A behavioral window on the mind of the market: an application of the response time paradigm.

PubMed

Mast, Fred W; Zaltman, Gerald

2005-11-15

This article focuses on the role of implicit knowledge consumers have about particular brands, products or names. The major findings of several studies, conducted at the Mind of the Market Laboratory at Harvard Business School, are presented with specific emphasis on studies in which response time measurements were the core method. The results revealed that implicit measures provide a rich understanding of the meaning conveyed by a product or brand. Moreover, there is also considerable evidence that implicit measures may be better than traditional explicit measures as predictors of consumer behavior. We discuss the implications for the study of consumer behavior and the importance of combining several methods including neuroimaging, which has received recent attention by marketers, economists and social scientists.

75 FR 8082 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-23

... this invention, the colon registration problem is formulated as time series matching along the... on patients, less time-consuming, and more accurate. The effectiveness of the method was verified in...) compared to a traditional method based on dynamic time warping. Colon cancer is the second leading cause of...

DETECTION OF FECAL ENTEROCOCCI USING A REAL TIME PCR METHOD

EPA Science Inventory

In spite of their importance in public health, the detection of fecal enterococci is performed via culturing methods that are time consuming and that are subject to inaccuracies that relate to their culturable status. In order to address these problems, a real time PCR (TaqMan) ...

Method and apparatus for controlling electrode gap during vacuum consumable arc remelting

DOEpatents

Fisher, R.W.; Maroone, J.P.; Tipping, D.W.; Zanner, F.J.

During vacuum consumable arc remelting the electrode gap between a consumable electrode and a pool of molten metal is difficult to control. The present invention monitors drop shorts by detecting a decrease in the voltage between the consumable electrode and molten pool. The drop shorts and their associated voltage reductions occur as repetitive pulses which are closely correlated to the electrode gap. Thus, the method and apparatus of the present invention controls electrode gap based upon drop shorts detected from the monitored anode-cathode voltage. The number of drop shorts are accumulated, and each time the number of drop shorts reach a predetermined number, the average period between drop shorts is calculated from this predetermined number and the time in which this number is accumulated. This average drop short period is used in a drop short period electrode gap model which determines the actual electrode gap from the drop short. The actual electrode gap is then compared with a desired electrode gap which is selected to produce optimum operating conditions and the velocity of the consumable error is varied based upon the gap error. The consumable electrode is driven according to any prior art system at this velocity. In the preferred embodiment, a microprocessor system is utilized to perform the necessary calculations and further to monitor the duration of each drop short. If any drop short exceeds a preset duration period, the consumable electrode is rapidly retracted a predetermined distance to prevent bonding of the consumable electrode to the molten remelt.

Soft fruit traceability in food matrices using real-time PCR.

PubMed

Palmieri, Luisa; Bozza, Elisa; Giongo, Lara

2009-02-01

Food product authentication provides a means of monitoring and identifying products for consumer protection and regulatory compliance. There is a scarcity of analytical methods for confirming the identity of fruit pulp in products containing Soft Fruit. In the present work we have developed a very sensible qualitative and quantitative method to determine the presence of berry DNAs in different food matrices. To our knowledge, this is the first study that shows the applicability, to Soft Fruit traceability, of melting curve analysis and multiplexed fluorescent probes, in a Real-Time PCR platform. This methodology aims to protect the consumer from label misrepresentation.

An investigation of used electronics return flows: a data-driven approach to capture and predict consumers storage and utilization behavior.

PubMed

Sabbaghi, Mostafa; Esmaeilian, Behzad; Raihanian Mashhadi, Ardeshir; Behdad, Sara; Cade, Willie

2015-02-01

Consumers often have a tendency to store their used, old or un-functional electronics for a period of time before they discard them and return them back to the waste stream. This behavior increases the obsolescence rate of used still-functional products leading to lower profitability that could be resulted out of End-of-Use (EOU) treatments such as reuse, upgrade, and refurbishment. These types of behaviors are influenced by several product and consumer-related factors such as consumers' traits and lifestyles, technology evolution, product design features, product market value, and pro-environmental stimuli. Better understanding of different groups of consumers, their utilization and storage behavior and the connection of these behaviors with product design features helps Original Equipment Manufacturers (OEMs) and recycling and recovery industry to better overcome the challenges resulting from the undesirable storage of used products. This paper aims at providing insightful statistical analysis of Electronic Waste (e-waste) dynamic nature by studying the effects of design characteristics, brand and consumer type on the electronics usage time and end of use time-in-storage. A database consisting of 10,063 Hard Disk Drives (HDD) of used personal computers returned back to a remanufacturing facility located in Chicago, IL, USA during 2011-2013 has been selected as the base for this study. The results show that commercial consumers have stored computers more than household consumers regardless of brand and capacity factors. Moreover, a heterogeneous storage behavior is observed for different brands of HDDs regardless of capacity and consumer type factors. Finally, the storage behavior trends are projected for short-time forecasting and the storage times are precisely predicted by applying machine learning methods. Copyright © 2014 Elsevier Ltd. All rights reserved.

A qualitative evaluation of New Zealand consumers perceptions of general practice nurses

PubMed Central

2013-01-01

Background An important consideration in health service delivery is ensuring that services meet consumer needs and that consumers are satisfied with service delivery. Patient satisfaction can impact on compliance with suggested treatments and therefore impact on health outcomes. Comparatively few studies have explored consumer satisfaction with nurses in general practice. Methods A sub-group of 18 consumers from a larger quantitative evaluation of consumer satisfaction with New Zealand general practice nurses participated in semi-structured telephone interviews. Interview data was analysed using thematic analysis. Results Four major themes emerged from the data. These themes highlighted that, despite confusion experienced by some consumers regarding the practice nurse role, consumers were happy with the level of care provided by them. Consumers felt valued by Practice Nurses and considered them competent and highly knowledgeable. Findings also convey that consumers appreciate the accessibility and financial benefits of utilising the services of practice nurses. Conclusions Consumers are highly satisfied with practice nurse service delivery and value their relationships with these health professionals. Consumers revealed that greater clarity around the practice nurse role and their scope of practice may enhance their utilisation. Spreading the message of practice nurses being the right person to deliver care, within their scope of practice, at the right time may have the potential to provide more timely care within the primary care setting. PMID:23433311

Consumer preference for dinoprostone vaginal gel using stated preference discrete choice modelling.

PubMed

Taylor, Susan; Armour, Carol

2003-01-01

To assess consumer preference for two methods of induction of labour using stated preference discrete choice modelling. The methods of induction were artificial rupture of the membranes (ARM) plus oxytocin and dinoprostone (prostaglandin E(2)) vaginal gel, followed by oxytocin if necessary. Consumer preference was measured in terms of willingness to pay for each of the attributes. These attributes were the method of administration, place of care, length of time from induction to delivery, need for epidural anaesthetic, type of delivery and cost. Levels were assigned to each of the attributes. Pregnant women attending a public hospital antenatal clinic were asked to read a description of the two methods and then to choose between them in 18 different scenarios in which the levels of the attributes were varied. Women were willing to pay 11 Australian dollars for a 1% reduction in the chance of needing oxytocin as well as the gel and 55 Australian dollars for every 1 hour reduction in the length of time from induction to delivery. For a 1% reduction in the chance of needing an epidural anaesthetic or Caesarean section, women expressed a willingness to pay of 20 Australian dollars and 90 Australian dollars, respectively. All estimates were obtained in 1998 and expressed in Australian dollars (1 Australian dollar = 0.63 US dollars). Women valued the less invasive method of administration of the gel and the associated greater freedom of movement during labour. However, they valued the shorter time from induction to delivery associated with ARM plus oxytocin more highly. A policy which allows women access to the gel for up to two doses would accommodate this consumer preference.

A Conceptual Model of Leisure-Time Choice Behavior.

ERIC Educational Resources Information Center

Bergier, Michel J.

1981-01-01

Methods of studying the gap between predisposition and actual behavior of consumers of spectator sports is discussed. A model is drawn from the areas of behavioral sciences, consumer behavior, and leisure research. The model is constructed around the premise that choice is primarily a function of personal, product, and environmental factors. (JN)

Soft Fruit Traceability in Food Matrices using Real-Time PCR

PubMed Central

Palmieri, Luisa; Bozza, Elisa; Giongo, Lara

2009-01-01

Food product authentication provides a means of monitoring and identifying products for consumer protection and regulatory compliance. There is a scarcity of analytical methods for confirming the identity of fruit pulp in products containing Soft Fruit. In the present work we have developed a very sensible qualitative and quantitative method to determine the presence of berry DNAs in different food matrices. To our knowledge, this is the first study that shows the applicability, to Soft Fruit traceability, of melting curve analysis and multiplexed fluorescent probes, in a Real-Time PCR platform. This methodology aims to protect the consumer from label misrepresentation. PMID:22253987

Laser-Induced Damage as a Function of Dielectric Properties at 1.06 Micrometers

DTIC Science & Technology

1976-07-01

properties and manufacturing techniques of thin films applied to optical substrates were examined. A prima purpose of this study was to correlate the...field Sintensity distributions. This method, although time consuming , indicated a proper selection of 1.9 ± 0.05 m. The 1.8-rm aperture was no...although very time consuming and difficult to perform and analyze. For this reason the FECO measurement was used in calculations in- volving surface

Solid fat content measurement as a substitute for total polar compound analysis

USDA-ARS?s Scientific Manuscript database

Monitoring of oxidative degradation in frying oils is essential for determining an appropriate discard time. The most reliable method for monitoring the extent of oxidation in edible oils is the determination of total polar compounds. However, this method is time-consuming and not practical to execu...

Solid fat content measurement as an alternative to total polar compound analysis

USDA-ARS?s Scientific Manuscript database

Monitoring of oxidative degradation in frying oils is essential for determining an appropriate discard time. The most reliable method for monitoring the extent of oxidation in edible oils is the determination of total polar compounds (TPC). However, this method is time-consuming and not practical ...

Alternative Approaches for Screening Contaminated Sediments and Soils for PCDD/PCDF

EPA Science Inventory

Generating analytical data for polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/PCDF) using the traditional high resolution mass spectrometry (HRMS) analysis method, EPA Method 1613B, is time-consuming and expensive. Consequently, alternative methods to ...

Strengthening steel bridge girders using CFRP.

DOT National Transportation Integrated Search

2010-06-01

While traditional retrofitting methods for steel bridge girders could be time consuming and uneconomical, an alternative repair method is suggested using Carbon Fiber Reinforced Polymers (CFRP) laminate strips, providing engineers with a competitive ...

Four-year monitoring of foodborne pathogens in raw milk sold by vending machines in Italy.

PubMed

Giacometti, Federica; Bonilauri, Paolo; Serraino, Andrea; Peli, Angelo; Amatiste, Simonetta; Arrigoni, Norma; Bianchi, Manila; Bilei, Stefano; Cascone, Giuseppe; Comin, Damiano; Daminelli, Paolo; Decastelli, Lucia; Fustini, Mattia; Mion, Renzo; Petruzzelli, Annalisa; Rosmini, Roberto; Rugna, Gianluca; Tamba, Marco; Tonucci, Franco; Bolzoni, Giuseppe

2013-11-01

Prevalence data were collected from official microbiological records monitoring four selected foodborne pathogens (Salmonella, Listeria monocytogenes, Escherichia coli O157:H7, and Campylobacter jejuni) in raw milk sold by self-service vending machines in seven Italian regions (60,907 samples from 1,239 vending machines) from 2008 to 2011. Data from samples analyzed by both culture-based and real-time PCR methods were collected in one region. One hundred raw milk consumers in four regions were interviewed while purchasing raw milk from vending machines. One hundred seventy-eight of 60,907 samples were positive for one of the four foodborne pathogens investigated: 18 samples were positive for Salmonella, 83 for L. monocytogenes, 24 for E. coli O157:H7, and 53 for C. jejuni in the seven regions investigated. No significant differences in prevalence were found among regions, but a significant increase in C. jejuni prevalence was observed over the years of the study. A comparison of the two analysis methods revealed that real-time PCR was 2.71 to 9.40 times more sensitive than the culture-based method. Data on consumer habits revealed that some behaviors may enhance the risk of infection linked to raw milk consumption: 37% of consumers did not boil milk before consumption, 93% never used an insulated bag to transport raw milk home, and raw milk was consumed by children younger than 5 years of age. These results emphasize that end-product controls alone are not sufficient to guarantee an adequate level of consumer protection. The beta distribution of positive samples in this study and the data on raw milk consumer habits will be useful for the development of a national quantitative risk assessment of Salmonella, L. monocytogenes, E. coli O157, and C. jejuni infection associated with raw milk consumption.

Consumer Satisfaction with Antipsychotic Medication Monitoring Appointments: The Role of Consumer-Prescriber Communication Patterns

PubMed Central

Reich, Catherine M.; Hack, Samantha M.; Klingaman, Elizabeth A.; Brown, Clayton H.; Fang, Li Juan; Dixon, Lisa B.; Jahn, Danielle R.; Kreyenbuhl, Julie A.

2017-01-01

Objective The study was designed to explore patterns of prescriber communication behaviors as they relate to consumer satisfaction among a serious mental illness sample. Methods Recordings from 175 antipsychotic medication-monitoring appointments between veterans with psychiatric disorders and their prescribers were coded using the Roter Interaction Analysis System (RIAS) for communication behavioral patterns. Results The frequency of prescriber communication behaviors (i.e., facilitation, rapport, procedural, psychosocial, biomedical, and total utterances) did not reliably predict consumer satisfaction. The ratio of prescriber to consumer utterances did predict consumer satisfaction. Conclusion Consistent with client-centered care theory, antipsychotic medication consumers were more satisfied with their encounters when their prescriber did not dominate the conversation. Practice Implications Therefore, one potential recommendation from these findings could be for medication prescribers to spend more of their time listening to, rather than speaking with, their SMI consumers. PMID:28920491

Flow cytometry as a method for the evaluation of raw material, product and process in the dairy industry.

PubMed

Ruszczyńska, A; Szteyn, J; Wiszniewska-Laszczych, A

2007-01-01

Producing dairy products which are safe for consumers requires the constant monitoring of the microbiological quality of raw material, the production process itself and the end product. Traditional methods, still a "gold standard", require a specialized laboratory working on recognized and validated methods. Obtaining results is time- and labor-consuming and do not allow rapid evaluation. Hence, there is a need for a rapid, precise method enabling the real-time monitoring of microbiological quality, and flow cytometry serves this function well. It is based on labeling cells suspended in a solution with fluorescent dyes and pumping them into a measurement zone where they are exposed to a precisely focused laser beam. This paper is aimed at presenting the possibilities of applying flow cytometry in the dairy industry.

Patient-based surveying: a cost-effective approach for reaching large markets.

PubMed

Byer, S

1995-01-01

Member-based surveying is an important tool for managed care companies to discern newer and better ways in which to keep their current members satisfied, develop products that will attract new members, and to gauge changes of course in health consumer opinion. This article discusses a consumer friendly and cost-effective method to survey members and the general public that has produced a very positive response for a modest investment. The response rate will likely improve over time as the method gains broader acceptance.

Optimizing Industrial Consumer Demand Response Through Disaggregation, Hour-Ahead Pricing, and Momentary Autonomous Control

NASA Astrophysics Data System (ADS)

Abdulaal, Ahmed

The work in this study addresses the current limitations of the price-driven demand response (DR) approach. Mainly, the dependability on consumers to respond in an energy aware conduct, the response timeliness, the difficulty of applying DR in a busy industrial environment, and the problem of load synchronization are of utmost concern. In order to conduct a simulation study, realistic price simulation model and consumers' building load models are created using real data. DR action is optimized using an autonomous control method, which eliminates the dependency on frequent consumer engagement. Since load scheduling and long-term planning approaches are infeasible in the industrial environment, the proposed method utilizes instantaneous DR in response to hour-ahead price signals (RTP-HA). Preliminary simulation results concluded savings at the consumer-side at the cost of increased supplier-side burden due to the aggregate effect of the universal DR policies. Therefore, a consumer disaggregation strategy is briefly discussed. Finally, a refined discrete-continuous control system is presented, which utilizes multi-objective Pareto optimization, evolutionary programming, utility functions, and bidirectional loads. Demonstrated through a virtual testbed fit with real data, the new system achieves momentary optimized DR in real-time while maximizing the consumer's wellbeing.

An investigation of used electronics return flows: A data-driven approach to capture and predict consumers storage and utilization behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabbaghi, Mostafa, E-mail: mostafas@buffalo.edu; Esmaeilian, Behzad, E-mail: b.esmaeilian@neu.edu; Raihanian Mashhadi, Ardeshir, E-mail: ardeshir@buffalo.edu

Highlights: • We analyzed a data set of HDDs returned back to an e-waste collection site. • We studied factors that affect the storage behavior. • Consumer type, brand and size are among factors which affect the storage behavior. • Commercial consumers have stored computers more than household consumers. • Machine learning models were used to predict the storage behavior. - Abstract: Consumers often have a tendency to store their used, old or un-functional electronics for a period of time before they discard them and return them back to the waste stream. This behavior increases the obsolescence rate of usedmore » still-functional products leading to lower profitability that could be resulted out of End-of-Use (EOU) treatments such as reuse, upgrade, and refurbishment. These types of behaviors are influenced by several product and consumer-related factors such as consumers’ traits and lifestyles, technology evolution, product design features, product market value, and pro-environmental stimuli. Better understanding of different groups of consumers, their utilization and storage behavior and the connection of these behaviors with product design features helps Original Equipment Manufacturers (OEMs) and recycling and recovery industry to better overcome the challenges resulting from the undesirable storage of used products. This paper aims at providing insightful statistical analysis of Electronic Waste (e-waste) dynamic nature by studying the effects of design characteristics, brand and consumer type on the electronics usage time and end of use time-in-storage. A database consisting of 10,063 Hard Disk Drives (HDD) of used personal computers returned back to a remanufacturing facility located in Chicago, IL, USA during 2011–2013 has been selected as the base for this study. The results show that commercial consumers have stored computers more than household consumers regardless of brand and capacity factors. Moreover, a heterogeneous storage behavior is observed for different brands of HDDs regardless of capacity and consumer type factors. Finally, the storage behavior trends are projected for short-time forecasting and the storage times are precisely predicted by applying machine learning methods.« less

Fast-tracking determination of homozygous transgenic lines and transgene stacking using a reliable quantitative real-time PCR assay.

PubMed

Wang, Xianghong; Jiang, Daiming; Yang, Daichang

2015-01-01

The selection of homozygous lines is a crucial step in the characterization of newly generated transgenic plants. This is particularly time- and labor-consuming when transgenic stacking is required. Here, we report a fast and accurate method based on quantitative real-time PCR with a rice gene RBE4 as a reference gene for selection of homozygous lines when using multiple transgenic stacking in rice. Use of this method allowed can be used to determine the stacking of up to three transgenes within four generations. Selection accuracy reached 100 % for a single locus and 92.3 % for two loci. This method confers distinct advantages over current transgenic research methodologies, as it is more accurate, rapid, and reliable. Therefore, this protocol could be used to efficiently select homozygous plants and to expedite time- and labor-consuming processes normally required for multiple transgene stacking. This protocol was standardized for determination of multiple gene stacking in molecular breeding via marker-assisted selection.

Computational Methods for Analyzing Health News Coverage

ERIC Educational Resources Information Center

McFarlane, Delano J.

2011-01-01

Researchers that investigate the media's coverage of health have historically relied on keyword searches to retrieve relevant health news coverage, and manual content analysis methods to categorize and score health news text. These methods are problematic. Manual content analysis methods are labor intensive, time consuming, and inherently…

Consumption patterns of sweet drinks in a population of Australian children and adolescents (2003–2008)

PubMed Central

2012-01-01

Background Intake of sweet drinks has previously been associated with the development of overweight and obesity among children and adolescents. The present study aimed to assess the consumption pattern of sweet drinks in a population of children and adolescents in Victoria, Australia. Methods Data on 1,604 children and adolescents (4–18 years) from the comparison groups of two quasi-experimental intervention studies from Victoria, Australia were analysed. Sweet drink consumption (soft drink and fruit juice/cordial) was assessed as one day’s intake and typical intake over the last week or month at two time points between 2003 and 2008 (mean time between measurement: 2.2 years). Results Assessed using dietary recalls, more than 70% of the children and adolescents consumed sweet drinks, with no difference between age groups (p = 0.28). The median intake among consumers was 500 ml and almost a third consumed more than 750 ml per day. More children and adolescents consumed fruit juice/cordial (69%) than soft drink (33%) (p < 0.0001) and in larger volumes (median intake fruit juice/cordial: 500 ml and soft drink: 375 ml). Secular changes in sweet drink consumption were observed with a lower proportion of children and adolescents consuming sweet drinks at time 2 compared to time 1 (significant for age group 8 to <10 years, p = 0.001). Conclusion The proportion of Australian children and adolescents from the state of Victoria consuming sweet drinks has been stable or decreasing, although a high proportion of this sample consumed sweet drinks, especially fruit juice/cordial at both time points. PMID:22966937

“I Have No Clue What I Drunk Last Night” Using Smartphone Technology to Compare In-Vivo and Retrospective Self-Reports of Alcohol Consumption

PubMed Central

Monk, Rebecca Louise; Heim, Derek; Qureshi, Adam; Price, Alan

2015-01-01

Aim This research compared real-time measurements of alcohol consumption with retrospective accounts of alcohol consumption to examine possible discrepancies between, and contextual influences on, the different accounts. Method Building on previous investigations, a specifically designed Smartphone technology was utilized to measure alcohol consumption and contextual influences in de facto real-time. Real-time data (a total of 10,560 data points relating to type and number of drinks and current social / environmental context) were compared with daily and weekly retrospective accounts of alcohol consumption. Results Participants reported consuming more alcoholic drinks during real-time assessment than retrospectively. For daily accounts a higher number of drinks consumed in real-time was related to a higher discrepancy between real-time and retrospective accounts. This effect was found across all drink types but was not shaped by social and environmental contexts. Higher in-vivo alcohol consumption appeared to be related to a higher discrepancy in retrospectively reported weekly consumption for alcohol beverage types other than wine. When including contextual factors into the statistical models, being with two or more friends (as opposed to being alone) decreased the discrepancy between real-time and retrospective reports, whilst being in the pub (relative to being at home) was associated with greater discrepancies. Conclusions Overall, retrospective accounts may underestimate the amount of actual, real-time alcohol consumed. Increased consumption may also exacerbate differences between real-time and retrospective accounts. Nonetheless, this is not a global effect as environmental and social contexts interact with the type of alcohol consumed and the time frame given for reporting (weekly vs. daily retrospective). A degree of caution therefore appears warranted with regards to the use of retrospective self-report methods of recording alcohol consumption. Whilst real-time sampling is unlikely to be completely error free, it may be better able to account for social and environmental influences on self-reported consumption. PMID:25992573

Consumer behaviour in the waiting area.

PubMed

Mobach, Mark P

2007-02-01

To determine consumer behaviour in the pharmacy waiting area. The applied methods for data-collection were direct observations. Three Dutch community pharmacies were selected for the study. The topics in the observation list were based on available services at each waiting area (brochures, books, illuminated new trailer, children's play area, etc.). Per patient each activity was registered, and at each pharmacy the behaviour was studied for 2 weeks. Most patients only waited during the waiting time at the studied pharmacies. Few consumers obtained written information during their wait. The waiting area may have latent possibilities to expand the information function of the pharmacy and combine this with other activities that distract the consumer from the wait. Transdisciplinary research, combining knowledge from pharmacy practice research with consumer research, has been a useful approach to add information on queueing behaviour of consumers.

Energy efficient sensor scheduling with a mobile sink node for the target tracking application.

PubMed

Maheswararajah, Suhinthan; Halgamuge, Saman; Premaratne, Malin

2009-01-01

Measurement losses adversely affect the performance of target tracking. The sensor network's life span depends on how efficiently the sensor nodes consume energy. In this paper, we focus on minimizing the total energy consumed by the sensor nodes whilst avoiding measurement losses. Since transmitting data over a long distance consumes a significant amount of energy, a mobile sink node collects the measurements and transmits them to the base station. We assume that the default transmission range of the activated sensor node is limited and it can be increased to maximum range only if the mobile sink node is out-side the default transmission range. Moreover, the active sensor node can be changed after a certain time period. The problem is to select an optimal sensor sequence which minimizes the total energy consumed by the sensor nodes. In this paper, we consider two different problems depend on the mobile sink node's path. First, we assume that the mobile sink node's position is known for the entire time horizon and use the dynamic programming technique to solve the problem. Second, the position of the sink node is varied over time according to a known Markov chain, and the problem is solved by stochastic dynamic programming. We also present sub-optimal methods to solve our problem. A numerical example is presented in order to discuss the proposed methods' performance.

Energy Efficient Sensor Scheduling with a Mobile Sink Node for the Target Tracking Application

PubMed Central

Maheswararajah, Suhinthan; Halgamuge, Saman; Premaratne, Malin

2009-01-01

Measurement losses adversely affect the performance of target tracking. The sensor network's life span depends on how efficiently the sensor nodes consume energy. In this paper, we focus on minimizing the total energy consumed by the sensor nodes whilst avoiding measurement losses. Since transmitting data over a long distance consumes a significant amount of energy, a mobile sink node collects the measurements and transmits them to the base station. We assume that the default transmission range of the activated sensor node is limited and it can be increased to maximum range only if the mobile sink node is out-side the default transmission range. Moreover, the active sensor node can be changed after a certain time period. The problem is to select an optimal sensor sequence which minimizes the total energy consumed by the sensor nodes. In this paper, we consider two different problems depend on the mobile sink node's path. First, we assume that the mobile sink node's position is known for the entire time horizon and use the dynamic programming technique to solve the problem. Second, the position of the sink node is varied over time according to a known Markov chain, and the problem is solved by stochastic dynamic programming. We also present sub-optimal methods to solve our problem. A numerical example is presented in order to discuss the proposed methods' performance PMID:22399934

Covert checks by standardised patients of general practitioners' delivery of new periodic health examinations: clustered cross-sectional study from a consumer organisation

PubMed Central

Thaler, Kylie; Harris, Mark F

2012-01-01

Objective To assess if data collected by a consumer organisation are valid for a health service research study on physicians' performance in preventive care. To report first results of the analysis of physicians performance like consultation time and guideline adherence in history taking. Design Secondary data analysis of a clustered cross-sectional direct observation survey. Setting General practitioners (GPs) in Vienna, Austria, visited unannounced by mystery shoppers (incognito standardised patients (ISPs)). Participants 21 randomly selected GPs were visited by two different ISPs each. 40 observation protocols were realised. Main outcome measures Robustness of sampling and data collection by the consumer organisation. GPs consultation and waiting times, guideline adherence in history taking. Results The double stratified random sampling method was robust and representative for the private and contracted GPs mix of Vienna. The clinical scenarios presented by the ISPs were valid and believable, and no GP realised the ISPs were not genuine patients. The average consultation time was 46 min (95% CI 37 to 54 min). Waiting times differed more than consultation times between private and contracted GPs. No differences between private and contracted GPs in terms of adherence to the evidence-based guidelines regarding history taking including questions regarding alcohol use were found. According to the analysis, 20% of the GPs took a perfect history (95% CI 9% to 39%). Conclusions The analysis of secondary data collected by a consumer organisation was a valid method for drawing conclusions about GPs preventive practice. Initial results, like consultation times longer than anticipated, and the moderate quality of history taking encourage continuing the analysis on available clinical data. PMID:22872721

[Mechanical Shimming Method and Implementation for Permanent Magnet of MRI System].

PubMed

Xue, Tingqiang; Chen, Jinjun

2015-03-01

A mechanical shimming method and device for permanent magnet of MRI system has been developed to meet its stringent homogeneity requirement without time-consuming passive shimming on site, installation and adjustment efficiency has been increased.

Consumer Outcomes After Implementing CommonGround as an Approach to Shared Decision Making.

PubMed

Salyers, Michelle P; Fukui, Sadaaki; Bonfils, Kelsey A; Firmin, Ruth L; Luther, Lauren; Goscha, Rick; Rapp, Charles A; Holter, Mark C

2017-03-01

The authors examined consumer outcomes before and after implementing CommonGround, a computer-based shared decision-making program. Consumers with severe mental illness (N=167) were interviewed prior to implementation and 12 and 18 months later to assess changes in active treatment involvement, symptoms, and recovery-related attitudes. Providers also rated consumers on level of treatment involvement. Most consumers used CommonGround at least once (67%), but few used the program regularly. Mixed-effects regression analyses showed improvement in self-reported symptoms and recovery attitudes. Self-reported treatment involvement did not change; however, for a subset of consumers with the same providers over time (N=83), the providers rated consumers as more active in treatment. This study adds to the growing literature on tools to support shared decision making, showing the potential benefits of CommonGround for improving recovery outcomes. More work is needed to better engage consumers in CommonGround and to test the approach with more rigorous methods.

Increasing value and reducing waste in data extraction for systematic reviews: tracking data in data extraction forms.

PubMed

Shokraneh, Farhad; Adams, Clive E

2017-08-04

Data extraction is one of the most time-consuming tasks in performing a systematic review. Extraction is often onto some sort of form. Sharing completed forms can be used to check quality and accuracy of extraction or for re-cycling data to other researchers for updating. However, validating each piece of extracted data is time-consuming and linking to source problematic.In this methodology paper, we summarize three methods for reporting the location of data in original full-text reports, comparing their advantages and disadvantages.

Comparison of viable plate count, turbidity measurement and real-time PCR for quantification of Porphyromonas gingivalis.

PubMed

Clais, S; Boulet, G; Van Kerckhoven, M; Lanckacker, E; Delputte, P; Maes, L; Cos, P

2015-01-01

The viable plate count (VPC) is considered as the reference method for bacterial enumeration in periodontal microbiology but shows some important limitations for anaerobic bacteria. As anaerobes such as Porphyromonas gingivalis are difficult to culture, VPC becomes time-consuming and less sensitive. Hence, efficient normalization of experimental data to bacterial cell count requires alternative rapid and reliable quantification methods. This study compared the performance of VPC with that of turbidity measurement and real-time PCR (qPCR) in an experimental context using highly concentrated bacterial suspensions. Our TaqMan-based qPCR assay for P. gingivalis 16S rRNA proved to be sensitive and specific. Turbidity measurements offer a fast method to assess P. gingivalis growth, but suffer from high variability and a limited dynamic range. VPC was very time-consuming and less repeatable than qPCR. Our study concludes that qPCR provides the most rapid and precise approach for P. gingivalis quantification. Although our data were gathered in a specific research context, we believe that our conclusions on the inferior performance of VPC and turbidity measurements in comparison to qPCR can be extended to other research and clinical settings and even to other difficult-to-culture micro-organisms. Various clinical and research settings require fast and reliable quantification of bacterial suspensions. The viable plate count method (VPC) is generally seen as 'the gold standard' for bacterial enumeration. However, VPC-based quantification of anaerobes such as Porphyromonas gingivalis is time-consuming due to their stringent growth requirements and shows poor repeatability. Comparison of VPC, turbidity measurement and TaqMan-based qPCR demonstrated that qPCR possesses important advantages regarding speed, accuracy and repeatability. © 2014 The Society for Applied Microbiology.

Using qPCR for Water Microbial Risk Assessments

EPA Science Inventory

Microbial risk assessment (MRA) has traditionally utilized microbiological data that was obtained by culture-based techniques that are expensive and time consuming. With the advent of PCR methods there is a realistic opportunity to conduct MRA studies economically, in less time,...

An analytics of electricity consumption characteristics based on principal component analysis

NASA Astrophysics Data System (ADS)

Feng, Junshu

2018-02-01

Abstract . More detailed analysis of the electricity consumption characteristics can make demand side management (DSM) much more targeted. In this paper, an analytics of electricity consumption characteristics based on principal component analysis (PCA) is given, which the PCA method can be used in to extract the main typical characteristics of electricity consumers. Then, electricity consumption characteristics matrix is designed, which can make a comparison of different typical electricity consumption characteristics between different types of consumers, such as industrial consumers, commercial consumers and residents. In our case study, the electricity consumption has been mainly divided into four characteristics: extreme peak using, peak using, peak-shifting using and others. Moreover, it has been found that industrial consumers shift their peak load often, meanwhile commercial and residential consumers have more peak-time consumption. The conclusions can provide decision support of DSM for the government and power providers.

Optimal RTP Based Power Scheduling for Residential Load in Smart Grid

NASA Astrophysics Data System (ADS)

Joshi, Hemant I.; Pandya, Vivek J.

2015-12-01

To match supply and demand, shifting of load from peak period to off-peak period is one of the effective solutions. Presently flat rate tariff is used in major part of the world. This type of tariff doesn't give incentives to the customers if they use electrical energy during off-peak period. If real time pricing (RTP) tariff is used, consumers can be encouraged to use energy during off-peak period. Due to advancement in information and communication technology, two-way communications is possible between consumers and utility. To implement this technique in smart grid, home energy controller (HEC), smart meters, home area network (HAN) and communication link between consumers and utility are required. HEC interacts automatically by running an algorithm to find optimal energy consumption schedule for each consumer. However, all the consumers are not allowed to shift their load simultaneously during off-peak period to avoid rebound peak condition. Peak to average ratio (PAR) is considered while carrying out minimization problem. Linear programming problem (LPP) method is used for minimization. The simulation results of this work show the effectiveness of the minimization method adopted. The hardware work is in progress and the program based on the method described here will be made to solve real problem.

Essential tips for measuring levels of consumer satisfaction with rural health service quality.

PubMed

Smith, Karly B; Humphreys, John S; Jones, Judith A

2006-01-01

Quality of health services is a matter of increasing importance to health authorities. Monitoring consumer satisfaction of health care is an important input to improving the quality of health services. This article highlights a number of important considerations learned from rural consumer studies relevant to ensuring the valid measurement of consumer satisfaction with rural health services, as a means of contributing to quality improvements. This article compares two methods of analysing rural consumers' satisfaction with healthcare services. In one study of three rural communities in western New South Wales (NSW) and eight communities in north-west Victoria, residents were asked to rate their satisfaction with five key aspects of local health services (availability, geographical accessibility, choice, continuity, economic accessibility as measured by affordability) using a 5 point Likert scale from: one = very satisfied to five = very dissatisfied. An alternative method of assessing levels of consumer satisfaction was undertaken in the survey of eight rural communities in north-west Victoria by investigating consumers' experiences with actual and potential complaints in relation to health services. Both the NSW and Victorian respondents reported generally high levels of satisfaction with the five indicators of quality of health care. At the same time, 11% of Victorian study respondents reported having made a complaint about a health service in the previous 12 months, and one-third of the Victorian respondents reported experiences with their health services about which they wanted to complain but did not, over the same period. Interpretation of apparent consumer satisfaction with their health services must take particular account of the measures and research methods used. In assessing consumer satisfaction with health services in rural areas, specific attention should be given to maximising the engagement of rural consumers in order to ensure representativeness of findings, and to minimise possible biases in satisfaction ratings associated with the use of particular tools.

Retrovirus purification: method that conserves envelope glycoprotein and maximizes infectivity.

PubMed Central

McGrath, M; Witte, O; Pincus, T; Weissman, I L

1978-01-01

A Sepharose 4B chromatographic method for purification of retroviruses is described which was less time consuming, increased purified virus yields, conserved viral glycoprotein, and increased recovery of biological infectivity in comparison with conventional sucrose gradient ultracentrifugation techniques. Images PMID:205680

Rapid extraction of virus-contaminated hemocytes from oysters

USDA-ARS?s Scientific Manuscript database

Rapid viral detection methods are necessary to employ diagnostic testing for viral contamination in shellfish to prevent and control foodborne illness. Current shellfish viral RNA extraction methods, which are time-consuming and not applicable for routine monitoring, require the testing of whole or ...

Image based method for aberration measurement of lithographic tools

NASA Astrophysics Data System (ADS)

Xu, Shuang; Tao, Bo; Guo, Yongxing; Li, Gongfa

2018-01-01

Information of lens aberration of lithographic tools is important as it directly affects the intensity distribution in the image plane. Zernike polynomials are commonly used for a mathematical description of lens aberrations. Due to the advantage of lower cost and easier implementation of tools, image based measurement techniques have been widely used. Lithographic tools are typically partially coherent systems that can be described by a bilinear model, which entails time consuming calculations and does not lend a simple and intuitive relationship between lens aberrations and the resulted images. Previous methods for retrieving lens aberrations in such partially coherent systems involve through-focus image measurements and time-consuming iterative algorithms. In this work, we propose a method for aberration measurement in lithographic tools, which only requires measuring two images of intensity distribution. Two linear formulations are derived in matrix forms that directly relate the measured images to the unknown Zernike coefficients. Consequently, an efficient non-iterative solution is obtained.

Testing the accuracy of timing reports in visual timing tasks with a consumer-grade digital camera.

PubMed

Smyth, Rachael E; Oram Cardy, Janis; Purcell, David

2017-06-01

This study tested the accuracy of a visual timing task using a readily available and relatively inexpensive consumer grade digital camera. A visual inspection time task was recorded using short high-speed video clips and the timing as reported by the task's program was compared to the timing as recorded in the video clips. Discrepancies in these two timing reports were investigated further and based on display refresh rate, a decision was made whether the discrepancy was large enough to affect the results as reported by the task. In this particular study, the errors in timing were not large enough to impact the results of the study. The procedure presented in this article offers an alternative method for performing a timing test, which uses readily available hardware and can be used to test the timing in any software program on any operating system and display.

Climate-based models for pulsed resources improve predictability of consumer population dynamics: outbreaks of house mice in forest ecosystems.

PubMed

Holland, E Penelope; James, Alex; Ruscoe, Wendy A; Pech, Roger P; Byrom, Andrea E

2015-01-01

Accurate predictions of the timing and magnitude of consumer responses to episodic seeding events (masts) are important for understanding ecosystem dynamics and for managing outbreaks of invasive species generated by masts. While models relating consumer populations to resource fluctuations have been developed successfully for a range of natural and modified ecosystems, a critical gap that needs addressing is better prediction of resource pulses. A recent model used change in summer temperature from one year to the next (ΔT) for predicting masts for forest and grassland plants in New Zealand. We extend this climate-based method in the framework of a model for consumer-resource dynamics to predict invasive house mouse (Mus musculus) outbreaks in forest ecosystems. Compared with previous mast models based on absolute temperature, the ΔT method for predicting masts resulted in an improved model for mouse population dynamics. There was also a threshold effect of ΔT on the likelihood of an outbreak occurring. The improved climate-based method for predicting resource pulses and consumer responses provides a straightforward rule of thumb for determining, with one year's advance warning, whether management intervention might be required in invaded ecosystems. The approach could be applied to consumer-resource systems worldwide where climatic variables are used to model the size and duration of resource pulses, and may have particular relevance for ecosystems where global change scenarios predict increased variability in climatic events.

Daily Behavior Report Cards as Evidence-Based Practice for Teachers

ERIC Educational Resources Information Center

Vannest, Kimberly J.; Burke, Mack D.; Sauber, Stephanie B.; Davis, John L.; Davis, Cole R.

2011-01-01

Easy-to-use progress-monitoring and intervention techniques are attractive because most teachers are crunched for time and teacher instructional time is often consumed with paperwork, especially for progress monitoring and discipline. Some studies indicate up to 50% of a special educator's time may be spent on paperwork. Methods that serve a dual…

Time-lapse monitoring of soil water content using electromagnetic conductivity imaging

USDA-ARS?s Scientific Manuscript database

The volumetric soil water content (VWC) is fundamental to agriculture. Unfortunately, the universally accepted thermogravimetric method is labour intensive and time-consuming to use for field-scale monitoring. Electromagnetic (EM) induction instruments have proven to be useful in mapping the spatio-...

Analysis of carbohydrate deficient transferrin by capillary zone electrophoresis.

PubMed

Prasad, R; Stout, R L; Coffin, D; Smith, J

1997-09-01

We report a capillary zone electrophoresis method to separate the various sialylated isoforms of transferrin. The separation is carried out under nondenaturing conditions and at basic pH. Under these conditions, transferrin exhibits two major and three minor peaks. Plasma samples from a population consuming varying amounts of alcohol at different intervals were studied. A cut-off value of 3% carbohydrate deficient transferrin (CDT: disialo, monosialo, and asialo transferrin), results in a clinical sensitivity of 88% in a population consuming at least 70 g/day alcohol for a minimum of two weeks. The sensitivity dropped significantly in a population consuming less than 70 g/day. This confirms previous reports of CDT as a specific marker for significant and chronic use of alcohol. Capillary electrophoresis offers an alternative method with respect to analysis time and throughput in the clinical laboratory.

Improved method for sectioning pectoral spines of catfish for age determination

USGS Publications Warehouse

Blouin, Marc A.; Hall, Glenda R.

1990-01-01

The advantages of this method are: (1) spine sections are clear, with uniform thickness and little tissue damage; (2) no time-consuming procedures are necessary; (3) the original spine remains intact for future sectioning; and (4) the thick, single blade does not warp.

Rapid qualitative and quantitative analysis of proanthocyanidin oligomers and polymers by UPLC-MS/MS

USDA-ARS?s Scientific Manuscript database

Proanthocyanidins (PAs) are a structurally complex and bioactive group of tannins. Detailed analysis of PA concentration, composition, and structure typically requires the use of one or more time-consuming analytical methods. For example, the commonly employed thiolysis and phloroglucinolysis method...

Fluorescence polarization immunoassays for rapid, accurate, and sensitive determination of mycotoxins

USDA-ARS?s Scientific Manuscript database

Analytical methods for the determination of mycotoxins in foods are commonly based on chromatographic techniques (GC, HPLC or LC-MS). Although these methods permit a sensitive and accurate determination of the analyte, they require skilled personnel and are time-consuming, expensive, and unsuitable ...

Laboratory microwave measurement of the moisture content in seed cotton and ginned cotton fiber

USDA-ARS?s Scientific Manuscript database

The timely and accurate measurement of cotton fiber moisture content is important, but the measurement is often performed by laborious, time-consuming laboratory oven drying methods. Microwave technology for measuring fiber moisture content directly (not for drying only) offers potential advantages...

RAPID DETECTION METHOD FOR E.COLI, ENTEROCOCCI AND BACTEROIDES IN RECREATIONAL WATER

EPA Science Inventory

Current methodology for determining fecal contamination of drinking water sources and recreational waters rely on the time-consuming process of bacterial multiplication and require at least 24 hours from the time of sampling to the possible determination that the water is unsafe ...

Systemic risk and spatiotemporal dynamics of the consumer market of China

NASA Astrophysics Data System (ADS)

Wang, Minggang; Tian, Lixin; Xu, Hua; Li, Weiyu; Du, Ruijin; Dong, Gaogao; Wang, Jie; Gu, Jiani

2017-05-01

The consumer price index (CPI) contains rich information of the consumer market, in order to characterize the essential characteristics of the consumer market of China, a novel method by using complex network theory is proposed to visualizing the evolution and transformation characteristics of correlated modes among the regional consumer markets. CPI data of 31 provinces and cities of China are selected as sample data. Underlying dynamics of time-evolving correlation networks are revealed. A formula to measure the systemic risk in the consumer market is designed. And the correlation modes transmission network of the regional consumer markets is obtained. Numerical simulations show that the consumer market network has co-movement, group-occurring and small-word property. Different regions played different roles in the consumer market of China. The risk in the consumer market presented a decreasing trend from April 2013 but remain at the high level. Different from the stochastic system, the consumer market of China both has the short-range correlation and the long-range correlation. The strength of correlation modes transmission network basically satisfies a power-law distribution. The correlation modes are transferred into each other conveniently, although the consumer market system is highly complicated. The transformation of the correlation patterns of the regional consumer markets mainly revolves around three core correlation modes and each transformation needs to undergo 4 non-core modes.

Enhancing provision of written medicine information in Australia: pharmacist, general practitioner and consumer perceptions of the barriers and facilitators

PubMed Central

2014-01-01

Background Written medicine information can play an important role in educating consumers about their medicines. In Australia, standardised, comprehensive written information known as Consumer Medicine Information (CMI) is available for all prescription medicines. CMI is reportedly under-utilised by general practitioners (GPs) and community pharmacists in consultations, despite consumer desire for medicine information. This study aimed to determine consumers’, GPs’ and community pharmacists’ preferences for CMI provision and identify barriers and facilitators to its use. Method Structured questionnaires were developed and administered to a national sample of Australian consumers (phone survey), community pharmacists and GPs (postal surveys) surrounding utilisation of CMI. Descriptive and comparative analyses were conducted. Results Half of consumers surveyed wanted to receive CMI for their prescription medicine, with spoken information preferable to written medicine information for many consumers and healthcare professionals. GPs and pharmacists remained a preferred source of medicine information for consumers, although package inserts were appealing to many among all three cohorts. Overall pharmacists were the preferred provider of CMI primarily due to their medicine expertise, accessibility and perceived availability. GPs preferred CMI dissemination through both the GP and pharmacist. Some consumers preferred GPs as the provider of medicines information because of their knowledge of the patients’ medicines and/or medical history, regularity of seeing the patient and good relationship with the patient. Common barriers to CMI provision cited included: time constraints, CMI length and perceptions that patients are not interested in receiving CMI. Facilitators to enhance provision included: strategies to increase consumer awareness, longer consultation times and counseling appointments, and improvements to pharmacy software technology and workflow. Conclusion Medicine information is important to consumers, whether as spoken, written or a combination of both. A tailored approach is needed to ascertain individual patient preference for delivery and scope of medicine information desired so that appropriate information is provided. The barriers of time and perceived attitudes of healthcare practitioners present challenges which may be overcome through changes to workplace practices, adoption of identified facilitators, and education about the positive benefits of CMI as a tool to engage and empower patients. PMID:24754890

Sequential injection titration method using second-order signals: determination of acidity in plant oils and biodiesel samples.

