An epistemology of patient safety research: a framework for study design and interpretation. Part 1. Conceptualising and developing interventions.

PubMed

Brown, C; Hofer, T; Johal, A; Thomson, R; Nicholl, J; Franklin, B D; Lilford, R J

2008-06-01

This is the first of a four-part series of articles examining the epistemology of patient safety research. Parts 2 and 3 will describe different study designs and methods of measuring outcomes in the evaluation of patient safety interventions, before Part 4 suggests that "one size does not fit all". Part 1 sets the scene by defining patient safety research as a challenging form of service delivery and organisational research that has to deal (although not exclusively) with some very rare events. It then considers two inter-related ideas: a causal chain that can be used to identify where in an organisation's structure and/or processes an intervention may impact; and the need for preimplementation evaluation of proposed interventions. Finally, the paper outlines the authors' pragmatist ontological stance to patient safety research, which sets the philosophical basis for the remaining three articles.

VISUAL AND AUDIO PRESENTATION IN MACHINE PROGRAMED INSTRUCTION. FINAL REPORT.

ERIC Educational Resources Information Center

ALLEN, WILLIAM H.

THIS STUDY WAS PART OF A LARGER RESEARCH PROGRAM AIMED TOWARD DEVELOPMENT OF PARADIGMS OF MESSAGE DESIGN. OBJECTIVES OF THREE PARALLEL EXPERIMENTS WERE TO EVALUATE INTERACTIONS OF PRESENTATION MODE, PROGRAM TYPE, AND CONTENT AS THEY AFFECT LEARNER CHARACTERISTICS. EACH EXPERIMENT USED 18 TREATMENTS IN A FACTORIAL DESIGN WITH RANDOMLY SELECTED…

Lighting in Architectural Design.

ERIC Educational Resources Information Center

Phillips, Derek

The primary function of this book is to treat the topic of lighting design in such a manner as to bridge the gap between architects and illuminating engineers. The work is divided into three parts: Part I, Principles of Design, offers information and analysis of how natural and artificial lighting affects building design, how illumination levels…

LCA and design for environment (DFE) -- Application to the automotive industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bensahel, J.F.; Teulon, H.

End of life of large plastic parts is a major issue for the automotive industry, whereas metal parts are easily recycled. Ecobilan is carrying out a study on plastic bumpers, for the French car manufacturer Peugeot SA. This study aims at estimating the environmental impacts of three alternative treatments for plastic bumpers at the end of life of the car: (1 ) crushing and shredding with the whole automobile, screening of the metallic and mineral part, and incineration of the automobile shredder residue, (2) dismantling and separate incineration of bumpers, (3) dismantling and recycling of bumpers, as new plastic partsmore » for the automobile industry. Systems boundaries are defined so as to include into the systems only the steps which makes difference between the three options. The long term stake of the study is to include environmental data in the design of the car, along with technical and economic elements, that is to say to Design For Environment. The objective is to find economic, technical and environmental optimum for complex products, that makes sense on the whole life cycle of the product. Peugeot SA agrees to publish some results, which will be available by May 1995. These results will mix both environmental and economic analysis.« less

CENTRALIZED TREATMENT OF METAL FINISHING WASTES AT A CLEVELAND RESOURCE RECOVERY PARK: PART 1. DESIGN AND COSTS. PART 2. FINANCING. PART 3. SITE INVESTIGATION

EPA Science Inventory

The report, in three parts, describes the characteristics of the Cleveland (OH) area electroplating industry and an approach and design for a centralized facility to treat cyanide and heavy metal wastes generated by this industry. The facility is termed the Resource Recovery Park...

Turbomachinery design and tonal acoustics computations

NASA Technical Reports Server (NTRS)

Rangwalla, Akil A.

1995-01-01

The objective of this research was two-fold. The first objective was to complete the three-dimensional unsteady calculations of the flow through a new transonic turbine and study the effects of secondary flows due to the hub and casing, tip clearance vortices, and the inherent three-dimensional mixing of the flow. It should be noted that this turbine was and is still in the design phase and the results of the calculations have formed an integral part of the design process. The second objective of this proposal was to evaluate the capability of rotor-stator interaction codes to calculate tonal acoustics.

FRED: Exergame to Prevent Dependence and Functional Deterioration Associated with Ageing. A Pilot Three-Week Randomized Controlled Clinical Trial.

PubMed

Mugueta-Aguinaga, Iranzu; Garcia-Zapirain, Begonya

2017-11-23

Introduction: Frailty syndrome and advanced age may decrease the acceptance of illness and quality of life, and worsen patients' existing health conditions, as well as leading to an increase in health care expenses. Purpose: The purpose of this study is to reduce frailty risk via the use of a FRED game which has been expressly designed and put together for the study. Materials and methods: A total of 40 frail volunteers with a score of <10 points in the short physical performance battery (SPPB) took part in a feasibility study in order to validate the FRED game. Following randomisation, the study group (20 subjects) took part in nine sessions of 20 min each over a three-week period. The control group (19 subjects) continued to lead their daily lives in the course of which they had no physical activity scheduled; Results: After three weeks and having taken part in nine physical activity sessions with the FRED game, 60% of subjects from the study group (12/20) obtained a score of ≥10 points at the end of the study, i.e., less risk of evidencing frailty. This result proved to be statistically significant ( p < 0.001). The degree of compliance with and adherence to the game was confirmed by 100% attendance of the sessions. Discussion: Our findings support the hypothesis that FRED, an ad hoc designed exergame, significantly reduced the presence and severity of frailty in a sample of sedentary elders, thus potentially modifying their risk profile. Conclusions: The FRED game is a tool that shows a 99% certain improvement in the degree of frailty in frail elderly subjects. The effectiveness of the design of ad hoc games in a certain pathology or population group is therefore evidenced.

FRED: Exergame to Prevent Dependence and Functional Deterioration Associated with Ageing. A Pilot Three-Week Randomized Controlled Clinical Trial

PubMed Central

Garcia-Zapirain, Begonya

2017-01-01

Introduction: Frailty syndrome and advanced age may decrease the acceptance of illness and quality of life, and worsen patients’ existing health conditions, as well as leading to an increase in health care expenses. Purpose: The purpose of this study is to reduce frailty risk via the use of a FRED game which has been expressly designed and put together for the study. Materials and Methods: A total of 40 frail volunteers with a score of <10 points in the short physical performance battery (SPPB) took part in a feasibility study in order to validate the FRED game. Following randomisation, the study group (20 subjects) took part in nine sessions of 20 min each over a three-week period. The control group (19 subjects) continued to lead their daily lives in the course of which they had no physical activity scheduled; Results: After three weeks and having taken part in nine physical activity sessions with the FRED game, 60% of subjects from the study group (12/20) obtained a score of ≥10 points at the end of the study, i.e., less risk of evidencing frailty. This result proved to be statistically significant (p < 0.001). The degree of compliance with and adherence to the game was confirmed by 100% attendance of the sessions. Discussion: Our findings support the hypothesis that FRED, an ad hoc designed exergame, significantly reduced the presence and severity of frailty in a sample of sedentary elders, thus potentially modifying their risk profile. Conclusions: The FRED game is a tool that shows a 99% certain improvement in the degree of frailty in frail elderly subjects. The effectiveness of the design of ad hoc games in a certain pathology or population group is therefore evidenced. PMID:29168787

Design Standards for Children's Environments.

ERIC Educational Resources Information Center

Ruth, Linda Cain

This three-part book addresses the design or maintenance of spaces where children are the primary users, covering both commercial and residential designs and products. Part 1 provides anthropometric data of children from birth to age 18; offers dimensions for typical objects within the child's built environment; synthesizes the Consumer Product…

Applications to car bodies - Generalized layout design of three-dimensional shells

NASA Technical Reports Server (NTRS)

Fukushima, Junichi; Suzuki, Katsuyuki; Kikuchi, Noboru

1993-01-01

We shall describe applications of the homogenization method, formulated in Part 1, to design layout of car bodies represented by three-dimensional shell structures based on a multi-loading optimization.

The Composing Processes of Three College Freshmen: Focus on Revision.

ERIC Educational Resources Information Center

Peitzman, Faye

As part of a larger research study, three freshman writers were observed in order to determine when they rewrote compositions, when they rethought major concepts and designs, and when they reviewed stylistic options and made purposive as opposed to uninformed changes in their writing. Their tape recorded comments were guided by questions on (1)…

A Framework for Preliminary Design of Aircraft Structures Based on Process Information. Part 1

NASA Technical Reports Server (NTRS)

Rais-Rohani, Masoud

1998-01-01

This report discusses the general framework and development of a computational tool for preliminary design of aircraft structures based on process information. The described methodology is suitable for multidisciplinary design optimization (MDO) activities associated with integrated product and process development (IPPD). The framework consists of three parts: (1) product and process definitions; (2) engineering synthesis, and (3) optimization. The product and process definitions are part of input information provided by the design team. The backbone of the system is its ability to analyze a given structural design for performance as well as manufacturability and cost assessment. The system uses a database on material systems and manufacturing processes. Based on the identified set of design variables and an objective function, the system is capable of performing optimization subject to manufacturability, cost, and performance constraints. The accuracy of the manufacturability measures and cost models discussed here depend largely on the available data on specific methods of manufacture and assembly and associated labor requirements. As such, our focus in this research has been on the methodology itself and not so much on its accurate implementation in an industrial setting. A three-tier approach is presented for an IPPD-MDO based design of aircraft structures. The variable-complexity cost estimation methodology and an approach for integrating manufacturing cost assessment into design process are also discussed. This report is presented in two parts. In the first part, the design methodology is presented, and the computational design tool is described. In the second part, a prototype model of the preliminary design Tool for Aircraft Structures based on Process Information (TASPI) is described. Part two also contains an example problem that applies the methodology described here for evaluation of six different design concepts for a wing spar.

Subsystem design in aircraft power distribution systems using optimization

NASA Astrophysics Data System (ADS)

Chandrasekaran, Sriram

2000-10-01

The research reported in this dissertation focuses on the development of optimization tools for the design of subsystems in a modern aircraft power distribution system. The baseline power distribution system is built around a 270V DC bus. One of the distinguishing features of this power distribution system is the presence of regenerative power from the electrically driven flight control actuators and structurally integrated smart actuators back to the DC bus. The key electrical components of the power distribution system are bidirectional switching power converters, which convert, control and condition electrical power between the sources and the loads. The dissertation is divided into three parts. Part I deals with the formulation of an optimization problem for a sample system consisting of a regulated DC-DC buck converter preceded by an input filter. The individual subsystems are optimized first followed by the integrated optimization of the sample system. It is shown that the integrated optimization provides better results than that obtained by integrating the individually optimized systems. Part II presents a detailed study of piezoelectric actuators. This study includes modeling, optimization of the drive amplifier and the development of a current control law for piezoelectric actuators coupled to a simple mechanical structure. Linear and nonlinear methods to study subsystem interaction and stability are studied in Part III. A multivariable impedance ratio criterion applicable to three phase systems is proposed. Bifurcation methods are used to obtain global stability characteristics of interconnected systems. The application of a nonlinear design methodology, widely used in power systems, to incrementally improve the robustness of a system to Hopf bifurcation instability is discussed.

Monthly progress report

NASA Technical Reports Server (NTRS)

Moorhead, Robert J., II; Smith, Wayne

1992-01-01

This report is the mid-year report intended for the design concepts for the communication network for the Advanced Solid Rocket Motor (ASRM) facility being built at Yellow Creek near Iuka, MS. The overall network is to include heterogeneous computers, to use various protocols, and to have different bandwidths. Performance consideration must be given to the potential network applications in the network environment. The performance evaluation of X window applications was given the major emphasis in this report. A simulation study using Bones will be included later. This mid-year report has three parts: Part 1 is an investigation of X window traffic using TCP/IP over Ethernet networks; part 2 is a survey study of performance concepts of X window applications with Macintosh computers; and the last part is a tutorial on DECnet protocols. The results of this report should be useful in the design and operation of the ASRM communication network.

Cost Per Pound From Orbit

NASA Technical Reports Server (NTRS)

Merriam, M. L.

2002-01-01

Traditional studies of Reusable Launch Vehicle (RLV) designs have focused on designs that are completely reusable except for the fuel. This may not be realistic with current technology . An alternate approach is to look at partially reusable launch vehicles. This raises the question of which parts should be reused and which parts should be expendable. One approach is to consider the cost/pound of returning these parts from orbit. With the shuttle, this cost is about three times the cost/pound of launching payload into orbit. A subtle corollary is that RLVs are much less practical for higher orbits, such as the one on which the International Space Station resides, than they are for low earth orbits.

Baseline antenna design for space exploration initiative

NASA Technical Reports Server (NTRS)

Chen, Y. L.; Nasir, M. A.; Lee, S. W.; Zaman, Afroz

1993-01-01

A key element of the future NASA Space Exploration Initiative (SEI) mission is the lunar and Mars telecommunication system. This system will provide voice, image, and data transmission to monitor unmanned missions to conduct experiments, and to provide radiometric data for navigation. In the later half of 1991, a study was conducted on antennas for the Mars Exploration Communication. Six antenna configurations were examined: three reflector and three phased array. The conclusion was that due to wide-angle scan requirement, and multiple simultaneous tracking beams, phased arrays are more suitable. For most part, this report studies phased array antenna designs for two different applications for Space Exploration Initiative. It also studies one design for a tri-reflector type antenna. These antennas will be based on a Mars orbiting satellite.

Three dimensional finite element methods: Their role in the design of DC accelerator systems

NASA Astrophysics Data System (ADS)

Podaru, Nicolae C.; Gottdang, A.; Mous, D. J. W.

2013-04-01

High Voltage Engineering has designed, built and tested a 2 MV dual irradiation system that will be applied for radiation damage studies and ion beam material modification. The system consists of two independent accelerators which support simultaneous proton and electron irradiation (energy range 100 keV - 2 MeV) of target sizes of up to 300 × 300 mm2. Three dimensional finite element methods were used in the design of various parts of the system. The electrostatic solver was used to quantify essential parameters of the solid-state power supply generating the DC high voltage. The magnetostatic solver and ray tracing were used to optimize the electron/ion beam transport. Close agreement between design and measurements of the accelerator characteristics as well as beam performance indicate the usefulness of three dimensional finite element methods during accelerator system design.

Automated selection of synthetic biology parts for genetic regulatory networks.

PubMed

Yaman, Fusun; Bhatia, Swapnil; Adler, Aaron; Densmore, Douglas; Beal, Jacob

2012-08-17

Raising the level of abstraction for synthetic biology design requires solving several challenging problems, including mapping abstract designs to DNA sequences. In this paper we present the first formalism and algorithms to address this problem. The key steps of this transformation are feature matching, signal matching, and part matching. Feature matching ensures that the mapping satisfies the regulatory relationships in the abstract design. Signal matching ensures that the expression levels of functional units are compatible. Finally, part matching finds a DNA part sequence that can implement the design. Our software tool MatchMaker implements these three steps.

Using Robotics and Game Design to Promote Pathways to STEM

ERIC Educational Resources Information Center

Leonard, Jacqueline; Buss, Alan; Unertl, Adrienne; Mitchell, Monica

2016-01-01

This research report presents the results of a STEM summer program on robotics and game design. The program was part of a three-year study funded by the National Science Foundation. Children in grades four through six participated in a two-week summer camp in 2015 to learn STEM by engaging in LEGO® EV3 robotics and computer-based games using…

Incorporating Beliefs, Values and Local Wisdom of Betawi Culture in a Character-Based Education through a Design-Based Research

ERIC Educational Resources Information Center

Suswandari

2017-01-01

This design-based research is part of three-year national projects examining the incorporation of local wisdom in a character-based education in primary school contexts. Specifically, the present study addresses two research questions: 1) what are local wisdoms of Betawi ethnic feasible to be incorporated in character based curriculum in primary…

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 1: System engineering

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1979-01-01

Volume 2, Part 1, of a seven volume report is presented. Part 1 encompasses Satellite Power Systems (SPS) systems engineering aspects and is divided into three sections. The first section presents descriptions of the various candidate concepts considered and conclusions and recommendations for a preferred concept. The second section presents a summary of results of the various trade studies and analysis conducted during the course of the study. The third section describes the Photovoltaic Satellite Based Satellite Power System (SPS) Point Design as it was defined through studies performed during the period January 1977 through March 1979.

Design verification and cold-flow modeling test report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-07-01

This report presents a compilation of the following three test reports prepared by TRW for Alaska Industrial Development and Export Authority (AIDEA) as part of the Healy Clean Coal Project, Phase 1 Design of the TRW Combustor and Auxiliary Systems, which is co-sponsored by the Department of Energy under the Clean Coal Technology 3 Program: (1) Design Verification Test Report, dated April 1993, (2) Combustor Cold Flow Model Report, dated August 28, 1992, (3) Coal Feed System Cold Flow Model Report, October 28, 1992. In this compilation, these three reports are included in one volume consisting of three parts, andmore » TRW proprietary information has been excluded.« less

Design of polymer motifs for nucleic acid recognition and assembly stabilization

NASA Astrophysics Data System (ADS)

Zhou, Zhun

This dissertation describes the synthesis and assembly of bio-functional polymers and the applications of these polymers to drug encapsulation, delivery, and multivalent biomimetic macromolecular recognition between synthetic polymer and nucleic acids. The main content is divided into three parts: (1) polyacidic domains as strongly stabilizing design elements for aqueous phase polyacrylate diblock assembly; (2) small molecule/polymer recognition triggered macromolecular assembly and drug encapsulation; (3) trizaine derivatized polymer as a novel class of "bifacial polymer nucleic acid" (bPoNA) and applications of bPoNA to nanoparticle loading of DNA/RNA, silencing delivery as well as control of aptamer function. Through the studies in part (1) and part (2), it was demonstrated that well-designed polymer motifs are not only able to enhance assemblies driven by non-specific hydrophobic effect, but are also able to direct assemblies based on specific recognitions. In part (3) of this dissertation, this concept was further extended by the design of polyacrylate polymers that are capable of discrete and robust hybridization with nucleic acids. This surprising finding demonstrated both fundamental and practical applications. Overall, these studies provided insights into the rational design elements for improving the bio-functions of synthetic polymers, and significantly expanded the scope of biological applications in which polymers synthesized via controlled radical polymerization may play a role.

Location of Shared Services, Part Three, Final Report for Phase I, Rural Shared Services.

ERIC Educational Resources Information Center

Northern Montana Coll., Havre.

Part Three of a four-part report, designed to identify, evaluate, and synthesize shared services research and development efforts conducted throughout the nation, identifies 215 sites in 48 states which exhibit potentially significant attempts to improve rural education through some method of sharing services. A brief resume of each of the…

Cyclic Voltammetry Experiment.

ERIC Educational Resources Information Center

Van Benschoten, James J.; And Others

1983-01-01

Describes a three-part experiment designed to introduce cyclic voltammetry to graduate/undergraduate students. Part 1 demonstrates formal reduction potential, redox electron transfer, diffusion coefficient, and electrochemical reversibility. Part 2 investigates electrochemical behavior of acetaminophen. Part 3 examines such experimental variables…

Team Conflict in ICT-Rich Environments: Roles of Technologies in Conflict Management

ERIC Educational Resources Information Center

Correia, Ana-Paula

2008-01-01

This study looks at how an information and communication technologies (ICT)-rich environment impacts team conflict and conflict management strategies. A case study research method was used. Three teams, part of a graduate class in instructional design, participated in the study. Data were collected through observations of team meetings, interviews…

Exploring Patient Activation in the Clinic: Measurement from Three Perspectives

ERIC Educational Resources Information Center

Ledford, Christy J. W.; Ledford, Christopher C.; Childress, Marc A.

2013-01-01

Objective. To further conceptualize and operationalize patient activation (PA), using measures from patient, physician, and researcher perspectives. Data Source/Study Setting. Multimethod observation in 2010 within a family medicine clinic. Study Design. Part of an intervention with 130 patients with type 2 diabetes, this observational study…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nabeel Riza

This final report contains the main results from a 3-year program to further investigate the merits of SiC-based hybrid sensor designs for extreme environment measurements in gas turbines. The study is divided in three parts. Part 1 studies the material properties of SiC such as temporal response, refractive index change with temperature, and material thermal response reversibility. Sensor data from a combustion rig-test using this SiC sensor technology is analyzed and a robust distributed sensor network design is proposed. Part 2 of the study focuses on introducing redundancy in the sensor signal processing to provide improved temperature measurement robustness. Inmore » this regard, two distinct measurement methods emerge. A first method uses laser wavelength sensitivity of the SiC refractive index behavior and a second method that engages the Black-Body (BB) radiation of the SiC package. Part 3 of the program investigates a new way to measure pressure via a distance measurement technique that applies to hot objects including corrosive fluids.« less

Survey of digital filtering

NASA Technical Reports Server (NTRS)

Nagle, H. T., Jr.

1972-01-01

A three part survey is made of the state-of-the-art in digital filtering. Part one presents background material including sampled data transformations and the discrete Fourier transform. Part two, digital filter theory, gives an in-depth coverage of filter categories, transfer function synthesis, quantization and other nonlinear errors, filter structures and computer aided design. Part three presents hardware mechanization techniques. Implementations by general purpose, mini-, and special-purpose computers are presented.

Manned space flight nuclear system safety. Volume 4: Space shuttle nuclear system transportation. Part 1: Space shuttle nuclear safety

NASA Technical Reports Server (NTRS)

1972-01-01

An analysis of the nuclear safety aspects (design and operational considerations) in the transport of nuclear payloads to and from earth orbit by the space shuttle is presented. Three representative nuclear payloads used in the study were: (1) the zirconium hydride reactor Brayton power module, (2) the large isotope Brayton power system and (3) small isotopic heat sources which can be a part of an upper stage or part of a logistics module. Reference data on the space shuttle and nuclear payloads are presented in an appendix. Safety oriented design and operational requirements were identified to integrate the nuclear payloads in the shuttle mission. Contingency situations were discussed and operations and design features were recommended to minimize the nuclear hazards. The study indicates the safety, design and operational advantages in the use of a nuclear payload transfer module. The transfer module can provide many of the safety related support functions (blast and fragmentation protection, environmental control, payload ejection) minimizing the direct impact on the shuttle.

An RC active filter design handbook

NASA Technical Reports Server (NTRS)

Deboo, G. J.

1977-01-01

The design of filters is described. Emphasis is placed on simplified procedures that can be used by the reader who has minimum knowledge about circuit design and little acquaintance with filter theory. The handbook has three main parts. The first part is a review of some information that is essential for work with filters. The second part includes design information for specific types of filter circuitry and describes simple procedures for obtaining the component values for a filter that will have a desired set of characteristics. Pertinent information relating to actual performance is given. The third part (appendix) is a review of certain topics in filter theory and is intended to provide some basic understanding of how filters are designed.

29 CFR Appendix to Part 1630 - Interpretive Guidance on Title I of the Americans With Disabilities Act

Code of Federal Regulations, 2010 CFR

2010-07-01

... Disabilities Act Background The ADA is a Federal antidiscrimination statute designed to remove barriers which... are designed to protect the public health from individuals who pose a direct threat, that cannot be... “disability” is divided into three parts. An individual must satisfy at least one of these parts in order to...

Problem solving strategies integrated into nursing process to promote clinical problem solving abilities of RN-BSN students.

PubMed

Wang, Jing-Jy; Lo, Chi-Hui Kao; Ku, Ya-Lie

2004-11-01

A set of problem solving strategies integrated into nursing process in nursing core courses (PSNP) was developed for students enrolled in a post-RN baccalaureate nursing program (RN-BSN) in a university in Taiwan. The purpose of this study, therefore, was to evaluate the effectiveness of PSNP on students' clinical problem solving abilities. The one-group post-test design with repeated measures was used. In total 114 nursing students with 47 full-time students and 67 part-time students participated in this study. The nursing core courses were undertaken separately in three semesters. After each semester's learning, students would start their clinical practice, and were asked to submit three written nursing process recordings during each clinic. Assignments from the three practices were named post-test I, II, and III sequentially, and provided the data for this study. The overall score of problem solving indicated that score on the post-test III was significantly better than that on post-test I and II, meaning both full-time and part-time students' clinical problem solving abilities improved at the last semester. In conclusion, problem-solving strategies integrated into nursing process designed for future RN-BSN students are recommendable.

Design, fabrication and test of block 4 design solar cell modules. Part 2: Residential module

NASA Technical Reports Server (NTRS)

Jester, T. L.

1982-01-01

Design, fabrication and test of the Block IV residential load module are reported. Design changes from the proposed module design through three iterations to the discontinuance of testing are outlined.

Rule-Based Design of Plant Expression Vectors Using GenoCAD.

PubMed

Coll, Anna; Wilson, Mandy L; Gruden, Kristina; Peccoud, Jean

2015-01-01

Plant synthetic biology requires software tools to assist on the design of complex multi-genic expression plasmids. Here a vector design strategy to express genes in plants is formalized and implemented as a grammar in GenoCAD, a Computer-Aided Design software for synthetic biology. It includes a library of plant biological parts organized in structural categories and a set of rules describing how to assemble these parts into large constructs. Rules developed here are organized and divided into three main subsections according to the aim of the final construct: protein localization studies, promoter analysis and protein-protein interaction experiments. The GenoCAD plant grammar guides the user through the design while allowing users to customize vectors according to their needs. Therefore the plant grammar implemented in GenoCAD will help plant biologists take advantage of methods from synthetic biology to design expression vectors supporting their research projects.

Development and evaluation of a study design typology for human research.

PubMed

Carini, Simona; Pollock, Brad H; Lehmann, Harold P; Bakken, Suzanne; Barbour, Edward M; Gabriel, Davera; Hagler, Herbert K; Harper, Caryn R; Mollah, Shamim A; Nahm, Meredith; Nguyen, Hien H; Scheuermann, Richard H; Sim, Ida

2009-11-14

A systematic classification of study designs would be useful for researchers, systematic reviewers, readers, and research administrators, among others. As part of the Human Studies Database Project, we developed the Study Design Typology to standardize the classification of study designs in human research. We then performed a multiple observer masked evaluation of active research protocols in four institutions according to a standardized protocol. Thirty-five protocols were classified by three reviewers each into one of nine high-level study designs for interventional and observational research (e.g., N-of-1, Parallel Group, Case Crossover). Rater classification agreement was moderately high for the 35 protocols (Fleiss' kappa = 0.442) and higher still for the 23 quantitative studies (Fleiss' kappa = 0.463). We conclude that our typology shows initial promise for reliably distinguishing study design types for quantitative human research.

24 CFR 598.1 - Applicability and scope.

Code of Federal Regulations, 2014 CFR

2014-04-01

... URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General... the second and third rounds of designations of urban Empowerment Zones, authorized under Subchapter U... requirement of, Round II in this part is also a reference to, or requirement of, Round III. (b) This part...

24 CFR 598.1 - Applicability and scope.

Code of Federal Regulations, 2013 CFR

2013-04-01

... URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General... the second and third rounds of designations of urban Empowerment Zones, authorized under Subchapter U... requirement of, Round II in this part is also a reference to, or requirement of, Round III. (b) This part...

24 CFR 598.1 - Applicability and scope.

Code of Federal Regulations, 2012 CFR

2012-04-01

... URBAN DEVELOPMENT COMMUNITY FACILITIES URBAN EMPOWERMENT ZONES: ROUND TWO AND THREE DESIGNATIONS General... the second and third rounds of designations of urban Empowerment Zones, authorized under Subchapter U... requirement of, Round II in this part is also a reference to, or requirement of, Round III. (b) This part...

Software For Drawing Design Details Concurrently

NASA Technical Reports Server (NTRS)

Crosby, Dewey C., III

1990-01-01

Software system containing five computer-aided-design programs enables more than one designer to work on same part or assembly at same time. Reduces time necessary to produce design by implementing concept of parallel or concurrent detailing, in which all detail drawings documenting three-dimensional model of part or assembly produced simultaneously, rather than sequentially. Keeps various detail drawings consistent with each other and with overall design by distributing changes in each detail to all other affected details.

Integrating Time, Place, and Play

ERIC Educational Resources Information Center

Gallavan, Nancy P.

2004-01-01

"Time, Place, and Play," is a short phrase, but is summarizes three very big concepts--history, geography, and culture--that are part of the elementary social studies curriculum. This article relates the story of how twenty-five elementary and middle school teachers, meeting over several weeks in a university class, designed a unit of study on the…

Early Career Teachers' Emotional Experiences and Development--A Norwegian Case Study

ERIC Educational Resources Information Center

Jakhelln, Rachel

2011-01-01

Emotional experiences that are an integral part of the process of becoming teachers have been insufficiently explored in the research literature. The early experiences of three new teachers in a Norwegian upper secondary school are analysed using a collective case-study design and a socio-cultural theoretical framework. Emotions arising in the…

Investigating the Effect of Discussion Prompts on Knowledge Construction

ERIC Educational Resources Information Center

Howell, Ginger S.

2014-01-01

The purpose of this study was to examine the effect of Andrews' (1980) three structured divergent prompt designs (Playground prompt, Brainstorm prompt, and Focal prompt) on knowledge construction. Sixty-five online graduate participants at a university in a South Atlantic state were a part of the study. Students' posts were analyzed using the…

42 CFR Appendix D to Part 5 - Criteria for Designation of Areas Having Shortages of Vision Care Professional(s)

Code of Federal Regulations, 2010 CFR

2010-10-01

... of Vision Care Professional(s) D Appendix D to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT... Pt. 5, App. D Appendix D to Part 5—Criteria for Designation of Areas Having Shortages of Vision Care... of vision care professional(s) if the following three criteria are met: 1. The area is a rational...

42 CFR Appendix D to Part 5 - Criteria for Designation of Areas Having Shortages of Vision Care Professional(s)

Code of Federal Regulations, 2011 CFR

2011-10-01

... of Vision Care Professional(s) D Appendix D to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT... Pt. 5, App. D Appendix D to Part 5—Criteria for Designation of Areas Having Shortages of Vision Care... of vision care professional(s) if the following three criteria are met: 1. The area is a rational...

Professional Development Planning and Design. Issues in Science Education.

ERIC Educational Resources Information Center

Rhoton, Jack; Bowers, Patricia

This book focuses on the professional development of teachers and discusses issues related to the planning and design of professional development programs. The content of the book is divided into three parts. Part 1, Standards-Based Reform and Professional Development includes: (1) "National Science Education Standards as a Catalyst for…

Teacher's Experience from Collaborative Design: Reported Impact on Professional Development

ERIC Educational Resources Information Center

Svendsen, Bodil

2017-01-01

This article is based on a research and development project conducted in one upper secondary school in Norway. The participating teachers have been part of a three year longitudinal study, and the findings in the present study are from their third and final year of a professional development study. The aim of this study was to find out how…

Practical research on the teaching of Optical Design

NASA Astrophysics Data System (ADS)

Fan, Changjiang; Ren, Zhijun; Ying, Chaofu; Peng, Baojin

2017-08-01

Optical design, together with applied optics, forms a complete system from basic theory to application theory, and it plays a very important role in professional education. In order to improve senior undergraduates' understanding of optical design, this course is divided into three parts: theoretical knowledge, software design and product processing. Through learning theoretical knowledge, students can master the aberration theory and the design principles of typical optical system. By using ZEMAX(an imaging design software), TRACEPRO(a lighting optical design software), SOLIDWORKS or PROE( mechanical design software), student can establish a complete model of optical system. Student can use carving machine located in lab or cooperative units to process the model. Through the above three parts, student can learn necessary practical knowledge and get improved in their learning and analysis abilities, thus they can also get enough practice to prompt their creative abilities, then they could gradually change from scientific theory learners to an Optics Engineers.

Making sense from space-time data in laboratory experiments on space plasma processes

NASA Technical Reports Server (NTRS)

Gekelman, Walter; Bamber, James; Leneman, David; Vincena, Steve; Maggs, James; Rosenberg, Steve

1995-01-01

A number of visualization techniques are discussed in a laboratory experiment designed to study phenomena that occur in space. Visualization tools are used to design the apparatus, collect data, and make one-, two-, and three-dimensional plots of the results. These tools are an indispensable part of the experiment because the data sets are hundreds of megabytes in size and rapid turnaround is required.

Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings

PubMed Central

Ali, Murat; Al-Hajjar, Mazen; Partridge, Susan; Williams, Sophie; Fisher, John; Jennings, Louise M

2016-01-01

Hip joint simulators are used extensively for preclinical testing of hip replacements. The variation in simulator design and test conditions used worldwide can affect the tribological performance of polyethylene. The aim of this study was to assess the effects of simulator mechanics and design on the wear and creep of ultra-high-molecular-weight polyethylene. In the first part of this study, an electromechanical simulator and pneumatic simulator were used to compare the wear and creep of metal-on-polyethylene components under the same standard gait conditions. In the second part of the study, the same electromechanical hip joint simulator was used to investigate the influence of kinematics on wear. Higher wear rates and penetration depths were observed from the electromechanical simulator compared with the pneumatic simulator. When adduction/abduction was introduced to the gait cycle, there was no significant difference in wear with that obtained under the gait cycle condition without adduction/abduction. This study confirmed the influence of hip simulator design and loading conditions on the wear of polyethylene, and therefore direct comparisons of absolute wear rates between different hip joint simulators should be avoided. This study also confirmed that the resulting wear path was the governing factor in obtaining clinically relevant wear rates, and this can be achieved with either two axes or three axes of rotations. However, three axes of rotation (with the inclusion of adduction/abduction) more closely replicate clinical conditions and should therefore be the design approach for newly developed hip joint simulators used for preclinical testing. PMID:27160559

Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings.

PubMed

Ali, Murat; Al-Hajjar, Mazen; Partridge, Susan; Williams, Sophie; Fisher, John; Jennings, Louise M

2016-05-01

Hip joint simulators are used extensively for preclinical testing of hip replacements. The variation in simulator design and test conditions used worldwide can affect the tribological performance of polyethylene. The aim of this study was to assess the effects of simulator mechanics and design on the wear and creep of ultra-high-molecular-weight polyethylene. In the first part of this study, an electromechanical simulator and pneumatic simulator were used to compare the wear and creep of metal-on-polyethylene components under the same standard gait conditions. In the second part of the study, the same electromechanical hip joint simulator was used to investigate the influence of kinematics on wear. Higher wear rates and penetration depths were observed from the electromechanical simulator compared with the pneumatic simulator. When adduction/abduction was introduced to the gait cycle, there was no significant difference in wear with that obtained under the gait cycle condition without adduction/abduction. This study confirmed the influence of hip simulator design and loading conditions on the wear of polyethylene, and therefore direct comparisons of absolute wear rates between different hip joint simulators should be avoided. This study also confirmed that the resulting wear path was the governing factor in obtaining clinically relevant wear rates, and this can be achieved with either two axes or three axes of rotations. However, three axes of rotation (with the inclusion of adduction/abduction) more closely replicate clinical conditions and should therefore be the design approach for newly developed hip joint simulators used for preclinical testing. © IMechE 2016.

Response of white-footed mice (Peromyscus leucopus) to fire and fire surrogate fuel reduction treatments in a southern Appalachian hardwood forest

Treesearch

Cathryn H. Greenberg; David L. Otis; Thomas A. Waldrop

2006-01-01

An experiment conducted as part of the multidisciplinary National Fire and Fire Surrogate Study was designed to determine effects of three fuel reduction techniques on small mammals and habitat structure in the southern Appalachian mountains. Four experimental units, each >14-ha were contained within each of three replicate blocks at the Green River Game Land,...

Design of a comprehensive biochemistry and molecular biology experiment: phase variation caused by recombinational regulation of bacterial gene expression.

PubMed

Sheng, Xiumei; Xu, Shungao; Lu, Renyun; Isaac, Dadzie; Zhang, Xueyi; Zhang, Haifang; Wang, Huifang; Qiao, Zheng; Huang, Xinxiang

2014-01-01

Scientific experiments are indispensable parts of Biochemistry and Molecular Biology. In this study, a comprehensive Biochemistry and Molecular Biology experiment about Salmonella enterica serovar Typhi Flagellar phase variation has been designed. It consisted of three parts, namely, inducement of bacterial Flagellar phase variation, antibody agglutination test, and PCR analysis. Phase variation was observed by baterial motility assay and identified by antibody agglutination test and PCR analysis. This comprehensive experiment can be performed to help students improve their ability to use the knowledge acquired in Biochemistry and Molecular Biology. Copyright © 2014 by The International Union of Biochemistry and Molecular Biology.

Balancing Flexible Constraints and Measurement Precision in Computerized Adaptive Testing

ERIC Educational Resources Information Center

Moyer, Eric L.; Galindo, Jennifer L.; Dodd, Barbara G.

2012-01-01

Managing test specifications--both multiple nonstatistical constraints and flexibly defined constraints--has become an important part of designing item selection procedures for computerized adaptive tests (CATs) in achievement testing. This study compared the effectiveness of three procedures: constrained CAT, flexible modified constrained CAT,…

A Study of EL2 Pilots' Radio Communication in the General Aviation Environment

ERIC Educational Resources Information Center

Estival, Dominique; Molesworth, Brett

2009-01-01

This paper reports on the preliminary stages of a project designed to investigate communication problems in General Aviation and assess the utility of language technologies as a means of mitigation. The study presented in this paper is the first of a three-part study, in which we aim to investigate the extent to which the English language…

Andragogy and Workplace Relationships: A Mixed-Methods Study Exploring Employees' Perceptions of Their Relationships with Their Supervisors

ERIC Educational Resources Information Center

Klepper, Erin M.

2017-01-01

The purpose of this mixed-method study was to explore employees' perceptions of their relationships with their direct supervisor, and to determine why employees chose to remain at SSM Health. This study used a three-part research design comprised of quantitative Likert scale rating statements, Henschke's (2016) Modified Instructional Perspectives…

Skill Analysis as a Technique for Predicting Vocational Success of the Mentally Retarded.

ERIC Educational Resources Information Center

Human Resources Center, Albertson, NY.

This study was designed to develop a skill anaysis test battery which would aid in the prediction of achievement in two specific areas of training. A total of forty educable mentally retarded students in work study classes were selected for training. A three part rating scale specifically for this study was used as criterion meansure against the…

Questioning as a Teaching Tool. The Media Systems Series in Creative Teaching.

ERIC Educational Resources Information Center

Thompson, Carolyn

This two-part learning module was designed to help instructors in making effective use of questioning techniques in promoting the classroom involvement of non-traditional students. Part I identifies the characteristics and uses of three different types of questions: (1) convergent, eliciting questions, which are designed to verify student…

An Evaluation of the Preschool PATHS Curriculum on the Development of Preschool Children

ERIC Educational Resources Information Center

Hughes, Cerian; Cline, Tony

2015-01-01

This study evaluated the efficacy of preschool Promoting Alternative Thinking Strategies (PATHS), an early years curriculum designed to improve children's social and emotional competence, and reduce problem behaviour. Fifty-seven children aged three to four years took part in the study over one academic year. The control group (Group 1) received…

Nondestructive methods of integrating energy harvesting systems with structures

NASA Astrophysics Data System (ADS)

Inamdar, Sumedh; Zimowski, Krystian; Crawford, Richard; Wood, Kristin; Jensen, Dan

2012-04-01

Designing an attachment structure that is both novel and meets the system requirements can be a difficult task especially for inexperienced designers. This paper presents a design methodology for concept generation of a "parent/child" attachment system. The "child" is broadly defined as any device, part, or subsystem that will attach to any existing system, part, or device called the "parent." An inductive research process was used to study a variety of products, patents, and biological examples that exemplified the parent/child system. Common traits among these products were found and categorized as attachment principles in three different domains: mechanical, material, and field. The attachment principles within the mechanical domain and accompanying examples are the focus of this paper. As an example of the method, a case study of generating concepts for a bridge mounted wind energy harvester using the mechanical attachment principles derived from the methodology and TRIZ principles derived from Altshuller's matrix of contradictions is presented.

Case Study: Innovative Assessment and Curriculum Redesign

ERIC Educational Resources Information Center

Nieweg, Michael R.

2004-01-01

The Institute for Physiotherapy, part of the Hogeschool van Amsterdam in the Netherlands, engaged in a fundamental change in their curriculum. This change encompassed three fundamental elements: (1) a fully competency-based programme; (2) a learning environment designed to enable the development of these professional competencies; and (3) an…

Designing the Horizons of Your Small Business.

ERIC Educational Resources Information Center

Helgemo, Robert R.

This manual outlines the planning process for developing a feasibility study for a small business. The material is composed of three parts: the planning documents filled out for an imaginary campground; a business plan summarized from the planning documents; and blank planning documents with introductions and instructions. The documents can be…

Issues in Postsecondary Education. Financial Viability of Institutions.

ERIC Educational Resources Information Center

Jenny, Hans H.

One of three papers commissioned as part of the Postsecondary Education Core Design Project of the National Center for Education Statistics (NCES), one of this study's purposes was to identify and set priorities for postsecondary education decisionmakers in the area of financial viability in postsecondary institutions. Another purpose was to…

Towards a General-Purpose Belief Maintenance System.

DTIC Science & Technology

1987-04-01

reason using normal two or three-valued logic or using probabilistic values to represent partial belief. The design of the Belief Maintenance System is...as simply a generalization of Truth Maintenance Systems. whose possible reasoning tasks are a superset of those for a TMS. 2. DESIGN The design of...become support links in that they provide partial evidence in favor of a node. The basic design consists of three parts: (1) the conceptual control

Design of two-dimensional channels with prescribed velocity distributions along the channel walls

NASA Technical Reports Server (NTRS)

Stanitz, John D

1953-01-01

A general method of design is developed for two-dimensional unbranched channels with prescribed velocities as a function of arc length along the channel walls. The method is developed for both compressible and incompressible, irrotational, nonviscous flow and applies to the design of elbows, diffusers, nozzles, and so forth. In part I solutions are obtained by relaxation methods; in part II solutions are obtained by a Green's function. Five numerical examples are given in part I including three elbow designs with the same prescribed velocity as a function of arc length along the channel walls but with incompressible, linearized compressible, and compressible flow. One numerical example is presented in part II for an accelerating elbow with linearized compressible flow, and the time required for the solution by a Green's function in part II was considerably less than the time required for the same solution by relaxation methods in part I.

Design and development of a layer-based additive manufacturing process for the realization of metal parts of designed mesostructure

NASA Astrophysics Data System (ADS)

Williams, Christopher Bryant

Low-density cellular materials, metallic bodies with gaseous voids, are a unique class of materials that are characterized by their high strength, low mass, good energy absorption characteristics, and good thermal and acoustic insulation properties. In an effort to take advantage of this entire suite of positive mechanical traits, designers are tailoring the cellular mesostructure for multiple design objectives. Unfortunately, existing cellular material manufacturing technologies limit the design space as they are limited to certain part mesostructure, material type, and macrostructure. The opportunity that exists to improve the design of existing products, and the ability to reap the benefits of cellular materials in new applications is the driving force behind this research. As such, the primary research goal of this work is to design, embody, and analyze a manufacturing process that provides a designer the ability to specify the material type, material composition, void morphology, and mesostructure topology for any conceivable part geometry. The accomplishment of this goal is achieved in three phases of research: (1) Design---Following a systematic design process and a rigorous selection exercise, a layer-based additive manufacturing process is designed that is capable of meeting the unique requirements of fabricating cellular material geometry. Specifically, metal parts of designed mesostructure are fabricated via three-dimensional printing of metal oxide ceramic powder followed by post-processing in a reducing atmosphere. (2) Embodiment ---The primary research hypothesis is verified through the use of the designed manufacturing process chain to successfully realize metal parts of designed mesostructure. (3) Modeling & Evaluation ---The designed manufacturing process is modeled in this final research phase so as to increase understanding of experimental results and to establish a foundation for future analytical modeling research. In addition to an analysis of the physics of primitive creation and an investigation of failure modes during the layered fabrication of thin trusses, build time and cost models are presented in order to verify claims of the process's economic benefits. The main contribution of this research is the embodiment of a novel manner for realizing metal parts of designed mesostructure.

Graphical support for comprehending science texts: The contributions of diagram design and text directives

NASA Astrophysics Data System (ADS)

McTigue, Erin M.

The present study examined the combined effect of diagram design and text directives on the comprehension of explanatory science texts for middle school readers. Three types of diagram designs were compared. Each design contained the same graphical representation of a cycle but differed in the labels. The labels indicated either the (a) parts of the, cycle, (b) steps of the cycle, or (c) both the parts and steps. Additionally, there were two conditions of text, both with and without embedded directives. The directives guided the reader to the diagram to help readers integrate the two sources of information. Finally, each of the 189 sixth grade participants read two texts---a life-science text and a physical-science text. Results indicated that for the life-science text both the parts diagrams and the steps diagrams facilitated the readers' comprehension, but that the parts & steps diagram did not. Overall, the directives assisted readers in the life-science text, when they were viewing the complex diagrams: the steps diagram, and the parts & steps diagrams, but not the parts diagram. Directives also helped girls who were reading at the below- and on-grade level, but not the girls reading above-grade level. Neither the diagrams nor directives facilitated comprehension of the physical science text. There was a gender difference favoring boys on the physical science but no gender difference on the life-science text.

Influence of implant collar design on stress and strain distribution in the crestal compact bone: a three-dimensional finite element analysis.

PubMed

Shen, Wan-Ling; Chen, Chen-Sheng; Hsu, Ming-Lun

2010-01-01

To evaluate the influence of implant collar geometry on the distribution of stress and strain in the crestal compact bone contiguous to an implant collar for four types of bone under axial and oblique loads. Finite element models of threaded implants with three kinds of implant collar designs (divergent, straight, and convergent) with their corresponding suprastructures embedded in the posterior mandible were created with ANSYS software. Eight different test conditions incorporating four types of bone (orthotropic and effectively isotropic in part 1 and high and low densities in part 2) under separate 100-N axial and 35.6-degree oblique forces were created to investigate the stress and strain distributions in the crestal compact bone around the implant collars. In all eight conditions, the divergent collar demonstrated the lowest maximum von Mises and principal stresses and strains in the crestal compact bone contiguous to the implant collar, followed by the straight and convergent collars. The oblique load induced higher peak values than the axial load. The orthotropic design amplified and increased the pathologic microstrains and tensile stresses in the crestal compact bone compared to the effectively isotropic design, especially in models with a convergent collar design. In part 2 of the study, the maximum von Mises stresses and strains increased with a decrease in the cancellous bone density. Under oblique loading, the convergent and straight collars showed pathologic microstrain values as well as excessive ultimate tensile stresses in the orthotropic bone model with low-density cancellous bone. Within the limitations, it was concluded that stress and strain distributions in the adjacent compact bone are influenced by the implant collar design. The divergent implant collar design was associated with the lowest stress and strain concentrations in the crestal compact bone.

Optimal Experiment Design for Thermal Characterization of Functionally Graded Materials

NASA Technical Reports Server (NTRS)

Cole, Kevin D.

2003-01-01

The purpose of the project was to investigate methods to accurately verify that designed , materials meet thermal specifications. The project involved heat transfer calculations and optimization studies, and no laboratory experiments were performed. One part of the research involved study of materials in which conduction heat transfer predominates. Results include techniques to choose among several experimental designs, and protocols for determining the optimum experimental conditions for determination of thermal properties. Metal foam materials were also studied in which both conduction and radiation heat transfer are present. Results of this work include procedures to optimize the design of experiments to accurately measure both conductive and radiative thermal properties. Detailed results in the form of three journal papers have been appended to this report.

A Grounded Theory Approach to Understanding Ethical Leadership with School Leaders in Southern Nigeria: A Perspective of Three Primary Schools

ERIC Educational Resources Information Center

Egbufor, Dorothy Chukwudumebi

2017-01-01

The chief aim of this study was to develop a grounded theory of ethical leadership with school leaders in Southern Nigeria, utilizing a qualitative constructivist paradigm and multiple case study design. There is growing interest in public service of ethics (Barberis, 2001). The study of ethics has been a part of the [school] leadership erudition…

Single Grain Boundary Modeling and Design of Microcrystalline Si Solar Cells.

PubMed

Lin, Chu-Hsuan; Hsu, Wen-Tzu; Tai, Cheng-Hung

2013-01-21

For photovoltaic applications, microcrystalline silicon has a lot of advantages, such as the ability to absorb the near-infrared part of the solar spectrum. However, there are many dangling bonds at the grain boundary in microcrystalline Si. These dangling bonds would lead to the recombination of photo-generated carriers and decrease the conversion efficiency. Therefore, we included the grain boundary in the numerical study in order to simulate a microcrystalline Si solar cell accurately, designing new three-terminal microcrystalline Si solar cells. The 3-μm-thick three-terminal cell achieved a conversion efficiency of 10.8%, while the efficiency of a typical two-terminal cell is 9.7%. The three-terminal structure increased the J SC but decreased the V OC , and such phenomena are discussed. High-efficiency and low-cost Si-based thin film solar cells can now be designed based on the information provided in this paper.

