Treatment of category generation and retrieval in aphasia: Effect of typicality of category items.

PubMed Central

Kiran, Swathi; Sandberg, Chaleece; Sebastian, Rajani

2011-01-01

Purpose: Kiran and colleagues (Kiran, 2007, 2008; Kiran & Johnson, 2008; Kiran & Thompson, 2003) have previously suggested that training atypical examples within a semantic category is a more efficient treatment approach to facilitating generalization within the category than training typical examples. The present study extended our previous work examining the notion of semantic complexity within goal-derived (ad-hoc) categories in individuals with aphasia. Methods: Six individuals with fluent aphasia (range = 39-84 years) and varying degrees of naming deficits and semantic impairments were involved. Thirty typical and atypical items each from two categories were selected after an extensive stimulus norming task. Generative naming for the two categories was tested during baseline and treatment. Results: As predicted, training atypical examples in the category resulted in generalization to untrained typical examples in five out the five patient-treatment conditions. In contrast, training typical examples (which was in examined three conditions) produced mixed results. One patient showed generalization to untrained atypical examples, whereas two patients did not show generalization to untrained atypical examples. Conclusions: Results of the present study supplement our existing data on the effect of a semantically based treatment for lexical retrieval by manipulating the typicality of category exemplars. PMID:21173393

Some applications of categorical data analysis to epidemiological studies.

PubMed Central

Grizzle, J E; Koch, G G

1979-01-01

Several examples of categorized data from epidemiological studies are analyzed to illustrate that more informative analysis than tests of independence can be performed by fitting models. All of the analyses fit into a unified conceptual framework that can be performed by weighted least squares. The methods presented show how to calculate point estimate of parameters, asymptotic variances, and asymptotically valid chi 2 tests. The examples presented are analysis of relative risks estimated from several 2 x 2 tables, analysis of selected features of life tables, construction of synthetic life tables from cross-sectional studies, and analysis of dose-response curves. PMID:540590

On Insensitivity of the Chi-Square Model Test to Nonlinear Misspecification in Structural Equation Models

ERIC Educational Resources Information Center

Mooijaart, Ab; Satorra, Albert

2009-01-01

In this paper, we show that for some structural equation models (SEM), the classical chi-square goodness-of-fit test is unable to detect the presence of nonlinear terms in the model. As an example, we consider a regression model with latent variables and interactions terms. Not only the model test has zero power against that type of…

14 CFR 91.1017 - Amending program manager's management specifications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicant for the amendment to become effective, unless a shorter time is approved, in cases such as mergers, acquisitions of operational assets that require an additional showing of safety (for example, proving tests or...

On Improving the Experiment Methodology in Pedagogical Research

ERIC Educational Resources Information Center

Horakova, Tereza; Houska, Milan

2014-01-01

The paper shows how the methodology for a pedagogical experiment can be improved through including the pre-research stage. If the experiment has the form of a test procedure, an improvement of methodology can be achieved using for example the methods of statistical and didactic analysis of tests which are traditionally used in other areas, i.e.…

40 CFR 1048.205 - What must I include in my application?

Code of Federal Regulations, 2011 CFR

2011-07-01

... (AECDs) and all fuel-system components you will install on any production or test engine. Identify the... fuel types on which your engines are designed to operate (for example, gasoline and natural gas). List... maintenance you did. (g) List the specifications of each test fuel to show that it falls within the required...

40 CFR 1048.205 - What must I include in my application?

Code of Federal Regulations, 2012 CFR

2012-07-01

... (AECDs) and all fuel-system components you will install on any production or test engine. Identify the... fuel types on which your engines are designed to operate (for example, gasoline and natural gas). List... maintenance you did. (g) List the specifications of each test fuel to show that it falls within the required...

Computer Programs (Turbomachinery)

NASA Technical Reports Server (NTRS)

1978-01-01

NASA computer programs are extensively used in design of industrial equipment. Available from the Computer Software Management and Information Center (COSMIC) at the University of Georgia, these programs are employed as analysis tools in design, test and development processes, providing savings in time and money. For example, two NASA computer programs are used daily in the design of turbomachinery by Delaval Turbine Division, Trenton, New Jersey. The company uses the NASA splint interpolation routine for analysis of turbine blade vibration and the performance of compressors and condensers. A second program, the NASA print plot routine, analyzes turbine rotor response and produces graphs for project reports. The photos show examples of Delaval test operations in which the computer programs play a part. In the large photo below, a 24-inch turbine blade is undergoing test; in the smaller photo, a steam turbine rotor is being prepared for stress measurements under actual operating conditions; the "spaghetti" is wiring for test instrumentation

Novel optoelectronic methodology for testing of MOEMS

NASA Astrophysics Data System (ADS)

Pryputniewicz, Ryszard J.; Furlong, Cosme

2003-01-01

Continued demands for delivery of high performance micro-optoelectromechanical systems (MOEMS) place unprecedented requirements on methods used in their development and operation. Metrology is a major and inseparable part of these methods. Optoelectronic methodology is an essential field of metrology. Due to its scalability, optoelectronic methodology is particularly suitable for testing of MOEMS where measurements must be made with ever increasing accuracy and precision. This was particularly evident during the last few years, characterized by miniaturization of devices, when requirements for measurements have rapidly increased as the emerging technologies introduced new products, especially, optical MEMS. In this paper, a novel optoelectronic methodology for testing of MOEMS is described and its applications are illustrated with representative examples. These examples demonstrate capability to measure submicron deformations of various components of the micromirror device, under operating conditions, and show viability of the optoelectronic methodology for testing of MOEMS.

A rational account of pedagogical reasoning: teaching by, and learning from, examples.

PubMed

Shafto, Patrick; Goodman, Noah D; Griffiths, Thomas L

2014-06-01

Much of learning and reasoning occurs in pedagogical situations--situations in which a person who knows a concept chooses examples for the purpose of helping a learner acquire the concept. We introduce a model of teaching and learning in pedagogical settings that predicts which examples teachers should choose and what learners should infer given a teacher's examples. We present three experiments testing the model predictions for rule-based, prototype, and causally structured concepts. The model shows good quantitative and qualitative fits to the data across all three experiments, predicting novel qualitative phenomena in each case. We conclude by discussing implications for understanding concept learning and implications for theoretical claims about the role of pedagogy in human learning. Copyright © 2014 Elsevier Inc. All rights reserved.

Wald Sequential Probability Ratio Test for Space Object Conjunction Assessment

NASA Technical Reports Server (NTRS)

Carpenter, James R.; Markley, F Landis

2014-01-01

This paper shows how satellite owner/operators may use sequential estimates of collision probability, along with a prior assessment of the base risk of collision, in a compound hypothesis ratio test to inform decisions concerning collision risk mitigation maneuvers. The compound hypothesis test reduces to a simple probability ratio test, which appears to be a novel result. The test satisfies tolerances related to targeted false alarm and missed detection rates. This result is independent of the method one uses to compute the probability density that one integrates to compute collision probability. A well-established test case from the literature shows that this test yields acceptable results within the constraints of a typical operational conjunction assessment decision timeline. Another example illustrates the use of the test in a practical conjunction assessment scenario based on operations of the International Space Station.

Quality control of fireproof coatings for reinforced concrete structures

NASA Astrophysics Data System (ADS)

Gravit, Marina; Dmitriev, Ivan; Ishkov, Alexander

2017-10-01

The article analyzes methods of quality inspection of fireproof coatings (work flow, measuring, laboratory, etc.). In modern construction there is a problem of lack of distinct monitoring for the fire protection testing. There is a description of this testing for reinforced concrete structures. The article shows the results of calculation quality control of hatches as an example of fireproof coating for reinforced concrete structures.

Functional Interrupts and Destructive Failures from Single Event Effect Testing of Point-Of-Load Devices

NASA Technical Reports Server (NTRS)

Chen, Dakai; Phan, Anthony; Kim, Hak; Swonger, James; Musil, Paul; LaBel, Kenneth

2013-01-01

We show examples of single event functional interrupt and destructive failure in modern POL devices. The increasing complexity and diversity of the design and process introduce hard SEE modes that are triggered by various mechanisms.

A Quasi-3-D Theory for Impedance Eduction in Uniform Grazing Flow

NASA Technical Reports Server (NTRS)

Watson, W. R.; Jones, M. G.; Parrott, T. L.

2005-01-01

A 2-D impedance eduction methodology is extended to quasi-3-D sound fields in uniform or shearing mean flow. We introduce a nonlocal, nonreflecting boundary condition to terminate the duct and then educe the impedance by minimizing an objective function. The introduction of a parallel, sparse, equation solver significantly reduces the wall clock time for educing the impedance when compared to that of the sequential band solver used in the 2-D methodology. The accuracy, efficiency, and robustness of the methodology is demonstrated using two examples. In the first example, we show that the method reproduces the known impedance of a ceramic tubular test liner. In the second example, we illustrate that the approach educes the impedance of a four-segment liner where the first, second, and fourth segments consist of a perforated face sheet bonded to honeycomb, and the third segment is a cut from the ceramic tubular test liner. The ability of the method to educe the impedances of multisegmented liners has the potential to significantly reduce the amount of time and cost required to determine the impedance of several uniform liners by allowing them to be placed in series in the test section and to educe the impedance of each segment using a single numerical experiment. Finally, we probe the objective function in great detail and show that it contains a single minimum. Thus, our objective function is ideal for use with local, inexpensive, gradient-based optimizers.

Physical properties of VNTR data, and their impact on a test of allelic independence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Devlin, B.; Risch, N.

1993-08-01

In this article the authors describe the physical properties of VNTR data, as well as their effects on the two-dimensional distribution of fragment pairs. Tests of independence of alleles at a locus may confound those physical properties with allele independence. A recently proposed test by Geisser and Johnson is an example. The authors show that alleles can be strictly independent, yet the proposed test suggests large violations of allele independence because it is sensitive to well-known electrophoretic phenomena. 7 refs., 4 tabs.

Twenty Years On!: Updating the IEA BESTEST Building Thermal Fabric Test Cases for ASHRAE Standard 140

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkoff, R.; Neymark, J.

2013-07-01

ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs applies the IEA BESTEST building thermal fabric test cases and example simulation results originally published in 1995. These software accuracy test cases and their example simulation results, which comprise the first test suite adapted for the initial 2001 version of Standard 140, are approaching their 20th anniversary. In response to the evolution of the state of the art in building thermal fabric modeling since the test cases and example simulation results were developed, work is commencing to update the normative test specification and themore » informative example results.« less

Twenty Years On!: Updating the IEA BESTEST Building Thermal Fabric Test Cases for ASHRAE Standard 140: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkoff, R.; Neymark, J.

2013-07-01

ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs applies the IEA BESTEST building thermal fabric test cases and example simulation results originally published in 1995. These software accuracy test cases and their example simulation results, which comprise the first test suite adapted for the initial 2001 version of Standard 140, are approaching their 20th anniversary. In response to the evolution of the state of the art in building thermal fabric modeling since the test cases and example simulation results were developed, work is commencing to update the normative test specification and themore » informative example results.« less

Sierra/SolidMechanics 4.46 Example Problems Manual.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose

Presented in this document are tests that exist in the Sierra/SolidMechanics example problem suite, which is a subset of the Sierra/SM regression and performance test suite. These examples showcase common and advanced code capabilities. A wide variety of other regression and verification tests exist in the Sierra/SM test suite that are not included in this manual.

Non-Destructive Evaluation of Aerospace Composites

DTIC Science & Technology

2009-03-01

security as well as non-invasive epithelial and breast cancer detection [3, 23]. Figure 8 shows a pair of examples of current THz imaging systems...conduction videos; each test lasting approximately 10 seconds. 3.3.2 Thermography Procedure The samples were set flat on two wooden slats to

Potential Utility of Non-Cognitive Constructs in Graduate Admissions

NASA Astrophysics Data System (ADS)

Miller, Casey

2015-03-01

It is becoming clear that the methods employed by many graduate admissions committees need updating. Regarding outcomes, we cannot select students that will actually graduate much better than would a coin toss. Further, the GRE is often misused. For example, the most recent GRE general test data (2006-2007) shows that for US citizens in the physical sciences, a cut-off score of ~64th percentile (700/155 on old/new test) would eliminate from eligibility: 63% of women vs 42% of men; 76% of all under-represented minorities vs 38% of Asian and 47% of White applicants. Fortunately, Organizational Psychologists have identified and validated several ``non-cognitive constructs'' for admissions: aspects of personality (conscientiousness); and self-management factors. Some intriguing facts about these parameters: they are measurable with the help of social scientists; they do not show race/ethnicity/gender performance differences; they are orthogonal to cognitive metrics measured by GPA and tests scores. These are proven to enhance both validity and diversity in admissions. My goals for this talk are to overview the non-cognitive constructs with the most potential for being used in physics graduate admissions, and to suggest example admissions protocols. Supported by the National Science Foundation.

Modeling of UH-60A Hub Accelerations with Neural Networks

NASA Technical Reports Server (NTRS)

Kottapalli, Sesi

2002-01-01

Neural network relationships between the full-scale, flight test hub accelerations and the corresponding three N/rev pilot floor vibration components (vertical, lateral, and longitudinal) are studied. The present quantitative effort on the UH-60A Black Hawk hub accelerations considers the lateral and longitudinal vibrations. An earlier study had considered the vertical vibration. The NASA/Army UH-60A Airloads Program flight test database is used. A physics based "maneuver-effect-factor (MEF)", derived using the roll-angle and the pitch-rate, is used. Fundamentally, the lateral vibration data show high vibration levels (up to 0.3 g's) at low airspeeds (for example, during landing flares) and at high airspeeds (for example, during turns). The results show that the advance ratio and the gross weight together can predict the vertical and the longitudinal vibration. However, the advance ratio and the gross weight together cannot predict the lateral vibration. The hub accelerations and the advance ratio can be used to satisfactorily predict the vertical, lateral, and longitudinal vibration. The present study shows that neural network based representations of all three UH-60A pilot floor vibration components (vertical, lateral, and longitudinal) can be obtained using the hub accelerations along with the gross weight and the advance ratio. The hub accelerations are clearly a factor in determining the pilot vibration. The present conclusions potentially allow for the identification of neural network relationships between the experimental hub accelerations obtained from wind tunnel testing and the experimental pilot vibration data obtained from flight testing. A successful establishment of the above neural network based link between the wind tunnel hub accelerations and the flight test vibration data can increase the value of wind tunnel testing.

Example-based learning: effects of model expertise in relation to student expertise.

PubMed

Boekhout, Paul; van Gog, Tamara; van de Wiel, Margje W J; Gerards-Last, Dorien; Geraets, Jacques

2010-12-01

Worked examples are very effective for novice learners. They typically present a written-out ideal (didactical) solution for learners to study. This study used worked examples of patient history taking in physiotherapy that presented a non-didactical solution (i.e., based on actual performance). The effects of model expertise (i.e., worked example based on advanced, third-year student model or expert physiotherapist model) in relation to students' expertise (i.e., first- or second-year) were investigated. One hundred and thirty-four physiotherapy students (61 first-year and 73 second-year). Design was 2 × 2 factorial with factors 'Student Expertise' (first-year vs. second-year) and 'Model Expertise' (expert vs. advanced student). Within expertise levels, students were randomly assigned to the Expert Example or the Advanced Student Example condition. All students studied two examples (content depending on their assigned condition) and then completed a retention and test task. They rated their invested mental effort after each example and test task. Second-year students invested less mental effort in studying the examples, and in performing the retention and transfer tasks than first-year students. They also performed better on the retention test, but not on the transfer test. In contrast to our hypothesis, there was no interaction between student expertise and model expertise: all students who had studied the Expert examples performed better on the transfer test than students who had studied Advanced Student Examples. This study suggests that when worked examples are based on actual performance, rather than an ideal procedure, expert models are to be preferred over advanced student models.

Modified surface testing method for large convex aspheric surfaces based on diffraction optics.

PubMed

Zhang, Haidong; Wang, Xiaokun; Xue, Donglin; Zhang, Xuejun

2017-12-01

Large convex aspheric optical elements have been widely applied in advanced optical systems, which have presented a challenging metrology problem. Conventional testing methods cannot satisfy the demand gradually with the change of definition of "large." A modified method is proposed in this paper, which utilizes a relatively small computer-generated hologram and an illumination lens with certain feasibility to measure the large convex aspherics. Two example systems are designed to demonstrate the applicability, and also, the sensitivity of this configuration is analyzed, which proves the accuracy of the configuration can be better than 6 nm with careful alignment and calibration of the illumination lens in advance. Design examples and analysis show that this configuration is applicable to measure the large convex aspheric surfaces.

Resilient Sensor Networks with Spatiotemporal Interpolation of Missing Sensors: An Example of Space Weather Forecasting by Multiple Satellites

PubMed Central

Tokumitsu, Masahiro; Hasegawa, Keisuke; Ishida, Yoshiteru

2016-01-01

This paper attempts to construct a resilient sensor network model with an example of space weather forecasting. The proposed model is based on a dynamic relational network. Space weather forecasting is vital for a satellite operation because an operational team needs to make a decision for providing its satellite service. The proposed model is resilient to failures of sensors or missing data due to the satellite operation. In the proposed model, the missing data of a sensor is interpolated by other sensors associated. This paper demonstrates two examples of space weather forecasting that involves the missing observations in some test cases. In these examples, the sensor network for space weather forecasting continues a diagnosis by replacing faulted sensors with virtual ones. The demonstrations showed that the proposed model is resilient against sensor failures due to suspension of hardware failures or technical reasons. PMID:27092508

Resilient Sensor Networks with Spatiotemporal Interpolation of Missing Sensors: An Example of Space Weather Forecasting by Multiple Satellites.

PubMed

Tokumitsu, Masahiro; Hasegawa, Keisuke; Ishida, Yoshiteru

2016-04-15

This paper attempts to construct a resilient sensor network model with an example of space weather forecasting. The proposed model is based on a dynamic relational network. Space weather forecasting is vital for a satellite operation because an operational team needs to make a decision for providing its satellite service. The proposed model is resilient to failures of sensors or missing data due to the satellite operation. In the proposed model, the missing data of a sensor is interpolated by other sensors associated. This paper demonstrates two examples of space weather forecasting that involves the missing observations in some test cases. In these examples, the sensor network for space weather forecasting continues a diagnosis by replacing faulted sensors with virtual ones. The demonstrations showed that the proposed model is resilient against sensor failures due to suspension of hardware failures or technical reasons.

Simulation of the pulse propagation by the interacting mode parabolic equation method

NASA Astrophysics Data System (ADS)

Trofimov, M. Yu.; Kozitskiy, S. B.; Zakharenko, A. D.

2018-07-01

A broadband modeling of pulses has been performed by using the previously derived interacting mode parabolic equation through the Fourier synthesis. Test examples on the wedge with the angle 2.86∘ (known as the ASA benchmark) show excellent agreement with the source images method.

40 CFR 1042.107 - Evaporative emission standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... fuels (for example, natural gas). (b) If an engine uses a volatile liquid fuel, such as methanol, the engine's fuel system and the vessel in which the engine is installed must meet the evaporative emission... emissions are controlled. (2) Present test data to show that fuel systems and vessels meet the evaporative...

40 CFR 1042.107 - Evaporative emission standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... fuels (for example, natural gas). (b) If an engine uses a volatile liquid fuel, such as methanol, the engine's fuel system and the vessel in which the engine is installed must meet the evaporative emission... emissions are controlled. (2) Present test data to show that fuel systems and vessels meet the evaporative...

Student Modeling and Ab Initio Language Learning.

ERIC Educational Resources Information Center

Heift, Trude; Schulze, Mathias

2003-01-01

Provides examples of student modeling techniques that have been employed in computer-assisted language learning over the past decade. Describes two systems for learning German: "German Tutor" and "Geroline." Shows how a student model can support computerized adaptive language testing for diagnostic purposes in a Web-based language learning…

Numerical Simulation of Selecting Model Scale of Cable in Wind Tunnel Test

NASA Astrophysics Data System (ADS)

Huang, Yifeng; Yang, Jixin

The numerical simulation method based on computational Fluid Dynamics (CFD) provides a possible alternative means of physical wind tunnel test. Firstly, the correctness of the numerical simulation method is validated by one certain example. In order to select the minimum length of the cable as to a certain diameter in the numerical wind tunnel tests, the numerical wind tunnel tests based on CFD are carried out on the cables with several different length-diameter ratios (L/D). The results show that, when the L/D reaches to 18, the drag coefficient is stable essentially.

26 CFR 1.48-10 - Single purpose agricultural or horticultural structures.

Code of Federal Regulations, 2014 CFR

2014-04-01

... test if either of the requirements of paragraph (e)(1)(i) of this section is not met. Thus, for example... the structure to fail the exclusive use test when the change occurs. Thus, for example, a hog-raising... example). Finally, the structure fails the incidental use test of paragraph (e) of this section because...

26 CFR 1.48-10 - Single purpose agricultural or horticultural structures.

Code of Federal Regulations, 2013 CFR

2013-04-01

... test if either of the requirements of paragraph (e)(1)(i) of this section is not met. Thus, for example... the structure to fail the exclusive use test when the change occurs. Thus, for example, a hog-raising... example). Finally, the structure fails the incidental use test of paragraph (e) of this section because...

Measuring unsteady pressure on rotating compressor blades

NASA Technical Reports Server (NTRS)

Englund, D. R.; Grant, H. P.; Lanati, G. A.

1979-01-01

Miniature semiconductor strain gage pressure transducers mounted in several arrangements were studied. Both surface mountings and recessed flush mountings were tested. Test parameters included mounting arrangement, blade material, temperature, local strain in the acceleration normal to the transducer diaphragm, centripetal acceleration, and pressure. Test results show no failures of transducers or mountings and indicate an uncertainty of unsteady pressure measurement of approximately + or - 6 percent + 0.1 kPa for a typical application. Two configurations were used on a rotating fan flutter program. Examples of transducer data and correction factors are presented.

Acquisition of new concepts by two amnesic patients.

PubMed

Van der Linden, M; Meulemans, T; Lorrain, D

1994-06-01

Two Korsakoff amnesics (A.G. and G.S.) and two control subjects were taught six new concepts. Each concept was composed of three parts: the name of the concept, the context in which the concept originated and its definition. The learning procedure consisted of two phases: (1) learning the concept names and definitions by means of the vanishing-cues method; (2) practice on examples of the concepts through a classification task: examples were either set in the same context as that given in the original definition or in mixed contexts (same and new contexts). Subjects were then tested after 24 hours, a week and a month on their ability to identify new examples as belonging to one of the conceptual rules studied (transfer tests). Both patients showed substantial learning. Patient A.G. was slow and dependent of the first letter cues in the vanishing-cues learning phase but nevertheless, she acquired a large and flexible conceptual knowledge and this was especially true for concepts that were practised by means of mixed-context examples. Patient G.S. easily learned to associate the definitions with the concept names but her conceptual knowledge remained more limited. These results confirm the existence of a semantic learning ability in amnesic patients. They also suggest that under appropriate learning conditions, amnesics may eventually acquire a new flexible conceptual knowledge.

Significance of Retinal Lesions Potentially Caused by Dazzling Lasers

DTIC Science & Technology

2015-12-01

Refractive eye surgery (e.g., LASIK and PRK ) exploit this property of UV light to reshape the cornea with great precision (Barkana and Belkin 2000). 39...response, perimetry tests document the boundaries between seeing vs . not seeing the target to produce a drawing of the visual field (Broadway 2012). Figure...8 shows an example of the perimetry test results. The curves drawn are known as “isopters” and represent boundaries between seeing vs . not seeing

General Method for Constructing Local Hidden Variable Models for Entangled Quantum States

NASA Astrophysics Data System (ADS)

Cavalcanti, D.; Guerini, L.; Rabelo, R.; Skrzypczyk, P.

2016-11-01

Entanglement allows for the nonlocality of quantum theory, which is the resource behind device-independent quantum information protocols. However, not all entangled quantum states display nonlocality. A central question is to determine the precise relation between entanglement and nonlocality. Here we present the first general test to decide whether a quantum state is local, and show that the test can be implemented by semidefinite programing. This method can be applied to any given state and for the construction of new examples of states with local hidden variable models for both projective and general measurements. As applications, we provide a lower-bound estimate of the fraction of two-qubit local entangled states and present new explicit examples of such states, including those that arise from physical noise models, Bell-diagonal states, and noisy Greenberger-Horne-Zeilinger and W states.

Multiple hypotheses testing based on ordered p values--a historical survey with applications to medical research.

PubMed

Hommel, Gerhard; Bretz, Frank; Maurer, Willi

2011-07-01

Global tests and multiple test procedures are often based on ordered p values. Such procedures are available for arbitrary dependence structures as well as for specific dependence assumptions of the test statistics. Most of these procedures have been considered as global tests. Multiple test procedures can be obtained by applying the closure principle in order to control the familywise error rate, or by using the false discovery rate as a criterion for type I error rate control. We provide an overview and present examples showing the importance of these procedures in medical research. Finally, we discuss modifications when different weights for the hypotheses of interest are chosen.

Formal Functional Test Designs: Bridging the Gap Between Test Requirements and Test Specifications

NASA Technical Reports Server (NTRS)

Hops, Jonathan

1993-01-01

This presentation describes the testing life cycle, the purpose of the test design phase, and test design methods and gives an example application. Also included is a description of Test Representation Language (TRL), a summary of the language, and an example of an application of TRL. A sample test requirement and sample test design are included.

Allicat magnetoresistive head design and performance

NASA Astrophysics Data System (ADS)

Hannon, David; Krounbi, Mohamed; Christner, Jodie

1994-03-01

The general design features of the magnetoresistive (MR) merged head are described and compared to the earlier MR piggy-back head called Corsair. Examples of static, magnetic, and error rate testing are given. Dual track profiles show the read-narrow feature of the MR head. Stability of the signal with write disturbance shows the effectiveness of the hard-bias longitudinal biasing. Error rate versus off-track position indicates the robustness of the file design.

How Gender Differences in Academic Engagement Relate to Students' Gender Identity

ERIC Educational Resources Information Center

Kessels, Ursula; Heyder, Anke; Latsch, Martin; Hannover, Bettina

2014-01-01

Background: Gender differences in educational outcomes encompass many different areas. For example, in some educational settings, boys lag behind girls on indicators of educational success, such as leaving certificates and type of school attended. In studies testing performance, boys typically show lower competence in reading compared with girls,…

Getting Girls De-Stereotyped for SAT Exams

ERIC Educational Resources Information Center

Altermatt, Ellen Rydell; Kim, Minha Esther

2004-01-01

Society knows well that males outperform females on mathematics portions of college entrance examinations. In 2003, for example, males scored an average 537 points on the mathematics section of the Scholastic Aptitude Test, while females averaged 503. Less well known is that males also show a slight advantage on the verbal portion. These gaps…

Preparations for Physics Studies with ATLAS During the First Years of the LHC

ScienceCinema

Fabiola Gianotti

2018-04-18

I will review the status of the ATLAS detector installation and commissioning, and discuss the preparation for physics with test-beam studies, detailed simulations, and runs with cosmics. I will then show examples of physics opportunities with the first LHC data.   

Testing the Stability of 2-D Recursive QP, NSHP and General Digital Filters of Second Order

NASA Astrophysics Data System (ADS)

Rathinam, Ananthanarayanan; Ramesh, Rengaswamy; Reddy, P. Subbarami; Ramaswami, Ramaswamy

Several methods for testing stability of first quadrant quarter-plane two dimensional (2-D) recursive digital filters have been suggested in 1970's and 80's. Though Jury's row and column algorithms, row and column concatenation stability tests have been considered as highly efficient mapping methods. They still fall short of accuracy as they need infinite number of steps to conclude about the exact stability of the filters and also the computational time required is enormous. In this paper, we present procedurally very simple algebraic method requiring only two steps when applied to the second order 2-D quarter - plane filter. We extend the same method to the second order Non-Symmetric Half-plane (NSHP) filters. Enough examples are given for both these types of filters as well as some lower order general recursive 2-D digital filters. We applied our method to barely stable or barely unstable filter examples available in the literature and got the same decisions thus showing that our method is accurate enough.

Combining test statistics and models in bootstrapped model rejection: it is a balancing act

PubMed Central

2014-01-01

Background Model rejections lie at the heart of systems biology, since they provide conclusive statements: that the corresponding mechanistic assumptions do not serve as valid explanations for the experimental data. Rejections are usually done using e.g. the chi-square test (χ2) or the Durbin-Watson test (DW). Analytical formulas for the corresponding distributions rely on assumptions that typically are not fulfilled. This problem is partly alleviated by the usage of bootstrapping, a computationally heavy approach to calculate an empirical distribution. Bootstrapping also allows for a natural extension to estimation of joint distributions, but this feature has so far been little exploited. Results We herein show that simplistic combinations of bootstrapped tests, like the max or min of the individual p-values, give inconsistent, i.e. overly conservative or liberal, results. A new two-dimensional (2D) approach based on parametric bootstrapping, on the other hand, is found both consistent and with a higher power than the individual tests, when tested on static and dynamic examples where the truth is known. In the same examples, the most superior test is a 2D χ2vsχ2, where the second χ2-value comes from an additional help model, and its ability to describe bootstraps from the tested model. This superiority is lost if the help model is too simple, or too flexible. If a useful help model is found, the most powerful approach is the bootstrapped log-likelihood ratio (LHR). We show that this is because the LHR is one-dimensional, because the second dimension comes at a cost, and because LHR has retained most of the crucial information in the 2D distribution. These approaches statistically resolve a previously published rejection example for the first time. Conclusions We have shown how to, and how not to, combine tests in a bootstrap setting, when the combination is advantageous, and when it is advantageous to include a second model. These results also provide a deeper insight into the original motivation for formulating the LHR, for the more general setting of nonlinear and non-nested models. These insights are valuable in cases when accuracy and power, rather than computational speed, are prioritized. PMID:24742065

Can MOND type hypotheses be tested in a free fall laboratory environment?

NASA Astrophysics Data System (ADS)

Das, Saurya; Patitsas, S. N.

2013-05-01

The extremely small accelerations of objects required for the onset of modified Newtonian dynamics, or modified Newtonian dynamics (MOND), makes testing the hypothesis in conventional terrestrial laboratories virtually impossible. This is due to the large background acceleration of Earth, which is transmitted to the acceleration of test objects within an apparatus. We show, however, that it may be possible to test MOND-type hypotheses with experiments using a conventional apparatus capable of tracking very small accelerations of its components but performed in locally inertial frames such as artificial satellites and other freely falling laboratories. For example, experiments involving an optical interferometer or a torsion balance in these laboratories would show nonlinear dynamics and displacement amplitudes larger than expected. These experiments may also be able to test potential violations of the strong equivalence principle by MOND and to distinguish between its two possible interpretations (modified inertia and modified gravity).

Design and implementation of a general and automatic test platform base on NI PXI system

NASA Astrophysics Data System (ADS)

Shi, Long

2018-05-01

Aiming at some difficulties of test equipment such as the short product life, poor generality and high development cost, a general and automatic test platform base on NI PXI system is designed in this paper, which is able to meet most test requirements of circuit boards. The test platform is devided into 5 layers, every layer is introduced in detail except for the "Equipment Under Test" layer. An output board of a track-side equipment, which is an important part of high speed train control system, is taken as an example to make the functional circuit test by the test platform. The results show that the test platform is easy to realize add-on functions development, automatic test, wide compatibility and strong generality.

Example-based learning: comparing the effects of additionally providing three different integrative learning activities on physiotherapy intervention knowledge.

PubMed

Dyer, Joseph-Omer; Hudon, Anne; Montpetit-Tourangeau, Katherine; Charlin, Bernard; Mamede, Sílvia; van Gog, Tamara

2015-03-07

Example-based learning using worked examples can foster clinical reasoning. Worked examples are instructional tools that learners can use to study the steps needed to solve a problem. Studying worked examples paired with completion examples promotes acquisition of problem-solving skills more than studying worked examples alone. Completion examples are worked examples in which some of the solution steps remain unsolved for learners to complete. Providing learners engaged in example-based learning with self-explanation prompts has been shown to foster increased meaningful learning compared to providing no self-explanation prompts. Concept mapping and concept map study are other instructional activities known to promote meaningful learning. This study compares the effects of self-explaining, completing a concept map and studying a concept map on conceptual knowledge and problem-solving skills among novice learners engaged in example-based learning. Ninety-one physiotherapy students were randomized into three conditions. They performed a pre-test and a post-test to evaluate their gains in conceptual knowledge and problem-solving skills (transfer performance) in intervention selection. They studied three pairs of worked/completion examples in a digital learning environment. Worked examples consisted of a written reasoning process for selecting an optimal physiotherapy intervention for a patient. The completion examples were partially worked out, with the last few problem-solving steps left blank for students to complete. The students then had to engage in additional self-explanation, concept map completion or model concept map study in order to synthesize and deepen their knowledge of the key concepts and problem-solving steps. Pre-test performance did not differ among conditions. Post-test conceptual knowledge was higher (P < .001) in the concept map study condition (68.8 ± 21.8%) compared to the concept map completion (52.8 ± 17.0%) and self-explanation (52.2 ± 21.7%) conditions. Post-test problem-solving performance was higher (P < .05) in the self-explanation (63.2 ± 16.0%) condition compared to the concept map study (53.3 ± 16.4%) and concept map completion (51.0 ± 13.6%) conditions. Students in the self-explanation condition also invested less mental effort in the post-test. Studying model concept maps led to greater conceptual knowledge, whereas self-explanation led to higher transfer performance. Self-explanation and concept map study can be combined with worked example and completion example strategies to foster intervention selection.

Ultra high resolution stepper motors design, development, performance and application

NASA Technical Reports Server (NTRS)

Moll, H.; Roeckl, G.

1979-01-01

The design and development of stepper motors with steps in the 10 arc sec to 2 arc min range is described. Some of the problem areas, e.g. rotor suspension, tribology aspects and environmental conditions are covered. A summary of achieved test results and the employment in different mechanisms already developed and tested is presented to give some examples of the possible use of this interesting device. Adaptations to military and commercial requirements are proposed and show the wide range of possible applications.

Dialable Cryptography for Wireless Networks

DTIC Science & Technology

2008-03-01

size increased the file size differences for RSA and ELG-E. For example, Elg-E with key size 768 had a smaller file size difference than Elg-E with...not tested at key size 768 ). Figure 11 shows the file size differences for RSA and ElGamal for the different key sizes (all file size differences...times for key sizes 1024 and 1280 (key size 768 was only tested with ElGamal. Once the key size increased above 1280, RSA rose slower than ElGamal

Accounting for Uncertainty in Decision Analytic Models Using Rank Preserving Structural Failure Time Modeling: Application to Parametric Survival Models.

PubMed

Bennett, Iain; Paracha, Noman; Abrams, Keith; Ray, Joshua

2018-01-01

Rank Preserving Structural Failure Time models are one of the most commonly used statistical methods to adjust for treatment switching in oncology clinical trials. The method is often applied in a decision analytic model without appropriately accounting for additional uncertainty when determining the allocation of health care resources. The aim of the study is to describe novel approaches to adequately account for uncertainty when using a Rank Preserving Structural Failure Time model in a decision analytic model. Using two examples, we tested and compared the performance of the novel Test-based method with the resampling bootstrap method and with the conventional approach of no adjustment. In the first example, we simulated life expectancy using a simple decision analytic model based on a hypothetical oncology trial with treatment switching. In the second example, we applied the adjustment method on published data when no individual patient data were available. Mean estimates of overall and incremental life expectancy were similar across methods. However, the bootstrapped and test-based estimates consistently produced greater estimates of uncertainty compared with the estimate without any adjustment applied. Similar results were observed when using the test based approach on a published data showing that failing to adjust for uncertainty led to smaller confidence intervals. Both the bootstrapping and test-based approaches provide a solution to appropriately incorporate uncertainty, with the benefit that the latter can implemented by researchers in the absence of individual patient data. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Distributed Evaluation of Local Sensitivity Analysis (DELSA), with application to hydrologic models

USGS Publications Warehouse

Rakovec, O.; Hill, Mary C.; Clark, M.P.; Weerts, A. H.; Teuling, A. J.; Uijlenhoet, R.

2014-01-01

This paper presents a hybrid local-global sensitivity analysis method termed the Distributed Evaluation of Local Sensitivity Analysis (DELSA), which is used here to identify important and unimportant parameters and evaluate how model parameter importance changes as parameter values change. DELSA uses derivative-based “local” methods to obtain the distribution of parameter sensitivity across the parameter space, which promotes consideration of sensitivity analysis results in the context of simulated dynamics. This work presents DELSA, discusses how it relates to existing methods, and uses two hydrologic test cases to compare its performance with the popular global, variance-based Sobol' method. The first test case is a simple nonlinear reservoir model with two parameters. The second test case involves five alternative “bucket-style” hydrologic models with up to 14 parameters applied to a medium-sized catchment (200 km2) in the Belgian Ardennes. Results show that in both examples, Sobol' and DELSA identify similar important and unimportant parameters, with DELSA enabling more detailed insight at much lower computational cost. For example, in the real-world problem the time delay in runoff is the most important parameter in all models, but DELSA shows that for about 20% of parameter sets it is not important at all and alternative mechanisms and parameters dominate. Moreover, the time delay was identified as important in regions producing poor model fits, whereas other parameters were identified as more important in regions of the parameter space producing better model fits. The ability to understand how parameter importance varies through parameter space is critical to inform decisions about, for example, additional data collection and model development. The ability to perform such analyses with modest computational requirements provides exciting opportunities to evaluate complicated models as well as many alternative models.

A comparative analysis of predictive models of morbidity in intensive care unit after cardiac surgery - part II: an illustrative example.

PubMed

Cevenini, Gabriele; Barbini, Emanuela; Scolletta, Sabino; Biagioli, Bonizella; Giomarelli, Pierpaolo; Barbini, Paolo

2007-11-22

Popular predictive models for estimating morbidity probability after heart surgery are compared critically in a unitary framework. The study is divided into two parts. In the first part modelling techniques and intrinsic strengths and weaknesses of different approaches were discussed from a theoretical point of view. In this second part the performances of the same models are evaluated in an illustrative example. Eight models were developed: Bayes linear and quadratic models, k-nearest neighbour model, logistic regression model, Higgins and direct scoring systems and two feed-forward artificial neural networks with one and two layers. Cardiovascular, respiratory, neurological, renal, infectious and hemorrhagic complications were defined as morbidity. Training and testing sets each of 545 cases were used. The optimal set of predictors was chosen among a collection of 78 preoperative, intraoperative and postoperative variables by a stepwise procedure. Discrimination and calibration were evaluated by the area under the receiver operating characteristic curve and Hosmer-Lemeshow goodness-of-fit test, respectively. Scoring systems and the logistic regression model required the largest set of predictors, while Bayesian and k-nearest neighbour models were much more parsimonious. In testing data, all models showed acceptable discrimination capacities, however the Bayes quadratic model, using only three predictors, provided the best performance. All models showed satisfactory generalization ability: again the Bayes quadratic model exhibited the best generalization, while artificial neural networks and scoring systems gave the worst results. Finally, poor calibration was obtained when using scoring systems, k-nearest neighbour model and artificial neural networks, while Bayes (after recalibration) and logistic regression models gave adequate results. Although all the predictive models showed acceptable discrimination performance in the example considered, the Bayes and logistic regression models seemed better than the others, because they also had good generalization and calibration. The Bayes quadratic model seemed to be a convincing alternative to the much more usual Bayes linear and logistic regression models. It showed its capacity to identify a minimum core of predictors generally recognized as essential to pragmatically evaluate the risk of developing morbidity after heart surgery.

Allele-sharing models: LOD scores and accurate linkage tests.

PubMed

Kong, A; Cox, N J

1997-11-01

Starting with a test statistic for linkage analysis based on allele sharing, we propose an associated one-parameter model. Under general missing-data patterns, this model allows exact calculation of likelihood ratios and LOD scores and has been implemented by a simple modification of existing software. Most important, accurate linkage tests can be performed. Using an example, we show that some previously suggested approaches to handling less than perfectly informative data can be unacceptably conservative. Situations in which this model may not perform well are discussed, and an alternative model that requires additional computations is suggested.

Allele-sharing models: LOD scores and accurate linkage tests.

PubMed Central

Kong, A; Cox, N J

1997-01-01

Starting with a test statistic for linkage analysis based on allele sharing, we propose an associated one-parameter model. Under general missing-data patterns, this model allows exact calculation of likelihood ratios and LOD scores and has been implemented by a simple modification of existing software. Most important, accurate linkage tests can be performed. Using an example, we show that some previously suggested approaches to handling less than perfectly informative data can be unacceptably conservative. Situations in which this model may not perform well are discussed, and an alternative model that requires additional computations is suggested. PMID:9345087

Round Heat-treated Chromium-molybdenum-steel Tubing Under Combined Loads

NASA Technical Reports Server (NTRS)

Osgood, William R

1943-01-01

The results of tests of round heat-treated chromium-molybdenum-steel tubing are presented. Tests were made on tubing under axial load, bending load, torsional load, combined bending and axial load, combined bending and torsional load, and combined axial, bending, and torsional load. Tensile and compressive tests were made to determine the properties of the material. Formulas are given for the evaluation of the maximum strength of this steel tubing under individual or combined loads. The solution of an example is included to show the procedure to be followed in designing a tubular cantilever member to carry combined loads.

Using Ensemble Decisions and Active Selection to Improve Low-Cost Labeling for Multi-View Data

NASA Technical Reports Server (NTRS)

Rebbapragada, Umaa; Wagstaff, Kiri L.

2011-01-01

This paper seeks to improve low-cost labeling in terms of training set reliability (the fraction of correctly labeled training items) and test set performance for multi-view learning methods. Co-training is a popular multiview learning method that combines high-confidence example selection with low-cost (self) labeling. However, co-training with certain base learning algorithms significantly reduces training set reliability, causing an associated drop in prediction accuracy. We propose the use of ensemble labeling to improve reliability in such cases. We also discuss and show promising results on combining low-cost ensemble labeling with active (low-confidence) example selection. We unify these example selection and labeling strategies under collaborative learning, a family of techniques for multi-view learning that we are developing for distributed, sensor-network environments.

Improve ay101 teaching by single modifications versus unchanged controls: statistically-supported examples

NASA Astrophysics Data System (ADS)

Byrd, Gene G.; Byrd, Dana

2017-06-01

The two main purposes of this paper on improving Ay101 courses are presentations of (1) some very effective single changes and (2) a method to improve teaching by making just single changes which are evaluated statistically versus a control group class. We show how simple statistical comparison can be done even with Excel in Windows. Of course, other more sophisticated and powerful methods could be used if available. One of several examples to be discussed on our poster is our modification of an online introductory astronomy lab course evaluated by the multiple choice final exam. We composed questions related to the learning objectives of the course modules (LOQs). Students could “talk to themselves” by discursively answering these for extra credit prior to the final. Results were compared to an otherwise identical previous unmodified class. Modified classes showed statistically much better final exam average scores (78% vs. 66%). This modification helped those students who most need help. Students in the lower third of the class preferentially answered the LOQs to improve their scores and the class average on the exam. These results also show the effectiveness of relevant extra credit work. Other examples will be discussed as specific examples of evaluating improvement by making one change and then testing it versus a control. Essentially, this is an evolutionary approach in which single favorable “mutations” are retained and the unfavorable removed. The temptation to make more than one change each time must be resisted!

Improved variance estimation of classification performance via reduction of bias caused by small sample size.

PubMed

Wickenberg-Bolin, Ulrika; Göransson, Hanna; Fryknäs, Mårten; Gustafsson, Mats G; Isaksson, Anders

2006-03-13

Supervised learning for classification of cancer employs a set of design examples to learn how to discriminate between tumors. In practice it is crucial to confirm that the classifier is robust with good generalization performance to new examples, or at least that it performs better than random guessing. A suggested alternative is to obtain a confidence interval of the error rate using repeated design and test sets selected from available examples. However, it is known that even in the ideal situation of repeated designs and tests with completely novel samples in each cycle, a small test set size leads to a large bias in the estimate of the true variance between design sets. Therefore different methods for small sample performance estimation such as a recently proposed procedure called Repeated Random Sampling (RSS) is also expected to result in heavily biased estimates, which in turn translates into biased confidence intervals. Here we explore such biases and develop a refined algorithm called Repeated Independent Design and Test (RIDT). Our simulations reveal that repeated designs and tests based on resampling in a fixed bag of samples yield a biased variance estimate. We also demonstrate that it is possible to obtain an improved variance estimate by means of a procedure that explicitly models how this bias depends on the number of samples used for testing. For the special case of repeated designs and tests using new samples for each design and test, we present an exact analytical expression for how the expected value of the bias decreases with the size of the test set. We show that via modeling and subsequent reduction of the small sample bias, it is possible to obtain an improved estimate of the variance of classifier performance between design sets. However, the uncertainty of the variance estimate is large in the simulations performed indicating that the method in its present form cannot be directly applied to small data sets.

[Evaluation in the interest in arts psychotherapy treatment of alcoholics hospitalized for a weaning process--presentation of two clinical examples].

PubMed

Ricci-Boyer, L; Schiltz, L; Spitz, E

2010-01-01

The aim of our study is to show the relevance of art therapeutic treatment with an alcoholic population met in the weaning department of a general hospital. A current tendency of research in psychology consists in using an integrated quantitative and qualitative methodology. This approach is especially suited to the study of the therapeutic intervention. In arts therapeutic research the investigation of the artistic production and the application of a projective test (Rotter) may complete the psychometric tools: SVF 78 Stressverarbeitungsfragebogen by Janke W., Erdmann G., Kallus W.; MDBF Mehrdimensionalen Befindlichkeitsfragebogens by Steyer R., Schwenkmezger P., Notz P., Eid M.. The results of the study show the relevance of our art therapeutic treatment. We are going to illustrate the multidimensional reality of the therapeutic process by two clinical examples.

The Use of Formative Testing in Diagnosing Place Vocabulary Capabilities: A Cross-Cultural Example.

ERIC Educational Resources Information Center

Saveland, Robert N.

A cross-cultural educational research study involving 12,500 students in 13 countries is described, with particular emphasis on one aspect of geographic literacy--place vocabulary skills. Place vocabulary is defined as that component of vocabulary that is concerned with places which are proper nouns and capitalized to show their importance. The…

Creating Realistic Data Sets with Specified Properties via Simulation

ERIC Educational Resources Information Center

Goldman, Robert N.; McKenzie, John D. Jr.

2009-01-01

We explain how to simulate both univariate and bivariate raw data sets having specified values for common summary statistics. The first example illustrates how to "construct" a data set having prescribed values for the mean and the standard deviation--for a one-sample t test with a specified outcome. The second shows how to create a bivariate data…

Computerized Adaptive Testing: An Overview and an Example.

ERIC Educational Resources Information Center

McBride, James R.

The advantages of computerized adaptive testing are discussed, and an example illustrates its use in sixth grade mathematics. These tests are administered at a computer terminal, and the test items to be administered are selected according to the difficulty level appropriate to the individual's ability. Tailoring increases the psychometric…

Integrated testing strategies can be optimal for chemical risk classification.

PubMed

Raseta, Marko; Pitchford, Jon; Cussens, James; Doe, John

2017-08-01

There is an urgent need to refine strategies for testing the safety of chemical compounds. This need arises both from the financial and ethical costs of animal tests, but also from the opportunities presented by new in-vitro and in-silico alternatives. Here we explore the mathematical theory underpinning the formulation of optimal testing strategies in toxicology. We show how the costs and imprecisions of the various tests, and the variability in exposures and responses of individuals, can be assembled rationally to form a Markov Decision Problem. We compute the corresponding optimal policies using well developed theory based on Dynamic Programming, thereby identifying and overcoming some methodological and logical inconsistencies which may exist in the current toxicological testing. By illustrating our methods for two simple but readily generalisable examples we show how so-called integrated testing strategies, where information of different precisions from different sources is combined and where different initial test outcomes lead to different sets of future tests, can arise naturally as optimal policies. Copyright © 2017 Elsevier Inc. All rights reserved.

78 FR 61227 - Public Assistance Cost Estimating Format for Large Projects

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

... itemized breakdown of construction costs for completing the project. For example, a typical project will... percentage factors. For example, if a Part B percentage factor is 2 percent, the estimator adds 2 percent of... specific to the project scope of work. Examples include concrete strength testing, water quality testing...

Building a virtual simulation platform for quasistatic breast ultrasound elastography using open source software: A preliminary investigation.

PubMed

Wang, Yu; Helminen, Emily; Jiang, Jingfeng

2015-09-01

Quasistatic ultrasound elastography (QUE) is being used to augment in vivo characterization of breast lesions. Results from early clinical trials indicated that there was a lack of confidence in image interpretation. Such confidence can only be gained through rigorous imaging tests using complex, heterogeneous but known media. The objective of this study is to build a virtual breast QUE simulation platform in the public domain that can be used not only for innovative QUE research but also for rigorous imaging tests. The main thrust of this work is to streamline biomedical ultrasound simulations by leveraging existing open source software packages including Field II (ultrasound simulator), VTK (geometrical visualization and processing), FEBio [finite element (FE) analysis], and Tetgen (mesh generator). However, integration of these open source packages is nontrivial and requires interdisciplinary knowledge. In the first step, a virtual breast model containing complex anatomical geometries was created through a novel combination of image-based landmark structures and randomly distributed (small) structures. Image-based landmark structures were based on data from the NIH Visible Human Project. Subsequently, an unstructured FE-mesh was created by Tetgen. In the second step, randomly positioned point scatterers were placed within the meshed breast model through an octree-based algorithm to make a virtual breast ultrasound phantom. In the third step, an ultrasound simulator (Field II) was used to interrogate the virtual breast phantom to obtain simulated ultrasound echo data. Of note, tissue deformation generated using a FE-simulator (FEBio) was the basis of deforming the original virtual breast phantom in order to obtain the postdeformation breast phantom for subsequent ultrasound simulations. Using the procedures described above, a full cycle of QUE simulations involving complex and highly heterogeneous virtual breast phantoms can be accomplished for the first time. Representative examples were used to demonstrate capabilities of this virtual simulation platform. In the first set of three ultrasound simulation examples, three heterogeneous volumes of interest were selected from a virtual breast ultrasound phantom to perform sophisticated ultrasound simulations. These resultant B-mode images realistically represented the underlying complex but known media. In the second set of three QUE examples, advanced applications in QUE were simulated. The first QUE example was to show breast tumors with complex shapes and/or compositions. The resultant strain images showed complex patterns that were normally seen in freehand clinical ultrasound data. The second and third QUE examples demonstrated (deformation-dependent) nonlinear strain imaging and time-dependent strain imaging, respectively. The proposed virtual QUE platform was implemented and successfully tested in this study. Through show-case examples, the proposed work has demonstrated its capabilities of creating sophisticated QUE data in a way that cannot be done through the manufacture of physical tissue-mimicking phantoms and other software. This open software architecture will soon be made available in the public domain and can be readily adapted to meet specific needs of different research groups to drive innovations in QUE.

Supersymmetric Adler functions and holography

NASA Astrophysics Data System (ADS)

Iwanaga, Masaya; Karch, Andreas; Sakai, Tadakatsu

2016-09-01

We perform several tests on a recent proposal by Shifman and Stepanyantz for an exact expression for the current correlation functions in supersymmetric gauge theories. We clarify the meaning of the relation in superconformal theories. In particular we show that it automatically follows from known relations between the current correlation functions and anomalies. It therefore also automatically matches between different dual realizations of the same superconformal theory. We use holographic examples as well as calculations in free theories to show that the proposed relation fails in theories with mass terms.