PubMed

del Río, Vanessa; Larrechi, M Soledad; Callao, M Pilar

2010-06-15

A new concept of flow titration is proposed and demonstrated for the determination of total acidity in plant oils and biodiesel. We use sequential injection analysis (SIA) with a diode array spectrophotometric detector linked to chemometric tools such as multivariate curve resolution-alternating least squares (MCR-ALS). This system is based on the evolution of the basic specie of an acid-base indicator, alizarine, when it comes into contact with a sample that contains free fatty acids. The gradual pH change in the reactor coil due to diffusion and reaction phenomenona allows the sequential appearance of both species of the indicator in the detector coil, recording a data matrix for each sample. The SIA-MCR-ALS method helps to reduce the amounts of sample, the reagents and the time consumed. Each determination consumes 0.413ml of sample, 0.250ml of indicator and 3ml of carrier (ethanol) and generates 3.333ml of waste. The frequency of the analysis is high (12 samples h(-1) including all steps, i.e., cleaning, preparing and analysing). The utilized reagents are of common use in the laboratory and it is not necessary to use the reagents of perfect known concentration. The method was applied to determine acidity in plant oil and biodiesel samples. Results obtained by the proposed method compare well with those obtained by the official European Community method that is time consuming and uses large amounts of organic solvents.

Assessing Consumer Responses to PREPs: A Review of Tobacco Industry and Independent Research Methods

PubMed Central

Rees, Vaughan W.; Kreslake, Jennifer M.; Cummings, K. Michael; O'Connor, Richard J.; Hatsukami, Dorothy K.; Parascandola, Mark; Shields, Peter G.; Connolly, Gregory N.

2009-01-01

Objective Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing CR, and consider how these methods might be applied to evaluate PREPs and new products. Methods Internal industry research reviewed included published papers, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Results Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. Conclusions A model which conceptualizes consumer response as comprising the separate, but interacting domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model, and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of PREPs and new products, to counteract tobacco industry influence on consumers, and enhance the public health. PMID:19959675

[Profile of psychoactive substances consumption in workplace].

PubMed

Bœuf-Cazou, Olivia; Lapeyre-Mestre, Maryse; Niezborala, Michel; Montastruc, Jean-Louis

2011-01-01

The aim of this study was to identify profiles of psychoactive substances consumers among workers according to their professional characteristics. In 2006, 2213 workers participated in "Mode de Vie et Travail" (Drugs and Work) cross-sectional survey. Data were collected by a self-administered questionnaire concerning general and professional characteristics and the consumption of psychoactive substances (psychoactive drugs, tobacco, alcohol and cannabis) during the professional medical visit. We identified consumer profiles with a hierarchical ascendant classification as statistical method. We underlined five profiles associated with psychoactive substance consumption: (1) alcohol consumers in the workplace were sales engineers satisfied with their employment, (2) alcohol consumers after their work were not satisfied with their lives, (3) cannabis consumers were men professionally satisfied but suffering from job insecurity, (4) smokers were workers with professional responsibilities under time pressure, and finally (5) poly-consumers had strong professional constraints. This study guides occupational physicians on psychoactive substances consumption among a worker population. © 2011 Société Française de Pharmacologie et de Thérapeutique.

Creating IRT-Based Parallel Test Forms Using the Genetic Algorithm Method

ERIC Educational Resources Information Center

Sun, Koun-Tem; Chen, Yu-Jen; Tsai, Shu-Yen; Cheng, Chien-Fen

2008-01-01

In educational measurement, the construction of parallel test forms is often a combinatorial optimization problem that involves the time-consuming selection of items to construct tests having approximately the same test information functions (TIFs) and constraints. This article proposes a novel method, genetic algorithm (GA), to construct parallel…

Feature selection methods for object-based classification of sub-decimeter resolution digital aerial imagery

USDA-ARS?s Scientific Manuscript database

Due to the availability of numerous spectral, spatial, and contextual features, the determination of optimal features and class separabilities can be a time consuming process in object-based image analysis (OBIA). While several feature selection methods have been developed to assist OBIA, a robust c...

Accelerated Colorimetric Micro-assay for Screening Mold Inhibitors

Treesearch

Carol A. Clausen; Vina W. Yang

2014-01-01

Rapid quantitative laboratory test methods are needed to screen potential antifungal agents. Existing laboratory test methods are relatively time consuming, may require specialized test equipment and rely on subjective visual ratings. A quantitative, colorimetric micro-assay has been developed that uses XTT tetrazolium salt to metabolically assess mold spore...

Estimation of octanol/water partition coefficient and aqueous solubility of environmental chemicals using molecular fingerprints and machine learning methods

EPA Science Inventory

Octanol/water partition coefficient (logP) and aqueous solubility (logS) are two important parameters in pharmacology and toxicology studies, and experimental measurements are usually time-consuming and expensive. In the present research, novel methods are presented for the estim...

Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

PubMed

Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

2009-12-01

Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

Development of a real-time PCR for the detection of pathogenic Leptospira spp. in California sea lions

USDA-ARS?s Scientific Manuscript database

Rapid detection of pathogenic Leptospira spp. in marine mammals is challenging: microbiological culture can take 3-6 months and has low sensitivity, immunohistochemical staining of kidney to detect leptospires is invasive and time consuming, and serological methods, such as the microscopic agglutina...

Current applications of GPR in forest research

Treesearch

John Butnor; Kurt Johnsen; Lisa Samuelson; Michele Pruyn

2009-01-01

Forests, both naturally regenerated stands and plantations are complex, long-lived systems, which can be difficult to assess and monitor over time. This is especially true of belowground biomass and internal features of trees which are inaccessible except by destructive sampling. Traditional methods are expensive, destructive, time-consuming, usually yield a small...

Molecular Characterization of cyanobacterial blooms

EPA Science Inventory

Traditionally, the detection and identification of cyanobacteria implicated in harmful algal blooms has been conducted using microscopical techniques. Such conventional methods are time consuming and cumbersome, cannot discriminate between closely related taxa, and cannot discrim...

A rapid review of consumer health information needs and preferences.

PubMed

Ramsey, Imogen; Corsini, Nadia; Peters, Micah D J; Eckert, Marion

2017-09-01

This rapid review summarizes best available evidence on consumers' needs and preferences for information about healthcare, with a focus on the Australian context. Three questions are addressed: 1) Where do consumers find and what platform do they use to access information about healthcare? 2) How do consumers use the healthcare information that they find? 3) About which topics or subjects do consumers need healthcare information? A hierarchical approach was adopted with evidence first sought from reviews then high quality studies using Medline (via PubMed), CINAHL, Embase, the JBI Database of Systematic Reviews and Implementation Reports, the Campbell Collaboration Library of Systematic Reviews, EPPI-Centre, and Epistemonikos. Twenty-eight articles were included; four systematic reviews, three literature reviews, thirteen quantitative studies, six qualitative studies, and two mixed methods studies. Consumers seek health information at varying times along the healthcare journey and through various modes of delivery. Complacency with historical health information modes is no longer appropriate and flexibility is essential to suit growing consumer demands. Health information should be readily available in different formats and not exclusive to any single medium. Copyright © 2017. Published by Elsevier B.V.

Comparative cost-efficiency of the EVOTECH endoscope cleaner and reprocessor versus manual cleaning plus automated endoscope reprocessing in a real-world Canadian hospital endoscopy setting

PubMed Central

2011-01-01

Background Reprocessing of endoscopes generally requires labour-intensive manual cleaning followed by high-level disinfection in an automated endoscope reprocessor (AER). EVOTECH Endoscope Cleaner and Reprocessor (ECR) is approved for fully automated cleaning and disinfection whereas AERs require manual cleaning prior to the high-level disinfection procedure. The purpose of this economic evaluation was to determine the cost-efficiency of the ECR versus AER methods of endoscopy reprocessing in an actual practice setting. Methods A time and motion study was conducted at a Canadian hospital to collect data on the personnel resources and consumable supplies costs associated with the use of EVOTECH ECR versus manual cleaning followed by AER with Medivators DSD-201. Reprocessing of all endoscopes was observed and timed for both reprocessor types over three days. Laboratory staff members were interviewed regarding the consumption and cost of all disposable supplies and equipment. Exact Wilcoxon rank sum test was used for assessing differences in total cycle reprocessing time. Results Endoscope reprocessing was significantly shorter with the ECR than with manual cleaning followed by AER. The differences in median time were 12.46 minutes per colonoscope (p < 0.0001), 6.31 minutes per gastroscope (p < 0.0001), and 5.66 minutes per bronchoscope (p = 0.0040). Almost 2 hours of direct labour time was saved daily with the ECR. The total per cycle cost of consumables and labour for maintenance was slightly higher for EVOTECH ECR versus manual cleaning followed by AER ($8.91 versus $8.31, respectively). Including the cost of direct labour time consumed in reprocessing scopes, the per cycle and annual costs of using the EVOTECH ECR was less than the cost of manual cleaning followed by AER disinfection ($11.50 versus $11.88). Conclusions The EVOTECH ECR was more efficient and less costly to use for the reprocessing of endoscopes than manual cleaning followed by AER disinfection. Although the cost of consumable supplies required to reprocess endoscopes with EVOTECH ECR was slightly higher, the value of the labour time saved with EVOTECH ECR more than offset the additional consumables cost. The increased efficiency with EVOTECH ECR could lead to even further cost-savings by shifting endoscopy laboratory personnel responsibilities but further study is required. PMID:21967345

Consumer involvement in systematic reviews of comparative effectiveness research.

PubMed

Kreis, Julia; Puhan, Milo A; Schünemann, Holger J; Dickersin, Kay

2013-12-01

The Institute of Medicine recently recommended that comparative effectiveness research (CER) should involve input from consumers. While systematic reviews are a major component of CER, little is known about consumer involvement. To explore current approaches to involving consumers in US-based and key international organizations and groups conducting or commissioning systematic reviews ('organizations'). In-depth, semi-structured interviews with key informants and review of organizations' websites. Seventeen highly regarded US-based and international (Cochrane Collaboration, Campbell Collaboration) organizations. Organizations that usually involve consumers (seven of 17 in our sample) involve them at a programmatic level in the organization or in individual reviews through one-time consultation or on-going collaboration. For example, consumers may suggest topics, provide input on the key questions of the review, provide comments on draft protocols and reports, serve as co-authors or on an advisory group. Organizations involve different types of consumers (individual patients, consumer advocates, families and caregivers), recruiting them mainly through patient organizations and consumer networks. Some offer training in research methods, and one developed training for researchers on how to involve consumers. Little formal evaluation of the effects of consumer involvement is being carried out. Consumers are currently involved in systematic reviews in a variety of ways and for various reasons. Assessing which approaches are most effective in achieving different aims of consumer involvement is now required to inform future recommendations on consumer involvement in CER. © 2012 John Wiley & Sons Ltd.

Consumer involvement in systematic reviews of comparative effectiveness research

PubMed Central

Kreis, Julia; Puhan, Milo A.; Schünemann, Holger J.; Dickersin, Kay

2012-01-01

Abstract Background  The Institute of Medicine recently recommended that comparative effectiveness research (CER) should involve input from consumers. While systematic reviews are a major component of CER, little is known about consumer involvement. Objective  To explore current approaches to involving consumers in US‐based and key international organizations and groups conducting or commissioning systematic reviews (‘organizations’). Design  In‐depth, semi‐structured interviews with key informants and review of organizations’ websites. Setting and participants  Seventeen highly regarded US‐based and international (Cochrane Collaboration, Campbell Collaboration) organizations. Results  Organizations that usually involve consumers (seven of 17 in our sample) involve them at a programmatic level in the organization or in individual reviews through one‐time consultation or on‐going collaboration. For example, consumers may suggest topics, provide input on the key questions of the review, provide comments on draft protocols and reports, serve as co‐authors or on an advisory group. Organizations involve different types of consumers (individual patients, consumer advocates, families and caregivers), recruiting them mainly through patient organizations and consumer networks. Some offer training in research methods, and one developed training for researchers on how to involve consumers. Little formal evaluation of the effects of consumer involvement is being carried out. Conclusions  Consumers are currently involved in systematic reviews in a variety of ways and for various reasons. Assessing which approaches are most effective in achieving different aims of consumer involvement is now required to inform future recommendations on consumer involvement in CER. PMID:22390732

Analysis of consumer behavior in decision making of purchasing ornamental freshwater fish (case of study at ornamental freshwater fish market at Peta Street, Bandung)

NASA Astrophysics Data System (ADS)

Gumilar, I.; Rizal, A.; Sriati; Setiawan Putra, R.

2018-04-01

This research aim was to analyzed process of decision making of purchasing ornamental freshwater fish at Peta Street, Bandung City and Analyzed what factors are driving consumers to buy freshwater fish Peta Street. The method used in this research is case study with rating scale and rank spearman analysis. The sampling technique is the accidental random sampling method consist of 30 respondents. The consumer’s decision making process consist of five stages, namely the recognition of needs, information searching, alternative evaluation, process of purchasing, and the evaluation of results. The results showed that at the stage of recognition of needs the motivation of purchasing freshwater fish because respondents are very fond of ornamental freshwater fish, at the stage of information search, the information sources are from the print media and friends or neighborhood. At the stage of alternative evaluation, the reason consumers buy ornamental freshwater fish because the quality of good products. The stage of purchasing decision process consumers bought 1-5 fish with frequency of purchase 1 time per month. The evaluation of results of post-purchasing consumers feel very satisfied with the fish products and the price is very affordable. To observe the factors that influence purchasing motivation of consumers, spearman rank test is the method. The results showed that the quality and price of the product are the factors that most influence the purchase decision of ornamental freshwater fish with the range of student-t value 3,968 and 2,107.

Multiclass methods for the analysis of antibiotic residues in milk by liquid chromatography coupled to mass spectrometry: A review.

PubMed

Rossi, Rosanna; Saluti, Giorgio; Moretti, Simone; Diamanti, Irene; Giusepponi, Danilo; Galarini, Roberta

2018-02-01

Milk is an important and beneficial food from a nutritional point of view, being an indispensable source of high quality proteins. Furthermore, it is a raw material for many dairy products, such as yoghurt, cheese, cream etc. Before reaching consumers, milk goes through production, processing and circulation. Each step involves potentially unsafe factors, such as chemical contamination that can affect milk quality. Antibiotics are widely used in veterinary medicine for dry cow therapy and mastitis treatment in lactating cows, which can cause the presence of antimicrobial residues in milk. In order to ensure consumers' safety, milk is analyzed to make sure that the fixed Maximum Residue Limits (MRLs) for antibiotics are not exceeded. Multiclass methods can monitor more drug classes through a single analysis, so they are faster, less time-consuming and cheaper than traditional methods (single-class); this aspect is particularly important for milk, which is a highly perishable food. Nevertheless, multiclass methods for veterinary drug residues in foodstuffs are real analytical challenges. This article reviews the major multiclass methods published for the determination of antibiotic residues in milk by liquid chromatography coupled to mass spectrometry, with a special focus on sample preparation approaches.

Consumer panel study on elderly people's wishes concerning services.

PubMed

Valkila, Noora; Litja, Heli; Aalto, Leena; Saari, Arto

2010-01-01

This study informs on the wishes and needs of elderly people themselves regarding services for the elderly. The data for the study were gathered using a consumer panel method. Elderly people desire assistance in heavy cleaning chores, in outdoor activities and in carrying out their personal business. Elderly people felt that there should be more recreational services available. Elderly people link aging with feelings of insecurity and loneliness. Becoming a service user for the first time is felt to be a very difficult step to take, and so this decision is postponed as long as possible. The elderly people desire a service for assessing their individual service needs in an organized, expert and objective fashion. The study indicates that elderly people value the human contact gained through service provision. The consumer panel method for collecting data was successful. Copyright © 2009 Elsevier Ireland Ltd. All rights reserved.

Transactive control of fast-acting demand response based on thermostatic loads in real-time retail electricity markets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Behboodi, Sahand; Chassin, David P.; Djilali, Ned

Coordinated operation of distributed thermostatic loads such as heat pumps and air conditioners can reduce energy costs and prevents grid congestion, while maintaining room temperatures in the comfort range set by consumers. This paper furthers efforts towards enabling thermostatically controlled loads (TCLs) to participate in real-time retail electricity markets under a transactive control paradigm. An agent-based approach is used to develop an effective and low complexity demand response control scheme for TCLs. The proposed scheme adjusts aggregated thermostatic loads according to real-time grid conditions under both heating and cooling modes. Here, a case study is presented showing the method reducesmore » consumer electricity costs by over 10% compared to uncoordinated operation.« less

Transactive control of fast-acting demand response based on thermostatic loads in real-time retail electricity markets

DOE PAGES

Behboodi, Sahand; Chassin, David P.; Djilali, Ned; ...

2017-07-29

Coordinated operation of distributed thermostatic loads such as heat pumps and air conditioners can reduce energy costs and prevents grid congestion, while maintaining room temperatures in the comfort range set by consumers. This paper furthers efforts towards enabling thermostatically controlled loads (TCLs) to participate in real-time retail electricity markets under a transactive control paradigm. An agent-based approach is used to develop an effective and low complexity demand response control scheme for TCLs. The proposed scheme adjusts aggregated thermostatic loads according to real-time grid conditions under both heating and cooling modes. Here, a case study is presented showing the method reducesmore » consumer electricity costs by over 10% compared to uncoordinated operation.« less

Drop short control of electrode gap

DOEpatents

Fisher, Robert W.; Maroone, James P.; Tipping, Donald W.; Zanner, Frank J.

1986-01-01

During vacuum consumable arc remelting the electrode gap between a consumable electrode and a pool of molten metal is difficult to control. The present invention monitors drop shorts by detecting a decrease in the voltage between the consumable electrode and molten pool. The drop shorts and their associated voltage reductions occur as repetitive pulses which are closely correlated to the electrode gap. Thus, the method and apparatus of the present invention controls electrode gap based upon drop shorts detected from the monitored anode-cathode voltage. The number of drop shorts are accumulated, and each time the number of drop shorts reach a predetermined number, the average period between drop shorts is calculated from this predetermined number and the time in which this number is accumulated. This average drop short period is used in a drop short period electrode gap model which determines the actual electrode gap from the drop short. The actual electrode gap is then compared with a desired electrode gap which is selected to produce optimum operating conditions and the velocity of the consumable error is varied based upon the gap error. The consumable electrode is driven according to any prior art system at this velocity. In the preferred embodiment, a microprocessor system is utilized to perform the necessary calculations and further to monitor the duration of each drop short. If any drop short exceeds a preset duration period, the consumable electrode is rapidly retracted a predetermined distance to prevent bonding of the consumable electrode to the molten remelt.

Objective Community Integration of Mental Health Consumers Living in Supported Housing and of Others in the Community

PubMed Central

Yanos, Philip T.; Stefancic, Ana; Tsemberis, Sam

2015-01-01

Objective Housing programs for people with severe mental illnesses aim to maximize community integration. However, little is known about how the community integration of mental health consumers living in supported housing compares with that of other community residents in the socially disadvantaged communities where supported housing is often located. The purpose of this study was to examine predictors of objective community integration of mental health consumers living in supported housing and of other persons living in the same communities. Methods Participants were 124 adults (60 mental health consumers and 64 other community residents) residing in designated zip codes in the Bronx, New York. Participants were administered measures of psychiatric symptoms, substance use, physical community integration (participation in local activities), social integration (interactions with community members), and citizenship (political activism or volunteering). Results Mental health consumers living in supported independent housing had significantly lower scores on indicators of objective community integration than other community members. However, differences were relatively small. Among mental health consumers, African-American race, education, and length of time in current residence were associated with better community integration. Conclusions Findings suggest that mental health consumers living in supported housing may not achieve levels of objective community integration that are comparable with other community members; however, psychiatric factors did not account for this difference. Length of time in neighborhoods appears to be an important factor in facilitating social integration. PMID:22549530

Public Online Information About Tinnitus: A Cross-Sectional Study of YouTube Videos

PubMed Central

Basch, Corey H.; Yin, Jingjing; Kollia, Betty; Adedokun, Adeyemi; Trusty, Stephanie; Yeboah, Felicia; Fung, Isaac Chun-Hai

2018-01-01

Purpose: To examine the information about tinnitus contained in different video sources on YouTube. Materials and Methods: The 100 most widely viewed tinnitus videos were manually coded. Firstly, we identified the sources of upload: consumer, professional, television-based clip, and internet-based clip. Secondly, the videos were analyzed to ascertain what pertinent information they contained from a current National Institute on Deafness and Other Communication Disorders fact sheet. Results: Of the videos, 42 were consumer-generated, 33 from media, and 25 from professionals. Collectively, the 100 videos were viewed almost 9 million times. The odds of mentioning “objective tinnitus” in professional videos were 9.58 times those from media sources [odds ratio (OR) = 9.58; 95% confidence interval (CI): 1.94, 47.42; P = 0.01], whereas these odds in consumer videos were 51% of media-generated videos (OR = 0.51; 95% CI: 0.20, 1.29; P = 0.16). The odds that the purpose of a video was to sell a product or service were nearly the same for both consumer and professional videos. Consumer videos were found to be 4.33 times as likely to carry a theme about an individual’s own experience with tinnitus (OR = 4.33; 95% CI: 1.62, 11.63; P = 0.004) as media videos. Conclusions: Of the top 100 viewed videos on tinnitus, most were uploaded by consumers, sharing individuals’ experiences. Actions are needed to make scientific medical information more prominently available and accessible on YouTube and other social media. PMID:29457600

Microbiological and biochemical spoilage of smoke-dried fishes sold in West African open markets.

PubMed

Ikutegbe, Victoria; Sikoki, Francis

2014-10-15

Proximate composition and microbiological characteristics of pre-dried Chrysichthys nigrodigitatus and Pseudotolithus typus were studied over a period of 4weeks to determine the health risks associated with delayed consumption. All analyses were conducted using standard microbiological and chemical methods. Results showed a general decline in microbiological safety and nutritive characteristics of both fish species over time, with an observed increase in microbial loads over time. Aspergillus flavus was also present on both species which makes consumption of the fishes hazardous to the health of consumers due to its ability to produce carcinogenic aflatoxins. In order to minimise the health risks to consumers, it is recommended that smoke-dried fishes be consumed with minimal delay and cooked properly before consumption. The findings of this study will prove important in the development of more stringent regulations regarding food safety in Nigeria. Copyright © 2014 Elsevier Ltd. All rights reserved.

High-throughput Screening of Recalcitrance Variations in Lignocellulosic Biomass: Total Lignin, Lignin Monomers, and Enzymatic Sugar Release

PubMed Central

Decker, Stephen R.; Sykes, Robert W.; Turner, Geoffrey B.; Lupoi, Jason S.; Doepkke, Crissa; Tucker, Melvin P.; Schuster, Logan A.; Mazza, Kimberly; Himmel, Michael E.; Davis, Mark F.; Gjersing, Erica

2015-01-01

The conversion of lignocellulosic biomass to fuels, chemicals, and other commodities has been explored as one possible pathway toward reductions in the use of non-renewable energy sources. In order to identify which plants, out of a diverse pool, have the desired chemical traits for downstream applications, attributes, such as cellulose and lignin content, or monomeric sugar release following an enzymatic saccharification, must be compared. The experimental and data analysis protocols of the standard methods of analysis can be time-consuming, thereby limiting the number of samples that can be measured. High-throughput (HTP) methods alleviate the shortcomings of the standard methods, and permit the rapid screening of available samples to isolate those possessing the desired traits. This study illustrates the HTP sugar release and pyrolysis-molecular beam mass spectrometry pipelines employed at the National Renewable Energy Lab. These pipelines have enabled the efficient assessment of thousands of plants while decreasing experimental time and costs through reductions in labor and consumables. PMID:26437006

High-Throughput Screening of Recalcitrance Variations in Lignocellulosic Biomass: Total Lignin, Lignin Monomers, and Enzymatic Sugar Release

DOE Office of Scientific and Technical Information (OSTI.GOV)

Decker, Stephen R.; Sykes, Robert W.; Turner, Geoffrey B.

The conversion of lignocellulosic biomass to fuels, chemicals, and other commodities has been explored as one possible pathway toward reductions in the use of non-renewable energy sources. In order to identify which plants, out of a diverse pool, have the desired chemical traits for downstream applications, attributes, such as cellulose and lignin content, or monomeric sugar release following an enzymatic saccharification, must be compared. The experimental and data analysis protocols of the standard methods of analysis can be time-consuming, thereby limiting the number of samples that can be measured. High-throughput (HTP) methods alleviate the shortcomings of the standard methods, andmore » permit the rapid screening of available samples to isolate those possessing the desired traits. This study illustrates the HTP sugar release and pyrolysis-molecular beam mass spectrometry pipelines employed at the National Renewable Energy Lab. These pipelines have enabled the efficient assessment of thousands of plants while decreasing experimental time and costs through reductions in labor and consumables.« less

PLS-LS-SVM based modeling of ATR-IR as a robust method in detection and qualification of alprazolam

NASA Astrophysics Data System (ADS)

Parhizkar, Elahehnaz; Ghazali, Mohammad; Ahmadi, Fatemeh; Sakhteman, Amirhossein

2017-02-01

According to the United States pharmacopeia (USP), Gold standard technique for Alprazolam determination in dosage forms is HPLC, an expensive and time-consuming method that is not easy to approach. In this study chemometrics assisted ATR-IR was introduced as an alternative method that produce similar results in fewer time and energy consumed manner. Fifty-eight samples containing different concentrations of commercial alprazolam were evaluated by HPLC and ATR-IR method. A preprocessing approach was applied to convert raw data obtained from ATR-IR spectra to normal matrix. Finally, a relationship between alprazolam concentrations achieved by HPLC and ATR-IR data was established using PLS-LS-SVM (partial least squares least squares support vector machines). Consequently, validity of the method was verified to yield a model with low error values (root mean square error of cross validation equal to 0.98). The model was able to predict about 99% of the samples according to R2 of prediction set. Response permutation test was also applied to affirm that the model was not assessed by chance correlations. At conclusion, ATR-IR can be a reliable method in manufacturing process in detection and qualification of alprazolam content.

Automatic segmentation of coronary arteries from computed tomography angiography data cloud using optimal thresholding

NASA Astrophysics Data System (ADS)

Ansari, Muhammad Ahsan; Zai, Sammer; Moon, Young Shik

2017-01-01

Manual analysis of the bulk data generated by computed tomography angiography (CTA) is time consuming, and interpretation of such data requires previous knowledge and expertise of the radiologist. Therefore, an automatic method that can isolate the coronary arteries from a given CTA dataset is required. We present an automatic yet effective segmentation method to delineate the coronary arteries from a three-dimensional CTA data cloud. Instead of a region growing process, which is usually time consuming and prone to leakages, the method is based on the optimal thresholding, which is applied globally on the Hessian-based vesselness measure in a localized way (slice by slice) to track the coronaries carefully to their distal ends. Moreover, to make the process automatic, we detect the aorta using the Hough transform technique. The proposed segmentation method is independent of the starting point to initiate its process and is fast in the sense that coronary arteries are obtained without any preprocessing or postprocessing steps. We used 12 real clinical datasets to show the efficiency and accuracy of the presented method. Experimental results reveal that the proposed method achieves 95% average accuracy.

Medical resource utilization for administration of trastuzumab in a New Zealand oncology outpatient setting: a time and motion study

PubMed Central

North, Richard T; Harvey, Vernon J; Cox, Levonne C; Ryan, Stuart N

2015-01-01

Background In New Zealand, trastuzumab is standard therapy for human epidermal growth factor receptor-2 (HER2)-positive early and metastatic breast cancer. Given the requirement for ongoing adjuvant or maintenance treatment and intravenous (IV) delivery, such a regimen consumes considerable health care resources. The development of a subcutaneous (SC) trastuzumab formulation with a short administration time offers the potential to reduce hospital expenditure. The aim of this study was to determine medical resource utilization associated with administration of trastuzumab SC injection via handheld syringe vs trastuzumab IV infusion in patients with HER2-positive breast cancer in New Zealand. Methods This noninterventional, descriptive study was conducted at the outpatient oncology centers at Auckland City and Tauranga Hospitals. Trained observers recorded times associated with health care professional (HCP) tasks and consumables use associated with preparation and administration of trastuzumab IV or SC in women with early or metastatic breast cancer. The cost for each formulation was calculated as the mean cost of HCP time (based on Pharmaceutical Management Agency hourly rates) plus the mean cost of consumables used. Results Use of trastuzumab SC vs IV reduced mean chair time by 36.95 minutes and total nurse time by 6.12 minutes; there was a 20.45-minute reduction in pharmacist time when the SC formulation was used. After adding consumable costs, the overall estimated saving with trastuzumab SC vs IV was $76.94 (New Zealand dollars) per patient per cycle. Conclusions Compared with trastuzumab IV infusion, administration of trastuzumab via SC injection reduced time spent in the clinic and decreased HCP resources and consumables needed to administer treatment. These reductions could contribute to a decrease in health care costs and an improvement in the efficiency of HER2-positive breast cancer treatment delivery. PMID:26251623

A Kind of Optimization Method of Loading Documents in OpenOffice.org

NASA Astrophysics Data System (ADS)

Lan, Yuqing; Li, Li; Zhou, Wenbin

As a giant in open source community, OpenOffice.org has become the most popular office suite within Linux community. But OpenOffice.org is relatively slow while loading documents. Research shows that the most time consuming part is importing one page of whole document. If there are many pages in a document, the accumulation of time consumed can be astonishing. Therefore, this paper proposes a solution, which has improved the speed of loading documents through asynchronous importing mechanism: a document is not imported as a whole, but only part of the document is imported at first for display, then mechanism in the background is started to asynchronously import the remaining parts, and insert it into the drawing queue of OpenOffice.org for display. In this way, the problem can be solved and users don't have to wait for a long time. Application start-up time testing tool has been used to test the time consumed in loading different pages of documents before and after optimization of OpenOffice.org, then, we adopt the regression theory to analyse the correlation between the page number of documents and the loading time. In addition, visual modeling of the experimental data are acquired with the aid of matlab. An obvious increase in loading speed can be seen after a comparison of the time consumed to load a document before and after the solution is adopted. And then, using Microsoft Office compared with the optimized OpenOffice.org, their loading speeds are almost same. The results of the experiments show the effectiveness of this solution.

Robust Dynamic Multi-objective Vehicle Routing Optimization Method.

PubMed

Guo, Yi-Nan; Cheng, Jian; Luo, Sha; Gong, Dun-Wei

2017-03-21

For dynamic multi-objective vehicle routing problems, the waiting time of vehicle, the number of serving vehicles, the total distance of routes were normally considered as the optimization objectives. Except for above objectives, fuel consumption that leads to the environmental pollution and energy consumption was focused on in this paper. Considering the vehicles' load and the driving distance, corresponding carbon emission model was built and set as an optimization objective. Dynamic multi-objective vehicle routing problems with hard time windows and randomly appeared dynamic customers, subsequently, were modeled. In existing planning methods, when the new service demand came up, global vehicle routing optimization method was triggered to find the optimal routes for non-served customers, which was time-consuming. Therefore, robust dynamic multi-objective vehicle routing method with two-phase is proposed. Three highlights of the novel method are: (i) After finding optimal robust virtual routes for all customers by adopting multi-objective particle swarm optimization in the first phase, static vehicle routes for static customers are formed by removing all dynamic customers from robust virtual routes in next phase. (ii)The dynamically appeared customers append to be served according to their service time and the vehicles' statues. Global vehicle routing optimization is triggered only when no suitable locations can be found for dynamic customers. (iii)A metric measuring the algorithms' robustness is given. The statistical results indicated that the routes obtained by the proposed method have better stability and robustness, but may be sub-optimum. Moreover, time-consuming global vehicle routing optimization is avoided as dynamic customers appear.

A comparison of three feature selection methods for object-based classification of sub-decimeter resolution UltraCam-L imagery

USDA-ARS?s Scientific Manuscript database

The availability of numerous spectral, spatial, and contextual features with object-based image analysis (OBIA) renders the selection of optimal features a time consuming and subjective process. While several feature election methods have been used in conjunction with OBIA, a robust comparison of th...

Validation of the Portuguese self-administered computerised 24-hour dietary recall among second-, third- and fourth-grade children

USDA-ARS?s Scientific Manuscript database

Current methods for assessing children's dietary intake, such as interviewer-administered 24-h dietary recall (24-h DR), are time consuming and resource intensive. Self-administered instruments offer a low-cost diet assessment method for use with children. The present study assessed the validity of ...

Development of SCAR markers and UP-PCR cross-hybridization method for specific detection of four major subgroups of Rhizoctonia from infected turfgrasses

USDA-ARS?s Scientific Manuscript database

Several species and hyphal anastomosis groups (AG) of Rhizoctonia solani (sensu lato) cause brown patch diseases of turfgrasses. Conventional methods of identification of Rhizoctonia pathogens are time consuming and often inaccurate. A rapid identification assay for Waitea circinata (anamorph: Rhizo...

Colorimetric micro-assay for accelerated screening of mould inhibitors

Treesearch

Carol A. Clausen; Vina W. Yang

2013-01-01

Since current standard laboratory methods are time-consuming macro-assays that rely on subjective visual ratings of mould growth, rapid and quantitative laboratory methods are needed to screen potential mould inhibitors for use in and on cellulose-based products. A colorimetric micro-assay has been developed that uses XTT tetrazolium salt to enzymatically assess...

A rapid spectrophotometric method to determine B-carotene content in Cucumis melo germplasm

USDA-ARS?s Scientific Manuscript database

The compound B -carotene is the predominant carotenoid in cantaloupe. Because of its antioxidant properties and health benefits, B-carotene content in fruits and vegetables is of interest to the food industry. Current methods to assay B-carotene content in fruit are time consuming, expensive and u...

Real-time volume rendering of 4D image using 3D texture mapping

NASA Astrophysics Data System (ADS)

Hwang, Jinwoo; Kim, June-Sic; Kim, Jae Seok; Kim, In Young; Kim, Sun Il

2001-05-01

Four dimensional image is 3D volume data that varies with time. It is used to express deforming or moving object in virtual surgery of 4D ultrasound. It is difficult to render 4D image by conventional ray-casting or shear-warp factorization methods because of their time-consuming rendering time or pre-processing stage whenever the volume data are changed. Even 3D texture mapping is used, repeated volume loading is also time-consuming in 4D image rendering. In this study, we propose a method to reduce data loading time using coherence between currently loaded volume and previously loaded volume in order to achieve real time rendering based on 3D texture mapping. Volume data are divided into small bricks and each brick being loaded is tested for similarity to one which was already loaded in memory. If the brick passed the test, it is defined as 3D texture by OpenGL functions. Later, the texture slices of the brick are mapped into polygons and blended by OpenGL blending functions. All bricks undergo this test. Continuously deforming fifty volumes are rendered in interactive time with SGI ONYX. Real-time volume rendering based on 3D texture mapping is currently available on PC.

Farmers as Consumers of Agricultural Education Services: Willingness to Pay and Spend Time

ERIC Educational Resources Information Center

Charatsari, Chrysanthi; Papadaki-Klavdianou, Afroditi; Michailidis, Anastasios

2011-01-01

This study assessed farmers' willingness to pay for and spend time attending an Agricultural Educational Program (AEP). Primary data on the demographic and socio-economic variables of farmers were collected from 355 farmers selected randomly from Northern Greece. Descriptive statistics and multivariate analysis methods were used in order to meet…

Improving delivery routes using combined heuristic and optimization in a consumer goods distribution company

NASA Astrophysics Data System (ADS)

Wibisono, E.; Santoso, A.; Sunaryo, M. A.

2017-11-01

XYZ is a distributor of various consumer goods products. The company plans its delivery routes daily and in order to obtain route construction in a short amount of time, it simplifies the process by assigning drivers based on geographic regions. This approach results in inefficient use of vehicles leading to imbalance workloads. In this paper, we propose a combined method involving heuristic and optimization to obtain better solutions in acceptable computation time. The heuristic is based on a time-oriented, nearest neighbor (TONN) to form clusters if the number of locations is higher than a certain value. The optimization part uses a mathematical modeling formulation based on vehicle routing problem that considers heterogeneous vehicles, time windows, and fixed costs (HVRPTWF) and is used to solve routing problem in clusters. A case study using data from one month of the company’s operations is analyzed, and data from one day of operations are detailed in this paper. The analysis shows that the proposed method results in 24% cost savings on that month, but it can be as high as 54% in a day.

Fatigue Life Assessment of 65Si7 Leaf Springs: A Comparative Study

PubMed Central

Arora, Vinkel Kumar; Bhushan, Gian; Aggarwal, M. L.

2014-01-01

The experimental fatigue life prediction of leaf springs is a time consuming process. The engineers working in the field of leaf springs always face a challenge to formulate alternate methods of fatigue life assessment. The work presented in this paper provides alternate methods for fatigue life assessment of leaf springs. A 65Si7 light commercial vehicle leaf spring is chosen for this study. The experimental fatigue life and load rate are determined on a full scale leaf spring testing machine. Four alternate methods of fatigue life assessment have been depicted. Firstly by SAE spring design manual approach the fatigue test stroke is established and by the intersection of maximum and initial stress the fatigue life is predicted. The second method constitutes a graphical method based on modified Goodman's criteria. In the third method codes are written in FORTRAN for fatigue life assessment based on analytical technique. The fourth method consists of computer aided engineering tools. The CAD model of the leaf spring has been prepared in solid works and analyzed using ANSYS. Using CAE tools, ideal type of contact and meshing elements have been proposed. The method which provides fatigue life closer to experimental value and consumes less time is suggested. PMID:27379327

Developing Organs On-a-Chip: Chemical Safety Research Collaborators Provide Research Review

EPA Pesticide Factsheets

Risk assessors must understand how chemicals impact human systems, including complex tissues and organs. Unfortunately, there are huge data gaps in this area, and current testing methods are costly and time-consuming.

Comparison of Medical and Consumer Wireless EEG Systems for Use in Clinical Trials.

PubMed

Ratti, Elena; Waninger, Shani; Berka, Chris; Ruffini, Giulio; Verma, Ajay

2017-01-01

Objectives: To compare quantitative EEG signal and test-retest reliability of medical grade and consumer EEG systems. Methods: Resting state EEG was acquired by two medical grade (B-Alert, Enobio) and two consumer (Muse, Mindwave) EEG systems in five healthy subjects during two study visits. EEG patterns, power spectral densities (PSDs) and test/retest reliability in eyes closed and eyes open conditions were compared across the four systems, focusing on Fp1, the only common electrode. Fp1 PSDs were obtained using Welch's modified periodogram method and averaged for the five subjects for each visit. The test/retest results were calculated as a ratio of Visit 1/Visit 2 Fp1 channel PSD at each 1 s epoch. Results: B-Alert, Enobio, and Mindwave Fp1 power spectra were similar. Muse showed a broadband increase in power spectra and the highest relative variation across test-retest acquisitions. Consumer systems were more prone to artifact due to eye blinks and muscle movement in the frontal region. Conclusions: EEG data can be successfully collected from all four systems tested. Although there was slightly more time required for application, medical systems offer clear advantages in data quality, reliability, and depth of analysis over the consumer systems. Significance: This evaluation provides evidence for informed selection of EEG systemsappropriate for clinical trials.

Risk assessment of consuming agricultural products irrigated with reclaimed wastewater: An exposure model

NASA Astrophysics Data System (ADS)

van Ginneken, Meike; Oron, Gideon

2000-09-01

This study assesses health risks to consumers due to the use of agricultural products irrigated with reclaimed wastewater. The analysis is based on a definition of an exposure model which takes into account several parameters: (1) the quality of the applied wastewater, (2) the irrigation method, (3) the elapsed times between irrigation, harvest, and product consumption, and (4) the consumers' habits. The exposure model is used for numerical simulation of human consumers' risks using the Monte Carlo simulation method. The results of the numerical simulation show large deviations, probably caused by uncertainty (impreciseness in quality of input data) and variability due to diversity among populations. There is a 10-orders of magnitude difference in the risk of infection between the different exposure scenarios with the same water quality. This variation indicates the need for setting risk-based criteria for wastewater reclamation rather than single water quality guidelines. Extra data are required to decrease uncertainty in the risk assessment. Future research needs to include definition of acceptable risk criteria, more accurate dose-response modeling, information regarding pathogen survival in treated wastewater, additional data related to the passage of pathogens into and in the plants during irrigation, and information regarding the behavior patterns of the community of human consumers.

Gene trap and gene inversion methods for conditional gene inactivation in the mouse

PubMed Central

Xin, Hong-Bo; Deng, Ke-Yu; Shui, Bo; Qu, Shimian; Sun, Qi; Lee, Jane; Greene, Kai Su; Wilson, Jason; Yu, Ying; Feldman, Morris; Kotlikoff, Michael I.

2005-01-01

Conditional inactivation of individual genes in mice using site-specific recombinases is an extremely powerful method for determining the complex roles of mammalian genes in developmental and tissue-specific contexts, a major goal of post-genomic research. However, the process of generating mice with recombinase recognition sequences placed at specific locations within a gene, while maintaining a functional allele, is time consuming, expensive and technically challenging. We describe a system that combines gene trap and site-specific DNA inversion to generate mouse embryonic stem (ES) cell clones for the rapid production of conditional knockout mice, and the use of this system in an initial gene trap screen. Gene trapping should allow the selection of thousands of ES cell clones with defined insertions that can be used to generate conditional knockout mice, thereby providing extensive parallelism that eliminates the time-consuming steps of targeting vector construction and homologous recombination for each gene. PMID:15659575

Energy Drink Consumption Practices of Young People in Bahrain

PubMed Central

Nassaif, Maryam M.; Alobed, Ghufran J. J.; Alaam, Noor A. A.; Alderrazi, Abdulla N.; Awdhalla, Muyssar S.; Vaithinathan, Asokan G.

2015-01-01

Background: Energy drink (ED) consumption is becoming increasingly popular among young Bahrainis, who may be unaware of the health risks associated with ED consumption. To date, there have been few publications on the consumption of ED in Bahrain, particularly among adolescents. This study seeks to fill a gap in the literature on energy drink consumption practices of Bahraini adolescents. Methods: Data were collected using a previously established European Food Safety Authority questionnaire. Cross-sectional analyses were conducted on a convenience sample of 262 Bahraini students aged 10 to 18 years. Results: Most participants consumed energy drinks 2 to 3 times per week and consumed two or more cans at a time. Eighty percent of partcipants preferred energy drinks with sugar. Participants in the older age group and higher educational level consumed more ED. The majority (57%) consumed ED at home with friends as part of socialization. Notably, 60% of the parents of the respondents have not consumed energy drinks. Prominent reasons for consumption of energy drinks included: taste (40%), energy (30%), stay awake (13%), augment concentration (4%), and enhance sports performance (6%). Conclusion: Energy drink consumption is a popular socialization activity among adolescents of Bahrain. The potential health risks necessitates the need for novel health promotion strategies and advocacy efforts for healthy hydration practices. PMID:29138721

Response of consumer and research grade indoor air quality monitors to residential sources of fine particles.

PubMed

Singer, B C; Delp, W W

2018-04-23

The ability to inexpensively monitor PM 2.5 to identify sources and enable controls would advance residential indoor air quality (IAQ) management. Consumer IAQ monitors incorporating low-cost optical particle sensors and connections with smart home platforms could provide this service if they reliably detect PM 2.5 in homes. In this study, particles from typical residential sources were generated in a 120 m 3 laboratory and time-concentration profiles were measured with 7 consumer monitors (2-3 units each), 2 research monitors (Thermo pDR-1500, MetOne BT-645), a Grimm Mini Wide-Range Aerosol Spectrometer (GRM), and a Tapered Element Oscillating Microbalance with Filter Dynamic Measurement System (FDMS), a Federal Equivalent Method for PM 2.5 . Sources included recreational combustion (candles, cigarettes, incense), cooking activities, an unfiltered ultrasonic humidifier, and dust. FDMS measurements, filter samples, and known densities were used to adjust the GRM to obtain time-resolved mass concentrations. Data from the research monitors and 4 of the consumer monitors-AirBeam, AirVisual, Foobot, Purple Air-were time correlated and within a factor of 2 of the estimated mass concentrations for most sources. All 7 of the consumer and both research monitors substantially under-reported or missed events for which the emitted mass was comprised of particles smaller than 0.3 μm diameter. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

[Analysis of main risk factors causing foodborne diseases in food catering business].

PubMed

Fan, Yong-xiang; Liu, Xiu-mei; Bao, Yi-dan

2011-06-01

To study main risk factors that cause foodborne diseases in food catering business. Data from references and investigations conducted in food catering units were used to establish models which based on @Risk 4.5 with Monte Carlo method referring to food handling practice model (FHPM) to make risk assessment on factors of food contamination in food catering units. The Beta-Poisson models on dose-response relationship to Salmonella (developed by WHO/FAO and United States Department of Agriculture) and Vibrio parahaemolyticus (developed by US FDA) were used in this article to analyze the dose-response relationship of pathogens. The average probability of food poisoning by consuming Salmonella contaminated cooked meat under refrigeration was 1.96 × 10(-4) which was 1/2800 of the food under non-refrigeration (the average probability of food poisoning was 0.35 at room temperature 25°C). The average probability by consuming 6 hours stored meat under room temperature was 0.11 which was 16 times of 2 hours storage (6.79 × 10(-3)). The average probability by consuming contaminated meat without fully cooking was 1.71 × 10(-4) which was 100 times of consuming fully cooked meat (1.88 × 10(-6)). The probability growth of food poisoning by consuming Vibrio parahaemolyticus contaminated fresh seafood was proportional with contamination level and prevalence. The primary contamination level, storage temperature and time, cooking process and cross contamination are important factors of catering food safety.

An automated repair method of water pipe infrastructure using carbon fiber bundles

NASA Astrophysics Data System (ADS)

Wisotzkey, Sean; Carr, Heath; Fyfe, Ed

2011-04-01

The United States water pipe infrastructure is made up of over 2 million miles of pipe. Due to age and deterioration, a large portion of this pipe is in need of repair to prevent catastrophic failures. Current repair methods generally involve intrusive techniques that can be time consuming and costly, but also can cause major societal impacts. A new automated repair method incorporating innovative carbon fiber technology is in development. This automated method would eliminate the need for trenching and would vastly cut time and labor costs, providing a much more economical pipe repair solution.

