NASA Technical Reports Server (NTRS)
Federhofer, J. A.
1974-01-01
Laboratory data verifying the pulse quaternary modulation (PQM) theoretical predictions is presented. The first laboratory PQM laser communication system was successfully fabricated, integrated, tested and demonstrated. System bit error rate tests were performed and, in general, indicated approximately a 2 db degradation from the theoretically predicted results. These tests indicated that no gross errors were made in the initial theoretical analysis of PQM. The relative ease with which the entire PQM laboratory system was integrated and tested indicates that PQM is a viable candidate modulation scheme for an operational 400 Mbps baseband laser communication system.
Si, Guo-Ning; Chen, Lan; Li, Bao-Guo
2014-04-01
Base on the Kawakita powder compression equation, a general theoretical model for predicting the compression characteristics of multi-components pharmaceutical powders with different mass ratios was developed. The uniaxial flat-face compression tests of powder lactose, starch and microcrystalline cellulose were carried out, separately. Therefore, the Kawakita equation parameters of the powder materials were obtained. The uniaxial flat-face compression tests of the powder mixtures of lactose, starch, microcrystalline cellulose and sodium stearyl fumarate with five mass ratios were conducted, through which, the correlation between mixture density and loading pressure and the Kawakita equation curves were obtained. Finally, the theoretical prediction values were compared with experimental results. The analysis showed that the errors in predicting mixture densities were less than 5.0% and the errors of Kawakita vertical coordinate were within 4.6%, which indicated that the theoretical model could be used to predict the direct compaction characteristics of multi-component pharmaceutical powders.
Path Analysis Tests of Theoretical Models of Children's Memory Performance
ERIC Educational Resources Information Center
DeMarie, Darlene; Miller, Patricia H.; Ferron, John; Cunningham, Walter R.
2004-01-01
Path analysis was used to test theoretical models of relations among variables known to predict differences in children's memory--strategies, capacity, and metamemory. Children in kindergarten to fourth grade (chronological ages 5 to 11) performed different memory tasks. Several strategies (i.e., sorting, clustering, rehearsal, and self-testing)…
NASA Technical Reports Server (NTRS)
Anderson, J. K.; DAVIS R. C.
1973-01-01
Two ring-stiffened magnesium conical shells with a 120 deg apex angle and a 4.6-meter diameter were loaded to failure by a uniform external pressure. The cones differed from one another only in the number of internal stiffening rings. Test specimen details, test procedure, and test results are discussed. Both buckling and prebuckling data are compared with appropriate theoretical predictions. Measured strains in skin and rings agreed well with theoretical predictions. Extensive imperfection measurements were made and reported on both cones in the as fabricated condition.
Analysis of NASA JP-4 fire tests data and development of a simple fire model
NASA Technical Reports Server (NTRS)
Raj, P.
1980-01-01
The temperature, velocity and species concentration data obtained during the NASA fire tests (3m, 7.5m and 15m diameter JP-4 fires) were analyzed. Utilizing the data analysis, a sample theoretical model was formulated to predict the temperature and velocity profiles in JP-4 fires. The theoretical model, which does not take into account the detailed chemistry of combustion, is capable of predicting the extent of necking of the fire near its base.
NASA Technical Reports Server (NTRS)
Walker, R.; Gupta, N.
1984-01-01
The important algorithm issues necessary to achieve a real time flutter monitoring system; namely, the guidelines for choosing appropriate model forms, reduction of the parameter convergence transient, handling multiple modes, the effect of over parameterization, and estimate accuracy predictions, both online and for experiment design are addressed. An approach for efficiently computing continuous-time flutter parameter Cramer-Rao estimate error bounds were developed. This enables a convincing comparison of theoretical and simulation results, as well as offline studies in preparation for a flight test. Theoretical predictions, simulation and flight test results from the NASA Drones for Aerodynamic and Structural Test (DAST) Program are compared.
Lytle, Amy; Jacobs, D T
2004-03-22
The turbidity of the liquid-liquid mixture methanol-cyclohexane has been measured very near its critical point and used to test competing theoretical predictions and to determine the critical correlation-correction exponent eta. By measuring the ratio of the transmitted to incident light intensities over five decades in reduced temperature, we are able to determine that Ferrell's theoretical prediction for the turbidity explains the data with the correlation length amplitude xi0=0.330+/-0.003 nm and critical exponents eta=0.041+/-0.005 and nu=0.632+/-0.002. These values are consistent with the values measured before for xi0 in this system and with the exponents predicted by theory. The data allow five different theoretical expressions to be tested and to select two as being equivalent when very close to the critical point. (c) 2004 American Institute of Physics
Advancement of proprotor technology. Task 2: Wind-tunnel test results
NASA Technical Reports Server (NTRS)
1971-01-01
An advanced-design 25-foot-diameter flightworthy proprotor was tested in the NASA-Ames Large-Scale Wind Tunnel. These tests, have verified and confirmed the theory and design solutions developed as part of the Army Composite Aircraft Program. This report presents the test results and compares them with theoretical predictions. During performance tests, the results met or exceeded predictions. Hover thrust 15 percent greater than the predicted maximum was measured. In airplane mode, propulsive efficiencies (some of which exceeded 90 percent) agreed with theory.
Locke, Thomas F; Newcomb, Michael
2004-03-01
The authors tested how adverse childhood experiences (child maltreatment and parent alcohol- and drug-related problems) and adult polydrug use (as a mediator) predict poor parenting in a community sample (237 mothers and 81 fathers). These relationships were framed within several theoretical perspectives, including observational learning, impaired functioning, self-medication, and parentification-pseudomaturity. Structural models revealed that child maltreatment predicted poor parenting practices among mothers. Parent alcohol- and drug-related problems had an indirect detrimental influence on mothers' parenting and practices through self-drug problems. Among fathers, emotional neglect experienced as a child predicted lack of parental warmth more parental neglect, and sexual abuse experienced as a child predicted a rejecting style of parenting.
Flight-Test Evaluation of Flutter-Prediction Methods
NASA Technical Reports Server (NTRS)
Lind, RIck; Brenner, Marty
2003-01-01
The flight-test community routinely spends considerable time and money to determine a range of flight conditions, called a flight envelope, within which an aircraft is safe to fly. The cost of determining a flight envelope could be greatly reduced if there were a method of safely and accurately predicting the speed associated with the onset of an instability called flutter. Several methods have been developed with the goal of predicting flutter speeds to improve the efficiency of flight testing. These methods include (1) data-based methods, in which one relies entirely on information obtained from the flight tests and (2) model-based approaches, in which one relies on a combination of flight data and theoretical models. The data-driven methods include one based on extrapolation of damping trends, one that involves an envelope function, one that involves the Zimmerman-Weissenburger flutter margin, and one that involves a discrete-time auto-regressive model. An example of a model-based approach is that of the flutterometer. These methods have all been shown to be theoretically valid and have been demonstrated on simple test cases; however, until now, they have not been thoroughly evaluated in flight tests. An experimental apparatus called the Aerostructures Test Wing (ATW) was developed to test these prediction methods.
Contact thermal shock test of ceramics
NASA Technical Reports Server (NTRS)
Rogers, W. P.; Emery, A. F.
1992-01-01
A novel quantitative thermal shock test of ceramics is described. The technique employs contact between a metal-cooling rod and hot disk-shaped specimen. In contrast with traditional techniques, the well-defined thermal boundary condition allows for accurate analyses of heat transfer, stress, and fracture. Uniform equibiaxial tensile stresses are induced in the center of the test specimen. Transient specimen temperature and acoustic emission are monitored continuously during the thermal stress cycle. The technique is demonstrated with soda-lime glass specimens. Experimental results are compared with theoretical predictions based on a finite-element method thermal stress analysis combined with a statistical model of fracture. Material strength parameters are determined using concentric ring flexure tests. Good agreement is found between experimental results and theoretical predictions of failure probability as a function of time and initial specimen temperature.
NASA Astrophysics Data System (ADS)
Kim, Yeong E.; Passell, Thomas O.
2006-02-01
Recently, a generalization of the Bose-Einstein condensation (BEC) mechanism has been made to a ground-state mixture of two different species of positively charged bosons in harmonic traps. The theory has been used to describe (D + Li) reactions in the low energy nuclear reaction (LENR) processes in condensed matter and predicts that the (D + Li) reaction rates can be larger than (D + D) reaction rates by as much as a factor of ~50, implying that (D + Li) reactions may be occuring in addition to the (D + D) reactions. A survey of the existing data from LENR experiments is carried out to check the validity of the theoretical prediction. We conclude that there is compelling experimental evidence which support the theoretical prediction. New experimental tests of the theoretical prediction are suggested.
Shear properties of pultruded fiber reinforced polymer composite materials
NASA Astrophysics Data System (ADS)
Seo, J. H.; Kim, S. H.; Ok, D. M.; An, D. J.; Yoon, S. J.
2018-06-01
This paper focuses on the mechanical properties of PFRP composite materials. Especially, relationship between shear property and the other mechanical properties of PFRP composite materials is investigated through comparison between experimental and theoretical results. The shear property of PFRP composite specimen is calculated from the theoretical equations which were suggested in previous studies. In addition, comparison between the shear property determined by the tensile test and the shear property calculated from theoretical equations is conducted and discussed. It was found that the theoretically predicted shear modulus of elasticity considering contiguity is close to the shear modulus of elasticity obtained by the 45° off-axis tensile test.
NASA Astrophysics Data System (ADS)
Kochukhov, O.; Ryabchikova, T. A.
2018-02-01
A series of recent theoretical atomic diffusion studies has address the challenging problem of predicting inhomogeneous vertical and horizontal chemical element distributions in the atmospheres of magnetic ApBp stars. Here we critically assess the most sophisticated of such diffusion models - based on a time-dependent treatment of the atomic diffusion in a magnetized stellar atmosphere - by direct comparison with observations as well by testing the widely used surface mapping tools with the spectral line profiles predicted by this theory. We show that the mean abundances of Fe and Cr are grossly underestimated by the time-dependent theoretical diffusion model, with discrepancies reaching a factor of 1000 for Cr. We also demonstrate that Doppler imaging inversion codes, based either on modelling of individual metal lines or line-averaged profiles simulated according to theoretical three-dimensional abundance distribution, are able to reconstruct correct horizontal chemical spot maps despite ignoring the vertical abundance variation. These numerical experiments justify a direct comparison of the empirical two-dimensional Doppler maps with theoretical diffusion calculations. This comparison is generally unfavourable for the current diffusion theory, as very few chemical elements are observed to form overabundance rings in the horizontal field regions as predicted by the theory and there are numerous examples of element accumulations in the vicinity of radial field zones, which cannot be explained by diffusion calculations.
Sung, Jaeyoung
2007-07-01
We present an exact theoretical test of Jarzynski's equality (JE) for reversible volume-switching processes of an ideal gas system. The exact analysis shows that the prediction of JE for the free energy difference is the same as the work done on the gas system during the reversible process that is dependent on the shape of path of the reversible volume-switching process.
An experimental and theoretical investigation of deposition patterns from an agricultural airplane
NASA Technical Reports Server (NTRS)
Morris, D. J.; Croom, C. C.; Vandam, C. P.; Holmes, B. J.
1984-01-01
A flight test program has been conducted with a representative agricultural airplane to provide data for validating a computer program model which predicts aerially applied particle deposition. Test procedures and the data from this test are presented and discussed. The computer program features are summarized, and comparisons of predicted and measured particle deposition are presented. Applications of the computer program for spray pattern improvement are illustrated.
NASA Astrophysics Data System (ADS)
Weiß-Borkowski, Nathalie; Lian, Junhe; Camberg, Alan; Tröster, Thomas; Münstermann, Sebastian; Bleck, Wolfgang; Gese, Helmut; Richter, Helmut
2018-05-01
Determination of forming limit curves (FLC) to describe the multi-axial forming behaviour is possible via either experimental measurements or theoretical calculations. In case of theoretical determination, different models are available and some of them consider the influence of strain rate in the quasi-static and dynamic strain rate regime. Consideration of the strain rate effect is necessary as many material characteristics such as yield strength and failure strain are affected by loading speed. In addition, the start of instability and necking depends not only on the strain hardening coefficient but also on the strain rate sensitivity parameter. Therefore, the strain rate dependency of materials for both plasticity and the failure behaviour is taken into account in crash simulations for strain rates up to 1000 s-1 and FLC can be used for the description of the material's instability behaviour at multi-axial loading. In this context, due to the strain rate dependency of the material behaviour, an extrapolation of the quasi-static FLC to dynamic loading condition is not reliable. Therefore, experimental high-speed Nakajima tests or theoretical models shall be used to determine the FLC at high strain rates. In this study, two theoretical models for determination of FLC at high strain rates and results of experimental high-speed Nakajima tests for a DP600 are presented. One of the theoretical models is the numerical algorithm CRACH as part of the modular material and failure model MF GenYld+CrachFEM 4.2, which is based on an initial imperfection. Furthermore, the extended modified maximum force criterion considering the strain rate effect is also used to predict the FLC. These two models are calibrated by the quasi-static and dynamic uniaxial tensile tests and bulge tests. The predictions for the quasi-static and dynamic FLC by both models are presented and compared with the experimental results.
Analysis of the Cape Cod tracer data
Ezzedine, Souheil; Rubin, Yoram
1997-01-01
An analysis of the Cape Cod test was performed using several first- and higher-order theoretical models. We compare conditional and unconditional solutions of the transport equation and employ them for analysis of the experimental data. We consider spatial moments, mass breakthrough curves, and the distribution of the solute mass in space. The concentration measurements were also analyzed using theoretical models for the expected value and variance of concentration. The theoretical models we employed are based on the spatial correlation structure of the conductivity field, without any fitting of parameters to the tracer data, and hence we can test the predictive power of the theories tested. The effects of recharge on macrodispersion are investigated, and it is shown that recharge provides a reasonable explanation for the enhanced lateral spread of the Cape Cod plume. The compendium of the experimental results presented here is useful for testing of theoretical and numerical models.
NASA Astrophysics Data System (ADS)
Chen, Xianfeng; Lin, Zhongqin; Yu, Zhongqi; Chen, Xinping; Li, Shuhui
2011-08-01
This study establishes the forming limit diagram (FLD) for QSTE340 seamed tube hydroforming by finite element method (FEM) simulation. FLD is commonly obtained from experiment, theoretical calculation and FEM simulation. But for tube hydroforming, both of the experimental and theoretical means are restricted in the application due to the equipment costs and the lack of authoritative theoretical knowledge. In this paper, a novel approach of predicting forming limit using thickness gradient criterion (TGC) is presented for seamed tube hydroforming. Firstly, tube bulge tests and uniaxial tensile tests are performed to obtain the stress-strain curve for tube three parts. Then one FE model for a classical tube free hydroforming and another FE model for a novel experimental apparatus by applying the lateral compression force and the internal pressure are constructed. After that, the forming limit strain is calculated based on TGC in the FEM simulation. Good agreement between the simulation and experimental results is indicated. By combining the TGC and FEM, an alternative way of predicting forming limit with enough accuracy and convenience is provided.
Modeling sand wave characteristics on the Belgian Continental Shelf and in the Calais-Dover Strait
NASA Astrophysics Data System (ADS)
Cherlet, J.; Besio, G.; Blondeaux, P.; van Lancker, V.; Verfaillie, E.; Vittori, G.
2007-06-01
The capability of the model of Besio et al. (2006) to predict the main geometrical characteristics (crest orientation, wavelength,…) of tidal sand waves is tested by comparing the theoretical predictions with field data. In particular the field observations carried out by Mouchet (1990) and Van Lancker et al. (2005) along the continental shelf of Belgium are used. Additional comparisons are carried out against the field measurements described by Le Bot (2001) and Le Bot and Trenteseaux (2004) which were carried out in an adjacent region. Attention is focused on the prediction of the wavelength of the bottom forms. Indeed, the capability of a linear stability analysis to predict the occurrence of sand waves has been already tested by Hulscher and van den Brink (2001) and more recently by van der Veen et al. (2006). The obtained results show that the theoretical predictions fairly agree with field observations even though some of the comparisons suggest that the accuracy of the predictions depends on the accurate evaluation of the local current and sediment characteristics.
Schuwirth, Nele; Reichert, Peter
2013-02-01
For the first time, we combine concepts of theoretical food web modeling, the metabolic theory of ecology, and ecological stoichiometry with the use of functional trait databases to predict the coexistence of invertebrate taxa in streams. We developed a mechanistic model that describes growth, death, and respiration of different taxa dependent on various environmental influence factors to estimate survival or extinction. Parameter and input uncertainty is propagated to model results. Such a model is needed to test our current quantitative understanding of ecosystem structure and function and to predict effects of anthropogenic impacts and restoration efforts. The model was tested using macroinvertebrate monitoring data from a catchment of the Swiss Plateau. Even without fitting model parameters, the model is able to represent key patterns of the coexistence structure of invertebrates at sites varying in external conditions (litter input, shading, water quality). This confirms the suitability of the model concept. More comprehensive testing and resulting model adaptations will further increase the predictive accuracy of the model.
Preliminary dynamic tests of a flight-type ejector
NASA Technical Reports Server (NTRS)
Drummond, Colin K.
1992-01-01
A thrust augmenting ejector was tested to provide experimental data to assist in the assessment of theoretical models to predict duct and ejector fluid-dynamic characteristics. Eleven full-scale thrust augmenting ejector tests were conducted in which a rapid increase in the ejector nozzle pressure ratio was effected through a unique bypass/burst-disk subsystem. The present work examines two cases representative of the test performance window. In the first case, the primary nozzle pressure ration (NPR) increased 36 percent from one unchoked (NPR = 1.29) primary flow condition to another (NPR = 1.75) over a 0.15 second interval. The second case involves choked primary flow conditions, where a 17 percent increase in primary nozzle flowrate (from NPR = 2.35 to NPR = 2.77) occurred over approximately 0.1 seconds. Transient signal treatment of the present dataset is discussed and initial interpretations of the results are compared with theoretical predictions for a similar STOVL ejector model.
A theoretical and experimental technique to measure fracture properties in viscoelastic solids
NASA Astrophysics Data System (ADS)
Freitas, Felipe Araujo Colares De
Prediction of crack growth in engineering structures is necessary for better analysis and design. However, this prediction becomes quite complex for certain materials in which the fracture behavior is both rate and path dependent. Asphaltic materials used in pavements have that intrinsic complexity in their behavior. A lot of research effort has been devoted to better understanding viscoelastic behavior and fracture in such materials. This dissertation presents a further refinement of an experimental test setup, which is significantly different from standard testing protocols, to measure viscoelastic and fracture properties of nonlinear viscoelastic solids, such as asphaltic materials. The results presented herein are primarily for experiments with asphalt, but the test procedure can be used for other viscoelastic materials as well. Even though the test is designed as a fracture test, experiments on the investigated materials have uncovered very complex phenomena prior to fracture. Viscoelasticity and micromechanics are used to explain some of the physical phenomena observed in the tests. The material behavior prior to fracture includes both viscoelastic behavior and a necking effect, which is further discussed in the appendix of the present study. The dissertation outlines a theoretical model for the prediction of tractions ahead of the crack tip. The major contribution herein lies in the development of the experimental procedure for evaluating the material parameters necessary for deploying the model in the prediction of ductile crack growth. Finally, predictions of crack growth in a double cantilever beam specimens and asphalt concrete samples are presented in order to demonstrate the power of this approach for predicting crack growth in viscoelastic media.
ERIC Educational Resources Information Center
Taylor, Peter James; Gooding, Patricia A.; Wood, Alex M.; Johnson, Judith; Tarrier, Nicholas
2011-01-01
Theoretical perspectives into suicidality have suggested that heightened perceptions of defeat and entrapment lead to suicidality. However, all previous empirical work has been cross-sectional. We provide the first longitudinal test of the theoretical predictions, in a sample of 79 students who reported suicidality. Participants completed…
Comparisons Between Experimental and Semi-theoretical Cutting Forces of CCS Disc Cutters
NASA Astrophysics Data System (ADS)
Xia, Yimin; Guo, Ben; Tan, Qing; Zhang, Xuhui; Lan, Hao; Ji, Zhiyong
2018-05-01
This paper focuses on comparisons between the experimental and semi-theoretical forces of CCS disc cutters acting on different rocks. The experimental forces obtained from LCM tests were used to evaluate the prediction accuracy of a semi-theoretical CSM model. The results show that the CSM model reliably predicts the normal forces acting on red sandstone and granite, but underestimates the normal forces acting on marble. Some additional LCM test data from the literature were collected to further explore the ability of the CSM model to predict the normal forces acting on rocks of different strengths. The CSM model underestimates the normal forces acting on soft rocks, semi-hard rocks and hard rocks by approximately 38, 38 and 10%, respectively, but very accurately predicts those acting on very hard and extremely hard rocks. A calibration factor is introduced to modify the normal forces estimated by the CSM model. The overall trend of the calibration factor is characterized by an exponential decrease with increasing rock uniaxial compressive strength. The mean fitting ratios between the normal forces estimated by the modified CSM model and the experimental normal forces acting on soft rocks, semi-hard rocks and hard rocks are 1.076, 0.879 and 1.013, respectively. The results indicate that the prediction accuracy and the reliability of the CSM model have been improved.
Redundancy and Reduction: Speakers Manage Syntactic Information Density
ERIC Educational Resources Information Center
Jaeger, T. Florian
2010-01-01
A principle of efficient language production based on information theoretic considerations is proposed: Uniform Information Density predicts that language production is affected by a preference to distribute information uniformly across the linguistic signal. This prediction is tested against data from syntactic reduction. A single multilevel…
Comparison of theoretical and flight-measured local flow aerodynamics for a low-aspect-ratio fin
NASA Technical Reports Server (NTRS)
Johnson, J. B.; Sandlin, D. R.
1984-01-01
Flight test and theoretical aerodynamic data were obtained for a flight test fixture mounted on the underside of an F-104G aircraft. The theoretical data were generated using two codes, a two dimensional transonic code called Code H, and a three dimensional subsonic and supersonic code call wing-body. Pressure distributions generated by the codes for the flight test fixture as well as boundary layer displacement thickness generated by the two dimensional code were compared to the flight test data. The two dimensional code pressure distributions compared well except at the minimum pressure point and trailing edge. Shock locations compared well except at high transonic speeds. The three dimensional code pressure distributions compared well except at the trailing edge of the flight test fixture. The two dimensional code does not predict displacement thickness of the flight test fixture well.
An experimental and theoretical analysis of a foil-air bearing rotor system
NASA Astrophysics Data System (ADS)
Bonello, P.; Hassan, M. F. Bin
2018-01-01
Although there is considerable research on the experimental testing of foil-air bearing (FAB) rotor systems, only a small fraction has been correlated with simulations from a full nonlinear model that links the rotor, air film and foil domains, due to modelling complexity and computational burden. An approach for the simultaneous solution of the three domains as a coupled dynamical system, introduced by the first author and adopted by independent researchers, has recently demonstrated its capability to address this problem. This paper uses this approach, with further developments, in an experimental and theoretical study of a FAB-rotor test rig. The test rig is described in detail, including issues with its commissioning. The theoretical analysis uses a recently introduced modal-based bump foil model that accounts for interaction between the bumps and their inertia. The imposition of pressure constraints on the air film is found to delay the predicted onset of instability speed. The results lend experimental validation to a recent theoretically-based claim that the Gümbel condition may not be appropriate for a practical single-pad FAB. The satisfactory prediction of the salient features of the measured nonlinear behavior shows that the air film is indeed highly influential on the response, in contrast to an earlier finding.
Improve SSME power balance model
NASA Technical Reports Server (NTRS)
Karr, Gerald R.
1992-01-01
Effort was dedicated to development and testing of a formal strategy for reconciling uncertain test data with physically limited computational prediction. Specific weaknesses in the logical structure of the current Power Balance Model (PBM) version are described with emphasis given to the main routing subroutines BAL and DATRED. Selected results from a variational analysis of PBM predictions are compared to Technology Test Bed (TTB) variational study results to assess PBM predictive capability. The motivation for systematic integration of uncertain test data with computational predictions based on limited physical models is provided. The theoretical foundation for the reconciliation strategy developed in this effort is presented, and results of a reconciliation analysis of the Space Shuttle Main Engine (SSME) high pressure fuel side turbopump subsystem are examined.
ERIC Educational Resources Information Center
Johnsrud, Linda K.; Sagaria, Mary Ann D.
Internal labor market theory is extended to identify market domains that influence administrative staffing decisions, and a theoretical predictive model about the role of market domains in decisions to promote or hire is proposed and tested. Information is presented as follows: theoretical framework; labor markets within higher education; and the…
ERIC Educational Resources Information Center
McClure, Timothy E.; May, David C.
2008-01-01
To test and compare theoretical explanations of the use of corporal punishment in school, the authors examine how well county-level measures of culture, socioeconomic strain, and social capital predict the prevalence and incidence of corporal punishment in Kentucky schools. Although several variables are significantly correlated with corporal…
A theoretical/experimental program to develop active optical pollution sensors
NASA Technical Reports Server (NTRS)
Mills, F. S.; Blais, R. N.; Kindle, E. C.
1977-01-01
Light detection and ranging (LIDAR) technology was applied to the assessment of air quality, and its usefulness was evaluated by actual field tests. Necessary hardware was successfully constructed and operated in the field. Measurements of necessary physical parameters, such as SO2 absorption coefficients were successfully completed and theoretical predictions of differential absorption performance were reported. Plume modeling improvements were proposed. A full scale field test of equipment, data analysis and auxiliary data support was conducted in Maryland during September 1976.
Acoustic results of the Boeing model 360 whirl tower test
NASA Astrophysics Data System (ADS)
Watts, Michael E.; Jordan, David
1990-09-01
An evaluation is presented for whirl tower test results of the Model 360 helicopter's advanced, high-performance four-bladed composite rotor system intended to facilitate over-200-knot flight. During these performance measurements, acoustic data were acquired by seven microphones. A comparison of whirl-tower tests with theory indicate that theoretical prediction accuracies vary with both microphone position and the inclusion of ground reflection. Prediction errors varied from 0 to 40 percent of the measured signal-to-peak amplitude.
NASA Technical Reports Server (NTRS)
Childs, D. W.; Scharrer, J. K.
1987-01-01
An experimental test facility is used to measure the leakage and rotordynamic coefficients of teeth-on-rotor and teeth-on-stator labyrinth gas seals. The test results are presented along with the theoretically predicted values for the two seal configurations at three different radial clearances and shaft speeds to 16,000 cpm. The test results show that the theory accurately predicts the cross-coupled stiffness for both seal configurations and shows improvement in the prediction of the direct damping for the teeth-on-rotor seal. The theory fails to predict a decrease in the direct damping coefficient for an increase in the radial clearance for the teeth-on-stator seal.
A framework for the design and development of physical employment tests and standards.
Payne, W; Harvey, J
2010-07-01
Because operational tasks in the uniformed services (military, police, fire and emergency services) are physically demanding and incur the risk of injury, employment policy in these services is usually competency based and predicated on objective physical employment standards (PESs) based on physical employment tests (PETs). In this paper, a comprehensive framework for the design of PETs and PESs is presented. Three broad approaches to physical employment testing are described and compared: generic predictive testing; task-related predictive testing; task simulation testing. Techniques for the selection of a set of tests with good coverage of job requirements, including job task analysis, physical demands analysis and correlation analysis, are discussed. Regarding individual PETs, theoretical considerations including measurability, discriminating power, reliability and validity, and practical considerations, including development of protocols, resource requirements, administrative issues and safety, are considered. With regard to the setting of PESs, criterion referencing and norm referencing are discussed. STATEMENT OF RELEVANCE: This paper presents an integrated and coherent framework for the development of PESs and hence provides a much needed theoretically based but practically oriented guide for organisations seeking to establish valid and defensible PESs.
NASA Technical Reports Server (NTRS)
Ku, Jen-Tung; Hoang, Triem T.
1998-01-01
The heat transport capability of a capillary pumped loop (CPL) is limited by the pressure drop that its evaporator wick can sustain. The pressure drop in a CPL is not constant even under seemingly steady operation, but rather exhibits an oscillatory behavior. A hydrodynamic theory based on a mass-spring-dashpot model was previously developed to predict the pressure oscillation in a CPL with a single evaporator and a single condenser. The theory states that the pressure oscillation is a function of physical dimensions of the CPL components and operating conditions. Experimental data agreed very well with theoretical predictions. The hydrodynamic stability theory has recently been extended to predict the pressure oscillations in CPLs with multiple evaporators and multiple condensers. Concurrently, an experimental study was conducted to verify the theory and to investigate the effects of various parameters on the pressure oscillation. Four evaporators with different wick properties were tested using a test loop containing two condenser plates. The test loop allowed the four evaporators to be tested in a single-pump, two-pump or four-pump configuration, and the two condenser plates to be plumbed either in parallel or in series. Test conditions included varying the power input, the reservoir set point temperature, the condenser sink temperature, and the flow resistance between the reservoir and the loop. Experimental results agreed well with theoretical predictions.
Lattice Calculations and the Muon Anomalous Magnetic Moment
NASA Astrophysics Data System (ADS)
Marinković, Marina Krstić
2017-07-01
Anomalous magnetic moment of the muon, a_{μ }=(g_{μ }-2)/2, is one of the most precisely measured quantities in particle physics and it provides a stringent test of the Standard Model. The planned improvements of the experimental precision at Fermilab and at J-PARC propel further reduction of the theoretical uncertainty of a_{μ }. The hope is that the efforts on both sides will help resolve the current discrepancy between the experimental measurement of a_{μ } and its theoretical prediction, and potentially gain insight into new physics. The dominant sources of the uncertainty in the theoretical prediction of a_{μ } are the errors of the hadronic contributions. I will discuss recent progress on determination of hadronic contributions to a_{μ } from lattice calculations.
Bouffard, Jeffrey A
2007-08-01
Previous hypothetical scenario tests of rational choice theory have presented all participants with the same set of consequences, implicitly assuming that these consequences would be relevant for each individual. Recent research demonstrates that those researcher-presented consequences do not accurately reflect those considered by study participants and that there is individual variation in the relevance of various consequences. Despite this and some theoretical propositions that such differences should exist, little empirical research has explored the possibility of predicting such variation. This study allows participants to develop their own set of relevant consequences for three hypothetical offenses and examines how several demographic and theoretical variables impact those consequences' relevance. Exploratory results suggest individual factors impact the perceived relevance of several cost and benefit types, even among a relatively homogenous sample of college students. Implications for future tests of rational choice theory, as well as policy implications are discussed.
1981-10-01
Numerical predictions used in the compari- sons were obtained from the energy -based, finite-difference computer proqram CLAPP. Test specimens were clamped...edges V LONGITUDINAL STIFFENERS 45 I. Introduction 45 2. Stiffener Strain Energy 46 3. Stiffener Energy in Matrix Form 47 4. Displacement Continuity 49...that theoretical bifurcation loads predicted by the energy method represent upper bounds to the classical bifurcation loads associated with the test
1987-10-01
durability test at 800 C, 95% r.h. 71 SEM photomicrograph at 1600 x of E-8385 film spun coat . from a 2 wt% solution onto a ferrotype plate. .I 72 Theoretical ...TiO2 to the high energy side. While Auger line shapes theoretically yield oxidation state information, stoichiometry conclusions from experi- 0 mental...the justification for the methods chosen in this work. ,*p-* ., Fadley et al. [37] present a detailed theoretical discussion on quantitative XPS
Theoretical models of helicopter rotor noise
NASA Technical Reports Server (NTRS)
Hawkings, D. L.
1978-01-01
For low speed rotors, it is shown that unsteady load models are only partially successful in predicting experimental levels. A theoretical model is presented which leads to the concept of unsteady thickness noise. This gives better agreement with test results. For high speed rotors, it is argued that present models are incomplete and that other mechanisms are at work. Some possibilities are briefly discussed.
NACA Transonic Wind-tunnel Test Sections
NASA Technical Reports Server (NTRS)
Wright, Ray H; Ward, Vernon G
1955-01-01
Report presents an approximate subsonic theory for the solid-blockage interference in circular wind tunnels with walls slotted in the direction of flow. This theory indicated the possibility of obtaining zero blockage interference. Tests in a circular slotted tunnel based on the theory confirmed the theoretical predictions.
Müller, Sean; Vallence, Ann-Maree; Winstein, Carolee
2017-12-14
A framework is presented of how theoretical predictions can be tested across the expert athlete to disabled patient skill continuum. Common-coding theory is used as the exemplar to discuss sensory and motor system contributions to perceptual-motor behavior. Behavioral and neural studies investigating expert athletes and patients recovering from cerebral stroke are reviewed. They provide evidence of bi-directional contributions of visual and motor systems to perceptual-motor behavior. Majority of this research is focused on perceptual-motor performance or learning, with less on transfer. The field is ripe for research designed to test theoretical predictions across the expert athlete to disabled patient skill continuum. Our view has implications for theory and practice in sports science, physical education, and rehabilitation.
NASA Technical Reports Server (NTRS)
Bihrle, W., Jr.
1976-01-01
A correlation study was conducted to determine the ability of current analytical spin prediction techniques to predict the flight motions of a current fighter airplane configuration during the spin entry, the developed spin, and the spin recovery motions. The airplane math model used aerodynamics measured on an exact replica of the flight test model using conventional static and forced-oscillation wind-tunnel test techniques and a recently developed rotation-balance test apparatus capable of measuring aerodynamics under steady spinning conditions. An attempt was made to predict the flight motions measured during stall/spin flight testing of an unpowered, radio-controlled model designed to be a 1/10 scale, dynamically-scaled model of a current fighter configuration. Comparison of the predicted and measured flight motions show that while the post-stall and spin entry motions were not well-predicted, the developed spinning motion (a steady flat spin) and the initial phases of the spin recovery motion are reasonably well predicted.
Nuclear Reactions in Micro/Nano-Scale Metal Particles
NASA Astrophysics Data System (ADS)
Kim, Y. E.
2013-03-01
Low-energy nuclear reactions in micro/nano-scale metal particles are described based on the theory of Bose-Einstein condensation nuclear fusion (BECNF). The BECNF theory is based on a single basic assumption capable of explaining the observed LENR phenomena; deuterons in metals undergo Bose-Einstein condensation. The BECNF theory is also a quantitative predictive physical theory. Experimental tests of the basic assumption and theoretical predictions are proposed. Potential application to energy generation by ignition at low temperatures is described. Generalized theory of BECNF is used to carry out theoretical analyses of recently reported experimental results for hydrogen-nickel system.
ERIC Educational Resources Information Center
Fü rst, Guillaume; Ghisletta, Paolo; Lubart, Todd
2016-01-01
The present work proposes an integrative model of creativity that includes personality traits and cognitive processes. This model hypothesizes that three high-order personality factors predict two main process factors, which in turn predict intensity and achievement of creative activities. The personality factors are: "Plasticity" (high…
Nonlinear Dynamics: Theoretical Perspectives and Application to Suicidology
ERIC Educational Resources Information Center
Schiepek, Gunter; Fartacek, Clemens; Sturm, Josef; Kralovec, Karl; Fartacek, Reinhold; Ploderl, Martin
2011-01-01
Despite decades of research, the prediction of suicidal behavior remains limited. As a result, searching for more specific risk factors and testing their predictive power are central in suicidology. This strategy may be of limited value because it assumes linearity to the suicidal process that is most likely nonlinear by nature and which can be…
Predicting fire spread in Arizona's oak chaparral
A. W. Lindenmuth; James R. Davis
1973-01-01
Five existing fire models, both experimental and theoretical, did not adequately predict rate-of-spread (ROS) when tested on single- and multiclump fires in oak chaparral in Arizona. A statistical model developed using essentially the same input variables but weighted differently accounted for 81 percent ofthe variation in ROS. A chemical coefficient that accounts for...
ERIC Educational Resources Information Center
Dworkin, Rosalind J.; Poindexter, Alfred N.
1980-01-01
Reviews literature on teenage abortion seekers. Suggests and tests a theoretical model designed to predict whether a low-income pregnant teenager will decide to abort or to deliver her baby. Concludes that age and socioemotional variables are the strongest predictive elements in the model. (GC)
NASA Technical Reports Server (NTRS)
Mcgrath, W. R.; Richards, P. L.; Face, D. W.; Prober, D. E.; Lloyd, F. L.
1988-01-01
A systematic study of the gain and noise in superconductor-insulator-superconductor mixers employing Ta based, Nb based, and Pb-alloy based tunnel junctions was made. These junctions displayed both weak and strong quantum effects at a signal frequency of 33 GHz. The effects of energy gap sharpness and subgap current were investigated and are quantitatively related to mixer performance. Detailed comparisons are made of the mixing results with the predictions of a three-port model approximation to the Tucker theory. Mixer performance was measured with a novel test apparatus which is accurate enough to allow for the first quantitative tests of theoretical noise predictions. It is found that the three-port model of the Tucker theory underestimates the mixer noise temperature by a factor of about 2 for all of the mixers. In addition, predicted values of available mixer gain are in reasonable agreement with experiment when quantum effects are weak. However, as quantum effects become strong, the predicted available gain diverges to infinity, which is in sharp contrast to the experimental results. Predictions of coupled gain do not always show such divergences.
The CaCl2 transition in Stishovite
NASA Astrophysics Data System (ADS)
Cohen, R. E.
2001-12-01
Rutile-structured SiO2, or stishovite, has been the subject of intense theoretical study for the development and testing of theoretical methods.1 The pressure induced phase transition of stishovite to the CaCl2 structure is one of the few cases of phase transitions predicted from first-principles electronic structure theory before being proven experimentally. Such tests are important, because one does not know to what level to trust theoretical predictions unless there are test predictions that are fulfilled. There were some indications of a phase transition from earlier ionic model calculations,3 but confidence in the predicted pressure was low because the model was not sufficiently accurate for the equation of state. Then, Linearized Augmented Plane Wave (LAPW) calculations, which make no assumptions abouyt ionicity, were performed for SiO2, and clearly showed an elastic instability at about 45 GPa.2 Non-hydrostatic experiments showed evidence for a transition, but at about 100 GPa.4 Raman experiments showed softening of the B1g Raman mode frequency, which, if extrapolated, would vanish at about 100 GPa.5 Theory predicted an transition, where the elastic anomaly c11-c12=0, at which point the Raman mode would begin to increase in frequency. A hydrostatic single crystal Raman experiment was done to higher pressures, and the transition was found at about 45-50 GPa, and the Raman spectra were in good agreement with the theoretical predictions.5 Single crystal hydrostatic x-ray studies have verified the transition, and showed that the transition is weakly first-order, with some hysteresis.7 Progress in theoretical studies of stishovite and the transition will be reviewed. 1 Cohen, R. E. In: Silica: Physical Behavior, Geochemistry, and Materials Applications. P. Heaney, C. T. Prewitt and G. V. Gibbs. Washington, D.C., Mineralogical Society of America. 29: 369-402, 1994. 2 Cohen, R. E., In: High Pressure Research in Mineral Physics: Application to Earth and Planetary Science. M. H. Manghnani and Y. Syono. Washington, D.C., AGU: 425-432, 1992. 3 Cohen, R. E. Geophys. Res. Lett. 14: 37-40, 1987. 4 Tsuchida, Y. and T. Yagi, Nature 340: 217-220, 1989. 5 Hemley, R. J., In: High-Pressure Research in Mineral Physics. M. H. Manghnani and Y. Syono. Tokyo, Terra Scientific: 347-359, 1987. 6 Kingma, K. J., R. E. Cohen, R. J. Hemley and H. K. Mao, Nature 374: 243-245, 1995. 7 Hemley, R. J., J. Shu, M. A. Carpenter, J. Hu, H. K. Mao and K. J. Kingma, Solid State Comm. 114: 527-532, 2000.
The importance of normative beliefs to the self-prophecy effect.
Sprott, David E; Spangenberg, Eric R; Fisher, Robert
2003-06-01
Asking people to predict whether they will undertake a target behavior increases their probability of performing that behavior. Now referred to as the self-prophecy effect, this phenomenon has been demonstrated across several contexts. Although theoretical explanations for the effect have been offered, empirical evidence for proposed accounts is sparse. The current research tests the theoretically relevant precondition for the effect that normative beliefs--evaluations of what is socially desirable or appropriate--underlie manifestation of the self-prophecy effect. Results of 2 experiments for different behaviors indicate that the act of making a prediction is most effective when normative beliefs are strong. Implications of these findings are discussed in relation to theoretical explanations for the effect and successful use of self-prophecy to promote socially desirable behaviors.
Users' manual for the Langley high speed propeller noise prediction program (DFP-ATP)
NASA Technical Reports Server (NTRS)
Dunn, M. H.; Tarkenton, G. M.
1989-01-01
The use of the Dunn-Farassat-Padula Advanced Technology Propeller (DFP-ATP) noise prediction program which computes the periodic acoustic pressure signature and spectrum generated by propellers moving with supersonic helical tip speeds is described. The program has the capacity of predicting noise produced by a single-rotation propeller (SRP) or a counter-rotation propeller (CRP) system with steady or unsteady blade loading. The computational method is based on two theoretical formulations developed by Farassat. One formulation is appropriate for subsonic sources, and the other for transonic or supersonic sources. Detailed descriptions of user input, program output, and two test cases are presented, as well as brief discussions of the theoretical formulations and computational algorithms employed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Shi, Pengpeng; Zheng, Xiaojing, E-mail: xjzheng@xidian.edu.cn; Jin, Ke
2016-04-14
Weak magnetic nondestructive testing (e.g., metal magnetic memory method) concerns the magnetization variation of ferromagnetic materials due to its applied load and a weak magnetic surrounding them. One key issue on these nondestructive technologies is the magnetomechanical effect for quantitative evaluation of magnetization state from stress–strain condition. A representative phenomenological model has been proposed to explain the magnetomechanical effect by Jiles in 1995. However, the Jiles' model has some deficiencies in quantification, for instance, there is a visible difference between theoretical prediction and experimental measurements on stress–magnetization curve, especially in the compression case. Based on the thermodynamic relations and themore » approach law of irreversible magnetization, a nonlinear coupled model is proposed to improve the quantitative evaluation of the magnetomechanical effect. Excellent agreement has been achieved between the predictions from the present model and previous experimental results. In comparison with Jiles' model, the prediction accuracy is improved greatly by the present model, particularly for the compression case. A detailed study has also been performed to reveal the effects of initial magnetization status, cyclic loading, and demagnetization factor on the magnetomechanical effect. Our theoretical model reveals that the stable weak magnetic signals of nondestructive testing after multiple cyclic loads are attributed to the first few cycles eliminating most of the irreversible magnetization. Remarkably, the existence of demagnetization field can weaken magnetomechanical effect, therefore, significantly reduces the testing capability. This theoretical model can be adopted to quantitatively analyze magnetic memory signals, and then can be applied in weak magnetic nondestructive testing.« less
Accurate Theoretical Predictions of the Properties of Energetic Materials
2008-09-18
decomposition, Monte Carlo, molecular dynamics, supercritical fluids, solvation and separation, quantum Monte Carlo, potential energy surfaces, RDX , TNAZ...labs, who are contributing to the theoretical efforts, providing data for testing of the models, or aiding in the transition of the methods, models...and results to DoD applications. The major goals of the project are: • Models that describe phase transitions and chemical reactions in
NASA Technical Reports Server (NTRS)
Childs, D. W.; Nelson, C. C.; Elrod, D.; Nicks, C.
1985-01-01
The test facility and initial test program developed to experimentally measure the fluid forces induced by annular gas seals is described. A comparison of theoretically predicted and experimentally obtained data for smooth and honeycomb seals is provided. And a comparison of experimental data from the tests of three smooth-rotor/smooth-stator seals is provided. The leakage of the working fluid through the seal, the pressure gradient along the seal length, entrance pressure-loss data, and rotordynamic coefficients provide a basis for comparison. A short discussion on seal theory is included, and various rotordynamic coefficient identification schemes are described.
A process dissociation approach to objective-projective test score interrelationships.
Bornstein, Robert F
2002-02-01
Even when self-report and projective measures of a given trait or motive both predict theoretically related features of behavior, scores on the 2 tests correlate modestly with each other. This article describes a process dissociation framework for personality assessment, derived from research on implicit memory and learning, which can resolve these ostensibly conflicting results. Research on interpersonal dependency is used to illustrate 3 key steps in the process dissociation approach: (a) converging behavioral predictions, (b) modest test score intercorrelations, and (c) delineation of variables that differentially affect self-report and projective test scores. Implications of the process dissociation framework for personality assessment and test development are discussed.
ERIC Educational Resources Information Center
Squires, Lauren M.
2011-01-01
This dissertation investigates the sociolinguistic perception of morphosyntactic variation and is motivated by exemplar-based approaches to grammar. The study uses syntactic priming experiments to test the effects of participants' exposure to subject-verb agreement variants. Experiments also manipulate the gender, social status, and individual…
Usa, Hideyuki; Matsumura, Masashi; Ichikawa, Kazuna; Takei, Hitoshi
2017-01-01
This study attempted to develop a formula for predicting maximum muscle strength value for young, middle-aged, and elderly adults using theoretical Grade 3 muscle strength value (moment fair: M f )-the static muscular moment to support a limb segment against gravity-from the manual muscle test by Daniels et al. A total of 130 healthy Japanese individuals divided by age group performed isometric muscle contractions at maximum effort for various movements of hip joint flexion and extension and knee joint flexion and extension, and the accompanying resisting force was measured and maximum muscle strength value (moment max, M m ) was calculated. Body weight and limb segment length (thigh and lower leg length) were measured, and M f was calculated using anthropometric measures and theoretical calculation. There was a linear correlation between M f and M m in each of the four movement types in all groups, excepting knee flexion in elderly. However, the formula for predicting maximum muscle strength was not sufficiently compatible in middle-aged and elderly adults, suggesting that the formula obtained in this study is applicable in young adults only.
Matsumura, Masashi; Ichikawa, Kazuna; Takei, Hitoshi
2017-01-01
This study attempted to develop a formula for predicting maximum muscle strength value for young, middle-aged, and elderly adults using theoretical Grade 3 muscle strength value (moment fair: Mf)—the static muscular moment to support a limb segment against gravity—from the manual muscle test by Daniels et al. A total of 130 healthy Japanese individuals divided by age group performed isometric muscle contractions at maximum effort for various movements of hip joint flexion and extension and knee joint flexion and extension, and the accompanying resisting force was measured and maximum muscle strength value (moment max, Mm) was calculated. Body weight and limb segment length (thigh and lower leg length) were measured, and Mf was calculated using anthropometric measures and theoretical calculation. There was a linear correlation between Mf and Mm in each of the four movement types in all groups, excepting knee flexion in elderly. However, the formula for predicting maximum muscle strength was not sufficiently compatible in middle-aged and elderly adults, suggesting that the formula obtained in this study is applicable in young adults only. PMID:28133549
Statistical Anomalies of Bitflips in SRAMs to Discriminate SBUs From MCUs
NASA Astrophysics Data System (ADS)
Clemente, Juan Antonio; Franco, Francisco J.; Villa, Francesca; Baylac, Maud; Rey, Solenne; Mecha, Hortensia; Agapito, Juan A.; Puchner, Helmut; Hubert, Guillaume; Velazco, Raoul
2016-08-01
Recently, the occurrence of multiple events in static tests has been investigated by checking the statistical distribution of the difference between the addresses of the words containing bitflips. That method has been successfully applied to Field Programmable Gate Arrays (FPGAs) and the original authors indicate that it is also valid for SRAMs. This paper presents a modified methodology that is based on checking the XORed addresses with bitflips, rather than on the difference. Irradiation tests on CMOS 130 & 90 nm SRAMs with 14-MeV neutrons have been performed to validate this methodology. Results in high-altitude environments are also presented and cross-checked with theoretical predictions. In addition, this methodology has also been used to detect modifications in the organization of said memories. Theoretical predictions have been validated with actual data provided by the manufacturer.
Comparison of theoretical and observed pressure profiles in geothermal wells
DOE Office of Scientific and Technical Information (OSTI.GOV)
Marquez M, R.
Two-phase water-steam flow conditions in geothermal wells are studied aimed at predicting pressure drops in these wells. Five prediction methods were selected to be analyzed and compared with each other and with actual pressure measurements. These five correlations were tested on five wells: three in New Zealand, one in Mexico, and one in the Philippines.
ERIC Educational Resources Information Center
Bolkan, San; Goodboy, Alan K.
2016-01-01
Protection motivation theory (PMT) explains people's adaptive behavior in response to personal threats. In this study, PMT was used to predict rhetorical dissent episodes related to 210 student reports of perceived classroom problems. In line with theoretical predictions, a moderated moderation analysis revealed that students were likely to voice…
Review of sonic fatigue technology
NASA Technical Reports Server (NTRS)
Clarkson, B. L.
1994-01-01
From the early-1960s until the mid-1980s, there was very little theoretical development for sonic fatigue prediction. Design nomographs based on simple theoretical models and results of specially designed tests were developed for most common aircraft structures. The use of advanced composites in the 1980s, however, generated an increased interest in development of more sophisticated theoretical models because of the possibilities for a much wider range of structural designs. The purpose of this report is to review sonic fatigue technology and, in particular, to assess recent developments. It also suggests a plan for a coordinated program of theoretical and experimental work to meet the anticipated needs of future aerospace vehicles.
Plotnikoff, Ronald C; Lubans, David R; Penfold, Chris M; Courneya, Kerry S
2014-05-01
Theory-based interventions to promote physical activity (PA) are more effective than atheoretical approaches; however, the comparative utility of theoretical models is rarely tested in longitudinal designs with multiple time points. Further, there is limited research that has simultaneously tested social-cognitive models with self-report and objective PA measures. The primary aim of this study was to test the predictive ability of three theoretical models (social cognitive theory, theory of planned behaviour, and protection motivation theory) in explaining PA behaviour. Participants were adults with type 2 diabetes (n = 287, 53.8% males, mean age = 61.6 ± 11.8 years). Theoretical constructs across the three theories were tested to prospectively predict PA behaviour (objective and self-report) across three 6-month time intervals (baseline-6, 6-12, 12-18 months) using structural equation modelling. PA outcomes were steps/3 days (objective) and minutes of MET-weighted PA/week (self-report). The mean proportion of variance in PA explained by these models was 6.5% for objective PA and 8.8% for self-report PA. Direct pathways to PA outcomes were stronger for self-report compared with objective PA. These theories explained a small proportion of the variance in longitudinal PA studies. Theory development to guide interventions for increasing and maintaining PA in adults with type 2 diabetes requires further research with objective measures. Theory integration across social-cognitive models and the inclusion of ecological levels are recommended to further explain PA behaviour change in this population. Statement of contribution What is already known on this subject? Social-cognitive theories are able to explain partial variance for physical activity (PA) behaviour. What does this study add? The testing of three theories in a longitudinal design over 3, 6-month time intervals. The parallel use and comparison of both objective and self-report PA measures in testing these theories. © 2013 The British Psychological Society.
Keegan, Conor; Conroy, Ronán; Doyle, Frank
2016-02-01
Depression is associated with increased mortality in patients with acute coronary syndrome (ACS). However, little is known about the theoretical causes of depression trajectories post-ACS, and whether these trajectories predict subsequent morbidity/mortality. We tested a longitudinal model of depressive vulnerabilities, trajectories and mortality. A prospective observational study of 374 ACS patients was conducted. Participants completed questionnaires on theoretical vulnerabilities (interpersonal life events, reinforcing events, cognitive distortions, and Type D personality) during hospitalisation and depression at baseline and 3, 6 and 12 months post-hospitalisation. Latent class analysis determined trajectories of depression. Path analysis was used to test relationships among vulnerabilities, depression trajectories and outcomes (combination of 1-year morbidity and 7-year mortality). Vulnerabilities independently predicted persistent and subthreshold depression trajectory categories, with effect sizes significantly highest for persistent depression. Both subthreshold and persistent depression trajectories were significant predictors of morbidity/mortality (e.g. persistent depression OR=2.4, 95% CI=1.8-3.1, relative to never depressed). Causality cannot be inferred from these associations. We had no measures of history of depression or treatments, which may affect associations. Theoretical vulnerabilities predicted depression trajectories, which in turn predicted increased morbidity/mortality, demonstrating for the first time a potential longitudinal chain of events post-ACS. This longitudinal model has important practical implications as clinicians can use vulnerability measures to identify those at most risk of poor outcomes. Copyright © 2015. Published by Elsevier B.V.
Analysis of Wind Tunnel Oscillatory Data of the X-31A Aircraft
NASA Technical Reports Server (NTRS)
Smith, Mark S.
1999-01-01
Wind tunnel oscillatory tests in pitch, roll, and yaw were performed on a 19%-scale model of the X-31A aircraft. These tests were used to study the aerodynamic characteristics of the X-31A in response to harmonic oscillations at six frequencies. In-phase and out-of-phase components of the aerodynamic coefficients were obtained over a range of angles of attack from 0 to 90 deg. To account for the effect of frequency on the data, mathematical models with unsteady terms were formulated by use of two different indicial functions. Data from a reduced set of frequencies were used to estimate model parameters, including steady-state static and dynamic stability derivatives. Both models showed good prediction capability and the ability to accurately fit the measured data. Estimated static stability derivatives compared well with those obtained from static wind tunnel tests. The roll and yaw rate derivative estimates were compared with rotary-balanced wind tunnel data and theoretical predictions. The estimates and theoretical predictions were in agreement at small angles of attack. The rotary-balance data showed, in general, acceptable agreement with the steady-state derivative estimates.
NASA Technical Reports Server (NTRS)
Elrod, D. A.; Childs, D. W.
1986-01-01
A brief review of current annular seal theory and a discussion of the predicted effect on stiffness of tapering the seal stator are presented. An outline of Nelson's analytical-computational method for determining rotordynamic coefficients for annular compressible-flow seals is included. Modifications to increase the maximum rotor speed of an existing air-seal test apparatus at Texas A&M University are described. Experimental results, including leakage, entrance-loss coefficients, pressure distributions, and normalized rotordynamic coefficients, are presented for four convergent-tapered, smooth-rotor, smooth-stator seals. A comparison of the test results shows that an inlet-to-exit clearance ratio of 1.5 to 2.0 provides the maximum direct stiffness, a clearance ratio of 2.5 provides the greatest stability, and a clearance ratio of 1.0 provides the least stability. The experimental results are compared to theoretical results from Nelson's analysis with good agreement. Test results for cross-coupled stiffness show less sensitivity of fluid prerotation than predicted.
Design, Fabrication and Testing of a Crushable Energy Absorber for a Passive Earth Entry Vehicle
NASA Technical Reports Server (NTRS)
Kellas, Sotiris; Corliss, James M. (Technical Monitor)
2002-01-01
A conceptual study was performed to investigate the impact response of a crushable energy absorber for a passive Earth entry vehicle. The spherical energy-absorbing concept consisted of a foam-filled composite cellular structure capable of omni-directional impact-load attenuation as well as penetration resistance. Five composite cellular samples of hemispherical geometry were fabricated and tested dynamically with impact speeds varying from 30 to 42 meters per second. Theoretical crush load predictions were obtained with the aid of a generalized theory which accounts for the energy dissipated during the folding deformation of the cell-walls. Excellent correlation was obtained between theoretical predictions and experimental tests on characteristic cell-web intersections. Good correlation of theory with experiment was also found to exist for the more complex spherical cellular structures. All preliminary design requirements were met by the cellular structure concept, which exhibited a near-ideal sustained crush-load and approximately 90% crush stroke.
NASA Technical Reports Server (NTRS)
Grosveld, F.; Lameris, J.; Dunn, D.
1979-01-01
Experiments and a theoretical analysis were conducted to predict the noise reduction of inclined and curved panels. These predictions are compared to the experimental results with reasonable agreement between theory and experiment for panels under an oblique angle of sound incidence. Theoretical as well as experimental results indicate a big increase in noise reduction when a flat test panel is curved. Further curving the panel slightly decreases the noise reduction. Riveted flat panels are shown to give a higher noise reduction in the stiffness-controlled frequency region, while bonded panels are superior in this region when the test panel is curved. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial in-plane stresses are presented and discussed. These test results indicate an important improvement in the noise reduction of these panels in the frequency range below the fundamental panel/cavity frequency.
NASA Astrophysics Data System (ADS)
Goldfarb, E. J.; Ikeda, K.; Tisato, N.
2017-12-01
Seismic and ultrasonic velocities of rocks are function of several variables including fluid saturation and type. Understanding the effect of each variable on elastic waves can be valuable when using seismic methods for subsurface modeling. Fluid type and saturation are of specific interest to volcanology, water, and hydrocarbon exploration. Laboratory testing is often employed to understand the effects of fluids on elastic waves. However, laboratory testing is expensive and time consuming. It normally requires cutting rare samples into regular shapes. Fluid injection can also destroy specimens as removing the fluid after testing can prove difficult. Another option is theoretical modeling, which can be used to predict the effect of fluids on elastic properties, but it is often inaccurate. Alternatively, digital rock physics (DRP) can be used to investigate the effect of fluid substitution. DRP has the benefit of being non invasive, as it does not require regular sample shapes or fluid injection. Here, we compare the three methods for dry and saturated Berea sandstone to test the reliability of DRP. First, ultrasonic velocities were obtained from laboratory testing. Second, for comparison, we used a purely theoretical approach - i.e., Hashin-Shtrikman and Biot theory - to estimate the wave speeds at dry and wet conditions. Third, we used DRP. The dry sample was scanned with micro Computed Tomography (µCT), and a three dimensional (3D) array was recorded. We employed a segmentation-less method to convert each 3D array value to density, porosity, elastic moduli, and wave speeds. Wave propagation was simulated numerically at similar frequency as the laboratory. To simulate fluid substitution, we numerically substituted air values for water and repeated the simulation. The results from DRP yielded similar velocities to the laboratory, and accurately predicted the velocity change from fluid substitution. Theoretical modeling could not accurately predict velocity, and under-predicted the velocity change from fluid substitution. The mathematical approach proved to be a poor comparison for the laboratory measurement. DRP proved to be effective, and could be used in future with drill cuttings, perhaps to limit the use of expensive cores. DRP could also limit the requirement for physically testing fluid substitution.
ERIC Educational Resources Information Center
Eakman, Aaron M.; Carlson, Mike E.; Clark, Florence A.
2010-01-01
The Meaningful Activity Participation Assessment (MAPA), a recently developed 28-item tool designed to measure the meaningfulness of activity, was tested in a sample of 154 older adults. The MAPA evidenced a sufficient level of internal consistency and test-retest reliability and correlated as theoretically predicted with the Life Satisfaction…
Effect of Reynolds number variation on aerodynamics of a hydrogen-fueled transport concept at Mach 6
NASA Technical Reports Server (NTRS)
Penland, Jim A.; Marcum, Don C., Jr.
