Sample records for thermal maximum htm

  1. Contradictory cooling in a warmer world? the climate of the Mediterranean region during the ';Holocene Thermal Maximum'

    NASA Astrophysics Data System (ADS)

    Davis, B.

    2013-12-01

    Extensive evidence from high latitudes of the Northern Hemisphere indicates that temperatures were warmer than present during the early-mid Holocene, a period known as the Holocene thermal maximum (HTM). The existence of the HTM over lower mid-latitudes and the sub-tropics however is less clear, with pollen-based reconstructions in particular actually indicating a contrary cooling at this time in these regions. This apparent cooling is controversial because it is not shown in climate model simulations, which indicate that the HTM occurred across all extra-tropical latitudes of the Northern Hemisphere. This is also supported by alkenone based SST reconstructions, which also show a much more widespread HTM than indicated by the pollen data. Here this problem is investigated by reviewing the evidence both for, and against, the HTM in the Mediterranean region, which represents one of the most intensively studied regions of sub-tropical climate in the Northern Hemisphere. This evidence includes a large number of both marine and terrestrial records that can be directly compared due to their close proximity around the Mediterranean Sea. The results highlight the potential for bias in both marine and terrestrial climate proxies, but despite many criticisms of the pollen-based record, it is shown that the existence of more extensive temperate vegetation in the early-mid Holocene in the Mediterranean is difficult to explain by anything other than a cooler climate. For instance, vegetation models driven by climate model output show that the warmer climate suggested by the models produces a HTM vegetation even more arid than today. The results have important implications in the interpretation of proxy records, but perhaps most importantly, the potential for climate models to underestimate cooling processes in a warmer world needs further investigation.

  2. Holocene thermal maximum in the western Arctic (0-180°W)

    USGS Publications Warehouse

    Kaufman, D.S.; Ager, T.A.; Anderson, N.J.; Anderson, P.M.; Andrews, John T.; Bartlein, P.J.; Brubaker, L.B.; Coats, Larry L.; Cwynar, L.C.; Duvall, M.L.; Dyke, A.S.; Edwards, M.E.; Eisner, Wendy R.; Gajewski, K.; Geirsdottir, A.; Hu, F.-S.; Jennings, A.E.; Kaplan, M.R.; Kerwin, M.W.; Lozhkin, A.V.; MacDonald, G.M.; Miller, G.H.; Mock, Cary J.; Oswald, W.W.; Otto-Bliesner, B. L.; Porinchu, David F.; Ruhland, K.; Smol, J.P.; Steig, E.J.; Wolfe, B.B.

    2004-01-01

    The spatio-temporal pattern of peak Holocene warmth (Holocene thermal maximum, HTM) is traced over 140 sites across the Western Hemisphere of the Arctic (0-180??W; north of ???60??N). Paleoclimate inferences based on a wide variety of proxy indicators provide clear evidence for warmer-than-present conditions at 120 of these sites. At the 16 terrestrial sites where quantitative estimates have been obtained, local HTM temperatures (primarily summer estimates) were on average 1.6??0.8??C higher than present (approximate average of the 20th century), but the warming was time-transgressive across the western Arctic. As the precession-driven summer insolation anomaly peaked 12-10ka (thousands of calendar years ago), warming was concentrated in northwest North America, while cool conditions lingered in the northeast. Alaska and northwest Canada experienced the HTM between ca 11 and 9ka, about 4000yr prior to the HTM in northeast Canada. The delayed warming in Quebec and Labrador was linked to the residual Laurentide Ice Sheet, which chilled the region through its impact on surface energy balance and ocean circulation. The lingering ice also attests to the inherent asymmetry of atmospheric and oceanic circulation that predisposes the region to glaciation and modulates the pattern of climatic change. The spatial asymmetry of warming during the HTM resembles the pattern of warming observed in the Arctic over the last several decades. Although the two warmings are described at different temporal scales, and the HTM was additionally affected by the residual Laurentide ice, the similarities suggest there might be a preferred mode of variability in the atmospheric circulation that generates a recurrent pattern of warming under positive radiative forcing. Unlike the HTM, however, future warming will not be counterbalanced by the cooling effect of a residual North American ice sheet. ?? 2003 Elsevier Ltd. All rights reserved.

  3. Holocene thermal maximum in the western Arctic (0-180°W)

    NASA Astrophysics Data System (ADS)

    Kaufman, D. S.; Ager, T. A.; Anderson, N. J.; Anderson, P. M.; Andrews, J. T.; Bartlein, P. J.; Brubaker, L. B.; Coats, L. L.; Cwynar, L. C.; Duvall, M. L.; Dyke, A. S.; Edwards, M. E.; Eisner, W. R.; Gajewski, K.; Geirsdóttir, A.; Hu, F. S.; Jennings, A. E.; Kaplan, M. R.; Kerwin, M. W.; Lozhkin, A. V.; MacDonald, G. M.; Miller, G. H.; Mock, C. J.; Oswald, W. W.; Otto-Bliesner, B. L.; Porinchu, D. F.; Rühland, K.; Smol, J. P.; Steig, E. J.; Wolfe, B. B.

    2004-03-01

    The spatio-temporal pattern of peak Holocene warmth (Holocene thermal maximum, HTM) is traced over 140 sites across the Western Hemisphere of the Arctic (0-180°W; north of ˜60°N). Paleoclimate inferences based on a wide variety of proxy indicators provide clear evidence for warmer-than-present conditions at 120 of these sites. At the 16 terrestrial sites where quantitative estimates have been obtained, local HTM temperatures (primarily summer estimates) were on average 1.6±0.8°C higher than present (approximate average of the 20th century), but the warming was time-transgressive across the western Arctic. As the precession-driven summer insolation anomaly peaked 12-10 ka (thousands of calendar years ago), warming was concentrated in northwest North America, while cool conditions lingered in the northeast. Alaska and northwest Canada experienced the HTM between ca 11 and 9 ka, about 4000 yr prior to the HTM in northeast Canada. The delayed warming in Quebec and Labrador was linked to the residual Laurentide Ice Sheet, which chilled the region through its impact on surface energy balance and ocean circulation. The lingering ice also attests to the inherent asymmetry of atmospheric and oceanic circulation that predisposes the region to glaciation and modulates the pattern of climatic change. The spatial asymmetry of warming during the HTM resembles the pattern of warming observed in the Arctic over the last several decades. Although the two warmings are described at different temporal scales, and the HTM was additionally affected by the residual Laurentide ice, the similarities suggest there might be a preferred mode of variability in the atmospheric circulation that generates a recurrent pattern of warming under positive radiative forcing. Unlike the HTM, however, future warming will not be counterbalanced by the cooling effect of a residual North American ice sheet.

  4. Evaluating CO2 and CH4 dynamics of Alaskan ecosystems during the Holocene Thermal Maximum

    USGS Publications Warehouse

    He, Yujie; Jones, Miriam C.; Zhuang, Qianlai; Bochicchio, Christopher; Felzer, B. S.; Mason, Erik; Yu, Zicheng

    2014-01-01

    The Arctic has experienced much greater warming than the global average in recent decades due to polar amplification. Warming has induced ecological changes that have impacted climate carbon-cycle feedbacks, making it important to understand the climate and vegetation controls on carbon (C) dynamics. Here we used the Holocene Thermal Maximum (HTM, 11–9 ka BP, 1 ka BP = 1000 cal yr before present) in Alaska as a case study to examine how ecosystem Cdynamics responded to the past warming climate using an integrated approach of combining paleoecological reconstructions and ecosystem modeling. Our paleoecological synthesis showed expansion of deciduous broadleaf forest (dominated by Populus) into tundra and the establishment of boreal evergreen needleleaf and mixed forest during the second half of the HTM under a warmer- and wetter-than-before climate, coincident with the occurrence of the highest net primary productivity, cumulative net ecosystem productivity, soil C accumulation and CH4 emissions. These series of ecological and biogeochemical shifts mirrored the solar insolation and subsequent temperature and precipitation patterns during HTM, indicating the importance of climate controls on C dynamics. Our simulated regional estimate of CH4 emission rates from Alaska during the HTM ranged from 3.5 to 6.4 Tg CH4 yr−1 and highest annual NPP of 470 Tg C yr−1, significantly higher than previously reported modern estimates. Our results show that the differences in static vegetation distribution maps used in simulations of different time slices have greater influence on modeled C dynamics than climatic fields within each time slice, highlighting the importance of incorporating vegetation community dynamics and their responses to climatic conditions in long-term biogeochemical modeling.

  5. Correlation of microstructure and thermo-mechanical properties of a novel hydrogen transport membrane

    NASA Astrophysics Data System (ADS)

    Zhang, Yongjun

    A key part of the FutureGen concept is to support the production of hydrogen to fuel a "hydrogen economy," with the use of clean burning hydrogen in power-producing fuel cells, as well as for use as a transportation fuel. One of the key technical barriers to FutureGen deployment is reliable and efficient hydrogen separation technology. Most Hydrogen Transport Membrane (HTM) research currently focuses on separation technology and hydrogen flux characterization. No significant work has been performed on thermo-mechanical properties of HTMs. The objective of the thesis is to understand the structure-property correlation of HTM and to characterize (1) thermo mechanical properties under different reducing environments and thermal cycles (thermal shock), and (2) evaluate the stability of the novel HTM material. A novel HTM cermet bulk sample was characterized for its physical and mechanical properties at both room temperature and at elevated temperature up to 1000°C. Micro-structural properties and residual stresses were evaluated in order to understand the changing mechanism of the microstructure and its effects on the mechanical properties of materials. A correlation of the microstructural and thermo mechanical properties of the HTM system was established for both HTM and the substrate material. Mechanical properties of both selected structural ceramics and the novel HTM cermet bulk sample are affected mainly by porosity and microstructural features, such as grain size and pore size-distribution. The Young's Modulus (E-value) is positively correlated to the flexural strength for materials with similar crystallographic structure. However, for different crystallographic materials, physical properties are independent of mechanical properties. Microstructural properties, particularly, grain size and crystallographic structure, and thermodynamic properties are the main factors affecting the mechanical properties at both room and high temperatures. The HTM cermet behaves more like an elastic material at room temperature and as a ductile material at temperature above 850°C. The oxidation and the plasticity of Pd phase mainly affected the mechanical properties of HTM cermet at high temperature, also as a result of thermal cycling. Residual stress induced in the HTM by thermo cycles also plays a very critical role in defining the thermo-mechanical properties.

  6. Climate change and the northern Russian treeline zone.

    PubMed

    MacDonald, G M; Kremenetski, K V; Beilman, D W

    2008-07-12

    The Russian treeline is a dynamic ecotone typified by steep gradients in summer temperature and regionally variable gradients in albedo and heat flux. The location of the treeline is largely controlled by summer temperatures and growing season length. Temperatures have responded strongly to twentieth-century global warming and will display a magnified response to future warming. Dendroecological studies indicate enhanced conifer recruitment during the twentieth century. However, conifers have not yet recolonized many areas where trees were present during the Medieval Warm period (ca AD 800-1,300) or the Holocene Thermal Maximum (HTM; ca 10,000-3,000 years ago). Reconstruction of tree distributions during the HTM suggests that the future position of the treeline due to global warming may approximate its former Holocene maximum position. An increased dominance of evergreen tree species in the northern Siberian forests may be an important difference between past and future conditions. Based on the slow rates of treeline expansion observed during the twentieth century, the presence of steep climatic gradients associated with the current Arctic coastline and the prevalence of organic soils, it is possible that rates of treeline expansion will be regionally variable and transient forest communities with species abundances different from today's may develop.

  7. Holocene temperature shifts around Greenland: Paleolimnological approaches to quantifying past warmth and documenting its consequences

    NASA Astrophysics Data System (ADS)

    Axford, Y.; Lasher, G. E.; McFarlin, J. M.; Francis, D. R.; Kelly, M. A.; Langdon, P. G.; Levy, L.; Osburn, M. R.; Osterberg, E. C.

    2015-12-01

    Insolation-driven warmth across the Arctic during the early to middle Holocene (the Holocene Thermal Maximum, or HTM) represents a geologically accessible analog for future warming and its impacts. Improved constraints on the magnitude and seasonality of HTM warmth around Greenland's margins can advance the use of paleoclimate data to test and improve climate and ice sheet models. Here we present an overview of our recent efforts to reconstruct climate through the Holocene around the margins of the Greenland Ice Sheet using multiple proxies in lake sediments. We use insect (chironomid) assemblages to derive quantitative estimates of Holocene temperatures at sites with minimal soil and vegetation development near the eastern, northwestern and western margins of the ice sheet. Our chironomid-based temperature reconstructions consistently imply HTM July air temperatures 3 to 4.5 °C warmer than the pre-industrial late Holocene in these sectors of Greenland. The timing of reconstructed peak warmth differs between sites, with onset varying from ~10 ka to ~6.5 ka, but in good agreement with glacial geology and other evidence from each region. Our reconstructed temperature anomalies are larger than those typically inferred from annually-integrated indicators from the ice sheet itself, but comparable to the few other quantitative summer temperature estimates available from beyond the ice sheet on Greenland. Additional records are needed to confirm the magnitude of HTM warmth and to better define its seasonality and spatial pattern. To provide independent constraints on paleotemperatures and to elucidate additional aspects of Holocene paleoclimate, we are also employing oxygen isotopes of chironomid remains and other aquatic organic materials, and molecular organic proxies, in parallel (see Lasher et al. and McFarlin et al., this meeting). Combined with glacial geologic evidence, these multi-proxy records elucidate diverse aspects of HTM climate around Greenland - including temperature, hydroclimate, and the response of Greenland's glaciers to past climate change.

  8. A comprehensive device modelling of perovskite solar cell with inorganic copper iodide as hole transport material

    NASA Astrophysics Data System (ADS)

    Zulqarnain Haider, Syed; Anwar, Hafeez; Wang, Mingqing

    2018-03-01

    Hole transport material (HTM) plays an important role in the efficiency and stability of perovskite solar cells (PSCs). Spiro-MeOTAD, the commonly used HTM, is costly and can be easily degraded by heat and moisture, thus offering hindrance to commercialize PSCs. There is dire need to find an alternate inorganic and stable HTM to exploit PSCs with their maximum capability. In this paper, a comprehensive device simulation is used to study various possible parameters that can influence the performance of perovskite solar cell with CuI as HTM. These include the effect of doping density, defect density and thickness of absorber layer, along with the influence of diffusion length of carriers as well as electron affinity of electron transport layer (ETM) and HTM on the performance of PSCs. In addition, hole mobility and doping density of HTM is also investigated. CuI is a p-type inorganic material with low cost and relatively high stability. It is found that concentration of dopant in absorber layer and HTM, the electron affinity of HTM and ETM affect the performance of solar cell minutely, while cell performance improves greatly with the reduction of defect density. Upon optimization of parameters, power conversion efficiency for this device is found to be 21.32%. The result shows that lead-based PSC with CuI as HTM is an efficient system. Enhancing the stability and reduction of defect density are critical factors for future research. These factors can be improved by better fabrication process and proper encapsulation of solar cell.

  9. Improvement of blood compatibility on polysulfone-polyvinylpyrrolidone blend films as a model membrane of dialyzer by physical adsorption of recombinant soluble human thrombomodulin (ART-123).

    PubMed

    Omichi, Masaaki; Matsusaki, Michiya; Maruyama, Ikuro; Akashi, Mitsuru

    2012-01-01

    ART-123 is a recombinant soluble human thrombomodulin (hTM) with potent anticoagulant activity, and is available for developing antithrombogenic surfaces by immobilization. We focused on improving blood compatibility on the dialyzer surface by the physical adsorption of ART-123 as a safe yet simple method without using chemical reagents. The physical adsorption mechanism and anticoagulant activities of adsorbed hTM on the surface of a polysulfone (PSF) membrane containing polyvinylpyrrolidone (PVP) as a model dialyzer were investigated in detail. The PVP content of the PSF-PVP films was saturated at 20 wt% after immersion in Tris-HCl buffer, even with the addition of over 20 wt% PVP. The surface morphology of the PSF-PVP films was strongly influenced by the PVP content, because PVP covered the outermost surface of the PSF-PVP films. The adsorption speed of hTM slowed dramatically with increasing PVP content up to 10 wt%, but the maximum adsorption amount of hTM onto the PSF-PVP film surface was almost the same, regardless of the PVP content. The PSF-PVP film with the physically adsorbed hTM showed higher protein C activity as compared to the PSF film, it showed excellent blood compatibility due to the protein C activity and the inhibition properties of platelet adhesion. The physical adsorption of hTM can be useful as a safe yet simple method to improve the blood compatibility of a dialyzer surface.

  10. heterogeneous mixture distributions for multi-source extreme rainfall

    NASA Astrophysics Data System (ADS)

    Ouarda, T.; Shin, J.; Lee, T. S.

    2013-12-01

    Mixture distributions have been used to model hydro-meteorological variables showing mixture distributional characteristics, e.g. bimodality. Homogeneous mixture (HOM) distributions (e.g. Normal-Normal and Gumbel-Gumbel) have been traditionally applied to hydro-meteorological variables. However, there is no reason to restrict the mixture distribution as the combination of one identical type. It might be beneficial to characterize the statistical behavior of hydro-meteorological variables from the application of heterogeneous mixture (HTM) distributions such as Normal-Gamma. In the present work, we focus on assessing the suitability of HTM distributions for the frequency analysis of hydro-meteorological variables. In the present work, in order to estimate the parameters of HTM distributions, the meta-heuristic algorithm (Genetic Algorithm) is employed to maximize the likelihood function. In the present study, a number of distributions are compared, including the Gamma-Extreme value type-one (EV1) HTM distribution, the EV1-EV1 HOM distribution, and EV1 distribution. The proposed distribution models are applied to the annual maximum precipitation data in South Korea. The Akaike Information Criterion (AIC), the root mean squared errors (RMSE) and the log-likelihood are used as measures of goodness-of-fit of the tested distributions. Results indicate that the HTM distribution (Gamma-EV1) presents the best fitness. The HTM distribution shows significant improvement in the estimation of quantiles corresponding to the 20-year return period. It is shown that extreme rainfall in the coastal region of South Korea presents strong heterogeneous mixture distributional characteristics. Results indicate that HTM distributions are a good alternative for the frequency analysis of hydro-meteorological variables when disparate statistical characteristics are presented.

  11. Ratiometric and turn-on monitoring for heavy and transition metal ions in aqueous solution with a fluorescent peptide sensor.

    PubMed

    Joshi, Bishnu Prasad; Park, Junwon; Lee, Wan In; Lee, Keun-Hyeung

    2009-05-15

    A novel fluorescent peptide sensor containing tryptophan (donor) and dansyl fluorophore (acceptor) was synthesized for monitoring heavy and transition metal (HTM) ions on the basis of metal ion binding motif (Cys-X-X-X-Cys). The peptide probe successfully exhibited a turn on and ratiometric response for several heavy metal ions such as Hg(2+), Cd(2+), Pb(2+), Zn(2+), and Ag(+) in aqueous solution. The enhancements of emission intensity were achieved in the presence of the HTM ions by fluorescent resonance energy transfer (FRET) and chelation enhanced fluorescence (CHEF) effects. The detection limits of the sensor for Cd(2+), Pb(2+), Zn(2+), and Ag(+) were lower than the EPA's drinking water maximum contaminant levels (MCL). We described the fluorescent enhancement, binding affinity, and detection limit of the peptide probe for HTM ions.

  12. Array Formatting of the Heat-Transfer Method (HTM) for the Detection of Small Organic Molecules by Molecularly Imprinted Polymers

    PubMed Central

    Wackers, Gideon; Vandenryt, Thijs; Cornelis, Peter; Kellens, Evelien; Thoelen, Ronald; De Ceuninck, Ward; Losada-Pérez, Patricia; van Grinsven, Bart; Peeters, Marloes; Wagner, Patrick

    2014-01-01

    In this work we present the first steps towards a molecularly imprinted polymer (MIP)-based biomimetic sensor array for the detection of small organic molecules via the heat-transfer method (HTM). HTM relies on the change in thermal resistance upon binding of the target molecule to the MIP-type receptor. A flow-through sensor cell was developed, which is segmented into four quadrants with a volume of 2.5 μL each, allowing four measurements to be done simultaneously on a single substrate. Verification measurements were conducted, in which all quadrants received a uniform treatment and all four channels exhibited a similar response. Subsequently, measurements were performed in quadrants, which were functionalized with different MIP particles. Each of these quadrants was exposed to the same buffer solution, spiked with different molecules, according to the MIP under analysis. With the flow cell design we could discriminate between similar small organic molecules and observed no significant cross-selectivity. Therefore, the MIP array sensor platform with HTM as a readout technique, has the potential to become a low-cost analysis tool for bioanalytical applications. PMID:24955945

  13. A model of the Greenland ice sheet deglaciation

    NASA Astrophysics Data System (ADS)

    Lecavalier, Benoit

    The goal of this thesis is to improve our understanding of the Greenland ice sheet (GrIS) and how it responds to climate change. This was achieved using ice core records to infer elevation changes of the GrIS during the Holocene (11.7 ka BP to Present). The inferred elevation changes show the response of the ice sheet interior to the Holocene Thermal Maximum (HTM; 9-5 ka BP) when temperatures across Greenland were warmer than present. These ice-core derived thinning curves act as a new set of key constraints on the deglacial history of the GrIS. Furthermore, a calibration was conducted on a three-dimensional thermomechanical ice sheet, glacial isostatic adjustment, and relative sea-level model of GrIS evolution during the most recent deglaciation (21 ka BP to present). The model was data-constrained to a variety of proxy records from paleoclimate archives and present-day observations of ice thickness and extent.

  14. Late Glacial to Holocene paleoenvironmental change on the northwestern Pacific seaboard, Kamchatka Peninsula (Russia)

    NASA Astrophysics Data System (ADS)

    Pendea, Ionel Florin; Ponomareva, Vera; Bourgeois, Joanne; Zubrow, Ezra B. W.; Portnyagin, Maxim; Ponkratova, Irina; Harmsen, Hans; Korosec, Gregory

    2017-02-01

    We used a new sedimentary record from a small kettle wetland to reconstruct the Late Glacial and Holocene vegetation and fire history of the Krutoberegovo-Ust Kamchatsk region in eastern Kamchatka Peninsula (Russia). Pollen and charcoal data suggest that the Late Glacial landscape was dominated by a relatively fire-prone Larix forest-tundra during the Greenland Interstadial complex (GI 1) and a subarctic steppe during the Younger Dryas (GS1). The onset of the Holocene is marked by the reappearance of trees (mainly Alnus incana) within a fern and shrub dominated landscape. The Holocene Thermal Maximum (HTM) features shifting vegetational communities dominated by Alnus shrubs, diverse forb species, and locally abundant aquatic plants. The HTM is further defined by the first appearance of stone birch forests (Betula ermanii) - Kamchatka's most abundant modern tree species. The Late Holocene is marked by shifts in forest dynamics and forest-graminoid ratio and the appearance of new non-arboreal taxa such as bayberry (Myrica) and meadow rue (Filipendula). Kamchatka is one of Earth's most active volcanic regions. During the Late Glacial and Holocene, Kamchatka's volcanoes spread large quantities of tephra over the study region. Thirty-four tephra falls have been identified at the site. The events represented by most of these tephra falls have not left evidence of major impacts on the vegetation although some of the thicker tephras caused expansion of grasses (Poaceae) and, at least in one case, forest die-out and increased fire activity.

  15. Seasonally Distinct Reconstructions of Northern Alaskan Temperature Variability Since the Last Glacial Maximum

    NASA Astrophysics Data System (ADS)

    Longo, W. M.; Crowther, J.; Daniels, W.; Russell, J. M.; Giblin, A. E.; Morrill, C.; Zhang, X.; Wang, X.; Huang, Y.

    2015-12-01

    Paleoclimate reconstructions have provided little consensus on how continental temperatures in Eastern Beringia changed from the Last Glacial Maximum (LGM) to the present. Reconstructions show regional differences in LGM severity, the timing of deglacial warming, and Holocene temperature variability. Currently, arctic temperatures are increasing at the fastest rates on the planet, highlighting the need to identify the sensitivities of arctic systems to various climate forcings. This cannot be done without resolving the complex climate history of Eastern Beringia. Here, we present two new organic geochemical temperature reconstructions from Lake E5, north central Alaska that span the LGM, last glacial termination and Holocene. The proxies (alkenones and brGDGTs) record seasonally distinct temperatures, allowing for the attribution of different forcings to each proxy. The alkenone-based UK37 reconstruction records spring/early summer lake temperatures and indicates a 4 oC abrupt warming at 13.1 ka and a relatively warm late Holocene, which peaks at 2.4 ka and exhibits a cooling trend from 2.4 to 0.1 ka. The brGDGT reconstruction is calibrated to mean annual air temperature and interpreted here as exhibiting a strong warm season bias. BrGDGTs show an abrupt 4.5 oC warming at 14 ka, and show evidence for an early Holocene Thermal Maximum (HTM), which cools by 3 oC after 8.4 ka. Because UK37 temperatures do not exhibit an early HTM, we hypothesize that summer insolation had a minimal effect on spring/early summer lake temperatures. Instead, the UK37 reconstruction agrees with sea ice and sea surface temperature reconstructions from the Beaufort and Chukchi Seas and northeast Pacific Ocean. We hypothesize that forcings associated with sea ice concentration and changes in atmospheric circulation had stronger affects on spring/early summer lake temperatures and we present modern observational data in support of this hypothesis. By contrast, the summer-biased brGDGT reconstruction suggests a strong and relatively direct temperature response to summer insolation forcing. Together, these records suggest that both internal and external forcings significantly affected LGM to present temperature variability in Eastern Beringia, with different seasonal biases.

  16. Holocene evolution of aquatic bioactivity and terrestrial erosion inferred from Skorarvatn, Vestfirðir, Iceland: Where is the Little Ice Age?

    NASA Astrophysics Data System (ADS)

    Harning, D.; Geirsdottir, A.; Miller, G. H.

    2016-12-01

    Icelandic lake sediment is well suited to provide high-resolution, well-dated continuous archives of North Atlantic climate variability. We provide new insight into the Holocene climate evolution of Vestfirðir, NW Iceland, from a 10.3 ka multi-proxy lake sediment record from non-glacial lake Skorarvatn. Age control is derived from a combination of tephrochronology and 14C-dated macrofossils. Sediment samples were analyzed for both physical (MS, density) and biological (TC, TN, δ13C, δ15N, C/N, BSi) climate proxies, providing a sub-centennial record of aquatic bioactivity and terrestrial landscape stability, and hence, summer temperature. The lake basin was ice free by at least 10.3 ka yet the waning Icelandic Ice Sheet persisted in the catchment until 9.3 ka. The local Holocene Thermal Maximum (HTM), inferred from maximum aquatic bioactivity, spans 8.9 to 7.2 ka but was interrupted by significant cooling at 8.2 ka. In accordance with other Icelandic climate records documenting progressively cooler summers following the HTM, our record reveals reduced aquatic productivity and elevated terrestrial erosion toward the present. Superimposed on this 1st order trend are abrupt episodes of cooling, inferred from low aquatic bioactivity and/or enhanced landscape instability, at 6.4, 4.2, 3, 2.5 and 1.5 ka. Surprisingly, there is no clear indication of the Little Ice Age (LIA) in our record despite evidence for the local ice cap, Drangajökull, attaining maximum areal coverage at this time. Persistently low temperatures inferred from reduced aquatic productivity plateau at 2 ka whereas increasing terrestrial erosion ceases at 1 ka. Lack of a catchment erosion signal during the LIA may be the result of depleted catchment soils and/or perennially frozen ground preventing the mobilization of soil and vegetation. With the exception of the LIA, Skorarvatn's qualitative summer temperature record corresponds closely to summer sea surface temperature and sea ice records on the North Iceland Shelf, supporting previous evidence that the North Atlantic imparts a significant impact of the state of Iceland's terrestrial climate.

  17. Modification of CuI based Hole Transport Material for Solid State DSSC Application

    NASA Astrophysics Data System (ADS)

    Hanif, Q. A.; Ramelan, A. H.; Saputri, L. N. M. Z.; Wahyuningsih, S.

    2018-03-01

    Modification of Hole Transport Material (HTM) with addition of tetramethylethylenediamine (TMED) and ammonium thiocyanate (NH4SCN) have been conducted. Copper Iodide (CuI) were used as the main component of HTM. Several volume variations of TMED (0.1; 0.2; and 0.4 mL) was added into 0.05 M CuI solutions. While TMED: NH4SCN ratio were 1:1,1:2,2:1 also introduced to the dissolved CuI. Optical properties of these materials showed the band gap energy value ranging from 2.38 to 3.79 eV. The conductivity of HTM has been measured and showed the maximum value in CuI added with 0.4 mL TMED = 0.29 S m-1, and ratio of TMED: NH4SCN=2:1 added into CuI = 0.39 S m-1, these value were increased compared to the CuI conductivity itself (0.26 S m-1). The effect of this modification towards SS DSSC efficiency also has been monitored. The SS DSSC construction consists of TiO2 nanorods sensitized by N3, HTM, and platinum as a counter electrode. The performance of SS DSSC showed rising efficiency as follows TiO2|N3|CuI

  18. Rock-slope failure activity and geological crises in western Norway

    NASA Astrophysics Data System (ADS)

    Hilger, Paula; Hermanns, Reginald L.; Myhra, Kristin S.; Gosse, John C.; Ivy-Ochs, Susan; Etzelmüller, Bernd

    2017-04-01

    In Norway a compilation of terrestrial cosmogenic nuclide (TCN) ages of rock-avalanche deposits suggests a close link of rock-slope failures related to deglaciation. Although ages spread over several thousand years at the end of the Late Pleistocene, 50% of all documented events occurred within 1000 years after deglaciation. It is therefore likely that debuttressing triggered most of the events. The same data set suggests that 25% of the events occurred during a period stretching until the Holocene thermal maximum (HTM). These events might be interpreted as possible reactions to additional factors such as the thawing of high-altitude permafrost. An example of a geological crisis following deglaciation and before the HTM are seven lobate rock-avalanche deposits mapped under the slope of the Vora mountain (1450 m asl.) in the Nordfjord area of western Norway. Three events of this rock-slope failure cluster date within a short time period of 2000 years, where modelling studies indicate that high-altitude permafrost was present. After the HTM rock-slope failures are distributed temporally and spatially rather evenly throughout the Holocene and western Norway. But there are two independent local clusters with frequent rock slides during a short time span. (1) At the active Mannen rock-slope instability several rock-avalanche and rockslide deposits were mapped on the valley bottom. Stratigraphic relations combined with TCN dating suggest that at least one event occurred when the valley bottom was below the marine limit. TCN ages of further four lobes cluster around 5.2 ka BP, which does not coincide with any other rock-avalanche occurrence in the region. The top of the north facing 1295 m high unstable slope concurs with the currently estimated permafrost boundary. Preliminary TCN ages of the sliding surface indicate that larger parts of the mountain did not become active until the climate maximum. It is likely that due to structural complexity not allowing for any easy kinematic failure process, it required several thousand years of rock-slope deformation prior to the multiple failures. (2) The youngest independent rock-avalanche cluster is historic with 5 rock avalanches sourcing from Ramnefjellet in 1905, 1936 (three events), and 1950 entering into Loen lake in western Norway. Subsequent displacement waves killed 61 people in 1905 and 73 people due to the first failure in 1936. The back scarp does not exceed 850 m elevation and lies hence below the present day and Little Ice Age permafrost limit. It is therefore unlikely that permafrost dynamics contribute to this sequence of rock-slope failures. Local clusters or a geological crisis by rock-slope failures seems to be related to different main factors, such as glacial debutressing, influence of ground thermal regime changes (Mannen) and probably more disconnected to major climate variability (Loen). For an integrated risk management it is therefore important to understand that large rock-slope failures do not necessarily have to occur in single events but can occur over several decades or centuries and thus complicate severely land use management after catastrophic events.

  19. Improved Gas Metal Arc Welding Multi-Physics Process Model and Its Application to MIL A46100 Armor-Grade Steel Butt-welds

    DTIC Science & Technology

    2014-01-01

    expansion a 1/K 11e–6-12e–6 Specific heat C p J/kg K 440-520 Thermal conductivity k W/m K 35-50 Heat transfer coefficient h W/m2 K 45 Sink temperature...filler-metal consumable electrode to the weld; third, prediction of the temporal evolution and the spatial distribution of thermal and mechanical...the thermal The current issue and full text archive of this journal is available at www.emeraldinsight.com/1573-6105.htm Received 20 May 2013 Revised 13

  20. Elastic Modulus Determination of Normal and Glaucomatous Human Trabecular Meshwork

    PubMed Central

    Last, Julie A.; Pan, Tingrui; Ding, Yuzhe; Reilly, Christopher M.; Keller, Kate; Acott, Ted S.; Fautsch, Michael P.; Murphy, Christopher J.; Russell, Paul

    2011-01-01

    Purpose. Elevated intraocular pressure (IOP) is a risk factor for glaucoma. The principal outflow pathway for aqueous humor in the human eye is through the trabecular meshwork (HTM) and Schlemm's canal (SC). The junction between the HTM and SC is thought to have a significant role in the regulation of IOP. A possible mechanism for the increased resistance to flow in glaucomatous eyes is an increase in stiffness (increased elastic modulus) of the HTM. In this study, the stiffness of the HTM in normal and glaucomatous tissue was compared, and a mathematical model was developed to predict the impact of changes in stiffness of the juxtacanalicular layer of HTM on flow dynamics through this region. Methods. Atomic force microscopy (AFM) was used to measure the elastic modulus of normal and glaucomatous HTM. According to these results, a model was developed that simulated the juxtacanalicular layer of the HTM as a flexible membrane with embedded pores. Results. The mean elastic modulus increased substantially in the glaucomatous HTM (mean = 80.8 kPa) compared with that in the normal HTM (mean = 4.0 kPa). Regional variation was identified across the glaucomatous HTM, possibly corresponding to the disease state. Mathematical modeling suggested an increased flow resistance with increasing HTM modulus. Conclusions. The data indicate that the stiffness of glaucomatous HTM is significantly increased compared with that of normal HTM. Modeling exercises support substantial impairment in outflow facility with increased HTM stiffness. Alterations in the biophysical attributes of the HTM may participate directly in the onset and progression of glaucoma. PMID:21220561

  1. Climate-vegetation-fire interactions and their impact on long-term carbon dynamics in a boreal peatland landscape in northern Manitoba, Canada

    NASA Astrophysics Data System (ADS)

    Camill, Philip; Barry, Ann; Williams, Evie; Andreassi, Christian; Limmer, Jacob; Solick, Donald

    2009-12-01

    Climate warming may increase the size and frequency of fires in the boreal biome, possibly causing greater carbon release that amplifies warming. However, in peatlands, vegetation change may also control long-term fire and carbon accumulation, confounding simple relationships between climate, fire, and carbon accumulation. Using 17 peat cores dating to 8000 cal years B.P. from northern Manitoba, Canada, we addressed the following questions: (1) Do past climate changes correlate with shifts in peatland vegetation? (2) What is the relationship between peatland vegetation and fire severity? (3) What is the mean return interval for boreal peat fires, and how does it change across fires of different severities? (4) How does fire severity affect carbon accumulation rates? (5) Do fire and long-term carbon accumulation change directly in response to climate or indirectly though climate-driven changes in vegetation? We measured carbon accumulation rates, fire severity, and return intervals using macroscopic charcoal and changes in vegetation using macrofossils. Climate and vegetation changes covaried, with shifts from wetter fen to drier, forested bog communities during the Holocene Thermal Maximum (HTM). Fires became more severe following the shift to forested bogs, with fire severity peaking after 4000 cal years B.P. rather than during the HTM. Rising fire severity, in turn, was correlated with a significant decrease in carbon accumulation from ˜6000 to 2000 cal years B.P. The Medieval Warm Period and Little Ice Age affected vegetation composition and permafrost, further impacting fire and carbon accumulation. Our results indicate that long-term changes in fire and carbon dynamics are mediated by climate-driven changes in vegetation.

  2. Evaluation of cleaning and disinfection performance of automatic washer disinfectors machines in programs presenting different cycle times and temperatures.

    PubMed

    Bergo, Maria do Carmo Noronha Cominato

    2006-01-01

    Thermal washer-disinfectors represent a technology that brought about great advantages such as, establishment of protocols, standard operating procedures, reduction in occupational risk of a biological and environmental nature. The efficacy of the cleaning and disinfection obtained by automatic washer disinfectors machines in running programs with different times and temperatures determined by the different official agencies was validated according to recommendations from ISO Standards 15883-1/1999 and HTM2030 (NHS Estates, 1997) for the determining of the Minimum Lethality and DAL both theoretically and through the use with thermocouples. In order to determine the cleaning efficacy, the Soil Test, Biotrace Pro-tect and the Protein Test Kit were used. The procedure to verify the CFU count of viable microorganisms was performed before and after the thermal disinfection. This article shows that the results are in compliance with the ISO and HTM Standards. The validation steps confirmed the high efficacy level of the Medical Washer-Disinfectors. This protocol enabled the evaluation of the procedure based on evidence supported by scientific research, aiming at the support of the Supply Center multi-professional personnel with information and the possibility of developing further research.

  3. Zinc Absorption from Milk Is Affected by Dilution but Not by Thermal Processing, and Milk Enhances Absorption of Zinc from High-Phytate Rice in Young Dutch Women.

    PubMed

    Talsma, Elise F; Moretti, Diego; Ly, Sou Chheng; Dekkers, Renske; van den Heuvel, Ellen Ghm; Fitri, Aditia; Boelsma, Esther; Stomph, Tjeerd Jan; Zeder, Christophe; Melse-Boonstra, Alida

    2017-06-01

    Background: Milk has been suggested to increase zinc absorption. The effect of processing and the ability of milk to enhance zinc absorption from other foods has not been measured directly in humans. Objective: We aimed to assess zinc absorption from 1 ) milk undergoing various processing and preparatory steps and 2 ) from intrinsically labeled high-phytate rice consumed with milk or water. Methods: Two randomized crossover studies were conducted in healthy young women [age:18-25 y; body mass index (in kg/m 2 ): 20-25]: 1 ) a milk study ( n = 19) comparing the consumption of 800 mL full-fat ultra-high temperature (UHT) milk [heat-treated milk (HTM)], full-fat UHT milk diluted 1:1 with water [heat-treated milk and water (MW)], water, or unprocessed (raw) milk (UM), each extrinsically labeled with 67 Zn, and 2 ) a rice study ( n = 18) comparing the consumption of 90 g intrinsically 67 Zn-labeled rice with 600 mL of water [rice and water (RW)] or full-fat UHT milk [rice and milk (RM)]. The fractional absorption of zinc (FAZ) was measured with the double-isotope tracer ratio method. In vitro, we assessed zinc extraction from rice blended into water, UM, or HTM with or without phytate. Results: FAZ from HTM was 25.5% (95% CI: 21.6%, 29.4%) and was not different from UM (27.8%; 95% CI: 24.2%, 31.4%). FAZ from water was higher (72.3%; 95% CI: 68.7%, 75.9%), whereas FAZ from MW was lower (19.7%; 95% CI: 17.5%, 21.9%) than HTM and UM (both P < 0.01). FAZ from RM (20.7%; 95% CI: 18.8%, 22.7%) was significantly higher than from RW (12.8%; 95% CI: 10.8%, 14.6%; P < 0.01). In vitro, HTM and UM showed several orders of magnitude higher extraction of zinc from rice with HTM than from rice with water at various phytate concentrations. Conclusions: Milk enhanced human FAZ from high-phytate rice by 62% compared with water. Diluting milk with water decreases its absorption-enhancing proprieties, whereas UHT processing does not. This trial was registered at the Dutch trial registry as NTR4267 (http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=4267). © 2017 American Society for Nutrition.

