A guide to selected non-timber forest products of the Hayfork Adaptive Management Area, Shasta-Trinity and Six Rivers National Forests, California

Treesearch

Yvonne Everett

1997-01-01

Demand for non-timber forest products (NTFPs) is increasing, and growing numbers of people are enhancing their incomes by harvesting NTFPs from the wild. If forest ecosystems are to continue to produce NTFPs in the long run, harvesters must learn how to gather them in ways that minimize harvest damage to woods and wildlife. This guide, developed in a collaborative,...

Forest treatment opportunities for Kansas 1982-1991.

Treesearch

W. Brad Smith; W.J. Moyer

1984-01-01

Reviews treatment opportunities for timber stands in Kansas from 1982 to 1991. Under the assumptions and management guides specified, 45% of Kansas' commercial forest land would benefit from timber harvest or some other form of treatment during the decade.

Hybrid system of unbonded post-tensioned CLT panels and light-frame wood shear walls

Treesearch

T. Ho; T. Dao; S. Aaleti; J. van de Lindt; Douglas Rammer

2016-01-01

Cross-laminated timber (CLT) is a relatively new type of massive timber system that has shown to possess excellent mechanical properties and structural behavior in building construction. When post-tensioned with high-strength tendons, CLT panels perform well under cyclic loadings because of two key characteristics: their rocking behavior and self-centering capacity....

Projecting treatment opportunities for current Minnesota forest conditions.

Treesearch

W. Brad Smith; Pamela J. Jakes

1981-01-01

Reviews opportunities for treatment of timber stands in Minnesota for the decade of 1977-1986. Under the assumptions and management guides specified, 27% of Minnesota's commercial forest land would require timber harvest or some other form of treatment during the decade.

The "let-it-grow" treatment for timber -- Is it economically worthwhile?

Treesearch

David P. Worley; David P. Worley

1970-01-01

One way to treay a timber stand is to ignore it--simply let it grow. This treatment will in time produce usable timber. And this is how many small woodlands in the Northeast are treated today. The question is: How well does this treatment work in returning a profit to the owner? As a guide for forest managers, the Northeastern Forest Experiment Station has made an...

Wood digestion in Pselactus spadix Herbst--a weevil attacking marine timber structures.

PubMed

Oevering, Pascal; Pitman, Andrew J; Pandey, Krishna K

2003-04-01

Pselactus spadix tunnels timber structures in the marine environment. Recent studies reported a cosmopolitan distribution for this weevil, which is frequently found in harbour and port areas. P. spadix feeds on timber (hardwood and softwood) in immature and adult life stages, but its digestion of wood components had not been investigated. Using dry weight analyses of tunnel walls and frass produced, P. spadix adults consumed Scots pine with soft rot decay at a rate of 1.59 +/- 0.37 mg d-1 and the digestibility of this substrate was 57.96 +/- 5.89 (i.e. for 100 mg consumed SR-pine, 58 mg was digested). Using gravimetric analysis to quantify structural wood components in tunnel walls and frass, P. spadix adults were found to digest cellulose, lignin and hemicellulose with digestibility coefficients of 82.2, 41.2 and 14.5 respectively. Fourier Transform Infrared (FTIR) spectroscopy analyses of tunnel walls and frass of adults and larvae from soft rotted pine also indicated digestion of all structural components, with larvae digesting cellulose and lignin more efficiently than adults. When FTIR was employed to analyse adult tunnel walls and frass from undecayed pine, cellulose and hemicellulose were digested, but no evidence of lignin digestion was found. This study shows that adults digest lignin when soft rot is present and suggests a symbiotic function of wood degrading microorganisms.

Determination of seismic performance factors for CLT shear wall systems

Treesearch

M. Omar Amini; John W. van de Lindt; Douglas Rammer; Shiling Pei; Philip Line; Marjan Popovski

2016-01-01

This paper presents selected results of connector testing and wall testing which were part of a Forest Products Lab-funded project undertaken at Colorado State University in an effort to determine seismic performance factors for cross laminated timber (CLT) shear walls in the United States. Archetype development, which is required as part of the process, is also...

A users guide for SAMM: a prototype southeast Alaska multiresource model.

Treesearch

D.L. Weyermann; R.D. Fight; L.D. Garrett

1991-01-01

This paper instructs resource analysts on using the southeast Alaska multiresource model (SAMM). SAMM is an interactive microcomputer program that allows users to explore relations among several resources in southeast Alaska (timber, anadromous fish. deer, and hydrology) and the effects of timber management activities (logging, thinning, and road building) on those...

User’s guide to SNAP for ArcGIS® :ArcGIS interface for scheduling and network analysis program

Treesearch

Woodam Chung; Dennis Dykstra; Fred Bower; Stephen O’Brien; Richard Abt; John. and Sessions

2012-01-01

This document introduces a computer software named SNAP for ArcGIS® , which has been developed to streamline scheduling and transportation planning for timber harvest areas. Using modern optimization techniques, it can be used to spatially schedule timber harvest with consideration of harvesting costs, multiple products, alternative...

Design Methods for Load-bearing Elements from Crosslaminated Timber

NASA Astrophysics Data System (ADS)

Vilguts, A.; Serdjuks, D.; Goremikins, V.

2015-11-01

Cross-laminated timber is an environmentally friendly material, which possesses a decreased level of anisotropy in comparison with the solid and glued timber. Cross-laminated timber could be used for load-bearing walls and slabs of multi-storey timber buildings as well as decking structures of pedestrian and road bridges. Design methods of cross-laminated timber elements subjected to bending and compression with bending were considered. The presented methods were experimentally validated and verified by FEM. Two cross-laminated timber slabs were tested at the action of static load. Pine wood was chosen as a board's material. Freely supported beam with the span equal to 1.9 m, which was loaded by the uniformly distributed load, was a design scheme of the considered plates. The width of the plates was equal to 1 m. The considered cross-laminated timber plates were analysed by FEM method. The comparison of stresses acting in the edge fibres of the plate and the maximum vertical displacements shows that both considered methods can be used for engineering calculations. The difference between the results obtained experimentally and analytically is within the limits from 2 to 31%. The difference in results obtained by effective strength and stiffness and transformed sections methods was not significant.

Logging Activity in the Trinational Amazonian Region of Pando/Bolivia, Acre and Rond“nia/Brazil, and Madre de Dios/Peru: Analysis of Existing Data

NASA Astrophysics Data System (ADS)

Mendoza, E.; Brilhante, S. H.; Brown, I.; Peralta, R.; Rivero, S.; Melendez, N.

2002-12-01

Logging activity in the trinational southwestern Amazonia will grow in importance as a driver of regional land-use change as expanding road access facilitates both timber extraction and transport to international markets. Official data on current activity in this ~50 million ha region are limited and inconsistent with differences as much as twenty-fold between official estimates; nevertheless, they serve as guides for understanding the relative magnitude of logging activities. For 2000, an estimated 5 million m3 of timber were commercialized in Rondonia, 400,000 m3 in Acre, Brazil, and 200,000 m3 for the combined departments of Pando, Bolivia and Madre de Dios, Peru. About 70% of this timber originates from clear cutting done for pasture and agriculture activities, nearly a third from unregulated selective logging, and only 2% from managed selective logging. Eight timber species are preferentially extracted. The total area for timber concessions in Acre, Pando and Madre de Dios extends to about 4 million ha for a potential timber supply of 65 million m3. About 150,000 m3/yr of illegal timber is confiscated by federal and state agencies in Acre, Pando and Madre de Dios. Problems of enforcement in the region are due principally to the lack of trained personnel and little cooperation among agencies of the three countries. Proposed development plans indicate a 3- to >10-fold increase in logging activity in the Acre and Pando regions during the coming decade. More detailed studies are urgently needed to guide sustainable development of this resource in southwestern Amazonia.

Estimating risk of debris slides after timber harvest in northwestern California

Treesearch

M. K. Neely; R. M. Rice

1990-01-01

Abstract - The risk of debris slides resulting from logging must often be appraised by foresters planning timber harvests. The Board of Forestry of the State of California commissioned the development of a Mass Movement Checklist to guide foresters making such appraisals. The classification accuracy of the Checklist, tested using 50 logging-related debris slides and 50...

Upgrading Basements for Combined Nuclear Weapons Effects: Expedient Options

DTIC Science & Technology

1976-05-01

reinforced concrete stairwell walls can be expected to be substantial in these cases, since they are supporting an axial load from higher floors. F...desirability) include: a. Stacked concrete block or brick b. Stacked timber * The latter situation is likely to occur only in load - bearing wall...concrete flat slab 4 Reinforced concrete flat plate 4 Load - bearing wall 3 The analysis of the floor systems for the 34 NSS buildings required the dynamic

A silvicultural guide for northern hardwoods in the northeast

Treesearch

William B. Leak; Dale S. Solomon; Stanley M. Filip; Stanley M. Filip

1969-01-01

The purpose of this paper is to provide a practical guide to the management of northern hardwoods - principally beech, birch, and maple-in the Northeast. The guide was designed to provide the kind of information that is needed not only for long-term management planning, but also for short-term silvicultural prescriptions for specific timber stand conditions. The guide...

Silvicultural guide for northern hardwood types in the Northeast (revised)

Treesearch

William B. Leak; Dale S. Solomon; Paul S. DeBald

1987-01-01

A practical guide to the management of northern hardwoods for timber production in New England and New York. Both even-aged management are considered, and specific treatments are prescribed for a range of stand conditions and management objectives.

Mining Careers. Instructor's Manual and Student's Basic Course of Study. Recommended Courses for Entry Level Miner, General Inside Laborer, Timber Framer, Face Worker.

ERIC Educational Resources Information Center

Admiral Peary Area Vocational-Technical School, Ebensburg, PA.

Guides for organizing and individualizing three courses of study for job training in the mining careers of entry level miner, general inside laborer/timber framer, and faceman are presented in this manual. Introductory information includes (1) suggestions for utilizing, modifying, or customizing materials (task sheets) in the manual to suit…

Forest landowners’ guide to the Federal income tax

Treesearch

John L. Greene; William C. Siegel; William L. Hoover; Mark Koontz

2013-01-01

This guide updates and supersedes Agriculture Handbook No. 718, Forest Landowners’ Guide to the Federal Income Tax, incorporating new tax legislation that was passed and administrative changes promulgated through September 30, 2012. It introduces tax planning and basic tax considerations and explains the Federal income tax as it pertains to timber and forest land,...

Silvicultural guide for paper birch in the northeast (revised)

Treesearch

L. O. Safford

1983-01-01

This revised guide provides practical information on silvicultural treatments to grow paper birch as a timber crop. It covers treatments for existing stands, the regeneration of new stands, and subsequent culture to maturity. The stocking chart has been revised to reflect results of current growth studies.

Life Cycle Greenhouse Gas Emissions and Energy Analysis of Passive House with Variable Construction Materials

NASA Astrophysics Data System (ADS)

Baďurová, Silvia; Ponechal, Radoslav; Ďurica, Pavol

2013-11-01

The term "passive house" refers to rigorous and voluntary standards for energy efficiency in a building, reducing its ecological footprint. There are many ways how to build a passive house successfully. These designs as well as construction techniques vary from ordinary timber constructions using packs of straw or constructions of clay. This paper aims to quantify environmental quality of external walls in a passive house, which are made of a timber frame, lightweight concrete blocks and sand-lime bricks in order to determine whether this constructional form provides improved environmental performance. Furthermore, this paper assesses potential benefit of energy savings at heating of houses in which their external walls are made of these three material alternatives. A two storey residential passive house, with floorage of 170.6 m2, was evaluated. Some measurements of air and surface temperatures were done as a calibration etalon for a method of simulation.

5. VIEW NORTHWEST SHOWING AQUEDUCT PRISM. NOTE INTERIOR STONE WORK ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. VIEW NORTHWEST SHOWING AQUEDUCT PRISM. NOTE INTERIOR STONE WORK OF THE PARAPET WALL AND REMAINS OF 1920 TIMBER AND CONCRETE FLOORING SYSTEM. - Chesapeake & Ohio Canal, Conococheague Creek Aqueduct, Milepost 99.80, Williamsport, Washington County, MD

GPR technique as a tool for decision-making regarding timber beam inner reinforcement: The Lonja de la Seda de Valencia, Spain

NASA Astrophysics Data System (ADS)

García, Francisco; Ramirez, Manuel; Benlloch, Javier; Valls, Ana

2015-04-01

This paper describes the decision-making process for the timber beam inner reinforcement of the building The Lonja de la Seda de Valencia (15th c.), Spain. This research was based on the study of 13 timber beams for their diagnosis and the characterization before decision-making in structural reinforcement. For this purpose, we integrated the results of analysis of historical documentation, in situ visual inspection and ground penetrating radar (GPR). The rehabilitation project considered the substitution of the upper-storey floor (The Consulate of the Sea Hall) for another one that complied with the original. This room was closed due to the instability of the timber beams. For the flooring renovation it was necessary to increase the rigidity of the timber floor framing. Preliminary conclusions, which derived from the historical documentation and in situ visual inspection of the timber coffered ceiling were: (a) timber beams supported inside masonry walls could suffer moisture and xylophage attacks, (b) timber beams were significantly damaged (splits, ring shakes, failure of beam section that reduced its bearing capacity), (c) substantial timber beam warping. So the main objectives of this GPR study were: to detect splits, to identify failure of section due to biological attacks, to pinpoint epoxy resin reconstructions and to assess the severity of the damages observed on surface. A GPR survey was carried out in timber coffered-ceiling beams of The Consulate of the Sea Hall. Radar measurements were carried out using a SIR-10H system (GSSI) and a 1.6 GHz ground coupled antenna, due to the timber beam dimensions (0.45 x 0.45 x 8.75 m. A total of 37 longitudinal profiles were collected in the centre of all the beam accessible sides. After radragram processing steps, a number of anomalies were detected in the records, which were analysed. The outcomes derived from this GPR study were taken into account when it came to make decisions in the final restoration project of the timber coffered ceiling elements: timber beams, wooden latticework and floor. The results obtained in this survey are a good example of GPR application in Civil Engineering for timber beam inner reinforcement of a building, establishing technical criteria.

My fuel treatment planner: a user guide.

Treesearch

Robin L. Biesecker; Roger D. Fight

2006-01-01

My Fuel Treatment Planner (MyFTP) is a tool for calculating and displaying the financial costs and potential revenues associated with forest fuel reduction treatments. It was designed for fuel treatment planners including those with little or no background in economics, forest management, or timber sales. This guide provides the information needed to acquire, load, and...

A silvicultural Guide for Spruce-Fir in the Northeast

Treesearch

Robert M. Frank; John C. Bjorkbom

1973-01-01

A practical guide to the silvicultural treatment of spruce-fir stands for timber production in New England and New York. Both evenaged and uneven-aged management are considered, covering both the establishment of new stands and the culture of existing stands. Includes a set of prescriptions describing specific treatments for a range of stand conditions and management...

Sensitivity of the downward to sweeping velocity ratio to the bypass flow percentage along a guide wall for downstream fish passage

USGS Publications Warehouse

Mulligan, Kevin; Towler, Brett; Haro, Alexander J.; Ahlfeld, David P.

2017-01-01

Partial-depth impermeable guidance structures (or guide walls) are used as a method to assist in the downstream passage of fish at a hydroelectric facility. However, guide walls can result in a strong downward velocity causing the approaching fish to pass below the wall and into the direction of the turbine intakes. The objective of this study was to describe how the ratio of the vertical velocity to the sweeping velocity magnitude changes along the full length and depth of a guide wall under a wide range of bypass flow percentages within a power canal. This paper focused on two guide wall configurations, each set at an angle of 45 ° to the approaching flow field and at a depth of 10 and 20 ft (3.05 and 6.10 m). The hydraulic conditions upstream of each guide wall configuration were shown to be impacted by a change in the bypass flow percentage, not only near the bypass but also at upstream sections of the guide wall. Furthermore, the effect of changing the bypass flow percentage was similar for both guide wall depths. In both cases, the effect of increasing the bypass flow percentage was magnified closer to the bypass and deeper in the water column along the guide wall.

Downstream fish passage guide walls: A hydraulic scale model analysis

USGS Publications Warehouse

Mulligan, Kevin; Towler, Brett; Haro, Alexander J.; Ahlfeld, David P.

2018-01-01

Partial-depth guide walls are used to improve passage efficiency and reduce the delay of out-migrating anadromous fish species by guiding fish to a bypass route (i.e. weir, pipe, sluice gate) that circumvents the turbine intakes, where survival is usually lower. Evaluation and monitoring studies, however, indicate a high propensity for some fish to pass underneath, rather than along, the guide walls, compromising their effectiveness. In the present study we evaluated a range of guide wall structures to identify where/if the flow field shifts from sweeping (i.e. flow direction primarily along the wall and towards the bypass) to downward-dominant. Many migratory fish species, particularly juveniles, are known to drift with the flow and/or exhibit rheotactic behaviour during their migration. When these behaviours are present, fish follow the path of the flow field. Hence, maintaining a strong sweeping velocity in relation to the downward velocity along a guide wall is essential to successful fish guidance. Nine experiments were conducted to measure the three-dimensional velocity components upstream of a scale model guide wall set at a wide range of depths and angles to flow. Results demonstrated how each guide wall configuration affected the three-dimensional velocity components, and hence the downward and sweeping velocity, along the full length of the guide wall. In general, the velocities produced in the scale model were sweeping dominant near the water surface and either downward dominant or close to the transitional depth near the bottom of the guide wall. The primary exception to this shift from sweeping do downward flow was for the minimum guide wall angle tested in this study (15°). At 15° the flow pattern was fully sweeping dominant for every cross-section, indicating that a guide wall with a relatively small angle may be more likely to produce conditions favorable to efficient guidance. A critical next step is to evaluate the behaviour of migratory fish as they approach and swim along a guide wall in a controlled laboratory environment.

Assessment of dynamic and long-term performance of an innovative multi-story timber building via structural monitoring and dynamic testing

NASA Astrophysics Data System (ADS)

Omenzetter, Piotr; Morris, Hugh; Worth, Margaret; Gaul, Andrew; Jager, Simon; Desgeorges, Yohann

2012-04-01

An innovative three-story timber building, using self-centering, post-tensioned timber shear walls as the main horizontal load resisting system and lightweight non-composite timber-concrete floors, has recently been completed in Nelson, New Zealand. It is expected to be the trailblazer for similar but taller structures to be more widely adopted. Performance based standards require an advanced understanding of building responses and in order to meet the need for in-situ performance data the building has been subjected to forced vibration testing and instrumented for continuous monitoring using a total of approximately 90 data channels to capture its dynamic and long-term responses. The first part of the paper presents a brief discussion of the existing research on the seismic performance of timber frame buildings and footfall induced floor vibrations. An outline of the building structural system, focusing on the novel design solutions, is then discussed. This is followed by the description of the monitoring system. The analysis of monitoring results starts with a discussion of the monitoring of long-term deformations. Next, the assessment of the floor vibration serviceability performance is outlined. Then, the forced vibration tests conducted on the whole building at different construction stages are reviewed. The system identification results from seismic shaking records are also discussed. Finally, updating of a finite element model of the building is conducted.

System identification of timber masonry walls using shaking table test

NASA Astrophysics Data System (ADS)

Roy, Timir B.; Guerreiro, Luis; Bagchi, Ashutosh

2017-04-01

Dynamic study is important in order to design, repair and rehabilitation of structures. It has played an important role in the behavior characterization of structures; such as: bridges, dams, high rise buildings etc. There had been substantial development in this area over the last few decades, especially in the field of dynamic identification techniques of structural systems. Frequency Domain Decomposition (FDD) and Time Domain Decomposition are most commonly used methods to identify modal parameters; such as: natural frequency, modal damping and mode shape. The focus of the present research is to study the dynamic characteristics of typical timber masonry walls commonly used in Portugal. For that purpose, a multi-storey structural prototype of such wall has been tested on a seismic shake table at the National Laboratory for Civil Engineering, Portugal (LNEC). Signal processing has been performed of the output response, which is collected from the shaking table experiment of the prototype using accelerometers. In the present work signal processing of the output response, based on the input response has been done in two ways: FDD and Stochastic Subspace Identification (SSI). In order to estimate the values of the modal parameters, algorithms for FDD are formulated and parametric functions for the SSI are computed. Finally, estimated values from both the methods are compared to measure the accuracy of both the techniques.

Economic data for wildland planning and management in the western United States: a source guide

Treesearch

Eric Eisenman; Lee C. Wensel; Edward C. Thor; Thomas W. Stuart

1980-01-01

This guide identifies and describes sources of economic data useful to wildland managers and planners in the Western United States. The data are categorized by six types of management activities: outdoor recreation and wilderness; wildlife and fish; range; timber; land and water; and minerals and energy. For each type of activity, data sources are identified as to...

Stress wave timing nondestructive evaluation tools for inspecting historic structures : a guide for use and interpretation.

Treesearch

Robert Ross; Roy F. Pellerin; Norbert Volny; William W. Salsig; Robert H. Falk

2000-01-01

This guide was prepared to assist inspectors in the use of stress wave timing instruments and various methods of locating and defining areas of decay in timber members in historic structures. The first two sections provide (a) background information regarding conventional methods to locate and measure decay in historic structures and (b) the principles of stress wave...

U.S. conterminous wall-to-wall anthropogenic land use trends (NWALT), 1974–2012

USGS Publications Warehouse

Falcone, James A.

2015-09-14

This dataset provides a U.S. national 60-meter, 19-class mapping of anthropogenic land uses for five time periods: 1974, 1982, 1992, 2002, and 2012. The 2012 dataset is based on a slightly modified version of the National Land Cover Database 2011 (NLCD 2011) that was recoded to a schema of land uses, and mapped back in time to develop datasets for the four earlier eras. The time periods coincide with U.S. Department of Agriculture (USDA) Census of Agriculture data collection years. Changes are derived from (a) known changes in water bodies from reservoir construction or removal; (b) housing unit density changes; (c) regional mining/extraction trends; (d) for 1999–2012, timber and forestry activity based on U.S. Geological Survey (USGS) Landscape Fire and Resource Management Planning Tools (Landfire) data; (e) county-level USDA Census of Agriculture change in cultivated land; and (f) establishment dates of major conservation areas. The data are compared to several other published studies and datasets as validation. Caveats are provided about limitations of the data for some classes. The work was completed as part of the USGS National Water-Quality Assessment (NAWQA) Program and termed the NAWQA Wall-to-Wall Anthropogenic Land Use Trends (NWALT) dataset. The associated datasets include five 60-meter geospatial rasters showing anthropogenic land use for the years 1974, 1982, 1992, 2002, and 2012, and 14 rasters showing the annual extent of timber clearcutting and harvest from 1999 to 2012.

20. Photocopied August 1978. CANAL SECTION III, LOOKING SOUTH, AUGUST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

20. Photocopied August 1978. CANAL SECTION III, LOOKING SOUTH, AUGUST OR SEPTEMBER 1900, FOLLOWING A MAJOR BANK SLIDE. SLIDES LIKE THIS ONE WERE FAIRLY FREQUENT FOLLOWING RAIN STORMS BEFORE THE CANAL WALLS WERE TIMBER LINED IN THE EARTH SECTIONS. (64) - Michigan Lake Superior Power Company, Portage Street, Sault Ste. Marie, Chippewa County, MI

Costs of reducing sapling basal area in thinned cherry-maple stands in West Virginia

Treesearch

Gary W. Miller

1984-01-01

Unmanaged 60-year-old cherry-maple stands in West Virginia were thinned to three levels of stocking according to the Allegheny hardwoods stocking guide. After the merchantable timber was removed, the basal area in saplings was reduced to less than 10 ft² per acre (2.3 m²/ha), as the guide recommends for stands with dense understories. A detailed time...

Long-term monitoring and field testing of an innovative multistory timber building

NASA Astrophysics Data System (ADS)

Omenzetter, Piotr; Morris, Hugh; Worth, Margaret; Kohli, Varun; Uma, S. R.

2011-04-01

An innovative three-story timber building, using self-centering, post-tensioned timber shear walls as the main horizontal load resisting system and lightweight composite timber-concrete floors, has recently been completed in Nelson, New Zealand. It is expected to be the trailblazer for similar but taller structures to be more widely adopted. Performance based standards require an advanced understanding of building responses and in order to meet the need for in-situ performance data the building has been subjected to forced vibration testing and instrumented for continuous monitoring using a total of about 90 data channels to capture its dynamic and long-term responses. The first part of the paper presents a brief discussion of the existing research on the seismic performance of timber frame buildings and footfall induced floor vibrations. An outline of the building structural system, focusing on the novel design solutions, is then discussed. This is followed by the description of the monitoring system. The paper emphasizes the need for optimal placement of a limited number of sensors and demonstrates how this was achieved for monitoring floor vibrations with the help of the effective independence-driving point residue (EfI-DPR) technique. A novel approach to the EfI-DPR method proposed here uses a combinatorial search algorithm that increases the chances of obtaining the globally optimal solution. Finally, the results from the forced vibration tests conducted on the whole building at different construction stages are reviewed.

28. Photocopied August 1978. UPPER INTAKE COFFER DAM, OCTOBER 7, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

28. Photocopied August 1978. UPPER INTAKE COFFER DAM, OCTOBER 7, 1901. LOGS WERE PLACED ON THE WATER SIDE OF THIS DAM TO COUNTERACT WAVE ACTION AGAINST THE DAM. NOTE THE TIMBER RETAINING WALL ON THE NORTH SIDE OF THE LOWER INTAKE. (185) - Michigan Lake Superior Power Company, Portage Street, Sault Ste. Marie, Chippewa County, MI

Laparoscopic-guided abdominal wall nerve blocks in the pediatric population: a novel technique with comparison to ultrasound-guided blocks and local wound infiltration alone.

PubMed

Landmann, Alessandra; Visoiu, Mihaela; Malek, Marcus M

2018-03-01

Abdominal wall nerve blocks have been gaining popularity for the treatment of perioperative pain in children. Our aim was to compare a technique of surgeon-performed, laparoscopic abdominal wall nerve blocks to anesthesia-placed, ultrasound-guided abdominal wall nerve blocks and the current standard of local wound infiltration. After institutional review board approval was obtained, a retrospective chart review was performed of pediatric patients treated at a single institution during a 2-year period. Statistics were calculated using analysis of variance with post-hoc Bonferonni t tests for pair-wise comparisons. Included in this study were 380 patients who received ultrasound-guided abdominal wall nerve blocks (n = 125), laparoscopic-guided abdominal wall nerve blocks (n = 88), and local wound infiltration (n = 117). Groups were well matched for age, sex, and weight. There was no significant difference in pain scores within the first 8 hours or narcotic usage between groups. Local wound infiltration demonstrated the shortest overall time required to perform (P < .0001). Patients who received a surgeon-performed abdominal wall nerve block demonstrated a shorter duration of hospital stay when compared to the other groups (P = .02). Our study has demonstrated that laparoscopic-guided abdominal wall nerve blocks show similar efficacy to ultrasound-guided nerve blocks performed by pain management physicians without increasing time in the operating room. Copyright © 2017 Elsevier Inc. All rights reserved.

Construction Guide to Next-Generation High-Performance Walls in Climate Zones 3-5 - Part 2: 2x4 Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kochkin, V.; Wiehagen, J.

2017-06-01

Part 2 of this Construction Guide to High-Performance Walls in Climate Zones 3-5 provides straightforward and cost-effective strategies to construct durable, energy-efficient walls. It addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low-rise residential buildings up to three stories high. Walls with 2x6 framing are addressed in Part 1 of the Guide.

Construction Guide to Next-Generation High-Performance Walls in Climate Zones 3-5 - Part 2: 2x4 Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kochkin, V.; Wiehagen, J.

Part 2 of this Construction Guide to High-Performance Walls in Climate Zones 3-5 provides straightforward and cost-effective strategies to construct durable, energy-efficient walls. It addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low-rise residential buildings up to three stories high. Walls with 2x6 framing are addressed in Part 1 of the Guide.

Tax Tips for Forest Landowners for the 2007 Tax Year

Treesearch

Linda Wang; John L. Greene

2007-01-01

This guide is designed to assist owners of forest land with timber tax information. It is current as of October 1, 2007, and supercedes Management Bulletin R8-MB 128. It is strictly for educational purposes; consult your legal and tax professionals for advice on a specific tax situation.

THE FORESTRY AIDE, A SUGGESTED TRAINING PROGRAM.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

THE PURPOSE OF THIS CURRICULUM GUIDE IS TO ASSIST TEACHERS IN PLANNING AND CONDUCTING A 45-WEEK COURSE AT THE POSTSECONDARY LEVEL TO PREPARE PERSONS AS ASSISTANTS TO PROFESSIONAL FORESTERS. COURSE OBJECTIVES INCLUDE PREPARING TRAINEES TO -- (1) ASSIST FORESTERS, (2) CONDUCT SURVEYS, (3) PERFORM CONSERVATION FUNCTIONS, (4) MARK TIMBER FOR HARVEST,…

Timber management guide for shortleaf pine and oak-pine types in Missouri.

Treesearch

K.A. Brinkman; N.F. Rogers

1967-01-01

Summarizes recommended management practices for the shortleaf pine and oak-pine types in Missouri. Describes sites and soils, and silvical characteristics of pine; discusses rotations, cutting cycles, stocking levels, growing space requirements, and regeneration techniques; and prescribes treatments for stands with specified characteristics to maximize returns from...

A computational fluid dynamics modeling study of guide walls for downstream fish passage

USGS Publications Warehouse

Mulligan, Kevin; Towler, Brett; Haro, Alexander J.; Ahlfeld, David P.

2017-01-01

A partial-depth, impermeable guidance structure (or guide wall) for downstream fish passage is typically constructed as a series of panels attached to a floating boom and anchored across a water body (e.g. river channel, reservoir, or power canal). The downstream terminus of the wall is generally located nearby to a fish bypass structure. If guidance is successful, the fish will avoid entrainment in a dangerous intake structure (i.e. turbine intakes) while passing from the headpond to the tailwater of a hydroelectric facility through a safer passage route (i.e. the bypass). The goal of this study is to determine the combination of guide wall design parameters that will most likely increase the chance of surface-oriented fish being successfully guided to the bypass. To evaluate the flow field immediately upstream of a guide wall, a parameterized computational fluid dynamics model of an idealized power canal was constructed in © ANSYS Fluent v 14.5 (ANSYS Inc., 2012). The design parameters investigated were the angle and depth of the guide wall and the average approach velocity in the power canal. Results call attention to the importance of the downward to sweeping flow ratio and demonstrate how a change in guide wall depth and angle can affect this important hydraulic cue to out-migrating fish. The key findings indicate that a guide wall set at a small angle (15° is the minimum in this study) and deep enough such that sweeping flow dominant conditions prevail within the expected vertical distribution of fish approaching the structure will produce hydraulic conditions that are more likely to result in effective passage.

Monitoring of live and woody elements

NASA Astrophysics Data System (ADS)

Guastini, Enrico; Preti, Federico

2013-04-01

This study deals with surveys operated on crib walls in Casentino and Versilia (Tuscany), where Salix alba cuttings did not develop as expected from literature data. After more then 10 years since realization and and an initial very high survival rate, a few plants are yet alive among those put in place and the root strengthening is localized in the first 0.30 m just below the structure front face, while at further depth the detected root area ratio (R.A.R.) does not determine a noticeable increase in soil cohesion (Guastini et al., 2012). Mortality curve in willow cuttings is comparable with growing curve in Alnus nigra plants born in front of the structure, due to shading as failing cause. Assessing quantitatively the residual strength of the timber elements and estimating their possible duration allow comparison with the time needed for a complete stabilisation of the para-natural succession. The two spans of time must be almost similar to avoid unexpected collapse of the frame or unacceptable costs for oversized structures. Since the realization of a new live crib-wall in Casentino we sampled Alnus and Salix cuttings to compare rooting, survivability and evolution in randomized block design. Tests with Resistograph carried out on timber elements gives a good relationship between test results and density; through the non-destructive test it is possible to differentiate portions of wood with a noticeable residual strength from the decayed parts without any more load bearing capacity. MOR value (flexural strength) of timber elements has been estimated on the basis of the effective section verified by the Resistograph (Guastini et al., 2012), and then confirmed through rupture in bending of the same elements (Wood Technology DEISTAF lab), by proving the non-destructive test utility.

Effect of using guide walls and piers with different geometries on the flow at entrance of a spillway

NASA Astrophysics Data System (ADS)

Jahani, Matin; Sarkardeh, Hamed; Jabbari, Ebrahim

2018-03-01

In the present paper, the effect of guide wall and pier geometry on the flow pattern of a dam spillway was studied. Different scenarios were numerically simulated to optimize the geometry of the guide walls and piers of the spillway in different hydraulic conditions. The RNG and VOF models were used for turbulence and free surface simulations, respectively. Numerical results were validated with experimental data and good agreement was found with an average relative deviation of less than 10%. Results showed that the vertical inclination of the guide wall and pier was the main affecting factor in the approach flow condition through the spillway. A 44% increase in the vertical inclination of the guide wall resulted in a 43% reduction of the turbulence factor and in a 13% increment of the discharge coefficient of the spillway. By increasing the vertical inclination of the piers of the spillway by 28%, the flow behaviour becomes more uniform and the discharge coefficient increases by as much as 11%. Moreover, the results indicate that increasing the straight length of the guide wall leads to a reduction of the depth-averaged velocity and of the turbulence energy in the approach channel.

