical electrical soundings (VES) using Schlumberger configuration with maximum current electrode spacing (AB/2 = 200 m) were conducted at 50 stations and 10 pumping tests at borehole sites were performed in close proximity to 10 of the VES stations. The aim of this study is to establish a correlation between the hydraulic parameters obtained from geophysical method and pumping tests so that the aquifer potential can be estimated from the geoelectrical surface measurements where no pumping tests exist. The aquifer parameters, namely, transmissivity and hydraulic conductivity were estimated from Dar Zarrouyk parameters by interpreting the layer parameters such as true resistivities and thicknesses. Geoelectrical succession of five-layer strata (i.e., topsoil, clay, clay sand, sand, and sand gravel) with sand as a dominant lithology was found in the study area. Physicochemical parameters interpreted by World Health Organization and Food and Agriculture Organization were well correlated with the aquifer parameters obtained by geoelectrical method and pumping tests. The aquifer potential zones identified by modeled resistivity, Dar Zarrouk parameters, pumped aquifer parameters, and physicochemical parameters reveal that sand and gravel sand with high values of transmissivity and hydraulic conductivity are highly promising water bearing layers in northwest of the study area. Strong correlation between estimated and pumped aquifer parameters suggest that, in case of sparse well data, geophysical technique is useful to estimate the hydraulic potential of the aquifer with varying lithology. © 2017, National Ground Water Association.

Detection of Mycobacterium bovis in formalin-fixed, paraffin-embedded tissues of cattle and elk by PCR amplification of an IS6110 sequence specific for Mycobacterium tuberculosis complex organisms.

PubMed

Miller, J; Jenny, A; Rhyan, J; Saari, D; Suarez, D

1997-07-01

A presumptive diagnosis of tuberculosis can be made if a tissue has characteristic histopathologic changes and acid-fast organisms. However, definitive diagnosis requires culture and species identification of the causative mycobacterium, a process that takes several weeks to complete. The purpose of work reported here was to determine if formalin-fixed, paraffin-embedded tissues could be tested by polymerase chain reaction (PCR) to provide a more rapid diagnosis of tuberculosis. Nondecalcified tissues from cases of tuberculosis in cattle and elk (Cervus elaphus) were examined. The primers used for PCR amplified a 123-bp fragment of IS6110, an insertion sequence that is specific for organisms in the Mycobacterium tuberculosis complex (M. tuberculosis, M. bovis, M. microti, M. africanum). The PCR test detected this sequence in tissues from 92 of 99 (93%) tuberculosis cases, including 3 of 4 elk. In 80 tissues, the positive results were obtained using material prepared by immersion of paraffin sections in water containing a detergent, followed by alternating boil/freeze cycles. The remaining positive results were obtained with DNA isolated from the crude tissue extracts by proteinase K digestion and phenol/chloroform purification. Accuracy of the IS6110 PCR test was demonstrated by negative test results on 31 tissues that had either nonmycobacterial granulomas or granulomatous lesions caused by other mycobacteria (M. paratuberculosis or M. avium). The findings of this study show that a PCR test usually can provide a rapid diagnosis of tuberculosis when it is applied to paraffin sections that have characteristic lesions and acid-fast organisms.

Value of the cumulative sum test for the assessment of a learning curve: Application to the introduction of patient-specific instrumentation for total knee arthroplasty in an academic department.

PubMed

De Gori, Marco; Adamczewski, Benjamin; Jenny, Jean-Yves

2017-06-01

The purpose of the study was to use the cumulative summation (CUSUM) test to assess the learning curve during the introduction of a new surgical technique (patient-specific instrumentation) in total knee arthroplasty (TKA) in an academic department. The first 50TKAs operated on at an academic department using patient-specific templates (PSTs) were scheduled to enter the study. All patients had a preoperative computed tomography scan evaluation to plan bone resections. The PSTs were positioned intraoperatively according to the best-fit technique and their three-dimensional orientation was recorded by a navigation system. The position of the femur and tibia PST was compared to the planned position for four items for each component: coronal and sagittal orientation, medial and lateral height of resection. Items were summarized to obtain knee, femur and tibia PST scores, respectively. These scores were plotted according to chronological order and included in a CUSUM analysis. The tested hypothesis was that the PST process for TKA was immediately under control after its introduction. CUSUM test showed that positioning of the PST significantly differed from the target throughout the study. There was a significant difference between all scores and the maximal score. No case obtained the maximal score of eight points. The study was interrupted after 20 cases because of this negative evaluation. The CUSUM test is effective in monitoring the learning curve when introducing a new surgical procedure. Introducing PST for TKA in an academic department may be associated with a long-lasting learning curve. The study was registered on the clinical.gov website (Identifier NCT02429245). Copyright © 2017 Elsevier B.V. All rights reserved.

Array of Hall Effect Sensors for Linear Positioning of a Magnet Independently of Its Strength Variation. A Case Study: Monitoring Milk Yield during Milking in Goats

PubMed Central

García-Diego, Fernando-Juan; Sánchez-Quinche, Angel; Merello, Paloma; Beltrán, Pedro; Peris, Cristófol

2013-01-01

In this study we propose an electronic system for linear positioning of a magnet independent of its modulus, which could vary because of aging, different fabrication process, etc. The system comprises a linear array of 24 Hall Effect sensors of proportional response. The data from all sensors are subject to a pretreatment (normalization) by row (position) making them independent on the temporary variation of its magnetic field strength. We analyze the particular case of the individual flow in milking of goats. The multiple regression analysis allowed us to calibrate the electronic system with a percentage of explanation R2 = 99.96%. In our case, the uncertainty in the linear position of the magnet is 0.51 mm that represents 0.019 L of goat milk. The test in farm compared the results obtained by direct reading of the volume with those obtained by the proposed electronic calibrated system, achieving a percentage of explanation of 99.05%. PMID:23793020

NEEDLE BIOPSY OF THE LIVER—General Considerations

PubMed Central

Molle, William E.; Kaplan, Leo

1952-01-01

Needle biopsy of the liver provides concrete diagnostic information that cannot be as readily obtained in any other way. This report reviews 401 liver biopsies in 312 patients. The major indications for use of this procedure are: To determine the cause of an obscure liver enlargement; to establish the cause of jaundice; to distinguish between malignant disease and cirrhosis of the liver; to determine when hepatitis has subsided; and to evaluate the results of treatment. At times, systemic disease that has not been recognized by other means may be diagnosed by this technique. There is risk in performing this test, and the 0.25 per cent mortality in this series compares favorably with that reported from other clinics. Where the diagnosis by biopsy could be compared with observations at operation or autopsy, the correct diagnosis was made by biopsy in 85 per cent of cases. Greater accuracy was obtained by two or more biopsic examinations in one case then by single biopsy. In several cases in which surgical operation was considered, biopsic information made it unnecessary, and vice versa. PMID:14886754

Design and Implementation of a Telecardiology System for Mobile Devices.

PubMed

Cinaglia, Pietro; Tradigo, Giuseppe; Guzzi, Pietro H; Veltri, Pierangelo

2015-09-01

This paper presents the design and implementation of a system for digital telecardiology on mobile devices called Remote Cardio Consultation (RCC). Using RCC may improve first intervention procedures in case of heart attack. In fact, it allows physicians to remotely consult ECG signals from a mobile device or smartphone by using a so-called app. The remote consultation is implemented by a server application collecting physician availability to answer upon client support requests. The app can be used by first intervention clinicians and allows reducing delays and decision errors in emergency interventions. Thus, best decision, certified and supported by cardiologists, can be obtained in case of heart attacks and first interventions even by base medical doctors able to produce and send an ECG. RCC tests have been performed, and the prototype is freely available as a service for testing.

Intelligent image capture of cartridge cases for firearms examiners

NASA Astrophysics Data System (ADS)

Jones, Brett C.; Guerci, Joseph R.

1997-02-01

The FBI's DRUGFIRETM system is a nationwide computerized networked image database of ballistic forensic evidence. This evidence includes images of cartridge cases and bullets obtained from both crime scenes and controlled test firings of seized weapons. Currently, the system is installed in over 80 forensic labs across the country and has enjoyed a high degree of success. In this paper, we discuss some of the issues and methods associated with providing a front-end semi-automated image capture system that simultaneously satisfies the often conflicting criteria of the many human examiners visual perception versus the criteria associated with optimizing autonomous digital image correlation. Specifically, we detail the proposed processing chain of an intelligent image capture system (IICS), involving a real- time capture 'assistant,' which assesses the quality of the image under test utilizing a custom designed neural network.

Space vehicle acoustics prediction improvement for payloads. [space shuttle

NASA Technical Reports Server (NTRS)

Dandridge, R. E.

1979-01-01

The modal analysis method was extensively modified for the prediction of space vehicle noise reduction in the shuttle payload enclosure, and this program was adapted to the IBM 360 computer. The predicted noise reduction levels for two test cases were compared with experimental results to determine the validity of the analytical model for predicting space vehicle payload noise environments in the 10 Hz one-third octave band regime. The prediction approach for the two test cases generally gave reasonable magnitudes and trends when compared with the measured noise reduction spectra. The discrepancies in the predictions could be corrected primarily by improved modeling of the vehicle structural walls and of the enclosed acoustic space to obtain a more accurate assessment of normal modes. Techniques for improving and expandng the noise prediction for a payload environment are also suggested.

Fan Noise Source Diagnostic Test Computation of Rotor Wake Turbulence Noise

NASA Technical Reports Server (NTRS)

Nallasamy, M.; Envia, E.; Thorp, S. A.; Shabbir, A.

2002-01-01

An important source mechanism of fan broadband noise is the interaction of rotor wake turbulence with the fan outlet guide vanes. A broadband noise model that utilizes computed rotor flow turbulence from a RANS code is used to predict fan broadband noise spectra. The noise model is employed to examine the broadband noise characteristics of the 22-inch Source Diagnostic Test fan rig for which broadband noise data were obtained in wind tunnel tests at the NASA Glenn Research Center. A 9-case matrix of three outlet guide vane configurations at three representative fan tip speeds are considered. For all cases inlet and exhaust acoustic power spectra are computed and compared with the measured spectra where possible. In general, the acoustic power levels and shape of the predicted spectra are in good agreement with the measured data. The predicted spectra show the experimentally observed trends with fan tip speed, vane count, and vane sweep. The results also demonstrate the validity of using CFD-based turbulence information for fan broadband noise calculations.

A transient laboratory method for determining the hydraulic properties of 'tight' rocks-II. Application

USGS Publications Warehouse

Neuzil, C.E.; Cooley, C.; Silliman, Stephen E.; Bredehoeft, J.D.; Hsieh, P.A.

1981-01-01

In Part I a general analytical solution for the transient pulse test was presented. Part II presents a graphical method for analyzing data from a test to obtain the hydraulic properties of the sample. The general solution depends on both hydraulic conductivity and specific storage and, in theory, analysis of the data can provide values for both of these hydraulic properties. However, in practice, one of two limiting cases may apply in which case it is possible to calculate only hydraulic conductivity or the product of hydraulic conductivity times specific storage. In this paper we examine the conditions when both hydraulic parameters can be calculated. The analyses of data from two tests are presented. In Appendix I the general solution presented in Part I is compared with an earlier analysis, in which compressive storage in the sample is assumed negligible, and the error in calculated hydraulic conductivity due to this simplifying assumption is examined. ?? 1981.

The drag of Zeppelin airships

NASA Technical Reports Server (NTRS)

Munk, Max M

1923-01-01

This report is a discussion of the results of tests with Zeppelin airships, in which the propellers were stopped as quickly as possible while the airship was in full flight. In this paper the author refers to the theory involved in these tests and calls attention to one scientifically interesting fact which can be derived from the tests and which has not yet been noted. The most important question concerning the tests is, of course: does the negative acceleration of an airship with stopped propellers supply proper data for determining the drag of the airship when in uniform flight? This can not be absolutely answered, however, except that in this particular case the agreement is sufficient and that the data obtained from the test are the true quantities, or, at least, the approximate quantities wanted.

Laboratory confirmation of measles in elimination settings: experience from the Republic of the Marshall Islands, 2003

PubMed Central

Nandy, Robin; Hickman, Carole J; Langidrik, Justina R; Strebel, Peter M; Papania, Mark J; Seward, Jane F; Bellini, William J

2009-01-01

Abstract Objective To highlight the complications involved in interpreting laboratory tests of measles immunoglobulin M (IgM) for confirmation of infection during a measles outbreak in a highly vaccinated population after conducting a mass immunization campaign as a control measure. Methods This case study was undertaken in the Republic of the Marshall Islands during a measles outbreak in 2003, when response immunization was conducted. A measles case was defined as fever and rash and one or more of cough, coryza or conjunctivitis. Between 13 July and 7 November 2003, serum samples were obtained from suspected measles cases for serologic testing and nasopharyngeal swabs were taken for viral isolation by reverse transcriptase polymerase chain reaction (RT–PCR). Findings Specimens were collected from 201 suspected measles cases (19% of total): of the ones that satisfied the clinical case definition, 45% were IgM positive (IgM+) and, of these, 24% had received measles vaccination within the previous 45 days (up to 45 days after vaccination an IgM+ result could be due to either vaccination or wild-type measles infection). The proportion of IgM+ results varied with clinical presentation, the timing of specimen collection and vaccination status. Positive results on RT–PCR occurred in specimens from eight IgM-negative and four IgM+ individuals who had recently been vaccinated. Conclusion During measles outbreaks, limiting IgM testing to individuals who meet the clinical case definition and have not been recently vaccinated allows for measles to be confirmed while conserving resources. PMID:19274360

Determination of power system component parameters using nonlinear dead beat estimation method

NASA Astrophysics Data System (ADS)

Kolluru, Lakshmi

Power systems are considered the most complex man-made wonders in existence today. In order to effectively supply the ever increasing demands of the consumers, power systems are required to remain stable at all times. Stability and monitoring of these complex systems are achieved by strategically placed computerized control centers. State and parameter estimation is an integral part of these facilities, as they deal with identifying the unknown states and/or parameters of the systems. Advancements in measurement technologies and the introduction of phasor measurement units (PMU) provide detailed and dynamic information of all measurements. Accurate availability of dynamic measurements provides engineers the opportunity to expand and explore various possibilities in power system dynamic analysis/control. This thesis discusses the development of a parameter determination algorithm for nonlinear power systems, using dynamic data obtained from local measurements. The proposed algorithm was developed by observing the dead beat estimator used in state space estimation of linear systems. The dead beat estimator is considered to be very effective as it is capable of obtaining the required results in a fixed number of steps. The number of steps required is related to the order of the system and the number of parameters to be estimated. The proposed algorithm uses the idea of dead beat estimator and nonlinear finite difference methods to create an algorithm which is user friendly and can determine the parameters fairly accurately and effectively. The proposed algorithm is based on a deterministic approach, which uses dynamic data and mathematical models of power system components to determine the unknown parameters. The effectiveness of the algorithm is tested by implementing it to identify the unknown parameters of a synchronous machine. MATLAB environment is used to create three test cases for dynamic analysis of the system with assumed known parameters. Faults are introduced in the virtual test systems and the dynamic data obtained in each case is analyzed and recorded. Ideally, actual measurements are to be provided to the algorithm. As the measurements are not readily available the data obtained from simulations is fed into the determination algorithm as inputs. The obtained results are then compared to the original (or assumed) values of the parameters. The results obtained suggest that the algorithm is able to determine the parameters of a synchronous machine when crisp data is available.

Increasing HIV testing among African immigrants in ireland: challenges and opportunities.

PubMed

Adedimeji, Adebola A; Asibon, Aba; O'Connor, Gerard; Carson, Richard; Cowan, Ethan; McKinley, Philip; Leider, Jason; Mallon, Patrick; Calderon, Yvette

2015-02-01

In 2012, immigrants constitute 63% of new cases of heterosexually transmitted HIV among individuals born outside Ireland. Current strategies to encourage testing can be ineffective if immigrants perceive them as culturally insensitive. We obtained qualitative data to explore challenges to voluntary HIV-testing for immigrants in Ireland. Content analysis was undertaken to identify and describe pertinent themes. Widespread beliefs that HIV is primarily a disease of African immigrants were identified as challenges that constrain access to testing and care. The organization and location of testing services, attitude of health workers, and beliefs regarding mandatory HIV-testing for immigrants seeking access to welfare benefits were also identified. Immigrants in Ireland encounter a variety of structural, cultural and personal constraints to HIV testing. Opportunities exist in the Irish Health system to increase testing among immigrants through greater acknowledgement of cultural sensitivities of immigrant groups.

Trading Up: Chimpanzees (Pan troglodytes) Show Self-Control Through Their Exchange Behavior

PubMed Central

Beran, Michael J.; Rossettie, Mattea S.; Parrish, Audrey E.

2015-01-01

Self-control is defined as the ability or capacity to obtain an objectively more valuable outcome rather than an objectively less valuable outcome though tolerating a longer delay or a greater effort requirement (or both) in obtaining that more valuable outcome. A number of tests have been devised to assess self-control in nonhuman animals, including exchange tasks. In this study, three chimpanzees (Pan troglodytes) participated in a delay of gratification task that required food exchange as the behavioral response that reflected self-control. The chimpanzees were offered opportunities to inhibit eating and instead exchange a currently possessed food item for a different (and sometimes better) item, often needing to exchange several food items before obtaining the highest-valued reward. We manipulated reward type, reward size, reward visibility, delay to exchange, and location of the highest-valued reward in the sequence of exchange events to compare performance within the same individuals. The chimpanzees successfully traded until obtaining the best item in most cases, although there were individual differences among participants in some variations of the test. These results support the idea that self-control is robust in chimpanzees even in contexts in which they perhaps anticipate future rewards and sustain delay of gratification until they can obtain the ultimately most-valuable item. PMID:26325355

Trading up: chimpanzees (Pan troglodytes) show self-control through their exchange behavior.

PubMed

Beran, Michael J; Rossettie, Mattea S; Parrish, Audrey E

2016-01-01

Self-control is defined as the ability or capacity to obtain an objectively more valuable outcome rather than an objectively less valuable outcome though tolerating a longer delay or a greater effort requirement (or both) in obtaining that more valuable outcome. A number of tests have been devised to assess self-control in non-human animals, including exchange tasks. In this study, three chimpanzees (Pan troglodytes) participated in a delay of gratification task that required food exchange as the behavioral response that reflected self-control. The chimpanzees were offered opportunities to inhibit eating and instead exchange a currently possessed food item for a different (and sometimes better) item, often needing to exchange several food items before obtaining the highest valued reward. We manipulated reward type, reward size, reward visibility, delay to exchange, and location of the highest valued reward in the sequence of exchange events to compare performance within the same individuals. The chimpanzees successfully traded until obtaining the best item in most cases, although there were individual differences among participants in some variations of the test. These results support the idea that self-control is robust in chimpanzees even in contexts in which they perhaps anticipate future rewards and sustain delay of gratification until they can obtain the ultimately most valuable item.

Medical microbiology: laboratory diagnosis of invasive pneumococcal disease.

PubMed

Werno, Anja M; Murdoch, David R

2008-03-15

The laboratory diagnosis of invasive pneumococcal disease (IPD) continues to rely on culture-based methods that have been used for many decades. The most significant recent developments have occurred with antigen detection assays, whereas the role of nucleic acid amplification tests has yet to be fully clarified. Despite developments in laboratory diagnostics, a microbiological diagnosis is still not made in most cases of IPD, particularly for pneumococcal pneumonia. The limitations of existing diagnostic tests impact the ability to obtain accurate IPD burden data and to assess the effectiveness of control measures, such as vaccination, in addition to the ability to diagnose IPD in individual patients. There is an urgent need for improved diagnostic tests for pneumococcal disease--especially tests that are suitable for use in underresourced countries.

[ETAP: A smoking scale for Primary Health Care].