Behavioral Targeting—Consumer Tracking

NASA Astrophysics Data System (ADS)

Srimani, P. K.; Srinivas, A.

2011-12-01

Behavioral targeting is an online marketing method that collects data on the browsing activities of consumers, in order to `target' more relevant online advertising. Behavioral targeting enables marketers to reach in-market consumers and increases the value of publisher inventory. At the heart of behavioral targeting is a learning-based investigation of consumer behaviors. It helps marketers understand consumers' purchase patterns over time, mapping out a customer's activities based not only on a single purchase but also on an annual or even lifetime basis. As marketers increasingly appreciate the importance of customer lifetime value, behavioral targeting can be a foundation for creating a continuous analytical study of consumer trends and patterns. But as behavioural-targeting systems become more sophisticated and invasive, it is vital that the companies behind them are open with users about what is going on, and give them control over their personal information. The aim of this paper is to explore the various tools and techniques of behavioral targeting and its benefits to online marketing. A multiple—case study approach was used for exploring the effectiveness and acceptance of online marketing in the area of the online marketing.

Enriching consumer health vocabulary through mining a social Q&A site: A similarity-based approach.

PubMed

He, Zhe; Chen, Zhiwei; Oh, Sanghee; Hou, Jinghui; Bian, Jiang

2017-05-01

The widely known vocabulary gap between health consumers and healthcare professionals hinders information seeking and health dialogue of consumers on end-user health applications. The Open Access and Collaborative Consumer Health Vocabulary (OAC CHV), which contains health-related terms used by lay consumers, has been created to bridge such a gap. Specifically, the OAC CHV facilitates consumers' health information retrieval by enabling consumer-facing health applications to translate between professional language and consumer friendly language. To keep up with the constantly evolving medical knowledge and language use, new terms need to be identified and added to the OAC CHV. User-generated content on social media, including social question and answer (social Q&A) sites, afford us an enormous opportunity in mining consumer health terms. Existing methods of identifying new consumer terms from text typically use ad-hoc lexical syntactic patterns and human review. Our study extends an existing method by extracting n-grams from a social Q&A textual corpus and representing them with a rich set of contextual and syntactic features. Using K-means clustering, our method, simiTerm, was able to identify terms that are both contextually and syntactically similar to the existing OAC CHV terms. We tested our method on social Q&A corpora on two disease domains: diabetes and cancer. Our method outperformed three baseline ranking methods. A post-hoc qualitative evaluation by human experts further validated that our method can effectively identify meaningful new consumer terms on social Q&A. Copyright © 2017 Elsevier Inc. All rights reserved.

Study on Influencing Factor Analysis and Application of Consumer Mobile Commerce Acceptance

NASA Astrophysics Data System (ADS)

Li, Gaoguang; Lv, Tingjie

Mobile commerce (MC) refers to e-commerce activities carried out using a mobile device such as a phone or PDA. With new technology, MC will be rapidly growing in the near future. At the present time, what factors making consumer accept MC and what MC applications are acceptable by consumers are two of hot issues both for MC providers and f or MC researchers. This study presents a proposed MC acceptance model that integrates perceived playfulness, perceived risk and cost into the TAM to study which factors affect consumer MC acceptance. The proposed model includes five variables, namely perceived risk, cost, perceived usefulness, perceived playfulness, perceived ease of use, perceived playfulness. Then, using analytic hierarchy process (AHP) to calculate weight of criteria involved in proposed model. Finally, the study utilizes fuzzy comprehensive evaluation method to evaluate MC applications accepted possibility, and then a MC application is empirically tested using data collected from a survey of MC consumers.

Consumer vinegar test for determining calcium disintegration.

PubMed

Mason, N A; Patel, J D; Dressman, J B; Shimp, L A

1992-09-01

A consumer test and standardized methods were compared for measuring the disintegration of calcium tablets, and the disintegration results were compared with results of dissolution testing to determine the ability of the consumer test of disintegration to predict bioavailability of calcium. Disintegration of 17 calcium supplement products, in tablet form, was studied in Simulated Gastric Fluid Test Solution, USP, without pepsin (GF), in distilled water, and in white distilled vinegar. For disintegration testing with GF and with distilled water, six tablets of each product were placed in an apparatus and immersed in the solution at 37 degrees C for 60 minutes. Six tablets of each product were tested in 200 mL of vinegar at room temperature for 30 minutes. Disintegration was determined by visual observation. Seven products were tested for dissolution in GF or water. Three samples of each product were tested at intervals over 120 minutes for calcium content. Results of testing with an ion-selective electrode were converted to milligrams and compared with the calcium content of the tablets (as claimed on the package label). The mean disintegration times of various calcium products in vinegar ranged from 1.8 to greater than 30 minutes. The mean time in distilled water and GF ranged from 1.6 to greater than 60 minutes and from 1.0 to greater than 60 minutes, respectively. Results were in agreement in 87% to 93% of cases between the consumer vinegar test and the standardized disintegration test methods, a significant correlation. No correlation was found between disintegration time and the extent of dissolution. The disintegration and dissolution of commercially available calcium tablets was highly variable.(ABSTRACT TRUNCATED AT 250 WORDS)

Cerebral perfusion imaging with bolus harmonic imaging (Honorable Mention Poster Award)

NASA Astrophysics Data System (ADS)

Kier, Christian; Toth, Daniel; Meyer-Wiethe, Karsten; Schindler, Angela; Cangur, Hakan; Seidel, Gunter; Aach, Til

2005-04-01

Fast visualisation of cerebral microcirculation supports diagnosis of acute stroke. However, the commonly used CT/MRI-based methods are time consuming, costly and not applicable to every patient. The bolus perfusion harmonic imaging (BHI) method is an ultrasound imaging technique which makes use of the fact, that ultrasound contrast agents unlike biological tissues resonate at harmonic frequencies. Exploiting this effect, the contrast between perfused and non-perfused areas can be improved. Thus, BHI overcomes the low signal-to-noise ratio of transcranial ultrasound and the high impedance of the skull. By analysing image sequences, visualising the qualitative characteristics of an US contrast agent bolus injection becomes possible. The analysis consists of calculating four perfusion-related parameters, Local Peak Intensity, Time To Peak, Area Under Curve, and Average Rising, from the time/intensity curve and providing them as colour-coded images. For calculating these parameters the fundamental assumption is that image intensity corresponds to contrast agent concentration which in turn shows the perfusion of the corresponding brain region. In a clinical study on patients suffering from acute ischemic stroke it is shown that some of the parameters correlate significantly to the infarction area. Thus, BHI becomes a less time-consuming and inexpensive bedside method for diagnosis of cerebral perfusion deficits.

Content-aware automatic cropping for consumer photos

NASA Astrophysics Data System (ADS)

Tang, Hao; Tretter, Daniel; Lin, Qian

2013-03-01

Consumer photos are typically authored once, but need to be retargeted for reuse in various situations. These include printing a photo on different size paper, changing the size and aspect ratio of an embedded photo to accommodate the dynamic content layout of web pages or documents, adapting a large photo for browsing on small displays such as mobile phone screens, and improving the aesthetic quality of a photo that was badly composed at the capture time. In this paper, we propose a novel, effective, and comprehensive content-aware automatic cropping (hereafter referred to as "autocrop") method for consumer photos to achieve the above purposes. Our autocrop method combines the state-of-the-art context-aware saliency detection algorithm, which aims to infer the likely intent of the photographer, and the "branch-and-bound" efficient subwindow search optimization technique, which seeks to locate the globally optimal cropping rectangle in a fast manner. Unlike most current autocrop methods, which can only crop a photo into an arbitrary rectangle, our autocrop method can automatically crop a photo into either a rectangle of arbitrary dimensions or a rectangle of the desired aspect ratio specified by the user. The aggressiveness of the cropping operation may be either automatically determined by the method or manually indicated by the user with ease. In addition, our autocrop method is extended to support the cropping of a photo into non-rectangular shapes such as polygons of any number of sides. It may also be potentially extended to return multiple cropping suggestions, which will enable the creation of new photos to enrich the original photo collections. Our experimental results show that the proposed autocrop method in this paper can generate high-quality crops for consumer photos of various types.

Restoration methods for deepwater swamps

Treesearch

William H. Conner; Kenneth W. McLeod; Ellen Colodney

2000-01-01

Planting in deepwater swamp areas is difficult and time consuming, and nursery-grown seedlings are often not suited for such conditions. Baldcypress [Taxodium distichum (L.) Rich.], water tupelo (Nyssa aquatica L.), swamp blackgum [N. sylvatica var. biflora (Walt.) Sarg.], and green ash (

Corrosion performance tests for reinforcing steel in concrete : test procedures.

DOT National Transportation Integrated Search

2009-09-01

The existing test method to assess the corrosion performance of reinforcing steel embedded in concrete, mainly : ASTM G109, is labor intensive, time consuming, slow to provide comparative results, and often expensive. : However, corrosion of reinforc...

Multi-resolution information mining and a computer vision approach to pavement condition distress analysis.

DOT National Transportation Integrated Search

2014-07-01

Pavement Condition surveys are carried out periodically to gather information on pavement distresses that will guide decision-making for maintenance and preservation. Traditional methods involve manual pavement inspections which are time-consuming : ...

CHARACTERIZATION OF RESIDENTIAL EXPOSURE TO CHLORPYRIFOS AND DIAZINON

EPA Science Inventory

Exposures to chlorpyrifos and diazinon in residential microenvironment in AZ were estimated using the indirect method of exposure calculation by combining measured concentrations in multiple media with time subjects spent indoors, dietary and non-dietary items they consumed, an...

Corrosion performance tests for reinforcing steel in concrete : technical report.

DOT National Transportation Integrated Search

2009-10-01

The existing test method used to assess the corrosion performance of reinforcing steel embedded in : concrete, mainly ASTM G 109, is labor intensive, time consuming, slow to provide comparative results, : and can be expensive. However, with corrosion...

RAPID ON-SITE METHODS OF CHEMICAL ANALYSIS

EPA Science Inventory

The analysis of potentially hazardous air, water and soil samples collected and shipped to service laboratories off-site is time consuming and expensive. This Chapter addresses the practical alternative of performing the requisite analytical services on-site. The most significant...

Investigation of high-strength bolt-tightening verification techniques.

DOT National Transportation Integrated Search

2016-03-01

The current means and methods of verifying that high-strength bolts have been properly tightened are very laborious and time : consuming. In some cases, the techniques require special equipment and, in other cases, the verification itself may be some...

A Comparison of Web-Based Standard Setting and Monitored Standard Setting.

ERIC Educational Resources Information Center

Harvey, Anne L.; Way, Walter D.

Standard setting, when carefully done, can be an expensive and time-consuming process. The modified Angoff method and the benchmark method, as utilized in this study, employ representative panels of judges to provide recommended passing scores to standard setting decision-makers. It has been considered preferable to have the judges meet in a…

[Nutritional status and food consumption among students admitted to nutrition and dietetics programs in the National University Of Colombia].

PubMed

Becerra-Bulla, Fabiola; Vargas-Zarate, Melier

2015-10-01

Objective To determine the nutritional status and some food intake characteristics of first semester nutritional science students. Methods Observational, descriptive and transversal study. Sample of 70 students. A survey was conducted to determine the food intake characteristics. Anthropometric measures were also taken. Excel, Access 2010 and Epi 2002 were used. Measures of central tendency, stratified by gender and age, were determined. Results According to the BMI measures, approximately three in four students were classified as normal. Malnutrition was more prevalent in men than in women. Around 70 % of the students consumed milk and dairy products, and nearly 61 % consumed meat daily. Roughly half of the students consumed eggs between two and three times a week; only 27 % of the students did so every day. 50 % of the students said they consumed fruit juice daily, and only 37 % of the survey respondents consumed whole fruits with the same frequency. Vegetables were reported as less consumed. About 10 % of the students consumed low nutrient density food (soft drinks, candies and excess fat in the diet) daily. 5 % of the students consumed fast food. Conclusion The students had inappropriate diet and eating habits. This is probably related to the prevalence of malnutrition found.

Improving Personality Facet Scores with Multidimensional Computer Adaptive Testing: An Illustration with the Neo Pi-R

ERIC Educational Resources Information Center

Makransky, Guido; Mortensen, Erik Lykke; Glas, Cees A. W.

2013-01-01

Narrowly defined personality facet scores are commonly reported and used for making decisions in clinical and organizational settings. Although these facets are typically related, scoring is usually carried out for a single facet at a time. This method can be ineffective and time consuming when personality tests contain many highly correlated…

Light scattering sensor for real-time identification of Vibrio parahaemolyticus, V. vulnificus and V. cholera colonies on solid agar plates

USDA-ARS?s Scientific Manuscript database

The three most common pathogenic species of Vibrio, V. cholerae, V. parahemolyticus and V. vulnificus, are of major concern as water- and food-borne pathogens because of an increasing incidence of water and seafood related outbreaks and illnesses worldwide. Current methods are time-consuming and req...

The effects of automated scatter feeders on captive grizzly bear activity budgets.

PubMed

Andrews, Nathan L P; Ha, James C

2014-01-01

Although captive bears are popular zoo attractions, they are known to exhibit high levels of repetitive behaviors (RBs). These behaviors have also made them particularly popular subjects for welfare research. To date, most research on ursid welfare has focused on various feeding methods that seek to increase time spent searching for, extracting, or consuming food. Prior research indicates an average of a 50% reduction in RBs when attempts are successful and, roughly, a 50% success rate across studies. This research focused on decreasing time spent in an RB while increasing the time spent active by increasing time spent searching for, extracting, and consuming food. The utility of timed, automated scatter feeders was examined for use with captive grizzly bears (Ursis arctos horribilis). Findings include a significant decrease in time spent in RB and a significant increase in time spent active while the feeders were in use. Further, the bears exhibited a wider range of behaviors and a greater use of their enclosure.

Consumers’ perceptions of energy use and energy savings: A literature review

NASA Astrophysics Data System (ADS)

Lesic, Vedran; Bruine de Bruin, Wändi; Davis, Matthew C.; Krishnamurti, Tamar; Azevedo, Inês M. L.

2018-03-01

Background. Policy makers and program managers need to better understand consumers’ perceptions of their energy use and savings to design effective strategies for promoting energy savings. Methods. We reviewed 14 studies from the emerging interdisciplinary literature examining consumers’ perceptions electricity use by specific appliances, and potential savings. Results. We find that: (1) electricity use is often overestimated for low-energy consuming appliances, and underestimated for high-energy consuming appliances; (2) curtailment strategies are typically preferred over energy efficiency strategies; (3) consumers lack information about how much electricity can be saved through specific strategies; (4) consumers use heuristics for assessing the electricity use of specific appliances, with some indication that more accurate judgments are made among consumers with higher numeracy and stronger pro-environmental attitudes. However, design differences between studies, such as variations in reference points, reporting units and assessed time periods, may affect consumers’ reported perceptions. Moreover, studies differ with regard to whether accuracy of perceptions was evaluated through comparisons with general estimates of actual use, self-reported use, household-level meter readings, or real-time smart meter readings. Conclusion. Although emerging findings are promising, systematic variations in the measurement of perceived and actual electricity use are potential cause for concern. We propose avenues for future research, so as to better understand, and possibly inform, consumers’ perceptions of their electricity use. Ultimately, this literature will have implications for the design of effective electricity feedback for consumers, and related policies.

The use of Whatman-31ET paper for an efficient method for radiochemical purity test of 131I-Hippuran

NASA Astrophysics Data System (ADS)

Rezka Putra, Amal; Maskur; Sugiharto, Yono; Chairuman; Hardi Gunawan, Adang; Awaludin, Rohadi

2018-01-01

Current chromatography methods used for radiochemical purity test of 131I-Hippuran is time consuming. Therefore, in this study we explored several static and mobile phases in order to have a chromatography method which is accurate and efficient or less time consuming. In this study, stationary phases (Whatman-1, 31ET, and 3MM papers) and several mobile phases were explored to separate 131I-Hippuran from its impurity (131I iodide ion). The results of this study showed that the most efficient chromatography system for measurement of radiochemical purity of 131I-Hippuran was by using Whatman-31ET paper and n-butanol: acetic acid: water (4:1:1) as a static phase and mobile phase respectively. Developing time for this method was of approximately 75.7 ± 2.7 minutes. The result of radiochemical purity (%RCP) of 131I-Hippuran measured with this chromatography system either using Whatman-1 or Whatman-31ET paper strips was 98.7%. The short size of Whatman-31ET paper strip (1 x 8 cm) was found to have shorter developing time compared to that of long size paper. This system showed a good separation of 131I-Hippuran from its impurities and gave %RCP of 98.1% ± 0.04% with developing time approximately 44.3 ± 9.4 minutes. The short size of Whatman-31ET paper strips was found to be more efficient compared to that of Whatman-1 and Whatman-3MM paper strips in term of developing time.

Constraint factor graph cut-based active contour method for automated cellular image segmentation in RNAi screening.

PubMed

Chen, C; Li, H; Zhou, X; Wong, S T C

2008-05-01

Image-based, high throughput genome-wide RNA interference (RNAi) experiments are increasingly carried out to facilitate the understanding of gene functions in intricate biological processes. Automated screening of such experiments generates a large number of images with great variations in image quality, which makes manual analysis unreasonably time-consuming. Therefore, effective techniques for automatic image analysis are urgently needed, in which segmentation is one of the most important steps. This paper proposes a fully automatic method for cells segmentation in genome-wide RNAi screening images. The method consists of two steps: nuclei and cytoplasm segmentation. Nuclei are extracted and labelled to initialize cytoplasm segmentation. Since the quality of RNAi image is rather poor, a novel scale-adaptive steerable filter is designed to enhance the image in order to extract long and thin protrusions on the spiky cells. Then, constraint factor GCBAC method and morphological algorithms are combined to be an integrated method to segment tight clustered cells. Compared with the results obtained by using seeded watershed and the ground truth, that is, manual labelling results by experts in RNAi screening data, our method achieves higher accuracy. Compared with active contour methods, our method consumes much less time. The positive results indicate that the proposed method can be applied in automatic image analysis of multi-channel image screening data.

Estimation of toxicity using the Toxicity Estimation Software Tool (TEST)

EPA Science Inventory

Tens of thousands of chemicals are currently in commerce, and hundreds more are introduced every year. Since experimental measurements of toxicity are extremely time consuming and expensive, it is imperative that alternative methods to estimate toxicity are developed.

Cross-validation of resting metabolic rate prediction equations

USDA-ARS?s Scientific Manuscript database

Background: Knowledge of the resting metabolic rate (RMR) is necessary for determining individual total energy requirements. Measurement of RMR is time consuming and requires specialized equipment. Prediction equations provide an easy method to estimate RMR; however, the accuracy of these equations...

Analysis of Explosives in Soil Using Solid Phase Microextraction and Gas Chromatography: Environmental Analysis

DTIC Science & Technology

2006-01-01

ENVIRONMENTAL ANALYSIS Analysis of Explosives in Soil Using Solid Phase Microextraction and Gas Chromatography Howard T. Mayfield Air Force Research...Abstract: Current methods for the analysis of explosives in soils utilize time consuming sample preparation workups and extractions. The method detection...chromatography/mass spectrometry to provide a con- venient and sensitive analysis method for explosives in soil. Keywords: Explosives, TNT, solid phase

Microbiological assessment of house and imported bottled water by comparison of bacterial endotoxin concentration, heterotrophic plate count, and fecal coliform count.

PubMed

Reyes, Mayra I; Pérez, Cynthia M; Negrón, Edna L

2008-03-01

Consumers increasingly use bottled water and home water treatment systems to avoid direct tap water. According to the International Bottled Water Association (IBWA), an industry trade group, 5 billion gallons of bottled water were consumed by North Americans in 2001. The principal aim of this study was to assess the microbial quality of in-house and imported bottled water for human consumption, by measurement and comparison of the concentration of bacterial endotoxin and standard cultivable methods of indicator microorganisms, specifically, heterotrophic and fecal coliform plate counts. A total of 21 brands of commercial bottled water, consisting of 10 imported and 11 in-house brands, selected at random from 96 brands that are consumed in Puerto Rico, were tested at three different time intervals. The Standard Limulus Amebocyte Lysate test, gel clot method, was used to measure the endotoxin concentrations. The minimum endotoxin concentration in 63 water samples was less than 0.0625 EU/mL, while the maximum was 32 EU/mL. The minimum bacterial count showed no growth, while the maximum was 7,500 CFU/mL. Bacterial isolates like P. fluorescens, Corynebacterium sp. J-K, S. paucimobilis, P. versicularis, A. baumannii, P. chlororaphis, F. indologenes, A. faecalis and P. cepacia were identified. Repeated measures analysis of variance demonstrated that endotoxin concentration did not change over time, while there was a statistically significant (p < 0.05) decrease in bacterial count over time. In addition, multiple linear regression analysis demonstrated that a unit change in the concentration of endotoxin across time was associated with a significant (p < 0.05) reduction in the bacteriological cell count. This analysis evidenced a significant time effect in the average log bacteriological cell count. Although bacterial growth was not detected in some water samples, endotoxin was present. Measurement of Gram-negative bacterial endotoxins is one of the methods that have been suggested as a rapid way of determining bacteriological water quality.

Complex dynamics in the Leslie-Gower type of the food chain system with multiple delays

NASA Astrophysics Data System (ADS)

Guo, Lei; Song, Zi-Gen; Xu, Jian

2014-08-01

In this paper, we present a Leslie-Gower type of food chain system composed of three species, which are resource, consumer, and predator, respectively. The digestion time delays corresponding to consumer-eat-resource and predator-eat-consumer are introduced for more realistic consideration. It is called the resource digestion delay (RDD) and consumer digestion delay (CDD) for simplicity. Analyzing the corresponding characteristic equation, the stabilities of the boundary and interior equilibrium points are studied. The food chain system exhibits the species coexistence for the small values of digestion delays. Large RDD/CDD may destabilize the species coexistence and induce the system dynamic into recurrent bloom or system collapse. Further, the present of multiple delays can control species population into the stable coexistence. To investigate the effect of time delays on the recurrent bloom of species population, the Hopf bifurcation and periodic solution are investigated in detail in terms of the central manifold reduction and normal form method. Finally, numerical simulations are performed to display some complex dynamics, which include multiple periodic solution and chaos motion for the different values of system parameters. The system dynamic behavior evolves into the chaos motion by employing the period-doubling bifurcation.

Impacts of demand response and renewable generation in electricity power market

NASA Astrophysics Data System (ADS)

Zhao, Zhechong

This thesis presents the objective of the research which is to analyze the impacts of uncertain wind power and demand response on power systems operation and power market clearing. First, in order to effectively utilize available wind generation, it is usually given the highest priority by assigning zero or negative energy bidding prices when clearing the day-ahead electric power market. However, when congestion occurs, negative wind bidding prices would aggravate locational marginal prices (LMPs) to be negative in certain locations. A load shifting model is explored to alleviate possible congestions and enhance the utilization of wind generation, by shifting proper amount of load from peak hours to off peaks. The problem is to determine proper amount of load to be shifted, for enhancing the utilization of wind generation, alleviating transmission congestions, and making LMPs to be non-negative values. The second piece of work considered the price-based demand response (DR) program which is a mechanism for electricity consumers to dynamically manage their energy consumption in response to time-varying electricity prices. It encourages consumers to reduce their energy consumption when electricity prices are high, and thereby reduce the peak electricity demand and alleviate the pressure to power systems. However, it brings additional dynamics and new challenges on the real-time supply and demand balance. Specifically, price-sensitive DR load levels are constantly changing in response to dynamic real-time electricity prices, which will impact the economic dispatch (ED) schedule and in turn affect electricity market clearing prices. This thesis adopts two methods for examining the impacts of different DR price elasticity characteristics on the stability performance: a closed-loop iterative simulation method and a non-iterative method based on the contraction mapping theorem. This thesis also analyzes the financial stability of DR load consumers, by incorporating explicit LMP formulations and consumer payment requirements into the network-constrained unit commitment (NCUC) problem. The proposed model determines the proper amount of DR loads to be shifted from peak hours to off-peaks under ISO's direct load control, for reducing the operation cost and ensuring that consumer payments of DR loads will not deteriorate significantly after load shifting. Both MINLP and MILP models are discussed, and improved formulation strategies are presented.

Smart Plasmonic Glucose Nanosensors as Generic Theranostic Agents for Targeting-Free Cancer Cell Screening and Killing.

PubMed

Chen, Limei; Li, Haijuan; He, Haili; Wu, Haoxi; Jin, Yongdong

2015-07-07

Fast and accurate identification of cancer cells from healthy normal cells in a simple, generic way is very crucial for early cancer detection and treatment. Although functional nanoparticles, like fluorescent quantum dots and plasmonic Au nanoparticles (NPs), have been successfully applied for cancer cell imaging and photothermal therapy, they suffer from the main drawback of needing time-consuming targeting preparation for specific cancer cell detection and selective ablation. The lack of a generic and effective method therefore limits their potential high-throughput cancer cell preliminary screening and theranostic applications. We report herein a generic in vitro method for fast, targeting-free (avoiding time-consuming preparations of targeting moiety for specific cancer cells) visual screening and selective killing of cancer cells from normal cells, by using glucose-responsive/-sensitive glucose oxidase-modified Ag/Au nanoshells (Ag/Au-GOx NSs) as a smart plasmonic theranostic agent. The method is generic to some extent since it is based on the distinct localized surface plasmon resonance (LSPR) responses (and colors) of the smart nanoprobe with cancer cells (typically have a higher glucose uptake level) and normal cells.

Reconstruction of coded aperture images

NASA Technical Reports Server (NTRS)

Bielefeld, Michael J.; Yin, Lo I.

1987-01-01

Balanced correlation method and the Maximum Entropy Method (MEM) were implemented to reconstruct a laboratory X-ray source as imaged by a Uniformly Redundant Array (URA) system. Although the MEM method has advantages over the balanced correlation method, it is computationally time consuming because of the iterative nature of its solution. Massively Parallel Processing, with its parallel array structure is ideally suited for such computations. These preliminary results indicate that it is possible to use the MEM method in future coded-aperture experiments with the help of the MPP.

Surveying Consumer Satisfaction to Assess Managed-Care Quality: Current Practices

PubMed Central

Gold, Marsha; Wooldridge, Judith

1995-01-01

Growing interest in using consumer satisfaction information to enhance quality of care and promote informed consumer choice has accompanied recent expansions in managed care. This article synthesizes information about consumer satisfaction surveys conducted by managed-care plans, government and other agencies, community groups, and purchasers of care. We discuss survey content, methods, and use of consumer survey information. Differences in the use of consumer surveys preclude one instrument or methodology from meeting all needs. The effectiveness of plan-based surveys could be enhanced by increased information on alternative survey instruments and methods and new methodological studies, such as ones developing risk-adjustment methods. PMID:10151887

GPUs benchmarking in subpixel image registration algorithm

NASA Astrophysics Data System (ADS)

Sanz-Sabater, Martin; Picazo-Bueno, Jose Angel; Micó, Vicente; Ferrerira, Carlos; Granero, Luis; Garcia, Javier

2015-05-01

Image registration techniques are used among different scientific fields, like medical imaging or optical metrology. The straightest way to calculate shifting between two images is using the cross correlation, taking the highest value of this correlation image. Shifting resolution is given in whole pixels which cannot be enough for certain applications. Better results can be achieved interpolating both images, as much as the desired resolution we want to get, and applying the same technique described before, but the memory needed by the system is significantly higher. To avoid memory consuming we are implementing a subpixel shifting method based on FFT. With the original images, subpixel shifting can be achieved multiplying its discrete Fourier transform by a linear phase with different slopes. This method is high time consuming method because checking a concrete shifting means new calculations. The algorithm, highly parallelizable, is very suitable for high performance computing systems. GPU (Graphics Processing Unit) accelerated computing became very popular more than ten years ago because they have hundreds of computational cores in a reasonable cheap card. In our case, we are going to register the shifting between two images, doing the first approach by FFT based correlation, and later doing the subpixel approach using the technique described before. We consider it as `brute force' method. So we will present a benchmark of the algorithm consisting on a first approach (pixel resolution) and then do subpixel resolution approaching, decreasing the shifting step in every loop achieving a high resolution in few steps. This program will be executed in three different computers. At the end, we will present the results of the computation, with different kind of CPUs and GPUs, checking the accuracy of the method, and the time consumed in each computer, discussing the advantages, disadvantages of the use of GPUs.

Development of a Double Glass Mounting Method Using Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) and its Evaluation for Permanent Mounting of Small Nematodes

PubMed Central

ZAHABIUN, Farzaneh; SADJJADI, Seyed Mahmoud; ESFANDIARI, Farideh

2015-01-01

Background: Permanent slide preparation of nematodes especially small ones is time consuming, difficult and they become scarious margins. Regarding this problem, a modified double glass mounting method was developed and compared with classic method. Methods: A total of 209 nematode samples from human and animal origin were fixed and stained with Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) followed by double glass mounting and classic dehydration method using Canada balsam as their mounting media. The slides were evaluated in different dates and times, more than four years. Different photos were made with different magnification during the evaluation time. Results: The double glass mounting method was stable during this time and comparable with classic method. There were no changes in morphologic structures of nematodes using double glass mounting method with well-defined and clear differentiation between different organs of nematodes in this method. Conclusion: Using this method is cost effective and fast for mounting of small nematodes comparing to classic method. PMID:26811729

Belgian and Spanish consumption data and consumer handling practices for fresh fruits and vegetables useful for further microbiological and chemical exposure assessment.

PubMed

Jacxsens, L; Ibañez, I Castro; Gómez-López, V M; Fernandes, J Araujo; Allende, A; Uyttendaele, M; Huybrechts, I

2015-04-01

A consumer survey was organized in Spain and Belgium to obtain consumption data and to gain insight into consumer handling practices for fresh vegetables consumed raw or minimally processed (i.e., heads of leafy greens, bell peppers, tomatoes, fresh herbs, and precut and packed leafy greens) and fruits to be consumed without peeling (i.e., apples, grapes, strawberries, raspberries, other berries, fresh juices, and precut mixed fruit). This information can be used for microbiological and/or chemical food safety research. After extensive cleanup of rough databases for missing and extreme values and age correction, information from 583 respondents from Spain and 1,605 respondents from Belgium (18 to 65 years of age) was retained. Daily intake (grams per day) was calculated taking into account frequency and seasonality of consumption, and distributions were obtained that can be used in quantitative risk assessment for chemical hazards with chronic effects on human health. Data also were recalculated to obtain discrete distributions of consumption per portion and the corresponding frequency of consumption, which can be used in acute microbiological risk assessment or outbreak investigations. The ranked median daily consumption of fruits and vegetables was similar in Spain and Belgium: apple > strawberry > grapes > strawberries and raspberries; and tomatoes > leafy greens > bell peppers > fresh herbs. However, vegetable consumption was higher (in terms of both portion and frequency of consumption) in Spain than in Belgium, whereas the opposite was found for fruit consumption. Regarding consumer handling practices related to storage time and method, Belgian consumers less frequently stored their fresh produce in a refrigerator and did so for shorter times compared with Spanish consumers. Washing practices for lettuce heads and packed leafy greens also were different. The survey revealed differences between these two countries in consumption and consumer handling practices, which can have an impact on outcomes of future microbiological or chemical risk assessment studies.

Trend of telomerase activity change during human iPSC self-renewal and differentiation revealed by a quartz crystal microbalance based assay

NASA Astrophysics Data System (ADS)

Zhou, Yitian; Zhou, Ping; Xin, Yinqiang; Wang, Jie; Zhu, Zhiqiang; Hu, Ji; Wei, Shicheng; Ma, Hongwei

2014-11-01

Telomerase plays an important role in governing the life span of cells for its capacity to extend telomeres. As high activity of telomerase has been found in stem cells and cancer cells specifically, various methods have been developed for the evaluation of telomerase activity. To overcome the time-consuming procedures and complicated manipulations of existing methods, we developed a novel method named Telomeric Repeat Elongation Assay based on Quartz crystal microbalance (TREAQ) to monitor telomerase activity during the self-renewal and differentiation of human induced pluripotent stem cells (hiPSCs). TREAQ results indicated hiPSCs possess invariable telomerase activity for 11 passages on Matrigel and a steady decline of telomerase activity when differentiated for different periods, which is confirmed with existing golden standard method. The pluripotency of hiPSCs during differentiation could be estimated through monitoring telomerase activity and compared with the expression levels of markers of pluripotency gene via quantitative real time PCR. Regular assessment for factors associated with pluripotency or stemness was expensive and requires excessive sample consuming, thus TREAQ could be a promising alternative technology for routine monitoring of telomerase activity and estimate the pluripotency of stem cells.

Recent Advances in Mycotoxin Determination for Food Monitoring via Microchip

PubMed Central

Man, Yan; Liang, Gang; Li, An; Pan, Ligang

2017-01-01

Mycotoxins are one of the main factors impacting food safety. Mycotoxin contamination has threatened the health of humans and animals. Conventional methods for the detection of mycotoxins are gas chromatography (GC) or liquid chromatography (LC) coupled with mass spectrometry (MS), or enzyme-linked immunosorbent assay (ELISA). However, all these methods are time-consuming, require large-scale instruments and skilled technicians, and consume large amounts of hazardous regents and solvents. Interestingly, a microchip requires less sample consumption and short analysis time, and can realize the integration, miniaturization, and high-throughput detection of the samples. Hence, the application of a microchip for the detection of mycotoxins can make up for the deficiency of the conventional detection methods. This review focuses on the application of a microchip to detect mycotoxins in foods. The toxicities of mycotoxins and the materials of the microchip are firstly summarized in turn. Then the application of a microchip that integrates various kinds of detection methods (optical, electrochemical, photo-electrochemical, and label-free detection) to detect mycotoxins is reviewed in detail. Finally, challenges and future research directions in the development of a microchip to detect mycotoxins are previewed. PMID:29036884

A comparison study on microwave-assisted extraction of Artemisia sphaerocephala polysaccharides with conventional method: Molecule structure and antioxidant activities evaluation.

PubMed

Wang, Junlong; Zhang, Ji; Wang, Xiaofang; Zhao, Baotang; Wu, Yiqian; Yao, Jian

2009-12-01

The conventional extraction methods for polysaccharides were time-consuming, laborious and energy-consuming. Microwave-assisted extraction (MAE) technique was employed for the extraction of Artemisia sphaerocephala polysaccharides (ASP), which is a traditional Chinese food. The extracting parameters were optimized by Box-Behnken design. In microwave heating process, a decrease in molecular weight (M(w)) was detected in SEC-LLS measurement. A d(f) value of 2.85 indicated ASP using MAE exhibited as a sphere conformation of branched clusters in aqueous solution. Furthermore, it showed stronger antioxidant activities compared with hot water extraction. The data obtained showed that the molecular weights played a more important role in antioxidant activities.

Temporal Drivers of Liking Based on Functional Data Analysis and Non-Additive Models for Multi-Attribute Time-Intensity Data of Fruit Chews.

PubMed

Kuesten, Carla; Bi, Jian

2018-06-03

Conventional drivers of liking analysis was extended with a time dimension into temporal drivers of liking (TDOL) based on functional data analysis methodology and non-additive models for multiple-attribute time-intensity (MATI) data. The non-additive models, which consider both direct effects and interaction effects of attributes to consumer overall liking, include Choquet integral and fuzzy measure in the multi-criteria decision-making, and linear regression based on variance decomposition. Dynamics of TDOL, i.e., the derivatives of the relative importance functional curves were also explored. Well-established R packages 'fda', 'kappalab' and 'relaimpo' were used in the paper for developing TDOL. Applied use of these methods shows that the relative importance of MATI curves offers insights for understanding the temporal aspects of consumer liking for fruit chews.

Evaluating Process Improvement Courses of Action Through Modeling and Simulation

DTIC Science & Technology

2017-09-16

changes to a process is time consuming and has potential to overlook stochastic effects. By modeling a process as a Numerical Design Structure Matrix...13 Methods to Evaluate Process Performance ................................................................15 The Design Structure...Matrix ......................................................................................16 Numerical Design Structure Matrix

Label-free detection of salmonella typhimurium with ssDNA aptamers

USDA-ARS?s Scientific Manuscript database

Foodborne pathogen Salmonella enterica is one of the major causes of gastrointestinal infections in human and animals. Conventional detection methods are time consuming and not effective enough under emergency circumstances to control outbreaks immediately. Therefore, biosensors that can detect Salm...

A SIMPLE MULTIPLEX POLYMERASE CHAIN REACTION ASSAY FOR THE IDENTIFICATION OF FOUR ENVIRONMENTALLY RELEVANT FUNGAL CONTAMINANTS

EPA Science Inventory

Historically, identification of filamentous fungal (mold) species has been based on morphological characteristics, both macroscopic and microscopic. These methods have proven to be time consuming and inaccurate, necessitating the development of identification protocols that are ...

A screening approach using zebrafish for the detection and characterization of developmental neurotoxicity.

EPA Science Inventory

Thousands of chemicals have little or no data to support developmental neurotoxicity risk assessments. Current developmental neurotoxicity guideline studies mandating mammalian model systems are expensive and time consuming. Therefore a rapid, cost-effective method to assess de...

Cross-validation of recent and longstanding resting metabolic rate prediction equations

USDA-ARS?s Scientific Manuscript database

Resting metabolic rate (RMR) measurement is time consuming and requires specialized equipment. Prediction equations provide an easy method to estimate RMR; however, their accuracy likely varies across individuals. Understanding the factors that influence predicted RMR accuracy at the individual lev...

School Readiness and the Draw-a-Man Test: An Empiricaly Derived Alternative to Harris' Scoring System.

ERIC Educational Resources Information Center

Simner, Marvin L.

1985-01-01

An abbreviated scoring system for the Goodenough-Harris Draw-A-Man Test found that three items had the same overall potential for correctly identifying at-risk kindergarteners as more time-consuming scoring methods. (CL)

Detection of enteric viruses in shellfish

USDA-ARS?s Scientific Manuscript database

Norovirus and hepatitis A virus contamination are significant threats to the safety of shellfish and other foods. Methods for the extraction and assay of these viruses from shellfish are complex, time consuming, and technically challenging. Here, we itemize some of the salient points in extracting...

Graphing Polar Curves

ERIC Educational Resources Information Center

Lawes, Jonathan F.

2013-01-01

Graphing polar curves typically involves a combination of three traditional techniques, all of which can be time-consuming and tedious. However, an alternative method--graphing the polar function on a rectangular plane--simplifies graphing, increases student understanding of the polar coordinate system, and reinforces graphing techniques learned…

40 CFR Appendix Ix to Part 266 - Methods Manual for Compliance With the BIF Regulations

Code of Federal Regulations, 2013 CFR

2013-07-01

.... However, it is more time-consuming and is recommended only if the basic approach fails to meet the risk... used to evaluate the acceptability of the CEMS at the time of its installation or whenever specified in regulations or permits. The procedures are not designed to evaluate CEMS performance over an extended period...

40 CFR Appendix Ix to Part 266 - Methods Manual for Compliance With the BIF Regulations

Code of Federal Regulations, 2014 CFR

2014-07-01

.... However, it is more time-consuming and is recommended only if the basic approach fails to meet the risk... used to evaluate the acceptability of the CEMS at the time of its installation or whenever specified in regulations or permits. The procedures are not designed to evaluate CEMS performance over an extended period...

40 CFR Appendix Ix to Part 266 - Methods Manual for Compliance With the BIF Regulations

Code of Federal Regulations, 2012 CFR

2012-07-01

.... However, it is more time-consuming and is recommended only if the basic approach fails to meet the risk... used to evaluate the acceptability of the CEMS at the time of its installation or whenever specified in regulations or permits. The procedures are not designed to evaluate CEMS performance over an extended period...

Development of a Double Glass Mounting Method Using Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) and its Evaluation for Permanent Mounting of Small Nematodes.

PubMed

Zahabiun, Farzaneh; Sadjjadi, Seyed Mahmoud; Esfandiari, Farideh

2015-01-01

Permanent slide preparation of nematodes especially small ones is time consuming, difficult and they become scarious margins. Regarding this problem, a modified double glass mounting method was developed and compared with classic method. A total of 209 nematode samples from human and animal origin were fixed and stained with Formaldehyde Alcohol Azocarmine Lactophenol (FAAL) followed by double glass mounting and classic dehydration method using Canada balsam as their mounting media. The slides were evaluated in different dates and times, more than four years. Different photos were made with different magnification during the evaluation time. The double glass mounting method was stable during this time and comparable with classic method. There were no changes in morphologic structures of nematodes using double glass mounting method with well-defined and clear differentiation between different organs of nematodes in this method. Using this method is cost effective and fast for mounting of small nematodes comparing to classic method.

Novel and successful free comments method for sensory characterization of chocolate ice cream: A comparative study between pivot profile and comment analysis.

PubMed

Fonseca, Fernando G A; Esmerino, Erick A; Filho, Elson R Tavares; Ferraz, Juliana P; da Cruz, Adriano G; Bolini, Helena M A

2016-05-01

Rapid sensory profiling methods have gained space in the sensory evaluation field. Techniques using direct analysis of the terms generated by consumers are considered easy to perform, without specific training requirements, thus improving knowledge about consumer perceptions on various products. This study aimed to determine the sensory profile of different commercial samples of chocolate ice cream, labeled as conventional and light or diet, using the "comment analysis" and "pivot profile" methods, based on consumers' perceptions. In the comment analysis task, consumers responded to 2 separate open questions describing the sensory attributes they liked or disliked in each sample. In the pivot profile method, samples were served in pairs (consisting of a coded sample and pivot), and consumers indicated the higher and lower intensity attributes in the target sample compared with the pivot. We observed that both methods were able to characterize the different chocolate ice cream samples using consumer perception, with high correlation results and configurational similarity (regression vector coefficient=0.917) between them. However, it is worth emphasizing that comment analysis is performed intuitively by consumers, whereas the pivot profile method showed high analytical and discriminative power even using consumers, proving to be a promising technique for routine application when classical descriptive methods cannot be used. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Removing Hair Safely

MedlinePlus

... For Consumers Home For Consumers Consumer Updates Removing Hair Safely Share Tweet Linkedin Pin it More sharing ... related to common methods of hair removal. Laser Hair Removal In this method, a laser destroys hair ...

Consumer willingness to invest money and time for benefits of lifestyle behaviour change: an application of the contingent valuation method.

PubMed

Alayli-Goebbels, Adrienne F G; van Exel, Job; Ament, André J H A; de Vries, Nanne K; Bot, Sandra D M; Severens, Johan L

2015-12-01

To use contingent valuation (CV) to derive individual consumer values for both health and broader benefits of a public-health intervention directed at lifestyle behaviour change (LBC) and to examine the feasibility and validity of the method. Participants of a lifestyle intervention trial (n = 515) were invited to complete an online CV survey. Respondents (n = 312) expressed willingness to invest money and time for changes in life expectancy, health-related quality of life (HRQOL) and broader quality of life aspects. Internal validity was tested for by exploring associations between explanatory variables (i.e. income, paid work, experience and risk factors for cardiovascular diseases) and willingness to invest, and by examining ordering effects and respondents' sensitivity to the scope of the benefits. The majority of respondents (94.3%) attached value to benefits of LBC, and 87.4% were willing to invest both money and time. Respondents were willing to invest more for improvements in HRQOL (€42/month; 3 h/week) and broader quality of life aspects (€40/month; 2.6 h/week) than for improvements in life expectancy (€24/month; 2 h/week). Protest answers were limited (3%) and findings regarding internal validity were mixed. The importance of broader quality of life outcomes to consumers suggests that these outcomes are relevant to be considered in the decision making. Our research showed that CV is a feasible method to value both health and broader outcomes of LBC, but generalizability to other areas of public health still needs to be examined. Mixed evidence regarding internal validity pleads for caution to use CV as only the base for decision making. © 2014 John Wiley & Sons Ltd.

Consumer behaviour survey for assessing exposure from consumer products: a feasibility study.

PubMed

Schneider, Klaus; Recke, Selina; Kaiser, Eva; Götte, Sebastian; Berkefeld, Henrike; Lässig, Juliane; Rüdiger, Thomas; Lindtner, Oliver; Oltmanns, Jan

2018-05-23

Evaluating chemical exposures from consumer products is an essential part of chemical safety assessments under REACH and may also be important to demonstrate compliance with consumer product legislation. Modelling of consumer exposure needs input information on the substance (e.g. vapour pressure), the product(s) containing the substance (e.g. concentration) and on consumer behaviour (e.g. use frequency and amount of product used). This feasibility study in Germany investigated methods for conducting a consumer survey in order to identify and retrieve information on frequency, duration, use amounts and use conditions for six example product types (four mixtures, two articles): hand dishwashing liquid, cockpit spray, fillers, paints and lacquers, shoes made of rubber or plastic, and ball-pens/pencils. Retrospective questionnaire methods (Consumer Product Questionnaire (CPQ), and Recall-Foresight Questionnaire (RFQ)) as well as protocol methods (written reporting by participants and video documentation) were used. A combination of retrospective questionnaire and written protocol methods was identified to provide valid information in a resource-efficient way. Relevant information, which can readily be used in exposure modelling, was obtained for all parameters and product types investigated. Based on the observations in this feasibility study, recommendations are given for designing a large consumer survey.

Development of a Novel Quantitative Adverse Outcome Pathway Predictive Model for Lung Cancer

EPA Science Inventory

Traditional methods for carcinogenicity testing are resource-intensive, retrospective, and time consuming. An increasing testing burden has generated interest in the adverse outcome pathway (AOP) concept as a tool to evaluate chemical safety in a more efficient, rapid and effecti...

Development of a pungency measuring system for red-pepper powder

USDA-ARS?s Scientific Manuscript database

Capsaicinoids are the main components that determine the spiciness level of red-pepper powders. Current pungency measurement is mostly dependent on HPLC measurement technique, which is a sample-destructive, labor-intensive, time-consuming, and expensive method. In this research, a nondestructive on-...

LOCATING LEAKS WITH ACOUSTIC TECHNOLOGY

EPA Science Inventory

Many water distribution systems in this country are almost 100 years old. About 26 percent of piping in these systems is made of unlined cast iron or steel and is in poor condition. Many methods that locate leaks in these pipes are time-consuming, costly, disruptive to operations...