Improved grading system for structural logs for log homes

Treesearch

D.W. Green; T.M. Gorman; J.W. Evans; J.F. Murphy

2004-01-01

Current grading standards for logs used in log home construction use visual criteria to sort logs into either “wall logs” or structural logs (round and sawn round timbers). The conservative nature of this grading system, and the grouping of stronger and weaker species for marketing purposes, probably results in the specification of logs with larger diameter than would...

4. DETAIL: Crib supporting bay, east of west (or upper) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. DETAIL: Crib supporting bay, east of west (or upper) gate, looking south from inside lock. Tenon of crib timber is quite visible since the inner wall 2' planking has been burned off. Spikes holding remaining planks are discernable. - Wabash & Erie Canal, Lock No. 2, 8 miles east of Fort Wayne, adjacent to U.S. Route 24, New Haven, Allen County, IN

Virtual wall-based haptic-guided teleoperated surgical robotic system for single-port brain tumor removal surgery.

PubMed

Seung, Sungmin; Choi, Hongseok; Jang, Jongseong; Kim, Young Soo; Park, Jong-Oh; Park, Sukho; Ko, Seong Young

2017-01-01

This article presents a haptic-guided teleoperation for a tumor removal surgical robotic system, so-called a SIROMAN system. The system was developed in our previous work to make it possible to access tumor tissue, even those that seat deeply inside the brain, and to remove the tissue with full maneuverability. For a safe and accurate operation to remove only tumor tissue completely while minimizing damage to the normal tissue, a virtual wall-based haptic guidance together with a medical image-guided control is proposed and developed. The virtual wall is extracted from preoperative medical images, and the robot is controlled to restrict its motion within the virtual wall using haptic feedback. Coordinate transformation between sub-systems, a collision detection algorithm, and a haptic-guided teleoperation using a virtual wall are described in the context of using SIROMAN. A series of experiments using a simplified virtual wall are performed to evaluate the performance of virtual wall-based haptic-guided teleoperation. With haptic guidance, the accuracy of the robotic manipulator's trajectory is improved by 57% compared to one without. The tissue removal performance is also improved by 21% ( p < 0.05). The experiments show that virtual wall-based haptic guidance provides safer and more accurate tissue removal for single-port brain surgery.

Railing systems for use on timber deck bridges

Treesearch

Ronald K. Faller; Michael A. Ritter; Barry T. Rosson; Sheila R. Duwadi

1999-01-01

Bridge railing systems in the United States have historically been designed based on static load criteria given in the AASHTO Standard Specifications for Highway Bridges. In the past decade, full-scale vehicle crash testing has been recognized as a more appropriate and reliable method of evaluating bridge railing acceptability. In 1989. AASHTO published the Guide...

Silviculture for the 21st century--objective and subjective standards to guide successful practice

Treesearch

James M. Guldin; Russell T. Graham

2007-01-01

Silviculture is increasingly being applied in ways that go beyond traditional timber management objectives. Across the National Forest System, on other public lands, and increasingly on private lands as well, foresters are working with professional colleagues and landowners to develop innovative silvicultural prescriptions designed to meet diverse resource management...

Visual management system and timber management application

Treesearch

Warren R. Bacon; Asa D. (Bud) Twombly

1979-01-01

This paper includes an illustration of a planning process to guide vegetation management throughout a travel route seen area and over the time period of a total management rotation (100-300 years). The process will produce direction on visual characteristics to be created and maintained within the biological potential and coordinated with associated re-source...

Construction Guide to Next-Generation High-Performance Walls in Climate Zones 3-5 - Part 1: 2x6 Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kochkin, V.; Wiehagen, J.

2017-08-31

Part 1 of this Construction Guide to High-Performance Walls in Climate Zones 3-5 provides time-proven, practical, and cost-effective strategies for constructing durable, energy-efficient walls. It addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) exterior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories high.

Construction Guide to Next-Generation High-Performance Walls in Climate Zones 3-5 - Part 1: 2x6 Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kochkin, V.; Wiehagen, J.

Part 1 of this Construction Guide to High-Performance Walls in Climate Zones 3-5 provides time-proven, practical, and cost-effective strategies for constructing durable, energy-efficient walls. It addresses walls constructed with 2x6 wood frame studs, wood structural panel (WSP) exterior sheathing, and a cladding system installed over WSP sheathing in low-rise residential buildings up to three stories high.

Guide to wildlife tree management in New England northern hardwoods

Treesearch

Carl H. Tubbs; Richard M. DeGraaf; Mariko Yamasaki; William M. Healy

1987-01-01

Presents information on the culture and management of trees that have value as components of wildlife habitat in the northern hardwood and associated types in New England. Background information is provided for choosing the most suitable trees for wildlife habitats and for estimat ing the impact of timber production. Suggestions are made for choosing the numbers of...

Guide to the Blacks Mountain Experimental Forest - A sustained yield experiment in ponderosa pine in northeastern California

Treesearch

E.I. Kotok

1938-01-01

Experimental forests, watersheds, and ranges are the field laboratories in the research structure of the Forest Service. The California Forest and Range Experiment Station maintains four experimental forests representing the more important timber types in the Pine Region.The Blacks Mountain Experimental Forest represents the ponderosa pine...

Management of eastern hemlock for deer wintering areas

Treesearch

Russell S. Reay

2000-01-01

Hemlock stands provide superior winter cover for white-tailed deer. When a site is suitable for the support of a hemlock community, a decision to undertake active management is appropriate, however the difficulty of securing adequate hemlock regeneration must guide and govern the timber management plan. The need to maintain deer wintering areas creates some limitations...

Numerical analysis of behaviour of cross laminated timber (CLT) in blast loading

NASA Astrophysics Data System (ADS)

Šliseris, J.; Gaile, L.; Pakrastiņš, L.

2017-10-01

A non-linear computation model for CLT wall element that includes explicit dynamics and composite damage constitutive model was developed. The numerical model was compared with classical beam theory and it turned out that shear wood layer has significant shear deformations that must be taken into account when designing CLT. It turned out that impulse duration time has a major effect on the strength of CLT. Special attention must be payed when designing CLT wall, window and door architectural system in order to guarantee the robustness of structure. The proposed numerical modelling framework can be used when designing CLT buildings that can be affected by blast loading, whilst structural robustness must be guaranteed.

Documenting Biogeographical Patterns of African Timber Species Using Herbarium Records: A Conservation Perspective Based on Native Trees from Angola

PubMed Central

Romeiras, Maria M.; Figueira, Rui; Duarte, Maria Cristina; Beja, Pedro; Darbyshire, Iain

2014-01-01

In many tropical regions the development of informed conservation strategies is hindered by a dearth of biodiversity information. Biological collections can help to overcome this problem, by providing baseline information to guide research and conservation efforts. This study focuses on the timber trees of Angola, combining herbarium (2670 records) and bibliographic data to identify the main timber species, document biogeographic patterns and identify conservation priorities. The study recognized 18 key species, most of which are threatened or near-threatened globally, or lack formal conservation assessments. Biogeographical analysis reveals three groups of species associated with the enclave of Cabinda and northwest Angola, which occur primarily in Guineo-Congolian rainforests, and evergreen forests and woodlands. The fourth group is widespread across the country, and is mostly associated with dry forests. There is little correspondence between the spatial pattern of species groups and the ecoregions adopted by WWF, suggesting that these may not provide an adequate basis for conservation planning for Angolan timber trees. Eight of the species evaluated should be given high conservation priority since they are of global conservation concern, they have very restricted distributions in Angola, their historical collection localities are largely outside protected areas and they may be under increasing logging pressure. High conservation priority was also attributed to another three species that have a large proportion of their global range concentrated in Angola and that occur in dry forests where deforestation rates are high. Our results suggest that timber tree species in Angola may be under increasing risk, thus calling for efforts to promote their conservation and sustainable exploitation. The study also highlights the importance of studying historic herbarium collections in poorly explored regions of the tropics, though new field surveys remain a priority to update historical information. PMID:25061858

Documenting biogeographical patterns of African timber species using herbarium records: a conservation perspective based on native trees from Angola.

PubMed

Romeiras, Maria M; Figueira, Rui; Duarte, Maria Cristina; Beja, Pedro; Darbyshire, Iain

2014-01-01

In many tropical regions the development of informed conservation strategies is hindered by a dearth of biodiversity information. Biological collections can help to overcome this problem, by providing baseline information to guide research and conservation efforts. This study focuses on the timber trees of Angola, combining herbarium (2670 records) and bibliographic data to identify the main timber species, document biogeographic patterns and identify conservation priorities. The study recognized 18 key species, most of which are threatened or near-threatened globally, or lack formal conservation assessments. Biogeographical analysis reveals three groups of species associated with the enclave of Cabinda and northwest Angola, which occur primarily in Guineo-Congolian rainforests, and evergreen forests and woodlands. The fourth group is widespread across the country, and is mostly associated with dry forests. There is little correspondence between the spatial pattern of species groups and the ecoregions adopted by WWF, suggesting that these may not provide an adequate basis for conservation planning for Angolan timber trees. Eight of the species evaluated should be given high conservation priority since they are of global conservation concern, they have very restricted distributions in Angola, their historical collection localities are largely outside protected areas and they may be under increasing logging pressure. High conservation priority was also attributed to another three species that have a large proportion of their global range concentrated in Angola and that occur in dry forests where deforestation rates are high. Our results suggest that timber tree species in Angola may be under increasing risk, thus calling for efforts to promote their conservation and sustainable exploitation. The study also highlights the importance of studying historic herbarium collections in poorly explored regions of the tropics, though new field surveys remain a priority to update historical information.

A Dissipative Connector for CLT Buildings: Concept, Design and Testing

PubMed Central

Scotta, Roberto; Marchi, Luca; Trutalli, Davide; Pozza, Luca

2016-01-01

This paper deals with the conception and characterization of an innovative connection for cross-laminated timber (CLT) panels. The connection is designed to provide an adequate level of dissipative capacity to CLT structures also when realized with large horizontal panels and therefore prone to fragile shear sliding failure. The connector, named X-bracket, has been theorized and designed by means of numerical parametric analyses. Furthermore, its cyclic behavior has been verified with experimental tests and compared to that of traditional connectors. Numerical simulations of cyclic tests of different CLT walls anchored to the foundation with X-brackets were also performed to assess their improved seismic performances. Finally, the analysis of the response of a 6 m × 3 m squat wall demonstrates that the developed connection provides good ductility and dissipation capacities also to shear walls realized with a single CLT panel. PMID:28773265

A Dissipative Connector for CLT Buildings: Concept, Design and Testing.

PubMed

Scotta, Roberto; Marchi, Luca; Trutalli, Davide; Pozza, Luca

2016-02-26

This paper deals with the conception and characterization of an innovative connection for cross-laminated timber (CLT) panels. The connection is designed to provide an adequate level of dissipative capacity to CLT structures also when realized with large horizontal panels and therefore prone to fragile shear sliding failure. The connector, named X-bracket, has been theorized and designed by means of numerical parametric analyses. Furthermore, its cyclic behavior has been verified with experimental tests and compared to that of traditional connectors. Numerical simulations of cyclic tests of different CLT walls anchored to the foundation with X-brackets were also performed to assess their improved seismic performances. Finally, the analysis of the response of a 6 m × 3 m squat wall demonstrates that the developed connection provides good ductility and dissipation capacities also to shear walls realized with a single CLT panel.

An analysis of production and costs in high-lead yarding.

Treesearch

Magnus E. Tennas; Robert H. Ruth; Carl M. Berntsen

1955-01-01

In recent years loggers and timber owners have needed better information for estimating logging costs in the Douglas-fir region. Brandstrom's comprehensive study, published in 1933 (1), has long been used as a guide in making cost estimates. But the use of new equipment and techniques and an overall increase in logging costs have made it increasingly difficult to...

Regeneration of Douglas-fir in the Klamath Mountains region, California and Oregon

Treesearch

R. O. Strothmann; Douglass F. Roy

1984-01-01

Information on the regeneration of Douglas-fir, one of the most valuable timber species in the United States, is summarized, from seed production to care of young stands. General recommendations are given to guide the practitioner. Seed production can be increased by applying fertilizer and by stem girdling. To prepare sites for planting, mechanical, burning, chemical...

A Guide to nonnative invasive plants inventoried in the north by Forest Inventory and Analysis

Treesearch

Cassandra Olson; Anita F. Cholewa

2009-01-01

The Forest Inventory and Analysis (FIA) program of the U.S. Forest Service is an ongoing endeavor mandated by Congress to determine the extent, condition, volume, growth, and depletions of timber on the Nation's forest land. FIA has responded to a growing demand for other information about our forests including, but not limited to,...

Landscape management using historical fire regimes: Blue River, Oregon.

Treesearch

J.H. Cissel; F.J. Swanson; P.J. Weisberg

1999-01-01

Landscapes administered for timber production by the U.S. Forest Service in the Pacific Northwest in the 1950s-1980s were managed with dispersed patch clearcutting, and then briefly in the late 1980s with aggregated patch clearcutting. In the late 1990s, use of historical landscape patterns and disturbance regimes as a guide for landscape management has emerged as an...

Users guide for STHARVEST: software to estimate the cost of harvesting small timber.

Treesearch

Roger D. Fight; Xiaoshan Zhang; Bruce R. Hartsough

2003-01-01

The STHARVEST computer application is Windows-based, public-domain software used to estimate costs for harvesting small-diameter stands or the small-diameter component of a mixed-sized stand. The equipment production rates were developed from existing studies. Equipment operating cost rates were based on November 1998 prices for new equipment and wage rates for the...

Southern forest resource assessment: Conducting science in the public eye

Treesearch

John G. Greis; David N. Wear

2002-01-01

Questions about the long-term sustainability of southern forest benefits, including wildlife habitat, water quality, and timber supply, prompted this regional assessment and guided the process by which it was conducted. SFRA’s final report is descriptive—not prescriptive—and is intended to inform debate and policymaking in technically defensible, unbiased, and...

Plant cell walls throughout evolution: towards a molecular understanding of their design principles.

PubMed

Sarkar, Purbasha; Bosneaga, Elena; Auer, Manfred

2009-01-01

Throughout their life, plants typically remain in one location utilizing sunlight for the synthesis of carbohydrates, which serve as their sole source of energy as well as building blocks of a protective extracellular matrix, called the cell wall. During the course of evolution, plants have repeatedly adapted to their respective niche, which is reflected in the changes of their body plan and the specific design of cell walls. Cell walls not only changed throughout evolution but also are constantly remodelled and reconstructed during the development of an individual plant, and in response to environmental stress or pathogen attacks. Carbohydrate-rich cell walls display complex designs, which together with the presence of phenolic polymers constitutes a barrier for microbes, fungi, and animals. Throughout evolution microbes have co-evolved strategies for efficient breakdown of cell walls. Our current understanding of cell walls and their evolutionary changes are limited as our knowledge is mainly derived from biochemical and genetic studies, complemented by a few targeted yet very informative imaging studies. Comprehensive plant cell wall models will aid in the re-design of plant cell walls for the purpose of commercially viable lignocellulosic biofuel production as well as for the timber, textile, and paper industries. Such knowledge will also be of great interest in the context of agriculture and to plant biologists in general. It is expected that detailed plant cell wall models will require integrated correlative multimodal, multiscale imaging and modelling approaches, which are currently underway.

A strategy for nontimber forest products research and technology transfer for southern United States

Treesearch

James L. Chamberlain

2003-01-01

In mid-2001, the Southern Research Station (SRS) and the Southern Regional Office (R8) of the U.S. Forest Service worked through a 3-day facilitated discussion to develop a strategy to guide research and technology transfer on non-timber forest products (NTFPs). In all, more than 14 specialists took part in developing the strategy, representing the Forest Service...

Interior view, looking up toward project west at the heavy ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior view, looking up toward project west at the heavy timber joists and center beam supporting the wood water tank. Note the iron compression bands around the perimeter of the tank. Note also the iron (steel?) water fill pipe for the tank, bent to fit between the joists and the tank wall. - East Broad Top Railroad & Company, Water Tank at Coles Station, East Broad Top Railroad & Company (at Milepost 24.3), 0.5 miles east of Coles Valley Road, Saltillo, Huntingdon County, PA

Retrofitted green roofs and walls and improvements in thermal comfort

NASA Astrophysics Data System (ADS)

Feitosa, Renato Castiglia; Wilkinson, Sara

2017-06-01

Increased urbanization has led to a worsening in the quality of life for many people living in large cities in respect of the urban heat island effect and increases of indoor temperatures in housing and other buildings. A solution may be to retrofit existing environments to their former conditions, with a combination of green infrastructures applied to existing walls and rooftops. Retrofitted green roofs may attenuate housing temperature. However, with tall buildings, facade areas are much larger compared to rooftop areas, the role of green walls in mitigating extreme temperatures is more pronounced. Thus, the combination of green roofs and green walls is expected to promote a better thermal performance in the building envelope. For this purpose, a modular vegetated system is adopted for covering both walls and rooftops. Rather than temperature itself, the heat index, which comprises the combined effect of temperature and relative humidity is used in the evaluation of thermal comfort in small scale experiments performed in Sydney - Australia, where identical timber framed structures prototypes (vegetated and non-vegetated) are compared. The results have shown a different understanding of thermal comfort improvement regarding heat index rather than temperature itself. The combination of green roof and walls has a valid role to play in heat index attenuation.

Plant cell walls throughout evolution: towards a molecular understanding of their design principles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sarkar, Purbasha; Bosneaga, Elena; Auer, Manfred

Throughout their life, plants typically remain in one location utilizing sunlight for the synthesis of carbohydrates, which serve as their sole source of energy as well as building blocks of a protective extracellular matrix, called the cell wall. During the course of evolution, plants have repeatedly adapted to their respective niche,which is reflected in the changes of their body plan and the specific design of cell walls. Cell walls not only changed throughout evolution but also are constantly remodelled and reconstructed during the development of an individual plant, and in response to environmental stress or pathogen attacks. Carbohydrate-rich cell wallsmore » display complex designs, which together with the presence of phenolic polymers constitutes a barrier for microbes, fungi, and animals. Throughout evolution microbes have co-evolved strategies for efficient breakdown of cell walls. Our current understanding of cell walls and their evolutionary changes are limited as our knowledge is mainly derived from biochemical and genetic studies, complemented by a few targeted yet very informative imaging studies. Comprehensive plant cell wall models will aid in the re-design of plant cell walls for the purpose of commercially viable lignocellulosic biofuel production as well as for the timber, textile, and paper industries. Such knowledge will also be of great interest in the context of agriculture and to plant biologists in general. It is expected that detailed plant cell wall models will require integrated correlative multimodal, multiscale imaging and modelling approaches, which are currently underway.« less

Light Steel-Timber Frame with Composite and Plaster Bracing Panels

PubMed Central

Scotta, Roberto; Trutalli, Davide; Fiorin, Laura; Pozza, Luca; Marchi, Luca; De Stefani, Lorenzo

2015-01-01

The proposed light-frame structure comprises steel columns for vertical loads and an innovative bracing system to efficiently resist seismic actions. This seismic force resisting system consists of a light timber frame braced with an Oriented Strand Board (OSB) sheet and an external technoprene plaster-infilled slab. Steel brackets are used as foundation and floor connections. Experimental cyclic-loading tests were conduced to study the seismic response of two shear-wall specimens. A numerical model was calibrated on experimental results and the dynamic non-linear behavior of a case-study building was assessed. Numerical results were then used to estimate the proper behavior factor value, according to European seismic codes. Obtained results demonstrate that this innovative system is suitable for the use in seismic-prone areas thanks to the high ductility and dissipative capacity achieved by the bracing system. This favorable behavior is mainly due to the fasteners and materials used and to the correct application of the capacity design approach. PMID:28793642

Light Steel-Timber Frame with Composite and Plaster Bracing Panels.

PubMed

Scotta, Roberto; Trutalli, Davide; Fiorin, Laura; Pozza, Luca; Marchi, Luca; De Stefani, Lorenzo

2015-11-03

The proposed light-frame structure comprises steel columns for vertical loads and an innovative bracing system to efficiently resist seismic actions. This seismic force resisting system consists of a light timber frame braced with an Oriented Strand Board (OSB) sheet and an external technoprene plaster-infilled slab. Steel brackets are used as foundation and floor connections. Experimental cyclic-loading tests were conduced to study the seismic response of two shear-wall specimens. A numerical model was calibrated on experimental results and the dynamic non-linear behavior of a case-study building was assessed. Numerical results were then used to estimate the proper behavior factor value, according to European seismic codes. Obtained results demonstrate that this innovative system is suitable for the use in seismic-prone areas thanks to the high ductility and dissipative capacity achieved by the bracing system. This favorable behavior is mainly due to the fasteners and materials used and to the correct application of the capacity design approach.

9. EAST ELEVATION OF SKIDOO MILL, LOOKING WEST. THE LEVELS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. EAST ELEVATION OF SKIDOO MILL, LOOKING WEST. THE LEVELS OF THE MILL CAN BE CLEARLY SEEN HERE. THE UPPER MOST LEVEL CONSISTS OF A CONVEORY THAT BROUGHT ORE TO A JAW CRUSHER. THE CRUSHED ORE WAS CHANNELED DIRECTLY INTO A LARGE ORE BIN LOCATED BEHIND THE COVERED WALL (CENTER). THE NEXT LEVEL SHOWS THE BULL (DRIVE) WHEEL ON THE UPPER PART OF THE STAMP BATTERIES. THE NEXT LEVEL DOWN (STAIRS) IS THE LOWER PORTION OF THE STAMP BATTERIES WITH THE MORTAR BLOCKS AND APRONS. THE NEXT LEVEL DOWN (LOWER RIGHT) HELD CONCENTRATION (SHAKING) TABLES AND A CLASSIFIER. MOST EXTERIOR WALL COVERING, TIMBERS, AND ROOF IS MISSING FROM THE MILL. SEE CA-290-42 (CT) FOR IDENTICAL COLOR TRANSPARENCY - Skidoo Mine, Park Route 38 (Skidoo Road), Death Valley Junction, Inyo County, CA

42. EAST ELEVATION OF SKIDOO MILL, LOOKING WEST. THE LEVELS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

42. EAST ELEVATION OF SKIDOO MILL, LOOKING WEST. THE LEVELS OF THE MILL CAN BE CLEARLY SEEN HERE. THE UPPER MOST LEVEL CONSISTS OF A CONVEORY THAT BROUGHT ORE TO A JAW CRUSHER. THE CRUSHED ORE WAS CHANNELED DIRECTLY INTO A LARGE ORE BIN LOCATED BEHIND THE COVERED WALL (CENTER). THE NEXT LEVEL SHOWS THE BULL (DRIVE) WHEEL ON THE UPPER PART OF THE STAMP BATTERIES THE NEXT LEVEL DOWN (STAIRS) IS THE LOWER PORTION OF THE STAMP BATTERIES WITH MORTAR BLOCKS AND APRONS. THE NEXT LEVEL DOWN (LOWER RIGHT) HELD CONCENTRATION (SHAKING) TABLES AND A CLASSIFIER. MOST EXTERIOR WALL COVERING, TIMBERS, AND ROOF IS MISSING FROM THE MILL. SEE CA-290-9 FOR IDENTICAL B&W NEGATIVE. - Skidoo Mine, Park Route 38 (Skidoo Road), Death Valley Junction, Inyo County, CA

Establishing Longleaf Pine Seedlings Under a Loblolly Pine Canopy (User’s Guide)

DTIC Science & Technology

2017-02-01

converting loblolly pine stands to longleaf pine dominance ..................... 5 3. WHERE DO THE GUIDELINES APPLY? GEOGRAPHIC, EDAPHIC, AND STAND STRUCTURE ...watching, hunting, and off-road vehicle use, and yield valuable products including quality saw- timber and pine needles for landscaping. Longleaf pines...U.S. Fish and Wildlife Service 2003). The foraging habitat guidelines specify characteristics of the pine canopy structure , the abundance of

What people value: an ecosystem services approach to managing public lands

Treesearch

Marie Oliver; Robert Deal; Nikola Smith; Dale Blahna; Jeff Kline

2016-01-01

Since 1960, the Forest Service has been guided by the multiple-use concept, which recognizes five major uses for public lands—timber, water, range, recreation, and fish and wildlife habitat—and mandates that all five should be equally considered in management plans. In recent decades, however, it has become evident that people also value many other benefits offered by...

Guide to investment and trade in the forest-product sectors of Southeast Asia: Indonesia, Malaysia, and the Philippines. Working paper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krutilia, K.

1988-01-01

Declining timber resources, an increase in value-added wood-base processing, new export markets, and a growing stress on joint ventures have been key factors in the rapid evolution since 1975 of Southeast Asia's forest products industry. The report profiles the industry and its prospects in Indonesia, the Philippines, and Malaysia, each of which differs with respect to stage of wood-industry development and investment climate. The countries' forest management policies, timber resources, and the status of their wood-based processing industries are reviewed first, followed by an overview of the business environment in each country, the latter covering policies toward foreign investment (includingmore » the increasingly important investments from other less-developed countries), investment licensing and regulation, taxation, exporting/importing regulations, and policies governing currency and capital controls. Includes a 5-page list of references and a short annotated bibliography.« less

Thermal Transmittance and the Embodied Energy of Timber Frame Lightweight Walls Insulated with Straw and Reed

NASA Astrophysics Data System (ADS)

Miljan, M.; Miljan, J.

2015-11-01

Sustainable energy use has become topical in the whole world. Energy gives us comfort we are used to. EU and national regulations determine energy efficiency of the buildings. This is one side of the problem - energy efficiency of houses during exploitation. But the other side is primary energy content of used materials and more rational use of resources during the whole life cycle of a building. The latter value constitutes about 8 - 20% from the whole energy content. Calculations of energy efficiency of materials lead us to energy efficiency of insulation materials and to comparison of natural and industrial materials taking into account their thermal conductivity as well as their primary energy content. Case study of the test house (built in 2012) insulated with straw bales gave the result that thermal transmittance of investigated straw bale walls was according to the minimum energy efficiency requirements set in Estonia U = 0.12 - 0.22 W/m2K (for walls).

Stemless ball valve

NASA Technical Reports Server (NTRS)

Burgess, Kevin (Inventor); Yakos, David (Inventor); Walthall, Bryan (Inventor)

2012-01-01

A stemless ball valve comprising: a right flange; left flange; ball with an axis pin and two travel pins; ball seal on either side of the ball; guide sleeve with inner walls comprising two channels; cartridge guide holder; inner magnetic cartridge; and outer magnetic cartridge. The ball is situated inside of the guide sleeve, and a travel pin is located in each of the two channels. The guide sleeve is situated inside of the cartridge guide holder, which is located adjacent to and outside of the inner magnetic cartridge and secured to the inner magnetic cartridge such that when the inner magnetic cartridge rotates, the cartridge guide holder also rotates. The cartridge guide holder is secured to the guide sleeve such that when the cartridge guide holder rotates, the travel pins move within the channels in the inner walls of the guide sleeve, thereby causing the ball to rotate.

Forest disturbances, deforestation and timber harvest patterns in the Conterminous United States

NASA Astrophysics Data System (ADS)

Boschetti, L.; Huo, L. Z.

2016-12-01

Current estimates of carbon-equivalent emissions report the contribution of deforestation as 12% of total anthropogenic carbon emissions (van der Werf et al., 2009), but accurate monitoring of forest carbon balance should discriminate between land use change related to forest natural disturbances, forest management and deforestation. The total change in forest cover (Gross Forest Cover Loss, GFCL) needs to be characterized based on the cause (natural/human) and on the outcome of the change (regeneration to forest/transition to non-forest)(Kurtz et al, 2010). We developed a multitemporal, object-oriented methodology to classify GFCL as either (a) deforestation, (b) fire and insect disturbances (c) forest management practices. The Landsat-derived University of Maryland Global Forest Change product (Hansen, 2013) is used to identify all the areas forest cover loss: those areas are subsequently converted to objects, and used to extract temporal profiles of spectral reflectances and spectral indices from the Landsat WELD dataset. Finally, the temporal profiles and descriptive parameters of shapes, textures, and spatial relationships of the objects are used in a rule-based classifier to identify the type of disturbance. To pathfind a global disturbance type classification, the methods are demonstrated by wall-to-wall classification of the forest cover loss in the conterminous United States for the 2002-2011 period. The results show that deforestation accounts for a small percentage (approximately 2%) of the GFCL in the CONUS, and are in agreement with the known patterns of logging activity, fire and insect damage. The time series of timber harvest clearcut is also in agreement with the national timber extraction statistics, showing reduced harvesting following the 2008 economic crisis. The results also highlight the different management practices on private and public lands: 36% of the US forests are publicly owned (federal, state and local institutions) but account only for 12% of the clearcuts, whereas private lands (64% of the total) account for 88% of the clearcut area. Conversely, stand replacing fire and insect disturbances affect primarily public lands (85% versus 15% on private lands).

[Hydrodynamic effects of the oxidation ditch on the removal efficiency and energy consumption].

PubMed

Liu, Guang-Li; Chong, Yun-Xiao; Fan, Qing-Juan; Jia, Xiao-Shan; Li, Shou-Hui

2006-11-01

The hydrodynamic characteristics in the oxidation ditch have great effects on the distributions of the dissolved oxygen and the velocity gradient, and then make important effects on the removal efficiency and energy consumption. The single-ditch Passver oxidation ditch with the capacity of 500 m3/d was investigated. The measurement and computer simulation were carried out on the velocity gradient and degrees, 180 degrees, respectively, which lied on the corner of the downriver of the aerator. The local energy consumption could be decreased by 10% after the guided wall with 180 degrees opening angle was installed. Under the condition that the velocity of the aerator was 72 r/min, the installation of the 180 degrees guided wall could not effect the distribution of DO concentration. According to the operation results of treating the municipal wastewater with low concentration, the IAWPRC model was used to simulate the water qualities in the oxidation ditch with the 180 degrees guided wall or not, respectively. The simulation results showed that the water qualities in the effluent didn't change a lot after the 180 degrees guided wall installed.

National measures of forest productivity for timber

Treesearch

Peter J. Ince; H. Edward Dickerhoof; H. Fred Kaiser

1989-01-01

This report presents national measures of forest productivity for timber. These measures reveal trends in the relationship between quantity of timber produced by forests and the quantity of forest resources employed in timber production. Timber production is measured by net annual growth of timber and annual timber removals. Measures of timber productivity include...

Timber value—a matter of choice: a study of how end use assumptions affect timber values.

Treesearch

John H. Beuter

1971-01-01

The relationship between estimated timber values and actual timber prices is discussed. Timber values are related to how, where, and when the timber is used. An analysis demonstrates the relative values of a typical Douglas-fir stand under assumptions about timber use.

Build an Interactive Word Wall

ERIC Educational Resources Information Center

Jackson, Julie

2018-01-01

Word walls visually display important vocabulary covered during class. Although teachers have often been encouraged to post word walls in their classrooms, little information is available to guide them. This article describes steps science teachers can follow to transform traditional word walls into interactive teaching tools. It also describes a…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zohar, S.; Choi, Y.; Love, D. M.

We use X-ray Excited Luminescence Microscopy to investigate the elemental and layer resolved magnetic reversal in an interlayer exchange coupled (IEC) epitaxial Fe/Cr wedge/Co heterostructure. The transition from strongly coupled parallel Co-Fe reversal for Cr thickness t(Cr) < 0.34 nm to weakly coupled layer independent reversal for t(Cr) > 1.5 nm is punctuated at 0.34 < t(Cr) < 1.5 nm by a combination of IEC guided domain wall motion and stationary zig zag domain walls. Domain walls nucleated at switching field minima are guided by IEC spatial gradients and collapse at switching field maxima.

Application of dynamic slip wall modeling to a turbine nozzle guide vane

NASA Astrophysics Data System (ADS)

Bose, Sanjeeb; Talnikar, Chaitanya; Blonigan, Patrick; Wang, Qiqi

2015-11-01

Resolution of near-wall turbulent structures is computational prohibitive necessitating the need for wall-modeled large-eddy simulation approaches. Standard wall models are often based on assumptions of equilibrium boundary layers, which do not necessarily account for the dissimilarity of the momentum and thermal boundary layers. We investigate the use of the dynamic slip wall boundary condition (Bose and Moin, 2014) for the prediction of surface heat transfer on a turbine nozzle guide vane (Arts and de Rouvroit, 1992). The heat transfer coefficient is well predicted by the slip wall model, including capturing the transition to turbulence. The sensitivity of the heat transfer coefficient to the incident turbulence intensity will additionally be discussed. Lastly, the behavior of the thermal and momentum slip lengths will be contrasted between regions where the strong Reynolds analogy is invalid (near transition on the suction side) and an isothermal, zero pressure gradient flat plate boundary layer (Wu and Moin, 2010).