PubMed

González Romero, Pilar María; Cuevas Fernández, Francisco Javier; Marcelino Rodríguez, Itahisa; Rodríguez Pérez, María Del Cristo; Cabrera de León, Antonio; Aguirre-Jaime, Armando

2016-05-01

To obtain a scale of tobacco exposure to address smoking cessation. Follow-up of a cohort. Scale validation. Primary Care Research Unit. Tenerife. A total of 6729 participants from the "CDC de Canarias" cohort. A scale was constructed under the assumption that the time of exposure to tobacco is the key factor to express accumulated risk. Discriminant validity was tested on prevalent cases of acute myocardial infarction (AMI; n=171), and its best cut-off for preventive screening was obtained. Its predictive validity was tested with incident cases of AMI (n=46), comparing the predictive power with markers (age, sex) and classic risk factors of AMI (hypertension, diabetes, dyslipidaemia), including the pack-years index (PYI). The scale obtained was the sum of three times the years that they had smoked plus years exposed to smoking at home and at work. The frequency of AMI increased with the values of the scale, with the value 20 years of exposure being the most appropriate cut-off for preventive action, as it provided adequate predictive values for incident AMI. The scale surpassed PYI in predicting AMI, and competed with the known markers and risk factors. The proposed scale allows a valid measurement of exposure to smoking and provides a useful and simple approach that can help promote a willingness to change, as well as prevention. It still needs to demonstrate its validity, taking as reference other problems associated with smoking. Copyright © 2015 Elsevier España, S.L.U. All rights reserved.

Quantifying entanglement of rotor chains using basis truncation: Application to dipolar endofullerene peapods.

PubMed

Halverson, Tom; Iouchtchenko, Dmitri; Roy, Pierre-Nicholas

2018-02-21

We propose a variational approach for the calculation of the quantum entanglement entropy of assemblies of rotating dipolar molecules. A basis truncation scheme based on the total angular momentum quantum number is proposed. The method is tested on hydrogen fluoride (HF) molecules confined in C 60 fullerene cages themselves trapped in a nanotube to form a carbon peapod. The rotational degrees of freedom of the HF molecules and dipolar interactions between neighboring molecules are considered in our model Hamiltonian. Both screened and unscreened dipoles are simulated and results are obtained for the ground state and one excited state that is expected to be accessible via a far-infrared collective excitation. The effect of basis truncation on energetic and entanglement properties is examined and discussed in terms of size extensivity. It is empirically found that for unscreened dipoles, a total angular momentum cutoff that increases linearly with the number of rotors is required in order to obtain proper system size scaling of the chemical potential and entanglement entropy. Recent experiments [A. Krachmalnicoff et al., Nat. Chem. 8, 953 (2016)] suggest substantial screening of the HF dipole moment, so much smaller basis sets are required to obtain converged results in this realistic case. Static correlation functions are also computed and are shown to decay much quicker in the case of screened dipoles. Our variational results are also used to test the accuracy of perturbative and pairwise ansatz treatments.

Surface immunoglobulins on blood lymphocytes of normal and immunodeficient persons studied by the mixed antiglobulin method

PubMed Central

Litwin, S. D.; Ochs, H.; Pollara, B.

1973-01-01

Surface immunoglobulins on human peripheral blood lymphocytes were investigated by the mixed antiglobulin technique—using the single layer mixed antiglobulin method as originally described (SLMA), and a modification employing a double layer of antibody (DLMA). Lymphocytes isolated from the blood of normal individuals had a mean of 7.8 and 18.4 per cent Ig + cells by the SLMA and DLMA techniques respectively. The DLMA data are similar to results obtained by other methods of detecting membrane Igs indicating that the mixed antiglobulin method is comparable in sensitivity. When the total numbers of Ig + cells, obtained by separate κ and λ testing, were compared with results obtained using single anti-light chain antisera, there was no significant difference, suggesting that most positive lymphocytes carry a single variety of light chain. Lymphocytes from the blood of seventeen patients with primary immunodeficiency were analysed. Four patients with variable immunodeficiency and four others with absent serum IgA all had normal surface Igs including α chains. All members of a family having an X-linked immunodeficiency had normal surface Igs including the affected members and a presumed carrier. Four cases of immunodeficiency associated with thymoma proved to have disparate findings. One patient exhibited a selective absence of μ antigens on the membranes of blood lymphocytes of over 2800 tested cells. Two other cases had normal surface Igs while a fourth patient, previously reported, lacked all surface Igs. PMID:4796276

Impression of multiple implants using photogrammetry: description of technique and case presentation.

PubMed

Peñarrocha-Oltra, David; Agustín-Panadero, Rubén; Bagán, Leticia; Giménez, Beatriz; Peñarrocha, María

2014-07-01

To describe a technique for registering the positions of multiple dental implants using a system based on photogrammetry. A case is presented in which a prosthetic treatment was performed using this technique. Three Euroteknika® dental implants were placed to rehabilitate a 55-year-old male patient with right posterior maxillary edentulism. Three months later, the positions of the implants were registered using a photogrammetry-based stereo-camera (PICcamera®). After processing patient and implant data, special abutments (PICabutment®) were screwed onto each implant. The PICcamera® was then used to capture images of the implant positions, automatically taking 150 images in less than 60 seconds. From this information a file was obtained describing the relative positions - angles and distances - of each implant in vector form. Information regarding the soft tissues was obtained from an alginate impression that was cast in plaster and scanned. A Cr-Co structure was obtained using CAD/CAM, and its passive fit was verified in the patient's mouth using the Sheffield test and the screw resistance test. Twelve months after loading, peri-implant tissues were healthy and no marginal bone loss was observed. The clinical application of this new system using photogrammetry to record the position of multiple dental implants facilitated the rehabilitation of a patient with posterior maxillary edentulism by means of a prosthesis with optimal fit. The prosthetic process was accurate, fast, simple to apply and comfortable for the patient.

Improvement of geomagnetic core field modeling with a priori information about Gauss coefficient correlations

NASA Astrophysics Data System (ADS)

Schachtschneider, R.; Rother, M.; Lesur, V.

2013-12-01

We introduce a method that enables us to account for existing correlations between Gauss coefficients in core field modelling. The information about the correlations are obtained from a highly accurate field model based on CHAMP data, e.g. the GRIMM-3 model. We compute the covariance matrices of the geomagnetic field, the secular variation, and acceleration up to degree 18 and use these in the regularization scheme of the core field inversion. For testing our method we followed two different approaches by applying it to two different synthetic satellite data sets. The first is a short data set with a time span of only three months. Here we test how the information about correlations help to obtain an accurate model when only very little information are available. The second data set is a large one covering several years. In this case, besides reducing the residuals in general, we focus on the improvement of the model near the boundaries of the data set where the accerelation is generally more difficult to handle. In both cases the obtained covariance matrices are included in the damping scheme of the regularization. That way information from scales that could otherwise not be resolved by the data can be extracted. We show that by using this technique we are able to improve the models of the field and the secular variation for both, the short and the long term data set, compared to approaches using more conventional regularization techniques.

Similar fecal immunochemical test results in screening and referral colorectal cancer

PubMed Central

van Turenhout, Sietze T; van Rossum, Leo GM; Oort, Frank A; Laheij, Robert JF; van Rijn, Anne F; Terhaar sive Droste, Jochim S; Fockens, Paul; van der Hulst, René WM; Bouman, Anneke A; Jansen, Jan BMJ; Meijer, Gerrit A; Dekker, Evelien; Mulder, Chris JJ

2012-01-01

AIM: To improve the interpretation of fecal immunochemical test (FIT) results in colorectal cancer (CRC) cases from screening and referral cohorts. METHODS: In this comparative observational study, two prospective cohorts of CRC cases were compared. The first cohort was obtained from 10 322 average risk subjects invited for CRC screening with FIT, of which, only subjects with a positive FIT were referred for colonoscopy. The second cohort was obtained from 3637 subjects scheduled for elective colonoscopy with a positive FIT result. The same FIT and positivity threshold (OC sensor; ≥ 50 ng/mL) was used in both cohorts. Colonoscopy was performed in all referral subjects and in FIT positive screening subjects. All CRC cases were selected from both cohorts. Outcome measurements were mean FIT results and FIT scores per tissue tumor stage (T stage). RESULTS: One hundred and eighteen patients with CRC were included in the present study: 28 cases obtained from the screening cohort (64% male; mean age 65 years, SD 6.5) and 90 cases obtained from the referral cohort (58% male; mean age 69 years, SD 9.8). The mean FIT results found were higher in the referral cohort (829 ± 302 ng/mL vs 613 ± 368 ng/mL, P = 0.02). Tissue tumor stage (T stage) distribution was different between both populations [screening population: 13 (46%) T1, eight (29%) T2, six (21%) T3, one (4%) T4 carcinoma; referral population: 12 (13%) T1, 22 (24%) T2, 52 (58%) T3, four (4%) T4 carcinoma], and higher T stage was significantly associated with higher FIT results (P < 0.001). Per tumor stage, no significant difference in mean FIT results was observed (screening vs referral: T1 498 ± 382 ng/mL vs 725 ± 374 ng/mL, P = 0.22; T2 787 ± 303 ng/mL vs 794 ± 341 ng/mL, P = 0.79; T3 563 ± 368 ng/mL vs 870 ± 258 ng/mL, P = 0.13; T4 not available). After correction for T stage in logistic regression analysis, no significant differences in mean FIT results were observed between both types of cohorts (P = 0.10). CONCLUSION: Differences in T stage distribution largely explain differences in FIT results between screening and referral cohorts. Therefore, FIT results should be reported according to T stage. PMID:23082056

Sensitivity and Specificity of an Operon Immunochromatographic Test in Serum and Whole-Blood Samples for the Diagnosis of Trypanosoma cruzi Infection in Spain, an Area of Nonendemicity

PubMed Central

Flores-Chavez, María; Cruz, Israel; Nieto, Javier; Gárate, Teresa; Navarro, Miriam; Pérez-Ayala, Ana; López-Vélez, Rogelio

2012-01-01

Trypanosoma cruzi infection is an imported parasitic disease in Spain, and the majority of infected individuals are in the chronic phase of the disease. This study evaluated the sensitivity and specificity of the Operon immunochromatographic test (ICT-Operon; Simple Stick Chagas and Simple Chagas WB [whole blood]; Operon S.A., Spain) for different biological samples. Well-characterized serum samples were obtained from chagasic patients (n = 63), nonchagasic individuals (n = 95), visceral leishmaniasis patients (n = 38), and malaria patients (n = 55). Noncharacterized specimens were obtained from Latin American immigrants and individuals at risk with a clinical and/or epidemiological background: these specimens were recovered serum or plasma samples (n = 450), whole peripheral blood (n = 94), and capillary blood (n = 282). The concordance of the results by enzyme-linked immunosorbent assay and indirect immunofluorescence test was considered to be the “gold standard” for diagnosis. Serum and plasma samples were analyzed by Stick Chagas, and whole blood was analyzed by Simple Chagas WB. The sensitivity and specificity of the ICT-Operon in well-characterized samples were 100% and 97.9%, respectively. No cross-reactivity was found with samples obtained from visceral leishmaniasis patients. In contrast, a false-positive result was obtained in 27.3% of samples from malaria patients. The sensitivities of the rapid test in noncharacterized serum or plasma, peripheral blood, and capillary blood samples were 100%, 92.1%, and 86.4%, respectively, while the specificities were 91.6%, 93.6%, and 95% in each case. ICT-Operon showed variable sensitivity, depending on the kind of sample, performing better when serum or plasma samples were used. It could therefore be used for serological screening combined with any other conventional test. PMID:22761296

An optical fiber bundle sensor for tip clearance and tip timing measurements in a turbine rig.

PubMed

García, Iker; Beloki, Josu; Zubia, Joseba; Aldabaldetreku, Gotzon; Illarramendi, María Asunción; Jiménez, Felipe

2013-06-05

When it comes to measuring blade-tip clearance or blade-tip timing in turbines, reflective intensity-modulated optical fiber sensors overcome several traditional limitations of capacitive, inductive or discharging probe sensors. This paper presents the signals and results corresponding to the third stage of a multistage turbine rig, obtained from a transonic wind-tunnel test. The probe is based on a trifurcated bundle of optical fibers that is mounted on the turbine casing. To eliminate the influence of light source intensity variations and blade surface reflectivity, the sensing principle is based on the quotient of the voltages obtained from the two receiving bundle legs. A discrepancy lower than 3% with respect to a commercial sensor was observed in tip clearance measurements. Regarding tip timing measurements, the travel wave spectrum was obtained, which provides the average vibration amplitude for all blades at a particular nodal diameter. With this approach, both blade-tip timing and tip clearance measurements can be carried out simultaneously. The results obtained on the test turbine rig demonstrate the suitability and reliability of the type of sensor used, and suggest the possibility of performing these measurements in real turbines under real working conditions.

An Optical Fiber Bundle Sensor for Tip Clearance and Tip Timing Measurements in a Turbine Rig

PubMed Central

García, Iker; Beloki, Josu; Zubia, Joseba; Aldabaldetreku, Gotzon; Illarramendi, María Asunción; Jiménez, Felipe

2013-01-01

When it comes to measuring blade-tip clearance or blade-tip timing in turbines, reflective intensity-modulated optical fiber sensors overcome several traditional limitations of capacitive, inductive or discharging probe sensors. This paper presents the signals and results corresponding to the third stage of a multistage turbine rig, obtained from a transonic wind-tunnel test. The probe is based on a trifurcated bundle of optical fibers that is mounted on the turbine casing. To eliminate the influence of light source intensity variations and blade surface reflectivity, the sensing principle is based on the quotient of the voltages obtained from the two receiving bundle legs. A discrepancy lower than 3% with respect to a commercial sensor was observed in tip clearance measurements. Regarding tip timing measurements, the travel wave spectrum was obtained, which provides the average vibration amplitude for all blades at a particular nodal diameter. With this approach, both blade-tip timing and tip clearance measurements can be carried out simultaneously. The results obtained on the test turbine rig demonstrate the suitability and reliability of the type of sensor used, and suggest the possibility of performing these measurements in real turbines under real working conditions. PMID:23739163

The Short- and Long-Term Effects of a Short Study Abroad Experience: The Case of Children

ERIC Educational Resources Information Center

Llanes, Angels

2012-01-01

This study examines to what extent L2 gains obtained during a study abroad (SA) experience are durable. Participants were 16 Catalan/Spanish bilingual children, learning English as an L2, who were distributed into two groups depending on their learning context (SA vs. at home [AH]). Participants completed a pre-test before the SA participants'…

Effect of Bearing Defects

DTIC Science & Technology

1974-12-01

defect types were tested at various levels: Comet- Tail, Dig-Nick, Dirt Brinell, Grind-Skip Lines, Impingement, Orange Peel , Pit, Scratch and "Liney...Shallow irregular indentation of surface. <.0015 max. dim. -(<.0008)*’ Otange Peel Pebbly appearance of raceway surface. Small ** Comet Tail Pit...scratch; dig-nick; impingement; grind-skip lines; and orange peel . The data obtained indicated that these defects in most cases, affected bearing

Source(s) of Syntactic Cross-Linguistic Influence (CLI): The Case of L3 Acquisition of English Possessives by Mazandarani-Persian Bilinguals

ERIC Educational Resources Information Center

Fallah, Nader; Jabbari, Ali Akbar; Fazilatfar, Ali Mohammad

2016-01-01

This study investigates the role of previously acquired linguistic systems, Mazandarani and Persian, in the acquisition of third language (L3) English at the initial stages. The data have been obtained from 31 students (age 13-14 years), testing the placement of attributive possessives in a grammaticality judgment task, an element rearrangement…

On the suitability of different representations of solid catalysts for combinatorial library design by genetic algorithms.

PubMed

Gobin, Oliver C; Schüth, Ferdi

2008-01-01

Genetic algorithms are widely used to solve and optimize combinatorial problems and are more often applied for library design in combinatorial chemistry. Because of their flexibility, however, their implementation can be challenging. In this study, the influence of the representation of solid catalysts on the performance of genetic algorithms was systematically investigated on the basis of a new, constrained, multiobjective, combinatorial test problem with properties common to problems in combinatorial materials science. Constraints were satisfied by penalty functions, repair algorithms, or special representations. The tests were performed using three state-of-the-art evolutionary multiobjective algorithms by performing 100 optimization runs for each algorithm and test case. Experimental data obtained during the optimization of a noble metal-free solid catalyst system active in the selective catalytic reduction of nitric oxide with propene was used to build up a predictive model to validate the results of the theoretical test problem. A significant influence of the representation on the optimization performance was observed. Binary encodings were found to be the preferred encoding in most of the cases, and depending on the experimental test unit, repair algorithms or penalty functions performed best.

Selected Parametric Effects on Materials Flammability Limits

NASA Technical Reports Server (NTRS)

Hirsch, David B.; Juarez, Alfredo; Peyton, Gary J.; Harper, Susana A.; Olson, Sandra L.

2011-01-01

NASA-STD-(I)-6001B Test 1 is currently used to evaluate the flammability of materials intended for use in habitable environments of U.S. spacecraft. The method is a pass/fail upward flame propagation test conducted in the worst case configuration, which is defined as a combination of a material s thickness, test pressure, oxygen concentration, and temperature that make the material most flammable. Although simple parametric effects may be intuitive (such as increasing oxygen concentrations resulting in increased flammability), combinations of multi-parameter effects could be more complex. In addition, there are a variety of material configurations used in spacecraft. Such configurations could include, for example, exposed free edges where fire propagation may be different when compared to configurations commonly employed in standard testing. Studies involving combined oxygen concentration, pressure, and temperature on flammability limits have been conducted and are summarized in this paper. Additional effects on flammability limits of a material s thickness, mode of ignition, burn-length criteria, and exposed edges are presented. The information obtained will allow proper selection of ground flammability test conditions, support further studies comparing flammability in 1-g with microgravity and reduced gravity environments, and contribute to persuasive scientific cases for rigorous space system fire risk assessments.

Some Static Oscillatory and Free Body Tests of Blunt Bodies at Low Subsonic Speeds

NASA Technical Reports Server (NTRS)

Lichtenstein, Jacob H.; Fisher, Lewis R.; Scher, Stanley H.; Lawrence, George F.

1959-01-01

Some blunt-body shapes considered suitable for entry into the earth's atmosphere were tested by both static and oscillatory methods in the Langley stability tunnel. In addition, free-fall tests of some similar models were made in the Langley 20-foot free-spinning tunnel. The results of the tests show that increasing the flare of the body shape increased the dynamic stability and that for flat-faced shapes increasing the corner radius increased the stability. The test data from the Langley stability tunnel were used to compute the damping factor for the models tested in the langley 20-foot free-spinning tunnel. For these cases in which the damping factor was low, -1/2 or less, the stability was critical and sensitive to disturbance. When the damping factor was about -2, damping was generally obtained.

Field testing of three bedload samplers' efficiency in a gravel-bed river, Spitsbergen

NASA Astrophysics Data System (ADS)

Rachlewicz, Grzegorz; Zwoliński, Zbigniew; Kociuba, Waldemar; Stawska, Monika

2017-06-01

A comparative study of the three bedload traps was accomplished to determine the effectiveness differences between the devices. The research was carried out in two transverse sections of the proglacial, gravel-bedded Scott River (SW Svalbard) using three devices to perform direct measurements of bedload transport in the river channels. Several samplers are used for field measurements, but none of them has gained widespread acceptance as a standard so far. The paper compares transport rates collected in three bedload samplers that differ in structure and functionality: i) a portable Helley-Smith, pressure-difference bedload sampler (H-S), ii) an anchored River Bedload Trap (RBT), and iii) the portable sampler used by the Polish Hydrological Services (PIHM type C). All three samplers are constructed using the same components: a frame made of thin stainless steel sheet and a nylon bag with the same (2 mm) mesh size (except PIHM). Measurements were conducted within three consecutive days in two cross sections, in the same vertical profiles and at the same time (at intervals of 30 and 60 min). Measurements of bedload transport and water velocity were performed simultaneously. In order to determine the effectiveness and representativeness of short-term measurements using particular devices, the masses of the samples were converted into a specific rate of bedload transport and compared to the results of long-term continuous measurement (24 h measurement cycle). The results confirm that both specific transport indicators and the mass of the samples collected by the tested devices show a significant variation. Generally, the highest mass and specific transport indicators were obtained using the H-S sampler. The RBT produced moderate transport rates, while the PIHM sampler gave the lowest rates. The bedload transport rate in a profile estimated on the short-term measurements was compared to results of the continuous measurements conducted in the same cross sections. In the 7 cases we obtained underestimation (to max. 10 times) and in the next 7 cases - overestimation (to max. 114 times). Only in four cases were the results of short-term measurements similar to the continuous ones. The results obtained from the RBT sampler show the smallest variability among all tested devices.

Tensile stress-strain behavior of graphite/epoxy laminates

NASA Technical Reports Server (NTRS)

Garber, D. P.