Sharing Teaching Ideas.

ERIC Educational Resources Information Center

Mathematics Teacher, 1985

1985-01-01

Discusses: (1) use of matrix techniques to write secret codes (includes ready-to-duplicate worksheets); (2) a method of multiplication and division of polynomials in one variable that is not tedius, time-consuming, or dependent on guesswork; and (3) adding and subtracting rational expressions and solving rational equations. (JN)

Review and evaluation of models that produce trip tables from ground counts : interim report.

DOT National Transportation Integrated Search

1996-01-01

This research effort was motivated by the desires of planning agencies to seek alternative methods of deriving current or base year Origin-Destination (O-D) trip tables without adopting conventional O-D surveys that are expensive, time consuming and ...

Classification of corn kernels contaminated with aflatoxins using fluorescence and reflectance hyperspectral image analysis

USDA-ARS?s Scientific Manuscript database

Aflatoxins are secondary metabolites produced by certain fungal species of the Aspergillus genus. Aflatoxin contamination remains a problem in agricultural products due to its toxic and carcinogenic properties. Conventional chemical methods for aflatoxin detection are time-consuming and destructive....

Gamete selection for forage quality improvement in tall fescue

USDA-ARS?s Scientific Manuscript database

Within the Festuca-Lolium genome complex there is a need for modern breeding approaches that facilitate the rapid development of improved germplasm or cultivars. Traditional recurrent or mass-selection methods for population or synthetic development are labor intensive and time consuming. The use ...

16 CFR 610.3 - Streamlined process for requesting annual file disclosures from nationwide specialty consumer...

Code of Federal Regulations, 2010 CFR

2010-01-01

... and prominently posted on any website owned or maintained by the nationwide specialty consumer... by any additional available request methods; and (2) Be designed, funded, implemented, maintained... consumers request while the consumer is in the process of making a request; (B) For a website request method...

16 CFR 610.3 - Streamlined process for requesting annual file disclosures from nationwide specialty consumer...

Code of Federal Regulations, 2012 CFR

2012-01-01

... and prominently posted on any website owned or maintained by the nationwide specialty consumer... by any additional available request methods; and (2) Be designed, funded, implemented, maintained... consumers request while the consumer is in the process of making a request; (B) For a website request method...

16 CFR 610.3 - Streamlined process for requesting annual file disclosures from nationwide specialty consumer...

Code of Federal Regulations, 2011 CFR

2011-01-01

... and prominently posted on any website owned or maintained by the nationwide specialty consumer... by any additional available request methods; and (2) Be designed, funded, implemented, maintained... consumers request while the consumer is in the process of making a request; (B) For a website request method...

Exploration of consumer perception of Sauvignon Blanc wines with enhanced aroma properties using two different descriptive methods.

PubMed

Lezaeta, Alvaro; Bordeu, Edmundo; Næs, Tormod; Varela, Paula

2017-09-01

The aim of this study was to evaluate consumers' perception of a complex set of stimuli as aromatically enriched wines. For that, two consumer based profiling methods were compared, concurrently run with overall liking measurements: projective mapping based on choice or preference (PM-C), a newly proposed method, and check-all-that-apply (CATA) questions with an ideal sample, a more established, consumer-based method for product optimization. Reserve bottling and regular bottling of Sauvignon Blanc wines from three wineries were aromatically enriched with natural aromas collected by condensation during wine fermentation. A total of 144 consumers were enrolled in the study. The results revealed that both consumer-based highlighted the positive effect of aromatic enrichment on consumer perception and acceptance. However, PM-C generated a very detailed description, in which consumers focused less on the sensory aspects and more on the usage, attitudes, and reasons behind their choices. Providing a deeper understanding of the drivers of liking/disliking of enriched Sauvignon Blanc wines. Copyright © 2017 Elsevier Ltd. All rights reserved.

Consumer facial expression in relation to smoked ham with the use of face reading technology. The methodological aspects and informative value of research results.

PubMed

Kostyra, Eliza; Rambuszek, Michał; Waszkiewicz-Robak, Bożena; Laskowski, Wacław; Blicharski, Tadeusz; Poławska, Ewa

2016-09-01

The study determined the emotional reactions of consumers in relation to hams using face visualization method, which was recorded by FaceReader (FR). The aims of the research were to determine the effect of the ham samples on the type of emotion, to examine more deeply the individual emotional reactions of consumers and to analyse the emotional variability with regard to the temporal measurement of impressions. The research involved testing the effectiveness of measuring emotions in response to the ongoing flavour impression after consumption of smoked hams. It was found that for all of the assessed samples, neutral and negative emotions prevailed as the overall emotions recorded during the assessment of the taste/flavour impression. The range of variability of the overall emotions depended more on the consumer reactions and less on the properties of the assessed product. Consumers expressed various emotions in time and the ham samples evoked different emotional reactions as an effect of duration of the impression. Copyright © 2016 Elsevier Ltd. All rights reserved.

A neurite quality index and machine vision software for improved quantification of neurodegeneration.

PubMed

Romero, Peggy; Miller, Ted; Garakani, Arman

2009-12-01

Current methods to assess neurodegradation in dorsal root ganglion cultures as a model for neurodegenerative diseases are imprecise and time-consuming. Here we describe two new methods to quantify neuroprotection in these cultures. The neurite quality index (NQI) builds upon earlier manual methods, incorporating additional morphological events to increase detection sensitivity for the detection of early degeneration events. Neurosight is a machine vision-based method that recapitulates many of the strengths of NQI while enabling high-throughput screening applications with decreased costs.

Self-organized neural maps of human protein sequences.

PubMed Central

Ferrán, E. A.; Pflugfelder, B.; Ferrara, P.

1994-01-01

We have recently described a method based on artificial neural networks to cluster protein sequences into families. The network was trained with Kohonen's unsupervised learning algorithm using, as inputs, the matrix patterns derived from the dipeptide composition of the proteins. We present here a large-scale application of that method to classify the 1,758 human protein sequences stored in the SwissProt database (release 19.0), whose lengths are greater than 50 amino acids. In the final 2-dimensional topologically ordered map of 15 x 15 neurons, proteins belonging to known families were associated with the same neuron or with neighboring ones. Also, as an attempt to reduce the time-consuming learning procedure, we compared 2 learning protocols: one of 500 epochs (100 SUN CPU-hours [CPU-h]), and another one of 30 epochs (6.7 CPU-h). A further reduction of learning-computing time, by a factor of about 3.3, with similar protein clustering results, was achieved using a matrix of 11 x 11 components to represent the sequences. Although network training is time consuming, the classification of a new protein in the final ordered map is very fast (14.6 CPU-seconds). We also show a comparison between the artificial neural network approach and conventional methods of biosequence analysis. PMID:8019421

Evolution of the Interstellar Gas Fraction Over Cosmic Time

NASA Astrophysics Data System (ADS)

Wiklind, Tommy; CANDELS

2018-01-01

Galaxies evolve by transforming gas into stars. The gas is acquired through accretion and mergers and is a highly intricate process where feed-back processes play an important role. Directly measuring the gas content in distant galaxies is, however, both complicated and time consuming. A direct observations involves either observing neutral hydrogen using the 21cm line or observing the molecular gas component using tracer molecules such as CO. The former method is impeded by man-made radio interference, and the latter is time consuming even with sensitive instruments such s ALMA. An indirect method is to observe the Raleigh-Jeans part of the dust SED and from this infer the gas mass. Here we present the results from a project using ALMA to measure the RJ part of the dust SED in a carefully selected sample of 70 galaxies at redshifts z=2-5. The galaxies are selected solely based on their redshift and stellar mass and therefore represents an unbiased sample. The stellar masses are selected using the MEAM method and thus the sample corresponds to progenitors of a z=0 galaxy of a particular stellar mass. Preliminary results show that the average gas fraction increases with redshift over the range z=2-3 in accordance with theoretical models, but at z≥4 the observed gas fraction is lower.

Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

PubMed Central

Hu, Yu-Chen

2018-01-01

The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved by 13.97%. PMID:29702607

Sampling Methods for Detection and Monitoring of the Asian Citrus Psyllid (Hemiptera: Psyllidae).

PubMed

Monzo, C; Arevalo, H A; Jones, M M; Vanaclocha, P; Croxton, S D; Qureshi, J A; Stansly, P A

2015-06-01

The Asian citrus psyllid (ACP), Diaphorina citri Kuwayama is a key pest of citrus due to its role as vector of citrus greening disease or "huanglongbing." ACP monitoring is considered an indispensable tool for management of vector and disease. In the present study, datasets collected between 2009 and 2013 from 245 citrus blocks were used to evaluate precision, sensitivity for detection, and efficiency of five sampling methods. The number of samples needed to reach a 0.25 standard error-mean ratio was estimated using Taylor's power law and used to compare precision among sampling methods. Comparison of detection sensitivity and time expenditure (cost) between stem-tap and other sampling methodologies conducted consecutively at the same location were also assessed. Stem-tap sampling was the most efficient sampling method when ACP densities were moderate to high and served as the basis for comparison with all other methods. Protocols that grouped trees near randomly selected locations across the block were more efficient than sampling trees at random across the block. Sweep net sampling was similar to stem-taps in number of captures per sampled unit, but less precise at any ACP density. Yellow sticky traps were 14 times more sensitive than stem-taps but much more time consuming and thus less efficient except at very low population densities. Visual sampling was efficient for detecting and monitoring ACP at low densities. Suction sampling was time consuming and taxing but the most sensitive of all methods for detection of sparse populations. This information can be used to optimize ACP monitoring efforts. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Soil analysis based on sa,ples withdrawn from different volumes: correlation versus calibration

Treesearch

Lucian Weilopolski; Kurt Johnsen; Yuen Zhang

2010-01-01

Soil, particularly in forests, is replete with spatial variation with respect to soil C. Th e present standard chemical method for soil analysis by dry combustion (DC) is destructive, and comprehensive sampling is labor intensive and time consuming. Th ese, among other factors, are contributing to the development of new methods for soil analysis. Th ese include a near...

Health care encounters in Danish chiropractic practice from a consumer perspectives - a mixed methods investigation.

PubMed

Myburgh, Corrie; Boyle, Eleanor; Larsen, Johanne Brinch; Christensen, Henrik Wulff

2016-01-01

Perceived value is the key ingredient to carving and maintaining a competitive business niche. The opportunities to interact with consumers to understand and enhance perceived value are termed 'touch points'. Due to the out-of-pocket expense incurred by patients, Danish chiropractors are subject to consumer trends and behaviors. The purpose of this investigation was to explore and describe consumer touch points relevant to perceived value through healthcare journeys in chiropractic practices. We designed a convergent parallel, mixed methods study. Our purposive sampling framework identified 11 chiropractic clinics from which we collected observational field notes, video recordings and face-to-face interviews. Data was collected between April 14(th) and June 26(th) 2014. We described the exteriors and interiors of all participant clinics, interviewed 32 staff members, 12 new patients and 36 follow-up patients and finally video recorded 11 new and 24 follow-up consultations. Categorization and analysis led to the emergence six consumer touch point themes: 'the internet', 'the physical environment', 'practice models', 'administrative staff', 'the consultation sequence and timing' and 'a consultation that adds value'. The Internet functions as a tool when choosing/confirming a clinic as appropriate, developing and initial image and managing appointments. The administrative hub appears integral to the shaping of positive consumer experiences outside of the consultation. Clinic location, practice model and interior design may contribute to context effects and thus may influence value perception during the clinical encounter. The duration of hands-on treatment received from the chiropractor is not an apparent consumer focus point. Rather, through a seven stage clinical procedure patients value consultations with clinicians who demonstrate professional competence by effective communication diagnosis/management and facilitating satisfactory treatment outcomes. At least six consumer touch points add/detract from value-related experiences in chiropractic practices. The duration of hands-on treatment per se does not appear to be a particular focus point. More research is required to explore this issue.

Development of efficient time-evolution method based on three-term recurrence relation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akama, Tomoko, E-mail: a.tomo---s-b-l-r@suou.waseda.jp; Kobayashi, Osamu; Nanbu, Shinkoh, E-mail: shinkoh.nanbu@sophia.ac.jp

The advantage of the real-time (RT) propagation method is a direct solution of the time-dependent Schrödinger equation which describes frequency properties as well as all dynamics of a molecular system composed of electrons and nuclei in quantum physics and chemistry. Its applications have been limited by computational feasibility, as the evaluation of the time-evolution operator is computationally demanding. In this article, a new efficient time-evolution method based on the three-term recurrence relation (3TRR) was proposed to reduce the time-consuming numerical procedure. The basic formula of this approach was derived by introducing a transformation of the operator using the arcsine function.more » Since this operator transformation causes transformation of time, we derived the relation between original and transformed time. The formula was adapted to assess the performance of the RT time-dependent Hartree-Fock (RT-TDHF) method and the time-dependent density functional theory. Compared to the commonly used fourth-order Runge-Kutta method, our new approach decreased computational time of the RT-TDHF calculation by about factor of four, showing the 3TRR formula to be an efficient time-evolution method for reducing computational cost.« less

Association of sugar-sweetened beverage intake frequency and asthma among U.S. adults, 2013

PubMed Central

Park, Sohyun; Akinbami, Lara J.; McGuire, Lisa C.; Blanck, Heidi M.

2016-01-01

Objectives Sugar-sweetened beverage (SSB) intake among U.S. adults is associated with obesity and type 2 diabetes. An association between SSB intake and asthma has been shown among U.S. children and Australian adults, but scant published information exists for U.S. adults. We examined associations between SSB intake and current asthma among U.S. adults, and the role of obesity in this association. Methods We analyzed 2013 Behavioral Risk Factor Surveillance System data for 146,990 adults (≥18 years) from 23 states and the District of Columbia. We used multivariable logistic regression to estimate associations between current asthma and frequency (none, <1 time/day, once/day, ≥2 times/day) of SSB intake (soda, fruit drink, sweet tea, and sports/energy drink). SSB intake was measured using two questions. Covariates included age, sex, race/ethnicity, education, and smoking. Obesity, based on self-reported height and weight, was assessed as an effect modifier. Results Overall, 9.1% of adults reported current asthma: 8.5% of adults who did not consume SSBs had current asthma vs 12.1% of adults who consumed SSBs ≥2 times/day. There was no difference in asthma prevalence with SSB intake <1 time/day (8.7%) or once/day (8.7%). Among non-obese adults, the odds of having current asthma were higher among those who consumed SSBs ≥2 times/day (aOR=1.66, 95%CI=1.39, 1.99) than non-SSB consumers. However, SSB intake frequency was not associated with asthma among obese adults. Conclusions Frequent SSB consumption was associated with asthma among non-obese adults. Research on asthma prevention should further consider the potential adverse effects of high SSB intake among U.S. adults. PMID:27496394

Electrostatic spraying of antimicrobial coating to improve strawberry quality

USDA-ARS?s Scientific Manuscript database

The increasing consumer demand for fresh, safe, and high-quality strawberry fruits has lately gained interest on the development of new post-harvest methods to prolong their shelf-life and, at the same time, ensure safety and maintain nutritional and sensory quality. Strawberries are perishable frui...

Consumer Decision Rules and Residential Finance.

ERIC Educational Resources Information Center

Brandt, Jeanette A.; Jaffe, Austin J.

1979-01-01

As guidelines for residential financing, the authors compare different approaches to understanding and figuring the costs of home ownership: the relation of income to house price and housing costs, interest rate, and mortgage term. Instead of the traditional method, they recommend the time value of money approach. (MF)

Quiet Quincy Quarter. Teacher's Guide [and] Student Materials.

ERIC Educational Resources Information Center

Zishka, Phyllis

This document suggests learning activities, teaching methods, objectives, and evaluation measures for a second grade consumer education unit on quarters. The unit, which requires approximately six hours of class time, reinforces basic social studies and mathematics skills including following sequences of numbers, distinguishing left from right,…

Current Status of Diversity Initiatives in Selected Multinational Corporations.

ERIC Educational Resources Information Center

Wentling, Rose Mary; Palma-Rivas, Nilda

2000-01-01

Interviews with eight diversity managers in multinational corporations revealed a variety of domestic and international diversity initiatives, especially in leadership and management. Formal and informal methods were used to plan them. Business unit managers were responsible for implementation. Evaluation was difficult and time consuming. (SK)

Dynamic identification of growth and survival kinetic parameters of microorganisms in foods

USDA-ARS?s Scientific Manuscript database

Inverse analysis is a mathematical method used in predictive microbiology to determine the kinetic parameters of microbial growth and survival in foods. The traditional approach in inverse analysis relies on isothermal experiments that are time-consuming and labor-intensive, and errors are accumula...

Prediction of crude protein and oil content of soybeans using Raman spectroscopy

USDA-ARS?s Scientific Manuscript database

While conventional chemical analysis methods for food nutrients require time-consuming, labor-intensive, and invasive pretreatment procedures, Raman spectroscopy can be used to measure a variety of food components rapidly and non-destructively and does not require supervision from experts. The purpo...

78 FR 5780 - Agency Information Collection Activities: Proposed Collection, Comment Request: Generic Clearance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-28

... could change significantly based on the collection method ultimately used in the research. Estimated..., Comment Request: Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery... qualitative consumer and stakeholder feedback in an efficient, timely manner to facilitate service delivery...

Qualitative and quantitative analysis of lignocellulosic biomass using infrared techniques: A mini-review

USDA-ARS?s Scientific Manuscript database

Current wet chemical methods for biomass composition analysis using two-step sulfuric acid hydrolysis are time-consuming, labor-intensive, and unable to provide structural information about biomass. Infrared techniques provide fast, low-cost analysis, are non-destructive, and have shown promising re...

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2013 CFR

2013-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... time of consummation. The threshold amount in effect during a particular time period is the amount...

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2014 CFR

2014-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... time of consummation. The threshold amount in effect during a particular time period is the amount...

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2012 CFR

2012-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... time of consummation. The threshold amount in effect during a particular time period is the amount...

Impact of changing consumer lifestyles on the emergence/reemergence of foodborne pathogens.

PubMed Central

Collins, J. E.

1997-01-01

Foodborne illness of microbial origin is the most serious food safety problem in the United States. The Centers for Disease Control and Prevention reports that 79% of outbreaks between 1987 and 1992 were bacterial; improper holding temperature and poor personal hygiene of food handlers contributed most to disease incidence. Some microbes have demonstrated resistance to standard methods of preparation and storage of foods. Nonetheless, food safety and public health officials attribute a rise in incidence of foodborne illness to changes in demographics and consumer lifestyles that affect the way food is prepared and stored. Food editors report that fewer than 50% of consumers are concerned about food safety. An American Meat Institute (1996) study details lifestyle changes affecting food behavior, including an increasing number of women in the workforce, limited commitment to food preparation, and a greater number of single heads of households. Consumers appear to be more interested in convenience and saving time than in proper food handling and preparation. PMID:9366599

Analysis of the essential oils of Alpiniae Officinarum Hance in different extraction methods

NASA Astrophysics Data System (ADS)

Yuan, Y.; Lin, L. J.; Huang, X. B.; Li, J. H.

2017-09-01

It was developed for the analysis of the essential oils of Alpiniae Officinarum Hance extracted by steam distillation (SD), ultrasonic assisted solvent extraction (UAE) and supercritical fluid extraction (SFE) via gas chromatography mass spectrometry (GC-MS) combined with retention index (RI) method. There were multiple volatile components of the oils extracted by the three above-mention methods respectively identified; meanwhile, each one was quantified by area normalization method. The results indicated that the content of 1,8-Cineole, the index constituent, by SD was similar as SFE, and higher than UAE. Although UAE was less time consuming and consumed less energy, the oil quality was poorer due to the use of organic solvents was hard to degrade. In addition, some constituents could be obtained by SFE but could not by SD. In conclusion, essential oil of different extraction methods from the same batch of materials had been proved broadly similarly, however, there were some differences in composition and component ratio. Therefore, development and utilization of different extraction methods must be selected according to the functional requirements of products.

12 CFR Supplement I to Part 1005 - Official Interpretations

Code of Federal Regulations, 2013 CFR

2013-01-01

... used to capture the Magnetic Ink Character Recognition (MICR) encoding to initiate a one-time automated clearinghouse (ACH) debit. For example, if a consumer authorizes a one-time ACH debit from the consumer's... involved at the time of the transaction, if the consumer's asset account is subsequently debited for the...

12 CFR Supplement I to Part 1005 - Official Interpretations

Code of Federal Regulations, 2012 CFR

2012-01-01

... used to capture the Magnetic Ink Character Recognition (MICR) encoding to initiate a one-time automated clearinghouse (ACH) debit. For example, if a consumer authorizes a one-time ACH debit from the consumer's... involved at the time of the transaction, if the consumer's asset account is subsequently debited for the...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 1005.3 - Coverage.

Code of Federal Regulations, 2014 CFR

2014-01-01

...-time electronic fund transfer from a consumer's account. The consumer must authorize the transfer. (ii... one-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR... transfer. A consumer authorizes a one-time electronic fund transfer from his or her account to pay the fee...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2011 CFR

2011-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

12 CFR 205.3 - Coverage.

Code of Federal Regulations, 2013 CFR

2013-01-01

... to initiate a one-time electronic fund transfer from a consumer's account. The consumer must...-time electronic fund transfer (in providing a check to a merchant or other payee for the MICR encoding... information for the transfer shall also provide a notice to the consumer at the same time it provides the...

Adaptive sigmoid function bihistogram equalization for image contrast enhancement

NASA Astrophysics Data System (ADS)

Arriaga-Garcia, Edgar F.; Sanchez-Yanez, Raul E.; Ruiz-Pinales, Jose; Garcia-Hernandez, Ma. de Guadalupe

2015-09-01

Contrast enhancement plays a key role in a wide range of applications including consumer electronic applications, such as video surveillance, digital cameras, and televisions. The main goal of contrast enhancement is to increase the quality of images. However, most state-of-the-art methods induce different types of distortion such as intensity shift, wash-out, noise, intensity burn-out, and intensity saturation. In addition, in consumer electronics, simple and fast methods are required in order to be implemented in real time. A bihistogram equalization method based on adaptive sigmoid functions is proposed. It consists of splitting the image histogram into two parts that are equalized independently by using adaptive sigmoid functions. In order to preserve the mean brightness of the input image, the parameter of the sigmoid functions is chosen to minimize the absolute mean brightness metric. Experiments on the Berkeley database have shown that the proposed method improves the quality of images and preserves their mean brightness. An application to improve the colorfulness of images is also presented.

Genetics-based methods for detection of Salmonella spp. in foods.

PubMed

Mozola, Mark A

2006-01-01

Genetic methods are now at the forefront of foodborne pathogen testing. The sensitivity, specificity, and inclusivity advantages offered by deoxyribonucleic acid (DNA) probe technology have driven an intense effort in methods development over the past 20 years. DNA probe-based methods for Salmonella spp. and other pathogens have progressed from time-consuming procedures involving the use of radioisotopes to simple, high throughput, automated assays. The analytical sensitivity of nucleic acid amplification technology has facilitated a reduction in analysis time by allowing enriched samples to be tested for previously undetectable quantities of analyte. This article will trace the evolution of the development of genetic methods for detection of Salmonella in foods, review the basic assay formats and their advantages and limitations, and discuss method performance characteristics and considerations for selection of methods.

16 CFR 313.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Form of opt out notice to consumers; opt out... OF CONGRESS PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 313.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to...

16 CFR 313.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Form of opt out notice to consumers; opt out... OF CONGRESS PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 313.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to...

16 CFR 313.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Form of opt out notice to consumers; opt out... OF CONGRESS PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 313.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to...

16 CFR 313.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 1 2012-01-01 2012-01-01 false Form of opt out notice to consumers; opt out... OF CONGRESS PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 313.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to...

Critical product features' identification using an opinion analyzer.

PubMed

Shamim, Azra; Balakrishnan, Vimala; Tahir, Muhammad; Shiraz, Muhammad

2014-01-01

The increasing use and ubiquity of the Internet facilitate dissemination of word-of-mouth through blogs, online forums, newsgroups, and consumer's reviews. Online consumer's reviews present tremendous opportunities and challenges for consumers and marketers. One of the challenges is to develop interactive marketing practices for making connections with target consumers that capitalize consumer-to-consumer communications for generating product adoption. Opinion mining is employed in marketing to help consumers and enterprises in the analysis of online consumers' reviews by highlighting the strengths and weaknesses of the products. This paper describes an opinion mining system based on novel review and feature ranking methods to empower consumers and enterprises for identifying critical product features from enormous consumers' reviews. Consumers and business analysts are the main target group for the proposed system who want to explore consumers' feedback for determining purchase decisions and enterprise strategies. We evaluate the proposed system on real dataset. Results show that integration of review and feature-ranking methods improves the decision making processes significantly.

Critical Product Features' Identification Using an Opinion Analyzer

PubMed Central

Shamim, Azra; Balakrishnan, Vimala

2014-01-01

The increasing use and ubiquity of the Internet facilitate dissemination of word-of-mouth through blogs, online forums, newsgroups, and consumer's reviews. Online consumer's reviews present tremendous opportunities and challenges for consumers and marketers. One of the challenges is to develop interactive marketing practices for making connections with target consumers that capitalize consumer-to-consumer communications for generating product adoption. Opinion mining is employed in marketing to help consumers and enterprises in the analysis of online consumers' reviews by highlighting the strengths and weaknesses of the products. This paper describes an opinion mining system based on novel review and feature ranking methods to empower consumers and enterprises for identifying critical product features from enormous consumers' reviews. Consumers and business analysts are the main target group for the proposed system who want to explore consumers' feedback for determining purchase decisions and enterprise strategies. We evaluate the proposed system on real dataset. Results show that integration of review and feature-ranking methods improves the decision making processes significantly. PMID:25506612

An intelligent detection method for high-field asymmetric waveform ion mobility spectrometry.

PubMed

Li, Yue; Yu, Jianwen; Ruan, Zhiming; Chen, Chilai; Chen, Ran; Wang, Han; Liu, Youjiang; Wang, Xiaozhi; Li, Shan

2018-04-01

In conventional high-field asymmetric waveform ion mobility spectrometry signal acquisition, multi-cycle detection is time consuming and limits somewhat the technique's scope for rapid field detection. In this study, a novel intelligent detection approach has been developed in which a threshold was set on the relative error of α parameters, which can eliminate unnecessary time spent on detection. In this method, two full-spectrum scans were made in advance to obtain the estimated compensation voltage at different dispersion voltages, resulting in a narrowing down of the whole scan area to just the peak area(s) of interest. This intelligent detection method can reduce the detection time to 5-10% of that of the original full-spectrum scan in a single cycle.

Scattering of targets over layered half space using a semi-analytic method in conjunction with FDTD algorithm.

PubMed

Cao, Le; Wei, Bing

2014-08-25

Finite-difference time-domain (FDTD) algorithm with a new method of plane wave excitation is used to investigate the RCS (Radar Cross Section) characteristics of targets over layered half space. Compare with the traditional excitation plane wave method, the calculation memory and time requirement is greatly decreased. The FDTD calculation is performed with a plane wave incidence, and the RCS of far field is obtained by extrapolating the currently calculated data on the output boundary. However, methods available for extrapolating have to evaluate the half space Green function. In this paper, a new method which avoids using the complex and time-consuming half space Green function is proposed. Numerical results show that this method is in good agreement with classic algorithm and it can be used in the fast calculation of scattering and radiation of targets over layered half space.

16 CFR 1000.29 - Directorate for Engineering Sciences.

Code of Federal Regulations, 2010 CFR

2010-01-01

... standards, product safety tests and test methods, performance criteria, design specifications, and quality control standards for consumer products, based on engineering and scientific methods. It conducts... consumer interest groups. The Directorate conducts human factors studies and research of consumer product...

16 CFR 1000.29 - Directorate for Engineering Sciences.

Code of Federal Regulations, 2012 CFR

2012-01-01

... standards, product safety tests and test methods, performance criteria, design specifications, and quality control standards for consumer products, based on engineering and scientific methods. It conducts... consumer interest groups. The Directorate conducts human factors studies and research of consumer product...

Fungicide residue identification and discrimination using a conducting polymer electronic-nose

Treesearch

Alphus D. Wilson

2013-01-01

The identification of fungicide residues on crop foliage is necessary to make periodic pest management decisions. The determination of fungicide residue identities currently is difficult and time consuming using conventional chemical analysis methods such as gas chromatography-mass spectroscopy. Different fungicide types produce unique electronic aroma signature...

Label-Free Detection and Serotyping of Salmonellae by Surface Enhanced Raman Spectroscopy with Immunomagnetic Separation

USDA-ARS?s Scientific Manuscript database

Salmonella spp. are one of the leading causes of foodborne outbreaks in the United States and globally. Current detection and characterization techniques for Salmonella are time consuming and rapid methods could greatly benefit outbreak investigation, new case prevention and disease treatment. In th...

Silt fences: An economical technique for measuring hillslope soil erosion

Treesearch

Peter R. Robichaud; Robert E. Brown

2002-01-01

Measuring hillslope erosion has historically been a costly, time-consuming practice. An easy to install low-cost technique using silt fences (geotextile fabric) and tipping bucket rain gauges to measure onsite hillslope erosion was developed and tested. Equipment requirements, installation procedures, statistical design, and analysis methods for measuring hillslope...

Non-destructive detection and quantification of blueberry bruising using near-infrared (NIR) hyperspectral reflectance imaging

USDA-ARS?s Scientific Manuscript database

Currently, blueberry bruising is evaluated by either human visual/tactile inspection or firmness measurement instruments. These methods are destructive and time-consuming. The goal of this paper was to develop a non-destructive approach for blueberry bruising detection and quantification. The spe...

Bi-fluorescence imaging for estimating accurately the nuclear condition of Rhizoctonia spp.

USDA-ARS?s Scientific Manuscript database

Aims: To simplify the determination of the nuclear condition of the pathogenic Rhizoctonia, which currently needs to be performed either using two fluorescent dyes, thus is more costly and time-consuming, or using only one fluorescent dye, and thus less accurate. Methods and Results: A red primary ...

Field testing a mobile inelastic neutron scattering system to measure soil carbon

USDA-ARS?s Scientific Manuscript database

Cropping history in conjunction with soil management practices can have a major impact on the amount of organic carbon (C) stored in soil. Current methods of assessing soil C based on soil coring and subsequent processing procedures prior to laboratory analysis are labor intensive and time consuming...

Evaluation of PLS, LS-SVM, and LWR for quantitative spectroscopic analysis of soils

USDA-ARS?s Scientific Manuscript database

Soil testing requires the analysis of large numbers of samples in laboratory that are often time consuming and expensive. Mid-infrared spectroscopy (mid-IR) and near-infrared spectroscopy (NIRS) are fast, non-destructive, and inexpensive analytical methods that have been used for soil analysis, in l...

Insurance: Teacher's Guide. IIC.

ERIC Educational Resources Information Center

University of the South Pacific, Suva (Fiji).

The document presents a guide for teaching insurance protection based on the needs of students in the South Pacific. It is presented as a unit of study within the area of consumer education. Suggestions for unit objectives, student activities, time allocation, teaching methods, and reference materials are offered. A lesson plan is outlined based…

Using a novel flood prediction model and GIS automation to measure the valley and channel morphology of large river networks

EPA Science Inventory

Traditional methods for measuring river valley and channel morphology require intensive ground-based surveys which are often expensive, time consuming, and logistically difficult to implement. The number of surveys required to assess the hydrogeomorphic structure of large river n...

Leasing versus Borrowing: Evaluating Alternative Forms of Consumer Credit.

ERIC Educational Resources Information Center

Nunnally, Bennie H., Jr.; Plath, D. Anthony

1989-01-01

Presents a straightforward method for evaluating lease versus borrow (buy) decisions illustrated with actual financing cost data reported to new car purchasers. States that individuals should consider after-tax cash flows associated with alternative arrangements, time in which cash flow occurs, and opportunity cost of capital to identify the least…

Relationship between population estimates of cotton fleahoppers (Hemiptera: Miridae) obtained by terminal and whole plant examinations

USDA-ARS?s Scientific Manuscript database

The standard sampling technique used to quantify cotton fleahopper, Pseudatomoscelis seriatus (Reuter), abundance in cotton, Gossypium hirsutum L., involves direct counts of adults and nymphs on plants. This method, however, becomes increasingly laborious and time consuming as plants increase in si...

Development of hyperspectral imaging technique for salmonella enteritidis and typhimurium on agar plates

USDA-ARS?s Scientific Manuscript database

Salmonella is a common cause of foodborne disease resulting from the consumption of contaminated food products. Although a direct plating method is widely used for presumptive positive screening of pathogenic Salmonella colonies on agar plates, it is labor-intensive, time-consuming and also prone to...

Microwave moisture measurement of cotton fiber moisture content in the laboratory

USDA-ARS?s Scientific Manuscript database

The moisture content of cotton fiber is an important fiber property, but it is often measured by a laborious, time-consuming laboratory oven drying method. A program was implemented to establish the capabilities of a laboratory microwave moisture measurement instrument to perform rapid, precise and...

Using One Evaluation to Affect Many

ERIC Educational Resources Information Center

Ong, Angelina; Cadenhead, Christina

2015-01-01

Although visitor studies has gained in popularity in the museum field over the past decade, staff members in many institutions still believe that evaluation is a time-consuming, often complex practice that requires considerable resources and expertise. Over the past few years, evaluation professionals have begun developing innovative methods to…

RAPID PCR-BASED MONITORING OF INFECTIOUS ENTEROVIRUSES IN DRINKING WATER. (R824756)

EPA Science Inventory

Abstract

Currently, the standard method for the detection of enteroviruses and hepatitis A virus in water involves cell culture assay which is expensive and time consuming. Direct RT-PCR offers a rapid and sensitive alternative to virus detection but sensitivity is oft...

Development of a 96-well plate iodine binding assay for amylose content determination

USDA-ARS?s Scientific Manuscript database

Cereal starch amylose/amylopectin (AM/AP) ratios are critical in functional properties for food and industrial applications. Conventional methods for the determination of AM/AP of cereal starches are very time consuming and labor intensive making it very difficult to screen large sample sets. Stud...

Simultaneous detection and serotyping of Salmonellae by immunomagnetic separation and label-free surface enhanced Raman spectroscopy

USDA-ARS?s Scientific Manuscript database

Salmonella spp. are one of the leading causes of foodborne outbreaks in the United States and globally. Current detection and characterization techniques for Salmonellae are time consuming and costly, and rapid methods could greatly benefit outbreak investigation, new case prevention and disease tre...

Automatic detection of health changes using statistical process control techniques on measured transfer times of elderly.

PubMed

Baldewijns, Greet; Luca, Stijn; Nagels, William; Vanrumste, Bart; Croonenborghs, Tom

2015-01-01

It has been shown that gait speed and transfer times are good measures of functional ability in elderly. However, data currently acquired by systems that measure either gait speed or transfer times in the homes of elderly people require manual reviewing by healthcare workers. This reviewing process is time-consuming. To alleviate this burden, this paper proposes the use of statistical process control methods to automatically detect both positive and negative changes in transfer times. Three SPC techniques: tabular CUSUM, standardized CUSUM and EWMA, known for their ability to detect small shifts in the data, are evaluated on simulated transfer times. This analysis shows that EWMA is the best-suited method with a detection accuracy of 82% and an average detection time of 9.64 days.

A novel minimum cost maximum power algorithm for future smart home energy management.

PubMed

Singaravelan, A; Kowsalya, M

2017-11-01

With the latest development of smart grid technology, the energy management system can be efficiently implemented at consumer premises. In this paper, an energy management system with wireless communication and smart meter are designed for scheduling the electric home appliances efficiently with an aim of reducing the cost and peak demand. For an efficient scheduling scheme, the appliances are classified into two types: uninterruptible and interruptible appliances. The problem formulation was constructed based on the practical constraints that make the proposed algorithm cope up with the real-time situation. The formulated problem was identified as Mixed Integer Linear Programming (MILP) problem, so this problem was solved by a step-wise approach. This paper proposes a novel Minimum Cost Maximum Power (MCMP) algorithm to solve the formulated problem. The proposed algorithm was simulated with input data available in the existing method. For validating the proposed MCMP algorithm, results were compared with the existing method. The compared results prove that the proposed algorithm efficiently reduces the consumer electricity consumption cost and peak demand to optimum level with 100% task completion without sacrificing the consumer comfort.

The Selection and Placement Method of Materialized Views on Big Data Platform of Equipment Condition Assessment

NASA Astrophysics Data System (ADS)

Ma, Yan; Yao, Jinxia; Gu, Chao; Chen, Yufeng; Yang, Yi; Zou, Lida

2017-05-01

With the formation of electric big data environment, more and more big data analyses emerge. In the complicated data analysis on equipment condition assessment, there exist many join operations, which are time-consuming. In order to save time, the approach of materialized view is usually used. It places part of common and critical join results on external storage and avoids the frequent join operation. In the paper we propose the methods of selecting and placing materialized views to reduce the query time of electric transmission and transformation equipment, and make the profits of service providers maximal. In selection method we design a computation way for the value of non-leaf node based on MVPP structure chart. In placement method we use relevance weights to place the selected materialized views, which help reduce the network transmission time. Our experiments show that the proposed selection and placement methods have a high throughput and good optimization ability of query time for electric transmission and transformation equipment.

Saving time and energy with oversubscription and semi-direct Møller-Plesset second order perturbation methods.

PubMed

Fought, Ellie L; Sundriyal, Vaibhav; Sosonkina, Masha; Windus, Theresa L

2017-04-30

In this work, the effect of oversubscription is evaluated, via calling 2n, 3n, or 4n processes for n physical cores, on semi-direct MP2 energy and gradient calculations and RI-MP2 energy calculations with the cc-pVTZ basis using NWChem. Results indicate that on both Intel and AMD platforms, oversubscription reduces total time to solution on average for semi-direct MP2 energy calculations by 25-45% and reduces total energy consumed by the CPU and DRAM on average by 10-15% on the Intel platform. Semi-direct gradient time to solution is shortened on average by 8-15% and energy consumption is decreased by 5-10%. Linear regression analysis shows a strong correlation between time to solution and total energy consumed. Oversubscribing during RI-MP2 calculations results in performance degradations of 30-50% at the 4n level. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Effective Desynchronization by Nonlinear Delayed Feedback

NASA Astrophysics Data System (ADS)

Popovych, Oleksandr V.; Hauptmann, Christian; Tass, Peter A.

2005-04-01

We show that nonlinear delayed feedback opens up novel means for the control of synchronization. In particular, we propose a demand-controlled method for powerful desynchronization, which does not require any time-consuming calibration. Our technique distinguishes itself by its robustness against variations of system parameters, even in strongly coupled ensembles of oscillators. We suggest our method for mild and effective deep brain stimulation in neurological diseases characterized by pathological cerebral synchronization.

Real-time specific surface area measurements via laser-induced breakdown spectroscopy

USGS Publications Warehouse

Washburn, Kathryn E.; Birdwell, Justin E.; Howard, James E.

2017-01-01

From healthcare to cosmetics to environmental science, the specific surface area (SSA) of micro- and mesoporous materials or products can greatly affect their chemical and physical properties. SSA results are also widely used to examine source rocks in conventional and unconventional petroleum resource plays. Despite its importance, current methods to measure SSA are often cumbersome, time-consuming, or require cryogenic consumables (e.g., liquid nitrogen). These methods are not amenable to high-throughput environments, have stringent sample preparation requirements, and are not practical for use in the field. We present a new application of laser-induced breakdown spectroscopy for rapid measurement of SSA. This study evaluates geological samples, specifically organic-rich oil shales, but the approach is expected to be applicable to many other types of materials. The method uses optical emission spectroscopy to examine laser-generated plasma and quantify the amount of argon adsorbed to a sample during an inert gas purge. The technique can accommodate a wide range of sample sizes and geometries and has the potential for field use. These advantages for SSA measurement combined with the simultaneous acquisition of composition information make this a promising new approach for characterizing geologic samples and other materials.

An Ensemble Method for Spelling Correction in Consumer Health Questions

PubMed Central

Kilicoglu, Halil; Fiszman, Marcelo; Roberts, Kirk; Demner-Fushman, Dina

2015-01-01

Orthographic and grammatical errors are a common feature of informal texts written by lay people. Health-related questions asked by consumers are a case in point. Automatic interpretation of consumer health questions is hampered by such errors. In this paper, we propose a method that combines techniques based on edit distance and frequency counts with a contextual similarity-based method for detecting and correcting orthographic errors, including misspellings, word breaks, and punctuation errors. We evaluate our method on a set of spell-corrected questions extracted from the NLM collection of consumer health questions. Our method achieves a F1 score of 0.61, compared to an informed baseline of 0.29, achieved using ESpell, a spelling correction system developed for biomedical queries. Our results show that orthographic similarity is most relevant in spelling error correction in consumer health questions and that frequency and contextual information are complementary to orthographic features. PMID:26958208

Rapid Material Appearance Acquisition Using Consumer Hardware

PubMed Central

Filip, Jiří; Vávra, Radomír; Krupička, Mikuláš

2014-01-01

A photo-realistic representation of material appearance can be achieved by means of bidirectional texture function (BTF) capturing a material’s appearance for varying illumination, viewing directions, and spatial pixel coordinates. BTF captures many non-local effects in material structure such as inter-reflections, occlusions, shadowing, or scattering. The acquisition of BTF data is usually time and resource-intensive due to the high dimensionality of BTF data. This results in expensive, complex measurement setups and/or excessively long measurement times. We propose an approximate BTF acquisition setup based on a simple, affordable mechanical gantry containing a consumer camera and two LED lights. It captures a very limited subset of material surface images by shooting several video sequences. A psychophysical study comparing captured and reconstructed data with the reference BTFs of seven tested materials revealed that results of our method show a promising visual quality. Speed of the setup has been demonstrated on measurement of human skin and measurement and modeling of a glue dessication time-varying process. As it allows for fast, inexpensive, acquisition of approximate BTFs, this method can be beneficial to visualization applications demanding less accuracy, where BTF utilization has previously been limited. PMID:25340451

Postreinforcement Pause in Grocery Shopping: Comparing Interpurchase Times across Products and Consumers

ERIC Educational Resources Information Center

Oliveira-Castro, Jorge M.; James, Victoria K.; Foxall, Gordon R.

2007-01-01

Purchase probability as a function of interpurchase time was examined through comparison of findings from laboratory experiments on reinforcement schedules and from marketing investigations of consumers' interpurchase time. Panel data, based on a sample of 80 consumers who purchased nine supermarket food products during 16 weeks, were used. For…

Can cover data be used as a surrogate for seedling counts in regeneration stocking evaluations in northern hardwood forests?

Treesearch

Todd E. Ristau; Susan L. Stout

2014-01-01

Assessment of regeneration can be time-consuming and costly. Often, foresters look for ways to minimize the cost of doing inventories. One potential method to reduce time required on a plot is use of percent cover data rather than seedling count data to determine stocking. Robust linear regression analysis was used in this report to predict seedling count data from...

Missing the Mark: Is ICS Training Achieving Its Goal

DTIC Science & Technology

2016-12-01

method achieves learning and actually gives students new knowledge, skills, and 281 Ibid. 282 Ibid...designed to be five days (40 hours) long.331 The class assumes that the student already has a general understanding of ICS and completion of at least...35–37. 64 The entire process is time consuming, as the student must complete the in- class time (as required for the specific class ) and

Frequency of consuming foods predicts changes in cravings for those foods during weight loss: The POUNDS Lost Study

PubMed Central

Apolzan, John W.; Myers, Candice A.; Champagne, Catherine M.; Beyl, Robbie A.; Raynor, Hollie A.; Anton, Stephen A.; Williamson, Donald A.; Sacks, Frank M.; Bray, George A.; Martin, Corby K.

2017-01-01

Objective Food cravings are thought to be the result of conditioning or pairing hunger with consumption of certain foods. Methods In a two-year weight loss trial, subjects were randomized to one of four diets that varied in macronutrient content. The Food Craving Inventory (FCI) was used to measure cravings at baseline, 6, and 24 months. Also, food intake was measured at those time points. To measure free-living consumption of food items measured in the FCI, items on the FCI were matched to the foods consumed from the food intake assessments. Secondarily, we analyzed the amount of food consumed on food intake assessments from foods on the FCI. Results 367 subjects who were overweight and obese were included. There was an association between change from baseline FCI item consumption and change in cravings at months 6 (p<0.001) and 24 (p<0.05). There was no association between change from baseline amount of energy consumed per FCI item and change in cravings. Conclusions Altering frequency of consuming craved foods is positively associated with cravings; however, changing the amount of foods consumed does not appear to alter cravings. These results support the conditioning model of food cravings and provide guidance on how to reduce food cravings. PMID:28618170

12 CFR 573.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 6 2013-01-01 2012-01-01 true Form of opt out notice to consumers; opt out... PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 573.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to provide an opt out notice...

12 CFR 716.7 - Form of opt out notice to consumers and opt out methods.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 7 2012-01-01 2012-01-01 false Form of opt out notice to consumers and opt out... CREDIT UNIONS PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 716.7 Form of opt out notice to consumers and opt out methods. (a)(1) Form of opt out notice. If you are required to...

12 CFR 716.7 - Form of opt out notice to consumers and opt out methods.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 7 2013-01-01 2013-01-01 false Form of opt out notice to consumers and opt out... CREDIT UNIONS PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 716.7 Form of opt out notice to consumers and opt out methods. (a)(1) Form of opt out notice. If you are required to...

12 CFR 573.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 6 2014-01-01 2012-01-01 true Form of opt out notice to consumers; opt out... PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 573.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to provide an opt out notice...

12 CFR 573.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 6 2012-01-01 2012-01-01 false Form of opt out notice to consumers; opt out... PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 573.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to provide an opt out notice...

12 CFR 40.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Form of opt out notice to consumers; opt out... PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 40.7 Form of opt out notice to consumers; opt out methods. (a) (1) Form of opt out notice. If a bank is required to provide an opt out...

12 CFR 573.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 5 2011-01-01 2011-01-01 false Form of opt out notice to consumers; opt out... PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 573.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to provide an opt out notice...