Timber resources of the Sacramento area, California, 1972.

Treesearch

Brian R. Wall

1978-01-01

This report summarizes the 1972 timber resource inventory of the Sacramento area, California. Included are detailed tables of forest area, timber volume, growth, mortality, and timber cut and a discussion of the current timber resource and timber industry situation.

Corrosion monitoring using high-frequency guided waves

NASA Astrophysics Data System (ADS)

Fromme, P.

2016-04-01

Corrosion can develop due to adverse environmental conditions during the life cycle of a range of industrial structures, e.g., offshore oil platforms, ships, and desalination plants. Generalized corrosion leading to wall thickness loss can cause the reduction of the strength and thus degradation of the structural integrity. The monitoring of corrosion damage in difficult to access areas can be achieved using high frequency guided waves propagating along the structure from accessible areas. Using standard ultrasonic wedge transducers with single sided access to the structure, guided wave modes were selectively generated that penetrate through the complete thickness of the structure. The wave propagation and interference of the different guided wave modes depends on the thickness of the structure. Laboratory experiments were conducted for wall thickness reduction due to milling of the steel structure. From the measured signal changes due to the wave mode interference the reduced wall thickness was monitored. Good agreement with theoretical predictions was achieved. The high frequency guided waves have the potential for corrosion damage monitoring at critical and difficult to access locations from a stand-off distance.

Corrosion monitoring using high-frequency guided ultrasonic waves

NASA Astrophysics Data System (ADS)

Fromme, Paul

2014-02-01

Corrosion develops due to adverse environmental conditions during the life cycle of a range of industrial structures, e.g., offshore oil platforms, ships, and desalination plants. Both pitting corrosion and generalized corrosion leading to wall thickness loss can cause the degradation of the structural integrity. The nondestructive detection and monitoring of corrosion damage in difficult to access areas can be achieved using high frequency guided waves propagating along the structure from accessible areas. Using standard ultrasonic transducers with single sided access to the structure, guided wave modes were generated that penetrate through the complete thickness of the structure. The wave propagation and interference of the different guided wave modes depends on the thickness of the structure. Laboratory experiments were conducted and the wall thickness reduced by consecutive milling of the steel structure. Further measurements were conducted using accelerated corrosion in a salt water bath and the damage severity monitored. From the measured signal change due to the wave mode interference the wall thickness reduction was monitored. The high frequency guided waves have the potential for corrosion damage monitoring at critical and difficult to access locations from a stand-off distance.

Effect of pressurization on helical guided wave energy velocity in fluid-filled pipes.

PubMed

Dubuc, Brennan; Ebrahimkhanlou, Arvin; Salamone, Salvatore

2017-03-01

The effect of pressurization stresses on helical guided waves in a thin-walled fluid-filled pipe is studied by modeling leaky Lamb waves in a stressed plate bordered by fluid. Fluid pressurization produces hoop and longitudinal stresses in a thin-walled pipe, which corresponds to biaxial in-plane stress in a plate waveguide model. The effect of stress on guided wave propagation is accounted for through nonlinear elasticity and finite deformation theory. Emphasis is placed on the stress dependence of the energy velocity of the guided wave modes. For this purpose, an expression for the energy velocity of leaky Lamb waves in a stressed plate is derived. Theoretical results are presented for the mode, frequency, and directional dependent variations in energy velocity with respect to stress. An experimental setup is designed for measuring variations in helical wave energy velocity in a thin-walled water-filled steel pipe at different levels of pressure. Good agreement is achieved between the experimental variations in energy velocity for the helical guided waves and the theoretical leaky Lamb wave solutions. Copyright © 2016 Elsevier B.V. All rights reserved.

Radio-guided occult lesion localisation using iodine 125 Seeds “ROLLIS” to guide surgical removal of an impalpable posterior chest wall melanoma metastasis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dissanayake, Shashini; Dissanayake, Deepthi; Taylor, Donna B

Cancer screening and surveillance programmes and the use of sophisticated imaging tools such as positron emission tomography-computed tomography (PET-CT) have increased the detection of impalpable lesions requiring imaging guidance for excision. A new technique involves intra-lesional insertion of a low-activity iodine-125 ({sup 125}I) seed and detection of the radioactive signal in theatre using a hand-held gamma probe to guide surgery. Whilst several studies describe using this method to guide the removal of impalpable breast lesions, only a handful of publications report its use to guide excision of lesions outside the breast. We describe a case in which radio-guided occult lesionmore » localisation using an iodine 125 seed was used to guide excision of an impalpable posterior chest wall metastasis detected on PET-CT.« less

Use and production of solid sawn timbers in the United States

Treesearch

Gerry Jackson; James Howard; A. L. Hammett

2001-01-01

Although timber production has grown steadily over the last decade, information about the use of timbers and the corresponding resource remains in short supply. This study adds to the available literature on solid sawn timbers by compiling data on timber production and uses. The major categories of solid sawn timbers researched were railroad ties, timber bridges, and...

Mechanical behaviour of connections between CLT panels under monotonic and cyclic loading

NASA Astrophysics Data System (ADS)

Xiong, HB; Huynh, A.

2018-05-01

The experimental research presented in this paper investigates the mechanical behaviour of commercial metal connections in three-ply Chinese-manufactured cross-laminated timber (CLT) panels. Monotonic and cyclic loading tests were conducted at Tongji University on angle bracket and joints with inclined self-tapping screws. According to the standard EN 12512, the force-displacement curves are exploited to assess the mechanical properties of the connections such as the strength capacity, yielding point, ductility and equivalent damping ratios. From the test results, the main load-carrying direction of the angle bracket is shear direction but the connection exhibits more ductile and dissipative behaviour in tension direction. In general, screwed joints demonstrate relatively brittle behaviour except in the case of shear wall-to-wall connection. Based on the capacity-based design principles, the experimental results and the failure modes are discussed to propose some design suggestions.

Dynamic Echo Information Guides Flight in the Big Brown Bat

PubMed Central

Warnecke, Michaela; Lee, Wu-Jung; Krishnan, Anand; Moss, Cynthia F.

2016-01-01

Animals rely on sensory feedback from their environment to guide locomotion. For instance, visually guided animals use patterns of optic flow to control their velocity and to estimate their distance to objects (e.g., Srinivasan et al., 1991, 1996). In this study, we investigated how acoustic information guides locomotion of animals that use hearing as a primary sensory modality to orient and navigate in the dark, where visual information is unavailable. We studied flight and echolocation behaviors of big brown bats as they flew under infrared illumination through a corridor with walls constructed from a series of individual vertical wooden poles. The spacing between poles on opposite walls of the corridor was experimentally manipulated to create dense/sparse and balanced/imbalanced spatial structure. The bats’ flight trajectories and echolocation signals were recorded with high-speed infrared motion-capture cameras and ultrasound microphones, respectively. As bats flew through the corridor, successive biosonar emissions returned cascades of echoes from the walls of the corridor. The bats flew through the center of the corridor when the pole spacing on opposite walls was balanced and closer to the side with wider pole spacing when opposite walls had an imbalanced density. Moreover, bats produced shorter duration echolocation calls when they flew through corridors with smaller spacing between poles, suggesting that clutter density influences features of the bat’s sonar signals. Flight speed and echolocation call rate did not, however, vary with dense and sparse spacing between the poles forming the corridor walls. Overall, these data demonstrate that bats adapt their flight and echolocation behavior dynamically when flying through acoustically complex environments. PMID:27199690

Effects of site preparation on timber and non-timber values of loblolly pine plantations

Treesearch

Jianbang Gan; Stephen H. Kolison; James H. Miller; Tasha M. Hargrove

1998-01-01

This study evaluated the timber and non-timber values of the forest stands generated by four site preparation methods tested in the Tuskegee National Forest 15 yr earlier. The timber values of the forest stands were assessed with the timber yields predicted by the SE TWIGS model. Non-timber benefits were evaluated through the Contingent Valuation Method. Two hundred...

Sprouting angiogenesis in human midterm uterus and fallopian tube is guided by endothelial tip cells.

PubMed

Rusu, M C; Motoc, A G M; Pop, F; Folescu, R

2013-01-01

Five samples of human midterm fetal uterus and fallopian tube (four donor bodies) were used to assess whether or not processes of angiogenesis are guided by endothelial tip cells (ETCs), and if cytokine-receptors, such as CD117/c-kit and PDGFR-α, are expressed in the microenvironment of the endothelial tubes. CD34 labeled microvessels in the uterine wall (myometrium and endometrium) and in the wall of the uterine (fallopian) tube, and accurately identified ETCs in both organs. We conclude that sprouting angiogenesis in the developing human female tract is guided by ETCs. Moreover, CD117/c-kit antibodies labeled mural networks of pericytes, α-SMA-positive and desmin-negative, related to the endometrial (but not myometrial) microvessels, and similar labeling was identified in the wall of the uterine tube. PDGFR-α positive labeling, stromal and pericytary, was also found. Thus, sprouting angiogenesis in human fetal genital organs appears to be guided by tip cells and is influenced by tyrosine kinase receptor signaling.

36 CFR 223.61 - Establishing minimum stumpage rates.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Appraisal and Pricing.... No timber may be sold or cut under timber sale contracts for less than minimum stumpage rates except... amounts of material not meeting utilization standards of the timber sale contract. For any timber sale...

Deriving simple and adjusted financial rates of return on Mississippi timber lands by combining forest inventory and analysis and Timber Mart-South data

Treesearch

Andrew J. Hartsell

2007-01-01

This study compares returns on investments in Mississippi timber lands with returns on alternative investments. The real annual rates of return from mature, undisturbed timber lands in Mississippi over a 17-year period (1977-94) were computed. Southern Research Station Forest Inventory and Analysis (FIA) timber volume data and Timber Mart-South (TMS) data on timber...

Global sustainable timber supply and demand

Treesearch

Peter J. Ince

2010-01-01

Industrial timber use has provided timber revenue that has helped make timber supply and demand more sustainable in the leading timber producing regions of the world. Sustainable development implies not consuming more resources today than we can replace tomorrow, but sustainable forest management implies more than merely a non-declining supply of timber. Forests as a...

The 1993 RPA timber assessment update

Treesearch

Richard W. Haynes; Darius M. Adams; John R. Mills

1995-01-01

This update reports changes in the Nation's timber resource since the 1989 RPA timber assessment. The timber resource situation is analyzed to provide projections for future cost and availability of timber products to meet demands. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These include changes...

An analysis of the timber situation in Alaska: 1970-2010.

Treesearch

Richard W. Haynes; David J. Brooks

1990-01-01

Current conditions in Alaska timber markets are reviewed relative to the past two decades. Major issues in the outlook for Alaska timber markets are considered. Recent studies are used to develop projections of Alaska timber products output, timber harvest, and timber harvest by owner. The assumptions these projections depend on include the level of harvest on Native...

The Value of Timber Inventory Information.

Treesearch

B.E. Borders; W.M. Harrison; M.L. Clutter; B.D. Shiver; R.A. Souter

2008-01-01

Timber inventory data is the basis for many monetary transactions related to timber and timberland sale and (or) purchase as well as for development of timber management plans. The value of such data is well known and much appreciated for sale and (or) purchase of standing merchantable timber.  Unfortunatley, the value of timber inventory data for planning...

Information transfer during the timber transaction period in West Virginia. USA

Treesearch

David W. McGill; Daniel J. Magill; James Kochenderfer; W. Mark Ford; Tom Schuler

2006-01-01

Timber harvesting has long-lasting impacts on the productivity and aesthetics of private forests. In many instances, landowners who possess high quality timber are at a competitive disadvantage during timber transactions--the time between a decision by the landowner to sell timber and the completion of the timber harvesting operation--as they may lack understanding of...

Analytical solutions and particle simulations of cross-field plasma sheaths

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerver, M.J.; Parker, S.E.; Theilhaber, K.

1989-08-30

Particles simulations have been made of an infinite plasma slab, bounded by absorbing conducting walls, with a magnetic field parallel to the walls. The simulations have been either 1-D, or 2-D, with the magnetic field normal to the simulation plane. Initially, the plasma has a uniform density between the walls, and there is a uniform source of ions and electrons to replace particles lost to the walls. In the 1-D case, there is no diffusion of the particle guiding centers, and the plasma remains uniform in density and potential over most of the slab, with sheaths about a Debye lengthmore » wide where the potential rises to the wall potential. In the 2-D case, the density profile becomes parabolic, going almost to zero at the walls, and there is a quasineutral presheath in the bulk of the plasma, in addition to sheaths near the walls. Analytic expressions are found for the density and potential profiles in both cases, including, in the 2-D case, the magnetic presheath due to finite ion Larmor radius, and the effects of the guiding center diffusion rate being either much less than or much grater than the energy diffusion rate. These analytic expressions are shown to agree with the simulations. A 1-D simulation with Monte Carlo guiding center diffusion included gives results that are good agreement with the much more expensive 2-D simulation. 17 refs., 10 figs.« less

Extra Luminal Entrapment of Guide Wire; A Rare Complication of Central Venous Catheter Placement in Right Internal Jugular Vein.

PubMed

Ansari, Md Abu Masud; Kumar, Naveen; Kumar, Shailesh; Kumari, Sarita

2016-10-01

Central venous Catheterization (CVC) is a commonly performed procedure for venous access. It is associated with several complications. We report a rare case of extra luminal entrapment of guide wire during CVC placement in right jugular vein. We report a case of 28 years old female patient presented in our emergency with history of entrapped guide wire in right side of neck during CVC. X-ray showed coiling of guide wire in neck. CT Angiography showed guide wire coursing in between common carotid artery and internal jugular vein (IJV), closely abutting the wall of both vessels. The guide wire was coiled with end coursing behind the esophageal wall. Guide wire was removed under fluoroscopic guide manipulation under local anesthesia. We want to emphasize that even though CVC placement is common and simple procedure, serious complication can occur in hands of untrained operator. The procedure should be performed under supervision, if done by trainee. Force should never be applied to advance the guide wire if resistance is encountered.

Timber products output and timber harvests in Alaska: projections for 1989-2010.

Treesearch

David J. Brooks; Richard W. Haynes

1990-01-01

Projections of Alaska timber products output and timber harvest by owner were developed by using a detailed, trend-based analysis. Historical data for 1965-88 were the basis for projections for 1989-2010. Projections of timber products output for each major product (export logs, sawn wood, and market pulp) were used to compute the derived demand for timber. The...

Timber resources of northern interior California, 1970.

Treesearch

Charles L. Bolsinger

1976-01-01

This report summarizes a timber resource inventory in Lassen, Modoc, Siskiyou, Shasta, and Trinity Counties, California. Included are detailed tables of forest area, timber volume, growth, mortality, and removals and a discussion of the current timber resource and timber industry situation.

Hygrothermal Properties of Cross Laminated Timber and Moisture Response of Wood at High Relative Humidity

NASA Astrophysics Data System (ADS)

AlSayegh, George

Cross Laminated Timber (CLT) is a new wood-based material composed of cross laminated wood boards that form a structural panel. This study focuses on identifying the appropriate methods to determine the hygrothermal properties of CLTs fabricated with Canadian and European Lumber. The laboratory tests carried out in this study will help establish heat, air and moisture response properties to be used for hygrothermal simulation to assess the durability of CLTs in building envelope construction. Measurement of water vapour permeability, liquid water absorption, sorption isotherms, thermal conductivity, and air permeability were performed on three Canadian CLT specimens composed of Hem-Fir, Eastern Spruce-Pine-Fir, and Western Spruce-Pine-Fir and one European specimen composed of Spruce. The hygrothermal properties of CLT, considered in this study, appear to be similar to commonly used wood specimens reported in the literature. However, liquid water absorption coefficients of CLT were found to be generally lower than common wood species, possibly due to the presence of glue between the wood layers which limits the moisture movement across the specimen. On the other hand, the air permeability across the CLT specimens varied due to the glue discontinuity within the specimen which led some CLTs to be permeable, however all the European specimens were found to be impermeable. This study also critically analyzed the significance of equilibrium moisture content (EMC) of wood at high relative humidity, measured by means of a pressure plate apparatus and humidity chambers, on the moisture management performance of a wood-frame stucco wall, using the hygrothermal simulation tool hygIRC-2D. The simulation results indicate that the prediction of the moisture response of a wood-frame stucco wall assembly depends significantly on the method adopted to derive the EMC of wood at high RH.

Lamb mode selection for accurate wall loss estimation via guided wave tomography

NASA Astrophysics Data System (ADS)

Huthwaite, P.; Ribichini, R.; Lowe, M. J. S.; Cawley, P.

2014-02-01

Guided wave tomography offers a method to accurately quantify wall thickness losses in pipes and vessels caused by corrosion. This is achieved using ultrasonic waves transmitted over distances of approximately 1-2m, which are measured by an array of transducers and then used to reconstruct a map of wall thickness throughout the inspected region. To achieve accurate estimations of remnant wall thickness, it is vital that a suitable Lamb mode is chosen. This paper presents a detailed evaluation of the fundamental modes, S0 and A0, which are of primary interest in guided wave tomography thickness estimates since the higher order modes do not exist at all thicknesses, to compare their performance using both numerical and experimental data while considering a range of challenging phenomena. The sensitivity of A0 to thickness variations was shown to be superior to S0, however, the attenuation from A0 when a liquid loading was present was much higher than S0. A0 was less sensitive to the presence of coatings on the surface of than S0.

Successful Treatment of Abdominal Cutaneous Entrapment Syndrome Using Ultrasound Guided Injection

PubMed Central

Hong, Myong Joo; Seo, Dong Hyuk

2013-01-01

There are various origins for chronic abdominal pain. About 10-30% of patients with chronic abdominal pain have abdominal wall pain. Unfortunately, abdominal wall pain is not thought to be the first origin of chronic abdominal pain; therefore, patients usually undergo extensive examinations, including diagnostic laparoscopic surgery. Entrapment of abdominal cutaneous nerves at the muscular foramen of the rectus abdominis is a rare cause of abdominal wall pain. If abdominal wall pain is considered in earlier stage of chronic abdominal pain, unnecessary invasive procedures are not required and patients will reach symptom free condition as soon as the diagnosis is made. Here, we report a case of successful treatment of a patient with abdominal cutaneous nerve entrapment syndrome by ultrasound guided injection therapy. PMID:23862004

Soft J-tipped guide wire-induced cardiac perforation in a patient with right ventricular lipomatosis and wall thinning.

PubMed

Hiroshima, Yuki; Tajima, Katsushi; Shiono, Yousuke; Suzuki, Ikuko; Kohno, Kei; Kato, Yuichi; Shunji, Kawamura; Kato, Takeo

2012-01-01

Cardiac tamponade caused by perforation is a rare but potentially lethal complication of central venous catheter (CVC) insertion. We herein report a case of cardiac perforation associated with the use of a soft J-tipped guide wire. Twenty minutes after the insertion of a CVC, the patient developed unexpected cardiac arrest. An autopsy revealed 400 mL of pericardial blood. The right ventricular wall was 1 mm thick with about 10 myocyte layers, which is one-third that of the normal heart. A histological analysis revealed widespread fatty infiltration of the right ventricular wall (right ventricular lipomatosis).

Seismic damage to structures in the M s6.5 Ludian earthquake

NASA Astrophysics Data System (ADS)

Chen, Hao; Xie, Quancai; Dai, Boyang; Zhang, Haoyu; Chen, Hongfu

2016-03-01

On 3 August 2014, the Ludian earthquake struck northwest Yunnan Province with a surface wave magnitude of 6.5. This moderate earthquake unexpectedly caused high fatalities and great economic loss. Four strong motion stations were located in the areas with intensity V, VI, VII and IX, near the epicentre. The characteristics of the ground motion are discussed herein, including 1) ground motion was strong at a period of less than 1.4 s, which covered the natural vibration period of a large number of structures; and 2) the release energy was concentrated geographically. Based on materials collected during emergency building inspections, the damage patterns of adobe, masonry, timber frame and reinforced concrete (RC) frame structures in areas with different intensities are summarised. Earthquake damage matrices of local buildings are also given for fragility evaluation and earthquake damage prediction. It is found that the collapse ratios of RC frame and confined masonry structures based on the new design code are significantly lower than non-seismic buildings. However, the RC frame structures still failed to achieve the `strong column, weak beam' design target. Traditional timber frame structures with a light infill wall showed good aseismic performance.

Fluoroscopy-Guided Pull-Through Gastrostomy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pitton, M. B., E-mail: pitton@radiologie.klinik.uni-mainz.de; Herber, S.; Dueber, C.

2008-01-15

The purpose of this study was to simplify a fluoroscopy guided gastrostomy technique using pull-type tubes which are traditionally introduced with gastroscopic assistance. The stomach was transorally probed with a 5-Fr catheter and a guidewire. A second access was performed percutaneously through the anterior abdominal and gastric wall using an 8-Fr sheath and an 8-Fr guiding catheter. A duplicated guidewire was introduced through the guiding catheter in order to result in a great custom-made loop within the stomach. The transoral guidewire was captured and tightened with this loop and the guiding catheter, and both were subsequently pulled by the transoralmore » guidewire until the tip of the guiding catheter exited the mouth. A thread was fed through the guiding catheter for fixation of the pull-type gastrostomy tube. Finally, the fixed tube was pulled through the esophagus into the stomach and through the abdominal wall until the anterior gastric wall fixed the retention plate of the tube. Thirty-seven patients (28 male, 9 female; age, 65.1 {+-} 14.4 years) with miscellaneous indications for percutaneous gastrostomies were supplied with pull-type gastrostomy catheters in a fluoroscopy technique without endoscopic assistance. Twenty-five of the 37 patients (67.6%) had undergone unsuccessful preceding gastroscopically guided PEG attempts because of tumor stenosis (n = 12) or impossible transillumination of the abdominal wall (n = 13). All procedures were technically successful, without major complications. Particularly, all patients with frustrating gastroscopic attempts were successfully provided with pull-type gastrostomy tubes. Five minor complications occurred: one tube loss during the passage of the hypopoharynx because of a torn thread, one transient small leakage alongside the tube (both successfully treated), and three cases of transient moderate local pain without leakage (symptomatic treatment). We conclude that this fluoroscopy-guided pull-through gastrostomy technique is easy and safe to perform and may be suggested as a standard procedure for radiological gastrostomies. It combines the ease of the radiological approach with the advantages of the pull-type tube devices, particularly the benefits of the typical retention plates.« less

Constant Group Velocity Ultrasonic Guided Wave Inspection for Corrosion and Erosion Monitoring in Pipes

NASA Astrophysics Data System (ADS)

Instanes, Geir; Pedersen, Audun; Toppe, Mads; Nagy, Peter B.

2009-03-01

This paper describes a novel ultrasonic guided wave inspection technique for the monitoring of internal corrosion and erosion in pipes, which exploits the fundamental flexural mode to measure the average wall thickness over the inspection path. The inspection frequency is chosen so that the group velocity of the fundamental flexural mode is essentially constant throughout the wall thickness range of interest, while the phase velocity is highly dispersive and changes in a systematic way with varying wall thickness in the pipe. Although this approach is somewhat less accurate than the often used transverse resonance methods, it smoothly integrates the wall thickness over the whole propagation length, therefore it is very robust and can tolerate large and uneven thickness variations from point to point. The constant group velocity (CGV) method is capable of monitoring the true average of the wall thickness over the inspection length with an accuracy of 1% even in the presence of one order of magnitude larger local variations. This method also eliminates spurious variations caused by changing temperature, which can cause fairly large velocity variations, but do not significantly influence the dispersion as measured by the true phase angle in the vicinity of the CGV point. The CGV guided wave CEM method was validated in both laboratory and field tests.

Timber Products Supply and Demand

Treesearch

Jeffrey P. Prestemon; Robert C. Abt

2002-01-01

This chapter describes historical, current, and projected timber inventories and timber product outputs from southern forests. It also attempts to place these quantities in national and international perspectives. Timber is the most valuable commercial commodity taken from most forests, and its removal strongly influences the character of those forests. Timber is...

Material Characterization for Composite Materials in Load Bearing Wave Guides

DTIC Science & Technology

2012-03-01

ISIS Integrated Sensor Is Structure MUSTRAP Multifunctional Structural Aperture MWCNT Multi-walled Carbon Nanotube SWCNT Single-walled Carbon...CNTs go through a specific process to coat them with nickel. The process includes conditioning the CNTs in different solutions and adding...a single-walled carbon nanotube (SWCNT), a multi-walled carbon nanotube ( MWCNT ), or a graphene nanoribbon (GNR). A SWCNT is a hollow cylindrical

48 CFR 452.236-79 - Opted Timber Sale Road Requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Opted Timber Sale Road... Opted Timber Sale Road Requirements. As prescribed in 436.579, insert the following clause: Opted Timber Sale Road Requirements (NOV 1996) This contract is for the construction of timber sale road(s) which a...

Forest Productivity and Timber Supply Modeling in the South

Treesearch

Frederick Cubbage; Jacek Siry; Robert Abt; David N. Wear; Steverson Moffat

1998-01-01

The South can increase forest productivity on industrial and nonindustrial private forest (NIPF) lands. As timber markets have improved and timber prices have increased, returns from intensive management are more profitable. The interaction of timber markets, inventory, and prices are analyzed in new southern timber supply models sponsored by the Southern Forest...

36 CFR 223.32 - Timber sale operating plan.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber sale operating plan... SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Conditions and Provisions § 223.32 Timber sale operating plan. Sale contracts with a term of 2 years or more shall provide...

An intravascular loopless monopole antenna for vessel wall MR imaging at 3.0 T.

PubMed

Yuan, Hongyang; Lv, Xing; Ma, Xiaohai; Zhang, Rui; Fu, Youyi; Yang, Xuedong; Wang, Xiaoying; Zhang, Zhaoqi; Zhang, Jue; Fang, Jing

2013-01-01

The purpose of this study was to develop a novel intravascular loopless monopole antenna (ILMA) design specifically for imaging of small vessel walls. The ILMA consisted of an unshielded, low-friction guide wire and a tuning/matching box. The material of the guide wire was nitinol and it was coated with polyurethane. Because the guide wire was unshielded, it could be made thinner than the coaxial cable-based loopless intravascular antenna design. The material of the box was aluminum. In this study, the diameter of the guide wire was 0.5 mm and the length was 58.7 mm. The ILMA was used as a receiving antenna and body coil for transmission. To verify the feasibility of the ILMA, in vitro and in vivo experiments were performed on a 3.0-T magnetic resonance (MR) scanner. In vitro tests using the ILMA indicated that the proposed design could be used to image target vessel walls with a spatial resolution of 313 μm at the frequency coding direction and more than 100 mm of longitudinal coverage. In vivo tests demonstrated that the images showed the vessel walls clearly by using the ILMA and also indicated that the ILMA could be used for small vessels. The proposed antenna may therefore be utilized to promote MR-based diagnoses and therapeutic solutions for cardiovascular atherosclerotic diseases. Copyright © 2013 Elsevier Inc. All rights reserved.

Mapping-guided characterization of mechanical and electrical activation patterns in patients with normal systolic function using a sensor-based tracking technology.

PubMed

Piorkowski, Christopher; Breithardt, Ole-A; Razavi, Hedi; Nabutovsky, Yelena; Rosenberg, Stuart P; Markovitz, Craig D; Arya, Arash; Rolf, Sascha; John, Silke; Kosiuk, Jedrzej; Olson, Eric; Eitel, Charlotte; Huo, Yan; Döring, Michael; Richter, Sergio; Ryu, Kyungmoo; Gaspar, Thomas; Prinzen, Frits W; Hindricks, Gerhard; Sommer, Philipp

2017-10-01

In times of evolving cardiac resynchronization therapy, intra-procedural characterization of left ventricular (LV) mechanical activation patterns is desired but technically challenging with currently available technologies. In patients with normal systolic function, we evaluated the feasibility of characterizing LV wall motion using a novel sensor-based, real-time tracking technology. Ten patients underwent simultaneous motion and electrical mapping of the LV endocardium during sinus rhythm using electroanatomical mapping and navigational systems (EnSite™ NavX™ and MediGuide™, SJM). Epicardial motion data were also collected simultaneously at corresponding locations from accessible coronary sinus branches. Displacements at each mapping point and times of electrical and mechanical activation were combined over each of the six standard LV wall segments. Mechanical activation timing was compared with that from electrical activation and preoperative 2D speckle tracking echocardiography (echo). MediGuide-based displacement data were further analysed to estimate LV chamber volumes that were compared with echo and magnetic resonance imaging (MRI). The lateral and septal walls exhibited the largest (12.5 [11.6-15.0] mm) and smallest (10.2 [9.0-11.3] mm) displacement, respectively. Radial displacement was significantly larger endocardially than epicardially (endo: 6.7 [5.0-9.1] mm; epi: 3.8 [2.4-5.6] mm), while longitudinal displacement was significantly larger epicardially (endo: 8.0 [5.0-10.6] mm; epi: 10.3 [7.4-13.8] mm). Most often, the anteroseptal/anterior and lateral walls showed the earliest and latest mechanical activations, respectively. 9/10 patients had concordant or adjacent wall segments of latest mechanical and electrical activation, and 6/10 patients had concordant or adjacent wall segments of latest mechanical activation as measured by MediGuide and echo. MediGuide's LV chamber volumes were significantly correlated with MRI (R2= 0.73, P < 0.01) and echo (R2= 0.75, P < 0.001). The feasibility of mapping-guided intra-procedural characterization of LV wall motion was established. http://www.clinicaltrials.gov; Unique identifier: CT01629160. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2016. For permissions please email: journals.permissions@oup.com.

The timber industries of southern New England--a periodic assessment of timber output

Treesearch

Robert L., Jr. Nevel; Eric H. Wharton; Eric H. Wharton

1988-01-01

Evaluates regional timber output based on the results of a survey of the timber industries of southern New England. Contains statistics on industrial timber production and receipts in Connecticut, Massachusetts and Rhode Island, by state and species, log shipments between states, sawmills and lumber production, and the production and disposition of manufacturing...

The forest ecosystem of southeast Alaska: 7. Forest ecology and timber management.

Treesearch

Arland S. Harris; Wilbur A. Farr

1974-01-01

Large-scale use of the timber resource of southeast Alaska began in 1953 after long efforts to establish a timber industry. Development and present status of the industry and present management of the timber resource are summarized, stressing the biological basis for timber management activities in southeast Alaska today. Ecological and silvicultural considerations...

Mechanical grading of oak timbers

Treesearch

David E. Kretschmann; David W. Green

1999-01-01

For many wood species, the grading of timbers [>76 mm (>4-in.) thick] has not changed in decades. Most timbers are still visually graded by methods that originated in the 1930s. Mechanical grading procedures used to accurately grade 38-mm (2-in. nominal) dimension lumber have not been adapted for use with timbers. Furthermore, the only reliable timber test data...

Simulating Timber and Deer Food Potential In Loblolly Pine Plantations

Treesearch

Clifford A. Myers

1977-01-01

This computer program analyzes both timber and deer food production on managed forests, providing estimates of the number of acres required per deer for each week or month, yearly timber cuts, and current timber growing stock, as well as a cost and return analysis of the timber operation. Input variables include stand descriptors, controls on management, stumpage...

Timber RAM. . .a long-range planning method for commercial timber lands under multiple-use management

Treesearch

Daniel I. Navon

1971-01-01

Timber RAM (Resource Allocation Method) is a long-range planning method for commercial timber lands under multiple-use management. Timber RAM can produce cutting and reforestation schedules and related harvest and economic reports. Each schedule optimizes an index of performance, subject to periodic constraints on revenues, costs, and, harvest levels. Periodic...

Spatial ecology of timber rattlesnakes on the hardwood ecosystem experiment: pre-treatment results

Treesearch

Brian J. MacGowan; Zachary J. Walker

2013-01-01

The timber rattlesnake (Crotalus horridus) is a species of conservation concern throughout much of its geographic range and may serve as a sentinel species in investigations of the effects of timber harvesting on forest reptiles. Our objective was to determine the effect of even-aged timber management regimes on timber rattlesnake home range and...

Market Dynamics and Optimal Timber Salvage After a Natural Catastrophe

Treesearch

Jeffrey P. Prestemon; Thomas P. Holmes

2004-01-01

Forest-based natural catastrophes are regular features of timber production in the United States, especially from hurricanes, fires, and insect and disease outbreaks. These catastrophes affect timber prices and result in economic transfers. We develop a model of timber market dynamics after such a catastrophe that shows how timber salvage affects the welfare of...

Timber Supply: Mississippi and the South

Treesearch

Robert C. Abt; Fredrick W. Cubbage; Karen J. Lee; Ian Munn

1998-01-01

The availability of timber has become an issue across the South as supplies from other regions are constrained and as demand for timber continues to grow. Whiie any individual state or landowner will have a small impact on national timber supplies, the avaibility of local timber will have a profound effect on local industries. In Mississippi, for example,...

