49 CFR Appendix E to Part 240 - Recommended Procedures for Conducting Skill Performance Tests
Code of Federal Regulations, 2011 CFR
2011-10-01
... 49 Transportation 4 2011-10-01 2011-10-01 false Recommended Procedures for Conducting Skill... LOCOMOTIVE ENGINEERS Pt. 240, App. E Appendix E to Part 240—Recommended Procedures for Conducting Skill Performance Tests FRA requires (see § 240.127 and § 240.211) that locomotive engineers be given a skill...
Standardization of carbon-phenolic composite test methodology
NASA Technical Reports Server (NTRS)
Hall, W. B.
1986-01-01
The objective of this study was to evaluate the residual volatiles, filler content, and resin flow test procedures for carbon-phenolic prepreg materials. The residual volatile test procedure was rewritten with tighter procedure control which was then evaluated by round robin testing by four laboratories on the same rolls of prepreg. Results indicated that the residual volatiles test was too operator and equipment dependent to be reliable, and it was recommended that the test be discontinued. The resin flow test procedures were rewritten with tighter procedure control, and it is now considered to be an acceptable test. It was recommended that the filler content determination be made prior to prepregging.
Code of Federal Regulations, 2010 CFR
2010-01-01
... the polymerase chain reaction (PCR) test for Mycoplasma gallisepticum and M. synoviae. 147.30 Section... Examination Procedures § 147.30 Laboratory procedure recommended for the polymerase chain reaction (PCR) test... should consist of the following sequences: ER12JA07.005 (c) Polymerase chain reaction. (1) Treat each...
Code of Federal Regulations, 2011 CFR
2011-01-01
... the polymerase chain reaction (PCR) test for Mycoplasma gallisepticum and M. synoviae. 147.30 Section... Examination Procedures § 147.30 Laboratory procedure recommended for the polymerase chain reaction (PCR) test... should consist of the following sequences: ER12JA07.005 (c) Polymerase chain reaction. (1) Treat each...
Recommended procedures for measuring aircraft noise and associated parameters
NASA Technical Reports Server (NTRS)
Marsh, A. H.
1977-01-01
Procedures are recommended for obtaining experimental values of aircraft flyover noise levels (and associated parameters). Specific recommendations are made for test criteria, instrumentation performance requirements, data-acquisition procedures, and test operations. The recommendations are based on state-of-the-art measurement capabilities available in 1976 and are consistent with the measurement objectives of the NASA Aircraft Noise Prediction Program. The recommendations are applicable to measurements of the noise produced by an airplane flying subsonically over (or past) microphones located near the surface of the ground. Aircraft types covered by the recommendations are fixed-wing airplanes powered by turbojet or turbofan engines and using conventional aerodynamic means for takeoff and landing. Various assumptions with respect to subsequent data processing and analysis were made (and are described) and the recommended measurement procedures are compatible with the assumptions. Some areas where additional research is needed relative to aircraft flyover noise measurement techniques are also discussed.
Code of Federal Regulations, 2014 CFR
2014-01-01
... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...
Code of Federal Regulations, 2013 CFR
2013-01-01
... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...
Code of Federal Regulations, 2012 CFR
2012-01-01
... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...
Code of Federal Regulations, 2010 CFR
2010-01-01
... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction... lp gene. (c) MGLP ReTi. Primers and probe should be utilized in a 25 µl reaction containing 12.5 µl...
Code of Federal Regulations, 2011 CFR
2011-01-01
... the real-time polymerase chain reaction test for Mycoplasma gallisepticum (MGLP ReTi). 147.31 Section... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction... lp gene. (c) MGLP ReTi. Primers and probe should be utilized in a 25 µl reaction containing 12.5 µl...
40 CFR 89.408 - Post-test procedures.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Post-test procedures. 89.408 Section... Procedures § 89.408 Post-test procedures. (a) A hangup check is recommended at the completion of the last...) Record the post-test data specified in § 89.405(f). (e) For a valid test, the zero and span checks...
40 CFR 89.408 - Post-test procedures.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 21 2013-07-01 2013-07-01 false Post-test procedures. 89.408 Section... Procedures § 89.408 Post-test procedures. (a) A hangup check is recommended at the completion of the last...) Record the post-test data specified in § 89.405(f). (e) For a valid test, the zero and span checks...
40 CFR 89.408 - Post-test procedures.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Post-test procedures. 89.408 Section... Procedures § 89.408 Post-test procedures. (a) A hangup check is recommended at the completion of the last...) Record the post-test data specified in § 89.405(f). (e) For a valid test, the zero and span checks...
40 CFR 89.408 - Post-test procedures.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 21 2012-07-01 2012-07-01 false Post-test procedures. 89.408 Section... Procedures § 89.408 Post-test procedures. (a) A hangup check is recommended at the completion of the last...) Record the post-test data specified in § 89.405(f). (e) For a valid test, the zero and span checks...
40 CFR 89.408 - Post-test procedures.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 20 2014-07-01 2013-07-01 true Post-test procedures. 89.408 Section 89... Procedures § 89.408 Post-test procedures. (a) A hangup check is recommended at the completion of the last...) Record the post-test data specified in § 89.405(f). (e) For a valid test, the zero and span checks...
Pei, Yanbo; Tian, Guo-Liang; Tang, Man-Lai
2014-11-10
Stratified data analysis is an important research topic in many biomedical studies and clinical trials. In this article, we develop five test statistics for testing the homogeneity of proportion ratios for stratified correlated bilateral binary data based on an equal correlation model assumption. Bootstrap procedures based on these test statistics are also considered. To evaluate the performance of these statistics and procedures, we conduct Monte Carlo simulations to study their empirical sizes and powers under various scenarios. Our results suggest that the procedure based on score statistic performs well generally and is highly recommended. When the sample size is large, procedures based on the commonly used weighted least square estimate and logarithmic transformation with Mantel-Haenszel estimate are recommended as they do not involve any computation of maximum likelihood estimates requiring iterative algorithms. We also derive approximate sample size formulas based on the recommended test procedures. Finally, we apply the proposed methods to analyze a multi-center randomized clinical trial for scleroderma patients. Copyright © 2014 John Wiley & Sons, Ltd.
Recommendations for field measurements of aircraft noise
NASA Technical Reports Server (NTRS)
Marsh, A. H.
1982-01-01
Specific recommendations for environmental test criteria, data acquisition procedures, and instrument performance requirements for measurement of noise levels produced by aircraft in flight are provided. Recommendations are also given for measurement of associated airplane and engine parameters and atmospheric conditions. Recommendations are based on capabilities which were available commercially in 1981; they are applicable to field tests of aircraft flying subsonically past microphones located near the surface of the ground either directly under or to the side of a flight path. Aircraft types covered by the recommendations include fixed-wing airplanes powered by turbojet or turbofan engines or by propellers. The recommended field-measurement procedures are consistent with assumed requirements for data processing and analysis.
Code of Federal Regulations, 2013 CFR
2013-07-01
... to the vacuum unit to achieve full diaphragm displacement. Seal vacuum source to unit. There shall be no visible loss of diaphragm displacement or drop in vacuum gauge reading after a 15 second observation. Vacuum purge system and diaphragm displacement adjusting screw holes should be temporarily sealed...
Code of Federal Regulations, 2011 CFR
2011-07-01
... to the vacuum unit to achieve full diaphragm displacement. Seal vacuum source to unit. There shall be no visible loss of diaphragm displacement or drop in vacuum gauge reading after a 15 second observation. Vacuum purge system and diaphragm displacement adjusting screw holes should be temporarily sealed...
Code of Federal Regulations, 2012 CFR
2012-07-01
... to the vacuum unit to achieve full diaphragm displacement. Seal vacuum source to unit. There shall be no visible loss of diaphragm displacement or drop in vacuum gauge reading after a 15 second observation. Vacuum purge system and diaphragm displacement adjusting screw holes should be temporarily sealed...
Code of Federal Regulations, 2014 CFR
2014-07-01
... to the vacuum unit to achieve full diaphragm displacement. Seal vacuum source to unit. There shall be no visible loss of diaphragm displacement or drop in vacuum gauge reading after a 15 second observation. Vacuum purge system and diaphragm displacement adjusting screw holes should be temporarily sealed...
Code of Federal Regulations, 2010 CFR
2010-07-01
... to the vacuum unit to achieve full diaphragm displacement. Seal vacuum source to unit. There shall be no visible loss of diaphragm displacement or drop in vacuum gauge reading after a 15 second observation. Vacuum purge system and diaphragm displacement adjusting screw holes should be temporarily sealed...
Acmg Board Of Directors
2017-07-01
Disclaimer: These recommendations are designed primarily as an educational resource for medical geneticists and other health-care providers, to help them provide quality medical genetic services. Adherence to these recommendations does not necessarily assure a successful medical outcome. These recommendations should not be considered inclusive of all proper procedures and tests or exclusive of other procedures and tests that are reasonably directed to obtaining the same results. In determining the propriety of any specific procedure or test, the geneticist should apply his or her own professional judgment to the specific clinical circumstances presented by the individual patient or specimen. It may be prudent, however, to document in the patient's record the rationale for any significant deviation from these recommendations.Genet Med advance online publication 05 January 2017.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gettings, M.B.
A blower-door-directed infiltration retrofit procedure was field tested on 18 homes in south central Wisconsin. The procedure, developed by the Wisconsin Energy Conservation Corporation, includes recommended retrofit techniques as well as criteria for estimating the amount of cost-effective work to be performed on a house. A recommended expenditure level and target air leakage reduction, in air changes per hour at 50 Pascal (ACH50), are determined from the initial leakage rate measured. The procedure produced an average 16% reduction in air leakage rate. For the 7 houses recommended for retrofit, 89% of the targeted reductions were accomplished with 76% of themore » recommended expenditures. The average cost of retrofits per house was reduced by a factor of four compared with previous programs. The average payback period for recommended retrofits was 4.4 years, based on predicted energy savings computed from achieved air leakage reductions. Although exceptions occurred, the procedure's 8 ACH50 minimum initial leakage rate for advising retrofits to be performed appeared a good choice, based on cost-effective air leakage reduction. Houses with initial rates of 7 ACH50 or below consistently required substantially higher costs to achieve significant air leakage reductions. No statistically significant average annual energy savings was detected as a result of the infiltration retrofits. Average measured savings were -27 therm per year, indicating an increase in energy use, with a 90% confidence interval of 36 therm. Measured savings for individual houses varied widely in both positive and negative directions, indicating that factors not considered affected the results. Large individual confidence intervals indicate a need to increase the accuracy of such measurements as well as understand the factors which may cause such disparity. Recommendations for the procedure include more extensive training of retrofit crews, checks for minimum air exchange rates to insure air quality, and addition of the basic cost of determining the initial leakage rate to the recommended expenditure level. Recommendations for the field test of the procedure include increasing the number of houses in the sample, more timely examination of metered data to detect anomalies, and the monitoring of indoor air temperature. Though not appropriate in a field test of a procedure, further investigation into the effects of air leakage rate reductions on heating loads needs to be performed.« less
Candidate CDTI procedures study
NASA Technical Reports Server (NTRS)
Ace, R. E.
1981-01-01
A concept with potential for increasing airspace capacity by involving the pilot in the separation control loop is discussed. Some candidate options are presented. Both enroute and terminal area procedures are considered and, in many cases, a technologically advanced Air Traffic Control structure is assumed. Minimum display characteristics recommended for each of the described procedures are presented. Recommended sequencing of the operational testing of each of the candidate procedures is presented.
Alternatives to the sequential lineup: the importance of controlling the pictures.
Lindsay, R C; Bellinger, K
1999-06-01
Because sequential lineups reduce false-positive choices, their use has been recommended (R. C. L. Lindsay, 1999; R. C. L. Lindsay & G. L. Wells, 1985). Blind testing is included in the recommended procedures. Police, concerned about blind testing, devised alternative procedures, including self-administered sequential lineups, to reduce use of relative judgments (G. L. Wells, 1984) while permitting the investigating officer to conduct the procedure. Identification data from undergraduates exposed to a staged crime (N = 165) demonstrated that 4 alternative identification procedures tested were less effective than the original sequential lineup. Allowing witnesses to control the photographs resulted in higher rates of false-positive identification. Self-reports of using relative judgments were shown to be postdictive of decision accuracy.
French consensus procedure for assessing cognitive function in Parkinson's disease.
Dujardin, K; Auzou, N; Lhommée, E; Czernecki, V; Dubois, B; Fradet, A; Maltete, D; Meyer, M; Pineau, F; Schmitt, E; Sellal, F; Tison, F; Vidal, T; Azulay, J-P; Welter, M-L; Corvol, J-C; Durif, F; Rascol, O
2016-11-01
One of the objectives of the French expert centers for Parkinson's disease (NS-Park) network was to determine a consensus procedure for assessing cognitive function in patients with Parkinson's. This article presents this procedure and briefly describes the selected tests. A group of 13 experts used the Delphi method for consensus building to define the overall structure and components of the assessment procedure. For inclusion in the battery, tests had to be validated in the French language, require little motor participation, have normative data and be recognized by the international community. Experimental tasks and tests requiring specific devices were excluded. Two possibilities were identified, depending on whether an abbreviated or comprehensive assessment of cognitive function was necessary. For an abbreviated assessment, the experts recommended the Montreal Cognitive Assessment (MoCA) as a screening test for cognitive impairment or dementia. For a comprehensive neuropsychological assessment, the experts recommended assessing global efficiency plus the five main cognitive domains (attention and working memory, executive function, episodic memory, visuospatial function and language) that may be impaired in Parkinson's disease, using two tests for each domain. A common procedure for assessing cognitive function is now available across the French network dedicated to Parkinson's disease, and is recommended for both research and clinical practice. It will also help to promote standardization of the neuropsychological assessment of Parkinson's disease. Copyright © 2016 Elsevier Masson SAS. All rights reserved.
NASA Technical Reports Server (NTRS)
Diorio, Kimberly A.
2002-01-01
A process task analysis effort was undertaken by Dynacs Inc. commencing in June 2002 under contract from NASA YA-D6. Funding was provided through NASA's Ames Research Center (ARC), Code M/HQ, and Industrial Engineering and Safety (IES). The John F. Kennedy Space Center (KSC) Engineering Development Contract (EDC) Task Order was 5SMA768. The scope of the effort was to conduct a Human Factors Process Failure Modes and Effects Analysis (HF PFMEA) of a hazardous activity and provide recommendations to eliminate or reduce the effects of errors caused by human factors. The Liquid Oxygen (LOX) Pump Acceptance Test Procedure (ATP) was selected for this analysis. The HF PFMEA table (see appendix A) provides an analysis of six major categories evaluated for this study. These categories include Personnel Certification, Test Procedure Format, Test Procedure Safety Controls, Test Article Data, Instrumentation, and Voice Communication. For each specific requirement listed in appendix A, the following topics were addressed: Requirement, Potential Human Error, Performance-Shaping Factors, Potential Effects of the Error, Barriers and Controls, Risk Priority Numbers, and Recommended Actions. This report summarizes findings and gives recommendations as determined by the data contained in appendix A. It also includes a discussion of technology barriers and challenges to performing task analyses, as well as lessons learned. The HF PFMEA table in appendix A recommends the use of accepted and required safety criteria in order to reduce the risk of human error. The items with the highest risk priority numbers should receive the greatest amount of consideration. Implementation of the recommendations will result in a safer operation for all personnel.
49 CFR Appendix E to Part 240 - Recommended Procedures for Conducting Skill Performance Tests
Code of Federal Regulations, 2010 CFR
2010-10-01
... tailor their testing procedures to the specific operational realities. This appendix contains FRA's..., headlight? —Couple to cars at a safe speed? —Properly control in train slack and buff forces? —Properly use...
Development of Cold-Formed Steel Seismic Design Recommendations
2015-08-01
applied loads, so the impact on design would be minimal. However, had the test been carried out to larger panel deformations without loss of capacity... test shear panels and development of preliminary design recommendations 6. Definition of material properties and coupon test results 7. Pretest of...predicted panel response based on preliminary design model and coupon test results 8. Definition of test configuration, procedures, and
75 FR 4823 - Proposed Data Collections Submitted for Public Comment and Recommendations
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-29
... Prevention (CDC). Background and Brief Description Colorectal cancer (CRC) is the second leading cause of... procedures currently recommended as colorectal cancer screening tests, provide direct visualization of the... early cancers. Both of these tests require specialized training. Flexible sigmoidoscopy provides a view...
Calfee, M. Worth; Tufts, Jenia; Meyer, Kathryn; McConkey, Katrina; Mickelsen, Leroy; Rose, Laura; Dowell, Chad; Delaney, Lisa; Weber, Angela; Morse, Stephen; Chaitram, Jasmine; Gray, Marshall
2016-01-01
Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration. PMID:27362274
Calfee, M Worth; Tufts, Jenia; Meyer, Kathryn; McConkey, Katrina; Mickelsen, Leroy; Rose, Laura; Dowell, Chad; Delaney, Lisa; Weber, Angela; Morse, Stephen; Chaitram, Jasmine; Gray, Marshall
2016-12-01
Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures. Both decontamination procedures were quantitatively evaluated on three types of sample packaging materials (corrugated fiberboard, polystyrene foam, and polyethylene plastic), and two contamination mechanisms (wet or dry inoculums). Contaminant transfer results suggested that size-appropriate gloves should be worn by personnel, templates should not be taped to or removed from surfaces, and primary receptacles should be selected carefully. The decontamination tests indicated that wipe-based decontamination procedures may be more effective than spray-based procedures; efficacy was not influenced by material type but was affected by the inoculation method. Incomplete surface decontamination was observed in all tests with dry inoculums. This study provides a foundation for optimizing current B. anthracis response procedures to minimize contaminant exfiltration.
Evaluation of standardized sample collection, packaging, and ...
Journal Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures.
Guidelines for testing and release procedures
NASA Technical Reports Server (NTRS)
Molari, R.; Conway, M.
1984-01-01
Guidelines and procedures are recommended for the testing and release of the types of computer software efforts commonly performed at NASA/Ames Research Center. All recommendations are based on the premise that testing and release activities must be specifically selected for the environment, size, and purpose of each individual software project. Guidelines are presented for building a Test Plan and using formal Test Plan and Test Care Inspections on it. Frequent references are made to NASA/Ames Guidelines for Software Inspections. Guidelines are presented for selecting an Overall Test Approach and for each of the four main phases of testing: (1) Unit Testing of Components, (2) Integration Testing of Components, (3) System Integration Testing, and (4) Acceptance Testing. Tools used for testing are listed, including those available from operating systems used at Ames, specialized tools which can be developed, unit test drivers, stub module generators, and the use of format test reporting schemes.
Pernambuco, Leandro; Espelt, Albert; Magalhães, Hipólito Virgílio; Lima, Kenio Costa de
2017-06-08
to present a guide with recommendations for translation, adaptation, elaboration and process of validation of tests in Speech and Language Pathology. the recommendations were based on international guidelines with a focus on the elaboration, translation, cross-cultural adaptation and validation process of tests. the recommendations were grouped into two Charts, one of them with procedures for translation and transcultural adaptation and the other for obtaining evidence of validity, reliability and measures of accuracy of the tests. a guide with norms for the organization and systematization of the process of elaboration, translation, cross-cultural adaptation and validation process of tests in Speech and Language Pathology was created.
49 CFR Appendix E to Part 240 - Recommended Procedures for Conducting Skill Performance Tests
Code of Federal Regulations, 2014 CFR
2014-10-01
... experience difficulty in establishing an objective method of measuring an individual's skill level. Any... employ a written aid to help record events and procedures that as a minimum should be observed for when... developing such a written aid so as to ensure meaningful testing. When conducting a skills performance test...
49 CFR Appendix E to Part 240 - Recommended Procedures for Conducting Skill Performance Tests
Code of Federal Regulations, 2013 CFR
2013-10-01
... experience difficulty in establishing an objective method of measuring an individual's skill level. Any... employ a written aid to help record events and procedures that as a minimum should be observed for when... developing such a written aid so as to ensure meaningful testing. When conducting a skills performance test...
49 CFR Appendix E to Part 240 - Recommended Procedures for Conducting Skill Performance Tests
Code of Federal Regulations, 2012 CFR
2012-10-01
... experience difficulty in establishing an objective method of measuring an individual's skill level. Any... employ a written aid to help record events and procedures that as a minimum should be observed for when... developing such a written aid so as to ensure meaningful testing. When conducting a skills performance test...
Krleza, Jasna Lenicek; Dorotic, Adrijana; Grzunov, Ana; Maradin, Miljenka
2015-01-01
Capillary blood sampling is a medical procedure aimed at assisting in patient diagnosis, management and treatment, and is increasingly used worldwide, in part because of the increasing availability of point-of-care testing. It is also frequently used to obtain small blood volumes for laboratory testing because it minimizes pain. The capillary blood sampling procedure can influence the quality of the sample as well as the accuracy of test results, highlighting the need for immediate, widespread standardization. A recent nationwide survey of policies and practices related to capillary blood sampling in medical laboratories in Croatia has shown that capillary sampling procedures are not standardized and that only a small proportion of Croatian laboratories comply with guidelines from the Clinical Laboratory Standards Institute (CLSI) or the World Health Organization (WHO). The aim of this document is to provide recommendations for capillary blood sampling. This document has been produced by the Working Group for Capillary Blood Sampling within the Croatian Society of Medical Biochemistry and Laboratory Medicine. Our recommendations are based on existing available standards and recommendations (WHO Best Practices in Phlebotomy, CLSI GP42-A6 and CLSI C46-A2), which have been modified based on local logistical, cultural, legal and regulatory requirements. We hope that these recommendations will be a useful contribution to the standardization of capillary blood sampling in Croatia. PMID:26524965
Krleza, Jasna Lenicek; Dorotic, Adrijana; Grzunov, Ana; Maradin, Miljenka
2015-01-01
Capillary blood sampling is a medical procedure aimed at assisting in patient diagnosis, management and treatment, and is increasingly used worldwide, in part because of the increasing availability of point-of-care testing. It is also frequently used to obtain small blood volumes for laboratory testing because it minimizes pain. The capillary blood sampling procedure can influence the quality of the sample as well as the accuracy of test results, highlighting the need for immediate, widespread standardization. A recent nationwide survey of policies and practices related to capillary blood sampling in medical laboratories in Croatia has shown that capillary sampling procedures are not standardized and that only a small proportion of Croatian laboratories comply with guidelines from the Clinical Laboratory Standards Institute (CLSI) or the World Health Organization (WHO). The aim of this document is to provide recommendations for capillary blood sampling. This document has been produced by the Working Group for Capillary Blood Sampling within the Croatian Society of Medical Biochemistry and Laboratory Medicine. Our recommendations are based on existing available standards and recommendations (WHO Best Practices in Phlebotomy, CLSI GP42-A6 and CLSI C46-A2), which have been modified based on local logistical, cultural, legal and regulatory requirements. We hope that these recommendations will be a useful contribution to the standardization of capillary blood sampling in Croatia.
Round-robin testing of Soleq EV cort according to the SAE J1634 test procedure dated May 1993
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cole, G.H.
1993-05-01
The Society of Automotive Engineers Recommended Practice, SAE J1634, {open_quotes}Electric Vehicle Energy Consumption and Range Test Procedure{close_quotes}, May 1993, describes a standard method of determining the range and energy consumption for electric vehicles. Consequent to the U.S. Department of Energy`s (DOE) rulemaking released on February 4, 1994, the EPA is currently considering factoring electric vehicles into the Corporate Average Fuel Economy (CAFE) calculations using the SAE J1634 procedure. The purpose of this project is to provide information regarding the suitability of this recommended practice for determining the energy economy value to be factored into the CAFE. Issues leading to possiblemore » inconsistent results (such as the repeatability of the procedure, thoroughness of the procedure`s methods, and variance between different laboratories using different dynamometers) need to be resolved prior to passing legislation which will mandate use of this test in determining the electric vehicle CAFE credit. To this end, separate tests were performed on a Soleq EVcort vehicle by the INEL, the EPA, Ford Motor Company, Southwest Research Institute, and the California Air Resources Board using their own facilities and personnel. Acceptable departures from the driving profile prescribed by SAEJ1634 are not well defined. This deficiency in the procedure is even more noticeable due to the EVcort`s marginal acceleration performance.« less
Information Flow Analysis of Level 4 Payload Processing Operations
NASA Technical Reports Server (NTRS)
Danz, Mary E.
1991-01-01
The Level 4 Mission Sequence Test (MST) was studied to develop strategies and recommendations to facilitate information flow. Recommendations developed as a result of this study include revised format of the Test and Assembly Procedure (TAP) document and a conceptualized software based system to assist in the management of information flow during the MST.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-10
... Society of Automotive Engineers (SAE) Recommended Practice J918b--Passenger Car Tire Performance Requirements and Test Procedures (January 1967). 2, 3 As part of the strength test, a plunger is driven into a...--Passenger Car Tire Performance Requirements and Test Procedures (January 1967) Section 3.1. \\5\\ FMVSS No...
ERIC Educational Resources Information Center
Seaberg, James R.; And Others
The National Center on Child Abuse and Neglect funded a project to develop and field-test an evaluation procedure that could be used by interested states or communities to determine the extent of congruity between (1) their provisions for responding to the problems of child abuse and neglect, and (2) provisions prescribed in the Federal Standards…
Security Considerations and Recommendations in Computer-Based Testing
Al-Saleem, Saleh M.
2014-01-01
Many organizations and institutions around the globe are moving or planning to move their paper-and-pencil based testing to computer-based testing (CBT). However, this conversion will not be the best option for all kinds of exams and it will require significant resources. These resources may include the preparation of item banks, methods for test delivery, procedures for test administration, and last but not least test security. Security aspects may include but are not limited to the identification and authentication of examinee, the risks that are associated with cheating on the exam, and the procedures related to test delivery to the examinee. This paper will mainly investigate the security considerations associated with CBT and will provide some recommendations for the security of these kinds of tests. We will also propose a palm-based biometric authentication system incorporated with basic authentication system (username/password) in order to check the identity and authenticity of the examinee. PMID:25254250
Security considerations and recommendations in computer-based testing.
Al-Saleem, Saleh M; Ullah, Hanif
2014-01-01
Many organizations and institutions around the globe are moving or planning to move their paper-and-pencil based testing to computer-based testing (CBT). However, this conversion will not be the best option for all kinds of exams and it will require significant resources. These resources may include the preparation of item banks, methods for test delivery, procedures for test administration, and last but not least test security. Security aspects may include but are not limited to the identification and authentication of examinee, the risks that are associated with cheating on the exam, and the procedures related to test delivery to the examinee. This paper will mainly investigate the security considerations associated with CBT and will provide some recommendations for the security of these kinds of tests. We will also propose a palm-based biometric authentication system incorporated with basic authentication system (username/password) in order to check the identity and authenticity of the examinee.
O'Connor, B P
2000-08-01
Popular statistical software packages do not have the proper procedures for determining the number of components in factor and principal components analyses. Parallel analysis and Velicer's minimum average partial (MAP) test are validated procedures, recommended widely by statisticians. However, many researchers continue to use alternative, simpler, but flawed procedures, such as the eigenvalues-greater-than-one rule. Use of the proper procedures might be increased if these procedures could be conducted within familiar software environments. This paper describes brief and efficient programs for using SPSS and SAS to conduct parallel analyses and the MAP test.
NASA Technical Reports Server (NTRS)
Mcpherron, R. L.
1977-01-01
Procedures are described for the calibration of a vector magnetometer of high absolute accuracy. It is assumed that the calibration will be performed in the magnetic test facility of Goddard Space Flight Center (GSFC). The first main section of the report describes the test equipment and facility calibrations required. The second presents procedures for calibrating individual sensors. The third discusses the calibration of the sensor assembly. In a final section recommendations are made to GSFC for modification of the test facility required to carry out the calibration procedures.
Dukić, Lora; Kopčinović, Lara Milevoj; Dorotić, Adrijana; Baršić, Ivana
2016-10-15
Blood gas analysis (BGA) is exposed to risks of errors caused by improper sampling, transport and storage conditions. The Clinical and Laboratory Standards Institute (CLSI) generated documents with recommendations for avoidance of potential errors caused by sample mishandling. Two main documents related to BGA issued by the CLSI are GP43-A4 (former H11-A4) Procedures for the collection of arterial blood specimens; approved standard - fourth edition, and C46-A2 Blood gas and pH analysis and related measurements; approved guideline - second edition. Practices related to processing of blood gas samples are not standardized in the Republic of Croatia. Each institution has its own protocol for ordering, collection and analysis of blood gases. Although many laboratories use state of the art analyzers, still many preanalytical procedures remain unchanged. The objective of the Croatian Society of Medical Biochemistry and Laboratory Medicine (CSMBLM) is to standardize the procedures for BGA based on CLSI recommendations. The Working Group for Blood Gas Testing as part of the Committee for the Scientific Professional Development of the CSMBLM prepared a set of recommended protocols for sampling, transport, storage and processing of blood gas samples based on relevant CLSI documents, relevant literature search and on the results of Croatian survey study on practices and policies in acid-base testing. Recommendations are intended for laboratory professionals and all healthcare workers involved in blood gas processing.
Dukić, Lora; Kopčinović, Lara Milevoj; Dorotić, Adrijana; Baršić, Ivana
2016-01-01
Blood gas analysis (BGA) is exposed to risks of errors caused by improper sampling, transport and storage conditions. The Clinical and Laboratory Standards Institute (CLSI) generated documents with recommendations for avoidance of potential errors caused by sample mishandling. Two main documents related to BGA issued by the CLSI are GP43-A4 (former H11-A4) Procedures for the collection of arterial blood specimens; approved standard – fourth edition, and C46-A2 Blood gas and pH analysis and related measurements; approved guideline – second edition. Practices related to processing of blood gas samples are not standardized in the Republic of Croatia. Each institution has its own protocol for ordering, collection and analysis of blood gases. Although many laboratories use state of the art analyzers, still many preanalytical procedures remain unchanged. The objective of the Croatian Society of Medical Biochemistry and Laboratory Medicine (CSMBLM) is to standardize the procedures for BGA based on CLSI recommendations. The Working Group for Blood Gas Testing as part of the Committee for the Scientific Professional Development of the CSMBLM prepared a set of recommended protocols for sampling, transport, storage and processing of blood gas samples based on relevant CLSI documents, relevant literature search and on the results of Croatian survey study on practices and policies in acid-base testing. Recommendations are intended for laboratory professionals and all healthcare workers involved in blood gas processing. PMID:27812301
Recommendations regarding the genetic and immunological study of reproductive dysfunction.
Alonso-Cerezo, María Concepción; Calero Ruiz, Mercedes; Chantada-Abal, Venancio; de la Fuente-Hernández, Luis Alfonso; García-Cobaleda, Inmaculada; García-Ochoa, Carlos; García-Sagredo, José Miguel; Nuñez, Rocío; Oliva, Rafael; Orera-Clemente, María; Pintado-Vera, David; Sanchez-Ramon, Silvia
2018-04-19
In this article several members of diverse scientific associations and reproduction experts from Spain have updated different genetic and immunological procedure recommendations in couples affected by reproductive dysfunction with the goal of providing a set of useful guidelines for the clinic. The laboratory test has been considered as highly recommendable for making clinical decisions when the result of the diagnostic test is relevant, moderately recommendable when the results are of limited evidence because they are inconsistent, and low when the benefit of the test is uncertain. It is expected that these recommendations will provide some useful guidelines for the diagnosis, prognosis and treatment of couples presenting reproductive dysfunction. Copyright © 2018 Elsevier España, S.L.U. All rights reserved.
Advanced superposition methods for high speed turbopump vibration analysis
NASA Technical Reports Server (NTRS)
Nielson, C. E.; Campany, A. D.
1981-01-01
The small, high pressure Mark 48 liquid hydrogen turbopump was analyzed and dynamically tested to determine the cause of high speed vibration at an operating speed of 92,400 rpm. This approaches the design point operating speed of 95,000 rpm. The initial dynamic analysis in the design stage and subsequent further analysis of the rotor only dynamics failed to predict the vibration characteristics found during testing. An advanced procedure for dynamics analysis was used in this investigation. The procedure involves developing accurate dynamic models of the rotor assembly and casing assembly by finite element analysis. The dynamically instrumented assemblies are independently rap tested to verify the analytical models. The verified models are then combined by modal superposition techniques to develop a completed turbopump model where dynamic characteristics are determined. The results of the dynamic testing and analysis obtained are presented and methods of moving the high speed vibration characteristics to speeds above the operating range are recommended. Recommendations for use of these advanced dynamic analysis procedures during initial design phases are given.
NaK loop testing of thermoelectric converter modules (SNAP program)
NASA Technical Reports Server (NTRS)
Johnson, J. L.
1973-01-01
The history of testing of compact tubular modules in flowing NaK loops is summarized. Test procedures, data handling, and instrument calibration are discussed. Also included is descriptive information of the test facilities, operational problems encountered, and some recommendations for testing.
Testing Aerospace Gears for Bending Fatigue, Pitting, and Scuffing
NASA Technical Reports Server (NTRS)
Krantz, Timothy; Anderson, Cody; Shareef, Iqbal; Fetty, Jason
2017-01-01
This work was motivated by the goal to increase the power to weight ratio of rotorcraft drive systems. Experiments were conducted to establish the performance of gears made from an aerospace alloy used in production aircraft. Bending fatigue, pitting, and scuffing test procedures and results are documented. The data establishes a baseline for evaluation of new technologies. Recommendations are made to improve test procedures for future work.
Effect of non-normality on test statistics for one-way independent groups designs.
Cribbie, Robert A; Fiksenbaum, Lisa; Keselman, H J; Wilcox, Rand R
2012-02-01
The data obtained from one-way independent groups designs is typically non-normal in form and rarely equally variable across treatment populations (i.e., population variances are heterogeneous). Consequently, the classical test statistic that is used to assess statistical significance (i.e., the analysis of variance F test) typically provides invalid results (e.g., too many Type I errors, reduced power). For this reason, there has been considerable interest in finding a test statistic that is appropriate under conditions of non-normality and variance heterogeneity. Previously recommended procedures for analysing such data include the James test, the Welch test applied either to the usual least squares estimators of central tendency and variability, or the Welch test with robust estimators (i.e., trimmed means and Winsorized variances). A new statistic proposed by Krishnamoorthy, Lu, and Mathew, intended to deal with heterogeneous variances, though not non-normality, uses a parametric bootstrap procedure. In their investigation of the parametric bootstrap test, the authors examined its operating characteristics under limited conditions and did not compare it to the Welch test based on robust estimators. Thus, we investigated how the parametric bootstrap procedure and a modified parametric bootstrap procedure based on trimmed means perform relative to previously recommended procedures when data are non-normal and heterogeneous. The results indicated that the tests based on trimmed means offer the best Type I error control and power when variances are unequal and at least some of the distribution shapes are non-normal. © 2011 The British Psychological Society.
DOT National Transportation Integrated Search
2002-05-01
Two procedures for adjusting as-measured test-day spectra to reference day conditions : the Society of Automotive Engineers (SAE) Aerospace Recommended Practice (ARP) : No. 866A (866A) and a procedure utilizing pure-tone absorption equations, ...
40 CFR 204.54 - Test procedures.
Code of Federal Regulations, 2010 CFR
2010-07-01
... noise compliance testing must consist of an open site above a hard reflecting plane. The reflecting... information. All information required by this section may be recorded using the format recommended on the...
NASA Technical Reports Server (NTRS)
Wilkenfeld, J. M.; Harlacher, B. L.; Mathews, D.
1982-01-01
A combined experimental and analytical program to develop system electrical test procedures for the qualification of spacecraft against damage produced by space-electron-induced discharges (EID) occurring on spacecraft dielectric outer surfaces is described. A review and critical evaluation of possible approaches to qualify spacecraft against space electron-induced discharges (EID) is presented. A variety of possible schemes to simulate EID electromagnetic effects produced in spacecraft was studied. These techniques form the principal element of a provisional, recommended set of test procedures for the EID qualification spacecraft. Significant gaps in our knowledge about EID which impact the final specification of an electrical test to qualify spacecraft against EID are also identified.
Gronewold, Andrew D; Sobsey, Mark D; McMahan, Lanakila
2017-06-01
For the past several years, the compartment bag test (CBT) has been employed in water quality monitoring and public health protection around the world. To date, however, the statistical basis for the design and recommended procedures for enumerating fecal indicator bacteria (FIB) concentrations from CBT results have not been formally documented. Here, we provide that documentation following protocols for communicating the evolution of similar water quality testing procedures. We begin with an overview of the statistical theory behind the CBT, followed by a description of how that theory was applied to determine an optimal CBT design. We then provide recommendations for interpreting CBT results, including procedures for estimating quantiles of the FIB concentration probability distribution, and the confidence of compliance with recognized water quality guidelines. We synthesize these values in custom user-oriented 'look-up' tables similar to those developed for other FIB water quality testing methods. Modified versions of our tables are currently distributed commercially as part of the CBT testing kit. Published by Elsevier B.V.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Orendorff, Christopher; Lamb, Joshua; Steele, Leigh Anna Marie
This report describes recommended abuse testing procedures for rechargeable energy storage systems (RESSs) for electric vehicles. This report serves as a revision to the FreedomCAR Electrical Energy Storage System Abuse Test Manual for Electric and Hybrid Electric Vehicle Applications (SAND2005-3123).
Integrated Data Collection Analysis (IDCA) Program - Mixing Procedures and Materials Compatibility
DOE Office of Scientific and Technical Information (OSTI.GOV)
Olinger, Becky D.; Sandstrom, Mary M.; Warner, Kirstin F.
Three mixing procedures have been standardized for the IDCA proficiency test—solid-solid, solid-liquid, and liquid-liquid. Due to the variety of precursors used in formulating the materials for the test, these three mixing methods have been designed to address all combinations of materials. Hand mixing is recommended for quantities less than 10 grams and Jar Mill mixing is recommended for quantities over 10 grams. Consideration must also be given to the type of container used for the mixing due to the wide range of chemical reactivity of the precursors and mixtures. Eight web site sources from container and chemical manufacturers have beenmore » consulted. Compatible materials have been compiled as a resource for selecting containers made of materials stable to the mixtures. In addition, container materials used in practice by the participating laboratories are discussed. Consulting chemical compatibility tables is highly recommended for each operation by each individual engaged in testing the materials in this proficiency test.« less
Energy-efficiency program for clothes washers, clothes dryers, and dishwashers
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1977-11-01
The objectives of this study of dishwashers, clothes washers, and clothes dryers are: to evaluate existing energy efficiency test procedures and recommend the use of specific test procedures for each appliance group and to establish the maximum economically and technologically feasible energy-efficiency improvement goals for each appliance group. Specifically, the program requirements were to determine the energy efficiency of the 1972 models, to evaluate the feasibility improvements that could be implemented by 1980 to maximize energy efficiency, and to calculate the percentage efficiency improvement based on the 1972 baseline and the recommended 1980 targets. The test program was conducted usingmore » 5 dishwashers, 4 top-loading clothes washers, one front-loading clothes washer, 4 electric clothes dryers, and 4 gas clothes dryers. (MCW)« less
Apollo-Soyuz test project: Composite of MSFC final science report
NASA Technical Reports Server (NTRS)
1977-01-01
Experimental procedures of nine experiments conducted during the Apollo-Soyuz Test Project mission from July 15th to July 24th, 1975 are presented. Conclusions and recommendations based on these experiments are given.
76 FR 67457 - Proposed Data Collections Submitted for Public Comment and Recommendations
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-01
... clearance request seeks approval to pre- test: (1) Data collection from hospital ambulatory departments... will test the data collection procedures involved in integrating the NHAMCS into the NHCS. NHAMCS has...
Screening recommendations for the elderly.
Beers, M H; Fink, A; Beck, J C
1991-01-01
BACKGROUND. Studies have documented the potential contributions of preventive health care programs. Yet little is known about which screening tests should be included in public health programs for older persons. This study offers recommendations regarding these tests. METHODS. The recommendations come from synthesizing the findings of the US Preventive Services Task Force, the literature, and the consensus of experts in geriatrics, gerontology, and health policy research. The literature was evaluated to identify methodologically sound studies of the prevalence of selected disorders and benefits and availability of screening procedures for those disorders. Experts from various fields specializing in the care of the elderly formed panels to assist in evaluating the literature and providing further information from gerontological and public health perspectives. RESULTS. We recommend vision testing for refractive error; inspection of the skin surface for fungal infection and skin cancer, drug eruptions, and xerosis; a history for symptoms of xerosis; audiometric testing for presbycusis; surveys for hearing loss; otoscopic inspection for cerumen impaction; dental examination for caries; measurement of blood pressure for hypertension; and breast examination and mammography for cancer. CONCLUSIONS. Our study suggests that these screening procedures are useful for public health screening programs. More information is needed on the effects of screening services on the health and functioning of older persons. PMID:1951823
ERIC Educational Resources Information Center
Fowell, S. L.; Fewtrell, R.; McLaughlin, P. J.
2008-01-01
Absolute standard setting procedures are recommended for assessment in medical education. Absolute, test-centred standard setting procedures were introduced for written assessments in the Liverpool MBChB in 2001. The modified Angoff and Ebel methods have been used for short answer question-based and extended matching question-based papers,…
NASA Technical Reports Server (NTRS)
Moore, Thomas C., Sr.
2004-01-01
The character of force and strain measurement testing at LaRC is such that the types of strain gauge installations, the materials upon which the strain gauges are applied, and the test environments encountered, require many varied approaches. In 1997, a NASA Technical Memorandum (NASA TM 110327) was generated to provide the strain gauge application specialist with a listing of recommended procedures for strain gauging various transducers and test articles at LaRC. The technical memorandum offered here is an effort to keep the strain gauge user informed of new technological enhancements in strain-gauging methodology while preserving the strain-gauging guidelines set forth in the 1997 TM. This document provides detailed recommendations for strain gauging LaRC-designed balances and custom transducers, composite materials, cryogenic and high-temperature test articles, and selected non-typical or unique materials or test conditions. Additionally, one section offers details for installing Bragg-Grating type fiber-optic strain sensors for non-typical test scenarios.
16 CFR 1702.2 - Procedural requirements and recommendations.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Procedural requirements and recommendations...; PETITION PROCEDURES AND REQUIREMENTS § 1702.2 Procedural requirements and recommendations. (a) Requirements... recommendations. The following are procedural recommendations to help the Commission in its consideration of...
16 CFR 1702.2 - Procedural requirements and recommendations.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Procedural requirements and recommendations...; PETITION PROCEDURES AND REQUIREMENTS § 1702.2 Procedural requirements and recommendations. (a) Requirements... recommendations. The following are procedural recommendations to help the Commission in its consideration of...
Molina, Michael; Plaza, Victoria; Fuentes, Luis J.; Estévez, Angeles F.
2015-01-01
Memory for medical recommendations is a prerequisite for good adherence to treatment, and therefore to ameliorate the negative effects of the disease, a problem that mainly affects people with memory deficits. We conducted a simulated study to test the utility of a procedure (the differential outcomes procedure, DOP) that may improve adherence to treatment by increasing the patient’s learning and retention of medical recommendations regarding medication. The DOP requires the structure of a conditional discriminative learning task in which correct choice responses to specific stimulus–stimulus associations are reinforced with a particular reinforcer or outcome. In two experiments, participants had to learn and retain in their memory the pills that were associated with particular disorders. To assess whether the DOP improved long-term retention of the learned disorder/pill associations, participants were asked to perform two recognition memory tests, 1 h and 1 week after completing the learning phase. The results showed that compared with the standard non-differential outcomes procedure, the DOP produced better learning and long-term retention of the previously learned associations. These findings suggest that the DOP can be used as a useful complementary technique in intervention programs targeted at increasing adherence to clinical recommendations. PMID:26913010
9 CFR 113.40 - Dog safety tests.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Dog safety tests. 113.40 Section 113... Procedures § 113.40 Dog safety tests. The safety tests provided in this section shall be conducted when... recommended for use in dogs. Serials which are not found to be satisfactory when tested pursuant to the...
9 CFR 113.40 - Dog safety tests.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Dog safety tests. 113.40 Section 113... Procedures § 113.40 Dog safety tests. The safety tests provided in this section shall be conducted when... recommended for use in dogs. Serials which are not found to be satisfactory when tested pursuant to the...
9 CFR 113.40 - Dog safety tests.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Dog safety tests. 113.40 Section 113... Procedures § 113.40 Dog safety tests. The safety tests provided in this section shall be conducted when... recommended for use in dogs. Serials which are not found to be satisfactory when tested pursuant to the...