  4. Fluidized-bed technology enabling the integration of high temperature solar receiver CSP systems with steam and advanced power cycles

    DOE PAGES

    Sakadjian, B.; Hu, S.; Maryamchik, M.; ...

    2015-06-05

    Solar Particle Receivers (SPR) are under development to drive concentrating solar plants (CSP) towards higher operating temperatures to support higher efficiency power conversion cycles. The novel high temperature SPR-based CSP system uses solid particles as the heat transfer medium (HTM) in place of the more conventional fluids such as molten salt or steam used in current state-of-the-art CSP plants. The solar particle receiver (SPR) is designed to heat the HTM to temperatures of 800 °C or higher which is well above the operating temperatures of nitrate-based molten salt thermal energy storage (TES) systems. The solid particles also help overcome somemore » of the other challenges associated with molten salt-based systems such as freezing, instability and degradation. The higher operating temperatures and use of low cost HTM and higher efficiency power cycles are geared towards reducing costs associated with CSP systems. This paper describes the SPR-based CSP system with a focus on the fluidized-bed (FB) heat exchanger and its integration with various power cycles. Furthermore, the SPR technology provides a potential pathway to achieving the levelized cost of electricity (LCOE) target of $0.06/kWh that has been set by the U.S. Department of Energy's SunShot initiative.« less

  5. Fluidized-bed technology enabling the integration of high temperature solar receiver CSP systems with steam and advanced power cycles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sakadjian, B.; Hu, S.; Maryamchik, M.

    Solar Particle Receivers (SPR) are under development to drive concentrating solar plants (CSP) towards higher operating temperatures to support higher efficiency power conversion cycles. The novel high temperature SPR-based CSP system uses solid particles as the heat transfer medium (HTM) in place of the more conventional fluids such as molten salt or steam used in current state-of-the-art CSP plants. The solar particle receiver (SPR) is designed to heat the HTM to temperatures of 800 °C or higher which is well above the operating temperatures of nitrate-based molten salt thermal energy storage (TES) systems. The solid particles also help overcome somemore » of the other challenges associated with molten salt-based systems such as freezing, instability and degradation. The higher operating temperatures and use of low cost HTM and higher efficiency power cycles are geared towards reducing costs associated with CSP systems. This paper describes the SPR-based CSP system with a focus on the fluidized-bed (FB) heat exchanger and its integration with various power cycles. Furthermore, the SPR technology provides a potential pathway to achieving the levelized cost of electricity (LCOE) target of $0.06/kWh that has been set by the U.S. Department of Energy's SunShot initiative.« less

  6. Multidecadal oscillations in past Baltic Sea hypoxia: the role of sedimentary iron-phosphorus feedbacks

    NASA Astrophysics Data System (ADS)

    Jilbert, Tom; Gustafsson, Bo G.; Veldhuijzen, Simon; Reed, Daniel C.; van Helmond, Niels A. G. M.; Slomp, Caroline P.

    2017-04-01

    The Baltic Sea currently experiences widespread deep-water hypoxia, a consequence of both anthropogenic nutrient loading and the natural susceptibility of its stratified water column to oxygen depletion. Sediment core records show that hypoxia was also prevalent in the Baltic during the Holocene Thermal Maximum (HTM) and Medieval Climate Anomaly (MCA). Sedimentary iron (Fe) and phosphorus (P) dynamics are known to play a key role in determining the intensity of Baltic Sea hypoxia through time. Rapid intensification of hypoxia at the onset of past centennial-scale hypoxic events during the HTM and MCA has been explained by release of P from sedimentary Fe oxides, leading to enhanced primary productivity and deep water oxygen consumption (Jilbert and Slomp, 2013). Similarly, rapid relief from hypoxia at the termination of these events reflects efficient trapping of P by Fe oxides as oxic conditions expand. Here we show that within past hypoxic events in the Baltic Sea, hypoxia intensity also varied continuously on multidecadal timescales. We observe persistent oscillations in new high-resolution records of sediment redox proxies derived from Laser Ablation (LA) ICP-MS analysis. In-phase multidecadal oscillations in molybdenum/aluminium (Mo/Al), bromine/phosphorus (Br/P) and Fe/Al indicate coupling between redox conditions, the flux of carbon to the seafloor, and mobilization of Fe in shelf areas, respectively. Using a simple box model, we show that instabilities in the response of sedimentary P release to changing oxygen concentrations and carbon flux were the likely cause of the observed oscillations. When prescribing a non-linear relationship between P release, oxygen concentration and carbon flux, and forcing the model with external P loadings typical of the HTM and MCA, the simulated time-series of deep-water oxygen show pronounced oscillations similar to those observed in the sediment records. However, when external P loads typical of the modern anthropogenic interval are used in the simulations, these instabilities are overcome and deep water conditions remain permanently hypoxic. The results suggest that complete recovery from hypoxia in the modern Baltic Sea will require a substantial further decline in external nutrient loading. Reference: Jilbert, T. and Slomp, C.P., Rapid high-amplitude variability in Baltic Sea hypoxia during the Holocene. Geology 41 (11), 1183-1186, 2013.

  7. Human trabecular meshwork cells exhibit several characteristics of, but are distinct from, adipose-derived mesenchymal stem cells.

    PubMed

    Morgan, Joshua T; Wood, Joshua A; Walker, Naomi J; Raghunathan, Vijay Krishna; Borjesson, Dori L; Murphy, Christopher J; Russell, Paul

    2014-01-01

    To support the growing promise of regenerative medicine in glaucoma, we characterized the similarities and differences between human trabecular meshwork (HTM) cells and human mesenchymal stem cells (hMSCs). HTM cells and hMSCs were phenotypically characterized by flow cytometry. Using quantitative polymerase chain reaction, the expression of myoc, angptl7, sox2, pou5f1, and notch1 was determined in both cell types with and without dexamethasone (Dex). Immunosuppressive behavior of HTM cells and hMSCs was determined using T cells activated with phytohemagglutinin. T-cell proliferation was determined using BrdU incorporation and flow cytometry. Multipotency of HTM cells and hMSCs was determined using adipogenic and osteogenic differentiation media as well as aqueous humor (AH). Alpha-smooth muscle actin (αSMA) expression was determined in HTM cells, hMSCs, and HTM tissue. Phenotypically, HTM and hMSCs expressed CD73, CD90, CD105, and CD146 but not CD31, CD34, and CD45 and similar sox2, pou5f1, and notch1 expression. Both cell types suppressed T-cell proliferation. However, HTM cells, but not hMSCs, upregulated myoc and angptl7 in response to Dex. Additionally, HTM cells did not differentiate into adipocytes or osteocytes. Culture of hMSCs in 20%, but not 100%, AH potently induced alkaline phosphatase activity. HTM cells in culture possessed uniformly strong expression of αSMA, which contrasted with the limited expression in hMSCs and spatially discrete expression in HTM tissue. HTM cells possess a number of important similarities with hMSCs but lack multipotency, one of the defining characteristics of stem cells. Further work is needed to explore the molecular mechanisms and functional implications underlying the phenotypic similarities.

  8. Human Trabecular Meshwork Cells Exhibit Several Characteristics of, but Are Distinct from, Adipose-Derived Mesenchymal Stem Cells

    PubMed Central

    Morgan, Joshua T.; Wood, Joshua A.; Walker, Naomi J.; Raghunathan, Vijay Krishna; Borjesson, Dori L.; Murphy, Christopher J.

    2014-01-01

    Abstract Purpose: To support the growing promise of regenerative medicine in glaucoma, we characterized the similarities and differences between human trabecular meshwork (HTM) cells and human mesenchymal stem cells (hMSCs). Methods: HTM cells and hMSCs were phenotypically characterized by flow cytometry. Using quantitative polymerase chain reaction, the expression of myoc, angptl7, sox2, pou5f1, and notch1 was determined in both cell types with and without dexamethasone (Dex). Immunosuppressive behavior of HTM cells and hMSCs was determined using T cells activated with phytohemagglutinin. T-cell proliferation was determined using BrdU incorporation and flow cytometry. Multipotency of HTM cells and hMSCs was determined using adipogenic and osteogenic differentiation media as well as aqueous humor (AH). Alpha-smooth muscle actin (αSMA) expression was determined in HTM cells, hMSCs, and HTM tissue. Results: Phenotypically, HTM and hMSCs expressed CD73, CD90, CD105, and CD146 but not CD31, CD34, and CD45 and similar sox2, pou5f1, and notch1 expression. Both cell types suppressed T-cell proliferation. However, HTM cells, but not hMSCs, upregulated myoc and angptl7 in response to Dex. Additionally, HTM cells did not differentiate into adipocytes or osteocytes. Culture of hMSCs in 20%, but not 100%, AH potently induced alkaline phosphatase activity. HTM cells in culture possessed uniformly strong expression of αSMA, which contrasted with the limited expression in hMSCs and spatially discrete expression in HTM tissue. Conclusions: HTM cells possess a number of important similarities with hMSCs but lack multipotency, one of the defining characteristics of stem cells. Further work is needed to explore the molecular mechanisms and functional implications underlying the phenotypic similarities. PMID:24456002

  9. Efficient Carbon-Based CsPbBr3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

    NASA Astrophysics Data System (ADS)

    Liu, Zhiyong; Sun, Bo; Liu, Xingyue; Han, Jinghui; Ye, Haibo; Shi, Tielin; Tang, Zirong; Liao, Guanglan

    2018-06-01

    Metal halide perovskite solar cells (PSCs) have attracted extensive research interest for next-generation solution-processed photovoltaic devices because of their high solar-to-electric power conversion efficiency (PCE) and low fabrication cost. Although the world's best PSC successfully achieves a considerable PCE of over 20% within a very limited timeframe after intensive efforts, the stability, high cost, and up-scaling of PSCs still remain issues. Recently, inorganic perovskite material, CsPbBr3, is emerging as a promising photo-sensitizer with excellent durability and thermal stability, but the efficiency is still embarrassing. In this work, we intend to address these issues by exploiting CsPbBr3 as light absorber, accompanied by using Cu-phthalocyanine (CuPc) as hole transport material (HTM) and carbon as counter electrode. The optimal device acquires a decent PCE of 6.21%, over 60% higher than those of the HTM-free devices. The systematic characterization and analysis reveal a more effective charge transfer process and a suppressed charge recombination in PSCs after introducing CuPc as hole transfer layer. More importantly, our devices exhibit an outstanding durability and a promising thermal stability, making it rather meaningful in future fabrication and application of PSCs.[Figure not available: see fulltext.

  10. The Next Linear Collider Program

    Science.gov Websites

    /graphics.htm Snowmass 2001 http://snowmass2001.org/ Electrical Systems Modulators http://www -project.slac.stanford.edu/lc/local/electrical/e_home.htm DC Magnet Power http://www-project.slac.stanford.edu/lc/local /electrical/e_home.htm Global Systems http://www-project.slac.stanford.edu/lc/local/electrical/e_home.htm

  11. Modelling and optimization of transient processes in line focusing power plants with single-phase heat transfer medium

    NASA Astrophysics Data System (ADS)

    Noureldin, K.; González-Escalada, L. M.; Hirsch, T.; Nouri, B.; Pitz-Paal, R.

    2016-05-01

    A large number of commercial and research line focusing solar power plants are in operation and under development. Such plants include parabolic trough collectors (PTC) or linear Fresnel using thermal oil or molten salt as the heat transfer medium (HTM). However, the continuously varying and dynamic solar condition represent a big challenge for the plant control in order to optimize its power production and to keep the operation safe. A better understanding of the behaviour of such power plants under transient conditions will help reduce defocusing instances, improve field control, and hence, increase the energy yield and confidence in this new technology. Computational methods are very powerful and cost-effective tools to gain such understanding. However, most simulation models described in literature assume equal mass flow distributions among the parallel loops in the field or totally decouple the flow and thermal conditions. In this paper, a new numerical model to simulate a whole solar field with single-phase HTM is described. The proposed model consists of a hydraulic part and a thermal part that are coupled to account for the effect of the thermal condition of the field on the flow distribution among the parallel loops. The model is specifically designed for large line-focusing solar fields offering a high degree of flexibility in terms of layout, condition of the mirrors, and spatially resolved DNI data. Moreover, the model results have been compared to other simulation tools, as well as experimental and plant data, and the results show very good agreement. The model can provide more precise data to the control algorithms to improve the plant control. In addition, short-term and accurate spatially discretized DNI forecasts can be used as input to predict the field behaviour in-advance. In this paper, the hydraulic and thermal parts, as well as the coupling procedure, are described and some validation results and results of simulating an example field are shown.

  12. Investigation of mixed-host organic light emitting diodes

    NASA Astrophysics Data System (ADS)

    Yeh Yee, Kee

    One of the limiting factors to the OLED stability or lifetime is the charge buildup at the bilayer heterojunction (HJ) between the hole transport layer (HTL) and electron transport layer (ETL). In recent years, this abrupt interface has been moderated by mixing HTL and ETL to form a single mixed-host, light emitting layer. For uniformly mixed-host (UM) OLED, the device lifetime and also the efficiency were improved due to the spatial broadening of the recombination zone. Similar device architectures, such as the step-wise graded mixed-host (SGM-OLED) and the continuously graded mixed-host (CGM-OLED) have also been implemented by a number of researchers. In this work, a premix of hole transport material (HTM) and electron transport material (ETM), namely TPD and Alq, is prepared for one-step thermal evaporation of the mixed-host light emitting layer (EML). Depending on the evaporation rate, the CGM-OLEDs with different concentration profiles of HTM and ETM in the EML are obtained, which are inversely proportional to each other.

  13. Holocene and latest Pleistocene climate and glacier fluctuations in Iceland

    NASA Astrophysics Data System (ADS)

    Geirsdóttir, Áslaug; Miller, Gifford H.; Axford, Yarrow; Ólafsdóttir, Sædís

    2009-10-01

    Multiproxy climate records from Iceland document complex changes in terrestrial climate and glacier fluctuations through the Holocene, revealing some coherent patterns of change as well as significant spatial variability. Most studies on the Last Glacial Maximum and subsequent deglaciation reveal a dynamic Iceland Ice Sheet (IIS) that responded abruptly to changes in ocean currents and sea level. The IIS broke up catastrophically around 15 ka as the Polar Front migrated northward and sea level rose. Indications of regional advance or halt of the glaciers are seen in late Alleröd/early Younger Dryas time and again in PreBoreal time. Due to the apparent rise of relative sea level in Iceland during this time, most sites contain evidence for fluctuating, tidewater glacier termini occupying paleo fjords and bays. The time between the end of the Younger Dryas and the Preboreal was characterized by repeated jökulhlaups that eroded glacial deposits. By 10.3 ka, the main ice sheet was in rapid retreat across the highlands of Iceland. The Holocene thermal maximum (HTM) was reached after 8 ka with land temperatures estimated to be 3 °C higher than the 1961-1990 reference, and net precipitation similar to modern. Such temperatures imply largely ice-free conditions across Iceland in the early to mid-Holocene. Several marine and lacustrine sediment climate proxies record substantial summer temperature depression between 8.5 and 8 ka, but no moraines have been detected from that time. Termination of the HTM and onset of Neoglacial cooling took place sometime after 6 ka with increased glacier activity between 4.5 and 4.0 ka, intensifying between 3.0 and 2.5 ka. Although a distinct warming during the Medieval Warm Period is not dramatically apparent in Icelandic records, the interval from ca AD 0 to 1200 is commonly characterized by relative stability with slow rates of change. The literature most commonly describes Little Ice Age moraines (ca AD 1250-1900) as representing the most extensive ice margins since early Holocene deglaciation, with temperature depressions of 1-2 °C compared to the AD 1961-1990 average. Steep north-south and west-east temperature gradients are reconstructed in the Holocene records of Iceland, suggesting a strong maritime influence on the terrestrial climate of Iceland.

  14. Lack of P4H-TM in mice results in age-related retinal and renal alterations.

    PubMed

    Leinonen, Henri; Rossi, Maarit; Salo, Antti M; Tiainen, Päivi; Hyvärinen, Jaana; Pitkänen, Marja; Sormunen, Raija; Miinalainen, Ilkka; Zhang, Chi; Soininen, Raija; Kivirikko, Kari I; Koskelainen, Ari; Tanila, Heikki; Myllyharju, Johanna; Koivunen, Peppi

    2016-09-01

    Age-related macular degeneration (AMD), affecting the retinal pigment epithelium (RPE), is the leading cause of blindness in middle-aged and older people in developed countries. Genetic and environmental risk factors have been identified, but no effective cure exists. Using a mouse model we show that a transmembrane prolyl 4-hydroxylase (P4H-TM), which participates in the oxygen-dependent regulation of the hypoxia-inducible factor (HIF), is a potential novel candidate gene for AMD. We show that P4h-tm had its highest expression levels in the mouse RPE and brain, heart, lung, skeletal muscle and kidney. P4h-tm -/- mice were fertile and had a normal life span. Lack of P4h-tm stabilized HIF-1α in cortical neurons under normoxia, while in hypoxia it increased the expression of certain HIF target genes in tissues with high endogenous P4h-tm expression levels more than in wild-type mice. Renal erythropoietin levels increased in P4h-tm -/- mice with aging, but the resulting ∼2-fold increase in erythropoietin serum levels did not lead to erythrocytosis. Instead, accumulation of lipid-containing lamellar bodies in renal tubuli was detected in P4h-tm -/- mice with aging, resulting in inflammation and fibrosis, and later glomerular sclerosis and albuminuria. Lack of P4h-tm was associated with retinal thinning, rosette-like infoldings and drusen-like structure accumulation in RPE with aging, as is characteristic of AMD. Photoreceptor recycling was compromised, and electroretinograms revealed functional impairment of the cone pathway in adult P4h-tm -/- mice and cone and rod deficiency in middle-aged mice. P4H-TM is therefore imperative for normal vision, and potentially a novel candidate for age-induced diseases, such as AMD. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  15. Early Deglaciation of Drangajökull, Vestfirðir, Iceland: Smaller than Present by 9.2 ka

    NASA Astrophysics Data System (ADS)

    Harning, D.; Geirsdottir, A.; Miller, G. H.; Zalzal, K.

    2016-12-01

    The Holocene histories of Iceland's largest ice caps suggest rapid early Holocene deglaciation and disappearance by 9 ka, other than possible small remnants of Vatnajökull. The least documented is Drangajökull, Vestfirðir, NW Iceland, where our team has been working since 2010. A recent study claims Drangajökull behaved differently than the other Iceland ice caps, deglaciating much later, and persisting through the Holocene Thermal Maximum (HTM). We test this postulate through a suite of sediment cores from threshold lakes both proximal and distal to the ice cap's contemporary margin. Distal lakes document rapid early Holocene deglaciation across the southern highland plateau, with the northern margin of the ice cap reaching a size comparable to Drangajökull's contemporary limit by 10.3 ka. A proximal lake to the north records a transient readvance at 9.6 ka, likely in association with meltwater pulses from the disintegrating Laurentide Ice Sheet (LIS). Two other southeastern proximal lakes, whose catchments extend well beneath the modern ice cap, demonstrate that Drangajökull was already smaller than present before 9.2 ka. Supporting evidence for local early Holocene warmth is derived from biological summer temperature proxies in a lake record, with age control (tephra/14C) demonstrating continuous sediment accumulation from 10.3 ka to present. Peak warmth (HTM) inferred from elevated algal productivity occurred between 8.9 and 7.2 ka. The record of terrestrial warmth closely aligns with regional SST and precipitation records that together with lake sediment characteristics provide firm evidence that Drangajökull responded similarly to Iceland's other large ice caps. Drangajökull was smaller than its contemporary margin before 9.2 ka, and likely disappeared entirely during the warmer and drier summers between 9 and 7 ka, reforming in the Late Holocene.

  16. A deglacial and Holocene record of climate variability in south-central Alaska from stable oxygen isotopes and plant macrofossils in peat

    USGS Publications Warehouse

    Jones, Miriam C.; Wooller, Matthew J.; Peteet, Dorothy M.

    2014-01-01

    We used stable oxygen isotopes derived from bulk peat (δ18OTOM), in conjunction with plant macrofossils and previously published carbon accumulation records, in a ∼14,500 cal yr BP peat core (HT Fen) from the Kenai lowlands in south-central Alaska to reconstruct the climate history of the area. We find that patterns are broadly consistent with those from lacustrine records across the region, and agree with the interpretation that major shifts in δ18OTOM values indicate changes in strength and position of the Aleutian Low (AL), a semi-permanent low-pressure cell that delivers winter moisture to the region. We find decreased strength or a more westerly position of the AL (relatively higher δ18OTOM values) during the Bølling-Allerød, Holocene Thermal Maximum (HTM), and late Holocene, which also correspond to warmer climate regimes. These intervals coincide with greater peat preservation and enhanced carbon (C) accumulation rates at the HT Fen and with peatland expansion across Alaska. The HTM in particular may have experienced greater summer precipitation as a result of an enhanced Pacific subtropical high, a pattern consistent with modern δ18O values for summer precipitation. The combined warm summer temperatures and greater summer precipitation helped promote the observed rapid peat accumulation. A strengthened AL (relatively lower δ18OTOM values) is most evident during the Younger Dryas, Neoglaciation, and the Little Ice Age, consistent with lower peat preservation and C accumulation at the HT Fen, suggesting less precipitation reaches the leeward side of the Kenai Mountains during periods of enhanced AL strength. The peatlands on the Kenai Peninsula thrive when the AL is weak and the contribution of summer precipitation is higher, highlighting the importance of precipitation seasonality in promoting peat accumulation. This study demonstrates that δ18OTOM values in peat can be applied toward understand large-scale shifts in atmospheric circulation over millennial timescales.

  17. A deglacial and Holocene record of climate variability in south-central Alaska from stable oxygen isotopes and plant macrofossils in peat

    NASA Astrophysics Data System (ADS)

    Jones, Miriam C.; Wooller, Matthew; Peteet, Dorothy M.

    2014-03-01

    We used stable oxygen isotopes derived from bulk peat (δ18OTOM), in conjunction with plant macrofossils and previously published carbon accumulation records, in a ˜14,500 cal yr BP peat core (HT Fen) from the Kenai lowlands in south-central Alaska to reconstruct the climate history of the area. We find that patterns are broadly consistent with those from lacustrine records across the region, and agree with the interpretation that major shifts in δ18OTOM values indicate changes in strength and position of the Aleutian Low (AL), a semi-permanent low-pressure cell that delivers winter moisture to the region. We find decreased strength or a more westerly position of the AL (relatively higher δ18OTOM values) during the Bølling-Allerød, Holocene Thermal Maximum (HTM), and late Holocene, which also correspond to warmer climate regimes. These intervals coincide with greater peat preservation and enhanced carbon (C) accumulation rates at the HT Fen and with peatland expansion across Alaska. The HTM in particular may have experienced greater summer precipitation as a result of an enhanced Pacific subtropical high, a pattern consistent with modern δ18O values for summer precipitation. The combined warm summer temperatures and greater summer precipitation helped promote the observed rapid peat accumulation. A strengthened AL (relatively lower δ18OTOM values) is most evident during the Younger Dryas, Neoglaciation, and the Little Ice Age, consistent with lower peat preservation and C accumulation at the HT Fen, suggesting less precipitation reaches the leeward side of the Kenai Mountains during periods of enhanced AL strength. The peatlands on the Kenai Peninsula thrive when the AL is weak and the contribution of summer precipitation is higher, highlighting the importance of precipitation seasonality in promoting peat accumulation. This study demonstrates that δ18OTOM values in peat can be applied toward understand large-scale shifts in atmospheric circulation over millennial timescales.

  18. 49 CFR 24.103 - Criteria for appraisals.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Appraisal Foundation at the following URL: http://www.appraisalfoundation.org/htm/USPAP2004/toc.htm. 2 The..., regulations and practices. It is available at http://www.usdoj.gov/enrd/land-ack/toc.htm or in soft cover...

  19. The Severity of Retinal Degeneration in Rp1h Gene-Targeted Mice Is Dependent on Genetic Background

    PubMed Central

    Liu, Qin; Saveliev, Alexei; Pierce, Eric A.

    2009-01-01

    Purpose The severity of disease in patients with retinitis pigmentosa (RP) can vary significantly, even among patients with the same primary mutations. It is hypothesized that modifier genes play important roles in determining the severity of RP, including the retinitis pigmentosa 1 (RP1) form of disease. To investigate the basis of variation in disease expression for RP1 disease, the authors generated congenic mice with a gene-targeted retinitis pigmentosa 1 homolog (Rp1h) allele (Rp1htm1Eap) on several different genetic backgrounds and analyzed their retinal phenotypes. Methods The Rp1htm1Eap allele was placed onto the C57BL/6J, DBA1/J, and A/J backgrounds. Retinal function of the resultant congenic mice was evaluated using electroretino-graphic analyses. Retinal structure and ultrastructure were evaluated using light and electron microscopy. Rp1h protein location was determined with immunofluorescence microscopy. Results Analysis of the retinal phenotype of incipient congenic (N6) B6.129S-Rp1h+/tm1Eap, DBA.129S(B6)-Rp1h+/tm1Eap, and A.129S(B6)-Rp1h+/tm1Eap mice at 1 year of age showed retinal degeneration only in the A.129S(B6)-Rp1h+/tm1Eap mice. Further analyses revealed that the photoreceptors of the fully congenic A.129S(B6)-Rp1h+/tm1Eap mice show evidence of degeneration at 6 months of age and are almost completely lost by 18 months of age. In contrast, the photoreceptor cells in the fully congenic B6.129S-Rp1h+/tm1Eap mice remain healthy up to 18 months. Conclusions The severity of the retinal degeneration caused by the Rp1htm1Eap allele is notably dependent on genetic background. The development and characterization of the B6.129S-Rp1h+/tm1Eap and A.129S(B6)-Rp1h+/tm1Eap congenic mouse lines will facilitate identification of sequence alterations in genes that modify the severity of RP1 disease. PMID:19060274

  20. The severity of retinal degeneration in Rp1h gene-targeted mice is dependent on genetic background.

    PubMed

    Liu, Qin; Saveliev, Alexei; Pierce, Eric A

    2009-04-01

    The severity of disease in patients with retinitis pigmentosa (RP) can vary significantly, even among patients with the same primary mutations. It is hypothesized that modifier genes play important roles in determining the severity of RP, including the retinitis pigmentosa 1 (RP1) form of disease. To investigate the basis of variation in disease expression for RP1 disease, the authors generated congenic mice with a gene-targeted retinitis pigmentosa 1 homolog (Rp1h) allele (Rp1h(tm1Eap)) on several different genetic backgrounds and analyzed their retinal phenotypes. The Rp1h(tm1Eap) allele was placed onto the C57BL/6J, DBA1/J, and A/J backgrounds. Retinal function of the resultant congenic mice was evaluated using electroretinographic analyses. Retinal structure and ultrastructure were evaluated using light and electron microscopy. Rp1h protein location was determined with immunofluorescence microscopy. Analysis of the retinal phenotype of incipient congenic (N6) B6.129S-Rp1h(+/tm1Eap), DBA.129S(B6)-Rp1h(+/tm1Eap), and A.129S(B6)-Rp1h(+/tm1Eap) mice at 1 year of age showed retinal degeneration only in the A.129S(B6)-Rp1h(+/tm1Eap) mice. Further analyses revealed that the photoreceptors of the fully congenic A.129S(B6)-Rp1h(+/tm1Eap) mice show evidence of degeneration at 6 months of age and are almost completely lost by 18 months of age. In contrast, the photoreceptor cells in the fully congenic B6.129S-Rp1h(+/tm1Eap) mice remain healthy up to 18 months. The severity of the retinal degeneration caused by the Rp1h(tm1Eap) allele is notably dependent on genetic background. The development and characterization of the B6.129S-Rp1h(+/tm1Eap) and A.129S(B6)-Rp1h(+/tm1Eap) congenic mouse lines will facilitate identification of sequence alterations in genes that modify the severity of RP1 disease.

  1. Enhancement of the blood compatibility of dialyzer membranes by the physical adsorption of human thrombomodulin (ART-123).

    PubMed

    Omichi, Masaaki; Matsusaki, Michiya; Kato, Shinya; Maruyama, Ikuro; Akashi, Mitsuru

    2010-11-01

    ART-123 is a recombinant soluble human thrombomodulin (hTM) with excellent anticoagulant activity. We focused on improving the blood compatibility of the polysulfone-polyvinylpyrrolidone dialyzer surface by the physical adsorption of ART-123 onto the surface. The blood compatibility of the dialyzer with the hTM adsorbed membrane was evaluated by measuring the differential pressure between the arterial and the venous pressures and by blood parameters during blood circulation. The hTM adsorbed dialyzer membrane inhibited blood clot formation without heparin administration due to the anticoagulant activity of hTM for over 4 h. The physically adsorbed hTM was stable during blood circulation, and it did not affect activated clotting time, which is significant drawback of heparin administration, and blood cell counts of RBC, WBC, or platelets. The physical adsorption of hTM onto the dialyzer membrane will be a simple and safe method to prevent blood coagulation during dialysis instead of heparin administration. © 2010 Wiley Periodicals, Inc.

  2. 78 FR 45939 - Changes in Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-30

    ... Whiteland (12-03- Virginia Township team.com/lomrs.htm. 2075P). McMichael, Building, 209 Chairman, East... Tredyffrin (12-03- Michelle H. Municipal team.com/lomrs.htm. 2075P). Kichline, Building, 1100 Chairman... Scott K. York, Building and team.com/lomrs.htm. County (12-03- Chairman-at- Development 1164P). Large...

  3. 7 CFR 1755.900 - Abbreviations and Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... http://www.usda.gov/rus/telecom/listing_procedures/index_listing_procedures.htm, as well as additional....usda.gov/rus/telecom/publications/bulletins.htm. (2) Agency means the Rural Utilities Service, an... available on the Internet at http://www.usda.gov/rus/telecom/materials/lstomat.htm. (16) Loose tube buffer...

  4. 7 CFR 1755.900 - Abbreviations and Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... http://www.usda.gov/rus/telecom/listing_procedures/index_listing_procedures.htm, as well as additional....usda.gov/rus/telecom/publications/bulletins.htm. (2) Agency means the Rural Utilities Service, an... available on the Internet at http://www.usda.gov/rus/telecom/materials/lstomat.htm. (16) Loose tube buffer...

  5. 7 CFR 1755.900 - Abbreviations and Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... http://www.usda.gov/rus/telecom/listing_procedures/index_listing_procedures.htm, as well as additional....usda.gov/rus/telecom/publications/bulletins.htm. (2) Agency means the Rural Utilities Service, an... available on the Internet at http://www.usda.gov/rus/telecom/materials/lstomat.htm. (16) Loose tube buffer...

  6. Interfacial Engineering of Perovskite Solar Cells by Employing a Hydrophobic Copper Phthalocyanine Derivative as Hole-Transporting Material with Improved Performance and Stability.

    PubMed

    Jiang, Xiaoqing; Yu, Ze; Lai, Jianbo; Zhang, Yuchen; Hu, Maowei; Lei, Ning; Wang, Dongping; Yang, Xichuan; Sun, Licheng

    2017-04-22

    In high-performance perovskite solar cells (PSCs), hole-transporting materials (HTMs) play an important role in extracting and transporting the photo-generated holes from the perovskite absorber to the cathode, thus reducing unwanted recombination losses and enhancing the photovoltaic performance. Herein, solution-processable tetra-4-(bis(4-tert-butylphenyl)amino)phenoxy-substituted copper phthalocyanine (CuPc-OTPAtBu) was synthesized and explored as a HTM in PSCs. The optical, electrochemical, and thermal properties were fully characterized for this organic metal complex. The photovoltaic performance of PSCs employing this CuPc derivative as a HTM was further investigated, in combination with a mixed-ion perovskite as a light absorber and a low-cost vacuum-free carbon as cathode. The optimized devices [doped with 6 % (w/w) tetrafluoro-tetracyano-quinodimethane (F4TCNQ)] showed a decent power conversion efficiency of 15.0 %, with an open-circuit voltage of 1.01 V, a short-circuit current density of 21.9 mA cm -2 , and a fill factor of 0.68. Notably, the PSC devices studied also exhibited excellent long-term durability under ambient condition for 720 h, mainly owing to the introduction of the hydrophobic HTM interlayer, which prevents moisture penetration into the perovskite film. The present work emphasizes that solution-processable CuPc holds a great promise as a class of alternative HTMs that can be further explored for efficient and stable PSCs in the future. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. The HTM Spatial Pooler-A Neocortical Algorithm for Online Sparse Distributed Coding.

    PubMed

    Cui, Yuwei; Ahmad, Subutai; Hawkins, Jeff

    2017-01-01

    Hierarchical temporal memory (HTM) provides a theoretical framework that models several key computational principles of the neocortex. In this paper, we analyze an important component of HTM, the HTM spatial pooler (SP). The SP models how neurons learn feedforward connections and form efficient representations of the input. It converts arbitrary binary input patterns into sparse distributed representations (SDRs) using a combination of competitive Hebbian learning rules and homeostatic excitability control. We describe a number of key properties of the SP, including fast adaptation to changing input statistics, improved noise robustness through learning, efficient use of cells, and robustness to cell death. In order to quantify these properties we develop a set of metrics that can be directly computed from the SP outputs. We show how the properties are met using these metrics and targeted artificial simulations. We then demonstrate the value of the SP in a complete end-to-end real-world HTM system. We discuss the relationship with neuroscience and previous studies of sparse coding. The HTM spatial pooler represents a neurally inspired algorithm for learning sparse representations from noisy data streams in an online fashion.

  8. What impact do anxiety, depression, perceived control and technology capability have on whether patients with chronic heart failure take-up or continue to use home tele-monitoring services? Study design of ADaPT-HF.

    PubMed

    Crundall-Goode, Amanda; Goode, Kevin M; Clark, Andrew L

    2017-04-01

    Home tele-monitoring (HTM) is used to monitor the clinical signs and symptoms of patients with chronic heart failure (CHF) in order to reduce unplanned hospital admissions. However, not all patients who are referred will agree to use HTM, and some patients choose to withdraw early from its use. ADaPT-HF will investigate whether depression, anxiety, low perceived control, reduced technology capability, level of education, age or the severity or complexity of a patient's illness can predict refusal of, or early withdrawal from, HTM in patients with CHF. The study will recruit 288 patients who have been recently admitted to hospital with heart failure who have been referred for HTM. At the time of referral, patients will complete depression (nine-item Patient Health Questionnaire), anxiety (seven-item Generalised Anxiety Disorder questionnaire), perceived control (eight-item revised Controlled Attitudes Scale) and technology capability (ten-item Technology Readiness Index 2.0) screening questionnaires. In addition, data on demographics, diagnosis, clinical examination, socio-economic status, history of comorbidities, medication, biochemistry and haematology will be recorded. The primary outcome will be a composite of refusal of or early withdrawal from HTM. The principle analysis will be made using logistic regression. By establishing which factors influence a patient's decision to refuse or withdraw early from HTM, it may be possible to redesign HTM referral processes. It may be that patients with CHF who also have depression, anxiety, low control and poor technology skills should not be referred until they receive appropriate support or that they should be managed differently when they do receive HTM. The results of ADAPT-HF may provide a way of making more efficient and cost-effective use of HTM services.

  9. The Role of Healthcare Technology Management in Facilitating Medical Device Cybersecurity.

    PubMed

    Busdicker, Mike; Upendra, Priyanka

    2017-09-02

    This article discusses the role of healthcare technology management (HTM) in medical device cybersecurity and outlines concepts that are applicable to HTM professionals at a healthcare delivery organization or at an integrated delivery network, regardless of size. It provides direction for HTM professionals who are unfamiliar with the security aspects of managing healthcare technologies but are familiar with standards from The Joint Commission (TJC). It provides a useful set of recommendations, including relevant references for incorporating good security practices into HTM practice. Recommendations for policies, procedures, and processes referencing TJC standards are easily applicable to HTM departments with limited resources and to those with no resource concerns. The authors outline processes from their organization as well as best practices learned through information sharing at AAMI, National Health Information Sharing and Analysis Center (NH-ISAC), and Medical Device Innovation, Safety, and Security Consortium (MDISS) conferences and workshops.

  10. Numerical simulation of multiple-physical fields coupling for thermal anomalies before earthquakes: A case study of the 2008 Wenchuan Ms8.0 earthquake in southwest China

    NASA Astrophysics Data System (ADS)

    Deng, Z.

    2017-12-01

    It has become a highly focused issue that thermal anomalies appear before major earthquakes. There are various hypotheses about the mechanism of thermal anomalies. Because of lacking of enough evidences, the mechanism is still require to be further researched. Gestation and occurrence of a major earthquake is related with the interaction of multi-physical fields. The underground fluid surging out the surface is very likely to be the reason for the thermal anomaly. This study tries to answer some question, such as how the geothermal energy transfer to the surface, and how the multiple-physical fields interacted. The 2008 Wenchuan Ms8.0 earthquake, is one of the largest evens in the last decade in China mainland. Remote sensing studies indicate that distinguishable thermal anomalies occurred several days before the earthquake. The heat anomaly value is more than 3 times the average in normal time and distributes along the Longmen Shan fault zone. Based on geological and geophysical data, 2D dynamic model of coupled stress, seepage and thermal fields (HTM model) is constructed. Then using the COMSOL multi-physics filed software, this work tries to reveal the generation process and distribution patterns of thermal anomalies prior to thrust-type major earthquakes. The simulation get the results: (1)Before the micro rupture, with the increase of compression, the heat current flows to the fault in the footwall on the whole, while in the hanging wall of the fault, particularly near the ground surface, the heat flow upward. In the fault zone, heat flow upward along the fracture surface, heat flux in the fracture zone is slightly larger than the wall rock;, but the value is all very small. (2)After the occurrence of the micro fracture, the heat flow rapidly collects to the faults. In the fault zones, the heat flow accelerates up along the fracture surfaces, the heat flux increases suddenly, and the vertical heat flux reaches to the maximum. The heat flux in the 3 fracture zones is obviously larger than that in the non fracture zone. The high heat flux anomaly can continue several days to one month. The simulation results is consistent with the reality earthquake cases.