12 CFR 40.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Form of opt out notice to consumers; opt out... PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 40.7 Form of opt out notice to consumers; opt out methods. (a) (1) Form of opt out notice. If a bank is required to provide an opt out...

12 CFR 716.7 - Form of opt out notice to consumers and opt out methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 6 2011-01-01 2011-01-01 false Form of opt out notice to consumers and opt out... CREDIT UNIONS PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 716.7 Form of opt out notice to consumers and opt out methods. (a)(1) Form of opt out notice. If you are required to...

Economic hardship and suicide mortality in Finland, 1875-2010.

PubMed

Korhonen, Marko; Puhakka, Mikko; Viren, Matti

2016-03-01

We investigate the determinants of suicide in Finland using annual data for consumption and suicides from 1860 to 2010. Instead of using some ad hoc measures of cyclical movements of the economy, we build our analysis on a more solid economic theory. A key feature is the habit persistence in preferences, which provides a way to measure individual well-being and predict suicide. We estimate time series of habit levels and develop an indicator (the hardship index) to describe the economic hardship of consumers. The higher the level of the index, the worse off consumers are. As a rational response to such a bad situation, some consumers might commit suicide. We employ the autoregressive distributed lags cointegration method and find that our index works well in explaining the long-term behavior of people committing suicide in Finland.

Large Scale Reduction of Graphite Oxide Project

NASA Technical Reports Server (NTRS)

Calle, Carlos; Mackey, Paul; Falker, John; Zeitlin, Nancy

2015-01-01

This project seeks to develop an optical method to reduce graphite oxide into graphene efficiently and in larger formats than currently available. Current reduction methods are expensive, time-consuming or restricted to small, limited formats. Graphene has potential uses in ultracapacitors, energy storage, solar cells, flexible and light-weight circuits, touch screens, and chemical sensors. In addition, graphite oxide is a sustainable material that can be produced from any form of carbon, making this method environmentally friendly and adaptable for in-situ reduction.

Autocorrelated process control: Geometric Brownian Motion approach versus Box-Jenkins approach

NASA Astrophysics Data System (ADS)

Salleh, R. M.; Zawawi, N. I.; Gan, Z. F.; Nor, M. E.

2018-04-01

Existing of autocorrelation will bring a significant effect on the performance and accuracy of process control if the problem does not handle carefully. When dealing with autocorrelated process, Box-Jenkins method will be preferred because of the popularity. However, the computation of Box-Jenkins method is too complicated and challenging which cause of time-consuming. Therefore, an alternative method which known as Geometric Brownian Motion (GBM) is introduced to monitor the autocorrelated process. One real case of furnace temperature data is conducted to compare the performance of Box-Jenkins and GBM methods in monitoring autocorrelation process. Both methods give the same results in terms of model accuracy and monitoring process control. Yet, GBM is superior compared to Box-Jenkins method due to its simplicity and practically with shorter computational time.

The impact of consumer involvement in research: an evaluation of consumer involvement in the London Primary Care Studies Programme.

PubMed

Wyatt, Katrina; Carter, Mary; Mahtani, Vinita; Barnard, Angela; Hawton, Annie; Britten, Nicky

2008-06-01

The value of consumer involvement in health services research is widely recognized. While there is a growing body of evidence about the principles of good consumer involvement, there is little research about the effect that involvement can have on the research. This evaluation assessed the level and impact of consumer involvement in the London Primary Care Studies Programme (LPCSP), all of whose individual projects had to demonstrate substantial involvement as a condition of funding. To evaluate consumer involvement in the LPSCP and understand what impact consumers had on the research process and outcomes. A multi-method case study approach was undertaken, using survey techniques, interviews, focus groups, observation and scrutiny of written documents. The overall data set comprised 61 questionnaires, 44 semi-structured interviews, 2 focus groups and 15 hours of observation of meetings. Eleven primary care-based research projects which together made up the LPCSP. An in-depth description of consumer involvement in the Programme was produced. Nine projects had consumers as co-applicants, four projects had been completed before the evaluation began and one was still ongoing at the time of the evaluation. Of the eight projects which have produced final reports, all met their aims and objectives. Consumers had had an additional impact in the research, in the initial design of the study, in recruitment of the research subjects, in developing data collection tools, in collecting the data, in analysis and disseminating the findings. Consumer involvement in National Health Service research is a relatively recent policy development and while there is an increasing amount of literature about how and why consumers should be involved in research, there is less evidence about the impact of such involvement. This evaluation provides evidence about the impact that consumers have not only on the research process but also on the outcomes of the research.

Experimental Validation of the Dynamic Inertia Measurement Method to Find the Mass Properties of an Iron Bird Test Article

NASA Technical Reports Server (NTRS)

Chin, Alexander W.; Herrera, Claudia Y.; Spivey, Natalie D.; Fladung, William A.; Cloutier, David

2015-01-01

The mass properties of an aerospace vehicle are required by multiple disciplines in the analysis and prediction of flight behavior. Pendulum oscillation methods have been developed and employed for almost a century as a means to measure mass properties. However, these oscillation methods are costly, time consuming, and risky. The NASA Armstrong Flight Research Center has been investigating the Dynamic Inertia Measurement, or DIM method as a possible alternative to oscillation methods. The DIM method uses ground test techniques that are already applied to aerospace vehicles when conducting modal surveys. Ground vibration tests would require minimal additional instrumentation and time to apply the DIM method. The DIM method has been validated on smaller test articles, but has not yet been fully proven on large aerospace vehicles.

Overview of craft brewing specificities and potentially associated microbiota.

PubMed

Rodhouse, Lindsey; Carbonero, Franck

2017-09-14

The brewing process differs slightly in craft breweries as compared to industrial breweries, as there are fewer control points. This affects the microbiota of the final product. Beer contains several antimicrobial properties that protect it from pathogens, such as low pH, low oxygen and high carbon dioxide content, and the addition of hops. However, these hurdles have limited power controlling spoilage organisms. Contamination by these organisms can originate in the raw materials, persist in the environment, and be introduced by using flavoring ingredients later in the process. Spoilage is a prominent issue in brewing, and can cause quality degradation resulting in consumer rejection and product waste. For example, lactic acid bacteria are predominately associated with producing a ropy texture and haze, along with producing diacetyl which gives the beer butter flavor notes. Other microorganisms may not affect flavor or aroma, but can retard fermentation by consuming nutrients needed by fermentation yeast. Quality control in craft breweries today relies on culturing methods to detect specific spoilage organisms. Using media can be beneficial for detecting the most common beer spoilers, such as Lactobacillus and Pediococci. However, these methods are time consuming with long incubation periods. Molecular methods such as community profiling or high throughput sequencing are better used for identifying entire populations of beer. These methods allow for detection, differentiation, and identification of taxa.

Maintaining Balance: The Increasing Role of Energy Storage for Renewable Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stenclik, Derek; Denholm, Paul; Chalamala, Babu

For nearly a century, global power systems have focused on three key functions: generating, transmitting, and distributing electricity as a real-time commodity. Physics requires that electricity generation always be in real-time balance with load-despite variability in load on time scales ranging from subsecond disturbances to multiyear trends. With the increasing role of variable generation from wind and solar, the retirement of fossil-fuel-based generation, and a changing consumer demand profile, grid operators are using new methods to maintain this balance.

Simplified method for creating a density-absorbed dose calibration curve for the low dose range from Gafchromic EBT3 film.

PubMed

Gotanda, Tatsuhiro; Katsuda, Toshizo; Gotanda, Rumi; Kuwano, Tadao; Akagawa, Takuya; Tanki, Nobuyoshi; Tabuchi, Akihiko; Shimono, Tetsunori; Kawaji, Yasuyuki

2016-01-01

Radiochromic film dosimeters have a disadvantage in comparison with an ionization chamber in that the dosimetry process is time-consuming for creating a density-absorbed dose calibration curve. The purpose of this study was the development of a simplified method of creating a density-absorbed dose calibration curve from radiochromic film within a short time. This simplified method was performed using Gafchromic EBT3 film with a low energy dependence and step-shaped Al filter. The simplified method was compared with the standard method. The density-absorbed dose calibration curves created using the simplified and standard methods exhibited approximately similar straight lines, and the gradients of the density-absorbed dose calibration curves were -32.336 and -33.746, respectively. The simplified method can obtain calibration curves within a much shorter time compared to the standard method. It is considered that the simplified method for EBT3 film offers a more time-efficient means of determining the density-absorbed dose calibration curve within a low absorbed dose range such as the diagnostic range.

Simplified method for creating a density-absorbed dose calibration curve for the low dose range from Gafchromic EBT3 film

PubMed Central

Gotanda, Tatsuhiro; Katsuda, Toshizo; Gotanda, Rumi; Kuwano, Tadao; Akagawa, Takuya; Tanki, Nobuyoshi; Tabuchi, Akihiko; Shimono, Tetsunori; Kawaji, Yasuyuki

2016-01-01

Radiochromic film dosimeters have a disadvantage in comparison with an ionization chamber in that the dosimetry process is time-consuming for creating a density-absorbed dose calibration curve. The purpose of this study was the development of a simplified method of creating a density-absorbed dose calibration curve from radiochromic film within a short time. This simplified method was performed using Gafchromic EBT3 film with a low energy dependence and step-shaped Al filter. The simplified method was compared with the standard method. The density-absorbed dose calibration curves created using the simplified and standard methods exhibited approximately similar straight lines, and the gradients of the density-absorbed dose calibration curves were −32.336 and −33.746, respectively. The simplified method can obtain calibration curves within a much shorter time compared to the standard method. It is considered that the simplified method for EBT3 film offers a more time-efficient means of determining the density-absorbed dose calibration curve within a low absorbed dose range such as the diagnostic range. PMID:28144120

A time-series method for automated measurement of changes in mitotic and interphase duration from time-lapse movies.

PubMed

Sigoillot, Frederic D; Huckins, Jeremy F; Li, Fuhai; Zhou, Xiaobo; Wong, Stephen T C; King, Randall W

2011-01-01

Automated time-lapse microscopy can visualize proliferation of large numbers of individual cells, enabling accurate measurement of the frequency of cell division and the duration of interphase and mitosis. However, extraction of quantitative information by manual inspection of time-lapse movies is too time-consuming to be useful for analysis of large experiments. Here we present an automated time-series approach that can measure changes in the duration of mitosis and interphase in individual cells expressing fluorescent histone 2B. The approach requires analysis of only 2 features, nuclear area and average intensity. Compared to supervised learning approaches, this method reduces processing time and does not require generation of training data sets. We demonstrate that this method is as sensitive as manual analysis in identifying small changes in interphase or mitotic duration induced by drug or siRNA treatment. This approach should facilitate automated analysis of high-throughput time-lapse data sets to identify small molecules or gene products that influence timing of cell division.

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2010 CFR

2010-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... the lease contract, so long as all disclosures are given at the same time. Alternatively, all...

12 CFR Supplement I to Part 213 - Official Staff Commentary to Regulation M

Code of Federal Regulations, 2011 CFR

2011-01-01

... primary use. 2. Period of time. To be a consumer lease, the initial term of the lease must be more than... lease (unless terminable without penalty at any time by the consumer) under which the consumer: i... the lease contract, so long as all disclosures are given at the same time. Alternatively, all...

Time trends and patterns of reported egg consumption in the U.S. by sociodemographic characteristics

USDA-ARS?s Scientific Manuscript database

Objectives: To 1) describe time trends of the percentage of individuals in the U.S that consume eggs, 2) describe time trends of the daily amount of eggs consumed per day, and 3) examine differences in the amount of eggs consumed per day; overall and by gender, age, income, education, race-ethnicit...

Consumer perception and insights on fats and fatty acids: knowledge on the quality of diet fat.

PubMed

Diekman, Connie; Malcolm, Kim

2009-01-01

Research indicates that consumers do not understand dietary fat, either the importance of the quality or the quantity of fats needed for health. Previous consumer surveys suggest the priority placed on fat in various nutrition communications (i.e., low fat or reduction in fats) has contributed to this confusion. This consumer study was carried out in 16 countries in two waves, investigating in total 6,426 subjects. The survey was conducted by phone, internet and face-to-face interviews, depending on the acceptable method for the population. Participants, aged 18-70 years, were the main family shopper. Knowledge about fat is conflicted, including which fats have health benefits; 59% of respondents think fat should be avoided, 65% think a low-fat diet is a healthy diet and 38% claim to avoid foods containing fat. Respondents were aware of different types of fats but did not know which ones were healthier. Omegas have the greatest level of recognition but at the same time many people do not realize they are fats. Around half of consumers do not know whether fats are good or bad, meaning they do not know what to eat. Copyright 2009 S. Karger AG, Basel.

Calorie Labeling, Fast Food Purchasing and Restaurant Visits

PubMed Central

Elbel, Brian; Mijanovich, Tod; Dixon, Beth; Abrams, Courtney; Weitzman, Beth; Kersh, Rogan; Auchincloss, Amy H.; Ogedegbe, Gbenga

2013-01-01

Objective Obesity is a pressing public health problem without proven population-wide solutions. Researchers sought to determine whether a city-mandated policy requiring calorie labeling at fast food restaurants was associated with consumer awareness of labels, calories purchased and fast food restaurant visits. Design and Methods Difference-in-differences design, with data collected from consumers outside fast food restaurants and via a random digit dial telephone survey, before (December 2009) and after (June 2010) labeling in Philadelphia (which implemented mandatory labeling) and Baltimore (matched comparison city). Measures included: self-reported use of calorie information, calories purchased determined via fast food receipts, and self-reported weekly fast-food visits. Results The consumer sample was predominantly Black (71%), and high school educated (62%). Post-labeling, 38% of Philadelphia consumers noticed the calorie labels for a 33 percentage point (p<.001) increase relative to Baltimore. Calories purchased and number of fast food visits did not change in either city over time. Conclusions While some consumer reports noticing and using calorie information, no population level changes were noted in calories purchased or fast food visits. Other controlled studies are needed to examine the longer term impact of labeling as it becomes national law. PMID:24136905

Beef customer satisfaction: factors affecting consumer evaluations of clod steaks.

PubMed

Goodson, K J; Morgan, W W; Reagan, J O; Gwartney, B L; Courington, S M; Wise, J W; Savell, J W

2002-02-01

An in-home beef study evaluated consumer ratings of clod steaks (n = 1,264) as influenced by USDA quality grade (Top Choice, Low Choice, High Select, and Low Select), city (Chicago and Philadelphia), consumer segment (Beef Loyals, who are heavy consumers of beef; Budget Rotators, who are cost-driven and split meat consumption between beef and chicken; and Variety Rotators, who have higher incomes and education and split their meat consumption among beef, poultry, and other foods), degree of doneness, and cooking method. Consumers evaluated each steak for Overall Like, Tenderness, Juiciness, Flavor Like, and Flavor Amount using 10-point scales. Grilling was the predominant cooking method used, and steaks were cooked to medium-well and greater degrees of doneness. Interactions existed involving the consumer-controlled factors of degree of doneness and(or) cooking method for all consumer-evaluated traits for the clod steak (P < 0.05). USDA grade did not affect any consumer evaluation traits or Warner-Bratzler shear force values (P > 0.05). One significant main effect, segment (P = 0.006), and one significant interaction, cooking method x city (P = 0.0407), existed for Overall Like ratings. Consumers in the Beef Loyals segment rated clod steaks higher in Overall Like than the other segments. Consumers in Chicago tended to give more uniform Overall Like ratings to clod steaks cooked by various methods; however, consumers in Philadelphia gave among the highest ratings to clod steaks that were fried and among the lowest to those that were grilled. Additionally, although clod steaks that were fried were given generally high ratings by consumers in Philadelphia, consumers in Chicago rated clod steaks cooked in this manner significantly lower than those in Philadelphia. Conversely, consumers in Chicago rated clod steaks that were grilled significantly higher than consumers in Philadelphia. Correlation and stepwise regression analyses indicated that Flavor Like was driving customer satisfaction of the clod steak. Flavor Like was the sensory trait most highly correlated to Overall Like, followed by Tenderness, Flavor Amount, and Juiciness. Flavor Like was the first variable to enter into the stepwise regression equation for predicting Overall Like, followed by Tenderness and Flavor Amount. For the clod steak, it is likely that preparation techniques that improve flavor without reducing tenderness positively affect customer satisfaction.

Numerical techniques for high-throughput reflectance interference biosensing

NASA Astrophysics Data System (ADS)

Sevenler, Derin; Ünlü, M. Selim

2016-06-01

We have developed a robust and rapid computational method for processing the raw spectral data collected from thin film optical interference biosensors. We have applied this method to Interference Reflectance Imaging Sensor (IRIS) measurements and observed a 10,000 fold improvement in processing time, unlocking a variety of clinical and scientific applications. Interference biosensors have advantages over similar technologies in certain applications, for example highly multiplexed measurements of molecular kinetics. However, processing raw IRIS data into useful measurements has been prohibitively time consuming for high-throughput studies. Here we describe the implementation of a lookup table (LUT) technique that provides accurate results in far less time than naive methods. We also discuss an additional benefit that the LUT method can be used with a wider range of interference layer thickness and experimental configurations that are incompatible with methods that require fitting the spectral response.

A longitudinal model of the dynamics between HMOs' consumer-friendliness and preventive health care utilization.

PubMed

Xiao, Qian; Savage, Grant T; Zhuang, Weiling

2014-01-01

This study aims at replicating and extending Xiao and Savage's (2008) research to understand the multidimensional aspect of HMOs distinguished by HMOs' consumer-friendliness, and their relationship to consumers' preventive care utilization. This study develops a dynamic model to consider both concurrent and time lagging effects of HMOs' consumer-friendliness. Our data analysis discloses similar relationship patterns as revealed by Xiao and Savage. Additionally, our findings reveal the time-series changes of the influence of HMOs' consumer-friendliness that either the effects of early experienced HMOs' consumer-friendliness wear out totally or HMOs' consumer-friendly characteristics on the concurrent term contain most of the explanatory power.

Determination of proline in honey: comparison between official methods, optimization and validation of the analytical methodology.

PubMed

Truzzi, Cristina; Annibaldi, Anna; Illuminati, Silvia; Finale, Carolina; Scarponi, Giuseppe

2014-05-01

The study compares official spectrophotometric methods for the determination of proline content in honey - those of the International Honey Commission (IHC) and the Association of Official Analytical Chemists (AOAC) - with the original Ough method. Results show that the extra time-consuming treatment stages added by the IHC method with respect to the Ough method are pointless. We demonstrate that the AOACs method proves to be the best in terms of accuracy and time saving. The optimized waiting time for the absorbance recording is set at 35min from the removal of reaction tubes from the boiling bath used in the sample treatment. The optimized method was validated in the matrix: linearity up to 1800mgL(-1), limit of detection 20mgL(-1), limit of quantification 61mgL(-1). The method was applied to 43 unifloral honey samples from the Marche region, Italy. Copyright © 2013 Elsevier Ltd. All rights reserved.

Subsampled Hessian Newton Methods for Supervised Learning.

PubMed

Wang, Chien-Chih; Huang, Chun-Heng; Lin, Chih-Jen

2015-08-01

Newton methods can be applied in many supervised learning approaches. However, for large-scale data, the use of the whole Hessian matrix can be time-consuming. Recently, subsampled Newton methods have been proposed to reduce the computational time by using only a subset of data for calculating an approximation of the Hessian matrix. Unfortunately, we find that in some situations, the running speed is worse than the standard Newton method because cheaper but less accurate search directions are used. In this work, we propose some novel techniques to improve the existing subsampled Hessian Newton method. The main idea is to solve a two-dimensional subproblem per iteration to adjust the search direction to better minimize the second-order approximation of the function value. We prove the theoretical convergence of the proposed method. Experiments on logistic regression, linear SVM, maximum entropy, and deep networks indicate that our techniques significantly reduce the running time of the subsampled Hessian Newton method. The resulting algorithm becomes a compelling alternative to the standard Newton method for large-scale data classification.

On the Convenience of Using the Complete Linearization Method in Modelling the BLR of AGN

NASA Astrophysics Data System (ADS)

Patriarchi, P.; Perinotto, M.

The Complete Linearization Method (Mihalas, 1978) consists in the determination of the radiation field (at a set of frequency points), atomic level populations, temperature, electron density etc., by resolving the system of radiative transfer, thermal equilibrium, statistical equilibrium equations simultaneously and self-consistently. Since the system is not linear, it must be solved by iteration after linearization, using a perturbative method, starting from an initial guess solution. Of course the Complete Linearization Method is more time consuming than the previous one. But how great can this disadvantage be in the age of supercomputers? It is possible to approximately evaluate the CPU time needed to run a model by computing the number of multiplications necessary to solve the system.

An approach for automated analysis of particle holograms

NASA Technical Reports Server (NTRS)

Stanton, A. C.; Caulfield, H. J.; Stewart, G. W.

1984-01-01

A simple method for analyzing droplet holograms is proposed that is readily adaptable to automation using modern image digitizers and analyzers for determination of the number, location, and size distributions of spherical or nearly spherical droplets. The method determines these parameters by finding the spatial location of best focus of the droplet images. With this location known, the particle size may be determined by direct measurement of image area in the focal plane. Particle velocity and trajectory may be determined by comparison of image locations at different instants in time. The method is tested by analyzing digitized images from a reconstructed in-line hologram, and the results show that the method is more accurate than a time-consuming plane-by-plane search for sharpest focus.

16 CFR 433.3 - Exemption of sellers taking or receiving open end consumer credit contracts before November 1...

Code of Federal Regulations, 2010 CFR

2010-01-01

... make loans, from time to time, directly from the creditor or indirectly by use of a credit card, check... open end consumer credit contracts before November 1, 1977 from requirements of § 433.2(a). 433.3... CONSUMERS' CLAIMS AND DEFENSES § 433.3 Exemption of sellers taking or receiving open end consumer credit...

77 FR 38305 - Agency Information Collection Activities; Announcement of Office of Management and Budget...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

...; ``Real Time'' Surveys of Consumers' Knowledge, Perceptions and Reported Behavior Concerning Foodborne...' Surveys of Consumers' Knowledge, Perceptions and Reported Behavior Concerning Foodborne Illness Outbreaks... ```Real Time' Surveys of Consumers' Knowledge, Perceptions and Reported Behavior Concerning Foodborne...

Vision based tunnel inspection using non-rigid registration

NASA Astrophysics Data System (ADS)

Badshah, Amir; Ullah, Shan; Shahzad, Danish

2015-04-01

Growing numbers of long tunnels across the globe has increased the need for safety measurements and inspections of tunnels in these days. To avoid serious damages, tunnel inspection is highly recommended at regular intervals of time to find any deformations or cracks at the right time. While following the stringent safety and tunnel accessibility standards, conventional geodetic surveying using techniques of civil engineering and other manual and mechanical methods are time consuming and results in troublesome of routine life. An automatic tunnel inspection by image processing techniques using non rigid registration has been proposed. There are many other image processing methods used for image registration purposes. Most of the processes are operation of images in its spatial domain like finding edges and corners by Harris edge detection method. These methods are quite time consuming and fail for some or other reasons like for blurred or images with noise. Due to use of image features directly by these methods in the process, are known by the group, correlation by image features. The other method is featureless correlation, in which the images are converted into its frequency domain and then correlated with each other. The shift in spatial domain is the same as in frequency domain, but the processing is order faster than in spatial domain. In the proposed method modified normalized phase correlation has been used to find any shift between two images. As pre pre-processing the tunnel images i.e. reference and template are divided into small patches. All these relative patches are registered by the proposed modified normalized phase correlation. By the application of the proposed algorithm we get the pixel movement of the images. And then these pixels shifts are converted to measuring units like mm, cm etc. After the complete process if there is any shift in the tunnel at described points are located.

An efficient hybrid method for stochastic reaction-diffusion biochemical systems with delay

NASA Astrophysics Data System (ADS)

Sayyidmousavi, Alireza; Ilie, Silvana

2017-12-01

Many chemical reactions, such as gene transcription and translation in living cells, need a certain time to finish once they are initiated. Simulating stochastic models of reaction-diffusion systems with delay can be computationally expensive. In the present paper, a novel hybrid algorithm is proposed to accelerate the stochastic simulation of delayed reaction-diffusion systems. The delayed reactions may be of consuming or non-consuming delay type. The algorithm is designed for moderately stiff systems in which the events can be partitioned into slow and fast subsets according to their propensities. The proposed algorithm is applied to three benchmark problems and the results are compared with those of the delayed Inhomogeneous Stochastic Simulation Algorithm. The numerical results show that the new hybrid algorithm achieves considerable speed-up in the run time and very good accuracy.

Improving the sensory quality of flavored liquid milk by engaging sensory analysis and consumer preference.

PubMed

Zhi, Ruicong; Zhao, Lei; Shi, Jingye

2016-07-01

Developing innovative products that satisfy various groups of consumers helps a company maintain a leading market share. The hedonic scale and just-about-right (JAR) scale are 2 popular methods for hedonic assessment and product diagnostics. In this paper, we chose to study flavored liquid milk because it is one of the most necessary nutrient sources in China. The hedonic scale and JAR scale methods were combined to provide directional information for flavored liquid milk optimization. Two methods of analysis (penalty analysis and partial least squares regression on dummy variables) were used and the results were compared. This paper had 2 aims: (1) to investigate consumer preferences of basic flavor attributes of milk from various cities in China; and (2) to determine the improvement direction for specific products and the ideal overall liking for consumers in various cities. The results showed that consumers in China have local-specific requirements for characteristics of flavored liquid milk. Furthermore, we provide a consumer-oriented product design method to improve sensory quality according to the preference of particular consumers. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Polydiacetylene-Based Liposomes: An "Optical Tongue" for Bacteria Detection and Identification

ERIC Educational Resources Information Center

West, Matthew R.; Hanks, Timothy W.; Watson, Rhett T.

2009-01-01

Food- and water-borne bacteria are a major health concern worldwide. Current detection methods are time-consuming and require sophisticated equipment that is not always readily available. However, new techniques based on nanotechnology are under development that will result in a new generation of sensors. In this experiment, liposomes are…

NIR reflectance spectroscopic method for nondestructive moisture content determination of in-shell peanuts

USDA-ARS?s Scientific Manuscript database

Most of the commercial instruments presently available to determine the moisture content (MC) of peanuts need shelling and cleaning of the peanut samples, and in some cases some sort of sample preparation such as grinding. This is cumbersome, time consuming and destructive. It would be useful if t...

NIR Reflectance Spectroscopic Method for Nondestructive Moisture Content Determination of In Peanut Kernels

USDA-ARS?s Scientific Manuscript database

Most of the commercial instruments presently available to determine the moisture content (MC) of peanuts need shelling and cleaning of the peanut samples, and in some cases some sort of sample preparation such as grinding. This is cumbersome, time consuming and destructive. It would be useful if t...

DEVELOPMENT OF VIRAL INTERNAL CONTROLS FOR THE ASSESSMENT OF INHIBITOR REMOVAL FROM ENVIRONMENTAL WATER SAMPLES.

EPA Science Inventory

The presence of human enteric viruses in drinking water is of public health concern. It is therefore important to be able to reliably detect these viruses in contaminating water sources. Cell culture methods are time consuming and also not all enteric viruses can currently be p...

Alternative methods to determine infectivity of Tulane virus: a surrogate for human norovirus

USDA-ARS?s Scientific Manuscript database

Culturable animal caliciviruses are widely-used as surrogates for human norovirus (HuNoV), which can not replicate in cells. The infectivity of a culturable virus was traditionally determined by plaque assay and/or 50% tissue culture infectious dose (TCID50) assay, both of which are time-consuming ...

A Tool for Mapping Research Skills in Undergraduate Curricula

ERIC Educational Resources Information Center

Fraser, Gillian A.; Crook, Anne C.; Park, Julian R.

2007-01-01

There has been considerable interest recently in the teaching of skills to undergraduate students. However, existing methods for collating data on how much, where and when students are taught and assessed skills have often been shown to be time-consuming and ineffective. Here, we outline an electronic research skills audit tool that has been…

What Facilitates and Impedes Collaborative Work during Higher Education Software Implementation Projects?

ERIC Educational Resources Information Center

Cramer, Sharon F.; Tetewsky, Sheldon J.; Marczynski, Kelly S.

2010-01-01

Implementations of new or major upgrades of existing student information systems require incorporation of new paradigms and the exchange of familiar routines for new methods. As a result, implementations are almost always time consuming and expensive. Many people in the field of information technology have identified some of the challenges faced…

Connecting Earth Systems: Developing Holistic Understanding through the Earth-System-Science Model

ERIC Educational Resources Information Center

Gagnon, Valoree; Bradway, Heather

2012-01-01

For many years, Earth science concepts have been taught as thematic units with lessons in nice, neat chapter packages complete with labs and notes. But compartmentalized Earth science no longer exists, and implementing teaching methods that support student development of holistic understandings can be a time-consuming and difficult task. While…

Colorimetric Detection of Water Vapor Using Metal-Organic Framework Composites.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allendorf, Mark D.

Purpose: Water vapor trapped in encapsulation materials or enclosed volumes leads to corrosion issues for critical NW components. Sandia National Laboratories has created a new diagnostic to indicate the presence of water in weapon systems. Impact: Component exposure to water now can be determined instantly, without need for costly, time-consuming analytical methods.

Application of a rising plate meter to estimate forage yield on dairy farms in Pennsylvania

USDA-ARS?s Scientific Manuscript database

Accurately assessing pasture forage yield is necessary for producers who want to budget feed expenses and make informed pasture management decisions. Clipping and weighing forage from a known area is a direct method to measure pasture forage yield, however it is time consuming. The rising plate mete...

A rapid colorimetric assay for mold spore germination using XTT tetrazolium salt

Treesearch

Carol A. Clausen; Vina W. Yang

2011-01-01

Current laboratory test methods to measure efficacy of new mold inhibitors are time consuming, some require specialized test equipment and ratings are subjective. Rapid, simple quantitative assays to measure the efficacy of mold inhibitors are needed. A quantitative, colorimetric microassay was developed using XTT tetrazolium salt to metabolically assess mold spore...

Toward Modeling the Learner's Personality Using Educational Games

ERIC Educational Resources Information Center

Essalmi, Fathi; Tlili, Ahmed; Ben Ayed, Leila Jemni; Jemmi, Mohamed

2017-01-01

Learner modeling is a crucial step in the learning personalization process. It allows taking into consideration the learner's profile to make the learning process more efficient. Most studies refer to an explicit method, namely questionnaire, to model learners. Questionnaires are time consuming and may not be motivating for learners. Thus, this…

The Politics of Co-Production: Risks, Limits and Pollution

ERIC Educational Resources Information Center

Flinders, Matthew; Wood, Matthew; Cunningham, Malaika

2016-01-01

Co-production is a risky method of social inquiry. It is time-consuming, ethically complex, emotionally demanding, inherently unstable, vulnerable to external shocks, subject to competing demands and it challenges many disciplinary norms. This is what makes it so fresh and innovative. And yet these research-related risks are rarely discussed and,…

Automatic Coding of Dialogue Acts in Collaboration Protocols

ERIC Educational Resources Information Center

Erkens, Gijsbert; Janssen, Jeroen

2008-01-01

Although protocol analysis can be an important tool for researchers to investigate the process of collaboration and communication, the use of this method of analysis can be time consuming. Hence, an automatic coding procedure for coding dialogue acts was developed. This procedure helps to determine the communicative function of messages in online…

A Method for Modeling Household Occupant Behavior to Simulate Residential Energy Consumption

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Brandon J; Starke, Michael R; Abdelaziz, Omar

2014-01-01

This paper presents a statistical method for modeling the behavior of household occupants to estimate residential energy consumption. Using data gathered by the U.S. Census Bureau in the American Time Use Survey (ATUS), actions carried out by survey respondents are categorized into ten distinct activities. These activities are defined to correspond to the major energy consuming loads commonly found within the residential sector. Next, time varying minute resolution Markov chain based statistical models of different occupant types are developed. Using these behavioral models, individual occupants are simulated to show how an occupant interacts with the major residential energy consuming loadsmore » throughout the day. From these simulations, the minimum number of occupants, and consequently the minimum number of multiple occupant households, needing to be simulated to produce a statistically accurate representation of aggregate residential behavior can be determined. Finally, future work will involve the use of these occupant models along side residential load models to produce a high-resolution energy consumption profile and estimate the potential for demand response from residential loads.« less

A distributed algorithm for demand-side management: Selling back to the grid.

PubMed

Latifi, Milad; Khalili, Azam; Rastegarnia, Amir; Zandi, Sajad; Bazzi, Wael M

2017-11-01

Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources) back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level.

Consumer preferences and willingness to pay for value-added chicken product attributes.

PubMed

Martínez Michel, Lorelei; Anders, Sven; Wismer, Wendy V

2011-10-01

A growing demand for convenient and ready-to-eat products has increased poultry processors' interest in developing consumer-oriented value-added chicken products. In this study, a conjoint analysis survey of 276 chicken consumers in Edmonton was conducted during the summer of 2009 to assess the importance of the chicken part, production method, processing method, storage method, the presence of added flavor, and cooking method on consumer preferences for different value-added chicken product attributes. Estimates of consumer willingness to pay (WTP) premium prices for different combinations of value-added chicken attributes were also determined. Participants'"ideal" chicken product was a refrigerated product made with free-range chicken breast, produced with no additives or preservatives and no added flavor, which could be oven heated or pan heated. Half of all participants on average were willing to pay 30% more for a value-added chicken product over the price of a conventional product. Overall, young consumers, individuals who shop at Farmers' Markets and those who prefer free-range or organic products were more likely to pay a premium for value-added chicken products. As expected, consumers' WTP was affected negatively by product price. Combined knowledge of consumer product attribute preferences and consumer WTP for value-added chicken products can help the poultry industry design innovative value-added chicken products. Practical Application:  An optimum combination of product attributes desired by consumers for the development of a new value-added chicken product, as well as the WTP for this product, have been identified in this study. This information is relevant to the poultry industry to enhance consumer satisfaction of future value-added chicken products and provide the tools for future profit growth. © 2011 Institute of Food Technologists®

Comparative cost-efficiency of the EVOTECH endoscope cleaner and reprocessor versus manual cleaning plus automated endoscope reprocessing in a real-world Canadian hospital endoscopy setting.

PubMed

Forte, Lindy; Shum, Cynthia

2011-10-03

Reprocessing of endoscopes generally requires labour-intensive manual cleaning followed by high-level disinfection in an automated endoscope reprocessor (AER). EVOTECH Endoscope Cleaner and Reprocessor (ECR) is approved for fully automated cleaning and disinfection whereas AERs require manual cleaning prior to the high-level disinfection procedure. The purpose of this economic evaluation was to determine the cost-efficiency of the ECR versus AER methods of endoscopy reprocessing in an actual practice setting. A time and motion study was conducted at a Canadian hospital to collect data on the personnel resources and consumable supplies costs associated with the use of EVOTECH ECR versus manual cleaning followed by AER with Medivators DSD-201. Reprocessing of all endoscopes was observed and timed for both reprocessor types over three days. Laboratory staff members were interviewed regarding the consumption and cost of all disposable supplies and equipment. Exact Wilcoxon rank sum test was used for assessing differences in total cycle reprocessing time. Endoscope reprocessing was significantly shorter with the ECR than with manual cleaning followed by AER. The differences in median time were 12.46 minutes per colonoscope (p < 0.0001), 6.31 minutes per gastroscope (p < 0.0001), and 5.66 minutes per bronchoscope (p = 0.0040). Almost 2 hours of direct labour time was saved daily with the ECR. The total per cycle cost of consumables and labour for maintenance was slightly higher for EVOTECH ECR versus manual cleaning followed by AER ($8.91 versus $8.31, respectively). Including the cost of direct labour time consumed in reprocessing scopes, the per cycle and annual costs of using the EVOTECH ECR was less than the cost of manual cleaning followed by AER disinfection ($11.50 versus $11.88). The EVOTECH ECR was more efficient and less costly to use for the reprocessing of endoscopes than manual cleaning followed by AER disinfection. Although the cost of consumable supplies required to reprocess endoscopes with EVOTECH ECR was slightly higher, the value of the labour time saved with EVOTECH ECR more than offset the additional consumables cost. The increased efficiency with EVOTECH ECR could lead to even further cost-savings by shifting endoscopy laboratory personnel responsibilities but further study is required.

A Fast-Time Simulation Tool for Analysis of Airport Arrival Traffic

NASA Technical Reports Server (NTRS)

Erzberger, Heinz; Meyn, Larry A.; Neuman, Frank

2004-01-01

The basic objective of arrival sequencing in air traffic control automation is to match traffic demand and airport capacity while minimizing delays. The performance of an automated arrival scheduling system, such as the Traffic Management Advisor developed by NASA for the FAA, can be studied by a fast-time simulation that does not involve running expensive and time-consuming real-time simulations. The fast-time simulation models runway configurations, the characteristics of arrival traffic, deviations from predicted arrival times, as well as the arrival sequencing and scheduling algorithm. This report reviews the development of the fast-time simulation method used originally by NASA in the design of the sequencing and scheduling algorithm for the Traffic Management Advisor. The utility of this method of simulation is demonstrated by examining the effect on delays of altering arrival schedules at a hub airport.

Proportional reasoning as a heuristic-based process: time constraint and dual task considerations.

PubMed

Gillard, Ellen; Van Dooren, Wim; Schaeken, Walter; Verschaffel, Lieven

2009-01-01

The present study interprets the overuse of proportional solution methods from a dual process framework. Dual process theories claim that analytic operations involve time-consuming executive processing, whereas heuristic operations are fast and automatic. In two experiments to test whether proportional reasoning is heuristic-based, the participants solved "proportional" problems, for which proportional solution methods provide correct answers, and "nonproportional" problems known to elicit incorrect answers based on the assumption of proportionality. In Experiment 1, the available solution time was restricted. In Experiment 2, the executive resources were burdened with a secondary task. Both manipulations induced an increase in proportional answers and a decrease in correct answers to nonproportional problems. These results support the hypothesis that the choice for proportional methods is heuristic-based.

Food consumption patterns in the Waterloo Region, Ontario, Canada: a cross-sectional telephone survey

PubMed Central

Nesbitt, Andrea; Majowicz, Shannon; Finley, Rita; Pollari, Frank; Pintar, Katarina; Marshall, Barbara; Cook, Angela; Sargeant, Jan; Wilson, Jeff; Ribble, Carl; Knowles, Lewinda

2008-01-01

Background The demographics and lifestyles of Canadians are changing, thereby influencing food choices and food preparation in the home. Although different dietary practices are associated with increased risk of foodborne illness, our ability to evaluate food consumption trends and assess risks associated with foodborne illness is limited by lack of data on current eating habits and consumer food safety practices. The objective of this study was to describe, for the first time, the food consumption patterns in a Canadian-based population from a food safety perspective, in order to establish baseline data on actual food intake of individuals. Method A cross-sectional telephone survey of 2,332 randomly selected residents of Waterloo Region, Ontario, Canada (C-EnterNet pilot site) was conducted between November 2005 and March 2006. Food intake was assessed using a 7-day dietary recall method. Results Certain food items were consumed more than others among the same food groups, and consumption of many food items varied by gender and age. Specific foods considered high-risk for the transmission of certain enteric pathogens were significantly more likely to be consumed by males (i.e. unpasteurized juice, bean sprouts, and undercooked meat) and elderly individuals (i.e. undercooked eggs). The majority of households prepared and consumed most meals at home, allocating an average of 44 minutes to prepare a meal. Conclusion Baseline data on actual food intake is useful to public health professionals and food safety risk assessors for developing communication messages to consumers and in foodborne outbreak investigations. PMID:18950509

Review: The variability of the eating quality of beef can be reduced by predicting consumer satisfaction.

PubMed

Bonny, S P F; Hocquette, J-F; Pethick, D W; Legrand, I; Wierzbicki, J; Allen, P; Farmer, L J; Polkinghorne, R J; Gardner, G E

2018-04-02

The Meat Standards Australia (MSA) grading scheme has the ability to predict beef eating quality for each 'cut×cooking method combination' from animal and carcass traits such as sex, age, breed, marbling, hot carcass weight and fatness, ageing time, etc. Following MSA testing protocols, a total of 22 different muscles, cooked by four different cooking methods and to three different degrees of doneness, were tasted by over 19 000 consumers from Northern Ireland, Poland, Ireland, France and Australia. Consumers scored the sensory characteristics (tenderness, flavor liking, juiciness and overall liking) and then allocated samples to one of four quality grades: unsatisfactory, good-every-day, better-than-every-day and premium. We observed that 26% of the beef was unsatisfactory. As previously reported, 68% of samples were allocated to the correct quality grades using the MSA grading scheme. Furthermore, only 7% of the beef unsatisfactory to consumers was misclassified as acceptable. Overall, we concluded that an MSA-like grading scheme could be used to predict beef eating quality and hence underpin commercial brands or labels in a number of European countries, and possibly the whole of Europe. In addition, such an eating quality guarantee system may allow the implementation of an MSA genetic index to improve eating quality through genetics as well as through management. Finally, such an eating quality guarantee system is likely to generate economic benefits to be shared along the beef supply chain from farmers to retailors, as consumers are willing to pay more for a better quality product.

Oxalate Content of Different Drinkable Dilutions of Tea Infusions after Different Brewing Times

PubMed Central

Lotfi Yagin, Neda; Mahdavi, Reza; Nikniaz, Zeinab

2012-01-01

Background: The aims of this study were to determine the effect of different brewing times and diluting on oxalate content of loose-packed black teas consumed in Tabriz, Iran. Methods: The oxalate content of black teas after brewing for 5, 10, 15, 30, 60 minutes was measured in triplicate by enzymatic assay. In order to attain the most acceptable dilution of tea infusions, tea samples which were brewed for 15, 30 and 60 minutes were diluted two (120 ml), three (80 ml) and four (60 ml) times respectively. Results: There was a stepwise increase in oxalate concentrations associated with increased brewing times (P< 0.001) with oxalate contents ranging from 4.4 mg/240 ml for the 5 min to 6.3 mg/240 ml for 60 min brewing times, respectively. There were significant differences between the mean oxalate content of different dilutions after brewing for 15, 30 and 60 minutes (P< 0.001). Conclusion: The oxalate content of Iranian consumed black tea after different brewing times and different dilution was below the recommended levels. Therefore, it seems that consumption of black tea several times per day would not pose significant health risk in kidney stone patients and susceptible individuals. PMID:24688937

Consumer confidence in the safety of food and newspaper coverage of food safety issues: a longitudinal perspective.

PubMed

de Jonge, Janneke; Van Trijp, Hans; Renes, Reint Jan; Frewer, Lynn J

2010-01-01

This study develops a longitudinal perspective on consumer confidence in the safety of food to explore if, how, and why consumer confidence changes over time. In the first study, a theory-based monitoring instrument for consumer confidence in the safety of food was developed and validated. The monitoring instrument assesses consumer confidence together with its determinants. Model and measurement invariance were validated rigorously before developments in consumer confidence in the safety of food and its determinants were investigated over time. The results from the longitudinal analysis show that across four waves of annual data collection (2003-2006), the framework was stable and that the relative importance of the determinants of confidence was, generally, constant over time. Some changes were observed regarding the mean ratings on the latent constructs. The second study explored how newspaper coverage of food safety related issues affects consumer confidence in the safety of food through subjective consumer recall of food safety incidents. The results show that the newspaper coverage on food safety issues is positively associated with consumer recall of food safety incidents, both in terms of intensity and recency of media coverage.

Values and public acceptability dimensions of sustainable egg production.

PubMed

Thompson, P B; Appleby, M; Busch, L; Kalof, L; Miele, M; Norwood, B F; Pajor, E

2011-09-01

The attributes of egg production that elicit values-based responses include the price and availability of eggs, environmental impacts, food safety or health concerns, and animal welfare. Different social groups have distinct interests regarding the sustainability of egg production that reflect these diverse values. Current scientifically based knowledge about how values and attitudes in these groups can be characterized is uneven and must be derived from studies conducted at varying times and using incomplete study methods. In general, some producer and consumer interests are translated through markets and are mediated by market mechanisms, whereas others are poorly reflected by economic behavior. An array of survey and focus group research has been performed to elicit consumer and activist beliefs about performance goals they would expect from an egg production system. These studies provide evidence that consumers' market behavior may be at odds with their ethical and political beliefs about performance goals.

Consumer sleep tracking devices: a review of mechanisms, validity and utility.

PubMed

Kolla, Bhanu Prakash; Mansukhani, Subir; Mansukhani, Meghna P

2016-05-01

Consumer sleep tracking devices such as fitness trackers and smartphone apps have become increasingly popular. These devices claim to measure the sleep duration of their users and in some cases purport to measure sleep quality and awaken users from light sleep, potentially improving overall sleep. Most of these devices appear to utilize data generated from in-built accelerometers to determine sleep parameters but the exact mechanisms and algorithms are proprietary. The growing literature comparing these devices against polysomnography/actigraphy shows that they tend to underestimate sleep disruptions and overestimate total sleep times and sleep efficiency in normal subjects. In this review, we evaluate the current literature comparing the accuracy of consumer sleep tracking devices against more conventional methods used to measure sleep duration and quality. We discuss the current technology that these devices utilize as well as summarize the value of these devices in clinical evaluations and their potential limitations.

Forecasting of indirect consumables for a Job Shop

NASA Astrophysics Data System (ADS)

Shakeel, M.; Khan, S.; Khan, W. A.

2016-08-01

A job shop has an arrangement where similar machines (Direct consumables) are grouped together and use indirect consumables to produce a product. The indirect consumables include hack saw blades, emery paper, painting brush etc. The job shop is serving various orders at a particular time for the optimal operation of job shop. Forecasting is required to predict the demand of direct and indirect consumables in a job shop. Forecasting is also needed to manage lead time, optimize inventory cost and stock outs. The objective of this research is to obtain the forecast for indirect consumables. The paper shows how job shop can manage their indirect consumables more accurately by establishing a new technique of forecasting. This results in profitable use of job shop by multiple users.