9 CFR 113.40 - Dog safety tests.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Dog safety tests. 113.40 Section 113... Procedures § 113.40 Dog safety tests. The safety tests provided in this section shall be conducted when... recommended for use in dogs. Serials which are not found to be satisfactory when tested pursuant to the...
9 CFR 113.40 - Dog safety tests.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Dog safety tests. 113.40 Section 113... Procedures § 113.40 Dog safety tests. The safety tests provided in this section shall be conducted when... recommended for use in dogs. Serials which are not found to be satisfactory when tested pursuant to the...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-24
... announces a public meeting to receive comments and recommendations (including accompanying data on which recommendations are based) from the public on the appropriate basis for establishing payment amounts for new or substantially revised Healthcare Common Procedure Coding System (HCPCS) codes being considered for Medicare...
Sicherman, N; Bombard, A T; Rappoport, P
1995-01-01
The expected utility theory suggests eliminating an age-specific criterion for recommending prenatal diagnosis to patients. We isolate the factors which patients and physicians need to consider intelligently in prenatal diagnosis, and show that the sole use of a threshold age as a screening device is inadequate. Such a threshold fails to consider adequately patients' attitudes regarding many of the possible outcomes of prenatal diagnosis; in particular, the birth of a chromosomally abnormal child and procedural-related miscarriages. It also precludes testing younger women and encourages testing in patients who do not necessarily require or desire it. All pregnant women should be informed about their prenatal diagnosis options, screening techniques, and diagnostic procedures, including their respective limitations, risks, and benefits.
Secondary Prevention of Cervical Cancer: ASCO Resource-Stratified Clinical Practice Guideline
Jeronimo, Jose; Castle, Philip E.; Temin, Sarah; Denny, Lynette; Gupta, Vandana; Kim, Jane J.; Luciani, Silvana; Murokora, Daniel; Ngoma, Twalib; Qiao, Youlin; Quinn, Michael; Sankaranarayanan, Rengaswamy; Sasieni, Peter; Schmeler, Kathleen M.; Shastri, Surendra S.
2017-01-01
Purpose To provide resource-stratified, evidence-based recommendations on the secondary prevention of cervical cancer globally. Methods ASCO convened a multidisciplinary, multinational panel of oncology, primary care, epidemiology, health economic, cancer control, public health, and patient advocacy experts to produce recommendations reflecting four resource-tiered settings. A review of existing guidelines, a formal consensus-based process, and a modified ADAPTE process to adapt existing guidelines were conducted. Other experts participated in formal consensus. Results Seven existing guidelines were identified and reviewed, and adapted recommendations form the evidence base. Four systematic reviews plus cost-effectiveness analyses provided indirect evidence to inform consensus, which resulted in ≥ 75% agreement. Recommendations Human papillomavirus (HPV) DNA testing is recommended in all resource settings; visual inspection with acetic acid may be used in basic settings. Recommended age ranges and frequencies by setting are as follows: maximal: ages 25 to 65, every 5 years; enhanced: ages 30 to 65, if two consecutive negative tests at 5-year intervals, then every 10 years; limited: ages 30 to 49, every 10 years; and basic: ages 30 to 49, one to three times per lifetime. For basic settings, visual assessment is recommended as triage; in other settings, genotyping and/or cytology are recommended. For basic settings, treatment is recommended if abnormal triage results are present; in other settings, colposcopy is recommended for abnormal triage results. For basic settings, treatment options are cryotherapy or loop electrosurgical excision procedure; for other settings, loop electrosurgical excision procedure (or ablation) is recommended. Twelve-month post-treatment follow-up is recommended in all settings. Women who are HIV positive should be screened with HPV testing after diagnosis and screened twice as many times per lifetime as the general population. Screening is recommended at 6 weeks postpartum in basic settings; in other settings, screening is recommended at 6 months. In basic settings without mass screening, infrastructure for HPV testing, diagnosis, and treatment should be developed. Additional information can be found at www.asco.org/rs-cervical-cancer-secondary-prev-guideline and www.asco.org/guidelineswiki. It is the view of of ASCO that health care providers and health care system decision makers should be guided by the recommendations for the highest stratum of resources available. The guideline is intended to complement, but not replace, local guidelines. PMID:29094101
Huang, Marilyn; Sun, Charlotte; Boyd-Rogers, Stephanie; Burzawa, Jennifer; Milbourne, Andrea; Keeler, Elizabeth; Yzquierdo, Rebecca; Lynch, Patrick; Peterson, Susan K.; Lu, Karen
2011-01-01
Background: Endometrial and colorectal cancers are the most common cancers in Lynch syndrome. Consensus guidelines recommend annual endometrial biopsy (EMB) and regular colonoscopies. We assessed the feasibility of concurrently performing EMB and colonoscopy and evaluated women's perception of pain, satisfaction, and acceptability. Methods: From July 2002 to December 2009, women who had a gene mutation for Lynch syndrome, met the Amsterdam II criteria, or had a high-risk situation that required screening were prospectively enrolled. After conscious sedation, the procedures were sequentially performed. Patients completed pre- and postprocedure questionnaires assessing pain, level of satisfaction, and acceptability. The Wilcoxon rank test and Mann-Whitney test were used to compare pain scores. Results: Forty-two women completed the study. Median age was 37 years (range, 25 to 73). Nineteen had previously had an EMB in the office setting. Women reported significantly lower median levels of pain in the combined procedure compared with previous office setting biopsies (P < .001). Regardless of parity, women reported significantly less pain for an EMB as part of the combined screen compared with an office EMB (parous, P = .003; nulliparous, P = .026). Women also reported a high level of satisfaction and more convenience in the combined procedure. All participants preferred combined to separately scheduled procedures and would recommend the combined procedure to their relatives. Conclusion: Combined colon and endometrial cancer screening is a patient-centered approach that is feasible, acceptable, and may improve adherence to Lynch syndrome screening recommendations. PMID:21532810
DOT National Transportation Integrated Search
2015-04-01
To determine conformance with NHTSAs visual-manual interface distraction guidelines and to : reduce the associated number of crashes, NHTSA recommends a visual-occlusion test : procedure. As an alternative to testing subjects following that proced...
77 FR 11545 - Proposed Data Collections Submitted for Public Comment and Recommendations
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-27
... pre- test of information collection forms and procedures. The universe for this study is English... and non-smartphone Pre-test of 20 1 8/60 3 users aged 18-65 CATI Screener/ Initial CATI Survey CATI...
IMCS reflight certification requirements and design specifications
NASA Technical Reports Server (NTRS)
1984-01-01
The requirements for reflight certification are established. Software requirements encompass the software programs that are resident in the PCC, DEP, PDSS, EC, or any related GSE. A design approach for the reflight software packages is recommended. These designs will be of sufficient detail to permit the implementation of reflight software. The PDSS/IMC Reflight Certification system provides the tools and mechanisms for the user to perform the reflight certification test procedures, test data capture, test data display, and test data analysis. The system as defined will be structured to permit maximum automation of reflight certification procedures and test data analysis.
9 CFR 113.39 - Cat safety tests.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Cat safety tests. 113.39 Section 113... Procedures § 113.39 Cat safety tests. The safety tests provided in this section shall be conducted when... recommended for use in cats. (a) The cat safety test provided in this paragraph shall be used when the Master...
Testing Intelligently Includes Double-Checking Wechsler IQ Scores
ERIC Educational Resources Information Center
Kuentzel, Jeffrey G.; Hetterscheidt, Lesley A.; Barnett, Douglas
2011-01-01
The rigors of standardized testing make for numerous opportunities for examiner error, including simple computational mistakes in scoring. Although experts recommend that test scoring be double-checked, the extent to which independent double-checking would reduce scoring errors is not known. A double-checking procedure was established at a…
Davis, Laurie Laughlin; Dodd, Barbara G
2008-01-01
Exposure control research with polytomous item pools has determined that randomization procedures can be very effective for controlling test security in computerized adaptive testing (CAT). The current study investigated the performance of four procedures for controlling item exposure in a CAT under the partial credit model. In addition to a no exposure control baseline condition, the Kingsbury-Zara, modified-within-.10-logits, Sympson-Hetter, and conditional Sympson-Hetter procedures were implemented to control exposure rates. The Kingsbury-Zara and the modified-within-.10-logits procedures were implemented with 3 and 6 item candidate conditions. The results show that the Kingsbury-Zara and modified-within-.10-logits procedures with 6 item candidates performed as well as the conditional Sympson-Hetter in terms of exposure rates, overlap rates, and pool utilization. These two procedures are strongly recommended for use with partial credit CATs due to their simplicity and strength of their results.
Secondary Prevention of Cervical Cancer: ASCO Resource-Stratified Clinical Practice Guideline.
Jeronimo, Jose; Castle, Philip E; Temin, Sarah; Denny, Lynette; Gupta, Vandana; Kim, Jane J; Luciani, Silvana; Murokora, Daniel; Ngoma, Twalib; Qiao, Youlin; Quinn, Michael; Sankaranarayanan, Rengaswamy; Sasieni, Peter; Schmeler, Kathleen M; Shastri, Surendra S
2017-10-01
To provide resource-stratified, evidence-based recommendations on the secondary prevention of cervical cancer globally. ASCO convened a multidisciplinary, multinational panel of oncology, primary care, epidemiology, health economic, cancer control, public health, and patient advocacy experts to produce recommendations reflecting four resource-tiered settings. A review of existing guidelines, a formal consensus-based process, and a modified ADAPTE process to adapt existing guidelines were conducted. Other experts participated in formal consensus. Seven existing guidelines were identified and reviewed, and adapted recommendations form the evidence base. Four systematic reviews plus cost-effectiveness analyses provided indirect evidence to inform consensus, which resulted in ≥ 75% agreement. Human papillomavirus (HPV) DNA testing is recommended in all resource settings; visual inspection with acetic acid may be used in basic settings. Recommended age ranges and frequencies by setting are as follows: maximal: ages 25 to 65, every 5 years; enhanced: ages 30 to 65, if two consecutive negative tests at 5-year intervals, then every 10 years; limited: ages 30 to 49, every 10 years; and basic: ages 30 to 49, one to three times per lifetime. For basic settings, visual assessment is recommended as triage; in other settings, genotyping and/or cytology are recommended. For basic settings, treatment is recommended if abnormal triage results are present; in other settings, colposcopy is recommended for abnormal triage results. For basic settings, treatment options are cryotherapy or loop electrosurgical excision procedure; for other settings, loop electrosurgical excision procedure (or ablation) is recommended. Twelve-month post-treatment follow-up is recommended in all settings. Women who are HIV positive should be screened with HPV testing after diagnosis and screened twice as many times per lifetime as the general population. Screening is recommended at 6 weeks postpartum in basic settings; in other settings, screening is recommended at 6 months. In basic settings without mass screening, infrastructure for HPV testing, diagnosis, and treatment should be developed.Additional information can be found at www.asco.org/rs-cervical-cancer-secondary-prev-guideline and www.asco.org/guidelineswiki.It is the view of of ASCO that health care providers and health care system decision makers should be guided by the recommendations for the highest stratum of resources available. The guideline is intended to complement, but not replace, local guidelines.
ERIC Educational Resources Information Center
Shepard, Lorrie, And Others
1981-01-01
Sixteen approaches for detecting item bias were compared on samples of Black, White, and Chicano elementary school pupils using the Lorge-Thorndike and Raven's Coloured Progressive Matrices tests. Recommendations for practical use are made. (JKS)
2015-12-01
is unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) Hull cut welding proficiency is an essential skill maintained by personnel...at naval shipyards. This thesis explores arc weld theory to develop ideal submarine hull butt joint designs and recommends preliminary testing to...shipboard hull welding applications, theoretically. Butt joint samples were created using HY-80 steel plate so that the following comparisons could
40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Glass, can... and Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be...
40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Glass, can... and Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be...
9 CFR 113.44 - Swine safety test.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Swine safety test. 113.44 Section 113... Procedures § 113.44 Swine safety test. The swine safety test provided in this section shall be conducted when.... (1) Inject each of two swine of the minimum age for which the product is recommended with the...
9 CFR 113.44 - Swine safety test.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Swine safety test. 113.44 Section 113... Procedures § 113.44 Swine safety test. The swine safety test provided in this section shall be conducted when.... (1) Inject each of two swine of the minimum age for which the product is recommended with the...
9 CFR 113.44 - Swine safety test.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Swine safety test. 113.44 Section 113... Procedures § 113.44 Swine safety test. The swine safety test provided in this section shall be conducted when.... (1) Inject each of two swine of the minimum age for which the product is recommended with the...
9 CFR 113.44 - Swine safety test.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Swine safety test. 113.44 Section 113... Procedures § 113.44 Swine safety test. The swine safety test provided in this section shall be conducted when.... (1) Inject each of two swine of the minimum age for which the product is recommended with the...
9 CFR 113.44 - Swine safety test.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Swine safety test. 113.44 Section 113... Procedures § 113.44 Swine safety test. The swine safety test provided in this section shall be conducted when.... (1) Inject each of two swine of the minimum age for which the product is recommended with the...
40 CFR 161.70 - Acceptable protocols.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Development (OECD) Protocols. Tests conducted in accordance with the requirements and recommendations of the... data generated by the study will satisfy the requirements of this part. (c) Procedures for requesting...
A Nonparametric K-Sample Test for Equality of Slopes.
ERIC Educational Resources Information Center
Penfield, Douglas A.; Koffler, Stephen L.
1986-01-01
The development of a nonparametric K-sample test for equality of slopes using Puri's generalized L statistic is presented. The test is recommended when the assumptions underlying the parametric model are violated. This procedure replaces original data with either ranks (for data with heavy tails) or normal scores (for data with light tails).…
NASA Technical Reports Server (NTRS)
Arnold, J.; Cheatwood, N.; Powell, D.; Wolf, A.; Guensey, C.; Rivellini, T.; Venkatapathy, E.; Beard, T.; Beutter, B.; Laub, B.
2005-01-01
Contents include the following: 3 Listing of critical capabilities (knowledge, procedures, training, facilities) and metrics for validating that they are mission ready. Examples of critical capabilities and validation metrics: ground test and simulations. Flight testing to prove capabilities are mission ready. Issues and recommendations.
Leenaars, P P; Hendriksen, C F; de Leeuw, W A; Carat, F; Delahaut, P; Fischer, R; Halder, M; Hanly, W C; Hartinger, J; Hau, J; Lindblad, E B; Nicklas, W; Outschoorn, I M; Stewart-Tull, D E
1999-01-01
This is the report of the thirty-fifth of a series of workshops organised by the European Centre for the Validation of Alternative Methods (ECVAM). ECVAM's main goal, as defined in 1993 by its Scientific Advisory Committee, is to promote the scientific and regulatory acceptance of alternative methods which are of importance to the biosciences and which reduce, refine or replace the use of laboratory animals. One of the first priorities set by ECVAM was the implementation of procedures which would enable it to become well informed about the state-of-the-art of non-animal test development and validation, and the potential for the possible incorporation of alternative tests into regulatory procedures. It was decided that this would be best achieved by the organisation of ECVAM workshops on specific topics, at which small groups of invited experts would review the current status of various types of in vitro tests and their potential uses, and make recommendations about the best ways forward (1). This joint ECVAM/FELASA (Federation of European Laboratory Animal Science Associations) workshop on The Immunisation of Laboratory Animals for the Production of Polyclonal Antibodies was held in Utrecht (The Netherlands), on 20-22 March 1998, under the co-chairmanship of Coenraad Hendriksen (RIVM, Bilthoven, The Netherlands) and Wim de Leeuw (Inspectorate for Health Protection, The Netherlands). The participants, all experts in the fields of immunology, laboratory animal science, or regulation, came from universities, industry and regulatory bodies. The aims of the workshop were: a) to discuss and evaluate current immunisation procedures for the production of polyclonal antibodies (including route of injection, animal species and adjuvant ); and b) to draft recommendations and guidelines to improve the immunisation procedures, with regard both to animal welfare and to the optimisation of immunisation protocols. This report summarises the outcome of the discussions and includes a number of recommendations and a set of draft guidelines (included in Appendix 1). 1999 FRAME.
Ferguson, J Scott; Van Wert, Ryan; Choi, Yoonha; Rosenbluth, Michael J; Smith, Kate Porta; Huang, Jing; Spira, Avrum
2016-05-17
Bronchoscopy is frequently used for the evaluation of suspicious pulmonary lesions found on computed tomography, but its sensitivity for detecting lung cancer is limited. Recently, a bronchial genomic classifier was validated to improve the sensitivity of bronchoscopy for lung cancer detection, demonstrating a high sensitivity and negative predictive value among patients at intermediate risk (10-60 %) for lung cancer with an inconclusive bronchoscopy. Our objective for this study was to determine if a negative genomic classifier result that down-classifies a patient from intermediate risk to low risk (<10 %) for lung cancer would reduce the rate that physicians recommend more invasive testing among patients with an inconclusive bronchoscopy. We conducted a randomized, prospective, decision impact survey study assessing pulmonologist recommendations in patients undergoing workup for lung cancer who had an inconclusive bronchoscopy. Cases with an intermediate pretest risk for lung cancer were selected from the AEGIS trials and presented in a randomized fashion to pulmonologists either with or without the patient's bronchial genomic classifier result to determine how the classifier results impacted physician decisions. Two hundred two physicians provided 1523 case evaluations on 36 patients. Invasive procedure recommendations were reduced from 57 % without the classifier result to 18 % with a negative (low risk) classifier result (p < 0.001). Invasive procedure recommendations increased from 50 to 65 % with a positive (intermediate risk) classifier result (p < 0.001). When stratifying by ultimate disease diagnosis, there was an overall reduction in invasive procedure recommendations in patients with benign disease when classifier results were reported (54 to 41 %, p < 0.001). For patients ultimately diagnosed with malignant disease, there was an overall increase in invasive procedure recommendations when the classifier results were reported (50 to 64 %, p = 0.003). Our findings suggest that a negative (low risk) bronchial genomic classifier result reduces invasive procedure recommendations following an inconclusive bronchoscopy and that the classifier overall reduces invasive procedure recommendations among patients ultimately diagnosed with benign disease. These results support the potential clinical utility of the classifier to improve management of patients undergoing bronchoscopy for suspect lung cancer by reducing additional invasive procedures in the setting of benign disease.
Bayesian networks for satellite payload testing
NASA Astrophysics Data System (ADS)
Przytula, Krzysztof W.; Hagen, Frank; Yung, Kar
1999-11-01
Satellite payloads are fast increasing in complexity, resulting in commensurate growth in cost of manufacturing and operation. A need exists for a software tool, which would assist engineers in production and operation of satellite systems. We have designed and implemented a software tool, which performs part of this task. The tool aids a test engineer in debugging satellite payloads during system testing. At this stage of satellite integration and testing both the tested payload and the testing equipment represent complicated systems consisting of a very large number of components and devices. When an error is detected during execution of a test procedure, the tool presents to the engineer a ranked list of potential sources of the error and a list of recommended further tests. The engineer decides this on this basis if to perform some of the recommended additional test or replace the suspect component. The tool has been installed in payload testing facility. The tool is based on Bayesian networks, a graphical method of representing uncertainty in terms of probabilistic influences. The Bayesian network was configured using detailed flow diagrams of testing procedures and block diagrams of the payload and testing hardware. The conditional and prior probability values were initially obtained from experts and refined in later stages of design. The Bayesian network provided a very informative model of the payload and testing equipment and inspired many new ideas regarding the future test procedures and testing equipment configurations. The tool is the first step in developing a family of tools for various phases of satellite integration and operation.
[Determination of blood alcohol among aviation personnel: proposed operative protocol].
Lopez, A; Cardoni, F; Bova, M; Simonazzi, S; Romolo, F S; Ricciardi Tenore, G
2003-01-01
The problems of the use/abuse of alcohol need a special attention by the Public Authorities, based on the scientific evidences related to the subject. We would like to define in the present paper the procedures for alcohol testing (and drug testing) in the sailors, following the international aviation authorities (ICAO, JAR-OPS-1, FAA) recommendations. A Working Group was established to study both the scientific and the legal aspects of the problems related to alcohol testing in Italy. Experts from the Università "La Sapienza" and from Alitalia studied the alcohol testing issues abroad to set out criteria, guidelines and procedures for random testing in Italy.
ERIC Educational Resources Information Center
Hood, Paul D.
This list of recommended books and monographs was compiled by the Far West Laboratory for Educational Research and Development during a project designed to develop and test procedures to evaluate and disseminate information on training of education research and development (R&D) personnel. The purpose of the bibliography is to provide guidance for…
ERIC Educational Resources Information Center
Hill, James E.; And Others
A study has been made at the National Bureau of Standards of the different techniques that are or could be used for testing solar collectors and thermal storage devices that are used in solar heating and cooling systems. This report reviews the various testing methods and outlines a recommended test procedure, including apparatus and…
Methodological Issues in Antifungal Susceptibility Testing of Malassezia pachydermatis
Peano, Andrea; Pasquetti, Mario; Tizzani, Paolo; Chiavassa, Elisa; Guillot, Jacques; Johnson, Elizabeth
2017-01-01
Reference methods for antifungal susceptibility testing of yeasts have been developed by the Clinical and Laboratory Standards Institute (CLSI) and the European Committee on Antibiotic Susceptibility Testing (EUCAST). These methods are intended to test the main pathogenic yeasts that cause invasive infections, namely Candida spp. and Cryptococcus neoformans, while testing other yeast species introduces several additional problems in standardization not addressed by these reference procedures. As a consequence, a number of procedures have been employed in the literature to test the antifungal susceptibility of Malassezia pachydermatis. This has resulted in conflicting results. The aim of the present study is to review the procedures and the technical parameters (growth media, inoculum preparation, temperature and length of incubation, method of reading) employed for susceptibility testing of M. pachydermatis, and when possible, to propose recommendations for or against their use. Such information may be useful for the future development of a reference assay. PMID:29371554
Veitch, Andrew M; Vanbiervliet, Geoffroy; Gershlick, Anthony H; Boustiere, Christian; Baglin, Trevor P; Smith, Lesley-Ann; Radaelli, Franco; Knight, Evelyn; Gralnek, Ian M; Hassan, Cesare; Dumonceau, Jean-Marc
2016-04-01
The risk of endoscopy in patients on antithrombotics depends on the risks of procedural haemorrhage vs. thrombosis due to discontinuation of therapy. P2Y12 receptor antagonists (clopidogrel, prasugrel, ticagrelor): For low-risk endoscopic procedures we recommend continuing P2Y12 receptor antagonists as single or dual antiplatelet therapy (low quality evidence, strong recommendation);For high-risk endoscopic procedures in patients at low thrombotic risk, we recommend discontinuing P2Y12 receptor antagonists five days before the procedure (moderate quality evidence, strong recommendation). In patients on dual antiplatelet therapy, we suggest continuing aspirin (low quality evidence, weak recommendation).For high-risk endoscopic procedures in patients at high thrombotic risk, we recommend continuing aspirin and liaising with a cardiologist about the risk/benefit of discontinuation of P2Y12 receptor antagonists (high quality evidence, strong recommendation). Warfarin: The advice for warfarin is fundamentally unchanged from BSG 2008 guidance. Direct Oral Anticoagulants (DOAC): For low-risk endoscopic procedures we suggest omitting the morning dose of DOAC on the day of the procedure (very low quality evidence, weak recommendation). For high-risk endoscopic procedures, we recommend that the last dose of DOAC be taken ≥ 48 hours before the procedure (very low quality evidence, strong recommendation). For patients on dabigatran with CrCl (or estimated glomerular filtration rate, eGFR) of 30 - 50 mL/min we recommend that the last dose of DOAC be taken 72 hours before the procedure (very low quality evidence, strong recommendation). In any patient with rapidly deteriorating renal function a haematologist should be consulted (low quality evidence, strong recommendation). © Georg Thieme Verlag KG Stuttgart · New York.
Seismic design verification of LMFBR structures
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1977-07-01
The report provides an assessment of the seismic design verification procedures currently used for nuclear power plant structures, a comparison of dynamic test methods available, and conclusions and recommendations for future LMFB structures.
78 FR 43883 - Proposed Data Collections Submitted for Public Comment and Recommendations
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-22
...,000 additional persons might participate in tests of procedures, special studies, or methodological... participants who have completed the NHANES examination. This information is designed to better understand...
77 FR 28599 - Proposed Data Collections Submitted for Public Comment and Recommendations
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-15
...,000 additional persons might participate in tests of procedures, special studies, or methodological... produce descriptive statistics which measure the health and nutrition status of the general population...
NASA Technical Reports Server (NTRS)
Tripp, John S.; Tcheng, Ping
1999-01-01
Statistical tools, previously developed for nonlinear least-squares estimation of multivariate sensor calibration parameters and the associated calibration uncertainty analysis, have been applied to single- and multiple-axis inertial model attitude sensors used in wind tunnel testing to measure angle of attack and roll angle. The analysis provides confidence and prediction intervals of calibrated sensor measurement uncertainty as functions of applied input pitch and roll angles. A comparative performance study of various experimental designs for inertial sensor calibration is presented along with corroborating experimental data. The importance of replicated calibrations over extended time periods has been emphasized; replication provides independent estimates of calibration precision and bias uncertainties, statistical tests for calibration or modeling bias uncertainty, and statistical tests for sensor parameter drift over time. A set of recommendations for a new standardized model attitude sensor calibration method and usage procedures is included. The statistical information provided by these procedures is necessary for the uncertainty analysis of aerospace test results now required by users of industrial wind tunnel test facilities.
ERIC Educational Resources Information Center
Schmidt, Norma G.
The purpose of this study was to develop a valid, reliable test to measure the knowledge of elementary school teachers about venereal disease. Recommended scientific test construction procedures were carefully followed. These included the development of a content outline and a table of specification; submitting potential test items to a review…
A Curriculum for Preparing Science Teachers to Use Microcomputers.
ERIC Educational Resources Information Center
Ellis, James D.; Kuerbis, Paul J.
1991-01-01
ENLIST Micros, a project designed to improve quality and quantity of microcomputer use in science teaching, is described. Rationale and procedures behind its development; description of the pilot test model; results of the initial field test and an implementation study; description of the revised ENLIST Micros curriculum; and recommendations for…
Code of Federal Regulations, 2011 CFR
2011-07-01
... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...
Code of Federal Regulations, 2010 CFR
2010-07-01
... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...
Code of Federal Regulations, 2012 CFR
2012-07-01
... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...
Code of Federal Regulations, 2014 CFR
2014-07-01
... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...
Code of Federal Regulations, 2013 CFR
2013-07-01
... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CHEMICAL... testing procedures shall follow recognized and generally accepted good engineering practices. The...' recommendations, industry standards or codes, good engineering practices, and prior operating experience. ...
Lin, Karl K; Rahman, Mohammad A
2018-05-21
Interest has been expressed in using a joint test procedure that requires that the results of both a trend test and a pairwise comparison test between the control and the high groups be statistically significant simultaneously at the levels of significance recommended in the FDA 2001 draft guidance for industry document for the separate tests in order for the drug effect on the development of an individual tumor type to be considered as statistically significant. Results of our simulation studies show that there is a serious consequence of large inflations of the false negative rate through large decreases of false positive rate in the use of the above joint test procedure in the final interpretation of the carcinogenicity potential of a new drug if the levels of significance recommended for separate tests are used. The inflation can be as high as 204.5% of the false negative rate when the trend test alone is required to test if the effect is statistically significant. To correct the problem, new sets of levels of significance have also been developed for those who want to use the joint test in reviews of carcinogenicity studies.
Rapid insulin sensitivity test (RIST).
Lautt, W W; Wang, X; Sadri, P; Legare, D J; Macedo, M P
1998-12-01
A rapid insulin sensitivity test (RIST) was recently introduced to assess insulin action in vivo (H. Xie, L. Zhu, Y.L. Zhang, D.J. Legare, and W.W. Lautt. J. Pharmacol. Toxicol. Methods, 35: 77-82. 1996). This technical report describes the current recommended standard operating procedure for the use of the RIST in rats based upon additional experience with approximately 100 tests. We describe the manufacture and use of an arterial-venous shunt that allows rapid multiple arterial samples and intravenous administration of drugs. The RIST procedure involves determination of a stable arterial glucose baseline to define the ideal euglycemic level to be maintained following a 5-min infusion of insulin, with the RIST index being the amount of glucose required to be infused to maintain euglycemia over the test period. Insulin administration by a 5-min infusion is preferable to a 30-s bolus administration. No significant difference was determined between the use of Toronto pork-beef or human insulin. Four consecutive RISTs were carried out in the same animal over 4-5 h with no tendency for change with time. The RIST index is sufficiently sensitive and reproducible to permit establishment of insulin dose-response curves and interference of insulin action by elimination of hepatic parasympathetic nerves, using atropine. This technical report provides the current recommended standard operating procedure for the RIST.
Yu Wei; Michael Bevers; Erin J. Belval
2015-01-01
Initial attack dispatch rules can help shorten fire suppression response times by providing easy-to-follow recommendations based on fire weather, discovery time, location, and other factors that may influence fire behavior and the appropriate response. A new procedure is combined with a stochastic programming model and tested in this study for designing initial attack...
How Picture Books on the National Science Teacher's Association Recommend List Portray Scientists
ERIC Educational Resources Information Center
Farland-Smith, Donna; Finson, Kevin D.; Arquette, Cecile M.
2017-01-01
This study utilized the Draw-A-Scientist Test Checklist (DAST-C) to assess the illustrations of scientists in the most recent three years of NSTA Recommends book lists. A total of 15,778 images were contained in the 148 books from those lists, of which 1,676 were of scientists. ANOVA procedures revealed no significant differences in stereotypical…
40 CFR Appendix M to Part 51 - Recommended Test Methods for State Implementation Plans
Code of Federal Regulations, 2014 CFR
2014-07-01
..., and after the run with the cyclone removed. The cyclone is removed before the post-test leak-check to.... 4.1.4.3 Post-Test Leak-Check. A leak-check is required at the conclusion of each sampling run... disturbing the collected sample and use the following procedure to conduct a post-test leak-check. 4.1.4.3.1...
40 CFR Appendix M to Part 51 - Recommended Test Methods for State Implementation Plans
Code of Federal Regulations, 2013 CFR
2013-07-01
..., and after the run with the cyclone removed. The cyclone is removed before the post-test leak-check to.... 4.1.4.3 Post-Test Leak-Check. A leak-check is required at the conclusion of each sampling run... disturbing the collected sample and use the following procedure to conduct a post-test leak-check. 4.1.4.3.1...
40 CFR Appendix M to Part 51 - Recommended Test Methods for State Implementation Plans
Code of Federal Regulations, 2011 CFR
2011-07-01
..., and after the run with the cyclone removed. The cyclone is removed before the post-test leak-check to.... 4.1.4.3 Post-Test Leak-Check. A leak-check is required at the conclusion of each sampling run... disturbing the collected sample and use the following procedure to conduct a post-test leak-check. 4.1.4.3.1...
40 CFR Appendix M to Part 51 - Recommended Test Methods for State Implementation Plans
Code of Federal Regulations, 2012 CFR
2012-07-01
..., and after the run with the cyclone removed. The cyclone is removed before the post-test leak-check to.... 4.1.4.3 Post-Test Leak-Check. A leak-check is required at the conclusion of each sampling run... disturbing the collected sample and use the following procedure to conduct a post-test leak-check. 4.1.4.3.1...
NASA Technical Reports Server (NTRS)
1985-01-01
Advanced testing of structural materials was developed by Lewis Research Center and Langley Research Center working with the American Society for Testing and Materials (ASTM). Under contract, Aluminum Company of America (Alcoa) conducted a study for evaluating stress corrosion cracking, and recommended the "breaking load" method which determines fracture strengths as well as measuring environmental degradation. Alcoa and Langley plan to submit the procedure to ASTM as a new testing method.
Autonomous power expert system advanced development
NASA Technical Reports Server (NTRS)
Quinn, Todd M.; Walters, Jerry L.
1991-01-01
The autonomous power expert (APEX) system is being developed at Lewis Research Center to function as a fault diagnosis advisor for a space power distribution test bed. APEX is a rule-based system capable of detecting faults and isolating the probable causes. APEX also has a justification facility to provide natural language explanations about conclusions reached during fault isolation. To help maintain the health of the power distribution system, additional capabilities were added to APEX. These capabilities allow detection and isolation of incipient faults and enable the expert system to recommend actions/procedure to correct the suspected fault conditions. New capabilities for incipient fault detection consist of storage and analysis of historical data and new user interface displays. After the cause of a fault is determined, appropriate recommended actions are selected by rule-based inferencing which provides corrective/extended test procedures. Color graphics displays and improved mouse-selectable menus were also added to provide a friendlier user interface. A discussion of APEX in general and a more detailed description of the incipient detection, recommended actions, and user interface developments during the last year are presented.
40 CFR 90.118 - Certification procedure-service accumulation and usage of deterioration factors.
Code of Federal Regulations, 2010 CFR
2010-07-01
... recommended lubrication and filter changes, may be performed during service accumulation without the... on the test engine(s). (e) For purposes of establishing whether Phase 2 engines comply with...
Berger, Marc L; Sox, Harold; Willke, Richard J; Brixner, Diana L; Eichler, Hans-Georg; Goettsch, Wim; Madigan, David; Makady, Amr; Schneeweiss, Sebastian; Tarricone, Rosanna; Wang, Shirley V; Watkins, John; Mullins, C Daniel
2017-09-01
Real-world evidence (RWE) includes data from retrospective or prospective observational studies and observational registries and provides insights beyond those addressed by randomized controlled trials. RWE studies aim to improve health care decision making. The International Society for Pharmacoeconomics and Outcomes Research (ISPOR) and the International Society for Pharmacoepidemiology (ISPE) created a task force to make recommendations regarding good procedural practices that would enhance decision makers' confidence in evidence derived from RWD studies. Peer review by ISPOR/ISPE members and task force participants provided a consensus-building iterative process for the topics and framing of recommendations. The ISPOR/ISPE Task Force recommendations cover seven topics such as study registration, replicability, and stakeholder involvement in RWE studies. These recommendations, in concert with earlier recommendations about study methodology, provide a trustworthy foundation for the expanded use of RWE in health care decision making. The focus of these recommendations is good procedural practices for studies that test a specific hypothesis in a specific population. We recognize that some of the recommendations in this report may not be widely adopted without appropriate incentives from decision makers, journal editors, and other key stakeholders. Copyright © 2017. Published by Elsevier Inc.
2004-01-01
Laboratories performing waived testing must follow the manufacturer's instructions as well as good laboratory practices to ensure that test results are reliable. Four things to concentrate on to maximize the performance and reliability of waived tests are to: 1. Read and follow the information found in the package inserts. 2. Follow the manufacturer's recommendations for running quality control. 3. Train staff members to perform tests correctly. 4. Follow established policies and procedures for patient testing in the practice.
Pretest information for a test to validate plume simulation procedures (FA-17)
NASA Technical Reports Server (NTRS)
Hair, L. M.
1978-01-01
The results of an effort to plan a final verification wind tunnel test to validate the recommended correlation parameters and application techniques were presented. The test planning effort was complete except for test site finalization and the associated coordination. Two suitable test sites were identified. Desired test conditions were shown. Subsequent sections of this report present the selected model and test site, instrumentation of this model, planned test operations, and some concluding remarks.
Recommending a minimum English proficiency standard for entry-level nursing.
O'Neill, Thomas R; Tannenbaum, Richard J; Tiffen, Jennifer
2005-01-01
When nurses who are educated internationally immigrate to the United States, they are expected to have English language proficiency in order to function as a competent nurse. The purpose of this research was to provide sufficient information to the National Council of State Boards of Nursing (NCSBN) to make a defensible recommended passing standard for English proficiency. This standard was based upon the Test of English as a Foreign Language (TOEFL). A large panel of nurses and nurse regulators (N = 25) was convened to determine how much English proficiency is required to be minimally competent as an entry-level nurse. Two standard setting procedures, the Simulated Minimally Competent Candidate (SMCC) procedure and the Examinee Paper Selection Method, were combined to produce recommendations for each panelist. In conjunction with collateral information, these recommendations were reviewed by the NCSBN Examination Committee, which decided upon an NCSBN recommended standard, a TOEFL score of 220. Because the adoption of this standard rests entirely with the individual state, NCSBN has little more to do with implementing the standard, other than answering questions and providing documentation about the standard.
Manufacture of Optacons for a Field Trial Within Elementary and Secondary Schools. Final Report.
ERIC Educational Resources Information Center
Brugler, J. Stephen; Bliss, James C.
Telesensory Systems, Inc. (TSI) was awarded a contract to design, develop, and test Optacons (Optical-to-Tactile Converter) and perepheral equipment. Optacons are direct-translation reading aids for the blind. The text summarizes the engineering design, manufacturing activities, field test procedure and results, and it provides recommendations for…
40 CFR 1065.372 - NDUV analyzer HC and H2O interference verification.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o... recommend that you extract engine exhaust to perform this verification. Use a CLD that meets the..., if one is used during testing, introduce the engine exhaust to the NDUV analyzer. (4) Allow time for...
40 CFR 1065.372 - NDUV analyzer HC and H2O interference verification.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o... recommend that you extract engine exhaust to perform this verification. Use a CLD that meets the..., if one is used during testing, introduce the engine exhaust to the NDUV analyzer. (4) Allow time for...
40 CFR 1065.372 - NDUV analyzer HC and H2O interference verification.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o... recommend that you extract engine exhaust to perform this verification. Use a CLD that meets the..., if one is used during testing, introduce the engine exhaust to the NDUV analyzer. (4) Allow time for...
40 CFR 1065.372 - NDUV analyzer HC and H2O interference verification.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Nox and N2o... recommend that you extract engine exhaust to perform this verification. Use a CLD that meets the..., if one is used during testing, introduce the engine exhaust to the NDUV analyzer. (4) Allow time for...
78 FR 54653 - Proposed Data Collections Submitted for Public Comment and Recommendations
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-05
... materials on opinions about CRC screening tests. Each respondent will be randomly assigned to one of three... treatment group that receives a ``No Excuses'' educational flyer designed to dispel many common reasons for... randomly selected from the KN KnowledgePanel[supreg]. A pre-test of study procedures will be conducted...
Validation of biological activity testing procedure of recombinant human interleukin-7.
Lutsenko, T N; Kovalenko, M V; Galkin, O Yu
2017-01-01
Validation procedure for method of monitoring the biological activity of reсombinant human interleukin-7 has been developed and conducted according to the requirements of national and international recommendations. This method is based on the ability of recombinant human interleukin-7 to induce proliferation of T lymphocytes. It has been shown that to control the biological activity of recombinant human interleukin-7 peripheral blood mononuclear cells (PBMCs) derived from blood or cell lines can be used. Validation characteristics that should be determined depend on the method, type of product or object test/measurement and biological test systems used in research. The validation procedure for the method of control of biological activity of recombinant human interleukin-7 in peripheral blood mononuclear cells showed satisfactory results on all parameters tested such as specificity, accuracy, precision and linearity.
Recommending a minimum English proficiency standard for entry-level nursing.
O'Neill, Thomas R; Marks, Casey; Wendt, Anne
2005-01-01
The purpose of this research was to provide sufficient information to the National Council of State Boards of Nursing (NCSBN) to make a defensible recommended passing standard for English proficiency. This standard was based upon the Test of English as a Foreign Language (TOEFL). A large panel of nurses and nurse regulators (N = 25) was convened to determine how much English proficiency is required to be minimally competent as an entry-level nurse. Two standard setting procedures were combined to produce recommendations for each panelist. In conjunction with collateral information, these recommendations were reviewed by the NCSBN Examination Committee, which decided upon an NCSBN recommended standard, a TOEFL score of 220.
ERIC Educational Resources Information Center
Bauer, Daniel J.; Preacher, Kristopher J.; Gil, Karen M.
2006-01-01
The authors propose new procedures for evaluating direct, indirect, and total effects in multilevel models when all relevant variables are measured at Level 1 and all effects are random. Formulas are provided for the mean and variance of the indirect and total effects and for the sampling variances of the average indirect and total effects.…
Unproven diagnostic procedures in IgE-mediated allergic diseases.
Niggemann, B; Grüber, C
2004-08-01
A considerable body of literature on therapeutic aspects of complementary and alternative medicine has been published in recent years, but little is known on diagnostic procedures. This short review lists complementary and alternative diagnostic procedures for the diagnosis of allergic diseases and presents an assessment of their usefulness for the daily practice. The review of the literature revealed that neither the determination of specific immunoglobulin G-antibodies in serum, the hair-analysis, the cytotoxic test, kinesiology, iridology, or electrodermal testing represent useful tests for the daily practice. To date, no complementary or alternative diagnostic procedure can be recommended as a meaningful element in the diagnostic work-up of allergic diseases. This is especially true for food allergy: properly performed oral food challenges still represent the gold standard for implementing specific diets in food allergic individuals. Ineffective diagnostic approaches may be costly for the consumer and delay appropriate therapy.
Criterion-Referenced Testing for College-Level General Education: Some Problems and Recommendations.
ERIC Educational Resources Information Center
Benoist, Howard
1979-01-01
The adoption of a criterion-referenced assessment system and the resulting disadvantages of this form of evaluation for the college general education program are discussed, including problems in identifying assessment validation procedures. (RAO)
40 CFR 246.201-6 - Recommended procedures: Transportation to market.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Transportation to market. 246.201-6 Section 246.201-6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Procedures § 246.201-6 Recommended procedures: Transportation to market. Transportation to market may be...
40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.
Code of Federal Regulations, 2014 CFR
2014-07-01
..., and mixed paper separation. 246.201-3 Section 246.201-3 Protection of Environment ENVIRONMENTAL... and Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be...
40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.
Code of Federal Regulations, 2013 CFR
2013-07-01
..., and mixed paper separation. 246.201-3 Section 246.201-3 Protection of Environment ENVIRONMENTAL... and Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be...
40 CFR 246.200-4 - Recommended procedures: Levels of separation.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Levels of... § 246.200-4 Recommended procedures: Levels of separation. A two-level separation is recommended for most... separate category cost effective may choose to implement three levels of separation: (1) Computer papers...
40 CFR 240.200-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.200-3 Recommended procedures: Operations. (a) Storage areas for special wastes should be... acceptance of Special Wastes. ...
40 CFR 240.200-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.200-3 Recommended procedures: Operations. (a) Storage areas for special wastes should be... acceptance of Special Wastes. ...
Results of the first provisional technical secretariat interlaboratory comparison test
DOE Office of Scientific and Technical Information (OSTI.GOV)
Stuff, J.R.; Hoffland, L.
1995-06-01
The principal task of this laboratory in the first Provisional Technical Secretariat (PTS) Interlaboratory Comparison Test was to verify and test the extraction and preparation procedures outlined in the Recommended Operating Procedures for Sampling and Analysis in the Verification of Chemical Disarmament in addition to our laboratory extraction methods and our laboratory analysis methods. Sample preparation began on 16 May 1994 and analysis was completed on 12 June 1994. The analytical methods used included NMR ({sup 1}H and {sup 31}P) GC/AED, GC/MS (EI and methane CI), GC/IRD, HPLC/IC, HPLC/TSP/MS, MS/MS(Electrospray), and CZE.
1973-12-18
abosrbent canister under all of the conditions in which the helmet will be expected to operate. These tests are very similar to those of Section III. B. 4... abosrbent canister will be operating but on air). Since the CO2 absorbent canister is not operating, it need not be instrumented. b. Recommended Tests -W 1
Skin prick tests and allergy diagnosis.
Antunes, João; Borrego, Luís; Romeira, Ana; Pinto, Paula
2009-01-01
Skin testing remains an essential diagnostic tool in modern allergy practice. A significant variability has been reported regarding technical procedures, interpretation of results and documentation. This review has the aim of consolidating methodological recommendations through a critical analysis on past and recent data. This will allow a better understanding on skin prick test (SPT) history; technique; (contra-) indications; interpretation of results; diagnostic pitfalls; adverse reactions; and variability factors.
Recommended specifications and a tentative testing procedure for reflective sheeting.
DOT National Transportation Integrated Search
1977-01-01
The Department spends approximately a half million dollars annually on reflective sheeting for highway signs. For years this sheeting has been purchased primarily from one manufacturer, because of the inability of other firms to produce a competitive...
40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.
Code of Federal Regulations, 2012 CFR
2012-07-01
... mixed paper separation. 246.201-3 Section 246.201-3 Protection of Environment ENVIRONMENTAL PROTECTION... Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be separated at the...