  11. Early Holocene deglaciation of Drangajökull, Vestfirðir, Iceland

    NASA Astrophysics Data System (ADS)

    Harning, David J.; Geirsdóttir, Áslaug; Miller, Gifford H.; Zalzal, Kate

    2016-12-01

    The status of Icelandic ice caps during the early Holocene provides important constraints on North Atlantic climate and the mechanisms behind natural climate variability. A recent study postulates that Drangajökull on Vestfirðir, Iceland, persisted through the Holocene Thermal Maximum (HTM, 7.9-5.5 ka) and may be a relic from the last glacial period. We test this hypothesis with a suite of sediment cores from threshold lakes both proximal and distal to the ice cap's modern margin. Distal lakes document rapid early Holocene deglaciation from the coast and across the highlands south of the glacier. Sediment from Skorarvatn, a lake to the north of Drangajökull, shows that the northern margin of the ice cap reached a size comparable to its contemporary limit by ∼10.3 ka. Two southeastern lakes with catchments extending well beneath modern Drangajökull confirm that by ∼9.2 ka, the ice cap was reduced to ∼20% of its current area. A continuous 10.3ka record of biological productivity from Skorarvatn's sediment indicates local peak warmth occurred between 9 and 6.9 ka. The combination of warm and dry summers on Vestfirðir suggests that Drangajökull very likely melted completely shortly after 9.2 ka, similar to most other Icelandic ice caps.

  12. A Deglacial and Holocene Record of Climate Variability in South-Central Alaska from Stable Oxygen Isotopes and Plant Macrofossils in Peat

    NASA Technical Reports Server (NTRS)

    Jones, Miriam C.; Wooller, Matthew; Peteet, Dorothy M.

    2014-01-01

    We used stable oxygen isotopes derived from bulk peat (delta-O-18(sub TOM) in conjunction with plant macrofossils and previously published carbon accumulation records, in a approximately14,500 cal yr BP peat core (HT Fen) from the Kenai lowlands in south-central Alaska to reconstruct the climate history of the area. We find that patterns are broadly consistent with those from lacustrine records across the region, and agree with the interpretation that major shifts in delta-O-18(sub TOM) values indicate changes in strength and position of the Aleutian Low (AL), a semi-permanent low-pressure cell that delivers winter moisture to the region. We find decreased strength or a more westerly position of the AL (relatively higher delta-O-18(sub TOM) values) during the Bolling-Allerod, Holocene Thermal Maximum (HTM), and late Holocene, which also correspond to warmer climate regimes. These intervals coincide with greater peat preservation and enhanced carbon (C) accumulation rates at the HT Fen and with peatland expansion across Alaska. The HTM in particular may have experienced greater summer precipitation as a result of an enhanced Pacific subtropical high, a pattern consistent with modern delta-O-18 values for summer precipitation. The combined warm summer temperatures and greater summer precipitation helped promote the observed rapid peat accumulation. A strengthened AL (relatively lower delta-O-18(sub TOM) values) is most evident during the Younger Dryas, Neoglaciation, and the Little Ice Age, consistent with lower peat preservation and C accumulation at the HT Fen, suggesting less precipitation reaches the leeward side of the Kenai Mountains during periods of enhanced AL strength. The peatlands on the Kenai Peninsula thrive when the AL is weak and the contribution of summer precipitation is higher, highlighting the importance of precipitation seasonality in promoting peat accumulation. This study demonstrates that delta-O-18(sub TOM) values in peat can be applied toward understand large-scale shifts in atmospheric circulation over millennial timescales.

  13. Quantifying soil carbon accumulation in Alaskan terrestrial ecosystems during the last 15 000 years

    DOE PAGES

    Wang, Sirui; Zhuang, Qianlai; Yu, Zicheng

    2016-11-25

    Northern high latitudes contain large amounts of soil organic carbon (SOC), of which Alaskan terrestrial ecosystems account for a substantial proportion. In this study, the SOC accumulation in Alaskan terrestrial ecosystems over the last 15 000 years was simulated using a process-based biogeochemistry model for both peatland and non-peatland ecosystems. Comparable with the previous estimates of 25–70 Pg C in peatland and 13–22 Pg C in non-peatland soils within 1 m depth in Alaska using peat-core data, our model estimated a total SOC of 36–63 Pg C at present, including 27–48 Pg C in peatland soils and 9–15 Pg C in non-peatland soils. Current vegetation stored 2.5–3.7 Pg C in Alaska, with 0.3–0.6 Pg C in peatlandsmore » and 2.2–3.1 Pg C in non-peatlands. The simulated average rate of peat C accumulation was 2.3 Tg C yr −1, with a peak value of 5.1 Tg C yr −1 during the Holocene Thermal Maximum (HTM) in the early Holocene, 4-fold higher than the average rate of 1.4 Tg C yr −1 over the rest of the Holocene. The SOC accumulation slowed down, or even ceased, during the neoglacial climate cooling after the mid-Holocene, but increased again in the 20th century. The model-estimated peat depths ranged from 1.1 to 2.7 m, similar to the field-based estimate of 2.29 m for the region. We found that the changes in vegetation and their distributions were the main factors in determining the spatial variations of SOC accumulation during different time periods. Warmer summer temperature and stronger radiation seasonality, along with higher precipitation in the HTM and the 20th century, might have resulted in the extensive peatland expansion and carbon accumulation.« less

  14. Quantifying soil carbon accumulation in Alaskan terrestrial ecosystems during the last 15 000 years

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wang, Sirui; Zhuang, Qianlai; Yu, Zicheng

    Northern high latitudes contain large amounts of soil organic carbon (SOC), of which Alaskan terrestrial ecosystems account for a substantial proportion. In this study, the SOC accumulation in Alaskan terrestrial ecosystems over the last 15 000 years was simulated using a process-based biogeochemistry model for both peatland and non-peatland ecosystems. Comparable with the previous estimates of 25–70 Pg C in peatland and 13–22 Pg C in non-peatland soils within 1 m depth in Alaska using peat-core data, our model estimated a total SOC of 36–63 Pg C at present, including 27–48 Pg C in peatland soils and 9–15 Pg C in non-peatland soils. Current vegetation stored 2.5–3.7 Pg C in Alaska, with 0.3–0.6 Pg C in peatlandsmore » and 2.2–3.1 Pg C in non-peatlands. The simulated average rate of peat C accumulation was 2.3 Tg C yr −1, with a peak value of 5.1 Tg C yr −1 during the Holocene Thermal Maximum (HTM) in the early Holocene, 4-fold higher than the average rate of 1.4 Tg C yr −1 over the rest of the Holocene. The SOC accumulation slowed down, or even ceased, during the neoglacial climate cooling after the mid-Holocene, but increased again in the 20th century. The model-estimated peat depths ranged from 1.1 to 2.7 m, similar to the field-based estimate of 2.29 m for the region. We found that the changes in vegetation and their distributions were the main factors in determining the spatial variations of SOC accumulation during different time periods. Warmer summer temperature and stronger radiation seasonality, along with higher precipitation in the HTM and the 20th century, might have resulted in the extensive peatland expansion and carbon accumulation.« less

  15. Syphilis

    MedlinePlus

    ... cdc.gov/std/syphilis/ stdfact-msm-syphilis.htm Congenital Syphilis - Fact Sheet https://www.cdc.gov/std/syphilis/ stdfact-congenital-syphilis.htm STDs during Pregnancy - Fact Sheet https://www. ...

  16. On the Optimum Architecture of the Biologically Inspired Hierarchical Temporal Memory Model Applied to the Hand-Written Digit Recognition

    NASA Astrophysics Data System (ADS)

    Štolc, Svorad; Bajla, Ivan

    2010-01-01

    In the paper we describe basic functions of the Hierarchical Temporal Memory (HTM) network based on a novel biologically inspired model of the large-scale structure of the mammalian neocortex. The focus of this paper is in a systematic exploration of possibilities how to optimize important controlling parameters of the HTM model applied to the classification of hand-written digits from the USPS database. The statistical properties of this database are analyzed using the permutation test which employs a randomization distribution of the training and testing data. Based on a notion of the homogeneous usage of input image pixels, a methodology of the HTM parameter optimization is proposed. In order to study effects of two substantial parameters of the architecture: the patch size and the overlap in more details, we have restricted ourselves to the single-level HTM networks. A novel method for construction of the training sequences by ordering series of the static images is developed. A novel method for estimation of the parameter maxDist based on the box counting method is proposed. The parameter sigma of the inference Gaussian is optimized on the basis of the maximization of the belief distribution entropy. Both optimization algorithms can be equally applied to the multi-level HTM networks as well. The influences of the parameters transitionMemory and requestedGroupCount on the HTM network performance have been explored. Altogether, we have investigated 2736 different HTM network configurations. The obtained classification accuracy results have been benchmarked with the published results of several conventional classifiers.

  17. HTM Spatial Pooler With Memristor Crossbar Circuits for Sparse Biometric Recognition.

    PubMed

    James, Alex Pappachen; Fedorova, Irina; Ibrayev, Timur; Kudithipudi, Dhireesha

    2017-06-01

    Hierarchical Temporal Memory (HTM) is an online machine learning algorithm that emulates the neo-cortex. The development of a scalable on-chip HTM architecture is an open research area. The two core substructures of HTM are spatial pooler and temporal memory. In this work, we propose a new Spatial Pooler circuit design with parallel memristive crossbar arrays for the 2D columns. The proposed design was validated on two different benchmark datasets, face recognition, and speech recognition. The circuits are simulated and analyzed using a practical memristor device model and 0.18 μm IBM CMOS technology model. The databases AR, YALE, ORL, and UFI, are used to test the performance of the design in face recognition. TIMIT dataset is used for the speech recognition.

  18. Holocene evolution of Hans Tausen Iskappe (Greenland): merging constraints and models

    NASA Astrophysics Data System (ADS)

    Zekollari, Harry; Lecavalier, Benoit S.; Huybrechts, Philippe

    2017-04-01

    In this study the Holocene evolution of Hans Tausen Iskappe (western Peary Land, Greenland) is investigated. Constraints on the ice cap evolution are combined with climatic records in a numerical ice flow - surface mass balance (SMB) model to better understand the palaeoenvironmental and climatic evolution of this region. Our simulations suggest that after disconnecting from the Greenland Ice Sheet (GrIS) the ice cap had roughly its present-day size and geometry around 8.5-9 ka ago. An ice core drilled to the bed indicates that the southern part of the ice cap subsequently disappeared during the Holocene Thermal Maximum (HTM) and this collapse can be reproduced, but the model suggests that the northern part of the ice cap most likely survived this warmer period. The late Holocene growth of the ice cap to its Little Ice Age (LIA) maximum neoglacial extent can be reproduced from the temperature reconstruction. The simulations suggest that over the last millennia the local precipitation may have been up to 70-80% higher than at present. By coupling the pre-industrial temperature forcing to a post-LIA warming trend, it is concluded that the warming between the end of the LIA and the period 1961-1990 was between 1 and 2°C. In all experiments the ice flow model complexity and horizontal resolution have only a minor effect on the long-term evolution of the ice cap, which is largely driven by SMB changes. On the other hand the glacial isostatic adjustments (GIA) need to be accounted for in a detailed manner, as this has a large impact on the modelled Holocene ice cap evolution.

  19. Integrated Ceramic Membrane System for Hydrogen Production

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schwartz, Joseph; Lim, Hankwon; Drnevich, Raymond

    2010-08-05

    Phase I was a technoeconomic feasibility study that defined the process scheme for the integrated ceramic membrane system for hydrogen production and determined the plan for Phase II. The hydrogen production system is comprised of an oxygen transport membrane (OTM) and a hydrogen transport membrane (HTM). Two process options were evaluated: 1) Integrated OTM-HTM reactor – in this configuration, the HTM was a ceramic proton conductor operating at temperatures up to 900°C, and 2) Sequential OTM and HTM reactors – in this configuration, the HTM was assumed to be a Pd alloy operating at less than 600°C. The analysis suggestedmore » that there are no technical issues related to either system that cannot be managed. The process with the sequential reactors was found to be more efficient, less expensive, and more likely to be commercialized in a shorter time than the single reactor. Therefore, Phase II focused on the sequential reactor system, specifically, the second stage, or the HTM portion. Work on the OTM portion was conducted in a separate program. Phase IIA began in February 2003. Candidate substrate materials and alloys were identified and porous ceramic tubes were produced and coated with Pd. Much effort was made to develop porous substrates with reasonable pore sizes suitable for Pd alloy coating. The second generation of tubes showed some improvement in pore size control, but this was not enough to get a viable membrane. Further improvements were made to the porous ceramic tube manufacturing process. When a support tube was successfully coated, the membrane was tested to determine the hydrogen flux. The results from all these tests were used to update the technoeconomic analysis from Phase I to confirm that the sequential membrane reactor system can potentially be a low-cost hydrogen supply option when using an existing membrane on a larger scale. Phase IIB began in October 2004 and focused on demonstrating an integrated HTM/water gas shift (WGS) reactor to increase CO conversion and produce more hydrogen than a standard water gas shift reactor would. Substantial improvements in substrate and membrane performance were achieved in another DOE project (DE-FC26-07NT43054). These improved membranes were used for testing in a water gas shift environment in this program. The amount of net H2 generated (defined as the difference of hydrogen produced and fed) was greater than would be produced at equilibrium using conventional water gas shift reactors up to 75 psig because of the shift in equilibrium caused by continuous hydrogen removal. However, methanation happened at higher pressures, 100 and 125 psig, and resulted in less net H2 generated than would be expected by equilibrium conversion alone. An effort to avoid methanation by testing in more oxidizing conditions (by increasing CO2/CO ratio in a feed gas) was successful and net H2 generated was higher (40-60%) than a conventional reactor at equilibrium at all pressures tested (up to 125 psig). A model was developed to predict reactor performance in both cases with and without methanation. The required membrane area depends on conditions, but the required membrane area is about 10 ft2 to produce about 2000 scfh of hydrogen. The maximum amount of hydrogen that can be produced in a membrane reactor decreased significantly due to methanation from about 2600 scfh to about 2400 scfh. Therefore, it is critical to eliminate methanation to fully benefit from the use of a membrane in the reaction. Other modeling work showed that operating a membrane reactor at higher temperature provides an opportunity to make the reactor smaller and potentially provides a significant capital cost savings compared to a shift reactor/PSA combination.« less

  20. 76 FR 66311 - Draft Documents To Support Submission of an Electronic Common Technical Document; Availability

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-26

    .../DevelopmentApprovalProcess/FormsSubmissionRequirements/ElectronicSubmissions/ucm253101.htm , http://www.fda.gov/BiologicsBloodVaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm , or http...

  1. Recent advances in long-term climate and moisture reconstructions from the Baltic region: Exploring the potential for a new multi-millennial tree-ring chronology

    NASA Astrophysics Data System (ADS)

    Edvardsson, Johannes; Corona, Christophe; Mažeika, Jonas; Pukienė, Rutile; Stoffel, Markus

    2016-01-01

    This study presents the first results from an ongoing initiative to develop a multi-millennial Baltic tree-ring width (TRW) chronology consisting of 12 floating records from subfossil Scots pines (Pinus sylvestris L.) extracted from three Lithuanian peat-mining areas. The floating series have been complemented with absolutely dated TRW chronologies which were obtained from living trees growing in unmanaged and unexploited peatland areas adjacent to each of the above study sites. The subfossil material has been dated by radiocarbon and shows a temporal spread over the last 6000 years, with assemblages of trees during the Holocene Thermal Maximum (HTM; 8000-4000 BP) and the onset of the Medieval Warm Period (MWP, AD 900-1350). Annual tree growth and sample replication of peatland pines reflect moisture variations and long-term climate variability. The importance of extending the TRW chronologies should not therefore be underestimated as (1) climate records of comparable length and resolution do not exist for the Baltic region, but also as (2) a result of a widespread lack of detailed moisture proxies spanning several millennia. Our data clearly show that a 6000-yr, continuous pine chronology from the Baltic region is a realistic objective, and would doubtlessly fill a major geographic gap in an ecologically sensitive region located at the interface between the temperate and boreal vegetation zones.

  2. Terrorism and Cybercrime

    DTIC Science & Technology

    2008-05-01

    www.fbi.gov/congress/congress03/farnan051503.htm 63 Federal Bureau of Investigations. “Netting Cyber Criminals : Inside the Connecticut Computer Crimes Task...http://www.fbi.gov/cyberinvest/cyberhome.htm Federal Bureau of Investigations. “Netting Cyber Criminals : Inside the Connecticut Computer Crimes

  3. 100 °C Thermal Stability of Printable Perovskite Solar Cells Using Porous Carbon Counter Electrodes.

    PubMed

    Baranwal, Ajay K; Kanaya, Shusaku; Peiris, T A Nirmal; Mizuta, Gai; Nishina, Tomoya; Kanda, Hiroyuki; Miyasaka, Tsutomu; Segawa, Hiroshi; Ito, Seigo

    2016-09-22

    Many efforts have been made towards improving perovskite (PVK) solar cell stability, but their thermal stability, particularly at 85 °C (IEC 61646 climate chamber tests), remains a challenge. Outdoors, the installed solar cell temperature can reach up to 85 °C, especially in desert regions, providing sufficient motivation to study the effect of temperature stress at or above this temperature (e.g., 100 °C) to confirm the commercial viability of PVK solar cells for industrial companies. In this work, a three-layer printable HTM-free CH 3 NH 3 PbI 3 PVK solar cell with a mesoporous carbon back contact and UV-curable sealant was fabricated and tested for thermal stability over 1500 h at 100 °C. Interestingly, the position of the UV-curing glue was found to drastically affect the device stability. The side-sealed cells show high PCE stability and represent a large step toward commercialization of next generation organic-inorganic lead halide PVK solar cells. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. What Happens when Sea Ice Retreats, Peatlands Form, and a Landbridge Drowns? A Molecular View of the Last Deglacial from the Pacific-Arctic Gateway

    NASA Astrophysics Data System (ADS)

    Kocis, J. J.; Petsch, S.; Castañeda, I. S.; Brigham-Grette, J.

    2014-12-01

    Arctic peatlands and thermokarst lakes (TK) are thought to play a significant role in changing atmospheric methane concentration (AMC) during the last deglacial. However, there is debate concerning timing of their initiation and extent they drove variations in AMC. Models show sea ice cover (SIC) and sea surface temperatures (SSTs) can also play a significant role. Yet, changes in peatland/TK lake areal extent in response to those dynamics as continental shelves were submerged are often not considered. To examine such connections, we report on molecular proxies in marine records that reveal change in terrestrial organic matter (TOM) export, SIC, and SSTs as sea levels rose during the last 18 ka in the Pacific-Arctic Gateway. Here, TOM input to the ocean was tracked by measuring the flux of branched glycerol dialkyl glycerol tetraethers, n-alkyl lipids, and pentacyclic triterpenoids. SIC and SSTs were reconstructed using modern calibrations of highly branched isoprenoid alkene abundances in surface sediments from the Bering and Chukchi Seas. SSTs were also reconstructed based on the relative abundance of isoprenoid glycerol dialkyl glycerol tetraethers. Our sediment records reveal increased flux of TOM coincides with peatland/TK lake initiation, reduced SIC (~20%), and warmer SSTs (~4°C) as AMC increased during the Bølling-Allerød (BA). Terrestrial flux dramatically reduced as SIC increased (~50%) and SSTs cooled as AMC fell during the Younger Dryas. Most notably, TOM export rapidly rebounds as AMC abruptly rose throughout the Holocene Thermal Maximum (HTM), when SSTs warmed by ~3°C and SIC diminished and peatland areal extent increased. Using multi-proxy evidence in combination with a simple model that accounts for submergence of peatland/TK lake area, we estimate that the exposed Beringian shelf emitted an amount of CH4 comparable to previously reported peatland emissions in Alaska during the BA and HTM. The GDGT-based methane index (MI) was <0.3 throughout our sediment records, suggesting destabilized marine gas hydrates were not the principal source of methane. Results of our study provide novel marine-based evidence for the timing of peatland and TK lake initiation and the role sea ice played in contributing to variations in AMC during deglacial sea level rise in the Arctic.

  5. Comparison of Nerve Growth Factor Receptor Binding Models Using Heterodimeric Muteins

    PubMed Central

    Mehta, Hrishikesh M.; Woo, Sang B.; Neet, Kenneth E.

    2013-01-01

    Nerve growth factor (NGF) is a homodimer that binds to two distinct receptor types, TrkA and p75, to support survival and differentiation of neurons. The high-affinity binding on the cell surface is believed to involve a heteroreceptor complex, but its exact nature is unclear. We developed a heterodimer (heteromutein) of two NGF muteins that can bind p75 and TrkA on opposite sides of the heterodimer, but not two TrkA receptors. Previously described muteins are Δ9/13 that is TrkA negative and 7-84-103 that is signal selective through TrkA. The heteromutein (Htm1) was used to study the heteroreceptor complex formation and function, in the putative absence of NGF-induced TrkA dimerization. Cellular binding assays indicated that Htm1 does not bind TrkA as efficiently as wild-type (wt) NGF but has better affinity than either homodimeric mutein. Htm1, 7-84-103, and Δ9/13 were each able to compete for cold-temperature, cold-chase stable binding on PC12 cells, indicating that binding to p75 was required for a portion of this high-affinity binding. Survival, neurite outgrowth, and MAPK signaling in PC12 cells also showed a reduced response for Htm1, compared with wtNGF, but was better than the parent muteins in the order wtNGF > Htm1 > 7-84-103 >> Δ9/13. Htm1 and 7-84-103 demonstrated similar levels of survival on cells expressing only TrkA. In the longstanding debate on the NGF receptor binding mechanism, our data support the ligand passing of NGF from p75 to TrkA involving a transient heteroreceptor complex of p75-NGF-TrkA. PMID:22903500

  6. Strategy to Boost the Efficiency of Mixed-Ion Perovskite Solar Cells: Changing Geometry of the Hole Transporting Material.

    PubMed

    Zhang, Jinbao; Xu, Bo; Johansson, Malin B; Vlachopoulos, Nick; Boschloo, Gerrit; Sun, Licheng; Johansson, Erik M J; Hagfeldt, Anders

    2016-07-26

    The hole transporting material (HTM) is an essential component in perovskite solar cells (PSCs) for efficient extraction and collection of the photoinduced charges. Triphenylamine- and carbazole-based derivatives have extensively been explored as alternative and economical HTMs for PSCs. However, the improvement of their power conversion efficiency (PCE), as well as further investigation of the relationship between the chemical structure of the HTMs and the photovoltaic performance, is imperatively needed. In this respect, a simple carbazole-based HTM X25 was designed on the basis of a reference HTM, triphenylamine-based X2, by simply linking two neighboring phenyl groups in a triphenylamine unit through a carbon-carbon single bond. It was found that a lowered highest occupied molecular orbital (HOMO) energy level was obtained for X25 compared to that of X2. Besides, the carbazole moiety in X25 improved the molecular planarity as well as conductivity property in comparison with the triphenylamine unit in X2. Utilizing the HTM X25 in a solar cell with mixed-ion perovskite [HC(NH2)2]0.85(CH3NH3)0.15Pb(I0.85Br0.15)3, a highest reported PCE of 17.4% at 1 sun (18.9% under 0.46 sun) for carbazole-based HTM in PSCs was achieved, in comparison of a PCE of 14.7% for triphenylamine-based HTM X2. From the steady-state photoluminescence and transient photocurrent/photovoltage measurements, we conclude that (1) the lowered HOMO level for X25 compared to X2 favored a higher open-circuit voltage (Voc) in PSCs; (2) a more uniform formation of X25 capping layer than X2 on the surface of perovskite resulted in more efficient hole transport and charge extraction in the devices. In addition, the long-term stability of PSCs with X25 is significantly enhanced compared to X2 due to its good uniformity of HTM layer and thus complete coverage on the perovskite. The results provide important information to further develop simple and efficient small molecular HTMs applied in solar cells.

  7. 30 CFR 1210.56 - Where can I find more information on how to complete the royalty report?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... http://www.mrm.boemre.gov/ReportingServices/Handbooks/Handbks.htm or from ONRR at P.O. Box 5760, Denver... on our Internet Web site at http://www.mrm.boemre.gov/ReportingServices/Forms/AFSOil_Gas.htm, or you...

  8. 76 FR 16795 - The National Antimicrobial Resistance Monitoring System Strategic Plan 2011-2015; Request for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-25

    ....fda.gov/AnimalVeterinary/SafetyHealth/AntimicrobialResistance/NationalAntimicrobialResistanceMonitoringSystem/default.htm , http://www.fda.gov/AnimalVeterinary/SafetyHealth/AntimicrobialResistance/NationalAntimicrobialResistanceMonitoringSystem/ucm062630.htm , http://www.fda.gov/AnimalVeterinary/Safety...

  9. 77 FR 58560 - Proposed Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-21

    ... resolution process. SRPs are independent panels of experts in hydrology, hydraulics, and other pertinent.../dnr/water/6497.htm City of Tipton Tipton County Courthouse, 101 East Jefferson Street, Tipton, IN... Incorporated Areas Maps Available for Inspection Online at: http://www.in.gov/dnr/water/6648.htm City of...

  10. Effects of hydroxy trace minerals on oxidative metabolism, cytological endometritis, and performance of transition dairy cows.

    PubMed

    Yasui, T; Ryan, C M; Gilbert, R O; Perryman, K R; Overton, T R

    2014-01-01

    Multiparous Holstein cows (n=60) were used to determine effects of supplementing hydroxy forms of Zn, Cu, and Mn compared with 2 other common supplementation strategies on oxidative metabolism, cytological endometritis, and performance of transition cows. After a 1-wk pretreatment period, cows were assigned randomly to 1 of 3 dietary treatments from 21 d before expected calving through 84 d postcalving. Dietary treatments administered by daily top-dressing included (1) inorganic sulfate forms of Zn, Cu, and Mn (ITM); (2) a blend (75:25) of sulfates and organic complexes of Zn, Cu, and Mn (ITM/OTM); and (3) hydroxy trace minerals (HTM) of Zn, Cu, and Mn. The resulting dietary concentrations of supplemental Zn, Cu, and Mn were similar among treatments and averaged 40, 10, and 27 mg/kg, respectively, before calving and 59, 15, and 40 mg/kg, respectively, after calving. Total concentrations of Zn, Cu, and Mn averaged 80, 16, and 62 mg/kg during the prepartum period and 102, 23, and 75 mg/kg, respectively, during the postpartum period. Overall, effects of treatment on milk yield and milk composition were not significant. Cows fed HTM during the prepartum period had higher body weight (BW) than those fed ITM during the prepartum period and had higher BW during the postpartum period than those fed the other treatments; however, BW change, body condition score, and body condition score change were not affected by treatment. Plasma total antioxidant capacity was lower in cows fed HTM than ITM but was not different from cows fed ITM/OTM. Cows fed HTM tended to have lower concentrations of plasma thiobarbituric acid reactive substances than those fed ITM during the whole study period, but plasma thiobarbituric acid reactive substances were not different between HTM and ITM/OTM. Plasma haptoglobin was lower in cows fed HTM than ITM/OTM at 1 wk postpartum. Endometrial cytology 7d postcalving and cytological endometritis as assessed on 1d between 40 and 60 d postcalving was not affected by treatment. In conclusion, supplementation with HTM sources of Zn, Cu, and Mn modulated plasma variables related to oxidative metabolism compared with supplementation with ITM; however, HTM and ITM/OTM resulted in similar responses. Furthermore, the source of trace minerals did not affect performance or uterine health in this experiment. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  11. Impact of Trace Minerals on Wound Healing of Footpad Dermatitis in Broilers.

    PubMed

    Chen, Juxing; Tellez, Guillermo; Escobar, Jeffery; Vazquez-Anon, Mercedes

    2017-05-15

    Footpad dermatitis (FPD) is used in the poultry industry as an animal welfare criterion to determine stocking density. Trace minerals (TM) play a role in skin integrity and wound healing. This study evaluated the impact of TM on FPD and consisted of 3 treatments supplemented with 0 (NTM), low (LTM) and high (HTM) TM levels in the same basal diet. On d21, 71% birds in all treatments developed mild FPD and pens were top-dressed with dry litter to promote FPD healing. Compared to NTM, LTM reduced area under the curve (AUC) of FPD lesion scores during d21-42, HTM reduced the AUC of FPD lesion scores during d7-21 and d21-42. LTM improved growth performance on d14, HTM improved growth performance on d14 and d28. LTM and/or HTM increased gene expression of VEGF, TIMP3, TIMP4, MMP13, ITGA2, ITGA3 and CD40, which promoted collagen synthesis, deposition and organization; cell migration, matrix remodeling, and angiogenesis. LTM and/or HTM increased inflammation by upregulating TNFα and IL-1β during the early wound healing phase and reduced inflammation by downregulating IL-1β during the late wound healing phase. Our findings showed that TM not only improved growth performance but also reduced FPD development by promoting FPD wound healing.

  12. Horse Training and Management: Program of Excellence.

    ERIC Educational Resources Information Center

    Lane, Marvin

    This report on Lamar Community College's Horse Training and Management (HTM) program assesses the quality of the educational experience provided by the program, the quality of the faculty and students, institutional financial commitment to the program, contribution of the HTM program to state and local economic development, and external funding…

  13. 78 FR 14565 - Changes in Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-06

    ..., Building and team.com/lomrs.htm. County (12-03- Chairman at Development 1200P). Large, Loudoun Department... D. Public Works, team.com/lomrs.htm. 2078P). Sessoms, Jr., Municipal Center, Mayor, City of Building... flood insurance premium rates for new buildings and the contents of those buildings. For rating purposes...

  14. 78 FR 48885 - Changes in Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-12

    ...- August 12, 2013...... 420713 Whitpain (12-03- Joseph J. Palmer, Building, 960 team.com/lomrs.htm. 1849P... team.com/lomrs.htm. City of Sachse, Department, 5560 3815 Sachse Road, Highway 78, Building B, Sachse... flood insurance premium rates for new buildings and the contents of those buildings. For rating purposes...

  15. 78 FR 18233 - Medical Devices; Technical Amendment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-26

    ... the right column: Section Remove Add 814.20 http://www.fda.gov/ http://www.fda.gov/ cdrh/devadvice.../ PremarketApproval PMA/default.htm. 822.7 http://www.fda.gov/ http://www.fda.gov/ cdrh/ombudsman/ AboutFDA/ dispute.html. CentersOffices/ OfficeofMedicalPr oductsandTobacco/ CDRH/ CDRHOmbudsman/ default.htm. 822.15...

  16. 77 FR 74859 - Proposed Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-18

    ... resolution process. SRPs are independent panels of experts in hydrology, hydraulics, and other pertinent...://www.in.gov/dnr/water/6401.htm City of Delphi Carroll County Area Plan Commission, Carroll County... Inspection Online at: http://www.in.gov/dnr/water/7339.htm Town of Cumberland Municipal Building, 11501 East...

  17. 78 FR 28888 - Proposed Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-16

    ... resolution process. SRPs are independent panels of experts in hydrology, hydraulics, and other pertinent.../dnr/water/6670.htm City of Oakland City City Hall, 210 East Washington Street, Oakland City, IN 47660... Areas Maps Available for Inspection Online at: http://www.in.gov/dnr/water/6472.htm City of Martinsville...

  18. 78 FR 8181 - Proposed Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-05

    ... panels of experts in hydrology, hydraulics, and other pertinent sciences established to review... Inspection Online at: http://www.in.gov/dnr/water/6476.htm City of Hartford City Blackford County Area... Online at: http://www.in.gov/dnr/water/5775.htm City of Carmel Department of Community Services, One...

  19. 77 FR 67016 - Proposed Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-08

    ... resolution process. SRPs are independent panels of experts in hydrology, hydraulics, and other pertinent... at: http://www.in.gov/dnr/water/6644.htm Town of Brookville Franklin County Government Center, Area...://www.in.gov/dnr/water/6415.htm Town of Liberty Union County Area Plan Commission, 6 West South Street...

  20. 78 FR 310 - Draft Revision of Guidance for Industry on Providing Regulatory Submissions in Electronic Format...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-03

    ...ApprovalProcess/FormsSubmissionRequirements/ElectronicSubmissions/ucm253101.htm , http://www.regulations.../Drugs/DevelopmentApprovalProcess/FormsSubmissionRequirements/ElectronicSubmissions/ucm253101.htm , http...), in a format that FDA can process, review, and archive. Currently, the Agency can process, review, and...

  1. Ultrathin efficient perovskite solar cells employing a periodic structure of a composite hole conductor for elevated plasmonic light harvesting and hole collection

    NASA Astrophysics Data System (ADS)

    Long, Mingzhu; Chen, Zefeng; Zhang, Tiankai; Xiao, Yubin; Zeng, Xiaoliang; Chen, Jian; Yan, Keyou; Xu, Jianbin

    2016-03-01

    We developed a molecule/polymer composite hole transporting material (HTM) with a periodic microstructure for morphology replication of a corrugated Au electrode, which in combination plays a dual role in the optical and electronic enhancement of high performance perovskite solar cells (PSCs). The electro-optics revealed that perovskite couldn't readily extinct the red light even though the thickness increased to 370 nm, but we found that the quasi periodic microstructure composite (PMC) HTM in combination with the conformal Au electrode could promote the absorption through the enhanced cavity effects, leading to comparable absorption even using much thinner perovskite (240 nm). We identified that the cavity was the combination of Fabry-Pérot interferometer and surface plasmonic resonance, with light harvesting enhancement through surface plasmon polariton or waveguide modes that propagate in the plane of the perovskite layer. On the other hand, the PMC HTM increased hole conductivity by one order of magnitude with respect to standard spiro-OMeTAD HTM due to molecular packing and self-assembly, embodying traceable hole mobility and density elevation up to 3 times, and thus the hysteresis was greatly avoided. Owing to dual optical and electronic enhancement, the PMC PSC afforded high efficiency PSC using as thin as 240 nm perovskite layer, delivering a Voc of 1.05 V, Jsc of 22.9 mA cm-2, FF of 0.736, and efficiency amounting to 17.7% PCE, the highest efficiency with ultrathin perovskite layer.We developed a molecule/polymer composite hole transporting material (HTM) with a periodic microstructure for morphology replication of a corrugated Au electrode, which in combination plays a dual role in the optical and electronic enhancement of high performance perovskite solar cells (PSCs). The electro-optics revealed that perovskite couldn't readily extinct the red light even though the thickness increased to 370 nm, but we found that the quasi periodic microstructure composite (PMC) HTM in combination with the conformal Au electrode could promote the absorption through the enhanced cavity effects, leading to comparable absorption even using much thinner perovskite (240 nm). We identified that the cavity was the combination of Fabry-Pérot interferometer and surface plasmonic resonance, with light harvesting enhancement through surface plasmon polariton or waveguide modes that propagate in the plane of the perovskite layer. On the other hand, the PMC HTM increased hole conductivity by one order of magnitude with respect to standard spiro-OMeTAD HTM due to molecular packing and self-assembly, embodying traceable hole mobility and density elevation up to 3 times, and thus the hysteresis was greatly avoided. Owing to dual optical and electronic enhancement, the PMC PSC afforded high efficiency PSC using as thin as 240 nm perovskite layer, delivering a Voc of 1.05 V, Jsc of 22.9 mA cm-2, FF of 0.736, and efficiency amounting to 17.7% PCE, the highest efficiency with ultrathin perovskite layer. Electronic supplementary information (ESI) available: XRD patterns corresponding to the perovskite; AFM images of 3D PMC HTM perovskite solar cells; performance statistics for 3D PMC HTM; ultraviolet photoelectron spectra (UPS) of HTMs on FTO. See DOI: 10.1039/c5nr05042a

  2. The equivalence of minimum entropy production and maximum thermal efficiency in endoreversible heat engines.

    PubMed

    Haseli, Y

    2016-05-01

    The objective of this study is to investigate the thermal efficiency and power production of typical models of endoreversible heat engines at the regime of minimum entropy generation rate. The study considers the Curzon-Ahlborn engine, the Novikov's engine, and the Carnot vapor cycle. The operational regimes at maximum thermal efficiency, maximum power output and minimum entropy production rate are compared for each of these engines. The results reveal that in an endoreversible heat engine, a reduction in entropy production corresponds to an increase in thermal efficiency. The three criteria of minimum entropy production, the maximum thermal efficiency, and the maximum power may become equivalent at the condition of fixed heat input.

  3. Heat Transfer Phenomena in Concentrating Solar Power Systems.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Armijo, Kenneth Miguel; Shinde, Subhash L.

    Concentrating solar power (CSP) utilizes solar thermal energy to drive a thermal power cycle for the generation of electricity. CSP systems are facilitated as large, centralized power plants , such as power towers and trough systems, to take advantage of ec onomies of scale through dispatchable thermal energy storage, which is a principle advantage over other energy generation systems . Additionally, the combination of large solar concentration ratios with high solar conversion efficiencies provides a strong o pportunity of employment of specific power cycles such as the Brayton gas cycle that utilizes super critical fluids such as supercritical carbon dioxidemore » (s CO 2 ) , compared to other sola r - fossil hybrid power plants. A comprehensive thermal - fluids examination is provided by this work of various heat transfer phenomena evident in CSP technologies. These include sub - systems and heat transfer fundamental phenomena evident within CSP systems , which include s receivers, heat transfer fluids (HTFs), thermal storage me dia and system designs , thermodynamic power block systems/components, as well as high - temperature materials. This work provides literature reviews, trade studies, and phenomenological comparisons of heat transfer media (HTM) and components and systems, all for promotion of high performance and efficient CSP systems. In addition, f urther investigations are also conducted that provide advanced heat transfer modeling approaches for gas - particle receiver systems , as well as performance/efficiency enhancement re commendations, particularly for solarized supercritical power systems .« less

  4. 40 CFR 1037.810 - Incorporation by reference.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... must publish a notice of the change in the Federal Register and the material must be available to the... software is also available for download at http://www.epa.gov/otaq/climate/gem.htm. (2) [Reserved] (d... working version of this software is also available for download at http://www.epa.gov/otaq/climate/gem.htm. ...

  5. 76 FR 55390 - Guidance on Exculpatory Language in Informed Consent, Draft

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-07

    ...://www.fda.gov/ScienceResearch/SpecialTopics/RunningClinicalTrials/default.htm , is intended to assist... , http://www.hhs.gov/ohrp/newsroom/rfc/index.html , or http://www.fda.gov/ScienceResearch/SpecialTopics/RunningClinicalTrials/default.htm . III. Request for Comments OHRP and FDA are making their joint draft...

  6. 78 FR 32676 - Changes in Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-31

    ... flood insurance premium rates for new buildings and the contents of those buildings. For rating purposes...://www.rampp-team.com/ September 23, 2013........ 050084 Springs (13-06- Ruth Carney, 111 Opera lomrs.htm... http://www.rampp-team.com/ July 25, 2013 340343 Hanover (12-02- Ronald F. Engineering lomrs.htm. 1077P...

  7. 77 FR 73490 - Proposed Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-10

    ... resolution process. SRPs are independent panels of experts in hydrology, hydraulics, and other pertinent...://www.in.gov/dnr/water/6573.htm City of Rising Sun City Hall, 200 North Walnut Street, Rising Sun, IN....in.gov/dnr/water/7357.htm Town of Gosport Town Hall, 13 South 3rd Street, Gosport, IN 47433. Town of...