1982-01-01

The tensile stress-strain behavior of a variety of graphite/epoxy laminates was examined. Longitudinal and transverse specimens from eleven different layups were monotonically loaded in tension to failure. Ultimate strength, ultimate strain, and strss-strain curves wee obtained from four replicate tests in each case. Polynominal equations were fitted by the method of least squares to the stress-strain data to determine average curves. Values of Young's modulus and Poisson's ratio, derived from polynomial coefficients, were compared with laminate analysis results. While the polynomials appeared to accurately fit the stress-strain data in most cases, the use of polynomial coefficients to calculate elastic moduli appeared to be of questionable value in cases involving sharp changes in the slope of the stress-strain data or extensive scatter.

Serum and saliva magnesium in postmenopausal women with xerostomia.

PubMed

Agha-Hosseini, F; Mirzaii-Dizgah, I

2012-10-01

The aim of this study was to investigate serum, stimulated and unstimulated salivary magnesium in postmenopausal women with xerostomia. A case-control study was carried out on 60 selected postmenopausal women aged 41-77 years with or without xerostomia (30 as cases with xerostomia and 30 as controls without xerostomia), conducted at the Clinic of Oral Medicine, Tehran University of Medical Sciences. Unstimulated and paraffin-stimulated saliva samples were obtained by expectoration. Magnesium concentration was determined by the spectrophotometer method. Statistical analysis was carried out using Student's t-test. The mean serum concentration, but not stimulated and unstimulated whole saliva magnesium concentrations, was significantly higher in the cases than in the controls. Serum magnesium level appears to be associated with xerostomia in menopause.

Cryptic Hepatitis B and E in Patients With Acute Hepatitis of Unknown Etiology.

PubMed

Ganova-Raeva, Lilia; Punkova, Lili; Campo, David S; Dimitrova, Zoya; Skums, Pavel; Vu, Nga H; Dat, Do T; Dalton, Harry R; Khudyakov, Yury

2015-12-15

Up to 30% of acute viral hepatitis has no known etiology. To determine the disease etiology in patients with acute hepatitis of unknown etiology (HUE), serum specimens were obtained from 38 patients residing in the United Kingdom and Vietnam and from 26 healthy US blood donors. All specimens tested negative for known viral infections causing hepatitis, using commercially available serological and nucleic acid assays. Specimens were processed by sequence-independent complementary DNA amplification and next-generation sequencing (NGS). Sufficient material for individual NGS libraries was obtained from 12 HUE cases and 26 blood donors; the remaining HUE cases were sequenced as a pool. Read mapping was done by targeted and de novo assembly. Sequences from hepatitis B virus (HBV) were detected in 7 individuals with HUE (58.3%) and the pooled library, and hepatitis E virus (HEV) was detected in 2 individuals with HUE (16.7%) and the pooled library. Both HEV-positive cases were coinfected with HBV. HBV sequences belonged to genotypes A, D, or G, and HEV sequences belonged to genotype 3. No known hepatotropic viruses were detected in the tested normal human sera. NGS-based detection of HBV and HEV infections is more sensitive than using commercially available assays. HBV and HEV may be cryptically associated with HUE. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2015. This work is written by (a) US Government employee(s) and is in the public domain in the US.

FNA, core biopsy, or both for the diagnosis of lung carcinoma: Obtaining sufficient tissue for a specific diagnosis and molecular testing.

PubMed

Coley, Shana M; Crapanzano, John P; Saqi, Anjali

2015-05-01

Increasingly, minimally invasive procedures are performed to assess lung lesions and stage lung carcinomas. In cases of advanced-stage lung cancer, the biopsy may provide the only diagnostic tissue. The aim of this study was to determine which method-fine-needle aspiration (FNA), core biopsy (CBx), or both (B)--is optimal for providing sufficient tissue for rendering a specific diagnosis and pursuing molecular studies for guiding tumor-specific treatment. A search was performed for computed tomography-guided lung FNA, CBx, or B cases with rapid onsite evaluation. Carcinomas were assessed for the adequacy to render a specific diagnosis; this was defined as enough refinement to subtype a primary carcinoma or to assess a metastatic origin morphologically and/or immunohistochemically. In cases of primary lung adenocarcinoma, the capability of each modality to yield sufficient tissue for molecular studies (epidermal growth factor receptor, KRAS, or anaplastic lymphoma kinase) was also assessed. There were 210 cases, and 134 represented neoplasms, including 115 carcinomas. For carcinomas, a specific diagnosis was reached in 89% of FNA cases (33 of 37), 98% of CBx cases (43 of 44), and 100% of B cases (34 of 34). For primary lung adenocarcinomas, adequate tissue remained to perform molecular studies in 94% of FNA cases (16 of 17), 100% of CBx cases (19 of 19), and 86% of B cases (19 of 22). No statistical difference was found among the modalities for either reaching a specific diagnosis (p = .07, Fisher exact test) or providing sufficient tissue for molecular studies (p = .30, Fisher exact test). The results suggest that FNA, CBx, and B are comparable for arriving at a specific diagnosis and having sufficient tissue for molecular studies: they specifically attained the diagnostic and prognostic goals of minimally invasive procedures for lung carcinoma. © 2015 American Cancer Society.

Intraoperative Cochlear Implant Device Testing Utilizing an Automated Remote System: A Prospective Pilot Study.

PubMed

Lohmann, Amanda R; Carlson, Matthew L; Sladen, Douglas P

2018-03-01

Intraoperative cochlear implant device testing provides valuable information regarding device integrity, electrode position, and may assist with determining initial stimulation settings. Manual intraoperative device testing during cochlear implantation requires the time and expertise of a trained audiologist. The purpose of the current study is to investigate the feasibility of using automated remote intraoperative cochlear implant reverse telemetry testing as an alternative to standard testing. Prospective pilot study evaluating intraoperative remote automated impedance and Automatic Neural Response Telemetry (AutoNRT) testing in 34 consecutive cochlear implant surgeries using the Intraoperative Remote Assistant (Cochlear Nucleus CR120). In all cases, remote intraoperative device testing was performed by trained operating room staff. A comparison was made to the "gold standard" of manual testing by an experienced cochlear implant audiologist. Electrode position and absence of tip fold-over was confirmed using plain film x-ray. Automated remote reverse telemetry testing was successfully completed in all patients. Intraoperative x-ray demonstrated normal electrode position without tip fold-over. Average impedance values were significantly higher using standard testing versus CR120 remote testing (standard mean 10.7 kΩ, SD 1.2 vs. CR120 mean 7.5 kΩ, SD 0.7, p < 0.001). There was strong agreement between standard manual testing and remote automated testing with regard to the presence of open or short circuits along the array. There were, however, two cases in which standard testing identified an open circuit, when CR120 testing showed the circuit to be closed. Neural responses were successfully obtained in all patients using both systems. There was no difference in basal electrode responses (standard mean 195.0 μV, SD 14.10 vs. CR120 194.5 μV, SD 14.23; p = 0.7814); however, more favorable (lower μV amplitude) results were obtained with the remote automated system in the apical 10 electrodes (standard 185.4 μV, SD 11.69 vs. CR120 177.0 μV, SD 11.57; p value < 0.001). These preliminary data demonstrate that intraoperative cochlear implant device testing using a remote automated system is feasible. This system may be useful for cochlear implant programs with limited audiology support or for programs looking to streamline intraoperative device testing protocols. Future studies with larger patient enrollment are required to validate these promising, but preliminary, findings.

Modest rise in chlamydia and gonorrhoea testing did not increase case detection in a clinical HIV cohort in Ontario, Canada.

PubMed

Burchell, Ann N; Grewal, Ramandip; Allen, Vanessa G; Gardner, Sandra L; Moravan, Veronika; Bayoumi, Ahmed M; Kaul, Rupert; McGee, Frank; Millson, Margaret Peggy E; Remis, Robert S; Raboud, Janet; Mazzulli, Tony; Rourke, Sean B

2014-12-01

We described patterns of testing for chlamydia and gonorrhoea infection among persons in specialty HIV care in Ontario, Canada, from 2008 to 2011. We analysed data from 3165 participants in the OHTN Cohort Study attending one of seven specialty HIV care clinics. We obtained chlamydia and gonorrhoea test results via record linkage with the provincial public health laboratory. We estimated the proportion of participants who underwent testing annually, the positivity rate among those tested and the proportion diagnosed with chlamydia or gonorrhoea among all under observation. We explored risk factors for testing and diagnosis using multiple logistic regression analysis. The proportion tested annually rose from 15.2% (95% CI 13.6% to 16.7%) in 2008 to 27.0% (95% CI 25.3% to 28.6%) in 2011 (p<0.0001). Virtually all were urine-based nucleic acid amplification tests. Testing was more common among men who have sex with men (MSM), younger adults, Toronto residents, persons attending primary care clinics and persons who had tested in the previous year or who had more clinic visits in the current year. We observed a decrease in test positivity rates over time. However, the annual proportion diagnosed remained stable and in 2011 this was 0.97% (95% CI 0.61% to 1.3%) and 0.79% (95% CI 0.46% to 1.1%) for chlamydia and gonorrhoea, respectively. Virtually all cases were among MSM. Chlamydia and gonorrhoea testing increased over time while test positivity rates declined and the overall proportion diagnosed remained stable, suggesting that the modest increase in testing did not improve case detection. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Identification of Shifts and Trends in Hydrometric Data in Canada Based on Several Detection Tests

NASA Astrophysics Data System (ADS)

Lauzon, N.; Lence, B. J.

2004-05-01

This work proposes new detection tests based on the Kohonen neural network and on fuzzy c-means for the identification of shifts and trends in data sequences. Annual mean and maximum flow sequences are considered as application case, for they have often been considered for the study of shifts and trends in hydrologic data. In recent years, several studies for the identification of trends have been accomplished with North American hydrometric data, often making use of only one detection test. The assumption here is that one cannot rely on only one test, and consequently several are employed in this work. A total of eight tests are considered, four for shifts and four for trends. Four of these tests, two for shifts and two for trends, are conventional statistical tests that are regularly employed, while the other four are developed based on the Kohonen neural network and on fuzzy c-means. Data from a group of 40 hydrometric stations across Canada are assessed for the detection of shifts and trends in time periods of 30, 40 and 50 years. While the results obtained confirm the conclusions of previous studies performed on similar groups of data, they also indicate that each test may behave differently from one another. For example, one test may detect a trend in a given sequence while the other tests do not, or vice-versa. Thus, the strategy of using several tests ensures not only that they may confirm each others diagnostics but also may complement each other in the case of divergent diagnostics, with the possibility of improving the final conclusion on the detection of shifts and trends. Using artificial intelligence techniques for the construction of detection tests constitutes also a departure from the use of statistics, and a discussion in this work on complementary studies (i.e. detection on multivariate cases) highlights the possibility of enhanced performance by the artificial intelligence-based tests compared with conventional detection tests.

Molecular Testing for Targeted Therapy in Advanced Non-Small Cell Lung Cancer: Suitability of Endobronchial Ultrasound Transbronchial Needle Aspiration.

PubMed

Casadio, Chiara; Guarize, Juliana; Donghi, Stefano; Di Tonno, Clementina; Fumagalli, Caterina; Vacirca, Davide; Dell'Orto, Patrizia; De Marinis, Filippo; Spaggiari, Lorenzo; Viale, Giuseppe; Barberis, Massimo

2015-10-01

Endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) is a minimally invasive procedure that has revolutionized the diagnosis and staging of lung cancer. The goal of the present study was to investigate the yield and applicability of molecular testing in the specimens obtained by EBUS-TBNA from patients with advanced non-small cell lung cancer (NSCLC), comparing the results with a series of patients who underwent diagnostic surgical procedures in the same institution. The study followed 306 consecutive patients with clinically diagnosed primary lung cancer who had the EBUS-TBNA procedure. EGFR and KRAS mutations were evaluated on cytologic specimens by Sanger sequencing and Cobas real-time polymerase chain reaction, whereas ALK rearrangement was tested by fluorescence in situ hybridization. The results were compared with those obtained from a series of 1,000 NSCLC surgical samples routinely analyzed. Molecular testing was possible in 96.9% of the samples obtained by EBUS-TBNA. EGFR (exons 18-21) mutations were found in 16.9%, KRAS mutation (exons 2-3) in 31.6%, and ALK rearrangement in 3.9% of the cases. In the surgical series, the mutations' distribution were 14.8%, 29.0%, and 3.4%, respectively. There were no statistical differences between the two series. Our study demonstrates that EBUS-TBNA can be effectively used not just for diagnosis but also for complete mutational testing. Copyright© by the American Society for Clinical Pathology.

Well development by jetting using coiled tubing and simultaneous pumping.

PubMed

Rosberg, Jan-Erik; Bjelm, Leif

2009-01-01

During flow testing of a deep, 1927-m, gravel packed screen completed well, it became apparent that well development was needed to increase productivity. A hydrojetting system using coiled tubing in combination with simultaneous pumping was developed and tested and found to be successful. To verify whether the jetting improved the well, the results of a pumping test conducted before and after the jetting operation are compared. In addition, flowmeter logging and hydraulic properties obtained from pumping tests conducted during the jetting operation were also used to verify the improvements. Hydrojetting in combination with simultaneous pumping proved to be an effective cleaning method. After 100 min of pumping, around 110 m less drawdown and 15 L/s higher average flow rate were obtained compared to the values before the jetting operation. The skin factor was positive before the jetting operation and negative thereafter, thus providing additional evidence of improvements of the well. The flowmeter data also confirmed the improvements and were valuable in optimizing the jetting operation. It was also found, from the short-term pumping tests conducted during the jetting operation, that the Hantush-Jacob method for leaky confined aquifers is a valuable indicator of the well development. The combination of methods used for the well development in this case can easily be applied on other deep well projects to obtain a controlled and time-efficient well development. Copyright © 2009 The Author(s). Journal Compilation © 2009 National Ground Water Association.

Numerical benchmarking of a Coarse-Mesh Transport (COMET) Method for medical physics applications

NASA Astrophysics Data System (ADS)

Blackburn, Megan Satterfield

2009-12-01

Radiation therapy has become a very import method for treating cancer patients. Thus, it is extremely important to accurately determine the location of energy deposition during these treatments, maximizing dose to the tumor region and minimizing it to healthy tissue. A Coarse-Mesh Transport Method (COMET) has been developed at the Georgia Institute of Technology in the Computational Reactor and Medical Physics Group for use very successfully with neutron transport to analyze whole-core criticality. COMET works by decomposing a large, heterogeneous system into a set of smaller fixed source problems. For each unique local problem that exists, a solution is obtained that we call a response function. These response functions are pre-computed and stored in a library for future use. The overall solution to the global problem can then be found by a linear superposition of these local problems. This method has now been extended to the transport of photons and electrons for use in medical physics problems to determine energy deposition from radiation therapy treatments. The main goal of this work was to develop benchmarks for testing in order to evaluate the COMET code to determine its strengths and weaknesses for these medical physics applications. For response function calculations, legendre polynomial expansions are necessary for space, angle, polar angle, and azimuthal angle. An initial sensitivity study was done to determine the best orders for future testing. After the expansion orders were found, three simple benchmarks were tested: a water phantom, a simplified lung phantom, and a non-clinical slab phantom. Each of these benchmarks was decomposed into 1cm x 1cm and 0.5cm x 0.5cm coarse meshes. Three more clinically relevant problems were developed from patient CT scans. These benchmarks modeled a lung patient, a prostate patient, and a beam re-entry situation. As before, the problems were divided into 1cm x 1cm, 0.5cm x 0.5cm, and 0.25cm x 0.25cm coarse mesh cases. Multiple beam energies were also tested for each case. The COMET solutions for each case were compared to a reference solution obtained by pure Monte Carlo results from EGSnrc. When comparing the COMET results to the reference cases, a pattern of differences appeared in each phantom case. It was found that better results were obtained for lower energy incident photon beams as well as for larger mesh sizes. Possible changes may need to be made with the expansion orders used for energy and angle to better model high energy secondary electrons. Heterogeneity also did not pose a problem for the COMET methodology. Heterogeneous results were found in a comparable amount of time to the homogeneous water phantom. The COMET results were typically found in minutes to hours of computational time, whereas the reference cases typically required hundreds or thousands of hours. A second sensitivity study was also performed on a more stringent problem and with smaller coarse meshes. Previously, the same expansion order was used for each incident photon beam energy so better comparisons could be made. From this second study, it was found that it is optimal to have different expansion orders based on the incident beam energy. Recommendations for future work with this method include more testing on higher expansion orders or possible code modification to better handle secondary electrons. The method also needs to handle more clinically relevant beam descriptions with an energy and angular distribution associated with it.

PM₁₀ exposure and non-accidental mortality in Asian populations: a meta-analysis of time-series and case-crossover studies.

PubMed

Park, Hye Yin; Bae, Sanghyuk; Hong, Yun-Chul

2013-01-01

We investigated the association between particulate matter less than 10 µm in aerodynamic diameter (PM₁₀) exposure and non-accidental mortality in Asian populations by meta-analysis, using both time-series and case-crossover analysis. Among the 819 published studies searched from PubMed and EMBASE using key words related to PM₁₀ exposure and non-accidental mortality in Asian countries, 8 time-series and 4 case-crossover studies were selected for meta-analysis after exclusion by selection criteria. We obtained the relative risk (RR) and 95% confidence intervals (CI) of non-accidental mortality per 10 µg/m³ increase of daily PM₁₀ from each study. We used Q statistics to test the heterogeneity of the results among the different studies and evaluated for publication bias using Begg funnel plot and Egger test. Testing for heterogeneity showed significance (p<0.001); thus, we applied a random-effects model. RR (95% CI) per 10 µg/m³ increase of daily PM₁₀ for both the time-series and case-crossover studies combined, time-series studies relative risk only, and case-crossover studies only, were 1.0047 (1.0033 to 1.0062), 1.0057 (1.0029 to 1.0086), and 1.0027 (1.0010 to 1.0043), respectively. The non-significant Egger test suggested that this analysis was not likely to have a publication bias. We found a significant positive association between PM₁₀ exposure and non-accidental mortality among Asian populations. Continued investigations are encouraged to contribute to the health impact assessment and public health management of air pollution in Asian countries.

Simplified two-dimensional microwave imaging scheme using metamaterial-loaded Vivaldi antenna

NASA Astrophysics Data System (ADS)

Johari, Esha; Akhter, Zubair; Bhaskar, Manoj; Akhtar, M. Jaleel

2017-03-01

In this paper, a highly efficient, low-cost scheme for two-dimensional microwave imaging is proposed. To this end, the AZIM (anisotropic zero index metamaterial) cell-loaded Vivaldi antenna is designed and tested as effective electromagnetic radiation beam source required in the microwave imaging scheme. The designed antenna is first individually tested in the anechoic chamber, and its directivity along with the radiation pattern is obtained. The measurement setup for the imaging here involves a vector network analyzer, the AZIM cell-loaded ultra-wideband Vivaldi antenna, and other associated microwave components. The potential of the designed antenna for the microwave imaging is tested by first obtaining the two-dimensional reflectivity images of metallic samples of different shapes placed in front of the antenna, using the proposed scheme. In the next step, these sets of samples are hidden behind wooden blocks of different thicknesses and the reflectivity image of the test media is reconstructed by using the proposed scheme. Finally, the reflectivity images of various dielectric samples (Teflon, Plexiglas, permanent magnet moving coil) along with the copper sheet placed on a piece of cardboard are reconstructed by using the proposed setup. The images obtained for each case are plotted and compared with the actual objects, and a close match is observed which shows the applicability of the proposed scheme for through-wall imaging and the detection of concealed objects.

Newly developed liquid-based cytology. TACAS™: cytological appearance and HPV testing using liquid-based sample.

PubMed

Kubushiro, Kaneyuki; Taoka, Hideki; Sakurai, Nobuyuki; Yamamoto, Yasuhiro; Kurasaki, Akiko; Asakawa, Yasuyuki; Iwahara, Minoru; Takahashi, Kei

2011-09-01

Cell profiles determined by the thin-layer advanced cytology assay system (TACAS™), a liquid-based cytology technique newly developed in Japan, were analyzed in this study. Hybrid capture 2 (HC-2) was also performed using the liquid-based samples prepared by TACAS to ascertain its ability to detect human papillomavirus (HPV). Cell collection samples from uterine cervix were obtained from 359 patients and examined cytologically. A HC-2 assay for HPV was carried out in the cell specimens. All specimens were found to show background factors such as leukocytes. After excluding the 5 unsatisfactory cases from the total 354 cases, 82 cases (23.2%) were positive and 272 cases (76.8%) were negative for HPV. Cell specimens from 30 HPV-positive cases and 166 HPV-negative cases were subjected to 4 weeks of preservation at room temperature. Then, when subsequently re-assayed, 28 cases (93.3%) in the former group were found to be HPV positive and 164 cases (98.8%) in the latter group were found to be HPV negative. These results supported the excellent reproducibility of TACAS for HPV testing. A reasonable inference from the foregoing analysis is that TACAS may be distinguished from other liquid-based cytological approaches, such as ThinPrep and SurePath, in that it can retain the cell backgrounds. Furthermore, this study raises the possibility that cell specimens prepared using TACAS could be preserved for at least 4 weeks prior to carrying out a HC-2 assay for HPV.