Readability of Invasive Procedure Consent Forms.
Eltorai, Adam E M; Naqvi, Syed S; Ghanian, Soha; Eberson, Craig P; Weiss, Arnold-Peter C; Born, Christopher T; Daniels, Alan H
2015-12-01
Informed consent is a pillar of ethical medicine which requires patients to fully comprehend relevant issues including the risks, benefits, and alternatives of an intervention. Given the average reading skill of US adults is at the 8th grade level, the American Medical Association (AMA) and the National Institutes of Health (NIH) recommend patient information materials should not exceed a 6th grade reading level. We hypothesized that text provided in invasive procedure consent forms would exceed recommended readability guidelines for medical information. To test this hypothesis, we gathered procedure consent forms from all surgical inpatient hospitals in the state of Rhode Island. For each consent form, readability analysis was measured with the following measures: Flesch Reading Ease Formula, Flesch-Kincaid Grade Level, Fog Scale, SMOG Index, Coleman-Liau Index, Automated Readability Index, and Linsear Write Formula. These readability scores were used to calculate a composite Text Readability Consensus Grade Level. Invasive procedure consent forms were found to be written at an average of 15th grade level (i.e., third year of college), which is significantly higher than the average US adult reading level of 8th grade (p < 0.0001) and the AMA/NIH recommended readability guidelines for patient materials of 6th grade (p < 0.0001). Invasive procedure consent forms have readability levels which makes comprehension difficult or impossible for many patients. Efforts to improve the readability of procedural consent forms should improve patient understanding regarding their healthcare decisions. © 2015 Wiley Periodicals, Inc.
Readability of Invasive Procedure Consent Forms
Eltorai, Adam E. M.; Naqvi, Syed S.; Ghanian, Soha; Eberson, Craig P.; Weiss, Arnold‐Peter C.; Born, Christopher T.
2015-01-01
Abstract Background Informed consent is a pillar of ethical medicine which requires patients to fully comprehend relevant issues including the risks, benefits, and alternatives of an intervention. Given the average reading skill of US adults is at the 8th grade level, the American Medical Association (AMA) and the National Institutes of Health (NIH) recommend patient information materials should not exceed a 6th grade reading level. We hypothesized that text provided in invasive procedure consent forms would exceed recommended readability guidelines for medical information. Materials and methods To test this hypothesis, we gathered procedure consent forms from all surgical inpatient hospitals in the state of Rhode Island. For each consent form, readability analysis was measured with the following measures: Flesch Reading Ease Formula, Flesch–Kincaid Grade Level, Fog Scale, SMOG Index, Coleman–Liau Index, Automated Readability Index, and Linsear Write Formula. These readability scores were used to calculate a composite Text Readability Consensus Grade Level. Results Invasive procedure consent forms were found to be written at an average of 15th grade level (i.e., third year of college), which is significantly higher than the average US adult reading level of 8th grade (p < 0.0001) and the AMA/NIH recommended readability guidelines for patient materials of 6th grade (p < 0.0001). Conclusion Invasive procedure consent forms have readability levels which makes comprehension difficult or impossible for many patients. Efforts to improve the readability of procedural consent forms should improve patient understanding regarding their healthcare decisions. PMID:26678039
ERIC Educational Resources Information Center
Perkins, Kyle
In this paper four classes of procedures for measuring the instructional sensitivity of reading comprehension test items are reviewed. True experimental designs are not recommended because some of the most important reading comprehension variables do not lend themselves to experimental manipulation. "Ex post facto" factorial designs are…
Berger, Marc L; Sox, Harold; Willke, Richard J; Brixner, Diana L; Eichler, Hans-Georg; Goettsch, Wim; Madigan, David; Makady, Amr; Schneeweiss, Sebastian; Tarricone, Rosanna; Wang, Shirley V; Watkins, John; Daniel Mullins, C
2017-09-01
Real-world evidence (RWE) includes data from retrospective or prospective observational studies and observational registries and provides insights beyond those addressed by randomized controlled trials. RWE studies aim to improve health care decision making. The International Society for Pharmacoeconomics and Outcomes Research (ISPOR) and the International Society for Pharmacoepidemiology (ISPE) created a task force to make recommendations regarding good procedural practices that would enhance decision makers' confidence in evidence derived from RWD studies. Peer review by ISPOR/ISPE members and task force participants provided a consensus-building iterative process for the topics and framing of recommendations. The ISPOR/ISPE Task Force recommendations cover seven topics such as study registration, replicability, and stakeholder involvement in RWE studies. These recommendations, in concert with earlier recommendations about study methodology, provide a trustworthy foundation for the expanded use of RWE in health care decision making. The focus of these recommendations is good procedural practices for studies that test a specific hypothesis in a specific population. We recognize that some of the recommendations in this report may not be widely adopted without appropriate incentives from decision makers, journal editors, and other key stakeholders. © 2017 The Authors. Pharmacoepidemiology & Drug Safety published by John Wiley & Sons Ltd.
Sattler, J M
1979-05-01
Hardy, Welcher, Mellitis, and Kagan altered standard WISC administrative and scoring procedures and, from the resulting higher subtest scores, concluded that IQs based on standardized tests are inappropriate measures for inner-city children. Careful examination of their study reveals many methodological inadequacies and problematic interpretations. Three of these are as follows: (a) failure to use any external criterion to evaluate the validity of their testing-of-limits procedures; (b) the possibility of examiner and investigator bias; and (c) lack of any comparison group that might demonstrate that poor children would be helped more than others by the probes recommended. Their report creates misleading doubts about existing intelligence tests and does a disservice to inner-city children who need the benefits of the judicious use of diagnostic procedures, which include standardized intelligence tests. Consequently, their assertion concerning the inappropriateness of standardized test results for inner-city children is not only premature and misleading, but it is unwarranted as well.
Statistical evaluation of rainfall-simulator and erosion testing procedure : final report.
DOT National Transportation Integrated Search
1977-01-01
The specific aims of this study were (1) to supply documentation of statistical repeatability and precision of the rainfall-simulator and to document the statistical repeatabiity of the soil-loss data when using the previously recommended tentative l...
40 CFR 1065.330 - Exhaust-flow calibration.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Section 1065.330 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications Flow-Related Measurements § 1065.330... ultrasonic flow meter for raw exhaust flow measurement, we recommend that you calibrate it as described in...
ASCCP Colposcopy Standards: Risk-Based Colposcopy Practice.
Wentzensen, Nicolas; Schiffman, Mark; Silver, Michelle I; Khan, Michelle J; Perkins, Rebecca B; Smith, Katie M; Gage, Julia C; Gold, Michael A; Conageski, Christine; Einstein, Mark H; Mayeaux, Edward J; Waxman, Alan G; Huh, Warner K; Massad, L Stewart
2017-10-01
The American Society for Colposcopy and Cervical Pathology (ASCCP) Colposcopy Standards recommendations address the role of and approach to colposcopy for cervical cancer prevention in the United States. The recommendations were developed by an expert working group appointed by ASCCP's Board of Directors. This article describes the rationale, evidence, and recommendations related to risk-based colposcopy practice. Women referred to colposcopy have a wide range of underlying precancer risk, which can be estimated by referral screening tests including cytology and human papillomavirus testing, in conjunction with the colposcopic impression. Multiple targeted biopsies, at least 2 and up to 4, are recommended to improve detection of prevalent precancers. At the lowest end of the risk spectrum, untargeted biopsies are not recommended, and women with a completely normal colposcopic impression can be observed. At the highest end of the risk spectrum, immediate treatment is an alternative to biopsy confirmation. Assessing the risk of cervical precancer at the colposcopy visit allows for modification of colposcopy procedures consistent with a woman's risk. Implementation of these recommendations is expected to lead to improved detection of cervical precancers at colposcopy, while providing more reassurance of negative colposcopy results.
40 CFR 240.209-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.209-2 Section 240.209-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...
40 CFR 240.202-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.202-2 Section 240.202-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...
40 CFR 240.210-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.210-2 Section 240.210-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...
40 CFR 240.206-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.206-2 Section 240.206-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...
40 CFR 240.202-2 - Recommended procedures: Design.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Design. 240.202-2 Section 240.202-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...
40 CFR 240.211-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.211-2 Section 240.211-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures...
40 CFR 240.200-2 - Recommended procedures: Design.
Code of Federal Regulations, 2011 CFR
2011-07-01
....200-2 Section 240.200-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.200-2 Recommended procedures: Design. (a) In addition to the residential and commercial wastes...
40 CFR 240.200-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
....200-2 Section 240.200-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.200-2 Recommended procedures: Design. (a) In addition to the residential and commercial wastes...
40 CFR 240.200-2 - Recommended procedures: Design.
Code of Federal Regulations, 2013 CFR
2013-07-01
... processing. These include: Certain bulky wastes (e.g., combustible demolition and construction debris, tree... WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.200-2 Recommended procedures: Design. (a) In addition to the residential and commercial wastes...
Weiner, M; Penha, P D
1990-01-01
An investigation of the hydrolysis of Tween 80 reagent by Branhamella catarrhalis and related organisms (Neisseria and Moraxella species) revealed that only B. catarrhalis gave a positive result. A total of 226 strains, including reference organisms and clinical isolates, were studied. B. catarrhalis changed the color of the reagent from amber to pink-red after overnight incubation. We recommend this simple and cost-effective test as an alternative procedure to DNase testing or tributyrin hydrolysis or as a supplemental procedure for the identification of B. catarrhalis in clinical specimens. PMID:2105335
2010-08-06
The Department is publishing this final rule to implement section 703 of the National Defense Authorization Act (NDAA) for Fiscal Year 2007 (FY07), Public Law 109-364. Specifically, that legislation authorizes breast cancer screening and cervical cancer screening for female beneficiaries of the Military Health System, instead of constraining such testing to mammograms and Papanicolaou smears. The rule allows coverage for "breast cancer screening" and "cervical cancer screening" for female beneficiaries of the Military Health System, instead of constraining such testing to mammograms and Papanicolaou tests. This rule ensures new breast and cervical cancer screening procedures can be added to the TRICARE benefit as such procedures are proven to be a safe, effective, and nationally accepted medical practice. This amends the cancer specific recommendations for breast and cervical cancer screenings to be brought in line with the processes for updating other cancer screening recommendations. In response to public comment on the proposed rule, this final rule includes a clarification that the benefit encompasses screening based on Health and Human Services guidelines.
Application and testing of a procedure to evaluate transferability of habitat suitability criteria
Thomas, Jeff A.; Bovee, Ken D.
1993-01-01
A procedure designed to test the transferability of habitat suitability criteria was evaluated in the Cache la Poudre River, Colorado. Habitat suitability criteria were developed for active adult and juvenile rainbow trout in the South Platte River, Colorado. These criteria were tested by comparing microhabitat use predicted from the criteria with observed microhabitat use by adult rainbow trout in the Cache la Poudre River. A one-sided X2 test, using counts of occupied and unoccupied cells in each suitability classification, was used to test for non-random selection for optimum habitat use over usable habitat and for suitable over unsuitable habitat. Criteria for adult rainbow trout were judged to be transferable to the Cache la Poudre River, but juvenile criteria (applied to adults) were not transferable. Random subsampling of occupied and unoccupied cells was conducted to determine the effect of sample size on the reliability of the test procedure. The incidence of type I and type II errors increased rapidly as the sample size was reduced below 55 occupied and 200 unoccupied cells. Recommended modifications to the procedure included the adoption of a systematic or randomized sampling design and direct measurement of microhabitat variables. With these modifications, the procedure is economical, simple and reliable. Use of the procedure as a quality assurance device in routine applications of the instream flow incremental methodology was encouraged.
de Lima, Erimara Dall'Agnol; Fleck, Caren Schlottefeld; Borges, Januário José Vieira; Condessa, Robledo Leal; Vieira, Sílvia Regina Rios
2013-01-01
Objective To evaluate the effectiveness of an educational intervention on healthcare professionals' adherence to the technical recommendations for tracheobronchial aspiration in intensive care unit patients. Methods A quasi-experimental study was performed to evaluate intensive care unit professionals' adherence to the tracheobronchial aspiration technical recommendations in intensive care unit patients both before and after a theoretical and practical educational intervention. Comparisons were performed using the chi-square test, and the significance level was set to p<0.05. Results A total of 124 procedures, pre- and post-intervention, were observed. Increased adherence was observed in the following actions: the use of personal protective equipment (p=0.01); precaution when opening the catheter package (p<0.001); the use of a sterile glove on the dominant hand to remove the catheter (p=0.003); the contact of the sterile glove with the catheter only (p<0.001); the execution of circular movements during the catheter removal (p<0.001); wrapping the catheter in the sterile glove at the end of the procedure (p=0.003); the use of distilled water, opened at the start of the procedure, to wash the connection latex (p=0.002); the disposal of the leftover distilled water at the end of the procedure (p<0.001); and the performance of the aspiration technique procedures (p<0.001). Conclusion There was a low adherence by health professionals to the preventive measures against hospital infection, indicating the need to implement educational strategies. The educational intervention used was shown to be effective in increasing adherence to the technical recommendations for tracheobronchial aspiration. PMID:23917976
Recommended design and fabrication sequence of AMTEC test assembly
DOE Office of Scientific and Technical Information (OSTI.GOV)
Schock, A.; Kumar, V.; Noravian, H.
1998-01-01
A series of previous OSC papers described: 1) a novel methodology for the coupled thermal, fluid flow, and electrical analysis of multitube AMTEC (Alkali Metal Thermal-to-Electric Conversion) cells; 2) the application of that methodology to determine the effect of numerous design variations on the cell{close_quote}s performance, leading to selection and performance characterization of an OSC-recommended cell design; and 3) the design, analysis, and characterization of an OSC-generated power system design combining sixteen of the above AMTEC cells with two or three GPHS (General Purpose Heat Source) radioisotope heat source modules, and the applicability of those power systems to future spacemore » missions ({ital e.g.} Pluto Express and Europa Orbiter) under consideration by NASA. The OSC system design studies demonstrated the critical importance of the thermal insulation subsystem, and culminated in a design in which the eight AMTEC cells on each end of the heat source stack are embedded in Min-K fibrous insulation, and the Min-K and the GPHS modules are surrounded by graded-length Mo multifoil insulation. The present paper depicts the OSC-recommended AMTEC cell and generator designs, and identifies the need for an electrically heated (scaled-down but otherwise prototypic) test assembly for the experimental validation of the generator{close_quote}s system performance predictions. It then describes the design of an OSC-recommended test assembly consisting of an electrical heater enclosed in a graphite box to simulate the radioisotope heat source, four series-connected prototypic AMTEC cells of the OSC-recommended configuration, and a prototypic hybrid insulation package consisting of Min-K and graded-length Mo multifoils. Finally, the paper describes and illustrates an OSC-recommended detailed fabrication sequence and procedure for the above cell and test assembly. That fabrication procedure is being implemented by AMPS, Inc. with the support of DOE{close_quote}s Oak Ridge and Mound Laboratories, and the Air Force Phillips Laboratory (AFPL) will test the performance of the assembly over a range of input thermal powers and output voltages. The experimentally measured performance will be compared with the results of OSC analyses of the same insulated test assembly over the same range of operating parameters. {copyright} {ital 1998 American Institute of Physics.}« less
Pham, Thao; Gossec, Laure; Fautrel, Bruno; Combe, Bernard; Flipo, René-Marc; Goupille, Philippe; Le Loët, Xavier; Mariette, Xavier; Puéchal, Xavier; Wendling, Daniel; Schaeverbeke, Thierry; Sibilia, Jean; Sany, Jacques; Dougados, Maxime
2005-05-01
To develop recommendations for the physical and laboratory-test follow-up of patients with rheumatoid arthritis (RA) seen in everyday practice, using evidence from the literature, supplemented with expert opinion when needed. A scientific committee selected 7-10 questions using the Delphi consensus procedure. Evidence-based responses to each question were sought in the literature and were then used by a panel to develop recommendations. To fill in gaps in knowledge from the literature, the panelists relied on their personal opinion. The seven questions dealt with the physical and laboratory-test follow-up of RA and the factors predicting disease severity. The literature review identified 799 articles whose title and abstract suggested relevance to the study. Elimination of articles that provided no data on the study topic left 128 original articles. The panel developed seven recommendations, one for each question, which were accepted by consensus. Recommendations about the physical and laboratory-test follow-up of patients with RA seen in everyday practice were developed. Because they constitute an objective foundation built by consensus among experts, should improve the uniformity and quality of care provided to RA patients in everyday practice.
Serafini, G; Ingelmo, P M; Astuto, M; Baroncini, S; Borrometi, F; Bortone, L; Ceschin, C; Gentili, A; Lampugnani, E; Mangia, G; Meneghini, L; Minardi, C; Montobbio, G; Pinzoni, F; Rosina, B; Rossi, C; Sahillioğlu, E; Sammartino, M; Sonzogni, R; Sonzogni, V; Tesoro, S; Tognon, C; Zadra, N
2014-04-01
The preoperative assessment involves the process of evaluating the patient's clinical condition, which is intended to define the physical status classification, eligibility for anesthesia and the risks associated with it, thus providing elements to select the most appropriate and individualized anesthetic plan. The aim of this recommendation was provide a framework reference for the preoperative evaluation assessment of pediatric patients undergoing elective surgery or diagnostic/therapeutic procedures. We obtained evidence concerning pediatric preoperative evaluation from a systematic search of the electronic databases MEDLINE and Embase between January 1998 and February 2012. We used the format developed by the Italian Center for Evaluation of the Effectiveness of Health Care's scoring system for assessing the level of evidence and strength of recommendations. We produce a set of consensus guidelines on the preoperative assessment and on the request for preoperative tests. A review of the existing literature supporting these recommendations is provided. In reaching consensus, emphasis was placed on the level of evidence, clinical relevance and the risk/benefit ratio. Preoperative evaluation is mandatory before any diagnostic or therapeutic procedure that requires the use of anesthesia or sedation. The systematic prescription of complementary tests in children should be abandoned, and replaced by a selective and rational prescription, based on the patient history and clinical examination performed during the preoperative evaluation.
40 CFR 246.202-5 - Recommended procedures: Transportation.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Transportation. 246.202-5 Section 246.202-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.202-5 Recommended procedures: Transportation. Transportation to market may be supplied by either...
40 CFR 246.202-5 - Recommended procedures: Transportation.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Transportation. 246.202-5 Section 246.202-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.202-5 Recommended procedures: Transportation. Transportation to market may be supplied by either...
40 CFR 246.202-5 - Recommended procedures: Transportation.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Transportation. 246.202-5 Section 246.202-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.202-5 Recommended procedures: Transportation. Transportation to market may be supplied by either...
40 CFR 246.200-7 - Recommended procedures: Transportation.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Transportation. 246.200-7 Section 246.200-7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.200-7 Recommended procedures: Transportation. Transportation to market may be supplied by the...
40 CFR 246.202-5 - Recommended procedures: Transportation.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommended procedures: Transportation. 246.202-5 Section 246.202-5 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.202-5 Recommended procedures: Transportation. Transportation to market may be supplied by either...
40 CFR 246.200-7 - Recommended procedures: Transportation.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Transportation. 246.200-7 Section 246.200-7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.200-7 Recommended procedures: Transportation. Transportation to market may be supplied by the...
40 CFR 246.200-7 - Recommended procedures: Transportation.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Transportation. 246.200-7 Section 246.200-7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.200-7 Recommended procedures: Transportation. Transportation to market may be supplied by the...
40 CFR 246.200-7 - Recommended procedures: Transportation.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommended procedures: Transportation. 246.200-7 Section 246.200-7 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.200-7 Recommended procedures: Transportation. Transportation to market may be supplied by the...
Full-depth reclamation : new test procedures and recommended updates to specifications.
DOT National Transportation Integrated Search
2012-07-01
Rehabilitating an old pavement by pulverizing and stabilizing the existing pavement is a process referred to : as Full Depth Reclamation (FDR). The stabilized layer becomes either the base or sub-base of the new : pavement structure. This process has...
Improvement for determining the axial capacity of drilled shafts in shale in Illinois.
DOT National Transportation Integrated Search
2013-05-01
In this project, Illinois-specific design procedures were developed for drilled shafts founded in weak shale. In addition, : recommendations for field and laboratory testing to characterize the in situ condition of weak shales in Illinois were : deve...
Divergent Thinking and Interview Ratings
ERIC Educational Resources Information Center
Batey, Mark; Rawles, Richard; Furnham, Adrian
2009-01-01
This study examined divergent thinking (DT) test scores of applicants taking part in a selection procedure for an undergraduate psychology degree (N = 370). Interviewers made six specific (creative intelligence, motivation, work habits, emotional stability, sociability, and social responsibility) and one overall recommendation rating on each…
Quality assurance testing of a high performance steel bridge in Virginia.
DOT National Transportation Integrated Search
2005-01-01
One of the original objectives of this study was to recommend appropriate procedures for welding bridge members of high performance steel HPS70W to assure quality welds. The final objective was to determine whether hydrogen-induced microcracking migh...
PREDICTING ABUSE POTENTIAL OF STIMULANTS AND OTHER DOPAMINERGIC DRUGS: OVERVIEW AND RECOMMENDATIONS
Huskinson, Sally L.; Naylor, Jennifer E.; Rowlett, James K.; Freeman, Kevin B.
2014-01-01
Examination of a drug’s abuse potential at multiple levels of analysis (molecular/cellular action, whole-organism behavior, epidemiological data) is an essential component to regulating controlled substances under the Controlled Substances Act (CSA). We reviewed studies that examined several central nervous system (CNS) stimulants, focusing on those with primarily dopaminergic actions, in drug self-administration, drug discrimination, and physical dependence. For drug self-administration and drug discrimination, we distinguished between experiments conducted with rats and nonhuman primates (NHP) to highlight the common and unique attributes of each model in the assessment of abuse potential. Our review of drug self-administration studies suggests that this procedure is important in predicting abuse potential of dopaminergic compounds, but there were many false positives. We recommended that tests to determine how reinforcing a drug is relative to a known drug of abuse may be more predictive of abuse potential than tests that yield a binary, yes-or-no classification. Several false positives also occurred with drug discrimination. With this procedure, we recommended that future research follow a standard decision-tree approach that may require examining the drug being tested for abuse potential as the training stimulus. This approach would also allow several known drugs of abuse to be tested for substitution, and this may reduce false positives. Finally, we reviewed evidence of physical dependence with stimulants and discussed the feasibility of modeling these phenomena in nonhuman animals in a rational and practical fashion. PMID:24662599
ERIC Educational Resources Information Center
Bodroza-Pantic, O.; Matic-Kekic, Snezana; Jakovljev, Bogdanka; Markovic, Doko
2008-01-01
In this paper the didactically-methodological procedure named the MTE-model of mathematics teaching (Motivation test-Teaching-Examination test) is suggested and recommended when the teacher has subsequent lessons. This model is presented in detail through the processing of a nonstandard theme--the theme of decomposition of planes. Its efficiency…
ERIC Educational Resources Information Center
Cottingham, Phoebe; Maynard, Rebecca; Stagner, Matthew
2004-01-01
Review teams tested the systematic review procedures and principles developed under the Campbell Collaboration Fourteen review teams selected topics for intervention reviews in social policy, education, and criminal justice. Review protocols gave criteria for the extensive research literature search. Randomised Controlled Trials were selected.…
Khramov, E N; Osin, N S; Pomelova, V G; Vikha, I V; Bychenkova, T A; Smirnova, V G; Grakina, G I; Kas'ianova, T A
1999-01-01
The comprehensive development of dot-EIA made at the State Research Institute of Biological Instrument-Making Industry has provided devices KIMF-02 and KIMF-03), a base of chemical reagents, immunoassays, test systems for detection of a wide range of causative agents of viral and bacterial infections, that of serodiagnosis of their related diseases. The KIMF-02 kit has undergone engineering and medical tests and recommended for the Ministry of Health of the Russian Federation to produce them in stock. The kit includes all required for analysis even in an ill-equipped laboratory, a set of attached agents ensures a valid visual recording of results. The developed procedures and test systems allow the immunoassay to be as sensitive as TIFA; however, they are laborious and much simpler in design. The simple and rapid procedures of dot-EIA are recommended for incorporation into the a package of laboratory methods for verification of the accumulation of virus-specific antigens in various biological substrata, environmental samples, for control of the activity of antigens and antibodies used in serological tests, for detection of specific antigens in the clinical samples, and for serodiagnosis of infections.
2016-01-01
is extremely unlikely to be practicable . A second approach is to conduct a full suite of TA testing on a BWMS with a “base filter” configuration...that of full TA testing. Here, three land-based tests would be conducted, and O&M and component testing would also occur. If time or practicality ... Practical salinity units SAE Society of Automotive Engineers SDI Silt density index SOP Standard operating procedure STEP Shipboard Technology
40 CFR 246.200-6 - Recommended procedures: Storage.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Storage. 246....200-6 Recommended procedures: Storage. Among the alternatives for paper storage are on-site bailing, the use of stationary compactors, or storage in corrugated boxes or normal waste containers. Stored...
40 CFR 246.200-6 - Recommended procedures: Storage.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommended procedures: Storage. 246....200-6 Recommended procedures: Storage. Among the alternatives for paper storage are on-site bailing, the use of stationary compactors, or storage in corrugated boxes or normal waste containers. Stored...
40 CFR 246.200-6 - Recommended procedures: Storage.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Storage. 246....200-6 Recommended procedures: Storage. Among the alternatives for paper storage are on-site bailing, the use of stationary compactors, or storage in corrugated boxes or normal waste containers. Stored...
40 CFR 246.200-6 - Recommended procedures: Storage.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Storage. 246....200-6 Recommended procedures: Storage. Among the alternatives for paper storage are on-site bailing, the use of stationary compactors, or storage in corrugated boxes or normal waste containers. Stored...
40 CFR 246.200-6 - Recommended procedures: Storage.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Storage. 246....200-6 Recommended procedures: Storage. Among the alternatives for paper storage are on-site bailing, the use of stationary compactors, or storage in corrugated boxes or normal waste containers. Stored...
NASA Technical Reports Server (NTRS)
Moore, Thomas C., Sr.
1997-01-01
The NASA Langley Research Center uses more than 10000 strain gages per year in supporting its various research programs. The character of the testing at LaRC is such that the types of strain gage installations, the materials they are applied to, and the test environments encountered, require many varied approaches for installing strain gages. These installations must be accomplished in the most technically discerning and appropriate manner. This technical memorandum is offered as an assisting guide in helping the strain gage user to determine the appropriate approach for a given strain gage application requirement. Specifically, this document offers detailed recommendations for strain gaging the following: LaRC-Designed balances, LARC custom transducers, certain composite materials and alloys, high-temperature test articles, and selected non-typical or unique materials or test conditions.
Williams, Robert L; Romney, Crystal; Kano, Miria; Wright, Randy; Skipper, Betty; Getrich, Christina M; Sussman, Andrew L; Zyzanski, Stephen J
2015-06-01
Research suggests stereotyping by clinicians as one contributor to racial and gender-based health disparities. It is necessary to understand the origins of such biases before interventions can be developed to eliminate them. As a first step toward this understanding, we tested for the presence of bias in senior medical students. The purpose of the study was to determine whether bias based on race, gender, or socioeconomic status influenced clinical decision-making among medical students. We surveyed seniors at 84 medical schools, who were required to choose between two clinically equivalent management options for a set of cardiac patient vignettes. We examined variations in student recommendations based on patient race, gender, and socioeconomic status. The study included senior medical students. We investigated the percentage of students selecting cardiac procedural options for vignette patients, analyzed by patient race, gender, and socioeconomic status. Among 4,603 returned surveys, we found no evidence in the overall sample supporting racial or gender bias in student clinical decision-making. Students were slightly more likely to recommend cardiac procedural options for black (43.9 %) vs. white (42 %, p = .03) patients; there was no difference by patient gender. Patient socioeconomic status was the strongest predictor of student recommendations, with patients described as having the highest socioeconomic status most likely to receive procedural care recommendations (50.3 % vs. 43.2 % for those in the lowest socioeconomic status group, p < .001). Analysis by subgroup, however, showed significant regional geographic variation in the influence of patient race and gender on decision-making. Multilevel analysis showed that white female patients were least likely to receive procedural recommendations. In the sample as a whole, we found no evidence of racial or gender bias in student clinical decision-making. However, we did find evidence of bias with regard to the influence of patient socioeconomic status, geographic variations, and the influence of interactions between patient race and gender on student recommendations.
12 CFR 19.38 - Recommended decision and filing of record.
Code of Federal Regulations, 2010 CFR
2010-01-01
... PRACTICE AND PROCEDURE Uniform Rules of Practice and Procedure § 19.38 Recommended decision and filing of... allowed for filing reply briefs under § 19.37(b), the administrative law judge shall file with and certify... administrative law judge's recommended decision, recommended findings of fact, recommended conclusions of law...
40 CFR 240.203-2 - Recommended procedures: Design.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommended procedures: Design. 240... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...
40 CFR 240.203-2 - Recommended procedures: Design.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Design. 240... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...
40 CFR 240.203-2 - Recommended procedures: Design.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Design. 240... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...
40 CFR 240.203-2 - Recommended procedures: Design.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Design. 240.203... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...
40 CFR 240.203-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240... § 240.203-2 Recommended procedures: Design. (a) The types, amounts (by weight and volume), and characteristics of all solid wastes expected to be processed should be determined by survey and analysis. The...
40 CFR 246.202-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Market study. 246.202-3 Section 246.202-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.202-3 Recommended procedures: Market study. An investigation of markets should be made by the...
40 CFR 246.201-4 - Recommended procedures: Market study.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Market study. 246.201-4 Section 246.201-4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.201-4 Recommended procedures: Market study. An investigation of markets should be made for each...
40 CFR 246.201-4 - Recommended procedures: Market study.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Market study. 246.201-4 Section 246.201-4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.201-4 Recommended procedures: Market study. An investigation of markets should be made for each...
40 CFR 246.202-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Market study. 246.202-3 Section 246.202-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.202-3 Recommended procedures: Market study. An investigation of markets should be made by the...
40 CFR 246.200-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Market study. 246.200-3 Section 246.200-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.200-3 Recommended procedures: Market study. An investigation of markets should be made by the...
40 CFR 246.200-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Market study. 246.200-3 Section 246.200-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 246.200-3 Recommended procedures: Market study. An investigation of markets should be made by the...
40 CFR 246.201-7 - Recommended procedures: Cost analysis.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Cost analysis... § 246.201-7 Recommended procedures: Cost analysis. After potential markets have been located (but prior... residual solid waste have been established, an analysis should be conducted which compares the costs of the...
40 CFR 246.202-6 - Recommended procedures: Cost analysis.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Cost analysis... § 246.202-6 Recommended procedures: Cost analysis. After potential markets have been identified (but... residual solid waste have been established, an analysis should be conducted which compares the costs of the...
40 CFR 246.200-8 - Recommended procedures: Cost analysis.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Cost analysis... § 246.200-8 Recommended procedures: Cost analysis. After potential markets have been located (but prior... paper and residual solid waste have been established, an analysis should be conducted which compares the...
40 CFR 86.1228-85 - Transmissions.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Test Procedures for New Gasoline-Fueled, Natural Gas-Fueled, Liquefied Petroleum Gas-Fueled and... manufacturer's recommendation to the ultimate purchaser. (b) Except for the first idle mode, idle modes less...; manual transmissions shall be in gear with the clutch disengaged, except first idle. The first idle mode...
40 CFR 24.08 - Selection of appropriate hearing procedures.
Code of Federal Regulations, 2010 CFR
2010-07-01
... undertake only a RCRA Facility Investigation and/or Corrective Measures Study, which may include monitoring, surveys, testing, information gathering, analyses, and/or studies (including studies designed to develop recommendations for appropriate corrective measures), or (2) To undertake such investigations and/or studies and...
40 CFR 24.08 - Selection of appropriate hearing procedures.
Code of Federal Regulations, 2011 CFR
2011-07-01
... undertake only a RCRA Facility Investigation and/or Corrective Measures Study, which may include monitoring, surveys, testing, information gathering, analyses, and/or studies (including studies designed to develop recommendations for appropriate corrective measures), or (2) To undertake such investigations and/or studies and...
Nikolac, Nora; Šupak-Smolčić, Vesna; Šimundić, Ana-Maria; Ćelap, Ivana
2013-01-01
Phlebotomy is one of the most complex medical procedures in the diagnosis, management and treatment of patients in healthcare. Since laboratory test results are the basis for a large proportion (60–80%) of medical decisions, any error in the phlebotomy process could have serious consequences. In order to minimize the possibility of errors, phlebotomy procedures should be standardised, well-documented and written instructions should be available at every workstation. Croatia is one of the few European countries that have national guidelines for phlebotomy, besides the universally used CLSI (Clinical Laboratory Standards Institute) H3-A6 Procedures for the Collection of Diagnostic Blood Specimens by Venipuncture; approved Standard-Sixth Edition (CLSI, 2007) and WHO (World Health Organization) guidelines on drawing blood: best practices in phlebotomy (WHO, 2010). However, the growing body of evidence in importance of preanalytical phase management resulted in a need for evidence based revision and expansion of existing recommendations. The Croatian Society for Medical Biochemistry and Laboratory Medicine, Working Group for the Preanalytical Phase issued this recommendation. This document is based on the CLSI guideline H3-A6, with significant differences and additional information. PMID:24266294
Nikolac, Nora; Supak-Smolcić, Vesna; Simundić, Ana-Maria; Celap, Ivana
2013-01-01
Phlebotomy is one of the most complex medical procedures in the diagnosis, management and treatment of patients in healthcare. Since laboratory test results are the basis for a large proportion (60-80%) of medical decisions, any error in the phlebotomy process could have serious consequences. In order to minimize the possibility of errors, phlebotomy procedures should be standardised, well-documented and written instructions should be available at every workstation. Croatia is one of the few European countries that have national guidelines for phlebotomy, besides the universally used CLSI (Clinical Laboratory Standards Institute) H3-A6 Procedures for the Collection of Diagnostic Blood Specimens by Venipuncture; approved Standard-Sixth Edition (CLSI, 2007) and WHO (World Health Organization) guidelines on drawing blood: best practices in phlebotomy (WHO, 2010). However, the growing body of evidence in importance of preanalytical phase management resulted in a need for evidence based revision and expansion of existing recommendations. The Croatian Society for Medical Biochemistry and Laboratory Medicine, Working Group for the Preanalytical Phase issued this recommendation. This document is based on the CLSI guideline H3-A6, with significant differences and additional information.
Ortega, Joaquin; Cassinello, Norberto; Baltasar, Aniceto; Torres, Antonio J
2012-01-01
To standardise possible peri-operative bariatric surgery protocols, a survey was prepared to be filled in by members of the Spanish Society for Obesity (Sociedad Española de Cirugía de la Obesidad) (SECO), and to approve it at the XII National Congress. A total of 47 members of SECO from 14 autonomous communities responded, and it unanimously approved by the Congress. As highly recommended peri-operative procedures, were proposed: full laboratory analysis (98%) with an endocrine study (90%), ECG (96%), chest x-ray (98%), an oesophageal-gastric imaging test (endoscopy or gastro-duodenal transit study (98%), antibiotic prophylaxis (92%) and use of low molecular weight heparins pre-operatively (96%), and for 2 weeks (83%). Pre-surgical, abdominal ultrasound (86%), spirometry (80%), diet (88%) and psychological study (76%), and during surgery, use of elastic stockings (76%), leak tests (92%) and drainages (90%), were established as advisable procedures. Copyright © 2011 AEC. Published by Elsevier Espana. All rights reserved.
NASA Technical Reports Server (NTRS)
Dagalakis, N.; Wavering, A. J.; Spidaliere, P.
1991-01-01
Test procedures are proposed for the NASA DTF (Development Test Flight)-1 positioning tests of the FTS (Flight Telerobotic Servicer). The unique problems associated with the DTF-1 mission are discussed, standard robot performance tests and terminology are reviewed and a very detailed description of flight-like testing and analysis is presented. The major technical problem associated with DTF-1 is that only one position sensor can be used, which will be fixed at one location, with a working volume which is probably smaller than some of the robot errors to be measured. Radiation heating of the arm and the sensor could also cause distortions that would interfere with the test. Two robot performance testing committees have established standard testing procedures relevant to the DTF-1. Due to the technical problems associated with DTF-1, these procedures cannot be applied directly. These standard tests call for the use of several test positions at specific locations. Only one position, that of the position sensor, can be used by DTF-1. Off-line programming accuracy might be impossible to measure and in that case it will have to be replaced by forward kinetics accuracy.
Design, fabrication, testing, and delivery of improved beam steering devices
NASA Technical Reports Server (NTRS)
1973-01-01
The development, manufacture, and testing of an optical steerer intended for use in spaceborne optical radar systems are described. Included are design principles and design modifications made to harden the device against launch and space environments, the quality program and procedures developed to insure consistent product quality throughout the manufacturing phase, and engineering qualification model testing and evaluation. The delivered hardware design is considered conditionally qualified pending action on further recommended design modifications.
Barbui, Tiziano; Tefferi, Ayalew; Vannucchi, Alessandro M; Passamonti, Francesco; Silver, Richard T; Hoffman, Ronald; Verstovsek, Srdan; Mesa, Ruben; Kiladjian, Jean-Jacques; Hehlmann, Rȕdiger; Reiter, Andreas; Cervantes, Francisco; Harrison, Claire; Mc Mullin, Mary Frances; Hasselbalch, Hans Carl; Koschmieder, Steffen; Marchetti, Monia; Bacigalupo, Andrea; Finazzi, Guido; Kroeger, Nicolaus; Griesshammer, Martin; Birgegard, Gunnar; Barosi, Giovanni
2018-05-01
This document updates the recommendations on the management of Philadelphia chromosome-negative myeloproliferative neoplasms (Ph-neg MPNs) published in 2011 by the European LeukemiaNet (ELN) consortium. Recommendations were produced by multiple-step formalized procedures of group discussion. A critical appraisal of evidence by using Grades of Recommendation, Assessment, Development and Evaluation (GRADE) methodology was performed in the areas where at least one randomized clinical trial was published. Seven randomized controlled trials provided the evidence base; earlier phase trials also informed recommendation development. Key differences from the 2011 diagnostic recommendations included: lower threshold values for hemoglobin and hematocrit and bone marrow examination for diagnosis of polycythemia vera (PV), according to the revised WHO criteria; the search for complementary clonal markers, such as ASXL1, EZH2, IDH1/IDH2, and SRSF2 for the diagnosis of myelofibrosis (MF) in patients who test negative for JAK2V617, CALR or MPL driver mutations. Regarding key differences of therapy recommendations, both recombinant interferon alpha and the JAK1/JAK2 inhibitor ruxolitinib are recommended as second-line therapies for PV patients who are intolerant or have inadequate response to hydroxyurea. Ruxolitinib is recommended as first-line approach for MF-associated splenomegaly in patients with intermediate-2 or high-risk disease; in case of intermediate-1 disease, ruxolitinib is recommended in highly symptomatic splenomegaly. Allogeneic stem cell transplantation is recommended for transplant-eligible MF patients with high or intermediate-2 risk score. Allogeneic stem cell transplantation is also recommended for transplant-eligible MF patients with intermediate-1 risk score who present with either refractory, transfusion-dependent anemia, blasts in peripheral blood > 2%, adverse cytogenetics, or high-risk mutations. In these situations, the transplant procedure should be performed in a controlled setting.
Colegrave, Nick
2017-01-01
A common approach to the analysis of experimental data across much of the biological sciences is test-qualified pooling. Here non-significant terms are dropped from a statistical model, effectively pooling the variation associated with each removed term with the error term used to test hypotheses (or estimate effect sizes). This pooling is only carried out if statistical testing on the basis of applying that data to a previous more complicated model provides motivation for this model simplification; hence the pooling is test-qualified. In pooling, the researcher increases the degrees of freedom of the error term with the aim of increasing statistical power to test their hypotheses of interest. Despite this approach being widely adopted and explicitly recommended by some of the most widely cited statistical textbooks aimed at biologists, here we argue that (except in highly specialized circumstances that we can identify) the hoped-for improvement in statistical power will be small or non-existent, and there is likely to be much reduced reliability of the statistical procedures through deviation of type I error rates from nominal levels. We thus call for greatly reduced use of test-qualified pooling across experimental biology, more careful justification of any use that continues, and a different philosophy for initial selection of statistical models in the light of this change in procedure. PMID:28330912
Computer programs for the solution of systems of linear algebraic equations
NASA Technical Reports Server (NTRS)
Sequi, W. T.
1973-01-01
FORTRAN subprograms for the solution of systems of linear algebraic equations are described, listed, and evaluated in this report. Procedures considered are direct solution, iteration, and matrix inversion. Both incore methods and those which utilize auxiliary data storage devices are considered. Some of the subroutines evaluated require the entire coefficient matrix to be in core, whereas others account for banding or sparceness of the system. General recommendations relative to equation solving are made, and on the basis of tests, specific subprograms are recommended.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Passman, F.J.; Daniels, D.A.; Chesneau, H.F.
1995-05-01
Low-grade microbial infections of fuel and fuel systems generally go undetected until they cause major operational problems. Three interdependent factors contribute to this: mis-diagnosis, incorrect or inadequate sampling procedures and perceived complexity of microbiological testing procedures. After discussing the first two issues, this paper describes a rapid field test for estimating microbial loads in fuels and associated water. The test, adapted from a procedure initially developed to measure microbial loads in metalworking fluids, takes advantage of the nearly universal presence of the enzyme catalase in the microbes that contaminated fuel systems. Samples are reacted with a peroxide-based reagent; liberating oxygenmore » gas. The gas generates a pressure-head in a reaction tube. At fifteen minutes, a patented, electronic pressure-sensing device is used to measure that head-space pressure. The authors present both laboratory and field data from fuels and water-bottoms, demonstrating the excellent correlation between traditional viable test data (acquired after 48-72 hours incubation) and catalase test data (acquired after 15 min.-4 hours). We conclude by recommending procedures for developing a failure analysis data-base to enhance our industry`s understanding of the relationship between uncontrolled microbial contamination and fuel performance problems.« less
Ramilo, Andrea; Navas, J Ignacio; Villalba, Antonio; Abollo, Elvira
2013-05-27
Bonamia ostreae and B. exitiosa have caused mass mortalities of various oyster species around the world and co-occur in some European areas. The World Organisation for Animal Health (OIE) has included infections with both species in the list of notifiable diseases. However, official methods for species-specific diagnosis of either parasite have certain limitations. In this study, new species-specific conventional PCR (cPCR) and real-time PCR techniques were developed to diagnose each parasite species. Moreover, a multiplex PCR method was designed to detect both parasites in a single assay. The analytical sensitivity and specificity of each new method were evaluated. These new procedures were compared with 2 OIE-recommended methods, viz. standard histology and PCR-RFLP. The new procedures showed higher sensitivity than the OIE recommended ones for the diagnosis of both species. The sensitivity of tests with the new primers was higher using oyster gills and gonad tissue, rather than gills alone. The lack of a 'gold standard' prevented accurate estimation of sensitivity and specificity of the new methods. The implementation of statistical tools (maximum likelihood method) for the comparison of the diagnostic tests showed the possibility of false positives with the new procedures, although the absence of a gold standard precluded certainty. Nevertheless, all procedures showed negative results when used for the analysis of oysters from a Bonamia-free area.
Ruberu, S R; Langlois, G W; Masuda, M; Perera, S Kusum
2012-01-01
The receptor-binding assay (RBA) method for determining saxatoxin (STX) and its numerous analogues, which cause paralytic shellfish poisoning (PSP) in humans, was evaluated in a single laboratory study. Each step of the assay preparation procedure including the performance of the multi-detector TopCount® instrument was evaluated for its contribution to method variability. The overall inherent RBA variability was determined to be 17%. Variability within the 12 detectors was observed; however, there was no reproducible pattern in detector performance. This observed variability among detectors could be attributed to other factors, such as pipetting errors. In an attempt to reduce the number of plates rejected due to excessive variability in the method's quality control parameters, a statistical approach was evaluated using either Grubbs' test or the Student's t-test for rejecting outliers in the measurement of triplicate wells. This approach improved the ratio of accepted versus rejected plates, saving cost and time for rerunning the assay. However, the potential reduction in accuracy and the lack of improvement in precision suggests caution when using this approach. The current study has recommended an alternate quality control procedure for accepting or rejecting plates in place of the criteria currently used in the published assay, or the alternative of outlier testing. The recommended procedure involves the development of control charts to monitor the critical parameters identified in the published method (QC sample, EC₅₀, slope of calibration curve), with the addition of a fourth critical parameter which is the top value (100% binding) of the calibration curve.