Single Grain Boundary Modeling and Design of Microcrystalline Si Solar Cells

PubMed Central

Lin, Chu-Hsuan; Hsu, Wen-Tzu; Tai, Cheng-Hung

2013-01-01

For photovoltaic applications, microcrystalline silicon has a lot of advantages, such as the ability to absorb the near-infrared part of the solar spectrum. However, there are many dangling bonds at the grain boundary in microcrystalline Si. These dangling bonds would lead to the recombination of photo-generated carriers and decrease the conversion efficiency. Therefore, we included the grain boundary in the numerical study in order to simulate a microcrystalline Si solar cell accurately, designing new three-terminal microcrystalline Si solar cells. The 3-μm-thick three-terminal cell achieved a conversion efficiency of 10.8%, while the efficiency of a typical two-terminal cell is 9.7%. The three-terminal structure increased the JSC but decreased the VOC, and such phenomena are discussed. High-efficiency and low-cost Si-based thin film solar cells can now be designed based on the information provided in this paper. PMID:28809309

Recent Advances in Multidisciplinary Analysis and Optimization, part 3

NASA Technical Reports Server (NTRS)

Barthelemy, Jean-Francois M. (Editor)

1989-01-01

This three-part document contains a collection of technical papers presented at the Second NASA/Air Force Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, held September 28-30, 1988 in Hampton, Virginia. The topics covered include: aircraft design, aeroelastic tailoring, control of aeroelastic structures, dynamics and control of flexible structures, structural design, design of large engineering systems, application of artificial intelligence, shape optimization, software development and implementation, and sensitivity analysis.

Recent Advances in Multidisciplinary Analysis and Optimization, part 2

NASA Technical Reports Server (NTRS)

Barthelemy, Jean-Francois M. (Editor)

1989-01-01

This three-part document contains a collection of technical papers presented at the Second NASA/Air Force Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, held September 28-30, 1988 in Hampton, Virginia. The topics covered include: helicopter design, aeroelastic tailoring, control of aeroelastic structures, dynamics and control of flexible structures, structural design, design of large engineering systems, application of artificial intelligence, shape optimization, software development and implementation, and sensitivity analysis.

Recent Advances in Multidisciplinary Analysis and Optimization, part 1

NASA Technical Reports Server (NTRS)

Barthelemy, Jean-Francois M. (Editor)

1989-01-01

This three-part document contains a collection of technical papers presented at the Second NASA/Air Force Symposium on Recent Advances in Multidisciplinary Analysis and Optimization, held September 28-30, 1988 in Hampton, Virginia. The topics covered include: helicopter design, aeroelastic tailoring, control of aeroelastic structures, dynamics and control of flexible structures, structural design, design of large engineering systems, application of artificial intelligence, shape optimization, software development and implementation, and sensitivity analysis.

A Comparison of Students' Performance under Full-Time, Part-Time, and Online Conditions in an Undergraduate Nursing Microbiology Course

ERIC Educational Resources Information Center

Carbanaro, Michael; Dawber, Tess; Arav, Isanna

2006-01-01

The purpose of this study was to compare undergraduate nursing students' achievement on examinations for three groups in a mandatory microbiology course. The study represents one aspect of a larger research project designed to gain insight into factors that may influence online learning for distance education nursing students at a Canadian…

Preservice Teachers' Beliefs about Using Maker Activities in Formal K-12 Educational Settings: A Multi-Institutional Study

ERIC Educational Resources Information Center

Jones, W. Monty; Smith, Shaunna; Cohen, Jonathan

2017-01-01

This qualitative study examined preservice teachers' beliefs about using maker activities in formal educational settings. Eighty-two preservice and early-career teachers at three different universities in the United States took part in one-time workshops designed to introduce them to various maker tools and activities applicable to K-12…

Prenatal Care.

ERIC Educational Resources Information Center

Health Resources and Services Administration (DHHS/PHS), Rockville, MD. Office for Maternal and Child Health Services.

This booklet is the first in a series of publications designed to provide parents with useful information about childrearing. Contents are organized into three parts. Part I focuses on the pregnancy, prenatal care, development of the baby, pregnant lifestyles, nutrition, common discomforts, and problems of pregnancy. Part II provides information…

Aerodynamic performance investigation of advanced mechanical suppressor and ejector nozzle concepts for jet noise reduction

NASA Technical Reports Server (NTRS)

Wagenknecht, C. D.; Bediako, E. D.

1985-01-01

Advanced Supersonic Transport jet noise may be reduced to Federal Air Regulation limits if recommended refinements to a recently developed ejector shroud exhaust system are successfully carried out. A two-part program consisting of a design study and a subscale model wind tunnel test effort conducted to define an acoustically treated ejector shroud exhaust system for supersonic transport application is described. Coannular, 20-chute, and ejector shroud exhaust systems were evaluated. Program results were used in a mission analysis study to determine aircraft takeoff gross weight to perform a nominal design mission, under Federal Aviation Regulation (1969), Part 36, Stage 3 noise constraints. Mission trade study results confirmed that the ejector shroud was the best of the three exhaust systems studied with a significant takeoff gross weight advantage over the 20-chute suppressor nozzle which was the second best.

Design and characterization of cellulose nanocrystal-enhanced epoxy hardeners

Treesearch

Shane X. Peng; Robert J. Moon; Jeffrey P. Youngblood

2014-01-01

Cellulose nanocrystals (CNCs) are renewable, sustainable, and abundant nanomaterial widely used as reinforcing fillers in the field of polymer nanocomposites. In this study, two-part epoxy systems with CNC-enhanced hardeners were fabricated. Three types of hardeners, Jeffamine D400 (JD400), diethylenetriamine (DETA), and (±)-trans-1,2- diaminocyclohexane (DACH), were...

Training Humanities Doctoral Students in Collaborative and Digital Multimedia

ERIC Educational Resources Information Center

Ensslin, Astrid; Slocombe, Will

2012-01-01

This study reports on the pedagogic rationale, didactic design and implications of an AHRC-funded doctoral training scheme in collaborative and digital multimedia in the humanities. In the second part of this article we discuss three areas of provision that were identified as particularly significant and/or controversial. These include (1) desktop…

Discover Presidential Log Cabins. Teacher's Discussion Guide.

ERIC Educational Resources Information Center

National Park Service (Dept. of Interior), Washington, DC.

Discover Presidential Log Cabins is a set of materials designed to help educate 6-8 grade students about the significance of three log cabin sites occupied by George Washington, Ulysses Grant, Abraham Lincoln, and Theodore Roosevelt. This teacher's discussion guide is intended for use as part of a larger, comprehensive social studies program, and…

A Playground for All Children. Book 1: User Groups and Site Selection. Book 2: Design Competition Program.

ERIC Educational Resources Information Center

New York City Dept. of City Planning, NY.

These booklets, parts I and II of a three-part series, describe in detail issues related to the future development of an innovative outdoor public playground especially designed for integrated play between handicapped and able-bodied children. The first booklet describes potential user groups--the types of children who are expected to use the…

Metrics for Elementary and Middle Schools: The Curriculum Series.

ERIC Educational Resources Information Center

Kurtz, V. Ray

This book is designed for teachers in elementary and middle schools who need explanations of problems and questions concerning the metric system and a source of classroom activities to aid in teaching the metric system. The book is divided into three parts. The first part is a primer of information designed to help a teacher in answering the many…

Interactive computer aided technology, evolution in the design/manufacturing process

NASA Technical Reports Server (NTRS)

English, C. H.

1975-01-01

A powerful computer-operated three dimensional graphic system and associated auxiliary computer equipment used in advanced design, production design, and manufacturing was described. This system has made these activities more productive than when using older and more conventional methods to design and build aerospace vehicles. With the use of this graphic system, designers are now able to define parts using a wide variety of geometric entities, define parts as fully surface 3-dimensional models as well as "wire-frame" models. Once geometrically defined, the designer is able to take section cuts of the surfaced model and automatically determine all of the section properties of the planar cut, lightpen detect all of the surface patches and automatically determine the volume and weight of the part. Further, his designs are defined mathematically at a degree of accuracy never before achievable.

Individualized Learning Course Evaluation Guidelines.

ERIC Educational Resources Information Center

Bauer, Barbara T.; Everett, Robert L.

These guidelines provide standards for evaluators to estimate the quality of courses being considered for use in the Individualized Learning Center at Bell Telephone Laboratories. There are three parts. Part I guides the course evaluator through the evaluation of course materials, including course design and structure implementation. Part II is a…

Unlearning Established Organizational Routines--Part II

ERIC Educational Resources Information Center

Fiol, C. Marlena; O'Connor, Edward J.

2017-01-01

Purpose: The purpose of Part II of this two-part paper is to uncover important differences in the nature of the three unlearning subprocesses, which call for different leadership interventions to motivate people to move through them. Design/methodology/approach: The paper draws on research in behavioral medicine and psychology to demonstrate that…

Development of formula varsity race car chassis

NASA Astrophysics Data System (ADS)

Abdullah, M. A.; Mansur, M. R.; Tamaldin, N.; Thanaraj, K.

2013-12-01

Three chassis designs have been developed using commercial computer aided design (CAD) software. The design is based on the specifications of UTeM Formula VarsityTM 2012 (FV2012). The selection of the design is derived from weighted matrix which consists of reliability, cost, time consumption and weight. The score of the matrix is formulated based on relative weighted factor among the selections. All three designs are then fabricated using selected materials available. The actual cost, time consumption and weight of the chassis's are compared with the theoretical weighted scores. Standard processes of cuttings, fittings and welding are performed in chassis mock up and fabrication. The chassis is later assembled together with suspension systems, steering linkages, brake systems, engine system, and drive shaft systems. Once the chassis is assembled, the studies of driver's ergonomic and part accessibility are performed. The completion in final fittings and assembly of the race car and its reliability demonstrate an outstanding design for manufacturing (DFM) practices of the chassis.

Job sharing: a retention strategy for nurses.

PubMed

Kane, D

1999-01-01

Job sharing is a part-time employment alternative which offers advantages for employers interested in retaining experienced staff and nurses who are seeking a more equitable balance between work life and home life responsibilities. This quasi experimental, ex post facto research study was designed to determine if there are differences in job satisfaction, burnout, and desire to leave their position, in nurses who are employed in full-time, part-time, or job sharing positions. The sample (N = 269) was drawn from a large Canadian teaching and referral hospital. Three sample groups were developed, consisting of job sharing, full-time, and part-time nurses, respectively. Descriptive statistics were used to identify characteristics of the selected population. Analysis of variance was used to examine differences between the three employment groups on the outcome measures of job satisfaction, burnout, and desire to leave their position. The results of this study significantly support the belief that job sharing has a positive impact on job satisfaction and job retention. Implications for nursing administrators as well as individual nurses will be discussed.

How Do I Manage? An Introduction to Management. An Introductory Package to the Certificate in Management Studies. Revision.

ERIC Educational Resources Information Center

North West Regional Management Centre, Chorley (England).

This book was originally produced in England as part of a self-instructional package designed as an introduction to the course for the Certificate in Management Studies. The package includes a number of self-assessed activities and is expected to take about 20 hours to complete. The course materials are organized in three sections covering the…

Load research manual. Volume 2: Fundamentals of implementing load research procedures

NASA Astrophysics Data System (ADS)

1980-11-01

This manual will assist electric utilities and state regulatory authorities in investigating customer electricity demand as part of cost-of-service studies, rate design, marketing research, system design, load forecasting, rate reform analysis, and load management research. Load research procedures are described in detail. Research programs at three utilities are compared: Carolina Power and Light Company, Long Island Lighting Company, and Southern California Edison Company. A load research bibliography and glossaries of load research and statistical terms are also included.

Revalidation of the Huygens Descent Control Sub-System

NASA Technical Reports Server (NTRS)

2005-01-01

The Huygens probe, part of the Cassini mission to Saturn, is designed to investigate the atmosphere of Titan, Saturn's largest moon. The passage of the probe through the atmosphere is controlled by the Descent Control Sub-System (DCSS), which consists of three parachutes and associated mechanisms. The Cassini / Huygens mission was launched in October 1997 and was designed during the early 1990's. During the time since the design and launch, analysis capabilities have improved significantly, knowledge of the Titan environment has improved and the baseline mission has been modified. Consequently, a study was performed to revalidate the DCSS design against the current predictions.

Developing novel 3D antennas using advanced additive manufacturing technology

NASA Astrophysics Data System (ADS)

Mirzaee, Milad

In today's world of wireless communication systems, antenna engineering is rapidly advancing as the wireless services continue to expand in support of emerging commercial applications. Antennas play a key role in the performance of advanced transceiver systems where they serve to convert electric power to electromagnetic waves and vice versa. Researchers have held significant interest in developing this crucial component for wireless communication systems by employing a variety of design techniques. In the past few years, demands for electrically small antennas continues to increase, particularly among portable and mobile wireless devices, medical electronics and aerospace systems. This trend toward smaller electronic devices makes the three dimensional (3D) antennas very appealing, since they can be designed in a way to use every available space inside the devise. Additive Manufacturing (AM) method could help to find great solutions for the antennas design for next generation of wireless communication systems. In this thesis, the design and fabrication of 3D printed antennas using AM technology is studied. To demonstrate this application of AM, different types of antennas structures have been designed and fabricated using various manufacturing processes. This thesis studies, for the first time, embedded conductive 3D printed antennas using PolyLactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) for substrate parts and high temperature carbon paste for conductive parts which can be a good candidate to overcome the limitations of direct printing on 3D surfaces that is the most popular method to fabricate conductive parts of the antennas. This thesis also studies, for the first time, the fabrication of antennas with 3D printed conductive parts which can contribute to the new generation of 3D printed antennas.

Doppler Lidar System Design via Interdisciplinary Design Concept at NASA Langley Research Center - Part II

NASA Technical Reports Server (NTRS)

Crasner, Aaron I.; Scola,Salvatore; Beyon, Jeffrey Y.; Petway, Larry B.

2014-01-01

Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. Thermal modeling software was used to run steady state thermal analyses, which were used to both validate the designs and recommend further changes. Analyses were run on each redesign, as well as the original system. Thermal Desktop was used to run trade studies to account for uncertainty and assumptions about fan performance and boundary conditions. The studies suggested that, even if the assumptions were significantly wrong, the redesigned systems would remain within operating temperature limits.

A Modeling Tool for Household Biogas Burner Flame Port Design

NASA Astrophysics Data System (ADS)

Decker, Thomas J.

Anaerobic digestion is a well-known and potentially beneficial process for rural communities in emerging markets, providing the opportunity to generate usable gaseous fuel from agricultural waste. With recent developments in low-cost digestion technology, communities across the world are gaining affordable access to the benefits of anaerobic digestion derived biogas. For example, biogas can displace conventional cooking fuels such as biomass (wood, charcoal, dung) and Liquefied Petroleum Gas (LPG), effectively reducing harmful emissions and fuel cost respectively. To support the ongoing scaling effort of biogas in rural communities, this study has developed and tested a design tool aimed at optimizing flame port geometry for household biogas-fired burners. The tool consists of a multi-component simulation that incorporates three-dimensional CAD designs with simulated chemical kinetics and computational fluid dynamics. An array of circular and rectangular port designs was developed for a widely available biogas stove (called the Lotus) as part of this study. These port designs were created through guidance from previous studies found in the literature. The three highest performing designs identified by the tool were manufactured and tested experimentally to validate tool output and to compare against the original port geometry. The experimental results aligned with the tool's prediction for the three chosen designs. Each design demonstrated improved thermal efficiency relative to the original, with one configuration of circular ports exhibiting superior performance. The results of the study indicated that designing for a targeted range of port hydraulic diameter, velocity and mixture density in the tool is a relevant way to improve the thermal efficiency of a biogas burner. Conversely, the emissions predictions made by the tool were found to be unreliable and incongruent with laboratory experiments.

ODYSSEUS autonomous walking robot: The leg/arm design

NASA Technical Reports Server (NTRS)

Bourbakis, N. G.; Maas, M.; Tascillo, A.; Vandewinckel, C.

1994-01-01

ODYSSEUS is an autonomous walking robot, which makes use of three wheels and three legs for its movement in the free navigation space. More specifically, it makes use of its autonomous wheels to move around in an environment where the surface is smooth and not uneven. However, in the case that there are small height obstacles, stairs, or small height unevenness in the navigation environment, the robot makes use of both wheels and legs to travel efficiently. In this paper we present the detailed hardware design and the simulated behavior of the extended leg/arm part of the robot, since it plays a very significant role in the robot actions (movements, selection of objects, etc.). In particular, the leg/arm consists of three major parts: The first part is a pipe attached to the robot base with a flexible 3-D joint. This pipe has a rotated bar as an extended part, which terminates in a 3-D flexible joint. The second part of the leg/arm is also a pipe similar to the first. The extended bar of the second part ends at a 2-D joint. The last part of the leg/arm is a clip-hand. It is used for selecting several small weight and size objects, and when it is in a 'closed' mode, it is used as a supporting part of the robot leg. The entire leg/arm part is controlled and synchronized by a microcontroller (68CH11) attached to the robot base.

Nondestructive methods of integrating energy harvesting systems for highway bridges

NASA Astrophysics Data System (ADS)

Inamdar, Sumedh; Zimowski, Krystian; Crawford, Richard; Wood, Kristin; Jensen, Dan

2012-04-01

Designing an attachment structure that is both novel and meets the system requirements can be a difficult task especially for inexperienced designers. This paper presents a design methodology for concept generation of a "parent/child" attachment system. The "child" is broadly defined as any device, part, or subsystem that will attach to any existing system, part, or device called the "parent." An inductive research process was used to study a variety of products, patents, and biological examples that exemplified the parent/child system. Common traits among these products were found and categorized as attachment principles in three different domains: mechanical, material, and field. The attachment principles within the mechanical domain and accompanying examples are the focus of this paper. As an example of the method, a case study of generating concepts for a bridge mounted wind energy harvester using the mechanical attachment principles derived from the methodology and TRIZ principles derived from Altshuller's matrix of contradictions is presented.

Data related to the experimental design for powder bed binder jetting additive manufacturing of silicone.

PubMed

Liravi, Farzad; Vlasea, Mihaela

2018-06-01

The data included in this article provides additional supporting information on our recent publication (Liravi et al., 2018 [1]) on a novel hybrid additive manufacturing (AM) method for fabrication of three-dimensional (3D) structures from silicone powder. A design of experiments (DoE) study has been carried out to optimize the geometrical fidelity of AM-made parts. This manuscript includes the details of a multi-level factorial DOE and the response optimization results. The variation in the temperature of powder-bed when exposed to heat is plotted as well. Furthermore, the effect of blending ratio of two parts of silicone binder on its curing speed was investigated by conducting DSC tests on a silicone binder with 100:2 precursor to curing agent ratio. The hardness of parts fabricated with non-optimum printing conditions are included and compared.

Habits of Mind: A Case Study of Three Teachers' Experiences with a Mindfulness-Based Intervention

ERIC Educational Resources Information Center

Dunn, Molly S.

2017-01-01

K-12 teachers encounter numerous occupational stressors as part of their profession, and these stressors place them at risk of job-related stress and burnout (Maslach & Jackson, 1981; Maslach, Schaufeli, & Leiter, 2001). Given the prevalence of stress and burnout among school personnel, concrete interventions designed to address the unique…

Readings in Wildlife and Fish Conservation, High School Conservation Curriculum Project.

ERIC Educational Resources Information Center

Ensminger, Jack

This publication is a tentative edition of readings on Wildlife and Fish Conservation in Louisiana, and as such it forms part of one of the four units of study designed for an experimental high school course, the "High School Conservation Curriculum Project." The other three units are concerned with Forest Conervation, Soil and Water…

Cultural Transmission of Tool Use in Young Children: A Diffusion Chain Study

ERIC Educational Resources Information Center

Flynn, Emma; Whiten, Andrew

2008-01-01

Developmental and gender effects in the transmission of information about a tool-use task were investigated within a "diffusion chain" design. One hundred and twenty-seven children (65 three-year-olds and 62 five-year-olds) participated. Eighty children took part in diffusion chains in which consecutive children in chains of five witnessed two…

University-School Partnerships for Clinical Experiences: Design, Implementation, Assessment, and Data Collection

ERIC Educational Resources Information Center

Sivakumaran, Thillainatarajan; Holland, Glenda; Clark, Leonard; Heyning, Katharina; Wishart, William; Flowers-Gibson, Beverly

2011-01-01

University teacher education programs establish partnerships with P-12 schools, in part to place their teacher education candidates in a learning environment that allows candidates to work with a diverse population of learners. The purpose of this study was to examine three universities in regard to the partnerships utilized for field and clinical…

Assessing Knowledge and Attitudes about End of Life: Evaluation of Three Instruments Designed for Adults with Intellectual Disability

ERIC Educational Resources Information Center

Stancliffe, R. J.; Wiese, M. Y.; Read, S.; Jeltes, G.; Clayton, J. M.

2017-01-01

Background: This paper examines the development and psychometric characteristics of three instruments about end of life, designed for use with adults with intellectual disability (ID). Respectively, the instruments assess understanding of the concept of death, end-of-life planning, and fear of death. Methods: Part 1: instruments were developed or…

The 1992-1993 advanced design program. Part 1: The Mars methane engine project. Part 2: The Mars oxygen processor new furnace

NASA Astrophysics Data System (ADS)

Lauer, Stephen; Hoover, Scott; Lawrence, Lori; Paparistodemou, Christos; Taylor, Doug

1993-04-01

Three constituents of the Martian atmosphere, methane, carbon dioxide, and oxygen, can be used for internal combustion in engines utilized for future space exploration on Mars. These three gases, considered as the test case in this research, will be examined to determine required flow rates needed for combustion and optimization of engine performance. Results of the test case are examined in relation to a base case of methane and air for comparative purposes. Testing of exhaust temperatures, cylinder pressure, and exhaust gas analysis were performed for the base case and test case. Also described is a study utilizing a zirconia cell to convert carbon dioxide into usable oxygen to help support future Mars missions.

The 1992-1993 advanced design program. Part 1: The Mars methane engine project. Part 2: The Mars oxygen processor new furnace

NASA Technical Reports Server (NTRS)

Lauer, Stephen; Hoover, Scott; Lawrence, Lori; Paparistodemou, Christos; Taylor, Doug

1993-01-01

Three constituents of the Martian atmosphere, methane, carbon dioxide, and oxygen, can be used for internal combustion in engines utilized for future space exploration on Mars. These three gases, considered as the test case in this research, will be examined to determine required flow rates needed for combustion and optimization of engine performance. Results of the test case are examined in relation to a base case of methane and air for comparative purposes. Testing of exhaust temperatures, cylinder pressure, and exhaust gas analysis were performed for the base case and test case. Also described is a study utilizing a zirconia cell to convert carbon dioxide into usable oxygen to help support future Mars missions.

"Teamwork in hospitals": a quasi-experimental study protocol applying a human factors approach.

PubMed

Ballangrud, Randi; Husebø, Sissel Eikeland; Aase, Karina; Aaberg, Oddveig Reiersdal; Vifladt, Anne; Berg, Geir Vegard; Hall-Lord, Marie Louise

2017-01-01

Effective teamwork and sufficient communication are critical components essential to patient safety in today's specialized and complex healthcare services. Team training is important for an improved efficiency in inter-professional teamwork within hospitals, however the scientific rigor of studies must be strengthen and more research is required to compare studies across samples, settings and countries. The aims of the study are to translate and validate teamwork questionnaires and investigate healthcare personnel's perception of teamwork in hospitals (Part 1). Further to explore the impact of an inter-professional teamwork intervention in a surgical ward on structure, process and outcome (Part 2). To address the aims, a descriptive, and explorative design (Part 1), and a quasi-experimental interventional design will be applied (Part 2). The study will be carried out in five different hospitals (A-E) in three hospital trusts in Norway. Frontline healthcare personnel in Hospitals A and B, from both acute and non-acute departments, will be invited to respond to three Norwegian translated teamwork questionnaires (Part 1). An inter-professional teamwork intervention in line with the TeamSTEPPS recommend Model of Change will be implemented in a surgical ward at Hospital C. All physicians, registered nurses and assistant nurses in the intervention ward and two control wards (Hospitals D and E) will be invited to to survey their perception of teamwork, team decision making, safety culture and attitude towards teamwork before intervention and after six and 12 months. Adult patients admitted to the intervention surgical unit will be invited to survey their perception of quality of care during their hospital stay before intervention and after six and 12 month. Moreover, anonymous patient registry data from local registers and data from patients' medical records will be collected (Part 2). This study will help to understand the impact of an inter-professional teamwork intervention in a surgical ward and contribute to promote healthcare personnel's team competences with an opportunity to achieve changes in work processes and patient safety. Trial registration number (TRN) is ISRCTN13997367. The study was registered retrospectively with registration date 30.05.2017.

Optical design of optical synthetic aperture telescope

NASA Astrophysics Data System (ADS)

Zhou, Chenghao; Wang, Zhile

2018-03-01

Optical synthetic aperture (OSA) is a promising solution for very high-resolution imaging while reducing its volume and mass. In this paper, first, the configuration of OSA systems are analyzed and the design methods of two types (Fizeau and Michelson) of OSA systems are summarized and researched. Second, Fizeau and Michelson OSA prototype systems are designed in detail. In the Michelson configuration, the instrument is made of sub-telescopes distributed in entrance pupil and combined by a common telescope via phase delay line. The design of Michelson configuration is more difficult than that of Fizeau configuration. In the design of Fizeau configuration, according to the third aberration theory tworeflective system is designed. Then the primary mirror of the two mirror system is replaced by the synthetic aperture. The whole system was simulated by Zemax software to obtain the Modulation transform function (MTF). In the design of Michelson configuration, the system is first divided into three parts: the afocal interferometric telescopes, beam combiner system and phase delay line. The three parts are designed respectively and then combined in Zemax software to obtain the MTF.

Sourcebook on Food and Nutrition. Third Edition.

ERIC Educational Resources Information Center

Scarpa, Ioannis S., Ed.; And Others

This four-part book is a compendium of current dietary information and is designed primarily as a reference tool for anyone interested in the field of nutrition. The book's first three parts each contain papers generated from nutrition-related research. Part 1, "Dietary Directions in the 1980s," begins by discussing efforts of major governmental…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baumgardt, D.R.; Carter, S.; Maxson, M.

The objective of this project is to design and develop an Intelligent Event Identification System, or ISEIS, which will be a prototype for routine event identification of small explosions and earthquakes and to serve as a tool for discrimination research. The first part of this study gives an overview of the system design and the results of a preliminary evaluation of the system on events in Scandinavia and the Soviet Union. The system was designed to be highly modular to allow the easy incorporation of new discriminants and/or discrimination processes. Because the main objective of the system is the identificationmore » of small events, most of the initial ISEIS prototype discriminants utilize regional seismic data recorded by the regional arrays, NORESS and ARCESS. However, ISEIS can easily process other regional array data (e.g., from GERESS and FINESA), as well as data from three-component single stations, as more of this data becomes available. The second part of this study is entitled Intelligent Event Identification System: User's Manual, and gives a detailed description of all the processing interfaces of ISEIS. The third part of this study is entitled Intelligent Event Identification System: Software Maintenance Manual, which describes the ISEIS software from the programmer's perspective and provides information for maintenance and modification of the software modules in the system.« less

Topology optimized gold nanostrips for enhanced near-infrared photon upconversion

NASA Astrophysics Data System (ADS)

Vester-Petersen, Joakim; Christiansen, Rasmus E.; Julsgaard, Brian; Balling, Peter; Sigmund, Ole; Madsen, Søren P.

2017-09-01

This letter presents a topology optimization study of metal nanostructures optimized for electric-field enhancement in the infrared spectrum. Coupling of such nanostructures with suitable ions allows for an increased photon-upconversion yield, with one application being an increased solar-cell efficiency by exploiting the long-wavelength part of the solar spectrum. In this work, topology optimization is used to design a periodic array of two-dimensional gold nanostrips for electric-field enhancements in a thin film doped with upconverting erbium ions. The infrared absorption band of erbium is utilized by simultaneously optimizing for two polarizations, up to three wavelengths, and three incident angles. Geometric robustness towards manufacturing variations is implemented considering three different design realizations simultaneously in the optimization. The polarization-averaged field enhancement for each design is evaluated over an 80 nm wavelength range and a ±15-degree incident angle span. The highest polarization-averaged field enhancement is 42.2 varying by maximally 2% under ±5 nm near-uniform design perturbations at three different wavelengths (1480 nm, 1520 nm, and 1560 nm). The proposed method is generally applicable to many optical systems and is therefore not limited to enhancing photon upconversion.

Hydrogen turbine power conversion system assessment

NASA Technical Reports Server (NTRS)

Wright, D. E.; Lucci, A. D.; Campbell, J.; Lee, J. C.

1978-01-01

A three part technical study was conducted whereby parametric technical and economic feasibility data were developed on several power conversion systems suitable for the generation of central station electric power through the combustion of hydrogen and the use of the resulting heat energy in turbogenerator equipment. The study assessed potential applications of hydrogen-fueled power conversion systems and identified the three most promising candidates: (1) Ericsson Cycle, (2) gas turbine, and (3) direct steam injection system for fossil fuel as well as nuclear powerplants. A technical and economic evaluation was performed on the three systems from which the direct injection system (fossil fuel only) was selected for a preliminary conceptual design of an integrated hydrogen-fired power conversion system.

A testbed for the evaluation of computer aids for enroute flight path planning

NASA Technical Reports Server (NTRS)

Smith, Philip J.; Layton, Chuck; Galdes, Deb; Mccoy, C. E.

1990-01-01

A simulator study of the five airline flight crews engaged in various enroute planning activities has been conducted. Based on a cognitive task analysis of this data, a flight planning workstation has been developed on a Mac II controlling three color monitors. This workstation is being used to study design concepts to support the flight planning activities of dispatchers and flight crews in part-task simulators.

Working draft of the FDA GMP final rule (Part II).

PubMed

Donawa, M E

1995-11-01

Part I of this two-part series provided information on the proposed design control provisions of the US Food and Drug Administration's (FDA) working draft of the final rule for new good manufacturing practice regulations for medical devices. The final rule could be published in April or May 1996. It would be in force 180 days after the date of publication. Design control requirements may become effective some months later. This article describes recommended modifications of three provisions that have been intensely discussed during recent FDA-sponsored public meetings.

High transonic speed transport aircraft study. [aerodynamic characteristics of single-fuselage, yawed-wing configuration

NASA Technical Reports Server (NTRS)

Kulfan, R. M.; Neumann, F. D.; Nisbet, J. W.; Mulally, A. R.; Murakami, J. K.; Noble, E. C.; Mcbarron, J. P.; Stalter, J. L.; Gimmestad, D. W.; Sussman, M. B.

1973-01-01

An initial design study of high-transonic-speed transport aircraft has been completed. Five different design concepts were developed. These included fixed swept wing, variable-sweep wing, delta wing, double-fuselage yawed-wing, and single-fuselage yawed-wing aircraft. The boomless supersonic design objectives of range=5560 Km (3000 nmi), payload-18 143 kg (40 000lb), Mach=1.2, and FAR Part 36 aircraft noise levels were achieved by the single-fuselage yawed-wing configuration with a gross weight of 211 828 Kg (467 000 lb). A noise level of 15 EPNdB below FAR Part 36 requirements was obtained with a gross weight increase to 226 796 Kg (500 000 lb). Although wing aeroelastic divergence was a primary design consideration for the yawed-wing concepts, the graphite-epoxy wings of this study were designed by critical gust and maneuver loads rather than by divergence requirements. The transonic nacelle drag is shown to be very sensitive to the nacelle installation. A six-degree-of-freedom dynamic stability analysis indicated that the control coordination and stability augmentation system would require more development than for a symmetrical airplane but is entirely feasible. A three-phase development plan is recommended to establish the full potential of the yawed-wing concept.

SKITTER/implement mechanical interface

NASA Technical Reports Server (NTRS)

Cash, John Wilson, III; Cone, Alan E.; Garolera, Frank J.; German, David; Lindabury, David Peter; Luckado, Marshall Cleveland; Murphey, Craig; Rowell, John Bryan; Wilkinson, Brad

1988-01-01

SKITTER (Spacial Kinematic Inertial Translatory Tripod Extremity Robot) is a three-legged transport vehicle designed to perform under the unique environment of the moon. The objective of this project was to design a mechanical interface for SKITTER. This mechanical latching interface will allow SKITTER to use a series of implements such as drills, cranes, etc., and perform different tasks on the moon. The design emphasized versatility and detachability; that is, the interface design is the same for all implements, and connection and detachment is simple. After consideration of many alternatives, a system of three identical latches at each of the three interface points was chosen. The latching mechanism satisfies the design constraints because it facilitates connection and detachment. Also, the moving parts are protected from the dusty environment by housing plates.

Application of Three Quasi-Experimental Designs.

ERIC Educational Resources Information Center

Cordray, David S.

Presented as part of a symposium on evaluation on juvenile diversion programs, this brief paper describes several specific research procedures which have been utilized to help decide which type of diversion approach is best for specific types of clients. Procedures discussed are the regression discontinuity design, the tie-breaker design, and the…

A new Ti-5Ag alloy for customized prostheses by three-dimensional printing (3DP).

PubMed

Hong, S B; Eliaz, N; Leisk, G G; Sach, E M; Latanision, R M; Allen, S M

2001-03-01

Three important considerations in the fabrication of customized cranio-maxillofacial prostheses are geometric precision, material strength, and biocompatibility. Three-dimensional printing (3DP) is a rapid part-fabrication process that can produce complex parts with high precision. The aim of this study was to design, synthesize by 3DP, and characterize a new Ti-5Ag (wt%) alloy. Silver nitrate was found to be an appropriate inorganic binder for the Ti powder-based skeleton, and the optimum sintering parameters for full densification were determined. The hardness of the Ti-5Ag alloy was shown to be much higher than that of a pure titanium sample. Potentiodynamic measurements, carried out in saline solution at body temperature, showed that the Ti-5Ag alloy had good passivation behavior, similar to that of pure titanium. It is concluded that the Ti-Ag system may be suitable for fabrication of customized prostheses by 3DP.

Post-Occupancy Evaluation of a Mental Healthcare Facility Based on Staff Perceptions of Design Innovations.

PubMed

Kalantari, Saleh; Snell, Robin

2017-07-01

This study was a post-occupancy evaluation (POE) to examine the effectiveness of three specific design innovations in a mental healthcare facility. In addition to collecting data about the impact of these specific designs, the study provides a model for the broader implementation of POE approaches in the mental healthcare context. POEs in general healthcare settings have been shown to lead to better work environments and better outcomes for patients. Despite growing evidence of the value provided by POE studies, the industry has been somewhat slow to adopt their regular use, in part due to unfamiliarity with the POE process. This is particularly true in mental healthcare contexts, where POE studies remain virtually nonexistent. In-depth interviews and a widely distributed, anonymous survey were used to collect hospital staff perceptions and feedback regarding the impact of specific design features. The hospital staff were quite enthusiastic about two of the design innovations studied here (a new wayfinding strategy and the use of vibrant colors in specific areas of the facility). The third innovation, open-style communication centers, elicited more mixed evaluations. The results include extensive hypothesis testing about the effects of each innovation as well as narrative discussions of their pros and cons. The study generated new knowledge about three specific mental healthcare design innovations and provides a model for the practical implementation of a POE approach in mental healthcare contexts. The results are particularly relevant for designers who are considering innovative strategies in future mental healthcare facilities.

Design principles for elementary gene circuits: Elements, methods, and examples

NASA Astrophysics Data System (ADS)

Savageau, Michael A.

2001-03-01

The control of gene expression involves complex circuits that exhibit enormous variation in design. For years the most convenient explanation for these variations was historical accident. According to this view, evolution is a haphazard process in which many different designs are generated by chance; there are many ways to accomplish the same thing, and so no further meaning can be attached to such different but equivalent designs. In recent years a more satisfying explanation based on design principles has been found for at least certain aspects of gene circuitry. By design principle we mean a rule that characterizes some biological feature exhibited by a class of systems such that discovery of the rule allows one not only to understand known instances but also to predict new instances within the class. The central importance of gene regulation in modern molecular biology provides strong motivation to search for more of these underlying design principles. The search is in its infancy and there are undoubtedly many design principles that remain to be discovered. The focus of this three-part review will be the class of elementary gene circuits in bacteria. The first part reviews several elements of design that enter into the characterization of elementary gene circuits in prokaryotic organisms. Each of these elements exhibits a variety of realizations whose meaning is generally unclear. The second part reviews mathematical methods used to represent, analyze, and compare alternative designs. Emphasis is placed on particular methods that have been used successfully to identify design principles for elementary gene circuits. The third part reviews four design principles that make specific predictions regarding (1) two alternative modes of gene control, (2) three patterns of coupling gene expression in elementary circuits, (3) two types of switches in inducible gene circuits, and (4) the realizability of alternative gene circuits and their response to phased environmental cues. In each case, the predictions are supported by experimental evidence. These results are important for understanding the function, design, and evolution of elementary gene circuits.

Basic research for development of the beam profile monitor based on a Faraday cup array system

NASA Astrophysics Data System (ADS)

Park, Mook-Kwang

2015-10-01

The basic design used to develop a beam profile monitor based on a Faraday cup array (FCA), which has the advantages of high robustness, reliability, and long-term stability, along with the ability to measure the ion current over a wide dynamic range, was developed. The total system is divided into three parts: i.e., a faraday cup, measuring electronics, and a display program part. The FCA was considered to consist of a collimator, suppressor, insulator frame, and 64 (8 × 8 array) tiny Faraday cups (FC). An electronic circuit using a multiplexer was applied to effectively address many signal lines and the printed circuit board (PCB) was designed to be divided into three parts, i.e., an electrode PCB (ELEC PCB), capacitance PCB (CAP PCB), and control PCB (CON PCB).

ORNL Named as Part of IAES Research Reactor Hub

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The International Atomic Energy Agency (IAEA) has named ORNL and Idaho National Laboratory part of an International Centre based on Research Reactors. The designation makes the United States one of only three countries identified for unique capabilities and excellence in nuclear research.

Use of Data for Fiscal Management of State Part C Systems

ERIC Educational Resources Information Center

Greer, Maureen; Kilpatrick, Jamie; McCullough, Katy; Reid, Kellen

2015-01-01

"Use of Data for Fiscal Management of State Part C Systems" is designed to increase the knowledge and skills of lead agency staff regarding the use of data for appropriate fiscal management of Part C. This document addresses budget development and management. This document has three sections: (1) Budget Development and Management; (2)…

People of the Prairies: A Norwegian and German-Russian Curriculum Guide.

ERIC Educational Resources Information Center

Tabbert, Jon Charles, Ed.; Peterson, Fredrick E., Ed.

The guide presents secondary level units designed to promote understanding of the two largest ethnic groups in North Dakota, the Norwegians and the German-Russians. The book is presented in five parts. Part I provides an historical overview of the Norwegian and German-Russian migration to North Dakota. Part II presents three Norwegian units on…

Psychotropic and Anticonvulsant Drug Usage in Early Childhood Special Education Programs I. Phase One: A Preliminary Report: Prevalence, Attitude, Training, and Problems.

ERIC Educational Resources Information Center

Gadow, Kenneth D.

As part of a three phase study designed to survey the teachers and parents of children receiving psychotropic and anticonvulsant drugs, 208 teachers of preschool special education children on medication were mailed questionnaires. The Early Childhood Medication Questionnaire used in the survey included items relating to teacher, program, and…

Using Eye Tracking as a Tool to Teach Informatics Students the Importance of User Centered Design

ERIC Educational Resources Information Center

Gelderblom, Helene; Adebesin, Funmi; Brosens, Jacques; Kruger, Rendani

2017-01-01

In this article the authors describe how they incorporate eye tracking in a human-computer interaction (HCI) course that forms part of a postgraduate Informatics degree. The focus is on an eye tracking assignment that involves student groups performing usability evaluation studies for real world clients. Over the past three years the authors have…

Development of a current collection loss management system for SDI homopolar power supplies

NASA Astrophysics Data System (ADS)

Brown, D. W.

1991-04-01

High speed, high power density current collection systems have been identified as an enabling technology required to construct homopolar power supplies to meet SDI missions. This work is part of a three-year effort directed towards the analysis, experimental verification, and prototype construction of a current collection system designed to operate continuously at 2 kA/sq cm, at a rubbing speed of 200 m/s, and with acceptable losses in a space environment. To date, no system has achieved these conditions simultaneously. This is the final report covering the three year period of performance on DOE contract AC03-86SF-16518. Major areas covered include design, construction and operation of a cryogenically cooled brush test rig, design and construction of a high speed brush test rig, optimization study for homopolar machines, loss analysis of the current collection system, and an application study which defines the air-core homopolar construction necessary to achieve the goal of 80 kW/kg generator power density.

The effects of luminance contrast, colour combinations, font, and search time on brand icon legibility.

PubMed

Ko, Ya-Hsien

2017-11-01

This study explored and identified the effects of luminance contrast, colour combinations, font, and search time on brand icon legibility. A total of 108 participants took part in the experiment. As designed, legibility was measured as a function of the following independent variables: four levels of luminance contrast, sixteen target/background colour combinations, two fonts, and three search times. The results showed that a luminance contrast of 18:1 provided readers with the best legibility. Yellow on black, yellow on blue, and white on blue were the three most legible colour combinations. One of this study's unique findings was that colour combinations may play an even more important role than luminance contrast in the overall legibility of brand icon design. The 12-s search time corresponded with the highest legibility. Arial font was more legible than Times New Roman. These results provide some guidance for brand icon and product advertisement design. Copyright © 2017 Elsevier Ltd. All rights reserved.

The stress-reducing effects of art in pediatric health care: art preferences of healthy children and hospitalized children.

PubMed

Eisen, Sarajane L; Ulrich, Roger S; Shepley, Mardelle M; Varni, James W; Sherman, Sandra

2008-09-01

Art is assumed to possess therapeutic benefits of healing for children, as part of patient-focused design in health care. Since the psychological and physiological well-being of children in health care settings is extremely important in contributing to the healing process, it is vitally important to identify what type of art supports stress reduction. Based on adult studies, nature art was anticipated to be the most preferred and to have stress-reducing effects on pediatric patients. Nature art refers to art images dominated by natural vegetation, flowers or water. The objective of this study was to investigate what type of art image children prefer, and what type of art image has potentially stress-reducing effects on children in hospitals. This study used a three-phase, multi-method approach with children aged 5-17 years: a focus group study (129 participants), a randomized study (48 participants), and a quasi-experimental study design (48 participants). Findings were evaluated from three phases.

Biomechanical evaluation of CIBOR spine interbody fusion device.

PubMed

Chong, Alexander C M; Harrer, Seth W; Heggeness, Michael H; Wooley, Paul H

2017-07-01

The CIBOR PEEK spinal interbody fusion device is an anterior lumbar interbody fusion construct with a hollow center designed to accommodate an osteoinductive carbon foam insert to promote bony ingrowth to induce fusion where rigid stabilization is needed. Three different sizes of the device were investigated. Part-I: implants were tested under axial compression and rotation using polyurethane foam blocks. Part-II: simulated 2-legged stance using cadaveric specimen using the L5-S1 lumbar spine segment. Part-III: a survey feedback form was used to investigate two orthopedic surgeons concern regarding the implant. In Part-I, the subsidence hysteresis under axial compression loading was found to be statistical significant difference between these three implant sizes. It was noted that the implants had migration as rotation applied, and the amount of subsidence was a factor of the axial compression loads applied. In Part-II, a minor subsidence and carbon foam debris were observed when compared to each implant size. Poor contact surface of the implant with the end plates of the L5 or S1 vertebrae from the anterior view under maximum loads was observed; however, the implant seemed to be stable. Each surgeon has their own subjective opinion about the CIBOR implant. Two out of the three different sizes of the device (medium and large sizes) provided appropriate rigid stabilization at the physiological loads. Neither orthopedic surgeon was 100% satisfied with overall performance of the implant, but felt potential improvement could be made. This study indicates an option for operative treatment of spine interbody fusion, as the CIBOR spine interbody fusion device has a hollow center. This hollow center is designed to accommodate a carbon foam insert to promote bony ingrowth. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1157-1168, 2017. © 2016 Wiley Periodicals, Inc.

Dose-specific efficacy of Haemophilus influenzae type b conjugate vaccines: a systematic review and meta-analysis of controlled clinical trials

PubMed Central

GRIFFITHS, U. K.; CLARK, A.; GESSNER, B.; MINERS, A.; SANDERSON, C.; SEDYANINGSIH, E. R.; MULHOLLAND, K. E.

2012-01-01

SUMMARY Global coverage of infant Haemophilus influenzae type b (Hib) vaccination has increased considerably during the past decade, partly due to GAVI Alliance donations of the vaccine to low-income countries. In settings where large numbers of children receive only one or two vaccine doses rather than the recommended three doses, dose-specific efficacy estimates are needed to predict impact. The objective of this meta-analysis is to determine Hib vaccine efficacy against different clinical outcomes after receiving one, two or three doses of vaccine. Studies were eligible for inclusion if a prospective, controlled design had been used to evaluate commercially available Hib conjugate vaccines. Eight studies were included. Pooled vaccine efficacies against invasive Hib disease after one, two or three doses of vaccine were 59%, 92% and 93%, respectively. The meta-analysis provides robust estimates for use in decision-analytical models designed to predict the impact of Hib vaccine. PMID:22583474

Aerodynamic performances of three fan stator designs operating with rotor having tip speed of 337 meters per second and pressure ratio of 1.54. 1: Experimental performance

NASA Technical Reports Server (NTRS)

Gelder, T. F.

1980-01-01

The aerodynamic performances of four stator-blade rows are presented and evaluated. The aerodynamic designs of two of these stators were compromised to reduce noise, a third design was not. On a calculated operating line passing through the design point pressure ratio, the best stator had overall pressure-ratio and efficiency decrements of 0.031 and 0.044, respectively, providing a stage pressure ratio of 1.483 and efficiency of 0.865. The other stators showed some correctable deficiencies due partly to the design compromises for noise. In the end-wall regions blade-element losses were significantly less for the shortest chord studied.

Dairy Herd Health.

ERIC Educational Resources Information Center

Wolanyk, Alison M.; Bishop, Natalie

This monograph, designed to help secondary students recognize symptoms of major dairy cattle diseases, stresses the need for preventative management practices and cooperation between the dairy farmer and the veterinarian. The first of three parts, The Healthy Animal, is divided into five units: body parts, vital signs, excretions, behavior, and…

A low-cost machine vision system for the recognition and sorting of small parts

NASA Astrophysics Data System (ADS)

Barea, Gustavo; Surgenor, Brian W.; Chauhan, Vedang; Joshi, Keyur D.

2018-04-01

An automated machine vision-based system for the recognition and sorting of small parts was designed, assembled and tested. The system was developed to address a need to expose engineering students to the issues of machine vision and assembly automation technology, with readily available and relatively low-cost hardware and software. This paper outlines the design of the system and presents experimental performance results. Three different styles of plastic gears, together with three different styles of defective gears, were used to test the system. A pattern matching tool was used for part classification. Nine experiments were conducted to demonstrate the effects of changing various hardware and software parameters, including: conveyor speed, gear feed rate, classification, and identification score thresholds. It was found that the system could achieve a maximum system accuracy of 95% at a feed rate of 60 parts/min, for a given set of parameter settings. Future work will be looking at the effect of lighting.

Buckling analysis of the quadripod structure for the NASA 70-meter antenna

NASA Technical Reports Server (NTRS)

Chian, Chian T.

1987-01-01

As part of the effort to extend the diameter of three Deep Space Network large earth antennas from 64 meters to 70 meters, a slim profiled quadripod structure was designed to support a 7.7 meter diameter subreflector for the 70 meter antenna. The new quadripod design, which particularly emphasizes reduced radio frequency blockage, is achieved by means of a narrow cross sectional profile of the legs. Buckling analysis, using NASTRAN, was conducted in this study to verify the safety margin for the quadripod structural stability.

A new method for designing shock-free transonic configurations

NASA Technical Reports Server (NTRS)

Sobieczky, H.; Fung, K. Y.; Seebass, A. R.; Yu, N. J.