A Third Moment Adjusted Test Statistic for Small Sample Factor Analysis.

PubMed

Lin, Johnny; Bentler, Peter M

2012-01-01

Goodness of fit testing in factor analysis is based on the assumption that the test statistic is asymptotically chi-square; but this property may not hold in small samples even when the factors and errors are normally distributed in the population. Robust methods such as Browne's asymptotically distribution-free method and Satorra Bentler's mean scaling statistic were developed under the presumption of non-normality in the factors and errors. This paper finds new application to the case where factors and errors are normally distributed in the population but the skewness of the obtained test statistic is still high due to sampling error in the observed indicators. An extension of Satorra Bentler's statistic is proposed that not only scales the mean but also adjusts the degrees of freedom based on the skewness of the obtained test statistic in order to improve its robustness under small samples. A simple simulation study shows that this third moment adjusted statistic asymptotically performs on par with previously proposed methods, and at a very small sample size offers superior Type I error rates under a properly specified model. Data from Mardia, Kent and Bibby's study of students tested for their ability in five content areas that were either open or closed book were used to illustrate the real-world performance of this statistic.

An articulated rotating brush for office endometrial evaluation of climacteric outpatients.

PubMed

Bocanera, A R; Roncoroni, E C; Schlaen, I; Ben, J; Monteverde, R; González García, M; Puche, R C; Tozzini, R

1994-05-01

This paper reports the experience obtained in the last 8 years with an instrument (articulated rotative brush) that allows access to the entire endometrial surface, obtaining material for both histological and cytological study. The latter has the advantage of reducing the number of cases in which insufficient material frustrates endometrial assessment. In addition to the overall experience gained with this instrument, the proportion of agreement with anatomo-pathological diagnosis after hysterectomy in 61 patients was high (96%) and the unweighted kappa statistic (0.862) indicated very good accordance between these techniques. Comparison between the present method and hysteroscopic observations in 84 patients with perimenopausal bleeding revealed a general conformity of 0.65 and an unweighted kappa statistic of 0.368 (fair agreement). In a group of 72 cases with postmenopausal bleeding a general conformity value of 0.92 was obtained, with an unweighted kappa statistic of 0.84 (very good agreement). In 90% of the cases the procedure was well accepted. In 57.3% of the cases, no difficulties were encountered using the brushing technique; in 25.9% slight dilatation was deemed necessary, whereas in 16.8% technical difficulties could not be overcome and general anesthesia was indicated. A total of 769 outpatients were investigated, 75.3% of which had normal endometria, 12.7% benign hyperplasias, 2.6% precursor lesions, 1.7% suspect carcinoma, and 4.2% carcinomas. Insufficient material for diagnosis occurred in 3.5% of cases tested. The combined cytohistological and hysteroscopic assessment of the endometrium provides satisfactory results in the etiological diagnosis of peri and postmenopausal bleeding, and in the follow up of patients undergoing hormonal replacement therapy (HRT).

Diagnosis of Parkinsonian disorders using a channelized Hotelling observer model: Proof of principle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bal, H.; Bal, G.; Acton, P. D.

2007-10-15

Imaging dopamine transporters using PET and SPECT probes is a powerful technique for the early diagnosis of Parkinsonian disorders. In order to perform automated accurate diagnosis of these diseases, a channelized Hotelling observer (CHO) based model was developed and evaluated using the SPECT tracer [Tc-99m]TRODAT-1. Computer simulations were performed using a digitized striatal phantom to characterize early stages of the disease (20 lesion-present cases with varying lesion size and contrast). Projection data, modeling the effects of attenuation and geometric response function, were obtained for each case. Statistical noise levels corresponding to those observed clinically were added to the projection datamore » to obtain 100 noise realizations for each case. All the projection data were reconstructed, and a subset of the transaxial slices containing the striatum was summed and used for further analysis. CHO models, using the Laguerre-Gaussian functions as channels, were designed for two cases: (1) By training the model using individual lesion-present samples and (2) by training the model using pooled lesion-present samples. A decision threshold obtained for each CHO model was used to classify the study population (n=40). It was observed that individual lesion trained CHO models gave high diagnostic accuracy for lesions that were larger than those used to train the model and vice-versa. On the other hand, the pooled CHO model was found to give a high diagnostic accuracy for all the lesion cases (average diagnostic accuracy=0.95{+-}0.07; p<0.0001 Fisher's exact test). Based on our results, we conclude that a CHO model has the potential to provide early and accurate diagnosis of Parkinsonian disorders, thereby improving patient management.« less

Lessons learnt from early failure of a patient trial with a polymer-on-polymer resurfacing hip arthroplasty

PubMed Central

Van Susante, Job L C; Verdonschot, Nico; Bom, L Paul A; Tomaszewski, Pawel; Campbell, Pat; Ebramzadeh, Edward; Schreurs, B Wim

2018-01-01

Background and purpose Hip resurfacing (HR) is a treatment option promoted for hip arthritis in young and active patients. However, adverse reactions to metal are a concern and the search for non-metallic bearing options proceeds. We present the first clinical study performed in patients using a newly developed hydrophilic polymer-on-polymer hip resurfacing device. Patients and methods After performing extensive hip simulator tests, biocompatibility testing and animal tests (ISO 14242-1,3; 10993-3,4,5,10,11), approval was obtained from the IRB committee to enroll 15 patients in the first clinical study in humans using this experimental polymer-on-polymer hip resurfacing device. All surgeries were done by 2 experienced hip resurfacing surgeons. Clinical scores and standard radiographs as well as routine MRIs were obtained at regular intervals. Results The surgical technique proved feasible with successful implantation of the new device using PMMA cement fixation on both sides without complications. Postoperative imaging revealed a well-positioned and well-fixed polymer resurfacing hip arthroplasty in all 4 initial cases. All 4 patients were free of pain and had good function for the first 2 months. However, in all 4 cases early cup loosening occurred between 8 and 11 weeks after surgery, necessitating immediate closure of the study. All 4 patients had a reoperation and were revised to a conventional THA. Retrieval analyses confirmed early cup loosening at the implant–cement interface in all 4 cases. The femoral components remained well attached to the cement. The periprosthetic tissues showed only small amounts of polymeric wear debris and there was only a very mild inflammatory reaction to this. Interpretation Early cup loosening mandated a premature arrest of this study. After additional laboratory testing this failure mode was found to be the result of a small, yet measurable contraction in the cup size after exposing these implants to biological fluid divalent ion fluctuations in vivo. Currently used preclinical tests had failed to detect this failure mechanism. Modification of the polymer is essential to overcome these problems and before the potential of a polymer-on-polymer resurfacing arthroplasty may be further evaluated in patients. PMID:28931340

Lessons learnt from early failure of a patient trial with a polymer-on-polymer resurfacing hip arthroplasty.

PubMed

Van Susante, Job L C; Verdonschot, Nico; Bom, L Paul A; Tomaszewski, Pawel; Campbell, Pat; Ebramzadeh, Edward; Schreurs, B Wim

2018-02-01

Background and purpose - Hip resurfacing (HR) is a treatment option promoted for hip arthritis in young and active patients. However, adverse reactions to metal are a concern and the search for non-metallic bearing options proceeds. We present the first clinical study performed in patients using a newly developed hydrophilic polymer-on-polymer hip resurfacing device. Patients and methods - After performing extensive hip simulator tests, biocompatibility testing and animal tests (ISO 14242-1,3; 10993-3,4,5,10,11), approval was obtained from the IRB committee to enroll 15 patients in the first clinical study in humans using this experimental polymer-on-polymer hip resurfacing device. All surgeries were done by 2 experienced hip resurfacing surgeons. Clinical scores and standard radiographs as well as routine MRIs were obtained at regular intervals. Results - The surgical technique proved feasible with successful implantation of the new device using PMMA cement fixation on both sides without complications. Postoperative imaging revealed a well-positioned and well-fixed polymer resurfacing hip arthroplasty in all 4 initial cases. All 4 patients were free of pain and had good function for the first 2 months. However, in all 4 cases early cup loosening occurred between 8 and 11 weeks after surgery, necessitating immediate closure of the study. All 4 patients had a reoperation and were revised to a conventional THA. Retrieval analyses confirmed early cup loosening at the implant-cement interface in all 4 cases. The femoral components remained well attached to the cement. The periprosthetic tissues showed only small amounts of polymeric wear debris and there was only a very mild inflammatory reaction to this. Interpretation - Early cup loosening mandated a premature arrest of this study. After additional laboratory testing this failure mode was found to be the result of a small, yet measurable contraction in the cup size after exposing these implants to biological fluid divalent ion fluctuations in vivo. Currently used preclinical tests had failed to detect this failure mechanism. Modification of the polymer is essential to overcome these problems and before the potential of a polymer-on-polymer resurfacing arthroplasty may be further evaluated in patients.

Comparison of the serum and salivary antibodies to detect gastric Helicobacter pylori infection in Kashan (Iran).

PubMed

Piroozmand, Ahmad; Soltani, Babak; Razavizadeh, Mohsen; Matini, Amir Hasan; Gilasi, Hamid Reza; Zavareh, Abbas Nassaji; Soltani, Siamak

2017-12-01

Helicobacter pylori ( H. pylori ) is an important and common contagious human pathogen which may cause peptic ulcer and also gastric cancer. The definite diagnosis of it is made through invasive tests. Recently, non-invasive tests including serologic tests of serum and saliva have been conducted for diagnosis of H. pylori infection. In this research, the diagnostic values of serum and salivary serology were compared together to use salivary anti- H. pylori test as an alternative method in the future. During this prospective case-control study on patients who were candidates for endoscopy and gastric biopsy from March 2015 to April 2016 in Shahid Beheshti hospital, Kashan, Iran, serum and salivary samples were obtained for measurement of Immunoglobulin G (IgG) antibody levels against H. pylori by enzyme-linked immunosorbent assay (ELISA). Histopathology was the gold standard test. Statistical analysis was performed by SPSS software version 16. Statistical tests included Kolmogorov-Smirnov, independent-samples t-test, Chi-square, Mann-Whitney U, Kruskal-Wallis, McNemar and correlation. Of 123 patients, sixty-one patients (49.6%) were H. pylori -positive according to histology. The median levels of anti- H. pylori antibodies in serum (p<0.001) and saliva (p<0.001) of H. pylori -positive cases were significantly higher than H. pylori -negative cases. Sensitivity, specificity, positive likelihood ratio, negative likelihood ratio and accuracy of serologic tests in serum were 75%, 79%, 3.5, 0.3, 77% and for saliva were 85%, 82%, 4.7, 0.18, 84% respectively. Diagnostic values of salivary ELISA are comparable to serum ELISA and can be used as an alternative modality for diagnosis of H. pylori infection.

Test wells T23, T29, and T30, White Sands Missile Range and Fort Bliss Military Reservation, Dona Ana County, New Mexico

USGS Publications Warehouse

Myers, R.G.; Pinckley, K.M.

1984-01-01

Three test wells, T23, T29, and T30, were drilled in south-central New Mexico as part of a joint military training program sponsored by the U.S. Army in November 1982. Test well T23 was drilled as an exploratory and monitoring well in the proposed Soledad well field at the Fort Bliss Military Reservation. Test wells T29 and T30 were drilled at White Sands Missile Range. Test well T29 was drilled as an observation well in the vicinity of the outfall channel from the sewage treatment plant. Test well T30 was drilled as an observation well for a landfill south of the well site. Information obtained from these wells includes lithologic logs for all wells and borehole-geophysical logs from the cased wells for test wells T29 and T30. (USGS)

Contact allergy to denture materials in the burning mouth syndrome.

PubMed

van Joost, T; van Ulsen, J; van Loon, L A

1988-02-01

Several factors may be responsible for stomatitis in general and the burning mouth syndrome in particular. The results of patch testing are reported in 4 patients with burning mouth symptoms thought to be due to sensitization to denture material. 2 patients reacted to substances in Luxene dentures, but the allergens were not identified. In a 3rd patient, sensitization was found to monomeric methyl methacrylate. The other patient gave positive patch tests to epoxy resin (and bisphenol A), probably present in glue used for repair of dental plates. To obtain a complete diagnosis in cases of suspected contact stomatitis due to allergens in dentures, a reliable standard test series is required.

Optimizing transformations of stencil operations for parallel cache-based architectures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bassetti, F.; Davis, K.

This paper describes a new technique for optimizing serial and parallel stencil- and stencil-like operations for cache-based architectures. This technique takes advantage of the semantic knowledge implicity in stencil-like computations. The technique is implemented as a source-to-source program transformation; because of its specificity it could not be expected of a conventional compiler. Empirical results demonstrate a uniform factor of two speedup. The experiments clearly show the benefits of this technique to be a consequence, as intended, of the reduction in cache misses. The test codes are based on a 5-point stencil obtained by the discretization of the Poisson equation andmore » applied to a two-dimensional uniform grid using the Jacobi method as an iterative solver. Results are presented for a 1-D tiling for a single processor, and in parallel using 1-D data partition. For the parallel case both blocking and non-blocking communication are tested. The same scheme of experiments has bee n performed for the 2-D tiling case. However, for the parallel case the 2-D partitioning is not discussed here, so the parallel case handled for 2-D is 2-D tiling with 1-D data partitioning.« less

Scleritis Caused by In Vitro Linezolid-Resistant Nocardia asteroides

PubMed Central

Tuli, Sonal

2014-01-01

Purpose. To describe a case of postoperative scleritis caused by a novel strain of Nocardia resistant to linezolid and trimethoprim-sulfamethoxazole (TMP-SMX). Methods. Case report of a patient with microbiologically proven scleritis due to Nocardia asteroides. Results. The patient presented with pain, redness, and nodules on the sclera three months following pterygium excision with mitomycin C and amniotic membrane placement. As no response was noted with empiric treatment for bacterial scleritis, debridement was performed. The cytopathology report showed gram positive filamentous bacteria. A presumptive diagnosis of Nocardia scleritis was made and therapy was initiated based on a literature review on treatments for Nocardia infections. Cultures returned growing Nocardia asteroides. Antibiotic sensitivity testing revealed resistance to linezolid and TMP-SMX which are the traditional drugs of choice for Nocardia. The patient was treated with amikacin and imipenem as well as extensive debridement with pedicle grafts. The patient's scleritis resolved with a good visual outcome. Conclusions. Cultures should be obtained in all cases of necrotizing scleritis in patients with a recent history of conjunctival surgery to rule out unusual organisms such as Nocardia. Although literature states that resistance to linezolid and TMP-SMX is rare in Nocardia, sensitivity testing can be useful in unresponsive cases. PMID:25400961

Scleritis Caused by In Vitro Linezolid-Resistant Nocardia asteroides.

PubMed

Gonzalez, Andres; Fakhar, Kaihan; Gubernick, David; Tuli, Sonal

2014-01-01

Purpose. To describe a case of postoperative scleritis caused by a novel strain of Nocardia resistant to linezolid and trimethoprim-sulfamethoxazole (TMP-SMX). Methods. Case report of a patient with microbiologically proven scleritis due to Nocardia asteroides. Results. The patient presented with pain, redness, and nodules on the sclera three months following pterygium excision with mitomycin C and amniotic membrane placement. As no response was noted with empiric treatment for bacterial scleritis, debridement was performed. The cytopathology report showed gram positive filamentous bacteria. A presumptive diagnosis of Nocardia scleritis was made and therapy was initiated based on a literature review on treatments for Nocardia infections. Cultures returned growing Nocardia asteroides. Antibiotic sensitivity testing revealed resistance to linezolid and TMP-SMX which are the traditional drugs of choice for Nocardia. The patient was treated with amikacin and imipenem as well as extensive debridement with pedicle grafts. The patient's scleritis resolved with a good visual outcome. Conclusions. Cultures should be obtained in all cases of necrotizing scleritis in patients with a recent history of conjunctival surgery to rule out unusual organisms such as Nocardia. Although literature states that resistance to linezolid and TMP-SMX is rare in Nocardia, sensitivity testing can be useful in unresponsive cases.

Bayesian approach for counting experiment statistics applied to a neutrino point source analysis

NASA Astrophysics Data System (ADS)

Bose, D.; Brayeur, L.; Casier, M.; de Vries, K. D.; Golup, G.; van Eijndhoven, N.

2013-12-01

In this paper we present a model independent analysis method following Bayesian statistics to analyse data from a generic counting experiment and apply it to the search for neutrinos from point sources. We discuss a test statistic defined following a Bayesian framework that will be used in the search for a signal. In case no signal is found, we derive an upper limit without the introduction of approximations. The Bayesian approach allows us to obtain the full probability density function for both the background and the signal rate. As such, we have direct access to any signal upper limit. The upper limit derivation directly compares with a frequentist approach and is robust in the case of low-counting observations. Furthermore, it allows also to account for previous upper limits obtained by other analyses via the concept of prior information without the need of the ad hoc application of trial factors. To investigate the validity of the presented Bayesian approach, we have applied this method to the public IceCube 40-string configuration data for 10 nearby blazars and we have obtained a flux upper limit, which is in agreement with the upper limits determined via a frequentist approach. Furthermore, the upper limit obtained compares well with the previously published result of IceCube, using the same data set.

[Formula: see text] regularity properties of singular parameterizations in isogeometric analysis.

PubMed

Takacs, T; Jüttler, B

2012-11-01

Isogeometric analysis (IGA) is a numerical simulation method which is directly based on the NURBS-based representation of CAD models. It exploits the tensor-product structure of 2- or 3-dimensional NURBS objects to parameterize the physical domain. Hence the physical domain is parameterized with respect to a rectangle or to a cube. Consequently, singularly parameterized NURBS surfaces and NURBS volumes are needed in order to represent non-quadrangular or non-hexahedral domains without splitting, thereby producing a very compact and convenient representation. The Galerkin projection introduces finite-dimensional spaces of test functions in the weak formulation of partial differential equations. In particular, the test functions used in isogeometric analysis are obtained by composing the inverse of the domain parameterization with the NURBS basis functions. In the case of singular parameterizations, however, some of the resulting test functions do not necessarily fulfill the required regularity properties. Consequently, numerical methods for the solution of partial differential equations cannot be applied properly. We discuss the regularity properties of the test functions. For one- and two-dimensional domains we consider several important classes of singularities of NURBS parameterizations. For specific cases we derive additional conditions which guarantee the regularity of the test functions. In addition we present a modification scheme for the discretized function space in case of insufficient regularity. It is also shown how these results can be applied for computational domains in higher dimensions that can be parameterized via sweeping.

Non-invasive risk assessment of fetal sex chromosome aneuploidy through directed analysis and incorporation of fetal fraction.

PubMed

Hooks, J; Wolfberg, A J; Wang, E T; Struble, C A; Zahn, J; Juneau, K; Mohseni, M; Huang, S; Bogard, P; Song, K; Oliphant, A; Musci, T J

2014-05-01

To assess the performance of a directed chromosomal analysis approach in the prenatal evaluation of fetal sex chromosome aneuploidy. We analyzed 432 frozen maternal plasma samples obtained from patients prior to undergoing fetal diagnostic testing. The cohort included women greater than 18 years of age with a singleton pregnancy of greater than 10 weeks gestation. Samples were analyzed using a chromosome-selective approach (DANSR(TM) ) and a risk algorithm that incorporates fetal fraction (FORTE(TM) ). The cohort included 34 cases of sex chromosome aneuploidy. The assay correctly identified 26 of 27 (92.6%) cases of Monosomy X, one case of XXX, and all six cases of XXY. There were four false positive cases of sex chromosome aneuploidy among 380 euploid cases for an overall false positive rate of less than 1%. Analysis of the risk for sex chromosome aneuploidies can be accomplished with a targeted assay with high sensitivity. © 2014 John Wiley & Sons, Ltd.

Validation of fault-free behavior of a reliable multiprocessor system - FTMP: A case study. [Fault-Tolerant Multi-Processor avionics

NASA Technical Reports Server (NTRS)

Clune, E.; Segall, Z.; Siewiorek, D.