Effects of Timber Harvest on River Food Webs: Physical, Chemical and Biological Responses

PubMed Central

Wootton, J. Timothy

2012-01-01

I compared physical, chemical and biological characteristics of nine rivers running through three timber harvest regimes to investigate the effects of land use on river ecosystems, to determine whether these corresponded to changes linked with downstream location, and to compare the response of different types of indicator variables. Physical variables changed with downstream location, but varied little with timber harvest. Most chemical variables increased strongly with timber harvest, but not with downstream location. Most biological variables did not vary systematically with either timber harvst or downstream location. Dissolved organic carbon did not vary with timber harvest or downstream location, but correlated positively with salmonid abundance. Nutrient manipulations revealed no general pattern of nutrient limitation with timber harvest or downstream location. The results suggest that chemical variables most reliably indicate timber harvest impact in these systems. The biological variables most relevant to human stakeholders were surprisingly insensitive to timber harvest, however, apparently because of decoupling from nutrient responses and unexpectedly weak responses by physical variables. PMID:22957030

[Research Award providing funds for a tracking video camera

NASA Technical Reports Server (NTRS)

Collett, Thomas

2000-01-01

The award provided funds for a tracking video camera. The camera has been installed and the system calibrated. It has enabled us to follow in real time the tracks of individual wood ants (Formica rufa) within a 3m square arena as they navigate singly in-doors guided by visual cues. To date we have been using the system on two projects. The first is an analysis of the navigational strategies that ants use when guided by an extended landmark (a low wall) to a feeding site. After a brief training period, ants are able to keep a defined distance and angle from the wall, using their memory of the wall's height on the retina as a controlling parameter. By training with walls of one height and length and testing with walls of different heights and lengths, we can show that ants adjust their distance from the wall so as to keep the wall at the height that they learned during training. Thus, their distance from the base of a tall wall is further than it is from the training wall, and the distance is shorter when the wall is low. The stopping point of the trajectory is defined precisely by the angle that the far end of the wall makes with the trajectory. Thus, ants walk further if the wall is extended in length and not so far if the wall is shortened. These experiments represent the first case in which the controlling parameters of an extended trajectory can be defined with some certainty. It raises many questions for future research that we are now pursuing.

Competition for National Forest timber: effects on timber-dependent communities.

Treesearch

Richard W. Haynes

1983-01-01

Results are reported for three studies that dealt with the influence of timber sale practices on competition for timber in the timber-dependent communities of Medford and Grant County An Oregon and those surrounding the Nezperce National Forest in Idaho. Results are also reported for a fourth study that examines how several firms managed their uncut volume under...

Timber products output and timber harvests in Alaska: projections for 1992-2010.

Treesearch

D.J. Brooks; R.W. Haynes

1994-01-01

Projections of Alaska timber products output, the derived demand for raw material, and timber harvest by owner are developed from a trend-based analysis. By using a spread-sheet model, material flows in the Alaska forest sectorare fully accounted for. Demand for Alaska national forest timber is projected and depends on product output and harvest by other owners. Key...

The Timber Resource Inventory Model (TRIM): a projection model for timber supply and policy analysis.

Treesearch

P.L. Tedder; R.N. La Mont; J.C. Kincaid

1987-01-01

TRIM (Timber Resource Inventory Model) is a yield table projection system developed for timber supply projections and policy analysis. TRIM simulates timber growth, inventories, management and area changes, and removals over the projection period. Programs in the TRIM system, card-by-card descriptions of required inputs, table formats, and sample results are presented...

Deconstructing the timber volume paradigm in management of the Tongass National Forest.

Treesearch

John P. Caouette; Marc G. Kramer; Gregory J. Nowacki

2000-01-01

Timber volume information and associated maps have been widely used in the Tongass National Forest for land-use planning and timber and wildlife management. Although considerable effort has been expended to improve timber volume maps, little has been done to evaluate the suitability of timber volume as a descriptor of forest character.We established a rough indicator...

Determinants of Non-Timber Values in Wisconsin Northern Hardwoods

Treesearch

Richard Scarpa; Joseph Buongiorno; Karen Lee

1998-01-01

A working definition of non-timber value is the difference between the revenues attainable by implementing an infinite horizon timber revenue maximizing cutting rule, and the value of the observed harvest. This non-timber value was estimated for the stands of the Forest Inventory Analysis data in the maple-beech-birch type in Wisconsin. Non-timber values averaged 23...

36 CFR 221.3 - Disposal of national forest timber according to management plans.

Code of Federal Regulations, 2012 CFR

2012-07-01

... SERVICE, DEPARTMENT OF AGRICULTURE TIMBER MANAGEMENT PLANNING § 221.3 Disposal of national forest timber... and of opportunities for employment. (4) Provide for coordination of timber production and harvesting...

36 CFR 221.3 - Disposal of national forest timber according to management plans.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SERVICE, DEPARTMENT OF AGRICULTURE TIMBER MANAGEMENT PLANNING § 221.3 Disposal of national forest timber... and of opportunities for employment. (4) Provide for coordination of timber production and harvesting...

A Citizen's Guide to Vapor Intrusion Mitigation

EPA Pesticide Factsheets

This guide describes how vapor intrusion is the movement of chemical vapors from contaminated soil and groundwater into nearby buildings.Vapors primarily enter through openings in the building foundation or basement walls.

Projected US timber and primary forest product market impacts of climate change mitigation through timber set-asides

Treesearch

Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

2013-01-01

Whereas climate change mitigation involving payments to forest landowners for accumulating carbon on their land may increase carbon stored in forests, it will also affect timber supply and prices. This study estimated the effect on US timber and primary forest product markets of hypothetical timber set-aside scenarios where US forest landowners would be paid to forego...

The timber resources of Rhode Island

Treesearch

Roland H. Ferguson; John R. McGuire; John R. McGuire

1957-01-01

This is a report on the first comprehensive survey ever made of the timber resources of Rhode Island. It shows, for the years 1952 and 1953, the area and condition of the forest land, the volume and quality of standing timber, the rates of timber growth and mortality, and the extent of timber cutting for forest products. The survey was made by the Forest Service as...

A timber bridge initiative for Virginia : special report.

DOT National Transportation Integrated Search

1991-01-01

This report presents a plan for a timber bridge initiative in Virginia. It addresses (1) the immediate and future potential for using timber in the replacement of many of Virginia's bridges, (2) the available timber resources in Southside Virginia, (...

Monitoring of corrosion damage using high-frequency guided ultrasonic waves

NASA Astrophysics Data System (ADS)

Chew, D.; Fromme, P.

2014-03-01

Due to adverse environmental conditions corrosion can develop during the life cycle of industrial structures, e.g., offshore oil platforms, ships, and desalination plants. Both pitting corrosion and generalized corrosion leading to wall thickness loss can cause the degradation of the integrity and load bearing capacity of the structure. Structural health monitoring of corrosion damage in difficult to access areas can in principle be achieved using high frequency guided waves propagating along the structure from accessible areas. Using standard ultrasonic transducers with single sided access to the structure, high frequency guided wave modes were generated that penetrate through the complete thickness of the structure. Wall thickness reduction was induced using accelerated corrosion in a salt water bath. The corrosion damage was monitored based on the effect on the wave propagation and interference of the different modes. The change in the wave interference was quantified based on an analysis in the frequency domain (Fourier transform) and was found to match well with theoretical predictions for the wall thickness loss. High frequency guided waves have the potential for corrosion damage monitoring at critical and difficult to access locations from a stand-off distance.

Monitoring of corrosion damage using high-frequency guided ultrasonic waves

NASA Astrophysics Data System (ADS)

Chew, D.; Fromme, P.

2015-03-01

Due to adverse environmental conditions corrosion can develop during the life cycle of industrial structures, e.g., offshore oil platforms, ships, and desalination plants. Both pitting corrosion and generalized corrosion leading to wall thickness loss can cause the degradation of the integrity and load bearing capacity of the structure. Structural health monitoring of corrosion damage in difficult to access areas can in principle be achieved using high frequency guided waves propagating along the structure from accessible areas. Using standard ultrasonic transducers with single sided access to the structure, high frequency guided wave modes were generated that penetrate through the complete thickness of the structure. Wall thickness reduction was induced using accelerated corrosion in a salt water bath. The corrosion damage was monitored based on the effect on the wave propagation and interference of the different modes. The change in the wave interference was quantified based on an analysis in the frequency domain (Fourier transform) and was found to match well with theoretical predictions for the wall thickness loss. High frequency guided waves have the potential for corrosion damage monitoring at critical and difficult to access locations from a stand-off distance.

Timber production assessment of a plantation forest: An integrated framework with field-based inventory, multi-source remote sensing data and forest management history

NASA Astrophysics Data System (ADS)

Gao, Tian; Zhu, Jiaojun; Deng, Songqiu; Zheng, Xiao; Zhang, Jinxin; Shang, Guiduo; Huang, Liyan

2016-10-01

Timber production is the purpose for managing plantation forests, and its spatial and quantitative information is critical for advising management strategies. Previous studies have focused on growing stock volume (GSV), which represents the current potential of timber production, yet few studies have investigated historical process-harvested timber. This resulted in a gap in a synthetical ecosystem service assessment of timber production. In this paper, we established a Management Process-based Timber production (MPT) framework to integrate the current GSV and the harvested timber derived from historical logging regimes, trying to synthetically assess timber production for a historical period. In the MPT framework, age-class and current GSV determine the times of historical thinning and the corresponding harvested timber, by using a ;space-for-time; substitution. The total timber production can be estimated by the historical harvested timber in each thinning and the current GSV. To test this MPT framework, an empirical study on a larch plantation (LP) with area of 43,946 ha was conducted in North China for a period from 1962 to 2010. Field-based inventory data was integrated with ALOS PALSAR (Advanced Land-Observing Satellite Phased Array L-band Synthetic Aperture Radar) and Landsat-8 OLI (Operational Land Imager) data for estimating the age-class and current GSV of LP. The random forest model with PALSAR backscatter intensity channels and OLI bands as input predictive variables yielded an accuracy of 67.9% with a Kappa coefficient of 0.59 for age-class classification. The regression model using PALSAR data produced a root mean square error (RMSE) of 36.5 m3 ha-1. The total timber production of LP was estimated to be 7.27 × 106 m3, with 4.87 × 106 m3 in current GSV and 2.40 × 106 m3 in harvested timber through historical thinning. The historical process-harvested timber accounts to 33.0% of the total timber production, which component has been neglected in the assessments for current status of plantation forests. Synthetically considering the RMSE for predictive GSV and misclassification of age-class, the error in timber production were supposed to range from -55.2 to 56.3 m3 ha-1. The MPT framework can be used to assess timber production of other tree species at a larger spatial scale, providing crucial information for a better understanding of forest ecosystem service.

78 FR 73818 - Information Collection; Timber Sale Contract Operations and Administration

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... DEPARTMENT OF AGRICULTURE Forest Service Information Collection; Timber Sale Contract Operations...-0225, Timber Sale Contract Operations and Administration. DATES: Comments must be received in writing.... SUPPLEMENTARY INFORMATION: Title: Timber Sale Contract Operations and Administration. OMB Number: 0596-0225...

Timber resources of southwest Oregon.

Treesearch

Patricia M. Bassett

1979-01-01

This report presents statistics from a 1973 inventory of timber resources of Douglas County and from a 1974 inventory of timber resources of Coos, Curry, Jackson, and Josephine Counties, Oregon. Tables presented are of forest area and of timber volume, growth, and mortality.

Effect of heart checks on flexural properties of reclaimed 6 by 8 Douglas-fir timbers

Treesearch

David W. Green; Robert H. Falk; Scott F. Lantz

2001-01-01

A sampling of nominal 6- by 8-inch (standard 140- by 184-mm) Douglas-fir timbers was obtained from an industrial military building in Minnesota. Thirty selected timbers had heart checks (boxed heart splits), which are characteristic of most old timbers installed in dry locations. Sixty selected timbers did not have heart checks. Most of the beams would grade as Select...

Value of timber and agricultural products in the United States, 1991

Treesearch

D. B. McKeever; J. L. Howard

1996-01-01

In the United States, timber and agriculture are two important components of the Gross Domestic Product (GDP). The purpose of this study was to quantify the volume and value of timber in the U.S. economy in 1991 and compare the value of timber with that of agriculture. Combined, timber and agriculture accounted for 6.2 percent of total GDP in 1991, and 13.2 percent of...

Relationship of stump diameter to d.b.h. for white pine in the northeast

Treesearch

Jesse D. Diller

1954-01-01

A need to estimate the volume cut from a timber tract when only the stumps are left is often felt by foresters, timber operators, and landowners. This need arises in areas where timber sales are based on stump diameters, in timber trespass cases, in check cruises on marked timber sales (to determine volume cut from unmarked trees), and as an aid in piecing together the...

Physical suitability of Appalachian hardwood sawlogs for sawed timbers

Treesearch

Lawrence D. Garrett

1970-01-01

A study of the physical suitability of Appalachian hardwood sawlogs for manufacture of sawed timbers revealed that: most grade 1 logs can be used to saw timbers as large as 8 by 9 inches, end dimension; most grade 2 logs are suited for manufacture of timbers 6 by 8 inches and smaller; and most grade 3 logs are suited for manufacture of timbers 5 by 7 inches and smaller...

Structural Health Monitoring of Above-Ground Storage Tank Floors by Ultrasonic Guided Wave Excitation on the Tank Wall.

PubMed

Lowe, Premesh S; Duan, Wenbo; Kanfoud, Jamil; Gan, Tat-Hean

2017-11-04

There is an increasing interest in using ultrasonic guided waves to assess the structural degradation of above-ground storage tank floors. This is a non-invasive and economically viable means of assessing structural degradation. Above-ground storage tank floors are ageing assets which need to be inspected periodically to avoid structural failure. At present, normal-stress type transducers are bonded to the tank annular chime to generate a force field in the thickness direction of the floor and excite fundamental symmetric and asymmetric Lamb modes. However, the majority of above-ground storage tanks in use have no annular chime due to a simplified design and/or have a degraded chime due to corrosion. This means that transducers cannot be mounted on the chime to assess structural health according to the present technology, and the market share of structural health monitoring of above-ground storage tank floors using ultrasonic guided wave is thus limited. Therefore, the present study investigates the potential of using the tank wall to bond the transducer instead of the tank annular chime. Both normal and shear type transducers were investigated numerically, and results were validated using a 4.1 m diameter above-ground storage tank. The study results show shear mode type transducers bonded to the tank wall can be used to assess the structural health of the above-ground tank floors using an ultrasonic guided wave. It is also shown that for the cases studied there is a 7.4 dB signal-to-noise ratio improvement at 45 kHz for the guided wave excitation on the tank wall using shear mode transducers.

Structural Health Monitoring of Above-Ground Storage Tank Floors by Ultrasonic Guided Wave Excitation on the Tank Wall

PubMed Central

Kanfoud, Jamil; Gan, Tat-Hean

2017-01-01

There is an increasing interest in using ultrasonic guided waves to assess the structural degradation of above-ground storage tank floors. This is a non-invasive and economically viable means of assessing structural degradation. Above-ground storage tank floors are ageing assets which need to be inspected periodically to avoid structural failure. At present, normal-stress type transducers are bonded to the tank annular chime to generate a force field in the thickness direction of the floor and excite fundamental symmetric and asymmetric Lamb modes. However, the majority of above-ground storage tanks in use have no annular chime due to a simplified design and/or have a degraded chime due to corrosion. This means that transducers cannot be mounted on the chime to assess structural health according to the present technology, and the market share of structural health monitoring of above-ground storage tank floors using ultrasonic guided wave is thus limited. Therefore, the present study investigates the potential of using the tank wall to bond the transducer instead of the tank annular chime. Both normal and shear type transducers were investigated numerically, and results were validated using a 4.1 m diameter above-ground storage tank. The study results show shear mode type transducers bonded to the tank wall can be used to assess the structural health of the above-ground tank floors using an ultrasonic guided wave. It is also shown that for the cases studied there is a 7.4 dB signal-to-noise ratio improvement at 45 kHz for the guided wave excitation on the tank wall using shear mode transducers. PMID:29113058

2D and 3D GPR imaging of structural ceilings in historic and existing constructions

NASA Astrophysics Data System (ADS)

Colla, Camilla

2014-05-01

GPR applications in civil engineering are to date quite diversified. With respect to civil constructions and monumental buildings, detection of voids, cavities, layering in structural elements, variation of geometry, of moisture content, of materials, areas of decay, defects, cracks have been reported in timber, concrete and masonry elements. Nonetheless, many more fields of investigation remain unexplored. This contribution gives an account of a variety of examples of structural ceilings investigation by GPR radar in reflection mode, either as 2D or 3D data acquisition and visualisation. Ceilings have a pre-eminent role in buildings as they contribute to a good structural behaviour of the construction. Primarily, the following functions can be listed for ceilings: a) they carry vertical dead and live loads on floors and distribute such loads to the vertical walls; b) they oppose to external horizontal forces such as wind loads and earthquakes helping to transfer such forces from the loaded element to the other walls; c) they contribute to create the box skeleton and behaviour of a building, connecting the different load bearing walls and reducing the slenderness and flexural instability of such walls. Therefore, knowing how ceilings are made in specific buildings is of paramount importance for architects and structural engineers. According to the type of building and age of construction, ceilings may present very different solutions and materials. Moreover, in existing constructions, ceilings may have been substituted, modified or strengthened due to material decay or to change of use of the building. These alterations may often go unrecorded in technical documentation or technical drawings may be unavailable. In many cases, the position, orientation and number of the load carrying elements in ceilings may be hidden or not be in sight, due for example to the presence of false ceilings or to technical plants. GPR radar can constitute a very useful tool for investigating with rapidity and high resolution, thin as well as very thick ceilings, in a non-destructive manner. Ceilings may be made up as masonry vaults or timber/metal/concrete beams and elements laid down in one or two directions or, again, can be made as a combination of the above. A number of cases are here presented reporting on typical features to be recognised in radargrams in order to distinguish the material and possible shape of the relevant objects with the aim of providing a first small catalogue useful to the radar user and to professionals. This abstract is of interest for COST Action TU1208.

Analysis of Flexible Anchored Hollow WPC Quay Walls of the New Berth in Tur, Egypt

NASA Astrophysics Data System (ADS)

Elsayed, Ayman

2017-10-01

A seawall, also known as a bulkhead or retaining wall, is a structure built to reduce the effects of strong waves and to defend costal land from erosion. Traditionally, seawalls are made of steel, timber or concrete construction. Composite materials, however, have been recently introduced for their ease of installation/maintenance in dry processing, low cost, and environmentally friendly materials. A wood plastic composite (WPC) seawall system has been developed and patented for its unique hollow structure that can give greater stiffness and stability under various external stresses. This paper describes the development of design method used in the analysis of the WPC walls. The main challenge during the physical excavation works is to limit the deformations involved in order to minimize damage on adjacent structures. The deformations depend largely on the excavation and strutting procedures, but also on the properties of the structural elements like the soil, the sheet pile and strutting members. The detailed design procedure involves numerical analyses, national regulations and common practice considerations. The contribution of finite element method in this field was used herein to determine the lateral movements, the bending moments of the wall, the passive earth pressure of the soil and the tensile force exerted by the anchor rods. The overall objectives of this research can be divided into two categories, First calibration of the finite element model for the new Tur quay walls (the case study) and reviewing the results of the steel cross section that chosen and the suggested one. Second, analysis and comparing the results of WPC cross-sections with the designed Steel sheet pile wall (SPW).

Percutaneous coronary angioplasty of a left anterior descending artery implanted on a Dacron coronary prosthesis on an aortic conduit.

PubMed

Drobinski, G; Thomas, D; Funck, F; Metzger, J P; Canny, M; Grosgogeat, Y

1986-08-01

Certain surgical techniques may make it difficult to catheterize the coronary ostia and perform percutaneous coronary angioplasty. We report the case of a 48 year old patient who developed unstable angina four years after a Bentall's procedure with reimplantation of the coronary arteries on a Dacron coronary prosthesis. The anginal pain was related to very severe stenosis of the proximal segment of the left anterior descending artery. The difficulties encountered during the dilatation procedure were due to: (a) the ectopic position of the ostium of the prosthesis on the anterior aortic wall; (b) the forces exerted on the aortic prosthesis wall and on the valvular prosthesis during positioning of the guiding catheter which were poorly tolerated and induced a vagal reaction; (c) the direction taken by the distal tip of the guiding catheter, perpendicular to the wall of the aortic prosthesis; (d) the sinuosity of the arterial trajectory: the left coronary segment of the coronary prosthesis was directed towards the left circumflex artery rather than towards the left anterior descending artery. Coronary angioplasty succeeded after relatively complex technical procedures: special guiding catheter, unusual intra-aortic manoeuvres for positioning the guiding catheter, dilatation catheter change on a 3-metre long guide wire in order to cross the stenotic segment; this was performed with a super low-profiled dilatation catheter. There were no complications and anginal pain disappeared.

36 CFR 223.49 - Downpayments.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 223.49 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS Timber Sale... purchaser bids for timber offered. (3) Lump sum timber sales are premeasured sales where the entire value of...

36 CFR 223.49 - Downpayments.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 223.49 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Conditions and Provisions § 223.49... excess of the advertised value that a purchaser bids for timber offered. (3) Lump sum timber sales are...

48 CFR 436.579 - Opted timber sale road requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Sale Road Requirements, in road construction contracts resulting from a timber sale turnback. ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Opted timber sale road... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 436.579 Opted timber...

Back-to-School Countdown: A Planning Guide for Time-Conscious Teachers.

ERIC Educational Resources Information Center

Spann, Mary Beth

1991-01-01

This planning guide for efficient use of the last weeks before school opens offers ideas for interactive hall and wall displays, a guide to self-made math manipulatives, a materials checklist, a four-week task planning countdown, and a listing of teacher resource books and other classroom materials. (SM)

36 CFR 223.45 - Definitions applicable to transfer of purchaser credit.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract... business entities having timber sale contracts on the same National Forest. The term National Forest shall... estimated remaining unscaled (unreported on tree measurement contracts) volumes by species of timber...

The fourth Minnesota forest inventory: timber volumes and projections of timber supply.

Treesearch

John S. Jr. Spencer

1982-01-01

The fourth inventory of Minnesota's forest resources shows a 21% increase in growing-stock volume between 1962 and 1977, from 9.4 to 11.5 billion cubic feet. Presented are text and statistics on timber volume, growth, mortality, removals, and future timber supply.

Understanding the relationships between American ginseng harvest and hardwood forests inventory and timber harvest to improve co-management of the forests of eastern United States

Treesearch

James L. Chamberlain; Stephen Prisley; Michael McGuffin

2013-01-01

The roots of American ginseng have been harvested from the hardwood forests of eastern United States, along-side timber, since the mid-1700s. Very little is known about this non-timber commodity relative to timber, although significant volumes of ginseng root have been harvested from the same forests along with timber. The harvest of ginseng correlated positively and...

Geologic map of the Paintbrush Canyon Area, Yucca Mountain, Nevada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickerson, R.P.; Drake, R.M. II

This geologic map is produced to support site characterization studies of Yucca Mountain, Nevada, site of a potential nuclear waste storage facility. The area encompassed by this map lies between Yucca Wash and Fortymile Canyon, northeast of Yucca Mountain. It is on the southern flank of the Timber Mountain caldera complex within the southwest Nevada volcanic field. Miocene tuffs and lavas of the Calico Hills Formation, the Paintbrush Group, and the Timber Mountain Group crop out in the area of this map. The source vents of the tuff cones and lava domes commonly are located beneath the thickest deposits ofmore » pyroclastic ejecta and lava flows. The rocks within the mapped area have been deformed by north- and northwest-striking, dominantly west-dipping normal faults and a few east-dipping normal faults. Faults commonly are characterized by well developed fault scarps, thick breccia zones, and hanging-wall grabens. Latest movement as preserved by slickensides on west-dipping fault scarps is oblique down towards the southwest. Two of these faults, the Paintbrush Canyon fault and the Bow Ridge fault, are major block-bounding faults here and to the south at Yucca Mountain. Offset of stratigraphic units across faults indicates that faulting occurred throughout the time these volcanic units were deposited.« less

A Signal Processing Approach with a Smooth Empirical Mode Decomposition to Reveal Hidden Trace of Corrosion in Highly Contaminated Guided Wave Signals for Concrete-Covered Pipes

PubMed Central

Rostami, Javad; Chen, Jingming; Tse, Peter W.

2017-01-01

Ultrasonic guided waves have been extensively applied for non-destructive testing of plate-like structures particularly pipes in past two decades. In this regard, if a structure has a simple geometry, obtained guided waves’ signals are easy to explain. However, any small degree of complexity in the geometry such as contacting with other materials may cause an extra amount of complication in the interpretation of guided wave signals. The problem deepens if defects have irregular shapes such as natural corrosion. Signal processing techniques that have been proposed for guided wave signals’ analysis are generally good for simple signals obtained in a highly controlled experimental environment. In fact, guided wave signals in a real situation such as the existence of natural corrosion in wall-covered pipes are much more complicated. Considering pipes in residential buildings that pass through concrete walls, in this paper we introduced Smooth Empirical Mode Decomposition (SEMD) to efficiently separate overlapped guided waves. As empirical mode decomposition (EMD) which is a good candidate for analyzing non-stationary signals, suffers from some shortcomings, wavelet transform was adopted in the sifting stage of EMD to improve its outcome in SEMD. However, selection of mother wavelet that suits best for our purpose plays an important role. Since in guided wave inspection, the incident waves are well known and are usually tone-burst signals, we tailored a complex tone-burst signal to be used as our mother wavelet. In the sifting stage of EMD, wavelet de-noising was applied to eliminate unwanted frequency components from each IMF. SEMD greatly enhances the performance of EMD in guided wave analysis for highly contaminated signals. In our experiment on concrete covered pipes with natural corrosion, this method not only separates the concrete wall indication clearly in time domain signal, a natural corrosion with complex geometry that was hidden and located inside the concrete section was successfully exposed. PMID:28178220

A Signal Processing Approach with a Smooth Empirical Mode Decomposition to Reveal Hidden Trace of Corrosion in Highly Contaminated Guided Wave Signals for Concrete-Covered Pipes.

PubMed

Rostami, Javad; Chen, Jingming; Tse, Peter W

2017-02-07

Ultrasonic guided waves have been extensively applied for non-destructive testing of plate-like structures particularly pipes in past two decades. In this regard, if a structure has a simple geometry, obtained guided waves' signals are easy to explain. However, any small degree of complexity in the geometry such as contacting with other materials may cause an extra amount of complication in the interpretation of guided wave signals. The problem deepens if defects have irregular shapes such as natural corrosion. Signal processing techniques that have been proposed for guided wave signals' analysis are generally good for simple signals obtained in a highly controlled experimental environment. In fact, guided wave signals in a real situation such as the existence of natural corrosion in wall-covered pipes are much more complicated. Considering pipes in residential buildings that pass through concrete walls, in this paper we introduced Smooth Empirical Mode Decomposition (SEMD) to efficiently separate overlapped guided waves. As empirical mode decomposition (EMD) which is a good candidate for analyzing non-stationary signals, suffers from some shortcomings, wavelet transform was adopted in the sifting stage of EMD to improve its outcome in SEMD. However, selection of mother wavelet that suits best for our purpose plays an important role. Since in guided wave inspection, the incident waves are well known and are usually tone-burst signals, we tailored a complex tone-burst signal to be used as our mother wavelet. In the sifting stage of EMD, wavelet de-noising was applied to eliminate unwanted frequency components from each IMF. SEMD greatly enhances the performance of EMD in guided wave analysis for highly contaminated signals. In our experiment on concrete covered pipes with natural corrosion, this method not only separates the concrete wall indication clearly in time domain signal, a natural corrosion with complex geometry that was hidden and located inside the concrete section was successfully exposed.

New York Timber industries - a periodic assessment of timber output

Treesearch

Robert L., Jr. Nevel; Everett L Sochia; Thomas H. Wahl; Thomas H. Wahl

1982-01-01

Reports the results of a survey of the timber industries of New York; contains statistics on industrial timber production and receipts, and production and disposition of the manufacturing residues. Comparisons are made with the most recent survey, and trends in industrial wood output are noted. Includes 18 statistical tables.

Timber in Missouri, 1972.

Treesearch

John S. Jr. Spencer; Burton L. Essex

1976-01-01

The third inventory of Missouri's timber resource shows a small gain in growing-stock volume and a somewhat larger gain in sawtimber volume since 1959. Area of commercial forest declined sharply between surveys. Presented are text and statistics on forest area and timber volume, growth, mortality, ownership, stocking, future timber supply, and forest management...

Enviromentally Sound Timber Extracting Techniques for Small Tree Harvesting

Treesearch

Lihai Wang

1999-01-01

Due to large area disturbed and great deal of energy cost during-its operations, introducing or applying the appropriate timber extracting techniques could significantly reduce the impact of timber extraction operations to forest environment while pursuing the reasonable operation costs. Four environmentally sound timber extraction techniques for small tree harvesting...

Likelihood of Timber Management on Nonindustrial Private Forests: Evidence From Research Studies

Treesearch

Ralph J. Alig; Karen J. Lee; Robert J. Moulton

1990-01-01

Research on timber management tendencies by nonindustrial private forest owners, while sometimes conflicting, provides useful information to support policy analyses of timber supply and investment behavior. Numerous research studies regarding tree planting, intermediate stand treatments, and timber harvesting are reviewed. Conclusive research findings include that: (1...

Estimating timber supply from private forests

Treesearch

D.F. Dennis

1991-01-01

Nonindustrial private landowners, who hold a majority of the Nation's commercial forests, own land primarily for reasons other than timber production. The multiple objective and dynamic nature of private ownership make planning and estimation of timber availability from this sector extremely difficult. Insight into the determinants of timber supply from private...

Alabama's timber industry - an assessment of timber product output and use, 1995

Treesearch

Tony G. Johnson; Jim R. Gober; J. Stephen Nix

1998-01-01

Output of Industrial Timber Products.Note: The reader must understand that certain terms, namely-retained, export, import, production, and receipts-have specialized meanings and relationships. unique to the Forest Inventory and Analysis Units across the country that deal with timber products output.In 1995, the combined...

Guided-waves technique for inspecting the health of wall-covered building risers

NASA Astrophysics Data System (ADS)

Tse, Peter W.; Chen, J. M.; Wan, X.

2015-03-01

The inspection technique uses guided ultrasonic waves (GW) has been proven effective in detecting pipes' defects. However, as of today, the technique has not attracted much market attention because of insufficient field tests and lack of traceable records with proven results in commercial applications. In this paper, it presents the results obtained by using GW to inspect the defects occurred in real gas risers that are commonly installed in tall buildings. The purpose of having risers is to deliver gas from any building external piping system to each household unit of the building. The risers extend from the external wall of the building, penetrate thorough the concrete wall, into the kitchen or bathroom of each household unit. Similar to in-service pipes, risers are prone to corrosion due to water leaks into the concrete wall. However, the corrosion occurs in the section of riser, which is covered by the concrete wall, is difficult to be inspected by conventional techniques. Hence, GW technique was employed. The effectiveness of GW technique was tested by laboratory and on-site experiments using real risers gathered from tall buildings. The experimental results show that GW can partially penetrate thorough the riser's section that is covered by wall. The integrity of the wall-covered section of a riser can be determined by the reflected wave signals generated by the corroded area that may exit inside the wall-covered section. Based on the reflected wave signal, one can determine the health of the wall-covered riser.

Characterization of tabique walls nails of the Alto Douro Wine Region

NASA Astrophysics Data System (ADS)

Cardoso, Rui; Pinto, Jorge; Paiva, Anabela; Lanzinha, João Carlos

2016-11-01

Tabique is one of the main Portuguese traditional building techniques which use raw materials as stone, earth andwood. In general, a tabique building component as a wall consist of a wooden structure made up of vertical boards connected to laths by metal nails and covered on both sides by an earth based material. This traditional building technology as an expressive incidence in the Alto Douro Wine Region located in the interior of Northern Portugal, added to the UNESCO's Word Heritage Sites List in December 2001 as an `evolved continuing cultural landscape'. Furthermore, previous research works have shown that the existing tabique construction, in this region, reveals a certain lack of maintenance partially justified by the knowledge loosed on that technique, consequently this construction technique present an advanced stage of deterioration. This aspect associated to the fact that there is still a lack of scientific studies in this field motivated the writing of this paper, the main objectives are to identify and characterize the nails used in the timber connections. The nails samples were collected from tabique walls included in tabique buildings located in LamegoMunicipality, near Douro River, in the Alto Douro Wine Region. This work also intends to give guidelines to the rehabilitation and preservation of this important legacy.

Numerical simulation on behaviour of timber-concrete composite beams in fire

NASA Astrophysics Data System (ADS)

Du, Hao; Hu, Xiamin; Zhang, Bing; Minli, Yao

2017-08-01

This paper established sequentially coupled thermal-mechanical models of timber--concrete composite (TCC) beams by finite element software ANSYS to investigate the fire resistance of TCC beam. Existing experimental results were used to verify the coupled thermal-mechanical model. The influencing parameters consisted of the width of timber beam, the thickness of the concrete slab and the timber board. Based on the numerical results, the effects of these parameters on fire resistance of TCC beams were investigated in detail. The results showed that modeling results agreed well with test results, and verified the reliability of the finite element model. The width of the timber beam had a significant influence on the fire resistance of TCC beams. The fire resistance of TCC beams would be enhanced by increasing the width of timber beam, the thickness of concrete slab and the timber board.