Consumer behaviour towards vegetables: a study on domestic processing of broccoli and carrots by Dutch households.

PubMed

Bongoni, R; Verkerk, R; Dekker, M; Steenbekkers, L P A

2015-06-01

Preferences for sensory properties (e.g. taste and texture) are assumed to control cooking behaviour with respect to vegetables. Conditions such as the cooking method, amount of water used and the time-temperature profile determine the nutritional quality (e.g. vitamins and phytochemicals) of cooked vegetables. Information on domestic processing and any underlying motives can be used to inform consumers about cooking vegetables that are equally liked and are nutrient-rich. Two online self-reporting questionnaires were used to identify domestic processing conditions of broccoli and carrots by Dutch households. Questions on various aspects of domestic processing and consumer motives were included. Descriptive data analysis and hierarchical cluster analysis were performed for both vegetables, separately, to group consumers with similar motives and behaviour towards vegetables. Approximately 70% of consumers boiled vegetables, 8-9% steamed vegetables, 10-15% stir fried raw vegetables and 8-10% stir fried boiled vegetables. Mainly texture was used as a way to decide the 'doneness' of the vegetables. For both vegetables, three clusters of consumers were identified: texture-orientated, health-orientated, or taste-orientated. The texture-orientated consumers are identified as the most prevalent (56-59%) group in the present study. Statistically significant associations are found between domestic processing conditions and clusters, whereas no such association are found between demographic details and clusters. A wide variation in domestic processing of broccoli and carrots is found in the present study. Mainly sensory properties (i.e. texture and taste) determined the domestic processing conditions. The findings of the present study can be used to optimise cooking to yield vegetables that meet consumer's specific sensory preference and are higher in nutrients, and as well as to communicate with target consumer groups. © 2014 The British Dietetic Association Ltd.

Ethics, Risk and Benefits Associated with Different Applications of Nanotechnology: a Comparison of Expert and Consumer Perceptions of Drivers of Societal Acceptance.

PubMed

Gupta, N; Fischer, A R H; Frewer, L J

Examining those risk and benefit perceptions utilised in the formation of attitudes and opinions about emerging technologies such as nanotechnology can be useful for both industry and policy makers involved in their development, implementation and regulation. A broad range of different socio-psychological and affective factors may influence consumer responses to different applications of nanotechnology, including ethical concerns. A useful approach to identifying relevant consumer concerns and innovation priorities is to develop predictive constructs which can be used to differentiate applications of nanotechnology in a way which is meaningful to consumers. This requires elicitation of attitudinal constructs from consumers, rather than measuring attitudes assumed to be important by the researcher. Psychological factors influencing societal responses to 15 applications of nanotechnology drawn from different application areas (e.g. medicine, agriculture and environment, food, military, sports, and cosmetics) were identified using repertory grid method in conjunction with generalised Procrustes analysis. The results suggested that people differentiate nanotechnology applications based on the extent to which they perceive them to be beneficial, useful, necessary and important. The benefits may be offset by perceived risks focusing on fear and ethical concerns. Compared to an earlier expert study on societal acceptance of nanotechnology, consumers emphasised ethical issues compared to experts but had less concern regarding potential physical contact with the product and time to market introduction. Consumers envisaged fewer issues with several applications compared to experts, in particular food applications.

Consumer perception of balsamic vinegar: A cross-cultural study between Korea and Italy.

PubMed

Torri, Luisa; Jeon, Seon-Young; Piochi, Maria; Morini, Gabriella; Kim, Kwang-Ok

2017-01-01

Understanding cross-cultural differences in food perception is a key issue of food research in order to understand consumer behaviour in different countries. The objective of this study was to explore potential cultural differences of balsamic vinegar perception between Korean and Italian consumers using the sorted napping method. Nine balsamic vinegars different in terms of ingredients, aging time, and origin were evaluated by Korean (n=50) and Italian (n=49) consumers using sorted napping. Familiarity and food matching were also examined. Descriptive analysis was performed to verify the attitude of the consumers in product description. The results obtained from two groups of consumers in Korea and Italy revealed a higher description attitude of the Italians (higher number of total elicited attributes, of attributes in common with the trained panel, of attributes shared with the vocabulary reported in literature, of significant specific positive product-attribute associations). Italian subjects generated various descriptors associated with the European gastronomic culture (aromatic herbs, fortified wine, dried figs, Indian fig, Parmigiano-Reggiano cheese), whereas Korean consumers used more terms related to the Asian food culture (red ginseng, Chinese medicine, Japanese apricot, teriyaki sauce, persimmon vinegar, balloon flower roots). Moreover, cultural differences of food matching were also observed: the Italians would pair the balsamic vinegars mainly with vegetables, fruits and cheese, while Koreans would combine the balsamic vinegars preferably with bread, vegetables and meat. In conclusion, familiarity resulted the main factors for cross-cultural differentiation. Copyright © 2016. Published by Elsevier Ltd.

ASSESSMENT OF ATTENTION THRESHOLD IN RATS BY TITRATION OF VISUAL CUE DURATION DURING THE FIVE CHOICE SERIAL REACTION TIME TASK

PubMed Central

Martin, Thomas J.; Grigg, Amanda; Kim, Susy A.; Ririe, Douglas G.; Eisenach, James C.

2014-01-01

Background The 5 choice serial reaction time task (5CSRTT) is commonly used to assess attention in rodents. We sought to develop a variant of the 5CSRTT that would speed training to objective success criteria, and to test whether this variant could determine attention capability in each subject. New Method Fisher 344 rats were trained to perform a variant of the 5CSRTT in which the duration of visual cue presentation (cue duration) was titrated between trials based upon performance. The cue duration was decreased when the subject made a correct response, or increased with incorrect responses or omissions. Additionally, test day challenges were provided consisting of lengthening the intertrial interval and inclusion of a visual distracting stimulus. Results Rats readily titrated the cue duration to less than 1 sec in 25 training sessions or less (mean ± SEM, 22.9 ± 0.7), and the median cue duration (MCD) was calculated as a measure of attention threshold. Increasing the intertrial interval increased premature responses, decreased the number of trials completed, and increased the MCD. Decreasing the intertrial interval and time allotted for consuming the food reward demonstrated that a minimum of 3.5 sec is required for rats to consume two food pellets and successfully attend to the next trial. Visual distraction in the form of a 3 Hz flashing light increased the MCD and both premature and time out responses. Comparison with existing method The titration variant of the 5CSRTT is a useful method that dynamically measures attention threshold across a wide range of subject performance, and significantly decreases the time required for training. Task challenges produce similar effects in the titration method as reported for the classical procedure. Conclusions The titration 5CSRTT method is an efficient training procedure for assessing attention and can be utilized to assess the limit in performance ability across subjects and various schedule manipulations. PMID:25528113

Analysis of Biomass Sugars Using a Novel HPLC Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agblevor, F. A.; Hames, B. R.; Schell, D.

The precise quantitative analysis of biomass sugars is a very important step in the conversion of biomass feedstocks to fuels and chemicals. However, the most accurate method of biomass sugar analysis is based on the gas chromatography analysis of derivatized sugars either as alditol acetates or trimethylsilanes. The derivatization method is time consuming but the alternative high-performance liquid chromatography (HPLC) method cannot resolve most sugars found in biomass hydrolysates. We have demonstrated for the first time that by careful manipulation of the HPLC mobile phase, biomass monomeric sugars (arabinose, xylose, fructose, glucose, mannose, and galactose) can be analyzed quantitatively andmore » there is excellent baseline resolution of all the sugars. This method was demonstrated for standard sugars, pretreated corn stover liquid and solid fractions. Our method can also be used to analyze dimeric sugars (cellobiose and sucrose).« less

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2011 CFR

2011-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2012 CFR

2012-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2013 CFR

2013-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2014 CFR

2014-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

12 CFR 717.25 - Reasonable and simple methods of opting out.

Code of Federal Regulations, 2010 CFR

2010-01-01

... an Internet Web site, if the consumer agrees to the electronic delivery of information; (iv) Providing a toll-free telephone number that consumers may call to opt out; or (v) Allowing consumers to... single toll-free telephone number. (2) Opt-out methods that are not reasonable and simple. Reasonable and...

Nutrient Content of Consumed Elementary School Lunches: A Pilot Study from Sweden

ERIC Educational Resources Information Center

Rosander, Ulla; Rumpunen, Kimmo; Lindmark-Mansson, Helena; Gullberg, Bo; Paulsson, Marie; Holm, Ingvar

2013-01-01

Purpose/Objectives: Purpose was to investigate the nutrient content of Swedish school meals consumed by students in the context of national recommendations regarding food composition and intake. Methods: Composite samples of lunch meals consumed by six students during a five-day period were collected using the double portion method and analyzed…

Rectal swab sampling followed by an enrichment culture-based real-time PCR assay to detect Salmonella enterocolitis in children.

PubMed

Lin, L-H; Tsai, C-Y; Hung, M-H; Fang, Y-T; Ling, Q-D

2011-09-01

Although routine bacterial culture is the traditional reference standard method for the detection of Salmonella infection in children with diarrhoea, it is a time-consuming procedure that usually only gives results after 3-4 days. Some molecular detection methods can improve the turn-around time to within 24 h, but these methods are not applied directly from stool or rectal swab specimens as routine diagnostic methods for the detection of gastrointestinal pathogens. In this study, we tested the feasibility of a bacterial enrichment culture-based real-time PCR assay method for detecting and screening for diarrhoea in children caused by Salmonella. Our results showed that the minimum real-time PCR assay time required to detect enriched bacterial culture from a swab was 3 h. In all children with suspected Salmonella diarrhoea, the enrichment culture-based real-time PCR achieved 85.4% sensitivity and 98.1% specificity, as compared with the 53.7% sensitivity and 100% specificity of detection with the routine bacterial culture method. We suggest that rectal swab sampling followed by enrichment culture-based real-time PCR is suitable as a rapid method for detecting and screening for Salmonella in paediatric patients. © 2011 The Authors. Clinical Microbiology and Infection © 2011 European Society of Clinical Microbiology and Infectious Diseases.

What Is Direct-to-Consumer Genetic Testing?

MedlinePlus

... consumer genetic testing? What is direct-to-consumer genetic testing? Most of the time, genetic testing is ... testing. For more information about direct-to-consumer genetic testing: Centers for Disease Control and Prevention (CDC) ...

Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing.

PubMed

Lin, Yu-Hsiu; Hu, Yu-Chen

2018-04-27

The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved by 13.97%.

User and carer involvement in the training and education of health professionals: a review of the literature.

PubMed

Repper, Julie; Breeze, Jayne

2007-03-01

Health policy requires consumer involvement in services, research and education but little is known about how consumers are being involved in healthcare education, the effect on learning and practice, nor how involvement initiatives are being evaluated. To describe methods of involving consumers in healthcare education, discuss ways in which initiatives have been evaluated, and identify areas for development in education, practice and research. All papers reporting specific initiatives involving consumers in health care worker training and education were included. Viewpoint articles and studies of consumers training consumers were excluded. Cinahl, Medline, Assia, PsycINFO, British Nursing Index, Social Science Citation Index, citations from reference lists, relevant websites and personal communication with key people known to be working in this area. A narrative approach was taken with categorisation of data to reflect objectives of selected studies; method of involvement; process issues and evaluation. Thirty-eight papers were included; most provide small-scale qualitative studies of mental health service users and focus on process rather than outcome. Various methods of involvement are described and consumers consistently prioritise the need for training in interpersonal skills over 'technical' skills. There is little research into organisational strategies and no studies investigate the effect of consumer involvement on practice. Two studies indicated that students exposed to consumer involvement demonstrate more empathic understanding and better communication skills. There is tentative evidence that consumer involvement in training enhances workers' skills in the manner prioritised by consumers. However, if consumer involvement in training and education is to facilitate services that reflect the priorities of the people using them, it must be developed in partnership with service providers; further research is needed to explore the impact of consumer involvement and to track the development of organisational consumer involvement strategies, also systems for supporting consumers need to be established, including training for both consumers and staff.

New analytic results for speciation times in neutral models.

PubMed

Gernhard, Tanja

2008-05-01

In this paper, we investigate the standard Yule model, and a recently studied model of speciation and extinction, the "critical branching process." We develop an analytic way-as opposed to the common simulation approach-for calculating the speciation times in a reconstructed phylogenetic tree. Simple expressions for the density and the moments of the speciation times are obtained. Methods for dating a speciation event become valuable, if for the reconstructed phylogenetic trees, no time scale is available. A missing time scale could be due to supertree methods, morphological data, or molecular data which violates the molecular clock. Our analytic approach is, in particular, useful for the model with extinction, since simulations of birth-death processes which are conditioned on obtaining n extant species today are quite delicate. Further, simulations are very time consuming for big n under both models.

Enhancement of panoramic image resolution based on swift interpolation of Bezier surface

NASA Astrophysics Data System (ADS)

Xiao, Xiao; Yang, Guo-guang; Bai, Jian

2007-01-01

Panoramic annular lens project the view of the entire 360 degrees around the optical axis onto an annular plane based on the way of flat cylinder perspective. Due to the infinite depth of field and the linear mapping relationship between an object and an image, the panoramic imaging system plays important roles in the applications of robot vision, surveillance and virtual reality. An annular image needs to be unwrapped to conventional rectangular image without distortion, in which interpolation algorithm is necessary. Although cubic splines interpolation can enhance the resolution of unwrapped image, it occupies too much time to be applied in practices. This paper adopts interpolation method based on Bezier surface and proposes a swift interpolation algorithm for panoramic image, considering the characteristic of panoramic image. The result indicates that the resolution of the image is well enhanced compared with the image by cubic splines and bilinear interpolation. Meanwhile the time consumed is shortened up by 78% than the time consumed cubic interpolation.

Design and implementation of Bluetooth beacon in mobile payment system

NASA Astrophysics Data System (ADS)

Han, Tiantian; Ding, Lei

2017-08-01

The current line of payment means, mainly in the following ways, cash payment, credit card payment, WeChat Alipay sweep payment. There are many inconvenience in Cash payment, large amounts of cash inconvenience to carry, count the money to spend time and effort, true and false banknotes difficult to distinguish, ticket settlement easy to go wrong. Credit card payment is relatively time-consuming, and WeChat Alipay sweep payment need to sweep. Therefore, the design of a convenient, fast payment to meet the line to pay the demand is particularly important. Based on the characteristics of BLE Bluetooth wireless communication technology, this paper designs a kind of payment method based on Bluetooth beacon. Through the Bluetooth beacon broadcast consumption, consumers only need to open the relevant APP in the Android client, and you can get Bluetooth via mobile phone Bluetooth the amount of consumption of the standard broadcast, in accordance with the corresponding payment platform to complete the payment process, which pay less time to improve the efficiency of payment.

Interfacial and Mechanical Behavior of AA5456 Filling Friction-Stir-Welded Lap Joints Using Similar and Dissimilar Pins

NASA Astrophysics Data System (ADS)

Behmand, Saleh Alaei; Mirsalehi, Seyyed Ehsan; Omidvar, Hamid; Safarkhanian, Mohammad Ali

2016-10-01

In this article, filling friction stir welding (FFSW) of the remaining exit holes of AA5456 alloy friction-stir-welded lap joints was studied. For this purpose, the influences of different rotating speeds, holding times, and pin materials, AA5456 and AA2024, on the metallurgical structure and joint strength were investigated. The observations showed that defect-free lap joints are successfully obtainable by this method using similar and dissimilar consumable pins. The results indicated that the higher rotating speed and holding time adversely affect the weld performance. The best result was achieved for 30 seconds holding time, 500 rpm rotating speed, and AA2024 consumable pin. In this condition, a lap shear strength of 10 pct higher than that of the nonfilled joint, equivalent to about 94 pct of the original defect-free FSW joint, was obtained, whereas the GTAW filled joint showed only approximately 87 pct of the continuous FSW joint strength.

Does a time constraint modify results from rating-based conjoint analysis? Case study with orange/pomegranate juice bottles.

PubMed

Reis, Felipe; Machín, Leandro; Rosenthal, Amauri; Deliza, Rosires; Ares, Gastón

2016-12-01

People do not usually process all the available information on packages for making their food choices and rely on heuristics for making their decisions, particularly when having limited time. However, in most consumer studies encourage participants to invest a lot of time for making their choices. Therefore, imposing a time-constraint in consumer studies may increase their ecological validity. In this context, the aim of the present work was to evaluate the influence of a time-constraint on consumer evaluation of pomegranate/orange juice bottles using rating-based conjoint task. A consumer study with 100 participants was carried out, in which they had to evaluate 16 pomegranate/orange fruit juice bottles, differing in bottle design, front-of-pack nutritional information, nutrition claim and processing claim, and to rate their intention to purchase. Half of the participants evaluated the bottle images without time constraint and the other half had a time-constraint of 3s for evaluating each image. Eye-movements were recorded during the evaluation. Results showed that time-constraint when evaluating intention to purchase did not largely modify the way in which consumers visually processed bottle images. Regardless of the experimental condition (with or without time constraint), they tended to evaluate the same product characteristics and to give them the same relative importance. However, a trend towards a more superficial evaluation of the bottles that skipped complex information was observed. Regarding the influence of product characteristics on consumer intention to purchase, bottle design was the variable with the largest relative importance in both conditions, overriding the influence of nutritional or processing characteristics, which stresses the importance of graphic design in shaping consumer perception. Copyright © 2016 Elsevier Ltd. All rights reserved.

Automatic labeling of MR brain images through extensible learning and atlas forests.

PubMed

Xu, Lijun; Liu, Hong; Song, Enmin; Yan, Meng; Jin, Renchao; Hung, Chih-Cheng

2017-12-01

Multiatlas-based method is extensively used in MR brain images segmentation because of its simplicity and robustness. This method provides excellent accuracy although it is time consuming and limited in terms of obtaining information about new atlases. In this study, an automatic labeling of MR brain images through extensible learning and atlas forest is presented to address these limitations. We propose an extensible learning model which allows the multiatlas-based framework capable of managing the datasets with numerous atlases or dynamic atlas datasets and simultaneously ensure the accuracy of automatic labeling. Two new strategies are used to reduce the time and space complexity and improve the efficiency of the automatic labeling of brain MR images. First, atlases are encoded to atlas forests through random forest technology to reduce the time consumed for cross-registration between atlases and target image, and a scatter spatial vector is designed to eliminate errors caused by inaccurate registration. Second, an atlas selection method based on the extensible learning model is used to select atlases for target image without traversing the entire dataset and then obtain the accurate labeling. The labeling results of the proposed method were evaluated in three public datasets, namely, IBSR, LONI LPBA40, and ADNI. With the proposed method, the dice coefficient metric values on the three datasets were 84.17 ± 4.61%, 83.25 ± 4.29%, and 81.88 ± 4.53% which were 5% higher than those of the conventional method, respectively. The efficiency of the extensible learning model was evaluated by state-of-the-art methods for labeling of MR brain images. Experimental results showed that the proposed method could achieve accurate labeling for MR brain images without traversing the entire datasets. In the proposed multiatlas-based method, extensible learning and atlas forests were applied to control the automatic labeling of brain anatomies on large atlas datasets or dynamic atlas datasets and obtain accurate results. © 2017 American Association of Physicists in Medicine.

Selecting risk factors: a comparison of discriminant analysis, logistic regression and Cox's regression model using data from the Tromsø Heart Study.

PubMed

Brenn, T; Arnesen, E

1985-01-01

For comparative evaluation, discriminant analysis, logistic regression and Cox's model were used to select risk factors for total and coronary deaths among 6595 men aged 20-49 followed for 9 years. Groups with mortality between 5 and 93 per 1000 were considered. Discriminant analysis selected variable sets only marginally different from the logistic and Cox methods which always selected the same sets. A time-saving option, offered for both the logistic and Cox selection, showed no advantage compared with discriminant analysis. Analysing more than 3800 subjects, the logistic and Cox methods consumed, respectively, 80 and 10 times more computer time than discriminant analysis. When including the same set of variables in non-stepwise analyses, all methods estimated coefficients that in most cases were almost identical. In conclusion, discriminant analysis is advocated for preliminary or stepwise analysis, otherwise Cox's method should be used.

Identification of anaerobic bacteria by Bruker Biotyper matrix-assisted laser desorption ionization-time of flight mass spectrometry with on-plate formic acid preparation.

PubMed

Schmitt, Bryan H; Cunningham, Scott A; Dailey, Aaron L; Gustafson, Daniel R; Patel, Robin

2013-03-01

Identification of anaerobic bacteria using phenotypic methods is often time-consuming; methods such as 16S rRNA gene sequencing are costly and may not be readily available. We evaluated 253 clinical isolates of anaerobic bacteria using the Bruker MALDI Biotyper (Bruker Daltonics, Billerica, MA) matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) system with a user-supplemented database and an on-plate formic acid-based preparation method and compared results to those of conventional identification using biochemical testing or 16S rRNA gene sequencing. A total of 179 (70.8%) and 232 (91.7%) isolates were correctly identified to the species and genus levels, respectively, using manufacturer-recommended score cutoffs. MALDI-TOF MS offers a rapid, inexpensive method for identification of anaerobic bacteria.

Review of high-throughput techniques for detecting solid phase Transformation from material libraries produced by combinatorial methods

NASA Technical Reports Server (NTRS)

Lee, Jonathan A.

2005-01-01

High-throughput measurement techniques are reviewed for solid phase transformation from materials produced by combinatorial methods, which are highly efficient concepts to fabricate large variety of material libraries with different compositional gradients on a single wafer. Combinatorial methods hold high potential for reducing the time and costs associated with the development of new materials, as compared to time-consuming and labor-intensive conventional methods that test large batches of material, one- composition at a time. These high-throughput techniques can be automated to rapidly capture and analyze data, using the entire material library on a single wafer, thereby accelerating the pace of materials discovery and knowledge generation for solid phase transformations. The review covers experimental techniques that are applicable to inorganic materials such as shape memory alloys, graded materials, metal hydrides, ferric materials, semiconductors and industrial alloys.

Mass spectrometric-based stable isotopic 2-aminobenzoic acid glycan mapping for rapid glycan screening of biotherapeutics.

PubMed

Prien, Justin M; Prater, Bradley D; Qin, Qiang; Cockrill, Steven L

2010-02-15

Fast, sensitive, robust methods for "high-level" glycan screening are necessary during various stages of a biotherapeutic product's lifecycle, including clone selection, process changes, and quality control for lot release testing. Traditional glycan screening involves chromatographic or electrophoretic separation-based methods, and, although reproducible, these methods can be time-consuming. Even ultrahigh-performance chromatographic and microfluidic integrated LC/MS systems, which work on the tens of minute time scale, become lengthy when hundreds of samples are to be analyzed. Comparatively, a direct infusion mass spectrometry (MS)-based glycan screening method acquires data on a millisecond time scale, exhibits exquisite sensitivity and reproducibility, and is amenable to automated peak annotation. In addition, characterization of glycan species via sequential mass spectrometry can be performed simultaneously. Here, we demonstrate a quantitative high-throughput MS-based mapping approach using stable isotope 2-aminobenzoic acid (2-AA) for rapid "high-level" glycan screening.

[Revision of Medical Fee System for Treatment at Nursing Homes - The Influential Consideration of the Introduction of One-Patient-Per-Visit Method on the Welfare of Elderly Patients at Nursing Homes].

PubMed

Kondo, Seiji; Kondo, Yasuko; Fuse, Minako

2016-12-01

The 2014 revision of the medical fee system includes the introduction of a one-patient-per-visit method at nursing homes, which should be followed to avoid a drastic reduction in medical fees. We followed the new method, resulting in much more frequent visits to nursing homes(For example, we visit a facilitythree times per week instead of the previous two times per month). Frequent visits to multiple facilities are time- and effort-consuming on our side as a clinic, but, on the other hand, patients have more opportunities to see a doctor when theyare sick even if theyare not scheduled to do so. In this study, we examined how the new method affects the welfare of elderlypatients at nursing homes.

Micro-Raman spectroscopy for identification and classification of UTI bacteria

NASA Astrophysics Data System (ADS)

Yogesha, M.; Chawla, Kiran; Acharya, Mahendra; Chidangil, Santhosh; Bankapur, Aseefhali

2017-07-01

Urinary tract infection (UTI) is one of the major clinical problems known to mankind, especially among adult women. Conventional methods for identification of UTI causing bacteria are time consuming and expensive. Therefore, a rapid and cost-effective method is desired. In the present study, five bacteria (one Gram-positive and four Gram-negative), most commonly known to cause UTI, have been identified and classified using micro-Raman spectroscopy combined with principal component analysis (PCA).

Method of Characteristics Calculations and Computer Code for Materials with Arbitrary Equations of State and Using Orthogonal Polynomial Least Square Surface Fits

NASA Technical Reports Server (NTRS)

Chang, T. S.

1974-01-01

A numerical scheme using the method of characteristics to calculate the flow properties and pressures behind decaying shock waves for materials under hypervelocity impact is developed. Time-consuming double interpolation subroutines are replaced by a technique based on orthogonal polynomial least square surface fits. Typical calculated results are given and compared with the double interpolation results. The complete computer program is included.

Comparative Study of SVM Methods Combined with Voxel Selection for Object Category Classification on fMRI Data

PubMed Central

Song, Sutao; Zhan, Zhichao; Long, Zhiying; Zhang, Jiacai; Yao, Li

2011-01-01

Background Support vector machine (SVM) has been widely used as accurate and reliable method to decipher brain patterns from functional MRI (fMRI) data. Previous studies have not found a clear benefit for non-linear (polynomial kernel) SVM versus linear one. Here, a more effective non-linear SVM using radial basis function (RBF) kernel is compared with linear SVM. Different from traditional studies which focused either merely on the evaluation of different types of SVM or the voxel selection methods, we aimed to investigate the overall performance of linear and RBF SVM for fMRI classification together with voxel selection schemes on classification accuracy and time-consuming. Methodology/Principal Findings Six different voxel selection methods were employed to decide which voxels of fMRI data would be included in SVM classifiers with linear and RBF kernels in classifying 4-category objects. Then the overall performances of voxel selection and classification methods were compared. Results showed that: (1) Voxel selection had an important impact on the classification accuracy of the classifiers: in a relative low dimensional feature space, RBF SVM outperformed linear SVM significantly; in a relative high dimensional space, linear SVM performed better than its counterpart; (2) Considering the classification accuracy and time-consuming holistically, linear SVM with relative more voxels as features and RBF SVM with small set of voxels (after PCA) could achieve the better accuracy and cost shorter time. Conclusions/Significance The present work provides the first empirical result of linear and RBF SVM in classification of fMRI data, combined with voxel selection methods. Based on the findings, if only classification accuracy was concerned, RBF SVM with appropriate small voxels and linear SVM with relative more voxels were two suggested solutions; if users concerned more about the computational time, RBF SVM with relative small set of voxels when part of the principal components were kept as features was a better choice. PMID:21359184

Comparative study of SVM methods combined with voxel selection for object category classification on fMRI data.

PubMed

Song, Sutao; Zhan, Zhichao; Long, Zhiying; Zhang, Jiacai; Yao, Li

2011-02-16

Support vector machine (SVM) has been widely used as accurate and reliable method to decipher brain patterns from functional MRI (fMRI) data. Previous studies have not found a clear benefit for non-linear (polynomial kernel) SVM versus linear one. Here, a more effective non-linear SVM using radial basis function (RBF) kernel is compared with linear SVM. Different from traditional studies which focused either merely on the evaluation of different types of SVM or the voxel selection methods, we aimed to investigate the overall performance of linear and RBF SVM for fMRI classification together with voxel selection schemes on classification accuracy and time-consuming. Six different voxel selection methods were employed to decide which voxels of fMRI data would be included in SVM classifiers with linear and RBF kernels in classifying 4-category objects. Then the overall performances of voxel selection and classification methods were compared. Results showed that: (1) Voxel selection had an important impact on the classification accuracy of the classifiers: in a relative low dimensional feature space, RBF SVM outperformed linear SVM significantly; in a relative high dimensional space, linear SVM performed better than its counterpart; (2) Considering the classification accuracy and time-consuming holistically, linear SVM with relative more voxels as features and RBF SVM with small set of voxels (after PCA) could achieve the better accuracy and cost shorter time. The present work provides the first empirical result of linear and RBF SVM in classification of fMRI data, combined with voxel selection methods. Based on the findings, if only classification accuracy was concerned, RBF SVM with appropriate small voxels and linear SVM with relative more voxels were two suggested solutions; if users concerned more about the computational time, RBF SVM with relative small set of voxels when part of the principal components were kept as features was a better choice.

Residential Customer Enrollment in Time-based Rate and Enabling Technology Programs: Smart Grid Investment Grant Consumer Behavior Study Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, Annika; Cappers, Peter; Goldman, Charles

2013-05-01

The U.S. Department of Energy’s (DOE’s) Smart Grid Investment Grant (SGIG) program is working with a subset of the 99 SGIG projects undertaking Consumer Behavior Studies (CBS), which examine the response of mass market consumers (i.e., residential and small commercial customers) to time-varying electricity prices (referred to herein as time-based rate programs) in conjunction with the deployment of advanced metering infrastructure (AMI) and associated technologies. The effort presents an opportunity to advance the electric industry’s understanding of consumer behavior.

Understanding the role of individual consumer-provider relationships within assertive community treatment.

PubMed

Stanhope, Victoria; Matejkowski, Jason

2010-08-01

The widespread adoption of assertive community treatment has resulted in a shift from an individual model to a team model of case management. The shift has had implications for individual relationships between case managers and consumers, but still little is known about how these relationships develop in teams. This exploratory mixed methods study looked at how case managers and consumers negotiate individual relationships within a team model. Quantitative methods identified high and low service intensity relationships between consumers and case managers and qualitative methods explored and compared these relationships. Consumers in high service intensity relationships described a preference for certain case managers and the burden of working with multiple people. Case managers invested high service intensity relationships with special therapeutic value, articulated the challenges of coordinating care across the team, and utilized team limit setting techniques. In contrast, low service intensity relationships were more likely to reflect integration with the entire team. Findings suggest that teams need to consider how individual relationships enhance care for their consumers and how to nurture these relationships while maintaining the support necessary for case managers and consumers.

Time-Varying Transition Probability Matrix Estimation and Its Application to Brand Share Analysis.

PubMed

Chiba, Tomoaki; Hino, Hideitsu; Akaho, Shotaro; Murata, Noboru

2017-01-01

In a product market or stock market, different products or stocks compete for the same consumers or purchasers. We propose a method to estimate the time-varying transition matrix of the product share using a multivariate time series of the product share. The method is based on the assumption that each of the observed time series of shares is a stationary distribution of the underlying Markov processes characterized by transition probability matrices. We estimate transition probability matrices for every observation under natural assumptions. We demonstrate, on a real-world dataset of the share of automobiles, that the proposed method can find intrinsic transition of shares. The resulting transition matrices reveal interesting phenomena, for example, the change in flows between TOYOTA group and GM group for the fiscal year where TOYOTA group's sales beat GM's sales, which is a reasonable scenario.

Time-Varying Transition Probability Matrix Estimation and Its Application to Brand Share Analysis

PubMed Central

Chiba, Tomoaki; Akaho, Shotaro; Murata, Noboru

2017-01-01

In a product market or stock market, different products or stocks compete for the same consumers or purchasers. We propose a method to estimate the time-varying transition matrix of the product share using a multivariate time series of the product share. The method is based on the assumption that each of the observed time series of shares is a stationary distribution of the underlying Markov processes characterized by transition probability matrices. We estimate transition probability matrices for every observation under natural assumptions. We demonstrate, on a real-world dataset of the share of automobiles, that the proposed method can find intrinsic transition of shares. The resulting transition matrices reveal interesting phenomena, for example, the change in flows between TOYOTA group and GM group for the fiscal year where TOYOTA group’s sales beat GM’s sales, which is a reasonable scenario. PMID:28076383

Efficient Multi-Atlas Registration using an Intermediate Template Image

PubMed Central

Dewey, Blake E.; Carass, Aaron; Blitz, Ari M.; Prince, Jerry L.

2017-01-01

Multi-atlas label fusion is an accurate but time-consuming method of labeling the human brain. Using an intermediate image as a registration target can allow researchers to reduce time constraints by storing the deformations required of the atlas images. In this paper, we investigate the effect of registration through an intermediate template image on multi-atlas label fusion and propose a novel registration technique to counteract the negative effects of through-template registration. We show that overall computation time can be decreased dramatically with minimal impact on final label accuracy and time can be exchanged for improved results in a predictable manner. We see almost complete recovery of Dice similarity over a simple through-template registration using the corrected method and still maintain a 3–4 times speed increase. Further, we evaluate the effectiveness of this method on brains of patients with normal-pressure hydrocephalus, where abnormal brain shape presents labeling difficulties, specifically the ventricular labels. Our correction method creates substantially better ventricular labeling than traditional methods and maintains the speed increase seen in healthy subjects. PMID:28943702

Efficient multi-atlas registration using an intermediate template image

NASA Astrophysics Data System (ADS)

Dewey, Blake E.; Carass, Aaron; Blitz, Ari M.; Prince, Jerry L.

2017-03-01

Multi-atlas label fusion is an accurate but time-consuming method of labeling the human brain. Using an intermediate image as a registration target can allow researchers to reduce time constraints by storing the deformations required of the atlas images. In this paper, we investigate the effect of registration through an intermediate template image on multi-atlas label fusion and propose a novel registration technique to counteract the negative effects of through-template registration. We show that overall computation time can be decreased dramatically with minimal impact on final label accuracy and time can be exchanged for improved results in a predictable manner. We see almost complete recovery of Dice similarity over a simple through-template registration using the corrected method and still maintain a 3-4 times speed increase. Further, we evaluate the effectiveness of this method on brains of patients with normal-pressure hydrocephalus, where abnormal brain shape presents labeling difficulties, specifically the ventricular labels. Our correction method creates substantially better ventricular labeling than traditional methods and maintains the speed increase seen in healthy subjects.

Developing consumer involvement in rural HIV primary care programmes.

PubMed

Mamary, Edward M; Toevs, Kim; Burnworth, Karla B; Becker, Lin

2004-06-01

As part of a broader medical and psychosocial needs assessment in a rural region of northern California, USA, five focus groups were conducted to explore innovative approaches to creating a system of consumer involvement in the delivery of HIV primary care services in the region. A total of five focus groups (n = 30) were conducted with clients from three of five counties in the region with the highest number of HIV patients receiving primary care. Participants were recruited by their HIV case managers. They were adults living with HIV, who were receiving health care, and who resided in a rural mountain region of northern California. Group discussions explored ideas for new strategies and examined traditional methods of consumer involvement, considering ways they could be adapted for a rural environment. Recommendations for consumer involvement included a multi-method approach consisting of traditional written surveys, a formal advisory group, and monthly consumer led social support/informal input groups. Specific challenges discussed included winter weather conditions, transportation barriers, physical limitations, confidentiality concerns, and needs for social support and education. A multiple-method approach would ensure more comprehensive consumer involvement in the programme planning process. It is also evident that methods for incorporating consumer involvement must be adapted to the specific context and circumstances of a given programme.

Customized-Language Voice Survey on Mobile Devices for Text and Image Data Collection Among Ethnic Groups in Thailand: A Proof-of-Concept Study.

PubMed

Jandee, Kasemsak; Lawpoolsri, Saranath; Taechaboonsermsak, Pimsurang; Khamsiriwatchara, Amnat; Wansatid, Peerawat; Kaewkungwal, Jaranit

2014-03-06

Public health surveys are often conducted using paper-based questionnaires. However, many problems are associated with this method, especially when collecting data among ethnic groups who speak a different language from the survey interviewer. The process can be time-consuming and there is the risk of missing important data due to incomplete surveys. This study was conducted as a proof-of-concept to develop a new electronic tool for data collection, and compare it with standard paper-based questionnaire surveys using the research setting of assessing Knowledge Attitude and Practice (KAP) toward the Expanded Program on Immunization (EPI) among 6 ethnic groups in Chiang Rai Province, Thailand. The two data collection methods were compared on data quality in terms of data completeness and time consumed in collecting the information. In addition, the initiative assessed the participants' satisfaction toward the use of a smartphone customized-language voice-based questionnaire in terms of perceived ease of use and perceived usefulness. Following a cross-over design, all study participants were interviewed using two data collection methods after a one-week washout period. Questions in the paper-based questionnaires in Thai language were translated to each ethnic language by the interviewer/translator when interviewing the study participant. The customized-language voice-based questionnaires were programmed to a smartphone tablet in six, selectable dialect languages and used by the trained interviewer when approaching participants. The study revealed positive data quality outcomes when using the smartphone, voice-based questionnaire survey compared with the paper-based questionnaire survey, both in terms of data completeness and time consumed in data collection process. Since the smartphone questionnaire survey was programmed to ask questions in sequence, no data was missing and there were no entry errors. Participants had positive attitudes toward answering the smartphone questionnaire; 69% (48/70) reported they understood the questions easily, 71% (50/70) found it convenient, and 66% (46/70) reported a reduced time in data collection. The smartphone data collection method was acceptable by both the interviewers and by the study participants of different ethnicities. To our knowledge, this is the first study showing that the application of specific features of mobile devices like smartphone tablets (including dropdown choices, capturing pictures, and voiced questions) can be successfully used for data collection. The mobile device can be effectively used for capturing photos of secondary data and collecting primary data with customized-language and voiced questionnaire survey. Using smartphone questionnaires can minimize or eliminate missing data and reduce the time consumed during the data collection process. Smartphone customized-language, voice-based questionnaires for data collection can be an alternative and better approach than standard translated paper-based questionnaires for public health surveys, especially when collecting data among ethnic and hard-to-reach groups residing in multilanguage-speaking settings.

Proximate Composition Analysis.

PubMed

2016-01-01

The proximate composition of foods includes moisture, ash, lipid, protein and carbohydrate contents. These food components may be of interest in the food industry for product development, quality control (QC) or regulatory purposes. Analyses used may be rapid methods for QC or more accurate but time-consuming official methods. Sample collection and preparation must be considered carefully to ensure analysis of a homogeneous and representative sample, and to obtain accurate results. Estimation methods of moisture content, ash value, crude lipid, total carbohydrates, starch, total free amino acids and total proteins are put together in a lucid manner.

A novel approach for fabricating NiO hollow spheres for gas sensors

NASA Astrophysics Data System (ADS)

Kuang, Chengwei; Zeng, Wen; Ye, Hong; Li, Yanqiong

2018-03-01

Hollow spheres are usually fabricated by hard template methods or soft template methods with soft surfactants, which is quiet tedious and time-consuming. In this paper, NiO hollow spheres with fluffy surface were successfully synthesized by a facile hydrothermal method and subsequent calcination, where bubbles acted as the template. NiO hollow spheres exhibited excellent gas sensing performances, which results from its hollow structure and high specific surface area. In addition, a possible evolution mechanism of NiO hollow spheres was proposed based on experimental results.

A method for automatic matching of multi-timepoint findings for enhanced clinical workflow

NASA Astrophysics Data System (ADS)

Raghupathi, Laks; Dinesh, MS; Devarakota, Pandu R.; Valadez, Gerardo Hermosillo; Wolf, Matthias

2013-03-01

Non-interventional diagnostics (CT or MR) enables early identification of diseases like cancer. Often, lesion growth assessment done during follow-up is used to distinguish between benign and malignant ones. Thus correspondences need to be found for lesions localized at each time point. Manually matching the radiological findings can be time consuming as well as tedious due to possible differences in orientation and position between scans. Also, the complicated nature of the disease makes the physicians to rely on multiple modalities (PETCT, PET-MR) where it is even more challenging. Here, we propose an automatic feature-based matching that is robust to change in organ volume, subpar or no registration that can be done with very less computations. Traditional matching methods rely mostly on accurate image registration and applying the resulting deformation map on the findings coordinates. This has disadvantages when accurate registration is time-consuming or may not be possible due to vast organ volume differences between scans. Our novel matching proposes supervised learning by taking advantage of the underlying CAD features that are already present and considering the matching as a classification problem. In addition, the matching can be done extremely fast and at reasonable accuracy even when the image registration fails for some reason. Experimental results∗ on real-world multi-time point thoracic CT data showed an accuracy of above 90% with negligible false positives on a variety of registration scenarios.

Principles of capacity management, applied in the mental health context.

PubMed

Zeitz, Kathryn; Watson, Darryl

2017-06-22

Objective The aim of the paper was to describe a suite of capacity management principles that have been applied in the mental health setting that resulted in a significant reduction in time spent in two emergency departments (ED) and improved throughput. Methods The project consisted of a multifocal change approach over three phases that included: (1) the implementation of a suite of fundamental capacity management activities led by the service and clinical director; (2) a targeted Winter Demand Plan supported by McKinsey and Co.; and (3) a sustainability of change phase. Descriptive statistics was used to analyse the performance data that was collected through-out the project. Results This capacity management project has resulted in sustained patient flow improvement. There was a reduction in the average length of stay (LOS) in the ED for consumers with mental health presentations to the ED. At the commencement of the project, in July 2014, the average LOS was 20.5h compared with 8.5h in December 2015 post the sustainability phase. In July 2014, the percentage of consumers staying longer than 24h was 26% (n=112); in November and December 2015, this had reduced to 6% and 7 5% respectively (less than one consumer per day). Conclusion Improving patient flow is multifactorial. Increased attendances in public EDs by people with mental health problems and the lengthening boarding in the ED affect the overall ED throughput. Key strategies to improve mental health consumer flow need to focus on engagement, leadership, embedding fundamentals, managing and target setting. What is known about the topic? Improving patient flow in the acute sector is an emerging topic in the health literature in response to increasing pressures of access block in EDs. What does this paper add? This paper describes the application of a suite of patient flow improvement principles that were applied in the mental health setting that significantly reduced the waiting time for consumers in two EDs. What are the implications for practitioners? No single improvement will reduce access block in the ED for mental health consumers. Reductions in waiting times require a concerted, multifocal approach across all components of the acute mental health journey.

Mass spectrometry-compatible silver staining of histones resolved on acetic acid-urea-Triton PAGE.

PubMed

Pramod, Khare Satyajeet; Bharat, Khade; Sanjay, Gupta

2009-05-01

Acetic acid-Urea-Triton (AUT) PAGE is commonly used method to separate histone variants and their post-translationally modified forms. Coomassie staining is the preferred method for protein visualization; however, its sensitivity is less than that of silver staining. Though silver staining of histones in AUT-PAGE has been reported, the method is time-consuming, dependent on prior staining by Amido black and has not been reported suitable for mass spectrometry. Here, we propose 'SDS-Silver' method for rapid, sensitive and mass spectrometry-compatible staining of histones resolved on AUT-PAGE.

Optimization of a Viability PCR Method for the Detection of Listeria monocytogenes in Food Samples.

PubMed

Agustí, Gemma; Fittipaldi, Mariana; Codony, Francesc

2018-06-01

Rapid detection of Listeria and other microbial pathogens in food is an essential part of quality control and it is critical for ensuring the safety of consumers. Culture-based methods for detecting foodborne pathogens are time-consuming, laborious and cannot detect viable but non-culturable microorganism, whereas viability PCR methodology provides quick results; it is able to detect viable but non-culturable cells, and allows for easier handling of large amount of samples. Although the most critical point to use viability PCR technique is achieving the complete exclusion of dead cell amplification signals, many improvements are being introduced to overcome this. In the present work, the yield of dead cell DNA neutralization was enhanced by incorporating two new sample treatment strategies: tube change combined with a double light treatment. This procedure was successfully tested using artificially contaminated food samples, showing improved neutralization of dead cell DNA.

Shrink-induced superhydrophobic and antibacterial surfaces in consumer plastics.

PubMed

Freschauf, Lauren R; McLane, Jolie; Sharma, Himanshu; Khine, Michelle

2012-01-01

Structurally modified superhydrophobic surfaces have become particularly desirable as stable antibacterial surfaces. Because their self-cleaning and water resistant properties prohibit bacteria growth, structurally modified superhydrophobic surfaces obviate bacterial resistance common with chemical agents, and therefore a robust and stable means to prevent bacteria growth is possible. In this study, we present a rapid fabrication method for creating such superhydrophobic surfaces in consumer hard plastic materials with resulting antibacterial effects. To replace complex fabrication materials and techniques, the initial mold is made with commodity shrink-wrap film and is compatible with large plastic roll-to-roll manufacturing and scale-up techniques. This method involves a purely structural modification free of chemical additives leading to its inherent consistency over time and successive recasting from the same molds. Finally, antibacterial properties are demonstrated in polystyrene (PS), polycarbonate (PC), and polyethylene (PE) by demonstrating the prevention of gram-negative Escherichia coli (E. coli) bacteria growth on our structured plastic surfaces.

A rigorous assessment of tree height measurements obtained using airborne LIDAR and conventional field methods.

Treesearch

Hans-Erik Andersen; Stephen E. Reutebuch; Robert J. McGaughey

2006-01-01

Tree height is an important variable in forest inventory programs but is typically time-consuming and costly to measure in the field using conventional techniques. Airborne light detection and ranging (LIDAR) provides individual tree height measurements that are highly correlated with field-derived measurements, but the imprecision of conventional field techniques does...

Relationship between Effective Application of Machine Learning and Malware Detection: A Quantitative Study

ERIC Educational Resources Information Center

Enfinger, Kerry Wayne

2016-01-01

The number of malicious files present in the public domain continues to rise at a substantial rate. Current anti-malware software utilizes a signature-based method to detect the presence of malicious software. Generating these pattern signatures is time consuming due to malicious code complexity and the need for expert analysis, however, by making…

Multi-scale soil moisture model calibration and validation: An ARS Watershed on the South Fork of the Iowa River

USDA-ARS?s Scientific Manuscript database

Soil moisture monitoring with in situ technology is a time consuming and costly endeavor for which a method of increasing the resolution of spatial estimates across in situ networks is necessary. Using a simple hydrologic model, the resolution of an in situ watershed network can be increased beyond...

The use of hoop nets seeded with mature brook trout to capture conspecifics

Treesearch

James A. Lamansky; Ernest R. Keeley; Michael K. Young; Kevin A. Meyer

2009-01-01

The brook trout Salvelinus fontinalis, a native of eastern North America, is considered an invasive species in the western United States because it has been implicated in the decline of many native trout species there. Current methods for controlling brook trout are usually time-consuming and expensive and are sometimes harmful to nontarget species....