1984-01-01

A program of experiments has been conducted at NASA-Langley to test the fault-free performance of a Fault-Tolerant Multiprocessor (FTMP) avionics system for next-generation aircraft. Baseline measurements of an operating FTMP system were obtained with respect to the following parameters: instruction execution time, frame size, and the variation of clock ticks. The mechanisms of frame stretching were also investigated. The experimental results are summarized in a table. Areas of interest for future tests are identified, with emphasis given to the implementation of a synthetic workload generation mechanism on FTMP.

[Value of injection hepato-lymphography during percutaneous transhepatic cholangiography in patients with cholestasis].

PubMed

Sharipov, V Sh

2000-01-01

Injection hepatography (IH) was made in 278 patients with cholestasis to study the drainage function of the liver. In 208 cases. IH was performed as a test during percutaneous transhepatic cholangiography (PTHC). The hepatic lymph pathways were imaged in 167 (60%) patients. Images of the biliary tract were obtained in 245 (88.1%) patients with cholestasis, it being not dilated in 34 (12.2%) patients. The fact that hepatolymphography may be performed during PTHC as an independent test permits verification of hepatic lymph circulatory disorders that are an index of the rate of inflammation in the organ.

On Blockage Corrections for Two-dimensional Wind Tunnel Tests Using the Wall-pressure Signature Method

NASA Technical Reports Server (NTRS)

Allmaras, S. R.

1986-01-01

The Wall-Pressure Signature Method for correcting low-speed wind tunnel data to free-air conditions has been revised and improved for two-dimensional tests of bluff bodies. The method uses experimentally measured tunnel wall pressures to approximately reconstruct the flow field about the body with potential sources and sinks. With the use of these sources and sinks, the measured drag and tunnel dynamic pressure are corrected for blockage effects. Good agreement is obtained with simpler methods for cases in which the blockage corrections were about 10% of the nominal drag values.

Simulations of NOx Emissions from Low Emissions Discrete Jet Injector Combustor Tests

NASA Technical Reports Server (NTRS)

Ajmani, Kumud; Breisacher, Kevin

2014-01-01

An experimental and computational study was conducted to evaluate the performance and emissions characteristics of a candidate Lean Direct Injection (LDI) combustor configuration with a mix of simplex and airblast injectors. The National Combustion Code (NCC) was used to predict the experimentally measured EINOx emissions for test conditions representing low power, medium power, and high-power engine cycle conditions. Of the six cases modeled with the NCC using a reduced-kinetics finite-rate mechanism and lagrangian spray modeling, reasonable predictions of combustor exit temperature and EINOx were obtained at two high-power cycle conditions.

Advanced Transport Operating Systems Program

NASA Technical Reports Server (NTRS)

White, John J.

1990-01-01

NASA-Langley's Advanced Transport Operating Systems Program employs a heavily instrumented, B 737-100 as its Transport Systems Research Vehicle (TRSV). The TRSV has been used during the demonstration trials of the Time Reference Scanning Beam Microwave Landing System (TRSB MLS), the '4D flight-management' concept, ATC data links, and airborne windshear sensors. The credibility obtainable from successful flight test experiments is often a critical factor in the granting of substantial commitments for commercial implementation by the FAA and industry. In the case of the TRSB MLS, flight test demonstrations were decisive to its selection as the standard landing system by the ICAO.

(Full field) optical coherence tomography and applications

NASA Astrophysics Data System (ADS)

Buchroithner, Boris; Hannesschläger, Günther; Leiss-Holzinger, Elisabeth; Prylepa, Andrii; Heise, Bettina

2018-03-01

This paper illustrates specific features and use of optical coherence tomography (OCT) in the raster-scanning and in comparison in the full field version of this imaging technique. Cases for nondestructive testing are discussed alongside other application schemes. In particular monitoring time-dependent processes and probing of birefringent specimens are considered here. In the context of polymer testing birefringence mapping may often provide information about internal strain and stress states. Recent results obtained with conventional raster-scanning OCT systems, with (dual and single-shot) full field OCT configurations, and with polarization-sensitive versions of (full field) OCT are presented here.

Cost effectiveness of conventional versus LANDSAT use data for hydrologic modeling

NASA Technical Reports Server (NTRS)

George, T. S.; Taylor, R. S.

1982-01-01

Six case studies were analyzed to investigate the cost effectiveness of using land use data obtained from LANDSAT as opposed to conventionally obtained data. A procedure was developed to determine the relative effectiveness of the two alternative means of acquiring data for hydrological modelling. The cost of conventionally acquired data ranged between $3,000 and $16,000 for the six test basins. Information based on LANDSAT imagery cost between $2,000 and $5,000. Results of the effectiveness analysis shows the differences between the two methods are insignificant. From the cost comparison and the act that each method, conventional and LANDSAT, is shown to be equally effective in developing land use data for hydrologic studies, the cost effectiveness of the conventional or LANDSAT method is found to be a function of basin size for the six test watersheds analyzed. The LANDSAT approach is cost effective for areas containing more than 10 square miles.

Expert System Diagnosis of Cataract Eyes Using Fuzzy Mamdani Method

NASA Astrophysics Data System (ADS)

Santosa, I.; Romla, L.; Herawati, S.

2018-01-01

Cataracts are eye diseases characterized by cloudy or opacity of the lens of the eye by changing the colour of black into grey-white which slowly continues to grow and develop without feeling pain and pain that can cause blindness in human vision. Therefore, researchers make an expert system of cataract eye disease diagnosis by using Fuzzy Mamdani and how to care. The fuzzy method can convert the crisp value to linguistic value by fuzzification and includes in the rule. So this system produces an application program that can help the public in knowing cataract eye disease and how to care based on the symptoms suffered. From the results of the design implementation and testing of expert system applications to diagnose eye disease cataracts, it can be concluded that from a trial of 50 cases of data, obtained test results accuracy between system predictions with expert predictions obtained a value of 78% truth.

Determine the Compressive Strength of Calcium Silicate Bricks by Combined Nondestructive Method

PubMed Central

2014-01-01

The paper deals with the application of combined nondestructive method for assessment of compressive strength of calcium silicate bricks. In this case, it is a combination of the rebound hammer method and ultrasonic pulse method. Calibration relationships for determining compressive strength of calcium silicate bricks obtained from nondestructive parameter testing for the combined method as well as for the L-type Schmidt rebound hammer and ultrasonic pulse method are quoted here. Calibration relationships are known for their close correlation and are applicable in practice. The highest correlation between parameters from nondestructive measurement and predicted compressive strength is obtained using the SonReb combined nondestructive method. Combined nondestructive SonReb method was proved applicable for determination of compressive strength of calcium silicate bricks at checking tests in a production plant and for evaluation of bricks built in existing masonry structures. PMID:25276864

Semantic super networks: A case analysis of Wikipedia papers

NASA Astrophysics Data System (ADS)

Kostyuchenko, Evgeny; Lebedeva, Taisiya; Goritov, Alexander

2017-11-01

An algorithm for constructing super-large semantic networks has been developed in current work. Algorithm was tested using the "Cosmos" category of the Internet encyclopedia "Wikipedia" as an example. During the implementation, a parser for the syntax analysis of Wikipedia pages was developed. A graph based on list of articles and categories was formed. On the basis of the obtained graph analysis, algorithms for finding domains of high connectivity in a graph were proposed and tested. Algorithms for constructing a domain based on the number of links and the number of articles in the current subject area is considered. The shortcomings of these algorithms are shown and explained, an algorithm is developed on their joint use. The possibility of applying a combined algorithm for obtaining the final domain is shown. The problem of instability of the received domain was discovered when starting an algorithm from two neighboring vertices related to the domain.

Modeling the language learning strategies and English language proficiency of pre-university students in UMS: A case study

NASA Astrophysics Data System (ADS)

Kiram, J. J.; Sulaiman, J.; Swanto, S.; Din, W. A.

2015-10-01

This study aims to construct a mathematical model of the relationship between a student's Language Learning Strategy usage and English Language proficiency. Fifty-six pre-university students of University Malaysia Sabah participated in this study. A self-report questionnaire called the Strategy Inventory for Language Learning was administered to them to measure their language learning strategy preferences before they sat for the Malaysian University English Test (MUET), the results of which were utilised to measure their English language proficiency. We attempted the model assessment specific to Multiple Linear Regression Analysis subject to variable selection using Stepwise regression. We conducted various assessments to the model obtained, including the Global F-test, Root Mean Square Error and R-squared. The model obtained suggests that not all language learning strategies should be included in the model in an attempt to predict Language Proficiency.

Comparison of two case-based learning conditions with real patients in teaching occupational medicine.

PubMed

Braeckman, Lutgart; 't Kint, Lode; Bekaert, Micheline; Cobbaut, Luc; Janssens, Heidi

2014-04-01

To investigate the impact of three different training formats in occupational medicine (OM) on perceptions and performance of undergraduate students. A comparative study which included all fourth-year medical students was conducted over a three-year period. The year group in 2010 (211 students) received paper case studies followed by one small group session. The format used in 2011 actively engaged 188 students in the learning process by adding collaborative work and group discussions to the written information. In 2012, the approach comprised no longer constructed text cases but 212 students encountered real patients. Students' perceptions were obtained by questionnaire. Their learning performance was assessed through review of written reports and score on oral presentations. Statistical differences in ratings were analyzed using Fisher's exact and Kruskal-Wallis tests. All three formats were found to equally achieve the stated learning objectives. The year groups with incorporation of active learning strategies and patient contacts had significant better test performance compared to those receiving only written case studies. Real patient students gave statistically significant higher rates for relevance, authenticity and appropriate difficulty level of the training than did students who discussed written case studies. Both approaches with augmented interaction in 2011 and 2012, improved performance and satisfaction among students. However, students valued the use of real patients higher than paper-form cases.

Definition of Linear Color Models in the RGB Vector Color Space to Detect Red Peaches in Orchard Images Taken under Natural Illumination

PubMed Central

Teixidó, Mercè; Font, Davinia; Pallejà, Tomàs; Tresanchez, Marcel; Nogués, Miquel; Palacín, Jordi

2012-01-01

This work proposes the detection of red peaches in orchard images based on the definition of different linear color models in the RGB vector color space. The classification and segmentation of the pixels of the image is then performed by comparing the color distance from each pixel to the different previously defined linear color models. The methodology proposed has been tested with images obtained in a real orchard under natural light. The peach variety in the orchard was the paraguayo (Prunus persica var. platycarpa) peach with red skin. The segmentation results showed that the area of the red peaches in the images was detected with an average error of 11.6%; 19.7% in the case of bright illumination; 8.2% in the case of low illumination; 8.6% for occlusion up to 33%; 12.2% in the case of occlusion between 34 and 66%; and 23% for occlusion above 66%. Finally, a methodology was proposed to estimate the diameter of the fruits based on an ellipsoidal fitting. A first diameter was obtained by using all the contour pixels and a second diameter was obtained by rejecting some pixels of the contour. This approach enables a rough estimate of the fruit occlusion percentage range by comparing the two diameter estimates. PMID:22969369

Definition of linear color models in the RGB vector color space to detect red peaches in orchard images taken under natural illumination.

PubMed

Teixidó, Mercè; Font, Davinia; Pallejà, Tomàs; Tresanchez, Marcel; Nogués, Miquel; Palacín, Jordi

2012-01-01

This work proposes the detection of red peaches in orchard images based on the definition of different linear color models in the RGB vector color space. The classification and segmentation of the pixels of the image is then performed by comparing the color distance from each pixel to the different previously defined linear color models. The methodology proposed has been tested with images obtained in a real orchard under natural light. The peach variety in the orchard was the paraguayo (Prunus persica var. platycarpa) peach with red skin. The segmentation results showed that the area of the red peaches in the images was detected with an average error of 11.6%; 19.7% in the case of bright illumination; 8.2% in the case of low illumination; 8.6% for occlusion up to 33%; 12.2% in the case of occlusion between 34 and 66%; and 23% for occlusion above 66%. Finally, a methodology was proposed to estimate the diameter of the fruits based on an ellipsoidal fitting. A first diameter was obtained by using all the contour pixels and a second diameter was obtained by rejecting some pixels of the contour. This approach enables a rough estimate of the fruit occlusion percentage range by comparing the two diameter estimates.

Fast nuclear staining of head hair roots as a screening method for successful STR analysis in forensics.

PubMed

Lepez, Trees; Vandewoestyne, Mado; Van Hoofstat, David; Deforce, Dieter

2014-11-01

The success rate of STR profiling of hairs found at a crime scene is quite low and negative results of hair analysis are frequently reported. To increase the success rate of DNA analysis of hairs in forensics, nuclei in hair roots can be counted after staining the hair root with DAPI. Two staining methods were tested: a longer method with two 1h incubations in respectively a DAPI- and a wash-solution, and a fast, direct staining of the hair root on microscope slides. The two staining methods were not significantly different. The results of the STR analysis for both procedures showed that 20 nuclei are necessary to obtain at least partial STR profiles. When more than 50 nuclei were counted, full STR profiles were always obtained. In 96% of the cases where no nuclei were detected, no STR profile could be obtained. However, 4% of the DAPI-negative hair roots resulted in at least partial STR profiles. Therefore, each forensic case has to be evaluated separately in function of the importance of the evidential value of the found hair. The fast staining method was applied in 36 forensic cases on 279 hairs in total. A fast screening method using DAPI can be used to increase the success rate of hair analysis in forensics. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Effect of heat damage in an autoclave on the reactive lysine contents of soy products and corn distillers dried grains with solubles. Use of the results to check on lysine damage in common qualities of these ingredients.

PubMed

Fontaine, Johannes; Zimmer, Ulrike; Moughan, Paul J; Rutherfurd, Shane M

2007-12-26

The suitability of the homoarginine reaction for determining the reactive lysine in soy products and corn distillers dried grain with solubles (DDGS) was tested. For this purpose, some batches were subjected to deliberate heat damage for up to 30 min in an autoclave with 135 degrees C hot steam, and the samples were analyzed for total lysine and reactive lysine. In addition, 84 samples of common soy and 80 samples of corn DDGS were tested for their content of total and reactive lysine, and the contents were compared with those of the autoclave tests. For soy products conclusive results were obtained. In the case of heat treatment, both total lysine and reactive lysine decrease, but the latter is clearly a more sensitive indicator of lysine damage. Most normal products are quite similar, with toasting-induced damage to reactive lysine of ca. 15% compared to untoasted beans. The cause of the constantly occurring residual lysine after guanidination and the poorer reaction balance in the case of damage were explained. For common DDGS samples, however, less favorable results were obtained. Reactive and total lysine decreased almost in parallel due to heat damage, showing a great gap between them. Results showed indeed that variation of total and reactive lysine in DDGS is high, proving that its production conditions are not yet optimal for a feed ingredient.

Benchmark test of neutron transport calculations: indium, nickel, gold, europium, and cobalt activation with and without energy moderated fission neutrons by iron simulating the Hiroshima atomic bomb casing.

PubMed

Iwatani, K; Hoshi, M; Shizuma, K; Hiraoka, M; Hayakawa, N; Oka, T; Hasai, H

1994-10-01

A benchmark test of the Monte Carlo neutron and photon transport code system (MCNP) was performed using a bare- and energy-moderated 252Cf fission neutron source which was obtained by transmission through 10-cm-thick iron. An iron plate was used to simulate the effect of the Hiroshima atomic bomb casing. This test includes the activation of indium and nickel for fast neutrons and gold, europium, and cobalt for thermal and epithermal neutrons, which were inserted in the moderators. The latter two activations are also to validate 152Eu and 60Co activity data obtained from the atomic bomb-exposed specimens collected at Hiroshima and Nagasaki, Japan. The neutron moderators used were Lucite and Nylon 6 and the total thickness of each moderator was 60 cm or 65 cm. Measured activity data (reaction yield) of the neutron-irradiated detectors in these moderators decreased to about 1/1,000th or 1/10,000th, which corresponds to about 1,500 m ground distance from the hypocenter in Hiroshima. For all of the indium, nickel, and gold activity data, the measured and calculated values agreed within 25%, and the corresponding values for europium and cobalt were within 40%. From this study, the MCNP code was found to be accurate enough for the bare- and energy-moderated 252Cf neutron activation calculations of these elements using moderators containing hydrogen, carbon, nitrogen, and oxygen.

Improving the performance of lesion-based computer-aided detection schemes of breast masses using a case-based adaptive cueing method

NASA Astrophysics Data System (ADS)

Tan, Maxine; Aghaei, Faranak; Wang, Yunzhi; Qian, Wei; Zheng, Bin

2016-03-01

Current commercialized CAD schemes have high false-positive (FP) detection rates and also have high correlations in positive lesion detection with radiologists. Thus, we recently investigated a new approach to improve the efficacy of applying CAD to assist radiologists in reading and interpreting screening mammograms. Namely, we developed a new global feature based CAD approach/scheme that can cue the warning sign on the cases with high risk of being positive. In this study, we investigate the possibility of fusing global feature or case-based scores with the local or lesion-based CAD scores using an adaptive cueing method. We hypothesize that the information from the global feature extraction (features extracted from the whole breast regions) are different from and can provide supplementary information to the locally-extracted features (computed from the segmented lesion regions only). On a large and diverse full-field digital mammography (FFDM) testing dataset with 785 cases (347 negative and 438 cancer cases with masses only), we ran our lesion-based and case-based CAD schemes "as is" on the whole dataset. To assess the supplementary information provided by the global features, we used an adaptive cueing method to adaptively adjust the original CAD-generated detection scores (Sorg) of a detected suspicious mass region based on the computed case-based score (Scase) of the case associated with this detected region. Using the adaptive cueing method, better sensitivity results were obtained at lower FP rates (<= 1 FP per image). Namely, increases of sensitivities (in the FROC curves) of up to 6.7% and 8.2% were obtained for the ROI and Case-based results, respectively.

Reveal Listeria 2.0 test for detection of Listeria spp. in foods and environmental samples.

PubMed

Alles, Susan; Curry, Stephanie; Almy, David; Jagadeesan, Balamurugan; Rice, Jennifer; Mozola, Mark

2012-01-01

A Performance Tested Method validation study was conducted for a new lateral flow immunoassay (Reveal Listeria 2.0) for detection of Listeria spp. in foods and environmental samples. Results of inclusivity testing showed that the test detects all species of Listeria, with the exception of L. grayi. In exclusivity testing conducted under nonselective growth conditions, all non-listeriae tested produced negative Reveal assay results, except for three strains of Lactobacillus spp. However, these lactobacilli are inhibited by the selective Listeria Enrichment Single Step broth enrichment medium used with the Reveal method. Six foods were tested in parallel by the Reveal method and the U.S. Food and Drug Administration/Bacteriological Analytical Manual (FDA/BAM) reference culture procedure. Considering data from both internal and independent laboratory trials, overall sensitivity of the Reveal method relative to that of the FDA/BAM procedure was 101%. Four foods were tested in parallel by the Reveal method and the U.S. Department of Agriculture-Food Safety and Inspection Service (USDA-FSIS) reference culture procedure. Overall sensitivity of the Reveal method relative to that of the USDA-FSIS procedure was 98.2%. There were no statistically significant differences in the number of positives obtained by the Reveal and reference culture procedures in any food trials. In testing of swab or sponge samples from four types of environmental surfaces, sensitivity of Reveal relative to that of the USDA-FSIS reference culture procedure was 127%. For two surface types, differences in the number of positives obtained by the Reveal and reference methods were statistically significant, with more positives by the Reveal method in both cases. Specificity of the Reveal assay was 100%, as there were no unconfirmed positive results obtained in any phase of the testing. Results of ruggedness experiments showed that the Reveal assay is tolerant of modest deviations in test sample volume and device incubation time.

Development of porous titanium for biomedical applications: A comparison between loose sintering and space-holder techniques.

PubMed

Torres, Yadir; Lascano, Sheila; Bris, Jorge; Pavón, Juan; Rodriguez, José A

2014-04-01

One of the most important concerns in long-term prostheses is bone resorption as a result of the stress shielding due to stiffness mismatch between bone and implant. The aim of this study was to obtain porous titanium with stiffness values similar to that exhibited by cortical bone. Porous samples of commercial pure titanium grade-4 were obtained by following both loose-sintering processing and space-holder technique with NaCl between 40 and 70% in volume fraction. Both mechanical properties and porosity morphology were assessed. Young's modulus was measured using uniaxial compression testing, as well as ultrasound methodology. Complete characterization and mechanical testing results allowed us to determine some important findings: (i) optimal parameters for both processing routes; (ii) better mechanical response was obtained by using space-holder technique; (iii) pore geometry of loose sintering samples becomes more regular with increasing sintering temperature; in the case of the space-holder technique that trend was observed for decreasing volume fraction; (iv) most reliable Young's modulus measurements were achieved by ultrasound technique. Copyright © 2013 Elsevier B.V. All rights reserved.