76 FR 9962 - Surety Bond Guarantee Program; Timber Sales

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-23

... and performance bonds for timber sale contracts awarded by the Federal Government or other public and... that the exception for timber sale contracts applies only to bid and performance bonds. Bid bonds are..., except for contracts in connection with bid and performance bonds for the sale of timber and/or other...

Aggregate Timber Supply: From the Forest to the Market

Treesearch

David N. Wear; Subhrendu K. Pattanayak

2003-01-01

Timber supply modeling is a means of formalizing the production behavior of heterogeneous landowners managing a wide variety of forest types and vintages within a region. The critical challenge of timber supply modeling is constructing theoretically valid and empirically practical aggregate descriptions of harvest behavior. Understanding timber supply is essential for...

Timber resource statistics for eastern Washington, 1995.

Treesearch

Neil McKay; Patricia M. Bassett; Colin D. MacLean

1995-01-01

This report summarizes a 1990-91 timber resource inventory of Washington east of the crest of the Cascade Range. The inventory was conducted on all private and public lands except National Forests. Timber resource statistics from National Forest inventories also are presented. Detailed tables provide estimates of forest area, timber volume, growth, mortality, and...

43 CFR 2812.0-6 - Statement of policy.

Code of Federal Regulations, 2013 CFR

2013-10-01

... to timber roads. (b) It is well established that the value of standing timber is determined in... road available for access to all the mature and overmature timber it could tap leads to economic waste. Blocks of timber which are insufficient in volume or value to support the construction of a duplicating...

43 CFR 2812.0-6 - Statement of policy.

Code of Federal Regulations, 2012 CFR

2012-10-01

... to timber roads. (b) It is well established that the value of standing timber is determined in... road available for access to all the mature and overmature timber it could tap leads to economic waste. Blocks of timber which are insufficient in volume or value to support the construction of a duplicating...

A second look a North Dakota's timber lands, 1980.

Treesearch

Pamela J. Jakes; W. Brad Smith

1982-01-01

The second inventory of North Dakota forest resources shows a decline in commercial forest area between 1954 and 1980. Presented are text and statistics on forest area and timber volume, growth, mortality, ownership, stocking, future timber supply, timber use, forest management opportunities, and nontimber forest resources. A forest type map is included.

Wisconsin's 1968 timber resource--a perspective.

Treesearch

John S. Jr. Spencer; Harry W. Thorne

1972-01-01

The third inventory of Wisconsin's timber resource shows substantial gains in growing-stock and sawtimber volumes since 1956, in spite of a small decline in area of commercial forest land. Presented are text and statistics on forest area and timber volume, growth, mortality, ownership, stocking, and use in 1968. Two 30-year projections of timber growth, removals...

36 CFR 221.3 - Disposal of national forest timber according to management plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Disposal of national forest timber according to management plans. 221.3 Section 221.3 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE TIMBER MANAGEMENT PLANNING § 221.3 Disposal of national forest timber...

An economic analysis of mine-timber marketing in West Virginia

Treesearch

Henry H. Webster

1956-01-01

Coal mines have long provided a major outlet for the timber products of West Virginia. Although the structure and operation of mine-timber markets is little understood, the efficiency of the marketing system undoubtedly affects the decisions of most of the 130,000 farm and other private timber-growing enterprises in the state.

46 CFR 42.25-20 - Computation for freeboard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... freeboard. (a) The minimum summer freeboards must be computed in accordance with §§ 42.20-5 (a) and (b), 42... the summer timber freeboard one thirty-sixth of the molded summer timber draft. (c) The winter North...(d)(1). (d) The tropical timber freeboard shall be obtained by deducting from the summer timber...

46 CFR 42.25-20 - Computation for freeboard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... freeboard. (a) The minimum summer freeboards must be computed in accordance with §§ 42.20-5 (a) and (b), 42... the summer timber freeboard one thirty-sixth of the molded summer timber draft. (c) The winter North...(d)(1). (d) The tropical timber freeboard shall be obtained by deducting from the summer timber...

46 CFR 42.25-20 - Computation for freeboard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... freeboard. (a) The minimum summer freeboards must be computed in accordance with §§ 42.20-5 (a) and (b), 42... the summer timber freeboard one thirty-sixth of the molded summer timber draft. (c) The winter North...(d)(1). (d) The tropical timber freeboard shall be obtained by deducting from the summer timber...

46 CFR 42.25-20 - Computation for freeboard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... freeboard. (a) The minimum summer freeboards must be computed in accordance with §§ 42.20-5 (a) and (b), 42... the summer timber freeboard one thirty-sixth of the molded summer timber draft. (c) The winter North...(d)(1). (d) The tropical timber freeboard shall be obtained by deducting from the summer timber...

46 CFR 42.25-20 - Computation for freeboard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... freeboard. (a) The minimum summer freeboards must be computed in accordance with §§ 42.20-5 (a) and (b), 42... the summer timber freeboard one thirty-sixth of the molded summer timber draft. (c) The winter North...(d)(1). (d) The tropical timber freeboard shall be obtained by deducting from the summer timber...

Timber resource of Missouri's Southwest Ozarks.

Treesearch

Patrick D. Miles

1990-01-01

Timber inventory report for twelve county area in southwest Missouri. Forest land comprises approximately half the land area of these counties. Timber removals are less than half of growth. Timber volume and growth continue to increase as large areas of regenerated stands achieve sawtimber size. Highlights and statistics are presented on area, volume, growth,...

Wisconsin timber industry--an assessment of timber product output and use.

Treesearch

James E. Blyth; James W. Whipple; W. Brad Smith

1989-01-01

Discusses recent Wisconsin forest industry trends, production and receipts of pulpwood, saw logs, and veneer logs, and production of other timber products in 1986. Reports on logging residue, on timber removals, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

Timber management planning with timber ram and goal programming

Treesearch

Richard C. Field

1978-01-01

By using goal programming to enhance the linear programming of Timber RAM, multiple decision criteria were incorporated in the timber management planning of a National Forest in the southeastern United States. Combining linear and goal programming capitalizes on the advantages of the two techniques and produces operationally feasible solutions. This enhancement may...

Regional cost information for private timberland conversion and management.

Treesearch

Lucas S Bair; Ralph J. Alig

2006-01-01

Cost of private timber management practices in the United States are identified, and their relationship to timber production in general is highlighted. Costs across timber-producing regions and forest types are identified by forest type and timber management practices historically applied in each region. This includes cost estimates for activities such as forest...

Opportunity costs of carbon sequestration in a forest concession in central Africa.

PubMed

Ndjondo, Michel; Gourlet-Fleury, Sylvie; Manlay, Raphaël J; Engone Obiang, Nestor Laurier; Ngomanda, Alfred; Romero, Claudia; Claeys, Florian; Picard, Nicolas

2014-12-01

A large proportion of the tropical rain forests of central Africa undergo periodic selective logging for timber harvesting. The REDD+ mechanism could promote less intensive logging if revenue from the additional carbon stored in the forest compensates financially for the reduced timber yield. Carbon stocks, and timber yields, and their associated values, were predicted at the scale of a forest concession in Gabon over a project scenario of 40 yr with reduced logging intensity. Considering that the timber contribution margin (i.e. the selling price of timber minus its production costs) varies between 10 and US$40 m -3 , the minimum price of carbon that enables carbon revenues to compensate forgone timber benefits ranges between US$4.4 and US$25.9/tCO 2 depending on the management scenario implemented. Where multiple suppliers of emission reductions compete in a REDD+ carbon market, tropical timber companies are likely to change their management practices only if very favourable conditions are met, namely if the timber contribution margin remains low enough and if alternative management practices and associated incentives are appropriately chosen.

BIBLIOGRAPHIC GUIDE FOR ADVANCED PLACEMENT, CHEMISTRY.

ERIC Educational Resources Information Center

WILLIAMS, HARRY; KING, CLYDE

REFERENCES AND AUDIOVISUAL MATERIALS ARE LISTED IN THIS GUIDE FOR SECONDARY SCHOOL ADVANCED PLACEMENT CHEMISTRY TEACHERS AND LIBRARIANS. BOOKS, PERIODICALS, WALL CHARTS, FILMS, AND FILMSTRIPS ARE INCLUDED. CITATIONS ARE COMPLETE AND INCLUDE INFORMATION PERTINENT TO THE ACQUISITION OF THE MATERIALS. (AG)

Minnesota forest statistics, 1977.

Treesearch

Pamela J. Jakes

1980-01-01

Presents highlights and statistics from the Fourth Minnesota Forest Inventory. Includes detailed tables of forest area, timber volume, net annual growth, timber removals, mortality, and timber products output.

31 CFR 593.510 - Transactions related to the importation of any round log or timber product originating in Liberia...

Code of Federal Regulations, 2010 CFR

2010-07-01

... importation of any round log or timber product originating in Liberia authorized. 593.510 Section 593.510... importation of any round log or timber product originating in Liberia authorized. Except as otherwise... into the United States of any round log or timber product originating in Liberia are authorized. ...

Forensic timber identification: It's time to integrate disciplines to combat illegal logging

Treesearch

Eleanor E. Dormontt; Markus Boner; Birgit Braun; Gerhard Breulmann; Bernd Degen; Edgard Espinoza; Shelley Gardner; Phil Guillery; John C. Hermanson; Gerald Koch; Soon Leong Lee; Milton Kanashiro; Anto Rimbawanto; Darren Thomas; Alex C. Wiedenhoeft; Yafang Yin; Johannes Zahnen; Andrew J. Lowe

2015-01-01

The prosecution of illegal logging crimes is hampered by a lack of available forensic timber identification tools, both for screening of suspectmaterial and definitive identification of illegally sourcedwood. Reputable timber traders are also struggling to police their own supply chains and comply with the growing requirement for due diligence with respect to timber...

Fiber stress values for design of glulam timber utility structures

Treesearch

R. Hernandez; R. C. Moody; R. H. Falk

In this study, we developed a simple equation to calculate average fiber stress values for design of glued-laminated (glulam) timber utility structures as a function of design bending stress. We took design stress in bending values specified by the American Institute of Timber Construction (AITC) for various combinations of glulam timber, applied appropriate end-use...

Pennsylvania timber industries - a periodic assessment of timber output

Treesearch

James T. Bones; John K., Jr. Sherwood

1978-01-01

A periodic evaluation of statewide industrial timber output based on a survey of the primary wood-manufacturing plants in Pennsylvania. Contains statistics on the industrial timber harvest and plant wood-receipts in 1976, and the production and disposition of the manufacturing residues that resulted. The 166 million cubic feet of industrial wood produced in 1976...

The aggregate timberland assessment system—ATLAS: a comprehensive timber projection model.

Treesearch

J.R. Mills; J.C. Kincaid

1992-01-01

The aggregate timberland assessment system is a time-based deterministic timber projection model. It was developed by the USDA Forest Service to address broad policy questions related to future timber supplies for the 1989 Renewable Resources Planning Act timber assessment. An open framework design allows for customizing inputs to account for regional and subregional...

SPATS: a model for projecting softwood timber inventories in the Southern United States.

Treesearch

David J. Brooks

1987-01-01

The yield-table projection method for modeling the development of regional timber inventories is outlined, and its application to softwood timber types in the Southern United States is described. Problems of simulating forest management practices and natural succession are discussed. A computer model that projects softwood timber inventories using yield-table...

Substitution and the USDA Forest Service log export restrictions.

Treesearch

Gary R. Lindell

1980-01-01

With some exceptions, the substitution of national forest timber for exported private timber is forbidden by regulations. Certain firms may use a limited amount of national forest timber as replacement for exported private timber, however, in accordance with their pattern of purchases and exports from 1971 through 1973. About 359 million board feet of national forest...

The 2005 RPA timber assessment update.

Treesearch

Richard W. Haynes; Darius M. Adams; Ralph J. Alig; Peter J. Ince; John R. Mills; Xiaoping. Zhou

2007-01-01

This update reports changes in the Nation's timber resource since the Analysis of the Timber Situation in the United States was completed in 2003. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These trends include changes in the U.S. economy, increased salvage of British Columbia beetle-killed...

43 CFR 5511.1-1 - Free use of timber on mineral and nonmineral public lands.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Free use of timber on mineral and... Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.1-1 Free use of timber on mineral and nonmineral public...

43 CFR 5511.1-1 - Free use of timber on mineral and nonmineral public lands.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Free use of timber on mineral and... Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.1-1 Free use of timber on mineral and nonmineral public...

43 CFR 5511.1-1 - Free use of timber on mineral and nonmineral public lands.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Free use of timber on mineral and... Lands (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.1-1 Free use of timber on mineral and nonmineral public...

Ohio timber industries - a periodic assessment of timber output

Treesearch

Robert L., Jr. Nevel; Robert B. Redett

1980-01-01

A periodic evaluation of industrial timber output in Ohio based on a statewide survey of the primary wood manufacturing plants. Contains statistics on the industrial timber harvest and plant wood receipts in 1978, and the production and disposition of the manufacturing residues that resulted. The 74 million cubic feet (ft³) or 2.2 million cubic meters (m...

7. VIEW OF TRICOMPOSITE ROOF STRUCTURE. TOP CHORDS ARE TIMBER. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. VIEW OF TRICOMPOSITE ROOF STRUCTURE. TOP CHORDS ARE TIMBER. TENSION RODS (THIN METAL RODS EXTENDING DIAGONALLY FROM THE HORIZONTAL TIMBER BRACE) ARE WROUGHT IRON. SOLID CRUCIFORM SHAPED COMPRESSION MEMBERS EXTENDING DOWNWARD FROM THE TIMBER TOP CHORD ARE MADE OF CAST IRON - North Central Railroad, Baltimore Freight House, Guilford & Centre Streets, Baltimore, Independent City, MD

36 CFR 223.14 - Where timber may be cut.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Where timber may be cut. 223... AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER General Provisions § 223.14 Where timber may be cut. (a) The cutting of trees, portions of trees or other forest products may be authorized on any National...

The Southern Timber Market to 2040

Treesearch

Jeffrey P. Prestemon; Robert C. Abt

2002-01-01

Timber market analysis of the South's predominantly private timberland finds that the 13 southern states produce nearly 60 percent of the nation's timber, an increase from the mid-1900s. Projections with the Subregional Timber Supply model show that, despite a 67 percent increase in the area of pine plantations, the South will experience a 2 percent decline...

31 CFR 593.205 - Prohibition on the importation of any round log or timber product originating in Liberia.

Code of Federal Regulations, 2012 CFR

2012-07-01

... round log or timber product originating in Liberia. 593.205 Section 593.205 Money and Finance: Treasury... on the importation of any round log or timber product originating in Liberia. Except as otherwise... section, the importation into the United States, directly or indirectly, of any round log or timber...

31 CFR 593.205 - Prohibition on the importation of any round log or timber product originating in Liberia.

Code of Federal Regulations, 2013 CFR

2013-07-01

... round log or timber product originating in Liberia. 593.205 Section 593.205 Money and Finance: Treasury... on the importation of any round log or timber product originating in Liberia. Except as otherwise... section, the importation into the United States, directly or indirectly, of any round log or timber...

31 CFR 593.205 - Prohibition on the importation of any round log or timber product originating in Liberia.

Code of Federal Regulations, 2014 CFR

2014-07-01

... round log or timber product originating in Liberia. 593.205 Section 593.205 Money and Finance: Treasury... on the importation of any round log or timber product originating in Liberia. Except as otherwise... section, the importation into the United States, directly or indirectly, of any round log or timber...

31 CFR 593.205 - Prohibition on the importation of any round log or timber product originating in Liberia.

Code of Federal Regulations, 2011 CFR

2011-07-01

... round log or timber product originating in Liberia. 593.205 Section 593.205 Money and Finance: Treasury... on the importation of any round log or timber product originating in Liberia. Except as otherwise... section, the importation into the United States, directly or indirectly, of any round log or timber...

31 CFR 593.510 - Transactions related to the importation of any round log or timber product originating in Liberia...

Code of Federal Regulations, 2012 CFR

2012-07-01

... importation of any round log or timber product originating in Liberia authorized. 593.510 Section 593.510... importation of any round log or timber product originating in Liberia authorized. Except as otherwise... into the United States of any round log or timber product originating in Liberia are authorized. ...

Trends in Timber Use and Product Recovery in New York

Treesearch

Eric H. Wharton; Thomas W. Birch; Thomas W. Birch

1999-01-01

High demand for a variety of timber products from New York's forests has stimulated increased timber utilization and product recovery. Utilization studies in New York suggest that the recovery of timber has improved over the years. Although current methods of multiproduct harvesting have improved recovery of residual material, an estimated 38.6 million cubic feet...

Missouri timber industry - an assessment of timber product output and use, 2003

Treesearch

Thomas B. Treiman; Ronald J. Piva

2005-01-01

Discusses recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, cooperage, and other timber products in 2003. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood-using mills and on disposition of mill...

Missouri timber industry--an assessment of timber product output and use, 2000.

Treesearch

Ronald J. Piva; Thomas B. Treiman

2003-01-01

Discusses recent Missouri forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, cooperage, and other timber products in 2000. Reports in logging residue generated from other timber harvest operations. Also reports on wood and bark residue generated at primary wood-using mills and on disposition of...

Alternative silvicultural practices in Appalachian forest ecosystems: implications for species diversity, ecosystem resilience, and commercial timber production

Treesearch

Thomas R. Fox; Carola A. Haas; David W. Smith; David L. Loftis; Shepard M. Zedaker; Robert H. Jones; A.L. Hammett

2007-01-01

Increasing demands for timber and non-timber forest products often conflict with demands to maintain biodiversity and ecosystem processes. To examine tradeoffs between these goals, we implemented six alternative management systems using a stand-level, replicated experiment. The treatments included four silvicultural regeneration methods designed to sustain timber...

Impacts on South Carolina timber production over the last five decades.

Treesearch

Jinglong Mo; Thomas Straka; Richard Harper

2013-01-01

Timberland ownership patterns and national forest timber harvesting policy have undergone significant changes in South Carolina over the past five decades. Timber output studies for the state commonly focused on short time frames and seldom addressed timberland ownership patterns in detail. We describe fifty-year timber output for South Carolina, allowing us to address...

Tongass National Forest timber demand: projections for 2015 to 2030

Treesearch

Jean M. Daniels; Michael D. Paruszkiewicz; Susan J. Alexander

2016-01-01

Projections of Alaska timber products output; the derived demand for logs, lumber, residues, and niche products; and timber harvest by owner were developed using a trend-based analysis. This is the fifth such analysis performed since 1990 to assist planners in meeting statutory requirements for estimating planning-cycle demand for timber from the Tongass National...

Michigan timber industry: An assessment of timber product output and use, 2004

Treesearch

David E. Haugen; Anthony K. Weatherspoon

2010-01-01

Reports forest-industry trends, production and receipts of industrial roundwood, and production of saw logs, veneer logs, excelsior/shavings, and other products for Michigan's timber industry in 2004. Also reports logging residue generated from timber harvest operations in Michigan as well as the generation and disposition of wood and bark residue generated by...

Georgia's timber, 1972

Treesearch

Herbert A. Knight; Joe P. McClure

1974-01-01

The fourth survey of Georgia's timber resource, completed in November 1972, shows improved timber supplies across most of the State since 1961. Inventory volume increased from 19.6 to 25.3 billion cubic feet, or by 29 percent. A group of counties south of the Altamaha river in Southeast Georgia was the only extensive area which experienced a reduction in timber...

Recommendations for sustainable development of non-timber forest products

Treesearch

Gina H. Mohammed

2001-01-01

Non-timber forest products--or NTFPs--are considered here to be botanical products harvested or originating from forest-based species, but excluding primary timber products, industrial boards and composites, and paper products. A recent study of non-timber forest products in Ontario, Canada, identified at least 50 types of NTFPs and hundreds of specific products used...

Timber resource statistics for timberland outside National Forests in eastern Oregon.

Treesearch

Neil McKay; Gary J. Lettman; Mary A. Mei

1994-01-01

This report summarizes a 1992 timber resource inventory Of timberland outside National Forests in eastern Oregon. The report presents statistical tables of timberland area, timber volume, growth, mortality, and harvest. It also displays tables of revised 1986-87 timber resource statistics for timberland outside National Forests; the 1992 and 1986-87 tables may be...

An Analysis of the Load-Bearing Capacity of Timber-Concrete Composite Beams with Profiled Sheeting

NASA Astrophysics Data System (ADS)

Szumigała, Maciej; Szumigała, Ewa; Polus, Łukasz

2017-12-01

This paper presents an analysis of timber-concrete composite beams. Said composite beams consist of rectangular timber beams and concrete slabs poured into the steel sheeting. The concrete slab is connected with the timber beam using special shear connectors. The authors of this article are trying to patent these connectors. The article contains results from a numerical analysis. It is demonstrated that the type of steel sheeting used as a lost formwork has an influence on the load-bearing capacity and stiffness of the timber-concrete composite beams.

Below-cost timber sales and the political marketplace

NASA Astrophysics Data System (ADS)

Cortner, Hanna J.; Schweitzer, Dennis L.

1993-01-01

Political pressures exist to increase the economic efficiency of timber management and production on the national forests managed by the USDA Forest Service. There is growing belief both outside and within the Forest Service that current levels of timber production, and most particularly uneconomic timber production, should be reduced. Many argue that eliminating uneconomic timber management programs will both save money and reduce environmental degradation. This article traces the political evolution of the focus on economic efficiency in timber production and explores the political-institutional factors that are shaping the current policy debate. The below-cost issue is less about economic efficiency than it is about political advantage and alternative political visions of the societal role of the nation's national forests now and in the future.

Neural coding in barrel cortex during whisker-guided locomotion

PubMed Central

Sofroniew, Nicholas James; Vlasov, Yurii A; Hires, Samuel Andrew; Freeman, Jeremy; Svoboda, Karel

2015-01-01

Animals seek out relevant information by moving through a dynamic world, but sensory systems are usually studied under highly constrained and passive conditions that may not probe important dimensions of the neural code. Here, we explored neural coding in the barrel cortex of head-fixed mice that tracked walls with their whiskers in tactile virtual reality. Optogenetic manipulations revealed that barrel cortex plays a role in wall-tracking. Closed-loop optogenetic control of layer 4 neurons can substitute for whisker-object contact to guide behavior resembling wall tracking. We measured neural activity using two-photon calcium imaging and extracellular recordings. Neurons were tuned to the distance between the animal snout and the contralateral wall, with monotonic, unimodal, and multimodal tuning curves. This rich representation of object location in the barrel cortex could not be predicted based on simple stimulus-response relationships involving individual whiskers and likely emerges within cortical circuits. DOI: http://dx.doi.org/10.7554/eLife.12559.001 PMID:26701910

Recent developments in guided wave travel time tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zon, Tim van; Volker, Arno

The concept of predictive maintenance using permanent sensors that monitor the integrity of an installation is an interesting addition to the current method of periodic inspections. Guided wave tomography had been developed to create a map of the wall thickness using the travel times of guided waves. It can be used for both monitoring and for inspection of pipe-segments that are difficult to access, for instance at the location of pipe-supports. An important outcome of the tomography is the minimum remaining wall thickness, as this is critical in the scheduling of a replacement of the pipe-segment. In order to improvemore » the sizing accuracy we have improved the tomography scheme. A number of major improvements have been realized allowing to extend the application envelope to pipes with a larger wall thickness and to larger distances between the transducer rings. Simulation results indicate that the sizing accuracy has improved and that is now possible to have a spacing of 8 meter between the source-ring and the receiver-ring. Additionally a reduction of the number of sensors required might be possible as well.« less

Rocket-inspired tubular catalytic microjets with grating-structured walls as guiding empennages.

PubMed

Huang, Gaoshan; Wang, Jiyuan; Liu, Zhaoqian; Zhou, Dekai; Tian, Ziao; Xu, Borui; Li, Longqiu; Mei, Yongfeng

2017-12-07

Controllable locomotion in the micro-/nanoscale is challenging and attracts increasing research interest. Tubular microjets self-propelled by microbubbles are intensively investigated due to their high energy conversion efficiency, but the imperfection of the tubular geometry makes it harder to realize linear motion. Inspired by the macro rocket, we designed a tubular microjet with a grating-structured wall which mimics the guiding empennage of the macro rocket, and we found that the fluid can be effectively guided by the grooves. Both theoretical simulation and experimental work have been carried out, and the obtained results demonstrate that the stability margin of the grating-structured microjet can be enhanced. Compared with microjets with smooth walls, the structured microjets show an enhanced ability of moving linearly. In 10% H 2 O 2 , only 20% of the smooth microjets demonstrate linear trajectories, while 80% of the grating-structured microjets keep moving straight. The grating-structured microjet can maintain linear motion under external disturbance. We further propose to increase the stability by introducing a helical grating structure.

Development of a six-year research needs assessment for timber transportation structures

Treesearch

Terry J. Wipf; Michael A. Ritter; Sheila Rimal Duwadi; Russell C. Moody

1993-01-01

A timber bridge, once a thing of the past, is now becoming a thing of the present. Interest in timber bridges and other transportation structures has been rapidly increasing. Much of this is due to new technologies in design and construction as well as advances in material manufacturing and presevative treatments. Although timber bridges and other transportation...

South Dakota timber industry--an assessment of timber product output and use, 2004

Treesearch

Ronald J. Piva; Gregory J. Josten; Richard D. Mayko

2006-01-01

Discusses recent South Dakota forest industry trends; production and receipts of industrial roundwood; production of saw logs in 2004; and compares 2004 production and receipts with the results of the 1999 timber product output study. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood-...

Guidelines for design, installation, and maintenance of a waterproof wearing surface for timber bridge decks

Treesearch

Richard E. Weyers; Joseph R. Loferski; J. Daniel Dolan; John E. Haramis; Joseph H. Howard; Lola Hislop

2001-01-01

To enhance long-term timber bridge performance, timber material must be protected from moisture. Wearing surfaces made of asphalt pavement with and without a waterproof membrane have been used to provide protection from moisture on timber decks. This type of wearing surface also protects the deck from other damage while providing a smooth, skid-resistant surface....

How might FIA deliver more information on status and trends of non-timber forest products?

Treesearch

Stephen P. Prisley

2015-01-01

Data from the Forest Inventory and Analysis program (including the Timber Products Output portion) are critical for assessing the sustainability of US timber production. Private sector users of this information rely on it for strategic planning, and their strong support of the FIA program has helped to ensure funding and program viability. Non-timber forest products...

The timber industries of New Hampshire and Vermont: a periodic assessment of timber output

Treesearch

Robert L., Jr. Nevel; Nicolas Engalichev; William C. Gove

1986-01-01

This periodic evaluation of statewide industrial timber output is based on canvasses of the primary wood manufacturing plants in New Hampshire and Vermont. The report contains statistics on industrial timber products and plant wood receipts in 1982, and the production and disposition of the manufacturing plant residues that resulted. The 129.4 million cubic feet (3.7...

Maine timber industries - a periodic assessment of timber output

Treesearch

Robert L., Jr. Nevel; Peter R. Lammert; Richard H. Widmann

1985-01-01

This periodic evaluation of statewide industrial timber output is based on a survey of the primary wood manufacturing plants located in Maine in 1981. It contains statistics on industrial timber harvest and plant wood reciepts and on the production and disposition of the manufacturing residues for the year. The 438.7 million ft? (12.4 million m?) of industrial...

California’s forest products industry and timber harvest, 2006

Treesearch

Todd A. Morgan; Jason P. Brandt; Kathleen E. Songster; Charles E. Keegan; Glenn A. Christensen

2012-01-01

This report traces the flow of California’s 2006 timber harvest through the primary wood products industry (i.e., firms that process timber into manufactured products such as lumber, as well as facilities such as pulp mills and particleboard plants, which use the wood fiber or mill residue directly from timber processors) and provides a description of the structure,...

The 1993 timber assessment market model: structure, projections, and policy simulations.

Treesearch

Darius M. Adams; Richard W. Haynes

1996-01-01

The 1993 timber assessment market model (TAMM) is a spatial model of the solidwood and timber inventory elements of the U.S. forest products sector. The TAMM model provides annual projections of volumes and prices in the solidwood products and sawtimber stumpage markets and estimates of total timber harvest and inventory by geographic region for periods of up to 50...

43 CFR 5511.1-1 - Free use of timber on mineral and nonmineral public lands.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Free use of timber on mineral and... USE OF TIMBER Free Use Regulations § 5511.1-1 Free use of timber on mineral and nonmineral public... public lands as follows: (1) Mineral lands, unoccupied and unreserved and not subject to entry under...

Timber resource statistics of the northern interior resource area of California.

Treesearch

Perry Colclasure; Joel Moen; Charles L. Bolsinger

1986-01-01

This report is one of five that provide timber resource statistics for 57 of the 58 counties in California (San Francisco is excluded). This report presents statistics from a 1981-84 inventory of the timber resources of Lassen, Modoc, Shasta, Siskiyou, and Trinity Counties. Tables presented are of forest area and of timber volume, growth, and mortality. Timberland area...

Timber resource statistics of the north coast resource area of California.

Treesearch

J.D. Lloyd; Joel Moen; Charles L. Bolsinger

1986-01-01

This report is one of five that provide timber resource statistics for 57 of the 58 counties in California (San Francisco is excluded). This report presents statistics from a 1981-84 inventory of the timber resources of Del Norte, Humboldt, Mendocino, and Sonoma Counties. Tables presented are of forest area and of timber volume, growth, and mortality. The north coast...

Use of prismatic films to control light distribution

NASA Technical Reports Server (NTRS)

Kneipp, K. G.

1994-01-01

Piping light for illumination purposes is a concept which has been around for a long time. In fact, it was the subject of an 1881 United States patent which proposed the use of mirrors inside a tube to reflect light from wall to wall down the tube. The use of conventional mirrors for this purpose, however, has not worked because mirrors do not reflect well enough. On the other hand, optical fibers composed of certain glasses or plastics are known to transport light much more efficiently. The light that enters is reflected back and forth within the walls of the fiber until it reaches the other end. This is possible by means of a principle known as 'total internal reflection'. No light escapes through the walls and very little is absorbed in the bulk of the fiber. However, while optical fibers are very efficient in transporting light, they are impractical for transporting large quantities of light. Lorne Whitehead, as a student at the University of British Columbia, recognized that prismatic materials could be used to create a 'prism light guide', a hollow structure that can efficiently transport large quantities of light. This invention is a pipe whose transparent walls are formed on the outside into precise prismatic facets. The facets are efficient total internal reflection mirrors which prevent light travelling down the guide from escaping. Very little light is absorbed by the pipe because light travels primarily in the air space within the hollow guide. And, because the guide is hollow, weight and cost factors are much more favorable than would be the case with very large solid fibers. Recent advances in precision micromachining, polymer processing, and certain other manufacturing technologies have made the development of OLF (Optical Lighting Film) possible. The process is referred to as 'microreplication' and has been found to have broad applicability in a number of diverse product areas.

Magnetic domain walls as reconfigurable spin-wave nano-channels

NASA Astrophysics Data System (ADS)

Wagner, Kai

Research efforts to utilize spin waves as information carriers for wave based logic in micro- and nano-structured ferromagnetic materials have increased tremendously over the recent years. However, finding efficient means of tailoring and downscaling guided spin-wave propagation in two dimensions, while maintaining energy efficiency and reconfigurability, still remains a delicate challenge. Here we target these challenges by spin-wave transport inside nanometer-scaled potential wells formed along magnetic domain walls. For this, we investigate the magnetization dynamics of a rectangular-like element in a Landau state exhibiting a so called 180° Néel wall along its center. By microwave antennae the rf-excitation is constricted to one end of the domain wall and the spin-wave intensities are recorded by means of Brillouin-Light Scattering microscopy revealing channeled transport. Additional micromagnetic simulations with pulsed as well as cw-excitation are performed to yield further insight into this class of modes. We find several spin-wave modes quantized along the width of the domain wall yet with well defined wave vectors along the wall, exhibiting positive dispersion. In a final step, we demonstrate the flexibility of these spin-wave nano-channels based on domain walls. In contrast to wave guides realised by fixed geometries, domain walls can be easily manipulated. Here we utilize small external fields to control its position with nanometer precision over a micrometer range, while still enabling transport. Domain walls thus, open the perspective for reprogrammable and yet non-volatile spin-wave waveguides of nanometer width. Financial support by the Deutsche Forschungsgemeinschaft within project SCHU2922/1-1 is gratefully acknowledged.

Photographic technology development project: Timber typing in the Tahoe Basin using high altitude panoramic photography

NASA Technical Reports Server (NTRS)

Ward, J. F.

1981-01-01

Procedures were developed and tested for using KA-80A optical bar camera panoramic photography for timber typing forest land and classifying nonforest land. The study area was the south half of the Lake Tahoe Basin Management Unit. Final products from this study include four timber type map overlays on 1:24,000 orthophoto maps. The following conclusions can be drawn from this study: (1) established conventional timber typing procedures can be used on panoramic photography if the necessary equipment is available, (2) The classification and consistency results warrant further study in using panoramic photography for timber typing; and (3) timber type mapping can be done as fast or faster with panoramic photography than with resource photography while maintaining comparable accuracy.