  8. Addressing the Big-Earth-Data Variety Challenge with the Hierarchical Triangular Mesh

    NASA Technical Reports Server (NTRS)

    Rilee, Michael L.; Kuo, Kwo-Sen; Clune, Thomas; Oloso, Amidu; Brown, Paul G.; Yu, Honfeng

    2016-01-01

    We have implemented an updated Hierarchical Triangular Mesh (HTM) as the basis for a unified data model and an indexing scheme for geoscience data to address the variety challenge of Big Earth Data. We observe that, in the absence of variety, the volume challenge of Big Data is relatively easily addressable with parallel processing. The more important challenge in achieving optimal value with a Big Data solution for Earth Science (ES) data analysis, however, is being able to achieve good scalability with variety. With HTM unifying at least the three popular data models, i.e. Grid, Swath, and Point, used by current ES data products, data preparation time for integrative analysis of diverse datasets can be drastically reduced and better variety scaling can be achieved. In addition, since HTM is also an indexing scheme, when it is used to index all ES datasets, data placement alignment (or co-location) on the shared nothing architecture, which most Big Data systems are based on, is guaranteed and better performance is ensured. Moreover, our updated HTM encoding turns most geospatial set operations into integer interval operations, gaining further performance advantages.

  9. 2D black phosphorous nanosheets as a hole transporting material in perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Muduli, Subas Kumar; Varrla, Eswaraiah; Kulkarni, Sneha Avinash; Han, Guifang; Thirumal, Krishnamoorthy; Lev, Ovadia; Mhaisalkar, Subodh; Mathews, Nripan

    2017-12-01

    We demonstrate for the first-time liquid exfoliated few layers of 2D Black phosphorus (BP) nanosheets as a hole transporting material (HTM) for perovskite based solar cells. The photoelectron spectroscopy in air (PESA) measurements confirm the low laying valence band level of BP nanosheets (-5.2 eV) favourable for hole injection from CH3NH3PbI3 (MAPbI3). Our results show that ∼25% improvement in power conversion efficiency (PCE) of η = 16.4% for BP nanosheets + Spiro-OMeTAD as an HTM as compared to spiro-OMeTAD (η = 13.1%). When BP nanosheets are exclusively utilised as an HTM, a PCE of η = 7.88% is noted, an improvement over the 4% PCE values observed for HTM free devices. Photoluminescence (PL) quenching of MAPbI3 and impedance measurements further confirm the charge extraction ability of BP nanosheets. The structural and optical characterization of liquid exfoliated BP nanosheets is discussed in detail with the aid of transmission electron microscopy, Raman spectroscopy, absorption spectroscopy and photo-electron spectroscopy.

  10. Copolymers of poly(3-thiopheneacetic acid) with poly(3-hexylthiophene) as hole-transporting material for interfacially engineered perovskite solar cell by modulating band positions for higher efficiency.

    PubMed

    Shit, Arnab; Chal, Pousali; Nandi, Arun K

    2018-06-13

    In order to tune the band positions of the hole-transporting material (HTM) in an interfacially engineered perovskite solar cell (PSC), random copolymers of poly(3-thiopheneacetic acid) and poly(3-hexylthiophene) (P3TAA-co-P3HT) with different compositions were produced by oxidative polymerization. The copolymers were characterized using 1H NMR, FTIR, and UV-vis spectroscopy and gel permeation chromatography. Here, ZnO nanoparticles were used as the electron-transporting material (ETM) and methylammonium lead iodide (MAPbI3) perovskite was used as the light-absorbing material to form an FTO/ZnO/MAPbI3/copolymer/Ag device, of which the power conversion efficiency (PCE) was found to be dependent on the copolymer composition and reached a maximum (∼10%) at a P3TAA content of 43 mol% in the copolymer (P3). The band gaps of the copolymers as determined from UV-vis spectroscopy and cyclic voltammetry exhibit a staggered-gap hetero-interface configuration in which the HOMO and LUMO of P3 closely match those of MAPbI3 and give rise to the maximum PCE. Time-resolved photoluminescence spectra of MAPbI3/HTM samples indicate that charge transfer across the perovskite/copolymer interface was faster with a reduced recombination rate for a P3 sample. The electrochemical impedance spectra (EIS) of the PSCs exhibit Nyquist plots with two semicircles, which correspond to an equivalent circuit consisting of two parallel R-C and R-CPE circuits connected in series. Analysis of the data indicates that the effective electron lifetime was longest for the P3 copolymer, which indicates that the charge recombination was lower than that in the components and other copolymers. The copolymers exhibited an intermediate stability with respect to their components, and amongst the copolymers P3 exhibited the highest stability.

  11. Morphological changes and viability of primary cultured human ocular trabecular meshwork cells after exposure to air.

    PubMed

    Kopsachilis, Nikolaos; Tsaousis, Konstantinos T; Carifi, Gianluca; Welge-Luessen, Ulrich

    2014-06-01

    To investigate the possible toxic effect of air exposure for an in vitro model of primary human ocular trabecular meshwork cells (HTM). HTM were isolated from five donor eyes and cultivated at 37 °C. After reaching confluence the cells were seeded on two well chamber slides. The chamber slides were turned upside down in a Petri culture dish full of culture medium and filled with air using a 5 ml syringe, starting this way the exposure of the cells to the air. Subsequently they were placed in the incubation chamber at 37 °C. Six groups of HTM cultures were set up: group 1 consisted of samples in which HTM were exposed to air for 30 min, group 2 for 1 h, group 3 for 3 h, group 4 for 6 h, group 5 for 12 h and group 6 for 24 h. At 3 h after exposure, the morphology of the cells was still intact, at 6 h few cells appeared deformed and exhibited characteristics of more senescent cells. At 12 h after exposure to air the HTM cells started losing their typical morphology and appeared enlarged and compromised. Viability was superior to 94% in groups 1-3 while for groups 4, 5, 6 it was 82.7%, 39.5% and 12.7% respectively. The toxic effect of air exposure for the studied in vitro model of HTM is not significant for the time period of one to three hours. However it starts reducing viability and alternating morphology 6 h after exposure until the time period of 24 h, where the percentage of living cells is drastically decreased. Therefore, we suggest that the use of an air bubble especially in glaucomatous patients should be applied with caution. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Functionalized CdS quantum dots-based luminescence probe for detection of heavy and transition metal ions in aqueous solution.

    PubMed

    Chen, Jinlong; Zheng, Aifang; Gao, Yingchun; He, Chiyang; Wu, Genhua; Chen, Youcun; Kai, Xiaoming; Zhu, Changqing

    2008-03-01

    Strong luminescence CdS quantum dots (QDs) have been prepared and modified with l-cysteine by a facile seeds-assistant technique in water. They are water-soluble and highly stable in aqueous solution. CdS QDs evaluated as a luminescence probe for heavy and transition metal (HTM) ions in aqueous solution was systematically studied. Five HTM ions such as silver(I) ion, copper(II) ion, mercury(II) ion, cobalt(II) ion, and nickel(II) ion significantly influence the photophysics of the emission from the functionalized CdS QDs. Experiment results showed that the fluorescence emission from CdS QDs was enhanced significantly by silver ion without any spectral shift, while several other bivalent HTM ions, such as Hg(2+), Cu(2+), Co(2+), and Ni(2+), exhibited effective optical quenching effect on QDs. Moreover, an obvious red-shift of emission band was observed in the quenching of CdS QDs for Hg(2+) and Cu(2+) ions. Under the optimal conditions, the response was linearly proportional to the concentration of Ag(+) ion ranging from 1.25 x 10(-7) to 5.0 x 10(-6)molL(-1) with a detection limit of 2.0 x 10(-8)molL(-1). The concentration dependence of the quenching effect on functionalized QDs for the other four HTM ions could be well described by typical Stern-Volmer equation, with the linear response of CdS QDs emission proportional to the concentration ranging from 1.50 x 10(-8) to 7.50 x 10(-7)molL(-1) for Hg(2+) ion, 3.0 x 10(-7) to 1.0 x 10(-5)molL(-1) for Ni(2+) ion, 4.59 x 10(-8) to 2.295 x 10(-6)molL(-1) for Cu(2+) ion, and 1.20 x 10(-7) to 6.0 x 10(-6)molL(-1) Co(2+) ion, respectively. Based on the distinct optical properties of CdS QDs system with the five HTM ions, and the relatively wide linear range and rapid response to HTM ions, CdS QDs can be developed as a potential identified luminescence probe for familiar HTM ions detection in aqueous solution.

  13. The effect of trace mineral source and concentration on ruminal digestion and mineral solubility.

    PubMed

    Genther, O N; Hansen, S L

    2015-01-01

    The objective of this experiment was to compare the effect of sources of sulfate trace mineral (STM) and hydroxy trace mineral (HTM) at different inclusions on digestibility of dry matter (DM) and neutral detergent fiber and solubility of Cu, Mn, and Zn in the rumen and abomasum of cattle. Five ruminally cannulated steers were used in a 5×5 Latin square design and individually fed a corn silage-based diet on an ad libitum basis. The 5 dietary treatments were as follows: control: no supplemental Cu, Mn, or Zn, analyzed to contain 7.4mg of Cu, 30.8mg of Mn, and 32.1mg of Zn per kilogram of diet DM (CON); low sulfate: 5mg of Cu/kg of DM supplemented from CuSO4, 15mg of Mn/kg of DM from MnSO4, and 30mg of Zn/kg of DM from ZnSO4; low HTM: 5mg of Cu/kg of DM supplemented from basic copper chloride (IntelliBond C; Micronutrients Inc., Indianapolis, IN), 15mg of Mn/kg of DM from manganese hydroxychloride (IntelliBond M; Micronutrients Inc.), and 30mg of Zn/kg of DM from zinc hydroxychloride (IntelliBond Z; Micronutrients Inc.); high sulfate: 25mg of Cu/kg of DM supplemented from CuSO4, 60mg of Mn/kg of DM from MnSO4, and 120mg of Zn/kg of DM from ZnSO4; and high HTM: 25mg of Cu/kg of DM supplemented from basic copper chloride, 60mg of Mn/kg of DM from manganese hydroxychloride, and 120mg of Zn/kg of DM from zinc hydroxychloride. Periods lasted for 12d, with 10d of diet adaptation. Dacron bags containing the CON total mixed ration were inserted on d 11 at 0h and were removed at 6, 12, 24, and 36h after insertion. Dry matter and neutral detergent fiber disappearances and rumen and simulated abomasal trace mineral solubilities were evaluated. Dietary treatment did not affect DM intake. Dry matter disappearance was lesser in supplemental TM treatments and greater in CON than the STM treatments, although the CON and HTM treatments did not differ. Neutral detergent fiber disappearance was not affected by treatment. Ruminally soluble Cu and Mn concentrations were least in CON and were lesser in HTM-containing treatments compared with STM treatments. However, in the abomasum, solubilities of Cu and Mn were similar across trace mineral sources. Ruminal and simulated abomasal soluble Zn was greater in the HTM treatments than in CON and STM, driven by the greater solubility of the high HTM treatment. Under the conditions of this study, supplementing trace minerals as STM decreased DM digestibility, whereas HTM did not affect DM digestibility. Additionally, Cu and Mn from HTM sources were relatively insoluble in the rumen but had similar solubility as STM at the pH found in the abomasum, suggesting that these minerals should be available for absorption in the intestine. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  14. 75 FR 41121 - Hazardous and Solid Waste Management System; Identification and Listing of Special Wastes...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-07-15

    .../fossil/ccr-rule/ccr-form.htm . If you would like to present oral testimony and are unable to preregister... SUPPLEMENTARY INFORMATION for information on how to register. ADDRESSES: The public hearings will be held at the....gov/epawaste/nonhaz/industrial/special/fossil/ccr-rule/ccr-hearing.htm . Those persons planning to...

  15. Training a US Army Chemical Corps Company in the Current Operating Environment

    DTIC Science & Technology

    2009-02-20

    Recon Vehicle. http://www.globalsecurity.org/military/systems/ground/ iav - nbc.htm (accessed December 14, 2008). 5    in addition to his or her duties...systems/ground/ iav - nbc.htm (accessed December 14, 2008). Meyer, Josh. "Al Qaeda is said to focus again on WMD." Los Angeles Times, February 3, 2008: A

  16. 78 FR 36176 - Commission Information Collection Activities (FERC-551); Comment Request; Extension

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ...: Reporting of Flow Volume and Capacity by Interstate Natural Gas Pipelines. OMB Control No.: 1902-0243. Type... Code of Federal Regulations 1320.3. Type of Respondents: Interstate Natural Gas Pipelines. Estimate of...) ( http://bls.gov/oes/current/naics2_22.htm and http://www.bls.gov/news.release/ecec.nr0.htm ). Comments...

  17. 78 FR 20331 - Changes in Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-04

    ... flood insurance premium rates for new buildings and the contents of those buildings. For rating purposes............ 350070 (12-06-1488P). David Coss, Avenue, Santa Fe, team.com/lomrs.htm. Mayor, City of NM 87501. Santa Fe... Design http://www.rampp- May 28, 2013......... 405381 06-1019P). Dewey F. Office, 2317 team.com/lomrs.htm...

  18. Air Force’s Combat Aircraft: A Future Holding into the Past

    DTIC Science & Technology

    2010-04-07

    Global Security, “9M111 / SA-19 GRISON ,” Globalsecurity.org, http://www.globalsecurity.org/military/world/ russia/sa-19.htm (accessed March 13, 2010...world/russia/9k338.htm (assessed March 13, 2010). Global Security. “9M111 / SA-19 GRISON .” Globalsecurity.org. http://www.globalsecurity. org

  19. 50 CFR 622.14 - Area closures related to the Deepwater Horizon oil spill.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Web site: http://sero.nmfs.noaa.gov/deepwater_horizon_oil_spill.htm. (b) Gulf EEZ area closure related... the Gulf EEZ identified in the map shown on the NMFS Web site: http://sero.nmfs.noaa.gov/deepwater... shown on the NMFS Web site: http://sero.nmfs.noaa.gov/deepwater_horizon_oil_spill.htm. ...

  20. An Efficient Amphiphilic-Type Triphenylamine-Based Organic Hole Transport Material for High-Performance and Ambient-Stable Dopant-Free Perovskite and Organic Solar Cells.

    PubMed

    Reddy, Saripally Sudhaker; Park, Ho-Yeol; Kwon, Haeun; Shin, Jongmoon; Kim, Chang-Su; Song, Myungkwan; Jin, Sung-Ho

    2018-04-25

    A new set of simply structured triphenylamine-based small molecules are synthesized and evaluated as dopant-free hole transporting materials (HTMs) for high-performance perovskite solar cells (PSCs) and bulk heterojunction inverted organic solar cells (BHJ IOSCs). Surprisingly, the new amphiphilic-type HTM-1 (with internal hydrophilic groups and peripheral hydrophobic alkyl tails) showed better compatibility and performance than the actual target molecule, that is, HTM-2 in PSCs and BHJ IOSCs. Importantly, the HTM-1-based dopant-free PSCs and BHJ IOSCs exhibited high power conversion efficiencies (PCEs) of 11.45 % and 8.34 %, respectively. These performances are superior and comparable to those of standard HTMs Spiro-OMeTAD (2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene) and PEDOT:PSS (poly(3,4-ethylenedioxythiophene)/polystyrene sulfonate) in PSCs and BHJ IOSCs, respectively. The enhanced device performance of the HTM-1-based PSCs is ascribed to its strong affinity towards the perovskite, properly aligned energy levels with respect to the perovskite valence band, and excellent hole transporting behavior. In addition, the well-organized energy levels of the HTMs showed excellent compatibility in BHJ IOSCs. The new amphiphilic-type HTM-based photovoltaic devices also showed long-term air stability over 700 h. These promising results offer new and unexpected prospects for engineering the interface between the photoactive material and HTMs in PSCs and BHJ IOSCs. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. A District Approach to Countering Afghanistan’s Insurgency

    DTIC Science & Technology

    2009-12-01

    actualization. Abraham Maslow , A Theory of Human Motivation, 1943, http://psychclassics.yorku.ca/ Maslow /motivation.htm (accessed October 29, 2009...Lyon Press, 2002. Maslow , Abraham . A Theory of Human Motivation, 1943. http://psychclassics.yorku.ca/ Maslow /motivation.htm (accessed October 29...established village and district political hierarchies may effectively deny insurgents sanctuary, critical resources, and serve to isolate and separate the

  2. Maritime Trade Defense: Establishing the Joint Force Maritime Trade Component Commander

    DTIC Science & Technology

    2012-05-04

    GlobalSecurity.Org, "Sealift in World War II,” http://www.globalsecurity.org/military/systems/ship/sealift- ww2 .htm, (accessed 1 May 2012). 11 Ibid, 203. 12 David...military/systems/ship/sealift- ww2 .htm (accessed 1 May 2012). 19 Daniel Y. Coulter, "Globalization of Maritime Commerce: The Rise of Hub Ports," in

  3. Enhanced photocurrent density of HTM-free perovskite solar cells by carbon quantum dots

    NASA Astrophysics Data System (ADS)

    Zou, Haiyuan; Guo, Daipeng; He, Bowen; Yu, Jiaguo; Fan, Ke

    2018-02-01

    Full-printable and hole transport material (HTM)-free perovskite solar cells (PSCs) with carbon counter electrodes feature high stability and low cost. However, the perovskite film prepared by conventional one-step solution-coating method always shows a relatively poor coverage on the substrate, leading to the limit of the photocurrent density. In this study, we incorporated carbon quantum dots (CQDs) in the perovskite films, and investigated their effects on the performance of TiO2 nanosheet-based and HTM-free PSCs. It was found that the addition of CQDs to the perovskite film can enhance the photocurrent density of PSCs, and the optimal PSC with 0.1% CQDs evolved 60% higher photocurrent density than the pristine one. The improved photocurrent density was attributed to the heterogeneous nuclei derived from CQDs during perovskite crystallization, which would increase amount of perovskite nuclei and form a fine perovskite grain, leading to a better coverage on the substrate. Moreover, due to the excellent conductivity, CQDs in perovskite films could efficiently transport the photo-excited electrons, accelerating the separation and mobilization of charge carriers. This study presents the incorporation of CQDs in perovskite as an efficient approach to promote the performance of HTM-free PSCs.

  4. MPLM Donatello is offloaded at the SLF

    NASA Technical Reports Server (NTRS)

    2001-01-01

    At the Shuttle Landing Facility, cranes are poised to help offload the Italian Space Agency's Multi- Purpose Logistics Module Donatello from the Airbus '''Beluga''' air cargo plane that brought it from the factory of Alenia Aerospazio in Turin, Italy. The third of three for the International Space Station, the module will be transported to the Space Station Processing Facility for processing. Among the activities for the payload test team are integrated electrical tests with other Station elements in the SSPF, leak tests, electrical and software compatibility tests with the Space Shuttle (using the Cargo Integrated Test equipment) and an Interface Verification Test once the module is installed in the Space Shuttle's payload bay at the launch pad. The most significant mechanical task to be performed on Donatello in the SSPF is the installation and outfitting of the racks for carrying the various experiments and cargo.

  5. The Role of Experiential Learning in Nurturing Management Competencies in Hospitality and Tourism Management Students: Perceptions from Students, Faculty, and Industry Professionals

    ERIC Educational Resources Information Center

    Jack, Kristen

    2011-01-01

    Previous research has revealed that industry professionals and educators in the field of Hospitality and Tourism Management (HTM) agree that classroom theory and experience in the field are essential components of undergraduate HTM education. Yet there is some disagreement on internship hour requirements, and limited data on actual outcomes. This…

  6. 77 FR 14972 - Discrimination on the Basis of Disability in Federally Assisted Programs and Activities

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-14

    ...'s ADA Web site contains links to HTML and PDF versions at www.ada.gov/regs2010/ADAregs2010.htm . \\15... Transportation Barriers Compliance Board) in 1991 (1991 ADAAG). DOJ's ADA Web site contains links to HTML and PDF.../2010ADAstandards_index.htm . There are links to HTML, PDF screen, and PDF print versions of the 2010 Standards and...

  7. Adding Nonlinear Tools to the Strategist’s Toolbox

    DTIC Science & Technology

    2001-06-01

    between interests. Idealists base their arguments on the pioneers like Hugo Grotius (1583-1645) and Immanuel Kant (1724-1804). The Idealist school based...12Blupete, [website]: available from http://www.blupete.com/Literature/ Biographies / Philosophy/Popper.htm; Internet. 13Glesne and Peshkin, 24. 39...www.blupete.com/Literature/ Biographies / Philosophy/Popper.htm. Internet. Dean Robbins, Brent. Mythos and Logos. Available from http://www.geocities.com/ Athens

  8. Cellular Fibronectin Expression in Human Trabecular Meshwork and Induction by Transforming Growth Factor-β2

    PubMed Central

    Medina-Ortiz, Wanda E.; Belmares, Ricardo; Neubauer, Sandra; Wordinger, Robert J.; Clark, Abbot F.

    2013-01-01

    Purpose. Levels of TGF-β2 are higher in POAG aqueous humor, causing deposition of extracellular matrix (ECM) proteins, including fibronectin (FN), in the glaucomatous human trabecular meshwork (HTM) that may be responsible for elevated IOP. The purpose of this study was to identify the expression of cellular FN (cFN) isoforms (EDA and EDB) in HTM cells and tissues, and to determine whether TGF-β2 can induce cFN expression and fibril formation in cultured HTM cells. Methods. Expression of cFN mRNA isoforms and induction by recombinant TGF-β2 (5 ng/mL) were determined by quantitative RT-PCR. The TGF-β2 induction of EDA isoform protein expression and FN fibril formation were analyzed using Western immunoblots and immunocytochemistry (ICC), respectively. Immunohistochemistry (IHC) analysis was used to examine total FN and EDA isoform expression in normal (NTM) and glaucomatous (GTM) trabecular meshwork (TM) tissues. Results. Both cFN mRNA isoforms were expressed in cultured HTM cells and were induced by TGF-β2 after 2, 4, and 7 days (P < 0.05). Similarly, EDA isoform protein and fibril formation were increased after 4 and 7 days of TGF-β2 treatment. Finally, GTM tissues had significantly greater EDA isoform protein levels (1.7-fold, P < 0.05) compared to NTM tissues. Conclusions. This study demonstrated that cFN isoforms are expressed and induced in HTM cells by TGF-β2. Also, increased EDA isoform protein levels were seen in GTM tissues. Our findings suggest that induction of cFN isoform expression in the TM ECM may be a novel pathologic mechanism involved in the TM changes associated with glaucoma. PMID:24030464

  9. Estimating Human Trabecular Meshwork Stiffness by Numerical Modeling and Advanced OCT Imaging.

    PubMed

    Wang, Ke; Johnstone, Murray A; Xin, Chen; Song, Shaozhen; Padilla, Steven; Vranka, Janice A; Acott, Ted S; Zhou, Kai; Schwaner, Stephen A; Wang, Ruikang K; Sulchek, Todd; Ethier, C Ross

    2017-09-01

    The purpose of this study was to estimate human trabecular meshwork (hTM) stiffness, thought to be elevated in glaucoma, using a novel indirect approach, and to compare results with direct en face atomic force microscopy (AFM) measurements. Postmortem human eyes were perfused to measure outflow facility and identify high- and low-flow regions (HF, LF) by tracer. Optical coherence tomography (OCT) images were obtained as Schlemm's canal luminal pressure was directly manipulated. TM stiffness was deduced by an inverse finite element modeling (FEM) approach. A series of AFM forcemaps was acquired along a line traversing the anterior angle on a radially cut flat-mount corneoscleral wedge with TM facing upward. The elastic modulus of normal hTM estimated by inverse FEM was 70 ± 20 kPa (mean ± SD), whereas glaucomatous hTM was slightly stiffer (98 ± 19 kPa). This trend was consistent with TM stiffnesses measured by AFM: normal hTM stiffness = 1.37 ± 0.56 kPa, which was lower than glaucomatous hTM stiffness (2.75 ± 1.19 kPa). None of these differences were statistically significant. TM in HF wedges was softer than that in LF wedges for both normal and glaucomatous eyes based on the inverse FEM approach but not by AFM. Outflow facility was significantly correlated with TM stiffness estimated by FEM in six human eyes (P = 0.018). TM stiffness is higher, but only modestly so, in glaucomatous patients. Outflow facility in both normal and glaucomatous human eyes appears to associate with TM stiffness. This evidence motivates further studies to investigate factors underlying TM biomechanical property regulation.

  10. Testing of Streptococcus pneumoniae for resistance to penicillin.

    PubMed Central

    Marshall, K J; Musher, D M; Watson, D; Mason, E O

    1993-01-01

    The increasing prevalence of penicillin-resistant Streptococcus pneumoniae requires antibiotic susceptibility tests that can be done with greater ease and reliability. We measured the MIC of penicillin for pneumococci by the tube macrodilution method with Mueller-Hinton broth (MHB), Haemophilus Test Medium (HTM), Todd-Hewitt broth with 0.5% yeast extract (THY), and MHB with 3% lysed horse blood (LHB). Eight (19%) and 6 (14%) of 42 pneumococcal isolates failed to generate turbid growth in MHB and HTM, respectively, whereas all pneumococcal isolates did so in THY and LHB. For those strains that replicated to turbidity, the mean MICs of penicillin were lower in MHB and HTM than in THY and LHB, with differences being significant (P < 0.05) for comparisons with LHB. Four isolates appeared to be penicillin susceptible in HTM but were actually moderately resistant in THY and LHB, and two isolates appeared to be moderately resistant but were resistant. A similar failure to detect resistance was seen with MHB. S. pneumoniae ATCC 49619, a moderately penicillin-resistant strain that has been proposed for quality control testing, gave variable results in MHB or THM and appeared to be susceptible to penicillin in some assays, whereas the MICs for S. pneumoniae ATCC 49619 in THY or LHB fell within a twofold dilution range, with geometric means of 0.16 and 0.18 micrograms/ml, respectively. Pneumococcal isolates thus may appear falsely susceptible to penicillin when tested in MHB or HTM. LHB remains the standard medium; however, because THY is an easily prepared clear medium that can be used in automated systems and appears to yield results similar to those obtained with LHB, THY deserves consideration for routine use. PMID:8501225

  11. Hole-Transport Materials for Perovskite Solar Cells.

    PubMed

    Calió, Laura; Kazim, Samrana; Grätzel, Michael; Ahmad, Shahzada

    2016-11-14

    The pressure to move towards renewable energy has inspired researchers to look for ideas in photovoltaics that may lead to a major breakthrough. Recently the use of perovskites as a light harvester has lead to stunning progress. The power conversion efficiency of perovskite solar cells is now approaching parity (>22 %) with that of the established technology which took decades to reach this level of performance. The use of a hole transport material (HTM) remains indispensable in perovskite solar cells. Perovskites can conduct holes, but they are present at low levels, and for efficient charge extraction a HTM layer is a prerequisite. Herein we provide an overview of the diverse types of HTM available, from organic to inorganic, in the hope of encouraging further research and the optimization of these materials. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Methane turnover and environmental change from Holocene biomarker records in a thermokarst lake in Arctic Alaska

    USGS Publications Warehouse

    Elvert, Marcus; Pohlman, John; Becker, Kevin W.; Gaglioti, Benjamin V.; Hinrichs, Kai-Uwe; Wooller, Matthew J.

    2016-01-01

    Arctic lakes and wetlands contribute a substantial amount of methane to the contemporary atmosphere, yet profound knowledge gaps remain regarding the intensity and climatic control of past methane emissions from this source. In this study, we reconstruct methane turnover and environmental conditions, including estimates of mean annual and summer temperature, from a thermokarst lake (Lake Qalluuraq) on the Arctic Coastal Plain of northern Alaska for the Holocene by using source-specific lipid biomarkers preserved in a radiocarbon-dated sediment core. Our results document a more prominent role for methane in the carbon cycle when the lake basin was an emergent fen habitat between ~12,300 and ~10,000 cal yr BP, a time period closely coinciding with the Holocene Thermal Maximum (HTM) in North Alaska. Enhanced methane turnover was stimulated by relatively warm temperatures, increased moisture, nutrient supply, and primary productivity. After ~10,000 cal yr BP, a thermokarst lake with abundant submerged mosses evolved, and through the mid-Holocene temperatures were approximately 3°C cooler. Under these conditions, organic matter decomposition was attenuated, which facilitated the accumulation of submerged mosses within a shallower Lake Qalluuraq. Reduced methane assimilation into biomass during the mid-Holocene suggests that thermokarst lakes are carbon sinks during cold periods. In the late-Holocene from ~2700 cal yr BP to the most recent time, however, temperatures and carbon deposition rose and methane oxidation intensified, indicating that more rapid organic matter decomposition and enhanced methane production could amplify climate feedback via potential methane emissions in the future.

  13. 2008 U.S. Coast Guard Innovation Expo

    DTIC Science & Technology

    2008-11-20

    for Capability (CG-7) Public Release Authorized DCO Outcomes • Mission Performance Plans, policies, strategic analysis and planning, assessments and...Untitled Document 2008 U.S.htm[5/26/ 2016 2:24:38 PM] 2008 U.S. Coast Guard Innovation Expo “Collaboration Fuels Innovation” Virginia Beach, Virginia...Untitled Document 2008 U.S.htm[5/26/ 2016 2:24:38 PM] Panelists: Mr. Tom Tomaiko, Maritime Security Program Manager, Borders and Maritime Security

  14. Effects of various media on the activity of NXL103 (formerly XRP 2868), a new oral streptogramin, against Haemophilus influenzae.

    PubMed

    Pankuch, Glenn A; Hoellman, Dianne; Bryskier, André; Lowther, John; Appelbaum, Peter C

    2006-11-01

    The activity of NXL103 against 108 strains of Haemophilus influenzae was tested using Haemophilus test media (HTM) obtained from various sources. With the exception of those obtained with stored HTM, MICs did not differ significantly, with MIC(50) and MIC(90) values of 0.5 and 0.5 to 1 microg/ml, respectively, in each medium.

  15. Peacekeeping/Stabilization and Conflict Transitions: Background and Congressional Action on the Civilian Response/Reserve Corps and Other Civilian Stabilization and Reconstruction Capabilities

    DTIC Science & Technology

    2009-02-05

    Peace Operations. February 24, 2000 http://www.fas.org/irp/ offdocs/pdd/pdd-71-4.htm, hereafter referred to as PDD-71 White Paper; and U.S. Text ... Summary of Presidential Decision Directive 71, http://www.fas.org/irp/offdocs/pdd/pdd-71-1.htm. 8 See CRS Report RL32321, Policing in Peacekeeping and

  16. Dynamic electronic institutions in agent oriented cloud robotic systems.

    PubMed

    Nagrath, Vineet; Morel, Olivier; Malik, Aamir; Saad, Naufal; Meriaudeau, Fabrice

    2015-01-01

    The dot-com bubble bursted in the year 2000 followed by a swift movement towards resource virtualization and cloud computing business model. Cloud computing emerged not as new form of computing or network technology but a mere remoulding of existing technologies to suit a new business model. Cloud robotics is understood as adaptation of cloud computing ideas for robotic applications. Current efforts in cloud robotics stress upon developing robots that utilize computing and service infrastructure of the cloud, without debating on the underlying business model. HTM5 is an OMG's MDA based Meta-model for agent oriented development of cloud robotic systems. The trade-view of HTM5 promotes peer-to-peer trade amongst software agents. HTM5 agents represent various cloud entities and implement their business logic on cloud interactions. Trade in a peer-to-peer cloud robotic system is based on relationships and contracts amongst several agent subsets. Electronic Institutions are associations of heterogeneous intelligent agents which interact with each other following predefined norms. In Dynamic Electronic Institutions, the process of formation, reformation and dissolution of institutions is automated leading to run time adaptations in groups of agents. DEIs in agent oriented cloud robotic ecosystems bring order and group intellect. This article presents DEI implementations through HTM5 methodology.

  17. Green-Solvent-Processable, Dopant-Free Hole-Transporting Materials for Robust and Efficient Perovskite Solar Cells.

    PubMed

    Lee, Junwoo; Malekshahi Byranvand, Mahdi; Kang, Gyeongho; Son, Sung Y; Song, Seulki; Kim, Guan-Woo; Park, Taiho

    2017-09-06

    In addition to having proper energy levels and high hole mobility (μ h ) without the use of dopants, hole-transporting materials (HTMs) used in n-i-p-type perovskite solar cells (PSCs) should be processed using green solvents to enable environmentally friendly device fabrication. Although many HTMs have been assessed, due to the limited solubility of HTMs in green solvents, no green-solvent-processable HTM has been reported to date. Here, we report on a green-solvent-processable HTM, an asymmetric D-A polymer (asy-PBTBDT) that exhibits superior solubility even in the green solvent, 2-methylanisole, which is a known food additive. The new HTM is well matched with perovskites in terms of energy levels and attains a high μ h (1.13 × 10 -3 cm 2 /(V s)) even without the use of dopants. Using the HTM, we produced robust PSCs with 18.3% efficiency (91% retention after 30 days without encapsulation under 50%-75% relative humidity) without dopants; with dopants (bis(trifluoromethanesulfonyl) imide and tert-butylpyridine, a 20.0% efficiency was achieved. Therefore, it is a first report for a green-solvent-processable hole-transporting polymer, exhibiting the highest efficiencies reported so far for n-i-p devices with and without the dopants.

  18. Impact of the Choice of Normalization Method on Molecular Cancer Class Discovery Using Nonnegative Matrix Factorization.

    PubMed

    Yang, Haixuan; Seoighe, Cathal

    2016-01-01

    Nonnegative Matrix Factorization (NMF) has proved to be an effective method for unsupervised clustering analysis of gene expression data. By the nonnegativity constraint, NMF provides a decomposition of the data matrix into two matrices that have been used for clustering analysis. However, the decomposition is not unique. This allows different clustering results to be obtained, resulting in different interpretations of the decomposition. To alleviate this problem, some existing methods directly enforce uniqueness to some extent by adding regularization terms in the NMF objective function. Alternatively, various normalization methods have been applied to the factor matrices; however, the effects of the choice of normalization have not been carefully investigated. Here we investigate the performance of NMF for the task of cancer class discovery, under a wide range of normalization choices. After extensive evaluations, we observe that the maximum norm showed the best performance, although the maximum norm has not previously been used for NMF. Matlab codes are freely available from: http://maths.nuigalway.ie/~haixuanyang/pNMF/pNMF.htm.

  19. Characterization and Fate of Gun and Rocket Propellant Residues on Testing and Training Ranges

    DTIC Science & Technology

    2008-01-01

    ext/reg_e.html. 36. United States Environmental Protection Agency (2007) Integrated Risk Information System: Hydrogen cyanide, http://www.epa.gov/ iris ...Environmental Protection Agency (2007) Integrated Risk Information System: Benzene, http://www.epa.gov/ iris /subst/0276.htm 42. United States Environmental...Protection Agency (2007) Integrated Risk Information System: Toluene, http://www.epa.gov/ iris /subst/0118.htm. 43. National Library of Medicine’s TOXNET

  20. Effects of Various Media on the Activity of NXL103 (Formerly XRP 2868), a New Oral Streptogramin, against Haemophilus influenzae

    PubMed Central

    Pankuch, Glenn A.; Hoellman, Dianne; Bryskier, André; Lowther, John; Appelbaum, Peter C.

    2006-01-01

    The activity of NXL103 against 108 strains of Haemophilus influenzae was tested using Haemophilus test media (HTM) obtained from various sources. With the exception of those obtained with stored HTM, MICs did not differ significantly, with MIC50 and MIC90 values of 0.5 and 0.5 to 1 μg/ml, respectively, in each medium. PMID:17065630

  1. Rational design of dipolar chromophore as an efficient dopant-free hole-transporting material for perovskite solar cells

    DOE PAGES

    Li, Zhong’an; Zhu, Zonglong; Chueh, Chu -Chen; ...

    2016-08-23

    In this paper, an electron donor-acceptor (D-A) substituted dipolar chromophore ( BTPA-TCNE) is developed to serve as an efficient dopant-free hole-transporting material (HTM) for perovskite solar cells (PVSCs). BTPA-TCNE is synthesized via a simple reaction between a triphenylamine-based Michler’s base and tetracyanoethylene. This chromophore possesses a zwitterionic resonance structure in the ground state, as evidenced by X-ray crystallography and transient absorption spectroscopies. Moreover, BTPA-TCNE shows an antiparallel molecular packing (i.e., centrosymmetric dimers) in its crystalline state, which cancels out its overall molecular dipole moment to facilitate charge transport. Finally, BTPA-TCNE can be employed as an effective dopant-free HTM to realizemore » an efficient (PCE ≈ 17.0%) PVSC in the conventional n-i-p configuration, outperforming the control device with doped spiro-OMeTAD HTM.« less

  2. Analyzing Patents Generated by SBIR Firms

    DTIC Science & Technology

    2014-04-30

    ac/ido/oeip/ taf /us_gov.htm   ^Åèìáëáíáçå=oÉëÉ~êÅÜ=mêçÖê~ãW= `êÉ~íáåÖ=póåÉêÖó=Ñçê=fåÑçêãÉÇ=`Ü~åÖÉ= = - 392 - A 2006 RAND report on the DoD SBIR...ac/ido/oeip/ taf /reports.htm#misc_info ^Åèìáëáíáçå=oÉëÉ~êÅÜ=mêçÖê~ãW= `êÉ~íáåÖ=póåÉêÖó=Ñçê=fåÑçêãÉÇ=`Ü~åÖÉ= = - 400 - patent protection and are...view of the many variations which may occur in corporate identifications. http://www.uspto.gov/web/offices/ac/ido/oeip/ taf /topo_04.htm#Desc 16

  3. What Are We Missing A Call for Red Teaming Within the Domestic Maritime Domain for Anti-Terrorism Programs

    DTIC Science & Technology

    2015-12-01

    Sherman Kent Center, Central Intelligence Agency 3, no. 2 (October 2004), https://www.cia.gov/ library /kent-center-occasional-papers/vol3no2.htm...Naval Intelligence (Norfolk, VA: Naval Warfare Development Command, 2008), http://www.nwdc.navy.mil/content/ Library /Documents/NDPs/ ndp2/ndp20007.htm...Fathali M. Moghaddam, “ Multiculturalism and Intergroup Relations,” American Psychological Association, November 2011, 95. 114 Matherly, The Red Teaming

  4. Measuring Cultural Change - A Management Focused Approach To Improving The Safety Culture

    DTIC Science & Technology

    2002-05-01

    draws, and areas of potential harm for the patient Improved communication for the entire health care team. Cost saving with a heighten awareness of all...www.ama-assn.org/sci- pubs/amnews/pick_01/prsb0312.htm. Agency for Health Care Research and Quality, (2002). Patient fact sheet: five steps to...safer health care. Retrieved 25 March 2002 from the World Wide Web at: http://www.ahrq.gov/ consumer /5steps.htm. American Hospital Association

  5. A pilot study: the effect of healing touch on anxiety, stress, pain, pain medication usage, and physiological measures in hospitalized sickle cell disease adults experiencing a vaso-occlusive pain episode.