Exploring Methods for Developing Behaviorally Anchored Rating Scales for Evaluating Structured Interview Performance. Research Report. ETS RR-17-28

ERIC Educational Resources Information Center

Kell, Harrison J.; Martin-Raugh, Michelle P.; Carney, Lauren M.; Inglese, Patricia A.; Chen, Lei; Feng, Gary

2017-01-01

Behaviorally anchored rating scales (BARS) are an essential component of structured interviews. Use of BARS to evaluate interviewees' performance is associated with greater predictive validity and reliability and less bias. BARS are time-consuming and expensive to construct, however. This report explores the feasibility of gathering participants'…

Strength Training: Program Organization and Proper Neck Development.

ERIC Educational Resources Information Center

Riley, Dan

During the 1960s, weightlifters and bodybuilders were the primary source for strength training methods, and their techniques were used by coaches to train athletes. In weight-training, it is the responsibility of trainers and coaches to provide the athlete with a program that produces the best results, consumes the least amount of time, and best…

Critical Thinking Outcomes of Computer-Assisted Instruction versus Written Nursing Process.

ERIC Educational Resources Information Center

Saucier, Bonnie L.; Stevens, Kathleen R.; Williams, Gail B.

2000-01-01

Nursing students (n=43) who used clinical case studies via computer-assisted instruction (CAI) were compared with 37 who used the written nursing process (WNP). California Critical Thinking Skills Test results did not show significant increases in critical thinking. The WNP method was more time consuming; the CAI group was more satisfied. Use of…

Cotton yield estimation using very high-resolution digital images acquired on a low-cost small unmanned aerial vehicle

USDA-ARS?s Scientific Manuscript database

Yield estimation is a critical task in crop management. A number of traditional methods are available for crop yield estimation but they are costly, time-consuming and difficult to expand to a relatively large field. Remote sensing provides techniques to develop quick coverage over a field at any sc...

A Process for Reviewing and Evaluating Generated Test Items

ERIC Educational Resources Information Center

Gierl, Mark J.; Lai, Hollis

2016-01-01

Testing organization needs large numbers of high-quality items due to the proliferation of alternative test administration methods and modern test designs. But the current demand for items far exceeds the supply. Test items, as they are currently written, evoke a process that is both time-consuming and expensive because each item is written,…

A method for explaining trends in river recreation demand

Treesearch

George L. Peterson; David W. Lime; Dorothy H. Anderson

1980-01-01

Data being collected by The National River Recreation Study (NRRS) (U.S. Forest Service, St. Paul) includes origin-destination information for recreational visits to a variety of rivers nationwide. Such data are being collected over several years during a time of rapidly changing energy costs, economic conditions and consumer attitudes. This presents an opportunity to...

An electric-analog simulation of elliptic partial differential equations using finite element theory

USGS Publications Warehouse

Franke, O.L.; Pinder, G.F.; Patten, E.P.

1982-01-01

Elliptic partial differential equations can be solved using the Galerkin-finite element method to generate the approximating algebraic equations, and an electrical network to solve the resulting matrices. Some element configurations require the use of networks containing negative resistances which, while physically realizable, are more expensive and time-consuming to construct. ?? 1982.

Anticipatory Consumer Socialization.

ERIC Educational Resources Information Center

Moore, Roy L.; Moschis, George P.

Anticipatory consumer socialization is the learning of consumer roles and perceptions, which will be assumed at a later time, such as those that children acquire before they become adult consumers. A survey of 784 adolescents was conducted in a southern state to examine the anticipatory consumer socialization effects of such factors as the mass…

The compatibility of consumer DLP projectors with time-sequential stereoscopic 3D visualisation

NASA Astrophysics Data System (ADS)

Woods, Andrew J.; Rourke, Tegan

2007-02-01

A range of advertised "Stereo-Ready" DLP projectors are now available in the market which allow high-quality flickerfree stereoscopic 3D visualization using the time-sequential stereoscopic display method. The ability to use a single projector for stereoscopic viewing offers a range of advantages, including extremely good stereoscopic alignment, and in some cases, portability. It has also recently become known that some consumer DLP projectors can be used for timesequential stereoscopic visualization, however it was not well understood which projectors are compatible and incompatible, what display modes (frequency and resolution) are compatible, and what stereoscopic display quality attributes are important. We conducted a study to test a wide range of projectors for stereoscopic compatibility. This paper reports on the testing of 45 consumer DLP projectors of widely different specifications (brand, resolution, brightness, etc). The projectors were tested for stereoscopic compatibility with various video formats (PAL, NTSC, 480P, 576P, and various VGA resolutions) and video input connections (composite, SVideo, component, and VGA). Fifteen projectors were found to work well at up to 85Hz stereo in VGA mode. Twenty three projectors would work at 60Hz stereo in VGA mode.

RFID in Space: Exploring the Feasibility and Performance of Gen 2 Tags as a Means of Tracking Equipment, Supplies, and Consumable Products in Cargo Transport Bags onboard a Space Vehicle or Habitat

NASA Technical Reports Server (NTRS)

Jones, Erick C.; Richards, Casey; Herstein, Kelli; Franca, Rodrigo; Yagoda, Evan L.; Vasquez, Reuben

2008-01-01

Current inventory management techniques for consumables and supplies aboard space vehicles are burdensome and time consuming. Inventory of food, clothing, and supplies are taken periodically by manually scanning the barcodes on each item. The inaccuracy of reading barcodes and the excessive amount of time it takes for the astronauts to perform this function would be better spent doing scientific experiments. Therefore, there is a need for an alternative method of inventory control by NASA astronauts. Radio Frequency Identification (RFID) is an automatic data capture technology that has potential to create a more effective and user-friendly inventory management system (IMS). In this paper we introduce a Design for Six Sigma Research (DFSS-R) methodology that allows for reliability testing of RFID systems. The research methodology uses a modified sequential design of experiments process to test and evaluate the quality of commercially available RFID technology. The results from the experimentation are compared to the requirements provided by NASA to evaluate the feasibility of using passive Generation 2 RFID technology to improve inventory control aboard crew exploration vehicles.

A Fast Evaluation Method for Energy Building Consumption Based on the Design of Experiments

NASA Astrophysics Data System (ADS)

Belahya, Hocine; Boubekri, Abdelghani; Kriker, Abdelouahed

2017-08-01

Building sector is one of the effective consumer energy by 42% in Algeria. The need for energy has continued to grow, in inordinate way, due to lack of legislation on energy performance in this large consumer sector. Another reason is the simultaneous change of users’ requirements to maintain their comfort, especially summer in dry lands and parts of southern Algeria, where the town of Ouargla presents a typical example which leads to a large amount of electricity consumption through the use of air conditioning. In order to achieve a high performance envelope of the building, an optimization of major parameters building envelope is required, using design of experiments (DOE), can determine the most effective parameters and eliminate the less importance. The study building is often complex and time consuming due to the large number of parameters to consider. This study focuses on reducing the computing time and determines the major parameters of building energy consumption, such as area of building, factor shape, orientation, ration walls to windows …etc to make some proposal models in order to minimize the seasonal energy consumption due to air conditioning needs.

FTIR spectroscopy in medical mycology: applications to the differentiation and typing of Candida.

PubMed

Toubas, Dominique; Essendoubi, Mohammed; Adt, Isabelle; Pinon, Jean-Michel; Manfait, Michel; Sockalingum, Ganesh D

2007-03-01

The incidence of fungal infections, in particular candidiasis and aspergillosis, has considerably increased during the last three decades. This is mainly due to advances in medical treatments and technologies. In high risk patients (e.g. in haematology or intensive care), the prognosis of invasive candidiasis is relatively poor. Therefore, a rapid and correct identification of the infectious agent is important for an efficient and prompt therapy. Most clinical laboratories rely on conventional identification methods that are based on morphological, physiological and nutritional characteristics. However, these have their limitations because they are time-consuming and not always very accurate. Moreover, molecular methods may be required to determine the genetic relationship between the infectious strains, for instance in Candida outbreaks. In addition, the latter methods require time, expensive consumables and highly trained staff to be performed adequately. In this study, we have applied the FTIR spectroscopic approach to different situations encountered in routine mycological diagnosis. We show the potentials of this phenotypic approach, used in parallel with routine identification methods, for the differentiation of 3 frequently encountered Candida species (C. albicans, C. glabrata and C. krusei) by using both suspensions and microcolonies. This approach, developed for an early discrimination, may help in the initial choice of antifungal treatment. Furthermore, we demonstrate the feasibility of the method for intraspecies comparison (typing) of 3 Candida species (C. albicans, C. glabrata and C. parapsilosis), particularly when an outbreak is suspected.

A new method to study simultaneous methane oxidation and methane production in soils

NASA Astrophysics Data System (ADS)

Andersen, B. L.; Bidoglio, G.; Leip, A.; Rembges, D.

1998-12-01

Results of laboratory experiments show that 14C-labeled methane added to soil was consumed faster than atmospheric 12C methane. This implies a source of methane, presumably through methanogenesis, in a soil that is a net consumer of atmospheric methane. The soil was well-drained forest soil from Ispra, Italy. An undisturbed sample was taken with a steel corer and incubated under oxic conditions in a jar. Headspace samples were taken at time intervals and analyzed for total methane by gas chromatography and analyzed for 14C methane by liquid scintillation counting. Fluxes calculated from the decreasing headspace mixing ratios were, for example, -6.5 and -7.1 μmol m-2 hr-1 for 12C methane and 14C methane, respectively. A simple model is considered which reproduces reasonably well the observed mixing ratios as function of time.

Weighting Statistical Inputs for Data Used to Support Effective Decision Making During Severe Emergency Weather and Environmental Events

NASA Technical Reports Server (NTRS)

Gardner, Adrian

2010-01-01

National Aeronautical and Space Administration (NASA) weather and atmospheric environmental organizations are insatiable consumers of geophysical, hydrometeorological and solar weather statistics. The expanding array of internet-worked sensors producing targeted physical measurements has generated an almost factorial explosion of near real-time inputs to topical statistical datasets. Normalizing and value-based parsing of such statistical datasets in support of time-constrained weather and environmental alerts and warnings is essential, even with dedicated high-performance computational capabilities. What are the optimal indicators for advanced decision making? How do we recognize the line between sufficient statistical sampling and excessive, mission destructive sampling ? How do we assure that the normalization and parsing process, when interpolated through numerical models, yields accurate and actionable alerts and warnings? This presentation will address the integrated means and methods to achieve desired outputs for NASA and consumers of its data.

Traditional and online consumers in China: a preliminary study of their personality traits and decision-making styles.

PubMed

Zhu, Junpeng; Xu, You; Huang, Jingyi; Yeow, Changdar; Wang, Wei

2012-12-01

Population of online consumers increases rapidly, but the decision-making styles of online consumers and psychiatric denominators such as the personality correlates remain unclear. In 196 traditional, and 196 age-, education- and gender-matched online consumers, we have tested the Zuckerman-Kuhlman Personality Questionnaire (ZKPQ) and the Consumer Style Inventory (CSI). After exploratory and confirmatory factor analyses, we have defined a five-factor model CSI with 24 items. Online consumers scored lower on ZKPQ Neuroticism-Anxiety and higher on Aggression-Hostility than traditional ones did, and scored higher on CSI Novelty-fashion consciousness and Brand consciousness, and lower on Time consciousness than the traditional consumers did. ZKPQ Neuroticism-Anxiety was positively correlated with CSI Confused by overchoice in both groups, Sociability was positively correlated with Novelty-fashion consciousness and negatively with Time consciousness in traditional group, and Impulsive Sensation Seeking was positively correlated with Novelty-fashion consciousness and Time consciousness in online group. Our study suggests that, regarding the decision-making styles, online consumers display curiosity that lacks security and need other ways to improve their social lives. It also calls further designs to address the contributions of other psychiatric features to the particular decision-making styles in online consumers.

Machine for preparing phosphors for the fluorimetric determination of uranium

USGS Publications Warehouse

Stevens, R.E.; Wood, W.H.; Goetz, K.G.; Horr, C.A.

1956-01-01

The time saved by use of a machine for preparing many phosphors at one time increases the rate of productivity of the fluorimetric method for determining uranium. The machine prepares 18 phosphors at a time and eliminates the tedious and time-consuming step of preparing them by hand, while improving the precision of the method in some localities. The machine consists of a ring burner over which the platinum dishes, containing uranium and flux, are rotated. By placing the machine in an inclined position the molten flux comes into contact with all surfaces within th dish as the dishes rotate over the flame. Precision is improved because the heating and cooling conditions are the same for each of the 18 phosphors in one run as well as for successive runs.

Beyond traditional advertisements: leveraging Facebook's social structures for research recruitment.

PubMed

Valdez, Rupa S; Guterbock, Thomas M; Thompson, Morgan J; Reilly, Jeremiah D; Menefee, Hannah K; Bennici, Maria S; Williams, Ishan C; Rexrode, Deborah L

2014-10-27

Obtaining access to a demographically and geographically diverse sample for health-related research can be costly and time consuming. Previous studies have reported mixed results regarding the potential of using social media-based advertisements to overcome these challenges. Our aim was to develop and assess the feasibility, benefits, and challenges of recruiting for research studies related to consumer health information technology (IT) by leveraging the social structures embedded in the social networking platform, Facebook. Two recruitment strategies that involved direct communication with existing Facebook groups and pages were developed and implemented in two distinct populations. The first recruitment strategy involved posting a survey link directly to consenting groups and pages and was used to recruit Filipino-Americans to a study assessing the perceptions, use of, and preferences for consumer health IT. This study took place between August and December 2013. The second recruitment strategy targeted individuals with type 2 diabetes and involved creating a study-related Facebook group and asking administrators of other groups and pages to publicize our group to their members. Group members were then directly invited to participate in an online pre-study survey. This portion of a larger study to understand existing health management practices as a foundation for consumer health IT design took place between May and June 2014. In executing both recruitment strategies, efforts were made to establish trust and transparency. Recruitment rate, cost, content of interaction, and characteristics of the sample obtained were used to assess the recruitment methods. The two recruitment methods yielded 87 and 79 complete responses, respectively. The first recruitment method yielded a rate of study completion proportionate to that of the rate of posts made, whereas recruitment successes of the second recruitment method seemed to follow directly from the actions of a subset of administrators. Excluding personnel time, the first recruitment method resulted in no direct costs, and the second recruitment method resulted in a total direct cost of US $118.17. Messages, posts, and comments received using both recruitment strategies reflected ten themes, including appreciation, assistance, clarification, concerns, encouragement, health information, interest, promotion, solicitations, and support. Both recruitment methods produced mixed results regarding sample representativeness with respect to characteristics such as gender, race, and ethnicity. The results of the study demonstrate that leveraging the social structures of Facebook for health-related research was feasible for obtaining small samples appropriate for qualitative research but not for obtaining large samples needed for quantitative research. The content of interactions with members of the target population prompted ethical deliberations concerning suitable target communities and appropriate boundaries between researchers and participants. Widespread replication of this method would benefit from a broad discussion among researchers, social media users, social media companies, and experts in research ethics to address appropriate protocols for such interactions.

Unsupervised daily routine and activity discovery in smart homes.

PubMed

Jie Yin; Qing Zhang; Karunanithi, Mohan

2015-08-01

The ability to accurately recognize daily activities of residents is a core premise of smart homes to assist with remote health monitoring. Most of the existing methods rely on a supervised model trained from a preselected and manually labeled set of activities, which are often time-consuming and costly to obtain in practice. In contrast, this paper presents an unsupervised method for discovering daily routines and activities for smart home residents. Our proposed method first uses a Markov chain to model a resident's locomotion patterns at different times of day and discover clusters of daily routines at the macro level. For each routine cluster, it then drills down to further discover room-level activities at the micro level. The automatic identification of daily routines and activities is useful for understanding indicators of functional decline of elderly people and suggesting timely interventions.

Qualitative Research and Consumer Policy: Focus Group Discussions as a Form of Consumer Participation

ERIC Educational Resources Information Center

Heiskanen, Eva; Jarvela, Katja; Pulliainen, Annukka; Saastamoinen, Mika; Timonen, Paivi

2008-01-01

This paper describes our ongoing attempts to involve consumers in innovation and technology policy by means of a national Consumer Panel, using focus group discussions as the primary method of consumer participation. We evaluate our experiences of the usefulness of focus group discussions in this context by considering two examples of studies…

Formulation of detailed consumables management models for the development (preoperational) period of advanced space transportation system. Volume 3: Study of constraints/limitations for STS consumables management

NASA Technical Reports Server (NTRS)

Newman, C. M.

1976-01-01

The constraints and limitations for STS Consumables Management are studied. Variables imposing constraints on the consumables related subsystems are identified, and a method determining constraint violations with the simplified consumables model in the Mission Planning Processor is presented.

The impact of services that offer individualised funds, shared management, person-centred relationships, and self-direction on the lived experiences of consumers with mental illness.

PubMed

Peterson, Sunila; Buchanan, Angus; Falkmer, Torbjorn

2014-01-01

Mental health service providers across Australia, including Western Australia (WA), have begun to offer individualised funds, shared management, person-centred and self-directed (SPS) services. No research exists on the impact of SPS services on the lived experiences of these particular consumers. This study explored the impact of a SPS service offered for the first time in WA to consumers with mental illness. Data on sixteen consumers' lived experiences were analysed using an abbreviated grounded theory approach. These data had been developed by the consumers, Guides (staff) and an independent evaluator, and most of it had been collected in the past prior to the commencement of the study. Three over-arching categories, and related subcategories, emerged indicating that 1) access to individualised funds enabled practical and psychological benefits to consumers; 2) consistent contact in shared management and person-centred relationships enhanced the provision of timely and meaningful staff support to consumers; and 3) high quality shared management and person-centred relationships with staff and the opportunity to self-direct enabled consumers' change and growth. SPS services enhanced consumers' lived experiences and enabled staff to provide and consumers to experience timely access to recovery resources, consistent contact, responsive and high quality support, and self-direction of services. In this, consumers changed, grew and achieved desired recovery experiences. The overall impact of the SPS service seemed to be founded on the goodness of fit between person characteristics of staff and consumers, which enabled rich support that provided for corrective emotional experiences. This enabled consumers to build meaningful and hopeful lives where they started to live with, and beyond, their mental illness.

Longitudinal comparative evaluation of the equivalence of an integrated peer-support and clinical staffing model for residential mental health rehabilitation: a mixed methods protocol incorporating multiple stakeholder perspectives.

PubMed

Parker, Stephen; Dark, Frances; Newman, Ellie; Korman, Nicole; Meurk, Carla; Siskind, Dan; Harris, Meredith

2016-06-02

A novel staffing model integrating peer support workers and clinical staff within a unified team is being trialled at community based residential rehabilitation units in Australia. A mixed-methods protocol for the longitudinal evaluation of the outcomes, expectations and experiences of care by consumers and staff under this staffing model in two units will be compared to one unit operating a traditional clinical staffing. The study is unique with regards to the context, the longitudinal approach and consideration of multiple stakeholder perspectives. The longitudinal mixed methods design integrates a quantitative evaluation of the outcomes of care for consumers at three residential rehabilitation units with an applied qualitative research methodology. The quantitative component utilizes a prospective cohort design to explore whether equivalent outcomes are achieved through engagement at residential rehabilitation units operating integrated and clinical staffing models. Comparative data will be available from the time of admission, discharge and 12-month period post-discharge from the units. Additionally, retrospective data for the 12-month period prior to admission will be utilized to consider changes in functioning pre and post engagement with residential rehabilitation care. The primary outcome will be change in psychosocial functioning, assessed using the total score on the Health of the Nation Outcome Scales (HoNOS). Planned secondary outcomes will include changes in symptomatology, disability, recovery orientation, carer quality of life, emergency department presentations, psychiatric inpatient bed days, and psychological distress and wellbeing. Planned analyses will include: cohort description; hierarchical linear regression modelling of the predictors of change in HoNOS following CCU care; and descriptive comparisons of the costs associated with the two staffing models. The qualitative component utilizes a pragmatic approach to grounded theory, with collection of data from consumers and staff at multiple time points exploring their expectations, experiences and reflections on the care provided by these services. It is expected that the new knowledge gained through this study will guide the adaptation of these and similar services. For example, if differential outcomes are achieved for consumers under the integrated and clinical staffing models this may inform staffing guidelines.

Context-Sensitive Spelling Correction of Consumer-Generated Content on Health Care

PubMed Central

Chen, Rudan; Zhao, Xianyang; Xu, Wei; Cheng, Wenqing; Lin, Simon

2015-01-01

Background Consumer-generated content, such as postings on social media websites, can serve as an ideal source of information for studying health care from a consumer’s perspective. However, consumer-generated content on health care topics often contains spelling errors, which, if not corrected, will be obstacles for downstream computer-based text analysis. Objective In this study, we proposed a framework with a spelling correction system designed for consumer-generated content and a novel ontology-based evaluation system which was used to efficiently assess the correction quality. Additionally, we emphasized the importance of context sensitivity in the correction process, and demonstrated why correction methods designed for electronic medical records (EMRs) failed to perform well with consumer-generated content. Methods First, we developed our spelling correction system based on Google Spell Checker. The system processed postings acquired from MedHelp, a biomedical bulletin board system (BBS), and saved misspelled words (eg, sertaline) and corresponding corrected words (eg, sertraline) into two separate sets. Second, to reduce the number of words needing manual examination in the evaluation process, we respectively matched the words in the two sets with terms in two biomedical ontologies: RxNorm and Systematized Nomenclature of Medicine -- Clinical Terms (SNOMED CT). The ratio of words which could be matched and appropriately corrected was used to evaluate the correction system’s overall performance. Third, we categorized the misspelled words according to the types of spelling errors. Finally, we calculated the ratio of abbreviations in the postings, which remarkably differed between EMRs and consumer-generated content and could largely influence the overall performance of spelling checkers. Results An uncorrected word and the corresponding corrected word was called a spelling pair, and the two words in the spelling pair were its members. In our study, there were 271 spelling pairs detected, among which 58 (21.4%) pairs had one or two members matched in the selected ontologies. The ratio of appropriate correction in the 271 overall spelling errors was 85.2% (231/271). The ratio of that in the 58 spelling pairs was 86% (50/58), close to the overall ratio. We also found that linguistic errors took up 31.4% (85/271) of all errors detected, and only 0.98% (210/21,358) of words in the postings were abbreviations, which was much lower than the ratio in the EMRs (33.6%). Conclusions We conclude that our system can accurately correct spelling errors in consumer-generated content. Context sensitivity is indispensable in the correction process. Additionally, it can be confirmed that consumer-generated content differs from EMRs in that consumers seldom use abbreviations. Also, the evaluation method, taking advantage of biomedical ontology, can effectively estimate the accuracy of the correction system and reduce manual examination time. PMID:26232246

Validation of a Three-Dimensional Method for Counting and Sizing Podocytes in Whole Glomeruli

PubMed Central

van der Wolde, James W.; Schulze, Keith E.; Short, Kieran M.; Wong, Milagros N.; Bensley, Jonathan G.; Cullen-McEwen, Luise A.; Caruana, Georgina; Hokke, Stacey N.; Li, Jinhua; Firth, Stephen D.; Harper, Ian S.; Nikolic-Paterson, David J.; Bertram, John F.

2016-01-01

Podocyte depletion is sufficient for the development of numerous glomerular diseases and can be absolute (loss of podocytes) or relative (reduced number of podocytes per volume of glomerulus). Commonly used methods to quantify podocyte depletion introduce bias, whereas gold standard stereologic methodologies are time consuming and impractical. We developed a novel approach for assessing podocyte depletion in whole glomeruli that combines immunofluorescence, optical clearing, confocal microscopy, and three-dimensional analysis. We validated this method in a transgenic mouse model of selective podocyte depletion, in which we determined dose-dependent alterations in several quantitative indices of podocyte depletion. This new approach provides a quantitative tool for the comprehensive and time-efficient analysis of podocyte depletion in whole glomeruli. PMID:26975438

Methods for culturing saltwater rotifers (Brachionus plicatilis) for rearing larval zebrafish.

PubMed

Lawrence, Christian; Sanders, Erik; Henry, Eric

2012-09-01

The saltwater rotifer, Brachionus plicatilis, is widely used in the aquaculture industry as a prey item for first-feeding fishes due to its ease of culture, small size, rapid reproductive rate, and amenability to enrichment with nutrients. Despite the distinct advantages of this approach, rotifers have only been sporadically utilized for rearing larval zebrafish, primarily because of the common misconception that maintaining cultures of rotifers is difficult and excessively time-consuming. Here we present simple methods for maintaining continuous cultures of rotifers capable of supporting even the very largest zebrafish aquaculture facility, with minimal investments in materials, time, labor, and space. Examples of the methods' application in one large, existing facility is provided, and troubleshooting of common problems is discussed.

Identification of Drivers of Liking for Bar-Type Snacks Based on Individual Consumer Preference.

PubMed

Kim, Mina K; Greve, Patrick; Lee, Youngseung

2016-01-01

Understanding consumer hedonic responses on food products are of greatest interests in global food industry. A global partial least square regression (GPLSR) had been well accepted method for understanding consumer preferences. Recently, individual partial least square regression (IPLSR) was accepted as an alternative method of predicting consumer preferences on given food product, because it utilizes the individual differences on product acceptability. To improve the understanding of what constitutes bar-type snack preference, the relationship between sensory attributes and consumer overall liking for 12 bar-type snacks was determined. Sensory attributes that drive consumer product likings were analyzed using averaged-consumer data by GPLSR. To facilitate the interpretation of individual consumer liking, a dummy matrix for the significant weighted regression coefficients of each consumer derived from IPLSR was created. From the application of GPLSR and IPLSR, current study revealed that chocolate and cereal-flavored bars were preferred over fruit-flavored bars. Attributes connected to chocolate flavor positively influenced consumer overall likings on the global and individual consumer levels. Textural attributes affected liking only on the individual level. To fully capture the importance of sensory attributes on consumer preference, the use of GPLSR in conjunction with IPLSR is recommended. © 2015 Institute of Food Technologists®

17 CFR 160.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Form of opt out notice to... COMMISSION PRIVACY OF CONSUMER FINANCIAL INFORMATION Privacy and Opt Out Notices § 160.7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are required to provide an...

Factors affecting dry-cured ham consumer acceptability.

PubMed

Morales, R; Guerrero, L; Aguiar, A P S; Guàrdia, M D; Gou, P

2013-11-01

The objectives of the present study were (1) to compare the relative importance of price, processing time, texture and intramuscular fat in purchase intention of dry-cured ham through conjoint analysis, (2) to evaluate the effect of dry-cured ham appearance on consumer expectations, and (3) to describe the consumer sensory preferences of dry-cured ham using external preference mapping. Texture and processing time influenced the consumer preferences in conjoint analysis. Red colour intensity, colour uniformity, external fat and white film presence/absence influenced consumer expectations. The consumer disliked hams with bitter and metallic flavour and with excessive saltiness and piquantness. Differences between expected and experienced acceptability were found, which indicates that the visual preference of consumers does not allow them to select a dry-cured ham that satisfies their sensory preferences of flavour and texture. Copyright © 2013 Elsevier Ltd. All rights reserved.

Passive auto-focus for digital still cameras and camera phones: Filter-switching and low-light techniques

NASA Astrophysics Data System (ADS)

Gamadia, Mark Noel

In order to gain valuable market share in the growing consumer digital still camera and camera phone market, camera manufacturers have to continually add and improve existing features to their latest product offerings. Auto-focus (AF) is one such feature, whose aim is to enable consumers to quickly take sharply focused pictures with little or no manual intervention in adjusting the camera's focus lens. While AF has been a standard feature in digital still and cell-phone cameras, consumers often complain about their cameras' slow AF performance, which may lead to missed photographic opportunities, rendering valuable moments and events with undesired out-of-focus pictures. This dissertation addresses this critical issue to advance the state-of-the-art in the digital band-pass filter, passive AF method. This method is widely used to realize AF in the camera industry, where a focus actuator is adjusted via a search algorithm to locate the in-focus position by maximizing a sharpness measure extracted from a particular frequency band of the incoming image of the scene. There are no known systematic methods for automatically deriving the parameters such as the digital pass-bands or the search step-size increments used in existing passive AF schemes. Conventional methods require time consuming experimentation and tuning in order to arrive at a set of parameters which balance AF performance in terms of speed and accuracy ultimately causing a delay in product time-to-market. This dissertation presents a new framework for determining an optimal set of passive AF parameters, named Filter- Switching AF, providing an automatic approach to achieve superior AF performance, both in good and low lighting conditions based on the following performance measures (metrics): speed (total number of iterations), accuracy (offset from truth), power consumption (total distance moved), and user experience (in-focus position overrun). Performance results using three different prototype cameras are presented to further illustrate the real-world AF performance gains achieved by the developed approach. The major contribution of this dissertation is that the developed auto focusing approach can be successfully used by camera manufacturers in the development of the AF feature in future generations of digital still cameras and camera phones.

The Effects of Consumer Education on Consumer Search.

ERIC Educational Resources Information Center

Fast, Janet; And Others

1989-01-01

A study investigated the relationship between selected consumer and marketplace characteristics and consumers' prepurchase allocation of search time among information sources (product test reports; dealer sales representatives; advertisements; family and friends). The household production model proved useful; written educational materials appeared…

Low-thrust orbit transfer optimization with refined Q-law and multi-objective genetic algorithm

NASA Technical Reports Server (NTRS)

Lee, Seungwon; Petropoulos, Anastassios E.; von Allmen, Paul

2005-01-01

An optimization method for low-thrust orbit transfers around a central body is developed using the Q-law and a multi-objective genetic algorithm. in the hybrid method, the Q-law generates candidate orbit transfers, and the multi-objective genetic algorithm optimizes the Q-law control parameters in order to simultaneously minimize both the consumed propellant mass and flight time of the orbit tranfer. This paper addresses the problem of finding optimal orbit transfers for low-thrust spacecraft.

Comparison between two methods of hydrostatic weighing without head submersion in morbidly obese females.

PubMed

Israel, R G; Evans, P; Pories, W J; O'Brien, K F; Donnelly, J E

1990-01-01

This study compared two methods of hydrostatic weighing without head submersion to conventional hydrostatic weighting in morbidly obese females. We concluded that hydrostatic weighing without head submersion is a valid alternative to conventional hydrostatic weighing especially when subjects are apprehensive in the water. The use of anthropometric head measures (HWNS-A) did not significantly improve the accuracy of the body composition assessment; therefore, elimination of these time consuming measurements in favor of the direct correction of head above Db is recommended.

The Coast Artillery Journal. Volume 65, Number 5, November 1926

DTIC Science & Technology

1926-11-01

frequently that "it is written" has come to mean "it is true." To plan a course by dividing the number of pages in a text by the number of lesson periods...questions; and it permits computations to be checked for method. Its disadvantages are that it is a time-consumer; it is exceedingly difficult to grade the...student are not shown; that computations are not shown and hence cannot be checked for method; and that the prepara- tion of examinations (requiring

Creating more effective health plan quality reports for consumers: lessons from a synthesis of qualitative testing.

PubMed Central

Harris-Kojetin, L D; McCormack, L A; Jaël, E F; Sangl, J A; Garfinkel, S A

2001-01-01

OBJECTIVE: Social marketing techniques such as consumer testing have only recently been applied to develop effective consumer health insurance information. This article discusses lessons learned from consumer testing to create consumer plan choice materials. DATA SOURCES/STUDY SETTING: Data were collected from 268 publicly and privately insured consumers in three studies between 1994 and 1999. STUDY DESIGN: Iterative testing and revisions were conducted to design seven booklets to help Medicaid, Medicare, and employed consumers choose a health plan. DATA COLLECTION METHODS: Standardized protocols were used in 11 focus groups and 182 interviews to examine the content, comprehension, navigation, and utility of the booklets. PRINCIPAL FINDINGS: A method is suggested to help consumers narrow their plan choices by breaking down the process into smaller decisions using a set of guided worksheets. CONCLUSION: Implementing these lessons is challenging and not often done well. This article gives examples of evidence-based approaches to address cognitive barriers that designers of consumer health insurance information can adapt to their needs. Images Figure. 3 PMID:11482584

Prevalence and energy intake from snacking in Brazil: analysis of the first nationwide individual survey

PubMed Central

Duffey, Kiyah J.; Pereira, Rosangela A.; Popkin, Barry M.

2013-01-01

Background/Objectives Snacking has increased globally. We examine snacking patterns and common snack foods in Brazil. Subjects/Methods Data from the first of two non-consecutive food diaries from 34,003 individuals (aged ≥10 years) in the first Brazillian nationally representative dietary survey (2008-2009) were used. Meals were defined as the largest (kcal) eating event reported during select times of the day (Breakfast, 6am-10am; Lunch, 12pm-3pm; Dinner, 6pm-9pm); all other eating occasions were considered snacks. We estimate daily energy intake, percent consuming, number of daily snacks, and per capita and per consumer energy from snacks (kcal/d, kcal/snack, and % of daily energy from snacks). Results 74% of Brazilians (≥10 years) snacked, reporting an average 1.6 snacks/d. 23% of the sample were heavy snackers (≥3 snacks/d). Snacking accounted for 21% of daily energy intake in the full sample, but 35.5% among heavy snackers. Compared to non-snackers (1548 kcal/d), light (1-2 snacks/d) and heavy snackers consumed more daily energy (1929 and 2334 kcal/d, respectively). By time of day, the largest percent of persons reported afternoon/early evening snacking (3:01-5:59 pm, 47.7%). Sweetened Coffee & Tea, Sweets & Desserts, Fruit, Sugar-Sweetened Beverages (SSB), and high-calorie Salgados (Fried/baked dough with Meat/Cheese/Vegetable) were the top 5 most commonly consumed snacks. Differences were observed by age groups. Trends in commercial sales were observed, especially for SSB’s. Conclusions Many commonly consumed snack foods in Brazil are classified, in the US, as being high in solid fats and added sugars (SoFAS). The public health impact of snacking in Brazil requires further exploration. PMID:23486510

Socio-economic differences in takeaway food consumption among adults.

PubMed

Miura, Kyoko; Giskes, Katrina; Turrell, Gavin

2012-02-01

To examine socio-economic differences in the frequency and types of takeaway foods consumed. A cross-sectional postal survey. Participants were asked about their usual consumption of overall takeaway food (<4 times/month or ≥4 times/month) and of twenty-two specific takeaway food items (<1 time/month or ≥1 time/month); these latter foods were grouped into 'healthy' and 'less healthy' choices. Socio-economic position was measured on the basis of educational level and equivalised household income, and differences in takeaway food consumption were assessed by calculating prevalence ratios using log binomial regression. Adults aged 25-64 years from Brisbane, Australia, were randomly selected from the electoral roll (n 903; 63·7 % response rate). Compared with their more educated counterparts, the least educated were more regular consumers of overall takeaway food and fruit or vegetable juice and less regular consumers of sushi. For the 'less healthy' items, the least educated more regularly consumed potato chips, savoury pies, fried chicken and non-diet soft drinks; however, the least educated were less likely to consume curry. Household income was not associated with overall takeaway consumption. The lowest-income group was a more regular consumer of fruit or vegetable juice compared with the highest-income group. Among the 'less healthy' items, the lowest-income group was a more regular consumer of fried fish, ice cream and milk shakes, whereas curry was consumed less regularly. The frequency and types of takeaway foods consumed by socio-economically disadvantaged groups may contribute to inequalities in overweight or obesity and to chronic disease.

Fully convolutional networks (FCNs)-based segmentation method for colorectal tumors on T2-weighted magnetic resonance images.

PubMed

Jian, Junming; Xiong, Fei; Xia, Wei; Zhang, Rui; Gu, Jinhui; Wu, Xiaodong; Meng, Xiaochun; Gao, Xin

2018-06-01

Segmentation of colorectal tumors is the basis of preoperative prediction, staging, and therapeutic response evaluation. Due to the blurred boundary between lesions and normal colorectal tissue, it is hard to realize accurate segmentation. Routinely manual or semi-manual segmentation methods are extremely tedious, time-consuming, and highly operator-dependent. In the framework of FCNs, a segmentation method for colorectal tumor was presented. Normalization was applied to reduce the differences among images. Borrowing from transfer learning, VGG-16 was employed to extract features from normalized images. We conducted five side-output blocks from the last convolutional layer of each block of VGG-16 along the network, these side-output blocks can deep dive multiscale features, and produced corresponding predictions. Finally, all of the predictions from side-output blocks were fused to determine the final boundaries of the tumors. A quantitative comparison of 2772 colorectal tumor manual segmentation results from T2-weighted magnetic resonance images shows that the average Dice similarity coefficient, positive predictive value, specificity, sensitivity, Hammoude distance, and Hausdorff distance were 83.56, 82.67, 96.75, 87.85%, 0.2694, and 8.20, respectively. The proposed method is superior to U-net in colorectal tumor segmentation (P < 0.05). There is no difference between cross-entropy loss and Dice-based loss in colorectal tumor segmentation (P > 0.05). The results indicate that the introduction of FCNs contributed to accurate segmentation of colorectal tumors. This method has the potential to replace the present time-consuming and nonreproducible manual segmentation method.

12 CFR 227.22 - Unfair acts or practices regarding time to make payment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... THE FEDERAL RESERVE SYSTEM UNFAIR OR DECEPTIVE ACTS OR PRACTICES (REGULATION AA) Consumer Credit Card.... Except as provided in paragraph (c) of this section, a bank must not treat a payment on a consumer credit card account as late for any purpose unless the consumer has been provided a reasonable amount of time...

75 FR 36639 - Change in Times for Meeting of Chronic Hazard Advisory Panel on Phthalates and Phthalate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... children's toys and child care articles, pursuant to section 108 of the Consumer Product Safety Improvement..., pursuant to section 108 of the Consumer Product Safety Improvement Act of 2008 (CPSIA) (Pub. L. 110-314... CONSUMER PRODUCT SAFETY COMMISSION Change in Times for Meeting of Chronic Hazard Advisory Panel on...

Improved patch-based learning for image deblurring

NASA Astrophysics Data System (ADS)

Dong, Bo; Jiang, Zhiguo; Zhang, Haopeng

2015-05-01

Most recent image deblurring methods only use valid information found in input image as the clue to fill the deblurring region. These methods usually have the defects of insufficient prior information and relatively poor adaptiveness. Patch-based method not only uses the valid information of the input image itself, but also utilizes the prior information of the sample images to improve the adaptiveness. However the cost function of this method is quite time-consuming and the method may also produce ringing artifacts. In this paper, we propose an improved non-blind deblurring algorithm based on learning patch likelihoods. On one hand, we consider the effect of the Gaussian mixture model with different weights and normalize the weight values, which can optimize the cost function and reduce running time. On the other hand, a post processing method is proposed to solve the ringing artifacts produced by traditional patch-based method. Extensive experiments are performed. Experimental results verify that our method can effectively reduce the execution time, suppress the ringing artifacts effectively, and keep the quality of deblurred image.

Development and validity of a 3-day smartphone assisted 24-hour recall to assess beverage consumption in a Chinese population: a randomized cross-over study.

PubMed

Smith, Lindsey P; Hua, Jenna; Seto, Edmund; Du, Shufa; Zang, Jiajie; Zou, Shurong; Popkin, Barry M; Mendez, Michelle A

2014-01-01

This paper addresses the need for diet assessment methods that capture the rapidly changing beverage consumption patterns in China. The objective of this study was to develop a 3-day smartphone-assisted 24-hour recall to improve the quantification of beverage intake amongst young Chinese adults (n=110) and validate, in a small subset (n=34), the extent to which the written record and smartphone-assisted recalls adequately estimated total fluid intake, using 24-hour urine samples. The smartphone-assisted method showed improved validity compared with the written record-assisted method, when comparing reported total fluid intake to total urine volume. However, participants reported consuming fewer beverages on the smartphone-assisted method compared with the written record-assisted method, primarily due to decreased consumption of traditional zero-energy beverages (i.e. water, tea) in the smartphone-assisted method. It is unclear why participants reported fewer beverages in the smartphone-assisted method than the written record -assisted method. One possibility is that participants found the smartphone method too cumbersome, and responded by decreasing beverage intake. These results suggest that smartphone-assisted 24-hour recalls perform comparably but do not appear to substantially improve beverage quantification compared with the current written record-based approach. In addition, we piloted a beverage screener to identify consumers of episodically consumed SSBs. As expected, a substantially higher proportion of consumers reported consuming SSBs on the beverage screener compared with either recall type, suggesting that a beverage screener may be useful in characterizing consumption of episodically consumed beverages in China's dynamic food and beverage landscape.

Development and validity of a 3-day smartphone-assisted 24-hour recall to assess beverage consumption in a Chinese population: a randomized cross-over study

PubMed Central

Smith, Lindsey P.; Hua, Jenna; Seto, Edmund; Du, Shufa; Zang, Jiajie; Zou, Shurong; Popkin, Barry M.; Mendez, Michelle A.

2014-01-01

This paper addresses the need for diet assessment methods that capture the rapidly changing beverage consumption patterns in China. The objective of this study was to develop a 3-day smartphone-assisted 24-hour recall to improve the quantification of beverage intake amongst young Chinese adults (n=110) and validate, in a small subset (n=34), the extent to which the written record and smartphone-assisted recalls adequately estimated total fluid intake, using 24-hour urine samples. The smartphone-assisted method showed improved validity compared to the written-assisted method, when comparing reported total fluid intake to total urine volume. However, participants reported consuming fewer beverages on the smartphone-assisted method compared to the written-assisted method, primarily due to decreased consumption of traditional zero-energy beverages (i.e. water, tea) in the smartphone-assisted method. It is unclear why participants reported fewer beverages in the smartphone-assisted method than the written-assisted method. One possibility is that participants found the smartphone method too cumbersome, and responded by decreasing beverage intake. These results suggest that smartphone-assisted 24-hour recalls perform comparably but do not appear to substantially improve beverage quantification compared to the current written record based approach. In addition, we piloted a beverage screener to identify consumers of episodically consumed SSBs. As expected, a substantially higher proportion of consumers reported consuming SSBs on the beverage screener compared to either recall type, suggesting that a beverage screener may be useful in characterizing consumption of episodically consumed beverages in China’s dynamic food and beverage landscape. PMID:25516327

Consumer Health Informatics: The Application of ICT in Improving Patient-Provider Partnership for a Better Health Care

PubMed Central

Larweh, Benjamin Teye

2014-01-01

Background There is a growing interest concerning the potential of ICT solutions that are customized to consumers. This emerging discipline referred to as consumer health informatics (CHI) plays a major role in providing information to patients and the public, and facilitates the promotion of self-management. The concept of CHI has emerged out of the desire of most patients to shoulder responsibilities regarding their health and a growing desire of health practitioners to fully appreciate the potential of the patient. Aim To describe the role of ICT in improving the patient-provider partnership in consumer health informatics. Methods Systematic reviewing of literature, identification of reference sources and formulation of search strategies and manual search regarding the significance of developed CHI applications in healthcare delivery. Results New consumer health IT applications have been developed to be used on a variety of different platforms, including the Web, messaging systems, PDAs, and cell phones. These applications assists patients with self-management through reminders and prompts, delivery of real-time data on a patient’s health condition to patients and providers, web-based communication and personal electronic health information. Conclusion New tools are being developed for the purposes of providing information to patients and the public which has enhanced decision making in health matters and an avenue for clinicians and consumers to exchange health information for personal and public use. This calls for corroboration among healthcare organizations, governments and the ICT industry to develop new research and IT innovations which are tailored to the health needs of the consumer. PMID:25422724

Utilization of community pharmacy space to enhance privacy: a qualitative study.

PubMed

Hattingh, H Laetitia; Emmerton, Lynne; Ng Cheong Tin, Pascale; Green, Catherine

2016-10-01

Community pharmacists require access to consumers' information about their medicines and health-related conditions to make informed decisions regarding treatment options. Open communication between consumers and pharmacists is ideal although consumers are only likely to disclose relevant information if they feel that their privacy requirements are being acknowledged and adhered to. This study sets out to explore community pharmacy privacy practices, experiences and expectations and the utilization of available space to achieve privacy. Qualitative methods were used, comprising a series of face-to-face interviews with 25 pharmacists and 55 pharmacy customers in Perth, Western Australia, between June and August 2013. The use of private consultation areas for certain services and sensitive discussions was supported by pharmacists and consumers although there was recognition that workflow processes in some pharmacies may need to change to maximize the use of private areas. Pharmacy staff adopted various strategies to overcome privacy obstacles such as taking consumers to a quieter part of the pharmacy, avoiding exposure of sensitive items through packaging, lowering of voices, interacting during pharmacy quiet times and telephoning consumers. Pharmacy staff and consumers regularly had to apply judgement to achieve the required level of privacy. Management of privacy can be challenging in the community pharmacy environment, and on-going work in this area is important. As community pharmacy practice is increasingly becoming more involved in advanced medication and disease state management services with unique privacy requirements, pharmacies' layouts and systems to address privacy challenges require a proactive approach. © 2015 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

Mass spectrometry in grape and wine chemistry. Part II: The consumer protection.

PubMed

Flamini, Riccardo; Panighel, Annarita

2006-01-01

Controls in food industry are fundamental to protect the consumer health. For products of high quality, warranty of origin and identity is required and analytical control is very important to prevent frauds. In this article, the "state of art" of mass spectrometry in enological chemistry as a consumer safety contribute is reported. Gas chromatography-mass spectrometry (GC/MS) and liquid-chromatography-mass spectrometry (LC/MS) methods have been developed to determine pesticides, ethyl carbamate, and compounds from the yeast and bacterial metabolism in wine. The presence of pesticides in wine is mainly linked to the use of dicarboxyimide fungicides on vineyard shortly before the harvest to prevent the Botrytis cinerea attack of grape. Pesticide residues are regulated at maximum residue limits in grape of low ppm levels, but significantly lower levels in wine have to be detected, and mass spectrometry offers effective and sensitive methods. Moreover, mass spectrometry represent an advantageous alternative to the radioactive-source-containing electron capture detector commonly used in GC analysis of pesticides. Analysis of ochratoxin A (OTA) in wine by LC/MS and multiple mass spectrometry (MS/MS) permits to confirm the toxin presence without the use of expensive immunoaffinity columns, or time and solvent consuming sample derivatization procedures. Inductively coupled plasma-mass spectrometry (ICP/MS) is used to control heavy metals contamination in wine, and to verify the wine origin and authenticity. Isotopic ratio-mass spectrometry (IRMS) is applied to reveal wine watering and sugar additions, and to determine the product origin and traceability.