Termites utilise clay to build structural supports and so increase foraging resources.

PubMed

Oberst, Sebastian; Lai, Joseph C S; Evans, Theodore A

2016-02-08

Many termite species use clay to build foraging galleries and mound-nests. In some cases clay is placed within excavations of their wooden food, such as living trees or timber in buildings; however the purpose for this clay is unclear. We tested the hypotheses that termites can identify load bearing wood, and that they use clay to provide mechanical support of the load and thus allow them to eat the wood. In field and laboratory experiments, we show that the lower termite Coptotermes acinaciformis, the most basal species to build a mound-nest, can distinguish unloaded from loaded wood, and use clay differently when eating each type. The termites target unloaded wood preferentially, and use thin clay sheeting to camouflage themselves while eating the unloaded wood. The termites attack loaded wood secondarily, and build thick, load-bearing clay walls when they do. The termites add clay and build thicker walls as the load-bearing wood is consumed. The use of clay to support wood under load unlocks otherwise unavailable food resources. This behaviour may represent an evolutionary step from foraging behaviour to nest building in lower termites.

Four Novel Cellulose Synthase (CESA) Genes from Birch (Betula platyphylla Suk.) Involved in Primary and Secondary Cell Wall Biosynthesis

PubMed Central

Liu, Xuemei; Wang, Qiuyu; Chen, Pengfei; Song, Funan; Guan, Minxiao; Jin, Lihua; Wang, Yucheng; Yang, Chuanping

2012-01-01

Cellulose synthase (CESA), which is an essential catalyst for the generation of plant cell wall biomass, is mainly encoded by the CesA gene family that contains ten or more members. In this study; four full-length cDNAs encoding CESA were isolated from Betula platyphylla Suk., which is an important timber species, using RT-PCR combined with the RACE method and were named as BplCesA3, −4, −7 and −8. These deduced CESAs contained the same typical domains and regions as their Arabidopsis homologs. The cDNA lengths differed among these four genes, as did the locations of the various protein domains inferred from the deduced amino acid sequences, which shared amino acid sequence identities ranging from only 63.8% to 70.5%. Real-time RT-PCR showed that all four BplCesAs were expressed at different levels in diverse tissues. Results indicated that BplCESA8 might be involved in secondary cell wall biosynthesis and floral development. BplCESA3 appeared in a unique expression pattern and was possibly involved in primary cell wall biosynthesis and seed development; it might also be related to the homogalacturonan synthesis. BplCESA7 and BplCESA4 may be related to the formation of a cellulose synthase complex and participate mainly in secondary cell wall biosynthesis. The extremely low expression abundance of the four BplCESAs in mature pollen suggested very little involvement of them in mature pollen formation in Betula. The distinct expression pattern of the four BplCesAs suggested they might participate in developments of various tissues and that they are possibly controlled by distinct mechanisms in Betula. PMID:23202892

Technical - Economic Research for Passive Buildings

NASA Astrophysics Data System (ADS)

Miniotaite, Ruta

2017-10-01

A newly constructed passive house must save 80 % of heat resources; otherwise it is not a passive house. The heating energy demand of a passive building is less than 15 kWh/m2 per year. However, a passive house is something more than just an energy-saving house. This concept involves sustainable, high-quality, valuable, healthy and durable construction. Features of a passive house: high insulation of envelope components, high-quality windows, good tightness of the building, regenerative ventilation system and elimination of thermal bridges. The Energy Performance of Buildings Directive (EPBD) 61 requires all new public buildings to become near-zero energy buildings by 2019 and will be extended to all new buildings by 2021. This concept involves sustainable, high-quality, valuable, healthy and durable construction. Foundation, walls and roofs are the most essential elements of a house. The type of foundation for a private house is selected considering many factors. The article examines technological and structural solutions for passive buildings foundation, walls and roofs. The technical-economic comparison of the main structures of a passive house revealed that it is cheaper to install an adequately designed concrete slab foundation than to build strip or pile foundation and the floor separately. Timber stud walls are the cheapest wall option for a passive house and 45-51% cheaper compared to other options. The comparison of roofs and ceilings showed that insulation of the ceiling is 25% more efficient than insulation of the roof. The comparison of the main envelope elements efficiency by multiple-criteria evaluation methods showed that it is economically feasible to install concrete slab on ground foundation, stud walls with sheet cladding and a pitched roof with insulated ceiling.

Timber Volume in Indiana, 1967.

Treesearch

Arnold J. Ostrom

1969-01-01

The recently completed Second Forest Survey of Indiana shows that the State's timber volume has increased by one-fourth in the 17 years since the previous survey. Timber volume by county is presented.

Timber products output and timber harvests in Alaska: projections for 2005-25

Treesearch

A. Brackley; T. Rojas; R. Haynes

2006-01-01

Projections of Alaska timber products output, the derived demand for logs and chips, and timber harvest by owner are developed by using a trend-based analysis. These are revised projections of those made in 1990, 1994, and 1997, and reflect the consequences of recent changes in the Alaska forest sector and trends in markets for Alaska products. With the cancellation of...

Timber resource statistics for the Upper Yukon inventory unit, Alaska, 1980.

Treesearch

Willem W.S. van Hees

1987-01-01

The 1980 inventory of the forest resources of the Upper Yukon unit was designed to produce inventory estimates of timberland area, volume of timber, and volumes of timber growth and mortality. Timberland area is estimated at 742,000 acres. Cubic-foot volume on all timberland is estimated at 475 million cubic feet. Timber growth and mortality are estimated at -615,000...

Federal timber restrictions, interregional spillovers, and the impact on US softwood markets

Treesearch

David N. Wear; Brian C. Murray

2004-01-01

An econometric model of the US softwood lumber and timber markets is estimated and used to simulate the price, trade, and welfare effects of reductions in federal timber sales in the western US commencing in the late 1980s. Results indicate that the timber sale reductions increased lumber prices by roughly 15 percent in the mid-1990s. Lumber consumers were the...

1966 Oregon timber harvest.

Treesearch

Brian R. Wall

1967-01-01

The 1966 Oregon timber harvest totaled 8.9 billion board feet, 5 percent less than the harvest in 1965. During 1966, the total public timber harvest declined 10 percent to 4.8 billion board feet. The uncut volume of public timber under contract at the end of 1966 was 7.6 billion board feet, up 1.3 billion board feet from 1965's year end total. National Forest...

Review of alternative measures of softwood sawtimber prices in the United States

Treesearch

Henry Spelter

2005-01-01

This study compares prices from various timber market reports and an estimate of timber value derived from product-selling prices and manufacturing costs. In the South, two primary sources of timber price information are Forest2Market (F2M) and Timber Mart-South (TMS). Comparisons showed that F2M prices are generally higher than TMS prices for both stumpage and...

DETAIL VIEW, STRUCTURAL TIMBER AND FLOOR JOISTS, SOUTH GARRET. THIS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW, STRUCTURAL TIMBER AND FLOOR JOISTS, SOUTH GARRET. THIS TIMBER IS ONE OF TWO EXTENDING OUT FROM THE HOUSE AND JOINED TO VERTICAL POSTS LOCATED WITHIN THE WOOD TUSCAN COLUMNS LOCATED AT THE PORTICO’S TWO OUTER CORNERS. THE TIMBERS AND THE VISIBLE FLOOR JOISTS WERE PART OF THE HOUSE’S INITIAL CA. 1770 CONSTRUCTION - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

Condition Assessment of Iowa Timber Bridges Using Advanced Inspection Tools

Treesearch

Travis Hosteng; James Wacker; Brent Phares

2013-01-01

This paper reports the results of a study undertaken to assess the condition of timber bridges in the state of Iowa. This study was carried out as part of an overall national study spearheaded by the Forest Products Laboratory and FHWA to investigate the field performance of timber bridges throughout the United States. In the U.S., Iowa has the most timber bridge...

Field investigation of a 100-year-old timber crib foundation at a historic copper mine

Treesearch

James Wacker; Xiping Wang; Douglas R. Rammer

2010-01-01

In June 2009, the authors conducted a comprehensive on-site evaluation of the timber crib foundation at Alaska’s Historic Kennecott Mine Concentration Mill Building. The primary goal of the 6-day inspection was to assess the physical conditions of the existing timber crib foundation and identify timber members and areas that have structural deficiencies. The inspection...

Assessing the Non-Timber Value of Forests: A Revealed-Preference, Hedonic Model

Treesearch

Riccardo Scarpa; Joseph Buongiorno; Jiin-Shyang Hseu; Karen Lee Abt

2000-01-01

Based on revealed preference theory, the value of non-timber goods and services obtained by forest owners, private or public, should be at least equal to the difference between the value of what they could have cut had they tried to maximize timber revenues, and of what they actually cut. This definition was applied to estimate the non-timber value (NTV) of...

Timber products output and timber harvests in Alaska: projections for 1997-2010.

Treesearch

David J. Brooks; Richard W. Haynes

1997-01-01

Projections of Alaska timber products output, the derived demand for raw material, and timber harvest by owner are developed from a trend-based analysis. These projections are revisions of projections made in 1990 and again in 1994, and reflect the consequences of recent changes in the Alaska forest sector and long-term trends in markets for Alaska products. With the...

Markets, Government Policy, and China’s Timber Supply

Treesearch

Han Zhang; Joseph Buongiorno

2012-01-01

China’s domestic demand and exports of wood products are rising rapidly compared to domestic supply. The determinants of timber supply in China were investigated with panel data from 25 provinces from 1999 to 2009. The results indicated that China’s timber supply had responded to both market forces, reflected by timber prices largely determined by world demand and...

Oregon's forest products industry and timber harvest, 2003.

Treesearch

Jason P. Brandt; Todd A. Morgan; Thale Dillon; Gary J. Lettman; Charles E. Keegan; David L. Azuma

2006-01-01

This Report traces the flow of Oregon’s 2003 timber harvest through the primary timber-processing industry and describes its structure, operations and condition. Pulp and board, lumber, and plywood and veer sectors accounted for 96 percent of total industry sales of $6.7 billion. Oregon’s 2003 timber harvest of just over 4 billion board feet was 95 percent softwood...

Using TPO data to estimate timber demand in support of planning on the Tongass National Forest

Treesearch

Jean M. Daniels; Michael D. Paruszkiewicz; Susan J. Alexander

2015-01-01

Projections of Alaska timber products output, the derived demand for logs, lumber, residues, and niche products, and timber harvest by owner are developed by using a trend-based analysis. This is the fifth such analysis performed since 1990 to assist planners in meeting statutory requirements for estimating planning cycle demand for timber from the Tongass National...

Timber sale value as a function of sale characteristics and number of bidders

Treesearch

Paul E. Sendak; Paul E. Sendak

1991-01-01

Examines the effect of sale characteristics and number of bidders on sale value for timber sold by sealed-bid auction on the Green Mountain National Forest in Vermont. As anticipated from theory and previous empirical studies, increasing the number of bidders tended to increase the winning-bid value for the timber auctions studied. Efforts made to ensure that a timber...

The Timber Resource in Maryland

Treesearch

Northeastern Forest Experiment Station

1955-01-01

This is a report on the findings of the forest survey made in Maryland as part of the nationwide forest survey that is being carried on by the Forest Service, U.S. Department of Agriculture. It shows the area and condition of the forest land, the volume and quality of the standing timber, the rates of timber growth and mortality, and the extent of timber cutting for...

1966 Washington timber harvest.

Treesearch

Brian R. Wall

1967-01-01

The 1966 Washington timber harvest of 6.1 billion board feet was 6.8 percent below the 1965 level. This was the first decline since 1961. In part, the lower harvest in 1966 was due to completion of salvage logging of the 1962 blowdown. The volume of dead timber salvaged in 1966 was only 6 percent of the total, compared with 15 percent in 1965. The live timber harvest...

Measure Guideline: Deep Energy Enclosure Retrofit for Double-Stud Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loomis, H.; Pettit, B.

2015-06-01

This Measure Guideline describes a deep energy enclosure retrofit (DEER) solution that provides insulation to the interior of the wall assembly with the use of a double stud wall. The guide describes two approaches to retrofitting the existing the walls: one involving replacement of the existing cladding, and the other that leaves the existing cladding in place. It discusses the design principles related to the use of various insulation types, and provides strategies and procedures for implementing the double stud wall retrofit. It also evaluates important moisture-related and indoor air quality measures that need to be implemented to achieve amore » durable, high performance wall.« less

Cell Geometry Guides the Dynamic Targeting of Apoplastic GPI-Linked Lipid Transfer Protein to Cell Wall Elements and Cell Borders in Arabidopsis thaliana

PubMed Central

Wasteneys, Geoffrey

2013-01-01

During cellular morphogenesis, changes in cell shape and cell junction topology are fundamental to normal tissue and organ development. Here we show that apoplastic Glycophosphatidylinositol (GPI)-anchored Lipid Transfer Protein (LTPG) is excluded from cell junctions and flat wall regions, and passively accumulates around their borders in the epidermal cells of Arabidopsis thaliana. Beginning with intense accumulation beneath highly curved cell junction borders, this enrichment is gradually lost as cells become more bulbous during their differentiation. In fully mature epidermal cells, YFP-LTPG often shows a fibrous cellulose microfibril-like pattern within the bulging outer faces. Physical contact between a flat glass surface and bulbous cell surface induces rapid and reversible evacuation from contact sites and accumulation to the curved wall regions surrounding the contact borders. Thus, LTPG distribution is dynamic, responding to changes in cell shape and wall curvature during cell growth and differentiation. We hypothesize that this geometry-based mechanism guides wax-carrying LTPG to functional sites, where it may act to “seal” the vulnerable border surrounding cell-cell junctions and assist in cell wall fortification and cuticular wax deposition. PMID:24260561

Heat-stressed structural components in combustion-engine design

NASA Technical Reports Server (NTRS)

Kraemer, Otto

1938-01-01

Heated structural parts alter their shape. Anything which hinders free heat expansion will give rise to heat stresses. Design rules are thus obtained for the heated walls themselves as well as for the adjoining parts. An important guiding principle is that of designing the heat-conducting walls as thin as possible.

29 CFR 776.1 - General interpretative guides.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) constitutes an unfair method of competition in commerce; (d) leads to labor disputes burdening and obstructing... the legislative history of the Act, as amended. 8 7 Kirschbaum v. Walling, 316 U.S. 517; Walling v... decisions. Footnote reference to the legislative history of the 1949 amendments are made at points in this...

29 CFR 776.1 - General interpretative guides.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) constitutes an unfair method of competition in commerce; (d) leads to labor disputes burdening and obstructing... the legislative history of the Act, as amended. 8 7 Kirschbaum v. Walling, 316 U.S. 517; Walling v... decisions. Footnote reference to the legislative history of the 1949 amendments are made at points in this...

Timber Creek bunkhouse and mess hall, Rocky Mountain National Park. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Timber Creek bunkhouse and mess hall, Rocky Mountain National Park. Interior, kitchen and dining area, viewing north. - Timber Creek Bunkhouse & Mess Hall, Trail Ridge Road, Grand Lake, Grand County, CO

36 CFR 223.52 - Market-related contract term additions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Conditions and... to rapid deterioration, timber is in a wildland-urban interface area, or hazard trees adjacent to...

Timber resource statistics for southwest Washington.

Treesearch

Patricia M. Bassett; Daniel D. Oswald

1981-01-01

This report summarizes a 1978 timber-resource inventory of six counties in southwest Washington: Clark, Cowlitz, Lewis, Pacific, Skamania, and Wahkiakum. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Preliminary timber resource statistics for southwest Washington.

Treesearch

Colin D. MacLean; Janet L. Ohmann; Patricia M. Bassett

1991-01-01

This report summarizes a 1988 timber inventory of six counties in southwest Washington: Clark, Cowlitz, Lewis, Pacific, Skamania, and Wahkiakum. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

32 CFR 644.504 - Disposal plan for timber.

Code of Federal Regulations, 2010 CFR

2010-07-01

... disposal plan will be prepared which will include the following: (a) Live timber and merchantable dead... feet in log scale measurement; linear estimates of pole timber, and amount of cord wood. The appraiser...

Fire Resistance of Large-Scale Cross-Laminated Timber Panels

NASA Astrophysics Data System (ADS)

Henek, Vladan; Venkrbec, Václav; Novotný, Miloslav

2017-12-01

Wooden structures are increasingly being used in the construction of residential buildings. A common and often published reason to avoid wooden structures is their insufficient fire resistance, which reduces bearing capacity. For this reason, composite sandwich structures began to be designed to eliminate this drawback, as well as others. Recently, however, the trend is for a return to the original, wood-only variant and a search is underway for new technical means of improving the properties of such structures. Many timber structure technologies are known, but structures made from cross-laminated timber (CLT) panels have been used very often in recent years. CLT panels, also known as X-LAM, are currently gaining popularity in Europe. In the case of CLT panels composed of several layers of boards, they can be said to offer a certain advantage in that after the surface layer of a board has burnt and the subsurface layer has dried, oxygen is not drawn to the unburned wood for further combustion and thus the burning process ceases. CLT panels do not need to be specially modified or coated with fire resistant materials, although they are usually lined with gypsum-fibre fire resistant boards due to guidelines set out in the relevant standards. This paper presents a new method for the assessment of load-bearing perimeter walls fabricated from CLT panels without the use of an inner fire-retardant lining to ensure fire resistance at the level required by European standards (i.e. those harmonized for the Czech construction industry). The calculations were verified through laboratory tests which show that better parameters can be achieved during the classification of structures from the fire resistance point of view. The aim of the article is to utilize the results of assessment and testing by an accredited laboratory in order to demonstrate the possibilities of using CLT panels for the construction of multistorey as well as multi-purpose buildings in the Czech Republic.

Ranking independent timber investments by alternative investment criteria

Treesearch

Thomas J. Mills; Gary E. Dixon

1982-01-01

A sample of 231 independent timber investments were ranked by internal rate of return, present net worth per acre and the benefit cost ratio—the last two discounted by 3, 6.4. 7.5. and 10 percent—to determine if the different criteria had a practical influence on timber investment ranking. The samples in this study were drawn from a group of timber investments...

Hardwood timber sales on state forests in Indiana: characteristics influencing costs and prices

Treesearch

J. Michael Vasievich; W. L., Jr. Mills; Heidi R. Cherry

1997-01-01

Timber sales conducted on State-owned forests in INdiana from 1982 to 1994 were analyzed to determine changes in costs and prices and the effect of sale conditions on costs and prices. The data set included 445 sales that ranged in size from less than 1 acre to more than 500 acres. Sales were predominantly partial cuts in mature hardwood timber. Marked timber volume...

31 CFR 593.412 - Release of any round log or timber product originating in Liberia from a bonded warehouse or...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 3 2012-07-01 2012-07-01 false Release of any round log or timber... Interpretations § 593.412 Release of any round log or timber product originating in Liberia from a bonded... from a bonded warehouse or foreign trade zone of any round log or timber product originating in Liberia...

31 CFR 593.412 - Release of any round log or timber product originating in Liberia from a bonded warehouse or...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 3 2013-07-01 2013-07-01 false Release of any round log or timber... Interpretations § 593.412 Release of any round log or timber product originating in Liberia from a bonded... from a bonded warehouse or foreign trade zone of any round log or timber product originating in Liberia...

Effects of long-term prescribed burning on timber value in hardwood forests of the Missouri Ozarks

Treesearch

Benjamin O. Knapp; Joseph M. Marschall; Michael C. Stambaugh

2017-01-01

Prescribed fire is commonly used for restoring and managing oak woodlands but raises concern over the risk of value loss to timber products. We used a long-term prescribed burning study to quantify standing timber volume and stumpage value, fire scar presence and size, and timber value loss in comparison to unburned stands. Three study treatments were initiated in 1949...

Capital gains treatment of timber income: An economic assessment

Treesearch

Donald F. Dennis; Donald F. Dennis

1985-01-01

Treating timber income as capital gains meets the criteria used to evaluate tax systems better than treating it as ordinary income. Social welfare implications and impact on timber supply also favor such treatment.

Timber resource statistics for eastern Washington.

Treesearch

Patricia M. Bassett; Daniel D. Oswald

1983-01-01

This report summarizes a 1980 timber resource inventory of the 16 forested counties in Washington east of the crest of the Cascade Range. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Ownership change and timber supply on nonindustrial private forestland.

Treesearch

Eugene M. Carpenter

1985-01-01

Presents trends in private forest land ownership in Michigan's Upper Peninsula. Describes how changes in owners, their intentions, and their actions might affect the area's timber supply with implications for the national timber supply.

Time-of-flight dependency on transducer separation distance in a reflective-path guided-wave ultrasonic flow meter at zero flow conditions.

PubMed

Aanes, Magne; Kippersund, Remi Andre; Lohne, Kjetil Daae; Frøysa, Kjell-Eivind; Lunde, Per

2017-08-01

Transit-time flow meters based on guided ultrasonic wave propagation in the pipe spool have several advantages compared to traditional inline ultrasonic flow metering. The extended interrogation field, obtained by continuous leakage from guided waves traveling in the pipe wall, increases robustness toward entrained particles or gas in the flow. In reflective-path guided-wave ultrasonic flow meters (GW-UFMs), the flow equations are derived from signals propagating solely in the pipe wall and from signals passing twice through the fluid. In addition to the time-of-flight (TOF) through the fluid, the fluid path experiences an additional time delay upon reflection at the opposite pipe wall due to specular and non-specular reflections. The present work investigates the influence of these reflections on the TOF in a reflective-path GW-UFM as a function of transducer separation distance at zero flow conditions. Two models are used to describe the signal propagation through the system: (i) a transient full-wave finite element model, and (ii) a combined plane-wave and ray-tracing model. The study shows that a range-dependent time delay is associated with the reflection of the fluid path, introducing transmitter-receiver distance dependence. Based on these results, the applicability of the flow equations derived using model (ii) is discussed.

43 CFR 1815.1 - Timber sale contracts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Timber sale contracts. 1815.1 Section 1815.1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT....1 Timber sale contracts. ...

43 CFR 1815.1 - Timber sale contracts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Timber sale contracts. 1815.1 Section 1815.1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT....1 Timber sale contracts. ...

43 CFR 1815.1 - Timber sale contracts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Timber sale contracts. 1815.1 Section 1815.1 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT....1 Timber sale contracts. ...

Timber resources of northwest Oregon.

Treesearch

Mary A. Mei

1979-01-01

This report presents statistics from a 1976 timber resource inventory of 10 counties in northwest Oregon: Clackamas, Clatsop, Columbia, Hood River, Marion, Multnomah, Polk, Tillamook, Washington, and Yamhill. Tables presented are of forest area, timber volume, growth, mortality, and harvest.

The Timber Resources of Delaware. A Report on tbe Forest survey made by the U.S. Forest Service.

Treesearch

Roland H. Ferguson; Roland H. Ferguson

1959-01-01

This is a report on the findings of the first comprehensive survey of the timber resources of Delaware. It describes, as of 1957, the area and condition of the forest land, the volume of standing timber, the annual growth and mortality of the forest growing stock, and the extent of timber cutting. The survey made by the Forest Service, U.S. Department of Agriculture,...

Oregon's forest products industry and timber harvest 2013 with trends through 2014

Treesearch

Eric A. Simmons; Micah G. Scudder; Todd A. Morgan; Erik C. Berg; Glenn A. Christensen

2016-01-01

This report traces the flow of Oregon’s 2013 timber harvest through the primary wood products industry and provides detailed description of the structure, timber use, operations, and condition of Oregon’s forest products sector. It is the third in a series of reports that update the status of the industry every 5 years, and is based on a census of timber-using...

Feasibility Investigation into Strengthening of Timber Bridge Stringers

DTIC Science & Technology

2007-05-01

life . They exhibit several types of damage, which occurs in their structural elements such as timber stringers. The most commonly encountered damage...United States are nearing, or at the end of their service life , which means they exhibit several types of damage. This occurs mostly on structural... life of a timber bridge is approximately 30–40 years, the majority of timber bridges in the United States are nearing the end of their service life

High resolution PET breast imager with improved detection efficiency

DOEpatents

Majewski, Stanislaw

2010-06-08

A highly efficient PET breast imager for detecting lesions in the entire breast including those located close to the patient's chest wall. The breast imager includes a ring of imaging modules surrounding the imaged breast. Each imaging module includes a slant imaging light guide inserted between a gamma radiation sensor and a photodetector. The slant light guide permits the gamma radiation sensors to be placed in close proximity to the skin of the chest wall thereby extending the sensitive region of the imager to the base of the breast. Several types of photodetectors are proposed for use in the detector modules, with compact silicon photomultipliers as the preferred choice, due to its high compactness. The geometry of the detector heads and the arrangement of the detector ring significantly reduce dead regions thereby improving detection efficiency for lesions located close to the chest wall.

Hydraulic balancing of a control component within a nuclear reactor

DOEpatents

Marinos, D.; Ripfel, H.C.F.

1975-10-14

A reactor control component includes an inner conduit, for instance containing neutron absorber elements, adapted for longitudinal movement within an outer guide duct. A transverse partition partially encloses one end of the conduit and meets a transverse wall within the guide duct when the conduit is fully inserted into the reactor core. A tube piece extends from the transverse partition and is coaxially aligned to be received within a tubular receptacle which extends from the transverse wall. The tube piece and receptacle cooperate in engagement to restrict the flow and pressure of coolant beneath the transverse partition and thereby minimize upward forces tending to expel the inner conduit.

Status of downstream fish passage at hydroelectric projects in the northeast, USA

USGS Publications Warehouse

Odeh, Mufeed; Orvis, Curtis

1997-01-01

In the northeastern United States several guidance, protection, and conveyance methods have been employed to assist downstream migrating fish. Overlay racks, standard bar racks with close spacing, louvers, curtain walls, guide walls, netting, and other means have been used to guide and protect fish from entrainment. The design process of these facilities comprises consideration of various factors, including flow approach, attraction flow, guidance and protection devices, bypass location, conveyance mechanism, and plunge pool conditions. This paper presents the status of the design criteria for downstream fish passage facilities at hydroelectric sites in the northeast part of the United States. Examples of existing facilities are given.

26. INTERIOR VIEW SHOWING ROW OF TIMBER SUPPORT TOWERS BUILT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. INTERIOR VIEW SHOWING ROW OF TIMBER SUPPORT TOWERS BUILT AS TEMPORARY TRUSS REINFORCEMENT (NOTE STEEL STRUCTURES ATOP TIMBER BRACING) - Oakland Army Base, Transit Shed, East of Dunkirk Street & South of Burma Road, Oakland, Alameda County, CA

Field testing and evaluation of a demonstration timber bridge.

DOT National Transportation Integrated Search

2012-02-01

Asphalt wearing surfaces are commonly used on timber bridges with transverse glued-laminated deck panel systems to help protect the timber components. However, poor performance of these asphalt wearing surfaces in the past has resulted in repeated re...

Preliminary timber resource statistics for the Olympic Peninsula, Washington.

Treesearch

Colin D. MacLean; Janet L. Ohmann; Patricia M. Bassett

1991-01-01

This report summarizes a 1989 timber resource inventory of five counties in the Olympic Peninsula region of Washington: Clallam, Grays Harbor, Jefferson, Mason, and Thurston. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Timber Volume in Missouri Counties

Treesearch

Arnold J. Ostrom

1974-01-01

The third forest inventory of Missouri showed timber volume of growing-stock material reaching 76 million cords in 1972, an increase of 5 percent since 1959. The growing stock included 15 million board feet of sawtimber. Timber volume by county is presented.

Timber resource statistics for the Olympic Peninsula, Washington.

Treesearch

Patricia M. Bassett; Daniel D. Oswald

1961-01-01

This report summarizes a 1978-79 timber resource inventory of five counties in the Olympic Peninsula of Washington: Clallam, Grays Harbor, Jefferson, Mason, and Thurston. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Field evaluation of timber preservation treatments for highway applications.

DOT National Transportation Integrated Search

2007-12-01

Timber material repair and replacement cost for timber bridges is a considerable expense to highway agencies in Iowa, especially to : county road departments. To address these needs, the objectives of this investigation was to study the field effecti...

Glossary of Terms Used in Timber Harvesting and Forest Engineering

Treesearch

Bryce J. Stokes; Colin Ashmore; Cynthia L. Rawlins; Donald L. Sirois

1989-01-01

Provides definitions for 1,026 words and terms used in timber harvesting and forest engineering, with an emphasis on temrs related to timber harvesting operations. Terminology dealing with basic forestry, harvesting equipment, and economics is stressed.

Efficient Eucalypt Cell Wall Deconstruction and Conversion for Sustainable Lignocellulosic Biofuels.

PubMed

Healey, Adam L; Lee, David J; Furtado, Agnelo; Simmons, Blake A; Henry, Robert J

2015-01-01

In order to meet the world's growing energy demand and reduce the impact of greenhouse gas emissions resulting from fossil fuel combustion, renewable plant-based feedstocks for biofuel production must be considered. The first-generation biofuels, derived from starches of edible feedstocks, such as corn, create competition between food and fuel resources, both for the crop itself and the land on which it is grown. As such, biofuel synthesized from non-edible plant biomass (lignocellulose) generated on marginal agricultural land will help to alleviate this competition. Eucalypts, the broadly defined taxa encompassing over 900 species of Eucalyptus, Corymbia, and Angophora are the most widely planted hardwood tree in the world, harvested mainly for timber, pulp and paper, and biomaterial products. More recently, due to their exceptional growth rate and amenability to grow under a wide range of environmental conditions, eucalypts are a leading option for the development of a sustainable lignocellulosic biofuels. However, efficient conversion of woody biomass into fermentable monomeric sugars is largely dependent on pretreatment of the cell wall, whose formation and complexity lend itself toward natural recalcitrance against its efficient deconstruction. A greater understanding of this complexity within the context of various pretreatments will allow the design of new and effective deconstruction processes for bioenergy production. In this review, we present the various pretreatment options for eucalypts, including research into understanding structure and formation of the eucalypt cell wall.

Efficient Eucalypt Cell Wall Deconstruction and Conversion for Sustainable Lignocellulosic Biofuels

PubMed Central

Healey, Adam L.; Lee, David J.; Furtado, Agnelo; Simmons, Blake A.; Henry, Robert J.

2015-01-01

In order to meet the world’s growing energy demand and reduce the impact of greenhouse gas emissions resulting from fossil fuel combustion, renewable plant-based feedstocks for biofuel production must be considered. The first-generation biofuels, derived from starches of edible feedstocks, such as corn, create competition between food and fuel resources, both for the crop itself and the land on which it is grown. As such, biofuel synthesized from non-edible plant biomass (lignocellulose) generated on marginal agricultural land will help to alleviate this competition. Eucalypts, the broadly defined taxa encompassing over 900 species of Eucalyptus, Corymbia, and Angophora are the most widely planted hardwood tree in the world, harvested mainly for timber, pulp and paper, and biomaterial products. More recently, due to their exceptional growth rate and amenability to grow under a wide range of environmental conditions, eucalypts are a leading option for the development of a sustainable lignocellulosic biofuels. However, efficient conversion of woody biomass into fermentable monomeric sugars is largely dependent on pretreatment of the cell wall, whose formation and complexity lend itself toward natural recalcitrance against its efficient deconstruction. A greater understanding of this complexity within the context of various pretreatments will allow the design of new and effective deconstruction processes for bioenergy production. In this review, we present the various pretreatment options for eucalypts, including research into understanding structure and formation of the eucalypt cell wall. PMID:26636077

Audubon Mammal Study Program.

ERIC Educational Resources Information Center

National Audubon Society, New York, NY.

Included are an illustrated student reader, "The Story of Mammals," a leaders' guide, a large wall chart picturing 39 North American mammals, and a separate booklet describing the mammals on the wall chart. The student reader presents these main topics: What Is a Mammal?; How Mammals Differ From Each Other; Where, When, and How To Find Mammals;…

Study on the leakage flow through a clearance gap between two stationary walls

NASA Astrophysics Data System (ADS)

Zhao, W.; Billdal, J. T.; Nielsen, T. K.; Brekke, H.

2012-11-01

In the present paper, the leakage flow in the clearance gap between stationary walls was studied experimentally, theoretically and numerically by the computational fluid dynamics (CFD) in order to find the relationship between leakage flow, pressure difference and clearance gap. The experimental set-up of the clearance gap between two stationary walls is the simplification of the gap between the guide vane faces and facing plates in Francis turbines. This model was built in the Waterpower laboratory at Norwegian University of Science and Technology (NTNU). The empirical formula for calculating the leakage flow rate between the two stationary walls was derived from the empirical study. The experimental model is simulated by computational fluid dynamics employing the ANSYS CFX commercial software in order to study the flow structure. Both numerical simulation results and empirical formula results are in good agreement with the experimental results. The correction of the empirical formula is verified by experimental data and has been proven to be very useful in terms of quickly predicting the leakage flow rate in the guide vanes for hydraulic turbines.

Temporal Decay in Timber Species Composition and Value in Amazonian Logging Concessions.