    PubMed

    Thomas, Linda S; Stephenson, Nancy; Swanson, Mel; Jesse, D Elizabeth; Brown, Sylvia

    2013-12-01

    This pilot study was conducted to determine the effectiveness of Healing Touch on anxiety, stress, pain, pain medication usage, and selected physiological measures of hospitalized adults with sickle cell disease experiencing a vaso-occlusive pain episode. Healing Touch sessions were administered for 30 minutes on four consecutive days, and the self-reported data on anxiety, stress, pain, and the selected physiological data were collected while controlling for music and presence. A parallel-group randomized control trial comparing the effects of Healing Touch with Music (HTM) to Attention Control with Music (ACM). Due to the small sample size, there were no statistically significant changes in any between-group comparisons, except for present pain on Day 4 for the ACM group. For both groups, the within-group comparison showed a nonsignificant reduction in physiological parameters, a statistically significant reduction in anxiety and stress for the ACM group after Day 4, and a statistically significant reduction in stress in the HTM group after Days 2 and 4. The pre- to postintervention reductions in present pain were greater in the HTM group across all 4 days, but the only statistically significant within groups findings were in the HTM group (p < .01) on Day 1. Further research is needed.

  6. Health technopole: innovation applied to clinical engineering & health technology management education.

    PubMed

    Vilcahuaman, L; Rivas, R

    2010-01-01

    In the Peruvian Health System, Clinical Engineering does not exist as a topic of intervention. 59% of biomedical equipment is officially classified as operational, however next to apply the correct classification methodology and include security issues, only 10% of the equipment are suitable for use in patients. The serious consequences for patients, is opposite to the increased public investment in the health sector. Reversing this context leads to structural changes at all levels of the organization and they will be achievable only through an appropriate educational program. A strategy focused on joint of capacities called Health Technopole has managed to implement an innovative Model of Education in Healthcare Technology Management HTM and Clinical Engineering CE aimed at solving this problem. The proposal focused on strategies to strengthen the educational goals such as creating HTM & CE Units in hospitals, the implementation of the methodology: Problem Based Learning and Project Management in HTM & CE in classroom and on line courses. The process includes an effective interaction with global organizations through teleconferences, Internships, Workshops and Seminars. A key component was the sustained multidisciplinary approach. Health Technopole CENGETS is an expert adviser for the Ministry of Health and is called for trainings, design training programs for regional governments and also supports global organizations such as PAHO / WHO and ORAS / CONHU. The proposal of innovation applied to HTM & CE Education is effective and is a benchmark for similar countries.

  7. Enhancing Perovskite Solar Cell Performance by Interface Engineering Using CH3NH3PbBr0.9I2.1 Quantum Dots.

    PubMed

    Cha, Mingyang; Da, Peimei; Wang, Jun; Wang, Weiyi; Chen, Zhanghai; Xiu, Faxian; Zheng, Gengfeng; Wang, Zhong-Sheng

    2016-07-13

    To improve the interfacial charge transfer that is crucial to the performance of perovskite solar cells, the interface engineering in a device should be rationally designed. Here we have developed an interface engineering method to tune the photovoltaic performance of planar-heterojunction perovskite solar cells by incorporating MAPbBr3-xIx (MA = CH3NH3) quantum dots (QDs) between the MAPbI3 perovskite film and the hole-transporting material (HTM) layer. By adjustment of the Br:I ratio, the as-synthesized MAPbBr3-xIx QDs show tunable fluorescence and band edge positions. When the valence band (VB) edge of MAPbBr3-xIx QDs is located below that of the MAPbI3 perovskite, the hole transfer from the MAPbI3 perovskite film to the HTM layer is hindered, and hence, the power conversion efficiency decreases. In contrast, when the VB edge of MAPbBr3-xIx QDs is located between the VB edge of the MAPbI3 perovskite film and the highest occupied molecular orbital of the HTM layer, the hole transfer from the MAPbI3 perovskite film to the HTM layer is well-facilitated, resulting in significant improvements in the fill factor, short-circuit photocurrent, and power conversion efficiency.

  8. 9 CFR 318.303 - Critical factors and the application of the process schedule.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... container; (3) Container orientation during thermal processing; (4) Product formulation; (5) Particle size; (6) Maximum thickness for flexible, and to some extent semirigid containers during thermal processing; (7) Maximum pH; (8) Percent salt; (9) Ingoing (or formulated) nitrite level (ppm); (10) Maximum water...

  9. Reducing hole transporter use and increasing perovskite solar cell stability with dual-role polystyrene microgel particles.

    PubMed

    Chen, Mu; Mokhtar, Muhamad Z; Whittaker, Eric; Lian, Qing; Hamilton, Bruce; O'Brien, Paul; Zhu, Mingning; Cui, Zhengxing; Haque, Saif A; Saunders, Brian R

    2017-07-20

    Perovskite solar cells (PSCs) are a disruptive technology that continues to attract considerable attention due to their remarkable and sustained power conversion efficiency increase. Improving PSC stability and reducing expensive hole transport material (HTM) usage are two aspects that are gaining increased attention. In a new approach, we investigate the ability of insulating polystyrene microgel particles (MGs) to increase PSC stability and replace the majority of the HTM phase. MGs are sub-micrometre crosslinked polymer particles that swell in a good solvent. The MGs were prepared using a scalable emulsion polymerisation method. Mixed HTM/MG dispersions were subsequently spin-coated onto PSCs and formed composite HTM-MG layers. The HTMs employed were poly(triaryl amine) (PTAA), poly(3-hexylthiophene) (P3HT) and Spiro-MeOTAD (Spiro). The MGs formed mechanically robust composite HTMs with PTAA and P3HT. In contrast, Spiro-MG composites contained micro-cracks due the inability of the relatively small Spiro molecules to interdigitate. The efficiencies for the PSCs containing PTAA-MG and P3HT-MG decreased by only ∼20% compared to control PSCs despite PTAA and P3HT being the minority phases. They occupied only ∼35 vol% of the composite HTMs. An unexpected finding from the study was that the MGs dispersed well within the PTAA matrix. This morphology aided strong quenching of the CH 3 NH 3 PbI 3-x Cl x fluorescence. In addition, the open circuit voltages for the PSCs prepared using P3HT-MG increased by ∼170 mV compared to control PSCs. To demonstrate their versatility the MGs were also used to encapsulate P3HT-based PSCs. Solar cell stability data for the latter as well as those for PSCs containing composite HTM-MG were both far superior compared to data measured for a control PSC. Since MGs can reduce conjugated polymer use and increase stability they have good potential as dual-role PSC additives.

  10. The Strategic Importance of Defeating Underground Facilities

    DTIC Science & Technology

    2012-03-20

    German Submarine Pens: October 1942-April 1945,‖ December 7, 2010. http://www.usaaf.net/ ww2 /uboats/uboatspg6.htm (accessed 10 December 2011) 48...1945,‖ December 7, 2010. http://www.usaaf.net/ ww2 /uboats/uboatspg6.htm (accessed 10 December 2011). 51 Bradham, Hitler’s U-Boat Fortresses, 55. 52...The U.S. Army Air Forces in World War II, ―Bombing German Submarine Pens: October 1942-April 1945,‖ December 7, 2010. http://www.usaaf.net/ ww2

  11. Ethnic Conflict in Indonesia: Causes and Recommended Measures

    DTIC Science & Technology

    2005-12-01

    prepared to celebrate Hari Raya Idul Fitri, a holy day for Moslems throughout the world. Before that, at the end of 1998 certain scattered occurrences of...op. cit., p. 34. 132 Haris Azhar and Syamsul Alam Agus. “Poso: An Area Put to Conflict.” <file://F:\\Poso An Area Put to Conflict.htm> (accessed...Paper-04/0. Jakarta, 2004. Azhar, Haris , and Alam Agus Syamsul. “Poso: An Area Put to Conflict.” <file://F:\\Poso AnAreaPuttoConflict.htm> (accessed

  12. Refractive Conditions of Amazon Environment and Its Effects on Ground and Airborne Radar and ESM Systems

    DTIC Science & Technology

    2003-09-01

    superrefraction and trapping layers (the last one forming ducts) were investigated , as well as multiple layers. The multiple layers studied were made by 18...and Surveillance for the Amazon. Avionics Magazine of June 2002, from: http://www.aviationtoday.com/reports/avionics/previous/0602/0602sivam.htm...2003. Fisch, G., Marengo, J. A., & Nobre, C. A. Climate in Amazonia . From: http://www.mct.gov.br/clima/ingles/comunic_old/cinpe03.htm accessed in

  13. Towards Extending Forward Kinematic Models on Hyper-Redundant Manipulator to Cooperative Bionic Arms

    NASA Astrophysics Data System (ADS)

    Singh, Inderjeet; Lakhal, Othman; Merzouki, Rochdi

    2017-01-01

    Forward Kinematics is a stepping stone towards finding an inverse solution and subsequently a dynamic model of a robot. Hence a study and comparison of various Forward Kinematic Models (FKMs) is necessary for robot design. This paper deals with comparison of three FKMs on the same hyper-redundant Compact Bionic Handling Assistant (CBHA) manipulator under same conditions. The aim of this study is to project on modeling cooperative bionic manipulators. Two of these methods are quantitative methods, Arc Geometry HTM (Homogeneous Transformation Matrix) Method and Dual Quaternion Method, while the other one is Hybrid Method which uses both quantitative as well as qualitative approach. The methods are compared theoretically and experimental results are discussed to add further insight to the comparison. HTM is the widely used and accepted technique, is taken as reference and trajectory deviation in other techniques are compared with respect to HTM. Which method allows obtaining an accurate kinematic behavior of the CBHA, controlled in the real-time.

  14. Rational Design of Molecular Hole-Transporting Materials for Perovskite Solar Cells: Direct versus Inverted Device Configurations.

    PubMed

    Grisorio, Roberto; Iacobellis, Rosabianca; Listorti, Andrea; De Marco, Luisa; Cipolla, Maria Pia; Manca, Michele; Rizzo, Aurora; Abate, Antonio; Gigli, Giuseppe; Suranna, Gian Paolo

    2017-07-26

    Due to a still limited understanding of the reasons making 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD) the state-of-the-art hole-transporting material (HTM) for emerging photovoltaic applications, the molecular tailoring of organic components for perovskite solar cells (PSCs) lacks in solid design criteria. Charge delocalization in radical cationic states can undoubtedly be considered as one of the essential prerequisites for an HTM, but this aspect has been investigated to a relatively minor extent. In marked contrast with the 3-D structure of Spiro-OMeTAD, truxene-based HTMs Trux1 and Trux2 have been employed for the first time in PSCs fabricated with a direct (n-i-p) or inverted (p-i-n) architecture, exhibiting a peculiar behavior with respect to the referential HTM. Notwithstanding the efficient hole extraction from the perovskite layer exhibited by Trux1 and Trux2 in direct configuration devices, their photovoltaic performances were detrimentally affected by their poor hole transport. Conversely, an outstanding improvement of the photovoltaic performances in dopant-free inverted configuration devices compared to Spiro-OMeTAD was recorded, ascribable to the use of thinner HTM layers. The rationalization of the photovoltaic performances exhibited by different configuration devices discussed in this paper can provide new and unexpected prospects for engineering the interface between the active layer of perovskite-based solar cells and the hole transporters.

  15. Validation of Modified Wine-Rack Thermal Design for Nickel-Hydrogen Batteries in Landsat-7 Spacecraft Thermal Vacuum Test and in Flight

    NASA Technical Reports Server (NTRS)

    Choi, Michael K.

    1999-01-01

    A heritage wine-rack thermal/mechanical design for the nickel-hydrogen batteries was the baseline at the Landsat-7 Preliminary Design Review. An integrated thermal and power analysis of the batteries performed by the author in 1994 revealed that the maximum cell-to-cell gradient was 6.6 C. The author proposed modifying the heritage wine-rack design by enhancing heat conduction from cells to cells, and from cells to battery frame. At the 1995 Intersociety Energy Conversion Engineering Conference (IECEC), the author presented a paper on methods of modifying the wine-rack design. It showed that the modified wine-rack option, which uses a metallic filler, could reduce the maximum cell-to-cell temperature gradient to 1.30 C, and could also reduce the maximum cell temperature by as much as 80 C. That design concept was adopted by the Landsat7 Project Office, and a design change was made at the Critical Design Review. Results of the spacecraft thermal vacuum and thermal balance tests, and temperature data in flight show that the temperatures of the battery cells are very uniform. The maximum cell-to-cell gradient is 1.50 C. They validate the modified wine-rack thermal design.

  16. Effect of power history on the shape and the thermal stress of a large sapphire crystal during the Kyropoulos process

    NASA Astrophysics Data System (ADS)

    Nguyen, Tran Phu; Chuang, Hsiao-Tsun; Chen, Jyh-Chen; Hu, Chieh

    2018-02-01

    In this study, the effect of the power history on the shape of a sapphire crystal and the thermal stress during the Kyropoulos process are numerically investigated. The simulation results show that the thermal stress is strongly dependent on the power history. The thermal stress distributions in the crystal for all growth stages produced with different power histories are also studied. The results show that high von Mises stress regions are found close to the seed of the crystal, the highly curved crystal surface and the crystal-melt interface. The maximum thermal stress, which occurs at the crystal-melt interface, increases significantly in value as the crystal expands at the crown. After this, there is reduction in the maximum thermal stress as the crystal lengthens. There is a remarkable enhancement in the maximum von Mises stress when the crystal-melt interface is close to the bottom of the crucible. There are two obvious peaks in the maximum Von Mises stress, at the end of the crown stage and in the final stage, when cracking defects can form. To alleviate this problem, different power histories are considered in order to optimize the process to produce the lowest thermal stress in the crystal. The optimal power history is found to produce a significant reduction in the thermal stress in the crown stage.

  17. Study of the effects of adding Yttrium oxide particles in some physical, thermal, and mechanical properties of heat-curing acrylic resin

    NASA Astrophysics Data System (ADS)

    Khalil, Bassam I.; Gharkan, Mohammed R.; Ali, Ahmed H.

    2018-05-01

    Extensively use of hot-curing acrylic in prosthetic dentistry field, increase the needed to modifying its mechanical, thermal, and physical properties. In this work Yttrium oxide had added with different weight fractions, (5%, 10%, 15% and 20%), as reinforcement phase on purpose of developing these properties. Tensile strength, hardness, density, water adsorption, and thermal conductivity had been investigated for prepared composite specimens. The results show that the maximum tensile strength was at (10) % wt. of Y2O3 addition, (19) %more than that of plain acrylic, maximum hardness was at (15) % wt. of Y2O3 addition, (8.5) % more than that of plain acrylic, maximum density was at (20) % wt. of Y2O3 addition, (18.2) % more than that of plain acrylic, maximum decrease in water absorption was at (10) % wt. of Y2O3 addition, (29) % less than that of plain acrylic. Finally the maximum thermal conductivity was at (20) % wt. of Y2O3 addition, (16) % more than that of plain acrylic.

  18. Effect of thermal fatigue on the structure and properties of Ni3Al-based alloy single crystals

    NASA Astrophysics Data System (ADS)

    Povarova, K. B.; Drozdov, A. A.; Bazyleva, O. A.; Bulakhtina, M. A.; Alad'ev, N. A.; Antonova, A. V.; Arginbaeva, E. G.; Morozov, A. E.

    2014-05-01

    The effect of thermal fatigue during tests of <001> and <111> single crystals according to the schedules 100 ai 850°C, 100 ai 1050°C, 100 ai 1100°C at a peak-to-peak stress Δσtc = 700-1000 MPa (sum of the maximum tensile and compressive stresses in a thermal cycle) on the structure, the fracture, and the fatigue life of an Ni3Al-based VKNA-1V alloy is studied. It is found that, at 103 thermal cycles, the <111> single crystals have the maximum thermal fatigue resistance at the maximum cycle temperature of 850 and 1050°C, and the properties of the <001> and <111> samples are almost the same at the maximum thermal cycle temperature of 1100°C. After thermal cycling at the maximum temperature of 850°C, the γ layers in the two-phase γ' + γ region in dendrites remain a single-phase structure, as in the as-cast material, and the layer thickness is 100-150 nm. When the maximum thermal cycle temperature increases to 1050 or 1100°C, the discontinuous γ-phase layers in the γ'(Ni3Al) matrix change their morphology and become shorter and wider (their thickness is 300-700 nm). The nickel-based supersaturated solid solution in these layers decomposes with the formation of secondary γ'(Ni3Al)-phase (γ'sec) precipitates in the form of cuboids 50 and 100 nm in size at the maximum cycle temperature of 1050 and 1100°C, respectively. The alternating stresses that appear during thermal cycling cause plastic deformation. As in nickel superalloys, this deformation at the first stage proceeds via the slip of screw dislocations along octahedral {111} planes. Networks of 60° dislocation segments form at γ'/γ interfaces in this case. Fracture begins at the lines of intersection of the slip planes of the {111} octahedron with the sample surface. During fractional, a crack passes from one octahedral plane to another and forms terraces and steps (crystallographic fracture); as a result, the fracture surface bends and becomes curved. In all cases, the fracture surfaces have a mixed brittle-ductile character with a combination of crystallographic and ductile (dimple) fracture elements.

  19. MPLM Donatello is offloaded at the SLF

    NASA Technical Reports Server (NTRS)

    2001-01-01

    At the KSC Shuttle Landing Facility, the Italian Space Agency's Multi- Purpose Logistics Module Donatello begins rolling out of the Airbus '''Beluga''' air cargo plane that brought it from the factory of Alenia Aerospazio in Turin, Italy. The third of three for the International Space Station, the module will be transported to the Space Station Processing Facility for processing. Among the activities for the payload test team are integrated electrical tests with other Station elements in the SSPF, leak tests, electrical and software compatibility tests with the Space Shuttle (using the Cargo Integrated Test equipment) and an Interface Verification Test once the module is installed in the Space Shuttle's payload bay at the launch pad. The most significant mechanical task to be performed on Donatello in the SSPF is the installation and outfitting of the racks for carrying the various experiments and cargo.

  20. MPLM Donatello is offloaded at the SLF

    NASA Technical Reports Server (NTRS)

    2001-01-01

    At the KSC Shuttle Landing Facility, an Airbus '''Beluga''' air cargo plane opens to reveal its cargo, the Italian Space Agency's Multi- Purpose Logistics Module Donatello, from the factory of Alenia Aerospazio in Turin, Italy. The third of three for the International Space Station, the module will be transported to the Space Station Processing Facility for processing. Among the activities for the payload test team are integrated electrical tests with other Station elements in the SSPF, leak tests, electrical and software compatibility tests with the Space Shuttle (using the Cargo Integrated Test equipment) and an Interface Verification Test once the module is installed in the Space Shuttle's payload bay at the launch pad. The most significant mechanical task to be performed on Donatello in the SSPF is the installation and outfitting of the racks for carrying the various experiments and cargo.

  1. MPLM Donatello is offloaded at the SLF

    NASA Technical Reports Server (NTRS)

    2001-01-01

    At the KSC Shuttle Landing Facility, the Italian Space Agency's Multi- Purpose Logistics Module Donatello rolls out of the Airbus '''Beluga''' air cargo plane that brought it from the factory of Alenia Aerospazio in Turin, Italy. The third of three for the International Space Station, the module will be transported to the Space Station Processing Facility for processing. Among the activities for the payload test team are integrated electrical tests with other Station elements in the SSPF, leak tests, electrical and software compatibility tests with the Space Shuttle (using the Cargo Integrated Test equipment) and an Interface Verification Test once the module is installed in the Space Shuttle's payload bay at the launch pad. The most significant mechanical task to be performed on Donatello in the SSPF is the installation and outfitting of the racks for carrying the various experiments and cargo.

  2. Validating a two-high-threshold measurement model for confidence rating data in recognition.

    PubMed

    Bröder, Arndt; Kellen, David; Schütz, Julia; Rohrmeier, Constanze

    2013-01-01

    Signal Detection models as well as the Two-High-Threshold model (2HTM) have been used successfully as measurement models in recognition tasks to disentangle memory performance and response biases. A popular method in recognition memory is to elicit confidence judgements about the presumed old/new status of an item, allowing for the easy construction of ROCs. Since the 2HTM assumes fewer latent memory states than response options are available in confidence ratings, the 2HTM has to be extended by a mapping function which models individual rating scale usage. Unpublished data from 2 experiments in Bröder and Schütz (2009) validate the core memory parameters of the model, and 3 new experiments show that the response mapping parameters are selectively affected by manipulations intended to affect rating scale use, and this is independent of overall old/new bias. Comparisons with SDT show that both models behave similarly, a case that highlights the notion that both modelling approaches can be valuable (and complementary) elements in a researcher's toolbox.

  3. Critical Analysis of Dual-Probe Heat-Pulse Technique Applied to Measuring Thermal Diffusivity

    NASA Astrophysics Data System (ADS)

    Bovesecchi, G.; Coppa, P.; Corasaniti, S.; Potenza, M.

    2018-07-01

    The paper presents an analysis of the experimental parameters involved in application of the dual-probe heat pulse technique, followed by a critical review of methods for processing thermal response data (e.g., maximum detection and nonlinear least square regression) and the consequent obtainable uncertainty. Glycerol was selected as testing liquid, and its thermal diffusivity was evaluated over the temperature range from - 20 °C to 60 °C. In addition, Monte Carlo simulation was used to assess the uncertainty propagation for maximum detection. It was concluded that maximum detection approach to process thermal response data gives the closest results to the reference data inasmuch nonlinear regression results are affected by major uncertainties due to partial correlation between the evaluated parameters. Besides, the interpolation of temperature data with a polynomial to find the maximum leads to a systematic difference between measured and reference data, as put into evidence by the Monte Carlo simulations; through its correction, this systematic error can be reduced to a negligible value, about 0.8 %.

  4. Thermal adaptation and phosphorus shape thermal performance in an assemblage of rainforest ants.

    PubMed

    Kaspari, Michael; Clay, Natalie A; Lucas, Jane; Revzen, Shai; Kay, Adam; Yanoviak, Stephen P

    2016-04-01

    We studied the Thermal Performance Curves (TPCs) of 87 species of rainforest ants and found support for both the Thermal Adaptation and Phosphorus-Tolerance hypotheses. TPCs relate a fitness proxy (here, worker speed) to environmental temperature. Thermal Adaptation posits that thermal generalists (ants with flatter, broader TPCs) are favored in the hotter, more variable tropical canopy compared to the cooler, less variable litter below. As predicted, species nesting in the forest canopy 1) had running speeds less sensitive to temperature; 2) ran over a greater range of temperatures; and 3) ran at lower maximum speeds. Tradeoffs between tolerance and maximum performance are often invoked for constraining the evolution of thermal generalists. There was no evidence that ant species traded off thermal tolerance for maximum speed, however. Phosphorus-Tolerance is a second mechanism for generating ectotherms able to tolerate thermal extremes. It posits that ants active at high temperatures invest in P-rich machinery to buffer their metabolism against thermal extremes. Phosphorus content in ant tissue varied three-fold, and as predicted, temperature sensitivity was lower and thermal range was higher in P-rich species. Combined, we show how the vertical distribution of hot and variable vs. cooler and stable microclimates in a single forest contribute to a diversity of TPCs and suggest that a widely varying P stoichiometry among these ants may drive some of these differences.

  5. Solution-Processed hybrid Sb2 S3 planar heterojunction solar cell

    NASA Astrophysics Data System (ADS)

    Huang, Wenxiao; Borazan, Ismail; Carroll, David

    Thin-film solar cells based on inorganic absorbers permit a high efficiency and stability. Among or those absorber candidates, recently Sb2S3 has attracted extensive attention because of its suitable band gap (1.5eV ~1.7 eV) , strong optical absorption, low-cost and earth-abundant constituents. Currently high-efficiency Sb2S3 solar cells have absorber layer deposited on nanostructured TiO2 electrodes in combination with organic hole transport material (HTM) on top. However it's challenging to fill the nanostructured TiO2 layer with Sb2S3 and subsequently by HTM, this leads to uncovered surface permits charge recombination. And the existing of Sb2S3/TiO2/HTM triple interface will enhance the recombination due to the surface trap state. Therefore, a planar junction cell would not only have simpler structure with less steps to fabricate but also ideally also have a higher open circuit voltage because of less interface carrier recombination. By far there is limited research focusing on planar Sb2S3 solar cell, so the feasibility is still unclear. Here, we developed a low-toxic solution method to fabricate Sb2S3 thin film solar cell, then we studied the morphology of the Sb2S3 layer and its impact to the device performance. The best device with a structure of FTO/TiO2/Sb2S3/P3HT/Ag has PCE over 5% which is similar or higher than yet the best nanostructure devices with the same HTM. Furthermore, based on solution engineering and surface modification, we improved the Sb2S3 film quality and achieved a record PCE. .

  6. Interface Play between Perovskite and Hole Selective Layer on the Performance and Stability of Perovskite Solar Cells.

    PubMed

    Salado, Manuel; Idigoras, Jesus; Calio, Laura; Kazim, Samrana; Nazeeruddin, Mohammad Khaja; Anta, Juan A; Ahmad, Shahzada

    2016-12-21

    Perovskite solar cells with variety of hole selective contacts such as 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD), poly(3-hexylthiophene-2,5-diyl), poly[bis(4-phenyl)(2,5,6-trimentlyphenyl)amine], 5,10,15-trihexyl-3,8,13-tris(4-methoxyphenyl)-10,15-dihydro-5H-diindolo[3,2-a:3',2'-c]carbazole (HMPDI), and 2',7'-bis(bis(4-methoxyphenyl)amino)spiro[cyclopenta[2,1-b:3,4-b']dithiophene-4,9'-fluorene] were employed to elucidate its role at the interface of perovskite and metallic cathode. Microscopy images revealed Spiro-OMeTAD and HMPDI produce smoother and intimate contact between perovskite/hole transporting materials (HTM) interfaces among others evaluated here. This morphological feature appears to be connected with three fundamental facts: (1) hole injection to the HTM is much more efficient as evidenced by photoluminescence measurements, (2) recombination losses are less important as evidenced by intensity-modulated photovoltage spectroscopy and impedance spectroscopy measurements, and (3) fabricated solar cells are much more robust against degradation by moisture. Devices with higher open-circuit photovoltages are characterized by higher values of the recombination resistance extracted from the impedance data. The variation in device hysteresis behavior can be ascribed mainly due to the molecular interaction and the core of HTM employed. In all cases, this fact is related with a larger value of the low-frequency capacitance, which indicates that the HTM can induce specific slow processes of ion accumulation at the interface. Notably, these processes tend to slowly relax in time, as hysteresis is substantially reduced for aged devices.

  7. Thermal modelling and optimisation of total useful energy rate of Joule-Brayton reheat cogeneration cycle

    NASA Astrophysics Data System (ADS)

    Dubey, M.; Chandra, H.; Kumar, Anil

    2016-02-01

    A thermal modelling for the performance evaluation of gas turbine cogeneration system with reheat is presented in this paper. The Joule-Brayton cogeneration reheat cycle is based on the total useful energy rate (TUER) has been optimised and the efficiency at the maximum TUER is determined. The variation of maximum dimensionless TUER and efficiency at maximum TUER with respect to cycle temperature ratio have also been analysed. From the results, it has been found that the dimensionless maximum TUER and the corresponding thermal efficiency decrease with the increase in power to heat ratio. The result also shows that the inclusion of reheat significantly improves the overall performance of the cycle. From the thermodynamic performance point of view, this methodology may be quite useful in the selection and comparison of combined energy production systems.

  8. Thermal design of composite material high temperature attachments

    NASA Technical Reports Server (NTRS)

    1972-01-01

    An evaluation has been made of the thermal aspects of utilizing advanced filamentary composite materials as primary structures on the shuttle vehicle. The technical objectives of this study are to: (1) establish and design concepts for maintaining material temperatures within allowable limits at TPS attachments and or penetrations applicable to the space shuttle; and (2) verify the thermal design analysis by testing selected concepts. Specific composite materials being evaluated are boron epoxy, graphite/epoxy, boron polyimide, and boron aluminum; graphite/polyimide has been added to this list for property data identification and preliminary evaluation of thermal design problems. The TPS standoff to composite structure attachment over-temperature problem is directly related to TPS maximum surface temperature. To provide a thermally comprehensive evaluation of attachment temperature characteristics, maximum surface temperatures of 900 F, 1200 F, 1800 F, 2500 F and 3000 F are considered in this study. This range of surface temperatures and the high and low maximum temperature capability of the selected composite materials will result in a wide range of thermal requirements for composite/TPS standoff attachments.

  9. Can oil lubricated dental handpieces be sterilized?: part 1. The problem.

    PubMed

    Kudhail, Ravinder

    2013-09-01

    HTM 01-05 guidelines state that decontamination of handpieces remains a challenge, in particular the lumen, due to oil impeding access for steam sterilization. This paper discusses important aspects of cleaning and sterilization of the handpiece lumen and critically appraises the literature found on this topic. The paper is not intended to cover precleaning methods in detail. The complex structure of handpiece lumens makes them difficult to sterilize. Current knowledge of this subject is necessary for general dental practitioners to decide on investment in new equipment correctly, which has been validated by the manufacturer, in order to comply with HTM 01-05 guidelines.

  10. Potassium-chemical synthesis of 3D graphene from CO 2 and its excellent performance in HTM-free perovskite solar cells

    DOE PAGES

    Wei, Wei; Hu, Baoyun; Jin, Fangming; ...

    2017-03-29

    The conversion of greenhouse gas CO 2 into novel materials is the most promising approach to solve greenhouse gas issues. In this paper, we report for the first time the reaction of potassium with CO 2 to synthesize three-dimensional honeycomb-like structured graphene (3DHG). Furthermore, 3DHG exhibited excellent performance as a counter electrode for hole transport material (HTM)-free perovskite solar cells, leading to a power conversion efficiency of 10.06%. Finally, this work constitutes a new aspect of potassium chemistry for material synthesis from a greenhouse gas and the generation of electrical energy from sunlight.

  11. Solution-Processed Cu(In, Ga)(S, Se)2 Nanocrystal as Inorganic Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells.

    PubMed

    Xu, Lu; Deng, Lin-Long; Cao, Jing; Wang, Xin; Chen, Wei-Yi; Jiang, Zhiyuan

    2017-12-01

    Perovskite solar cells are emerging as one of the most promising candidates for solar energy harvesting. To date, most of the high-performance perovskite solar cells have exclusively employed organic hole-transporting materials (HTMs) such as 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) or polytriarylamine (PTAA) which are often expensive and have low hole mobility. Almost all these HTMs reported needed lithium salt, e.g., lithium bis(trifluoromethylsulfonyl)imide (Li-TFSI) doping, to improve hole mobility and performance. However, the use of Li-TFSI should be avoided because the hygroscopic nature of Li-TFSI could cause decomposition of perovskite and reduce device stability. Herein, we employed solution-processed CuIn 0.1 Ga 0.9 (S 0.9 Se 0.1 ) 2 (CIGSSe) nanocrystals as a novel inorganic HTM in perovskite solar cells. A power conversion efficiency of 9.15% was obtained for CIGSSe-based devices with improved stability, compared to devices using spiro-OMeTAD as HTM. This work offers a promising candidate of Cu-based inorganic HTM for efficient and stable perovskite solar cells.

  12. MPLM Donatello is offloaded at the SLF

    NASA Technical Reports Server (NTRS)

    2001-01-01

    At the Shuttle Landing Facility, workers in cherry pickers (left and right) help direct the offloading of the Italian Space Agency's Multi- Purpose Logistics Module Donatello from the Airbus '''Beluga''' air cargo plane that brought it from the factory of Alenia Aerospazio in Turin, Italy. The third of three for the International Space Station, the module will be transported to the Space Station Processing Facility for processing. Among the activities for the payload test team are integrated electrical tests with other Station elements in the SSPF, leak tests, electrical and software compatibility tests with the Space Shuttle (using the Cargo Integrated Test equipment) and an Interface Verification Test once the module is installed in the Space Shuttle's payload bay at the launch pad. The most significant mechanical task to be performed on Donatello in the SSPF is the installation and outfitting of the racks for carrying the various experiments and cargo.

  13. MoS2: a two-dimensional hole-transporting material for high-efficiency, low-cost perovskite solar cells

    NASA Astrophysics Data System (ADS)

    Kohnehpoushi, Saman; Nazari, Pariya; Abdollahi Nejand, Bahram; Eskandari, Mehdi

    2018-05-01

    In this work MoS2 thin film was studied as a potential two-dimensional (2D) hole-transporting material for fabrication of low-cost, durable and efficient perovskite solar cells. The thickness of MoS2 was studied as a potential factor in reaching high power conversion efficiency in perovskite solar cells. The thickness of the perovskite layer and the different metal back contacts gave distinct photovoltaic properties to the designed cells. The results show that a single sheet of MoS2 could considerably improve the power conversion efficacy of the device from 10.41% for a hole transport material (HTM)-free device to 20.43% for a device prepared with a 0.67 nm thick MoS2 layer as a HTM. On the back, Ag and Al collected the carriers more efficiently than Au due to the value of their metal contact work function with the TiO2 conduction band. The present work proposes a new architecture for the fabrication of low-cost, durable and efficient perovskite solar cells made from a low-cost and robust inorganic HTM and electron transport material.

  14. The U.S. Lab placed in vacuum chamber for leak test

    NASA Technical Reports Server (NTRS)

    2000-01-01

    In the Operations and Checkout Building, the U.S. Lab, a component of the International Space Station, is lowered into a three-story vacuum chamber. The 32,000-pound scientific research lab, named Destiny, is the first Space Station element to spend seven days in the renovated vacuum chamber for a leak test. Destiny is scheduled to be launched on Shuttle mission STS-98, the 5A assembly mission, targeted for Jan. 18, 2001. During the mission, the crew will install the Lab in the Space Station during a series of three space walks. The STS-98 mission will provide the Station with science research facilities and expand its power, life support and control capabilities. The U.S. Lab module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research.

  15. MoS2: a two-dimensional hole-transporting material for high-efficiency, low-cost perovskite solar cells.

    PubMed

    Kohnehpoushi, Saman; Nazari, Pariya; Nejand, Bahram Abdollahi; Eskandari, Mehdi

    2018-05-18

    In this work MoS 2 thin film was studied as a potential two-dimensional (2D) hole-transporting material for fabrication of low-cost, durable and efficient perovskite solar cells. The thickness of MoS 2 was studied as a potential factor in reaching high power conversion efficiency in perovskite solar cells. The thickness of the perovskite layer and the different metal back contacts gave distinct photovoltaic properties to the designed cells. The results show that a single sheet of MoS 2 could considerably improve the power conversion efficacy of the device from 10.41% for a hole transport material (HTM)-free device to 20.43% for a device prepared with a 0.67 nm thick MoS 2 layer as a HTM. On the back, Ag and Al collected the carriers more efficiently than Au due to the value of their metal contact work function with the TiO 2 conduction band. The present work proposes a new architecture for the fabrication of low-cost, durable and efficient perovskite solar cells made from a low-cost and robust inorganic HTM and electron transport material.

  16. Ineffective Healthcare Technology Management in Benin’s Public Health Sector: The Perceptions of Key Actors and Their Ability to Address the Main Problems

    PubMed Central

    Houngbo, P. Thierry; De Cock Buning, Tjard; Bunders, Joske; Coleman, Harry L. S.; Medenou, Daton; Dakpanon, Laurent; Zweekhorst, Marjolein

    2017-01-01

    Background: Low-income countries face many contextual challenges to manage healthcare technologies effectively, as the majority are imported and resources are constrained to a greater extent. Previous healthcare technology management (HTM) policies in Benin have failed to produce better quality of care for the population and costeffectiveness for the government. This study aims to identify and assess the main problems facing HTM in Benin’s public health sector, as well as the ability of key actors within the sector to address these problems. Methods: We conducted 2 surveys in 117 selected health facilities. The first survey was based on 377 questionnaires and 259 interviews, and the second involved observation and group interviews at health facilities. The Temple-Bird Healthcare Technology Package System (TBHTPS), tailored to the context of Benin’s health system, was used as a conceptual framework. Results: The findings of the first survey show that 85% of key actors in Benin’s HTM sector characterized the system as failing in components of the TBHTPS framework. Biomedical, clinical, healthcare technology engineers and technicians perceived problems most severely, followed by users of equipment, managers and hospital directors, international organization officers, local and foreign suppliers, and finally policy-makers, planners and administrators at the Ministry of Health (MoH). The 5 most important challenges to be addressed are policy, strategic management and planning, and technology needs assessment and selection – categorized as major enabling inputs (MEI) in HTM by the TBHTPS framework – and installation and commissioning, training and skill development and procurement, which are import and use activities (IUA). The ability of each key actor to address these problems (the degree of political or administrative power they possess) was inversely proportional to their perception of the severity of the problems. Observational data gathered during site visits described a different set of challenges including maintenance and repair, distribution, installation and commissioning, use and training and personnel skill development. Conclusion: The lack of experiential and technical knowledge in policy development processes could underpin many of the continuing problems in Benin’s HTM system. Before solutions can be devised to these problems, it is necessary to investigate their root causes, and which problems are most amenable to policy development. PMID:28949474

  17. Critical Review of Industrial Techniques for Thermal-Conductivity Measurements of Thermal Insulation Materials

    NASA Astrophysics Data System (ADS)

    Hammerschmidt, Ulf; Hameury, Jacques; Strnad, Radek; Turzó-Andras, Emese; Wu, Jiyu

    2015-07-01

    This paper presents a critical review of current industrial techniques and instruments to measure the thermal conductivity of thermal insulation materials, especially those insulations that can operate at temperatures above and up to . These materials generally are of a porous nature. The measuring instruments dealt with here are selected based on their maximum working temperature that should be higher than at least . These instruments are special types of the guarded hot-plate apparatus, the guarded heat-flow meter, the transient hot-wire and hot-plane instruments as well as the laser/xenon flash devices. All technical characteristics listed are quoted from the generally accessible information of the relevant manufacturers. The paper includes rankings of the instruments according to their standard retail price, the maximum sample size, and maximum working temperature, as well as the minimum in their measurement range.

  18. The comparison of thermal tissue injuries caused by ultrasonic scalpel and electrocautery use in rabbit tongue tissue

    PubMed Central

    Beriat, Guclu Kaan; Akmansu, Sefik Halit; Ezerarslan, Hande; Dogan, Cem; Han, Unsal; Saglam, Mehmet; Senel, Oytun Okan; Kocaturk, Sinan

    2012-01-01

    The aim of this study compares to the increase in tissue temperature and the thermal histological effects of ultrasonic scalpel, bipolar and unipolar electrosurgery incisions in the tongue tissue of rabbits. This study evaluates the histopathological changes related to thermal change and the maximum temperature values in the peripheral tissue brought about by the incisions carried out by the three methods in a comparative way. To assess thermal tissue damage induced by the three instruments, maximum tissue temperatures were measured during the surgical procedure and tongue tissue samples were examined histopathologically following the surgery. The mean maximum temperature values of the groups were 93.93±2.76 C° for the unipolar electrocautery group, whereas 85.07±5.95 C° for the bipolar electrocautery group, and 108.23±7.64 C° for the ultrasonic scalpel group. There was a statistically significant relationship between the increase in maximum temperature values and the separation among tissue layers, edema, congestion, necrosis, hemorrhage, destruction in blood vessel walls and fibrin accumulation, and between the existence of fibrin thrombus and tissue damage depth (p<0.05). It was concluded that the bipolar electrocautery use gives way to less temperature increase in the tissues and less thermal tissue damage in comparison to the other methods. PMID:22938541

  19. Rotational reflectance of dispersed vitrinite from the Arkoma basin

    USGS Publications Warehouse

    Houseknecht, D.W.; Weesner, C.M.B.