[Concordance among invasive diagnostic procedures for Helicobacter pylori infection in adults].
Sánchez-Cuén, Jaime Alberto; Canizalez-Román, Vicente Adrián; León-Sicairos, Nidia Maribel; Irineo-Cabrales, Ana Bertha; Bernal-Magaña, Gregorio
2015-01-01
Compare the strength of concordance between culture, histology, rapid urease test for diagnosis of Helicobacter pylori infection and histopathological findings relationship and frequency of positivity among such diagnostic procedures. Diagnostic test study. The study population were subjects with endoscopy and take samples of gastric antral. Rapid urease test (one sample), histology (two samples) and culture (two samples), and histopathological findings of gastric mucosa were performed. Statistical design with Student's t, Fisher exact test, Kappa coefficient. We reviewed 108 subjects, 28 (25.9%) men, 80 (74.1%) women, mean age was 49.1 years (SD 15.1). The Kappa coefficient was 0.729 and 0.377 between culture with histology and rapid urease test, respectively; likewise the Kappa coefficient was 0.565 between histology and rapid urease test. The strength of concordance was higher between histology with culture and rapid urease test; the most recommended being histology in clinical practice for the detection of Helicobacter pylori infection.
The Scorer Reliability of Self-Scored Interest Inventories.
ERIC Educational Resources Information Center
O'Shea, Arthur J.; Harrington, Thomas F.
1980-01-01
Describes the procedures the authors of the System for Career Decision-Making (CDM) followed in establishing client scoring reliability. Authors recommend that manuals of self-scored inventories provide data establishing scorer reliability, that scoring be supervised, and that APGA test standards deal directly with scorer reliability. (Author)
Procedure for calibrating the Technicon Colorimeter I.
Black, J C; Furman, W B
1975-05-01
We describe a rapid method for calibrating the Technicon AutoAnalyzer colorimeter I. Test solutions of bromphenol blue are recommended for the calibration, in preference to solutions of potassium dichromate, based on considerations of the instrument's working range and of the stray light characteristics of the associated filters.
Teacher Contract Non-Renewal: Midwest, Rocky Mountains, and Southeast
ERIC Educational Resources Information Center
Nixon, Andy; Dam, Margaret; Packard, Abbot L.
2012-01-01
This quantitative study investigated reasons that school principals recommend non-renewal of probationary teachers' contracts. Principal survey results from three regions of the US (Midwest, Rocky Mountains, & Southeast) were analyzed using the Kruskal-Wallis and Mann-Whitney U statistical procedures, while significance was tested applying a…
40 CFR 52.70 - Identification of plan.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Hearings, Written Testimony, etc. I-2 Recommendations for attainment/Nonattainment designations II-1 Alaska... for the Fairbanks Municipal Utilities System IV-3 Testing Procedures V-1 Air Quality Data An amended... Control Plan Amendment (which includes Appendix A the Alaska Statutes Title 46, Chapter 14, Article 3...
Using Google Blogs and Discussions to Recommend Biomedical Resources: A Case Study
Reed, Robyn B.; Chattopadhyay, Ansuman; Iwema, Carrie L.
2013-01-01
This case study investigated whether data gathered from discussions within the social media provide a reliable basis for a biomedical resources recommendation system. Using a search query to mine text from Google Blogs and Discussions, a ranking of biomedical resources was determined based on those most frequently mentioned. To establish quality, these results were compared to rankings by subject experts. An overall agreement between the frequency of social media discussions and subject expert recommendations was observed when identifying key bioinformatics and consumer health resources. Testing the method in more than one biomedical area implies this procedure could be employed across different subjects. PMID:24180648
NASA Technical Reports Server (NTRS)
Crosby, Robert H.
1992-01-01
The Integrated Receiver/Decoder (IRD) currently used on the Space Shuttle was designed in the 1980 and prior time frame. Over the past 12 years, several parts have become obsolete or difficult to obtain. As directed by the Marshall Space Flight Center, a primary objective is to investigate updating the IRD design using the latest technology subsystems. To take advantage of experience with the current designs, an analysis of failures and a review of discrepancy reports, material review board actions, scrap, etc. are given. A recommended new design designated as the Advanced Receiver/Decoder (ARD) is presented. This design uses the latest technology components to simplify circuits, improve performance, reduce size and cost, and improve reliability. A self-test command is recommended that can improve and simplify operational procedures. Here, the new design is contrasted with the old. Possible simplification of the total Range Safety System is discussed, as is a single-step crypto technique that can improve and simplify operational procedures.
Strum, David P; May, Jerrold H; Sampson, Allan R; Vargas, Luis G; Spangler, William E
2003-01-01
Variability inherent in the duration of surgical procedures complicates surgical scheduling. Modeling the duration and variability of surgeries might improve time estimates. Accurate time estimates are important operationally to improve utilization, reduce costs, and identify surgeries that might be considered outliers. Surgeries with multiple procedures are difficult to model because they are difficult to segment into homogenous groups and because they are performed less frequently than single-procedure surgeries. The authors studied, retrospectively, 10,740 surgeries each with exactly two CPTs and 46,322 surgical cases with only one CPT from a large teaching hospital to determine if the distribution of dual-procedure surgery times fit more closely a lognormal or a normal model. The authors tested model goodness of fit to their data using Shapiro-Wilk tests, studied factors affecting the variability of time estimates, and examined the impact of coding permutations (ordered combinations) on modeling. The Shapiro-Wilk tests indicated that the lognormal model is statistically superior to the normal model for modeling dual-procedure surgeries. Permutations of component codes did not appear to differ significantly with respect to total procedure time and surgical time. To improve individual models for infrequent dual-procedure surgeries, permutations may be reduced and estimates may be based on the longest component procedure and type of anesthesia. The authors recommend use of the lognormal model for estimating surgical times for surgeries with two component procedures. Their results help legitimize the use of log transforms to normalize surgical procedure times prior to hypothesis testing using linear statistical models. Multiple-procedure surgeries may be modeled using the longest (statistically most important) component procedure and type of anesthesia.
Modification of Rhodamine WT tracer tests procedure in activated sludge reactors
NASA Astrophysics Data System (ADS)
Knap, Marta; Balbierz, Piotr
2017-11-01
One of the tracers recommended for use in wastewater treatment plants and natural waters is Rhodamine WT, which is a fluorescent dye, allowing to work at low concentrations, but may be susceptible to sorption to activated sludge flocs and chemical quenching of fluorescence by dissolved water constituents. Additionally raw sewage may contain other natural materials or pollutants exhibiting limited fluorescent properties, which are responsible for background fluorescence interference. This paper presents the proposed modifications to the Rhodamine WT tracer tests procedure in activated sludge reactors, which allow to reduce problems with background fluorescence and tracer loss over time, developed on the basis of conducted laboratory and field experiments.
NASA Astrophysics Data System (ADS)
Smith, R. J.
1984-10-01
The major issues in the controversy over the discovery of millions of defective microchips sold to the DOD by the Texas Instruments (TI) corporation are outlined. Defects in the microcircuits are blamed on inadequate testing procedures performed by TI during manufacture, and on inadequate testing procedures used by a subcontractor especially contracted to test the chips. Because the problem persisted over a period of years, defects might be possible in as many as 100 million chips used in a broad range of military applications including the Trident submarine, the B-52, B-1B, F-15, F-111, F-4, A-6, and A-7 aircraft, the Harpoon and HARM missile systems, and the Space Shuttles Discovery and Challenger. It is pointed out that although TI has accepted responsibility for the defective chips, little will be done by the DOD to compel the company to replace them, or to upgrade testing procedures. It is concluded that the serious nature of the problem could renew interest in recommendations for the standardization of military microcircuits.
20 CFR 702.272 - Informal recommendation by district director.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Informal recommendation by district director... PROCEDURE Claims Procedures Discrimination § 702.272 Informal recommendation by district director. (a) If... employer and employee accept the district director's recommendation, it will be incorporated in an order...
NASA Technical Reports Server (NTRS)
Thomas, R. E.; Gaines, G. B.
1978-01-01
Recommended design procedures to reduce the complete factorial design by retaining information on anticipated important interaction effects, and by generally giving up information on unconditional main effects are discussed. A hypothetical photovoltaic module used in the test design is presented. Judgments were made of the relative importance of various environmental stresses such as UV radiation, abrasion, chemical attack, temperature, mechanical stress, relative humidity and voltage. Consideration is given to a complete factorial design and its graphical representation, elimination of selected test conditions, examination and improvement of an engineering design, and parametric study. The resulting design consists of a mix of conditional main effects and conditional interactions and represents a compromise between engineering and statistical requirements.
Modifications in endoscopic practice for pediatric patients.
Lightdale, Jenifer R; Acosta, Ruben; Shergill, Amandeep K; Chandrasekhara, Vinay; Chathadi, Krishnavel; Early, Dayna; Evans, John A; Fanelli, Robert D; Fisher, Deborah A; Fonkalsrud, Lisa; Hwang, Joo Ha; Kashab, Mouen; Muthusamy, V Raman; Pasha, Shabana; Saltzman, John R; Cash, Brooks D
2014-05-01
We recommend that endoscopy in children be performed by pediatric-trained endoscopists whenever possible. We recommend that adult-trained endoscopists coordinate their services with pediatricians and pediatric specialists when they are needed to perform endoscopic procedures in children. We recommend that endoscopy be performed within 24 hours in symptomatic pediatric patients with known or suspected ingestion of caustic substances. We recommend emergent foreign-body removal of esophageal button batteries, as well as 2 or more rare-earth neodymium magnets. We recommend that procedural and resuscitative equipment appropriate for pediatric use should be readily available during endoscopic procedures. We recommend that personnel trained specifically in pediatric life support and airway management be readily available during sedated procedures in children. We recommend the use of endoscopes smaller than 6 mm in diameter in infants and children weighing less than 10 kg. We recommend the use of standard adult duodenoscopes for performing ERCP in children who weigh at least 10 kg. We recommend the placement of 12F or 16F percutaneous endoscopic gastrostomy tubes in children who weigh less than 50 kg.
Models and Estimation Procedures for the Analysis of Subjects-by-Items Data Arrays.
1982-06-30
Conclusions and recommendations The usefulness of Tukey’s model for model-based psychological testing is probably greatest for analyses of responses which are...22314 National Institute of Education Attn: TC 1200 19th Street NW Washington, DC 20208 Dr. William Graham Testing Directorate 1 Dr. Lorraine D. Eyde ...Educational Testing Service 1 Dr. Norman Cliff Princeton, NJ 08450 Dept. of Psychology Univ. of So. California 1 Dr. Ina Bilodeau University Park
Predicting abuse potential of stimulants and other dopaminergic drugs: overview and recommendations.
Huskinson, Sally L; Naylor, Jennifer E; Rowlett, James K; Freeman, Kevin B
2014-12-01
Examination of a drug's abuse potential at multiple levels of analysis (molecular/cellular action, whole-organism behavior, epidemiological data) is an essential component to regulating controlled substances under the Controlled Substances Act (CSA). We reviewed studies that examined several central nervous system (CNS) stimulants, focusing on those with primarily dopaminergic actions, in drug self-administration, drug discrimination, and physical dependence. For drug self-administration and drug discrimination, we distinguished between experiments conducted with rats and nonhuman primates (NHP) to highlight the common and unique attributes of each model in the assessment of abuse potential. Our review of drug self-administration studies suggests that this procedure is important in predicting abuse potential of dopaminergic compounds, but there were many false positives. We recommended that tests to determine how reinforcing a drug is relative to a known drug of abuse may be more predictive of abuse potential than tests that yield a binary, yes-or-no classification. Several false positives also occurred with drug discrimination. With this procedure, we recommended that future research follow a standard decision-tree approach that may require examining the drug being tested for abuse potential as the training stimulus. This approach would also allow several known drugs of abuse to be tested for substitution, and this may reduce false positives. Finally, we reviewed evidence of physical dependence with stimulants and discussed the feasibility of modeling these phenomena in nonhuman animals in a rational and practical fashion. This article is part of the Special Issue entitled 'CNS Stimulants'. Copyright © 2014 Elsevier Ltd. All rights reserved.
Technical Evaluation Motor No. 10 (TEM-10)
NASA Technical Reports Server (NTRS)
1993-01-01
Technical Evaluation Motor No. 10 (TEM-10) was static fired on 27 Apr. 1993 at the Thiokol Corporation full-scale motor static test bay, T-24. This final test report documents the procedures, performance, and results of the static test firing of TEM-10. All observations, discussions, conclusions, and recommendations contained are final. Included is a presentation and discussion of TEM-10 performance, anomalies, and test results in concurrence with the objectives outlined in CTP-0110, Revision D, Space Shuttle Technical Evaluation Motor No. 10 (TEM-10) Static Fire Test Plan.
DOT National Transportation Integrated Search
2008-09-01
In the first year of this project, a comprehensive review was made of the available models for : predicting the major distresses in flexible pavements, including cracking of asphalt layers and chemically : bound layers, permanent deformation of aspha...
Meta-Analysis of Academic Interventions Derived from Neuropsychological Data
ERIC Educational Resources Information Center
Burns, Matthew K.; Petersen-Brown, Shawna; Haegele, Katherine; Rodriguez, Megan; Schmitt, Braden; Cooper, Maureen; Clayton, Kate; Hutcheson, Shannon; Conner, Cynthia; Hosp, John; VanDerHeyden, Amanda M.
2016-01-01
Several scholars have recommended using data from neuropsychological tests to develop interventions for reading and mathematics. The current study examined the effects of using neuropsychological data within the intervention process with meta-analytic procedures. A total of 1,126 articles were found from an electronic search and compared to…
Photogrammetric camera calibration
Tayman, W.P.; Ziemann, H.
1984-01-01
Section 2 (Calibration) of the document "Recommended Procedures for Calibrating Photogrammetric Cameras and Related Optical Tests" from the International Archives of Photogrammetry, Vol. XIII, Part 4, is reviewed in the light of recent practical work, and suggestions for changes are made. These suggestions are intended as a basis for a further discussion. ?? 1984.
NASA Technical Reports Server (NTRS)
Trivedi, K. S. (Editor); Clary, J. B. (Editor)
1980-01-01
A computer aided reliability estimation procedure (CARE 3), developed to model the behavior of ultrareliable systems required by flight-critical avionics and control systems, is evaluated. The mathematical models, numerical method, and fault-tolerant architecture modeling requirements are examined, and the testing and characterization procedures are discussed. Recommendations aimed at enhancing CARE 3 are presented; in particular, the need for a better exposition of the method and the user interface is emphasized.
[Cardiovascular assessment and management before non-cardiac surgery].
Schwarz, Stefanie; Bernheim, Alain M
2015-05-06
The preoperative cardiovascular risk management accounts for patient-related risk factors, the circumstances leading to the surgical procedure, and the risk of the operation. While urgent operations should not be delayed for cardiac testing, an elective surgical intervention should be postponed in unstable cardiac conditions. In stable cardiac situations, prophylactic coronary interventions to reduce the risk of perioperative complications are rarely indicated. Therefore, in most cases, the planned operation can be performed without previous cardiac stress testing or coronary angiography. Preoperative imaging stress testing is recommended for patients with poor functional capacities that are at high cardiovascular risk prior to a high-risk operation. According to the literature, preoperative prophylactic administration of betablockers and aspirin is controversial. Preoperative discontinuation of dual anti-platelet therapy within six months following drug-eluting stent implantation is not recommended.
Nielsen, Karoline Kragelund; de Courten, Maximilian; Kapur, Anil
2012-01-01
To address the risks of adverse pregnancy outcomes and future type 2 diabetes associated with gestational diabetes mellitus (GDM), its early detection and timely treatment is essential. In the absence of an international consensus, multiple different guidelines on screening and diagnosis of GDM have existed for a long time. This may be changing with the publication of the recommendations by the International Association of Diabetes and Pregnancy Study Groups. However, none of these guidelines take into account evidence from or ground realities of resource-poor settings. This study aimed to investigate whether GDM projects supported by the World Diabetes Foundation in developing countries utilize any of the internationally recommended guidelines for screening and diagnosis of GDM, explore experiences on applicability and usefulness of the guidelines and barriers if any, in implementing the guidelines. These projects have reached out to thousands of pregnant women through capacity building and improvement of access to GDM screening and diagnosis in the developing world and therefore provide a rich field experience on the applicability of the guidelines in resource-poor settings. A mixed methods approach using questionnaires and interviews was utilised to review 11 GDM projects. Two projects were conducted by the same partner; interviews were conducted in person or via phone by the first author with nine project partners and one responded via email. The interviews were analysed using content analysis. The projects use seven different screening procedures and diagnostic criteria and many do not completely adhere to one guideline alone. Various challenges in adhering to the recommendations emerged in the interviews, including problems with screening women during the recommended time period, applicability of some of the listed risk factors used for (pre-)screening, difficulties with reaching women for testing in the fasting state, time consuming nature of the tests, intolerance to high glucose load due to nausea, need for repeat tests, issues with scarcity of test consumables and lack of equipment making some procedures impossible to follow. Though an international consensus on screening and diagnosis for GDM is welcome, it should ensure that the recommendations take into account feasibility and applicability in low resource settings to ensure wider usage. We need to move away from purely academic discussions focusing on sensitivity and specificity to also include what can actually be done at the basic care level.
Dahling, D R; Wright, B A
1988-12-01
An improved concentration method using sample volumes as large as 1500 ml has been developed to monitor for viruses in wastewaters. Non-precipitating dry beef extract powder is added to wastewater samples to give a 3% concentration and mixed until dissolved. This is followed by the addition of Celite as a virus adsorbent. By manipulating pH, viruses are eluted from the Celite in small volumes of phosphate buffer. This procedure was further tested without the aid of the Celite additives using a precipitating beef extract powder and substituting FeCl3 as an alternate reagent for the Celite. Comparison testing was also made with the currently recommended cartridge and disc filter procedures. In all cases, the non-precipitating beef extract-Celite method gave higher recovery rates in highly polluted waters.
Problems in the disinfection of class 1 microbiology safety cabinets.
Everall, P H; Morris, C A; Oliver, P R; Becker, J F
1982-01-01
Microbiology safety cabinet disinfection procedures using formaldehyde have been tested. Tubercle bacilli were killed by concentrations of formaldehyde obtained by heating commercial formalin irrespective of whether the bacilli were in the cabinet free space or above the prefilters. However, Bacillus stearothermophilus spore papers for for the testing of low temperature steam/formaldehyde sterilisers were almost never sterilised and a strain of Staphylococcus epidermidis (NCTC 7944) showed a resistance intermediate between the B stearothermophilus spores and the tubercle bacilli. Tests using a vaccine strain of poliovirus type 3 indicated a considerable degree of resistance of the virus to the action of formaldehyde. No such resistance was demonstrated by vaccinia virus or echovirus 14. Chemical and biological evidence is presented which indicates that filter paper discs are an unsuitable carrier material for a challenge organism in testing the efficiency of any formaldehyde sterilising process. Recommendations are made towards developing a satisfactory test procedure. PMID:7047573
Duh, Helen Inseng; Grubliauskiene, Aiste; Dewitte, Siegfried
2016-01-01
It has been suggested that the consumption of unhealthy Westernized diet in a context of poverty and resultant food insecurity may have contributed to South-Africa's status of the third fattest country in the World. Considering that a number of South-Africans are reported to have experienced, or are still experiencing food insecurity, procedures which have been shown to reduce the consumption of unhealthy food in higher income countries may be ineffective in South-Africa. We thus tested the robustness of the so called pre-exposure procedure in South-Africa. We also tested the moderating role of childhood poverty in the pre-exposure procedure. With the pre-exposure procedure, a respondent is exposed to a tempting unhealthy food (e.g. candy) in a context that is designed such that eating the food interferes with a task goal. The typical result is that this procedure spills over and reduces consumption of similar tempting food later on. An experimental study conducted in a South-African laboratory showed that the pre-exposure effect is robust even with a sample, where food insecurity prevails. Childhood poverty did not moderate the effect. This study proves that behavioral procedures aimed at reducing the consumption of unhealthy food would be valuable in less rich non-Western countries. Further testing of the robustness of the pre-exposure effect is however recommended in other poorer food insecure countries. Copyright © 2015 Elsevier Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
Gates, Thomas S.; Johnson, Theodore F.; Whitley, Karen S.
2005-01-01
The objective of this report is to contribute to the independent assessment of the Space Shuttle External Tank Foam Material. This report specifically addresses material modeling, characterization testing, data reduction methods, and data pedigree. A brief description of the External Tank foam materials, locations, and standard failure modes is provided to develop suitable background information. A review of mechanics based analysis methods from the open literature is used to provide an assessment of the state-of-the-art in material modeling of closed cell foams. Further, this report assesses the existing material property database and investigates sources of material property variability. The report presents identified deficiencies in testing methods and procedures, recommendations for additional testing as required, identification of near-term improvements that should be pursued, and long-term capabilities or enhancements that should be developed.
Bush, Lynn W; Bartoshesky, Louis E; David, Karen L; Wilfond, Benjamin; Williams, Janet L; Holm, Ingrid A
2018-03-22
Disclaimer: This article is designed primarily as an educational resource for medical geneticists and other health care providers to help them provide quality patient care. Adherence to the information contained in this article does not necessarily assure a successful medical outcome. This information and any associated recommendations should not be considered inclusive of all proper procedures and tests or exclusive of other procedures and tests that are reasonably directed to obtaining the same results. In determining the propriety of any specific procedure or test, each provider should apply his or her own professional judgment to the specific clinical circumstances presented by the individual patient. It may be prudent, however, to document in the patient's record the rationale for any significant deviation from the recommendations set forth in this article. This article is copyrighted and is property of the American College of Medical Genetics and Genomics. All authors have filed conflict of interest statements with the American College of Medical Genetics and Genomics. Any conflicts have been resolved through a process approved by the Board of Directors. The American College of Medical Genetics and Genomics has neither solicited nor accepted any commercial involvement in the development of the content of this publication.Genetics in Medicine advance online publication, 22 March 2018; doi:10.1038/gim.2018.36.
Marret, H; Fauconnier, A; Chabbert-Buffet, N; Cravello, L; Golfier, F; Gondry, J; Agostini, A; Bazot, M; Brailly-Tabard, S; Brun, J-L; De Raucourt, E; Gervaise, A; Gompel, A; Graesslin, O; Huchon, C; Lucot, J-P; Plu-Bureau, G; Roman, H; Fernandez, H
2010-10-01
Normal menstrual periods last 3-6 days and involve blood loss of up to 80ml. Menorrhagia is defined as menstrual periods lasting more than 7 days and/or involving blood loss greater than 80ml. The prevalence of abnormal uterine bleeding (AUB) is estimated at 11-13% in the general population and increases with age, reaching 24% in those aged 36-40 years. A blood count for red cells+platelets to test for anemia is recommended on a first-line basis for women consulting for AUB whose history and/or bleeding score justify it. A pregnancy test by an hCG assay should be ordered. A speculum examination and Pap smear, according to the French High Health Authority guidelines should be performed early on to rule out any cervical disease. Pelvic ultrasound, both abdominal (suprapubic) and transvaginal, is recommended as a first-line procedure for the etiological diagnosis of AUB. Hysteroscopy or hysterosonography can be suggested as a second-line procedure. MRI is not recommended as a first-line procedure. In idiopathic AUB, the first-line treatment is medical, with efficacy ranked as follows: levonorgestrel IUD, tranexamic acid, oral contraceptives, either estrogens and progestins or synthetic progestins only, 21 days a month, or NSAIDs. When hormone treatment is contraindicated or immediate pregnancy is desired, tranexamic acid is indicated. Iron must be included for patients with iron-deficiency anemia. For women who do not wish to become pregnant in the future and who have idiopathic AUB, the long-term efficacy of conservative surgical treatment is greater than that of oral medical treatment. Placement of a levonorgestrel IUD (or administration of tranexamic acid by default) is recommended for women with idiopathic AUB. If this fails, a conservative surgical technique must be proposed; the choices include second-generation endometrial ablation techniques (thermal balloon, microwave, radiofrequency), or, if necessary, first-generation techniques (endometrectomy, roller-ball). A first-line hysterectomy is not recommended in this context. Should a hysterectomy be selected for functional bleeding, it should be performed by the vaginal or laparoscopic routes. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.
PSYCHOACOUSTICS: a comprehensive MATLAB toolbox for auditory testing.
Soranzo, Alessandro; Grassi, Massimo
2014-01-01
PSYCHOACOUSTICS is a new MATLAB toolbox which implements three classic adaptive procedures for auditory threshold estimation. The first includes those of the Staircase family (method of limits, simple up-down and transformed up-down); the second is the Parameter Estimation by Sequential Testing (PEST); and the third is the Maximum Likelihood Procedure (MLP). The toolbox comes with more than twenty built-in experiments each provided with the recommended (default) parameters. However, if desired, these parameters can be modified through an intuitive and user friendly graphical interface and stored for future use (no programming skills are required). Finally, PSYCHOACOUSTICS is very flexible as it comes with several signal generators and can be easily extended for any experiment.
PSYCHOACOUSTICS: a comprehensive MATLAB toolbox for auditory testing
Soranzo, Alessandro; Grassi, Massimo
2014-01-01
PSYCHOACOUSTICS is a new MATLAB toolbox which implements three classic adaptive procedures for auditory threshold estimation. The first includes those of the Staircase family (method of limits, simple up-down and transformed up-down); the second is the Parameter Estimation by Sequential Testing (PEST); and the third is the Maximum Likelihood Procedure (MLP). The toolbox comes with more than twenty built-in experiments each provided with the recommended (default) parameters. However, if desired, these parameters can be modified through an intuitive and user friendly graphical interface and stored for future use (no programming skills are required). Finally, PSYCHOACOUSTICS is very flexible as it comes with several signal generators and can be easily extended for any experiment. PMID:25101013
2010-02-08
variety of bedrock types including: igneous ( basalt , granite, and rhyolite), metamorphic (schist and gneiss), and sedimentary rocks of Quaternary...TerraLOC® Standard formulation was applied. Chemical dust suppressant formulations vary widely, to include salts, oils, fiber mixtures and synthetic
16 CFR 309.22 - Determining estimated cruising range.
Code of Federal Regulations, 2012 CFR
2012-01-01
... set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634-1993-05-20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by... part 51. Copies of SAE J1634-1993-05-20 may be obtained from the Society of Automotive Engineers, 400...
16 CFR 309.22 - Determining estimated cruising range.
Code of Federal Regulations, 2013 CFR
2013-01-01
... set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634-1993-05-20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by... part 51. Copies of SAE J1634-1993-05-20 may be obtained from the Society of Automotive Engineers, 400...
16 CFR 309.22 - Determining estimated cruising range.
Code of Federal Regulations, 2010 CFR
2010-01-01
... set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634-1993-05-20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by... part 51. Copies of SAE J1634-1993-05-20 may be obtained from the Society of Automotive Engineers, 400...
16 CFR 309.22 - Determining estimated cruising range.
Code of Federal Regulations, 2011 CFR
2011-01-01
... set forth in Society of Automotive Engineers (“SAE”) Surface Vehicle Recommended Practice SAE J1634-1993-05-20, “Electric Vehicle Energy Consumption and Range Test Procedure.” This incorporation by... part 51. Copies of SAE J1634-1993-05-20 may be obtained from the Society of Automotive Engineers, 400...
SEASPEAK: A Project in Applied Linguistics, Language Engineering, and Eventually ESP for Sailors.
ERIC Educational Resources Information Center
Strevens, Peter; Johnson, Edward
1983-01-01
Describes the establishment of SEASPEAK (an international maritime English), a restricted, regularized sublanguage for use in ship-to-ship and ship-to-shore communication. Discusses a project by which this sublanguage is being tested and developed, with the intention of producing a reference manual of recommended language and procedures of…
Intercomparison of U.S. Ballast Water Test Facilities
2012-11-01
with many of the requirements of the ETV Protocol, although in some aspects, they employed different approaches and processes . The ETV Protocol calls...and recommendations from the audit process will be reported separately by NSF (in preparation). Both TFs benefited from developing procedures needed...11 4.1.2 Development Process
ERIC Educational Resources Information Center
Pitner, Nancy J.; Russell, James S.
1986-01-01
This paper critically reviews studies of administrator work activities which follow the work of Henry Mintzberg (1973), concentrating on these shortcomings of the method: (1) procedural difficulties in coding; (2) design limitations of classifying activities; (3) inadequate testing of Mintzberg's hypotheses; and (4) failure to explore antecedents…
40 CFR 240.208-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Operations. 240.208-3 Section 240.208-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended...
40 CFR 240.210-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Operations. 240.210-3 Section 240.210-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended...
40 CFR 240.202-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Operations. 240.202-3 Section 240.202-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended...
40 CFR 240.203-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Operations. 240.203-3 Section 240.203-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended...
Pulmonary Screening in Subjects after the Fontan Procedure.
Liptzin, Deborah R; Di Maria, Michael V; Younoszai, Adel; Narkewicz, Michael R; Kelly, Sarah L; Wolfe, Kelly R; Veress, Livia A
2018-05-07
To review the pulmonary findings of the first 51 patients who presented to our interdisciplinary single-ventricle clinic after undergoing the Fontan procedure. We performed an Institutional Review Board-approved retrospective review of 51 patients evaluated following the Fontan procedure. Evaluation included history, physical examination, pulmonary function testing, and 6-minute walk. Descriptive statistics were used to describe the population and testing data. Sixty-one percent of the patients had a pulmonary concern raised during the visit. Three patients had plastic bronchitis. Abnormal lung function testing was present in 46% of patients. Two-thirds (66%) of the patients had significant desaturation during the 6-minute walk test. Patients who underwent a fenestrated Fontan procedure and those who underwent unfenestrated Fontan were compared in terms of saturation and 6-minute walk test results. Sleep concerns were present in 45% of the patients. Pulmonary morbidities are common in patients after Fontan surgery and include plastic bronchitis, abnormal lung function, desaturations with walking, and sleep concerns. Abnormal lung function and obstructive sleep apnea may stress the Fontan circuit and may have implications for cognitive and emotional functioning. A pulmonologist involved in the care of patients after Fontan surgery can assist in screening for comorbidities and recommend interventions. Copyright © 2018 Elsevier Inc. All rights reserved.
Prescott, William A; Violanti, Kelsey C; Fusco, Nicholas M
2018-01-01
New York state requires day/summer camps to keep immunization records for all enrolled campers and strongly recommends requiring vaccination for all campers and staff. The objective of this study was to characterize immunization requirements/recommendations for children/adolescents enrolled in and staff employed at day/summer camps in New York state. An electronic hyperlink to a 9-question survey instrument was distributed via e-mail to 178 day/summer camps located in New York state cities with a population size greater than 100 000 people. A follow-up telephone survey was offered to nonresponders. The survey instrument included questions pertaining to vaccination documentation policies for campers/staff and the specific vaccines that the camp required/recommended. Fisher's exact and Chi-square tests were used to analyze categorical data. Sixty-five day/summer camps responded to the survey (36.5% response rate): 48 (73.8%) and 23 (41.8%) camps indicated having a policy/procedure for documenting vaccinations for campers and staff, respectively. Camps that had a policy/procedure for campers were more likely to have a policy/procedure for staff ( P = .0007). Age-appropriate vaccinations that were required/recommended for campers by at least 80% of camps included: measles, mumps, and rubella (MMR), diphtheria, tetanus, and pertussis (DTaP), hepatitis B, inactivated/oral poliovirus (IPV/OPV), Haemophilus influenzae type b (Hib), and varicella. Age-appropriate vaccinations that were required/recommended for staff by at least 80% of camps included: DTaP, hepatitis B, IPV/OPV, MMR, meningococcus, varicella, Hib, and tetanus, diphtheria, and pertussis (Tdap). Vaccination policies at day/summer camps in New York state appear to be suboptimal. Educational outreach may encourage camps to strengthen their immunization policies, which may reduce the transmission of vaccine-preventable diseases.
Measuring temperature rise during orthopaedic surgical procedures.
Manoogian, Sarah; Lee, Adam K; Widmaier, James C
2016-09-01
A reliable means for measuring temperatures generated during surgical procedures is needed to recommend best practices for inserting fixation devices and minimizing the risk of osteonecrosis. Twenty four screw tests for three surgical procedures were conducted using the four thermocouples in the bone and one thermocouple in the screw. The maximum temperature rise recorded from the thermocouple in the screw (92.7±8.9°C, 158.7±20.9°C, 204.4±35.2°C) was consistently higher than the average temperature rise recorded in the bone (31.8±9.3°C, 44.9±12.4°C, 77.3±12.7°C). The same overall trend between the temperatures that resulted from three screw insertion procedures was recorded with significant statistical analyses using either the thermocouple in the screw or the average of several in-bone thermocouples. Placing a single thermocouple in the bone was determined to have limitations in accurately comparing temperatures from different external fixation screw insertion procedures. Using the preferred measurement techniques, a standard screw with a predrilled hole was found to have the lowest maximum temperatures for the shortest duration compared to the other two insertion procedures. Future studies evaluating bone temperature increase need to use reliable temperature measurements for recommending best practices to surgeons. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.
To treat or not to treat: On what should surgical therapy be based?
Jones, James W; McCullough, Laurence B
2015-12-01
Dr C. Autious has just returned from the most prestigious vascular surgery meeting in America. At the meeting, one of the most prominent complex aneurysm surgeons arose to discuss a paper concerning a procedure he had developed and popularized over the last decade. Dr L. Uminous stunned the audience with his declaration that he no longer recommends that his namesake procedure be performed. Instead, he proclaimed that a new, radically different procedure be adopted immediately. He showed slides detailing the novel proposal but did not give data concerning results obtained. The recommended procedure is technically possible but seems to require a different skill set. Dr Autious has a patient scheduled for elective surgery that he had planned to use the Uminous procedure to treat. What should he do? A. Do the recommended procedure as best you can. B. Refer the patient to Dr Uminous. C. Offer the recommended procedure with full disclosure. D. Give full disclosure and let the patient decide which procedure to use. E. Put the procedure on hold until more information becomes available. Copyright © 2015 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.
NASA Technical Reports Server (NTRS)
1991-01-01
This recommendation contains the detailed specification of the logic required to carry out the Command Operations Procedures of the Transfer Layer. The Recommendation for Telecommand--Part 2, Data Routing Service contains the standard data structures and data communication procedures used by the intermediate telecommand system layers (the Transfer and Segmentation Layers). In particular, it contains a brief description of the Command Operations Procedures (COP) within the Transfer Layer. This recommendation contains the detailed definition of the COP's in the form of state tables, along with definitions of the terms used. It is assumed that the reader of this document is familiar with the data structures and terminology of part 2. In case of conflict between the description of the COP's in part 2 and in this recommendation, the definition in this recommendation will take precedence. In particular, this document supersedes section 4.3.3.1 through 4.3.3.4 of part 2.
15 CFR 10.7 - Procedure when a recommended standard is not supported by a consensus.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Procedure when a recommended standard is not supported by a consensus. 10.7 Section 10.7 Commerce and Foreign Trade Office of the Secretary... recommended standard is not supported by a consensus. If the Department determines that a recommended standard...
European guidelines for workplace drug testing in oral fluid.
Brcak, Michaela; Beck, Olof; Bosch, Tessa; Carmichael, Duncan; Fucci, Nadia; George, Claire; Piper, Mark; Salomone, Alberto; Schielen, Wim; Steinmeyer, Stefan; Taskinen, Sanna; Weinmann, Wolfgang
2018-03-01
These guidelines for Legally Defensible Workplace Drug Testing have been prepared and updated by the European Workplace Drug Testing Society (EWDTS). The European Guidelines are designed to establish best practice procedures whilst allowing individual countries to operate within the requirements of national customs and legislation. The EWDTS recommends that all European laboratories that undertake legally defensible workplace drug testing should use these guidelines as a template for accreditation. These guidelines are relevant to laboratory-based testing only. These guidelines follow current best practices and are constantly under review. Copyright © 2017 John Wiley & Sons, Ltd.
Validation of NHB 8060.1C, Test 18 Arc Tracking, September 30, 1991
NASA Technical Reports Server (NTRS)
Linley, Larry
2005-01-01
A test project was conducted to validate Test 18 of NASA Handbook (NHB) 8060.1C and, if necessary, identify and recommend improvements in the procedures or criteria of the test. The NHB 8060.1C, Test 18 test system was modified to produce better discrimination of test results. Changes, and their effects on test results, in the graphite immersion-depth, test timing sequence, and atmospheric conditions were investigated for the wire-insulation constructions tested. Based on the test results, the graphite immersion-depths (between 0.8 mm and 1.6 mm), the timing sequence, and the change in the test conditions from ambient to three environments common in manned spaceflight did not significantly affect test results. The criteria used in Test 18 of NHB 8060.1C was found to be appropriate for qualifying arc-tracking and arc-propagation characteristics of wire-insulation materials, Using the Test 18 criteria, Kapton and ETFE were considered inappropriate for use, while PTFE was considered appropriate. Recommendations from this test project for Test 18 of NHB 8060.1C include changing the experimental setup and configurational tests and performing qualification testing in air rather than in the three environments common in manned spaceflight.
Jager, E; Hausemann, A; Hofmann, H; Otto, U; Heudorf, U
2014-12-01
Endoscopy is an important part of modern medical diagnostics and therapy. The invasive procedures are however associated with a risk to transmit infections. Against this background the KRINKO has published the "Hygienic requirements for the reprocessing of flexible endoscopes and endoscopic accessories" in 2002 and has updated these recommendations in 2012. In 2003 and 2013 all gastroenterological facilities in Frankfurt am Main using flexible endoscopes were monitored for compliance with the recommendations. The inspections were performed after prior notice by a staff member of the health authority using a checklist which had been developed on the basis of the current KRINKO recommendations. In both years all institutions performing endoscopic procedures were visited: 2003 15 hospitals and 23 practices; 2013 14 clinics and 10 practices. In 2013 (data for 2003 in brackets) 100 % (93 %) of the hospitals and 60 % (22 %) of practices reprocessed their endoscopes by automated methods. The appropriate reprocessing and filling of water bottles for rinsing the scope channels with sterile water and the sterilisation of accessories were satisfactorily performed in 2003 and 2013 by all hospitals. However in 2013 only 90 % (2003: 74 %) of the practices correctly reprocessed water bottles and 80 % (52 %) used sterile water for filling the bottle. In 2013 100 % (2003: 57 %) of the practices correctly sterilised accessory instruments, while 2 practices used disposable, i. e., single-use materials. In 2013 all institutions performed microbiological tests according to KRINKO recommendations, while in 2003 all hospitals but only 43 % of the practices could present such tests. While the gastroenterological departments of Frankfurt hospitals already complied with the KRINKO recommendations in 2003, the inspection of several practices in 2003 had revealed considerable shortcomings in the implementation of these recommendations. Subsequently the practices have improved their hygiene management. © Georg Thieme Verlag KG Stuttgart · New York.
Advanced Multi-Axis Spine Testing: Clinical Relevance and Research Recommendations
Holsgrove, Timothy P.; Nayak, Nikhil R.; Welch, William C.
2015-01-01
Back pain and spinal degeneration affect a large proportion of the general population. The economic burden of spinal degeneration is significant, and the treatment of spinal degeneration represents a large proportion of healthcare costs. However, spinal surgery does not always provide improved clinical outcomes compared to non-surgical alternatives, and modern interventions, such as total disc replacement, may not offer clinically relevant improvements over more established procedures. Although psychological and socioeconomic factors play an important role in the development and response to back pain, the variation in clinical success is also related to the complexity of the spine, and the multi-faceted manner by which spinal degeneration often occurs. The successful surgical treatment of degenerative spinal conditions requires collaboration between surgeons, engineers, and scientists in order to provide a multi-disciplinary approach to managing the complete condition. In this review, we provide relevant background from both the clinical and the basic research perspectives, which is synthesized into several examples and recommendations for consideration in increasing translational research between communities with the goal of providing improved knowledge and care. Current clinical imaging, and multi-axis testing machines, offer great promise for future research by combining invivo kinematics and loading with in-vitro testing in six degrees of freedom to offer more accurate predictions of the performance of new spinal instrumentation. Upon synthesis of the literature, it is recommended that in-vitro tests strive to recreate as many aspects of the in-vivo environment as possible, and that a physiological preload is a critical factor in assessing spinal biomechanics in the laboratory. A greater link between surgical procedures, and the outcomes in all three anatomical planes should be considered in both the in-vivo and in-vitro settings, to provide data relevant to quality of motion, and stability. PMID:26273552
Recommendations for provoked challenge urine testing.
Ruha, Anne-Michelle
2013-12-01
"Urine mobilization test," "challenge test," and "provoked urine test" are all terms used to describe the administration of a chelating agent to a person prior to collection of their urine to test for metals. There is no standard, validated challenge test. Despite recommendations by professional and government organizations against the use of provoked urine testing, the tests are still commonly used and recommended by some practitioners. Challenge testing utilizes a variety of chelating agents, including dimercaptosuccinic acid (DMSA), dimercaptopropanesulfonate (DMPS), and ethylenediaminetetraacetic acid (EDTA). The agents are given by a variety of routes of administration, doses used are inconsistent, and urine collection procedures vary. Additional problems with challenge tests include comparison of results to inappropriate reference ranges and creatinine correction of urine obtained within hours of chelator administration. Human volunteer studies demonstrate that mercury is detected in the urine of most people even in the absence of known exposure or chelator administration, and that urinary mercury excretion rises after administration of a chelator, regardless of exposure history and in an unpredictable fashion. Studies also demonstrate that challenge testing fails to reveal a "body burden" of mercury due to remote exposure. Chelating agents have been associated with adverse reactions. Current evidence does not support the use of DMPS, DMSA, or other chelation challenge tests for the diagnosis of metal toxicity. Since there are no established reference ranges for provoked urine samples in healthy subjects, no reliable evidence to support a diagnostic value for the tests, and potential harm, these tests should not be utilized.
Automatic Generation of Conditional Diagnostic Guidelines.
Baldwin, Tyler; Guo, Yufan; Syeda-Mahmood, Tanveer
2016-01-01
The diagnostic workup for many diseases can be extraordinarily nuanced, and as such reference material text often contains extensive information regarding when it is appropriate to have a patient undergo a given procedure. In this work we employ a three task pipeline for the extraction of statements indicating the conditions under which a procedure should be performed, given a suspected diagnosis. First, we identify each instance in the text where a procedure is being recommended. Next we examine the context around these recommendations to extract conditional statements that dictate the conditions under which the recommendation holds. Finally, corefering recommendations across the document are linked to produce a full recommendation summary. Results indicate that each underlying task can be performed with above baseline performance, and the output can be used to produce concise recommendation summaries.
10 CFR 712.22 - Hearing officer's report and recommendation.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 10 Energy 4 2010-01-01 2010-01-01 false Hearing officer's report and recommendation. 712.22 Section 712.22 Energy DEPARTMENT OF ENERGY HUMAN RELIABILITY PROGRAM Establishment of and Procedures for the Human Reliability Program Procedures § 712.22 Hearing officer's report and recommendation. Within...
40 CFR 246.202-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... techniques. (b) Directly contacting buyers and determining the buyers' quality specifications, potential...
40 CFR 246.201-4 - Recommended procedures: Market study.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... research techniques. (b) Directly contacting buyers and determining the buyers' quality specifications...
40 CFR 246.202-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... techniques. (b) Directly contacting buyers and determining the buyers' quality specifications, potential...
40 CFR 246.202-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... techniques. (b) Directly contacting buyers and determining the buyers' quality specifications, potential...
40 CFR 246.201-4 - Recommended procedures: Market study.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... research techniques. (b) Directly contacting buyers and determining the buyers' quality specifications...
40 CFR 246.201-4 - Recommended procedures: Market study.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... research techniques. (b) Directly contacting buyers and determining the buyers' quality specifications...