1987-01-01
Two separate tests have been made on the same blended wing-body hydrogen-fueled transport model at a Mach number of about 6 and a range of Reynolds number (based on theoretical body length) of 1.577 to 55.36 X 10 to the 6th power. The results of these tests, made in a conventional hypersonic blowdown tunnel and a hypersonic shock tunnel, are presented through a range of angle of attack from -1 to 8 deg, with an extended study at a constant angle of attack of 3 deg. The model boundary layer flow appeared to be predominately turbulent except for the low Reynolds number shock tunnel tests. Model wall temperatures varied considerably; the blowdown tunnel varied from about 255 F to 340 F, whereas the shock tunnel had a constant 70 F model wall temperature. The experimental normal-force coefficients were essentially independent of Reynolds number. A current theoretical computer program was used to study the effect of Reynolds number. Theoretical predictions of normal-force coefficients were good, particularly at anticipated cruise angles of attack, that is 2 to 5 deg. Axial-force coefficients were generally underestimated for the turbulent skin friction conditions, and pitching-moment coefficients could not be predicted reliably.
Using synthetic biology to make cells tomorrow's test tubes.
Garcia, Hernan G; Brewster, Robert C; Phillips, Rob
2016-04-18
The main tenet of physical biology is that biological phenomena can be subject to the same quantitative and predictive understanding that physics has afforded in the context of inanimate matter. However, the inherent complexity of many of these biological processes often leads to the derivation of complex theoretical descriptions containing a plethora of unknown parameters. Such complex descriptions pose a conceptual challenge to the establishment of a solid basis for predictive biology. In this article, we present various exciting examples of how synthetic biology can be used to simplify biological systems and distill these phenomena down to their essential features as a means to enable their theoretical description. Here, synthetic biology goes beyond previous efforts to engineer nature and becomes a tool to bend nature to understand it. We discuss various recent and classic experiments featuring applications of this synthetic approach to the elucidation of problems ranging from bacteriophage infection, to transcriptional regulation in bacteria and in developing embryos, to evolution. In all of these examples, synthetic biology provides the opportunity to turn cells into the equivalent of a test tube, where biological phenomena can be reconstituted and our theoretical understanding put to test with the same ease that these same phenomena can be studied in the in vitro setting.
Green, Jasmine; Liem, Gregory Arief D; Martin, Andrew J; Colmar, Susan; Marsh, Herbert W; McInerney, Dennis
2012-10-01
The study tested three theoretically/conceptually hypothesized longitudinal models of academic processes leading to academic performance. Based on a longitudinal sample of 1866 high-school students across two consecutive years of high school (Time 1 and Time 2), the model with the most superior heuristic value demonstrated: (a) academic motivation and self-concept positively predicted attitudes toward school; (b) attitudes toward school positively predicted class participation and homework completion and negatively predicted absenteeism; and (c) class participation and homework completion positively predicted test performance whilst absenteeism negatively predicted test performance. Taken together, these findings provide support for the relevance of the self-system model and, particularly, the importance of examining the dynamic relationships amongst engagement factors of the model. The study highlights implications for educational and psychological theory, measurement, and intervention. Copyright © 2012 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.
Behavioral Change Theories Can Inform the Prediction of Young Adults' Adoption of a Plant-Based Diet
ERIC Educational Resources Information Center
Wyker, Brett A.; Davison, Kirsten K.
2010-01-01
Objective: Drawing on the Theory of Planned Behavior (TPB) and the Transtheoretical Model (TTM), this study (1) examines links between stages of change for following a plant-based diet (PBD) and consuming more fruits and vegetables (FV); (2) tests an integrated theoretical model predicting intention to follow a PBD; and (3) identifies associated…
NASA LeRC's Acoustic Fill Effect Test Program and Results
NASA Technical Reports Server (NTRS)
Hughes, William O.; Mcnelis, Mark E.; Manning, Jerome E.
1994-01-01
NASA Lewis Research Center, in conjunction with General Dynamics Space Systems Division, has performed a test program to investigate the acoustic fill effect for an unblanketed payload fairing for a variety of payload simulators. This paper will discuss this test program and fill factor test data, and make comparisons with theoretical predictions. This paper will also address the NASA acoustic fill effect standard which was verified from the test data analysis.
Dopamine prediction errors in reward learning and addiction: from theory to neural circuitry
Keiflin, Ronald; Janak, Patricia H.
2015-01-01
Summary Midbrain dopamine (DA) neurons are proposed to signal reward prediction error (RPE), a fundamental parameter in associative learning models. This RPE hypothesis provides a compelling theoretical framework for understanding DA function in reward learning and addiction. New studies support a causal role for DA-mediated RPE activity in promoting learning about natural reward; however, this question has not been explicitly tested in the context of drug addiction. In this review, we integrate theoretical models with experimental findings on the activity of DA systems, and on the causal role of specific neuronal projections and cell types, to provide a circuit-based framework for probing DA-RPE function in addiction. By examining error-encoding DA neurons in the neural network in which they are embedded, hypotheses regarding circuit-level adaptations that possibly contribute to pathological error-signaling and addiction can be formulated and tested. PMID:26494275
NASA Astrophysics Data System (ADS)
Zhang, Zhilin; Savenije, Hubert H. G.
2017-07-01
The practical value of the surprisingly simple Van der Burgh equation in predicting saline water intrusion in alluvial estuaries is well documented, but the physical foundation of the equation is still weak. In this paper we provide a connection between the empirical equation and the theoretical literature, leading to a theoretical range of Van der Burgh's coefficient of 1/2 < K < 2/3 for density-driven mixing which falls within the feasible range of 0 < K < 1. In addition, we developed a one-dimensional predictive equation for the dispersion of salinity as a function of local hydraulic parameters that can vary along the estuary axis, including mixing due to tide-driven residual circulation. This type of mixing is relevant in the wider part of alluvial estuaries where preferential ebb and flood channels appear. Subsequently, this dispersion equation is combined with the salt balance equation to obtain a new predictive analytical equation for the longitudinal salinity distribution. Finally, the new equation was tested and applied to a large database of observations in alluvial estuaries, whereby the calibrated K values appeared to correspond well to the theoretical range.
Advanced turboprop noise prediction based on recent theoretical results
NASA Technical Reports Server (NTRS)
Farassat, F.; Padula, S. L.; Dunn, M. H.
1987-01-01
The development of a high speed propeller noise prediction code at Langley Research Center is described. The code utilizes two recent acoustic formulations in the time domain for subsonic and supersonic sources. The structure and capabilities of the code are discussed. Grid size study for accuracy and speed of execution on a computer is also presented. The code is tested against an earlier Langley code. Considerable increase in accuracy and speed of execution are observed. Some examples of noise prediction of a high speed propeller for which acoustic test data are available are given. A brisk derivation of formulations used is given in an appendix.
Extension-twist coupling of composite circular tubes with application to tilt rotor blade design
NASA Technical Reports Server (NTRS)
Nixon, Mark W.
1987-01-01
This investigation was conducted to determine if twist deformation required for the design of full-scale extension-twist-coupled tilt-rotor blades can be achieved within material design limit loads, and to demonstrate the accuracy of a coupled-beam analysis in predicting twist deformations. Two extension-twist-coupled tilt-rotor blade designs were developed based on theoretically optimum aerodynamic twist distributions. The designs indicated a twist rate requirement of between .216 and .333 deg/in. Agreement between axial tests and analytical predictions was within 10 percent at design limit loads. Agreement between the torsion tests and predictions was within 11 percent.
Empirical Prediction of Aircraft Landing Gear Noise
NASA Technical Reports Server (NTRS)
Golub, Robert A. (Technical Monitor); Guo, Yue-Ping
2005-01-01
This report documents a semi-empirical/semi-analytical method for landing gear noise prediction. The method is based on scaling laws of the theory of aerodynamic noise generation and correlation of these scaling laws with current available test data. The former gives the method a sound theoretical foundation and the latter quantitatively determines the relations between the parameters of the landing gear assembly and the far field noise, enabling practical predictions of aircraft landing gear noise, both for parametric trends and for absolute noise levels. The prediction model is validated by wind tunnel test data for an isolated Boeing 737 landing gear and by flight data for the Boeing 777 airplane. In both cases, the predictions agree well with data, both in parametric trends and in absolute noise levels.
Experimental test of the viscous anisotropy hypothesis for partially molten rocks
Qi, Chao; Kohlstedt, David L.; Katz, Richard F.; Takei, Yasuko
2015-01-01
Chemical differentiation of rocky planets occurs by melt segregation away from the region of melting. The mechanics of this process, however, are complex and incompletely understood. In partially molten rocks undergoing shear deformation, melt pockets between grains align coherently in the stress field; it has been hypothesized that this anisotropy in microstructure creates an anisotropy in the viscosity of the aggregate. With the inclusion of anisotropic viscosity, continuum, two-phase-flow models reproduce the emergence and angle of melt-enriched bands that form in laboratory experiments. In the same theoretical context, these models also predict sample-scale melt migration due to a gradient in shear stress. Under torsional deformation, melt is expected to segregate radially inward. Here we present torsional deformation experiments on partially molten rocks that test this prediction. Microstructural analyses of the distribution of melt and solid reveal a radial gradient in melt fraction, with more melt toward the center of the cylinder. The extent of this radial melt segregation grows with progressive strain, consistent with theory. The agreement between theoretical prediction and experimental observation provides a validation of this theory. PMID:26417107
Experimental test of the viscous anisotropy hypothesis for partially molten rocks.
Qi, Chao; Kohlstedt, David L; Katz, Richard F; Takei, Yasuko
2015-10-13
Chemical differentiation of rocky planets occurs by melt segregation away from the region of melting. The mechanics of this process, however, are complex and incompletely understood. In partially molten rocks undergoing shear deformation, melt pockets between grains align coherently in the stress field; it has been hypothesized that this anisotropy in microstructure creates an anisotropy in the viscosity of the aggregate. With the inclusion of anisotropic viscosity, continuum, two-phase-flow models reproduce the emergence and angle of melt-enriched bands that form in laboratory experiments. In the same theoretical context, these models also predict sample-scale melt migration due to a gradient in shear stress. Under torsional deformation, melt is expected to segregate radially inward. Here we present torsional deformation experiments on partially molten rocks that test this prediction. Microstructural analyses of the distribution of melt and solid reveal a radial gradient in melt fraction, with more melt toward the center of the cylinder. The extent of this radial melt segregation grows with progressive strain, consistent with theory. The agreement between theoretical prediction and experimental observation provides a validation of this theory.
NASA Astrophysics Data System (ADS)
Anderson, O. Roger
The rate of information processing during science learning and the efficiency of the learner in mobilizing relevant information in long-term memory as an aid in transmitting newly acquired information to stable storage in long-term memory are fundamental aspects of science content acquisition. These cognitive processes, moreover, may be substantially related in tempo and quality of organization to the efficiency of higher thought processes such as divergent thinking and problem-solving ability that characterize scientific thought. As a contribution to our quantitative understanding of these fundamental information processes, a mathematical model of information acquisition is presented and empirically evaluated in comparison to evidence obtained from experimental studies of science content acquisition. Computer-based models are used to simulate variations in learning parameters and to generate the theoretical predictions to be empirically tested. The initial tests of the predictive accuracy of the model show close agreement between predicted and actual mean recall scores in short-term learning tasks. Implications of the model for human information acquisition and possible future research are discussed in the context of the unique theoretical framework of the model.
Polarization sensitivity testing of off-plane reflection gratings
NASA Astrophysics Data System (ADS)
Marlowe, Hannah; McEntaffer, Randal L.; DeRoo, Casey T.; Miles, Drew M.; Tutt, James H.; Laubis, Christian; Soltwisch, Victor
2015-09-01
Off-Plane reflection gratings were previously predicted to have different efficiencies when the incident light is polarized in the transverse-magnetic (TM) versus transverse-electric (TE) orientations with respect to the grating grooves. However, more recent theoretical calculations which rigorously account for finitely conducting, rather than perfectly conducting, grating materials no longer predict significant polarization sensitivity. We present the first empirical results for radially ruled, laminar groove profile gratings in the off-plane mount which demonstrate no difference in TM versus TE efficiency across our entire 300-1500 eV bandpass. These measurements together with the recent theoretical results confirm that grazing incidence off-plane reflection gratings using real, not perfectly conducting, materials are not polarization sensitive.
Testing gravity with EG: mapping theory onto observations
NASA Astrophysics Data System (ADS)
Leonard, C. Danielle; Ferreira, Pedro G.; Heymans, Catherine
2015-12-01
We present a complete derivation of the observationally motivated definition of the modified gravity statistic EG. Using this expression, we investigate how variations to theory and survey parameters may introduce uncertainty in the general relativistic prediction of EG. We forecast errors on EG for measurements using two combinations of upcoming surveys, and find that theoretical uncertainties may dominate for a futuristic measurement. Finally, we compute predictions of EG under modifications to general relativity in the quasistatic regime, and comment on the pros and cons of using EG to test gravity with future surveys.
Lin, Chih-Tin; Meyhofer, Edgar; Kurabayashi, Katsuo
2010-01-01
Directional control of microtubule shuttles via microfabricated tracks is key to the development of controlled nanoscale mass transport by kinesin motor molecules. Here we develop and test a model to quantitatively predict the stochastic behavior of microtubule guiding when they mechanically collide with the sidewalls of lithographically patterned tracks. By taking into account appropriate probability distributions of microscopic states of the microtubule system, the model allows us to theoretically analyze the roles of collision conditions and kinesin surface densities in determining how the motion of microtubule shuttles is controlled. In addition, we experimentally observe the statistics of microtubule collision events and compare our theoretical prediction with experimental data to validate our model. The model will direct the design of future hybrid nanotechnology devices that integrate nanoscale transport systems powered by kinesin-driven molecular shuttles.
An experimental and theoretical evaluation of increased thermal diffusivity phase change devices
NASA Technical Reports Server (NTRS)
White, S. P.; Golden, J. O.; Stermole, F. J.
1972-01-01
This study was to experimentally evaluate and mathematically model the performance of phase change thermal control devices containing high thermal conductivity metal matrices. Three aluminum honeycomb filters were evaluated at five different heat flux levels using n-oct-adecane as the test material. The system was mathematically modeled by approximating the partial differential equations with a three-dimensional implicit alternating direction technique. The mathematical model predicts the system quite well. All of the phase change times are predicted. The heating of solid phase is predicted exactly while there is some variation between theoretical and experimental results in the liquid phase. This variation in the liquid phase could be accounted for by the fact that there are some heat losses in the cell and there could be some convection in the experimental system.
Impact of DNA twist accumulation on progressive helical wrapping of torsionally constrained DNA.
Li, Wei; Wang, Peng-Ye; Yan, Jie; Li, Ming
2012-11-21
DNA wrapping is an important mechanism for chromosomal DNA packaging in cells and viruses. Previous studies of DNA wrapping have been performed mostly on torsionally unconstrained DNA, while in vivo DNA is often under torsional constraint. In this study, we extend a previously proposed theoretical model for wrapping of torsionally unconstrained DNA to a new model including the contribution of DNA twist energy, which influences DNA wrapping drastically. In particular, due to accumulation of twist energy during DNA wrapping, it predicts a finite amount of DNA that can be wrapped on a helical spool. The predictions of the new model are tested by single-molecule study of DNA wrapping under torsional constraint using magnetic tweezers. The theoretical predictions and the experimental results are consistent with each other and their implications are discussed.
Judge, Timothy A; Rodell, Jessica B; Klinger, Ryan L; Simon, Lauren S; Crawford, Eean R
2013-11-01
Integrating 2 theoretical perspectives on predictor-criterion relationships, the present study developed and tested a hierarchical framework in which each five-factor model (FFM) personality trait comprises 2 DeYoung, Quilty, and Peterson (2007) facets, which in turn comprise 6 Costa and McCrae (1992) NEO facets. Both theoretical perspectives-the bandwidth-fidelity dilemma and construct correspondence-suggest that lower order traits would better predict facets of job performance (task performance and contextual performance). They differ, however, as to the relative merits of broad and narrow traits in predicting a broad criterion (overall job performance). We first meta-analyzed the relationship of the 30 NEO facets to overall job performance and its facets. Overall, 1,176 correlations from 410 independent samples (combined N = 406,029) were coded and meta-analyzed. We then formed the 10 DeYoung et al. facets from the NEO facets, and 5 broad traits from those facets. Overall, results provided support for the 6-2-1 framework in general and the importance of the NEO facets in particular. (c) 2013 APA, all rights reserved.
NASA Technical Reports Server (NTRS)
Andrews, E. H., Jr.; Mackley, E. A.
1976-01-01
An aerodynamic engine inlet analysis was performed on the experimental results obtained at nominal Mach numbers of 5, 6, and 7 from the NASA Hypersonic Research Engine (HRE) Aerothermodynamic Integration Model (AIM). Incorporation on the AIM of the mixed-compression inlet design represented the final phase of an inlet development program of the HRE Project. The purpose of this analysis was to compare the AIM inlet experimental results with theoretical results. Experimental performance was based on measured surface pressures used in a one-dimensional force-momentum theorem. Results of the analysis indicate that surface static-pressure measurements agree reasonably well with theoretical predictions except in the regions where the theory predicts large pressure discontinuities. Experimental and theoretical results both based on the one-dimensional force-momentum theorem yielded inlet performance parameters as functions of Mach number that exhibited reasonable agreement. Previous predictions of inlet unstart that resulted from pressure disturbances created by fuel injection and combustion appeared to be pessimistic.
NASA Astrophysics Data System (ADS)
Shi, Pengpeng; Zhang, Pengcheng; Jin, Ke; Chen, Zhenmao; Zheng, Xiaojing
2018-04-01
Metal magnetic memory (MMM) testing (also known as micro-magnetic testing) is a new non-destructive electromagnetic testing method that can diagnose ferromagnetic materials at an early stage by measuring the MMM signal directly on the material surface. Previous experiments have shown that many factors affect MMM signals, in particular, the temperature, the elastoplastic state, and the complex environmental magnetic field. However, the fact that there have been only a few studies of either how these factors affect the signals or the physical coupling mechanisms among them seriously limits the industrial applications of MMM testing. In this paper, a nonlinear constitutive relation for a ferromagnetic material considering the influences of temperature and elastoplastic state is established under a weak magnetic field and is used to establish a nonlinear thermo-magneto-elastoplastic coupling model of MMM testing. Comparing with experimental data verifies that the proposed theoretical model can accurately describe the thermo-magneto-elastoplastic coupling influence on MMM signals. The proposed theoretical model can predict the MMM signals in a complex environment and so is expected to provide a theoretical basis for improving the degree of quantification in MMM testing.
New test of the dynamic theory of neutron diffraction by a moving grating
NASA Astrophysics Data System (ADS)
Zakharov, Maxim; Frank, Alexander; Kulin, German; Goryunov, Semyon
2018-04-01
Recently, multiwave dynamical theory of neutron diffraction by a moving grating was developed. The theory predicts that at a certain height of the grating profile a significant suppression of the zero-order diffraction may occur. The experiment to confirm predictions of this theory was performed. The resulting diffracted UCNs spectra were measured using time-of-flight Fourier diffractometer. The experimental data were compared with the results of numerical simulation and were found in a good agreement with theoretical predictions.
Zenilman, J M; Miller, W C; Gaydos, C; Rogers, S M; Turner, C F
2003-04-01
Nucleic acid amplification tests have facilitated field based STD studies and increased screening activities. However, even with highly specific tests, the positive predictive value (PPV) of such tests may be lower than desirable in low prevalence populations. We estimated PPVs for a single LCR test in a population survey in which positive specimens were retested. The Baltimore STD and Behavior Survey (BSBS) was a population based behavioural survey of adults which included collecting urine specimens to assess the prevalence of gonorrhoea and chlamydial infection. Gonorrhoea and chlamydial infection were diagnosed by ligase chain reaction (LCR). Nearly all positive results were retested by LCR. Because of cost considerations, negative results were not confirmed. Predicted curves for the PPV were calculated for a single testing assuming an LCR test sensitivity of 95%, and test specificities in the range 95.0%-99.9%, for disease prevalences between 1% and 10%. Positive specimens were retested to derive empirical estimates of the PPV of a positive result on a single LCR test. 579 participants age 18-35 provided urine specimens. 20 (3.5%) subjects initially tested positive for chlamydial infection, and 39 (6.7%) tested positive for gonococcal infection. If positive results on the repeat LCR are taken as confirmation of a "true" infection, the observed PPV for the first LCR testing was 89.5% for chlamydial infection and 83.3% for gonorrhoea. This is within the range of theoretical PPVs calculated from the assumed sensitivities and specificities of the LCR assays. Empirical performance of a single LCR testing approximated the theoretically predicted PPV in this field study. This result demonstrates the need to take account of the lower PPVs obtained when such tests are used in field studies or clinical screening of low prevalence populations. Repeat testing of specimens, preferably with a different assay (for example, polymerase chain reaction), and disclosure of the non-trivial potential for false positive test results would seem appropriate in all such studies.
An Improvement of the Anisotropy and Formability Predictions of Aluminum Alloy Sheets
NASA Astrophysics Data System (ADS)
Banabic, D.; Comsa, D. S.; Jurco, P.; Wagner, S.; Vos, M.
2004-06-01
The paper presents an yield criterion for orthotropic sheet metals and its implementation in a theoretical model in order to calculate the Forming Limit Curves. The proposed yield criterion has been validated for two aluminum alloys: AA3103-0 and AA5182-0, respectively. The biaxial tensile test of cross specimens has been used for the determination of the experimental yield locus. The new yield criterion has been implemented in the Marciniak-Kuczynski model for the calculus of limit strains. The calculated Forming Limit Curves have been compared with the experimental ones, determined by frictionless test: bulge test, plane strain test and uniaxial tensile test. The predicted Forming Limit Curves using the new yield criterion are in good agreement with the experimental ones.
a Study of Ultrasonic Wave Propagation Through Parallel Arrays of Immersed Tubes
NASA Astrophysics Data System (ADS)
Cocker, R. P.; Challis, R. E.
1996-06-01
Tubular array structures are a very common component in industrial heat exchanging plant and the non-destructive testing of these arrays is essential. Acoustic methods using microphones or ultrasound are attractive but require a thorough understanding of the acoustic properties of tube arrays. This paper details the development and testing of a small-scale physical model of a tube array to verify the predictions of a theoretical model for acoustic propagation through tube arrays developed by Heckl, Mulholland, and Huang [1-5] as a basis for the consideration of small-scale physical models in the development of non-destructive testing procedures for tube arrays. Their model predicts transmission spectra for plane waves incident on an array of tubes arranged in straight rows. Relative transmission is frequency dependent with bands of high and low attenuation caused by resonances within individual tubes and between tubes in the array. As the number of rows in the array increases the relative transmission spectrum becomes more complex, with increasingly well-defined bands of high and low attenuation. Diffraction of acoustic waves with wavelengths less than the tube spacing is predicted and appears as step reductions in the transmission spectrum at frequencies corresponding to integer multiples of the tube spacing. Experiments with the physical model confirm the principle features of the theoretical treatment.
Theoretical Prediction of Microgravity Ignition Delay of Polymeric Fuels in Low Velocity Flows
NASA Technical Reports Server (NTRS)
Fernandez-Pello, A. C.; Torero, J. L.; Zhou, Y. Y.; Walther, D.; Ross, H. D.
2001-01-01
A new flammability apparatus and protocol, FIST (Forced Flow Ignition and Flame Spread Test), is under development. Based on the LIFT (Lateral Ignition and Flame Spread Test) protocol, FIST better reflects the environments expected in spacebased facilities. The final objective of the FIST research is to provide NASA with a test methodology that complements the existing protocol and provides a more comprehensive assessment of material flammability of practical materials for space applications. Theoretical modeling, an extensive normal gravity data bank and a few validation space experiments will support the testing methodology. The objective of the work presented here is to predict the ignition delay and critical heat flux for ignition of solid fuels in microgravity at airflow velocities below those induced in normal gravity. This is achieved through the application of a numerical model previously developed of piloted ignition of solid polymeric materials exposed to an external radiant heat flux. The model predictions will provide quantitative results about ignition of practical materials in the limiting conditions expected in space facilities. Experimental data of surface temperature histories and ignition delay obtained in the KC-135 aircraft are used to determine the critical pyrolysate mass flux for ignition and this value is subsequently used to predict the ignition delay and the critical heat flux for ignition of the material. Surface temperature and piloted ignition delay calculations for Polymethylmethacrylate (PMMA) and a Polypropylene/Fiberglass (PP/GL) composite were conducted under both reduced and normal gravity conditions. It was found that ignition delay times are significantly shorter at velocities below those induced by natural convection.
Craig, C L; Bauman, A; Reger-Nash, B
2010-03-01
The hierarchy of effects (HOE) model is often used in planning mass-reach communication campaigns to promote health, but has rarely been empirically tested. This paper examines Canada's 30 year ParticipACTION campaign to promote physical activity (PA). A cohort from the nationally representative 1981 Canada Fitness Survey was followed up in 1988 and 2002-2004. Modelling of these data tested whether the mechanisms of campaign effects followed the theoretical framework proposed in the HOE. Campaign awareness was measured in 1981. Outcome expectancy, attitudes, decision balance and future intention were asked in 1988. PA was assessed at all time points. Logistic regression was used to sequentially test mediating and moderating variables adjusting for age, sex and education. No selection bias was observed; however, relatively fewer respondents than non-respondents smoked or were underweight at baseline. Among those inactive at baseline, campaign awareness predicted outcome expectancy which in turn predicted positive attitude to PA. Positive attitudes predicted high decision balance, which predicted future intention. Future intention mediated the relationship between decision balance and sufficient activity. Among those sufficiently active at baseline, awareness was unrelated to outcome expectancy and inversely related to positive attitude. These results lend support to the HOE model, in that the effects of ParticipACTION's serial mass media campaigns were consistent with the sequential rollout of its messages, which in turn was associated with achieving an active lifestyle among those initially insufficiently active. This provides support to an often-used theoretical framework for designing health promotion media campaigns.
NASA Technical Reports Server (NTRS)
Farassat, F.; Dunn, M. H.; Padula, S. L.
1986-01-01
The development of a high speed propeller noise prediction code at Langley Research Center is described. The code utilizes two recent acoustic formulations in the time domain for subsonic and supersonic sources. The structure and capabilities of the code are discussed. Grid size study for accuracy and speed of execution on a computer is also presented. The code is tested against an earlier Langley code. Considerable increase in accuracy and speed of execution are observed. Some examples of noise prediction of a high speed propeller for which acoustic test data are available are given. A brisk derivation of formulations used is given in an appendix.
NASA Technical Reports Server (NTRS)
Elliott, D. G.
1977-01-01
Measurements of reaction rail currents, reaction rail voltages, and airgap magnetic fields in tests of the Linear Induction Motor Research Vehicle (LIMRV) were compared with theoretical calculations from the mesh/matrix theory. It was found that the rail currents and magnetic fields predicted by the theory are within 20 percent of the measured currents and fields at most motor locations in most of the runs, but differ by as much as a factor of two in some cases. The most consistent difference is a higher experimental than theoretical magnetic field near the entrance of the motor and a lower experimental than theoretical magnetic field near the exit. The observed differences between the theoretical and experimental magnetic fields and currents do not account for the differences of as much as 26 percent between the theoretical and experimental thrusts.
SSME seal test program: Test results for smooth, hole-pattern and helically-grooved stators
NASA Technical Reports Server (NTRS)
Childs, Dara W.
1987-01-01
All of the listed seals were tested in a liquid Halon test facility at high Reynolds numbers. In addition, a helically-grooved-stator seal was tested in an air seal facility. An analysis of the test results with comparisons to theoretical predictions supports the following conclusions: (1) For small seals, the Hirs' friction-factor model is more restricted than had been thought; (2) For smooth seals, predictions of stiffness and damping improve markedly as the radical clearance is reduced; (3) Friction-factor data for hole-pattern-seal stators frequently deviates from the Hirs model; (4) Predictions of stiffness and damping coefficients for hole-pattern-stator seals is generally reasonable; (5) Tests for the hole-pattern stators at reduced clearances show no clear optimum for hole-pattern seals with respect to either hole-area ratio or hole depth to minimum clearance ratios; (6) Tests of these hole-pattern stators show no significant advantage in net damping over smooth seals; (7) Tests of helically-grooved seal stators in Halon show reasonable agreement between theory and prediction for leakage and direct stiffness but poor agreement for the net damping coefficient.
Retif, Paul; Reinhard, Aurélie; Paquot, Héna; Jouan-Hureaux, Valérie; Chateau, Alicia; Sancey, Lucie; Barberi-Heyob, Muriel; Pinel, Sophie; Bastogne, Thierry
2016-01-01
This article addresses the in silico–in vitro prediction issue of organometallic nanoparticles (NPs)-based radiosensitization enhancement. The goal was to carry out computational experiments to quickly identify efficient nanostructures and then to preferentially select the most promising ones for the subsequent in vivo studies. To this aim, this interdisciplinary article introduces a new theoretical Monte Carlo computational ranking method and tests it using 3 different organometallic NPs in terms of size and composition. While the ranking predicted in a classical theoretical scenario did not fit the reference results at all, in contrast, we showed for the first time how our accelerated in silico virtual screening method, based on basic in vitro experimental data (which takes into account the NPs cell biodistribution), was able to predict a relevant ranking in accordance with in vitro clonogenic efficiency. This corroborates the pertinence of such a prior ranking method that could speed up the preclinical development of NPs in radiation therapy. PMID:27920524
Retif, Paul; Reinhard, Aurélie; Paquot, Héna; Jouan-Hureaux, Valérie; Chateau, Alicia; Sancey, Lucie; Barberi-Heyob, Muriel; Pinel, Sophie; Bastogne, Thierry
This article addresses the in silico-in vitro prediction issue of organometallic nanoparticles (NPs)-based radiosensitization enhancement. The goal was to carry out computational experiments to quickly identify efficient nanostructures and then to preferentially select the most promising ones for the subsequent in vivo studies. To this aim, this interdisciplinary article introduces a new theoretical Monte Carlo computational ranking method and tests it using 3 different organometallic NPs in terms of size and composition. While the ranking predicted in a classical theoretical scenario did not fit the reference results at all, in contrast, we showed for the first time how our accelerated in silico virtual screening method, based on basic in vitro experimental data (which takes into account the NPs cell biodistribution), was able to predict a relevant ranking in accordance with in vitro clonogenic efficiency. This corroborates the pertinence of such a prior ranking method that could speed up the preclinical development of NPs in radiation therapy.
VHSIC/VHSIC-Like Reliability Prediction Modeling
1989-10-01
prediction would require ’ kowledge of event statistics as well as device robustness. Ii1 Additionally, although this is primarily a theoretical, bottom...Degradation in Section 5.3 P = Power PDIP = Plastic DIP P(f) = Probability of Failure due to EOS or ESD P(flc) = Probability of Failure given Contact from an...the results of those stresses: Device Stress Part Number Power Dissipation Manufacturer Test Type Part Description Junction Teniperatune Package Type
NASA Astrophysics Data System (ADS)
Jones, G. T.; Jones, R. W. L.; Kennedy, B. W.; O'Neale, S. W.; Klein, H.; Morrison, D. R. O.; Schmid, P.; Wachsmuth, H.; Miller, D. B.; Mobayyen, M. M.; Wainstein, S.; Aderholz, M.; Hoffmann, E.; Katz, U. F.; Kern, J.; Schmitz, N.; Wittek, W.; Allport, P.; Myatt, G.; Radojicic, D.; Bullock, F. W.; Burke, S.
1987-03-01
Data obtained with the bubble chamber BEBC at CERN are used for the first significant test of Adler's prediction for the neutrino and antineutrino-proton scattering cross sections at vanishing four-momentum transfer squared Q 2. An Extended Vector Meson Dominance Model (EVDM) is applied to extrapolate Adler's prediction to experimentally accessible values of Q 2. The data show good agreement with Adler's prediction for Q 2→0 thus confirming the PCAC hypothesis in the kinematical region of high leptonic energy transfer ν>2 GeV. The good agreement of the data with the theoretical predictions also at higher Q 2, where the EVDM terms are dominant, also supports this model. However, an EVDM calculation without PCAC is clearly ruled out by the data.
Far-infrared self-broadening in methylcyanide - Absorber-perturber resonance
NASA Technical Reports Server (NTRS)
Buffa, G.; Tarrini, O.; De Natale, P.; Inguscio, M.; Pavone, F. S.; Prevedelli, M.; Evenson, K. M.; Zink, L. R.; Schwaab, G. W.
1992-01-01
Using tunable far-infrared spectrometers with high-frequency stability and accuracy, the self-pressure broadening and shift of CH3CN are measured. Evidence of absorber-perturber resonance effects on the collisional line shape are obtained. This tests the theoretical model and its possible improvements and also allows predictions of broadening and shift for a large class of molecules. Moreover, the resonance effect produces a theoretical temperature dependence of self-broadening that is different from what is commonly assumed.
NASA Technical Reports Server (NTRS)
Wang, James M.
1991-01-01
The aeroelastic stability of a shaft-fixed bearingless rotor is analyzed in wind-tunnel tests for a wide range of operating conditions in order to determine whether such a system could be made aeroelastically stable without incorporating auxiliary dampers. The model rotor and blade properties are determined and used as an input to a bearingless-rotor analysis. Theoretical predictions are compared with experimental results in hover and forward flights. The analysis predicts the lag mode damping satisfactorily for collective pitch between 5 deg and 10 deg; however, the quasi-steady linear aerodynamic modeling overpredicts the damping values for higher collective pitch settings. It is noted that soft blade pitch links improve aeroelastic stability in hover and at low advance ratio.
Pressure measurements of a three wave journal air bearing
NASA Technical Reports Server (NTRS)
Dimofte, Florin; Addy, Harold E., Jr.
1994-01-01
In order to validate theoretical predictions of a wave journal bearing concept, a bench test rig was assembled at NASA Lewis Research Center to measure the steady-state performance of a journal air bearing. The tester can run up to 30,000 RPM and the spindle has a run out of less than 1 micron. A three wave journal bearing (50 mm diameter and 58 mm length) has been machined at NASA Lewis. The pressures at 16 ports along the bearing circumference at the middle of the bearing length were measured and compared to the theoretical prediction. The bearing ran at speeds up to 15,000 RPM and certain loads. Good agreement was found between the measured and calculated pressures.
Field investigation of the drift shadow
Su, G.W.; Kneafsey, T.J.; Ghezzehei, T.A.; Cook, P.J.; Marshall, B.D.
2006-01-01
The "Drift Shadow" is defined as the relatively drier region that forms below subsurface cavities or drifts in unsaturated rock. Its existence has been predicted through analytical and numerical models of unsaturated flow. However, these theoretical predictions have not been demonstrated empirically to date. In this project we plan to test the drift shadow concept through field investigations and compare our observations to simulations. Based on modeling studies we have an identified a suitable site to perform the study at an inactive mine in a sandstone formation. Pretest modeling studies and preliminary characterization of the site are being used to develop the field scale tests.
ERIC Educational Resources Information Center
Haans, Antal
2018-01-01
Contrast analysis is a relatively simple but effective statistical method for testing theoretical predictions about differences between group means against the empirical data. Despite its advantages, contrast analysis is hardly used to date, perhaps because it is not implemented in a convenient manner in many statistical software packages. This…
El paradigma jerarquico de formacion de estructuras
NASA Astrophysics Data System (ADS)
Lambas, D. G.
This contribution aims at showing our current understanding of the hierarchical clustering scenario for structure formation, its main success in terms of agreement of theoretical predictions and observations, and the most direct tests that provide confidence on the validity of the paradigm. FULL TEXT IN SPANISH
Implicit motives, explicit traits, and task and contextual performance at work.
Lang, Jonas W B; Zettler, Ingo; Ewen, Christian; Hülsheger, Ute R
2012-11-01
Personality psychologists have long argued that explicit traits (as measured by questionnaires) channel the expression of implicit motives (as measured by coding imaginative verbal behavior) such that both interact in the prediction of relevant life outcome variables. In the present research, we apply these ideas in the context of industrial and organizational psychology and propose that 2 explicit traits work as channels for the expression of 3 core implicit motives in task and contextual job performance (extraversion for implicit affiliation and implicit power; explicit achievement for implicit achievement). As a test of these theoretical ideas, we report a study in which employees (N = 241) filled out a questionnaire booklet and worked on an improved modern implicit motive measure, the operant motive test. Their supervisors rated their task and contextual performance. Results support 4 of the 6 theoretical predictions and show that interactions between implicit motives and explicit traits increase the explained criterion variance in both task and contextual performance. (c) 2012 APA, all rights reserved.
Another baryon miracle? Testing solutions to the `missing dwarfs' problem
NASA Astrophysics Data System (ADS)
Trujillo-Gomez, Sebastian; Schneider, Aurel; Papastergis, Emmanouil; Reed, Darren S.; Lake, George
2018-04-01
The dearth of dwarf galaxies in the local Universe is hard to reconcile with the large number of low-mass haloes expected within the concordance Λ cold dark matter (ΛCDM) paradigm. In this paper, we perform a systematic evaluation of the uncertainties affecting the measurement of dark matter halo abundance using galaxy kinematics. Using a large sample of dwarf galaxies with spatially resolved kinematics, we derive a correction to obtain the abundance of galaxies as a function of maximum circular velocity - a direct probe of halo mass - from the line-of-sight velocity function in the Local Volume. This method provides a direct means of comparing the predictions of theoretical models and simulations (including non-standard cosmologies and novel galaxy formation physics) to the observational constraints. The new `galactic Vmax' function is steeper than the line-of-sight velocity function but still shallower than the theoretical CDM expectation, implying that unaccounted baryonic physics may be necessary to reduce the predicted abundance of galaxies. Using the galactic Vmax function, we investigate the theoretical effects of feedback-powered outflows and photoevaporation of gas due to reionization. At the 3σ confidence level, we find that feedback and reionization are not effective enough to reconcile the disagreement. In the case of maximum baryonic effects, the theoretical prediction still deviates significantly from the observations for Vmax < 60 km s-1. CDM predicts at least 1.8 times more galaxies with Vmax = 50 km s-1 and 2.5 times more than observed at 30 km s-1. Recent hydrodynamic simulations seem to resolve the discrepancy but disagree with the properties of observed galaxies with spatially resolved kinematics. This abundance problem might point to the need to modify cosmological predictions at small scales.
Solid propellant rocket motor internal ballistics performance variation analysis, phase 3
NASA Technical Reports Server (NTRS)
Sforzini, R. H.; Foster, W. A., Jr.; Murph, J. E.; Adams, G. W., Jr.
1977-01-01
Results of research aimed at improving the predictability of off nominal internal ballistics performance of solid propellant rocket motors (SRMs) including thrust imbalance between two SRMs firing in parallel are reported. The potential effects of nozzle throat erosion on internal ballistic performance were studied and a propellant burning rate low postulated. The propellant burning rate model when coupled with the grain deformation model permits an excellent match between theoretical results and test data for the Titan IIIC, TU455.02, and the first Space Shuttle SRM (DM-1). Analysis of star grain deformation using an experimental model and a finite element model shows the star grain deformation effects for the Space Shuttle to be small in comparison to those of the circular perforated grain. An alternative technique was developed for predicting thrust imbalance without recourse to the Monte Carlo computer program. A scaling relationship used to relate theoretical results to test results may be applied to the alternative technique of predicting thrust imbalance or to the Monte Carlo evaluation. Extended investigation into the effect of strain rate on propellant burning rate leads to the conclusion that the thermoelastic effect is generally negligible for both steadily increasing pressure loads and oscillatory loads.
NASA Technical Reports Server (NTRS)
Paine, D. A.; Zack, J. W.; Kaplan, M. L.
1979-01-01
The progress and problems associated with the dynamical forecast system which was developed to predict severe storms are examined. The meteorological problem of severe convective storm forecasting is reviewed. The cascade hypothesis which forms the theoretical core of the nested grid dynamical numerical modelling system is described. The dynamical and numerical structure of the model used during the 1978 test period is presented and a preliminary description of a proposed multigrid system for future experiments and tests is provided. Six cases from the spring of 1978 are discussed to illustrate the model's performance and its problems. Potential solutions to the problems are examined.
Parametric study of closed wet cooling tower thermal performance
NASA Astrophysics Data System (ADS)
Qasim, S. M.; Hayder, M. J.
2017-08-01
The present study involves experimental and theoretical analysis to evaluate the thermal performance of modified Closed Wet Cooling Tower (CWCT). The experimental study includes: design, manufacture and testing prototype of a modified counter flow forced draft CWCT. The modification based on addition packing to the conventional CWCT. A series of experiments was carried out at different operational parameters. In view of energy analysis, the thermal performance parameters of the tower are: cooling range, tower approach, cooling capacity, thermal efficiency, heat and mass transfer coefficients. The theoretical study included develops Artificial Neural Network (ANN) models to predicting various thermal performance parameters of the tower. Utilizing experimental data for training and testing, the models simulated by multi-layer back propagation algorithm for varying all operational parameters stated in experimental test.
Load Measurement in Structural Members Using Guided Acoustic Waves
NASA Astrophysics Data System (ADS)
Chen, Feng; Wilcox, Paul D.
2006-03-01
A non-destructive technique to measure load in structures such as rails and bridge cables by using guided acoustic waves is investigated both theoretically and experimentally. Robust finite element models for predicting the effect of load on guided wave propagation are developed and example results are presented for rods. Reasonably good agreement of experimental results with modelling prediction is obtained. The measurement technique has been developed to perform tests on larger specimens.
Weems, Carl F; Scott, Brandon G; Taylor, Leslie K; Cannon, Melinda F; Romano, Dawn M; Perry, Andre M
2013-08-01
This study tested a theoretical model of continuity in anxious emotion and its links to academic achievement in disaster-exposed youth. An urban school based sample of youths (n = 191; Grades 4-8) exposed to Hurricane Katrina were assessed at 24 months (Time 1) and then again at 30 months (Time 2) postdisaster. Academic achievement was assessed through end of the school year standardized test scores (~31 months after Katrina). The results suggest that the association of traumatic stress to academic achievement was indirect via linkages from earlier (Time 1) posttraumatic stress disorder symptoms that predicted later (Time 2) test anxiety. Time 2 test anxiety was then negatively associated with academic achievement. Age and gender invariance testing suggested strong consistency across gender and minor developmental variation in the age range examined. The model presented advances the developmental understanding of the expression of anxious emotion and its links to student achievement among disaster-exposed urban school children. The findings highlight the importance of identifying heterotypic continuity in anxiety and suggest potential applied and policy directions for disaster-exposed youth. Avenues for future theoretical refinement are also discussed.
Study on Predicting Axial Load Capacity of CFST Columns
NASA Astrophysics Data System (ADS)
Ravi Kumar, H.; Muthu, K. U.; Kumar, N. S.
2017-11-01
This work presents an analytical study and experimental study on the behaviour and ultimate load carrying capacity of axially compressed self-compacting concrete-filled steel tubular columns. Results of tests conducted by various researchers on 213 samples concrete-filled steel tubular columns are reported and present authors experimental data are reported. Two theoretical equations were derived for the prediction of the ultimate axial load strength of concrete-filled steel tubular columns. The results from prediction were compared with the experimental data. Validation to the experimental results was made.
Space shuttle booster multi-engine base flow analysis
NASA Technical Reports Server (NTRS)
Tang, H. H.; Gardiner, C. R.; Anderson, W. A.; Navickas, J.
1972-01-01
A comprehensive review of currently available techniques pertinent to several prominent aspects of the base thermal problem of the space shuttle booster is given along with a brief review of experimental results. A tractable engineering analysis, capable of predicting the power-on base pressure, base heating, and other base thermal environmental conditions, such as base gas temperature, is presented and used for an analysis of various space shuttle booster configurations. The analysis consists of a rational combination of theoretical treatments of the prominent flow interaction phenomena in the base region. These theories consider jet mixing, plume flow, axisymmetric flow effects, base injection, recirculating flow dynamics, and various modes of heat transfer. Such effects as initial boundary layer expansion at the nozzle lip, reattachment, recompression, choked vent flow, and nonisoenergetic mixing processes are included in the analysis. A unified method was developed and programmed to numerically obtain compatible solutions for the various flow field components in both flight and ground test conditions. Preliminary prediction for a 12-engine space shuttle booster base thermal environment was obtained for a typical trajectory history. Theoretical predictions were also obtained for some clustered-engine experimental conditions. Results indicate good agreement between the data and theoretical predicitons.
Nucleation and Growth Kinetics from LaMer Burst Data.
Chu, Daniel B K; Owen, Jonathan S; Peters, Baron
2017-10-12
In LaMer burst nucleation, the individual nucleation events happen en masse, quasi-simultaneously, and at nearly identical homogeneous conditions. These properties make LaMer burst nucleation important for applications that require monodispersed particles and also for theoretical analyses. Sugimoto and co-workers predicted that the number of nuclei generated during a LaMer burst depends only on the solute supply rate and the growth rate, independent of the nucleation kinetics. Some experiments confirm that solute supply kinetics control the number of nuclei, but flaws in the original theoretical analysis raise questions about the predicted roles of growth and nucleation kinetics. We provide a rigorous analysis of the coupled equations that govern concentrations of nuclei and solutes. Our analysis confirms that the number of nuclei is largely determined by the solute supply and growth rates, but our predicted relationship differs from that of Sugimoto et al. Moreover, we find that additional nucleus size dependent corrections should emerge in systems with slow growth kinetics. Finally, we show how the nucleation kinetics determine the particle size distribution. We suggest that measured particle size distributions might therefore provide ways to test theoretical models of homogeneous nucleation kinetics.
Marsh, Herbert W; Pekrun, Reinhard; Murayama, Kou; Arens, A Katrin; Parker, Philip D; Guo, Jiesi; Dicke, Theresa
2018-02-01
Our newly proposed integrated academic self-concept model integrates 3 major theories of academic self-concept formation and developmental perspectives into a unified conceptual and methodological framework. Relations among math self-concept (MSC), school grades, test scores, and school-level contextual effects over 6 years, from the end of primary school through the first 5 years of secondary school (a representative sample of 3,370 German students, 42 secondary schools, 50% male, M age at grade 5 = 11.75) support the (1) internal/external frame of reference model: Math school grades had positive effects on MSC, but the effects of German grades were negative; (2) reciprocal effects (longitudinal panel) model: MSC was predictive of and predicted by math test scores and school grades; (3) big-fish-little-pond effect: The effects on MSC were negative for school-average achievement based on 4 indicators (primary school grades in math and German, school-track prior to the start of secondary school, math test scores in the first year of secondary school). Results for all 3 theoretical models were consistent across the 5 secondary school years: This supports the prediction of developmental equilibrium. This integration highlights the robustness of support over the potentially volatile early to middle adolescent period; the interconnectedness and complementarity of 3 ASC models; their counterbalancing strengths and weaknesses; and new theoretical, developmental, and substantive implications at their intersections. (PsycINFO Database Record (c) 2018 APA, all rights reserved).
Predicting heavy episodic drinking using an extended temporal self-regulation theory.
Black, Nicola; Mullan, Barbara; Sharpe, Louise
2017-10-01
Alcohol consumption contributes significantly to the global burden from disease and injury, and specific patterns of heavy episodic drinking contribute uniquely to this burden. Temporal self-regulation theory and the dual-process model describe similar theoretical constructs that might predict heavy episodic drinking. The aims of this study were to test the utility of temporal self-regulation theory in predicting heavy episodic drinking, and examine whether the theoretical relationships suggested by the dual-process model significantly extend temporal self-regulation theory. This was a predictive study with 149 Australian adults. Measures were questionnaires (self-report habit index, cues to action scale, purpose-made intention questionnaire, timeline follow-back questionnaire) and executive function tasks (Stroop, Tower of London, operation span). Participants completed measures of theoretical constructs at baseline and reported their alcohol consumption two weeks later. Data were analysed using hierarchical multiple linear regression. Temporal self-regulation theory significantly predicted heavy episodic drinking (R 2 =48.0-54.8%, p<0.001) and the hypothesised extension significantly improved the prediction of heavy episodic drinking frequency (ΔR 2 =4.5%, p=0.001) but not peak consumption (ΔR 2 =1.4%, p=0.181). Intention and behavioural prepotency directly predicted heavy episodic drinking (p<0.01). Planning ability moderated the intention-behaviour relationship and inhibitory control moderated the behavioural prepotency-behaviour relationship (p<0.05). Both temporal self-regulation theory and the extended temporal self-regulation theory provide good prediction of heavy episodic drinking. Intention, behavioural prepotency, planning ability and inhibitory control may be good targets for interventions designed to decrease heavy episodic drinking. Copyright © 2017 Elsevier Ltd. All rights reserved.
New Modelling of Localized Necking in Sheet Metal Stretching
NASA Astrophysics Data System (ADS)
Bressan, José Divo
2011-01-01
Present work examines a new mathematical model to predict the onset of localized necking in the industrial processes of sheet metal forming such as biaxial stretching. Sheet metal formability is usually assessed experimentally by testing such as the Nakajima test to obtain the Forming Limit Curve, FLC, which is an essential material parameter necessary to numerical simulations by FEM. The Forming Limit Diagram or "Forming Principal Strain Map" shows the experimental FLC which is the plot of principal true strains in the sheet metal surface, ɛ1 and ɛ2, occurring at critical points obtained in laboratory formability tests or in the fabrication process. Two types of undesirable rupture mechanisms can occur in sheet metal forming products: localized necking and shear induced fracture. Therefore, two kinds of limit strain curves can be plotted: the local necking limit curve FLC-N and the shear fracture limit curve FLC-S. Localized necking is theoretically anticipated to initiate at a thickness defect ƒin = hib/hia inside the grooved sheet thickness hia, but only at the instability point of maximum load. The inception of grooving on the sheet surface evolves from instability point to localized necking and final rupture, during further sheet metal straining. Work hardening law is defined for a strain and strain rate material by the effective stress σ¯ = σo(1+βɛ¯)n???ɛM. The average experimental hardening law curve for tensile tests at 0°, 45° and 90°, assuming isotropic plasticity, was used to analyze the plasticity behavior during the biaxial stretching of sheet metals. Theoretical predicted curves of local necking limits are plotted in the positive quadrant of FPSM for different defect values ƒin and plasticity parameters. Limit strains are obtained from a software developed by the author. Some experimental results of forming limit curve obtained from experiments for IF steel sheets are compared with the theoretical predicted curves: the correlation is good.
Lozano, Oscar M; Rojas, Antonio J; Pérez, Cristino; González-Sáiz, Francisco; Ballesta, Rosario; Izaskun, Bilbao
2008-05-01
The aim of this work is to show evidence of the validity of the Health-Related Quality of Life for Drug Abusers Test (HRQoLDA Test). This test was developed to measure specific HRQoL for drugs abusers, within the theoretical addiction framework of the biaxial model. The sample comprised 138 patients diagnosed with opiate drug dependence. In this study, the following constructs and variables of the biaxial model were measured: severity of dependence, physical health status, psychological adjustment and substance consumption. Results indicate that the HRQoLDA Test scores are related to dependency and consumption-related problems. Multiple regression analysis reveals that HRQoL can be predicted from drug dependence, physical health status and psychological adjustment. These results contribute empirical evidence of the theoretical relationships established between HRQoL and the biaxial model, and they support the interpretation of the HRQoLDA Test to measure HRQoL in drug abusers, thus providing a test to measure this specific construct in this population.
NASA Astrophysics Data System (ADS)
Lawson, Anton E.; Baker, William P.; Didonato, Lisa; Verdi, Michael P.; Johnson, Margaret A.
Two hypotheses about theoretical concept acquisition, application, and change were tested. College biology students classified as intuitive, transitional, or reflective (hypothetico-deductive) reasoners were first taught two theoretical concepts (molecular polarity and bonding) to explain the mixing of dye with water, but not with oil, when all three were shaken in a container. The students were then tested in a context in which they misapplied the concepts in an attempt to explain the gradual spread of blue dye in standing water. Next students were taught another theoretical concept (diffusion), with and without the use of physical analogues. They were retested to see which students acquired the concept of diffusion and which students changed from use of the incorrect polarity and bonding concepts (i.e., the misconceptions) to use of the diffusion concept to correctly explain the dye's gradual spread. As predicted, the experimental/analogy group scored significantly higher than the control group on a posttest question that required the definition of diffusion. Also as predicted, hypothetico-deductive reasoning skill was significantly related to correct application of the diffusion concept and to a change from the misapplication of the polarity and bonding concepts to the correct application of the diffusion concept to explain the gradual spread of the blue dye. Thus, the results support the hypotheses that physical analogues are helpful in theoretical concept acquisition and that hypothetico-deductive reasoning is needed for successful concept application and change. Educational implications are drawn.
Papadopoulos, Timothy C.; Spanoudis, George C.; Georgiou, George K.
2016-01-01
We examined the prominent theoretical explanations of the RAN-reading relationship in a relatively transparent language (Greek) in a sample of children (n = 286) followed from Grade 1 to Grade 2. Specifically, we tested the fit of eight different models, as defined by the type of reading performance predicted (oral vs. silent word reading fluency), the type of RAN tasks (non-alphanumeric vs. alphanumeric), and the RAN effects (direct vs. indirect). Working memory, attention, processing speed, and motor skills were used as “common cause” variables predicting both RAN and reading fluency and phonological awareness and orthographic processing were used as mediators of RAN's effects on reading fluency. The findings of both concurrent and longitudinal analyses indicated that RAN is a unique predictor of oral reading fluency, but not silent reading fluency. Using alphanumeric or non-alphanumeric RAN did not particularly affect the RAN-reading relationship. Both phonological awareness and orthographic processing partly mediated RAN's effects on reading fluency. Theoretical implications of these findings are discussed. PMID:27605918
NASA Astrophysics Data System (ADS)
Rashidi Moghaddam, M.; Ayatollahi, M. R.; Berto, F.
2018-01-01
The values of mode II fracture toughness reported in the literature for several rocks are studied theoretically by using a modified criterion based on strain energy density averaged over a control volume around the crack tip. The modified criterion takes into account the effect of T-stress in addition to the singular terms of stresses/strains. The experimental results are related to mode II fracture tests performed on the semicircular bend and Brazilian disk specimens. There are good agreements between theoretical predictions using the generalized averaged strain energy density criterion and the experimental results. The theoretical results reveal that the value of mode II fracture toughness is affected by the size of control volume around the crack tip and also the magnitude and sign of T-stress.
Muons and seismic: a dynamic duo for the shallow subsurface?
Mellors, Robert; Chapline, George; Bonneville, Alain; ...
2016-12-01
This paper explores, at a preliminary level, the possibility of merging seismic data, both active and passive, with density constraints inferred from muon measurements. We focus on a theoretical analysis but note that muon experiments are ongoing to test model predictions with experimental data.
Abuse and neglect of the frail elderly at home: an exploration of theoretical relationships.
Phillips, L R
1983-09-01
Using an ex post facto, correlational descriptive design, a purposive sample of 74 elderly individuals who were identified as either having a 'good relationship' or an 'abusive/neglectful relationship' with their related caregivers were interviewed in their own homes. The purpose of the study was to test two hypotheses which predicted the nature of differences between the two groups and four which predicted the magnitude and direction of theoretically deduced causal relationships. The data showed that demographic characteristics and certain theoretical variable such as anger, hostility and stress were remarkably similar between groups. The significant differences (P less than 0.05) between the two groups included lower expectations among the abused subjects for their caregivers, lower perceptions among the abused subjects of their caregiver's actual behaviour, differences between the social networks of the two groups and more depression in the 'abuse' group. Using multiple regression analysis, a total of four causal models' were tested using anger, depression, anxiety, and abuse as terminal dependent variables. The amount of explained variance ranged from 22% for anxiety to 58% for abuse. An empirical model was generated from data available in which 2 variables, perceptions of the caregiver and family members in the house available to help, explained 54% of the variance in abuse.
Verification of component mode techniques for flexible multibody systems
NASA Technical Reports Server (NTRS)
Wiens, Gloria J.
1990-01-01
Investigations were conducted in the modeling aspects of flexible multibodies undergoing large angular displacements. Models were to be generated and analyzed through application of computer simulation packages employing the 'component mode synthesis' techniques. Multibody Modeling, Verification and Control Laboratory (MMVC) plan was implemented, which includes running experimental tests on flexible multibody test articles. From these tests, data was to be collected for later correlation and verification of the theoretical results predicted by the modeling and simulation process.
Dou, Kaili; Yu, Ping; Liu, Fang; Guan, YingPing; Li, Zhenye; Ji, Yumeng; Du, Ningkai; Lu, Xudong; Duan, Huilong
2017-01-01
Background Chronic disease patients often face multiple challenges from difficult comorbidities. Smartphone health technology can be used to help them manage their conditions only if they accept and use the technology. Objective The aim of this study was to develop and test a theoretical model to predict and explain the factors influencing patients’ acceptance of smartphone health technology for chronic disease management. Methods Multiple theories and factors that may influence patients’ acceptance of smartphone health technology have been reviewed. A hybrid theoretical model was built based on the technology acceptance model, dual-factor model, health belief model, and the factors identified from interviews that might influence patients’ acceptance of smartphone health technology for chronic disease management. Data were collected from patient questionnaire surveys and computer log records about 157 hypertensive patients’ actual use of a smartphone health app. The partial least square method was used to test the theoretical model. Results The model accounted for .412 of the variance in patients’ intention to adopt the smartphone health technology. Intention to use accounted for .111 of the variance in actual use and had a significant weak relationship with the latter. Perceived ease of use was affected by patients’ smartphone usage experience, relationship with doctor, and self-efficacy. Although without a significant effect on intention to use, perceived ease of use had a significant positive influence on perceived usefulness. Relationship with doctor and perceived health threat had significant positive effects on perceived usefulness, countering the negative influence of resistance to change. Perceived usefulness, perceived health threat, and resistance to change significantly predicted patients’ intentions to use the technology. Age and gender had no significant influence on patients’ acceptance of smartphone technology. The study also confirmed the positive relationship between intention to use and actual use of smartphone health apps for chronic disease management. Conclusions This study developed a theoretical model to predict patients’ acceptance of smartphone health technology for chronic disease management. Although resistance to change is a significant barrier to technology acceptance, careful management of doctor-patient relationship, and raising patients’ awareness of the negative effect of chronic disease can negate the effect of resistance and encourage acceptance and use of smartphone health technology to support chronic disease management for patients in the community. PMID:29212629
Long-term prediction test procedure for most ICs, based on linear response theory
NASA Technical Reports Server (NTRS)
Litovchenko, V.; Ivakhnenko, I.