1978-01-01

A method for the design of shock free supercritical airfoils, wings, and three dimensional configurations is described. Results illustrating the procedure in two and three dimensions are given. They include modifications to part of the upper surface of an NACA 64A410 airfoil that will maintain shock free flow over a range of Mach numbers for a fixed lift coefficient, and the modifications required on part of the upper surface of a swept wing with an NACA 64A410 root section to achieve shock free flow. While the results are given for inviscid flow, the same procedures can be employed iteratively with a boundary layer calculation in order to achieve shock free viscous designs. With a shock free pressure field the boundary layer calculation will be reliable and not complicated by the difficulties of shock wave boundary layer interaction.

Space Station Furnace Facility. Volume 2: Requirements definition and conceptual design study

NASA Technical Reports Server (NTRS)

1992-01-01

The Space Station Freedom Furnace (SSFF) Project is divided into two phases: phase 1, a definition study phase, and phase 2, a design and development phase. TBE was awarded a research study entitled, 'Space Station Furnace Facility Requirements Definition and Conceptual Design Study' on June 2, 1989. This report addresses the definition study phase only. Phase 2 is to be complete after completion of phase 1. The contract encompassed a requirements definition study and culminated in hardware/facility conceptual designs and hardware demonstration development models to test these conceptual designs. The study was divided into two parts. Part 1 (the basic part of the effort) encompassed preliminary requirements definition and assessment; conceptional design of the SSFF Core; fabrication of mockups; and preparation for the support of a conceptional design review (CoDR). Part 2 (the optional part of the effort) included detailed definition of the engineering and design requirements, as derived from the science requirements; refinement of the conceptual design of the SSFF Core; fabrication and testing of the 'breadboards' or development models; and preparation for and support of a requirements definition review.

Bicycle Education, A New Dimension in 4-H Programs for 8-11 Year Olds: Designed into Three Teaching Units.

ERIC Educational Resources Information Center

Borst, William H.

The three teaching units in this packet are designed to help children ages 8 to 11 enjoy, utilize, and safely ride bicycles by mastering skills and knowledge pertaining to their bicycles, their driving ability, and the traffic system. Unit I is concerned with the bicycle and its parts, various kinds of bicycles, and proper size and maintenance.…

29 CFR 1918.62 - Miscellaneous auxiliary gear.

Code of Federal Regulations, 2010 CFR

2010-07-01

... appendix II to this part. A design safety factor of at least five shall be maintained for the common sizes... cranes, designed to be used with lesser wire rope safety factors; (ii) According to design factors in... pre-slung drafts. (3) Eye splices shall consist of at least three full tucks. Short splices shall...

29 CFR 1918.62 - Miscellaneous auxiliary gear.

Code of Federal Regulations, 2011 CFR

2011-07-01

... appendix II to this part. A design safety factor of at least five shall be maintained for the common sizes... cranes, designed to be used with lesser wire rope safety factors; (ii) According to design factors in... pre-slung drafts. (3) Eye splices shall consist of at least three full tucks. Short splices shall...

Development of a preprototype vapor compression distillation water recovery subsystem

NASA Technical Reports Server (NTRS)

Johnson, K. L.

1978-01-01

The activities involved in the design, development, and test of a preprototype vapor compression distillation water recovery subsystem are described. This subsystem, part of a larger regenerative life support evaluation system, is designed to recover usable water from urine, urinal rinse water, and concentrated shower and laundry brine collected from three space vehicle crewmen for a period of 180 days without resupply. Details of preliminary design and testing as well as component developments are included. Trade studies, considerations leading to concept selections, problems encountered, and test data are also presented. The rework of existing hardware, subsystem development including computer programs, assembly verification, and comprehensive baseline test results are discussed.

SUPIN: A Computational Tool for Supersonic Inlet Design

NASA Technical Reports Server (NTRS)

Slater, John W.

2016-01-01

A computational tool named SUPIN is being developed to design and analyze the aerodynamic performance of supersonic inlets. The inlet types available include the axisymmetric pitot, three-dimensional pitot, axisymmetric outward-turning, two-dimensional single-duct, two-dimensional bifurcated-duct, and streamline-traced inlets. The aerodynamic performance is characterized by the flow rates, total pressure recovery, and drag. The inlet flow-field is divided into parts to provide a framework for the geometry and aerodynamic modeling. Each part of the inlet is defined in terms of geometric factors. The low-fidelity aerodynamic analysis and design methods are based on analytic, empirical, and numerical methods which provide for quick design and analysis. SUPIN provides inlet geometry in the form of coordinates, surface angles, and cross-sectional areas. SUPIN can generate inlet surface grids and three-dimensional, structured volume grids for use with higher-fidelity computational fluid dynamics (CFD) analysis. Capabilities highlighted in this paper include the design and analysis of streamline-traced external-compression inlets, modeling of porous bleed, and the design and analysis of mixed-compression inlets. CFD analyses are used to verify the SUPIN results.

From conception to evaluation of mobile services for people with head injury: A participatory design perspective.

PubMed

Groussard, Pierre-Yves; Pigot, Hélène; Giroux, Sylvain

2018-07-01

Adults with cognitive impairments lack the means to organise their daily life, plan their appointments, cope with fatigue, and manage their budget. They manifest interest in using new technologies to be part of society. Unfortunately, the applications offered on smart phones are often beyond their cognitive abilities. The goal of this study was to design a mobile cognitive assistant to enhance autonomy of people living with acquired traumatic brain injury. Participatory design methodologies guided this research by involving adults with cognitive impairments (CI) and their caregivers in the early stages of the design process. The population of the study is composed of four male adults who present cognitive impairments (three with head injury and one with stroke) and three caregivers. The first phase of this research was to design the Services Assistance Mobile and Intelligent (SAMI) application based on the needs expressed by the participants. During three focus groups, needs emerged concerning planning, health monitoring and money management and led to the implementation of assistive solutions on an Android mobile phone. During the second phase, the participants evaluated the mobile assistant SAMI at home for eight weeks. The results demonstrate that the participants were able to participate actively in the conception of SAMI and to use it successfully. People with CI showed a slight improvement in their life satisfaction. Due to the small number of participants, these promising results need to be confirmed by a larger-scale study.

Combining the power of stories and the power of numbers: mixed methods research and mixed studies reviews.

PubMed

Pluye, Pierre; Hong, Quan Nha

2014-01-01

This article provides an overview of mixed methods research and mixed studies reviews. These two approaches are used to combine the strengths of quantitative and qualitative methods and to compensate for their respective limitations. This article is structured in three main parts. First, the epistemological background for mixed methods will be presented. Afterward, we present the main types of mixed methods research designs and techniques as well as guidance for planning, conducting, and appraising mixed methods research. In the last part, we describe the main types of mixed studies reviews and provide a tool kit and examples. Future research needs to offer guidance for assessing mixed methods research and reporting mixed studies reviews, among other challenges.

Marijuana: The Real Story. It's Your Choice!

ERIC Educational Resources Information Center

Stronck, David R.

This informational book on marijuana is part of a series of three interactive books on tobacco, alcohol, and marijuana; three informational books containing parallel content; and three teacher guides designed to give students in grades five through eight practice in using the information and skills presented in the books. The goal of this book and…

Tobacco: The Real Story. It's Your Choice.

ERIC Educational Resources Information Center

Stronck, David R.

This informational book on tobacco is part of a series of three interactive books on tobacco, alcohol, and marijuana; three informational books containing parallel content; and three teacher guides designed to give students in grades five through eight practice in using the information and skills presented in the books. The goal of this book and…

Shuttle to Space Station. Heart Assist Implant. Hubble Update. X-30 Mock-Up

NASA Technical Reports Server (NTRS)

1992-01-01

Shuttle to Space Station, Heart Assist Implant, Hubble Update, and X-30 Mockup are the four parts that are discussed in this video. The first part, Shuttle to Space Station, is focussed on the construction and function of the Space Station Freedom. While part two, Heart Assist Implant, discusses a newly developed electromechanical device that helps to reduce heart attack by using electric shocks. Interviews with the co-inventor and patients are also included. Brief introduction to Hubble Telescope, problem behind its poor image quality (mirror aberration), and the plan to correct this problem are the three issues that are discussed in part three, Hubble Update. The last part, part four, reviews the X-30 Mockup designed by the staff and students of Mississippi State University.

Turbomachine Sealing and Secondary Flows. Part 1; Review of Sealing Performance, Customer, Engine Designer, and Research Issues

NASA Technical Reports Server (NTRS)

Hendricks, R. C.; Steinetz, B. M.; Braun, M. J.

2004-01-01

Although forces outside our control shape our industry, turbomachine sealing research, design, and customer agendas established in 1978 by Ludwig, Campbell, and Smith in terms of specific fuel consumption and performance remain as objectives today. Advances have been made because failures of the space shuttle main engine turbomachinery ushered in a new understanding of sealing in high-power-density systems. Further, it has been shown that changes in sealing, especially for high-pressure rotors, dramatically change the performance of the entire engine or turbomachine. Maintaining seal leakages and secondary flows within engine design specifications remains the most efficient and cost effective way to enhance performance and minimize maintenance costs. This three-part review summarizes experiences, ideas, successes, and failures by NASA and the U.S. aerospace industry in secondary flow management in advanced turbomachinery. Part 1 presents system sealing, part 2 system rotordynamics, and part 3 modeling, with some overlap of each part.

Urban Watershed Forestry Manual Part 3: Urban Tree Planting Guide

Treesearch

Karen Cappiella; Tom Schueler; Tiffany Wright; Jennifer Tomlinson

2006-01-01

This is the third in a three-manual series on using trees to protect and restore urban watersheds. A brief description of each part follows. Part 3. Urban Tree Planting Guide provides detailed guidance on urban tree planting that is applicable at both the development site and the watershed scales. Topics covered include site assessment, planting design, site...

Eugene--a domain specific language for specifying and constraining synthetic biological parts, devices, and systems.

PubMed

Bilitchenko, Lesia; Liu, Adam; Cheung, Sherine; Weeding, Emma; Xia, Bing; Leguia, Mariana; Anderson, J Christopher; Densmore, Douglas

2011-04-29

Synthetic biological systems are currently created by an ad-hoc, iterative process of specification, design, and assembly. These systems would greatly benefit from a more formalized and rigorous specification of the desired system components as well as constraints on their composition. Therefore, the creation of robust and efficient design flows and tools is imperative. We present a human readable language (Eugene) that allows for the specification of synthetic biological designs based on biological parts, as well as provides a very expressive constraint system to drive the automatic creation of composite Parts (Devices) from a collection of individual Parts. We illustrate Eugene's capabilities in three different areas: Device specification, design space exploration, and assembly and simulation integration. These results highlight Eugene's ability to create combinatorial design spaces and prune these spaces for simulation or physical assembly. Eugene creates functional designs quickly and cost-effectively. Eugene is intended for forward engineering of DNA-based devices, and through its data types and execution semantics, reflects the desired abstraction hierarchy in synthetic biology. Eugene provides a powerful constraint system which can be used to drive the creation of new devices at runtime. It accomplishes all of this while being part of a larger tool chain which includes support for design, simulation, and physical device assembly.

Photogrammetric measurement to one part in a million

NASA Astrophysics Data System (ADS)

Fraser, Clive S.

1992-03-01

Industrial photogrammetric measurement to accuracies of 1 part in 1,000,000 of the size of the object is discussed. Network design concepts are reviewed, especially with regard both to the relationships between the first- and second-order design phases and to minimization of the influences of uncompensated systematic error. Photogrammetric system aspects are also briefly touched upon. The network optimization process for the measurement of a large compact range reflector is described and results of successive alignment surveys of this structure are summarized. These photogrammetric measurements yielded three dimensional (3D) coordinate accuracies surpassing one part in a million.

Extragalactic Astronomy: The Universe Beyond Our Galaxy.

ERIC Educational Resources Information Center

Jacobs, Kenneth Charles

This booklet is part of an American Astronomical Society curriculum project designed to provide teaching materials to teachers of secondary school chemistry, physics, and earth science. The material is presented in three parts: one section provides the fundamental content of extragalactic astronomy, another section discusses modern discoveries in…

Seeing beyond monitors-Critical care nurses' multiple skills in patient observation: Descriptive qualitative study.

PubMed

Alastalo, Mika; Salminen, Leena; Lakanmaa, Riitta-Liisa; Leino-Kilpi, Helena

2017-10-01

The aim of this study was to provide a comprehensive description of multiple skills in patient observation in critical care nursing. Data from semi-structured interviews were analysed using thematic analysis. Experienced critical care nurses (n=20) from three intensive care units in two university hospitals in Finland. Patient observation skills consist of: information gaining skills, information processing skills, decision-making skills and co-operation skills. The first three skills are integrated in the patient observation process, in which gaining information is a prerequisite for processing information that precedes making decisions. Co-operation has a special role as it occurs throughout the process. This study provided a comprehensive description of patient observation skills related to the three-phased patient observation process. The findings contribute to clarifying this part of the competence. The description of patient observation skills may be applied in both clinical practice and education as it may serve as a framework for orientation, ensuring clinical skills and designing learning environments. Based on this study, patient observation skills can be recommended to be included in critical care nursing education, orientation and as a part of critical care nurses' competence evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evaluation of a Composite Sandwich Fuselage Side Panel with Damage and Subjected to Internal Pressure

NASA Technical Reports Server (NTRS)

Rouse, Marshall; Ambur, Damodar R.; Bodine, Jerry; Dopker, Bernhard

1997-01-01

The results from an experimental and analytical study of a composite sandwich fuselage side panel for a transport aircraft are presented. The panel has two window cutouts and three frames, and has been evaluated with internal pressure loads that generate biaxial tension loading conditions. Design limit load and design ultimate load tests have been performed on the graphite-epoxy sandwich panel with the middle frame removed to demonstrate the suitability of this two-frame design for supporting the prescribed biaxial loading conditions with twice the initial frame spacing of 20 inches. The two-frame panel was damaged by cutting a notch that originates at the edge of a cutout and extends in the panel hoop direction through the window-belt area. This panel with a notch was tested in a combined-load condition to demonstrate the structural damage tolerance at the design limit load condition. The two panel configurations successfully satisfied all design load requirements in the experimental part of the study, and the three-frame and two-frame panel responses are fully explained by the analysis results. The results of this study suggest that there is potential for using sandwich structural concepts with greater than the usual 20-in.-wide frame spacing to further reduce aircraft fuselage structural weight.

Long-term/strategic scenario for reusable booster stages

NASA Astrophysics Data System (ADS)

Sippel, Martin; Manfletti, Chiara; Burkhardt, Holger

2006-02-01

This paper describes the final design status of a partially reusable space transportation system which has been under study for five years within the German future launcher technology research program ASTRA. It consists of dual booster stages, which are attached to an advanced expendable core. The design of the reference liquid fly-back boosters (LFBB) is focused on LOX/LH2 propellant and a future advanced gas-generator cycle rocket motor. The preliminary design study was performed in close cooperation between DLR and the German space industry. The paper's first part describes recent progress in the design of this reusable booster stage. The second part of the paper assesses a long-term, strategic scenario of the reusable stage's operation. The general idea is the gradual evolution of the above mentioned basic fly-back booster vehicle into three space transportation systems performing different tasks: Reusable First Stage for a small launcher application, successive development to a fully reusable TSTO, and booster for a super-heavy-lift rocket to support an ambitious space flight program like manned Mars missions. The assessment addresses questions of technical sanity, preliminary sizing and performance issues and, where applicable, examines alternative options.

Valorization of unauthorized sea disposal dredged sediments as a road foundation material.

PubMed

Achour, Raouf; Abriak, Nor-Edine; Zentar, Rachid; Rivard, Patrice; Gregoire, Pascal

2014-08-01

The main objective of this study is to show the ability of fine dredged material (mainly silty material) to be used in road construction project. This paper is divided into three parts. In the first part, the physical, the mineralogical and the mechanical characteristics of the used fine dredged sediments, as well as their chemical composition and environmental impacts are presented. In the second part, the methodology developed to design the road made from dredged fine sediment is developed. The third part of the paper focuses on the presentation of the road construction and the interpretation of analyses made on cores drilled samples from the road and measurements of the deflection of the road. The environmental assessment, based on leaching tests, is also performed at different issues.

Association Between National Board Dental Examination Part II Scores and Comprehensive Examinations at Harvard School of Dental Medicine.

PubMed

Lee, Min Kyeong; Allareddy, Veerasathpurush; Howell, T Howard; Karimbux, Nadeem Y

2011-01-01

Harvard School of Dental Medicine (HSDM) uses a hybrid problem-based approach to teaching in the predoctoral program. The objective structured clinical examination (OSCE) is a formative examination designed to assess the performance of students in the problem-based learning (PBL) curriculum. At HSDM three comprehensive examinations with OSCE components are administered during the third and fourth years of clinical training. The National Board Dental Examination (NBDE) Part II is taken in the final year of the predoctoral program. This study examines the association between the NBDE Part II and the comprehensive exams held at HSDM. Predoctoral students from the HSDM classes of 2005 and 2006 were included in this study. The outcome variable of interest was the scores obtained by students in the NBDE Part II, and the main independent variable of interest was the performance of students in the comprehensive exams (honors, pass, make-up exam to pass). The Mann-Whitney U-test was used to examine the association between the grades obtained in the each of the three comprehensive exams and the NBDE Part II scores. Multivariable linear regression analysis was also used to examine the association between the NBDE Part II scores and the comprehensive exam grades. The effect of potential confounding factors including age, sex, and race/ethnicity was adjusted. The results suggest that students who performed well in the comprehensive exams performed better on the NBDE Part II, even after adjusting for confounding factors. Future studies will examine the long-term impact of PBL on postdoctoral plans and career choices.

Physical Activity and Sedentary Time among Young Children in Full-Day Kindergarten: Comparing Traditional and Balanced Day Schedules

ERIC Educational Resources Information Center

Vanderloo, Leigh M.; Tucker, Patricia

2017-01-01

Objective: To compare physical activity and sedentary time among young children whose schools adhere to traditional (i.e. three outdoor playtimes = 70 minutes) versus balanced day (i.e. two outdoor playtimes = ~55 minutes) schedules in Ontario full-day kindergarten classrooms. Design: The project was part of a larger, 2-year cross-sectional study.…

Museum behind the Scenes--An Inquiry-Based Learning Unit with Biological Collections in the Classroom

ERIC Educational Resources Information Center

Kreuzer, Pia; Dreesmann, Daniel

2017-01-01

The aim of this study was to design and evaluate an inquiry- and activity-based learning unit for the classroom that uses biological collections to teach key evolutionary concepts and to support the understanding and appreciation of the work of a museum. The unit consisted of three parts that focused on the most important tasks of museums:…

The Role of Occupational Therapy in Promoting Playfulness, Parent Competence, and Social Participation in Early Childhood Playgroups: A Pretest Posttest Design

ERIC Educational Resources Information Center

Fabrizi, Sarah; Hubbell, Kristin

2017-01-01

This study examined the effects of an inclusive, community-based playgroup intervention on parent and child outcomes. The role of occupational therapy as part of a team of providers in early childhood was also explored. Caregiver-child dyads (n = 36) were enrolled in one of three playgroup conditions (control, occupational therapy support, and…

Taking One for the Team: Examining the Effects of Childhood Cancer on the Parental Subsystem-Part 2.

PubMed

Moules, Nancy J; Estefan, Andrew; McCaffrey, Graham; Tapp, Dianne M; Strother, Douglas

2016-11-01

In this Part 2 of a three-part research paper, we further our interpretations from our hermeneutic study examining how having a child who has experienced cancer had an impact on the relationship between the parents. In Part 1, we identified the focus of the study and provided background to the topic. We also described the research question, method, and design before offering an interpretive analysis of couples whose relationships survived, thrived, or demised. In this article, we extend the interpretations under an overarching theme of "taking one for the team." Here, we discuss issues of changes in focus and roles, and the notions of tag teaming, protection, intimacy, and grieving. We examine the phenomenon of putting relationships on hold, then finding reclamation later. In Part 3, we offer implications of these findings for other parents in similar situations and for health care professionals working with these families. © The Author(s) 2016.

Evaluation of ConPrim: A three-part model for continuing education in primary health care.

PubMed

Berggren, Erika; Strang, Peter; Orrevall, Ylva; Ödlund Olin, Ann; Sandelowsky, Hanna; Törnkvist, Lena

2016-11-01

To overcome the gap between existing knowledge and the application of this knowledge in practice, a three-part continuing educational model for primary health care professionals (ConPrim) was developed. It includes a web-based program, a practical exercise and a case seminar. To evaluate professionals' perceptions of the design, pedagogy and adaptation to primary health care of the ConPrim continuing educational model as applied in a subject-specific intervention. A total of 67 professionals (nurses and physicians) completed a computer-based questionnaire evaluating the model's design, pedagogy and adaptation to primary health care one week after the intervention. Descriptive statistics were used. Over 90% found the design of the web-based program and case seminar attractive; 86% found the design of the practical exercise attractive. The professionals agreed that the time spent on two of the three parts was acceptable. The exception was the practical exercise: 32% did not fully agree. Approximately 90% agreed that the contents of all parts were relevant to their work and promoted interactive and interprofessional learning. In response to the statements about the intervention as whole, approximately 90% agreed that the intervention was suitable to primary health care, that it had increased their competence in the subject area, and that they would be able to use what they had learned in their work. ConPrim is a promising model for continuing educational interventions in primary health care. However, the time spent on the practical exercise should be adjusted and the instructions for the exercise clarified. ConPrim should be tested in other subject-specific interventions and its influence on clinical practice should be evaluated. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

One Approach to the Synthesis, Design and Manufacture of Hyperboloid Gear Sets with Face Mating Gears. Part 2: Review of Practical Realization

NASA Astrophysics Data System (ADS)

Abadjiev, Valentin; Abadjieva, Emilia

2016-09-01

Hyperboloid gear drives with face mating gears are used to transform rotations between shafts with non-parallel and non-intersecting axes. A special case of these transmissions are Spiroid1 and Helicon gear drives. The classical gear drives of this type are Archimedean ones. The objective of this study are hyperboloid gear drives with face meshing, when the pinion has threads of conic convolute, Archimedean and involute types, or the pinion has threads of cylindrical convolute, Archimedean and involute types. For simplicity, all three type transmissions with face mating gears and a conic pinion are titled Spiroid and all three type trans- missions with face mating gears and a cylindrical pinion are titled Helicon. Principles of the mathematical modelling of tooth contact synthesis are discussed in Part 1: Basic theoretical and CAD experience of this study. The second part of this article is a brief overview of the innovations and inventions created in this field at the Institute of Mechanics - Bulgarian Academy of Sciences in the last three decades. This study is also dedicated on elaboration of the specialized face gear sets for implementation into bio-robot hand. It is based on the application of 3D software technology, using 3D print for the realization of the physical models of the gear drives.

An Electronics Course Emphasizing Circuit Design

ERIC Educational Resources Information Center

Bergeson, Haven E.

1975-01-01

Describes a one-quarter introductory electronics course in which the students use a variety of inexpensive integrated circuits to design and construct a large number of useful circuits. Presents the subject matter of the course in three parts: linear circuits, digital circuits, and more complex circuits. (GS)

The Virtual Learning Organization: Learning at the Corporate University Workplace Campus.

ERIC Educational Resources Information Center

Prestoungrange, Gordon, Ed.; Sandelands, Eric, Ed.; Teare, Richard, Ed.

This three-part book contains 17 chapters that seek to explore and establish the framework around which global organizations might embed their own corporate virtual university. Part 1: Design Issues, contains the following chapters: "Customer Orientation and Motivation: The Key to Effective Learning Organizations" (Gordon…

Accident Report: Pupils -- Employees, School Jurisdiction, 1972-1973.

ERIC Educational Resources Information Center

O'Hara, James M., Comp.; Conklin, Robert L., Comp.

This report is intended to provide principals, department heads, teachers, and parents with specific information designed to assist them in isolating unsafe conditions, activities, and behavioral problems. The document is divided into three parts: (1) a pupil section, with tables showing where accidents occurred, what parts of the body were…

Idaho's Blueprint for Early Learning: "The Essential Elements."

ERIC Educational Resources Information Center

Wheeler, Myrl, Ed.

Designed to provide information related to quality early care and education services for providers, policy makers, and clients in Idaho, This "blueprint" outlines the nine essential elements for best practices in early care and education settings. The document is presented in three parts. Part 1 delineates standards and indicators in…

Environmental Education about the Rain Forest.

ERIC Educational Resources Information Center

Berkmuller, Klaus

Designed to help in the development of an educational program about the value of rain forests, this handbook presents a condensation of issues, facts, and concepts. The handbook is divided into three parts. Part one introduces the rain forest ecosystem and provides conceptual background material needed in the determination of problems, the…

First Course in Japanese: Character Workbook.

ERIC Educational Resources Information Center

Niwa, Tamako

This character workbook is an introduction to Japanese writing designed to be used in conjunction with Parts One and Two of this introductory course in Japanese. All the "hiragana", several "katakana", and 88 Japanese characters are introduced in this text. The workbook, consisting of 30 lessons, is divided into three parts.…

Materials experiment carrier concepts definition study. Volume 3: Programmatics, part 2

NASA Technical Reports Server (NTRS)

1981-01-01

Project logic, schedule and funding information was derived to enable decisions to be made regarding implementation of MEC system development. A master schedule and cost and price estimates (ROM) were developed for a project that consists of development of an all-up MEC, its integration with payloads and its flight on one 90 day mission. In Part 2 of the study a simple initial MEC was defined to accommodate three MPS baseline payloads. The design of this initial MEC is illustrated. The project logic, detailed schedules, and ROM cost estimate relate to a project in which this initial MEC is developed, integrated with payloads and flown once for 180 days.

Disadvantaged Children and Their First School Experiences. ETS-Head Start Longitudinal Study: Preliminary Description of the Initial Sample Prior to School Enrollment. A Report in Two Volumes: Volume 2--Tables.

ERIC Educational Resources Information Center

Educational Testing Service, Princeton, NJ.

As part of its 6-year longitudinal study designed to assess the impact of Head Start, Educational Testing Service (ETS) has summarized and compiled tables of data collected on 16 of the 33 instruments administered to children in 1969 in three sites (St. Louis, Missouri; Trenton, New Jersey; and Portland, Oregon). Data from the parent interview and…

The Crystal Hole.

ERIC Educational Resources Information Center

Law, Maxine S.

1980-01-01

Presented are three curriculum sequences about windows that were designed as part of an architectural education course for junior high school students in Ohio. The three units, or "encounters," deal with stained glass, styles of windows, and functions of the window. Each includes student objectives and selected activities. (SJL)

Optimization of extraction parameters of pentacyclic triterpenoids from Swertia chirata stem using response surface methodology.

PubMed

Pandey, Devendra Kumar; Kaur, Prabhjot

2018-03-01

In the present investigation, pentacyclic triterpenoids were extracted from different parts of Swertia chirata by solid-liquid reflux extraction methods. The total pentacyclic triterpenoids (UA, OA, and BA) in extracted samples were determined by HPTLC method. Preliminary studies showed that stem part contains the maximum pentacyclic triterpenoid and was chosen for further studies. Response surface methodology (RSM) has been employed successfully by solid-liquid reflux extraction methods for the optimization of different extraction variables viz., temperature ( X 1 35-70 °C), extraction time ( X 2 30-60 min), solvent composition ( X 3 20-80%), solvent-to-solid ratio ( X 4 30-60 mlg -1 ), and particle size ( X 5 3-6 mm) on maximum recovery of triterpenoid from stem parts of Swertia chirata . A Plackett-Burman design has been used initially to screen out the three extraction factors viz., particle size, temperature, and solvent composition on yield of triterpenoid. Moreover, central composite design (CCD) was implemented to optimize the significant extraction parameters for maximum triterpenoid yield. Three extraction parameters viz., mean particle size (3 mm), temperature (65 °C), and methanol-ethyl acetate solvent composition (45%) can be considered as significant for the better yield of triterpenoid A second-order polynomial model satisfactorily fitted the experimental data with the R 2 values of 0.98 for the triterpenoid yield ( p  < 0.001), implying good agreement between the experimental triterpenoid yield (3.71%) to the predicted value (3.79%).

A Planetary System Exploration Project for Introductory Astronomy and Astrobiology Courses

NASA Astrophysics Data System (ADS)

Rees, Richard F.

2015-01-01

I have created three-part projects for the introductory astronomy and astrobiology courses at Westfield State University which simulate the exploration of a fictional planetary system. The introductory astronomy project is an initial reconnaissance of the system by a robotic spacecraft, culminating in close flybys of two or three planets. The astrobiology project is a follow-up mission concluding with the landing of a roving lander on a planet or moon. Student responses in earlier parts of each project can be used to determine which planets are targeted for closer study in later parts. Highly realistic views of the planets from space and from their surfaces can be created using programs such as Celestia and Terragen; images and video returned by the spacecraft are thus a highlight of the project. Although designed around the particular needs and mechanics of the introductory astronomy and astrobiology courses for non-majors at WSU, these projects could be adapted for use in courses at many different levels.

An Examination of the Four-Part Theory of the Chinese Self: The Differentiation and Relative Importance of the Different Types of Social-Oriented Self

PubMed Central

Sun, Chien-Ru

2017-01-01

Because culture has a deep and far-reaching influence, individuals who grew up within different cultures tend to develop different basic self-constructions. With respect to the Chinese under the influence of Chinese culture, Yang proposed the concepts of individual-oriented self and social-oriented self. He argued that, besides the individual-oriented self, the social-oriented self of the Chinese contains three types of self: the relationship-oriented self, the familistic (group)-oriented self, and the other-oriented self. The theory proposed that the Chinese self is appropriately covered only through this four-part theory of the Chinese self. However, this remains to be tested; whether these three types of sub-level “selves” can be effectively triggered, along with their relative importance. This study examines the four-part theory of the Chinese self. Through photo priming, Experiment 1 shows that the three types of social-oriented self are differentiated from each other and can be individually triggered. In Experiment 2, the importance of the three types of self was investigated, adopting the concept of limited self-regulation resources to design scenarios. The participants were asked to make counterarguments about the notion of each of the three types of self, with performance in the subsequent task serving as the main dependent variable. In Experiment 3, the relative importance of the three types of self was examined by investigating the choices made by individuals within the context of conflict under the three orientations of the social-oriented self. Overall, results of the experiments showed that the Chinese have a four-part self with the importance of the other-oriented self as the most remarkable. PMID:28713310

[A computer aided design approach of all-ceramics abutment for maxilla central incisor].

PubMed

Sun, Yu-chun; Zhao, Yi-jiao; Wang, Yong; Han, Jing-yun; Lin, Ye; Lü, Pei-jun

2010-10-01

To establish the computer aided design (CAD) software platform of individualized abutment for the maxilla central incisor. Three-dimentional data of the incisor was collected by scanning and geometric transformation. Data mainly included the occlusal part of the healing abutment, the location carinae of the bedpiece, the occlusal 1/3 part of the artificial gingiva's inner surface, and so on. The all-ceramic crown designed in advanced was "virtual cutback" to get the original data of the abutment's supragingival part. The abutment's in-gum part was designed to simulate the individual natural tooth root. The functions such as "data offset", "bi-rail sweep surface" and "loft surface" were used in the process of CAD. The CAD route of the individualized all-ceramic abutment was set up. The functions and application methods were decided and the complete CAD process was realized. The software platform was basically set up according to the requests of the dental clinic.

Study of aircraft crashworthiness for fire protection

NASA Technical Reports Server (NTRS)

Cominsky, A.

1981-01-01

Impact-survivable postcrash fire accidents were surveyed. The data base developed includes foreign and domestic accidents involving airlines and jet aircraft. The emphasis was placed on domestic accidents, airlines, and jet aircraft due principally to availability of information. Only transport category aircraft in commercial service designed under FAR Part 25 were considered. A matrix was prepared to show the relationships between the accident characteristics and the fire fatalities. Typical postcrash fire scenaries were identified. Safety concepts were developed for three engineering categories: cabin interiors - cabin subsystems; power plant - engines and fuel systems; and structural mechanics - primary and secondary structures. The parameters identified for concept evaluation are cost, effectiveness, and societal concerns. Three concepts were selected for design definition and cost and effectiveness analysis: improved fire-resistant seat materials; anti-misting kerosene; and additional cabin emergency exits.

A method for the design of transonic flexible wings

NASA Technical Reports Server (NTRS)

Smith, Leigh Ann; Campbell, Richard L.

1990-01-01

Methodology was developed for designing airfoils and wings at transonic speeds which includes a technique that can account for static aeroelastic deflections. This procedure is capable of designing either supercritical or more conventional airfoil sections. Methods for including viscous effects are also illustrated and are shown to give accurate results. The methodology developed is an interactive system containing three major parts. A design module was developed which modifies airfoil sections to achieve a desired pressure distribution. This design module works in conjunction with an aerodynamic analysis module, which for this study is a small perturbation transonic flow code. Additionally, an aeroelastic module is included which determines the wing deformation due to the calculated aerodynamic loads. Because of the modular nature of the method, it can be easily coupled with any aerodynamic analysis code.

Exoskeletal Engine Concept: Feasibility Studies for Medium and Small Thrust Engines

NASA Technical Reports Server (NTRS)

Halliwell, Ian

2001-01-01

The exoskeletal engine concept is one in which the shafts and disks are eliminated and are replaced by rotating casings that support the blades in spanwise compression. Omission of the shafts and disks leads to an open channel at the engine centerline. This has immense potential for reduced jet noise and for the accomodation of an alternative form of thruster for use in a combined cycle. The use of ceramic composite materials has the potential for significantly reduced weight as well as higher working temperatures without cooling air. The exoskeletal configuration is also a natural stepping-stone to complete counter-rotating turbomachinery. Ultimately this will lead to reductions in weight, length, parts count and improved efficiency. The feasibility studies are in three parts. Part I-Systems and Component Requirements addressed the mechanical aspects of components from a functionality perspective. This effort laid the groundwork for preliminary design studies. Although important, it is not felt to be particularly original, and has therefore not been included in the current overview. Part 2-Preliminary Design Studies turned to some of the cycle and performance issues inherent in an exoskeletal configuration and some initial attempts at preliminary design of turbomachinery were described. Twin-spoon and single-spool 25.800-lbf-thrust turbofans were used as reference vehicles in a mid-size commercial subsonic category in addition to a single-spool 5,000-lbf-thrust turbofan that represented a general aviation application. The exoskeletal engine, with its open centerline, has tremendous potential for noise suppression and some preliminary analysis was done which began to quantify the benefits. Part 3-Additional Preliminary Design Studies revisited the design of single-spool 25,800-lbf-thrust turbofan configurations, but in addition to the original FPR = 1.6 and BPR = 5.1 reference engine, two additional configurations used FPR = 2.4 and BPR = 3.0 and FPR = 3.2 and BPR = 2.0 were investigated. The single-spool 5,000-lbf-thrust turbofan was refined and the small engine study was extended to include a 2,000-lbf-thrust turbojet. More attention was paid to optimizing the turbomachinery. Turbine cooling flows were eliminated, in keeping with the use of uncooled CMC material in exoskeletal engines. The turbine performance parameters moved much closer to the nominal target values, demonstrating the great benefits to the cycle of uncooled turbines.

Exoskeletal Engine Concept: Feasibility Studies for Medium and Small Thrust Engines

NASA Technical Reports Server (NTRS)

Halliwell, Ian

2001-01-01

The exoskeletal engine concept is one in which the shafts and disks are eliminated and are replaced by rotating casings that support the blades in spanwise compression. Omission of the shafts and disks leads to an open channel at the engine centerline. This has immense potential for reduced jet noise and for the accommodation of an alternative form of thruster for use in a combined cycle. The use of ceramic composite materials has the potential for significantly reduced weight as well as higher working temperatures without cooling air. The exoskeletal configuration is also a natural stepping-stone to complete counter-rotating turbomachinery. Ultimately this will lead to reductions in weight, length, parts count and improved efficiency. The feasibility studies are in three parts. Part 1: Systems and Component Requirements addressed the mechanical aspects of components from a functionality perspective. This effort laid the groundwork for preliminary design studies. Although important, it is not felt to be particularly original, and has therefore not been included in the current overview. Part 2: Preliminary Design Studies turned to some of the cycle and performance issues inherent in an exoskeletal configuration and some initial attempts at preliminary design of turbomachinery were described. Twin-spoon and single-spool 25,800-lbf-thrust turbofans were used as reference vehicles in a mid-size commercial subsonic category in addition to a single-spool 5,000-lbf-thrust turbofan that represented a general aviation application. The exoskeletal engine, with its open centerline, has tremendous potential for noise suppression and some preliminary analysis was done which began to quantify the benefits. Part 3: Additional Preliminary Design Studies revisited the design of single-spool 25,800-lbf-thrust turbofan configurations, but in addition to the original FPR = 1.6 and BPR = 5.1 reference engine. two additional configurations used FPR = 2.4 and BPR = 3.0 and FPR = 3.2 and BPR = 2.0 were investigated. The single-spool 5.000-lbf-thrust turbofan was refined and the small engine study was extended to include a 2,000-lbf-thrust turbojet. More attention was paid to optimizing the turbomachinery. Turbine cooling flows were eliminated, in keeping with the use of uncooled CMC materials in exoskeletal engines. The turbine performance parameters moved much closer to the nominal target values, demonstrating the great benefits to the cycle of uncooled turbines.

Space transfer vehicle concepts and requirements study, phase 2

NASA Technical Reports Server (NTRS)

Cannon, Jeffrey H.; Vinopal, Tim; Andrews, Dana; Richards, Bill; Weber, Gary; Paddock, Greg; Maricich, Peter; Bouton, Bruce; Hagen, Jim; Kolesar, Richard

1992-01-01

This final report is a compilation of the Phase 1 and Phase 2 study findings and is intended as a Space Transfer Vehicle (STV) 'users guide' rather than an exhaustive explanation of STV design details. It provides a database for design choices in the general areas of basing, reusability, propulsion, and staging; with selection criteria based on cost, performance, available infrastructure, risk, and technology. The report is organized into the following three parts: (1) design guide; (2) STV Phase 1 Concepts and Requirements Study Summary; and (3) STV Phase 2 Concepts and Requirements Study Summary. The overall objectives of the STV study were to: (1) define preferred STV concepts capable of accommodating future exploration missions in a cost-effective manner; (2) determine the level of technology development required to perform these missions in the most cost effective manner; and (3) develop a decision database of programmatic approaches for the development of an STV concept.

Collaboration between Industrial Designers and Design Engineers - Comparing the Understanding of Design Intent.

PubMed

Laursen, Esben Skov; Møller, Louise

2015-01-01

This paper describes a case study comparing the understanding of design intent between industrial designers and design engineers. The study is based on the hypothesis that it is not all aspects of the design intent that are equally difficult to share between industrial designers and design engineers in the product development process. The study builds on five semi-structured interviews, where two industrial designers and three design engineers were interviewed about different aspects of the design intent. Based on our results, there seem to be indications that the more complex and abstract elements of industrial design knowledge such as the meaning, semantics, values, emotions and social aspects of the product are less shared by the design engineers. Moreover, the results also indicate that the different aspects of the design intent are perceived separately, rather than as part of a whole by the design engineers. The connection between the different aspects of the design intent is not shared between the industrial designer and design engineer making the shared knowledge less meaningful to the design engineers. The results of this study cannot be claimed to be conclusive due to the limited empirical material. Further investigation and analytically richer data are required in order to verify and broaden the findings. More case studies have therefore been planned in order to understand the area better.

Liquid Rocket Booster (LRB) for the Space Transportation System (STS) systems study, volume 2

NASA Technical Reports Server (NTRS)

1989-01-01

The Liquid Rocket Booster (LRB) Systems Definition Handbook presents the analyses and design data developed during the study. The Systems Definition Handbook (SDH) contains three major parts: the LRB vehicles definition; the Pressure-Fed Booster Test Bed (PFBTB) study results; and the ALS/LRB study results. Included in this volume are the results of all trade studies; final configurations with supporting rationale and analyses; technology assessments; long lead requirements for facilities, materials, components, and subsystems; operational requirements and scenarios; and safety, reliability, and environmental analyses.

The Importance of Play: Part Three

ERIC Educational Resources Information Center

Exceptional Parent, 2009

2009-01-01

Several membership companies of the International Playground Equipment Manufacturers Association (IPEMA) are helping differently-abled children to have access to play equipment and opportunities. These IPEMA membership companies, and others, are driven by the principles of Universal Design (UD), a new concept in playground design that helps ensure…

Prototype design based on NX subdivision modeling application

NASA Astrophysics Data System (ADS)

Zhan, Xianghui; Li, Xiaoda

2018-04-01

Prototype design is an important part of the product design, through a quick and easy way to draw a three-dimensional product prototype. Combined with the actual production, the prototype could be modified several times, resulting in a highly efficient and reasonable design before the formal design. Subdivision modeling is a common method of modeling product prototypes. Through Subdivision modeling, people can in a short time with a simple operation to get the product prototype of the three-dimensional model. This paper discusses the operation method of Subdivision modeling for geometry. Take a vacuum cleaner as an example, the NX Subdivision modeling functions are applied. Finally, the development of Subdivision modeling is forecasted.

Surface Finish Effects Using Coating Method on 3D Printing (FDM) Parts

NASA Astrophysics Data System (ADS)

Haidiezul, AHM; Aiman, AF; Bakar, B.

2018-03-01

One of three-dimensional (3-D) printing economical processes is by using Fused Deposition Modelling (FDM). The 3-D printed object was built using layer-by-layer approach which caused “stair stepping” effects. This situation leads to uneven surface finish which mostly affect the objects appearance for product designers in presenting their models or prototypes. The objective of this paper is to examine the surface finish effects from the application of XTC-3D coating developed by Smooth-On, USA on the 3D printed parts. From the experimental works, this study shows the application of XTC-3D coating to the 3-D printed parts has improve the surface finish by reducing the gap between the layer

To Design or Not to Design (Part Three): Metacognition: How Problematizing Transforms a Complex System towards a Desired State

DTIC Science & Technology

2011-03-18

problematization‟s place in the entrepreneurial situation. In contrast to FM5-0 Chapter 3 Design‟s confusing graphic on design, this one conveys meaning and...system transformation graphic that, although designed for entrepreneurial application, shares many overlapping contextual features that military design...doctrine attempts. Most significantly, they bound their entrepreneurial situation around the entire system in a manner that correlates to an

Student as Disciple.

ERIC Educational Resources Information Center

National Catholic Educational Association, Washington, DC.

This kit, the third publication in a five-part series on the educational "ministry," offers elements designed for Catholic school faculty, parents, and students. The kit contains an article on the nature of discipleship; a booklet with prayer services, scripture references, liturgies, and sacramental preparation; three prayer cards; three posters;…

Marketing Farm Grain Crops.

ERIC Educational Resources Information Center

Ridenour, Harlan E.

This vocational agriculture curriculum on grain marketing contains three parts: teacher guide, student manual, and student workbook. All three are coordinated and cross-referenced. The course is designed to give students of grain marketing a thorough background in the subject and provide practical help in developing grain marketing strategies for…

Towards Subject-Specific Strength Training Design through Predictive Use of Musculoskeletal Models.

PubMed

Plüss, Michael; Schellenberg, Florian; Taylor, William R; Lorenzetti, Silvio

2018-01-01

Lower extremity dysfunction is often associated with hip muscle strength deficiencies. Detailed knowledge of the muscle forces generated in the hip under specific external loading conditions enables specific structures to be trained. The aim of this study was to find the most effective movement type and loading direction to enable the training of specific parts of the hip muscles using a standing posture and a pulley system. In a novel approach to release the predictive power of musculoskeletal modelling techniques based on inverse dynamics, flexion/extension and ab-/adduction movements were virtually created. To demonstrate the effectiveness of this approach, three hip orientations and an external loading force that was systematically rotated around the body were simulated using a state-of-the art OpenSim model in order to establish ideal designs for training of the anterior and posterior parts of the M. gluteus medius (GM). The external force direction as well as the hip orientation greatly influenced the muscle forces in the different parts of the GM. No setting was found for simultaneous training of the anterior and posterior parts with a muscle force higher than 50% of the maximum. Importantly, this study has demonstrated the use of musculoskeletal models as an approach to predict muscle force variations for different strength and rehabilitation exercise variations.

Towards Subject-Specific Strength Training Design through Predictive Use of Musculoskeletal Models

PubMed Central

Plüss, Michael; Schellenberg, Florian

2018-01-01

Lower extremity dysfunction is often associated with hip muscle strength deficiencies. Detailed knowledge of the muscle forces generated in the hip under specific external loading conditions enables specific structures to be trained. The aim of this study was to find the most effective movement type and loading direction to enable the training of specific parts of the hip muscles using a standing posture and a pulley system. In a novel approach to release the predictive power of musculoskeletal modelling techniques based on inverse dynamics, flexion/extension and ab-/adduction movements were virtually created. To demonstrate the effectiveness of this approach, three hip orientations and an external loading force that was systematically rotated around the body were simulated using a state-of-the art OpenSim model in order to establish ideal designs for training of the anterior and posterior parts of the M. gluteus medius (GM). The external force direction as well as the hip orientation greatly influenced the muscle forces in the different parts of the GM. No setting was found for simultaneous training of the anterior and posterior parts with a muscle force higher than 50% of the maximum. Importantly, this study has demonstrated the use of musculoskeletal models as an approach to predict muscle force variations for different strength and rehabilitation exercise variations. PMID:29796082

Assessing older adults' perceptions of sensor data and designing visual displays for ambient environments. An exploratory study.

PubMed

Reeder, B; Chung, J; Le, T; Thompson, H; Demiris, G

2014-01-01

This article is part of the Focus Theme of Methods of Information in Medicine on "Using Data from Ambient Assisted Living and Smart Homes in Electronic Health Records". Our objectives were to: 1) characterize older adult participants' perceived usefulness of in-home sensor data and 2) develop novel visual displays for sensor data from Ambient Assisted Living environments that can become part of electronic health records. Semi-structured interviews were conducted with community-dwelling older adult participants during three and six-month visits. We engaged participants in two design iterations by soliciting feedback about display types and visual displays of simulated data related to a fall scenario. Interview transcripts were analyzed to identify themes related to perceived usefulness of sensor data. Thematic analysis identified three themes: perceived usefulness of sensor data for managing health; factors that affect perceived usefulness of sensor data and; perceived usefulness of visual displays. Visual displays were cited as potentially useful for family members and health care providers. Three novel visual displays were created based on interview results, design guidelines derived from prior AAL research, and principles of graphic design theory. Participants identified potential uses of personal activity data for monitoring health status and capturing early signs of illness. One area for future research is to determine how visual displays of AAL data might be utilized to connect family members and health care providers through shared understanding of activity levels versus a more simplified view of self-management. Connecting informal and formal caregiving networks may facilitate better communication between older adults, family members and health care providers for shared decision-making.

Progress on the Construction of the Perpendicularly Biased 2nd Harmonic Cavity for the Fermilab Booster

DOE Office of Scientific and Technical Information (OSTI.GOV)

Madrak, R.; Dey, J.; Duel, K.

A perpendicularly biased tuneable 2nd harmonic cavity, designed for the Fermilab Booster, is being assembled for testing this summer (2018). The cavity will work at twice the frequency of the fundamental cavities, and will be on only during the injection and transition (or extraction) periods. The main reason for adding this cavity is to improve beam capture and reduce losses as required by Fermilab's Proton Improvement Plan (PIP). After three years optimization and study, the cavity design has now been finalized and all constituent parts have been received. We report on the cavity final design and on the status ofmore » the construction.« less

Rational design of class I MHC ligands

NASA Astrophysics Data System (ADS)

Rognan, D.; Scapozza, L.; Folkers, G.; Daser, Angelika

1995-04-01

From the knowledge of the three-dimensional structure of a class I MHC protein, several non natural peptides were designed in order to either optimize the interactions of one secondary anchor amino acid with its HLA binding pocket or to substitute the non interacting part with spacer residues. All peptides were synthesized and tested for binding to the class I MHC protein in an in vitro reconstitution assay. As predicted, the non natural peptides present an enhanced binding to the HLA-B27 molecule with respect to their natural parent peptides. This study constitutes the first step towards the rational design of non peptidic MHC ligands that should be very promising tools for the selective immunotherapy of autoimmune diseases.

Summary and evaluation of the conceptual design study of a potential early commercial MHD power plant (CSPEC)

NASA Technical Reports Server (NTRS)

Staiger, P. J.; Penko, P. F.