Performance and Self-Consistency of the Generalized Dielectric Dependent Hybrid Functional

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brawand, Nicholas P.; Govoni, Marco; Vörös, Márton

Here, we analyze the performance of the recently proposed screened exchange constant functional (SX) on the GW100 test set, and we discuss results obtained at different levels of self-consistency. The SX functional is a generalization of dielectric dependent hybrid functionals to finite systems; it is nonempirical and depends on the average screening of the exchange interaction. We compare results for ionization potentials obtained with SX to those of CCSD(T) calculations and experiments, and we find excellent agreement, on par with recent state of the art methods based on many body perturbation theory. Applying SX perturbatively to correct PBE eigenvalues yieldsmore » improved results in most cases, except for ionic molecules, for which wave function self-consistency is instead crucial. Calculations where wave functions and the screened exchange constant (α SX) are determined self-consistently, and those where α SX is fixed to the value determined within PBE, yield results of comparable accuracy. Perturbative G 0W 0 corrections of eigenvalues obtained with self-consistent αSX are small on average, for all molecules in the GW100 test set.« less

Performance and Self-Consistency of the Generalized Dielectric Dependent Hybrid Functional

DOE PAGES

Brawand, Nicholas P.; Govoni, Marco; Vörös, Márton; ...

2017-05-24

Here, we analyze the performance of the recently proposed screened exchange constant functional (SX) on the GW100 test set, and we discuss results obtained at different levels of self-consistency. The SX functional is a generalization of dielectric dependent hybrid functionals to finite systems; it is nonempirical and depends on the average screening of the exchange interaction. We compare results for ionization potentials obtained with SX to those of CCSD(T) calculations and experiments, and we find excellent agreement, on par with recent state of the art methods based on many body perturbation theory. Applying SX perturbatively to correct PBE eigenvalues yieldsmore » improved results in most cases, except for ionic molecules, for which wave function self-consistency is instead crucial. Calculations where wave functions and the screened exchange constant (α SX) are determined self-consistently, and those where α SX is fixed to the value determined within PBE, yield results of comparable accuracy. Perturbative G 0W 0 corrections of eigenvalues obtained with self-consistent αSX are small on average, for all molecules in the GW100 test set.« less

Power modulation based fiber-optic loop-sensor having a dual measurement range

NASA Astrophysics Data System (ADS)

Nguyen, Nguyen Q.; Gupta, Nikhil

2009-08-01

A fiber-optic sensor is investigated in this work for potential applications in structural health monitoring. The sensor, called fiber-loop-sensor, is based on bending an optical fiber beyond a critical radius to obtain intensity losses and calibrating the losses with respect to the applied force or displacement. Additionally, in the present case, the use of single-mode optical fibers allows the appearance of several resonance peaks in the transmitted power-displacement graph. The intensity of one of these resonances can be tracked in a narrow range to obtain high sensitivity. Experimental results show that the resolution of 10-4 N for force and 10-5 m for displacement can be obtained in these sensors. The sensors are calibrated for various loop radii and for various loading rates. They are also tested under loading-unloading conditions for over 104 cycles to observe their fatigue behavior. The sensors show very repeatable response and no degradation in performance under these test conditions. Simple construction and instrumentation, high sensitivity, and low cost are the advantages of these sensors.

Velocity and void distribution in a counter-current two-phase flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabriel, S.; Schulenberg, T.; Laurien, E.

2012-07-01

Different flow regimes were investigated in a horizontal channel. Simulating a hot leg injection in case of a loss of coolant accident or flow conditions in reflux condenser mode, the hydraulic jump and partially reversed flow were identified as major constraints for a high amount of entrained water. Trying to simulate the reflux condenser mode, the test section now includes an inclined section connected to a horizontal channel. The channel is 90 mm high and 110 mm wide. Tests were carried out for water and air at ambient pressure and temperature. High speed video-metry was applied to obtain velocities frommore » flow pattern maps of the rising and falling fluid. In the horizontal part of the channel with partially reversed flow the fluid velocities were measured by planar particle image velocimetry. To obtain reliable results for the gaseous phase, this analysis was extended by endoscope measurements. Additionally, a new method based on the optical refraction at the interface between air and water in a back-light was used to obtain time-averaged void fraction. (authors)« less

[Importance of the detection of dysphagia in geriatric patients].

PubMed

Zamora Mur, A; Palacín Ariño, C; Guardia Contreras, A I; Zamora Catevilla, A; Clemente Roldán, E; Santaliestra Grau, J

2018-04-01

Oropharyngeal dysphagia is one of the lesser known geriatric syndromes, despite its enormous impact on functional capacity, quality of life, and health of those affected. A descriptive and prospective study was conducted by the Geriatric Department of Barbastro Hospital (Huesca), from March 2012 to October 2014, as biannual and annual reviews in October 2015. This study included all patients on whom a volume-viscosity clinical examination (MECV-V test) was performed to suspecting dysphagia. The study included 266 patients with a mean age of 82.35±12.3 years, and with a mean Barthel index score of 20.5±25.4, and mean Charlson index of 1.77±1.6. The test was performed in 105 cases after stroke (40%), 53 in dementia (20%), 24 in Parkinsonism (9%), and for other different reasons in 80 (31%). Dysphagia was diagnosed in 228 (86%) cases. Enteral nutrition was given in 25 (10.9%) cases. The test results were shown in the discharge report in 45% of the tests with positive result. The mean survival obtained after test in the patients who died was 230.8±256.5 days. Differences in survival at 12 months were found in patients with positive test, without finding a clear relationship with functional status and comorbidity. Dysphagia has a significant mortality, and the use of thickeners after its detection should be properly reported. Copyright © 2017 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España, S.L.U. All rights reserved.

Dosimetry of a Small-Animal Irradiation Model using a 6 MV Linear Accelerator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fitch, F. Moran; Martinez-Davalos, A.; Garcia-Garduno, O. A.

2010-12-07

A custom made rat-like phantom was used to measure dose distributions using a 6 MV linear accelerator. The phantom has air cavities that simulate the lungs and cylindrical inserts that simulate the backbone. The calculated dose distributions were obtained with the BrainScan v.5.31 TPS software. For the irradiation two cases were considered: (a) near the region where the phantom has two air cavities that simulate the lungs, and (b) with an entirely uniform phantom. The treatment plan consisted of two circular cone arcs that imparted a 500 cGy dose to a simulated lesion in the backbone. We measured dose distributionsmore » using EBT2 GafChromic film and an Epson Perfection V750 scanner working in transmission mode. Vertical and horizontal profiles, isodose curves from 50 to 450 cGy, dose and distance to agreement (DTA) histograms and Gamma index were obtained to compare the dose distributions using DoseLab v4.11. As a result, these calculations show very good agreement between calculated and measured dose distribution in both cases. With a 2% 2 mm criteria 100% of the points pass the Gamma test for the uniform case, while 98.9% of the points do it for the lungs case.« less

Integrating toxicogenomics into human health risk assessment: lessons learned from the benzo[a]pyrene case study.

PubMed

Chepelev, Nikolai L; Moffat, Ivy D; Labib, Sarah; Bourdon-Lacombe, Julie; Kuo, Byron; Buick, Julie K; Lemieux, France; Malik, Amal I; Halappanavar, Sabina; Williams, Andrew; Yauk, Carole L

2015-01-01

The use of short-term toxicogenomic tests to predict cancer (or other health effects) offers considerable advantages relative to traditional toxicity testing methods. The advantages include increased throughput, increased mechanistic data, and significantly reduced costs. However, precisely how toxicogenomics data can be used to support human health risk assessment (RA) is unclear. In a companion paper ( Moffat et al. 2014 ), we present a case study evaluating the utility of toxicogenomics in the RA of benzo[a]pyrene (BaP), a known human carcinogen. The case study is meant as a proof-of-principle exercise using a well-established mode of action (MOA) that impacts multiple tissues, which should provide a best case example. We found that toxicogenomics provided rich mechanistic data applicable to hazard identification, dose-response analysis, and quantitative RA of BaP. Based on this work, here we share some useful lessons for both research and RA, and outline our perspective on how toxicogenomics can benefit RA in the short- and long-term. Specifically, we focus on (1) obtaining biologically relevant data that are readily suitable for establishing an MOA for toxicants, (2) examining the human relevance of an MOA from animal testing, and (3) proposing appropriate quantitative values for RA. We describe our envisioned strategy on how toxicogenomics can become a tool in RA, especially when anchored to other short-term toxicity tests (apical endpoints) to increase confidence in the proposed MOA, and emphasize the need for additional studies on other MOAs to define the best practices in the application of toxicogenomics in RA.

Space shuttle nonmetallic materials age life prediction

NASA Technical Reports Server (NTRS)

Mendenhall, G. D.; Hassell, J. A.; Nathan, R. A.

1975-01-01

The chemiluminescence from samples of polybutadiene, Viton, Teflon, Silicone, PL 731 Adhesive, and SP 296 Boron-Epoxy composite was measured at temperatures from 25 to 150 C. Excellent correlations were obtained between chemiluminescence and temperature. These correlations serve to validate accelerated aging tests (at elevated temperatures) designed to predict service life at lower temperatures. In most cases, smooth or linear correlations were obtained between chemiluminescence and physical properties of purified polymer gums, including the tensile strength, viscosity, and loss tangent. The latter is a complex function of certain polymer properties. Data were obtained with far greater ease by the chemiluminescence technique than by the conventional methods of study. The chemiluminescence from the Teflon (Halon) samples was discovered to arise from trace amounts of impurities, which were undetectable by conventional, destructive analysis of the sample.

DSMC Simulations of Hypersonic Flows and Comparison With Experiments

NASA Technical Reports Server (NTRS)

Moss, James N.; Bird, Graeme A.; Markelov, Gennady N.

2004-01-01

This paper presents computational results obtained with the direct simulation Monte Carlo (DSMC) method for several biconic test cases in which shock interactions and flow separation-reattachment are key features of the flow. Recent ground-based experiments have been performed for several biconic configurations, and surface heating rate and pressure measurements have been proposed for code validation studies. The present focus is to expand on the current validating activities for a relatively new DSMC code called DS2V that Bird (second author) has developed. Comparisons with experiments and other computations help clarify the agreement currently being achieved between computations and experiments and to identify the range of measurement variability of the proposed validation data when benchmarked with respect to the current computations. For the test cases with significant vibrational nonequilibrium, the effect of the vibrational energy surface accommodation on heating and other quantities is demonstrated.

Parallel Unsteady Turbopump Simulations for Liquid Rocket Engines

NASA Technical Reports Server (NTRS)

Kiris, Cetin C.; Kwak, Dochan; Chan, William

2000-01-01

This paper reports the progress being made towards complete turbo-pump simulation capability for liquid rocket engines. Space Shuttle Main Engine (SSME) turbo-pump impeller is used as a test case for the performance evaluation of the MPI and hybrid MPI/Open-MP versions of the INS3D code. Then, a computational model of a turbo-pump has been developed for the shuttle upgrade program. Relative motion of the grid system for rotor-stator interaction was obtained by employing overset grid techniques. Time-accuracy of the scheme has been evaluated by using simple test cases. Unsteady computations for SSME turbo-pump, which contains 136 zones with 35 Million grid points, are currently underway on Origin 2000 systems at NASA Ames Research Center. Results from time-accurate simulations with moving boundary capability, and the performance of the parallel versions of the code will be presented in the final paper.

[A case of acquired immunodeficiency syndrome with ileocecal ulcer].

PubMed

Iwasaki, Tetsuyoshi; Saruta, Masayuki; Sawada, Ryoichi; Ide, Daisuke; Arihiro, Seiji; Matsuoka, Mika; Katoh, Tomohiro; Tajiri, Hisao

2015-10-01

We report a case of a patient with acquired immunodeficiency syndrome (AIDS) and ileocecal ulcer. A 31-year-old man was admitted with chief complaints of decreased body weight and abdominal pain. Colonoscopy revealed a round punched-out ulcer on the ileocecal valve. Initially, we suspected entero-Behçet's disease and simple ulcer as the cause of the ileocecal ulcer. However, after histologic examination of tissue biopsies obtained during colonoscopy, we diagnosed the patient as having cytomegalovirus (CMV) enteritis. Based on the patient's white blood cell depletion and CMV enteritis, we performed a human immunodeficiency virus (HIV) antibody test. The test was positive, and the diagnosis of AIDS was established. The number of patients with AIDS has been increasing in Japan; thus, we should consider the possibility of CMV enteritis and AIDS in young adult patients affected by ileocecal ulcer with no notable history.

Development and tests of x-ray multifoil optical system for 1D imaging (Conference Presentation)

NASA Astrophysics Data System (ADS)

Pína, Ladislav; Hudec, René; Inneman, Adolf J.; Baca, Tomas; Blazek, M.; Platkevic, M.; Sieger, Ladislav; Doubravova, Daniela; McEntaffer, Randall L.; Schultz, Ted B.; Dániel, Vladimír.

2016-09-01

The proposed wide-field optical system has not been used yet. Described novel approach is based on the use of 1D "Lobster eye" optics in combination with Timepix X-ray detector in the energy range 3 - 40 keV. The proposed project includes theoretical study and a functional sample of the Timepix X-ray detector with multifoil wide-field X-ray "Lobster eye" optics. Using optics to focus X-rays on a detector is necessary in cases where the intensity of impinging X-ray radiation is below the sensitivity of the detector without optic. Generally this is the case of very low light phenomena, or e.g. monitoring astrophysical objects in space. Namely, such optical system could find applications in laboratory spectroscopy systems or in a rocket space experiment. Designed wide-field optical system combined with Timepix X-ray detector is described together with experimental results obtained during laboratory tests.

Effect of the Jigsaw-Based Cooperative Learning Method on Student Performance in the General Certificate of Education Advanced-Level Psychology: An Exploratory Brunei Case Study

ERIC Educational Resources Information Center

Azmin, Nur Hafizah

2016-01-01

The mixed-methods study investigated the effect of the jigsaw cooperative learning method on student performance in psychology and their views towards it. Experimental data were obtained via pre-and-post tests and an open-ended questionnaire from 16 conveniently selected students at one Sixth Form College in Brunei. Moreover, the participants…

Detectability of Delaminations in Solid Rocket Motors with Embedded Stress Sensors

DTIC Science & Technology

2011-10-14

composite grain of hydroxyl-terminated polybutadiene/ammonium perchlorate (HTPB/AP). The insulation layer is ethylene propylene diene monomer ( EPDM ...The temperature-dependent mechanical properties of HTPB/AP and EPDM were obtained from in-house testing at AFRL/RZSM (Edwards AFB). The motor case is...temperature (DBST) sensors and Greg Yandek of AFRL/RZSM for the data collection of EPDM insulation material. Distribution A: Approved for public

A study on the application of Fourier series in IMRT treatment planning.

PubMed

Almeida-Trinidad, R; Garnica-Garza, H M

2007-12-01

In intensity-modulated radiotherapy, a set of x-ray fluence profiles is iteratively adjusted until a desired absorbed dose distribution is obtained. The purpose of this article is to present a method that allows the optimization of fluence profiles based on the Fourier series decomposition of an initial approximation to the profile. The method has the advantage that a new fluence profile can be obtained in a precise and controlled way with the tuning of only two parameters, namely the phase of the sine and cosine terms of one of the Fourier components, in contrast to the point-by-point tuning of the profile. Also, because the method uses analytical functions, the resultant profiles do not exhibit numerical artifacts. A test case consisting of a mathematical phantom with a target wrapped around a critical structure is discussed to illustrate the algorithm. It is shown that the degree of conformality of the absorbed dose distribution can be tailored by varying the number of Fourier terms made available to the optimization algorithm. For the test case discussed here, it is shown that the number of Fourier terms to be modified depends on the number of radiation beams incident on the target but it is in general in the order of 10 terms.

Two treatment methods for stormwater sediments--pilot plant and landfarming--and reuse of the treated sediments in civil engineering.

PubMed

Petavy, F; Ruban, V; Conil, P; Viau, J Y; Auriol, J C

2009-07-01

The aim of this research was to present a pilot plant for the treatment of stormwater sediments and to compare the decontamination rate to that obtained by landfarming. The possibilities for reuse of the treated sediments in civil engineering are also studied. Four sediments from retention/infiltration ponds or from street sweeping were studied. In each case organic matter (OM), total hydrocarbons (TH) and polycyclic aromatic hydrocarbons (PAH) were measured. Geotechnical tests were carried out to evaluate the reuse possibilities of the treated sediments. Treatment by means of the pilot plant was efficient at reducing TH and PAH concentrations: THs were reduced by 53-97% and PAHs were decreased by 60-95%. By comparison, a reduction of 45-75% in TH concentration is obtained with landfarming, whereas there is no significant decrease in PAHs. Furthermore, geotechnical tests showed that the treated fractions from the pilot plant can be reused as road embankments and as a capping layer. These results are most encouraging and show that stormwater sediments can valuably be reused after treatment in a pilot plant. Landfarming is less efficient but this technique could be used as a pretreatment in the case of high TH pollution.

Non-Linear Harmonic flow simulations of a High-Head Francis Turbine test case

NASA Astrophysics Data System (ADS)

Lestriez, R.; Amet, E.; Tartinville, B.; Hirsch, C.

2016-11-01

This work investigates the use of the non-linear harmonic (NLH) method for a high- head Francis turbine, the Francis99 workshop test case. The NLH method relies on a Fourier decomposition of the unsteady flow components in harmonics of Blade Passing Frequencies (BPF), which are the fundamentals of the periodic disturbances generated by the adjacent blade rows. The unsteady flow solution is obtained by marching in pseudo-time to a steady-state solution of the transport equations associated with the time-mean, the BPFs and their harmonics. Thanks to this transposition into frequency domain, meshing only one blade channel is sufficient, like for a steady flow simulation. Notable benefits in terms of computing costs and engineering time can therefore be obtained compared to classical time marching approach using sliding grid techniques. The method has been applied for three operating points of the Francis99 workshop high-head Francis turbine. Steady and NLH flow simulations have been carried out for these configurations. Impact of the grid size and near-wall refinement is analysed on all operating points for steady simulations and for Best Efficiency Point (BEP) for NLH simulations. Then, NLH results for a selected grid size are compared for the three different operating points, reproducing the tendencies observed in the experiment.

Calculation of forces on magnetized bodies using COSMIC NASTRAN

NASA Technical Reports Server (NTRS)

Sheerer, John

1987-01-01

The methods described may be used with a high degree of confidence for calculations of magnetic traction forces normal to a surface. In this circumstance all models agree, and test cases have resulted in theoretically correct results. It is shown that the tangential forces are in practice negligible. The surface pole method is preferable to the virtual work method because of the necessity for more than one NASTRAN run in the latter case, and because distributed forces are obtained. The derivation of local forces from the Maxwell stress method involves an undesirable degree of manipulation of the problem and produces a result in contradiction of the surface pole method.

Retrieving the aerosol lidar ratio profile by combining ground- and space-based elastic lidars.

PubMed

Feiyue, Mao; Wei, Gong; Yingying, Ma

2012-02-15

The aerosol lidar ratio is a key parameter for the retrieval of aerosol optical properties from elastic lidar, which changes largely for aerosols with different chemical and physical properties. We proposed a method for retrieving the aerosol lidar ratio profile by combining simultaneous ground- and space-based elastic lidars. The method was tested by a simulated case and a real case at 532 nm wavelength. The results demonstrated that our method is robust and can obtain accurate lidar ratio and extinction coefficient profiles. Our method can be useful for determining the local and global lidar ratio and validating space-based lidar datasets.

Automatic computation of the travelling wave solutions to nonlinear PDEs

NASA Astrophysics Data System (ADS)

Liang, Songxin; Jeffrey, David J.