Do sediment type and test durations affect results of laboratory-based, accelerated testing studies of permeable pavement clogging?

PubMed

Nichols, Peter W B; White, Richard; Lucke, Terry

2015-04-01

Previous studies have attempted to quantify the clogging processes of Permeable Interlocking Concrete Pavers (PICPs) using accelerated testing methods. However, the results have been variable. This study investigated the effects that three different sediment types (natural and silica), and different simulated rainfall intensities, and testing durations had on the observed clogging processes (and measured surface infiltration rates) of laboratory-based, accelerated PICP testing studies. Results showed that accelerated simulated laboratory testing results are highly dependent on the type, and size of sediment used in the experiments. For example, when using real stormwater sediment up to 1.18 mm in size, the results showed that neither testing duration, nor stormwater application rate had any significant effect on PICP clogging. However, the study clearly showed that shorter testing durations generally increased clogging and reduced the surface infiltration rates of the models when artificial silica sediment was used. Longer testing durations also generally increased clogging of the models when using fine sediment (<300 μm). Results from this study will help researchers and designers better anticipate when and why PICPs are susceptible to clogging, reduce maintenance and extend the useful life of these increasingly common stormwater best management practices. Copyright © 2015 Elsevier B.V. All rights reserved.

Statistical tests and measures for the presence and influence of digit preference

Treesearch

Jay Beaman; Grenier Michel

1998-01-01

Digit preference which is really showing preference for certain numbers has often described as the heaping or rounding of responses to numbers ending in zero or five. Number preference, NP, has been a topic in the social science literature for some years. However, until recently concepts were not adequately rigorously specified to allow, for example, the estimation of...

Approximate sample size formulas for the two-sample trimmed mean test with unequal variances.

PubMed

Luh, Wei-Ming; Guo, Jiin-Huarng

2007-05-01

Yuen's two-sample trimmed mean test statistic is one of the most robust methods to apply when variances are heterogeneous. The present study develops formulas for the sample size required for the test. The formulas are applicable for the cases of unequal variances, non-normality and unequal sample sizes. Given the specified alpha and the power (1-beta), the minimum sample size needed by the proposed formulas under various conditions is less than is given by the conventional formulas. Moreover, given a specified size of sample calculated by the proposed formulas, simulation results show that Yuen's test can achieve statistical power which is generally superior to that of the approximate t test. A numerical example is provided.

Sierra/SolidMechanics 4.48 Verification Tests Manual.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose

2018-03-01

Presented in this document is a small portion of the tests that exist in the Sierra / SolidMechanics (Sierra / SM) verification test suite. Most of these tests are run nightly with the Sierra / SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra / SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This documentmore » can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra / SM Example Problems Manual. Note, many other verification tests exist in the Sierra / SM test suite, but have not yet been included in this manual.« less

Sierra/SolidMechanics 4.48 Verification Tests Manual.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plews, Julia A.; Crane, Nathan K.; de Frias, Gabriel Jose

Presented in this document is a small portion of the tests that exist in the Sierra / SolidMechanics (Sierra / SM) verification test suite. Most of these tests are run nightly with the Sierra / SM code suite, and the results of the test are checked versus the correct analytical result. For each of the tests presented in this document, the test setup, a description of the analytic solution, and comparison of the Sierra / SM code results to the analytic solution is provided. Mesh convergence is also checked on a nightly basis for several of these tests. This documentmore » can be used to confirm that a given code capability is verified or referenced as a compilation of example problems. Additional example problems are provided in the Sierra / SM Example Problems Manual. Note, many other verification tests exist in the Sierra / SM test suite, but have not yet been included in this manual.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Chanyoung; Kim, Nam H.

Structural elements, such as stiffened panels and lap joints, are basic components of aircraft structures. For aircraft structural design, designers select predesigned elements satisfying the design load requirement based on their load-carrying capabilities. Therefore, estimation of safety envelope of structural elements for load tolerances would be a good investment for design purpose. In this article, a method of estimating safety envelope is presented using probabilistic classification, which can estimate a specific level of failure probability under both aleatory and epistemic uncertainties. An important contribution of this article is that the calculation uncertainty is reflected in building a safety envelope usingmore » Gaussian process, and the effect of element test data on reducing the calculation uncertainty is incorporated by updating the Gaussian process model with the element test data. It is shown that even one element test can significantly reduce the calculation uncertainty due to lacking knowledge of actual physics, so that conservativeness in a safety envelope is significantly reduced. The proposed approach was demonstrated with a cantilever beam example, which represents a structural element. The example shows that calculation uncertainty provides about 93% conservativeness against the uncertainty due to a few element tests. As a result, it is shown that even a single element test can increase the load tolerance modeled with the safety envelope by 20%.« less

Protein Electrophoresis/Immunofixation Electrophoresis

MedlinePlus

... underlying disease. Follow-up tests may include, for example, albumin , immunoelectrophoresis, serum free light chains , quantitative immunoglobuins , ... the disease and the effectiveness of treatment. Some examples of when an electrophoresis test may be ordered ...

Blood Gases Test

MedlinePlus

... a pH, carbon dioxide/oxygen, or electrolyte imbalance. Examples include uncontrolled diabetes , which can lead to ketoacidosis ... acid from the stomach), and sodium bicarbonate overdose. Examples of test results associated with the above conditions ...

A personalized and control systems engineering conceptual approach to target childhood anxiety in the contexts of cultural diversity.

PubMed

Pina, Armando A; Holly, Lindsay E; Zerr, Argero A; Rivera, Daniel E

2014-01-01

In the child and adolescent anxiety area, some progress has been made to develop evidence-based prevention protocols, but less is known about how to best target these problems in children and families of color. In general, data show differential program effects with some minority children benefiting significantly less. Our preliminary data, however, show promise and suggest cultural parameters to consider in the tailoring process beyond language and cultural symbols. It appears that a more focused approach to culture might help activate intervention components and its intended effects by focusing, for example, on the various facets of familismo when working with some Mexican parents. However, testing the effects and nuances of cultural adaption vis-à-vis a focused personalized approach is methodologically challenging. For this reason, we identify control systems engineering design methods and provide example scenarios relevant to our data and recent intervention work.

Assessing the Use of Employment Screening for Sexual Assault Prevention

DTIC Science & Technology

2017-01-01

designed to address. For example, one meta-analysis found the average validity coefficient, or association, between integrity tests and job performance...or a more-general trait), and the group that is tested . For example, one meta-analysis found stronger associations between integrity tests and self... Tests Overt and personality-based integrity tests use questions designed to address somewhat different but overlapping content areas ( Ones

Finite element procedures for time-dependent convection-diffusion-reaction systems

NASA Technical Reports Server (NTRS)

Tezduyar, T. E.; Park, Y. J.; Deans, H. A.

1988-01-01

New finite element procedures based on the streamline-upwind/Petrov-Galerkin formulations are developed for time-dependent convection-diffusion-reaction equations. These procedures minimize spurious oscillations for convection-dominated and reaction-dominated problems. The results obtained for representative numerical examples are accurate with minimal oscillations. As a special application problem, the single-well chemical tracer test (a procedure for measuring oil remaining in a depleted field) is simulated numerically. The results show the importance of temperature effects on the interpreted value of residual oil saturation from such tests.

Improving Bayesian credibility intervals for classifier error rates using maximum entropy empirical priors.

PubMed

Gustafsson, Mats G; Wallman, Mikael; Wickenberg Bolin, Ulrika; Göransson, Hanna; Fryknäs, M; Andersson, Claes R; Isaksson, Anders

2010-06-01

Successful use of classifiers that learn to make decisions from a set of patient examples require robust methods for performance estimation. Recently many promising approaches for determination of an upper bound for the error rate of a single classifier have been reported but the Bayesian credibility interval (CI) obtained from a conventional holdout test still delivers one of the tightest bounds. The conventional Bayesian CI becomes unacceptably large in real world applications where the test set sizes are less than a few hundred. The source of this problem is that fact that the CI is determined exclusively by the result on the test examples. In other words, there is no information at all provided by the uniform prior density distribution employed which reflects complete lack of prior knowledge about the unknown error rate. Therefore, the aim of the study reported here was to study a maximum entropy (ME) based approach to improved prior knowledge and Bayesian CIs, demonstrating its relevance for biomedical research and clinical practice. It is demonstrated how a refined non-uniform prior density distribution can be obtained by means of the ME principle using empirical results from a few designs and tests using non-overlapping sets of examples. Experimental results show that ME based priors improve the CIs when employed to four quite different simulated and two real world data sets. An empirically derived ME prior seems promising for improving the Bayesian CI for the unknown error rate of a designed classifier. Copyright 2010 Elsevier B.V. All rights reserved.

Evaluation of Performance of Laboratories and Manufacturers Within the Framework of the IFCC model for Quality Targets of HbA1c.

PubMed

Weykamp, Cas; Siebelder, Carla

2017-11-01

HbA1c is a key parameter in diabetes management. For years the test has been used exclusively for monitoring of long-term diabetic control. However, due to improvement of the performance, HbA1c is considered more and more for diagnosis and screening. With this new application, quality demands further increase. A task force of the International Federation of Clinical Chemistry and Laboratory Medicine developed a model to set and evaluate quality targets for HbA1c. The model is based on the concept of total error and takes into account the major sources of analytical errors in the medical laboratory: bias and imprecision. Performance criteria are derived from sigma-metrics and biological variation. This review shows 2 examples of the application of the model: at the level of single laboratories, and at the level of a group of laboratories. In the first example data of 125 individual laboratories of a recent external quality assessment program in the Netherlands are evaluated. Differences between laboratories as well as their relation to method principles are shown. The second example uses recent and 3-year-old data of the proficiency test of the College of American Pathologists. The differences in performance between 26 manufacturer-related groups of laboratories are shown. Over time these differences are quite consistent although some manufacturers improved substantially either by better standardization or by replacing a test. The IFCC model serves all who are involved in HbA1c testing in the ongoing process of better performance and better patient care.

Phagocytosis as a biomarker for stress responses

NASA Astrophysics Data System (ADS)

Huber, K.; Krotz-Fahning, M.; Hock, B.

2005-08-01

An in vitro test has been developed for the detection of immunotoxic events. It will be used within the project "TRIPLE LUX" on the International Space Station to investigate the effects of single and combined space flight conditions on mammalian phagocytes. The intensity of the respiratory burst during phagocytosis can be followed by the luminol-based chemiluminescence response after stimulation with zymosan. We adapted this test system for polymorphonuclear leukocytes, purified from sheep blood and stored by cryoconservation. In this report we show the immunostimulating effect of hydrocortisone and the immunosuppressive impact of cadmium as an example for alterations that can be detected by this test.

Certification of highly complex safety-related systems.

PubMed

Reinert, D; Schaefer, M

1999-01-01

The BIA has now 15 years of experience with the certification of complex electronic systems for safety-related applications in the machinery sector. Using the example of machining centres this presentation will show the systematic procedure for verifying and validating control systems using Application Specific Integrated Circuits (ASICs) and microcomputers for safety functions. One section will describe the control structure of machining centres with control systems using "integrated safety." A diverse redundant architecture combined with crossmonitoring and forced dynamization is explained. In the main section the steps of the systematic certification procedure are explained showing some results of the certification of drilling machines. Specification reviews, design reviews with test case specification, statistical analysis, and walk-throughs are the analytical measures in the testing process. Systematic tests based on the test case specification, Electro Magnetic Interference (EMI), and environmental testing, and site acceptance tests on the machines are the testing measures for validation. A complex software driven system is always undergoing modification. Most of the changes are not safety-relevant but this has to be proven. A systematic procedure for certifying software modifications is presented in the last section of the paper.

pyres: a Python wrapper for electrical resistivity modeling with R2

NASA Astrophysics Data System (ADS)

Befus, Kevin M.

2018-04-01

A Python package, pyres, was written to handle common as well as specialized input and output tasks for the R2 electrical resistivity (ER) modeling program. Input steps including handling field data, creating quadrilateral or triangular meshes, and data filtering allow repeatable and flexible ER modeling within a programming environment. pyres includes non-trivial routines and functions for locating and constraining specific known or separately-parameterized regions in both quadrilateral and triangular meshes. Three basic examples of how to run forward and inverse models with pyres are provided. The importance of testing mesh convergence and model sensitivity are also addressed with higher-level examples that show how pyres can facilitate future research-grade ER analyses.

Vortex loops and Majoranas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chesi, Stefano; CEMS, RIKEN, Wako, Saitama 351-0198; Jaffe, Arthur

2013-11-15

We investigate the role that vortex loops play in characterizing eigenstates of interacting Majoranas. We give some general results and then focus on ladder Hamiltonian examples as a test of further ideas. Two methods yield exact results: (i) A mapping of certain spin Hamiltonians to quartic interactions of Majoranas shows that the spectra of these two examples coincide. (ii) In cases with reflection-symmetric Hamiltonians, we use reflection positivity for Majoranas to characterize vortices in the ground states. Two additional methods suggest wider applicability of these results: (iii) Numerical evidence suggests similar behavior for certain systems without reflection symmetry. (iv) Amore » perturbative analysis also suggests similar behavior without the assumption of reflection symmetry.« less

Tinkering With AGCMs To Investigate Atmospheric Behavior

NASA Astrophysics Data System (ADS)

Bitz, C. M.

2014-12-01

My experience teaching a course in global climate modeling has proven that students (and instructors) with wide-ranging backgrounds in earth-science learn effectively about the complexity of climate by tinker with model components. As an example, I will present a series of experiments in an AGCM with highly simplified geometries for ocean and land to test the response of the atmosphere to variations in basic parameters. The figure below shows an example of how the zonal wind changes with surface roughness and orography. The pinnacle of experiments explored in my course was the outcome of a homework assignment where students reduced the cloud droplet radius by 40% over ocean, and the results surprised students and instructor alike.

Could situational judgement tests be used for selection into dental foundation training?

PubMed

Patterson, F; Ashworth, V; Mehra, S; Falcon, H

2012-07-13

To pilot and evaluate a machine-markable situational judgement test (SJT) designed to select candidates into UK dental foundation training. Single centre pilot study. UK postgraduate deanery in 2010. Seventy-four candidates attending interview for dental foundation training in Oxford and Wessex Deaneries volunteered to complete the situational judgement test. The situational judgement test was developed to assess relevant professional attributes for dentistry (for example, empathy and integrity) in a machine-markable format. Test content was developed by subject matter experts working with experienced psychometricians. Evaluation of psychometric properties of the pilot situational judgement test (for example, reliability, validity and fairness). Scores in the dental foundation training selection process (short-listing and interviews) were used to examine criterion-related validity. Candidates completed an evaluation questionnaire to examine candidate reactions and face validity of the new test. Forty-six candidates were female and 28 male; mean age was 23.5-years-old (range 22-32). Situational judgement test scores were normally distributed and the test showed good internal reliability when corrected for test length (α = 0.74). Situational judgement test scores positively correlated with the management, leadership and professionalism interview (N = 50; r = 0.43, p <0.01) but not with the clinical skills interview, providing initial evidence of criterion-related validity as the situational judgement test is designed to test non-cognitive professional attributes beyond clinical knowledge. Most candidates perceived the situational judgement test as relevant to dentistry, appropriate for their training level, and fair. This initial pilot study suggests that a situational judgement test is an appropriate and innovative method to measure professional attributes (eg empathy and integrity) for selection into foundation training. Further research will explore the long-term predictive validity of the situational judgement test once candidates have entered training.

Testing Understanding and Understanding Testing.

ERIC Educational Resources Information Center

Pedersen, Jean; Ross, Peter

1985-01-01

Provides examples in which graphs are used in the statements of problems or in their solutions as a means of testing understanding of mathematical concepts. Examples (appropriate for a beginning course in calculus and analytic geometry) include slopes of lines and curves, quadratic formula, properties of the definite integral, and others. (JN)

The Whole AMS Matrix: Using the Owens Lake, Ardath Slump, and Gaviota Slide cores to explore classification of ellipsoid shapes

NASA Astrophysics Data System (ADS)

Schwehr, K.; Driscoll, N.; Tauxe, L.

2004-12-01

Categorizing sediment history using Anisotropy of Magnetic Susceptibility (AMS) has been a long standing challenge for the paleomagnetic community. The goal is to have a robust test of shape fabrics that allows workers to classify sediments in terms of being primary depositional fabric, deposition in with currents, or altered fabrics. Additionally, it is important to be able to distinguish altered fabrics into such classes as slumps, crypto-slumps, drilling deformation (such as fluidization from drilling mud and flow-in), and so forth. To try to bring a unified test scheme to AMS interpretation, we are using three example test cases. First is the Owens Lake OL92 core, which has provided previous workers with a long core example in a lacustrian environment. OL92 was classified into five zones based on visual observations of the core photographs. Using these groupings, Rosenbaum et al. (2000) was able to use the deflection of the minimum eigen vector from vertical to classify each individual AMS sample. Second is the Ardath Shale location, which provides a clear case of a lithified outcrop scale problem that showed success with the bootstrap eigen value test. Finally is the Gaviota Slide in the Santa Barbara Basin, which provides usage of 1-2 meter gravity cores. Previous work has focused on Flinn, Jelinek, and bootstrap plots of eigen values. In supporting the shape characterization we have also used a 95% confidence F-Test by means of Hext's statistical work. We have extended the F-Test into a promising new plot of the F12 and F23 confidence values, which shows good clustering in early tests. We have applied all of the available techniques to the above three test cases and will present how each technique either succeeds or fails. Since each method has its own strengths and weaknesses, it is clear that the community needs to carefully evaluate which technique should be applied to any particular problem.

Elementary test for nonclassicality based on measurements of position and momentum

NASA Astrophysics Data System (ADS)

Fresta, Luca; Borregaard, Johannes; Sørensen, Anders S.

2015-12-01

We generalize a nonclassicality test described by Kot et al. [Phys. Rev. Lett. 108, 233601 (2012), 10.1103/PhysRevLett.108.233601], which can be used to rule out any classical description of a physical system. The test is based on measurements of quadrature operators and works by proving a contradiction with the classical description in terms of a probability distribution in phase space. As opposed to the previous work, we generalize the test to include states without rotational symmetry in phase space. Furthermore, we compare the performance of the nonclassicality test with classical tomography methods based on the inverse Radon transform, which can also be used to establish the quantum nature of a physical system. In particular, we consider a nonclassicality test based on the so-called filtered back-projection formula. We show that the general nonclassicality test is conceptually simpler, requires less assumptions on the system, and is statistically more reliable than the tests based on the filtered back-projection formula. As a specific example, we derive the optimal test for quadrature squeezed single-photon states and show that the efficiency of the test does not change with the degree of squeezing.

Pedagogies in Action: A Community Resource Linking Teaching Methods to Examples of their Use

NASA Astrophysics Data System (ADS)

Manduca, C. A.; Fox, S. P.; Iverson, E. A.; Kirk, K.; Ormand, C. J.

2009-12-01

The Pedagogies in Action portal (http://serc.carleton.edu/sp) provides access to information on more than 40 teaching methods with examples of their use in geoscience and beyond. Each method is described with pages addressing what the method is, why or when it is useful, and how it can be implemented. New methods added this year include Teaching with Google Earth, Jigsaw, Teaching the Process of Science, Guided Discovery Problems, Teaching Urban Students, and Using ConceptTests. Examples then show specifically how the method has been used to teach concepts in a variety of disciplines. The example collection now includes 775 teaching activities of which more than 550 are drawn from the geosciences. Geoscience faculty are invited to add their own examples to this collection or to test examples in the collection and provide a review. Evaluation results show that the combination of modules and activities inspires teachers at all levels to use a new pedagogy and increases their confidence that they can use it successfully. In addition, submitting activities to the collection, including writing summary information for other instructors, helps them think more carefully about the design of their activity. The activity collections are used both for ready to use activities and to find ideas for new activities. The portal provides overarching access to materials developed by a wide variety of collaborating partners each of which uses the service to create a customized pedagogic portal addressing a more specific audience. Of interest to AGU members are pedagogic portals on Starting Point: Teaching Introductory Geoscience (http://serc.carleton.edu/introgeo); On the Cutting Edge (http://serc.carleton.edu/NAGTWorkshops); Enduring Resources for Earth System Education (http://earthref.org/ERESE) Microbial Life Educational Resources (http://serc.carleton.edu/microbe_life); the National Numeracy Network (http://serc.carleton.edu/nnn/index.html); CAUSE: The Consortium for Undergraduate Statistics Education (http://causeweb.org); ComPADRE: Digital Resources for Physics and Astronomy Education (http://www.compadre.org) and Project Kaleidoscope (http://pkal.org). Pedagogies in Action is part of the National Science Digital Library (http://nsdl.org). Projects or groups interested in exploring use of the service can find information about using the service on the project website or contact the authors.

Safety envelope for load tolerance of structural element design based on multi-stage testing

DOE PAGES

Park, Chanyoung; Kim, Nam H.

2016-09-06

Structural elements, such as stiffened panels and lap joints, are basic components of aircraft structures. For aircraft structural design, designers select predesigned elements satisfying the design load requirement based on their load-carrying capabilities. Therefore, estimation of safety envelope of structural elements for load tolerances would be a good investment for design purpose. In this article, a method of estimating safety envelope is presented using probabilistic classification, which can estimate a specific level of failure probability under both aleatory and epistemic uncertainties. An important contribution of this article is that the calculation uncertainty is reflected in building a safety envelope usingmore » Gaussian process, and the effect of element test data on reducing the calculation uncertainty is incorporated by updating the Gaussian process model with the element test data. It is shown that even one element test can significantly reduce the calculation uncertainty due to lacking knowledge of actual physics, so that conservativeness in a safety envelope is significantly reduced. The proposed approach was demonstrated with a cantilever beam example, which represents a structural element. The example shows that calculation uncertainty provides about 93% conservativeness against the uncertainty due to a few element tests. As a result, it is shown that even a single element test can increase the load tolerance modeled with the safety envelope by 20%.« less

A proven elastomer compound for extremely hostile geothermal and oil field environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirasuna, A.R.; Friese, G.J.; Stephens, C.A.

1983-02-01

Since 1979 the Y267 EPDM elastomer has been independently tested by other organizations in a variety of field and laboratory applications. The following are some examples. The same Y267 EPDM O-rings worked with no leaks as logging tool seals for multiple trips to 4600M (15k ft.) at 320/sup 0/C (608F) BHST. A packer element performed flawlessly for five months in a 204/sup 0/C (400F) continuous steam injection well and was retrieved at the end of the test in an as-new condition. A high-pressure Y267 EPDM packer test was performed with complete success at 232/sup 0/C (450F) for a 7.5 daymore » test in sour crude with differential pressures to 138 MPa (20 ksi) and the seal condition was only very slightly changed by the test. Comprehensive compatibility testing of 34 compounds from 15 companies in geothermal brine, isobutane, and oil at 191C-266/sup 0/C (375-510F) showed that the Y267 EPDM was best of the 34 in all three fluids. Over 15 laboratory and over 20 field case histories of Y267 EPDM such as the above examples are reported. All strongly establish that Y267 EPDM is at the cutting edge of technology.« less

Electrical Subsystems Flight Test Handbook

DTIC Science & Technology

1984-01-01

distribution of this handbook to the public at large, or by DDC to the National Technical Information Service (NTIS). At NTIS, it will be available to...Abnormal Mode 58 Emergency Mode 61 Instrumentation 62 Test Information Sheets 62 Integration with Flight Test Program 62 DATA MEASUREMENT, ANALYS IS...AND EVALUATION 65 REFERENCES 73 -APPENDIX A - EXAMPLE OF TEST INFORMATION SHEET 75 APPENDIX B - EXAMPLE OF TEST PLAN SAFETY REVIEW 85 APPENDIX C

Local residue coupling strategies by neural network for InSAR phase unwrapping

NASA Astrophysics Data System (ADS)

Refice, Alberto; Satalino, Giuseppe; Chiaradia, Maria T.

1997-12-01

Phase unwrapping is one of the toughest problems in interferometric SAR processing. The main difficulties arise from the presence of point-like error sources, called residues, which occur mainly in close couples due to phase noise. We present an assessment of a local approach to the resolution of these problems by means of a neural network. Using a multi-layer perceptron, trained with the back- propagation scheme on a series of simulated phase images, fashion the best pairing strategies for close residue couples. Results show that god efficiencies and accuracies can have been obtained, provided a sufficient number of training examples are supplied. Results show that good efficiencies and accuracies can be obtained, provided a sufficient number of training examples are supplied. The technique is tested also on real SAR ERS-1/2 tandem interferometric images of the Matera test site, showing a good reduction of the residue density. The better results obtained by use of the neural network as far as local criteria are adopted appear justified given the probabilistic nature of the noise process on SAR interferometric phase fields and allows to outline a specifically tailored implementation of the neural network approach as a very fast pre-processing step intended to decrease the residue density and give sufficiently clean images to be processed further by more conventional techniques.

Finite element method formulation in polar coordinates for transient heat conduction problems

NASA Astrophysics Data System (ADS)

Duda, Piotr

2016-04-01

The aim of this paper is the formulation of the finite element method in polar coordinates to solve transient heat conduction problems. It is hard to find in the literature a formulation of the finite element method (FEM) in polar or cylindrical coordinates for the solution of heat transfer problems. This document shows how to apply the most often used boundary conditions. The global equation system is solved by the Crank-Nicolson method. The proposed algorithm is verified in three numerical tests. In the first example, the obtained transient temperature distribution is compared with the temperature obtained from the presented analytical solution. In the second numerical example, the variable boundary condition is assumed. In the last numerical example the component with the shape different than cylindrical is used. All examples show that the introduction of the polar coordinate system gives better results than in the Cartesian coordinate system. The finite element method formulation in polar coordinates is valuable since it provides a higher accuracy of the calculations without compacting the mesh in cylindrical or similar to tubular components. The proposed method can be applied for circular elements such as boiler drums, outlet headers, flux tubes. This algorithm can be useful during the solution of inverse problems, which do not allow for high density grid. This method can calculate the temperature distribution in the bodies of different properties in the circumferential and the radial direction. The presented algorithm can be developed for other coordinate systems. The examples demonstrate a good accuracy and stability of the proposed method.

Atomistic simulations of stainless steels: a many-body potential for the Fe-Cr-C system.

PubMed

Henriksson, K O E; Björkas, C; Nordlund, K

2013-11-06

Stainless steels found in real-world applications usually have some C content in the base Fe-Cr alloy, resulting in hard and dislocation-pinning carbides-Fe3C (cementite) and Cr23C6-being present in the finished steel product. The higher complexity of the steel microstructure has implications, for example, for the elastic properties and the evolution of defects such as Frenkel pairs and dislocations. This makes it necessary to re-evaluate the effects of basic radiation phenomena and not simply to rely on results obtained from purely metallic Fe-Cr alloys. In this report, an analytical interatomic potential parameterization in the Abell-Brenner-Tersoff form for the entire Fe-Cr-C system is presented to enable such calculations. The potential reproduces, for example, the lattice parameter(s), formation energies and elastic properties of the principal Fe and Cr carbides (Fe3C, Fe5C2, Fe7C3, Cr3C2, Cr7C3, Cr23C6), the Fe-Cr mixing energy curve, formation energies of simple C point defects in Fe and Cr, and the martensite lattice anisotropy, with fair to excellent agreement with empirical results. Tests of the predictive power of the potential show, for example, that Fe-Cr nanowires and bulk samples become elastically stiffer with increasing Cr and C concentrations. High-concentration nanowires also fracture at shorter relative elongations than wires made of pure Fe. Also, tests with Fe3C inclusions show that these act as obstacles for edge dislocations moving through otherwise pure Fe.

Atomistic simulations of stainless steels: a many-body potential for the Fe-Cr-C system

NASA Astrophysics Data System (ADS)

Henriksson, K. O. E.; Björkas, C.; Nordlund, K.

2013-11-01

Stainless steels found in real-world applications usually have some C content in the base Fe-Cr alloy, resulting in hard and dislocation-pinning carbides—Fe3C (cementite) and Cr23C6—being present in the finished steel product. The higher complexity of the steel microstructure has implications, for example, for the elastic properties and the evolution of defects such as Frenkel pairs and dislocations. This makes it necessary to re-evaluate the effects of basic radiation phenomena and not simply to rely on results obtained from purely metallic Fe-Cr alloys. In this report, an analytical interatomic potential parameterization in the Abell-Brenner-Tersoff form for the entire Fe-Cr-C system is presented to enable such calculations. The potential reproduces, for example, the lattice parameter(s), formation energies and elastic properties of the principal Fe and Cr carbides (Fe3C, Fe5C2, Fe7C3, Cr3C2, Cr7C3, Cr23C6), the Fe-Cr mixing energy curve, formation energies of simple C point defects in Fe and Cr, and the martensite lattice anisotropy, with fair to excellent agreement with empirical results. Tests of the predictive power of the potential show, for example, that Fe-Cr nanowires and bulk samples become elastically stiffer with increasing Cr and C concentrations. High-concentration nanowires also fracture at shorter relative elongations than wires made of pure Fe. Also, tests with Fe3C inclusions show that these act as obstacles for edge dislocations moving through otherwise pure Fe.

Environmental characterisation of coal mine waste rock in the field: an example from New Zealand

NASA Astrophysics Data System (ADS)

Hughes, J.; Craw, D.; Peake, B.; Lindsay, P.; Weber, P.

2007-08-01

Characterisation of mine waste rock with respect to acid generation potential is a necessary part of routine mine operations, so that environmentally benign waste rock stacks can be constructed for permanent storage. Standard static characterisation techniques, such as acid neutralisation capacity (ANC), maximum potential acidity, and associated acid-base accounting, require laboratory tests that can be difficult to obtain rapidly at remote mine sites. We show that a combination of paste pH and a simple portable carbonate dissolution test, both techniques that can be done in the field in a 15 min time-frame, is useful for distinguishing rocks that are potentially acid-forming from those that are acid-neutralising. Use of these techniques could allow characterisation of mine wastes at the metre scale during mine excavation operations. Our application of these techniques to pyrite-bearing (total S = 1-4 wt%) but variably calcareous coal mine overburden shows that there is a strong correlation between the portable carbonate dissolution technique and laboratory-determined ANC measurements (range of 0-10 wt% calcite equivalent). Paste pH measurements on the same rocks are bimodal, with high-sulphur, low-calcite rocks yielding pH near 3 after 10 min, whereas high-ANC rocks yield paste pH of 7-8. In our coal mine example, the field tests were most effective when used in conjunction with stratigraphy. However, the same field tests have potential for routine use in any mine in which distinction of acid-generating rocks from acid-neutralising rocks is required. Calibration of field-based acid-base accounting characteristics of the rocks with laboratory-based static and/or kinetic tests is still necessary.

Domain knowledge patterns in pedagogical diagnostics

NASA Astrophysics Data System (ADS)

Miarka, Rostislav

2017-07-01

This paper shows a proposal of representation of knowledge patterns in RDF(S) language. Knowledge patterns are used for reuse of knowledge. They can be divided into two groups - Top-level knowledge patterns and Domain knowledge patterns. Pedagogical diagnostics is aimed at testing of knowledge of students at primary and secondary school. An example of domain knowledge pattern from pedagogical diagnostics is part of this paper.

Practical scheme for optimal measurement in quantum interferometric devices

NASA Astrophysics Data System (ADS)

Takeoka, Masahiro; Ban, Masashi; Sasaki, Masahide

2003-06-01

We apply a Kennedy-type detection scheme, which was originally proposed for a binary communications system, to interferometric sensing devices. We show that the minimum detectable perturbation of the proposed system reaches the ultimate precision bound which is predicted by quantum Neyman-Pearson hypothesis testing. To provide concrete examples, we apply our interferometric scheme to phase shift detection by using coherent and squeezed probe fields.

Analysis Techniques, Materials, and Methods for Treatment of Thermal Bridges in Building Envelopes

DTIC Science & Technology

2013-08-01

effects of the R-value for given increment of time ............................................. 89 64 Crystals on a post-conditioned Aspen Aerogel ... aerogel on specific sites compared to conventional polyurethane foam insulation. Figures 55 and 56 show two examples of preliminary parametric... Aerogel , and (4) Honeywell’s polyurethane. Table 14 lists the four tested insulation ma- terials, their experimental thermal properties (derived

Characterization and Dynamic Analysis of Long-Cavity Multi-Section Gain- Levered Quantum-Dot Lasers

DTIC Science & Technology

2013-03-01

test setup .................................................................... 8 Figure 5: Comparison of a Fabry – Perot and distributed feedback...for example Fabry – Perot and distributed-feedback designs), with each possessing advantages and disadvantages that will be discussed in detail in...contrast to Fabry – Perot cavities (two discrete mirrors) that result in lasing over multiple longitudinal modes supported by the cavity. Figure 5 shows

"The Tower in Red and Yellow": Using Children's Drawings in Formative Research for "Alam Simsim," an Educational Television Series for Egyptian Children.

ERIC Educational Resources Information Center

Montasser, Alyaa; Cole, Charlotte; Fuld, Janice

2002-01-01

Provides examples from a study of six test segments of the television series "Alam Simsim," the Egyptian "Sesame Street," to illustrate how a systematic analysis of children's artwork can be used with other research tools to gain feedback from children. Shows how formative research is used to bring children into the production…

Resistive-strips micromegas detectors with two-dimensional readout

NASA Astrophysics Data System (ADS)

Byszewski, M.; Wotschack, J.

2012-02-01

Micromegas detectors show very good performance for charged particle tracking in high rate environments as for example at the LHC. It is shown that two coordinates can be extracted from a single gas gap in these detectors. Several micromegas chambers with spark protection by resistive strips and two-dimensional readout have been tested in the context of the R&D work for the ATLAS Muon System upgrade.

14 CFR 91.1047 - Drug and alcohol misuse education program.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Information on the substances that they test for, for example, alcohol and a list of the drugs; (2) The categories of employees tested, the types of tests, for example, pre-employment, random, reasonable cause/suspicion, post accident, return to duty and follow-up; and (3) The degree to which the program manager's...

14 CFR 91.1047 - Drug and alcohol misuse education program.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Information on the substances that they test for, for example, alcohol and a list of the drugs; (2) The categories of employees tested, the types of tests, for example, pre-employment, random, reasonable cause/suspicion, post accident, return to duty and follow-up; and (3) The degree to which the program manager's...

14 CFR 91.1047 - Drug and alcohol misuse education program.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Information on the substances that they test for, for example, alcohol and a list of the drugs; (2) The categories of employees tested, the types of tests, for example, pre-employment, random, reasonable cause/suspicion, post accident, return to duty and follow-up; and (3) The degree to which the program manager's...

14 CFR 91.1047 - Drug and alcohol misuse education program.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Information on the substances that they test for, for example, alcohol and a list of the drugs; (2) The categories of employees tested, the types of tests, for example, pre-employment, random, reasonable cause/suspicion, post accident, return to duty and follow-up; and (3) The degree to which the program manager's...

14 CFR 91.1047 - Drug and alcohol misuse education program.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) Information on the substances that they test for, for example, alcohol and a list of the drugs; (2) The categories of employees tested, the types of tests, for example, pre-employment, random, reasonable cause/suspicion, post accident, return to duty and follow-up; and (3) The degree to which the program manager's...

Pathology Reports

MedlinePlus

... pathology report will include the results of these tests. For example, the pathology report may include information obtained from ... markers or indicators of a specific cancer. For example, the Philadelphia chromosome ... ( 3 ). Some tests that might be performed on a tissue sample ...

Hypothesis testing for band size detection of high-dimensional banded precision matrices.

PubMed

An, Baiguo; Guo, Jianhua; Liu, Yufeng

2014-06-01

Many statistical analysis procedures require a good estimator for a high-dimensional covariance matrix or its inverse, the precision matrix. When the precision matrix is banded, the Cholesky-based method often yields a good estimator of the precision matrix. One important aspect of this method is determination of the band size of the precision matrix. In practice, crossvalidation is commonly used; however, we show that crossvalidation not only is computationally intensive but can be very unstable. In this paper, we propose a new hypothesis testing procedure to determine the band size in high dimensions. Our proposed test statistic is shown to be asymptotically normal under the null hypothesis, and its theoretical power is studied. Numerical examples demonstrate the effectiveness of our testing procedure.

Supersymmetric Adler functions and holography

DOE PAGES

Iwanaga, Masaya; Karch, Andreas; Sakai, Tadakatsu

2016-09-16

Here, we perform several tests on a recent proposal by Shifman and Stepanyantz for an exact expression for the current correlation functions in supersymmetric gauge theories. We clarify the meaning of the relation in superconformal theories. In particular we show that it automatically follows from known relations between the current correlation functions and anomalies. It therefore also automatically matches between different dual realizations of the same superconformal theory. We use holographic examples as well as calculations in free theories to show that the proposed relation fails in theories with mass terms.

[Evidence-based pedagogical principles used at medical specialist workshop].

PubMed

Holm, Ellen Astrid; Rosholm, Jens Ulrik; Mørch, Marianne Metz

2010-09-27

How should a theoretical postgraduate course be organized to obtain maximum effect? We report an example of a two-day course planned and implemented according to educational approaches previously shown to be effective. The theme of the course is "The old patient", and the course is compulsory for residents in internal medicine. This case study showed that the methods used were feasible, and the participants gained knowledge. A multiple-choice test before and after the course showed 44% (before) and 64% (after) correct answers, p < 0.001.

Comparison of six methods for the detection of causality in a bivariate time series

NASA Astrophysics Data System (ADS)

Krakovská, Anna; Jakubík, Jozef; Chvosteková, Martina; Coufal, David; Jajcay, Nikola; Paluš, Milan

2018-04-01

In this comparative study, six causality detection methods were compared, namely, the Granger vector autoregressive test, the extended Granger test, the kernel version of the Granger test, the conditional mutual information (transfer entropy), the evaluation of cross mappings between state spaces, and an assessment of predictability improvement due to the use of mixed predictions. Seven test data sets were analyzed: linear coupling of autoregressive models, a unidirectional connection of two Hénon systems, a unidirectional connection of chaotic systems of Rössler and Lorenz type and of two different Rössler systems, an example of bidirectionally connected two-species systems, a fishery model as an example of two correlated observables without a causal relationship, and an example of mediated causality. We tested not only 20 000 points long clean time series but also noisy and short variants of the data. The standard and the extended Granger tests worked only for the autoregressive models. The remaining methods were more successful with the more complex test examples, although they differed considerably in their capability to reveal the presence and the direction of coupling and to distinguish causality from mere correlation.

Detecting Multiple Model Components with the Likelihood Ratio Test

NASA Astrophysics Data System (ADS)

Protassov, R. S.; van Dyk, D. A.

2000-05-01

The likelihood ratio test (LRT) and F-test popularized in astrophysics by Bevington (Data Reduction and Error Analysis in the Physical Sciences ) and Cash (1977, ApJ 228, 939), do not (even asymptotically) adhere to their nominal χ2 and F distributions in many statistical tests commonly used in astrophysics. The many legitimate uses of the LRT (see, e.g., the examples given in Cash (1977)) notwithstanding, it can be impossible to compute the false positive rate of the LRT or related tests such as the F-test. For example, although Cash (1977) did not suggest the LRT for detecting a line profile in a spectral model, it has become common practice despite the lack of certain required mathematical regularity conditions. Contrary to common practice, the nominal distribution of the LRT statistic should not be used in these situations. In this paper, we characterize an important class of problems where the LRT fails, show the non-standard behavior of the test in this setting, and provide a Bayesian alternative to the LRT, i.e., posterior predictive p-values. We emphasize that there are many legitimate uses of the LRT in astrophysics, and even when the LRT is inappropriate, there remain several statistical alternatives (e.g., judicious use of error bars and Bayes factors). We illustrate this point in our analysis of GRB 970508 that was studied by Piro et al. in ApJ, 514:L73-L77, 1999.

Numerical Treatment of Stokes Solvent Flow and Solute-Solvent Interfacial Dynamics for Nonpolar Molecules.

PubMed

Sun, Hui; Zhou, Shenggao; Moore, David K; Cheng, Li-Tien; Li, Bo

2016-05-01

We design and implement numerical methods for the incompressible Stokes solvent flow and solute-solvent interface motion for nonpolar molecules in aqueous solvent. The balance of viscous force, surface tension, and van der Waals type dispersive force leads to a traction boundary condition on the solute-solvent interface. To allow the change of solute volume, we design special numerical boundary conditions on the boundary of a computational domain through a consistency condition. We use a finite difference ghost fluid scheme to discretize the Stokes equation with such boundary conditions. The method is tested to have a second-order accuracy. We combine this ghost fluid method with the level-set method to simulate the motion of the solute-solvent interface that is governed by the solvent fluid velocity. Numerical examples show that our method can predict accurately the blow up time for a test example of curvature flow and reproduce the polymodal (e.g., dry and wet) states of hydration of some simple model molecular systems.

Numerical Treatment of Stokes Solvent Flow and Solute-Solvent Interfacial Dynamics for Nonpolar Molecules

PubMed Central

Sun, Hui; Zhou, Shenggao; Moore, David K.; Cheng, Li-Tien; Li, Bo

2015-01-01

We design and implement numerical methods for the incompressible Stokes solvent flow and solute-solvent interface motion for nonpolar molecules in aqueous solvent. The balance of viscous force, surface tension, and van der Waals type dispersive force leads to a traction boundary condition on the solute-solvent interface. To allow the change of solute volume, we design special numerical boundary conditions on the boundary of a computational domain through a consistency condition. We use a finite difference ghost fluid scheme to discretize the Stokes equation with such boundary conditions. The method is tested to have a second-order accuracy. We combine this ghost fluid method with the level-set method to simulate the motion of the solute-solvent interface that is governed by the solvent fluid velocity. Numerical examples show that our method can predict accurately the blow up time for a test example of curvature flow and reproduce the polymodal (e.g., dry and wet) states of hydration of some simple model molecular systems. PMID:27365866

Design and experimental study on Fresnel lens of the combination of equal-width and equal-height of grooves

NASA Astrophysics Data System (ADS)

Guo, Limin; Liu, Youqiang; Huang, Rui; Wang, Zhiyong

2017-06-01

High concentrating PV systems rely on large Fresnel lens that must be precisely oriented in the direction of the Sun to maintain high concentration ratio. We propose a new Fresnel lens design method combining equal-width and equal-height of grooves in this paper based on the principle of focused spot maximum energy. In the ring band near the center of Fresnel lens, the design with equal-width grooves is applied, and when the given condition is reached, the design with equal-height grooves is introduced near the edges of the Fresnel lens, which ensures all the lens grooves are planar. In this paper, we establish a Fresnel lens design example model by Solidworks, and simulate it with the software ZEMAX. An experimental test platform is built to test, and the simulation correctness is proved by experiments. Experimental result shows the concentrating efficiency of this example is 69.3%, slightly lower than the simulation result 75.1%.

Solving Fractional Programming Problems based on Swarm Intelligence

NASA Astrophysics Data System (ADS)

Raouf, Osama Abdel; Hezam, Ibrahim M.

2014-04-01

This paper presents a new approach to solve Fractional Programming Problems (FPPs) based on two different Swarm Intelligence (SI) algorithms. The two algorithms are: Particle Swarm Optimization, and Firefly Algorithm. The two algorithms are tested using several FPP benchmark examples and two selected industrial applications. The test aims to prove the capability of the SI algorithms to solve any type of FPPs. The solution results employing the SI algorithms are compared with a number of exact and metaheuristic solution methods used for handling FPPs. Swarm Intelligence can be denoted as an effective technique for solving linear or nonlinear, non-differentiable fractional objective functions. Problems with an optimal solution at a finite point and an unbounded constraint set, can be solved using the proposed approach. Numerical examples are given to show the feasibility, effectiveness, and robustness of the proposed algorithm. The results obtained using the two SI algorithms revealed the superiority of the proposed technique among others in computational time. A better accuracy was remarkably observed in the solution results of the industrial application problems.

Bioconductor Workflow for Microbiome Data Analysis: from raw reads to community analyses

PubMed Central

Callahan, Ben J.; Sankaran, Kris; Fukuyama, Julia A.; McMurdie, Paul J.; Holmes, Susan P.

2016-01-01

High-throughput sequencing of PCR-amplified taxonomic markers (like the 16S rRNA gene) has enabled a new level of analysis of complex bacterial communities known as microbiomes. Many tools exist to quantify and compare abundance levels or OTU composition of communities in different conditions. The sequencing reads have to be denoised and assigned to the closest taxa from a reference database. Common approaches use a notion of 97% similarity and normalize the data by subsampling to equalize library sizes. In this paper, we show that statistical models allow more accurate abundance estimates. By providing a complete workflow in R, we enable the user to do sophisticated downstream statistical analyses, whether parametric or nonparametric. We provide examples of using the R packages dada2, phyloseq, DESeq2, ggplot2 and vegan to filter, visualize and test microbiome data. We also provide examples of supervised analyses using random forests and nonparametric testing using community networks and the ggnetwork package. PMID:27508062

Building a virtual simulation platform for quasistatic breast ultrasound elastography using open source software: A preliminary investigation

PubMed Central

Wang, Yu; Helminen, Emily; Jiang, Jingfeng

2015-01-01

Purpose: Quasistatic ultrasound elastography (QUE) is being used to augment in vivo characterization of breast lesions. Results from early clinical trials indicated that there was a lack of confidence in image interpretation. Such confidence can only be gained through rigorous imaging tests using complex, heterogeneous but known media. The objective of this study is to build a virtual breast QUE simulation platform in the public domain that can be used not only for innovative QUE research but also for rigorous imaging tests. Methods: The main thrust of this work is to streamline biomedical ultrasound simulations by leveraging existing open source software packages including Field II (ultrasound simulator), VTK (geometrical visualization and processing), FEBio [finite element (FE) analysis], and Tetgen (mesh generator). However, integration of these open source packages is nontrivial and requires interdisciplinary knowledge. In the first step, a virtual breast model containing complex anatomical geometries was created through a novel combination of image-based landmark structures and randomly distributed (small) structures. Image-based landmark structures were based on data from the NIH Visible Human Project. Subsequently, an unstructured FE-mesh was created by Tetgen. In the second step, randomly positioned point scatterers were placed within the meshed breast model through an octree-based algorithm to make a virtual breast ultrasound phantom. In the third step, an ultrasound simulator (Field II) was used to interrogate the virtual breast phantom to obtain simulated ultrasound echo data. Of note, tissue deformation generated using a FE-simulator (FEBio) was the basis of deforming the original virtual breast phantom in order to obtain the postdeformation breast phantom for subsequent ultrasound simulations. Using the procedures described above, a full cycle of QUE simulations involving complex and highly heterogeneous virtual breast phantoms can be accomplished for the first time. Results: Representative examples were used to demonstrate capabilities of this virtual simulation platform. In the first set of three ultrasound simulation examples, three heterogeneous volumes of interest were selected from a virtual breast ultrasound phantom to perform sophisticated ultrasound simulations. These resultant B-mode images realistically represented the underlying complex but known media. In the second set of three QUE examples, advanced applications in QUE were simulated. The first QUE example was to show breast tumors with complex shapes and/or compositions. The resultant strain images showed complex patterns that were normally seen in freehand clinical ultrasound data. The second and third QUE examples demonstrated (deformation-dependent) nonlinear strain imaging and time-dependent strain imaging, respectively. Conclusions: The proposed virtual QUE platform was implemented and successfully tested in this study. Through show-case examples, the proposed work has demonstrated its capabilities of creating sophisticated QUE data in a way that cannot be done through the manufacture of physical tissue-mimicking phantoms and other software. This open software architecture will soon be made available in the public domain and can be readily adapted to meet specific needs of different research groups to drive innovations in QUE. PMID:26328994

STUDIES ON THE ANOMALOUS VISCOSITY AND FLOW-BIREFRINGENCE OF PROTEIN SOLUTIONS

PubMed Central

Lawrence, A. S. C.; Miall, Margaret; Needham, Joseph; Shen, Shih-Chang

1944-01-01

1. An extensive investigation has been made of protein particle shape using the methods of flow-birefringence and anomalous viscosity measurement in the coaxial cell. 2. As a result of investigations on a number of proteins, it is concluded that they may be divided into four groups. Group A consists of those which show flow-anomaly both in the bulk phase and in the surface film. These also show flow-birefringence in the bulk phase. Examples: tobacco mosaic disease virus nucleoprotein; myosin. Though corpuscular proteins, they have elongated particles before denaturation. Group B consists of those which show flow-anomaly only (in the first instance) in the surface film, and no flow-birefringence in the bulk phase. They are probably close to spherical in shape in solution, but form elongated particles as they denature in the surface film. After this process has been completed, they may show flow-anomaly also in the bulk phase. Some proteins show flow-anomaly in the surface film immediately it forms, others only show it after a certain time has elapsed for the building up of the film. We designate the former as group B1 and the latter as group B2. Group B1, immediate surface film flow-anomaly. Examples: serum euglobulin, amphibian embryo euglobulin b. Group B2, slowly appearing surface film flow-anomaly. After the film has once been fully formed and then dispersed by shaking, the solution may have the properties of that of a protein in group B1; i.e., anomalous flow in the film may occur immediately on testing in the viscosimeter. Examples: avian ovalbumin, amphibian embryo pseudoglobulin. Group C consists of those proteins which show flow-anomaly neither in the bulk phase nor in the surface film, under the conditions used by us. They are probably close to spherical in shape. Examples: insulin, methaemoglobin, amphibian embryo euglobulin c, mucoproteins. 3. The theoretical significance of protein fibre molecules, whether native or formed by denaturation in the living cell, is discussed, especially in relation to experimental morphology and cytology. PMID:19873385

Introducing 3D U-statistic method for separating anomaly from background in exploration geochemical data with associated software development

NASA Astrophysics Data System (ADS)

Ghannadpour, Seyyed Saeed; Hezarkhani, Ardeshir

2016-03-01

The U-statistic method is one of the most important structural methods to separate the anomaly from the background. It considers the location of samples and carries out the statistical analysis of the data without judging from a geochemical point of view and tries to separate subpopulations and determine anomalous areas. In the present study, to use U-statistic method in three-dimensional (3D) condition, U-statistic is applied on the grade of two ideal test examples, by considering sample Z values (elevation). So far, this is the first time that this method has been applied on a 3D condition. To evaluate the performance of 3D U-statistic method and in order to compare U-statistic with one non-structural method, the method of threshold assessment based on median and standard deviation (MSD method) is applied on the two example tests. Results show that the samples indicated by U-statistic method as anomalous are more regular and involve less dispersion than those indicated by the MSD method. So that, according to the location of anomalous samples, denser areas of them can be determined as promising zones. Moreover, results show that at a threshold of U = 0, the total error of misclassification for U-statistic method is much smaller than the total error of criteria of bar {x}+n× s. Finally, 3D model of two test examples for separating anomaly from background using 3D U-statistic method is provided. The source code for a software program, which was developed in the MATLAB programming language in order to perform the calculations of the 3D U-spatial statistic method, is additionally provided. This software is compatible with all the geochemical varieties and can be used in similar exploration projects.

Liquid Rocket Engine Testing - Historical Lecture: Simulated Altitude Testing at AEDC

NASA Technical Reports Server (NTRS)

Dougherty, N. S.

