An experimental and theoretical study of structural damping in compliant foil bearings

NASA Technical Reports Server (NTRS)

Ku, C.-P. Roger

1994-01-01

This paper describes an experimental investigation into the dynamic characteristics of corrugated foil (bump foil) strips used in compliant surface foil bearings. This study provided and opportunity to quantify the structural damping of bump foil strips. The experimental data were compared to results obtained by a theoretical model developed earlier. The effects of bearing design parameters, such as static loads, dynamic displacement amplitudes, bump configurations, pivot locations, surface coatings, and lubricant were also evaluated. An understanding of the dynamic characteristics of bump foil strips resulting from this work offers designers a means for enhancing the design of high-performance compliant foil bearings.

A Design Study of a Multimedia Instructional Grammar Program with Embedded Tracking

ERIC Educational Resources Information Center

Koehler, Natalya A.; Thompson, Ann D.; Phye, Gary D.

2011-01-01

This is a design study meant to demonstrate the feasibility of integrating three rather different theoretical perspectives for future efforts in multimedia instructional design. A multimedia instructional grammar program contextualized within the teaching of English as a Second Language (ESL) was developed and evaluated. The program design was…

Applying Semiotic Theories to Graphic Design Education: An Empirical Study on Poster Design Teaching

ERIC Educational Resources Information Center

Yang, Chao-Ming; Hsu, Tzu-Fan

2015-01-01

The rationales behind design are dissimilar to those behind art. Establishing an adequate theoretical foundation for conducting design education can facilitate scientising design methods. Thus, from the perspectives of the semiotic theories proposed by Saussure and Peirce, we investigated graphic design curricula by performing teaching…

Variation in Research Designs Used to Test the Effectiveness of Dissemination and Implementation Strategies: A Review.

PubMed

Mazzucca, Stephanie; Tabak, Rachel G; Pilar, Meagan; Ramsey, Alex T; Baumann, Ana A; Kryzer, Emily; Lewis, Ericka M; Padek, Margaret; Powell, Byron J; Brownson, Ross C

2018-01-01

The need for optimal study designs in dissemination and implementation (D&I) research is increasingly recognized. Despite the wide range of study designs available for D&I research, we lack understanding of the types of designs and methodologies that are routinely used in the field. This review assesses the designs and methodologies in recently proposed D&I studies and provides resources to guide design decisions. We reviewed 404 study protocols published in the journal Implementation Science from 2/2006 to 9/2017. Eligible studies tested the efficacy or effectiveness of D&I strategies (i.e., not effectiveness of the underlying clinical or public health intervention); had a comparison by group and/or time; and used ≥1 quantitative measure. Several design elements were extracted: design category (e.g., randomized); design type [e.g., cluster randomized controlled trial (RCT)]; data type (e.g., quantitative); D&I theoretical framework; levels of treatment assignment, intervention, and measurement; and country in which the research was conducted. Each protocol was double-coded, and discrepancies were resolved through discussion. Of the 404 protocols reviewed, 212 (52%) studies tested one or more implementation strategy across 208 manuscripts, therefore meeting inclusion criteria. Of the included studies, 77% utilized randomized designs, primarily cluster RCTs. The use of alternative designs (e.g., stepped wedge) increased over time. Fewer studies were quasi-experimental (17%) or observational (6%). Many study design categories (e.g., controlled pre-post, matched pair cluster design) were represented by only one or two studies. Most articles proposed quantitative and qualitative methods (61%), with the remaining 39% proposing only quantitative. Half of protocols (52%) reported using a theoretical framework to guide the study. The four most frequently reported frameworks were Consolidated Framework for Implementing Research and RE-AIM ( n  = 16 each), followed by Promoting Action on Research Implementation in Health Services and Theoretical Domains Framework ( n  = 12 each). While several novel designs for D&I research have been proposed (e.g., stepped wedge, adaptive designs), the majority of the studies in our sample employed RCT designs. Alternative study designs are increasing in use but may be underutilized for a variety of reasons, including preference of funders or lack of awareness of these designs. Promisingly, the prevalent use of quantitative and qualitative methods together reflects methodological innovation in newer D&I research.

Use of theoretical and conceptual frameworks in qualitative research.

PubMed

Green, Helen Elise

2014-07-01

To debate the definition and use of theoretical and conceptual frameworks in qualitative research. There is a paucity of literature to help the novice researcher to understand what theoretical and conceptual frameworks are and how they should be used. This paper acknowledges the interchangeable usage of these terms and researchers' confusion about the differences between the two. It discusses how researchers have used theoretical and conceptual frameworks and the notion of conceptual models. Detail is given about how one researcher incorporated a conceptual framework throughout a research project, the purpose for doing so and how this led to a resultant conceptual model. Concepts from Abbott (1988) and Witz ( 1992 ) were used to provide a framework for research involving two case study sites. The framework was used to determine research questions and give direction to interviews and discussions to focus the research. Some research methods do not overtly use a theoretical framework or conceptual framework in their design, but this is implicit and underpins the method design, for example in grounded theory. Other qualitative methods use one or the other to frame the design of a research project or to explain the outcomes. An example is given of how a conceptual framework was used throughout a research project. Theoretical and conceptual frameworks are terms that are regularly used in research but rarely explained. Textbooks should discuss what they are and how they can be used, so novice researchers understand how they can help with research design. Theoretical and conceptual frameworks need to be more clearly understood by researchers and correct terminology used to ensure clarity for novice researchers.

A Content Analysis of Nine Literacy Journals, 2009-2014

ERIC Educational Resources Information Center

Parsons, Seth A.; Gallagher, Melissa A.

2016-01-01

The purpose of this study was to determine the topics being studied, theoretical perspectives being used, and methods being implemented in current literacy research. A research team completed a content analysis of nine journals from 2009 to 2014 to gather data. In the 1,238 articles analyzed, the topics, theoretical perspectives, research designs,…

The Bobath (NDT) concept in adult neurological rehabilitation: what is the state of the knowledge? A scoping review. Part II: intervention studies perspectives.

PubMed

Vaughan-Graham, Julie; Cott, Cheryl; Wright, F Virginia

2015-01-01

The study's purpose was to describe the range of knowledge pertaining to the Bobath (NDT) concept in adult neurological rehabilitation, synthesizes the findings, identify knowledge gaps and develop empirically based recommendations for future research. A scoping review of research and non-research articles published from 2007 to 2012. Two independent reviewers selected studies based on a systematic procedure. Inclusion criteria for studies were electronically accessible English language literature with Bobath and/or Neurodevelopmental Therapy as the subject heading in the title/keyword/abstract/intervention comparison with respect to adult neurological conditions. Data were abstracted and summarized with respect to study design, theoretical framework, clinical application including population representation, study fidelity, intervention comparison, duration of care, measurement and findings. Of the 33 publications identified 17 were intervention studies (11 RCT's/1 prospective parallel group design/5 N-of-1). One other paper was a systematic review. The intervention studies, primarily RCT designs, have serious methodological concerns particularly related to study/treatment fidelity and measurement resulting in no clear clinical direction. Aspects such as theoretical framework, therapist skill, quality of movement measurement and individualized interventions require careful consideration in the design of Bobath studies. Implications for Rehabilitation Future intervention studies should be based on the current Bobath theoretical framework and key aspects of clinical practice. Study and treatment fidelity issues need to be carefully considered when interpreting the results of existing RCT's evaluating the Bobath concept. N-of-1 randomized, observational, factorial and mixed method study designs should be considered as alternative study options.

Standards of Multimedia Graphic Design in Education

ERIC Educational Resources Information Center

Aldalalah, Osamah Ahmad; Ababneh, Ziad Waleed Mohamed

2015-01-01

This study aims to determine Standards of Multimedia Graphic Design in Education through the analysis of the theoretical basis and previous studies related to this subject. This study has identified the list of standards of Multimedia, Graphic Design, each of which has a set indicator through which the quality of Multimedia can be evaluated in…

Theoretical models of parental HIV disclosure: a critical review.

PubMed

Qiao, Shan; Li, Xiaoming; Stanton, Bonita

2013-01-01

This study critically examined three major theoretical models related to parental HIV disclosure (i.e., the Four-Phase Model [FPM], the Disclosure Decision Making Model [DDMM], and the Disclosure Process Model [DPM]), and the existing studies that could provide empirical support to these models or their components. For each model, we briefly reviewed its theoretical background, described its components and/or mechanisms, and discussed its strengths and limitations. The existing empirical studies supported most theoretical components in these models. However, hypotheses related to the mechanisms proposed in the models have not yet tested due to a lack of empirical evidence. This study also synthesized alternative theoretical perspectives and new issues in disclosure research and clinical practice that may challenge the existing models. The current study underscores the importance of including components related to social and cultural contexts in theoretical frameworks, and calls for more adequately designed empirical studies in order to test and refine existing theories and to develop new ones.

Professional Development for Design-Based Learning in Engineering Education: A Case Study

ERIC Educational Resources Information Center

Gómez Puente, Sonia M.; van Eijck, Michiel; Jochems, Wim

2015-01-01

Design-based learning (DBL) is an educational approach in which students gather and apply theoretical knowledge to solve design problems. In this study, we examined how critical DBL dimensions (project characteristics, design elements, the teacher's role, assessment, and social context) are applied by teachers in the redesign of DBL projects.…

Professional development for design-based learning in engineering education: a case study

NASA Astrophysics Data System (ADS)

Gómez Puente, Sonia M.; van Eijck, Michiel; Jochems, Wim

2015-01-01

Design-based learning (DBL) is an educational approach in which students gather and apply theoretical knowledge to solve design problems. In this study, we examined how critical DBL dimensions (project characteristics, design elements, the teacher's role, assessment, and social context) are applied by teachers in the redesign of DBL projects. We conducted an intervention for the professional development of the DBL teachers in the Mechanical Engineering and the Electrical Engineering departments. We used the Experiential Learning Cycle as an educational model for the professionalisation programme. The findings show that the programme encouraged teachers to apply the DBL theoretical framework. However, there are some limitations with regard to specific project characteristics. Further research into supporting teachers to develop open-ended and multidisciplinary activities in the projects that support learning is recommended.

Study of crash energy absorption characteristics of inversion tube on passenger vehicle

NASA Astrophysics Data System (ADS)

Liu, Jiandong; Liu, Tao; Yao, Shengjie; Zhao, Rutao

2017-09-01

This article studied the energy absorption characteristics of the inversion tube and acquired the inversion tube design key dimensions under theoretical conditions by performing formula derivation in the quasi-static and dynamic state based on the working principle of the inversion tube: free inversion. The article further adopted HyperMesh and LS-Dyna to perform simulation and compared the simulation result with the theoretical calculating value for comparison. The design was applied in the full-vehicle model to perform 50km/h front fullwidth crash simulation. The findings showed that the deformation mode of the inversion tube in the full-vehicle crash was consistent with the design mode, and the inversion tube absorbed 33.0% of total energy, thereby conforming to the vehicle safety design requirements.

An Investigation of the Artifacts and Process of Constructing Computers Games about Environmental Science in a Fifth Grade Classroom

ERIC Educational Resources Information Center

Baytak, Ahmet; Land, Susan M.

2011-01-01

This study employed a case study design (Yin, "Case study research, design and methods," 2009) to investigate the processes used by 5th graders to design and develop computer games within the context of their environmental science unit, using the theoretical framework of "constructionism." Ten fifth graders designed computer games using "Scratch"…

Scaffolding for Argumentation in Hypothetical and Theoretical Biology Concepts

ERIC Educational Resources Information Center

Weng, Wan-Yun; Lin, Yu-Ren; She, Hsiao-Ching

2017-01-01

The present study investigated the effects of online argumentation scaffolding on students' argumentation involving hypothetical and theoretical biological concepts. Two types of scaffolding were developed in order to improve student argumentation: continuous scaffolding and withdraw scaffolding. A quasi-experimental design was used with four…

Developing a Conceptual Framework for Participatory Design of Psychosocial and Physical Learning Environments

ERIC Educational Resources Information Center

Mäkelä, Tiina; Helfenstein, Sacha

2016-01-01

The present study shows how the mixed-methods approach can be used in capturing and organising learning environment (LE) characteristics for the participatory design of psychosocial and physical LEs involving learners. Theoretical constructs were tested and further elaborated on in the analysis of two similar educational design research studies:…

The Aerodynamic Optimization of Wings at Subsonic Speeds and the Influence of Wingtip Design. Thesis

NASA Technical Reports Server (NTRS)

Zimmer, H.

1987-01-01

Some of the objectives of modern aircraft development are related to the achievement of reduced fuel consumption and aircraft noise. This investigation is mainly concerned with the aerodynamic aspects of aircraft development, i.e., reduction of induced drag. New studies of wing design, and in particular wing tips, are considered. Induced drag is important since, in cruising flight, it accounts for approximately one-third of the entire drag for the aircraft, and one-half while climbing. A survey is presented for the wing geometries and wing tip designs studied, and theoretical investigations of different planar wings with systematically varied wing tip forms are conducted. Attention is also paid to a theoretical study of some planar and nonplanar wings and their comparison with experimental data.

Comment on Black's (1993) article, "comparing genuine and simulated suicide notes: a new perspective".

PubMed

Diamond, G M; More, D L; Hawkins, A G; Soucar, E

1995-02-01

The recent article by Stephen T. Black (1993) comparing genuine suicide notes with simulated notes is examined here. This article corrected a sampling error made in the original study by E. S. Shneidman and N. Farberow (1957), but Black's design suffers from theoretical and methodological problems that render it uninterpretable: First, no theoretical background is elaborated, and no hypotheses are offered. Second, no constructs are operationalized, and no predictions are tested. In the present article, the operational design is critiqued, and then it is suggested that the study of suicide notes in this fashion should cease.

Theoretical Study of Si(x) Ge(y)Li(z) (x=4-10, y=1-10, z=0-10) Clusters for Designing of Novel Nanostructured Materials to be Utilized as Anodes for Lithium-Ion Batteries

DTIC Science & Technology

2015-03-16

AFRL-OSR-VA-TR-2015-0088 Theoretical Study of Novel Nanostructured Materials for Lithium - Ion Batteries Mario Sanchez-Vazquez CENTRO DE INVESTIGACION...SiGeLi Clusters for Design of Novel Nanostructured Materials to Be Utilized as Anodes for Lithium - ion Batteries 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER...utilized as anodes for Lithium - ion batteries Final Report Nancy Perez-Peralta and Mario Sanchez-Vazquez Abstract In order to find out if

Helping Education Students Understand Learning through Designing

ERIC Educational Resources Information Center

Ronen-Fuhrmann, Tamar; Kali, Yael; Hoadley, Christopher

2008-01-01

This article describes a course in which graduate students in education learn practical and theoretical aspects of educational design by creating technologies for learning. The course was built around three themes: "Analyzing technologies," in which students study state-of- the-art technologies and interview their designers; "design studio," in…

Toward an Instructional Philosophy: "A Theoretical Framework for Teaching and Training at Salman Bin Abdulaziz University (SAU)"

ERIC Educational Resources Information Center

Qandile, Yasine A.; Al-Qasim, Wajeeh Q.

2014-01-01

The purpose of this study is to construct a clear instructional philosophy for Salman bin Abdulaziz University as a fundamental basis for teaching and training as well as a theoretical framework for curriculum design and development. The study attempts to answer the main questions about pertaining to the basic structure of contemporary higher…

Theoretical Value Belief, Cognitive Ability, and Personality as Predictors of Student Performance in Object-Oriented Programming Environments

ERIC Educational Resources Information Center

Hall, Dianne J.; Cegielski, Casey G.; Wade, James N.

2006-01-01

The research described in this article reports the results of a study designed to evaluate the relationship among object-oriented (OO) computer programming task performance and a student's (1) theoretical value belief, (2) cognitive ability, and (3) personality. The results of this study do not support the assertion that cognitive ability is a…

Toward an Integrative Theoretical Framework for Explaining Beliefs about Wife Beating: A Study among Students of Nursing from Turkey

ERIC Educational Resources Information Center

Haj-Yahia, Muhammad M.; Uysal, Aynur

2011-01-01

An integrative theoretical framework was tested as the basis for explaining beliefs about wife beating among Turkish nursing students. Based on a survey design, 406 nursing students (404 females) in all 4 years of undergraduate studies completed a self-administered questionnaire. Questionnaires were distributed and collected from the participants…

Rational design of new electrolyte materials for electrochemical double layer capacitors

NASA Astrophysics Data System (ADS)

Schütter, Christoph; Husch, Tamara; Viswanathan, Venkatasubramanian; Passerini, Stefano; Balducci, Andrea; Korth, Martin

2016-09-01

The development of new electrolytes is a centerpiece of many strategies to improve electrochemical double layer capacitor (EDLC) devices. We present here a computational screening-based rational design approach to find new electrolyte materials. As an example application, the known chemical space of almost 70 million compounds is investigated in search of electrochemically more stable solvents. Cyano esters are identified as especially promising new compound class. Theoretical predictions are validated with subsequent experimental studies on a selected case. These studies show that based on theoretical predictions only, a previously untested, but very well performing compound class was identified. We thus find that our rational design strategy is indeed able to successfully identify completely new materials with substantially improved properties.

Theoretical modeling and design of photonic structures in zeolite nanocomposites for gas sensing. Part I: surface relief gratings.

PubMed

Cody, D; Naydenova, I

2017-12-01

The suitability of holographic structures fabricated in zeolite nanoparticle-polymer composite materials for gas sensing applications has been investigated. Theoretical modeling of the sensor response (i.e., change in hologram readout due to a change in refractive index modulation or thickness as a result of gas adsorption) of different sensor designs was carried out using Raman-Nath theory and Kogelnik's coupled wave theory. The influence of a range of parameters on the sensor response of holographically recorded surface and volume photonic grating structures has been studied, namely the phase difference between the diffracted and probe beam introduced by the grating, grating geometry, thickness, spatial frequency, reconstruction wavelength, and zeolite nanoparticle refractive index. From this, the optimum fabrication conditions for both surface and volume holographic gas sensor designs have been identified. Here, in part I, results from theoretical modeling of the influence of design on the sensor response of holographically inscribed surface relief structures for gas sensing applications is reported.

Improving Students' Conceptual Understanding of a Specific Content Learning: A Designed Teaching Sequence

ERIC Educational Resources Information Center

Ahmad, N. J.; Lah, Y. Che

2012-01-01

The efficacy of a teaching sequence designed for a specific content of learning of electrochemistry is described in this paper. The design of the teaching draws upon theoretical insights into perspectives on learning and empirical studies to improve the teaching of this topic. A case study involving two classes, the experimental and baseline…

Symbolic interactionism as a theoretical perspective for multiple method research.

PubMed

Benzies, K M; Allen, M N

2001-02-01

Qualitative and quantitative research rely on different epistemological assumptions about the nature of knowledge. However, the majority of nurse researchers who use multiple method designs do not address the problem of differing theoretical perspectives. Traditionally, symbolic interactionism has been viewed as one perspective underpinning qualitative research, but it is also the basis for quantitative studies. Rooted in social psychology, symbolic interactionism has a rich intellectual heritage that spans more than a century. Underlying symbolic interactionism is the major assumption that individuals act on the basis of the meaning that things have for them. The purpose of this paper is to present symbolic interactionism as a theoretical perspective for multiple method designs with the aim of expanding the dialogue about new methodologies. Symbolic interactionism can serve as a theoretical perspective for conceptually clear and soundly implemented multiple method research that will expand the understanding of human health behaviour.

Analyzing Data from a Pretest-Posttest Control Group Design: The Importance of Statistical Assumptions

ERIC Educational Resources Information Center

Zientek, Linda; Nimon, Kim; Hammack-Brown, Bryn

2016-01-01

Purpose: Among the gold standards in human resource development (HRD) research are studies that test theoretically developed hypotheses and use experimental designs. A somewhat typical experimental design would involve collecting pretest and posttest data on individuals assigned to a control or experimental group. Data from such a design that…

User-Design: A Case Application in Health Care Training.

ERIC Educational Resources Information Center

Carr-Chellman, Alison; Cuyar, Craig; Breman, Jeroen

1998-01-01

Discussion of user-design as a theoretical process for creating training, software, and computer systems focuses on a case study that describes user-design methodology in home health care through the context of diffusing a new laptop patient-record-keeping system with home nurses. Research needs and implications for the design process are…

Design of catalysts by different substituent groups to the ;cut g-C3N4; single layer

NASA Astrophysics Data System (ADS)

Xu, Weiwei; Tang, Chao; Chen, Chongyang; Li, Youyong; Xu, Lai

2017-09-01

Graphitic carbon nitride has been wildly studied as a kind of promising photocatalysts for hydrogen evolution. However, it has a low intrinsic activity. Herein, we designed new periodic structures "cut g-C3N4", and adding the new substituent groups. We employed density functional theory to calculate the charge distribution and catalytic properties of hydrogen evolution on the structures. We got a theoretical view that introducing conjugate substituents can enhance the catalytic performance for hydrogen evolution. Furthermore, it provided a theoretical guidance for the reasonable design of two dimensional non-metallic photocatalysts, with lower activation barrier of the catalytic reaction.

Study of Theoretical and Numerical Fluid Characteristics of Plain Wing with Winglets

NASA Astrophysics Data System (ADS)

Nabhan, Mohamed B. W.

2018-05-01

Aerodynamic characteristics of plain wing designed for Light Sport Aircraft has been studied. The fluid characteristics include induced drag and lift to drag ratio. Then, winglets are added to reduce the induced drag and increase the lift to drag ratio which are affected by the wing tip vortices. The theoretical and numerical approaches are used to verify the results. A rectangular untwisted 9.528 m wing spans with an Airfoil NACA 4412 was used for the basic design. Winglets are added with a tip airfoil of NACA 0012, side angle of 65° and new projected area of 10.328 m2. Lift and drag coefficients are used as means to measure the improvement of the aerodynamic characteristics. The wing tip vortices increase the induced drag and spoil the lift over the wing's surface. The winglets design main objectives are to decrease the induced drag, decrease the fuel consumption, and increase the flight safety, especially in take-off condition. The wing with winglets model was simulated first using 3-D Fluent ANSYS version 14 at 50 m/s velocity and (0°, 5°, and 10°) angles of attack with laminar flow and standard atmospheric conditions at 15°C, and 101 kPa and all other flow parameters as well. The second verification method was to simulate the 3-D model using the 3-D Foil Multi-Surfaces code again with the same flow parameters. Finally, the last verification method was to solve the problem theoretically using the theoretical governing equations. The theoretical solutions were used as a base line for all other results. The total drag reduction observed from the calculation is about 2% to 14.5% during the takeoff regime, where the induced drag contributes about 60% of total drag of the wings. The lift to drag ratio improved also in our designed model wing with winglets by a maximum of 18.6% from the plain wing design.

A Study of the Effectiveness of Three Types of Visual Devices on the Achievement of Selected Theoretical Concepts by Elementary School Children.

ERIC Educational Resources Information Center

McIntyre, Patrick Joseph

The purpose of this study was to determine the relative effectiveness of three different types of visual devices in an instructional program designed to teach an understanding of selected theoretical science concepts to elementary school children. The visual devices were prepared using Bruner's three modes of representation (enactive, iconic, and…

Information Design Theories

ERIC Educational Resources Information Center

Pettersson, Rune

2014-01-01

Information design has practical and theoretical components. As an academic discipline we may view information design as a combined discipline, a practical theory, or as a theoretical practice. So far information design has incorporated facts, influences, methods, practices, principles, processes, strategies, and tools from a large number of…

The personnel economics approach to public workforce research.

PubMed

Gibbs, Michael

2009-11-01

This article argues that the relatively new field of personnel economics (PE) holds strong potential as a tool for studying public sector workforces. This subfield of labor economics is based on a strong foundation of microeconomics, which provides a robust theoretical foundation for studying workforce and organizational design issues. PE has evolved on this foundation to a strong practical emphasis, with theoretical insights designed for practical use and with strong focus on empirical research. The field is also characterized by creative data entrepreneurship. The types of datasets that personnel economists use are described. If similar datasets can be obtained for public sector workforces, PE should be a very useful approach for studying them.

Establishment and validation for the theoretical model of the vehicle airbag

NASA Astrophysics Data System (ADS)

Zhang, Junyuan; Jin, Yang; Xie, Lizhe; Chen, Chao

2015-05-01

The current design and optimization of the occupant restraint system (ORS) are based on numerous actual tests and mathematic simulations. These two methods are overly time-consuming and complex for the concept design phase of the ORS, though they're quite effective and accurate. Therefore, a fast and directive method of the design and optimization is needed in the concept design phase of the ORS. Since the airbag system is a crucial part of the ORS, in this paper, a theoretical model for the vehicle airbag is established in order to clarify the interaction between occupants and airbags, and further a fast design and optimization method of airbags in the concept design phase is made based on the proposed theoretical model. First, the theoretical expression of the simplified mechanical relationship between the airbag's design parameters and the occupant response is developed based on classical mechanics, then the momentum theorem and the ideal gas state equation are adopted to illustrate the relationship between airbag's design parameters and occupant response. By using MATLAB software, the iterative algorithm method and discrete variables are applied to the solution of the proposed theoretical model with a random input in a certain scope. And validations by MADYMO software prove the validity and accuracy of this theoretical model in two principal design parameters, the inflated gas mass and vent diameter, within a regular range. This research contributes to a deeper comprehension of the relation between occupants and airbags, further a fast design and optimization method for airbags' principal parameters in the concept design phase, and provides the range of the airbag's initial design parameters for the subsequent CAE simulations and actual tests.

Theorising Teaching and Learning: Pre-Service Teachers' Theoretical Awareness of Learning

ERIC Educational Resources Information Center

Brante, Göran; Holmqvist Olander, Mona; Holmquist, Per-Ola; Palla, Marta

2015-01-01

We examine pre-service teachers' theoretical learning during one five-week training module, and their educators' learning about better lecture design to foster student learning. The study is iterative: interventions (one per group) were implemented sequentially in student groups A-C, the results of the previous intervention serving as the baseline…

School Leadership, Social Justice and Immigration: Examining, Exploring and Extending Two Frameworks

ERIC Educational Resources Information Center

Brooks, Jeffrey S.; Normore, Anthony H.; Wilkinson, Jane

2017-01-01

Purpose: The purpose of this paper is to explore theoretical connections between educational leadership for social justice and support for immigration. The authors seek to identify strengths, weaknesses and opportunities for further study and improved practice. Design/methodology/approach: This is a theoretical research paper that introduces,…

Reading Comprehension to 1970: Its Theoretical and Empirical Bases, and Its Implementation in Secondary Professional Textbooks, Instructional Materials, and Tests.

ERIC Educational Resources Information Center

Harker, William John

This study was designed: (1) to determine current concepts of reading comprehension deriving from experimental investigations and theoretical statements, and (2) to establish whether these concepts are represented consistently in current secondary professional reading textbooks, instructional materials, and published tests. Current knowledge of…

Toward an Organizational Model of Change in Elementary Schools: The Contribution of Organizational Learning Mechanisms

ERIC Educational Resources Information Center

Schechter, Chen; Qadach, Mowafaq

2012-01-01

Purpose: This study explored a theoretical model that links teachers' perceived uncertainty and teachers' sense of collective efficacy with organizational learning mechanisms (OLMs) in elementary schools. OLMs serve as a mediator construct. Research Design: For testing the primary theoretical model, 801 teachers from 61 elementary schools (33…

Alternative approaches to analytical designs in occupational injury epidemiology.

PubMed

Mittleman, M A; Maldonado, G; Gerberich, S G; Smith, G S; Sorock, G S

1997-08-01

In this paper, we discuss the theoretical framework upon which observational studies of occupational injuries are based. Following a general description of how causal effects are estimated, the challenges faced by researchers working in this area are outlined, with an emphasis on case-control studies. These challenges include defining the at-risk period for workers whose tasks change over time and whose hazard period may be very brief, evaluating the underreporting of both exposures and injuries, and considering the effects of multiple injuries per individual on study design and data analysis. We review both the theoretical and practical considerations in the design and conduct of traditional case-control studies, based on the collection of individual level data, as well as other approaches, such as using information culled from administrative and descriptive databases, and case-control studies in which the plant or work site is the unit of analysis. The case-crossover design is also reviewed and its utility for reducing confounding due to differences between individuals by self-matching is highlighted. While this design has not yet been applied to the work setting, its potential for increasing our understanding of the causes of acute-onset occupational injuries seems promising. Finally, a variety of hybrid designs are discussed, including combinations of case-control, case-crossover, and cohort designs.

Team Learning: Collective Reflection Processes in Teacher Teams

ERIC Educational Resources Information Center

Ohlsson, Jon

2013-01-01

Purpose: The purpose of this paper is to contribute to further studies of theoretical and conceptual understanding of teachers' team learning processes, with a main focus on team work, team atmosphere, and collective reflections. Design/methodology/approach: The empirical study was designed as a multi-case study in a research and development…

Developing Learning Theory by Refining Conjectures Embodied in Educational Designs

ERIC Educational Resources Information Center

Sandoval, William A.

2004-01-01

Designed learning environments embody conjectures about learning and instruction, and the empirical study of learning environments allows such conjectures to be refined over time. The construct of embodied conjecture is introduced as a way to demonstrate the theoretical nature of learning environment design and to frame methodological issues in…

A Model for Teaching Information Design

ERIC Educational Resources Information Center

Pettersson, Rune

2011-01-01

The author presents his views on the teaching of information design. The starting point includes some general aspects of teaching and learning. The multidisciplinary structure and content of information design as well as the combined practical and theoretical components influence studies of the discipline. Experiences from working with a model for…

Feedback Model to Support Designers of Blended-Learning Courses

ERIC Educational Resources Information Center

Hummel, Hans G. K.

2006-01-01

Although extensive research has been carried out, describing the role of feedback in education, and many theoretical models are yet available, procedures and guidelines for actually designing and implementing feedback in practice have remained scarce so far. This explorative study presents a preliminary six-phase design model for feedback…

Students' Construction of External Representations in Design-Based Learning Situations

ERIC Educational Resources Information Center

de Vries, Erica

2006-01-01

This article develops a theoretical framework for the study of students' construction of mixed multiple external representations in design-based learning situations involving an adaptation of professional tasks and tools to a classroom setting. The framework draws on research on professional design processes and on learning with multiple external…

Communication Resource Use in a Networked Collaborative Design Environment.

ERIC Educational Resources Information Center

Gay, Geri; Lentini, Marc

The purpose of this exploratory study was to examine student use of a prototype networked collaborative design environment to support or augment learning about engineering design. The theoretical framework is based primarily on Vygotsky's social construction of knowledge and the belief that collaboration and communication are critical components…

Numerical and Theoretical Considerations for the Design of the AVT-183 Diamond-Wing Experimental Investigations

NASA Technical Reports Server (NTRS)

Boelens, Okko J.; Luckring, James M.; Breitsamter, Christian; Hovelmann, Andreas; Knoth, Florian; Malloy, Donald J.; Deck, Sebatien

2015-01-01

A diamond-wing configuration has been developed to isolate and study blunt-leading edge vortex separation with both computations and experiments. The wing has been designed so that the results are relevant to a more complex Uninhabited Combat Air Vehicle concept known as SACCON. The numerical and theoretical development process for this diamond wing is presented, including a view toward planned wind tunnel experiments. This work was conducted under the NATO Science and Technology Organization, Applied Vehicle Technology panel. All information is in the public domain.

Creativity in Fashion Design Students

ERIC Educational Resources Information Center

Robinson, Joyce Robin

2011-01-01

The purpose of this study was to examine relationships among environmental influences, changes in domain specific knowledge, and changes in tolerance of ambiguity as well as changes in creativity of individuals majoring in fashion design at four-year universities. This study was based on the confluence theoretical approach which holds that…

Strategies for Improving Power in School-Randomized Studies of Professional Development

ERIC Educational Resources Information Center

Kelcey, Ben; Phelps, Geoffrey

2013-01-01

Objectives: Group-randomized designs are well suited for studies of professional development because they can accommodate programs that are delivered to intact groups (e.g., schools), the collaborative nature of professional development, and extant teacher/school assignments. Though group designs may be theoretically favorable, prior evidence has…

Accumulating Knowledge: When Are Reading Intervention Results Meaningful?

ERIC Educational Resources Information Center

Fletcher, Jack M.; Wagner, Richard K.

2014-01-01

The three target articles provide examples of intervention studies that are excellent models for the field. They rely on rigorous and elegant designs, the interventions are motivated by attention to underlying theoretical mechanisms, and longitudinal designs are used to examine the duration of effects of interventions that occur. When studies are…

Capturing Individual Uptake: Toward a Disruptive Research Methodology

ERIC Educational Resources Information Center

Bastian, Heather

2015-01-01

This article presents and illustrates a qualitative research methodology for studies of uptake. It does so by articulating a theoretical framework for qualitative investigations of uptake and detailing a research study designed to invoke and capture students' uptakes in a first-year writing classroom. The research design sought to make uptake…

The Information Architecture of E-Commerce: An Experimental Study on User Performance and Preference

NASA Astrophysics Data System (ADS)

Wan Mohd, Wan Abdul Rahim; Md Noor, Nor Laila; Mehad, Shafie

Too often, designers of e-commerce web sites use models, concepts, guidelines, and designs that focus on the artifacts while ignoring the context in which the artifacts will be used. Furthermore, the link between culture and usability in web site IA phenomenon is still considered as uncharted area, as it lacks much theoretical consideration. In an effort toward addressing the aforementioned issues, our study provides a theoretical and empirical link between cultural and usability through the application of ‘Venustas' (Delight) drawn from the architectural field and Hofstede's cultural dimensions. We use Islamic culture as the case study and report on the experiment to investigate the effect of the IA designs based on the cultural dimensions on e-commerce web sites. The result provides partial empirical support to the theorized link between culture and usability based on the usability measurement on user performance and preference. In addition, practical web site IA cultural design prescriptions are also provided.

Satisfiers and Dissatisfiers: A Two-Factor Model for Website Design and Evaluation.

ERIC Educational Resources Information Center

Zhang, Ping; von Dran, Gisela M.

2000-01-01

Investigates Web site design factors and their impact from a theoretical perspective. Presents a two-factor model that can guide Web site design and evaluation. According to the model, there are two types of design factors: hygiene and motivator. Results showed that the two-factor model provides a means for Web-user interface studies. Provides…

Sharing methodology: a worked example of theoretical integration with qualitative data to clarify practical understanding of learning and generate new theoretical development.

PubMed

Yardley, Sarah; Brosnan, Caragh; Richardson, Jane

2013-01-01

Theoretical integration is a necessary element of study design if clarification of experiential learning is to be achieved. There are few published examples demonstrating how this can be achieved. This methodological article provides a worked example of research methodology that achieved clarification of authentic early experiences (AEEs) through a bi-directional approach to theory and data. Bi-directional refers to our simultaneous use of theory to guide and interrogate empirical data and the use of empirical data to refine theory. We explain the five steps of our methodological approach: (1) understanding the context; (2) critique on existing applications of socio-cultural models to inform study design; (3) data generation; (4) analysis and interpretation and (5) theoretical development through a novel application of Metis. These steps resulted in understanding of how and why different outcomes arose from students participating in AEE. Our approach offers a mechanism for clarification without which evidence-based effective ways to maximise constructive learning cannot be developed. In our example it also contributed to greater theoretical understanding of the influence of social interactions. By sharing this example of research undertaken to develop both theory and educational practice we hope to assist others seeking to conduct similar research.

Designing Educative Curriculum Materials: A Theoretically and Empirically Driven Process

ERIC Educational Resources Information Center

Davis, Elizabeth A.; Palincsar, Annemarie Sullivan; Arias, Anna Maria; Bismack, Amber Schultz; Marulis, Loren M.; Iwashyna, Stefanie K.

2014-01-01

In this article, the authors argue for a design process in the development of educative curriculum materials that is theoretically and empirically driven. Using a design-based research approach, they describe their design process for incorporating educative features intended to promote teacher learning into existing, high-quality curriculum…

The design and testing of a caring teaching model based on the theoretical framework of caring in the Chinese Context: a mixed-method study.

PubMed

Guo, Yujie; Shen, Jie; Ye, Xuchun; Chen, Huali; Jiang, Anli

2013-08-01

This paper aims to report the design and test the effectiveness of an innovative caring teaching model based on the theoretical framework of caring in the Chinese context. Since the 1970's, caring has been a core value in nursing education. In a previous study, a theoretical framework of caring in the Chinese context is explored employing a grounded theory study, considered beneficial for caring education. A caring teaching model was designed theoretically and a one group pre- and post-test quasi-experimental study was administered to test its effectiveness. From Oct, 2009 to Jul, 2010, a cohort of grade-2 undergraduate nursing students (n=64) in a Chinese medical school was recruited to participate in the study. Data were gathered through quantitative and qualitative methods to evaluate the effectiveness of the caring teaching model. The caring teaching model created an esthetic situation and experiential learning style for teaching caring that was integrated within the curricula. Quantitative data from the quasi-experimental study showed that the post-test scores of each item were higher than those on the pre-test (p<0.01). Thematic analysis of 1220 narratives from students' caring journals and reports of participant class observation revealed two main thematic categories, which reflected, from the students' points of view, the development of student caring character and the impact that the caring teaching model had on this regard. The model could be used as an integrated approach to teach caring in nursing curricula. It would also be beneficial for nursing administrators in cultivating caring nurse practitioners. Copyright © 2012 Elsevier Ltd. All rights reserved.

Theoretical Design of Multilayer Dental Posts Using CAD-Based Approach and Sol-Gel Chemistry.

PubMed

Maietta, Saverio; De Santis, Roberto; Catauro, Michelina; Martorelli, Massimo; Gloria, Antonio

2018-05-07

A computer-aided design (CAD)-based approach and sol-gel chemistry were used to design a multilayer dental post with a compositional gradient and a Young’s modulus varying from 12.4 to 2.3 GPa in the coronal-apical direction. Specifically, we propose a theoretical multilayer post design, consisting of titanium dioxide (TiO₂) and TiO₂/poly(ε-caprolactone) (PCL) hybrid materials containing PCL up to 24% by weight obtained using the sol-gel method. The current study aimed to analyze the effect of the designed multilayer dental post in endodontically treated anterior teeth. Stress distribution was investigated along and between the post and the surrounding structures. In comparison to a metal post, the most uniform distributions with lower stress values and no significant stress concentration were found when using the multilayer post.

Theoretical studies on the mechanical behavior of granular materials under very low intergranular stresses

NASA Technical Reports Server (NTRS)

French, Kenneth W., Jr.

1986-01-01

The salient aspects of the theoretical modeling of a conventional triaxial test (CTC) of a cohesionless granular medium with stress and strain rate loading are described. Included are a controllable gravitational body force and provision for low confining pressure and/or very low intergranular stress. The modeling includes rational, analytic, and numerical phases, all in various stages of development. The numerical evolutions of theoretical models will be used in final design stages and in the analysis of the experimental data. In this the experimental design stage, it is of special interest to include in the candidate considerations every anomaly found in preliminary terrestrial experimentation. Most of the anomalies will be eliminated by design or enhanced for measurement as the project progresses. The main aspect of design being not the physical apparatus but the type and trajectories of loading elected. The major considerations that have been treated are: appearance and growth of local surface aberrations, stress-power coefficients, strain types, optical strain, radial bead migration, and measures of rotation for the proper stress flux.

Effects of a Theoretically Based Large-Scale Reading Intervention in a Multicultural Urban School District

ERIC Educational Resources Information Center

Sadoski, Mark; Willson, Victor L.

2006-01-01

In 1997, Lindamood-Bell Learning Processes partnered with Pueblo School District 60 (PSD60), a heavily minority urban district with many Title I schools, to implement a theoretically based initiative designed to improve Colorado Student Assessment Program reading scores. In this study, the authors examined achievement in Grades 3-5 during the…

Games and Diabetes: A Review Investigating Theoretical Frameworks, Evaluation Methodologies, and Opportunities for Design Grounded in Learning Theories.

PubMed

Lazem, Shaimaa; Webster, Mary; Holmes, Wayne; Wolf, Motje

2015-09-02

Here we review 18 articles that describe the design and evaluation of 1 or more games for diabetes from technical, methodological, and theoretical perspectives. We undertook searches covering the period 2010 to May 2015 in the ACM, IEEE, Journal of Medical Internet Research, Studies in Health Technology and Informatics, and Google Scholar online databases using the keywords "children," "computer games," "diabetes," "games," "type 1," and "type 2" in various Boolean combinations. The review sets out to establish, for future research, an understanding of the current landscape of digital games designed for children with diabetes. We briefly explored the use and impact of well-established learning theories in such games. The most frequently mentioned theoretical frameworks were social cognitive theory and social constructivism. Due to the limitations of the reported evaluation methodologies, little evidence was found to support the strong promise of games for diabetes. Furthermore, we could not establish a relation between design features and the game outcomes. We argue that an in-depth discussion about the extent to which learning theories could and should be manifested in the design decisions is required. © 2015 Diabetes Technology Society.

Two Year Community: Design and Components of a Two-Year College Interdisciplinary Field-Study Course

ERIC Educational Resources Information Center

Wolfe, Benjamin A.; Martin, Todd C.

2013-01-01

Interdisciplinary field study courses at 2-year colleges can provide an opportunity to enhance student learning. The authors present here an 11-day interdisciplinary field-study course designed for nonscience majors at a 2-year college. Using a theoretical learning framework that emphasizes cognitive and metacognitive gains, the field study…

Designing green derivatives of β-blocker Metoprolol: a tiered approach for green and sustainable pharmacy and chemistry.

PubMed

Rastogi, Tushar; Leder, Christoph; Kümmerer, Klaus

2014-09-01

The presences of micro-pollutants (active pharmaceutical ingredients, APIs) are increasingly seen as a challenge of the sustainable management of water resources worldwide due to ineffective effluent treatment and other measures for their input prevention. Therefore, novel approaches are needed like designing greener pharmaceuticals, i.e. better biodegradability in the environment. This study addresses a tiered approach of implementing green and sustainable chemistry principles for theoretically designing better biodegradable and pharmacologically improved pharmaceuticals. Photodegradation process coupled with LC-MS(n) analysis and in silico tools such as quantitative structure-activity relationships (QSAR) analysis and molecular docking proved to be a very significant approach for the preliminary stages of designing chemical structures that would fit into the "benign by design" concept in the direction of green and sustainable pharmacy. Metoprolol (MTL) was used as an example, which itself is not readily biodegradable under conditions found in sewage treatment and the aquatic environment. The study provides the theoretical design of new derivatives of MTL which might have the same or improved pharmacological activity and are more degradable in the environment than MTL. However, the in silico toxicity prediction by QSAR of those photo-TPs indicated few of them might be possibly mutagenic and require further testing. This novel approach of theoretically designing 'green' pharmaceuticals can be considered as a step forward towards the green and sustainable pharmacy field. However, more knowledge and further experience have to be collected on the full scope, opportunities and limitations of this approach. Copyright © 2014 Elsevier Ltd. All rights reserved.

Developing Pedagogical Practices for English-Language Learners: A Design-Based Approach

ERIC Educational Resources Information Center

Iddings, Ana Christina DaSilva; Rose, Brian Christopher

2012-01-01

This study draws on the application of sociocultural theory to second-language learning and teaching to examine the impact of a design-based research approach on teacher development and literacy instruction to English-language learners (ELLs). Design-based research methodology was employed to derive theoretical suppositions relating to the process…

A Knowledge Conversion Model Based on the Cognitive Load Theory for Architectural Design Education

ERIC Educational Resources Information Center

Wu, Yun-Wu; Liao, Shin; Wen, Ming-Hui; Weng, Kuo-Hua

2017-01-01

The education of architectural design requires balanced curricular arrangements of respectively theoretical knowledge and practical skills to really help students build their knowledge structures, particularly helping them in solving the problems of cognitive load. The purpose of this study is to establish an architectural design knowledge…

Using a Game Environment to Foster Collaborative Learning: A Design-Based Study

ERIC Educational Resources Information Center

Hamalainen, Raija

2011-01-01

Designing collaborative three-dimensional learning games for vocational learning may be one way to respond to the needs of working life. The theoretical vantage points of collaborative learning for game development and the "design-based research" methodology are described; these have been used to support collaborative learning in the…

Tying Theory To Practice: Cognitive Aspects of Computer Interaction in the Design Process.

ERIC Educational Resources Information Center

Mikovec, Amy E.; Dake, Dennis M.

The new medium of computer-aided design requires changes to the creative problem-solving methodologies typically employed in the development of new visual designs. Most theoretical models of creative problem-solving suggest a linear progression from preparation and incubation to some type of evaluative study of the "inspiration." These…

Chasing Innovation: A Pilot Case Study of a Rhizomatic Design Thinking Education Program

ERIC Educational Resources Information Center

Biffi, Alfredo; Bissola, Rita; Imperatori, Barbara

2017-01-01

Purpose: The purpose of this paper is to illustrate and discuss the main features and key challenges of an original post-graduate education program designed according to an innovative theoretical framework promoting design thinking in a rhizomatic approach. By involving different stakeholders, the aim of this entrepreneurship education program is…

Forming Artistic-Design Competency of Vocational Design Teacher

ERIC Educational Resources Information Center

Falco, Vera P.; Fedorov, Vladimir A.; Dorozhkin, Evgenij M.; Merkushova, Nina I.; Bakanach, Olga V.

2016-01-01

The relevance of the problem under study is based on the necessity to achieve effectiveness of the learning process aimed at forming a competent specialist and ensuring the quality of training of vocational teacher of a certain subject (design). The aim of the article is to provide theoretical substantiation, to elaborate and to test the…

Review of sonic fatigue technology

NASA Technical Reports Server (NTRS)

Clarkson, B. L.

1994-01-01

From the early-1960s until the mid-1980s, there was very little theoretical development for sonic fatigue prediction. Design nomographs based on simple theoretical models and results of specially designed tests were developed for most common aircraft structures. The use of advanced composites in the 1980s, however, generated an increased interest in development of more sophisticated theoretical models because of the possibilities for a much wider range of structural designs. The purpose of this report is to review sonic fatigue technology and, in particular, to assess recent developments. It also suggests a plan for a coordinated program of theoretical and experimental work to meet the anticipated needs of future aerospace vehicles.

The Design of Effective Case Study-Related Learning Strategies Training.

ERIC Educational Resources Information Center

Nuttall, Alice E.

The development of case study training materials for an experimental research strategy is described, and the effects of such training are discussed. The theoretical foundation for learning strategies training was a social-cognitive/expectancy value model of college learning and teaching. In a posttest-only 2-group design, 54 students in an…

Designing a Futuristic Business Studies Curriculum

ERIC Educational Resources Information Center

Mei, Chiew Wye; Siraj, Saedah

2013-01-01

This paper is a discourse on the theoretical aspects underpinning the design of the Business Studies curriculum domain. It draws on recent shifts in the business and educational environment of Malaysia, and maps out the methodology and method for expanding and revamping the core ground of the discipline. Using the pragmatic worldview stance, this…

Designing Large-Scale Multisite and Cluster-Randomized Studies of Professional Development

ERIC Educational Resources Information Center

Kelcey, Ben; Spybrook, Jessaca; Phelps, Geoffrey; Jones, Nathan; Zhang, Jiaqi

2017-01-01

We develop a theoretical and empirical basis for the design of teacher professional development studies. We build on previous work by (a) developing estimates of intraclass correlation coefficients for teacher outcomes using two- and three-level data structures, (b) developing estimates of the variance explained by covariates, and (c) modifying…

Contradictory Explorative Assessment. Multimodal Teacher/Student Interaction in Scandinavian Digital Learning Environments

ERIC Educational Resources Information Center

Kjällander, Susanne

2018-01-01

Assessment in the much-discussed digital divide in Scandinavian technologically advanced schools, is the study object of this article. Interaction is studied to understand assessment; and to see how assessment can be didactically designed to recognise students' learning. With a multimodal, design theoretical perspective on learning teachers' and…

What Influences Physical Activity Provision in After-School Childcare in the Absence of Policy Guidance? A Qualitative Exploration

ERIC Educational Resources Information Center

MacFarlane, Kendra; Wharf Higgins, Joan; Naylor, Patti-Jean

2018-01-01

Objective: This study explored factors affecting the implementation of good-quality physical activity provision in after-school childcare delivered in a Canadian jurisdiction without specific policy, standards or active interventions aimed at increasing physical activity underway. Design: Case study design theoretically guided by the…

Psycho-educational strategies to promote fluid adherence in adult hemodialysis patients: a review of intervention studies.