PubMed

Richardson, Vanessa A; Peres, Carlos A

2016-01-01

Throughout human history, slow-renewal biological resource populations have been predictably overexploited, often to the point of economic extinction. We assess whether and how this has occurred with timber resources in the Brazilian Amazon. The asynchronous advance of industrial-scale logging frontiers has left regional-scale forest landscapes with varying histories of logging. Initial harvests in unlogged forests can be highly selective, targeting slow-growing, high-grade, shade-tolerant hardwood species, while later harvests tend to focus on fast-growing, light-wooded, long-lived pioneer trees. Brazil accounts for 85% of all native neotropical forest roundlog production, and the State of Pará for almost half of all timber production in Brazilian Amazonia, the largest old-growth tropical timber reserve controlled by any country. Yet the degree to which timber harvests beyond the first-cut can be financially profitable or demographically sustainable remains poorly understood. Here, we use data on legally planned logging of ~17.3 million cubic meters of timber across 314 species extracted from 824 authorized harvest areas in private and community-owned forests, 446 of which reported volumetric composition data by timber species. We document patterns of timber extraction by volume, species composition, and monetary value along aging eastern Amazonian logging frontiers, which are then explained on the basis of historical and environmental variables. Generalized linear models indicate that relatively recent logging operations farthest from heavy-traffic roads are the most selective, concentrating gross revenues on few high-value species. We find no evidence that the post-logging timber species composition and total value of forest stands recovers beyond the first-cut, suggesting that the commercially most valuable timber species become predictably rare or economically extinct in old logging frontiers. In avoiding even more destructive land-use patterns, managing yields of selectively-logged forests is crucial for the long-term integrity of forest biodiversity and financial viability of local industries. The logging history of eastern Amazonian old-growth forests likely mirrors unsustainable patterns of timber depletion over time in Brazil and other tropical countries.

Temporal Decay in Timber Species Composition and Value in Amazonian Logging Concessions

PubMed Central

Peres, Carlos A.

2016-01-01

Throughout human history, slow-renewal biological resource populations have been predictably overexploited, often to the point of economic extinction. We assess whether and how this has occurred with timber resources in the Brazilian Amazon. The asynchronous advance of industrial-scale logging frontiers has left regional-scale forest landscapes with varying histories of logging. Initial harvests in unlogged forests can be highly selective, targeting slow-growing, high-grade, shade-tolerant hardwood species, while later harvests tend to focus on fast-growing, light-wooded, long-lived pioneer trees. Brazil accounts for 85% of all native neotropical forest roundlog production, and the State of Pará for almost half of all timber production in Brazilian Amazonia, the largest old-growth tropical timber reserve controlled by any country. Yet the degree to which timber harvests beyond the first-cut can be financially profitable or demographically sustainable remains poorly understood. Here, we use data on legally planned logging of ~17.3 million cubic meters of timber across 314 species extracted from 824 authorized harvest areas in private and community-owned forests, 446 of which reported volumetric composition data by timber species. We document patterns of timber extraction by volume, species composition, and monetary value along aging eastern Amazonian logging frontiers, which are then explained on the basis of historical and environmental variables. Generalized linear models indicate that relatively recent logging operations farthest from heavy-traffic roads are the most selective, concentrating gross revenues on few high-value species. We find no evidence that the post-logging timber species composition and total value of forest stands recovers beyond the first-cut, suggesting that the commercially most valuable timber species become predictably rare or economically extinct in old logging frontiers. In avoiding even more destructive land-use patterns, managing yields of selectively-logged forests is crucial for the long-term integrity of forest biodiversity and financial viability of local industries. The logging history of eastern Amazonian old-growth forests likely mirrors unsustainable patterns of timber depletion over time in Brazil and other tropical countries. PMID:27410029

The Democratic Process: Promises and Challenges.

ERIC Educational Resources Information Center

Bragaw, Donald, Ed.

When the Berlin Wall (East Germany) came down, it symbolically foretold the end of the Soviet Union domination of Eastern Europe and Central Asia. This resource guide examines the process toward democratization occurring in those regions. The guide updates the available classroom material on the democratic process. It is divided into three…

Timber resources of East Oklahoma

Treesearch

Richard A. Birdsey; Dennis M. May

1988-01-01

Presents the principal findings of the fifth forest survey of east Oklahoma and the changes that have occurred since earlier surveys. Trends in forest area, ownership, forest type, stand structure, stocking, timber volume, growth, removals, mortality, management opportunities, and timber products output are discussed.

Economic implications of manufacturing sawed ties and timbers

Treesearch

Lawrence D. Garrett; Lawrence D. Garrett

1969-01-01

The purpose of this paper is to discuss those factors that affect the profitability of manufacturing timbers and show that the combined manufacture of both lumber and timbers will provide a greater daily income than the manufacture of lumber alone.

Characterization and Low-Cost Remediation of Soils Contaminated by Timbers in Community Gardens.

PubMed

Heiger-Bernays, W; Fraser, A; Burns, V; Diskin, K; Pierotti, D; Merchant-Borna, K; McClean, M; Brabander, D; Hynes, H P

2009-01-01

Urban community gardens worldwide provide significant health benefits to those gardening and consuming fresh produce from them. Urban gardens are most often placed in locations and on land in which soil contaminants reflect past practices and often contain elevated levels of metals and organic contaminants. Garden plot dividers made from either railroad ties or chromated copper arsenate (CCA) pressure treated lumber contribute to the soil contamination and provide a continuous source of contaminants. Elevated levels of polycyclic aromatic hydrocarbons (PAHs) derived from railroad ties and arsenic from CCA pressure treated lumber are present in the gardens studied. Using a representative garden, we 1) determined the nature and extent of urban community garden soil contaminated with PAHs and arsenic by garden timbers; 2) designed a remediation plan, based on our sampling results, with our community partner guided by public health criteria, local regulation, affordability, and replicability; 3) determined the safety and advisability of adding city compost to Boston community gardens as a soil amendment; and 4) made recommendations for community gardeners regarding healthful gardening practices. This is the first study of its kind that looks at contaminants other than lead in urban garden soil and that evaluates the effect on select soil contaminants of adding city compost to community garden soil.

Finite element analysis of electromagnetic propagation in an absorbing wave guide

NASA Technical Reports Server (NTRS)

Baumeister, Kenneth J.

1986-01-01

Wave guides play a significant role in microwave space communication systems. The attenuation per unit length of the guide depends on its construction and design frequency range. A finite element Galerkin formulation has been developed to study TM electromagnetic propagation in complex two-dimensional absorbing wave guides. The analysis models the electromagnetic absorptive characteristics of a general wave guide which could be used to determine wall losses or simulate resistive terminations fitted into the ends of a guide. It is believed that the general conclusions drawn by using this simpler two-dimensional geometry will be fundamentally the same for other geometries.

Forest area and timber resources of the San Joaquin area, California.

Treesearch

Charles L. Bolsinger

1978-01-01

This report presents statistics on forest area and timber volume and a description of the recent and future timber situations in Alpine, Amador, Calaveras, Fresno, Kern, Kings, Madera, Mariposa, Merced, Mono, San Joaquin, Stanislaus, Tulare, and Tuolumne Counties, California.

36 CFR 223.116 - Cancellation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 223.116 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Administration § 223.116 Cancellation. (a) Timber sale contracts and permits may be canceled: (1) For serious or continued violation of...

Development of minimum standards for hardwoods used in producing underground coal mine timbers

Treesearch

Floyd G. Timson

1978-01-01

This note presents minimum standards for raw material used in the production of sawn, split, and round timbers for the underground mining industry. The standards are based on a summary of information gathered from many mine-timber producers.

77 FR 64096 - Information Collection; Advertised Timber for Sale

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

... DEPARTMENT OF AGRICULTURE Forest Service Information Collection; Advertised Timber for Sale AGENCY... organizations on the revision with changes of the currently approved information collection 0596-0066 Advertised.... SUPPLEMENTARY INFORMATION: Title: Advertised Timber for Sale. OMB Number: 0596-0066. Expiration Date of Approval...

Stress grading of recycled lumber and timber

Treesearch

Robert H. Falk; David Green

1999-01-01

This paper presents an overview of selected research at the Forest Products Laboratory (FPL) to characterize the grade distribution and engineering properties of lumber and timber recycled from deconstructed buildings on US. Army installations. The effects of splits on timber beam and column...

Timber resource statistics for non-Federal forest land in southwest Oregon.

Treesearch

Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

1986-01-01

This report summarizes a 1985 timber resource inventory of the non-Federal forest land in the five counties (Coos, Curry, Douglas, Jackson, and Josephine) in southwest Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Timber resources of Douglas County, Oregon.

Treesearch

Colin D. MacLean

1976-01-01

This report summarizes a 1973 timber resource inventory of Douglas County, Oregon. Detailed tables of forest area, timber volume, growth, mortality, and cut are presented. A discussion of the present resource situation highlights the condition of cutover lands and the opportunities for silvicultural treatment.

Timber resource statistics for the Puget Sound area, Washington.

Treesearch

Patricia M. Bassett; Daniel D. Oswald

1982-01-01

This report summarizes a 1979 timber resource inventory of eight counties in the Puget Sound area of Washington: Island, King, Kitsap, Pierce, San Juan, Skagit, Snohomish, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Preliminary timber resource statistics for the Puget Sound area, Washington.

Treesearch

Colin D. MacLean; Janet L. Ohmann; Patricia M. Bassett

1991-01-01

This report summarizes a 1989 timber resource inventory of eight counties in the Puget Sound region of Washington: Island, King, Kitsap, Pierce, Skagit, San Juan, Snohomish, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Establishing The Intelligence Required By The Fire Department City Of New York For Tactical And Strategic Decision Making

DTIC Science & Technology

2016-03-01

separate but adjoining structures that have a common cockloft (attic). d. Type 4 Construction—Heavy Timber Heavy timber construction has masonry...such as in separate but adjoining structures that have a common cockloft (attic). Type 4 Construction—Heavy Timber Heavy timber construction has...information would be of some use to the FS as a whole. A secondary purpose for this thesis is that by documenting the basic structure of the FDNY CTDP

Monitoring of Soft Deposition Layers in Liquid-Filled Tubes with Guided Acoustic Waves Excited by Clamp-on Transducers.

PubMed

Tietze, Sabrina; Singer, Ferdinand; Lasota, Sandra; Ebert, Sandra; Landskron, Johannes; Schwuchow, Katrin; Drese, Klaus Stefan; Lindner, Gerhard

2018-02-09

The monitoring of liquid-filled tubes with respect to the formation of soft deposition layers such as biofilms on the inner walls calls for non-invasive and long-term stable sensors, which can be attached to existing pipe structures. For this task a method is developed, which uses an ultrasonic clamp-on device. This method is based on the impact of such deposition layers on the propagation of circumferential guided waves on the pipe wall. Such waves are partly converted into longitudinal compressional waves in the liquid, which are back-converted to guided waves in a circular cross section of the pipe. Validating this approach, laboratory experiments with gelatin deposition layers on steel tubes exhibited a distinguishable sensitivity of both wave branches with respect to the thickness of such layers. This allows the monitoring of the layer growth.

Measure Guideline: Deep Energy Enclosure Retrofit for Double-Stud Walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loomis, H.; Pettit, B.

2015-06-22

This Measure Guideline describes a deep energy enclosure retrofit solution that provides insulation to the interior of the wall assembly with the use of a double-stud wall. The guide describes two approaches to retrofitting the existing walls—one that involves replacing the existing cladding and the other that leaves the cladding in place. This guideline also covers the design principles related to the use of various insulation types and provides strategies and procedures for implementing the double-stud wall retrofit. It also includes an evaluation of important moisture-related and indoor air quality measures that need to be implemented to achieve a durablemore » high-performance wall.« less

Magnetic domain wall gratings for magnetization reversal tuning and confined dynamic mode localization.

PubMed

Trützschler, Julia; Sentosun, Kadir; Mozooni, Babak; Mattheis, Roland; McCord, Jeffrey

2016-08-04

High density magnetic domain wall gratings are imprinted in ferromagnetic-antiferromagnetic thin films by local ion irradiation by which alternating head-to-tail-to-head-to-tail and head-to-head-to-tail-to-tail spatially overlapping domain wall networks are formed. Unique magnetic domain processes result from the interaction of anchored domain walls. Non-linear magnetization response is introduced by the laterally distributed magnetic anisotropy phases. The locally varying magnetic charge distribution gives rise to localized and guided magnetization spin-wave modes directly constrained by the narrow domain wall cores. The exchange coupled multiphase material structure leads to unprecedented static and locally modified dynamic magnetic material properties.

Magnetic domain wall gratings for magnetization reversal tuning and confined dynamic mode localization

NASA Astrophysics Data System (ADS)

Trützschler, Julia; Sentosun, Kadir; Mozooni, Babak; Mattheis, Roland; McCord, Jeffrey

2016-08-01

High density magnetic domain wall gratings are imprinted in ferromagnetic-antiferromagnetic thin films by local ion irradiation by which alternating head-to-tail-to-head-to-tail and head-to-head-to-tail-to-tail spatially overlapping domain wall networks are formed. Unique magnetic domain processes result from the interaction of anchored domain walls. Non-linear magnetization response is introduced by the laterally distributed magnetic anisotropy phases. The locally varying magnetic charge distribution gives rise to localized and guided magnetization spin-wave modes directly constrained by the narrow domain wall cores. The exchange coupled multiphase material structure leads to unprecedented static and locally modified dynamic magnetic material properties.

1. West portal of Snowshed 29, contextual view to east, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. West portal of Snowshed 29, contextual view to east, 135mm lens. This is perhaps the last section of timber snowshed on this line. Integral with the east end of Tunnel 41, Snowshed 29 provides protection leading to the west portal of the tunnel. The snowshed today consists of (west to east) 199 feet of timber type T4 shed built in 1954, 365 feet of timber type T7 built in 1954, 85 feet of timber type T1 built in 1951, four feet of timber type T7 built in 1925 concurrent with Tunnel 41, and 41 feet of recent prefabricated concrete panel shed. - Central Pacific Transcontinental Railroad, Tunnel No. 41, Milepost 193.3, Donner, Placer County, CA

Image-guided intensity-modulated radiotherapy for prostate cancer: Dose constraints for the anterior rectal wall to minimize rectal toxicity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Jennifer L., E-mail: peterson.jennifer2@mayo.edu; Buskirk, Steven J.; Heckman, Michael G.

2014-04-01

Rectal adverse events (AEs) are a major concern with definitive radiotherapy (RT) treatment for prostate cancer. The anterior rectal wall is at the greatest risk of injury as it lies closest to the target volume and receives the highest dose of RT. This study evaluated the absolute volume of anterior rectal wall receiving a high dose to identify potential ideal dose constraints that can minimize rectal AEs. A total of 111 consecutive patients with Stage T1c to T3a N0 M0 prostate cancer who underwent image-guided intensity-modulated RT at our institution were included. AEs were graded according to the Common Terminologymore » Criteria for Adverse Events, version 4.0. The volume of anterior rectal wall receiving 5 to 80 Gy in 2.5-Gy increments was determined. Multivariable Cox regression models were used to identify cut points in these volumes that led to an increased risk of early and late rectal AEs. Early AEs occurred in most patients (88%); however, relatively few of them (13%) were grade ≥2. At 5 years, the cumulative incidence of late rectal AEs was 37%, with only 5% being grade ≥2. For almost all RT doses, we identified a threshold of irradiated absolute volume of anterior rectal wall above which there was at least a trend toward a significantly higher rate of AEs. Most strikingly, patients with more than 1.29, 0.73, or 0.45 cm{sup 3} of anterior rectal wall exposed to radiation doses of 67.5, 70, or 72.5 Gy, respectively, had a significantly increased risk of late AEs (relative risks [RR]: 2.18 to 2.72; p ≤ 0.041) and of grade ≥ 2 early AEs (RR: 6.36 to 6.48; p = 0.004). Our study provides evidence that definitive image-guided intensity-modulated radiotherapy (IG-IMRT) for prostate cancer is well tolerated and also identifies dose thresholds for the absolute volume of anterior rectal wall above which patients are at greater risk of early and late complications.« less

36 CFR 223.101 - Determination of purchaser responsibility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Award of Contracts § 223.101 Determination of purchaser responsibility. (a) A Contracting Officer shall not award a timber sale... and governmental business commitments; (3) The purchaser has a satisfactory performance record on...

Timber resources of western Oregon—highlights and statistics.

Treesearch

Donald R. Gedney

1982-01-01

This report summarizes and interprets the results of a timber resource inventory of western Oregon made between 1973 and 1976. Detailed tables give land and forest area, timber volume, growth, and mortality for western Oregon and for southwest Oregon, west-central Oregon, and northwest Oregon.

Operability and location of Wisconsin's timber resource.

Treesearch

Jerold T. Hahn; Mark H. Hansen

1989-01-01

Data collected during the 1983 Wisconsin Statewide forest inventory were used to examine operability of the timber resource based on seven operability components. Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site.

Operability and location of Michigan's timber resource.

Treesearch

Mark H. Hansen; Jerold T. Hahn

1987-01-01

Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site. Data collected during the 1980 Michigan statewide forest inventory were used to examine operability of the timber resource based on seven operability components.

Timber resource statistics for non-Federal forest land in west-central Oregon.

Treesearch

Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

1987-01-01

This report summarizes a 1985-86 timber resource inventory of the non-Federal forest land in the four counties (Benton, Lane, Lincoln, and Linn) in west-central Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

1973 Oregon timber harvest.

Treesearch

J.D. Jr. Lloyd

1974-01-01

The 1973 Oregon timber harvest of 9.36 billion board feet was 265 million board feet (2.8 percent) below the 1972 harvest. The greater portion of the decrease occurred in eastern Oregon where timber harvest dropped 9.4 percent compared with 0.9 percent in western Oregon.

The North Central Forest Inventory and Analysis timber product output database--a regional composite approach.

Treesearch

Dennis M. May

1998-01-01

Discusses a regional composite approach to managing timber product output data in a relational database. Describes the development and structure of the regional composite database and demonstrates its use in addressing everyday timber product output information needs.

Simple models for estimating local removals of timber in the northeast

Treesearch

David N. Larsen; David A. Gansner

1975-01-01

Provides a practical method of estimating subregional removals of timber and demonstrates its application to a typical problem. Stepwise multiple regression analysis is used to develop equations for estimating removals of softwood, hardwood, and all timber from selected characteristics of socioeconomic structure.

Load capacity of hollowed timber piles.

DOT National Transportation Integrated Search

1998-12-01

The goal of this study was to develop a reliable load-rating methodology for timber piles based on the level of documented damage. Louisiana currently has over 4,000 timber bridges in its inventory of over 13,800 bridges. A quarter of these 4,000 tim...

Michigan's fourth forest inventory: timber volumes and projections of timber supply.

Treesearch

John S. Jr. Spencer; Jerold T. Hahn

1984-01-01

The fourth inventory of the timber resource of Michigan shows growing-stock volume increased 27% between 1966 and 1980, from 15.1 to 19.1 billion cubic feet. Presented are highlights and statistics on volume, growth, mortality, removals, biomass, and projections.

Eleventh-century shift in timber procurement areas for the great houses of Chaco Canyon

PubMed Central

Guiterman, Christopher H.; Dean, Jeffrey S.

2016-01-01

An enduring mystery from the great houses of Chaco Canyon is the origin of more than 240,000 construction timbers. We evaluate probable timber procurement areas for seven great houses by applying tree-ring width-based sourcing to a set of 170 timbers. To our knowledge, this is the first use of tree rings to assess timber origins in the southwestern United States. We found that the Chuska and Zuni Mountains (>75 km distant) were the most likely sources, accounting for 70% of timbers. Most notably, procurement areas changed through time. Before 1020 Common Era (CE) nearly all timbers originated from the Zunis (a previously unrecognized source), but by 1060 CE the Chuskas eclipsed the Zuni area in total wood imports. This shift occurred at the onset of Chaco florescence in the 11th century, a time with substantial expansion of existing great houses and the addition of seven new great houses in the Chaco Core area. It also coincides with the proliferation of Chuskan stone tools and pottery in the archaeological record of Chaco Canyon, further underscoring the link between land use and occupation in the Chuska area and the peak of great house construction. Our findings, based on the most temporally specific and replicated evidence of Chacoan resource procurement obtained to date, corroborate the long-standing but recently challenged interpretation that large numbers of timbers were harvested and transported from distant mountain ranges to build the great houses at Chaco Canyon. PMID:26644552

Eleventh-century shift in timber procurement areas for the great houses of Chaco Canyon.

PubMed

Guiterman, Christopher H; Swetnam, Thomas W; Dean, Jeffrey S

2016-02-02

An enduring mystery from the great houses of Chaco Canyon is the origin of more than 240,000 construction timbers. We evaluate probable timber procurement areas for seven great houses by applying tree-ring width-based sourcing to a set of 170 timbers. To our knowledge, this is the first use of tree rings to assess timber origins in the southwestern United States. We found that the Chuska and Zuni Mountains (>75 km distant) were the most likely sources, accounting for 70% of timbers. Most notably, procurement areas changed through time. Before 1020 Common Era (CE) nearly all timbers originated from the Zunis (a previously unrecognized source), but by 1060 CE the Chuskas eclipsed the Zuni area in total wood imports. This shift occurred at the onset of Chaco florescence in the 11th century, a time with substantial expansion of existing great houses and the addition of seven new great houses in the Chaco Core area. It also coincides with the proliferation of Chuskan stone tools and pottery in the archaeological record of Chaco Canyon, further underscoring the link between land use and occupation in the Chuska area and the peak of great house construction. Our findings, based on the most temporally specific and replicated evidence of Chacoan resource procurement obtained to date, corroborate the long-standing but recently challenged interpretation that large numbers of timbers were harvested and transported from distant mountain ranges to build the great houses at Chaco Canyon.

Measure Guideline. Wall Air Sealing and Insulation Methods in Existing Homes; An Overview of Opportunity and Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, S.; Stephenson, R.

2012-09-01

This guide provides renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project. It also outlines the potential project risks, various materials for insulating, possible field inspections needed, installation procedures, as well as the benefits and drawbacks.

36 CFR 223.101 - Determination of purchaser responsibility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... purchaser has a satisfactory performance record on timber sale contracts. A prospective purchaser that is or... AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS Timber Sale Contracts Award of Contracts § 223.101 Determination of purchaser responsibility. (a...

48 CFR 1452.237-71 - Utilization of Woody Biomass.

Code of Federal Regulations, 2011 CFR

2011-10-01

... timber/vegetative sales contract. Payment under the timber/vegetative sales contract must be at a price... appropriate payment specified in the related timber/vegetative sales contract before removal may be authorized... sales notice and/or prospectus, including volume estimates, appraised value and any appropriate special...

75 FR 63419 - Surety Bond Guarantee Program; Timber Sales

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... timber sale contracts may require the purchaser to furnish a performance bond for satisfactory compliance.... With respect to a Performance Bond involving the sale of timber on land managed by USDA, the Federal... Sales AGENCY: Small Business Administration. ACTION: Proposed rule. SUMMARY: The Small Business...

Historical considerations in evaluating timber structures

Treesearch

R. L. Tuomi; R. C. Moody

1979-01-01

Evaluation, maintenance, and upgrading of timber structures is an area where little printed reference material exists. This paper covers the state-of-the-art on design, material properties, and construction procedures on older buildings. Some guidelines are presented on rehabilitating and upgrading timber structures, along with significant references.

Timber resource of Missouri's Prairie, 1972.

Treesearch

Jerold T. Hahn; Alexander Vasilevsky

1975-01-01

The third timber inventory of Missouri's Prairie Forest Survey Unit shows substantial declines in both growing-stock and sawtimber volumes between 1959 and 1972. Commercial forest area declined by one-fifth. Presents highlights and statistics on forest area and timber volume, growth, mortality, ownership, and use in 1972.

36 CFR 223.85 - Noncompetitive sale of timber.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Noncompetitive sale of timber. 223.85 Section 223.85 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.32 - Timber sale operating plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Timber sale operating plan. 223.32 Section 223.32 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.32 - Timber sale operating plan.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Timber sale operating plan. 223.32 Section 223.32 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.32 - Timber sale operating plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Timber sale operating plan. 223.32 Section 223.32 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.32 - Timber sale operating plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Timber sale operating plan. 223.32 Section 223.32 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.85 - Noncompetitive sale of timber.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Noncompetitive sale of timber. 223.85 Section 223.85 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.85 - Noncompetitive sale of timber.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Noncompetitive sale of timber. 223.85 Section 223.85 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

Iowa's forest resources, 1974.

Treesearch

John S. Jr. Spencer; Pamela J. Jakes

1980-01-01

The second inventory of Iowa's forest resources shows big declines in commercial forest area and in growing-stock and sawtimber volumes between 1954 and 1974. Presented are text and statistics on forest area and timber volume, growth, mortality, ownership, stocking, future timber supply, timber use, forest management opportunities, and nontimber resources.

36 CFR 223.188 - Prohibitions against exporting unprocessed Federal timber.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Prohibitions against exporting unprocessed Federal timber. 223.188 Section 223.188 Parks, Forests, and Public Property FOREST... Program § 223.188 Prohibitions against exporting unprocessed Federal timber. No person who acquires...

36 CFR 223.188 - Prohibitions against exporting unprocessed Federal timber.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Prohibitions against exporting unprocessed Federal timber. 223.188 Section 223.188 Parks, Forests, and Public Property FOREST... Program § 223.188 Prohibitions against exporting unprocessed Federal timber. No person who acquires...

36 CFR 223.188 - Prohibitions against exporting unprocessed Federal timber.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Prohibitions against exporting unprocessed Federal timber. 223.188 Section 223.188 Parks, Forests, and Public Property FOREST... Program § 223.188 Prohibitions against exporting unprocessed Federal timber. No person who acquires...

36 CFR 223.188 - Prohibitions against exporting unprocessed Federal timber.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Prohibitions against exporting unprocessed Federal timber. 223.188 Section 223.188 Parks, Forests, and Public Property FOREST... Program § 223.188 Prohibitions against exporting unprocessed Federal timber. No person who acquires...

Minnesota timber industry--an assessment of timber product output and use, 1990.

Treesearch

Ronald L. Hackett; Richard A. Dahlman

1993-01-01

Discusses recent Minnesota forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1990. Reports on logging residue, wood and bark residue generated at primary wood-using mills, and disposition of mill residues.

36 CFR 223.187 - Determinations of unprocessed timber.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...) and its implementing regulations. I fully understand that exporting unprocessed timber originating... domestically is a violation of this Act, its implementing regulations, and the False Statements Act (18 U.S.C...

Two-rail steel-backed timber guardrail system : Crown Point Highway, Multnomah County, Oregon : final report.

DOT National Transportation Integrated Search

1995-02-01

In 1920, to provide for the safety of drivers on the Columbia River Highway, two-rail timber guardrail were installed. Subsequently, the two-rail timber guardrail were replaced by more modern guardrail. Recently, the Historic Columbia River Highway A...

DEVELOPING A PRODUCTION POSSIBILITY SET OF WILDLIFE SPECIES PERSISTENCE AND TIMBER HARVEST VALUE

EPA Science Inventory

An integrated model combing a wildlife population simulation model, and timber harvest and growth models was developed to explore the tradeoffs between the likelihood of persistence of a hypothetical wildlife species and timber harvest volumes on a landscape in the Central Oregon...

36 CFR 223.190 - Sourcing area application procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... manufacturing facility that processes Federal timber and who is an exporter may apply for a sourcing area... within the proposed sourcing area where the person intends to process timber originating from Federal... knowledge concerning my timber purchasing and export patterns. I certify that the information provided...

Echolocation Reconsidered: Using Spatial Variations in the Ambient Sound Field To Guide Locomotion.

ERIC Educational Resources Information Center

Ashmead, Daniel H.; Wall, Robert S.; Eaton, Susan B.; Ebinger, Kiara A.; Snook-Hill, Mary-Maureen; And Others

1998-01-01

Presents an acoustical model and evidence from four experiments that children with visual impairments use the buildup of low-frequency sound along walls to guide locomotion. The model differs from the concept of echolocation by emphasizing sound that is ambient, rather than self-produced, and of low frequency. (Author/CR)

Finishing: Construction Industry Series: Preparation Level: Student Manual and Instructor's Guide.

ERIC Educational Resources Information Center

Texas Education Agency, Austin. Dept. of Occupational Education and Technology.

The guide is an outline of training experiences designed to lead a student to at least entry-level job proficiency in the finishing trades within the construction industry. Teaching units cover insulating, drywall, painting and wall covering, glass and glazing, floor covering, and landscaping. Each unit has several overall objectives which are…

LOADED WAVE GUIDES FOR LINEAR ACCELERATORS

DOEpatents

Walkinshaw, W.; Mullett, L.B.

1959-12-01

A periodically loaded waveguide having substantially coaxially arranged elements which provide an axial field for the acceleration of electrons is described. Radiofrequency energy will flow in the space between the inner wall of an outer guide and the peripheries of equally spaced irises or washes arranged coaxially with each other and with the outer guide, where the loading due to the geometry of the irises is such as to reduce the phase velocity of the r-f energy flowing in the guide from a value greater than that of light to the velocity of light or less.

Curvature-Guided Motility of Microalgae in Geometric Confinement

NASA Astrophysics Data System (ADS)

Ostapenko, Tanya; Schwarzendahl, Fabian Jan; Böddeker, Thomas J.; Kreis, Christian Titus; Cammann, Jan; Mazza, Marco G.; Bäumchen, Oliver

2018-02-01

Microorganisms, such as bacteria and microalgae, often live in habitats consisting of a liquid phase and a plethora of interfaces. The precise ways in which these motile microbes behave in their confined environment remain unclear. Using experiments and Brownian dynamics simulations, we study the motility of a single Chlamydomonas microalga in an isolated microhabitat with controlled geometric properties. We demonstrate how the geometry of the habitat controls the cell's navigation in confinement. The probability of finding the cell swimming near the boundary increases with the wall curvature, as seen for both circular and elliptical chambers. The theory, utilizing an asymmetric dumbbell model of the cell and steric wall interactions, captures this curvature-guided navigation quantitatively with no free parameters.

36 CFR 261.6 - Timber and other forest products.

Code of Federal Regulations, 2010 CFR

2010-07-01

... or otherwise damaging any timber, tree, or other forest product, except as authorized by a special-use authorization, timber sale contract, or Federal law or regulation. (b) Cutting any standing tree... otherwise identifying any tree or other forest product in a manner similar to that employed by forest...

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2010 CFR

2010-07-01

... deposits for slash disposal and road maintenance. As used in this section estimated construction costs... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber purchaser road... § 223.62 Timber purchaser road construction credit. Appraisal may also establish stumpage value as if...

Review on antibacterial characteristics of bridge engineering biomaterials.

PubMed

Zhao, Qing-Qing; Chen, Meng-Yao; He, Rui-Lin; Zhang, Zhong-Feng; Ashraf, Muhammad Aqeel

2016-01-01

This review summarizes the research on timber construction materials used in bridge construction. It focuses on the application of antiseptic treatments and the use of timber engineering materials in decks and bridges. This review also provides an overview on the future research and prospects of engineered timber materials.

36 CFR 223.112 - Modification of contracts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Administration § 223.112 Modification of contracts. (a) Timber sale contracts may be modified only when the modification.... Modifications may be made by the officer approving the sale, by his successor, or by his superior, except as...

25 CFR 163.23 - Advance payment for timber products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... otherwise authorized by the Secretary, and except in the case of lump sum (predetermined volume) sales, contracts for the sale of timber from allotted, trust or restricted Indian forest land shall provide for an... advance deposits and advance payments previously applied against timber cut from each ownership in a sale...

Timber rivets in structural composite lumber

Treesearch

Ronald W. Wolfe; Marshall Begel; Bruce Craig

2004-01-01

Timber rivet connections, originally developed for use with glulam construction, may be a viable option for use with structural composite lumber (SCL) products. Tests were conducted on small samples to assess the performance and predictability of timber rivet connections in parallel strand lumber (PSL) and laminated strand lumber (LSL). The test joint configurations...

Timber resource statistics for western Washington.

Treesearch

Coffin D. MacLean; Patricia M. Bassett; Glenn Yeary

1992-01-01

This report summarizes a 1988-90 timber resource inventory of 19 counties in western Washington: Clallam, Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Mason, Pacific, Pierce, San Juan, Skagit, Skamania, Snohomish, Thurston, Wahkiakum, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

20 CFR 404.1084 - Gain or loss from disposition of property; capital assets; timber, coal, and iron ore...

Code of Federal Regulations, 2010 CFR

2010-04-01

...; capital assets; timber, coal, and iron ore; involuntary conversion. 404.1084 Section 404.1084 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950... from disposition of property; capital assets; timber, coal, and iron ore; involuntary conversion. (a...

36 CFR 219.28 - Determination of land suitable for timber harvest.

Code of Federal Regulations, 2010 CFR

2010-07-01

... conditions and ecological sustainability, and is necessary to protect multiple-use values other than timber... justified by the ecological, social, or economic benefits considering physical, economic, and other... revision of the plan. (c) Lands where timber may be harvested for other multiple-use values. Except for...