1991-01-01
Experimentally, thermal annealing is known to be a factor which enables a number of different integrated circuits (IC's) to recover their operating characteristics after suffering radiation damage in the space radiation environment; thus, decreasing and limiting long term cumulative total-dose effects. This annealing is also known to be accelerated at elevated temperatures both during and after irradiation. Linear response theory (LRT) was applied, and a linear response function (LRF) to predict the radiation/annealing response of sensitive parameters of IC's for long term (several months or years) exposure to the space radiation environment were constructed. Compressing the annealing process from several years in orbit to just a few hours or days in the laboratory is achieved by subjecting the IC to elevated temperatures or by increasing the typical spaceflight dose rate by several orders of magnitude for simultaneous radiation/annealing only. The accomplishments are as follows: (1) the test procedure to make predictions of the radiation response was developed; (2) the calculation of the shift in the threshold potential due to the charge distribution in the oxide was written; (3) electron tunneling processes from the bulk Si to the oxide region in an MOS IC were estimated; (4) in order to connect the experimental annealing data to the theoretical model, constants of the model of the basic annealing process were established; (5) experimental data obtained at elevated temperatures were analyzed; (6) time compression and reliability of predictions for the long term region were shown; (7) a method to compress test time and to make predictions of response for the nonlinear region was proposed; and (8) nonlinearity of the LRF with respect to log(t) was calculated theoretically from a model.
Chan, Siew Foong; Deeks, Jonathan J; Macaskill, Petra; Irwig, Les
2008-01-01
To compare three predictive models based on logistic regression to estimate adjusted likelihood ratios allowing for interdependency between diagnostic variables (tests). This study was a review of the theoretical basis, assumptions, and limitations of published models; and a statistical extension of methods and application to a case study of the diagnosis of obstructive airways disease based on history and clinical examination. Albert's method includes an offset term to estimate an adjusted likelihood ratio for combinations of tests. Spiegelhalter and Knill-Jones method uses the unadjusted likelihood ratio for each test as a predictor and computes shrinkage factors to allow for interdependence. Knottnerus' method differs from the other methods because it requires sequencing of tests, which limits its application to situations where there are few tests and substantial data. Although parameter estimates differed between the models, predicted "posttest" probabilities were generally similar. Construction of predictive models using logistic regression is preferred to the independence Bayes' approach when it is important to adjust for dependency of tests errors. Methods to estimate adjusted likelihood ratios from predictive models should be considered in preference to a standard logistic regression model to facilitate ease of interpretation and application. Albert's method provides the most straightforward approach.
Compaction Behavior of Granular Materials
NASA Astrophysics Data System (ADS)
Endicott, Mark R.; Kenkre, V. M.; Glass, S. Jill; Hurd, Alan J.
1996-03-01
We report the results of our recent study of compaction of granular materials. A theoretical model is developed for the description of the compaction of granular materials exemplified by granulated ceramic powders. Its predictions are compared to observations of uniaxial compaction tests of ceramic granules of PMN-PT, spray dried alumina and rutile. The theoretical model employs a volume-based statistical mechanics treatment and an activation analogy. Results of a computer simulation of random packing of discs in two dimensions are also reported. The effect of type of particle size distribution and other parameters of that distribution on the calculated quantities are discussed. We examine the implications of the results of the simulation for the theoretical model.
Kelly, Stephanie; Melnyk, Bernadette Mazurek; Belyea, Michael
2012-04-01
Most adolescents do not meet national recommendations regarding physical activity and/or the intake of fruits and vegetables. The purpose of this study was to explore whether variables in the information, motivation, behavioral skills (IMB) model of health promotion predicted physical activity and fruit and vegetable intake in 404 adolescents from 2 high schools in the Southwest United States using structural equation modeling (SEM). The SEM models included theoretical constructs, contextual variables, and moderators. The theoretical relationships in the IMB model were confirmed and were moderated by gender and race. Interventions that incorporate cognitive-behavioral skills building may be a key factor for promoting physical activity as well as fruit and vegetable intake in adolescents. Copyright © 2012 Wiley Periodicals, Inc.
Thrust imbalance of solid rocket motor pairs on Space Shuttle flights
NASA Technical Reports Server (NTRS)
Foster, W. A., Jr.; Shu, P. H.; Sforzini, R. H.
1986-01-01
This analysis extends the investigation presented at the 17th Joint Propulsion Conference in 1981 to include fifteen sets of Space Shuttle flight data. The previous report dealt only with static test data and the first flight pair. The objective is to compare the authors' previous theoretical analysis of thrust imbalance with actual Space Shuttle performance. The theoretical prediction method, which involves a Monte Carlo technique, is reviewed briefly as are salient features of the flight instrumentation system and the statistical analysis. A scheme for smoothing flight data is discussed. The effects of changes in design parameters are discussed with special emphasis on the filament wound motor case being developed to replace the steel case. Good agreement between the predictions and the flight data is demonstrated.
Prediction of the amount of urban waste solids by applying a gray theoretical model.
Li, Xiao-Ming; Zeng, Guang-Ming; Wang, Ming; Liu, Jin-Jin
2003-01-01
Urban waste solids are now becoming one of the most crucial environmental problems. There are several different kinds of technologies normally used for waste solids disposal, among which landfill is more favorable in China than others, especially for urban waste solids. Most of the design works up to now are based on a roughly estimation of the amount of urban waste solids without any theoretical support, which lead to a series problems. To meet the basic information requirements for the design work, the amount of the urban waste solids was predicted in this research by applying the gray theoretical model GM (1,1) through non-linear differential equation simulation. The model parameters were estimated with the least square method (LSM) by running a certain MATALAB program, and the hypothesis test results show that the residual between the prediction value and the actual value approximately comply with the normal distribution N (0, 0.21(2)), and the probability of the residual within the range ( -0.17, 0.19) is more than 95%, which indicate obviously that the model can be well used for the prediction of the amount of waste solids and those had been already testified by the latest two years data about the urban waste solids from Loudi City of China. With this model, the predicted amount of the waste solids produced in Loudi City in the next 30 years is 8049000 ton in total.
Food web complexity and stability across habitat connectivity gradients.
LeCraw, Robin M; Kratina, Pavel; Srivastava, Diane S
2014-12-01
The effects of habitat connectivity on food webs have been studied both empirically and theoretically, yet the question of whether empirical results support theoretical predictions for any food web metric other than species richness has received little attention. Our synthesis brings together theory and empirical evidence for how habitat connectivity affects both food web stability and complexity. Food web stability is often predicted to be greatest at intermediate levels of connectivity, representing a compromise between the stabilizing effects of dispersal via rescue effects and prey switching, and the destabilizing effects of dispersal via regional synchronization of population dynamics. Empirical studies of food web stability generally support both this pattern and underlying mechanisms. Food chain length has been predicted to have both increasing and unimodal relationships with connectivity as a result of predators being constrained by the patch occupancy of their prey. Although both patterns have been documented empirically, the underlying mechanisms may differ from those predicted by models. In terms of other measures of food web complexity, habitat connectivity has been empirically found to generally increase link density but either reduce or have no effect on connectance, whereas a unimodal relationship is expected. In general, there is growing concordance between empirical patterns and theoretical predictions for some effects of habitat connectivity on food webs, but many predictions remain to be tested over a full connectivity gradient, and empirical metrics of complexity are rarely modeled. Closing these gaps will allow a deeper understanding of how natural and anthropogenic changes in connectivity can affect real food webs.
Working Memory Capacity and Stroop Interference: Global versus Local Indices of Executive Control
ERIC Educational Resources Information Center
Meier, Matt E.; Kane, Michael J.
2013-01-01
Two experiments examined the relations among working memory capacity (WMC), congruency-sequence effects, proportion-congruency effects, and the color-word Stroop effect to test whether congruency-sequence effects might inform theoretical claims regarding WMC's prediction of Stroop interference. In Experiment 1, subjects completed either a…
The Communicative Function of Ambiguity in Language
ERIC Educational Resources Information Center
Piantadosi, Steven T.; Tily, Harry; Gibson, Edward
2012-01-01
We present a general information-theoretic argument that all efficient communication systems will be ambiguous, assuming that context is informative about meaning. We also argue that ambiguity allows for greater ease of processing by permitting efficient linguistic units to be re-used. We test predictions of this theory in English, German, and…
ERIC Educational Resources Information Center
Phan, Huy Phuong
2009-01-01
Recent research indicates that study processing strategies, effort, reflective thinking practice, and achievement goals are important factors contributing to the prediction of students' academic success. Very few studies have combined these theoretical orientations within one conceptual model. This study tested a conceptual model that included, in…
Feedback and Sentence Learning.
ERIC Educational Resources Information Center
Guthrie, John T.
The theoretical functions of external feedback in SR and closed loop models of verbal learning are presented. Contradictory predictions from the models are tested with a three by three factorial experiment including three types of feedback and three amounts of rehearsal. There were 90 adult students run individually and they were required to learn…
Influence of Population Density on Offspring Number and Size in Burying Beetles
ERIC Educational Resources Information Center
Rauter, Claudia M.
2010-01-01
This laboratory exercise investigates the influence of population density on offspring number and size in burying beetles. Students test the theoretical predictions that brood size declines and offspring size increases when competition over resources becomes stronger with increasing population density. Students design the experiment, collect and…
Emotion-Work Performance among Dual-Earner Couples: Testing Four Theoretical Perspectives
ERIC Educational Resources Information Center
Minnotte, Krista Lynn; Stevens, Daphne Pedersen; Minnotte, Michael C.; Kiger, Gary
2007-01-01
This study compares four theories of domestic labor in their ability to predict relative emotion-work performance among dual-earner couples. Specifically, the authors investigate the effects of gender ideology, time availability, relative resources, and crossover factors on the dependent variable of relative emotion-work performance using…
Interaction between polymer constituents and the structure of biopolymers
NASA Technical Reports Server (NTRS)
Rein, R.
1974-01-01
The paper reviews the current status of methods for calculating intermolecular interactions between biopolymer units. The nature of forces contributing to the various domains of intermolecular separations is investigated, and various approximations applicable in the respective regions are examined. The predictive value of current theory is tested by establishing a connection with macroscopic properties and comparing the theoretical predicted values with those derived from experimental data. This has led to the introduction of a statistical model describing DNA.
NASA Astrophysics Data System (ADS)
Sadi, Maryam
2018-01-01
In this study a group method of data handling model has been successfully developed to predict heat capacity of ionic liquid based nanofluids by considering reduced temperature, acentric factor and molecular weight of ionic liquids, and nanoparticle concentration as input parameters. In order to accomplish modeling, 528 experimental data points extracted from the literature have been divided into training and testing subsets. The training set has been used to predict model coefficients and the testing set has been applied for model validation. The ability and accuracy of developed model, has been evaluated by comparison of model predictions with experimental values using different statistical parameters such as coefficient of determination, mean square error and mean absolute percentage error. The mean absolute percentage error of developed model for training and testing sets are 1.38% and 1.66%, respectively, which indicate excellent agreement between model predictions and experimental data. Also, the results estimated by the developed GMDH model exhibit a higher accuracy when compared to the available theoretical correlations.
Sweet, Shane N.; Fortier, Michelle S.; Strachan, Shaelyn M.; Blanchard, Chris M.; Boulay, Pierre
2014-01-01
Self-determination theory and self-efficacy theory are prominent theories in the physical activity literature, and studies have begun integrating their concepts. Sweet, Fortier, Strachan and Blanchard (2012) have integrated these two theories in a cross-sectional study. Therefore, this study sought to test a longitudinal integrated model to predict physical activity at the end of a 4-month cardiac rehabilitation program based on theory, research and Sweet et al.’s cross-sectional model. Participants from two cardiac rehabilitation programs (N=109) answered validated self-report questionnaires at baseline, two and four months. Data were analyzed using Amos to assess the path analysis and model fit. Prior to integration, perceived competence and self-efficacy were combined, and labeled as confidence. After controlling for 2-month physical activity and cardiac rehabilitation site, no motivational variables significantly predicted residual change in 4-month physical activity. Although confidence at two months did not predict residual change in 4-month physical activity, it had a strong positive relationship with 2-month physical activity (β=0.30, P<0.001). The overall model retained good fit indices. In conclusion, results diverged from theoretical predictions of physical activity, but self-determination and self-efficacy theory were still partially supported. Because the model had good fit, this study demonstrated that theoretical integration is feasible. PMID:26973926
NASA Technical Reports Server (NTRS)
Farn, Michael W.; Knowlden, Robert E.
1993-01-01
In this paper, we describe the theory, fabrication and test of a binary optics 'echelon'. The echelon is a grating structure which separates electromagnetic radiation of different wavelengths, but it does so according to diffraction order rather than by dispersion within one diffraction order, as is the case with conventional gratings. A prototype echelon, designed for the visible spectrum, is fabricated using the binary optics process. Tests of the prototype show good agreement with theoretical predictions.
Preliminary dynamic tests of a flight-type ejector
NASA Technical Reports Server (NTRS)
Drummond, Colin K.
1992-01-01
A thrust augmenting ejector was tested to provide experimental data to assist in the assessment of theoretical models to predict duct and ejector fluid-dynamic characteristics. Eleven full-scale thrust augmenting ejector tests were conducted in which a rapid increase in the ejector nozzle pressure ratio was effected through a unique facility, bypass/burst-disk subsystem. The present work examines two cases representative of the test performance window. In the first case, the primary nozzle pressure ration (NPR) increased 36 percent from one unchoked (NPR = 1.29) primary flow condition to another (NPR = 1.75) over a 0.15 second interval. The second case involves choked primary flow conditions, where a 17 percent increase in primary nozzle flowrate (from NPR = 2.35 to NPR = 2.77) occurred over approximately 0.1 seconds. Although the real-time signal measurements support qualitative remarks on ejector performance, extracting quantitative ejector dynamic response was impeded by excessive aerodynamic noise and thrust stand dynamic (resonance) characteristics. It does appear, however, that a quasi-steady performance assumption is valid for this model with primary nozzle pressure increased on the order of 50 lb(sub f)/s. Transient signal treatment of the present dataset is discussed and initial interpretations of the results are compared with theoretical predictions for a similar Short Takeoff and Vertical Landing (STOVL) ejector model.
A comparison of theoretical and experimental pressure distributions for two advanced fighter wings
NASA Technical Reports Server (NTRS)
Haney, H. P.; Hicks, R. M.
1981-01-01
A comparison was made between experimental pressure distributions measured during testing of the Vought A-7 fighter and the theoretical predictions of four transonic potential flow codes. Isolated wind and three wing-body codes were used for comparison. All comparisons are for transonic Mach numbers and include both attached and separate flows. In general, the wing-body codes gave better agreement with the experiment than did the isolated wing code but, because of the greater complexity of the geometry, were found to be considerably more expensive and less reliable.
NASA Technical Reports Server (NTRS)
Weissman, D. A.; Li, Fuk
1988-01-01
The ability of theoretical radar cross section (RCS) models to predict the absolute magnitude of the ocean radar cross section under a wide variety of sea and atmospheric conditions was studied using experimental data from the FASINEX Experiment. This consists of RCS data from a Ku-band scatterometer mounted on an aircraft (10 separate flights were conducted), a wide variety of atmospheric measurements (including stress) and sea conditions. Theoretical models are tested. Where discrepancies are observed, revisions are hypothesized and evaluated.
NASA Astrophysics Data System (ADS)
Chandra, Ramesh; Chopra, Inderjit
1992-08-01
The objective of the study was to predict the effect of elastic couplings on the free vibration characteristics of thin-walled composite box beams and to correlate the results with experimental data. The free vibration characteristics of coupled thin-walled composite beams under rotation were determined using the Galerkin method. The theoretical results were found to be in satisfactory agreement with experimental data obtained for graphite/epoxy, kevlar/epoxy, and glass/epoxy composite beams in an in-vacuo test facility at different rotational speeds.
NASA Astrophysics Data System (ADS)
Weissman, D. A.; Li, Fuk
1988-08-01
The ability of theoretical radar cross section (RCS) models to predict the absolute magnitude of the ocean radar cross section under a wide variety of sea and atmospheric conditions was studied using experimental data from the FASINEX Experiment. This consists of RCS data from a Ku-band scatterometer mounted on an aircraft (10 separate flights were conducted), a wide variety of atmospheric measurements (including stress) and sea conditions. Theoretical models are tested. Where discrepancies are observed, revisions are hypothesized and evaluated.
Tredennick, Andrew T.; Bentley, Lisa Patrick; Hanan, Niall P.
2013-01-01
Theoretical models of allometric scaling provide frameworks for understanding and predicting how and why the morphology and function of organisms vary with scale. It remains unclear, however, if the predictions of ‘universal’ scaling models for vascular plants hold across diverse species in variable environments. Phenomena such as competition and disturbance may drive allometric scaling relationships away from theoretical predictions based on an optimized tree. Here, we use a hierarchical Bayesian approach to calculate tree-specific, species-specific, and ‘global’ (i.e. interspecific) scaling exponents for several allometric relationships using tree- and branch-level data harvested from three savanna sites across a rainfall gradient in Mali, West Africa. We use these exponents to provide a rigorous test of three plant scaling models (Metabolic Scaling Theory (MST), Geometric Similarity, and Stress Similarity) in savanna systems. For the allometric relationships we evaluated (diameter vs. length, aboveground mass, stem mass, and leaf mass) the empirically calculated exponents broadly overlapped among species from diverse environments, except for the scaling exponents for length, which increased with tree cover and density. When we compare empirical scaling exponents to the theoretical predictions from the three models we find MST predictions are most consistent with our observed allometries. In those situations where observations are inconsistent with MST we find that departure from theory corresponds with expected tradeoffs related to disturbance and competitive interactions. We hypothesize savanna trees have greater length-scaling exponents than predicted by MST due to an evolutionary tradeoff between fire escape and optimization of mechanical stability and internal resource transport. Future research on the drivers of systematic allometric variation could reconcile the differences between observed scaling relationships in variable ecosystems and those predicted by ideal models such as MST. PMID:23484003
NASA Astrophysics Data System (ADS)
Lawson, Anton E.
2003-11-01
This paper explicates a pattern of scientific argumentation in which scientists respond to causal questions with the generation and test of alternative hypotheses through cycles of hypothetico-predictive argumentation. Hypothetico-predictive arguments are employed to test causal claims that exist on at least two levels (designated stage 4 in which the causal claims are perceptible, and stage 5 in which the causal claims are imperceptible). Origins of the ability to construct and comprehend hypothetico-predictive arguments at the highest level can be traced to pre-verbal reasoning of the sensory-motor child and the gradual internalization of verbally mediated arguments involving nominal, categorical, causal and, finally, theoretical propositions. Presumably, the ability to construct and comprehend hypothetico-predictive arguments (an aspect of procedural knowledge) is necessary for the construction of conceptual knowledge (an aspect of declarative knowledge) because such arguments are used during concept construction and conceptual change. Science instruction that focuses on the generation and debate of hypothetico-predictive arguments should improve students' conceptual understanding and their argumentative/reasoning skills.
Acoustic test and analyses of three advanced turboprop models
NASA Technical Reports Server (NTRS)
Brooks, B. M.; Metzger, F. B.
1980-01-01
Results of acoustic tests of three 62.2 cm (24.5 inch) diameter models of the prop-fan (a small diameter, highly loaded. Multi-bladed variable pitch advanced turboprop) are presented. Results show that there is little difference in the noise produced by unswept and slightly swept designs. However, the model designed for noise reduction produces substantially less noise at test conditions simulating 0.8 Mach number cruise speed or at conditions simulating takeoff and landing. In the near field at cruise conditions the acoustically designed. In the far field at takeoff and landing conditions the acoustically designed model is 5 db quieter than unswept or slightly swept designs. Correlation between noise measurement and theoretical predictions as well as comparisons between measured and predicted acoustic pressure pulses generated by the prop-fan blades are discussed. The general characteristics of the pulses are predicted. Shadowgraph measurements were obtained which showed the location of bow and trailing waves.
Testing gravity with E{sub G}: mapping theory onto observations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Leonard, C. Danielle; Ferreira, Pedro G.; Heymans, Catherine, E-mail: danielle.leonard@physics.ox.ac.uk, E-mail: p.ferreira1@physics.ox.ac.uk, E-mail: heymans@roe.ac.uk
We present a complete derivation of the observationally motivated definition of the modified gravity statistic E{sub G}. Using this expression, we investigate how variations to theory and survey parameters may introduce uncertainty in the general relativistic prediction of E{sub G}. We forecast errors on E{sub G} for measurements using two combinations of upcoming surveys, and find that theoretical uncertainties may dominate for a futuristic measurement. Finally, we compute predictions of E{sub G} under modifications to general relativity in the quasistatic regime, and comment on the pros and cons of using E{sub G} to test gravity with future surveys.
Boundary layer control for airships
NASA Technical Reports Server (NTRS)
Pake, F. A.; Pipitone, S. J.
1975-01-01
An investigation is summarized of the aerodynamic principle of boundary layer control for nonrigid LTA craft. The project included a wind tunnel test on a BLC body of revolution at zero angle of attack. Theoretical analysis is shown to be in excellent agreement with the test data. Methods are evolved for predicting the boundary layer development on a body of revolution and the suction pumping and propulsive power requirements. These methods are used to predict the performance characteristics of a full-scale airship. The analysis indicates that propulsive power reductions of 15 to 25 percent and endurance improvements of 20 to 40 percent may be realized in employing boundary-layer control to nonrigid airships.
FIELD INVESTIGATIONS OF THE DRIFT SHADOW
DOE Office of Scientific and Technical Information (OSTI.GOV)
G. W. Su, T. J. Kneafsey, T. A. Ghezzehei, B. D. Marshall, and P. J. Cook
The ''Drift Shadow'' is defined as the relatively drier region that forms below subsurface cavities or drifts in unsaturated rock. Its existence has been predicted through analytical and numerical models of unsaturated flow. However, these theoretical predictions have not been demonstrated empirically to date. In this project they plan to test the drift shadow concept through field investigations and compare our observations to simulations. Based on modeling studies they have an identified suitable site to perform the study at an inactive mine in a sandstone formation. Pretest modeling studies and preliminary characterization of the site are being used to developmore » the field scale tests.« less
Accuracy Analysis of a Wireless Indoor Positioning System Using Geodetic Methods
NASA Astrophysics Data System (ADS)
Wagner, Przemysław; Woźniak, Marek; Odziemczyk, Waldemar; Pakuła, Dariusz
2017-12-01
Ubisense RTLS is one of the Indoor positioning systems using an Ultra Wide Band. AOA and TDOA methods are used as a principle of positioning. The accuracy of positioning depends primarily on the accuracy of determined angles and distance differences. The paper presents the results of accuracy research which includes a theoretical accuracy prediction and a practical test. Theoretical accuracy was calculated for two variants of system components geometry, assuming the parameters declared by the system manufacturer. Total station measurements were taken as a reference during the practical test. The results of the analysis are presented in a graphical form. A sample implementation (MagMaster) developed by Globema is presented in the final part of the paper.
NASA Technical Reports Server (NTRS)
Albers, J. A.
1973-01-01
Theoretical and experimental internal flow characteristics of two 51-cm-diameter inlets are compared. Theoretical flow characteristics along the inlet surface were obtained from an axisymmetric potential flow and boundary layer analysis. The experimental data were obtained from low-speed tests of a high-bypass-ratio turbofan engine simulator. Comparisons between calculated internal surface pressure distributions and experimental data are presented for a free-system velocity of 45 m/sec and for incidence angles from 0 deg to 50 deg. Analysis of boundary layer separation on the inlet lip at incidence angle is the major emphasis of this report. Theoretical boundary layer shape factors, skin friction coefficients, and velocity profiles in the boundary layer are presented, along with the location of the transition region. Theoretical and experimental separation locations are also discussed.
An, Ni; Zhuang, Bilin; Li, Minglun; Lu, Yuyuan; Wang, Zhen-Gang
2015-08-20
We propose a simple theoretical formula for describing the refractive indices in binary liquid mixtures containing salt ions. Our theory is based on the Clausius-Mossotti equation; it gives the refractive index of the mixture in terms of the refractive indices of the pure liquids and the polarizability of the ionic species, by properly accounting for the volume change upon mixing. The theoretical predictions are tested by extensive experimental measurements of the refractive indices for water-acetonitrile-salt systems for several liquid compositions, different salt species, and a range of salt concentrations. Excellent agreement is obtained in all cases, especially at low salt concentrations, with no fitting parameters. A simplified expression of the refractive index for low salt concentration is also given, which can be the theoretical basis for determination of salt concentration using refractive index measurements.
Prediction model for carbonation depth of concrete subjected to freezing-thawing cycles
NASA Astrophysics Data System (ADS)
Xiao, Qian Hui; Li, Qiang; Guan, Xiao; Xian Zou, Ying
2018-03-01
Through the indoor simulation test of the concrete durability under the coupling effect of freezing-thawing and carbonation, the variation regularity of concrete neutralization depth under freezing-thawing and carbonation was obtained. Based on concrete carbonation mechanism, the relationship between the air diffusion coefficient and porosity in concrete was analyzed and the calculation method of porosity in Portland cement concrete and fly ash cement concrete was investigated, considering the influence of the freezing-thawing damage on the concrete diffusion coefficient. Finally, a prediction model of carbonation depth of concrete under freezing-thawing circumstance was established. The results obtained using this prediction model agreed well with the experimental test results, and provided a theoretical reference and basis for the concrete durability analysis under multi-factor environments.
Psychoticism and disruptive behavior can be also good predictors of school achievement.
Flores-Mendoza, Carmen; Widaman, Keith; Mansur-Alves, Marcela; Bacelar, Tatiane Dias; Saldanha, Renata
2013-01-01
The relations of Gf (Standard Progressive Matrices Raven), Gc (verbal scale of Wechsler Intelligence Scale for Children-Third Version), personality dimensions (Eysenck Personality Questionnaire-Junior Version), and disruptive behavior (TDAH scale) with school achievement (measured by TDE test and PISA test) were investigated. Two samples of students (total N = 534) representing a broad range of socioeconomic status (SES) participated in this study. Path models were conducted. The results demonstrated that (1) in both samples no sex differences related to school achievement were found; (2) in the first sample, after controlling for age and SES differences, Gf and psychoticism predicted (.38 and -.13, respectively) school achievement (measured by TDE test); (3) in the second sample, after controlling for SES differences to which additional measures were administered, Gf and Gc positively predicted (.22 and .40, respectively) school achievement (measured by PISA test). In addition, psychoticism and disruptive behavior also predicted school performance (-.14 and -.28, respectively). Some theoretical and practical implications are discussed.
Solid rocket booster performance evaluation model. Volume 1: Engineering description
NASA Technical Reports Server (NTRS)
1974-01-01
The space shuttle solid rocket booster performance evaluation model (SRB-II) is made up of analytical and functional simulation techniques linked together so that a single pass through the model will predict the performance of the propulsion elements of a space shuttle solid rocket booster. The available options allow the user to predict static test performance, predict nominal and off nominal flight performance, and reconstruct actual flight and static test performance. Options selected by the user are dependent on the data available. These can include data derived from theoretical analysis, small scale motor test data, large motor test data and motor configuration data. The user has several options for output format that include print, cards, tape and plots. Output includes all major performance parameters (Isp, thrust, flowrate, mass accounting and operating pressures) as a function of time as well as calculated single point performance data. The engineering description of SRB-II discusses the engineering and programming fundamentals used, the function of each module, and the limitations of each module.
Driven to distraction: A lack of change gives rise to mind wandering.
Faber, Myrthe; Radvansky, Gabriel A; D'Mello, Sidney K
2018-04-01
How does the dynamic structure of the external world direct attention? We examined the relationship between event structure and attention to test the hypothesis that narrative shifts (both theoretical and perceived) negatively predict attentional lapses. Self-caught instances of mind wandering were collected while 108 participants watched a 32.5 min film called The Red Balloon. We used theoretical codings of situational change and human perceptions of event boundaries to predict mind wandering in 5-s intervals. Our findings suggest a temporal alignment between the structural dynamics of the film and mind wandering reports. Specifically, the number of situational changes and likelihood of perceiving event boundaries in the prior 0-15 s interval negatively predicted mind wandering net of low-level audiovisual features. Thus, mind wandering is less likely to occur when there is more event change, suggesting that narrative shifts keep attention from drifting inwards. Copyright © 2018 Elsevier B.V. All rights reserved.
Hepler, Justin; Albarracin, Dolores
2013-01-01
We hypothesized that individuals may differ in the dispositional tendency to have positive versus negative attitudes, a trait termed the Dispositional Attitude. Across four studies, we developed a 16-item Dispositional Attitude Measure (DAM) and investigated its internal consistency, test-retest reliability, factor structure, convergent validity, discriminant validity, and predictive validity. DAM scores were (a) positively correlated with positive affect traits, curiosity-related traits, and individual pre-existing attitudes, (b) negatively correlated with negative affect traits, and (c) uncorrelated with theoretically unrelated traits. Dispositional attitudes also significantly predicted the valence of novel attitudes while controlling for theoretically relevant traits (such as the big-five and optimism). The dispositional attitude construct represents a new perspective in which attitudes are not simply a function of the properties of the stimuli under consideration, but are also a function of the properties of the evaluator. We discuss the intriguing implications of dispositional attitudes for many areas of research, including attitude formation, persuasion, and behavior prediction. PMID:23586409
Hepler, Justin; Albarracín, Dolores
2013-06-01
We hypothesized that individuals may differ in the dispositional tendency to have positive vs. negative attitudes, a trait termed the dispositional attitude. Across 4 studies, we developed a 16-item Dispositional Attitude Measure (DAM) and investigated its internal consistency, test-retest reliability, factor structure, convergent validity, discriminant validity, and predictive validity. DAM scores were (a) positively correlated with positive affect traits, curiosity-related traits, and individual preexisting attitudes; (b) negatively correlated with negative affect traits; and (c) uncorrelated with theoretically unrelated traits. Dispositional attitudes also significantly predicted the valence of novel attitudes while controlling for theoretically relevant traits (such as the Big 5 and optimism). The dispositional attitude construct represents a new perspective in which attitudes are not simply a function of the properties of the stimuli under consideration, but are also a function of the properties of the evaluator. We discuss the intriguing implications of dispositional attitudes for many areas of research, including attitude formation, persuasion, and behavior prediction. PsycINFO Database Record (c) 2013 APA, all rights reserved.
Smith, Andrew J; Abeyta, Andrew A; Hughes, Michael; Jones, Russell T
2015-03-01
This study tested a conceptual model merging anxiety buffer disruption and social-cognitive theories to predict persistent grief severity among students who lost a close friend, significant other, and/or professor/teacher in tragic university campus shootings. A regression-based path model tested posttraumatic stress (PTS) symptom severity 3 to 4 months postshooting (Time 1) as a predictor of grief severity 1 year postshootings (Time 2), both directly and indirectly through cognitive processes (self-efficacy and disrupted worldview). Results revealed a model that predicted 61% of the variance in Time 2 grief severity. Hypotheses were supported, demonstrating that Time 1 PTS severity indirectly, positively predicted Time 2 grief severity through undermining self-efficacy and more severely disrupting worldview. Findings and theoretical interpretation yield important insights for future research and clinical application. (PsycINFO Database Record (c) 2015 APA, all rights reserved).
Attentive Motion Discrimination Recruits an Area in Inferotemporal Cortex
Stemmann, Heiko
2016-01-01
Attentional selection requires the interplay of multiple brain areas. Theoretical accounts of selective attention predict different areas with different functional properties to support endogenous covert attention. To test these predictions, we devised a demanding attention task requiring motion discrimination and spatial selection and performed whole-brain imaging in macaque monkeys. Attention modulated the early visual cortex, motion-selective dorsal stream areas, the lateral intraparietal area, and the frontal eye fields. This pattern of activation supports early selection, feature-based, and biased-competition attention accounts, as well as the frontoparietal theory of attentional control. While high-level motion-selective dorsal stream areas did not exhibit strong attentional modulation, ventral stream areas V4d and the dorsal posterior inferotemporal cortex (PITd) did. The PITd in fact was, consistently across task variations, the most significantly and most strongly attention-modulated area, even though it did not exhibit signs of motion selectivity. Thus the recruitment of the PITd in attention tasks involving different kinds of motion analysis is not predicted by any theoretical account of attention. These functional data, together with known anatomical connections, suggest a general and possibly critical role of the PITd in attentional selection. SIGNIFICANCE STATEMENT Attention is the key cognitive function that selects sensory information relevant to the current goals, relegating other information to the shadows of consciousness. To better understand the neural mechanisms of this interplay between sensory processing and internal cognitive state, we must learn more about the brain areas supporting attentional selection. Here, to test theoretical accounts of attentional selection, we used a novel task requiring sustained attention to motion. We found that, surprisingly, among the most strongly attention-modulated areas is one that is neither selective for the sensory feature relevant for current goals nor one hitherto thought to be involved in attentional control. This discovery suggests a need for an extension of current theoretical accounts of the brain circuits for attentional selection. PMID:27881778
Critical Buckling Pressure in Mouse Carotid Arteries with Altered Elastic Fibers
Luetkemeyer, Callan M.; James, Rhys H.; Devarakonda, Siva Teja; Le, Victoria P.; Liu, Qin; Han, Hai-Chao; Wagenseil, Jessica E.
2015-01-01
Arteries can buckle axially under applied critical buckling pressure due to a mechanical instability. Buckling can cause arterial tortuosity leading to flow irregularities and stroke. Genetic mutations in elastic fiber proteins are associated with arterial tortuosity in humans and mice, and may be the result of alterations in critical buckling pressure. Hence, the objective of this study is to investigate how genetic defects in elastic fibers affect buckling pressure. We use mouse models of human disease with reduced amounts of elastin (Eln+/−) and with defects in elastic fiber assembly due to the absence of fibulin-5 (Fbln5−/−). We find that Eln+/− arteries have reduced buckling pressure compared to their wild-type controls. Fbln5−/− arteries have similar buckling pressure to wild-type at low axial stretch, but increased buckling pressure at high stretch. We fit material parameters to mechanical test data for Eln+/−, Fbln5−/− and wild-type arteries using Fung and four-fiber strain energy functions. Fitted parameters are used to predict theoretical buckling pressure based on equilibrium of an inflated, buckled, thick-walled cylinder. In general, the theoretical predictions underestimate the buckling pressure at low axial stretch and overestimate the buckling pressure at high stretch. The theoretical predictions with both models replicate the increased buckling pressure at high stretch for Fbln5−/− arteries, but the four-fiber model predictions best match the experimental trends in buckling pressure changes with axial stretch. This study provides experimental and theoretical methods for further investigating the influence of genetic mutations in elastic fibers on buckling behavior and the development of arterial tortuosity. PMID:25771258
NASA Technical Reports Server (NTRS)
Gallo, Christopher A.; Agui, Juan H.; Creager, Colin M.; Oravec, Heather A.
2012-01-01
An Excavation System Model has been written to simulate the collection and transportation of regolith on the moon. The calculations in this model include an estimation of the forces on the digging tool as a result of excavation into the regolith. Verification testing has been performed and the forces recorded from this testing were compared to the calculated theoretical data. The Northern Centre for Advanced Technology Inc. rovers were tested at the NASA Glenn Research Center Simulated Lunar Operations facility. This testing was in support of the In-Situ Resource Utilization program Innovative Partnership Program. Testing occurred in soils developed at the Glenn Research Center which are a mixture of different types of sands and whose soil properties have been well characterized. This testing is part of an ongoing correlation of actual field test data to the blade forces calculated by the Excavation System Model. The results from this series of tests compared reasonably with the predicted values from the code.
Combine experimental and theoretical investigation on an alkaloid-Dimethylisoborreverine
NASA Astrophysics Data System (ADS)
Singh, Swapnil; Singh, Harshita; Karthick, T.; Agarwal, Parag; Erande, Rohan D.; Dethe, Dattatraya H.; Tandon, Poonam
2016-01-01
A combined experimental (FT-IR, 1H and 13C NMR) and theoretical approach is used to study the structure and properties of antimalarial drug dimethylisoborreverine (DMIB). Conformational analysis, has been performed by plotting one dimensional potential energy curve that was computed using density functional theory (DFT) with B3LYP/6-31G method and predicted conformer A1 as the most stable conformer. After full geometry optimization, harmonic wavenumbers were computed for conformer A1 at the DFT/B3LYP/6-311++G(d,P) level. A complete vibrational assignment of all the vibrational modes have been performed on the bases of the potential energy distribution (PED) and theoretical results were found to be in good agreement with the observed data. To predict the solvent effect, the UV-Vis spectra were calculated in different solvents by polarizable continuum model using TD-DFT method. Molecular docking studies were performed to test the biological activity of the sample using SWISSDOCK web server and Hex 8.0.0 software. The molecular electrostatic potential (MESP) was plotted to identify the reactive sites of the molecule. Natural bond orbital (NBO) analysis was performed to get a deep insight of intramolecular charge transfer. Thermodynamical parameters were calculated to predict the direction of chemical reaction.
Bayesian Learning and the Psychology of Rule Induction
ERIC Educational Resources Information Center
Endress, Ansgar D.
2013-01-01
In recent years, Bayesian learning models have been applied to an increasing variety of domains. While such models have been criticized on theoretical grounds, the underlying assumptions and predictions are rarely made concrete and tested experimentally. Here, I use Frank and Tenenbaum's (2011) Bayesian model of rule-learning as a case study to…
The Acquisition of Chinese Relative Clauses: Contrasting Two Theoretical Approaches
ERIC Educational Resources Information Center
Hu, Shenai; Gavarró, Anna; Vernice, Mirta; Guasti, Maria Teresa
2016-01-01
This study examines the comprehension of relative clauses by Chinese-speaking children, and evaluates the validity of the predictions of the Dependency Locality Theory (Gibson, 1998, 2000) and the Relativized Minimality approach (Friedmann, Belletti & Rizzi, 2009). One hundred and twenty children from three to eight years of age were tested by…
ERIC Educational Resources Information Center
Wood, Alex M.; Linley, P. Alex; Maltby, John; Baliousis, Michael; Joseph, Stephen
2008-01-01
This article describes the development of a measure of dispositional authenticity and tests whether authenticity is related to well-being, as predicted by several counseling psychology perspectives. Scales were designed to measure a tripartite conception of authenticity, comprising self-alienation, authentic living, and accepting external…
The Impact of Cultural Context on Brazilian Adolescents' Sexual Practices
ERIC Educational Resources Information Center
Levinson, Ruth Andrea; Sadigursky, Clesia; Erchak, Gerald M.
2004-01-01
AIDS prevention research has demonstrated that theoretically driven HIV prevention programs can be tailored to specific cultures. Further, condom self-efficacy and contraceptive self-efficacy scales have been tested in the U.S. and been shown to predict condom and contraceptive use. Results of condom and contraceptive self-efficacy studies have…
ERIC Educational Resources Information Center
Phan, Huy P.
2014-01-01
Existing research has yielded evidence to indicate that the expectancy-value theoretical model predicts students' learning in various achievement contexts. Achievement values and self-efficacy expectations, for example, have been found to exert positive effects on cognitive process and academic achievement outcomes. We tested a conceptual model…
Thermal Response Of Composite Insulation
NASA Technical Reports Server (NTRS)
Stewart, David A.; Leiser, Daniel B.; Smith, Marnell; Kolodziej, Paul
1988-01-01
Engineering model gives useful predictions. Pair of reports presents theoretical and experimental analyses of thermal responses of multiple-component, lightweight, porous, ceramic insulators. Particular materials examined destined for use in Space Shuttle thermal protection system, test methods and heat-transfer theory useful to chemical, metallurgical, and ceramic engineers needing to calculate transient thermal responses of refractory composites.
ERIC Educational Resources Information Center
Whedon, Margaret; Perry, Nicole B.; Calkins, Susan D.; Bell, Martha Ann
2016-01-01
Theoretical perspectives of cognitive development have maintained that functional integration of the prefrontal cortex across infancy underlies the emergence of attentional control and higher cognitive abilities in early childhood. To investigate these proposed relations, we tested whether functional integration of prefrontal regions across the…
ERIC Educational Resources Information Center
Bazargan, Mohsen; Stein, Judith A.; Bazargan-Hejazi, Shahrzad; Hindman, David W.
2010-01-01
Background: Testing, refining, and tailoring theoretical approaches that are hypothesized to reduce sexual risk behaviors among adolescent subpopulations is an important task. Relatively little is known about the relationship between components of the information-motivation-behavior (IMB) model and sexual behaviors among underage minority youth.…
An Empirical Test of Ecodevelopmental Theory in Predicting HIV Risk Behaviors among Hispanic Youth
ERIC Educational Resources Information Center
Prado, Guillermo; Huang, Shi; Maldonado-Molina, Mildred; Bandiera, Frank; Schwartz, Seth J.; de la Vega, Pura; Brown, C. Hendricks; Pantin, Hilda
2010-01-01
Ecodevelopmental theory is a theoretical framework used to explain the interplay among risk and protective processes associated with HIV risk behaviors among adolescents. Although ecodevelopmentally based interventions have been found to be efficacious in preventing HIV risk behaviors among Hispanic youth, this theory has not yet been directly…
"What, Me Ashamed?" Shame Management and School Bullying
ERIC Educational Resources Information Center
Ahmed, Eliza; Braithwaite, Valerie
2004-01-01
This study focuses on the prediction of self-initiated bullying from family, school, personality, and shame management variables. Reintegrative shaming theory provided a theoretical framework for data gathered from students (n = 1,401) and their parents (n = 978). To test the importance of shame management in relation to bullying, the MOSS-SASD…
Response Generalization in Apraxia of Speech Treatments: Taking Another Look.
ERIC Educational Resources Information Center
Ballard, Kirrie J.
2001-01-01
This article presents a critical review and reanalysis of response generalization effects in studies of treatment efficacy in apraxia of speech. The discussion focuses on the influence of the theoretical basis used to develop hypotheses and select behavior to test predictions, the complexity of the treatment task/s, and patient characteristics.…
Parenting Style and Adolescents' School Performance in Mainland China
ERIC Educational Resources Information Center
Kang, Yanrong; Moore, Joyce
2011-01-01
Parenting style, as a widely studied topic, has been used by researchers and educators in the US to predict students' academic achievements. Despite its theoretical and practical significance, no much work has been conducted to test the generalizability of parenting research framed in the Western culture to the Chinese population. Parenting styles…
Selective mode excitation in finite size plasma crystals by diffusely reflected laser light
NASA Astrophysics Data System (ADS)
Schablinski, Jan; Block, Dietmar
2015-02-01
The possibility to use diffuse reflections of a laser beam to exert a force on levitating dust particles is studied experimentally. Measurements and theoretical predictions are found to be in good agreement. Further, the method is applied to test the selective excitation of breathing-like modes in finite dust clusters.
Task Complexity, Language-Related Episodes, and Production of L2 Spanish Vowels
ERIC Educational Resources Information Center
Solon, Megan; Long, Avizia Y.; Gurzynski-Weiss, Laura
2017-01-01
This study tests the theoretical predictions regarding effects of increasing task complexity (Robinson, 2001a, 2001b, 2007, 2010; Robinson & Gilabert, 2007) for second language (L2) pronunciation. Specifically, we examine whether more complex tasks (a) lead to greater incidence of pronunciation-focused language-related episodes (LREs) and (b)…
The Relationship between Leisure and Life Satisfaction: Application of Activity and Need Theory
ERIC Educational Resources Information Center
Rodriguez, Ariel; Latkova, Pavlina; Sun, Ya-Yen
2008-01-01
The purpose of this study was to better understand the complex relationship between leisure and life satisfaction. Components of two distinct, but potentially integrative, theoretical frameworks (i.e., activity theory and need theory) predicting the relationship between leisure and life satisfaction were tested with a sample of residents from a…
USDA-ARS?s Scientific Manuscript database
Theoretical models predict that dryland ecosystems can cross critical thresholds after which vegetation loss is independent of initial drivers, but experimental data are nonexistent. We used a long-term (13 year) pulse-perturbation experiment featuring heavy grazing and shrub removal to determine i...
Optimal Weight Assignment for a Chinese Signature File.
ERIC Educational Resources Information Center
Liang, Tyne; And Others
1996-01-01
Investigates the performance of a character-based Chinese text retrieval scheme in which monogram keys and bigram keys are encoded into document signatures. Tests and verifies the theoretical predictions of the optimal weight assignments and the minimal false hit rate in experiments using a real Chinese corpus for disyllabic queries of different…
Longitudinal Examination of Optimism, Personal Self-Efficacy and Student Well-Being: A Path Analysis
ERIC Educational Resources Information Center
Phan, Huy P.
2016-01-01
The present longitudinal study, based on existing theoretical tenets, explored a conceptual model that depicted four major orientations: optimism, self-efficacy, and academic well-being. An important question for consideration, in this case, involved the testing of different untested trajectories that could explain and predict individuals'…
A Protective Factors Model for Alcohol Abuse and Suicide Prevention among Alaska Native Youth
Allen, James; Mohatt, Gerald V.; Fok, Carlotta Ching Ting; Henry, David; Burkett, Rebekah
2014-01-01
This study provides an empirical test of a culturally grounded theoretical model for prevention of alcohol abuse and suicide risk with Alaska Native youth, using a promising set of culturally appropriate measures for the study of the process of change and outcome. This model is derived from qualitative work that generated an heuristic model of protective factors from alcohol (Allen at al., 2006; Mohatt, Hazel et al., 2004; Mohatt, Rasmus et al., 2004). Participants included 413 rural Alaska Native youth ages 12-18 who assisted in testing a predictive model of Reasons for Life and Reflective Processes about alcohol abuse consequences as co-occurring outcomes. Specific individual, family, peer, and community level protective factor variables predicted these outcomes. Results suggest prominent roles for these predictor variables as intermediate prevention strategy target variables in a theoretical model for a multilevel intervention. The model guides understanding of underlying change processes in an intervention to increase the ultimate outcome variables of Reasons for Life and Reflective Processes regarding the consequences of alcohol abuse. PMID:24952249
NASA Astrophysics Data System (ADS)
Sévellec, Florian; Dijkstra, Henk A.; Drijfhout, Sybren S.; Germe, Agathe
2017-11-01
In this study, the relation between two approaches to assess the ocean predictability on interannual to decadal time scales is investigated. The first pragmatic approach consists of sampling the initial condition uncertainty and assess the predictability through the divergence of this ensemble in time. The second approach is provided by a theoretical framework to determine error growth by estimating optimal linear growing modes. In this paper, it is shown that under the assumption of linearized dynamics and normal distributions of the uncertainty, the exact quantitative spread of ensemble can be determined from the theoretical framework. This spread is at least an order of magnitude less expensive to compute than the approximate solution given by the pragmatic approach. This result is applied to a state-of-the-art Ocean General Circulation Model to assess the predictability in the North Atlantic of four typical oceanic metrics: the strength of the Atlantic Meridional Overturning Circulation (AMOC), the intensity of its heat transport, the two-dimensional spatially-averaged Sea Surface Temperature (SST) over the North Atlantic, and the three-dimensional spatially-averaged temperature in the North Atlantic. For all tested metrics, except for SST, ˜ 75% of the total uncertainty on interannual time scales can be attributed to oceanic initial condition uncertainty rather than atmospheric stochastic forcing. The theoretical method also provide the sensitivity pattern to the initial condition uncertainty, allowing for targeted measurements to improve the skill of the prediction. It is suggested that a relatively small fleet of several autonomous underwater vehicles can reduce the uncertainty in AMOC strength prediction by 70% for 1-5 years lead times.
Clark, Timothy D; Roche, Dominique G; Binning, Sandra A; Speers-Roesch, Ben; Sundin, Josefin
2017-10-01
Theoretical models predict that ocean acidification, caused by increased dissolved CO 2 , will reduce the maximum thermal limits of fishes, thereby increasing their vulnerability to rising ocean temperatures and transient heatwaves. Here, we tested this prediction in three species of damselfishes on the Great Barrier Reef, Australia. Maximum thermal limits were quantified using critical thermal maxima (CT max ) tests following acclimation to either present-day or end-of-century levels of CO 2 for coral reef environments (∼500 or ∼1000 µatm, respectively). While species differed significantly in their thermal limits, whereby Dischistodus perspicillatus exhibited greater CT max (37.88±0.03°C; N =47) than Dascyllus aruanus (37.68±0.02°C; N =85) and Acanthochromis polyacanthus (36.58±0.02°C; N =63), end-of-century CO 2 had no effect ( D. aruanus ) or a slightly positive effect (increase in CT max of 0.16°C in D. perspicillatus and 0.21°C in A. polyacanthus ) on CT max Contrary to expectations, early-stage juveniles were equally as resilient to CO 2 as larger conspecifics, and CT max was higher at smaller body sizes in two species. These findings suggest that ocean acidification will not impair the maximum thermal limits of reef fishes, and they highlight the critical role of experimental biology in testing predictions of theoretical models forecasting the consequences of environmental change. © 2017. Published by The Company of Biologists Ltd.
Daschewski, M; Kreutzbruck, M; Prager, J
2015-12-01
In this work we experimentally verify the theoretical prediction of the recently published Energy Density Fluctuation Model (EDF-model) of thermo-acoustic sound generation. Particularly, we investigate experimentally the influence of thermal inertia of an electrically conductive film on the efficiency of thermal airborne ultrasound generation predicted by the EDF-model. Unlike widely used theories, the EDF-model predicts that the thermal inertia of the electrically conductive film is a frequency-dependent parameter. Its influence grows non-linearly with the increase of excitation frequency and reduces the efficiency of the ultrasound generation. Thus, this parameter is the major limiting factor for the efficient thermal airborne ultrasound generation in the MHz-range. To verify this theoretical prediction experimentally, five thermo-acoustic emitter samples consisting of Indium-Tin-Oxide (ITO) coatings of different thicknesses (from 65 nm to 1.44 μm) on quartz glass substrates were tested for airborne ultrasound generation in a frequency range from 10 kHz to 800 kHz. For the measurement of thermally generated sound pressures a laser Doppler vibrometer combined with a 12 μm thin polyethylene foil was used as the sound pressure detector. All tested thermo-acoustic emitter samples showed a resonance-free frequency response in the entire tested frequency range. The thermal inertia of the heat producing film acts as a low-pass filter and reduces the generated sound pressure with the increasing excitation frequency and the ITO film thickness. The difference of generated sound pressure levels for samples with 65 nm and 1.44 μm thickness is in the order of about 6 dB at 50 kHz and of about 12 dB at 500 kHz. A comparison of sound pressure levels measured experimentally and those predicted by the EDF-model shows for all tested emitter samples a relative error of less than ±6%. Thus, experimental results confirm the prediction of the EDF-model and show that the model can be applied for design and optimization of thermo-acoustic airborne ultrasound emitters. Copyright © 2015 Elsevier B.V. All rights reserved.
Space Shuttle Main Engine performance analysis
NASA Technical Reports Server (NTRS)
Santi, L. Michael
1993-01-01
For a number of years, NASA has relied primarily upon periodically updated versions of Rocketdyne's power balance model (PBM) to provide space shuttle main engine (SSME) steady-state performance prediction. A recent computational study indicated that PBM predictions do not satisfy fundamental energy conservation principles. More recently, SSME test results provided by the Technology Test Bed (TTB) program have indicated significant discrepancies between PBM flow and temperature predictions and TTB observations. Results of these investigations have diminished confidence in the predictions provided by PBM, and motivated the development of new computational tools for supporting SSME performance analysis. A multivariate least squares regression algorithm was developed and implemented during this effort in order to efficiently characterize TTB data. This procedure, called the 'gains model,' was used to approximate the variation of SSME performance parameters such as flow rate, pressure, temperature, speed, and assorted hardware characteristics in terms of six assumed independent influences. These six influences were engine power level, mixture ratio, fuel inlet pressure and temperature, and oxidizer inlet pressure and temperature. A BFGS optimization algorithm provided the base procedure for determining regression coefficients for both linear and full quadratic approximations of parameter variation. Statistical information relative to data deviation from regression derived relations was also computed. A new strategy for integrating test data with theoretical performance prediction was also investigated. The current integration procedure employed by PBM treats test data as pristine and adjusts hardware characteristics in a heuristic manner to achieve engine balance. Within PBM, this integration procedure is called 'data reduction.' By contrast, the new data integration procedure, termed 'reconciliation,' uses mathematical optimization techniques, and requires both measurement and balance uncertainty estimates. The reconciler attempts to select operational parameters that minimize the difference between theoretical prediction and observation. Selected values are further constrained to fall within measurement uncertainty limits and to satisfy fundamental physical relations (mass conservation, energy conservation, pressure drop relations, etc.) within uncertainty estimates for all SSME subsystems. The parameter selection problem described above is a traditional nonlinear programming problem. The reconciler employs a mixed penalty method to determine optimum values of SSME operating parameters associated with this problem formulation.
Atahan-Evrenk, Sule; Aspuru-Guzik, Alán
2014-01-01
The theoretical prediction and characterization of the solid-state structure of organic semiconductors has tremendous potential for the discovery of new high performance materials. To date, the theoretical analysis mostly relied on the availability of crystal structures obtained through X-ray diffraction. However, the theoretical prediction of the crystal structures of organic semiconductor molecules remains a challenge. This review highlights some of the recent advances in the determination of structure-property relationships of the known organic semiconductor single-crystals and summarizes a few available studies on the prediction of the crystal structures of p-type organic semiconductors for transistor applications.
Empirical approaches to metacommunities: a review and comparison with theory.
Logue, Jürg B; Mouquet, Nicolas; Peter, Hannes; Hillebrand, Helmut
2011-09-01
Metacommunity theory has advanced understanding of how spatial dynamics and local interactions shape community structure and biodiversity. Here, we review empirical approaches to metacommunities, both observational and experimental, pertaining to how well they relate to and test theoretical metacommunity paradigms and how well they capture the realities of natural ecosystems. First, we show that the species-sorting and mass-effects paradigms are the most commonly tested and supported paradigms. Second, the dynamics observed can often be ascribed to two or more of the four non-exclusive paradigms. Third, empirical approaches relate only weakly to the concise assumptions and predictions made by the paradigms. Consequently, we suggest major avenues of improvement for empirical metacommunity approaches, including the integration across theoretical approaches and the incorporation of evolutionary and meta-ecosystem dynamics. We hope for metacommunity ecology to thereby bridge existing gaps between empirical and theoretical work, thus becoming a more powerful framework to understand dynamics across ecosystems. Copyright © 2011 Elsevier Ltd. All rights reserved.
Nonlinear elasticity in rocks: A comprehensive three-dimensional description
Lott, Martin; Remillieux, Marcel; Garnier, Vincent; ...
2017-07-17
Here we study theoretically and experimentally the mechanisms of nonlinear and nonequilibrium dynamics in geomaterials through dynamic acoustoelasticity testing. In the proposed theoretical formulation, the classical theory of nonlinear elasticity is extended to include the effects of conditioning. This formulation is adapted to the context of dynamic acoustoelasticity testing in which a low-frequency “pump” wave induces a strain field in the sample and modulates the propagation of a high-frequency “probe” wave. Experiments are conducted to validate the formulation in a long thin bar of Berea sandstone. Several configurations of the pump and probe are examined: the pump successively consists ofmore » the first longitudinal and first torsional mode of vibration of the sample while the probe is successively based on (pressure) $P$ and (shear) $S$ waves. The theoretical predictions reproduce many features of the elastic response observed experimentally, in particular, the coupling between nonlinear and nonequilibrium dynamics and the three-dimensional effects resulting from the tensorial nature of elasticity.« less
Aissa, Oualid; Moulahoum, Samir; Colak, Ilhami; Babes, Badreddine; Kabache, Nadir
2017-10-12
This paper discusses the use of the concept of classical and predictive direct power control for shunt active power filter function. These strategies are used to improve the active power filter performance by compensation of the reactive power and the elimination of the harmonic currents drawn by non-linear loads. A theoretical analysis followed by a simulation using MATLAB/Simulink software for the studied techniques has been established. Moreover, two test benches have been carried out using the dSPACE card 1104 for the classic and predictive DPC control to evaluate the studied methods in real time. Obtained results are presented and compared in this paper to confirm the superiority of the predictive technique. To overcome the pollution problems caused by the consumption of fossil fuels, renewable energies are the alternatives recommended to ensure green energy. In the same context, the tested predictive filter can easily be supplied by a renewable energy source that will give its impact to enhance the power quality.
NASA Astrophysics Data System (ADS)
Ku, C.-P. Roger; Heshmat, Hooshang
1994-07-01
Compliant foil bearings operate on either gas or liquid, which makes them very attractive for use in extreme environments such as in high-temperature aircraft turbine engines and cryogenic turbopumps. However, a lack of analytical models to predict the dynamic characteristics of foil bearings forces the bearing designer to rely on prototype testing, which is time-consuming and expensive. In this paper, the authors present a theoretical model to predict the structural stiffness and damping coefficients of the bump foil strip in a journal bearing or damper. Stiffness is calculated based on the perturbation of the journal center with respect to its static equilibrium position. The equivalent viscous damping coefficients are determined based on the area of a closed hysteresis loop of the journal center motion. The authors found, theoretically, that the energy dissipated from this loop was mostly contributed by the frictional motion between contact surfaces. In addition, the source and mechanism of the nonlinear behavior of the bump foil strips were examined. With the introduction of this enhanced model, the analytical tools are now available for the design of compliant foil bearings.
Nandi, Sisir; Monesi, Alessandro; Drgan, Viktor; Merzel, Franci; Novič, Marjana
2013-10-30
In the present study, we show the correlation of quantum chemical structural descriptors with the activation barriers of the Diels-Alder ligations. A set of 72 non-catalysed Diels-Alder reactions were subjected to quantitative structure-activation barrier relationship (QSABR) under the framework of theoretical quantum chemical descriptors calculated solely from the structures of diene and dienophile reactants. Experimental activation barrier data were obtained from literature. Descriptors were computed using Hartree-Fock theory using 6-31G(d) basis set as implemented in Gaussian 09 software. Variable selection and model development were carried out by stepwise multiple linear regression methodology. Predictive performance of the quantitative structure-activation barrier relationship (QSABR) model was assessed by training and test set concept and by calculating leave-one-out cross-validated Q2 and predictive R2 values. The QSABR model can explain and predict 86.5% and 80% of the variances, respectively, in the activation energy barrier training data. Alternatively, a neural network model based on back propagation of errors was developed to assess the nonlinearity of the sought correlations between theoretical descriptors and experimental reaction barriers. A reasonable predictability for the activation barrier of the test set reactions was obtained, which enabled an exploration and interpretation of the significant variables responsible for Diels-Alder interaction between dienes and dienophiles. Thus, studies in the direction of QSABR modelling that provide efficient and fast prediction of activation barriers of the Diels-Alder reactions turn out to be a meaningful alternative to transition state theory based computation.