2010-01-01

The span of history covered is from 1958 to the present. The outline of this lecture draws from historical examples of liquid propulsion testing done at AEDC primarily for NASA's Marshall Space Flight Center (NASA/MSFC) in the Saturn/Apollo Program and for USAF Space and Missile Systems dual-use customers. NASA has made dual use of Air Force launch vehicles, Test Ranges and Tracking Systems, and liquid rocket altitude test chambers / facilities. Examples are drawn from the Apollo/ Saturn vehicles and the testing of their liquid propulsion systems. Other examples are given to extend to the family of the current ELVs and Evolved ELVs (EELVs), in this case, primarily to their Upper Stages. The outline begins with tests of the XLR 99 Engine for the X-15 aircraft, tests for vehicle / engine induced environments during flight in the atmosphere and in Space, and vehicle staging at high altitude. The discussion is from the author's perspective and background in developmental testing.

The reciprocal iso-inhibition volume concept: A procedure for the evaluation in effect-directed analysis with thin-layer chromatography - using the thin-layer chromatography-luminescent bacteria assay as an example.

PubMed

Schulz, Wolfgang; Weiss, Stefan C; Weber, Walter H; Winzenbacher, Rudi

2017-10-13

In effect-directed analysis (EDA) with high-performance thin-layer chromatography (HPTLC), the effect is often detected using images. Thus, an approach to create inhibition chromatograms from these images was developed using the example of the HPTLC- bioluminescence inhibition test. A comparison between the cuvette test and the HPTLC test shows that the test on the plate is significantly more sensitive. To describe the strength of the effect, the EC 50 value is determined from the dose-response relationship. However, the inhibiting compounds are generally unknown and thus their concentrations are also unknown. Therefore, instead of the concentration, the known application volumes are used. This enables the calculation of the application volume necessary to achieve 50% inhibition. Since the volume is inversely proportional to the concentration, the reciprocal value of the calculated volume is indicated and is referred to as the reciprocal iso-inhibition volume (RIV). Using this RIV-concept, it is now possible to compare inhibition bands within and between plates. The entire evaluation is described by the means of two samples from a contaminated site using the bioluminescence inhibition. Copyright © 2017 Elsevier B.V. All rights reserved.

Partitioning Tracer Test for Detection, Estimation, and Remediation Performance Assessment of Subsurface Nonaqueous Phase Liquids

NASA Astrophysics Data System (ADS)

Jin, Minquan; Delshad, Mojdeh; Dwarakanath, Varadarajan; McKinney, Daene C.; Pope, Gary A.; Sepehrnoori, Kamy; Tilburg, Charles E.; Jackson, Richard E.

1995-05-01

In this paper we present a partitioning interwell tracer test (PITT) technique for the detection, estimation, and remediation performance assessment of the subsurface contaminated by nonaqueous phase liquids (NAPLs). We demonstrate the effectiveness of this technique by examples of experimental and simulation results. The experimental results are from partitioning tracer experiments in columns packed with Ottawa sand. Both the method of moments and inverse modeling techniques for estimating NAPL saturation in the sand packs are demonstrated. In the simulation examples we use UTCHEM, a comprehensive three-dimensional, chemical flood compositional simulator developed at the University of Texas, to simulate a hypothetical two-dimensional aquifer with properties similar to the Borden site contaminated by tetrachloroethylene (PCE), and we show how partitioning interwell tracer tests can be used to estimate the amount of PCE contaminant before remedial action and as the remediation process proceeds. Tracer tests results from different stages of remediation are compared to determine the quantity of PCE removed and the amount remaining. Both the experimental (small-scale) and simulation (large-scale) results demonstrate that PITT can be used as an innovative and effective technique to detect and estimate the amount of residual NAPL and for remediation performance assessment in subsurface formations.

Partitioning tracer test for detection, estimation, and remediation performance assessment of subsurface nonaqueous phase liquids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, M.; Delshad, M.; Dwarakanath, V.

1995-05-01

In this paper we present a partitioning interwell tracer test (PITT) technique for the detection, estimation, and remediation performance assessment of the subsurface contaminated by nonaqueous phase liquids (NAPLs). We demonstrate the effectiveness of this technique by examples of experimental and simulation results. The experimental results are from partitioning tracer experiments in columns packed with Ottawa sand. Both the method of moments and inverse modeling techniques for estimating NAPL saturation in the sand packs are demonstrated. In the simulation examples we use UTCHEM, a comprehensive three-dimensional, chemical flood compositional simulator developed at the University of Texas, to simulate a hypotheticalmore » two-dimensional aquifer with properties similar to the Borden site contaminated by tetrachloroethylene (PCE), and we show how partitioning interwell tracer tests can be used to estimate the amount of PCE contaminant before remedial action and as the remediation process proceeds. Tracer test results from different stages of remediation are compared to determine the quantity of PCE removed and the amount remaining. Both the experimental (small-scale) and simulation (large-scale) results demonstrate that PITT can be used as an innovative and effective technique to detect and estimate the amount of residual NAPL and for remediation performance assessment in subsurface formations. 43 refs., 10 figs., 1 tab.« less

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

40 CFR 80.141 - Interim detergent gasoline program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... considered acceptable for demonstration of IVD control performance. Examples of acceptable test procedures... carburetor deposits. Examples of acceptable test procedures for demonstration of carburetor deposit control... ultimate consumer; (ii) All additized post-refinery component (PRC); and (iii) All detergent additives sold...

Utility of an appropriate reporter assay: Heliotrine interferes with GAL4/upstream activation sequence-driven reporter gene systems.

PubMed

Luckert, Claudia; Hessel, Stefanie; Lampen, Alfonso; Braeuning, Albert

2015-10-15

Reporter gene assays are widely used for the assessment of transcription factor activation following xenobiotic exposure of cells. A critical issue with such assays is the possibility of interference of test compounds with the test system, for example, by direct inhibition of the reporter enzyme. Here we show that the pyrrolizidine alkaloid heliotrine interferes with reporter signals derived from GAL4-based nuclear receptor transactivation assays by a mechanism independent of luciferase enzyme inhibition. These data highlight the necessity to conduct proper control experiments in order to avoid perturbation of reporter assays by test chemicals. Copyright © 2015 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roos, E.; Maier, V.; Nagel, G.

The break preclusion concept is based on {open_quotes}KTA rules{close_quotes}, {open_quotes}RSK guidelines{close_quotes} and {open_quotes}Rahmenspeziflkation Basissicherheit{close_quotes}. These fundamental rules containing for example requirements on material, design, calculation, manufacturing and testing procedures are explained and the technical realisation is shown by means of examples. The proof of the quality of these piping systems can be executed by means of fracture mechanics calculations by showing that in every case the leakage monitoring system already detect cracks which are clearly smaller than the critical crack. Thus the leak before break behavior and the break preclusion concept is implicitly affirmed. In order to further diminish conservativitiesmore » in the fracture mechanics procedures, specific research projects are executed which are explained in this contribution.« less

Exact results for quench dynamics and defect production in a two-dimensional model.

PubMed

Sengupta, K; Sen, Diptiman; Mondal, Shreyoshi

2008-02-22

We show that for a d-dimensional model in which a quench with a rate tau(-1) takes the system across a (d-m)-dimensional critical surface, the defect density scales as n approximately 1/tau(mnu/(znu+1)), where nu and z are the correlation length and dynamical critical exponents characterizing the critical surface. We explicitly demonstrate that the Kitaev model provides an example of such a scaling with d = 2 and m = nu = z = 1. We also provide the first example of an exact calculation of some multispin correlation functions for a two-dimensional model that can be used to determine the correlation between the defects. We suggest possible experiments to test our theory.

Products of composite operators in the exact renormalization group formalism

NASA Astrophysics Data System (ADS)

Pagani, C.; Sonoda, H.

2018-02-01

We discuss a general method of constructing the products of composite operators using the exact renormalization group formalism. Considering mainly the Wilson action at a generic fixed point of the renormalization group, we give an argument for the validity of short-distance expansions of operator products. We show how to compute the expansion coefficients by solving differential equations, and test our method with some simple examples.

Torsional Shear Device for Testing the Dynamic Properties of Recycled Material

NASA Astrophysics Data System (ADS)

Gabryś, Katarzyna; Sas, Wojciech; Soból, Emil; Głuchowski, Andrzej

2016-12-01

From the viewpoint of environmental preservation and effective utilization of resources, it is beneficial and necessary to reuse wastes, for example, concrete, as the recycled aggregates for new materials. In this work, the dynamic behavior of such aggregates under low frequency torsional loading is studied. Results show that the properties of such artificial soils match with those reported in the literature for specific natural soils.

Overcoming pain thresholds with multilevel models-an example using quantitative sensory testing (QST) data.

PubMed

Hirschfeld, Gerrit; Blankenburg, Markus R; Süß, Moritz; Zernikow, Boris

2015-01-01

The assessment of somatosensory function is a cornerstone of research and clinical practice in neurology. Recent initiatives have developed novel protocols for quantitative sensory testing (QST). Application of these methods led to intriguing findings, such as the presence lower pain-thresholds in healthy children compared to healthy adolescents. In this article, we (re-) introduce the basic concepts of signal detection theory (SDT) as a method to investigate such differences in somatosensory function in detail. SDT describes participants' responses according to two parameters, sensitivity and response-bias. Sensitivity refers to individuals' ability to discriminate between painful and non-painful stimulations. Response-bias refers to individuals' criterion for giving a "painful" response. We describe how multilevel models can be used to estimate these parameters and to overcome central critiques of these methods. To provide an example we apply these methods to data from the mechanical pain sensitivity test of the QST protocol. The results show that adolescents are more sensitive to mechanical pain and contradict the idea that younger children simply use more lenient criteria to report pain. Overall, we hope that the wider use of multilevel modeling to describe somatosensory functioning may advance neurology research and practice.

Encouraging Example Generation: A Teaching Experiment in First-Semester Calculus

ERIC Educational Resources Information Center

Wagner, Elaine Rumsey; Orme, Susan Marla; Turner, Heidi Jean; Yopp, David

2017-01-01

Mathematicians use example generation to test and verify mathematical ideas; however, the processes through which undergraduates learn to productively generate examples are not well understood. We engaged calculus students in a teaching experiment designed to develop skills in productively generating examples to learn novel concepts. This article…

Population Fisher information matrix and optimal design of discrete data responses in population pharmacodynamic experiments.

PubMed

Ogungbenro, Kayode; Aarons, Leon

2011-08-01

In the recent years, interest in the application of experimental design theory to population pharmacokinetic (PK) and pharmacodynamic (PD) experiments has increased. The aim is to improve the efficiency and the precision with which parameters are estimated during data analysis and sometimes to increase the power and reduce the sample size required for hypothesis testing. The population Fisher information matrix (PFIM) has been described for uniresponse and multiresponse population PK experiments for design evaluation and optimisation. Despite these developments and availability of tools for optimal design of population PK and PD experiments much of the effort has been focused on repeated continuous variable measurements with less work being done on repeated discrete type measurements. Discrete data arise mainly in PDs e.g. ordinal, nominal, dichotomous or count measurements. This paper implements expressions for the PFIM for repeated ordinal, dichotomous and count measurements based on analysis by a mixed-effects modelling technique. Three simulation studies were used to investigate the performance of the expressions. Example 1 is based on repeated dichotomous measurements, Example 2 is based on repeated count measurements and Example 3 is based on repeated ordinal measurements. Data simulated in MATLAB were analysed using NONMEM (Laplace method) and the glmmML package in R (Laplace and adaptive Gauss-Hermite quadrature methods). The results obtained for Examples 1 and 2 showed good agreement between the relative standard errors obtained using the PFIM and simulations. The results obtained for Example 3 showed the importance of sampling at the most informative time points. Implementation of these expressions will provide the opportunity for efficient design of population PD experiments that involve discrete type data through design evaluation and optimisation.

Impetus of composite mechanics on test methods for fiber composites

NASA Technical Reports Server (NTRS)

Chamis, C. C.

1978-01-01

The impetus of composite mechanics on composite test methods and/or on interpreting test results is described by using examples from composite micromechanics, composite macromechanics and laminate theory. The specific examples included contributions such as criteria for selecting resin matrices for improved composite strength, the 10 deg off-axis tensile test, criteria for configuring hybrids and superhybrids for improved impact resistance and the reduced bending rigidities concept for buckling and vibration analyses.

[Clinical research IV. Relevancy of the statistical test chosen].

PubMed

Talavera, Juan O; Rivas-Ruiz, Rodolfo

2011-01-01

When we look at the difference between two therapies or the association of a risk factor or prognostic indicator with its outcome, we need to evaluate the accuracy of the result. This assessment is based on a judgment that uses information about the study design and statistical management of the information. This paper specifically mentions the relevance of the statistical test selected. Statistical tests are chosen mainly from two characteristics: the objective of the study and type of variables. The objective can be divided into three test groups: a) those in which you want to show differences between groups or inside a group before and after a maneuver, b) those that seek to show the relationship (correlation) between variables, and c) those that aim to predict an outcome. The types of variables are divided in two: quantitative (continuous and discontinuous) and qualitative (ordinal and dichotomous). For example, if we seek to demonstrate differences in age (quantitative variable) among patients with systemic lupus erythematosus (SLE) with and without neurological disease (two groups), the appropriate test is the "Student t test for independent samples." But if the comparison is about the frequency of females (binomial variable), then the appropriate statistical test is the χ(2).

Empirical likelihood-based confidence intervals for the sensitivity of a continuous-scale diagnostic test at a fixed level of specificity.

PubMed

Gengsheng Qin; Davis, Angela E; Jing, Bing-Yi

2011-06-01

For a continuous-scale diagnostic test, it is often of interest to find the range of the sensitivity of the test at the cut-off that yields a desired specificity. In this article, we first define a profile empirical likelihood ratio for the sensitivity of a continuous-scale diagnostic test and show that its limiting distribution is a scaled chi-square distribution. We then propose two new empirical likelihood-based confidence intervals for the sensitivity of the test at a fixed level of specificity by using the scaled chi-square distribution. Simulation studies are conducted to compare the finite sample performance of the newly proposed intervals with the existing intervals for the sensitivity in terms of coverage probability. A real example is used to illustrate the application of the recommended methods.

The efficiency of multimedia learning into old age.

PubMed

Van Gerven, Pascal W M; Paas, Fred; Van Merriënboer, Jeroen J G; Hendriks, Maaike; Schmidt, Henk G

2003-12-01

On the basis of a multimodal model of working memory, cognitive load theory predicts that a multimedia-based instructional format leads to a better acquisition of complex subject matter than a purely visual instructional format. This study investigated the extent to which age and instructional format had an impact on training efficiency among both young and old adults. It was hypothesised that studying worked examples that are presented as a narrated animation (multimedia condition) is a more efficient means of complex skill training than studying visually presented worked examples (unimodal condition) and solving conventional problems. Furthermore, it was hypothesised that multimedia-based worked examples are especially helpful for elderly learners, who have to deal with a general decline of working-memory resources, because they address both mode-specific working-memory stores. The sample consisted of 60 young (mean age = 15.98 years) and 60 old adults (mean age = 64.48 years). Participants of both age groups were trained in either a conventional, a unimodal, or a multimedia condition. Subsequently, they had to solve a series of test problems. Dependent variables were perceived cognitive load during the training, performance on the test, and efficiency in terms of the ratio between these two variables. Results showed that for both age groups multimedia-based worked examples were more efficient than the other training formats in that less cognitive load led to at least an equal performance level. Although no difference in the beneficial effect of multimedia learning was found between the age groups, multimedia-based instructions seem promising for the elderly.

Smarter Instruments, Smarter Archives: Machine Learning for Tactical Science

NASA Astrophysics Data System (ADS)

Thompson, D. R.; Kiran, R.; Allwood, A.; Altinok, A.; Estlin, T.; Flannery, D.

2014-12-01

There has been a growing interest by Earth and Planetary Sciences in machine learning, visualization and cyberinfrastructure to interpret ever-increasing volumes of instrument data. Such tools are commonly used to analyze archival datasets, but they can also play a valuable real-time role during missions. Here we discuss ways that machine learning can benefit tactical science decisions during Earth and Planetary Exploration. Machine learning's potential begins at the instrument itself. Smart instruments endowed with pattern recognition can immediately recognize science features of interest. This allows robotic explorers to optimize their limited communications bandwidth, triaging science products and prioritizing the most relevant data. Smart instruments can also target their data collection on the fly, using principles of experimental design to reduce redundancy and generally improve sampling efficiency for time-limited operations. Moreover, smart instruments can respond immediately to transient or unexpected phenomena. Examples include detections of cometary plumes, terrestrial floods, or volcanism. We show recent examples of smart instruments from 2014 tests including: aircraft and spacecraft remote sensing instruments that recognize cloud contamination, field tests of a "smart camera" for robotic surface geology, and adaptive data collection by X-Ray fluorescence spectrometers. Machine learning can also assist human operators when tactical decision making is required. Terrestrial scenarios include airborne remote sensing, where the decision to re-fly a transect must be made immediately. Planetary scenarios include deep space encounters or planetary surface exploration, where the number of command cycles is limited and operators make rapid daily decisions about where next to collect measurements. Visualization and modeling can reveal trends, clusters, and outliers in new data. This can help operators recognize instrument artifacts or spot anomalies in real time. We show recent examples from science data pipelines deployed onboard aircraft as well as tactical visualizations for non-image instrument data.

Use of heat as a groundwater tracer in fractured rock hydrology

NASA Astrophysics Data System (ADS)

Bour, Olivier; Le Borgne, Tanguy; Klepikova, Maria V.; Read, Tom; Selker, John S.; Bense, Victor F.; Le Lay, Hugo; Hochreutener, Rebecca; Lavenant, Nicolas

2015-04-01

Crystalline rocks aquifers are often difficult to characterize since flows are mainly localized in few fractures. In particular, the geometry and the connections of the main flow paths are often only partly constrained with classical hydraulic tests. Here, we show through few examples how heat can be used to characterize groundwater flows in fractured rocks at the borehole, inter-borehole and watershed scale. Estimating flows from temperature measurements requires heat advection to be the dominant process of heat transport, but this condition is generally met in fractured rock at least within the few structures where flow is highly channelized. At the borehole scale, groundwater temperature variations with depth can be used to locate permeable fractures and to estimates borehole flows. Measurements can be done with classical multi-parameters probes, but also with recent technologies such as Fiber Optic Distributed Temperature Sensing (FO-DTS) which allows to measure temperature over long distances with an excellent spatial and temporal resolution. In addition, we show how a distributed borehole flowmeter can be achieved using an armored fiber-optic cable and measuring the difference in temperature between a heated and unheated cable that is a function of the fluid velocity. At the inter-borehole scale, temperature changes during cross-borehole hydraulic tests allow to identify the connections and the hydraulic properties of the main flow paths between boreholes. At the aquifer scale, groundwater temperature may be monitored to record temperature changes and estimate groundwater origin. In the example chosen, the main water supply comes from a depth of at least 300 meters through relatively deep groundwater circulation within a major permeable fault zone. The influence of groundwater extraction is clearly identified through groundwater temperature monitoring. These examples illustrate the advantages and limitations of using heat and groundwater temperature measurements for fractured rock hydrology.

Conditions for the compatibility of channels in general probabilistic theory and their connection to steering and Bell nonlocality

NASA Astrophysics Data System (ADS)

Plávala, Martin

2017-11-01

We derive general conditions for the compatibility of channels in general probabilistic theory. We introduce formalism that allows us to easily formulate steering by channels and Bell nonlocality of channels as generalizations of the well-known concepts of steering by measurements and Bell nonlocality of measurements. The generalization does not follow the standard line of thinking stemming from the Einstein-Podolsky-Rosen paradox, but introduces steering and Bell nonlocality as entanglement-assisted incompatibility tests. We show that all of the proposed definitions are, in the special case of measurements, the same as the standard definitions, but not all of the known results for measurements generalize to channels. For example, we show that for quantum channels, steering is not a necessary condition for Bell nonlocality. We further investigate the introduced conditions and concepts in the special case of quantum theory and we provide many examples to demonstrate these concepts and their implications.

Total hydrocarbon content (THC) testing in liquid oxygen (LOX) systems

NASA Astrophysics Data System (ADS)

Meneghelli, B. J.; Obregon, R. E.; Ross, H. R.; Hebert, B. J.; Sass, J. P.; Dirschka, G. E.

2015-12-01

The measured Total Hydrocarbon Content (THC) levels in liquid oxygen (LOX) systems at Stennis Space Center (SSC) have shown wide variations. Examples of these variations include the following: 1) differences between vendor-supplied THC values and those obtained using standard SSC analysis procedures; and 2) increasing THC values over time at an active SSC test stand in both storage and run vessels. A detailed analysis of LOX sampling techniques, analytical instrumentation, and sampling procedures will be presented. Additional data obtained on LOX system operations and LOX delivery trailer THC values during the past 12-24 months will also be discussed. Field test results showing THC levels and the distribution of the THC's in the test stand run tank, modified for THC analysis via dip tubes, will be presented.

Total Hydrocarbon Content (THC) Testing in Liquid Oxygen (LOX)

NASA Technical Reports Server (NTRS)

Meneghelli, B. J.; Obregon, R. E.; Ross, H. R.; Hebert, B. J.; Sass, J. P.; Dirschka, G. E.

2016-01-01

The measured Total Hydrocarbon Content (THC) levels in liquid oxygen (LOX) systems at Stennis Space Center (SSC) have shown wide variations. Examples of these variations include the following: 1) differences between vendor-supplied THC values and those obtained using standard SSC analysis procedures; and 2) increasing THC values over time at an active SSC test stand in both storage and run vessels. A detailed analysis of LOX sampling techniques, analytical instrumentation, and sampling procedures will be presented. Additional data obtained on LOX system operations and LOX delivery trailer THC values during the past 12-24 months will also be discussed. Field test results showing THC levels and the distribution of the THC's in the test stand run tank, modified for THC analysis via dip tubes, will be presented.

How item banks and their application can influence measurement practice in rehabilitation medicine: a PROMIS fatigue item bank example.

PubMed

Lai, Jin-Shei; Cella, David; Choi, Seung; Junghaenel, Doerte U; Christodoulou, Christopher; Gershon, Richard; Stone, Arthur

2011-10-01

To illustrate how measurement practices can be advanced by using as an example the fatigue item bank (FIB) and its applications (short forms and computerized adaptive testing [CAT]) that were developed through the National Institutes of Health Patient Reported Outcomes Measurement Information System (PROMIS) Cooperative Group. Psychometric analysis of data collected by an Internet survey company using item response theory-related techniques. A U.S. general population representative sample collected through the Internet. Respondents used for dimensionality evaluation of the PROMIS FIB (N=603) and item calibrations (N=14,931). Not applicable. Fatigue items (112) developed by the PROMIS fatigue domain working group, 13-item Functional Assessment of Chronic Illness Therapy-Fatigue, and 4-item Medical Outcomes Study 36-Item Short Form Health Survey Vitality scale. The PROMIS FIB version 1, which consists of 95 items, showed acceptable psychometric properties. CAT showed consistently better precision than short forms. However, all 3 short forms showed good precision for most participants in that more than 95% of the sample could be measured precisely with reliability greater than 0.9. Measurement practice can be advanced by using a psychometrically sound measurement tool and its applications. This example shows that CAT and short forms derived from the PROMIS FIB can reliably estimate fatigue reported by the U.S. general population. Evaluation in clinical populations is warranted before the item bank can be used for clinical trials. Copyright © 2011 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

System reliability of randomly vibrating structures: Computational modeling and laboratory testing

NASA Astrophysics Data System (ADS)

Sundar, V. S.; Ammanagi, S.; Manohar, C. S.

2015-09-01

The problem of determination of system reliability of randomly vibrating structures arises in many application areas of engineering. We discuss in this paper approaches based on Monte Carlo simulations and laboratory testing to tackle problems of time variant system reliability estimation. The strategy we adopt is based on the application of Girsanov's transformation to the governing stochastic differential equations which enables estimation of probability of failure with significantly reduced number of samples than what is needed in a direct simulation study. Notably, we show that the ideas from Girsanov's transformation based Monte Carlo simulations can be extended to conduct laboratory testing to assess system reliability of engineering structures with reduced number of samples and hence with reduced testing times. Illustrative examples include computational studies on a 10-degree of freedom nonlinear system model and laboratory/computational investigations on road load response of an automotive system tested on a four-post test rig.

Testing the Model-Observer Similarity Hypothesis with Text-Based Worked Examples

ERIC Educational Resources Information Center

Hoogerheide, Vincent; Loyens, Sofie M. M.; Jadi, Fedora; Vrins, Anna; van Gog, Tamara

2017-01-01

Example-based learning is a very effective and efficient instructional strategy for novices. It can be implemented using text-based worked examples that provide a written demonstration of how to perform a task, or (video) modelling examples in which an instructor (the "model") provides a demonstration. The model-observer similarity (MOS)…

Characterization of Gas Transport Properties of Fractured Rocks By Borehole and Chamber Tests.

NASA Astrophysics Data System (ADS)

Shimo, M.; Shimaya, S.; Maejima, T.

2014-12-01

Gas transport characteristics of fractured rocks is a great concern to variety of engineering applications such as underground storage of LPG, nuclear waste disposal, CCS and gas flooding in the oil field. Besides absolute permeability, relative permeability and capillary pressure as a function of water saturation have direct influences to the results of two phase flow simulation. However, number of the reported gas flow tests for fractured rocks are limited, therefore, the applicability of the conventional two-phase flow functions used for porous media, such as Mualem-van Genuchten model, to prediction of the gas transport in the fractured rock mass are not well understood. The authors conducted the two types of in-situ tests, with different scales, a borehole gas-injection test and a chamber gas-injection test in fractured granitic rock. These tests were conducted in the Cretaceous granitic rocks at the Namikata underground LPG storage cavern construction site in Ehime Prefecture in Japan, preceding to the cavern scale gas-tightness test. A borehole injection test was conducted using vertical and sub-vertical boreholes drilled from the water injection tunnel nearly at the depth of the top of the cavern, EL-150m. A new type downhole gas injection equipment that is capable to create a small 'cavern' within a borehole was developed. After performing a series of preliminary tests to investigate the hydraulic conductivity and gas-tightness, i.e. threshold pressure, gas injection tests were conducted under different gas pressure. Fig.1 shows an example of the test results From a chamber test using a air pressurizing chamber with volume of approximately166m3, the gas-tightness was confirmed within the uncertainty of 22Pa under the storage pressure of 0.7MPa, however, significant air leakage occurred possibly through an open fracture intersecting the chamber just after cavern pressure exceeds the initial hydrostatic pressure at the ceiling level of the chamber. Anomalies were detected in the data of the pore pressure as well as AE monitoring around the chamber. Results from the above two tests were simulated using a multi-phase transport simulator, TOUGH2, developed at Lawrence Berkeley National Laboratory. Fig.2 shows the model and an example of the simulation.

Magnetic Signature: Small Arms Testing of Multiple Examples of Same Model Weapons

DTIC Science & Technology

2009-04-01

inside the wooden building, showing a three-axis fluxgate magnetometer , north-south path lines, and instrumentation system...the FVM-400 Vector Fluxgate Magnetometer by Macintyre Electronics Design Associates, Inc. (MEDA) was used and in other cases two DFM100G2 Digital... Fluxgate Magnetometers made by Billingsley Magnetics were used. The majority of the data obtained was done with the latter. The MEDA has a 1 nT

Observability of discretized partial differential equations

NASA Technical Reports Server (NTRS)

Cohn, Stephen E.; Dee, Dick P.

1988-01-01

It is shown that complete observability of the discrete model used to assimilate data from a linear partial differential equation (PDE) system is necessary and sufficient for asymptotic stability of the data assimilation process. The observability theory for discrete systems is reviewed and applied to obtain simple observability tests for discretized constant-coefficient PDEs. Examples are used to show how numerical dispersion can result in discrete dynamics with multiple eigenvalues, thereby detracting from observability.

Working Charts for the Selection of Aluminum Alloy Propellers of a Standard Form to Operate with Various Aircraft Engines and Bodies

NASA Technical Reports Server (NTRS)

Weick, Fred E

1931-01-01

Working charts are given for the convenient selection of aluminum alloy propellers of a standard form, to operate in connection with six different engine-fuselage combinations. The charts have been prepared from full-scale test data obtained in the 20-foot propeller research tunnel of the National Advisory Committee for Aeronautics. An example is also given showing the use of the charts.

Passive and Active Tagging of Reinforced Composites for in Process and Infield Non-Destructive Evaluation

DTIC Science & Technology

1996-02-01

participating companies: Reichhold Chemicals, Clark-Schwebel, PPG Industries, Interplastic Corp., Owens - Corning , and TPI, Inc .. Tagging Materials Five...cellophane film (# 95080906). The eddy current testing of samples with MnZn ferrite tagging from Owens - Corning showed that the response of the sample...example, consider the specimen obtained from Owens - Corning sample A (MnZn ferrite tagging) shown in the sixth row of Table 3. The naturaI frequency

"We're Keeping on Top of the Students": Making Sense of Test Data with More Informal Data in a Grade-Level Instructional Team

ERIC Educational Resources Information Center

Wardrip, Peter S.; Herman, Phillip

2018-01-01

Internationally, there has been a policy push for using student data for instruction. Yet, research has noted few examples of actually understanding how this data-use practice takes place. This study presents a case of an instructional data team making sense of student data. The study shares data to show how teachers' process for using data to…

Diagnostics for insufficiencies of posterior calculations in Bayesian signal inference.

PubMed

Dorn, Sebastian; Oppermann, Niels; Ensslin, Torsten A

2013-11-01

We present an error-diagnostic validation method for posterior distributions in Bayesian signal inference, an advancement of a previous work. It transfers deviations from the correct posterior into characteristic deviations from a uniform distribution of a quantity constructed for this purpose. We show that this method is able to reveal and discriminate several kinds of numerical and approximation errors, as well as their impact on the posterior distribution. For this we present four typical analytical examples of posteriors with incorrect variance, skewness, position of the maximum, or normalization. We show further how this test can be applied to multidimensional signals.

Using Structured Examples and Prompting Reflective Questions to Correct Misconceptions about Thermodynamic Concepts

ERIC Educational Resources Information Center

Olakanmi, E. O.; Doyoyo, M.

2014-01-01

This paper explores the effectiveness of using "structured examples in concert with prompting reflective questions" to address misconceptions held by mechanical engineering students about thermodynamic principles by employing pre-test and post-test design, a structured questionnaire, lecture room observation, and participants'…

How Well do the Military Services Perform Jointly in Combat? DoD’s Joint Test-and-Evaluation Program Provides Few Credible Answers.

DTIC Science & Technology

1984-02-22

of the test conditions were unrealistic. For example, four better-than-average pilots flew all the test missions in mostly excellent weather, in one...that aircraft pilots need to respond to a request for close air support is likely to influence combat effectiveness. Earl- ier joint testing had made...in the JTF reports. For example, the IIR Maverick report contains the conclusion that, in general, the pilots detected targets easily, but the test

Seismic data acquisition at the FACT site for the CASPAR project.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Kyle R.; Chael, Eric Paul; Hart, Darren M.

Since May 2010, we have been recording continuous seismic data at Sandia's FACT site. The collected signals provide us with a realistic archive for testing algorithms under development for local monitoring of explosive testing. Numerous small explosive tests are routinely conducted around Kirtland AFB by different organizations. Our goal is to identify effective methods for distinguishing these events from normal daily activity on and near the base, such as vehicles, aircraft, and storms. In this report, we describe the recording system, and present some observations of the varying ambient noise conditions at FACT. We present examples of various common, non-explosive,more » sources. Next we show signals from several small explosions, and discuss their characteristic features.« less

The Bootstrap, the Jackknife, and the Randomization Test: A Sampling Taxonomy.

PubMed

Rodgers, J L

1999-10-01

A simple sampling taxonomy is defined that shows the differences between and relationships among the bootstrap, the jackknife, and the randomization test. Each method has as its goal the creation of an empirical sampling distribution that can be used to test statistical hypotheses, estimate standard errors, and/or create confidence intervals. Distinctions between the methods can be made based on the sampling approach (with replacement versus without replacement) and the sample size (replacing the whole original sample versus replacing a subset of the original sample). The taxonomy is useful for teaching the goals and purposes of resampling schemes. An extension of the taxonomy implies other possible resampling approaches that have not previously been considered. Univariate and multivariate examples are presented.

Graphical programming interface: A development environment for MRI methods.

PubMed

Zwart, Nicholas R; Pipe, James G

2015-11-01

To introduce a multiplatform, Python language-based, development environment called graphical programming interface for prototyping MRI techniques. The interface allows developers to interact with their scientific algorithm prototypes visually in an event-driven environment making tasks such as parameterization, algorithm testing, data manipulation, and visualization an integrated part of the work-flow. Algorithm developers extend the built-in functionality through simple code interfaces designed to facilitate rapid implementation. This article shows several examples of algorithms developed in graphical programming interface including the non-Cartesian MR reconstruction algorithms for PROPELLER and spiral as well as spin simulation and trajectory visualization of a FLORET example. The graphical programming interface framework is shown to be a versatile prototyping environment for developing numeric algorithms used in the latest MR techniques. © 2014 Wiley Periodicals, Inc.

Elastic Gauge Fields in Weyl Semimetals

NASA Astrophysics Data System (ADS)

Cortijo, Alberto; Ferreiros, Yago; Landsteiner, Karl; Hernandez Vozmediano, Maria Angeles

We show that, as it happens in graphene, elastic deformations couple to the electronic degrees of freedom as pseudo gauge fields in Weyl semimetals. We derive the form of the elastic gauge fields in a tight-binding model hosting Weyl nodes and see that this vector electron-phonon coupling is chiral, providing an example of axial gauge fields in three dimensions. As an example of the new response functions that arise associated to these elastic gauge fields, we derive a non-zero phonon Hall viscosity for the neutral system at zero temperature. The axial nature of the fields provides a test of the chiral anomaly in high energy with three axial vector couplings. European Union structural funds and the Comunidad de Madrid MAD2D-CM Program (S2013/MIT-3007).

A Brief Critique of the TATES Procedure.

PubMed

Aliev, Fazil; Salvatore, Jessica E; Agrawal, Arpana; Almasy, Laura; Chan, Grace; Edenberg, Howard J; Hesselbrock, Victor; Kuperman, Samuel; Meyers, Jacquelyn; Dick, Danielle M

2018-03-01

The Trait-based test that uses the Extended Simes procedure (TATES) was developed as a method for conducting multivariate GWAS for correlated phenotypes whose underlying genetic architecture is complex. In this paper, we provide a brief methodological critique of the TATES method using simulated examples and a mathematical proof. Our simulated examples using correlated phenotypes show that the Type I error rate is higher than expected, and that more TATES p values fall outside of the confidence interval relative to expectation. Thus the method may result in systematic inflation when used with correlated phenotypes. In a mathematical proof we further demonstrate that the distribution of TATES p values deviates from expectation in a manner indicative of inflation. Our findings indicate the need for caution when using TATES for multivariate GWAS of correlated phenotypes.

The Advantage of Mixing Examples in Inductive Learning: A Comparison of Three Hypotheses

ERIC Educational Resources Information Center

Guzman-Munoz, Francisco Javier

2017-01-01

Mixing examples of different categories (interleaving) has been shown to promote inductive learning as compared with presenting examples of the same category together (massing). In three studies, we tested whether the advantage of interleaving is exclusively due to the mixing of examples from different categories or to the temporal gap introduced…

Making the Hubble Space Telescope servicing mission safe

NASA Technical Reports Server (NTRS)

Bahr, N. J.; Depalo, S. V.

1992-01-01

The implementation of the HST system safety program is detailed. Numerous safety analyses are conducted through various phases of design, test, and fabrication, and results are presented to NASA management for discussion during dedicated safety reviews. Attention is given to the system safety assessment and risk analysis methodologies used, i.e., hazard analysis, fault tree analysis, and failure modes and effects analysis, and to how they are coupled with engineering and test analysis for a 'synergistic picture' of the system. Some preliminary safety analysis results, showing the relationship between hazard identification, control or abatement, and finally control verification, are presented as examples of this safety process.

Increasing use of high-speed digital imagery as a measurement tool on test and evaluation ranges

NASA Astrophysics Data System (ADS)

Haddleton, Graham P.

2001-04-01

In military research and development or testing there are various fast and dangerous events that need to be recorded and analysed. High-speed cameras allow the capture of movement too fast to be recognised by the human eye, and provide data that is essential for the analysis and evaluation of such events. High-speed photography is often the only type of instrumentation that can be used to record the parameters demanded by our customers. I will show examples where this applied cinematography is used not only to provide a visual record of events, but also as an essential measurement tool.

The perceptual trap: Experimental and modelling examples of soil moisture, hydraulic conductivity and response units in complex subsurface settings.

NASA Astrophysics Data System (ADS)

Jackisch, Conrad; Demand, Dominic; Allroggen, Niklas; Loritz, Ralf; Zehe, Erwin

2017-04-01

In order to discuss hypothesis testing in hydrology, the question of the solid foundation of such tests has to be answered. But how certain are we about our measurements of the components of the water balance and the states and dynamics of the complex systems? What implicit assumptions or bias are already embedded in our perception of the processes? How can we find light in the darkness of heterogeneity? We will contribute examples from experimental findings, modelling approaches and landscape analysis to the discussion. Example soil moisture and the soil continuum: The definition of soil moisture as fraction of water in the porous medium assumes locally well-mixed conditions. Moreover, a unique relation of soil water retention presumes instant local thermodynamic equilibrium in the pore water arrangement. We will show findings from soil moisture responses to precipitation events, from irrigation experiments, and from a model study of initial infiltration velocities. The results highlight, that the implicit assumption relating soil moisture state dynamics with actual soil water flow is biased towards the slow end of the actual velocity distribution and rather blind for preferential flow acting in a very small proportion of the pore space. Moreover, we highlight the assumption of a well-defined continuum during the extrapolation of point-scale measurements and why spatially and temporally continuous observation techniques of soil water states are essential for advancing our understanding and development of subsurface process theories. Example hydraulic conductivity: Hydraulic conductivity lies at the heart of hydrological research and modelling. Its values can range across several orders of magnitude at a single site alone. Yet, we often consider it a crisp, effective parameter. We have conducted measurements of soil hydraulic conductivity in the lab and in the field. Moreover, we assessed infiltration capacity and conducted plot-scale irrigation experiments to analyse the apparent vertical soil water velocity for different soils and different measurement techniques. The results give rise to questions about the universality of the Darcy-scale assumptions and a scale-invariant assessment of hydraulic conductivity. Example surface characteristics and subsurface processes: Hydrological models require the identification of some sort of response units based on available data. For this purpose many approaches relating surface properties to hydrological function have been developed. To test the coherence of surface characteristics and subsurface processes we contrasted in situ measurements, pedo-physical analyses of soil samples, an examination of the flow regimes and an investigation of GIS and remote sensing data. Our results show that landscape features and process characteristics do not necessarily align. Landscape classes and pedo-physical property means are not sufficient to define hydrologically functional units.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chandra, Mani; Gammie, Charles F.; Foucart, Francois, E-mail: manic@illinois.edu, E-mail: gammie@illinois.edu, E-mail: fvfoucart@lbl.gov

Hot, diffuse, relativistic plasmas such as sub-Eddington black-hole accretion flows are expected to be collisionless, yet are commonly modeled as a fluid using ideal general relativistic magnetohydrodynamics (GRMHD). Dissipative effects such as heat conduction and viscosity can be important in a collisionless plasma and will potentially alter the dynamics and radiative properties of the flow from that in ideal fluid models; we refer to models that include these processes as Extended GRMHD. Here we describe a new conservative code, grim, that enables all of the above and additional physics to be efficiently incorporated. grim combines time evolution and primitive variablemore » inversion needed for conservative schemes into a single step using an algorithm that only requires the residuals of the governing equations as inputs. This algorithm enables the code to be physics agnostic as well as flexibility regarding time-stepping schemes. grim runs on CPUs, as well as on GPUs, using the same code. We formulate a performance model and use it to show that our implementation runs optimally on both architectures. grim correctly captures classical GRMHD test problems as well as a new suite of linear and nonlinear test problems with anisotropic conduction and viscosity in special and general relativity. As tests and example applications, we resolve the shock substructure due to the presence of dissipation, and report on relativistic versions of the magneto-thermal instability and heat flux driven buoyancy instability, which arise due to anisotropic heat conduction, and of the firehose instability, which occurs due to anisotropic pressure (i.e., viscosity). Finally, we show an example integration of an accretion flow around a Kerr black hole, using Extended GRMHD.« less

The Heritage of Earth Science Applications in Policy, Business, and Management of Natural Resources

NASA Astrophysics Data System (ADS)

Macauley, M.

2012-12-01

From the first hand-held cameras on the Gemini space missions to present day satellite instruments, Earth observations have enhanced the management of natural resources including water, land, and air. Applications include the development of new methodology (for example, developing and testing algorithms or demonstrating how data can be used) and the direct use of data in decisionmaking and policy implementation. Using well-defined bibliographic search indices to systematically survey a broad social science literature, this project enables identification of a host of well-documented, practical and direct applications of Earth science data in resource management. This literature has not previously been well surveyed, aggregated, or analyzed for the heritage of lessons learned in practical application of Earth science data. In the absence of such a survey, the usefulness of Earth science data is underestimated and the factors that make people want to use -- and able to use -- the data are poorly understood. The project extends and updates previous analysis of social science applications of Landsat data to show their contemporary, direct use in new policy, business, and management activities and decisionmaking. The previous surveys (for example, Blumberg and Jacobson 1997; National Research Council 1998) find that the earliest attempts to use data are almost exclusively testing of methodology rather than direct use in resource management. Examples of methodology prototyping include Green et al. (1997) who demonstrate use of remote sensing to detect and monitor changes in land cover and use, Cowen et al. (1995) who demonstrate design and integration of GIS for environmental applications, Hutchinson (1991) who shows uses of data for famine early warning, and Brondizio et al. (1996) who show the link of thematic mapper data with botanical data. Blumberg and Jacobson (in Acevedo et al. 1996) show use of data in a study of urban development in the San Francisco Bay and the Baltimore-Washington metropolitan regions. The earliest direct application of Earth science information to actual decisionmaking began with the use of Landsat data in large-scale government demonstration programs and later, in smaller state and local agency projects. Many of these applications served as experiments to show how to use the data and to test their limitations. These activities served as precursors to more recent applications. Among the newest applications are the use of data to provide essential information to underpin monetary estimates of ecosystem services and the development of "credit" programs for these services. Another example is participatory (citizen science) resource management. This project also identifies the heritage of adoption factors - that is, determinants of the decision to use Earth science data. These factors include previous experience with Earth science data, reliable and transparent validation and verification techniques for new data, the availability and thoroughness of metadata, the ease of access and use of the data products, and technological innovation in computing and software (factors largely outside of the Earth science enterprise but influential in ease of direct use of Earth science data).

Environmental testing for new SOFIA flight hardware

NASA Astrophysics Data System (ADS)

Lachenmann, Michael; Wolf, Jürgen; Strecker, Rainer; Weckenmann, Benedikt; Trimpe, Fritz; Hall, Helen J.

2014-07-01

New flight hardware for the Stratospheric Observatory for Infrared Astronomy (SOFIA) has to be tested to prove its safety and functionality and to measure its performance under flight conditions. Although it is not expected to experience critical issues inside the pressurized cabin with close-to-normal conditions, all equipment has to be tested for safety margins in case of a decompression event and/or for unusual high temperatures, e.g. inside an electronic unit caused by a malfunction as well as unusual high ambient temperatures inside the cabin, when the aircraft is parked in a desert. For equipment mounted on the cavity side of the telescope, stratospheric conditions apply, i.e., temperatures from -40 °C to -60°C and an air pressure of about 0.1 bar. Besides safety aspects as not to endanger personnel or equipment, new hardware inside the cavity has to function and to perform to specifications under such conditions. To perform these tests, an environmental test laboratory was set up at the SOFIA Science Center at the NASA Ames Research Center, including a thermal vacuum chamber, temperature measurement equipment, and a control and data logging workstation. This paper gives an overview of the test and measurement equipment, shows results from the commissioning and characterization of the thermal vacuum chamber, and presents examples of the component tests that were performed so far. To test the focus position stability of optics when cooling them to stratospheric temperatures, an auto-collimation device has been developed. We will present its design and results from measurements on commercial off-the-shelf optics as candidates for the new Wide Field Imager for SOFIA as an example.

Atom interferometry in space: Thermal management and magnetic shielding

NASA Astrophysics Data System (ADS)

Milke, Alexander; Kubelka-Lange, André; Gürlebeck, Norman; Rievers, Benny; Herrmann, Sven; Schuldt, Thilo; Braxmaier, Claus

2014-08-01

Atom interferometry is an exciting tool to probe fundamental physics. It is considered especially apt to test the universality of free fall by using two different sorts of atoms. The increasing sensitivity required for this kind of experiment sets severe requirements on its environments, instrument control, and systematic effects. This can partially be mitigated by going to space as was proposed, for example, in the Spacetime Explorer and Quantum Equivalence Principle Space Test (STE-QUEST) mission. However, the requirements on the instrument are still very challenging. For example, the specifications of the STE-QUEST mission imply that the Feshbach coils of the atom interferometer are allowed to change their radius only by about 260 nm or 2.6 × 10-4 % due to thermal expansion although they consume an average power of 22 W. Also Earth's magnetic field has to be suppressed by a factor of 105. We show in this article that with the right design such thermal and magnetic requirements can indeed be met and that these are not an impediment for the exciting physics possible with atom interferometers in space.

Fatigue testing and damage development in continuous fiber reinforced metal matrix composites

NASA Technical Reports Server (NTRS)

Johnson, W. S.

1988-01-01

A general overview of the fatigue behavior of metal matrix composites (MMC) is presented. The first objective is to present experimental procedures and techniques for conducting a meaningful fatigue test to detect and quantify fatigue damage in MMC. These techniques include interpretation of stress-strain responses, acid etching of the matrix, edge replicas of the specimen under load, radiography, and micrographs of the failure surfaces. In addition, the paper will show how stiffness loss in continuous fiber reinforced metal matrix composites can be a useful parameter for detecting fatigue damage initiation and accumulation. Second, numerous examples of how fatigue damage can initiate and grow in various MMC are given. Depending on the relative fatigue behavior of the fiber and matrix, and the interface properties, the failure modes of MMC can be grouped into four categories: (1) matrix dominated, (2) fiber dominated, (3) self-similar damage growth, and (4) fiber/matrix interfacial failures. These four types of damage will be discussed and illustrated by examples with the emphasis on the fatigue of unnotched laminates.

Fatigue testing and damage development in continuous fiber reinforced metal matrix composites

NASA Technical Reports Server (NTRS)

Johnson, W. S.

1989-01-01

A general overview of the fatigue behavior of metal matrix composites (MMC) is presented. The first objective is to present experimental procedures and techniques for conducting a meaningful fatigue test to detect and quantify fatigue damage in MMC. These techniques include interpretation of stress-strain responses, acid etching of the matrix, edge replicas of the specimen under load, radiography, and micrographs of the failure surfaces. In addition, the paper will show how stiffness loss in continuous fiber reinforced metal matrix composites can be a useful parameter for detecting fatigue damage initiation and accumulation. Second, numerous examples of how fatigue damage can initiate and grow in various MMC are given. Depending on the relative fatigue behavior of the fiber and matrix, and the interface properties, the failure modes of MMC can be grouped into four categories: (1) matrix dominated, (2) fiber dominated, (3) self-similar damage growth, and (4) fiber/matrix interfacial failures. These four types of damage will be discussed and illustrated by examples with the emphasis on the fatigue of unnotched laminates.

Preparation of 24 ternary thin film materials libraries on a single substrate in one experiment for irreversible high-throughput studies.

PubMed

Buenconsejo, Pio John S; Siegel, Alexander; Savan, Alan; Thienhaus, Sigurd; Ludwig, Alfred

2012-01-09

For different areas of combinatorial materials science, it is desirable to have multiple materials libraries: especially for irreversible high-throughput studies, like, for example, corrosion resistance testing in different media or annealing of complete materials libraries at different temperatures. Therefore a new combinatorial sputter-deposition process was developed which yields 24 materials libraries in one experiment on a single substrate. It is discussed with the example of 24 Ti-Ni-Ag materials libraries. They are divided based on the composition coverage and orientation of composition gradient into two sets of 12 nearly identical materials libraries. Each materials library covers at least 30-40% of the complete ternary composition range. An acid etch test in buffered-HF solution was performed, illustrating the feasibility of our approach for destructive materials characterization. The results revealed that within the composition range of Ni < 30 at.%, the films were severely etched. The composition range which shows reversible martensitic transformations was confirmed to be outside this region. The high output of the present method makes it attractive for combinatorial studies requiring multiple materials libraries.

Empirical versus Random Item Selection in the Design of Intelligence Test Short Forms--The WISC-R Example.

ERIC Educational Resources Information Center

Goh, David S.

1979-01-01

The advantages of using psychometric thoery to design short forms of intelligence tests are demonstrated by comparing such usage to a systematic random procedure that has previously been used. The Wechsler Intelligence Scale for Children Revised (WISC-R) Short Form is presented as an example. (JKS)

Methodology for testing infrared focal plane arrays in simulated nuclear radiation environments

NASA Astrophysics Data System (ADS)

Divita, E. L.; Mills, R. E.; Koch, T. L.; Gordon, M. J.; Wilcox, R. A.; Williams, R. E.

1992-07-01

This paper summarizes test methodology for focal plane array (FPA) testing that can be used for benign (clear) and radiation environments, and describes the use of custom dewars and integrated test equipment in an example environment. The test methodology, consistent with American Society for Testing Materials (ASTM) standards, is presented for the total accumulated gamma dose, transient dose rate, gamma flux, and neutron fluence environments. The merits and limitations of using Cobalt 60 for gamma environment simulations and of using various fast-neutron reactors and neutron sources for neutron simulations are presented. Test result examples are presented to demonstrate test data acquisition and FPA parameter performance under different measurement conditions and environmental simulations.

Fostering clinical reasoning in physiotherapy: comparing the effects of concept map study and concept map completion after example study in novice and advanced learners.

PubMed

Montpetit-Tourangeau, Katherine; Dyer, Joseph-Omer; Hudon, Anne; Windsor, Monica; Charlin, Bernard; Mamede, Sílvia; van Gog, Tamara

2017-12-01

Health profession learners can foster clinical reasoning by studying worked examples presenting fully worked out solutions to a clinical problem. It is possible to improve the learning effect of these worked examples by combining them with other learning activities based on concept maps. This study investigated which combinaison of activities, worked examples study with concept map completion or worked examples study with concept map study, fosters more meaningful learning of intervention knowledge in physiotherapy students. Moreover, this study compared the learning effects of these learning activity combinations between novice and advanced learners. Sixty-one second-year physiotherapy students participated in the study which included a pre-test phase, a 130-min guided-learning phase and a four-week self-study phase. During the guided and self-study learning sessions, participants had to study three written worked examples presenting the clinical reasoning for selecting electrotherapeutic currents to treat patients with motor deficits. After each example, participants engaged in either concept map completion or concept map study depending on which learning condition they were randomly allocated to. Students participated in an immediate post-test at the end of the guided-learning phase and a delayed post-test at the end of the self-study phase. Post-tests assessed the understanding of principles governing the domain of knowledge to be learned (conceptual knowledge) and the ability to solve new problems that have similar (i.e., near transfer) or different (i.e., far transfer) solution rationales as problems previously studied in the examples. Learners engaged in concept map completion outperformed those engaged in concept map study on near transfer (p = .010) and far transfer (p < .001) performance. There was a significant interaction effect of learners' prior ability and learning condition on conceptual knowledge but not on near and far transfer performance. Worked examples study combined with concept map completion led to greater transfer performance than worked examples study combined with concept map study for both novice and advanced learners. Concept map completion might give learners better insight into what they have and have not yet learned, allowing them to focus on those aspects during subsequent example study.