2008-05-01

Various extensions of the tanh-function method and their implementations for finding explicit travelling wave solutions to nonlinear partial differential equations (PDEs) have been reported in the literature. However, some solutions are often missed by these packages. In this paper, a new algorithm and its implementation called TWS for solving single nonlinear PDEs are presented. TWS is implemented in MAPLE 10. It turns out that, for PDEs whose balancing numbers are not positive integers, TWS works much better than existing packages. Furthermore, TWS obtains more solutions than existing packages for most cases. Program summaryProgram title:TWS Catalogue identifier:AEAM_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAM_v1_0.html Program obtainable from:CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions:Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.:1250 No. of bytes in distributed program, including test data, etc.:78 101 Distribution format:tar.gz Programming language:Maple 10 Computer:A laptop with 1.6 GHz Pentium CPU Operating system:Windows XP Professional RAM:760 Mbytes Classification:5 Nature of problem:Finding the travelling wave solutions to single nonlinear PDEs. Solution method:Based on tanh-function method. Restrictions:The current version of this package can only deal with single autonomous PDEs or ODEs, not systems of PDEs or ODEs. However, the PDEs can have any finite number of independent space variables in addition to time t. Unusual features:For PDEs whose balancing numbers are not positive integers, TWS works much better than existing packages. Furthermore, TWS obtains more solutions than existing packages for most cases. Additional comments:It is easy to use. Running time:Less than 20 seconds for most cases, between 20 to 100 seconds for some cases, over 100 seconds for few cases. References: [1] E.S. Cheb-Terrab, K. von Bulow, Comput. Phys. Comm. 90 (1995) 102. [2] S.A. Elwakil, S.K. El-Labany, M.A. Zahran, R. Sabry, Phys. Lett. A 299 (2002) 179. [3] E. Fan, Phys. Lett. 277 (2000) 212. [4] W. Malfliet, Amer. J. Phys. 60 (1992) 650. [5] W. Malfliet, W. Hereman, Phys. Scripta 54 (1996) 563. [6] E.J. Parkes, B.R. Duffy, Comput. Phys. Comm. 98 (1996) 288.

An analysis of sound absorbing linings for the interior of the NASA Ames 80 x 120-foot wind tunnel

NASA Technical Reports Server (NTRS)

Wilby, J. F.; White, P. H.

1985-01-01

It is desirable to achieve low frequency sound absorption in the tests section of the NASA Ames 80X120-ft wind tunnel. However, it is difficult to obtain information regarding sound absorption characteristics of potential treatments because of the restrictions placed on the dimensions of the test chambers. In the present case measurements were made in a large enclosure for aircraft ground run-up tests. The normal impedance of the acoustic treatment was measured using two microphones located close to the surface of the treatment. The data showed reasonably good agreement with analytical methods which were then used to design treatments for the wind tunnel test section. A sound-absorbing lining is proposed for the 80X120-ft wind tunnel.

Clinical experience of CGC tablet (Cysteine, vitamin C) in the patients treated with radiation. I (in Japanese)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kinoshita, F.; Maekawa, Z.

1973-03-01

Three tablets of CGC, which is a mixture of cysteine and vitamin C, were given orally three times a day to the patients with malignant neoplasms immediately before irradiation. Reduction of side effects is discussed. As side effects, subjective symptoms, blood findings, liver function test, and effects on therapeutic response were observed. Diseases of the patients (a total of 27 cases) were as follows: eight cases of breast cancer, seven of cervical uterus cancer, three of eosophagus cancer, two of myoma uteri, and each one case of lung cancer, penis cancer, brain neoplasms, duodenum cancer, rectal cancer, osteosarcoma of themore » pelvis, and orchis cancer. The mean leukocyte count dropped from 5500 before irradiation to 4600 after irradiation. There were two cases of which leukocyte count was less than 3000, but its count recovered more than 4000 in ten days after termination of irradiation. The mean red blood cell count increased from 3,440,000 before irradiation to 3,480,000 after irradiation. The mean amount of hemoglobin increased from 75% before irradiation to 76% after irradiation. There was no case in which examination results of liver function test before irradiation took a bad turn after irradiation. All 27 cases were given prearranged dose within a fixed period, and expected effects of radiotherapy were obtained. Furthermore, symptoms and treatment progress of each case administered with CGC were explained. (JA)« less

Influence of bitumen type on cracking resistance of asphalt mixtures used in pavement overlays

NASA Astrophysics Data System (ADS)

Jaskula, P.; Szydlowski, C.; Stienss, M.

2018-05-01

Cracking is one of the predominant distresses occurring in flexible pavements, especially in old pavements that were rehabilitated with an asphalt overlay. In such cases asphalt mixtures should be designed to ensure high resistance to reflective cracking because new asphalt layers are exposed to existing cracks of the old pavement. The nature of these cracks can be various (transverse, longitudinal as well as crazy cracking). One factor that minimizes this type of distress is the proper mix design process, which should involve selection of specific bitumen binder and mineral mix gradation. However, still there is no universally adopted laboratory test method that would allow to clearly assess resistance of asphalt mixtures to reflective cracking. This paper describes the usage of one of the devices developed to test asphalt mixtures in terms of such distress – Texas Overlay Tester. For this test, samples prepared in laboratory conditions (i.e. compacted with the use of Superpave Gyratory Compactor) as well as obtained in the field (by core drilling) can be used. The results are obtained not only quickly and easily, but also with sufficient repeatability. The described method characterizes both crack initiation and crack propagation properties of asphalt mixtures. In this work one type of mineral mixture was tested with 4 different types of bitumen (one neat bitumen, two ordinary polymer-modified and one polymer-modified with high polymer content). For selected cases extra additives (rubber and loose fibres) were also tested. In total, six asphalt mixtures were tested. A ranking of the used binders was created on the basis of the results in order to conclude which bitumen would ensure the best performance characteristics in terms of reflective cracking. The results have clearly shown that deliberate choice of the binder used in the asphalt mixture for the overlay will significantly improve its reflective cracking resistance or even fatigue resistance.

Effective assessment of egfr mutation status in bronchoalveolar lavage and pleural fluids by next-generation sequencing.

PubMed

Buttitta, Fiamma; Felicioni, Lara; Del Grammastro, Maela; Filice, Giampaolo; Di Lorito, Alessia; Malatesta, Sara; Viola, Patrizia; Centi, Irene; D'Antuono, Tommaso; Zappacosta, Roberta; Rosini, Sandra; Cuccurullo, Franco; Marchetti, Antonio

2013-02-01

The therapeutic choice for patients with lung adenocarcinoma depends on the presence of EGF receptor (EGFR) mutations. In many cases, only cytologic samples are available for molecular diagnosis. Bronchoalveolar lavage (BAL) and pleural fluid, which represent a considerable proportion of cytologic specimens, cannot always be used for molecular testing because of low rate of tumor cells. We tested the feasibility of EGFR mutation analysis on BAL and pleural fluid samples by next-generation sequencing (NGS), an innovative and extremely sensitive platform. The study was devised to extend the EGFR test to those patients who could not get it due to the paucity of biologic material. A series of 830 lung cytology specimens was used to select 48 samples (BAL and pleural fluid) from patients with EGFR mutations in resected tumors. These samples included 36 cases with 0.3% to 9% of neoplastic cells (series A) and 12 cases without evidence of tumor (series B). All samples were analyzed by Sanger sequencing and NGS on 454 Roche platform. A mean of 21,130 ± 2,370 sequences per sample were obtained by NGS. In series A, EGFR mutations were detected in 16% of cases by Sanger sequencing and in 81% of cases by NGS. Seventy-seven percent of cases found to be negative by Sanger sequencing showed mutations by NGS. In series B, all samples were negative for EGFR mutation by Sanger sequencing whereas 42% of them were positive by NGS. The very sensitive EGFR-NGS assay may open up to the possibility of specific treatments for patients otherwise doomed to re-biopsies or nontargeted therapies.

Relationship between fumonisin contamination of feed and mystery swine disease. A case-control study.

PubMed

Bane, D P; Neumann, E J; Hall, W F; Harlin, K S; Slife, R L

1992-02-01

Fumonisin is a recently identified mycotoxin that has been shown to be the cause of pulmonary edema disease in swine and leukoencephalomalacia in horses. Mystery Swine Disease (MSD), is an economically devastating disease complex of unknown etiology that has been reported to have occurred in several swine producing states since 1988. To determine the relationship between MSD and fumonisin, a case-control study was carried out in Illinois in mid-1990. Feed samples collected from 12 case and 9 control farms were analyzed for fumonisin. Sera from swine on all farms was screened for titers against encephalomyocarditis (EMC) virus and concentrations of alpha-1 acid glycoprotein (an acute phase reactive protein). Fumonisin concentrations greater than or equal to 20 ppm were found on 1 control farm (1/9) and 8 case farms (8/12). Titers against EMC virus (greater than or equal to 1:16) were found on 5 control farms (5/9) and on 6 case farms (6/12). Farms with greater than or equal to 20 ppm fumonisin in the feed were at significantly increased risk (OR = 11.2, Fisher's exact test p = 0.037) for MSD. Furthermore, the pi2 test for trend was (p = 0.017), meaning that as the level of fumonisin in the feed increased, the risk of MSD also increased. The presence of EMC virus titers in the sow herd was not a significant risk for MSD (OR = 1.25, Fisher's exact test p = 0.75). Alpha-1 acid glycoprotein concentrations obtained from a 2-week old nursing pigs differed significantly (p = 0.0005) between MSD case and control herds.

The development and preliminary effectiveness of a nursing case management e-learning program.

PubMed

Liu, Wen-I; Chu, Kuo-Chung; Chen, Shing-Chia

2014-07-01

The purpose of this article was to describe the development and preliminary effectiveness of a digital case management education program. The e-learning program was built through the collaboration of a nurse educator and an informatics professor. The program was then developed according to the following steps: (1) building a visual interface, (2) scripting each unit, (3) preparing the course material and assessment tests, (4) using teaching software to record audio and video courses, (5) editing the audio recordings, (6) using instructional media or hyperlinks to finalize the interactions, (7) creating the assessment and obtaining feedback, and (8) testing the overall operation. The digital program consisted of five learning modules, self-assessment questions, learning cases, sharing experiences, and learning resources. Forty nurses participated in this study and fully completed the questionnaires both before and after the program. The knowledge and confidence levels in the experimental group were significantly higher over time than those of the comparison group. The results supported the use of educational technology to provide a more flexible and effective presentation method for continuing education programs.

Computation of turbulent boundary layers employing the defect wall-function method. M.S. Thesis

NASA Technical Reports Server (NTRS)

Brown, Douglas L.

1994-01-01

In order to decrease overall computational time requirements of spatially-marching parabolized Navier-Stokes finite-difference computer code when applied to turbulent fluid flow, a wall-function methodology, originally proposed by R. Barnwell, was implemented. This numerical effort increases computational speed and calculates reasonably accurate wall shear stress spatial distributions and boundary-layer profiles. Since the wall shear stress is analytically determined from the wall-function model, the computational grid near the wall is not required to spatially resolve the laminar-viscous sublayer. Consequently, a substantially increased computational integration step size is achieved resulting in a considerable decrease in net computational time. This wall-function technique is demonstrated for adiabatic flat plate test cases from Mach 2 to Mach 8. These test cases are analytically verified employing: (1) Eckert reference method solutions, (2) experimental turbulent boundary-layer data of Mabey, and (3) finite-difference computational code solutions with fully resolved laminar-viscous sublayers. Additionally, results have been obtained for two pressure-gradient cases: (1) an adiabatic expansion corner and (2) an adiabatic compression corner.

Search for CP violation in the phase space of D0 → π+π-π+π- decays

NASA Astrophysics Data System (ADS)

Aaij, R.; Adeva, B.; Adinolfi, M.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Alvarez Cartelle, P.; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Andreassi, G.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Archilli, F.; d'Argent, P.; Arnau Romeu, J.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Babuschkin, I.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baker, S.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Baszczyk, M.; Batozskaya, V.; Batsukh, B.; Battista, V.; Bay, A.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Bel, L. J.; Bellee, V.; Belloli, N.; Belous, K.; Belyaev, I.; Ben-Haim, E.; Bencivenni, G.; Benson, S.; Benton, J.; Berezhnoy, A.; Bernet, R.; Bertolin, A.; Betancourt, C.; Betti, F.; Bettler, M.-O.; van Beuzekom, M.; Bezshyiko, Ia.; Bifani, S.; Billoir, P.; Bird, T.; Birnkraut, A.; Bitadze, A.; Bizzeti, A.; Blake, T.; Blanc, F.; Blouw, J.; Blusk, S.; Bocci, V.; Boettcher, T.; Bondar, A.; Bondar, N.; Bonivento, W.; Bordyuzhin, I.; Borgheresi, A.; Borghi, S.; Borisyak, M.; Borsato, M.; Bossu, F.; Boubdir, M.; Bowcock, T. J. V.; Bowen, E.; Bozzi, C.; Braun, S.; Britsch, M.; Britton, T.; Brodzicka, J.; Buchanan, E.; Burr, C.; Bursche, A.; Buytaert, J.; Cadeddu, S.; Calabrese, R.; Calvi, M.; Calvo Gomez, M.; Camboni, A.; Campana, P.; Campora Perez, D. H.; Capriotti, L.; Carbone, A.; Carboni, G.; Cardinale, R.; Cardini, A.; Carniti, P.; Carson, L.; Carvalho Akiba, K.; Casse, G.; Cassina, L.; Castillo Garcia, L.; Cattaneo, M.; Cauet, Ch.; Cavallero, G.; Cenci, R.; Chamont, D.; Charles, M.; Charpentier, Ph.; Chatzikonstantinidis, G.; Chefdeville, M.; Chen, S.; Cheung, S.-F.; Chobanova, V.; Chrzaszcz, M.; Cid Vidal, X.; Ciezarek, G.; Clarke, P. E. L.; Clemencic, M.; Cliff, H. V.; Closier, J.; Coco, V.; Cogan, J.; Cogneras, E.; Cogoni, V.; Cojocariu, L.; Collazuol, G.; Collins, P.; Comerma-Montells, A.; Contu, A.; Cook, A.; Coombs, G.; Coquereau, S.; Corti, G.; Corvo, M.; Costa Sobral, C. M.; Couturier, B.; Cowan, G. A.; Craik, D. C.; Crocombe, A.; Cruz Torres, M.; Cunliffe, S.; Currie, R.; D'Ambrosio, C.; Da Cunha Marinho, F.; Dall'Occo, E.; Dalseno, J.; David, P. N. Y.; Davis, A.; De Aguiar Francisco, O.; De Bruyn, K.; De Capua, S.; De Cian, M.; De Miranda, J. M.; De Paula, L.; De Serio, M.; De Simone, P.; Dean, C.-T.; Decamp, D.; Deckenhoff, M.; Del Buono, L.; Demmer, M.; Dendek, A.; Derkach, D.; Deschamps, O.; Dettori, F.; Dey, B.; Di Canto, A.; Dijkstra, H.; Dordei, F.; Dorigo, M.; Dosil Suárez, A.; Dovbnya, A.; Dreimanis, K.; Dufour, L.; Dujany, G.; Dungs, K.; Durante, P.; Dzhelyadin, R.; Dziurda, A.; Dzyuba, A.; Déléage, N.; Easo, S.; Ebert, M.; Egede, U.; Egorychev, V.; Eidelman, S.; Eisenhardt, S.; Eitschberger, U.; Ekelhof, R.; Eklund, L.; Ely, S.; Esen, S.; Evans, H. M.; Evans, T.; Falabella, A.; Farley, N.; Farry, S.; Fay, R.; Fazzini, D.; Ferguson, D.; Fernandez Prieto, A.; Ferrari, F.; Ferreira Rodrigues, F.; Ferro-Luzzi, M.; Filippov, S.; Fini, R. A.; Fiore, M.; Fiorini, M.; Firlej, M.; Fitzpatrick, C.; Fiutowski, T.; Fleuret, F.; Fohl, K.; Fontana, M.; Fontanelli, F.; Forshaw, D. C.; Forty, R.; Franco Lima, V.; Frank, M.; Frei, C.; Fu, J.; Furfaro, E.; Färber, C.; Gallas Torreira, A.; Galli, D.; Gallorini, S.; Gambetta, S.; Gandelman, M.; Gandini, P.; Gao, Y.; Garcia Martin, L. M.; García Pardiñas, J.; Garra Tico, J.; Garrido, L.; Garsed, P. J.; Gascon, D.; Gaspar, C.; Gavardi, L.; Gazzoni, G.; Gerick, D.; Gersabeck, E.; Gersabeck, M.; Gershon, T.; Ghez, Ph.; Gianì, S.; Gibson, V.; Girard, O. G.; Giubega, L.; Gizdov, K.; Gligorov, V. V.; Golubkov, D.; Golutvin, A.; Gomes, A.; Gorelov, I. V.; Gotti, C.; Grabalosa Gándara, M.; Graciani Diaz, R.; Granado Cardoso, L. A.; Graugés, E.; Graverini, E.; Graziani, G.; Grecu, A.; Griffith, P.; Grillo, L.; Gruberg Cazon, B. R.; Grünberg, O.; Gushchin, E.; Guz, Yu.; Gys, T.; Göbel, C.; Hadavizadeh, T.; Hadjivasiliou, C.; Haefeli, G.; Haen, C.; Haines, S. C.; Hall, S.; Hamilton, B.; Han, X.; Hansmann-Menzemer, S.; Harnew, N.; Harnew, S. T.; Harrison, J.; Hatch, M.; He, J.; Head, T.; Heister, A.; Hennessy, K.; Henrard, P.; Henry, L.; Hernando Morata, J. A.; van Herwijnen, E.; Heß, M.; Hicheur, A.; Hill, D.; Hombach, C.; Hopchev, H.; Hulsbergen, W.; Humair, T.; Hushchyn, M.; Hussain, N.; Hutchcroft, D.; Idzik, M.; Ilten, P.; Jacobsson, R.; Jaeger, A.; Jalocha, J.; Jans, E.; Jawahery, A.; Jiang, F.; John, M.; Johnson, D.; Jones, C. R.; Joram, C.; Jost, B.; Jurik, N.; Kandybei, S.; Kanso, W.; Karacson, M.; Kariuki, J. M.; Karodia, S.; Kecke, M.; Kelsey, M.; Kenyon, I. R.; Kenzie, M.; Ketel, T.; Khairullin, E.; Khanji, B.; Khurewathanakul, C.; Kirn, T.; Klaver, S.; Klimaszewski, K.; Koliiev, S.; Kolpin, M.; Komarov, I.; Koopman, R. F.; Koppenburg, P.; Kosmyntseva, A.; Kozachuk, A.; Kozeiha, M.; Kravchuk, L.; Kreplin, K.; Kreps, M.; Krokovny, P.; Kruse, F.; Krzemien, W.; Kucewicz, W.; Kucharczyk, M.; Kudryavtsev, V.; Kuonen, A. K.; Kurek, K.; Kvaratskheliya, T.; Lacarrere, D.; Lafferty, G.; Lai, A.; Lanfranchi, G.; Langenbruch, C.; Latham, T.; Lazzeroni, C.; Le Gac, R.; van Leerdam, J.; Lees, J.-P.; Leflat, A.; Lefrançois, J.; Lefèvre, R.; Lemaitre, F.; Lemos Cid, E.; Leroy, O.; Lesiak, T.; Leverington, B.; Li, Y.; Likhomanenko, T.; Lindner, R.; Linn, C.; Lionetto, F.; Liu, B.; Liu, X.; Loh, D.; Longstaff, I.; Lopes, J. H.; Lucchesi, D.; Lucio Martinez, M.; Luo, H.; Lupato, A.; Luppi, E.; Lupton, O.; Lusiani, A.; Lyu, X.; Machefert, F.; Maciuc, F.; Maev, O.; Maguire, K.; Malde, S.; Malinin, A.; Maltsev, T.; Manca, G.; Mancinelli, G.; Manning, P.; Maratas, J.; Marchand, J. F.; Marconi, U.; Marin Benito, C.; Marino, P.; Marks, J.; Martellotti, G.; Martin, M.; Martinelli, M.; Martinez Santos, D.; Martinez Vidal, F.; Martins Tostes, D.; Massacrier, L. M.; Massafferri, A.; Matev, R.; Mathad, A.; Mathe, Z.; Matteuzzi, C.; Mauri, A.; Maurin, B.; Mazurov, A.; McCann, M.; McCarthy, J.; McNab, A.; McNulty, R.; Meadows, B.; Meier, F.; Meissner, M.; Melnychuk, D.; Merk, M.; Merli, A.; Michielin, E.; Milanes, D. A.; Minard, M.-N.; Mitzel, D. S.; Mogini, A.; Molina Rodriguez, J.; Monroy, I. A.; Monteil, S.; Morandin, M.; Morawski, P.; Mordà, A.; Morello, M. J.; Moron, J.; Morris, A. B.; Mountain, R.; Muheim, F.; Mulder, M.; Mussini, M.; Müller, D.; Müller, J.; Müller, K.; Müller, V.; Naik, P.; Nakada, T.; Nandakumar, R.; Nandi, A.; Nasteva, I.; Needham, M.; Neri, N.; Neubert, S.; Neufeld, N.; Neuner, M.; Nguyen, A. D.; Nguyen, T. D.; Nguyen-Mau, C.; Nieswand, S.; Niet, R.; Nikitin, N.; Nikodem, T.; Novoselov, A.; O'Hanlon, D. P.; Oblakowska-Mucha, A.; Obraztsov, V.; Ogilvy, S.; Oldeman, R.; Onderwater, C. J. G.; Otalora Goicochea, J. M.; Otto, A.; Owen, P.; Oyanguren, A.; Pais, P. R.; Palano, A.; Palombo, F.; Palutan, M.; Panman, J.; Papanestis, A.; Pappagallo, M.; Pappalardo, L. L.; Parker, W.; Parkes, C.; Passaleva, G.; Pastore, A.; Patel, G. D.; Patel, M.; Patrignani, C.; Pearce, A.; Pellegrino, A.; Penso, G.; Pepe Altarelli, M.; Perazzini, S.; Perret, P.; Pescatore, L.; Petridis, K.; Petrolini, A.; Petrov, A.; Petruzzo, M.; Picatoste Olloqui, E.; Pietrzyk, B.; Pikies, M.; Pinci, D.; Pistone, A.; Piucci, A.; Playfer, S.; Plo Casasus, M.; Poikela, T.; Polci, F.; Poluektov, A.; Polyakov, I.; Polycarpo, E.; Pomery, G. J.; Popov, A.; Popov, D.; Popovici, B.; Poslavskii, S.; Potterat, C.; Price, E.; Price, J. D.; Prisciandaro, J.; Pritchard, A.; Prouve, C.; Pugatch, V.; Puig Navarro, A.; Punzi, G.; Qian, W.; Quagliani, R.; Rachwal, B.; Rademacker, J. H.; Rama, M.; Ramos Pernas, M.; Rangel, M. S.; Raniuk, I.; Ratnikov, F.; Raven, G.; Redi, F.; Reichert, S.; dos Reis, A. C.; Remon Alepuz, C.; Renaudin, V.; Ricciardi, S.; Richards, S.; Rihl, M.; Rinnert, K.; Rives Molina, V.; Robbe, P.; Rodrigues, A. B.; Rodrigues, E.; Rodriguez Lopez, J. A.; Rodriguez Perez, P.; Rogozhnikov, A.; Roiser, S.; Rollings, A.; Romanovskiy, V.; Romero Vidal, A.; Ronayne, J. W.; Rotondo, M.; Rudolph, M. S.; Ruf, T.; Ruiz Valls, P.; Saborido Silva, J. J.; Sadykhov, E.; Sagidova, N.; Saitta, B.; Salustino Guimaraes, V.; Sanchez Mayordomo, C.; Sanmartin Sedes, B.; Santacesaria, R.; Santamarina Rios, C.; Santimaria, M.; Santovetti, E.; Sarti, A.; Satriano, C.; Satta, A.; Saunders, D. M.; Savrina, D.; Schael, S.; Schellenberg, M.; Schiller, M.; Schindler, H.; Schlupp, M.; Schmelling, M.; Schmelzer, T.; Schmidt, B.; Schneider, O.; Schopper, A.; Schubert, K.; Schubiger, M.; Schune, M.-H.; Schwemmer, R.; Sciascia, B.; Sciubba, A.; Semennikov, A.; Sergi, A.; Serra, N.; Serrano, J.; Sestini, L.; Seyfert, P.; Shapkin, M.; Shapoval, I.; Shcheglov, Y.; Shears, T.; Shekhtman, L.; Shevchenko, V.; Siddi, B. G.; Silva Coutinho, R.; Silva de Oliveira, L.; Simi, G.; Simone, S.; Sirendi, M.; Skidmore, N.; Skwarnicki, T.; Smith, E.; Smith, I. T.; Smith, J.; Smith, M.; Snoek, H.; Sokoloff, M. D.; Soler, F. J. P.; Souza De Paula, B.; Spaan, B.; Spradlin, P.; Sridharan, S.; Stagni, F.; Stahl, M.; Stahl, S.; Stefko, P.; Stefkova, S.; Steinkamp, O.; Stemmle, S.; Stenyakin, O.; Stevenson, S.; Stoica, S.; Stone, S.; Storaci, B.; Stracka, S.; Straticiuc, M.; Straumann, U.; Sun, L.; Sutcliffe, W.; Swientek, K.; Syropoulos, V.; Szczekowski, M.; Szumlak, T.; T'Jampens, S.; Tayduganov, A.; Tekampe, T.; Teklishyn, M.; Tellarini, G.; Teubert, F.; Thomas, E.; van Tilburg, J.; Tilley, M. J.; Tisserand, V.; Tobin, M.; Tolk, S.; Tomassetti, L.; Tonelli, D.; Topp-Joergensen, S.; Toriello, F.; Tournefier, E.; Tourneur, S.; Trabelsi, K.; Traill, M.; Tran, M. T.; Tresch, M.; Trisovic, A.; Tsaregorodtsev, A.; Tsopelas, P.; Tully, A.; Tuning, N.; Ukleja, A.; Ustyuzhanin, A.; Uwer, U.; Vacca, C.; Vagnoni, V.; Valassi, A.; Valat, S.; Valenti, G.; Vallier, A.; Vazquez Gomez, R.; Vazquez Regueiro, P.; Vecchi, S.; van Veghel, M.; Velthuis, J. J.; Veltri, M.; Veneziano, G.; Venkateswaran, A.; Vernet, M.; Vesterinen, M.; Viaud, B.; Vieira, D.; Vieites Diaz, M.; Viemann, H.; Vilasis-Cardona, X.; Vitti, M.; Volkov, V.; Vollhardt, A.; Voneki, B.; Vorobyev, A.; Vorobyev, V.; Voß, C.; de Vries, J. A.; Vázquez Sierra, C.; Waldi, R.; Wallace, C.; Wallace, R.; Walsh, J.; Wang, J.; Ward, D. R.; Wark, H. M.; Watson, N. K.; Websdale, D.; Weiden, A.; Whitehead, M.; Wicht, J.; Wilkinson, G.; Wilkinson, M.; Williams, M.; Williams, M. P.; Williams, M.; Williams, T.; Wilson, F. F.; Wimberley, J.; Wishahi, J.; Wislicki, W.; Witek, M.; Wormser, G.; Wotton, S. A.; Wraight, K.; Wyllie, K.; Xie, Y.; Xing, Z.; Xu, Z.; Yang, Z.; Yao, Y.; Yin, H.; Yu, J.; Yuan, X.; Yushchenko, O.; Zarebski, K. A.; Zavertyaev, M.; Zhang, L.; Zhang, Y.; Zhang, Y.; Zhelezov, A.; Zheng, Y.; Zhokhov, A.; Zhu, X.; Zhukov, V.; Zucchelli, S.; LHCb Collaboration