Li, Jie; Stroebe, Magaret; Chan, Cecilia L W; Chow, Amy Y M
2017-06-01
The rationale, development, and validation of the Bereavement Guilt Scale (BGS) are described in this article. The BGS was based on a theoretically developed, multidimensional conceptualization of guilt. Part 1 describes the generation of the item pool, derived from in-depth interviews, and review of the scientific literature. Part 2 details statistical analyses for further item selection (Sample 1, N = 273). Part 3 covers the psychometric properties of the emergent-BGS (Sample 2, N = 600, and Sample 3, N = 479). Confirmatory factor analysis indicated that a five-factor model fit the data best. Correlations of BGS scores with depression, anxiety, self-esteem, self-forgiveness, and mode of death were consistent with theoretical predictions, supporting the construct validity of the measure. The internal consistency and test-retest reliability were also supported. Thus, initial testing or examination suggests that the BGS is a valid tool to assess multiple components of bereavement guilt. Further psychometric testing across cultures is recommended.
NASA Technical Reports Server (NTRS)
Wolowicz, C. H.; Yancey, R. B.
1973-01-01
Preliminary correlations of flight-determined and predicted stability and control characteristics of the XB-70-1 reported in NASA TN D-4578 were subject to uncertainties in several areas which necessitated a review of prediction techniques particularly for the longitudinal characteristics. Reevaluation and updating of the original predictions, including aeroelastic corrections, for six specific flight-test conditions resulted in improved correlations of static pitch stability with flight data. The original predictions for the pitch-damping derivative, on the other hand, showed better correlation with flight data than the updated predictions. It appears that additional study is required in the application of aeroelastic corrections to rigid model wind-tunnel data and the theoretical determination of dynamic derivatives for this class of aircraft.
With or without you: predictive coding and Bayesian inference in the brain
Aitchison, Laurence; Lengyel, Máté
2018-01-01
Two theoretical ideas have emerged recently with the ambition to provide a unifying functional explanation of neural population coding and dynamics: predictive coding and Bayesian inference. Here, we describe the two theories and their combination into a single framework: Bayesian predictive coding. We clarify how the two theories can be distinguished, despite sharing core computational concepts and addressing an overlapping set of empirical phenomena. We argue that predictive coding is an algorithmic / representational motif that can serve several different computational goals of which Bayesian inference is but one. Conversely, while Bayesian inference can utilize predictive coding, it can also be realized by a variety of other representations. We critically evaluate the experimental evidence supporting Bayesian predictive coding and discuss how to test it more directly. PMID:28942084
Fatigue life prediction of liquid rocket engine combustor with subscale test verification
NASA Astrophysics Data System (ADS)
Sung, In-Kyung
Reusable rocket systems such as the Space Shuttle introduced a new era in propulsion system design for economic feasibility. Practical reusable systems require an order of magnitude increase in life. To achieve this improved methods are needed to assess failure mechanisms and to predict life cycles of rocket combustor. A general goal of the research was to demonstrate the use of subscale rocket combustor prototype in a cost-effective test program. Life limiting factors and metal behaviors under repeated loads were surveyed and reviewed. The life prediction theories are presented, with an emphasis on studies that used subscale test hardware for model validation. From this review, low cycle fatigue (LCF) and creep-fatigue interaction (ratcheting) were identified as the main life limiting factors of the combustor. Several life prediction methods such as conventional and advanced viscoplastic models were used to predict life cycle due to low cycle thermal stress, transient effects, and creep rupture damage. Creep-fatigue interaction and cyclic hardening were also investigated. A prediction method based on 2D beam theory was modified using 3D plate deformation theory to provide an extended prediction method. For experimental validation two small scale annular plug nozzle thrusters were designed, built and tested. The test article was composed of a water-cooled liner, plug annular nozzle and 200 psia precombustor that used decomposed hydrogen peroxide as the oxidizer and JP-8 as the fuel. The first combustor was tested cyclically at the Advanced Propellants and Combustion Laboratory at Purdue University. Testing was stopped after 140 cycles due to an unpredicted failure mechanism due to an increasing hot spot in the location where failure was predicted. A second combustor was designed to avoid the previous failure, however, it was over pressurized and deformed beyond repair during cold-flow test. The test results are discussed and compared to the analytical and numerical predictions. A detailed comparison was not performed, however, due to the lack of test data resulting from a failure of the test article. Some theoretical and experimental aspects such as fin effect and round corner were found to reduce the discrepancy between prediction and test results.
Diamond, G M; More, D L; Hawkins, A G; Soucar, E
1995-02-01
The recent article by Stephen T. Black (1993) comparing genuine suicide notes with simulated notes is examined here. This article corrected a sampling error made in the original study by E. S. Shneidman and N. Farberow (1957), but Black's design suffers from theoretical and methodological problems that render it uninterpretable: First, no theoretical background is elaborated, and no hypotheses are offered. Second, no constructs are operationalized, and no predictions are tested. In the present article, the operational design is critiqued, and then it is suggested that the study of suicide notes in this fashion should cease.
Accuracy Analysis of a Box-wing Theoretical SRP Model
NASA Astrophysics Data System (ADS)
Wang, Xiaoya; Hu, Xiaogong; Zhao, Qunhe; Guo, Rui
2016-07-01
For Beidou satellite navigation system (BDS) a high accuracy SRP model is necessary for high precise applications especially with Global BDS establishment in future. The BDS accuracy for broadcast ephemeris need be improved. So, a box-wing theoretical SRP model with fine structure and adding conical shadow factor of earth and moon were established. We verified this SRP model by the GPS Block IIF satellites. The calculation was done with the data of PRN 1, 24, 25, 27 satellites. The results show that the physical SRP model for POD and forecast for GPS IIF satellite has higher accuracy with respect to Bern empirical model. The 3D-RMS of orbit is about 20 centimeters. The POD accuracy for both models is similar but the prediction accuracy with the physical SRP model is more than doubled. We tested 1-day 3-day and 7-day orbit prediction. The longer is the prediction arc length, the more significant is the improvement. The orbit prediction accuracy with the physical SRP model for 1-day, 3-day and 7-day arc length are 0.4m, 2.0m, 10.0m respectively. But they are 0.9m, 5.5m and 30m with Bern empirical model respectively. We apply this means to the BDS and give out a SRP model for Beidou satellites. Then we test and verify the model with Beidou data of one month only for test. Initial results show the model is good but needs more data for verification and improvement. The orbit residual RMS is similar to that with our empirical force model which only estimate the force for along track, across track direction and y-bias. But the orbit overlap and SLR observation evaluation show some improvement. The remaining empirical force is reduced significantly for present Beidou constellation.
Generalized role for the cerebellum in encoding internal models: evidence from semantic processing.
Moberget, Torgeir; Gullesen, Eva Hilland; Andersson, Stein; Ivry, Richard B; Endestad, Tor
2014-02-19
The striking homogeneity of cerebellar microanatomy is strongly suggestive of a corresponding uniformity of function. Consequently, theoretical models of the cerebellum's role in motor control should offer important clues regarding cerebellar contributions to cognition. One such influential theory holds that the cerebellum encodes internal models, neural representations of the context-specific dynamic properties of an object, to facilitate predictive control when manipulating the object. The present study examined whether this theoretical construct can shed light on the contribution of the cerebellum to language processing. We reasoned that the cerebellum might perform a similar coordinative function when the context provided by the initial part of a sentence can be highly predictive of the end of the sentence. Using functional MRI in humans we tested two predictions derived from this hypothesis, building on previous neuroimaging studies of internal models in motor control. First, focal cerebellar activation-reflecting the operation of acquired internal models-should be enhanced when the linguistic context leads terminal words to be predictable. Second, more widespread activation should be observed when such predictions are violated, reflecting the processing of error signals that can be used to update internal models. Both predictions were confirmed, with predictability and prediction violations associated with increased blood oxygenation level-dependent signal in the posterior cerebellum (Crus I/II). Our results provide further evidence for cerebellar involvement in predictive language processing and suggest that the notion of cerebellar internal models may be extended to the language domain.
Castiel, L D
1999-01-01
The author analyzes the underlying theoretical aspects in the construction of the molecular watershed of epidemiology and the concept of genetic risk, focusing on issues raised by contemporary reality: new technologies, globalization, proliferation of communications strategies, and the dilution of identity matrices. He discusses problems pertaining to the establishment of such new interdisciplinary fields as molecular epidemiology and molecular genetics. Finally, he analyzes the repercussions of the social communication of genetic content, especially as related to predictive genetic tests and cloning of animals, based on triumphal, deterministic metaphors sustaining beliefs relating to the existence and supremacy of concepts such as 'purity', 'essence', and 'unification' of rational, integrated 'I's/egos'.
Swanson, H L
1987-01-01
Three theoretical models (additive, independence, maximum rule) that characterize and predict the influence of independent hemispheric resources on learning-disabled and skilled readers' simultaneous processing were tested. Predictions related to word recall performance during simultaneous encoding conditions (dichotic listening task) were made from unilateral (dichotic listening task) presentations. The maximum rule model best characterized both ability groups in that simultaneous encoding produced no better recall than unilateral presentations. While the results support the hypothesis that both ability groups use similar processes in the combining of hemispheric resources (i.e., weak/dominant processing), ability group differences do occur in the coordination of such resources.
Mand, Cara; Gillam, Lynn; Delatycki, Martin B; Duncan, Rony E
2012-09-01
Predictive genetic testing is now routinely offered to asymptomatic adults at risk for genetic disease. However, testing of minors at risk for adult-onset conditions, where no treatment or preventive intervention exists, has evoked greater controversy and inspired a debate spanning two decades. This review aims to provide a detailed longitudinal analysis and concludes by examining the debate's current status and prospects for the future. Fifty-three relevant theoretical papers published between 1990 and December 2010 were identified, and interpretative content analysis was employed to catalogue discrete arguments within these papers. Novel conclusions were drawn from this review. While the debate's first voices were raised in opposition of testing and their arguments have retained currency over many years, arguments in favour of testing, which appeared sporadically at first, have gained momentum more recently. Most arguments on both sides are testable empirical claims, so far untested, rather than abstract ethical or philosophical positions. The dispute, therein, lies not so much in whether minors should be permitted to access predictive genetic testing but whether these empirical claims on the relative benefits or harms of testing should be assessed.
Aircraft noise prediction program theoretical manual, part 1
NASA Technical Reports Server (NTRS)
Zorumski, W. E.
1982-01-01
Aircraft noise prediction theoretical methods are given. The prediction of data which affect noise generation and propagation is addressed. These data include the aircraft flight dynamics, the source noise parameters, and the propagation effects.
Understanding Confounding Effects in Linguistic Coordination: An Information-Theoretic Approach
Gao, Shuyang; Ver Steeg, Greg; Galstyan, Aram
2015-01-01
We suggest an information-theoretic approach for measuring stylistic coordination in dialogues. The proposed measure has a simple predictive interpretation and can account for various confounding factors through proper conditioning. We revisit some of the previous studies that reported strong signatures of stylistic accommodation, and find that a significant part of the observed coordination can be attributed to a simple confounding effect—length coordination. Specifically, longer utterances tend to be followed by longer responses, which gives rise to spurious correlations in the other stylistic features. We propose a test to distinguish correlations in length due to contextual factors (topic of conversation, user verbosity, etc.) and turn-by-turn coordination. We also suggest a test to identify whether stylistic coordination persists even after accounting for length coordination and contextual factors. PMID:26115446
NASA Technical Reports Server (NTRS)
Mohn, L. W.
1975-01-01
The use of the Boeing TEA-230 Subsonic Flow Analysis method as a primary design tool in the development of cruise overwing nacelle configurations is presented. Surface pressure characteristics at 0.7 Mach number were determined by the TEA-230 method for a selected overwing flow-through nacelle configuration. Results of this analysis show excellent overall agreement with corresponding wind tunnel data. Effects of the presence of the nacelle on the wing pressure field were predicted accurately by the theoretical method. Evidence is provided that differences between theoretical and experimental pressure distributions in the present study would not result in significant discrepancies in the nacelle lines or nacelle drag estimates.
A research program to reduce interior noise in general aviation airplanes
NASA Technical Reports Server (NTRS)
Peschier, T. D.; Andrews, D.; Henderson, T.
1977-01-01
The relevance of KU-FRL test results in predicting (theoretically or semi-empirically) interior noise levels in general aviation aircraft was studied. As a result of this study, it was decided to make a few additions to the program. These additions are: (1) to use three (instead of two) noise sources in the plane wave tube to evaluate the influence of excitation spectrum on panel response, (2) to use theoretical and experimental data obtained in the course of the project to develop more efficient noise reduction materials (or procedures to apply these), or to develop guidelines for the design of such materials for procedures, and (3) to use nonstructural materials in the collection of specimens to be tested in the KU-FRL plane wave tube.
Statistical characterization of the fatigue behavior of composite lamina
NASA Technical Reports Server (NTRS)
Yang, J. N.; Jones, D. L.
1979-01-01
A theoretical model was developed to predict statistically the effects of constant and variable amplitude fatigue loadings on the residual strength and fatigue life of composite lamina. The parameters in the model were established from the results of a series of static tensile tests and a fatigue scan and a number of verification tests were performed. Abstracts for two other papers on the effect of load sequence on the statistical fatigue of composites are also presented.
Empowering nurses for work engagement and health in hospital settings.
Laschinger, Heather K Spence; Finegan, Joan
2005-10-01
Employee empowerment has become an increasingly important factor in determining employee health and wellbeing in restructured healthcare settings. The authors tested a theoretical model which specified the relationships among structural empowerment, 6 areas of worklife that promote employee engagement, and staff nurses' physical and mental health. A predictive, non-experimental design was used to test the model in a random sample of staff nurses. The authors discuss their findings and the implication for nurse administrators.
Dou, Kaili; Yu, Ping; Deng, Ning; Liu, Fang; Guan, YingPing; Li, Zhenye; Ji, Yumeng; Du, Ningkai; Lu, Xudong; Duan, Huilong
2017-12-06
Chronic disease patients often face multiple challenges from difficult comorbidities. Smartphone health technology can be used to help them manage their conditions only if they accept and use the technology. The aim of this study was to develop and test a theoretical model to predict and explain the factors influencing patients' acceptance of smartphone health technology for chronic disease management. Multiple theories and factors that may influence patients' acceptance of smartphone health technology have been reviewed. A hybrid theoretical model was built based on the technology acceptance model, dual-factor model, health belief model, and the factors identified from interviews that might influence patients' acceptance of smartphone health technology for chronic disease management. Data were collected from patient questionnaire surveys and computer log records about 157 hypertensive patients' actual use of a smartphone health app. The partial least square method was used to test the theoretical model. The model accounted for .412 of the variance in patients' intention to adopt the smartphone health technology. Intention to use accounted for .111 of the variance in actual use and had a significant weak relationship with the latter. Perceived ease of use was affected by patients' smartphone usage experience, relationship with doctor, and self-efficacy. Although without a significant effect on intention to use, perceived ease of use had a significant positive influence on perceived usefulness. Relationship with doctor and perceived health threat had significant positive effects on perceived usefulness, countering the negative influence of resistance to change. Perceived usefulness, perceived health threat, and resistance to change significantly predicted patients' intentions to use the technology. Age and gender had no significant influence on patients' acceptance of smartphone technology. The study also confirmed the positive relationship between intention to use and actual use of smartphone health apps for chronic disease management. This study developed a theoretical model to predict patients' acceptance of smartphone health technology for chronic disease management. Although resistance to change is a significant barrier to technology acceptance, careful management of doctor-patient relationship, and raising patients' awareness of the negative effect of chronic disease can negate the effect of resistance and encourage acceptance and use of smartphone health technology to support chronic disease management for patients in the community. ©Kaili Dou, Ping Yu, Ning Deng, Fang Liu, YingPing Guan, Zhenye Li, Yumeng Ji, Ningkai Du, Xudong Lu, Huilong Duan. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 06.12.2017.
Powdered aluminum and oxygen rocket propellants: Subscale combustion experiments
NASA Technical Reports Server (NTRS)
Meyer, Mike L.
1993-01-01
Aluminum combined with oxygen has been proposed as a potential lunar in situ propellant for ascent/descent and return missions for future lunar exploration. Engine concepts proposed to use this propellant have not previously been demonstrated, and the impact on performance from combustion and two-phase flow losses could only be estimated. Therefore, combustion tests were performed for aluminum and aluminum/magnesium alloy powders with oxygen in subscale heat-sink rocket engine hardware. The metal powder was pneumatically injected, with a small amount of nitrogen, through the center orifice of a single element O-F-O triplet injector. Gaseous oxygen impinged on the fuel stream. Hot-fire tests of aluminum/oxygen were performed over a mixture ratio range of 0.5 to 3.0, and at a chamber pressure of approximately 480 kPa (70 psia). The theoretical performance of the propellants was analyzed over a mixture ratio range of 0.5 to 5.0. In the theoretical predictions the ideal one-dimensional equilibrium rocket performance was reduced by loss mechanisms including finite rate kinetics, two-dimensional divergence losses, and boundary layer losses. Lower than predicted characteristic velocity and specific impulse performance efficiencies were achieved in the hot-fire tests, and this was attributed to poor mixing of the propellants and two-phase flow effects. Several tests with aluminum/9.8 percent magnesium alloy powder did not indicate any advantage over the pure aluminum fuel.
NASA Technical Reports Server (NTRS)
Nicks, C. O.; Childs, D. W.
1984-01-01
The importance of seal behavior in rotordynamics is discussed and current annular seal theory is reviewed. A Nelson's analytical-computational method for determining rotordynamic coefficients for this type of compressible-flow seal is outlined. Various means for the experimental identification of the dynamic coefficients are given, and the method employed at the Texas A and M University (TAMU) test facility is explained. The TAMU test apparatus is described, and the test procedures are discussed. Experimental results, including leakage, entrance-loss coefficients, pressure distributions, and rotordynamic coefficients for a smooth and a honeycomb constant-clearance seal are presented and compared to theoretical results from Nelson's analysis. The results for both seals show little sensitivity to the running speed over the test range. Agreement between test results and theory for leakage through the seal is satisfactory. Test results for direct stiffness show a greater sensitivity to fluid pre-rotation than predicted. Results also indicate that the deliberately roughened surface of the honeycomb seal provides improved stability versus the smooth seal.
Flexible Cryogenic Heat Pipe Development Program
NASA Technical Reports Server (NTRS)
1976-01-01
A heat pipe was designed for operation in the 100 - 200 K temperature range with maximum heat transport as a primary design goal; another designed for operation in the 15 - 100 K temperature range with maximum flexibility as a design goal. Optimum geometry and materials for the container and wicking systems were determined. The high power (100 - 200 K) heat pipe was tested with methane at 100 - 140 K, and test data indicated only partial priming with a performance limit of less than 50 percent of theoretical. A series of tests were conducted with ammonia at approximately 280 K to determine the performance under varying fluid charge and test conditions. The low temperature heat pipe was tested with oxygen at 85 - 95 K and with methanol at 295 - 315 K. Performance of the low temperature heat pipe was below theoretical predictions. Results of the completed testing are presented and possible performance limitation mechanisms are discussed. The lower-than-expected performance was felt to be due to small traces of non-condensible gases which prevented the composite wick from priming.
Axial-Load Fatigue Tests on 17-7 PH Stainless Steel Under Constant-Amplitude Loading
NASA Technical Reports Server (NTRS)
Leybold, Herbert A.
1960-01-01
Axial-load fatigue tests were conducted at room temperature on notched and unnotched sheet specimens of 17-7 PH stainless steel in Condition TH 1050. The notched specimens had theoretical stress-concentration factors of 2.32, 4.00, and 5.00. All specimens were tested under completely reversed loading. S-N curves are presented for each specimen configuration and ratios of fatigue strengths of unnotched specimens to those of notched specimens are given. Predictions of the fatigue behavior of notched specimens near the fatigue limit were made.
Transverse compression of PPTA fibers
NASA Astrophysics Data System (ADS)
Singletary, James
2000-07-01
Results of single transverse compression testing of PPTA and PIPD fibers, using a novel test device, are presented and discussed. In the tests, short lengths of single fibers are compressed between two parallel, stiff platens. The fiber elastic deformation is analyzed as a Hertzian contact problem. The inelastic deformation is analyzed by elastic-plastic FE simulation and by laser-scanning confocal microscopy of the compressed fibers ex post facto. The results obtained are compared to those in the literature and to the theoretical predictions of PPTA fiber transverse elasticity based on PPTA crystal elasticity.
NASA Astrophysics Data System (ADS)
Dittberner, Andrew; Bentler, Ruth
2005-09-01
The relationship between various directivity measures and subject performance with directional microphone hearing aids was determined. Test devices included first- and second-order directional microphones. Recordings of sentences and noise (Hearing in Noise Test, HINT) were made through each test device in simple, complex, and anisotropic background noise conditions. Twenty-six subjects, with normal hearing, were administered the HINT test recordings, and directional benefit was computed. These measures were correlated to theoretical, free-field, and KEMAR DI values, as well as front-to-back ratios, in situ SNRs, and a newly proposed Db-SNR, wherein a predictive value of the SNR improvement is calculated as a function of the noise source incidence. The different predictive scores showed high correlation to the measured directional benefit scores in the complex (diffuse-like) background noise condition (r=0.89-0.97, p<0.05) but not across all background noise conditions (r=0.45-0.97, p<0.05). The Db-SNR approach and the in situ SNR measures provided excellent prediction of subject performance in all background noise conditions (0.85-0.97, p<0.05) None of the predictive measures could account for the effects of reverberation on the speech signal (r=0.35-0.40, p<0.05).
Recall of Details Never Experienced: Effects of Age, Repetition, and Semantic Cues
ERIC Educational Resources Information Center
Holliday, Robyn E.; Reyna, Valerie F.; Brainerd, Charles J.
2008-01-01
To test theoretical predictions about the role of meaning connections in false memory, the effects of semantic cues and list repetition on children's false memories were evaluated across early childhood to mid-adolescence using the Deese-Roediger-McDermott (DRM) paradigm. True recall and false recall increased from 7 to 13 years. Study list…
ERIC Educational Resources Information Center
Deacon, S. Hélène; Kieffer, Michael
2018-01-01
The authors tested theoretically driven predictions as to the ways in which syntactic awareness, or awareness of word order within sentences, might contribute to reading comprehension, the end goal of reading development and instruction. They conducted a longitudinal study of 100 English-speaking children followed from Grade 3 to 4. Children…
Dropouts in Two-Year Colleges: Better Prediction with the Use of Moderator Subgroups.
ERIC Educational Resources Information Center
Capoor, Madan; Eagle, Norman
Failure to identify and account for the effect of moderator variables is an important reason for the low explanatory power of much educational research. Pre-existing subgroups such as sex, ethnicity, and curriculum offer an easily identifiable and theoretically meaningful source of moderator variables. Tests for intercept and slope differences in…
ERIC Educational Resources Information Center
Carmichael, Colin; MacDonald, Amy; McFarland-Piazza, Laura
2014-01-01
This article is based on an exploratory study that examines factors which predict children's performance on the numeracy component of the Australian National Assessment Program--Literacy and Numeracy (NAPLAN). Utilizing an ecological theoretical model, this study examines child, home and school variables which may enable or constrain NAPLAN…
ERIC Educational Resources Information Center
Phelps, Lynn; And Others
Three studies tested the capability of three measurement instruments to predict a communication behavior across a variety of communication situations. The intent of these related studies was to demonstrate the utility of a self-presentation analysis of the concept of personality, an approach postulating that people strive to create the impression…
ERIC Educational Resources Information Center
van Ruysseveldt, Joris; van Dijke, Marius
2011-01-01
Building on theoretical frameworks like the Job Demands Control model and Action Theory we tested whether the relationship between workload and employees' experiences of opportunities for workplace learning is of an inverted u-shaped nature and whether autonomy moderates this relationship. We predicted that--at moderate levels of…
ERIC Educational Resources Information Center
Simen, Patrick; Contreras, David; Buck, Cara; Hu, Peter; Holmes, Philip; Cohen, Jonathan D.
2009-01-01
The drift-diffusion model (DDM) implements an optimal decision procedure for stationary, 2-alternative forced-choice tasks. The height of a decision threshold applied to accumulating information on each trial determines a speed-accuracy tradeoff (SAT) for the DDM, thereby accounting for a ubiquitous feature of human performance in speeded response…
Du, Hongfei; Li, Xiaoming; Lin, Danhua; Tam, Cheuk Chi
2014-01-01
The current study aimed to investigate the impact of individualism, collectivism, and hopelessness on substance use. Hopelessness was hypothesized as a mediator between individualism and substance use, and between collectivism and substance use. We tested the hypothesis using a survey of 641 young rural-to-urban migrants in China. Consistent with our hypotheses, individualistic orientation predicted increased hopelessness and subsequently predicted more substance use, whereas collectivistic orientation was associated with decreased hopelessness and subsequently predicted less substance use. Hopelessness fully mediated the relations between individualism and substance use and between collectivism and substance use. The theoretical and practical implications of these findings were discussed.
Human Emotion Experiences Can Be Predicted on Theoretical Grounds: Evidence from Verbal Labeling
Scherer, Klaus R.; Meuleman, Ben
2013-01-01
In an effort to demonstrate that the verbal labeling of emotional experiences obeys lawful principles, we tested the feasibility of using an expert system called the Geneva Emotion Analyst (GEA), which generates predictions based on an appraisal theory of emotion. Several thousand respondents participated in an Internet survey that applied GEA to self-reported emotion experiences. Users recalled appraisals of emotion-eliciting events and labeled the experienced emotion with one or two words, generating a massive data set on realistic, intense emotions in everyday life. For a final sample of 5969 respondents we show that GEA achieves a high degree of predictive accuracy by matching a user’s appraisal input to one of 13 theoretically predefined emotion prototypes. The first prediction was correct in 51% of the cases and the overall diagnosis was considered as at least partially correct or appropriate in more than 90% of all cases. These results support a component process model that encourages focused, hypothesis-guided research on elicitation and differentiation, memory storage and retrieval, and categorization and labeling of emotion episodes. We discuss the implications of these results for the study of emotion terms in natural language semantics. PMID:23483988
Verification of models for ballistic movement time and endpoint variability.
Lin, Ray F; Drury, Colin G
2013-01-01
A hand control movement is composed of several ballistic movements. The time required in performing a ballistic movement and its endpoint variability are two important properties in developing movement models. The purpose of this study was to test potential models for predicting these two properties. Twelve participants conducted ballistic movements of specific amplitudes using a drawing tablet. The measured data of movement time and endpoint variability were then used to verify the models. This study was successful with Hoffmann and Gan's movement time model (Hoffmann, 1981; Gan and Hoffmann 1988) predicting more than 90.7% data variance for 84 individual measurements. A new theoretically developed ballistic movement variability model, proved to be better than Howarth, Beggs, and Bowden's (1971) model, predicting on average 84.8% of stopping-variable error and 88.3% of aiming-variable errors. These two validated models will help build solid theoretical movement models and evaluate input devices. This article provides better models for predicting end accuracy and movement time of ballistic movements that are desirable in rapid aiming tasks, such as keying in numbers on a smart phone. The models allow better design of aiming tasks, for example button sizes on mobile phones for different user populations.
Rarefaction effects in gas flows over curved surfaces
NASA Astrophysics Data System (ADS)
Dongari, Nishanth; White, Craig; Scanlon, Thomas J.; Zhang, Yonghao; Reese, Jason M.
2012-11-01
The fundamental test case of gas flow between two concentric rotating cylinders is considered in order to investigate rarefaction effects associated with the Knudsen layers over curved surfaces. We carry out direct simulation Monte Carlo simulations covering a wide range of Knudsen numbers and accommodation coefficients, and for various outer-to-inner cylinder radius ratios. Numerical data is compared with classical slip flow theory and a new power-law (PL) wall scaling model. The PL model incorporates Knudsen layer effects in near-wall regions by taking into account the boundary limiting effects on the molecular free paths. The limitations of both theoretical models are explored with respect to rarefaction and curvature effects. Torque and velocity profile comparisons also convey that mere prediction of integral flow parameters does not guarantee the accuracy of a theoretical model, and that it is important to ensure that prediction of the local flowfield is in agreement with simulation data.
NASA Astrophysics Data System (ADS)
Waxler, R.; Talmadge, C. L.; Blom, P.
2009-12-01
Theory predicts that for ground to ground infrasound propagation along paths which travel downwind, relative to the stratospheric jet, there is a shadow zone which ends about 200 km from the source where the first return from the stratosphere strikes the earth. With increasing range the single stratospheric arrival splits into two distinct arrivals, a fast arrival with the trace velocity of the effective sound speed at the stratopause, and a slower arrival with the trace velocity of the sound speed on the ground. To test the theory we have deployed eight infrasound arrays along an approximate line directly west of the site of the US Navy's Trident Missile rocket motor eliminations. The arrays were deployed during the summer of 2009 spaced roughly 10 km apart along a segment from 180 to 260 km west of the site. Comparisons between the theoretical predictions and the received data will be presented.
The simultaneous mass and energy evaporation (SM2E) model.
Choudhary, Rehan; Klauda, Jeffery B
2016-01-01
In this article, the Simultaneous Mass and Energy Evaporation (SM2E) model is presented. The SM2E model is based on theoretical models for mass and energy transfer. The theoretical models systematically under or over predicted at various flow conditions: laminar, transition, and turbulent. These models were harmonized with experimental measurements to eliminate systematic under or over predictions; a total of 113 measured evaporation rates were used. The SM2E model can be used to estimate evaporation rates for pure liquids as well as liquid mixtures at laminar, transition, and turbulent flow conditions. However, due to limited availability of evaporation data, the model has so far only been tested against data for pure liquids and binary mixtures. The model can take evaporative cooling into account and when the temperature of the evaporating liquid or liquid mixture is known (e.g., isothermal evaporation), the SM2E model reduces to a mass transfer-only model.
Corruption and air pollution in Europe.
Ivanova, Kate
2011-01-01
This paper examines how the effectiveness of regulatory framework influences levels of sulphur emissions in a scenario where, to reduce its (emission-) tax payments, a polluting firm may under-report emissions level at the risk of being audited and fined. First, a model to explain how changes in regulatory framework (e.g., audit effectiveness) and transboundary spillovers affect both actual and reported emissions is developed. Then the theoretical predictions using data for 39 European countries from 1999 to 2003 are tested and inferences about true emission levels are made. The empirical analysis supports the theoretical predictions with significant implications for the interpretation of pollution data reported to international monitoring agencies. Countries with effective regulation are likely to have relatively high reported emissions of sulphur. But this should not automatically be interpreted as weak environmental performance, because their actual pollution levels are likely to be lower than in nations with less effective regulation.
Richards, Adam S
2014-01-01
This investigation utilized the integrative model of behavioral prediction to assess the Montana Meth Project (MMP) campaign by testing theoretical antecedents of attitude toward methamphetamine (meth) use. College students in Montana (N = 403) were surveyed about their exposure to MMP ads and communication about meth in conversation. Structural equation modeling showed that the data fit the specified model well. Significant parameters indicated that only beliefs about the negative relational outcomes of meth use, and not about personal well-being or physical appearance, were related to attitude. Attention, rather than encoded exposure, to MMP ads related to each belief about meth use. Conversation frequency related to engagement with MMP ads, and a conversational partner's conveyed attitude toward meth use related to personal and physical beliefs as well as attitudes. Theoretical and practical implications of the findings are discussed.
Markkula, Gustav; Boer, Erwin; Romano, Richard; Merat, Natasha
2018-06-01
A conceptual and computational framework is proposed for modelling of human sensorimotor control and is exemplified for the sensorimotor task of steering a car. The framework emphasises control intermittency and extends on existing models by suggesting that the nervous system implements intermittent control using a combination of (1) motor primitives, (2) prediction of sensory outcomes of motor actions, and (3) evidence accumulation of prediction errors. It is shown that approximate but useful sensory predictions in the intermittent control context can be constructed without detailed forward models, as a superposition of simple prediction primitives, resembling neurobiologically observed corollary discharges. The proposed mathematical framework allows straightforward extension to intermittent behaviour from existing one-dimensional continuous models in the linear control and ecological psychology traditions. Empirical data from a driving simulator are used in model-fitting analyses to test some of the framework's main theoretical predictions: it is shown that human steering control, in routine lane-keeping and in a demanding near-limit task, is better described as a sequence of discrete stepwise control adjustments, than as continuous control. Results on the possible roles of sensory prediction in control adjustment amplitudes, and of evidence accumulation mechanisms in control onset timing, show trends that match the theoretical predictions; these warrant further investigation. The results for the accumulation-based model align with other recent literature, in a possibly converging case against the type of threshold mechanisms that are often assumed in existing models of intermittent control.
Traction contact performance evaluation at high speeds
NASA Technical Reports Server (NTRS)
Tevaarwerk, J. L.
1981-01-01
The results of traction tests performed on two fluids are presented. These tests covered a pressure range of 1.0 to 2.5 GPa, an inlet temperature range of 30 'C to 70 'C, a speed range of 10 to 80 m/sec, aspect ratios of .5 to 5 and spin from 0 to 2.1 percent. The test results are presented in the form of two dimensionless parameters, the initial traction slope and the maximum traction peak. With the use of a suitable rheological fluid model the actual traction curves measured can now be reconstituted from the two fluid parameters. More importantly, the knowledge of these parameters together with the fluid rheological model, allow the prediction of traction under conditions of spin, slip and any combination thereof. Comparison between theoretically predicted traction under these conditions and those measured in actual traction tests shows that this method gives good results.
NASA Technical Reports Server (NTRS)
Coy, J. J.; Gorla, R. S. R.; Townsend, D. P.
1979-01-01
Elastohydrodynamic film thicknesses were measured for a 20-mm bore ball bearing using the capacitance technique. The bearing was thrust loaded to 90, 445, and 778 N (20, 100, and 175 lb). The corresponding maximum contact stress on the inner race was 1.28, 2.09, and 2.45 GPa (185 000, 303,000, and 356, 000 psi). Test speeds ranged from 400 to 15,000 rpm. Measurements were taken with four different lubricants: (1) synthetic paraffinic; (2) synthetic paraffinic with additives; (3) synthetic type II aircraft oil; and (4) synthetic cycloaliphatic hydrocarbon traction fluid. The test bearing was mist lubricated. Test temperatures were 27, 65, and 121 C (80, 150, and 250 F). The measured results for the various test parameters were compared to theoretical predictions from computer programs. Also the data were plotted on dimensionless coordinates and compared to several classical isothermal theories.
NASA Technical Reports Server (NTRS)
Bobbitt, P. J.; Manro, M. E.; Kulfan, R. M.
1980-01-01
Wind tunnel tests of an arrow wing body configuration consisting of flat, twisted, and cambered twisted wings were conducted at Mach numbers from 0.40 to 2.50 to provide an experimental data base for comparison with theoretical methods. A variety of leading and trailing edge control surface deflections were included in these tests, and in addition, the cambered twisted wing was tested with an outboard vertical fin to determine its effect on wing and control surface loads. Theory experiment comparisons show that current state of the art linear and nonlinear attached flow methods were adequate at small angles of attack typical of cruise conditions. The incremental effects of outboard fin, wing twist, and wing camber are most accurately predicted by the advanced panel method PANAIR. Results of the advanced panel separated flow method, obtained with an early version of the program, show promise that accurate detailed pressure predictions may soon be possible for an aeroelasticity deformed wing at high angles of attack.
Quinn, Francis; Johnston, Marie; Johnston, Derek W
2013-01-01
Previous research has supported an integrated biomedical and behavioural model explaining activity limitations. However, further tests of this model are required at the within-person level, because while it proposes that the constructs are related within individuals, it has primarily been tested between individuals in large group studies. We aimed to test the integrated model at the within-person level. Six correlational N-of-1 studies in participants with arthritis, chronic pain and walking limitations were carried out. Daily measures of theoretical constructs were collected using a hand-held computer (PDA), the activity was assessed by self-report and accelerometer and the data were analysed using time-series analysis. The biomedical model was not supported as pain impairment did not predict activity, so the integrated model was supported partially. Impairment predicted intention to move around, while perceived behavioural control (PBC) and intention predicted activity. PBC did not predict activity limitation in the expected direction. The integrated model of disability was partially supported within individuals, especially the behavioural elements. However, results suggest that different elements of the model may drive activity (limitations) for different individuals. The integrated model provides a useful framework for understanding disability and suggests interventions, and the utility of N-of-1 methodology for testing theory is illustrated.
NASA Technical Reports Server (NTRS)
Pope, L. D.; Wilby, E. G.; Willis, C. M.; Mayes, W. H.
1983-01-01
As part of the continuing development of an aircraft interior noise prediction model, in which a discrete modal representation and power flow analysis are used, theoretical results are considered for inclusion of sidewall trim, stiffened structures, and cabin acoustics with floor partition. For validation purposes, predictions of the noise reductions for three test articles (a bare ring-stringer stiffened cylinder, an unstiffened cylinder with floor and insulation, and a ring-stringer stiffened cylinder with floor and sidewall trim) are compared with measurements.
Powell, Rachael; Pattison, Helen M; Francis, Jill J
2016-01-01
Chlamydia is a common sexually transmitted infection that has potentially serious consequences unless detected and treated early. The health service in the UK offers clinic-based testing for chlamydia but uptake is low. Identifying the predictors of testing behaviours may inform interventions to increase uptake. Self-tests for chlamydia may facilitate testing and treatment in people who avoid clinic-based testing. Self-testing and being tested by a health care professional (HCP) involve two contrasting contexts that may influence testing behaviour. However, little is known about how predictors of behaviour differ as a function of context. In this study, theoretical models of behaviour were used to assess factors that may predict intention to test in two different contexts: self-testing and being tested by a HCP. Individuals searching for or reading about chlamydia testing online were recruited using Google Adwords. Participants completed an online questionnaire that addressed previous testing behaviour and measured constructs of the Theory of Planned Behaviour and Protection Motivation Theory, which propose a total of eight possible predictors of intention. The questionnaire was completed by 310 participants. Sufficient data for multiple regression were provided by 102 and 118 respondents for self-testing and testing by a HCP respectively. Intention to self-test was predicted by vulnerability and self-efficacy, with a trend-level effect for response efficacy. Intention to be tested by a HCP was predicted by vulnerability, attitude and subjective norm. Thus, intentions to carry out two testing behaviours with very similar goals can have different predictors depending on test context. We conclude that interventions to increase self-testing should be based on evidence specifically related to test context.
Podczeck, Fridrun; Newton, J Michael; Fromme, Paul
2014-12-30
Flat, round tablets may have a breaking ("score") line. Pharmacopoeial tablet breaking load tests are diametral in their design, and industrially used breaking load testers often have automatic tablet feeding systems, which position the tablets between the loading platens of the machine with the breaking lines in random orientation to the applied load. The aim of this work was to ascertain the influence of the position of the breaking line in a diametral compression test using finite element methodology (FEM) and to compare the theoretical results with practical findings using commercially produced bevel-edged, scored tablets. Breaking line test positions at an angle of 0°, 22.5°, 45°, 67.5° and 90° relative to the loading plane were studied. FEM results obtained for fully elastic and elasto-plastic tablets were fairly similar, but they highlighted large differences in stress distributions depending on the position of the breaking line. The stress values at failure were predicted to be similar for tablets tested at an angle of 45° or above, whereas at lower test angles the predicted breaking loads were up to three times larger. The stress distributions suggested that not all breaking line angles would result in clean tensile failure. Practical results, however, did not confirm the differences in the predicted breaking loads, but they confirmed differences in the way tablets broke. The results suggest that it is not advisable to convert breaking loads obtained on scored tablets into tablet tensile strength values, and comparisons between different tablets or batches should carefully consider the orientation of the breaking line with respect to the loading plane, as the failure mechanisms appear to vary. Copyright © 2014 Elsevier B.V. All rights reserved.
NASA Astrophysics Data System (ADS)
Lee, J. H.; Kim, S. H.; Park, J. K.; Choi, W. C.; Yoon, S. J.
2018-06-01
Many researches focused on the mechanical properties of steel and concrete have been carried out for applications in the construction industry. However, in order to clarify the mechanical properties of pultruded fiber-reinforced polymer (PFRP) structural members for construction, testing is needed. Deriving the mechanical properties of PFRP structural members through testing is difficult, however, because some members cannot be tested easily due to their cross-section dimensions. This paper reports a part of studies that attempt to present conservative results in the case of members that cannot be tested reasonably. The authors obtained and compared experimental and theoretical modulus of elasticity values. If the mechanical properties of PFRP members can be predicted using reasonable and conservative values, then the structure can be designed economically and safely even in the early design stages. To this end, this paper proposes a strain energy approach as a conservative and convenient way to predict the mechanical properties of PFRP structural members. The strain energy data obtained can be used to predict the mechanical properties of PFRP members in the construction field.
Combined-load stress-strain relationship for advanced fiber composites
NASA Technical Reports Server (NTRS)
Chamis, C. C.; Sullivan, T. L.
1975-01-01
It was demonstrated experimentally that only one test specimen is required to determine the combined-load stress-strain relationships of a given fiber composite system. These relationships were determined using a thin angle-plied laminate tube and subjecting it to a number of combined-loading conditions. The measured data obtained are compared with theoretical predictions. Some important considerations associated with such a test are identified, and the significance of combined-load stress-strain relationships in certain practical designs are discussed.
NASA Technical Reports Server (NTRS)
Mcghee, R. J.; Beasley, W. D.
1976-01-01
Wind tunnel tests were conducted to determine the effects of airfoil thickness-ratio on the low speed aerodynamic characteristics of an initial family of airfoils. The results were compared with theoretical predictions obtained from a subsonic viscous method. The tests were conducted over a Mach number range from 0.10 to 0.28. Chord Reynolds numbers varied from about 2.0 x 1 million to 9.0 x 1 million.
Results from a Grazing Incidence X-Ray Interferometer
NASA Technical Reports Server (NTRS)
Joy, Marshall K.; Shipley, Ann; Cash, Webster; Carter, James
2000-01-01
A prototype grazing incidence interferometer has been built and tested at EUV and X-ray wavelengths using a 120 meter long vacuum test facility at Marshall Space Flight Center. We describe the design and construction of the interferometer, the EUV and x-ray sources, the detector systems, and compare the interferometric fringe measurements with theoretical predictions. We also describe the next-generation grazing incidence system which is designed to provide laboratory demonstration of key technologies that will be needed for a space-based x-ray interferometer.
von Busse, Rhea; Swartz, Sharon M; Voigt, Christian C
2013-06-01
Aerodynamic theory predicts that flight for fixed-wing aircraft requires more energy at low and high speeds compared with intermediate speeds, and this theory has often been extended to predict speed-dependent metabolic rates and optimal flight speeds for flying animals. However, the theoretical U-shaped flight power curve has not been robustly tested for Chiroptera, the only mammals capable of flapping flight. We examined the metabolic rate of seven Seba's short-tailed fruit bats (Carollia perspicillata) during unrestrained flight in a wind tunnel at air speeds from 1 to 7 m s(-1). Following intra-peritoneal administration of (13)C-labeled Na-bicarbonate, we measured the enrichment in (13)C of exhaled breath before and after flight. We converted fractional turnover of (13)C into metabolic rate and power, based on the assumption that bats oxidized glycogen during short flights. Power requirements of flight varied with air speed in a U-shaped manner in five out of seven individuals, whereas energy turnover was not related to air speed in two individuals. Power requirements of flight were close to values predicted by Pennycuick's aerodynamic model for minimum power speed, but differed for maximum range speed. The results of our experiment support the theoretical expectation of a U-shaped power curve for flight metabolism in a bat.
The perfect family: decision making in biparental care.
Akçay, Erol; Roughgarden, Joan
2009-10-13
Previous theoretical work on parental decisions in biparental care has emphasized the role of the conflict between evolutionary interests of parents in these decisions. A prominent prediction from this work is that parents should compensate for decreases in each other's effort, but only partially so. However, experimental tests that manipulate parents and measure their responses fail to confirm this prediction. At the same time, the process of parental decision making has remained unexplored theoretically. We develop a model to address the discrepancy between experiments and the theoretical prediction, and explore how assuming different decision making processes changes the prediction from the theory. We assume that parents make decisions in behavioral time. They have a fixed time budget, and allocate it between two parental tasks: provisioning the offspring and defending the nest. The proximate determinant of the allocation decisions are parents' behavioral objectives. We assume both parents aim to maximize the offspring production from the nest. Experimental manipulations change the shape of the nest production function. We consider two different scenarios for how parents make decisions: one where parents communicate with each other and act together (the perfect family), and one where they do not communicate, and act independently (the almost perfect family). The perfect family model is able to generate all the types of responses seen in experimental studies. The kind of response predicted depends on the nest production function, i.e. how parents' allocations affect offspring production, and the type of experimental manipulation. In particular, we find that complementarity of parents' allocations promotes matching responses. In contrast, the relative responses do not depend on the type of manipulation in the almost perfect family model. These results highlight the importance of the interaction between nest production function and how parents make decisions, factors that have largely been overlooked in previous models.
Some Unsolved Problems, Questions, and Applications of the Brightsen Nucleon Cluster Model
NASA Astrophysics Data System (ADS)
Smarandache, Florentin
2010-10-01
Brightsen Model is opposite to the Standard Model, and it was build on John Weeler's Resonating Group Structure Model and on Linus Pauling's Close-Packed Spheron Model. Among Brightsen Model's predictions and applications we cite the fact that it derives the average number of prompt neutrons per fission event, it provides a theoretical way for understanding the low temperature / low energy reactions and for approaching the artificially induced fission, it predicts that forces within nucleon clusters are stronger than forces between such clusters within isotopes; it predicts the unmatter entities inside nuclei that result from stable and neutral union of matter and antimatter, and so on. But these predictions have to be tested in the future at the new CERN laboratory.
NASA Astrophysics Data System (ADS)
Papanicolaou, G. C.; Pappa, E. J.; Portan, D. V.; Kotrotsos, A.; Kollia, E.
2018-02-01
The aim of the present investigation was to study the effect of both the stacking sequence and surface treatment on the thermal conductivity of multilayered hybrid nano-composites. Four types of multilayered hybrid nanocomposites were manufactured and tested: Nitinol- CNTs (carbon nanotubes)- Acrylic resin; Nitinol- Acrylic resin- CNTs; Surface treated Nitinol- CNTs- Acrylic resin and Surface treated Nitinol- Acrylic resin- CNTs. Surface treatment of Nitinol plies was realized by means of the electrochemical anodization. Surface topography of the anodized nitinol sheets was investigated through Scanning Electron Microscopy (SEM). It was found that the overall thermal response of the manufactured multilayered nano-composites was greatly influenced by both the anodization and the stacking sequence. A theoretical model for the prediction of the overall thermal conductivity has been developed considering the nature of the different layers, their stacking sequence as well as the interfacial thermal resistance. Thermal conductivity and Differential Scanning Calorimetry (DSC) measurements were conducted, to verify the predicted by the model overall thermal conductivities. In all cases, a good agreement between theoretical predictions and experimental results was found.
Modeling Kelvin Wave Cascades in Superfluid Helium
NASA Astrophysics Data System (ADS)
Boffetta, G.; Celani, A.; Dezzani, D.; Laurie, J.; Nazarenko, S.
2009-09-01
We study two different types of simplified models for Kelvin wave turbulence on quantized vortex lines in superfluids near zero temperature. Our first model is obtained from a truncated expansion of the Local Induction Approximation (Truncated-LIA) and it is shown to possess the same scalings and the essential behaviour as the full Biot-Savart model, being much simpler than the later and, therefore, more amenable to theoretical and numerical investigations. The Truncated-LIA model supports six-wave interactions and dual cascades, which are clearly demonstrated via the direct numerical simulation of this model in the present paper. In particular, our simulations confirm presence of the weak turbulence regime and the theoretically predicted spectra for the direct energy cascade and the inverse wave action cascade. The second type of model we study, the Differential Approximation Model (DAM), takes a further drastic simplification by assuming locality of interactions in k-space via using a differential closure that preserves the main scalings of the Kelvin wave dynamics. DAMs are even more amenable to study and they form a useful tool by providing simple analytical solutions in the cases when extra physical effects are present, e.g. forcing by reconnections, friction dissipation and phonon radiation. We study these models numerically and test their theoretical predictions, in particular the formation of the stationary spectra, and closeness of numerics for the higher-order DAM to the analytical predictions for the lower-order DAM.
Taraji, Maryam; Haddad, Paul R; Amos, Ruth I J; Talebi, Mohammad; Szucs, Roman; Dolan, John W; Pohl, Chris A
2017-02-07
A design-of-experiment (DoE) model was developed, able to describe the retention times of a mixture of pharmaceutical compounds in hydrophilic interaction liquid chromatography (HILIC) under all possible combinations of acetonitrile content, salt concentration, and mobile-phase pH with R 2 > 0.95. Further, a quantitative structure-retention relationship (QSRR) model was developed to predict retention times for new analytes, based only on their chemical structures, with a root-mean-square error of prediction (RMSEP) as low as 0.81%. A compound classification based on the concept of similarity was applied prior to QSRR modeling. Finally, we utilized a combined QSRR-DoE approach to propose an optimal design space in a quality-by-design (QbD) workflow to facilitate the HILIC method development. The mathematical QSRR-DoE model was shown to be highly predictive when applied to an independent test set of unseen compounds in unseen conditions with a RMSEP value of 5.83%. The QSRR-DoE computed retention time of pharmaceutical test analytes and subsequently calculated separation selectivity was used to optimize the chromatographic conditions for efficient separation of targets. A Monte Carlo simulation was performed to evaluate the risk of uncertainty in the model's prediction, and to define the design space where the desired quality criterion was met. Experimental realization of peak selectivity between targets under the selected optimal working conditions confirmed the theoretical predictions. These results demonstrate how discovery of optimal conditions for the separation of new analytes can be accelerated by the use of appropriate theoretical tools.
NASA Technical Reports Server (NTRS)
Smith, Tamara A.; Pavli, Albert J.; Kacynski, Kenneth J.
1987-01-01
The Joint Army, Navy, NASA, Air Force (JANNAF) rocket-engine performance-prediction procedure is based on the use of various reference computer programs. One of the reference programs for nozzle analysis is the Two-Dimensional Kinetics (TDK) Program. The purpose of this report is to calibrate the JANNAF procedure that has been incorporated into the December 1984 version of the TDK program for the high-area-ratio rocket-engine regime. The calibration was accomplished by modeling the performance of a 1030:1 rocket nozzle tested at NASA Lewis. A detailed description of the test conditions and TDK input parameters is given. The reuslts indicate that the computer code predicts delivered vacuum specific impulse to within 0.12 to 1.9 percent of the experimental data. Vacuum thrust coefficient predictions were within + or - 1.3 percent of experimental results. Predictions of wall static pressure were within approximately + or - 5 percent of the measured values.
Derivation and experimental verification of clock synchronization theory
NASA Technical Reports Server (NTRS)
Palumbo, Daniel L.
1994-01-01
The objective of this work is to validate mathematically derived clock synchronization theories and their associated algorithms through experiment. Two theories are considered, the Interactive Convergence Clock Synchronization Algorithm and the Mid-Point Algorithm. Special clock circuitry was designed and built so that several operating conditions and failure modes (including malicious failures) could be tested. Both theories are shown to predict conservative upper bounds (i.e., measured values of clock skew were always less than the theory prediction). Insight gained during experimentation led to alternative derivations of the theories. These new theories accurately predict the clock system's behavior. It is found that a 100% penalty is paid to tolerate worst case failures. It is also shown that under optimal conditions (with minimum error and no failures) the clock skew can be as much as 3 clock ticks. Clock skew grows to 6 clock ticks when failures are present. Finally, it is concluded that one cannot rely solely on test procedures or theoretical analysis to predict worst case conditions. conditions.
Experimental validation of clock synchronization algorithms
NASA Technical Reports Server (NTRS)
Palumbo, Daniel L.; Graham, R. Lynn
1992-01-01
The objective of this work is to validate mathematically derived clock synchronization theories and their associated algorithms through experiment. Two theories are considered, the Interactive Convergence Clock Synchronization Algorithm and the Midpoint Algorithm. Special clock circuitry was designed and built so that several operating conditions and failure modes (including malicious failures) could be tested. Both theories are shown to predict conservative upper bounds (i.e., measured values of clock skew were always less than the theory prediction). Insight gained during experimentation led to alternative derivations of the theories. These new theories accurately predict the behavior of the clock system. It is found that a 100 percent penalty is paid to tolerate worst-case failures. It is also shown that under optimal conditions (with minimum error and no failures) the clock skew can be as much as three clock ticks. Clock skew grows to six clock ticks when failures are present. Finally, it is concluded that one cannot rely solely on test procedures or theoretical analysis to predict worst-case conditions.
Predicting Presynaptic and Postsynaptic Neurotoxins by Developing Feature Selection Technique
Yang, Yunchun; Zhang, Chunmei; Chen, Rong; Huang, Po
2017-01-01
Presynaptic and postsynaptic neurotoxins are proteins which act at the presynaptic and postsynaptic membrane. Correctly predicting presynaptic and postsynaptic neurotoxins will provide important clues for drug-target discovery and drug design. In this study, we developed a theoretical method to discriminate presynaptic neurotoxins from postsynaptic neurotoxins. A strict and objective benchmark dataset was constructed to train and test our proposed model. The dipeptide composition was used to formulate neurotoxin samples. The analysis of variance (ANOVA) was proposed to find out the optimal feature set which can produce the maximum accuracy. In the jackknife cross-validation test, the overall accuracy of 94.9% was achieved. We believe that the proposed model will provide important information to study neurotoxins. PMID:28303250
The constructive, destructive, and reconstructive power of social norms.
Schultz, P Wesley; Nolan, Jessica M; Cialdini, Robert B; Goldstein, Noah J; Griskevicius, Vladas
2007-05-01
Despite a long tradition of effectiveness in laboratory tests, normative messages have had mixed success in changing behavior in field contexts, with some studies showing boomerang effects. To test a theoretical account of this inconsistency, we conducted a field experiment in which normative messages were used to promote household energy conservation. As predicted, a descriptive normative message detailing average neighborhood usage produced either desirable energy savings or the undesirable boomerang effect, depending on whether households were already consuming at a low or high rate. Also as predicted, adding an injunctive message (conveying social approval or disapproval) eliminated the boomerang effect. The results offer an explanation for the mixed success of persuasive appeals based on social norms and suggest how such appeals should be properly crafted.
Use of an expert system data analysis manager for space shuttle main engine test evaluation
NASA Technical Reports Server (NTRS)
Abernethy, Ken
1988-01-01
The ability to articulate, collect, and automate the application of the expertise needed for the analysis of space shuttle main engine (SSME) test data would be of great benefit to NASA liquid rocket engine experts. This paper describes a project whose goal is to build a rule-based expert system which incorporates such expertise. Experiential expertise, collected directly from the experts currently involved in SSME data analysis, is used to build a rule base to identify engine anomalies similar to those analyzed previously. Additionally, an alternate method of expertise capture is being explored. This method would generate rules inductively based on calculations made using a theoretical model of the SSME's operation. The latter rules would be capable of diagnosing anomalies which may not have appeared before, but whose effects can be predicted by the theoretical model.
Working memory and inattentional blindness.
Bredemeier, Keith; Simons, Daniel J
2012-04-01
Individual differences in working memory predict many aspects of cognitive performance, especially for tasks that demand focused attention. One negative consequence of focused attention is inattentional blindness, the failure to notice unexpected objects when attention is engaged elsewhere. Yet, the relationship between individual differences in working memory and inattentional blindness is unclear; some studies have found that higher working memory capacity is associated with greater noticing, but others have found no direct association. Given the theoretical and practical significance of such individual differences, more definitive tests are needed. In two studies with large samples, we tested the relationship between multiple working memory measures and inattentional blindness. Individual differences in working memory predicted the ability to perform an attention-demanding tracking task, but did not predict the likelihood of noticing an unexpected object present during the task. We discuss the reasons why we might not expect such individual differences in noticing and why other studies may have found them.
Gravitational redshift of galaxies in clusters as predicted by general relativity.
Wojtak, Radosław; Hansen, Steen H; Hjorth, Jens
2011-09-28
The theoretical framework of cosmology is mainly defined by gravity, of which general relativity is the current model. Recent tests of general relativity within the Lambda Cold Dark Matter (ΛCDM) model have found a concordance between predictions and the observations of the growth rate and clustering of the cosmic web. General relativity has not hitherto been tested on cosmological scales independently of the assumptions of the ΛCDM model. Here we report an observation of the gravitational redshift of light coming from galaxies in clusters at the 99 per cent confidence level, based on archival data. Our measurement agrees with the predictions of general relativity and its modification created to explain cosmic acceleration without the need for dark energy (the f(R) theory), but is inconsistent with alternative models designed to avoid the presence of dark matter. © 2011 Macmillan Publishers Limited. All rights reserved
A test of reproductive power in snakes.
Boback, Scott M; Guyer, Craig
2008-05-01
Reproductive power is a contentious concept among ecologists, and the model has been criticized on theoretical and empirical grounds. Despite these criticisms, the model has successfully predicted the modal (optimal) size in three large taxonomic groups and the shape of the body size distribution in two of these groups. We tested the reproductive power model on snakes, a group that differs markedly in physiology, foraging ecology, and body shape from the endothermic groups upon which the model was derived. Using detailed field data from the published literature, snake-specific constants associated with reproductive power were determined using allometric relationships of energy invested annually in egg production and population productivity. The resultant model accurately predicted the mode and left side of the size distribution for snakes but failed to predict the right side of that distribution. If the model correctly describes what is possible in snakes, observed size diversity is limited, especially in the largest size classes.
Effects of sediment supply on surface textures of gravel-bed rivers
John M. Buffington; David R. Montgomery
1999-01-01
Using previously published data from flume studies, we test a new approach for quantifying the effects of sediment supply (i.e., bed material supply) on surface grain size of equilibrium gravel channels. Textural response to sediment supply is evaluated relative to a theoretical prediction of competent median grain size (Dâ50). We find that surface median grain size (...
Improved Polyurethane Storage Tank Performance
2010-12-15
determined through testing that the initial weld adhesion and weld adhesion after high temperature fuel (HTF) immersion have a linear relationship ...Unfortunately, the relationship between HTF weld adhesion and HTF dead- load performance is not as predictive. From 30 to approximately 45 lbsf/inch...consequently, will handle a higher ( theoretically double) shear load. This weld joint is currently being used to fabricate collapsible fuel tanks
ERIC Educational Resources Information Center
Ritter, Jessica A.