Investigating the correlation between wastewater analysis and roadside drug testing in South Australia.

PubMed

Bade, Richard; Tscharke, Benjamin J; Longo, Marie; Cooke, Richard; White, Jason M; Gerber, Cobus

2018-06-01

The societal impact of drug use is well known. An example is when drug-intoxicated drivers increase the burden on policing and healthcare services. This work presents the correlation of wastewater analysis (using UHPLC-MS/MS) and positive roadside drug testing results for methamphetamine, 3,4-methylenedioxymethamphetamine (MDMA) and cannabis from December 2011-December 2016 in South Australia. Methamphetamine and MDMA showed similar trends between the data sources with matching increases and decreases, respectively. Cannabis was relatively steady based on wastewater analysis, but the roadside drug testing data started to diverge in the final part of the measurement period. The ability to triangulate data as shown here validates both wastewater analysis and roadside drug testing. This suggests that changes in overall population drug use revealed by WWA is consistent and proportional with changes in drug-driving behaviours. The results show that, at higher levels of drug use as measured by wastewater analysis, there is an increase in drug driving in the community and therefore more strain on health services and police. Copyright © 2018 Elsevier B.V. All rights reserved.

Research on aspheric focusing lens processing and testing technology in the high-energy laser test system

NASA Astrophysics Data System (ADS)

Liu, Dan; Fu, Xiu-hua; Jia, Zong-he; Wang, Zhe; Dong, Huan

2014-08-01

In the high-energy laser test system, surface profile and finish of the optical element are put forward higher request. Taking a focusing aspherical zerodur lens with a diameter of 100mm as example, using CNC and classical machining method of combining surface profile and surface quality of the lens were investigated. Taking profilometer and high power microscope measurement results as a guide, by testing and simulation analysis, process parameters were improved constantly in the process of manufacturing. Mid and high frequency error were trimmed and improved so that the surface form gradually converged to the required accuracy. The experimental results show that the final accuracy of the surface is less than 0.5μm and the surface finish is □, which fulfils the accuracy requirement of aspherical focusing lens in optical system.

Extraction, scrub, and strip test results for the salt waste processing facility caustic side solvent extraction solvent example

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.

An Extraction, Scrub, and Strip (ESS) test was performed on a sample of Salt Waste Processing Facility (SWPF) Caustic-Side Solvent Extraction (CSSX) solvent and salt simulant to determine cesium distribution ratios (D(Cs)), and cesium concentration in the strip effluent (SE) and decontaminated salt solution (DSS) streams; this data will be used by Parsons to help determine if the solvent is qualified for use at the SWPF. The ESS test showed acceptable performance of the solvent for extraction, scrub, and strip operations. The extraction D(Cs) measured 12.9, exceeding the required value of 8. This value is consistent with results from previousmore » ESS tests using similar solvent formulations. Similarly, scrub and strip cesium distribution ratios fell within acceptable ranges.« less

Testing for association with multiple traits in generalized estimation equations, with application to neuroimaging data.

PubMed

Zhang, Yiwei; Xu, Zhiyuan; Shen, Xiaotong; Pan, Wei

2014-08-01

There is an increasing need to develop and apply powerful statistical tests to detect multiple traits-single locus associations, as arising from neuroimaging genetics and other studies. For example, in the Alzheimer's Disease Neuroimaging Initiative (ADNI), in addition to genome-wide single nucleotide polymorphisms (SNPs), thousands of neuroimaging and neuropsychological phenotypes as intermediate phenotypes for Alzheimer's disease, have been collected. Although some classic methods like MANOVA and newly proposed methods may be applied, they have their own limitations. For example, MANOVA cannot be applied to binary and other discrete traits. In addition, the relationships among these methods are not well understood. Importantly, since these tests are not data adaptive, depending on the unknown association patterns among multiple traits and between multiple traits and a locus, these tests may or may not be powerful. In this paper we propose a class of data-adaptive weights and the corresponding weighted tests in the general framework of generalized estimation equations (GEE). A highly adaptive test is proposed to select the most powerful one from this class of the weighted tests so that it can maintain high power across a wide range of situations. Our proposed tests are applicable to various types of traits with or without covariates. Importantly, we also analytically show relationships among some existing and our proposed tests, indicating that many existing tests are special cases of our proposed tests. Extensive simulation studies were conducted to compare and contrast the power properties of various existing and our new methods. Finally, we applied the methods to an ADNI dataset to illustrate the performance of the methods. We conclude with the recommendation for the use of the GEE-based Score test and our proposed adaptive test for their high and complementary performance. Copyright © 2014 Elsevier Inc. All rights reserved.

Chemistry inside an epistemological community box! Discursive exclusions and inclusions in Swedish National tests in Chemistry

NASA Astrophysics Data System (ADS)

Ståhl, Marie; Hussénius, Anita

2017-06-01

This study examined the Swedish national tests in chemistry for implicit and explicit values. The chemistry subject is understudied compared to biology and physics and students view chemistry as their least interesting science subject. The Swedish national science assessments aim to support equitable and fair evaluation of students, to concretize the goals in the chemistry syllabus and to increase student achievement. Discourse and multimodal analyses, based on feminist and critical didactic theories, were used to examine the test's norms and values. The results revealed that the chemistry discourse presented in the tests showed a traditional view of science from the topics discussed (for example, oil and metal), in the way women, men and youth are portrayed, and how their science interests are highlighted or neglected. An elitist view of science emerges from the test, with distinct gender and age biases. Students could interpret these biases as a message that only "the right type" of person may come into the chemistry epistemological community, that is, into this special sociocultural group that harbours a common view about this knowledge. This perspective may have an impact on students' achievement and thereby prevent support for an equitable and fair evaluation. Understanding the underlying evaluative meanings that come with science teaching is a question of democracy since it may affect students' feelings of inclusion or exclusion. The norms and values harboured in the tests will also affect teaching since the teachers are given examples of how the goals in the syllabus can be concretized.

A Multi-Scale Framework for Multi-Field Analyses of Smart Composites

DTIC Science & Technology

2015-01-15

purchased from Advanced Cerametrics Incorporated, consist of PZT 5A fibers dispersed in an epoxy matrix. Kapton layers and electrode fingers are placed...tests in the longitudinal fiber direction, at different rates and temperatures: 25oC, 50oC, and 75oC. Figure 2 shows examples of PZT Positive... PZT and active fiber composites at various frequencies at temperatures 25oC and 75oC. Figure 4 Hysteretic polarization at room temperature with

Composite Material from By-products and Its Properties

NASA Astrophysics Data System (ADS)

Šeps, K.; Broukalová, I.; Vodička, J.

2017-09-01

The paper shows an example of utilization of specific textile admixture - fluffs of torn textiles from waste cars in production of composite with aggregate consisting entirely of unsorted recycled concrete. The admixture in the mixture of recycled concrete and cement binder fills the pores and voids in composite. The elaborated composite has working title STEREDconcrete. In the article, basic mechanical-physical properties of the composite are presented also the fire resistance of STEREDconcrete, which was determined in tests.

Controlling Hazardous Noise and Dust within the Industrial Workforce using a Simple Barrier

DTIC Science & Technology

2009-03-01

hazards, many operations still require respiratory protection. For example, a recent compilation of data showed three out of the four AF beadblast...sound shadow” (Driscoll & Royster, 2003). While full and partial enclosures have been tested in above ground mining, no published data was found to...remainder of the noise data for each position can be found at appendix A. The results of the TA measurement are shown in table 9. Due to the

Defining, illustrating and reflecting on logic analysis with an example from a professional development program.

PubMed

Tremblay, Marie-Claude; Brousselle, Astrid; Richard, Lucie; Beaudet, Nicole

2013-10-01

Program designers and evaluators should make a point of testing the validity of a program's intervention theory before investing either in implementation or in any type of evaluation. In this context, logic analysis can be a particularly useful option, since it can be used to test the plausibility of a program's intervention theory using scientific knowledge. Professional development in public health is one field among several that would truly benefit from logic analysis, as it appears to be generally lacking in theorization and evaluation. This article presents the application of this analysis method to an innovative public health professional development program, the Health Promotion Laboratory. More specifically, this paper aims to (1) define the logic analysis approach and differentiate it from similar evaluative methods; (2) illustrate the application of this method by a concrete example (logic analysis of a professional development program); and (3) reflect on the requirements of each phase of logic analysis, as well as on the advantages and disadvantages of such an evaluation method. Using logic analysis to evaluate the Health Promotion Laboratory showed that, generally speaking, the program's intervention theory appeared to have been well designed. By testing and critically discussing logic analysis, this article also contributes to further improving and clarifying the method. Copyright © 2013 Elsevier Ltd. All rights reserved.

On the design and analysis of clinical trials with correlated outcomes

PubMed Central

Follmann, Dean; Proschan, Michael

2014-01-01

SUMMARY The convention in clinical trials is to regard outcomes as independently distributed, but in some situations they may be correlated. For example, in infectious diseases, correlation may be induced if participants have contact with a common infectious source, or share hygienic tips that prevent infection. This paper discusses the design and analysis of randomized clinical trials that allow arbitrary correlation among all randomized volunteers. This perspective generalizes the traditional perspective of strata, where patients are exchangeable within strata, and independent across strata. For theoretical work, we focus on the test of no treatment effect μ1 − μ0 = 0 when the n dimensional vector of outcomes follows a Gaussian distribution with known n × n covariance matrix Σ, where the half randomized to treatment (placebo) have mean response μ1 (μ0). We show how the new test corresponds to familiar tests in simple situations for independent, exchangeable, paired, and clustered data. We also discuss the design of trials where Σ is known before or during randomization of patients and evaluate randomization schemes based on such knowledge. We provide two complex examples to illustrate the method, one for a study of 23 family clusters with cardiomyopathy, the other where the malaria attack rates vary within households and clusters of households in a Malian village. PMID:25111420

Research by retrieving experiments.

PubMed

Blagosklonny, Mikhail V

2007-06-01

Newton did not discover that apples fall: the information was available prior to his gravitational hypothesis. Hypotheses can be tested not only by performing experiments but also by retrieving experiments from the literature (via PubMed, for example). Here I show how disconnected facts from known data, if properly connected, can generate novel predictions testable in turn by other published data. With examples from cell cycle, aging, cancer and other fields of biology and medicine, I discuss how new knowledge was and will be derived from old information. Millions of experiments have been already performed to test unrelated hypotheses and the results of those experiments are available to 'test' your hypotheses too. But most data (99% by some estimates) remain unpublished, because they were negative, seemed of low priority, or did not fit the story. Yet for other investigators those data may be valuable. The well-known story of Franklin and Watson is a case in point. By making preliminary data widely available, 'data-owners' will benefit most, receiving the credit for otherwise unused results. If posted (pre-published) on searchable databases, these data may fuel thousands of projects without the need for repetitive experiments. Enormous 'pre-published' databases coupled with Google-like search engines can change the structure of scientific research, and shrinking funding will make this inevitable.

Symbolic magnitude processing in elementary school children: A group administered paper-and-pencil measure (SYMP Test).

PubMed

Brankaer, Carmen; Ghesquière, Pol; De Smedt, Bert

2017-08-01

The ability to compare symbolic numerical magnitudes correlates with children's concurrent and future mathematics achievement. We developed and evaluated a quick timed paper-and-pencil measure that can easily be used, for example in large-scale research, in which children have to cross out the numerically larger of two Arabic one- and two-digit numbers (SYMP Test). We investigated performance on this test in 1,588 primary school children (Grades 1-6) and examined in each grade its associations with mathematics achievement. The SYMP Test had satisfactory test-retest reliability. The SYMP Test showed significant and stable correlations with mathematics achievement for both one-digit and two-digit comparison, across all grades. This replicates the previously observed association between symbolic numerical magnitude processing and mathematics achievement, but extends it by showing that the association is observed in all grades in primary education and occurs for single- as well as multi-digit processing. Children with mathematical learning difficulties performed significantly lower on one-digit comparison and two-digit comparison in all grades. This all suggests satisfactory construct and criterion-related validity of the SYMP Test, which can be used in research, when performing large-scale (intervention) studies, and by practitioners, as screening measure to identify children at risk for mathematical difficulties or dyscalculia.

40 CFR 1065.275 - N2O measurement devices.

Code of Federal Regulations, 2014 CFR

2014-07-01

... procedures for interpretation of infrared spectra. For example, EPA Test Method 320 is considered a valid... infrared analyzer. Examples of laser infrared analyzers are pulsed-mode high-resolution narrow band mid... for analysis. Examples of acceptable columns are a PLOT column consisting of bonded polystyrene...

40 CFR 1065.275 - N2O measurement devices.

Code of Federal Regulations, 2012 CFR

2012-07-01

... for interpretation of infrared spectra. For example, EPA Test Method 320 is considered a valid method... uncompensated signal's bias. Examples of laser infrared analyzers are pulsed-mode high-resolution narrow band.... Examples of acceptable columns are a PLOT column consisting of bonded polystyrene-divinylbenzene or a...

The use of piezocone tests for high-resolution stratigraphy of Quaternary sediment sequences in the Brazilian coast.

PubMed

de Mio, Giuliano; Giacheti, Heraldo L

2007-03-01

Correlations between mapping units of costal sedimentary basin and interpretation of piezocone test results are presented and discussed based on examples from Caravelas strandplain, (State of Bahia), Paranaguá (State of Paraná) and Guarujá bays (State of São Paulo), Brazil. Recognizing that the sedimentary environment was mainly controlled by sea level fluctuations led to the interpretation of transgressive and regressive sedimentary sequences, which is in a good agreement with the sea level fluctuation curves currently accepted for these regions. The interpretation of piezocone test results shows that the sedimentary sequences of Caravelas and Guarujá sites are similar and they have a good correlation to the sea level fluctuation curve accepted for Salvador region, State of Bahia. On the other hand, the piezocone test results from Paranaguá site indicate a different sedimentary sequence from the previous ones, relating to the sea level fluctuation curve accepted for Paranaguá region. The results show the high applicability of piezocone testing for stratigraphical logging and suggest that it is possible to integrate it with other current techniques used for paleo-environmental studies in Brazil, in accordance with recent approaches used in international research on the subject.

Creation of a Data Base on Energetic Materials

DTIC Science & Technology

1987-08-10

Examples of booster explosives are Tetryl, RDX , and HMX . Examples of bursting explosives are Amatols, TNT, Compositions A, B, & C, and Picatrol. Within...Test Thermal Shock Resistance Glass Transition Temperature Toxicity Grain Size Viscosity Hardness Volatility Heat Capacity Water Resistance Heat of...Tensile Strength Flammability Thermal Conductivity Flexural Strength Thermal Expansion Coefficient Gap Test Thermal Shock Resistance Glass Transition

Effects of Worked Examples in a Primary School Mathematics Curriculum

ERIC Educational Resources Information Center

van Loon-Hillen, Nelleke; van Gog, Tamara; Brand-Gruwel, Saskia

2012-01-01

A large body of research has shown that for novice learners, instruction that relies more heavily on worked examples than on problem solving, is more effective for learning as shown by higher test performance. Moreover, this beneficial effect is often obtained with less acquisition time and lower cognitive load during acquisition and test phase.…

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2013 CFR

2013-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2010 CFR

2010-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2014 CFR

2014-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2011 CFR

2011-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

39 CFR 320.6 - Suspension for extremely urgent letters.

Code of Federal Regulations, 2012 CFR

2012-07-01

... qualify under the loss-of-value test set out in paragraph (b) of this section. Example (4). The same HMO's... would not qualify under the test set out in paragraph (b) of this section. Example (9). An organization... all post routes for extremely urgent letters if the conditions of either paragraph (b) or (c) of this...

An example problem illustrating the application of the national lime association mixture design and testing protocol (MDTP) to ascertain engineering properties of lime-treated subgrades for mechanistic pavement design/analysis.

DOT National Transportation Integrated Search

2001-09-01

This document presents an example of mechanistic design and analysis using a mix design and : testing protocol. More specifically, it addresses the structural properties of lime-treated subgrade, : subbase, and base layers through mechanistic design ...

High-Stakes Testing and Student Achievement: Problems for the No Child Left Behind Act. Appendices

ERIC Educational Resources Information Center

Nichols, Sharon L.; Glass, Gene V.; Berliner, David C.

2005-01-01

This paper presents the appendices to the "High-Stakes Testing and Student Achievement: Problems for the No Child Left Behind Act" report. It contains the following appendices: (1) Example of Context for Assessing State-Level Stakes Sheet--Connecticut; (2) Example of Completed Rewards and Sanctions Worksheet--Connecticut; (3) Directions…

20 CFR 220.52 - Failure to appear at a consultative examination.

Code of Federal Regulations, 2010 CFR

2010-04-01

... not have good reason for failing or refusing to take part in a consultative examination or test which... good reason for failure to appear, another examination or test will be scheduled. (b) Examples of good reasons for failure to appear. Some examples of good reasons for not going to a scheduled examination or...

Habitability as a Tier One Criterion in Exploration Mission and Vehicle Design. Part 1; Habitability

NASA Technical Reports Server (NTRS)

Adams, Constance M.; McCurdy, Matthew Riegel

1999-01-01

Habitability and human factors are necessary criteria to include in the iterative process of Tier I mission design. Bringing these criteria in at the first, conceptual stage of design for exploration and other human-rated missions can greatly reduce mission development costs, raise the level of efficiency and viability, and improve the chances of success. In offering a rationale for this argument, the authors give an example of how the habitability expert can contribute to early mission and vehicle architecture by defining the formal implications of a habitable vehicle, assessing the viability of units already proposed for exploration missions on the basis of these criteria, and finally, by offering an optimal set of solutions for an example mission. In this, the first of three papers, we summarize the basic factors associated with habitability, delineate their formal implications for crew accommodations in a long-duration environment, and show examples of how these principles have been applied in two projects at NASA's Johnson Space Center: the BIO-Plex test facility, and TransHab.

Delamination Modeling of Composites for Improved Crash Analysis

NASA Technical Reports Server (NTRS)

Fleming, David C.

1999-01-01

Finite element crash modeling of composite structures is limited by the inability of current commercial crash codes to accurately model delamination growth. Efforts are made to implement and assess delamination modeling techniques using a current finite element crash code, MSC/DYTRAN. Three methods are evaluated, including a straightforward method based on monitoring forces in elements or constraints representing an interface; a cohesive fracture model proposed in the literature; and the virtual crack closure technique commonly used in fracture mechanics. Results are compared with dynamic double cantilever beam test data from the literature. Examples show that it is possible to accurately model delamination propagation in this case. However, the computational demands required for accurate solution are great and reliable property data may not be available to support general crash modeling efforts. Additional examples are modeled including an impact-loaded beam, damage initiation in laminated crushing specimens, and a scaled aircraft subfloor structures in which composite sandwich structures are used as energy-absorbing elements. These examples illustrate some of the difficulties in modeling delamination as part of a finite element crash analysis.

Resource Materials for Nanoscale Science and Technology Education

NASA Astrophysics Data System (ADS)

Lisensky, George

2006-12-01

Nanotechnology and advanced materials examples can be used to explore science and engineering concepts, exhibiting the "wow" and potential of nanotechnology, introducing prospective scientists to key ideas, and educating a citizenry capable of making well-informed technology-driven decisions. For example, material syntheses an atomic layer at a time have already revolutionized lighting and display technologies and dramatically expanded hard drive storage capacities. Resource materials include kits, models, and demonstrations that explain scanning probe microscopy, x-ray diffraction, information storage, energy and light, carbon nanotubes, and solid-state structures. An online Video Lab Manual, where movies show each step of the experiment, illustrates more than a dozen laboratory experiments involving nanoscale science and technology. Examples that are useful at a variety of levels when instructors provide the context include preparation of self-assembled monolayers, liquid crystals, colloidal gold, ferrofluid nanoparticles, nickel nanowires, solar cells, electrochromic thin films, organic light emitting diodes, and quantum dots. These resources have been developed, refined and class tested at institutions working with the Materials Research Science and Engineering Center on Nanostructured Interfaces at the University of Wisconsin-Madison (http://mrsec.wisc.edu/nano).

16 CFR 255.5 - Disclosure of material connections.

Code of Federal Regulations, 2014 CFR

2014-01-01

... expected by the audience), such connection must be fully disclosed. For example, when an endorser who... examples below. Example 1: A drug company commissions research on its product by an outside organization. The drug company determines the overall subject of the research (e.g., to test the efficacy of a newly...

16 CFR 255.5 - Disclosure of material connections.

Code of Federal Regulations, 2012 CFR

2012-01-01

... expected by the audience), such connection must be fully disclosed. For example, when an endorser who... examples below. Example 1: A drug company commissions research on its product by an outside organization. The drug company determines the overall subject of the research (e.g., to test the efficacy of a newly...

16 CFR 255.5 - Disclosure of material connections.

Code of Federal Regulations, 2013 CFR

2013-01-01

... expected by the audience), such connection must be fully disclosed. For example, when an endorser who... examples below. Example 1: A drug company commissions research on its product by an outside organization. The drug company determines the overall subject of the research (e.g., to test the efficacy of a newly...

16 CFR 255.5 - Disclosure of material connections.

Code of Federal Regulations, 2011 CFR

2011-01-01

... expected by the audience), such connection must be fully disclosed. For example, when an endorser who... examples below. Example 1: A drug company commissions research on its product by an outside organization. The drug company determines the overall subject of the research (e.g., to test the efficacy of a newly...

Using Worked Examples Assignments in Classroom Instruction

ERIC Educational Resources Information Center

Paré-Blagoev, Juliana; Booth, Julie; Elliot, Andrew; Koedinger, Ken

2013-01-01

As highlighted by the National Math Panel Report (2008), consistent results from laboratory studies have demonstrated that interleaving worked examples with problems to solve improves learning for novices. The purpose of this work is to create materials and tests that can be used flexibly in classrooms and which employ worked examples interleaved…

Detection of bottled explosives by near infrared

NASA Astrophysics Data System (ADS)

Itozaki, Hideo; Sato-Akaba, Hideo

2013-10-01

Bottled liquids are not allowed through the security gate in the airport, because liquid explosives have been used by the terrorists. However, passengers have a lot of trouble if they cannot bring their own bottles. For example, a mother would like to carry her own milk in the airplane for her baby. Therefore the detection technology of liquid explosives should be developed as soon as possible. This paper shows that near infrared spectroscopy can detect bottled explosives quickly. The transmission method cannot deal with milk in the sense of liquid inspection. Here we examined the reflection method to the test of milk. The inspection method with light cannot make test for the metal can. We also use ultrasonic method to check metal can simultaneously in order to expand test targets.

[Youth drinking as en example of relationship between risk behaviour and knowledge on its effects].

PubMed

Wrona-Wolny, Weronika; Brudecki, Janusz

2006-01-01

Using psychoactive substances like smoking, drinking or drugs are most common risky behaviour. In the article only drinking as an examples was analysed. Knowledge about alcohol health effects and its dependence on undertaking risky behaviour, alcohol-advertisement perception, sex and group were analysed. Between 2001 and 2005 343 sportsmen and 400 students as a control group were participated in research. Questionnaire diagnosed alcohol-related behaviour and alcohol-advertisement perceptions were used. Knowledge about effects of alcohol acting contains 11 questions. Chi-square test and multifactor analysis of variances were used. Results show that knowledge level depends only from group belonging and is higher in students than sportsmen. Susceptibility to undertaking risky behaviour occurs more frequently in control than in sport group, in man then woman, and in person with who pay attention to alcohol advertisements.

How discordant morphological and molecular evolution among microorganisms can revise our notions of biodiversity on earth

PubMed Central

Lahr, Daniel J. G.; Laughinghouse, H. Dail; Oliverio, Angela; Gao, Feng; Katz, Laura A.

2014-01-01

Microscopy has revealed a tremendous diversity of bacterial and eukaryotic forms. More recent molecular analyses show discordance in estimates of biodiversity based on morphological analyses. Moreover, phylogenetic analyses of the diversity of microbial forms have revealed evidence of convergence at scales as large as interdomain – i.e. convergent forms shared between bacteria and eukaryotes. Here, we highlight examples of such discordance, focusing on exemplary lineages such as testate amoebae, ciliates and cyanobacteria, which have long histories of morphological study. We discuss examples in two categories: 1) morphologically identical (or highly similar) individuals that are genetically distinct and 2) morphologically distinct individuals that are genetically distinct. We argue that hypotheses about discordance can be tested using the concept of neutral morphologies, or more broadly neutral phenotypes, as a null hypothesis. PMID:25156897

Do the design concepts used for the space flight hardware directly affect cell structure and/or cell function ground based simulations

NASA Technical Reports Server (NTRS)

Chapman, David K.

1989-01-01

The use of clinostats and centrifuges to explore the hypogravity range between zero and 1 g is described. Different types of clinostat configurations and clinostat-centrifuge combinations are compared. Some examples selected from the literature and current research in gravitational physiology are presented to show plant responses in the simulated hypogravity region of the g-parameter (0 is greater than g is greater than 1). The validation of clinostat simulation is discussed. Examples in which flight data can be compared to clinostat data are presented. The data from 3 different laboratories using 3 different plant species indicate that clinostat simulation in some cases were qualitatively similar to flight data, but that in all cases were quantitatively different. The need to conduct additional tests in weightlessness is emphasized.

A cubic map chaos criterion theorem with applications in generalized synchronization based pseudorandom number generator and image encryption.

PubMed

Yang, Xiuping; Min, Lequan; Wang, Xue

2015-05-01

This paper sets up a chaos criterion theorem on a kind of cubic polynomial discrete maps. Using this theorem, Zhou-Song's chaos criterion theorem on quadratic polynomial discrete maps and generalized synchronization (GS) theorem construct an eight-dimensional chaotic GS system. Numerical simulations have been carried out to verify the effectiveness of theoretical results. The chaotic GS system is used to design a chaos-based pseudorandom number generator (CPRNG). Using FIPS 140-2 test suit/Generalized FIPS 140-2, test suit tests the randomness of two 1000 key streams consisting of 20 000 bits generated by the CPRNG, respectively. The results show that there are 99.9%/98.5% key streams to have passed the FIPS 140-2 test suit/Generalized FIPS 140-2 test. Numerical simulations show that the different keystreams have an average 50.001% same codes. The key space of the CPRNG is larger than 2(1345). As an application of the CPRNG, this study gives an image encryption example. Experimental results show that the linear coefficients between the plaintext and the ciphertext and the decrypted ciphertexts via the 100 key streams with perturbed keys are less than 0.00428. The result suggests that the decrypted texts via the keystreams generated via perturbed keys of the CPRNG are almost completely independent on the original image text, and brute attacks are needed to break the cryptographic system.

A cubic map chaos criterion theorem with applications in generalized synchronization based pseudorandom number generator and image encryption

NASA Astrophysics Data System (ADS)

Yang, Xiuping; Min, Lequan; Wang, Xue

2015-05-01

This paper sets up a chaos criterion theorem on a kind of cubic polynomial discrete maps. Using this theorem, Zhou-Song's chaos criterion theorem on quadratic polynomial discrete maps and generalized synchronization (GS) theorem construct an eight-dimensional chaotic GS system. Numerical simulations have been carried out to verify the effectiveness of theoretical results. The chaotic GS system is used to design a chaos-based pseudorandom number generator (CPRNG). Using FIPS 140-2 test suit/Generalized FIPS 140-2, test suit tests the randomness of two 1000 key streams consisting of 20 000 bits generated by the CPRNG, respectively. The results show that there are 99.9%/98.5% key streams to have passed the FIPS 140-2 test suit/Generalized FIPS 140-2 test. Numerical simulations show that the different keystreams have an average 50.001% same codes. The key space of the CPRNG is larger than 21345. As an application of the CPRNG, this study gives an image encryption example. Experimental results show that the linear coefficients between the plaintext and the ciphertext and the decrypted ciphertexts via the 100 key streams with perturbed keys are less than 0.00428. The result suggests that the decrypted texts via the keystreams generated via perturbed keys of the CPRNG are almost completely independent on the original image text, and brute attacks are needed to break the cryptographic system.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Xiuping, E-mail: yangxiuping-1990@163.com; Min, Lequan, E-mail: minlequan@sina.com; Wang, Xue, E-mail: wangxue-20130818@163.com

This paper sets up a chaos criterion theorem on a kind of cubic polynomial discrete maps. Using this theorem, Zhou-Song's chaos criterion theorem on quadratic polynomial discrete maps and generalized synchronization (GS) theorem construct an eight-dimensional chaotic GS system. Numerical simulations have been carried out to verify the effectiveness of theoretical results. The chaotic GS system is used to design a chaos-based pseudorandom number generator (CPRNG). Using FIPS 140-2 test suit/Generalized FIPS 140-2, test suit tests the randomness of two 1000 key streams consisting of 20 000 bits generated by the CPRNG, respectively. The results show that there are 99.9%/98.5% keymore » streams to have passed the FIPS 140-2 test suit/Generalized FIPS 140-2 test. Numerical simulations show that the different keystreams have an average 50.001% same codes. The key space of the CPRNG is larger than 2{sup 1345}. As an application of the CPRNG, this study gives an image encryption example. Experimental results show that the linear coefficients between the plaintext and the ciphertext and the decrypted ciphertexts via the 100 key streams with perturbed keys are less than 0.00428. The result suggests that the decrypted texts via the keystreams generated via perturbed keys of the CPRNG are almost completely independent on the original image text, and brute attacks are needed to break the cryptographic system.« less

Classification

NASA Astrophysics Data System (ADS)

Oza, Nikunj

2012-03-01

A supervised learning task involves constructing a mapping from input data (normally described by several features) to the appropriate outputs. A set of training examples— examples with known output values—is used by a learning algorithm to generate a model. This model is intended to approximate the mapping between the inputs and outputs. This model can be used to generate predicted outputs for inputs that have not been seen before. Within supervised learning, one type of task is a classification learning task, in which each output is one or more classes to which the input belongs. For example, we may have data consisting of observations of sunspots. In a classification learning task, our goal may be to learn to classify sunspots into one of several types. Each example may correspond to one candidate sunspot with various measurements or just an image. A learning algorithm would use the supplied examples to generate a model that approximates the mapping between each supplied set of measurements and the type of sunspot. This model can then be used to classify previously unseen sunspots based on the candidate’s measurements. The generalization performance of a learned model (how closely the target outputs and the model’s predicted outputs agree for patterns that have not been presented to the learning algorithm) would provide an indication of how well the model has learned the desired mapping. More formally, a classification learning algorithm L takes a training set T as its input. The training set consists of |T| examples or instances. It is assumed that there is a probability distribution D from which all training examples are drawn independently—that is, all the training examples are independently and identically distributed (i.i.d.). The ith training example is of the form (x_i, y_i), where x_i is a vector of values of several features and y_i represents the class to be predicted.* In the sunspot classification example given above, each training example would represent one sunspot’s classification (y_i) and the corresponding set of measurements (x_i). The output of a supervised learning algorithm is a model h that approximates the unknown mapping from the inputs to the outputs. In our example, h would map from the sunspot measurements to the type of sunspot. We may have a test set S—a set of examples not used in training that we use to test how well the model h predicts the outputs on new examples. Just as with the examples in T, the examples in S are assumed to be independent and identically distributed (i.i.d.) draws from the distribution D. We measure the error of h on the test set as the proportion of test cases that h misclassifies: 1/|S| Sigma(x,y union S)[I(h(x)!= y)] where I(v) is the indicator function—it returns 1 if v is true and 0 otherwise. In our sunspot classification example, we would identify additional examples of sunspots that were not used in generating the model, and use these to determine how accurate the model is—the fraction of the test samples that the model classifies correctly. An example of a classification model is the decision tree shown in Figure 23.1. We will discuss the decision tree learning algorithm in more detail later—for now, we assume that, given a training set with examples of sunspots, this decision tree is derived. This can be used to classify previously unseen examples of sunpots. For example, if a new sunspot’s inputs indicate that its "Group Length" is in the range 10-15, then the decision tree would classify the sunspot as being of type “E,” whereas if the "Group Length" is "NULL," the "Magnetic Type" is "bipolar," and the "Penumbra" is "rudimentary," then it would be classified as type "C." In this chapter, we will add to the above description of classification problems. We will discuss decision trees and several other classification models. In particular, we will discuss the learning algorithms that generate these classification models, how to use them to classify new examples, and the strengths and weaknesses of these models. We will end with pointers to further reading on classification methods applied to astronomy data.

Hydrography synthesis using LANDSAT remote sensing and the SCS models

NASA Technical Reports Server (NTRS)

Ragan, R. M.; Jackson, T. J.

1976-01-01

The land cover requirements of the Soil Conservation Service (SCS) Model used for hydrograph synthesis in urban areas were modified to be LANDSAT compatible. The Curve Numbers obtained with these alternate land cover categories compare well with those obtained in published example problems using the conventional categories. Emergency spillway hydrographs and synthetic flood frequency flows computed for a 21.1 sq. mi. test area showed excellent agreement between the conventional aerial photo-based and the Landsat-based SCS approaches.

Evaluation of fuel equipment operability of diesel locomotive engine with use of infrared receivers

NASA Astrophysics Data System (ADS)

Ovcharenko, S. M.; Balagin, O. V.; Balagin, D. V.

2018-03-01

This paper provides results of modelling the heat liberation in high-pressure pipeline of fuel equipment of diesel locomotive engines. Functional relationships between the technical state of fuel equipment and temperature of the outer surface of the high-pressure fuel pipeline are presented using the example of diesel locomotive engine 1-PD4D. The paper shows results of operational tests of the developed method for control of fuel equipment operability of diesel locomotive.

Aerospace reliability applied to biomedicine.

NASA Technical Reports Server (NTRS)

Lalli, V. R.; Vargo, D. J.

1972-01-01

An analysis is presented that indicates that the reliability and quality assurance methodology selected by NASA to minimize failures in aerospace equipment can be applied directly to biomedical devices to improve hospital equipment reliability. The Space Electric Rocket Test project is used as an example of NASA application of reliability and quality assurance (R&QA) methods. By analogy a comparison is made to show how these same methods can be used in the development of transducers, instrumentation, and complex systems for use in medicine.

Strain gauges used in the mechanical testing of bones. Part II: "In vitro" and "in vivo" technique.

PubMed

Cordey, J; Gautier, E

1999-01-01

How to choose and prepare the strain gauges for bonding on bones "in vitro" and "in vivo"? This communication aims to elucidate technical details and some applications: direct assessment of the axial load, the bending moment, and the torque applied to long bones by the physiological loads. As a typical example of application, we will show the assessment of stress protection due to plates on the bones in the sheep tibia.

Multiobjective assessment of distributed energy storage location in electricity networks

NASA Astrophysics Data System (ADS)

Ribeiro Gonçalves, José António; Neves, Luís Pires; Martins, António Gomes

2017-07-01

This paper presents a methodology to provide information to a decision maker on the associated impacts, both of economic and technical nature, of possible management schemes of storage units for choosing the best location of distributed storage devices, with a multiobjective optimisation approach based on genetic algorithms. The methodology was applied to a case study, a known distribution network model in which the installation of distributed storage units was tested, using lithium-ion batteries. The obtained results show a significant influence of the charging/discharging profile of batteries on the choice of their best location, as well as the relevance that these choices may have for the different network management objectives, for example, for reducing network energy losses or minimising voltage deviations. Results also show a difficult cost-effectiveness of an energy-only service, with the tested systems, both due to capital cost and due to the efficiency of conversion.

[Value of positive auto controls in the gel centrifugation method].

PubMed

Eichler, H; Kretschmer, V

1994-01-01

We studied 97 samples of patients being positive in the autocontrol of the indirect antiglobulin test (IAT) in the gel system (DiaMed). In 83.2%, retesting with monospecific anti-IgG serum gave also positive results, due to a specific phenomenon caused, for example, by drug-specific antibodies (AB), warm auto-AB or allo-AB. In contrast, only 52.9% of the samples retested by the standard tube technique with polyspecific antiglobulin serum reacted positive. Only in 6 patients slightly increased cold agglutinins could be detected. None of the investigated patients showed any clinical or laboratory signs of hemolysis except one with pernicious anemia. We conclude that positive results of the autocontrol in the gel IAT should be confirmed by an additional DAT in the tube technique. If this second test shows a negative result, transfusions can take place without any restrictions.

Evidence that insect herbivores are deterred by ant pheromones.

PubMed Central

Offenberg, Joachim; Nielsen, Mogens Gissel; MacIntosh, Donald J; Havanon, Sopon; Aksornkoae, Sanit

2004-01-01

It is well documented that ants can protect plants against insect herbivores, but the underlying mechanisms remain almost undocumented. We propose and test the pheromone avoidance hypothesis--an indirect mechanism where insect herbivores are repelled not only by ants but also by ant pheromones. Herbivores subjected to ant predation will experience a selective advantage if they evolve mechanisms enabling them to avoid feeding within ant territories. Such a mechanism could be based on the ability to detect and evade ant pheromones. Field observations and data from the literature showed that the ant Oecophylla smaragdina distributes persistent pheromones throughout its territory. In addition, a laboratory test showed that the beetle Rhyparida wallacei, which this ant preys on, was reluctant to feed on leaves sampled within ant territories compared with leaves sampled outside territories. Thus, this study provides an example of an ant-herbivore system conforming to the pheromone avoidance hypothesis. PMID:15801596

Design and Test of an Improved Crashworthiness Small Composite Airframe

NASA Technical Reports Server (NTRS)

Terry, James E.; Hooper, Steven J.; Nicholson, Mark

2002-01-01

The purpose of this small business innovative research (SBIR) program was to evaluate the feasibility of developing small composite airplanes with improved crashworthiness. A combination of analysis and half scale component tests were used to develop an energy absorbing airframe. Four full scale crash tests were conducted at the NASA Impact Dynamics Research Facility, two on a hard surface and two onto soft soil, replicating earlier NASA tests of production general aviation airplanes. Several seat designs and restraint systems including both an air bag and load limiting shoulder harnesses were tested. Tests showed that occupant loads were within survivable limits with the improved structural design and the proper combination of seats and restraint systems. There was no loss of cabin volume during the events. The analysis method developed provided design guidance but time did not allow extending the analysis to soft soil impact. This project demonstrated that survivability improvements are possible with modest weight penalties. The design methods can be readily applied by airplane designers using the examples in this report.

Example Elaboration as a Neglected Instructional Strategy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

Over the last decade an unfolding cognitive-psychology research program on how learners use examples to develop effective problem solving expertise has yielded well-established empirical findings. Chi et al., Renkl, Reimann, and Neubert (in various papers) have confirmed statistically significant differences in how good and poor learners inferentially elaborate (self explain) example steps as they study. Such example elaboration is highly relevant to software documentation and training, yet largely neglected in the current literature. This paper summarizes the neglected research on example use and puts its neglect in a disciplinary perspective. The author then shows that differences in support for examplemore » elaboration in commercial software documentation reveal previously over looked usability issues. These issues involve example summaries, using goals and goal structures to reinforce example elaborations, and prompting readers to recognize the role of example parts. Secondly, I show how these same example elaboration techniques can build cognitive maturity among underperforming high school students who study technical writing. Principle based elaborations, condition elaborations, and role recognition of example steps all have their place in innovative, high school level, technical writing exercises, and all promote far transfer problem solving. Finally, I use these studies to clarify the constructivist debate over what writers and readers contribute to text meaning. I argue that writers can influence how readers elaborate on examples, and that because of the great empirical differences in example study effectiveness (and reader choices) writers should do what they can (through within text design features) to encourage readers to elaborate examples in the most successful ways. Example elaboration is a uniquely effective way to learn from worked technical examples. This paper summarizes years of research that clarifies example elaboration. I then show how example elaboration can make complex software documentation more useful, improve the benefits of technical writing exercises for underperforming students, and enlighten the general discussion of how writers can and should help their readers.« less

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing.

PubMed

Wardrip, Nathaniel C; Arnusch, Christopher J

2016-02-13

Minimization and management of membrane fouling is a formidable challenge in diverse industrial processes and other practices that utilize membrane technology. Understanding the fouling process could lead to optimization and higher efficiency of membrane based filtration. Here we show the design and fabrication of an automated three-dimensionally (3-D) printed microfluidic cross-flow filtration system that can test up to 4 membranes in parallel. The microfluidic cells were printed using multi-material photopolymer 3-D printing technology, which used a transparent hard polymer for the microfluidic cell body and incorporated a thin rubber-like polymer layer, which prevents leakages during operation. The performance of ultrafiltration (UF), and nanofiltration (NF) membranes were tested and membrane fouling could be observed with a model foulant bovine serum albumin (BSA). Feed solutions containing BSA showed flux decline of the membrane. This protocol may be extended to measure fouling or biofouling with many other organic, inorganic or microbial containing solutions. The microfluidic design is especially advantageous for testing materials that are costly or only available in small quantities, for example polysaccharides, proteins, or lipids due to the small surface area of the membrane being tested. This modular system may also be easily expanded for high throughput testing of membranes.

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing

PubMed Central

Wardrip, Nathaniel C.; Arnusch, Christopher J.

2016-01-01

Minimization and management of membrane fouling is a formidable challenge in diverse industrial processes and other practices that utilize membrane technology. Understanding the fouling process could lead to optimization and higher efficiency of membrane based filtration. Here we show the design and fabrication of an automated three-dimensionally (3-D) printed microfluidic cross-flow filtration system that can test up to 4 membranes in parallel. The microfluidic cells were printed using multi-material photopolymer 3-D printing technology, which used a transparent hard polymer for the microfluidic cell body and incorporated a thin rubber-like polymer layer, which prevents leakages during operation. The performance of ultrafiltration (UF), and nanofiltration (NF) membranes were tested and membrane fouling could be observed with a model foulant bovine serum albumin (BSA). Feed solutions containing BSA showed flux decline of the membrane. This protocol may be extended to measure fouling or biofouling with many other organic, inorganic or microbial containing solutions. The microfluidic design is especially advantageous for testing materials that are costly or only available in small quantities, for example polysaccharides, proteins, or lipids due to the small surface area of the membrane being tested. This modular system may also be easily expanded for high throughput testing of membranes.  PMID:26968008

Evaluation of genotoxicity testing of FDA approved large molecule therapeutics.

PubMed

Sawant, Satin G; Fielden, Mark R; Black, Kurt A

2014-10-01

Large molecule therapeutics (MW>1000daltons) are not expected to enter the cell and thus have reduced potential to interact directly with DNA or related physiological processes. Genotoxicity studies are therefore not relevant and typically not required for large molecule therapeutic candidates. Regulatory guidance supports this approach; however there are examples of marketed large molecule therapeutics where sponsors have conducted genotoxicity studies. A retrospective analysis was performed on genotoxicity studies of United States FDA approved large molecule therapeutics since 1998 identified through the Drugs@FDA website. This information was used to provide a data-driven rationale for genotoxicity evaluations of large molecule therapeutics. Fifty-three of the 99 therapeutics identified were tested for genotoxic potential. None of the therapeutics tested showed a positive outcome in any study except the peptide glucagon (GlucaGen®) showing equivocal in vitro results, as stated in the product labeling. Scientific rationale and data from this review indicate that testing of a majority of large molecule modalities do not add value to risk assessment and support current regulatory guidance. Similarly, the data do not support testing of peptides containing only natural amino acids. Peptides containing non-natural amino acids and small molecules in conjugated products may need to be tested. Copyright © 2014 Elsevier Inc. All rights reserved.

Innovation in the development of plasma propulsion devices in Israel

NASA Astrophysics Data System (ADS)

Lev, Dan R.

2017-04-01

In this paper we review plasma propulsion development approach which focuses on innovation. We then bring the example of the state of Israel in general, and Rafael in particular, and show how it has adopted an innovative approach to develop a low power Hall thruster and a low current cathode. To present one special test-case of innovation we elaborate upon the development process of a heaterless hollow cathode that was developed at Rafael. In particular, by presenting the cathode characterization and wear test results we demonstrate that the heaterless cathode developed has a sufficiently wide operational range and may operate continuously for 1,500 hours without any measurable degradation in performance.

The potential role of hypocortisolism in the pathophysiology of PTSD and psoriasis.

PubMed

Thaller, V; Vrkljan, M; Hotujac, L; Thakore, J

1999-12-01

Different physical, chemical and psychological stressors can provoke a unique but different endocrine response involving activation of the hypothalamo-pituitary-adrenal (HPA) axis. Inability of adequate compensatory reaction can lead to many disorders. The aim of our study was comparison of cortisol values in diseases provoked by various stressors. Our investigation included 34 posttraumatic stress disorder (PTSD) patients, as an example of disorder caused by extremely strong, acute stressful stimulus, 19 psoriatic patients, as an example of chronic stress stimulus and 17 healthy volunteers. In each patient we determined 24-hour urinary cortisol, serum cortisol at 8 a.m. and 5 p.m., and cortisol in dexamethasone suppression test by the standard radioimmunoassay (RIA) method. PTSD patients showed lower urinary 24-hour cortisol values, (361 +/- 28 nmol/24 h), "stronger" circadian rhythm of serum cortisol (595 +/- 57 nmol/l at 8 a.m. and 242 +/- 23 nmol/l at 5 p.m.) and attenuated suppression of cortisol in dexamethasone suppression test (197 +/- 45 nmol/l) in comparison to healthy volunteers (590 +/- 87 nmol/24 h urine, 590 +/- 32 nmol/l at 8 a.m., 402 +/- 31 nmol/l, and < 86 nmol/l in dexa test). Psoriatic patients showed markedly lower 24-hour cortisol values (150 +/- 98 nmol/24 h), even in comparison to PTSD patients, then serum cortisol values (404 +/- 138 nmol/l at 8 a.m., 187 +/- 80 nmol/l at 5 p.m.) and enhanced suppression of cortisol (23 +/- 5 nmol/l). The model of attenuated feedback inhibition in PTSD patients shows that they are unusually reactive to stress and represents an alternative model of acute stress reaction to extremely strong stressful stimulus. Unusually low cortisol values in psoriatic patients correlate to our hypothesis that in chronic stress-related disease, as psoriasis is, exists, by still undefined mechanism, altered HPA axis function, which is obviously incompetent to realise its immunoregulatory function, so consequentially, clinical signs of psoriasis persist.

Advanced Nanoindentation Testing for Studying Strain-Rate Sensitivity and Activation Volume

NASA Astrophysics Data System (ADS)

Maier-Kiener, Verena; Durst, Karsten

2017-11-01

Nanoindentation became a versatile tool for testing local mechanical properties beyond hardness and modulus. By adapting standard nanoindentation test methods, simple protocols capable of probing thermally activated deformation processes can be accomplished. Abrupt strain-rate changes within one indentation allow determining the strain-rate dependency of hardness at various indentation depths. For probing lower strain-rates and excluding thermal drift influences, long-term creep experiments can be performed by using the dynamic contact stiffness for determining the true contact area. From both procedures hardness and strain-rate, and consequently strain-rate sensitivity and activation volume can be reliably deducted within one indentation, permitting information on the locally acting thermally activated deformation mechanism. This review will first discuss various testing protocols including possible challenges and improvements. Second, it will focus on different examples showing the direct influence of crystal structure and/or microstructure on the underlying deformation behavior in pure and highly alloyed material systems.

Supporting read-across using biological data.

PubMed

Zhu, Hao; Bouhifd, Mounir; Donley, Elizabeth; Egnash, Laura; Kleinstreuer, Nicole; Kroese, E Dinant; Liu, Zhichao; Luechtefeld, Thomas; Palmer, Jessica; Pamies, David; Shen, Jie; Strauss, Volker; Wu, Shengde; Hartung, Thomas

2016-01-01

Read-across, i.e. filling toxicological data gaps by relating to similar chemicals, for which test data are available, is usually done based on chemical similarity. Besides structure and physico-chemical properties, however, biological similarity based on biological data adds extra strength to this process. In the context of developing Good Read-Across Practice guidance, a number of case studies were evaluated to demonstrate the use of biological data to enrich read-across. In the simplest case, chemically similar substances also show similar test results in relevant in vitro assays. This is a well-established method for the read-across of e.g. genotoxicity assays. Larger datasets of biological and toxicological properties of hundreds and thousands of substances become increasingly available enabling big data approaches in read-across studies. Several case studies using various big data sources are described in this paper. An example is given for the US EPA's ToxCast dataset allowing read-across for high quality uterotrophic assays for estrogenic endocrine disruption. Similarly, an example for REACH registration data enhancing read-across for acute toxicity studies is given. A different approach is taken using omics data to establish biological similarity: Examples are given for stem cell models in vitro and short-term repeated dose studies in rats in vivo to support read-across and category formation. These preliminary biological data-driven read-across studies highlight the road to the new generation of read-across approaches that can be applied in chemical safety assessment.

t4 report1

PubMed Central

Zhu, Hao; Bouhifd, Mounir; Kleinstreuer, Nicole; Kroese, E. Dinant; Liu, Zhichao; Luechtefeld, Thomas; Pamies, David; Shen, Jie; Strauss, Volker; Wu, Shengde; Hartung, Thomas

2016-01-01

Summary Read-across, i.e. filling toxicological data gaps by relating to similar chemicals, for which test data are available, is usually done based on chemical similarity. Besides structure and physico-chemical properties, however, biological similarity based on biological data adds extra strength to this process. In the context of developing Good Read-Across Practice guidance, a number of case studies were evaluated to demonstrate the use of biological data to enrich read-across. In the simplest case, chemically similar substances also show similar test results in relevant in vitro assays. This is a well-established method for the read-across of e.g. genotoxicity assays. Larger datasets of biological and toxicological properties of hundreds and thousands of substances become increasingly available enabling big data approaches in read-across studies. Several case studies using various big data sources are described in this paper. An example is given for the US EPA’s ToxCast dataset allowing read-across for high quality uterotrophic assays for estrogenic endocrine disruption. Similarly, an example for REACH registration data enhancing read-across for acute toxicity studies is given. A different approach is taken using omics data to establish biological similarity: Examples are given for stem cell models in vitro and short-term repeated dose studies in rats in vivo to support read-across and category formation. These preliminary biological data-driven read-across studies highlight the road to the new generation of read-across approaches that can be applied in chemical safety assessment. PMID:26863516

29 CFR 4022.104 - Examples.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Examples. 4022.104 Section 4022.104 Labor Regulations... Future Periods After Death § 4022.104 Examples. The following examples show how the rules in §§ 4022.101.... (1) Example 1: where surviving beneficiary predeceases participant. Ellen died before Charlie. As...

29 CFR 4022.95 - Examples.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Examples. 4022.95 Section 4022.95 Labor Regulations... IN TERMINATED SINGLE-EMPLOYER PLANS Certain Payments Owed Upon Death § 4022.95 Examples. The following examples show how the rules in §§ 4022.91 through 4022.94 apply. For examples on how these rules...