2017-06-01

A search for time-integrated CP violation in the Cabibbo-suppressed decay D0 →π+π-π+π- is performed using an unbinned, model-independent technique known as the energy test. This is the first application of the energy test in four-body decays. The search is performed for P-even CP asymmetries and, for the first time, is extended to probe the P-odd case. Using proton-proton collision data corresponding to an integrated luminosity of 3.0 fb-1 collected by the LHCb detector at centre-of-mass energies of √{ s} = 7 TeV and 8 TeV, the world's best sensitivity to CP violation in this decay is obtained. The data are found to be consistent with the hypothesis of CP symmetry with a p-value of (4.6 ± 0.5)% in the P-even case, and marginally consistent with a p-value of (0.6 ± 0.2)% in the P-odd case, corresponding to a significance for CP non-conservation of 2.7 standard deviations.

Sample preparation composite and replicate strategy case studies for assay of solid oral drug products.

PubMed

Nickerson, Beverly; Harrington, Brent; Li, Fasheng; Guo, Michele Xuemei

2017-11-30

Drug product assay is one of several tests required for new drug products to ensure the quality of the product at release and throughout the life cycle of the product. Drug product assay testing is typically performed by preparing a composite sample of multiple dosage units to obtain an assay value representative of the batch. In some cases replicate composite samples may be prepared and the reportable assay value is the average value of all the replicates. In previously published work by Harrington et al. (2014) [5], a sample preparation composite and replicate strategy for assay was developed to provide a systematic approach which accounts for variability due to the analytical method and dosage form with a standard error of the potency assay criteria based on compendia and regulatory requirements. In this work, this sample preparation composite and replicate strategy for assay is applied to several case studies to demonstrate the utility of this approach and its application at various stages of pharmaceutical drug product development. Copyright © 2017 Elsevier B.V. All rights reserved.

Detection of surface deformation and ionospheric perturbation by the North Korea nuclear test

NASA Astrophysics Data System (ADS)

Park, S. C.; Lee, W. J.; Sohn, D. H.; Lee, D. K.; Jung, H. S.

2017-12-01

We used remote sensing data to detect the changes on surface and ionosphere due to the North Korea nuclear test. To analyze the surface deformation before and after the 6th North Korea (NK) nuclear test, we used Satellite Aperture Radar (SAR) images. It was reported that there were some surface deformation with about 10 cm by the 4th test (Wei, 2017) and the 5th test (Jo, 2017) using Interferometric SAR (InSAR) technique. However we could not obtain surface deformation by the 6th test using InSAR with Advanced Land Observation Satellite 2 (ALOS-2) data because of low coherence in the area close to the epicenter. Although the low coherence can be occurred due to several reasons, the main reason may be large deformation in this particular case. Therefore we applied pixel offset method to measure the amount of surface deformation in the area with low coherence. Pixel offset method calculates the deformation in the directions along track and Line-of-Sight (LOS) using cross correlation of intensity of two SAR images before and after the event for a pixel and is used frequently to obtain large deformation of glacier (e.g. Lee et al., 2015). Applying pixel offset method to the area of the 6th NK nuclear test, we obtained about 3 m surface deformation in maximum. It seems that the larger deformation occurs as the mountain slope is steeper.We then analyzed ionospheric perturbation using Global Navigation Satellite System (GNSS) data. If acoustic wave by a nuclear test goes up to the ionosphere and disturbs electron density, then the changes in slant total electron content (STEC) may be detected by GNSS satellites. STEC perturbation has been reported in the previous NK nuclear tests (e.g. Park et al., 2011). We analyzed the third order derivatives of STEC for 51 GNSS stations in South Korea and found that some perturbation were appeared at 4 stations about 20 40 minutes after the test.

Sex-Biased Parental Investment among Contemporary Chinese Peasants: Testing the Trivers-Willard Hypothesis.

PubMed

Luo, Liqun; Zhao, Wei; Weng, Tangmei

2016-01-01

The Trivers-Willard hypothesis predicts that high-status parents will bias their investment to sons, whereas low-status parents will bias their investment to daughters. Among humans, tests of this hypothesis have yielded mixed results. This study tests the hypothesis using data collected among contemporary peasants in Central South China. We use current family status (rated by our informants) and father's former class identity (assigned by the Chinese Communist Party in the early 1950s) as measures of parental status, and proportion of sons in offspring and offspring's years of education as measures of parental investment. Results show that (i) those families with a higher former class identity such as landlord and rich peasant tend to have a higher socioeconomic status currently, (ii) high-status parents are more likely to have sons than daughters among their biological offspring, and (iii) in higher-status families, the years of education obtained by sons exceed that obtained by daughters to a larger extent than in lower-status families. Thus, the first assumption and the two predictions of the hypothesis are supported by this study. This article contributes a contemporary Chinese case to the testing of the Trivers-Willard hypothesis.

Data for ground-water test hole near Zamora, Central Valley Aquifer Project, California

USGS Publications Warehouse

French, J.J.; Page, R.W.; Bertoldi, G.L.

1982-01-01

Preliminary data are presented for the first of seven test holes drilled as a part of the Central Valley Aquifer Project which is part of the National Regional Aquifer Systems Analysis Program. The test hole was drilled in the SW 1/4 SE 1/4 sec. 34, T. 12 N. , R. 1 E., Yolo County, California, about 3 miles northeast of the town of Zamora. Drilled to a depth of 2,500 feet below land surface, the hole is cased to a depth of 190 feet and equipped with three piezometer tubes to depths of 947, 1,401, and 2,125 feet. A 5-foot well screen is at the bottom of each piezometer. Eighteen cores and 68 sidewall cores were recovered. Laboratory tests were made for mineralogy, hydraulic conductivity, porosity , consolidation, grain-size distribution, Atterberg limits, X-ray diffraction, diatom identification, thermal conductivity, and chemical analysis of water. Geophysical and thermal gradient logs were made. The hole is sampled periodically for chemical analysis and measured for water level in the three tapped zones. This report presents methods used to obtain field samples, laboratory procedures, and the data obtained. (USGS)

Non destructive testing of works of art by terahertz analysis

NASA Astrophysics Data System (ADS)

Bodnar, Jean-Luc; Metayer, Jean-Jacques; Mouhoubi, Kamel; Detalle, Vincent

2013-11-01

Improvements in technologies and the growing security needs in airport terminals lead to the development of non destructive testing devices using terahertz waves. Indeed, these waves have the advantage of being, on one hand, relatively penetrating. They also have the asset of not being ionizing. It is thus potentially an interesting contribution in the non destructive testing field. With the help of the VISIOM Company, the possibilities of this new industrial analysis method in assisting the restoration of works of art were then approached. The results obtained within this framework are presented here and compared with those obtained by infrared thermography. The results obtained show first that the THZ method, like the stimulated infrared thermography allows the detection of delamination located in murals paintings or in marquetries. They show then that the THZ method seems to allow detecting defects located relatively deeply (10 mm) and defects potentially concealed by other defects. It is an advantage compared to the stimulated infra-red thermography which does not make it possible to obtain these results. Furthermore, they show that the method does not seem sensitive to the various pigments constituting the pictorial layer, to the presence of a layer of "Japan paper" and to the presence of a layer of whitewash. It is not the case of the stimulated infrared thermography. It is another advantage of the THZ method. Finally, they show that the THZ method is limited in the detection of low-size defects. It is a disadvantage compared to the stimulated infrared thermography.

Illicit drug exposure in patients evaluated for alleged child abuse and neglect.

PubMed

Oral, Resmiye; Bayman, Levent; Assad, Abraham; Wibbenmeyer, Lucy; Buhrow, Jakob; Austin, Andrea; Bayman, Emine O

2011-06-01

Substantiation of drug exposure in cases with alleged maltreatment is important to provide proper treatment and services to these children and their families. A study performed at University of Iowa Hospitals and Clinics showed that 30% of pediatric patients with burn injuries, which were due to child maltreatment, were also exposed to illicit drugs. The children presenting to the University of Iowa Hospitals and Clinics with alleged maltreatment have been tested for illicit substances since 2004. The objective of this study was to analyze the presence of illicit drug exposure in the pediatric subpopulation admitted to pediatric inpatient and outpatient units for an evaluation for abuse/neglect. The study design is a retrospective chart review. Using hospital databases, every pediatric chart with a child abuse/neglect allegation was retrieved. The association between risk factors and clinical presentation and illicit drug test result was assessed. Excel and SAS were used for statistical analysis. Institutional review board approval was obtained to conduct this study. Six hundred sixty-five charts met study inclusion criteria for child abuse/neglect allegation. Of those, 232 cases were tested for illicit drugs between 2004 and 2008 per the testing protocol. Thirty-four cases (14.7%) tested positive on a drug test. Positive test rates based on clinical presentation were 28.6% (18/63) in neglect cases, 16.1% (5/31) in cases with soft tissue injuries, 14.3% (4/28) in burn injuries, 10.0% (2/20) in cases with sexual abuse, 7.1% (2/28) in cases with fractures, and 4.8% (3/62) in abusive head trauma cases. There were long-term abuse findings in 129 children (55.6%). Logistic regression analysis revealed that positive drug testing was most significantly associated with clinical symptoms suggesting physical abuse or neglect versus sexual abuse (odds ratio [OR] = 6.70; 95% confidence interval [CI], 1.26-35.49; P = 0.026), no or public health insurance versus those with private insurance (OR = 4.49; 95% CI, 1.47-13.66; P = 0.008), history of parental drug abuse versus those without parental history of drug abuse (OR = 3.42; 95% CI, 1.38-8.46; P = 0.008), and history of domestic violence versus those without a history of domestic violence (OR = 2.81; 95% CI, 1.08-7.30; P = 0.034). The results of this study showed that an illicit drug screening protocol used in the assessment of children evaluated for child abuse identified almost 15% of the population of allegedly abused and neglected children who were tested according to a protocol being exposed to illicit drugs. Thus, routine drug testing of at least children assessed for neglect and nonaccidental burn and soft tissue injuries, children with a history of either parental drug use or domestic violence is recommended.

Testing ocular irritancy in vitro with the silicon microphysiometer.

PubMed

Bruner, L H; Miller, K R; Owicki, J C; Parce, J W; Muir, V C

1991-01-01

The silicon microphysiometer, an instrument based on the light-addressable potentiometric sensor, was evaluated as an in vitro alternative for assessing ocular irritancy potential. It indirectly and non-invasively measures cell metabolism by determining the rate of acid metabolite production from cells, in this case human epidermal keratinocytes, placed inside the microphysiometer chamber. The 17 materials used for the evaluation included bar soaps, a liquid hand soap, shampoos, dishwashing liquids, laundry detergents, a fabric softener and several single chemicals. All materials tested were in liquid form. The in vivo irritancy potential of the materials was obtained from historical data using the rabbit low-volume eye test. There was a positive correlation between the in vivo irritancy potential of the test materials and the concentration of test material that decreased the acidification rate of cells by 50% (MRD(50); r = 0.86, P < 0.0001). Preliminary studies suggest other endpoints obtainable from the system may also provide useful information for making ocular safety assessments. Because the method is non-invasive, it is possible to determine whether cells recover from a treatment with the test material. The metabolic rate of the cells also increases at sub-inhibitory concentrations of some of the test materials. Because of the good correlation between the in vivo and in vitro data, the ease with which test materials can be applied to the system, and the multiple endpoints available from the system, it holds great potential as a useful in vitro alternative for ocular safety testing.

Bilateral Posterior Scleritis Associated with Giant Cell Arteritis: A Case Report.

PubMed

Erdogan, Mehmet; Sayin, Nihat; Yıldız Ekinci, Dilbade; Bayramoglu, Sadik

2017-09-15

To report a case of bilateral posterior scleritis associated with giant cell arteritis Case Report: A 62-year-old female patient presented with bilateral progressive vision loss was diagnosed with bilateral posterior scleritis. According to clinical signs and symptoms and laboratory testing, Giant cell arteritis was also diagnosed. Within 8 weeks of the corticosteroid treatment, the serous retinal detachments completely resolved and choroidal thickness decreased in both eyes. Visual acuity increased, and the symtoms related to Giant cell arteritis improved. Posterior scleritis is an inflammatory disease that may be associated with many autoimmune systemic diseases. GCA should be thought of particularly in patients over the age of 50 with bilateral involvement, and a relevant detailed history should be obtained for early and correct diagnosis and treatment.

Hypervitaminosis A inducing intra-hepatic cholestasis--a rare case report.

PubMed

Ramanathan, Vivek S; Hensley, Gary; French, Samuel; Eysselein, Victor; Chung, David; Reicher, Sonya; Pham, Binh

2010-04-01

The use of over-the-counter supplements is commonplace in today's health conscious society. We present an unusual case of intrahepatic cholestasis caused by vitamin A intoxication. The patient consumed one Herbalife shake with two multivitamin tablets of the same brand for 12 years. When calculated this equated to more than the recommended daily allowance for vitamin A consumption. Deranged liver function tests were consistent with a cholestatic process. Liver biopsy was obtained and revealed features pathognomonic of vitamin A toxicity, without the usual fibrosis. When the supplements were ceased, his jaundice and alkaline phosphatase completely normalized. This case highlights the importance of health care providers documenting non-prescribed dietary supplements and considering them in the etiology of cholestatic liver disease. Copyright 2009 Elsevier Inc. All rights reserved.