PubMed

Welch, Janet L; Thomas-Hawkins, Charlotte

2005-07-01

We reviewed psycho-educational intervention studies that were designed to reduce interdialytic weight gain (IDWG) in adult hemodialysis patients. Our goals were to critique research methods, describe the effectiveness of tested interventions, and make recommendations for future research. Medline, PsychInfo, and the Cumulative Index to Nursing and Applied Health (CINAHL) databases were searched to identify empirical work. Each study was evaluated in terms of sample, design, theoretical framework, intervention delivery, and outcome. Nine studies were reviewed. Self-monitoring appears to be a promising strategy to be considered to reduce IDWG. Theory was not usually used to guide interventions, designs generally had control groups, interventions were delivered individually, more than one intervention was delivered at a time, the duration of the intervention varied greatly, there was no long-term follow-up, IDWG was the only outcome, and IDWG was operationalized in different ways. Theoretical models and methodological rigor are needed to guide future research. Specific recommendations on design, measurement, and conceptual issues are offered to enhance the effectiveness of future research.

Theoretical Analysis and Design of Ultrathin Broadband Optically Transparent Microwave Metamaterial Absorbers

PubMed Central

Deng, Ruixiang; Li, Meiling; Muneer, Badar; Zhu, Qi; Shi, Zaiying; Song, Lixin; Zhang, Tao

2018-01-01

Optically Transparent Microwave Metamaterial Absorber (OTMMA) is of significant use in both civil and military field. In this paper, equivalent circuit model is adopted as springboard to navigate the design of OTMMA. The physical model and absorption mechanisms of ideal lightweight ultrathin OTMMA are comprehensively researched. Both the theoretical value of equivalent resistance and the quantitative relation between the equivalent inductance and equivalent capacitance are derived for design. Frequency-dependent characteristics of theoretical equivalent resistance are also investigated. Based on these theoretical works, an effective and controllable design approach is proposed. To validate the approach, a wideband OTMMA is designed, fabricated, analyzed and tested. The results reveal that high absorption more than 90% can be achieved in the whole 6~18 GHz band. The fabricated OTMMA also has an optical transparency up to 78% at 600 nm and is much thinner and lighter than its counterparts. PMID:29324686

Theoretical Analysis and Design of Ultrathin Broadband Optically Transparent Microwave Metamaterial Absorbers.

PubMed

Deng, Ruixiang; Li, Meiling; Muneer, Badar; Zhu, Qi; Shi, Zaiying; Song, Lixin; Zhang, Tao

2018-01-11

Optically Transparent Microwave Metamaterial Absorber (OTMMA) is of significant use in both civil and military field. In this paper, equivalent circuit model is adopted as springboard to navigate the design of OTMMA. The physical model and absorption mechanisms of ideal lightweight ultrathin OTMMA are comprehensively researched. Both the theoretical value of equivalent resistance and the quantitative relation between the equivalent inductance and equivalent capacitance are derived for design. Frequency-dependent characteristics of theoretical equivalent resistance are also investigated. Based on these theoretical works, an effective and controllable design approach is proposed. To validate the approach, a wideband OTMMA is designed, fabricated, analyzed and tested. The results reveal that high absorption more than 90% can be achieved in the whole 6~18 GHz band. The fabricated OTMMA also has an optical transparency up to 78% at 600 nm and is much thinner and lighter than its counterparts.

A theoretical model for smoking prevention studies in preteen children.

PubMed

McGahee, T W; Kemp, V; Tingen, M

2000-01-01

The age of the onset of smoking is on a continual decline, with the prime age of tobacco use initiation being 12-14 years. A weakness of the limited research conducted on smoking prevention programs designed for preteen children (ages 10-12) is a well-defined theoretical basis. A theoretical perspective is needed in order to make a meaningful transition from empirical analysis to application of knowledge. Bandura's Social Cognitive Theory (1977, 1986), the Theory of Reasoned Action (Ajzen & Fishbein, 1980), and other literature linking various concepts to smoking behaviors in preteens were used to develop a model that may be useful for smoking prevention studies in preteen children.

An analytical study for the design of advanced rotor airfoils

NASA Technical Reports Server (NTRS)

Kemp, L. D.

1973-01-01

A theoretical study has been conducted to design and evaluate two airfoils for helicopter rotors. The best basic shape, designed with a transonic hodograph design method, was modified to meet subsonic criteria. One airfoil had an additional constraint for low pitching-moment at the transonic design point. Airfoil characteristics were predicted. Results of a comparative analysis of helicopter performance indicate that the new airfoils will produce reduced rotor power requirements compared to the NACA 0012. The hodograph design method, written in CDC Algol, is listed and described.

How to Construct a Mixed Methods Research Design.

PubMed

Schoonenboom, Judith; Johnson, R Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

Enhancing implementation of tobacco use prevention and cessation counselling guideline among dental providers: a cluster randomised controlled trial.

PubMed

Amemori, Masamitsu; Korhonen, Tellervo; Kinnunen, Taru; Michie, Susan; Murtomaa, Heikki

2011-02-14

Tobacco use adversely affects oral health. Tobacco use prevention and cessation (TUPAC) counselling guidelines recommend that healthcare providers ask about each patient's tobacco use, assess the patient's readiness and willingness to stop, document tobacco use habits, advise the patient to stop, assist and help in quitting, and arrange monitoring of progress at follow-up appointments. Adherence to such guidelines, especially among dental providers, is poor. To improve guideline implementation, it is essential to understand factors influencing it and find effective ways to influence those factors. The aim of the present study protocol is to introduce a theory-based approach to diagnose implementation difficulties of TUPAC counselling guidelines among dental providers. Theories of behaviour change have been used to identify key theoretical domains relevant to the behaviours of healthcare providers involved in implementing clinical guidelines. These theoretical domains will inform the development of a questionnaire aimed at assessing the implementation of the TUPAC counselling guidelines among Finnish municipal dental providers. Specific items will be drawn from the guidelines and the literature on TUPAC studies. After identifying potential implementation difficulties, we will design two interventions using theories of behaviour change to link them with relevant behaviour change techniques aiming to improve guideline adherence. For assessing the implementation of TUPAC guidelines, the electronic dental record audit and self-reported questionnaires will be used. To improve guideline adherence, the theoretical-domains approach could provide a comprehensive basis for assessing implementation difficulties, as well as designing and evaluating interventions. After having identified implementation difficulties, we will design and test two interventions to enhance TUPAC guideline adherence. Using the cluster randomised controlled design, we aim to provide further evidence on intervention effects, as well as on the validity and feasibility of the theoretical-domain approach. The empirical data collected within this trial will be useful in testing whether this theoretical-domain approach can improve our understanding of the implementation of TUPAC guidelines among dental providers. Current Controlled Trials ISRCTN15427433.

Different perspectives of cultural mediation: implications for the research design on studies examining its effect on students' cognition

NASA Astrophysics Data System (ADS)

Teo, Tang Wee

2013-06-01

In this forum, I extend Tao, Oliver, and Venville's paper Chinese and Australian children's understanding of the earth: a cross cultural study of conceptual development to discuss the different views on culture and cultural mediation. I tease out nuances in the viewpoints to suggest three ways to theoretically frame studies examining cultural mediation of students' cognition. Specifically, cultural mediation may be attributed to innate psychological attributes, an accretion of cultural elements, or the social interaction process. Each of these ideas represents a theoretical lens and has implications for the research design of studies relating cultural mediation to cognition. In the final section of this forum paper, I show how a study conducted from the symbolic interactionist viewpoint underscoring cultural mediation as a social interaction process might unfold.

Design variables for mechanical properties of bone tissue scaffolds.

PubMed

Howk, Daniel; Chu, Tien-Min G

2006-01-01

The reconstruction of segmental defect in long bone is a clinical challenge. Multiple surgeries are typically required to restore the structure and function of the affected defect site. In order to overcome this defect a biodegradable bone tissue engineering scaffold is used. This scaffold acts as a carrier of proteins and growth factors, while also supporting the load that the bone would normally sustain, until the natural bone can regenerate in its place. Work was done to optimize an existing solid free-form scaffold design. The goal of the optimization was to increase the porosity of the scaffold while maintaining the strength of a previously-tested prototype design. With this in mind, eight new designs were created. These designs were drawn using CAD software and then through the use of finite element analysis the theoretical ultimate compressive strength of each design was obtained. Each scaffold design was constructed by casting a thermal-curable poly(propylene fumarate)/tricalcium phosphate (PPF/TCP) suspension into wax molds fabricated on inkjet printing rapid prototyping machine. The constructs were then experimentally tested by applying a uniaxial compressive load. The theoretical and experimental values of ultimate compressive strength and specific strength of each design were compared. Theoretically, the best scaffold design produced from this work improved upon the current design by increasing the porosity by 46% and also increasing the ultimate compressive strength by 27%. The experimental data was found to match the theoretical strength in four designs, but deviate from the theoretical strength in five designs. The reasons for the deviations and their relation to the rapid prototyping manufacturing technique were discussed. The results of this work show that it is possible to increase the porosity and strength of a bone tissue engineering scaffold through simple iterations in architectural design.

Theoretical Foundations for Website Design Courses.

ERIC Educational Resources Information Center

Walker, Kristin

2002-01-01

Considers how theoretical foundations in website design courses can facilitate students learning the genres of Internet communication. Proposes ways that theories can be integrated into website design courses. Focuses on two students' website portfolios and ways they utilize genre theory and activity theory discussed in class to produce websites…

Theoretical and Experimental Estimations of Volumetric Inductive Phase Shift in Breast Cancer Tissue

NASA Astrophysics Data System (ADS)

González, C. A.; Lozano, L. M.; Uscanga, M. C.; Silva, J. G.; Polo, S. M.

2013-04-01

Impedance measurements based on magnetic induction for breast cancer detection has been proposed in some studies. This study evaluates theoretical and experimentally the use of a non-invasive technique based on magnetic induction for detection of patho-physiological conditions in breast cancer tissue associated to its volumetric electrical conductivity changes through inductive phase shift measurements. An induction coils-breast 3D pixel model was designed and tested. The model involves two circular coils coaxially centered and a human breast volume centrally placed with respect to the coils. A time-harmonic numerical simulation study addressed the effects of frequency-dependent electrical properties of tumoral tissue on the volumetric inductive phase shift of the breast model measured with the circular coils as inductor and sensor elements. Experimentally; five female volunteer patients with infiltrating ductal carcinoma previously diagnosed by the radiology and oncology departments of the Specialty Clinic for Women of the Mexican Army were measured by an experimental inductive spectrometer and the use of an ergonomic inductor-sensor coil designed to estimate the volumetric inductive phase shift in human breast tissue. Theoretical and experimental inductive phase shift estimations were developed at four frequencies: 0.01, 0.1, 1 and 10 MHz. The theoretical estimations were qualitatively in agreement with the experimental findings. Important increments in volumetric inductive phase shift measurements were evident at 0.01MHz in theoretical and experimental observations. The results suggest that the tested technique has the potential to detect pathological conditions in breast tissue associated to cancer by non-invasive monitoring. Further complementary studies are warranted to confirm the observations.

A Theoretically Based Behavioral Nutrition Intervention for Community Elders at High Risk: The B-NICE Randomized Controlled Clinical Trial

PubMed Central

LOCHER, JULIE L.; BALES, CONNIE W.; ELLIS, AMY C.; LAWRENCE, JEANNINE C.; NEWTON, LAURA; RITCHIE, CHRISTINE S.; ROTH, DAVID L.; BUYS, DAVID L.; VICKERS, KRISTIN S.

2012-01-01

We conducted a study designed to evaluate the efficacy and feasibility of a multilevel self-management intervention to improve nutritional intake in a group of older adults receiving Medicare home health services who were at especially high risk for experiencing undernutrition. The Behavioral Nutrition Intervention for Community Elders (B-NICE) trial used a prospective randomized controlled design to determine whether individually tailored counseling focused on social and behavioral aspects of eating resulted in increased caloric intake and improved nutrition-related health outcomes in a high-risk population of older adults. The study was guided by the theoretical approaches of the Ecological Model and Social Cognitive Theory. The development and implementation of the B-NICE protocol, including the theoretical framework, methodology, specific elements of the behavioral intervention, and assurances of the treatment fidelity, as well as the health policy implications of the trial results, are presented in this article. PMID:22098180

The theoretical study of passive and active optical devices via planewave based transfer (scattering) matrix method and other approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhuo, Ye

2011-01-01

In this thesis, we theoretically study the electromagnetic wave propagation in several passive and active optical components and devices including 2-D photonic crystals, straight and curved waveguides, organic light emitting diodes (OLEDs), and etc. Several optical designs are also presented like organic photovoltaic (OPV) cells and solar concentrators. The first part of the thesis focuses on theoretical investigation. First, the plane-wave-based transfer (scattering) matrix method (TMM) is briefly described with a short review of photonic crystals and other numerical methods to study them (Chapter 1 and 2). Next TMM, the numerical method itself is investigated in details and developed inmore » advance to deal with more complex optical systems. In chapter 3, TMM is extended in curvilinear coordinates to study curved nanoribbon waveguides. The problem of a curved structure is transformed into an equivalent one of a straight structure with spatially dependent tensors of dielectric constant and magnetic permeability. In chapter 4, a new set of localized basis orbitals are introduced to locally represent electromagnetic field in photonic crystals as alternative to planewave basis. The second part of the thesis focuses on the design of optical devices. First, two examples of TMM applications are given. The first example is the design of metal grating structures as replacements of ITO to enhance the optical absorption in OPV cells (chapter 6). The second one is the design of the same structure as above to enhance the light extraction of OLEDs (chapter 7). Next, two design examples by ray tracing method are given, including applying a microlens array to enhance the light extraction of OLEDs (chapter 5) and an all-angle wide-wavelength design of solar concentrator (chapter 8). In summary, this dissertation has extended TMM which makes it capable of treating complex optical systems. Several optical designs by TMM and ray tracing method are also given as a full complement of this work.« less

The use of grounded theory in studies of nurses and midwives' coping processes: a systematic literature search.

PubMed

Cheer, Karen; MacLaren, David; Tsey, Komla

2015-01-01

Researchers are increasingly using grounded theory methodologies to study the professional experience of nurses and midwives. To review common grounded theory characteristics and research design quality as described in grounded theory studies of coping strategies used by nurses and midwives. A systematic database search for 2005-2015 identified and assessed grounded theory characteristics from 16 studies. Study quality was assessed using a modified Critical Appraisal Skills Programme tool. Grounded theory was considered a methodology or a set of methods, able to be used within different nursing and midwifery contexts. Specific research requirements determined the common grounded theory characteristics used in different studies. Most researchers did not clarify their epistemological and theoretical perspectives. To improve research design and trustworthiness of grounded theory studies in nursing and midwifery, researchers need to state their theoretical stance and clearly articulate their use of grounded theory methodology and characteristics in research reporting.

Embodied Design: Constructing Means for Constructing Meaning

ERIC Educational Resources Information Center

Abrahamson, Dor

2009-01-01

Design-based research studies are conducted as iterative implementation-analysis-modification cycles, in which emerging theoretical models and pedagogically plausible activities are reciprocally tuned toward each other as a means of investigating conjectures pertaining to mechanisms underlying content teaching and learning. Yet this approach, even…

Cultural Resources Survey of the Morgan City and Vicinity Hurricane Protection Project.

DTIC Science & Technology

1985-12-30

22 5 RESEARCH DESIGN ...................................... 26 Introduction ..................................... 26 Theoretical... designed to enable the construction or enlargement of protective levees and drainage structures for both the Franklin and Morgan City areas, in St...the larger project area was conducted during May-July, 1985, by R. Christopher Goodwin and Associates, Inc. The research design for this study

Recent theoretical developments and experimental studies pertinent to vortex flow aerodynamics - With a view towards design

NASA Technical Reports Server (NTRS)

Lamar, J. E.; Luckring, J. M.

1978-01-01

A review is presented of recent progress in a research program directed towards the development of an improved vortex-flow technology base. It is pointed out that separation induced vortex-flows from the leading and side edges play an important role in the high angle-of-attack aerodynamic characteristics of a wide range of modern aircraft. In the analysis and design of high-speed aircraft, a detailed knowledge of this type of separation is required, particularly with regard to critical wind loads and the stability and performance at various off-design conditions. A description of analytical methods is presented. The theoretical methods employed are divided into two classes which are dependent upon the underlying aerodynamic assumptions. One conical flow method is considered along with three different nonconical flow methods. Comparisons are conducted between the described methods and available aerodynamic data. Attention is also given to a vortex flow drag study and a vortex flow wing design using suction analogy.

Vortex Flow Aerodynamics, volume 1

NASA Technical Reports Server (NTRS)

Campbell, J. F. (Editor); Osborn, R. F. (Editor); Foughner, J. T., Jr. (Editor)

1986-01-01

Vortex modeling techniques and experimental studies of research configurations utilizing vortex flows are discussed. Also discussed are vortex flap investigations using generic and airplane research models and vortex flap theoretical analysis and design studies.

Strengthening the Link between Theory and Practice in Teaching Design Engineering: An Empirical Study on a New Approach

ERIC Educational Resources Information Center

Tempelman, E.; Pilot, A.

2011-01-01

In 2007, the Faculty of Industrial Design Engineering of the Delft University of Technology introduced a new bachelor program. Based on theories of learning and instruction three design principles were used to develop an approach that aims to make it easier for students to bridge the gap between theoretical design engineering courses and practical…

The Effectiveness of Teaching Methods Used in Graphic Design Pedagogy in Both Analogue and Digital Education Systems

ERIC Educational Resources Information Center

Alhajri, Salman

2016-01-01

Purpose: this paper investigates the effectiveness of teaching methods used in graphic design pedagogy in both analogue and digital education systems. Methodology and approach: the paper is based on theoretical study using a qualitative, case study approach. Comparison between the digital teaching methods and traditional teaching methods was…

Design 2000: Theory-Based Design Models of the Future.

ERIC Educational Resources Information Center

Richey, Rita C.

The influence of theory on instructional-design models of the future is explored on the basis of the theoretical developments of today. Anticipated model changes are expected to result from disparate theoretical thinking in areas such as chaos theory, constructivism, situated learning, cognitive-learning theory, and general systems theory.…

What are science teacher's ideas about the universe?

NASA Astrophysics Data System (ADS)

Novotný, Jan; Svobodová, Jindřiška

2017-01-01

The new cosmological discoveries over the past two decades have a great impact on physics. We have prepared a new university course The Introduction to Cosmology available for students without deeper math background. The results of research study and the cosmology lecturers' experiences in two years are presented. We have prepared a questionnaire and the case study to find out how students think about the Universe, how they can accept cosmology theoretical ideas. Then we use it for design follow-up activities that help students to improve their understanding. We have observed the students' views on the presented science concept and on the nature of scientific knowledge. We have prepared a questionnaire to find out how students can accept theoretical ideas. This survey was designed especially for future and contemporary science teachers. Then we use the obtained results for design follow-up activities that help students to improve their understanding. Finally the most frequented cosmology misconceptions are discussed.

Insight into the C-F bond mechanism of molecular analogs for antibacterial drug design.

PubMed

Liu, Junna; Lv, Biyu; Liu, Huaqing; Li, Xin; Yin, Weiping

2018-06-01

The activities of biological molecules usually rely on both of intra-molecular and intermolecular interactions between their function groups. These interactions include interonic attraction theory, Van der Waal's forces and the function of geometry on the individual molecules, whether they are naturally or synthetic. The purpose of this study was to evaluate the antibacterial activity of C-F bond compound using combination of experiments verification and theoretical calculation. We target on the insect natural products from the maggots of Chrysomyis megacephala Fabricius. Based on density functional theory(DFT) and B3LYP method, a theoretical study of the C-F bond on fluoride was designed to explore compounds 2 and 4 antibacterial structure-activity relationship. With the progress in DFT, first-principle calculation based on DFT has gradually become a routine method for drug design, quantum chemistry and other science fields.

Optimum design for effective water transport through a double-layered porous hydrogel inspired by plant leaves

NASA Astrophysics Data System (ADS)

Kim, Hyejeong; Kim, Hyeonjeong; Huh, Hyungkyu; Hwang, Hyung Ju; Lee, Sang Joon

2014-11-01

Plant leaves are generally known to have optimized morphological structure in response to environmental changes for efficient water usage. However, the advantageous features of plant leaves are not fully utilized in engineering fields yet, since the optimum design in internal structure of plant leaves is unclear. In this study, the tissue organization of the hydraulic pathways inside plant leaves was investigated. Water transport through double-layered porous hydrogel models analogous to mesophyll cells was experimentally observed. In addition, computational experiment and theoretical analysis were applied to the model systems to find the optimal design for efficient water transport. As a result, the models with lower porosity or with pores distributed widely in the structure exhibit efficient mass transport. Our theoretical prediction supports that structural features of plant leaves guarantee sufficient water supply as survival strategy. This study may provide a new framework for investigating the biophysical principles governing the morphological optimization of plant leaves and for designing microfluidic devices to enhance mass transport ability. This study was supported by the National Research Foundation of Korea and funded by the Korean government.

Cost-benefit study of consumer product take-back programs using IBM's WIT reverse logistics optimization tool

NASA Astrophysics Data System (ADS)

Veerakamolmal, Pitipong; Lee, Yung-Joon; Fasano, J. P.; Hale, Rhea; Jacques, Mary

2002-02-01

In recent years, there has been increased focus by regulators, manufacturers, and consumers on the issue of product end of life management for electronics. This paper presents an overview of a conceptual study designed to examine the costs and benefits of several different Product Take Back (PTB) scenarios for used electronics equipment. The study utilized a reverse logistics supply chain model to examine the effects of several different factors in PTB programs. The model was done using the IBM supply chain optimization tool known as WIT (Watson Implosion Technology). Using the WIT tool, we were able to determine a theoretical optimal cost scenario for PTB programs. The study was designed to assist IBM internally in determining theoretical optimal Product Take Back program models and determining potential incentives for increasing participation rates.

Theoretical NMR and conformational analysis of solvated oximes for organophosphates-inhibited acetylcholinesterase reactivation

NASA Astrophysics Data System (ADS)

da Silva, Jorge Alberto Valle; Modesto-Costa, Lucas; de Koning, Martijn C.; Borges, Itamar; França, Tanos Celmar Costa

2018-01-01

In this work, quaternary and non-quaternary oximes designed to bind at the peripheral site of acetylcholinesterase previously inhibited by organophosphates were investigated theoretically. Some of those oximes have a large number of degrees of freedom, thus requiring an accurate method to obtain molecular geometries. For this reason, the density functional theory (DFT) was employed to refine their molecular geometries after conformational analysis and to compare their 1H and 13C nuclear magnetic resonance (NMR) theoretical signals in gas-phase and in solvent. A good agreement with experimental data was achieved and the same theoretical approach was employed to obtain the geometries in water environment for further studies.

Statistical Power for the Comparative Regression Discontinuity Design With a Pretest No-Treatment Control Function: Theory and Evidence From the National Head Start Impact Study.

PubMed

Tang, Yang; Cook, Thomas D

2018-01-01

The basic regression discontinuity design (RDD) has less statistical power than a randomized control trial (RCT) with the same sample size. Adding a no-treatment comparison function to the basic RDD creates a comparative RDD (CRD); and when this function comes from the pretest value of the study outcome, a CRD-Pre design results. We use a within-study comparison (WSC) to examine the power of CRD-Pre relative to both basic RDD and RCT. We first build the theoretical foundation for power in CRD-Pre, then derive the relevant variance formulae, and finally compare them to the theoretical RCT variance. We conclude from this theoretical part of this article that (1) CRD-Pre's power gain depends on the partial correlation between the pretest and posttest measures after conditioning on the assignment variable, (2) CRD-Pre is less responsive than basic RDD to how the assignment variable is distributed and where the cutoff is located, and (3) under a variety of conditions, the efficiency of CRD-Pre is very close to that of the RCT. Data from the National Head Start Impact Study are then used to construct RCT, RDD, and CRD-Pre designs and to compare their power. The empirical results indicate (1) a high level of correspondence between the predicted and obtained power results for RDD and CRD-Pre relative to the RCT, and (2) power levels in CRD-Pre and RCT that are very close. The study is unique among WSCs for its focus on the correspondence between RCT and observational study standard errors rather than means.

An Experimental and Theoretical Study on Cavitating Propellers.

DTIC Science & Technology

1982-10-01

34 And Identfyp eV &to" nMeeJ cascade flow theoretical supercavitating flow performance prediction method partially cavitating flow supercavitating ...the present work was to develop an analytical tool for predicting the off-design performance of supercavitating propellers over a wide range of...operating conditions. Due to the complex nature of the flow phenomena, a lifting line theory sirply combined with the two-dimensional supercavitating

Magnetic-Nozzle Studies for Fusion Propulsion Applications: Gigawatt Plasma Source Operation and Magnetic Nozzle Analysis

NASA Technical Reports Server (NTRS)

Gilland, James H.; Mikekkides, Ioannis; Mikellides, Pavlos; Gregorek, Gerald; Marriott, Darin

2004-01-01

This project has been a multiyear effort to assess the feasibility of a key process inherent to virtually all fusion propulsion concepts: the expansion of a fusion-grade plasma through a diverging magnetic field. Current fusion energy research touches on this process only indirectly through studies of plasma divertors designed to remove the fusion products from a reactor. This project was aimed at directly addressing propulsion system issues, without the expense of constructing a fusion reactor. Instead, the program designed, constructed, and operated a facility suitable for simulating fusion reactor grade edge plasmas, and to examine their expansion in an expanding magnetic nozzle. The approach was to create and accelerate a dense (up to l0(exp 20)/m) plasma, stagnate it in a converging magnetic field to convert kinetic energy to thermal energy, and examine the subsequent expansion of the hot (100's eV) plasma in a subsequent magnetic nozzle. Throughout the project, there has been a parallel effort between theoretical and numerical design and modelling of the experiment and the experiment itself. In particular, the MACH2 code was used to design and predict the performance of the magnetoplasmadynamic (MPD) plasma accelerator, and to design and predict the design and expected behavior for the magnetic field coils that could be added later. Progress to date includes the theoretical accelerator design and construction, development of the power and vacuum systems to accommodate the powers and mass flow rates of interest to out research, operation of the accelerator and comparison to theoretical predictions, and computational analysis of future magnetic field coils and the expected performance of an integrated source-nozzle experiment.

Charts for Estimating Tail-rotor Contribution to Helicopter Directional Stability and Control in Low-Speed Flight

NASA Technical Reports Server (NTRS)

Amer, Kenneth B; Gessow, Alfred

1955-01-01

Theoretically derived charts and equations are presented by which tail-rotor design studies of directional trim and control response at low forward speed can be conveniently made. The charts can also be used to obtain the main-rotor stability derivatives of thrust with respect to collective pitch and angle of attack at low forward speeds. The use of the charts and equations for tail-rotor design studies is illustrated. Comparisons between theoretical and experimental results are presented. The charts indicate, and flight tests confirm, that the region of vortex roughness which is familiar for the main rotor is also encountered by the tail rotor and that prolonged operation at the corresponding flight conditions would be difficult.

Theoretical studies of system performance and adaptive optics design parameters

NASA Astrophysics Data System (ADS)

Tyson, Robert K.

1990-08-01

The ultimate performance of an adaptive optics (AO) system can be sensitive to specific design parameters of individual components. The type and configuration of a wavefront sensor or the shape of individual deformable mirror actuator influence functions can have a profound effect on the correctability of the AO system. This paper will discuss the results of a theoretical study which employed both closed form analytic solutions and computer models. A parametric analysis of wavefront sensor characteristics, noise, and subaperture geometry are independently evaluated against system response to an aberrated wave characteristic of atmospheric turbulence. Similarly, the shape and extent of the deformable mirror influence function and the placement and number of actuators is evaluated to characterize the effects of fitting error and coupling.

Long-term radiation effects on GaAs solar cell characteristics

NASA Technical Reports Server (NTRS)

Heinbockel, J. H.; Doviak, M. J.

1978-01-01

This report investigates preliminary design considerations which should be considered for a space experiment involving Gallium Arsenide (GaAs) solar cells. The electron radiation effects on GaAs solar cells were conducted in a laboratory environment, and a statistical analysis of the data is presented. In order to augment the limited laboratory data, a theoretical investigation of the effect of radiation on GaAs solar cells is also developed. The results of this study are empirical prediction equations which can be used to estimate the actual damage of electrical characteristics in a space environment. The experimental and theoretical studies also indicate how GaAs solar cell parameters should be designed in order to withstand the effects of electron radiation damage.

A study of general instability of box beams with truss-type ribs

NASA Technical Reports Server (NTRS)

Lundquist, Eugene E; Schwartz, Edward B

1942-01-01

The design of truss-type ribs for box beams is theoretically treated with regard to the function of the ribs in stabilizing the compression flange. The theory is applied to a design problem, and the results of this application are presented and discussed in relation to the general problem of rib design. The results of some tests made as a part of this general study are presented in an appendix.

Applying Theory to the Design of Cultural Competency Training for Medical Students: A Case Study.

ERIC Educational Resources Information Center

Crandall, Sonia J.; George, Geeta; Marion, Gail S.; Davis, Steve

2003-01-01

Summarizes the current practice of cultural competency training within medical education and describes the design, implementation, and evaluation of a theoretically based, year-long cultural competency training course for second-year students at Wake Forest University School of Medicine. (EV)

Design-Based Research: Case of a Teaching Sequence on Mechanics

ERIC Educational Resources Information Center

Tiberghien, Andree; Vince, Jacques; Gaidioz, Pierre

2009-01-01

Design-based research, and particularly its theoretical status, is a subject of debate in the science education community. In the first part of this paper, a theoretical framework drawn up to develop design-based research will be presented. This framework is mainly based on epistemological analysis of physics modelling, learning and teaching…

Hospital Nurses' Work Environment Characteristics and Patient Safety Outcomes: A Literature Review.

PubMed

Lee, Seung Eun; Scott, Linda D

2018-01-01

This integrative literature review assesses the relationship between hospital nurses' work environment characteristics and patient safety outcomes and recommends directions for future research based on examination of the literature. Using an electronic search of five databases, 18 studies published in English between 1999 and 2016 were identified for review. All but one study used a cross-sectional design, and only four used a conceptual/theoretical framework to guide the research. No definition of work environment was provided in most studies. Differing variables and instruments were used to measure patient outcomes, and findings regarding the effects of work environment on patient outcomes were inconsistent. To clarify the relationship between nurses' work environment characteristics and patient safety outcomes, researchers should consider using a longitudinal study design, using a theoretical foundation, and providing clear operational definitions of concepts. Moreover, given the inconsistent findings of previous studies, they should choose their measurement methodologies with care.

Virtual deposition plant

NASA Astrophysics Data System (ADS)

Tikhonravov, Alexander

2005-09-01

A general structure of the software for computational manufacturing experiments is discussed. It is shown that computational experiments can be useful for checking feasibility properties of theoretical designs and for finding the most practical theoretical design for a given production environment.

Viscoelastic Response Of A Highly Filled Polymer

NASA Technical Reports Server (NTRS)

Peng, Steven T. J.; Landel, Robert F.

1992-01-01

Report describes experimental and theoretical studies of nonlinear viscoelastic response of elastomeric binder material filled with small particles of different material. Studies characterize response with sufficient accuracy for use in designing parts subjected to high strains.

Decoding the "CoDe": A Framework for Conceptualizing and Designing Help Options in Computer-Based Second Language Listening

ERIC Educational Resources Information Center

Cardenas-Claros, Monica Stella; Gruba, Paul A.

2013-01-01

This paper proposes a theoretical framework for the conceptualization and design of help options in computer-based second language (L2) listening. Based on four empirical studies, it aims at clarifying both conceptualization and design (CoDe) components. The elements of conceptualization consist of a novel four-part classification of help options:…

A Praxeological Perspective for the Design and Implementation of a Digital Role-Play Game

ERIC Educational Resources Information Center

Sanchez, Eric; Monod-Ansaldi, Réjane; Vincent, Caroline; Safadi-Katouzian, Sina

2017-01-01

This paper draws on an empirical work dedicated to discussing a theoretical model for design-based research. The context of our study is a research project for the design, the implementation and the analysis of Insectophagia, a digital role-play game implemented in secondary schools. The model presented in this paper aims at conceptualizing…

Adventure Learning and Learner-Engagement: Frameworks for Designers and Educators

ERIC Educational Resources Information Center

Henrickson, Jeni; Doering, Aaron

2013-01-01

There is a recognized need for theoretical frameworks that can guide designers and educators in the development of engagement-rich learning experiences that incorporate emerging technologies in pedagogically sound ways. This study investigated one such promising framework, adventure learning (AL). Data were gathered via surveys, interviews, direct…

Design-Grounded Assessment: A Framework and a Case Study of Web 2.0 Practices in Higher Education

ERIC Educational Resources Information Center

Ching, Yu-Hui; Hsu, Yu-Chang

2011-01-01

This paper synthesis's three theoretical perspectives, including sociocultural theory, distributed cognition, and situated cognition, into a framework to guide the design and assessment of Web 2.0 practices in higher education. In addition, this paper presents a case study of Web 2.0 practices. Thirty-seven online graduate students participated in…

A Design Study for an Italian Fifth Grade Class Following Davydov Traces

ERIC Educational Resources Information Center

Mellone, Maria; Tortora, Roberto

2017-01-01

We present a design study developed in an Italian school. Taking inspiration from the work of the Russian psychologist V. V. Davydov, we have reformulated some activities of his curriculum for the first grade, in order to adapt them to a didactic project for a fifth grade class. In the paper we firstly expose our theoretical assumptions and the…

Prosthetic leg powered by MR brake and SMA wires

NASA Astrophysics Data System (ADS)

Nguyen, The; Munguia, Vicente; Calderon, Jose

2014-04-01

Current knee designs for prosthetic legs rely on electric motors for both moving and stationary states. The electric motors draw an especially high level of current to sustain a fixed position. The advantage of using magnetorheological (MR) fluid is that it requires less current and can have a variable braking torque. Besides, the proposed prosthetic leg is actuated by NiTinol wire, a popular shape memory alloy (SMA). The incorporation of NiTinol gives the leg more realistic weight distribution with appropriate arrangement of the batteries and wires. The prosthesis in this research was designed with MR brake as stopping component and SMA wire network as actuating component at the knee. The MR brake was designed with novel non-circular shape for the rotor that improved the braking torque while minimizing the power consumption. The design also helped simplify the control of braking process. The SMA wire network was design so that the knee motion was actively rotated in both directions. The SMA wires were arranged and played very similar role as the leg's muscles. The study started with the overall solid design of the knee including both MR and SMA parts. Theoretical models were derived and programmed in Simulink for both components. The simulation was capable of predicting the power required for moving the leg or hold it in a fixed position for a certain amount of time. Subsequently, the design was prototyped and tested to validate the theoretical prediction. The theoretical models were updated accordingly to correlate with the experimental data.

Thinking meta-theoretically about the role of internalization in the development of body dissatisfaction and body change behaviors.

PubMed

Karazsia, Bryan T; van Dulmen, Manfred H M; Wong, Kendal; Crowther, Janis H

2013-09-01

Internalization of societal standards of physical attractiveness (i.e., internalization of the thin ideal for women and internalization of the mesomorphic ideal for men) is a widely studied and robust risk factor for body dissatisfaction and maladaptive body change behaviors. Substantial empirical research supports internalization as both a mediator and a moderator of the relation between societal influences and body dissatisfaction. In this paper, a primer on mediation and moderation is followed by a review of literature and discussion of the extent to which internalization can theoretically fulfill the roles of both mediation and moderation. The literature review revealed a stark contrast in research design (experimental versus non-experimental design) when alternate conceptualizations of internalization are adopted. A meta-theoretical, moderated mediation model is presented. This model integrates previous research and can inform future empirical and clinical endeavors. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Role of Theory in Increasing Adherence to Prescribed Practice

PubMed Central

Richardson, Julie; Wishart, Laurie; Hanna, Steven

2009-01-01

ABSTRACT Purpose: The purpose of this article is to apply theoretical frameworks to adherence behaviour and to guide the development of an intervention to increase adherence to prescribed home programmes. Summary of Key Points: Delivering an effective intervention requires establishing one that is evidence based and of adequate dosage. Two-thirds of patients who receive home exercise prescriptions do not adhere to their home programme, which may contribute to their physiotherapy's being ineffective. The mediating concepts of self-efficacy (SE) and outcome expectations (OE) are common to the five relevant theories used to explain adherence to exercise: the health belief model, protection motivation theory, theory of reasoned action, theory of planned behaviour, and social cognitive theory. Conclusion/Recommendations: Few intervention studies with any theoretical underpinning have examined adherence to exercise. Even fewer have been designed to affect and measure change in the theoretical mediators of SE and OE in patient populations. Physiotherapists must consider increasing adherence as a component of effective physiotherapy. Ongoing research is needed to increase our understanding of adherence to prescribed home programmes and to design interventions to affect theoretical mediators for increasing adherence. PMID:20190989

Pressure variation of developed lapping tool on surface roughness

NASA Astrophysics Data System (ADS)

Hussain, A. K.; Lee, K. Q.; Aung, L. M.; Abu, A.; Tan, L. K.; Kang, H. S.

2018-01-01

Improving the surface roughness is always one of the major concerns in the development of lapping process as high precision machining caters a great demand in manufacturing process. This paper aims to investigate the performance of a newly designed lapping tool in term of surface roughness. Polypropylene is used as the lapping tool head. The lapping tool is tested for different pressure to identify the optimum working pressure for lapping process. The theoretical surface roughness is also calculated using Vickers Hardness. The present study shows that polypropylene is able to produce good quality and smooth surface roughness. The optimum lapping pressure in the present study is found to be 45 MPa. By comparing the theoretical and experimental values, the present study shows that the newly designed lapping tool is capable to produce finer surface roughness.

Measuring metacognitive ability based on science literacy in dynamic electricity topic

NASA Astrophysics Data System (ADS)

Warni; Sunyono; Rosidin

2018-01-01

This study aims to produce an instrument of metacognition ability assessment based on science literacy on theoretically and empirically feasible dynamic electrical material. The feasibility of the assessment instrument includes theoretical validity on material, construction, and language aspects, as well as empirical validity, reliability, difficulty, distinguishing, and distractor indices. The development of assessment instruments refers to the Dick and Carey development model which includes the preliminary study stage, initial product development, validation and revision, and piloting. The instrument was tested to 32 students of class IX in SMP Negeri 20 Bandar Lampung, using the design of One Group Pretest-Postest Design. The result shows that the metacognition ability assessment instrument based on science literacy is feasible theoretically with theoretical validity percentage of 95.44% and empirical validity of 43.75% for the high category, 43.75% for the medium category, and 12.50 % for low category questions; Reliability of assessment instruments of 0.83 high categories; Difficulty level of difficult item is about 31.25% and medium category is equal to 68.75%. Item that has very good distinguishing power is 12.50%, 62.50% for good stage, and medium category is 25.00%; As well as the duplexing function on a matter of multiple choice is 80.00% including good category and 20.00% for medium category.

A Methodology for Instructional Design in Mathematics--With the Generic and Epistemic Student at the Centre

ERIC Educational Resources Information Center

Strømskag, Heidi

2017-01-01

This theoretical paper presents a methodology for instructional design in mathematics. It is a theoretical analysis of a proposed model for instructional design, where tasks are embedded in situations that preserve meaning with respect to particular pieces of mathematical knowledge. The model is applicable when there is an intention of teaching…

Recent research related to prediction of stall/spin characteristics of fighter aircraft

NASA Technical Reports Server (NTRS)

Nguyen, L. T.; Anglin, E. L.; Gilbert, W. P.

1976-01-01

The NASA Langley Research Center is currently engaged in a stall/spin research program to provide the fundamental information and design guidelines required to predict the stall/spin characteristics of fighter aircraft. The prediction methods under study include theoretical spin prediction techniques and piloted simulation studies. The paper discusses the overall status of theoretical techniques including: (1) input data requirements, (2) math model requirements, and (3) correlation between theoretical and experimental results. The Langley Differential Maneuvering Simulator (DMS) facility has been used to evaluate the spin susceptibility of several current fighters during typical air combat maneuvers and to develop and evaluate the effectiveness of automatic departure/spin prevention concepts. The evaluation procedure is described and some of the more significant results of the studies are presented.

Study into penetration speed during laser cutting of brain tissues.

PubMed

Yilbas, Z; Sami, M; Patiroglu, T

1998-01-01

The applications of CO2 continuous-wave lasers in neurosurgery have become important in recent years. Theoretical considerations of laser applicability in medicine are subsequently confirmed experimentally. To obtain precision operation in the laser cutting process, further theoretical developments and experimental studies need to be conducted. Consequently, in the present study, the heat transfer mechanism taking place during laser-tissue interaction is introduced using Fourier theory. The results obtained from the theoretical model are compared with the experimental results. In connection with this, an experiment is designed to measure the penetration speed during the laser cutting process. The measurement is carried out using an optical method. It is found that both results for the penetration speed obtained from the theory and experiment are in a good agreement.

Problematics of Time and Timing in the Longitudinal Study of Human Development: Theoretical and Methodological Issues

PubMed Central

Lerner, Richard M.; Schwartz, Seth J; Phelps, Erin

2009-01-01

Studying human development involves describing, explaining, and optimizing intraindividual change and interindividual differences in such change and, as such, requires longitudinal research. The selection of the appropriate type of longitudinal design requires selecting the option that best addresses the theoretical questions asked about developmental process and the use of appropriate statistical procedures to best exploit data derived from theory-predicated longitudinal research. This paper focuses on several interrelated problematics involving the treatment of time and the timing of observations that developmental scientists face in creating theory-design fit and in charting in change-sensitive ways developmental processes across life. We discuss ways in which these problematics may be addressed to advance theory-predicated understanding of the role of time in processes of individual development. PMID:19554215

Application of satellite data in observational and theoretical studies of the evolving structure of baroclinic waves

NASA Technical Reports Server (NTRS)

Saltzman, Barry

1987-01-01

A variety of observational and theoretical studies were performed which were designed to clarify the relationship between satellite measurements of cloud and radiation and the evolution of transient and stationary circulation in middle latitudes. Satellite outgoing longwave radiation data are used to: (1) estimate the generation of available potential energy due to infrared radiation, and (2) show the extent to which these data can provide the signature of high and low frequency weather phenomena including blocking. In a significant series of studies the nonlinear, energetical, and predictability properties of these blocking situations, and the ralationship of blocking to the planetary, scale longwave structure are described. These studies form the background for continuing efforts to describe and theoretically account for these low frequency planetary wave phenomena in terms of their bimodal properties.

Damage Tolerance Characterisitics of Composite Sandwich Structures

DTIC Science & Technology

2000-02-01

requirements impose strict test program is devised and carried out, with hundreds of tests at constraints on the design of composite aircraft... design A particular effort was dedicated to the study of delamination methodologies, as well as static and fatigue strength and growth under...partition according to the theoretical tools, the industries are more or less forced, for the fundamental modes. design of primary composite structures

Identifying Complex Cultural Interactions in the Instructional Design Process: A Case Study of a Cross-Border, Cross-Sector Training for Innovation Program

ERIC Educational Resources Information Center

Russell, L. Roxanne; Kinuthia, Wanjira L.; Lokey-Vega, Anissa; Tsang-Kosma, Winnie; Madathany, Reeny

2013-01-01

The purpose of this research is to identify complex cultural dynamics in the instructional design process of a cross-sector, cross-border training environment by applying Young's (2009) Culture-Based Model (CBM) as a theoretical framework and taxonomy for description of the instructional design process under the conditions of one case. This…

The Role of Perceived User-Interface Design in Continued Usage Intention of Self-Paced E-Learning Tools

ERIC Educational Resources Information Center

Cho, Vincent; Cheng, T. C. Edwin; Lai, W. M. Jennifer

2009-01-01

While past studies on user-interface design focused on a particular system or application using the experimental approach, we propose a theoretical model to assess the impact of perceived user-interface design (PUID) on continued usage intention (CUI) of self-paced e-learning tools in general. We argue that the impact of PUID is mediated by two…

Architectural Design Education: Designing a Library, Public Communication and Information Center in the Manufacturing Zone of Central Eskis, Ehir Turkey, a Case Study

ERIC Educational Resources Information Center

Caglar, Nur; Uludag, Zeynep

2006-01-01

It is a fact that architectural design education has become the focus of an extremely complicated set of issues and conscientious debates. Therefore, to extend and challenge educational understanding in architecture it becomes crucial to exchange pedagogical practices. In this article, a specific theoretical approach and teaching methodology,…

Theoretical Foundations of Learning Environments. Second Edition

ERIC Educational Resources Information Center

Jonassen, David, Ed.; Land, Susan, Ed.

2012-01-01

"Theoretical Foundations of Learning Environments" provides students, faculty, and instructional designers with a clear, concise introduction to the major pedagogical and psychological theories and their implications for the design of new learning environments for schools, universities, or corporations. Leading experts describe the most…

Finite Element Analysis of Walking Beam of a New Compound Adjustment Balance Pumping Unit

NASA Astrophysics Data System (ADS)

Wu, Jufei; Wang, Qian; Han, Yunfei

2017-12-01

In this paper, taking the designer of the new compound balance pumping unit beam as our research target, the three-dimensional model is established by Solid Works, the load and the constraint are determined. ANSYS Workbench is used to analyze the tail and the whole of the beam, the stress and deformation are obtained to meet the strength requirements. The finite element simulation and theoretical calculation of the moment of the center axis beam are carried out. The finite element simulation results are compared with the calculated results of the theoretical mechanics model to verify the correctness of the theoretical calculation. Finally, the finite element analysis is consistent with the theoretical calculation results. The theoretical calculation results are preferable, and the bending moment value provides the theoretical reference for the follow-up optimization and research design.

Designing Creative Inter-Disciplinary Science and Art Interventions in Schools: The Case of Write a Science Opera (WASO)

ERIC Educational Resources Information Center

Ben-Horin, Oded; Chappell, Kerry A.; Halstead, Jill; Espeland, Magne

2017-01-01

The goal of this qualitative study is to provide theoretical knowledge and design principles for a creative educational environment characterized by simultaneous study and exploration of science or math, and the arts: Write a Science Opera (WASO). To do so, we used a theory of creativity in education which links collaborative co-creation in…

Institutionalisation in a Newly Created Private University

ERIC Educational Resources Information Center

Hodson, Peter; Connolly, Michael; Younes, Said

2008-01-01

Purpose: The purpose of this paper is to examine the introduction of a quality assurance system in a new, private university in Syria, and considers the extent to which the theoretical model based on institutional theory and isomorphism is reflected in practice. Design/methodology/approach: A five year longitudinal study which reviews the design,…

Navigating the Turbulent Waters of School Reform Guided by Complexity Theory

ERIC Educational Resources Information Center

White, David G.; Levin, James A.