1982-01-01

The conceptual design study of a potential early commercial MHD power plant (CSPEC) is described and the results are summarized. Each of two contractors did a conceptual design of an approximtely 1000 MWe open-cycle MHD/steam plant with oxygen enriched combustion air preheated to an intermediate temperatue in a metallic heat exchanger. The contractors were close in their overall plant efficiency estimates but differed in their capital cost and cost of electricity estimates, primarily because of differences in balance-of-plant material, contingency, and operating and maintenance cost estimates. One contractor concluded that its MHD plant design compared favorably in cost of electricity with conventional coal-fired steam plants. The other contractor is making such a comparison as part of a follow-on study. Each contractor did a preliminary investigation of part-load performance and plant availability. The results of NASA studies investigating the effect of plant size and oxidizer preheat temperature on the performance of CSPEC-type MHD plants are also described. The efficiency of a 1000 MWe plant is about three points higher than of a 200 MWe plant. Preheating to 1600 F gives an efficiency about one and one-half points higher than preheating to 800 F for all plant sizes. For each plant size and preheat temperature there is an oxidizer enrichment level and MHD generator length that gives the highest plant efficiency.

Preplanting Treatments and Natural Invasion of Tree Species Onto Former Agricultural Fields at the Tensas River National Wildlife Refuge, Louisiana

Treesearch

John W. McCoy; Bobby D. Keeland; Brian Roy Lockhart; Thomas Dean

2002-01-01

As part of a study of oak planting techniques for bottomland hardwood afforestation we examined the natural invasion of woody species onto former agricultural fields at Tensas River National Wildlife Refuge. Three replications of 14 treatments were established as 0.4 hectare (1 acre) plots in a complete randomized block design. Combinations of these treatments were...

Developing a Website Directory for Young People: A Case Study Using Graduate Students in Library and Information Science

ERIC Educational Resources Information Center

Irwin, Enid; Haycock, Ken

2008-01-01

KidsClick! is a web-based instructional resource designed for K-12. In 2006 it was transferred to the San Jose State School of Library and Information Science, and was subsequently refocused for grades 4-9, ages 10-14, post-reading, and pre-adult reading level phases. This article describes three parts of the redesign project--content, interface,…

Cost-Driven Design of a Large Scale X-Plane

NASA Technical Reports Server (NTRS)

Welstead, Jason R.; Frederic, Peter C.; Frederick, Michael A.; Jacobson, Steven R.; Berton, Jeffrey J.

2017-01-01

A conceptual design process focused on the development of a low-cost, large scale X-plane was developed as part of an internal research and development effort. One of the concepts considered for this process was the double-bubble configuration recently developed as an advanced single-aisle class commercial transport similar in size to a Boeing 737-800 or Airbus A320. The study objective was to reduce the contractor cost from contract award to first test flight to less than $100 million, and having the first flight within three years of contract award. Methods and strategies for reduced cost are discussed.

Eugene – A Domain Specific Language for Specifying and Constraining Synthetic Biological Parts, Devices, and Systems

PubMed Central

Bilitchenko, Lesia; Liu, Adam; Cheung, Sherine; Weeding, Emma; Xia, Bing; Leguia, Mariana; Anderson, J. Christopher; Densmore, Douglas

2011-01-01

Background Synthetic biological systems are currently created by an ad-hoc, iterative process of specification, design, and assembly. These systems would greatly benefit from a more formalized and rigorous specification of the desired system components as well as constraints on their composition. Therefore, the creation of robust and efficient design flows and tools is imperative. We present a human readable language (Eugene) that allows for the specification of synthetic biological designs based on biological parts, as well as provides a very expressive constraint system to drive the automatic creation of composite Parts (Devices) from a collection of individual Parts. Results We illustrate Eugene's capabilities in three different areas: Device specification, design space exploration, and assembly and simulation integration. These results highlight Eugene's ability to create combinatorial design spaces and prune these spaces for simulation or physical assembly. Eugene creates functional designs quickly and cost-effectively. Conclusions Eugene is intended for forward engineering of DNA-based devices, and through its data types and execution semantics, reflects the desired abstraction hierarchy in synthetic biology. Eugene provides a powerful constraint system which can be used to drive the creation of new devices at runtime. It accomplishes all of this while being part of a larger tool chain which includes support for design, simulation, and physical device assembly. PMID:21559524

Fabrication of Flex Joint Utilizing Additively Manufactured Parts

NASA Technical Reports Server (NTRS)

Eddleman, David; Richard, Jim

2015-01-01

The Selective Laser Melting (SLM) manufacturing technique has been utilized in the manufacture of a flex joint typical of those found in rocket engine and main propulsion system ducting. The SLM process allowed for the combination of parts that are typically machined separately and welded together. This resulted in roughly a 65% reduction of the total number of parts, roughly 70% reduction in the total number of welds, and an estimated 60% reduction in the number of machining operations. The majority of the new design was in three SLM pieces. These pieces, as well as a few traditionally fabricated parts, were assembled into a complete unit, which has been pressure tested. The design and planned cryogenic testing of the unit will be presented.

Design study of electron cyclotron resonance-ion plasma accelerator for heavy ion cancer therapy.

PubMed

Inoue, T; Hattori, T; Sugimoto, S; Sasai, K

2014-02-01

Electron Cyclotron Resonance-Ion Plasma Accelerator (ECR-IPAC) device, which theoretically can accelerate multiple charged ions to several hundred MeV with short acceleration length, has been proposed. The acceleration mechanism is based on the combination of two physical principles, plasma electron ion adiabatic ejection (PLEIADE) and Gyromagnetic Autoresonance (GYRAC). In this study, we have designed the proof of principle machine ECR-IPAC device and simulated the electromagnetic field distribution generating in the resonance cavity. ECR-IPAC device consisted of three parts, ECR ion source section, GYRAC section, and PLEIADE section. ECR ion source section and PLEIADE section were designed using several multi-turn solenoid coils and sextupole magnets, and GYRAC section was designed using 10 turns coil. The structure of ECR-IPAC device was the cylindrical shape, and the total length was 1024 mm and the maximum diameter was 580 mm. The magnetic field distribution, which maintains the stable acceleration of plasma, was generated on the acceleration center axis throughout three sections. In addition, the electric field for efficient acceleration of electrons was generated in the resonance cavity by supplying microwave of 2.45 GHz.

Iranian Nurses' Attitudes and Perception towards Patient Advocacy.

PubMed

Motamed-Jahromi, Mohadeseh; Abbaszadeh, Abbas; Borhani, Fariba; Zaher, Homa

2012-01-01

Patient advocacy is an inherent component of professional nursing ethics; in other words, nurses' enough knowledge would be essential to gain a positive attitude towards nursing advocacy. Using a descriptive-analytic design, this study aimed to assess the correlation between nurses' perception and attitudes towards patient advocacy, amongst 385 nurses in Kerman, Iran; hence, a three-part questionnaire was applied: part I, a demographic data sheet, part II, attitude measuring instrument, and part III, perception measuring instrument in nursing advocacy. The results implied that fairly positive attitudes and perception were found amongst the participants, and nurses' attitudes, in general, were positively correlated to their perception toward nursing advocacy. This means that with an improvement in perception, the attitude would also improve. In addition to our findings, it seems that these nurses needed more advocacy educational programs and support from responsible employers.

Highway Maintenance Equipment Operator: Basic Core. Training Materials.

ERIC Educational Resources Information Center

Perky, Sandra Dutreau; And Others

This basic core curriculum is part of a three-part series of instructional guides designed for use in teaching a course in highway maintenance equipment operation. Addressed in the individual units of the curriculum, after an orientation unit, are safety; basic math; basic hand tools; procedures for loading. lashing, and unloading equipment;…

Phase II, improved work zone design guidelines and enhanced model of traffic delays in work zones : final report, March 2009.

DOT National Transportation Integrated Search

2009-03-01

This project contains three major parts. In the first part a digital computer simulation model was developed with the aim to model the traffic through a freeway work zone situation. The model was based on the Arena simulation software and used cumula...

2+2+2 Dissemination Project Final Report.

ERIC Educational Resources Information Center

Sloane, Diana; And Others

An overview is provided in this three-part final report of a project designed to disseminate information to assist California high schools, Regional Occupation Programs, and colleges in developing and strengthening 2+2+2 programs. Part I reviews the following project objectives: (1) hire a project coordinator and technical assistant; (2) develop a…

Training Program for Operation of Emergency Vehicles. Instructor Lesson Plans.

ERIC Educational Resources Information Center

INNOVATRIX, Inc., Ingomar, PA.

Unit lesson plans for the three parts of the Emergency Vehicle (EV) Operator training program are provided. The units in parts 1 and 2 are designed for use in a classroom setting and contain the following components: description of the unit; trainees' knowledge objectives; instructor preparation activities; instructional content/presentation…

Women's Action Almanac: A Complete Resource Guide.

ERIC Educational Resources Information Center

Williamson, Jane, Ed.; And Others

Designed to provide answers to questions on women's issues and programs, the guide is arranged into two parts. Part 1, which comprises about three-fourths of the guide, contains background information and answers to often asked questions on 84 issues, such as abortion, affirmative action, battered women, divorce, incest, and insurance. Each entry…

Phase II, improved work zone design guidelines and enhanced model of traffic delays in work zones : executive summary report.

DOT National Transportation Integrated Search

2009-03-01

This project contains three major parts. In the first part a digital computer simulation model was developed with the aim to model the traffic through a freeway work zone situation. The model was based on the Arena simulation software and used cumula...

Energy Conservation Education. An Action Approach. Grades 4-9.

ERIC Educational Resources Information Center

Zamm, Michael; Samuel, Barry C.

Seventeen lessons are provided in this curriculum designed to involve students (grades 4-9) in energy conservation. The lessons are presented in four parts. The three lessons in part I are intended to give students a preliminary conceptual framework for energy conservation and to motivate them to participate in the conservation-action projects…

Quantitative x-ray diffraction mineralogy of Los Angeles basin core samples

USGS Publications Warehouse

Hein, James R.; McIntyre, Brandie R.; Edwards, Brian D.; Lakota, Orion I.

2006-01-01

This report contains X-ray diffraction (XRD) analysis of mineralogy for 81 sediment samples from cores taken from three drill holes in the Los Angeles Basin in 2000-2001. We analyzed 26 samples from Pier F core, 29 from Pier C core, and 26 from the Webster core. These three sites provide an offshore-onshore record across the Southern California coastal zone. This report is designed to be a data repository; these data will be used in further studies, including geochemical modeling as part of the CABRILLO project. Summary tables quantify the major mineral groups, whereas detailed mineralogy is presented in three appendices. The rationale, methodology, and techniques are described in the following paper.

Architecture for Education: New School Designs from the Chicago Competition.

ERIC Educational Resources Information Center

Robbins, Mark; Moelis, Cindy S.; Clarke, Pamela H.; Hendrickson, Jamie; Nowaczewski, Jeanne L.; Haar, Sharon

This volume documents the work that resulted from the Chicago Public Schools Design Competition, explaining research and policies underlying the competition's criteria. The volume has three parts. Book 1, "The Chicago Experience," written by the competition's organizers, describes the competition's process and explains how it allowed community…

Pre-Algebra Lexicon.

ERIC Educational Resources Information Center

Hayden, Dunstan; Cuevas, Gilberto

The pre-algebra lexicon is a set of classroom exercises designed to teach the technical words and phrases of pre-algebra mathematics, and includes the terms most commonly found in related mathematics courses. The lexicon has three parts, each with its own introduction. The first introduces vocabulary items in three groups forming a learning…

Basic Electricity. Part 4.

ERIC Educational Resources Information Center

Kilmer, Donald C.

Designed for the student interested in a vocation in electrical work, this guide, fourth in a set of four, includes three units: Unit X--Splicing Wires, covering thirteen lessons (removing insulation, pigtail splice, Western Union splice, tap splice, extension cord splice, connecting wires to a terminal screw, underwriter's knot, three-wire ground…

Teen PACK: Population Awareness Campaign Kit.

ERIC Educational Resources Information Center

Zero Population Growth, Inc., Washington, DC.

This packet of instructional materials is designed to teach teenagers about the effects of overpopulation on the world and on the individual. Information is presented in three related booklets. The first of the three parts of the "Teen Population Awareness Campaign Kit," illustrates overpopulation through profiles of teens living in…

Shuttle/Agena study. Volume 2, part 2: Agena tug configurations, Shuttle/Agena interface, performance, safety, cost

NASA Technical Reports Server (NTRS)

1972-01-01

An evaluation of the compatibility of the space shuttle and Agena rocket vehicle was conducted. The Agena space tug configuration design is described in terms of the total vehicle system as well as the individual subsystems and major assemblies and components. The complete interface between the Agena space tug and the space shuttle orbiter is defined for in-flight and ground operations. The derivation and design of an evolutionary stage is also presented. This vehicle conforms to the same guidelines and interface requirements as the Agena space tug. Performance data developed for both vehicles for each of the three study baseline missions are included.

Permanent-magnet linear alternators. I - Fundamental equations. II - Design guidelines

NASA Astrophysics Data System (ADS)

Boldea, I.; Nasar, S. A.

1987-01-01

The general equations of permanent-magnet heteropolar three-phase and single-phase linear alternators, powered by free-piston Stirling engines, are presented, with application to space power stations and domestic applications including solar power plants. The equations are applied to no-load and short-circuit conditions, illustrating the end-effect caused by the speed-reversal process. In the second part, basic design guidelines for a three-phase tubular linear alternator are given, and the procedure is demonstrated with the numerical example of the design of a 25-kVA, 14.4-m/s, 120/220-V, 60-Hz alternator.

Liquid rocket booster study. Volume 2, book 6, appendix 10: Vehicle systems effects

NASA Technical Reports Server (NTRS)

1989-01-01

Three tasks were undertaken by Eagle Engineering as a part of the Liquid Rocket Booster (LRB) study. Task 1 required Eagle to supply current data relative to the Space Shuttle vehicle and systems affected by an LRB substitution. Tables listing data provided are presented. Task 2 was to evaluate and compare shuttle impacts of candidate LRB configuration in concert with overall trades of analysis activity. Three selected configurations with emphasis on flight loads, separation dynamics, and cost comparison are presented. Task 3 required the development of design guidelines and requirements to minimize impacts to the Space Shuttle system from all LRB substitution. Results are presented for progress to date.

Spherically Actuated Motor

NASA Technical Reports Server (NTRS)

Peeples, Steven

2015-01-01

A three degree of freedom (DOF) spherical actuator is proposed that will replace functions requiring three single DOF actuators in robotic manipulators providing space and weight savings while reducing the overall failure rate. Exploration satellites, Space Station payload manipulators, and rovers requiring pan, tilt, and rotate movements need an actuator for each function. Not only does each actuator introduce additional failure modes and require bulky mechanical gimbals, each contains many moving parts, decreasing mean time to failure. A conventional robotic manipulator is shown in figure 1. Spherical motors perform all three actuation functions, i.e., three DOF, with only one moving part. Given a standard three actuator system whose actuators have a given failure rate compared to a spherical motor with an equal failure rate, the three actuator system is three times as likely to fail over the latter. The Jet Propulsion Laboratory reliability studies of NASA robotic spacecraft have shown that mechanical hardware/mechanism failures are more frequent and more likely to significantly affect mission success than are electronic failures. Unfortunately, previously designed spherical motors have been unable to provide the performance needed by space missions. This inadequacy is also why they are unavailable commercially. An improved patentable spherically actuated motor (SAM) is proposed to provide the performance and versatility required by NASA missions.

Aerodynamic Design Study of Advanced Multistage Axial Compressor

NASA Technical Reports Server (NTRS)

Larosiliere, Louis M.; Wood, Jerry R.; Hathaway, Michael D.; Medd, Adam J.; Dang, Thong Q.

2002-01-01

As a direct response to the need for further performance gains from current multistage axial compressors, an investigation of advanced aerodynamic design concepts that will lead to compact, high-efficiency, and wide-operability configurations is being pursued. Part I of this report describes the projected level of technical advancement relative to the state of the art and quantifies it in terms of basic aerodynamic technology elements of current design systems. A rational enhancement of these elements is shown to lead to a substantial expansion of the design and operability space. Aerodynamic design considerations for a four-stage core compressor intended to serve as a vehicle to develop, integrate, and demonstrate aerotechnology advancements are discussed. This design is biased toward high efficiency at high loading. Three-dimensional blading and spanwise tailoring of vector diagrams guided by computational fluid dynamics (CFD) are used to manage the aerodynamics of the high-loaded endwall regions. Certain deleterious flow features, such as leakage-vortex-dominated endwall flow and strong shock-boundary-layer interactions, were identified and targeted for improvement. However, the preliminary results were encouraging and the front two stages were extracted for further aerodynamic trimming using a three-dimensional inverse design method described in part II of this report. The benefits of the inverse design method are illustrated by developing an appropriate pressure-loading strategy for transonic blading and applying it to reblade the rotors in the front two stages of the four-stage configuration. Multistage CFD simulations based on the average passage formulation indicated an overall efficiency potential far exceeding current practice for the front two stages. Results of the CFD simulation at the aerodynamic design point are interrogated to identify areas requiring additional development. In spite of the significantly higher aerodynamic loadings, advanced CFD-based tools were able to effectively guide the design of a very efficient axial compressor under state-of-the-art aeromechanical constraints.

Knowledge workers and knowledge-intense organizations, Part 2: Designing and managing for productivity.

PubMed

Weaver, D; Sorrells-Jones, J

1999-09-01

Our economy is shifting from a hard goods and material products base to one in which knowledge is the primary mode of production. Organizations are experimenting with designs that support knowledge work by clustering individuals with different but complementary skills in focused teams. The goal is to increase applied knowledge that furthers the organization's strategic intent. The team-based knowledge work model holds promise for healthcare organizations that are under pressure to use knowledge to improve clinical care, integrate care across disciplines and settings, and accept accountability for costs. However, the shift from the traditional bureaucratic model to the flexible team-based design mandates changes in the design of the organization, the role of leadership, and the attributes of the teams and team members. In Part 2 of this three-part series, the authors explore the necessary design changes and the new roles for leadership, teams, and their members. Additionally, implications for healthcare clinicians, particularly nurses, are discussed.

Book Review

NASA Astrophysics Data System (ADS)

Mishchenko, Michael I.

2016-08-01

The main purpose of this exemplary book is to provide a systematic exposition of the entire field of optical tweezers and their applications. The book is divided into three (approximately equal) parts summarizing the electromagnetic theory of optical tweezers (Part I), the practice of designing and building optical tweezers (Part II), and extensive applications of optical tweezers in various branches of science (Part III). The exposition is highly methodical and addresses the needs of anyone dealing with optical tweezers, be it a theoretician, an engineer/experimentalist, a routine practitioner, or an interested scientist.

Designing SoTL Studies--Part II: Practicality

ERIC Educational Resources Information Center

Bartsch, Robert A.

2013-01-01

This chapter suggests solutions to common practical problems in designing SoTL studies. In addition, the advantages and disadvantages of different types of designs are discussed. [Part I available at EJ1029363.

Three-dimensional cellular deformation analysis with a two-photon magnetic manipulator workstation.

PubMed

Huang, Hayden; Dong, Chen Y; Kwon, Hyuk-Sang; Sutin, Jason D; Kamm, Roger D; So, Peter T C

2002-04-01

The ability to apply quantifiable mechanical stresses at the microscopic scale is critical for studying cellular responses to mechanical forces. This necessitates the use of force transducers that can apply precisely controlled forces to cells while monitoring the responses noninvasively. This paper describes the development of a micromanipulation workstation integrating two-photon, three-dimensional imaging with a high-force, uniform-gradient magnetic manipulator. The uniform-gradient magnetic field applies nearly uniform forces to a large cell population, permitting statistical quantification of select molecular responses to mechanical stresses. The magnetic transducer design is capable of exerting over 200 pN of force on 4.5-microm-diameter paramagnetic particles and over 800 pN on 5.0-microm ferromagnetic particles. These forces vary within +/-10% over an area 500 x 500 microm2. The compatibility with the use of high numerical aperture (approximately 1.0) objectives is an integral part of the workstation design allowing submicron-resolution, three-dimensional, two-photon imaging. Three-dimensional analyses of cellular deformation under localized mechanical strain are reported. These measurements indicate that the response of cells to large focal stresses may contain three-dimensional global deformations and show the suitability of this workstation to further studying cellular response to mechanical stresses.

On-plant movement and feeding of western bean cutworm (Lepidoptera: Noctuidae) early instars on corn.

PubMed

Paula-Moraes, S V; Hunt, T E; Wright, R J; Hein, G L; Blankenship, E E

2012-12-01

Western bean cutworm, Striacosta albicosta (Smith), has undergone a recent eastward expansion from the western U.S. Corn Belt to Pennsylvania and parts of Canada. Little is known about its ecology and behavior, particularly during the early instars, on corn (Zea mays L.). There is a narrow treatment window for larvae, and early detection of the pest in the field is essential. An understanding of western bean cutworm larval feeding and early-instar dispersal is essential to understand larval survival and establishment in corn. Studies were conducted in 2009 through 2011 in Nebraska to determine the feeding and dispersal of early-instar western bean cutworm on corn. The treatment design was a factorial with three corn stages (pretassel, tassel, and posttassel) and five corn plant zones (tassel, above ear, primary ear, secondary ear, and below ear) in a randomized complete block design. The effects of different corn tissues on larval survival and development were investigated in laboratory studies in a randomized complete block design during 2009 and 2011. Treatments were different corn tissues (leaf alone, leaf with developing tassel, pollen, pollen plus silk, and silk alone). Results demonstrated that neonate larvae move to the upper part of the plant, independent of corn stage. Larval growth was optimal when fed on tassel tissue. Overall results indicated a selective benefit for movement of the early instar to upper part of the plant.

Space Technology 5: Enabling Future Micro-Sat Constellation Science Missions

NASA Technical Reports Server (NTRS)

Carlisle, Candace C.; Webb, Evan H.

2004-01-01

The Space Technology 5 (ST-5) Project is part of NASA s New Millennium Program. ST-5 will consist of a constellation of three micro-satellites, each approximately 25 kg in mass. The mission goals are to demonstrate the research-quality science capability of the ST-5 spacecraft; to operate the three spacecraft as a constellation; and to design, develop and flight-validate three capable micro-satellites with new technologies. ST-5 is designed to measurably raise the utility of small satellites by providing high functionality in a low mass, low power, and low volume package. The whole of ST-5 is greater than the sum of its parts: the collection of components into the ST-5 spacecraft allows it to perform the functionality of a larger scientific spacecraft on a micro-satellite platform. The ST-5 mission was originally designed to be launched as a secondary payload into a Geosynchronous Transfer Orbit (GTO). Recently, the mission has been replanned for a Pegasus XL dedicated launch into an elliptical polar orbit. A three-month flight demonstration phase, beginning in March 2006, will validate the ability to perform science measurements, as well as the technologies and constellation operations. ST- 5 s technologies and concepts will then be transferred to future micro-sat science missions.

Space Technology 5: Enabling Future Micro-Sat Constellation Science Missions

NASA Technical Reports Server (NTRS)

Carlisle, Candace C.; Webb, Evan H.; Slavin, James A.

2004-01-01

The Space Technology 5 (ST-5) Project is part of NASA s New Millennium Program. ST-5 will consist of a constellation of three micro-satellites, each approximately 25 kg in mass. The mission goals are to demonstrate the research-quality science capability of the ST-5 spacecraft, to operate the three spacecraft as a constellation; and to design, develop and flight-validate three capable micro-satellites with new technologies. ST-5 is designed to measurably raise the utility of small satellites by providing high functionality in a low mass, low power, and low volume package. The whole of ST-5 is greater than the sum of its parts: the collection of components into the ST-5 spacecraft allows it to perform the functionality of a larger scientific spacecraft on a micro-satellite platform. The ST-5 mission was originally designed to be launched as a secondary payload into a Geosynchronous Transfer Orbit (GTO). Recently, the mission has been replanned for a Pegasus XL dedicated launch into an elliptical polar orbit. A three-month flight demonstration phase, beginning in March 2006, will validate the ability to perform science measurements, as well as the technologies and constellation operations. ST- 5 s technologies and concepts will then be transferred to future micro-sat science missions.

Response to Placebo in Clinical Epilepsy Trials - Old Ideas and New Insights

PubMed Central

Goldenholz, Daniel M.; Goldenholz, Shira R

2016-01-01

Randomized placebo controlled trials are a mainstay of modern clinical epilepsy research; the success or failure of innovative therapies depends on proving superiority to a placebo. Consequently, understanding what drives response to placebo (including the “placebo effect”) may facilitate evaluation of new therapies. In this review, part one will explore observations about placebos specific to epilepsy, including the relatively higher placebo response in children, apparent increase in placebo response over the past several decades, geographic variation in placebo effect, relationship to baseline epilepsy characteristics, influence of nocebo on clinical trials, the possible increase in (SUDEP) in placebo arms of trials, and patterns that placebo responses appear to follow in individual patients. Part two will discuss the principal causes of placebo responses, including regression to the mean, anticipation, classical conditioning, the Hawthorne effect, expectations from symbols, and the natural history of disease. Included in part two will be a brief overview of recent advances using simulations from large datasets that have afforded new insights into causes of epilepsy related placebo responses. In part three, new developments in study design will be explored, including sequential parallel comparison, two-way enriched design, time to pre-randomization, delayed start, and cohort reduction techniques. PMID:26921852

Sustainable design guidelines to support the Washington State ferries terminal design manual : assessment of copper and zinc adsorption to lignocellulosic filtration media using laboratory and field scale column tests for the purpose of urban stormwater r

DOT National Transportation Integrated Search

2016-10-01

This report represents the third and final phase of a three-part effort aimed at providing Sustainable Design Guidelines for : Washington State Ferry terminals, specifically addressing the efficacy for removal of copper and zinc using a biobased filt...

Learning Achievement Packages, Language Arts--Spanish Grammar.

ERIC Educational Resources Information Center

Andrade, Magdalena; Sones, Mary

This set of three Spanish curriculum units is part of a series developed as part of a Spanish-English bilingual project and designed to deal with special language difficulties in grades 7-12 and adult education classes. These units are intended to aid the first- or second-year student in specific problem areas: capital letters, dictionary use, and…

Society, the City and the Space-Economy of Urbanism, Resource Paper No. 18.

ERIC Educational Resources Information Center

Harvey, David

Theoretical concepts of spatial organization appropriate to bringing about humanizing social change are identified. This resource paper is part of a series designed to supplement existing texts and to fill a gap between research and accessible materials in geography. Part 1, societies and cities, introduces three basic forms of society:…

Open Court Reading©. What Works Clearinghouse Intervention Report. Updated October 2014

ERIC Educational Resources Information Center

What Works Clearinghouse, 2014

2014-01-01

"Open Court Reading©" is a reading program for grades K-6 published by McGraw-Hill Education that is designed to teach decoding, comprehension, inquiry, and writing in a three-part logical progression. Part One of each unit, Preparing to Read, focuses on phonemic awareness, sounds and letters, phonics, fluency, and word knowledge. Part…

Status of States' Progress in Implementing Part H of IDEA: Report #3.

ERIC Educational Resources Information Center

Harbin, Gloria L.; And Others

This report focuses on progress in the implementation of Part H of the Individuals with Disabilities Education Act (IDEA) through a comparison of states' status on three yearly administrations of the State Progress Scale. The scale was designed to monitor implementation of the required 14 components in the stages of policy development, policy…

Effects of raw materials on the properties of wood fiber-polyethylene composites--part 3: effect of a compatibilizer and wood adhesive on the interfacial adhesion of wood/plastic composites

Treesearch

Chin-yin Hwang; Chung-yun Hse; Todd F. Shupe

2008-01-01

The objective of this study was to examine the effect of maleated polypropylene compatabilizer on the interfacial properties of wood and polyolefins. Birch wood dowels containing an adhesive applied on the surface were embedded in molten plastic matrices using specially designed jigs. The three plastics investigated included low density polyethylene (LFPE), linear low...

What Do Upper Secondary School Teachers Want to Know from Research on the Use of ICT and How Does This Inform a Research Design?

ERIC Educational Resources Information Center

Olofsson, Anders D.; Lindberg, J. Ola; Fransson, Göran

2017-01-01

This study investigates what teachers taking part in a longitudinal research project on the use of ICT for teaching and learning in three upper secondary schools in Sweden want to learn more about. At the beginning of the project eighty-four teachers were invited to respond to a questionnaire relating to what teachers wanted to learn more about…

Clinical extracts of biomedical literature for patient-centered problem solving.

PubMed Central

Florance, V

1996-01-01

This paper reports on a four-part qualitative research project aimed at designing an online document surrogate tailored to the needs of physicians seeking biomedical literature for use in clinical problem solving. The clinical extract, designed in collaboration with three practicing physicians, combines traditional elements of the MEDLINE record (e.g., title, author, source, abstract) with new elements (e.g., table captions, text headings, case profiles) suggested by the physicians. Specifications for the prototype clinical extract were developed through a series of relevance-scoring exercises and semi-structured interviews. For six clinical questions, three physicians assessed the applicability of selected articles and their document surrogates, articulating relevance criteria and reasons for their judgments. A prototype clinical extract based on their suggestions was developed, tested, evaluated, and revised. The final version includes content and format aids to make the extract easy to use. The goals, methods, and outcomes of the research study are summarized, and a template of the final design is provided. PMID:8883986

Learning the Concept of Researcher as Instrument in Qualitative Research

ERIC Educational Resources Information Center

Xu, Mengxuan Annie; Storr, Gail Blair

2012-01-01

The authors describe the process whereby a student with a background in economics was guided to understand the central role in qualitative research of the researcher as instrument. The instructor designed a three-part mock research project designed to provide experiential knowledge of the enterprise of qualitative research. Students, as neophyte…

Designing and Producing Videotex Instruction. A Producer's Handbook.

ERIC Educational Resources Information Center

Nugent, Gwen; And Others

One of the objectives of the Nebraska Interactive Cable Project, an investigation of the educational potential of interactive cable, was to develop a design and production process for interactive cable/videotex instruction. The first part of the project involved the adaptation of three existing correspondence courses on marriage and the family,…

22 CFR 11.2 - Written examination for appointment to class 7 or 8.

Code of Federal Regulations, 2012 CFR

2012-04-01

... written examination is designed to permit the Board to test the candidate's intelligence, breadth and quality of knowledge, and understanding. It will consist of three parts: (1) A general ability test, (2... designated cities in the United States and at Foreign Service posts on dates established by the Board of...

22 CFR 11.2 - Written examination for appointment to class 7 or 8.

Code of Federal Regulations, 2013 CFR

2013-04-01

... written examination is designed to permit the Board to test the candidate's intelligence, breadth and quality of knowledge, and understanding. It will consist of three parts: (1) A general ability test, (2... designated cities in the United States and at Foreign Service posts on dates established by the Board of...

22 CFR 11.2 - Written examination for appointment to class 7 or 8.

Code of Federal Regulations, 2010 CFR

2010-04-01

... written examination is designed to permit the Board to test the candidate's intelligence, breadth and quality of knowledge, and understanding. It will consist of three parts: (1) A general ability test, (2... designated cities in the United States and at Foreign Service posts on dates established by the Board of...

22 CFR 11.2 - Written examination for appointment to class 7 or 8.

Code of Federal Regulations, 2011 CFR

2011-04-01

... written examination is designed to permit the Board to test the candidate's intelligence, breadth and quality of knowledge, and understanding. It will consist of three parts: (1) A general ability test, (2... designated cities in the United States and at Foreign Service posts on dates established by the Board of...

22 CFR 11.2 - Written examination for appointment to class 7 or 8.

Code of Federal Regulations, 2014 CFR

2014-04-01

... written examination is designed to permit the Board to test the candidate's intelligence, breadth and quality of knowledge, and understanding. It will consist of three parts: (1) A general ability test, (2... designated cities in the United States and at Foreign Service posts on dates established by the Board of...

Hot mix asphalt research investigation for Connecticut : part A - reduction in the number Of superpave mix design levels.

DOT National Transportation Integrated Search

2009-07-01

This research is the first in a series of investigated topics surrounding hot mix asphalt in Connecticut. : Currently there are at least 12 different mix designs that need to be developed by producers of HMA with : four traffic levels and three nomin...

75 FR 20111 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... the ``three heating products'') must be designed to ``achieve the maximum improvement in energy... and CO 2 savings are performed with different computer models, leading to different time frames for... of EPCA sets forth a variety of provisions designed to improve energy efficiency. Part A\\1\\ of Title...

Authentic Performance of Complex Problem-Solving Tasks with an EPSS.

ERIC Educational Resources Information Center

Leighton, Chet; McCabe, Cynthia

Just-In-Time Learning (JIT Learning) is a semester-long graduate course that teaches corporate trainers and instructional designers how to design performance improvement interventions. This course is part of a Master's program in Instructional Technology at San Francisco State University. The course has been offered three times and has been…

Lessons in Financial Literacy Task Design: Authentic, Imaginable, Useful

ERIC Educational Resources Information Center

Sawatzki, Carly

2017-01-01

As part of ongoing design-based research exploring financial literacy teaching and learning, 10 tasks termed "financial dilemmas" were trialled by 14 teachers and more than 300 year 5 and 6 students in four government primary schools in urban Darwin. Drawing on data related to three tasks--"Catching the bus," "Laser…

Tamazight: A Competency-Based Curriculum, Beginning & Intermediate Students.

ERIC Educational Resources Information Center

Azaguagh, Lahcen

The Peace Corps volunteer language training materials for the Moroccan language Tamazight are designed for group, individual, or self-instruction. An introductory section gives the learner an overview of language characteristics, the materials, and their design. The main section of the materials is divided into three parts. The first contains 16…

Design and Analysis of Turbomachinery for Space Applications

NASA Technical Reports Server (NTRS)

Dorney, D.; Garcia, Roberto (Technical Monitor)

2002-01-01

This presentation provides an overview of CORSAIR, a three dimensional computational fluid dynamics software code for the analysis of turbomachinery components available from NASA, and discusses its potential use in the design of these parts. Topics covered include: time-dependent equations of motion, grid topology, turbulence models, boundary conditions, parallel simulations and miscellaneous capabilities.

Learning about "Half": Critical Aspects and Pedagogical Strategies in Designed Preschool Activities

ERIC Educational Resources Information Center

Björklund, Camilla

2018-01-01

This is an empirical inquiry concerning children's concept development and early mathematics teaching. The intention is to broaden the understanding of preschool children's perceptions of the concept "half" (as 1 of 2 equal parts of a whole), in designed mathematics teaching settings. Three teachers working with 4-5-year-old children…

Using an Architectural Metaphor for Information Design in Hypertext.

ERIC Educational Resources Information Center

Deboard, Donn R.; Lee, Doris

2001-01-01

Uses Frank Lloyd Wright's (1867-1959) organic architecture as a metaphor to define the relationship between a part and a whole, whether the focus is on a building and its surroundings or information delivered via hypertext. Reviews effective strategies for designing text information via hypertext and incorporates three levels of information…

Two activities with a simple model of the solar system: discovering Kepler’s 3rd law and investigating apparent motion of Venus

NASA Astrophysics Data System (ADS)

Rovšek, Barbara; Guštin, Andrej

2018-01-01

An astronomy ‘experiment’ composed of three parts is described in the article. Being given necessary data a simple model of inner planets of the solar system is made in the first part with planets’ circular orbits using appropriate scale. In the second part revolution of the figurines used as model representations of the planets along their orbits is observed. In the third part of activity apparent motion of Venus with respect to the observer on the Earth is studied. In the second part of the paper problems are given, which relate to experimental activities and are designed to test if learning outcomes of the experiment have been achieved: if correlation between orbital radius and orbital velocity has been perceived, concepts related to motion of Venus as observed from the Earth have been acquired and periodicity recognized. Described astronomy ‘experiment’ was one of the three science experiments given to 11 and 12 years old students prior to Slovene science competition in 2017 (the call for competition is at www.dmfa.si, guidelines for the experiment (in Slovene) can be found at www.kresnickadmfa.si/files/2016/07/poskus_1617_r67p1_S.pdf). At the end of the paper the results obtained at competition are presented.

Application of neural networks to group technology

NASA Astrophysics Data System (ADS)

Caudell, Thomas P.; Smith, Scott D. G.; Johnson, G. C.; Wunsch, Donald C., II

1991-08-01

Adaptive resonance theory (ART) neural networks are being developed for application to the industrial engineering problem of group technology--the reuse of engineering designs. Two- and three-dimensional representations of engineering designs are input to ART-1 neural networks to produce groups or families of similar parts. These representations, in their basic form, amount to bit maps of the part, and can become very large when the part is represented in high resolution. This paper describes an enhancement to an algorithmic form of ART-1 that allows it to operate directly on compressed input representations and to generate compressed memory templates. The performance of this compressed algorithm is compared to that of the regular algorithm on real engineering designs and a significant savings in memory storage as well as a speed up in execution is observed. In additions, a `neural database'' system under development is described. This system demonstrates the feasibility of training an ART-1 network to first cluster designs into families, and then to recall the family when presented a similar design. This application is of large practical value to industry, making it possible to avoid duplication of design efforts.

Tanzanian Swahili: Teacher's Handbook. Peace Corps Language Handbook Series.

ERIC Educational Resources Information Center

Clark, Raymond C.; Hawkinson, Annie K.

This teaching guide is designed to accompany the three Peace Corps students' books in Tanzanian Swahili. Its goal is to help the native speaker understand the American volunteers' viewpoints and to provide detailed information on methods and techniques for teaching the Swahili language and Tanzanian culture. The guide has three parts: (1) an…

Greek classicism in living structure? Some deductive pathways in animal morphology.

PubMed

Zweers, G A

1985-01-01

Classical temples in ancient Greece show two deterministic illusionistic principles of architecture, which govern their functional design: geometric proportionalism and a set of illusion-strengthening rules in the proportionalism's "stochastic margin". Animal morphology, in its mechanistic-deductive revival, applies just one architectural principle, which is not always satisfactory. Whether a "Greek Classical" situation occurs in the architecture of living structure is to be investigated by extreme testing with deductive methods. Three deductive methods for explanation of living structure in animal morphology are proposed: the parts, the compromise, and the transformation deduction. The methods are based upon the systems concept for an organism, the flow chart for a functionalistic picture, and the network chart for a structuralistic picture, whereas the "optimal design" serves as the architectural principle for living structure. These methods show clearly the high explanatory power of deductive methods in morphology, but they also make one open end most explicit: neutral issues do exist. Full explanation of living structure asks for three entries: functional design within architectural and transformational constraints. The transformational constraint brings necessarily in a stochastic component: an at random variation being a sort of "free management space". This variation must be a variation from the deterministic principle of the optimal design, since any transformation requires space for plasticity in structure and action, and flexibility in role fulfilling. Nevertheless, finally the question comes up whether for animal structure a similar situation exists as in Greek Classical temples. This means that the at random variation, that is found when the optimal design is used to explain structure, comprises apart from a stochastic part also real deviations being yet another deterministic part. This deterministic part could be a set of rules that governs actualization in the "free management space".

Rocket-Based Combined Cycle Flowpath Testing for Modes 1 and 4

NASA Technical Reports Server (NTRS)

Rice, Tharen

2002-01-01

Under sponsorship of the NASA Glenn Research Center (NASA GRC), the Johns Hopkins University Applied Physics Laboratory (JHU/APL) designed and built a five-inch diameter, Rocket-Based Combined Cycle (RBCC) engine to investigate mode 1 and mode 4 engine performance as well as Mach 4 inlet performance. This engine was designed so that engine area and length ratios were similar to the NASA GRC GTX engine is shown. Unlike the GTX semi-circular engine design, the APL engine is completely axisymmetric. For this design, a traditional rocket thruster was installed inside of the scramjet flowpath, along the engine centerline. A three part test series was conducted to determine Mode I and Mode 4 engine performance. In part one, testing of the rocket thruster alone was accomplished and its performance determined (average Isp efficiency = 90%). In part two, Mode 1 (air-augmented rocket) testing was conducted at a nominal chamber pressure-to-ambient pressure ratio of 100 with the engine inlet fully open. Results showed that there was neither a thrust increment nor decrement over rocket-only thrust during Mode 1 operation. In part three, Mode 4 testing was conducted with chamber pressure-to-ambient pressure ratios lower than desired (80 instead of 600) with the inlet fully closed. Results for this testing showed a performance decrease of 20% as compared to the rocket-only testing. It is felt that these results are directly related to the low pressure ratio tested and not the engine design. During this program, Mach 4 inlet testing was also conducted. For these tests, a moveable centerbody was tested to determine the maximum contraction ratio for the engine design. The experimental results agreed with CFD results conducted by NASA GRC, showing a maximum geometric contraction ratio of approximately 10.5. This report details the hardware design, test setup, experimental results and data analysis associated with the aforementioned tests.

Design Research of TIANDITU (Map Worl)-Based Geographic Information System for Travelling Service

NASA Astrophysics Data System (ADS)

Zhang, J.; Zhang, H.; Wang, C.

2014-04-01

TIANDITU (Map World) is the public version of the National Platform for Common Geospatial Information Service, and the travelling channel is TIANDITU-based geographic information platform for travelling service. With the development of tourism, traditional ways for providing travelling information cannot meet the needs of travelers. As such, the travelling channel of TIANDITU focuses on providing travel information abundantly and precisely, which integrated the geographic information data of TIANDITU Version 2.0 and the authoritative information resources from China National Tourism Administration. Furthermore, spatial positioning, category and information query of various travelling information were offered for the public in the travelling channel. This research mainly involves three important parts: the system design, key technologies of the system design and application examples. Firstly, this paper introduced the design of TIANDITU-based geographic information system for travelling service, and the general and database design were described in detail. The designs for general, database and travelling service above should consider lots of factors which illustrated in the paper in order to guarantee the efficient service. The process of system construction, the content of geographic information for travelling and system functions of geographic information for travelling are also proposed via diagram in this part. Then several key technologies were discussed, including the travelling information integration for main node and among nodes, general architecture design and management system for travelling channel, web portals and system interface. From the perspective of main technologies, this part describes how TIANDITU travelling channel can realize various functions and reach the requirements from different users. Finally, three application examples about travelling information query were listed shortly. The functions and search results are shown clearly in this part. In all, TIANDITU-based geographic information system for travelling service aimed to integrate the travelling information resources from national, provincial and municipal levels, and finally realized to provide "one stop" travelling service for users in the end.

Design and development of broadband piezoelectric vibration energy harvester based on compliant orthoplanar spring

NASA Astrophysics Data System (ADS)

Dhote, Sharvari

With advancement in technology, power requirements are reduced drastically for sensor nodes. The piezoelectric vibration energy harvesters generate sufficient power to low-powered sensor nodes. The main requirement of energy harvester is to provide a broad bandwidth. A conventional linear harvester does not satisfy this requirement. Therefore, the research focus is shifted to exploiting nonlinearity to widen the bandwidth of the harvester. Although nonlinear techniques are promising for broadening a bandwidth, reverse sweep shows reduced response as compared to the forward sweep. To overcome this issue, this thesis presents the design and development of a broadband piezoelectric vibration energy harvester based on a nonlinear multi-frequency compliant orthoplanar spring. This thesis is divided into three parts. The first part presents the design and experimental study of a tri-leg compliant orthoplanar spring for a broadband energy harvesting. The harvester performance is enhanced through the use of lightweight masses, which bring nonlinear vibration modes closer. The performance of the harvester is analyzed through development of a mathematical model based on the Duffing oscillator. The experimental and numerical results are in good agreement. The parametric study shows that an optimum performance is achieved by further reducing a gap in between the vibration modes using different weight masses. In the second part of the research, multiple (bi, quad and pent) leg compliant orthoplanar springs are designed to understand their role in expanding the bandwidth and reducing gap between vibration modes. The designed harvesters are compared by calculating the figure of merits. The quad-leg design provides a better performance in terms of power density and bandwidth among all the designs. The reverse sweep response is comparable to the forward sweep in terms of bandwidth. In the final part, a magnetic force is applied to the tri-leg harvester, which enhanced the voltage output and bandwidth. In addition, vibration modes have been brought even closer by reducing the gap between the modes. Overall, the proposed harvester performance is significantly improved using multiple legs attached with piezoelectric plates and masses, bringing the modes closer in the forward and reverse sweeps, making it advantageous to harvest energy from wideband environmental vibrations.

SynBioSS designer: a web-based tool for the automated generation of kinetic models for synthetic biological constructs

PubMed Central

Weeding, Emma; Houle, Jason

2010-01-01

Modeling tools can play an important role in synthetic biology the same way modeling helps in other engineering disciplines: simulations can quickly probe mechanisms and provide a clear picture of how different components influence the behavior of the whole. We present a brief review of available tools and present SynBioSS Designer. The Synthetic Biology Software Suite (SynBioSS) is used for the generation, storing, retrieval and quantitative simulation of synthetic biological networks. SynBioSS consists of three distinct components: the Desktop Simulator, the Wiki, and the Designer. SynBioSS Designer takes as input molecular parts involved in gene expression and regulation (e.g. promoters, transcription factors, ribosome binding sites, etc.), and automatically generates complete networks of reactions that represent transcription, translation, regulation, induction and degradation of those parts. Effectively, Designer uses DNA sequences as input and generates networks of biomolecular reactions as output. In this paper we describe how Designer uses universal principles of molecular biology to generate models of any arbitrary synthetic biological system. These models are useful as they explain biological phenotypic complexity in mechanistic terms. In turn, such mechanistic explanations can assist in designing synthetic biological systems. We also discuss, giving practical guidance to users, how Designer interfaces with the Registry of Standard Biological Parts, the de facto compendium of parts used in synthetic biology applications. PMID:20639523

Degradation of folic acid wastewater by electro-Fenton with three-dimensional electrode and its kinetic study

PubMed Central

Xiaochao, Gu; Jin, Tian; Xiaoyun, Li; Bin, Zhou; Xujing, Zheng; Jin, Xu

2018-01-01

The three-dimensional electro-Fenton method was used in the folic acid wastewater pretreatment process. In this study, we researched the degradation of folic acid and the effects of different parameters such as the air sparging rate, current density, pH and reaction time on chemical oxygen demand (COD) removal in folic acid wastewater. A four-level and four-factor orthogonal test was designed and optimal reaction conditions to pretreat folic acid wastewater by three-dimensional electrode were determined: air sparge rate 0.75 l min−1, current density 10.26 mA cm−2, pH 5 and reaction time 90 min. Under these conditions, the removal of COD reached 94.87%. LC-MS results showed that the electro-Fenton method led to an initial folic acid decomposition into p-aminobenzoyl-glutamic acid (PGA) and xanthopterin (XA); then part of the XA was oxidized to pterine-6-carboxylic acid (PCA) and the remaining part of XA was converted to pterin and carbon dioxide. The kinetics analysis of the folic acid degradation process during pretreatment was carried out by using simulated folic acid wastewater, and it could be proved that the degradation of folic acid by using the three-dimensional electro-Fenton method was a second-order reaction process. This study provided a reference for industrial folic acid treatment. PMID:29410807

Approach to a manufacture-oriented modeling of bent tubes depending on the curvature distribution during three-roll-push-bending

NASA Astrophysics Data System (ADS)

Groth, Sebastian; Engel, Bernd; Frohn, Peter

2018-05-01

Kinematic bending processes such as three-roll-push-bending are used to manufacture freeform bent part systems. Due to the kinematic shaping, the bent parts have a characteristic infeed and outfeed area in the transition zone from the straight section into the curved area. These transition zones are currently not considered in the design process, which results in a geometric shape deviation between the CAD model and the bent part. Within this publication, a sensitivity analysis examines the influence of different parameters on the transition zone and the shape deviation. In addition, an approach is presented, which allows a manufacture-oriented modeling of the bending geometry.

Virtual reality exposure using three-dimensional images for the treatment of social phobia.

PubMed

Gebara, Cristiane M; Barros-Neto, Tito P de; Gertsenchtein, Leticia; Lotufo-Neto, Francisco

2016-03-01

To test a potential treatment for social phobia, which provides exposure to phobia-inducing situations via computer-generated, three-dimensional images, using an open clinical trial design. Twenty-one patients with a DSM-IV diagnosis of social phobia took part in the trial. Treatment consisted of up to 12 sessions of exposure to relevant images, each session lasting 50 minutes. Improvements in social anxiety were seen in all scales and instruments used, including at follow-up 6 months after the end of treatment. The average number of sessions was seven, as the participants habituated rapidly to the process. Only one participant dropped out. This study provides evidence that exposure to computer-generated three-dimensional images is relatively inexpensive, leads to greater treatment adherence, and can reduce social anxiety. Further studies are needed to corroborate these findings.

Phase I, open-cycle absorption solar cooling. Part IV. Executive summary analysis and resolution of critical issues and recommendations for Phase II. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, B.D.