2008-01-01
The social work literature is replete with studies evaluating social workers' direct practice interventions, but strikingly few have assessed how well social workers are faring in the political arena. This study tests a major theoretical model, the civic voluntarism model, developed to explain why some citizens become involved in politics, whereas…
Flutter of Darrieus wind turbine blades
NASA Technical Reports Server (NTRS)
Ham, N. D.
1978-01-01
The testing of Darrieus wind turbines has indicated that under certain conditions, serious vibrations of the blades can occur, involving flatwise bending, torsion, and chordwise bending. A theoretical method of predicting the aeroelastic stability of the coupled bending and torsional motion of such blades with a view to determining the cause of these vibrations, and a means of suppressing them was developed.
ERIC Educational Resources Information Center
Lafave, Mark R.; Katz, Larry; Vaughn, Norman
2013-01-01
Context: In order to study the efficacy of assessment methods, a theoretical framework of Earl's model of assessment was introduced. Objective: (1) Introduce the predictive learning assessment model (PLAM) as an application of Earl's model of learning; (2) test Earl's model of learning through the use of the Standardized Orthopedic Assessment Tool…
ERIC Educational Resources Information Center
Johnson, Joel D.
2013-01-01
This study confirmed appropriate measurement model fit for a theoretical model, the STEM vocational choice (STEM-VC) model. This model identifies exogenous factors that successfully predicted, at a statistically significant level, a student's vocational choice decision to pursue a STEM degree at transfer. The student population examined for this…
ERIC Educational Resources Information Center
Devine, Rory T.; White, Naomi; Ensor, Rosie; Hughes, Claire
2016-01-01
The vast majority of studies on theory of mind (ToM) have focused on the preschool years. Extending the developmental scope of ToM research presents opportunities to both reassess theoretical accounts of ToM and test its predictive utility. The twin aims of this longitudinal study were to examine developmental relations between ToM, executive…
ERIC Educational Resources Information Center
Boie, Ioana; Lopez, Anna L.; Sass, Daniel A.
2013-01-01
This study evaluated a model linking internalization and dieting behaviors in a sample ("n" = 499) of Latina/o and White college students. Analyses revealed that the scales were invariant across ethnic and gender groups and generally supported the invariance of the proposed model across these groups. Analyses also revealed no ethnic mean…
ERIC Educational Resources Information Center
Douglas, Kevin S.; Guy, Laura S.; Edens, John F.; Boer, Douglas P.; Hamilton, Jennine
2007-01-01
The Personality Assessment Inventory's (PAI's) ability to predict psychopathic personality features, as assessed by the Psychopathy Checklist-Revised (PCL-R), was examined. To investigate whether the PAI Antisocial Features (ANT) Scale and subscales possessed incremental validity beyond other theoretically relevant PAI scales, optimized regression…
Buckling characteristics of hypersonic aircraft wing tubular panels
NASA Technical Reports Server (NTRS)
Ko, William L.; Shideler, John L.; Fields, Roger A.
1986-01-01
The buckling characteristics of Rene 41 tubular panels installed as wing panels on a hypersonic wing test structure (HWTS) were determined nondestructively through use of a force/stiffness technique. The nondestructive buckling tests were carried out under different combined load conditions and different temperature environments. Two panels were subsequently tested to buckling failure in a universal tension compression testing machine. In spite of some data scattering because of large extrapolations of data points resulting from termination of the test at a somewhat low applied load, the overall test data correlated fairly well with theoretically predicted buckling interaction curves. The structural efficiency of the tubular panels was slightly higher than that of the beaded panels which they replaced.
Non-Ideal Detonation Properties of Ammonium Nitrate and Activated Carbon Mixtures
NASA Astrophysics Data System (ADS)
Miyake, Atsumi; Echigoya, Hiroshi; Kobayashi, Hidefumi; Ogawa, Terushige; Katoh, Katsumi; Kubota, Shiro; Wada, Yuji; Ogata, Yuji
To obtain a better understanding of detonation properties of ammonium nitrate (AN) and activated carbon (AC) mixtures, steel tube tests with several diameters were carried out for various compositions of powdered AN and AC mixtures and the influence of the charge diameter on the detonation velocity was investigated. The results showed that the detonation velocity increased with the increase of the charge diameter. The experimentally observed values were far below the theoretically predicted values made by the thermodynamic CHEETAH code and they showed so-called non-ideal detonation. The extrapolated detonation velocity of stoichiometric composition to the infinite diameter showed a good agreement with the theoretical value.
Wolter, J
1999-01-01
Pavlovian conditioning in animals is often evaluated by means of transfer of control experiments. With human subjects, however, only very few studies have been conducted and the outcomes were often not in accordance with theoretical explanations based on studies with animals. A theoretical framework is presented that tries to integrate the results of the human conditioning paradigm and the animal conditioning paradigm as well, with reference to the well-known Yerkes-Dodson law. The experimental study with human subjects (N = 24) confirmed the predictions out of this framework, when a procedure similar to animal research is applied.
Nimmo, J.R.; Rubin, J.; Hammermeister, D.P.
1987-01-01
A method has been developed to establish steady state flow of water in an unsaturated soil sample spinning in a centrifuge. Theoretical analysis predicts moisture conditions in the sample that depend strongly on soil type and certain operating parameters. For Oakley sand, measurements of flux, water content, and matric potential during and after centrifugation verify that steady state flow can be achieved. Experiments have confirmed the theoretical prediction of a nearly uniform moisture distribution for this medium and have demonstrated that the flow can be effectively one-dimensional. The method was used for steady state measurements of hydraulic conductivity K for relatively dry soil, giving values as low as 7.6 × 10−11 m/s with data obtained in a few hours. Darcy's law was tested by measuring K for different centrifugal driving forces but with the same water content. For the sand at a bulk density of 1.82 Mg/m3 and 27% saturation, results were consistent with Darcy's law for K equal to 5.22 × 10−10 m/s and forces ranging from 216 to 1650 times normal gravity.
A protective factors model for alcohol abuse and suicide prevention among Alaska Native youth.
Allen, James; Mohatt, Gerald V; Fok, Carlotta Ching Ting; Henry, David; Burkett, Rebekah
2014-09-01
This study provides an empirical test of a culturally grounded theoretical model for prevention of alcohol abuse and suicide risk with Alaska Native youth, using a promising set of culturally appropriate measures for the study of the process of change and outcome. This model is derived from qualitative work that generated an heuristic model of protective factors from alcohol (Allen et al. in J Prev Interv Commun 32:41-59, 2006; Mohatt et al. in Am J Commun Psychol 33:263-273, 2004a; Harm Reduct 1, 2004b). Participants included 413 rural Alaska Native youth ages 12-18 who assisted in testing a predictive model of Reasons for Life and Reflective Processes about alcohol abuse consequences as co-occurring outcomes. Specific individual, family, peer, and community level protective factor variables predicted these outcomes. Results suggest prominent roles for these predictor variables as intermediate prevention strategy target variables in a theoretical model for a multilevel intervention. The model guides understanding of underlying change processes in an intervention to increase the ultimate outcome variables of Reasons for Life and Reflective Processes regarding the consequences of alcohol abuse.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tayar, Jamie; Somers, Garrett; Pinsonneault, Marc H.
2017-05-01
In the updated APOGEE- Kepler catalog, we have asteroseismic and spectroscopic data for over 3000 first ascent red giants. Given the size and accuracy of this sample, these data offer an unprecedented test of the accuracy of stellar models on the post-main-sequence. When we compare these data to theoretical predictions, we find a metallicity dependent temperature offset with a slope of around 100 K per dex in metallicity. We find that this effect is present in all model grids tested, and that theoretical uncertainties in the models, correlated spectroscopic errors, and shifts in the asteroseismic mass scale are insufficient tomore » explain this effect. Stellar models can be brought into agreement with the data if a metallicity-dependent convective mixing length is used, with Δ α {sub ML,YREC} ∼ 0.2 per dex in metallicity, a trend inconsistent with the predictions of three-dimensional stellar convection simulations. If this effect is not taken into account, isochrone ages for red giants from the Gaia data will be off by as much as a factor of two even at modest deviations from solar metallicity ([Fe/H] = −0.5).« less
Family-supportive work environments and psychological strain: a longitudinal test of two theories.
Odle-Dusseau, Heather N; Herleman, Hailey A; Britt, Thomas W; Moore, Dewayne D; Castro, Carl A; McGurk, Dennis
2013-01-01
Based on the Job Demands-Resources (JDR) model (E. Demerouti, A. B. Bakker, F. Nachreiner, & W. B. Schaufeli, 2001, The job demands-resources model of burnout. Journal of Applied Psychology, 86, 499-512) and Conservation of Resources (COR) theory (S. E. Hobfoll, 2002, Social and psychological resources and adaptation. Review of General Psychology, 6, 307-324), we tested three competing models that predict different directions of causation for relationships over time between family-supportive work environments (FSWE) and psychological strain, with two waves of data from a military sample. Results revealed support for both the JDR and COR theories, first in the static model where FSWE at Time 1 predicted psychological strain at Time 2 and when testing the opposite direction, where psychological strain at Time 1 predicted FSWE at Time 2. For change models, FSWE predicted changes in psychological strain across time, although the reverse causation model was not supported (psychological strain at Time 1 did not predict changes in FSWE). Also, changes in FSWE across time predicted psychological strain at Time 2, whereas changes in psychological strain did not predict FSWE at Time 2. Theoretically, these results are important for the work-family interface in that they demonstrate the application of a systems approach to studying work and family interactions, as support was obtained for both the JDR model with perceptions of FSWE predicting psychological strain (in both the static and change models), and for COR theory where psychological strain predicts FSWE across time.
Beam Heating of Samples: Modeling and Verification. Part 2
NASA Technical Reports Server (NTRS)
Kazmierczak, Michael; Gopalakrishnan, Pradeep; Kumar, Raghav; Banerjee Rupak; Snell, Edward; Bellamy, Henry; Rosenbaum, Gerd; vanderWoerd, Mark
2006-01-01
Energy absorbed from the X-ray beam by the sample requires cooling by forced convection (i.e. cryostream) to minimize temperature increase and the damage caused to the sample by the X-ray heating. In this presentation we will first review the current theoretical models and recent studies in the literature, which predict the sample temperature rise for a given set of beam parameters. It should be noted that a common weakness of these previous studies is that none of them provide actual experimental confirmation. This situation is now remedied in our investigation where the problem of x-ray sample heating is taken up once more. We have theoretically investigated, and at the same time, in addition to the numerical computations, performed experiments to validate the predictions. We have modeled, analyzed and experimentally tested the temperature rise of a 1 mm diameter glass sphere (sample surrogate) exposed to an intense synchrotron X-ray beam, while it is being cooled in a uniform flow of nitrogen gas. The heat transfer, including external convection and internal heat conduction was theoretically modeled using CFD to predict the temperature variation in the sphere during cooling and while it was subjected to an undulator (ID sector 19) X-ray beam at the APS. The surface temperature of the sphere during the X-ray beam heating was measured using the infrared camera measurement technique described in a previous talk. The temperatures from the numerical predictions and experimental measurements are compared and discussed. Additional results are reported for the two different sphere sizes and for two different supporting pin orientations.
Heat Capacity Anomaly Near the Lower Critical Consolute Point of Triethylamine-Water
NASA Technical Reports Server (NTRS)
Flewelling, Anne C.; DeFonseka, Rohan J.; Khaleeli, Nikfar; Partee, J.; Jacobs, D. T.
1996-01-01
The heat capacity of the binary liquid mixture triethylamine-water has been measured near its lower critical consolute point using a scanning, adiabatic calorimeter. Two data runs are analyzed to provide heat capacity and enthalpy data that are fitted by equations with background terms and a critical term that includes correction to scaling. The critical exponent a was determined to be 0.107 +/- 0.006, consistent with theoretical predictions. When alpha was fixed at 0.11 to determine various amplitudes consistently, our values of A(+) and A(-) agreed with a previous heat capacity measurement, but the value of A(-) was inconsistent with values determined by density or refractive index measurements. While our value for the amplitude ratio A(+)/ A(-) = 0.56 +/- 0.02 was consistent with other recent experimental determinations in binary liquid mixtures, it was slightly larger than either theoretical predictions or recent experimental values in liquid-vapor systems. The correction to scaling amplitude ratio D(+)/D(-) = 0.5 +/- 0.1 was half of that predicted. As a result of several more precise theoretical calculations and experimental determinations, the two-scale-factor universality ratio X, which we found to be 0.019 +/- 0.003, now is consistent among experiments and theories. A new 'universal' amplitude ratio R(sup +/-)(sub Bcr) involving the amplitudes for the specific heat was tested. Our determination of R(sup +/-)(sub Bcr) = -0.5 +/- 0.1 and R(sup -)(sub Bcr) = 1.1 +/- 0.1 is smaller in magnitude than predicted and is the first such determination in a binary fluid mixture.
What should we want to know about our future? A Kantian view on predictive genetic testing.
Heinrichs, Bert
2005-01-01
Recent advances in genomic research have led to the development of new diagnostic tools, including tests which make it possible to predict the future occurrence of monogenetic diseases (e.g. Chorea Huntington) or to determine increased susceptibilities to the future development of more complex diseases (e.g. breast cancer). The use of such tests raises a number of ethical, legal and social issues which are usually discussed in terms of rights. However, in the context of predictive genetic tests a key question arises which lies beyond the concept of rights, namely, What should we want to know about our future? In the following I shall discuss this question against the background of Kant's Doctrine of Virtue. It will be demonstrated that the system of duties of virtue that Kant elaborates in the second part of his Metaphysics of Morals offers a theoretical framework for addressing the question of a proper scope of future knowledge as provided by genetic tests. This approach can serve as a source of moral guidance complementary to a justice perspective. It does, however, not rest on the-rather problematic--claim to be able to define what the "good life" is.
Hunt, Hillary R; Gross, Alan M
2009-11-01
Obesity is a world-wide health concern approaching epidemic proportions. Successful long-term treatment involves a combination of bariatric surgery, diet, and exercise. Social cognitive models, such as the Theory of Reasoned Action (TRA) and the Theory of Planned Behavior (TPB), are among the most commonly tested theories utilized in the prediction of exercise. As exercise is not a completely volitional behavior, it is hypothesized that the TPB is a superior theoretical model for the prediction of exercise intentions and behavior. This study tested validity of the TPB in a sample of bariatric patients and further validated its improvement over the TRA in predicting exercise adherence at different operative stages. Results generally confirmed research hypotheses. Superiority of the TPB model was validated in this sample of bariatric patients, and Perceived Behavioral Control emerged as the single-best predictor of both exercise intentions and self-reported behavior. Finally, results suggested that both subjective norms and attitudes toward exercise played a larger role in the prediction of intention and behavior than previously reported.
Carrión, Alicia; Miralles, Ramón; Lara, Guillermo
2014-09-01
In this paper, we present a novel and completely different approach to the problem of scattering material characterization: measuring the degree of predictability of the time series. Measuring predictability can provide information of the signal strength of the deterministic component of the time series in relation to the whole time series acquired. This relationship can provide information about coherent reflections in material grains with respect to the rest of incoherent noises that typically appear in non-destructive testing using ultrasonics. This is a non-parametric technique commonly used in chaos theory that does not require making any kind of assumptions about attenuation profiles. In highly scattering media (low SNR), it has been shown theoretically that the degree of predictability allows material characterization. The experimental results obtained in this work with 32 cement probes of 4 different porosities demonstrate the ability of this technique to do classification. It has also been shown that, in this particular application, the measurement of predictability can be used as an indicator of the percentages of porosity of the test samples with great accuracy. Copyright © 2014 Elsevier B.V. All rights reserved.
Central tendency effects in time interval reproduction in autism
Karaminis, Themelis; Cicchini, Guido Marco; Neil, Louise; Cappagli, Giulia; Aagten-Murphy, David; Burr, David; Pellicano, Elizabeth
2016-01-01
Central tendency, the tendency of judgements of quantities (lengths, durations etc.) to gravitate towards their mean, is one of the most robust perceptual effects. A Bayesian account has recently suggested that central tendency reflects the integration of noisy sensory estimates with prior knowledge representations of a mean stimulus, serving to improve performance. The process is flexible, so prior knowledge is weighted more heavily when sensory estimates are imprecise, requiring more integration to reduce noise. In this study we measure central tendency in autism to evaluate a recent theoretical hypothesis suggesting that autistic perception relies less on prior knowledge representations than typical perception. If true, autistic children should show reduced central tendency than theoretically predicted from their temporal resolution. We tested autistic and age- and ability-matched typical children in two child-friendly tasks: (1) a time interval reproduction task, measuring central tendency in the temporal domain; and (2) a time discrimination task, assessing temporal resolution. Central tendency reduced with age in typical development, while temporal resolution improved. Autistic children performed far worse in temporal discrimination than the matched controls. Computational simulations suggested that central tendency was much less in autistic children than predicted by theoretical modelling, given their poor temporal resolution. PMID:27349722
Humpback whale-generated ambient noise levels provide insight into singers' spatial densities.
Seger, Kerri D; Thode, Aaron M; Urbán-R, Jorge; Martínez-Loustalot, Pamela; Jiménez-López, M Esther; López-Arzate, Diana
2016-09-01
Baleen whale vocal activity can be the dominant underwater ambient noise source for certain locations and seasons. Previous wind-driven ambient-noise formulations have been adjusted to model ambient noise levels generated by random distributions of singing humpback whales in ocean waveguides and have been combined to a single model. This theoretical model predicts that changes in ambient noise levels with respect to fractional changes in singer population (defined as the noise "sensitivity") are relatively unaffected by the source level distributions and song spectra of individual humpback whales (Megaptera novaeangliae). However, the noise "sensitivity" does depend on frequency and on how the singers' spatial density changes with population size. The theoretical model was tested by comparing visual line transect surveys with bottom-mounted passive acoustic data collected during the 2013 and 2014 humpback whale breeding seasons off Los Cabos, Mexico. A generalized linear model (GLM) estimated the noise "sensitivity" across multiple frequency bands. Comparing the GLM estimates with the theoretical predictions suggests that humpback whales tend to maintain relatively constant spacing between one another while singing, but that individual singers either slightly increase their source levels or song duration, or cluster more tightly as the singing population increases.
Experimental and theoretical study of Rayleigh-Lamb wave propagation
NASA Technical Reports Server (NTRS)
Rogers, Wayne P.; Datta, Subhendu K.; Ju, T. H.
1990-01-01
Many space structures, such as the Space Station Freedom, contain critical thin-walled components. The structural integrity of thin-walled plates and shells can be monitored effectively using acoustic emission and ultrasonic testing in the Rayleigh-Lamb wave frequency range. A new PVDF piezoelectric sensor has been developed that is well suited to remote, inservice nondestructive evaluation of space structures. In the present study the new sensor was used to investigate Rayleigh-Lamb wave propagation in a plate. The experimental apparatus consisted of a glass plate (2.3 m x 25.4 mm x 5.6 mm) with PVDF sensor (3 mm diam.) mounted at various positions along its length. A steel ball impact served as a simulated acoustic emission source, producing surface waves, shear waves and longitudinal waves with dominant frequencies between 1 kHz and 200 kHz. The experimental time domain wave-forms were compared with theoretical predictions of the wave propagation in the plate. The model uses an analytical solution for the Green's function and the measured response at a single position to predict response at any other position in the plate. Close agreement was found between the experimental and theoretical results.
The neural mediators of kindness-based meditation: a theoretical model
Mascaro, Jennifer S.; Darcher, Alana; Negi, Lobsang T.; Raison, Charles L.
2015-01-01
Although kindness-based contemplative practices are increasingly employed by clinicians and cognitive researchers to enhance prosocial emotions, social cognitive skills, and well-being, and as a tool to understand the basic workings of the social mind, we lack a coherent theoretical model with which to test the mechanisms by which kindness-based meditation may alter the brain and body. Here, we link contemplative accounts of compassion and loving-kindness practices with research from social cognitive neuroscience and social psychology to generate predictions about how diverse practices may alter brain structure and function and related aspects of social cognition. Contingent on the nuances of the practice, kindness-based meditation may enhance the neural systems related to faster and more basic perceptual or motor simulation processes, simulation of another’s affective body state, slower and higher-level perspective-taking, modulatory processes such as emotion regulation and self/other discrimination, and combinations thereof. This theoretical model will be discussed alongside best practices for testing such a model and potential implications and applications of future work. PMID:25729374
Cavo, Marta; Scaglione, Silvia
2016-11-01
The really nontrivial goal of tissue engineering is combining all scaffold micro-architectural features, affecting both fluid-dynamical and mechanical performance, to obtain a fully functional implant. In this work we identified an optimal geometrical pattern for bone tissue engineering applications, best balancing several graft needs which correspond to competing design goals. In particular, we investigated the occurred changes in graft behavior by varying pore size (300μm, 600μm, 900μm), interpore distance (equal to pore size or 300μm fixed) and pores interconnection (absent, 45°-oriented, 90°-oriented). Mathematical considerations and Computational Fluid Dynamics (CFD) tools, here combined in a complete theoretical model, were carried out to this aim. Poly-lactic acid (PLA) based samples were realized by 3D printing, basing on the modeled architectures. A collagen (COL) coating was also realized on grafts surface and the interaction between PLA and COL, besides the protein contribution to graft bioactivity, was evaluated. Scaffolds were extensively characterized; human articular cells were used to test their biocompatibility and to evaluate the theoretical model predictions. Grafts fulfilled both the chemical and physical requirements. Finally, a good agreement was found between the theoretical model predictions and the experimental data, making these prototypes good candidates for bone graft replacements. Copyright © 2016 Elsevier B.V. All rights reserved.
Crack-growth behavior in thick welded plates of Inconel 718 at room and cryogenic temperatures
NASA Technical Reports Server (NTRS)
Forman, R. G.
1974-01-01
Results of mechanical-properties and axial-load fatigue and fracture tests performed on thick welded plates of Inconel 718 superalloy are presented. The test objectives were to determine the tensile strength properties and the crack-growth behavior in electron-beam, plasma-arc, and gas tungsten are welds for plates 1.90 cm (0.75 in) thick. Base-metal specimens were also tested to determine the flaw-growth behavior. The tests were performed in room-temperature-air and liquid nitrogen environments. The experimental crack-growth-rate data are correlated with theoretical crack-growth-rate predictions for semielliptical surface flaws.
Prediction of the interior noise levels of high-speed propeller-driven aircraft
NASA Technical Reports Server (NTRS)
Rennison, D. C.; Wilby, J. F.; Wilby, E. G.
1980-01-01
The theoretical basis for an analytical model developed to predict the interior noise levels of high-speed propeller-driven airplanes is presented. Particular emphasis is given to modeling the transmission of discrete tones through a fuselage element into a cavity, estimates for the mean and standard deviation of the acoustic power flow, the coupling between a non-homogeneous excitation and the fuselage vibration response, and the prediction of maximum interior noise levels. The model allows for convenient examination of the various roles of the excitation and fuselage structural characteristics on the fuselage vibration response and the interior noise levels, as is required for the design of model or prototype noise control validation tests.
Du, Hongfei; Li, Xiaoming; Lin, Danhua; Tam, Cheuk Chi
2014-01-01
The current study aimed to investigate the impact of individualism, collectivism, and hopelessness on substance use. Hopelessness was hypothesized as a mediator between individualism and substance use, and between collectivism and substance use. We tested the hypothesis using a survey of 641 young rural-to-urban migrants in China. Consistent with our hypotheses, individualistic orientation predicted increased hopelessness and subsequently predicted more substance use, whereas collectivistic orientation was associated with decreased hopelessness and subsequently predicted less substance use. Hopelessness fully mediated the relations between individualism and substance use and between collectivism and substance use. The theoretical and practical implications of these findings were discussed. PMID:25750778
NASA Technical Reports Server (NTRS)
Mayo, Alton P.
1959-01-01
Flapwise bending moments were calculated for a teetering rotor blade using a reasonably rapid theoretical method in which airloads obtained from wind-tunnel tests were employed. The calculated moments agreed reasonably well with those measured with strain gages under the same test conditions. The range of the tests included one hovering and two forward-flight conditions. The rotor speed for the test was very near blade resonance, and difficult-to-calculate resonance effects apparently were responsible for the largest differences between the calculated and measured harmonic components of blade bending moments. These differences, moreover, were largely nullified when the harmonic components were combined to give a comparison of the calculated and measured blade total- moment time histories. The degree of agreement shown is therefore considered adequate to warrant the use of the theoretical method in establishing and applying methods of prediction of rotor-blade fatigue loads. At the same time, the validity of the experimental methods of obtaining both airload and blade stress measurement is also indicated to be adequate for use in establishing improved methods for prediction of rotor-blade fatigue loads during the design stage. The blade stiffnesses and natural frequencies were measured and found to be in close agreement with calculated values; however, for a condition of blade resonance the use of the experimental stiffness values resulted in better agreement between calculated and measured blade stresses.
High energy density propulsion systems and small engine dynamometer
NASA Astrophysics Data System (ADS)
Hays, Thomas
2009-07-01
Scope and Method of Study. This study investigates all possible methods of powering small unmanned vehicles, provides reasoning for the propulsion system down select, and covers in detail the design and production of a dynamometer to confirm theoretical energy density calculations for small engines. Initial energy density calculations are based upon manufacturer data, pressure vessel theory, and ideal thermodynamic cycle efficiencies. Engine tests are conducted with a braking type dynamometer for constant load energy density tests, and show true energy densities in excess of 1400 WH/lb of fuel. Findings and Conclusions. Theory predicts lithium polymer, the present unmanned system energy storage device of choice, to have much lower energy densities than other conversion energy sources. Small engines designed for efficiency, instead of maximum power, would provide the most advantageous method for powering small unmanned vehicles because these engines have widely variable power output, loss of mass during flight, and generate rotational power directly. Theoretical predictions for the energy density of small engines has been verified through testing. Tested values up to 1400 WH/lb can be seen under proper operating conditions. The implementation of such a high energy density system will require a significant amount of follow-on design work to enable the engines to tolerate the higher temperatures of lean operation. Suggestions are proposed to enable a reliable, small-engine propulsion system in future work. Performance calculations show that a mature system is capable of month long flight times, and unrefueled circumnavigation of the globe.
Airfoil self-noise and prediction
NASA Technical Reports Server (NTRS)
Brooks, Thomas F.; Pope, D. Stuart; Marcolini, Michael A.
1989-01-01
A prediction method is developed for the self-generated noise of an airfoil blade encountering smooth flow. The prediction methods for the individual self-noise mechanisms are semiempirical and are based on previous theoretical studies and data obtained from tests of two- and three-dimensional airfoil blade sections. The self-noise mechanisms are due to specific boundary-layer phenomena, that is, the boundary-layer turbulence passing the trailing edge, separated-boundary-layer and stalled flow over an airfoil, vortex shedding due to laminar boundary layer instabilities, vortex shedding from blunt trailing edges, and the turbulent vortex flow existing near the tip of lifting blades. The predictions are compared successfully with published data from three self-noise studies of different airfoil shapes. An application of the prediction method is reported for a large scale-model helicopter rotor, and the predictions compared well with experimental broadband noise measurements. A computer code of the method is given.
NASA Technical Reports Server (NTRS)
Schweikhard, W. G.; Chen, Y. S.
1986-01-01
The Melick method of inlet flow dynamic distortion prediction by statistical means is outlined. A hypothetic vortex model is used as the basis for the mathematical formulations. The main variables are identified by matching the theoretical total pressure rms ratio with the measured total pressure rms ratio. Data comparisons, using the HiMAT inlet test data set, indicate satisfactory prediction of the dynamic peak distortion for cases with boundary layer control device vortex generators. A method for the dynamic probe selection was developed. Validity of the probe selection criteria is demonstrated by comparing the reduced-probe predictions with the 40-probe predictions. It is indicated that the the number of dynamic probes can be reduced to as few as two and still retain good accuracy.
McManus, I C; Dewberry, Chris; Nicholson, Sandra; Dowell, Jonathan S; Woolf, Katherine; Potts, Henry W W
2013-11-14
Measures used for medical student selection should predict future performance during training. A problem for any selection study is that predictor-outcome correlations are known only in those who have been selected, whereas selectors need to know how measures would predict in the entire pool of applicants. That problem of interpretation can be solved by calculating construct-level predictive validity, an estimate of true predictor-outcome correlation across the range of applicant abilities. Construct-level predictive validities were calculated in six cohort studies of medical student selection and training (student entry, 1972 to 2009) for a range of predictors, including A-levels, General Certificates of Secondary Education (GCSEs)/O-levels, and aptitude tests (AH5 and UK Clinical Aptitude Test (UKCAT)). Outcomes included undergraduate basic medical science and finals assessments, as well as postgraduate measures of Membership of the Royal Colleges of Physicians of the United Kingdom (MRCP(UK)) performance and entry in the Specialist Register. Construct-level predictive validity was calculated with the method of Hunter, Schmidt and Le (2006), adapted to correct for right-censorship of examination results due to grade inflation. Meta-regression analyzed 57 separate predictor-outcome correlations (POCs) and construct-level predictive validities (CLPVs). Mean CLPVs are substantially higher (.450) than mean POCs (.171). Mean CLPVs for first-year examinations, were high for A-levels (.809; CI: .501 to .935), and lower for GCSEs/O-levels (.332; CI: .024 to .583) and UKCAT (mean = .245; CI: .207 to .276). A-levels had higher CLPVs for all undergraduate and postgraduate assessments than did GCSEs/O-levels and intellectual aptitude tests. CLPVs of educational attainment measures decline somewhat during training, but continue to predict postgraduate performance. Intellectual aptitude tests have lower CLPVs than A-levels or GCSEs/O-levels. Educational attainment has strong CLPVs for undergraduate and postgraduate performance, accounting for perhaps 65% of true variance in first year performance. Such CLPVs justify the use of educational attainment measure in selection, but also raise a key theoretical question concerning the remaining 35% of variance (and measurement error, range restriction and right-censorship have been taken into account). Just as in astrophysics, 'dark matter' and 'dark energy' are posited to balance various theoretical equations, so medical student selection must also have its 'dark variance', whose nature is not yet properly characterized, but explains a third of the variation in performance during training. Some variance probably relates to factors which are unpredictable at selection, such as illness or other life events, but some is probably also associated with factors such as personality, motivation or study skills.
2013-01-01
Background Measures used for medical student selection should predict future performance during training. A problem for any selection study is that predictor-outcome correlations are known only in those who have been selected, whereas selectors need to know how measures would predict in the entire pool of applicants. That problem of interpretation can be solved by calculating construct-level predictive validity, an estimate of true predictor-outcome correlation across the range of applicant abilities. Methods Construct-level predictive validities were calculated in six cohort studies of medical student selection and training (student entry, 1972 to 2009) for a range of predictors, including A-levels, General Certificates of Secondary Education (GCSEs)/O-levels, and aptitude tests (AH5 and UK Clinical Aptitude Test (UKCAT)). Outcomes included undergraduate basic medical science and finals assessments, as well as postgraduate measures of Membership of the Royal Colleges of Physicians of the United Kingdom (MRCP(UK)) performance and entry in the Specialist Register. Construct-level predictive validity was calculated with the method of Hunter, Schmidt and Le (2006), adapted to correct for right-censorship of examination results due to grade inflation. Results Meta-regression analyzed 57 separate predictor-outcome correlations (POCs) and construct-level predictive validities (CLPVs). Mean CLPVs are substantially higher (.450) than mean POCs (.171). Mean CLPVs for first-year examinations, were high for A-levels (.809; CI: .501 to .935), and lower for GCSEs/O-levels (.332; CI: .024 to .583) and UKCAT (mean = .245; CI: .207 to .276). A-levels had higher CLPVs for all undergraduate and postgraduate assessments than did GCSEs/O-levels and intellectual aptitude tests. CLPVs of educational attainment measures decline somewhat during training, but continue to predict postgraduate performance. Intellectual aptitude tests have lower CLPVs than A-levels or GCSEs/O-levels. Conclusions Educational attainment has strong CLPVs for undergraduate and postgraduate performance, accounting for perhaps 65% of true variance in first year performance. Such CLPVs justify the use of educational attainment measure in selection, but also raise a key theoretical question concerning the remaining 35% of variance (and measurement error, range restriction and right-censorship have been taken into account). Just as in astrophysics, ‘dark matter’ and ‘dark energy’ are posited to balance various theoretical equations, so medical student selection must also have its ‘dark variance’, whose nature is not yet properly characterized, but explains a third of the variation in performance during training. Some variance probably relates to factors which are unpredictable at selection, such as illness or other life events, but some is probably also associated with factors such as personality, motivation or study skills. PMID:24229353
Barlett, Christopher; Chamberlin, Kristina; Witkower, Zachary
2017-04-01
The Barlett and Gentile Cyberbullying Model (BGCM) is a learning-based theory that posits the importance of positive cyberbullying attitudes predicting subsequent cyberbullying perpetration. Furthermore, the tenants of the BGCM state that cyberbullying attitude are likely to form when the online aggressor believes that the online environment allows individuals of all physical sizes to harm others and they are perceived as anonymous. Past work has tested parts of the BGCM; no study has used longitudinal methods to examine this model fully. The current study (N = 161) employed a three-wave longitudinal design to test the BGCM. Participants (age range: 18-24) completed measures of the belief that physical strength is irrelevant online and anonymity perceptions at Wave 1, cyberbullying attitudes at Wave 2, and cyberbullying perpetration at Wave 3. Results showed strong support for the BGCM: anonymity perceptions and the belief that physical attributes are irrelevant online at Wave 1 predicted Wave 2 cyberbullying attitudes, which predicted subsequent Wave 3 cyberbullying perpetration. These results support the BGCM and are the first to show empirical support for this model. Aggr. Behav. 43:147-154, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.
Evaluation of a locally homogeneous flow model of spray combustion
NASA Technical Reports Server (NTRS)
Mao, C. P.; Szekely, G. A., Jr.; Faeth, G. M.
1980-01-01
A model of spray combustion which employs a second-order turbulence model was developed. The assumption of locally homogeneous flow is made, implying infinitely fast transport rates between the phase. Measurements to test the model were completed for a gaseous n-propane flame and an air atomized n-pentane spray flame, burning in stagnant air at atmospheric pressure. Profiles of mean velocity and temperature, as well as velocity fluctuations and Reynolds stress, were measured in the flames. The predictions for the gas flame were in excellent agreement with the measurements. The predictions for the spray were qualitatively correct, but effects of finite rate interphase transport were evident, resulting in a overstimation of the rate development of the flow. Predictions of spray penetration length at high pressures, including supercritical combustion conditions, were also completed for comparison with earlier measurements. Test conditions involved a pressure atomized n-pentane spray, burning in stagnant air at pressures of 3, 5, and 9 MPa. The comparison between predictions and measurements was fair. This is not a very sensitive test of the model, however, and further high pressure experimental and theoretical results are needed before a satisfactory assessment of the locally homogeneous flow approximation can be made.
Field, J; Solís, C R; Queller, D C; Strassmann, J E
1998-06-01
Recent models postulate that the members of a social group assess their ecological and social environments and agree a "social contract" of reproductive partitioning (skew). We tested social contracts theory by using DNA microsatellites to measure skew in 24 cofoundress associations of paper wasps, Polistes bellicosus. In contrast to theoretical predictions, there was little variation in cofoundress relatedness, and relatedness either did not predict skew or was negatively correlated with it; the dominant/subordinate size ratio, assumed to reflect relative fighting ability, did not predict skew; and high skew was associated with decreased aggression by the rank 2 subordinate toward the dominant. High skew was associated with increased group size. A difficulty with measuring skew in real systems is the frequent changes in group composition that commonly occur in social animals. In P. bellicosus, 61% of egg layers and an unknown number of non-egg layers were absent by the time nests were collected. The social contracts models provide an attractive general framework linking genetics, ecology, and behavior, but there have been few direct tests of their predictions. We question assumptions underlying the models and suggest directions for future research.
NASA Technical Reports Server (NTRS)
Carlson, J. R.; Pendergraft, O. C., Jr.; Burley, J. R., II
1986-01-01
A three-dimensional subsonic aerodynamic panel code (VSAERO) was used to predict the effects of upper and lower external nozzle flap geometry on the external afterbody/nozzle pressure coefficient distributions and external nozzle drag of nonaxisymmetric convergent-divergent exhaust nozzles having parallel external sidewalls installed on a generic twin-engine high performance aircraft model. Nozzle static pressure coefficient distributions along the upper and lower surfaces near the model centerline and near the outer edges (corner) of the two surfaces were calculated, and nozzle drag was predicted using these surface pressure distributions. A comparison between the theoretical predictions and experimental wind tunnel data is made to evaluate the utility of the code in calculating the flow about these types of non-axisymmetric afterbody configurations. For free-stream Mach numbers of 0.60 and 0.90, the conditions where the flows were attached on the boattails yielded the best comparison between the theoretical predictions and the experimental data. For the Boattail terminal angles of greater than 15 deg., the experimental data for M = 0.60 and 0.90 indicated areas of separated flow, so the theoretical predictions failed to match the experimental data. Even though calculations of regions of separated flows are within the capabilities of the theoretical method, acceptable solutions were not obtained.
MacKenzie, R K; Dowell, J; Ayansina, D; Cleland, J A
2017-05-01
Traditional methods of assessing personality traits in medical school selection have been heavily criticised. To address this at the point of selection, "non-cognitive" tests were included in the UK Clinical Aptitude Test, the most widely-used aptitude test in UK medical education (UKCAT: http://www.ukcat.ac.uk/ ). We examined the predictive validity of these non-cognitive traits with performance during and on exit from medical school. We sampled all students graduating in 2013 from the 30 UKCAT consortium medical schools. Analysis included: candidate demographics, UKCAT non-cognitive scores, medical school performance data-the Educational Performance Measure (EPM) and national exit situational judgement test (SJT) outcomes. We examined the relationships between these variables and SJT and EPM scores. Multilevel modelling was used to assess the relationships adjusting for confounders. The 3343 students who had taken the UKCAT non-cognitive tests and had both EPM and SJT data were entered into the analysis. There were four types of non-cognitive test: (1) libertariancommunitarian, (2) NACE-narcissism, aloofness, confidence and empathy, (3) MEARS-self-esteem, optimism, control, self-discipline, emotional-nondefensiveness (END) and faking, (4) an abridged version of 1 and 2 combined. Multilevel regression showed that, after correcting for demographic factors, END predicted SJT and EPM decile. Aloofness and empathy in NACE were predictive of SJT score. This is the first large-scale study examining the relationship between performance on non-cognitive selection tests and medical school exit assessments. The predictive validity of these tests was limited, and the relationships revealed do not fit neatly with theoretical expectations. This study does not support their use in selection.
Tonkin, Matthew; Woodhams, Jessica; Bond, John W; Loe, Trudy
2010-01-01
Geographical profiling is an investigative methodology sometimes employed by the police to predict the residence of an unknown offender from the locations of his/her crimes. The validity of geographical profiling, however, has not been fully explored for certain crime types. This study, therefore, presents a preliminary test of the potential for geographical profiling with a sample of 145 serial vehicle thieves from the U.K. The behavioural assumptions underlying geographical profiling (distance decay and domocentricity) are tested and a simple practical test of profiling using the spatial mean is presented. There is evidence for distance decay but not domocentricity among the spatial behaviour of car thieves from the U.K. A degree of success was achieved when applying the spatial mean on a case-by-case basis. The level of success varied, however, and neither series length in days nor number of crimes could account for the variation. The findings question previously held assumptions regarding geographical profiling and have potential theoretical and practical implications for the study and investigation of vehicle theft in the U.K. 2009 John Wiley & Sons, Ltd.
High-intensity sound in air saturated fibrous bulk porous materials
NASA Technical Reports Server (NTRS)
Kuntz, H. L., II
1982-01-01
The interaction high-intensity sound with bulk porous materials in porous materials including Kevlar 29 is reported. The nonlinear behavior of the materials was described by dc flow resistivity tests. Then acoustic propagation and reflection were measured and small signal broadband measurements of phase speed and attenuation were carried out. High-intensity tests were made with 1, 2, and 3 kHz tone bursts to measure harmonic generation and extra attenuation of the fundamental. Small signal standing wave tests measured impedence between 0.1 and 3.5 kHz. High level tests with single cycle tone bursts at 1 to 4 kHz show that impedance increases with intensity. A theoretical analysis is presented for high-porosity, rigid-frame, isothermal materials. One dimensional equations of motion are derived and solved by perturbation. The experiments show that there is excess attenuation of the fundamental component and in some cases a close approach to saturation. A separate theoretical model, developed to explain the excess attenuation, yields predictions that are in good agreement with the measurements. Impedance and attenuation at high intensities are modeled.
Does the continuum theory of dynamic fracture work?
NASA Astrophysics Data System (ADS)
Kessler, David A.; Levine, Herbert
2003-09-01
We investigate the validity of the linear elastic fracture mechanics approach to dynamic fracture. We first test the predictions in a lattice simulation, using a formula of Eshelby for the time-dependent stress intensity factor. Excellent agreement with the theory is found. We then use the same method to analyze the experiment of Sharon and Fineberg. The data here are not consistent with the theoretical expectation.
In My Own Time: Tuition Fees, Class Time and Student Effort in Non-Formal (Or Continuing) Education
ERIC Educational Resources Information Center
Bolli, Thomas; Johnes, Geraint
2015-01-01
We develop and empirically test a model which examines the impact of changes in class time and tuition fees on student effort in the form of private study. The data come from the European Union's Adult Education Survey, conducted over the period 2005-2008. We find, in line with theoretical predictions, that the time students devote to private…
ERIC Educational Resources Information Center
Myeong, Jeon-ok; Crawley, Frank E.
The purpose of a study was to provide some practical and theoretical suggestions to science educators in the United States and Korea who are struggling to attract more students to study science and pursue science-related careers. Two research questions were addressed: (1) What are the determinants of Korean high-school students' track choice…
Dropping Out of High School: An Application of the Theory of Reasoned Action.
ERIC Educational Resources Information Center
Prestholdt, Perry H.; Fisher, Jack L.
To develop and test a theoretical model, based on the Theory of Reasoned Action (Fishbein and Ajzen, 1975), for understanding and predicting the decision to stay in or drop out of school, to identify the specific beliefs that are the basis of that decision, and to evaluate the use of moderator variables (sex, race) to individualize the model,…
ERIC Educational Resources Information Center
Park, Hee Sun; Levine, Timothy R.; Kingsley Westerman, Catherine Y.; Orfgen, Tierney; Foregger, Sarah
2007-01-01
Involvement has long been theoretically specified as a crucial factor determining the persuasive impact of messages. In social judgment theory, ego-involvement makes people more resistant to persuasion, whereas in dual-process models, high-involvement people are susceptible to persuasion when argument quality is high. It is argued that these…
Concurrent and Predictive Validity of Parent Reports of Child Language at Ages 2 and 3 Years
ERIC Educational Resources Information Center
Feldman, Heidi M.; Dale, Philip S.; Campbell, Thomas F.; Colborn, D. Kathleen; Kurs-Lasky, Marcia; Rockette, Howard E.; Paradise, Jack L.
2005-01-01
The MacArthur-Bates Communicative Development Inventories (CDI; Dale, 1996; Fenson et al., 1994), parent reports about language skills, are being used increasingly in studies of theoretical and public health importance. This study (N=113) correlated scores on the CDI at ages 2 and 3 years with scores at age 3 years on tests of cognition and…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Schreck, S.; Sant, T.; Micallef, D.
Wind turbine structures and components suffer excessive loads and premature failures when key aerodynamic phenomena are not well characterized, fail to be understood, or are inaccurately predicted. Turbine blade rotational augmentation remains incompletely characterized and understood, thus limiting robust prediction for design. Pertinent rotational augmentation research including experimental, theoretical, and computational work has been pursued for some time, but large scale wind tunnel testing is a relatively recent development for investigating wind turbine blade aerodynamics. Because of their large scale and complementary nature, the MEXICO and UAE Phase VI wind tunnel experiments offer unprecedented synergies to better characterize and understandmore » rotational augmentation of blade aerodynamics.« less
Seismic resonances of acoustic cavities
NASA Astrophysics Data System (ADS)
Schneider, F. M.; Esterhazy, S.; Perugia, I.; Bokelmann, G.
2016-12-01
The goal of an On-Site Inspection (OSI) is to clarify at a possible testsite whether a member state of the Comprehensive nuclear Test Ban Treaty (CTBT)has violated its rules by conducting a underground nuclear test. Compared toatmospheric and underwater tests underground nuclear explosions are the mostdifficult to detect.One primary structural target for the field team during an OSI is the detectionof an underground cavity, created by underground nuclear explosions. Theapplication of seismic-resonances of the cavity for its detection has beenproposed in the CTBT by mentioning "resonance seismometry" as possibletechnique during OSIs. We modeled the interaction of a seismic wave-field withan underground cavity by a sphere filled with an acoustic medium surrounded byan elastic full space. For this setting the solution of the seismic wave-fieldcan be computed analytically. Using this approach the appearance of acousticresonances can be predicted in the theoretical calculations. Resonance peaksappear in the spectrum derived for the elastic domain surrounding the acousticcavity, which scale in width with the density of the acoustic medium. For lowdensities in the acoustic medium as for an gas-filled cavity, the spectralpeaks become very narrow and therefore hard to resolve. The resonancefrequencies, however can be correlated to the discrete set of eigenmodes of theacoustic cavity and can thus be predicted if the dimension of the cavity isknown. Origin of the resonance peaks are internal reverberations of wavescoupling in the acoustic domain and causing an echoing signal that couples outto the elastic domain again. In the gas-filled case the amplitudes in timedomain are very low.Beside theoretical considerations we seek to find real data examples fromsimilar settings. As example we analyze a 3D active seismic data set fromFelsőpetény, Hungary that has been conducted between 2012 and 2014 on behalf ofthe CTBTO. In the subsurface of this area a former clay mine is situated, whichis connected to a karst cave of 30 m diameter in 70 m depth. Our aim is toinvestigate whether resonances predicted from theoretical models can be alsoobserved in data from such real experiments. Observation of spectral resonantpeaks could serve as the foundation of a cavity detection method that could beutilized for nuclear verification.
Gucciardi, Daniel F; Jackson, Ben
2015-01-01
Fostering individuals' long-term participation in activities that promote positive development such as organised sport is an important agenda for research and practice. We integrated the theories of planned behaviour (TPB) and basic psychological needs (BPN) to identify factors associated with young adults' continuation in organised sport over a 12-month period. Prospective study, including an online psycho-social assessment at Time 1 and an assessment of continuation in sport approximately 12 months later. Participants (N=292) aged between 17 and 21 years (M=18.03; SD=1.29) completed an online survey assessing the theories of planned behaviour and basic psychological needs constructs. Bayesian structural equation modelling (BSEM) was employed to test the hypothesised theoretical sequence, using informative priors for structural relations based on empirical and theoretical expectations. The analyses revealed support for the robustness of the hypothesised theoretical model in terms of the pattern of relations as well as the direction and strength of associations among the constructs derived from quantitative summaries of existing research and theoretical expectations. The satisfaction of basic psychological needs was associated with more positive attitudes, higher levels of perceived behavioural control, and more favourable subjective norms; positive attitudes and perceived behavioural control were associated with higher behavioural intentions; and both intentions and perceived behavioural control predicted sport continuation. This study demonstrated the utility of Bayesian structural equation modelling for testing the robustness of an integrated theoretical model, which is informed by empirical evidence from meta-analyses and theoretical expectations, for understanding sport continuation. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.
Application of FLEET Velocimetry in the NASA Langley 0.3-meter Transonic Cryogenic Tunnel
NASA Technical Reports Server (NTRS)
Burns, Ross A.; Danehy, Paul M.; Halls, Benjamin R.; Jiang, Naibo
2015-01-01
Femtosecond laser electronic excitation and tagging (FLEET) velocimetry is demonstrated in a large-scale transonic cryogenic wind tunnel. Test conditions include total pressures, total temperatures, and Mach numbers ranging from 15 to 58 psia, 200 to 295 K, and 0.2 to 0.75, respectively. Freestream velocity measurements exhibit accuracies within 1 percent and precisions better than 1 m/s. The measured velocities adhere closely to isentropic flow theory over the domain of temperatures and pressures that were tested. Additional velocity measurements are made within the tunnel boundary layer; virtual trajectories traced out by the FLEET signal are indicative of the characteristic turbulent behavior in this region of the flow, where the unsteadiness increases demonstrably as the wall is approached. Mean velocities taken within the boundary layer are in agreement with theoretical velocity profiles, though the fluctuating velocities exhibit a greater deviation from theoretical predictions.
Analysis and testing of a new method for drop size measurement using laser scatter interferometry
NASA Technical Reports Server (NTRS)
Bachalo, W. D.; Houser, M. J.
1984-01-01
Research was conducted on a laser light scatter detection method for measuring the size and velocity of spherical particles. The method is based upon the measurement of the interference fringe pattern produced by spheres passing through the intersection of two laser beams. A theoretical analysis of the method was carried out using the geometrical optics theory. Experimental verification of the theory was obtained by using monodisperse droplet streams. Several optical configurations were tested to identify all of the parametric effects upon the size measurements. Both off-axis forward and backscatter light detection were utilized. Simulated spray environments and fuel spray nozzles were used in the evaluation of the method. The measurements of the monodisperse drops showed complete agreement with the theoretical predictions. The method was demonstrated to be independent of the beam intensity and extinction resulting from the surrounding drops. Signal processing concepts were considered and a method was selected for development.
Brian K. Via; chi L. So; Leslie H. Groom; Todd F. Shupe; michael Stine; Jan Wikaira
2007-01-01
A theoretical model was built predicting the relationship between microfibril angle and lignin content at the Angstrom (A) level. Both theoretical and statistical examination of experimental data supports a square root transformation of lignin to predict microfibril angle. The experimental material used came from 10 longleaf pine (Pinus palustris)...
Analysis and design of a second-order digital phase-locked loop
NASA Technical Reports Server (NTRS)
Blasche, P. R.
1979-01-01
A specific second-order digital phase-locked loop (DPLL) was modeled as a first-order Markov chain with alternatives. From the matrix of transition probabilities of the Markov chain, the steady-state phase error of the DPLL was determined. In a similar manner the loop's response was calculated for a fading input. Additionally, a hardware DPLL was constructed and tested to provide a comparison to the results obtained from the Markov chain model. In all cases tested, good agreement was found between the theoretical predictions and the experimental data.
Huebner, David M; Perry, Nicholas S
2015-10-01
Behavioral interventions to reduce sexual risk behavior depend on strong health behavior theory. By identifying the psychosocial variables that lead causally to sexual risk, theories provide interventionists with a guide for how to change behavior. However, empirical research is critical to determining whether a particular theory adequately explains sexual risk behavior. A large body of cross-sectional evidence, which has been reviewed elsewhere, supports the notion that certain theory-based constructs (e.g., self-efficacy) are correlates of sexual behavior. However, given the limitations of inferring causality from correlational research, it is essential that we review the evidence from more methodologically rigorous studies (i.e., longitudinal and experimental designs). This systematic review identified 44 longitudinal studies in which investigators attempted to predict sexual risk from psychosocial variables over time. We also found 134 experimental studies (i.e., randomized controlled trials of HIV interventions), but of these only 9 (6.7 %) report the results of mediation analyses that might provide evidence for the validity of health behavior theories in predicting sexual behavior. Results show little convergent support across both types of studies for most traditional, theoretical predictors of sexual behavior. This suggests that the field must expand the body of empirical work that utilizes the most rigorous study designs to test our theoretical assumptions. The inconsistent results of existing research would indicate that current theoretical models of sexual risk behavior are inadequate, and may require expansion or adaptation.
NASA Technical Reports Server (NTRS)
Kattan, Michael W.; Hess, Kenneth R.; Kattan, Michael W.
1998-01-01
New computationally intensive tools for medical survival analyses include recursive partitioning (also called CART) and artificial neural networks. A challenge that remains is to better understand the behavior of these techniques in effort to know when they will be effective tools. Theoretically they may overcome limitations of the traditional multivariable survival technique, the Cox proportional hazards regression model. Experiments were designed to test whether the new tools would, in practice, overcome these limitations. Two datasets in which theory suggests CART and the neural network should outperform the Cox model were selected. The first was a published leukemia dataset manipulated to have a strong interaction that CART should detect. The second was a published cirrhosis dataset with pronounced nonlinear effects that a neural network should fit. Repeated sampling of 50 training and testing subsets was applied to each technique. The concordance index C was calculated as a measure of predictive accuracy by each technique on the testing dataset. In the interaction dataset, CART outperformed Cox (P less than 0.05) with a C improvement of 0.1 (95% Cl, 0.08 to 0.12). In the nonlinear dataset, the neural network outperformed the Cox model (P less than 0.05), but by a very slight amount (0.015). As predicted by theory, CART and the neural network were able to overcome limitations of the Cox model. Experiments like these are important to increase our understanding of when one of these new techniques will outperform the standard Cox model. Further research is necessary to predict which technique will do best a priori and to assess the magnitude of superiority.
Miguel, Elizabeth L M; Silva, Poliana L; Pliego, Josefredo R
2014-05-29
Methanol is a widely used solvent for chemical reactions and has solvation properties similar to those of water. However, the performance of continuum solvation models in this solvent has not been tested yet. In this report, we have investigated the performance of the SM8 and SMD models for pKa prediction of 26 carboxylic acids, 24 phenols, and 23 amines in methanol. The gas phase contribution was included at the X3LYP/TZVPP+diff//X3LYP/DZV+P(d) level. Using the proton exchange reaction with acetic acid, phenol, and ammonia as reference species leads to RMS error in the range of 1.4 to 3.6 pKa units. This finding suggests that the performance of the continuum models for methanol is similar to that found for aqueous solvent. Application of simple empirical correction through a linear equation leads to accurate pKa prediction, with uncertainty less than 0.8 units with the SM8 method. Testing with the less expensive PBE1PBE/6-311+G** method results in a slight improvement in the results.
2013-04-01
The main aims of the current research were to determine when children develop a temporally extended self (TES) and what factors contribute to its development. However, in order to address these aims it was important to, first, assess whether the test of delayed self-recognition (DSR) is a valid measure for the development of the TES, and, second, to propose and evaluate a theoretical model that describes what factors influence the development of the TES. The validity of the DSR test was verified by comparing the performance of 57 children on the DSR test to their performance on a meta-representational task (modified false belief task) and to a task that was essentially the same as the DSR test but was specifically designed to rely on the capacity to entertain secondary representations (i.e., surprise body task). Longitudinal testing of the children showed that at the mental age (MA) of 2.5 years they failed the DSR test, despite training them to understand the intended functions of the medium used in the DSR test; whereas, with training, children at the MA of 3.0 and 3.5 years exhibited DSR. Children at the MA of 4 years exhibited DSR without any training. Finally, results suggest that children's meta-representational ability was the only factor that contributed to the prediction of successful performance on the DSR test, and thus to the emergence of the TES. Furthermore, prospective longitudinal data revealed that caregiver conversational style was the only factor that contributed to the prediction of level of training required to pass the DSR test. That is, children of low-elaborative caregivers required significantly more training to pass the DSR test than children of high-elaborative caregivers, indicating that children who received more elaborative conversational input from their caregivers had a more advanced understanding of their TES. © 2013 The Society for Research in Child Development, Inc.
NASA Astrophysics Data System (ADS)
Kesler, Steven R.
The lifting line theory was first developed by Prandtl and was used primarily on analysis of airplane wings. Though the theory is about one hundred years old, it is still used in the initial calculations to find the lift of a wing. The question that guided this thesis was, "How close does Prandtl's lifting line theory predict the thrust of a propeller?" In order to answer this question, an experiment was designed that measured the thrust of a propeller for different speeds. The measured thrust was compared to what the theory predicted. In order to do this experiment and analysis, a propeller needed to be used. A walnut wood ultralight propeller was chosen that had a 1.30 meter (51 inches) length from tip to tip. In this thesis, Prandtl's lifting line theory was modified to account for the different incoming velocity depending on the radial position of the airfoil. A modified equation was used to reflect these differences. A working code was developed based on this modified equation. A testing rig was built that allowed the propeller to be rotated at high speeds while measuring the thrust. During testing, the rotational speed of the propeller ranged from 13-43 rotations per second. The thrust from the propeller was measured at different speeds and ranged from 16-33 Newton's. The test data were then compared to the theoretical results obtained from the lifting line code. A plot in Chapter 5 (the results section) shows the theoretical vs. actual thrust for different rotational speeds. The theory over predicted the actual thrust of the propeller. Depending on the rotational speed, the error was: at low speeds 36%, at low to moderate speeds 84%, and at high speeds the error increased to 195%. Different reasons for these errors are discussed.
Construction and evaluation of FiND, a fall risk prediction model of inpatients from nursing data.
Yokota, Shinichiroh; Ohe, Kazuhiko
2016-04-01
To construct and evaluate an easy-to-use fall risk prediction model based on the daily condition of inpatients from secondary use electronic medical record system data. The present authors scrutinized electronic medical record system data and created a dataset for analysis by including inpatient fall report data and Intensity of Nursing Care Needs data. The authors divided the analysis dataset into training data and testing data, then constructed the fall risk prediction model FiND from the training data, and tested the model using the testing data. The dataset for analysis contained 1,230,604 records from 46,241 patients. The sensitivity of the model constructed from the training data was 71.3% and the specificity was 66.0%. The verification result from the testing dataset was almost equivalent to the theoretical value. Although the model's accuracy did not surpass that of models developed in previous research, the authors believe FiND will be useful in medical institutions all over Japan because it is composed of few variables (only age, sex, and the Intensity of Nursing Care Needs items), and the accuracy for unknown data was clear. © 2016 Japan Academy of Nursing Science.
NASA Astrophysics Data System (ADS)
Arshad, Muhammad Azeem; Maaroufi, AbdelKrim
2018-07-01
A beginning has been made in the present study regarding the accurate lifetime predictions of polymer solar cells. Certain reservations about the conventionally employed temperature accelerated lifetime measurements test for its unworthiness of predicting reliable lifetimes of polymer solar cells are brought into light. Critical issues concerning the accelerated lifetime testing include, assuming reaction mechanism instead of determining it, and relying solely on the temperature acceleration of a single property of material. An advanced approach comprising a set of theoretical models to estimate the accurate lifetimes of polymer solar cells is therefore suggested in order to suitably alternate the accelerated lifetime testing. This approach takes into account systematic kinetic modeling of various possible polymer degradation mechanisms under natural weathering conditions. The proposed kinetic approach is substantiated by its applications on experimental aging data-sets of polymer solar materials/solar cells including, P3HT polymer film, bulk heterojunction (MDMO-PPV:PCBM) and dye-sensitized solar cells. Based on the suggested approach, an efficacious lifetime determination formula for polymer solar cells is derived and tested on dye-sensitized solar cells. Some important merits of the proposed method are also pointed out and its prospective applications are discussed.