2016-01-01

The goal of this research study has been to develop, implement, and evaluate a school reform design experiment at a continuation high school with low-income, low-performing underrepresented minority students. The complexity sciences served as a theoretical framework for this design experiment. Treating an innovative college preparatory program as…

Using Online Tools for Communication and Collaboration: Understanding Educators' Experiences in an Online Course

ERIC Educational Resources Information Center

Boling, Erica C.; Holan, Erica; Horbatt, Brent; Hough, Mary; Jean-Louis, Jennifer; Khurana, Chesta; Krinsky, Hindi; Spiezio, Christina

2011-01-01

This designed-based research study explored educators' experiences in an online course to better understand how course design and pedagogical delivery can best support student learning. Using the Cognitive Apprenticeship Model (Collins et al., 1987) as a theoretical lens, researchers investigated the following: 1) What methods of instruction, as…

Mathematics: PROJECT DESIGN. Educational Needs, Fresno, 1968, Number 12.

ERIC Educational Resources Information Center

Smart, James R.

This report examines and summarizes the needs in mathematics of the Fresno City school system. The study is one in a series of needs assessment reports for PROJECT DESIGN, an ESEA Title III project administered by the Fresno City Unified School District. Theoretical concepts, rather than computational drill, would be emphasized in the proposed…

Panoramic lens designed with transformation optics.

PubMed

Wang, Huaping; Deng, Yangyang; Zheng, Bin; Li, Rujiang; Jiang, Yuyu; Dehdashti, Shahram; Xu, Zhiwei; Chen, Hongsheng

2017-01-06

The panoramic lens is a special kind of lens, which is applied to observe full view. In this letter, we theoretically present a panoramic lens (PL) using transformation optics method. The lens is designed with inhomogeneous and anisotropic constitutive parameters, which has the ability to gather light from all directions and confine light within the visual angle of observer. Simulation results validate our theoretical design.

Theoretical approaches of online social network interventions and implications for behavioral change: a systematic review.

PubMed

Arguel, Amaël; Perez-Concha, Oscar; Li, Simon Y W; Lau, Annie Y S

2018-02-01

The aim of this review was to identify general theoretical frameworks used in online social network interventions for behavioral change. To address this research question, a PRISMA-compliant systematic review was conducted. A systematic review (PROSPERO registration number CRD42014007555) was conducted using 3 electronic databases (PsycINFO, Pubmed, and Embase). Four reviewers screened 1788 abstracts. 15 studies were selected according to the eligibility criteria. Randomized controlled trials and controlled studies were assessed using Cochrane Collaboration's "risk-of-bias" tool, and narrative synthesis. Five eligible articles used the social cognitive theory as a framework to develop interventions targeting behavioral change. Other theoretical frameworks were related to the dynamics of social networks, intention models, and community engagement theories. Only one of the studies selected in the review mentioned a well-known theory from the field of health psychology. Conclusions were that guidelines are lacking in the design of online social network interventions for behavioral change. Existing theories and models from health psychology that are traditionally used for in situ behavioral change should be considered when designing online social network interventions in a health care setting. © 2016 John Wiley & Sons, Ltd.

Enhancing implementation of tobacco use prevention and cessation counselling guideline among dental providers: a cluster randomised controlled trial

PubMed Central

2011-01-01

Background Tobacco use adversely affects oral health. Tobacco use prevention and cessation (TUPAC) counselling guidelines recommend that healthcare providers ask about each patient's tobacco use, assess the patient's readiness and willingness to stop, document tobacco use habits, advise the patient to stop, assist and help in quitting, and arrange monitoring of progress at follow-up appointments. Adherence to such guidelines, especially among dental providers, is poor. To improve guideline implementation, it is essential to understand factors influencing it and find effective ways to influence those factors. The aim of the present study protocol is to introduce a theory-based approach to diagnose implementation difficulties of TUPAC counselling guidelines among dental providers. Methods Theories of behaviour change have been used to identify key theoretical domains relevant to the behaviours of healthcare providers involved in implementing clinical guidelines. These theoretical domains will inform the development of a questionnaire aimed at assessing the implementation of the TUPAC counselling guidelines among Finnish municipal dental providers. Specific items will be drawn from the guidelines and the literature on TUPAC studies. After identifying potential implementation difficulties, we will design two interventions using theories of behaviour change to link them with relevant behaviour change techniques aiming to improve guideline adherence. For assessing the implementation of TUPAC guidelines, the electronic dental record audit and self-reported questionnaires will be used. Discussion To improve guideline adherence, the theoretical-domains approach could provide a comprehensive basis for assessing implementation difficulties, as well as designing and evaluating interventions. After having identified implementation difficulties, we will design and test two interventions to enhance TUPAC guideline adherence. Using the cluster randomised controlled design, we aim to provide further evidence on intervention effects, as well as on the validity and feasibility of the theoretical-domain approach. The empirical data collected within this trial will be useful in testing whether this theoretical-domain approach can improve our understanding of the implementation of TUPAC guidelines among dental providers. Trial registration Current Controlled Trials ISRCTN15427433 PMID:21320312

A Design Pattern for Decentralised Decision Making

PubMed Central

Valentini, Gabriele; Fernández-Oto, Cristian; Dorigo, Marco

2015-01-01

The engineering of large-scale decentralised systems requires sound methodologies to guarantee the attainment of the desired macroscopic system-level behaviour given the microscopic individual-level implementation. While a general-purpose methodology is currently out of reach, specific solutions can be given to broad classes of problems by means of well-conceived design patterns. We propose a design pattern for collective decision making grounded on experimental/theoretical studies of the nest-site selection behaviour observed in honeybee swarms (Apis mellifera). The way in which honeybee swarms arrive at consensus is fairly well-understood at the macroscopic level. We provide formal guidelines for the microscopic implementation of collective decisions to quantitatively match the macroscopic predictions. We discuss implementation strategies based on both homogeneous and heterogeneous multiagent systems, and we provide means to deal with spatial and topological factors that have a bearing on the micro-macro link. Finally, we exploit the design pattern in two case studies that showcase the viability of the approach. Besides engineering, such a design pattern can prove useful for a deeper understanding of decision making in natural systems thanks to the inclusion of individual heterogeneities and spatial factors, which are often disregarded in theoretical modelling. PMID:26496359

Human factors in operations design

NASA Technical Reports Server (NTRS)

Chafin, R. L.

1982-01-01

The manner in which organizations develop their organizational structure is considered, taking into account an example in which the environment changes for an older organization. In such cases, it would be preferable to have some theoretical foundation on which to base the restructuring of the organization to meet new environmental needs. A description is given of a theoretic foundation based on the principles of Differentiation/Integration and Procedural/Knowledge based operations. The organizational design principle of Differentiation and Integration has been presented by Lawrence and Lorsch (1969). The differentiation/integration processes are related to the organizational structures presented in studies concerning NASA Deep Space Network (DSN) operations. The principles presented provide valuable tools for analyzing operations organization.

Research on theoretical optimization and experimental verification of minimum resistance hull form based on Rankine source method

NASA Astrophysics Data System (ADS)

Zhang, Bao-Ji; Zhang, Zhu-Xin

2015-09-01

To obtain low resistance and high efficiency energy-saving ship, minimum total resistance hull form design method is studied based on potential flow theory of wave-making resistance and considering the effects of tail viscous separation. With the sum of wave resistance and viscous resistance as objective functions and the parameters of B-Spline function as design variables, mathematical models are built using Nonlinear Programming Method (NLP) ensuring the basic limit of displacement and considering rear viscous separation. We develop ship lines optimization procedures with intellectual property rights. Series60 is used as parent ship in optimization design to obtain improved ship (Series60-1) theoretically. Then drag tests for the improved ship (Series60-1) is made to get the actual minimum total resistance hull form.

Key issues in theoretical and functional pneumatic design

NASA Astrophysics Data System (ADS)

Xu, Z. G.; Yang, D. Y.; Liu, W. M.; Liu, T. T.

2017-10-01

This paper studies the energy release of the pneumatic engine in different thermodynamic processes, the isothermal process is the highest power output process, while adiabatic process is the lowest energy output process, and the energy release of the pneumatic engine is a multi-state thermodynamic process between them. Therefore heat exchanging should be increased between the pneumatic engine and the outer space, the gas expansion process in the cylinder should be as close as possible to the isothermal process. Heat exchange should be increased between the cylinder and the external spaces. Secondly, the fin structure is studied to increase the heat exchanging between the cylinder body and the outside space. The upper part has fin structures and the lower cylinder has no fin structure, this structure improved the working efficiency of pneumatic engine. Finally the cam and the hydraulic bottle of pneumatic engines are designed. Simulation and theoretical calculation are used to the analysis of the whole structure, which lay the foundation for the manufacturing and design of the pneumatic engines.

Theoretical studies on effective metal-to-ligand charge transfer characteristics of novel ruthenium dyes for dye sensitized solar cells.

PubMed

Wang, Huei-Tang; Taufany, Fadlilatul; Nachimuthu, Santhanamoorthi; Jiang, Jyh-Chiang

2014-05-01

The development of ruthenium dye-sensitizers with highly effective metal-to-ligand charge transfer (MLCT) characteristics and narrowed transition energy gaps are essential for the new generation of dye-sensitized solar cells. Here, we designed a novel anchoring ligand by inserting the cyanovinyl-branches inside the anchoring ligands of selected highly efficient dye-sensitizers and studied their intrinsic optical properties using theoretical methods. Our calculated results show that the designed ruthenium dyes provide good performances as sensitizers compared to the selected efficient dyes, because of their red-shift in the UV-visible absorption spectra with an increase in the absorption intensity, smaller energy gaps and thereby enhancing MLCT transitions. We found that, the designed anchoring ligand acts as an efficient "electron-acceptor" which boosts electron-transfer from a -NCS ligand to this ligand via a Ru-bridge, thus providing a way to lower the transition energy gap and enhance the MLCT transitions.

Optimal design study of high efficiency indium phosphide space solar cells

NASA Technical Reports Server (NTRS)

Jain, Raj K.; Flood, Dennis J.

1990-01-01

Recently indium phosphide solar cells have achieved beginning of life AMO efficiencies in excess of 19 pct. at 25 C. The high efficiency prospects along with superb radiation tolerance make indium phosphide a leading material for space power requirements. To achieve cost effectiveness, practical cell efficiencies have to be raised to near theoretical limits and thin film indium phosphide cells need to be developed. The optimal design study is described of high efficiency indium phosphide solar cells for space power applications using the PC-1D computer program. It is shown that cells with efficiencies over 22 pct. AMO at 25 C could be fabricated by achieving proper material and process parameters. It is observed that further improvements in cell material and process parameters could lead to experimental cell efficiencies near theoretical limits. The effect of various emitter and base parameters on cell performance was studied.

Effect of Chamber Pressurization Rate on Combustion and Propagation of Solid Propellant Cracks

NASA Astrophysics Data System (ADS)

Yuan, Wei-Lan; Wei, Shen; Yuan, Shu-Shen

2002-01-01

area of the propellant grain satisfies the designed value. But cracks in propellant grain can be generated during manufacture, storage, handing and so on. The cracks can provide additional surface area for combustion. The additional combustion may significantly deviate the performance of the rocket motor from the designed conditions, even lead to explosive catastrophe. Therefore a thorough study on the combustion, propagation and fracture of solid propellant cracks must be conducted. This paper takes an isolated propellant crack as the object and studies the effect of chamber pressurization rate on the combustion, propagation and fracture of the crack by experiment and theoretical calculation. deformable, the burning inside a solid propellant crack is a coupling of solid mechanics and combustion dynamics. In this paper, a theoretical model describing the combustion, propagation and fracture of the crack was formulated and solved numerically. The interaction of structural deformation and combustion process was included in the theoretical model. The conservation equations for compressible fluid flow, the equation of state for perfect gas, the heat conducting equation for the solid-phase, constitutive equation for propellant, J-integral fracture criterion and so on are used in the model. The convective burning inside the crack and the propagation and fracture of the crack were numerically studied by solving the set of nonlinear, inhomogeneous gas-phase governing equations and solid-phase equations. On the other hand, the combustion experiments for propellant specimens with a precut crack were conducted by RTR system. Predicted results are in good agreement with experimental data, which validates the reasonableness of the theoretical model. Both theoretical and experimental results indicate that the chamber pressurization rate has strong effects on the convective burning in the crack, crack fracture initiation and fracture pattern.

Design and characterization of molecular nonlinear optical switches.

PubMed

Castet, Frédéric; Rodriguez, Vincent; Pozzo, Jean-Luc; Ducasse, Laurent; Plaquet, Aurélie; Champagne, Benoît

2013-11-19

Nanoscale structures, including molecules, supramolecules, polymers, functionalized surfaces, and crystalline/amorphous solids, can commute between two or more forms, displaying contrasts in their nonlinear optical (NLO) properties. Because of this property, they have high potential for applications in data storage, signal processing, and sensing. As potential candidates for integration into responsive materials, scientists have been intensely studying organic and organometallic molecules with switchable first hyperpolarizability over the past two decades. As a result of this, researchers have been able to synthesize and characterize several families of molecular NLO switches that differ by the stimulus used to trigger the commutation. These stimuli can include light irradiation, pH variation, redox reaction, and ion recognition, among others. The design of multistate (including several switchable units) and multifunctional (triggered with different stimuli) systems has also motivated a large amount of work, aiming at the improvement of the storage capacity of optical memories or the diversification of the addressability of the devices. In complement to the synthesis of the compounds and the characterization of their NLO responses by means of hyper-Rayleigh scattering, quantum chemical calculations play a key role in the design of molecular switches with high first hyperpolarizability contrasts. Through the latter, we can gain a fundamental understanding of the various factors governing the efficiency of the switches. These are not easily accessible experimentally, and include donor/acceptor contributions, frequency dispersion, and solvent effects. In this Account, we illustrate the similarities of the experimental and theoretical tools to design and characterize highly efficient NLO switches but also the difficulties in comparing them. After providing a critical overview of the different theoretical approaches used for evaluating the first hyperpolarizabilities, we report two case studies in which theoretical simulations have provided guidelines to design NLO switches with improved efficiencies. The first example presents the joint theoretical/experimental characterization of a new family of multi-addressable NLO switches based on benzazolo-oxazolidine derivatives. The second focuses on the photoinduced commutation in merocyanine-spiropyran systems, where the significant NLO contrast could be exploited for metal cation identification in a new generation of multiusage sensing devices. Finally, we illustrate the impact of environment on the NLO switching properties, with examples based on the keto-enol equilibrium in anil derivatives. Through these representative examples, we demonstrate that the rational design of molecular NLO switches, which combines experimental and theoretical approaches, has reached maturity. Future challenges consist in extending the investigated objects to supramolecular architectures involving several NLO-responsive units, in order to exploit their cooperative effects for enhancing the NLO responses and contrasts.

Formulating a Theoretical Framework for Assessing Network Loads for Effective Deployment in Network-Centric Operations and Warfare

DTIC Science & Technology

2008-11-01

is particularly important in order to design a network that is realistically deployable. The goal of this project is the design of a theoretical ... framework to assess and predict the effectiveness and performance of networks and their loads.

Studies in Wave-Material Interaction and Design of Composite Materials

DTIC Science & Technology

1990-08-10

to Coating Design In two- and four- flux models of radiative transfer theory, the scattering coefficients or efficiencies of non -emitting media are...0, (5b) rangement of problem 1 acts somewhat like a beam splitter ; with CL and C? being the transmission coefficients. an incident LCP (RCP) plane...This contract supports theoretical research in "Wave Material Interaction and Design of Composite Materials: and is complemented by ongoing

Designing effective human-automation-plant interfaces: a control-theoretic perspective.

PubMed

Jamieson, Greg A; Vicente, Kim J

2005-01-01

In this article, we propose the application of a control-theoretic framework to human-automation interaction. The framework consists of a set of conceptual distinctions that should be respected in automation research and design. We demonstrate how existing automation interface designs in some nuclear plants fail to recognize these distinctions. We further show the value of the approach by applying it to modes of automation. The design guidelines that have been proposed in the automation literature are evaluated from the perspective of the framework. This comparison shows that the framework reveals insights that are frequently overlooked in this literature. A new set of design guidelines is introduced that builds upon the contributions of previous research and draws complementary insights from the control-theoretic framework. The result is a coherent and systematic approach to the design of human-automation-plant interfaces that will yield more concrete design criteria and a broader set of design tools. Applications of this research include improving the effectiveness of human-automation interaction design and the relevance of human-automation interaction research.

Combining Users’ Needs With Health Behavior Models in Designing an Internet- and Mobile-Based Intervention for Physical Activity in Cardiac Rehabilitation

PubMed Central

2014-01-01

Background Internet-based physical activity interventions have great potential in supporting patients in cardiac rehabilitation. Health behavior change theories and user input are identified as important contributors in the effectiveness of the interventions, but they are rarely combined in a systematic way in the design of the interventions. Objective The aim of this study is to identify the appropriate theoretical framework, along with the needs of the users of a physical activity intervention for cardiac rehabilitation, and to combine them into an effective Internet- and mobile-based intervention. Methods We explain the theoretical framework of the intervention in a narrative overview of the existing health behavior change literature as it applies to physical activity. We also conducted a focus group with 11 participants of a cardiac rehabilitation program and used thematic analysis to identify and analyze patterns of meaning in the transcribed data. Results We chose stage-based approaches, specifically the transtheoretical model and the health action process approach as our main framework for tailoring, supplemented with other theoretical concepts such as regulatory focus within the appropriate stages. From the thematic analysis of the focus group data, we identified seven themes: (1) social, (2) motivation, (3) integration into everyday life, (4) information, (5) planning, (6) monitoring and feedback, and (7) concerns and potential problems. The final design of the intervention was based on both the theoretical review and the user input, and it is explained in detail. Conclusions We applied a combination of health behavioral theory and user input in designing our intervention. We think this is a promising design approach with the potential to combine the high efficacy of theory-based interventions with the higher perceived usefulness of interventions designed according to user input. Trial Registration Clinicaltrials.gov NCT01223170; http://clinicaltrials.gov/show/NCT01223170 (Archived by WebCite at http://www.webcitation.org/6M5FqT9Q2). PMID:24413185

The problem with the phrase women and minorities: intersectionality-an important theoretical framework for public health.

PubMed

Bowleg, Lisa

2012-07-01

Intersectionality is a theoretical framework that posits that multiple social categories (e.g., race, ethnicity, gender, sexual orientation, socioeconomic status) intersect at the micro level of individual experience to reflect multiple interlocking systems of privilege and oppression at the macro, social-structural level (e.g., racism, sexism, heterosexism). Public health's commitment to social justice makes it a natural fit with intersectionality's focus on multiple historically oppressed populations. Yet despite a plethora of research focused on these populations, public health studies that reflect intersectionality in their theoretical frameworks, designs, analyses, or interpretations are rare. Accordingly, I describe the history and central tenets of intersectionality, address some theoretical and methodological challenges, and highlight the benefits of intersectionality for public health theory, research, and policy.

The Problem With the Phrase Women and Minorities: Intersectionality—an Important Theoretical Framework for Public Health

PubMed Central

2012-01-01

Intersectionality is a theoretical framework that posits that multiple social categories (e.g., race, ethnicity, gender, sexual orientation, socioeconomic status) intersect at the micro level of individual experience to reflect multiple interlocking systems of privilege and oppression at the macro, social-structural level (e.g., racism, sexism, heterosexism). Public health’s commitment to social justice makes it a natural fit with intersectionality’s focus on multiple historically oppressed populations. Yet despite a plethora of research focused on these populations, public health studies that reflect intersectionality in their theoretical frameworks, designs, analyses, or interpretations are rare. Accordingly, I describe the history and central tenets of intersectionality, address some theoretical and methodological challenges, and highlight the benefits of intersectionality for public health theory, research, and policy. PMID:22594719

[Theoretical and methodological uses of research in Social and Human Sciences in Health].

PubMed

Deslandes, Suely Ferreira; Iriart, Jorge Alberto Bernstein

2012-12-01

The current article aims to map and critically reflect on the current theoretical and methodological uses of research in the subfield of social and human sciences in health. A convenience sample was used to select three Brazilian public health journals. Based on a reading of 1,128 abstracts published from 2009 to 2010, 266 articles were selected that presented the empirical base of research stemming from social and human sciences in health. The sample was classified thematically as "theoretical/ methodological reference", "study type/ methodological design", "analytical categories", "data production techniques", and "analytical procedures". We analyze the sample's emic categories, drawing on the authors' literal statements. All the classifications and respective variables were tabulated in Excel. Most of the articles were self-described as qualitative and used more than one data production technique. There was a wide variety of theoretical references, in contrast with the almost total predominance of a single type of data analysis (content analysis). In several cases, important gaps were identified in expounding the study methodology and instrumental use of the qualitative research techniques and methods. However, the review did highlight some new objects of study and innovations in theoretical and methodological approaches.

The role and benefits of accessing primary care patient records during unscheduled care: a systematic review.

PubMed

Bowden, Tom; Coiera, Enrico

2017-09-22

The purpose of this study was to assess the impact of accessing primary care records on unscheduled care. Unscheduled care is typically delivered in hospital Emergency Departments. Studies published to December 2014 reporting on primary care record access during unscheduled care were retrieved. Twenty-two articles met inclusion criteria from a pool of 192. Many shared electronic health records (SEHRs) were large in scale, servicing many millions of patients. Reported utilization rates by clinicians was variable, with rates >20% amongst health management organizations but much lower in nation-scale systems. No study reported on clinical outcomes or patient safety, and no economic studies of SEHR access during unscheduled care were available. Design factors that may affect utilization included consent and access models, SEHR content, and system usability and reliability. Despite their size and expense, SEHRs designed to support unscheduled care have been poorly evaluated, and it is not possible to draw conclusions about any likely benefits associated with their use. Heterogeneity across the systems and the populations they serve make generalization about system design or performance difficult. None of the reviewed studies used a theoretical model to guide evaluation. Value of Information models may be a useful theoretical approach to design evaluation metrics, facilitating comparison across systems in future studies. Well-designed SEHRs should in principle be capable of improving the efficiency, quality and safety of unscheduled care, but at present the evidence for such benefits is weak, largely because it has not been sought.

Experimental and Theoretical Analysis of Sound Absorption Properties of Finely Perforated Wooden Panels.

PubMed

Song, Boqi; Peng, Limin; Fu, Feng; Liu, Meihong; Zhang, Houjiang

2016-11-22

Perforated wooden panels are typically utilized as a resonant sound absorbing material in indoor noise control. In this paper, the absorption properties of wooden panels perforated with tiny holes of 1-3 mm diameter were studied both experimentally and theoretically. The Maa-MPP (micro perforated panels) model and the Maa-Flex model were applied to predict the absorption regularities of finely perforated wooden panels. A relative impedance comparison and full-factorial experiments were carried out to verify the feasibility of the theoretical models. The results showed that the Maa-Flex model obtained good agreement with measured results. Control experiments and measurements of dynamic mechanical properties were carried out to investigate the influence of the wood characteristics. In this study, absorption properties were enhanced by sound-induced vibration. The relationship between the dynamic mechanical properties and the panel mass-spring vibration absorption was revealed. While the absorption effects of wood porous structure were not found, they were demonstrated theoretically by using acoustic wave propagation in a simplified circular pipe with a suddenly changed cross-section model. This work provides experimental and theoretical guidance for perforation parameter design.

Medication competency of nurses according to theoretical and drug calculation online exams: A descriptive correlational study.

PubMed

Sneck, Sami; Saarnio, Reetta; Isola, Arja; Boigu, Risto

2016-01-01

Medication administration is an important task of registered nurses. According to previous studies, nurses lack theoretical knowledge and drug calculation skills and knowledge-based mistakes do occur in clinical practice. Finnish health care organizations started to develop a systematic verification processes for medication competence at the end of the last decade. No studies have yet been made of nurses' theoretical knowledge and drug calculation skills according to these online exams. The aim of this study was to describe the medication competence of Finnish nurses according to theoretical and drug calculation exams. A descriptive correlation design was adopted. Participants and settings All nurses who participated in the online exam in three Finnish hospitals between 1.1.2009 and 31.05.2014 were selected to the study (n=2479). Quantitative methods like Pearson's chi-squared tests, analysis of variance (ANOVA) with post hoc Tukey tests and Pearson's correlation coefficient were used to test the existence of relationships between dependent and independent variables. The majority of nurses mastered the theoretical knowledge needed in medication administration, but 5% of the nurses struggled with passing the drug calculation exam. Theoretical knowledge and drug calculation skills were better in acute care units than in the other units and younger nurses achieved better results in both exams than their older colleagues. The differences found in this study were statistically significant, but not high. Nevertheless, even the tiniest deficiency in theoretical knowledge and drug calculation skills should be focused on. It is important to identify the nurses who struggle in the exams and to plan targeted educational interventions for supporting them. The next step is to study if verification of medication competence has an effect on patient safety. Copyright © 2015 Elsevier Ltd. All rights reserved.

Electric-field-induced spin switch of endohedral dodecahedrane heterodimers H@C20Hn-C20Hn@M (M= Cu, Ag and Au, n = 15, 18, and 19): a theoretical study.

PubMed

Hou, Jianhua; Yang, Zhixiong; Li, Zhiru; Chai, Haoyu; Zhao, Ruiqi

2017-08-01

We designed nine endohedral dodecahedrane heterodimers H@C 20 H n -C 20 H n @M (M = Cu, Ag, and Au, n = 15, 18, and 19) that may act as single-molecule spin switches, and we predicted theoretically that the ground states of the dimmers shift from low-spin states (S = 0) to the high-spin states (S = 1) under an external electric field applied parallel or perpendicular to the molecular symmetry axes, consisting well with the analyses of Stark effect. Molecular orbitals analyses provide an intuitive insight into the spin crossover behavior. This study expands the application of endohedral chemistry and provides new molecules for designing single-molecule spin switch.

Toward a domain theory in English as a second language.

PubMed

Strong-Krause, Diane

2009-01-01

This paper demonstrates how domain theory development is enhanced by using both theoretical data and empirical data. The study explored the domain of speaking English as a second language (ESL) comparing hypothetical data on speaking tasks provided by an experienced teacher and by a certified ACTFL oral proficiency interview rater with observed data from scores on a computer-delivered speaking exam. While the hypothetical data and observed data showed similar patterns in task difficulty in general, some tasks were identified as being much easier or harder than expected. These differences raise questions not only about test task design but also about the theoretical underpinnings of the domain. The results of the study suggest that this approach, where theory and data are examined together, will improve test design as well as benefit domain theory development.

Theoretical analysis, design and development of a 27-MHz folded loop antenna as a potential applicator in hyperthermia treatment.

PubMed

Kouloulias, Vassilis; Karanasiou, Irene; Giamalaki, Melina; Matsopoulos, George; Kouvaris, John; Kelekis, Nikolaos; Uzunoglu, Nikolaos

2015-02-01

A hyperthermia system using a folded loop antenna applicator at 27 MHz for soft tissue treatment was investigated both theoretically and experimentally to evaluate its clinical value. The electromagnetic analysis of a 27-MHz folded loop antenna for use in human tissue was based on a customised software tool and led to the design and development of the proposed hyperthermia system. The system was experimentally validated using specific absorption rate (SAR) distribution estimations through temperature distribution measurements of a muscle tissue phantom after electromagnetic exposure. Various scenarios for optimal antenna positioning were also performed. Comparison of the theoretical and experimental analysis results shows satisfactory agreement. The SAR level of 50% reaches 8 cm depth in the tissue phantom. Thus, based on the maximum observed SAR values that were of the order of 100 W/kg, the antenna specified is suitable for deep tumour heating. Theoretical and experimental SAR distribution results as derived from this study are in agreement. The proposed folded loop antenna seems appropriate for use in hyperthermia treatment, achieving proper planning and local treatment of deeply seated affected areas and lesions.

New theoretical framework for designing nonionic surfactant mixtures that exhibit a desired adsorption kinetics behavior.

PubMed

Moorkanikkara, Srinivas Nageswaran; Blankschtein, Daniel

2010-12-21

How does one design a surfactant mixture using a set of available surfactants such that it exhibits a desired adsorption kinetics behavior? The traditional approach used to address this design problem involves conducting trial-and-error experiments with specific surfactant mixtures. This approach is typically time-consuming and resource-intensive and becomes increasingly challenging when the number of surfactants that can be mixed increases. In this article, we propose a new theoretical framework to identify a surfactant mixture that most closely meets a desired adsorption kinetics behavior. Specifically, the new theoretical framework involves (a) formulating the surfactant mixture design problem as an optimization problem using an adsorption kinetics model and (b) solving the optimization problem using a commercial optimization package. The proposed framework aims to identify the surfactant mixture that most closely satisfies the desired adsorption kinetics behavior subject to the predictive capabilities of the chosen adsorption kinetics model. Experiments can then be conducted at the identified surfactant mixture condition to validate the predictions. We demonstrate the reliability and effectiveness of the proposed theoretical framework through a realistic case study by identifying a nonionic surfactant mixture consisting of up to four alkyl poly(ethylene oxide) surfactants (C(10)E(4), C(12)E(5), C(12)E(6), and C(10)E(8)) such that it most closely exhibits a desired dynamic surface tension (DST) profile. Specifically, we use the Mulqueen-Stebe-Blankschtein (MSB) adsorption kinetics model (Mulqueen, M.; Stebe, K. J.; Blankschtein, D. Langmuir 2001, 17, 5196-5207) to formulate the optimization problem as well as the SNOPT commercial optimization solver to identify a surfactant mixture consisting of these four surfactants that most closely exhibits the desired DST profile. Finally, we compare the experimental DST profile measured at the surfactant mixture condition identified by the new theoretical framework with the desired DST profile and find good agreement between the two profiles.

Theories of behaviour change synthesised into a set of theoretical groupings: introducing a thematic series on the theoretical domains framework.

PubMed

Francis, Jill J; O'Connor, Denise; Curran, Janet

2012-04-24

Behaviour change is key to increasing the uptake of evidence into healthcare practice. Designing behaviour-change interventions first requires problem analysis, ideally informed by theory. Yet the large number of partly overlapping theories of behaviour makes it difficult to select the most appropriate theory. The need for an overarching theoretical framework of behaviour change was addressed in research in which 128 explanatory constructs from 33 theories of behaviour were identified and grouped. The resulting Theoretical Domains Framework (TDF) appears to be a helpful basis for investigating implementation problems. Research groups in several countries have conducted TDF-based studies. It seems timely to bring together the experience of these teams in a thematic series to demonstrate further applications and to report key developments. This overview article describes the TDF, provides a brief critique of the framework, and introduces this thematic series.In a brief review to assess the extent of TDF-based research, we identified 133 papers that cite the framework. Of these, 17 used the TDF as the basis for empirical studies to explore health professionals' behaviour. The identified papers provide evidence of the impact of the TDF on implementation research. Two major strengths of the framework are its theoretical coverage and its capacity to elicit beliefs that could signify key mediators of behaviour change. The TDF provides a useful conceptual basis for assessing implementation problems, designing interventions to enhance healthcare practice, and understanding behaviour-change processes. We discuss limitations and research challenges and introduce papers in this series.

Theories of behaviour change synthesised into a set of theoretical groupings: introducing a thematic series on the theoretical domains framework

PubMed Central

2012-01-01

Behaviour change is key to increasing the uptake of evidence into healthcare practice. Designing behaviour-change interventions first requires problem analysis, ideally informed by theory. Yet the large number of partly overlapping theories of behaviour makes it difficult to select the most appropriate theory. The need for an overarching theoretical framework of behaviour change was addressed in research in which 128 explanatory constructs from 33 theories of behaviour were identified and grouped. The resulting Theoretical Domains Framework (TDF) appears to be a helpful basis for investigating implementation problems. Research groups in several countries have conducted TDF-based studies. It seems timely to bring together the experience of these teams in a thematic series to demonstrate further applications and to report key developments. This overview article describes the TDF, provides a brief critique of the framework, and introduces this thematic series. In a brief review to assess the extent of TDF-based research, we identified 133 papers that cite the framework. Of these, 17 used the TDF as the basis for empirical studies to explore health professionals’ behaviour. The identified papers provide evidence of the impact of the TDF on implementation research. Two major strengths of the framework are its theoretical coverage and its capacity to elicit beliefs that could signify key mediators of behaviour change. The TDF provides a useful conceptual basis for assessing implementation problems, designing interventions to enhance healthcare practice, and understanding behaviour-change processes. We discuss limitations and research challenges and introduce papers in this series. PMID:22531601

Instructional Design: Science, Technology, Both, Neither

ERIC Educational Resources Information Center

Gropper, George L.

2017-01-01

What would it take for instructional design to qualify as a bona fide applied discipline? First and foremost, a fundamental requirement is a testable and tested theoretical base. Untested rationales until verified remain in limbo. Secondly, the discipline's applied prescriptions must be demonstrably traceable to the theoretical base once it is…

The Logic of the Theoretical and Practical Products of Design Research

ERIC Educational Resources Information Center

Easterday, Matthew W.; Rees Lewis, Daniel G.; Gerber, Elizabeth M.

2016-01-01

Design research (DR) promises to simultaneously solve practical problems of education and develop theory to guide future interventions. However, educational DR remains paradigmatically underdeveloped, making it difficult to train new researchers, to agree upon what makes a theoretical contribution, and to promise clear outputs to funders--all of…

The Graphics of Communication: Typography--Layout--Design. Third Edition.

ERIC Educational Resources Information Center

Turnbull, Arthur T.; Baird, Russell N.

This book includes detailed explanations of the latest technological innovations as well as discussions of the theoretical bases of visual communication. The six sections of the book focus on the following: the theoretical aspects of graphic communication; the verbal elements of communication; the visual elements of communication; design, the…

Military Design Insights for Online Education Program Evaluation: A Revised Theoretical Construct

ERIC Educational Resources Information Center

Culkin, David T.

2017-01-01

This theoretical development article examines how design methodology currently applied in United States military doctrine can offer insights into the increasingly complex arena of program evaluations of online modes for adult distance education. The article presents key themes that emerge from a multidisciplinary literature review. These themes…

Designing Innovative Learning Environments to Foster Communities of Learners for Students in Initial Vocational Education

ERIC Educational Resources Information Center

Boersma, Annoesjka; ten Dam, Geert; Wardekker, Willem; Volman, Monique

2016-01-01

In this study, the concept of "community of learners" was used to improve initial vocational education. The framework of a 'community of learners for vocational orientation' that we present offers both a theoretical understanding of teaching-learning processes in initial vocational education and heuristics for the design of innovative…

Composing for Affect, Audience, and Identity: Toward a Multidimensional Understanding of Adolescents' Multimodal Composing Goals and Designs

ERIC Educational Resources Information Center

Smith, Blaine E.

2018-01-01

This study examined adolescents' perspectives on their multimodal composing goals and designs when creating digital projects in the context of an English Language Arts class. Sociocultural and social semiotics theoretical frameworks were integrated to understand six 12th grade students' viewpoints when composing three multimodal products--a…

Learning "with" Immigrant Children, Families and Communities: The Imperative of Early Childhood Teacher Education

ERIC Educational Resources Information Center

da Silva Iddings, Ana Christina; Reyes, Iliana

2017-01-01

This article reports on a longitudinal study spanning over 5 years, involving the design and implementation of an early childhood teacher education program model that engages a critical-ecological theoretical approach, a funds of knowledge perspective, and design-based methodology. This project aimed to promote equitable education for all…

Designing and Realization of an Individual Educational Program

ERIC Educational Resources Information Center

Yunusova, Gulnaz R.; Karunas, Ekaterina V.

2016-01-01

Relevance of the issue is caused by the change of a knowledge-oriented educational paradigm into an individual-oriented one. This change means that an individual is the most significant value in the modern process of teaching. The aim of the article is to find a theoretical proof for an individual study program design and test it in pedagogical…

Using Sociocultural Perspectives: The Dynamic Process of Designing and Implementing Class Activities in an Online Japanese Language Course

ERIC Educational Resources Information Center

Shibakawa, Mayumi

2012-01-01

The study documented the dynamic process of designing and implementing instructional interventions in an online course of Japanese language and culture at a two-year college. The results have impact in three distinct areas: pedagogical, theoretical, and methodological. First, the interventions that encouraged student agency with rich…

Teaching Neurophysiology, Neuropharmacology, and Experimental Design Using Animal Models of Psychiatric and Neurological Disorders

ERIC Educational Resources Information Center

Morsink, Maarten C.; Dukers, Danny F.

2009-01-01

Animal models have been widely used for studying the physiology and pharmacology of psychiatric and neurological diseases. The concepts of face, construct, and predictive validity are used as indicators to estimate the extent to which the animal model mimics the disease. Currently, we used these three concepts to design a theoretical assignment to…

Game-Based Learning in Science Education: A Review of Relevant Research

NASA Astrophysics Data System (ADS)

Li, Ming-Chaun; Tsai, Chin-Chung

2013-12-01

The purpose of this study is to review empirical research articles regarding game-based science learning (GBSL) published from 2000 to 2011. Thirty-one articles were identified through the Web of Science and SCOPUS databases. A qualitative content analysis technique was adopted to analyze the research purposes and designs, game design and implementation, theoretical backgrounds and learning foci of these reviewed studies. The theories and models employed by these studies were classified into four theoretical foundations including cognitivism, constructivism, the socio-cultural perspective, and enactivism. The results indicate that cognitivism and constructivism were the major theoretical foundations employed by the GBSL researchers and that the socio-cultural perspective and enactivism are two emerging theoretical paradigms that have started to draw attention from GBSL researchers in recent years. The analysis of the learning foci showed that most of the digital games were utilized to promote scientific knowledge/concept learning, while less than one-third were implemented to facilitate the students' problem-solving skills. Only a few studies explored the GBSL outcomes from the aspects of scientific processes, affect, engagement, and socio-contextual learning. Suggestions are made to extend the current GBSL research to address the affective and socio-contextual aspects of science learning. The roles of digital games as tutor, tool, and tutee for science education are discussed, while the potentials of digital games to bridge science learning between real and virtual worlds, to promote collaborative problem-solving, to provide affective learning environments, and to facilitate science learning for younger students are also addressed.

Real-time feedback on nonverbal clinical communication. Theoretical framework and clinician acceptance of ambient visual design.

PubMed

Hartzler, A L; Patel, R A; Czerwinski, M; Pratt, W; Roseway, A; Chandrasekaran, N; Back, A

2014-01-01

This article is part of the focus theme of Methods of Information in Medicine on "Pervasive Intelligent Technologies for Health". Effective nonverbal communication between patients and clinicians fosters both the delivery of empathic patient-centered care and positive patient outcomes. Although nonverbal skill training is a recognized need, few efforts to enhance patient-clinician communication provide visual feedback on nonverbal aspects of the clinical encounter. We describe a novel approach that uses social signal processing technology (SSP) to capture nonverbal cues in real time and to display ambient visual feedback on control and affiliation--two primary, yet distinct dimensions of interpersonal nonverbal communication. To examine the design and clinician acceptance of ambient visual feedback on nonverbal communication, we 1) formulated a model of relational communication to ground SSP and 2) conducted a formative user study using mixed methods to explore the design of visual feedback. Based on a model of relational communication, we reviewed interpersonal communication research to map nonverbal cues to signals of affiliation and control evidenced in patient-clinician interaction. Corresponding with our formulation of this theoretical framework, we designed ambient real-time visualizations that reflect variations of affiliation and control. To explore clinicians' acceptance of this visual feedback, we conducted a lab study using the Wizard-of-Oz technique to simulate system use with 16 healthcare professionals. We followed up with seven of those participants through interviews to iterate on the design with a revised visualization that addressed emergent design considerations. Ambient visual feedback on non- verbal communication provides a theoretically grounded and acceptable way to provide clinicians with awareness of their nonverbal communication style. We provide implications for the design of such visual feedback that encourages empathic patient-centered communication and include considerations of metaphor, color, size, position, and timing of feedback. Ambient visual feedback from SSP holds promise as an acceptable means for facilitating empathic patient-centered nonverbal communication.

Early Childhood Studies in Israel: Using DAP as a Framework.

ERIC Educational Resources Information Center

Dayan, Yael

2000-01-01

This article describes the evolution of a graduate program in early childhood studies at the Hebrew University of Jerusalem. The training model was designed to enhance sensitivity and responsiveness toward children, and uses developmentally appropriate practices as a theoretical basis. (JPB)

The Impact of the Internet on Students' Enhancement of Cultural Aspects in Design Projects: A Case Study on Interior Design Graduation Projects, University of Dammam, Saudi Arabia

ERIC Educational Resources Information Center

Eldardiry, Dalia H.; Elmoghazy, Zeinab A.

2018-01-01

The paper explores the impact of the internet on students and their enhancement of their Identity and culture in the world of globalization. It is based on two stages; a theoretical background in the literature that provides criteria for examining the issue of the study. Then, the analytical study is done to the collected data. The paper…

The use of theory in qualitative approaches to research: application in end-of-life studies.

PubMed

Wu, Hung-Lan; Volker, Deborah L

2009-12-01

This paper is a report of an analysis of the use of theory in qualitative approaches to research as exemplified in qualitative end-of-life studies. Nurses researchers turn to theory to conceptualize research problems and guide investigations. However, researchers using qualitative approaches do not consistently articulate how theory has been applied, and no clear consensus exists regarding the appropriate application of theory in qualitative studies. A review of qualitative, end-of-life studies is used to illustrate application of theory to study design and findings. A review of theoretical literature was carried out, focusing on definitions and use of theory in qualitative end-of-life studies published in English between 1990 and 2008. The term 'theory' continues to be used in a variety of ways by theorists and researchers. Within the reviewed end-of-life studies, the use of theory included theory creation or provision of a comparative framework for data analysis and interpretation. Implications for nursing. Nurses who conduct qualitative studies should examine the philosophical and theoretical bases of their selected methodological approach, articulate a theoretical framework that fits the phenomenon being studied, and adopt a critical, flexible and creative attitude when applying theory to a study. Theory can be put to several uses in qualitative inquiry and should guide nurse researchers as they develop and implement their studies. Nurse educators who teach qualitative approaches to research should emphasize a variety of ways to incorporate theory in qualitative designs.

1983 AFOSR/AFRPL Chemical Rocket Research Meeting, Abstracts and Agenda. Includes: Abstracts on Advanced Diagnostics of Reacting Flow, 28 February - 3 March 1983, Lancaster, California.

DTIC Science & Technology

1983-02-01

blow-off stability and fractional conversion was evaluated for design of an experimental study of these phenomena. The apparatus designed will be...the development of an array of experimental methods and test strategies designed to unravel a complex process that is very difficult to observe directly...this effort of lead field theoretic analysis as a design basis has made that possible. The experimental phase of the effort has three major

ART/Ada design project, phase 1. Task 2 report: Detailed design

NASA Technical Reports Server (NTRS)

Allen, Bradley P.

1988-01-01

Various issues are studied in the context of the design of an Ada based expert system building tool. Using an existing successful design as a starting point, the impact is analyzed of the Ada language and Ada development methodologies on that design, the Ada system is redesigned, and its performance is analyzed using both complexity-theoretic and empirical techniques. The algorithms specified in the overall design are refined, resolving and documenting any open design issues, identifying each system module, documenting the internal architecture and control logic, and describing the primary data structures involved in the module.

Does Childhood Anxiety Evoke Maternal Control? A Genetically Informed Study

ERIC Educational Resources Information Center

Eley, Thalia C.; Napolitano, Maria; Lau, Jennifer Y. F.; Gregory, Alice M.

2010-01-01

Background: Despite theoretical and empirical support for an association between maternal control and child anxiety, few studies have examined the origins of this association. Furthermore, none use observer-ratings of maternal control within a genetically informative design. This study addressed three questions: 1) do children who experience…

Creating restorative settings: inclusive design considerations

Treesearch

David Kamp

2009-01-01

One of 18 articles inspired by the Meristem 2007 Forum, "Restorative Commons for Community Health." The articles include interviews, case studies, thought pieces, and interdisciplinary theoretical works that explore the relationship between human health and the urban...

Five Faces of Cognition: Theoretical Influences on Approaches to Learning Disabilities.

ERIC Educational Resources Information Center

Hresko, Wayne P.; Reid, D. Kim

1981-01-01

The label "cognitive" has been used to designate five substantially different approaches to the study of learning disabilities: information processing, metacognition, genetic epistemology, cognitive behavior modification, and the specific abilities model. (Author)

A New Design for Survey Feedback

ERIC Educational Resources Information Center

Alderfer, Clayton P.; Holbrook, John

1973-01-01

Presents a theoretical discussion analyzing and explaining the use of group methods in feeding back diagnostic data to organizations, illustrating a new peer group--intergroup model with a study of senior officers at a bank. (Author/JM)

Visual Communication in Web Design - Analyzing Visual Communication in Web Design

NASA Astrophysics Data System (ADS)

Thorlacius, Lisbeth

Web sites are rapidly becoming the preferred media choice for information search, company presentation, shopping, entertainment, education, and social contacts. And along with the various forms of communication that the Web offers the aesthetic aspects have begun to play an increasingly important role. However, studies in the design and the relevance of focusing on the aesthetic aspects in planning and using Web sites have only to a smaller degree been subject of theoretical reflection. For example, Miller (2000), Thorlacius (2001, 2002, 2005), Engholm (2002, 2003), and Beaird (2007) have been contributing to set a beginning agenda that address the aesthetic aspects. On the other hand, there is a considerable amount of literature addressing the theoretical and methodological aspects focusing on the technical and functional aspects. In this context it is the aim of this article to introduce a model for analysis of visual communication on websites.

Theoretical and experimental investigations of sensor location for optimal aeroelastic system state estimation

NASA Technical Reports Server (NTRS)

Liu, G.

1985-01-01

One of the major concerns in the design of an active control system is obtaining the information needed for effective feedback. This involves the combination of sensing and estimation. A sensor location index is defined as the weighted sum of the mean square estimation errors in which the sensor locations can be regarded as estimator design parameters. The design goal is to choose these locations to minimize the sensor location index. The choice of the number of sensors is a tradeoff between the estimation quality based upon the same performance index and the total costs of installing and maintaining extra sensors. An experimental study for choosing the sensor location was conducted on an aeroelastic system. The system modeling which includes the unsteady aerodynamics model developed by Stephen Rock was improved. Experimental results verify the trend of the theoretical predictions of the sensor location index for different sensor locations at various wind speeds.

A Model for Designing Peer-Initiated Activities to Promote Racial Awareness and an Appreciation of Differences.

ERIC Educational Resources Information Center

Mann, Barbara A.; Moser, Rita M.

1991-01-01

Presents a theoretical framework suggesting ways to design peer intervention programs and group existing programs. Suggests criteria for effective racial awareness programs, discussing examples of successful college prejudice activities. Notes diversity education efforts are most successful when based on a theoretical model that recognizes the…

Statistical Learning and Language: An Individual Differences Study

ERIC Educational Resources Information Center

Misyak, Jennifer B.; Christiansen, Morten H.