The objective of this project is to advance lower cost solar cooling technology with the feasibility analysis, design and evaluation of proof-of-concept open cycle solar cooling concepts. The work is divided into three phases, with planned completion of each phase before proceeding with the following phase: Phase I - performance/economic/environmental related analysis and exploratory studies; Phase II - design and construction of an experimental system, including evaluative testing; Phase III - extended system testing during operation and engineering modifications as required. For Phase I, analysis and resolution of critical issues were completed with the objective of developing design specifications formore » an improved prototype OCA system.« less

Design and testing of a rotational brake with shear thickening fluids

NASA Astrophysics Data System (ADS)

Tian, Tongfei; Nakano, Masami

2017-03-01

A rotational brake working with shear thickening fluid (STF) was designed and tested in this study. With the optimisation in design, most of the STF in the brake can receive the same shear rate when the brake rotates. The parts of this brake were fabricated with a 3D printer and then assembled manually. Three types of STFs with various carrier fluids and different particles were fabricated and tested with a rheometer. Then the brake with each STF was separately tested with the rheometer. The estimated and measured torques as a function of the angular velocity fit each other well. The stability of the rotational STF brake was investigated in repeated tests, which proved the function of the brake for a long time.

Novel solid protein solder designs for laser-assisted tissue repair.

PubMed

McNally, K M; Sorg, B S; Welch, A J

2000-01-01

Previous studies have shown that the application of chromophore-enhanced albumin protein solders to augment laser tissue repairs significantly improves repair strength, enhances edge co-optation, and reduces thermal tissue injury. These investigations are furthered with this in vitro study conducted to assess a new range of specially designed chromophore-enhanced solid protein solders manufactured and tested for application during laser-assisted tissue repair. The experimental study was divided into three parts. In the first part of the study, the creation of a chromophore concentration gradient across the thickness of the solid protein solder was investigated as a means to improve control of the heat source gradient through the solder during laser irradiation. In the second part of the study, predenaturation of the solid protein solder was investigated as a means for enhancing the stability of the solder in physiological fluids before irradiation. Finally, in the third part of the study, the feasibility of using synthetic polymers as a scaffold for traditional albumin protein solder mixes was investigated as a means of improving the flexibility of the solder. Uniform denaturation across the thickness of the solder was achieved by controlling the chromophore concentration gradient, thus ensuring stable solder-tissue fusion when the specimen was submerged in a hydrated environment. Predenaturation of the solid protein solder significantly reduced the solubility of the solder, and consequently, improved the handling characteristics of the solder. The solder-doped polymer membranes were flexible enough to be wrapped around tissue, whereas their solid nature avoided problems associated with "runaway" of the less viscous liquid solders currently used by researchers. In addition, the solder-doped polymer membranes could be easily tailored to a wide range of geometries suitable to many clinical applications. The novel solid protein solder designs presented here add a new dimension to tissue repair as their flexible, moldable, and absorption controllable nature, greatly improves the clinical applicability of laser-assisted tissue repair. Copyright 2000 Wiley-Liss, Inc.

Steroidal hormones and other endocrine active compounds in shallow groundwater in nonagricultural areas of Minnesota—Study design, methods, and data, 2009–10

USGS Publications Warehouse

Erickson, Melinda L.

2012-01-01

The U.S. Geological Survey, in cooperation with the Minnesota Pollution Control Agency, completed a study on the occurrence of steroidal hormones and other endocrine active compounds in shallow groundwater in nonagricultural areas of Minnesota during 2009–10. This report describes the study design and methods, and presents the data collected on steroidal hormones and other related compounds. Environmental and quality-control samples were collected from 40 wells as part of this study. Samples were analyzed by the U.S. Geological Survey National Water Quality Laboratory for 16 steroidal hormones and 4 other related compounds, of which all but 2 compounds are endocrine active compounds. Most of the water samples did not contain detectable concentrations of any of the 20 compounds analyzed. Water samples from three wells had detectable concentrations of one or more compounds. Bisphenol A was detected in samples from three wells, and trans-diethylstilbestrol was detected in one of the samples in which bisphenol A also was detected.

Model building techniques for analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walther, Howard P.; McDaniel, Karen Lynn; Keener, Donald

2009-09-01

The practice of mechanical engineering for product development has evolved into a complex activity that requires a team of specialists for success. Sandia National Laboratories (SNL) has product engineers, mechanical designers, design engineers, manufacturing engineers, mechanical analysts and experimentalists, qualification engineers, and others that contribute through product realization teams to develop new mechanical hardware. The goal of SNL's Design Group is to change product development by enabling design teams to collaborate within a virtual model-based environment whereby analysis is used to guide design decisions. Computer-aided design (CAD) models using PTC's Pro/ENGINEER software tools are heavily relied upon in the productmore » definition stage of parts and assemblies at SNL. The three-dimensional CAD solid model acts as the design solid model that is filled with all of the detailed design definition needed to manufacture the parts. Analysis is an important part of the product development process. The CAD design solid model (DSM) is the foundation for the creation of the analysis solid model (ASM). Creating an ASM from the DSM currently is a time-consuming effort; the turnaround time for results of a design needs to be decreased to have an impact on the overall product development. This effort can be decreased immensely through simple Pro/ENGINEER modeling techniques that summarize to the method features are created in a part model. This document contains recommended modeling techniques that increase the efficiency of the creation of the ASM from the DSM.« less

Design and characterization of a three-terminal transcriptional device through polymerase per second.

PubMed

Varadarajan, Prasanna Amur; Del Vecchio, Domitilla

2009-09-01

In this paper, we provide an in silico input-output characterization of a three-terminal transcriptional device employing polymerase per second (PoPS) as input and output. The device is assembled from well-characterized parts of the bacteriophage lambda switch transcriptional circuit. We draw the analogy between voltage and protein concentration and between current and PoPS to demonstrate that the characteristics of the three-terminal transcriptional device are qualitatively similar to those of a bipolar junction transistor (BJT). In particular, as it occurs in a BJT, the device can be tuned to operate either as a linear amplifier or as a switch. When the device operates as a linear amplifier, gains of twofolds can be obtained, which are considerably smaller than those obtained in a BJT (in which 100-fold amplification gains can be reached). This fact suggests that the parts extracted from natural transcriptional systems may be naturally designed mostly to process and store information as opposed to amplify signals.

Electric Utility Rate Design Study: reference manual and procedures for implementing PURPA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

State regulatory commissions will be assisted by using this manual in carrying out their responsibilities under the National Energy Act, specifically under the Public Utilities Regulatory Policies Act (PURPA). The research and materials of the Rate Design Study are basically applicable to Title I of PURPA, and the Manual covers only that part of the Act. The Rate Design Study covers a wide scope of research and professional opinions and are a major reference source for data, information, and divergent views on practically every aspect of electric utility rate design. The introductory part calls attention to particularly important aspects ofmore » responsibilities, authority, and procedures. The second part outlines the specific responsibilities placed by Title I of PURPA on the State commissions. Part 3 discusses some of the procedural and substantive requirements and options of PURPA with particular emphasis on their relation to the Rate Design Study, State law, and State regulatory policies. Part 4 is an independent analysis that includes cross-indexed references to the more than 60 reports prepared by the Rate Design Study and also to other pertinent sources of information and data. Part 5 summarizes a survey conducted in January 1979 of State commission actions related to the matters contained in Title I of PURPA. Part 6 presents the text of the law. Part 7 is the request from NARUC that prompted the preparation of the Manual. (MCW)« less

BMSW - Fast Solar Wind Monitor - three years in orbit: Status and prospects

NASA Astrophysics Data System (ADS)

Prech, Lubomir; Zastenker, Georgy; Nemecek, Zdenek; Safrankova, Jana; Vaverka, Jakub; Cermak, Ivo; Chesalin, Lev S.; Gavrilova, Elena

Fast Solar Wind Monitor BMSW is an instrument flown as a part of the PLASMA-F complex onboard the Russian Spektr-R radioastronomical spacecraft. The spacecraft was launched on July 18, 2011. During the COSPAR-2014 Assembly meeting, the instrument is supposed to celebrate three successful years in operation. With a set of 6 Faraday’s cups, the instrument has a unique time resolution --- 0.5--1 s for a full energy spectrum (96 energy steps) and 31~ms for basic solar wind plasma parameters directing the instrument to study of fast solar wind discontinuities including interplanetary shocks, a fast variability of proton and alpha particle parameters, and to study of solar wind turbulence up to the ion kinetic scales. The measurement technique, its implementation, and ground data processing are discussed in the contribution. The performance of the instrument design and electronics are presented. We discuss heritage of this instrument utilized in design of future instruments being prepared for the further projects as Luna-Glob.

Kinematic analysis of the finger exoskeleton using MATLAB/Simulink.

PubMed

Nasiłowski, Krzysztof; Awrejcewicz, Jan; Lewandowski, Donat

2014-01-01

A paralyzed and not fully functional part of human body can be supported by the properly designed exoskeleton system with motoric abilities. It can help in rehabilitation, or movement of a disabled/paralyzed limb. Both suitably selected geometry and specialized software are studied applying the MATLAB environment. A finger exoskeleton was the base for MATLAB/Simulink model. Specialized software, such as MATLAB/Simulink give us an opportunity to optimize calculation reaching precise results, which help in next steps of design process. The calculations carried out yield information regarding movement relation between three functionally connected actuators and showed distance and velocity changes during the whole simulation time.

Advanced automated glass cockpit certification: Being wary of human factors

NASA Technical Reports Server (NTRS)

Amalberti, Rene; Wilbaux, Florence

1994-01-01

This paper presents some facets of the French experience with human factors in the process of certification of advanced automated cockpits. Three types of difficulties are described: first, the difficulties concerning the hotly debated concept of human error and its non-linear relationship to risk of accident; a typology of errors to be taken into account in the certification process is put forward to respond to this issue. Next, the difficulties connected to the basically gradual and evolving nature of pilot expertise on a given type of aircraft, which contrasts with the immediate and definitive style of certifying systems. The last difficulties to be considered are those related to the goals of certification itself on these new aircraft and the status of findings from human factor analyses (in particular, what should be done with disappointing results, how much can the changes induced by human factors investigation economically affect aircraft design, how many errors do we need to accumulate before we revise the system, what should be remedied when human factor problems are discovered at the certification stage: the machine? pilot training? the rules? or everything?). The growth of advanced-automated glass cockpits has forced the international aeronautical community to pay more attention to human factors during the design phase, the certification phase and pilot training. The recent creation of a human factor desk at the DGAC-SFACT (Official French services) is a direct consequence of this. The paper is divided into three parts. Part one debates human error and its relationship with system design and accident risk. Part two describes difficulties connected to the basically gradual and evolving nature of pilot expertise on a given type of aircraft, which contrasts with the immediate and definitive style of certifying systems. Part three focuses on concrete outcomes of human factors for certification purposes.

50 kW on-site concentrating solar photovoltaic power system. Phase I: design. Final report, 1 June 1978-28 February 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pittman, P F

1979-03-30

This contract is part of a three phase program to design, fabricate, and operate a solar photovoltaic electric power system with concentrating optics. The system will be located beside a Local Operating Headquarters of the Georgia Power Company in Atlanta, Georgia and will provide part of the power for the on-site load. Fresnel lens concentrators will be used in 2-axis tracking arrays to focus solar energy onto silicon solar cells producing a peak power output of 56 kW. The present contract covers Phase I which has as its objective the complete design of the system and necessary subsystems.

Intelligent interface design and evaluation

NASA Technical Reports Server (NTRS)

Greitzer, Frank L.

1988-01-01

Intelligent interface concepts and systematic approaches to assessing their functionality are discussed. Four general features of intelligent interfaces are described: interaction efficiency, subtask automation, context sensitivity, and use of an appropriate design metaphor. Three evaluation methods are discussed: Functional Analysis, Part-Task Evaluation, and Operational Testing. Design and evaluation concepts are illustrated with examples from a prototype expert system interface for environmental control and life support systems for manned space platforms.

Identifying components in consent information needed to support informed decision making about trial participation: An interview study with women managing cancer.

PubMed

Abhyankar, Purva; Velikova, Galina; Summers, Barbara; Bekker, Hilary L

2016-07-01

Research governance requires patients give informed consent to participate in clinical trials. However, there are concerns that consent information may not support patient participation decisions. This study investigates the utility of consent information in supporting women's trial participation decisions when receiving treatment for cancer. An interview study with women receiving cancer treatments at a medical oncology outpatient clinic in Yorkshire (UK). All women over 18 years, not admitted to a hospital ward and who had currently or previously been invited to take part in a trial were invited to take part in the study over a three month period. Interviews were audio-tape recorded, transcribed and analysed using thematic analysis. Of those eligible (n = 41), 21 women with breast (n = 11), ovarian (n = 8) and endometrial (n = 2) cancer participated (mean age = 57 years). Eighteen had made at least one trial decision and three were considering taking part in a trial. Findings are synthesised under two analytical themes: 1) Influence of the cancer and cancer treatment context on decision making for trial participation; and 2) Experiences of the consenting process and their influence on decision making. Designing trial information to represent explicitly the trial participation decision as being between standard care and study-related care options is more likely to effectively support patients in making informed decisions between standard care treatments and taking part in a trial. Copyright © 2016 Elsevier Ltd. All rights reserved.

Specially designed sweeteners and food for diabetics--a real need?

PubMed

Lenner, R A

1976-07-01

In the first part of this study, the effect of four isocaloric mixed breakfast meals on the blood glucose and urinary glucose losses was tested in nine adult diabetics and in three healthy subjects, ages 60 to 75. Three of the test meals consisted of a base diet supplemented with applesauce sweetened with sucrose, fructose, or sorbitol. In the fourth test meal, the starch was increased together with saccharine. In the second part of the study, analyses for free glucose and sucrose in several timed food preparations, ordinary as well as food preparations specially designed for diabetics, were performed. The amount of sucrose equivalents (S(eg)) in one ordinary serving of the various products was estimated. No significant differences among sucrose, fructose, and sorbitol-containing meals with respect to the effect on the blood glucose level or on glucosuria were found. The saccharine-containing meal gave a significantly greater blood glucose increase at 60 min only. The amount of sucrose in ordinary marinated foods, such as herring, cucumber, and common beet was negligible. Water-packed fruits supplied one half of the amount of S(eq) or less, compared with fruits packed in sorbitol-sweetened syrup. The amount of S(eq) in the latter products as well as in fruits packed in unsweetened juice equalled that of the fleshy substance of ordinary sucrose-sweetened products. It was concluded that fructose or sorbitol has no advantages over sucrose, as regards the effect on blood glucose in well-regulated adult diabetics, and that it seems unnecessary to have specially sweetened foods designed for diabetics.

Paving fabrics for reducing reflective cracking

DOT National Transportation Integrated Search

1991-11-01

This research effort was part of ADOT's New Product Evaluation Program. The objective was to evaluate the construction and field performances of three commercially available paving fabrics; Paveprep, Glassgrid, and Tapecoat. The fabrics were designed...

Advanced composites wing study program, volume 2

NASA Technical Reports Server (NTRS)

Harvey, S. T.; Michaelson, G. L.

1978-01-01

The study on utilization of advanced composites in commercial aircraft wing structures was conducted as a part of the NASA Aircraft Energy Efficiency Program to establish, by the mid-1980s, the technology for the design of a subsonic commercial transport aircraft leading to a 40% fuel savings. The study objective was to develop a plan to define the effort needed to support a production commitment for the extensive use of composite materials in wings of new generation aircraft that will enter service in the 1985-1990 time period. Identification and analysis of what was needed to meet the above plan requirements resulted in a program plan consisting of three key development areas: (1) technology development; (2) production capability development; and (3) integration and validation by designing, building, and testing major development hardware.

Evaluating Different Green School Building Designs for Albania: Indoor Thermal Comfort, Energy Use Analysis with Solar Systems

NASA Astrophysics Data System (ADS)

Dalvi, Ambalika Rajendra

Improving the conditions of schools in many parts of the world is gradually acquiring importance. The Green School movement is an integral part of this effort since it aims at improving indoor environmental conditions. This would in turn, enhance student- learning while minimizing adverse environmental impact through energy efficiency of comfort-related HVAC and lighting systems. This research, which is a part of a larger research project, aims at evaluating different school building designs in Albania in terms of energy use and indoor thermal comfort, and identify energy efficient options of existing schools. We start by identifying three different climate zones in Albania; Coastal (Durres), Hill/Pre-mountainous (Tirana), mountainous (Korca). Next, two prototypical school building designs are identified from the existing stock. Numerous scenarios are then identified for analysis which consists of combinations of climate zone, building type, building orientation, building upgrade levels, presence of renewable energy systems (solar photovoltaic and solar water heater). The existing building layouts, initially outlined in CAD software and then imported into a detailed building energy software program (eQuest) to perform annual simulations for all scenarios. The research also predicted indoor thermal comfort conditions of the various scenarios on the premise that windows could be opened to provide natural ventilation cooling when appropriate. This study also estimated the energy generated from solar photovoltaic systems and solar water heater systems when placed on the available roof area to determine the extent to which they are able to meet the required electric loads (plug and lights) and building heating loads respectively. The results showed that there is adequate indoor comfort without the need for mechanical cooling for the three climate zones, and that only heating is needed during the winter months.

Using Symmetric Predication of Endogenous Subgroups for Causal Inferences about Program Effects under Robust Assumptions: Part Two of a Method Note in Three Parts

ERIC Educational Resources Information Center

Bell, Stephen H.; Peck, Laura R.

2013-01-01

To answer "what works?" questions about policy interventions based on an experimental design, Peck (2003) proposes to use baseline characteristics to symmetrically divide treatment and control group members into subgroups defined by endogenously determined postrandom assignment events. Symmetric prediction of these subgroups in both…

Confronting Substance Abuse: A Teacher's Guide.

ERIC Educational Resources Information Center

Boundy, Donna; Cochran, Kathleen Mayo; Miller, Robert A.; Rothbart, Betty

This packet is designed to be used by teachers in middle schools and high schools as they teach drug education. It accompanies a public television series, "Moyers on Addiction: Close at Home," but can be used on its own. The materials are in three parts. The first part is a folder that explains how to use the materials, provides a list of…

Painting Services: An Instructor's Guide for a Program in Trade and Technical Education. Automotive Industries Occupations.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Occupational and Career Curriculum Development.

Designed to assist instructors in preparing secondary and adult students for employment in the field of auto damage correction, as automotive refinishers, this guide outlines six units of instruction. (It was developed as one part of a three-part, 2-year course in auto damage correction: Body services, frame services, and painting services.) The…

Towpaths to Oblivion. The Middlesex Canal and the Coming of the Railroad 1792-1853.

ERIC Educational Resources Information Center

Holmes, Cary W.

This narrative history of the Middlesex Canal from 1792-1853 is designed to be used with "Canal," a role-playing, decision-making game found in SO 011 886. Economic, social, and political factors related to planning, building, and implementing the canal are considered. The document is presented in three parts. Part I states reasons for…

Universal Tool Grinder Operator Instructor's Guide. Part of Single-Tool Skills Program Machine Industries Occupations.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Div. of Curriculum Development.

The document is an instructor's guide for a course on universal tool grinder operation. The course is designed to train people in making complicated machine setups and precision in the grinding operations and, although intended primarily for adult learners, it can be adapted for high school use. The guide is divided into three parts: (1) the…

Literature review for Texas Department of Transportation Research Project 0-4695: Guidance for design in areas of extreme bed-load mobility, Edwards Plateau, Texas

USGS Publications Warehouse

Heitmuller, Franklin T.; Asquith, William H.; Fang, Xing; Thompson, David B.; Wang, Keh-Han

2005-01-01

A review of the literature addressing sediment transport in gravel-bed river systems and structures designed to control bed-load mobility is provided as part of Texas Department of Transportation research project 0–4695: Guidance for Design in Areas of Extreme Bed-Load Mobility. The study area comprises the western half of the Edwards Plateau in central Texas. Three primary foci of the literature review are journal articles, edited volumes, and government publications. Major themes within the body of literature include deterministic sediment transport theory and equations, development of methods to measure and analyze fluvial sediment, applications and development of theory in natural channels and flume experiments, and recommendations for river management and structural design. The literature review provides an outline and foundation for the research project to characterize extreme bed-load mobility in rivers and streams across the study area. The literature review also provides a basis upon which potential modifications to low-water stream-crossing design in the study area can be made.

Simulations and Experiments of Hot Forging Design and Evaluation of the Aircraft Landing Gear Barrel Al Alloy Structure

NASA Astrophysics Data System (ADS)

Ram Prabhu, T.

2016-04-01

In the present study, the hot forging design of a typical landing gear barrel was evolved using finite element simulations and validated with experiments. A DEFORM3D software was used to evolve the forging steps to obtain the sound quality part free of defects with minimum press force requirements. The hot forging trial of a barrel structure was carried out in a 30 MN hydraulic press based on the simulation outputs. The tensile properties of the part were evaluated by taking samples from all three orientations (longitudinal, long transverse, short transverse). The hardness and microstructure of the part were also investigated. To study the soundness of the product, fluorescent penetrant inspection and ultrasonic testing were performed in order to identify any potential surface or internal defects in the part. From experiments, it was found that the part was formed successfully without any forging defects such as under filling, laps, or folds that validated the effectiveness of the process simulation. The tensile properties of the part were well above the specification limit (>10%) and the properties variation with respect to the orientation was less than 2.5%. The part has qualified the surface defects level of Mil Std 1907 Grade C and the internal defects level of AMS 2630 Class A (2 mm FBh). The microstructure shows mean grain length and width of 167 and 66 µm in the longitudinal direction. However, microstructure results revealed that the coarse grain structure was observed on the flat surface near the lug region due to the dead zone formation. An innovative and simple method of milling the surface layer after each pressing operation was applied to solve the problem of the surface coarse grain structure.

Human Factors in Virtual Reality Development

NASA Technical Reports Server (NTRS)

Kaiser, Mary K.; Proffitt, Dennis R.; Null, Cynthia H. (Technical Monitor)

1995-01-01

This half-day tutorial will provide an overview of basic perceptual functioning as it relates to the design of virtual environment systems. The tutorial consists of three parts. First, basic issues in visual perception will be presented, including discussions of the visual sensations of brightness and color, and the visual perception of depth relationships in three-dimensional space (with a special emphasis on motion -specified depth). The second section will discuss the importance of conducting human-factors user studies and evaluations. Examples and suggestions on how best to get help with user studies will be provided. Finally, we will discuss how, by drawing on their complementary competencies, perceptual psychologists and computer engineers can work as a team to develop optimal VR systems, technologies, and techniques.

A three-axis force sensor for dual finger haptic interfaces.

PubMed

Fontana, Marco; Marcheschi, Simone; Salsedo, Fabio; Bergamasco, Massimo

2012-10-10

In this work we present the design process, the characterization and testing of a novel three-axis mechanical force sensor. This sensor is optimized for use in closed-loop force control of haptic devices with three degrees of freedom. In particular the sensor has been conceived for integration with a dual finger haptic interface that aims at simulating forces that occur during grasping and surface exploration. The sensing spring structure has been purposely designed in order to match force and layout specifications for the application. In this paper the design of the sensor is presented, starting from an analytic model that describes the characteristic matrix of the sensor. A procedure for designing an optimal overload protection mechanism is proposed. In the last part of the paper the authors describe the experimental characterization and the integrated test on a haptic hand exoskeleton showing the improvements in the controller performances provided by the inclusion of the force sensor.

On processing development for fabrication of fiber reinforced composite, part 2

NASA Technical Reports Server (NTRS)

Hou, Tan-Hung; Hou, Gene J. W.; Sheen, Jeen S.

1989-01-01

Fiber-reinforced composite laminates are used in many aerospace and automobile applications. The magnitudes and durations of the cure temperature and the cure pressure applied during the curing process have significant consequences for the performance of the finished product. The objective of this study is to exploit the potential of applying the optimization technique to the cure cycle design. Using the compression molding of a filled polyester sheet molding compound (SMC) as an example, a unified Computer Aided Design (CAD) methodology, consisting of three uncoupled modules, (i.e., optimization, analysis and sensitivity calculations), is developed to systematically generate optimal cure cycle designs. Various optimization formulations for the cure cycle design are investigated. The uniformities in the distributions of the temperature and the degree with those resulting from conventional isothermal processing conditions with pre-warmed platens. Recommendations with regards to further research in the computerization of the cure cycle design are also addressed.

Designing and Implementing an "Intelligent" Multimedia Tutoring System for Repair Tasks: Final Report.

ERIC Educational Resources Information Center

Baggett, Patricia

1989-01-01

The first part of this document is the final report of a research project (1984-1989) on designing and implementing an intelligent multimedia tutoring system for repair tasks. The problem/goal and approach, equipment and implementation, experimental work, and results are discussed for three phases of research: (1) developing and testing an…

Designing New Academic Pathways: Reimaging the Community College Experience with Students' Needs and Best Interests at Heart

ERIC Educational Resources Information Center

McClenney, Kay; Dare, Donna

2013-01-01

This is the second article in a three-part series on reimagining the community college student experience, describing a new model for academic pathways, key design principles, examples from colleges leading the way, and implementation challenges. Community colleges are beginning to embrace the task of reimagining students' educational experiences.…

40 CFR Appendix I to Part 60 - Removable Label and Owner's Manual

Code of Federal Regulations, 2014 CFR

2014-07-01

... various label types that may apply. 2.2 Certified Wood Heaters The design and content of certified wood... three variables listed above. Figures 1 and 2 illustrate the variations in label design. Figure 1 is a... general layout, the type font and type size illustrated in Figures 1 and 2. 2.2.1 Identification and...

40 CFR Appendix I to Part 60 - Removable Label and Owner's Manual

Code of Federal Regulations, 2012 CFR

2012-07-01

... various label types that may apply. 2.2 Certified Wood Heaters The design and content of certified wood... three variables listed above. Figures 1 and 2 illustrate the variations in label design. Figure 1 is a... general layout, the type font and type size illustrated in Figures 1 and 2. 2.2.1Identification and...

40 CFR Appendix I to Part 60 - Removable Label and Owner's Manual

Code of Federal Regulations, 2013 CFR

2013-07-01

... various label types that may apply. 2.2 Certified Wood Heaters The design and content of certified wood... three variables listed above. Figures 1 and 2 illustrate the variations in label design. Figure 1 is a... general layout, the type font and type size illustrated in Figures 1 and 2. 2.2.1Identification and...

Elements of a modern turbomachinery design system

NASA Astrophysics Data System (ADS)

Jennions, Ian K.

1994-05-01

The aerodynamic design system at GE Aircraft Engines (GEAE) consists of many parts: throughflow, secondary flow, geometry generators, blade-to-blade and fully three-dimensional (3D) analysis. This paper describes each of these elements and discusses optimization and computer architecture issues. Emphasis is placed on those areas in which the company is thought to have special capability.

Working Collectively to Design Online Teacher Education Curriculum: How Do Teacher Educators Manage to Do It?

ERIC Educational Resources Information Center

Milewski, Amanda; Gürsel, Umut; Herbst, Patricio

2017-01-01

This paper is part of a three-year inquiry that supports and investigates the work of groups of mathematics teacher educators using technological tools to design and implement multimedia practice-based teacher education curriculum materials. This paper describes the kinds of activities, interactions, and tools used by mathematics teacher educators…

From Desire to Data: How JLab's Experimental Program Evolved Part 2: The Painstaking Transition to Concrete Plans, Mid-1980s to 1990

NASA Astrophysics Data System (ADS)

Westfall, Catherine

2018-03-01

This is the second in a three-part article describing the development of the Thomas Jefferson National Accelerator Facility's experimental program, from the first dreams of incisive electromagnetic probes into the structure of the nucleus through the era in which equipment was designed and constructed and a program crafted so that the long-desired experiments could begin. These developments unfolded against the backdrop of the rise of the more bureaucratic New Big Science and the intellectual tumult that grew from increasing understanding and interest in quark-level physics. Part 2, presented here, focuses on the period from 1986 to 1990. During this period of revolutionary change, laboratory personnel, potential users, and DOE officials labored to proceed from the 1986 laboratory design report, which included detailed accelerator plans and very preliminary experimental equipment sketches, to an approved 1990 experimental equipment conceptual design report, which provided designs complete enough for the onset of experimental equipment construction.

Flat-Passband 3 × 3 Interleaving Filter Designed With Optical Directional Couplers in Lattice Structure

NASA Astrophysics Data System (ADS)

Wang, Qi Jie; Zhang, Ying; Soh, Yeng Chai

2005-12-01

This paper presents a novel lattice optical delay-line circuit using 3 × 3 directional couplers to implement three-port optical interleaving filters. It is shown that the proposed circuit can deliver three channels of 2pi/3 phase-shifted interleaving transmission spectra if the coupling ratios of the last two directional couplers are selected appropriately. The other performance requirements of an optical interleaver can be achieved by designing the remaining part of the lattice circuit. A recursive synthesis design algorithm is developed to calculate the design parameters of the lattice circuit that will yield the desired filter response. As illustrative examples, interleavers with maximally flat-top passband transmission and with given transmission performance on passband ripples and passband bandwidth, respectively, are designed to verify the effectiveness of the proposed design scheme.

Simulation and Study of High Workload Operations

DTIC Science & Technology

1974-04-25

way to proceed. Inviting a test pilot to confess he cannot meet a challenge, or a line pilot to admit he is overpaid, is asking for more than verbal...part of the aaalyais looked for differences hstaaea the subjects. Using buskal Msllis one-way analysis of variance tests these ware found to be present...however, recog- nised that the three flights were intentionally designed to be markedly different from one another, and it remains to test the

A Study to Determine the Extent of Social Support and Burnout among Nurses at Womack Army Community Hospital

DTIC Science & Technology

1986-07-01

Maslach Burnout Inventory (MBI) 15 Comparison of Means and Standard Deviations for the Social Support Subscales 16... Maslach and Jackson followed closely their definition of burnout and designed the Maslach Burnout Inventory to assess the three aspects of the syndrome...34, "How many employees report to you?", etc. Part II: Maslach’s Burnout Inventory (MBI). This measure was developed by Christina A. Maslach and

The Relationship between the Comprehensiveness of a School System's Eighth to Ninth Grade Transition Process and the Degree of Trust Shared by Middle-School Principals and High-School Principals

ERIC Educational Resources Information Center

McMorran, Thomas

2012-01-01

The purpose for this study was to determine what is the relationship between the degree of trust that the principals of middle schools and high schools invest in each other and the comprehensiveness of their eighth-to-ninth grade transition programs. Data were gathered through the administration of a three-part survey designed to collect…

Three-dimensional finite element analysis of the application of attachment for obturator framework in unilateral maxillary defect.

PubMed

Sun, J; Jiao, T; Tie, Y; Wang, D-M

2008-09-01

The aim of this study was to evaluate the stress on the abutment teeth and framework ina unilateral maxillary defect which was restored by an obturator retained by resin-bonded extra coronal attachment. A three-dimensional finite element model of the human unilateral maxillary defect was constructed. Traditional obturator framework with four casting circumferential clasp was established (model 1). A continuous lingual guide plane of 0.5 mm thickness on all of the remaining teeth, with Mini-SG/F attachment on the mesial surface of the central incisor was also established (model 2). The modelling and analytical processes were performed using the ANSYS technologies. Stress was transmitted to the anterior part of the palate, with stress values being lower on the anterior teeth compared with the posteriors. The highest stress value of model 1 and model 2 was 13.1 Mpa, 19.9 Mpa respectively. Stress concentrations were found at the junction of the attachment to the lingual guide plane and the anterior part of the lingual plane. The results of this study suggest that the application of a resin-bonded extra coronal attachment for obturator retention is in accordance with the design principles for the restorative treatment of maxillary defects.The design of the attachment framework needs to be further investigated. Benefit can be gained by splinting the abutment teeth.

Synchrotron X-ray CT characterization of titanium parts fabricated by additive manufacturing. Part II. Defects.

PubMed

Scarlett, Nicola Vivienne Yorke; Tyson, Peter; Fraser, Darren; Mayo, Sheridan; Maksimenko, Anton

2016-07-01

Synchrotron X-ray tomography (SXRT) has been applied to the study of defects within three-dimensional printed titanium parts. These parts were made using the Arcam EBM(®) (electron beam melting) process which uses powdered titanium alloy, Ti64 (Ti alloy with approximately 6%Al and 4%V) as the feed and an electron beam for the sintering/welding. The experiment was conducted on the Imaging and Medical Beamline of the Australian Synchrotron. The samples represent a selection of complex shapes with a variety of internal morphologies. Inspection via SXRT has revealed a number of defects which may not otherwise have been seen. The location and nature of such defects combined with detailed knowledge of the process conditions can contribute to understanding the interplay between design and manufacturing strategy. This fundamental understanding may subsequently be incorporated into process modelling, prediction of properties and the development of robust methodologies for the production of defect-free parts.

Decomposition of Magnetic Field Boundary Conditions into Parts Produced by Internal and External Sources

NASA Astrophysics Data System (ADS)

Lazanja, David; Boozer, Allen

2006-10-01

Given the total magnetic field on a toroidal plasma surface, a method for decomposing the field into a part due to internal currents (often the plasma) and a part due to external currents is presented. The method exploits Laplace theory which is valid in the vacuum region between the plasma surface and the chamber walls. The method is developed for the full three dimensional case which is necessary for studying stellarator plasma configurations. A change in the plasma shape is produced by the total normal field perturbation on the plasma surface. This method allows a separation of the total normal field perturbation into a part produced by external currents and a part produced by the plasma response. There are immediate applications to coil design. The computational procedure is based on Merkel's 1986 work on vacuum field computations. Several test cases are presented for toroidal surfaces which verify the method and computational robustness of the code.

Three-Tiered Models of Prevention: Teacher Efficacy and Burnout

ERIC Educational Resources Information Center

Oakes, Wendy Peia; Lane, Kathleen Lynne; Jenkins, Abbie; Booker, Belle B.

2013-01-01

Project Persevere examined teacher efficacy and burnout within Comprehensive, Integrated, Three-tiered (CI3T) models of prevention, as implemented in two middle schools in a southern state. Participating schools completed a year-long training series to design their CI3T plans and were in their first year of implementation as part of regular school…

40 CFR 63.11623 - What are the testing requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

...? (a) If you are demonstrating that the cyclone required by § 63.11621(e) is designed to reduce... A to part 60 to determine the particulate matter mass rate at the inlet and outlet of the cyclone. You must conduct at least three runs at the cyclone inlet and three runs at the cyclone outlet. Each...

40 CFR 63.11623 - What are the testing requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

...? (a) If you are demonstrating that the cyclone required by § 63.11621(e) is designed to reduce... A to part 60 to determine the particulate matter mass rate at the inlet and outlet of the cyclone. You must conduct at least three runs at the cyclone inlet and three runs at the cyclone outlet. Each...

Growing: Birth to Three. Piecing It All Together.

ERIC Educational Resources Information Center

Doan-Sampon, Mary Anne; And Others

This guide is one part of a set of materials designed to support an ecological intervention system for families and their special needs children between birth and three. The system is constructed on four premises: (1) intervention is guided by the family; (2) parent-child interactions are the heart of early intervention; (3) family rituals, daily…

A machine for the preliminary investigation of design features influencing the wear behaviour of knee prostheses.

PubMed

McGloughlin, T M; Murphy, D M; Kavanagh, A G

2004-01-01

Degradation of tibial inserts in vivo has been found to be multifactorial in nature, resulting in a complex interaction of many variables. A range of kinematic conditions occurs at the tibio-femoral interface, giving rise to various degrees of rolling and sliding at this interface. The movement of the tibio-femoral contact point may be an influential factor in the overall wear of ultra-high molecular weight polyethylene (UHMWPE) tibial components. As part of this study a three-station wear-test machine was designed and built to investigate the influence of rolling and sliding on the wear behaviour of specific design aspects of contemporary knee prostheses. Using the machine, it is possible to monitor the effect of various slide roll ratios on the performance of contemporary bearing designs from a geometrical and materials perspective.

The computerized OMAHA system in microsoft office excel.

PubMed

Lai, Xiaobin; Wong, Frances K Y; Zhang, Peiqiang; Leung, Carenx W Y; Lee, Lai H; Wong, Jessica S Y; Lo, Yim F; Ching, Shirley S Y

2014-01-01

The OMAHA System was adopted as the documentation system in an interventional study. To systematically record client care and facilitate data analysis, two Office Excel files were developed. The first Excel file (File A) was designed to record problems, care procedure, and outcomes for individual clients according to the OMAHA System. It was used by the intervention nurses in the study. The second Excel file (File B) was the summary of all clients that had been automatically extracted from File A. Data in File B can be analyzed directly in Excel or imported in PASW for further analysis. Both files have four parts to record basic information and the three parts of the OMAHA System. The computerized OMAHA System simplified the documentation procedure and facilitated the management and analysis of data.

KSC-07pd0711

NASA Image and Video Library

2007-03-16

VANDENBERG AIR FORCE BASE, CALIF. -- In a clean-room environment at North Vandenberg Air Force Base, technicians look at part of the AIM spacecraft. AIM will fly three instruments designed to study polar mesospheric clouds located at the edge of space, 50 miles above the Earth's surface in the coldest part of the planet's atmosphere. The mission's primary goal is to explain why these clouds form and what has caused them to become brighter and more numerous and appear at lower latitudes in recent years. AIM's results will provide the basis for the study of long-term variability in the mesospheric climate and its relationship to global climate change. AIM is scheduled to be mated to the Pegasus XL during the second week of April, after which final inspections will be conducted. Launch is scheduled for April 25.

Orbital Sciences Pegasus XL AIM Processing

NASA Image and Video Library

2007-03-17

In a clean-room environment at North Vandenberg Air Force Base, technicians look at part of the AIM spacecraft. AIM will fly three instruments designed to study polar mesospheric clouds located at the edge of space, 50 miles above the Earth's surface in the coldest part of the planet's atmosphere. The mission's primary goal is to explain why these clouds form and what has caused them to become brighter and more numerous and appear at lower latitudes in recent years. AIM's results will provide the basis for the study of long-term variability in the mesospheric climate and its relationship to global climate change. AIM is scheduled to be mated to the Pegasus XL during the second week of April, after which final inspections will be conducted. Launch is scheduled for April 25.

Is three the magic number? The role of ergonomic principles in cross country comprehension of road traffic signs.

PubMed

Jamson, Samantha; Mrozek, Marco

2017-07-01

Road sign comprehension plays an important part in road safety management, particularly for those drivers who are travelling in an unfamiliar country. Previous research has established that comprehension can be improved if signs are designed to adhere to ergonomic principles. However, it may be difficult for sign designers to incorporate all the principles into a single sign and may thus have to make a judgement as to the most effective ones. This study surveyed drivers in three countries to ascertain their understanding of a range of road signs, each of which conformed in varying degrees and combinations to the ergonomic principles. We found that using three of the principles was the most effective and that the most important one was that relating to standardisation; the colours and shapes used were key to comprehension. Other concepts which related to physical and spatial characteristics were less important, whilst conceptual compatibility did not aid comprehension at all. Practitioner Summary: This study explores how road sign comprehension can be improved using ergonomic principles, with particular reference to cross-border drivers. It was found that comprehension can be improved significantly if standardisation is adhered to and if at least three principles are used.

Analog Design for Digital Deployment of a Serious Leadership Game

NASA Technical Reports Server (NTRS)

Maxwell, Nicholas; Lang, Tristan; Herman, Jeffrey L.; Phares, Richard

2012-01-01

This paper presents the design, development, and user testing of a leadership development simulation. The authors share lessons learned from using a design process for a board game to allow for quick and inexpensive revision cycles during the development of a serious leadership development game. The goal of this leadership simulation is to accelerate the development of leadership capacity in high-potential mid-level managers (GS-15 level) in a federal government agency. Simulation design included a mixed-method needs analysis, using both quantitative and qualitative approaches to determine organizational leadership needs. Eight design iterations were conducted, including three user testing phases. Three re-design iterations followed initial development, enabling game testing as part of comprehensive instructional events. Subsequent design, development and testing processes targeted digital application to a computer- and tablet-based environment. Recommendations include pros and cons of development and learner testing of an initial analog simulation prior to full digital simulation development.

Anisotropy of Photopolymer Parts Made by Digital Light Processing

PubMed Central

Monzón, Mario; Ortega, Zaida; Hernández, Alba; Paz, Rubén; Ortega, Fernando

2017-01-01

Digital light processing (DLP) is an accurate additive manufacturing (AM) technology suitable for producing micro-parts by photopolymerization. As most AM technologies, anisotropy of parts made by DLP is a key issue to deal with, taking into account that several operational factors modify this characteristic. Design for this technology and photopolymers becomes a challenge because the manufacturing process and post-processing strongly influence the mechanical properties of the part. This paper shows experimental work to demonstrate the particular behavior of parts made using DLP. Being different to any other AM technology, rules for design need to be adapted. Influence of build direction and post-curing process on final mechanical properties and anisotropy are reported and justified based on experimental data and theoretical simulation of bi-material parts formed by fully-cured resin and partially-cured resin. Three photopolymers were tested under different working conditions, concluding that post-curing can, in some cases, correct the anisotropy, mainly depending on the nature of photopolymer. PMID:28772426

A multi-channel isolated power supply in non-equipotential circuit

NASA Astrophysics Data System (ADS)

Li, Xiang; Zhao, Bo-Wen; Zhang, Yan-Chi; Xie, Da

2018-04-01

A multi-channel isolation power supply is designed for the problems of different MOSFET or IGBT in the non-equipotential circuit in this paper. It mainly includes the square wave generation circuit, the high-frequency transformer and the three-terminal stabilized circuit. The first part is used to generate the 24V square wave, and as the input of the magnetic ring transformer. In the second part, the magnetic ring transformer consists of one input and three outputs to realize multi-channel isolation output. The third part can output different potential and realize non-equal potential function through the three-terminal stabilized chip. In addition, the multi-channel isolation power source proposed in this paper is Small size, high reliability and low price, and it is convenient for power electronic switches that operate on multiple different potentials. Therefore, the research on power supply of power electronic circuit has practical significance.

Evaluation of geotechnical monitoring data from the ESF North Ramp Starter Tunnel, April 1994 to June 1995. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-11-01

This report presents the results of instrumentation measurements and observations made during construction of the North Ramp Starter Tunnel (NRST) of the Exploratory Studies Facility (ESF). The information in this report was developed as part of the Design Verification Study, Section 8.3.1.15.1.8 of the Yucca Mountain Site Characterization Plan (DOE 1988). The ESF is being constructed by the US Department of Energy (DOE) to evaluate the feasibility of locating a potential high-level nuclear waste repository on lands within and adjacent to the Nevada Test Site (NTS), Nye County, Nevada. The Design Verification Studies are performed to collect information during constructionmore » of the ESF that will be useful for design and construction of the potential repository. Four experiments make up the Design Verification Study: Evaluation of Mining Methods, Monitoring Drift Stability, Monitoring of Ground Support Systems, and The Air Quality and Ventilation Experiment. This report describes Sandia National Laboratories` (SNL) efforts in the first three of these experiments in the NRST.« less

Wind Tunnel Data Fusion and Immersive Visualization: A Case Study

NASA Technical Reports Server (NTRS)

Severance, Kurt; Brewster, Paul; Lazos, Barry; Keefe, Daniel

2001-01-01

This case study describes the process of fusing the data from several wind tunnel experiments into a single coherent visualization. Each experiment was conducted independently and was designed to explore different flow features around airplane landing gear. In the past, it would have been very difficult to correlate results from the different experiments. However, with a single 3-D visualization representing the fusion of the three experiments, significant insight into the composite flowfield was observed that would have been extremely difficult to obtain by studying its component parts. The results are even more compelling when viewed in an immersive environment.

Vibration of rotating-shaft design spindles with flexible bases

NASA Astrophysics Data System (ADS)

Tseng, Chaw-Wu

The purpose of this study is to demonstrate an accurate mathematical model predicting forced vibration of rotating-shaft HDD spindle motors with flexible stationary parts. The mathematical model consists of three parts: a rotating part, a stationary part, and bearings. The rotating part includes a flexible hub, a flexible shaft press-fit into the hub, and N elastic disks mounted on the hub. The stationary part can include motor bracket (stator), base casting, and top cover. The bearings under consideration can be ball bearings or hydrodynamic bearings (HDB). The rotating disks are modelled through the classical plate theory. The rotating part (except the disks) and the stationary part are modelled through finite element analyses (FEA). With mode shapes and natural frequencies obtained from FEA, the kinetic and potential energies of the rotating and stationary parts are formulated and discretized to compensate for the gyroscopic effects from rotation. Finally, use of Lagrange equation results in the equations of motion. To verify the mathematical model, frequency response functions are measured experimentally for an HDB spindle carrying two identical disks at motor and drive levels. Experimental measurements agree very well with theoretical predictions not only in resonance frequency but also in resonance amplitude.

ASC Tri-lab Co-design Level 2 Milestone Report 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hornung, Rich; Jones, Holger; Keasler, Jeff

2015-09-23

In 2015, the three Department of Energy (DOE) National Laboratories that make up the Advanced Sci- enti c Computing (ASC) Program (Sandia, Lawrence Livermore, and Los Alamos) collaboratively explored performance portability programming environments in the context of several ASC co-design proxy applica- tions as part of a tri-lab L2 milestone executed by the co-design teams at each laboratory. The programming environments that were studied included Kokkos (developed at Sandia), RAJA (LLNL), and Legion (Stan- ford University). The proxy apps studied included: miniAero, LULESH, CoMD, Kripke, and SNAP. These programming models and proxy-apps are described herein. Each lab focused on amore » particular combination of abstractions and proxy apps, with the goal of assessing performance portability using those. Performance portability was determined by: a) the ability to run a single application source code on multiple advanced architectures, b) comparing runtime performance between \

Which Tibial Tray Design Achieves Maximum Coverage and Ideal Rotation: Anatomic, Symmetric, or Asymmetric? An MRI-based study.

PubMed

Stulberg, S David; Goyal, Nitin

2015-10-01

Two goals of tibial tray placement in TKA are to maximize coverage and establish proper rotation. Our purpose was to utilize MRI information obtained as part of PSI planning to determine the impact of tibial tray design on the relationship between coverage and rotation. MR images for 100 consecutive knees were uploaded into PSI software. Preoperative planning software was used to evaluate 3 different tray designs: anatomic, symmetric, and asymmetric. Approximately equally good coverage was achieved with all three trays. However, the anatomic compared to symmetric/asymmetric trays required less malrotation (0.3° vs 3.0/2.4°; P < 0.001), with a higher proportion of cases within 5° of neutral (97% vs 73/77%; P < 0.001). In this study, the anatomic tibia optimized the relationship between coverage and rotation. Copyright © 2015 Elsevier Inc. All rights reserved.

Three-dimensional laser window formation

NASA Technical Reports Server (NTRS)

Verhoff, Vincent G.

1992-01-01

The NASA Lewis Research Center has developed and implemented a unique process for forming flawless three-dimensional laser windows. These windows represent a major part of specialized, nonintrusive laser data acquisition systems used in a variety of compressor and turbine research test facilities. This report discusses in detail the aspects of three-dimensional laser window formation. It focuses on the unique methodology and the peculiarities associated with the formation of these windows. Included in this discussion are the design criteria, bonding mediums, and evaluation testing for three-dimensional laser windows.

Tracking and data relay satellite system configuration and tradeoff study. Volume 4: TDRS system operation and control and telecommunications service system, part 1

NASA Technical Reports Server (NTRS)

1972-01-01

Major study areas treated in this volume are: 1) operations and control and 2) the telecommunication service system. The TDRS orbit selection, orbital deployment, ground station visibility, sequence of events from launch to final orbit position, and TDRS control center functions required for stationkeeping, repositioning, attitude control, and antenna pointing are briefly treated as part of the operations and control section. The last topic of this section concerns the operations required for efficiently providing the TDRSS user telecommunication services. The discussion treats functions of the GSFC control and data processing facility, ground station, and TDRS control center. The second major portion of this volume deals with the Telecommunication Service System (TSS) which consists of the ground station, TDRS communication equipment and the user transceiver. A summary of the requirements and objectives for the telecommunication services and a brief summary of the TSS capabilities is followed by communication system analysis, signal design, and equipment design. Finally, descriptions of the three TSS elements are presented.

Automatic design of synthetic gene circuits through mixed integer non-linear programming.

PubMed

Huynh, Linh; Kececioglu, John; Köppe, Matthias; Tagkopoulos, Ilias

2012-01-01

Automatic design of synthetic gene circuits poses a significant challenge to synthetic biology, primarily due to the complexity of biological systems, and the lack of rigorous optimization methods that can cope with the combinatorial explosion as the number of biological parts increases. Current optimization methods for synthetic gene design rely on heuristic algorithms that are usually not deterministic, deliver sub-optimal solutions, and provide no guaranties on convergence or error bounds. Here, we introduce an optimization framework for the problem of part selection in synthetic gene circuits that is based on mixed integer non-linear programming (MINLP), which is a deterministic method that finds the globally optimal solution and guarantees convergence in finite time. Given a synthetic gene circuit, a library of characterized parts, and user-defined constraints, our method can find the optimal selection of parts that satisfy the constraints and best approximates the objective function given by the user. We evaluated the proposed method in the design of three synthetic circuits (a toggle switch, a transcriptional cascade, and a band detector), with both experimentally constructed and synthetic promoter libraries. Scalability and robustness analysis shows that the proposed framework scales well with the library size and the solution space. The work described here is a step towards a unifying, realistic framework for the automated design of biological circuits.