    1997-01-01

    Rotational reflectance of dispersed vitrinite provides superior documentation of thermal maturity and a capability for interpreting relative timing between thermal and kinematic events in Arkoma Basin strata characterized by vitrinite reflectances up to 5%. Rotational reflectance (R(rot)) is a more precise and less ambiguous index of thermal maturity than maximum (R'(max)), minimum (R(min)), and random (R(ran)) reflectance. Vitrinite reflectance anisotropy becomes sufficiently large to be measurable (using a microscope equipped with an automated rotating polarizer) at ???2% R(rot) and increases following a power function with increasing thermal maturity. Rotational reflectance data can be used to infer the shape of the vitrinite reflectance indicating surface (i.e. indicatrix) and, in turn, to enhance interpretations of the timing between thermal maxima and compressional tectonic events. Data from three wells in the Arkoma Basin Ouachita frontal thrust belt are used as examples. The absence of offsets in measured R(rot) across thrust faults combined with a predominance of uniaxial vitrinite in the thrust faulted part of the section suggest thermal maximum postdated thrust faulting in the western Ouachita frontal thrust belt of Oklahoma. In contrast, the general absence of offsets in measured R(rot) across thrust faults combined with a predominance of biaxial vitrinite in the thrust faulted part of the section suggest that the thermal maximum was coeval with thrust faulting in the eastern Ouachita frontal thrust belt of Arkansas. The presence of biaxial vitrinite in an allochthonous section and uniaxial vitrinite in an underlying, autochthonous section suggests that the thermal maximum was coeval with listric thrust faulting in the central Arkoma Basin of Oklahoma, and that rotational reflectance data can be used as a strain indicator to detect subtle decollement zones.

  20. Rapid change in the thermal tolerance of a tropical lizard.

    PubMed

    Leal, Manuel; Gunderson, Alex R

    2012-12-01

    The predominant view is that the thermal physiology of tropical ectotherms, including lizards, is not labile over ecological timescales. We used the recent introduction (∼35 years ago) of the Puerto Rican lizard Anolis cristatellus to Miami, Florida, to test this thermal rigidity hypothesis. We measured lower (critical thermal minimum [CT(min)]) and upper (critical thermal maximum [CT(max)]) thermal tolerances and found that the introduced population tolerates significantly colder temperatures (by ∼3°C) than does the Puerto Rican source population; however, CT(max) did not differ. These results mirror the thermal regimes experienced by each population: Miami reaches colder ambient temperatures than Puerto Rico, but maximum ambient temperatures are similar. The differences in CT(min) were observed even though lizards from both sites experienced nearly identical conditions for 49 days before CT(min) measurement. Our results demonstrate that changes in thermal tolerance occurred relatively rapidly (∼35 generations), which strongly suggests that the thermal physiology of tropical lizards is more labile than previously proposed.

  1. Efficiency and its bounds for a quantum Einstein engine at maximum power.

    PubMed

    Yan, H; Guo, Hao

    2012-11-01

    We study a quantum thermal engine model for which the heat transfer law is determined by Einstein's theory of radiation. The working substance of the quantum engine is assumed to be a two-level quantum system of which the constituent particles obey Maxwell-Boltzmann (MB), Fermi-Dirac (FD), or Bose-Einstein (BE) distributions, respectively, at equilibrium. The thermal efficiency and its bounds at maximum power of these models are derived and discussed in the long and short thermal contact time limits. The similarity and difference between these models are discussed. We also compare the efficiency bounds of this quantum thermal engine to those of its classical counterpart.

  2. Maximum thermal limits of coral reef damselfishes are size dependent and resilient to near-future ocean acidification.

    PubMed

    Clark, Timothy D; Roche, Dominique G; Binning, Sandra A; Speers-Roesch, Ben; Sundin, Josefin

    2017-10-01

    Theoretical models predict that ocean acidification, caused by increased dissolved CO 2 , will reduce the maximum thermal limits of fishes, thereby increasing their vulnerability to rising ocean temperatures and transient heatwaves. Here, we tested this prediction in three species of damselfishes on the Great Barrier Reef, Australia. Maximum thermal limits were quantified using critical thermal maxima (CT max ) tests following acclimation to either present-day or end-of-century levels of CO 2 for coral reef environments (∼500 or ∼1000 µatm, respectively). While species differed significantly in their thermal limits, whereby Dischistodus perspicillatus exhibited greater CT max (37.88±0.03°C; N =47) than Dascyllus aruanus (37.68±0.02°C; N =85) and Acanthochromis polyacanthus (36.58±0.02°C; N =63), end-of-century CO 2 had no effect ( D. aruanus ) or a slightly positive effect (increase in CT max of 0.16°C in D. perspicillatus and 0.21°C in A. polyacanthus ) on CT max Contrary to expectations, early-stage juveniles were equally as resilient to CO 2 as larger conspecifics, and CT max was higher at smaller body sizes in two species. These findings suggest that ocean acidification will not impair the maximum thermal limits of reef fishes, and they highlight the critical role of experimental biology in testing predictions of theoretical models forecasting the consequences of environmental change. © 2017. Published by The Company of Biologists Ltd.

  3. Disintegration impact on sludge digestion process.

    PubMed

    Dauknys, Regimantas; Rimeika, Mindaugas; Jankeliūnaitė, Eglė; Mažeikienė, Aušra

    2016-11-01

    The anaerobic sludge digestion is a widely used method for sludge stabilization in wastewater treatment plant. This process can be improved by applying the sludge disintegration methods. As the sludge disintegration is not investigated enough, an analysis of how the application of thermal hydrolysis affects the sludge digestion process based on full-scale data was conducted. The results showed that the maximum volatile suspended solids (VSS) destruction reached the value of 65% independently on the application of thermal hydrolysis. The average VSS destruction increased by 14% when thermal hydrolysis was applied. In order to have the maximum VSS reduction and biogas production, it is recommended to keep the maximum defined VSS loading of 5.7 kg VSS/m(3)/d when the thermal hydrolysis is applied and to keep the VSS loading between 2.1-2.4 kg VSS/m(3)/d when the disintegration of sludge is not applied. The application of thermal hydrolysis leads to an approximately 2.5 times higher VSS loading maintenance comparing VSS loading without the disintegration; therefore, digesters with 1.8 times smaller volume is required.

  4. Study of heat-moisture treatment of potato starch granules by chemical surface gelatinization.

    PubMed

    Bartz, Josiane; da Rosa Zavareze, Elessandra; Dias, Alvaro Renato Guerra

    2017-08-01

    Native potato starch was subjected to heat-moisture treatment (HMT) at 12%, 15%, 18%, 21%, and 24% of moisture content at 110 °C for 1 h, and the effects on morphology, structure, and thermal and physicochemical properties were investigated. To reveal the internal structure, 30% and 50% of the granular surface were removed by chemical surface gelatinization in concentrated LiCl solution. At moisture contents of 12% and 15%, HTM reduced the gelatinization temperatures and relative crystallinity of the starches, while at moisture contents of 21% and 24 % both increased. The alterations on morphology, X-ray pattern, physicochemical properties, and increase of amylose content were more intense with the increase of moisture content of HMT. The removal of granular layers showed that the changes promoted by HMT occur throughout the whole granule and were pronounced at the core or peripheral region, depending of the moisture content applied during HMT. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  5. Study on the Effect of Thermal and Magnetic Stimulation by Measuring of the Peripheral Blood Flow and Skin Temperature

    NASA Astrophysics Data System (ADS)

    Kubota, Kouhei; Nuruki, Atsuo; Tamari, Youzou; Yunokuchi, Kazutomo

    Recently, the stiff shoulder accompanying the muscle fatigue becomes an issue of public concern. Therefore, we paid attention to the effect of the thermal and magnetic stimulation for the muscle fatigue. The maximum voluntary contraction has recovered significantly, and also peripheral blood flow has increased by stimulation. In order to evaluate if the thermal and magnetic stimulation has any effects, three parameters was measured, which are the maximum voluntary contraction, peripheral blood flow and skin temperature. The skin temperature, however, did not changed significantly.

  6. Abdominal exploration - slideshow

    MedlinePlus

    ... ency/presentations/100049.htm Abdominal exploration - series—Normal ... intestine (jejunum and ileum), the large intestine (colon), the liver, the spleen, the gallbladder, the pancreas, the uterus, ...

  7. EDEM2 initiates mammalian glycoprotein ERAD by catalyzing the first mannose trimming step

    PubMed Central

    Ninagawa, Satoshi; Okada, Tetsuya; Sumitomo, Yoshiki; Kamiya, Yukiko; Kato, Koichi; Horimoto, Satoshi; Ishikawa, Tokiro; Takeda, Shunichi; Sakuma, Tetsushi; Yamamoto, Takashi

    2014-01-01

    Glycoproteins misfolded in the endoplasmic reticulum (ER) are subjected to ER-associated glycoprotein degradation (gpERAD) in which Htm1-mediated mannose trimming from the oligosaccharide Man8GlcNAc2 to Man7GlcNAc2 is the rate-limiting step in yeast. In contrast, the roles of the three Htm1 homologues (EDEM1/2/3) in mammalian gpERAD have remained elusive, with a key controversy being whether EDEMs function as mannosidases or as lectins. We therefore conducted transcription activator-like effector nuclease–mediated gene knockout analysis in human cell line and found that all endogenous EDEMs possess mannosidase activity. Mannose trimming from Man8GlcNAc2 to Man7GlcNAc2 is performed mainly by EDEM3 and to a lesser extent by EDEM1. Most surprisingly, the upstream mannose trimming from Man9GlcNAc2 to Man8GlcNAc2 is conducted mainly by EDEM2, which was previously considered to lack enzymatic activity. Based on the presence of two rate-limiting steps in mammalian gpERAD, we propose that mammalian cells double check gpERAD substrates before destruction by evolving EDEM2, a novel-type Htm1 homologue that catalyzes the first mannose trimming step from Man9GlcNAc2. PMID:25092655

  8. The U.S. Lab is placed in vacuum chamber for leak test

    NASA Technical Reports Server (NTRS)

    2000-01-01

    With the lid of the three-story vacuum chamber in place, a worker on top checks release of the cables. Inside the chamber is the U.S. Lab, a component of the International Space Station. The 32,000-pound scientific research lab, named Destiny, is the first Space Station element to spend seven days in the renovated vacuum chamber for a leak test. Destiny is scheduled to be launched on Shuttle mission STS-98, the 5A assembly mission, targeted for Jan. 18, 2001. During the mission, the crew will install the Lab in the Space Station during a series of three space walks. The STS-98 mission will provide the Station with science research facilities and expand its power, life support and control capabilities. The U.S. Lab module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research.

  9. The U.S. Lab is placed in vacuum chamber for leak test

    NASA Technical Reports Server (NTRS)

    2000-01-01

    A worker in the Operations and Checkout Building checks the placement of the lid on the vacuum chamber containing the U.S. Lab, a component of the International Space Station. The 32,000-pound scientific research lab, named Destiny, is the first Space Station element to spend seven days in the renovated vacuum chamber for a leak test. Destiny is scheduled to be launched on Shuttle mission STS-98, the 5A assembly mission, targeted for Jan. 18, 2001. During the mission, the crew will install the Lab in the Space Station during a series of three space walks. The STS-98 mission will provide the Station with science research facilities and expand its power, life support and control capabilities. The U.S. Lab module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research.

  10. The U.S. Lab is placed in vacuum chamber for leak test

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Workers in the Operations and Checkout Building check the placement of the lid on the vacuum chamber containing the U.S. Lab, a component of the International Space Station. The 32,000-pound scientific research lab, named Destiny, is the first Space Station element to spend seven days in the renovated vacuum chamber for a leak test. Destiny is scheduled to be launched on Shuttle mission STS-98, the 5A assembly mission, targeted for Jan. 18, 2001. During the mission, the crew will install the Lab in the Space Station during a series of three space walks. The STS-98 mission will provide the Station with science research facilities and expand its power, life support and control capabilities. The U.S. Lab module continues a long tradition of microgravity materials research, first conducted by Skylab and later Shuttle and Spacelab missions. Destiny is expected to be a major feature in future research, providing facilities for biotechnology, fluid physics, combustion, and life sciences research.

  11. Medical device integration using mobile telecommunications infrastructure.

    PubMed

    Moorman, Bridget A; Cockle, Richard A

    2013-01-01

    Financial pressures, an aging population, and a rising number of patients with chronic diseases, have encouraged the use of remote monitoring technologies. This usually entails at least one physiological parameter measurement for a clinician. Mobile telecommunication technologies lend themselves to this functionality, and in some cases, avoid some of the issues encountered with device integration. Moreover, the inherent characteristics of the mobile telecommunications infrastructure allow a coupling of business and clinical functions that were not possible before. Table I compares and contrasts some key aspect of device integration in and out of a healthcare facility. An HTM professional may be part of the team that acquires and/or manages a system using a mobile telecommunications technology. It is important for HTM professionals to ensure the data is in a standard format so that the interfaces across this system don't become brittle and break easily if one part changes. Moreover, the security and safety considerations of the system and the data should be a primary consideration in and y purchase, with attention given to the proper environmental and encryption mechanisms. Clinical engineers and other HTM professionals are unique in that they understand the patient/clinician/device interface and the need to ensure its safety and effectiveness regardless of geographical environment.

  12. The intrinsic stiffness of human trabecular meshwork cells increases with senescence

    PubMed Central

    Chang, Yow-Ren; Murphy, Christopher J.; Russell, Paul

    2015-01-01

    Dysfunction of the human trabecular meshwork (HTM) plays a central role in the age-associated disease glaucoma, a leading cause of irreversible blindness. The etiology remains poorly understood but cellular senescence, increased stiffness of the tissue, and the expression of Wnt antagonists such as secreted frizzled related protein-1 (SFRP1) have been implicated. However, it is not known if senescence is causally linked to either stiffness or SFRP1 expression. In this study, we utilized in vitro HTM senescence to determine the effect on cellular stiffening and SFRP1 expression. Stiffness of cultured cells was measured using atomic force microscopy and the morphology of the cytoskeleton was determined using immunofluorescent analysis. SFRP1 expression was measured using qPCR and immunofluorescent analysis. Senescent cell stiffness increased 1.88±0.14 or 2.57±0.14 fold in the presence or absence of serum, respectively. This was accompanied by increased vimentin expression, stress fiber formation, and SFRP1 expression. In aggregate, these data demonstrate that senescence may be a causal factor in HTM stiffening and elevated SFRP1 expression, and contribute towards disease progression. These findings provide insight into the etiology of glaucoma and, more broadly, suggest a causal link between senescence and altered tissue biomechanics in aging-associated diseases. PMID:25915531

  13. Thermal boundary resistance between sapphire and aluminum monocrystals at low temperature

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sahling, S.; Engert, J.; Gladun, A.

    1981-12-01

    The thermal boundary resistance at boundaries between monocrystalline sapphire and monocrystalline aluminum and between monocrystalline sapphire and polycrystalline aluminum has been measured in the temperature range from 0.1 to 6 K with aluminum in the superconducting and normal states. The ratio of the thermal boundary resistance of the aluminum monocrystals in the superconducting state to that in the normal state increases as the temperature is lowered, reaches a maximum at about 0.13 K, and decreases at still lower temperatures. At the maximum, the thermal boundary resistance in the superconducting state is two orders of magnitude larger than the resistance inmore » the normal state.« less

  14. Cloning of the cDNA for a hematopoietic cell-specific protein related to CD20 and the {beta} subunit of the high-affinity IgE receptor: Evidence for a family of proteins with four membrane-spanning regions

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Adra, C.N.; Morrison, P.; Lim, B.

    1994-10-11

    The authors report the cloning of the cDNA for a human gene whose mRNA is expressed specifically in hematopoietic cells. A long open reading frame in the 1.7-kb mRNA encodes a 214-aa protein of 25 kDa with four hydrophobic regions consistent with a protein that traverses the membrane four times. To reflect the structure and expression of this gene in diverse hematopoietic lineages of lymphoid and myeloid origin, the authors named the gene HTm{sub 4}. The protein is about 20% homologous to two other {open_quotes}four-transmembrane{close_quotes} proteins; the B-cell-specific antigen CD20 and the {beta} subunit of the high-affinity receptor for IgE,more » Fc{sub {epsilon}}RI{beta}. The highest homologies among the three proteins are found in the transmembrane domains, but conserved residues are also recognized in the inter-transmembrane domains and in the N and C termini. Using fluorescence in situ hybridization, they localized HTm{sub 4} to human chromosome 11q12-13.1, where the CD20 and Fc{sub {epsilon}}RI{beta} genes are also located. Both the murine homologue for CD20, Ly-44, and the murine Fc{sub {epsilon}}RI{beta} gene map to the same region in murine chromosome 19. The authors propose that the HTm{sub 4}, CD20, and Fc{sub {epsilon}}RI{beta} genes evolved from the same ancestral gene to form a family of four-transmembrane proteins. It is possible that other related members exist. Similar to CD20 and Fc{sub {epsilon}}RI{beta}, it is likely that Htm{sub 4} has a role in signal transduction and, like Fc{sub {epsilon}}RI{beta}, might be a subunit associated with receptor complexes.« less

  15. Thermal research of infrared sight thermoelectric cooler control circuit under temperature environment

    NASA Astrophysics Data System (ADS)

    Gao, Youtang; Ding, Huan; Xue, Xiao; Xu, Yuan; Chang, Benkang

    2010-10-01

    Testing device TST-05B, which is suitable for adaptability test of semiconductor devices, electronic products and other military equipment under the condition of the surrounding air temperature rapidly changing, is used here for temperature shock test.Thermal stability technology of thermoelectric cooler control circuit infrared sight under temperature shock is studied in this paper. Model parameters and geometry is configured for ADI devices (ADN8830), welding material and PCB which are used in system. Thermoelectric cooler control circuit packaged by CSP32 distribution are simulated and analyzed by thermal shock and waveform through engineering finite element analysis software ANSYYS. Because solders of the whole model have much stronger stress along X direction than that of other directions, initial stress constraints along X direction are primarily considered when the partial model of single solder is imposed by thermal load. When absolute thermal loads stresses of diagonal nodes with maximum strains are separated from the whole model, interpolation is processed according to thermal loads circulation. Plastic strains and thermal stresses of nodes in both sides of partial model are obtained. The analysis results indicates that with thermal load circulation, maximum forces of each circulation along X direction are increasingly enlarged and with the accumulation of plastic strains of danger point, at the same time structural deformation and the location of maximum equivalent plastic strain in the solder joints at the first and eighth, the composition will become invalid in the end.

  16. 53rd Annual Fuze Conference - Next Generation Fuzing - Maximum Advantage for the Warfighter

    DTIC Science & Technology

    2009-05-21

    Time Engineering AB 3:00 pm BREAK 3:20 pm Advances In Thermal Batteries For Fuzing David E. Harney, Advanced Thermal Batteries , Inc...Currently teaming and collaborating with Advanced Thermal Batteries • and Omnitek Partners to develop an improved thermal battery. • Current

  17. Effect of thermal barrier coatings on the performance of steam and water-cooled gas turbine/steam turbine combined cycle system

    NASA Technical Reports Server (NTRS)

    Nainiger, J. J.

    1978-01-01

    An analytical study was made of the performance of air, steam, and water-cooled gas-turbine/steam turbine combined-cycle systems with and without thermal-barrier coatings. For steam cooling, thermal barrier coatings permit an increase in the turbine inlet temperature from 1205 C (2200 F), resulting in an efficiency improvement of 1.9 percentage points. The maximum specific power improvement with thermal barriers is 32.4 percent, when the turbine inlet temperature is increased from 1425 C (2600 F) to 1675 C (3050 F) and the airfoil temperature is kept the same. For water cooling, the maximum efficiency improvement is 2.2 percentage points at a turbine inlet temperature of 1683 C (3062 F) and the maximum specific power improvement is 36.6 percent by increasing the turbine inlet temperature from 1425 C (2600 F) to 1730 C (3150 F) and keeping the airfoil temperatures the same. These improvements are greater than that obtained with combined cycles using air cooling at a turbine inlet temperature of 1205 C (2200 F). The large temperature differences across the thermal barriers at these high temperatures, however, indicate that thermal stresses may present obstacles to the use of coatings at high turbine inlet temperatures.

  18. Gonorrhea

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007267.htm Gonorrhea To use the sharing features on this page, please enable JavaScript. Gonorrhea is a common sexually transmitted infection (STI). Causes ...

  19. Pheochromocytoma

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000340.htm Pheochromocytoma To use the sharing features on this page, please enable JavaScript. Pheochromocytoma is a rare tumor of adrenal gland tissue. ...

  20. Periodontitis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001059.htm Periodontitis To use the sharing features on this page, please enable JavaScript. Periodontitis is inflammation and infection of the ligaments and ...

  1. Appendicitis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000256.htm Appendicitis To use the sharing features on this page, please enable JavaScript. Appendicitis is inflammation of the appendix. The appendix is ...

  2. Rhabdomyolysis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000473.htm Rhabdomyolysis To use the sharing features on this page, please enable JavaScript. Rhabdomyolysis is the breakdown of muscle tissue that leads ...

  3. Neurosciences

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007456.htm Neurosciences To use the sharing features on this page, please enable JavaScript. Neurosciences (or clinical neurosciences) refers to the branch of ...

  4. Sporotrichosis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001338.htm Sporotrichosis To use the sharing features on this page, please enable JavaScript. Sporotrichosis is a long-term ( chronic ) skin infection that ...

  5. Folliculitis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000823.htm Folliculitis To use the sharing features on this page, please enable JavaScript. Folliculitis is inflammation of one or more hair follicles. ...

  6. Aeroheating Thermal Model Correlation for Mars Global Surveyor (MGS) Solar Array

    NASA Technical Reports Server (NTRS)

    Amundsen, Ruth M.; Dec, John A.; George, Benjamin E.

    2003-01-01

    The Mars Global Surveyor (MGS) Spacecraft made use of aerobraking to gradually reduce its orbit period from a highly elliptical insertion orbit to its final science orbit. Aerobraking produces a high heat load on the solar arrays, which have a large surface area exposed to the airflow and relatively low mass. To accurately model the complex behavior during aerobraking, the thermal analysis needed to be tightly coupled to the spatially varying, time dependent aerodynamic heating. Also, the thermal model itself needed to accurately capture the behavior of the solar array and its response to changing heat load conditions. The correlation of the thermal model to flight data allowed a validation of the modeling process, as well as information on what processes dominate the thermal behavior. Correlation in this case primarily involved detailing the thermal sensor nodes, using as-built mass to modify material property estimates, refining solar cell assembly properties, and adding detail to radiation and heat flux boundary conditions. This paper describes the methods used to develop finite element thermal models of the MGS solar array and the correlation of the thermal model to flight data from the spacecraft drag passes. Correlation was made to data from four flight thermal sensors over three of the early drag passes. Good correlation of the model was achieved, with a maximum difference between the predicted model maximum and the observed flight maximum temperature of less than 5%. Lessons learned in the correlation of this model assisted in validating a similar model and method used for the Mars Odyssey solar array aeroheating analysis, which were used during onorbit operations.

  7. Thermal and aerothermal performance of a titanium multiwall thermal protection system

    NASA Technical Reports Server (NTRS)

    Avery, D. E.; Shideler, J. L.; Stuckey, R. N.

    1981-01-01

    A metallic thermal protection system (TPS) concept the multiwall designed for temperature and pressure at Shuttle body point 3140 where the maximum surface temperature is approximately 811 K was tested to evaluate thermal performance and structural integrity. A two tile model of titanium multiwall and a model consisting of a low temperature reusable surface insulation (LRSI) tiles were exposed to 25 simulated thermal and pressure Shuttle entry missions. The two systems performed the same, and neither system deteriorated during the tests. It is indicated that redesign of the multiwall tiles reduces tile thickness and/or weight. A nine tile model of titanium multiwal was tested for radiant heating and aerothermodynamics. Minor design changes that improve structural integrity without having a significant impact on the thermal protection ability of the titanium multiwall TPS are identified. The capability of a titanium multiwall thermal protection system to protect an aluminum surface during a Shuttle type entry trajectory at locations on the vehicle where the maximum surface temperature is below 811 K is demonstrated.

  8. Craniopharyngioma

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000345.htm Craniopharyngioma To use the sharing features on this page, please enable JavaScript. A craniopharyngioma is a noncancerous (benign) tumor that develops at ...

  9. Myocarditis - pediatric

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/007307.htm Myocarditis - pediatric To use the sharing features on this page, please enable JavaScript. Pediatric myocarditis is inflammation of the heart muscle in ...

  10. The thermal and mechanical deformation study of up-stream pumping mechanical seal

    NASA Astrophysics Data System (ADS)

    Chen, H. L.; Xu, C.; Zuo, M. Z.; Wu, Q. B.

    2015-01-01

    Taking the viscosity-temperature relationship of the fluid film into consideration, a 3-D numerical model was established by ANSYS software which can simulate the heat transfer between the upstream pumping mechanical seal stationary and rotational rings and the fluid film between them as well as simulate the thermal deformation, structure deformation and the coupling deformation of them. According to the calculation result, thermal deformation causes the seal face expansion and the maximum thermal deformation appears at the inside of the seal ring. Pressure results in a mechanical deformation, the maximum deformation occurs at the top of the spiral groove and the overall trend is inward the mating face, opposite to the thermal deformation. The coupling deformation indicate that the thermal deformation can be partly counteracted by pressure deformation. Using this model, the relationship between deformation and shaft speed and the sealing liquid pressure was studied. It's found that the shaft speed will both enhance the thermal and structure deformation and the fluid pressure will enhance the structure deformation but has little to do with the thermal deformation. By changing the sealing material, it's found that material with low thermal expansion coefficient and low elastic modulus will suffer less thermal-pressure deformation.

  11. Application of Markov chain model to daily maximum temperature for thermal comfort in Malaysia

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nordin, Muhamad Asyraf bin Che; Hassan, Husna

    2015-10-22

    The Markov chain’s first order principle has been widely used to model various meteorological fields, for prediction purposes. In this study, a 14-year (2000-2013) data of daily maximum temperatures in Bayan Lepas were used. Earlier studies showed that the outdoor thermal comfort range based on physiologically equivalent temperature (PET) index in Malaysia is less than 34°C, thus the data obtained were classified into two state: normal state (within thermal comfort range) and hot state (above thermal comfort range). The long-run results show the probability of daily temperature exceed TCR will be only 2.2%. On the other hand, the probability dailymore » temperature within TCR will be 97.8%.« less

  12. Reactive arthritis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000440.htm Reactive arthritis To use the sharing features on this page, please enable JavaScript. Reactive arthritis is a group of conditions that may ...

  13. Digestive diseases

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007447.htm Digestive diseases To use the sharing features on this page, please enable JavaScript. Digestive diseases are disorders of the digestive tract, which ...

  14. Mathematics disorder

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001534.htm Mathematics disorder To use the sharing features on this page, please enable JavaScript. Mathematics disorder is a condition in which a child's ...

  15. Ethanol poisoning

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002644.htm Ethanol poisoning To use the sharing features on this page, please enable JavaScript. Ethanol poisoning is caused by drinking too much alcohol. ...

  16. Dextromethorphan overdose

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002628.htm Dextromethorphan overdose To use the sharing features on this page, please enable JavaScript. Dextromethorphan is a medicine that helps stop coughing. It ...

  17. Dental cavities

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001055.htm Dental cavities To use the sharing features on this page, please enable JavaScript. Dental cavities are holes (or structural damage) in the ...

  18. Intraductal papilloma

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001238.htm Intraductal papilloma To use the sharing features on this page, please enable JavaScript. Intraductal papilloma is a small, noncancerous (benign) tumor that grows ...

  19. Dermatitis herpetiformis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001480.htm Dermatitis herpetiformis To use the sharing features on this page, please enable JavaScript. Dermatitis herpetiformis (DH) is a very itchy rash consisting ...

  20. Chin augmentation

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002986.htm Chin augmentation To use the sharing features on this page, please enable JavaScript. Chin augmentation is surgery to reshape or enhance the size ...

  1. Antimitochondrial antibody

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003529.htm Antimitochondrial antibody To use the sharing features on this page, please enable JavaScript. Antimitochondrial antibodies (AMA) are substances ( antibodies ) that form against mitochondria. ...

  2. Dimenhydrinate overdose

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002634.htm Dimenhydrinate overdose To use the sharing features on this page, please enable JavaScript. Dimenhydrinate is a type of medicine called an antihistamine. ...

  3. Mistletoe poisoning

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002883.htm Mistletoe poisoning To use the sharing features on this page, please enable JavaScript. Mistletoe is an evergreen plant with white berries. Mistletoe ...

  4. Endoscopic ultrasound

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/007646.htm Endoscopic ultrasound To use the sharing features on this page, please enable JavaScript. Endoscopic ultrasound is a type of imaging test. It is ...

  5. Iontophoresis

    MedlinePlus

    ... Iontophoresis URL of this page: //medlineplus.gov/ency/article/007293.htm Iontophoresis To use the sharing features on this page, please enable JavaScript. Iontophoresis involves passing a weak electrical current through ...

  6. Cardiac rehabilitation

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000791.htm Cardiac rehabilitation To use the sharing features on this page, please enable JavaScript. Cardiac rehabilitation (rehab) is a program that helps you live ...

  7. Hepatitis B

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000279.htm Hepatitis B To use the sharing features on this page, please enable JavaScript. Hepatitis B is irritation and swelling (inflammation) of the ...

  8. Congenital toxoplasmosis

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001360.htm Congenital toxoplasmosis To use the sharing features on this page, please enable JavaScript. Congenital toxoplasmosis is a group of symptoms that occur when ...

  9. Esophageal culture

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003764.htm Esophageal culture To use the sharing features on this page, please enable JavaScript. Esophageal culture is a laboratory test that checks for infection- ...

  10. Endocervical culture

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003754.htm Endocervical culture To use the sharing features on this page, please enable JavaScript. Endocervical culture is a laboratory test that helps identify infection ...

  11. Numerical Study on the Thermal Stress and its Formation Mechanism of a Thermoelectric Device

    NASA Astrophysics Data System (ADS)

    Pan, Tao; Gong, Tingrui; Yang, Wei; Wu, Yongjia

    2018-06-01

    The strong thermo-mechanical stress is one of the most critical failure mechanisms that affect the durability of thermoelectric devices. In this study, numerical simulations on the formation mechanism of the maximum thermal stress inside the thermoelectric device have been performed by using finite element method. The influences of the material properties and the thermal radiation on the thermal stress have been examined. The results indicate that the maximum thermal stress was located at the contact position between the two materials and occurred due to differential thermal expansions and displacement constraints of the materials. The difference in the calculated thermal stress value between the constant and the variable material properties was between 3% and 4%. At a heat flux of 1 W·cm-2 and an emissivity of 0.5, the influence of the radiation heat transfer on the thermal stress was only about 5%; however, when the heat flux was 20 W·cm-2 and the emissivity was 0.7, the influence of the radiation heat transfer was more than 30%.

  12. Total protein

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003483.htm Total protein To use the sharing features on this page, please enable JavaScript. The total protein test measures the total amount of two classes ...

  13. Elephant ear

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002867.htm Elephant ear poisoning To use the sharing features on this page, please enable JavaScript. Elephant ear plants are indoor or outdoor plants with ...

  14. Parkinson disease

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000755.htm Parkinson disease To use the sharing features on this page, please enable JavaScript. Parkinson disease results from certain brain cells dying. These cells ...

  15. Retinitis pigmentosa

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001029.htm Retinitis pigmentosa To use the sharing features on this page, please enable JavaScript. Retinitis pigmentosa is an eye disease in which there is ...

  16. Lymphogranuloma venereum

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000634.htm Lymphogranuloma venereum To use the sharing features on this page, please enable JavaScript. Lymphogranuloma venereum (LGV) is a sexually transmitted bacterial infection. Causes ...

  17. Annular pancreas

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001142.htm Annular pancreas To use the sharing features on this page, please enable JavaScript. An annular pancreas is a ring of pancreatic tissue that encircles ...

  18. Frequent Bowel Movements

    MedlinePlus

    ... bowel disease (IBD). Centers for Disease Control and Prevention. https://www.cdc.gov/ibd/what-is-IBD.htm. Accessed Nov. 15, 2017. Hyperthyroidism (Overactive thyroid). National Institute of Diabetes and Digestive ...

  19. Alpha fetoprotein

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003573.htm Alpha fetoprotein To use the sharing features on this page, please enable JavaScript. Alpha fetoprotein (AFP) is a protein produced by the liver ...

  20. Triglyceride level

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003493.htm Triglyceride level To use the sharing features on this page, please enable JavaScript. The triglyceride level is a blood test to measure the amount ...

  1. Multiple sclerosis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000737.htm Multiple sclerosis To use the sharing features on this page, please enable JavaScript. Multiple sclerosis (MS) is an autoimmune disease that affects the ...

  2. Biliary obstruction - slideshow

    MedlinePlus

    ... ency/presentations/100199.htm Biliary obstruction - series—Normal anatomy To use the sharing ... Overview Bile is a digestive fluid secreted by the liver and stored in the gallbladder which normally is ...

  3. Quantitative nephelometry

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003545.htm Quantitative nephelometry test To use the sharing features on this page, please enable JavaScript. Quantitative nephelometry is a lab test to quickly and ...

  4. Rheumatoid arthritis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000431.htm Rheumatoid arthritis To use the sharing features on this page, please enable JavaScript. Rheumatoid arthritis (RA) is a long-term disease. It leads ...

  5. Amino acids

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002222.htm Amino acids To use the sharing features on this page, please enable JavaScript. Amino acids are organic compounds that combine to form proteins . ...

  6. Pectus carinatum

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003321.htm Pectus carinatum To use the sharing features on this page, please enable JavaScript. Pectus carinatum is present when the chest protrudes over the ...

  7. Elastic-Plastic Thermal Stress Analysis of a High-Pressure Cryogenic Storage Tank

    NASA Technical Reports Server (NTRS)

    Barker, J. Mark; Field, Robert E. (Technical Monitor)

    2003-01-01

    The thermal stresses on a cryogenic storage tank contribute strongly to the state of stress of the tank material and its ability to withstand operational stresses. These thermal stresses also affect the growth of any surface damage that might occur in the tank walls. These stresses are particularly of concern during the initial cooldown period for a new tank placed into service, and during any subsequent thermal cycles. A previous preliminary elastic analysis showed that the thermal stress on the inner wall would reach approximately 1,000MPa (145,000 psi). This stress far exceeds the ASTM specified room temperature values for both yield (170MPa) and ultimate (485 MPa) strength for 304L stainless steel. The present analysis determines the thermal stresses using an elastic-plastic model. The commercial software application ANSYS was used to determine the transient spatial temperature profile and the associated spatial thermal stress profiles in a segment of a thick-walled vessel during a typical cooldown process. A strictly elastic analysis using standard material properties for 304L stainless steel showed that the maximum thermal stress on the inner and outer walls was approximately 960 MPa (tensile) and - 270 MPa (compressive) respectively. These values occurred early in the cooldown process, but at different times, An elastic-plastic analysis showed significantly reducing stress, as expected due to the plastic deformation of the material. The maximum stress for the inner wall was approximately 225 MPa (tensile), while the maximum stress for the outer wall was approximately - 130 MPa (compressive).

  8. Serial analysis of gene expression (SAGE) in normal human trabecular meshwork.

    PubMed

    Liu, Yutao; Munro, Drew; Layfield, David; Dellinger, Andrew; Walter, Jeffrey; Peterson, Katherine; Rickman, Catherine Bowes; Allingham, R Rand; Hauser, Michael A

    2011-04-08

    To identify the genes expressed in normal human trabecular meshwork tissue, a tissue critical to the pathogenesis of glaucoma. Total RNA was extracted from human trabecular meshwork (HTM) harvested from 3 different donors. Extracted RNA was used to synthesize individual SAGE (serial analysis of gene expression) libraries using the I-SAGE Long kit from Invitrogen. Libraries were analyzed using SAGE 2000 software to extract the 17 base pair sequence tags. The extracted sequence tags were mapped to the genome using SAGE Genie map. A total of 298,834 SAGE tags were identified from all HTM libraries (96,842, 88,126, and 113,866 tags, respectively). Collectively, there were 107,325 unique tags. There were 10,329 unique tags with a minimum of 2 counts from a single library. These tags were mapped to known unique Unigene clusters. Approximately 29% of the tags (orphan tags) did not map to a known Unigene cluster. Thirteen percent of the tags mapped to at least 2 Unigene clusters. Sequence tags from many glaucoma-related genes, including myocilin, optineurin, and WD repeat domain 36, were identified. This is the first time SAGE analysis has been used to characterize the gene expression profile in normal HTM. SAGE analysis provides an unbiased sampling of gene expression of the target tissue. These data will provide new and valuable information to improve understanding of the biology of human aqueous outflow.

  9. Numerical simulation of CO2 scroll compressor in transcritical compression cycle

    NASA Astrophysics Data System (ADS)

    Wang, Hongli; Tian, JingRui; Du, Yuanhang; Hou, Xiujuan

    2018-05-01

    Based on the theory of thermodynamics and kinetics, the mathematical model of an orbiting scroll was established and the stress deformations were employed by ANSYS software. Under the action of pressure load, the results show that the serious displacement part is located in the center of the gear head and the maximum deformation is about 7.33 μm. The maximum radial displacement is about 4.42 μm. The maximum radial stress point occurs in the center of the gear head and the maximum stress is about 40.9 MPa. The maximum axial displacement is about 2.31 μm. The maximum axial stress point occurs in the gear head and the maximum stress is about 44.7 MPa. Under the action of temperature load, the results show that the serious deformation part is located in the center of the gear head and the maximum deformation is about 6.3 μm. The maximum thermal stress occurs in the center of the gear head and the maximum thermal stress is about 86.36 MPa. Under the combined action of temperature load and pressure load, the results show that the serious deformation part and the maximum stress are located in the center of the gear head, and the value are about 7.79 μm and 74.19 MPa, respectively.

  10. Thermal shock effect on Mechanical and Physical properties of pre-moisture treated GRE composite

    NASA Astrophysics Data System (ADS)

    Chakraverty, A. P.; Panda, A. B.; Mohanty, U. K.; Mishra, S. C.; Biswal, B. B.

    2018-03-01

    Many practical situations may be encountered under which a GFRP (Glass fibre reinforced polymer) composite, during its service life, is exposed to the severities of sudden temperature fluctuations. Moisture absorption of GRE (Glass fibre reinforced epoxy) composites followed by various gradients of temperature fluctuations may cause thermo- mechanical degradation. It is on this context, the hand layed GRE composite samples are exposed to up-thermal shock (-40°C to +50°C) and down-thermal shock (+50°C to -40°C) for various time interval after several periods of moisture (hydrothermal/hygrothermal) conditioning. The thermally shocked GRE specimens are put to 3-point bend test to divulge inter laminar shear strength (ILSS). Least ILSS values are recorded for the samples with maximum period of moisture treatments under with both up-thermal and down-thermal shock conditions. Lower glass transition temperature (Tg) values, as revealed through the low temperature DSC test, are exhibited at maximum durations of both up-thermal and down-thermal shock for the samples with higher periods of hygrothermal/hydrothermal treatments. SEM fractographs of representative GRE specimens after optimum period of moisture treatments and thermal shock show the various modes of failures.