Morán, V; Prieto, E; García-García, B; Barbés, B; Ribelles, M J; Richter, J Á; Martí-Climent, J M
2016-01-01
The aim of this study was to assess the dose received by members of the public due to close contact with patients undergoing nuclear medicine procedures during radiopharmaceutical incorporation, and comparing it with the emitted radiation dose when the test was complete, in order to establish recommendations. A prospective study was conducted on 194 patients. H*(10) dose rates were measured at 0.1, 0.5, and 1.0m after the radiopharmaceutical administration, before the image acquisition, and at the end of the nuclear medicine procedure. Effective dose for different close contact scenarios were calculated, according to 95th percentile value (bone scans) and the maximum value (remaining tests). During the radiopharmaceutical incorporation, a person who stays with another injected patient in the same waiting room may receive up to 0.59 mSv. If the patient had a medical appointment, or went to a restaurant or a coffee shop, members of the public could receive 23, 43, and 22 μSv, respectively. After finishing the procedure, these doses are reduced by a factor 3. In most of the studies, the use of private instead of public transport may reduce the dose by more than a factor 6. It is recommended to increase the distance between the patients during the radiopharmaceutical incorporation and to distribute them according to the diagnostic procedure. Patients should be encouraged to use private instead of public transport. Depending on the number of nuclear medicine outpatients per year attended by a physician, it could be necessary to apply restrictions. Copyright © 2015 Elsevier España, S.L.U. and SEMNIM. All rights reserved.
Precession-nutation procedures consistent with IAU 2006 resolutions
NASA Astrophysics Data System (ADS)
Wallace, P. T.; Capitaine, N.
2006-12-01
Context: .The 2006 IAU General Assembly has adopted the P03 model of Capitaine et al. (2003a) recommended by the WG on precession and the ecliptic (Hilton et al. 2006) to replace the IAU 2000 model, which comprised the Lieske et al. (1977) model with adjusted rates. Practical implementations of this new "IAU 2006" model are therefore required, involving choices of procedures and algorithms. Aims: .The purpose of this paper is to recommend IAU 2006 based precession-nutation computing procedures, suitable for different classes of application and achieving high standards of consistency. Methods: .We discuss IAU 2006 based procedures and algorithms for generating the rotation matrices that transform celestial to terrestrial coordinates, taking into account frame bias (B), P03 precession (P), P03-adjusted IAU 2000A nutation (N) and Earth rotation. The NPB portion can refer either to the equinox or to the celestial intermediate origin (CIO), requiring either the Greenwich sidereal time (GST) or the Earth rotation angle (ERA) as the measure of Earth rotation. Where GST is used, it is derived from ERA and the equation of the origins (EO) rather than through an explicit formula as in the past, and the EO itself is derived from the CIO locator. Results: .We provide precession-nutation procedures for two different classes of full-accuracy application, namely (i) the construction of algorithm collections such as the Standards Of Fundamental Astronomy (SOFA) library and (ii) IERS Conventions, and in addition some concise procedures for applications where the highest accuracy is not a requirement. The appendix contains a fully worked numerical example, to aid implementors and to illustrate the consistency of the two full-accuracy procedures which, for the test date, agree to better than 1 μas. Conclusions: .The paper recommends, for case (i), procedures based on angles to represent the PB and N components and, for case (ii), procedures based on series for the CIP X,Y. The two methods are of similar efficiency, and both support equinox based as well as CIO based applications.
Miller, Lauren S; Shelby, Rebecca A; Balmadrid, Melissa Hayes; Yoon, Sora; Baker, Jay A; Wildermann, Liz; Soo, Mary Scott
2016-11-01
The aim of this study was to evaluate patient anxiety and its association with perceived radiologist-patient communication in the setting of imaging-guided breast biopsy. After informed consent was obtained, 138 women recommended for imaging-guided breast procedures completed questionnaires immediately before and after biopsies, measuring state anxiety using the State-Trait Anxiety Inventory (range, 20-80). Before biopsies, women also completed questionnaires regarding their perceived communication with the radiologists recommending the procedures (modified Questionnaire on the Quality of Physician-Patient Interaction), demographic characteristics, and medical history; immediately after the biopsies, they completed a measure of perceived communication with the radiologists performing the biopsies. Experience levels (eg, attending radiologist, fellow) of the radiologists recommending and performing the biopsies were recorded. Data were analyzed using paired and independent t tests, one-way analysis of variance, Pearson's correlations, and multiple linear regression analyses. Average prebiopsy anxiety was 44.5 ± 12.4 (range, 20-77) on a scale ranging from 20 to 80 points. Perceived communication with radiologists recommending biopsies averaged 52.4 ± 11.5 (range, 18-65). Better communication with radiologists recommending biopsies was significantly associated with lower levels of prebiopsy anxiety (r = -0.22, P = .01). After the biopsies, women's anxiety significantly decreased (paired t = -7.32, P < .001). Better communication with radiologists performing biopsies (mean, 57.8 ± 8.4; range, 32-65) was associated with lower postbiopsy anxiety after accounting for patients' baseline anxiety levels (β = -0.17, P = .04). White women reported higher prebiopsy and postbiopsy anxiety; nonwhite women reported poorer communication with recommending radiologists. Patients' perceptions of better communication with radiologists were associated with lower levels of anxiety before and after biopsies. These results have implications for radiologist training and adherence to mammographic screening. Copyright © 2013 American College of Radiology. Published by Elsevier Inc. All rights reserved.
40 CFR 246.200-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... techniques; (b) Directly contacting buyers, and determining the buyers' quality specifications, the exact...
40 CFR 246.200-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... techniques; (b) Directly contacting buyers, and determining the buyers' quality specifications, the exact...
40 CFR 246.200-3 - Recommended procedures: Market study.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... techniques; (b) Directly contacting buyers, and determining the buyers' quality specifications, the exact...
Al-Mandeel, Hazem Mahmoud; Sagr, Emad; Sait, Khalid; Latifah, Hassan Mohamed; Al-Obaid, Abdulaziz; Al-Badawi, Ismail A; Alkushi, Abdulmohsen O; Salem, Hany; Massoudi, Nada S; Schunemann, Holger; Mustafa, Reem A; Brignardello-Petersen, Romina
2016-01-01
Cervical cancer is the third most common gynecological malignancy in Saudi women with an estimated incidence rate of 1.9 cases per 100 000 women-years. More than 40% of cervical cancer cases are diagnosed at advanced stages due to lack of a routine screening program in Saudi Arabia. Thus, national guidelines for routine screening and treatment of precancerous cervical lesions are needed. The Saudi Centre for Evidence-Based Healthcare invited a panel of local experts and partnered them with a team from McMaster University in Canada for methodological support, to develop national clinical practice guidelines on the screening and treatment of precancerous lesions for cervical cancer. After the panel identified key clinical questions, the McMaster University working group updated existing systematic reviews that had been used for the 2013 WHO Guidelines for screening and treatment of precancerous lesions for cervical cancer prevention. Recommendations were based on the GRADE (Grading of Recommendations, Assessment, Development and Evaluation) approach. Those recommendations took into account the available evidence, patient values and preferences, and resource use in the Saudi context. The panel provided recommendations on two major issues: screening for precancerous lesions (cervical intraepithelial neoplasia 2 & 3) and treatment of those lesions to prevent cervical cancer in women who tested positive after screening. The Saudi expert panel recommends using the HPV DNA test followed by colposcopy or cytology (Pap test) followed by colposcopy to screen for CIN2+ in women at risk of cervical cancer. The panel recommends cryotherapy or loop excision electrosurgery procedure (LEEP) over cold knife cone biopsy to treat women at risk of cervical cancer that tests positive for CIN2+. Universal screening for precancerous cervical dysplasia in women in Saudi Arabia is recommended using HPV testing and or cytology. Either cryotherapy or LEEP are preferred for treatment. National studies on cervical cancer screening modalities and treatment of precancerous cervical lesions, including HPV prevalence and its association with cervical cancer, are scarce.
Code of Federal Regulations, 2014 CFR
2014-01-01
... rulemaking recommendations before we issue an NPRM? 11.27 Section 11.27 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES GENERAL RULEMAKING PROCEDURES... before we issue an NPRM? Yes, the FAA obtains advice and recommendations from rulemaking advisory...
Code of Federal Regulations, 2011 CFR
2011-01-01
... rulemaking recommendations before we issue an NPRM? 11.27 Section 11.27 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES GENERAL RULEMAKING PROCEDURES... before we issue an NPRM? Yes, the FAA obtains advice and recommendations from rulemaking advisory...
Code of Federal Regulations, 2013 CFR
2013-01-01
... rulemaking recommendations before we issue an NPRM? 11.27 Section 11.27 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES GENERAL RULEMAKING PROCEDURES... before we issue an NPRM? Yes, the FAA obtains advice and recommendations from rulemaking advisory...
Code of Federal Regulations, 2012 CFR
2012-01-01
... rulemaking recommendations before we issue an NPRM? 11.27 Section 11.27 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES GENERAL RULEMAKING PROCEDURES... before we issue an NPRM? Yes, the FAA obtains advice and recommendations from rulemaking advisory...
Code of Federal Regulations, 2010 CFR
2010-01-01
... rulemaking recommendations before we issue an NPRM? 11.27 Section 11.27 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROCEDURAL RULES GENERAL RULEMAKING PROCEDURES... before we issue an NPRM? Yes, the FAA obtains advice and recommendations from rulemaking advisory...
Recommended Procedures for Handling Emergency Illnesses and Accidents at School.
ERIC Educational Resources Information Center
North Dakota State Dept. of Health, Bismarck.
Recommended procedures for handling emergency illnesses and accidents are provided in this guide for school personnel prepared by the North Dakota State Department of Health. Following five general recommendations for steps to take in emergency situations, advice and techniques are given for handling: nose bleeds; abdominal pain; toothaches and…
Guidelines for Proof Test Analysis
NASA Technical Reports Server (NTRS)
Chell, G. G.; McClung, R. C.; Kuhlman, C. J.; Russell, D. A.; Garr, K.; Donnelly, B.
1999-01-01
These guidelines integrate state-of-the-art elastic-plastic fracture mechanics (EPFM) and proof test implementation issues into a comprehensive proof test analysis procedure in the form of a road map which identifies the types of data, fracture mechanics based parameters, and calculations needed to perform flaw screening and minimum proof load analyses of fracture critical components. Worked examples are presented to illustrate the application of the road map to proof test analysis. The state-of-the art fracture technology employed in these guidelines is based on the EPFM parameter, J, and a pictorial representation of a J fracture analysis, called the failure assessment diagram (FAD) approach. The recommended fracture technology is validated using finite element J results, and laboratory and hardware fracture test results on the nickel-based superalloy Inconel 718, the aluminum alloy 2024-T3511, and ferritic pressure vessel steels. In all cases the laboratory specimens and hardware failed by ductile mechanisms. Advanced proof test analyses involving probability analysis and multiple-cycle proof testing (MCPT) are addressed. Finally, recommendations are provided on how to account for the effects of the proof test overload on subsequent service fatigue and fracture behaviors.
Code of Federal Regulations, 2010 CFR
2010-10-01
... S16.3.3.1.9 and S16.3.3.1.10. S16.3.5.4 Remove all slack from the lap belt. Pull the upper torso... device, introduce the maximum amount of slack into the upper torso belt that is recommended by the..., place the Type 2 manual belt around the test dummy and fasten the latch. Remove all slack from the lap...
Chlorine inactivation of fungal spores on cereal grains.
Andrews, S; Pardoel, D; Harun, A; Treloar, T
1997-04-01
Although 0.4% chlorine for 2 min has been recommended for surface disinfection of food samples before direct plating for fungal enumeration, this procedure may not be adequate for highly contaminated products. The effectiveness of a range of chlorine solutions was investigated using barley samples artificially contaminated with four different concentrations of Aspergillus flavus. A. niger, A. ochraceus, Eurotium repens, Penicillium brevicompactum P. chrysogenum and Cladosporium cladosporioides. At initial contamination levels greater than 10(4)/g, 0.4% chlorine did not inactivate sufficient spores to produce less than 20% contamination. Of the test fungi, ascospores of E. repens were the most resistant to chlorine inactivation, whereas the conidia of C. cladosporioides were the most sensitive. Rinsing the samples with 70% ethanol improved the effectiveness of the recommended surface disinfection procedure. However, some ethanol appears to permeate into the grains and may inactivate sensitive internal fungi, although a minimal effect only was observed on wheat infected with Alternaria.
Automation of Command and Data Entry in a Glovebox Work Volume: An Evaluation of Data Entry Devices
NASA Technical Reports Server (NTRS)
Steele, Marianne K.; Nakamura, Gail; Havens, Cindy; LeMay, Moira
1996-01-01
The present study was designed to examine the human-computer interface for data entry while performing experimental procedures within a glovebox work volume in order to make a recommendation to the Space Station Biological Research Project for a data entry system to be used within the Life Sciences Glovebox. Test subjects entered data using either a manual keypad, similar to a standard computer numerical keypad located within the glovebox work volume, or a voice input system using a speech recognition program with a microphone headset. Numerical input and commands were programmed in an identical manner between the two systems. With both electronic systems, a small trackball was available within the work volume for cursor control. Data, such as sample vial identification numbers, sample tissue weights, and health check parameters of the specimen, were entered directly into procedures that were electronically displayed on a video monitor within the glovebox. A pen and paper system with a 'flip-chart' format for procedure display, similar to that currently in use on the Space Shuttle, was used as a baseline data entry condition. Procedures were performed by a single operator; eight test subjects were used in the study. The electronic systems were tested under both a 'nominal' or 'anomalous' condition. The anomalous condition was introduced into the experimental procedure to increase the probability of finding limitations or problems with human interactions with the electronic systems. Each subject performed five test runs during a test day: two procedures each with voice and keypad, one with and one without anomalies, and one pen and paper procedure. The data collected were both quantitative (times, errors) and qualitative (subjective ratings of the subjects).
Screening the High-Risk Newborn for Hearing Loss: The Crib-O-Gram v the Auditory Brainstem Response.
ERIC Educational Resources Information Center
Cox, L. Clarke
1988-01-01
Presented are a rationale for identifying hearing loss in infancy and a history of screening procedures. The Crib-O-Gram and auditory brainstem response (ABR) tests are evaluated for reliability, validity, and cost-effectiveness. The ABR is recommended, and fully automated ABR instrumentation, which lowers expenses for trained personnel and…
ERIC Educational Resources Information Center
Stella, Carolyn Rose
Curriculum materials are provided for 15 vocational programs. Each course is divided into units, for which a lesson plan is provided. The lesson plans vary slightly by course but generally contain these components: unit title, goal and/or objective, content outline, rationale, procedures, a list of required materials, recommended form of…
ERIC Educational Resources Information Center
Yeo, Shelley; Chien, Robyn
2007-01-01
Procedures for responding consistently to plagiarism incidents are neither clear-cut nor easily implemented and yet inequitable treatment is intrinsically unfair. Classifying the seriousness of a plagiarism incident is problematic and penalties recommended for a given incident can vary greatly. This paper describes the development and testing of a…
A Pilot Study for Gainful Employment in Home Economics. Final Report. Volume I.
ERIC Educational Resources Information Center
Cozine, June; And Others
The major purpose of the study was to develop and test curriculum materials for three entry level gainful employment courses: Child Care Services, Clothing Services, Food Services. A second objective was to formulate recommendations for policies and procedures to follow in initiating and developing gainful employment programs in home economics.…
Beyea, Jason A; Rosen, Emily; Stephens, Trina; Nguyen, Paul; Hall, Stephen F
2018-02-01
Objective Tympanostomy tube (TT) insertion is the most common ambulatory surgery performed on children. American Academy of Otolaryngology-Head and Neck Surgery Founda-tion (AAO-HNSF) Clinical Practice Guidelines (CPGs) recommend hearing testing for all pediatric TT candidates. The aim of this study was to assess audiometric testing in this population. Study Design Retrospective population-based cohort study. Setting All hospitals in the Canadian province of Ontario. Subjects and Methods All patients 12 years of age and younger who underwent at least 1 TT procedure between January 1993 and June 2016. The primary outcomes were the percentage of patients who underwent a hearing test within 1 year before and/or 1 year after surgery. Results A total of 316,599 bilateral TT procedures were performed during the study period (1993 to 2016). Presurgical hearing tests increased from 55.7% to 74.9%, and postsurgical hearing tests increased from 42.2% to 68.9%. Younger surgeons demonstrated a greater adherence to the CPGs (relative risk [RR], 1.22; 95% CI, 1.08-1.38; P = .001). Remarkably, there was not a spike in preoperative hearing tests following the introduction of the CPGs in 2013 (RR, 1.12; 95% CI, 0.85-1.47; P = .432). Presurgical hearing testing ranged from 26.1% to 83.5% across health regions. Conclusion In this cohort of children who underwent TT placement, the trends of preoperative and postoperative audiometric testing are increasing but are still lower than recommended by the CPGs, despite a tripling of practicing audiologists. This study describes the current state of testing in Ontario and highlights issues of access to audiology services, possible parent preferences, and the importance of ongoing continuing medical education for all health care practitioners.
Technical Evaluation Motor No. 7 (TEM-7)
NASA Technical Reports Server (NTRS)
Hughes, Phil
1991-01-01
The Technical Evaluation Motor No. 7 (TEM-7) test was a full-scale, full duration static test firing of a high performance motor-configuration solid rocket motor with nozzle vectoring. The final test report documents the procedures, performance, and results of the static test firing of TEM-7. All observations, discussions, conclusions, and recommendations included in the report are complete and final except for the TEM-7 fixed housing unbond investigation. A presentation and discussion of TEM-7 performance, anomalies, and test result concurrence with the objectives outlined in CTP-0107, Rev A, Space Shuttle Technical Evaluation Motor No. 7 (TEM-7) Static Fire Test Plan are included.
The document is a recommended operating procedure, prepare or use in research activities conducted by EPA's Air and Energy Engineering Research Laboratory (AEERL). The procedure applies to the collection of gaseous grab samples from fossil fuel combustion sources for subsequent a...
RECOMMENDED OPERATING PROCEDURE NO. 45: ANALYSIS OF NITROUS OXIDE FROM COMBUSTION SOURCES
The recommended operating procedure (ROP) has been prepared for use in research activities conducted by EPA's Air and Energy Engineering Research Laboratory (AEERL). he procedure applies to the measurement of nitrous oxide (N2O) in dry gas samples extracted from gas streams where...
Vision Screening for Children 36 to <72 Months: Recommended Practices
Cotter, Susan A.; Cyert, Lynn A.; Miller, Joseph M.; Quinn, Graham E.
2015-01-01
ABSTRACT Purpose This article provides recommendations for screening children aged 36 to younger than 72 months for eye and visual system disorders. The recommendations were developed by the National Expert Panel to the National Center for Children’s Vision and Eye Health, sponsored by Prevent Blindness, and funded by the Maternal and Child Health Bureau of the Health Resources and Services Administration, United States Department of Health and Human Services. The recommendations describe both best and acceptable practice standards. Targeted vision disorders for screening are primarily amblyopia, strabismus, significant refractive error, and associated risk factors. The recommended screening tests are intended for use by lay screeners, nurses, and other personnel who screen children in educational, community, public health, or primary health care settings. Characteristics of children who should be examined by an optometrist or ophthalmologist rather than undergo vision screening are also described. Results There are two current best practice vision screening methods for children aged 36 to younger than 72 months: (1) monocular visual acuity testing using single HOTV letters or LEA Symbols surrounded by crowding bars at a 5-ft (1.5 m) test distance, with the child responding by either matching or naming, or (2) instrument-based testing using the Retinomax autorefractor or the SureSight Vision Screener with the Vision in Preschoolers Study data software installed (version 2.24 or 2.25 set to minus cylinder form). Using the Plusoptix Photoscreener is acceptable practice, as is adding stereoacuity testing using the PASS (Preschool Assessment of Stereopsis with a Smile) stereotest as a supplemental procedure to visual acuity testing or autorefraction. Conclusions The National Expert Panel recommends that children aged 36 to younger than 72 months be screened annually (best practice) or at least once (accepted minimum standard) using one of the best practice approaches. Technological updates will be maintained at http://nationalcenter.preventblindness.org. PMID:25562476
Price, Larry R; Raju, Nambury; Lurie, Anna; Wilkins, Charles; Zhu, Jianjun
2006-02-01
A specific recommendation of the 1999 Standards for Educational and Psychological Testing by the American Educational Research Association, the American Psychological Association, and the National Council on Measurement in Education is that test publishers report estimates of the conditional standard error of measurement (SEM). Procedures for calculating the conditional (score-level) SEM based on raw scores are well documented; however, few procedures have been developed for estimating the conditional SEM of subtest or composite scale scores resulting from a nonlinear transformation. Item response theory provided the psychometric foundation to derive the conditional standard errors of measurement and confidence intervals for composite scores on the Wechsler Preschool and Primary Scale of Intelligence-Third Edition.
Whitehead, W E; Delvaux, M
1997-02-01
An international working team of 13 investigators met on two occasions to develop guidelines for standardizing the procedures used to test gastrointestinal muscle tone and sensory thresholds using a barostat. General recommendations were: (1) Use a thin-walled plastic bag that is infinitely compliant until its capacity is reached. Maximum diameter of the bag should be much greater than the maximum diameter of the viscus. (2) The pump should be able to inflate the bag at up to 40 ml/sec. (3) Pressure should be monitored inside the bag, not in the pump or inflation line. (4) Subjects should be positioned so that the bag is close to the uppermost surface of the body. (5) For rectal tests, bowel cleansing should be limited to a tap water enema to minimize rectal irritation. Oral colonic lavage is recommended for studies of the proximal colon, and magnesium citrate enemas for the descending colon and sigmoid. (6) If sedation is required for colonic probe placement, allow at least one hour for drug washout and clearance of insufflated air. Ten to 20 min of adaptation before testing is adequate if no air or drugs were used. (7) The volumes reported must be corrected for the compressibility of gas and the compliance of the pump, which is greater for bellows pumps than for piston pumps. (8) Subjects should be tested in the fasted state. For evaluation of muscle tone: (9) The volume of the bag should be monitored for at least 15 min. For evaluation of sensory thresholds; (10) It is recommended that phasic distensions be > or = 60 sec long and that they be separated by > or = 60 sec. (11) Sensory thresholds should be reported as bag pressure rather than (or in addition to) bag volume because pressure is less vulnerable to measurement error. (12) Tests for sensory threshold should minimize psychological influences on perception by making the amount of each distension unpredictable to the subject. (13) Pain or other sensations should be reported on a graduated scale; not "yes-no." The working team recommends verbal descriptor scales, containing approximately seven steps, or visual analog scales in which subjects place a mark on a straight line marked "none" on one end and "maximum" on the other end. (14) It is recommended that subjects should be asked to rate the unpleasantness of distensions separately from their intensity.
10 CFR 10.32 - Recommendation of the NRC Personnel Security Review Panel.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 10 Energy 1 2012-01-01 2012-01-01 false Recommendation of the NRC Personnel Security Review Panel. 10.32 Section 10.32 Energy NUCLEAR REGULATORY COMMISSION CRITERIA AND PROCEDURES FOR DETERMINING... Procedures § 10.32 Recommendation of the NRC Personnel Security Review Panel. (a) The Deputy Executive...
10 CFR 10.32 - Recommendation of the NRC Personnel Security Review Panel.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 10 Energy 1 2010-01-01 2010-01-01 false Recommendation of the NRC Personnel Security Review Panel. 10.32 Section 10.32 Energy NUCLEAR REGULATORY COMMISSION CRITERIA AND PROCEDURES FOR DETERMINING... Procedures § 10.32 Recommendation of the NRC Personnel Security Review Panel. (a) The Deputy Executive...
10 CFR 10.32 - Recommendation of the NRC Personnel Security Review Panel.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 10 Energy 1 2011-01-01 2011-01-01 false Recommendation of the NRC Personnel Security Review Panel. 10.32 Section 10.32 Energy NUCLEAR REGULATORY COMMISSION CRITERIA AND PROCEDURES FOR DETERMINING... Procedures § 10.32 Recommendation of the NRC Personnel Security Review Panel. (a) The Deputy Executive...
Could accreditation bodies facilitate the implementation of medical guidelines in laboratories?
Aakre, Kristin M; Oosterhuis, Wytze P; Misra, Shivani; Langlois, Michel R; Joseph, Watine; Twomey, Patrick J; Barth, Julian H
2017-05-01
Several studies have shown that recommendations related to how laboratory testing should be performed and results interpreted are limited in medical guidelines and that the uptake and implementation of the recommendations that are available need improvement. The EFLM/UEMS Working Group on Guidelines conducted a survey amongst the national societies for clinical chemistry in Europe regarding development of laboratory-related guidelines. The results showed that most countries have guidelines that are specifically related to laboratory testing; however, not all countries have a formal procedure for accepting such guidelines and few countries have guideline committees. Based on this, the EFLM/UEMS Working Group on Guidelines conclude that there is still room for improvement regarding these processes in Europe and raise the question if the accreditation bodies could be a facilitator for an improvement.
Standard operating procedures for neurophysiologic assessment of male sexual dysfunction.
Giuliano, Francois; Rowland, David L
2013-05-01
Can neurophysiological testing in male patients with sexual dysfunction benefit the decision-making process? The answer remains unclear. To provide standard operating procedures for the neurophysiologic assessment of male sexual dysfunction. Medical literature was reviewed and combined with expert opinion of the authors. Bulbocavernosus reflex latency time, pudendal somatosensory evoked potentials, and sympathetic skin responses have been considered as potential candidates for the diagnosis and assessment of erectile dysfunction (ED). Currently, there is no consensus on a standardized methodology for these neurophysiological investigations in the overall assessment of ED. These procedures are unable to assess the integrity of the efferent parasympathetic proerectile penile innervation; accordingly, none of these assessment procedures is recommended for ED patients. Corpus cavernosum electromyography (CC-EMG) can detect abnormalities in cavernous smooth muscle although these alterations can be attributed both to damage to autonomic penile innervation and to degenerative processes of the cavernous smooth muscle. CC-EMG is still considered experimental. Evidence does not support that men with premature ejaculation (PE) are consistently characterized by penile hypersensitivity; accordingly, penile threshold determination is not recommended to in the diagnosis of PE. Neurophysiological investigation of other components of the penile sensory pathways in PE patients has not provided any definitive contribution to the diagnosis. No neurophysiological assessment procedures yield additional information that consistently aids in the assessment of PE and ED. © 2013 International Society for Sexual Medicine.
Zimmerman, Janice L; Sprung, Charles L
2010-04-01
To provide recommendations and standard operating procedures for intensive care unit and hospital preparations for an influenza pandemic or mass disaster with a specific focus on ensuring that adequate resources are available and appropriate protocols are developed to safely perform procedures in patients with and without influenza illness. Based on a literature review and expert opinion, a Delphi process was used to define the essential topics including performing medical procedures. Key recommendations include: (1) specify high-risk procedures (aerosol generating-procedures); (2) determine if certain procedures will not be performed during a pandemic; (3) develop protocols for safe performance of high-risk procedures that include appropriateness, qualifications of personnel, site, personal protection equipment, safe technique and equipment needs; (4) ensure adequate training of personnel in high-risk procedures; (5) procedures should be performed at the bedside whenever possible; (6) ensure safe respiratory therapy practices to avoid aerosols; (7) provide safe respiratory equipment; and (8) determine criteria for cancelling and/or altering elective procedures. Judicious planning and adoption of protocols for safe performance of medical procedures are necessary to optimize outcomes during a pandemic.
ERIC Educational Resources Information Center
Cheung, Chau-Kiu; Lok, David Ping-Pui; Chan, David Kin-keung
2005-01-01
Adjustment in university students admitted based on their high school counselors' or advisors' recommendation is an issue for revealing the appropriateness and fairness of the nontraditional admissions procedure. The newly-issued admissions procedure in Hong Kong has not been subject to empirical investigation. To evaluate the procedure, the…
Laboratory Diagnosis of Zika Virus Infection.
Landry, Marie Louise; St George, Kirsten
2017-01-01
-The rapid and accurate diagnosis of Zika virus infection is an international priority. -To review current recommendations, methods, limitations, and priorities for Zika virus testing. -Sources include published literature, public health recommendations, laboratory procedures, and testing experience. -Until recently, the laboratory diagnosis of Zika infection was confined to public health or research laboratories that prepared their own reagents, and test capacity has been limited. Furthermore, Zika cross-reacts serologically with other flaviviruses, such as dengue, West Nile, and yellow fever. Current or past infection, or even vaccination with another flavivirus, will often cause false-positive or uninterpretable Zika serology results. Detection of viral RNA during acute infection using nucleic acid amplification tests provides more specific results, and a number of commercial nucleic acid amplification tests have received emergency use authorization. In addition to serum, testing of whole blood and urine is recommended because of the higher vial loads and longer duration of shedding. However, nucleic acid amplification testing has limited utility because many patients are asymptomatic or present for testing after the brief period of Zika shedding has passed. Thus, the greatest need and most difficult challenge is development of accurate antibody tests for the diagnosis of recent Zika infection. Research is urgently needed to identify Zika virus epitopes that do not cross-react with other flavivirus antigens. New information is emerging at a rapid pace and, with ongoing public-private and international collaborations and government support, it is hoped that rapid progress will be made in developing robust and widely applicable diagnostic tools.
Technical and investigative support for high density digital satellite recording systems
NASA Technical Reports Server (NTRS)
Schultz, R. A.
1983-01-01
Recent results of dropout measurements and defect analysis conducted on one reel of Ampex 721 which was submitted for evaluation by the manufacturer are described. The results or status of other tape evaluation activities are also reviewed. Several changes in test interpretations and applications are recommended. In some cases, deficiencies in test methods or equipment became apparent during continued work on this project and other IITRI tape evaluation projects. Techniques and equipment for future tasks such as tape qualification are also recommended and discussed. Project effort and expenditures were kept at a relatively low level. This rate provided added development time and experience with the IITRI Dropout Measurement System, which is approaching its potential as a computer based dropout analysis tool. Another benefit is the expanded data base on critical parameters that can be achieved from tests on different tape types and lots as they become available. More consideration and effort was directed toward identification of critical parameters, development of meaningful repeatable test procedures, and tape procurement strategy.
Code of Federal Regulations, 2012 CFR
2012-01-01
... for Mycoplasma gallisepticum and M. synoviae. (a) DNA isolation. Isolate DNA from 1 mL of eluate from... supernatant DNA to a nuclease-free tube. Estimate the DNA concentration and purity by spectrophotometric... primer (50 μM), 1 μl Forward primer (50 μM). (2) Perform DNA amplification in a Perkin-Elmer 9600...
Code of Federal Regulations, 2014 CFR
2014-01-01
... for Mycoplasma gallisepticum and M. synoviae. (a) DNA isolation. Isolate DNA from 1 mL of eluate from... supernatant DNA to a nuclease-free tube. Estimate the DNA concentration and purity by spectrophotometric... primer (50 μM), 1 μl Forward primer (50 μM). (2) Perform DNA amplification in a Perkin-Elmer 9600...
Code of Federal Regulations, 2013 CFR
2013-01-01
... for Mycoplasma gallisepticum and M. synoviae. (a) DNA isolation. Isolate DNA from 1 mL of eluate from... supernatant DNA to a nuclease-free tube. Estimate the DNA concentration and purity by spectrophotometric... primer (50 μM), 1 μl Forward primer (50 μM). (2) Perform DNA amplification in a Perkin-Elmer 9600...
Code of Federal Regulations, 2012 CFR
2012-07-01
...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications § 1065.308 Continuous..., the gas concentrations must be adjusted to account for the dilution from ambient air drawn into the... recommended when blending span gases diluted in N2 with span gases diluted in air. You may use a multi-gas...
Code of Federal Regulations, 2013 CFR
2013-07-01
...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications § 1065.308 Continuous..., the gas concentrations must be adjusted to account for the dilution from ambient air drawn into the... recommended when blending span gases diluted in N2 with span gases diluted in air. You may use a multi-gas...
Wolfson, Daniel; Santa, John; Slass, Lorie
2014-07-01
Wise management of health care resources is a core tenet of medical professionalism. To support physicians in fulfilling this responsibility and to engage patients in discussions about unnecessary care, tests, and procedures, in April 2012 the American Board of Internal Medicine Foundation, Consumer Reports, and nine medical specialty societies launched the Choosing Wisely campaign. The authors describe the rationale for and history of the campaign, its structure and approach in terms of engaging both physicians and patients, lessons learned, and future steps.In developing the Choosing Wisely campaign, the specialty societies each developed lists of five tests and procedures that physicians and patients should question. Over 50 specialty societies have developed more than 250 evidence-based recommendations, some of which Consumer Reports has "translated" into consumer-friendly language and helped disseminate to tens of millions of consumers. A number of delivery systems, specialty societies, state medical societies, and regional health collaboratives are also advancing the campaign's recommendations. The campaign's success lies in its unique focus on professional values and patient-physician conversations to reduce unnecessary care. Measurement and evaluation of the campaign's impact on attitudinal and behavioral change is needed.
WHO Expert Committee on Specifications for Pharmaceutical Preparations.
2009-01-01
The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new standards and guidelines were adopted and recommended for use: the current list of available International Chemical Reference Substances and International Infrared Reference Spectra; guidelines on stability testing of active pharmaceutical ingredients and finished pharmaceutical products; procedure for prequalification of pharmaceutical products; and the procedure for assessing the acceptability, in principle, of active pharmaceutical ingredients for use in pharmaceutical products.
Is my bottom-up uncertainty estimation on metal measurement adequate?
NASA Astrophysics Data System (ADS)
Marques, J. R.; Faustino, M. G.; Monteiro, L. R.; Ulrich, J. C.; Pires, M. A. F.; Cotrim, M. E. B.
2018-03-01
Is the estimated uncertainty under GUM recommendation associated with metal measurement adequately estimated? How to evaluate if the measurement uncertainty really covers all uncertainty that is associated with the analytical procedure? Considering that, many laboratories frequently underestimate or less frequently overestimate uncertainties on its results; this paper presents the evaluation of estimated uncertainties on two ICP-OES procedures of seven metal measurements according to GUM approach. Horwitz function and proficiency tests scaled standard uncertainties were used in this evaluation. Our data shows that most elements expanded uncertainties were from two to four times underestimated. Possible causes and corrections are discussed herein.
Structural Tailoring of Advanced Turboprops (STAT)
NASA Technical Reports Server (NTRS)
Brown, Kenneth W.
1988-01-01
This interim report describes the progress achieved in the structural Tailoring of Advanced Turboprops (STAT) program which was developed to perform numerical optimizations on highly swept propfan blades. The optimization procedure seeks to minimize an objective function, defined as either direct operating cost or aeroelastic differences between a blade and its scaled model, by tuning internal and external geometry variables that must satisfy realistic blade design constraints. This report provides a detailed description of the input, optimization procedures, approximate analyses and refined analyses, as well as validation test cases for the STAT program. In addition, conclusions and recommendations are summarized.
USDA-ARS?s Scientific Manuscript database
Piglets reared in swine production in the US undergo painful procedures that include castration, tail docking, teeth clipping, and identification with ear notching or tagging. These procedures are usually performed without pain mitigation. The objective of this project was to develop recommendations...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Watkins, R.M.
1959-03-01
Developments relative to decontamination achieved under the Yankee Reasearch and Development program are reported. The decontamination of a large test loop which had been used to conduct corrosion rate studies for the Yankee reactor program is described. The basic permanganate-citrate decontamination procedure suggested for application in Yankee reactor primary system cleanup was used. A study of the chemistry of this decontamination operation is presented, together with conclusions pertaining to the effectiveness of the solutions under the conditions studied. In an attempt to further improve the efficiency of the procedure, an additional series of static and dynamic tests was performcd usingmore » contaminated sections of stainless steel tubing from the original SlW steam generator. Survival variables in the process (reagent composition, contact time, temperature, and flow velocity) were studied. The changes in decontamination efficiency produced by these variations are discussed and compared with results obtained throughthe use of similar procedures. Based on the observations made, conclusions are drawn concerning the optimum conditions for this cleanup process, a new set of suggested basic permanganate-citrate decontamination instructions is presented, and recommendations are made concerning future studies involving this procedure. (auth)« less
Internal quality control: planning and implementation strategies.
Westgard, James O
2003-11-01
The first essential in setting up internal quality control (IQC) of a test procedure in the clinical laboratory is to select the proper IQC procedure to implement, i.e. choosing the statistical criteria or control rules, and the number of control measurements, according to the quality required for the test and the observed performance of the method. Then the right IQC procedure must be properly implemented. This review focuses on strategies for planning and implementing IQC procedures in order to improve the quality of the IQC. A quantitative planning process is described that can be implemented with graphical tools such as power function or critical-error graphs and charts of operating specifications. Finally, a total QC strategy is formulated to minimize cost and maximize quality. A general strategy for IQC implementation is recommended that employs a three-stage design in which the first stage provides high error detection, the second stage low false rejection and the third stage prescribes the length of the analytical run, making use of an algorithm involving the average of normal patients' data.
Tracking people and cars using 3D modeling and CCTV.
Edelman, Gerda; Bijhold, Jurrien
2010-10-10
The aim of this study was to find a method for the reconstruction of movements of people and cars using CCTV footage and a 3D model of the environment. A procedure is proposed, in which video streams are synchronized and displayed in a 3D model, by using virtual cameras. People and cars are represented by cylinders and boxes, which are moved in the 3D model, according to their movements as shown in the video streams. The procedure was developed and tested in an experimental setup with test persons who logged their GPS coordinates as a recording of the ground truth. Results showed that it is possible to implement this procedure and to reconstruct movements of people and cars from video recordings. The procedure was also applied to a forensic case. In this work we experienced that more situational awareness was created by the 3D model, which made it easier to track people on multiple video streams. Based on all experiences from the experimental set up and the case, recommendations are formulated for use in practice. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.
McCarthy, Julie M; Van Iddekinge, Chad H; Lievens, Filip; Kung, Mei-Chuan; Sinar, Evan F; Campion, Michael A
2013-09-01
Considerable evidence suggests that how candidates react to selection procedures can affect their test performance and their attitudes toward the hiring organization (e.g., recommending the firm to others). However, very few studies of candidate reactions have examined one of the outcomes organizations care most about: job performance. We attempt to address this gap by developing and testing a conceptual framework that delineates whether and how candidate reactions might influence job performance. We accomplish this objective using data from 4 studies (total N = 6,480), 6 selection procedures (personality tests, job knowledge tests, cognitive ability tests, work samples, situational judgment tests, and a selection inventory), 5 key candidate reactions (anxiety, motivation, belief in tests, self-efficacy, and procedural justice), 2 contexts (industry and education), 3 continents (North America, South America, and Europe), 2 study designs (predictive and concurrent), and 4 occupational areas (medical, sales, customer service, and technological). Consistent with previous research, candidate reactions were related to test scores, and test scores were related to job performance. Further, there was some evidence that reactions affected performance indirectly through their influence on test scores. Finally, in no cases did candidate reactions affect the prediction of job performance by increasing or decreasing the criterion-related validity of test scores. Implications of these findings and avenues for future research are discussed. PsycINFO Database Record (c) 2013 APA, all rights reserved
An assessment of three different fire resistance tests for hydraulic fluids
NASA Astrophysics Data System (ADS)
Loftus, J. J.
1981-10-01
The Center for Fire Research at the National Bureau of Standards at the request of the Mine Safety and Health Administration (MSHA) and the Bureau of Mines made an evaluation or assessment of the three different flammability tests used by MSHA for measuring the fire resistance of hydraulic fluids intended for use in underground coal mining operations. The methods described in the Code of Federal Regulations Schedule 30, Part 35, consist of the following: an Autogenous Ignition Temperature Test, a Temperature-Pressure Spray Ignition Test, and a Test to Determine the Effect of Evaporation on the Flammability of Hydraulic Fluids. Recommendations for improvement of the three test procedures are provided.
Third phase of pocket-sized electronic dosimeter testing
DOE Office of Scientific and Technical Information (OSTI.GOV)
Fox, R.A.; Hooker, C.D.; Hogan, B.T.
1982-05-01
The experiences of industrial radiographers have indicated that electronic radiation-warning devices become inoperative when they are used under some types of ambient conditions. This report, as a follow-up to NUREG/CR-0554 and NUREG/CR-1452, documents the nature of tests performed on several additional commercially available models. None of the four models tested passed the tests for ruggedness and severe environmental conditions. However, all models passed most of the requirements of a Health Physics Society draft standard of performance specifications for these devices. The test procedures used in the project and the results obtained are discussed. Conclusions from the tests and recommendations concerningmore » potentially useful modifications to existing devices are presented.« less
[Management of breast nipple discharge: Recommendations].
Ouldamer, L; Kellal, I; Legendre, G; Ngô, C; Chopier, J; Body, G
2015-12-01
To investigate diagnostic value of imaging procedures and management strategies of the patients with nipple discharge (ND) to establish management recommendations. Bibliographical search in French and English languages by consultation of PubMed, Cochrane and Embase databases. Although, all ND require an systematic evaluation guided by clinical data, bloody ND could be a predictor of breast cancer risk among different colors of discharge particularly in patients of more than 50 years (LE2). The mammography and breast ultrasography are the imaging procedures to realize in first intention (grade C) but they turn out useful only when they detect radiological abnormalities (LE4). Galactography has only a localizing value of possible ductal abnormalities (when standard imaging procedures is not contributive) (LE4). Thus, in the diagnostic investigation of a suspicious ND, galactography it is not recommended in standard practice (grade C). The breast Magnetic Resonance Imaging (MRI) is recommended when breast standard imaging procedures are not contributive (grade C). The ND cytology is useful only if it is positive (i.e. reveal cancer cells). There is no proof on the diagnostic performance of the cytological analysis of the ND to allow a recommendation on its realization or not. In front of a suspicious ND, when breast-imaging procedures reveals an associated radiological lesion, an adapted percutaneous biopsy is recommended by percutaneous way (grade C). Vacuum-assisted breast biopsies is a diagnostic tool but can also be therapeutic allowing to avoid surgery in case of benign lesion but current literature data do not allow recommendations on the therapeutic aspect of vacuum-assisted breast biopsy (LE4). In the absence of associated radiological signal, and in case of reproducible bloody persistent ND, a pyramidectomy is recommended (grade C). Copyright © 2015 Elsevier Masson SAS. All rights reserved.
NASA Technical Reports Server (NTRS)
1971-01-01
The findings, conclusions, and recommendations relative to the investigations conducted to evaluate tests for classifying pyrotechnic materials and end items as to their hazard potential are presented. Information required to establish an applicable means of determining the potential hazards of pyrotechnics is described. Hazard evaluations are based on the peak overpressure or impulse resulting from the explosion as a function of distance from the source. Other hazard classification tests include dust ignition sensitivity, impact ignition sensitivity, spark ignition sensitivity, and differential thermal analysis.
NASA Contractor Report: Guidelines for Proof Test Analysis
NASA Technical Reports Server (NTRS)
Chell, G. G.; McClung, R. C.; Kuhlman, C. J.; Russell, D. A.; Garr, K.; Donnelly, B.
1997-01-01
These Guidelines integrate state-of-the-art Elastic-Plastic Fracture Mechanics (EPFM) and proof test implementation issues into a comprehensive proof test analysis procedure in the form of a Road Map which identifies the types of data, fracture mechanics based parameters, and calculations needed to perform flaw screening and minimum proof load analyses of fracture critical components. Worked examples are presented to illustrate the application of the Road Map to proof test analysis. The state-of-the-art fracture technology employed in these Guidelines is based on the EPFM parameter, J, and a pictorial representation of a J fracture analysis, called the Failure Assessment Diagram (FAD) approach. The recommended fracture technology is validated using finite element J results, and laboratory and hardware fracture test results on the nickel-based superalloy IN-718, the aluminum alloy 2024-T351 1, and ferritic pressure vessel steels. In all cases the laboratory specimens and hardware failed by ductile mechanisms. Advanced proof test analyses involving probability analysis and Multiple Cycle Proof Testing (MCPT) are addressed. Finally, recommendations are provided on to how to account for the effects of the proof test overload on subsequent service fatigue and fracture behaviors.
Best practices in passive remote sensing VNIR hyperspectral system hardware calibrations
Jablonski, Joseph; Durell, Christopher; Slonecker, Terry; Wong, Kwok; Simon, Blair; Eichelberger, Andrew; Osterberg, Jacob
2016-01-01
Hyperspectral imaging (HSI) is an exciting and rapidly expanding area of instruments and technology in passive remote sensing. Due to quickly changing applications, the instruments are evolving to suit new uses and there is a need for consistent definition, testing, characterization and calibration. This paper seeks to outline a broad prescription and recommendations for basic specification, testing and characterization that must be done on Visible Near Infra-Red grating-based sensors in order to provide calibrated absolute output and performance or at least relative performance that will suit the user’s task. The primary goal of this paper is to provide awareness of the issues with performance of this technology and make recommendations towards standards and protocols that could be used for further efforts in emerging procedures for national laboratory and standards groups.