Stories from History, Myth, and the Bible. Snite Museum of Art Gallery Guide. Parts 1-3.

ERIC Educational Resources Information Center

Matthias, Diana C. J.; Barrett, Jesse

This art education resource, designed for use in the Snite Museum of Art, may also be used with slides or reproductions. Black and white reproductions are included for each of the art works represented, along with title, artist, date, and media information. This three part gallery guide presents a brief synopsis of the stories narrated in the…

The Assessment of Business and Industry Needs; Phase II of Multi-County Assessment of Adult Needs Project (MAP).

ERIC Educational Resources Information Center

Ferguson, L. G.; And Others

In order to assess the felt needs and interests of the local population and business community relative to education and training, a survey was designed and implemented in the four-county area surrounding Waco, Texas. This volume, part two of a three part series, documents the work done in developing and conducting the business and industry…

The Assessment of Adult Needs; Phase I of Multi-County Assessment of Adult Needs Project (MAP).

ERIC Educational Resources Information Center

Ferguson, L. G.; And Others

In order to assess the felt needs and interests of the local population and business community relative to education and training, a survey was designed and implemented in the four-county area surrounding Waco, Texas. This volume, part one of a three part series documents the work done in developing and conducting the community needs assessment…

Consumer's Resource Handbook and A Suggested Teacher's Guide to the Consumer's Resource Handbook.

ERIC Educational Resources Information Center

Department of Transportation, Washington, DC.

The booklet is an informational and educational tool designed to help a consumer do three things: (1) to communicate more effectively with those who provide the products and services he or she buys; (2) to locate sources of help; and (3) to resolve complaints in the most effective manner. The booklet contains two major parts. Part 1, "How To…

Preference of the place of death among people of pune.

PubMed

Kulkarni, Priyadarshini; Kulkarni, Pradeep; Anavkar, Vrushali; Ghooi, Ravindra

2014-05-01

Provision of end-of-life care requires that we have adequate information about the preferred place of death in the population. Since no such study is reported in India, this study was taken up in and around Pune, a large cosmopolitan city. A questionnaire was designed in three parts and distributed among the people above the age of 18 in and around Pune. The questionnaire had three parts the first being a consent form, followed by one for collection of personal information and lastly questions specific to the subject matter. Filled forms were screened for inconsistencies, gaps of information and errors. The population survey was mixed, both urban and rural, men and women, educated and uneducated, young and old. Despite this heterogeneity, the results were consistent to the point that most of the people surveyed preferred home as the place of death. This preference cuts across all barriers, the only difference being that women had a stronger preference for home death compared to men. Helping people to die at their preferred place is a part of end-of-life care. Majority of people surveyed by us, prefer to die at home, where they are relatively more comfortable. Public and governmental policies should be directed toward facilitating home deaths.

Radiation protection design considerations for man in geosynchronous orbits

NASA Technical Reports Server (NTRS)

Rossi, M. L.; Stauber, M. C.

1977-01-01

A description is presented of preliminary studies which have been carried out to identify design requirements and mission constraints imposed by the geosynchronous radiation environment. The radiation species of dominant impact are the trapped electrons and solar flare particles. The criterion used in the conducted shielding design analysis has been to limit the skin dose to 100 rems for 3 months. The analysis included the optimization of an electron/bremsstrahlung shield for residence within the vehicle, the minimization of the dose received in extravehicular activity, and the calculation of special shield requirements for solar flares. An investigation was conducted of the potential benefits accruing from a three-layered composite shield with part of the aluminum layer replaced with a lower atomic number material. The materials considered were polyethylene, carbon, beryllium, and lithium hydride.

Post-license education for novice drivers: evaluation of a training programme implemented in Spain.

PubMed

Molina, J Gabriel; Sanmartín, Jaime; Keskinen, Esko; Sanders, Nick

2007-01-01

This study evaluated the implementation of a second phase training program for novice drivers in Spain, which puts the primary focus of the training on the higher hierarchical levels of driver behavior. Two hundred and sixty-three participants took part throughout the study, which was implemented as an experimental design with the test and control groups assessed before and after the one day safety training. Measurement of the impact of the training program focused on the participants' self-evaluation and self-reporting of some driving behavior indicators related to accident risk. Data analysis showed a change in the expected direction in the scale related to the skills for careful driving, but not for the other four scales considered. A feedback survey about the training course offered some important input for evaluating the organization, contents, tuition, and results of the three parts of the training program (discussion group, on-road and track training) as reported by the participants in the test group. The results of the experiment show that using a one day driver safety course, it is possible to change some of the drivers' evaluations connected to safe driving style into safe direction. The follow-up period was exceptionally long (9 months) and the design (randomly divided experimental and control groups with before and after measurements) was reliable. More effort should be devoted to improving the on-road part of the training, which was often perceived as a typical driving lesson rather than a feedback drive. The findings suggest consideration of a mandatory 2nd phase driver training programme as a means to raise awareness of the full range of risks encountered by novice drivers, and as already introduced in 5 EU countries: Austria, Estonia, Finland, Luxembourg and Switzerland.

A seamless phase IIB/III adaptive outcome trial: design rationale and implementation challenges.

PubMed

Chen, Y H Joshua; Gesser, Richard; Luxembourg, Alain

2015-02-01

The licensed four-valent prophylactic human papillomavirus vaccine is highly efficacious in preventing cervical, vulvar, vaginal, and anal cancers and related precancers caused by human papillomavirus types 6, 11, 16, and 18. These four types account for approximately 70% of cervical cancers. A nine-valent human papillomavirus vaccine, including the four original types (6, 11, 16, and 18) plus the next five most prevalent types in cervical cancer (31, 33, 45, 52, and 58) could provide approximately 90% overall cervical cancer coverage. To expedite the nine-valent human papillomavirus vaccine clinical development, an adaptive, seamless Phase IIB/III outcome trial with ∼ 15,000 subjects was conducted to facilitate dose formulation selection and provide pivotal evidence of safety and efficacy for regulatory registrations. We discuss the design rationale and implementation challenges of the outcome trial, focusing on the adaptive feature of the seamless Phase IIB/III design. Subjects were enrolled in two parts (Part A and Part B). Approximately 1240 women, 16-26 years of age, were enrolled in Part A for Phase IIB evaluation and equally randomized to one of three dose formulations of the nine-valent human papillomavirus vaccine or the four-valent human papillomavirus vaccine (active control). Based on an interim analysis of immunogenicity and safety, one dose formulation of the nine-valent human papillomavirus vaccine was selected for evaluation in the Phase III part of the study. Subjects enrolled in Part A who received the selected dose formulation of the nine-valent human papillomavirus vaccine or four-valent human papillomavirus vaccine continued to be followed up and contributed to the final efficacy and safety analyses. In addition, ∼ 13,400 women 16-26 years of age were enrolled in Part B, randomized to nine-valent human papillomavirus vaccine at the selected dose formulation or four-valent human papillomavirus vaccine, and followed for immunogenicity, efficacy, and safety. A seamless Phase IIB/III design was justified by the extensive pre-existing knowledge of the licensed four-valent human papillomavirus vaccine and the development objectives for the nine-valent human papillomavirus vaccine. Subjects enrolled in Part A who received either the selected nine-valent human papillomavirus formulation or four-valent human papillomavirus vaccine contributed ∼ 10% of person-years of follow-up due to its earlier start-thereby maximizing the overall efficiency of the trial. Some of the challenges encountered in the implementation of the adaptive design included practical considerations during Phase IIB formulation selection by internal and external committees, End-of-Phase II discussion with health authorities and managing changes in the assay for immunological endpoints. Application of the experience and lesson learned from this seamless adaptive design to other clinical programs may depend on case-by-case consideration. A seamless Phase IIB/III adaptive design was successfully implemented in this large outcome study. The development time of the second-generation nine-valent human papillomavirus vaccine was shortened due to improved statistical efficiency. © The Author(s) 2014.

[Discussion on developing a data management plan and its key factors in clinical study based on electronic data capture system].

PubMed

Li, Qing-na; Huang, Xiu-ling; Gao, Rui; Lu, Fang

2012-08-01

Data management has significant impact on the quality control of clinical studies. Every clinical study should have a data management plan to provide overall work instructions and ensure that all of these tasks are completed according to the Good Clinical Data Management Practice (GCDMP). Meanwhile, the data management plan (DMP) is an auditable document requested by regulatory inspectors and must be written in a manner that is realistic and of high quality. The significance of DMP, the minimum standards and the best practices provided by GCDMP, the main contents of DMP based on electronic data capture (EDC) and some key factors of DMP influencing the quality of clinical study were elaborated in this paper. Specifically, DMP generally consists of 15 parts, namely, the approval page, the protocol summary, role and training, timelines, database design, creation, maintenance and security, data entry, data validation, quality control and quality assurance, the management of external data, serious adverse event data reconciliation, coding, database lock, data management reports, the communication plan and the abbreviated terms. Among them, the following three parts are regarded as the key factors: designing a standardized database of the clinical study, entering data in time and cleansing data efficiently. In the last part of this article, the authors also analyzed the problems in clinical research of traditional Chinese medicine using the EDC system and put forward some suggestions for improvement.

11 CFR 111.2 - Computation of time.

Code of Federal Regulations, 2011 CFR

2011-01-01

... allowed by this part, the day of the act, event, or default from which the designated period of time... or upon the Commission or such person by mail, three (3) days shall be added to the prescribed period. ...

11 CFR 111.2 - Computation of time.

Code of Federal Regulations, 2014 CFR

2014-01-01

... allowed by this part, the day of the act, event, or default from which the designated period of time... or upon the Commission or such person by mail, three (3) days shall be added to the prescribed period. ...

11 CFR 111.2 - Computation of time.

Code of Federal Regulations, 2010 CFR

2010-01-01

... allowed by this part, the day of the act, event, or default from which the designated period of time... or upon the Commission or such person by mail, three (3) days shall be added to the prescribed period. ...

11 CFR 111.2 - Computation of time.

Code of Federal Regulations, 2012 CFR

2012-01-01

... allowed by this part, the day of the act, event, or default from which the designated period of time... or upon the Commission or such person by mail, three (3) days shall be added to the prescribed period. ...

Pools for the Handicapped.

ERIC Educational Resources Information Center

American School and University, 1979

1979-01-01

Three institutions in Ohio now stress hydrotherapy and water recreation as important parts of individual educational programs for the handicapped. Specially designed and adapted pools provide freedom of movement and ego building as well as physical education and recreation. (Author)

As-built design specification for PARCLS

NASA Technical Reports Server (NTRS)

Tompkins, M. A. (Principal Investigator)

1981-01-01

The PARCLS program, part of the CLASFYG package, reads a parameter file created by the CLASFYG program and a pure pixel ground truth file in order to create to classification file of three separate crop categories in universal format.

A Tactile Stimulator for Studying Passive Shape Perception

PubMed Central

Lane, John W.; Fitzgerald, Paul J.; Yau, Jeffrey M.; Pembeci, Izzet; Hsiao, Steven S.

2009-01-01

We describe a computer-controlled tactile stimulator for use in human psychophysical and monkey neurophysiological studies of 3-D shape perception. The stimulator is constructed primarily of commercially available parts, as well as a few custom-built pieces for which we will supply diagrams upon request. There are two components to the stimulator: a tactile component and a hand positioner component. The tactile component consists of multiple stimulating units that move about in a Cartesian plane above the restrained hand. Each stimulating unit contains a servo-controlled linear motor with an attached small rotary stepper motor, allowing arbitrary stimulus shapes to contact the skin through vibration, static indentation, or scanning. The hand positioner component modifies the conformation of the restrained hand through a set of mechanical linkages under motorized control. The present design controls the amount of spread between digits two and three, the spread between digits four and three, and the degree to which digit three is flexed or extended, thereby simulating different conformations of the hand in contact with objects. This design is easily modified to suit the needs of the experimenter. Because the two components of the stimulator are independently controlled, the stimulator allows for parametric study of the mechanoreceptive and proprioceptive contributions to 3-D tactile shape perception. PMID:19800916

Testing of FTS fingers and interface using a passive compliant robot manipulator. [flight telerobot servicer

NASA Technical Reports Server (NTRS)

Nguyen, Charles C.; Antrazi, Sami S.

1992-01-01

This report deals with testing of a pair of robot fingers designed for the Flight Telerobotic Servicer (FTS) to grasp a cylinder type of Orbital Replaceable Unit (ORU) interface. The report first describes the objectives of the study and then the testbed consisting of a Stewart Platform-based manipulator equipped with a passive compliant platform which also serves as a force/torque sensor. Kinematic analysis is then performed to provide a closed-form solution for the force inverse kinematics and iterative solution for the force forward kinematics using the Newton's Raphson Method. Mathematical expressions are then derived to compute force/torques applied to the FTS fingers during the mating/demating with the interface. The report then presents the three parts of the experimental study on the feasibility and characteristics of the fingers. The first part obtains data of forces applied by the fingers to the interface under various misalignments, the second part determines the maximum allowable capture angles for mating, and the third part processes and interprets the obtained force/torque data.

A Comparison of Film Cooling Techniques in a High Speed, True Scale, Fully Cooled Turbine Vane Ring

DTIC Science & Technology

2007-06-01

configurations in a true scale turbine vane for three proprietary airfoil designs. The measurements for this study were taken at the United States Air...and Background Gas Turbine Film Cooling Gas turbine engines have become an integral part of our society as we use them to propel our aircraft ...and naval vessels as well as generate electricity. Ever since Frank Whittle first applied for a patent on his turbojet engine in 1929, turbine

Lightning Physics: A Three Year Program

DTIC Science & Technology

1983-01-01

because these aircraft are controlled poeal’ r r o(z’, I- RIC) with low-voltage digital electronics and are in part construct- 4w J(,3 cR "*t • at ed of... millise - limits pretrigger and delayed-trigger mode,. and a variety of sample conds, and hundreds of microseconds, respectively, the time of simple...processes, but we feel it prudent to discontinue use of the Proctor, D. E., A radio study of lightning, Ph.D. thesis , Univ. of designations in order

BioProgrammable One, Two, and Three Dimensional Materials

DTIC Science & Technology

2017-01-18

or three- dimensional architectures. The Mirkin group has used DNA-functionalized nanoparticles as “programmable atom equivalents (PAEs)” as material...with electron beam lithography to simultaneously control material structure at the nano- and macroscopic length scales. The Nguyen group has...synthesized and assembled small molecule-DNA hybrids (SMDHs) as part of programmable atom equivalents . The Rosi group identified design rules for using

Stiffness Parameter Design of Suspension Element of Under-Chassis-Equipment for A Rail Vehicle

NASA Astrophysics Data System (ADS)

Ma, Menglin; Wang, Chengqiang; Deng, Hai

2017-06-01

According to the frequency configuration requirements of the vibration of railway under-chassis-equipment, the three- dimension stiffness of the suspension elements of under-chassis-equipment is designed based on the static principle and dynamics principle. The design results of the concrete engineering case show that, compared with the design method based on the static principle, the three- dimension stiffness of the suspension elements designed by the dynamic principle design method is more uniform. The frequency and decoupling degree analysis show that the calculation frequency of under-chassis-equipment under the two design methods is basically the same as the predetermined frequency. Compared with the design method based on the static principle, the design method based on the dynamic principle is adopted. The decoupling degree can be kept high, and the coupling vibration of the corresponding vibration mode can be reduced effectively, which can effectively reduce the fatigue damage of the key parts of the hanging element.

Compact illumination optic with three freeform surfaces for improved beam control.

PubMed

Sorgato, Simone; Mohedano, Rubén; Chaves, Julio; Hernández, Maikel; Blen, José; Grabovičkić, Dejan; Benítez, Pablo; Miñano, Juan Carlos; Thienpont, Hugo; Duerr, Fabian

2017-11-27

Multi-chip and large size LEDs dominate the lighting market in developed countries these days. Nevertheless, a general optical design method to create prescribed intensity patterns for this type of extended sources does not exist. We present a design strategy in which the source and the target pattern are described by means of "edge wavefronts" of the system. The goal is then finding an optic coupling these wavefronts, which in the current work is a monolithic part comprising up to three freeform surfaces calculated with the simultaneous multiple surface (SMS) method. The resulting optic fully controls, for the first time, three freeform wavefronts, one more than previous SMS designs. Simulations with extended LEDs demonstrate improved intensity tailoring capabilities, confirming the effectiveness of our method and suggesting that enhanced performance features can be achieved by controlling additional wavefronts.

Design Evolution: From Rolling Piston to Revolving Vane to Cross-Vane Expander-compressor unit

NASA Astrophysics Data System (ADS)

T, K.; S, Yap K.

2015-08-01

In this paper the design evolution from rolling piston compressor (RP) to revolving vane compressor (RV) and finally to cross-vane expander-compressor unit (CVEC) is presented and discussed. The details in the design philosophy which initiated this evolution will be presented and discussed. It is estimated that more than 90% of the room air-conditioners uses RP in its compressor. This is because of its advantages: it has the few parts, it is simple geometrically and it is reliable. However, it is with no weaknesses. RP's weaknesses lie in three parts: too many rubbing surfaces with high relative rubbing velocity with each other which give rise to high frictional losses; components (eccentric and roller) are not rotating at their centres and resulted in unnecessary inherent vibration; vane tip is constantly rubbing against the roller making it a weakest part in design. To overcome RP's weaknesses, RV is introduced. As compared to RP, RV has fewer rubbing surfaces, and the relative velocities among these surfaces are reduced Components in RV rotate at their own centres and there is no inherent vibration; the rubbing at the vane tip has been eliminated completely. However, like RP, RV also has a large rotor which occupied "useful" space and making the working chamber relatively small. To overcome this latter problem, CVEC is introduced. In this newly invented CVCE, not only parts are all concentric and rotate at their own centres, the unit also recovers expansion energy and hence significantly reduces energy required by the refrigeration systems. And, more importantly, all these are carried out not at the expense of the additional cost. In this paper, details on these three compressors are explained, compared and their respective uniqueness are shown and discussed.

"Do I really want to do this?" Longitudinal cohort study participants' perspectives on postal survey design: a qualitative study.

PubMed

Harcombe, Helen; Derrett, Sarah; Herbison, Peter; McBride, David

2011-01-27

Randomised controlled trials have investigated aspects of postal survey design yet cannot elaborate on reasons behind participants' decision making and survey behaviour. This paper reports participants' perspectives of the design of, and participation in, a longitudinal postal cohort survey. It describes strengths and weaknesses in study design from the perspectives of study participants and aims to contribute to the: 1) design of future cohort surveys and questionnaires generally and, 2) design of cohort surveys for people with musculoskeletal disorders (MSDs) specifically. In-depth interviews explored the design of postal surveys previously completed by participants. Interviews used open ended questioning with a topic guide for prompts if areas of interest were not covered spontaneously. Thematic data analysis was undertaken based on the framework method. A second researcher verified all coding. Data from fourteen interviews were analysed within three main themes; participation, survey design and survey content. One of the main findings was the importance of clear communication aimed at the correct audience both when inviting potential participants to take part and within the survey itself. Providing enough information about the study, having a topic of interest and an explanation of likely benefits of the study were important when inviting people to participate. The neutrality of the survey and origination from a reputable source were both important; as was an explanation about why information was being collected within the survey itself. Study findings included participants' impressions when invited to take part, why they participated, the acceptability of follow-up of non-responders and why participants completed the follow-up postal survey. Also discussed were participants' first impression of the survey, its length, presentation and participants' views about specific questions within the survey. Ideas generated in this study provide an insight into participants' decision making and survey behaviour and may enhance the acceptability of future surveys to potential participants. As well as clear communication, participants valued incentives and survey questions that were relevant to them. However, opinions varied as to the preferred format for responses with some advising more opportunity for open-ended feedback. We also found that some standard format questions can raise quandaries for individual participants.

Part 1: Vadose-zone column studies of toluene (enhanced bioremediation) in a shallow unconfined aquifer

USGS Publications Warehouse

Tindall, J.A.; Friedel, M.J.; Szmajter, R.J.; Cuffin, S.M.

2005-01-01

The objectives of the laboratory study described in this paper were (1) to determine the effectiveness of four nutrient solutions and a control in stimulating the microbial degradation of toluene in the unsaturated zone as an alternative to bioremediation methodologies such as air sparging, in situ vitrification, or others (Part I), and (2) to compare the effectiveness of the addition of the most effective nutrient solution from Part I (modified Hoagland type, nitrate-rich) and hydrogen peroxide (H2O2) on microbial degradation of toluene for repeated, simulated spills in the unsaturated zone (Part II). For Part 1, fifteen columns (30-cm diameter by 150-cm height), packed with air-dried, 0.25-mm, medium-fine sand, were prepared to simulate shallow unconfined aquifer conditions. Toluene (10 mL) was added to the surface of each column, and soil solution and soil gas samples were collected from the columns every third day for 21 days. On day 21, a second application of toluene (10 mL) was made, and the experiment was run for another 21 days. Solution 4 was the most effective for microbial degradation in Part I. For Part II, three columns were designated nutrient-rich 3-day toluene columns and received toluene injections every 3 days; three columns were designated as nutrient-rich 7-day columns and received toluene injections every 7 days; and two columns were used as controls to which no nutrient was added. As measured by CO2 respiration, the initial benefits for aerobic organisms from the O2 enhancement were sustained by the bacteria for only a short period of time (about 8 days). Degradation benefits from the nutrient solution were sustained throughout the experiment. The O2 and nutrient-enhanced columns degraded significantly more toluene than the control columns when simulating repeated spills onto the unsaturated zone, and demonstrated a potentially effective in situ bioremediation technology when used immediately or within days after a spill. The combined usage of H 2O2 and nitrate-rich nutrients served to effectively maximize natural aerobic and anaerobic metabolic processes that biodegrade hydrocarbons in petroleum-contaminated media. Applications of this technology in the field may offer economical advantages to other, more intrusive abatement technologies. ?? Springer 2005.

All-plastic, miniature, digital fluorescence microscope for three part white blood cell differential measurements at the point of care

PubMed Central

Forcucci, Alessandra; Pawlowski, Michal E.; Majors, Catherine; Richards-Kortum, Rebecca; Tkaczyk, Tomasz S.

2015-01-01

Three-part differential white blood cell counts are used for disease diagnosis and monitoring at the point-of-care. A low-cost, miniature achromatic microscope was fabricated for identification of lymphocytes, monocytes, and granulocytes in samples of whole blood stained with acridine orange. The microscope was manufactured using rapid prototyping techniques of diamond turning and 3D printing and is intended for use at the point-of-care in low-resource settings. The custom-designed microscope requires no manual adjustment between samples and was successfully able to classify three white blood cell types (lymphocytes, granulocytes, and monocytes) using samples of peripheral whole blood stained with acridine orange. PMID:26601006

Amplifiers for bioelectric events: a design with a minimal number of parts.

PubMed

MettingVanRijn, A C; Peper, A; Grimbergen, C A

1994-05-01

A design for an amplifier for bioelectric events is presented that has fewer parts than conventional designs. The design allows the construction of amplifiers of a high quality in terms of noise and common mode rejection, with reduced dimensions and with a lower power consumption. Gain, bandwidth and number of channels are easily adapted to a wide range of biomedical applications. An application example is given in the form of a multichannel EEG amplifier (gain is 20,000), in which each channel consists of three operational amplifiers (one single and one dual), six resistors and two capacitors. The equivalent input noise voltage and current are 0.15 microVrms and 1 pArms, respectively, in a bandwidth of 0.2-40 Hz, and a common mode rejection ratio of 136 dB is achieved without trimming.

Space Station communications and tracking systems modeling and RF link simulation

NASA Technical Reports Server (NTRS)

Tsang, Chit-Sang; Chie, Chak M.; Lindsey, William C.

1986-01-01

In this final report, the effort spent on Space Station Communications and Tracking System Modeling and RF Link Simulation is described in detail. The effort is mainly divided into three parts: frequency division multiple access (FDMA) system simulation modeling and software implementation; a study on design and evaluation of a functional computerized RF link simulation/analysis system for Space Station; and a study on design and evaluation of simulation system architecture. This report documents the results of these studies. In addition, a separate User's Manual on Space Communications Simulation System (SCSS) (Version 1) documents the software developed for the Space Station FDMA communications system simulation. The final report, SCSS user's manual, and the software located in the NASA JSC system analysis division's VAX 750 computer together serve as the deliverables from LinCom for this project effort.

Inertial Motion Capture Costume Design Study

PubMed Central

Szczęsna, Agnieszka; Skurowski, Przemysław; Lach, Ewa; Pruszowski, Przemysław; Pęszor, Damian; Paszkuta, Marcin; Słupik, Janusz; Lebek, Kamil; Janiak, Mateusz; Polański, Andrzej; Wojciechowski, Konrad

2017-01-01

The paper describes a scalable, wearable multi-sensor system for motion capture based on inertial measurement units (IMUs). Such a unit is composed of accelerometer, gyroscope and magnetometer. The final quality of an obtained motion arises from all the individual parts of the described system. The proposed system is a sequence of the following stages: sensor data acquisition, sensor orientation estimation, system calibration, pose estimation and data visualisation. The construction of the system’s architecture with the dataflow programming paradigm makes it easy to add, remove and replace the data processing steps. The modular architecture of the system allows an effortless introduction of a new sensor orientation estimation algorithms. The original contribution of the paper is the design study of the individual components used in the motion capture system. The two key steps of the system design are explored in this paper: the evaluation of sensors and algorithms for the orientation estimation. The three chosen algorithms have been implemented and investigated as part of the experiment. Due to the fact that the selection of the sensor has a significant impact on the final result, the sensor evaluation process is also explained and tested. The experimental results confirmed that the choice of sensor and orientation estimation algorithm affect the quality of the final results. PMID:28304337

Upper extremity interaction with a helicopter side airbag: injury criteria for dynamic hyperextension of the female elbow joint.

PubMed

Duma, Stefan M; Hansen, Gail A; Kennedy, Eric A; Rath, Amber L; McNally, Craig; Kemper, Andrew R; Smith, Eric P; Brolinson, P Gunnar; Stitzel, Joel D; Davis, Martin B; Bass, Cameron R; Brozoski, Frederick T; McEntire, B Joseph; Alem, Nabih M; Crowley, John S

2004-11-01

This paper describes a three part analysis to characterize the interaction between the female upper extremity and a helicopter cockpit side airbag system and to develop dynamic hyperextension injury criteria for the female elbow joint. Part I involved a series of 10 experiments with an original Army Black Hawk helicopter side airbag. A 5(th) percentile female Hybrid III instrumented upper extremity was used to demonstrate side airbag upper extremity loading. Two out of the 10 tests resulted in high elbow bending moments of 128 Nm and 144 Nm. Part II included dynamic hyperextension tests on 24 female cadaver elbow joints. The energy source was a drop tower utilizing a three-point bending configuration to apply elbow bending moments matching the previously conducted side airbag tests. Post-test necropsy showed that 16 of the 24 elbow joint tests resulted in injuries. Injury severity ranged from minor cartilage damage to more moderate joint dislocations and severe transverse fractures of the distal humerus. Peak elbow bending moments ranged from 42.4 Nm to 146.3 Nm. Peak bending moment proved to be a significant indicator of any elbow injury (p = 0.02) as well as elbow joint dislocation (p = 0.01). Logistic regression analyses were used to develop single and multiple variate injury risk functions. Using peak moment data for the entire test population, a 50% risk of obtaining any elbow injury was found at 56 Nm while a 50% risk of sustaining an elbow joint dislocation was found at 93 Nm for the female population. These results indicate that the peak elbow bending moments achieved in Part I are associated with a greater than 90% risk for elbow injury. Subsequently, the airbag was re-designed in an effort to mitigate this as well as the other upper extremity injury risks. Part III assessed the redesigned side airbag module to ensure injury risks had been reduced prior to implementing the new system. To facilitate this, 12 redesigned side airbag deployments were conducted using the same procedures as Part I. Results indicate that the re-designed side airbag has effectively mitigated elbow injury risks induced by the original side airbag design. It is anticipated that this study will provide researchers with additional injury criteria for assessing upper extremity injury risk caused by both military and automotive side airbag deployments.

Study of Cr/Sc-based multilayer reflecting mirrors using soft x-ray reflectivity and standing wave-enhanced x-ray fluorescence

NASA Astrophysics Data System (ADS)

Wu, Meiyi; Burcklen, Catherine; André, Jean-Michel; Guen, Karine Le; Giglia, Angelo; Koshmak, Konstantin; Nannarone, Stefano; Bridou, Françoise; Meltchakov, Evgueni; Rossi, Sébastien de; Delmotte, Franck; Jonnard, Philippe

2017-11-01

We study Cr/Sc-based multilayer mirrors designed to work in the water window range using hard and soft x-ray reflectivity as well as x-ray fluorescence enhanced by standing waves. Samples differ by the elemental composition of the stack, the thickness of each layer, and the order of deposition. This paper mainly consists of two parts. In the first part, the optical performances of different Cr/Sc-based multilayers are reported, and in the second part, we extend further the characterization of the structural parameters of the multilayers, which can be extracted by comparing the experimental data with simulations. The methodology is detailed in the case of Cr/B4C/Sc sample for which a three-layer model is used. Structural parameters determined by fitting reflectivity curve are then introduced as fixed parameters to plot the x-ray standing wave curve, to compare with the experiment, and confirm the determined structure of the stack.

Aerosolization Characteristics of Hard Impact Testing of Depleted Uranium Penetrators

DTIC Science & Technology

1982-10-01

meters (8 feet) deep half-cylinder, which is designed to prevent sabot parts from travelling laterally after impaction. The PFT is located about 15...specially designed , cut and perforated collection filter. Configuration I is used for staces one and three while Configuration II is used for stages two...official Department of the Army position, unless so designated by other authorized documents. d0#8 Wt oWnsti~tute indo?.dment of an ome, I producot

Use of Two-Part Regression Calibration Model to Correct for Measurement Error in Episodically Consumed Foods in a Single-Replicate Study Design: EPIC Case Study

PubMed Central

Agogo, George O.; van der Voet, Hilko; Veer, Pieter van’t; Ferrari, Pietro; Leenders, Max; Muller, David C.; Sánchez-Cantalejo, Emilio; Bamia, Christina; Braaten, Tonje; Knüppel, Sven; Johansson, Ingegerd; van Eeuwijk, Fred A.; Boshuizen, Hendriek

2014-01-01

In epidemiologic studies, measurement error in dietary variables often attenuates association between dietary intake and disease occurrence. To adjust for the attenuation caused by error in dietary intake, regression calibration is commonly used. To apply regression calibration, unbiased reference measurements are required. Short-term reference measurements for foods that are not consumed daily contain excess zeroes that pose challenges in the calibration model. We adapted two-part regression calibration model, initially developed for multiple replicates of reference measurements per individual to a single-replicate setting. We showed how to handle excess zero reference measurements by two-step modeling approach, how to explore heteroscedasticity in the consumed amount with variance-mean graph, how to explore nonlinearity with the generalized additive modeling (GAM) and the empirical logit approaches, and how to select covariates in the calibration model. The performance of two-part calibration model was compared with the one-part counterpart. We used vegetable intake and mortality data from European Prospective Investigation on Cancer and Nutrition (EPIC) study. In the EPIC, reference measurements were taken with 24-hour recalls. For each of the three vegetable subgroups assessed separately, correcting for error with an appropriately specified two-part calibration model resulted in about three fold increase in the strength of association with all-cause mortality, as measured by the log hazard ratio. Further found is that the standard way of including covariates in the calibration model can lead to over fitting the two-part calibration model. Moreover, the extent of adjusting for error is influenced by the number and forms of covariates in the calibration model. For episodically consumed foods, we advise researchers to pay special attention to response distribution, nonlinearity, and covariate inclusion in specifying the calibration model. PMID:25402487

Extended parametric representation of compressor fans and turbines. Volume 2: Part user's manual (parametric turbine)

NASA Technical Reports Server (NTRS)

Coverse, G. L.

1984-01-01

A turbine modeling technique has been developed which will enable the user to obtain consistent and rapid off-design performance from design point input. This technique is applicable to both axial and radial flow turbine with flow sizes ranging from about one pound per second to several hundred pounds per second. The axial flow turbines may or may not include variable geometry in the first stage nozzle. A user-specified option will also permit the calculation of design point cooling flow levels and corresponding changes in efficiency for the axial flow turbines. The modeling technique has been incorporated into a time-sharing program in order to facilitate its use. Because this report contains a description of the input output data, values of typical inputs, and example cases, it is suitable as a user's manual. This report is the second of a three volume set. The titles of the three volumes are as follows: (1) Volume 1 CMGEN USER's Manual (Parametric Compressor Generator); (2) Volume 2 PART USER's Manual (Parametric Turbine); (3) Volume 3 MODFAN USER's Manual (Parametric Modulation Flow Fan).

Impact behaviour of an innovative plasticized poly(vinyl chloride) for the automotive industry

NASA Astrophysics Data System (ADS)

Bernard, C. A.; Bahlouli, N.; Wagner-Kocher, C.; Ahzi, S.; Rémond, Y.

2015-09-01

Plasticized poly(vinyl chloride) (PPVC) is widely used in the automotive industry in the design of structural parts for crashworthiness applications. Thus, it is necessary to study and understand the influence of the mechanical response and mechanical properties of PPVC over a wide range of strain rate, from quasi-static to dynamic loadings. The process is also investigated using different sample thicknesses. In this work, the strain rate effect of a new PPVC is investigated over a wide range of strain rates at three temperatures and for three thicknesses. A modelling of the yield stress is also proposed. The numerical prediction is in good agreement with the experimental results.

CFD study of ejector flow behavior in a blast furnace gas galvanizing plant

NASA Astrophysics Data System (ADS)

Besagni, Giorgio; Mereu, Riccardo; Inzoli, Fabio

2015-02-01

In recent years, there has been a growing interest toward Blast Furnace Gas (BFG) as a low-grade energy source for industrial furnaces. This paper considers the revamping of a galvanic plant furnace converted to BFG from natural gas. In the design of the new system, the ejector on the exhaust line is a critical component. This paper studies the flow behavior of the ejector using a Computational Fluid Dynamics (CFD) analysis. The CFD model is based on a 3D representation of the ejector, using air and exhaust gases as working fluids. This paper is divided in three parts. In the first part, the galvanic plant used as case study is presented and discussed, in the second part the CFD approach is outlined, and in the third part the CFD approach is validated using experimental data and the numerical results are presented and discussed. Different Reynolds-Averaged Navier-Stokes (RANS) turbulence models ( k-ω SST and k-ɛ Realizable) are evaluated in terms of convergence capability and accuracy in predicting the pressure drop along the ejector. Suggestions for future optimization of the system are also provided.

Three lessons from a randomized trial of massage and meditation at end of life: patient benefit, outcome measure selection, and design of trials with terminally ill patients.

PubMed

Downey, Lois; Engelberg, Ruth A; Standish, Leanna J; Kozak, Leila; Lafferty, William E

2009-01-01

Improving end-of-life care is a priority in the United States, but assigning priorities for standard care services requires evaluations using appropriate study design and appropriate outcome indicators. A recent randomized controlled trial with terminally ill patients produced no evidence of benefit from massage or guided meditation, when evaluated with measures of global quality of life or pain distress over the course of patient participation. However, reanalysis using a more targeted outcome, surrogates' assessment of patients' benefit from the study intervention, suggested significant gains from massage-the treatment patients gave their highest preassignment preference ratings. The authors conclude that adding a menu of complementary therapies as part of standard end-of-life care may yield significant benefit, that patient preference is an important predictor of outcome, and that modifications in trial design may be appropriate for end-of-life studies.

One-pot DNA construction for synthetic biology: the Modular Overlap-Directed Assembly with Linkers (MODAL) strategy

PubMed Central

Casini, Arturo; MacDonald, James T.; Jonghe, Joachim De; Christodoulou, Georgia; Freemont, Paul S.; Baldwin, Geoff S.; Ellis, Tom

2014-01-01

Overlap-directed DNA assembly methods allow multiple DNA parts to be assembled together in one reaction. These methods, which rely on sequence homology between the ends of DNA parts, have become widely adopted in synthetic biology, despite being incompatible with a key principle of engineering: modularity. To answer this, we present MODAL: a Modular Overlap-Directed Assembly with Linkers strategy that brings modularity to overlap-directed methods, allowing assembly of an initial set of DNA parts into a variety of arrangements in one-pot reactions. MODAL is accompanied by a custom software tool that designs overlap linkers to guide assembly, allowing parts to be assembled in any specified order and orientation. The in silico design of synthetic orthogonal overlapping junctions allows for much greater efficiency in DNA assembly for a variety of different methods compared with using non-designed sequence. In tests with three different assembly technologies, the MODAL strategy gives assembly of both yeast and bacterial plasmids, composed of up to five DNA parts in the kilobase range with efficiencies of between 75 and 100%. It also seamlessly allows mutagenesis to be performed on any specified DNA parts during the process, allowing the one-step creation of construct libraries valuable for synthetic biology applications. PMID:24153110

Economics of PPP-insulated pipe-type cable: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ernst, A.

1987-10-01

This study has been designed to establish the economic range of application and the potential cost advantage of PPP-insulated pipe-type cable compared with presently utilized paper-insulated designs. The study is in two parts. In the first part the electrical and thermal characteristics of a range of cable sizes are tabulated. This data can be utilized for planning and economic comparison purposes. In the second part 12 transmission load scenarios are studied to determine the relative cost of various designs considering materials, installation and the losses over a wide range of assumptions.

Obstacle Detection Algorithms for Aircraft Navigation: Performance Characterization of Obstacle Detection Algorithms for Aircraft Navigation

NASA Technical Reports Server (NTRS)

Kasturi, Rangachar; Camps, Octavia; Coraor, Lee

2000-01-01

The research reported here is a part of NASA's Synthetic Vision System (SVS) project for the development of a High Speed Civil Transport Aircraft (HSCT). One of the components of the SVS is a module for detection of potential obstacles in the aircraft's flight path by analyzing the images captured by an on-board camera in real-time. Design of such a module includes the selection and characterization of robust, reliable, and fast techniques and their implementation for execution in real-time. This report describes the results of our research in realizing such a design. It is organized into three parts. Part I. Data modeling and camera characterization; Part II. Algorithms for detecting airborne obstacles; and Part III. Real time implementation of obstacle detection algorithms on the Datacube MaxPCI architecture. A list of publications resulting from this grant as well as a list of relevant publications resulting from prior NASA grants on this topic are presented.

READING FOR THE GIFTED--GUIDED EXTENSION OF READING SKILLS THROUGH LITERATURE. PART 1, APPRECIATING THE CONTRIBUTIONS OF ONE AUTHOR...

ERIC Educational Resources Information Center

CURTIS, ALICE; AND OTHERS

THIS TEACHING GUIDE IS PRESENTED TO ASSIST THE TEACHER IN WHOSE CLASSES ARE ONE OR MORE GIFTED PUPILS READING ABOVE GRADE LEVEL. DESIGNED FOR USE WITH GIFTED PUPILS AT GRADES FIVE AND SIX, PART 1 PROVIDES GUIDANCE FOR TEACHING THE CONTRIBUTIONS OF ONE AUTHOR TO CHILDREN'S LITERATURE. THE METHOD USES THREE GROUPINGS OF BOOKS. THE "A"…

Effects of Prompting in Reflective Learning Tools: Findings from Experimental Field, Lab, and Online Studies.

PubMed

Renner, Bettina; Prilla, Michael; Cress, Ulrike; Kimmerle, Joachim

2016-01-01

Reflective learning is an important type of learning both in formal and informal situations-in school, higher education, at the workplace, and in everyday life. People may benefit from technical support for reflective learning, in particular when supporting each other by reflecting not only upon their own but also upon other people's problems. We refer to this collective approach where people come together to think about experiences and find solutions to problems as "collaborative reflection." We present three empirical studies about the effects of prompting in reflective learning tools in such situations where people reflect on others' issues. In Study 1 we applied a three-stage within-group design in a field experiment, where 39 participants from two organizations received different types of prompts while they used a reflection app. We found that prompts that invited employees to write down possible solutions led to more comprehensive comments on their colleagues' experiences. In Study 2 we used a three-stage between-group design in a laboratory experiment, where 78 university students were invited to take part in an experiment about the discussion of problems at work or academic studies in online forums. Here we found that short, abstract prompts showed no superiority to a situation without any prompts with respect to quantity or quality of contributions. Finally, Study 3 featured a two-stage between-group design in an online experiment, where 60 participants received either general reflection instructions or detailed instructions about how to reflect on other people's problems. We could show that detailed reflection instructions supported people in producing more comprehensive comments that included more general advice. The results demonstrate that to increase activity and to improve quality of comments with prompting tools require detailed instructions and specific wording of the prompts.

Doppler Lidar System Design via Interdisciplinary Design Concept at NASA Langley Research Center - Part III

NASA Technical Reports Server (NTRS)

Barnes, Bruce W.; Sessions, Alaric M.; Beyon, Jeffrey; Petway, Larry B.

2014-01-01

Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. The existing power system was analyzed to rank components in terms of inefficiency, power dissipation, footprint and mass. Design considerations and priorities are compared along with the results of each design iteration. Overall power system improvements are summarized for design implementations.

Designing and testing a classroom curriculum to teach preschoolers about the biology of physical activity: The respiration system as an underlying biological causal mechanism

NASA Astrophysics Data System (ADS)

Ewing, Tracy S.

The present study examined young children's understanding of respiration and oxygen as a source of vital energy underlying physical activity. Specifically, the purpose of the study was to explore whether a coherent biological theory, characterized by an understanding that bodily parts (heart and lungs) and processes (oxygen in respiration) as part of a biological system, can be taught as a foundational concept to reason about physical activity. The effects of a biology-based intervention curriculum designed to teach preschool children about bodily functions as a part of the respiratory system, the role of oxygen as a vital substance and how physical activity acts an energy source were examined. Participants were recruited from three private preschool classrooms (two treatment; 1 control) in Southern California and included a total of 48 four-year-old children (30 treatment; 18 control). Findings from this study suggested that young children could be taught relevant biological concepts about the role of oxygen in respiratory processes. Children who received biology-based intervention curriculum made significant gains in their understanding of the biology of respiration, identification of physical and sedentary activities. In addition these children demonstrated that coherence of conceptual knowledge was correlated with improved accuracy at activity identification and reasoning about the inner workings of the body contributing to endurance. Findings from this study provided evidence to support the benefits of providing age appropriate but complex coherent biological instruction to children in early childhood settings.

The Magnetic Field Along the Axis of a Short, Thick Solenoid

NASA Astrophysics Data System (ADS)

Hart, Francis Xavier

2018-02-01

We commonly ask students to compare the results of their experimental measurements with the predictions of a simple physical model that is well understood. However, in practice, physicists must compare their experimental measurements with the predictions of several models, none of which may work well over the entire range of measurements. The following describes an experiment we use in the second semester of a two-semester course designed for chemistry, biochemistry, and biology majors as an example of this situation. There are three parts to the experiment. In the first part the students, working in groups of two or three, calibrate a search coil. In the second part they position the coil at various distances from the center of a thick, finite solenoid and measure the field at each position. In the third part they use three models to predict the magnetic field at each of those positions. The students must then decide if one model best predicts the results of the measurements. If no single model can do so, they must decide which model works best over which range.

"Understanding Difficult Behavior": A Selection of Learning Experiences Designed for Staff in Long Term Facilities. A Training Manual. Geriatric Education and Resource Outreach.

ERIC Educational Resources Information Center

Nigam, Linda; And Others

This manual, which is intended for use in conducting individualized inservice training sessions for certified nurse aides employed in nursing homes and boarding homes throughout Maine, contains three sections of learning experiences designed to help health care workers better understand and deal with "difficult" behavior on the part of…

Teaching Skills to Use a Computer Mouse in Preschoolers with Developmental Disabilities: Shaping Moving a Mouse and Eye-Hand Coordination

ERIC Educational Resources Information Center

Shimizu, Hirofumi; Yoon, Soyoung; McDonough, Christopher S.

2010-01-01

We taught seven preschoolers with developmental disabilities to point-and-click with a computer mouse. The computer-based training program consisted of three parts, based on a task analysis of the behavioral prerequisites to point-and-click. Training 1 was designed to shape moving the mouse. Training 2 was designed to build eye-hand coordination…

The Comparison of Two Forms of a Classroom Simulation Test Designed To Enhance Future Teachers Self-Definition and Teaching Style. Final Report.

ERIC Educational Resources Information Center

Garrison, Jesse H.; Kersh, Bert Y.

The experiment reported in this document is based on the work of Garrison and others in developing a testing and interviewing procedure designed to enable increased self-definition on the part of prospective teachers and earlier development of appropriate and effective teaching styles. Three groups of elementary education majors were involved in…

Design sensitivity analysis of boundary element substructures

NASA Technical Reports Server (NTRS)

Kane, James H.; Saigal, Sunil; Gallagher, Richard H.

1989-01-01

The ability to reduce or condense a three-dimensional model exactly, and then iterate on this reduced size model representing the parts of the design that are allowed to change in an optimization loop is discussed. The discussion presents the results obtained from an ongoing research effort to exploit the concept of substructuring within the structural shape optimization context using a Boundary Element Analysis (BEA) formulation. The first part contains a formulation for the exact condensation of portions of the overall boundary element model designated as substructures. The use of reduced boundary element models in shape optimization requires that structural sensitivity analysis can be performed. A reduced sensitivity analysis formulation is then presented that allows for the calculation of structural response sensitivities of both the substructured (reduced) and unsubstructured parts of the model. It is shown that this approach produces significant computational economy in the design sensitivity analysis and reanalysis process by facilitating the block triangular factorization and forward reduction and backward substitution of smaller matrices. The implementatior of this formulation is discussed and timings and accuracies of representative test cases presented.

PIV measurements in a compact return diffuser under multi-conditions

NASA Astrophysics Data System (ADS)

Zhou, L.; Lu, W. G.; Shi, W. D.

2013-12-01

Due to the complex three-dimensional geometries of impellers and diffusers, their design is a delicate and difficult task. Slight change could lead to significant changes in hydraulic performance and internal flow structure. Conversely, the grasp of the pump's internal flow pattern could benefit from pump design improvement. The internal flow fields in a compact return diffuser have been investigated experimentally under multi-conditions. A special Particle Image Velocimetry (PIV) test rig is designed, and the two-dimensional PIV measurements are successfully conducted in the diffuser mid-plane to capture the complex flow patterns. The analysis of the obtained results has been focused on the flow structure in diffuser, especially under part-load conditions. The vortex and recirculation flow patterns in diffuser are captured and analysed accordingly. Strong flow separation and back flow appeared at the part-load flow rates. Under the design and over-load conditions, the flow fields in diffuser are uniform, and the flow separation and back flow appear at the part-load flow rates, strong back flow is captured at one diffuser passage under 0.2Qdes.

Three column intermittent simulated moving bed chromatography: 3. Cascade operation for center-cut separations.

PubMed

Jermann, Simon; Meijssen, Mattheus; Mazzotti, Marco

2015-01-23

A general design methodology for chromatographic three fraction separation by application of the three column intermittent simulated moving bed (3C-ISMB) cascade is proposed and experimentally validated by studying the purification of an intermediately retained stereoisomer of nadolol, from an equimolar mixture of its four stereoisomers. The theoretical part shows that the 3C-ISMB cascade can be easily designed by applying Triangle Theory. Moreover, a re-scaling approach for the second stage is proposed so as to account for the fact that the feed flow rates to stage 2 are generally higher as compared to stage 1 due to dilution in the latter. Scaling the columns of the second stage accordingly enables to run both stages under optimal conditions with respect to switching time and step ratio, which is an important advantage as compared to integrated ternary processes. The experimental part starts with studying the linear adsorption behavior of nadolol in heptane/ethanol/DEA on Chiralpak AD for varying ratios of heptane and ethanol. Based on that, a solvent composition of Hept/EtOH/DEA 30/70/0.3 (v/v/v) is selected and the competitive multi-component Langmuir isotherm of the quaternary mixture is determined by frontal analysis. The resulting isotherm parameters are used to design several first stage experiments aiming at removal of the most retained component. The resulting ternary intermediate product is reprocessed in several second stage experiments studying various configurations. Finally, the dilution of the intermediate product with Hept/DEA yielding a solvent composition of Hept/EtOH/DEA 60/40/0.3 (v/v/v) is examined showing that the resulting increase in retention is beneficial for final product purities. Moreover, the reduction in viscosity compensates for the dilution as it enables higher flow rates. Dilution of the intermediate product is hence the best option, yielding highest overall cascade productivity (2.10gl(-1)h(-1)) and highest product purity (97.8%) requiring a specific solvent consumption of 12l/g of product. Copyright © 2014 Elsevier B.V. All rights reserved.