Flight testing of airbreathing hypersonic vehicles

NASA Technical Reports Server (NTRS)

Hicks, John W.

1993-01-01

Using the scramjet engine as the prime example of a hypersonic airbreathing concept, this paper reviews the history of and addresses the need for hypersonic flight tests. It also describes how such tests can contribute to the development of airbreathing technology. Aspects of captive-carry and free-flight concepts are compared. An incremental flight envelope expansion technique for manned flight vehicles is also described. Such critical issues as required instrumentation technology and proper scaling of experimental devices are addressed. Lastly, examples of international flight test approaches, existing programs, or concepts currently under study, development, or both, are given.

40 CFR 1065.275 - N2O measurement devices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for interpretation of infrared spectra. For example, EPA Test Method 320 is considered a valid method... and length to achieve adequate resolution of the N2O peak for analysis. Examples of acceptable columns....550(b) that would otherwise apply. For example, you may perform a span gas measurement before and...

40 CFR 1065.275 - N2O measurement devices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... for interpretation of infrared spectra. For example, EPA Test Method 320 is considered a valid method... and length to achieve adequate resolution of the N2O peak for analysis. Examples of acceptable columns....550(b) that would otherwise apply. For example, you may perform a span gas measurement before and...

Specificity, transfer, and the development of expertise

NASA Astrophysics Data System (ADS)

Brookes, David T.; Ross, Brian H.; Mestre, José P.

2011-06-01

In this paper we present the results of two experiments designed to understand how physics students’ learning of the concept of refraction is influenced by the cognitive phenomenon of “specificity.” In both experiments participants learned why light bends as it travels from one optical medium to another with an analogy made to a car driving from paved road into mud and vice versa. They then learned how to qualitatively draw the direction of refracted light rays with an example of a glass prism. One group learned with a rectangular prism example while a second group learned with a triangular prism example. In a transfer test, the participants revealed how, even when they seemed able to implement the refraction concept, their responses were biased by the example they had seen. Participants frequently violated the refraction principle they had just learned (reversing the bend direction) in order to make sure their response matched the surface features of their learning example. This tended to happen when their test question looked superficially similar to their learning example. We discuss the implications of these results for physics instruction.

Using a TV Game Show to Explain the Concept of a Dominant Strategy.

ERIC Educational Resources Information Center

Trandel, Gregory A.

1999-01-01

Illustrates the game-theory concept of a dominant strategy using the MTV-network game show "Singled Out." Describes how the game show works and why this makes it attractive as an example of strategic behavior. Presents examples of how the show is used in class. (DSK)

Ubiquitous Geometry: Some Examples Showing the Significance of Size and Shape in the Works of Man and Nature.

ERIC Educational Resources Information Center

Bachman, C. H.

1988-01-01

Presents examples to show the ubiquitous nature of geometry. Illustrates the relationship between the perimeter and area of two-dimensional objects and between the area and volume of three-dimensional objects. Provides examples of distribution systems, optimum shapes, structural strength, biological heat engines, man's size, and reflection and…

Testing Convergence Versus History: Convergence Dominates Phenotypic Evolution for over 150 Million Years in Frogs.

PubMed

Moen, Daniel S; Morlon, Hélène; Wiens, John J

2016-01-01

Striking evolutionary convergence can lead to similar sets of species in different locations, such as in cichlid fishes and Anolis lizards, and suggests that evolution can be repeatable and predictable across clades. Yet, most examples of convergence involve relatively small temporal and/or spatial scales. Some authors have speculated that at larger scales (e.g., across continents), differing evolutionary histories will prevent convergence. However, few studies have compared the contrasting roles of convergence and history, and none have done so at large scales. Here we develop a two-part approach to test the scale over which convergence can occur, comparing the relative importance of convergence and history in macroevolution using phylogenetic models of adaptive evolution. We apply this approach to data from morphology, ecology, and phylogeny from 167 species of anuran amphibians (frogs) from 10 local sites across the world, spanning ~160 myr of evolution. Mapping ecology on the phylogeny revealed that similar microhabitat specialists (e.g., aquatic, arboreal) have evolved repeatedly across clades and regions, producing many evolutionary replicates for testing for morphological convergence. By comparing morphological optima for clades and microhabitat types (our first test), we find that convergence associated with microhabitat use dominates frog morphological evolution, producing recurrent ecomorphs that together encompass all sampled species in each community in each region. However, our second test, which examines whether and how much species differ from their inferred optima, shows that convergence is incomplete: that is, phenotypes of most species are still somewhat distant from the estimated optimum for each microhabitat, seemingly because of insufficient time for more complete adaptation (an effect of history). Yet, these effects of history are related to past ecologies, and not clade membership. Overall, our study elucidates the dominant drivers of morphological evolution across a major vertebrate clade and shows that evolution can be repeatable at much greater temporal and spatial scales than commonly thought. It also provides an analytical framework for testing other potential examples of large-scale convergence. © The Author(s) 2015. Published by Oxford University Press, on behalf of the Society of Systematic Biologists. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The relationship between stochastic and deterministic quasi-steady state approximations.

PubMed

Kim, Jae Kyoung; Josić, Krešimir; Bennett, Matthew R

2015-11-23

The quasi steady-state approximation (QSSA) is frequently used to reduce deterministic models of biochemical networks. The resulting equations provide a simplified description of the network in terms of non-elementary reaction functions (e.g. Hill functions). Such deterministic reductions are frequently a basis for heuristic stochastic models in which non-elementary reaction functions are used to define reaction propensities. Despite their popularity, it remains unclear when such stochastic reductions are valid. It is frequently assumed that the stochastic reduction can be trusted whenever its deterministic counterpart is accurate. However, a number of recent examples show that this is not necessarily the case. Here we explain the origin of these discrepancies, and demonstrate a clear relationship between the accuracy of the deterministic and the stochastic QSSA for examples widely used in biological systems. With an analysis of a two-state promoter model, and numerical simulations for a variety of other models, we find that the stochastic QSSA is accurate whenever its deterministic counterpart provides an accurate approximation over a range of initial conditions which cover the likely fluctuations from the quasi steady-state (QSS). We conjecture that this relationship provides a simple and computationally inexpensive way to test the accuracy of reduced stochastic models using deterministic simulations. The stochastic QSSA is one of the most popular multi-scale stochastic simulation methods. While the use of QSSA, and the resulting non-elementary functions has been justified in the deterministic case, it is not clear when their stochastic counterparts are accurate. In this study, we show how the accuracy of the stochastic QSSA can be tested using their deterministic counterparts providing a concrete method to test when non-elementary rate functions can be used in stochastic simulations.

Asymmetric inner wedge group sequential tests with applications to verifying whether effective drug concentrations are similar in adults and children.

PubMed

Hampson, Lisa V; Fisch, Roland; Van, Linh M; Jaki, Thomas

2017-02-10

Extrapolating from information available on one patient group to support conclusions about another is common in clinical research. For example, the findings of clinical trials, often conducted in highly selective patient cohorts, are routinely extrapolated to wider populations by policy makers. Meanwhile, the results of adult trials may be used to support conclusions about the effects of a medicine in children. For example, if the effective concentration of a drug can be assumed to be similar in adults and children, an appropriate paediatric dosing rule may be found by 'bridging', that is, by matching the adult effective concentration. However, this strategy may result in children receiving an ineffective or hazardous dose if, in fact, effective concentrations differ between adults and children. When there is uncertainty about the equality of effective concentrations, some pharmacokinetic-pharmacodynamic data may be needed in children to verify that differences are small. In this paper, we derive optimal group sequential tests that can be used to verify this assumption efficiently. Asymmetric inner wedge tests are constructed that permit early stopping to accept or reject an assumption of similar effective drug concentrations in adults and children. Asymmetry arises because the consequences of under- and over-dosing may differ. We show how confidence intervals can be obtained on termination of these tests and illustrate the small sample operating characteristics of designs using simulation. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

High Fidelity Modeling of Field-Reversed Configuration (FRC) Thrusters (Briefing Charts)

DTIC Science & Technology

2017-05-24

Converged Math → Irrelevant Solutions? Validation: Fluids Example Stoke’s Flow MARTIN, SOUSA, TRAN (AFRL/RQRS) DISTRIBUTION A - APPROVED FOR PUBLIC RELEASE...Convergence Tests Converged Math → Irrelevant Solutions? Must be Aware of Valid Assumption Regions Validation: Fluids Example Stoke’s Flow Potential...AND VALIDATION Verification: Asymptotic Models → Analytical Solutions Yields Exact Convergence Tests Converged Math → Irrelevant Solutions? Must be

78 FR 14394 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... will remain at the original price at which it was posted to the EDGA Book. Example 1: EDGA Only/Post... Upper Price Band. Example 2: Price Band Moves Higher Than EDGA Only/Post Only Buy Order on the EDGA Book... and a short sale price test restriction under Rule 201 of Regulation SHO (``short sale price test...

Testing a single regression coefficient in high dimensional linear models

PubMed Central

Zhong, Ping-Shou; Li, Runze; Wang, Hansheng; Tsai, Chih-Ling

2017-01-01

In linear regression models with high dimensional data, the classical z-test (or t-test) for testing the significance of each single regression coefficient is no longer applicable. This is mainly because the number of covariates exceeds the sample size. In this paper, we propose a simple and novel alternative by introducing the Correlated Predictors Screening (CPS) method to control for predictors that are highly correlated with the target covariate. Accordingly, the classical ordinary least squares approach can be employed to estimate the regression coefficient associated with the target covariate. In addition, we demonstrate that the resulting estimator is consistent and asymptotically normal even if the random errors are heteroscedastic. This enables us to apply the z-test to assess the significance of each covariate. Based on the p-value obtained from testing the significance of each covariate, we further conduct multiple hypothesis testing by controlling the false discovery rate at the nominal level. Then, we show that the multiple hypothesis testing achieves consistent model selection. Simulation studies and empirical examples are presented to illustrate the finite sample performance and the usefulness of the proposed method, respectively. PMID:28663668

Testing a single regression coefficient in high dimensional linear models.

PubMed

Lan, Wei; Zhong, Ping-Shou; Li, Runze; Wang, Hansheng; Tsai, Chih-Ling

2016-11-01

In linear regression models with high dimensional data, the classical z -test (or t -test) for testing the significance of each single regression coefficient is no longer applicable. This is mainly because the number of covariates exceeds the sample size. In this paper, we propose a simple and novel alternative by introducing the Correlated Predictors Screening (CPS) method to control for predictors that are highly correlated with the target covariate. Accordingly, the classical ordinary least squares approach can be employed to estimate the regression coefficient associated with the target covariate. In addition, we demonstrate that the resulting estimator is consistent and asymptotically normal even if the random errors are heteroscedastic. This enables us to apply the z -test to assess the significance of each covariate. Based on the p -value obtained from testing the significance of each covariate, we further conduct multiple hypothesis testing by controlling the false discovery rate at the nominal level. Then, we show that the multiple hypothesis testing achieves consistent model selection. Simulation studies and empirical examples are presented to illustrate the finite sample performance and the usefulness of the proposed method, respectively.

CFD to Flight: Some Recent Success Stories of X-Plane Design to Flight Test at the NASA Dryden Flight Research Center

NASA Technical Reports Server (NTRS)

Cosentino, Gary B.

2007-01-01

Several examples from the past decade of success stories involving the design and flight test of three true X-planes will be described: in particular, X-plane design techniques that relied heavily upon computational fluid dynamics (CFD). Three specific examples chosen from the author s personal experience are presented: the X-36 Tailless Fighter Agility Research Aircraft, the X-45A Unmanned Combat Air Vehicle, and, most recently, the X-48B Blended Wing Body Demonstrator Aircraft. An overview will be presented of the uses of CFD analysis, comparisons and contrasts with wind tunnel testing, and information derived from the CFD analysis that directly related to successful flight test. Some lessons learned on the proper application, and misapplication, of CFD are illustrated. Finally, some highlights of the flight-test results of the three example X-planes will be presented. This overview paper will discuss some of the author s experience with taking an aircraft shape from early concept and three-dimensional modeling through CFD analysis, wind tunnel testing, further refined CFD analysis, and, finally, flight. An overview of the key roles in which CFD plays well during this process, and some other roles in which it does not, are discussed. How wind tunnel testing complements, calibrates, and verifies CFD analysis is also covered. Lessons learned on where CFD results can be misleading are also given. Strengths and weaknesses of the various types of flow solvers, including panel methods, Euler, and Navier-Stokes techniques, are discussed. The paper concludes with the three specific examples, including some flight test video footage of the X-36, the X-45A, and the X-48B.

CFD to Flight: Some Recent Success Stories of X-plane Design to Flight Test at the NASA Dryden Flight Research Center

NASA Technical Reports Server (NTRS)

Cosentino, Gary B.

2007-01-01

Several examples from the past decade of success stories involving the design and ight test of three true X-planes will be described: in particular, X-plane design techniques that relied heavily upon computational fluid dynamics (CFD). Three specific examples chosen from the authors personal experience are presented: the X-36 Tailless Fighter Agility Research Aircraft, the X-45A Unmanned Combat Air Vehicle, and, most recently, the X-48B Blended Wing Body Demonstrator Aircraft. An overview will be presented of the uses of CFD analysis, comparisons and contrasts with wind tunnel testing, and information derived from the CFD analysis that directly related to successful flight test. Some lessons learned on the proper application, and misapplication, of CFD are illustrated. Finally, some highlights of the flight-test results of the three example X-planes will be presented. This overview paper will discuss some of the authors experience with taking an aircraft shape from early concept and three-dimensional modeling through CFD analysis, wind tunnel testing, further re ned CFD analysis, and, finally, flight. An overview of the key roles in which CFD plays well during this process, and some other roles in which it does not, are discussed. How wind tunnel testing complements, calibrates, and verifies CFD analysis is also covered. Lessons learned on where CFD results can be misleading are also given. Strengths and weaknesses of the various types of ow solvers, including panel methods, Euler, and Navier-Stokes techniques, are discussed. The paper concludes with the three specific examples, including some flight test video footage of the X-36, the X-45A, and the X-48B.

Promoting College Students' Construction of Problem Schemata in Statistics Using Schema-Emphasizing Worked Examples

ERIC Educational Resources Information Center

Yan, Jie

2010-01-01

In this study, the effectiveness of worked examples that emphasizes problem features (data type, number of groups, purpose of analysis) associated with specific problem types (t-test, chi-square, correlation) were examined on students' construction of problem schemata compared to traditional solution-only worked examples. A sample of 96 students…

Special report. Drug testing in the workplace: an update.

PubMed

1994-10-01

Workplace drug testing has become widespread in the U.S. and is a major component of the nation's "war on drugs." A recent annual survey by the American Management Association shows that the number of workplace drug-testing programs in surveyed companies grew almost 300% between 1987 and 1993. Nearly 85% of the 630 firms responding to the 1993 survey conduct some form of drug testing. Among activities sparking interest in drug testing are some highly publicized catastrophes in which drugs or alcohol played a major role--for example, the Exxon Valdez oil spill in Alaska which raised concern over threats to public safety. While the popularity of drug testing has increased, programs have been criticized at the same time for being inaccurate, costly, invasive of privacy, and even illegal in certain cases. As alternatives to urinalysis and other tests, companies have introduced impairment tests--also called performance tests and "fitness-for-duty" tests--which are computer-based and measure employees' eye-hand coordination or cognitive skills. Tests also have been introduced to detect drug residues on surfaces. In this report, we'll review some recent studies on drug testing and some of the programs currently being conducted.

Incorporating gene-environment interaction in testing for association with rare genetic variants.

PubMed

Chen, Han; Meigs, James B; Dupuis, Josée

2014-01-01

The incorporation of gene-environment interactions could improve the ability to detect genetic associations with complex traits. For common genetic variants, single-marker interaction tests and joint tests of genetic main effects and gene-environment interaction have been well-established and used to identify novel association loci for complex diseases and continuous traits. For rare genetic variants, however, single-marker tests are severely underpowered due to the low minor allele frequency, and only a few gene-environment interaction tests have been developed. We aimed at developing powerful and computationally efficient tests for gene-environment interaction with rare variants. In this paper, we propose interaction and joint tests for testing gene-environment interaction of rare genetic variants. Our approach is a generalization of existing gene-environment interaction tests for multiple genetic variants under certain conditions. We show in our simulation studies that our interaction and joint tests have correct type I errors, and that the joint test is a powerful approach for testing genetic association, allowing for gene-environment interaction. We also illustrate our approach in a real data example from the Framingham Heart Study. Our approach can be applied to both binary and continuous traits, it is powerful and computationally efficient.

Order-restricted inference for multivariate longitudinal data with applications to the natural history of hearing loss.

PubMed

Rosen, Sophia; Davidov, Ori

2012-07-20

Multivariate outcomes are often measured longitudinally. For example, in hearing loss studies, hearing thresholds for each subject are measured repeatedly over time at several frequencies. Thus, each patient is associated with a multivariate longitudinal outcome. The multivariate mixed-effects model is a useful tool for the analysis of such data. There are situations in which the parameters of the model are subject to some restrictions or constraints. For example, it is known that hearing thresholds, at every frequency, increase with age. Moreover, this age-related threshold elevation is monotone in frequency, that is, the higher the frequency, the higher, on average, is the rate of threshold elevation. This means that there is a natural ordering among the different frequencies in the rate of hearing loss. In practice, this amounts to imposing a set of constraints on the different frequencies' regression coefficients modeling the mean effect of time and age at entry to the study on hearing thresholds. The aforementioned constraints should be accounted for in the analysis. The result is a multivariate longitudinal model with restricted parameters. We propose estimation and testing procedures for such models. We show that ignoring the constraints may lead to misleading inferences regarding the direction and the magnitude of various effects. Moreover, simulations show that incorporating the constraints substantially improves the mean squared error of the estimates and the power of the tests. We used this methodology to analyze a real hearing loss study. Copyright © 2012 John Wiley & Sons, Ltd.

Biomarker selection for medical diagnosis using the partial area under the ROC curve

PubMed Central

2014-01-01

Background A biomarker is usually used as a diagnostic or assessment tool in medical research. Finding an ideal biomarker is not easy and combining multiple biomarkers provides a promising alternative. Moreover, some biomarkers based on the optimal linear combination do not have enough discriminatory power. As a result, the aim of this study was to find the significant biomarkers based on the optimal linear combination maximizing the pAUC for assessment of the biomarkers. Methods Under the binormality assumption we obtain the optimal linear combination of biomarkers maximizing the partial area under the receiver operating characteristic curve (pAUC). Related statistical tests are developed for assessment of a biomarker set and of an individual biomarker. Stepwise biomarker selections are introduced to identify those biomarkers of statistical significance. Results The results of simulation study and three real examples, Duchenne Muscular Dystrophy disease, heart disease, and breast tissue example are used to show that our methods are most suitable biomarker selection for the data sets of a moderate number of biomarkers. Conclusions Our proposed biomarker selection approaches can be used to find the significant biomarkers based on hypothesis testing. PMID:24410929

Atom interferometry in space: Thermal management and magnetic shielding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Milke, Alexander; Kubelka-Lange, André; Gürlebeck, Norman, E-mail: norman.guerlebeck@zarm.uni-bremen.de

2014-08-15

Atom interferometry is an exciting tool to probe fundamental physics. It is considered especially apt to test the universality of free fall by using two different sorts of atoms. The increasing sensitivity required for this kind of experiment sets severe requirements on its environments, instrument control, and systematic effects. This can partially be mitigated by going to space as was proposed, for example, in the Spacetime Explorer and Quantum Equivalence Principle Space Test (STE-QUEST) mission. However, the requirements on the instrument are still very challenging. For example, the specifications of the STE-QUEST mission imply that the Feshbach coils of themore » atom interferometer are allowed to change their radius only by about 260 nm or 2.6 × 10{sup −4} % due to thermal expansion although they consume an average power of 22 W. Also Earth's magnetic field has to be suppressed by a factor of 10{sup 5}. We show in this article that with the right design such thermal and magnetic requirements can indeed be met and that these are not an impediment for the exciting physics possible with atom interferometers in space.« less

Wing patterning genes and coevolution of Müllerian mimicry in Heliconius butterflies: Support from phylogeography, cophylogeny, and divergence times.

PubMed

Hoyal Cuthill, Jennifer F; Charleston, Michael

2015-12-01

Examples of long-term coevolution are rare among free-living organisms. Müllerian mimicry in Heliconius butterflies had been suggested as a key example of coevolution by early genetic studies. However, research over the last two decades has been dominated by the idea that the best-studied comimics, H. erato and H. melpomene, did not coevolve at all. Recently sequenced genes associated with wing color pattern phenotype offer a new opportunity to resolve this controversy. Here, we test the hypothesis of coevolution between H. erato and H. melpomene using Bayesian multilocus analysis of five color pattern genes and five neutral genetic markers. We first explore the extent of phylogenetic agreement versus conflict between the different genes. Coevolution is then tested against three aspects of the mimicry diversifications: phylogenetic branching patterns, divergence times, and, for the first time, phylogeographic histories. We show that all three lines of evidence are compatible with strict coevolution of the diverse mimicry wing patterns, contrary to some recent suggestions. Instead, these findings tally with a coevolutionary diversification driven primarily by the ecological force of Müllerian mimicry. © 2015 The Author(s). Evolution © 2015 The Society for the Study of Evolution.

Coping with Test Pain, Discomfort, and Anxiety

MedlinePlus

... help you relax. Many anti-nausea medications, for example, decrease anxiety as a natural side effect. Communicate ... different approach that better suits your needs. For example, if you have felt light-headed or have ...

Reliability on ISS Talk Outline

NASA Technical Reports Server (NTRS)

Misiora, Mike

2015-01-01

1. Overview of ISS 2. Space Environment and it effects a. Radiation b. Microgravity 3. How we ensure reliability a. Requirements b. Component Selection i. Note: I plan to stay away from talk about Rad Hardened components and talk about why we use older processors because they are less susceptible to SEUs. c. Testing d. Redundancy / Failure Tolerance e. Sparing strategies 4. Operational Examples a. Multiple MDM Failures on 6A due to hard drive failure In general, my plan is to only talk about data that is currently available via normal internet sources to ensure that I stay away from any topics that would be Export Controlled, ITAR, or NDA-controlled. The operational example has been well-reported on in the media and those are the details that I plan to cover. Additionally I am not planning on using any slides or showing any photos during the talk.

Medicine, material science and security: the versatility of the coded-aperture approach.

PubMed

Munro, P R T; Endrizzi, M; Diemoz, P C; Hagen, C K; Szafraniec, M B; Millard, T P; Zapata, C E; Speller, R D; Olivo, A

2014-03-06

The principal limitation to the widespread deployment of X-ray phase imaging in a variety of applications is probably versatility. A versatile X-ray phase imaging system must be able to work with polychromatic and non-microfocus sources (for example, those currently used in medical and industrial applications), have physical dimensions sufficiently large to accommodate samples of interest, be insensitive to environmental disturbances (such as vibrations and temperature variations), require only simple system set-up and maintenance, and be able to perform quantitative imaging. The coded-aperture technique, based upon the edge illumination principle, satisfies each of these criteria. To date, we have applied the technique to mammography, materials science, small-animal imaging, non-destructive testing and security. In this paper, we outline the theory of coded-aperture phase imaging and show an example of how the technique may be applied to imaging samples with a practically important scale.

Study of Radiographic Linear Indications and Subsequent Microstructural Features in Gas Tungsten Arc Welds of Inconel 718

NASA Technical Reports Server (NTRS)

Walley, J. L.; Nunes, A. C.; Clounch, J. L.; Russell, C. K.

2007-01-01

This study presents examples and considerations for differentiating linear radiographic indications produced by gas tungsten arc welds in a 0.05-in-thick sheet of Inconel 718. A series of welds with different structural features, including the enigma indications and other defect indications such as lack of fusion and penetration, were produced, radiographed, and examined metallographically. The enigma indications were produced by a large columnar grain running along the center of the weld nugget occurring when the weld speed was reduced sufficiently below nominal. Examples of respective indications, including the effect of changing the x-ray source location, are presented as an aid to differentiation. Enigma, nominal, and hot-weld specimens were tensile tested to demonstrate the harmlessness of the enigma indication. Statistical analysis showed that there is no difference between the strengths of these three weld conditions.

Testability of evolutionary game dynamics based on experimental economics data

NASA Astrophysics Data System (ADS)

Wang, Yijia; Chen, Xiaojie; Wang, Zhijian

2017-11-01

Understanding the dynamic processes of a real game system requires an appropriate dynamics model, and rigorously testing a dynamics model is nontrivial. In our methodological research, we develop an approach to testing the validity of game dynamics models that considers the dynamic patterns of angular momentum and speed as measurement variables. Using Rock-Paper-Scissors (RPS) games as an example, we illustrate the geometric patterns in the experiment data. We then derive the related theoretical patterns from a series of typical dynamics models. By testing the goodness-of-fit between the experimental and theoretical patterns, we show that the validity of these models can be evaluated quantitatively. Our approach establishes a link between dynamics models and experimental systems, which is, to the best of our knowledge, the most effective and rigorous strategy for ascertaining the testability of evolutionary game dynamics models.

Zero-inflated Conway-Maxwell Poisson Distribution to Analyze Discrete Data.

PubMed

Sim, Shin Zhu; Gupta, Ramesh C; Ong, Seng Huat

2018-01-09

In this paper, we study the zero-inflated Conway-Maxwell Poisson (ZICMP) distribution and develop a regression model. Score and likelihood ratio tests are also implemented for testing the inflation/deflation parameter. Simulation studies are carried out to examine the performance of these tests. A data example is presented to illustrate the concepts. In this example, the proposed model is compared to the well-known zero-inflated Poisson (ZIP) and the zero- inflated generalized Poisson (ZIGP) regression models. It is shown that the fit by ZICMP is comparable or better than these models.

Multiple Testing of Gene Sets from Gene Ontology: Possibilities and Pitfalls.

PubMed

Meijer, Rosa J; Goeman, Jelle J

2016-09-01

The use of multiple testing procedures in the context of gene-set testing is an important but relatively underexposed topic. If a multiple testing method is used, this is usually a standard familywise error rate (FWER) or false discovery rate (FDR) controlling procedure in which the logical relationships that exist between the different (self-contained) hypotheses are not taken into account. Taking those relationships into account, however, can lead to more powerful variants of existing multiple testing procedures and can make summarizing and interpreting the final results easier. We will show that, from the perspective of interpretation as well as from the perspective of power improvement, FWER controlling methods are more suitable than FDR controlling methods. As an example of a possible power improvement, we suggest a modified version of the popular method by Holm, which we also implemented in the R package cherry. © The Author 2015. Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

How to pass a sensor acceptance test: using the gap between acceptance criteria and operational performance

NASA Astrophysics Data System (ADS)

Bijl, Piet

2016-10-01

When acquiring a new imaging system and operational task performance is a critical factor for success, it is necessary to specify minimum acceptance requirements that need to be met using a sensor performance model and/or performance tests. Currently, there exist a variety of models and test from different origin (defense, security, road safety, optometry) and they all do different predictions. This study reviews a number of frequently used methods and shows the effects that small changes in procedure or threshold criteria can have on the outcome of a test. For example, a system may meet the acceptance requirements but not satisfy the needs for the operational task, or the choice of test may determine the rank order of candidate sensors. The goal of the paper is to make people aware of the pitfalls associated with the acquisition process, by i) illustrating potential tricks to have a system accepted that is actually not suited for the operational task, and ii) providing tips to avoid this unwanted situation.

Testing and Evaluation of Passive Radiation Detection Equipment for Homeland Security

DOE PAGES

West, David L.; Wood, Nathan L.; Forrester, Christina D.

2017-12-01

This article is concerned with test and evaluation methods for passive radiation detection equipment used in homeland security applications. The different types of equipment used in these applications are briefly reviewed and then test and evaluation methods discussed. The primary emphasis is on the test and evaluation standards developed by the American National Standards Institute’s N42 committees. Commonalities among the standards are then reviewed as well as examples of unique aspects for specific equipment types. Throughout, sample test configurations and results from testing and evaluation at Oak Ridge National Laboratory are given. The article concludes with a brief discussion ofmore » typical tests and evaluations not covered by the N42 standards and some examples of test and evaluation that involve the end users of the equipment.« less

Testing and Evaluation of Passive Radiation Detection Equipment for Homeland Security

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, David L.; Wood, Nathan L.; Forrester, Christina D.

This article is concerned with test and evaluation methods for passive radiation detection equipment used in homeland security applications. The different types of equipment used in these applications are briefly reviewed and then test and evaluation methods discussed. The primary emphasis is on the test and evaluation standards developed by the American National Standards Institute’s N42 committees. Commonalities among the standards are then reviewed as well as examples of unique aspects for specific equipment types. Throughout, sample test configurations and results from testing and evaluation at Oak Ridge National Laboratory are given. The article concludes with a brief discussion ofmore » typical tests and evaluations not covered by the N42 standards and some examples of test and evaluation that involve the end users of the equipment.« less

The relationship between memory and inductive reasoning: does it develop?

PubMed

Hayes, Brett K; Fritz, Kristina; Heit, Evan

2013-05-01

In 2 studies, the authors examined the development of the relationship between inductive reasoning and visual recognition memory. In both studies, 5- to 6-year-old children and adults were shown instances of a basic-level category (dogs) followed by a test set containing old and new category members that varied in their similarity to study items. Participants were given either recognition instructions (memorize study items and discriminate between old and new test items) or induction instructions (learn about a novel property shared by the study items and decide whether it generalizes to test items). Across both tasks, children made a greater number of positive responses than did adults. Across both age groups, a greater number of positive responses were made in induction than in recognition. The application of a mathematical model, called GEN-EX for generalization from examples, showed that both memory and reasoning data could be explained by a single exemplar-based process that assumes task and age differences in generalization gradients. These results show considerable developmental continuity in the cognitive processes that underlie memory and inductive reasoning.

Length bias correction in gene ontology enrichment analysis using logistic regression.

PubMed

Mi, Gu; Di, Yanming; Emerson, Sarah; Cumbie, Jason S; Chang, Jeff H

2012-01-01

When assessing differential gene expression from RNA sequencing data, commonly used statistical tests tend to have greater power to detect differential expression of genes encoding longer transcripts. This phenomenon, called "length bias", will influence subsequent analyses such as Gene Ontology enrichment analysis. In the presence of length bias, Gene Ontology categories that include longer genes are more likely to be identified as enriched. These categories, however, are not necessarily biologically more relevant. We show that one can effectively adjust for length bias in Gene Ontology analysis by including transcript length as a covariate in a logistic regression model. The logistic regression model makes the statistical issue underlying length bias more transparent: transcript length becomes a confounding factor when it correlates with both the Gene Ontology membership and the significance of the differential expression test. The inclusion of the transcript length as a covariate allows one to investigate the direct correlation between the Gene Ontology membership and the significance of testing differential expression, conditional on the transcript length. We present both real and simulated data examples to show that the logistic regression approach is simple, effective, and flexible.

Gradient microfluidics enables rapid bacterial growth inhibition testing.

PubMed

Li, Bing; Qiu, Yong; Glidle, Andrew; McIlvenna, David; Luo, Qian; Cooper, Jon; Shi, Han-Chang; Yin, Huabing

2014-03-18

Bacterial growth inhibition tests have become a standard measure of the adverse effects of inhibitors for a wide range of applications, such as toxicity testing in the medical and environmental sciences. However, conventional well-plate formats for these tests are laborious and provide limited information (often being restricted to an end-point assay). In this study, we have developed a microfluidic system that enables fast quantification of the effect of an inhibitor on bacteria growth and survival, within a single experiment. This format offers a unique combination of advantages, including long-term continuous flow culture, generation of concentration gradients, and single cell morphology tracking. Using Escherichia coli and the inhibitor amoxicillin as one model system, we show excellent agreement between an on-chip single cell-based assay and conventional methods to obtain quantitative measures of antibiotic inhibition (for example, minimum inhibition concentration). Furthermore, we show that our methods can provide additional information, over and above that of the standard well-plate assay, including kinetic information on growth inhibition and measurements of bacterial morphological dynamics over a wide range of inhibitor concentrations. Finally, using a second model system, we show that this chip-based systems does not require the bacteria to be labeled and is well suited for the study of naturally occurring species. We illustrate this using Nitrosomonas europaea, an environmentally important bacteria, and show that the chip system can lead to a significant reduction in the period required for growth and inhibition measurements (<4 days, compared to weeks in a culture flask).

Progress and Strategies for Testing of Materials for Solar Panels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurtz, Sarah

Accelerated testing is key to confident launch of a new product. However, for new products like solar panels, the best approach is not always clear. The challenge for materials manufacturers is that test times can be long. Also, small-coupon testing may not predict the behavior in the full-size module, but testing of the full-size module is too expensive. As a result, solar panel test standards like IEC 61215 are useful, but are not sufficient. Material manufacturers have needed to define their own test protocols. This presentation will review some historical data (e.g., data show that manufacturers are making great progressmore » toward reducing encapsulant discoloration) and describe advances in material testing (for example, new techniques are being demonstrated on how to more quantitatively assess adhesion, detect tendency for delamination, and understand how encapsulant properties affect other properties like cracking of cells). The International PV Quality Assurance Task Force has been researching climate-specific weathering tests toward the goal of defining international standards that would simplify qualification and quality assurance testing for materials. The status of these tests and the strategies for how to organize these standards to best meet the needs of the industry will be discussed.« less

Peer Assisted Learning Strategy for Improving Students’ Physiologic Literacy

NASA Astrophysics Data System (ADS)

Diana, S.

2017-09-01

Research about the implementation of the Peer Assisted Learning (PAL) strategy in Plant Physiology lecture has carried out, in which it aims to improve students’ physiologic literacy. The PAL strategy began with a briefing by the lecturers to the students tutor about pretest questions, followed by the interaction between student tutors with their peers to discuss response problems, terminated by answering responsiveness questions individually. This study used a quasi-experimental method, one - group pre-test post-test design. This design includes a group of students observed in the pre-test phase (tests carried out before PAL treatment) which is then followed by treatment with PAL and ends with post-test. The other students group (control) was given the pre-test and post-test only. The results showed that the PAL strategy can increase student’s physiologic literacy significantly. One of the weaknesses of students’ physiologic literacy is that they have not been able to read the graph. The faculties are encouraged to begin introducing and teaching material using a variety of strategies with scientific literacy aspects, for example teaching research-based material. All students respond positively to the PAL strategy.

Task 2 Report: Algorithm Development and Performance Analysis

DTIC Science & Technology

1993-07-01

separated peaks ............................................. 39 7-16 Example ILGC data for schedule 3 phosphites showing an analysis method which integrates...more closely follows the baseline ................. 40 7-18 Example R.GC data for schedule 3 phosphites showing an analysis method resulting in unwanted...much of the ambiguity that can arise in GC/MS with trace environmental samples, for example. Correlated chromatography, on the other hand, separates the

Factor V Leiden Mutation and PT 20210 Mutation Test

MedlinePlus

... is actually expressed. With Factor V Leiden, for example, only 10% of those with the Factor V ... an inherited risk factor for blood clots, for example, when an individual: Has a first deep venous ...

Using MATLAB Software on the Peregrine System | High-Performance Computing

Science.gov Websites

Learn how to run MATLAB software in batch mode on the Peregrine system. Below is an example MATLAB job in batch (non-interactive) mode. To try the example out, create both matlabTest.sub and /$USER. In this example, it is also the directory into which MATLAB will write the output file x.dat

Biocompatibility assessment of peritoneal dialysis solutions with a new in vitro model of preconditioned human HL60 cells.

PubMed

Koball, Sebastian; Korten, Gero; Stange, Jan; Schmidt, Reinhard; Mitzner, Steffen

2009-07-01

The purposes of this study were to test the human promyelocytic cell line HL60 for its usability as a new cell model for the immune barrier of the peritoneum, and to investigate the impact of different peritoneal dialysis (PD) solutions in the model. HL60 cells were stimulated by retinoic acid and recombinant human granulocyte and macrophage colony-stimulating factor to differentiate into neutrophilic granulocytes. Cells were incubated in different commercially available PD solutions. After a 4-h incubation, functional (chemiluminescence phagocytosis) and viability tests (Live-Dead, XTT) were performed. High glucose concentrations (>1.36%) and low pH values (<7.0) appeared to be detrimental for neutrophil functions and for neutrophil viability. There is a quantitative correlation between glucose concentration and the cytotoxicity of standard PD solutions (PD 1.36% glucose shows 42.6% higher chemiluminescence than PD 3.86% glucose [P < 0.05]). PD solution containing icodextrin shows 74.3% higher chemiluminescence than PD 3.86% glucose, and PD solution with amino acids shows 52.4% higher chemiluminescence than PD 3.86% glucose which is a sign for better biocompatibility in these tests (P < 0.05). The test system is useful for biocompatibility investigations of PD solutions and their effect on immune cells, for example, neutrophil granulocytes. It does not depend on donor variability and availability in comparison to models based on primary isolated leukocytes.

Computational Fluid Dynamics Analysis Success Stories of X-Plane Design to Flight Test

NASA Technical Reports Server (NTRS)

Cosentino, Gary B.

2008-01-01

Examples of the design and flight test of three true X-planes are described, particularly X-plane design techniques that relied heavily on computational fluid dynamics(CFD) analysis. Three examples are presented: the X-36 Tailless Fighter Agility Research Aircraft, the X-45A Unmanned Combat Air Vehicle, and the X-48B Blended Wing Body Demonstrator Aircraft. An overview is presented of the uses of CFD analysis, comparison and contrast with wind tunnel testing, and information derived from CFD analysis that directly related to successful flight test. Lessons learned on the proper and improper application of CFD analysis are presented. Highlights of the flight-test results of the three example X-planes are presented. This report discusses developing an aircraft shape from early concept and three-dimensional modeling through CFD analysis, wind tunnel testing, further refined CFD analysis, and, finally, flight. An overview of the areas in which CFD analysis does and does not perform well during this process is presented. How wind tunnel testing complements, calibrates, and verifies CFD analysis is discussed. Lessons learned revealing circumstances under which CFD analysis results can be misleading are given. Strengths and weaknesses of the various flow solvers, including panel methods, Euler, and Navier-Stokes techniques, are discussed.

History of optics: a modern teaching tool

NASA Astrophysics Data System (ADS)

Vazquez, D.; Gonzalez-Cano, A.; Diaz-Herrera, N.; Llombart, N.; Alda, J.

2012-10-01

The history of optics is a very rich field of science and it is possible to find many simple and significant examples of the application and success of the experimental method and therefore is a very good tool to transmit to the student the way science proceeds and to introduce the right spirit of critical analysis, building and testing of models, etc. Optical phenomena are specially well suited for this because in fact optical observations and experiments have made science advance in a crucial way in many different periods of history, because they are in many cases quite visual, quite simple in concept and it is very easy to produce experimental setups in classrooms. Also, the intrinsic multidisciplinary character of Optics, which is a subject that has historically influenced in a notorious way fields as art, philosophy, religion and cultural and social studies in general, provide a very wide frame that permits to apply these examples to many different auditories. We present here some reflections about the role that history of optics can play in teaching and show some real examples of its application during the many years that we have been employing it in the context of the Optics School of the Complutense University of Madrid, Spain.

Screening tests: a review with examples

PubMed Central

Niebo, Ron; Utell, Mark J.

2014-01-01

Screening tests are widely used in medicine to assess the likelihood that members of a defined population have a particular disease. This article presents an overview of such tests including the definitions of key technical (sensitivity and specificity) and population characteristics necessary to assess the benefits and limitations of such tests. Several examples are used to illustrate calculations, including the characteristics of low dose computed tomography as a lung cancer screen, choice of an optimal PSA cutoff and selection of the population to undergo mammography. The importance of careful consideration of the consequences of both false positives and negatives is highlighted. Receiver operating characteristic curves are explained as is the need to carefully select the population group to be tested. PMID:25264934

Application of Executable Architectures in Early Concept Evaluation

DTIC Science & Technology

2015-12-01

xi List of Tables Page Table 1: Confusion Matrix Format (with example threshold values) ............................... 37 Table 2: Confusion... Matrix Logic Example ...................................................................... 37 Table 3: Test Case Matrix ...43 Table 4: Sensor Low Target Detection Threshold Confusion Matrix

Selective Excitation of Lamb-Waves for Damage Detection in Composites

NASA Astrophysics Data System (ADS)

Petculescu, G.; Krishnaswamy, S.; Achenbach, J. D.

2006-03-01

Sensors based on periodic arrays of coherent piezoelectric sources (comb design) are used to selectively excite and detect Lamb waves in aluminum and AS4/3601 unidirectional carbon-epoxy plates. 110 μm PVDF film poled in the thickness direction is used as piezoelectric material. An algorithm to eliminate the effect of coupling in amplitude measurements, using individual Lamb modes excited/detected by the same transducer pair, is described. A multiple-impact test showing a decrease in amplitude and group velocity as damage progresses is used as an example.

Identification Problems in Personality Psychology1

PubMed Central

Borghans, Lex; Golsteyn, Bart H. H.; Heckman, James; Humphries, John Eric

2011-01-01

This paper discusses and illustrates identification problems in personality psychology. The measures used by psychologists to infer traits are based on behaviors, broadly defined. These behaviors are produced from multiple traits interacting with incentives in situations. In general, measures are determined by these multiple traits and do not identify any particular trait unless incentives and other traits are controlled for. Using two data sets, we show, as an example, that substantial portions of the variance in achievement test scores and grades, which are often used as measures of cognition, are explained by personality variables. PMID:21731170

Digitizing the ranges

NASA Astrophysics Data System (ADS)

Haddleton, Graham P.

2001-04-01

In military research and development or testing there are various fast and dangerous events that need to be recorded and analyzed. High-speed cameras allow the capture of movement too fast to be recognized by the human eye, and provide data that is essential for the analysis and evaluation of such events. High-speed photography is often the only type of instrumentation that can be used to record the parameters demanded by our customers. I will show examples where this applied cinematography is used not only to provide a visual record of events, but also as an essential measurement tool.

Water Pollution Detection by Reflectance Measurements

NASA Technical Reports Server (NTRS)

Goolsby, A. D.

1971-01-01

Measurement of the intensity of light reflected from various planar liquid surfaces has been performed. The results of this brief study show that the presence of a film of foreign material floating on a reference substrate is easily detected by reflectance measurement if the two liquids possess significantly different refractive indices, for example, oil (n = 1.40) and water (n = 1.33). Additional study of various optical configurations, and the building and testing of a prototype monitoring device revealed that the method is sufficiently practical for application to continuous water quality monitoring.

Way forward in case of a false positive in vitro genotoxicity result for a cosmetic substance?

PubMed

Doktorova, Tatyana Y; Ates, Gamze; Vinken, Mathieu; Vanhaecke, Tamara; Rogiers, Vera

2014-02-01

The currently used regulatory in vitro mutagenicity/genotoxicity test battery has a high sensitivity for detecting genotoxicants, but it suffers from a large number of irrelevant positive results (i.e. low specificity) thereby imposing the need for additional follow-up by in vitro and/or in vivo genotoxicity tests. This could have a major impact on the cosmetic industry in Europe, seen the imposed animal testing and marketing bans on cosmetics and their ingredients. Afflicted, but safe substances could therefore be lost. Using the example of triclosan, a cosmetic preservative, we describe here the potential applicability of a human toxicogenomics-based in vitro assay as a potential mechanistically based follow-up test for positive in vitro genotoxicity results. Triclosan shows a positive in vitro chromosomal aberration test, but is negative during in vivo follow-up tests. Toxicogenomics analysis unequivocally shows that triclosan is identified as a compound acting through non-DNA reactive mechanisms. This proof-of-principle study illustrates the potential of genome-wide transcriptomics data in combination with in vitro experimentation as a possible weight-of-evidence follow-up approach for de-risking a positive outcome in a standard mutagenicity/genotoxicity battery. As such a substantial number of cosmetic compounds wrongly identified as genotoxicants could be saved for the future. Copyright © 2013 Elsevier Ltd. All rights reserved.

Looking beyond the exome: a phenotype-first approach to molecular diagnostic resolution in rare and undiagnosed diseases.

PubMed

Pena, Loren D M; Jiang, Yong-Hui; Schoch, Kelly; Spillmann, Rebecca C; Walley, Nicole; Stong, Nicholas; Rapisardo Horn, Sarah; Sullivan, Jennifer A; McConkie-Rosell, Allyn; Kansagra, Sujay; Smith, Edward C; El-Dairi, Mays; Bellet, Jane; Keels, Martha Ann; Jasien, Joan; Kranz, Peter G; Noel, Richard; Nagaraj, Shashi K; Lark, Robert K; Wechsler, Daniel S G; Del Gaudio, Daniela; Leung, Marco L; Hendon, Laura G; Parker, Collette C; Jones, Kelly L; Goldstein, David B; Shashi, Vandana

2018-04-01

PurposeTo describe examples of missed pathogenic variants on whole-exome sequencing (WES) and the importance of deep phenotyping for further diagnostic testing.MethodsGuided by phenotypic information, three children with negative WES underwent targeted single-gene testing.ResultsIndividual 1 had a clinical diagnosis consistent with infantile systemic hyalinosis, although WES and a next-generation sequencing (NGS)-based ANTXR2 test were negative. Sanger sequencing of ANTXR2 revealed a homozygous single base pair insertion, previously missed by the WES variant caller software. Individual 2 had neurodevelopmental regression and cerebellar atrophy, with no diagnosis on WES. New clinical findings prompted Sanger sequencing and copy number testing of PLA2G6. A novel homozygous deletion of the noncoding exon 1 (not included in the WES capture kit) was detected, with extension into the promoter, confirming the clinical suspicion of infantile neuroaxonal dystrophy. Individual 3 had progressive ataxia, spasticity, and magnetic resonance image changes of vanishing white matter leukoencephalopathy. An NGS leukodystrophy gene panel and WES showed a heterozygous pathogenic variant in EIF2B5; no deletions/duplications were detected. Sanger sequencing of EIF2B5 showed a frameshift indel, probably missed owing to failure of alignment.ConclusionThese cases illustrate potential pitfalls of WES/NGS testing and the importance of phenotype-guided molecular testing in yielding diagnoses.

Looking beyond the exome: a phenotype-first approach to molecular diagnostic resolution in rare and undiagnosed diseases

PubMed Central

Pena, Loren DM; Jiang, Yong-Hui; Schoch, Kelly; Spillmann, Rebecca C.; Walley, Nicole; Stong, Nicholas; Horn, Sarah Rapisardo; Sullivan, Jennifer A.; McConkie-Rosell, Allyn; Kansagra, Sujay; Smith, Edward C.; El-Dairi, Mays; Bellet, Jane; Ann Keels, Martha; Jasien, Joan; Kranz, Peter G.; Noel, Richard; Nagaraj, Shashi K.; Lark, Robert K.; Wechsler, Daniel SG; del Gaudio, Daniela; Leung, Marco L.; Hendon, Laura G.; Parker, Collette C.; Jones, Kelly L.; Goldstein, David B.; Shashi, Vandana

2017-01-01

Purpose To describe examples of missed pathogenic variants on whole exome sequencing (WES) and the importance of deep phenotyping for further diagnostic testing. Methods Guided by phenotypic information, three children with negative WES underwent targeted single gene testing. Results Individual 1 had a clinical diagnosis consistent with infantile systemic hyalinosis, although WES and an NGS-based ANTXR2 test were negative. Sanger sequencing of ANTXR2 revealed a homozygous single base pair insertion, previously missed by the WES variant caller software. Individual 2 had neurodevelopmental regression and cerebellar atrophy, with no diagnosis on WES. New clinical findings prompted Sanger sequencing and copy number testing of PLA2G6. A novel homozygous deletion of the non-coding exon 1 (not included in the WES capture kit) was detected, with extension into the promoter, confirming the clinical suspicion of infantile neuroaxonal dystrophy. Individual 3 had progressive ataxia, spasticity and MRI changes of vanishing white matter leukoencephalopathy. An NGS leukodystrophy gene panel and WES showed a heterozygous pathogenic variant in EIF2B5; no deletions/duplications were detected. Sanger sequencing of EIF2B5 showed a frameshift indel, likely missed due to failure of alignment. Conclusions These cases illustrate potential pitfalls of WES/NGS testing, and the importance of phenotype-guided molecular testing in yielding diagnoses. PMID:28914269

Test Preparation: Your Role

MedlinePlus

... transport the sample from home to the lab. Examples of some common laboratory tests that require advance preparation include: Glucose tolerance, fasting, and two-hour post-prandial blood glucose tests : fasting or eating meals ...

Ethical dilemmas in genetic testing: examples from the Cuban program for predictive diagnosis of hereditary ataxias.

PubMed

Mariño, Tania Cruz; Armiñán, Rubén Reynaldo; Cedeño, Humberto Jorge; Mesa, José Miguel Laffita; Zaldivar, Yanetza González; Rodríguez, Raúl Aguilera; Santos, Miguel Velázquez; Mederos, Luis Enrique Almaguer; Herrera, Milena Paneque; Pérez, Luis Velázquez

2011-06-01

Predictive testing protocols are intended to help patients affected with hereditary conditions understand their condition and make informed reproductive choices. However, predictive protocols may expose clinicians and patients to ethical dilemmas that interfere with genetic counseling and the decision making process. This paper describes ethical dilemmas in a series of five cases involving predictive testing for hereditary ataxias in Cuba. The examples herein present evidence of the deeply controversial situations faced by both individuals at risk and professionals in charge of these predictive studies, suggesting a need for expanded guidelines to address such complexities.

78 FR 16311 - Self-Regulatory Organizations; Chicago Stock Exchange, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-14

... NBB.\\45\\ \\45\\ 17 CFR 242.201(b)(1)(iii)(A). Example 6. Assume now that another market center posts a...). Example 1. Assume that the NBBO for security XYZ is $10.10 x $10.12 and the short sale price test... be the result under either the current or proposed Post Only definition. Example 2. Assume the same...

Amniotic Fluid Analysis

MedlinePlus

... serious consequences for the developing fetus. A few examples include tests for: TORCH : toxoplasmosis, rubella, cytomegalovirus (CMV), herpes simplex virus (HSV) Parvovirus B19 Cultures for bacterial ... may be performed in select situations, for example, if a woman is very unsure of her ...

Precast, Prestressed Concrete Bent Caps : Volume 2, Design Recommendations and Design Examples

DOT National Transportation Integrated Search

2018-04-01

Recommendations for design of pretensioned bent caps are developed based on the findings of full-scale experimental tests of bent cap subassemblages. Companion examples are provided to demonstrate implementation of the design recommendations. First, ...

Exact Bayesian p-values for a test of independence in a 2 × 2 contingency table with missing data.

PubMed

Lin, Yan; Lipsitz, Stuart R; Sinha, Debajyoti; Fitzmaurice, Garrett; Lipshultz, Steven

2017-01-01

Altham (Altham PME. Exact Bayesian analysis of a 2 × 2 contingency table, and Fisher's "exact" significance test. J R Stat Soc B 1969; 31: 261-269) showed that a one-sided p-value from Fisher's exact test of independence in a 2 × 2 contingency table is equal to the posterior probability of negative association in the 2 × 2 contingency table under a Bayesian analysis using an improper prior. We derive an extension of Fisher's exact test p-value in the presence of missing data, assuming the missing data mechanism is ignorable (i.e., missing at random or completely at random). Further, we propose Bayesian p-values for a test of independence in a 2 × 2 contingency table with missing data using alternative priors; we also present results from a simulation study exploring the Type I error rate and power of the proposed exact test p-values. An example, using data on the association between blood pressure and a cardiac enzyme, is presented to illustrate the methods.