Development and fabrication of improved Schottky power diodes
NASA Technical Reports Server (NTRS)
Cordes, L. F.; Garfinkel, M.; Taft, E. A.
1975-01-01
Reproducible methods for the fabrication of silicon Schottky diodes have been developed for tungsten, aluminum, conventional platinum silicide, and low temperature platinum silicide. Barrier heights and barrier lowering under reverse bias have been measured, permitting the accurate prediction of forward and reverse diode characteristics. Processing procedures have been developed that permit the fabrication of large area (about 1 sq cm) mesageometry power Schottky diodes with forward and reverse characteristics that approach theoretical values. A theoretical analysis of the operation of bridge rectifier circuits has been performed, which indicates the ranges of frequency and voltage for which Schottky rectifiers are preferred to p-n junctions. Power Schottky rectifiers have been fabricated and tested for voltage ratings up to 140 volts.
The lambda point experiment in microgravity
NASA Technical Reports Server (NTRS)
Lipa, J. A.
1988-01-01
The motivation and potential for performing very high resolution measurements of the heat capacity singularity at the lambda point of helium in microgravity conditions was briefly discussed. It is clear that tests extending deep into the asymptotic region can be performed, where the theoretical predictions take on their simplest form. This advantageous situation should lead to a major improvement in the understanding of the range of applicability of current theoretical ideas in this field. The lambda transition holds out the prospect of giving the maximum advance of any system, and with the application of cryogenic techniques, the potential of this system can be realized. The technology for the initial experiments is already developed, and results could be obtained in 1990.
Convolute laminations — a theoretical analysis: example of a Pennsylvanian sandstone
NASA Astrophysics Data System (ADS)
Visher, Glenn S.; Cunningham, Russ D.
1981-03-01
Data from an outcropping laminated interval were collected and analyzed to test the applicability of a theoretical model describing instability of layered systems. Rayleigh—Taylor wave perturbations result at the interface between fluids of contrasting density, viscosity, and thickness. In the special case where reverse density and viscosity interlaminations are developed, the deformation response produces a single wave with predictable amplitudes, wavelengths, and amplification rates. Physical measurements from both the outcropping section and modern sediments suggest the usefulness of the model for the interpretation of convolute laminations. Internal characteristics of the stratigraphic interval, and the developmental sequence of convoluted beds, are used to document the developmental history of these structures.
Dyson, Greg; Frikke-Schmidt, Ruth; Nordestgaard, Børge G; Tybjaerg-Hansen, Anne; Sing, Charles F
2009-05-01
This article extends the Patient Rule-Induction Method (PRIM) for modeling cumulative incidence of disease developed by Dyson et al. (Genet Epidemiol 31:515-527) to include the simultaneous consideration of non-additive combinations of predictor variables, a significance test of each combination, an adjustment for multiple testing and a confidence interval for the estimate of the cumulative incidence of disease in each partition. We employ the partitioning algorithm component of the Combinatorial Partitioning Method to construct combinations of predictors, permutation testing to assess the significance of each combination, theoretical arguments for incorporating a multiple testing adjustment and bootstrap resampling to produce the confidence intervals. An illustration of this revised PRIM utilizing a sample of 2,258 European male participants from the Copenhagen City Heart Study is presented that assesses the utility of genetic variants in predicting the presence of ischemic heart disease beyond the established risk factors.
Dyson, Greg; Frikke-Schmidt, Ruth; Nordestgaard, Børge G.; Tybjærg-Hansen, Anne; Sing, Charles F.
2009-01-01
This paper extends the Patient Rule-Induction Method (PRIM) for modeling cumulative incidence of disease developed by Dyson et al. (2007) to include the simultaneous consideration of non-additive combinations of predictor variables, a significance test of each combination, an adjustment for multiple testing and a confidence interval for the estimate of the cumulative incidence of disease in each partition. We employ the partitioning algorithm component of the Combinatorial Partitioning Method (CPM) to construct combinations of predictors, permutation testing to assess the significance of each combination, theoretical arguments for incorporating a multiple testing adjustment and bootstrap resampling to produce the confidence intervals. An illustration of this revised PRIM utilizing a sample of 2258 European male participants from the Copenhagen City Heart Study is presented that assesses the utility of genetic variants in predicting the presence of ischemic heart disease beyond the established risk factors. PMID:19025787
Psychophysical Laws and the Superorganism.
Reina, Andreagiovanni; Bose, Thomas; Trianni, Vito; Marshall, James A R
2018-03-12
Through theoretical analysis, we show how a superorganism may react to stimulus variations according to psychophysical laws observed in humans and other animals. We investigate an empirically-motivated honeybee house-hunting model, which describes a value-sensitive decision process over potential nest-sites, at the level of the colony. In this study, we show how colony decision time increases with the number of available nests, in agreement with the Hick-Hyman law of psychophysics, and decreases with mean nest quality, in agreement with Piéron's law. We also show that colony error rate depends on mean nest quality, and difference in quality, in agreement with Weber's law. Psychophysical laws, particularly Weber's law, have been found in diverse species, including unicellular organisms. Our theoretical results predict that superorganisms may also exhibit such behaviour, suggesting that these laws arise from fundamental mechanisms of information processing and decision-making. Finally, we propose a combined psychophysical law which unifies Hick-Hyman's law and Piéron's law, traditionally studied independently; this unified law makes predictions that can be empirically tested.
Theoretical Analysis of Rain Attenuation Probability
NASA Astrophysics Data System (ADS)
Roy, Surendra Kr.; Jha, Santosh Kr.; Jha, Lallan
2007-07-01
Satellite communication technologies are now highly developed and high quality, distance-independent services have expanded over a very wide area. As for the system design of the Hokkaido integrated telecommunications(HIT) network, it must first overcome outages of satellite links due to rain attenuation in ka frequency bands. In this paper theoretical analysis of rain attenuation probability on a slant path has been made. The formula proposed is based Weibull distribution and incorporates recent ITU-R recommendations concerning the necessary rain rates and rain heights inputs. The error behaviour of the model was tested with the loading rain attenuation prediction model recommended by ITU-R for large number of experiments at different probability levels. The novel slant path rain attenuastion prediction model compared to the ITU-R one exhibits a similar behaviour at low time percentages and a better root-mean-square error performance for probability levels above 0.02%. The set of presented models exhibits the advantage of implementation with little complexity and is considered useful for educational and back of the envelope computations.
Gironés, Xavier; Carbó-Dorca, Ramon; Ponec, Robert
2003-01-01
A new approach allowing the theoretical modeling of the electronic substituent effect is proposed. The approach is based on the use of fragment Quantum Self-Similarity Measures (MQS-SM) calculated from domain averaged Fermi Holes as new theoretical descriptors allowing for the replacement of Hammett sigma constants in QSAR models. To demonstrate the applicability of this new approach its formalism was applied to the description of the substituent effect on the dissociation of a broad series of meta and para substituted benzoic acids. The accuracy and the predicting power of this new approach was tested on the comparison with a recent exhaustive study by Sullivan et al. It has been shown that the accuracy and the predicting power of both procedures is comparable, but, in contrast to a five-parameter correlation equation necessary to describe the data in the study, our approach is more simple and, in fact, only a simple one-parameter correlation equation is required.
Simulations of the formation, evolution and clustering of galaxies and quasars.
Springel, Volker; White, Simon D M; Jenkins, Adrian; Frenk, Carlos S; Yoshida, Naoki; Gao, Liang; Navarro, Julio; Thacker, Robert; Croton, Darren; Helly, John; Peacock, John A; Cole, Shaun; Thomas, Peter; Couchman, Hugh; Evrard, August; Colberg, Jörg; Pearce, Frazer
2005-06-02
The cold dark matter model has become the leading theoretical picture for the formation of structure in the Universe. This model, together with the theory of cosmic inflation, makes a clear prediction for the initial conditions for structure formation and predicts that structures grow hierarchically through gravitational instability. Testing this model requires that the precise measurements delivered by galaxy surveys can be compared to robust and equally precise theoretical calculations. Here we present a simulation of the growth of dark matter structure using 2,160(3) particles, following them from redshift z = 127 to the present in a cube-shaped region 2.230 billion lightyears on a side. In postprocessing, we also follow the formation and evolution of the galaxies and quasars. We show that baryon-induced features in the initial conditions of the Universe are reflected in distorted form in the low-redshift galaxy distribution, an effect that can be used to constrain the nature of dark energy with future generations of observational surveys of galaxies.
Solution of magnetic field and eddy current problem induced by rotating magnetic poles (abstract)
NASA Astrophysics Data System (ADS)
Liu, Z. J.; Low, T. S.
1996-04-01
The magnetic field and eddy current problems induced by rotating permanent magnet poles occur in electromagnetic dampers, magnetic couplings, and many other devices. Whereas numerical techniques, for example, finite element methods can be exploited to study various features of these problems, such as heat generation and drag torque development, etc., the analytical solution is always of interest to the designers since it helps them to gain the insight into the interdependence of the parameters involved and provides an efficient tool for designing. Some of the previous work showed that the solution of the eddy current problem due to the linearly moving magnet poles can give satisfactory approximation for the eddy current problem due to rotating fields. However, in many practical cases, especially when the number of magnet poles is small, there is significant effect of flux focusing due to the geometry. The above approximation can therefore lead to marked errors in the theoretical predictions of the device performance. Bernot et al. recently described an analytical solution in a polar coordinate system where the radial field is excited by a time-varying source. A discussion of an analytical solution of the magnetic field and eddy current problems induced by moving magnet poles in radial field machines will be given in this article. The theoretical predictions obtained from this method is compared with the results obtained from finite element calculations. The validity of the method is also checked by the comparison of the theoretical predictions and the measurements from a test machine. It is shown that the introduced solution leads to a significant improvement in the air gap field prediction as compared with the results obtained from the analytical solution that models the eddy current problems induced by linearly moving magnet poles.
Testing Fundamental Physics with Distant Star Clusters: Analysis of Observational Data on Palomar 14
NASA Astrophysics Data System (ADS)
Jordi, K.; Grebel, E. K.; Hilker, M.; Baumgardt, H.; Frank, M.; Kroupa, P.; Haghi, H.; Côté, P.; Djorgovski, S. G.
2009-06-01
We use the distant outer halo globular cluster Palomar 14 as a test case for classical versus modified Newtonian dynamics (MOND). Previous theoretical calculations have shown that the line-of-sight velocity dispersion predicted by these theories can differ by up to a factor of 3 for such sparse, remote clusters like Pal 14. We determine the line-of-sight velocity dispersion of Palomar 14 by measuring radial velocities of 17 red giant cluster members obtained using the Very Large Telescope and Keck telescope. The systemic velocity of Palomar 14 is (72.28 ± 0.12) km s-1. The derived velocity dispersion of (0.38 ± 0.12) km s-1 of the 16 definite member stars is in agreement with the theoretical prediction for the classical Newtonian case according to Baumgardt et al. In order to exclude the possibility that a peculiar mass function might have influenced our measurements, we derived the cluster's main-sequence mass function down to 0.53 M sun using archival images obtained with the Hubble Space Telescope. We found a mass function slope of α = 1.27 ± 0.44, which is, compared to the canonical mass function, a significantly shallower slope. The derived lower limit on the cluster's mass is higher than the theoretically predicted mass in the case of MOND. Our data are consistent with a central density of ρ0 = 0.1 M sun pc-3. We need no dark matter in Palomar 14. If the cluster is on a circular orbit, our spectroscopic and photometric results argue against MOND, unless the cluster experienced significant mass loss. Some of the data presented herein were obtained at the W. M. Keck Observatory, which is operated as a scientific partnership among the California Institute of Technology, the University of California and the National Aeronautics and Space Administration. The Observatory was made possible by the generous financial support of the W. M. Keck Foundation.
Environmental solid particle effects on compressor cascade performance
NASA Technical Reports Server (NTRS)
Tabakoff, W.; Balan, C.
1982-01-01
The effect of suspended solid particles on the performance of the compressor cascade was investigated experimentally in a specially built cascade tunnel, using quartz sand particles. The cascades were made of NACA 65(10)10 airfoils. Three cascades were tested, one accelerating cascade and two diffusing cascades. The theoretical analysis assumes inviscid and incompressible two dimensional flow. The momentum exchange between the fluid and the particle is accounted for by the interphase force terms in the fluid momentum equation. The modified fluid phase momentum equations and the continuity equation are reduced to the conventional stream function vorticity formulation. The method treats the fluid phase in the Eulerian system and the particle phase in Lagrangian system. The experimental results indicate a small increase in the blade surface static pressures, while the theoretical results indicate a small decrease. The theoretical analysis, also predicts the loss in total pressure associated with the particulate flow through the cascade.
Konik, Robert M.; Sfeir, Matthew Y.; Misewich, James A.
2015-02-17
We demonstrate that a non-perturbative framework for the treatment of the excitations of single walled carbon nanotubes based upon a field theoretic reduction is able to accurately describe experiment observations of the absolute values of excitonic energies. This theoretical framework yields a simple scaling function from which the excitonic energies can be read off. This scaling function is primarily determined by a single parameter, the charge Luttinger parameter of the tube, which is in turn a function of the tube chirality, dielectric environment, and the tube's dimensions, thus expressing disparate influences on the excitonic energies in a unified fashion. Asmore » a result, we test this theory explicitly on the data reported in [NanoLetters 5, 2314 (2005)] and [Phys. Rev. B 82, 195424 (2010)] and so demonstrate the method works over a wide range of reported excitonic spectra.« less
Investigation of the structural behavior of the blades of a darrieus wind turbine†
NASA Astrophysics Data System (ADS)
Rosen, A.; Abramovich, H.
1985-06-01
A theoretical model in which account is taken of the non-linear, non-planar structural behavior of the curved blades of a Darrieus wind turbine is described. This model is simpler and needs less computational effort than some other models, but is still accurate enough for most engineering purposes. By using the present method, it is possible to treat any blade geometry, any structural, mass and aerodynamic blade properties distribution and any combination of boundary conditions. The model is used in order to calculate the blade behavior under the influence of concentrated loads, gravity loads and centrifugal loads. In order to verify the theoretical model, predictions are compared with experimental results which are obtained from tests with small models of curved blades. Usually the agreement between the theoretical and experimental results is very good. The influence of different parameters on blade behavior is presented and discussed.
Basic and applied research related to the technology of space energy conversion systems
NASA Technical Reports Server (NTRS)
Hertzberg, A.; Mattick, A. T.; Bruckner, A. P.
1988-01-01
The first six months' research effort on the Liquid Droplet Radiator (LDR) focussed on experimental and theoretical studies of radiation by an LDR droplet cloud. Improvements in the diagnostics for the radiation facility have been made which have permitted an accurate experimental test of theoretical predictions of LDR radiation over a wide range of optical depths, using a cloud of Dow silicone oil droplets. In conjunction with these measurements an analysis was made of the evolution of the cylindrical droplet cloud generated by a 2300-hole orifice plate. This analysis indicates that a considerable degree of agglomeration of droplets occurs over the first meter of travel. Theoretical studies have centered on developments of an efficient means of computing the angular scattering distribution from droplets in an LDR droplet cloud, so that a parameter study can be carried out for LDR radiative performance vs fluid optical properties and cloud geometry.
Experimental and Theoretical Study of Heat Conduction for Air up to 5000 K
NASA Technical Reports Server (NTRS)
Peng, Tzy-Cheng; Ahtye, Warren F.
1961-01-01
The theoretical value of the integral of thermal conductivity is compared with the experimental values from shock-tube measurements. The particular case considered is the one-dimensional nonsteady flow of heat through air at constant pressure. This approach has been previously described in NASA TR R-27. experiment was uncertain because of the large scatter in the experimental data. In this paper, an attempt is made to improve the correlation by use of a more refined calculation of the integral of thermal conductivity, and by use of improved experimental techniques and instrumentation. As a result of these changes, a much closer correlation is shown between the experimental and theoretical heat-flux potentials. This indicates that the predicted values of the coefficient of thermal conductivity for high-temperature air may be suitably accurate for many engineering needs, up to the limits of the test (4600 K).
Blue Stragglers and Other Stars of Mass Consumption in Globular Clusters
NASA Astrophysics Data System (ADS)
Panurach, Teresa; Leigh, Nathan
2018-01-01
Simulations of globular clusters suggest that collisions between main-sequence (MS) stars happen frequently. Stellar evolution models show that these collision products can be photometrically identified, appearing off the MS locus. These collision products can appear brighter and bluer than the MS turnoff, called “blue stragglers,” or even less massive and redder than the MS. We use proper motion-cleaned photometry from the Hubble Space Telescope of 38 globular clusters to identify candidate collision products. We compare the spectral energy distributions of our candidates to theoretical templates for single and multiple star systems, to constrain the possible presence of a binary companion and test consistency with theoretical stellar evolution models for collision products. For the BSs, we also compare the observed velocities from the proper motion catalog along with mass estimates derived from isochrone-fitting to theoretical predictions for both the collision and binary mass transfer models and find better agreement with the former.
Effect of chromosome tethering on nuclear organization in yeast.
Avşaroğlu, Barış; Bronk, Gabriel; Gordon-Messer, Susannah; Ham, Jungoh; Bressan, Debra A; Haber, James E; Kondev, Jane
2014-01-01
Interphase chromosomes in Saccharomyces cerevisiae are tethered to the nuclear envelope at their telomeres and to the spindle pole body (SPB) at their centromeres. Using a polymer model of yeast chromosomes that includes these interactions, we show theoretically that telomere attachment to the nuclear envelope is a major determinant of gene positioning within the nucleus only for genes within 10 kb of the telomeres. We test this prediction by measuring the distance between the SPB and the silent mating locus (HML) on chromosome III in wild-type and mutant yeast strains that contain altered chromosome-tethering interactions. In wild-type yeast cells we find that disruption of the telomere tether does not dramatically change the position of HML with respect to the SPB, in agreement with theoretical predictions. Alternatively, using a mutant strain with a synthetic tether that localizes an HML-proximal site to the nuclear envelope, we find a significant change in the SPB-HML distance, again as predicted by theory. Our study quantifies the importance of tethering at telomeres on the organization of interphase chromosomes in yeast, which has been shown to play a significant role in determining chromosome function such as gene expression and recombination.
Dynamic Smagorinsky model on anisotropic grids
NASA Technical Reports Server (NTRS)
Scotti, A.; Meneveau, C.; Fatica, M.
1996-01-01
Large Eddy Simulation (LES) of complex-geometry flows often involves highly anisotropic meshes. To examine the performance of the dynamic Smagorinsky model in a controlled fashion on such grids, simulations of forced isotropic turbulence are performed using highly anisotropic discretizations. The resulting model coefficients are compared with a theoretical prediction (Scotti et al., 1993). Two extreme cases are considered: pancake-like grids, for which two directions are poorly resolved compared to the third, and pencil-like grids, where one direction is poorly resolved when compared to the other two. For pancake-like grids the dynamic model yields the results expected from the theory (increasing coefficient with increasing aspect ratio), whereas for pencil-like grids the dynamic model does not agree with the theoretical prediction (with detrimental effects only on smallest resolved scales). A possible explanation of the departure is attempted, and it is shown that the problem may be circumvented by using an isotropic test-filter at larger scales. Overall, all models considered give good large-scale results, confirming the general robustness of the dynamic and eddy-viscosity models. But in all cases, the predictions were poor for scales smaller than that of the worst resolved direction.
Effect of Chromosome Tethering on Nuclear Organization in Yeast
Avşaroğlu, Barış; Bronk, Gabriel; Gordon-Messer, Susannah; Ham, Jungoh; Bressan, Debra A.; Haber, James E.; Kondev, Jane
2014-01-01
Interphase chromosomes in Saccharomyces cerevisiae are tethered to the nuclear envelope at their telomeres and to the spindle pole body (SPB) at their centromeres. Using a polymer model of yeast chromosomes that includes these interactions, we show theoretically that telomere attachment to the nuclear envelope is a major determinant of gene positioning within the nucleus only for genes within 10 kb of the telomeres. We test this prediction by measuring the distance between the SPB and the silent mating locus (HML) on chromosome III in wild–type and mutant yeast strains that contain altered chromosome-tethering interactions. In wild-type yeast cells we find that disruption of the telomere tether does not dramatically change the position of HML with respect to the SPB, in agreement with theoretical predictions. Alternatively, using a mutant strain with a synthetic tether that localizes an HML-proximal site to the nuclear envelope, we find a significant change in the SPB-HML distance, again as predicted by theory. Our study quantifies the importance of tethering at telomeres on the organization of interphase chromosomes in yeast, which has been shown to play a significant role in determining chromosome function such as gene expression and recombination. PMID:25020108
Theoretical study of hull-rotor aerodynamic interference on semibuoyant vehicles
NASA Technical Reports Server (NTRS)
Spangler, S. B.; Smith, C. A.; Mendenhall, M. R.
1977-01-01
Theoretical methods are being developed to predict the mutual interference between rotor wakes and the hull for semibuoyant vehicles. The objective of the investigation is to predict the pressure distribution and overall loads on the hull in the presence of rotors whose locations, tilt angles, and disk loading are arbitrarily specified. The methods involve development of potential flow models for the hull alone in a nonuniform onset flow, a rotor wake which has the proper features to predict induced flow outside the wake, and a wake centerline specification technique which accounts for the reactions of the wake to a nonuniform crossflow. The flow models are used in sequence to solve for the mutual influence of the hull and rotor(s) on each other and the resulting loads. A flow separation model is included to estimate the influence of separation on hull loads at high sideslip angles. Only limited results have been obtained to date. These were obtained on a configuration which was tested in the Ames Research Center 7- by 10-Foot Low Speed Tunnel under Goodyear Aircraft Corporation sponsorship and indicate the nature of the interference pressure distribution on a configuration in hover.
Sound transmission through lightweight double-leaf partitions: theoretical modelling
NASA Astrophysics Data System (ADS)
Wang, J.; Lu, T. J.; Woodhouse, J.; Langley, R. S.; Evans, J.
2005-09-01
This paper presents theoretical modelling of the sound transmission loss through double-leaf lightweight partitions stiffened with periodically placed studs. First, by assuming that the effect of the studs can be replaced with elastic springs uniformly distributed between the sheathing panels, a simple smeared model is established. Second, periodic structure theory is used to develop a more accurate model taking account of the discrete placing of the studs. Both models treat incident sound waves in the horizontal plane only, for simplicity. The predictions of the two models are compared, to reveal the physical mechanisms determining sound transmission. The smeared model predicts relatively simple behaviour, in which the only conspicuous features are associated with coincidence effects with the two types of structural wave allowed by the partition model, and internal resonances of the air between the panels. In the periodic model, many more features are evident, associated with the structure of pass- and stop-bands for structural waves in the partition. The models are used to explain the effects of incidence angle and of the various system parameters. The predictions are compared with existing test data for steel plates with wooden stiffeners, and good agreement is obtained.
Onie, Sandersan; Most, Steven B
2017-08-01
Attentional biases to threatening stimuli have been implicated in various emotional disorders. Theoretical approaches often carry the implicit assumption that various attentional bias measures tap into the same underlying construct, but attention itself is not a unitary mechanism. Most attentional bias tasks-such as the dot probe (DP)-index spatial attention, neglecting other potential attention mechanisms. We compared the DP with emotion-induced blindness (EIB), which appears to be mechanistically distinct, and examined the degree to which these tasks predicted (a) negative affect, (b) persistent negative thought (i.e., worry, rumination), and (c) each other. The 2 tasks did not predict each other, and they uniquely accounted for negative affect in a regression analysis. The relationship between EIB and negative affect was mediated by persistent negative thought, whereas that between the DP and negative affect was not, suggesting that EIB may be more intimately linked than spatial attention with persistent negative thought. Experiment 2 revealed EIB to have a favorable test-retest reliability. Together, these findings underscore the importance of distinguishing between attentional bias mechanisms when constructing theoretical models of, and interventions that target, particular emotional disorders. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
McDavid, Lindley; McDonough, Meghan H; Smith, Alan L
2015-06-01
Fostering self-worth and hope are important goals of positive youth development (PYD) efforts, yet intervention design is complicated by contrasting theoretical hypotheses regarding the directional association between these constructs. Therefore, within a longitudinal design we tested: (1) that self-worth predicts changes in hope (self theory; Harter, 1999), and (2) that hope predicts changes in self-worth (hope theory; Snyder, 2002) over time. Youth (N = 321; Mage = 10.33 years) in a physical activity-based PYD program completed surveys 37-45 days prior to and on the second day and third-to-last day of the program. A latent variable panel model that included autoregressive and cross-lagged paths indicated that self-worth was a significant predictor of change in hope, but hope did not predict change in self-worth. Therefore, the directional association between self-worth and hope is better explained by self-theory and PYD programs should aim to enhance perceptions of self-worth to build perceptions of hope. Copyright © 2015 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.
Metabolic pathway analysis and kinetic studies for production of nattokinase in Bacillus subtilis.
Unrean, Pornkamol; Nguyen, Nhung H A
2013-01-01
We have constructed a reaction network model of Bacillus subtilis. The model was analyzed using a pathway analysis tool called elementary mode analysis (EMA). The analysis tool was used to study the network capabilities and the possible effects of altered culturing conditions on the production of a fibrinolytic enzyme, nattokinase (NK) by B. subtilis. Based on all existing metabolic pathways, the maximum theoretical yield for NK synthesis in B. subtilis under different substrates and oxygen availability was predicted and the optimal culturing condition for NK production was identified. To confirm model predictions, experiments were conducted by testing these culture conditions for their influence on NK activity. The optimal culturing conditions were then applied to batch fermentation, resulting in high NK activity. The EMA approach was also applied for engineering B. subtilis metabolism towards the most efficient pathway for NK synthesis by identifying target genes for deletion and overexpression that enable the cell to produce NK at the maximum theoretical yield. The consistency between experiments and model predictions proves the feasibility of EMA being used to rationally design culture conditions and genetic manipulations for the efficient production of desired products.
The evolution of sexes: A specific test of the disruptive selection theory.
da Silva, Jack
2018-01-01
The disruptive selection theory of the evolution of anisogamy posits that the evolution of a larger body or greater organismal complexity selects for a larger zygote, which in turn selects for larger gametes. This may provide the opportunity for one mating type to produce more numerous, small gametes, forcing the other mating type to produce fewer, large gametes. Predictions common to this and related theories have been partially upheld. Here, a prediction specific to the disruptive selection theory is derived from a previously published game-theoretic model that represents the most complete description of the theory. The prediction, that the ratio of macrogamete to microgamete size should be above three for anisogamous species, is supported for the volvocine algae. A fully population genetic implementation of the model, involving mutation, genetic drift, and selection, is used to verify the game-theoretic approach and accurately simulates the evolution of gamete sizes in anisogamous species. This model was extended to include a locus for gamete motility and shows that oogamy should evolve whenever there is costly motility. The classic twofold cost of sex may be derived from the fitness functions of these models, showing that this cost is ultimately due to genetic conflict.
Internal performance predictions for Langley scramjet engine module
NASA Technical Reports Server (NTRS)
Pinckney, S. Z.
1978-01-01
A one dimensional theoretical method for the prediction of the internal performance of a scramjet engine is presented. The effects of changes in vehicle forebody flow parameters and characteristics on predicted thrust for the scramjet engine were evaluated using this method, and results are presented. A theoretical evaluation of the effects of changes in the scramjet engine's internal parameters is also presented. Theoretical internal performance predictions, in terms thrust coefficient and specific impulse, are provided for the scramjet engine for free stream Mach numbers of 5, 6, and 7 free stream dynamic pressure of 23,940 N/sq m forebody surface angles of 4.6 deg to 14.6 deg, and fuel equivalence ratio of 1.0.
Modifications to the nozzle test chamber to extend nozzle static-test capability
NASA Technical Reports Server (NTRS)
Keyes, J. W.
1985-01-01
The nozzle test chamber was modified to provide a high-pressure-ratio nozzle static-test capability. Experiments were conducted to determine the range of the ratio of nozzle total pressure to chamber pressure and to make direct nozzle thrust measurements using a three-component strain-gage force balance. Pressure ratios from 3 to 285 were measured with several axisymmetric nozzles at a nozzle total pressure of 15 to 190 psia. Devices for measuring system mass flow were calibrated using standard axisymmetric convergent choked nozzles. System mass-flow rates up to 10 lbm/sec are measured. The measured thrust results of these nozzles are in good agreement with one-dimensional theoretical predictions for convergent nozzles.
Wave-induced hydraulic forces on submerged aquatic plants in shallow lakes.
Schutten, J; Dainty, J; Davy, A J
2004-03-01
Hydraulic pulling forces arising from wave action are likely to limit the presence of freshwater macrophytes in shallow lakes, particularly those with soft sediments. The aim of this study was to develop and test experimentally simple models, based on linear wave theory for deep water, to predict such forces on individual shoots. Models were derived theoretically from the action of the vertical component of the orbital velocity of the waves on shoot size. Alternative shoot-size descriptors (plan-form area or dry mass) and alternative distributions of the shoot material along its length (cylinder or inverted cone) were examined. Models were tested experimentally in a flume that generated sinusoidal waves which lasted 1 s and were up to 0.2 m high. Hydraulic pulling forces were measured on plastic replicas of Elodea sp. and on six species of real plants with varying morphology (Ceratophyllum demersum, Chara intermedia, Elodea canadensis, Myriophyllum spicatum, Potamogeton natans and Potamogeton obtusifolius). Measurements on the plastic replicas confirmed predicted relationships between force and wave phase, wave height and plant submergence depth. Predicted and measured forces were linearly related over all combinations of wave height and submergence depth. Measured forces on real plants were linearly related to theoretically derived predictors of the hydraulic forces (integrals of the products of the vertical orbital velocity raised to the power 1.5 and shoot size). The general applicability of the simplified wave equations used was confirmed. Overall, dry mass and plan-form area performed similarly well as shoot-size descriptors, as did the conical or cylindrical models of shoot distribution. The utility of the modelling approach in predicting hydraulic pulling forces from relatively simple plant and environmental measurements was validated over a wide range of forces, plant sizes and species.
Some limitations in applying classical EHD film-thickness formulae to a high-speed bearing
NASA Technical Reports Server (NTRS)
Coy, J. J.; Zaretsky, E. V.
1980-01-01
Elastohydrodynamic film thickness was measured for a 20 mm ball bearing using the capacitance technique. The bearing was thrust loaded to 90, 448, and 778 N. The corresponding maximum stresses on the inner race were 1.28, 2.09, and 2.45 GPa. Test speeds ranged from 400 to 14,000 rpm. Film thickness measurements were taken with four different lubricants: (1) synthetic paraffinic; (2) synthetic paraffinic with additives; (3) neopentylpolyol (tetra) ester; and (4) synthetic cycloaliphatic hydrocarbon traction fluid. The test bearing was mist lubricated. Test temperatures were 300, 338, and 393 K. The measured results were compared to theoretical predictions and are presented.
Flaw growth behavior in thick welded plates of 2219-T87 aluminum at room and cryogenic temperatures
NASA Technical Reports Server (NTRS)
Forman, R. G.; Glorioso, S. V.; Medlock, J. D.
1973-01-01
Axial load fatigue and fracture tests were conducted on thick welded plates of 2219-T87 aluminum alloy to determine the tensile strength properties and the flaw growth behavior in electron beam, gas metal arc, and pulse current gas tungsten arc welds for plates 6.35 centimeters (2.5 in.) thick. The tests were conducted in room temperature air and in liquid nitrogen environments. Specimens were tested in both the as-welded and the aged after welding conditions. The experimental crack growth rate were correlated with theoretical crack growth rate predictions for semielliptical surface flaws.
Yun, Ilhong; Kim, Seung-Gon; Kwon, Sangro
2016-08-01
Theoretical propositions and empirical tests of Gottfredson and Hirschi's general theory continue to permeate the criminological literature. Nevertheless, the vast majority of studies have been conducted in North America and some European countries. Only a handful of empirical works have been conducted in East Asia. To further test the generality assertion of Gottfredson and Hirschi, the current study examines low self-control's efficacy in predicting the involvement of South Korean adolescents in typical delinquency, drinking, smoking, Internet addiction, and smartphone addiction. The presented findings largely support the generality hypothesis, although the theorists' assertion seems to be somewhat overstated. © The Author(s) 2015.
Hyland, Philip; Shevlin, Mark; Adamson, Gary; Boduszek, Daniel
2014-01-01
This study directly tests a central prediction of rational emotive behaviour therapy (REBT) that has received little empirical attention regarding the core and intermediate beliefs in the development of posttraumatic stress symptoms. A theoretically consistent REBT model of posttraumatic stress disorder (PTSD) was examined using structural equation modelling techniques among a sample of 313 trauma-exposed military and law enforcement personnel. The REBT model of PTSD provided a good fit of the data, χ(2) = 599.173, df = 356, p < .001; standardized root mean square residual = .05 (confidence interval = .04-.05); standardized root mean square residual = .04; comparative fit index = .95; Tucker Lewis index = .95. Results demonstrated that demandingness beliefs indirectly affected the various symptom groups of PTSD through a set of secondary irrational beliefs that include catastrophizing, low frustration tolerance, and depreciation beliefs. Results were consistent with the predictions of REBT theory and provides strong empirical support that the cognitive variables described by REBT theory are critical cognitive constructs in the prediction of PTSD symptomology. © 2013 Wiley Periodicals, Inc.
Froehlich, Laura; Martiny, Sarah E; Deaux, Kay; Goetz, Thomas; Mok, Sog Yee
2016-09-01
This research explores implicit theory of intelligence (TOI) as a moderator of stereotype activation effects on test performance for members of negatively stereotyped and of favourably stereotyped groups. In Germany, Turkish-origin migrants are stereotyped as low in verbal ability. We predicted that on a test diagnostic of verbal intelligence, endorsement of an entity TOI predicts stereotype threat effects for Turkish-origin students and stereotype lift effects for German students. This effect could account for some of the performance gap between immigrants and host society members after stereotype activation. Study 1 (N = 107) established structural equivalence of implicit theories across the ethnic groups. In two experimental studies (Study 2: N = 182, Study 3: N = 190), we tested the moderating effect of TOI in a 2 (stereotype activation: diagnostic vs. non-diagnostic test) × 2 (ethnicity: German vs. Turkish migration background) experimental design. The results showed that when the test was described as diagnostic of verbal intelligence, higher entity theory endorsement predicted stereotype threat effects for Turkish-origin students (Study 2 and Study 3) and stereotype lift effects for German students (Study 3). The results are discussed in terms of practical implications for educational settings and theoretical implications for processes underlying stereotype activation effects. © 2016 The British Psychological Society.
2009-01-01
theoretical framework developed by Edward L. Thorndike and his contemporaries (1935), proposed that (a) learning occurs in both formal and informal settings...implies, and general learning theory ( Thorndike , 1935) suggests, that more motivated employees should acquire more knowledge, so there should be a...that is predicted by tacit knowledge and general learning theory (Sternberg & Wagner, 1993; Thorndike , 1935). Table 3 reports modest true-score
ERIC Educational Resources Information Center
Karniol, Rachel
2009-01-01
To test divergent theoretical predictions as to the impact of having a younger or older, same-sex sibling or opposite-sex sibling on other gender constancy, Israeli kindergarten children in two-child families responded to a gender constancy task in which a male and female picture target engaged in counter-stereotypic toy play and adopted…
Aeroelastic stability analysis of a Darrieus wind turbine
NASA Astrophysics Data System (ADS)
Popelka, D.
1982-02-01
An aeroelastic stability analysis was developed for predicting flutter instabilities on vertical axis wind turbines. The analytical model and mathematical formulation of the problem are described as well as the physical mechanism that creates flutter in Darrieus turbines. Theoretical results are compared with measured experimental data from flutter tests of the Sandia 2 Meter turbine. Based on this comparison, the analysis appears to be an adequate design evaluation tool.
NASA Technical Reports Server (NTRS)
Porter, R. L.; Ferland, G. J.; Kraemer, S. B.; Armentrout, B. K.; Arnaud, K. A.; Turner, T. J.
2007-01-01
We discuss new functionality of the spectral simulation code CLOUDY which allows the user to calculate grids with one or more initial parameters varied and formats the predicted spectra in the standard FITS format. These files can then be imported into the x-ray spectral analysis software XSPEC and used as theoretical models for observations. We present and verify a test case. Finally, we consider a few observations and discuss our results.
ERIC Educational Resources Information Center
Abramitzky, Ran; Lavy, Victor
2011-01-01
This paper uses a novel dataset to test the important theoretical prediction that the level of investment in schooling is increasing in the rate of return to education. We exploit a unique episode where different Israeli kibbutzim shifted from equal sharing to productivity-based wages in different years, resulting in sharp increases in the return…
Developmental Pathways of Youth Gang Membership: A Structural Test of the Social Development Model
Hill, Karl G.; Gilman, Amanda B.; Howell, James C.; Catalano, Richard F.; Hawkins, J. David
2017-01-01
As a result of nearly 40 years of research using a risk and protective factor approach, much is known about the predictors of gang onset. Little theoretical work, however, has been done to situate this approach to studying gang membership within a more comprehensive developmental model. Using structural equation modeling techniques, the current study is the first to test the capacity of the social development model (SDM) to predict the developmental pathways that increase and decrease the likelihood of gang membership. Results suggest that the SDM provides a good accounting of the social developmental processes at age 13 that are predictive of later gang membership. These findings support the promotion of a theoretical understanding of gang membership that specifies both pro- and antisocial developmental pathways. Additionally, as the SDM is intended as a model that can guide preventive intervention, results also hold practical utility for designing strategies that can be implemented in early adolescence to address the likelihood of later gang involvement. Three key preventive intervention points to address gang membership are discussed, including promoting efforts to enhance social skills, increasing the availability of prosocial opportunities and rewarding engagement in these opportunities, and reducing antisocial socialization experiences throughout the middle- and high school years. PMID:29403146
Carter, Nathan T; Dalal, Dev K; Boyce, Anthony S; O'Connell, Matthew S; Kung, Mei-Chuan; Delgado, Kristin M
2014-07-01
The personality trait of conscientiousness has seen considerable attention from applied psychologists due to its efficacy for predicting job performance across performance dimensions and occupations. However, recent theoretical and empirical developments have questioned the assumption that more conscientiousness always results in better job performance, suggesting a curvilinear link between the 2. Despite these developments, the results of studies directly testing the idea have been mixed. Here, we propose this link has been obscured by another pervasive assumption known as the dominance model of measurement: that higher scores on traditional personality measures always indicate higher levels of conscientiousness. Recent research suggests dominance models show inferior fit to personality test scores as compared to ideal point models that allow for curvilinear relationships between traits and scores. Using data from 2 different samples of job incumbents, we show the rank-order changes that result from using an ideal point model expose a curvilinear link between conscientiousness and job performance 100% of the time, whereas results using dominance models show mixed results, similar to the current state of the literature. Finally, with an independent cross-validation sample, we show that selection based on predicted performance using ideal point scores results in more favorable objective hiring outcomes. Implications for practice and future research are discussed.
Guided ultrasonic wave beam skew in silicon wafers
NASA Astrophysics Data System (ADS)
Pizzolato, Marco; Masserey, Bernard; Robyr, Jean-Luc; Fromme, Paul
2018-04-01
In the photovoltaic industry, monocrystalline silicon wafers are employed for solar cells with high conversion efficiency. Micro-cracks induced by the cutting process in the thin wafers can lead to brittle wafer fracture. Guided ultrasonic waves would offer an efficient methodology for the in-process non-destructive testing of wafers to assess micro-crack density. The material anisotropy of the monocrystalline silicon leads to variations of the guided wave characteristics, depending on the propagation direction relative to the crystal orientation. Selective guided ultrasonic wave excitation was achieved using a contact piezoelectric transducer with custom-made wedges for the A0 and S0 Lamb wave modes and a transducer holder to achieve controlled contact pressure and orientation. The out-of-plane component of the guided wave propagation was measured using a non-contact laser interferometer. The phase slowness (velocity) of the two fundamental Lamb wave modes was measured experimentally for varying propagation directions relative to the crystal orientation and found to match theoretical predictions. Significant wave beam skew was observed experimentally, especially for the S0 mode, and investigated from 3D finite element simulations. Good agreement was found with the theoretical predictions based on nominal material properties of the silicon wafer. The important contribution of guided wave beam skewing effects for the non-destructive testing of silicon wafers was demonstrated.
Phan, Huy P
2008-03-01
Although extensive research has examined epistemological beliefs, reflective thinking and learning approaches, very few studies have looked at these three theoretical frameworks in their totality. This research tested two separate structural models of epistemological beliefs, learning approaches, reflective thinking and academic performance among tertiary students over a period of 12 months. Participants were first-year Arts (N=616; 271 females, 345 males) and second-year Mathematics (N=581; 241 females, 341 males) university students. Students' epistemological beliefs were measured with the Schommer epistemological questionnaire (EQ, Schommer, 1990). Reflective thinking was measured with the reflective thinking questionnaire (RTQ, Kember et al., 2000). Student learning approaches were measured with the revised study process questionnaire (R-SPQ-2F, Biggs, Kember, & Leung, 2001). LISREL 8 was used to test two structural equation models - the cross-lag model and the causal-mediating model. In the cross-lag model involving Arts students, structural equation modelling showed that epistemological beliefs influenced student learning approaches rather than the contrary. In the causal-mediating model involving Mathematics students, the results indicate that both epistemological beliefs and learning approaches predicted reflective thinking and academic performance. Furthermore, learning approaches mediated the effect of epistemological beliefs on reflective thinking and academic performance. Results of this study are significant as they integrated the three theoretical frameworks within the one study.
The SEURAT-1 approach towards animal free human safety assessment.
Gocht, Tilman; Berggren, Elisabet; Ahr, Hans Jürgen; Cotgreave, Ian; Cronin, Mark T D; Daston, George; Hardy, Barry; Heinzle, Elmar; Hescheler, Jürgen; Knight, Derek J; Mahony, Catherine; Peschanski, Marc; Schwarz, Michael; Thomas, Russell S; Verfaillie, Catherine; White, Andrew; Whelan, Maurice
2015-01-01
SEURAT-1 is a European public-private research consortium that is working towards animal-free testing of chemical compounds and the highest level of consumer protection. A research strategy was formulated based on the guiding principle to adopt a toxicological mode-of-action framework to describe how any substance may adversely affect human health.The proof of the initiative will be in demonstrating the applicability of the concepts on which SEURAT-1 is built on three levels:(i) Theoretical prototypes for adverse outcome pathways are formulated based on knowledge already available in the scientific literature on investigating the toxicological mode-of-actions leading to adverse outcomes (addressing mainly liver toxicity);(ii)adverse outcome pathway descriptions are used as a guide for the formulation of case studies to further elucidate the theoretical model and to develop integrated testing strategies for the prediction of certain toxicological effects (i.e., those related to the adverse outcome pathway descriptions);(iii) further case studies target the application of knowledge gained within SEURAT-1 in the context of safety assessment. The ultimate goal would be to perform ab initio predictions based on a complete understanding of toxicological mechanisms. In the near-term, it is more realistic that data from innovative testing methods will support read-across arguments. Both scenarios are addressed with case studies for improved safety assessment. A conceptual framework for a rational integrated assessment strategy emerged from designing the case studies and is discussed in the context of international developments focusing on alternative approaches for evaluating chemicals using the new 21st century tools for toxicity testing.
Older and younger adults differently judge the similarity between negative affect terms.
Ready, Rebecca E; Santorelli, Gennarina D; Mather, Molly A
2018-01-02
Theoretical models of aging suggest changes across the adult lifespan in the capacity to differentiate emotions. Greater emotion differentiation is associated with advantages in terms of emotion regulation and emotion resiliency. This study utilized a novel method that directly measures judgments of affect differentiation and does not confound affective experience with knowledge about affect terms. Theoretical predictions that older adults would distinguish more between affect terms than younger persons were tested. Older (n = 27; aged 60-92) and younger (n = 56; aged 18-32) adults rated the difference versus similarity of 16 affect terms from the Kessler and Staudinger ( 2009 ) scales; each of the 16 items was paired with every other item for a total of 120 ratings. Participants provided self-reports of trait emotions, alexithymia, and depressive symptoms. Older adults significantly differentiated more between low arousal and high arousal negative affect (NA) items than younger persons. Depressive symptoms were associated with similarity ratings across and within valence and arousal. Findings offer partial support for theoretical predictions that older adults differentiate more between affect terms than younger persons. To the extent that differentiating between negative affects can aid in emotion regulation, older adults may have an advantage over younger persons. Future research should investigate mechanisms that underlie age group differences in emotion differentiation.
Optimal allocation of leaf epidermal area for gas exchange.
de Boer, Hugo J; Price, Charles A; Wagner-Cremer, Friederike; Dekker, Stefan C; Franks, Peter J; Veneklaas, Erik J
2016-06-01
A long-standing research focus in phytology has been to understand how plants allocate leaf epidermal space to stomata in order to achieve an economic balance between the plant's carbon needs and water use. Here, we present a quantitative theoretical framework to predict allometric relationships between morphological stomatal traits in relation to leaf gas exchange and the required allocation of epidermal area to stomata. Our theoretical framework was derived from first principles of diffusion and geometry based on the hypothesis that selection for higher anatomical maximum stomatal conductance (gsmax ) involves a trade-off to minimize the fraction of the epidermis that is allocated to stomata. Predicted allometric relationships between stomatal traits were tested with a comprehensive compilation of published and unpublished data on 1057 species from all major clades. In support of our theoretical framework, stomatal traits of this phylogenetically diverse sample reflect spatially optimal allometry that minimizes investment in the allocation of epidermal area when plants evolve towards higher gsmax . Our results specifically highlight that the stomatal morphology of angiosperms evolved along spatially optimal allometric relationships. We propose that the resulting wide range of viable stomatal trait combinations equips angiosperms with developmental and evolutionary flexibility in leaf gas exchange unrivalled by gymnosperms and pteridophytes. © 2016 The Authors New Phytologist © 2016 New Phytologist Trust.
Predictive validity of five cognitive skills tests among women receiving engineering training
NASA Astrophysics Data System (ADS)
Wittig, Michele Andrisin; Hennix Sasse, Sharon; Giacomi, Jean
This article addresses two sets of theoretical and practical issues related to increasing the percentage of women engineers. First, the measurement of women's aptitude for and changes in skills during engineering training was assessed. Five cognitive skills tests were administered in a one-group pretest-posttest design to 24 baccalaureate women enrolled in an eleven-month engineering training course. Significant increases in skills were shown on three of the five assessments. Scores on a mathematics anxiety scale and a measure of conservation of horizontality are also reported. Second, the relationship of academic and demographic information and cognitive skills to degree of success in the program is reported. Pretraining spatial visualization scores predicted posttraining GPA group membership. The results are compared and contrasted with those of studies of male undergraduates. Implications are drawn concerning the ways in which evaluations of such programs can contribute to our understanding of the changes in skills that occur with training in engineering and of the factors that predict success in such programs.
Perturbation-Induced False Starts as a Test of the Jirsa–Kelso Excitator Model
Fink, Philip W.; Kelso, J. A. Scott; Jirsa, Viktor K.
2009-01-01
One difference between the excitator model and other theoretical models of coordination is the mechanism of discrete movement initiation. In addition to an imperative signal common to all discrete movement initiation, the excitator model proposes that movements are initiated when a threshold element in state space, the so-called separatrix, is crossed as a consequence of stimulation or random fluctuations. The existence of a separatrix predicts that false starts will be caused by mechanical perturbations and that they depend on the perturbation's direction. The authors tested this prediction in a reaction-time task to an auditory stimulus. Participants applied perturbations in the direction of motion (i.e., index finger flexion) or opposed to the motion prior to the stimulus on 1/4 of the trials. The authors found false starts in 34% and 9% of trials following flexion perturbations and extension perturbations, respectively, as compared with only 2% of trials without perturbations, confirming a unique prediction of the excitator model. PMID:19201685
An integrated approach to rotorcraft human factors research
NASA Technical Reports Server (NTRS)
Hart, Sandra G.; Hartzell, E. James; Voorhees, James W.; Bucher, Nancy M.; Shively, R. Jay
1988-01-01
As the potential of civil and military helicopters has increased, more complex and demanding missions in increasingly hostile environments have been required. Users, designers, and manufacturers have an urgent need for information about human behavior and function to create systems that take advantage of human capabilities, without overloading them. Because there is a large gap between what is known about human behavior and the information needed to predict pilot workload and performance in the complex missions projected for pilots of advanced helicopters, Army and NASA scientists are actively engaged in Human Factors Research at Ames. The research ranges from laboratory experiments to computational modeling, simulation evaluation, and inflight testing. Information obtained in highly controlled but simpler environments generates predictions which can be tested in more realistic situations. These results are used, in turn, to refine theoretical models, provide the focus for subsequent research, and ensure operational relevance, while maintaining predictive advantages. The advantages and disadvantages of each type of research are described along with examples of experimental results.
Wilson, Mark; Smith, Nickolas C; Holmes, Paul S
2007-08-01
The aim of this study was to test the conflicting predictions of processing efficiency theory (PET) and the conscious processing hypothesis (CPH) regarding effort's role in influencing the effects of anxiety on a golf putting task. Mid-handicap golfers made a series of putts to target holes under two counterbalanced conditions designed to manipulate the level of anxiety experienced. The effort exerted on each putting task was assessed though self-report, psychophysiological (heart rate variability) and behavioural (pre-putt time and glances at the target) measures. Performance was assessed by putting error. Results were generally more supportive of the predictions of PET rather than the CPH as performance was maintained for some performers despite increased state anxiety and a reduction in processing efficiency. The findings of this study support previous research suggesting that both theories offer useful theoretical frameworks for examining the relationship between anxiety and performance in sport.
Stereotype threat can both enhance and impair older adults' memory.
Barber, Sarah J; Mather, Mara
2013-12-01
Negative stereotypes about aging can impair older adults' memory via stereotype threat; however, the mechanisms underlying this phenomenon are unclear. In two experiments, we tested competing predictions derived from two theoretical accounts of stereotype threat: executive-control interference and regulatory fit. Older adults completed a working memory test either under stereotype threat about age-related memory declines or not under such threat. Monetary incentives were manipulated such that recall led to gains or forgetting led to losses. The executive-control-interference account predicts that stereotype threat decreases the availability of executive-control resources and hence should impair working memory performance. The regulatory-fit account predicts that threat induces a prevention focus, which should impair performance when gains are emphasized but improve performance when losses are emphasized. Results were consistent only with the regulatory-fit account. Although stereotype threat significantly impaired older adults' working memory performance when remembering led to gains, it significantly improved performance when forgetting led to losses.
Armitage, David W
2017-11-01
Ecosystem development theory predicts that successional turnover in community composition can influence ecosystem functioning. However, tests of this theory in natural systems are made difficult by a lack of replicable and tractable model systems. Using the microbial digestive associates of a carnivorous pitcher plant, I tested hypotheses linking host age-driven microbial community development to host functioning. Monitoring the yearlong development of independent microbial digestive communities in two pitcher plant populations revealed a number of trends in community succession matching theoretical predictions. These included mid-successional peaks in bacterial diversity and metabolic substrate use, predictable and parallel successional trajectories among microbial communities, and convergence giving way to divergence in community composition and carbon substrate use. Bacterial composition, biomass, and diversity positively influenced the rate of prey decomposition, which was in turn positively associated with a host leaf's nitrogen uptake efficiency. Overall digestive performance was greatest during late summer. These results highlight links between community succession and ecosystem functioning and extend succession theory to host-associated microbial communities.
Simen, Patrick; Contreras, David; Buck, Cara; Hu, Peter; Holmes, Philip; Cohen, Jonathan D
2009-12-01
The drift-diffusion model (DDM) implements an optimal decision procedure for stationary, 2-alternative forced-choice tasks. The height of a decision threshold applied to accumulating information on each trial determines a speed-accuracy tradeoff (SAT) for the DDM, thereby accounting for a ubiquitous feature of human performance in speeded response tasks. However, little is known about how participants settle on particular tradeoffs. One possibility is that they select SATs that maximize a subjective rate of reward earned for performance. For the DDM, there exist unique, reward-rate-maximizing values for its threshold and starting point parameters in free-response tasks that reward correct responses (R. Bogacz, E. Brown, J. Moehlis, P. Holmes, & J. D. Cohen, 2006). These optimal values vary as a function of response-stimulus interval, prior stimulus probability, and relative reward magnitude for correct responses. We tested the resulting quantitative predictions regarding response time, accuracy, and response bias under these task manipulations and found that grouped data conformed well to the predictions of an optimally parameterized DDM.
Tan, Christine L; Hassali, Mohamed A; Saleem, Fahad; Shafie, Asrul A; Aljadhey, Hisham; Gan, Vincent B
2015-01-01
(i) To develop the Pharmacy Value-Added Services Questionnaire (PVASQ) using emerging themes generated from interviews. (ii) To establish reliability and validity of questionnaire instrument. Using an extended Theory of Planned Behavior as the theoretical model, face-to-face interviews generated salient beliefs of pharmacy value-added services. The PVASQ was constructed initially in English incorporating important themes and later translated into the Malay language with forward and backward translation. Intention (INT) to adopt pharmacy value-added services is predicted by attitudes (ATT), subjective norms (SN), perceived behavioral control (PBC), knowledge and expectations. Using a 7-point Likert-type scale and a dichotomous scale, test-retest reliability (N=25) was assessed by administrating the questionnaire instrument twice at an interval of one week apart. Internal consistency was measured by Cronbach's alpha and construct validity between two administrations was assessed using the kappa statistic and the intraclass correlation coefficient (ICC). Confirmatory Factor Analysis, CFA (N=410) was conducted to assess construct validity of the PVASQ. The kappa coefficients indicate a moderate to almost perfect strength of agreement between test and retest. The ICC for all scales tested for intra-rater (test-retest) reliability was good. The overall Cronbach' s alpha (N=25) is 0.912 and 0.908 for the two time points. The result of CFA (N=410) showed most items loaded strongly and correctly into corresponding factors. Only one item was eliminated. This study is the first to develop and establish the reliability and validity of the Pharmacy Value-Added Services Questionnaire instrument using the Theory of Planned Behavior as the theoretical model. The translated Malay language version of PVASQ is reliable and valid to predict Malaysian patients' intention to adopt pharmacy value-added services to collect partial medicine supply.
Magnetoelastic Effect-Based Transmissive Stress Detection for Steel Strips: Theory and Experiment
Zhang, Qingdong; Su, Yuanxiao; Zhang, Liyuan; Bi, Jia; Luo, Jiang
2016-01-01
For the deficiencies of traditional stress detection methods for steel strips in industrial production, this paper proposes a non-contact stress detection scheme based on the magnetoelastic effect. The theoretical model of the transmission-type stress detection is established, in which the output voltage and the tested stress obey a linear relation. Then, a stress detection device is built for the experiment, and Q235 steel under uniaxial tension is tested as an example. The result shows that the output voltage rises linearly with the increase of the tensile stress, consistent with the theoretical prediction. To ensure the accuracy of the stress detection method in actual application, the temperature compensation, magnetic shielding and some other key technologies are investigated to reduce the interference of the external factors, such as environment temperature and surrounding magnetic field. The present research develops the theoretical and experimental foundations for the magnetic stress detection system, which can be used for online non-contact monitoring of strip flatness-related stress (tension distribution or longitudinal residual stress) in the steel strip rolling process, the quality evaluation of strip flatness after rolling, the life and safety assessment of metal construction and other industrial production links. PMID:27589742
2014-01-01
We present four models of solution free-energy prediction for druglike molecules utilizing cheminformatics descriptors and theoretically calculated thermodynamic values. We make predictions of solution free energy using physics-based theory alone and using machine learning/quantitative structure–property relationship (QSPR) models. We also develop machine learning models where the theoretical energies and cheminformatics descriptors are used as combined input. These models are used to predict solvation free energy. While direct theoretical calculation does not give accurate results in this approach, machine learning is able to give predictions with a root mean squared error (RMSE) of ∼1.1 log S units in a 10-fold cross-validation for our Drug-Like-Solubility-100 (DLS-100) dataset of 100 druglike molecules. We find that a model built using energy terms from our theoretical methodology as descriptors is marginally less predictive than one built on Chemistry Development Kit (CDK) descriptors. Combining both sets of descriptors allows a further but very modest improvement in the predictions. However, in some cases, this is a statistically significant enhancement. These results suggest that there is little complementarity between the chemical information provided by these two sets of descriptors, despite their different sources and methods of calculation. Our machine learning models are also able to predict the well-known Solubility Challenge dataset with an RMSE value of 0.9–1.0 log S units. PMID:24564264
A quantitative dynamic systems model of health-related quality of life among older adults
Roppolo, Mattia; Kunnen, E Saskia; van Geert, Paul L; Mulasso, Anna; Rabaglietti, Emanuela
2015-01-01
Health-related quality of life (HRQOL) is a person-centered concept. The analysis of HRQOL is highly relevant in the aged population, which is generally suffering from health decline. Starting from a conceptual dynamic systems model that describes the development of HRQOL in individuals over time, this study aims to develop and test a quantitative dynamic systems model, in order to reveal the possible dynamic trends of HRQOL among older adults. The model is tested in different ways: first, with a calibration procedure to test whether the model produces theoretically plausible results, and second, with a preliminary validation procedure using empirical data of 194 older adults. This first validation tested the prediction that given a particular starting point (first empirical data point), the model will generate dynamic trajectories that lead to the observed endpoint (second empirical data point). The analyses reveal that the quantitative model produces theoretically plausible trajectories, thus providing support for the calibration procedure. Furthermore, the analyses of validation show a good fit between empirical and simulated data. In fact, no differences were found in the comparison between empirical and simulated final data for the same subgroup of participants, whereas the comparison between different subgroups of people resulted in significant differences. These data provide an initial basis of evidence for the dynamic nature of HRQOL during the aging process. Therefore, these data may give new theoretical and applied insights into the study of HRQOL and its development with time in the aging population. PMID:26604722
NASA Astrophysics Data System (ADS)
Halalay, Ion C.