Evaluation of Child Care Subsidy Strategies: Implementation of Three Language and Literacy Interventions in Project Upgrade. OPRE 2011-4

ERIC Educational Resources Information Center

Layzer, Carolyn J.; Layzer, Jean I.; Wolf, Anne

2010-01-01

This report describes the design and implementation of the three interventions tested in Project Upgrade, one of four experiments conducted as part of the Evaluation of Child Care Subsidy Strategies. The evaluation was a multi-site, multi-year effort to determine whether and how different child care subsidy policies and procedures and quality…

The Halo B2B Studio

NASA Astrophysics Data System (ADS)

Gorzynski, Mark; Derocher, Mike; Mitchell, April Slayden

Research underway at Hewlett-Packard on remote communication resulted in the identification of three important components typically missing in existing systems. These missing components are: group nonverbal communication capabilities, high-resolution interactive data capabilities, and global services. Here we discuss some of the design elements in these three areas as part of the Halo program at HP, a remote communication system shown to be effective to end-users.

A Three-Axis Force Sensor for Dual Finger Haptic Interfaces

PubMed Central

Fontana, Marco; Marcheschi, Simone; Salsedo, Fabio; Bergamasco, Massimo

2012-01-01

In this work we present the design process, the characterization and testing of a novel three-axis mechanical force sensor. This sensor is optimized for use in closed-loop force control of haptic devices with three degrees of freedom. In particular the sensor has been conceived for integration with a dual finger haptic interface that aims at simulating forces that occur during grasping and surface exploration. The sensing spring structure has been purposely designed in order to match force and layout specifications for the application. In this paper the design of the sensor is presented, starting from an analytic model that describes the characteristic matrix of the sensor. A procedure for designing an optimal overload protection mechanism is proposed. In the last part of the paper the authors describe the experimental characterization and the integrated test on a haptic hand exoskeleton showing the improvements in the controller performances provided by the inclusion of the force sensor. PMID:23202012

Evaluation criteria for the district health management information systems: lessons from the Ministry of Health, Kenya.

PubMed

Odhiambo-Otieno, George W; Odero, Wilson W O

2005-03-01

The District Health Management Information Systems (DHMISs) were established by the Ministry of Health (MoH) in Kenya more than two decades ago. Since then, no comprehensive evaluation has been undertaken. This can partly be attributed to lack of defined criteria for evaluating them. To propose evaluation criteria for assessing the design, implementation and impact of DHMIS in the management of the District Health System (DHS) in Kenya. A descriptive cross-sectional study conducted in three DHSs in Kenya: Bungoma, Murang'a and Uasin Gishu districts. Data was collected through focus group discussions, key informant interviews, and documents' review. The respondents, purposely selected from the Ministry of Health headquarters and the three DHS districts, included designers, managers and end-users of the systems. A set of evaluation criteria for DHMISs was identified for each of the three phases of implementation: pre-implementation evaluation criteria (categorised as policy and objectives, technical feasibility, financial viability, political viability and administrative operability) to be applied at the design stage; concurrent implementation evaluation criteria to be applied during implementation of the new system; and post-implementation evaluation criteria (classified as internal - quality of information; external - resources and managerial support; ultimate - systems impact) to be applied after implementation of the system for at least three years. In designing a DHMIS model there is need to have built-in these three sets of evaluation criteria which should be used in a phased manner. Pre-implementation evaluation criteria should be used to evaluate the system's viability before more resources are committed to it; concurrent (operational) - implementation evaluation criteria should be used to monitor the process; and post-implementation evaluation criteria should be applied to assess the system's effectiveness.

Estimation of sample size and testing power (part 5).

PubMed

Hu, Liang-ping; Bao, Xiao-lei; Guan, Xue; Zhou, Shi-guo

2012-02-01

Estimation of sample size and testing power is an important component of research design. This article introduced methods for sample size and testing power estimation of difference test for quantitative and qualitative data with the single-group design, the paired design or the crossover design. To be specific, this article introduced formulas for sample size and testing power estimation of difference test for quantitative and qualitative data with the above three designs, the realization based on the formulas and the POWER procedure of SAS software and elaborated it with examples, which will benefit researchers for implementing the repetition principle.

Biomechanics of the Sensor–Tissue Interface—Effects of Motion, Pressure, and Design on Sensor Performance and the Foreign Body Response—Part I: Theoretical Framework

PubMed Central

Helton, Kristen L; Ratner, Buddy D; Wisniewski, Natalie A

2011-01-01

The importance of biomechanics in glucose sensor function has been largely overlooked. This article is the first part of a two-part review in which we look beyond commonly recognized chemical biocompatibility to explore the biomechanics of the sensor–tissue interface as an important aspect of continuous glucose sensor biocompatibility. Part I provides a theoretical framework to describe how biomechanical factors such as motion and pressure (typically micromotion and micropressure) give rise to interfacial stresses, which affect tissue physiology around a sensor and, in turn, impact sensor performance. Three main contributors to sensor motion and pressure are explored: applied forces, sensor design, and subject/patient considerations. We describe how acute forces can temporarily impact sensor signal and how chronic forces can alter the foreign body response and inflammation around an implanted sensor, and thus impact sensor performance. The importance of sensor design (e.g., size, shape, modulus, texture) and specific implant location on the tissue response are also explored. In Part II: Examples and Application (a sister publication), examples from the literature are reviewed, and the application of biomechanical concepts to sensor design are described. We believe that adding biomechanical strategies to the arsenal of material compositions, surface modifications, drug elution, and other chemical strategies will lead to improvements in sensor biocompatibility and performance. PMID:21722578

Traditional Versus Online Biology Courses: Connecting Course Design and Student Learning in an Online Setting

PubMed Central

Biel, Rachel; Brame, Cynthia J.

2016-01-01

Online courses are a large and growing part of the undergraduate education landscape, but many biology instructors are skeptical about the effectiveness of online instruction. We reviewed studies comparing the effectiveness of online and face-to-face (F2F) undergraduate biology courses. Five studies compared student performance in multiple course sections at community colleges, while eight were smaller scale and compared student performance in particular biology courses at a variety of types of institutions. Of the larger-scale studies, two found that students in F2F sections outperformed students in online sections, and three found no significant difference; it should be noted, however, that these studies reported little information about course design. Of the eight smaller scale studies, six found no significant difference in student performance between the F2F and online sections, while two found that the online sections outperformed the F2F sections. In alignment with general findings about online teaching and learning, these results suggest that well-designed online biology courses can be effective at promoting student learning. Three recommendations for effective online instruction in biology are given: the inclusion of an online orientation to acclimate students to the online classroom; student-instructor and student-student interactions facilitated through synchronous and asynchronous communication; and elements that prompt student reflection and self-assessment. We conclude that well-designed online biology courses can be as effective as their traditional counterparts, but that more research is needed to elucidate specific course elements and structures that can maximize online students’ learning of key biology skills and concepts. PMID:28101268

Traditional Versus Online Biology Courses: Connecting Course Design and Student Learning in an Online Setting.

PubMed

Biel, Rachel; Brame, Cynthia J

2016-12-01

Online courses are a large and growing part of the undergraduate education landscape, but many biology instructors are skeptical about the effectiveness of online instruction. We reviewed studies comparing the effectiveness of online and face-to-face (F2F) undergraduate biology courses. Five studies compared student performance in multiple course sections at community colleges, while eight were smaller scale and compared student performance in particular biology courses at a variety of types of institutions. Of the larger-scale studies, two found that students in F2F sections outperformed students in online sections, and three found no significant difference; it should be noted, however, that these studies reported little information about course design. Of the eight smaller scale studies, six found no significant difference in student performance between the F2F and online sections, while two found that the online sections outperformed the F2F sections. In alignment with general findings about online teaching and learning, these results suggest that well-designed online biology courses can be effective at promoting student learning. Three recommendations for effective online instruction in biology are given: the inclusion of an online orientation to acclimate students to the online classroom; student-instructor and student-student interactions facilitated through synchronous and asynchronous communication; and elements that prompt student reflection and self-assessment. We conclude that well-designed online biology courses can be as effective as their traditional counterparts, but that more research is needed to elucidate specific course elements and structures that can maximize online students' learning of key biology skills and concepts.

Nurse teacher models in clinical education from the perspective of student nurses--A mixed method study.

PubMed

Gustafsson, Margareta; Kullén Engström, Agneta; Ohlsson, Ulla; Sundler, Annelie J; Bisholt, Birgitta

2015-12-01

The aim was to describe and compare the clinical teacher's role in different models of clinical practice from the perspective of student nurses. The study took place in collaboration with two Swedish universities that applied different educational models in clinical practice. A mixed method approach was used. The quantitative part had a comparative design and the qualitative part had a descriptive design. The study group consisted of 114 student nurses (response rate 87%). Fifty-three of them had met clinical teachers employed at the university and not participating in the daily clinical work (University Nurse Teachers, UNTs), whilst 61 had met clinical teachers dividing their time between teaching and nursing (Clinical Nurse Teachers, CNTs). Eight students participated in the qualitative part of the study. A questionnaire including the CLES+T scale was used to ascertain the students' perception of the clinical teacher's role, complemented by interviews directed towards an enrichment of this perception. Students meeting CNTs agreed more strongly than those meeting UNTs that the teacher had the ability to help them integrate theory and practice. Whilst spontaneous meetings between students and CNTs occurred, students mostly met UNTs in seminars. Students meeting UNTs felt alone but did appreciate having someone outside the clinical environment to provide support if they did not get along with their preceptor. In the case of UNTs, it is important that they keep their knowledge of clinical issues updated and visit the clinical placement not only for seminars but also to give students emotional support. In the case of CNTs, it is important that they are members of the faculty at the university, take part in the planning of the clinical courses and are able to explain the learning goals to the students. Copyright © 2015 Elsevier Ltd. All rights reserved.

An overview of passenger equipment fullscale impact tests : results to date

DOT National Transportation Integrated Search

2001-11-25

As part of the Federal Railroad Administrations Equipment Safety Research Program, a series of full-scale impact tests are being conducted on rail passenger vehicles. Three tests are intended to define the performance of current-design equipment i...

Bridge-in-a-Backpack(TM). Task 4 : monitoring and load rating.

DOT National Transportation Integrated Search

2015-01-01

Five bridges were constructed utilizing UMaines hybrid composite arch technology as part of the Maine : Department of Transportations Composites Initiative. Three were constructed in 2010, one in 2011 and the final : one in 2012. The designs fo...

Field scale test of multi-dimensional flow and morphodynamic simulations used for restoration design analysis

USGS Publications Warehouse

McDonald, Richard R.; Nelson, Jonathan M.; Fosness, Ryan L.; Nelson, Peter O.; Constantinescu, George; Garcia, Marcelo H.; Hanes, Dan

2016-01-01

Two- and three-dimensional morphodynamic simulations are becoming common in studies of channel form and process. The performance of these simulations are often validated against measurements from laboratory studies. Collecting channel change information in natural settings for model validation is difficult because it can be expensive and under most channel forming flows the resulting channel change is generally small. Several channel restoration projects designed in part to armor large meanders with several large spurs constructed of wooden piles on the Kootenai River, ID, have resulted in rapid bed elevation change following construction. Monitoring of these restoration projects includes post- restoration (as-built) Digital Elevation Models (DEMs) as well as additional channel surveys following high channel forming flows post-construction. The resulting sequence of measured bathymetry provides excellent validation data for morphodynamic simulations at the reach scale of a real river. In this paper we test the performance a quasi-three-dimensional morphodynamic simulation against the measured elevation change. The resulting simulations predict the pattern of channel change reasonably well but many of the details such as the maximum scour are under predicted.

Comparative study of high voltage bushing designs suitable for apparatus containing cryogenic helium gas

NASA Astrophysics Data System (ADS)

Rodrigo, H.; Graber, L.; Kwag, D. S.; Crook, D. G.; Trociewitz, B.

2013-10-01

The high voltage bushing forms a critical part of any termination on cables, transformers and other power system devices. Cryogenic entities such as superconducting cables or fault current limiters add more complexity to the design of the bushing. Even more complex are bushings designed for superconducting devices which are cooled by high pressure helium gas. When looking for a bushing suitable for dielectric cable tests in a helium gas cryostat no appropriate device could be found that fulfilled the criterion regarding partial discharge inception voltage level. Therefore we decided to design and manufacture a bushing in-house. In the present work we describe the dielectric tests and operational experience on three types of bushings: One was a modified commercially available ceramics feed through which we adopted for our special need. The second bushing was made of an epoxy resin, with an embedded copper squirrel cage arrangement at the flange, extending down about 30 cm into the cold end of the bushing. This feature reduced the electric field on the surface of the bushing to a negligible value. The third bushing was based on a hollow body consisting of glass fiber reinforced polymer and stainless steel filled with liquid nitrogen. The measurements showed that the dielectric quality of all three bushings exceeded the requirements for the intended purpose. The partial discharge (PD) data from these studies will be used for the design and fabrication of a cable termination for a specialized application on board a US Navy ship.

RAID-2: Design and implementation of a large scale disk array controller

NASA Technical Reports Server (NTRS)

Katz, R. H.; Chen, P. M.; Drapeau, A. L.; Lee, E. K.; Lutz, K.; Miller, E. L.; Seshan, S.; Patterson, D. A.

1992-01-01

We describe the implementation of a large scale disk array controller and subsystem incorporating over 100 high performance 3.5 inch disk drives. It is designed to provide 40 MB/s sustained performance and 40 GB capacity in three 19 inch racks. The array controller forms an integral part of a file server that attaches to a Gb/s local area network. The controller implements a high bandwidth interconnect between an interleaved memory, an XOR calculation engine, the network interface (HIPPI), and the disk interfaces (SCSI). The system is now functionally operational, and we are tuning its performance. We review the design decisions, history, and lessons learned from this three year university implementation effort to construct a truly large scale system assembly.

The size distribution of interstellar grains

NASA Technical Reports Server (NTRS)

Witt, Adolf N.

1987-01-01

Three major areas involving interstellar grains were investigated. First, studies were performed of scattering in reflection nebulae with the goal of deriving scattering characteristics of dust grains such as the albedo and the phase function asymmetry throughout the visible and the ultraviolet. Secondly, studies were performed of the wavelength dependence of interstellar extinction designed to demonstrate the wide range of grain size distributions naturally occurring in individual clouds in different parts of the galaxy. And thirdly, studies were also performed of the ultraviolet powered emission of dust grains in the 0.5 to 1.0 micron wavelength range in reflection nebulae. Findings considered of major importance are highlighted.

Effects of simulated weightlessness on mammalian development. Part 1: Development of clinostat for mammalian tissue culture and use in studies on meiotic maturation of mouse oocytes

NASA Technical Reports Server (NTRS)

Wolegemuth, D. J.; Grills, G. S.

1984-01-01

The effects of weightlessness on three aspects of mammalian reproduction: oocyte development, fertilization, and early embryogenesis was studied. Zero-gravity conditions within the laboratory by construction of a clinostat designed to support in vitro tissue culture were simulated and the effects of simulated weightlessness on meiotic maturation in mammalian oocytes using mouse as the model system were studied. The timing and frequency of germinal vesicule breakdown and polar body extrusion, and the structural and numerical properties of meiotic chromosomes at Metaphase and Metaphase of meiosis are assessed.

Engine Development Design Margins Briefing Charts

NASA Technical Reports Server (NTRS)

Bentz, Chuck

2006-01-01

New engines experience durability problems after entering service. The most prevalent and costly is the hot section, particularly the high-pressure turbine. The origin of durability problems can be traced back to: 1) the basic aero-mechanical design systems, assumptions, and design margins used by the engine designers, 2) the available materials systems, and 3) to a large extent, aggressive marketing in a highly competitive environment that pushes engine components beyond the demonstrated capability of the basic technology available for the hardware designs. Unfortunately the user must operate the engine in the service environment in order to learn the actual thrust loading and the time at max effort take-off conditions used in service are needed to determine the hot section life. Several hundred thousand hours of operational service will be required before the demonstrated reliability of a fleet of engines or the design deficiencies of the engine hot section parts can be determined. Also, it may take three to four engine shop visits for heavy maintenance on the gas path hardware to establish cost effective build standards. Spare parts drive the oerator's engine maintenance costs but spare parts also makes lots of money for the engine manufacturer during the service life of an engine. Unless competition prevails for follow-on engine buys, there is really no motivation for an OEM to spend internal money to improve parts durability and reduce earnings derived from a lucrative spare parts business. If the hot section life is below design goals or promised values, the OEM migh argue that the engine is being operated beyond its basic design intent. On the other hand, the airframer and the operator will continue to remind the OEM that his engine was selected based on a lot of promises to deliver spec thrust with little impact on engine service life if higher thrust is used intermittently. In the end, a standoff prevails and nothing gets fixed. This briefing will propose ways to hold competing engine manufacturers more accountable for engine hot section design margins during the entire Engine Development process as well as provide tools to assess the design temperature margins in the hot section parts of Service Engines.

Automatic Design of Synthetic Gene Circuits through Mixed Integer Non-linear Programming

PubMed Central

Huynh, Linh; Kececioglu, John; Köppe, Matthias; Tagkopoulos, Ilias

2012-01-01

Automatic design of synthetic gene circuits poses a significant challenge to synthetic biology, primarily due to the complexity of biological systems, and the lack of rigorous optimization methods that can cope with the combinatorial explosion as the number of biological parts increases. Current optimization methods for synthetic gene design rely on heuristic algorithms that are usually not deterministic, deliver sub-optimal solutions, and provide no guaranties on convergence or error bounds. Here, we introduce an optimization framework for the problem of part selection in synthetic gene circuits that is based on mixed integer non-linear programming (MINLP), which is a deterministic method that finds the globally optimal solution and guarantees convergence in finite time. Given a synthetic gene circuit, a library of characterized parts, and user-defined constraints, our method can find the optimal selection of parts that satisfy the constraints and best approximates the objective function given by the user. We evaluated the proposed method in the design of three synthetic circuits (a toggle switch, a transcriptional cascade, and a band detector), with both experimentally constructed and synthetic promoter libraries. Scalability and robustness analysis shows that the proposed framework scales well with the library size and the solution space. The work described here is a step towards a unifying, realistic framework for the automated design of biological circuits. PMID:22536398

Impact of Medicare Part D on Antidepressant Treatment, Medication Choice and Adherence among Older Adults with Depression

PubMed Central

Donohue, Julie M.; Zhang, Yuting; Men, Aiju; Perera, Subashan; Lave, Judith R.; Hanlon, Joseph T.; Reynolds, Charles F.

2010-01-01

Objectives Depression in older adults is often undertreated due, in part, to medication costs. We examined the impact of improved prescription drug coverage under Medicare Part D on use of antidepressants, medication choice and adherence. Design, Setting and Participants Observational claims-based study of older adults with depression (ICD-9: 296.2, 296.3, 311, 300.4) continuously enrolled in a Medicare managed care plan between 2004–2007. Three groups with limited ($150 or $350 quarterly caps) or no drug coverage in 2004–2005 obtained Part D benefits in 2006. A comparison group had stable employer-sponsored coverage throughout. Measurements Any antidepressant prescription fill, antidepressant choice (tricyclics or monoamine oxidase inhibitors vs. newer antidepressants), and adherence (80% of days covered) in the first 6 months of treatment. Results Part D was associated with increased odds of any antidepressant use among those who previously lacked coverage [Odds Ratio (OR) 1.61, 95% confidence interval (CI) 1.41–1.85] but odds of use did not change among those with limited prior coverage. Use of older antidepressant agents did not change with Part D. All three groups whose coverage improved with Part D had significantly higher odds of 80% of days covered with an antidepressant [OR=1.86 (95% CI, 1.44–2.39) for No coverage, 1.74 (95% CI, 1.25–3.42) for $150 cap; and 1.19 (95% CI 1.06–1.34) for the $350 cap groups]. Conclusions Medicare Part D was associated with improvements in antidepressant use and adherence in depressed older adults who previously had no or limited drug coverage but not with changes in use of older agents. PMID:22123272

The Vanderbilt Professional Nursing Practice Program: part 1: Growing and supporting professional nursing practice.

PubMed

Robinson, Karen; Eck, Carol; Keck, Becky; Wells, Nancy

2003-09-01

Professional practice programs are designed to attract, retain, and reward nurses. This three-part series will describe Vanderbilt's performance-based career advancement system, the Vanderbilt Professional Nursing Practice Program (VPNPP). Part 1 outlines the overall program's foundation, philosophical background, and basic structure. The VPNPP is built upon Benner's work, distinguishing among four levels of practice: novice, competent, proficient, and expert. Work by many in the organization identified the expected behaviors for nurses at each level, which were then used to develop clear process evaluation criteria. Part 2 will examine the performance measurement and evaluation system created to support the program. The process of advancing within the program will be described in part 3.

[Computer aided design for fixed partial denture framework based on reverse engineering technology].

PubMed

Sun, Yu-chun; Lü, Pei-jun; Wang, Yong

2006-03-01

To explore a computer aided design (CAD) route for the framework of domestic fixed partial denture (FPD) and confirm the suitable method of 3-D CAD. The working area of a dentition model was scanned with a 3-D mechanical scanner. Using the reverse engineering (RE) software, margin and border curves were extracted and several reference curves were created to ensure the dimension and location of pontic framework that was taken from the standard database. The shoulder parts of the retainers were created after axial surfaces constructed. The connecting areas, axial line and curving surface of the framework connector were finally created. The framework of a three-unit FPD was designed with RE technology, which showed smooth surfaces and continuous contours. The design route is practical. The result of this study is significant in theory and practice, which will provide a reference for establishing the computer aided design/computer aided manufacture (CAD/CAM) system of domestic FPD.

Comparative Evaluation of Conventional and Accelerated Castings on Marginal Fit and Surface Roughness

PubMed Central

Jadhav, Vivek Dattatray; Motwani, Bhagwan K.; Shinde, Jitendra; Adhapure, Prasad

2017-01-01

Aims: The aim of this study was to evaluate the marginal fit and surface roughness of complete cast crowns made by a conventional and an accelerated casting technique. Settings and Design: This study was divided into three parts. In Part I, the marginal fit of full metal crowns made by both casting techniques in the vertical direction was checked, in Part II, the fit of sectional metal crowns in the horizontal direction made by both casting techniques was checked, and in Part III, the surface roughness of disc-shaped metal plate specimens made by both casting techniques was checked. Materials and Methods: A conventional technique was compared with an accelerated technique. In Part I of the study, the marginal fit of the full metal crowns as well as in Part II, the horizontal fit of sectional metal crowns made by both casting techniques was determined, and in Part III, the surface roughness of castings made with the same techniques was compared. Statistical Analysis Used: The results of the t-test and independent sample test do not indicate statistically significant differences in the marginal discrepancy detected between the two casting techniques. Results: For the marginal discrepancy and surface roughness, crowns fabricated with the accelerated technique were significantly different from those fabricated with the conventional technique. Conclusions: Accelerated casting technique showed quite satisfactory results, but the conventional technique was superior in terms of marginal fit and surface roughness. PMID:29042726

Collaborated measurement of three-dimensional position and orientation errors of assembled miniature devices with two vision systems

NASA Astrophysics Data System (ADS)

Wang, Xiaodong; Zhang, Wei; Luo, Yi; Yang, Weimin; Chen, Liang

2013-01-01

In assembly of miniature devices, the position and orientation of the parts to be assembled should be guaranteed during or after assembly. In some cases, the relative position or orientation errors among the parts can not be measured from only one direction using visual method, because of visual occlusion or for the features of parts located in a three-dimensional way. An automatic assembly system for precise miniature devices is introduced. In the modular assembly system, two machine vision systems were employed for measurement of the three-dimensionally distributed assembly errors. High resolution CCD cameras and high position repeatability precision stages were integrated to realize high precision measurement in large work space. The two cameras worked in collaboration in measurement procedure to eliminate the influence of movement errors of the rotational or translational stages. A set of templates were designed for calibration of the vision systems and evaluation of the system's measurement accuracy.

Using task analysis in healthcare design to improve clinical efficiency.

PubMed

Lu, Jun; Hignett, Sue

2009-01-01

To review the functionality of the proposed soiled workroom design for efficient and safe clinical activities. As part of a hospital refurbishment program, the planning team of a United Kingdom National Health Service hospital requested a review of a proposed standardized room design. A 7-day observational study was conducted in five clinical departments at three hospitals. Link analysis was used to record and analyze the movements among components, i.e., nursing staff, equipment/devices, and furniture. Fifty-four observations were recorded for 18 clinical tasks. The most frequent tasks were the disposal of urine and used urine bottles, and returning used commode chairs. Minor recommendations were made to improve the proposed design, and major revisions were suggested to address functionality problems. It was found that the proposed design did not offer the optimal layout for efficient and safe clinical activities. Link analysis was found to be effective for plotting the movements of the staff and accounting for the complexity of tasks. This ergonomic method, in combination with observational field studies, provided a simple and effective way to determine functional space requirements for clinical activities and should be used in all healthcare building design projects.

Design Considerations for Large Computer Communication Networks,

DTIC Science & Technology

1976-04-01

particular, we will discuss the last three assumptions in order to motivate some of the models to be considered in this chapter. Independence Assumption...channels. fg Part (a), again motivated by an earlier remark on deterministic routing, will become more accurate when we include in the model, based on fixed...hierarchical routing, then this assumption appears to be quite acceptable. Part (b) is motivated by the quite symmetrical structure of the networks considered

Thermo-chemical modelling of a village cookstove for design improvement

NASA Astrophysics Data System (ADS)

Honkalaskar, Vijay H.; Sohoni, Milind; Bhandarkar, Upendra V.

2014-05-01

Cookstove operation comprises three basic processes, namely combustion of firewood, natural air draft due to the buoyancy induced by the temperature difference between the hearth and its surroundings, and heat transfer to the pot, stove body and surrounding atmosphere. Owing to the heterogenous and unsteady burning of solid fuel, there exist nonlinear and dynamic interrelationships among these process parameters. A steady-state analytical model of the cookstove operation is developed for its design improvement by splitting the hearth into three zones to study char combustion, volatile combustion and heat transfer to the pot bottom separately. It comprises a total of seven relations corresponding to a thorough analysis of the three basic processes. A novel method is proposed to model the combustion of wood to mimic the realities closely. Combustion space above the fuel bed is split into 1000 discrete parts to study the combustion of volatiles by considering a set of representative volatile gases. Model results are validated by comparing them with a set of water boiling tests carried on a traditional cookstove in the laboratory. It is found that the major thrust areas to improve the thermal performance are combustion of volatiles and the heat transfer to the pot. It is revealed that the existing design dimensions of the traditional cookstove are close to their optimal values. Addition of twisted-tape inserts in the hearth of the cookstove shows an improvement in the thermal performance due to increase in the heat transfer coefficient to the pot bottom and improved combustion of volatiles.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Thermoplastic Composites: Weight and Cost Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Fifield, Leonard S.; Gandhi, Umesh N.

This project proposed to integrate, optimize and validate the fiber orientation and length distribution models previously developed and implemented in the Autodesk Simulation Moldflow Insight (ASMI) package for injection-molded long-carbon-fiber thermoplastic composites into a cohesive prediction capability. The current effort focused on rendering the developed models more robust and efficient for automotive industry part design to enable weight savings and cost reduction. The project goal has been achieved by optimizing the developed models, improving and integrating their implementations in ASMI, and validating them for a complex 3D LCF thermoplastic automotive part (Figure 1). Both PP and PA66 were used asmore » resin matrices. After validating ASMI predictions for fiber orientation and fiber length for this complex part against the corresponding measured data, in collaborations with Toyota and Magna PNNL developed a method using the predictive engineering tool to assess LCF/PA66 complex part design in terms of stiffness performance. Structural three-point bending analyses of the complex part and similar parts in steel were then performed for this purpose, and the team has then demonstrated the use of stiffness-based complex part design assessment to evaluate weight savings relative to the body system target (≥ 35%) set in Table 2 of DE-FOA-0000648 (AOI #1). In addition, starting from the part-to-part analysis, the PE tools enabled an estimated weight reduction for the vehicle body system using 50 wt% LCF/PA66 parts relative to the current steel system. Also, from this analysis an estimate of the manufacturing cost including the material cost for making the equivalent part in steel has been determined and compared to the costs for making the LCF/PA66 part to determine the cost per “saved” pound.« less

Comparison of safety effect estimates obtained from empirical Bayes before-after study, propensity scores-potential outcomes framework, and regression model with cross-sectional data.

PubMed

Wood, Jonathan S; Donnell, Eric T; Porter, Richard J

2015-02-01

A variety of different study designs and analysis methods have been used to evaluate the performance of traffic safety countermeasures. The most common study designs and methods include observational before-after studies using the empirical Bayes method and cross-sectional studies using regression models. The propensity scores-potential outcomes framework has recently been proposed as an alternative traffic safety countermeasure evaluation method to address the challenges associated with selection biases that can be part of cross-sectional studies. Crash modification factors derived from the application of all three methods have not yet been compared. This paper compares the results of retrospective, observational evaluations of a traffic safety countermeasure using both before-after and cross-sectional study designs. The paper describes the strengths and limitations of each method, focusing primarily on how each addresses site selection bias, which is a common issue in observational safety studies. The Safety Edge paving technique, which seeks to mitigate crashes related to roadway departure events, is the countermeasure used in the present study to compare the alternative evaluation methods. The results indicated that all three methods yielded results that were consistent with each other and with previous research. The empirical Bayes results had the smallest standard errors. It is concluded that the propensity scores with potential outcomes framework is a viable alternative analysis method to the empirical Bayes before-after study. It should be considered whenever a before-after study is not possible or practical. Copyright © 2014 Elsevier Ltd. All rights reserved.

Studies on effects of infills in seismic resistant R/C construction

NASA Astrophysics Data System (ADS)

Brokken, S. T.; Bertero, V. V.

1981-10-01

Experimental and analytical studies of the quantitative effects of infills in the seismic performance of buildings (particularly in buildings whose structural systems are based on the use of moment resisting frames alone are summarized); and the implications of these effects regarding the design of new buildings and retrofitting of existing R/C frame structures were evaluated. The first part is concerned with the infill problem and the experimental investigation conducted to study the effects of infill panels on seismic response of reinforced concrete frames. This investigation consisted of a series of quasi-static cyclic and monotonic load tests on 1/3-scale models of the lower 3-1/2 stories of an 11 story-three bay reinforced concrete frame infilled in the outer two bays. The reinforced concrete moment frame was designed for high rotational ductility and resistance to degradation under reversed cyclic shear loads.

Meteorology--An Interdisciplinary Base for Science Learning.

ERIC Educational Resources Information Center

Howell, David C.

1980-01-01

Described is a freshman science program at Deerfield Academy (Deerfield, Mass.) in meteorology, designed as the first part of a three-year unified science sequence. Merits of the course, in which particular emphasis is placed on observation skills and making predictions, are enumerated. (CS)

A Guide to Promising Practices in Educational Partnerships.

ERIC Educational Resources Information Center

Bodinger-deUriarte, Cristina; And Others

This guide, which is designed for individuals interested in establishing joint endeavors among schools, social service agencies, cultural institutions, businesses, industries, and/or institutions of higher education, illustrates promising practices supporting and reflecting partnership activities. Part 1 is divided into three sections detailing…

Aircraft Wake Vortex Core Size Measurements

DOT National Transportation Integrated Search

2003-06-23

We have examined data from three aircraft field tests designed, in part, to measure the size of the vortex cores generated by the aircraft. The field tests were performed between 1990 and 1997 at Idaho Falls, ID, Wallops Island, : VA, and John F. Ken...

Social Learning Analytics

ERIC Educational Resources Information Center

Buckingham Shum, Simon; Ferguson, Rebecca

2012-01-01

We propose that the design and implementation of effective "Social Learning Analytics (SLA)" present significant challenges and opportunities for both research and enterprise, in three important respects. The first is that the learning landscape is extraordinarily turbulent at present, in no small part due to technological drivers.…

A structurally decoupled mechanism for measuring wrist torque in three degrees of freedom

NASA Astrophysics Data System (ADS)

Pan, Lizhi; Yang, Zhen; Zhang, Dingguo

2015-10-01

The wrist joint is a critical part of the human body for movement. Measuring the torque of the wrist with three degrees of freedom (DOFs) is important in some fields, including rehabilitation, biomechanics, ergonomics, and human-machine interfacing. However, the particular structure of the wrist joint makes it difficult to measure the torque in all three directions simultaneously. This work develops a structurally decoupled instrument for measuring and improving the measurement accuracy of 3-DOF wrist torque during isometric contraction. Three single-axis torque sensors were embedded in a customized mechanical structure. The dimensions and components of the instrument were designed based on requirement of manufacturability. A prototype of the instrument was machined, assembled, integrated, and tested. The results show that the structurally decoupled mechanism is feasible for acquiring wrist torque data in three directions either independently or simultaneously. As a case study, we use the device to measure wrist torques concurrently with electromyography signal acquisition in preparation for simultaneous and proportional myoelectric control of prostheses.

A structurally decoupled mechanism for measuring wrist torque in three degrees of freedom.

PubMed

Pan, Lizhi; Yang, Zhen; Zhang, Dingguo

2015-10-01

The wrist joint is a critical part of the human body for movement. Measuring the torque of the wrist with three degrees of freedom (DOFs) is important in some fields, including rehabilitation, biomechanics, ergonomics, and human-machine interfacing. However, the particular structure of the wrist joint makes it difficult to measure the torque in all three directions simultaneously. This work develops a structurally decoupled instrument for measuring and improving the measurement accuracy of 3-DOF wrist torque during isometric contraction. Three single-axis torque sensors were embedded in a customized mechanical structure. The dimensions and components of the instrument were designed based on requirement of manufacturability. A prototype of the instrument was machined, assembled, integrated, and tested. The results show that the structurally decoupled mechanism is feasible for acquiring wrist torque data in three directions either independently or simultaneously. As a case study, we use the device to measure wrist torques concurrently with electromyography signal acquisition in preparation for simultaneous and proportional myoelectric control of prostheses.

Continuing professional education: Motivations and experiences of health and social care professional's part-time study in higher education. A qualitative literature review.

PubMed

Burrow, Simon; Mairs, Hilary; Pusey, Helen; Bradshaw, Timothy; Keady, John

2016-11-01

To understand the motivations and experiences of health and social care professionals undertaking part-time, accredited, continuing professional education in higher education. A review following systematic principles. Systematic searches for literature published between January 2000 and December 2015 using the databases: SCOPUS, Web of Science, Medline, PsychINFO, Social Policy and Practice and CINAHL. Studies were included if they were published in the English language and were qualitative in design, focussing on the motivations and experiences of staff engaged in part-time, accredited, higher education study. Three reviewers appraised the quality of the selected studies. Thirteen qualitative studies were identified for the review. Motivating factors for staff to engage in part-time, accredited, continuing professional development study included: personal and professional drivers, influence of workplace/management and funding and availability. Key themes in relation to how staff experienced study included: the demands of adjusting to the academic requirements of higher education study; the experience of juggling competing demands of study, work and family; and the presence or absence of support for part-time study in the personal and professional arenas. Health and social care professionals experience a number of challenges when engaging in part-time, continuing professional education in higher education institutions. A significant challenge is the juggling of competing demands of study, work and family, and this may have a negative impact on learning. Research is needed to inform how higher education can address the specific learning needs of this population and develop pedagogic approaches that are both responsive to need and support of effective learning. Copyright © 2016 Elsevier Ltd. All rights reserved.

One Approach to the Synthesis, Design and Manufacture of Hyperboloid Gear Sets With Face Mating Gears. Part 1: Basic Theoretical and Cad Experience

NASA Astrophysics Data System (ADS)

Abadjiev, Valentin; Abadjieva, Emilia

2016-06-01

Hyperboloid gear drives with face mating gears are used to transform rotations between shafts with non-parallel and non-intersecting axes. A special case of these transmissions are Spiroid and Helicon gear drives. The classical gear drives of this type are the Archimedean ones. The objective of this study are hyperboloid gear drives with face meshing, when the pinion possesses threads of conic convolute, Archimedean and involute types, or the pinion has threads of cylindrical convolute, Archimedean and involute types. For simplicity, all three types transmis- sions with face mating gears and a conic pinion are titled Spiroid and all three types transmissions with face mating gears and a cylindrical pinion are titled Helicon. Principles of the mathematical modelling of tooth contact synthesis are discussed in this study. The presented research shows that the synthesis is realized by application of two mathematical models: pitch contact point and mesh region models. Two approaches for synthesis of the gear drives in accordance with Olivier's principles are illustrated. The algorithms and computer programs for optimization synthesis and design of the studied hyperboloid gear drives are presented.

Framsticks

NASA Astrophysics Data System (ADS)

Komosinski, Maciej; Ulatowski, Szymon

Life is one of the most complex phenomena known in our world. Researchers construct various models of life that serve diverse purposes and are applied in a wide range of areas — from medicine to entertainment. A part of artificial life research focuses on designing three-dimensional (3D) models of life-forms, which are obviously appealing to observers because the world we live in is three dimensional. Thus, we can easily understand behaviors demonstrated by virtual individuals, study behavioral changes during simulated evolution, analyze dependencies between groups of creatures, and so forth. However, 3D models of life-forms are not only attractive because of their resemblance to the real-world organisms. Simulating 3D agents has practical implications: If the simulation is accurate enough, then real robots can be built based on the simulation, as in [22]. Agents can be designed, tested, and optimized in a virtual environment, and the best ones can be constructed as real robots with embedded control systems. This way artificial intelligence algorithms can be “embodied” in the 3D mechanical constructs.

The tale of hearts and reason: the influence of mood on decision making.

PubMed

Laborde, Sylvain; Raab, Markus

2013-08-01

In decision-making research, one important aspect of real-life decisions has so far been neglected: the mood of the decision maker when generating options. The authors tested the use of the take-the-first (TTF) heuristic and extended the TTF model to understand how mood influences the option-generation process of individuals in two studies, the first using a between-subjects design (30 nonexperts, 30 near-experts, and 30 experts) and the second conceptually replicating the first using a within-subject design (30 nonexperts). Participants took part in an experimental option-generation task, with 31 three-dimensional videos of choices in team handball. Three moods were elicited: positive, neutral, and negative. The findings (a) replicate previous results concerning TTF and (b) show that the option-generation process was associated with the physiological component of mood, supporting the neurovisceral integration model. The extension of TTF to processing emotional factors is an important step forward in explaining fast choices in real-life situations.

Alexithymia and affective verbal behaviour of three groups of patients.

PubMed

Ahrens, S

1985-01-01

The study described in this article was designed to investigate patients' response to affective stimuli on two levels of measurement: one was designed to yield information about cognitive attribution processes whereas the second level was aimed at uncovering deeper, more unconscious responses to the given stimuli. These were displayed as part of an experimental setting, in which three groups were compared: psychosomatic (duodenal ulcer), somatic and psychoneurotic patients. Systematic variation was introduced by showing either of two versions of a short film which differed in the degree of friendliness displayed by the main character. The results show differential effects on the two levels of measurement: in the case of the first level, an interpretation within the framework of current conceptualizations of alexithymia would have been possible, but results for the second level of measurement (utilizing Gottschalk-Gleser content analysis of speech) indicate that psychosomatic patients show the same kind of sensitive response to affective stimuli as patients from the other two groups.

Reading Students' Minds: Design Assessment in Distance Education

ERIC Educational Resources Information Center

Jones, Derek

2014-01-01

This paper considers the design of assessment for students of design according to behaviourist versus experiential pedagogical approaches, relating these to output-oriented as opposed to process-oriented assessment methods. It is part case study and part recognition of the importance of process in design education and how this might be applied in…

Design of 3D-Printed Titanium Compliant Mechanisms

NASA Technical Reports Server (NTRS)

Merriam, Ezekiel G.; Jones, Jonathan E.; Howell, Larry L.

2014-01-01

This paper describes 3D-printed titanium compliant mechanisms for aerospace applications. It is meant as a primer to help engineers design compliant, multi-axis, printed parts that exhibit high performance. Topics covered include brief introductions to both compliant mechanism design and 3D printing in titanium, material and geometry considerations for 3D printing, modeling techniques, and case studies of both successful and unsuccessful part geometries. Key findings include recommended flexure geometries, minimum thicknesses, and general design guidelines for compliant printed parts that may not be obvious to the first time designer.

'I want to feel at home': establishing what aspects of environmental design are important to people with dementia nearing the end of life.

PubMed

Fleming, Richard; Kelly, Fiona; Stillfried, Gillian

2015-05-12

The design of environments in which people with dementia live should be understandable, reinforce personal identity and maintain their abilities. The focus on supporting people with dementia to live well has omitted considering the needs or wishes for a supportive physical environment of those who are nearing the end of their lives. Using a combination of focus groups and a Delphi survey, this study explored the views of people with dementia, family carers and professionals on what aspects of the physical environment would be important to support a good quality of life to the very end. Three focus groups were carried out in three cities along the East Coast of Australia using a discussion guide informed by a literature review. Focus groups comprised recently bereaved family carers of people with dementia (FG1), people with dementia and family carers of people with dementia (FG2) and practitioners caring for people with dementia nearing or at the end of their lives (FG3). Focus group conversations were audio-recorded with participants' consent. Audio files were transcribed verbatim and analysed thematically to identify environmental features that could contribute to achieving the goal of providing a comfortable life to the end. A list of design features derived from analysis of focus group transcripts was distributed to a range of experts in the dementia field and a consensus sought on their appropriateness. From this, a set of features to inform the design of environments for people with dementia nearing the end of life was defined. Eighteen people took part in three focus groups: two with dementia, eleven current or recently bereaved family carers and five practitioners. There were differences in opinion on what were important environmental considerations. People with dementia and family carers identified comfort through engagement, feeling at home, a calm environment, privacy and dignity and use of technology to remain connected as important. For practitioners, design to facilitate duty of care and institutional influences on their practice were salient themes. Twenty one experts in the dementia field took part in the survey to agree a consensus on the desirable features derived from analysis of focus group transcripts, with fifteen features agreed. The fifteen features are compatible with the design principles for people with dementia who are mobile, but include a stronger focus on sensory engagement. We suggest that considering these features as part of a continuum of care will support good practice and offer those with dementia the opportunity to live well until the end and give their families a more positive experience in the last days of their lives together.

Machine Learning: A Crucial Tool for Sensor Design

PubMed Central

Zhao, Weixiang; Bhushan, Abhinav; Santamaria, Anthony D.; Simon, Melinda G.; Davis, Cristina E.

2009-01-01

Sensors have been widely used for disease diagnosis, environmental quality monitoring, food quality control, industrial process analysis and control, and other related fields. As a key tool for sensor data analysis, machine learning is becoming a core part of novel sensor design. Dividing a complete machine learning process into three steps: data pre-treatment, feature extraction and dimension reduction, and system modeling, this paper provides a review of the methods that are widely used for each step. For each method, the principles and the key issues that affect modeling results are discussed. After reviewing the potential problems in machine learning processes, this paper gives a summary of current algorithms in this field and provides some feasible directions for future studies. PMID:20191110

Reference aircraft for ICAO Working Group E

NASA Technical Reports Server (NTRS)

1978-01-01

The results of an advanced supersonic transport aircraft/engine integration study to be used as a detail preliminary design case to assist in the assessment of noise standards applicable to future supersonic transports are summarized. The design considered reflects the application of the advanced technologies which are projected to be available for program initiation in the 1980-1985 time period. Suppression characteristics included were obtained in simulated forward flight in the Rolls-Royce spin rig using a small scale model. The engine size selected produces a noise no greater than 108 EPNdB at any of the three Far Part 36 (Stage 2) defined measuring points and is sized slightly larger than the optimum cruise size to meet this noise constraint condition.

Strength Enhancement of Car Front Bumper for Slow Speed Impact by FEA Method as per IIHS Regulation

NASA Astrophysics Data System (ADS)

Sonawane, Chandrakant Rameshchandra; Shelar, Ajit Lavaji

2017-05-01

Low speed collisions happen significantly due to on road slow moving heavy traffic as well as during parking of vehicles. The bumpers are provided in front and back side of a vehicle has two main purposes: first is to absorb the energy generated during these kinds of slow speed impacts and secondly to protect the expensive parts like main engine parts, radiators and connected engine cooling mechanism, headlights, taillights, etc, by slowing down the vehicles. The problem often in various cars bumper is that they doesn't line-up vertically during low speed impact and leads to damage of various parts which are costly to repair. Many a times bumper design does not have sufficient capacity to absorb the energy generated during these impact. Guideline by International Institute Highway Safety (IIHS) regulation provides useful insight for such low speed impact study. In this paper, slow speed impact test were conducted as per IIHS regulation in three positions namely central impact, left hand corner impact and right hand corner impact. Parameters including bumper material, shape, thickness and impact condition are analyzed using fine element analysis (FEA) to enhance crashworthiness design in low speed impact. Then the vehicle front structure has been modified suitably. It has been observed that lining up the front metal bumper with suitable stiffness provides the best result which ultimately reduces the damage to the vehicle parts.

Best Bang for the Buck: Part 2 – Choosing Between Different Sized Designs

DOE PAGES

Anderson-Cook, Christine Michaela; Lu, Lu

2016-11-01

Last month, we considered four potential designs of varying sizes and a variety of their attributes for an engineering problem involving a screening design with seven factors. The engineer’s original request was to find a design with 14 runs that could estimate all of the main effects, as well as have some potential for finding important two-factor interactions and possibly curvature in the underlying surface. This assessment was that the proposed size of design was potentially a bit too ambitious for the experiment’s goals, so we explored three other competing designs that had slightly larger sizes but were able tomore » improve several aspects of the design.« less

Best Bang for the Buck: Part 2 – Choosing Between Different Sized Designs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson-Cook, Christine Michaela; Lu, Lu

Last month, we considered four potential designs of varying sizes and a variety of their attributes for an engineering problem involving a screening design with seven factors. The engineer’s original request was to find a design with 14 runs that could estimate all of the main effects, as well as have some potential for finding important two-factor interactions and possibly curvature in the underlying surface. This assessment was that the proposed size of design was potentially a bit too ambitious for the experiment’s goals, so we explored three other competing designs that had slightly larger sizes but were able tomore » improve several aspects of the design.« less

Track train dynamics analysis and test program: Methodology development for the derailment safety analysis of six-axle locomotives

NASA Technical Reports Server (NTRS)

Marcotte, P. P.; Mathewson, K. J. R.

1982-01-01

The operational safety of six axle locomotives is analyzed. A locomotive model with corresponding data on suspension characteristics, a method of track defect characterization, and a method of characterizing operational safety are used. A user oriented software package was developed as part of the methodology and was used to study the effect (on operational safety) of various locomotive parameters and operational conditions such as speed, tractive effort, and track curvature. The operational safety of three different locomotive designs was investigated.

Temporal femtosecond pulse shaping dependence of laser-induced periodic surface structures in fused silica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shi, Xuesong; Jiang, Lan; Li, Xin, E-mail: lixin02@bit.edu.cn

2014-07-21

The dependence of periodic structures and ablated areas on temporal pulse shaping is studied upon irradiation of fused silica by femtosecond laser triple-pulse trains. Three types of periodic structures can be obtained by using pulse trains with designed pulse delays, in which the three-dimensional nanopillar arrays with ∼100–150 nm diameters and ∼200 nm heights are first fabricated in one step. These nanopillars arise from the break of the ridges of ripples in the upper portion, which is caused by the split of orthogonal ripples in the bottom part. The localized transient electron dynamics and corresponding material properties are considered for the morphologicalmore » observations.« less

Piezoresistive position microsensors with ppm-accuracy

NASA Astrophysics Data System (ADS)

Stavrov, Vladimir; Shulev, Assen; Stavreva, Galina; Todorov, Vencislav

2015-05-01

In this article, the relation between position accuracy and the number of simultaneously measured values, such as coordinates, has been analyzed. Based on this, a conceptual layout of MEMS devices (microsensors) for multidimensional position monitoring comprising a single anchored and a single actuated part has been developed. Both parts are connected with a plurality of micromechanical flexures, and each flexure includes position detecting cantilevers. Microsensors having detecting cantilevers oriented in X and Y direction have been designed and prototyped. Experimentally measured results at characterization of 1D, 2D and 3D position microsensors are reported as well. Exploiting different flexure layouts, a travel range between 50μm and 1.8mm and sensors' sensitivity in the range between 30μV/μm and 5mV/μm@ 1V DC supply voltage have been demonstrated. A method for accurate calculation of all three Cartesian coordinates, based on measurement of at least three microsensors' signals has also been described. The analyses of experimental results prove the capability of position monitoring with ppm-(part per million) accuracy. The technology for fabrication of MEMS devices with sidewall embedded piezoresistors removes restrictions in strong improvement of their usability for position sensing with a high accuracy. The present study is, also a part of a common strategy for developing a novel MEMS-based platform for simultaneous accurate measurement of various physical values when they are transduced to a change of position.