  11. Pleural effusion

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000086.htm Pleural effusion To use the sharing features on this page, please enable JavaScript. A pleural effusion is a buildup of fluid between the layers ...

  12. Coal worker's pneumoconiosis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000130.htm Coal worker's pneumoconiosis To use the sharing features on this page, please enable JavaScript. Coal worker's pneumoconiosis (CWP) is a lung disease that ...

  13. Protein-losing enteropathy

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007338.htm Protein-losing enteropathy To use the sharing features on this page, please enable JavaScript. Protein-losing enteropathy is an abnormal loss of protein ...

  14. Creatine phosphokinase test

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003503.htm Creatine phosphokinase test To use the sharing features on this page, please enable JavaScript. Creatine phosphokinase (CPK) is an enzyme in the body. ...

  15. Hair straightener poisoning

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002706.htm Hair straightener poisoning To use the sharing features on this page, please enable JavaScript. Hair straightener poisoning occurs when someone swallows products that ...

  16. Hair spray poisoning

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002705.htm Hair spray poisoning To use the sharing features on this page, please enable JavaScript. Hair spray poisoning occurs when someone breathes in (inhales) ...

  17. Fenoprofen calcium overdose

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002649.htm Fenoprofen calcium overdose To use the sharing features on this page, please enable JavaScript. Fenoprofen calcium is a type of medicine called a nonsteroidal ...

  18. Therapeutic drug levels

    MedlinePlus

    ... medlineplus.gov/ency/article/003430.htm Therapeutic drug levels To use the sharing features on this page, please enable JavaScript. Therapeutic drug levels are lab tests to look for the presence ...

  19. Hyperbaric oxygen therapy

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002375.htm Hyperbaric oxygen therapy To use the sharing features on this page, please enable JavaScript. Hyperbaric oxygen therapy uses a special pressure chamber to increase ...

  20. Mercuric chloride poisoning

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002474.htm Mercuric chloride poisoning To use the sharing features on this page, please enable JavaScript. Mercuric chloride is a very poisonous form of mercury. It ...

  1. Cortisol - urine

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003703.htm Cortisol urine test To use the sharing features on this page, please enable JavaScript. The cortisol urine test measures the level of cortisol in the ...

  2. Urine drainage bags

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000142.htm Urine drainage bags To use the sharing features on this page, please enable JavaScript. Urine drainage bags collect urine. Your bag will attach ...

  3. Thrombotic thrombocytopenic purpura

    MedlinePlus

    ... medlineplus.gov/ency/article/000552.htm Thrombotic thrombocytopenic purpura To use the sharing features on this page, please enable JavaScript. Thrombotic thrombocytopenic purpura (TTP) is a blood disorder that causes blood ...

  4. Leucine aminopeptidase - urine

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003617.htm Leucine aminopeptidase - urine To use the sharing features on this page, please enable JavaScript. Leucine aminopeptidase is a type of protein called an ...

  5. Lung diffusion testing

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003854.htm Lung diffusion testing To use the sharing features on this page, please enable JavaScript. Lung diffusion testing measures how well the lungs exchange gases. ...

  6. Scorpion fish sting

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002849.htm Scorpion fish sting To use the sharing features on this page, please enable JavaScript. Scorpion fish are members of the family Scorpaenidae, which includes ...

  7. Pseudomembranous colitis

    MedlinePlus

    ... colitis URL of this page: //medlineplus.gov/ency/article/000259.htm Pseudomembranous colitis To use the sharing features on this page, please enable JavaScript. Pseudomembranous colitis refers to swelling or inflammation of ...

  8. Perioral dermatitis

    MedlinePlus

    ... dermatitis URL of this page: //medlineplus.gov/ency/article/001455.htm Perioral dermatitis To use the sharing features on this page, please enable JavaScript. Perioral dermatitis is a skin disorder resembling acne ...

  9. Naproxen sodium overdose

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002507.htm Naproxen sodium overdose To use the sharing features on this page, please enable JavaScript. Naproxen sodium is a nonsteroidal anti-inflammatory drug (NSAID) used ...

  10. Diclofenac sodium overdose

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002630.htm Diclofenac sodium overdose To use the sharing features on this page, please enable JavaScript. Diclofenac sodium is a prescription medicine used to relieve pain ...

  11. Urine - abnormal color

    MedlinePlus

    ... medlineplus.gov/ency/article/003139.htm Urine - abnormal color To use the sharing features on this page, please enable JavaScript. The usual color of urine is straw-yellow. Abnormally colored urine ...

  12. Dubin-Johnson syndrome

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/000242.htm Dubin-Johnson syndrome To use the sharing features on this page, please enable JavaScript. Dubin-Johnson syndrome (DJS) is a disorder passed down through ...

  13. Pokeweed poisoning

    MedlinePlus

    ... poisoning URL of this page: //medlineplus.gov/ency/article/002874.htm Pokeweed poisoning To use the sharing features on this page, please enable JavaScript. Pokeweed is a flowering plant. Pokeweed poisoning occurs ...

  14. Paradichlorobenzene poisoning

    MedlinePlus

    ... poisoning URL of this page: //medlineplus.gov/ency/article/002902.htm Paradichlorobenzene poisoning To use the sharing features on this page, please enable JavaScript. Paradichlorobenzene is a white, solid chemical with a ...

  15. Genital herpes

    MedlinePlus

    ... herpes URL of this page: //medlineplus.gov/ency/article/000857.htm Genital herpes To use the sharing features on this page, please enable JavaScript. Genital herpes is a sexually transmitted infection. It ...

  16. Yew poisoning

    MedlinePlus

    ... poisoning URL of this page: //medlineplus.gov/ency/article/002877.htm Yew poisoning To use the sharing features on this page, please enable JavaScript. The yew plant is a shrub with evergreen- ...

  17. Philodendron poisoning

    MedlinePlus

    ... poisoning URL of this page: //medlineplus.gov/ency/article/002872.htm Philodendron poisoning To use the sharing features on this page, please enable JavaScript. Philodendron is a flowering houseplant. Philodendron poisoning occurs ...

  18. Shampoo - swallowing

    MedlinePlus

    ... swallowing URL of this page: //medlineplus.gov/ency/article/002737.htm Shampoo - swallowing To use the sharing features on this page, please enable JavaScript. Shampoo is a liquid used to clean the ...

  19. Personal protective equipment

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000447.htm Personal protective equipment To use the sharing features on this page, please enable JavaScript. Personal protective equipment is special equipment you wear to create a ...

  20. Culture-negative endocarditis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000657.htm Culture-negative endocarditis To use the sharing features on this page, please enable JavaScript. Culture-negative endocarditis is an infection and inflammation of ...

  1. Using a Convection Model to Predict Altitudes of White Stork Migration Over Central Israel

    NASA Astrophysics Data System (ADS)

    Shamoun-Baranes, Judy; Liechti, Olivier; Yom-Tov, Yoram; Leshem, Yossi

    Soaring migrants such as storks, pelicans and large birds of prey rely on thermal convection during migration. The convection model ALPTHERM was designed to predict the onset, strength, duration and depth of thermal convection for varying topographies for glider pilots, based on atmospheric conditions at midnight. We tested ALPTHERM predictions as configured for two topographies of central Israel, the Coastal Plains and the Judean and Samarian Mountains in order to predict altitudes of migrating white storks (Ciconia ciconia). Migrating flocks of white storks were tracked with a motorized glider, to measure maximum altitudes of migration during spring 2000. A significant positive correlation was found between the maximum daily altitudes of migration measured and the predicted upper boundary of thermal convection for the Coastal Plains and Samarian Mountains. Thirty-minute predictions for the Coastal Plains and Samarian Mountains correlated positively with measured maximum migration altitudes per thermal. ALPTHERM forecasts can be used to alter flight altitudes in both civil and especially military aviation and reduce the hazard of serious aircraft collisions with soaring migrants.

  2. Effect of in-pile degradation of the meat thermal conductivity on the maximum temperature of the plate-type U-Mo dispersion fuels

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pavel G. Medvedev

    2009-11-01

    Effect of in-pile degradation of thermal conductivity on the maximum temperature of the plate-type research reactor fuels has been assessed using the steady-state heat conduction equation and assuming convection cooling. It was found that due to very low meat thickness, characteristic for this type of fuel, the effect of thermal conductivity degradation on the maximum fuel temperature is minor. For example, the fuel plate featuring 0.635 mm thick meat operating at heat flux of 600 W/cm2 would experience only a 20oC temperature rise if the meat thermal conductivity degrades from 0.8 W/cm-s to 0.3 W/cm-s. While degradation of meat thermalmore » conductivity in dispersion-type U-Mo fuel can be very substantial due to formation of interaction layer between the particles and the matrix, and development of fission gas filled porosity, this simple analysis demonstrates that this phenomenon is unlikely to significantly affect the temperature-based safety margin of the fuel during normal operation.« less

  3. Efficiency and its bounds for thermal engines at maximum power using Newton's law of cooling.

    PubMed

    Yan, H; Guo, Hao

    2012-01-01

    We study a thermal engine model for which Newton's cooling law is obeyed during heat transfer processes. The thermal efficiency and its bounds at maximum output power are derived and discussed. This model, though quite simple, can be applied not only to Carnot engines but also to four other types of engines. For the long thermal contact time limit, new bounds, tighter than what were known before, are obtained. In this case, this model can simulate Otto, Joule-Brayton, Diesel, and Atkinson engines. While in the short contact time limit, which corresponds to the Carnot cycle, the same efficiency bounds as that from Esposito et al. [Phys. Rev. Lett. 105, 150603 (2010)] are derived. In both cases, the thermal efficiency decreases as the ratio between the heat capacities of the working medium during heating and cooling stages increases. This might provide instructions for designing real engines. © 2012 American Physical Society

  4. Comfort air temperature influence on heating and cooling loads of a residential building

    NASA Astrophysics Data System (ADS)

    Stanciu, C.; Șoriga, I.; Gheorghian, A. T.; Stanciu, D.

    2016-08-01

    The paper presents the thermal behavior and energy loads of a two-level residential building designed for a family of four, two adults and two students, for different inside comfort levels reflected by the interior air temperature. Results are intended to emphasize the different thermal behavior of building elements and their contribution to the building's external load. The most important contributors to the building thermal loss are determined. Daily heating and cooling loads are computed for 12 months simulation in Bucharest (44.25°N latitude) in clear sky conditions. The most important aspects regarding sizing of thermal energy systems are emphasized, such as the reference months for maximum cooling and heating loads and these loads’ values. Annual maximum loads are encountered in February and August, respectively, so these months should be taken as reference for sizing thermal building systems, in Bucharest, under clear sky conditions.

  5. Effect of aluminum anodizing in phosphoric acid electrolyte on adhesion strength and thermal performance

    NASA Astrophysics Data System (ADS)

    Lee, Sulki; Kim, Donghyun; Kim, Yonghwan; Jung, Uoochang; Chung, Wonsub

    2016-01-01

    This study examined the adhesive bond strength and thermal performance of the anodized aluminum 6061 in phosphoric acid electrolyte to improve the adhesive bond strength and thermal performance for use in metal core printed circuit boards (MCPCB). The electrolyte temperature and applied voltage were altered to generate varied pore structures. The thickness, porosity and pore diameter of the anodized layer were measured. The pore morphologies were affected most by temperature, which was the driving force for ion transportation. The mechanism of adhesive bond was penetration of the epoxy into the pores. The optimal anodization conditions for maximum adhesive bond strength, 27 MPa, were 293 K and 100V. The maximum thermal conductivity of the epoxy-treated anodized layer was 1.6 W/m·K at 273 K. Compared with the epoxy-treated Al layer used for conventional MCPCBs, the epoxy-treated anodized layer showed advanced thermal performance due to a low difference of thermal resistance and high heat dissipation.

  6. Thermal Characteristics and the Differential Emission Measure Distribution During a B8.3 Flare on 2009 July 4

    NASA Astrophysics Data System (ADS)

    Awasthi, Arun Kumar; Sylwester, Barbara; Sylwester, Janusz; Jain, Rajmal

    2016-06-01

    We investigate the evolution of the differential emission measure distribution (DEM[T]) in various phases of a B8.3 flare which occurred on 2009 July 04. We analyze the soft X-ray (SXR) emission in the 1.6-8.0 keV range, recorded collectively by the Solar Photometer in X-rays (SphinX; Polish) and the Solar X-ray Spectrometer (Indian) instruments. We conduct a comparative investigation of the best-fit DEM[T] distributions derived by employing various inversion schemes, namely, single Gaussian, power-law functions and a Withbroe-Sylwester (W-S) maximum likelihood algorithm. In addition, the SXR spectrum in three different energy bands, that is, 1.6-5.0 keV (low), 5.0-8.0 keV (high), and 1.6-8.0 keV (combined), is analyzed to determine the dependence of the best-fit DEM[T] distribution on the selection of the energy interval. The evolution of the DEM[T] distribution, derived using a W-S algorithm, reveals multi-thermal plasma during the rise to the maximum phase of the flare, and isothermal plasma in the post-maximum phase of the flare. The thermal energy content is estimated by considering the flare plasma to be (1) isothermal and (2) multi-thermal in nature. We find that the energy content during the flare, estimated using the multi-thermal approach, is in good agreement with that derived using the isothermal assumption, except during the flare maximum. Furthermore, the (multi-) thermal energy estimated while employing the low-energy band of the SXR spectrum results in higher values than that derived from the combined energy band. On the contrary, the analysis of the high-energy band of the SXR spectrum leads to lower thermal energy than that estimated from the combined energy band.

  7. THERMAL CHARACTERISTICS AND THE DIFFERENTIAL EMISSION MEASURE DISTRIBUTION DURING A B8.3 FLARE ON 2009 JULY 4

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Awasthi, Arun Kumar; Sylwester, Barbara; Sylwester, Janusz

    We investigate the evolution of the differential emission measure distribution (DEM[ T ]) in various phases of a B8.3 flare which occurred on 2009 July 04. We analyze the soft X-ray (SXR) emission in the 1.6–8.0 keV range, recorded collectively by the Solar Photometer in X-rays (SphinX; Polish) and the Solar X-ray Spectrometer (Indian) instruments. We conduct a comparative investigation of the best-fit DEM[ T ] distributions derived by employing various inversion schemes, namely, single Gaussian, power-law functions and a Withbroe–Sylwester (W–S) maximum likelihood algorithm. In addition, the SXR spectrum in three different energy bands, that is, 1.6–5.0 keV (low),more » 5.0–8.0 keV (high), and 1.6–8.0 keV (combined), is analyzed to determine the dependence of the best-fit DEM[ T ] distribution on the selection of the energy interval. The evolution of the DEM[ T ] distribution, derived using a W–S algorithm, reveals multi-thermal plasma during the rise to the maximum phase of the flare, and isothermal plasma in the post-maximum phase of the flare. The thermal energy content is estimated by considering the flare plasma to be (1) isothermal and (2) multi-thermal in nature. We find that the energy content during the flare, estimated using the multi-thermal approach, is in good agreement with that derived using the isothermal assumption, except during the flare maximum. Furthermore, the (multi-) thermal energy estimated while employing the low-energy band of the SXR spectrum results in higher values than that derived from the combined energy band. On the contrary, the analysis of the high-energy band of the SXR spectrum leads to lower thermal energy than that estimated from the combined energy band.« less

  8. Process for the fabrication of aluminum metallized pyrolytic graphite sputtering targets

    DOEpatents

    Makowiecki, Daniel M.; Ramsey, Philip B.; Juntz, Robert S.

    1995-01-01

    An improved method for fabricating pyrolytic graphite sputtering targets with superior heat transfer ability, longer life, and maximum energy transmission. Anisotropic pyrolytic graphite is contoured and/or segmented to match the erosion profile of the sputter target and then oriented such that the graphite's high thermal conductivity planes are in maximum contact with a thermally conductive metal backing. The graphite contact surface is metallized, using high rate physical vapor deposition (HRPVD), with an aluminum coating and the thermally conductive metal backing is joined to the metallized graphite target by one of four low-temperature bonding methods; liquid-metal casting, powder metallurgy compaction, eutectic brazing, and laser welding.

  9. Borderline personality disorder

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000935.htm Borderline personality disorder To use the sharing features on this page, please enable JavaScript. Borderline personality disorder (BPD) is a mental condition in which ...

  10. 7 CFR 1779.9 - Environmental requirements.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.9 Environmental requirements... or online at http://www.usda.gov/rus/water/ees/index.htm), the environmental review requirements...

  11. Gasoline poisoning

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002806.htm Gasoline poisoning To use the sharing features on this ... This article discusses the harmful effects from swallowing gasoline or breathing in its fumes. This article is ...

  12. Dental sealants

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000779.htm Dental sealants To use the sharing features on this ... case a sealant needs to be replaced. How Dental Sealants are Applied Your dentist applies sealants on ...

  13. 20 CFR 703.2 - Forms.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Insurance Carrier's Agreement and Undertaking. (5) LS-276 Application for Security Deposit Determination. (6... OWCP district offices and on the Internet at http://www.dol.gov/esa/owcp/dlhwc/lsforms.htm. ...

  14. 20 CFR 703.2 - Forms.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Insurance Carrier's Agreement and Undertaking. (5) LS-276 Application for Security Deposit Determination. (6... OWCP district offices and on the Internet at http://www.dol.gov/esa/owcp/dlhwc/lsforms.htm. ...

  15. 20 CFR 703.2 - Forms.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Insurance Carrier's Agreement and Undertaking. (5) LS-276 Application for Security Deposit Determination. (6... OWCP district offices and on the Internet at http://www.dol.gov/esa/owcp/dlhwc/lsforms.htm. ...

  16. Nasal septal hematoma

    MedlinePlus

    ... medlineplus.gov/ency/article/001292.htm Nasal septal hematoma To use the sharing features on this page, please enable JavaScript. A nasal septal hematoma is a collection of blood within the septum ...

  17. Mechanical ventilator - infants

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007240.htm Mechanical ventilator - infants To use the sharing features on this page, please enable JavaScript. A mechanical ventilator is a machine that assists with breathing. ...

  18. Lymph system

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002247.htm Lymph system To use the sharing features on this page, ... urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. follows ...

  19. CT scan

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003330.htm CT scan To use the sharing features on this page, please enable JavaScript. A computed tomography (CT) scan is an imaging method that uses x- ...

  20. Liposuction - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100185.htm Liposuction - series—Indications To use the sharing features on ... can gain fat in the belly and waist. Liposuction may help people who want to have less ...

  1. Congenital heart disease

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001114.htm Congenital heart disease To use the sharing features on this page, please enable JavaScript. Congenital heart disease (CHD) is a problem with the heart's structure ...

  2. Hypertensive heart disease

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/000163.htm Hypertensive heart disease To use the sharing features on this page, please enable JavaScript. Hypertensive heart disease refers to heart problems that occur because of ...

  3. CSF smear

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003768.htm CSF smear To use the sharing features on this ... around the spinal cord and brain. Cerebrospinal fluid (CSF) protects the brain and spinal cord from injury. ...

  4. Sports physical

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000673.htm Sports physical To use the sharing features on this ... or routine checkups. Why do you Need a Sports Physical? The sports physical is done to: Find ...

  5. Tarantula spider

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002855.htm Tarantula spider bite To use the sharing features on this ... This article describes the effects of a tarantula spider bite. The class of insects to which the ...

  6. Black widow spider

    MedlinePlus

    ... medlineplus.gov/ency/article/002858.htm Black widow spider To use the sharing features on this page, please enable JavaScript. The black widow spider (Latrodectus) has a shiny black body with a ...

  7. Increased head circumference

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003305.htm Increased head circumference To use the sharing features on this page, please enable JavaScript. Increased head circumference is when the measured distance around the widest ...

  8. Swimming pool granuloma

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001357.htm Swimming pool granuloma To use the sharing features on this page, please enable JavaScript. A swimming pool granuloma is a long-term (chronic) skin ...

  9. Amylase - urine

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003607.htm Amylase - urine To use the sharing features on this page, ... test that measures the amount of amylase in urine. Amylase is an enzyme that helps digest carbohydrates. ...

  10. Urine output - decreased

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003147.htm Urine output - decreased To use the sharing features on this page, please enable JavaScript. Decreased urine output means that you produce less urine than ...

  11. Urine concentration test

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003608.htm Urine concentration test To use the sharing features on this page, please enable JavaScript. A urine concentration test measures the ability of the kidneys ...

  12. Gallbladder removal - slideshow

    MedlinePlus

    ... ency/presentations/100021.htm Gallbladder removal - Series—Normal anatomy To use the ... gallbladder is located in the abdomen, on the right side, underneath the liver. The gallbladder stores bile produced by the liver, ...

  13. Dirt - swallowing

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002840.htm Dirt - swallowing To use the sharing features on this ... article is about poisoning from swallowing or eating dirt. This article is for information only. DO NOT ...

  14. Genetic counseling

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000510.htm Genetic counseling To use the sharing features on this ... cystic fibrosis or Down syndrome. Who May Want Genetic Counseling? It is up to you whether or ...

  15. RBC nuclear scan

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003835.htm RBC nuclear scan To use the sharing features on this page, please enable JavaScript. An RBC nuclear scan uses small amounts of radioactive material to ...

  16. Skin color - patchy

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003224.htm Skin color - patchy To use the sharing features on this page, please enable JavaScript. Patchy skin color is areas where the skin color is irregular. ...

  17. Talking to someone with hearing loss

    MedlinePlus

    ... of Health & Human Services. Quick guide to health literacy and older adults: Hearing impairment. Health.gov website. www.health.gov/communication/literacy/olderadults/hearing.htm . Accessed July 5, 2017. Review ...

  18. Jerusalem cherry poisoning

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002871.htm Jerusalem cherry poisoning To use the sharing features on this page, please enable JavaScript. The Jerusalem cherry is a plant that belongs to the ...

  19. Aspirin overdose

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002542.htm Aspirin overdose To use the sharing features on this page, please enable JavaScript. An overdose of aspirin means you have too much aspirin in your ...

  20. Optimized Structures for Low-Profile Phase Change Thermal Spreaders

    NASA Astrophysics Data System (ADS)

    Sharratt, Stephen Andrew

    Thin, low-profile phase change thermal spreaders can provide cooling solutions for some of today's most pressing heat flux dissipation issues. These thermal issues are only expected to increase as future electronic circuitry requirements lead to denser and potentially 3D chip packaging. Phase change based heat spreaders, such as heat pipes or vapor chambers, can provide a practical solution for effectively dissipating large heat fluxes. This thesis reports a comprehensive study of state-of-the-art capillary pumped wick structures using computational modeling, micro wick fabrication, and experimental analysis. Modeling efforts focus on predicting the shape of the liquid meniscus inside a complicated 3D wick structure. It is shown that this liquid shape can drastically affect the wick's thermal resistance. In addition, knowledge of the liquid meniscus shape allows for the computation of key parameters such as permeability and capillary pressure which are necessary for predicting the maximum heat flux. After the model is validated by comparison to experimental results, the wick structure is optimized so as to decrease overall wick thermal resistance and increase the maximum capillary limited heat flux before dryout. The optimized structures are then fabricated out of both silicon and copper using both traditional and novel micro-fabrication techniques. The wicks are made super-hydrophilic using chemical and thermal oxidation schemes. A sintered monolayer of Cu particles is fabricated and analyzed as well. The fabricated wick structures are experimentally tested for their heat transfer performance inside a well controlled copper vacuum chamber. Heat fluxes as high as 170 W/cm2 are realized for Cu wicks with structure heights of 100 μm. The structures optimized for both minimized thermal resistance and high liquid supply ability perform much better than their non-optimized counterparts. The super-hydrophilic oxidation scheme is found to drastically increase the maximum heat flux and decrease thermal resistance. This research provides key insights as to how to optimize heat pipe structures to minimize thermal resistance and increase maximum heat flux. These thin wick structures can also be combined with a thicker liquid supply layer so that thin, low-resistance evaporator layers can be constructed and higher heat fluxes realized. The work presented in this thesis can be used to aid in the development of high-performance phase change thermal spreaders, allowing for temperature control of a variety of powerful electronic components.

  1. Unfolding of Ubiquitin Studied by Picosecond Time-Resolved Fluorescence of the Tyrosine Residue

    PubMed Central

    Noronha, Melinda; Lima, João C.; Bastos, Margarida; Santos, Helena; Maçanita, António L.

    2004-01-01

    The photophysics of the single tyrosine in bovine ubiquitin (UBQ) was studied by picosecond time-resolved fluorescence spectroscopy, as a function of pH and along thermal and chemical unfolding, with the following results: First, at room temperature (25°C) and below pH 1.5, native UBQ shows single-exponential decays. From pH 2 to 7, triple-exponential decays were observed and the three decay times were attributed to the presence of tyrosine, a tyrosine-carboxylate hydrogen-bonded complex, and excited-state tyrosinate. Second, at pH 1.5, the water-exposed tyrosine of either thermally or chemically unfolded UBQ decays as a sum of two exponentials. The double-exponential decays were interpreted and analyzed in terms of excited-state intramolecular electron transfer from the phenol to the amide moiety, occurring in one of the three rotamers of tyrosine in UBQ. The values of the rate constants indicate the presence of different unfolded states and an increase in the mobility of the tyrosine residue during unfolding. Finally, from the pre-exponential coefficients of the fluorescence decays, the unfolding equilibrium constants (KU) were calculated, as a function of temperature or denaturant concentration. Despite the presence of different unfolded states, both thermal and chemical unfolding data of UBQ could be fitted to a two-state model. The thermodynamic parameters Tm = 54.6°C, ΔHTm = 56.5 kcal/mol, and ΔCp = 890 cal/mol//K, were determined from the unfolding equilibrium constants calculated accordingly, and compared to values obtained by differential scanning calorimetry also under the assumption of a two-state transition, Tm = 57.0°C, ΔHm= 51.4 kcal/mol, and ΔCp = 730 cal/mol//K. PMID:15454455

  2. Brain injury - discharge

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000163.htm Brain injury - discharge To use the sharing features on ... know was in the hospital for a serious brain injury. At home, it will take time for ...

  3. CPR - infant - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100216.htm CPR - infant - series—Check for responsiveness To use the ... yourself to call 911 until you have performed CPR for about 2 minutes. 3. Carefully place the ...

  4. Hemorrhoid surgery - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100026.htm Hemorrhoid surgery - series—Normal anatomy To use the sharing ... empties stool from the body through the anus. Hemorrhoids are "cushions" of tissue filled with blood vessels ...

  5. Stroke - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100218.htm Stroke - series—Part 1 To use the sharing features ... M. Editorial team. Related MedlinePlus Health Topics Ischemic Stroke A.D.A.M., Inc. is accredited by ...

  6. Exercise and immunity

    MedlinePlus

    ... medlineplus.gov/ency/article/007165.htm Exercise and immunity To use the sharing features on this page, ... know exactly if or how exercise increases your immunity to certain illnesses. There are several theories. However, ...

  7. Paroxysmal cold hemoglobinuria (PCH)

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/000557.htm Paroxysmal cold hemoglobinuria (PCH) To use the sharing features on this page, please enable JavaScript. Paroxysmal cold hemoglobinuria (PCH) is a rare blood disorder in ...

  8. Hand fracture - aftercare

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000552.htm Hand fracture - aftercare To use the sharing features on ... need to be repaired with surgery. Types of Hand Fractures Your fracture may be in one of ...

  9. Claw hand

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003169.htm Claw hand To use the sharing features on this page, ... Duplication for commercial use must be authorized in writing by ADAM Health Solutions. About MedlinePlus Site Map ...

  10. Concussion - child - discharge

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000125.htm Concussion in children - discharge To use the sharing features ... child's provider about: Playing contact sports, such as football, hockey, and soccer Riding a bicycle, motorcycle, or ...

  11. Post-traumatic stress disorder

    MedlinePlus

    ... medlineplus.gov/ency/article/000925.htm Post-traumatic stress disorder To use the sharing features on this page, please enable JavaScript. Post-traumatic stress disorder (PTSD) is a type of anxiety disorder . ...

  12. Overcoming job stress

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000884.htm Overcoming job stress To use the sharing features on this page, ... stay healthy and feel better. Causes of Job Stress Although the cause of job stress is different ...

  13. Total parenteral nutrition - infants

    MedlinePlus

    ... medlineplus.gov/ency/article/007239.htm Total parenteral nutrition - infants To use the sharing features on this page, please enable JavaScript. Total parenteral nutrition (TPN) is a method of feeding that bypasses ...

  14. Breathing difficulty

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003075.htm Breathing difficulty To use the sharing features on this page, ... Duplication for commercial use must be authorized in writing by ADAM Health Solutions. About MedlinePlus Site Map ...

  15. Hormonal effects in newborns

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001911.htm Hormonal effects in newborns To use the sharing features on this page, please enable JavaScript. Hormonal effects in newborns occur because in the womb, babies ...

  16. Desipramine

    MedlinePlus

    ... www.fda.gov/Drugs/DrugSafety/ucm085729.htm.No matter your age, before you take an antidepressant, you, ... seeing things that do not exist) widened pupils (dark circles in the middle of the eyes) drowsiness ...

  17. Collagen vascular disease

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001223.htm Collagen vascular disease To use the sharing features on ... were previously said to have "connective tissue" or "collagen vascular" disease. We now have names for many ...

  18. Memory loss

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003257.htm Memory loss To use the sharing features on this ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

  19. ECHO virus

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001340.htm ECHO virus To use the sharing features on this page, please enable JavaScript. Enteric cytopathic human orphan (ECHO) viruses are a group of viruses that can lead ...

  20. Gleason grading system

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000920.htm Gleason grading system To use the sharing features on this page, ... score of between 5 and 7. Gleason Grading System Sometimes, it can be hard to predict how ...

  1. GI bleeding - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100162.htm GI bleeding - series—Normal anatomy To use the sharing ... colon, and finally, the rectum and anus. The GI tract is a long, hollow, muscular tube through ...

  2. Pancreas transplant - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100129.htm Pancreas transplant - series—Normal anatomy To use the sharing ... to slide 6 out of 6 Overview The pancreas resides in the back of the abdomen. It ...

  3. Nasal fracture - aftercare

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000554.htm Nasal fracture - aftercare To use the sharing features on this ... that gives your nose its shape. A nasal fracture occurs when the bony part of your nose ...

  4. Obesity hypoventilation syndrome (OHS)

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000085.htm Obesity hypoventilation syndrome (OHS) To use the sharing features on this page, please enable JavaScript. Obesity hypoventilation syndrome (OHS) is a condition in some ...

  5. Factor V deficiency

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000550.htm Factor V deficiency To use the sharing features on ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

  6. Factor II assay

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003674.htm Factor II assay To use the sharing features on ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

  7. Separation anxiety in children

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001542.htm Separation anxiety in children To use the sharing features on this page, please enable JavaScript. Separation anxiety in children is a developmental stage in which ...

  8. 76 FR 59404 - Gastrointestinal Drugs Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-26

    ... Pharmaceuticals, Inc., for irritable bowel syndrome with diarrhea. FDA intends to make background material...Committees/Calendar/default.htm . Scroll down to the appropriate advisory committee link. Procedure...

  9. Asthma - child - discharge

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000001.htm Asthma - child - discharge To use the sharing features on this ... care for your child. Take Charge of Your Child's Asthma at Home Make sure you know the ...

  10. Storing your medicines

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000534.htm Storing your medicines To use the sharing features on this page, ... child latch or lock. Do not use Damaged Medicine Damaged medicine may make you sick. DO NOT ...

  11. Temperature measurement

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003400.htm Temperature measurement To use the sharing features on this page, please enable JavaScript. The measurement of body temperature can help detect illness. It can also monitor ...

  12. Amebic liver abscess

    MedlinePlus

    ... abscess URL of this page: //medlineplus.gov/ency/article/000211.htm Amebic liver abscess To use the sharing features on this page, please enable JavaScript. Amebic liver abscess is a collection of pus ...

  13. Patent ductus arteriosus

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001560.htm Patent ductus arteriosus To use the sharing features on this page, please enable JavaScript. Patent ductus arteriosus (PDA) is a condition in which the ductus ...

  14. Bubble bath soap poisoning

    MedlinePlus

    ... medlineplus.gov/ency/article/002762.htm Bubble bath soap poisoning To use the sharing features on this page, please enable JavaScript. Bubble bath soap poisoning occurs when someone swallows bubble bath soap. ...

  15. Digital rectal exam

    MedlinePlus

    Skip navigation U.S. National Library of Medicine The navigation menu has been collapsed. Menu ... exam URL of this page: //medlineplus.gov/ency/article/007069.htm Digital rectal exam To use the sharing features ...

  16. Learning about depression

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000325.htm Learning about depression To use the sharing features on this page, ... trigger or reason. What are the Signs of Depression? You may notice some or all of the ...

  17. Acute respiratory distress syndrome

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/000103.htm Acute respiratory distress syndrome To use the sharing features on this page, please enable JavaScript. Acute respiratory distress syndrome (ARDS) is a life-threatening lung ...

  18. Acetaminophen and codeine overdose

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002562.htm Acetaminophen and codeine overdose To use the sharing features on this page, please enable JavaScript. Acetaminophen (Tylenol) and codeine is a prescription pain medicine. ...

  19. 48 CFR 2901.602-1 - Authority.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ACQUISITION REGULATION SYSTEM Career Development, Contracting Authority, and Responsibilities 2901.602-1... officers may be available for review on the Internet at http://www.dol.gov/oasam/grants/prgms.htm. To...

  20. Castor oil overdose

    MedlinePlus

    ... overdose URL of this page: //medlineplus.gov/ency/article/002768.htm Castor oil overdose To use the sharing features on this page, please enable JavaScript. Castor oil is a yellowish liquid often used ...

  1. Lip moisturizer poisoning

    MedlinePlus

    ... poisoning URL of this page: //medlineplus.gov/ency/article/002723.htm Lip moisturizer poisoning To use the sharing features on this page, please enable JavaScript. This poisoning results from eating or swallowing lip ...

  2. Face powder poisoning

    MedlinePlus

    ... poisoning URL of this page: //medlineplus.gov/ency/article/002700.htm Face powder poisoning To use the sharing features on this page, please enable JavaScript. Face powder poisoning occurs when someone swallows or ...

  3. Rhubarb leaves poisoning

    MedlinePlus

    ... poisoning URL of this page: //medlineplus.gov/ency/article/002876.htm Rhubarb leaves poisoning To use the sharing features on this page, please enable JavaScript. Rhubarb leaves poisoning occurs when someone eats pieces ...

  4. Nail polish poisoning

    MedlinePlus

    ... poisoning URL of this page: //medlineplus.gov/ency/article/002722.htm Nail polish poisoning To use the sharing features on this page, please enable JavaScript. This poisoning is from swallowing or breathing in ( ...

  5. Heat intolerance

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003094.htm Heat intolerance To use the sharing features on this ... must be authorized in writing by ADAM Health Solutions. About MedlinePlus Site Map FAQs Customer Support Get ...

  6. Cow's milk - infants

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002448.htm Cow's milk - infants To use the sharing features on ... year old, you should not feed your baby cow's milk, according to the American Academy of Pediatrics ( ...

  7. Delta agent (Hepatitis D)

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000216.htm Hepatitis D (Delta agent) To use the sharing features on this page, please enable JavaScript. Hepatitis D is a viral infection caused by the ...

  8. Urine specific gravity test

    MedlinePlus

    ... medlineplus.gov/ency/article/003587.htm Urine specific gravity test To use the sharing features on this page, please enable JavaScript. Urine specific gravity is a laboratory test that shows the concentration ...

  9. Culture - joint fluid

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003742.htm Culture - joint fluid To use the sharing features on this page, please enable JavaScript. Joint fluid culture is a laboratory test to detect infection-causing ...

  10. Omphalocele repair - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100033.htm Omphalocele repair - series—Normal anatomy To use the sharing ... Go to slide 4 out of 4 Overview Omphalocele is an abdominal wall defect at the base ...

  11. Prostate radiation - discharge

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000399.htm Prostate radiation - discharge To use the sharing features on ... keeping or getting an erection may occur after prostate radiation therapy. You may not notice this problem ...

  12. Body mass index

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/007196.htm Body mass index To use the sharing features on this ... your height is to figure out your body mass index (BMI). You and your health care provider ...

  13. Anal fissure - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100154.htm Anal fissure - series—Normal anatomy To use the sharing ... rectum through which passes stool during defecation. The anal sphincter is a critical mechanism for control of ...

  14. Seasonal variation in thermal tolerance, oxygen consumption, antioxidative enzymes and non-specific immune indices of Indian hill trout, Barilius bendelisis (Hamilton, 1807) from central Himalaya, India.

    PubMed

    Sharma, Neeraj Kumar; Akhtar, M S; Pandey, Nityanand; Singh, Ravindra; Singh, Atul Kumar

    2015-08-01

    We studied the season dependent thermal tolerance, oxygen consumption, respiratory burst response and antioxidative enzyme activities in juveniles of Barilius bendelisis. The critical thermal maximum (CTmax), lethal thermal maximum (LTmax), critical thermal minimum (CTmin) and lethal thermal minimum (LTmin) were significantly different at five different seasons viz. winter (10.64°C), spring (16.25°C), summer (22.11°C), rainy (20.87°C) and autumn (17.77°C). The highest CTmax was registered in summer (36.02°C), and lowest CTmin was recorded during winter (2.77°C). Water temperature, dissolved oxygen and pH were strongly related to CTmax, LTmax, CTmin and LTmin suggesting seasonal acclimatization of B. bendelisis. The thermal tolerance polygon area of the B. bendelisis juveniles within the range of seasonal temperature (10.64-22.11°C) was calculated as 470.92°C(2). Oxygen consumption rate was significantly different (p<0.05) between seasons with maximum value during summer (57.66mgO2/kg/h) and lowest in winter (32.60mgO2/kg/h). Total white blood cell count including neutrophil and monocytes also showed significant difference (p<0.05) between seasons with maximum value during summer and minimum number in winter and were found correlated to temperature, dissolved oxygen, pH and respiratory burst activity. Respiratory burst activity of blood phagocytes significantly differed (p<0.05) among seasons with higher value during summer (0.163 OD540nm) and minimum in winter season (0.054 OD540nm). The activity of superoxide dismutase, catalase and glutathione-s-transferase both in liver and gill, also varied significantly (p<0.05) during different seasons. Overall results of this study suggest that multiple environmental factors play a role in seasonal acclimation in B. bendelisis, which modulate the thermal tolerance, oxygen consumption, respiratory burst activity and status of anti-oxidative potential in wild environment. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Coupling diffusion and maximum entropy models to estimate thermal inertia

    USDA-ARS?s Scientific Manuscript database

    Thermal inertia is a physical property of soil at the land surface related to water content. We have developed a method for estimating soil thermal inertia using two daily measurements of surface temperature, to capture the diurnal range, and diurnal time series of net radiation and specific humidi...