2012-01-01

Although statistical learning and language have been assumed to be intertwined, this theoretical presupposition has rarely been tested empirically. The present study investigates the relationship between statistical learning and language using a within-subject design embedded in an individual-differences framework. Participants were administered…

A theoretical study of microwave beam absorption by a rectenna, introduction. [solar power satellites

NASA Technical Reports Server (NTRS)

1981-01-01

The conditions required for a large rectenna array (i.e., reference design) to absorb nearly 100% of transmitted energy were studied. Design parameters including element spacing, and the manner in which these affect scatter were formulated. Amplitudes and directions of scatter and development of strategies for mitigation were also investigated. The effects on rectenna behavior of external factors such as weather and aircraft overflights were determined.

A game theoretic controller for a linear time-invariant system with parameter uncertainty and its application to the Space Station

NASA Technical Reports Server (NTRS)

Rhee, Ihnseok; Speyer, Jason L.

1990-01-01

A game theoretic controller is developed for a linear time-invariant system with parameter uncertainties in system and input matrices. The input-output decomposition modeling for the plant uncertainty is adopted. The uncertain dynamic system is represented as an internal feedback loop in which the system is assumed forced by fictitious disturbance caused by the parameter uncertainty. By considering the input and the fictitious disturbance as two noncooperative players, a differential game problem is constructed. It is shown that the resulting time invariant controller stabilizes the uncertain system for a prescribed uncertainty bound. This game theoretic controller is applied to the momentum management and attitude control of the Space Station in the presence of uncertainties in the moments of inertia. Inclusion of the external disturbance torque to the design procedure results in a dynamical feedback controller which consists of conventional PID control and cyclic disturbance rejection filter. It is shown that the game theoretic design, comparing to the LQR design or pole placement design, improves the stability robustness with respect to inertia variations.

Analytical and experimental study of structurally efficient composite hat-stiffened panels loaded in axial compression

NASA Technical Reports Server (NTRS)

Williams, J. G.; Mikulus, M. M., Jr.

1976-01-01

Structural efficiency studies were made to determine the weight saving potential of graphite/epoxy composite structures for compression panel applications. Minimum weight hat-stiffened and open corrugation configurations were synthesized using a nonlinear mathematical programming technique. Selected configurations were built and tested to study local and Euler buckling characteristics. Test results for 23 panels critical in local buckling and six panels critical in Euler buckling are compared with analytical results obtained using the BUCLASP-2 branched plate buckling program. A weight efficiency comparison is made between composite and aluminum compression panels using metal test data generated by the NACA. Theoretical studies indicate that potential weight savings of up to 50% are possible for composite hat-stiffened panels when compared with similar aluminum designs. Weight savings of 32% to 42% were experimentally achieved. Experience suggests that most of the theoretical weight saving potential is available if design deficiencies are eliminated and strict fabrication control is exercised.

Platform construction and extraction mechanism study of magnetic mixed hemimicelles solid-phase extraction

NASA Astrophysics Data System (ADS)

Xiao, Deli; Zhang, Chan; He, Jia; Zeng, Rong; Chen, Rong; He, Hua

2016-12-01

Simple, accurate and high-throughput pretreatment method would facilitate large-scale studies of trace analysis in complex samples. Magnetic mixed hemimicelles solid-phase extraction has the power to become a key pretreatment method in biological, environmental and clinical research. However, lacking of experimental predictability and unsharpness of extraction mechanism limit the development of this promising method. Herein, this work tries to establish theoretical-based experimental designs for extraction of trace analytes from complex samples using magnetic mixed hemimicelles solid-phase extraction. We selected three categories and six sub-types of compounds for systematic comparative study of extraction mechanism, and comprehensively illustrated the roles of different force (hydrophobic interaction, π-π stacking interactions, hydrogen-bonding interaction, electrostatic interaction) for the first time. What’s more, the application guidelines for supporting materials, surfactants and sample matrix were also summarized. The extraction mechanism and platform established in the study render its future promising for foreseeable and efficient pretreatment under theoretical based experimental design for trace analytes from environmental, biological and clinical samples.

Theoretical development and first-principles analysis of strongly correlated systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Chen

A variety of quantum many-body methods have been developed for studying the strongly correlated electron systems. We have also proposed a computationally efficient and accurate approach, named the correlation matrix renormalization (CMR) method, to address the challenges. The initial implementation of the CMR method is designed for molecules which have theoretical advantages, including small size of system, manifest mechanism and strongly correlation effect such as bond breaking process. The theoretic development and benchmark tests of the CMR method are included in this thesis. Meanwhile, ground state total energy is the most important property of electronic calculations. We also investigated anmore » alternative approach to calculate the total energy, and extended this method for magnetic anisotropy energy (MAE) of ferromagnetic materials. In addition, another theoretical tool, dynamical mean- field theory (DMFT) on top of the DFT , has also been used in electronic structure calculations for an Iridium oxide to study the phase transition, which results from an interplay of the d electrons' internal degrees of freedom.« less

Decision-Making under Ambiguity Is Modulated by Visual Framing, but Not by Motor vs. Non-Motor Context. Experiments and an Information-Theoretic Ambiguity Model

PubMed Central

Grau-Moya, Jordi; Ortega, Pedro A.; Braun, Daniel A.

2016-01-01

A number of recent studies have investigated differences in human choice behavior depending on task framing, especially comparing economic decision-making to choice behavior in equivalent sensorimotor tasks. Here we test whether decision-making under ambiguity exhibits effects of task framing in motor vs. non-motor context. In a first experiment, we designed an experience-based urn task with varying degrees of ambiguity and an equivalent motor task where subjects chose between hitting partially occluded targets. In a second experiment, we controlled for the different stimulus design in the two tasks by introducing an urn task with bar stimuli matching those in the motor task. We found ambiguity attitudes to be mainly influenced by stimulus design. In particular, we found that the same subjects tended to be ambiguity-preferring when choosing between ambiguous bar stimuli, but ambiguity-avoiding when choosing between ambiguous urn sample stimuli. In contrast, subjects’ choice pattern was not affected by changing from a target hitting task to a non-motor context when keeping the stimulus design unchanged. In both tasks subjects’ choice behavior was continuously modulated by the degree of ambiguity. We show that this modulation of behavior can be explained by an information-theoretic model of ambiguity that generalizes Bayes-optimal decision-making by combining Bayesian inference with robust decision-making under model uncertainty. Our results demonstrate the benefits of information-theoretic models of decision-making under varying degrees of ambiguity for a given context, but also demonstrate the sensitivity of ambiguity attitudes across contexts that theoretical models struggle to explain. PMID:27124723

Decision-Making under Ambiguity Is Modulated by Visual Framing, but Not by Motor vs. Non-Motor Context. Experiments and an Information-Theoretic Ambiguity Model.

PubMed

Grau-Moya, Jordi; Ortega, Pedro A; Braun, Daniel A

2016-01-01

A number of recent studies have investigated differences in human choice behavior depending on task framing, especially comparing economic decision-making to choice behavior in equivalent sensorimotor tasks. Here we test whether decision-making under ambiguity exhibits effects of task framing in motor vs. non-motor context. In a first experiment, we designed an experience-based urn task with varying degrees of ambiguity and an equivalent motor task where subjects chose between hitting partially occluded targets. In a second experiment, we controlled for the different stimulus design in the two tasks by introducing an urn task with bar stimuli matching those in the motor task. We found ambiguity attitudes to be mainly influenced by stimulus design. In particular, we found that the same subjects tended to be ambiguity-preferring when choosing between ambiguous bar stimuli, but ambiguity-avoiding when choosing between ambiguous urn sample stimuli. In contrast, subjects' choice pattern was not affected by changing from a target hitting task to a non-motor context when keeping the stimulus design unchanged. In both tasks subjects' choice behavior was continuously modulated by the degree of ambiguity. We show that this modulation of behavior can be explained by an information-theoretic model of ambiguity that generalizes Bayes-optimal decision-making by combining Bayesian inference with robust decision-making under model uncertainty. Our results demonstrate the benefits of information-theoretic models of decision-making under varying degrees of ambiguity for a given context, but also demonstrate the sensitivity of ambiguity attitudes across contexts that theoretical models struggle to explain.

Analysis of multimode fiber bundles for endoscopic spectral-domain optical coherence tomography

PubMed Central

Risi, Matthew D.; Makhlouf, Houssine; Rouse, Andrew R.; Gmitro, Arthur F.

2016-01-01

A theoretical analysis of the use of a fiber bundle in spectral-domain optical coherence tomography (OCT) systems is presented. The fiber bundle enables a flexible endoscopic design and provides fast, parallelized acquisition of the OCT data. However, the multimode characteristic of the fibers in the fiber bundle affects the depth sensitivity of the imaging system. A description of light interference in a multimode fiber is presented along with numerical simulations and experimental studies to illustrate the theoretical analysis. PMID:25967012

Theoretical and experimental characterization of the first hyperpolarizability

NASA Astrophysics Data System (ADS)

Perez-Moreno, Javier

We present a theoretical and experimental study of the molecular susceptibilities. The generalized Thomas-Kuhn sum rules are used to characterize the nonlinear response of organic chromophores in terms of fundamental parameters. The nonlinear optical performance of real molecules is evaluated from the calculation of the quantum limits and Hyper-Rayleigh scattering measurements. Different strategies for the enhancement of nonlinear behavior at the molecular and supramolecular level are evaluated and new paradigms for de design of more efficient nonlinear molecules are proposed.

A theoretical formulation of wave-vortex interactions

NASA Technical Reports Server (NTRS)

Wu, J. Z.; Wu, J. M.

1989-01-01

A unified theoretical formulation for wave-vortex interaction, designated the '(omega, Pi) framework,' is presented. Based on the orthogonal decomposition of fluid dynamic interactions, the formulation can be used to study a variety of problems, including the interaction of a longitudinal (acoustic) wave and/or transverse (vortical) wave with a main vortex flow. Moreover, the formulation permits a unified treatment of wave-vortex interaction at various approximate levels, where the normal 'piston' process and tangential 'rubbing' process can be approximated dfferently.

Theoretical Study of Si(x)Ge(y)Li(z)- (x=4-10, y=1-10, z=0-10) Clusters for Designing of Novel Nanostructured Materials to be Utilized as Anodes for Lithium-Ion Batteries

DTIC Science & Technology

2015-03-16

AFRL-OSR-VA-TR-2015-0088 Theoretical Study of Novel Nanostructured Materials for Lithium - Ion Batteries Mario Sanchez-Vazquez CENTRO DE INVESTIGACION...of Novel Nanostructured Materials to Be Utilized as Anodes for Lithium - ion Batteries 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA9550-13-1-0175 5c...as anodes for Lithium - ion batteries Final Report Nancy Perez-Peralta and Mario Sanchez-Vazquez Abstract In order to find out if silicon

Finding myself: a theory on the maturation of spirituality and its influence on behavior during late adolescence.

PubMed

Mason, Deanna M

2014-01-01

This study employed a grounded theory research design to develop a theoretical model focused on the maturation of spirituality and its influence on behavior during late adolescence. Quantitative research studies have linked spirituality with decreased health-risk behaviors and increased health-promotion behaviors during late adolescence. Qualitative, theoretical data is proposed to discover the underlying reasons this relationship exists and increase the ability to apply this knowledge to practice. Twenty-one adolescents, age 16-21 years, were e-mail interviewed and transcripts analyzed using a conceptual lens of Blumer's symbolic interactionism. From this analysis, a theoretical model emerged with the core concept, finding myself that represents 5 core process concepts. Implications of this study illustrate that late adolescents are aware of their personal spiritual maturation as well as its influence on behavior. In addition, a distinction between the generic concept of spirituality, personal spirituality, and religion emerged.

Heteroatom-bridged benzothiazolyls for organic solar cells: a theoretical study.

PubMed

Chen, Runfeng; Wang, Yang; Chen, Ting; Li, Huanhuan; Zheng, Chunhua; Yuan, Kai; Wang, Zhixiang; Tao, Ye; Zheng, Chao; Huang, Wei

2015-01-15

On the basis of a typical organic photovoltaic (OPV) building block of 4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (DTBT), a series of novel DTBT derivatives were designed following a heteroatom-bridging strategy to take advantage of the diversified interactions between heteroatoms and π-conjugated systems. These heteroatom-bridged DTBTs, whose outer electron-rich thiophene moieties are covalently fastened to the central electron-deficient benzothiadiazole with additional heteroatom bridges, exhibit promising features for OPV applications with rigid molecular structures, properly lain frontier molecular orbitals (FMOs), broad and intense absorption spectra, and adequate charge transport properties, as revealed by systematic theoretical calculations on molecular geometries, FMOs, absorption spectra, and relaxation and reorganization energies. The structure-property relationship investigations show that the mono-/di-heteroatom bridging is effective not only in tuning the rigidity of the molecular geometries but also in adjusting the optoelectronic properties of the resulting materials. Among the studied heteroatoms, the C and Si were found to be the most efficient in designing novel molecules for OPV applications. These theoretical insights may provide a solid basis for experimental synthesis and device investigations of the proposed heteroatom-bridged DTBTs as potential high-performance building blocks for bulk heterojunction OPV molecules.

Overview of the Brooklyn traffic real-time ambient pollutant penetration and environmental dispersion (B-TRAPPED) study: theoretical background and model for design of field experiments.

PubMed

Hahn, Intaek; Wiener, Russell W; Richmond-Bryant, Jennifer; Brixey, Laurie A; Henkle, Stacy W

2009-12-01

The Brooklyn traffic real-time ambient pollutant penetration and environmental dispersion (B-TRAPPED) study was a multidisciplinary field research project that investigated the transport, dispersion, and infiltration processes of traffic emission particulate matter (PM) pollutants in a near-highway urban residential area. The urban PM transport, dispersion, and infiltration processes were described mathematically in a theoretical model that was constructed to develop the experimental objectives of the B-TRAPPED study. In the study, simultaneous and continuous time-series PM concentration and meteorological data collected at multiple outdoor and indoor monitoring locations were used to characterize both temporal and spatial patterns of the PM concentration movements within microscale distances (<500 m) from the highway. Objectives of the study included (1) characterizing the temporal and spatial PM concentration fluctuation and distribution patterns in the urban street canyon; (2) investigating the effects of urban structures such as a tall building or an intersection on the transport and dispersion of PM; (3) studying the influence of meteorological variables on the transport, dispersion, and infiltration processes; (4) characterizing the relationships between the building parameters and the infiltration mechanisms; (5) establishing a cause-and-effect relationship between outdoor-released PM and indoor PM concentrations and identifying the dominant mechanisms involved in the infiltration process; (6) evaluating the effectiveness of a shelter-in-place area for protection against outdoor-released PM pollutants; and (7) understanding the predominant airflow and pollutant dispersion patterns within the neighborhood using wind tunnel and CFD simulations. The 10 papers in this first set of papers presenting the results from the B-TRAPPED study address these objectives. This paper describes the theoretical background and models representing the interrelated processes of transport, dispersion, and infiltration. The theoretical solution for the relationship between the time-dependent indoor PM concentration and the initial PM concentration at the outdoor source was obtained. The theoretical models and solutions helped us to identify important parameters in the processes of transport, dispersion, and infiltration. The B-TRAPPED study field experiments were then designed to investigate these parameters in the hope of better understanding urban PM pollutant behaviors.

Effective techniques in healthy eating and physical activity interventions: a meta-regression.

PubMed

Michie, Susan; Abraham, Charles; Whittington, Craig; McAteer, John; Gupta, Sunjai

2009-11-01

Meta-analyses of behavior change (BC) interventions typically find large heterogeneity in effectiveness and small effects. This study aimed to assess the effectiveness of active BC interventions designed to promote physical activity and healthy eating and investigate whether theoretically specified BC techniques improve outcome. Interventions, evaluated in experimental or quasi-experimental studies, using behavioral and/or cognitive techniques to increase physical activity and healthy eating in adults, were systematically reviewed. Intervention content was reliably classified into 26 BC techniques and the effects of individual techniques, and of a theoretically derived combination of self-regulation techniques, were assessed using meta-regression. Valid outcomes of physical activity and healthy eating. The 122 evaluations (N = 44,747) produced an overall pooled effect size of 0.31 (95% confidence interval = 0.26 to 0.36, I(2) = 69%). The technique, "self-monitoring," explained the greatest amount of among-study heterogeneity (13%). Interventions that combined self-monitoring with at least one other technique derived from control theory were significantly more effective than the other interventions (0.42 vs. 0.26). Classifying interventions according to component techniques and theoretically derived technique combinations and conducting meta-regression enabled identification of effective components of interventions designed to increase physical activity and healthy eating. PsycINFO Database Record (c) 2009 APA, all rights reserved.

Theoretical study in carrier mobility of two-dimensional materials

NASA Astrophysics Data System (ADS)

Huang, R.

2017-09-01

Recently, the theoretical prediction on carrier mobility of two-dimensional (2D) materials has aroused wild attention. At present, there is still a large gap between the theoretical prediction and the device performance of the semiconductor based on the 2D layer semiconductor materials such as graphene. It is particularly important to theoretically design and screen the high-performance 2D layered semiconductor materials with suitable band gap and high carrier mobility. This paper introduces some 2D materials with fine properties and deduces the formula for mobility of the isotropic materials on the basis of the deformation potential theory and Fermic golden rule under acoustic phonon scattering conditions, and then discusses the carrier mobility of anisotropic materials with Dirac cones. We point out the misconceptions in the existing literature and discuss the correct ones.

Mechanical Behaviour of 3D Multi-layer Braided Composites: Experimental, Numerical and Theoretical Study

NASA Astrophysics Data System (ADS)

Deng, Jian; Zhou, Guangming; Ji, Le; Wang, Xiaopei

2017-12-01

Mechanical properties and failure mechanisms of a newly designed 3D multi-layer braided composites are evaluated by experimental, numerical and theoretical studies. The microstructure of the composites is introduced. The unit cell technique is employed to address the periodic arrangement of the structure. The volume averaging method is used in theoretical solutions while FEM with reasonable periodic boundary conditions and meshing technique in numerical simulations. Experimental studies are also conducted to verify the feasibility of the proposed models. Predicted elastic properties agree well with the experimental data, indicating the feasibility of the proposed models. Numerical evaluation is more accurate than theoretical assessment. Deformations and stress distributions of the unit cell under tension shows displacement and traction continuity, guaranteeing the rationality of the applied periodic boundary conditions. Although compression and tension modulus are close, the compressive strength only reaches 70% of the tension strength. This indicates that the composites can be weakened in compressive loading. Additionally, by analysing the micrograph of fracture faces and strain-stress curves, a brittle failure mechanism is observed both in composites under tension and compression.

Molecular design of donor-acceptor dyes for efficient dye-sensitized solar cells I: a DFT study.

PubMed

El-Shishtawy, Reda M; Asiri, Abdullah M; Aziz, Saadullah G; Elroby, Shaaban A K

2014-06-01

Dye-sensitized solar cells (DSSCs) have drawn great attention as low cost and high performance alternatives to conventional photovoltaic devices. The molecular design presented in this work is based on the use of pyran type dyes as donor based on frontier molecular orbitals (FMO) and theoretical UV-visible spectra in combination with squaraine type dyes as an acceptor. Density functional theory has been used to investigate several derivatives of pyran type dyes for a better dye design based on optimization of absorption, regeneration, and recombination processes in gas phase. The frontier molecular orbital (FMO) of the HOMO and LUMO energy levels plays an important role in the efficiency of DSSCs. These energies contribute to the generation of exciton, charge transfer, dissociation and exciton recombination. The computations of the geometries and electronic structures for the predicted dyes were performed using the B3LYP/6-31+G** level of theory. The FMO energies (EHOMO, ELUMO) of the studied dyes are calculated and analyzed in the terms of the UV-visible absorption spectra, which have been examined using time-dependent density functional theory (TD-DFT) techniques. This study examined absorption properties of pyran based on theoretical UV-visible absorption spectra, with comparisons between TD-DFT using B3LYP, PBE, and TPSSH functionals with 6-31+G (d) and 6-311++G** basis sets. The results provide a valuable guide for the design of donor-acceptor (D-A) dyes with high molar absorptivity and current conversion in DSSCs. The theoretical results indicated 4-(dicyanomethylene)-2-methyl-6-(p-dimethylaminostyryl)-4H-pyran dye (D2-Me) can be effectively used as a donor dye for DSSCs. This dye has a low energy gap by itself and a high energy gap with squaraine acceptor type dye, the design that reduces the recombination and improves the photocurrent generation in solar cell.

A study of hydrocarbons associated with brines from DOE geopressured wells. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keeley, D.F.

1993-07-01

Accomplishments are summarized on the following tasks: distribution coefficients and solubilities, DOE design well sampling, analysis of well samples, review of theoretical models of geopressured reservoir hydrocarbons, monitor for aliphatic hydrocarbons, development of a ph meter probe, DOE design well scrubber analysis, removal and disposition of gas scrubber equipment at Pleasant Bayou Well, and disposition of archived brines.

Student Achievement in High Performing, Suburban Middle Schools and Low Performing, Urban Middle Schools: Plausible Explanations for the Differences

ERIC Educational Resources Information Center

Brown, Kathleen M.; Anfara, Vincent A., Jr.; Roney, Kathleen

2004-01-01

Utilizing a qualitative, multisite case study design and the theoretical framework of Hoy and Hannum (1997), the design and execution of this research investigates plausible explanations for the difference in student achievement between high performing (HPS) suburban middle schools and low performing (LPS) urban middle schools. Aside from the…

A study of hydrocarbons associated with brines from DOE geopressured wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keeley, D.F.

1993-01-01

Accomplishments are summarized on the following tasks: distribution coefficients and solubilities, DOE design well sampling, analysis of well samples, review of theoretical models of geopressured reservoir hydrocarbons, monitor for aliphatic hydrocarbons, development of a ph meter probe, DOE design well scrubber analysis, removal and disposition of gas scrubber equipment at Pleasant Bayou Well, and disposition of archived brines.

Theoretical and experimental study of a fiber optic microphone

NASA Technical Reports Server (NTRS)

Hu, Andong; Cuomo, Frank W.; Zuckerwar, Allan J.

1992-01-01

Modifications to condenser microphone theory yield new expressions for the membrane deflections at its center, which provide the basic theory for the fiber optic microphone. The theoretical analysis for the membrane amplitude and the phase response of the fiber optic microphone is given in detail in terms of its basic geometrical quantities. A relevant extension to the original concepts of the optical microphone includes the addition of a backplate with holes similar in design to present condenser microphone technology. This approach generates improved damping characteristics and extended frequency response that were not previously considered. The construction and testing of the improved optical fiber microphone provide experimental data that are in good agreement with the theoretical analysis.

Space Shuttle Tail Service Mast Concept Verification

NASA Technical Reports Server (NTRS)

Uda, R. T.

1976-01-01

Design studies and analyses were performed to describe the loads and dynamics of the space shuttle tail service masts (TSMs). Of particular interest are the motion and interaction of the umbilical carrier plate, lanyard system, vacuum jacketed hoses, latches, links, and masthead. A development test rig was designed and fabricated to obtain experimental data. The test program is designed to (1) verify the theoretical dynamics calculations, (2) prove the soundness of design concepts, and (3) elucidate problem areas (if any) in the design of mechanisms and structural components. Design, fabrication, and initiation of TSM development testing at Kennedy Space Center are described.

Experimental and theoretical analysis for improved microscope design of optical projection tomographic microscopy.

PubMed

Coe, Ryan L; Seibel, Eric J

2013-09-01

We present theoretical and experimental results of axial displacement of objects relative to a fixed condenser focal plane (FP) in optical projection tomographic microscopy (OPTM). OPTM produces three-dimensional, reconstructed images of single cells from two-dimensional projections. The cell rotates in a microcapillary to acquire projections from different perspectives where the objective FP is scanned through the cell while the condenser FP remains fixed at the center of the microcapillary. This work uses a combination of experimental and theoretical methods to improve the OPTM instrument design.

Ecological Research Division Theoretical Ecology Program. [Contains abstracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-10-01

This report presents the goals of the Theoretical Ecology Program and abstracts of research in progress. Abstracts cover both theoretical research that began as part of the terrestrial ecology core program and new projects funded by the theoretical program begun in 1988. Projects have been clustered into four major categories: Ecosystem dynamics; landscape/scaling dynamics; population dynamics; and experiment/sample design.

Theoretical modeling, simulation and experimental study of hybrid piezoelectric and electromagnetic energy harvester

NASA Astrophysics Data System (ADS)

Li, Ping; Gao, Shiqiao; Cong, Binglong

2018-03-01

In this paper, performances of vibration energy harvester combined piezoelectric (PE) and electromagnetic (EM) mechanism are studied by theoretical analysis, simulation and experimental test. For the designed harvester, electromechanical coupling modeling is established, and expressions of vibration response, output voltage, current and power are derived. Then, performances of the harvester are simulated and tested; moreover, the power charging rechargeable battery is realized through designed energy storage circuit. By the results, it's found that compared with piezoelectric-only and electromagnetic-only energy harvester, the hybrid energy harvester can enhance the output power and harvesting efficiency; furthermore, at the harmonic excitation, output power of harvester linearly increases with acceleration amplitude increasing; while it enhances with acceleration spectral density increasing at the random excitation. In addition, the bigger coupling strength, the bigger output power is, and there is the optimal load resistance to make the harvester output the maximal power.

A theory for classification of health care organizations in the new economy.

PubMed

Vimarlund, Vivian; Sjöberg, Cecilia; Timpka, Toomas

2003-10-01

Most of the available studies into information technology (IT) have been limited to investigating specific issues, such as how IT can support decision makers distributing the information throughout health care organization, or how technology impacts organizational performance. In this study, for use in the planning of information system development projects, a theoretical model for the classification of health care organizations is proposed. We try to reflect the development in the contemporary digital economy by theoretically classifying health care organizations into three types, namely traditional, developing, and flexible. We describe traditional health care organizations as organizations with a centralized system for management and control. In developing health care organizations, IT is spread over the horizontal dimension and is used for coordinating the different parties throughout the organization. Finally, flexible health care organizations are those which work actively with the design of new health care organizational structure while they are designing the information system.

Solar and stellar coronal plasmas

NASA Technical Reports Server (NTRS)

Golub, Leon

1989-01-01

Progress in observational, theoretical, and radio studies of coronal plasmas is summarized. Specifically work completed in the area of solar and stellar magnetic fields, related photospheric phenomena and the relationships between magnetism, rotation, coronal and chromospheric emission in solar-like stars is described. Also outlined are theoretical studies carried out in the following areas, among others: (1) neutral beams as the dominant energy transport mechanism in two ribbon-flares; (2) magneto hydrodynamic and circuit models for filament eruptions; and (3) studies of radio emission mechanisms in transient events. Finally, radio observations designed for coronal activity studies of the sun and of solar-type coronae are described. A bibliography of publications and talks is provided along with reprints of selected articles.

MHD Energy Bypass Scramjet Performance with Real Gas Effects

NASA Technical Reports Server (NTRS)

Park, Chul; Mehta, Unmeel B.; Bogdanoff, David W.

2000-01-01

The theoretical performance of a scramjet propulsion system incorporating an magneto-hydro-dynamic (MHD) energy bypass scheme is calculated. The one-dimensional analysis developed earlier, in which the theoretical performance is calculated neglecting skin friction and using a sudden-freezing approximation for the nozzle flow, is modified to incorporate the method of Van Driest for turbulent skin friction and a finite-rate chemistry calculation in the nozzle. Unlike in the earlier design, in which four ramp compressions occurred in the pitch plane, in the present design the first two ramp compressions occur in the pitch plane and the next two compressions occur in the yaw plane. The results for the simplified design of a spaceliner show that (1) the present design produces higher specific impulses than the earlier design, (2) skin friction substantially reduces thrust and specific impulse, and (3) the specific impulse of the MHD-bypass system is still better than the non-MHD system and typical rocket over a narrow region of flight speeds and design parameters. Results suggest that the energy management with MHD principles offers the possibility of improving the performance of the scramjet. The technical issues needing further studies are identified.

A Theoretical Framework for Serious Game Design: Exploring Pedagogy, Play and Fidelity and Their Implications for the Design Process

ERIC Educational Resources Information Center

Rooney, Pauline

2012-01-01

It is widely acknowledged that digital games can provide an engaging, motivating and "fun" experience for students. However an entertaining game does not necessarily constitute a meaningful, valuable learning experience. For this reason, experts espouse the importance of underpinning serious games with a sound theoretical framework which…

Simulation studies of the application of SEASAT data in weather and state of sea forecasting models

NASA Technical Reports Server (NTRS)

Cardone, V. J.; Greenwood, J. A.

1979-01-01

The design and analysis of SEASAT simulation studies in which the error structure of conventional analyses and forecasts is modeled realistically are presented. The development and computer implementation of a global spectral ocean wave model is described. The design of algorithms for the assimilation of theoretical wind data into computers and for the utilization of real wind data and wave height data in a coupled computer system are presented.

Challenges to the Doctoral Journey: A Case of Female Doctoral Students from Ethiopia

ERIC Educational Resources Information Center

Bireda, Asamenew Demessie

2015-01-01

This study aimed to investigate some challenges female doctoral students experience in their doctoral journey. The study used a qualitative design and structured interviews. The theoretical framework that guided the study was that of Urie Bronfenbrenner's ecosystemic theory. A purposely selected sample of five female doctoral students from the…

Study Abroad: The Reality of Building Dynamic Group Learning.

ERIC Educational Resources Information Center

Ransbury, Molly K.; Harris, Sandra A.

1994-01-01

The collaborative effort of a professor of human development with expertise in group process and a general education professor with expertise in Greek mythology and culture uses a case study format to apply theoretical models of group dynamics to the travel and learning experience of study abroad. Implications for course design and group process…

Developing Student Leaders in Campus Outdoor Recreation Programs: An Appreciative Inquiry

ERIC Educational Resources Information Center

Sandberg, Dan; Martin, Bruce; Szolosi, Andrew; Early, Sherry; Casapulla, Sharon

2017-01-01

Campus outdoor recreation programs can play an integral role in developing student leaders. In this study, we sought a better understanding of the shared positive elements exemplary outdoor programs are using to develop their student leaders. The study was designed using a collective case study methodology and the theoretical lens of the…

Social Capital: Relationship between Social Capital and Teacher Job Satisfaction within a Learning Organization

ERIC Educational Resources Information Center

Chazon, Timothy Lee

2009-01-01

This dissertation was designed to study the relationship between Social Capital and teacher Job Satisfaction for 11 selected North Carolina Middle Schools. This study uses the learning organizational theory and social capital theory as theoretical constructs for studying the complex relationships between school as a Learning Organization (LO),…

Comprehension and Recall of Television's Computerized Image: An Exploratory Study.

ERIC Educational Resources Information Center

Metallinos, Nikos; Chartrand, Sylvie

This exploratory study of the effects of the new visual communications media imagery (e.g., video games, digital television, and computer graphics) on the visual perception process is designed to provide a theoretical framework for research, introduce appropriate research instruments for such study, and experiment with the application of biometric…

Reverse design and characteristic study of multi-range HMCVT

NASA Astrophysics Data System (ADS)

Zhu, Zhen; Chen, Long; Zeng, Falin

2017-09-01

The reduction of fuel consumption and increase of transmission efficiency is one of the key problems of the agricultural machinery. Many promising technologies such as hydromechanical continuously variable transmissions (HMCVT) are the focus of research and investments, but there is little technical documentation that describes the design principle and presents the design parameters. This paper presents the design idea and characteristic study of HMCVT, in order to find out the suitable scheme for the big horsepower tractors. Analyzed the kinematics and dynamics of a large horsepower tractor, according to the characteristic parameters, a hydro-mechanical continuously variable transmission has been designed. Compared with the experimental curves and theoretical curves of the stepless speed regulation of transmission, the experimental result illustrates the rationality of the design scheme.

Experimental and Theoretical Analysis of Sound Absorption Properties of Finely Perforated Wooden Panels

PubMed Central

Song, Boqi; Peng, Limin; Fu, Feng; Liu, Meihong; Zhang, Houjiang

2016-01-01

Perforated wooden panels are typically utilized as a resonant sound absorbing material in indoor noise control. In this paper, the absorption properties of wooden panels perforated with tiny holes of 1–3 mm diameter were studied both experimentally and theoretically. The Maa-MPP (micro perforated panels) model and the Maa-Flex model were applied to predict the absorption regularities of finely perforated wooden panels. A relative impedance comparison and full-factorial experiments were carried out to verify the feasibility of the theoretical models. The results showed that the Maa-Flex model obtained good agreement with measured results. Control experiments and measurements of dynamic mechanical properties were carried out to investigate the influence of the wood characteristics. In this study, absorption properties were enhanced by sound-induced vibration. The relationship between the dynamic mechanical properties and the panel mass-spring vibration absorption was revealed. While the absorption effects of wood porous structure were not found, they were demonstrated theoretically by using acoustic wave propagation in a simplified circular pipe with a suddenly changed cross-section model. This work provides experimental and theoretical guidance for perforation parameter design. PMID:28774063

Using a commercial CAD system for simultaneous input to theoretical aerodynamic programs and wind-tunnel model construction

NASA Technical Reports Server (NTRS)

Enomoto, F.; Keller, P.

1984-01-01

The Computer Aided Design (CAD) system's common geometry database was used to generate input for theoretical programs and numerically controlled (NC) tool paths for wind tunnel part fabrication. This eliminates the duplication of work in generating separate geometry databases for each type of analysis. Another advantage is that it reduces the uncertainty due to geometric differences when comparing theoretical aerodynamic data with wind tunnel data. The system was adapted to aerodynamic research by developing programs written in Design Analysis Language (DAL). These programs reduced the amount of time required to construct complex geometries and to generate input for theoretical programs. Certain shortcomings of the Design, Drafting, and Manufacturing (DDM) software limited the effectiveness of these programs and some of the Calma NC software. The complexity of aircraft configurations suggests that more types of surface and curve geometry should be added to the system. Some of these shortcomings may be eliminated as improved versions of DDM are made available.

A unifying theoretical and algorithmic framework for least squares methods of estimation in diffusion tensor imaging.

PubMed

Koay, Cheng Guan; Chang, Lin-Ching; Carew, John D; Pierpaoli, Carlo; Basser, Peter J

2006-09-01

A unifying theoretical and algorithmic framework for diffusion tensor estimation is presented. Theoretical connections among the least squares (LS) methods, (linear least squares (LLS), weighted linear least squares (WLLS), nonlinear least squares (NLS) and their constrained counterparts), are established through their respective objective functions, and higher order derivatives of these objective functions, i.e., Hessian matrices. These theoretical connections provide new insights in designing efficient algorithms for NLS and constrained NLS (CNLS) estimation. Here, we propose novel algorithms of full Newton-type for the NLS and CNLS estimations, which are evaluated with Monte Carlo simulations and compared with the commonly used Levenberg-Marquardt method. The proposed methods have a lower percent of relative error in estimating the trace and lower reduced chi2 value than those of the Levenberg-Marquardt method. These results also demonstrate that the accuracy of an estimate, particularly in a nonlinear estimation problem, is greatly affected by the Hessian matrix. In other words, the accuracy of a nonlinear estimation is algorithm-dependent. Further, this study shows that the noise variance in diffusion weighted signals is orientation dependent when signal-to-noise ratio (SNR) is low (

Do behavioral scientists really understand HIV-related sexual risk behavior? A systematic review of longitudinal and experimental studies predicting sexual behavior.

PubMed

Huebner, David M; Perry, Nicholas S

2015-10-01

Behavioral interventions to reduce sexual risk behavior depend on strong health behavior theory. By identifying the psychosocial variables that lead causally to sexual risk, theories provide interventionists with a guide for how to change behavior. However, empirical research is critical to determining whether a particular theory adequately explains sexual risk behavior. A large body of cross-sectional evidence, which has been reviewed elsewhere, supports the notion that certain theory-based constructs (e.g., self-efficacy) are correlates of sexual behavior. However, given the limitations of inferring causality from correlational research, it is essential that we review the evidence from more methodologically rigorous studies (i.e., longitudinal and experimental designs). This systematic review identified 44 longitudinal studies in which investigators attempted to predict sexual risk from psychosocial variables over time. We also found 134 experimental studies (i.e., randomized controlled trials of HIV interventions), but of these only 9 (6.7 %) report the results of mediation analyses that might provide evidence for the validity of health behavior theories in predicting sexual behavior. Results show little convergent support across both types of studies for most traditional, theoretical predictors of sexual behavior. This suggests that the field must expand the body of empirical work that utilizes the most rigorous study designs to test our theoretical assumptions. The inconsistent results of existing research would indicate that current theoretical models of sexual risk behavior are inadequate, and may require expansion or adaptation.

A guide to using the Theoretical Domains Framework of behaviour change to investigate implementation problems.

PubMed

Atkins, Lou; Francis, Jill; Islam, Rafat; O'Connor, Denise; Patey, Andrea; Ivers, Noah; Foy, Robbie; Duncan, Eilidh M; Colquhoun, Heather; Grimshaw, Jeremy M; Lawton, Rebecca; Michie, Susan

2017-06-21

Implementing new practices requires changes in the behaviour of relevant actors, and this is facilitated by understanding of the determinants of current and desired behaviours. The Theoretical Domains Framework (TDF) was developed by a collaboration of behavioural scientists and implementation researchers who identified theories relevant to implementation and grouped constructs from these theories into domains. The collaboration aimed to provide a comprehensive, theory-informed approach to identify determinants of behaviour. The first version was published in 2005, and a subsequent version following a validation exercise was published in 2012. This guide offers practical guidance for those who wish to apply the TDF to assess implementation problems and support intervention design. It presents a brief rationale for using a theoretical approach to investigate and address implementation problems, summarises the TDF and its development, and describes how to apply the TDF to achieve implementation objectives. Examples from the implementation research literature are presented to illustrate relevant methods and practical considerations. Researchers from Canada, the UK and Australia attended a 3-day meeting in December 2012 to build an international collaboration among researchers and decision-makers interested in the advancing use of the TDF. The participants were experienced in using the TDF to assess implementation problems, design interventions, and/or understand change processes. This guide is an output of the meeting and also draws on the authors' collective experience. Examples from the implementation research literature judged by authors to be representative of specific applications of the TDF are included in this guide. We explain and illustrate methods, with a focus on qualitative approaches, for selecting and specifying target behaviours key to implementation, selecting the study design, deciding the sampling strategy, developing study materials, collecting and analysing data, and reporting findings of TDF-based studies. Areas for development include methods for triangulating data, e.g. from interviews, questionnaires and observation and methods for designing interventions based on TDF-based problem analysis. We offer this guide to the implementation community to assist in the application of the TDF to achieve implementation objectives. Benefits of using the TDF include the provision of a theoretical basis for implementation studies, good coverage of potential reasons for slow diffusion of evidence into practice and a method for progressing from theory-based investigation to intervention.

Advancing engagement methods for trials: the CORE study relational model of engagement for a stepped wedge cluster randomised controlled trial of experience-based co-design for people living with severe mental illnesses.

PubMed

Richard, Lauralie; Piper, Donella; Weavell, Wayne; Callander, Rosemary; Iedema, Rick; Furler, John; Pierce, David; Godbee, Kali; Gunn, Jane; Palmer, Victoria J

2017-04-08

Engagement is essential in trials research but is rarely embedded across all stages of the research continuum. The development, use, effectiveness and value of engagement in trials research is poorly researched and understood, and models of engagement are rarely informed by theory. This article describes an innovative methodological approach for the development and application of a relational model of engagement in a stepped wedge designed cluster randomised controlled trial (RCT), the CORE study. The purpose of the model is to embed engagement across the continuum of the trial which will test if an experience-based co-design intervention improves psychosocial recovery for people affected by severe mental illness. The model was developed in three stages and used a structured iterative approach. A context mapping assessment of trial sites was followed by a literature review on recruitment and retention of hard-to-reach groups in complex interventions and RCTs. Relevant theoretical and philosophical underpinnings were identified by an additional review of literature to inform model development and enactment of engagement activities. Policy, organisational and service user data combined with evidence from the literature on barriers to recruitment provided contextual information. Four perspectives support the theoretical framework of the relational model of engagement and this is organised around two facets: the relational and continuous. The relational facet is underpinned by relational ethical theories and participatory action research principles. The continuous facet is supported by systems thinking and translation theories. These combine to enact an ethics of engagement and evoke knowledge mobilisation to reach the higher order goals of the model. Engagement models are invaluable for trials research, but there are opportunities to advance their theoretical development and application, particularly within stepped wedge designed studies where there may be a significant waiting period between enrolment in a study and receipt of an intervention.

Dust-concentration measurement based on Mie scattering of a laser beam

PubMed Central

Yu, Xiaoyu; Shi, Yunbo; Wang, Tian; Sun, Xu

2017-01-01

To realize automatic measurement of the concentration of dust particles in the air, a theory for dust concentration measurement was developed, and a system was designed to implement the dust concentration measurement method based on laser scattering. In the study, the principle of dust concentration detection using laser scattering is studied, and the detection basis of Mie scattering theory is determined. Through simulation, the influence of the incident laser wavelength, dust particle diameter, and refractive index of dust particles on the scattered light intensity distribution are obtained for determining the scattered light intensity curves of single suspended dust particles under different characteristic parameters. A genetic algorithm was used to study the inverse particle size distribution, and the reliability of the measurement system design is proven theoretically. The dust concentration detection system, which includes a laser system, computer circuitry, air flow system, and control system, was then implemented according to the parameters obtained from the theoretical analysis. The performance of the designed system was evaluated. Experimental results show that the system performance was stable and reliable, resulting in high-precision automatic dust concentration measurement with strong anti-interference ability. PMID:28767662

Hypermedia and Vocabulary Acquisition for Second Language

ERIC Educational Resources Information Center

Meli, Rocio

2009-01-01

The purpose of this study was to examine the impact of multimedia as a delivery tool for enhancing vocabulary in second-language classrooms. The mixed method design focused on specific techniques to help students acquire Spanish vocabulary and communication skills. The theoretical framework for this study consisted of second language theories…

Teaching Strategies for Value Education in Social Studies: A Theoretical Position.

ERIC Educational Resources Information Center

Fraenkel, Jack R.

The systematic design of appropriate teaching strategies to bring about desired values is crucially important, and badly needed, in social studies education. Teachers cannot leave the accomplishment of affective objectives to chance or to learning activities planned mainly for cognitive goals. Examples of an affective strategy that develops…

Developing Instructional Leaders through Assistant Principals' Academy: A Partnership for Success

ERIC Educational Resources Information Center

Gurley, D. Keith; Anast-May, Linda; Lee, H. T.

2015-01-01

This article describes findings from a single-case qualitative study of a unique 2-year professional development academy for practicing assistant principals designed and implemented in partnership between school district personnel and university educational leadership faculty members. The study was conducted based on the theoretical framework of…

The Study of Aggressive Pornography: The Vicissitudes of Relevance.

ERIC Educational Resources Information Center

Brannigan, Augustine; Goldenberg, Sheldon

1987-01-01

Reviews experimental studies of behavioral consequences of exposure to violent or aggressive pornography and evaluates the validity and relevance as support for censoring pornography in the aftermath of the Meese Commission. Finds research deficient in several areas, such as design, theoretical models, and interpretation, thus offering no…

Predictors of Stress-Related Growth in Parents of Children with ADHD

ERIC Educational Resources Information Center

Finzi-Dottan, Ricky; Triwitz, Yael Segal; Golubchik, Pavel

2011-01-01

This study was designed to investigate stress-related growth in 71 parents of children with ADHD, compared with 80 parents of non-clinical children. Adopting Tedeschi and Calhoun's (2004) theoretical framework for predicting personal growth, the study investigated the contribution of emotional intelligence (individual characteristics), social…

Multinational Corporations, Democracy and Child Mortality: A Quantitative, Cross-National Analysis of Developing Countries

ERIC Educational Resources Information Center

Shandra, John M.; Nobles, Jenna E.; London, Bruce; Williamson, John B.

2005-01-01

This study presents quantitative, sociological models designed to account for cross-national variation in child mortality. We consider variables linked to five different theoretical perspectives that include the economic modernization, social modernization, political modernization, ecological-evolutionary, and dependency perspectives. The study is…

Case Study of Instructional Innovation among Elementary Teachers

ERIC Educational Resources Information Center

McCracklin, Patricia

2012-01-01

In one mid-western elementary school, teachers received training designed to change their teaching methods in their classrooms. Research has shown teachers have difficulty changing teaching behaviors. The research questions addressed teachers' beliefs and understandings of teaching in a new way. The theoretical framework for this study is…

Relapse and Recurrence Prevention in the Treatment for Adolescents with Depression Study

ERIC Educational Resources Information Center

Simons, Anne D.; Rohde, Paul; Kennard, Betsy D.; Robins, Michele

2005-01-01

Relapse and recurrence in adolescent depression are important problems. Much less is known about relapse prevention compared to the acute treatment of depression in adolescents. Based on previous research, theoretical predictions, and clinical experience, the Treatment for Adolescents With Depression Study (TADS) protocol was designed to determine…

Adult Financial Literacy Education and Latina Learners: A Qualitative Case Study

ERIC Educational Resources Information Center

Sprow, Karin Millard

2010-01-01

This qualitative study used a case study design to explore the teaching and learning that takes place in an adult Latino financial literacy education that was aimed specifically at Latina single mothers. The theoretical framework of the study was informed by a blend of critical and Latina feminist sociocultural adult learning perspectives, as well…

A Longitudinal Study of Pubertal Timing and Extreme Body Change Behaviors among Adolescent Boys and Girls

ERIC Educational Resources Information Center

McCabe, Marita P.; Ricciardelli, Lina A.

2004-01-01

Recent studies have examined the prevalence of disordered eating and other health risk behaviors among adolescent boys and girls. However, these studies generally have not examined predictors of these behaviors, and have not embedded the investigations within a theoretical framework. This study employed a longitudinal design to evaluate the…

Contributions to the study of inductive transducers for measuring the amplitude of vibrations in solid media

NASA Technical Reports Server (NTRS)

Dragan, O.; Galan, N.; Sirbu, A.; Ghita, C.

1974-01-01

The design and construction of inductive transducers for measuring the vibrations in metal bars at ultrasonic frequencies are discussed. Illustrations of the inductive transducers are provided. The quantitative relations that are useful in designing the transducers are analyzed. Mathematical models are developed to substantiate the theoretical considerations. Results obtained with laboratory equipment in testing specified metal samples are included.

Mentors Offering Maternal Support (M.O.M.S.)

DTIC Science & Technology

2011-08-02

at Sessions 1, 5, and 8. Table 1. Pretest - posttest , randomized, controlled, repeated measured design Experimental Intervention Sessions...theoretical mediators of self-esteem and emotional support (0.6 standard deviation change from pretest to posttest ) with reduction of effect to 0.4...always brought back to the designated topic . In order to have statistically significant results for the outcome variables the study sessions must

The Impact of Lack of Resources on Declining Students' Enrolments in Design and Technology in Botswana Junior Secondary Schools

ERIC Educational Resources Information Center

Gaotlhobogwe, Michael

2012-01-01

Lack of resources has resulted in declining students' enrolment in design and technology in Botswana junior secondary schools by up to 6% per year over 10 years, despite positive encouragement by the government. Based on the PATT (pupils' attitude towards technology) theoretical framework this study indicated how a lack of resources in Botswana…

Study of Designing BPF by Using LC Tap-Coupling Resonators

NASA Astrophysics Data System (ADS)

Yasuzumi, Takenori; Wada, Kouji; Nakajima, Naoko; Hashimoto, Osamu

The resonance characteristics of short-ended half-wavelength coplanar waveguide(CPW) LC tap-coupling resonators are examined theoretically and experimentally. The characteristics near the passband have been improved by applying the presented CPW resonator to a design of a bandpass filter(BPF). Moreover, the difference between the calculation and the measurement results is examined by using the equivalent circuit about the presented BPF.