Development of a new seal for use on large openings of pressurized spacecraft

NASA Technical Reports Server (NTRS)

Weddendorf, B.

1994-01-01

The goal of this project was to design, build, and test an example of the seal invented by the author for use on Space Station Freedom and patented in 1991. The seal features a metallic spring core and replaceable elastomeric sealing elements. The metallic spring is designed to retain the sealing force of the elastomeric element against both sides of face seal gland for any specified amount of waviness or separation of the glands. A seal able to tolerate at least 1.3 mm (0.05 in) of flange distortion or separation and a test fixture of this seal which allowed direct comparison testing of O-rings were built. These designs were tested to compare leakage at different amounts of flange deflection. Results of the testing show the development seal exceeded its requirement to seal 1.3 mm of flange separation by 1 mm. This compared with the O-ring leakage, increasing dramatically at 0.5 mm of separation. The development seal also leaked at a lower rate than the O-ring seals in all tests.

Improvement of structural models using covariance analysis and nonlinear generalized least squares

NASA Technical Reports Server (NTRS)

Glaser, R. J.; Kuo, C. P.; Wada, B. K.

1992-01-01

The next generation of large, flexible space structures will be too light to support their own weight, requiring a system of structural supports for ground testing. The authors have proposed multiple boundary-condition testing (MBCT), using more than one support condition to reduce uncertainties associated with the supports. MBCT would revise the mass and stiffness matrix, analytically qualifying the structure for operation in space. The same procedure is applicable to other common test conditions, such as empty/loaded tanks and subsystem/system level tests. This paper examines three techniques for constructing the covariance matrix required by nonlinear generalized least squares (NGLS) to update structural models based on modal test data. The methods range from a complicated approach used to generate the simulation data (i.e., the correct answer) to a diagonal matrix based on only two constants. The results show that NGLS is very insensitive to assumptions about the covariance matrix, suggesting that a workable NGLS procedure is possible. The examples also indicate that the multiple boundary condition procedure more accurately reduces errors than individual boundary condition tests alone.

Examples in the Teaching of Mathematics: Teachers' Perceptions

ERIC Educational Resources Information Center

Ng, Lay Keow; Dindyal, Jaguthsing

2015-01-01

As part of a study examining how teachers in Singapore select and use examples for teaching mathematics, 121 teachers from 24 secondary schools responded to three open-ended questions about the use of examples in teaching. The results show that students' abilities and the difficulty level of the examples were among the topmost considerations…

A portable fracture toughness tester for biological materials

NASA Astrophysics Data System (ADS)

Darvell, B. W.; Lee, P. K. D.; Yuen, T. D. B.; Lucas, P. W.

1996-06-01

A portable mechanical tester is described which is both lightweight and cheap to produce. The machine is simple and convenient to operate and requires only a minimum of personnel training. It can be used to measure the fundamental mechanical properties of pliant solids, particularly toughness (in the sense of `work of fracture') using either scissors or wedge tests. This is achieved through a novel hardware integration technique. The circuits are described. The use of the machine does not require a chart recorder but it can be linked to a personal computer, either to show force - displacement relationships or for data storage. The design allows the use of any relatively `soft' mechanical test, i.e. tests in which the deformability of the frame of the machine and its load cell do not introduce significant errors into the results. Examples of its use in measuring the toughness of biomaterials by scissors (paper, wood) and wedges (mung bean starch gels) are given.

Optimized auxiliary basis sets for density fitted post-Hartree-Fock calculations of lanthanide containing molecules

NASA Astrophysics Data System (ADS)

Chmela, Jiří; Harding, Michael E.

2018-06-01

Optimised auxiliary basis sets for lanthanide atoms (Ce to Lu) for four basis sets of the Karlsruhe error-balanced segmented contracted def2 - series (SVP, TZVP, TZVPP and QZVPP) are reported. These auxiliary basis sets enable the use of the resolution-of-the-identity (RI) approximation in post Hartree-Fock methods - as for example, second-order perturbation theory (MP2) and coupled cluster (CC) theory. The auxiliary basis sets are tested on an enlarged set of about a hundred molecules where the test criterion is the size of the RI error in MP2 calculations. Our tests also show that the same auxiliary basis sets can be used together with different effective core potentials. With these auxiliary basis set calculations of MP2 and CC quality can now be performed efficiently on medium-sized molecules containing lanthanides.

Approaching Free Fall on Two Degrees of Freedom: Simultaneous Measurement of Residual Force and Torque on a Double Torsion Pendulum.

PubMed

Bassan, M; Cavalleri, A; De Laurentis, M; De Marchi, F; De Rosa, R; Di Fiore, L; Dolesi, R; Finetti, N; Garufi, F; Grado, A; Hueller, M; Marconi, L; Milano, L; Pucacco, G; Stanga, R; Visco, M; Vitale, S; Weber, W J

2016-02-05

A torsion pendulum with 2 soft degrees of freedom (DOFs), realized by off-axis cascading two torsion fibers, has been built and operated. This instrument helps characterize the geodesic motion of a test mass for LISA Pathfinder or any other free-fall space mission, providing information on cross talk and other effects that cannot be detected when monitoring a single DOF. We show that it is possible to simultaneously measure both the residual force and the residual torque acting on a quasifree test mass. As an example of the investigations that a double pendulum allows, we report the measurement of the force-to-torque cross talk, i.e., the amount of actuation signal, produced by applying a force on the suspended test mass, that leaks into the rotational DOF, detected by measuring the corresponding (unwanted) torque.

German Ethics Council on genetic diagnostics: trend setting?

PubMed

Buechner, Bianca

2014-06-01

On 30 April 2013, the German Ethics Council ('Council') published its opinion on 'The future of genetic diagnostics--from research to clinical application' ('the Opinion'). The Council was asked by the German government to discuss the future of genetic diagnostic methods in relation to the current applicable laws and regulations as well as the ethical stand points. The Council's 23 recommendations show that the existing regulations in Germany, and indirectly on a European level, lack in protecting consumers sufficiently. Consumer protection built the major focus of the Council's opinion. However, the opinion misses a critical overall analysis of genetic testing and, for example, the potential misuse of genetic test results by insures or the risk of disclosure toward employers. The Council missed an opportunity to discuss which barriers are necessary from a legal and ethical perspective but which still do not prohibit genetic testing and research.

An assessment of the Nguyen and Pinder method for slug test analysis. [In situ estimates of ground water contamination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, J.J. Jr.; Hyder, Z.

The Nguyen and Pinder method is one of four techniques commonly used for analysis of response data from slug tests. Limited field research has raised questions about the reliability of the parameter estimates obtained with this method. A theoretical evaluation of this technique reveals that errors were made in the derivation of the analytical solution upon which the technique is based. Simulation and field examples show that the errors result in parameter estimates that can differ from actual values by orders of magnitude. These findings indicate that the Nguyen and Pinder method should no longer be a tool in themore » repertoire of the field hydrogeologist. If data from a slug test performed in a partially penetrating well in a confined aquifer need to be analyzed, recent work has shown that the Hvorslev method is the best alternative among the commonly used techniques.« less

Mirror self-recognition: a review and critique of attempts to promote and engineer self-recognition in primates.

PubMed

Anderson, James R; Gallup, Gordon G

2015-10-01

We review research on reactions to mirrors and self-recognition in nonhuman primates, focusing on methodological issues. Starting with the initial demonstration in chimpanzees in 1970 and subsequent attempts to extend this to other species, self-recognition in great apes is discussed with emphasis on spontaneous manifestations of mirror-guided self-exploration as well as spontaneous use of the mirror to investigate foreign marks on otherwise nonvisible body parts-the mark test. Attempts to show self-recognition in other primates are examined with particular reference to the lack of convincing examples of spontaneous mirror-guided self-exploration, and efforts to engineer positive mark test responses by modifying the test or using conditioning techniques. Despite intensive efforts to demonstrate self-recognition in other primates, we conclude that to date there is no compelling evidence that prosimians, monkeys, or lesser apes-gibbons and siamangs-are capable of mirror self-recognition.

Identifying fMRI Model Violations with Lagrange Multiplier Tests

PubMed Central

Cassidy, Ben; Long, Christopher J; Rae, Caroline; Solo, Victor

2013-01-01

The standard modeling framework in Functional Magnetic Resonance Imaging (fMRI) is predicated on assumptions of linearity, time invariance and stationarity. These assumptions are rarely checked because doing so requires specialised software, although failure to do so can lead to bias and mistaken inference. Identifying model violations is an essential but largely neglected step in standard fMRI data analysis. Using Lagrange Multiplier testing methods we have developed simple and efficient procedures for detecting model violations such as non-linearity, non-stationarity and validity of the common Double Gamma specification for hemodynamic response. These procedures are computationally cheap and can easily be added to a conventional analysis. The test statistic is calculated at each voxel and displayed as a spatial anomaly map which shows regions where a model is violated. The methodology is illustrated with a large number of real data examples. PMID:22542665

Aerogel Insulation Applications for Liquid Hydrogen Launch Vehicle Tanks

NASA Technical Reports Server (NTRS)

Fesmire, J. E.; Sass, J.

2007-01-01

Aerogel based insulation systems for ambient pressure environments were developed for liquid hydrogen (LH2) tank applications. Solutions to thermal insulation problems were demonstrated for the Space Shuttle External Tank (ET) through extensive testing at the Cryogenics Test Laboratory. Demonstration testing was performed using a 1/10th scale ET LH2 intertank unit and liquid helium as the coolant to provide the 20 K cold boundary temperature. Cryopumping tests in the range of 20K were performed using both constant mass and constant pressure methods. Long-duration tests (up to 10 hours) showed that the nitrogen mass taken up inside the intertank is reduced by a factor of nearly three for the aerogel insulated case as compared to the un-insulated (bare metal flight configuration) case. Test results including thermal stabilization, heat transfer effectiveness, and cryopumping confirm that the aerogel system eliminates free liquid nitrogen within the intertank. Physisorption (or adsorption) of liquid nitrogen within the fine pore structure of aerogel materials was also investigated. Results of a mass uptake method show that the sorption ratio (liquid nitrogen to aerogel beads) is about 62 percent by volume. A novel liquid nitrogen production method of testing the liquid nitrogen physical adsorption capacity of aerogel beads was also performed to more closely approximate the actual launch vehicle cooldown and thermal stabilization effects within the aerogel material. The extraordinary insulating effectiveness of the aerogel material shows that cryopumping is not an open-cell mass transport issue but is strictly driven by thermal communication between warm and cold surfaces. The new aerogel insulation technology is useful to solve heat transfer problem areas and to augment existing thermal protection systems on launch vehicles. Examples are given and potential benefits for producing launch systems that are more reliable, robust, reusable, and efficient are outlined.

Management of Electronic Test Equipment. Volume 3. Organizations, Policies, and Procedures.

DTIC Science & Technology

1986-07-01

is not guaranteed. The best example, probably, is the UH - 60 Black Hawk program, where the specific tools used by organizational maintainers were nailed...tools. This innovative and highly effective approach was large!i, Successful. even though it became obvious once the UH - 60 was fielded, that a special...test set was necessary to cope with the electronic control unit assembly of the turbine engine. The UH - 60 example, however, does illustrate that support

pFUnit 3.0 Tutorial Advanced

NASA Technical Reports Server (NTRS)

Clune, Tom

2014-01-01

This tutorial will introduce Fortran developers to unit-testing and test-driven development (TDD) using pFUnit. As with other unit-testing frameworks, pFUnit, simplifies the process of writing, collecting, and executing tests while providing clear diagnostic messages for failing tests. pFUnit specifically targets the development of scientific-technical software written in Fortran and includes customized features such as: assertions for multi-dimensional arrays, distributed (MPI) and thread-based (OpenMP) parallellism, and flexible parameterized tests.These sessions will include numerous examples and hands-on exercises that gradually build in complexity. Attendees are expected to have working knowledge of F90, but familiarity with object-oriented syntax in F2003 and MPI will be of benefit for the more advanced examples. By the end of the tutorial the audience should feel comfortable in applying pFUnit within their own development environment.

[The methodological assessment and qualitative evaluation of psychometric performance tests based on the example of modern tests that assess reading and spelling skills].

PubMed

Galuschka, Katharina; Rothe, Josefine; Schulte-Körne, Gerd

2015-09-01

This article looks at a means of objectively evaluating the quality of psychometric tests. This approach enables users to evaluate psychometric tests based on their methodological characteristics, in order to decide which instrument should be used. Reading and spelling assessment tools serve as examples. The paper also provides a review of German psychometric tests for the assessment of reading and spelling skills. This method facilitates the identification of psychometric tests.of high methodological quality which can be used for the assessment of reading and spelling skills. Reading performance should ideally be assessed with the following instruments: ELFE 1-6, LGVT 6-12, LESEN 6-7, LESEN 8-9, or WLLP-R. The tests to be used for the evaluation of spelling skills are DERET 1-2+, DERET 3-4+, WRT 1+, WRT 2+, WRT 3+, WRT 4+ or HSP 1-10.

Permutation-based inference for the AUC: A unified approach for continuous and discontinuous data.

PubMed

Pauly, Markus; Asendorf, Thomas; Konietschke, Frank

2016-11-01

We investigate rank-based studentized permutation methods for the nonparametric Behrens-Fisher problem, that is, inference methods for the area under the ROC curve. We hereby prove that the studentized permutation distribution of the Brunner-Munzel rank statistic is asymptotically standard normal, even under the alternative. Thus, incidentally providing the hitherto missing theoretical foundation for the Neubert and Brunner studentized permutation test. In particular, we do not only show its consistency, but also that confidence intervals for the underlying treatment effects can be computed by inverting this permutation test. In addition, we derive permutation-based range-preserving confidence intervals. Extensive simulation studies show that the permutation-based confidence intervals appear to maintain the preassigned coverage probability quite accurately (even for rather small sample sizes). For a convenient application of the proposed methods, a freely available software package for the statistical software R has been developed. A real data example illustrates the application. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Triple electrical channels on a triple fluid swivel and its use to monitor intracranial temperature with a thermocouple.

PubMed

Parada, M A; Puig de Parada, M; Hernandez, L; Hoebel, B G

1995-08-01

A low-torque, bubble-free and multiple-channel fluid swivel of easy construction was recently described. This paper describes the design, construction and testing of 3 electrical channels added to the original fluid swivel. The new channels were tested monitoring intrahypothalamic temperature (T(hy)) by means of a copper-constantan thermocouple in freely moving rats, before and after a single intraperitoneal (i.p.) amphetamine injection (3 mg/kg). This test showed an increase in T(hy) after the injection and the maintenance of the electrical continuity along the whole testing period, even when the animals were hyperactive. With this improvement the original swivel was transformed in a more versatile device for experiments requiring fluid handlings and electrophysiological manipulations. Electrical stimulation as in kindling or brain self-stimulation, and electrophysiological recordings as in electroencephalography, electromiography, electrocardiography, in vivo voltammetry and even neuronal unit recording, are just examples of the electrophysiological methods that can be combined with drug self-administration and microdialysis using the present device.

Migration of fluorochemical paper additives from food-contact paper into foods and food simulants.

PubMed

Begley, T H; Hsu, W; Noonan, G; Diachenko, G

2008-03-01

Fluorochemical-treated paper was tested to determine the amount of migration that occurs into foods and food-simulating liquids and the characteristics of the migration. Migration characteristics of fluorochemicals from paper were examined in Miglyol, butter, water, vinegar, water-ethanol solutions, emulsions and pure oil containing small amounts of emulsifiers. Additionally, microwave popcorn and chocolate spread were used to investigate migration. Results indicate that fluorochemicals paper additives do migrate to food during actual package use. For example, we found that microwave popcorn contained 3.2 fluorochemical mg kg(-1) popcorn after popping and butter contained 0.1 mg kg(-1) after 40 days at 4 degrees C. Tests also indicate that common food-simulating liquids for migration testing and package material evaluation might not provide an accurate indication of the amount of fluorochemical that actually migrates to food. Tests show that oil containing small amounts of an emulsifier can significantly enhance migration of a fluorochemical from paper.

Ares-I-X Stability and Control Flight Test: Analysis and Plans

NASA Technical Reports Server (NTRS)

Brandon, Jay M.; Derry, Stephen D.; Heim, Eugene H.; Hueschen, Richard M.; Bacon, Barton J.

2008-01-01

The flight test of the Ares I-X vehicle provides a unique opportunity to reduce risk of the design of the Ares I vehicle and test out design, math modeling, and analysis methods. One of the key features of the Ares I design is the significant static aerodynamic instability coupled with the relatively flexible vehicle - potentially resulting in a challenging controls problem to provide adequate flight path performance while also providing adequate structural mode damping and preventing adverse control coupling to the flexible structural modes. Another challenge is to obtain enough data from the single flight to be able to conduct analysis showing the effectiveness of the controls solutions and have data to inform design decisions for Ares I. This paper will outline the modeling approaches and control system design to conduct this flight test, and also the system identification techniques developed to extract key information such as control system performance (gain/phase margins, for example), structural dynamics responses, and aerodynamic model estimations.

Next Generation Car — Example of Function Integration at the Light Urban Vehicle (LUV) Vehicle Concept

NASA Astrophysics Data System (ADS)

Kopp, G.; Brückmann, S.; Kriescher, M.; Friedrich, H. E.

In times of climate change vehicle emissions have to be reduced clearly. One possibility is to reduce the mass of the body in white using lightweight sandwich structures. The department `Lightweight and Hybrid Design Methods' of the Institute of Vehicle Concepts develops a vehicle body structure by using sandwiches with aluminum top layers and polyurethane foam as core material. For that the foam and the sandwiches were investigated under different load cases, e.g. pressure loading and in-plane tests. In tests with components the high potential of the sandwich materials were shown. On the dynamic component test facility of the institute, vehicle front structures were tested successfully. The results of all investigations regarding sandwich materials, integration of functions (e.g. crash, thermal) in vehicle structures and the concept LUV are developed under the research program of Next Generation Car of the DLR. We will show the development and results of the LUV.

Euthyroid ''thyroxine toxicosis''

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mankikar, G.D.; Clark, A.N.

A survey was made of thyroid function tests on 1,153 patients screened for thyroid disease during a two-year period in a Geriatric Department; 13 percent of the test results fell outside the normal range. Of 88 patients who showed above-normal results, only 12 presented with clinical features of thyrotoxicosis. In 37 patients, the biochemical findings indicated euthyroid ''thyroxine toxicosis''; high values were found for serum thyroxine (T4) and the free thyroxine index (FT4I) but there were no clinical signs or symptoms of thyrotoxicosis; the values reverted to normal within one to three weeks. This pattern was seen also in 7more » examples of T4-treated hypothyroidism. (Overall, the test findings indicated 61 cases of hypothyroidism.) The significance of this transient increase in T4 and FT4I values is discussed. The false positive results suggest that, when laboratory findings are not compatible with the clinical signs, the thyroid function tests should be repeated after another two weeks.« less

Enter the reverend: introduction to and application of Bayes' theorem in clinical ophthalmology.

PubMed

Thomas, Ravi; Mengersen, Kerrie; Parikh, Rajul S; Walland, Mark J; Muliyil, Jayprakash

2011-12-01

Ophthalmic practice utilizes numerous diagnostic tests, some of which are used to screen for disease. Interpretation of test results and many clinical management issues are actually problems in inverse probability that can be solved using Bayes' theorem. Use two-by-two tables to understand Bayes' theorem and apply it to clinical examples. Specific examples of the utility of Bayes' theorem in diagnosis and management. Two-by-two tables are used to introduce concepts and understand the theorem. The application in interpretation of diagnostic tests is explained. Clinical examples demonstrate its potential use in making management decisions. Positive predictive value and conditional probability. The theorem demonstrates the futility of testing when prior probability of disease is low. Application to untreated ocular hypertension demonstrates that the estimate of glaucomatous optic neuropathy is similar to that obtained from the Ocular Hypertension Treatment Study. Similar calculations are used to predict the risk of acute angle closure in a primary angle closure suspect, the risk of pupillary block in a diabetic undergoing cataract surgery, and the probability that an observed decrease in intraocular pressure is due to the medication that has been started. The examples demonstrate how data required for management can at times be easily obtained from available information. Knowledge of Bayes' theorem helps in interpreting test results and supports the clinical teaching that testing for conditions with a low prevalence has a poor predictive value. In some clinical situations Bayes' theorem can be used to calculate vital data required for patient management. © 2011 The Authors. Clinical and Experimental Ophthalmology © 2011 Royal Australian and New Zealand College of Ophthalmologists.

A modular, prospective, semi-automated drug safety monitoring system for use in a distributed data environment.

PubMed

Gagne, Joshua J; Wang, Shirley V; Rassen, Jeremy A; Schneeweiss, Sebastian

2014-06-01

The aim of this study was to develop and test a semi-automated process for conducting routine active safety monitoring for new drugs in a network of electronic healthcare databases. We built a modular program that semi-automatically performs cohort identification, confounding adjustment, diagnostic checks, aggregation and effect estimation across multiple databases, and application of a sequential alerting algorithm. During beta-testing, we applied the system to five databases to evaluate nine examples emulating prospective monitoring with retrospective data (five pairs for which we expected signals, two negative controls, and two examples for which it was uncertain whether a signal would be expected): cerivastatin versus atorvastatin and rhabdomyolysis; paroxetine versus tricyclic antidepressants and gastrointestinal bleed; lisinopril versus angiotensin receptor blockers and angioedema; ciprofloxacin versus macrolide antibiotics and Achilles tendon rupture; rofecoxib versus non-selective non-steroidal anti-inflammatory drugs (ns-NSAIDs) and myocardial infarction; telithromycin versus azithromycin and hepatotoxicity; rosuvastatin versus atorvastatin and diabetes and rhabdomyolysis; and celecoxib versus ns-NSAIDs and myocardial infarction. We describe the program, the necessary inputs, and the assumed data environment. In beta-testing, the system generated four alerts, all among positive control examples (i.e., lisinopril and angioedema; rofecoxib and myocardial infarction; ciprofloxacin and tendon rupture; and cerivastatin and rhabdomyolysis). Sequential effect estimates for each example were consistent in direction and magnitude with existing literature. Beta-testing across nine drug-outcome examples demonstrated the feasibility of the proposed semi-automated prospective monitoring approach. In retrospective assessments, the system identified an increased risk of myocardial infarction with rofecoxib and an increased risk of rhabdomyolysis with cerivastatin years before these drugs were withdrawn from the market. Copyright © 2014 John Wiley & Sons, Ltd.

Platinum metallization for MEMS application

PubMed Central

Guarnieri, Vittorio; Biazi, Leonardo; Marchiori, Roberto; Lago, Alexandre

2014-01-01

The adherence of Platinum thin film on Si/SiO2 wafer was studies using Chromium, Titanium or Alumina (Cr, Ti, Al2O3) as interlayer. The adhesion of Pt is a fundamental property in different areas, for example in MEMS devices, which operate at high temperature conditions, as well as in biomedical applications, where the problem of adhesion of a Pt film to the substrate is known as a major challenge in several industrial applications health and in biomedical devices, such as for example in the stents.1-4 We investigated the properties of Chromium, Titanium, and Alumina (Cr, Ti, and Al2O3) used as adhesion layers of Platinum (Pt) electrode. Thin films of Chromium, Titanium and Alumina were deposited on Silicon/Silicon dioxide (Si/SiO2) wafer by electron beam. We introduced Al2O3 as a new adhesion layer to test the behavior of the Pt film at higher temperature using a ceramic adhesion thin film. Electric behaviors were measured for different annealing temperatures to know the performance for Cr/Pt, Ti/Pt, and Al2O3/Pt metallic film in the gas sensor application. All these metal layers showed a good adhesion onto Si/SiO2 and also good Au wire bondability at room temperature, but for higher temperature than 400 °C the thin Cr/Pt and Ti/Pt films showed poor adhesion due to the atomic inter-diffusion between Platinum and the metal adhesion layers.5 The proposed Al2O3/Pt ceramic-metal layers confirmed a better adherence for the higher temperatures tested. PMID:24743057

Response to clozapine in a clinically identifiable subtype of schizophrenia

PubMed Central

Butcher, Nancy J.; Fung, Wai Lun Alan; Fitzpatrick, Laura; Guna, Alina; Andrade, Danielle M.; Lang, Anthony E.; Chow, Eva W. C.; Bassett, Anne S.

2015-01-01

Background Genetic testing in psychiatry promises to improve patient care through advances in personalised medicine. However, there are few clinically relevant examples. Aims To determine whether patients with a well-established genetic subtype of schizophrenia show a different response profile to the antipsychotic clozapine than those with idiopathic schizophrenia. Method We retrospectively studied the long-term safety and efficacy of clozapine in 40 adults with schizophrenia, half with a 22q11.2 deletion (22q11.2DS group) and half matched for age and clinical severity but molecularly confirmed to have no pathogenic copy number variant (idiopathic group). Results Both groups showed similar clinical improvement and significant reductions in hospitalisations, achieved at a lower median dose for those in the 22q11.2DS group. Most common side-effects were similarly prevalent between the two groups, however, half of the 22q11.2DS group experienced at least one rare serious adverse event compared with none of the idiopathic group. Many were successfully retried on clozapine. Conclusions Individuals with 22q11.2DS-schizophrenia respond as well to clozapine treatment as those with other forms of schizophrenia, but may represent a disproportionate number of those with serious adverse events, primarily seizures. Lower doses and prophylactic (for example anticonvulsant) management strategies can help ameliorate side-effect risks. This first systematic evaluation of antipsychotic response in a genetic subtype of schizophrenia provides a proof-of-principle for personalised medicine and supports the utility of clinical genetic testing in schizophrenia. PMID:25745132

Potential Identification of Sublimation-Driven Downslope Mass Movement on Mercury

NASA Astrophysics Data System (ADS)

Malliband, C. C.; Conway, S. J.; Rothery, D. A.; Balme, M. R.

2018-05-01

We have identified a further example of mass movement, in addition to the previously identified example in the pyroclastic vent NE of Rachmaninoff. Both examples show evidence of hollow sublimation being a cause of the mass movements.

Be a Healthy Role Model for Children: 10 Tips for Setting Good Examples

MedlinePlus

... model for children 10 tips for setting good examples You are the most important influence on your ... make mealtime a family time! 1 show by example Eat vegetables, fruits, and whole grains with meals ...

Gauge covariance of the fermion Schwinger–Dyson equation in QED

DOE PAGES

Jia, Shaoyang; Pennington, Michael R.

2017-03-27

Any practical application of the Schwinger–Dyson equations to the study of n-point Green's functions in a strong coupling field theory requires truncations. In the case of QED, the gauge covariance, governed by the Landau–Khalatnikov–Fradkin transformations (LKFT), provides a unique constraint on such truncation. Here, by using a spectral representation for the massive fermion propagator in QED, we are able to show that the constraints imposed by the LKFT are linear operations on the spectral densities. We formally define these group operations and show with a couple of examples how in practice they provide a straightforward way to test the gaugemore » covariance of any viable truncation of the Schwinger–Dyson equation for the fermion 2-point function.« less

Logic analysis of complex systems by characterizing failure phenomena to achieve diagnosis and fault-isolation

NASA Technical Reports Server (NTRS)

Wong, J. T.; Andre, W. L.

1981-01-01

A recent result shows that, for a certain class of systems, the interdependency among the elements of such a system together with the elements constitutes a mathematical structure a partially ordered set. It is called a loop free logic model of the system. On the basis of an intrinsic property of the mathematical structure, a characterization of system component failure in terms of maximal subsets of bad test signals of the system was obtained. Also, as a consequence, information concerning the total number of failure components in the system was deduced. Detailed examples are given to show how to restructure real systems containing loops into loop free models for which the result is applicable.

Health Topic XML File Description

MedlinePlus

... description (200 characters maximum) summarizing the page content Example: meta-desc="If you are being tested for Type 2 diabetes, your doctor gives you an A1C test. The test is also used to monitor your ...

Chemical Safety Assessment Using Read-Across: Assessing the Use of Novel Testing Methods to Strengthen the Evidence Base for Decision Making.

PubMed

Berggren, Elisabet; Amcoff, Patric; Benigni, Romualdo; Blackburn, Karen; Carney, Edward; Cronin, Mark; Deluyker, Hubert; Gautier, Francoise; Judson, Richard S; Kass, Georges E N; Keller, Detlef; Knight, Derek; Lilienblum, Werner; Mahony, Catherine; Rusyn, Ivan; Schultz, Terry; Schwarz, Michael; Schüürmann, Gerrit; White, Andrew; Burton, Julien; Lostia, Alfonso M; Munn, Sharon; Worth, Andrew

2015-12-01

Safety assessment for repeated dose toxicity is one of the largest challenges in the process to replace animal testing. This is also one of the proof of concept ambitions of SEURAT-1, the largest ever European Union research initiative on alternative testing, co-funded by the European Commission and Cosmetics Europe. This review is based on the discussion and outcome of a workshop organized on initiative of the SEURAT-1 consortium joined by a group of international experts with complementary knowledge to further develop traditional read-across and include new approach data. The aim of the suggested strategy for chemical read-across is to show how a traditional read-across based on structural similarities between source and target substance can be strengthened with additional evidence from new approach data--for example, information from in vitro molecular screening, "-omics" assays and computational models--to reach regulatory acceptance. We identified four read-across scenarios that cover typical human health assessment situations. For each such decision context, we suggested several chemical groups as examples to prove when read-across between group members is possible, considering both chemical and biological similarities. We agreed to carry out the complete read-across exercise for at least one chemical category per read-across scenario in the context of SEURAT-1, and the results of this exercise will be completed and presented by the end of the research initiative in December 2015.

Testing the Causal Direction of Mediation Effects in Randomized Intervention Studies.

PubMed

Wiedermann, Wolfgang; Li, Xintong; von Eye, Alexander

2018-05-21

In a recent update of the standards for evidence in research on prevention interventions, the Society of Prevention Research emphasizes the importance of evaluating and testing the causal mechanism through which an intervention is expected to have an effect on an outcome. Mediation analysis is commonly applied to study such causal processes. However, these analytic tools are limited in their potential to fully understand the role of theorized mediators. For example, in a design where the treatment x is randomized and the mediator (m) and the outcome (y) are measured cross-sectionally, the causal direction of the hypothesized mediator-outcome relation is not uniquely identified. That is, both mediation models, x → m → y or x → y → m, may be plausible candidates to describe the underlying intervention theory. As a third explanation, unobserved confounders can still be responsible for the mediator-outcome association. The present study introduces principles of direction dependence which can be used to empirically evaluate these competing explanatory theories. We show that, under certain conditions, third higher moments of variables (i.e., skewness and co-skewness) can be used to uniquely identify the direction of a mediator-outcome relation. Significance procedures compatible with direction dependence are introduced and results of a simulation study are reported that demonstrate the performance of the tests. An empirical example is given for illustrative purposes and a software implementation of the proposed method is provided in SPSS.

Relevant, irredundant feature selection and noisy example elimination.

PubMed

Lashkia, George V; Anthony, Laurence

2004-04-01

In many real-world situations, the method for computing the desired output from a set of inputs is unknown. One strategy for solving these types of problems is to learn the input-output functionality from examples in a training set. However, in many situations it is difficult to know what information is relevant to the task at hand. Subsequently, researchers have investigated ways to deal with the so-called problem of consistency of attributes, i.e., attributes that can distinguish examples from different classes. In this paper, we first prove that the notion of relevance of attributes is directly related to the consistency of attributes, and show how relevant, irredundant attributes can be selected. We then compare different relevant attribute selection algorithms, and show the superiority of algorithms that select irredundant attributes over those that select relevant attributes. We also show that searching for an "optimal" subset of attributes, which is considered to be the main purpose of attribute selection, is not the best way to improve the accuracy of classifiers. Employing sets of relevant, irredundant attributes improves classification accuracy in many more cases. Finally, we propose a new method for selecting relevant examples, which is based on filtering the so-called pattern frequency domain. By identifying examples that are nontypical in the determination of relevant, irredundant attributes, irrelevant examples can be eliminated prior to the learning process. Empirical results using artificial and real databases show the effectiveness of the proposed method in selecting relevant examples leading to improved performance even on greatly reduced training sets.

Assessing cross-cultural differences through use of multiple-group invariance analyses.

PubMed

Stein, Judith A; Lee, Jerry W; Jones, Patricia S

2006-12-01

The use of structural equation modeling in cross-cultural personality research has become a popular method for testing measurement invariance. In this report, we present an example of testing measurement invariance using the Sense of Coherence Scale of Antonovsky (1993) in 3 ethnic groups: Chinese, Japanese, and Whites. In a series of increasingly restrictive constraints on the measurement models of the 3 groups, we demonstrate how to assess differences among the groups. We also provide an example of construct validation.

SQUIDs: microscopes and nondestructive evaluation

NASA Astrophysics Data System (ADS)

Mück, Michael

2005-03-01

SQUIDs (Superconducting Quantum Interference Devices) are magnetic field sensores with unsurpassed sensitivity. They are amazingly versatile, being able to measure all physical quantities which can be converted to magnetic flux. They are routinely fabricated in thin film technology from two classes of superconducting materials: high-temperature superconductors (HTS) which are usually cooled to 77 K, and low-temperature superconductors (LTS), which have to be cooled to 4.2 K. SQUIDs have many applications, two of which shall be discussed in this paper. In SQUID microscopy, a SQUID scans a sample, which preferrably is at room temperature, and measures the two-dimensional magnetic field distribution at the surface of the sample. In order to achieve a relatively high spatial resolution, the stand-off distance between the sample and the SQUID is made as small as possible. SQUIDs show also promising results in the field of nondestructive testing of various materials. For example, ferromagnetic impurities in stainless steel formed by aging processes in the material can be detected with high probability, and cracks in conducting materials, for example aircraft parts, can be located using eddy current methods. Especially for the case of thick, highly conductive, or ferromagnetic materials, as well as sintered materials, it can be shown that a SQUID-based NDE system exhibits a much higher sensitivity compared to conventional eddy current NDE and ultrasonic testing.

A new free and open source tool for space plasma modeling.

NASA Astrophysics Data System (ADS)

Honkonen, I. J.

2014-12-01

I will present a new distributed memory parallel, free and open source computational model for studying space plasma. The model is written in C++ with emphasis on good software development practices and code readability without sacrificing serial or parallel performance. As such the model could be especially useful for education, for learning both (magneto)hydrodynamics (MHD) and computational model development. By using latest features of the C++ standard (2011) it has been possible to develop a very modular program which improves not only the readability of code but also the testability of the model and decreases the effort required to make changes to various parts of the program. Major parts of the model, functionality not directly related to (M)HD, have been outsourced to other freely available libraries which has reduced the development time of the model significantly. I will present an overview of the code architecture as well as details of different parts of the model and will show examples of using the model including preparing input files and plotting results. A multitude of 1-, 2- and 3-dimensional test cases are included in the software distribution and the results of, for example, Kelvin-Helmholtz, bow shock, blast wave and reconnection tests, will be presented.

An introduction to modeling longitudinal data with generalized additive models: applications to single-case designs.

PubMed

Sullivan, Kristynn J; Shadish, William R; Steiner, Peter M

2015-03-01

Single-case designs (SCDs) are short time series that assess intervention effects by measuring units repeatedly over time in both the presence and absence of treatment. This article introduces a statistical technique for analyzing SCD data that has not been much used in psychological and educational research: generalized additive models (GAMs). In parametric regression, the researcher must choose a functional form to impose on the data, for example, that trend over time is linear. GAMs reverse this process by letting the data inform the choice of functional form. In this article we review the problem that trend poses in SCDs, discuss how current SCD analytic methods approach trend, describe GAMs as a possible solution, suggest a GAM model testing procedure for examining the presence of trend in SCDs, present a small simulation to show the statistical properties of GAMs, and illustrate the procedure on 3 examples of different lengths. Results suggest that GAMs may be very useful both as a form of sensitivity analysis for checking the plausibility of assumptions about trend and as a primary data analysis strategy for testing treatment effects. We conclude with a discussion of some problems with GAMs and some future directions for research on the application of GAMs to SCDs. (c) 2015 APA, all rights reserved).

Algorithms for the detection of chewing behavior in dietary monitoring applications

NASA Astrophysics Data System (ADS)

Schmalz, Mark S.; Helal, Abdelsalam; Mendez-Vasquez, Andres

2009-08-01

The detection of food consumption is key to the implementation of successful behavior modification in support of dietary monitoring and therapy, for example, during the course of controlling obesity, diabetes, or cardiovascular disease. Since the vast majority of humans consume food via mastication (chewing), we have designed an algorithm that automatically detects chewing behaviors in surveillance video of a person eating. Our algorithm first detects the mouth region, then computes the spatiotemporal frequency spectrum of a small perioral region (including the mouth). Spectral data are analyzed to determine the presence of periodic motion that characterizes chewing. A classifier is then applied to discriminate different types of chewing behaviors. Our algorithm was tested on seven volunteers, whose behaviors included chewing with mouth open, chewing with mouth closed, talking, static face presentation (control case), and moving face presentation. Early test results show that the chewing behaviors induce a temporal frequency peak at 0.5Hz to 2.5Hz, which is readily detected using a distance-based classifier. Computational cost is analyzed for implementation on embedded processing nodes, for example, in a healthcare sensor network. Complexity analysis emphasizes the relationship between the work and space estimates of the algorithm, and its estimated error. It is shown that chewing detection is possible within a computationally efficient, accurate, and subject-independent framework.

Data Characterization Using Artificial-Star Tests: Performance Evaluation

NASA Astrophysics Data System (ADS)

Hu, Yi; Deng, Licai; de Grijs, Richard; Liu, Qiang

2011-01-01

Traditional artificial-star tests are widely applied to photometry in crowded stellar fields. However, to obtain reliable binary fractions (and their uncertainties) of remote, dense, and rich star clusters, one needs to recover huge numbers of artificial stars. Hence, this will consume much computation time for data reduction of the images to which the artificial stars must be added. In this article, we present a new method applicable to data sets characterized by stable, well-defined, point-spread functions, in which we add artificial stars to the retrieved-data catalog instead of to the raw images. Taking the young Large Magellanic Cloud cluster NGC 1818 as an example, we compare results from both methods and show that they are equivalent, while our new method saves significant computational time.

An Improved Cochlea Model with a General User Interface

NASA Astrophysics Data System (ADS)

Duifhuis, H.; Kruseman, J. M.; van Hengel, P. W. J.

2003-02-01

We have developed a flexible 1D cochlea model to test hypotheses and data against physical and mathematical constraints. The model is flexible in the sense that several linear and nonlinear model characteristics can be selected, and different boundary conditions can be tested. The software model runs at a reasonable speed at a modern PC. As an example, we will show the results of the model in comparison with the systematic study of the phase behavior (group delay) of distortion product otoacoustic emissions (DPOAEs) in the guinea pig (S. Schneider, V. Prijs and R. Schoonhoven, [9]). We also will demonstrate the effects of some common non-physical boundary conditions. Finally, we briefly indicate that this model of the auditory periphery provides a superior front end for an ASR (automatic speech recognition)-system.

Waters Rockets for Teaching Momentum and Energy Concepts

NASA Astrophysics Data System (ADS)

Sizemore, Jim; Parish, R. J.; Hooten, James T.

2012-10-01

Concepts regarding momentum and energy are especially difficult for students to grasp and concrete examples are valuable. We will discuss, and show video, of launching water rockets using standard plastic soda and water bottles and describe the launcher composed of PVC pipe and a bicycle pump. We pose the question to students of the ratio of water to air that achieves the greatest time-of-flight. Immediate feedback is obtained by immediately testing student's hypotheses. After several launches the students understanding of Newton's Third Law and momentum and energy concepts improves. This is an engaging activity, students enjoy watching their instructors become thoroughly drenched, and students are enthusiastic. This enthusiasm, fun, and immediate testing of hypotheses reinforce momentum and energy concepts as will be shown by questionnaire results.

Dynamic Testing and Test Anxiety amongst Gifted and Average-Ability Children

ERIC Educational Resources Information Center

Vogelaar, Bart; Bakker, Merel; Elliott, Julian G.; Resing, Wilma C. M.

2017-01-01

Background: Dynamic testing has been proposed as a testing approach that is less disadvantageous for children who may be potentially subject to bias when undertaking conventional assessments. For example, those who encounter high levels of test anxiety, or who are unfamiliar with standardized test procedures, may fail to demonstrate their true…

The intermediates take it all: asymptotics of higher criticism statistics and a powerful alternative based on equal local levels.

PubMed

Gontscharuk, Veronika; Landwehr, Sandra; Finner, Helmut

2015-01-01

The higher criticism (HC) statistic, which can be seen as a normalized version of the famous Kolmogorov-Smirnov statistic, has a long history, dating back to the mid seventies. Originally, HC statistics were used in connection with goodness of fit (GOF) tests but they recently gained some attention in the context of testing the global null hypothesis in high dimensional data. The continuing interest for HC seems to be inspired by a series of nice asymptotic properties related to this statistic. For example, unlike Kolmogorov-Smirnov tests, GOF tests based on the HC statistic are known to be asymptotically sensitive in the moderate tails, hence it is favorably applied for detecting the presence of signals in sparse mixture models. However, some questions around the asymptotic behavior of the HC statistic are still open. We focus on two of them, namely, why a specific intermediate range is crucial for GOF tests based on the HC statistic and why the convergence of the HC distribution to the limiting one is extremely slow. Moreover, the inconsistency in the asymptotic and finite behavior of the HC statistic prompts us to provide a new HC test that has better finite properties than the original HC test while showing the same asymptotics. This test is motivated by the asymptotic behavior of the so-called local levels related to the original HC test. By means of numerical calculations and simulations we show that the new HC test is typically more powerful than the original HC test in normal mixture models. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Advanced Control Design for Wind Turbines; Part I: Control Design, Implementation, and Initial Tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wright, A. D.; Fingersh, L. J.

The purpose of this report is to give wind turbine engineers information and examples of the design, testing through simulation, field implementation, and field testing of advanced wind turbine controls.

[Application of Stata software to test heterogeneity in meta-analysis method].

PubMed

Wang, Dan; Mou, Zhen-yun; Zhai, Jun-xia; Zong, Hong-xia; Zhao, Xiao-dong

2008-07-01

To introduce the application of Stata software to heterogeneity test in meta-analysis. A data set was set up according to the example in the study, and the corresponding commands of the methods in Stata 9 software were applied to test the example. The methods used were Q-test and I2 statistic attached to the fixed effect model forest plot, H statistic and Galbraith plot. The existence of the heterogeneity among studies could be detected by Q-test and H statistic and the degree of the heterogeneity could be detected by I2 statistic. The outliers which were the sources of the heterogeneity could be spotted from the Galbraith plot. Heterogeneity test in meta-analysis can be completed by the four methods in Stata software simply and quickly. H and I2 statistics are more robust, and the outliers of the heterogeneity can be clearly seen in the Galbraith plot among the four methods.

Nanomechanical testing system

DOEpatents

Vodnick, David James; Dwivedi, Arpit; Keranen, Lucas Paul; Okerlund, Michael David; Schmitz, Roger William; Warren, Oden Lee; Young, Christopher David

2014-07-08

An automated testing system includes systems and methods to facilitate inline production testing of samples at a micro (multiple microns) or less scale with a mechanical testing instrument. In an example, the system includes a probe changing assembly for coupling and decoupling a probe of the instrument. The probe changing assembly includes a probe change unit configured to grasp one of a plurality of probes in a probe magazine and couple one of the probes with an instrument probe receptacle. An actuator is coupled with the probe change unit, and the actuator is configured to move and align the probe change unit with the probe magazine and the instrument probe receptacle. In another example, the automated testing system includes a multiple degree of freedom stage for aligning a sample testing location with the instrument. The stage includes a sample stage and a stage actuator assembly including translational and rotational actuators.

Nanomechanical testing system

DOEpatents

Vodnick, David James; Dwivedi, Arpit; Keranen, Lucas Paul; Okerlund, Michael David; Schmitz, Roger William; Warren, Oden Lee; Young, Christopher David

2015-01-27

An automated testing system includes systems and methods to facilitate inline production testing of samples at a micro (multiple microns) or less scale with a mechanical testing instrument. In an example, the system includes a probe changing assembly for coupling and decoupling a probe of the instrument. The probe changing assembly includes a probe change unit configured to grasp one of a plurality of probes in a probe magazine and couple one of the probes with an instrument probe receptacle. An actuator is coupled with the probe change unit, and the actuator is configured to move and align the probe change unit with the probe magazine and the instrument probe receptacle. In another example, the automated testing system includes a multiple degree of freedom stage for aligning a sample testing location with the instrument. The stage includes a sample stage and a stage actuator assembly including translational and rotational actuators.

Nanomechanical testing system

DOEpatents

Vodnick, David James; Dwivedi, Arpit; Keranen, Lucas Paul; Okerlund, Michael David; Schmitz, Roger William; Warren, Oden Lee; Young, Christopher David

2015-02-24

An automated testing system includes systems and methods to facilitate inline production testing of samples at a micro (multiple microns) or less scale with a mechanical testing instrument. In an example, the system includes a probe changing assembly for coupling and decoupling a probe of the instrument. The probe changing assembly includes a probe change unit configured to grasp one of a plurality of probes in a probe magazine and couple one of the probes with an instrument probe receptacle. An actuator is coupled with the probe change unit, and the actuator is configured to move and align the probe change unit with the probe magazine and the instrument probe receptacle. In another example, the automated testing system includes a multiple degree of freedom stage for aligning a sample testing location with the instrument. The stage includes a sample stage and a stage actuator assembly including translational and rotational actuators.

Acoustic emission non-destructive testing of structures using source location techniques.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beattie, Alan G.

2013-09-01

The technology of acoustic emission (AE) testing has been advanced and used at Sandia for the past 40 years. AE has been used on structures including pressure vessels, fire bottles, wind turbines, gas wells, nuclear weapons, and solar collectors. This monograph begins with background topics in acoustics and instrumentation and then focuses on current acoustic emission technology. It covers the overall design and system setups for a test, with a wind turbine blade as the object. Test analysis is discussed with an emphasis on source location. Three test examples are presented, two on experimental wind turbine blades and one onmore » aircraft fire extinguisher bottles. Finally, the code for a FORTRAN source location program is given as an example of a working analysis program. Throughout the document, the stress is on actual testing of real structures, not on laboratory experiments.« less

Risky business: Correlation and causation in longitudinal studies of skill development.

PubMed

Bailey, Drew H; Duncan, Greg J; Watts, Tyler; Clements, Doug H; Sarama, Julie

2018-01-01

Developmental theories often posit that changes in children's early psychological characteristics will affect much later psychological, social, and economic outcomes. However, tests of these theories frequently yield results that are consistent with plausible alternative theories that posit a much smaller causal role for earlier levels of these psychological characteristics. Our article explores this issue with empirical tests of skill-building theories, which predict that early boosts to simpler skills (e.g., numeracy or literacy) or behaviors (e.g., antisocial behavior or executive functions) support the long-term development of more sophisticated skills or behaviors. Substantial longitudinal associations between academic or socioemotional skills measured early and then later in childhood or adolescence are often taken as support of these skill-building processes. Using the example of skill-building in mathematics, we argue that longitudinal correlations, even if adjusted for an extensive set of baseline covariates, constitute an insufficiently risky test of skill-building theories. We first show that experimental manipulation of early math skills generates much smaller effects on later math achievement than the nonexperimental literature has suggested. We then conduct falsification tests that show puzzlingly high cross-domain associations between early math and later literacy achievement. Finally, we show that a skill-building model positing a combination of unmeasured stable factors and skill-building processes can reproduce the pattern of experimental impacts on children's mathematics achievement. Implications for developmental theories, methods, and practice are discussed. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

National Centers for Environmental Prediction

Science.gov Websites

different sites - Examples of the testing on different sites - Computing Environment NCEPLIBS Documentation - Procedures and conventions for NCEPLIBS use - Tutorials of NCEPLIBS use. Examples - Applications and ) 5830 University Research Court College Park, MD 20740 Page Author: EMC Webmaster Page generated:Sunday

An Example of a Practical Biochemistry Examination for Health Professional Students.

ERIC Educational Resources Information Center

Otsuka, Allen; Kadis, Barney

1988-01-01

Uses clinical cases taken from the medical or dental literature for examination of understanding certain aspects of the dental profession. Formulates questions derived from data presented in the case or attempts to present broad principles. Includes 15 example test questions. (MVL)

Coupling of computer modeling with in vitro methodologies to reduce animal usage in toxicity testing.

PubMed

Clewell, H J

1993-05-01

The use of in vitro data to support the development of physiologically based pharmacokinetic (PBPK) models and to reduce the requirement for in vivo testing is demonstrated by three examples. In the first example, polychlorotrifluoroethylene, in vitro studies comparing metabolism and tissue response in rodents and primates made it possible to obtain definitive data for a human risk assessment without resorting to additional in vivo studies with primates. In the second example, a PBPK model for organophosphate esters was developed in which the parameters defining metabolism, tissue partitioning, and enzyme inhibition were all characterized by in vitro studies, and the rest of the model parameters were established from the literature. The resulting model was able to provide a coherent description of enzyme inhibition following both acute and chronic exposures in mice, rats, and humans. In the final example, the carcinogenic risk assessment for methylene chloride was refined by the incorporation of in vitro data on human metabolism into a PBPK model.

A multiwave range test for obstacle reconstructions with unknown physical properties

NASA Astrophysics Data System (ADS)

Potthast, Roland; Schulz, Jochen

2007-08-01

We develop a new multiwave version of the range test for shape reconstruction in inverse scattering theory. The range test [R. Potthast, et al., A `range test' for determining scatterers with unknown physical properties, Inverse Problems 19(3) (2003) 533-547] has originally been proposed to obtain knowledge about an unknown scatterer when the far field pattern for only one plane wave is given. Here, we extend the method to the case of multiple waves and show that the full shape of the unknown scatterer can be reconstructed. We further will clarify the relation between the range test methods, the potential method [A. Kirsch, R. Kress, On an integral equation of the first kind in inverse acoustic scattering, in: Inverse Problems (Oberwolfach, 1986), Internationale Schriftenreihe zur Numerischen Mathematik, vol. 77, Birkhauser, Basel, 1986, pp. 93-102] and the singular sources method [R. Potthast, Point sources and multipoles in inverse scattering theory, Habilitation Thesis, Gottingen, 1999]. In particular, we propose a new version of the Kirsch-Kress method using the range test and a new approach to the singular sources method based on the range test and potential method. Numerical examples of reconstructions for all four methods are provided.

Framing Effects are Robust to Linguistic Disambiguation: A Critical Test of Contemporary Theory

PubMed Central

Chick, Christina F.; Reyna, Valerie F.; Corbin, Jonathan C.