Taghizadeh, Somayeh; Yang, Claus Chunli; R. Kanakamedala, Madhava; Morris, Bart; Vijayakumar, Srinivasan
2017-01-01
Purpose Magnetic resonance (MR) images are necessary for accurate contouring of intracranial targets, determination of gross target volume and evaluation of organs at risk during stereotactic radiosurgery (SRS) treatment planning procedures. Many centers use magnetic resonance imaging (MRI) simulators or regular diagnostic MRI machines for SRS treatment planning; while both types of machine require two stages of quality control (QC), both machine- and patient-specific, before use for SRS, no accepted guidelines for such QC currently exist. This article describes appropriate machine-specific QC procedures for SRS applications. Methods and materials We describe the adaptation of American College of Radiology (ACR)-recommended QC tests using an ACR MRI phantom for SRS treatment planning. In addition, commercial Quasar MRID3D and Quasar GRID3D phantoms were used to evaluate the effects of static magnetic field (B0) inhomogeneity, gradient nonlinearity, and a Leksell G frame (SRS frame) and its accessories on geometrical distortion in MR images. Results QC procedures found in-plane distortions (Maximum = 3.5 mm, Mean = 0.91 mm, Standard deviation = 0.67 mm, >2.5 mm (%) = 2) in X-direction (Maximum = 2.51 mm, Mean = 0.52 mm, Standard deviation = 0.39 mm, > 2.5 mm (%) = 0) and in Y-direction (Maximum = 13. 1 mm , Mean = 2.38 mm, Standard deviation = 2.45 mm, > 2.5 mm (%) = 34) in Z-direction and < 1 mm distortion at a head-sized region of interest. MR images acquired using a Leksell G frame and localization devices showed a mean absolute deviation of 2.3 mm from isocenter. The results of modified ACR tests were all within recommended limits, and baseline measurements have been defined for regular weekly QC tests. Conclusions With appropriate QC procedures in place, it is possible to routinely obtain clinically useful MR images suitable for SRS treatment planning purposes. MRI examination for SRS planning can benefit from the improved localization and planning possible with the superior image quality and soft tissue contrast achieved under optimal conditions. PMID:29487771
Fatemi, Ali; Taghizadeh, Somayeh; Yang, Claus Chunli; R Kanakamedala, Madhava; Morris, Bart; Vijayakumar, Srinivasan
2017-12-18
Purpose Magnetic resonance (MR) images are necessary for accurate contouring of intracranial targets, determination of gross target volume and evaluation of organs at risk during stereotactic radiosurgery (SRS) treatment planning procedures. Many centers use magnetic resonance imaging (MRI) simulators or regular diagnostic MRI machines for SRS treatment planning; while both types of machine require two stages of quality control (QC), both machine- and patient-specific, before use for SRS, no accepted guidelines for such QC currently exist. This article describes appropriate machine-specific QC procedures for SRS applications. Methods and materials We describe the adaptation of American College of Radiology (ACR)-recommended QC tests using an ACR MRI phantom for SRS treatment planning. In addition, commercial Quasar MRID 3D and Quasar GRID 3D phantoms were used to evaluate the effects of static magnetic field (B 0 ) inhomogeneity, gradient nonlinearity, and a Leksell G frame (SRS frame) and its accessories on geometrical distortion in MR images. Results QC procedures found in-plane distortions (Maximum = 3.5 mm, Mean = 0.91 mm, Standard deviation = 0.67 mm, >2.5 mm (%) = 2) in X-direction (Maximum = 2.51 mm, Mean = 0.52 mm, Standard deviation = 0.39 mm, > 2.5 mm (%) = 0) and in Y-direction (Maximum = 13. 1 mm , Mean = 2.38 mm, Standard deviation = 2.45 mm, > 2.5 mm (%) = 34) in Z-direction and < 1 mm distortion at a head-sized region of interest. MR images acquired using a Leksell G frame and localization devices showed a mean absolute deviation of 2.3 mm from isocenter. The results of modified ACR tests were all within recommended limits, and baseline measurements have been defined for regular weekly QC tests. Conclusions With appropriate QC procedures in place, it is possible to routinely obtain clinically useful MR images suitable for SRS treatment planning purposes. MRI examination for SRS planning can benefit from the improved localization and planning possible with the superior image quality and soft tissue contrast achieved under optimal conditions.
Robinson, Paul D; Latzin, Philipp; Ramsey, Kathryn A; Stanojevic, Sanja; Aurora, Paul; Davis, Stephanie D; Gappa, Monika; Hall, Graham L; Horsley, Alex; Jensen, Renee; Lum, Sooky; Milla, Carlos; Nielsen, Kim G; Pittman, Jessica E; Rosenfeld, Margaret; Singer, Florian; Subbarao, Padmaja; Gustafsson, Per M; Ratjen, Felix
2018-03-01
Obstructive airway disease is nonuniformly distributed throughout the bronchial tree, although the extent to which this occurs can vary among conditions. The multiple-breath washout (MBW) test offers important insights into pediatric lung disease, not available through spirometry or resistance measurements. The European Respiratory Society/American Thoracic Society inert gas washout consensus statement led to the emergence of validated commercial equipment for the age group 6 years and above; specific recommendations for preschool children were beyond the scope of the document. Subsequently, the focus has shifted to MBW applications within preschool subjects (aged 2-6 yr), where a "window of opportunity" exists for early diagnosis of obstructive lung disease and intervention. This preschool-specific technical standards document was developed by an international group of experts, with expertise in both custom-built and commercial MBW equipment. A comprehensive review of published evidence was performed. Recommendations were devised across areas that place specific age-related demands on MBW systems. Citing evidence where available in the literature, recommendations are made regarding procedures that should be used to achieve robust MBW results in the preschool age range. The present work also highlights the important unanswered questions that need to be addressed in future work. Consensus recommendations are outlined to direct interested groups of manufacturers, researchers, and clinicians in preschool device design, test performance, and data analysis for the MBW technique.
Space Stirling Cryocooler Contamination Lessons Learned and Recommended Control Procedures
NASA Astrophysics Data System (ADS)
Glaister, D. S.; Price, K.; Gully, W.; Castles, S.; Reilly, J.
The most important characteristic of a space cryocooler is its reliability over a lifetime typically in excess of 7 years. While design improvements have reduced the probability of mechanical failure, the risk of internal contamination is still significant and has not been addressed in a consistent approach across the industry. A significant fraction of the endurance test and flight units have experienced some performance degradation related to internal contamination. The purpose of this paper is to describe and assess the contamination issues inside long life, space cryocoolers and to recommend procedures to minimize the probability of encountering contamination related failures and degradation. The paper covers the sources of contamination, the degradation and failure mechanisms, the theoretical and observed cryocooler sensitivity, and the recommended prevention procedures and their impact. We begin with a discussion of the contamination sources, both artificial and intrinsic. Next, the degradation and failure mechanisms are discussed in an attempt to arrive at a contaminant susceptibility, from which we can derive a contamination budget for the machine. This theoretical sensitivity is then compared with the observed sensitivity to illustrate the conservative nature of the assumed scenarios. A number of lessons learned on Raytheon, Ball, Air Force Research Laboratory, and NASA GSFC programs are shared to convey the practical aspects of the contamination problem. Then, the materials and processes required to meet the proposed budget are outlined. An attempt is made to present a survey of processes across industry.
A componential view of children's difficulties in learning fractions.
Gabriel, Florence; Coché, Frédéric; Szucs, Dénes; Carette, Vincent; Rey, Bernard; Content, Alain
2013-01-01
Fractions are well known to be difficult to learn. Various hypotheses have been proposed in order to explain those difficulties: fractions can denote different concepts; their understanding requires a conceptual reorganization with regard to natural numbers; and using fractions involves the articulation of conceptual knowledge with complex manipulation of procedures. In order to encompass the major aspects of knowledge about fractions, we propose to distinguish between conceptual and procedural knowledge. We designed a test aimed at assessing the main components of fraction knowledge. The test was carried out by fourth-, fifth- and sixth-graders from the French Community of Belgium. The results showed large differences between categories. Pupils seemed to master the part-whole concept, whereas numbers and operations posed problems. Moreover, pupils seemed to apply procedures they do not fully understand. Our results offer further directions to explain why fractions are amongst the most difficult mathematical topics in primary education. This study offers a number of recommendations on how to teach fractions.
A componential view of children's difficulties in learning fractions
Gabriel, Florence; Coché, Frédéric; Szucs, Dénes; Carette, Vincent; Rey, Bernard; Content, Alain
2013-01-01
Fractions are well known to be difficult to learn. Various hypotheses have been proposed in order to explain those difficulties: fractions can denote different concepts; their understanding requires a conceptual reorganization with regard to natural numbers; and using fractions involves the articulation of conceptual knowledge with complex manipulation of procedures. In order to encompass the major aspects of knowledge about fractions, we propose to distinguish between conceptual and procedural knowledge. We designed a test aimed at assessing the main components of fraction knowledge. The test was carried out by fourth-, fifth- and sixth-graders from the French Community of Belgium. The results showed large differences between categories. Pupils seemed to master the part-whole concept, whereas numbers and operations posed problems. Moreover, pupils seemed to apply procedures they do not fully understand. Our results offer further directions to explain why fractions are amongst the most difficult mathematical topics in primary education. This study offers a number of recommendations on how to teach fractions. PMID:24133471
Gralnek, I M; Rabinovitz, R; Afik, D; Eliakim, R
2006-09-01
Initial studies on esophageal capsule endoscopy (PillCam ESO) reported excellent sensitivity and specificity, but these were followed by mixed results in several subsequent studies, probably due to deviations from the recommended ingestion protocol and the inconvenience of capsule ingestion in the supine position. The aim of this study was therefore to test a simplified ingestion procedure (SIP) for PillCam ESO. Using a cross-over study design, the SIP was prospectively compared with the original ingestion procedure for PillCam ESO in 24 healthy volunteers (15 men, nine women; mean age 44, range 27 - 70) and evaluated for: bubbles/saliva interference at the Z-line, Z-line circumferential visualization (quadrants), and convenience and ease of the ingestion procedure. All Rapid 4 videos were reviewed in a randomized manner and read by an experienced PillCam ESO reader blinded to the ingestion procedure used. It was found that the SIP significantly improved visualization in comparison with the original ingestion procedure, with less interference due to bubbles/saliva observed at the gastroesophageal junction ( P = 0.002) and improved visualization of the Z-line ( P = 0.025). Although the esophageal transit time was significantly faster with the SIP (3 : 45 min vs. 0 : 38 min; P = 0.0001), there were no differences in the number of Z-line frames/images captured. This new, simplified ingestion procedure for PillCam ESO provides significantly improved visualization of the Z-line in healthy volunteers. The overall test characteristics of PillCam ESO using SIP should be tested in patients with esophageal disease.
Langfelder-Schwind, Elinor; Karczeski, Barbara; Strecker, Michelle N; Redman, Joy; Sugarman, Elaine A; Zaleski, Christina; Brown, Trisha; Keiles, Steven; Powers, Amy; Ghate, Sumheda; Darrah, Rebecca
2014-02-01
To provide practice recommendations for genetic counselors whose clients are considering cystic fibrosis (CF) carrier testing or seeking information regarding CF molecular test results. The goals of these recommendations are to: 1) Provide updated information about the natural history, diagnosis, and treatment of CF and related conditions. 2) Supplement genetic counselors' knowledge and understanding of the available carrier screening and diagnostic testing options. 3) Describe the current state of genotype/phenotype correlations for CFTR mutations and an approach to interpreting both novel and previously described variants. 4) Provide a framework for genetic counselors to assist clients' decision-making regarding CF carrier testing, prenatal diagnosis, and pregnancy management. Disclaimer The practice guidelines of the National Society of Genetic Counselors (NSGC) are developed by members of the NSGC to assist genetic counselors and other health care providers in making decisions about appropriate management of genetic concerns; including access to and/or delivery of services. Each practice guideline focuses on a clinical or practice-based issue, and is the result of a review and analysis of current professional literature believed to be reliable. As such, information and recommendations within the NSGC practice guidelines reflect the current scientific and clinical knowledge at the time of publication, are only current as of their publication date, and are subject to change without notice as advances emerge.In addition, variations in practice, which take into account the needs of the individual patient and the resources and limitations unique to the institution or type of practice, may warrant approaches, treatments and/or procedures that differ from the recommendations outlined in this guideline. Therefore, these recommendations should not be construed as dictating an exclusive course of management, nor does the use of such recommendations guarantee a particular outcome. Genetic counseling practice guidelines are never intended to displace a health care provider's best medical judgment based on the clinical circumstances of a particular patient or patient population.Practice guidelines are published by NSGC for educational and informational purposes only, and NSGC does not "approve" or "endorse" any specific methods, practices, or sources of information.
Tumescent liposuction: standard guidelines of care.
Mysore, Venkataram
2008-01-01
Tumescent liposuction is a technique for the removal of subcutaneous fat under a special form of local anesthesia called tumescent anesthesia. PHYSICIAN'S QUALIFICATIONS: The physician performing liposuction should have completed postgraduate training in dermatology or a surgical specialty and should have had adequate training in dermatosurgery at a center that provides training in cutaneous surgery. In addition, the physician should obtain specific liposuction training or experience at the surgical table ("hands on") under the supervision of an appropriately trained and experienced liposuction surgeon. In addition to the surgical technique, training should include instruction in fluid and electrolyte balance, potential complications of liposuction, tumescent and other forms of anesthesia as well as emergency resuscitation and care. Liposuction can be performed safely in an outpatient day care surgical facility, or a hospital operating room. The day care theater should be equipped with facilities for monitoring and handling emergencies. A plan for handling emergencies should be in place with which all nursing staff should be familiar. A physician trained in emergency medical care and acute cardiac emergencies should be available in the premises. It is recommended but not mandatory, that an anesthetist be asked to stand by. Liposuction is recommended for all localized deposits of fat. Novices should restrict themselves to the abdomen, thighs, buttocks and male breasts. Arms, the medial side of the thigh and the female breast need more experience and are recommended for experienced surgeons. Liposuction may be performed for non-cosmetic indications such as hyperhidrosis of axillae after adequate experience has been acquired, but is not recommended for the treatment of obesity. Detailed history is to be taken with respect to any previous disease, drug intake and prior surgical procedures. Liposuction is contraindicated in patients with severe cardiovascular disease, severe coagulation disorders including thrombophilia, and during pregnancy. Physical evaluation should be detailed and should include assessment of general physical health to determine the fitness of the patient for surgery, as well as the examination of specific sites that need liposuction to check for potential problems. The patient should sign a detailed consent form listing details about the procedure and possible complications. The consent form should specifically state the limitations of the procedure and should mention whether more procedures are needed for proper results. The patient should be provided with adequate opportunity to seek information through brochures, computer presentations, and personal discussions. Preoperative laboratory studies to be performed include Hb%, blood counts including platelet counts, bleeding and clotting time (or prothrombin and activated partial thromboplastin time) and blood chemistry profile; ECG is advisable. Liver function tests, and pregnancy test for women of childbearing age are performed as mandated by the individual patient's requirements. Ultrasound examination is recommended in cases of gynecomastia. Preoperative antibiotics and non-sedative analgesics such as paracetamol are recommended. The choice of antibiotic and analgesic agents depends on the individual physician's preference and the prevailing local conditions. Lidocaine is the preferred local anesthetic; its recommended dose is 35-45 mg/kg and doses should not exceed 55 mg/kg wt. The recommended concentration of epinephrine in tumescent solutions is 0.25-1.5 mg/L. The total dosage of epinephrine should be minimized and should not exceed 50 microg/kg. t is always advisable not to combine liposuction with other procedures to avoid exceeding the recommended dosage of lignocaine. However, such combinations may be attempted if the total required dose of lignocaine does not exceed the maximum dose indicated above. The recommended cannula size for liposuction is not to be larger than 3.5 mm in diameter. The recommended volume of fat removed is in proportion to the fat content and/or size and/or weight of the patient being treated. It is recommended that the volume of fat removed not exceed 5000 mL in a single operative session. arge volume liposuctions or mega-liposuctions are not recommended. Baseline vital signs including blood pressure and heart rate, are recorded pre- and postoperatively. Pulse oximeter monitoring is essential in all cases. Postoperative antibiotics should be selected by the physician and taken for five days. Postoperative antiinflammatory drugs such as Cox 2 Inhibiters may be given for 5-7 days; specialized compression garments, binders, and tape help to reduce bruising, hematomas, seromas, and pain. Generally, compression is recommended for two weeks although this is variable according to the needs of the individual patient.
McFarlane, A; Aslan, B; Raby, A; Moffat, K A; Selby, R; Padmore, R
2015-12-01
Internal quality control (IQC) procedures are crucial for ensuring accurate patient test results. The IQMH Centre for Proficiency Testing conducted a web-based survey to gather information on the current IQC practices in coagulation testing. A questionnaire was distributed to 174 Ontario laboratories licensed to perform prothrombin time (PT) and activated partial thromboplastin time (APTT). All laboratories reported using two levels of commercial QC (CQC); 12% incorporate pooled patient plasma into their IQC program; >68% run CQC at the beginning of each shift; 56% following maintenance, with reagent changes, during a shift, or with every repeat sample; 6% only run CQC at the beginning of the day and 25% when the instruments have been idle for a defined period of time. IQC run frequency was determined by manufacturer recommendations (71%) but also influenced by the stability of test (27%), clinical impact of an incorrect test result (25%), and sample's batch number (10%). IQC was monitored using preset limits based on standard deviation (66%), precision goals (46%), or allowable performance limits (36%). 95% use multirules. Failure actions include repeating the IQC (90%) and reporting patient results; if repeat passes, 42% perform repeat analysis of all patient samples from last acceptable IQC. Variability exists in coagulation IQC practices among Ontario clinical laboratories. The recommendations presented here would be useful in encouraging standardized IQC practices. © 2015 John Wiley & Sons Ltd.
40 CFR 240.205-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
....205-2 Section 240.205-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... air pollution control technology. (b) All emissions, including dust from vents, should be controlled. ...
40 CFR 240.205-2 - Recommended procedures: Design.
Code of Federal Regulations, 2011 CFR
2011-07-01
....205-2 Section 240.205-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... air pollution control technology. (b) All emissions, including dust from vents, should be controlled. ...
Hudson-Shore, Michelle
2016-12-01
The Annual Statistics of Scientific Procedures on Living Animals Great Britain 2015 indicate that the Home Office were correct in recommending that caution should be exercised when interpreting the 2014 data as an apparent decline in animal experiments. The 2015 report shows that, as the changes to the format of the annual statistics have become more familiar and less problematic, there has been a re-emergence of the upward trend in animal research and testing in Great Britain. The 2015 statistics report an increase in animal procedures (up to 4,142,631) and in the number of animals used (up to 4,069,349). This represents 1% more than the totals in 2013, and a 7% increase on the procedures reported in 2014. This paper details an analysis of these most recent statistics, providing information on overall animal use and highlighting specific issues associated with genetically-altered animals, dogs and primates. It also reflects on areas of the new format that have previously been highlighted as being problematic, and concludes with a discussion about the use of animals in regulatory research and testing, and how there are significant missed opportunities for replacing some of the animal-based tests in this area. 2016 FRAME.
Chemoprophylaxis of infective endocarditis.
Finch, R
1990-01-01
Infective endocarditis is a serious disease with a continuing mortality of approximately 20%. Risk factors include a variety of congenital and acquired heart diseases. Infection follows an episode of bacteraemia which is most commonly due to oral bacteria, notably streptococci. Less commonly bacteraemia may arise from surgical procedures or diseases of the gastrointestinal and genitourinary tracts or from sepsis at other body sites, including intravenous drug abuse. Several societies and associations have published recommendations for the prevention of bacteraemia in those at risk from endocarditis through the use of perioperative antibiotic chemoprophylaxis. The recommendations are targetted at patients with defined cardiovascular lesions undergoing dental and other procedures known to predictably produce bacteraemia. The major recommendations for standard risk patients undergoing dental procedures without general anaesthesia is high-dose oral penicillin or amoxycillin. Alternative agents include erythromycin and clindamycin. For those requiring general anaesthesia, parenteral regimens are generally recommended although the British Society for Antimicrobial Chemotherapy permits an oral amoxycillin regimen 4 hours preoperatively. For specified gastrointestinal and genitourinary procedures a 2-drug regimen of ampicillin/amoxycillin (or vancomycin for penicillin-allergic patients) plus an aminoglycoside is generally recommended. The emphasis has been to simplify the earlier regimens without compromising the antimicrobial protection with a view to encouraging maximum compliance. The latter continues to be a problem where drug recommendations are either complex or include multiple drug or dosage recommendations. The emphasis on maintaining good dental health is endorsed by all authorities.
Aerodynamic and hydrodynamic model tests of the Enserch Garden Banks floating production facility
DOE Office of Scientific and Technical Information (OSTI.GOV)
Huang, E.W.; Bauer, T.C.; Kelly, P.J.
1995-12-01
This paper presents the results of aerodynamic and hydrodynamic model tests of the Enserch Garden Banks, a semisubmersible Floating Production Facility (FPF) moored in 2,190-ft waters. During the wind tunnel tests, the steady component of wind and current forces/moments at various skew and heel axes were measured. The results were compared and calibrated against analytical calculations using techniques recommended by ABS and API. During the wave basin recommend test the mooring line tensions and vessel motions including the effects of dynamic wind and current were measured. An analytical calculation of the airgap, vessel motions, and mooring line loads were comparedmore » with wave basin model test results. This paper discusses the test objectives, test setups and agendas for wind and wave basin testing of a deepwater permanently moored floating production system. The experience from these tests and the comparison of measured tests results with analytical calculations will be of value to designers and operators contemplating the use of a semisubmersible based floating production system. The analysis procedures are aimed at estimating (1) vessel motions, (2) airgap, and (3) mooring line tensions with reasonable accuracy. Finally, this paper demonstrates how the model test results were interpolated and adapted in the design loop.« less
NASA Technical Reports Server (NTRS)
1976-01-01
The recommendations, procedures, and techniques are summarized which provided by the Kodak Apparatus Division to the Ames Research Center to support the Earth Resources Aircraft Program at that facility. Recommendations, procedures, and calibration data are included for sensitometry, densitometry, laboratory cleanliness, and determination of camera exposure. Additional comments are made regarding process control procedures and general laboratory operations.
40 CFR 243.201-2 - Recommended procedures: Operations.
Code of Federal Regulations, 2014 CFR
2014-07-01
... equipment should meet the applicable provisions of the Occupational Safety and Health Administration... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Operations. 243.201-2 Section 243.201-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...
40 CFR 243.202-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Operations. 243.202-3 Section 243.202-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... receive periodic vehicle safety checks, including, but not limited to, inspection of brakes, windshield...
40 CFR 240.209-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Occupational Respiratory Disease, National Institute for Occupational Safety and Health, Morgantown, W. Va. (c... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Operations. 240.209-3 Section 240.209-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...
40 CFR 243.202-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Operations. 243.202-3 Section 243.202-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... receive periodic vehicle safety checks, including, but not limited to, inspection of brakes, windshield...
40 CFR 240.209-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Occupational Respiratory Disease, National Institute for Occupational Safety and Health, Morgantown, W. Va. (c... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommended procedures: Operations. 240.209-3 Section 240.209-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...
40 CFR 243.202-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommended procedures: Operations. 243.202-3 Section 243.202-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... receive periodic vehicle safety checks, including, but not limited to, inspection of brakes, windshield...
40 CFR 240.209-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Occupational Respiratory Disease, National Institute for Occupational Safety and Health, Morgantown, W. Va. (c... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Operations. 240.209-3 Section 240.209-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...
40 CFR 243.203-2 - Recommended procedures: Operations.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) The minimum collection frequency consistent with public health and safety should be adopted to... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommended procedures: Operations. 243.203-2 Section 243.203-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...
40 CFR 243.203-2 - Recommended procedures: Operations.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) The minimum collection frequency consistent with public health and safety should be adopted to... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommended procedures: Operations. 243.203-2 Section 243.203-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...
40 CFR 243.203-2 - Recommended procedures: Operations.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) The minimum collection frequency consistent with public health and safety should be adopted to... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Operations. 243.203-2 Section 243.203-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...
40 CFR 243.202-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Operations. 243.202-3 Section 243.202-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... receive periodic vehicle safety checks, including, but not limited to, inspection of brakes, windshield...
40 CFR 240.201-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
... carcasses, automobile bodies, dewatered sludges from water treatment plants, and industrial process wastes. ... WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... or excluded wastes inadvertently left at the facility should be considered in design. (b) Examples of...
40 CFR 240.204-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
....204-2 Section 240.204-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... indiscriminately. Consideration should be given to onsite treatment of process and waste waters before discharge...
40 CFR 240.207-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
....207-2 Section 240.207-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... attractive. The tipping, residue discharge, and waste salvage areas should be screened from public view, and...
40 CFR 240.201-2 - Recommended procedures: Design.
Code of Federal Regulations, 2011 CFR
2011-07-01
....201-2 Section 240.201-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... or excluded wastes inadvertently left at the facility should be considered in design. (b) Examples of...
40 CFR 246.200-8 - Recommended procedures: Cost analysis.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures..., storage, and transportation costs have been made, and estimated tonnages of both recoverable high-grade... for revenue from paper sales and savings from diverting recycled materials from disposal. Potential...
40 CFR 246.202-6 - Recommended procedures: Cost analysis.
Code of Federal Regulations, 2010 CFR
2010-07-01
..., storage and transportation costs have been made, and estimated tonnages of both recoverable material and...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... paper sales and savings from diverting recycled materials from disposal. Potential costs to upgrade...
40 CFR 246.201-7 - Recommended procedures: Cost analysis.
Code of Federal Regulations, 2010 CFR
2010-07-01
..., storage and transportation costs have been made, and estimated tonnages of both recoverable materials and...) SOLID WASTES SOURCE SEPARATION FOR MATERIALS RECOVERY GUIDELINES Requirements and Recommended Procedures... paper sales and savings from diverting recycled materials from disposal. Potential costs to upgrade...
16 CFR 1702.2 - Procedural requirements and recommendations.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Procedural requirements and recommendations. 1702.2 Section 1702.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS...
16 CFR 1702.2 - Procedural requirements and recommendations.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Procedural requirements and recommendations. 1702.2 Section 1702.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT REQUIREMENTS...
Splash Safety During Dermatologic Procedures Among US Dermatology Residents.
Korta, Dorota Z; Chapman, Lance W; Lee, Patrick K; Linden, Kenneth G
2017-07-01
Dermatologists are at potential risk of acquiring infections from contamination of the mucous membranes by blood and body fluids. However, there are little data on splash safety during procedural dermatology. To determine dermatology resident perceptions about splash risk during dermatologic procedures and to quantify the rate of protective equipment use. An anonymous on-line survey was sent to 108 United States ACGME-approved dermatology residency programs assessing frequency of facial protection during dermatologic procedures, personal history of splash injury, and, if applicable, reasons for not always wearing facial protection. A total of 153 dermatology residents responded. Rates of facial protection varied by procedure, with the highest rates during surgery and the lowest during local anesthetic injection. Over 54% of respondents reported suffering facial splash while not wearing facial protection during a procedure. In contrast, 88.9% of respondents correctly answered that there is a small risk of acquiring infection from mucosal splash. Residency program recommendations for facial protection seem to vary by procedure. The authors' results demonstrate that although facial splash is a common injury, facial protection rates and protective recommendations vary significantly by procedure. These data support the recommendation for enhanced facial protection guidelines during procedural dermatology.
NASA Technical Reports Server (NTRS)
Johnson, Kenneth L.; White, K. Preston, Jr.
2012-01-01
The NASA Engineering and Safety Center was requested to improve on the Best Practices document produced for the NESC assessment, Verification of Probabilistic Requirements for the Constellation Program, by giving a recommended procedure for using acceptance sampling by variables techniques as an alternative to the potentially resource-intensive acceptance sampling by attributes method given in the document. In this paper, the results of empirical tests intended to assess the accuracy of acceptance sampling plan calculators implemented for six variable distributions are presented.
Stranieri, Andrew; Abawajy, Jemal; Kelarev, Andrei; Huda, Shamsul; Chowdhury, Morshed; Jelinek, Herbert F
2013-07-01
This article addresses the problem of determining optimal sequences of tests for the clinical assessment of cardiac autonomic neuropathy (CAN). We investigate the accuracy of using only one of the recommended Ewing tests to classify CAN and the additional accuracy obtained by adding the remaining tests of the Ewing battery. This is important as not all five Ewing tests can always be applied in each situation in practice. We used new and unique database of the diabetes screening research initiative project, which is more than ten times larger than the data set used by Ewing in his original investigation of CAN. We utilized decision trees and the optimal decision path finder (ODPF) procedure for identifying optimal sequences of tests. We present experimental results on the accuracy of using each one of the recommended Ewing tests to classify CAN and the additional accuracy that can be achieved by adding the remaining tests of the Ewing battery. We found the best sequences of tests for cost-function equal to the number of tests. The accuracies achieved by the initial segments of the optimal sequences for 2, 3 and 4 categories of CAN are 80.80, 91.33, 93.97 and 94.14, and respectively, 79.86, 89.29, 91.16 and 91.76, and 78.90, 86.21, 88.15 and 88.93. They show significant improvement compared to the sequence considered previously in the literature and the mathematical expectations of the accuracies of a random sequence of tests. The complete outcomes obtained for all subsets of the Ewing features are required for determining optimal sequences of tests for any cost-function with the use of the ODPF procedure. We have also found two most significant additional features that can increase the accuracy when some of the Ewing attributes cannot be obtained. The outcomes obtained can be used to determine the optimal sequences of tests for each individual cost-function by following the ODPF procedure. The results show that the best single Ewing test for diagnosing CAN is the deep breathing heart rate variation test. Optimal sequences found for the cost-function equal to the number of tests guarantee that the best accuracy is achieved after any number of tests and provide an improvement in comparison with the previous ordering of tests or a random sequence. Copyright © 2013 Elsevier B.V. All rights reserved.
Applications of non-parametric statistics and analysis of variance on sample variances
NASA Technical Reports Server (NTRS)
Myers, R. H.
1981-01-01
Nonparametric methods that are available for NASA-type applications are discussed. An attempt will be made here to survey what can be used, to attempt recommendations as to when each would be applicable, and to compare the methods, when possible, with the usual normal-theory procedures that are avavilable for the Gaussion analog. It is important here to point out the hypotheses that are being tested, the assumptions that are being made, and limitations of the nonparametric procedures. The appropriateness of doing analysis of variance on sample variances are also discussed and studied. This procedure is followed in several NASA simulation projects. On the surface this would appear to be reasonably sound procedure. However, difficulties involved center around the normality problem and the basic homogeneous variance assumption that is mase in usual analysis of variance problems. These difficulties discussed and guidelines given for using the methods.
Xu, Gelin; Weber, Patrick; Hu, Qiaoling; Xue, Honggang; Audry, Laurent; Li, Chengping; Wu, Jie; Bourhy, Herve
2007-10-01
Monoclonal antibody (MAb)-based capture enzyme-linked immunosorbent assays (ELISA) were developed for the diagnosis of rabies-suspect specimens. A combination of four mouse monoclonal antibodies directed against the rabies virus nucleocapsid was selected and used for the detection. The test was optimized and standardized so that maximum concordance could be maintained with the standard procedures of rabies diagnosis recommended by the WHO expert committee. Using prototype viruses from the different genotypes of lyssavirus and from various geographic origins and phylogenetic lineages, this paper presents a reliable, rapid and transferable diagnostic method, named WELYSSA that readily permits the detection of lyssaviruses belonging to the 7 genotypes of lyssavirus circulating in Europe, Africa, Asia and Oceania. The threshold of detection of lyssavirus nucleocapsids is low (0.8 ng/ml). With a panel of 1030 specimens received for rabies diagnostic testing, this test was found to be highly specific (0.999) and sensitive (0.970) when compared to other recommended rabies diagnostic methods.
Evaluation of Chemical Coating Processes for AXAF
NASA Technical Reports Server (NTRS)
Engelhaupt, Darell; Ramsey, Brian; Mendrek, Mitchell
1998-01-01
The need existed at MSFC for the development and fabrication of radioisotope calibration sources of cadmium 109 and iron 55 isotopes. This was in urgent response to the AXA-F program. Several issues persisted in creating manufacturing difficulties for the supplier. In order to meet the MSFC requirements very stringent control needed to be maintained for the coating quality, specific activity and thickness. Due to the difficulties in providing the precisely controlled devices for testing, the delivery of the sources was seriously delayed. It became imperative that these fabrication issues be resolved to avoid further delays in this AXA-F observatory key component. The objectives are: 1) Research and provide expert advice on coating materials and procedures. 2) Research and recommend solutions to problems that have been experienced with the coating process. 3) Provide recommendations on the selection and preparation of substrates. 4) Provide consultation on the actual coating process including the results of the qualification and acceptance test programs. 5) Perform independent tests at UAH or MSFC as necessary.
Field joint protection system rain qualification test report
NASA Technical Reports Server (NTRS)
Cook, M.
1989-01-01
This report documents the procedures, performance, and results obtained from the Field Joint Protection System (FJPS) rain test. This test was performed to validate that the flight configuration FJPS prevents the accumulation of moisture in the redesigned solid rocket motor (RSRM) field joints when subjected to simulated prelaunch natural rain environments. The FJPS test article was exposed to rain simulation for approximately 50 minutes. During the test, water entered through the open upper end of the systems tunnel and was funneled down between the tunnel and case. A sealant void at the moisture seal butt splice allowed this water to flow underneath the FJPS. The most likely cause of voids was improper bondline preparation, particularly on the moisture seal surface. In total, water penetrated underneath approximately 60 percent of the FJPS circumference. Because the test article was substantially different from flight configuration (no systems tunnel closeout), results of this test will not affect current flight motors. Due to the omission of systems tunnel covers and systems tunnel floor plate closeout, the test assembly was not representative of flight hardware and resulted in a gross overtest. It is therefore recommended that the test be declared void. It is also recommended that the test be repeated with a complete closeout of the systems tunnel, sealed systems tunnel ends, and improved adhesive bondline preparation.
NASA Astrophysics Data System (ADS)
Kang, Jidong; Gianetto, James A.; Tyson, William R.
2018-03-01
Fracture toughness measurement is an integral part of structural integrity assessment of pipelines. Traditionally, a single-edge-notched bend (SE(B)) specimen with a deep crack is recommended in many existing pipeline structural integrity assessment procedures. Such a test provides high constraint and therefore conservative fracture toughness results. However, for girth welds in service, defects are usually subjected to primarily tensile loading where the constraint is usually much lower than in the three-point bend case. Moreover, there is increasing use of strain-based design of pipelines that allows applied strains above yield. Low-constraint toughness tests represent more realistic loading conditions for girth weld defects, and the corresponding increased toughness can minimize unnecessary conservatism in assessments. In this review, we present recent developments in low-constraint fracture toughness testing, specifically using single-edgenotched tension specimens, SENT or SE(T). We focus our review on the test procedure development and automation, round-robin test results and some common concerns such as the effect of crack tip, crack size monitoring techniques, and testing at low temperatures. Examples are also given of the integration of fracture toughness data from SE(T) tests into structural integrity assessment.
40 CFR 243.202-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Operations. 243.202-3 Section 243.202-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID... receive periodic vehicle safety checks, including, but not limited to, inspection of brakes, windshield...
40 CFR 243.201-2 - Recommended procedures: Operations.
Code of Federal Regulations, 2012 CFR
2012-07-01
... should meet the applicable provisions of the Occupational Safety and Health Administration Standards for... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Operations. 243.201-2 Section 243.201-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID...
40 CFR 240.209-3 - Recommended procedures: Operations.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Occupational Respiratory Disease, National Institute for Occupational Safety and Health, Morgantown, W. Va. (c... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Operations. 240.209-3 Section 240.209-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID...
40 CFR 243.203-2 - Recommended procedures: Operations.
Code of Federal Regulations, 2012 CFR
2012-07-01
... minimum collection frequency consistent with public health and safety should be adopted to minimize... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommended procedures: Operations. 243.203-2 Section 243.203-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID...
40 CFR 240.208-2 - Recommended procedures: Design.
Code of Federal Regulations, 2010 CFR
2010-07-01
....208-2 Section 240.208-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures... allow for removal from the site of residue or other solids in a manner that protects the environment. ...
Analysis of lead-acid battery accelerated testing data
NASA Astrophysics Data System (ADS)
Clifford, J. E.; Thomas, R. E.
1983-06-01
Battelle conducted an independent review and analysis of the accelerated test procedures and test data obtained by Exide in the 3 year Phase 1 program to develop advanced lead acid batteries for utility load leveling. Of special importance is the extensive data obtained in deep discharge cycling tests on 60 cells at elevated temperatures over a 2-1/2 year period. The principal uncertainty in estimating cell life relates to projecting cycle life data at elevated temperature to the lower operating temperatures. The accelerated positive grid corrosion test involving continuous overcharge at 500C provided some indication of the degree of grid corrosion that might be tolerable before failure. The accelerated positive material shedding test was not examined in any detail. Recommendations are made for additional studies.
Kerbrat, P; Lhommé, C; Fervers, B; Guastalla, J P; Thomas, L; Basuyau, J P; Duvillard, P; Cohen-Solal, C; Dauplat, J; Tournemaine, N
2000-12-09
Suprapubic and transvaginal pelvic ultrasound exploration is indicated for suspected ovarian tumor (standard). Diagnosis and search for extension require surgery and pathology examination. Systematic preoperative computed tomography is not recommended (standard). Surgery for cancer of the ovary is a specialized procedure requiring skill in cancer, gynecology, visceral surgery and laparoscopic surgery. If the patient is referred to a specialized center after a primary procedure considered to be inadequate, a new procedure is recommended for staging. Residual tumor volume after the primary procedure has prognostic value. Systematic second look procedures are not recommended for routine practice (standard). For patients with grade IA G1 tumors, there is no indication for complementary treatment (standard). For patients with grade IA G2-3 or clear cell tumors, IB, IC, IIA, there is no standard. no complementary treatment, complementary chemotherapy using platinum, complementary external abdominopelvic radiotherapy. A complementary treatment is recommended for grades IC and IIA. Complementary treatment for grades IIB (no residual tissue), IIC (with residual tissue), III (no residual tissue), is based on: complementary chemotherapy with platinium, complementary external abdominopelvic radiotherapy (options). Complementary treatment for advanced forms (IIB (with residual tissue), IIC (with residual tissue), III (with residual tissue) and IV) is based on polychemotherapy with platinium (standard). platinium combined with paclitaxel (intravenous), platinium combined with cyclophosphamide and/or doxorubicin (intravenous) or intraperitoneal cisplatin combined with cyclophosphamide (intravenous). The chemotherapy work-up includes physical examination, assay of serum markers (particularly CA125) and abdominopelvic computed tomography (proof level B) (standard). Physical examination is recommended for monitoring patients in complete remission with no sign of suspected recurrence (standard). This document was reviewed in April 1977. The working group again validated the Standards, OPTIONS and Recommendations, without modifications in June 1999.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wogman, Ned A.; Milbrath, Brian D.; Payne, Rosara F.
This paper is intended to serve as a scientific basis to start discussions of the available environmental sampling techniques and equipment that have been used in the past that could be considered for use within the context of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) on-site inspections (OSI). This work contains information on the techniques, equipment, costs, and some operational procedures associated with environmental sampling that have actually been used in the past by the United States for the detection of nuclear explosions. This paper also includes a discussion of issues, recommendations, and questions needing further study within the context of themore » sampling and analysis of aquatic materials, atmospheric gases, atmospheric particulates, vegetation, sediments and soils, fauna, and drill-back materials.« less
Skin prick/puncture testing in North America: a call for standards and consistency.
Fatteh, Shahnaz; Rekkerth, Donna J; Hadley, James A
2014-01-01
Skin prick/puncture testing (SPT) is widely accepted as a safe, dependable, convenient, and cost-effective procedure to detect allergen-specific IgE sensitivity. It is, however, prone to influence by a variety of factors that may significantly alter test outcomes, affect the accuracy of diagnosis, and the effectiveness of subsequent immunotherapy regimens. Proficiency in SPT administration is a key variable that can be routinely measured and documented to improve the predictive value of allergy skin testing. Literature surveys were conducted to determine the adherence to repeated calls for development and implementation of proficiency testing standards in the 1990's, the mid-2000's and the 2008 allergy diagnostics practice parameters. Authors publishing clinical research in peer-reviewed journals and conducting workshops at annual scientific meetings have recommended proficiency testing based primarily on its potential to reduce variability, minimize confounding test results, and promote more effective immunotherapeutic treatments. Very few publications of clinical studies, however, appear to report proficiency testing data for SPT performance. Allergen immunotherapy recommendations are updated periodically by the Joint Task Force on Practice Parameters representing the American Academy of Allergy, Asthma and Immunology (AAAAI), the American College of Allergy, Asthma and Immunology (ACAAI), and the Joint Council of Allergy, Asthma and Immunology (JCAAI). Despite consensus that all staff who perform SPT should meet basic quality assurance standards that demonstrate their SPT proficiency, the gap between recommendations and daily practice persists. By embracing standards, the accuracy of SPT and allergy diagnosis can be optimized, ultimately benefiting patients with allergic disease.
Stuart, Lauren N; Volmar, Keith E; Nowak, Jan A; Fatheree, Lisa A; Souers, Rhona J; Fitzgibbons, Patrick L; Goldsmith, Jeffrey D; Astles, J Rex; Nakhleh, Raouf E
2017-09-01
- A cooperative agreement between the College of American Pathologists (CAP) and the United States Centers for Disease Control and Prevention was undertaken to measure laboratories' awareness and implementation of an evidence-based laboratory practice guideline (LPG) on immunohistochemical (IHC) validation practices published in 2014. - To establish new benchmark data on IHC laboratory practices. - A 2015 survey on IHC assay validation practices was sent to laboratories subscribed to specific CAP proficiency testing programs and to additional nonsubscribing laboratories that perform IHC testing. Specific questions were designed to capture laboratory practices not addressed in a 2010 survey. - The analysis was based on responses from 1085 laboratories that perform IHC staining. Ninety-six percent (809 of 844) always documented validation of IHC assays. Sixty percent (648 of 1078) had separate procedures for predictive and nonpredictive markers, 42.7% (220 of 515) had procedures for laboratory-developed tests, 50% (349 of 697) had procedures for testing cytologic specimens, and 46.2% (363 of 785) had procedures for testing decalcified specimens. Minimum case numbers were specified by 85.9% (720 of 838) of laboratories for nonpredictive markers and 76% (584 of 768) for predictive markers. Median concordance requirements were 95% for both types. For initial validation, 75.4% (538 of 714) of laboratories adopted the 20-case minimum for nonpredictive markers and 45.9% (266 of 579) adopted the 40-case minimum for predictive markers as outlined in the 2014 LPG. The most common method for validation was correlation with morphology and expected results. Laboratories also reported which assay changes necessitated revalidation and their minimum case requirements. - Benchmark data on current IHC validation practices and procedures may help laboratories understand the issues and influence further refinement of LPG recommendations.
The transfer of analytical procedures.
Ermer, J; Limberger, M; Lis, K; Wätzig, H
2013-11-01
Analytical method transfers are certainly among the most discussed topics in the GMP regulated sector. However, they are surprisingly little regulated in detail. General information is provided by USP, WHO, and ISPE in particular. Most recently, the EU emphasized the importance of analytical transfer by including it in their draft of the revised GMP Guideline. In this article, an overview and comparison of these guidelines is provided. The key to success for method transfers is the excellent communication between sending and receiving unit. In order to facilitate this communication, procedures, flow charts and checklists for responsibilities, success factors, transfer categories, the transfer plan and report, strategies in case of failed transfers, tables with acceptance limits are provided here, together with a comprehensive glossary. Potential pitfalls are described such that they can be avoided. In order to assure an efficient and sustainable transfer of analytical procedures, a practically relevant and scientifically sound evaluation with corresponding acceptance criteria is crucial. Various strategies and statistical tools such as significance tests, absolute acceptance criteria, and equivalence tests are thoroughly descibed and compared in detail giving examples. Significance tests should be avoided. The success criterion is not statistical significance, but rather analytical relevance. Depending on a risk assessment of the analytical procedure in question, statistical equivalence tests are recommended, because they include both, a practically relevant acceptance limit and a direct control of the statistical risks. However, for lower risk procedures, a simple comparison of the transfer performance parameters to absolute limits is also regarded as sufficient. Copyright © 2013 Elsevier B.V. All rights reserved.