Alcohol Warning Label Awareness and Attention: A Multi-method Study.

PubMed

Pham, Cuong; Rundle-Thiele, Sharyn; Parkinson, Joy; Li, Shanshi

2018-01-01

Evaluation of alcohol warning labels requires careful consideration ensuring that research captures more than awareness given that labels may not be prominent enough to attract attention. This study investigates attention of current in market alcohol warning labels and examines whether attention can be enhanced through theoretically informed design. Attention scores obtained through self-report methods are compared to objective measures (eye-tracking). A multi-method experimental design was used delivering four conditions, namely control, colour, size and colour and size. The first study (n = 559) involved a self-report survey to measure attention. The second study (n = 87) utilized eye-tracking to measure fixation count and duration and time to first fixation. Analysis of Variance (ANOVA) was utilized. Eye-tracking identified that 60% of participants looked at the current in market alcohol warning label while 81% looked at the optimized design (larger and red). In line with observed attention self-reported attention increased for the optimized design. The current study casts doubt on dominant practices (largely self-report), which have been used to evaluate alcohol warning labels. Awareness cannot be used to assess warning label effectiveness in isolation in cases where attention does not occur 100% of the time. Mixed methods permit objective data collection methodologies to be triangulated with surveys to assess warning label effectiveness. Attention should be incorporated as a measure in warning label effectiveness evaluations. Colour and size changes to the existing Australian warning labels aided by theoretically informed design increased attention. © The Author 2017. Medical Council on Alcohol and Oxford University Press. All rights reserved.

Upscaling the number of learners, fragmenting the role of teachers: How do massive open online courses (MOOCs) form new conditions for learning design?

NASA Astrophysics Data System (ADS)

Buhl, Mie; Andreasen, Lars Birch; Pushpanadham, Karanam

2018-03-01

The proliferation and expansion of massive open online courses (MOOCs) prompts a need to revisit classical pedagogical questions. In what ways will MOOCs facilitate and promote new e-learning pedagogies? Is current learning design adequate for the "massiveness" and "openness" of MOOCs? This article discusses the ways in which MOOCs create new conditions for designing learning processes. The authors present various theoretical approaches to learning design and discuss a combination of theoretical perspectives. They discern a fragmentation of the teacher role; where the teacher was once the main person responsible for planning, practice and reflection, those activities may now be performed by different actors with different areas of responsibility. The theoretical discussion is complemented by a review of recent studies of new practices and design formats aiming to overcome the upscaling issues of MOOCs. The authors present a multifaceted picture of MOOC methodologies, including a typology of hybrid approaches to MOOC design. Through the example of MOOC implementation in India, they address the integration of MOOCs into formal higher education systems. They conclude their article with the contention that, through upscaling, important facets of students' intellectual development and critical thinking might be left to the students themselves. This may cause problems. Adequate scaffolding from a teacher, such as adapting activities to the specific situation, might be needed to develop the skills required to be a self-directed learner. Furthermore, upscaling seems to promote a separation of the formerly unified teacher functions of planning, teaching and assessing, which necessitates increased collaboration among the many new actors in the field of pedagogy.

Applying health education theory to patient safety programs: three case studies.

PubMed

Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

2008-04-01

Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

Designing a Double-Pole Nanoscale Relay Based on a Carbon Nanotube: A Theoretical Study

NASA Astrophysics Data System (ADS)

Mu, Weihua; Ou-Yang, Zhong-can; Dresselhaus, Mildred S.

2017-08-01

We theoretically investigate a novel and powerful double-pole nanoscale relay based on a carbon nanotube, which is one of the nanoelectromechanical switches being able to work under the strong nuclear radiation, and analyze the physical mechanism of the operating stages in the operation, including "pull in," "connection," and "pull back," as well as the key factors influencing the efficiency of the devices. We explicitly provide the analytical expression of the two important operation voltages, Vpull in and Vpull back , therefore clearly showing the dependence of the material properties and geometry of the present devices by the analytical method from basic physics, avoiding complex numerical calculations. Our method is easy to use in preparing the design guide for fabricating the present device and other nanoelectromechanical devices.

Using Software Simulators to Enhance the Learning of Digital Logic Design for the Information Technology Students

ERIC Educational Resources Information Center

Alsadoon, Abeer; Prasad, P. W. C.; Beg, Azam

2017-01-01

Making the students understand the theoretical concepts of digital logic design concepts is one of the major issues faced by the academics, therefore the teachers have tried different techniques to link the theoretical information to the practical knowledge. Use of software simulations is a technique for learning and practice that can be applied…

Theoretical studies on stability and feasibility of 0.34 THz EIK

NASA Astrophysics Data System (ADS)

Li, Shuang; Wang, Jianguo; Wang, Guangqiang; Wang, Dongyang

2017-05-01

The stability of the circuit and the tolerance during the manufacture process are theoretically studied in the design of 0.34 THz extended interaction klystron, which are helpful to increase the feasibility of the device. By using the small signal theory, the beam-loading conductance is studied to increase the efficiency of the beam-wave interaction. Combined with the study of start current for oscillation modes, the analysis of stability in multi-gap cavity is proposed, leading to the optimization of cavity. As a crucial factor affecting the ultimate performance of device, the inaccuracy during the fabrication process is researched. The acceptable tolerance is summarized through discussion of various geometrical dimensions' influences on cavity's characteristics. The study of power loss in the conductive wall is presented and the copper is believed to be adapted in making the device practicable with low attenuation. The physical design is simulated and verified by the particle-in-cell (PIC) method, and the results show that the output power of 142 W can be reached steadily at the frequency of 347.7 GHz, approaching the gain of 37.9 dB.

Space qualified Nd:YAG laser (phase 1 - design)

NASA Technical Reports Server (NTRS)

Foster, J. D.; Kirk, R. F.

1971-01-01

Results of a design study and preliminary design of a space qualified Nd:YAG laser are presented. A theoretical model of the laser was developed to allow the evaluation of the effects of various parameters on its performance. Various pump lamps were evaluated and sum pumping was considered. Cooling requirements were examined and cooling methods such as radiation, cryogenic and conductive were analysed. Power outputs and efficiences of various configurations and the pump and laser lifetime are discussed. Also considered were modulation and modulating methods.

The study of theoretical and experimental feasibilities of the rocket fuel components ignition by laser radiation

NASA Astrophysics Data System (ADS)

Belyaev, Vadim S.; Guterman, Vitaly Y.; Ivanov, Anatoly V.

2004-06-01

The report presents the theoretical and experimental results obtained during the first year of the ISTC project No. 1926. The energy and temporal characteristics of the laser radiation necessary to ignite the working components mixture in a rocket engine combustion chamber have been predicted. Two approaches have been studied: the optical gas fuel laser-induced breakdown; the laser-initiated plasma torch on target surface. The possibilities and conditions of the rocket fuel components ignition by a laser beam in the differently designed combustion chambers have been estimated and studied. The comparative analysis shows that both the optical spark and light focusing on target techniques can ignite the mixture.

Principles and performance of tapered fiber lasers: from uniform to flared geometry.

PubMed

Kerttula, Juho; Filippov, Valery; Chamorovskii, Yuri; Ustimchik, Vasily; Golant, Konstantin; Okhotnikov, Oleg G

2012-10-10

We have studied the recently demonstrated concept of fiber lasers based on active tapered double-clad fiber (T-DCF) in copropagating and counterpropagating configurations, both theoretically and experimentally, and compared the performance to fiber lasers based on conventional cylindrical fibers in end-pumped configurations. Specific properties of T-DCFs were considered theoretically using a rate-equation model developed for tapered fibers, and a detailed comparative study was carried out experimentally. Furthermore, we have studied mode coupling effects in long adiabatic tapers due to coiling and local bending. The results allow us to conclude that, with proper fiber design, the T-DCF technology offers a high-potential alternative for bright, cost-effective fiber devices.

Design and application of quadrature compensation patterns in bulk silicon micro-gyroscopes.

PubMed

Ni, Yunfang; Li, Hongsheng; Huang, Libin

2014-10-29

This paper focuses on the detailed design issues of a peculiar quadrature reduction method named system stiffness matrix diagonalization, whose key technology is the design and application of quadrature compensation patterns. For bulk silicon micro-gyroscopes, a complete design and application case was presented. The compensation principle was described first. In the mechanical design, four types of basic structure units were presented to obtain the basic compensation function. A novel layout design was proposed to eliminate the additional disturbing static forces and torques. Parameter optimization was carried out to maximize the available compensation capability in a limited layout area. Two types of voltage loading methods were presented. Their influences on the sense mode dynamics were analyzed. The proposed design was applied on a dual-mass silicon micro-gyroscope developed in our laboratory. The theoretical compensation capability of a quadrature equivalent angular rate no more than 412 °/s was designed. In experiments, an actual quadrature equivalent angular rate of 357 °/s was compensated successfully. The actual compensation voltages were a little larger than the theoretical ones. The correctness of the design and the theoretical analyses was verified. They can be commonly used in planar linear vibratory silicon micro-gyroscopes for quadrature compensation purpose.

Evidence-based selection of theories for designing behaviour change interventions: using methods based on theoretical construct domains to understand clinicians' blood transfusion behaviour.

PubMed

Francis, Jill J; Stockton, Charlotte; Eccles, Martin P; Johnston, Marie; Cuthbertson, Brian H; Grimshaw, Jeremy M; Hyde, Chris; Tinmouth, Alan; Stanworth, Simon J

2009-11-01

Many theories of behaviour are potentially relevant to predictive and intervention studies but most studies investigate a narrow range of theories. Michie et al. (2005) agreed 12 'theoretical domains' from 33 theories that explain behaviour change. They developed a 'Theoretical Domains Interview' (TDI) for identifying relevant domains for specific clinical behaviours, but the framework has not been used for selecting theories for predictive studies. It was used here to investigate clinicians' transfusion behaviour in intensive care units (ICU). Evidence suggests that red blood cells transfusion could be reduced for some patients without reducing quality of care. (1) To identify the domains relevant to transfusion practice in ICUs and neonatal intensive care units (NICUs), using the TDI. (2) To use the identified domains to select appropriate theories for a study predicting transfusion behaviour. An adapted TDI about managing a patient with borderline haemoglobin by watching and waiting instead of transfusing red blood cells was used to conduct semi-structured, one-to-one interviews with 18 intensive care consultants and neonatologists across the UK. Relevant theoretical domains were: knowledge, beliefs about capabilities, beliefs about consequences, social influences, behavioural regulation. Further analysis at the construct level resulted in selection of seven theoretical approaches relevant to this context: Knowledge-Attitude-Behaviour Model, Theory of Planned Behaviour, Social Cognitive Theory, Operant Learning Theory, Control Theory, Normative Model of Work Team Effectiveness and Action Planning Approaches. This study illustrated, the use of the TDI to identify relevant domains in a complex area of inpatient care. This approach is potentially valuable for selecting theories relevant to predictive studies and resulted in greater breadth of potential explanations than would be achieved if a single theoretical model had been adopted.

Theoretical Design of a Two-Photon Fluorescent Probe for Nitric Oxide with Enhanced Emission Induced by Photoninduced Electron Transfer.

PubMed

Zhang, Yujin; Leng, Jiancai; Hu, Wei

2018-04-25

In the present work, we systematically investigate the sensing abilities of two recently literature-reported two-photon fluorescent NO probes, i.e., the o-phenylenediamine derivative of Nile Red and the p-phenylenediamine derivative of coumarin. The recognition mechanisms of these probes are studied by using the molecular orbital classifying method, which demonstrates the photoinduced electron transfer process. In addition, we have designed two new probes by swapping receptor units present on fluorophores, i.e., the p-phenylenediamine derivative of Nile Red and the o-phenylenediamine derivative of coumarin. However, it illustrates that only the latter has ability to function as off-on typed fluorescent probe for NO. More importantly, calculations on the two-photon absorption properties of the probes demonstrate that both receptor derivatives of coumarin possess larger TPA cross-sections than Nile Red derivatives, which makes a better two photon fluorescent probe. Our theoretical investigations reveal that the underlying mechanism satisfactorily explain the experimental results, providing a theoretical basis on the structure-property relationships which is beneficial to developing new two-photon fluorescent probes for NO.

Design and characterization of a magnetoelastic sensor for the detection of biological agents

NASA Astrophysics Data System (ADS)

Shen, Wen; Mathison, Leslie C.; Petrenko, Valery A.; Chin, Bryan A.

2010-01-01

This paper presents the design and development of a free-standing, magnetoelastic biosensor. The detection principle is presented and various resonance characteristics of the sensor are discussed. Experimental measurements of the sensor resonance frequencies agree with theoretical predictions. The influence of the external magnetic field on the resonance behaviour of the sensor was studied and the optimum dc magnetic fields for best sensitivity in air and in water solutions for 2000 × 400 × 15 µm (2 mm) sensors and 1000 × 200 × 15 µm (1 mm) size sensors were determined to be 75 Oe and 38 Oe, respectively. Both theoretical prediction and experimental results show that smaller sensors have greater mass sensitivity and can theoretically detect mass as small as one biological spore. The sensor platform was immobilized with JRB7 phages for specific, in vitro detection of B. anthracis spores. Real-time detection of spores suspended in water was demonstrated using a flowing system. The 1 mm and 2 mm sensors were found to have a detection limit of 104 spores ml-1 and 105 spores ml-1, respectively.

A Theoretical Model for Predicting Fracture Strength and Critical Flaw Size of the ZrB2-ZrC Composites at High Temperatures

NASA Astrophysics Data System (ADS)

Wang, Ruzhuan; Li, Xiaobo; Wang, Jing; Jia, Bi; Li, Weiguo

2018-06-01

This work shows a new rational theoretical model for quantitatively predicting fracture strength and critical flaw size of the ZrB2-ZrC composites at different temperatures, which is based on a new proposed temperature dependent fracture surface energy model and the Griffith criterion. The fracture model takes into account the combined effects of temperature and damage terms (surface flaws and internal flaws) with no any fitting parameters. The predictions of fracture strength and critical flaw size of the ZrB2-ZrC composites at high temperatures agree well with experimental data. Then using the theoretical method, the improvement and design of materials are proposed. The proposed model can be used to predict the fracture strength, find the critical flaw and study the effects of microstructures on the fracture mechanism of the ZrB2-ZrC composites at high temperatures, which thus could become a potential convenient, practical and economical technical means for predicting fracture properties and material design.

Effect of donor-acceptor chromophores on photophysical properties of newly synthesized pyrazolo-pyrrolo-pyrimidines (PPP).

PubMed

Rote, Ramhari V; Shelar, Deepak P; Patil, Sandeep R; Shinde, Santosh S; Toche, Raghunath B; Jachak, Madhukar N

2011-01-01

Novel pyrazolo-pyrrolo-pyrimidine (PPP) derivatives having remarkable photophysical properties are designed with the help of theoretical semiempirical calculations. These compounds then synthesized successfully and studied effect of substituents on its photophysical properties.

Computer program determines chemical equilibria in complex systems

NASA Technical Reports Server (NTRS)

Gordon, S.; Zeleznik, F. J.

1966-01-01

Computer program numerically solves nonlinear algebraic equations for chemical equilibrium based on iteration equations independent of choice of components. This program calculates theoretical performance for frozen and equilibrium composition during expansion and Chapman-Jouguet flame properties, studies combustion, and designs hardware.

The minimal cost of life in space.

PubMed

Drysdale, A E; Rutkze, C J; Albright, L D; LaDue, R L

2004-01-01

The cost of keeping people alive in space is assessed from a theoretical viewpoint and using two actual designs for plant growth systems. While life support is theoretically not very demanding, our ability to implement life support is well below theoretical limits. A theoretical limit has been calculated from requirements and the state of the art for plant growth has been calculated using data from the BIO-Plex PDR and from the Cornell CEA prototype system. The very low efficiency of our current approaches results in a high mission impact, though we can still see how to get a significant reduction in cost of food when compared to supplying it from Earth. Seeing the distribution of costs should allow us to improve our current designs. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

The minimal cost of life in space

NASA Technical Reports Server (NTRS)

Drysdale, A. E.; Rutkze, C. J.; Albright, L. D.; LaDue, R. L.

2004-01-01

The cost of keeping people alive in space is assessed from a theoretical viewpoint and using two actual designs for plant growth systems. While life support is theoretically not very demanding, our ability to implement life support is well below theoretical limits. A theoretical limit has been calculated from requirements and the state of the art for plant growth has been calculated using data from the BIO-Plex PDR and from the Cornell CEA prototype system. The very low efficiency of our current approaches results in a high mission impact, though we can still see how to get a significant reduction in cost of food when compared to supplying it from Earth. Seeing the distribution of costs should allow us to improve our current designs. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

Tailoring a response to youth binge drinking in an Aboriginal Australian community: a grounded theory study.

PubMed

McCalman, Janya; Tsey, Komla; Bainbridge, Roxanne; Shakeshaft, Anthony; Singleton, Michele; Doran, Christopher

2013-08-07

While Aboriginal Australian health providers prioritise identification of local community health needs and strategies, they do not always have the opportunity to access or interpret evidence-based literature to inform health improvement innovations. Research partnerships are therefore important when designing or modifying Aboriginal Australian health improvement initiatives and their evaluation. However, there are few models that outline the pragmatic steps by which research partners negotiate to develop, implement and evaluate community-based initiatives. The objective of this paper is to provide a theoretical model of the tailoring of health improvement initiatives by Aboriginal community-based service providers and partner university researchers. It draws from the case of the Beat da Binge community-initiated youth binge drinking harm reduction project in Yarrabah. A theoretical model was developed using the constructivist grounded theory methods of concurrent sampling, data collection and analysis. Data was obtained from the recordings of reflective Community-Based Participatory Research (CBPR) processes with Aboriginal community partners and young people, and university researchers. CBPR data was supplemented with interviews with theoretically sampled project participants. The transcripts of CBPR recordings and interviews were imported into NVIVO and coded to identify categories and theoretical constructs. The identified categories were then developed into higher order concepts and the relationships between concepts identified until the central purpose of those involved in the project and the core process that facilitated that purpose were identified. The tailored alcohol harm reduction project resulted in clarification of the underlying local determinants of binge drinking, and a shift in the project design from a social marketing awareness campaign (based on short-term events) to a more robust advocacy for youth mentoring into education, employment and training. The community-based process undertaken by the research partnership to tailor the design, implementation and evaluation of the project was theorised as a model incorporating four overlapping stages of negotiating knowledges and meanings to tailor a community response. The theoretical model can be applied in spaces where local Aboriginal and scientific knowledges meet to support the tailored design, implementation and evaluation of other health improvement projects, particularly those that originate from Aboriginal communities themselves.

Polarization characteristics of an altazimuth sky scanner

NASA Technical Reports Server (NTRS)

Garrison, L. M.; Blaszczak, Z.; Green, A. E. S.

1980-01-01

A theoretical description of the polarization characteristics of an altazimuth sky scanner optical system based on Mueller-Stokes calculus is presented. This computer-driven optical system was designed to perform laboratory studies of skylight and of celestial objects during day or night, and has no space limitations; however, the two parallel 45 deg tilt mirrors introduce some intrinsic polarization. Therefore, proper data interpretation requires a theoretical understanding of the polarization features of the instrument and accurate experimental determination of the Mueller-Stokes matrix elements describing the polarizing and depolarizing action of the system.

Bayesian randomized clinical trials: From fixed to adaptive design.

PubMed

Yin, Guosheng; Lam, Chi Kin; Shi, Haolun

2017-08-01

Randomized controlled studies are the gold standard for phase III clinical trials. Using α-spending functions to control the overall type I error rate, group sequential methods are well established and have been dominating phase III studies. Bayesian randomized design, on the other hand, can be viewed as a complement instead of competitive approach to the frequentist methods. For the fixed Bayesian design, the hypothesis testing can be cast in the posterior probability or Bayes factor framework, which has a direct link to the frequentist type I error rate. Bayesian group sequential design relies upon Bayesian decision-theoretic approaches based on backward induction, which is often computationally intensive. Compared with the frequentist approaches, Bayesian methods have several advantages. The posterior predictive probability serves as a useful and convenient tool for trial monitoring, and can be updated at any time as the data accrue during the trial. The Bayesian decision-theoretic framework possesses a direct link to the decision making in the practical setting, and can be modeled more realistically to reflect the actual cost-benefit analysis during the drug development process. Other merits include the possibility of hierarchical modeling and the use of informative priors, which would lead to a more comprehensive utilization of information from both historical and longitudinal data. From fixed to adaptive design, we focus on Bayesian randomized controlled clinical trials and make extensive comparisons with frequentist counterparts through numerical studies. Copyright © 2017 Elsevier Inc. All rights reserved.

Sexuality Education for Young People: A Theoretically Integrated Approach from Australia

ERIC Educational Resources Information Center

Goldman, Juliette D. G.

2010-01-01

Background: Teachers of sexuality education can often be uncertain about what theoretical basis and pedagogical strategies to use in their teaching. Sexuality educational programmes designed by teachers can often show few evident theoretical principles that have been applied in its construction. Thus, there seems to be a dearth of evidence of ways…

Some New Theoretical Issues in Systems Thinking Relevant for Modelling Corporate Learning

ERIC Educational Resources Information Center

Minati, Gianfranco

2007-01-01

Purpose: The purpose of this paper is to describe fundamental concepts and theoretical challenges with regard to systems, and to build on these in proposing new theoretical frameworks relevant to learning, for example in so-called learning organizations. Design/methodology/approach: The paper focuses on some crucial fundamental aspects introduced…

The Importance of Theoretical Frameworks and Mathematical Constructs in Designing Digital Tools

ERIC Educational Resources Information Center

Trinter, Christine

2016-01-01

The increase in availability of educational technologies over the past few decades has not only led to new practice in teaching mathematics but also to new perspectives in research, methodologies, and theoretical frameworks within mathematics education. Hence, the amalgamation of theoretical and pragmatic considerations in digital tool design…

Feeling bad about progress does not lead people want to change their health behaviour.

PubMed

Reynolds, James P; Webb, Thomas L; Benn, Yael; Chang, Betty P I; Sheeran, Paschal

2018-02-01

When do people decide to do something about problematic health behaviours? Theoretical models and pragmatic considerations suggest that people should take action when they feel bad about their progress - in other words, when they experience negative progress-related affect. However, the impact of progress-related affect on goal striving has rarely been investigated. Study 1 (N = 744) adopted a cross-sectional design and examined the extent to which measures of progress-related affect were correlated with intentions to take action. Study 2 (N = 409) investigated the impact of manipulating progress-related affect on intentions and behaviour in an experimental design. Study 1 found that, while engaging in health behaviours had the expected affective consequences (e.g. people felt bad when they were not eating healthily, exercising regularly or limiting their alcohol consumption), it was feeling good rather than bad about progress that was associated with stronger intentions. Study 2 replicated these findings. Participants induced to feel good about their eating behaviour had marginally stronger intentions to eat healthily than participants led to feel bad about their eating behaviour. The findings have implications for interventions designed to promote changes in health behaviour, as well as theoretical frameworks for understanding self-regulation.

Why people continue to play online games: in search of critical design factors to increase customer loyalty to online contents.

PubMed

Choi, Dongseong; Kim, Jinwoo

2004-02-01

As people increasingly play online games, numerous new features have been proposed to increase players' log-on time at online gaming sites. However, few studies have investigated why people continue to play certain online games or which design features are most closely related to the amount of time spent by players at particular online gaming sites. This study proposes a theoretical model using the concepts of customer loyalty, flow, personal interaction, and social interaction to explain why people continue to play online network games. The study then conducts a large-scale survey to validate the model. Finally, it analyzes current online games to identify design features that are closely related to the theoretical concepts. The results indicate that people continue to play online games if they have optimal experiences while playing the games. This optimal experience can be attained if the player has effective personal interaction with the system or pleasant social interactions with other people connected to the Internet. Personal interaction can be facilitated by providing appropriate goals, operators and feedback; social interaction can be facilitated through appropriate communication places and tools. This paper ends with the implications of applying the study results to other domains such as e-commerce and cyber communities.

Noise Figure Optimization of Fully Integrated Inductively Degenerated Silicon Germanium HBT LNAs

NASA Astrophysics Data System (ADS)

Ibrahim, Mohamed Farhat

Silicon germanium (SiGe) heterojunction bipolar transistors (HBTs) have the properties of producing very low noise and high gain over a wide bandwidth. Because of these properties, SiGe HBTs have continually improved and now compete with InP and GaAs HEMTs for low-noise amplification. This thesis investigates the theoretical characterizations and optimizations of SiGe HBT low noise amplifiers (LNAs) for low-noise low-power applications, using SiGe BiCMOS (bipolar complementary metal-oxide-semiconductor) technology. The theoretical characterization of SiGe HBT transistors is investigated by a comprehensive study of the DC and small-signal transistor modeling. Based on a selected small-signal model, a noise model for the SiGe HBT transistor is produced. This noise model is used to build a cascode inductively degenerated SiGe HBT LNA circuit. The noise figure (NF) equation for this LNA is derived. This NF equation shows better than 94.4% agreement with the simulation results. With the small-signal model verification, a new analytical method for optimizing the noise figure of the SiGe HBT LNA circuits is presented. The novelty feature of this optimization is the inclusion of the noise contributions of the base inductor parasitic resistance, the emitter inductor parasitic resistance and the bond-wire inductor parasitic resistances. The optimization is performed by reducing the number of design variables as possible. This improved theoretical optimization results in LNA designs that achieve better noise figure performance compared to previously published results in bipolar and BiCMOS technologies. Different design constraints are discussed for the LNA optimization techniques. Three different LNAs are designed. The three designs are fully integrated and fabricated in a single chip to achieve a fully monolithic realization. The LNA designs are experimentally verified. The low noise design produced a NF of 1.5dB, S21 of 15dB, and power consumption of 15mW. The three LNA designs occupied 1.4mum 2 in 130 nm BiCMOS technology.

Teacher Self-Efficacy and Occupational Stress: A Major Australian Curriculum Reform Revisited

ERIC Educational Resources Information Center

McCormick, John; Ayres, Paul L.

2009-01-01

Purpose: The purpose of this research was to study teachers' self-efficacy and occupational stress in the context of a large-scale curriculum reform in New South Wales, Australia. The study aims to follow up and replicate a study carried out approximately one year earlier. Design/methodology/approach: A theoretical framework, primarily based on…

Improving Program Design and Assessment with Broadening Participation Resources

NASA Astrophysics Data System (ADS)

Siegfried, D.; Johnson, A.; Thomas, S. H.; Fauver, A.; Detrick, L.

2012-12-01

Many theoretical and research-based approaches suggest how to best use mentoring to enhance an undergraduate research program. The Institute for Broadening Participation's Pathways to Engineering and Pathways to Ocean Sciences projects synthesized a set of mentoring studies, theoretical sources, and other texts pertinent to undergraduate research program design into a suite of practical tools that includes an online mentoring manual, an online reference library of mentoring and diversity literature, and practical guides such as Using Social Media to Build Diversity in Your REU. The overall goal is to provide easy-to-access resources that can assist faculty and program directors in implementing or honing the mentoring elements in their research programs for undergraduates. IBP's Online Mentoring Manual addresses common themes, such as modeling, student self-efficacy, career development, retention and evaluation. The Online Diversity Reference Library provides a comprehensive, annotated selection of key policy documents, research studies, intervention studies, and other texts on broadening participation in science, technology, engineering and mathematics. IBP's suite of tools provides the theoretical underpinnings and research findings that can help leaders in education integrate site-appropriate mentoring elements into their educational programs. Program directors and faculty from a variety of program types and disciplines have benefitted from using the Manual and other resources. IBP continues the work of translating and synthesizing theory to practice and welcomes your participation and partnership in that effort.

Developing a theoretical foundation to change road user behavior and improve traffic safety: Driving under the influence of cannabis (DUIC).

PubMed

Ward, Nicholas J; Schell, William; Kelley-Baker, Tara; Otto, Jay; Finley, Kari

2018-05-19

This study explored a theoretical model to assess the influence of culture on willingness and intention to drive under the influence of cannabis (DUIC). This model is expected to guide the design of strategies to change future DUIC behavior in road users. This study used a survey methodology to obtain a nationally representative sample (n = 941) from the AmeriSpeak Panel. Survey items were designed to measure aspects of a proposed definition of traffic safety culture and a predictive model of its relationship to DUIC. Although the percentage of reported past DUIC behaviors was relatively low (8.5%), this behavior is still a significant public health issue-especially for younger drivers (18-29 years), who reported more DUIC than expected. Findings suggest that specific cultural components (attitudes, norms) reliably predict past DUIC behavior, general DUIC willingness, and future DUIC intention. Most DUIC behavior appears to be deliberate, related significantly to willingness and intention. Intention and willingness both appear to fully moderate the relationship between traffic safety culture and DUIC behavior. This study explored a theoretical model to understand road user behavior involving drug (cannabis)-impaired driving as a significant risk factor for traffic safety. By understanding the cultural factors that increase DUIC behavior, we can create strategies to transform this culture and sustain safer road user behavior.

The Cardiovascular Intervention Improvement Telemedicine Study (CITIES): Rationale for a Tailored Behavioral and Educational Pharmacist-Administered Intervention for Achieving Cardiovascular Disease Risk Reduction

PubMed Central

Zullig, Leah L.; Melnyk, S. Dee; Stechuchak, Karen M.; McCant, Felicia; Danus, Susanne; Oddone, Eugene; Bastian, Lori; Olsen, Maren; Edelman, David; Rakley, Susan; Morey, Miriam

2014-01-01

Abstract Background: Hypertension, hyperlipidemia, and diabetes are significant, but often preventable, contributors to cardiovascular disease (CVD) risk. Medication and behavioral nonadherence are significant barriers to successful hypertension, hyperlidemia, and diabetes management. Our objective was to describe the theoretical framework underlying a tailored behavioral and educational pharmacist-administered intervention for achieving CVD risk reduction. Materials and Methods: Adults with poorly controlled hypertension and/or hyperlipidemia were enrolled from three outpatient primary care clinics associated with the Durham Veterans Affairs Medical Center (Durham, NC). Participants were randomly assigned to receive a pharmacist-administered, tailored, 1-year telephone-based intervention or usual care. The goal of the study was to reduce the risk for CVD through a theory-driven intervention to increase medication adherence and improve health behaviors. Results: Enrollment began in November 2011 and is ongoing. The target sample size is 500 patients. Conclusions: The Cardiovascular Intervention Improvement Telemedicine Study (CITIES) intervention has been designed with a strong theoretical underpinning. The theoretical foundation and intervention are designed to encourage patients with multiple comorbidities and poorly controlled CVD risk factors to engage in home-based monitoring and tailored telephone-based interventions. Evidence suggests that clinical pharmacist-administered telephone-based interventions may be efficiently integrated into primary care for patients with poorly controlled CVD risk factors. PMID:24303930

Religious Attendance and Loneliness in Later Life

PubMed Central

Rote, Sunshine; Hill, Terrence D.; Ellison, Christopher G.

2013-01-01

Purpose of the Study:  Studies show that loneliness is a major risk factor for health issues in later life. Although research suggests that religious involvement can protect against loneliness, explanations for this general pattern are underdeveloped and undertested. In this paper, we propose and test a theoretical model, which suggests that social integration and social support are key mechanisms that link religious attendance and loneliness. Design and Methods:  To formally test our theoretical model, we use data from the National Social Life Health and Aging Project (2005/2006), a large national probability sample of older adults aged 57–85 years. Results:  We find that religious attendance is associated with higher levels of social integration and social support and that social integration and social support are associated with lower levels of loneliness. A series of mediation tests confirm our theoretical model. Implications:  Taken together, our results suggest that involvement in religious institutions may protect against loneliness in later life by integrating older adults into larger and more supportive social networks. Future research should test whether these processes are valid across theoretically relevant subgroups. PMID:22555887

A Model for the Stop Planning and Timetables of Customized Buses

PubMed Central

Yang, Yang

2017-01-01

Customized buses (CBs) are a new mode of public transportation and an important part of diversified public transportation, providing advanced, attractive and user-led service. The operational activity of a CB is planned by aggregating space–time demand and similar passenger travel demands. Based on an analysis of domestic and international research and the current development of CBs in China and considering passenger travel data, this paper studies the problems associated with the operation of CBs, such as stop selection, line planning and timetables, and establishes a model for the stop planning and timetables of CBs. The improved immune genetic algorithm (IIGA) is used to solve the model with regard to the following: 1) multiple population design and transport operator design, 2) memory library design, 3) mutation probability design and crossover probability design, and 4) the fitness calculation of the gene segment. Finally, a real-world example in Beijing is calculated, and the model and solution results are verified and analyzed. The results illustrate that the IIGA solves the model and is superior to the basic genetic algorithm in terms of the number of passengers, travel time, average passenger travel time, average passenger arrival time ahead of schedule and total line revenue. This study covers the key issues involving operational systems of CBs, combines theoretical research and empirical analysis, and provides a theoretical foundation for the planning and operation of CBs. PMID:28056041

A Model for the Stop Planning and Timetables of Customized Buses.

PubMed

Ma, Jihui; Zhao, Yanqing; Yang, Yang; Liu, Tao; Guan, Wei; Wang, Jiao; Song, Cuiying

2017-01-01

Customized buses (CBs) are a new mode of public transportation and an important part of diversified public transportation, providing advanced, attractive and user-led service. The operational activity of a CB is planned by aggregating space-time demand and similar passenger travel demands. Based on an analysis of domestic and international research and the current development of CBs in China and considering passenger travel data, this paper studies the problems associated with the operation of CBs, such as stop selection, line planning and timetables, and establishes a model for the stop planning and timetables of CBs. The improved immune genetic algorithm (IIGA) is used to solve the model with regard to the following: 1) multiple population design and transport operator design, 2) memory library design, 3) mutation probability design and crossover probability design, and 4) the fitness calculation of the gene segment. Finally, a real-world example in Beijing is calculated, and the model and solution results are verified and analyzed. The results illustrate that the IIGA solves the model and is superior to the basic genetic algorithm in terms of the number of passengers, travel time, average passenger travel time, average passenger arrival time ahead of schedule and total line revenue. This study covers the key issues involving operational systems of CBs, combines theoretical research and empirical analysis, and provides a theoretical foundation for the planning and operation of CBs.

A randomized controlled trial of culturally adapted motivational interviewing for Hispanic heavy drinkers: Theory of Adaptation and Study Protocol

PubMed Central

Lee, Christina S.; Colby, Suzanne M.; Magill, Molly; Almeida, Joanna; Tavares, Tonya; Rohsenow, Damaris J.

2016-01-01

Background The NIH Strategic Plan prioritizes health disparities research for socially disadvantaged Hispanics, to reduce the disproportionate burden of alcohol-related negative consequences compared to other racial/ethnic groups. Cultural adaptation of evidence-based treatments, such as motivational interviewing (MI), can improve access and response to alcohol treatment. However, the lack of rigorous clinical trials designed to test the efficacy and theoretical underpinnings of cultural adaptation has made proof of concept difficult. Objective The CAMI2 (Culturally Adapted Motivational Interviewing) study design and its theoretical model, is described to illustrate how MI adapted to social and cultural factors (CAMI) can be discriminated against non-adapted MI. Methods and Design CAMI2, a large, 12 month randomized prospective trial, examines the efficacy of CAMI and MI among heavy drinking Hispanics recruited from the community (n=257). Outcomes are reductions in heavy drinking days (Time Line Follow-Back) and negative consequences of drinking among Hispanics (Drinkers Inventory of Consequences). A second aim examines perceived acculturation stress as a moderator of treatment outcomes in the CAMI condition. Summary The CAMI2 study design protocol is presented and the theory of adaptation is presented. Findings from the trial described may yield important recommendations on the science of cultural adaptation and improve MI dissemination to Hispanics with alcohol risk. PMID:27565832

Three-meter telescope study

NASA Technical Reports Server (NTRS)

Wissinger, A.; Scott, R. M.; Peters, W.; Augustyn, W., Jr.; Arnold, R.; Offner, A.; Damast, M.; Boyce, B.; Kinnaird, R.; Mangus, J. D.

1971-01-01

A means is presented whereby the effect of various changes in the most important parameters of a three meter aperature space astronomy telescope can be evaluated to determine design trends and to optimize the optical design configuration. Methods are defined for evaluating the theoretical optical performance of axisymmetric, centrally obscured telescopes based upon the intended astronomy research usage. A series of design parameter variations is presented to determine the optimum telescope configuration. The design optimum requires very fast primary mirrors, so the study also examines the current state of the art in fabricating large, fast primary mirrors. The conclusion is that a 3-meter primary mirror having a focal ratio as low as f/2 is feasible using currently established techniques.

An Exploration of Interrelationships among Presence Indicators of a Community of Inquiry in a 3D Game-Like Environment for High School Programming Courses

ERIC Educational Resources Information Center

Pellas, Nikolaos

2017-01-01

The combination of Open Sim and Scratch4OS can be a worthwhile innovation for introductory programming courses, using a Community of Inquiry (CoI) model as a theoretical instructional design framework. This empirical study had a threefold purpose to present: (a) an instructional design framework for the beneficial formalization of a virtual…

Camel Gate Field Effect Transistors.

DTIC Science & Technology

1983-01-01

CAMFETs can be designed to yield relatively voltage independent transconductances, large for- * ward turn-on voltages, and large gate-drain breakdown...doping. The FATFET area is 4.6 x 10- 4 cm2. I.- . - . . - , - 36 80 * Camel Gate U_-- Eperimental 60 * -Theoretical % Schottky Gate ~--Experimental CL 4...in the design of other devices. Finally, a comparative study of the reliabil- ities of CAMFETs, JFETs, and MESFETs should be attempted. 43 VII

Evaluation of the Professional Development Program on Web Based Content Development

ERIC Educational Resources Information Center

Yurdakul, Bünyamin; Uslu, Öner; Çakar, Esra; Yildiz, Derya G.

2014-01-01

The aim of this study is to evaluate the professional development program on web based content development (WBCD) designed by the Ministry of National Education (MoNE). Based on the theoretical CIPP model by Stufflebeam and Guskey's levels of evaluation, the study was carried out as a case study. The study group consisted of the courses that…

Socialism. Grade Ten, Unit Two, 10.2. Comprehensive Social Studies Curriculum for the Inner City.

ERIC Educational Resources Information Center

Malone, Helen

The socialism unit of the tenth grade level of the FICSS series (Focus on Inner City Social Studies -- see SO 008 271) explores a selected history of socialist thought and the theoretical model of socialism. Three case studies of socialism are explored: Great Britain, Sweden, and Israel. The case studies are designed to answer questions concerning…

Design study of beam position monitors for measuring second-order moments of charged particle beams

NASA Astrophysics Data System (ADS)

Yanagida, Kenichi; Suzuki, Shinsuke; Hanaki, Hirofumi

2012-01-01

This paper presents a theoretical investigation on the multipole moments of charged particle beams in two-dimensional polar coordinates. The theoretical description of multipole moments is based on a single-particle system that is expanded to a multiparticle system by superposition, i.e., summing over all single-particle results. This paper also presents an analysis and design method for a beam position monitor (BPM) that detects higher-order (multipole) moments of a charged particle beam. To calculate the electric fields, a numerical analysis based on the finite difference method was created and carried out. Validity of the numerical analysis was proven by comparing the numerical with the analytical results for a BPM with circular cross section. Six-electrode BPMs with circular and elliptical cross sections were designed for the SPring-8 linac. The results of the numerical calculations show that the second-order moment can be detected for beam sizes ≧420μm (circular) and ≧550μm (elliptical).

Predictors of Workplace Deviant Behaviour: HRD Agenda for Malaysian Support Personnel

ERIC Educational Resources Information Center

Alias, Mazni; Rasdi, Roziah Mohd; Ismail, Maimunah; Samah, Bahaman Abu

2013-01-01

Purpose: The purpose of this paper is to develop a theoretical model of the determinants of workplace deviant behaviour among support personnel in Malaysian Public Service organisations. Design/methodology/approach: This study is based on reviews of past studies on workplace deviant behaviour. To conduct the literature review, several keywords…

Form and Function of Educational Technology in Developmental Curricula in a Community College

ERIC Educational Resources Information Center

Hess, Patrice M.

2012-01-01

This qualitative action research study examines the form (where and how) and function (specific use) of Educational Technology in developmental curricula at a community college. The study uses theoretical frameworks of Educational Technology and Instructional Systems Design to review and analyze curricular materials (print and electronic) and…

Student Use of Scaffolding Software: Relationships with Motivation and Conceptual Understanding

ERIC Educational Resources Information Center

Butler, Kyle A.; Lumpe, Andrew

2008-01-01

This study was designed to theoretically articulate and empirically assess the role of computer scaffolds. In this project, several examples of educational software were developed to scaffold the learning of students performing high level cognitive activities. The software used in this study, Artemis, focused on scaffolding the learning of…

The Development of Prosocial Behavior in Adolescents: A Mixed Methods Study from NOLS

ERIC Educational Resources Information Center

Furman, Nate; Sibthorp, Jim

2014-01-01

Learning transfer and prosocial behavior (PSB) are critical components of many outdoor education programs for adolescents. This study examined the effects of a theoretically grounded treatment curriculum designed to foster the transfer of learning of general and contextual PSB (also called expedition behavior) among adolescents enrolled on 14-day…

Situationally Embodied Curriculum: Relating Formalisms and Contexts

ERIC Educational Resources Information Center

Barab, Sasha; Zuiker, Steve; Warren, Scott; Hickey, Dan; Ingram-Goble, Adam; Kwon, Eun-Ju; Kouper, Inna; Herring, Susan C.

2007-01-01

This study describes an example of design-based research in which we make theoretical improvements in our understanding, in part based on empirical work, and use these to revise our curriculum and, simultaneously, our evolving theory of the relations between contexts and disciplinary formalisms. Prior to this study, we completed a first cycle of…

Assessing Sensitivity of Early Head Start Study Findings to Manipulated Randomization Threats

ERIC Educational Resources Information Center

Green, Sheridan

2013-01-01

Increasing demands for design rigor and an emphasis on evidence-based practice on a national level indicated a need for further guidance related to successful implementation of randomized studies in education. Rigorous and meaningful experimental research and its conclusions help establish a valid theoretical and evidence base for educational…

An Empirical Typology of Residential Care/Assisted Living Based on a Four-State Study

ERIC Educational Resources Information Center

Park, Nan Sook; Zimmerman, Sheryl; Sloane, Philip D.; Gruber-Baldini, Ann L.; Eckert, J. Kevin

2006-01-01

Purpose: Residential care/assisted living describes diverse facilities providing non-nursing home care to a heterogeneous group of primarily elderly residents. This article derives typologies of assisted living based on theoretically and practically grounded evidence. Design and Methods: We obtained data from the Collaborative Studies of Long-Term…

Early Career Teachers' Emotional Experiences and Development--A Norwegian Case Study

ERIC Educational Resources Information Center

Jakhelln, Rachel

2011-01-01

Emotional experiences that are an integral part of the process of becoming teachers have been insufficiently explored in the research literature. The early experiences of three new teachers in a Norwegian upper secondary school are analysed using a collective case-study design and a socio-cultural theoretical framework. Emotions arising in the…

Organizational Support and Volunteering Benefits for Older Adults

ERIC Educational Resources Information Center

Tang, Fengyan; Choi, Eunhee; Morrow-Howell, Nancy

2010-01-01

Purpose: This study tested a theoretical model of volunteering benefits and examined the mechanism through which volunteering benefits older adults. Design and Methods: This is a 2-wave study of 253 older adult volunteers serving in 10 volunteer programs. Older volunteers completed the mailed surveys in 2005 and 2006. Structural equation modeling…

Urban Adolescents' Exercise Intentions and Behaviors: An Exploratory Study of a Trans-Contextual Model

ERIC Educational Resources Information Center

Shen, Bo; McCaughtry, Nate; Martin, Jeffrey

2008-01-01

Using a multi-theory approach, the current study was designed to identify gender differences in the psychological mechanisms by which urban adolescents' motivation in physical education transfers into their leisure-time activities. The theoretical frameworks of Self-Determination Theory and the Theory of Planned Behavior were integrated to…

A Two-Study Examination of Work-Family Conflict, Production Deviance and Gender

ERIC Educational Resources Information Center

Ferguson, Merideth; Carlson, Dawn; Hunter, Emily M.; Whitten, Dwayne

2012-01-01

Building on the spillover and crossover literatures of work-family conflict and the theoretical framework of Conservation of Resources Theory (Hobfoll, 1989) we examine the effects of conflict on production deviance. Using a two-study constructive replication and extension design, we examine how partner work-to-family conflict contributes to job…

Web-Assisted Instruction in Upper Division Communication Studies Curriculum: A Theoretical and Quantitative Analysis

ERIC Educational Resources Information Center

Olaniran, Bolanle; Austin, Katherine A.

2009-01-01

Purpose: This paper aims to describe the incorporation of technologies into two upper division Communication Studies courses at Texas Tech University. Design/methodology/approach: The article discusses the methodological and pedagogical rationale used to select the appropriate technologies and to effectively incorporate them into the classroom. An…

Decision-Making Training for Occupational Choice and Early Turnover: A Field Experiment

ERIC Educational Resources Information Center

Pazy, Asya; Ganzach, Yoav; Davidov, Yariv

2006-01-01

Purpose: The study seeks to examine how a short intervention, aimed at enhancing occupational choice skills, influences turnover during the early stages of organizational membership. It seeks to explore two theoretical rationales for this effect: social exchange and self-determination. Design/methodology/approach: The study is a "constructive…

Educational Leadership in a Competitive State: A Contradiction in Terms?

ERIC Educational Resources Information Center

Moos, Lejf

2012-01-01

Purpose: The purpose of this paper is to explore how important the choice of theoretical perspective is on the analyses of empirical data from a Danish case study. Design/methodology/approach: The empirical bases for the analyses are qualitative, longitudinal case studies of school leadership in the International Successful School Principalship…

Platform construction and extraction mechanism study of magnetic mixed hemimicelles solid-phase extraction

PubMed Central

Xiao, Deli; Zhang, Chan; He, Jia; Zeng, Rong; Chen, Rong; He, Hua

2016-01-01

Simple, accurate and high-throughput pretreatment method would facilitate large-scale studies of trace analysis in complex samples. Magnetic mixed hemimicelles solid-phase extraction has the power to become a key pretreatment method in biological, environmental and clinical research. However, lacking of experimental predictability and unsharpness of extraction mechanism limit the development of this promising method. Herein, this work tries to establish theoretical-based experimental designs for extraction of trace analytes from complex samples using magnetic mixed hemimicelles solid-phase extraction. We selected three categories and six sub-types of compounds for systematic comparative study of extraction mechanism, and comprehensively illustrated the roles of different force (hydrophobic interaction, π-π stacking interactions, hydrogen-bonding interaction, electrostatic interaction) for the first time. What’s more, the application guidelines for supporting materials, surfactants and sample matrix were also summarized. The extraction mechanism and platform established in the study render its future promising for foreseeable and efficient pretreatment under theoretical based experimental design for trace analytes from environmental, biological and clinical samples. PMID:27924944

How system designers think: a study of design thinking in human factors engineering.