  16. Hypospadias repair - discharge

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000158.htm Hypospadias repair - discharge To use the sharing features on this page, please enable JavaScript. Your child had hypospadias repair to fix a birth defect in which ...

  17. Iron Test

    MedlinePlus

    ... 793, 826-827. Harmening D, Clinical Hematology and Fundamentals of Hemostasis, Fifth Edition, F.A. Davis Company, ... htm. Accessed June 2009. Henry's Clinical Diagnosis and Management by Laboratory Methods . 21st ed. McPherson RA and ...

  18. Aging changes in immunity

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/004008.htm Aging changes in immunity To use the sharing features ... cells and antibodies that destroy these harmful substances. AGING CHANGES AND THEIR EFFECTS ON THE IMMUNE SYSTEM ...

  19. Aging changes in sleep

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/004018.htm Aging changes in sleep To use the sharing features ... cycle is repeated several times during the night. AGING CHANGES With aging, sleep patterns tend to change. ...

  20. Exercising on a budget

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000762.htm Exercising on a budget To use the sharing features ... make sure you are walking fast enough to benefit your health. If you can talk, but not ...

  1. 50 CFR 660.707 - Permits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... or downloaded from the Southwest Region home page (http://swr.nmfs.noaa.gov/permits.htm) to apply for... the vessel is fishing for, taking, retaining, possessing, or landing HMS shoreward of the outer...

  2. 50 CFR 660.707 - Permits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... or downloaded from the Southwest Region home page (http://swr.nmfs.noaa.gov/permits.htm) to apply for... the vessel is fishing for, taking, retaining, possessing, or landing HMS shoreward of the outer...

  3. Funnel-web spider bite

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002844.htm Funnel-web spider bite To use the sharing features on ... the effects of a bite from the funnel-web spider. Male funnel-web spiders are more poisonous ...

  4. Hand lotion poisoning

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002708.htm Hand lotion poisoning To use the sharing features on ... Duplication for commercial use must be authorized in writing by ADAM Health Solutions. About MedlinePlus Site Map ...

  5. Hand x-ray

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003811.htm Hand x-ray To use the sharing features on ... Duplication for commercial use must be authorized in writing by ADAM Health Solutions. About MedlinePlus Site Map ...

  6. Metatarsal stress fractures - aftercare

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000553.htm Metatarsal stress fractures - aftercare To use the sharing features on ... that connect your ankle to your toes. A stress fracture is a break in the bone that ...

  7. Attention deficit hyperactivity disorder (ADHD)

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001551.htm Attention deficit hyperactivity disorder To use the sharing features on this page, please enable JavaScript. Attention deficit hyperactivity disorder (ADHD) is a problem caused ...

  8. Abortion - surgical - aftercare

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000658.htm Abortion - surgical - aftercare To use the sharing features on ... please enable JavaScript. You have had a surgical abortion. This is a procedure that ends pregnancy by ...

  9. Pneumonia - adults - discharge

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000017.htm Pneumonia in adults - discharge To use the sharing features on this page, please enable JavaScript. You have pneumonia, which is an infection in your lungs. Now ...

  10. Hip joint replacement - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100006.htm Hip joint replacement - series—Normal anatomy To use the ... to slide 5 out of 5 Overview The hip joint is made up of two major parts: ...

  11. Preventing falls

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000052.htm Preventing falls To use the sharing features on this page, please enable JavaScript. People with medical problems are at risk of falling or tripping. This can result in ...

  12. 7 CFR 1779.52 - Processing.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.52 Processing. (a) Preapplications. (1... any Agency State Office or online at http://www.usda.gov/rus/water/ees/index.htm); (4) Preliminary...

  13. Sacroiliac joint pain - aftercare

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000610.htm Sacroiliac joint pain - aftercare To use the sharing features on this page, please enable JavaScript. The sacroiliac joint (SIJ) is a term used to describe ...

  14. How to research cancer

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000927.htm How to research cancer To use the sharing features on this ... to government sources and medical associations. They provide research-based, up-to-date information about all types ...

  15. Dental care - child

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002213.htm Dental care - child To use the sharing features on ... please enable JavaScript. Proper care of your child's teeth and gums includes brushing and rinsing daily. It ...

  16. Brushing Your Child's Teeth

    MedlinePlus

    ... gov/ency/patientinstructions/000769.htm Brushing Your Child's Teeth To use the sharing features on this page, ... age. Taking care of your child's gums and teeth every day helps prevent tooth decay and gum ...

  17. Pneumonia - weakened immune system

    MedlinePlus

    ... gov/ency/article/000093.htm Pneumonia - weakened immune system To use the sharing features on this page, ... urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. follows ...

  18. Human bites - self-care

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000736.htm Human bites - self-care To use the sharing features ... at higher risk for infection. How to Prevent Human Bites Prevent bites by: Teaching young children not ...

  19. Gastroesophageal reflux in infants

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001134.htm Gastroesophageal reflux in infants To use the sharing features on this page, please enable JavaScript. Gastroesophageal reflux occurs when stomach contents leak backward from the ...

  20. Medical marijuana

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000899.htm Medical marijuana To use the sharing features on this page, ... have legalized marijuana for medical use. How Does Medical Marijuana Work? Medical marijuana may be: Smoked Vaporized Eaten ...

  1. CSF oligoclonal banding - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100145.htm CSF oligoclonal banding - series—Normal anatomy To use the ... 5 out of 5 Overview The cerebrospinal fluid (CSF) serves to supply nutrients to the central nervous ...

  2. Birth control pills overdose

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/002599.htm Birth control pill overdose To use the sharing features on ... the medicine was prescribed for the person Poison Control Your local poison center can be reached directly ...

  3. Birth control pill - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100108.htm Birth control pill - series—Normal female anatomy To use the ... produce a successful pregnancy. To prevent pregnancy, birth control pills affect how these organs normally function. Review ...

  4. Depression - stopping your medicines

    MedlinePlus

    ... gov/ency/patientinstructions/000570.htm Depression - stopping your medicines To use the sharing features on this page, ... no longer taking them. Before You Stop Your Medicine Stopping your medicine may be the right choice ...

  5. Taking multiple medicines safely

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000883.htm Taking multiple medicines safely To use the sharing features on this ... directed. Why You May Need More Than One Medicine You may take more than one medicine to ...

  6. Small bowel resection - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100039.htm Small bowel resection - series—Normal anatomy To use the ... to slide 5 out of 5 Overview The small intestine absorbs much of the liquid from foods. ...

  7. 14 CFR 1260.6 - Publication.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... § 1260.6 Publication. The official site for accessing the NASA Grant and Cooperative Agreement Handbook, including current Grant Notices, is on the internet at: http://ec.msfc.nasa.gov/hq/grcover.htm ...

  8. 14 CFR 1260.6 - Publication.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... § 1260.6 Publication. The official site for accessing the NASA Grant and Cooperative Agreement Handbook, including current Grant Notices, is on the internet at: http://ec.msfc.nasa.gov/hq/grcover.htm ...

  9. 14 CFR 1260.6 - Publication.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... § 1260.6 Publication. The official site for accessing the NASA Grant and Cooperative Agreement Handbook, including current Grant Notices, is on the internet at: http://ec.msfc.nasa.gov/hq/grcover.htm ...

  10. 14 CFR 1260.6 - Publication.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... § 1260.6 Publication. The official site for accessing the NASA Grant and Cooperative Agreement Handbook, including current Grant Notices, is on the internet at: http://ec.msfc.nasa.gov/hq/grcover.htm ...

  11. Low blood sugar - newborns

    MedlinePlus

    ... medlineplus.gov/ency/article/007306.htm Low blood sugar - newborns To use the sharing features on this page, please enable JavaScript. A low blood sugar level in newborn babies is also called neonatal ...

  12. Healthy food trends -- microgreens

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000730.htm Healthy food trends - microgreens To use the sharing features on this ... your local health food store or natural foods market. Look near the lettuce for packages of greens ...

  13. Chin augmentation - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100009.htm Chin augmentation - series—Normal anatomy To use the sharing features ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

  14. Breast augmentation - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100205.htm Breast augmentation - series—Normal anatomy To use the sharing features ... Bethesda, MD 20894 U.S. Department of Health and Human Services National Institutes of Health Page last updated: ...

  15. Breastfeeding vs. Formula Feeding

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000803.htm Breastfeeding vs. formula feeding To use the sharing features ... best for you and your family. Benefits of Breastfeeding Breastfeeding is a wonderful way to bond with ...

  16. Hydrocodone and acetaminophen overdose

    MedlinePlus

    ... medlineplus.gov/ency/article/002670.htm Hydrocodone and acetaminophen overdose To use the sharing features on this ... painkiller in the opioid family (related to morphine). Acetaminophen is an over-the-counter medicine used to ...

  17. Cleaning supplies and equipment

    MedlinePlus

    ... gov/ency/patientinstructions/000443.htm Cleaning supplies and equipment To use the sharing features on this page, ... to clean supplies and equipment. Disinfecting Supplies and Equipment Start by wearing the right personal protective equipment ( ...

  18. 78 FR 8179 - Proposed Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-05

    ... panels of experts in hydrology, hydraulics, and other pertinent sciences established to review.../dnr/water/7359.htm Town of Medaryville Town Hall, 409 East Main Street, Medaryville, IN 47957. Town of...

  19. 78 FR 5824 - Proposed Flood Hazard Determinations

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-01-28

    ... resolution process. SRPs are independent panels of experts in hydrology, hydraulics, and other pertinent..., and Incorporated Areas Maps Available for Inspection Online at: http://www.in.gov/dnr/water/6396.htm...

  20. Asthma and Hispanic Americans

    MedlinePlus

    ... as bronchitis. Children living below or near the poverty level are more likely to have high levels ... www.cdc.gov/nchs/hdi.htm The proportional impact of asthma prevalence, health care use and mortality ...

  1. Breast reduction (mammoplasty) - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100189.htm Breast reduction (mammoplasty) - series—Indications To use the sharing features ... Lickstein, MD, FACS, specializing in cosmetic and reconstructive plastic surgery, Palm Beach Gardens, FL. Review provided by ...

  2. Palliative care - managing pain

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000532.htm Palliative care - managing pain To use the sharing features on this page, please enable JavaScript. Palliative care is a holistic approach to care that focuses ...

  3. Uric acid - urine

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003616.htm Uric acid urine test To use the sharing features on this page, please enable JavaScript. The uric acid urine test measures the level of uric acid ...

  4. Forward Masking in Cochlear Implant Users: Electrophysiological and Psychophysical Data Using Pulse Train Maskers.

    PubMed

    Adel, Youssef; Hilkhuysen, Gaston; Noreña, Arnaud; Cazals, Yves; Roman, Stéphane; Macherey, Olivier

    2017-06-01

    Electrical stimulation of auditory nerve fibers using cochlear implants (CI) shows psychophysical forward masking (pFM) up to several hundreds of milliseconds. By contrast, recovery of electrically evoked compound action potentials (eCAPs) from forward masking (eFM) was shown to be more rapid, with time constants no greater than a few milliseconds. These discrepancies suggested two main contributors to pFM: a rapid-recovery process due to refractory properties of the auditory nerve and a slow-recovery process arising from more central structures. In the present study, we investigate whether the use of different maskers between eCAP and psychophysical measures, specifically single-pulse versus pulse train maskers, may have been a source of confound.In experiment 1, we measured eFM using the following: a single-pulse masker, a 300-ms low-rate pulse train masker (LTM, 250 pps), and a 300-ms high-rate pulse train masker (HTM, 5000 pps). The maskers were presented either at same physical current (Φ) or at same perceptual (Ψ) level corresponding to comfortable loudness. Responses to a single-pulse probe were measured for masker-probe intervals ranging from 1 to 512 ms. Recovery from masking was much slower for pulse trains than for the single-pulse masker. When presented at Φ level, HTM produced more and longer-lasting masking than LTM. However, results were inconsistent when LTM and HTM were compared at Ψ level. In experiment 2, masked detection thresholds of single-pulse probes were measured using the same pulse train masker conditions. In line with our eFM findings, masked thresholds for HTM were higher than those for LTM at Φ level. However, the opposite result was found when the pulse trains were presented at Ψ level.Our results confirm the presence of slow-recovery phenomena at the level of the auditory nerve in CI users, as previously shown in animal studies. Inconsistencies between eFM and pFM results, despite using the same masking conditions, further underline the importance of comparing electrophysiological and psychophysical measures with identical stimulation paradigms.

  5. Breast cancer staging

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000911.htm Breast cancer staging To use the sharing features on this ... Once your health care team knows you have breast cancer , they will do more tests to stage it. ...

  6. Chiropractic care for back pain

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000416.htm Chiropractic care for back pain To use the sharing ... discussed in your first session. What Conditions Does Chiropractic Treat Best? Chiropractic treatment is most effective for: ...

  7. Skin graft - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100100.htm Skin graft - series—Normal anatomy To use the sharing features ... entire body, and acts as a protective barrier. Skin grafts may be recommended for: Extensive wounds Burns Specific ...

  8. Aging changes in the breast

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003999.htm Aging changes in the breast To use the sharing ... chap 198. Walston JD. Common clinical sequelae of aging. In: Goldman L, Schafer AI, eds. Goldman-Cecil ...

  9. Aging changes in vital signs

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/004019.htm Aging changes in vital signs To use the sharing ... Normal body temperature does not change much with aging. But as you get older, it becomes harder ...

  10. Aging changes in the lungs

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/004011.htm Aging changes in the lungs To use the sharing ... out (exhaled). Watch this video about: Gas exchange AGING CHANGES IN YOUR BODY AND THEIR AFFECTS ON ...

  11. Aging changes in the face

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/004004.htm Aging changes in the face To use the sharing ... face with age References Brodie SE, Francis JH. Aging and disorders of the eye. In: Fillit HM, ...

  12. Aging changes in hormone production

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/004000.htm Aging changes in hormone production To use the sharing ... that produce hormones are controlled by other hormones. Aging also changes this process. For example, an endocrine ...

  13. Epilepsy or seizures - discharge

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000128.htm Epilepsy or seizures - discharge To use the sharing features on this page, please enable JavaScript. You have epilepsy . People with epilepsy have seizures. A seizure is ...

  14. Paget disease of the bone

    MedlinePlus

    ... ency/article/000414.htm Paget disease of the bone To use the sharing features on this page, ... Paget disease is a disorder that involves abnormal bone destruction and regrowth. This results in deformity of ...

  15. Hand-foot-mouth disease

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000965.htm Hand-foot-mouth disease To use the sharing features ... Duplication for commercial use must be authorized in writing by ADAM Health Solutions. About MedlinePlus Site Map ...

  16. Enteral nutrition - child - managing problems

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000164.htm Enteral nutrition - child - managing problems To use the sharing features ... trouble breathing, call 911. References Mcclave SA. Enteral nutrition. In: Goldman L, Schafer AI, eds. Goldman-Cecil ...

  17. Partial knee replacement - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100225.htm Partial knee replacement - series—Normal anatomy To use the sharing ... A.M. Editorial team. Related MedlinePlus Health Topics Knee Replacement A.D.A.M., Inc. is accredited ...

  18. Understanding cardiovascular disease

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000759.htm Understanding cardiovascular disease To use the sharing features on this page, ... lead to heart attack or stroke. Types of Cardiovascular Disease Coronary heart disease (CHD) is the most common ...

  19. Urination - difficulty with flow

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003143.htm Urination - difficulty with flow To use the sharing features on ... Duplication for commercial use must be authorized in writing by ADAM Health Solutions. About MedlinePlus Site Map ...

  20. Dental plaque identification at home

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003426.htm Dental plaque identification at home To use the sharing ... a sticky substance that collects around and between teeth. The home dental plaque identification test shows where ...

  1. Twin-to-twin transfusion syndrome

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001595.htm Twin-to-twin transfusion syndrome To use the sharing features on this page, please enable JavaScript. Twin-to-twin transfusion syndrome is a rare condition ...

  2. CT angiography - abdomen and pelvis

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007674.htm CT angiography - abdomen and pelvis To use the sharing features on this page, please enable JavaScript. CT angiography combines a CT scan with the injection ...

  3. CT angiography - arms and legs

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007675.htm CT angiography - arms and legs To use the sharing features on this page, please enable JavaScript. CT angiography combines a CT scan with the injection ...

  4. CT angiography - head and neck

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007677.htm CT angiography - head and neck To use the sharing features on this page, please enable JavaScript. CT angiography (CTA) combines a CT scan with the ...

  5. Skin - abnormally dark or light

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003242.htm Abnormally dark or light skin To use the sharing features ... The bronze color can range from light to dark (in fair-skinned people) with the degree of ...

  6. Home apnea monitor use - infants

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000755.htm Home apnea monitor use - infants To use the sharing ... portable. Why is an Apnea Monitor Used at Home? A monitor may be needed when: Your baby ...

  7. Gastroesophageal reflux - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100181.htm Gastroesophageal reflux - series—Normal anatomy To use the sharing features ... A.M. Editorial team. Related MedlinePlus Health Topics GERD A.D.A.M., Inc. is accredited by ...

  8. Spleen removal - open - adults - discharge

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000287.htm Spleen removal - open - adults - discharge To use the sharing features on ... The type of surgery you had is called open surgery. The surgeon made a cut (incision) in ...

  9. Large for gestational age (LGA)

    MedlinePlus

    ... gov/ency/article/002248.htm Large for gestational age (LGA) To use the sharing features on this page, please enable JavaScript. Large for gestational age means that a fetus or infant is larger ...

  10. Brain aneurysm repair - discharge

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000123.htm Brain aneurysm repair - discharge To use the sharing features ... this page, please enable JavaScript. You had a brain aneurysm . An aneurysm is a weak area in ...

  11. Vacation health care

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001937.htm Vacation health care To use the sharing features on this page, ... and help you avoid problems. Talk to your health care provider or visit a travel clinic 4 to ...

  12. High blood pressure - children

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007696.htm High blood pressure - children To use the sharing features on this page, please enable JavaScript. High blood pressure (hypertension) is an increase in the force of ...

  13. Multiple sclerosis - discharge

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000129.htm Multiple sclerosis - discharge To use the sharing features on this ... Your doctor has told you that you have multiple sclerosis (MS). This disease affects the brain and spinal ...

  14. Small for gestational age (SGA)

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002302.htm Small for gestational age (SGA) To use the sharing features on this page, please enable JavaScript. Small for gestational age means that a fetus or ...

  15. Aging changes in body shape

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003998.htm Aging changes in body shape To use the sharing ... and both sexes. Height loss is related to aging changes in the bones, muscles, and joints. People ...

  16. Sleep disorders in the elderly

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000064.htm Sleep disorders in older adults To use the sharing features on this page, please enable JavaScript. Sleep disorders in older adults involve any disrupted sleep ...

  17. Dementia - behavior and sleep problems

    MedlinePlus

    ... gov/ency/patientinstructions/000029.htm Dementia - behavior and sleep problems To use the sharing features on this ... sleep and stay asleep Tips for Behavior and Sleep Problems Having a daily routine may help. Calmly ...

  18. Open heart surgery

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/002950.htm Open heart surgery To use the sharing features on this ... large arteries connected to the heart. The term "open heart surgery" means that you are connected to a ...

  19. Intraventricular hemorrhage of the newborn

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/007301.htm Intraventricular hemorrhage of the newborn To use the sharing features on this page, please enable JavaScript. Intraventricular hemorrhage (IVH) of the newborn is bleeding into the ...

  20. Your cancer survivorship care plan

    MedlinePlus

    ... ency/patientinstructions/000822.htm Your cancer survivorship care plan To use the sharing features on this page, ... get one. What Is a Cancer Survivorship Care Plan? A cancer survivorship care plan is a document ...

  1. Butter, margarine, and cooking oils

    MedlinePlus

    ... gov/ency/patientinstructions/000095.htm Butter, margarine, and cooking oils To use the sharing features on this ... these oils when possible. What to Use When Cooking When you cook, solid margarine or butter is ...

  2. Swan-Ganz - right heart catheterization

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003870.htm Swan-Ganz - right heart catheterization To use the sharing features on this page, please enable JavaScript. Swan-Ganz catheterization is the passing of a thin ...

  3. Neuropathy secondary to drugs

    MedlinePlus

    ... drugs URL of this page: //medlineplus.gov/ency/article/000700.htm Neuropathy secondary to drugs To use the sharing features on this page, please enable JavaScript. Neuropathy secondary to drugs is a loss of ...

  4. Bence-Jones protein - quantitative

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003597.htm Quantitative Bence-Jones protein test To use the sharing ... Todd Gersten, MD, Hematology/Oncology, Florida Cancer Specialists & Research Institute, Wellington, FL. Review provided by VeriMed Healthcare ...

  5. Bile acid sequestrants for cholesterol

    MedlinePlus

    ... ency/patientinstructions/000787.htm Bile acid sequestrants for cholesterol To use the sharing features on this page, ... are medicines that help lower your LDL (bad) cholesterol . Too much cholesterol in your blood can stick ...

  6. Diabetes - when you are sick

    MedlinePlus

    ... gov/ency/patientinstructions/000079.htm Diabetes - when you are sick To use the sharing features on this ... call or see your provider. Eating When you are Sick When you have an upset stomach, try ...

  7. Minor burn - first aid - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100213.htm Minor burn - first aid - series—Procedure, part 1 To use ... out of 2 Overview To treat a minor burn, run cool water over the area of the ...

  8. Sexual Violence

    MedlinePlus

    ... References 1. Black MC, Basile KC, Breiding MJ, Smith SG, Walters ML, Merrick MT, Chen J, Stevens ... cdc.gov/mmwr/preview/mmwrhtml/ss5806a1.htm 6. Smith SG. Breiding MJ. Chronic disease and health behaviours ...

  9. Poisoning first aid

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/007579.htm Poisoning first aid To use the sharing features on this page, ... burns Stupor Unconsciousness (coma) Unusual breath odor Weakness First Aid Seek immediate medical help. For poisoning by swallowing ...

  10. First aid kit

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001958.htm First aid kit To use the sharing features on this ... ahead, you can create a well-stocked home first aid kit. Keep all of your supplies in one ...

  11. Ethylene glycol blood test

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/003564.htm Ethylene glycol blood test To use the sharing features ... enable JavaScript. This test measures the level of ethylene glycol in the blood. Ethylene glycol is a ...

  12. Skilled nursing or rehabilitation facilities

    MedlinePlus

    ... ency/patientinstructions/000435.htm Skilled nursing or rehabilitation facilities To use the sharing features on this page, ... to go to a Skilled Nursing or Rehabilitation Facility? Your health care provider may determine that you ...

  13. Preventing hepatitis B or C

    MedlinePlus

    ... ency/patientinstructions/000401.htm Preventing hepatitis B or C To use the sharing features on this page, please enable JavaScript. Hepatitis B and hepatitis C infections cause irritation and swelling of the liver. ...

  14. Measuring and analyzing thermal deformations of the primary reflector of the Tianma radio telescope

    NASA Astrophysics Data System (ADS)

    Dong, Jian; Fu, Li; Liu, Qinghui; Shen, Zhiqiang

    2018-06-01

    The primary reflector of the Tianma Radio Telescope (TMRT) distorts due to the varying thermal conditions, which dramatically reduces the aperture efficiency of Q-band observations. To evaluate and overcome the thermal effects, a thermal deformations measurement system has been established based on the extended Out-of-Focus holography (e-OOF). The thermal deformations can be measured in approximately 20 min with an illumination-weighted surface root mean square (RMS) accuracy of approximately 50 μm. We have measured the thermal deformations when the backup and front structure were heated by the sun respectively, and used the active surface system to correct the thermal deformations immediately to confirm the measurements. The thermal deformations when the backup structure is heated are larger than those when the front structure is heated. The values of half power beam width (HPBW) are related to the illumination-weighted surface RMS, and can be used to check the thermal deformations. When the backup structure is heated, the aperture efficiencies can remain above 90% of the maximum efficiency at 40 GHz for approximately two hours after one adjustment. While the front structure is heated, the aperture efficiencies can remain above 90% of the maximum efficiency at 40 GHz, and above 95% after one adjustment in approximately three hours.

  15. Influence of PEG coating on optical and thermal response of gold nanoshperes and nanorods

    NASA Astrophysics Data System (ADS)

    Chen, Qin; Ren, Yatao; Qi, Hong; Ruan, Liming

    2018-06-01

    PEGylation is widely applied as a surface modification method for nanoparticles in biomedical applications to improve their biological properties, including biocompatibility and immunogenicity. In most of its biomedical applications, nanoparticles are served as optical or thermal contrast agents. Therefore, the impact of poly (ethylene glycol) (PEG) coating thickness on the optical and thermal properties of nanoparticles needs to be further investigated. In the present work, we studied two kinds of commonly used nanoparticles, including nanosphere and nanorod. The temperature and electric fields are obtained for nanoparticles with different PEG coating thicknesses. It is found that the change of PEG coating thickness on gold nanospheres only has impact on the absolute value of maximum absorption and scattering efficiencies, which barely influences the LSPR wavelength λmax and other optical and thermal characteristics. In contrast, for nanorod, the maximum efficiencies are barely influenced by the variation of PEG coating thickness. On the other hand, the localized surface plasmon resonance wavelength has an evident red shift with the increasing of PEG coating thickness. The maximum absorption efficiency is a way to evaluate the energy dissipation rate, which decides the scale of the heat source induced by nanoparticles. These findings are crucial for the accurate prediction of optical and thermal properties of nanoparticles in biomedical application. The present work also presents a possible way to manipulate the optical and thermal behaviors of nanoparticles in the application of biomedicine without changing the morphology of nanoparticles.

  16. Soil water content and evaporation determined by thermal parameters obtained from ground-based and remote measurements

    NASA Technical Reports Server (NTRS)

    Reginato, R. J.; Idso, S. B.; Jackson, R. D.; Vedder, J. F.; Blanchard, M. B.; Goettelman, R.

    1976-01-01

    Soil water contents from both smooth and rough bare soil were estimated from remotely sensed surface soil and air temperatures. An inverse relationship between two thermal parameters and gravimetric soil water content was found for Avondale loam when its water content was between air-dry and field capacity. These parameters, daily maximum minus minimum surface soil temperature and daily maximum soil minus air temperature, appear to describe the relationship reasonably well. These two parameters also describe relative soil water evaporation (actual/potential). Surface soil temperatures showed good agreement among three measurement techniques: in situ thermocouples, a ground-based infrared radiation thermometer, and the thermal infrared band of an airborne multispectral scanner.

  17. Process for the fabrication of aluminum metallized pyrolytic graphite sputtering targets

    DOEpatents

    Makowiecki, D.M.; Ramsey, P.B.; Juntz, R.S.

    1995-07-04

    An improved method is disclosed for fabricating pyrolytic graphite sputtering targets with superior heat transfer ability, longer life, and maximum energy transmission. Anisotropic pyrolytic graphite is contoured and/or segmented to match the erosion profile of the sputter target and then oriented such that the graphite`s high thermal conductivity planes are in maximum contact with a thermally conductive metal backing. The graphite contact surface is metallized, using high rate physical vapor deposition (HRPVD), with an aluminum coating and the thermally conductive metal backing is joined to the metallized graphite target by one of four low-temperature bonding methods; liquid-metal casting, powder metallurgy compaction, eutectic brazing, and laser welding. 11 figs.

  18. Characteristics and model of sludge adhesion during thermal drying.

    PubMed

    Li, Huan; Zou, Shuxin; Li, Yangyang; Jin, Yiying

    2013-01-01

    During sludge thermal drying, the sludge adhered on the heated surface of drying equipments may affect drying efficiency. Sludge thermal drying experiments were conducted to investigate the effect of different drying conditions on sludge adhesion. The mass of sludge adhered on the heated surface (dryer wall) reached the maximum when sludge water content was about 60%. A high drying temperature would result in more sludge adhered on the heated surface in the temperature range of 80-160 degrees C. The convection heating and rougher surface would also lead to more sludge adhered on the heated surface. The relation between the maximum mass of adherent sludge and drying temperatures could be described by an exponential equation.

  19. An argyrodite-type Ag9GaSe6 liquid-like material with ultralow thermal conductivity and high thermoelectric performance.

    PubMed

    Jiang, Binbin; Qiu, Pengfei; Chen, Hongyi; Zhang, Qihao; Zhao, Kunpeng; Ren, Dudi; Shi, Xun; Chen, Lidong

    2017-10-24

    We report a ternary argyrodite-type Ag 9 GaSe 6 compound as a promising thermoelectric material in a moderate temperature range. Due to high carrier mobility and ultralow lattice thermal conductivity, a maximum ZT of 1.1 was obtained with stoichiometric Ag 9 GaSe 6 at 800 K. Via introducing slight Se-deficiency to optimize the carrier concentration, the maximum ZT is further enhanced to 1.3.

  20. A review of passive thermal management of LED module

    NASA Astrophysics Data System (ADS)

    Huaiyu, Ye; Koh, Sau; van Zeijl, Henk; Gielen, A. W. J.; Guoqi, Zhang

    2011-01-01

    Recently, the high-brightness LEDs have begun to be designed for illumination application. The increased electrical currents used to drive LEDs lead to thermal issues. Thermal management for LED module is a key design parameter as high operation temperature directly affects their maximum light output, quality, reliability and life time. In this review, only passive thermal solutions used on LED module will be studied. Moreover, new thermal interface materials and passive thermal solutions applied on electronic equipments are discussed which have high potential to enhance the thermal performance of LED Module.

  1. 40 CFR 1037.810 - Incorporation by reference.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... must publish a notice of the change in the Federal Register and the material must be available to the.../climate/gem.htm. (2) [Reserved] (d) Society of Automotive Engineers, 400 Commonwealth Dr., Warrendale, PA...

  2. Major depression with psychotic features

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000933.htm Major depression with psychotic features To use the sharing features on this page, please enable JavaScript. Major depression with psychotic features is a mental disorder in ...

  3. Parathyroid hormone-related protein blood test

    MedlinePlus

    ... gov/ency/article/003691.htm Parathyroid hormone-related protein blood test To use the sharing features on ... page, please enable JavaScript. The parathyroid hormone-related protein (PTH-RP) test measures the level of a ...

  4. Glucose-6-phosphate dehydrogenase

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/003671.htm Glucose-6-phosphate dehydrogenase test To use the sharing features on this page, please enable JavaScript. Glucose-6-phosphate dehydrogenase (G6PD) is a protein that helps ...

  5. Skin and hair changes during pregnancy

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000611.htm Skin and hair changes during pregnancy To use the sharing features ... women are left with freckles. Your Nails and Hair You may notice changes in the texture and ...

  6. Angioplasty and stent placement - carotid artery

    MedlinePlus

    ... medlineplus.gov/ency/article/002953.htm Angioplasty and stent placement - carotid artery To use the sharing features ... to remove plaque buildup ( endarterectomy ) Carotid angioplasty with stent placement Description Carotid angioplasty and stenting (CAS) is ...

  7. Angioplasty and stent placement - peripheral arteries

    MedlinePlus

    ... medlineplus.gov/ency/article/007393.htm Angioplasty and stent placement - peripheral arteries To use the sharing features ... inside the arteries and block blood flow. A stent is a small, metal mesh tube that keeps ...

  8. Angioplasty and stent placement - peripheral arteries - discharge

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000234.htm Angioplasty and stent placement - peripheral arteries - discharge To use the sharing ... peripheral artery). You may have also had a stent placed. To perform the procedure: Your doctor inserted ...

  9. Angioplasty and stent placement - carotid artery - discharge

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000235.htm Angioplasty and stent placement - carotid artery - discharge To use the sharing ... the hospital. You may have also had a stent (a tiny wire mesh tube) placed in the ...

  10. Aging changes in the bones - muscles - joints

    MedlinePlus

    ... ency/article/004015.htm Aging changes in the bones - muscles - joints To use the sharing features on ... to the body. Joints are the areas where bones come together. They allow the skeleton to be ...

  11. Palliative care - fluid, food, and digestion

    MedlinePlus

    ... gov/ency/patientinstructions/000531.htm Palliative care - fluid, food, and digestion To use the sharing features on ... When Your Body Has Problems Handling Fluids and Food It is normal for a person who has ...

  12. When you feel like changing your medicine

    MedlinePlus

    ... 000616.htm When you feel like changing your medicine To use the sharing features on this page, ... well with your medicines. Common Reasons for Changing Medicine You may think about stopping or changing your ...

  13. Understanding health insurance plans

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000879.htm Understanding health insurance plans To use the sharing features on this ... plan for you and your family. Types of Health Insurance Plans Depending on how you get your health ...

  14. 5 CFR 1820.1 - General provisions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... records is available on the FOIA page of OSC's Web site (http://www.osc.gov/foia.htm). Information... by the public affairs officer, records published on the agency's Web site (http://www.osc.gov), or...

  15. Questions to ask your child's doctor

    MedlinePlus

    ... ency/patientinstructions/000922.htm Questions to ask your child's doctor about cancer To use the sharing features on this page, please enable JavaScript. Your child is having treatment for cancer. These treatments may ...

  16. Blood pressure monitors for home

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/007482.htm Blood pressure monitors for home To use the sharing features ... may ask you to keep track of your blood pressure at home. To do this, you will need ...

  17. Thyroid cancer - papillary carcinoma

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/000331.htm Thyroid cancer - papillary carcinoma To use the sharing features on ... the lower neck. Causes About 80% of all thyroid cancers diagnosed in the United States are the papillary ...

  18. Heart-lung transplant - slideshow

    MedlinePlus

    ... page: //medlineplus.gov/ency/presentations/100147.htm Heart-lung transplant - series—Normal anatomy To use the sharing features ... Editorial team. Related MedlinePlus Health Topics Heart Transplantation Lung Transplantation A.D.A.M., Inc. is accredited by ...

  19. Aging changes in the male reproductive system

    MedlinePlus

    ... 004017.htm Aging changes in the male reproductive system To use the sharing features on this page, ... urac.org). URAC's accreditation program is an independent audit to verify that A.D.A.M. follows ...

  20. Vaginal itching and discharge - Adult and adolescent

    MedlinePlus

    ... 003158.htm Vaginal itching and discharge - adult and adolescent To use the sharing features on this page, ... fabric softeners, feminine sprays, ointments, creams, douches, and contraceptive foams or jellies or creams. This may irritate ...

  1. Understanding Medical Words Tutorial: Download Instructions

    MedlinePlus

    ... are compressed into a zip format, not all software packages will follow the step-by-step directions ... http://www.winzip.com/aboutzip.htm) or similar software and be sure to extract ALL the files ...

  2. 76 FR 49774 - Cellular, Tissue and Gene Therapies Advisory Committee; Notice of Meeting

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-11

    ... immunodeficiency diseases, beta thalassemia, Hurler syndrome, Krabbe disease, and X- linked adrenoleukodystrophy... available at http://www.fda.gov/AdvisoryCommittees/Calendar/default.htm . Scroll down to the appropriate...

  3. Lasik eye surgery - slideshow

    MedlinePlus

    ... this page: //medlineplus.gov/ency/presentations/100206.htm Lasik eye surgery - series—Normal anatomy To use the ... A.M. Editorial team. Related MedlinePlus Health Topics Laser Eye Surgery A.D.A.M., Inc. is accredited by ...

  4. Steps to take before you get pregnant

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000513.htm Steps to take before you get pregnant To use ... start making changes before you get pregnant. These steps will help you prepare yourself and your body ...

  5. Rape prevention

    MedlinePlus

    Date rape - prevention; Sexual assault - prevention ... Centers for Disease Control and Prevention website. Sexual assault and abuse and STDs. In: 2015 sexually transmitted diseases treatment guidelines 2015. www.cdc.gov/std/tg2015/sexual-assault.htm . Updated June 4, ...

  6. Heart disease and intimacy

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000540.htm Heart disease and intimacy To use the sharing features on ... 22267844 . Morrow DA, de Lemos JA. Stable ischemic heart disease. In: Zipes DP, Libby P, Bonow RO, Mann ...

  7. Thrombolytic drugs for heart attack

    MedlinePlus

    ... gov/ency/article/007488.htm Thrombolytic drugs for heart attack To use the sharing features on this page, ... supply blood and oxygen to the heart. A heart attack can occur if a blood clot stops the ...

  8. Pericarditis - after heart attack

    MedlinePlus

    ... medlineplus.gov/ency/article/000166.htm Pericarditis - after heart attack To use the sharing features on this page, ... occur in the days or weeks following a heart attack . Causes Two types of pericarditis can occur after ...

  9. Understanding your health care costs

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000878.htm Understanding your health care costs To use the sharing features on this ... This is the payment you make for certain health care provider visits and prescriptions. It is a set ...

  10. Barrier methods of birth control - slideshow

    MedlinePlus

    ... ency/presentations/100107.htm Barrier methods of birth control - series—Female normal anatomy To use the sharing ... M. Editorial team. Related MedlinePlus Health Topics Birth Control A.D.A.M., Inc. is accredited by ...

  11. Birth control and family planning

    MedlinePlus

    ... page: //medlineplus.gov/ency/article/001946.htm Birth control and family planning To use the sharing features ... please enable JavaScript. Your choice of a birth control method depends on a number of factors, including ...

  12. Drawing medicine out of a vial

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000530.htm Drawing medicine out of a vial To use the sharing ... a clean area. Wash your hands. Check Your Medicine Carefully check your medicine: Check the label. Make ...

  13. How to save money on medicines

    MedlinePlus

    ... patientinstructions/000863.htm How to save money on medicines To use the sharing features on this page, ... can help you pay for your medicines. Use Medicines Wisely Take all of your medicines as directed ...

  14. Taking medicine at home - create a routine

    MedlinePlus

    ... page: //medlineplus.gov/ency/patientinstructions/000613.htm Taking medicine at home - create a routine To use the ... teeth. Find Ways to Help You Remember Your Medicines You can: Set the alarm on your clock, ...

  15. Returning to sports after a back injury

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000518.htm Returning to sports after a back injury To use the sharing ... Back pain - returning to sports Which Type of Sport is Best? In deciding when and if to ...

  16. Nerve damage from diabetes - self-care

    MedlinePlus

    ... this page: //medlineplus.gov/ency/patientinstructions/000326.htm Nerve damage from diabetes - self-care To use the ... or at other unusual times. Treating and Preventing Nerve Damage from Diabetes Treating diabetic neuropathy can make ...

  17. 14 CFR § 1260.6 - Publication.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... § 1260.6 Publication. The official site for accessing the NASA Grant and Cooperative Agreement Handbook, including current Grant Notices, is on the internet at: http://ec.msfc.nasa.gov/hq/grcover.htm ...

  18. 24-hour urine copper test

    MedlinePlus

    ... medlineplus.gov/ency/article/003604.htm 24-hour urine copper test To use the sharing features on this page, please enable JavaScript. The 24-hour urine copper test measures the amount of copper in ...

  19. 5 CFR 1820.1 - General provisions.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... records is available on the FOIA page of OSC's Web site (http://www.osc.gov/foia.htm). Information... by the public affairs officer, records published on the agency's Web site (http://www.osc.gov), or...

  20. 5 CFR 1820.1 - General provisions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... records is available on the FOIA page of OSC's Web site (http://www.osc.gov/foia.htm). Information... by the public affairs officer, records published on the agency's Web site (http://www.osc.gov), or...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top