Calibration and evaluation of a dispersant application system
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shum, J.S.
1987-05-01
The report presents recommended methods for calibrating and operating boat-mounted dispersant application systems. Calibration of one commercially-available system and several unusual problems encountered in calibration are described. Charts and procedures for selecting pump rates and other operating parameters in order to achieve a desired dosage are provided. The calibration was performed at the EPA's Oil and Hazardous Materials Simulated Environmental Test Tank (OHMSETT) facility in Leonardo, New Jersey.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Calibrations and Verifications § 1065.308 Continuous... adjusted to account for the dilution from ambient air drawn into the probe. We recommend you use the final... gases diluted in air. You may use a multi-gas span gas, such as NO-CO-CO2-C3H8-CH4, to verify multiple...
New heterogeneous test statistics for the unbalanced fixed-effect nested design.
Guo, Jiin-Huarng; Billard, L; Luh, Wei-Ming
2011-05-01
When the underlying variances are unknown or/and unequal, using the conventional F test is problematic in the two-factor hierarchical data structure. Prompted by the approximate test statistics (Welch and Alexander-Govern methods), the authors develop four new heterogeneous test statistics to test factor A and factor B nested within A for the unbalanced fixed-effect two-stage nested design under variance heterogeneity. The actual significance levels and statistical power of the test statistics were compared in a simulation study. The results show that the proposed procedures maintain better Type I error rate control and have greater statistical power than those obtained by the conventional F test in various conditions. Therefore, the proposed test statistics are recommended in terms of robustness and easy implementation. ©2010 The British Psychological Society.
Neugebauer, E A M; Wilkinson, R C; Kehlet, H; Schug, S A
2007-07-01
Many patients still suffer severe acute pain in the postoperative period. Although guidelines for treating acute pain are widely published and promoted, most do not consider procedure-specific differences in pain experienced or in techniques that may be most effective and appropriate for different surgical settings. The procedure-specific postoperative pain management (PROSPECT) Working Group provides procedure-specific recommendations for postoperative pain management together with supporting evidence from systematic literature reviews and related procedures at http://www.postoppain.org The methodology for PROSPECT reviews was developed and refined by discussion of the Working Group, and it adapts existing methods for formulation of consensus recommendations to the specific requirements of PROSPECT. To formulate PROSPECT recommendations, we use a methodology that takes into account study quality and source and level of evidence, and we use recognized methods for achieving group consensus, thus reducing potential bias. The new methodology is first applied in full for the 2006 update of the PROSPECT review of postoperative pain management for laparoscopic cholecystectomy. Transparency in PROSPECT processes allows the users to be fully aware of any limitations of the evidence and recommendations, thereby allowing for appropriate decisions in their own practice setting.
40 CFR 255.24 - Procedure for identifying interstate regions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Procedure for identifying interstate regions. 255.24 Section 255.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID... recommendation, the local consensus, or a neighboring Governor's recommendation is that an interstate region be...
Prudent Practices for Handling Hazardous Chemicals in Laboratories.
ERIC Educational Resources Information Center
National Academy of Sciences-National Research Council, Washington, DC. Assembly of Mathematical and Physical Sciences.
This guide recommends procedures for safe handling and disposal of hazardous substances, along with broad recommendations for developing comprehensive laboratory safety programs. Although specific information is provided, general principles which can be adapted to activities in any laboratory are emphasized. Section 1 focuses on procedures for…
16 CFR § 1702.2 - Procedural requirements and recommendations.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Procedural requirements and recommendations. § 1702.2 Section § 1702.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS PETITIONS FOR EXEMPTIONS FROM POISON PREVENTION PACKAGING ACT...
Turbine Blade Temperature Measurements Using Thin Film Temperature Sensors
NASA Technical Reports Server (NTRS)
Grant, H. P.; Przybyszewski, J. S.; Claing, R. G.
1981-01-01
The development of thin film temperature sensors is discussed. The technology for sputtering 2 micron thin film platinum versus platinum 10 percent rhodium thermocouples on alumina forming coatings was improved and extended to applications on actual turbine blades. Good adherence was found to depend upon achieving a proper morphology of the alumina surface. Problems of adapting fabrication procedures to turbine blades were uncovered, and improvements were recommended. Testing at 1250 K at one atmosphere pressure was then extended to a higher Mach No. (0.5) in combustor flow for 60 hours and 71 thermal cycles. The mean time to failure was 47 hours accumulated during 1 hour exposures in the combustor. Calibration drift was about 0.1 percent per hour, attributable to oxidation of the rhodium in the thin films. An increase in film thickness and application of a protective overcoat are recommended to reduce drift in actual engine testing.
Permanent and separable aerospace tubing/ fitting evaluation program, volume 1
NASA Technical Reports Server (NTRS)
Ursell, C. R.; Franz, C. R.
1975-01-01
The tube fitting evaluation program was conducted to develop a standard overall test program including methods, procedures, and equipment as well as recommended test sequences for qualifying fitting/tubing assemblies. The program consisted of testing the MS flareless (separable) fitting and utilizing the results as baseline data from which all other fittings will be evaluated. Five separable designs and five permanent designs were tested in three sizes with two types of tubing materials. The basic design requirements were 4,000 psi operating pressure within the temperature range of minus 65 F to plus 450 F while also being compatible with 21-6-9 and titanium 3Al-2.5V tubing alloys.
USDA analyst review of the LACIE IMAGE-100 hybrid system test
NASA Technical Reports Server (NTRS)
Ashburn, P.; Buelow, K.; Hansen, H. L.; May, G. A. (Principal Investigator)
1979-01-01
Fifty operational segments from the U.S.S.R., 40 test segments from Canada, and 24 test segments from the United States were used to provide a wide range of geographic conditions for USDA analysts during a test to determine the effectiveness of labeling single pixel training fields (dots) using Procedure 1 on the 1-100 hybrid system, and clustering and classifying on the Earth Resources Interactive Processing System. The analysts had additional on-line capabilities such as interactive dot labeling, class or cluster map overlay flickers, and flashing of all dots of equal spectral value. Results on the 1-100 hybrid system are described and analyst problems and recommendations are discussed.
Hynd, David; Depinet, Paul; Lorenz, Bernd
2013-01-01
The United Nations Economic Commission for Europe Informal Group on GTR No. 7 Phase 2 are working to define a build level for the BioRID II rear impact (whiplash) crash test dummy that ensures repeatable and reproducible performance in a test procedure that has been proposed for future legislation. This includes the specification of dummy hardware, as well as the development of comprehensive certification procedures for the dummy. This study evaluated whether the dummy build level and certification procedures deliver the desired level of repeatability and reproducibility. A custom-designed laboratory seat was made using the seat base, back, and head restraint from a production car seat to ensure a representative interface with the dummy. The seat back was reinforced for use in multiple tests and the recliner mechanism was replaced by an external spring-damper mechanism. A total of 65 tests were performed with 6 BioRID IIg dummies using the draft GTR No.7 sled pulse and seating procedure. All dummies were subject to the build, maintenance, and certification procedures defined by the Informal Group. The test condition was highly repeatable, with a very repeatable pulse, a well-controlled seat back response, and minimal observed degradation of seat foams. The results showed qualitatively reasonable repeatability and reproducibility for the upper torso and head accelerations, as well as for T1 Fx and upper neck Fx . However, reproducibility was not acceptable for T1 and upper neck Fz or for T1 and upper neck My . The Informal Group has not selected injury or seat assessment criteria for use with BioRID II, so it is not known whether these channels would be used in the regulation. However, the ramping-up behavior of the dummy showed poor reproducibility, which would be expected to affect the reproducibility of dummy measurements in general. Pelvis and spine characteristics were found to significantly influence the dummy measurements for which poor reproducibility was observed. It was also observed that the primary neck response in these tests was flexion, not extension. This correlates well with recent findings from Japan and the United States showing a correlation between neck flexion and injury in accident replication simulations and postmortem human subjects (PMHS) studies, respectively. The present certification tests may not adequately control front cervical spine bumper characteristics, which are important for neck flexion response. The certification sled test also does not include the pelvis and so cannot be used to control pelvis response and does not substantially load the lumbar bumpers and so does not control these parts of the dummy. The stiffness of all spine bumpers and of the pelvis flesh should be much more tightly controlled. It is recommended that a method for certifying the front cervical bumpers should be developed. Recommendations are also made for tighter tolerance on the input parameters for the existing certification tests.
Di Berardino, F; Tognola, G; Paglialonga, A; Alpini, D; Grandori, F; Cesarani, A
2010-08-01
To assess whether different compact disk recording protocols, used to prepare speech test material, affect the reliability and comparability of speech audiometry testing. We conducted acoustic analysis of compact disks used in clinical practice, to determine whether speech material had been recorded using similar procedures. To assess the impact of different recording procedures on speech test outcomes, normal hearing subjects were tested using differently prepared compact disks, and their psychometric curves compared. Acoustic analysis revealed that speech material had been recorded using different protocols. The major difference was the gain between the levels at which the speech material and the calibration signal had been recorded. Although correct calibration of the audiometer was performed for each compact disk before testing, speech recognition thresholds and maximum intelligibility thresholds differed significantly between compact disks (p < 0.05), and were influenced by the gain between the recording level of the speech material and the calibration signal. To ensure the reliability and comparability of speech test outcomes obtained using different compact disks, it is recommended to check for possible differences in the recording gains used to prepare the compact disks, and then to compensate for any differences before testing.
The skin prick test – European standards
2013-01-01
Skin prick testing is an essential test procedure to confirm sensitization in IgE-mediated allergic disease in subjects with rhinoconjunctivitis, asthma, urticaria, anapylaxis, atopic eczema and food and drug allergy. This manuscript reviews the available evidence including Medline and Embase searches, abstracts of international allergy meetings and position papers from the world allergy literature. The recommended method of prick testing includes the appropriate use of specific allergen extracts, positive and negative controls, interpretation of the tests after 15 – 20 minutes of application, with a positive result defined as a wheal ≥3 mm diameter. A standard prick test panel for Europe for inhalants is proposed and includes hazel (Corylus avellana), alder (Alnus incana), birch (Betula alba), plane (Platanus vulgaris), cypress (Cupressus sempervirens), grass mix (Poa pratensis, Dactilis glomerata, Lolium perenne, Phleum pratense, Festuca pratensis, Helictotrichon pretense), Olive (Olea europaea), mugwort (Artemisia vulgaris), ragweed (Ambrosia artemisiifolia), Alternaria alternata (tenuis), Cladosporium herbarum, Aspergillus fumigatus, Parietaria, cat, dog, Dermatophagoides pteronyssinus, Dermatophagoides farinae, and cockroach (Blatella germanica). Standardization of the skin test procedures and standard panels for different geographic locations are encouraged worldwide to permit better comparisons for diagnostic, clinical and research purposes. PMID:23369181
Dietel, Manfred; Bubendorf, Lukas; Dingemans, Anne-Marie C; Dooms, Christophe; Elmberger, Göran; García, Rosa Calero; Kerr, Keith M; Lim, Eric; López-Ríos, Fernando; Thunnissen, Erik; Van Schil, Paul E; von Laffert, Maximilian
2016-01-01
Background There is currently no Europe-wide consensus on the appropriate preanalytical measures and workflow to optimise procedures for tissue-based molecular testing of non-small-cell lung cancer (NSCLC). To address this, a group of lung cancer experts (see list of authors) convened to discuss and propose standard operating procedures (SOPs) for NSCLC. Methods Based on earlier meetings and scientific expertise on lung cancer, a multidisciplinary group meeting was aligned. The aim was to include all relevant aspects concerning NSCLC diagnosis. After careful consideration, the following topics were selected and each was reviewed by the experts: surgical resection and sampling; biopsy procedures for analysis; preanalytical and other variables affecting quality of tissue; tissue conservation; testing procedures for epidermal growth factor receptor, anaplastic lymphoma kinase and ROS proto-oncogene 1, receptor tyrosine kinase (ROS1) in lung tissue and cytological specimens; as well as standardised reporting and quality control (QC). Finally, an optimal workflow was described. Results Suggested optimal procedures and workflows are discussed in detail. The broad consensus was that the complex workflow presented can only be executed effectively by an interdisciplinary approach using a well-trained team. Conclusions To optimise diagnosis and treatment of patients with NSCLC, it is essential to establish SOPs that are adaptable to the local situation. In addition, a continuous QC system and a local multidisciplinary tumour-type-oriented board are essential. PMID:26530085
Mickley, Manfred; Renner, Gerolf
2015-01-01
Do Current German-Language Intelligence Tests Take into Consideration the Special Needs of Children with Disabilities? A review of 23 German intelligence test manuals shows that test-authors do not exclude the use of their tests for children with disabilities. However, these special groups play a minor role in the construction, standardization, and validation of intelligence tests. There is no sufficient discussion and reflection concerning the issue which construct-irrelevant requirements may reduce the validity of the test or which individual test-adaptations are allowed or recommended. Intelligence testing of children with disabilities needs more empirical evidence on objectivity, reliability, and validity of the assessment-procedures employed. Future test construction and validation should systematically analyze construct-irrelevant variance in item format, the special needs of handicapped children, and should give hints for useful test-adaptations.
CCBD's Position Summary on Physical Restraint & Seclusion Procedures in School Settings
ERIC Educational Resources Information Center
Peterson, Reece; Albrecht, Susan; Johns, Bev
2009-01-01
This document is a summary of policy recommendations from two longer and more detailed documents available from the Council for Children with Behavioral Disorders (CCBD) regarding the use of physical restraint and seclusion procedures in schools. These recommendations include: (1) CCBD believes that physical restraint or seclusion procedures…
The report is a recommended operating procedure (ROP) prepared for use in research activities conducted by EPA's Air and Energy Engineering Research Laboratory (AEERL). he described method is applicable to the continuous measurement of total hydrocarbons (THCs), also known as tot...
RECOMMENDED OPERATING PROCEDURE NO. 51: GLASS SOURCE ASSESSMENT SAMPLING SYSTEM (GLASS SASS)
The report is a recommended operating procedure (ROP), prepared for use in research activities conducted by EPA's Air and Energy Engineering Research Laboratory (AEERL). he method described is applicable to the stack sampling of flue gas from a rotary kiln and to associated equip...
9 CFR 147.11 - Laboratory procedure recommended for the bacteriological examination of salmonella.
Code of Federal Regulations, 2014 CFR
2014-01-01
... procedure recommended for the bacteriological examination of salmonella. (a) For egg- and meat-type chickens... the bacteriological examination of salmonella. 147.11 Section 147.11 Animals and Animal Products... 25 birds, and birds from Salmonella enteritidis (SE) positive environments should be cultured in...
9 CFR 147.11 - Laboratory procedure recommended for the bacteriological examination of salmonella.
Code of Federal Regulations, 2012 CFR
2012-01-01
... procedure recommended for the bacteriological examination of salmonella. (a) For egg- and meat-type chickens... the bacteriological examination of salmonella. 147.11 Section 147.11 Animals and Animal Products... 25 birds, and birds from Salmonella enteritidis (SE) positive environments should be cultured in...
9 CFR 147.11 - Laboratory procedure recommended for the bacteriological examination of salmonella.
Code of Federal Regulations, 2011 CFR
2011-01-01
... procedure recommended for the bacteriological examination of salmonella. (a) For egg- and meat-type chickens... the bacteriological examination of salmonella. 147.11 Section 147.11 Animals and Animal Products... 25 birds, and birds from Salmonella enteritidis (SE) positive environments should be cultured in...
9 CFR 147.11 - Laboratory procedure recommended for the bacteriological examination of salmonella.
Code of Federal Regulations, 2013 CFR
2013-01-01
... procedure recommended for the bacteriological examination of salmonella. (a) For egg- and meat-type chickens... the bacteriological examination of salmonella. 147.11 Section 147.11 Animals and Animal Products... 25 birds, and birds from Salmonella enteritidis (SE) positive environments should be cultured in...
9 CFR 147.11 - Laboratory procedure recommended for the bacteriological examination of salmonella.
Code of Federal Regulations, 2010 CFR
2010-01-01
... procedure recommended for the bacteriological examination of salmonella. (a) For egg- and meat-type chickens... the bacteriological examination of salmonella. 147.11 Section 147.11 Animals and Animal Products... 25 birds, and birds from Salmonella enteritidis (SE) positive environments should be cultured in...
ERIC Educational Resources Information Center
Rhode Island State Dept. of Education, Providence.
This guide is designed to provide Rhode Island educators and families with information about appropriate interventions, recommended referral procedures, recommended diagnostic procedures, and legal issues regarding students with attention deficit disorders. It begins by answering frequently asked questions about attentional disorders and…
NASA Astrophysics Data System (ADS)
Halkyard, Shannon
Chemistry is a difficult subject to learn and teach for students in general. Additionally, female students are under-represented in chemistry and the physical sciences. Within chemistry, atomic and electronic structure is a key concept and several recommendations in the literature describe how this topic can be taught better. These recommendations can be employed in multimedia instructional materials designed following principles understood through the Cognitive Theory of Multimedia Learning. Additionally, these materials can expand the known use of principles like personalization (addressing the learner as "you") and test prospective design principles like personification (referring to abstract objects like atoms as "she" or "he"). The purpose of this study was to use the recommendations on teaching atomic and electronic structure along with known multimedia design principles to create multimedia chemistry learning materials that can be used to test the use of personalization and personification both separately and together. The study also investigated how learning with these materials might be different for male and female students. A sample of 329 students from private northern California high schools were given an atomic structure pre-test, watched a multimedia chemistry instructional video, and took a post-test on atomic structure. Students were randomly assigned to watch one of six versions of the instructional video. Students in the six groups were compared using ANOVA procedures and no significant differences were found. Males were compared to females for the six different treatment conditions and the most significant difference was for the treatment that combined personalization (you) and female personification (she), with a medium effect size (Cohen's d=0.65). Males and females were then compared separately across the six groups using ANOVA procedures and t-tests. A significant difference was found for female students using the treatment that combined personalization (you) and female personification (she) compared to the group with no personalization or personification, with a medium-large effect size (Cohen's d=0.75). Further research is needed to eliminate possible confounding and other factors, but the study results indicate that personalization and personification likely have positive effects on learning, especially for female students.
Industry tests of NASA ceramic thermal barrier coating. [for gas turbine engine applications
NASA Technical Reports Server (NTRS)
Liebert, C. H.; Stepka, F. S.
1979-01-01
Ceramic thermal barrier coating (TBC) system was tested by industrial and governmental organizations for a variety of aeronautical, marine, and ground-based gas turbine engine applications. This TBC is a two-layer system with a bond coating of nickel-chromium-aluminum-yttrium (Ni-16Cr-6Al-0.6Y, in wt. percent) and a ceramic coating of yttria-stabilized zirconia (ZrO2-12Y2O3, in wt. percent). Seven tests evaluated the system's thermal protection and durability. Five other tests determined thermal conductivity, vibratory fatigue characteristics, and corrosion resistance of the system. The information presented includes test results and photographs of the coated parts. Recommendations are made for improving the coating procedures.
Provider Adherence to Syphilis Testing Recommendations for Women Delivering a Stillbirth.
Patel, Chirag G; Huppert, Jill S; Tao, Guoyu
2017-11-01
To assess overall adherence to Centers for Disease Control and Prevention and American College of Obstetrics and Gynecology recommended guidelines for syphilis testing among women who delivered a stillbirth and compare it with other tests recommended for stillbirth evaluation. We used MarketScan claims data with 40 million commercially insured and 8 million Medicaid enrollees annually to estimate prenatal care and follow-up testing among women who had stillbirths between January 1, 2013, and December 24, 2013. Stillbirth was identified if women had any International Classification of Disease, Ninth Revision codes related to a stillbirth outcome. Among women with stillbirths, we estimated the proportions of women who received prenatal care and prenatal syphilis testing within 280 days before stillbirth, and testing at the time of stillbirth (syphilis testing, complete blood count, placental examination and autopsy) using Physician's Current Procedural Terminology codes. We identified 3672 Medicaid-insured women and 6023 commercially insured women with stillbirths in 2013. Approximately, 61.7% of Medicaid-insured women and 66.0% of commercially insured women had claims data indicating prenatal syphilis testing. At the time of stillbirth, Medicaid-insured and commercially insured women had similar rates of syphilis testing (6.5% vs 9.3%), placental examination (61.6% vs 57.8%), and complete blood count (31.9% vs 37.6%). Autopsies were too infrequent to be reported. Approximately, 34.6% of Medicaid-insured women and 29.7% of commercially insured women had no syphilis testing either prenatally or at the time of stillbirth. Syphilis testing among women after stillbirth was less than 10%, illustrating limited adherence to Centers for Disease Control and Prevention and American College of Obstetrics and Gynecology recommendations. Such low prenatal and delivery syphilis testing rates may impact the number of stillbirth cases identified as congenital syphilis cases and reported to the national surveillance system. Our results emphasize the need to improve syphilis testing to improve diagnosis of syphilitic stillbirths, identify women with syphilis infection, and provide treatment to these women to avoid syphilis-related adverse outcomes.
48 CFR 32.409-2 - Recommendation for disapproval.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Recommendation for... Recommendation for disapproval. If recommending disapproval, the contracting officer shall, under agency procedures, transmit— (a) The items prescribed in 32.409-1(a), (b), and (c); and (b) The recommendation for...
Narouze, Samer N; Provenzano, David; Peng, Philip; Eichenberger, Urs; Lee, Sang Chul; Nicholls, Barry; Moriggl, Bernhard
2012-01-01
The use of ultrasound in pain medicine for interventional axial, nonaxial, and musculoskeletal pain procedures is rapidly evolving and growing. Because of the lack of specialty-specific guidelines for ultrasonography in pain medicine, an international collaborative effort consisting of members of the Special Interest Group on Ultrasonography in Pain Medicine from the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, and the Asian Australasian Federation of Pain Societies developed the following recommendations for education and training in ultrasound-guided interventional pain procedures. The purpose of these recommendations is to define the required skills for performing ultrasound-guided pain procedures, the processes for appropriate education, and training and quality improvement. Training algorithms are outlined for practice- and fellowship-based pathways. The previously published American Society of Regional Anesthesia and Pain Medicine and European Society of Regional Anaesthesia and Pain Therapy education and teaching recommendations for ultrasound-guided regional anesthesia served as a foundation for the pain medicine recommendations. Although the decision to grant ultrasound privileges occurs at the institutional level, the committee recommends that the training guidelines outlined in this document serve as the foundation for educational training and the advancement of the practice of ultrasonography in pain medicine.
Image-guided intervention in the coagulopathic patient.
Kohli, Marc; Mayo-Smith, William; Zagoria, Ronald; Sandrasegaran, Kumar
2016-04-01
Determining practice parameters for interventional procedures is challenging due to many factors including unreliable laboratory tests to measure bleeding risk, variable usage of standardized terminology for adverse events, poorly defined standards for administration of blood products, and the growing numbers of anticoagulant and antiplatelet medications. We aim to address these and other issues faced by radiologists performing invasive procedures through a review of available literature, and experiential guidance from three academic medical centers. We discuss the significant limitations with respect to using prothrombin-time and international normalized ratio to measure bleeding risk, especially in patients with synthetic defects due to liver function. Factors affecting platelet function including the impact of uremia; recent advances in laboratory testing, including platelet function testing; and thromboelastography are also discussed. A review of the existing literature of fresh-frozen plasma replacement therapy is included. The literature regarding comorbidities affecting coagulation including malignancy, liver failure, and uremia are also reviewed. Finally, the authors present a set of recommendations for laboratory thresholds, corrective transfusions, as well as withholding and restarting medications.
Assessment of driving after stroke--a pluridisciplinary task.
Ponsford, A-S; Viitanen, M; Lundberg, C; Johansson, K
2008-03-01
The aim of the study was to analyze the assessment procedure and identify predictors for the team decision when assessing fitness to drive a car after stroke. The material used was a retrospective data set with 200 stroke clients from Queen Elisabeth's Foundation Mobility Centre at Banstead UK. Fifty-four percent of clients were considered fit to continue driving where 9% could resume driving after car adaptation and training. Important factors for the outcome were vision (acuity and field), neuropsychological functions (divided attention), and track and/or on road test (reaction time, anticipation, speed, and positioning). Cognitive impairment was the main problem in those who failed the driving test and judged not fit for continued driving. Car adaptation, mainly comprising infrared transmitted secondary controls together with automatic transmission was recommended in 35% of the cases. The contribution of different specialist groups appears to be necessary for an effective evaluation, but the assessment procedure can be done more cost-effectively by dividing it into two separate parts and removing certain subtests. The in-car track test is an important part of the assessment procedure with a high face validity and could in many cases make it unnecessary to perform in-traffic tests with unsafe drivers. Car adaptation is often necessary for a client with pronounced hemi-paresis and a full road test can for those only be performed after training the use of car controls.
European guidelines for workplace drug and alcohol testing in hair.
Salomone, A; Tsanaclis, L; Agius, R; Kintz, P; Baumgartner, M R
2016-10-01
Guidelines for Legally Defensible Workplace Drug Testing have been prepared and updated by the European Workplace Drug Testing Society (EWDTS). They are based on the 2010 version published by Pascal Kintz and Ronald Agius (Guidelines for European workplace drug and alcohol testing in hair. Drug Test. Anal. 2010, 2, 367) and in concordance with the Society of Hair Testing guidelines (Society of Hair Testing guidelines for drug testing in hair. Forensic Sci. Int. 2012, 218, 20-24). The European Guidelines are designed to establish best practice procedures whilst allowing individual countries to operate within the requirements of national customs and legislation. The EWDTS recommends that all European laboratories that undertake legally defensible workplace drug testing use these guidelines as a template for accreditation. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.
2014-01-01
Background Failures to follow recommendations for reprocessing of surgical instruments may place patients at risk for exposure to pathogenic microorganisms. When such failures occur, medical facilities often face considerable uncertainty and challenges in assessing the actual risks of disease transmission. Methods In 2011, staff at an Ohio hospital determined that surgical instruments inside a Steriset Container had inadvertently been autoclaved on a gravity cycle rather than on the recommended pre-vacuum cycle, potentially exposing 72 patients who underwent surgery with the instruments to risk of infection. To provide an assessment of the level of risk, we tested the effectiveness of the machine washer/disinfector step and of the sterilization process inside the Steriset Container on the gravity cycle for killing of Geobacillus stearothermophilus spores, Clostridium difficile spores, and methicillin-resistant Staphylococcus aureus (MRSA). Based on the test results, the risk of transmission of MRSA by the instruments was calculated and the risk of transmission of hepatitis B virus was estimated. Results The machine washer/disinfector consistently reduced MRSA recovery by a factor of 1:100,000. The sterilization process inside the Steriset Container consistently reduced MRSA concentrations by a factor of >1:10,000,000 and killed 105C. difficile spores and 105G. stearothermophilus spores. The risk of MRSA transmission due to the incident was calculated to be 1 in 100 trillion. Conclusions The risk for transmission of infection due to the failure to follow recommended sterilization processes was negligible based upon complete killing of G. stearothermophilus biological indicator spores, C. difficile spores, and MRSA under conditions that replicated the incident where proper procedures were not followed. Such real-time assessments of the risks associated with specific incidents may provide evidence-based information that can be used to inform decisions regarding disclosure of the incident to patients. PMID:24447336
Donskey, Curtis J; Yowler, Marian; Falck-Ytter, Yngve; Kundrapu, Sirisha; Salata, Robert A; Rutala, William A
2014-01-21
Failures to follow recommendations for reprocessing of surgical instruments may place patients at risk for exposure to pathogenic microorganisms. When such failures occur, medical facilities often face considerable uncertainty and challenges in assessing the actual risks of disease transmission. In 2011, staff at an Ohio hospital determined that surgical instruments inside a Steriset Container had inadvertently been autoclaved on a gravity cycle rather than on the recommended pre-vacuum cycle, potentially exposing 72 patients who underwent surgery with the instruments to risk of infection. To provide an assessment of the level of risk, we tested the effectiveness of the machine washer/disinfector step and of the sterilization process inside the Steriset Container on the gravity cycle for killing of Geobacillus stearothermophilus spores, Clostridium difficile spores, and methicillin-resistant Staphylococcus aureus (MRSA). Based on the test results, the risk of transmission of MRSA by the instruments was calculated and the risk of transmission of hepatitis B virus was estimated. The machine washer/disinfector consistently reduced MRSA recovery by a factor of 1:100,000. The sterilization process inside the Steriset Container consistently reduced MRSA concentrations by a factor of >1:10,000,000 and killed 105C. difficile spores and 105G. stearothermophilus spores. The risk of MRSA transmission due to the incident was calculated to be 1 in 100 trillion. The risk for transmission of infection due to the failure to follow recommended sterilization processes was negligible based upon complete killing of G. stearothermophilus biological indicator spores, C. difficile spores, and MRSA under conditions that replicated the incident where proper procedures were not followed. Such real-time assessments of the risks associated with specific incidents may provide evidence-based information that can be used to inform decisions regarding disclosure of the incident to patients.
Zargar, Homayoun; van den Bergh, Roderick; Moon, Daniel; Lawrentschuk, Nathan; Costello, Anthony; Murphy, Declan
2017-01-01
To assess the impact of the United States Preventive Services Task Force (USPTSTF) recommendations on prostate-specific antigen (PSA) testing, prostate biopsy, and prostatectomy in Australian men based on the available Medicare data. Events were identified using Medicare item numbers for PSA testing (66655, 66659), prostate biopsy (37219), prostatectomy (37210), and prostatectomy with lymph node dissection (37211). The occurrences of each procedure was queried per 100 000 capita for consecutive financial years over the period 2000-2015. For each item number, reports were also generated for all Australian States. For PSA testing the data was stratified into three age groups of 45-54, 55-64, and 65-74 years. For assessing the rate of prostatectomy the capita rate values for two item numbers of prostatectomy (37210) and prostatectomy with lymph node dissection (37211) were combined. Steady declines in per capita incidences of all five item numbers assessed were seen for the three consecutive financial years (2013-2015) since the publication of the USPTSTF recommendation statement. These declines were seen across all Australian States. When examining the rate of PSA testing for the three age brackets 45-54, 55-64, and 65-74 years, similar trends were identified. Since the introduction of the USPTSTF recommendation statement there has been a steady nationwide decline in per capita incidences of PSA testing, prostate biopsy, and prostatectomy based on the Australian Medicare data. Whether these declines are in the right direction toward reduction in over-diagnosis and overtreatment of clinically insignificant prostate cancer or stage migration toward more locally advanced disease due to lost opportunity in diagnosing and treating early clinically significant prostate cancer will remain to be seen. © 2016 The Authors BJU International © 2016 BJU International Published by John Wiley & Sons Ltd.
Lung Reference Set C Application: Rachel Ostroff - SomaLogics (2010) — EDRN Public Portal
Analysis of the EDRN lung biomarker samples will enable the next step in development of a clinical diagnostic assay for the differential diagnosis of lung cancer or benign disease in patients with indeterminant pulmonary nodules. The objective is to develop a blood test with sufficient accuracy to identify lung cancer in these patients, which will aid the treating physician in decisions to recommend invasive procedures or watchful waiting.
Larson, Paul S; Willie, Jon T; Vadivelu, Sudhakar; Azmi-Ghadimi, Hooman; Nichols, Amy; Fauerbach, Loretta Litz; Johnson, Helen Boehm; Graham, Denise
2017-07-01
The development of navigation technology facilitating MRI-guided stereotactic neurosurgery has enabled neurosurgeons to perform a variety of procedures ranging from deep brain stimulation to laser ablation entirely within an intraoperative or diagnostic MRI suite while having real-time visualization of brain anatomy. Prior to this technology, some of these procedures required multisite workflow patterns that presented significant risk to the patient during transport. For those facilities with access to this technology, safe practice guidelines exist only for procedures performed within an intraoperative MRI. There are currently no safe practice guidelines or parameters available for facilities looking to integrate this technology into practice in conventional MRI suites. Performing neurosurgical procedures in a diagnostic MRI suite does require precautionary measures. The relative novelty of technology and workflows for direct MRI-guided procedures requires consideration of safe practice recommendations, including those pertaining to infection control and magnet safety issues. This article proposes a framework of safe practice recommendations designed for assessing readiness and optimization of MRI-guided neurosurgical interventions in the diagnostic MRI suite in an effort to mitigate patient risk. The framework is based on existing clinical evidence, recommendations, and guidelines related to infection control and prevention, health care-associated infections, and magnet safety, as well as the clinical and practical experience of neurosurgeons utilizing this technology. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.
Russell, R. C.; Paton, R.
1989-01-01
Aircraft disinsection with aerosol insecticides during flight has generally been held to be inadvisable because it was assumed that the insecticides would be rapidly removed by the cabin air-conditioning system. We have developed protocols to deliver 2% d-phenothrin at a dose of 35 g per 100 m3 in various aircraft, and trials undertaken on Boeing 747 and 767 aircraft showed that their air-conditioning systems do not preclude effective disinsection. Mortality levels of 100% for Culex quinquefasciatus and Musca domestica test insects were recorded under normal operating conditions during routine scheduled passenger flights with disinsection procedures undertaken at "blocks-away" or at "top-of-descent". As a result, "top-of-descent" disinsection has been introduced as the recommended procedure for aircraft landing in Australia. PMID:2611975
Russell, R C; Paton, R
1989-01-01
Aircraft disinsection with aerosol insecticides during flight has generally been held to be inadvisable because it was assumed that the insecticides would be rapidly removed by the cabin air-conditioning system. We have developed protocols to deliver 2% d-phenothrin at a dose of 35 g per 100 m3 in various aircraft, and trials undertaken on Boeing 747 and 767 aircraft showed that their air-conditioning systems do not preclude effective disinsection. Mortality levels of 100% for Culex quinquefasciatus and Musca domestica test insects were recorded under normal operating conditions during routine scheduled passenger flights with disinsection procedures undertaken at "blocks-away" or at "top-of-descent". As a result, "top-of-descent" disinsection has been introduced as the recommended procedure for aircraft landing in Australia.
M-52 spray booth qualification test
NASA Technical Reports Server (NTRS)
1990-01-01
The procedures, performance, and results obtained from the M-52 spray booth qualification test are documented. The test was conducted at Thiokol Corporation, Space Operations, M-52 Inert Parts Preparation facility. The purpose of this testing sequence was to ensure the spray booth would produce flight qualified hardware. The testing sequence was conducted in two series. The first series was conducted under CTP-0142, Revision 1. The second series was conducted in accordance with CTP-0142, Revision 2. The test sequence started with CTP-0142, Revision 1. The series consisted of the contamination removal test and the performance test. The contamination removal test was used to assess the Teflon level in the spray booth. The performance test consisted of painting and Chemloking a forward dome inside the spray booth per flight procedures. During the performance test, two sets of witness panels (case/insulation and steel/epoxy/steel) were prepared and pull tested. The CTP-0142, Revision 2, series of testing consisted of re-testing the steel/epoxy/steel witness panels. The pull tests analysis indicates the results of the tensile tests were comparable to the systems tunnel witness panel database. The exposed panel set and the control panel set average tensile values were above the 1-basis lower limits established on the systems tunnel witness panel database. It is recommended that the M-52 spray booth be qualified for producing flight hardware.
An evaluation of periodontal assessment procedures among Indiana dental hygienists.
Stephan, Christine A
2014-01-01
Using a descriptive correlational design, this study surveyed periodontal assessment procedures currently performed by Indiana dental hygienists in general dentistry practices to reveal if deficiencies in assessment exist. Members (n = 354) of the Indiana Dental Hygienists' Association (IDHA) were invited to participate in the survey. A 22 multiple choice question survey, using Likert scales for responses, was open to participants for three weeks. Descriptive and non-parametric inferential statistics analyzed questions related to demographics and assessment procedures practiced. In addition, an evaluation of the awareness of periodontal assessment procedures recommended by the American Academy of Periodontology (AAP) was examined. Of the 354 Indiana dental hygienists surveyed, a 31.9% response rate was achieved. Participants were asked to identify the recommended AAP periodontal assessment procedures they perform. The majority of respondents indicated either frequently or always performing the listed assessment procedures. Additionally, significant relationships were found between demographic factors and participants' awareness and performance of recommended AAP assessment procedures. While information gathered from this study is valuable to the body of literature regarding periodontal disease assessment, continued research with larger survey studies should be conducted to obtain a more accurate national representation of what is being practiced by dental hygienists.
Code of Federal Regulations, 2013 CFR
2013-01-01
... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...
Code of Federal Regulations, 2011 CFR
2011-01-01
... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...
Code of Federal Regulations, 2012 CFR
2012-01-01
... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...
Code of Federal Regulations, 2010 CFR
2010-01-01
... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...
Code of Federal Regulations, 2014 CFR
2014-01-01
... the bacteriological examination of cull chicks and poults for salmonella. 147.17 Section 147.17... poults for salmonella. The laboratory procedure described in this section is recommended for the bacteriological examination of cull chicks from egg-type and meat-type chicken flocks and waterfowl, exhibition...
Ethical and Professional Guidelines for Use of Crisis Procedures
ERIC Educational Resources Information Center
Simonsen, Brandi; Sugai, George; Freeman, Jennifer; Kern, Laura; Hampton, Jane
2014-01-01
The use of crisis procedures, such as seclusion and physical restraint, in U.S. schools has garnered a great deal of national attention, resulting in reports from professional organizations, proposed legislation, and recent recommendations from the U.S. Department of Education (U.S. DOE; 2012). In this paper, we review the recommendations from the…
Spornraft-Ragaller, Petra; Kämmerer, Eva; Gillitzer, Claus; Schmitt, Jochen
2012-04-01
Semipermanent henna tattoos containing para-phenylenediamine (PPD) are a well-known cause of severe contact dermatitis, mainly in children. Another relevant exposure source to PPD are hair dyes, which are increasingly used by children and have also been reported to cause intense facial and scalp dermatitis. German patch test guidelines for children recommend that PPD should only be tested in patients who have had a henna tattoo, and then at a reduced concentration of PPD 0.5 % for 24 hours. We report on patch test results in four patients, three children and one adolescent, with a history of contact dermatitis to henna tattoos or hair dye. We used the recommended or even lower patch test concentrations of PPD with 24-hours exposure in all patients. All patients showed very strong patch test reactions to PPD and cross-reactions to related compounds even after dilution of PPD to as low as 0.05 %. Therefore, we suggest that in children with a history of allergic reactions to this compound, a titration test should be performed beginning at a concentration of maximal 0.05 %. This procedure has also been proposed previously based on a larger cases series in adults. © The Authors • Journal compilation © Blackwell Verlag GmbH, Berlin.
Online Calibration of Polytomous Items Under the Generalized Partial Credit Model
Zheng, Yi
2016-01-01
Online calibration is a technology-enhanced architecture for item calibration in computerized adaptive tests (CATs). Many CATs are administered continuously over a long term and rely on large item banks. To ensure test validity, these item banks need to be frequently replenished with new items, and these new items need to be pretested before being used operationally. Online calibration dynamically embeds pretest items in operational tests and calibrates their parameters as response data are gradually obtained through the continuous test administration. This study extends existing formulas, procedures, and algorithms for dichotomous item response theory models to the generalized partial credit model, a popular model for items scored in more than two categories. A simulation study was conducted to investigate the developed algorithms and procedures under a variety of conditions, including two estimation algorithms, three pretest item selection methods, three seeding locations, two numbers of score categories, and three calibration sample sizes. Results demonstrated acceptable estimation accuracy of the two estimation algorithms in some of the simulated conditions. A variety of findings were also revealed for the interacted effects of included factors, and recommendations were made respectively. PMID:29881063
Hypersensitivity lo local anesthetics.
Grzanka, Alicja; Wasilewska, Iwona; Śliwczyńska, Magdalena; Misiołek, Hanna
2016-01-01
Using local anaesthetics in daily practice, particularly by anaesthetists and dentists, is connected with the risk of side effects. Therefore, the observation of side effects, carrying out detailed research (according to the chart proposed in this study) and conducting specialist examinations is of the highest importance. There is a variety of side effects that could occur during local anaesthesia procedures, with the intensity ranging from clinically unimportant to life threatening. Clinicians' major concerns are the appearance of various hypersensitivity reactions, including anaphylaxis. Healthcare providers responsible for the administration of local anaesthetics should be able to detect hypersensitivity reactions to implement appropriate treatment and then choose highly selected diagnostic procedures. The final diagnosis should be based on specific medical history; documentation, including a description of the case and measurement of tryptase activity; skin tests; and provocation trials. Screening tests are not recommended in populations without hypersensitivity to local anaesthestics in their medical history.
Cleveland, Jennifer L; Cardo, Denise M
2003-10-01
Current data indicate that the risk for transmitting bloodborne pathogens in dental health care settings is low. Pre-exposure hepatitis B vaccination and the use of standard precautions to prevent exposure to blood are the most effective strategies for preventing DHCP from occupational infection with HIV, HBV or HCV. Each dental health care facility should develop a comprehensive written program for preventing and managing occupational exposures to blood that: (1) describes the types of blood exposures that may place DHCP at risk for infection; (2) outlines procedures for promptly reporting and evaluating such exposures; and (3) identifies a health care professional who is qualified to provide counseling and perform all medical evaluations and procedures in accordance with the most current USPHS recommendations. Finally, resources should be available that permit rapid access to clinical care, testing, counseling, and PEP for exposed DHCP and the testing and counseling of source patients.
NASA Technical Reports Server (NTRS)
McGhee, R. Wayne
1998-01-01
A self-shielded superconducting magnet was designed for the NASA Goddard Space Flight Center Adiabatic Demagnetization Refrigerator Program. This is the third magnet built from this design. The magnets utilize Cryomagnetics' patented ultra-low current technology. The magnetic system is capable of reaching a central field of two tesla at slightly under two amperes and has a total inductance of 1068 henries. This final report details the requirements of the magnet, the specifications of the resulting magnet, the test procedures and test result data for the third magnet (Serial # C-654-M), and recommended precautions for use of the magnet.
The detection and correction of outlying determinations that may occur during geochemical analysis
Harvey, P.K.
1974-01-01
'Wild', 'rogue' or outlying determinations occur periodically during geochemical analysis. Existing tests in the literature for the detection of such determinations within a set of replicate measurements are often misleading. This account describes the chances of detecting outliers and the extent to which correction may be made for their presence in sample sizes of three to seven replicate measurements. A systematic procedure for monitoring data for outliers is outlined. The problem of outliers becomes more important as instrumental methods of analysis become faster and more highly automated; a state in which it becomes increasingly difficult for the analyst to examine every determination. The recommended procedure is easily adapted to such analytical systems. ?? 1974.
NASA Technical Reports Server (NTRS)
Edelstein, F.
1974-01-01
Heat pipe manufacturing methods are examined with the goal of establishing cost effective procedures that will ultimately result in cheaper more reliable heat pipes. Those methods which are commonly used by all heat pipe manufacturers have been considered, including: (1) envelope and wick cleaning, (2) end closure and welding, (3) mechanical verification, (4) evacuation and charging, (5) working fluid purity, and (6) charge tube pinch off. The study is limited to moderate temperature aluminum and stainless steel heat pipes with ammonia, Freon-21 and methanol working fluids. Review and evaluation of available manufacturers techniques and procedures together with the results of specific manufacturing oriented tests have yielded a set of recommended cost-effective specifications which can be used by all manufacturers.
Holzhütter, H G; Genschow, E; Diener, W; Schlede, E
2003-05-01
The acute toxic class (ATC) methods were developed for determining LD(50)/LC(50) estimates of chemical substances with significantly fewer animals than needed when applying conventional LD(50)/LC(50) tests. The ATC methods are sequential stepwise procedures with fixed starting doses/concentrations and a maximum of six animals used per dose/concentration. The numbers of dead/moribund animals determine whether further testing is necessary or whether the test is terminated. In recent years we have developed classification procedures for the oral, dermal and inhalation routes of administration by using biometric methods. The biometric approach assumes a probit model for the mortality probability of a single animal and assigns the chemical to that toxicity class for which the best concordance is achieved between the statistically expected and the observed numbers of dead/moribund animals at the various steps of the test procedure. In previous publications we have demonstrated the validity of the biometric ATC methods on the basis of data obtained for the oral ATC method in two-animal ring studies with 15 participants from six countries. Although the test procedures and biometric evaluations for the dermal and inhalation ATC methods have already been published, there was a need for an adaptation of the classification schemes to the starting doses/concentrations of the Globally Harmonized Classification System (GHS) recently adopted by the Organization for Economic Co-operation and Development (OECD). Here we present the biometric evaluation of the dermal and inhalation ATC methods for the starting doses/concentrations of the GHS and of some other international classification systems still in use. We have developed new test procedures and decision rules for the dermal and inhalation ATC methods, which require significantly fewer animals to provide predictions of toxicity classes, that are equally good or even better than those achieved by using the conventional LD(50)/LC(50) methods. In order to cope with rather narrow dose/concentration classes of the GHS we have, as in our previous publications, combined the outcome of all results that can be obtained during testing for the allocation to one of the defined toxicity classes of the GHS. Our results strongly recommend the deletion of the dermal LD(50) and the inhalation LC(50) test as regulatory tests and the adoption of the dermal and inhalation ATC methods as internationally accepted alternatives.