The timber industries of Maryland

Treesearch

James T. Bones; John E. Brodie

1977-01-01

A periodic evaluation of statewide industrial timber output based upon a complete survey of the primary wood manufacturing plants in Maryland. Contains statistics about industrial timber production and receipts in 1975 and the production and disposition of the manufacturing residues that resulted. The 43 million cubic feet of industrial wood produced in 1975...

Nondestructive evaluation of incipient decay in hardwood logs

Treesearch

Xiping Wang; Jan Wiedenbeck; Robert J. Ross; John W. Forsman; John R. Erickson; Crystal Pilon; Brian K. Brashaw

2005-01-01

Decay can cause significant damage to high-value hardwood timber. New nondestructive evaluation (NDE) technologies are urgently needed to effectively detect incipient decay in hardwood timber at the earliest possible stage. Currently, the primary means of inspecting timber relies on visual assessment criteria. When visual inspections are used exclusively, they provide...

Timber and Amenities on Nonindustrial Private Forest Land

Treesearch

Subhrendu K. Pattanayak; Karen Lee Abt; Thomas P. Holmes

2003-01-01

Economic analyses of the joint production timber and amenities from nonindustrial private forest lands (NIPF) have been conducted for several decades. Binkley (1981) summarized this strand of research and elegantly articulated a microeconomic household model in which NIPF owners maximize utility by choosing optimal combinations of timber income and amenities. Most...

Historical reflections on the Arkansas cross timbers

Treesearch

Don C. Bragg

2004-01-01

Kuclller's original rnap of potential natural vegetation suggested that the eastern-most extension of the "Cross Timbers" oak-dominated woodland reached into extreme western Arkansas. Iiecellt investigations have found possible old-growth Cross Timber communities in narrow strips along steep, rocky sandstone and shale ridges near Fort Chaffee and Hackett...

An analysis of Pennsylvania's forest resources

Treesearch

Douglas S. Powell; Thomas J., Jr. Considine; Thomas J. Considine

1982-01-01

A comprehensive analysis of the current status and trends of the forest resources of Pennsylvania. Topics include forest area, timber volume, biomass, timber products, timber's role in the state's economy, growth, and removals. Forest area, volume, growth and removals are projected through 2008. A detailed treatment is glven to water, soil, minerals, fish,...

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Timber purchaser road construction credit. 223.62 Section 223.62 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Timber purchaser road construction credit. 223.62 Section 223.62 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Timber purchaser road construction credit. 223.62 Section 223.62 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

36 CFR 223.62 - Timber purchaser road construction credit.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Timber purchaser road construction credit. 223.62 Section 223.62 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

43 CFR 9269.3-5 - Timber management.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Timber management. 9269.3-5 Section 9269.3-5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Timber management. (a) Sales of forest products; general. [Reserved] (b) Non-sale disposals; general—(1...

43 CFR 9269.3-5 - Timber management.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Timber management. 9269.3-5 Section 9269.3-5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Timber management. (a) Sales of forest products; general. [Reserved] (b) Non-sale disposals; general—(1...

43 CFR 9269.3-5 - Timber management.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Timber management. 9269.3-5 Section 9269.3-5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Timber management. (a) Sales of forest products; general. [Reserved] (b) Non-sale disposals; general—(1...

43 CFR 9269.3-5 - Timber management.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Timber management. 9269.3-5 Section 9269.3-5 Public Lands: Interior Regulations Relating to Public Lands (Continued) BUREAU OF LAND MANAGEMENT... Timber management. (a) Sales of forest products; general. [Reserved] (b) Non-sale disposals; general—(1...

Wisconsin timber industry--an assessment of timber product output and use, 1999

Treesearch

William H. IV Reading; James W. Whipple

2003-01-01

Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood; and production of saw logs, veneer logs, and other timber products in 1999. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mill residues.

A method for estimating operability and location of the timber resource.

Treesearch

John S. Jr. Spencer; Mark H. Hansen; Pamela J. Jakes

1986-01-01

Operability is the relative ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site. Using data collected during standard statewide forest inventories, we developed a method for classifying timber by operability class based on seven operability components.

Wisconsin timber industry--an assessment of timber output trends.

Treesearch

James E. Blyth; James W. Whipple; Terry Mace; W. Brad Smith

1985-01-01

Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of fuelwood and other timber products in 1981. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

Michigan timber industry--an assessment of timber product output and use, 1988.

Treesearch

W. Brad Smith; Anthony K. Weatherspoon; John Pilon

1990-01-01

Discusses recent Michigan forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1988. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

Timber resource statistics for non-federal forest land in northwest Oregon.

Treesearch

Donald R. Gedney; Patricia M. Bassett; Mary A. Mei

1986-01-01

This report summarizes a 1986 timber resource inventory of the non-Federal forest land in the 10 counties (Clackamas, Clatsop, Columbia, Hood River, Marion, Multnomah , Polk, Tillamook, Washington, and Yamhill) in northwest Oregon. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

Indiana's timber industry--an assessment of timber product output and use, 1995.

Treesearch

Ronald L. Hackett; Jeff Settle

1998-01-01

Discusses recent Indiana forest industry trends; production and receipts of saw logs, pulpwood, and veneer logs; and production of other timber products in 1995. Reports on harvest residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

Timber salvage economics

Treesearch

Jeffrey P. Prestemon; Thomas P. Holmes

2008-01-01

Timber salvage is commonly done following natural disturbances, to recover some value from damaged forests. Decision making about salvage, however, is affected by ownership objectives, the nature of the damage agent, site factors, and the strength of the local timber market. For profit-maximizing landowners, salvage decisions must balance the cost of harvesting...

75 FR 17896 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-08

... techniques or other forms of information technology should be addressed to: Desk Officer for Agriculture....C. 472a (14)(c) (Act) requires timber sale operating plans on timber sales that exceed 2 years in... within 60 days of award of timber sale contracts and annually thereafter until harvest is complete...

Deterioration rates of blowndown timber and potential problems associated with product recovery.

Treesearch

Paul E. Aho; James M. Cahill

1984-01-01

This paper summarizes published reports of deterioration and product recovery studies conducted on dead timber. Decay rates experienced in blowndown timber are presented for western redcedar (Thuja plicata Donn ex D. Don), Douglasfir (Pseudotsuga menziesii (Mirb.) Franco), western hemlock (Tsuga heterophylla (Raf.) Sarg.), and...

36 CFR 223.63 - Advertised rates.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Advertised rates. 223.63... DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Appraisal and Pricing § 223.63 Advertised rates. Timber shall be advertised for sale at its appraised value. The road construction cost used to...

36 CFR 223.85 - Noncompetitive sale of timber.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...). Notwithstanding the provisions of paragraph (a) of this section or any other regulation in this part, for timber... any other regulation in this part, when such extraordinary conditions exist on sales not addressed in...

36 CFR 223.14 - Where timber may be cut.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Where timber may be cut. 223.14 Section 223.14 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS...

36 CFR 223.1 - Authority to sell timber.

Code of Federal Regulations, 2011 CFR

2011-07-01

... General Provisions § 223.1 Authority to sell timber. Trees, portions of trees, and other forest products... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Authority to sell timber. 223.1 Section 223.1 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE...

36 CFR 223.1 - Authority to sell timber.

Code of Federal Regulations, 2013 CFR

2013-07-01

... General Provisions § 223.1 Authority to sell timber. Trees, portions of trees, and other forest products... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Authority to sell timber. 223.1 Section 223.1 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE...

36 CFR 223.1 - Authority to sell timber.

Code of Federal Regulations, 2012 CFR

2012-07-01

... General Provisions § 223.1 Authority to sell timber. Trees, portions of trees, and other forest products... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Authority to sell timber. 223.1 Section 223.1 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE...

36 CFR 223.14 - Where timber may be cut.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Where timber may be cut. 223.14 Section 223.14 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS...

36 CFR 223.1 - Authority to sell timber.

Code of Federal Regulations, 2014 CFR

2014-07-01

... General Provisions § 223.1 Authority to sell timber. Trees, portions of trees, and other forest products... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Authority to sell timber. 223.1 Section 223.1 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE...

36 CFR 223.14 - Where timber may be cut.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Where timber may be cut. 223.14 Section 223.14 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS...

36 CFR 223.14 - Where timber may be cut.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Where timber may be cut. 223.14 Section 223.14 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS...

Evaluation of the performance of a press-lam timber bridge : interim report no. 1, bridge installation and load test.

DOT National Transportation Integrated Search

1977-01-01

The report describes the installation and load test of the world's first press-lam timber bridge superstructure. A five-man crew replaced the substandard steel stringer-timber deck superstructure on Rte. 610 over Little Stoney Creek in Shenandoah Cou...

Washington's public and private forests.

Treesearch

Charles L. Bolsinger; Neil McKay; Donald FL Gedney; Carol Alerich

1997-01-01

This report summarizes and analyzes 1988-91 timber inventories of western and eastern Washington. These inventories were conducted on all private and public lands except National Forests. Timber resource statistics from National Forest inventories also are presented. Detailed tables provide estimates of forest area, timber volume, growth, mortality, and harvest. Data...

Wisconsin timber industry--an assessment of timber product output and use, 1988.

Treesearch

W. Brad Smith; James W. Whipple

1990-01-01

Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1988. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

32 CFR 644.504 - Disposal plan for timber.

Code of Federal Regulations, 2011 CFR

2011-07-01

... merchantable dead timber will be marked for cutting in accordance with the land management plan, Master Plan, or forestry supplement thereto, and cutting will be limited to the timber so marked. The disposal... affecting the installations, and the requirements of such measures will be set forth specifically. (e) Any...

1970 Oregon timber harvest.

Treesearch

Brian R. Wall

1971-01-01

The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

Responses of timber rattlesnakes to fire: Lessons from two prescribed burns

Treesearch

Steven J. Beaupre; Lara E. Douglas

2012-01-01

Timber rattlesnakes (Crotalus horridus) are excellent model organisms for understanding the effects of large scale habitat manipulations because of their low-energy lifestyle, rapid response to changes in resource environment, uniform diet (small mammals), and simple behaviors. We present two case studies that illustrate interactions between timber...

36 CFR 261.6 - Timber and other forest products.

Code of Federal Regulations, 2014 CFR

2014-07-01

... or otherwise damaging any timber, tree, or other forest product, except as authorized by a special-use authorization, timber sale contract, or Federal law or regulation. (b) Cutting any standing tree... otherwise identifying any tree or other forest product in a manner similar to that employed by forest...

36 CFR 261.6 - Timber and other forest products.

Code of Federal Regulations, 2011 CFR

2011-07-01

... or otherwise damaging any timber, tree, or other forest product, except as authorized by a special-use authorization, timber sale contract, or Federal law or regulation. (b) Cutting any standing tree... otherwise identifying any tree or other forest product in a manner similar to that employed by forest...

36 CFR 261.6 - Timber and other forest products.

Code of Federal Regulations, 2013 CFR

2013-07-01

... or otherwise damaging any timber, tree, or other forest product, except as authorized by a special-use authorization, timber sale contract, or Federal law or regulation. (b) Cutting any standing tree... otherwise identifying any tree or other forest product in a manner similar to that employed by forest...

36 CFR 261.6 - Timber and other forest products.

Code of Federal Regulations, 2012 CFR

2012-07-01

... or otherwise damaging any timber, tree, or other forest product, except as authorized by a special-use authorization, timber sale contract, or Federal law or regulation. (b) Cutting any standing tree... otherwise identifying any tree or other forest product in a manner similar to that employed by forest...

Restocking conditions on the burned-over forest lands of southwestern Maine, June 1949

Treesearch

Wayne G. Banks; James C. Rettie

1949-01-01

Disastrous fires swept over some 130,000 acres of forest land in southwestern Maine during the autumn of 1947. Practically all of the timber stand (211 million board feet of saw timber and 400,000 cords of pole timber) was killed or injured by this fire.

36 CFR 223.201 - Limitations on unprocessed timber harvested in Alaska.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Limitations on unprocessed timber harvested in Alaska. 223.201 Section 223.201 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND...

Wisconsin timber industry--an assessment of timber product output and use, 1990.

Treesearch

Ronald L. Hackett; James W. Whipple

1993-01-01

Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1990. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

Wisconsin timber industry--an assessment of timber product output and use, 1996.

Treesearch

Ronald L. Hackett; Ronald J. Piva; James W. Whipple

2002-01-01

Discusses recent Wisconsin forest industry trends: production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1996. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of mill residues.

Wisconsin timber industry--an assessment of timber product output and use.

Treesearch

Ronald L. Hackett; James W. Whipple

1995-01-01

Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1992. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

75 FR 81210 - Wrangell Ranger District; Alaska; Wrangell Island Project Environmental Impact Statement

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... opportunity involving a variety of timber harvest, road construction, and forest restoration and enhancement... authorize forest restoration and enhancement activities, timber harvest, and associated road construction on... Forest Service is proposing a multi-year stewardship project involving a variety of timber harvest, road...

Fiber farming with insecticidal

Treesearch

Leah S. Bauer

1997-01-01

Naturally regenerated forests are the primary source of timber, fiber, and fuel throughout much of the world today. In the United States, however, public outcry over increasing forest fragmentation and habitat loss is reducing timber harvests in many areas. As our demand for forest products exceeds supplies, reliance on international timber resources will escalate,...

Timber resource of Missouri's Riverborder, 1972.

Treesearch

John S. Jr. Spencer; Arnold J. Ostrom

1975-01-01

The third timber inventory of Missouri's Riverborder Forest Survey Unit shows that neither the total volume of growing stock nor of sawtimber changed significantly between 1959 and 1972. Area of commercial forest land declined slightly. Presents statistics on forest area and timber volume, growth, mortality, ownership and use in 1972.

Timber management and use-value assessment

Treesearch

Paul E. Sendak; Neil K. Huyler

1994-01-01

Describes timber management activity and estimates timber harvest from forest land enrolled in Vermont's Use Value Appraisal (UVA) Forest Land property tax program. Data were compiled from the mandatory management plans and annual conformance reports filed for each property enrolled in the Program. Overall, 31 percent of the UVA properties reported a commercial...

Phase I archaeological survey of the proposed timber harvest areas in traininq areas 8, 13, and 14 on the Fort Knox Military Reservation, Hardin and Meade Counties, Kentucky. Final report, June-July 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schenian, P.A.

1995-07-01

In June and July 1995, the Fort Knox Contract Staff Archaeologist conducted a Phase I archaeological survey of proposed timber harvest areas in Training Areas 8, 13, and 14 on the Fort Knox Military Reservation, Hardin and Meade Counties, Kentucky. The timber areas consist of five small, disjoint project areas encompassing a total of 11 acres (4.4 ha). The trees to be harvested had been marked by the forestry section prior to the survey. All timber areas were walked in their entirety. No evidence of archaeological sites was found in this study. It is recommended that the timber harvesting bemore » conducted as proposed.« less

Reinforcement of timber beams with carbon fibers reinforced plastics

NASA Astrophysics Data System (ADS)

Gugutsidze, G.; Draškovič, F.

2010-06-01

Wood is a polymeric material with many valuable features and which also lacks some negative features. In order to keep up with high construction rates and the minimization of negative effects, wood has become one of the most valuable materials in modern engineering. But the use of timber material economically is also an actual problem in order to protect the environment and improve natural surroundings. A panel of scientists is interested in solving these problems and in creating rational structures, where timber can be used efficiently. These constructions are as follows: glue-laminated (gluelam), composed and reinforced wooden constructions. Composed and reinforced wooden constructions are examined less, but according to researches already carried out, it is clear that significant work can be accomplished in creating rational, highly effective and economic timber constructions. The paper deals with research on the formation of composed fiber-reinforced beams (CFRP) made of timber and provide evidence of their effectiveness. The aim of the paper is to investigate cross-bending of CFRP-reinforced gluelaminated timber beams. According to the results we were able to determine the additional effectiveness of reinforcement with CFRP (which depends on the CFRP material's quality, quantity and module of elasticity) on the mechanical features of timber and a whole beam.

Termites utilise clay to build structural supports and so increase foraging resources

PubMed Central

Oberst, Sebastian; Lai, Joseph C. S.; Evans, Theodore A.

2016-01-01

Many termite species use clay to build foraging galleries and mound-nests. In some cases clay is placed within excavations of their wooden food, such as living trees or timber in buildings; however the purpose for this clay is unclear. We tested the hypotheses that termites can identify load bearing wood, and that they use clay to provide mechanical support of the load and thus allow them to eat the wood. In field and laboratory experiments, we show that the lower termite Coptotermes acinaciformis, the most basal species to build a mound-nest, can distinguish unloaded from loaded wood, and use clay differently when eating each type. The termites target unloaded wood preferentially, and use thin clay sheeting to camouflage themselves while eating the unloaded wood. The termites attack loaded wood secondarily, and build thick, load-bearing clay walls when they do. The termites add clay and build thicker walls as the load-bearing wood is consumed. The use of clay to support wood under load unlocks otherwise unavailable food resources. This behaviour may represent an evolutionary step from foraging behaviour to nest building in lower termites. PMID:26854187

26 CFR 1.611-3 - Rules applicable to timber.

Code of Federal Regulations, 2011 CFR

2011-04-01

... taxpayer making the return, as the result of the growth of the timber, of changes in standards of... for depletion) shall be revised. The depletion unit shall be changed when such revision has been made... until a change in facts requires another revision. (f) Determination of fair market value of timber...

26 CFR 1.611-3 - Rules applicable to timber.

Code of Federal Regulations, 2013 CFR

2013-04-01

... taxpayer making the return, as the result of the growth of the timber, of changes in standards of... for depletion) shall be revised. The depletion unit shall be changed when such revision has been made... until a change in facts requires another revision. (f) Determination of fair market value of timber...

26 CFR 1.611-3 - Rules applicable to timber.

Code of Federal Regulations, 2012 CFR

2012-04-01

... taxpayer making the return, as the result of the growth of the timber, of changes in standards of... for depletion) shall be revised. The depletion unit shall be changed when such revision has been made... until a change in facts requires another revision. (f) Determination of fair market value of timber...

26 CFR 1.611-3 - Rules applicable to timber.

Code of Federal Regulations, 2014 CFR

2014-04-01

... taxpayer making the return, as the result of the growth of the timber, of changes in standards of... for depletion) shall be revised. The depletion unit shall be changed when such revision has been made... until a change in facts requires another revision. (f) Determination of fair market value of timber...

32 CFR 644.551 - Equal opportunity-sales of timber, embedded sand, gravel, stone, and surplus structures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Equal opportunity-sales of timber, embedded sand... (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL PROPERTY REAL ESTATE HANDBOOK Disposal Sale Procedure § 644.551 Equal opportunity—sales of timber, embedded sand, gravel, stone, and surplus structures...

36 CFR 223.47 - Date of completion of permanent road construction.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS Timber Sale Contracts Contract Conditions and Provisions § 223.47 Date of... obligations as set forth in the Notice of Sale shall be incorporated into the timber sale contract. (b) This...

The timber industries of Pennsylvania, 1988

Treesearch

Eric H. Wharton; John L. Bearer; John L. Bearer

1993-01-01

Evaluates regional timber output of Pennsylvania. Results are based on a survey of primary processing mills located in the state, and of mills in other states that used wood from Pennsylvania. Contains statistics on industrial timber production and mill receipts and the production and final end use of manufacturing residues. Comparisons are made between historical and...

Alaska's timber harvest and forest products industry, 2005

Treesearch

Jeff M. Halbrook; Todd A. Morgan; Jason P. Brandt; Charles E. Keegan; Thale Dillon; Tara M. Barrett

2009-01-01

This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products....

Economic feasibility of including game habitats in timber management systems

Treesearch

Lowell K. Halls

1975-01-01

Profits largely determine management decisions on commercial forest lands. Past decisions have therefore favored timber production over wildlife, and practices advantageous to wildlife were usually incidental. This paper explains how effective timber management on public and private lands can be coordinated with wildlife needs to obtain revenues from hunting as well...

Identifying and evaluating environmental impacts associated with timber harvest scheduling policies.

Treesearch

Robert M. Randall; Robert W. Sassaman

1979-01-01

Expected impacts on the ecosystem and nontimber benefits (that is, people's use of the resources—recreation, hunting, fishing, swimming, etc.) resulting from alternative timber harvest scheduling policies are identified and evaluated for the Mount Hood National Forest. Environmental criteria are established and used in evaluations of timber harvest and...

Chapter 2: Manufacturing Cross-laminated timber manufacturing

Treesearch

Borjen Yeh; Dave Kretschmann; Brad (Jianhe) Wang

2013-01-01

Cross-laminated timber ( CLT) is defined as a prefabricated solid engineered wood product made of at least three orthogonally bonded layers of solid-sawn lumber or structural composite lumber (SCL) that are laminated by gluing oflongitudinal and transverse layers with structural adhesives to form a solid rectangular-shaped, straight, and plane timber intended for roof...

Live Load Testing of Historic Covered Timber Bridges

Treesearch

Travis Hosteng; James Wacker; Brent Phares

2013-01-01

The National Historic Covered Bridge Preservation Program (NHCBP), sponsored by the Federal Highway Administration (FHWA), is intended to preserve covered timber bridge structures nationwide. Today, less than 700 covered timber bridges still exist in the United States and of those many are closed to vehicular traffic. Furthermore, a large percentage of the remaining...

Forest statistics of Indiana

Treesearch

The Forest Survey Organization Central States Forest Experiment Station

1953-01-01

The Forest Survey is conducted in the various regions by the forest experiment stations of the Forest Service. In Indiana the project is directed by the Central States Forest Experiment Station with headquarters in Columbus, Ohio. This Survey Release presents the more significant preliminary statistics on the forest area timber volume, timber growth, and timber drain...

Forest statistics of Kentucky

Treesearch

The Forest Survey Organization Central States Forest Experiment Station

1952-01-01

The Forest Survey is conducted in the various regions by the forest experiment stations of the Forest Service. In Kentucky the project is directed by the Central States Forest Experiment Station with headquarters in Columbus, Ohio. This Survey Release presents the more significant preliminary statistics on the forest area, timber volume, timber growth, and timber drain...

Estimating economic impacts of timber-based industry expansion in northeastern Minnesota.

Treesearch

Daniel L. Erkkila; Dietmar W. Rose; Allen L. Lundgren

1982-01-01

Analysis of current and projected timber supplies in northeastern Minnesota indicates that expanded timber-based industrial activity could be supported. The impacts of a hypothetical industrial development scenario, including construction of waferboard plants and a wood-fueled power plant, were estimated using an input-output model. Development had noticeable impacts...

Iowa timber industry--an assessment of timber product output and use, 2000.

Treesearch

Ronald J. Piva; Dennis D. Michel

2003-01-01

Discusses recent Iowa forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, and pulpwood in 2000. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood using mills and on disposition of mill residues.

Modeling Forest Timber Productivity in the South: Where Are We Today?

Treesearch

V. Clark Baldwin; Quang V. Cao

1999-01-01

The current southern species growth and yield prediction capability, new techniques utilized, and modeling trends over the last 17 years, were examined. Changing forest management objectives that emphasize more non-timber resources may have contributed to the continuing genetii lack of emphasis in modeling the timber productivity of the South's largest forest...

36 CFR 223.195 - Procedures for identifying and marking unprocessed timber.

Code of Federal Regulations, 2010 CFR

2010-07-01

... procedures required herein. (f) Waiver of branding requirements. Regional Foresters may waive the branding... individual timber sale basis, all or a portion of the branding requirements pursuant to paragraph (c)(2) of...) Regions 5 and 6. On an individual timber sale basis, the branding requirement pursuant to paragraph (c)(2...

Compatibility of intensive timber culture with recreation, water and wildlife management

Treesearch

Samuel P. Shaw

1977-01-01

Two principles of ecology can be applied to make management for recreation, water, and wildlife habitat compatible with timber management. They are diversity within plant communities (i.e. timber types) and interspersion of these diverse communities in place and time. Intensive cultural operations can be the tool to create the...

Indiana's timber resource, 1986: an analysis.

Treesearch

John S. Jr. Spencer; Neal P. Kingsley; Robert W. Mayer

1990-01-01

The third inventory of Indiana's timber resource shows that area of timberland increased from 3.9 to 4.3 million acres between 1967 and 1986, and growing-stock volume gained from 3.7 to 5.2 billion cubic feet. Presented are analysis and statistics on forest area and timber volume, growth, mortality, removals, and projections.

Indiana's timber.

Treesearch

John S. Jr. Spencer

1969-01-01

The second (1967) survey of Indiana's 4 million forested acres shows 3.5 billion cubic feet of growing stock on 3.9 million acres of commercial forest land. Presented are statistics on timber area, volume, growth, mortality, and use. Projections of timber growth, removals, and inventory are made to 1992, and possible future changes in the forest are discussed....

The growing timber resource of Michigan, 1966.

Treesearch

Clarence D. Chase; Ray E. Pfeifer; John S. Spencer

1969-01-01

The third (1966) Forest Survey of Michigan shows sizable gains in growing-stock and sawtimber volumes since 1955, despite a small decline in the commercial forest area. Presented are statistics on forest area and timber volume, growth, mortality, ownership, stocking, and use. Also presented is a projection of timber growth, removals, and inventory to 1996.

Indiana timber industry--an assessment of timber product output and use, 2000

Treesearch

Ronald J. Piva; Joey Gallion

2003-01-01

Discusses recent Indiana forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, and pulpwood in 2000. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood-using mills and on disposition of mill residues.

Timber resource of Missouri's Southwestern Ozarks, 1972.

Treesearch

Arnold J. Ostrom; Jerold T. Hahn

1974-01-01

The third timber inventory of Missouri's Southwestern Ozarks Forest Survey Unit shows a substantial decline in the volumes of both growing stock and sawtimber between 1959 and 1972. Commercial forest area also declined substantially during the same period. Presented are highlights and statistics on forest area and timber volume, growth, mortality, ownership, and...

Sawlog grades for eastern white pine

Treesearch

Myron D. Ostrander; Robert L. Brisbin; Robert L. Brisbin

1971-01-01

In 1957, the USDA Forest Service Log Grade Committee recommended a service-wide action program in log- and tree-grade research. Approval of the program in 1958 resulted in the establishment of five species-oriented timber-quality research projects covering several groups of commercially important timber species. The eastern softwood timber-quality project was activated...

Compatability of timber salvage operations with watershed values

Treesearch

Roger J. Poff

1989-01-01

Timber salvage on the Indian Burn was carried out without compromising watershed values. In some cases watershed condition was actually improved by providing ground cover, by removing trees that were a source of erosive water droplets, and by breaking up hydrophobic soil layers. Negative impacts of timber salvage on watersheds were minimized by using an...

South Dakota timber industry--an assessment of timber product output and use, 1999.

Treesearch

Ronald J. Piva; Gregory J. Josten

2003-01-01

Discusses recent South Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs in 1999. Reports on logging residue generated from timber harvest operations. Also reports on wood and bark residue generated at primary wood-using mills and on disposition of mill residues.

Computer software to estimate timber harvesting system production, cost, and revenue

Treesearch

Dr. John E. Baumgras; Dr. Chris B. LeDoux

1992-01-01

Large variations in timber harvesting cost and revenue can result from the differences between harvesting systems, the variable attributes of harvesting sites and timber stands, or changing product markets. Consequently, system and site specific estimates of production rates and costs are required to improve estimates of harvesting revenue. This paper describes...

36 CFR 223.118 - Appeal process for small business timber sale set-aside program share recomputation decisions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS Timber Sale Contracts...) raised by the appeal; (vi) If relevant, any specific references to any law, regulation, or policy that... receive an opportunity, in accordance with all applicable laws and regulations, to review and comment on...

43 CFR 5511.3-4 - Removal by agent.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber and...

43 CFR 5511.3-4 - Removal by agent.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber and...

43 CFR 5511.3-4 - Removal by agent.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber and...

43 CFR 5511.3-4 - Removal by agent.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF THE INTERIOR FOREST MANAGEMENT (5000) FREE USE OF TIMBER Free Use Regulations § 5511.3-4 Removal by agent. A free-use permittee may procure the timber by agent. Such agent shall not, however, be paid more than fair compensation for the time, labor and money expended in procuring timber and...

36 CFR 219.11 - Timber requirements based on the NFMA.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Timber requirements based on the NFMA. 219.11 Section 219.11 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE PLANNING National Forest System Land Management Planning § 219.11 Timber requirements based on the...

36 CFR 223.6 - Cutting and removal of timber in free-use areas.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Cutting and removal of timber in free-use areas. 223.6 Section 223.6 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND...

36 CFR 223.6 - Cutting and removal of timber in free-use areas.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Cutting and removal of timber in free-use areas. 223.6 Section 223.6 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND...

36 CFR 223.6 - Cutting and removal of timber in free-use areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Cutting and removal of timber in free-use areas. 223.6 Section 223.6 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND...

36 CFR 223.6 - Cutting and removal of timber in free-use areas.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Cutting and removal of timber in free-use areas. 223.6 Section 223.6 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND...

36 CFR 219.11 - Timber requirements based on the NFMA.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Timber requirements based on the NFMA. 219.11 Section 219.11 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE PLANNING National Forest System Land Management Planning § 219.11 Timber requirements based on the...

36 CFR 219.11 - Timber requirements based on the NFMA.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Timber requirements based on the NFMA. 219.11 Section 219.11 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE PLANNING National Forest System Land Management Planning § 219.11 Timber requirements based on the...

Development of a smart timber bridge girder with fiber optic sensors

Treesearch

James Wacker; Ursula Deza; Brent M. Phares; Terry J. Wipf

2010-01-01

Past timber bridge evaluation and maintenance efforts in the USA have principally focused on the internal integrity of timber components using various non-destructive evaluation tools to supplement visual inspection data. This project is part of a comprehensive effort to develop smart structure concepts for improving the long-term performance, maintenance, and...

Wyoming's forest products industry and timber harvest, 2005

Treesearch

Jason P. Brandt; Todd A. Morgan; Mike T. Thompson

2009-01-01

This report traces the flow of Wyoming's 2005 timber harvest through the primary timber-processing industry to the wholesale market and residue-using sectors. The structure, capacity, operations, and conditions of Wyoming's primary forest products industry are described; and volumes and uses of wood fiber are quantified. Historical and recent changes in...

Standing timber coefficients for Indiana walnut log production.

Treesearch

James E. Blyth; Edwin Kallio; John C. Callahan

1969-01-01

If the volume of walnut veneer logs and saw logs received at processing plants from Indiana forests is known, conversion factors developed in this paper can be used to determine how much timber was cut to provide these logs and the kinds of timber that were cut (sawtimber, cull trees, trees on nonforest land, etc.).

1969 Washington timber harvest.

Treesearch

Brian R. Wall

1970-01-01

Washington's timber harvest increased slightly in 1969 to a 40-year high of 7 billion board feet. This is slightly below the record timber harvest of 7.38 billion board feet established in 1829. Private timberland owners in western Washington increased their production 10.9 percent, accounting for most of the increase in the 1969 total harvest. In eastern...

26 CFR 1.611-3 - Rules applicable to timber.

Code of Federal Regulations, 2010 CFR

2010-04-01

... taxpayer making the return, as the result of the growth of the timber, of changes in standards of... for depletion) shall be revised. The depletion unit shall be changed when such revision has been made... until a change in facts requires another revision. (f) Determination of fair market value of timber...

36 CFR 223.195 - Procedures for identifying and marking unprocessed timber.

Code of Federal Regulations, 2011 CFR

2011-07-01

... procedures required herein. (f) Waiver of branding requirements. Regional Foresters may waive the branding... individual timber sale basis, all or a portion of the branding requirements pursuant to paragraph (c)(2) of...) Regions 5 and 6. On an individual timber sale basis, the branding requirement pursuant to paragraph (c)(2...

Appropriateness of Probit-9 in development of quarantine treatments for timber and timber commodities

Treesearch

Marcus Schortemeyer; Ken Thomas; Robert A. Haack; Adnan Uzunovic; Kelli Hoover; Jack A. Simpson; Cheryl A. Grgurinovic

2011-01-01

Following the increasing international phasing out of methyl bromide for quarantine purposes, the development of alternative treatments for timber pests becomes imperative. The international accreditation of new quarantine treatments requires verification standards that give confidence in the effectiveness of a treatment. Probit-9 mortality is a standard for treatment...

Optimal control of raw timber production processes

Treesearch

Ivan Kolenka

1978-01-01

This paper demonstrates the possibility of optimal planning and control of timber harvesting activ-ities with mathematical optimization models. The separate phases of timber harvesting are represented by coordinated models which can be used to select the optimal decision for the execution of any given phase. The models form a system whose components are connected and...

Integrated management of timber and deer: coastal forests of British Columbia and Alaska.

Treesearch

J.B. Nyberg; R.S. McNay; M.D. [and others] Kirchhoff

1989-01-01

Current techniques for integrating timber and deer management in coastal British Columbia and Alaska are reviewed and evaluated. Integration can be improved by setting objectives for deer habitat and timber, improving managers' knowledge of interactions, and providing planning tools to analyze alternative programs of forest management. A handbook designed to...