2015-01-01

Theoretical accounts of risky choice framing effects assume that decision makers interpret framing options as extensionally equivalent, such that if 600 lives are at stake, saving 200 implies that 400 die. However, many scholars have argued that framing effects are caused, instead, by filling in pragmatically implied information. This linguistic ambiguity hypothesis is grounded in neo-Gricean pragmatics, information leakage, and schema theory. In two experiments, we conducted a critical test of the linguistic ambiguity hypothesis and its relation to framing. We controlled for this crucial implied information by disambiguating it using instructions and detailed examples, followed by multiple quizzes. After disambiguating missing information, we presented standard framing problems plus truncated versions, varying types of missing information. Truncations were also critical tests of prospect theory and fuzzy trace theory. Participants were not only college students, but also middle-aged adults (who showed similar results). Contrary to the ambiguity hypothesis, participants who interpreted missing information as complementary to stated information none the less showed robust framing effects. Although adding words like “at least” can change interpretations of framing information, this form of linguistic ambiguity is not necessary to observe risky choice framing effects. PMID:26348200

An improved design method of a tuned mass damper for an in-service footbridge

NASA Astrophysics Data System (ADS)

Shi, Weixing; Wang, Liangkun; Lu, Zheng

2018-03-01

Tuned mass damper (TMD) has a wide range of applications in the vibration control of footbridges. However, the traditional engineering design method may lead to a mistuned TMD. In this paper, an improved TMD design method based on the model updating is proposed. Firstly, the original finite element model (FEM) is studied and the natural characteristics of the in-service or newly built footbridge is identified by field test, and then the original FEM is updated. TMD is designed according to the new updated FEM, and it is optimized according to the simulation on vibration control effects. Finally, the installation and field measurement of TMD are carried out. The improved design method can be applied to both in-service and newly built footbridges. This paper illustrates the improved design method with an engineering example. The frequency identification results of field test and original FEM show that there is a relatively large difference between them. The TMD designed according to the updated FEM has better vibration control effect than the TMD designed according to the original FEM. The site test results show that TMD has good effect on controlling human-induced vibrations.

Modelling and control issues of dynamically substructured systems: adaptive forward prediction taken as an example

PubMed Central

Tu, Jia-Ying; Hsiao, Wei-De; Chen, Chih-Ying

2014-01-01

Testing techniques of dynamically substructured systems dissects an entire engineering system into parts. Components can be tested via numerical simulation or physical experiments and run synchronously. Additional actuator systems, which interface numerical and physical parts, are required within the physical substructure. A high-quality controller, which is designed to cancel unwanted dynamics introduced by the actuators, is important in order to synchronize the numerical and physical outputs and ensure successful tests. An adaptive forward prediction (AFP) algorithm based on delay compensation concepts has been proposed to deal with substructuring control issues. Although the settling performance and numerical conditions of the AFP controller are improved using new direct-compensation and singular value decomposition methods, the experimental results show that a linear dynamics-based controller still outperforms the AFP controller. Based on experimental observations, the least-squares fitting technique, effectiveness of the AFP compensation and differences between delay and ordinary differential equations are discussed herein, in order to reflect the fundamental issues of actuator modelling in relevant literature and, more specifically, to show that the actuator and numerical substructure are heterogeneous dynamic components and should not be collectively modelled as a homogeneous delay differential equation. PMID:25104902

Scene-aware joint global and local homographic video coding

NASA Astrophysics Data System (ADS)

Peng, Xiulian; Xu, Jizheng; Sullivan, Gary J.

2016-09-01

Perspective motion is commonly represented in video content that is captured and compressed for various applications including cloud gaming, vehicle and aerial monitoring, etc. Existing approaches based on an eight-parameter homography motion model cannot deal with this efficiently, either due to low prediction accuracy or excessive bit rate overhead. In this paper, we consider the camera motion model and scene structure in such video content and propose a joint global and local homography motion coding approach for video with perspective motion. The camera motion is estimated by a computer vision approach, and camera intrinsic and extrinsic parameters are globally coded at the frame level. The scene is modeled as piece-wise planes, and three plane parameters are coded at the block level. Fast gradient-based approaches are employed to search for the plane parameters for each block region. In this way, improved prediction accuracy and low bit costs are achieved. Experimental results based on the HEVC test model show that up to 9.1% bit rate savings can be achieved (with equal PSNR quality) on test video content with perspective motion. Test sequences for the example applications showed a bit rate savings ranging from 3.7 to 9.1%.

Recurrence network measures for hypothesis testing using surrogate data: Application to black hole light curves

NASA Astrophysics Data System (ADS)

Jacob, Rinku; Harikrishnan, K. P.; Misra, R.; Ambika, G.

2018-01-01

Recurrence networks and the associated statistical measures have become important tools in the analysis of time series data. In this work, we test how effective the recurrence network measures are in analyzing real world data involving two main types of noise, white noise and colored noise. We use two prominent network measures as discriminating statistic for hypothesis testing using surrogate data for a specific null hypothesis that the data is derived from a linear stochastic process. We show that the characteristic path length is especially efficient as a discriminating measure with the conclusions reasonably accurate even with limited number of data points in the time series. We also highlight an additional advantage of the network approach in identifying the dimensionality of the system underlying the time series through a convergence measure derived from the probability distribution of the local clustering coefficients. As examples of real world data, we use the light curves from a prominent black hole system and show that a combined analysis using three primary network measures can provide vital information regarding the nature of temporal variability of light curves from different spectroscopic classes.

A study of different fabrics to increase radar cross section of humans.

PubMed

Ödman, Torbjörn; Welinder, Jan; Andersson, Nils; Otterskog, Magnus; Lindén, Maria; Ödman, Natalia; Larsson, Christer

2015-01-01

This purpose of the study was to increase the visibility on radar for unprotected pedestrians with the aid of conducting fabric. The experiment comprised measurements of four types of fabric to determine the radio frequency properties, such as radar cross section (RCS) for the vehicle radar frequency 77 GHz and transmission (shielding) in the frequency range 3-18 GHz. Two different thicknesses of polypyrrole (PPy) nonvowen fabric were tested and one thickness for 30 % and 40 % stainless steel fabrics respectively. A jacket with the thinner nonvowen material and one with 40 % steel were tested and compared to an unmodified jacket in the RCS measurement. The measurement showed an increase in RCS of 4 dB for the jacket with the 40 % steel lining compared to the unmodified jacket. The transmission measurement was aimed at determining the fabric with the highest transmission of an incoming radio wave. The 30 % steel fabric and the two thicknesses of the nonvowen fabrics were tested. One practical application is for example the use of radar reflective material in search and rescue (SAR) clothes. The study showed that the 30 % steel fabric was the best candidate for further RCS measurements.

Framing effects are robust to linguistic disambiguation: A critical test of contemporary theory.

PubMed

Chick, Christina F; Reyna, Valerie F; Corbin, Jonathan C

2016-02-01

Theoretical accounts of risky choice framing effects assume that decision makers interpret framing options as extensionally equivalent, such that if 600 lives are at stake, saving 200 implies that 400 die. However, many scholars have argued that framing effects are caused, instead, by filling in pragmatically implied information. This linguistic ambiguity hypothesis is grounded in neo-Gricean pragmatics, information leakage, and schema theory. In 2 experiments, we conducted critical tests of the linguistic ambiguity hypothesis and its relation to framing. We controlled for this crucial implied information by disambiguating it using instructions and detailed examples, followed by multiple quizzes. After disambiguating missing information, we presented standard framing problems plus truncated versions, varying types of missing information. Truncations were also critical tests of prospect theory and fuzzy trace theory. Participants were not only college students, but also middle-age adults (who showed similar results). Contrary to the ambiguity hypothesis, participants who interpreted missing information as complementary to stated information nonetheless showed robust framing effects. Although adding words like "at least" can change interpretations of framing information, this form of linguistic ambiguity is not necessary to observe risky choice framing effects. (c) 2016 APA, all rights reserved).

Flute ``breath support'' perception and its acoustical correlates

NASA Astrophysics Data System (ADS)

Cossette, Isabelle A.; Sabourin, Patrick

2004-05-01

Music educators and performers commonly refer to ``breath support'' in flute playing, yet the term ``support'' is neither well-defined nor consistently used. Different breathing strategies used by professional flautists who were instructed to play with and without support were previously identified by the authors. In the current study, 14 musical excerpts with and without support were recorded by five professional flautists. Eleven professional flautists listened to the recordings in a random order and ranked (1 to 6) how much of the following sound qualities they judged to be in each example: support, intonation, control and musical expressiveness. Answers to the test showed that musical expressiveness was associated more closely with the supported excerpts than the answers about support itself. The ratings for each sound quality were highly intercorrelated. Acoustical parameters were analyzed (frequency and centroid variation within each note) and compared with the results of the perception test in order to better understand how the acoustical and psychological variables were related. The acoustical analysis of the central part of the notes did not show evident correlation with the answers of the perception test. [Work funded by the Social Sciences and Humanities Research Council of Canada.

Gaps of operators

NASA Astrophysics Data System (ADS)

Jung, Il Bong; Lim, Pil Sang; Park, Sang Soo

2005-04-01

We construct examples which distinguish clearly the classes of p-hyponormal operators for 0

The Case History Method of Testing Students in Gross Anatomy.

ERIC Educational Resources Information Center

Cruise, Leon J.

1980-01-01

The use of case histories to test a student's knowledge of the previous weeks' dissection in gross anatomy class is discussed. The test is seen as a way to integrate other basic sciences. An example of this type of test is provided. (MLW)

Assessment of genotoxicity of herbal medicinal products: application of the "bracketing and matrixing" concept using the example of Valerianae radix (valerian root).

PubMed

Kelber, Olaf; Wegener, Tankred; Steinhoff, Barbara; Staiger, Christiane; Wiesner, Jacqueline; Knöss, Werner; Kraft, Karin

2014-01-01

An assessment of genotoxicity is a precondition for marketing authorization respectively registration of herbal medicinal products (HMPs), as well as for inclusion into the 'Community list of herbal substances, preparations and combinations thereof for use in traditional herbal medicinal products' established by the European Commission in accordance with Directive 2001/83/EC as amended, and based on proposals from the Committee on Herbal Medicinal Products (HMPC). In the 'Guideline on the assessment of genotoxicity of herbal substances/preparations' (EMEA/HMPC/107079/2007) HMPC has described a stepwise approach for genotoxicity testing, according to which the Ames test is a sufficient base for the assessment of genotoxicity in case of an unequivocally negative result. For reducing efforts for testing of individual herbal substances/preparations, HMPC has also developed the 'guideline on selection of test materials for genotoxicity testing for traditional herbal medicinal products/herbal medicinal products' (EMEA/HMPC/67644/2009) with the aim to allow testing of a standard range of test materials which could be considered representative of the commonly used preparations from a specific herbal drug according to a 'bracketing/matrixing' approach. The purpose of this paper is to provide data on the practical application of this bracketing and matrixing concept using the example of Valerianae radix, with the intention of facilitating its inclusion in the "Community list". Five extraction solvents, representing the extremes of the polarity range and including also mid-range extraction solvents, were used, covering the entire spectrum of phytochemical constituents of Valerianae radix, thereby including polar and non-polar constituents. Extracts were tested in the Ames test according to all relevant guidelines. Results were unequivocally negative for all extracts. A review of the literature showed that this result is in accordance with the available data, thus demonstrating the lack of a genotoxic potential. In conclusion the two guidelines on genotoxicity provide a practically applicable concept. Valerianae radix has no genotoxic potential, supporting its use in HMPs and its inclusion in the Community list. Copyright © 2014 The Authors. Published by Elsevier GmbH.. All rights reserved.

Using Temperature Sensitive Paint Technology

NASA Technical Reports Server (NTRS)

Hamner, M. P.; Popernack, T. G., Jr.; Owens, L. R.; Wahls, R. A.

2002-01-01

New facilities and test techniques afford research aerodynamicists many opportunities to investigate complex aerodynamic phenomena. For example, NASA Langley Research Center's National Transonic Facility (NTF) can hold Mach number, Reynolds number, dynamic pressure, stagnation temperature and stagnation pressure constant during testing. This is important because the wing twist associated with model construction may mask important Reynolds number effects associated with the flight vehicle. Beyond this, the NTF's ability to vary Reynolds number allows for important research into the study of boundary layer transition. The capabilities of facilities such as the NTF coupled with test techniques such as temperature sensitive paint yield data that can be applied not only to vehicle design but also to validation of computational methods. Development of Luminescent Paint Technology for acquiring pressure and temperature measurements began in the mid-1980s. While pressure sensitive luminescent paints (PSP) were being developed to acquire data for aerodynamic performance and loads, temperature sensitive luminescent paints (TSP) have been used for a much broader range of applications. For example, TSP has been used to acquire surface temperature data to determine the heating due to rotating parts in various types of mechanical systems. It has been used to determine the heating pattern(s) on circuit boards. And, it has been used in boundary layer analysis and applied to the validation of full-scale flight performance predictions. That is, data acquired on the same model can be used to develop trends from off design to full scale flight Reynolds number, e.g. to show the progression of boundary layer transition. A discussion of issues related to successfully setting-up TSP tests and using TSP systems for boundary layer studies is included in this paper, as well as results from a variety of TSP tests. TSP images included in this paper are all grey-scale so that similar to pictures from sublimating chemical tests areas of laminar flow appear "lighter," or white, and areas of turbulent flow appear "darker."

Smart Materials Meet Multifunctional Biomedical Devices: Current and Prospective Implications for Nanomedicine.

PubMed

Genchi, Giada Graziana; Marino, Attilio; Tapeinos, Christos; Ciofani, Gianni

2017-01-01

With the increasing advances in the fabrication and in monitoring approaches of nanotechnology devices, novel materials are being synthesized and tested for the interaction with biological environments. Among them, smart materials in particular provide versatile and dynamically tunable platforms for the investigation and manipulation of several biological activities with very low invasiveness in hardly accessible anatomical districts. In the following, we will briefly recall recent examples of nanotechnology-based materials that can be remotely activated and controlled through different sources of energy, such as electromagnetic fields or ultrasounds, for their relevance to both basic science investigations and translational nanomedicine. Moreover, we will introduce some examples of hybrid materials showing mutually beneficial components for the development of multifunctional devices, able to simultaneously perform duties like imaging, tissue targeting, drug delivery, and redox state control. Finally, we will highlight challenging perspectives for the development of theranostic agents (merging diagnostic and therapeutic functionalities), underlining open questions for these smart nanotechnology-based devices to be made readily available to the patients in need.

Granger causality--statistical analysis under a configural perspective.

PubMed

von Eye, Alexander; Wiedermann, Wolfgang; Mun, Eun-Young

2014-03-01

The concept of Granger causality can be used to examine putative causal relations between two series of scores. Based on regression models, it is asked whether one series can be considered the cause for the second series. In this article, we propose extending the pool of methods available for testing hypotheses that are compatible with Granger causation by adopting a configural perspective. This perspective allows researchers to assume that effects exist for specific categories only or for specific sectors of the data space, but not for other categories or sectors. Configural Frequency Analysis (CFA) is proposed as the method of analysis from a configural perspective. CFA base models are derived for the exploratory analysis of Granger causation. These models are specified so that they parallel the regression models used for variable-oriented analysis of hypotheses of Granger causation. An example from the development of aggression in adolescence is used. The example shows that only one pattern of change in aggressive impulses over time Granger-causes change in physical aggression against peers.

Using Ultrasonic Speckle Velocimetry to Detect Fluid Instabilities in a Surfactant Solution

NASA Astrophysics Data System (ADS)

Bice, Jason E.

Rheometry is a leading technology used to define material properties of multi-phase viscoelastic fluid-like materials, such as the shear modulus and viscosity. However, traditional rheometry relies on a mechanical response from a rotating or oscillating rotor of various geometries which does not allow for any spatial or temporal quantification of the material characteristics. Further, the setup operates under the assumption of a uniform and homogeneous flow. Thus, only qualitative deductions can be realized when a complex fluid displays inhomogeneous behavior, such as wall slip or shear banding. Due to this lack of capability, non-intrusive imaging is required to define and quantify behavior that occurs in a complex fluid under shear conditions. This thesis outlines the design, fabrication, and experimental examples of an adapted ultrasonic speckle velocimetry device, which enables spatial and temporal resolution of inhomogeneous fluid behavior using ultrasound acoustics. For the experimental example, a commercial surfactant mixture (hair shampoo) was tested to show the utility and precision that ultrasonic speckle velocimetry possesses.

Fully Convolutional Neural Networks Improve Abdominal Organ Segmentation.

PubMed

Bobo, Meg F; Bao, Shunxing; Huo, Yuankai; Yao, Yuang; Virostko, Jack; Plassard, Andrew J; Lyu, Ilwoo; Assad, Albert; Abramson, Richard G; Hilmes, Melissa A; Landman, Bennett A

2018-03-01

Abdominal image segmentation is a challenging, yet important clinical problem. Variations in body size, position, and relative organ positions greatly complicate the segmentation process. Historically, multi-atlas methods have achieved leading results across imaging modalities and anatomical targets. However, deep learning is rapidly overtaking classical approaches for image segmentation. Recently, Zhou et al. showed that fully convolutional networks produce excellent results in abdominal organ segmentation of computed tomography (CT) scans. Yet, deep learning approaches have not been applied to whole abdomen magnetic resonance imaging (MRI) segmentation. Herein, we evaluate the applicability of an existing fully convolutional neural network (FCNN) designed for CT imaging to segment abdominal organs on T2 weighted (T2w) MRI's with two examples. In the primary example, we compare a classical multi-atlas approach with FCNN on forty-five T2w MRI's acquired from splenomegaly patients with five organs labeled (liver, spleen, left kidney, right kidney, and stomach). Thirty-six images were used for training while nine were used for testing. The FCNN resulted in a Dice similarity coefficient (DSC) of 0.930 in spleens, 0.730 in left kidneys, 0.780 in right kidneys, 0.913 in livers, and 0.556 in stomachs. The performance measures for livers, spleens, right kidneys, and stomachs were significantly better than multi-atlas (p < 0.05, Wilcoxon rank-sum test). In a secondary example, we compare the multi-atlas approach with FCNN on 138 distinct T2w MRI's with manually labeled pancreases (one label). On the pancreas dataset, the FCNN resulted in a median DSC of 0.691 in pancreases versus 0.287 for multi-atlas. The results are highly promising given relatively limited training data and without specific training of the FCNN model and illustrate the potential of deep learning approaches to transcend imaging modalities.

Fully convolutional neural networks improve abdominal organ segmentation

NASA Astrophysics Data System (ADS)

Bobo, Meg F.; Bao, Shunxing; Huo, Yuankai; Yao, Yuang; Virostko, Jack; Plassard, Andrew J.; Lyu, Ilwoo; Assad, Albert; Abramson, Richard G.; Hilmes, Melissa A.; Landman, Bennett A.

2018-03-01

Abdominal image segmentation is a challenging, yet important clinical problem. Variations in body size, position, and relative organ positions greatly complicate the segmentation process. Historically, multi-atlas methods have achieved leading results across imaging modalities and anatomical targets. However, deep learning is rapidly overtaking classical approaches for image segmentation. Recently, Zhou et al. showed that fully convolutional networks produce excellent results in abdominal organ segmentation of computed tomography (CT) scans. Yet, deep learning approaches have not been applied to whole abdomen magnetic resonance imaging (MRI) segmentation. Herein, we evaluate the applicability of an existing fully convolutional neural network (FCNN) designed for CT imaging to segment abdominal organs on T2 weighted (T2w) MRI's with two examples. In the primary example, we compare a classical multi-atlas approach with FCNN on forty-five T2w MRI's acquired from splenomegaly patients with five organs labeled (liver, spleen, left kidney, right kidney, and stomach). Thirty-six images were used for training while nine were used for testing. The FCNN resulted in a Dice similarity coefficient (DSC) of 0.930 in spleens, 0.730 in left kidneys, 0.780 in right kidneys, 0.913 in livers, and 0.556 in stomachs. The performance measures for livers, spleens, right kidneys, and stomachs were significantly better than multi-atlas (p < 0.05, Wilcoxon rank-sum test). In a secondary example, we compare the multi-atlas approach with FCNN on 138 distinct T2w MRI's with manually labeled pancreases (one label). On the pancreas dataset, the FCNN resulted in a median DSC of 0.691 in pancreases versus 0.287 for multi-atlas. The results are highly promising given relatively limited training data and without specific training of the FCNN model and illustrate the potential of deep learning approaches to transcend imaging modalities. 1

Protein Kinase C Overactivity Impairs Prefrontal Cortical Regulation of Working Memory

NASA Astrophysics Data System (ADS)

Birnbaum, S. G.; Yuan, P. X.; Wang, M.; Vijayraghavan, S.; Bloom, A. K.; Davis, D. J.; Gobeske, K. T.; Sweatt, J. D.; Manji, H. K.; Arnsten, A. F. T.

2004-10-01

The prefrontal cortex is a higher brain region that regulates thought, behavior, and emotion using representational knowledge, operations often referred to as working memory. We tested the influence of protein kinase C (PKC) intracellular signaling on prefrontal cortical cognitive function and showed that high levels of PKC activity in prefrontal cortex, as seen for example during stress exposure, markedly impair behavioral and electrophysiological measures of working memory. These data suggest that excessive PKC activation can disrupt prefrontal cortical regulation of behavior and thought, possibly contributing to signs of prefrontal cortical dysfunction such as distractibility, impaired judgment, impulsivity, and thought disorder.

The simplest possible design for a KB microfocus mirror system?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, S. P., E-mail: steve.collins@diamond.ac.uk; Scott, S. M.; Hawkins, D. M.

2016-07-27

We report a design for a Kirkpatrick-Baez (KB) microfocussing mirror system. The main components are described, with emphasis on a ‘tripod’ manipulator, where we outline the required coordinate transformation calculations. The merit of this device lies in its simplicity of design, minimal degrees of freedom, and speed and ease of setup on a beamline. Test results and an example of the mirrors in use on Diamond Beamline I16, showing a high-resolution polar domain map of KTiOPO{sub 4} with a spot size of 1.25 µm × 1.5 µm, are presented.

A Closer Look at Data Independence: Comment on “Lies, Damned Lies, and Statistics (in Geology)”

NASA Astrophysics Data System (ADS)

Kravtsov, Sergey; Saunders, Rolando Olivas

2011-02-01

In his Forum (Eos, 90(47), 443, doi:10.1029/2009EO470004, 2009), P. Vermeesch suggests that statistical tests are not fit to interpret long data records. He asserts that for large enough data sets any true null hypothesis will always be rejected. This is certainly not the case! Here we revisit this author's example of weekly distribution of earthquakes and show that statistical results support the commonsense expectation that seismic activity does not depend on weekday (see the online supplement to this Eos issue for details (http://www.agu.org/eos_elec/)).

Protein kinase C overactivity impairs prefrontal cortical regulation of working memory.

PubMed

Birnbaum, S G; Yuan, P X; Wang, M; Vijayraghavan, S; Bloom, A K; Davis, D J; Gobeske, K T; Sweatt, J D; Manji, H K; Arnsten, A F T

2004-10-29

The prefrontal cortex is a higher brain region that regulates thought, behavior, and emotion using representational knowledge, operations often referred to as working memory. We tested the influence of protein kinase C (PKC) intracellular signaling on prefrontal cortical cognitive function and showed that high levels of PKC activity in prefrontal cortex, as seen for example during stress exposure, markedly impair behavioral and electrophysiological measures of working memory. These data suggest that excessive PKC activation can disrupt prefrontal cortical regulation of behavior and thought, possibly contributing to signs of prefrontal cortical dysfunction such as distractibility, impaired judgment, impulsivity, and thought disorder.

Wind turbine acoustics

NASA Technical Reports Server (NTRS)

Hubbard, Harvey H.; Shepherd, Kevin P.

1990-01-01

Available information on the physical characteristics of the noise generated by wind turbines is summarized, with example sound pressure time histories, narrow- and broadband frequency spectra, and noise radiation patterns. Reviewed are noise measurement standards, analysis technology, and a method of characterizing wind turbine noise. Prediction methods are given for both low-frequency rotational harmonics and broadband noise components. Also included are atmospheric propagation data showing the effects of distance and refraction by wind shear. Human perception thresholds, based on laboratory and field tests, are given. Building vibration analysis methods are summarized. The bibliography of this report lists technical publications on all aspects of wind turbine acoustics.

30 CFR 7.403 - Application requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Electric Cables, Signaling Cables, and Cable Splice Kits § 7.403 Application requirements. (a) Electric cables and signaling cables. A single... product: (1) Product information: (i) Cable type (for example, G or G-GC). (ii) Construction (for example...

30 CFR 7.403 - Application requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Electric Cables, Signaling Cables, and Cable Splice Kits § 7.403 Application requirements. (a) Electric cables and signaling cables. A single... product: (1) Product information: (i) Cable type (for example, G or G-GC). (ii) Construction (for example...

30 CFR 7.403 - Application requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Electric Cables, Signaling Cables, and Cable Splice Kits § 7.403 Application requirements. (a) Electric cables and signaling cables. A single... product: (1) Product information: (i) Cable type (for example, G or G-GC). (ii) Construction (for example...

Bounded Partial Sums?

ERIC Educational Resources Information Center

Brilleslyper, Michael A.; Wolverton, Robert H.

2008-01-01

In this article we consider an example suitable for investigation in many mid and upper level undergraduate mathematics courses. Fourier series provide an excellent example of the differences between uniform and non-uniform convergence. We use Dirichlet's test to investigate the convergence of the Fourier series for a simple periodic saw tooth…

Embellishing Problem-Solving Examples with Deep Structure Information Facilitates Transfer

ERIC Educational Resources Information Center

Lee, Hee Seung; Betts, Shawn; Anderson, John R.

2017-01-01

Appreciation of problem structure is critical to successful learning. Two experiments investigated effective ways of communicating problem structure in a computer-based learning environment and tested whether verbal instruction is necessary to specify solution steps, when deep structure is already embellished by instructional examples.…

Operational Art Requirements in the Korean War

DTIC Science & Technology

2012-05-17

Historical case studies can provide concrete examples to test the validity of theory and doctrine. A critical analysis of the examples provided by...war into a global conflagration .45 However, as early as 13 July 1950, MacArthur developed his plan to do more than reestablish the territorial

TargetMiner: microRNA target prediction with systematic identification of tissue-specific negative examples.

PubMed

Bandyopadhyay, Sanghamitra; Mitra, Ramkrishna

2009-10-15

Prediction of microRNA (miRNA) target mRNAs using machine learning approaches is an important area of research. However, most of the methods suffer from either high false positive or false negative rates. One reason for this is the marked deficiency of negative examples or miRNA non-target pairs. Systematic identification of non-target mRNAs is still not addressed properly, and therefore, current machine learning approaches are compelled to rely on artificially generated negative examples for training. In this article, we have identified approximately 300 tissue-specific negative examples using a novel approach that involves expression profiling of both miRNAs and mRNAs, miRNA-mRNA structural interactions and seed-site conservation. The newly generated negative examples are validated with pSILAC dataset, which elucidate the fact that the identified non-targets are indeed non-targets.These high-throughput tissue-specific negative examples and a set of experimentally verified positive examples are then used to build a system called TargetMiner, a support vector machine (SVM)-based classifier. In addition to assessing the prediction accuracy on cross-validation experiments, TargetMiner has been validated with a completely independent experimental test dataset. Our method outperforms 10 existing target prediction algorithms and provides a good balance between sensitivity and specificity that is not reflected in the existing methods. We achieve a significantly higher sensitivity and specificity of 69% and 67.8% based on a pool of 90 feature set and 76.5% and 66.1% using a set of 30 selected feature set on the completely independent test dataset. In order to establish the effectiveness of the systematically generated negative examples, the SVM is trained using a different set of negative data generated using the method in Yousef et al. A significantly higher false positive rate (70.6%) is observed when tested on the independent set, while all other factors are kept the same. Again, when an existing method (NBmiRTar) is executed with the our proposed negative data, we observe an improvement in its performance. These clearly establish the effectiveness of the proposed approach of selecting the negative examples systematically. TargetMiner is now available as an online tool at www.isical.ac.in/ approximately bioinfo_miu

40 CFR 1065.672 - Drift correction.

Code of Federal Regulations, 2013 CFR

2013-07-01

... interval gas analyzer response to the span gas concentration. x postspan = post-test interval gas analyzer... = post-test interval gas analyzer response to the zero gas concentration. Example: x refzero = 0 µmol/mol... occurred before one or more previous test intervals. (4) For any post-test interval concentrations, use...

40 CFR 1065.672 - Drift correction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... interval gas analyzer response to the span gas concentration. x postspan = post-test interval gas analyzer... = post-test interval gas analyzer response to the zero gas concentration. Example: x refzero = 0 µmol/mol... occurred before one or more previous test intervals. (4) For any post-test interval concentrations, use...

40 CFR 1065.672 - Drift correction.

Code of Federal Regulations, 2014 CFR

2014-07-01

... interval gas analyzer response to the span gas concentration. x postspan = post-test interval gas analyzer... = post-test interval gas analyzer response to the zero gas concentration. Example: x refzero = 0 µmol/mol... occurred before one or more previous test intervals. (4) For any post-test interval concentrations, use...

40 CFR 1065.672 - Drift correction.

Code of Federal Regulations, 2012 CFR

2012-07-01

... interval gas analyzer response to the span gas concentration. x postspan = post-test interval gas analyzer... = post-test interval gas analyzer response to the zero gas concentration. Example: x refzero = 0 µmol/mol... occurred before one or more previous test intervals. (4) For any post-test interval concentrations, use...

40 CFR 1065.672 - Drift correction.

Code of Federal Regulations, 2011 CFR

2011-07-01

... interval gas analyzer response to the span gas concentration. x postspan = post-test interval gas analyzer... = post-test interval gas analyzer response to the zero gas concentration. Example: x refzero = 0 µmol/mol... occurred before one or more previous test intervals. (4) For any post-test interval concentrations, use...

Eye Movements in Implicit Artificial Grammar Learning

ERIC Educational Resources Information Center

Silva, Susana; Inácio, Filomena; Folia, Vasiliki; Petersson, Karl Magnus

2017-01-01

Artificial grammar learning (AGL) has been probed with forced-choice behavioral tests (active tests). Recent attempts to probe the outcomes of learning (implicitly acquired knowledge) with eye-movement responses (passive tests) have shown null results. However, these latter studies have not tested for sensitivity effects, for example, increased…

View of Flume Tunnel #5 showing an example of concrete ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of Flume Tunnel #5 showing an example of concrete flume covered with concrete slabs as it enters a tunnel under the road (FS 502). Looking southwest - Childs-Irving Hydroelectric Project, Childs System, Flume Tunnel No. 5, Forest Service Road 708/502, Camp Verde, Yavapai County, AZ

QBIC project: querying images by content, using color, texture, and shape

NASA Astrophysics Data System (ADS)

Niblack, Carlton W.; Barber, Ron; Equitz, Will; Flickner, Myron D.; Glasman, Eduardo H.; Petkovic, Dragutin; Yanker, Peter; Faloutsos, Christos; Taubin, Gabriel

1993-04-01

In the query by image content (QBIC) project we are studying methods to query large on-line image databases using the images' content as the basis of the queries. Examples of the content we use include color, texture, and shape of image objects and regions. Potential applications include medical (`Give me other images that contain a tumor with a texture like this one'), photo-journalism (`Give me images that have blue at the top and red at the bottom'), and many others in art, fashion, cataloging, retailing, and industry. Key issues include derivation and computation of attributes of images and objects that provide useful query functionality, retrieval methods based on similarity as opposed to exact match, query by image example or user drawn image, the user interfaces, query refinement and navigation, high dimensional database indexing, and automatic and semi-automatic database population. We currently have a prototype system written in X/Motif and C running on an RS/6000 that allows a variety of queries, and a test database of over 1000 images and 1000 objects populated from commercially available photo clip art images. In this paper we present the main algorithms for color texture, shape and sketch query that we use, show example query results, and discuss future directions.

Multiclassifier combinatorial proteomics of organelle shadows at the example of mitochondria in chromatin data.

PubMed

Kustatscher, Georg; Grabowski, Piotr; Rappsilber, Juri

2016-02-01

Subcellular localization is an important aspect of protein function, but the protein composition of many intracellular compartments is poorly characterized. For example, many nuclear bodies are challenging to isolate biochemically and thus remain inaccessible to proteomics. Here, we explore covariation in proteomics data as an alternative route to subcellular proteomes. Rather than targeting a structure of interest biochemically, we target it by machine learning. This becomes possible by taking data obtained for one organelle and searching it for traces of another organelle. As an extreme example and proof-of-concept we predict mitochondrial proteins based on their covariation in published interphase chromatin data. We detect about ⅓ of the known mitochondrial proteins in our chromatin data, presumably most as contaminants. However, these proteins are not present at random. We show covariation of mitochondrial proteins in chromatin proteomics data. We then exploit this covariation by multiclassifier combinatorial proteomics to define a list of mitochondrial proteins. This list agrees well with different databases on mitochondrial composition. This benchmark test raises the possibility that, in principle, covariation proteomics may also be applicable to structures for which no biochemical isolation procedures are available. © 2015 The Authors. Proteomics Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

76 FR 66006 - Revised Medical Criteria for Evaluating Congenital Disorders That Affect Multiple Body Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

... definitive test that documents your disorder (for example, genetic analysis or evidence of biochemical... testing, and We will not accept the fluorescence in situ hybridization (FISH) test--a screening test--and... results even if the person did have a test. Because we do not have definitive test results, we would...

Judgments of Learning are Influenced by Multiple Cues In Addition to Memory for Past Test Accuracy.

PubMed

Hertzog, Christopher; Hines, Jarrod C; Touron, Dayna R

When people try to learn new information (e.g., in a school setting), they often have multiple opportunities to study the material. One of the most important things to know is whether people adjust their study behavior on the basis of past success so as to increase their overall level of learning (for example, by emphasizing information they have not yet learned). Monitoring their learning is a key part of being able to make those kinds of adjustments. We used a recognition memory task to replicate prior research showing that memory for past test outcomes influences later monitoring, as measured by judgments of learning (JOLs; confidence that the material has been learned), but also to show that subjective confidence in whether the test answer and the amount of time taken to restudy the items also have independent effects on JOLs. We also show that there are individual differences in the effects of test accuracy and test confidence on JOLs, showing that some but not all people use past test experiences to guide monitoring of their new learning. Monitoring learning is therefore a complex process of considering multiple cues, and some people attend to those cues more effectively than others. Improving the quality of monitoring performance and learning could lead to better study behaviors and better learning. An individual's memory of past test performance (MPT) is often cited as the primary cue for judgments of learning (JOLs) following test experience during multi-trial learning tasks (Finn & Metcalfe, 2007; 2008). We used an associative recognition task to evaluate MPT-related phenomena, because performance monitoring, as measured by recognition test confidence judgments (CJs), is fallible and varies in accuracy across persons. The current study used multilevel regression models to show the simultaneous and independent influences of multiple cues on Trial 2 JOLs, in addition to performance accuracy (the typical measure of MPT in cued-recall experiments). These cues include recognition CJs, perceived recognition fluency, and Trial 2 study time allocation (an index of reprocessing fluency). Our results expand the scope of MPT-related phenomena in recognition memory testing to show independent effects of recognition test accuracy and CJs on second-trial JOLs, while also demonstrating individual differences in the effects of these cues on JOLs (as manifested in significant random effects for those regression effects in the model). The effect of study time on second-trial JOLs controlling on other variables, including Trial 1 recognition memory accuracy, also demonstrates that second-trial encoding behavior influence JOLs in addition to MPT.

Estimating Achievement Gaps from Test Scores Reported in Ordinal "Proficiency" Categories

ERIC Educational Resources Information Center

Ho, Andrew D.; Reardon, Sean F.

2012-01-01

Test scores are commonly reported in a small number of ordered categories. Examples of such reporting include state accountability testing, Advanced Placement tests, and English proficiency tests. This paper introduces and evaluates methods for estimating achievement gaps on a familiar standard-deviation-unit metric using data from these ordered…

Taking Decisions: Assessment for University Entry

ERIC Educational Resources Information Center

Plassmann, Sibylle; Zeidler, Beate

2014-01-01

Language testing means taking decisions: about the test taker's results, but also about the test construct and the measures taken in order to ensure quality. This article takes the German test "telc Deutsch C1 Hochschule" as an example to illustrate this decision-making process in an academic context. The test is used for university…

Associations between adolescent cannabis use and neuropsychological decline: a longitudinal co-twin control study.

PubMed

Meier, Madeline H; Caspi, Avshalom; Danese, Andrea; Fisher, Helen L; Houts, Renate; Arseneault, Louise; Moffitt, Terrie E

2018-02-01

This study tested whether adolescents who used cannabis or met criteria for cannabis dependence showed neuropsychological impairment prior to cannabis initiation and neuropsychological decline from before to after cannabis initiation. A longitudinal co-twin control study. Participants were 1989 twins from the Environmental Risk (E-Risk) Longitudinal Twin Study, a nationally representative birth cohort of twins born in England and Wales from 1994 to 1995. Frequency of cannabis use and cannabis dependence were assessed at age 18. Intelligence quotient (IQ) was obtained at ages 5, 12 and 18. Executive functions were assessed at age 18. Compared with adolescents who did not use cannabis, adolescents who used cannabis had lower IQ in childhood prior to cannabis initiation and lower IQ at age 18, but there was little evidence that cannabis use was associated with IQ decline from ages 12-18. For example, adolescents with cannabis dependence had age 12 and age 18 IQ scores that were 5.61 (t = -3.11, P = 0.002) and 7.34 IQ points (t = -5.27, P < 0.001) lower than adolescents without cannabis dependence, but adolescents with cannabis dependence did not show greater IQ decline from age 12-18 (t = -1.27, P = 0.20). Moreover, adolescents who used cannabis had poorer executive functions at age 18 than adolescents who did not use cannabis, but these associations were generally not apparent within twin pairs. For example, twins who used cannabis more frequently than their co-twin performed similarly to their co-twin on five of six executive function tests (Ps > 0.10). The one exception was that twins who used cannabis more frequently than their co-twin performed worse on one working memory test (Spatial Span reversed; β = -0.07, P = 0.036). Short-term cannabis use in adolescence does not appear to cause IQ decline or impair executive functions, even when cannabis use reaches the level of dependence. Family background factors explain why adolescent cannabis users perform worse on IQ and executive function tests. © 2017 Society for the Study of Addiction.

An architecture for an autonomous learning robot

NASA Technical Reports Server (NTRS)

Tillotson, Brian

1988-01-01

An autonomous learning device must solve the example bounding problem, i.e., it must divide the continuous universe into discrete examples from which to learn. We describe an architecture which incorporates an example bounder for learning. The architecture is implemented in the GPAL program. An example run with a real mobile robot shows that the program learns and uses new causal, qualitative, and quantitative relationships.

[Identification of Good-Practice Projects in Promoting Physical Activity - Methods, Pitfalls and Sampled Outcomes].

PubMed

Henn, Annette; Karger, Claudia; Wöhlken, Katrin; Meier, Diana; Ungerer-Röhrich, Ulrike; Graf, Christine; Woll, Alexander

2017-03-01

The aim of this paper is to identify and show examples of good practice of public health promotion. For this, uniform quality criteria were worked out under consideration of national and international scientific literature.For the identification of examples of good practice, a comparison of different quality criteria was carried out and combined with each other in a first step. In the following step, examples of good practice were identified after a comprehensive search. The choice of the "good-practice" projects is exemplary and lays no claim to completeness.6 main quality criteria (QC) of programs promoting physical activity could be identified in the national and international context. The analysis showed altogether 10 projects which can exemplarily be classified as examples of good practice of the target groups of children and teenagers, adults, older people and people with pre-existing illnesses. These projects, however, show major differences in their (methodological) quality.The analysis reports a lack of "Good-Practice" examples. Deficits lie mainly in documentation and sustainability. Because of incomplete documentation, an assessment as a "Good-Practice" example is only possible to a limited extent; a lot of information, particularly in the evaluation, is missing. © Georg Thieme Verlag KG Stuttgart · New York.

40 CFR 1039.501 - How do I run a valid emission test?

Code of Federal Regulations, 2010 CFR

2010-07-01

... emission testing. Unless we specify otherwise, the appropriate diesel test fuel is the ultra low-sulfur diesel fuel. If we allow you to use a test fuel with higher sulfur levels, identify the test fuel in your... selection of the test fuel (see § 1039.135(c)(9)). For example, do not test with ultra low-sulfur diesel...

40 CFR 1039.501 - How do I run a valid emission test?

Code of Federal Regulations, 2012 CFR

2012-07-01

... emission testing. Unless we specify otherwise, the appropriate diesel test fuel is the ultra low-sulfur diesel fuel. If we allow you to use a test fuel with higher sulfur levels, identify the test fuel in your... selection of the test fuel (see § 1039.135(c)(9)). For example, do not test with ultra low-sulfur diesel...

40 CFR 1039.501 - How do I run a valid emission test?

Code of Federal Regulations, 2013 CFR

2013-07-01

... emission testing. Unless we specify otherwise, the appropriate diesel test fuel is the ultra low-sulfur diesel fuel. If we allow you to use a test fuel with higher sulfur levels, identify the test fuel in your... selection of the test fuel (see § 1039.135(c)(9)). For example, do not test with ultra low-sulfur diesel...

40 CFR 1039.501 - How do I run a valid emission test?

Code of Federal Regulations, 2014 CFR

2014-07-01

... emission testing. Unless we specify otherwise, the appropriate diesel test fuel is the ultra low-sulfur diesel fuel. If we allow you to use a test fuel with higher sulfur levels, identify the test fuel in your... selection of the test fuel (see § 1039.135(c)(9)). For example, do not test with ultra low-sulfur diesel...

40 CFR 1039.501 - How do I run a valid emission test?

Code of Federal Regulations, 2011 CFR

2011-07-01

... emission testing. Unless we specify otherwise, the appropriate diesel test fuel is the ultra low-sulfur diesel fuel. If we allow you to use a test fuel with higher sulfur levels, identify the test fuel in your... selection of the test fuel (see § 1039.135(c)(9)). For example, do not test with ultra low-sulfur diesel...

Fungal Tests

MedlinePlus

... preparation is needed. See More See Less Accordion Title Common Questions How is it used? Fungal tests ... involving skin, nails, or mucous membranes appear, for example: Itchy, red, scaly areas of skin Nails that ...

Susceptibility Testing

MedlinePlus

... the drugs usually used to treat them. Some examples include staphylococci ("staph") and Pseudomonas aeruginosa . Sometimes there ... susceptibility testing techniques is an active area of research. As the FDA approves more of these rapid ...

A complete tank test of a flying-boat hull with a pointed step -N.A.C.A. Model No. 22

NASA Technical Reports Server (NTRS)

Shoemaker, James M

1934-01-01

The results of a complete tank test of a model of a flying-boat hull of unconventional form, having a deep pointed step, are presented in this note. The advantage of the pointed-step type over the usual forms of flying-boat hulls with respect to resistance at high speeds is pointed out. A take-off example using the data from these tests is worked out, and the results are compared with those of an example in which the test data for a hull of the type in general use in the United States are applied to a flying boat having the same design specifications. A definite saving in take-off run is shown by the pointed-step type.

Syntactic priming in American Sign Language.

PubMed

Hall, Matthew L; Ferreira, Victor S; Mayberry, Rachel I

2015-01-01

Psycholinguistic studies of sign language processing provide valuable opportunities to assess whether language phenomena, which are primarily studied in spoken language, are fundamentally shaped by peripheral biology. For example, we know that when given a choice between two syntactically permissible ways to express the same proposition, speakers tend to choose structures that were recently used, a phenomenon known as syntactic priming. Here, we report two experiments testing syntactic priming of a noun phrase construction in American Sign Language (ASL). Experiment 1 shows that second language (L2) signers with normal hearing exhibit syntactic priming in ASL and that priming is stronger when the head noun is repeated between prime and target (the lexical boost effect). Experiment 2 shows that syntactic priming is equally strong among deaf native L1 signers, deaf late L1 learners, and hearing L2 signers. Experiment 2 also tested for, but did not find evidence of, phonological or semantic boosts to syntactic priming in ASL. These results show that despite the profound differences between spoken and signed languages in terms of how they are produced and perceived, the psychological representation of sentence structure (as assessed by syntactic priming) operates similarly in sign and speech.

Summarising and validating test accuracy results across multiple studies for use in clinical practice.

PubMed

Riley, Richard D; Ahmed, Ikhlaaq; Debray, Thomas P A; Willis, Brian H; Noordzij, J Pieter; Higgins, Julian P T; Deeks, Jonathan J

2015-06-15

Following a meta-analysis of test accuracy studies, the translation of summary results into clinical practice is potentially problematic. The sensitivity, specificity and positive (PPV) and negative (NPV) predictive values of a test may differ substantially from the average meta-analysis findings, because of heterogeneity. Clinicians thus need more guidance: given the meta-analysis, is a test likely to be useful in new populations, and if so, how should test results inform the probability of existing disease (for a diagnostic test) or future adverse outcome (for a prognostic test)? We propose ways to address this. Firstly, following a meta-analysis, we suggest deriving prediction intervals and probability statements about the potential accuracy of a test in a new population. Secondly, we suggest strategies on how clinicians should derive post-test probabilities (PPV and NPV) in a new population based on existing meta-analysis results and propose a cross-validation approach for examining and comparing their calibration performance. Application is made to two clinical examples. In the first example, the joint probability that both sensitivity and specificity will be >80% in a new population is just 0.19, because of a low sensitivity. However, the summary PPV of 0.97 is high and calibrates well in new populations, with a probability of 0.78 that the true PPV will be at least 0.95. In the second example, post-test probabilities calibrate better when tailored to the prevalence in the new population, with cross-validation revealing a probability of 0.97 that the observed NPV will be within 10% of the predicted NPV. © 2015 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

Statistical grand rounds: a review of analysis and sample size calculation considerations for Wilcoxon tests.

PubMed

Divine, George; Norton, H James; Hunt, Ronald; Dienemann, Jacqueline

2013-09-01

When a study uses an ordinal outcome measure with unknown differences in the anchors and a small range such as 4 or 7, use of the Wilcoxon rank sum test or the Wilcoxon signed rank test may be most appropriate. However, because nonparametric methods are at best indirect functions of standard measures of location such as means or medians, the choice of the most appropriate summary measure can be difficult. The issues underlying use of these tests are discussed. The Wilcoxon-Mann-Whitney odds directly reflects the quantity that the rank sum procedure actually tests, and thus it can be a superior summary measure. Unlike the means and medians, its value will have a one-to-one correspondence with the Wilcoxon rank sum test result. The companion article appearing in this issue of Anesthesia & Analgesia ("Aromatherapy as Treatment for Postoperative Nausea: A Randomized Trial") illustrates these issues and provides an example of a situation for which the medians imply no difference between 2 groups, even though the groups are, in fact, quite different. The trial cited also provides an example of a single sample that has a median of zero, yet there is a substantial shift for much of the nonzero data, and the Wilcoxon signed rank test is quite significant. These examples highlight the potential discordance between medians and Wilcoxon test results. Along with the issues surrounding the choice of a summary measure, there are considerations for the computation of sample size and power, confidence intervals, and multiple comparison adjustment. In addition, despite the increased robustness of the Wilcoxon procedures relative to parametric tests, some circumstances in which the Wilcoxon tests may perform poorly are noted, along with alternative versions of the procedures that correct for such limitations. 

Retrospective Binary-Trait Association Test Elucidates Genetic Architecture of Crohn Disease

PubMed Central

Jiang, Duo; Zhong, Sheng; McPeek, Mary Sara

2016-01-01

In genetic association testing, failure to properly control for population structure can lead to severely inflated type 1 error and power loss. Meanwhile, adjustment for relevant covariates is often desirable and sometimes necessary to protect against spurious association and to improve power. Many recent methods to account for population structure and covariates are based on linear mixed models (LMMs), which are primarily designed for quantitative traits. For binary traits, however, LMM is a misspecified model and can lead to deteriorated performance. We propose CARAT, a binary-trait association testing approach based on a mixed-effects quasi-likelihood framework, which exploits the dichotomous nature of the trait and achieves computational efficiency through estimating equations. We show in simulation studies that CARAT consistently outperforms existing methods and maintains high power in a wide range of population structure settings and trait models. Furthermore, CARAT is based on a retrospective approach, which is robust to misspecification of the phenotype model. We apply our approach to a genome-wide analysis of Crohn disease, in which we replicate association with 17 previously identified regions. Moreover, our analysis on 5p13.1, an extensively reported region of association, shows evidence for the presence of multiple independent association signals in the region. This example shows how CARAT can leverage known disease risk factors to shed light on the genetic architecture of complex traits. PMID:26833331

Robust regression for large-scale neuroimaging studies.

PubMed

Fritsch, Virgile; Da Mota, Benoit; Loth, Eva; Varoquaux, Gaël; Banaschewski, Tobias; Barker, Gareth J; Bokde, Arun L W; Brühl, Rüdiger; Butzek, Brigitte; Conrod, Patricia; Flor, Herta; Garavan, Hugh; Lemaitre, Hervé; Mann, Karl; Nees, Frauke; Paus, Tomas; Schad, Daniel J; Schümann, Gunter; Frouin, Vincent; Poline, Jean-Baptiste; Thirion, Bertrand

2015-05-01

Multi-subject datasets used in neuroimaging group studies have a complex structure, as they exhibit non-stationary statistical properties across regions and display various artifacts. While studies with small sample sizes can rarely be shown to deviate from standard hypotheses (such as the normality of the residuals) due to the poor sensitivity of normality tests with low degrees of freedom, large-scale studies (e.g. >100 subjects) exhibit more obvious deviations from these hypotheses and call for more refined models for statistical inference. Here, we demonstrate the benefits of robust regression as a tool for analyzing large neuroimaging cohorts. First, we use an analytic test based on robust parameter estimates; based on simulations, this procedure is shown to provide an accurate statistical control without resorting to permutations. Second, we show that robust regression yields more detections than standard algorithms using as an example an imaging genetics study with 392 subjects. Third, we show that robust regression can avoid false positives in a large-scale analysis of brain-behavior relationships with over 1500 subjects. Finally we embed robust regression in the Randomized Parcellation Based Inference (RPBI) method and demonstrate that this combination further improves the sensitivity of tests carried out across the whole brain. Altogether, our results show that robust procedures provide important advantages in large-scale neuroimaging group studies. Copyright © 2015 Elsevier Inc. All rights reserved.

76 FR 16570 - Interest Rate Risk

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... greater than 10 years in the statement of financial condition of its most recent call report. For example..., asset valuation, or net economic value); Choose tests, such as interest rate shocks, that the credit... activities. For example, a credit union that offers basic share accounts, only short-term loans, i.e., no...

26 CFR 1.460-6 - Look-back method.

Code of Federal Regulations, 2013 CFR

2013-04-01

... costs and that are permanent because, for example, tax rates change during the term of the contract. (2... from a long-term contract prior to the completion of a contract. Paragraph (h) provides examples... long-term contract meets the gross receipts test for both alternative minimum tax and regular tax...

29 CFR 1635.8 - Acquisition of genetic information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... individual's family medical history, the results of an individual's or family member's genetic tests, the... information was not “likely to result in a covered entity obtaining genetic information” (for example, where... response to an ordinary expression of concern that is the subject of the conversation. For example, the...

16 CFR 255.5 - Disclosure of material connections.

Code of Federal Regulations, 2010 CFR

2010-01-01

... examples below. Example 1: A drug company commissions research on its product by an outside organization. The drug company determines the overall subject of the research (e.g., to test the efficacy of a newly.... Although the design and conduct of the research project are controlled by the outside research organization...