[Prevention of infectious endocarditis].
Etienne, J
1994-01-01
An antibiotic prophylaxis of infective endocarditis is recommended in patients at high risk for infective endocarditis (patients with valvular prosthesis, or cyanogen congenital or obstructive cardiac defect) or those with aortic, mitral or tricuspid valvulopathy, a non-cyanogen congenital or obstructive cardiac defect. Dental procedures (except treatment for superficial decay and preparation for the fitting of prostheses to teeth with intact pulp) are to be carried out under local antisepsis and a prophylactic antibiotics, such as 3 g of oral amoxicillin or in case of allergy to penicillin, 600 mg of clindamycin or 1g of pristinamycin, administered one hour prior to the procedure. A similar prophylaxis is recommended for the procedures on the upper respiratory tract. Amoxicillin, or vancomycin or teicoplanin are recommended for procedures under general anaesthesia. For surgery on the intestinal or urogenital tract, regimens combine amoxicillin with gentamicin, or in case of allergy to penicillin, vancomycin or teicoplanin with gentamicin.
Experiences with the in vivo and in vitro comet assay in regulatory testing.
Frötschl, Roland
2015-01-01
The in vivo comet assay has recently been implemented into regulatory genotoxicity testing of pharmaceuticals with inclusion into the ICH S2R1 guidance. Regulatory genotoxicity testing aims to detect DNA alterations in form of gene mutations, larger scale chromosomal damage and recombination and aneuploidy. The ICH S2R1 guideline offers two options of standard batteries of tests for the detection of these endpoints. Both options start with an AMES assay and option 1 includes an in vitro mammalian cell assay and an in vivo micronucleus assay in rodent, whereas option 2 includes an in vivo micronucleus assay in bone marrow in rodent and a second in vivo assay in a second tissue with a second endpoint. The test recommended as second in vivo test is the comet assay in rat liver. The in vivo comet assay is considered as mature enough to ensure reliable detection of relevant in vivo genotoxicants in combination with the micronucleus test in bone marrow and the AMES assay. Although lots of research papers have been published using the in vitro comet assay, the in vitro version has not been implemented into official regulatory testing guidelines. A survey of the years 1999-2014 revealed 27 in vivo comet assays submitted to BfArM with market authorisation procedures, European and national advice procedures and clinical trial applications. In three procedures, in vitro comet assays had been submitted within the genetic toxicology packages. © The Author 2014. Published by Oxford University Press on behalf of the Mutagenesis Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.
16 CFR 1.43 - Recommendations.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Recommendations. 1.43 Section 1.43... PROCEDURES Export Trade Associations § 1.43 Recommendations. Whenever the Commission has reason to believe... association recommendations for the readjustment of its business. If the association fails to comply with the...
16 CFR 1.43 - Recommendations.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Recommendations. 1.43 Section 1.43... PROCEDURES Export Trade Associations § 1.43 Recommendations. Whenever the Commission has reason to believe... association recommendations for the readjustment of its business. If the association fails to comply with the...
Suchomel, M; Kundi, M; Allegranzi, B; Pittet, D; Rotter, M L
2011-10-01
The 2009 World Health Organization (WHO) Guidelines on hand hygiene in health care recommend alcohol-based hand rubs for both hygienic and pre-surgical hand treatment. Two formulations based on ethanol 80% v/v and 2-propanol 75% v/v are proposed for local preparation in healthcare settings where commercial products are not available or too expensive. Both formulations and our suggested modifications (using mass rather than volume percent concentrations) were evaluated for their conformity with the efficacy requirements of the forthcoming amendment of the European Norm (EN) 12791, i.e. non-inferiority of a product when compared with a reference procedure (1-propanol 60% v/v for 3 min) immediately and 3 h after antisepsis. In this study, the WHO-recommended formulations were tested for 3 min and 5 min. Neither formulation met the efficacy requirements of EN 12791 with 3 min application. Increasing the respective concentrations to 80 w/w (85% v/v) and 75 w/w (80% v/v), together with a prolonged application of 5 min, rendered the immediate effect of both formulations non-inferior to the reference antisepsis procedure. This was not the case with the 3h effect, which remained significantly inferior to the reference. Although the original formulations do not meet the efficacy requirements of EN 12791, the clinical significance of this finding deserves further clinical trials. To comply with the requirement of EN 12791, an amendment to the formulations is possible by increasing the alcohol concentrations through changing volume into mass percent and prolonging the duration of application from 3 min to 5 min. Copyright © 2011 World Health Organization. Published by Elsevier Ltd on behalf of the Healthcare Infection Society. Published by Elsevier Ltd.. All rights reserved.
NASA Technical Reports Server (NTRS)
Szatkowski, George N.; Dudley, Kenneth L.; Koppen, Sandra V.; Ely, Jay J.; Nguyen, Truong X.; Ticatch, Larry A.; Mielnik, John J.; Mcneill, Patrick A.
2013-01-01
To support FAA certification airworthiness standards, composite substrates are subjected to lightning direct-effect electrical waveforms to determine performance characteristics of the lightning strike protection (LSP) conductive layers used to protect composite substrates. Test results collected from independent LSP studies are often incomparable due to variability in test procedures & applied practices at different organizations, which impairs performance correlations between different LSP data sets. Under a NASA supported contract, The Boeing Company developed technical procedures and documentation as guidance in order to facilitate a test method for conducting universal common practice lightning strike protection test procedures. The procedures obtain conformity in future lightning strike protection evaluations to allow meaningful performance correlations across data sets. This universal common practice guidance provides the manufacturing specifications to fabricate carbon fiber reinforced plastic (CFRP) test panels, including finish, grounding configuration, and acceptable methods for pretest nondestructive inspection (NDI) and posttest destructive inspection. The test operations guidance elaborates on the provisions contained in SAE ARP5416 to address inconsistencies in the generation of damage protection performance data, so as to provide for maximum achievable correlation across capable lab facilities. In addition, the guidance details a direct effects test bed design to aid in quantification of the multi-physical phenomena surrounding a lightning direct attachment supporting validation data requirements for the development of predictive computational modeling. The lightning test bed is designed to accommodate a repeatable installation procedure to secure the test panel and eliminate test installation uncertainty. It also facilitates a means to capture the electrical waveform parameters in 2 dimensions, along with the mechanical displacement and thermal heating parameters which occur during lightning attachment. Following guidance defined in the universal common practice LSP test documents, protected and unprotected CFRP panels were evaluated at 20, 40 and 100KAmps. This report presents analyzed data demonstrating the scientific usefulness of the common practice approach. Descriptions of the common practice CFRP test articles, LSP test bed fixture, and monitoring techniques to capture the electrical, mechanical and thermal parameters during lightning attachment are presented here. Two methods of measuring the electrical currents were evaluated, inductive current probes and a newly developed fiberoptic sensor. Two mechanical displacement methods were also examined, optical laser measurement sensors and a digital imaging correlation camera system. Recommendations are provided to help users implement the common practice test approach and obtain LSP test characterizations comparable across data sets.
Mysore, Venkataram; Mahadevappa, Omprakash H.; Barua, Shyamanta; Majid, Imran; Viswanath, Vishalakshi; Bhat, Ramesh M.; Talwar, Suresh; Thurakkal, Salim; Aurangabadkar, Sanjeev J.; Chatterjee, Manas; Ganjoo, Anil
2017-01-01
Background: Currently, the standard protocol regarding the performance of procedures on patients receiving or having recently received isotretinoin (13-cis-retinoic acid) states that the procedures should not be performed. The recommendations in standard books and drug insert require discontinuation of isotretinoin for 6 months before performing cosmetic procedures, including waxing, dermabrasion, chemical peels, laser procedures, or incisional and excisional cold-steel surgery. These recommendations have been followed for over two decades despite little evidence for the stated increased risk of scarring. Objective: The Association of Cutaneous Surgeons (I) constituted a task force to review the evidence and to recommend consensus guidelines regarding the safety of skin procedures, including resurfacing, energy-device treatments, and dermatosurgical procedures in patients with concurrent or recent isotretinoin administration. Materials and Methods: Data were extracted from the literature through a PubMed search using the keywords “isotretinoin,” “safety,” “scarring,” “keloids,” “hypertrophic scarring,” and “pigmentation.” The evidence was then labeled and circulated to all members of task force for review. Results: The task force is of the opinion that there is insufficient evidence to support the current protocol of avoiding and delaying treatments in the patient group under consideration and recommends that the current practice should be discontinued. The task force concludes that performing procedures such as laser hair removal, fractional lasers for aging and acne scarring, lasers for pigmented skin lesions, fractional radio-frequency microneedling, superficial and medium-depth peels, microdermabrasion, dermaroller, biopsies, radio-frequency ablation, and superficial excisions is safe in patients with concurrent or recent isotretinoin administration. PMID:29491653
A European Respiratory Society technical standard: exhaled biomarkers in lung disease.
Horváth, Ildiko; Barnes, Peter J; Loukides, Stelios; Sterk, Peter J; Högman, Marieann; Olin, Anna-Carin; Amann, Anton; Antus, Balazs; Baraldi, Eugenio; Bikov, Andras; Boots, Agnes W; Bos, Lieuwe D; Brinkman, Paul; Bucca, Caterina; Carpagnano, Giovanna E; Corradi, Massimo; Cristescu, Simona; de Jongste, Johan C; Dinh-Xuan, Anh-Tuan; Dompeling, Edward; Fens, Niki; Fowler, Stephen; Hohlfeld, Jens M; Holz, Olaf; Jöbsis, Quirijn; Van De Kant, Kim; Knobel, Hugo H; Kostikas, Konstantinos; Lehtimäki, Lauri; Lundberg, Jon; Montuschi, Paolo; Van Muylem, Alain; Pennazza, Giorgio; Reinhold, Petra; Ricciardolo, Fabio L M; Rosias, Philippe; Santonico, Marco; van der Schee, Marc P; van Schooten, Frederik-Jan; Spanevello, Antonio; Tonia, Thomy; Vink, Teunis J
2017-04-01
Breath tests cover the fraction of nitric oxide in expired gas ( F eNO ), volatile organic compounds (VOCs), variables in exhaled breath condensate (EBC) and other measurements. For EBC and for F eNO , official recommendations for standardised procedures are more than 10 years old and there is none for exhaled VOCs and particles. The aim of this document is to provide technical standards and recommendations for sample collection and analytic approaches and to highlight future research priorities in the field. For EBC and F eNO , new developments and advances in technology have been evaluated in the current document. This report is not intended to provide clinical guidance on disease diagnosis and management.Clinicians and researchers with expertise in exhaled biomarkers were invited to participate. Published studies regarding methodology of breath tests were selected, discussed and evaluated in a consensus-based manner by the Task Force members.Recommendations for standardisation of sampling, analysing and reporting of data and suggestions for research to cover gaps in the evidence have been created and summarised.Application of breath biomarker measurement in a standardised manner will provide comparable results, thereby facilitating the potential use of these biomarkers in clinical practice. Copyright ©ERS 2017.
Performance of NACA Eight-stage Axial-flow Compressor Designed on the Basis of Airfoil Theory
NASA Technical Reports Server (NTRS)
Sinnette, John T; Schey, Oscar W; King, J Austin
1943-01-01
The NACA has conducted an investigation to determine the performance that can be obtained from a multistage axial-flow compressor based on airfoil research. A theory was developed; an eight-stage axial-flow compressor was designed, constructed, and tested. The performance of the compressor was determined for speeds from 5000 to 14,000 r.p.m with varying air flow at each speed. Most of the tests were made with air at room temperature. The performance was determined in accordance with the Committee's recommended procedure for testing superchargers. The expected performance was obtained, showing that a multistage compressor of high efficiency can be designed by the application of airfoil theory.
[Dual Antiplatelet Therapy in the Perioperative Period - To Continue or Discontinue Treatment?
Koscielny, Jürgen; von Heymann, Christian; Zeymer, Uwe; Cremer, Jochen; Spannagl, Michael; Labenz, Joachim; Giannitsis, Evangelos; Goss, Franz
2017-08-01
Background For secondary prevention of acute coronary syndrome, guidelines recommend dual antiplatelet therapy (DAPT) with acetylsalicylic acid and a P2Y12 receptor antagonist such as clopidogrel, prasugrel or ticagrelor for a period of 12 months. Often, uncertainty exists with respect to surgical or diagnostic procedures in these high-risk patients: can the DAPT be continued without interruption? If not, what is the recommended withdrawal strategy? What should be considered for the perioperative management? Methods An interdisciplinary group of experienced experts in the fields of cardiology, cardiac surgery, gastroenterology, anaesthesiology, intensive care and haemostaseology developed recommendations relevant to daily clinical practice based on the current scientific evidence. Results These recommendations include instructions for evaluating the patient- and procedure-specific risks of bleeding and ischaemia, general recommendations regarding the DAPT withdrawal strategy, and specific guidance for frequent surgical or diagnostic procedures. Discussion This article aims to facilitate the management of patients with DAPT for all medical disciplines involved, thereby ensuring optimal care of patients during the perioperative period. © Georg Thieme Verlag KG Stuttgart · New York.
Guney, Mert; Zagury, Gerald J
2012-04-17
High metal contamination in toys and low-cost jewelry is a widespread problem, and metals can become bioavailable, especially via oral pathway due to common child-specific behaviors of mouthing and pica. In this review, the U.S., Canadian, and European Union (EU) legislations on metals in toys and jewelry are evaluated. A literature review on content, bioavailability, children's exposure, and testing of metals in toys and low-cost jewelry is provided. A list of priority metals is presented, and research needs and legislative recommendations are addressed. While the U.S. and Canadian legislations put emphasis on lead exposure prevention, other toxic elements like arsenic and cadmium in toy materials are not regulated except in paint and coatings. The EU legislation is more comprehensive in terms of contaminants and scientific approach. Current toy testing procedures do not fully consider metal bioavailability. In vitro bioaccessibility tests developed and validated for toys and corresponding metal bioaccessibility data in different toy matrices are lacking. The U.S. and Canadian legislations should put more emphasis on metal bioavailability and on other metals in addition to lead. A two-step management approach with mandatory testing of toys for total metal concentrations followed by voluntary bioaccessibility testing could be implemented.
20 CFR 702.272 - Informal recommendation by district director.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Informal recommendation by district director... Procedures Discrimination § 702.272 Informal recommendation by district director. (a) If the district... employee accept the district director's recommendation, it will be incorporated in an order and mailed to...
Chamberlain, Charlotte A; Martin, Richard M; Busby, John; Gilbert, Rebecca; Cahill, David J; Hollingworth, William
2013-02-06
National Institute for Health and Clinical Excellence (NICE) clinical guidelines and subsequent NICE issued 'recommendation reminders' advocate discontinuing two fertility procedures and caesarean sections in women with hepatitis. We assess whether NICE guidance in 2004 and recommendation reminders were associated with a change in the rate of clinical procedures performed. Routine inpatient Hospital Episode Statistics (HES) data were extracted from the HES database for 1st April 1998 to 31st March 2010 using OPCS procedure codes for varicocele operations in infertile men, endometrial biopsies in infertile women and caesarean sections in women with hepatitis B or C. We used Joinpoint regression to identify points in time when the trend in procedure rates changed markedly, to identify any influence of the release of NICE guidance. Between 1998-2010, planned caesarean sections in women with and without hepatitis B or C increased yearly (annual percentage change (APC) 4.9%, 95% CI 2.1% to 7.7%) in women with hepatitis, compared with women without (APC 4.0% [95% CI 2.7% to 5.3%] up to 2001, APC -0.6% [95% CI -2.8% to 1.8%] up to 2004 and 1.3% [95% CI 0.8% to 1.8%] up to 2010). In infertile women under 40 years of age, endometrial biopsies for investigation of infertility increased, APC 6.0% (95% CI 3.6% to 8.4%) up to 2003, APC 1.5% (95% CI -4.3% to 7.7%) to 2007 followed by APC 12.8% (95% CI 1.0% to 26.0%) to 2010. Varicocele procedures remained relatively static between 1998 and 2010 (APC -0.5%, 95% CI -2.3% to 1.3%). There was no decline in use of the three studied procedures, contrary to NICE guidance, and no change in uptake associated with the timing of NICE guidance or recommendation reminders. 'Do not do' recommendation reminders may be ineffective at improving clinical practice or achieving disinvestment.
Bleu, Géraldine; Merlot, Benjamin; Boulanger, Loïc; Vinatier, Denis; Kerdraon, Olivier; Collinet, Pierre
2015-01-01
Objective Since European Society for Medical Oncology (ESMO) recommendations and French guidelines, pelvic lymphadenectomy should not be systematically performed for women with early-stage endometrioid endometrial cancer (EEC) preoperatively assessed at presumed low- or intermediate-risk. The aim of our study was to evaluate the change of our surgical practices after ESMO recommendations, and to evaluate the rate and morbidity of second surgical procedure in case of understaging after the first surgery. Methods This retrospective single-center study included women with EEC preoperatively assessed at presumed low- or intermediate-risk who had surgery between 2006 and 2013. Two periods were defined the times before and after ESMO recommendations. Demographics characteristics, surgical management, operative morbidity, and rate of understaging were compared. The rate of second surgical procedure required for lymph node resection during the second period and its morbidity were also studied. Results Sixty-one and sixty-two patients were operated for EEC preoperatively assessed at presumed low-or intermediate-risk before and after ESMO recommendations, respectively. Although immediate pelvic lymphadenectomy was performed more frequently during the first period than the second period (88.5% vs. 19.4%; p<0.001), the rate of postoperative risk-elevating or upstaging were comparable between the two periods (31.1% vs. 27.4%; p=0.71). Among the patients requiring second surgical procedure during the second period (21.0%), 30.8% did not undergo the second surgery due to their comorbidity or old age. For the patients who underwent second surgical procedure, mean operative time of the second procedure was 246.1±117.8 minutes. Third operation was required in 33.3% of them because of postoperative complications. Conclusion Since ESMO recommendations, second surgical procedure for lymph node resection is often required for women with EEC presumed at low- or intermediate-risk. This reoperation is not always performed due to age/comorbidity of the patients, and presents a significant morbidity. PMID:25872893
Space solar array reliability: A study and recommendations
NASA Astrophysics Data System (ADS)
Brandhorst, Henry W., Jr.; Rodiek, Julie A.
2008-12-01
Providing reliable power over the anticipated mission life is critical to all satellites; therefore solar arrays are one of the most vital links to satellite mission success. Furthermore, solar arrays are exposed to the harshest environment of virtually any satellite component. In the past 10 years 117 satellite solar array anomalies have been recorded with 12 resulting in total satellite failure. Through an in-depth analysis of satellite anomalies listed in the Airclaim's Ascend SpaceTrak database, it is clear that solar array reliability is a serious, industry-wide issue. Solar array reliability directly affects the cost of future satellites through increased insurance premiums and a lack of confidence by investors. Recommendations for improving reliability through careful ground testing, standardization of testing procedures such as the emerging AIAA standards, and data sharing across the industry will be discussed. The benefits of creating a certified module and array testing facility that would certify in-space reliability will also be briefly examined. Solar array reliability is an issue that must be addressed to both reduce costs and ensure continued viability of the commercial and government assets on orbit.
Kopeć, Renata; Bubak, Anna; Budzanowski, Maciej; Sas-Bieniarz, Anna; Szumska, Agnieszka
2016-09-01
Stringent standards of hygiene must be applied in medical institutions, especially at operating blocks or during interventional radiology procedures. Medical equipment, including personal dosemeters that have to be worn by medical staff during such procedures, needs therefore to be sterilised. In this study, the effect of various sterilisation procedures has been tested on the dose response of extremity rings and of eye lens dosemeters in which thermoluminescent (TL) detectors (of types MTS-N and MCP-N, respectively) are used. The effects of medical sterilisation procedures were studied: by chemicals, by steam or by ultraviolet (UV), on the dose assessment by extremity rings and by eye lens dosemeters. Since it often happens that a dosemeter is accidentally machine-washed together with protective clothing, the effect of laundering on dose assessment by these dosemeters was also tested. The sterilisation by chemicals is mostly safe for TL detectors assuming that the dosemeters are waterproofed. Following sterilisation by water vapour, the response of these dosemeters diminished by some 30 %, irrespectively of the period of sterilisation; therefore, this method is not recommended. UV sterilisation can be applied to EYE-D™ eye lens dosemeters if their encapsulation is in black. The accidental dosemeter laundry in a washing machine has no impact on measured dose. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
Test/score/report: Simulation techniques for automating the test process
NASA Technical Reports Server (NTRS)
Hageman, Barbara H.; Sigman, Clayton B.; Koslosky, John T.
1994-01-01
A Test/Score/Report capability is currently being developed for the Transportable Payload Operations Control Center (TPOCC) Advanced Spacecraft Simulator (TASS) system which will automate testing of the Goddard Space Flight Center (GSFC) Payload Operations Control Center (POCC) and Mission Operations Center (MOC) software in three areas: telemetry decommutation, spacecraft command processing, and spacecraft memory load and dump processing. Automated computer control of the acceptance test process is one of the primary goals of a test team. With the proper simulation tools and user interface, the task of acceptance testing, regression testing, and repeatability of specific test procedures of a ground data system can be a simpler task. Ideally, the goal for complete automation would be to plug the operational deliverable into the simulator, press the start button, execute the test procedure, accumulate and analyze the data, score the results, and report the results to the test team along with a go/no recommendation to the test team. In practice, this may not be possible because of inadequate test tools, pressures of schedules, limited resources, etc. Most tests are accomplished using a certain degree of automation and test procedures that are labor intensive. This paper discusses some simulation techniques that can improve the automation of the test process. The TASS system tests the POCC/MOC software and provides a score based on the test results. The TASS system displays statistics on the success of the POCC/MOC system processing in each of the three areas as well as event messages pertaining to the Test/Score/Report processing. The TASS system also provides formatted reports documenting each step performed during the tests and the results of each step. A prototype of the Test/Score/Report capability is available and currently being used to test some POCC/MOC software deliveries. When this capability is fully operational it should greatly reduce the time necessary to test a POCC/MOC software delivery, as well as improve the quality of the test process.
Pressure control and analysis report: Hydrogen Thermal Test Article (HTTA)
NASA Technical Reports Server (NTRS)
1971-01-01
Tasks accomplished during the HTTA Program study period included: (1) performance of a literature review to provide system guidelines; (2) development of analytical procedures needed to predict system performance; (3) design and analysis of the HTTA pressurization system considering (a) future utilization of results in the design of a spacecraft maneuvering system propellant package, (b) ease of control and operation, (c) system safety, and (d) hardware cost; and (4) making conclusions and recommendations for systems design.
Video instrumentation for radionuclide angiocardiography.
NASA Technical Reports Server (NTRS)
Kriss, J. P.
1973-01-01
Two types of videoscintiscopes for performing radioisotopic angiocardiography with a scintillation camera are described, and use of these instruments in performing clinical studies is illustrated. Radionuclide angiocardiography is a simple, quick and accurate procedure recommended as a screening test for patients with a variety of congenital and acquired cardiovascular lesions. When performed in conjunction with coronary arterial catheterization, dynamic radionuclide angiography may provide useful information about regional myocardial perfusion. Quantitative capabilities greatly enhance the potential of this diagnostic tool.
Evaluation of ADAM/1 model for advanced coal extraction concepts
NASA Technical Reports Server (NTRS)
Deshpande, G. K.; Gangal, M. D.
1982-01-01
Several existing computer programs for estimating life cycle cost of mining systems were evaluated. A commercially available program, ADAM/1 was found to be satisfactory in relation to the needs of the advanced coal extraction project. Two test cases were run to confirm the ability of the program to handle nonconventional mining equipment and procedures. The results were satisfactory. The model, therefore, is recommended to the project team for evaluation of their conceptual designs.
Statistical inference methods for two crossing survival curves: a comparison of methods.
Li, Huimin; Han, Dong; Hou, Yawen; Chen, Huilin; Chen, Zheng
2015-01-01
A common problem that is encountered in medical applications is the overall homogeneity of survival distributions when two survival curves cross each other. A survey demonstrated that under this condition, which was an obvious violation of the assumption of proportional hazard rates, the log-rank test was still used in 70% of studies. Several statistical methods have been proposed to solve this problem. However, in many applications, it is difficult to specify the types of survival differences and choose an appropriate method prior to analysis. Thus, we conducted an extensive series of Monte Carlo simulations to investigate the power and type I error rate of these procedures under various patterns of crossing survival curves with different censoring rates and distribution parameters. Our objective was to evaluate the strengths and weaknesses of tests in different situations and for various censoring rates and to recommend an appropriate test that will not fail for a wide range of applications. Simulation studies demonstrated that adaptive Neyman's smooth tests and the two-stage procedure offer higher power and greater stability than other methods when the survival distributions cross at early, middle or late times. Even for proportional hazards, both methods maintain acceptable power compared with the log-rank test. In terms of the type I error rate, Renyi and Cramér-von Mises tests are relatively conservative, whereas the statistics of the Lin-Xu test exhibit apparent inflation as the censoring rate increases. Other tests produce results close to the nominal 0.05 level. In conclusion, adaptive Neyman's smooth tests and the two-stage procedure are found to be the most stable and feasible approaches for a variety of situations and censoring rates. Therefore, they are applicable to a wider spectrum of alternatives compared with other tests.
Statistical Inference Methods for Two Crossing Survival Curves: A Comparison of Methods
Li, Huimin; Han, Dong; Hou, Yawen; Chen, Huilin; Chen, Zheng
2015-01-01
A common problem that is encountered in medical applications is the overall homogeneity of survival distributions when two survival curves cross each other. A survey demonstrated that under this condition, which was an obvious violation of the assumption of proportional hazard rates, the log-rank test was still used in 70% of studies. Several statistical methods have been proposed to solve this problem. However, in many applications, it is difficult to specify the types of survival differences and choose an appropriate method prior to analysis. Thus, we conducted an extensive series of Monte Carlo simulations to investigate the power and type I error rate of these procedures under various patterns of crossing survival curves with different censoring rates and distribution parameters. Our objective was to evaluate the strengths and weaknesses of tests in different situations and for various censoring rates and to recommend an appropriate test that will not fail for a wide range of applications. Simulation studies demonstrated that adaptive Neyman’s smooth tests and the two-stage procedure offer higher power and greater stability than other methods when the survival distributions cross at early, middle or late times. Even for proportional hazards, both methods maintain acceptable power compared with the log-rank test. In terms of the type I error rate, Renyi and Cramér—von Mises tests are relatively conservative, whereas the statistics of the Lin-Xu test exhibit apparent inflation as the censoring rate increases. Other tests produce results close to the nominal 0.05 level. In conclusion, adaptive Neyman’s smooth tests and the two-stage procedure are found to be the most stable and feasible approaches for a variety of situations and censoring rates. Therefore, they are applicable to a wider spectrum of alternatives compared with other tests. PMID:25615624
ASCCP Colposcopy Standards: Colposcopy Quality Improvement Recommendations for the United States.
Mayeaux, Edward J; Novetsky, Akiva P; Chelmow, David; Garcia, Francisco; Choma, Kim; Liu, Angela H; Papasozomenos, Theognosia; Einstein, Mark H; Massad, L Stewart; Wentzensen, Nicolas; Waxman, Alan G; Conageski, Christine; Khan, Michelle J; Huh, Warner K
2017-10-01
The American Society for Colposcopy and Cervical Pathology (ASCCP) Colposcopy Standards recommendations address the role of and approach to colposcopy and biopsy for cervical cancer prevention in the United States. The recommendations were developed by an expert working group appointed by ASCCP's Board of Directors. The ASCCP Quality Improvement Working Group developed evidence-based guidelines to promote best practices and reduce errors in colposcopy and recommended indicators to measure colposcopy quality. The working group performed a systematic review of existing major society and national guidelines and quality indicators. An initial list of potential quality indicators was developed and refined through successive iterative discussions, and draft quality indicators were proposed. The draft recommendations were then reviewed and commented on by the entire Colposcopy Standards Committee, posted online for public comment, and presented at the International Federation for Cervical Pathology and Colposcopy 2017 World Congress for further comment. All comments were considered, additional adjustments made, and the final recommendations approved by the entire Task Force. Eleven quality indicators were selected spanning documentation, biopsy protocols, and time intervals between index screening tests and completion of diagnostic evaluation. The proposed quality indicators are intended to serve as a starting point for quality improvement in colposcopy at a time when colposcopy volume is decreasing and individual procedures are becoming technically more difficult to perform.
Antimicrobial efficacy of a novel povidone iodine contact lens disinfection system.
Yamasaki, Katsuhide; Saito, Fumio; Ota, Ritsue; Kilvington, Simon
2018-06-01
Contact lens (CL) wear is a risk factor for the acquisition of microbial keratitis. Accordingly, compliance to manufacturers' recommended hygiene and disinfection procedures are vital to safe (CL) use. In this study we evaluated a novel povidone-iodine (PI) (CL) disinfection system (cleadew, Ophtecs Corporation, Japan) against a range of bacterial, fungal and Acanthamoeba. Antimicrobial assays were conducted according to ISO 14729 using the recommended strains of bacteria and fungi, with and without the presence of organic soil. Regrowth of bacteria and fungi in the disinfection system was also examined. The activity on biofilms formed from Stenotrophomonas maltophilia and Achromobacter sp. was evaluated. Efficacy against A. castellanii trophozoites and cysts was also investigated. The PI system gave >4 log 10 kill of all bacteria and fungi following the manufacturer's recommended disinfection and cleaning time of 4h, with or without the presence of organic soil. No regrowth of organisms was found after 14days in the neutralized solution. In the biofilm studies the system resulted in at least a 7 log 10 reduction in viability of bacteria. For Acanthamoeba, >3 log 10 kill of trophozoites and 1.1-2.8 log 10 kill for the cyst stage was obtained. The PI system effective against a variety of pathogenic microorganisms under a range of test conditions. Strict compliance to recommended CL hygiene procedures is essential for safe CL wear. The use of care systems such as PI, with broad spectrum antimicrobial activity, may aid in the prevention of potentially sight threatening microbial keratitis. Copyright © 2017. Published by Elsevier Ltd.
Diagnosis and treatment of haemorrhoids.
Buntzen, Steen; Christensen, Peter; Khalid, Ali; Ljungmann, Ken; Lindholt, Jan; Lundby, Lilli; Walker, Line Rossell; Raahave, Dennis; Qvist, Niels
2013-12-01
These guidelines provide a review of diagnosis, conservative and surgical treatment of haemorrhoids with primary focus on the surgical treatment. In symptomatic hemorrhoids it is recommended, that conservative treatment is used as basic treatment regardless of grading. The vast majority of grade II haemorrhoids are treated conservatively, but surgery may be considered in a few cases with pronounced symptoms. In these cases chirurgia minor, Doppler guided dearterilization procedures or stapled haemorrhoidopexy are recommended. In grade III and IV Doppler guided dearterilization procedures, stapled haemorrhoidopexy (Grade III) or conventional Milligan Morgan haemorrhoidectomy are recommended.
12 CFR 263.38 - Recommended decision and filing of record.
Code of Federal Regulations, 2010 CFR
2010-01-01
... FEDERAL RESERVE SYSTEM RULES OF PRACTICE FOR HEARINGS Uniform Rules of Practice and Procedure § 263.38... expiration of the time allowed for filing reply briefs under § 263.37(b), the administrative law judge shall... the administrative law judge's recommended decision, recommended findings of fact, recommended...
22 CFR 1471.8 - Report and recommendations.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Report and recommendations. 1471.8 Section 1471... FOREIGN SERVICE IMPASSE DISPUTES PANEL PROCEDURES OF THE PANEL § 1471.8 Report and recommendations. (a... be in writing and, when authorized by the Panel, shall contain recommendations. (b) A report of the...
22 CFR 1471.8 - Report and recommendations.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Report and recommendations. 1471.8 Section 1471... FOREIGN SERVICE IMPASSE DISPUTES PANEL PROCEDURES OF THE PANEL § 1471.8 Report and recommendations. (a... be in writing and, when authorized by the Panel, shall contain recommendations. (b) A report of the...
41 CFR 60-30.36 - Exceptions to recommendations.
Code of Federal Regulations, 2010 CFR
2010-07-01
... recommendations. 60-30.36 Section 60-30.36 Public Contracts and Property Management Other Provisions Relating to... EXECUTIVE ORDER 11246 Expedited Hearing Procedures § 60-30.36 Exceptions to recommendations. Within 10 days... said recommendations. Exceptions may be responded to by other parties within 7 days after receipt by...
46 CFR 4.07-15 - Recommendations, action on.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 1 2010-10-01 2010-10-01 false Recommendations, action on. 4.07-15 Section 4.07-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC MARINE CASUALTIES AND INVESTIGATIONS Investigations § 4.07-15 Recommendations, action on. Where the recommendations of...
41 CFR 60-30.36 - Exceptions to recommendations.
Code of Federal Regulations, 2011 CFR
2011-07-01
... recommendations. 60-30.36 Section 60-30.36 Public Contracts and Property Management Other Provisions Relating to... EXECUTIVE ORDER 11246 Expedited Hearing Procedures § 60-30.36 Exceptions to recommendations. Within 10 days... said recommendations. Exceptions may be responded to by other parties within 7 days after receipt by...
46 CFR 4.07-15 - Recommendations, action on.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 1 2011-10-01 2011-10-01 false Recommendations, action on. 4.07-15 Section 4.07-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC MARINE CASUALTIES AND INVESTIGATIONS Investigations § 4.07-15 Recommendations, action on. Where the recommendations of...
Uptakes of Cs and Sr on San Joaquin soil measured following ASTM method C1733.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ebert, W.L.; Petri, E.T.
2012-04-04
Series of tests were conducted following ASTM Standard Procedure C1733 to evaluate the repeatability of the test and the effects of several test parameters, including the solution-to-soil mass ratio, test duration, pH, and the concentrations of contaminants in the solution. This standard procedure is recommended for measuring the distribution coefficient (K{sub d}) of a contaminant in a specific soil/groundwater system. One objective of the current tests was to identify experimental conditions that can be used in future interlaboratory studies to determine the reproducibility of the test method. This includes the recommendation of a standard soil, the range of contaminant concentrationsmore » and solution matrix, and various test parameters. Quantifying the uncertainty in the distribution coefficient that can be attributed to the test procedure itself allows the differences in measured values to be associated with differences in the natural systems being studied. Tests were conducted to measure the uptake of Cs and Sr dissolved as CsCl and Sr(NO{sub 3}){sub 2} in a dilute NaHCO{sub 3}/SiO{sub 2} solution (representing contaminants in a silicate groundwater) by a NIST standard reference material of San Joaquin soil (SRM 2709a). Tests were run to measure the repeatability of the method and the sensitivity of the test response to the reaction time, the mass of soil used (at a constant soil-to-solution ratio), the solution pH, and the contaminant concentration. All tests were conducted in screw-top Teflon vessels at 30 C in an oven. All solutions were passed through a 0.45-{mu}m pore size cellulose acetate membrane filter and stabilized with nitric acid prior to analysis with inductively-coupled plasma mass spectrometry (ICP-MS). Scoping tests with soil in demineralized water resulted in a solution pH of about 8.0 and the release of small amounts of Sr from the soil. Solutions were made with targeted concentrations of 1 x 10{sup -6} m, 1 x 10{sup -5} m, 2.5 x 10{sup -5} m, 5 x 10{sup -5} m, 1 x 10{sup -4} m, and 5 x 10{sup -4} m to measure the effects of the Cs and Sr concentrations on their uptake by the soil. The pH values of all solutions were adjusted to about pH 8.5 so that the effects of pH and concentration could be measured separately. The 1 x 10{sup -4} m solutions were used to measure the repeatability of the test and the effects of duration, scale, and imposed pH on the test response.« less
Desneux, Jérémy; Pourcher, Anne-Marie
2014-01-01
Four commercial DNA extraction kits and a minor modification in the DNA elution procedure were evaluated for the quantitation of bacteria in pig manure samples. The PowerSoil®, PowerFecal®, NucleoSpin® Soil kits and QIAamp® DNA Stool Mini kit were tested on raw manure samples and on lagoon effluents for their ability to quantify total bacteria and a subdominant bacteria specific of pig manure contamination: Lactobacillus amylovorus. The NucleoSpin® Soil kit (NS kit), and to a lesser extent the PowerFecal® kit were the most efficient methods. Regardless of the kit utilized, the modified elution procedure increased DNA yield in the lagoon effluent by a factor of 1.4 to 1.8. When tested on 10 piggery effluent samples, compared to the QIAamp kit, the NS kit combined with the modified elution step, increased by a factor up to 1.7 log10 the values of the concentration of L. amylovorus. Regardless of the type of manure, the best DNA quality and the highest concentrations of bacteria were obtained using the NS kit combined with the modification of the elution procedure. The method recommended here significantly improved quantitation of subdominant bacteria in manure. PMID:24838631
Finite Element Vibration Modeling and Experimental Validation for an Aircraft Engine Casing
NASA Astrophysics Data System (ADS)
Rabbitt, Christopher
This thesis presents a procedure for the development and validation of a theoretical vibration model, applies this procedure to a pair of aircraft engine casings, and compares select parameters from experimental testing of those casings to those from a theoretical model using the Modal Assurance Criterion (MAC) and linear regression coefficients. A novel method of determining the optimal MAC between axisymmetric results is developed and employed. It is concluded that the dynamic finite element models developed as part of this research are fully capable of modelling the modal parameters within the frequency range of interest. Confidence intervals calculated in this research for correlation coefficients provide important information regarding the reliability of predictions, and it is recommended that these intervals be calculated for all comparable coefficients. The procedure outlined for aligning mode shapes around an axis of symmetry proved useful, and the results are promising for the development of further optimization techniques.
Commentary on Steinley and Brusco (2011): Recommendations and Cautions
ERIC Educational Resources Information Center
McLachlan, Geoffrey J.
2011-01-01
I discuss the recommendations and cautions in Steinley and Brusco's (2011) article on the use of finite models to cluster a data set. In their article, much use is made of comparison with the "K"-means procedure. As noted by researchers for over 30 years, the "K"-means procedure can be viewed as a special case of finite mixture modeling in which…
NASA Technical Reports Server (NTRS)
Bailey, G. D.; Tenoso, H. J.
1975-01-01
An attempt was made to develop a test requiring no preadsorption steps for the assessment of antibodies to rubella and mumps viruses using the passive immune agglutination (PIA) method. Both rubella and mumps antigens and antibodies were prepared. Direct PIA tests, using rubella antigen-coated beads, and indirect PIA tests, using rubella antibody-coated beads, were investigated. Attempts, using either method, were unsuccessful. Serum interference along with nonspecific agglutination of beads by the rubella antigen resulted in no specific response under the test conditions investigated. A new, highly sensitive approach, the enzyme immunoassay (EIA) test system, is recommended to overcome the nonspecificity. This system is a logical outgrowth of some of the solid phase work done on MEMS and represents the next generation tests system that can be directly applied to early disease detection and monitoring.
Toutain, Pierre-Louis; Bousquet-Mélou, Alain; Damborg, Peter; Ferran, Aude A; Mevius, Dik; Pelligand, Ludovic; Veldman, Kees T; Lees, Peter
2017-01-01
VetCAST is the EUCAST sub-committee for Veterinary Antimicrobial Susceptibility Testing. Its remit is to define clinical breakpoints (CBPs) for antimicrobial drugs (AMDs) used in veterinary medicine in Europe. This position paper outlines the procedures and reviews scientific options to solve challenges for the determination of specific CBPs for animal species, drug substances and disease conditions. VetCAST will adopt EUCAST approaches: the initial step will be data assessment; then procedures for decisions on the CBP; and finally the release of recommendations for CBP implementation. The principal challenges anticipated by VetCAST are those associated with the differing modalities of AMD administration, including mass medication, specific long-acting product formulations or local administration. Specific challenges comprise mastitis treatment in dairy cattle, the range of species and within species breed considerations and several other variable factors not relevant to human medicine. Each CBP will be based on consideration of: (i) an epidemiological cut-off value (ECOFF) - the highest MIC that defines the upper end of the wild-type MIC distribution; (ii) a PK/PD breakpoint obtained from pre-clinical pharmacokinetic data [this PK/PD break-point is the highest possible MIC for which a given percentage of animals in the target population achieves a critical value for the selected PK/PD index ( f AUC/MIC or f T > MIC)] and (iii) when possible, a clinical cut-off, that is the relationship between MIC and clinical cure. For the latter, VetCAST acknowledges the paucity of such data in veterinary medicine. When a CBP cannot be established, VetCAST will recommend use of ECOFF as surrogate. For decision steps, VetCAST will follow EUCAST procedures involving transparency, consensus and independence. VetCAST will ensure freely available dissemination of information, concerning standards, guidelines, ECOFF, PK/PD breakpoints, CBPs and other relevant information for AST implementation. Finally, after establishing a CBP, VetCAST will promulgate expert comments and/or recommendations associated with CBPs to facilitate their sound implementation in a clinical setting.
Toutain, Pierre-Louis; Bousquet-Mélou, Alain; Damborg, Peter; Ferran, Aude A.; Mevius, Dik; Pelligand, Ludovic; Veldman, Kees T.; Lees, Peter
2017-01-01
VetCAST is the EUCAST sub-committee for Veterinary Antimicrobial Susceptibility Testing. Its remit is to define clinical breakpoints (CBPs) for antimicrobial drugs (AMDs) used in veterinary medicine in Europe. This position paper outlines the procedures and reviews scientific options to solve challenges for the determination of specific CBPs for animal species, drug substances and disease conditions. VetCAST will adopt EUCAST approaches: the initial step will be data assessment; then procedures for decisions on the CBP; and finally the release of recommendations for CBP implementation. The principal challenges anticipated by VetCAST are those associated with the differing modalities of AMD administration, including mass medication, specific long-acting product formulations or local administration. Specific challenges comprise mastitis treatment in dairy cattle, the range of species and within species breed considerations and several other variable factors not relevant to human medicine. Each CBP will be based on consideration of: (i) an epidemiological cut-off value (ECOFF) – the highest MIC that defines the upper end of the wild-type MIC distribution; (ii) a PK/PD breakpoint obtained from pre-clinical pharmacokinetic data [this PK/PD break-point is the highest possible MIC for which a given percentage of animals in the target population achieves a critical value for the selected PK/PD index (fAUC/MIC or fT > MIC)] and (iii) when possible, a clinical cut-off, that is the relationship between MIC and clinical cure. For the latter, VetCAST acknowledges the paucity of such data in veterinary medicine. When a CBP cannot be established, VetCAST will recommend use of ECOFF as surrogate. For decision steps, VetCAST will follow EUCAST procedures involving transparency, consensus and independence. VetCAST will ensure freely available dissemination of information, concerning standards, guidelines, ECOFF, PK/PD breakpoints, CBPs and other relevant information for AST implementation. Finally, after establishing a CBP, VetCAST will promulgate expert comments and/or recommendations associated with CBPs to facilitate their sound implementation in a clinical setting. PMID:29326661
Best, Rebecca R; Harris, Benjamin H L; Walsh, Jason L; Manfield, Timothy
2017-05-08
Drowning is one of the leading causes of death in children. Resuscitating a child following submersion is a high-pressure situation, and standard operating procedures can reduce error. Currently, the Resuscitation Council UK guidance does not include a standard operating procedure on pediatric drowning. The objective of this project was to design a standard operating procedure to improve outcomes of drowned children. A literature review on the management of pediatric drowning was conducted. Relevant publications were used to develop a standard operating procedure for management of pediatric drowning. A concise standard operating procedure was developed for resuscitation following pediatric submersion. Specific recommendations include the following: the Heimlich maneuver should not be used in this context; however, prolonged resuscitation and therapeutic hypothermia are recommended. This standard operating procedure is a potentially useful adjunct to the Resuscitation Council UK guidance and should be considered for incorporation into its next iteration.