PubMed

Papantonopoulos, Sotiris

2004-11-01

The paper presents a descriptive study of design thinking in human factors engineering. The objective of the study is to analyse the role of interpretation in design thinking and the role of design practice in guiding interpretation. The study involved 10 system designers undertaking the allocation of cognitive functions in three production planning and control task scenarios. Allocation decisions were recorded and verbal protocols of the design process were collected to elicit the subjects' thought processes. Verbal protocol analysis showed that subjects carried out the design of cognitive task allocation as a problem of applying a selected automation technology from their initial design deliberations. This design strategy stands in contrast to the predominant view of system design that stipulates that user requirements should be thoroughly analysed prior to making any decisions about technology. Theoretical frameworks from design research and ontological design showed that the system design process may be better understood by recognizing the role of design hypotheses in system design, as well as the diverse interactions between interpretation and practice, means and ends, and design practice and the designer's pre-understanding which shape the design process. Ways to balance the bias exerted on the design process were discussed.

Information Architecture: Notes toward a New Curriculum.

ERIC Educational Resources Information Center

Latham, Don

2002-01-01

Considers the evolution of information architectures as a field of professional education. Topics include the need for an interdisciplinary approach; balancing practical skills with theoretical concepts; and key content areas, including information organization, graphic design, computer science, user and usability studies, and communication.…

Exploring Chaos: A Case Study.

ERIC Educational Resources Information Center

Nemirovsky, Ricardo; Tinker, Robert

1993-01-01

Describes software, hardware, and devices that were designed to provide students with an environment to experiment with basic ideas of mechanics, including nonlinear dynamics. Examines the behavior of a Lorenzian water wheel by comparing experimental data with theoretical results obtained from computer-based sensors. (MDH)

Reference Assessment

ERIC Educational Resources Information Center

Bivens-Tatum, Wayne

2006-01-01

This article presents interesting articles that explore several different areas of reference assessment, including practical case studies and theoretical articles that address a range of issues such as librarian behavior, patron satisfaction, virtual reference, or evaluation design. They include: (1) "Evaluating the Quality of a Chat Service"…

Deliverology

ERIC Educational Resources Information Center

Nordstrum, Lee E.; LeMahieu, Paul G.; Dodd, Karen

2017-01-01

Purpose: This paper is one of seven in this volume elaborating different approaches to quality improvement in education. This paper aims to delineate a methodology called Deliverology. Design/methodology/approach: The paper presents the origins, theoretical foundations, core principles and a case study showing an application of Deliverology in the…

Organizational Learning Theory in Schools

ERIC Educational Resources Information Center

Fauske, Janice R.; Raybould, Rebecca

2005-01-01

Purpose: The paper's purposes are to establish organizational learning theory as evolving from the theoretical and empirical study of organizations and to build grounded theory explaining organizational learning in schools. Design/methodology/approach: Implementation of instructional technology as a process of organizational learning was explored…

An adaptive drug delivery design using neural networks for effective treatment of infectious diseases: a simulation study.

PubMed

Padhi, Radhakant; Bhardhwaj, Jayender R

2009-06-01

An adaptive drug delivery design is presented in this paper using neural networks for effective treatment of infectious diseases. The generic mathematical model used describes the coupled evolution of concentration of pathogens, plasma cells, antibodies and a numerical value that indicates the relative characteristic of a damaged organ due to the disease under the influence of external drugs. From a system theoretic point of view, the external drugs can be interpreted as control inputs, which can be designed based on control theoretic concepts. In this study, assuming a set of nominal parameters in the mathematical model, first a nonlinear controller (drug administration) is designed based on the principle of dynamic inversion. This nominal drug administration plan was found to be effective in curing "nominal model patients" (patients whose immunological dynamics conform to the mathematical model used for the control design exactly. However, it was found to be ineffective in curing "realistic model patients" (patients whose immunological dynamics may have off-nominal parameter values and possibly unwanted inputs) in general. Hence, to make the drug delivery dosage design more effective for realistic model patients, a model-following adaptive control design is carried out next by taking the help of neural networks, that are trained online. Simulation studies indicate that the adaptive controller proposed in this paper holds promise in killing the invading pathogens and healing the damaged organ even in the presence of parameter uncertainties and continued pathogen attack. Note that the computational requirements for computing the control are very minimal and all associated computations (including the training of neural networks) can be carried out online. However it assumes that the required diagnosis process can be carried out at a sufficient faster rate so that all the states are available for control computation.

Design and evaluation of a deformable wing configuration for economical hovering flight of an insect-like tailless flying robot.

PubMed

Phan, Hoang Vu; Park, Hoon Cheol

2018-04-18

Studies on wing kinematics indicate that flapping insect wings operate at higher angles of attack (AoAs) than conventional rotary wings. Thus, effectively flying an insect-like flapping-wing micro air vehicle (FW-MAV) requires appropriate wing design for achieving low power consumption and high force generation. Even though theoretical studies can be performed to identify appropriate geometric AoAs for a wing for achieving efficient hovering flight, designing an actual wing by implementing these angles into a real flying robot is challenging. In this work, we investigated the wing morphology of an insect-like tailless FW-MAV, which was named KUBeetle, for obtaining high vertical force/power ratio or power loading. Several deformable wing configurations with various vein structures were designed, and their characteristics of vertical force generation and power requirement were theoretically and experimentally investigated. The results of the theoretical study based on the unsteady blade element theory (UBET) were validated with reference data to prove the accuracy of power estimation. A good agreement between estimated and measured results indicated that the proposed UBET model can be used to effectively estimate the power requirement and force generation of an FW-MAV. Among the investigated wing configurations operating at flapping frequencies of 23 Hz to 29 Hz, estimated results showed that the wing with a suitable vein placed outboard exhibited an increase of approximately 23.7%  ±  0.5% in vertical force and approximately 10.2%  ±  1.0% in force/power ratio. The estimation was supported by experimental results, which showed that the suggested wing enhanced vertical force by approximately 21.8%  ±  3.6% and force/power ratio by 6.8%  ±  1.6%. In addition, wing kinematics during flapping motion was analyzed to determine the reason for the observed improvement.

Number theoretical foundations in cryptography

NASA Astrophysics Data System (ADS)

Atan, Kamel Ariffin Mohd

2017-08-01

In recent times the hazards in relationships among entities in different establishments worldwide have generated exciting developments in cryptography. Central to this is the theory of numbers. This area of mathematics provides very rich source of fundamental materials for constructing secret codes. Some number theoretical concepts that have been very actively used in designing crypto systems will be highlighted in this presentation. This paper will begin with introduction to basic number theoretical concepts which for many years have been thought to have no practical applications. This will include several theoretical assertions that were discovered much earlier in the historical development of number theory. This will be followed by discussion on the "hidden" properties of these assertions that were later exploited by designers of cryptosystems in their quest for developing secret codes. This paper also highlights some earlier and existing cryptosystems and the role played by number theoretical concepts in their constructions. The role played by cryptanalysts in detecting weaknesses in the systems developed by cryptographers concludes this presentation.

Field-widened Michelson interferometer for spectral discrimination in high-spectral-resolution lidar: theoretical framework.

PubMed

Cheng, Zhongtao; Liu, Dong; Luo, Jing; Yang, Yongying; Zhou, Yudi; Zhang, Yupeng; Duan, Lulin; Su, Lin; Yang, Liming; Shen, Yibing; Wang, Kaiwei; Bai, Jian

2015-05-04

A field-widened Michelson interferometer (FWMI) is developed to act as the spectral discriminator in high-spectral-resolution lidar (HSRL). This realization is motivated by the wide-angle Michelson interferometer (WAMI) which has been used broadly in the atmospheric wind and temperature detection. This paper describes an independent theoretical framework about the application of the FWMI in HSRL for the first time. In the framework, the operation principles and application requirements of the FWMI are discussed in comparison with that of the WAMI. Theoretical foundations for designing this type of interferometer are introduced based on these comparisons. Moreover, a general performance estimation model for the FWMI is established, which can provide common guidelines for the performance budget and evaluation of the FWMI in the both design and operation stages. Examples incorporating many practical imperfections or conditions that may degrade the performance of the FWMI are given to illustrate the implementation of the modeling. This theoretical framework presents a complete and powerful tool for solving most of theoretical or engineering problems encountered in the FWMI application, including the designing, parameter calibration, prior performance budget, posterior performance estimation, and so on. It will be a valuable contribution to the lidar community to develop a new generation of HSRLs based on the FWMI spectroscopic filter.

The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists

PubMed Central

Ormerod, Marcus; Newton, Rita

2018-01-01

Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people. PMID:29682348

The Development of a Design and Construction Process Protocol to Support the Home Modification Process Delivered by Occupational Therapists.

PubMed

Russell, Rachel; Ormerod, Marcus; Newton, Rita

2018-01-01

Modifying the home environments of older people as they age in place is a well-established health and social care intervention. Using design and construction methods to redress any imbalance caused by the ageing process or disability within the home environment, occupational therapists are seen as the experts in this field of practice. However, the process used by occupational therapists when modifying home environments has been criticised for being disorganised and not founded on theoretical principles and concepts underpinning the profession. To address this issue, research was conducted to develop a design and construction process protocol specifically for home modifications. A three-stage approach was taken for the analysis of qualitative data generated from an online survey, completed by 135 occupational therapists in the UK. Using both the existing occupational therapy intervention process model and the design and construction process protocol as the theoretical frameworks, a 4-phase, 9-subphase design and construction process protocol for home modifications was developed. Overall, the study is innovative in developing the first process protocol for home modifications, potentially providing occupational therapists with a systematic and effective approach to the design and delivery of home modification services for older and disabled people.

Computational manufacturing as a bridge between design and production.

PubMed

Tikhonravov, Alexander V; Trubetskov, Michael K

2005-11-10

Computational manufacturing of optical coatings is a research area that can be placed between theoretical designing and practical manufacturing in the same way that computational physics can be placed between theoretical and experimental physics. Investigations in this area have been performed for more than 30 years under the name of computer simulation of manufacturing and monitoring processes. Our goal is to attract attention to the increasing importance of computational manufacturing at the current state of the art in the design and manufacture of optical coatings and to demonstrate possible applications of this research tool.

Computational manufacturing as a bridge between design and production

NASA Astrophysics Data System (ADS)

Tikhonravov, Alexander V.; Trubetskov, Michael K.

2005-11-01

Computational manufacturing of optical coatings is a research area that can be placed between theoretical designing and practical manufacturing in the same way that computational physics can be placed between theoretical and experimental physics. Investigations in this area have been performed for more than 30 years under the name of computer simulation of manufacturing and monitoring processes. Our goal is to attract attention to the increasing importance of computational manufacturing at the current state of the art in the design and manufacture of optical coatings and to demonstrate possible applications of this research tool.

Aerodynamic Design of a Propeller for High-Altitude Balloon Trajectory Control

NASA Technical Reports Server (NTRS)

Eppler, Richard; Somers, Dan M.

2012-01-01

The aerodynamic design of a propeller for the trajectory control of a high-altitude, scientific balloon has been performed using theoretical methods developed especially for such applications. The methods are described. Optimum, nonlinear chord and twist distributions have been developed in conjunction with the design of a family of airfoils, the SE403, SE404, and SE405, for the propeller. The very low Reynolds numbers along the propeller blade fall in a range that has yet to be rigorously investigated, either experimentally or theoretically.

Quasi-experimental study designs series-paper 9: collecting data from quasi-experimental studies.

PubMed

Aloe, Ariel M; Becker, Betsy Jane; Duvendack, Maren; Valentine, Jeffrey C; Shemilt, Ian; Waddington, Hugh

2017-09-01

To identify variables that must be coded when synthesizing primary studies that use quasi-experimental designs. All quasi-experimental (QE) designs. When designing a systematic review of QE studies, potential sources of heterogeneity-both theory-based and methodological-must be identified. We outline key components of inclusion criteria for syntheses of quasi-experimental studies. We provide recommendations for coding content-relevant and methodological variables and outlined the distinction between bivariate effect sizes and partial (i.e., adjusted) effect sizes. Designs used and controls used are viewed as of greatest importance. Potential sources of bias and confounding are also addressed. Careful consideration must be given to inclusion criteria and the coding of theoretical and methodological variables during the design phase of a synthesis of quasi-experimental studies. The success of the meta-regression analysis relies on the data available to the meta-analyst. Omission of critical moderator variables (i.e., effect modifiers) will undermine the conclusions of a meta-analysis. Copyright © 2017 Elsevier Inc. All rights reserved.

Multistage Complexity in Language Proficiency Assessment: A Framework for Aligning Theoretical Perspectives, Test Development, and Psychometrics

ERIC Educational Resources Information Center

Luecht, Richard M.

2003-01-01

This article contends that the necessary links between constructs and test scores/decisions in language assessment must be established through principled design procedures that align three models: (1) a theoretical construct model; (2) a test development model; and (3) a psychometric scoring model. The theoretical construct model articulates the…

Conducting Human Research

DTIC Science & Technology

2009-08-05

Socio-cultural data acquisition, extraction, and management.??? First the idea of a theoretical framework will be very briefly discussed as well as...SUBJECT TERMS human behavior, theoretical framework , hypothesis development, experimental design, ethical research, statistical power, human laboratory...who throw rocks? • How can we make them stay too far away to throw rocks? UNCLASSIFIED – Approved for Public Release Theoretical Framework / Conceptual

Differences between wafer and bake plate temperature uniformity in proximity bake: a theoretical and experimental study

NASA Astrophysics Data System (ADS)

Ramanan, Natarajan; Kozman, Austin; Sims, James B.

2000-06-01

As the lithography industry moves toward finer features, specifications on temperature uniformity of the bake plates are expected to become more stringent. Consequently, aggressive improvements are needed to conventional bake station designs to make them perform significantly better than current market requirements. To this end, we have conducted a rigorous study that combines state-of-the-art simulation tools and experimental methods to predict the impact of the parameters that influence the uniformity of the wafer in proximity bake. The key observation from this detailed study is that the temperature uniformity of the wafer in proximity mode depends on a number of parameters in addition to the uniformity of the bake plate itself. These parameters include the lid design, the air flow distribution around the bake chamber, bake plate design and flatness of the bake plate and wafer. By performing careful experimental studies that were guided by extensive numerical simulations, we were able to understand the relative importance of each of these parameters. In an orderly fashion, we made appropriate design changes to curtail or eliminate the nonuniformity caused by each of these parameters. After implementing all these changes, we have now been able to match or improve the temperature uniformity of the wafer in proximity with that of a contact measurement on the bake plate. The wafer temperature uniformity is also very close to the theoretically predicted uniformity of the wafer.

Strategies and arguments of ergonomic design for sustainability.

PubMed

Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

2012-01-01

Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

Conceptualizing, Designing, and Investigating Locative Media Use in Urban Space

NASA Astrophysics Data System (ADS)

Diamantaki, Katerina; Rizopoulos, Charalampos; Charitos, Dimitris; Kaimakamis, Nikos

This chapter investigates the social implications of locative media (LM) use and attempts to outline a theoretical framework that may support the design and implementation of location-based applications. Furthermore, it stresses the significance of physical space and location awareness as important factors that influence both human-computer interaction and computer-mediated communication. The chapter documents part of the theoretical aspect of the research undertaken as part of LOcation-based Communication Urban NETwork (LOCUNET), a project that aims to investigate the way users interact with one another (human-computer-human interaction aspect) and with the location-based system itself (human-computer interaction aspect). A number of relevant theoretical approaches are discussed in an attempt to provide a holistic theoretical background for LM use. Additionally, the actual implementation of the LOCUNET system is described and some of the findings are discussed.

The theoretical ultimate magnetoelectric coefficients of magnetoelectric composites by optimization design

NASA Astrophysics Data System (ADS)

Wang, H.-L.; Liu, B.

2014-03-01

This paper investigates what is the largest magnetoelectric (ME) coefficient of ME composites, and how to realize it. From the standpoint of energy conservation, a theoretical analysis is carried out on an imaginary lever structure consisting of a magnetostrictive phase, a piezoelectric phase, and a rigid lever. This structure is a generalization of various composite layouts for optimization on ME effect. The predicted theoretical ultimate ME coefficient plays a similar role as the efficiency of ideal heat engine in thermodynamics, and is used to evaluate the existing typical ME layouts, such as the parallel sandwiched layout and the serial layout. These two typical layouts exhibit ME coefficient much lower than the theoretical largest values, because in the general analysis the stress amplification ratio and the volume ratio can be optimized independently and freely, but in typical layouts they are dependent or fixed. To overcome this shortcoming and achieve the theoretical largest ME coefficient, a new design is presented. In addition, it is found that the most commonly used electric field ME coefficient can be designed to be infinitely large. We doubt the validity of this coefficient as a reasonable ME effect index and consider three more ME coefficients, namely the electric charge ME coefficient, the voltage ME coefficient, and the static electric energy ME coefficient. We note that the theoretical ultimate value of the static electric energy ME coefficient is finite and might be a more proper measure of ME effect.

The theoretical ultimate magnetoelectric coefficients of magnetoelectric composites by optimization design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, H.-L.; Liu, B., E-mail: liubin@tsinghua.edu.cn

2014-03-21

This paper investigates what is the largest magnetoelectric (ME) coefficient of ME composites, and how to realize it. From the standpoint of energy conservation, a theoretical analysis is carried out on an imaginary lever structure consisting of a magnetostrictive phase, a piezoelectric phase, and a rigid lever. This structure is a generalization of various composite layouts for optimization on ME effect. The predicted theoretical ultimate ME coefficient plays a similar role as the efficiency of ideal heat engine in thermodynamics, and is used to evaluate the existing typical ME layouts, such as the parallel sandwiched layout and the serial layout.more » These two typical layouts exhibit ME coefficient much lower than the theoretical largest values, because in the general analysis the stress amplification ratio and the volume ratio can be optimized independently and freely, but in typical layouts they are dependent or fixed. To overcome this shortcoming and achieve the theoretical largest ME coefficient, a new design is presented. In addition, it is found that the most commonly used electric field ME coefficient can be designed to be infinitely large. We doubt the validity of this coefficient as a reasonable ME effect index and consider three more ME coefficients, namely the electric charge ME coefficient, the voltage ME coefficient, and the static electric energy ME coefficient. We note that the theoretical ultimate value of the static electric energy ME coefficient is finite and might be a more proper measure of ME effect.« less

Experimental and theoretical study of magnetohydrodynamic ship models.

PubMed

Cébron, David; Viroulet, Sylvain; Vidal, Jérémie; Masson, Jean-Paul; Viroulet, Philippe

2017-01-01

Magnetohydrodynamic (MHD) ships represent a clear demonstration of the Lorentz force in fluids, which explains the number of students practicals or exercises described on the web. However, the related literature is rather specific and no complete comparison between theory and typical small scale experiments is currently available. This work provides, in a self-consistent framework, a detailed presentation of the relevant theoretical equations for small MHD ships and experimental measurements for future benchmarks. Theoretical results of the literature are adapted to these simple battery/magnets powered ships moving on salt water. Comparison between theory and experiments are performed to validate each theoretical step such as the Tafel and the Kohlrausch laws, or the predicted ship speed. A successful agreement is obtained without any adjustable parameter. Finally, based on these results, an optimal design is then deduced from the theory. Therefore this work provides a solid theoretical and experimental ground for small scale MHD ships, by presenting in detail several approximations and how they affect the boat efficiency. Moreover, the theory is general enough to be adapted to other contexts, such as large scale ships or industrial flow measurement techniques.

Experimental and theoretical study of magnetohydrodynamic ship models

PubMed Central

Viroulet, Sylvain; Vidal, Jérémie; Masson, Jean-Paul; Viroulet, Philippe

2017-01-01

Magnetohydrodynamic (MHD) ships represent a clear demonstration of the Lorentz force in fluids, which explains the number of students practicals or exercises described on the web. However, the related literature is rather specific and no complete comparison between theory and typical small scale experiments is currently available. This work provides, in a self-consistent framework, a detailed presentation of the relevant theoretical equations for small MHD ships and experimental measurements for future benchmarks. Theoretical results of the literature are adapted to these simple battery/magnets powered ships moving on salt water. Comparison between theory and experiments are performed to validate each theoretical step such as the Tafel and the Kohlrausch laws, or the predicted ship speed. A successful agreement is obtained without any adjustable parameter. Finally, based on these results, an optimal design is then deduced from the theory. Therefore this work provides a solid theoretical and experimental ground for small scale MHD ships, by presenting in detail several approximations and how they affect the boat efficiency. Moreover, the theory is general enough to be adapted to other contexts, such as large scale ships or industrial flow measurement techniques. PMID:28665941

The Influence of Public Pedagogy on Adult and Higher Education Learners' Perceptions of and Motivations to Study Abroad at a Hispanic Serving Institution

ERIC Educational Resources Information Center

Nguyen, Shelbee Rhea

2012-01-01

This study utilized qualitative single-case study design to provide rich description and offer new understandings within a socio-cultural theoretical frame about how adult and higher education learners perceive and are motivated to participate in study abroad programs. Three faculty-led study abroad courses at a Hispanic serving institution in the…

Chemical Education Research: Improving Chemistry Learning

NASA Astrophysics Data System (ADS)

Dudley Herron, J.; Nurrenbern, Susan C.

1999-10-01

Chemical education research is the systematic investigation of learning grounded in a theoretical foundation that focuses on understanding and improving learning of chemistry. This article reviews many activities, changes, and accomplishments that have taken place in this area of scholarly activity despite its relatively recent emergence as a research area. The article describes how the two predominant broad perspectives of learning, behaviorism and constructivism, have shaped and influenced chemical education research design, analysis, and interpretation during the 1900s. Selected research studies illustrate the range of research design strategies and results that have contributed to an increased understanding of learning in chemistry. The article also provides a perspective of current and continuing challenges that researchers in this area face as they strive to bridge the gap between chemistry and education - disciplines with differing theoretical bases and research paradigms.

Studies on Single-phase and Multi-phase Heat Pipe for LED Panel for Efficient Heat Dissipation

NASA Astrophysics Data System (ADS)

Vyshnave, K. C.; Rohit, G.; Maithreya, D. V. N. S.; Rakesh, S. G.

2017-08-01

The popularity of LED panel as a source of illumination has soared recently due to its high efficiency. However, the removal of heat that is produced in the chip is still a major challenge in its design since this has an adverse effect on its reliability. If high junction temperature develops, the colour of the emitted light may diminish over prolonged usage or even a colour shift may occur. In this paper, a solution has been developed to address this problem by using a combination of heat pipe and heat fin technology. A single-phase and a two-phase heat pipes have been designed theoretically and computational simulations carried out using ANSYS FLUENT. The results of the theoretical calculations and those obtained from the simulations are found to be in agreement with each other.

Theoretical study of heat transfer with moving phase-change interface in thawing of frozen food

NASA Astrophysics Data System (ADS)

Leung, M.; Ching, W. H.; Leung, D. Y. C.; Lam, G. C. K.

2005-02-01

A theoretical solution was obtained for a transient phase-change heat transfer problem in thawing of frozen food. In the physical model, a sphere originally at a uniform temperature below the phase-change temperature is suddenly immersed in a fluid at a temperature above the phase-change temperature. As the body temperature increases, the phase-change interface will be first formed on the surface. Subsequently, the interface will absorb the latent heat and move towards the centre until the whole body undergoes complete phase change. In the mathematical formulation, the nonhomogeneous problem arises from the moving phase-change interface. The solution in terms of the time-dependent temperature field was obtained by use of Green's function. A one-step Newton-Raphson method was specially designed to solve for the position of the moving interface to satisfy the interface condition. The theoretical results were compared with numerical results generated by a finite difference model and experimental measurements collected from a cold water thawing process. As a good agreement was found, the theoretical solution developed in this study was verified numerically and experimentally. Besides thawing of frozen food, there are many other practical applications of the theoretical solution, such as food freezing, soil freezing/thawing, metal casting and bath quenching heat treatment, among others.

The Integrated Curriculum Model (ICM)

ERIC Educational Resources Information Center

VanTassel-Baska, Joyce; Wood, Susannah

2010-01-01

This article explicates the Integrated Curriculum Model (ICM) which has been used worldwide to design differentiated curriculum, instruction, and assessment units of study for gifted learners. The article includes a literature review of appropriate curriculum features for the gifted, other extant curriculum models, the theoretical basis for the…

Landscape designers, doctors, and the making of healthy urban spaces in 19th century America

Treesearch

Robert Martensen

2009-01-01

One of 18 articles inspired by the Meristem 2007 Forum, "Restorative Commons for Community Health." The articles include interviews, case studies, thought pieces, and interdisciplinary theoretical works that explore the relationship between human health and the urban...

Future Directions in Distance Learning and Communication Technologies

ERIC Educational Resources Information Center

Shih, Timothy; Hung, Jason

2007-01-01

Future Directions in Distance Learning and Communication Technologies presents theoretical studies and practical solutions for engineers, educational professionals, and graduate students in the research areas of e-learning, distance education, and instructional design. This book provides readers with cutting-edge solutions and research directions…

Towing Tank Tests on a Ram Wing in a Rectangular Guideway

DOT National Transportation Integrated Search

1973-07-01

The object of the study was to set the theoretical and experimental basis for a preliminary design of a ram wing vehicle. A simplified one-dimensional mathematical model is developed in an attempt to estimate the stability derivatives of this type of...

Invited Commentary: Beware the Test-Negative Design.

PubMed

Westreich, Daniel; Hudgens, Michael G

2016-09-01

In this issue of the Journal, Sullivan et al. (Am J Epidemiol. 2016;184(5):345-353) carefully examine the theoretical justification for use of the test-negative design, a common observational study design, in assessing the effectiveness of influenza vaccination. Using modern causal inference methods (in particular, directed acyclic graphs), they describe different threats to the validity of inferences drawn about the effect of vaccination from test-negative design studies. These threats include confounding, selection bias, and measurement error in either the exposure or the outcome. While confounding and measurement error are common in observational studies, the potential for selection bias inherent in the test-negative design brings into question the validity of inferences drawn from such studies. © The Author 2016. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Analysis of flexural wave cloaks

NASA Astrophysics Data System (ADS)

Climente, Alfonso; Torrent, Daniel; Sánchez-Dehesa, José

2016-12-01

This work presents a comprehensive study of the cloak for bending waves theoretically proposed by Farhat et al. [see Phys. Rev. Lett. 103, 024301 (2009)] and later on experimentally realized by Stenger et al. [see Phys. Rev. Lett. 108, 014301 (2012)]. This study uses a semi-analytical approach, the multilayer scattering method, which is based in the Kirchoff-Love wave equation for flexural waves in thin plates. Our approach was unable to reproduce the predicted behavior of the theoretically proposed cloak. This disagreement is here explained in terms of the simplified wave equation employed in the cloak design, which employed unusual boundary conditions for the cloaking shell. However, our approach reproduces fairly well the measured displacement maps for the fabricated cloak, indicating the validity of our approach. Also, the cloak quality has been here analyzed using the so called averaged visibility and the scattering cross section. The results obtained from both analysis let us to conclude that there is room for further improvements of this type of flexural wave cloak by using better design procedures.

Modeling out-of-plane actuation in thin-film nematic polymer networks: From chiral ribbons to auto-origami boxes via twist and topology

PubMed Central

Gimenez-Pinto, Vianney; Ye, Fangfu; Mbanga, Badel; Selinger, Jonathan V.; Selinger, Robin L. B.

2017-01-01

Various experimental and theoretical studies demonstrate that complex stimulus-responsive out-of-plane distortions such as twist of different chirality, emergence of cones, simple and anticlastic bending can be engineered and pre-programmed in a liquid crystalline rubbery material given a well-controlled director microstructure. Via 3-d finite element simulation studies, we demonstrate director-encoded chiral shape actuation in thin-film nematic polymer networks under external stimulus. Furthermore, we design two complex director fields with twisted nematic domains and nematic disclinations that encode a pattern of folds for an auto-origami box. This actuator will be flat at a reference nematic state and form four well-controlled bend distortions as orientational order changes. Device fabrication is applicable via current experimental techniques. These results are in qualitative agreement with theoretical predictions, provide insight into experimental observations, and demonstrate the value of finite element methods at the continuum level for designing and engineering liquid crystal polymeric devices. PMID:28349949

Results and conclusions: perception sensor study for high speed autonomous operations

NASA Astrophysics Data System (ADS)

Schneider, Anne; LaCelle, Zachary; Lacaze, Alberto; Murphy, Karl; Close, Ryan

2016-05-01

Previous research has presented work on sensor requirements, specifications, and testing, to evaluate the feasibility of increasing autonomous vehicle system speeds. Discussions included the theoretical background for determining sensor requirements, and the basic test setup and evaluation criteria for comparing existing and prototype sensor designs. This paper will present and discuss the continuation of this work. In particular, this paper will focus on analyzing the problem via a real-world comparison of various sensor technology testing results, as opposed to previous work that utilized more of a theoretical approach. LADAR/LIDAR, radar, visual, and infrared sensors are considered in this research. Results are evaluated against the theoretical, desired perception specifications. Conclusions for utilizing a suite of perception sensors, to achieve the goal of doubling ground vehicle speeds, is also discussed.

Theoretical Approaches in the Context of Spatial Planning Decisions and the Relation with Urban Sustainability

NASA Astrophysics Data System (ADS)

Kumlu, Kadriye Burcu Yavuz; Tüdeş, Şule

2017-10-01

The sustainability agenda has maintained its importance since the days, when the production system took its capitalist form, as well as the population in the urban areas started to rise. Increasing number of both goods and the people have caused the degradation of the certain systems, which generate the urban areas. These systems could mainly be classified as social, environmental, physical and economical systems. Today, urban areas still have difficulty to protect those systems, due to the significant demand of the population. Therefore, studies related with the sustainable issues are significant in the sense of continuity of the urban systems. Therefore, in this paper, those studies in the context of the effects of physical decisions taken in the spatial planning process on urban sustainability, will be examined. The components of the physical decisions are limited to land use, density and design. Land use decisions will be examined in the context of mixed land use. On the other hand, decisions related with density will be analyzed in the sense of population density and floor area ratio (FAR). Besides, design decisions will be examined, by linking them with neighborhood design criteria. Additionally, the term of urban sustainability will only be limited to its social and environmental contexts in this study. Briefly stated, studies in the sustainable literature concerned with the effects of land use, density and design decisions taken in the spatial planning process on the social and environmental sustainability will be examined in this paper. After the compilation and the analyze of those studies, a theoretical approach will be proposed to determine social and environmental sustainability in the context of land use, density and design decisions, taken in the spatial planning process.

Theoretical study on the thermal and optical features of a diode side-pumped alkali laser

NASA Astrophysics Data System (ADS)

Han, Juhong; Liu, Xiaoxu; Wang, Hongyuan; Cai, He; An, Guofei; Zhang, Wei; Wang, You

2018-03-01

As one of the most hopeful candidates to achieve high power performances, a diode-pumped alkali laser (DPAL) has attracted a lot of attention in the last decade. Comparing with a diode end-pumped alkali laser (DEPAL), a diode side-pumped alkali laser (DSPAL) has great potentiality to realize an even-higher output of alkali lasers. However, there are few related researching studies concern DSPAL. In this paper, we introduce a theoretical model to investigate the physical features of a double-directions side-pumped alkali laser. The distributions of the population density, temperature, and absorption power at the cross section of a vapor cell are systematically studied. The analyses should be valuable for design of a steady high-powered DPAL.

Designing added functions in engineered cementitious composites

NASA Astrophysics Data System (ADS)

Yang, En-Hua

In this dissertation, a new and systematic material design approach is developed for ECC with added functions through material microstructures linkage to composite macroscopic behavior. The thesis research embodies theoretical development by building on previous ECC micromechanical models, and experimental investigations into three specific new versions of ECC with added functions aimed at addressing societal demands of our built infrastructure. Specifically, the theoretical study includes three important ECC modeling elements: Steady-state crack propagation analyses and simulation, predictive accuracy of the fiber bridging constitutive model, and development of the rate-dependent strain-hardening criteria. The first element establishes the steady-state cracking criterion as a fundamental requirement for multiple cracking behavior in brittle matrix composites. The second element improves the accuracy of crack-width prediction in ECC. The third element establishes the micromechanics basis for impact-resistant ECC design. Three new ECCs with added functions were developed and experimentally verified in this thesis research through the enhanced theoretical framework. A green ECC incorporating a large volume of industrial waste was demonstrated to possess reduced crack width and drying shrinkage. The self-healing ECC designed with tight crack width was demonstrated to recover transport and mechanical properties after microcrack damage when exposed to wet and dry cycles. The impact-resistant ECC was demonstrated to retain tensile ductility with increased strength under moderately high strain-rate loading. These new versions of ECC with added functions are expected to contribute greatly to enhancing the sustainability, durability, and safety of civil infrastructure built with ECC. This research establishes the effectiveness of micromechanics-based design and material ingredient tailoring for ECC with added new attributes but without losing its basic tensile ductile characteristics.

Ergonomics for the inclusion of older workers in the knowledge workforce and a guidance tool for designers.

PubMed

Gonzalez, I; Morer, P

2016-03-01

The ageing of the population and the inverted population pyramid is bringing important changes to society as a whole. These changes are associated with the inclusion of an older workforce in knowledge work and the challenge they represent in adapting the work environment accordingly. In order to approach a more universal design of the work environment, industrial designers need support from user-sensitive inclusive design studies. While there are plenty of guidelines and tools containing relevant information, there is a need to develop more appropriate tools for Industrial Designers that cover the initial phase of the design process. This study provides a review of the available tools and guidelines and proposes a theoretical framework intended for developing a design guidance tool for inclusive workstation design. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Turbine design review text

NASA Technical Reports Server (NTRS)

1975-01-01

Three-volume publication covers theoretical, design, and performance aspects of turbines. Volumes cover thermodynamic and fluid-dynamic concepts, velocity diagram design, turbine blade aerodynamic design, turbine energy losses, supersonic turbines, radial-inflow turbines, turbine cooling, and aerodynamic performance testing.

Language and Society. Course HP06a: Part Time BA Degree Programme.

ERIC Educational Resources Information Center

Griffith Univ., Brisbane (Australia). School of Humanities.

This course, one of 16 sequential courses comprising phase one of a part-time Bachelor of Arts degree program in Australian Studies, examines a number of theoretical approaches to the study of language, particularly those which place language in a social context. It is designed for independent study combined with tutorial sessions. Chapter 1 is an…

Different Perspectives of Cultural Mediation: Implications for the Research Design on Studies Examining Its Effect on Students' Cognition

ERIC Educational Resources Information Center

Teo, Tang Wee

2013-01-01

In this forum, I extend Tao, Oliver, and Venville's paper "Chinese and Australian children's understanding of the earth: a cross cultural study of conceptual development" to discuss the different views on culture and cultural mediation. I tease out nuances in the viewpoints to suggest three ways to theoretically frame studies examining cultural…

A review of patient-centred post-fracture interventions in the context of theories of health behaviour change.

PubMed

Sujic, R; Gignac, M A; Cockerill, R; Beaton, D E

2011-08-01

The purpose of this literature review is to determine whether and to what extent current post-fracture osteoporosis interventions utilize theories of health behaviour change and whether those that are theory-based are more successful in producing desired behaviour changes. Studies were identified by applying additional criteria to the final selection stage of a systematic review of non-surgical osteoporosis interventions in the orthopaedic environment. We identified 42 primary studies targeted at patients and improving post-fracture osteoporosis care. As well as describing the studies (in terms of design, population, interventions, outcomes), we focused on theoretical framework and elements of behaviour change models. The 42 studies included in this review utilized a variety of post-fracture interventions; however, none of them reported using an underlying theoretical base. Only three studies drew on what we felt to be elements of a theoretical framework. The lack of theoretically based studies points to a currently under-utilized area of behaviour change research that could be applied to post-fracture interventions in order to make them more effective. Despite an abundance of literature supporting theories of behaviour change, post-fracture osteoporosis interventions do not report utilizing these theories. Theories of behaviour change could be applied to post-fracture osteoporosis interventions to explain why patients initiate osteoporosis management. Future research should explore the application of theories of health behaviour change to post-fracture interventions.

"PHE in Action": Development and Modeling of an Intervention to Improve Patient Engagement among Older Adults.

PubMed

Menichetti, Julia; Graffigna, Guendalina

2016-01-01

The increasing prevalence of chronic conditions among older adults constitutes a major public health problem. Thus, changes in lifestyles are required to prevent secondary conditions and sustain good care practices. While patient engagement received great attention in the last years as key strategy to solve this issue, to date no interventions exist to sustain the engagement of older chronic patients toward their health management. This study describes the design, development, and optimization of PHEinAction , a theoretically-driven intervention program to increase patient engagement in older chronic populations and consequently to foster healthy changes that can help reduce risks of health problems. The development process followed the UK Medical Research Council's (MRC) guidelines and involved selecting the theoretical base for the intervention, identifying the relevant evidence-based literature, and conducting exploratory research to qualitatively evaluate program's feasibility, acceptability, and comprehension. The result was a user-endorsed intervention designed to improve older patients' engagement in health management based on the theoretical framework of the Patient Health Engagement (PHE) model. The intervention program, which emerged from this process, consisted of 2 monthly face-to-face 1-h sessions delivered by a trained facilitator and one brief telephonic consultation, and aimed to facilitate a range of changes for patient engagement (e.g., motivation to change, health information seeking and use, emotional adjustment, health behaviors planning). PHEinAction is the first example of a theoretically-based patient engagement intervention designed for older chronic targets. The intervention program is based on psychological theory and evidence; it facilitates emotional, psychological, and behavioral processes to support patient engagement and lifestyle change and maintenance. It provides estimates of the extent to which it could help high-risk groups engage in effective health management and informs future trials.

“PHE in Action”: Development and Modeling of an Intervention to Improve Patient Engagement among Older Adults

PubMed Central

Menichetti, Julia; Graffigna, Guendalina

2016-01-01

The increasing prevalence of chronic conditions among older adults constitutes a major public health problem. Thus, changes in lifestyles are required to prevent secondary conditions and sustain good care practices. While patient engagement received great attention in the last years as key strategy to solve this issue, to date no interventions exist to sustain the engagement of older chronic patients toward their health management. This study describes the design, development, and optimization of PHEinAction, a theoretically-driven intervention program to increase patient engagement in older chronic populations and consequently to foster healthy changes that can help reduce risks of health problems. The development process followed the UK Medical Research Council's (MRC) guidelines and involved selecting the theoretical base for the intervention, identifying the relevant evidence-based literature, and conducting exploratory research to qualitatively evaluate program's feasibility, acceptability, and comprehension. The result was a user-endorsed intervention designed to improve older patients' engagement in health management based on the theoretical framework of the Patient Health Engagement (PHE) model. The intervention program, which emerged from this process, consisted of 2 monthly face-to-face 1-h sessions delivered by a trained facilitator and one brief telephonic consultation, and aimed to facilitate a range of changes for patient engagement (e.g., motivation to change, health information seeking and use, emotional adjustment, health behaviors planning). PHEinAction is the first example of a theoretically-based patient engagement intervention designed for older chronic targets. The intervention program is based on psychological theory and evidence; it facilitates emotional, psychological, and behavioral processes to support patient engagement and lifestyle change and maintenance. It provides estimates of the extent to which it could help high-risk groups engage in effective health management and informs future trials. PMID:27695435

Design of a Phase /Doppler Light-Scattering System for Measurement of Small-Diameter Glass Fibers During Fiberglass Manufacturing

NASA Astrophysics Data System (ADS)

Schaub, Scott A.; Naqwi, Amir A.; Harding, Foster L.

1998-01-01

We present fundamental studies examining the design of a phase /Doppler laser light-scattering system applicable to on-line measurements of small-diameter ( <15 m) fibers during fiberglass manufacturing. We first discuss off-line diameter measurement techniques currently used in the fiberglass industry and outline the limitations and problems associated with these methods. For the phase /Doppler design study we have developed a theoretical computer model for the response of the measurement system to cylindrical fibers, which is based on electromagnetic scattering theory. The model, valid for arbitrary fiber diameters and hardware configurations, generates simulated detector output as a function of time for a finite absorbing, cylindrical fiber oriented perpendicular to the two incident laser beams. Results of experimental measurements are presented, confirming predictions of the theoretical model. Parametric studies have also been conducted using the computer model to identify experimental arrangements that provide linear phase -diameter relationships for small-diameter fibers, within the measurement constraints imposed by the fiberglass production environment. The effect of variations in optical properties of the glass as well as fiber orientation effects are discussed. Through this research we have identified phase /Doppler arrangements that we expect to have future applications in the fiberglass industry for on-line diameter monitoring and process control.

Design of a phase/doppler light-scattering system for measurement of small-diameter glass fibers during fiberglass manufacturing.

PubMed

Schaub, S A; Naqwi, A A; Harding, F L

1998-01-20

We present fundamental studies examining the design of a phase/Doppler laser light-scattering system applicable to on-line measurements of small-diameter (<15 mum) fibers during fiberglass manufacturing. We first discuss off-line diameter measurement techniques currently used in the fiberglass industry and outline the limitations and problems associated with these methods. For the phase/Doppler design study we have developed a theoretical computer model for the response of the measurement system to cylindrical fibers, which is based on electromagnetic scattering theory. The model, valid for arbitrary fiber diameters and hardware configurations, generates simulated detector output as a function of time for a finite absorbing, cylindrical fiber oriented perpendicular to the two incident laser beams. Results of experimental measurements are presented, confirming predictions of the theoretical model. Parametric studies have also been conducted using the computer model to identify experimental arrangements that provide linear phase-diameter relationships for small-diameter fibers, within the measurement constraints imposed by the fiberglass production environment. The effect of variations in optical properties of the glass as well as fiber orientation effects are discussed. Through this research we have identified phase/Doppler arrangements that we expect to have future applications in the fiberglass industry for on-line diameter monitoring and process control.

Two theories/a sharper lens: the staff nurse voice in the workplace.

PubMed

DeMarco, Rosanna

2002-06-01

This paper (1) introduces the two theoretical frameworks, Silencing the Self and the Framework of Systemic Organization (2) describes the design and findings briefly of a study exploring spillover in nurses utilizing the frameworks, and (3) discusses the process and value of theory triangulation when conducting research in the context of complex nursing systems phenomena where gender, professional work, and gender identity merge. A research study was designed to analyse the actual workplace behaviours of nurses in the context of their lives at work and outside work. An exploration of theoretical frameworks that could direct the measurement of the phenomena in question led to the use of two frameworks, the Framework of Systemic Organization (Friedemann 1995) and the Silencing the Self Theory (Jack 1991), and the creation of a valid and reliable summative rating instrument (the Staff Nurse Workplace Behaviours Scale, SNWBS). A descriptive correlational design was used to measure behaviours between work and home. There were statistically significant relationships found between workplace behaviours, family behaviours, and silencing behaviours as measured by the two separate scales measuring framework concepts. Although both theories had different origins and philosophical tenets, the findings of a research study created an opportunity to integrate the concepts of each and unexpectedly increase and broaden the understanding of spillover for women who are often nurses.

A systematic review of the use of theory in randomized controlled trials of audit and feedback

PubMed Central

2013-01-01

Background Audit and feedback is one of the most widely used and promising interventions in implementation research, yet also one of the most variably effective. Understanding this variability has been limited in part by lack of attention to the theoretical and conceptual basis underlying audit and feedback. Examining the extent of theory use in studies of audit and feedback will yield better understanding of the causal pathways of audit and feedback effectiveness and inform efforts to optimize this important intervention. Methods A total of 140 studies in the 2012 Cochrane update on audit and feedback interventions were independently reviewed by two investigators. Variables were extracted related to theory use in the study design, measurement, implementation or interpretation. Theory name, associated reference, and the location of theory use as reported in the study were extracted. Theories were organized by type (e.g., education, diffusion, organization, psychology), and theory utilization was classified into seven categories (justification, intervention design, pilot testing, evaluation, predictions, post hoc, other). Results A total of 20 studies (14%) reported use of theory in any aspect of the study design, measurement, implementation or interpretation. In only 13 studies (9%) was a theory reportedly used to inform development of the intervention. A total of 18 different theories across educational, psychological, organizational and diffusion of innovation perspectives were identified. Rogers’ Diffusion of Innovations and Bandura’s Social Cognitive Theory were the most widely used (3.6% and 3%, respectively). Conclusions The explicit use of theory in studies of audit and feedback was rare. A range of theories was found, but not consistency of theory use. Advancing our understanding of audit and feedback will require more attention to theoretically informed studies and intervention design. PMID:23759034

A systematic review of the use of theory in randomized controlled trials of audit and feedback.

PubMed

Colquhoun, Heather L; Brehaut, Jamie C; Sales, Anne; Ivers, Noah; Grimshaw, Jeremy; Michie, Susan; Carroll, Kelly; Chalifoux, Mathieu; Eva, Kevin W

2013-06-10

Audit and feedback is one of the most widely used and promising interventions in implementation research, yet also one of the most variably effective. Understanding this variability has been limited in part by lack of attention to the theoretical and conceptual basis underlying audit and feedback. Examining the extent of theory use in studies of audit and feedback will yield better understanding of the causal pathways of audit and feedback effectiveness and inform efforts to optimize this important intervention. A total of 140 studies in the 2012 Cochrane update on audit and feedback interventions were independently reviewed by two investigators. Variables were extracted related to theory use in the study design, measurement, implementation or interpretation. Theory name, associated reference, and the location of theory use as reported in the study were extracted. Theories were organized by type (e.g., education, diffusion, organization, psychology), and theory utilization was classified into seven categories (justification, intervention design, pilot testing, evaluation, predictions, post hoc, other). A total of 20 studies (14%) reported use of theory in any aspect of the study design, measurement, implementation or interpretation. In only 13 studies (9%) was a theory reportedly used to inform development of the intervention. A total of 18 different theories across educational, psychological, organizational and diffusion of innovation perspectives were identified. Rogers' Diffusion of Innovations and Bandura's Social Cognitive Theory were the most widely used (3.6% and 3%, respectively). The explicit use of theory in studies of audit and feedback was rare. A range of theories was found, but not consistency of theory use. Advancing our understanding of audit and feedback will require more attention to theoretically informed studies and intervention design.

Aeroacoustics of Flight Vehicles: Theory and Practice. Volume 2: Noise Control

NASA Technical Reports Server (NTRS)

Hubbard, Harvey H. (Editor)

1991-01-01

Flight vehicles and the underlying concepts of noise generation, noise propagation, noise prediction, and noise control are studied. This volume includes those chapters that relate to flight vehicle noise control and operations: human response to aircraft noise; atmospheric propagation; theoretical models for duct acoustic propagation and radiation; design and performance of duct acoustic treatment; jet noise suppression; interior noise; flyover noise measurement and prediction; and quiet aircraft design and operational characteristics.

Theoretical study of network design methodologies for the aerial relay system. [energy consumption and air traffic control

NASA Technical Reports Server (NTRS)

Rivera, J. M.; Simpson, R. W.

1980-01-01

The aerial relay system network design problem is discussed. A generalized branch and bound based algorithm is developed which can consider a variety of optimization criteria, such as minimum passenger travel time and minimum liner and feeder operating costs. The algorithm, although efficient, is basically useful for small size networks, due to its nature of exponentially increasing computation time with the number of variables.