Video-Based Test Questions: A Novel Means of Evaluation

ERIC Educational Resources Information Center

Hertenstein, Matthew J.; Wayand, Joseph F.

2008-01-01

Many psychology instructors present videotaped examples of behavior at least occasionally during their courses. However, few include video clips during examinations. We provide examples of video-based questions, offer guidelines for their use, and discuss their benefits and drawbacks. In addition, we provide empirical evidence to support the use…

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

48 CFR 315.204-5 - Part IV-Representations and instructions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... as using too few.) (3) Examples of topics that form a basis for evaluation factors. Typical examples of topics that form a basis for the development of evaluation factors are listed in the following... special research, test, and other equipment or facilities. (vii) Managerial capability (ability to achieve...

Sex Bias in Testing: A Review with Policy Recommendations.

ERIC Educational Resources Information Center

Tittle, Carol Kehr

Educational achievement tests, career interest inventories, and aptitude tests are reviewed for examples of sex bias, and changes in policy concerning the use of these tests are suggested. These suggestions are within the authority and responsibility of local and state educational administrators, teachers, counselors, parents, and students. The…

77 FR 62417 - Annual Stress Test

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-15

... to perform stress tests. For example, one commenter recommended that covered banks be permitted to... that the annual stress tests required under the final rule will be only one component of the broader... stress test. The FDIC may require a covered bank to include one or more additional scenarios in its...

SINA: A test system for proximity fuses

NASA Astrophysics Data System (ADS)

Ruizenaar, M. G. A.

1989-04-01

SINA, a signal generator that can be used for testing proximity fuses, is described. The circuitry of proximity fuses is presented; the output signal of the RF circuit results from a mixing of the emitted signal and received signal that is Doppler shifted in frequency by the relative motion of the fuse with respect to the reflecting target of surface. With SINA, digitized and stored target and clutter signals (previously measured) can be transformed to Doppler signals, for example during a real flight. SINA can be used for testing fuse circuitry, for example in the verification of results of computer simulations of the low frequency Doppler signal processing. The software of SINA and its use are explained.

Screening for colon cancer: A test for occult blood.

PubMed

Khakimov, N; Khasanova, G; Ershova, K; Gibadullina, L; Vetkina, T; Lobisheva, G; Chumakova, A

2015-01-01

The relevance of the problem of colorectal cancer (CRC) is evident because of extremely high morbidity and mortality rates, associated with this disease. CRC is mostly diagnosed only at very advanced stages. The reduction of mortality can be achieved by the popularization of screening-methods for early identification of CRC and adenomatous polyps of the colon, which are proved to be precancerous condition. Fecal occult blood test is a well-known method of screening for CRC. The advantages of this method when compared, for example, with colonoscopy are its simplicity and cost-effectiveness.Two techniques are usually used for detection of occult blood in the stool: Hemoccult (Guaiac) test and immunochemical test for hemoglobin. There is no consensus among researchers regarding the validity of these tests for the diagnosis of colorectal cancer. For example, J.S. Mandel (1996) notes 60% sensitivity of Guaiac-test for the detection of the early forms of colorectal cancer, while O.I. Kit (2014) suggets that it is not higher than 30%. There are also various opinions about specificity of these two tests. To review the literature on the validity of the fecal occult blood tests for the diagnosis of CRC. We looked for articles (electronic versions) available for free in the full-text versions, published from June 1, 1990 to December 31, 2014 in Russian or English. The following databases were used for search: E-LIBRARY; Cochrane; MEDLINE; EMBASE; Google search. Only original research papers were analyzed. Literature reviews or systematic reviews were not taken for analyses. 1) use of Guaiac and/or immunochemical fecal occult blood test as screening-tests for the detection of colorectal cancer and/or colon polyps (1 cm or more in diameter) in people older than 45 years; 2) comparing of results with the results of colonoscopy (colonoscopy is counted by majority of the authors as a "gold standard" for the diagnosis of CRC and adenomatous polyps). Initial keyword search returned 803 000 results, of which 449 sources were selected. After reading the abstracts, 29 articles that met inclusion criteria were kept. 10 other articles were excluded after that because they did not contain enough data for extraction or did not contain a control group. At the final step 19 articles were used for meta-analysis.Forest plot and Rock curve, which were developed with inclusion of the data from all studies, showed heterogeneity of the data. Additional analyzes were performed in subgroups with different diagnoses and various tests.The sensitivity of the Guaiac test for the diagnosis of colorectal cancer varied from 0.13 to 1.00, and specificity - from 0.69 to 0.99. The sensitivity of the immunochemical test for the diagnosis of CRC ranged from 0.42 to 0.94 with specificity ranging from 0.40 to 1.00.The sensitivity of the Guaiac test for the diagnosis of the colon polyps was between 0.05 and 0.69, and its specificity - from 0.67 to 0.98. The sensitivity of the immunochemical test for the diagnosis of polyps was from 0.24 to 0.75, and its specificity - from 0.40 to 0.97.Bivariate analysis of the validity of Guaiac test and immunochemical method for the diagnosis of colorectal cancer showed better results for the immunochemical test compared to Guaiac test. The tests showed very similar results when used for the diagnosis of polyposis. Bivariate analysis, comparing the validity of tests for the diagnosis of colorectal cancer versus polyposis demonstrated better results for CRC.Multivariate analysis of the validity of the Guaiac and immunochemical tests for the diagnosis of colorectal cancer and polyps also showed better results for detection of colorectal cancer compared with the polyps for both tests. At the same time the highest validity for the diagnosis of CRC was demonstrated for immunochemical analysis. 1. The sensitivity of the Guaiac test for occult blood in stool is lower than its specificity.2. Broad dispersion of the validity characteristics of the fecal occult blood tests was observed.3. The validity of tests for occult blood was higher when they were used for detection of colorectal cancer than of colon polyposis.4. The highest validity rate has been demonstrated for the immunochemical test when it was used for colon cancer screening.

Enhancing medical-surgical nursing practice: using practice tests and clinical examples to promote active learning and program evaluation.

PubMed

DuHamel, Martha B; Hirnle, Constance; Karvonen, Colleen; Sayre, Cindy; Wyant, Sheryl; Colobong Smith, Nancy; Keener, Sheila; Barrett, Shannon; Whitney, Joanne D

2011-10-01

In a 14-week medical-surgical nursing review course, two teaching strategies are used to promote active learning and assess the transfer of knowledge to nursing practice. Practice tests and clinical examples provide opportunities for participants to engage in self-assessment and reflective learning and enhance their nursing knowledge, skills, and practice. These strategies also contribute to program evaluation and are adaptable to a variety of course formats, including traditional classroom, web conference, and online self-study. Copyright 2011, SLACK Incorporated.

FEMFLOW3D; a finite-element program for the simulation of three-dimensional aquifers; version 1.0

USGS Publications Warehouse

Durbin, Timothy J.; Bond, Linda D.

1998-01-01

This document also includes model validation, source code, and example input and output files. Model validation was performed using four test problems. For each test problem, the results of a model simulation with FEMFLOW3D were compared with either an analytic solution or the results of an independent numerical approach. The source code, written in the ANSI x3.9-1978 FORTRAN standard, and the complete input and output of an example problem are listed in the appendixes.

Potential application of the consistency approach for vaccine potency testing.

PubMed

Arciniega, J; Sirota, L A

2012-01-01

The Consistency Approach offers the possibility of reducing the number of animals used for a potency test. However, it is critical to assess the effect that such reduction may have on assay performance. Consistency of production, sometimes referred to as consistency of manufacture or manufacturing, is an old concept implicit in regulation, which aims to ensure the uninterrupted release of safe and effective products. Consistency of manufacture can be described in terms of process capability, or the ability of a process to produce output within specification limits. For example, the standard method for potency testing of inactivated rabies vaccines is a multiple-dilution vaccination challenge test in mice that gives a quantitative, although highly variable estimate. On the other hand, a single-dilution test that does not give a quantitative estimate, but rather shows if the vaccine meets the specification has been proposed. This simplified test can lead to a considerable reduction in the number of animals used. However, traditional indices of process capability assume that the output population (potency values) is normally distributed, which clearly is not the case for the simplified approach. Appropriate computation of capability indices for the latter case will require special statistical considerations.

Simple construct evaluation with latent class analysis: An investigation of Facebook addiction and the development of a short form of the Facebook Addiction Test (F-AT).

PubMed

Dantlgraber, Michael; Wetzel, Eunike; Schützenberger, Petra; Stieger, Stefan; Reips, Ulf-Dietrich

2016-09-01

In psychological research, there is a growing interest in using latent class analysis (LCA) for the investigation of quantitative constructs. The aim of this study is to illustrate how LCA can be applied to gain insights on a construct and to select items during test development. We show the added benefits of LCA beyond factor-analytic methods, namely being able (1) to describe groups of participants that differ in their response patterns, (2) to determine appropriate cutoff values, (3) to evaluate items, and (4) to evaluate the relative importance of correlated factors. As an example, we investigated the construct of Facebook addiction using the Facebook Addiction Test (F-AT), an adapted version of the Internet Addiction Test (I-AT). Applying LCA facilitates the development of new tests and short forms of established tests. We present a short form of the F-AT based on the LCA results and validate the LCA approach and the short F-AT with several external criteria, such as chatting, reading newsfeeds, and posting status updates. Finally, we discuss the benefits of LCA for evaluating quantitative constructs in psychological research.

Using three-dimensional rapid prototyping in the design and development of orthopaedic screws in standardised pull-out tests.

PubMed

Leslie, Laura Jane; Connolly, Ashley; Swadener, John G; Junaid, Sarah; Theivendran, Kanthan; Deshmukh, Subodh C

2018-06-01

The majority of orthopaedic screws are designed, tested and manufactured by existing orthopaedics companies and are predominantly developed with healthy bone in mind. The timescales and costs involved in the development of a new screw design, for example, for osteoporotic bone, are high. In this study, standard wood screws were used to analyse the concept of using three-dimensional printing, or rapid prototyping, as a viable stage of development in the design of a new bone screw. Six wood screws were reverse engineered and printed in polymeric material using stereolithography. Three of the designs were also printed in Ti6Al4V using direct metal laser sintering; however, these were not of sufficient quality to test further. Both the original metal screws (metal) and polymeric rapid prototyping screws were then tested using standard pull-out tests from low-density polyurethane blocks (Sawbones). Results showed the highest pull-out strengths for screws with the longest thread length and the smallest inner diameter. Of the six screw designs tested, five showed no more than a 17% variance between the metal and rapid prototyping results. A similar pattern of results was shown between the screw designs for both the metal and rapid prototyping screws in five of the six cases. While not producing fully comparable pull-out results to orthopaedic screws, the results from this study do provide evidence of the potential usefulness and cost-effectiveness of rapid prototyping in the early stages of design and testing of orthopaedic screws.

Comparing perceived and test-based knowledge of cancer risk and prevention among Hispanic and African Americans: an example of community participatory research.

PubMed

Jones, Loretta; Bazargan, Mohsen; Lucas-Wright, Anna; Vadgama, Jaydutt V; Vargas, Roberto; Smith, James; Otoukesh, Salman; Maxwell, Annette E

2013-01-01

Most theoretical formulations acknowledge that knowledge and awareness of cancer screening and prevention recommendations significantly influence health behaviors. This study compares perceived knowledge of cancer prevention and screening with test-based knowledge in a community sample. We also examine demographic variables and self-reported cancer screening and prevention behaviors as correlates of both knowledge scores, and consider whether cancer related knowledge can be accurately assessed using just a few, simple questions in a short and easy-to-complete survey. We used a community-partnered participatory research approach to develop our study aims and a survey. The study sample was composed of 180 predominantly African American and Hispanic community individuals who participated in a full-day cancer prevention and screening promotion conference in South Los Angeles, California, on July 2011. Participants completed a self-administered survey in English or Spanish at the beginning of the conference. Our data indicate that perceived and test-based knowledge scores are only moderately correlated. Perceived knowledge score shows a stronger association with demographic characteristics and other cancer related variables than the test-based score. Thirteen out of twenty variables that are examined in our study showed a statistically significant correlation with the perceived knowledge score, however, only four variables demonstrated a statistically significant correlation with the test-based knowledge score. Perceived knowledge of cancer prevention and screening was assessed with fewer items than test-based knowledge. Thus, using this assessment could potentially reduce respondent burden. However, our data demonstrate that perceived and test-based knowledge are separate constructs.

Bayesian Estimation of Combined Accuracy for Tests with Verification Bias

PubMed Central

Broemeling, Lyle D.

2011-01-01

This presentation will emphasize the estimation of the combined accuracy of two or more tests when verification bias is present. Verification bias occurs when some of the subjects are not subject to the gold standard. The approach is Bayesian where the estimation of test accuracy is based on the posterior distribution of the relevant parameter. Accuracy of two combined binary tests is estimated employing either “believe the positive” or “believe the negative” rule, then the true and false positive fractions for each rule are computed for two tests. In order to perform the analysis, the missing at random assumption is imposed, and an interesting example is provided by estimating the combined accuracy of CT and MRI to diagnose lung cancer. The Bayesian approach is extended to two ordinal tests when verification bias is present, and the accuracy of the combined tests is based on the ROC area of the risk function. An example involving mammography with two readers with extreme verification bias illustrates the estimation of the combined test accuracy for ordinal tests. PMID:26859487

Angiofibroma of soft tissue: clinicopathologic study of 2 cases of a recently characterized benign soft tissue tumor.

PubMed

Zhao, Ming; Sun, Ke; Li, Changshui; Zheng, Jiangjiang; Yu, Jingjing; Jin, Jie; Xia, Wenping

2013-01-01

Angiofibroma of soft tissue is a very recently characterized, histologically distinctive benign mesenchymal neoplasm of unknown cellular origin composed of 2 principal components, the spindle cell component and very prominent stromal vasculatures. It usually occurs in middle-aged adults, with a female predominance. Herein, we describe the clinical and pathologic details of 2 other examples of this benign tumor. Both patients were middle-aged male and presented with a slow-growing, painless mass located in the deep-seated soft tissue of thigh and left posterior neck region, respectively. Grossly, both tumors were well-demarcated, partial encapsulated of a grayish-white color with firm consistence. Histologically, one case showed morphology otherwise identical to those have been described before, whereas the other case showed in areas being more cellular than most examples of this subtype tumor had, with the lesional cells frequently exhibiting short fascicular, vaguely storiform and occasionally swirling arrangements, which posed a challenging differential diagnosis. Immunostains performed on both tumors did not confirm any specific cell differentiation with lesional cells only reactive for vimentin and focally desmin and negative for all the other markers tested. This report serves to broaden the morphologic spectrum of angiofibroma of soft tumor. Awareness of this tumor is important to prevent misdiagnosis as other more aggressive soft tissue tumor.

Spin and Wind Directions II: A Bell State Quantum Model.

PubMed

Aerts, Diederik; Arguëlles, Jonito Aerts; Beltran, Lester; Geriente, Suzette; Sassoli de Bianchi, Massimiliano; Sozzo, Sandro; Veloz, Tomas

2018-01-01

In the first half of this two-part article (Aerts et al. in Found Sci. doi:10.1007/s10699-017-9528-9, 2017b), we analyzed a cognitive psychology experiment where participants were asked to select pairs of directions that they considered to be the best example of Two Different Wind Directions , and showed that the data violate the CHSH version of Bell's inequality, with same magnitude as in typical Bell-test experiments in physics. In this second part, we complete our analysis by presenting a symmetrized version of the experiment, still violating the CHSH inequality but now also obeying the marginal law, for which we provide a full quantum modeling in Hilbert space, using a singlet state and suitably chosen product measurements. We also address some of the criticisms that have been recently directed at experiments of this kind, according to which they would not highlight the presence of genuine forms of entanglement. We explain that these criticisms are based on a view of entanglement that is too restrictive, thus unable to capture all possible ways physical and conceptual entities can connect and form systems behaving as a whole. We also provide an example of a mechanical model showing that the violations of the marginal law and Bell inequalities are generally to be associated with different mechanisms.

Heterochromatic self-association, a determinant of nuclear organization, does not require sequence homology in Drosophila.

PubMed Central

Sage, Brian T; Csink, Amy K

2003-01-01

Chromosomes of higher eukaryotes contain blocks of heterochromatin that can associate with each other in the interphase nucleus. A well-studied example of heterochromatic interaction is the brown(Dominant) (bwD) chromosome of D. melanogaster, which contains an approximately 1.6-Mbp insertion of AAGAG repeats near the distal tip of chromosome 2. This insertion causes association of the tip with the centric heterochromatin of chromosome 2 (2h), which contains megabases of AAGAG repeats. Here we describe an example, other than bwD, in which distally translocated heterochromatin associates with centric heterochromatin. Additionally, we show that when a translocation places bwD on a different chromosome, bwD tends to associate with the centric heterochromatin of this chromosome, even when the chromosome contains a small fraction of the sequence homology present elsewhere. To further test the importance of sequence homology in these interactions, we used interspecific mating to introgress the bwD allele from D. melanogaster into D. simulans, which lacks the AAGAG on the autosomes. We find that D. simulans bwD associates with 2h, which lacks the AAGAG sequence, while it does not associate with the AAGAG containing X chromosome heterochromatin. Our results show that intranuclear association of separate heterochromatic blocks does not require that they contain the same sequence. PMID:14668374

Neural-network-directed alignment of optical systems using the laser-beam spatial filter as an example

NASA Technical Reports Server (NTRS)

Decker, Arthur J.; Krasowski, Michael J.; Weiland, Kenneth E.

1993-01-01

This report describes an effort at NASA Lewis Research Center to use artificial neural networks to automate the alignment and control of optical measurement systems. Specifically, it addresses the use of commercially available neural network software and hardware to direct alignments of the common laser-beam-smoothing spatial filter. The report presents a general approach for designing alignment records and combining these into training sets to teach optical alignment functions to neural networks and discusses the use of these training sets to train several types of neural networks. Neural network configurations used include the adaptive resonance network, the back-propagation-trained network, and the counter-propagation network. This work shows that neural networks can be used to produce robust sequencers. These sequencers can learn by example to execute the step-by-step procedures of optical alignment and also can learn adaptively to correct for environmentally induced misalignment. The long-range objective is to use neural networks to automate the alignment and operation of optical measurement systems in remote, harsh, or dangerous aerospace environments. This work also shows that when neural networks are trained by a human operator, training sets should be recorded, training should be executed, and testing should be done in a manner that does not depend on intellectual judgments of the human operator.

Comparison between deterministic and statistical wavelet estimation methods through predictive deconvolution: Seismic to well tie example from the North Sea

NASA Astrophysics Data System (ADS)

de Macedo, Isadora A. S.; da Silva, Carolina B.; de Figueiredo, J. J. S.; Omoboya, Bode

2017-01-01

Wavelet estimation as well as seismic-to-well tie procedures are at the core of every seismic interpretation workflow. In this paper we perform a comparative study of wavelet estimation methods for seismic-to-well tie. Two approaches to wavelet estimation are discussed: a deterministic estimation, based on both seismic and well log data, and a statistical estimation, based on predictive deconvolution and the classical assumptions of the convolutional model, which provides a minimum-phase wavelet. Our algorithms, for both wavelet estimation methods introduce a semi-automatic approach to determine the optimum parameters of deterministic wavelet estimation and statistical wavelet estimation and, further, to estimate the optimum seismic wavelets by searching for the highest correlation coefficient between the recorded trace and the synthetic trace, when the time-depth relationship is accurate. Tests with numerical data show some qualitative conclusions, which are probably useful for seismic inversion and interpretation of field data, by comparing deterministic wavelet estimation and statistical wavelet estimation in detail, especially for field data example. The feasibility of this approach is verified on real seismic and well data from Viking Graben field, North Sea, Norway. Our results also show the influence of the washout zones on well log data on the quality of the well to seismic tie.

System Design and Locomotion of Superball, an Untethered Tensegrity Robot

NASA Technical Reports Server (NTRS)

Sabelhaus, Andrew P.; Bruce, Jonathan; Caluwaerts, Ken; Manovi, Pavlo; Firoozi, Roya Fallah; Dobi, Sarah; Agogino, Alice M.; Sunspiral, Vytas

2015-01-01

The Spherical Underactuated Planetary Exploration Robot ball (SUPERball) is an ongoing project within NASA Ames Research Center's Intelligent Robotics Group and the Dynamic Tensegrity Robotics Lab (DTRL). The current SUPERball is the first full prototype of this tensegrity robot platform, eventually destined for space exploration missions. This work, building on prior published discussions of individual components, presents the fully-constructed robot. Various design improvements are discussed, as well as testing results of the sensors and actuators that illustrate system performance. Basic low-level motor position controls are implemented and validated against sensor data, which show SUPERball to be uniquely suited for highly dynamic state trajectory tracking. Finally, SUPERball is shown in a simple example of locomotion. This implementation of a basic motion primitive shows SUPERball in untethered control.

Use of the Box-Cox Transformation in Detecting Changepoints in Daily Precipitation Data Series

NASA Astrophysics Data System (ADS)

Wang, X. L.; Chen, H.; Wu, Y.; Pu, Q.

2009-04-01

This study integrates a Box-Cox power transformation procedure into two statistical tests for detecting changepoints in Gaussian data series, to make the changepoint detection methods applicable to non-Gaussian data series, such as daily precipitation amounts. The detection power aspects of transformed methods in a common trend two-phase regression setting are assessed by Monte Carlo simulations for data of a log-normal or Gamma distribution. The results show that the transformed methods have increased the power of detection, in comparison with the corresponding original (untransformed) methods. The transformed data much better approximate to a Gaussian distribution. As an example of application, the new methods are applied to a series of daily precipitation amounts recorded at a station in Canada, showing satisfactory detection power.

Constructing an Online Test Framework, Using the Example of a Sign Language Receptive Skills Test

ERIC Educational Resources Information Center

Haug, Tobias; Herman, Rosalind; Woll, Bencie

2015-01-01

This paper presents the features of an online test framework for a receptive skills test that has been adapted, based on a British template, into different sign languages. The online test includes features that meet the needs of the different sign language versions. Features such as usability of the test, automatic saving of scores, and score…

Dynamic (Vibration) Testing: Design-Certification of Aerospace System

NASA Technical Reports Server (NTRS)

Aggarwal, Pravin K.

2010-01-01

Various types of dynamic testing of structures for certification purposes are described, including vibration, shock and acoustic testing. Modal testing is discussed as it frequently complements dynamic testing and is part of the structural verification/validation process leading up to design certification. Examples of dynamic and modal testing are presented as well as the common practices, procedures and standards employed.

CSF Analysis

MedlinePlus

... one or more hours to avoid a potential post-test headache. The lumbar puncture procedure usually takes less ... in CSF with laboratory tests such as molecular tests or culture. Parasitic meningitis or encephalitis are rare and can be lethal. One example is an infection caused by the free-living ...

Is There Life Outside of Standard Deviations? Measuring Creativity in a Tests and Measurements Classroom.

ERIC Educational Resources Information Center

Demetrulias, Diana Mayer

1980-01-01

Even in an educational tests and measurements classroom it is possible to stimulate student creativity and divergent thinking. Examples of projects and test constructions are given to provide food for thought for the creative teacher. (JN)

78 FR 76344 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... environment and on which they may test their automated systems that integrate with the Exchange. For example... Establish Fees Under Rule 7030(d) for Use of the Carteret Testing Facility Test Environment December 11... the Testing Facility (``NTF'') test environment located in Carteret, New Jersey, which will provide a...

Chemical, Biological, and Radiological Contamination Survivability: Material Effects Testing

DTIC Science & Technology

2012-06-22

form that can be compared to pretest and posttest functional performance data. If Soldiers are desired, ensure a Test Schedule and Review Committee...test execution. f. The material’s performance specification should also be reviewed before planning test execution. For example , the...test data, and conformance with specified test and operating procedures cannot be overemphasized. 3.1 Test Planning. 3.1.1 Pretest Preparation

Group Differences in Test-Taking Behaviour: An Example from a High-Stakes Testing Program

ERIC Educational Resources Information Center

Stenlund, Tova; Eklöf, Hanna; Lyrén, Per-Erik

2017-01-01

This study investigated whether different groups of test-takers vary in their reported test-taking behaviour in a high-stakes test situation. A between-group design (N = 1129) was used to examine whether high and low achievers, as well as females and males, differ in their use of test-taking strategies, and in level of reported test anxiety and…

Can People With Intellectual Disability Resist Implications of Fault When Police Question Their Allegations of Sexual Assault and Rape?

PubMed

Antaki, Charles; Richardson, Emma; Stokoe, Elizabeth; Willott, Sara

2015-10-01

When people alleging sexual assault are interviewed by police, their accounts are tested to see if they would stand up in court. Some tests are in the form of tendentious questions carrying implications (e.g., that the sex was consensual) damaging to the complainant's allegation. In a qualitative analysis of 19 English police interviews with people with intellectual disability (ID) defined in a variety of ways, we show how people with ID deal with the pragmatic complexity of such tendentious questions. We give examples in which the complainants detect and resist the questions' damaging implications; but we focus on occasions when the complainants do not do so. We discuss the use of tendentious questions in the light of national United Kingdom guidelines on the treatment of vulnerable witnesses.

A hybrid localization technique for patient tracking.

PubMed

Rodionov, Denis; Kolev, George; Bushminkin, Kirill

2013-01-01

Nowadays numerous technologies are employed for tracking patients and assets in hospitals or nursing homes. Each of them has advantages and drawbacks. For example, WiFi localization has relatively good accuracy but cannot be used in case of power outage or in the areas with poor WiFi coverage. Magnetometer positioning or cellular network does not have such problems but they are not as accurate as localization with WiFi. This paper describes technique that simultaneously employs different localization technologies for enhancing stability and average accuracy of localization. The proposed algorithm is based on fingerprinting method paired with data fusion and prediction algorithms for estimating the object location. The core idea of the algorithm is technology fusion using error estimation methods. For testing accuracy and performance of the algorithm testing simulation environment has been implemented. Significant accuracy improvement was showed in practical scenarios.

Stability and delay sensitivity of neutral fractional-delay systems.

PubMed

Xu, Qi; Shi, Min; Wang, Zaihua

2016-08-01

This paper generalizes the stability test method via integral estimation for integer-order neutral time-delay systems to neutral fractional-delay systems. The key step in stability test is the calculation of the number of unstable characteristic roots that is described by a definite integral over an interval from zero to a sufficient large upper limit. Algorithms for correctly estimating the upper limits of the integral are given in two concise ways, parameter dependent or independent. A special feature of the proposed method is that it judges the stability of fractional-delay systems simply by using rough integral estimation. Meanwhile, the paper shows that for some neutral fractional-delay systems, the stability is extremely sensitive to the change of time delays. Examples are given for demonstrating the proposed method as well as the delay sensitivity.

A Box-Cox normal model for response times.

PubMed

Klein Entink, R H; van der Linden, W J; Fox, J-P

2009-11-01

The log-transform has been a convenient choice in response time modelling on test items. However, motivated by a dataset of the Medical College Admission Test where the lognormal model violated the normality assumption, the possibilities of the broader class of Box-Cox transformations for response time modelling are investigated. After an introduction and an outline of a broader framework for analysing responses and response times simultaneously, the performance of a Box-Cox normal model for describing response times is investigated using simulation studies and a real data example. A transformation-invariant implementation of the deviance information criterium (DIC) is developed that allows for comparing model fit between models with different transformation parameters. Showing an enhanced description of the shape of the response time distributions, its application in an educational measurement context is discussed at length.

An identification method for damping ratio in rotor systems

NASA Astrophysics Data System (ADS)

Wang, Weimin; Li, Qihang; Gao, Jinji; Yao, Jianfei; Allaire, Paul

2016-02-01

Centrifugal compressor testing with magnetic bearing excitations is the last step to assure the compressor rotordynamic stability in the designed operating conditions. To meet the challenges of stability evaluation, a new method combining the rational polynomials method (RPM) with the weighted instrumental variables (WIV) estimator to fit the directional frequency response function (dFRF) is presented. Numerical simulation results show that the method suggested in this paper can identify the damping ratio of the first forward and backward modes with high accuracy, even in a severe noise environment. Experimental tests were conducted to study the effect of different bearing configurations on the stability of rotor. Furthermore, two example centrifugal compressors (a nine-stage straight-through and a six-stage back-to-back) were employed to verify the feasibility of identification method in industrial configurations as well.

A Comparison of Simplified Two-dimensional Flow Models Exemplified by Water Flow in a Cavern

NASA Astrophysics Data System (ADS)

Prybytak, Dzmitry; Zima, Piotr

2017-12-01

The paper shows the results of a comparison of simplified models describing a two-dimensional water flow in the example of a water flow through a straight channel sector with a cavern. The following models were tested: the two-dimensional potential flow model, the Stokes model and the Navier-Stokes model. In order to solve the first two, the boundary element method was employed, whereas to solve the Navier-Stokes equations, the open-source code library OpenFOAM was applied. The results of numerical solutions were compared with the results of measurements carried out on a test stand in a hydraulic laboratory. The measurements were taken with an ADV probe (Acoustic Doppler Velocimeter). Finally, differences between the results obtained from the mathematical models and the results of laboratory measurements were analysed.

Two simple image slicers for high resolution spectroscopy

NASA Astrophysics Data System (ADS)

Tala, M.; Vanzi, L.; Avila, G.; Guirao, C.; Pecchioli, E.; Zapata, A.; Pieralli, F.

2017-04-01

We present the design, manufacturing, test and performance of two image slicers for high resolution spectroscopy. Based on the classical Bowen-Walraven concept, our slicers allow to make two slices of the image of the input fibre. We introduce the idea of a second fibre that can be cropped in half to reach the same width of the science target fibre and that can be used for simultaneous wavelength reference. The slicers presented are mirror and prism based, respectively. Both devices work within expectation, showing differences mainly in their efficiency. The prism based slicer is the solution that was adopted for the FIDEOS spectrograph, an instrument built by the AIUC for the ESO 1m telescope of La Silla. Test spectra obtained with this instrument are included as examples of a real application of the device.

[Theory of Mind in a child with autism: how to train her?].

PubMed

Martín García, María J; Gómez Becerra, Inmaculada; Garro Espín, María J

2012-11-01

Theory of Mind is a metacognitive skill that, in many cases, is deficient in autism. In this paper, we present a clinical study conducted with a child diagnosed with autism, which verifies the effectiveness of a training protocol testing false beliefs, which has been considered to measure the Theory of Mind. Basically, the protocol incorporates a number of verbal prompts (such as emphasizing the elements of the narratives that indicate situational or temporary changes), trains many examples, extending the tests incorporating some games with more familiar objects from the child's daily life, applies differential contingencies to discriminate right from wrong in each child's responses and provides descriptive feedback. The results show that the training protocol achieved the highest level of correct trials and the child generalizes the ability to take the perspective of her natural context.

Analysis of pilot control strategy

NASA Technical Reports Server (NTRS)

Heffley, R. K.; Hanson, G. D.; Jewell, W. F.; Clement, W. F.

1983-01-01

Methods for nonintrusive identification of pilot control strategy and task execution dynamics are presented along with examples based on flight data. The specific analysis technique is Nonintrusive Parameter Identification Procedure (NIPIP), which is described in a companion user's guide (NASA CR-170398). Quantification of pilot control strategy and task execution dynamics is discussed in general terms followed by a more detailed description of how NIPIP can be applied. The examples are based on flight data obtained from the NASA F-8 digital fly by wire airplane. These examples involve various piloting tasks and control axes as well as a demonstration of how the dynamics of the aircraft itself are identified using NIPIP. Application of NIPIP to the AFTI/F-16 flight test program is discussed. Recommendations are made for flight test applications in general and refinement of NIPIP to include interactive computer graphics.

Gene-gene-environment interactions between drugs, transporters, receptors, and metabolizing enzymes: Statins, SLCO1B1, and CYP3A4 as an example.

PubMed

Sadee, Wolfgang

2013-09-01

Pharmacogenetic biomarker tests include mostly specific single gene-drug pairs, capable of accounting for a portion of interindividual variability in drug response and toxicity. However, multiple genes are likely to contribute, either acting independently or epistatically, with the CYP2C9-VKORC1-warfarin test panel, an example of a clinically used gene-gene-dug interaction. I discuss here further instances of gene-gene-drug interactions, including a proposed dynamic effect on statin therapy by genetic variants in both a transporter (SLCO1B1) and a metabolizing enzyme (CYP3A4) in liver cells, the main target site where statins block cholesterol synthesis. These examples set a conceptual framework for developing diagnostic panels involving multiple gene-drug combinations. Copyright © 2013 Wiley Periodicals, Inc.

Addressing Learning Strategies for the Next Generation

NASA Astrophysics Data System (ADS)

Morris, P. A.; Reiff, P. H.; Sumners, C.

2009-12-01

Access to computers and interactive toys such as X Box have had impacts on learning strategies. New types of simulations and entertainment approaches will be increasingly important to reach out and encourage careers in science, technology, engineering and math (STEM) disciplines including space science. Examples of effective tools are planetarium shows and CD’s and DVD’s that can be distributed to teachers, students and the general public. Planetarium shows are no longer restricted to fixed dome venues but are increasingly being adapted to portable domes that have the advantage of transporting the activity to a school, community event or neighborhood center. Groups of individuals who may not normally consider a planetarium show as a family or group event are exposed to a learning experience which is also entertaining. Selected planetarium shows are available in languages other than English, including Spanish. Hands-on interactive activities are available that will enhance the experience of the attendees. Pre and post testing have shown [Sumners et al., 2006, 2008] that these activities are effective for improving STEM knowledge. New planetarium technology includes using a Wii controller for navigating through buildings. These so far have been applied to games but could be applied to a virtual tour of the space station, for example. CD’s and DVD’s are important for augmenting the activities of the planetarium shows as they provide additional learning activities that can be used either in the home, the classroom or as an enhancement for planetarium events. Simulations on the Sun, planetary or solar events, related games such as TIC TAC TOE are easily incorporated. It is important to provide additional support for the teachers that will enable them to incorporate the data into their curriculum and state mandated achievement levels.

Limit Cycle Analysis Applied to the Oscillations of Decelerating Blunt-Body Entry Vehicles

NASA Technical Reports Server (NTRS)

Schoenenberger, Mark; Queen, Eric M.

2008-01-01

Many blunt-body entry vehicles have nonlinear dynamic stability characteristics that produce self-limiting oscillations in flight. Several different test techniques can be used to extract dynamic aerodynamic coefficients to predict this oscillatory behavior for planetary entry mission design and analysis. Most of these test techniques impose boundary conditions that alter the oscillatory behavior from that seen in flight. Three sets of test conditions, representing three commonly used test techniques, are presented to highlight these effects. Analytical solutions to the constant-coefficient planar equations-of-motion for each case are developed to show how the same blunt body behaves differently depending on the imposed test conditions. The energy equation is applied to further illustrate the governing dynamics. Then, the mean value theorem is applied to the energy rate equation to find the effective damping for an example blunt body with nonlinear, self-limiting dynamic characteristics. This approach is used to predict constant-energy oscillatory behavior and the equilibrium oscillation amplitudes for the various test conditions. These predictions are verified with planar simulations. The analysis presented provides an overview of dynamic stability test techniques and illustrates the effects of dynamic stability, static aerodynamics and test conditions on observed dynamic motions. It is proposed that these effects may be leveraged to develop new test techniques and refine test matrices in future tests to better define the nonlinear functional forms of blunt body dynamic stability curves.

TRANSPORT

EPA Science Inventory

Presentation outline: transport principles, effective solubility; gasoline composition; and field examples (plume diving).
Presentation conclusions: MTBE transport follows from - phyiscal and chemical properties and hydrology. Field examples show: MTBE plumes > benzene plu...

Surprise! Infants consider possible bases of generalization for a single input example.

PubMed

Gerken, LouAnn; Dawson, Colin; Chatila, Razanne; Tenenbaum, Josh

2015-01-01

Infants have been shown to generalize from a small number of input examples. However, existing studies allow two possible means of generalization. One is via a process of noting similarities shared by several examples. Alternatively, generalization may reflect an implicit desire to explain the input. The latter view suggests that generalization might occur when even a single input example is surprising, given the learner's current model of the domain. To test the possibility that infants are able to generalize based on a single example, we familiarized 9-month-olds with a single three-syllable input example that contained either one surprising feature (syllable repetition, Experiment 1) or two features (repetition and a rare syllable, Experiment 2). In both experiments, infants generalized only to new strings that maintained all of the surprising features from familiarization. This research suggests that surprise can promote very rapid generalization. © 2014 John Wiley & Sons Ltd.

Shortcuts for Pilot Testing Instructional Materials.

ERIC Educational Resources Information Center

Howe, R. John; Pearlstein, Gloria

1995-01-01

A mini-pilot test was conducted by the Department of Labor's Employment Standards Administration to develop training on enforcing the Federal Family and Medical Leave Act. The situation that necessitated the test is presented; mini-pilot test examples are explained; and pros and cons of the mini-pilots are examined. A sidebar contains suggestions…

Determining the Overall Impact of Interruptions during Online Testing

ERIC Educational Resources Information Center

Sinharay, Sandip; Wan, Ping; Whitaker, Mike; Kim, Dong-In; Zhang, Litong; Choi, Seung W.

2014-01-01

With an increase in the number of online tests, interruptions during testing due to unexpected technical issues seem unavoidable. For example, interruptions occurred during several recent state tests. When interruptions occur, it is important to determine the extent of their impact on the examinees' scores. There is a lack of research on this…

Application of Bayesian Methods for Detecting Fraudulent Behavior on Tests

ERIC Educational Resources Information Center

Sinharay, Sandip

2018-01-01

Producers and consumers of test scores are increasingly concerned about fraudulent behavior before and during the test. There exist several statistical or psychometric methods for detecting fraudulent behavior on tests. This paper provides a review of the Bayesian approaches among them. Four hitherto-unpublished real data examples are provided to…

Observed-Score Equating as a Test Assembly Problem.

ERIC Educational Resources Information Center

van der Linden, Wim J.; Luecht, Richard M.

1998-01-01

Derives a set of linear conditions of item-response functions that guarantees identical observed-score distributions on two test forms. The conditions can be added as constraints to a linear programming model for test assembly. An example illustrates the use of the model for an item pool from the Law School Admissions Test (LSAT). (SLD)

The Third Edition of the Test of Understanding in College Economics.

ERIC Educational Resources Information Center

Saunders, Phillip

1991-01-01

Discusses the content and cognitive specification of the third edition of the Test of Understanding in College Economics. Presents examples of the construction and sampling criteria employed in the latest and previous versions of the test. Explains that the test emphasizes recognition and understanding of basic terms, concepts, and principles with…

Verification of performance specifications of a molecular test: cystic fibrosis carrier testing using the Luminex liquid bead array.

PubMed

Lacbawan, Felicitas L; Weck, Karen E; Kant, Jeffrey A; Feldman, Gerald L; Schrijver, Iris

2012-01-01

The number of clinical laboratories introducing various molecular tests to their existing test menu is continuously increasing. Prior to offering a US Food and Drug Administration-approved test, it is necessary that performance characteristics of the test, as claimed by the company, are verified before the assay is implemented in a clinical laboratory. To provide an example of the verification of a specific qualitative in vitro diagnostic test: cystic fibrosis carrier testing using the Luminex liquid bead array (Luminex Molecular Diagnostics, Inc, Toronto, Ontario). The approach used by an individual laboratory for verification of a US Food and Drug Administration-approved assay is described. Specific verification data are provided to highlight the stepwise verification approach undertaken by a clinical diagnostic laboratory. Protocols for verification of in vitro diagnostic assays may vary between laboratories. However, all laboratories must verify several specific performance specifications prior to implementation of such assays for clinical use. We provide an example of an approach used for verifying performance of an assay for cystic fibrosis carrier screening.

Promoting College Students' Problem Understanding Using Schema-Emphasizing Worked Examples

ERIC Educational Resources Information Center

Yan, Jie; Lavigne, Nancy C.

2014-01-01

Statistics learners often bypass the critical step of understanding a problem before executing solutions. Worked-out examples that identify problem information (e.g., data type, number of groups, purpose of analysis) key to determining a solution (e.g., "t" test, chi-square, correlation) can address this concern. The authors examined the…

26 CFR 1.460-0 - Outline of regulations under section 460.

Code of Federal Regulations, 2014 CFR

2014-04-01

...) Examples. § 1.460-2Long-term manufacturing contracts. (a) In general. (b) Unique. (1) In general. (2) Safe... complete. (1) In general. (2) Production by related parties. (d) Qualified ship contracts. (e) Examples... improvements. (iv) Mixed use costs. (3) $10,000,000 gross receipts test. (i) In general. (ii) Single employer...

26 CFR 1.460-0 - Outline of regulations under section 460.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) Examples. § 1.460-2Long-term manufacturing contracts. (a) In general. (b) Unique. (1) In general. (2) Safe... complete. (1) In general. (2) Production by related parties. (d) Qualified ship contracts. (e) Examples... improvements. (iv) Mixed use costs. (3) $10,000,000 gross receipts test. (i) In general. (ii) Single employer...

26 CFR 1.460-0 - Outline of regulations under section 460.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Examples. § 1.460-2Long-term manufacturing contracts. (a) In general. (b) Unique. (1) In general. (2) Safe... complete. (1) In general. (2) Production by related parties. (d) Qualified ship contracts. (e) Examples... improvements. (iv) Mixed use costs. (3) $10,000,000 gross receipts test. (i) In general. (ii) Single employer...

26 CFR 1.460-0 - Outline of regulations under section 460.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Examples. § 1.460-2Long-term manufacturing contracts. (a) In general. (b) Unique. (1) In general. (2) Safe... complete. (1) In general. (2) Production by related parties. (d) Qualified ship contracts. (e) Examples... improvements. (iv) Mixed use costs. (3) $10,000,000 gross receipts test. (i) In general. (ii) Single employer...

10 CFR 170.21 - Schedule of fees for production and utilization facilities, review of standard referenced design...

Code of Federal Regulations, 2012 CFR

2012-01-01

..., Certification Full cost. Amendment, Renewal, Other Approvals Full cost. C. Test Facility/Research Reactor... of components requiring Commission and Executive Branch review, for example, actions under 10 CFR 110... export of reactor and other components requiring Executive Branch review, for example, those actions...

How to find nothing.

PubMed

Hemenway, David

2009-09-01

Hypothesis testing can be misused and misinterpreted in various ways. Limitations in the research design, for example, can make it almost impossible to reject the null hypothesis that a policy has no effect. This article discusses two examples of such experimental designs and analyses, in which, unfortunately, the researchers touted their null results as strong evidence of no effect.

Technologies for Language Assessment.

ERIC Educational Resources Information Center

Burstein, Jill; And Others

1996-01-01

Reviews current and developing technology uses that are relevant to language assessment and discusses examples of recent linguistic applications from the laboratory at the Educational Testing Service. The processes of language test development are described and the functions they serve from the perspective of a large testing organization are…

16 CFR 1633.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... confirmation test on the mattress set it manufactures. (r) Confirmation test means a pre-market test conducted... included; examples are convertible sofa bed mattresses, corner group mattresses, day bed mattresses, roll...) This term includes any one, or any combination of the following: replacing the ticking or batting...

16 CFR 1633.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... confirmation test on the mattress set it manufactures. (r) Confirmation test means a pre-market test conducted... included; examples are convertible sofa bed mattresses, corner group mattresses, day bed mattresses, roll...) This term includes any one, or any combination of the following: replacing the ticking or batting...

16 CFR 1633.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... confirmation test on the mattress set it manufactures. (r) Confirmation test means a pre-market test conducted... included; examples are convertible sofa bed mattresses, corner group mattresses, day bed mattresses, roll...) This term includes any one, or any combination of the following: replacing the ticking or batting...

16 CFR 1633.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... confirmation test on the mattress set it manufactures. (r) Confirmation test means a pre-market test conducted... included; examples are convertible sofa bed mattresses, corner group mattresses, day bed mattresses, roll...) This term includes any one, or any combination of the following: replacing the ticking or batting...

16 CFR § 1633.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... confirmation test on the mattress set it manufactures. (r) Confirmation test means a pre-market test conducted... included; examples are convertible sofa bed mattresses, corner group mattresses, day bed mattresses, roll...) This term includes any one, or any combination of the following: replacing the ticking or batting...

Use of Pearson's Chi-Square for Testing Equality of Percentile Profiles across Multiple Populations.

PubMed

Johnson, William D; Beyl, Robbie A; Burton, Jeffrey H; Johnson, Callie M; Romer, Jacob E; Zhang, Lei

2015-08-01

In large sample studies where distributions may be skewed and not readily transformed to symmetry, it may be of greater interest to compare different distributions in terms of percentiles rather than means. For example, it may be more informative to compare two or more populations with respect to their within population distributions by testing the hypothesis that their corresponding respective 10 th , 50 th , and 90 th percentiles are equal. As a generalization of the median test, the proposed test statistic is asymptotically distributed as Chi-square with degrees of freedom dependent upon the number of percentiles tested and constraints of the null hypothesis. Results from simulation studies are used to validate the nominal 0.05 significance level under the null hypothesis, and asymptotic power properties that are suitable for testing equality of percentile profiles against selected profile discrepancies for a variety of underlying distributions. A pragmatic example is provided to illustrate the comparison of the percentile profiles for four body mass index distributions.

Development of NASA's Sample Cartridge Assembly: Design, Thermal Analysis, and Testing

NASA Technical Reports Server (NTRS)

O'Connor, Brian; Hernandez, Deborah; Duffy, James

2015-01-01

NASA's Sample Cartridge Assembly (SCA) project is responsible for designing and validating a payload that contains a materials research sample in a sealed environment. The SCA will be heated in the European Space Agency's (ESA) Low Gradient Furnace (LGF) that is housed inside the Material Science Research Rack (MSRR) located in the International Space Station (ISS). Sintered metals and crystal growth experiments in microgravity are examples of some of the types of materials research that may be performed with a SCA. The project's approach has been to use thermal models to guide the SCA through several design iterations. Various layouts of the SCA components were explored to meet the science and engineering requirements, and testing has been done to help prove the design. This paper will give an overview of the SCA design. It will show how thermal analysis is used to support the project. Also some testing that has been completed will also be discussed, including changes that were made to the thermal profile used during brazing.

Evaluation of Mobile Phone Interference With Aircraft GPS Navigation Systems

NASA Technical Reports Server (NTRS)

Pace, Scott; Oria, A. J.; Guckian, Paul; Nguyen, Truong X.

2004-01-01

This report compiles and analyzes tests that were conducted to measure cell phone spurious emissions in the Global Positioning System (GPS) radio frequency band that could affect the navigation system of an aircraft. The cell phone in question had, as reported to the FAA (Federal Aviation Administration), caused interference to several GPS receivers on-board a small single engine aircraft despite being compliant with data filed at the time with the FCC by the manufacturer. NASA (National Aeronautics and Space Administration) and industry tests show that while there is an emission in the 1575 MHz GPS band due to a specific combination of amplifier output impedance and load impedance that induces instability in the power amplifier, these spurious emissions (i.e., not the intentional transmit signal) are similar to those measured on non-intentionally transmitting devices such as, for example, laptop computers. Additional testing on a wide sample of different commercial cell phones did not result in any emission in the 1575 MHz GPS Band above the noise floor of the measurement receiver.

Cycling Performance of a Columnar-Structured Complex Perovskite in a Temperature Gradient Test

NASA Astrophysics Data System (ADS)

Schlegel, N.; Sebold, D.; Sohn, Y. J.; Mauer, G.; Vaßen, R.

2015-10-01

To increase the efficiency of turbines for the power generation and the aircraft industry, advanced thermal barrier coatings (TBCs) are required. They need to be long-term stable at temperatures higher than 1200 °C. Nowadays, yttria partially stabilized zirconia (YSZ) is applied as standard TBC material. But its long-term application at temperatures higher than 1200 °C leads to detrimental phase changes and sintering effects. Therefore, new materials have to be investigated, for example, complex perovskites. They provide high melting points, high thermal expansion coefficients and thermal conductivities of approx. 2.0 W/(m K). In this work, the complex perovskite La(Al1/4Mg1/2Ta1/4)O3 (LAMT) was investigated. It was deposited by the suspension plasma spraying (SPS) process, resulting in a columnar microstructure of the coating. The coatings were tested in thermal cycling gradient tests and they show excellent results, even though some phase decomposition was found.

Private traits and attributes are predictable from digital records of human behavior.

PubMed

Kosinski, Michal; Stillwell, David; Graepel, Thore

2013-04-09

We show that easily accessible digital records of behavior, Facebook Likes, can be used to automatically and accurately predict a range of highly sensitive personal attributes including: sexual orientation, ethnicity, religious and political views, personality traits, intelligence, happiness, use of addictive substances, parental separation, age, and gender. The analysis presented is based on a dataset of over 58,000 volunteers who provided their Facebook Likes, detailed demographic profiles, and the results of several psychometric tests. The proposed model uses dimensionality reduction for preprocessing the Likes data, which are then entered into logistic/linear regression to predict individual psychodemographic profiles from Likes. The model correctly discriminates between homosexual and heterosexual men in 88% of cases, African Americans and Caucasian Americans in 95% of cases, and between Democrat and Republican in 85% of cases. For the personality trait "Openness," prediction accuracy is close to the test-retest accuracy of a standard personality test. We give examples of associations between attributes and Likes and discuss implications for online personalization and privacy.

Forces required for a knife to penetrate a variety of clothing types.

PubMed

Nolan, Gary; Hainsworth, Sarah V; Rutty, Guy N

2013-03-01

In stabbing incidents, it is usual for the victim to be clothed and therefore a knife penetrates both clothes and skin. Clothes (other than leather) have been thought to make little difference to the penetration force. However, there is little quantitative data in the literature. In this study, a range of clothes have been tested, either singly or in layers of, for example, T-shirt and shirt, to quantify the additional force required when clothes are present. A materials testing system has been used to test the penetration force required to stab through clothes into a foam-silicone rubber skin simulant. The results show that the force required can be significantly different, particularly when layers of clothing are penetrated. A cotton t-shirt adds c. 8 N to the penetration force, while a T-shirt and jacket can add an additional 21 N. The results allow a more quantitative assessment of forces required in stabbing. © 2012 American Academy of Forensic Sciences.

Optimization and application of blasting parameters based on the "pushing-wall" mechanism

NASA Astrophysics Data System (ADS)

Ren, Feng-yu; Sow, Thierno Amadou Mouctar; He, Rong-xing; Liu, Xin-rui

2012-10-01

The large structure parameter of a sublevel caving method was used in Beiminghe iron mine. The ores were generally lower than the medium hardness and easy to be drilled and blasted. However, the questions of boulder yield, "pushing-wall" accident rate, and brow damage rate were not effectively controlled in practical blasting. The model test of a similar material shows that the charge concentration of bottom blastholes in the sector is too high; the pushing wall is the fundamental reason for the poor blasting effect. One of the main methods to adjust the explosive distribution is to increase the length of charged blastholes. Therefore, the field tests with respect to increasing the length of uncharged blastholes were made in 12# stope of -95 subsection and 6# stope of Beiminghe iron mine. This paper took the test result of 12# stope as an example to analyze the impact of charge structure on blasting effect and design an appropriate blasting parameter that is to similar to No.12 stope.