A study of the structural glass transition trough impulsive stimulated light scattering experiments has been carried out in concentrated aqueous lithium chloride solutions, at temperatures ranging from ambient to cryogenic. A specially designed sample cell made it possible to cover the whole temperature interval from simple liquid, to viscoelastic supercooled liquid, to glass. It is shown that a phenomenological description of the results of these experiments in terms of a spectrum of relaxation times through the use of a Kohlrausch-Williams-Watts relaxation function is inadequate. Based on predictions of mode-coupling theory of the liquid-glass transition, an alternative approach to data interpretation is proposed. It is shown that for an aqueous lithium chloride solution, the prediction of simple scaling and identical scaling for mechanical and electrical susceptibilities seems to be valid. However, another prediction of theory is called into question: instead of a power-law behavior on temperature difference, it is found experimentally that the behavior of the susceptibility spectrum minimum is exponential. Similar disagreements are found for other two materials, triphenyl phosphite and polypropylene oxide. The causes for these discrepancies are discussed and it is concluded that additional experimentation is necessary to verify theoretical claims. Experiments are proposed which can test these predictions and serve as guide for the construction of theoretical models for the glass transition in real systems. (Copies available exclusively from MIT Libraries, Rm. 14-0551, Cambridge, MA 02139-4307. Ph. 617 -253-5668; Fax 617-253-1690.).
NASA Astrophysics Data System (ADS)
Sutherland, Herbert J.
1988-08-01
Sandia National Laboratories has erected a research oriented, 34- meter diameter, Darrieus vertical axis wind turbine near Bushland, Texas. This machine, designated the Sandia 34-m VAWT Test Bed, is equipped with a large array of strain gauges that have been placed at critical positions about the blades. This manuscript details a series of four-point bend experiments that were conducted to validate the output of the blade strain gauge circuits. The output of a particular gauge circuit is validated by comparing its output to equivalent gauge circuits (in this stress state) and to theoretical predictions. With only a few exceptions, the difference between measured and predicted strain values for a gauge circuit was found to be of the order of the estimated repeatability for the measurement system.
Sohr-Preston, Sara L.; Scaramella, Laura V.; Martin, Monica J.; Neppl, Tricia K.; Ontai, Lenna; Conger, Rand
2012-01-01
This 3-generation, longitudinal study evaluated a family investment perspective on family socioeconomic status (SES), parental investments in children, and child development. The theoretical framework was tested for first generation parents (G1), their children (G2), and for the children of the second generation (G3). G1 SES was expected to predict clear and responsive parental communication. Parental investments were expected to predict educational attainment and parenting for G2 and vocabulary development for G3. For the 139 families in the study, data were collected when G2 were adolescents and early adults and their oldest biological child (G3) was 3–4 years of age. The results demonstrate the importance of SES and parental investments for the development of children and adolescents across multiple generations. PMID:23199236
Earthquakes triggered by fluid extraction
Segall, P.
1989-01-01
Seismicity is correlated in space and time with production from some oil and gas fields where pore pressures have declined by several tens of megapascals. Reverse faulting has occurred both above and below petroleum reservoirs, and normal faulting has occurred on the flanks of at least one reservoir. The theory of poroelasticity requires that fluid extraction locally alter the state of stress. Calculations with simple geometries predict stress perturbations that are consistent with observed earthquake locations and focal mechanisms. Measurements of surface displacement and strain, pore pressure, stress, and poroelastic rock properties in such areas could be used to test theoretical predictions and improve our understanding of earthquake mechanics. -Author
NASA Technical Reports Server (NTRS)
Beyer, T. B.; Powell, C. A.; Daniels, E. F.; Pope, L. D.
1984-01-01
In-flight noise level measurements were made within two cabin configurations of a general aviation business aircraft. The Fairchild Merlin IVC twin-engine aircraft was tested with bare walls and fiberglass insulation and in an executive trim configuration. Narrow-band and octave format data were subjected to analyses which permitted identification of the blade passage harmonics (BPH). Cabin noise level reductions (insertion losses) due to added insulation varied with position in the cabin, the BPH number, cabin pressure, and engine torque. The measurements were closely predicted using the propeller aircraft interior noise (PAIN) mode.
NASA Astrophysics Data System (ADS)
Mukhanov, V. F.
2016-10-01
In March 2013, following an accurate processing of available measurement data, the Planck Scientific Collaboration published the highest-resolution photograph ever of the early Universe when it was only a few hundred thousand years old. The photograph showed galactic seeds in sufficient detail to test some nontrivial theoretical predictions made more than thirty years ago. Most amazing was that all predictions were confirmed to be remarkably accurate. With no exaggeration, we may consider it established experimentally that quantum physics, which is normally assumed to be relevant on the atomic and subatomic scale, also works on the scale of the entire Universe, determining its structure with all its galaxies, stars, and planets.
Interior noise considerations for advanced high-speed turboprop aircraft
NASA Technical Reports Server (NTRS)
Mixson, J. S.; Farassat, F.; Leatherwood, J. D.; Prydz, R.; Revell, J. D.
1982-01-01
This paper describes recent research on noise generated by high-speed propellers, on noise transmission through acoustically treated aircraft sidewalls and on subjective response to simulated turboprop noise. Propeller noise discussion focuses on theoretical prediction methods for complex blade shapes designed for low noise at Mach = 0.8 flight and on comparisons with experimental test results. Noise transmission experiments using a 168 cm. diameter aircraft fuselage model and scaled heavy-double-wall treatments indicate that the treatments perform well and that the predictions are usually conservative. Studies of subjective comfort response in an anechoic environment are described for noise signatures having combinations of broadband and propeller-type tone components.
Results From Phase-1 and Phase-2 GOLD Experiments
NASA Technical Reports Server (NTRS)
Wilson, K.; Jeganathan, M.; Lesh, J. R.; James, J.; Xu, G.
1997-01-01
The Ground/Orbiter Lasercomm Demonstration conducted between the Japanese Engineering Test Satellite (ETS-VI) and the ground station at JPL's Table Mountain Facility, Wrightwood, California, was the rst ground-to-space two-way optical communications experiment. Experiment objectives included validating the performance predictions of the optical link. Atmospheric attenuation and seeing measurements were made during the experiment, and data were analyzed. Downlink telemetry data recovered over the course of the experiment provided information on in-orbit performance of the ETS-VI's laser communications equipment. Biterror rates as low as 10 4 were measured on the uplink and 10 5 on the downlink. Measured signal powers agreed well with theoretical predictions.
The growth of business firms: theoretical framework and empirical evidence.
Fu, Dongfeng; Pammolli, Fabio; Buldyrev, S V; Riccaboni, Massimo; Matia, Kaushik; Yamasaki, Kazuko; Stanley, H Eugene
2005-12-27
We introduce a model of proportional growth to explain the distribution P(g)(g) of business-firm growth rates. The model predicts that P(g)(g) is exponential in the central part and depicts an asymptotic power-law behavior in the tails with an exponent zeta = 3. Because of data limitations, previous studies in this field have been focusing exclusively on the Laplace shape of the body of the distribution. In this article, we test the model at different levels of aggregation in the economy, from products to firms to countries, and we find that the predictions of the model agree with empirical growth distributions and size-variance relationships.
Austvoll-Dahlgren, Astrid; Falk, Ragnhild S; Helseth, Sølvi
2012-12-01
Peoples' ability to obtain health information is a precondition for their effective participation in decision making about health. However, there is limited evidence describing which cognitive factors can predict the intention of people to search for health information. To test the utility of a questionnaire in predicting intentions to search for health information, and to identify important predictors associated with this intention such that these could be targeted in an Intervention. A questionnaire was developed based on the Theory of Planned Behaviour and tested on both a mixed population sample (n=30) and a sample of parents (n = 45). The questionnaire was explored by testing for internal consistency, calculating inter-correlations between theoretically-related constructs, and by using multiple regression analysis. The reliability and validity of the questionnaire were found to be satisfactory and consistent across the two samples. The questionnaires' direct measures prediction of intention was high and accounted for 47% and 55% of the variance in behavioural intentions. Attitudes and perceived behavioural control were identified as important predictors to intention for search for health information. The questionnaire may be a useful tool for understanding and evaluating behavioural intentions and beliefs related to searches for health information. © 2012 The authors. Health Information and Libraries Journal © 2012 Health Libraries Group.
Accelerated fatigue durability of a high performance composite
NASA Technical Reports Server (NTRS)
Rotem, A.
1982-01-01
The fatigue behavior of multidirectional graphite-epoxy laminates was analyzed theoretically and experimentally in an effort to establish an accelerated testing methodology. Analysis of the failure mechanism in fatigue of the laminates led to the determination of the failure mode governing fracture. The nonlinear, cyclic-dependent shear modulus was used to calculate the changing stress field in the laminate during the fatigue loading. Fatigue tests were performed at three different temperatures: 25 C, 74 C, and 114 C. The prediction of the S-N curves was made based on the artificial static strength artificial static strength at a reference temperature and the fatigue functions associated with them. The prediction of an S-N curve at other temperatures was performed using shifting factors determined for the specific failure mode. For multidirectional laminates, different S-N curves at different temperatures could be predicted using these shifting factors. Different S-N curves at different temperatures occur only when the fatigue failure mode is matrix dominated. It was found that whenever the fatigue failure mode is fiber dominated, temperature, over the range investigated, had no influence on the fatigue life. These results permit the prediction of long-time, low temperature fatigue behavior from data obtained in short time, high temperature testing, for laminates governed by a matrix failure mode.
A competitive complex formation mechanism underlies trichome patterning on Arabidopsis leaves
Digiuni, Simona; Schellmann, Swen; Geier, Florian; Greese, Bettina; Pesch, Martina; Wester, Katja; Dartan, Burcu; Mach, Valerie; Srinivas, Bhylahalli Purushottam; Timmer, Jens; Fleck, Christian; Hulskamp, Martin
2008-01-01
Trichome patterning in Arabidopsis serves as a model system for de novo pattern formation in plants. It is thought to typify the theoretical activator–inhibitor mechanism, although this hypothesis has never been challenged by a combined experimental and theoretical approach. By integrating the key genetic and molecular data of the trichome patterning system, we developed a new theoretical model that allows the direct testing of the effect of experimental interventions and in the prediction of patterning phenotypes. We show experimentally that the trichome inhibitor TRIPTYCHON is transcriptionally activated by the known positive regulators GLABRA1 and GLABRA3. Further, we demonstrate by particle bombardment of protein fusions with GFP that TRIPTYCHON and CAPRICE but not GLABRA1 and GLABRA3 can move between cells. Finally, theoretical considerations suggest promoter swapping and basal overexpression experiments by means of which we are able to discriminate three biologically meaningful variants of the trichome patterning model. Our study demonstrates that the mutual interplay between theory and experiment can reveal a new level of understanding of how biochemical mechanisms can drive biological patterning processes. PMID:18766177
REVIEWS OF TOPICAL PROBLEMS: Prediction and discovery of new structures in spiral galaxies
NASA Astrophysics Data System (ADS)
Fridman, Aleksei M.
2007-02-01
A review is given of the last 20 years of published research into the nature, origin mechanisms, and observed features of spiral-vortex structures found in galaxies. The so-called rotating shallow water experiments are briefly discussed, carried out with a facility designed by the present author and built at the Russian Scientific Center 'Kurchatov Institute' to model the origin of galactic spiral structures. The discovery of new vortex-anticyclone structures in these experiments stimulated searching for them astronomically using the RAS Special Astrophysical Observatory's 6-meter BTA optical telescope, formerly the world's and now Europe's largest. Seven years after the pioneering experiments, Afanasyev and the present author discovered the predicted giant anticyclones in the galaxy Mrk 1040 by using BTA. Somewhat later, the theoretical prediction of giant cyclones in spiral galaxies was made, also to be verified by BTA afterwards. To use the observed line-of-sight velocity field for reconstructing the 3D velocity vector distribution in a galactic disk, a method for solving a problem from the class of ill-posed astrophysical problems was developed by the present author and colleagues. In addition to the vortex structure, other new features were discovered — in particular, slow bars (another theoretical prediction), for whose discovery an observational test capable of distinguishing them from their earlier-studied normal (fast) counterparts was designed.
NASA Technical Reports Server (NTRS)
Russell, Samuel S.; Lansing, Matthew D.
1997-01-01
This effort used a new and novel method of acquiring strains called Sub-pixel Digital Video Image Correlation (SDVIC) on impact damaged Kevlar/epoxy filament wound pressure vessels during a proof test. To predict the burst pressure, the hoop strain field distribution around the impact location from three vessels was used to train a neural network. The network was then tested on additional pressure vessels. Several variations on the network were tried. The best results were obtained using a single hidden layer. SDVIC is a fill-field non-contact computer vision technique which provides in-plane deformation and strain data over a load differential. This method was used to determine hoop and axial displacements, hoop and axial linear strains, the in-plane shear strains and rotations in the regions surrounding impact sites in filament wound pressure vessels (FWPV) during proof loading by internal pressurization. The relationship between these deformation measurement values and the remaining life of the pressure vessels, however, requires a complex theoretical model or numerical simulation. Both of these techniques are time consuming and complicated. Previous results using neural network methods had been successful in predicting the burst pressure for graphite/epoxy pressure vessels based upon acoustic emission (AE) measurements in similar tests. The neural network associates the character of the AE amplitude distribution, which depends upon the extent of impact damage, with the burst pressure. Similarly, higher amounts of impact damage are theorized to cause a higher amount of strain concentration in the damage effected zone at a given pressure and result in lower burst pressures. This relationship suggests that a neural network might be able to find an empirical relationship between the SDVIC strain field data and the burst pressure, analogous to the AE method, with greater speed and simplicity than theoretical or finite element modeling. The process of testing SDVIC neural network analysis and some encouraging preliminary results are presented in this paper. Details are given concerning the processing of SDVIC output data such that it may be used as back propagation neural network (BPNN) input data. The software written to perform this processing and the BPNN algorithm are also discussed. It will be shown that, with limited training, test results indicate an average error in burst pressure prediction of approximately six percent,
NASA Astrophysics Data System (ADS)
Tan, Wei; Zhang, Caihong; Li, Chun; Zhou, Xiaoying; Jia, Xiaoqing; Feng, Zheng; Su, Juan; Jin, Biaobing
2017-05-01
We demonstrate that the subradiant mode in ultrathin bi-layer metamaterials can be exclusively excited under two-antisymmetric-beam illumination (or equivalently, at a node of the standing wave field), while the superradiant mode is fully suppressed due to their different mode symmetry. Coherent perfect absorption (CPA) with the Lorentzian lineshape can be achieved corresponding to the subradiant mode. A theoretical model is established to distinguish the different behaviors of these two modes and to elucidate the CPA condition. Terahertz ultrathin bi-layer metamaterials on flexible polyimide substrates are fabricated and tested, exhibiting excellent agreement with theoretical predictions. This work provides physical insight into how to selectively excite the antisymmetric subradiant mode via coherence incidence.
NASA Technical Reports Server (NTRS)
Wentz, W. H., Jr.; Fiscko, K. A.
1978-01-01
Surface pressure distributions were measured for the 13% thick GA(W)-2 airfoil section fitted with 20% aileron, 25% slotted flap and 30% Fowler flap. All tests were conducted at a Reynolds number of 2.2 x 10 to the 6th power and a Mach number of 0.13. Pressure distribution and force and moment coefficient measurements are compared with theoretical results for a number of cases. Agreement between theory and experiment is generally good for low angles of attack and small flap deflections. For high angles and large flap deflections where regions of separation are present, the theory is inadequate. Theoretical drag predictions are poor for all flap-extended cases.
Zavala, Egbert
2017-05-01
This study analyzed data from the Police Stress and Domestic Violence in Police Families in Baltimore, Maryland, 1997-1999 ( N = 753) to examine propositions derived from target congruence theory in the context of intimate partner violence (IPV) victimization experienced by police officers. Specifically, this study tested the influence of target vulnerability, target gratifiability, and target antagonism on IPV victimization. Results from logistic regression models showed that all three theoretical constructs positively and significantly predicted IPV victimization. Results, as well as the study's limitations and directions for future research, are discussed.
Inhibition of nuclear waste solutions containing multiple aggressive anions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Congdon, J.W.
1988-01-01
The inhibition of localized corrosion of carbon steel in caustic, high-level radioactive waste solutions was studied using cyclic potentiodynamic polarization scans, supplemented by partially immersed coupon tests. The electrochemical tests provided a rapid and accurate means of determining the relationship between the minimum inhibitor requirements and the concentration of the aggressive anions in this system. Nitrate, sulfate, chloride, and fluoride were identified as aggressive anions, however, no synergistic effects were observed between these anions. This observation may have important theoretical implications because it tends to contradict the behavior of aggressive anions as predicted by existing theories for localized corrosion.
Inhibition of nuclear waste solutions containing multiple aggressive anions
DOE Office of Scientific and Technical Information (OSTI.GOV)
Congdon, J.W.
1988-05-01
The inhibition of localized corrosion of carbon steel in caustic, high-level radioactive waste solutions was studied using cyclic potentiodynamic polarization scans supplemented by partially immersed coupon tests. The electrochemical tests provided a rapid and accurate means of determining the relationship between the minimum inhibitor requirements and the concentration of the aggressive anions in this system. Nitrate, sulfate, chloride, and fluoride were identified as aggressive anions; however, no synergistic effects were observed between these anions. This observation may have important theoretical implications because it tends to contradict the behavior of aggressive anions as predicted by existing theories for localized corrosion.
Suits reflectance models for wheat and cotton - Theoretical and experimental tests
NASA Technical Reports Server (NTRS)
Chance, J. E.; Lemaster, E. W.
1977-01-01
Plant canopy reflectance models developed by Suits are tested for cotton and Penjamo winter wheat. Properties of the models are discussed, and the concept of model depth is developed. The models' predicted exchange symmetry for specular irradiance with respect to sun polar angle and observer polar angle agreed with field data for cotton and wheat. Model calculations and experimental data for wheat reflectance vs sun angle disagreed. Specular reflectance from 0.50 to 1.10 micron shows fair agreement between the model and wheat measurements. An Appendix includes the physical and optical parameters for wheat necessary to apply Suits' models.
Application of active controls technology to aircraft bide smoothing systems
NASA Technical Reports Server (NTRS)
Lapins, M.; Jacobson, I. D.
1975-01-01
A critical review of past efforts in the design and testing of ride smoothing and gust alleviation systems is presented. Design trade offs involving sensor types, choice of feedback loops, human comfort, and aircraft handling-qualities criteria are discussed. Synthesis of a system designed to employ direct-lift and side-force producing surfaces is reported. Two STOL aircraft and an executive transport are considered. Theoretically predicted system performance is compared with hybrid simulation and flight test data. Pilot opinion rating, pilot workload, and passenger comfort rating data for the basic and augmented aircraft are included.
Thermal design verification testing for the ATS-F and -G spacecraft.
NASA Technical Reports Server (NTRS)
Coyle, M.; Greenwell, J.
1972-01-01
There is a wide fluctuation in the internal power dissipation from the components within the earth viewing module (EVM). The electronic component functional reliability required for a two-to-five year mission is the most significant factor for the thermal design criteria. A mathematical thermal model of the EVM and the orbital environment is used to predict the performance of the thermal control system. Comparisons of the results obtained in chamber thermal balance tests with the data computed on the basis of the theoretical model provide the means for validating the thermal design.
Application of Active Controls Technology to Aircraft Ride Smoothing Systems
NASA Technical Reports Server (NTRS)
Lapins, Maris; Jacobson, Ira D.
1975-01-01
A critical review of past efforts in the design and testing of ride smoothing and gust alleviation systems is presented. Design trade-offs involving sensor types, choice of feedback loops, human comfort and aircraft handling-qualities criteria are discussed. Synthesis of a system designed to employ direct-lift and side-force producing surfaces is reported. Two STOL-class aircraft and an executive transport are considered. Theoretically-predicted system performance is compared with hybrid simulation and flight test data. Pilot opinion rating, pilot workload, and passenger comfort rating data for the basic and augmented aircraft are included.
Grazing Incidence Optics for X-rays Interferometry
NASA Technical Reports Server (NTRS)
Shipley, Ann; Zissa, David; Cash, Webster; Joy, Marshall
1999-01-01
Grazing incidence mirror parameters and constraints for x-ray interferometry are described. We present interferometer system tolerances and ray trace results used to define mirror surface accuracy requirements. Mirror material, surface figure, roughness, and geometry are evaluated based on analysis results. We also discuss mirror mount design constraints, finite element analysis, environmental issues, and solutions. Challenges associated with quantifying high accuracy mirror surface quality are addressed and test results are compared with theoretical predictions.
Methods for Evaluating Flammability Characteristics of Shipboard Materials
1994-02-28
E 23 • smoke optical properties; and • (toxic) gas production rates. In general, the prediction of these full-scale burning characteristics requires ...Method. The ASTM Room/Corner Test Method can be used to calculate the heat release rate of a material based upon oxygen depletion calorimetry. As can be...Clearly, more validation is required for the theoretical calculations . All are consistent in the use of calorimeter and UFT-type property data, all show
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hawkins, C.A.
Tests of QED to order ..cap alpha../sup 4/ performed with the ASP detector at PEP are presented. Measurements have been made of exclusive e/sup +/e/sup -/e/sup +/e/sup -/, e/sup +/e/sup -/..gamma gamma.. and ..gamma gamma gamma gamma.. final states with all particles above 50 milliradians with respect to the e/sup +/e/sup -/ beam line. These measurements represent a significant increase in statistics over previous measurements. All measurements agree well with theoretical predictions. 5 refs., 1 tab.
High intensity acoustic tests of a thermally stressed aluminum plate in TAFA
NASA Technical Reports Server (NTRS)
Ng, Chung Fai; Clevenson, Sherman A.
1989-01-01
An investigation was conducted in the Thermal Acoustic Fatigue Apparatus at the Langley Research Center to study the acoustically excited random motion of an aluminum plate which is buckled due to thermal stresses. The thermal buckling displacements were measured and compared with theory. The general trends of the changes in resonances frequencies and random responses of the plate agree with previous theoretical prediction and experimental results for a mechanically buckled plate.
Eshelby inclusions in granular matter: Theory and simulations.
McNamara, Sean; Crassous, Jérôme; Amon, Axelle
2016-08-01
We present a numerical implementation of an active inclusion in a granular material submitted to a biaxial test. We discuss the dependence of the response to this perturbation on two parameters: the intragranular friction coefficient on one hand, and the degree of the loading on the other hand. We compare the numerical results to theoretical predictions taking into account the change of volume of the inclusion as well as the anisotropy of the elastic matrix.
2012-01-30
CFRP LAMINATES FOR MARINE USE Sa. CONTRACT NUMBER 5b. GRANT NUMBER N00014-06-1-1139 Sc. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Miyano, Yasushi...prediction of CFRP laminates proposed and confirmed experimentally in the previous ONR project of Grant # N000140110949 was verified theoretically and refined...DURABILITY OF CFRP LAMINATES FOR MARINE USE Principal Investigator Yasushi Miyano Co-principal Investigator Isao Kimpara Materials System
Turbofan aft duct suppressor study. Contractor's data report of mode probe signal data
NASA Technical Reports Server (NTRS)
Fiske, G. H.; Motsinger, R. E.; Syed, A. A.; Joshi, M. C.; Kraft, R. E.
1983-01-01
Acoustic modal distributions were measured in a fan test model having an annular exhaust duct for comparison with theoretically predicted acoustic suppression values. This report contains the amplitude and phase data of the acoustic signals sensed by the transducers of the two mode probes employed in the measurement. Each mode probe consisted of an array of 12 transducers sensing the acoustic field at three axial positions and four radial positions.
Navarrete, Gorka; Correia, Rut; Sirota, Miroslav; Juanchich, Marie; Huepe, David
2015-01-01
Most of the research on Bayesian reasoning aims to answer theoretical questions about the extent to which people are able to update their beliefs according to Bayes' Theorem, about the evolutionary nature of Bayesian inference, or about the role of cognitive abilities in Bayesian inference. Few studies aim to answer practical, mainly health-related questions, such as, “What does it mean to have a positive test in a context of cancer screening?” or “What is the best way to communicate a medical test result so a patient will understand it?”. This type of research aims to translate empirical findings into effective ways of providing risk information. In addition, the applied research often adopts the paradigms and methods of the theoretically-motivated research. But sometimes it works the other way around, and the theoretical research borrows the importance of the practical question in the medical context. The study of Bayesian reasoning is relevant to risk communication in that, to be as useful as possible, applied research should employ specifically tailored methods and contexts specific to the recipients of the risk information. In this paper, we concentrate on the communication of the result of medical tests and outline the epidemiological and test parameters that affect the predictive power of a test—whether it is correct or not. Building on this, we draw up recommendations for better practice to convey the results of medical tests that could inform health policy makers (What are the drawbacks of mass screenings?), be used by health practitioners and, in turn, help patients to make better and more informed decisions. PMID:26441711
NASA Astrophysics Data System (ADS)
Zuluaga, Jorge I.; Sucerquia, Mario
2018-06-01
Tunguska and Chelyabinsk impact events occurred inside a geographical area of only 3.4 per cent of the Earth's surface. Although two events hardly constitute a statistically significant demonstration of a geographical pattern of impacts, their spatial coincidence is at least tantalizing. To understand if this concurrence reflects an underlying geographical and/or temporal pattern, we must aim at predicting the spatio-temporal distribution of meteoroid impacts on Earth. For this purpose we designed, implemented, and tested a novel numerical technique, the `Gravitational Ray Tracing' (GRT) designed to compute the relative impact probability (RIP) on the surface of any planet. GRT is inspired by the so-called ray-casting techniques used to render realistic images of complex 3D scenes. In this paper we describe the method and the results of testing it at the time of large impact events. Our findings suggest a non-trivial pattern of impact probabilities at any given time on the Earth. Locations at 60-90° from the apex are more prone to impacts, especially at midnight. Counterintuitively, sites close to apex direction have the lowest RIP, while in the antapex RIP are slightly larger than average. We present here preliminary maps of RIP at the time of Tunguska and Chelyabinsk events and found no evidence of a spatial or temporal pattern, suggesting that their coincidence was fortuitous. We apply the GRT method to compute theoretical RIP at the location and time of 394 large fireballs. Although the predicted spatio-temporal impact distribution matches marginally the observed events, we successfully predict their impact speed distribution.
Fear and Loving in Las Vegas: Evolution, Emotion, and Persuasion.
Griskevicius, Vladas; Goldstein, Noah J; Mortensen, Chad R; Sundie, Jill M; Cialdini, Robert B; Kenrick, Douglas T
2009-06-01
How do arousal-inducing contexts, such as frightening or romantic television programs, influence the effectiveness of basic persuasion heuristics? Different predictions are made by three theoretical models: A general arousal model predicts that arousal should increase effectiveness of heuristics; an affective valence model predicts that effectiveness should depend on whether the context elicits positive or negative affect; an evolutionary model predicts that persuasiveness should depend on both the specific emotion that is elicited and the content of the particular heuristic. Three experiments examined how fear-inducing versus romantic contexts influenced the effectiveness of two widely used heuristics-social proof (e.g., "most popular") and scarcity (e.g., "limited edition"). Results supported predictions from an evolutionary model, showing that fear can lead scarcity appeals to be counter-persuasive, and that romantic desire can lead social proof appeals to be counter-persuasive. The findings highlight how an evolutionary theoretical approach can lead to novel theoretical and practical marketing insights.
NUCLEAR AND HEAVY ION PHYSICS: α-decay half-lives of superheavy nuclei and general predictions
NASA Astrophysics Data System (ADS)
Dong, Jian-Min; Zhang, Hong-Fei; Wang, Yan-Zhao; Zuo, Wei; Su, Xin-Ning; Li, Jun-Qing
2009-08-01
The generalized liquid drop model (GLDM) and the cluster model have been employed to calculate the α-decay half-lives of superheavy nuclei (SHN) using the experimental α-decay Q values. The results of the cluster model are slightly poorer than those from the GLDM if experimental Q values are used. The prediction powers of these two models with theoretical Q values from Audi et al. (QAudi) and Muntian et al. (QM) have been tested to find that the cluster model with QAudi and QM could provide reliable results for Z > 112 but the GLDM with QAudi for Z <= 112. The half-lives of some still unknown nuclei are predicted by these two models and these results may be useful for future experimental assignment and identification.
A rational account of pedagogical reasoning: teaching by, and learning from, examples.
Shafto, Patrick; Goodman, Noah D; Griffiths, Thomas L
2014-06-01
Much of learning and reasoning occurs in pedagogical situations--situations in which a person who knows a concept chooses examples for the purpose of helping a learner acquire the concept. We introduce a model of teaching and learning in pedagogical settings that predicts which examples teachers should choose and what learners should infer given a teacher's examples. We present three experiments testing the model predictions for rule-based, prototype, and causally structured concepts. The model shows good quantitative and qualitative fits to the data across all three experiments, predicting novel qualitative phenomena in each case. We conclude by discussing implications for understanding concept learning and implications for theoretical claims about the role of pedagogy in human learning. Copyright © 2014 Elsevier Inc. All rights reserved.
Concurrent and Predictive Validity of Parent Reports of Child Language at Ages 2 and 3 Years
Campbell, Thomas F.; Kurs-Lasky, Marcia; Rockette, Howard E.; Dale, Philip S.; Colborn, D. Kathleen; Paradise, Jack L.
2005-01-01
The MacArthur–Bates Communicative Development Inventories (CDI; Dale, 1996; Fenson et al., 1994), parent reports about language skills, are being used increasingly in studies of theoretical and public health importance. This study (N = 113) correlated scores on the CDI at ages 2 and 3 years with scores at age 3 years on tests of cognition and receptive language and measures from parent–child conversation. Associations indicated reasonable concurrent and predictive validity. The findings suggest that satisfactory vocabulary scores at age 2 are likely to predict normal language skills at age 3, although some children with limited skills at age 3 will have had satisfactory scores at age 2. Many children with poor vocabulary scores at 2 will have normal skills at 3. PMID:16026501
Experimental and theoretical investigation of fatigue life in reusable rocket thrust chambers
NASA Technical Reports Server (NTRS)
Hannum, N. P.; Kasper, H. J.; Pavli, A. J.
1976-01-01
During a test program to investigate low-cycle thermal fatigue, 13 rocket combustion chambers were fabricated and cyclically test fired to failure. Six oxygen-free, high-conductivity (OFHC) copper and seven Amzirc chambers were tested. The failures in the OFHC copper chambers were not typical fatigue failures but are described as creep rupture enhanced by ratcheting. The coolant channels bulged toward the chamber centerline, resulting in progressive thinning of the wall during each cycle. The failures in the Amzirc alloy chambers were caused by low-cycle thermal fatigue. The zirconium in this alloy was not evenly distributed in the chamber materials. The life that was achieved was nominally the same as would have been predicted from OFHC copper isothermal test data.
Recent research related to prediction of stall/spin characteristics of fighter aircraft
NASA Technical Reports Server (NTRS)
Nguyen, L. T.; Anglin, E. L.; Gilbert, W. P.
1976-01-01
The NASA Langley Research Center is currently engaged in a stall/spin research program to provide the fundamental information and design guidelines required to predict the stall/spin characteristics of fighter aircraft. The prediction methods under study include theoretical spin prediction techniques and piloted simulation studies. The paper discusses the overall status of theoretical techniques including: (1) input data requirements, (2) math model requirements, and (3) correlation between theoretical and experimental results. The Langley Differential Maneuvering Simulator (DMS) facility has been used to evaluate the spin susceptibility of several current fighters during typical air combat maneuvers and to develop and evaluate the effectiveness of automatic departure/spin prevention concepts. The evaluation procedure is described and some of the more significant results of the studies are presented.
Evaluation of the Langley 4- by 7-meter tunnel for propeller noise measurements
NASA Technical Reports Server (NTRS)
Block, P. J. W.; Gentry, G. L., Jr.
1984-01-01
An experimental and theoretical evaluation of the Langley 4- by 7- Meter Tunnel was conducted to determine its suitability for obtaining propeller noise data. The tunnel circuit and open test section are described. An experimental evaluation is performed using microphones placed in and on the tunnel floor. The reflection characteristics and background noise are determined. The predicted source (propeller) near-field/far-field boundary is given using a first-principles method. The effect of the tunnel-floor boundry layer on the noise from the propeller is also predicted. A propeller test stand used for part of his evaluation is also described. The measured propeller performance characteristics are compared with those obtained at a larger scale, and the effect of the test-section configuration on the propeller performance is examined. Finally, propeller noise measurements were obtained on an eight-bladed SR-2 propeller operating at angles of attack -8 deg, 0 deg, and 4.6 deg to give an indication of attainable signal-to-noise ratios.
Evaluation of acoustic testing techniques for spacecraft systems
NASA Technical Reports Server (NTRS)
Cockburn, J. A.
1971-01-01
External acoustic environments, structural responses, noise reductions, and the internal acoustic environments have been predicted for a typical shroud/spacecraft system during lift-off and various critical stages of flight. Spacecraft responses caused by energy transmission from the shroud via mechanical and acoustic paths have been compared and the importance of the mechanical path has been evaluated. Theoretical predictions have been compared extensively with available laboratory and in-flight measurements. Equivalent laboratory acoustic fields for simulation of shroud response during the various phases of flight have been derived and compared in detail. Techniques for varying the time-space correlations of laboratory acoustic fields have been examined, together with methods for varying the time and spatial distribution of acoustic amplitudes. Possible acoustic testing configurations for shroud/spacecraft systems have been suggested and trade-off considerations have been reviewed. The problem of simulating the acoustic environments versus simulating the structural responses has been considered and techniques for testing without the shroud installed have been discussed.
NASA Technical Reports Server (NTRS)
Smith, Tamara A.
1988-01-01
Through the use of theoretical predictions of fluid properties and experimental heat transfer and thrust measurements, the zones of laminar, transitional, and turbulent boundary layer flow were defined for the NASA Lewis 1039:1 area ratio rocket nozzle. Tests were performed on the nozzle at chamber pressures from 350 to 100 psia. For these conditions, the throat diameter Reynolds numbers varied from 300,000 to 1 million. The propellants used were gaseous hydrogen and gaseous oxygen. Thrust measurements and nozzle outer wall temperature measurements were taken during the 3-sec test runs. Comparison of experimental heat transfer and thrust data with the corresponding predictions from the Two-Dimensional Kinetics (TDK) nozzle analysis program indicated laminar flow in the nozzle at a throat diameter Reynolds number of 320,000 or chamber pressure of 360 psia. Comparison of experimental and predicted heat transfer data indicated transitional flow up to and including a chamber pressure of 1000 psia. Predicted values of the axisymmetric acceleration parameter within the convergent and divergent nozzle were consistent with the above results. Based upon an extrapolation of the heat transfer data and predicted distributions of the axisymmetric acceleration parameter, transitional flow was predicted up to a throat diameter Reynolds number of 220,000 or 2600-psia chamber pressure. Above 2600-psia chamber pressure, fully developed turbulent flow was predicted.
NASA Technical Reports Server (NTRS)
Smith, Tamara A.
1988-01-01
Through the use of theoretical predictions of fluid properties and experimental heat transfer and thrust measurements, the zones of laminar, transitional, and turbulent boundary layer flow were defined for the NASA Lewis 1030:1 area ratio rocket nozzle. Tests were performed on the nozzle at chamber pressures from 350 to 100 psia. For these conditions, the throat diameter Reynolds numbers varied from 300,000 to 1 million. The propellants used were gaseous hydrogen and gaseous oxygen. Thrust measurements and nozzle outer wall temperature measurements were taken during the 3-sec test runs. Comparison of experimental heat transfer and thrust data with the corresponding predictions from the Two-Dimensional Kinetics (TDK) nozzle analysis program indicated laminar flow in the nozzle at a throat diameter Reynolds number of 320,000 or chamber pressure of 360 psia. Comparison of experimental and predicted heat transfer data indicated transitional flow up to and including a chamber pressure of 1000 psia. Predicted values of the axisymmetric acceleration parameter within the convergent and divergent nozzle were consistent with the above results. Based upon an extrapolation of the heat transfer data and predicted distributions of the axisymmetric acceleration parameter, transitional flow was predicted up to a throat diameter Reynolds number of 220,000 or 2600-psia chamber pressure. Above 2600-psia chamber pressure, fully developed turbulent flow was predicted.
Jones, Andrew S; Taktak, Azzam G F; Helliwell, Timothy R; Fenton, John E; Birchall, Martin A; Husband, David J; Fisher, Anthony C
2006-06-01
The accepted method of modelling and predicting failure/survival, Cox's proportional hazards model, is theoretically inferior to neural network derived models for analysing highly complex systems with large datasets. A blinded comparison of the neural network versus the Cox's model in predicting survival utilising data from 873 treated patients with laryngeal cancer. These were divided randomly and equally into a training set and a study set and Cox's and neural network models applied in turn. Data were then divided into seven sets of binary covariates and the analysis repeated. Overall survival was not significantly different on Kaplan-Meier plot, or with either test model. Although the network produced qualitatively similar results to Cox's model it was significantly more sensitive to differences in survival curves for age and N stage. We propose that neural networks are capable of prediction in systems involving complex interactions between variables and non-linearity.
Morea, Jessica M; Friend, Ronald; Bennett, Robert M
2008-12-01
Illness self-concept (ISC), or the extent to which individuals are consumed by their illness, was theoretically described and evaluated with the Illness Self-Concept Scale (ISCS), a new 23-item scale, to predict adjustment in fibromyalgia. To establish convergent and discriminant validity, illness self-concept was compared to self-esteem and optimism in predicting health status, illness intrusiveness, depression, and life satisfaction. The ISCS demonstrated good reliability (alpha = .94; test-retest r = .80) and was a strong predictor of outcomes, even after controlling for optimism or self-esteem. The ISCS predicted unique variance in health-related outcomes; optimism and self-esteem did not, providing construct validation. Illness self-concept may play a significant role in coping with fibromyalgia and may prove useful in the evaluation of other chronic illnesses. (c) 2008 Wiley Periodicals, Inc.
Pérez-Garrido, Alfonso; Morales Helguera, Aliuska; Abellán Guillén, Adela; Cordeiro, M Natália D S; Garrido Escudero, Amalio
2009-01-15
This paper reports a QSAR study for predicting the complexation of a large and heterogeneous variety of substances (233 organic compounds) with beta-cyclodextrins (beta-CDs). Several different theoretical molecular descriptors, calculated solely from the molecular structure of the compounds under investigation, and an efficient variable selection procedure, like the Genetic Algorithm, led to models with satisfactory global accuracy and predictivity. But the best-final QSAR model is based on Topological descriptors meanwhile offering a reasonable interpretation. This QSAR model was able to explain ca. 84% of the variance in the experimental activity, and displayed very good internal cross-validation statistics and predictivity on external data. It shows that the driving forces for CD complexation are mainly hydrophobic and steric (van der Waals) interactions. Thus, the results of our study provide a valuable tool for future screening and priority testing of beta-CDs guest molecules.
Thermal stability tests of CFRP sandwich panels for far infrared astronomy
NASA Technical Reports Server (NTRS)
Hoffmann, W. F.; Helwig, G.; Scheulen, D.
1986-01-01
An account is given of fabrication methods and low temperature figure tests for CFRP sandwich panels, in order to ascertain their applicability to ultralightweight 3-m aperture primary mirrors for balloon-borne sub-mm and far-IF telescopes that must maintain a 1-2 micron rms surface figure accuracy at -40 to -50 C. Optical figure measurements on the first two of a series of four 0.5-m test panels, replicated to a spherical surface, show a radius-of-curvature change and astigmatism down to -60 C; this approximately follows the composite's theoretical predictions and implies that material and process control is excellent, so that the large scale changes observed can be compensated for.
Buckling behavior of Rene 41 tubular panels for a hypersonic aircraft wing
NASA Technical Reports Server (NTRS)
Ko, W. L.; Fields, R. A.; Shideler, J. L.
1986-01-01
The buckling characteristics of Rene 41 tubular panels for a hypersonic aircraft wing were investigated. The panels were repeatedly tested for buckling characteristics using a hypersonic wing test structure and a universal tension/compression testing machine. The nondestructive buckling tests were carried out under different combined load conditions and in different temperature environments. The force/stiffness technique was used to determine the buckling loads of the panels. In spite of some data scattering resulting from large extrapolations of the data-fitting curve (because of the termination of applied loads at relatively low percentages of the buckling loads), the overall test data correlate fairly well with theoretically predicted buckling interaction curves. Also, the structural efficiency of the tubular panels was found to be slightly higher than that of beaded panels.
Buckling behavior of Rene 41 tubular panels for a hypersonic aircraft wing
NASA Technical Reports Server (NTRS)
Ko, W. L.; Shideler, J. L.; Fields, R. A.
1986-01-01
The buckling characteristics of Rene 41 tubular panels for a hypersonic aircraft wing were investigated. The panels were repeatedly tested for buckling characteristics using a hypersonic wing test structure and a universal tension/compression testing machine. The nondestructive buckling tests were carried out under different combined load conditions and in different temperature environments. The force/stiffness technique was used to determine the buckling loads of the panel. In spite of some data scattering, resulting from large extrapolations of the data fitting curve (because of the termination of applied loads at relatively low percentages of the buckling loads), the overall test data correlate fairly well with theoretically predicted buckling interaction curves. Also, the structural efficiency of the tubular panels was found to be slightly higher than that of beaded panels.
NASA Astrophysics Data System (ADS)
Riest, Jonas; Nägele, Gerhard; Liu, Yun; Wagner, Norman J.; Godfrin, P. Douglas
2018-02-01
Recently, atypical static features of microstructural ordering in low-salinity lysozyme protein solutions have been extensively explored experimentally and explained theoretically based on a short-range attractive plus long-range repulsive (SALR) interaction potential. However, the protein dynamics and the relationship to the atypical SALR structure remain to be demonstrated. Here, the applicability of semi-analytic theoretical methods predicting diffusion properties and viscosity in isotropic particle suspensions to low-salinity lysozyme protein solutions is tested. Using the interaction potential parameters previously obtained from static structure factor measurements, our results of Monte Carlo simulations representing seven experimental lysoyzme samples indicate that they exist either in dispersed fluid or random percolated states. The self-consistent Zerah-Hansen scheme is used to describe the static structure factor, S(q), which is the input to our calculation schemes for the short-time hydrodynamic function, H(q), and the zero-frequency viscosity η. The schemes account for hydrodynamic interactions included on an approximate level. Theoretical predictions for H(q) as a function of the wavenumber q quantitatively agree with experimental results at small protein concentrations obtained using neutron spin echo measurements. At higher concentrations, qualitative agreement is preserved although the calculated hydrodynamic functions are overestimated. We attribute the differences for higher concentrations and lower temperatures to translational-rotational diffusion coupling induced by the shape and interaction anisotropy of particles and clusters, patchiness of the lysozyme particle surfaces, and the intra-cluster dynamics, features not included in our simple globular particle model. The theoretical results for the solution viscosity, η, are in qualitative agreement with our experimental data even at higher concentrations. We demonstrate that semi-quantitative predictions of diffusion properties and viscosity of solutions of globular proteins are possible given only the equilibrium structure factor of proteins. Furthermore, we explore the effects of changing the attraction strength on H(q) and η.
Ayres, Cynthia; Mahat, Ganga; Atkins, Robert
2013-01-01
To examine variables influencing the positive health practices (PHP) of Filipino college students to gain a better understanding of health practices in this ethnic/racial group. Cross-sectional study tested theoretical relationships postulated among (a) PHP, (b) social support (SS), (c) optimism, and (d) acculturation. A sample of Filipino college students (N = 226) aged 18 to 21 was obtained in June 2009. Participants completed 4 instruments. Statistical analyses were performed using SPSS 16.0. Positive correlations were found between PHP and SS (r = .39, p = .01) and optimism and PHP (r = .36, p = .01). No correlation was found between PHP and acculturation. Optimism and SS predicted performance of PHP (R (2) = .18, F[2, 221] = 24.927, p < .001). A difference was found in acculturation levels between participants who grew up in the United States (t[223] = 4.5, p < .001) and those who did not. Findings help health practitioners and educators to better understand the underlying factors that influence PHP in this population.
Analysis of Nonplanar Wing-tip-mounted Lifting Surfaces on Low-speed Airplanes
NASA Technical Reports Server (NTRS)
Vandam, C. P.; Roskam, J.
1983-01-01
Nonplanar wing tip mounted lifting surfaces reduce lift induced drag substantially. Winglets, which are small, nearly vertical, winglike surfaces, are an example of these devices. To achieve reduction in lift induced drag, winglets produce significant side forces. Consequently, these surfaces can seriously affect airplane lateral directional aerodynamic characteristics. Therefore, the effects of nonplanar wing tip mounted surfaces on the lateral directional stability and control of low speed general aviation airplanes were studied. The study consists of a theoretical and an experimental, in flight investigation. The experimental investigation involves flight tests of winglets on an agricultural airplane. Results of these tests demonstrate the significant influence of winglets on airplane lateral directional aerodynamic characteristics. It is shown that good correlations exist between experimental data and theoretically predicted results. In addition, a lifting surface method was used to perform a parametric study of the effects of various winglet parameters on lateral directional stability derivatives of general aviation type wings.
Kruglanski, A W; Atash, M N; DeGrada, E; Mannetti, L; Pierro, A; Webster, D M
1997-11-01
S. L. Neuberg, T. N. Judice, and S. G. West (1997) faulted our work with the Need for Closure Scale (NFCS) on grounds that the NFCS lacks discriminant validity relative to S. L. Neuberg's and J. T. Newsom's (1993) Personal Need for Structure (PNS) Scale and is multidimensional, which, so they claim, renders the use of its total score inadmissible. By contrast, the present authors show that neither of the above assertions is incompatible with the underlying need for closure theory. Relations between NFCS and the PNS are to be expected, as these were designed to operationalize the very same construct (of need for closure). Furthermore, no unidimensionality of the NFCS has been claimed, and none is required to use its total score for testing various theoretically derived predictions. An instrument's ultimate utility hinges on theoretical considerations and empirical evidence rather than on questionable psychometric dogma unrelated to the substantive matters at hand.
Cigarette smoking in a student sample: neurocognitive and clinical correlates.
Dinn, Wayne M; Aycicegi, Ayse; Harris, Catherine L
2004-01-01
Why do adolescents begin to smoke in the face of profound health risks and aggressive antismoking campaigns? The present study tested predictions based on two theoretical models of tobacco use in young adults: (1) the self-medication model; and (2) the orbitofrontal/disinhibition model. Investigators speculated that a significant number of smokers were self-medicating since nicotine possesses mood-elevating and hedonic properties. The self-medication model predicts that smokers will demonstrate increased rates of psychopathology relative to nonsmokers. Similarly, researchers have suggested that individuals with attention-deficit/hyperactivity disorder (ADHD) employ nicotine to enhance cognitive function. The ADHD/self-medication model predicts that smokers will perform poorly on tests of executive function and report a greater number of ADHD symptoms. A considerable body of research indicates that tobacco use is associated with several related personality traits including extraversion, impulsivity, risk taking, sensation seeking, novelty seeking, and antisocial personality features. Antisocial behavior and related personality traits as well as tobacco use may reflect, in part, a failure to effectively employ reward and punishment cues to guide behavior. This failure may reflect orbitofrontal dysfunction. The orbitofrontal/disinhibition model predicts that smokers will perform poorly on neurocognitive tasks considered sensitive to orbitofrontal dysfunction and will obtain significantly higher scores on measures of behavioral disinhibition and antisocial personality relative to nonsmokers. To test these predictions, we administered a battery of neuropsychological tests, clinical scales, and personality questionnaires to university student smokers and nonsmokers. Results did not support the self-medication model or the ADHD/self-medication model; however, findings were consistent with the orbitofrontal/disinhibition model.
A state-based probabilistic model for tumor respiratory motion prediction
NASA Astrophysics Data System (ADS)
Kalet, Alan; Sandison, George; Wu, Huanmei; Schmitz, Ruth
2010-12-01
This work proposes a new probabilistic mathematical model for predicting tumor motion and position based on a finite state representation using the natural breathing states of exhale, inhale and end of exhale. Tumor motion was broken down into linear breathing states and sequences of states. Breathing state sequences and the observables representing those sequences were analyzed using a hidden Markov model (HMM) to predict the future sequences and new observables. Velocities and other parameters were clustered using a k-means clustering algorithm to associate each state with a set of observables such that a prediction of state also enables a prediction of tumor velocity. A time average model with predictions based on average past state lengths was also computed. State sequences which are known a priori to fit the data were fed into the HMM algorithm to set a theoretical limit of the predictive power of the model. The effectiveness of the presented probabilistic model has been evaluated for gated radiation therapy based on previously tracked tumor motion in four lung cancer patients. Positional prediction accuracy is compared with actual position in terms of the overall RMS errors. Various system delays, ranging from 33 to 1000 ms, were tested. Previous studies have shown duty cycles for latencies of 33 and 200 ms at around 90% and 80%, respectively, for linear, no prediction, Kalman filter and ANN methods as averaged over multiple patients. At 1000 ms, the previously reported duty cycles range from approximately 62% (ANN) down to 34% (no prediction). Average duty cycle for the HMM method was found to be 100% and 91 ± 3% for 33 and 200 ms latency and around 40% for 1000 ms latency in three out of four breathing motion traces. RMS errors were found to be lower than linear and no prediction methods at latencies of 1000 ms. The results show that for system latencies longer than 400 ms, the time average HMM prediction outperforms linear, no prediction, and the more general HMM-type predictive models. RMS errors for the time average model approach the theoretical limit of the HMM, and predicted state sequences are well correlated with sequences known to fit the data.
Sirota, Miroslav; Juanchich, Marie
2018-03-27
The Cognitive Reflection Test, measuring intuition inhibition and cognitive reflection, has become extremely popular because it reliably predicts reasoning performance, decision-making, and beliefs. Across studies, the response format of CRT items sometimes differs, based on the assumed construct equivalence of tests with open-ended versus multiple-choice items (the equivalence hypothesis). Evidence and theoretical reasons, however, suggest that the cognitive processes measured by these response formats and their associated performances might differ (the nonequivalence hypothesis). We tested the two hypotheses experimentally by assessing the performance in tests with different response formats and by comparing their predictive and construct validity. In a between-subjects experiment (n = 452), participants answered stem-equivalent CRT items in an open-ended, a two-option, or a four-option response format and then completed tasks on belief bias, denominator neglect, and paranormal beliefs (benchmark indicators of predictive validity), as well as on actively open-minded thinking and numeracy (benchmark indicators of construct validity). We found no significant differences between the three response formats in the numbers of correct responses, the numbers of intuitive responses (with the exception of the two-option version, which had a higher number than the other tests), and the correlational patterns of the indicators of predictive and construct validity. All three test versions were similarly reliable, but the multiple-choice formats were completed more quickly. We speculate that the specific nature of the CRT items helps build construct equivalence among the different response formats. We recommend using the validated multiple-choice version of the CRT presented here, particularly the four-option CRT, for practical and methodological reasons. Supplementary materials and data are available at https://osf.io/mzhyc/ .
NASA Astrophysics Data System (ADS)
Zhang, Wei
2011-07-01
The longitudinal dispersion coefficient, DL, is a fundamental parameter of longitudinal solute transport models: the advection-dispersion (AD) model and various deadzone models. Since DL cannot be measured directly, and since its calibration using tracer test data is quite expensive and not always available, researchers have developed various methods, theoretical or empirical, for estimating DL by easier available cross-sectional hydraulic measurements (i.e., the transverse velocity profile, etc.). However, for known and unknown reasons, DL cannot be satisfactorily predicted using these theoretical/empirical formulae. Either there is very large prediction error for theoretical methods, or there is a lack of generality for the empirical formulae. Here, numerical experiments using Mike21, a software package that implements one of the most rigorous two-dimensional hydrodynamic and solute transport equations, for longitudinal solute transport in hypothetical streams, are presented. An analysis of the evolution of simulated solute clouds indicates that the two fundamental assumptions in Fischer's longitudinal transport analysis may be not reasonable. The transverse solute concentration distribution, and hence the longitudinal transport appears to be controlled by a dimensionless number ?, where Q is the average volumetric flowrate, Dt is a cross-sectional average transverse dispersion coefficient, and W is channel flow width. A simple empirical ? relationship may be established. Analysis and a revision of Fischer's theoretical formula suggest that ɛ influences the efficiency of transverse mixing and hence has restraining effect on longitudinal spreading. The findings presented here would improve and expand our understanding of longitudinal solute transport in open channel flow.
Gagnon, Marie Pierre; Orruño, Estibalitz; Asua, José; Abdeljelil, Anis Ben; Emparanza, José
2012-01-01
To examine the factors that could influence the decision of healthcare professionals to use a telemonitoring system. A questionnaire, based on the Technology Acceptance Model (TAM), was developed. A panel of experts in technology assessment evaluated the face and content validity of the instrument. Two hundred and thirty-four questionnaires were distributed among nurses and doctors of the cardiology, pulmonology, and internal medicine departments of a tertiary hospital. Cronbach alpha was calculated to measure the internal consistency of the questionnaire items. Construct validity was evaluated using interitem correlation analysis. Logistic regression analysis was performed to test the theoretical model. Adjusted odds ratios (ORs) and their 95% confidence intervals (CIs) were computed. A response rate of 39.7% was achieved. With the exception of one theoretical construct (Habit) that corresponds to behaviors that become automatized, Cronbach alpha values were acceptably high for the remaining constructs. Theoretical variables were well correlated with each other and with the dependent variable. The original TAM was good at predicting telemonitoring usage intention, Perceived Usefulness being the only significant predictor (OR: 5.28, 95% CI: 2.12-13.11). The model was still significant and more powerful when the other theoretical variables were added. However, the only significant predictor in the modified model was Facilitators (OR: 4.96, 95% CI: 1.59-15.55). The TAM is a good predictive model of healthcare professionals' intention to use telemonitoring. However, the perception of facilitators is the most important variable to consider for increasing doctors' and nurses' intention to use the new technology.
NASA Technical Reports Server (NTRS)
Frady, Gregory P.; Duvall, Lowery D.; Fulcher, Clay W. G.; Laverde, Bruce T.; Hunt, Ronald A.
2011-01-01
A rich body of vibroacoustic test data was recently generated at Marshall Space Flight Center for a curved orthogrid panel typical of launch vehicle skin structures. Several test article configurations were produced by adding component equipment of differing weights to the flight-like vehicle panel. The test data were used to anchor computational predictions of a variety of spatially distributed responses including acceleration, strain and component interface force. Transfer functions relating the responses to the input pressure field were generated from finite element based modal solutions and test-derived damping estimates. A diffuse acoustic field model was employed to describe the assumed correlation of phased input sound pressures across the energized panel. This application demonstrates the ability to quickly and accurately predict a variety of responses to acoustically energized skin panels with mounted components. Favorable comparisons between the measured and predicted responses were established. The validated models were used to examine vibration response sensitivities to relevant modeling parameters such as pressure patch density, mesh density, weight of the mounted component and model form. Convergence metrics include spectral densities and cumulative root-mean squared (RMS) functions for acceleration, velocity, displacement, strain and interface force. Minimum frequencies for response convergence were established as well as recommendations for modeling techniques, particularly in the early stages of a component design when accurate structural vibration requirements are needed relatively quickly. The results were compared with long-established guidelines for modeling accuracy of component-loaded panels. A theoretical basis for the Response/Pressure Transfer Function (RPTF) approach provides insight into trends observed in the response predictions and confirmed in the test data. The software modules developed for the RPTF method can be easily adapted for quick replacement of the diffuse acoustic field with other pressure field models; for example a turbulent boundary layer (TBL) model suitable for vehicle ascent. Wind tunnel tests have been proposed to anchor the predictions and provide new insight into modeling approaches for this type of environment. Finally, component vibration environments for design were developed from the measured and predicted responses and compared with those derived from traditional techniques such as Barrett scaling methods for unloaded and component-loaded panels.
Pseudoracemic amino acid complexes: blind predictions for flexible two-component crystals.
Görbitz, Carl Henrik; Dalhus, Bjørn; Day, Graeme M
2010-08-14
Ab initio prediction of the crystal packing in complexes between two flexible molecules is a particularly challenging computational chemistry problem. In this work we present results of single crystal structure determinations as well as theoretical predictions for three 1 ratio 1 complexes between hydrophobic l- and d-amino acids (pseudoracemates), known from previous crystallographic work to form structures with one of two alternative hydrogen bonding arrangements. These are accurately reproduced in the theoretical predictions together with a series of patterns that have never been observed experimentally. In this bewildering forest of potential polymorphs, hydrogen bonding arrangements and molecular conformations, the theoretical predictions succeeded, for all three complexes, in finding the correct hydrogen bonding pattern. For two of the complexes, the calculations also reproduce the exact space group and side chain orientations in the best ranked predicted structure. This includes one complex for which the observed crystal packing clearly contradicted previous experience based on experimental data for a substantial number of related amino acid complexes. The results highlight the significant recent advances that have been made in computational methods for crystal structure prediction.
Coward, L. Andrew; Gedeon, Tamas D.
2016-01-01
Theoretical arguments demonstrate that practical considerations, including the needs to limit physiological resources and to learn without interference with prior learning, severely constrain the anatomical architecture of the brain. These arguments identify the hippocampal system as the change manager for the cortex, with the role of selecting the most appropriate locations for cortical receptive field changes at each point in time and driving those changes. This role results in the hippocampal system recording the identities of groups of cortical receptive fields that changed at the same time. These types of records can also be used to reactivate the receptive fields active during individual unique past events, providing mechanisms for episodic memory retrieval. Our theoretical arguments identify the perirhinal cortex as one important focal point both for driving changes and for recording and retrieving episodic memories. The retrieval of episodic memories must not drive unnecessary receptive field changes, and this consideration places strong constraints on neuron properties and connectivity within and between the perirhinal cortex and regular cortex. Hence the model predicts a number of such properties and connectivity. Experimental test of these falsifiable predictions would clarify how change is managed in the cortex and how episodic memories are retrieved. PMID:26819594
Projectile Combustion Effects on Ram Accelerator Performance
NASA Astrophysics Data System (ADS)
Chitale, Saarth Anjali
University of Washington Abstract Projectile Combustion Effects on Ram Accelerator Performance Saarth Anjali Chitale Chair of the Supervisory Committee: Prof. Carl Knowlen William E. Boeing Department of Aeronautics and Astronautics The ram accelerator facility at the University of Washington is used to propel projectiles at supersonic velocities. This concept is similar to an air-breathing ramjet engine in that sub-caliber projectiles, shaped like the ramjet engine center-body, are shot through smooth-bore steel-walled tubes having an internal diameter of 38 mm. The ram accelerator propulsive cycles operate between Mach 2 to 10 and have the potential to accelerate projectile to velocities greater than 8 km/s. The theoretical thrust versus Mach number characteristics can be obtained using knowledge of gas dynamics and thermodynamics that goes into the design of the ram accelerator. The corresponding velocity versus distance profiles obtained from the test runs at the University of Washington, however, are often not consistent with the theoretical predictions after the projectiles reach in-tube Mach numbers greater than 4. The experimental velocities are typically greater than the expected theoretical predictions; which has led to the proposition that the combustion process may be moving up onto the projectile. An alternative explanation for higher than predicted thrust, which is explored here, is that the performance differences can be attributed to the ablation of the projectile body which results in molten metal being added to the flow of the gaseous combustible mixture around the projectile. This molten metal is assumed to mix uniformly and react with the gaseous propellant; thereby enhancing the propellant energy release and altering the predicted thrust-Mach characteristics. This theory predicts at what Mach number the projectile will first experience enhanced thrust and the corresponding velocity-distance profile. Preliminary results are in good agreement with projectiles operating in methane/oxygen/nitrogen propellants. Effects of projectile surface to volume ratio are also explored by applying the model to experimental results from smaller (Tohoku University, 25-mm-bore) and larger (Institute of Saint-Louis 90-mm-bore) bore ram accelerators. Due to lower surface-to-volume ratio, large diameter projectiles are predicted to need to reach higher Mach numbers than smaller diameter projectiles before thrust enhancement due to metal ablation and burning would be experienced. This proposition was supported by published experimental data. The theoretical modeling of projectile ablation, metal combustion, and subsequent ram accelerator thrust characteristics are presented along comparisons to experiments from three different sized ram accelerator facilities.