Thinking outside the ROCs: Designing decorrelated taggers (DDT) for jet substructure

DOE PAGES

Dolen, James; Harris, Philip; Marzani, Simone; ...

2016-05-26

Here, we explore the scale-dependence and correlations of jet substructure observables to improve upon existing techniques in the identification of highly Lorentz-boosted objects. Modified observables are designed to remove correlations from existing theoretically well-understood observables, providing practical advantages for experimental measurements and searches for new phenomena. We study such observables in W jet tagging and provide recommendations for observables based on considerations beyond signal and background efficiencies.

A self-study of designing and implementing an inquiry-based chemistry course for elementary education majors

NASA Astrophysics Data System (ADS)

Larson, Teresa

2011-12-01

This self-study examines my experiences with implementing an inquiry-based version of a chemistry course (Chemistry 299) designed for elementary education majors. The inquiry-based curriculum design and teaching strategies that I implement in Chemistry 299 is the focus of this study. Since my previous education and professional experiences were in the physical sciences, I position myself in this study as a scientist who engages in self-study as a form of professional development for the purpose of developing an inquiry-based curriculum and instructional practices. My research provides an inside perspective of the curriculum development process. This process involves implementing the inquiry-oriented ideas and knowledge I acquired in my graduate studies to design the curriculum and influence my teaching practice. My analysis of the curriculum and my instruction is guided by two questions: What are the strengths and weaknesses of the inquiry-based Chemistry 299 curriculum design? What does the process of developing my inquiry-based teaching practice entail and what makes is challenging? Schwab's (1973) The Practical 3: Translation into Curriculum serves as the theoretical framework for this study because of the emphasis Schwab places on combining theoretical and practical knowledge in the curriculum development process and because of the way he characterizes the curriculum. The findings in this study are separated into curriculum and instruction domains. First, the Chemistry 299 curriculum was designed to make the epistemological practices of scientists "accessible" to students by emphasizing epistemic development with respect to their ideas about scientific inquiry and science learning. Using student learning as a gauge for progress, I identify specific design elements that developed transferable inquiry skills as a means to support scientific literacy and pre-service teacher education. Second, the instruction-related findings built upon the insight I gained through my analysis of the curriculum. The data reveals four areas of inner conflict I dealt with throughout the study that related to underlying beliefs I held about science teaching and learning. The implications of the study position the Chemistry 299 curriculum in the field and speak to issues related to developing science courses for elementary education majors and professional development for scientists.

Culture of rural nursing practice: a critical theoretical analysis of determinants of power in nursing.

PubMed

Gibb, Heather; Forsyth, Katreena; Anderson, Judith

This paper investigates the culture of workplace learning within a study of eight small hospitals in rural New South Wales (NSW), Australia. The study used a focus group method of data collection, undertaken before then after a series of interventions designed to nurture a culture that supports learning within the rural health care setting. Student AINs, AINs, ENs and RNs from any of the eight hospitals. Framed within a critical social perspective it applies a theory of culture to understand the determinants of social divisiveness that was occurring between different levels of the nursing workforce. These results are further analysed within a theoretical discussion of culture and power in nursing.

Theoretical Study of the Statistical Properties of Single- and Double-Pass M-Mode Er3+-Ti:LiNbO3 Straight Waveguide Amplifiers

NASA Astrophysics Data System (ADS)

Puscas, Liliana A.; Galatus, Ramona V.; Puscas, Niculae N.

In this article, we report a theoretical study concerning some statistical parameters which characterize the single- and double-pass Er3+-doped Ti:LiNbO3 M-mode straight waveguides. For the derivation and the evaluation of the Fano factor, the statistical fluctuation and the spontaneous emission factor we used a quasi two-level model in the small gain approximation and the unsaturated regime. The simulation results show the evolution of these parameters under various pump regimes and waveguide lengths. The obtained results can be used for the design of complex rare earth-doped integrated circuits.

Drill pipe threaded nipple connection design development

NASA Astrophysics Data System (ADS)

Saruev, A. L.; Saruev, L. A.; Vasenin, S. S.

2015-11-01

The paper presents the analysis of the behavior of the drill pipe nipple connection under the additional load generated by power pulses. The strain wave propagation through the nipple thread connection of drill pipes to the bottomhole is studied in this paper. The improved design of the nipple thread connection is suggested using the obtained experimental and theoretical data. The suggested connection design allows not only the efficient transmission of strain wave energy to a drill bit but also the automation of making-up and breaking-out drill pipes.

Parametric study of closed wet cooling tower thermal performance

NASA Astrophysics Data System (ADS)

Qasim, S. M.; Hayder, M. J.

2017-08-01

The present study involves experimental and theoretical analysis to evaluate the thermal performance of modified Closed Wet Cooling Tower (CWCT). The experimental study includes: design, manufacture and testing prototype of a modified counter flow forced draft CWCT. The modification based on addition packing to the conventional CWCT. A series of experiments was carried out at different operational parameters. In view of energy analysis, the thermal performance parameters of the tower are: cooling range, tower approach, cooling capacity, thermal efficiency, heat and mass transfer coefficients. The theoretical study included develops Artificial Neural Network (ANN) models to predicting various thermal performance parameters of the tower. Utilizing experimental data for training and testing, the models simulated by multi-layer back propagation algorithm for varying all operational parameters stated in experimental test.

Experimental validation of ultra-thin metalenses for N-beam emissions based on transformation optics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Kuang, E-mail: zhangkuang@hit.edu.cn; State Key Laboratory of Millimeter Waves, Nanjing 210096; Ding, Xumin

2016-02-01

A general design of metalenses for N-beam emissions is proposed based on transformation optics. A linear mapping function is adopted to achieve the homogeneous characterization of the transforming medium, which is therefore easy to be achieved compared with previous designs limited by inhomogeneity based on transformation optics. To verify the theoretical design, a four-beam antenna constructed with ultrathin, homogenous, and uniaxial anisotropic metalens is designed, fabricated, and measured. It is shown that the realized gain of the four-beam antenna is increased by 6 dB compared with the single dipole source, while working frequency and relative bandwidth are kept unchanged. The measuredmore » far-field pattern verifies theoretical design procedure.« less

Theoretical description and design of nanomaterial slab waveguides: application to compensation of optical diffraction.

PubMed

Kivijärvi, Ville; Nyman, Markus; Shevchenko, Andriy; Kaivola, Matti

2018-04-02

Planar optical waveguides made of designable spatially dispersive nanomaterials can offer new capabilities for nanophotonic components. As an example, a thin slab waveguide can be designed to compensate for optical diffraction and provide divergence-free propagation for strongly focused optical beams. Optical signals in such waveguides can be transferred in narrow channels formed by the light itself. We introduce here a theoretical method for characterization and design of nanostructured waveguides taking into account their inherent spatial dispersion and anisotropy. Using the method, we design a diffraction-compensating slab waveguide that contains only a single layer of silver nanorods. The waveguide shows low propagation loss and broadband diffraction compensation, potentially allowing transfer of optical information at a THz rate.

Method for Studying Helicopter Longitudinal Maneuver Stability

NASA Technical Reports Server (NTRS)

Amer, Kenneth B

1954-01-01

A theoretical analysis of helicopter maneuver stability is made and the results are compared with experimental results for both a single and a tandem rotor helicopter. Techniques are described for measuring in flight the significant stability derivatives for use with the theory to aid in design studies of means for achieving marginal maneuver stability for a prototype helicopter.

Exploratory Study of the Acceptance of Two Individual Practical Classes with Remote Labs

ERIC Educational Resources Information Center

Tirado-Morueta, Ramón; Sánchez-Herrera, Reyes; Márquez-Sánchez, Marco A.; Mejías-Borrero, Andrés; Andujar-Márquez, José Manuel

2018-01-01

Remote lab experiences are proliferating in higher education, although there are still few studies that manage to build a theoretical framework for educational assessment and design of this technology. In order to explore to what extent the use of facilitators of proximity to the laboratory and the autonomy of the experiment makes remote…

Writing Became a Chore Like the Laundry: The Realities of Using Journals To Encourage a Reflective Approach to Practice.

ERIC Educational Resources Information Center

Lewison, Mitzi

This action research study investigated a model of professional development designed to encourage elementary language arts teachers to adopt a more reflective approach to literacy instruction. The model consisted of monthly negotiated-topic study group sessions, theoretically-based reading, and dialogue journal writing. This paper focuses on the…

Ged® Completers' Perceptions of College Readiness and Social Capital: Linking Adult Literacy to a Greater Quality of Life

ERIC Educational Resources Information Center

Lott, Donalyn; O'Dell, Jade

2014-01-01

This study examined the efficacy of general education development (GED®) acquisition and GED® completers' perceptions of college readiness and social capital using a quantitative methodology. Also, the study used a descriptive, cross-sectional research design framed by the social capital theoretical perspective. The conceptual framework developed…

Information Seeking in Organizational Communication: A Case Study of Applied Theory.

ERIC Educational Resources Information Center

Grunig, James E.

An experimental seminar in corporate communication at the University of Maryland was designed to (1) develop a set of theoretical concepts useful to the organizational communicator who functions as a mediator between management and labor, (2) utilize a practical methodology for these concepts, and (3) conduct a case study in cooperation with an…

Adult Education and the Health Literacy of Hispanic Immigrants in the United States

ERIC Educational Resources Information Center

Soto Mas, Francisco; Jacobson, Holly E.; Olivárez, Arturo

2017-01-01

Discussion on the advantages of integrating health literacy into adult education has primarily been theoretical and conceptual. There is a need for studies that assess the impact of adult education on health literacy. This study implemented a quasi-experimental design to explore whether basic adult instruction may constitute a venue for improving…

School Inspections Still in Dispute--An Exploratory Study of School Principals' Perceptions of School Inspections

ERIC Educational Resources Information Center

Bitan, Kristin; Haep, Anna; Steins, Gisela

2015-01-01

This paper assesses attitudes of principals from one German federal state toward school inspections. The discussion about school inspections and their acceptance can be imbedded into theoretical reflections on the design of and approach to feedback in social psychology. In our study, 50 school principals were interviewed about their attitudes…

News Writing Using Wiki: Impacts on Learning Experience of Student Journalists

ERIC Educational Resources Information Center

Ma, Will W. K.; Yuen, Allan H. K.

2008-01-01

Wiki empowers users in generating, revising, and organizing their own content. In this study, we review literature to gain theoretical support for wikis that impact learning. In a context of student journalists learning news writing, we design a two-phase field study: (1) Phase I--to examine learners' reflections on learning news writing in wiki…

Self-Instructional Module Based on Cognitive Load Theory: A Study on Information Retention among Trainee Teachers

ERIC Educational Resources Information Center

Ong, Chiek Pin; Tasir, Zaidatun

2015-01-01

The aim of the research is to study the information retention among trainee teachers using a self-instructional printed module based on Cognitive Load Theory for learning spreadsheet software. Effective pedagogical considerations integrating the theoretical concepts related to cognitive load are reflected in the design and development of the…

Transdisciplinary Case Studies as a Means of Sustainability Learning: Historical Framework and Theory

ERIC Educational Resources Information Center

Scholz, Roland W.; Lang, Daniel J.; Wiek, Arnim; Walter, Alexander I.; Stauffacher, Michael

2006-01-01

Purpose: This paper aims at presenting the theoretical concepts of the transdisciplinary case study approach (TCS), which is a research and teaching approach developed and elaborated at the Swiss Federal Institute of Technology (ETH), as a means of transition support. Design/methodology/approach: The paper reveals the historical roots of case…

The Affordances of Design-Based Research for Studying Multicultural Literature Instruction: Reflections and Insights from a Teacher-Researcher Collaboration

ERIC Educational Resources Information Center

Thein, Amanda Haertling; Barbas, Patricia; Carnevali, Christine; Fox, Ashleigh; Mahoney, Amanda; Vensel, Scott

2012-01-01

This paper details a teacher-researcher effort to investigate effective instructional practices for teaching multicultural literature through a collaborative, iterative process of inquiry driven by tentative, theoretical principles. The study began with a distillation of recent scholarship on multicultural literature response into a set of…

The Meaning of Working among Professional Employees in Germany, Poland and Russia

ERIC Educational Resources Information Center

Kuchinke, K. Peter; Ardichvili, Alexandre; Borchert, Margret; Rozanski, Andrzej

2009-01-01

Purpose: The purpose of this paper is to report the results of an empirical study of the meaning of working, individual level work outcomes, and job and career satisfaction, among professional level employees in business organizations in Russia, Poland, and Germany. Design/methodology/approach: The theoretical framework for the study was based on…

Predicting General Academic Performance and Identifying the Differential Contribution of Participating Variables Using Artificial Neural Networks

ERIC Educational Resources Information Center

Musso, Mariel F.; Kyndt, Eva; Cascallar, Eduardo C.; Dochy, Filip

2013-01-01

Many studies have explored the contribution of different factors from diverse theoretical perspectives to the explanation of academic performance. These factors have been identified as having important implications not only for the study of learning processes, but also as tools for improving curriculum designs, tutorial systems, and students'…

Relations between Teaching and Research in Physical Geography and Mathematics at Research-Intensive Universities

ERIC Educational Resources Information Center

Madsen, Lene Moller; Winslow, Carl

2009-01-01

We examine the relationship between research and teaching practices as they are enacted by university professors in a research-intensive university. First we propose a theoretical model for the study of this relationship based on Chevallard's anthropological theory. This model is used to design and analyze an interview study with physical…

A Learner Analysis of International Female Doctoral Students' Experiences at an American University

ERIC Educational Resources Information Center

Ogbonaya, Agnes I.

2010-01-01

The purpose of this study was to investigate international female doctoral students' perceptions of the challenges they faced in a foreign university, and their strategies for success. The theoretical framework underlying this study focused on the need for learner analysis to aid the design of effective instruction. The participants in this study…

The Transformation of Creativity in Entrepreneurial Learning in Teacher Education: A Critical Reflection

ERIC Educational Resources Information Center

Ehrlin, Anna; Insulander, Eva; Sandberg, Anette

2016-01-01

The purpose of this study is to examine how students on a teacher education programme interpret entrepreneurial learning. The study was performed in Sweden, based on a design theoretical and multimodal perspective on learning and communication which provides the basis for how we understand learning processes in early teacher education. The sample…

Effects of Communities of Reflecting Peers on Student-Teacher Development--Including In-Depth Case Studies

ERIC Educational Resources Information Center

Fund, Zvia

2010-01-01

Despite continuing interest in teacher reflection and an extensive body of research on peer assessment, the interaction between these areas has not been sufficiently investigated. This study on reflection and peer feedback is part of an ongoing action research addressing the design and pedagogical model of a theoretically oriented teacher training…

Project-Based Social Justice Mathematics: A Case Study of Five 6th Grade Students

ERIC Educational Resources Information Center

McHugh, Maighread L.

2015-01-01

The purpose of this qualitative multiple case study was to explore how five sixth grade female students navigated the process of project-based learning as they designed and implemented their own project centered on mathematics while using a social justice lens. The theoretical frameworks of Authentic Intellectual Work and Social Justice…

High Versus Low Theoretical Fidelity Pedometer Intervention Using Social-Cognitive Theory on Steps and Self-Efficacy.

PubMed

Raedeke, Thomas D; Dlugonski, Deirdre

2017-12-01

This study was designed to compare a low versus high theoretical fidelity pedometer intervention applying social-cognitive theory on step counts and self-efficacy. Fifty-six public university employees participated in a 10-week randomized controlled trial with 2 conditions that varied in theoretical fidelity. Participants in the high theoretical fidelity condition wore a pedometer and participated in a weekly group walk followed by a meeting to discuss cognitive-behavioral strategies targeting self-efficacy. Participants in the low theoretical fidelity condition met for a group walk and also used a pedometer as a motivational tool and to monitor steps. Step counts were assessed throughout the 10-week intervention and after a no-treatment follow-up (20 weeks and 30 weeks). Self-efficacy was measured preintervention and postintervention. Participants in the high theoretical fidelity condition increased daily steps by 2,283 from preintervention to postintervention, whereas participants in the low fidelity condition demonstrated minimal change during the same time period (p = .002). Individuals attending at least 80% of the sessions in the high theoretical fidelity condition showed an increase of 3,217 daily steps (d = 1.03), whereas low attenders increased by 925 (d = 0.40). Attendance had minimal impact in the low theoretical fidelity condition. Follow-up data revealed that step counts were at least somewhat maintained. For self-efficacy, participants in the high, compared with those in the low, theoretical fidelity condition showed greater improvements. Findings highlight the importance of basing activity promotion efforts on theory. The high theoretical fidelity intervention that included cognitive-behavioral strategies targeting self-efficacy was more effective than the low theoretical fidelity intervention, especially for those with high attendance.

Theoretical and experimental investigation on the sudden unbalance and rub-impact in rotor system caused by blade off

NASA Astrophysics Data System (ADS)

Wang, Cun; Zhang, Dayi; Ma, Yanhong; Liang, Zhichao; Hong, Jie

2016-08-01

Blade loss from a running turbofan rotor will introduce sudden unbalance into the dynamical system, and as a consequence leads to the rub-impact, the asymmetry of rotor and a series of interesting dynamic characteristics. The paper focuses on the theoretical study on the sudden unbalance and rub-impact caused by blade loss, in particular investigates the response of the rotor on a rotor test rig with sudden unbalance and rub-impact device designed respectively. The results reveal that the sudden unbalance will induce impact effect on the rotor, and critical speed frequency is excited in frequency spectrum. Meantime, the impact effect is more obvious for the rotor operating above critical speed. The influence of rub-impact is considered as additional constraint to the rotor, analyzed by the theory of time-varying system for the first time, and the results are evaluated by experimental tests. The study shows that great attention should be paid to the dynamical design for the overhung rotor system, additional constraint and corresponding analysis method in rub-impact need to be intensively studied.

Communication training for aircrews: A review of theoretical and pragmatic aspects of training program design

NASA Technical Reports Server (NTRS)

Linde, Charlotte; Goguen, Joseph; Devenish, Linda

1987-01-01

This study is the final report of a project studying methods of communications training applicable to both civilian and military aviation personnel, including multiperson teams or single pilot fixed wing or rotary wing aircraft. A review is provided of a number of theories proposed as relevant for producing training materials for improved communications. Criteria are given for evaluating the applicability of training programs to the aviation environment, and these criteria are applied to United Airlines' Resources Management Training, as well as to a number of commercially available general purpose training programs. The report considers in detail assertiveness training and grid management training, examining their theoretical background and attempts made to validate their effectiveness. It was found that there are substantive difficulties in assessing the effectiveness of both training programs, as well as problems with the theories underlying them. However, because the aviation environment offers unique advantages for studying the effectiveness of communications training, recommendations are made on the design of appropriate training programs and on procedures that might be used to validate them.

Combined experimental and theoretical studies on selective sensing of zinc and pyrophosphate ions by rational design of compartmental chemosensor probe: Dual sensing behaviour via secondary recognition approach and cell imaging studies.

PubMed

Mawai, Kiran; Nathani, Sandip; Roy, Partha; Singh, U P; Ghosh, Kaushik

2018-05-08

A compartmental chemosensor probe HL has been designed and synthesized for the selective recognition of zinc ions over other transition metal ions via fluorescence "ON" strategy. The chemosensing behaviour of HL was demonstrated through fluorescence, absorption and NMR spectroscopic techniques. The molecular structure of the zinc complex derived from HL was determined by X-ray crystallography. A probable mechanism of this selective sensing behavior was described on the basis of spectroscopic results and theoretical studies by density functional theory (DFT). The biological applicability of the chemosensor HL was examined via cell imaging on HeLa cells. The HL-zinc complex served as a secondary fluorescent probe responding to the pyrophosphate anion specifically over other anions. The fluorescence enhancement of HL in association with Zn2+ ions was quenched in the presence of pyrophosphate (PPi). Thus, a dual response was established based on "OFF-ON-OFF" strategy for detection of both cation and anion. This phenomenon was utilized in the construction of a "INHIBIT" logic gate.

Practical research on the teaching of Optical Design

NASA Astrophysics Data System (ADS)

Fan, Changjiang; Ren, Zhijun; Ying, Chaofu; Peng, Baojin

2017-08-01

Optical design, together with applied optics, forms a complete system from basic theory to application theory, and it plays a very important role in professional education. In order to improve senior undergraduates' understanding of optical design, this course is divided into three parts: theoretical knowledge, software design and product processing. Through learning theoretical knowledge, students can master the aberration theory and the design principles of typical optical system. By using ZEMAX(an imaging design software), TRACEPRO(a lighting optical design software), SOLIDWORKS or PROE( mechanical design software), student can establish a complete model of optical system. Student can use carving machine located in lab or cooperative units to process the model. Through the above three parts, student can learn necessary practical knowledge and get improved in their learning and analysis abilities, thus they can also get enough practice to prompt their creative abilities, then they could gradually change from scientific theory learners to an Optics Engineers.

Explicit and implicit assessment of gender roles.

PubMed

Fernández, Juan; Quiroga, M Ángeles; Escorial, Sergio; Privado, Jesús

2014-05-01

Gender roles have been assessed by explicit measures and, recently, by implicit measures. In the former case, the theoretical assumptions have been questioned by empirical results. To solve this contradiction, we carried out two concatenated studies based on a relatively well-founded theoretical and empirical approach. The first study was designed to obtain a sample of genderized activities of the domestic sphere by means of an explicit assessment. Forty-two raters (22 women and 20 men, balanced on age, sex, and level of education) took part as raters. In the second study, an implicit assessment of gender roles was carried out, focusing on the response time given to the sample activities obtained from the first study. A total of 164 adults (90 women and 74 men, mean age = 43), with experience in living with a partner and balanced on age, sex, and level of education, participated. Taken together, results show that explicit and implicit assessment converge. The current social reality shows that there is still no equity in some gender roles in the domestic sphere. These consistent results show considerable theoretical and empirical robustness, due to the double implicit and explicit assessment.

Real-time flutter analysis

NASA Technical Reports Server (NTRS)

Walker, R.; Gupta, N.

1984-01-01

The important algorithm issues necessary to achieve a real time flutter monitoring system; namely, the guidelines for choosing appropriate model forms, reduction of the parameter convergence transient, handling multiple modes, the effect of over parameterization, and estimate accuracy predictions, both online and for experiment design are addressed. An approach for efficiently computing continuous-time flutter parameter Cramer-Rao estimate error bounds were developed. This enables a convincing comparison of theoretical and simulation results, as well as offline studies in preparation for a flight test. Theoretical predictions, simulation and flight test results from the NASA Drones for Aerodynamic and Structural Test (DAST) Program are compared.

A preliminary design study for a cosmic X-ray spectrometer

NASA Technical Reports Server (NTRS)

1972-01-01

The results are described of theoretical and experimental investigations aimed at the development of a curved crystal cosmic X-ray spectrometer to be used at the focal plane of the large orbiting X-ray telescope on the third High Energy Astronomical Observatory. The effort was concentrated on the development of spectrometer concepts and their evaluation by theoretical analysis, computer simulation, and laboratory testing with breadboard arrangements of crystals and detectors. In addition, a computer-controlled facility for precision testing and evaluation of crystals in air and vacuum was constructed. A summary of research objectives and results is included.

Evidence-based ergonomics. A comparison of Japanese and American office layouts.

PubMed

Noro, Kageyu; Fujimaki, Goroh; Kishi, Shinsuke

2003-01-01

There is a variety of alternatives in office layouts. Yet the theoretical basis and criteria for predicting how well these layouts accommodate employees are poorly understood. The objective of this study was to evaluate criteria for selecting office layouts. Intensive computer workers worked in simulated office layouts in a controlled experimental laboratory. Eye movement measures indicate that knowledge work requires both concentration and interaction. Findings pointed to one layout as providing optimum balance between these 2 requirements. Recommendations for establishing a theoretical basis and design criteria for selecting office layouts based on work style are suggested.

Application Of Numerical Modelling To Ribbed Wire Rod Dimensions Precision Increase

NASA Astrophysics Data System (ADS)

Szota, Piotr; Mróz, Sebastian; Stefanik, Andrzej

2007-05-01

The paper presents the results of theoretical and experimental investigations of the process of rolling square ribbed wire rod designed for concrete reinforcement. Numerical modelling of the process of rolling in the finishing and pre-finishing grooves was carried out using the Forge2005® software. In the investigation, particular consideration was given to the analysis of the effect of pre-finished band shape on the formation of ribs on the finished wire rod in the finishing groove. The results of theoretical studies were verified in experimental tests, which were carried out in a wire rolling mill.

A Longitudinal Study of Individual and Organisational Learning

ERIC Educational Resources Information Center

Campbell, Timothy T.; Armstrong, Steven J.

2013-01-01

Purpose: The purpose of this paper is to empirically examine organisational learning (OL) and individual managerial learning and provide a comparative evaluation of the ability of each to generate organisational benefits. Design/methodology/approach: A theoretical model of organisational learning is developed which was then longitudinally tested…

Developmental Education: The Recognition of Individual Differences

ERIC Educational Resources Information Center

Blimline, Carol; Klimek, Richard

1977-01-01

This article describes the historical, empirical, and theoretical aspects of a series of one-credit student development courses offered at a multicampus community college. The courses, ranging from "The Emerging Woman" to "Study Skills," were specifically designed to meet a variety of developmental needs for a diverse student…

Lean for Education

ERIC Educational Resources Information Center

LeMahieu, Paul G.; Nordstrum, Lee E.; Greco, Patricia

2017-01-01

Purpose: This paper is one of seven in this volume that aims to elaborate different approaches to quality improvement in education. It delineates a methodology called Lean for Education. Design/methodology/approach: The paper presents the origins, theoretical foundations, core concepts and a case study demonstrating an application in US education,…

Motivational Profiles and Their Associations with Achievement Outcomes

ERIC Educational Resources Information Center

Shen, Bo; McCaughtry, Nate; Martin, Jeffrey J.; Fahlman, Mariane M.

2009-01-01

With the belief that theoretical integration in motivation may help us better understand motivational behavior, we designed this study to explore adolescents' motivational profiles and their associations with knowledge acquisition, leisure-time exercise behaviors, and cardiorespiratory fitness. Middle school students from a large urban inner-city…

Influence: A Key to Successful Leadership

ERIC Educational Resources Information Center

Hoy, Wayne K.; Smith, Page A.

2007-01-01

Purpose: The purpose of this article is to examine and condense the literature on influence and persuasion. Design/methodology/approach: The article identifies basic principles of influence in the theoretical and research literature, which are supported by empirical study. Findings: Ten principles of influence were identified, empirical support…

"Grey" Areas and "Organized Chaos" in Emergency Response

ERIC Educational Resources Information Center

Taber, Nancy; Plumb, Donovan; Jolemore, Shawn

2008-01-01

Purpose: The purpose of this research is to explore the interaction between organizational policies and daily work practices of paramedics and firefighters within two emergency response organizations. Design/methodology/approach: Data were collected in a case study consisting of interviews, focus groups, and observations. The theoretical grounding…

Teacher Candidate Technology Integration: For Student Learning or Instruction?

ERIC Educational Resources Information Center

Clark, Cynthia; Zhang, Shaoan; Strudler, Neal

2015-01-01

Transfer of instructional technology knowledge for student-centered learning by teacher candidates is investigated in this study. Using the transfer of learning theoretical framework, a mixed methods research design was employed to investigate whether secondary teacher candidates were able to transfer the instructional technology knowledge for…

Modeling Learning Processes in Lexical CALL.

ERIC Educational Resources Information Center

Goodfellow, Robin; Laurillard, Diana

1994-01-01

Studies the performance of a novice Spanish student using a Computer-assisted language learning (CALL) system designed for vocabulary enlargement. Results indicate that introspective evidence may be used to validate performance data within a theoretical framework that characterizes the learning approach as "surface" or "deep." (25 references)…

Persuasion: Attitude/Behavior Change. A Selected, Annotated Bibliography.

ERIC Educational Resources Information Center

Benoit, William L.

Designed for teachers, students and researchers of the psychological dimensions of attitude and behavior change, this annotated bibliography lists books, bibliographies and articles on the subject ranging from general introductions and surveys through specific research studies, and from theoretical position essays to literature reviews. The 42…

Uncertainties in Engineering Design. Mathematical Theory and Numerical Experience.

DTIC Science & Technology

1985-08-01

Theoretical Mannual, Noetic Technologies Corpora- tion, St. Louis, Missouri, 1985. F :.5,. "V. .. " ,9.., 25 . - 5* 5 .° . . . . .. ,koA ’FIGURES...international center of study and research for foreign students in numerical mathematics who are supported by foreign govern- ments or exchange agencies

When practice precedes theory - A mixed methods evaluation of students' learning experiences in an undergraduate study program in nursing.

PubMed

Falk, Kristin; Falk, Hanna; Jakobsson Ung, Eva

2016-01-01

A key area for consideration is determining how optimal conditions for learning can be created. Higher education in nursing aims to prepare students to develop their capabilities to become independent professionals. The aim of this study was to evaluate the effects of sequencing clinical practice prior to theoretical studies on student's experiences of self-directed learning readiness and students' approach to learning in the second year of a three-year undergraduate study program in nursing. 123 nursing students was included in the study and divided in two groups. In group A (n = 60) clinical practice preceded theoretical studies. In group (n = 63) theoretical studies preceded clinical practice. Learning readiness was measured using the Directed Learning Readiness Scale for Nursing Education (SDLRSNE), and learning process was measured using the revised two-factor version of the Study Process Questionnaire (R-SPQ-2F). Students were also asked to write down their personal reflections throughout the course. By using a mixed method design, the qualitative component focused on the students' personal experiences in relation to the sequencing of theoretical studies and clinical practice. The quantitative component provided information about learning readiness before and after the intervention. Our findings confirm that students are sensitive and adaptable to their learning contexts, and that the sequencing of courses is subordinate to a pedagogical style enhancing students' deep learning approaches, which needs to be incorporated in the development of undergraduate nursing programs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Aerodynamic design and analysis system for supersonic aircraft. Part 1: General description and theoretical development

NASA Technical Reports Server (NTRS)

Middleton, W. D.; Lundry, J. L.

1975-01-01

An integrated system of computer programs has been developed for the design and analysis of supersonic configurations. The system uses linearized theory methods for the calculation of surface pressures and supersonic area rule concepts in combination with linearized theory for calculation of aerodynamic force coefficients. Interactive graphics are optional at the user's request. This part presents a general description of the system and describes the theoretical methods used.

Study and Development of an Air Conditioning System Operating on a Magnetic Heat Pump Cycle

NASA Technical Reports Server (NTRS)

Wang, Pao-Lien

1991-01-01

This report describes the design of a laboratory scale demonstration prototype of an air conditioning system operating on a magnetic heat pump cycle. Design parameters were selected through studies performed by a Kennedy Space Center (KSC) System Simulation Computer Model. The heat pump consists of a rotor turning through four magnetic fields that are created by permanent magnets. Gadolinium was selected as the working material for this demonstration prototype. The rotor was designed to be constructed of flat parallel disks of gadolinium with very little space in between. The rotor rotates in an aluminum housing. The laboratory scale demonstration prototype is designed to provide a theoretical Carnot Cycle efficiency of 62 percent and a Coefficient of Performance of 16.55.

Work-Centered Technology Development (WTD)

DTIC Science & Technology

2005-03-01

theoretical, testable, inductive, and repeatable foundations of science. o Theoretical foundations include notions such as statistical versus analytical...Human Factors and Ergonomics Society, 263-267. 179 Eggleston, R. G. (2005). Coursebook : Work-Centered Design (WCD). AFRL/HECS WCD course training

Leaving No Stone Unturned in the Pursuit of New Physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cohen, Timothy

The major goal of this project was to investigate a variety of topics in theoretical particle physics, with an emphasis on beyond the Standard Model phenomena. A particular emphasis is placed on making a connection to ongoing experimental efforts designed to extend our knowledge of the fundamental physics frontiers. The principal investigator aimed to play a leading role in theoretical research that complements this impressive experimental endeavor. Progress requires a strong synergy between the theoretical and experimental communities to design and interpret the data that is produced. Thus, this project's main goal was to improve our understanding of models, signatures,more » and techniques as we continue the hunt for new physics.« less

Comparison of information theoretic divergences for sensor management

NASA Astrophysics Data System (ADS)

Yang, Chun; Kadar, Ivan; Blasch, Erik; Bakich, Michael

2011-06-01

In this paper, we compare the information-theoretic metrics of the Kullback-Leibler (K-L) and Renyi (α) divergence formulations for sensor management. Information-theoretic metrics have been well suited for sensor management as they afford comparisons between distributions resulting from different types of sensors under different actions. The difference in distributions can also be measured as entropy formulations to discern the communication channel capacity (i.e., Shannon limit). In this paper, we formulate a sensor management scenario for target tracking and compare various metrics for performance evaluation as a function of the design parameter (α) so as to determine which measures might be appropriate for sensor management given the dynamics of the scenario and design parameter.

In-Silico Design, Synthesis and Evaluation of a Nanostructured Hydrogel as a Dimethoate Removal Agent.

PubMed

Avila-Salas, Fabian; Marican, Adolfo; Villaseñor, Jorge; Arenas-Salinas, Mauricio; Argandoña, Yerko; Caballero, Julio; Durán-Lara, Esteban F

2018-01-04

This study describes the in-silico design, synthesis, and evaluation of a cross-linked PVA hydrogel (CLPH) for the absorption of organophosphorus pesticide dimethoate from aqueous solutions. The crosslinking effectiveness of 14 dicarboxilic acids was evaluated through in-silico studies using semiempirical quantum mechanical calculations. According to the theoretical studies, the nanopore of PVA cross-linked with malic acid (CLPH-MA) showed the best interaction energy with dimethoate. Later, using all-atom molecular dynamics simulations, three hydrogels with different proportions of PVA:MA (10:2, 10:4, and 10:6) were used to evaluate their interactions with dimethoate. These results showed that the suitable crosslinking degree for improving the affinity for the pesticide was with 20% ( W %) of the cross-linker. In the experimental absorption study, the synthesized CLPH-MA20 recovered 100% of dimethoate from aqueous solutions. Therefore, the theoretical data were correlated with the experimental studies. Surface morphology of CLPH-MA20 by Scanning Electron Microscopy (SEM) was analyzed. In conclusion, the ability of CLPH-MA20 to remove dimethoate could be used as a technological alternative for the treatment of contaminated water.

In-Silico Design, Synthesis and Evaluation of a Nanostructured Hydrogel as a Dimethoate Removal Agent

PubMed Central

Avila-Salas, Fabian; Marican, Adolfo; Villaseñor, Jorge; Argandoña, Yerko

2018-01-01

This study describes the in-silico design, synthesis, and evaluation of a cross-linked PVA hydrogel (CLPH) for the absorption of organophosphorus pesticide dimethoate from aqueous solutions. The crosslinking effectiveness of 14 dicarboxilic acids was evaluated through in-silico studies using semiempirical quantum mechanical calculations. According to the theoretical studies, the nanopore of PVA cross-linked with malic acid (CLPH-MA) showed the best interaction energy with dimethoate. Later, using all-atom molecular dynamics simulations, three hydrogels with different proportions of PVA:MA (10:2, 10:4, and 10:6) were used to evaluate their interactions with dimethoate. These results showed that the suitable crosslinking degree for improving the affinity for the pesticide was with 20% (W%) of the cross-linker. In the experimental absorption study, the synthesized CLPH-MA20 recovered 100% of dimethoate from aqueous solutions. Therefore, the theoretical data were correlated with the experimental studies. Surface morphology of CLPH-MA20 by Scanning Electron Microscopy (SEM) was analyzed. In conclusion, the ability of CLPH-MA20 to remove dimethoate could be used as a technological alternative for the treatment of contaminated water. PMID:29300312

Trading Later Rewards for Current Pleasure: Pornography Consumption and Delay Discounting.

PubMed

Negash, Sesen; Sheppard, Nicole Van Ness; Lambert, Nathaniel M; Fincham, Frank D

2016-01-01

Internet pornography is a multi-billion-dollar industry that has grown increasingly accessible. Delay discounting involves devaluing larger, later rewards in favor of smaller, more immediate rewards. The constant novelty and primacy of sexual stimuli as particularly strong natural rewards make Internet pornography a unique activator of the brain's reward system, thereby having implications for decision-making processes. Based on theoretical studies of evolutionary psychology and neuroeconomics, two studies tested the hypothesis that consuming Internet pornography would relate to higher rates of delay discounting. Study 1 used a longitudinal design. Participants completed a pornography use questionnaire and a delay discounting task at Time 1 and then again four weeks later. Participants reporting higher initial pornography use demonstrated a higher delay discounting rate at Time 2, controlling for initial delay discounting. Study 2 tested for causality with an experimental design. Participants were randomly assigned to abstain from either their favorite food or pornography for three weeks. Participants who abstained from pornography use demonstrated lower delay discounting than participants who abstained from their favorite food. The finding suggests that Internet pornography is a sexual reward that contributes to delay discounting differently than other natural rewards. Theoretical and clinical implications of these studies are highlighted.

Designing for students' science learning using argumentation and classroom debate

NASA Astrophysics Data System (ADS)

Bell, Philip Laverne

1998-12-01

This research investigates how to design and introduce an educational innovation into a classroom setting to support learning. The research yields cognitive design principles for instruction involving scientific argumentation and debate. Specifically, eighth-grade students used a computer learning environment to construct scientific arguments and to participate in a classroom debate. The instruction was designed to help students integrate their science understanding by debating: How far does light go, does light die out over distance or go forever until absorbed? This research explores the tension between focusing students' conceptual change on specific scientific phenomena and their development of integrated understanding. I focus on the importance of connecting students' everyday experiences and intuitions to their science learning. The work reported here characterizes how students see the world through a filter of their own understanding. It explores how individual and social mechanisms in instruction support students as they expand the range of ideas under consideration and distinguish between these ideas using scientific criteria. Instruction supported students as they engaged in argumentation and debate on a set of multimedia evidence items from the World-Wide-Web. An argument editor called SenseMaker was designed and studied with the intent of making individual and group thinking visible during instruction. Over multiple classroom trials, different student cohorts were increasingly supported in scientific argumentation involving systematic coordination of evidence with theoretical ideas about light. Students' knowledge representations were used as mediating "learning artifacts" during classroom debate. Two argumentation conditions were investigated. The Full Scope group prepared to defend either theoretical position in the debate. These students created arguments that included more theoretical conjectures and made more conceptual progress in understanding light. The Personal Scope group prepared to defend their original opinion about the debate. These students produced more acausal descriptions of evidence and theorized less in their arguments. Regardless of students' prior knowledge of light, the Full Scope condition resulted in a more integrated understanding. Results from the research were synthesized in design principles geared towards helping future designers. Sharing and refining cognitive design principles offers a productive focus for developing a design science for education.

Exploring Occupational and Behavioral Risk Factors for Obesity in Firefighters: A Theoretical Framework and Study Design

PubMed Central

Schnall, Peter; Dobson, Marnie; Israel, Leslie; Landsbergis, Paul; Galassetti, Pietro; Pontello, Andria; Kojaku, Stacey; Baker, Dean

2011-01-01

Firefighters and police officers have the third highest prevalence of obesity among 41 male occupational groups in the United States (US). However, few studies have examined the relationship of firefighter working conditions and health behaviors with obesity. This paper presents a theoretical framework describing the relationship between working conditions, health behaviors, and obesity in firefighters. In addition, the paper describes a detailed study plan for exploring the role of occupational and behavioral risk factors in the development of obesity in firefighters enrolled in the Orange County Fire Authority Wellness Fitness Program. The study plan will be described with emphasis on its methodological merits: adopting a participatory action research approach, developing a firefighter-specific work and health questionnaire, conducting both a cross-sectional epidemiological study using the questionnaire and a sub-study to assess the validity of the questionnaire with dietary intake and physical activity measures, and evaluating the strengths and weaknesses of the body mass index as an obesity measure in comparison to skinfold-based percent body fat. The study plan based on a theoretical framework can be an essential first step for establishing effective intervention programs for obesity among professional and voluntary firefighters. PMID:22953214

Exploring occupational and behavioral risk factors for obesity in firefighters: a theoretical framework and study design.

PubMed

Choi, Bongkyoo; Schnall, Peter; Dobson, Marnie; Israel, Leslie; Landsbergis, Paul; Galassetti, Pietro; Pontello, Andria; Kojaku, Stacey; Baker, Dean

2011-12-01

Firefighters and police officers have the third highest prevalence of obesity among 41 male occupational groups in the United States (US). However, few studies have examined the relationship of firefighter working conditions and health behaviors with obesity. This paper presents a theoretical framework describing the relationship between working conditions, health behaviors, and obesity in firefighters. In addition, the paper describes a detailed study plan for exploring the role of occupational and behavioral risk factors in the development of obesity in firefighters enrolled in the Orange County Fire Authority Wellness Fitness Program. The study plan will be described with emphasis on its methodological merits: adopting a participatory action research approach, developing a firefighter-specific work and health questionnaire, conducting both a cross-sectional epidemiological study using the questionnaire and a sub-study to assess the validity of the questionnaire with dietary intake and physical activity measures, and evaluating the strengths and weaknesses of the body mass index as an obesity measure in comparison to skinfold-based percent body fat. The study plan based on a theoretical framework can be an essential first step for establishing effective intervention programs for obesity among professional and voluntary firefighters.

Multi-Criteria Approach in Multifunctional Building Design Process

NASA Astrophysics Data System (ADS)

Gerigk, Mateusz

2017-10-01

The paper presents new approach in multifunctional building design process. Publication defines problems related to the design of complex multifunctional buildings. Currently, contemporary urban areas are characterized by very intensive use of space. Today, buildings are being built bigger and contain more diverse functions to meet the needs of a large number of users in one capacity. The trends show the need for recognition of design objects in an organized structure, which must meet current design criteria. The design process in terms of the complex system is a theoretical model, which is the basis for optimization solutions for the entire life cycle of the building. From the concept phase through exploitation phase to disposal phase multipurpose spaces should guarantee aesthetics, functionality, system efficiency, system safety and environmental protection in the best possible way. The result of the analysis of the design process is presented as a theoretical model of the multifunctional structure. Recognition of multi-criteria model in the form of Cartesian product allows to create a holistic representation of the designed building in the form of a graph model. The proposed network is the theoretical base that can be used in the design process of complex engineering systems. The systematic multi-criteria approach makes possible to maintain control over the entire design process and to provide the best possible performance. With respect to current design requirements, there are no established design rules for multifunctional buildings in relation to their operating phase. Enrichment of the basic criteria with functional flexibility criterion makes it possible to extend the exploitation phase which brings advantages on many levels.

Theoretical Study on Free Fatty Acid Elimination Mechanism for Waste Cooking Oils to Biodiesel over Acid Catalyst.

PubMed

Wang, Kai; Zhang, Xiaochao; Zhang, Jilong; Zhang, Zhiqiang; Fan, Caimei; Han, Peide

2016-05-01

A theoretical investigation on the esterification mechanism of free fatty acid (FFA) in waste cooking oils (WCOs) has been carried out using DMol(3) module based on the density functional theory (DFT). Three potential pathways of FFA esterification reaction are designed to achieve the formation of fatty acid methyl ester (FAME), and calculated results show that the energy barrier can be efficiently reduced from 88.597kcal/mol to 15.318kcal/mol by acid catalyst. The molar enthalpy changes (ΔrHm°) of designed pathways are negative, indicating that FFA esterification reaction is an exothermic process. The obtained favorable energy pathway is: H(+) firstly activates FFA, then the intermediate combines with methanol to form a tetrahedral structure, and finally, producing FAME after removing a water molecule. The rate-determining step is the combination of the activated FFA with methanol, and the activation energy is about 11.513kcal/mol at 298.15K. Our results should provide basic and reliable theoretical data for further understanding the elimination mechanism of FFA over acid catalyst in the conversion of WCOs to biodiesel products. Copyright © 2016 Elsevier Inc. All rights reserved.

A unified approach for determining the ultimate strength of RC members subjected to combined axial force, bending, shear and torsion

PubMed Central

Huang, Zhen

2017-01-01

This paper uses experimental investigation and theoretical derivation to study the unified failure mechanism and ultimate capacity model of reinforced concrete (RC) members under combined axial, bending, shear and torsion loading. Fifteen RC members are tested under different combinations of compressive axial force, bending, shear and torsion using experimental equipment designed by the authors. The failure mechanism and ultimate strength data for the four groups of tested RC members under different combined loading conditions are investigated and discussed in detail. The experimental research seeks to determine how the ultimate strength of RC members changes with changing combined loads. According to the experimental research, a unified theoretical model is established by determining the shape of the warped failure surface, assuming an appropriate stress distribution on the failure surface, and considering the equilibrium conditions. This unified failure model can be reasonably and systematically changed into well-known failure theories of concrete members under single or combined loading. The unified calculation model could be easily used in design applications with some assumptions and simplifications. Finally, the accuracy of this theoretical unified model is verified by comparisons with experimental results. PMID:28414777

Computational Insights into Materials and Interfaces for Capacitive Energy Storage

PubMed Central

Zhan, Cheng; Lian, Cheng; Zhang, Yu; Thompson, Matthew W.; Xie, Yu; Wu, Jianzhong; Kent, Paul R. C.; Cummings, Peter T.; Wesolowski, David J.

2017-01-01

Supercapacitors such as electric double‐layer capacitors (EDLCs) and pseudocapacitors are becoming increasingly important in the field of electrical energy storage. Theoretical study of energy storage in EDLCs focuses on solving for the electric double‐layer structure in different electrode geometries and electrolyte components, which can be achieved by molecular simulations such as classical molecular dynamics (MD), classical density functional theory (classical DFT), and Monte‐Carlo (MC) methods. In recent years, combining first‐principles and classical simulations to investigate the carbon‐based EDLCs has shed light on the importance of quantum capacitance in graphene‐like 2D systems. More recently, the development of joint density functional theory (JDFT) enables self‐consistent electronic‐structure calculation for an electrode being solvated by an electrolyte. In contrast with the large amount of theoretical and computational effort on EDLCs, theoretical understanding of pseudocapacitance is very limited. In this review, we first introduce popular modeling methods and then focus on several important aspects of EDLCs including nanoconfinement, quantum capacitance, dielectric screening, and novel 2D electrode design; we also briefly touch upon pseudocapactive mechanism in RuO2. We summarize and conclude with an outlook for the future of materials simulation and design for capacitive energy storage. PMID:28725531

Decoupling Coupled Constraints Through Utility Design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, N; Marden, JR

2014-08-01

Several multiagent systems exemplify the need for establishing distributed control laws that ensure the resulting agents' collective behavior satisfies a given coupled constraint. This technical note focuses on the design of such control laws through a game-theoretic framework. In particular, this technical note provides two systematic methodologies for the design of local agent objective functions that guarantee all resulting Nash equilibria optimize the system level objective while also satisfying a given coupled constraint. Furthermore, the designed local agent objective functions fit into the framework of state based potential games. Consequently, one can appeal to existing results in game-theoretic learning tomore » derive a distributed process that guarantees the agents will reach such an equilibrium.« less

Design, fabrication, and measurement of reflective metasurface for orbital angular momentum vortex wave in radio frequency domain

NASA Astrophysics Data System (ADS)

Yu, Shixing; Li, Long; Shi, Guangming; Zhu, Cheng; Zhou, Xiaoxiao; Shi, Yan

2016-03-01

In this paper, a reflective metasurface is designed, fabricated, and experimentally demonstrated to generate an orbital angular momentum (OAM) vortex wave in radio frequency domain. Theoretical formula of phase-shift distribution is deduced and used to design the metasurface producing vortex radio waves. The prototype of a practical configuration is designed, fabricated, and measured to validate the theoretical analysis at 5.8 GHz. The simulated and experimental results verify that the vortex waves with different OAM mode numbers can be flexibly generated by using sub-wavelength reflective metasurfaces. The proposed method and metasurface pave a way to generate the OAM vortex waves for radio and microwave wireless communication applications.