Vehicle parts detection based on Faster - RCNN with location constraints of vehicle parts feature point

NASA Astrophysics Data System (ADS)

Yang, Liqin; Sang, Nong; Gao, Changxin

2018-03-01

Vehicle parts detection plays an important role in public transportation safety and mobility. The detection of vehicle parts is to detect the position of each vehicle part. We propose a new approach by combining Faster RCNN and three level cascaded convolutional neural network (DCNN). The output of Faster RCNN is a series of bounding boxes with coordinate information, from which we can locate vehicle parts. DCNN can precisely predict feature point position, which is the center of vehicle part. We design an output strategy by combining these two results. There are two advantages for this. The quality of the bounding boxes are greatly improved, which means vehicle parts feature point position can be located more precise. Meanwhile we preserve the position relationship between vehicle parts and effectively improve the validity and reliability of the result. By using our algorithm, the performance of the vehicle parts detection improve obviously compared with Faster RCNN.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 2-Domino Hazard Index and case study.

PubMed

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design.

Historical Epidemics Cartography Generated by Spatial Analysis: Mapping the Heterogeneity of Three Medieval "Plagues" in Dijon

PubMed Central

Galanaud, Pierre; Galanaud, Anne; Giraudoux, Patrick

2015-01-01

Objectives This work was designed to adapt Geographical Information System-based spatial analysis to the study of historical epidemics. We mapped "plague" deaths during three epidemics of the early 15th century, analyzed spatial distributions by applying the Kulldorff's method, and determined their relationships with the distribution of socio-professional categories in the city of Dijon. Materials and Methods Our study was based on a database including 50 annual tax registers (established from 1376 to 1447) indicating deaths and survivors among the heads of households, their home location, tax level and profession. The households of the deceased and survivors during 6 years with excess mortality were individually located on a georeferenced medieval map, established by taking advantage of the preserved geography of the historical center of Dijon. We searched for clusters of heads of households characterized by shared tax levels (high-tax payers, the upper decile; low-tax payers, the half charged at the minimum level) or professional activities and for clusters of differential mortality. Results High-tax payers were preferentially in the northern intramural part, as well as most wealthy or specialized professionals, whereas low-tax payers were preferentially in the southern part. During two epidemics, in 1400–1401 and 1428, areas of higher mortality were found in the northern part whereas areas of lower mortality were in the southern one. A high concentration of housing and the proximity to food stocks were common features of the most affected areas, creating suitable conditions for rats to pullulate. A third epidemic, lasting from 1438 to 1440 had a different and evolving geography: cases were initially concentrated around the southern gate, at the confluence of three rivers, they were then diffuse, and ended with residual foci of deaths in the northern suburb. Conclusion Using a selected historical source, we designed an approach allowing spatial analysis of urban medieval epidemics. Our results fit with the view that the 1400–1401 epidemic was a Black Death recurrence. They suggest that this was also the case in 1428, whereas in 1438–1440 a different, possibly waterborne, disease was involved. PMID:26625117

Design of smart home terminal controller based on ZigBee

NASA Astrophysics Data System (ADS)

Li, Biqing; Li, Zhao; Zhang, Hongyan

2018-04-01

With the development in scienc and technology, and the improvement of living conditions, people pay more and more attention to the comfort of household life. Therefore, smart home has become the development trend of the future furniture. This design is composed of three blocks: transmitting module, receiving module and data acquisition module. ZigBee and STC89C52 belong to launch module as well as belong to receive module. Launch module contains ZigBee, serial communication module and monolithic STC89C52. The receiving module contains light control parts, curtain control part, ZigBee and microcontroller STC89C52. Data acquisition module includes temperature and humidity detection.

Exploring Middle School Students' Understanding of Three Conceptual Models in Genetics

NASA Astrophysics Data System (ADS)

Bresler Freidenreich, Hava; Golan Duncan, Ravit; Shea, Nicole

2011-11-01

Genetics is the cornerstone of modern biology and a critical aspect of scientific literacy. Research has shown, however, that many high school graduates lack fundamental understandings in genetics necessary to make informed decisions about issues and emerging technologies in this domain, such as genetic screening, genetically modified foods, etc. Genetic literacy entails understanding three interrelated models: a genetic model that describes patterns of genetic inheritance, a meiotic model that describes the process by which genes are segregated into sex cells, and a molecular model that describes the mechanisms that link genotypes to phenotypes within an individual. Currently, much of genetics instruction, especially in terms of the molecular model, occurs at the high school level, and we know little about the ways in which middle school students can reason about these models. Furthermore, we do not know the extent to which carefully designed instruction can help younger students develop coherent and interrelated understandings in genetics. In this paper, we discuss a research study aimed at elucidating middle school students' abilities to reason about the three genetic models. As part of our research, we designed an eight-week inquiry unit that was implemented in a combined sixth- to eighth-grade science classroom. We describe our instructional design and report results based on an analysis of written assessments, clinical interviews, and artifacts of the unit. Our findings suggest that middle school students are able to successfully reason about all three genetic models.

Curriculum Guide for Day Care Primary.

ERIC Educational Resources Information Center

Radke, Mary Ann

This curriculum, designed for severely retarded children in a primary day care setting, is divided into three sections: (1) Awareness of Body Parts, (2) Gross Motor Skills, and (3) Language Arts. Detailed activities are suggested to develop and reinforce various gross motor coordinations and learning skills. (CS)

Lighting Up Science for the Visually Impaired.

ERIC Educational Resources Information Center

Billings, Gilbert W.; And Others

1980-01-01

Described are activities designed specifically for visually impaired students, demonstrating (1) meiosis, (2) mass, (3) enzyme-substrate reactions, (4) function and relationships of flowering parts. Employed are tactile and auditory learning aids, such as the tape recorder, electric eye, Braille typewriter, textured fabrics, and three-dimensional…

Art, Illusion and the Visual System.

ERIC Educational Resources Information Center

Livingstone, Margaret S.

1988-01-01

Describes the three part system of human vision. Explores the anatomical arrangement of the vision system from the eyes to the brain. Traces the path of various visual signals to their interpretations by the brain. Discusses human visual perception and its implications in art and design. (CW)

MCPS Curriculum Development Planning Process.

ERIC Educational Resources Information Center

Montgomery County Public Schools, Rockville, MD. Dept. of Instructional Planning and Development.

The procedure documented is used for the systemwide planning of curriculum development in Montgomery County, Maryland, and consists of three parts: a planning and review process; an instructional design and development model; and a proposed calendar for cyclical review of programs. Specific position responsibilities, organizational charts, and…

Dietary Interviewing by Computer.

ERIC Educational Resources Information Center

Slack, Warner V.; And Others

1976-01-01

A computer based dietary interviewing program enhanced self awareness for overweight participants. In a three part interview designed for direct interaction between patient and computer, questions dealt with general dietary behavior and details of food intake. The computer assisted the patient in planning a weight reducing diet of approximately…

Three new tetranorditerpenes from aerial parts of acerola cherry (Malpighia emarginata).

PubMed

Liu, Jie-Qing; Deng, Yuan-Yuan; Li, Ting-Zhao; Han, Qiang; Li, Yan; Qiu, Ming-Hua

2014-02-24

Acerola cherry is a world famous fruit which contains abundant antioxidants such as vitamin C, anthocyanins, flavonoids, and phenolics. However, studies concerning bioactivity components from aerial parts of acerola (Malpighia emarginata) are scarce. In view of this, we have examined the constituents of aerial parts of acerola, and three new tetranorditerpenes acerolanins A-C (1-3) with a rare 2H-benz[e]inden-2-one substructure were isolated. Their structures were determined on the basis of spectral studies and acerolanin C was confirmed by X-ray crystallographic analysis. Furthermore, three new compounds have been studied for their cytotoxic activity.

Analysis and topology optimization design of high-speed driving spindle

NASA Astrophysics Data System (ADS)

Wang, Zhilin; Yang, Hai

2018-04-01

The three-dimensional model of high-speed driving spindle is established by using SOLIDWORKS. The model is imported through the interface of ABAQUS, A finite element analysis model of high-speed driving spindle was established by using spring element to simulate bearing boundary condition. High-speed driving spindle for the static analysis, the spindle of the stress, strain and displacement nephogram, and on the basis of the results of the analysis on spindle for topology optimization, completed the lightweight design of high-speed driving spindle. The design scheme provides guidance for the design of axial parts of similar structures.

Chile rural electrification cooperation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flowers, L.

1997-12-01

The author describes a joint program to use renewables for rural electrification projects in Chile. The initial focus was in a limited part of the country, involving wind mapping, pilot project planning, training, and development of methodologies for comparative evaluations of resources. To this point three wind hybrid systems have been installed in one region, as a part of the regional private utility, and three additional projects are being designed. Additional resource assessment and training is ongoing. The author points out the difficulties in working with utilities, the importance of signed documentation, and the need to look at these programsmore » as long term because of the time involved in introducing such new technologies.« less

KSC-07pd2868

NASA Image and Video Library

2007-10-01

KENNEDY SPACE CENTER, FLA. -- In the Space Station Processing Facility at NASA's Kennedy Space Center, the starboard arm of the Special Purpose Dexterous Manipulator, known as Dextre, is lowered toward the base for installation. Dextre is a sophisticated dual-armed robot, which is part of Canada's contribution to the International Space Station (ISS). Along with Canadarm2, whose technical name is the Space Station Remote Manipulator System, and a moveable work platform called the Mobile Base System, these three elements form a robotic system called the Mobile Servicing System, or MSS. The three components have been designed to work together or independently. Dextre is part of the payload scheduled on mission STS-123, targeted to launch Feb. 14. Photo credit: NASA/George Shelton

42 CFR 405.212 - Medicare Coverage IDE study criteria.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Medicare coverage of items and services described in § 405.211, a Category A (Experimental) or Category B...) The study design is methodologically appropriate and the anticipated number of enrolled subjects is... CFR parts 50, 56, and 812 and 45 CFR part 46. (7) Where appropriate, the study is not designed to...

Development of adaptive bust for female soft body armour using three dimensional (3D) warp interlock fabrics: Three dimensional (3D) design process

NASA Astrophysics Data System (ADS)

Abtew, M. A.; Bruniaux, P.; Boussu, F.

2017-10-01

The traditional two dimensional (2D) pattern making method for developing female body armour has a negative effect on the ballistic protective performance as well as the comfort of the wearer. This is due to, unlike the male body armour, the female body armour manufacturing involves different darts to accommodate the natural curvature of the female body, i.e. bust area, which will reveals the weak parts at the seam and stitch area while ballistic impact. Moreover, the proper bra size also plays an important role not only in bra design but also in the design of a women’s ballistic vest. The present research study tried to propose the novel 3D designing approach for developing different volumes of breast using feature points (both bust surface and outline points) in the specific 3D adaptive mannequin. Later the flattened 3D bra patterns of this method has been also compare with the 2D standard pattern making in order to modify and match with 2D traditional method. The result indicated that the proposed method which conceives the 3D patterns on the 3D bust is easier to implement and can generate patterns with satisfactory fit and comfort as compared to 2D patterns.

Usage of Parameterized Fatigue Spectra and Physics-Based Systems Engineering Models for Wind Turbine Component Sizing: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parsons, Taylor; Guo, Yi; Veers, Paul

Software models that use design-level input variables and physics-based engineering analysis for estimating the mass and geometrical properties of components in large-scale machinery can be very useful for analyzing design trade-offs in complex systems. This study uses DriveSE, an OpenMDAO-based drivetrain model that uses stress and deflection criteria to size drivetrain components within a geared, upwind wind turbine. Because a full lifetime fatigue load spectrum can only be defined using computationally-expensive simulations in programs such as FAST, a parameterized fatigue loads spectrum that depends on wind conditions, rotor diameter, and turbine design life has been implemented. The parameterized fatigue spectrummore » is only used in this paper to demonstrate the proposed fatigue analysis approach. This paper details a three-part investigation of the parameterized approach and a comparison of the DriveSE model with and without fatigue analysis on the main shaft system. It compares loads from three turbines of varying size and determines if and when fatigue governs drivetrain sizing compared to extreme load-driven design. It also investigates the model's sensitivity to shaft material parameters. The intent of this paper is to demonstrate how fatigue considerations in addition to extreme loads can be brought into a system engineering optimization.« less

Hard metal exposures. Part 1: Observed performance of three local exhaust ventilation systems.

PubMed

Guffey, S E; Simcox, N; Booth, D W; Hibbard, R; Stebbins, A

2000-04-01

Not every ventilation system performs as intended; much can be learned when they do not. The purpose of this study was to compare observed initial performance to expected levels for three saw-reconditioning shop ventilation systems and to characterize the changes in performance of the systems over a one-year period. These three local exhaust ventilation systems were intended to control worker exposures to cobalt, cadmium, and chromium during wet grinding, dry grinding, and welding/brazing activities. Prior to installation the authors provided some design guidance based on Industrial Ventilation, a Manual of Recommended Practice. However, the authors had limited influence on the actual installation and operation and no line authority for the systems. In apparent efforts to cut costs and to respond to other perceived needs, the installed systems deviated from the specifications used in pressure calculations in many important aspects, including adding branch ducts, use of flexible ducts, the choice of fans, and the construction of some hoods. After installation of the three systems, ventilation measurements were taken to determine if the systems met design specifications, and worker exposures were measured to determine effectiveness. The results of the latter will be published as a companion article. The deviations from design and maintenance failures may have adversely affected performance. From the beginning to the end of the study period the distribution of air flow never matched the design specifications for the systems. The observed air flows measured within the first month of installation did not match the predicated design air flows for any of the systems, probably because of the differences between the design and the installed system. Over the first year of operation, hood air flow variability was high due to inadequate cleaning of the sticky process materials which rapidly accumulated in the branch ducts. Poor distribution of air flows among branch ducts frequently produced individual hood air flows that were far below specified design levels even when the total air flow through that system was more than adequate. To experienced practitioners, it is not surprising that deviations from design recommendations and poor maintenance would be associated with poor system performance. Although commonplace, such experiences have not been documented in peer-reviewed publications to date. This publication is a first step in providing that documentation.

Systems engineering: A formal approach. Part 1: System concepts

NASA Astrophysics Data System (ADS)

Vanhee, K. M.

1993-03-01

Engineering is the scientific discipline focused on the creation of new artifacts that are supposed to be of some use to our society. Different types of artifacts require different engineering approaches. However, in all these disciplines the development of a new artifact is divided into stages. Three stages can always be recognized: Analysis, Design, and Realization. The book considers only the first two stages of the development process. It focuses on a specific type of artifacts, called discrete dynamic systems. These systems consist of active components of actors that consume and produce passive components or tokens. Three subtypes are studied in more detail: business systems (like a factory or restaurant), information systems (whether automated or not), and automated systems (systems that are controlled by an automated information system). The first subtype is studied by industrial engineers, the last by software engineers and electrical engineers, whereas the second is a battlefield for all three disciplines. The union of these disciplines is called systems engineering.

Morphological Characteristics and Habitats of Red Seaweed Gracilaria spp. (Gracilariaceae, Rhodophyta) in Santubong and Asajaya, Sarawak, Malaysia

PubMed Central

Othman, Muhammad Nur Arif; Hassan, Ruhana; Harith, Mohd Nasarudin; Sah, Amir Shah Ruddin Md

2018-01-01

Red seaweed Gracilaria, one of the largest genus in Division Rhodophyta inhabits Sarawak coastal water. This study was designed to identify the species of Gracilaria using morphological approach and to assess selected water quality parameters in Gracilaria habitats. Three field samplings were carried out in Santubong and Asajaya, Sarawak from November 2013 to December 2014. Overall, three species were identified namely Gracilaria changii, G. blodgettii and G. coronopifolia, attached to net of cage culture in Santubong and root of mangrove trees in Asajaya. In addition, three different taxa of aquatic macroinvertebrates (polychaete, small crab, bivalve) and single species of red seaweed (Acanthophora sp.) were observed in Gracilaria assemblages. An estimate of 37% to 40% of the upper part of the cage net in Santubong was covered by seaweeds and only 16% to 20% in Asajaya’s mangrove. The study had provided better information on identification of Gracilaria and their habitat in Sarawak. Future work involving DNA barcoding of each species is in progress. PMID:29644017

Morphological Characteristics and Habitats of Red Seaweed Gracilaria spp. (Gracilariaceae, Rhodophyta) in Santubong and Asajaya, Sarawak, Malaysia.

PubMed

Othman, Muhammad Nur Arif; Hassan, Ruhana; Harith, Mohd Nasarudin; Sah, Amir Shah Ruddin Md

2018-03-01

Red seaweed Gracilaria , one of the largest genus in Division Rhodophyta inhabits Sarawak coastal water. This study was designed to identify the species of Gracilaria using morphological approach and to assess selected water quality parameters in Gracilaria habitats. Three field samplings were carried out in Santubong and Asajaya, Sarawak from November 2013 to December 2014. Overall, three species were identified namely Gracilaria changii , G. blodgettii and G. coronopifolia , attached to net of cage culture in Santubong and root of mangrove trees in Asajaya. In addition, three different taxa of aquatic macroinvertebrates (polychaete, small crab, bivalve) and single species of red seaweed ( Acanthophora sp.) were observed in Gracilaria assemblages. An estimate of 37% to 40% of the upper part of the cage net in Santubong was covered by seaweeds and only 16% to 20% in Asajaya's mangrove. The study had provided better information on identification of Gracilaria and their habitat in Sarawak. Future work involving DNA barcoding of each species is in progress.

Separating the signal from the noise: Expanding flow cytometry into the sub-micron range.

EPA Science Inventory

Cytometry Part A Special Section: Separating the signal from the noise: Expanding flow cytometry into the sub-micron range. The current Cytometry Part A Special Section presents three studies that utilize cytometers to study sub-micron particles. The three studies involve the 1...

Operator Station Design System - A computer aided design approach to work station layout

NASA Technical Reports Server (NTRS)

Lewis, J. L.

1979-01-01

The Operator Station Design System is resident in NASA's Johnson Space Center Spacecraft Design Division Performance Laboratory. It includes stand-alone minicomputer hardware and Panel Layout Automated Interactive Design and Crew Station Assessment of Reach software. The data base consists of the Shuttle Transportation System Orbiter Crew Compartment (in part), the Orbiter payload bay and remote manipulator (in part), and various anthropometric populations. The system is utilized to provide panel layouts, assess reach and vision, determine interference and fit problems early in the design phase, study design applications as a function of anthropometric and mission requirements, and to accomplish conceptual design to support advanced study efforts.

Study of Using Excess Stock to Reduce Naval Aviation Depot-Level Repairable Piece Part Backorders

DTIC Science & Technology

2016-12-01

Designator Code, may get involved to ensure timely receipt. When a high-priority (Issue Priority Group 1) requisition is backordered, a CAS...alternative source for acquiring bit-piece parts is Navy excess material. Excess material is inventory designated by Navy organizations as meeting...potential alternative source for acquiring bit-piece parts is Navy excess material. Excess material is inventory designated by Navy organizations as

Engineering Design Handbook: Environmental Series. Part Three. Induced Environmental Factors

DTIC Science & Technology

1976-01-20

beams are combined on a photo- detector, a beat frequency at 25 MHz is produced. Periodic motion of the reflecting surface then modulates sidebands...about the 25-MHz beat frequency. The ampli- tude and frequency of the vibration are determined by demodulation of the phase-modulated 25-MHz signal...VibrationBulletin, No. 41, Part 6 (December 1970), pp. 29-34. 70. E. G Fischer, "Sine Beat Vibration Testing Related to Earthquake Response Spectra

Parts application handbook study

NASA Technical Reports Server (NTRS)

1978-01-01

The requirements for a NASA application handbook for standard electronic parts are determined and defined. This study concentrated on identifying in detail the type of information that designers and parts engineers need and expect in a parts application handbook for the effective application of standard parts on NASA projects.

Advanced manufacturing development of a composite empennage component for L-1011 aircraft

NASA Technical Reports Server (NTRS)

Alva, T.; Henkel, J.; Johnson, R.; Carll, B.; Jackson, A.; Mosesian, B.; Brozovic, R.; Obrien, R.; Eudaily, R.

1982-01-01

This is the final report of technical work conducted during the fourth phase of a multiphase program having the objective of the design, development and flight evaluation of an advanced composite empennage component manufactured in a production environment at a cost competitive with those of its metal counterpart, and at a weight savings of at least 20 percent. The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes front and rear spars. During Phase 4 of the program, production quality tooling was designed and manufactured to produce three sets of covers, ribs, spars, miscellaneous parts, and subassemblies to assemble three complete ACVF units. Recurring and nonrecurring cost data were compiled and documented in the updated producibility/design to cost plan. Nondestruct inspections, quality control tests, and quality acceptance tests were performed in accordance with the quality assurance plan and the structural integrity control plan. Records were maintained to provide traceability of material and parts throughout the manufacturing development phase. It was also determined that additional tooling would not be required to support the current and projected L-1011 production rate.

NASA-USRP Summer 2013 Internship Final Report

NASA Technical Reports Server (NTRS)

Gurganus, S. Christine

2013-01-01

Three major projects were undertaken during the Summer 2013 USRP Internship: (A) assisting the cTAPS group with component and pressure vessel system analyses and documentation, (B) designing a hoisting fixture for a solid rocket motor, (C) finding an alternative to removing the DOT rated gaseous nitrogen tank from the roof for hydrostatic testing. Hypergolic Material Assessments (HMAs) and pressure calculations were performed on components of pressure systems. Additionally, component information was logged in the Standard Parts Database to provide a location where system designers can find information regarding components, including their specifications and compatibility with fluids. A hoisting fixture was designed to hoist a solid rocket motor and meets the specifications related to stress and size. However, there are issues with the fixtures bolt head allotment, the bolt spacing, and the complexity of the part. Finally, calculations were performed on an expiring DOT rated gaseous nitrogen tank in an attempt to re-rate it per ASME standards. This was unsuccessful so other options are being explored for the tank. While much progress was made on all three projects, there is still work to be performed on each project to achieve the desired results.

Interrelation Between Safety Factors and Reliability

NASA Technical Reports Server (NTRS)

Elishakoff, Isaac; Chamis, Christos C. (Technical Monitor)

2001-01-01

An evaluation was performed to establish relationships between safety factors and reliability relationships. Results obtained show that the use of the safety factor is not contradictory to the employment of the probabilistic methods. In many cases the safety factors can be directly expressed by the required reliability levels. However, there is a major difference that must be emphasized: whereas the safety factors are allocated in an ad hoc manner, the probabilistic approach offers a unified mathematical framework. The establishment of the interrelation between the concepts opens an avenue to specify safety factors based on reliability. In cases where there are several forms of failure, then the allocation of safety factors should he based on having the same reliability associated with each failure mode. This immediately suggests that by the probabilistic methods the existing over-design or under-design can be eliminated. The report includes three parts: Part 1-Random Actual Stress and Deterministic Yield Stress; Part 2-Deterministic Actual Stress and Random Yield Stress; Part 3-Both Actual Stress and Yield Stress Are Random.

Molecular design of anticancer drug leads based on three-dimensional quantitative structure-activity relationship.

PubMed

Huang, Xiao Yan; Shan, Zhi Jie; Zhai, Hong Lin; Li, Li Na; Zhang, Xiao Yun

2011-08-22

Heat shock protein 90 (Hsp90) takes part in the developments of several cancers. Novobiocin, a typically C-terminal inhibitor for Hsp90, will probably used as an important anticancer drug in the future. In this work, we explored the valuable information and designed new novobiocin derivatives based on a three-dimensional quantitative structure-activity relationship (3D QSAR). The comparative molecular field analysis and comparative molecular similarity indices analysis models with high predictive capability were established, and their reliabilities are supported by the statistical parameters. Based on the several important influence factors obtained from these models, six new novobiocin derivatives with higher inhibitory activities were designed and confirmed by the molecular simulation with our models, which provide the potential anticancer drug leads for further research.

Strategy Revealing Phenotypic Differences among Synthetic Oscillator Designs

PubMed Central

2015-01-01

Considerable progress has been made in identifying and characterizing the component parts of genetic oscillators, which play central roles in all organisms. Nonlinear interaction among components is sufficiently complex that mathematical models are required to elucidate their elusive integrated behavior. Although natural and synthetic oscillators exhibit common architectures, there are numerous differences that are poorly understood. Utilizing synthetic biology to uncover basic principles of simpler circuits is a way to advance understanding of natural circadian clocks and rhythms. Following this strategy, we address the following questions: What are the implications of different architectures and molecular modes of transcriptional control for the phenotypic repertoire of genetic oscillators? Are there designs that are more realizable or robust? We compare synthetic oscillators involving one of three architectures and various combinations of the two modes of transcriptional control using a methodology that provides three innovations: a rigorous definition of phenotype, a procedure for deconstructing complex systems into qualitatively distinct phenotypes, and a graphical representation for illuminating the relationship between genotype, environment, and the qualitatively distinct phenotypes of a system. These methods provide a global perspective on the behavioral repertoire, facilitate comparisons of alternatives, and assist the rational design of synthetic gene circuitry. In particular, the results of their application here reveal distinctive phenotypes for several designs that have been studied experimentally as well as a best design among the alternatives that has yet to be constructed and tested. PMID:25019938

Chemistry of Living Matter, Energy Capture & Growth, Parts Three & Four of an Integrated Science Sequence, Teacher's Guide, 1973 Edition.

ERIC Educational Resources Information Center

Portland Project Committee, OR.

This teacher's guide includes parts three and four of the four-part third year Portland Project, a three-year integrated secondary science curriculum sequence. The underlying intention of the third year is to study energy and its importance to life. Energy-related concepts considered in year one and two, and the concepts related to atomic…

"Do I really want to do this?" Longitudinal cohort study participants' perspectives on postal survey design: a qualitative study

PubMed Central

2011-01-01

Background Randomised controlled trials have investigated aspects of postal survey design yet cannot elaborate on reasons behind participants' decision making and survey behaviour. This paper reports participants' perspectives of the design of, and participation in, a longitudinal postal cohort survey. It describes strengths and weaknesses in study design from the perspectives of study participants and aims to contribute to the: 1) design of future cohort surveys and questionnaires generally and, 2) design of cohort surveys for people with musculoskeletal disorders (MSDs) specifically. Methods In-depth interviews explored the design of postal surveys previously completed by participants. Interviews used open ended questioning with a topic guide for prompts if areas of interest were not covered spontaneously. Thematic data analysis was undertaken based on the framework method. A second researcher verified all coding. Results Data from fourteen interviews were analysed within three main themes; participation, survey design and survey content. One of the main findings was the importance of clear communication aimed at the correct audience both when inviting potential participants to take part and within the survey itself. Providing enough information about the study, having a topic of interest and an explanation of likely benefits of the study were important when inviting people to participate. The neutrality of the survey and origination from a reputable source were both important; as was an explanation about why information was being collected within the survey itself. Study findings included participants' impressions when invited to take part, why they participated, the acceptability of follow-up of non-responders and why participants completed the follow-up postal survey. Also discussed were participants' first impression of the survey, its length, presentation and participants' views about specific questions within the survey. Conclusions Ideas generated in this study provide an insight into participants' decision making and survey behaviour and may enhance the acceptability of future surveys to potential participants. As well as clear communication, participants valued incentives and survey questions that were relevant to them. However, opinions varied as to the preferred format for responses with some advising more opportunity for open-ended feedback. We also found that some standard format questions can raise quandaries for individual participants. PMID:21269515

Estimation of sample size and testing power (Part 3).

PubMed

Hu, Liang-ping; Bao, Xiao-lei; Guan, Xue; Zhou, Shi-guo

2011-12-01

This article introduces the definition and sample size estimation of three special tests (namely, non-inferiority test, equivalence test and superiority test) for qualitative data with the design of one factor with two levels having a binary response variable. Non-inferiority test refers to the research design of which the objective is to verify that the efficacy of the experimental drug is not clinically inferior to that of the positive control drug. Equivalence test refers to the research design of which the objective is to verify that the experimental drug and the control drug have clinically equivalent efficacy. Superiority test refers to the research design of which the objective is to verify that the efficacy of the experimental drug is clinically superior to that of the control drug. By specific examples, this article introduces formulas of sample size estimation for the three special tests, and their SAS realization in detail.

Co-designing the next generation of home energy management systems with lead-users.

PubMed

Peacock, Andrew D; Chaney, Joel; Goldbach, Kristin; Walker, Guy; Tuohy, Paul; Santonja, Salvador; Todoli, David; Owens, Edward H

2017-04-01

Home energy management systems are widely promoted as essential components of future low carbon economies. It is argued in this paper that assumptions surrounding their deployment, and the methods used to design them, emerge from discredited models of people and energy. This offers an explanation for why their field trial performance is so inconsistent. A first of a kind field trial is reported. Three eco communities took part in a comprehensive participatory design exercise as lead users. The challenge was to help users synchronise their energy use behaviours with the availability of locally generated renewable energy sources. To meet this aim, a set of highly novel Home Energy Management interfaces were co-designed and tested. Not only were the designs radically different to the norm, but they also yielded sustained user engagement over a six-month follow-up period. It is argued that user-centred design holds the key to unlocking the energy saving potential of new domestic technologies, and this study represents a bold step in that direction. Copyright © 2016 Elsevier Ltd. All rights reserved.

Analysis of static and dynamic characteristic of spindle system and its structure optimization in camshaft grinding machine

NASA Astrophysics Data System (ADS)

Feng, Jianjun; Li, Chengzhe; Wu, Zhi

2017-08-01

As an important part of the valve opening and closing controller in engine, camshaft has high machining accuracy requirement in designing. Taking the high-speed camshaft grinder spindle system as the research object and the spindle system performance as the optimizing target, this paper firstly uses Solidworks to establish the three-dimensional finite element model (FEM) of spindle system, then conducts static analysis and the modal analysis by applying the established FEM in ANSYS Workbench, and finally uses the design optimization function of the ANSYS Workbench to optimize the structure parameter in the spindle system. The study results prove that the design of the spindle system fully meets the production requirements, and the performance of the optimized spindle system is promoted. Besides, this paper provides an analysis and optimization method for other grinder spindle systems.

Finite Element Analysis for the Web Offset of Wind Turbine Blade

NASA Astrophysics Data System (ADS)

Zhou, Bo; Wang, Xin; Zheng, Changwei; Cao, Jinxiang; Zou, Pingguo

2017-05-01

The web is an important part of wind turbine blade, which improves bending properties. Much of blade process is handmade, so web offset of wind turbine blade is one of common quality defects. In this paper, a 3D parametric finite element model of a blade for 2MW turbine was established by ANSYS. Stress distributions in different web offset values were studied. There were three kinds of web offset. The systematic study of web offset was done by orthogonal experiment. The most important factor of stress distributions was found. The analysis results have certain instructive significance to design and manufacture of wind turbine blade.

A software development and evolution model based on decision-making

NASA Technical Reports Server (NTRS)

Wild, J. Christian; Dong, Jinghuan; Maly, Kurt

1991-01-01

Design is a complex activity whose purpose is to construct an artifact which satisfies a set of constraints and requirements. However the design process is not well understood. The software design and evolution process is the focus of interest, and a three dimensional software development space organized around a decision-making paradigm is presented. An initial instantiation of this model called 3DPM(sub p) which was partly implemented, is presented. Discussion of the use of this model in software reuse and process management is given.

A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hannan, M.A., E-mail: hannan@eng.ukm.my; Abdulla Al Mamun, Md., E-mail: md.abdulla@siswa.ukm.edu.my; Hussain, Aini, E-mail: aini@eng.ukm.my

Highlights: • Classification of available technologies for SWM system in four core category. • Organization of technology based SWM systems in three main groups. • Summary of SWM systems with target application, methodology and functional domain. • Issues and challenges are highlighted for further design of a sustainable system. - Abstract: In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challengesmore » towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system.« less

Physics at the Frontier HS Teacher Workshop: bringing particle physics and cloud chambers into the classroom

NASA Astrophysics Data System (ADS)

Gleason, Alyx; Bedard, Jamie; Bellis, Matthew; CMS Collaboration

2016-03-01

In the summer of 2015, we hosted 10 high school teachers for a three-day ``Physics at the Frontier'' Workshop. The mornings were spent learning about particle physics, CMS and the LHC, and radiation safety while the afternoons were spent building turn-key cloud chambers for use in their classrooms. The basic cloud chamber design uses Peltier thermoelectric coolers, rather than dry ice, and instructions can be found in multiple places online. For a robust build procedure and for easy use in the classroom, we redesigned parts of the construction process to make it easier to put together while holding costs below 200 per chamber. In addition to this new design, we also created a website with instructions for those who are interested in building their own using this design. This workshop was funded in part by a minigrant for Outreach and Education from the USCMS collaboration. Our experience with the workshop and the lessons learned from the cloud chamber design will be discussed. This work was funded in part by NSF Grants PHY-1307562 and a USCMS-administered minigrant for Outreach and Education.

Development of professional knowledge in action: experiences from an action science design focusing on acknowledging communication in mental health.

PubMed

Vatne, Solfrid; Bjornerem, Heidi; Hoem, Elisabeth

2009-03-01

This article reports a multi-professional development project that was based on an action science design. The purpose was to develop 'acknowledging communication' in a psychiatric department for young people, and the objective to study the staffs' experiences of participating in the project. The professional part of the project has its foundation in Schibbye's treatment theory of inter-subjective understanding of relationships, and involves three main approaches from her theory: self-reflection, self-delimitation and emotional presence. The article presents the specific action design used, where reflection processes were developed in three different arenas: multidisciplinary Reflection groups, a Leader support group for the group leaders of the Reflection groups and collective Project seminars for all employees. A formal study programme designed to increase professional expertise, 15 European Credit Transfer System (ECTS), was also offered. The research methods included the researcher's process notes taken during the process, field notes from participating in the Leader support group, and qualitative interviews of eight informants participating in the various reflection arenas. The article presents and discusses the experiences evolved from the methods that were developed during the professional action science project: reflection on specific situations of interaction with patients in the form of oral/written narratives and the development of video presentations in combination with 'reflective teams'. The study showed that to facilitate change in the role of staff members, it is important to combine several reflection arenas where theoretical principles can be converted into practical action. By drawing data from only one study site, the study has a limited transferability, but should be of interest for professionals working with clinical change processes.

[An investigation of the application of hygienic standards for the design of industrial enterprises (GBZ 1-2010)].

PubMed

Lu, Y; Zhang, M

2016-08-20

Objective: To study the applicability, the high frequency used content, the feasibility, and issues needed to be solved of the standard of GBZ 1-2010, aiming to provide technical evidence for the revision of GBZ1. Methods: In the study, the data were collected by referring to the literature database and the questionnaire from June 2013 to June 2015. There were 2 surveys carried out in the study, with methods including questionnaire survey and specific interview. The investigation methods include the paper version of the questionnaire by mail, the electronic version of the questionnaire by e-mail, and the online survey. And 111 questionnaires were collected. Results: In total, the applicability survey (the first survey) received 156 suggestions covering 76 items from 23 facilities, and 13 key technical issues were summarized to be solved as priorities. In the application survey (the second survey) , the leading three jobs using GBZ 1-2010 were the occupational hazards evaluation for constructive project (82.0%) , lecturing/training (65.8%) , occupational hazards monitoring (64.9%) , respectively. The high frequency used contents of GBZ 1-2010 were the sixth part "the basic hygienic requirements for workplace" (90.1%) , the fifth part "site selection, overall layout and workshop design" (87.4%) , the seventh part "the basic hygienic requirements for welfare room" (85.6%) , respectively. In the results of feasibility, scores of the fourth part "the general rules" , the fifth part "site selection, overall layout and workshop design" , the sixth part "the basic hygienic requirements for workplace" , the seventh part "the basic hygienic requirements for welfare room" , the eighth "emergency rescue" , annex A "the correct use instructions" , annex B "buffer zone standards for industrial enterprises" were 2.6, 3.1, 3.5, 3.8, 3.2, 3.3, 2.6, respectively. Among 111 questionnaires, the parts needed to be modified as priories were the fifth part "site selection, overall layout and workshop design" (51.4%) , and the sixth part "the basic hygienic requirements for workplace" (51.4%) . In results of the key technical issues needed to be modified of GBZ 1-2010, the contents needed to be added as priories were the occupational prevention and control requirements of biological factors (51.4%) , technical parameters of dust in workplace (48.7%) , technical parameters of hazardous agents in workplace (46.9%) , the quality and quantity requirements of fresh air (46.0%) , the setting conditions of the emergency rescue station (46.0%) , the hygienic design requirements of joint workshops and the evidence (45.1%) , and requirements for medical emergency rescue personnel equipped and qualified (45.1%) . Conclusion: GBZ 1-2010 is feasible and practical, mainly used by occupational health technical service organizations in the occupational hazards evaluation for constructive project, lecturing/training, occupational hazards monitoring, et al. GBZ 1 plays a directive role in government decision-making, control of constructive projects from the beginning, training and capacity building of occupational health professionals, and the prevention and treatment of occupational diseases in enterprises, needing to strengthen the implementation of GBZ 1. And on the basis of the above key technical issues to be revised, international cooperation and exchanges should be strengthened, so that it is adapted to the development of the modern enterprise system.

Political Issues Skills Kit: Comparing Political Experiences, Experimental Edition.

ERIC Educational Resources Information Center

Gillespie, Judith A.; Lazarus, Stuart

Designed to be an integral part of the second-semester "Comparing Political Experiences" course, this skills kit provides supplementary student activities for four documentary "Political Issues" units. The kit is divided into three sections on skills. The analytical skill section provides exercises on six analytical skills…

What Recruiters Should Look for in Applicants.

ERIC Educational Resources Information Center

Steele, E.W.

1981-01-01

One method for determining requirements of job applicants is to survey, by function, various segments of the company. A three-part questionnaire was designed to identify the preferences of hiring supervisors, the personal attitudes of management, and feelings related to recruiting women/minorities and obsolete employees. (Author/KMF)

Combatting Sexist Attitudes through Writing.

ERIC Educational Resources Information Center

Popham, Rae Jeane

A composition activity designed to raise students' consciousness of sexually stereotyped language and to encourage exploration of assumptions about men, women, and language had three parts: students were given a list of ten concrete details about an activity commonly associated with men or women (backpacking, cooking hamburgers, and grocery…

Weaving Women's Health across Clinical Clerkships.

ERIC Educational Resources Information Center

Magrane, Diane; Ephgrave, Kimberly; Jacobs, Michael; Rusch, Roberta

2000-01-01

Describes three approaches to designing and implementing women's health curricula: (1) adding courses to existing curricula; (2) delegating parts of the curriculum to existing courses; and (3) creating new interdisciplinary curricula. Discusses how each might be applied to the topic of domestic violence. Emphasizes the importance of collaborative…

A Web-based Examination System Based on PHP+MySQL.

PubMed

Wen, Ji; Zhang, Yang; Yan, Yong; Xia, Shunren

2005-01-01

The design and implementation of web-based examination system constructed by PHP and MySQL is presented in this paper. Three primary parts, including students',teachers' and administrators', are introduced and analyzed in detail. Initial application has demonstrated the system's feasibility and reasonability.^*

Survival Counseling Skills for New Teachers.

ERIC Educational Resources Information Center

Pirtle, Trace N.; Perez, Patricia

This paper describes a three-part project designed collaboratively by a university professor and a public school teacher to increase teaching interns' knowledge, awareness, and skill in conceptualizing and intervening with challenging students and better prepare them for persisting in the classroom. Participants were 64 undergraduate students. The…

How Capitalistic Is the Constitution?

ERIC Educational Resources Information Center

Goldwin, Robert A., Ed.; Schambra, William A., Ed.

Second in a three-part series designed to help prepare the nation for a thoughtful observance of the Constitutional bicentennial, this publication contains seven essays on the topic of capitalism and the Constitution. "American Democracy and the Acquisitive Spirit" (Marc F. Plattner) supports the argument that the framers of the…

Planet Neighborhood. [Videotape.

ERIC Educational Resources Information Center

National Academy of Engineering, Washington, D.C.

This multimedia environmental project aims to raise public awareness about the environmental and economic benefits of recently developed green technologies designed to protect the environment. The heart of the project is a three-part television series on the Public Broadcasting Service whose areas are home, work and community. Topics include old…

Evaluation criteria for district health management information systems: lessons from the Ministry of Health, Kenya.

PubMed

Odhiambo-Otieno, George W

2005-01-01

There has been no comprehensive evaluation of the district health management information systems (DHMISs) since the establishment of these systems by the Ministry of Health (MoH), in Kenya. This is partly due to lack of defined criteria for evaluating the systems. The objective of this study is to design evaluation criteria for assessing the viability, sustainability and ultimate contribution of DHMIS in the management of the district health system (DHS) in Kenya. This descriptive cross-sectional study was undertaken in three DHSs in Kenya. Empirical evidence was collected through interviews, complemented by a comprehensive review of relevant literature, reports and operational manuals of various health information systems in Kenya. A set of evaluation criteria for DHMISs in Kenya was designed for each of the three phases of implementation: phase one-pre-implementation evaluation criteria (categorized as policy and objectives, technical feasibility, financial viability, political viability and administrative operability) to be applied at the design stage; phase two-concurrent (operational) implementation evaluation criteria to be applied during implementation of the new system; phase three-post-implementation evaluation criteria (classified as internal-quality of information; external-resources and managerial support; ultimate-systems impact) to be applied after operating the implemented system for at least 3 years. In designing a DHMIS model there is need to have built-in these three sets of evaluation criteria which should be used in a phased manner. Pre-implementation evaluation criteria should be used to evaluate the system's viability before more resources are committed to its implementation; concurrent (operational) implementation evaluation criteria should be used to ascertain the status of the on-going implementation with the view to either fine-tune or abandon it altogether before more resources are used on it; and post-implementation evaluation criteria should be used to assess its overall effectiveness (if it has achieved its hypothesized benefits) towards the management of DHS.

Synergies between agriculture and bioenergy in Latin American countries: A circular economy strategy for bioenergy production in Ecuador.

PubMed

Vega-Quezada, Cristhian; Blanco, María; Romero, Hugo

2017-10-25

This study quantifies the synergies between agriculture and bioenergy considering biodiesel production as part of a set of systemic initiatives. We present a case study in Ecuador taking into account the recent government measures aimed at developing the bioenergy sector. Four scenarios have been evaluated through a newly designed systemic scheme of circular-economy initiatives. These scenarios encompass three production pathways covering three energy crops: palm oil (PO), microalgae in open ponds (M1) and microalgae in laminar photobioreactors (M2). We have applied Benefit-Cost Analysis (BCA) methodology considering the Net Present Value (NPV) and the Benefit-Cost Ratio (BCR) as the main evaluation criteria. In terms of private investment, biodiesel production from PO is more attractive than from M2. However, regarding efficiency and effectiveness of public funds, M2 is superior to PO because the public BCR and NPV are higher, and the pressure on agricultural land is lower. Moreover, M2 as part of a systemic approach presents a better carbon balance. These findings show that, under a systemic approach based on circular economy, strategies like the one analyzed in this study are economically feasible and may have a promising future. Copyright © 2016 Elsevier B.V. All rights reserved.

The Qualitative Measurement towards Emotional Feeling of Design for Product Development

NASA Astrophysics Data System (ADS)

Syaifoelida, Fevi; Megat Hamdan, M. A. M.; Murrad, M.; Aminuddin, Hazim

2018-04-01

To compete in today’s ever-growing technology market, a product needs to be well presentable to the customers. It is a challenge to design a product that is able to attract customer’s attention and to build their loyalty towards the product. A product needs to be designed with focus to give the maximum level of satisfaction to the end user which is the customer. That is the focus of this paper, to achieve customer’s satisfaction, by studying feelings and emotional value related to product designs using Kansei Engineering (KE) and to test how important that product element (level of satisfaction) by using Kano Method (KM). KE is a method of translating human emotions and feelings into product development. The method studies the human interaction and responses when a customer sees a product, then translates it into a new improved design. However, KE cannot stand on its own. It did not specify in which extends the feeling or emotions is important in a product. After we had the design appearance parameters from KE and existing design evaluation, it need to be classified which is more important than the other is. That is why Kano Method (KM) will also be used. Since this scope of study towards an emotional feeling of design (existing part/appearance) in Kano categories not in deep function of technical requirement, so KM will help to classify parts of product into categories, which part will give fully satisfaction while using it. It studies the more important attributes considered by the customers for improvement. The objective is to find out the design priority guide that can be used to maximize customer’s satisfaction. Therefore, in order to apply the qualitative measurement idea into the real situation, the headphone product is chosen (popular among students) as the product (the appearance of part, feeling when use it) domain for this study. As the results progressed, it was found out that the headband part of headphone is the most important part of the product. It needs to be durable and comfortably designed to give full satisfaction while using (Kano-functional). The research and development (R&D), and designing process of a product can be improved greatly to increase the customer’s satisfaction by capturing their emotional feeling in physiological design.

Development of the RFBB “Bargouzine” concept for Ariane-5 evolution

NASA Astrophysics Data System (ADS)

Sumin, Yuriy; Kostromin, Sergey F.; Panichkin, Nikolai; Prel, Yves; Osin, Mikhail; Iranzo-Greus, David; Prampolini, Marco

2009-10-01

This paper presents the study of a concept of Ariane-5 evolution by means of replacement of two solid-propellant boosters EAP with two liquid-propellant reusable fly-back boosters (RFBBs) called "Bargouzine". The main design feature of the reference RFBB is LOX/LH2 propellant, the canard aerodynamic configuration with delta wings and rocket engines derived from Vulcain-2 identical to that of the central core except for the nozzle length. After separation RFBBs return back by use of air breathing engines mounted in the aft part and then landing on a runway. The aim of the study is a more detailed investigation of critical technology issues concerning reliability, re-usability and maintenance requirements. The study was performed in three main phases: system trade-off, technical consolidation, and programmatic synthesis. The system trade-off includes comparative analysis of two systems with three and four engines on each RFBB and determination of the necessary thrust level taking into account thrust reservation for emergency situations. Besides, this phase contains trade-off on booster aerodynamic configurations and abort scenario analysis. The second phase includes studying of controllability during the ascent phase and separation, thermo-mechanical design, development of ground interfaces and attachment means, and turbojets engine analysis taking into account reusability.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 8: Summary report to phase 3 faculty and student respondents

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Kennedy, John M.; White, Terry F.

1991-01-01

Phase 3 of a four part study was undertaken to investigate the use of scientific and technical information (STI) in the academic aerospace community. Three questionnaires that were sent to three groups (i.e., faculty, librarians, and students) in the academic aerospace community were used. Specific attention was paid to the types of STI used and the methods in which academic users acquired STI. The focus is on the responses of two of the three groups: faculty in aerospace departments and students enrolled in the USRA-funded capstone design courses. Respondents in both groups relied heavily upon informal sources of information, although students were less inclined to regard their personal collections of STI as important. Both groups relied upon most formal sources of STI about the same, but students reported more difficulty in using the formal resources.

Behavioural approaches to treating overweight and obesity in adolescents.

PubMed

Alkhawaldeh, Abdullah; Khatatbeh, Moawiah; ALBashtawy, Mohammed; Al-Awamreh, Khetam; Al Qadire, Mohammad; ALOmari, Omar; Khasawneh, Barakat; ALBashtawy, Bayan; ALBashtawy, Sa'd; Alshakh, Hind

2017-11-07

Being overweight and obese in adolescence are significant global public health issues which threaten the viability of basic healthcare delivery in many countries. The number of affected adolescents is growing at an alarming rate. Behavioural treatment, which refers to a set of principles and techniques designed to help people reverse maladaptive eating and activity habits, has become a crucial part of most programmes designed to address overweight and obesity. This article outlines three steps involved in the behavioural treatment of overweight and obesity in adolescents: antecedents, eating behaviour and the consequences of eating behaviour. Regular and consistent daily recording of food intake and the individual's activities are foundations of behavioural management, and should form part of the nursing care plan. ©2017 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.