Skriver, Mette Vinther; Væth, Michael; Støvring, Henrik
2018-01-01
The standardized mortality ratio (SMR) is a widely used measure. A recent methodological study provided an accurate approximate relationship between an SMR and difference in lifetime expectancies. This study examines the usefulness of the theoretical relationship, when comparing historic mortality data in four Scandinavian populations. For Denmark, Finland, Norway and Sweden, data on mortality every fifth year in the period 1950 to 2010 were obtained. Using 1980 as the reference year, SMRs and difference in life expectancy were calculated. The assumptions behind the theoretical relationship were examined graphically. The theoretical relationship predicts a linear association with a slope, [Formula: see text], between log(SMR) and difference in life expectancies, and the theoretical prediction and calculated differences in lifetime expectancies were compared. We examined the linear association both for life expectancy at birth and at age 30. All analyses were done for females, males and the total population. The approximate relationship provided accurate predictions of actual differences in lifetime expectancies. The accuracy of the predictions was better when age was restricted to above 30, and improved if the changes in mortality rate were close to a proportional change. Slopes of the linear relationship were generally around 9 for females and 10 for males. The theoretically derived relationship between SMR and difference in life expectancies provides an accurate prediction for comparing populations with approximately proportional differences in mortality, and was relatively robust. The relationship may provide a useful prediction of differences in lifetime expectancies, which can be more readily communicated and understood.
Monsen, Karen A; Kelechi, Teresa J; McRae, Marion E; Mathiason, Michelle A; Martin, Karen S
The growth and diversification of nursing theory, nursing terminology, and nursing data enable a convergence of theory- and data-driven discovery in the era of big data research. Existing datasets can be viewed through theoretical and terminology perspectives using visualization techniques in order to reveal new patterns and generate hypotheses. The Omaha System is a standardized terminology and metamodel that makes explicit the theoretical perspective of the nursing discipline and enables terminology-theory testing research. The purpose of this paper is to illustrate the approach by exploring a large research dataset consisting of 95 variables (demographics, temperature measures, anthropometrics, and standardized instruments measuring quality of life and self-efficacy) from a theory-based perspective using the Omaha System. Aims were to (a) examine the Omaha System dataset to understand the sample at baseline relative to Omaha System problem terms and outcome measures, (b) examine relationships within the normalized Omaha System dataset at baseline in predicting adherence, and (c) examine relationships within the normalized Omaha System dataset at baseline in predicting incident venous ulcer. Variables from a randomized clinical trial of a cryotherapy intervention for the prevention of venous ulcers were mapped onto Omaha System terms and measures to derive a theoretical framework for the terminology-theory testing study. The original dataset was recoded using the mapping to create an Omaha System dataset, which was then examined using visualization to generate hypotheses. The hypotheses were tested using standard inferential statistics. Logistic regression was used to predict adherence and incident venous ulcer. Findings revealed novel patterns in the psychosocial characteristics of the sample that were discovered to be drivers of both adherence (Mental health Behavior: OR = 1.28, 95% CI [1.02, 1.60]; AUC = .56) and incident venous ulcer (Mental health Behavior: OR = 0.65, 95% CI [0.45, 0.93]; Neuro-musculo-skeletal function Status: OR = 0.69, 95% CI [0.47, 1.00]; male: OR = 3.08, 95% CI [1.15, 8.24]; not married: OR = 2.70, 95% CI [1.00, 7.26]; AUC = .76). The Omaha System was employed as ontology, nursing theory, and terminology to bridge data and theory and may be considered a data-driven theorizing methodology. Novel findings suggest a relationship between psychosocial factors and incident venous ulcer outcomes. There is potential to employ this method in further research, which is needed to generate and test hypotheses from other datasets to extend scientific investigations from existing data.
1993-11-01
SRI International 75 "The Dodecahedral N20 Molecule: Some Theoretical Predictions" Henry F. Schaefer II1, University of Georgia 94 "Theoretical...and P20 Molecules: Some Theoretical Predictions," Henry Schaefer, University of Georgia 2 -2:30 c Investigations of the Structure and Dynamics of...Department of Chemistry APD Cryogenics, Inc. University of California, Berkeley 1833 Vultee Street Berkeley, CA 94708 Allentown, PA 18103 8 Henry F
An experimental investigation of a Mach 3.0 high-speed civil transport at supersonic speeds
NASA Technical Reports Server (NTRS)
Hernandez, Gloria; Covell, Peter F.; Mcgraw, Marvin E., Jr.
1993-01-01
An experimental study was conducted to determine the aerodynamic characteristics of a proposed high speed civil transport. This configuration was designed to cruise at Mach 3.0 and sized to carry 250 passengers for 6500 n.mi. The configuration consists of a highly blended wing body and features a blunt parabolic nose planform, a highly swept inboard wing panel, a moderately swept outboard wing panel, and a curved wingtip. Wind tunnel tests were conducted in the Langley Unitary Plan Wind Tunnel on a 0.0098-scale model. Force, moment, and pressure data were obtained for Mach numbers ranging from 1.6 to 3.6 and at angles of attack ranging from -4 to 10 deg. Extensive flow visualization studies (vapor screen and oil flow) were obtained in the experimental program. Both linear and advanced computational fluid dynamics (CFD) theoretical comparisons are shown to assess the ability to predict forces, moments, and pressures on configurations of this type. In addition, an extrapolation of the wind tunnel data, based on empirical principles, to full-scale conditions is compared with the theoretical aerodynamic predictions.
Study of B c → J/ψV and {B}_{c}^{* } \\rightarrow {\\eta }_{c}V decays within the QCD factorization
NASA Astrophysics Data System (ADS)
Chang, Qin; Chen, Li-Li; Xu, Shuai
2018-07-01
In this paper, we study the non-leptonic B c → J/ψV and {B}c* \\to {η }cV (V=ρ ,{K}* ) weak decays in the framework of QCD factorization. In the evaluation, the form factors are calculated using the Bauer–Stech–Wirbel model and the light-front quark model, respectively. Besides the longitudinal amplitude, the power-suppressed transverse contributions are also evaluated at next-to-leading order. The predictions for the observables of B c → J/ψV and {B}c* \\to {η }cV decays are presented. We find that the NLO QCD contribution presents about 8% correction to the branching ratios, and the longitudinal polarization fractions of these decays are at the level of (80 ∼ 90)%. In addition, we suggest direct measurements on some useful ratios, {R}{K* /ρ }(λ =0) and {\\widetilde{R}}{K* /ρ }(λ =0), which are very suitable to test the consistence between theoretical prediction and data because their theoretical uncertainties can be well controlled.
Load transfer of nanocomposite film on aluminum substrate.
Her, Shiuh-Chuan; Chien, Pao-Chu
2018-01-01
Nanocomposite films have attracted much attention in recent years. Depending on the composition of the film and fabrication method, a large range of applications has been employed for nanocomposite films. In this study, nanocomposite films reinforced with multi-walled carbon nanotubes (MWCNTs) were deposited on the aluminum substrate through hot press processing. A shear lag model and Euler beam theory were employed to evaluate the stress distribution and load carrying capability of the nanocomposite film subjected to tensile load and bending moment. The influence of MWCNT on the Young's modulus and load carrying capability of the nanocomposite film was investigated through a parametric study. The theoretical predictions were verified by comparison with experimental tests. A close agreement with difference less than 6% was achieved between the theoretical prediction and experimental measurements. The Young's modulus and load transfer of the nanocomposite film reinforced with MWCNTs increases with the increase of the MWCNT loading. Compared to the neat epoxy film, nanocomposite film with 1 wt % of MWCNT exhibits an increase of 20% in both the Young's modulus and load carrying capability.
NASA Astrophysics Data System (ADS)
Kopytova, Taisiya G.; Brandner, Wolfgang; Tognelli, Emanuele; Prada Moroni, Pier Giorgio; Da Rio, Nicola; Röser, Siegfried; Schilbach, Elena
2016-01-01
Context. Age and mass determinations for isolated stellar objects remain model-dependent. While stellar interior and atmospheric theoretical models are rapidly evolving, we need a powerful tool to test them. Open clusters are good candidates for this role. Aims: We aim to create a fiducial sequence of stellar objects for testing stellar and atmospheric models. Methods: We complement previous studies on the Hyades multiplicity by Lucky Imaging observations with the AstraLux Norte camera. This allows us to exclude possible binary and multiple systems with companions outside a 2-7 AU separation and to create a single-star sequence for the Hyades. The sequence encompasses 250 main-sequence stars ranging from A5V to M6V. Using the Tool for Astrophysical Data Analysis (TA-DA), we create various theoretical isochrones applying different combinations of interior and atmospheric models. We compare the isochrones with the observed Hyades single-star sequence on J vs. J-Ks, J vs. J-H, and Ks vs. H-Ks color-magnitude diagrams. As a reference we also compute absolute fluxes and magnitudes for all stars from X-ray to mid-infrared based on photometric measurements available in the literature(ROSAT X-ray, GALEX UV, APASS gri, 2MASS JHKs, and WISE W1 to W4). Results: We find that combinations of both PISA and DARTMOUTH stellar interior models with BT-Settl 2010 atmospheric models describe the observed sequence well. We use PISA in combination with BT-Settl 2010 models to derive theoretical predictions for physical parameters (Teff, mass, log g) of 250 single stars in the Hyades. The full sequence covers the mass range of 0.13-2.30 M⊙, and effective temperatures between 3060 K and 8200 K. Conclusions: Within the measurement uncertainties, the current generation of models agree well with the single-star sequence. The primary limitations are the uncertainties in the measurement of the distances to individual Hyades members, and uncertainties in the photometry. Gaia parallaxes, photometry, and spectroscopy will greatly reduce the uncertainties in particular at the lowest mass range, and will enable us to test model predictions with greater confidence. Additionally, a small (~0.05 mag) systematic offset can be noted in J vs. J-K and K vs. H-K diagrams - the observed sequence is shifted to redder colors than the theoretical predictions. Based on observations collected at the Centro Astronómico Hispano Alemán (CAHA) at Calar Alto, operated jointly by the Max-Planck Institut für Astronomie and the Instituto de Astrofísica de Andalucía (CSIC).Full Table 2 is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/585/A7
Vibrational response analysis of tires using a three-dimensional flexible ring-based model
NASA Astrophysics Data System (ADS)
Matsubara, Masami; Tajiri, Daiki; Ise, Tomohiko; Kawamura, Shozo
2017-11-01
Tire vibration characteristics influence noise, vibration, and harshness. Hence, there have been many investigations of the dynamic responses of tires. In this paper, we present new formulations for the prediction of tire tread vibrations below 150 Hz using a three-dimensional flexible ring-based model. The ring represents the tread including the belt, and the springs represent the tire sidewall stiffness. The equations of motion for lateral, longitudinal, and radial vibration on the tread are derived based on the assumption of inextensional deformation. Many of the associated numerical parameters are identified from experimental tests. Unlike most studies of flexible ring models, which mainly discussed radial and circumferential vibration, this study presents steady response functions concerning not only radial and circumferential but also lateral vibration using the three-dimensional flexible ring-based model. The results of impact tests described confirm the theoretical findings. The results show reasonable agreement with the predictions.
Voltage collapse in complex power grids
Simpson-Porco, John W.; Dörfler, Florian; Bullo, Francesco
2016-01-01
A large-scale power grid's ability to transfer energy from producers to consumers is constrained by both the network structure and the nonlinear physics of power flow. Violations of these constraints have been observed to result in voltage collapse blackouts, where nodal voltages slowly decline before precipitously falling. However, methods to test for voltage collapse are dominantly simulation-based, offering little theoretical insight into how grid structure influences stability margins. For a simplified power flow model, here we derive a closed-form condition under which a power network is safe from voltage collapse. The condition combines the complex structure of the network with the reactive power demands of loads to produce a node-by-node measure of grid stress, a prediction of the largest nodal voltage deviation, and an estimate of the distance to collapse. We extensively test our predictions on large-scale systems, highlighting how our condition can be leveraged to increase grid stability margins. PMID:26887284
Radiation protection using Martian surface materials in human exploration of Mars
NASA Technical Reports Server (NTRS)
Kim, M. H.; Thibeault, S. A.; Wilson, J. W.; Heilbronn, L.; Kiefer, R. L.; Weakley, J. A.; Dueber, J. L.; Fogarty, T.; Wilkins, R.
2001-01-01
To develop materials for shielding astronauts from the hazards of GCR, natural Martian surface materials are considered for their potential as radiation shielding for manned Mars missions. The modified radiation fluences behind various kinds of Martian rocks and regolith are determined by solving the Boltzmann equation using NASA Langley's HZETRN code along with the 1977 Solar Minimum galactic cosmic ray environmental model. To develop structural shielding composite materials for Martian surface habitats, theoretical predictions of the shielding properties of Martian regolith/polyimide composites has been computed to assess their shielding effectiveness. Adding high-performance polymer binders to Martian regolith to enhance structural properties also enhances the shielding properties of these composites because of the added hydrogenous constituents. Heavy ion beam testing of regolith simulant/polyimide composites is planned to validate this prediction. Characterization and proton beam tests are performed to measure structural properties and to compare the shielding effects on microelectronic devices, respectively.
Task experience and children’s working memory performance: A perspective from recall timing
Towse, John N.; Cowan, Nelson; Horton, Neil J.; Whytock, Shealagh
2008-01-01
Working memory is an important theoretical construct among children, and measures of its capacity predict a range of cognitive skills and abilities. Data from 9-and 11-year-old children illustrate how a chronometric analysis of recall can complement and elaborate recall accuracy in advancing our understanding of working memory. A reading span task was completed by 130 children, 75 of whom were tested on two occasions, with sequence length either increasing or decreasing during test administration. Substantial pauses occur during participants’ recall sequences and they represent consistent performance traits over time, whilst also varying with recall circumstances and task history. Recall pauses help to predict reading and number skills, alongside as well as separate from levels of recall accuracy. The task demands of working memory change as a function of task experience, with a combination of accuracy and response timing in novel task situations being the strongest predictor of cognitive attainment. PMID:18473637
Considerations Concerning the Development and Testing of In-situ Materials for Martian Exploration
NASA Technical Reports Server (NTRS)
Kim, M.-H. Y.; Heilbronn, L.; Thibeault, S. A.; Simonsen, L. C.; Wilson, J. W.; Chang, K.; Kiefer, R. L.; Maahs, H. G.
2000-01-01
Natural Martian surface materials are evaluated for their potential use as radiation shields for manned Mars missions. The modified radiation fluences behind various kinds of Martian rocks and regolith are determined by solving the Boltzmann equation using NASA Langley s HZETRN code along with the 1977 Solar Minimum galactic cosmic ray environmental model. To make structural shielding composite materials from constituents of the Mars atmosphere and from Martian regolith for Martian surface habitats, schemes for synthesizing polyimide from the Mars atmosphere and for processing Martian regolith/polyimide composites are proposed. Theoretical predictions of the shielding properties of these composites are computed to assess their shielding effectiveness. Adding high-performance polymer binders to Martian regolith to enhance structural properties enhances the shielding properties of these composites because of the added hydrogenous constituents. Laboratory testing of regolith simulant/polyimide composites is planned to validate this prediction.
Bayesian averaging over Decision Tree models for trauma severity scoring.
Schetinin, V; Jakaite, L; Krzanowski, W
2018-01-01
Health care practitioners analyse possible risks of misleading decisions and need to estimate and quantify uncertainty in predictions. We have examined the "gold" standard of screening a patient's conditions for predicting survival probability, based on logistic regression modelling, which is used in trauma care for clinical purposes and quality audit. This methodology is based on theoretical assumptions about data and uncertainties. Models induced within such an approach have exposed a number of problems, providing unexplained fluctuation of predicted survival and low accuracy of estimating uncertainty intervals within which predictions are made. Bayesian method, which in theory is capable of providing accurate predictions and uncertainty estimates, has been adopted in our study using Decision Tree models. Our approach has been tested on a large set of patients registered in the US National Trauma Data Bank and has outperformed the standard method in terms of prediction accuracy, thereby providing practitioners with accurate estimates of the predictive posterior densities of interest that are required for making risk-aware decisions. Copyright © 2017 Elsevier B.V. All rights reserved.
Imaging systems level consolidation of novel associate memories: A longitudinal neuroimaging study
Smith, Jason F; Alexander, Gene E; Chen, Kewei; Husain, Fatima T; Kim, Jieun; Pajor, Nathan; Horwitz, Barry
2010-01-01
Previously, a standard theory of systems level memory consolidation was developed to describe how memory recall becomes independent of the medial temporal memory system. More recently, an extended consolidation theory was proposed that predicts seven changes in regional neural activity and inter-regional functional connectivity. Using longitudinal event related functional magnetic resonance imaging of an associate memory task, we simultaneously tested all predictions and additionally tested for consolidation related changes in recall of associate memories at a sub-trial temporal resolution, analyzing cue, delay and target periods of each trial separately. Results consistent with the theoretical predictions were observed though two inconsistent results were also obtained. In particular, while recall-related delay period activity decreased with consolidation as predicted, visual cue activity increased for consolidated memories. Though the extended theory of memory consolidation is largely supported by our study, these results suggest the extended theory needs further refinement and the medial temporal memory system has multiple, temporally distinct roles in associate memory recall. Neuroimaging analysis at a sub-trial temporal resolution, as used here, may further clarify the role of the hippocampal complex in memory consolidation. PMID:19948227
Data base for the prediction of inlet external drag
NASA Technical Reports Server (NTRS)
Mcmillan, O. J.; Perkins, E. W.; Perkins, S. C., Jr.
1980-01-01
Results are presented from a study to define and evaluate the data base for predicting an airframe/propulsion system interference effect shown to be of considerable importance, inlet external drag. The study is focused on supersonic tactical aircraft with highly integrated jet propulsion systems, although some information is included for supersonic strategic aircraft and for transport aircraft designed for high subsonic or low supersonic cruise. The data base for inlet external drag is considered to consist of the theoretical and empirical prediction methods as well as the experimental data identified in an extensive literature search. The state of the art in the subsonic and transonic speed regimes is evaluated. The experimental data base is organized and presented in a series of tables in which the test article, the quantities measured and the ranges of test conditions covered are described for each set of data; in this way, the breadth of coverage and gaps in the existing experimental data are evident. Prediction methods are categorized by method of solution, type of inlet and speed range to which they apply, major features are given, and their accuracy is assessed by means of comparison to experimental data.
Performance of Oil Pumping Rings: An Analytical and Experimental Study
NASA Technical Reports Server (NTRS)
Eusepi, M. W.; Walowit, J. A.; Pinkus, O.; Holmes, P.
1986-01-01
A steady-state design computer program was developed to predict the performance of pumping rings as functions of geometry, applied loading, speed, ring modulus, and fluid viscosity. Additional analyses were developed to predict transient behavior of the ring and the effects of temperature rises occurring in the hydrodynamic film between the ring and shaft. The analysis was initially compared with previous experimental data and then used to design additional rings for further testing. Tests were performed with Rulon, carbon-graphite, and babbit rings. The design analysis was used to size all of the rings and to select the ranges of clearances, thickness, and loading. Although full quantitative agreement was lacking, relative agreement existed in that rings that were predicted to perform well theoretically, generally performed well experimentally. Some causes for discrepanices between theory and experiment are believed to be due to starvation, leakage past the secondary seal at high pressures, and uncertainties in the small clearances and local inlet temperatures to the pumping ring. A separate preliminary analysis was performed for a pumping Leningrader seal. This anlaysis can be used to predict the film thickness and flow rate thr ough the seal as a function of pressure, speed, loading, and geometry.
Recent advances of nanotechnology in medicine and engineering
NASA Astrophysics Data System (ADS)
Nobile, Lucio; Nobile, Stefano
2016-05-01
The aim of this paper is to give an overview of some advances of nanotechnology in medicine and engineering, exploring typical applications of these emerging technologies. The mechanical properties of such small structures determine their utility and are therefore of considerable interest. Based on nanometer scale tests, a theoretical model to predict the bending strength of a nanobeam is proposed. A fracture approach which takes into account imperfections on the beam surface and crack growth is employed.
Fiber optic pressure sensors in skin-friction measurements
NASA Technical Reports Server (NTRS)
Cuomo, F. W.
1986-01-01
A fiber optic lever sensing technique that can be used to measure normal pressure as well as shear stresses is discussed. This method uses three unequal fibers combining small size and good sensitivity. Static measurements appear to confirm the theoretical models predicted by geometrical optics and dynamic tests performed at frequencies up to 10 kHz indicate a flat response within this frequency range. These sensors are intended for use in a low speed wind tunnel environment.
Temporal nonlocality in bistable perception
NASA Astrophysics Data System (ADS)
Atmanspacher, Harald; Filk, Thomas
2012-12-01
A novel conceptual framework for theoretical psychology is presented and illustrated for the example of bistable perception. A basic formal feature of this framework is the non-commutativity of operations acting on mental states. A corresponding model for the bistable perception of ambiguous stimuli, the Necker-Zeno model, is sketched and some empirical evidence for it so far is described. It is discussed how a temporal nonlocality of mental states, predicted by the model, can be understood and tested.
NASA Technical Reports Server (NTRS)
Youngquist, Robert C.; Nurge, Mark A.
2015-01-01
Under our NASA Innovative Advanced Concepts (NIAC) project we have theoretically demonstrated a novel selective surface that reflects roughly 100 times more solar radiation than any other known coating. If this prediction holds up under experimental tests it will allow cryogenic temperatures to be reached in deep space even in the presence of the sun. It may allow LOX to be carried to the Moon and Mars. It may allow superconductors to be used in deep space without a refrigeration system.
Recent advances of nanotechnology in medicine and engineering
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nobile, Lucio; Nobile, Stefano
The aim of this paper is to give an overview of some advances of nanotechnology in medicine and engineering, exploring typical applications of these emerging technologies. The mechanical properties of such small structures determine their utility and are therefore of considerable interest. Based on nanometer scale tests, a theoretical model to predict the bending strength of a nanobeam is proposed. A fracture approach which takes into account imperfections on the beam surface and crack growth is employed.
Basic research on radiant burners. Semi-annual report, through July 1991
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sullivan, J.D.
1991-10-01
Basic performance characteristics of radiant burners are explored in the broad-based study combining theoretical modeling and experimental validation of predictions. The work included fabrication of catalyzed substrates and fibers; incorporation of the catalysts into burners; testing of catalysts; and investigation of new catalyst sources. The progress of the study is detailed and further plans are outlined. A report on the preparation of palladium catalysts by Andre Blaise Kooh is included in the appendix.
An assessment of the accuracy of orthotropic photoelasticity
NASA Technical Reports Server (NTRS)
Hyer, M. W.; Liu, D. H.
1984-01-01
The accuracy of orthotropic photoelasticity was studied. The study consisted of both theoretical and experimental phases. In the theoretical phase a stress-optic law was developed. The stress-optic law included the effects of residual birefringence in the relation between applied stress and the material's optical response. The experimental phase had several portions. First, it was shown that four-point bending tests and the concept of an optical neutral axis could be conveniently used to calibrate the stress-optic behavior of the material. Second, the actual optical response of an orthotropic disk in diametral compression was compared with theoretical predictions. Third, the stresses in the disk were determined from the observed optical response, the stress-optic law, and a finite-difference form of the plane stress equilibrium equations. It was concluded that orthotropic photoelasticity is not as accurate as isotropic photoelasticity. This is believed to be due to the lack of good fringe resolution and the low sensitivity of most orthotropic photoelastic materials.
Testing neoclassical and turbulent effects on poloidal rotation in the core of DIII-D
Chrystal, Colin; Burrell, Keith H.; Grierson, Brian A.; ...
2014-07-09
Experimental tests of ion poloidal rotation theories have been performed on DIII-D using a novel impurity poloidal rotation diagnostic. These tests show significant disagreements with theoretical predictions in various conditions, including L-mode plasmas with internal transport barriers (ITB), H-mode plasmas, and QH-mode plasmas. The theories tested include standard neoclassical theory, turbulence driven Reynolds stress, and fast-ion friction on the thermal ions. Poloidal rotation is observed to spin up at the formation of an ITB and makes a significant contribution to the measurement of themore » $$\\vec{E}$$ × $$\\vec{B}$$ shear that forms the ITB. In ITB cases, neoclassical theory agrees quantitatively with the experimental measurements only in the steep gradient region. Significant quantitative disagreement with neoclassical predictions is seen in the cores of ITB, QH-, and H-mode plasmas, demonstrating that neoclassical theory is an incomplete description of poloidal rotation. The addition of turbulence driven Reynolds stress does not remedy this disagreement; linear stability calculations and Doppler backscattering measurements show that disagreement increases as turbulence levels decline. Furthermore, the effect of fast-ion friction, by itself, does not lead to improved agreement; in QH-mode plasmas, neoclassical predictions are closest to experimental results in plasmas with the largest fast ion friction. Finally, predictions from a new model that combines all three effects show somewhat better agreement in the H-mode case, but discrepancies well outside the experimental error bars remain.« less
QED test and nuclear radius determination of helium atom by laser spectroscopy
NASA Astrophysics Data System (ADS)
Pavone, F. S.
1995-01-01
The 23S1-33P0 4He transition at λ = 389 nm is measured with respect to a previously frequency calibrated 87Rb two-photon transition at 2λ = 778 nm. The 4He absolute frequency is 770 732 839 058 (190) kHz, with an accuracy of 2.4 parts in 1010. A Lamb shift value of + 4057.61 (79) MHz, with 600 kHz uncertainty arising from the theoretical position of the 33P0 energy level, is extracted for the 23S1. This value is more than two orders of magnitude more accurate than the current best theoretical predictions. By means of a novel heterodyne spectrometer using only one laser tuned at the atomic frequency, we have measured for the first time the 3He-4He isotope separation for the 23S1-33P0 transition at 389 nm. Our experimental result of 45 394 425 (140) kHz, for the F = 1/2-1/2 3He component, is compared with the theoretical prediction which has similar accuracy and depends also on the rms nuclear radius of 3He. For this we determine a preliminary value of 1.923 (37) fm which shows a slight discrepancy with previous values obtained by extrapolation to zero momentum transfer from high energy scattering measurements.
Experimental Studies of Dynamic Fault Weakening Due to Thermal Pressurization of Pore Fluids
NASA Astrophysics Data System (ADS)
Goldsby, David; Tullis, Terry; Platt, John; Okazaki, Keishi
2016-04-01
High-velocity friction experiments and geophysical observations suggest that mature faults weaken dramatically during seismic slip. However, while many coseismic weakening mechanisms have been proposed, it is still unclear which mechanisms are most important or how the efficiency of weakening varies within the seismogenic zone. Thermal pressurization is one possible coseismic weakening mechanism driven by the thermal expansion of native pore fluids, which leads to elevated pore pressures and significant coseismic weakening. While thermal pressurization has been studied theoretically for many decades, and invoked in recent earthquake simulations, its activation in laboratory experiments has remained elusive. Several high-speed friction studies have yielded indirect evidence for thermal pressurization, yet none has directly linked with existing theoretical models or the relevant physical parameters, such as permeability, slip, and slip rate, that control the weakening rate. To fill this gap, we are conducting thermal pressurization experiments on fluid-saturated, low-permeability rocks (Frederick diabase) at slip rates up to ~5 mm/s, at constant confining pressures in the range 21-149 MPa and initial imposed pore pressures in the range 10-25 MPa. The impractically low permeability of the as-is diabase, ~10-23 m2, is increased prior to the test by thermal cracking, yielding measured permeabilities in the range 1.3*10-18 to 6.1*10-19 m2. These values of permeability are high enough to allow sample saturation over one to several days, but low enough to confine the elevated pore pressures generated by frictional heating during rapid sliding. Our experiments reveal a rapid decay of shear stress following a step-change in velocity from 10 μm/s to 4.8 mm/s. In one test, the decrease in shear stress of ~25% over the first 28 mm of slip at 4.8 mm/s agrees closely with the theoretical solution for slip on a plane (Rice [2006]), with an inferred slip-weakening distance of ~500 mm, which is in the range predicted by inserting laboratory-determined rock and fluid properties into the formula for L* from Rice [2006]. In another test, steps from 10 μm/s to three different velocities (1.2 mm/s, 2.4 mm/s, and 4.8 mm/s) all fit the Rice solution with values of L* that varied systematically with velocity as predicted by the theory. Deviations from the theoretical prediction occur at displacements larger than 28 mm, since the experimental sample is not a semi-infinite half space, as assumed in the models, and heat is lost to the high-conductivity steel of the sample assembly. To our knowledge, this is the best experimental validation of thermal pressurization to date.
From the Cover: The growth of business firms: Theoretical framework and empirical evidence
NASA Astrophysics Data System (ADS)
Fu, Dongfeng; Pammolli, Fabio; Buldyrev, S. V.; Riccaboni, Massimo; Matia, Kaushik; Yamasaki, Kazuko; Stanley, H. Eugene
2005-12-01
We introduce a model of proportional growth to explain the distribution Pg(g) of business-firm growth rates. The model predicts that Pg(g) is exponential in the central part and depicts an asymptotic power-law behavior in the tails with an exponent = 3. Because of data limitations, previous studies in this field have been focusing exclusively on the Laplace shape of the body of the distribution. In this article, we test the model at different levels of aggregation in the economy, from products to firms to countries, and we find that the predictions of the model agree with empirical growth distributions and size-variance relationships. proportional growth | preferential attachment | Laplace distribution
Array Simulations Platform (ASP) predicts NASA Data Link Module (NDLM) performance
NASA Technical Reports Server (NTRS)
Snook, Allen David
1993-01-01
Through a variety of imbedded theoretical and actual antenna patterns, the array simulation platform (ASP) enhanced analysis of the array antenna pattern effects for the KTx (Ku-Band Transmit) service of the NDLM (NASA Data Link Module). The ASP utilizes internally stored models of the NDLM antennas and can develop the overall pattern of antenna arrays through common array calculation techniques. ASP expertly assisted in the diagnosing of element phase shifter errors during KTx testing and was able to accurately predict the overall array pattern from combinations of the four internally held element patterns. This paper provides an overview of the use of the ASP software in the solving of array mis-phasing problems.
Practical application of computer programs for supersonic combustion
NASA Technical Reports Server (NTRS)
Groves, F. R., Jr.
1972-01-01
Experimental data were interpreted using two supersonic combustion computer programs. The P1 program is based on a conventional boundary layer treatment of the mixing of concentric gas streams and complete combustion chemistry. The H1 program is based on a modified boundary layer approach which accounts for radial pressure gradients in the flow and also incorporates a finite rate chemistry calculation. The objective of the investigation was to compare the experimental data with theoretical predictions of the two programs with special emphasis on the prediction of radial pressure gradients by the H1 program. A test of the H1 program was also desired through comparison with the experimental data and with the P1 program.
Discharge coefficient correlations for circular-arc venturi flowmeters at critical /sonic/ flow
NASA Technical Reports Server (NTRS)
Arnberg, B. T.; Britton, C. L.; Seidl, W. F.
1973-01-01
Experimental data are analyzed to support theoretical predictions for discharge coefficients in circular-arc venturi flow meters operating in the critical sonic flow regime at throat Reynolds numbers above 150 thousand. The data tend to verify the predicted 0.25% decrease in the discharge coefficient during transition from a laminar to turbulent boundary layer. Four different test gases and three flow measurement facilities were used in the experiments with 17 venturis with throat sizes from 0.15 to 1.37 in. and Beta ratios ranging from 0.014 to 0.25. Recommendations are given as to how the effectiveness of future studies in the field could be improved.
Metabolic biotransformation half-lives in fish: QSAR modeling and consensus analysis.
Papa, Ester; van der Wal, Leon; Arnot, Jon A; Gramatica, Paola
2014-02-01
Bioaccumulation in fish is a function of competing rates of chemical uptake and elimination. For hydrophobic organic chemicals bioconcentration, bioaccumulation and biomagnification potential are high and the biotransformation rate constant is a key parameter. Few measured biotransformation rate constant data are available compared to the number of chemicals that are being evaluated for bioaccumulation hazard and for exposure and risk assessment. Three new Quantitative Structure-Activity Relationships (QSARs) for predicting whole body biotransformation half-lives (HLN) in fish were developed and validated using theoretical molecular descriptors that seek to capture structural characteristics of the whole molecule and three data set splitting schemes. The new QSARs were developed using a minimal number of theoretical descriptors (n=9) and compared to existing QSARs developed using fragment contribution methods that include up to 59 descriptors. The predictive statistics of the models are similar thus further corroborating the predictive performance of the different QSARs; Q(2)ext ranges from 0.75 to 0.77, CCCext ranges from 0.86 to 0.87, RMSE in prediction ranges from 0.56 to 0.58. The new QSARs provide additional mechanistic insights into the biotransformation capacity of organic chemicals in fish by including whole molecule descriptors and they also include information on the domain of applicability for the chemical of interest. Advantages of consensus modeling for improving overall prediction and minimizing false negative errors in chemical screening assessments, for identifying potential sources of residual error in the empirical HLN database, and for identifying structural features that are not well represented in the HLN dataset to prioritize future testing needs are illustrated. © 2013.
Finnerty, Niall J; O'Riordan, Saidhbhe L; Lowry, John P; Cloutier, Mathieu; Wellstead, Peter
2013-01-01
Mathematical models of the interactions between alphasynuclein (αS) and reactive oxygen species (ROS) predict a systematic and irreversible switching to damagingly high levels of ROS after sufficient exposure to risk factors associated with Parkinson's disease (PD). We tested this prediction by continuously monitoring real-time changes in neurochemical levels over periods of several days in animals exposed to a toxin known to cause Parkinsonian symptoms. Nitric oxide (NO) sensors were implanted in the brains of freely moving rats and the NO levels continuously recorded while the animals were exposed to paraquat (PQ) injections of various amounts and frequencies. Long-term, real-time measurement of NO in a cohort of animals showed systematic switching in levels when PQ injections of sufficient size and frequency were administered. The experimental observations of changes in NO imply a corresponding switching in endogenous ROS levels and support theoretical predictions of an irreversible change to damagingly high levels of endogenous ROS when PD risks are sufficiently large. Our current results only consider one form of PD risk, however, we are sufficiently confident in them to conclude that: (i) continuous long-term measurement of neurochemical dynamics provide a novel way to measure the temporal change and system dynamics which determine Parkinsonian damage, and (ii) the bistable feedback switching predicted by mathematical modelling seems to exist and that a deeper analysis of its characteristics would provide a way of understanding the pathogenic mechanisms that initiate Parkinsonian cell damage.
NASA Technical Reports Server (NTRS)
Weir, Donald S.; Jumper, Stephen J.; Burley, Casey L.; Golub, Robert A.
1995-01-01
This document describes the theoretical methods used in the rotorcraft noise prediction system (ROTONET), which is a part of the NASA Aircraft Noise Prediction Program (ANOPP). The ANOPP code consists of an executive, database manager, and prediction modules for jet engine, propeller, and rotor noise. The ROTONET subsystem contains modules for the prediction of rotor airloads and performance with momentum theory and prescribed wake aerodynamics, rotor tone noise with compact chordwise and full-surface solutions to the Ffowcs-Williams-Hawkings equations, semiempirical airfoil broadband noise, and turbulence ingestion broadband noise. Flight dynamics, atmosphere propagation, and noise metric calculations are covered in NASA TM-83199, Parts 1, 2, and 3.
Reproductive control via eviction (but not the threat of eviction) in banded mongooses
Cant, Michael A.; Hodge, Sarah J.; Bell, Matthew B. V.; Gilchrist, Jason S.; Nichols, Hazel J.
2010-01-01
Considerable research has focused on understanding variation in reproductive skew in cooperative animal societies, but the pace of theoretical development has far outstripped empirical testing of the models. One major class of model suggests that dominant individuals can use the threat of eviction to deter subordinate reproduction (the ‘restraint’ model), but this idea remains untested. Here, we use long-term behavioural and genetic data to test the assumptions of the restraint model in banded mongooses (Mungos mungo), a species in which subordinates breed regularly and evictions are common. We found that dominant females suffer reproductive costs when subordinates breed, and respond to these costs by evicting breeding subordinates from the group en masse, in agreement with the assumptions of the model. We found no evidence, however, that subordinate females exercise reproductive restraint to avoid being evicted in the first place. This means that the pattern of reproduction is not the result of a reproductive ‘transaction’ to avert the threat of eviction. We present a simple game theoretical analysis that suggests that eviction threats may often be ineffective to induce pre-emptive restraint among multiple subordinates and predicts that threats of eviction (or departure) will be much more effective in dyadic relationships and linear hierarchies. Transactional models may be more applicable to these systems. Greater focus on testing the assumptions rather than predictions of skew models can lead to a better understanding of how animals control each other's reproduction, and the extent to which behaviour is shaped by overt acts versus hidden threats. PMID:20236979
NASA Technical Reports Server (NTRS)
Chen, R. T. N.; Hindson, W. S.
1985-01-01
The increasing use of highly augmented digital flight-control systems in modern military helicopters prompted an examination of the influence of rotor dynamics and other high-order dynamics on control-system performance. A study was conducted at NASA Ames Research Center to correlate theoretical predictions of feedback gain limits in the roll axis with experimental test data obtained from a variable-stability research helicopter. Feedback gains, the break frequency of the presampling sensor filter, and the computational frame time of the flight computer were systematically varied. The results, which showed excellent theoretical and experimental correlation, indicate that the rotor-dynamics, sensor-filter, and digital-data processing delays can severely limit the usable values of the roll-rate and roll-attitude feedback gains.
Effect of wear of bearing surfaces on elastohydrodynamic lubrication of metal-on-metal hip implants.
Liu, F; Jin, Z M; Hirt, F; Rieker, C; Roberts, P; Grigoris, P
2005-09-01
The effect of geometry change of the bearing surfaces owing to wear on the elastohydrodynamic lubrication (EHL) of metal-on-metal (MOM) hip bearings has been investigated theoretically in the present study. A particular MOM Metasul bearing (Zimmer GmbH) was considered, and was tested in a hip simulator using diluted bovine serum. The geometry of the worn bearing surface was measured using a coordinate measuring machine (CMM) and was modelled theoretically on the assumption of spherical geometries determined from the maximum linear wear depth and the angle of the worn region. Both the CMM measurement and the theoretical calculation were directly incorporated into the elastohydrodynamic lubrication analysis. It was found that the geometry of the original machined bearing surfaces, particularly of the femoral head with its out-of-roundness, could lead to a large reduction in the predicted lubricant film thickness and an increase in pressure. However, these non-spherical deviations can be expected to be smoothed out quickly during the initial running-in period. For a given worn bearing surface, the predicted lubricant film thickness and pressure distribution, based on CMM measurement, were found to be in good overall agreement with those obtained with the theoretical model based on the maximum linear wear depth and the angle of the worn region. The gradual increase in linear wear during the running-in period resulted in an improvement in the conformity and consequently an increase in the predicted lubricant film thickness and a decrease in the pressure. For the Metasul bearing tested in an AMTI hip simulator, a maximum total linear wear depth of approximately 13 microm was measured after 1 million cycles and remained unchanged up to 5 million cycles. This resulted in a threefold increase in the predicted average lubricant film thickness. Consequently, it was possible for the Metasul bearing to achieve a fluid film lubrication regime during this period, and this was consistent with the minimal wear observed between 1 and 5 million cycles. However, under adverse in vivo conditions associated with start-up and stopping and depleted lubrication, wear of the bearing surfaces can still occur. An increase in the wear depth beyond a certain limit was shown to lead to the constriction of the lubricant film around the edge of the contact conjunction and consequently to a decrease in the lubricant film thickness. Continuous cycles of a running-in wear period followed by a steady state wear period may be inevitable in MOM hip implants. This highlights the importance of minimizing the wear in these devices during the initial running-in period, particularly from design and manufacturing points of view.
NASA Astrophysics Data System (ADS)
Shen, Fuhui; Lian, Junhe; Münstermann, Sebastian
2018-05-01
Experimental and numerical investigations on the forming limit diagram (FLD) of a ferritic stainless steel were performed in this study. The FLD of this material was obtained by Nakajima tests. Both the Marciniak-Kuczynski (MK) model and the modified maximum force criterion (MMFC) were used for the theoretical prediction of the FLD. From the results of uniaxial tensile tests along different loading directions with respect to the rolling direction, strong anisotropic plastic behaviour was observed in the investigated steel. A recently proposed anisotropic evolving non-associated Hill48 (enHill48) plasticity model, which was developed from the conventional Hill48 model based on the non-associated flow rule with evolving anisotropic parameters, was adopted to describe the anisotropic hardening behaviour of the investigated material. In the previous study, the model was coupled with the MMFC for FLD prediction. In the current study, the enHill48 was further coupled with the MK model. By comparing the predicted forming limit curves with the experimental results, the influences of anisotropy in terms of flow rule and evolving features on the forming limit prediction were revealed and analysed. In addition, the forming limit predictive performances of the MK and the MMFC models in conjunction with the enHill48 plasticity model were compared and evaluated.
Strain localization and elastic-plastic coupling during deformation of porous sandstone
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dewers, Thomas A.; Issen, Kathleen A.; Holcomb, David J.
Results of axisymmetric compression tests on weak, porous Castlegate Sandstone (Cretaceous, Utah, USA), covering a range of dilational and compactional behaviors, are examined for localization behavior. Assuming isotropy, bulk and shear moduli evolve as increasing functions of mean stress and Mises equivalent shear stress respectively, and as decreasing functions of work-conjugate plastic strains. Acoustic emissions events located during testing show onset of localization and permit calculation of observed shear and low-angle compaction localization zones, or bands, as localization commences. Total strain measured experimentally partitions into: A) elastic strain with constant moduli, B) elastic strain due to stress dependence of moduli,more » C) elastic strain due to moduli degradation with increasing plastic strain, and D) plastic strain. The third term is the elastic-plastic coupling strain, and though often ignored, contributes significantly to pre-failure total strain for brittle and transitional tests. Constitutive parameters and localization predictions derived from experiments are compared to theoretical predictions. In the brittle regime, predictions of band angles (angle between band normal and maximum compression) demonstrate good agreement with observed shear band angles. Compaction localization was observed in the transitional regime in between shear localization and spatially pervasive compaction, over a small range of mean stresses. In contrast with predictions however, detailed acoustic emissions analyses in this regime show low angle, compaction-dominated but shear-enhanced, localization.« less
Kinetic rate constant prediction supports the conformational selection mechanism of protein binding.
Moal, Iain H; Bates, Paul A
2012-01-01
The prediction of protein-protein kinetic rate constants provides a fundamental test of our understanding of molecular recognition, and will play an important role in the modeling of complex biological systems. In this paper, a feature selection and regression algorithm is applied to mine a large set of molecular descriptors and construct simple models for association and dissociation rate constants using empirical data. Using separate test data for validation, the predicted rate constants can be combined to calculate binding affinity with accuracy matching that of state of the art empirical free energy functions. The models show that the rate of association is linearly related to the proportion of unbound proteins in the bound conformational ensemble relative to the unbound conformational ensemble, indicating that the binding partners must adopt a geometry near to that of the bound prior to binding. Mirroring the conformational selection and population shift mechanism of protein binding, the models provide a strong separate line of evidence for the preponderance of this mechanism in protein-protein binding, complementing structural and theoretical studies.
Feeling global, acting ethically: global identification and fairtrade consumption.
Reese, Gerhard; Kohlmann, Fabienne
2015-01-01
Global identification has become a popular construct in recent psychological debate as it relates to harmonious intergroup relations and a caring for all humanity. Based on social identity theorizing, the current research tests whether global identification can also predict consumer choices, at the expense of lower personal benefit. Importantly, we assumed that concerns about global injustice represent a crucial component of that relation. We predicted that participants who identified strongly with all humanity would rather choose a Fairtrade product alternative over a conventional one, compared with low identifiers. In addition, we assumed that this effect be mediated by perceived global injustice. Both predictions were confirmed in a consumer choice study (N = 68). Overall, global identification and globally relevant consumer behavior seem meaningfully interconnected, and we discuss these findings with regard to recent theoretical developments in Fairtrade consumption research.
Thoresen, Carl J; Bradley, Jill C; Bliese, Paul D; Thoresen, Joseph D
2004-10-01
This study extends the literature on personality and job performance through the use of random coefficient modeling to test the validity of the Big Five personality traits in predicting overall sales performance and sales performance trajectories--or systematic patterns of performance growth--in 2 samples of pharmaceutical sales representatives at maintenance and transitional job stages (K. R. Murphy, 1989). In the maintenance sample, conscientiousness and extraversion were positively associated with between-person differences in total sales, whereas only conscientiousness predicted performance growth. In the transitional sample, agreeableness and openness to experience predicted overall performance differences and performance trends. All effects remained significant with job tenure statistically controlled. Possible explanations for these findings are offered, and theoretical and practical implications of findings are discussed. (c) 2004 APA, all rights reserved
Comparisons of patch-use models for wintering American tree sparrows
Tome, M.W.
1990-01-01
Optimal foraging theory has stimulated numerous theoretical and empirical studies of foraging behavior for >20 years. These models provide a valuable tool for studying the foraging behavior of an organism. As with any other tool, the models are most effective when properly used. For example, to obtain a robust test of a foraging model, Stephens and Krebs (1986) recommend experimental designs in which four questions are answered in the affirmative. First, do the foragers play the same "game" as the model? Sec- ond, are the assumptions of the model met? Third, does the test rule out alternative possibilities? Finally, are the appropriate variables measured? Negative an- swers to any of these questions could invalidate the model and lead to confusion over the usefulness of foraging theory in conducting ecological studies. Gaines (1989) attempted to determine whether American Tree Sparrows (Spizella arborea) foraged by a time (Krebs 1973) or number expectation rule (Gibb 1962), or in a manner consistent with the predictions of Charnov's (1976) marginal value theorem (MVT). Gaines (1989: 118) noted appropriately that field tests of foraging models frequently involve uncontrollable circumstances; thus, it is often difficult to meet the assumptions of the models. Gaines also states (1989: 118) that "violations of the assumptions are also in- formative but do not constitute robust tests of predicted hypotheses," and that "the problem can be avoided by experimental analyses which concurrently test mutually exclusive hypotheses so that alter- native predictions will be eliminated if falsified." There is a problem with this approach because, when major assumptions of models are not satisfied, it is not justifiable to compare a predator's foraging behavior with the model's predictions. I submit that failing to follow the advice offered by Stephens and Krebs (1986) can invalidate tests of foraging models.
Multiple scattering theory for total skin electron beam design.
Antolak, J A; Hogstrom, K R
1998-06-01
The purpose of this manuscript is to describe a method for designing a broad beam of electrons suitable for total skin electron irradiation (TSEI). A theoretical model of a TSEI beam from a linear accelerator with a dual scattering system has been developed. The model uses Fermi-Eyges theory to predict the planar fluence of the electron beam after it has passed through various materials between the source and the treatment plane, which includes scattering foils, monitor chamber, air, and a plastic diffusing plate. Unique to this model is its accounting for removal of the tails of the electron beam profile as it passes through the primary x-ray jaws. A method for calculating the planar fluence profile for an obliquely incident beam is also described. Off-axis beam profiles and percentage depth doses are measured with ion chambers, film, and thermoluminescent dosimeters (TLD). The measured data show that the theoretical model can accurately predict beam energy and planar fluence of the electron beam at normal and oblique incidence. The agreement at oblique angles is not quite as good but is sufficiently accurate to be of predictive value when deciding on the optimal angles for the clinical TSEI beams. The advantage of our calculational approach for designing a TSEI beam is that many different beam configurations can be tested without having to perform time-consuming measurements. Suboptimal configurations can be quickly dismissed, and the predicted optimal solution should be very close to satisfying the clinical specifications.
Using Machine Learning in Adversarial Environments.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Warren Leon Davis
Intrusion/anomaly detection systems are among the first lines of cyber defense. Commonly, they either use signatures or machine learning (ML) to identify threats, but fail to account for sophisticated attackers trying to circumvent them. We propose to embed machine learning within a game theoretic framework that performs adversarial modeling, develops methods for optimizing operational response based on ML, and integrates the resulting optimization codebase into the existing ML infrastructure developed by the Hybrid LDRD. Our approach addresses three key shortcomings of ML in adversarial settings: 1) resulting classifiers are typically deterministic and, therefore, easy to reverse engineer; 2) ML approachesmore » only address the prediction problem, but do not prescribe how one should operationalize predictions, nor account for operational costs and constraints; and 3) ML approaches do not model attackers’ response and can be circumvented by sophisticated adversaries. The principal novelty of our approach is to construct an optimization framework that blends ML, operational considerations, and a model predicting attackers reaction, with the goal of computing optimal moving target defense. One important challenge is to construct a realistic model of an adversary that is tractable, yet realistic. We aim to advance the science of attacker modeling by considering game-theoretic methods, and by engaging experimental subjects with red teaming experience in trying to actively circumvent an intrusion detection system, and learning a predictive model of such circumvention activities. In addition, we will generate metrics to test that a particular model of an adversary is consistent with available data.« less
Fear and Loving in Las Vegas: Evolution, Emotion, and Persuasion
Griskevicius, Vladas; Goldstein, Noah J.; Mortensen, Chad R.; Sundie, Jill M.; Cialdini, Robert B.; Kenrick, Douglas T.
2009-01-01
How do arousal-inducing contexts, such as frightening or romantic television programs, influence the effectiveness of basic persuasion heuristics? Different predictions are made by three theoretical models: A general arousal model predicts that arousal should increase effectiveness of heuristics; an affective valence model predicts that effectiveness should depend on whether the context elicits positive or negative affect; an evolutionary model predicts that persuasiveness should depend on both the specific emotion that is elicited and the content of the particular heuristic. Three experiments examined how fear-inducing versus romantic contexts influenced the effectiveness of two widely used heuristics—social proof (e.g., “most popular”) and scarcity (e.g., “limited edition”). Results supported predictions from an evolutionary model, showing that fear can lead scarcity appeals to be counter-persuasive, and that romantic desire can lead social proof appeals to be counter-persuasive. The findings highlight how an evolutionary theoretical approach can lead to novel theoretical and practical marketing insights. PMID:19727416
Application of a single-fluid model for the steam condensing flow prediction
NASA Astrophysics Data System (ADS)
Smołka, K.; Dykas, S.; Majkut, M.; Strozik, M.
2016-10-01
One of the results of many years of research conducted in the Institute of Power Engineering and Turbomachinery of the Silesian University of Technology are computational algorithms for modelling steam flows with a non-equilibrium condensation process. In parallel with theoretical and numerical research, works were also started on experimental testing of the steam condensing flow. This paper presents a comparison of calculations of a flow field modelled by means of a single-fluid model using both an in-house CFD code and the commercial Ansys CFX v16.2 software package. The calculation results are compared to inhouse experimental testing.
NASA Technical Reports Server (NTRS)
Frady, Gregory P.; Duvall, Lowery D.; Fulcher, Clay W. G.; Laverde, Bruce T.; Hunt, Ronald A.
2011-01-01
rich body of vibroacoustic test data was recently generated at Marshall Space Flight Center for component-loaded curved orthogrid panels typical of launch vehicle skin structures. The test data were used to anchor computational predictions of a variety of spatially distributed responses including acceleration, strain and component interface force. Transfer functions relating the responses to the input pressure field were generated from finite element based modal solutions and test-derived damping estimates. A diffuse acoustic field model was applied to correlate the measured input sound pressures across the energized panel. This application quantifies the ability to quickly and accurately predict a variety of responses to acoustically energized skin panels with mounted components. Favorable comparisons between the measured and predicted responses were established. The validated models were used to examine vibration response sensitivities to relevant modeling parameters such as pressure patch density, mesh density, weight of the mounted component and model form. Convergence metrics include spectral densities and cumulative root-mean squared (RMS) functions for acceleration, velocity, displacement, strain and interface force. Minimum frequencies for response convergence were established as well as recommendations for modeling techniques, particularly in the early stages of a component design when accurate structural vibration requirements are needed relatively quickly. The results were compared with long-established guidelines for modeling accuracy of component-loaded panels. A theoretical basis for the Response/Pressure Transfer Function (RPTF) approach provides insight into trends observed in the response predictions and confirmed in the test data. The software developed for the RPTF method allows easy replacement of the diffuse acoustic field with other pressure fields such as a turbulent boundary layer (TBL) model suitable for vehicle ascent. Structural responses using a TBL model were demonstrated, and wind tunnel tests have been proposed to anchor the predictions and provide new insight into modeling approaches for this environment. Finally, design load factors were developed from the measured and predicted responses and compared with those derived from traditional techniques such as historical Mass Acceleration Curves and Barrett scaling methods for acreage and component-loaded panels.
NASA Astrophysics Data System (ADS)
Del Rio Amador, Lenin; Lovejoy, Shaun
2017-04-01
Over the past ten years, a key advance in our understanding of atmospheric variability is the discovery that between the weather and climate regime lies an intermediate "macroweather" regime, spanning the range of scales from ≈10 days to ≈30 years. Macroweather statistics are characterized by two fundamental symmetries: scaling and the factorization of the joint space-time statistics. In the time domain, the scaling has low intermittency with the additional property that successive fluctuations tend to cancel. In space, on the contrary the scaling has high (multifractal) intermittency corresponding to the existence of different climate zones. These properties have fundamental implications for macroweather forecasting: a) the temporal scaling implies that the system has a long range memory that can be exploited for forecasting; b) the low temporal intermittency implies that mathematically well-established (Gaussian) forecasting techniques can be used; and c), the statistical factorization property implies that although spatial correlations (including teleconnections) may be large, if long enough time series are available, they are not necessarily useful in improving forecasts. Theoretically, these conditions imply the existence of stochastic predictability limits in our talk, we show that these limits apply to GCM's. Based on these statistical implications, we developed the Stochastic Seasonal and Interannual Prediction System (StocSIPS) for the prediction of temperature from regional to global scales and from one month to many years horizons. One of the main components of StocSIPS is the separation and prediction of both the internal and externally forced variabilities. In order to test the theoretical assumptions and consequences for predictability and predictions, we use 41 different CMIP5 model outputs from preindustrial control runs that have fixed external forcings: whose variability is purely internally generated. We first show that these statistical assumptions hold with relatively good accuracy and then we performed hindcasts at global and regional scales from monthly to annual time resolutions using StocSIPS. We obtained excellent agreement between the hindcast Mean Square Skill Score (MSSS) and the theoretical stochastic limits. We also show the application of StocSIPS to the prediction of average global temperature and compare our results with those obtained using multi-model ensemble approaches. StocSIPS has numerous advantages including a) higher MSSS for large time horizons, b) the from convergence to the real - not model - climate, c) much higher computational speed, d) no need for data assimilation, e) no ad hoc post processing and f) no need for downscaling.
Predicting Child Abuse Potential: An Empirical Investigation of Two Theoretical Frameworks
ERIC Educational Resources Information Center
Begle, Angela Moreland; Dumas, Jean E.; Hanson, Rochelle F.
2010-01-01
This study investigated two theoretical risk models predicting child maltreatment potential: (a) Belsky's (1993) developmental-ecological model and (b) the cumulative risk model in a sample of 610 caregivers (49% African American, 46% European American; 53% single) with a child between 3 and 6 years old. Results extend the literature by using a…
Development of a spinning wave heat engine
NASA Technical Reports Server (NTRS)
Zinn, B. T.; Powell, E. A.; Hubbartt, J. E.
1982-01-01
A theoretical analysis and an experimental investigation were conducted to assess the feasibility of developing a spinning wave heat engine. Such as engine would utilize a large amplitude traveling acoustic wave rotating around a cylindrica chamber, and it should not suffer from the inefficiency, noise, and intermittent thrust which characterizes pulse jet engines. The objective of this investigation was to determine whether an artificially driven large amplitude spinning transverse wave could induce a steady flow of air through the combustion chamber under cold flow conditions. In the theoretical analysis the Maslen and Moore perturbation technique was extended to study flat cylinders (pancake geometry) with completely open side walls and a central opening. In the parallel experimental study, a test moel was used to determine resonant frequencies and radial pressure distributions, as well as oscillatory and steady flow velocities at the inner and outer peripheries. The experimental frequency was nearly the same as the theoretical acoustic value for a model of the same outer diameter but without a central hole. Although the theoretical analysis did not predict a steady velocity component, simulaneous measurements of hotwire and microphone responses have shown that the spinning wave pumps a mean flow radially outward through the cavity.
Peleg, Micha; Normand, Mark D
2015-09-01
When a vitamin's, pigment's or other food component's chemical degradation follows a known fixed order kinetics, and its rate constant's temperature-dependence follows a two parameter model, then, at least theoretically, it is possible to extract these two parameters from two successive experimental concentration ratios determined during the food's non-isothermal storage. This requires numerical solution of two simultaneous equations, themselves the numerical solutions of two differential rate equations, with a program especially developed for the purpose. Once calculated, these parameters can be used to reconstruct the entire degradation curve for the particular temperature history and predict the degradation curves for other temperature histories. The concept and computation method were tested with simulated degradation under rising and/or falling oscillating temperature conditions, employing the exponential model to characterize the rate constant's temperature-dependence. In computer simulations, the method's predictions were robust against minor errors in the two concentration ratios. The program to do the calculations was posted as freeware on the Internet. The temperature profile can be entered as an algebraic expression that can include 'If' statements, or as an imported digitized time-temperature data file, to be converted into an Interpolating Function by the program. The numerical solution of the two simultaneous equations requires close initial guesses of the exponential model's parameters. Programs were devised to obtain these initial values by matching the two experimental concentration ratios with a generated degradation curve whose parameters can be varied manually with sliders on the screen. These programs too were made available as freeware on the Internet and were tested with published data on vitamin A. Copyright © 2015 Elsevier Ltd. All rights reserved.