Parameters Design of Series Resonant Inverter Circuit

NASA Astrophysics Data System (ADS)

Qi, Xingkun; Peng, Yonglong; Li, Yabin

This paper analyzes the main circuit structure of series resonant inverter, and designs the components parameters of the main circuit.That provides a theoretical method for the design of series resonant inverter.

How time delay and network design shape response patterns in biochemical negative feedback systems.

PubMed

Börsch, Anastasiya; Schaber, Jörg

2016-08-24

Negative feedback in combination with time delay can bring about both sustained oscillations and adaptive behaviour in cellular networks. Here, we study which design features of systems with delayed negative feedback shape characteristic response patterns with special emphasis on the role of time delay. To this end, we analyse generic two-dimensional delay differential equations describing the dynamics of biochemical signal-response networks. We investigate the influence of several design features on the stability of the model equilibrium, i.e., presence of auto-inhibition and/or mass conservation and the kind and/or strength of the delayed negative feedback. We show that auto-inhibition and mass conservation have a stabilizing effect, whereas increasing abruptness and decreasing feedback threshold have a de-stabilizing effect on the model equilibrium. Moreover, applying our theoretical analysis to the mammalian p53 system we show that an auto-inhibitory feedback can decouple period and amplitude of an oscillatory response, whereas the delayed feedback can not. Our theoretical framework provides insight into how time delay and design features of biochemical networks act together to elicit specific characteristic response patterns. Such insight is useful for constructing synthetic networks and controlling their behaviour in response to external stimulation.

Games and Diabetes

PubMed Central

Lazem, Shaimaa; Webster, Mary; Holmes, Wayne; Wolf, Motje

2015-01-01

Here we review 18 articles that describe the design and evaluation of 1 or more games for diabetes from technical, methodological, and theoretical perspectives. We undertook searches covering the period 2010 to May 2015 in the ACM, IEEE, Journal of Medical Internet Research, Studies in Health Technology and Informatics, and Google Scholar online databases using the keywords “children,” “computer games,” “diabetes,” “games,” “type 1,” and “type 2” in various Boolean combinations. The review sets out to establish, for future research, an understanding of the current landscape of digital games designed for children with diabetes. We briefly explored the use and impact of well-established learning theories in such games. The most frequently mentioned theoretical frameworks were social cognitive theory and social constructivism. Due to the limitations of the reported evaluation methodologies, little evidence was found to support the strong promise of games for diabetes. Furthermore, we could not establish a relation between design features and the game outcomes. We argue that an in-depth discussion about the extent to which learning theories could and should be manifested in the design decisions is required. PMID:26337753

Theoretical and experimental study for the biomimetic recognition of levothyroxine hormone on magnetic molecularly imprinted polymer.

PubMed

Moura, Silio Lima; Fajardo, Laura Martinez; Cunha, Leonardo Dos Anjos; Sotomayor, Maria Del Pilar Taboada; Machado, Francisco Bolivar Correto; Ferrão, Luiz Fernando Araújo; Pividori, Maria Isabel

2018-06-01

This study addresses the rational design of a magnetic molecularly imprinted polymer (magnetic-MIP) for the selective recognition of the hormone levothyroxine. The theoretical study was carried out by the density functional theory (DFT) computations considering dispersion interaction energies, and using the D2 Grimme's correction. The B97-D/def2-SV(P)/PCM method is used not only for studying the structure of the template the and monomer-monomer interactions, but also to assess the stoichiometry, noncovalent binding energies, solvation effects and thermodynamics properties such as binding energy. Among the 13 monomers studied in silico, itaconic acid is the most suitable according to the thermodynamic values. In order to assess the efficiency of the computational study, three different magnetic-MIPs based on itaconic acid, acrylic acid and acrylamide were synthesized and experimentally compared. The theoretical results are in agreement with experimental binding studies based on laser confocal microscopy, magneto-actuated immunoassay and electrochemical sensing. Furthermore, and for the first time, the direct electrochemical sensing of L-thyroxine preconcentrated on magnetic-MIP was successfully performed on magneto-actuated electrodes within 30 min with a limit of detection of as low as 0.0356 ng mL -1 which cover the clinical range of total L-thyroxine. Finally, the main analytical features were compared with the gold standard method based on commercial competitive immunoassays. This work provides a thoughtful strategy for magnetic molecularly imprinted polymer design, synthesis and application, opening new perspectives in the integration of these materials in magneto-actuated approaches for replacing specific antibodies in biosensors and microfluidic devices. Copyright © 2018 Elsevier B.V. All rights reserved.

Integrating theory into disturbance interaction experiments to better inform ecosystem management.

PubMed

Foster, Claire N; Sato, Chloe F; Lindenmayer, David B; Barton, Philip S

2016-04-01

Managing multiple, interacting disturbances is a key challenge to biodiversity conservation, and one that will only increase as global change drivers continue to alter disturbance regimes. Theoretical studies have highlighted the importance of a mechanistic understanding of stressor interactions for improving the prediction and management of interactive effects. However, many conservation studies are not designed or interpreted in the context of theory and instead focus on case-specific management questions. This is a problem as it means that few studies test the relationships highlighted in theoretical models as being important for ecological management. We explore the extent of this problem among studies of interacting disturbances by reviewing recent experimental studies of the interaction between fire and grazing in terrestrial ecosystems. Interactions between fire and grazing can occur via a number of pathways; one disturbance can modify the other's likelihood, intensity or spatial distribution, or one disturbance can alter the other's impacts on individual organisms. The strength of such interactions will vary depending on disturbance attributes (e.g. size or intensity), and this variation is likely to be nonlinear. We show that few experiments testing fire-grazing interactions are able to identify the mechanistic pathway driving an observed interaction, and most are unable to detect nonlinear effects. We demonstrate how these limitations compromise the ability of experimental studies to effectively inform ecological management. We propose a series of adjustments to the design of disturbance interaction experiments that would enable tests of key theoretical pathways and provide the deeper ecological understanding necessary for effective management. Such considerations are relevant to studies of a broad range of ecological interactions and are critical to informing the management of disturbance regimes in the context of accelerating global change. © 2015 John Wiley & Sons Ltd.

A 50-kW Module Power Station of Directly Solar-Pumped Iodine Laser

NASA Technical Reports Server (NTRS)

Choi, S. H.; Lee, J. H.; Meador, W. E.; Conway, E. J.

1997-01-01

The conceptual design of a 50 kW Directly Solar-Pumped Iodine Laser (DSPIL) module was developed for a space-based power station which transmits its coherent-beam power to users such as the moon, Martian rovers, or other satellites with large (greater than 25 kW) electric power requirements. Integration of multiple modules would provide an amount of power that exceeds the power of a single module by combining and directing the coherent beams to the user's receiver. The model developed for the DSPIL system conservatively predicts the laser output power (50 kW) that appears much less than the laser output (93 kW) obtained from the gain volume ratio extrapolation of experimental data. The difference in laser outputs may be attributed to reflector configurations adopted in both design and experiment. Even though the photon absorption by multiple reflections in experimental cavity setup was more efficient, the maximum secondary absorption amounts to be only 24.7 percent of the primary. However, the gain volume ratio shows 86 percent more power output than theoretical estimation that is roughly 60 percent more than the contribution by the secondary absorption. Such a difference indicates that the theoretical model adopted in the study underestimates the overall performance of the DSPIL. This fact may tolerate more flexible and radical selection of design parameters than used in this design study. The design achieves an overall specific power of approximately 5 W/kg and total mass of 10 metric tons.

HELIPLAT: design of high altitude very-long endurance solar powered platform for telecommunication and earth observation

NASA Astrophysics Data System (ADS)

Romeo, Giulio; Frulla, Giacomo

2002-07-01

A research is being carried out at the Turin Polytechnic University aiming at the design of an HAVE/UAV (High Altitude Very-long Endurance/Uninhabited Air Vehicle) and manufacturing of a scale-sized solar-powered prototype. The vehicle should climg to 17-20 km by taking advantage, mainly, of direct sun radiation and maintaining; electric energy not requeired for propulsion and payload operation is pumped back into the fuel cells energy storage system for the night. A computer program has been developed for carrying out a parametric study for the platform design, by taking into account the solar radiation change over one year, the altitude, masses and efficiencies of solar cells and fuel cells, aerodynamic performances, etc. A parametric study shows as fuel cells and solar cells efficiency and mass give the most influence on the platform dimensions. A wide use of high modulus CFRP has been made in designing the structure in order to minimise the airframe weight. The whole mass resulted of 70 kg. The classical hydraulic loading rig was designed for applying the ultimate shear-bending-torsion load to the structure and to verify the theoretical behaviour. A finite element analysis has been carried out by using the MSC/PATRAN/NASTRAN code in order to predict th static and dynamic behaviour. A good correlation has been obtained between the theoretical, numerical and experimental results up to a load corresponding to 5g.

Application of ideal pressure distribution in development process of automobile seats.

PubMed

Kilincsoy, U; Wagner, A; Vink, P; Bubb, H

2016-07-19

In designing a car seat the ideal pressure distribution is important as it is the largest contact surface between the human and the car. Because of obstacles hindering a more general application of the ideal pressure distribution in seating design, multidimensional measuring techniques are necessary with extensive user tests. The objective of this study is to apply and integrate the knowledge about the ideal pressure distribution in the seat design process for a car manufacturer in an efficient way. Ideal pressure distribution was combined with pressure measurement, in this case pressure mats. In order to integrate this theoretical knowledge of seating comfort in the seat development process for a car manufacturer a special user interface was defined and developed. The mapping of the measured pressure distribution in real-time and accurately scaled to actual seats during test setups directly lead to design implications for seat design even during the test situation. Detailed analysis of the subject's feedback was correlated with objective measurements of the subject's pressure distribution in real time. Therefore existing seating characteristics were taken into account as well. A user interface can incorporate theoretical and validated 'state of the art' models of comfort. Consequently, this information can reduce extensive testing and lead to more detailed results in a shorter time period.

Possibility of designing catalysts beyond the traditional volcano curve: a theoretical framework for multi-phase surfaces.

PubMed

Wang, Ziyun; Wang, Hai-Feng; Hu, P

2015-10-01

The current theory of catalyst activity in heterogeneous catalysis is mainly obtained from the study of catalysts with mono-phases, while most catalysts in real systems consist of multi-phases, the understanding of which is far short of chemists' expectation. Density functional theory (DFT) and micro-kinetics simulations are used to investigate the activities of six mono-phase and nine bi-phase catalysts, using CO hydrogenation that is arguably the most typical reaction in heterogeneous catalysis. Excellent activities that are beyond the activity peak of traditional mono-phase volcano curves are found on some bi-phase surfaces. By analyzing these results, a new framework to understand the unexpected activities of bi-phase surfaces is proposed. Based on the framework, several principles for the design of multi-phase catalysts are suggested. The theoretical framework extends the traditional catalysis theory to understand more complex systems.

Testing a theoretical model of clinical nurses' intent to stay.

PubMed

Cowden, Tracy L; Cummings, Greta G

2015-01-01

Published theoretical models of nurses' intent to stay (ITS) report inconsistent outcomes, and not all hypothesized models have been adequately tested. Research has focused on cognitive rather than emotional determinants of nurses' ITS. The aim of this study was to empirically verify a complex theoretical model of nurses' ITS that includes both affective and cognitive determinants and to explore the influence of relational leadership on staff nurses' ITS. The study was a correlational, mixed-method, nonexperimental design. A subsample of the Quality Work Environment Study survey data 2009 (n = 415 nurses) was used to test our theoretical model of clinical nurses' ITS as a structural equation model. The model explained 63% of variance in ITS. Organizational commitment, empowerment, and desire to stay were the model concepts with the strongest effects on nurses' ITS. Leadership practices indirectly influenced ITS. How nurses evaluate and respond to their work environment is both an emotional and rational process. Health care organizations need to be cognizant of the influence that nurses' feelings and views of their work setting have on their intention decisions and integrate that knowledge into the development of retention strategies. Leadership practices play an important role in staff nurses' perceptions of the workplace. Identifying the mechanisms by which leadership influences staff nurses' intentions to stay presents additional focus areas for developing retention strategies.

"Growing Up" through the Middle Level Years: A Case Study in Leadership Actions Necessary to Meet Students' Needs

ERIC Educational Resources Information Center

Smith, M. Melissa Richard

2010-01-01

The purpose of this qualitative study was to examine the journey of a suburban middle level principal, as she led a school through an educational change process. This was a single case study design involving the school leader as principal participant, and the researcher as participant observer. The theoretical model that was developed for this…

Images of Inherited War: Three American Presidents in Vietnam

DTIC Science & Technology

2011-06-01

Dependent Realism to demonstrate how theoretical advances in modern physical science correlate to cognitive theories in International Relations. We...Quantum Physics and Model-Dependent Realism In his book, The Grand Design, theoretical physicist and cosmologist Stephen Hawking draws on theoretical...exhibited wave-like properties and that existing scientific laws could not account for their behavior. Newtonian physics was “built on a framework

Theoretical relationship between elastic wave velocity and electrical resistivity

NASA Astrophysics Data System (ADS)

Lee, Jong-Sub; Yoon, Hyung-Koo

2015-05-01

Elastic wave velocity and electrical resistivity have been commonly applied to estimate stratum structures and obtain subsurface soil design parameters. Both elastic wave velocity and electrical resistivity are related to the void ratio; the objective of this study is therefore to suggest a theoretical relationship between the two physical parameters. Gassmann theory and Archie's equation are applied to propose a new theoretical equation, which relates the compressional wave velocity to shear wave velocity and electrical resistivity. The piezo disk element (PDE) and bender element (BE) are used to measure the compressional and shear wave velocities, respectively. In addition, the electrical resistivity is obtained by using the electrical resistivity probe (ERP). The elastic wave velocity and electrical resistivity are recorded in several types of soils including sand, silty sand, silty clay, silt, and clay-sand mixture. The appropriate input parameters are determined based on the error norm in order to increase the reliability of the proposed relationship. The predicted compressional wave velocities from the shear wave velocity and electrical resistivity are similar to the measured compressional velocities. This study demonstrates that the new theoretical relationship may be effectively used to predict the unknown geophysical property from the measured values.

Research designs for studies evaluating the effectiveness of change and improvement strategies.

PubMed

Eccles, M; Grimshaw, J; Campbell, M; Ramsay, C

2003-02-01

The methods of evaluating change and improvement strategies are not well described. The design and conduct of a range of experimental and non-experimental quantitative designs are considered. Such study designs should usually be used in a context where they build on appropriate theoretical, qualitative and modelling work, particularly in the development of appropriate interventions. A range of experimental designs are discussed including single and multiple arm randomised controlled trials and the use of more complex factorial and block designs. The impact of randomisation at both group and individual levels and three non-experimental designs (uncontrolled before and after, controlled before and after, and time series analysis) are also considered. The design chosen will reflect both the needs (and resources) in any particular circumstances and also the purpose of the evaluation. The general principle underlying the choice of evaluative design is, however, simple-those conducting such evaluations should use the most robust design possible to minimise bias and maximise generalisability.

Engaging Bioanthropology College Students: The Role of Active and Cooperative Pedagogies

ERIC Educational Resources Information Center

Soluri, Kathaeryne Elizabeth

2010-01-01

This dissertation examines the design and implementation of an active, cooperative pedagogy in an undergraduate biological anthropology course. The research draws upon a theoretical framework constructed from anthropology, education, and psychology research. The pedagogy studied was developed for and used in the laboratory component of a large,…

An Educational Laboratory for Digital Control and Rapid Prototyping of Power Electronic Circuits

ERIC Educational Resources Information Center

Choi, Sanghun; Saeedifard, M.

2012-01-01

This paper describes a new educational power electronics laboratory that was developed primarily to reinforce experimentally the fundamental concepts presented in a power electronics course. The developed laboratory combines theoretical design, simulation studies, digital control, fabrication, and verification of power-electronic circuits based on…

Foundations of Game-Based Learning

ERIC Educational Resources Information Center

Plass, Jan L.; Homer, Bruce D.; Kinzer, Charles K.

2015-01-01

In this article we argue that to study or apply games as learning environments, multiple perspectives have to be taken into account. We first define game-based learning and gamification, and then discuss theoretical models that describe learning with games, arguing that playfulness is orthogonal to learning theory. We then review design elements…

Development of the Scale for "Convergence Thinking" in Engineering

ERIC Educational Resources Information Center

Park, Sungmi

2016-01-01

Purpose: The purpose of this paper is to define the concept of "convergence thinking" as a trading zone for knowledge fusion in the engineering field, and develops its measuring scale. Design/ Methodology/Approach: Based on results from literature review, this study clarifies a theoretical ground for "convergence thinking."…

Content Analysis of Chemistry Curricula in Germany Case Study: Chemical Reactions

ERIC Educational Resources Information Center

Timofte, Roxana S.

2015-01-01

Curriculum-assessment alignment is a well known foundation for good practice in educational assessment, for items' curricular validity purposes. Nowadays instruments are designed to measure pupils' competencies in one or more areas of competence. Sub-competence areas could be defined theoretically and statistical analysis of empirical data by…

Cognitive Therapy and Assertive Training in the Treatment of Depression in Women.

ERIC Educational Resources Information Center

LaPointe, Karen A.

Little empirical study has been done on the efficacy of the variety of psychological approaches used to treat depression. The author reviews theoretical points of view: psychoanalytic, cognitive and behavioral, and constructs an experimental design to compare the relative effectiveness of cognitive therapy, assertiveness training and insight…

An Examination of Learning Profiles in Physical Education

ERIC Educational Resources Information Center

Shen, Bo; Chen, Ang

2007-01-01

Using the model of domain learning as a theoretical framework, the study was designed to examine the extent to which learners' initial learning profiles based on previously acquired knowledge, learning strategy application, and interest-based motivation were distinctive in learning softball. Participants were 177 sixth-graders from three middle…

Using Achievement Goals and Interest to Predict Learning in Physical Education

ERIC Educational Resources Information Center

Shen, Bo; Chen, Ang; Guan, Jianmin

2007-01-01

On the basis of an integrated theoretical approach to achievement motivation, the authors designed this study to investigate the potential influence of mastery goal, performance-approach and avoidance-approach goals, individual interest, and situational interest on students' learning in a physical education softball unit. The authors collected and…

Becoming an Entrepreneur: Researching the Role of Mentors in Identity Construction

ERIC Educational Resources Information Center

Rigg, Clare; O'Dwyer, Breda

2012-01-01

Purpose: The purpose of this paper is to provide a theoretical discussion of a developing epistemology and methodology for a qualitative study of participants of enterprise education in south-west Ireland, run collaboratively between third level academics, a regional development agency, and entrepreneurs. Design/methodology/approach: The…

Satisfaction Analysis of Experiential Learning-Based Popular Science Education

ERIC Educational Resources Information Center

Dzan, Wei-Yuan; Tsai, Huei-Yin; Lou, Shi-Jer; Shih, Ru-Chu

2015-01-01

This study employed Kolb's experiential learning model-specific experiences, observations of reflections, abstract conceptualization, and experiment-action in activities to serve as the theoretical basis for popular science education planning. It designed the six activity themes of "Knowledge of the Ocean, Easy to Know, See the Large from the…

An Ecological Approach to the On-Line Assessment of Problem-Solving Paths: Principles and Applications.

ERIC Educational Resources Information Center

Shaw, Robert E.; And Others

1997-01-01

Proposes a theoretical framework for designing online-situated assessment tools for multimedia instructional systems. Uses a graphic method based on ecological psychology to monitor student performance through a learning activity. Explores the method's feasibility in case studies describing instructional systems teaching critical-thinking and…

Routines in School Organizations: Creating Stability and Change

ERIC Educational Resources Information Center

Conley, Sharon; Enomoto, Ernestine K.

2005-01-01

Purpose: This paper presents routinized action theory as a way to examine the regular, habitual activities that occur in school organizations. Using this theoretical lens, school routines were analyzed in order to understand organizational stability and change. Design/methodology/approach: Using case study methods, three discrete cases are…

Integrated Theoretical, Computational, and Experimental Studies for Transition Estimation and Control

DTIC Science & Technology

2014-06-03

nozzle exit) was developed to aid in porting the VENOM diagnostic to high-enthalpy impulse tunnels. Measurements were also made in the supersonic high...Colonius T, Fedorov AV. 2009. Alternate designs of ultrasonic absorptive coatings for hypersonic boundary layer control. AIAA Pap. No. 2009-4217 51. Craig

Understanding How Adolescents with Reading Difficulties Utilize Technology-Based Tools

ERIC Educational Resources Information Center

Marino, Matthew T.

2009-01-01

This article reports the findings from a study that examined how adolescent students with reading difficulties utilized cognitive tools that were embedded in a technology-based middle school science curriculum. The curriculum contained salient features of the Universal Design for Learning (UDL) theoretical framework. Sixteen general education…

Six Sigma in Education

ERIC Educational Resources Information Center

LeMahieu, Paul G.; Nordstrum, Lee E.; Cudney, Elizabeth A.

2017-01-01

Purpose: This paper is one of seven in this volume that aims to elaborate different approaches to quality improvement in education. It delineates a methodology called Six Sigma. Design/methodology/approach: The paper presents the origins, theoretical foundations, core principles and a case study demonstrating an application of Six Sigma in a…

Positive Deviance: Learning from Positive Anomalies

ERIC Educational Resources Information Center

LeMahieu, Paul G.; Nordstrum, Lee E.; Gale, Dick

2017-01-01

Purpose: This paper is one of seven in this volume, each elaborating different approaches to quality improvement in education. The purpose of this paper is to delineate a methodology called positive deviance. Design/methodology/approach: The paper presents the origins, theoretical foundations, core principles and a case study demonstrating an…

Spending on School Infrastructure: Does Money Matter?

ERIC Educational Resources Information Center

Crampton, Faith E.

2009-01-01

Purpose: The purpose of this study is to further develop an emerging thread of quantitative research that grounds investment in school infrastructure in a unified theoretical framework of investment in human, social, and physical capital. Design/methodology/approach: To answer the research question, what is the impact of investment in human,…

Designing Caregiver-Implemented Shared-Reading Interventions to Overcome Implementation Barriers

ERIC Educational Resources Information Center

Justice, Laura M.; Logan, Jessica R.; Damschroder, Laura

2015-01-01

Purpose: This study presents an application of the theoretical domains framework (TDF; Michie et al., 2005), an integrative framework drawing on behavior-change theories, to speech-language pathology. Methods: A multistep procedure was used to identify barriers affecting caregivers' implementation of shared-reading interventions with their…

Perceived Impact of an Outdoor Orientation Program for First-Year University Students

ERIC Educational Resources Information Center

Wolfe, Brent D.; Kay, Gregor

2011-01-01

Colleges and universities across the United States are struggling with student retention and attrition (Derby & Smith, 2004; Jacobs & Archie, 2008; Tinto, 1993). As a result, theoretically supported interventions designed to encourage retention and persistence are needed. The purpose of this study was twofold: (a) to intentionally create…

Methods That Matter in Addressing Cultural Diversity with Teacher Candidates

ERIC Educational Resources Information Center

Acquah, Emmanuel O.; Commins, Nancy L.

2017-01-01

Drawing on a combination of prior experience, theoretical stance, and intuition, along with pedagogical practices identified to be effective in addressing diversity with teacher candidates, a model for teaching multicultural education to teacher candidates was designed. This study examined how particular elements of this model were effective in…

A New Typology of Home-Care Helpers

ERIC Educational Resources Information Center

Porter, Eileen J.; Ganong, Lawrence H.; Drew, Nancy; Lanes, Tracy I.

2004-01-01

Purpose: The formal-informal dichotomy of home care, which has been a theoretical framework in quantitative and qualitative research, might not be descriptive of older persons' views about their home-care providers. This qualitative study explores the perspectives of older women about the characteristics of their home-care providers. Design and…

Applying Threshold Concepts to Finance Education

ERIC Educational Resources Information Center

Hoadley, Susan; Wood, Leigh N.; Tickle, Leonie; Kyng, Tim

2016-01-01

Purpose: The purpose of this paper is to investigate and identify threshold concepts that are the essential conceptual content of finance programmes. Design/Methodology/Approach: Conducted in three stages with finance academics and students, the study uses threshold concepts as both a theoretical framework and a research methodology. Findings: The…

SCALE-UP OF RAPID SMALL-SCALE ADSORPTION TESTS TO FIELD-SCALE ADSORBERS: THEORETICAL AND EXPERIMENTAL BASIS

EPA Science Inventory

Design of full-scale adsorption systems typically includes expensive and time-consuming pilot studies to simulate full-scale adsorber performance. Accordingly, the rapid small-scale column test (RSSCT) was developed and evaluated experimentally. The RSSCT can simulate months of f...

RANDOMIZATION PROCEDURES FOR THE ANALYSIS OF EDUCATIONAL EXPERIMENTS.

ERIC Educational Resources Information Center

COLLIER, RAYMOND O.

CERTAIN SPECIFIC ASPECTS OF HYPOTHESIS TESTS USED FOR ANALYSIS OF RESULTS IN RANDOMIZED EXPERIMENTS WERE STUDIED--(1) THE DEVELOPMENT OF THE THEORETICAL FACTOR, THAT OF PROVIDING INFORMATION ON STATISTICAL TESTS FOR CERTAIN EXPERIMENTAL DESIGNS AND (2) THE DEVELOPMENT OF THE APPLIED ELEMENT, THAT OF SUPPLYING THE EXPERIMENTER WITH MACHINERY FOR…

Cultivating Self-Awareness in Counselors-in-Training through Group Supervision

ERIC Educational Resources Information Center

Del Moro, Ronald R.

2012-01-01

This study investigated processes, strategies, and frameworks that took place during group supervision classes, which best cultivate the self-awareness of Mental Health and Marriage and Family Counselors-in-Training (CITs). It was designed to explore factors across multiple theoretical models, which contributed to the cultivation of self-awareness…

Research on Cleaning Up in San Diego.

ERIC Educational Resources Information Center

Middleman, Stanley

1983-01-01

Discusses the evolution of a set of research programs (dealing with the removal of liquid contaminants from surfaces) used to introduce graduate students to methods of design, evaluation, and modification within the context of a larger research program. Stresses the simultaneity and interaction of theoretical and experimental studies. (JM)

New perspectives in offshore wind energy

PubMed Central

Failla, Giuseppe; Arena, Felice

2015-01-01

The design of offshore wind turbines is one of the most fascinating challenges in renewable energy. Meeting the objective of increasing power production with reduced installation and maintenance costs requires a multi-disciplinary approach, bringing together expertise in different fields of engineering. The purpose of this theme issue is to offer a broad perspective on some crucial aspects of offshore wind turbines design, discussing the state of the art and presenting recent theoretical and experimental studies. PMID:25583869

Building qualitative study design using nursing's disciplinary epistemology.

PubMed

Thorne, Sally; Stephens, Jennifer; Truant, Tracy

2016-02-01

To discuss the implications of drawing on core nursing knowledge as theoretical scaffolding for qualitative nursing enquiry. Although nurse scholars have been using qualitative methods for decades, much of their methodological direction derives from conventional approaches developed for answering questions in the social sciences. The quality of available knowledge to inform practice can be enhanced through the selection of study design options informed by an appreciation for the nature of nursing knowledge. Discussion paper. Drawing on the body of extant literature dealing with nursing's theoretical and qualitative research traditions, we consider contextual factors that have shaped the application of qualitative research approaches in nursing, including prior attempts to align method with the structure and form of disciplinary knowledge. On this basis, we critically reflect on design considerations that would follow logically from core features associated with a nursing epistemology. The substantive knowledge used by nurses to inform their practice includes both aspects developed at the level of the general and also that which pertains to application in the unique context of the particular. It must be contextually relevant to a fluid and dynamic healthcare environment and adaptable to distinctive patient conditions. Finally, it must align with nursing's moral mandate and action imperative. Qualitative research design components informed by nursing's disciplinary epistemology will help ensure a logical line of reasoning in our enquiries that remains true to the nature and structure of practice knowledge. © 2015 John Wiley & Sons Ltd.

Design and Analyze a New Measuring Lift Device for Fin Stabilizers Using Stiffness Matrix of Euler-Bernoulli Beam

PubMed Central

Liang, Lihua; Sun, Mingxiao; Shi, Hongyu; Luan, Tiantian

2017-01-01

Fin-angle feedback control is usually used in conventional fin stabilizers, and its actual anti-rolling effect is difficult to reach theoretical design requirements. Primarily, lift of control torque is a theoretical value calculated by static hydrodynamic characteristics of fin. However, hydrodynamic characteristics of fin are dynamic while fin is moving in waves. As a result, there is a large deviation between actual value and theoretical value of lift. Firstly, the reasons of deviation are analyzed theoretically, which could avoid a variety of interference factors and complex theoretical derivations. Secondly, a new device is designed for direct measurement of actual lift, which is composed of fin-shaft combined mechanism and sensors. This new device can make fin-shaft not only be the basic function of rotating fin, but also detect actual lift. Through analysis using stiffness matrix of Euler-Bernoulli beam, displacement of shaft-core end is measured instead of lift which is difficult to measure. Then quantitative relationship between lift and displacement is defined. Three main factors are analyzed with quantitative relationship. What is more, two installation modes of sensors and a removable shaft-end cover are proposed according to hydrodynamic characteristics of fin. Thus the new device contributes to maintenance and measurement. Lastly, the effectiveness and accuracy of device are verified by contrasting calculation and simulation on the basis of actual design parameters. And the new measuring lift method can be proved to be effective through experiments. The new device is achieved from conventional fin stabilizers. Accordingly, the reliability of original equipment is inherited. The alteration of fin stabilizers is minor, which is suitable for engineering application. In addition, the flexural properties of fin-shaft are digitized with analysis of stiffness matrix. This method provides theoretical support for engineering application by carrying out finite element analysis with computers. PMID:28046122

A practice course to cultivate students' comprehensive ability of photoelectricity

NASA Astrophysics Data System (ADS)

Lv, Yong; Liu, Yang; Niu, Chunhui; Liu, Lishuang

2017-08-01

After the studying of many theoretical courses, it's important and urgent for the students from specialty of optoelectronic information science and engineering to cultivate their comprehensive ability of photoelectricity. We set up a comprehensive practice course named "Integrated Design of Optoelectronic Information System" (IDOIS) for the purpose that students can integrate their knowledge of optics, electronics and computer programming to design, install and debug an optoelectronic system with independent functions. Eight years of practice shows that this practice course can train students' ability of analysis, design/development and debugging of photoelectric system, improve their ability in document retrieval, design proposal and summary report writing, teamwork, innovation consciousness and skill.

How scientific experiments are designed: Problem solving in a knowledge-rich, error-rich environment

NASA Astrophysics Data System (ADS)

Baker, Lisa M.

While theory formation and the relation between theory and data has been investigated in many studies of scientific reasoning, researchers have focused less attention on reasoning about experimental design, even though the experimental design process makes up a large part of real-world scientists' reasoning. The goal of this thesis was to provide a cognitive account of the scientific experimental design process by analyzing experimental design as problem-solving behavior (Newell & Simon, 1972). Three specific issues were addressed: the effect of potential error on experimental design strategies, the role of prior knowledge in experimental design, and the effect of characteristics of the space of alternate hypotheses on alternate hypothesis testing. A two-pronged in vivo/in vitro research methodology was employed, in which transcripts of real-world scientific laboratory meetings were analyzed as well as undergraduate science and non-science majors' design of biology experiments in the psychology laboratory. It was found that scientists use a specific strategy to deal with the possibility of error in experimental findings: they include "known" control conditions in their experimental designs both to determine whether error is occurring and to identify sources of error. The known controls strategy had not been reported in earlier studies with science-like tasks, in which participants' responses to error had consisted of replicating experiments and discounting results. With respect to prior knowledge: scientists and undergraduate students drew on several types of knowledge when designing experiments, including theoretical knowledge, domain-specific knowledge of experimental techniques, and domain-general knowledge of experimental design strategies. Finally, undergraduate science students generated and tested alternates to their favored hypotheses when the space of alternate hypotheses was constrained and searchable. This result may help explain findings of confirmation bias in earlier studies using science-like tasks, in which characteristics of the alternate hypothesis space may have made it unfeasible for participants to generate and test alternate hypotheses. In general, scientists and science undergraduates were found to engage in a systematic experimental design process that responded to salient features of the problem environment, including the constant potential for experimental error, availability of alternate hypotheses, and access to both theoretical knowledge and knowledge of experimental techniques.

Analytical and scale model research aimed at improved hangglider design

NASA Technical Reports Server (NTRS)

Kroo, I.; Chang, L. S.

1979-01-01

Research consisted of a theoretical analysis which attempts to predict aerodynamic characteristics using lifting surface theory and finite-element structural analysis as well as an experimental investigation using 1/5 scale elastically similar models in the NASA Ames 2m x 3m (7' x 10') wind tunnel. Experimental data were compared with theoretical results in the development of a computer program which may be used in the design and evaluation of ultralight gliders.

Implications of "Too Good to Be True" for Replication, Theoretical Claims, and Experimental Design: An Example Using Prominent Studies of Racial Bias.

PubMed

Francis, Gregory

2016-01-01

In response to concerns about the validity of empirical findings in psychology, some scientists use replication studies as a way to validate good science and to identify poor science. Such efforts are resource intensive and are sometimes controversial (with accusations of researcher incompetence) when a replication fails to show a previous result. An alternative approach is to examine the statistical properties of the reported literature to identify some cases of poor science. This review discusses some details of this process for prominent findings about racial bias, where a set of studies seems "too good to be true." This kind of analysis is based on the original studies, so it avoids criticism from the original authors about the validity of replication studies. The analysis is also much easier to perform than a new empirical study. A variation of the analysis can also be used to explore whether it makes sense to run a replication study. As demonstrated here, there are situations where the existing data suggest that a direct replication of a set of studies is not worth the effort. Such a conclusion should motivate scientists to generate alternative experimental designs that better test theoretical ideas.

Implications of “Too Good to Be True” for Replication, Theoretical Claims, and Experimental Design: An Example Using Prominent Studies of Racial Bias

PubMed Central

Francis, Gregory

2016-01-01

In response to concerns about the validity of empirical findings in psychology, some scientists use replication studies as a way to validate good science and to identify poor science. Such efforts are resource intensive and are sometimes controversial (with accusations of researcher incompetence) when a replication fails to show a previous result. An alternative approach is to examine the statistical properties of the reported literature to identify some cases of poor science. This review discusses some details of this process for prominent findings about racial bias, where a set of studies seems “too good to be true.” This kind of analysis is based on the original studies, so it avoids criticism from the original authors about the validity of replication studies. The analysis is also much easier to perform than a new empirical study. A variation of the analysis can also be used to explore whether it makes sense to run a replication study. As demonstrated here, there are situations where the existing data suggest that a direct replication of a set of studies is not worth the effort. Such a conclusion should motivate scientists to generate alternative experimental designs that better test theoretical ideas. PMID:27713708

Measuring safety climate in health care.

PubMed

Flin, R; Burns, C; Mearns, K; Yule, S; Robertson, E M

2006-04-01

To review quantitative studies of safety climate in health care to examine the psychometric properties of the questionnaires designed to measure this construct. A systematic literature review was undertaken to study sample and questionnaire design characteristics (source, no of items, scale type), construct validity (content validity, factor structure and internal reliability, concurrent validity), within group agreement, and level of analysis. Twelve studies were examined. There was a lack of explicit theoretical underpinning for most questionnaires and some instruments did not report standard psychometric criteria. Where this information was available, several questionnaires appeared to have limitations. More consideration should be given to psychometric factors in the design of healthcare safety climate instruments, especially as these are beginning to be used in large scale surveys across healthcare organisations.

A parametric study of harmonic rotor hub loads

NASA Technical Reports Server (NTRS)

He, Chengjian

1993-01-01

A parametric study of vibratory rotor hub loads in a nonrotating system is presented. The study is based on a CAMRAD/JA model constructed for the GBH (Growth Version of Blackhawk Helicopter) Mach-scaled wind tunnel rotor model with high blade twist (-16 deg). The theoretical hub load predictions are validated by correlation with available measured data. Effects of various blade aeroelastic design changes on the harmonic nonrotating frame hub loads at both low and high forward flight speeds are investigated. The study aims to illustrate some of the physical mechanisms for change in the harmonic rotor hub loads due to blade design variations.

The transfer of theoretical knowledge to clinical practice by nursing students and the difficulties they experience: A qualitative study.

PubMed

Günay, Ulviye; Kılınç, Gülsen

2018-06-01

Nursing education contains both theoretical and practical training processes. Clinical training is the basis of nursing education. The quality of clinical training is closely related to the quality of the clinical learning environment. This study aimed to determine the transfer of theoretical knowledge into clinical practice by nursing students and the difficulties they experience during this process. A qualitative research design was used in the study. The study was conducted in 2015 with 30 nursing students in a university located in the east of Turkey, constituting three focus groups. The questions directed to the students during the focus group interviews were as follows: What do you think about your clinical training? How do you evaluate yourself in the process of putting your theoretical knowledge into clinical practice? What kind of difficulties are you experiencing in clinical practices? The data were interpreted using the method of content analysis. Most of the students reported that theoretical information they received was excessive, their ability to put most of this information into practice was weak, and they lacked courage to touch patients for fear of implementing procedures incorrectly. As a result of the analysis of the data, five main themes were determined: clinical training, guidance and communication, hospital environment and expectations. The results of this study showed that nursing students found their clinical knowledge and skills insufficient and usually failed to transfer their theoretical knowledge into clinical practices. The study observed that nursing students experienced various issues in clinical practices. In order to fix these issues and achieve an effective clinical training environment, collaboration should be achieved among nursing instructors, nurses, nursing school and hospital managements. Additionally, the number of nursing educators should be increased and training programs should be provided regarding effective clinical training methods. Copyright © 2018 Elsevier Ltd. All rights reserved.

A theoretical approach to sound propagation and radiation for ducts with suppressors

NASA Technical Reports Server (NTRS)

Rice, E. J.; Sawdy, D. T.

1981-01-01

The several phenomena involved in theoretical prediction of the far-field sound radiation attenuation from an acoustically lined duct were studied. These include absorption by the suppressor, termination reflections, and far-field radiation. Extensive parametric studies show that the suppressor absorption performance can be correlated with mode cut-off ratio or angle of propagation. The other phenomena can be shown to depend explicitly upon mode cut-off ratio. A complete system can thus be generated which can be used to evaluate aircraft sound suppressors and which can be related to the sound source through the cut-off ratio-acoustic power distribution. Although the method is most fully developed for inlet suppressors, several aft radiated noise phenomena are also discussed. This simplified suppressor design and evaluation method is summarized, the recent improvements in the technique are presented, and areas where further refinement is necessary are discussed. Noise suppressor data from engine experiments are compared with the theoretical calculations.

A review of recent theoretical studies in nonlinear crystals: towards the design of new materials

NASA Astrophysics Data System (ADS)

Luppi, Eleonora; Véniard, Valérie

2016-12-01

Nonlinear optics is an important and exciting field of fundamental and applied research, with applications in many different disciplines such as physics chemistry, material science and biology. In the recent years, nonlinear optical phenomena started to be also widely used in technological applications for optoelectronics and photovoltaics. This coincided with an important experimental and theoretical search for new materials with an efficient and exploitable nonlinear optical response. Here, starting from the discovery of nonlinear optics, we review the most important theoretical formalisms developed to understand, interpret and predict the nonlinear optical phenomena. We show the different level of approximation of the many-electrons interactions that these formalisms can describe which are fundamental in the interpretation of the experiments. The impact of the theory is then analyzed on different classes of new materials particularly studied in these years: silicon bulk to nano, compound semiconductors, graphene, transition metal dichalcogenide, hexagonal boron nitride and borate crystals.

Excess capacity: markets regulation, and values.

PubMed Central

Madden, C W

1999-01-01

OBJECTIVE: To examine the conceptual bases for the conflicting views of excess capacity in healthcare markets and their application in the context of today's turbulent environment. STUDY SETTING: The policy and research literature of the past three decades. STUDY DESIGN: The theoretical perspectives of alternative economic schools of thought are used to support different policy positions with regard to excess capacity. Changes in these policy positions over time are linked to changes in the economic and political environment of the period. The social values implied by this history are articulated. DATA COLLECTION: Standard library search procedures are used to identify relevant literature. PRINCIPAL FINDINGS: Alternative policy views of excess capacity in healthcare markets rely on differing theoretical foundations. Changes in the context in which policy decisions are made over time affect the dominant theoretical framework and, therefore, the dominant policy view of excess capacity. CONCLUSIONS: In the 1990s, multiple perspectives of optimal capacity still exist. However, our evolving history suggests a set of persistent values that should guide future policy in this area. PMID:10029502

Application of a theoretical model to evaluate COPD disease management.

PubMed

Lemmens, Karin M M; Nieboer, Anna P; Rutten-Van Mölken, Maureen P M H; van Schayck, Constant P; Asin, Javier D; Dirven, Jos A M; Huijsman, Robbert

2010-03-26

Disease management programmes are heterogeneous in nature and often lack a theoretical basis. An evaluation model has been developed in which theoretically driven inquiries link disease management interventions to outcomes. The aim of this study is to methodically evaluate the impact of a disease management programme for patients with chronic obstructive pulmonary disease (COPD) on process, intermediate and final outcomes of care in a general practice setting. A quasi-experimental research was performed with 12-months follow-up of 189 COPD patients in primary care in the Netherlands. The programme included patient education, protocolised assessment and treatment of COPD, structural follow-up and coordination by practice nurses at 3, 6 and 12 months. Data on intermediate outcomes (knowledge, psychosocial mediators, self-efficacy and behaviour) and final outcomes (dyspnoea, quality of life, measured by the CRQ and CCQ, and patient experiences) were obtained from questionnaires and electronic registries. Implementation of the programme was associated with significant improvements in dyspnoea (p < 0.001) and patient experiences (p < 0.001). No significant improvement was found in mean quality of life scores. Improvements were found in several intermediate outcomes, including investment beliefs (p < 0.05), disease-specific knowledge (p < 0.01; p < 0.001) and medication compliance (p < 0.01). Overall, process improvement was established. The model showed associations between significantly improved intermediate outcomes and improvements in quality of life and dyspnoea. The application of a theory-driven model enhances the design and evaluation of disease management programmes aimed at improving health outcomes. This study supports the notion that a theoretical approach strengthens the evaluation designs of complex interventions. Moreover, it provides prudent evidence that the implementation of COPD disease management programmes can positively influence outcomes of care.

Application of a theoretical model to evaluate COPD disease management

PubMed Central

2010-01-01

Background Disease management programmes are heterogeneous in nature and often lack a theoretical basis. An evaluation model has been developed in which theoretically driven inquiries link disease management interventions to outcomes. The aim of this study is to methodically evaluate the impact of a disease management programme for patients with chronic obstructive pulmonary disease (COPD) on process, intermediate and final outcomes of care in a general practice setting. Methods A quasi-experimental research was performed with 12-months follow-up of 189 COPD patients in primary care in the Netherlands. The programme included patient education, protocolised assessment and treatment of COPD, structural follow-up and coordination by practice nurses at 3, 6 and 12 months. Data on intermediate outcomes (knowledge, psychosocial mediators, self-efficacy and behaviour) and final outcomes (dyspnoea, quality of life, measured by the CRQ and CCQ, and patient experiences) were obtained from questionnaires and electronic registries. Results Implementation of the programme was associated with significant improvements in dyspnoea (p < 0.001) and patient experiences (p < 0.001). No significant improvement was found in mean quality of life scores. Improvements were found in several intermediate outcomes, including investment beliefs (p < 0.05), disease-specific knowledge (p < 0.01; p < 0.001) and medication compliance (p < 0.01). Overall, process improvement was established. The model showed associations between significantly improved intermediate outcomes and improvements in quality of life and dyspnoea. Conclusions The application of a theory-driven model enhances the design and evaluation of disease management programmes aimed at improving health outcomes. This study supports the notion that a theoretical approach strengthens the evaluation designs of complex interventions. Moreover, it provides prudent evidence that the implementation of COPD disease management programmes can positively influence outcomes of care. PMID:20346135

Efficacy of cognitive rehabilitation therapies for mild cognitive impairment (MCI) in older adults: Working toward a theoretical model and evidence-based interventions

PubMed Central

Huckans, Marilyn; Hutson, Lee; Twamley, Elizabeth; Jak, Amy; Kaye, Jeffrey; Storzbach, Daniel

2013-01-01

Objective To evaluate the efficacy of cognitive rehabilitation therapies (CRTs) for mild cognitive impairment (MCI). Our review revealed a need for evidence-based treatments for MCI and a lack of a theoretical rehabilitation model to guide the development and evaluation of these interventions. We have thus proposed a theoretical rehabilitation model of MCI that yields key intervention targets - cognitive compromise, functional compromise, neuropsychiatric symptoms, and modifiable risk and protective factors known to be associated with MCI and dementia. Our model additionally defines specific cognitive rehabilitation approaches that may directly or indirectly target key outcomes - restorative cognitive training, compensatory cognitive training, lifestyle interventions, and psychotherapeutic techniques. Methods Fourteen randomized controlled trials met inclusion criteria and were reviewed. Results Studies markedly varied in terms of intervention approaches and selected outcome measures and were frequently hampered by design limitations. The bulk of the evidence suggested that CRTs can change targeted behaviors in individuals with MCI and that CRTs are associated with improvements in objective cognitive performance, but the pattern of effects on specific cognitive domains was inconsistent across studies. Other important outcomes (i.e., daily functioning, quality of life, neuropsychiatric symptom severity) were infrequently assessed across studies. Few studies evaluated long-term outcomes or the impact of CRTs on conversion rates from MCI to dementia or normal cognition. Conclusions Overall, results from trials are promising but inconclusive. Additional well-designed and adequately powered trials are warranted and required before CRTs for MCI can be considered evidence based. PMID:23471631

Domain-Specific Aspects of Technological Pedagogical Content Knowledge: Music Education and the Importance of Affect

ERIC Educational Resources Information Center

Macrides, Elena; Angeli, Charoula

2018-01-01

The present study addresses the lack of a theoretical framework for the integration of technology in music teaching and learning, and explores, within the framework of Technological Pedagogical Content Knowledge (TPACK), the importance of affect in the instructional design of music lessons. The purpose of this study is twofold: (a) to extend the…

Students' Perceptions on Environmental Management of HEIs and the Role of Social Capital: A Case Study in the University of the Aegean

ERIC Educational Resources Information Center

Jones, Nikoleta; Roumeliotis, Spiridon; Iosifides, Theodoros; Hatziantoniou, Maria; Sfakianaki, Eleni; Tsigianni, Eleni; Thivaiou, Kalliopi; Biliraki, Athina; Evaggelinos, Kostas

2013-01-01

Purpose: The aim of the present study is to contribute to the discussion introducing the concept of social capital as a significant parameter influencing students' perceptions concerning greening initiatives in HEIs. Design/methodology/approach: A theoretical analysis is presented concerning the possible links of social capital components with…