Comparison of K-means and fuzzy c-means algorithm performance for automated determination of the arterial input function.

PubMed

Yin, Jiandong; Sun, Hongzan; Yang, Jiawen; Guo, Qiyong

2014-01-01

The arterial input function (AIF) plays a crucial role in the quantification of cerebral perfusion parameters. The traditional method for AIF detection is based on manual operation, which is time-consuming and subjective. Two automatic methods have been reported that are based on two frequently used clustering algorithms: fuzzy c-means (FCM) and K-means. However, it is still not clear which is better for AIF detection. Hence, we compared the performance of these two clustering methods using both simulated and clinical data. The results demonstrate that K-means analysis can yield more accurate and robust AIF results, although it takes longer to execute than the FCM method. We consider that this longer execution time is trivial relative to the total time required for image manipulation in a PACS setting, and is acceptable if an ideal AIF is obtained. Therefore, the K-means method is preferable to FCM in AIF detection.

Comparison of K-Means and Fuzzy c-Means Algorithm Performance for Automated Determination of the Arterial Input Function

PubMed Central

Yin, Jiandong; Sun, Hongzan; Yang, Jiawen; Guo, Qiyong

2014-01-01

The arterial input function (AIF) plays a crucial role in the quantification of cerebral perfusion parameters. The traditional method for AIF detection is based on manual operation, which is time-consuming and subjective. Two automatic methods have been reported that are based on two frequently used clustering algorithms: fuzzy c-means (FCM) and K-means. However, it is still not clear which is better for AIF detection. Hence, we compared the performance of these two clustering methods using both simulated and clinical data. The results demonstrate that K-means analysis can yield more accurate and robust AIF results, although it takes longer to execute than the FCM method. We consider that this longer execution time is trivial relative to the total time required for image manipulation in a PACS setting, and is acceptable if an ideal AIF is obtained. Therefore, the K-means method is preferable to FCM in AIF detection. PMID:24503700

Accelerating wave propagation modeling in the frequency domain using Python

NASA Astrophysics Data System (ADS)

Jo, Sang Hoon; Park, Min Jun; Ha, Wan Soo

2017-04-01

Python is a dynamic programming language adopted in many science and engineering areas. We used Python to simulate wave propagation in the frequency domain. We used the Pardiso matrix solver to solve the impedance matrix of the wave equation. Numerical examples shows that Python with numpy consumes longer time to construct the impedance matrix using the finite element method when compared with Fortran; however we could reduce the time significantly to be comparable to that of Fortran using a simple Numba decorator.

AC induction field heating of graphite foam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klett, James W.; Rios, Orlando; Kisner, Roger

A magneto-energy apparatus includes an electromagnetic field source for generating a time-varying electromagnetic field. A graphite foam conductor is disposed within the electromagnetic field. The graphite foam when exposed to the time-varying electromagnetic field conducts an induced electric current, the electric current heating the graphite foam. An energy conversion device utilizes heat energy from the heated graphite foam to perform a heat energy consuming function. A device for heating a fluid and a method of converting energy are also disclosed.

12 CFR 716.7 - Form of opt out notice to consumers and opt out methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

... your consumers that accurately explains the right to opt out under that section. The notice must state... consumer to a nonaffiliated third party; (ii) That the consumer has the right to opt out of that disclosure; and (iii) A reasonable means by which the consumer may exercise the opt out right. (2) Examples. (i...

The Field Artillery Battalion on the Nuclear Battlefield

DTIC Science & Technology

1975-06-06

flexibility of radio communications. The drawback to tactical wire communications is that the estao- lishment and maintenance of the system is time consuming ...Adjusted fires are a much simpler, though time consum - ing mission. Whatever the inaccuracies in target location, 16 . ■■■ ■’■"’ rgfimtm...SCP). The current practice of a separate SCP for the 8", SP battalion is both time consuming and illogical. Service support The application of the

Methods for calculating the vergence of an astigmatic ray bundle in an optical system that contains a freeform surface

NASA Astrophysics Data System (ADS)

Shirayanagi, Moriyasu

2016-10-01

A method using the generalized Coddington equations enables calculating the vergence of an astigmatic ray bundle in the vicinity of a skew ray in an optical system containing a freeform surface. Because this method requires time-consuming calculations, however, there is still room for increasing the calculation speed. In addition, this method cannot be applied to optical systems containing a medium with a gradient index. Therefore, we propose two new calculation methods in this paper. The first method, using differential ray tracing, enables us to shorten computation time by using simpler algorithms than those used by conventional methods. The second method, using proximate rays, employs only the ray data obtained from the rays exiting an optical system. Therefore, this method can be applied to an optical system that contains a medium with a gradient index. We show some sample applications of these methods in the field of ophthalmic optics.

[Analyzing consumer preference by using the latest semantic model for verbal protocol].

PubMed

Tamari, Yuki; Takemura, Kazuhisa

2012-02-01

This paper examines consumers' preferences for competing brands by using a preference model of verbal protocols. Participants were 150 university students, who reported their opinions and feelings about McDonalds and Mos Burger (competing hamburger restaurants in Japan). Their verbal protocols were analyzed by using the singular value decomposition method, and the latent decision frames were estimated. The verbal protocols having a large value in the decision frames could be interpreted as showing attributes that consumers emphasize. Based on the estimated decision frames, we predicted consumers' preferences using the logistic regression analysis method. The results indicate that the decision frames projected from the verbal protocol data explained consumers' preferences effectively.

Consumer satisfaction with telehealth advice-nursing.

PubMed

Chang, B L; Mayo, A; Omery, A

2001-01-01

An increase in interest in the establishment of telephone advice services has resulted in the proliferation of call centers. Despite their wide usage, research for the most part has not addressed the quality of care in relation to consumer satisfaction. This paper examines consumer outcomes of satisfaction, and follow-up with recommendations, within a framework of the nursing process and its associated components of assessment (including problem identification), care planning, intervention, and evaluation. The data for the study were obtained from seven after-hours call centers operating under the auspices of health maintenance organizations, preferred provider organizations, and private insurance companies. A sample of 157 non-redundant telephone calls from adults with medical-surgical problems were audiotaped with providers' and callers' consent. Sociodemographic information of the advice nurses, and chief complaints of the callers were obtained. The quality of nursing of the audiotaped calls was rated through an implicit review method by registered nurse raters using an advice nurse structured implicit review (AN-SIR) form developed for the study. Follow-up information was obtained through telephone calls to ascertain the consumers' perceptions of satisfaction, helpfulness, and follow-through with recommendations. Results indicated that consumers calling with a variety of general complaints contacted 32 nurses in advice nurse call centers. The quality of nursing process was found to be the best in the area of intervention. Evaluation was also well above the midpoint on a transformed scale of zero to 100. Assessment, although slightly above midpoint, was the lowest of the three components of the nursing process examined. Consumer satisfaction was high with 95.4 percent of the consumers rating the calls as completely or at least somewhat satisfied, and 93.2 percent, stating the advice was very or somewhat helpful. Exploratory regression analysis showed that the component of intervention was significantly related to consumer satisfaction. The present study pioneers the way to rate the quality of the advice nurses' interactions with consumers, and lays the groundwork for further investigations of health care provider behavior and consumer outcomes. Further studies are recommended to investigate predictors of consumer satisfaction, and cost-benefit in terms of consumer expenditures of time, funds, and energy.

Consumable core for manufacture of composite articles and related method

DOEpatents

Taxacher, Glenn Curtis; de Diego, Peter; Gray, Paul Edward; Monaghan, Philip Harold

2017-09-05

Systems, methods and devices adapted to ease manufacture of composite articles (e.g., ceramic composite articles), particularly composite articles which include a hollow feature are disclosed. In one embodiment, a system includes: a consumable core formed to be disposed within an inner portion of a composite precursor, the consumable core adapted to convert into an infiltrant during a manufacturing process and infiltrate the composite precursor.

12 CFR 216.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Form of opt out notice to consumers; opt out....7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are... on the relevant forms with the opt out notice; (B) Include a reply form together with the opt out...

12 CFR 332.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Form of opt out notice to consumers; opt out... Form of opt out notice to consumers; opt out methods. (a) (1) Form of opt out notice. If you are... on the relevant forms with the opt out notice; (B) Include a reply form together with the opt out...

12 CFR 216.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 2 2011-01-01 2011-01-01 false Form of opt out notice to consumers; opt out....7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are... on the relevant forms with the opt out notice; (B) Include a reply form together with the opt out...

12 CFR 332.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Form of opt out notice to consumers; opt out... Form of opt out notice to consumers; opt out methods. (a) (1) Form of opt out notice. If you are... on the relevant forms with the opt out notice; (B) Include a reply form together with the opt out...

12 CFR 216.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 2 2012-01-01 2012-01-01 false Form of opt out notice to consumers; opt out....7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are... on the relevant forms with the opt out notice; (B) Include a reply form together with the opt out...

12 CFR 332.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Form of opt out notice to consumers; opt out... Form of opt out notice to consumers; opt out methods. (a) (1) Form of opt out notice. If you are... on the relevant forms with the opt out notice; (B) Include a reply form together with the opt out...

12 CFR 332.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Form of opt out notice to consumers; opt out... Form of opt out notice to consumers; opt out methods. (a) (1) Form of opt out notice. If you are... on the relevant forms with the opt out notice; (B) Include a reply form together with the opt out...

12 CFR 216.7 - Form of opt out notice to consumers; opt out methods.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 2 2013-01-01 2013-01-01 false Form of opt out notice to consumers; opt out....7 Form of opt out notice to consumers; opt out methods. (a)(1) Form of opt out notice. If you are... on the relevant forms with the opt out notice; (B) Include a reply form together with the opt out...

National Economic Policies: The Impact on Consumer Welfare. Proceedings of the American Council on Consumer Interests Annual Conference (29th, Kansas City, Missouri, March 16-19, 1983).

ERIC Educational Resources Information Center

Goebel, Karen P., Ed.

These proceedings contain the texts of the papers presented at a conference on consumer interests. Addressed in the first series of concurrent sessions are the following topics: consumers' new economic positions, consumers' choices with respect to price and quality trade-offs, time value in consumption decisions, and consumer information issues.…

Multi-point estimation of total energy expenditure: a comparison between zinc-reduction and platinum-equilibration methodologies.

PubMed

Sonko, Bakary J; Miller, Leland V; Jones, Richard H; Donnelly, Joseph E; Jacobsen, Dennis J; Hill, James O; Fennessey, Paul V

2003-12-15

Reducing water to hydrogen gas by zinc or uranium metal for determining D/H ratio is both tedious and time consuming. This has forced most energy metabolism investigators to use the "two-point" technique instead of the "Multi-point" technique for estimating total energy expenditure (TEE). Recently, we purchased a new platinum (Pt)-equilibration system that significantly reduces both time and labor required for D/H ratio determination. In this study, we compared TEE obtained from nine overweight but healthy subjects, estimated using the traditional Zn-reduction method to that obtained from the new Pt-equilibration system. Rate constants, pool spaces, and CO2 production rates obtained from use of the two methodologies were not significantly different. Correlation analysis demonstrated that TEEs estimated using the two methods were significantly correlated (r=0.925, p=0.0001). Sample equilibration time was reduced by 66% compared to those of similar methods. The data demonstrated that the Zn-reduction method could be replaced by the Pt-equilibration method when TEE was estimated using the "Multi-Point" technique. Furthermore, D equilibration time was significantly reduced.

Automatic Testing and Assessment of Neuroanatomy Using a Digital Brain Atlas: Method and Development of Computer- and Mobile-Based Applications

ERIC Educational Resources Information Center

Nowinski, Wieslaw L.; Thirunavuukarasuu, Arumugam; Ananthasubramaniam, Anand; Chua, Beng Choon; Qian, Guoyu; Nowinska, Natalia G.; Marchenko, Yevgen; Volkau, Ihar

2009-01-01

Preparation of tests and student's assessment by the instructor are time consuming. We address these two tasks in neuroanatomy education by employing a digital media application with a three-dimensional (3D), interactive, fully segmented, and labeled brain atlas. The anatomical and vascular models in the atlas are linked to "Terminologia…

Atmospheric deposition of inorganic nitrogen in Spanish forests of Quercus ilex measured with ion-exchange resins and conventional collectors

Treesearch

Héctor García-Gomez; Sheila Izquieta-Rojano; Laura Aguillaume; Ignacio González-Fernández; Fernando Valiño; David Elustondo; Jesús M. Santamaría; Anna Àvila; Mark E. Fenn; Rocío Alonso

2016-01-01

Atmospheric nitrogen deposition is one of the main threats for biodiversity and ecosystem functioning. Measurement techniques like ion-exchange resin collectors (IECs), which are less expensive and time-consuming than conventional methods, are gaining relevance in the study of atmospheric deposition and are recommended to expand monitoring networks. In the present work...

Brief Report: Consistency of Search Engine Rankings for Autism Websites

ERIC Educational Resources Information Center

Reichow, Brian; Naples, Adam; Steinhoff, Timothy; Halpern, Jason; Volkmar, Fred R.

2012-01-01

The World Wide Web is one of the most common methods used by parents to find information on autism spectrum disorders and most consumers find information through search engines such as Google or Bing. However, little is known about how the search engines operate or the consistency of the results that are returned over time. This study presents the…

Low Frequency Vibration approach to asess the Performance of wood structural Systems

Treesearch

Xiping Wang; Robert J. Ross; Michael O. Hunt

2004-01-01

The primary means of inspecting buildings and other structures is to evaluate each structure member individually. This is a time consuming process that is expensive, particularly if sheathing or other covering materials must be removed to access the structural members. This paper presents an effort to use a low frequency vibration method for assessing the structural...

Classification of shiga toxin-producing escherichia coli (STEC) serotypes with hyperspectral microscope imagery

USDA-ARS?s Scientific Manuscript database

Non-O157:H7 Shiga toxin-producing Escherichia coli (STEC) strains such as O26, O45, O103, O111, O121 and O145 are recognized as serious outbreak to cause human illness due to their toxicity. Since a conventional microbiological method for cell counting is laborious and time-consuming process, optica...

Laboratory Assessment of Commercially Available Ultrasonic Rangefinders

DTIC Science & Technology

2015-11-01

how the room was designed to prevent sound reflections (a combination of the wedges absorbing the waveforms and not having a flat wall ). When testing... sound booth at 0.5 m. ...................................................................................... 5  iv This page is intentionally...environments for sound measurements using a tape measure. This mapping method can be time- consuming and unreliable as objects frequently move around in

A Novel Method for the In-Depth Multimodal Analysis of Student Learning Trajectories in Intelligent Tutoring Systems

ERIC Educational Resources Information Center

Liu, Ran; Stamper, John; Davenport, Jodi

2018-01-01

Temporal analyses are critical to understanding learning processes, yet understudied in education research. Data from different sources are often collected at different grain sizes, which are difficult to integrate. Making sense of data at many levels of analysis, including the most detailed levels, is highly time-consuming. In this paper, we…

Assessing Educational Outcomes in Middle Childhood: Validation of the Teacher Academic Attainment Scale

ERIC Educational Resources Information Center

Johnson, Samantha; Marlow, Neil; Wolke, Dieter

2012-01-01

Aim: Assessing educational outcomes in high-risk populations is crucial for defining long-term outcomes. As standardized tests are costly and time-consuming, we assessed the use of the Teacher Academic Attainment Scale (TAAS) as an outcome measure. Method: Three hundred and forty three children in mainstream schools aged 10 to 11 years (144 males,…

Comparison of an automated Most Probable Number (MPN) technique to traditional plating methods for estimating populations of total aerobes, coliforms and E. coli associated with freshly processed broiler chickens

USDA-ARS?s Scientific Manuscript database

Traditional microbiological techniques for estimating populations of viable bacteria can be laborious and time consuming. The Most Probable Number (MPN) technique is especially tedious as multiple series of tubes must be inoculated at several different dilutions. Recently, an instrument (TEMPOTM) ...

Low frequency vibration approach for assessing performance of wood floor systems

Treesearch

Xiping Wang; Robert J. Ross; Michael O. Hunt; John R. Erickson; John W. Forsman

2005-01-01

The primary means of inspecting buildings and other structures is to evaluate each structure member individually. This is a time-consuming and expensive process, particularly if sheathing or other covering materials must be removed to access the structural members. The objective of this study was to determine if a low frequency vibration method could be used to...

Automatic detection and identification of brown stink bug, Euschistus servus, and southern green stink bug, Nezara viridula, (Heteroptera: Pentatomidae) using intraspecific substrate-borne vibrational signals

USDA-ARS?s Scientific Manuscript database

Stink bugs cost the southeastern cotton industry millions of dollars each year in crop losses and control costs. These losses are reduced by strategic pesticide applications; however, current methods of monitoring these pests for making management decisions are time-consuming and costly. Therefore, ...

Fast generation of computer-generated holograms using wavelet shrinkage.

PubMed

Shimobaba, Tomoyoshi; Ito, Tomoyoshi

2017-01-09

Computer-generated holograms (CGHs) are generated by superimposing complex amplitudes emitted from a number of object points. However, this superposition process remains very time-consuming even when using the latest computers. We propose a fast calculation algorithm for CGHs that uses a wavelet shrinkage method, eliminating small wavelet coefficient values to express approximated complex amplitudes using only a few representative wavelet coefficients.

Fluorometry as a bacterial source tracking tool in coastal watersheds, Trinidad, CA

Treesearch

Trever Parker; Andrew Stubblefield

2012-01-01

Bacterial counts have long been used as indicators of water pollution that may affect public health. By themselves, bacteria are indicators only and can not be used to identify the source of the pollutant for remediation efforts. Methods of microbial source tracking are generally time consuming, labor intensive and expensive. As an alternative, a fluorometer can be...

The Use of Online Corrective Feedback in Academic Writing by L1 Malay Learners

ERIC Educational Resources Information Center

Yoke, Soo Kum; Rajendran, Cecilia Bai; Sain, Noridah; Kamaludin, Puteri Nur Hidayah; Nawi, Sofwah Md; Yusof, Suhaili

2013-01-01

Conventional corrective feedback has been widely practiced but has been said to be tedious, stressful and time consuming. As such, the focus of this study is to investigate the use of an alternative method to giving corrective feedback namely, an online corrective feedback through e-mail. In order to examine if this innovative form of corrective…

Earth Science Data Education through Cooking Up Recipes

NASA Astrophysics Data System (ADS)

Weigel, A. M.; Maskey, M.; Smith, T.; Conover, H.

2016-12-01

One of the major challenges in Earth science research and applications is understanding and applying the proper methods, tools, and software for using scientific data. These techniques are often difficult and time consuming to identify, requiring novel users to conduct extensive research, take classes, and reach out for assistance, thus hindering scientific discovery and real-world applications. To address these challenges, the Global Hydrology Resource Center (GHRC) DAAC has developed a series of data recipes that novel users such as students, decision makers, and general Earth scientists can leverage to learn how to use Earth science datasets. Once the data recipe content had been finalized, GHRC computer and Earth scientists collaborated with a web and graphic designer to ensure the content is both attractively presented to data users, and clearly communicated to promote the education and use of Earth science data. The completed data recipes include, but are not limited to, tutorials, iPython Notebooks, resources, and tools necessary for addressing key difficulties in data use across a broad user base. These recipes enable non-traditional users to learn how to use data, but also curates and communicates common methods and approaches that may be difficult and time consuming for these users to identify.

[Methamphetamine Use in Central Germany: A Qualitative Study on Consumer Groups and Motives from the Experts' Perspective].

PubMed

Hoffmann, Laura; Schumann, Nadine; Richter, Matthias

2017-09-11

Background Methamphetamine is one of the most consumed illegal drugs worldwide. In Germany, Methamphetamine shows the highest rates of growth in comparison to other illegal substances in recent years. Particularly Central Germany has been struck by a high rise in consumption. International studies indicate that there is no specific group of people that can be identified as Methamphetamine users. Different consumption patterns in terms of Methamphetamine use can be identified within various social groups. This qualitative study will explore different consumer groups among methamphetamine users, their motives, and how they differ by drug addiction type. Methods The empirical data collection was carried out in a consecutive 2-stage process. Initially, 39 semi-structured individual interviews with experts from different clinical areas were carried out about their experience and perspectives on Methamphetamine use. The results of the individual interviews were subsequently discussed and validated within 2 interdisciplinary focus groups. All interviews and focus groups were digitally recorded, transcribed and analyzed according to the method of Meuser & Nagel. Results Altogether, 3 consumer groups were identified: (1) Young parents, women and pregnant women, (2) young drug users and early adapters and (3) older drug users or late entrants. The guiding motive in terms of Methamphetamine use described by the experts was improved efficiency. Further motives are for instance overcoming stressful situations, enablement and improvement of sexual experiences, self-esteem enhancement, coping with crisis or trauma, curiosity and drug use as leisure time activity. Discussion/conclusion The results in terms of consumer groups and consumption motives are consistent with international findings and we were able to verify and expand them for Central Germany. The outcomes illustrated that there are different consumer groups among methamphetamine users that differ from consumer groups of other drug addiction types. Treatment and consultation have to anticipate these challenges and adapt their strategies to different needs. Finally, further improvement of accessibility for those affected persons is an imperative to the German healthcare system. © Georg Thieme Verlag KG Stuttgart · New York.

Moisture content measurement in paddy

NASA Astrophysics Data System (ADS)

Klomklao, P.; Kuntinugunetanon, S.; Wongkokua, W.

2017-09-01

Moisture content is an important quantity for agriculture product, especially in paddy. In principle, the moisture content can be measured by a gravimetric method which is a direct method. However, the gravimetric method is time-consuming. There are indirect methods such as resistance and capacitance methods. In this work, we developed an indirect method based on a 555 integrated circuit timer. The moisture content sensor was capacitive parallel plates using the dielectric constant property of the moisture. The instrument generated the output frequency that depended on the capacitance of the sensor. We fitted a linear relation between periods and moisture contents. The measurement results have a standard uncertainty of 1.23 % of the moisture content in the range of 14 % to 20 %.

Integrating asthma hazard characterization methods for consumer products.

PubMed

Maier, A; Vincent, M J; Gadagbui, B; Patterson, J; Beckett, W; Dalton, P; Kimber, I; Selgrade, M J K

2014-10-01

Despite extensive study, definitive conclusions regarding the relationship between asthma and consumer products remain elusive. Uncertainties reflect the multi-faceted nature of asthma (i.e., contributions of immunologic and non-immunologic mechanisms). Many substances used in consumer products are associated with occupational asthma or asthma-like syndromes. However, risk assessment methods do not adequately predict the potential for consumer product exposures to trigger asthma and related syndromes under lower-level end-user conditions. A decision tree system is required to characterize asthma and respiratory-related hazards associated with consumer products. A system can be built to incorporate the best features of existing guidance, frameworks, and models using a weight-of-evidence (WoE) approach. With this goal in mind, we have evaluated chemical hazard characterization methods for asthma and asthma-like responses. Despite the wealth of information available, current hazard characterization methods do not definitively identify whether a particular ingredient will cause or exacerbate asthma, asthma-like responses, or sensitization of the respiratory tract at lower levels associated with consumer product use. Effective use of hierarchical lines of evidence relies on consideration of the relevance and potency of assays, organization of assays by mode of action, and better assay validation. It is anticipated that the analysis of existing methods will support the development of a refined WoE approach. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Multi-topic assignment for exploratory navigation of consumer health information in NetWellness using formal concept analysis

PubMed Central

2014-01-01

Background Finding quality consumer health information online can effectively bring important public health benefits to the general population. It can empower people with timely and current knowledge for managing their health and promoting wellbeing. Despite a popular belief that search engines such as Google can solve all information access problems, recent studies show that using search engines and simple search terms is not sufficient. Our objective is to provide an approach to organizing consumer health information for navigational exploration, complementing keyword-based direct search. Multi-topic assignment to health information, such as online questions, is a fundamental step for navigational exploration. Methods We introduce a new multi-topic assignment method combining semantic annotation using UMLS concepts (CUIs) and Formal Concept Analysis (FCA). Each question was tagged with CUIs identified by MetaMap. The CUIs were filtered with term-frequency and a new term-strength index to construct a CUI-question context. The CUI-question context and a topic-subject context were used for multi-topic assignment, resulting in a topic-question context. The topic-question context was then directly used for constructing a prototype navigational exploration interface. Results Experimental evaluation was performed on the task of automatic multi-topic assignment of 99 predefined topics for about 60,000 consumer health questions from NetWellness. Using example-based metrics, suitable for multi-topic assignment problems, our method achieved a precision of 0.849, recall of 0.774, and F1 measure of 0.782, using a reference standard of 278 questions with manually assigned topics. Compared to NetWellness’ original topic assignment, a 36.5% increase in recall is achieved with virtually no sacrifice in precision. Conclusion Enhancing the recall of multi-topic assignment without sacrificing precision is a prerequisite for achieving the benefits of navigational exploration. Our new multi-topic assignment method, combining term-strength, FCA, and information retrieval techniques, significantly improved recall and performed well according to example-based metrics. PMID:25086916

Getting by, getting back, and getting on: Matching mental health services to consumers' recovery goals.

PubMed

Yarborough, Bobbi Jo H; Yarborough, Micah T; Janoff, Shannon L; Green, Carla A

2016-06-01

The goal of this study was to better understand mental health recovery from the point of view of mental health consumers to identify opportunities for practice improvements that closely align services with consumer goals and consumer-preferred outcomes. As part of an exploratory study of recovery, semistructured interviews were conducted with 177 integrated health plan members diagnosed with schizophrenia, schizoaffective disorder, bipolar disorder, or affective psychosis. Transcripts of in-depth interviews were coded using Atlas.ti, and definitions of recovery were further subcoded. A qualitative analysis using a modified grounded theory approach and constant comparative method identified common themes and less common but potentially important recovery-related experiences and perspectives. Three primary and 2 cross-cutting themes emerged. "Getting by" meant coping and meeting basic needs. "Getting back" meant learning to live with mental illness. "Getting on" meant living a life where mental illness was no longer prominent. Regaining control and recouping losses were cross-cutting themes. Mental health recovery is complex and dynamic; individuals' recovery goals can be expected to change over time. Person-centered care must accommodate changing consumer priorities, services must be flexible and responsive, and outcomes need to match consumers' objectives. Clinicians can assist in (a) identifying recovery goals, (b) monitoring progress toward and recognizing movement away from goals, (c) tailoring support to different phases/stages, and (d) supporting transitions between phases/stages. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Citizen journalism in a time of crisis: lessons from a large-scale California wildfire

Treesearch

S. Gillette; J. Taylor; D.J. Chavez; R. Hodgson; J. Downing

2007-01-01

The accessibility of news production tools through consumer communication technology has made it possible for media consumers to become media producers. The evolution of media consumer to media producer has important implications for the shape of public discourse during a time of crisis. Citizen journalists cover crisis events using camera cell phones and digital...

Alcohol Consumption during Pregnancy and Postpartum Period and its Predictors in Sindhupalchowk District, Nepal.

PubMed

Aryal, K K; Thapa, N; Mehata, S; Thapa, P; Alvik, A; Stray-Pedersen, B

2016-09-01

A substantial proportion of women in Nepal consume alcohol and homebrewed alcoholic beverages are the most common type of alcohol. Alcohol being a part of tradition and culture in Nepal and evidences suggesting even low to moderate dose of alcohol having impacts on the birth outcomes, we aimed at exploring the alcohol consumption pattern during pregnancy and postpartum period along with its predictors. We studied all pregnant and recently delivered women using quantitative methods in selected wards within selected Village Development Committees of Sindhupalchowk district in Nepal after purposively choosing the district. We present the findings on pregnancy and postpartum period drinking and its predictors as proportion and adjusted odds ratio along with 95% CI. One-third of women drank alcohol during pregnancy and 43% during postpartum period. Nearly all drinking women mostly consumed homebrewed alcoholic beverages such as jaad/chhyang/localraksi. One-third consumed it daily during pregnancy, while three-quarters consumed daily during postpartum. One-fifth of currently drinking women drank ≥5 standard drinks on average per day in the last 30 days. Illiterate or women with low level of education were three times more likely to consume alcohol during pregnancy than women with secondary level education or higher. Similarly, women who didn't know that alcohol during pregnancy affects mother and child were four and half times more likely to consume alcohol during pregnancy than those who knew about it. Also, being dalits, disadvantaged and janajatis, husband's drinking and home brewing of alcohol were strongly associated with women's drinking during pregnancy and postpartum period. A substantial proportion of women consumed alcohol during pregnancy and postpartum period with high consumption frequency. Findings suggested, increasing awareness about consequences of drinking during pregnancy and postpartum period would be helpful probably as one of the components of routine antenatal care with a special focus to ethnic groups such as dalits, disadvantaged janajatis including relatively advantaged janajatis as well as the women with lower levels of education. Culture sensitive behavior change communication interventions aimed at reducing home brewing and husband's drinking would also be important Keywords: Alcohol consumption; home brewed; Nepal; postpartum period; pregnancy; predictor.

New numerical method for radiation heat transfer in nonhomogeneous participating media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Howell, J.R.; Tan, Zhiqiang

A new numerical method, which solves the exact integral equations of distance-angular integration form for radiation transfer, is introduced in this paper. By constructing and prestoring the numerical integral formulas for the distance integral for appropriate kernel functions, this method eliminates the time consuming evaluations of the kernels of the space integrals in the formal computations. In addition, when the number of elements in the system is large, the resulting coefficient matrix is quite sparse. Thus, either considerable time or much storage can be saved. A weakness of the method is discussed, and some remedies are suggested. As illustrations, somemore » one-dimensional and two-dimensional problems in both homogeneous and inhomogeneous emitting, absorbing, and linear anisotropic scattering media are studied. Some results are compared with available data. 13 refs.« less

Automated seed localization from CT datasets of the prostate.

PubMed

Brinkmann, D H; Kline, R W

1998-09-01

With the increasing utilization of permanent brachytherapy implants for treating carcinoma of the prostate, the importance of accurate post-treatment dose calculation also increases for assessing patient outcome and planning future treatments. An automatic method for seed localization of permanent brachytherapy implants, using CT datasets of the prostate, has been developed and tested on a phantom using an actual patient planned seed distribution. This method was also compared to results with the three-film technique for three patient datasets. The automatic method is as accurate or more accurate than the three film technique for 1 mm, 3 mm, and 5 mm contiguous CT slices, and eliminates the inter- and intra-observer variability of the manual methods. The automated method improves the localization of brachytherapy seeds while reducing the time required for the user to input information, and is demonstrated to be less operator dependent, less time consuming, and potentially more accurate than the three-film technique.

Tag SNP selection via a genetic algorithm.

PubMed

Mahdevar, Ghasem; Zahiri, Javad; Sadeghi, Mehdi; Nowzari-Dalini, Abbas; Ahrabian, Hayedeh

2010-10-01

Single Nucleotide Polymorphisms (SNPs) provide valuable information on human evolutionary history and may lead us to identify genetic variants responsible for human complex diseases. Unfortunately, molecular haplotyping methods are costly, laborious, and time consuming; therefore, algorithms for constructing full haplotype patterns from small available data through computational methods, Tag SNP selection problem, are convenient and attractive. This problem is proved to be an NP-hard problem, so heuristic methods may be useful. In this paper we present a heuristic method based on genetic algorithm to find reasonable solution within acceptable time. The algorithm was tested on a variety of simulated and experimental data. In comparison with the exact algorithm, based on brute force approach, results show that our method can obtain optimal solutions in almost all cases and runs much faster than exact algorithm when the number of SNP sites is large. Our software is available upon request to the corresponding author.

About one counterexample of applying method of splitting in modeling of plating processes

NASA Astrophysics Data System (ADS)

Solovjev, D. S.; Solovjeva, I. A.; Litovka, Yu V.; Korobova, I. L.

2018-05-01

The paper presents the main factors that affect the uniformity of the thickness distribution of plating on the surface of the product. The experimental search for the optimal values of these factors is expensive and time-consuming. The problem of adequate simulation of coating processes is very relevant. The finite-difference approximation using seven-point and five-point templates in combination with the splitting method is considered as solution methods for the equations of the model. To study the correctness of the solution of equations of the mathematical model by these methods, the experiments were conducted on plating with a flat anode and cathode, which relative position was not changed in the bath. The studies have shown that the solution using the splitting method was up to 1.5 times faster, but it did not give adequate results due to the geometric features of the task under the given boundary conditions.

16 CFR 1115.14 - Time computations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL... spend a reasonable time for investigation and evaluation. (See § 1115.14(d).) (d) Time for investigation and evaluation. A subject firm may conduct a reasonably expeditious investigation in order to evaluate...

Validated flow-injection method for rapid aluminium determination in anti-perspirants.

PubMed

López-Gonzálvez, A; Ruiz, M A; Barbas, C

2008-09-29

A flow-injection (FI) method for the rapid determination of aluminium in anti-perspirants has been developed. The method is based on the spectrophotometric detection at 535nm of the complex formed between Al ions and the chromogenic reagent eriochrome cyanine R. Both the batch and FI methods were validated by checking the parameters included in the ISO-3543-1 regulation. Variables involved in the FI method were optimized by using appropriate statistical tools. The method does not exhibit interference from other substances present in anti-perspirants and it shows a high precision with a R.S.D. value (n=6) of 0.9%. Moreover, the accuracy of the method was evaluated by comparison with a back complexometric titration method, which is currently used for routine analysis in pharmaceutical laboratories. The Student's t-test showed that the results obtained by both methods were not significantly different for a significance level of 95%. A response time of 12s and a sample analysis time, by performing triplicate injections, of 60s were achieved. The analytical figures of merit make the method highly appropriate to substitute the time-consuming complexometric method for this kind of analysis.

Applying high resolution remote sensing image and DEM to falling boulder hazard assessment

NASA Astrophysics Data System (ADS)

Huang, Changqing; Shi, Wenzhong; Ng, K. C.

2005-10-01

Boulder fall hazard assessing generally requires gaining the boulder information. The extensive mapping and surveying fieldwork is a time-consuming, laborious and dangerous conventional method. So this paper proposes an applying image processing technology to extract boulder and assess boulder fall hazard from high resolution remote sensing image. The method can replace the conventional method and extract the boulder information in high accuracy, include boulder size, shape, height and the slope and aspect of its position. With above boulder information, it can be satisfied for assessing, prevention and cure boulder fall hazard.

An Algebraic Approach to Guarantee Harmonic Balance Method Using Gröbner Base

NASA Astrophysics Data System (ADS)

Yagi, Masakazu; Hisakado, Takashi; Okumura, Kohshi

Harmonic balance (HB) method is well known principle for analyzing periodic oscillations on nonlinear networks and systems. Because the HB method has a truncation error, approximated solutions have been guaranteed by error bounds. However, its numerical computation is very time-consuming compared with solving the HB equation. This paper proposes an algebraic representation of the error bound using Gröbner base. The algebraic representation enables to decrease the computational cost of the error bound considerably. Moreover, using singular points of the algebraic representation, we can obtain accurate break points of the error bound by collisions.

Neural network based chemical structure indexing.

PubMed

Rughooputh, S D; Rughooputh, H C

2001-01-01

Searches on chemical databases are presently dominated by the text-based content of a paper which can be indexed into a keyword searchable form. Such traditional searches can prove to be very time-consuming and discouraging to the less frequent scientist. We report a simple chemical indexing based on the molecular structure alone. The method used is based on a one-to-one correspondence between the chemical structure presented as an image to a neural network and the corresponding binary output. The method is direct and less cumbersome (compared with traditional methods) and proves to be robust, elegant, and very versatile.

Optimized Laplacian image sharpening algorithm based on graphic processing unit

NASA Astrophysics Data System (ADS)

Ma, Tinghuai; Li, Lu; Ji, Sai; Wang, Xin; Tian, Yuan; Al-Dhelaan, Abdullah; Al-Rodhaan, Mznah

2014-12-01

In classical Laplacian image sharpening, all pixels are processed one by one, which leads to large amount of computation. Traditional Laplacian sharpening processed on CPU is considerably time-consuming especially for those large pictures. In this paper, we propose a parallel implementation of Laplacian sharpening based on Compute Unified Device Architecture (CUDA), which is a computing platform of Graphic Processing Units (GPU), and analyze the impact of picture size on performance and the relationship between the processing time of between data transfer time and parallel computing time. Further, according to different features of different memory, an improved scheme of our method is developed, which exploits shared memory in GPU instead of global memory and further increases the efficiency. Experimental results prove that two novel algorithms outperform traditional consequentially method based on OpenCV in the aspect of computing speed.

Compressive Video Recovery Using Block Match Multi-Frame Motion Estimation Based on Single Pixel Cameras

PubMed Central

Bi, Sheng; Zeng, Xiao; Tang, Xin; Qin, Shujia; Lai, King Wai Chiu

2016-01-01

Compressive sensing (CS) theory has opened up new paths for the development of signal processing applications. Based on this theory, a novel single pixel camera architecture has been introduced to overcome the current limitations and challenges of traditional focal plane arrays. However, video quality based on this method is limited by existing acquisition and recovery methods, and the method also suffers from being time-consuming. In this paper, a multi-frame motion estimation algorithm is proposed in CS video to enhance the video quality. The proposed algorithm uses multiple frames to implement motion estimation. Experimental results show that using multi-frame motion estimation can improve the quality of recovered videos. To further reduce the motion estimation time, a block match algorithm is used to process motion estimation. Experiments demonstrate that using the block match algorithm can reduce motion estimation time by 30%. PMID:26950127

16 CFR 1213.4 - Test methods.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Test methods. 1213.4 Section 1213.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR ENTRAPMENT HAZARDS IN BUNK BEDS § 1213.4 Test methods. (a) Guardrails (see § 1213.3(a)(6...

16 CFR 1213.4 - Test methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Test methods. 1213.4 Section 1213.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR ENTRAPMENT HAZARDS IN BUNK BEDS § 1213.4 Test methods. (a) Guardrails (see § 1213.3(a)(6...

16 CFR 1213.4 - Test methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Test methods. 1213.4 Section 1213.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR ENTRAPMENT HAZARDS IN BUNK BEDS § 1213.4 Test methods. (a) Guardrails (see § 1213.3(a)(6...

16 CFR 1213.4 - Test methods.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Test methods. 1213.4 Section 1213.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR ENTRAPMENT HAZARDS IN BUNK BEDS § 1213.4 Test methods. (a) Guardrails (see § 1213.3(a)(6...

Beef customer satisfaction: cooking method and degree of doneness effects on the top loin steak.

PubMed

Lorenzen, C L; Neely, T R; Miller, R K; Tatum, J D; Wise, J W; Taylor, J F; Buyck, M J; Reagan, J O; Savell, J W

1999-03-01

The objective of this research was to evaluate the consumer-controlled factors of cooking method and degree of doneness on Top Choice, Low Choice, High Select, and Low Select top loin steaks. The in-home product test was conducted in Chicago, Houston, Philadelphia, and San Francisco. Consumers (n = 2,212) evaluated each top loin steak for overall like (OLIKE), tenderness (TEND), juiciness (JUIC), flavor desirability (DFLAV), and flavor intensity (IFLAV) using 23-point hedonic scales. Respondents in San Francisco and Philadelphia cooked their top loin steaks to lower degrees of doneness than those in Chicago and Houston. Outdoor grilling was the most common method of cookery for top loin steaks in all cities. Consumers had the highest preference for Top Choice steaks (P < .05) and the lowest preference for Low Select steaks (P < .05). Consumer OLIKE scores were the highest (P < .05) for steaks cooked to a medium rare or lesser degree of doneness. Consumers preferred (P < .05) medium and well done or more degrees of doneness over medium well. The interaction of city x cooking method was significant for all steak palatability attributes. The differences in consumer preparation techniques among cities present challenges for the beef industry to develop market-specific promotional campaigns.

Beyond Traditional Advertisements: Leveraging Facebook’s Social Structures for Research Recruitment

PubMed Central

Guterbock, Thomas M; Thompson, Morgan J; Reilly, Jeremiah D; Menefee, Hannah K; Bennici, Maria S; Williams, Ishan C; Rexrode, Deborah L

2014-01-01

Background Obtaining access to a demographically and geographically diverse sample for health-related research can be costly and time consuming. Previous studies have reported mixed results regarding the potential of using social media-based advertisements to overcome these challenges. Objective Our aim was to develop and assess the feasibility, benefits, and challenges of recruiting for research studies related to consumer health information technology (IT) by leveraging the social structures embedded in the social networking platform, Facebook. Methods Two recruitment strategies that involved direct communication with existing Facebook groups and pages were developed and implemented in two distinct populations. The first recruitment strategy involved posting a survey link directly to consenting groups and pages and was used to recruit Filipino-Americans to a study assessing the perceptions, use of, and preferences for consumer health IT. This study took place between August and December 2013. The second recruitment strategy targeted individuals with type 2 diabetes and involved creating a study-related Facebook group and asking administrators of other groups and pages to publicize our group to their members. Group members were then directly invited to participate in an online pre-study survey. This portion of a larger study to understand existing health management practices as a foundation for consumer health IT design took place between May and June 2014. In executing both recruitment strategies, efforts were made to establish trust and transparency. Recruitment rate, cost, content of interaction, and characteristics of the sample obtained were used to assess the recruitment methods. Results The two recruitment methods yielded 87 and 79 complete responses, respectively. The first recruitment method yielded a rate of study completion proportionate to that of the rate of posts made, whereas recruitment successes of the second recruitment method seemed to follow directly from the actions of a subset of administrators. Excluding personnel time, the first recruitment method resulted in no direct costs, and the second recruitment method resulted in a total direct cost of US $118.17. Messages, posts, and comments received using both recruitment strategies reflected ten themes, including appreciation, assistance, clarification, concerns, encouragement, health information, interest, promotion, solicitations, and support. Both recruitment methods produced mixed results regarding sample representativeness with respect to characteristics such as gender, race, and ethnicity. Conclusions The results of the study demonstrate that leveraging the social structures of Facebook for health-related research was feasible for obtaining small samples appropriate for qualitative research but not for obtaining large samples needed for quantitative research. The content of interactions with members of the target population prompted ethical deliberations concerning suitable target communities and appropriate boundaries between researchers and participants. Widespread replication of this method would benefit from a broad discussion among researchers, social media users, social media companies, and experts in research ethics to address appropriate protocols for such interactions. PMID:25348050

Estimation of adsorption isotherm and mass transfer parameters in protein chromatography using artificial neural networks.

PubMed

Wang, Gang; Briskot, Till; Hahn, Tobias; Baumann, Pascal; Hubbuch, Jürgen

2017-03-03

Mechanistic modeling has been repeatedly successfully applied in process development and control of protein chromatography. For each combination of adsorbate and adsorbent, the mechanistic models have to be calibrated. Some of the model parameters, such as system characteristics, can be determined reliably by applying well-established experimental methods, whereas others cannot be measured directly. In common practice of protein chromatography modeling, these parameters are identified by applying time-consuming methods such as frontal analysis combined with gradient experiments, curve-fitting, or combined Yamamoto approach. For new components in the chromatographic system, these traditional calibration approaches require to be conducted repeatedly. In the presented work, a novel method for the calibration of mechanistic models based on artificial neural network (ANN) modeling was applied. An in silico screening of possible model parameter combinations was performed to generate learning material for the ANN model. Once the ANN model was trained to recognize chromatograms and to respond with the corresponding model parameter set, it was used to calibrate the mechanistic model from measured chromatograms. The ANN model's capability of parameter estimation was tested by predicting gradient elution chromatograms. The time-consuming model parameter estimation process itself could be reduced down to milliseconds. The functionality of the method was successfully demonstrated in a study with the calibration of the transport-dispersive model (TDM) and the stoichiometric displacement model (SDM) for a protein mixture. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Suspect Screening Analysis of Chemicals in Consumer Products.

PubMed

Phillips, Katherine A; Yau, Alice; Favela, Kristin A; Isaacs, Kristin K; McEachran, Andrew; Grulke, Christopher; Richard, Ann M; Williams, Antony J; Sobus, Jon R; Thomas, Russell S; Wambaugh, John F

2018-03-06

A two-dimensional gas chromatography-time-of-flight/mass spectrometry (GC×GC-TOF/MS) suspect screening analysis method was used to rapidly characterize chemicals in 100 consumer products-which included formulations (e.g., shampoos, paints), articles (e.g., upholsteries, shower curtains), and foods (cereals)-and therefore supports broader efforts to prioritize chemicals based on potential human health risks. Analyses yielded 4270 unique chemical signatures across the products, with 1602 signatures tentatively identified using the National Institute of Standards and Technology 2008 spectral database. Chemical standards confirmed the presence of 119 compounds. Of the 1602 tentatively identified chemicals, 1404 were not present in a public database of known consumer product chemicals. Reported data and model predictions of chemical functional use were applied to evaluate the tentative chemical identifications. Estimated chemical concentrations were compared to manufacturer-reported values and other measured data. Chemical presence and concentration data can now be used to improve estimates of chemical exposure, and refine estimates of risk posed to human health and the environment.

Evaluation of different cooking conditions on broccoli (Brassica oleracea var. italica) to improve the nutritional value and consumer acceptance.

PubMed

Bongoni, Radhika; Verkerk, Ruud; Steenbekkers, Bea; Dekker, Matthijs; Stieger, Markus

2014-09-01

The objective of this study was to gain insights into the effect of the cooking method on the liking as well as the retention of glucosinolates in broccoli. With this knowledge it can be concluded whether the health aspects of broccoli be improved by the cooking method without deteriorating sensory perception. For this, broccoli was cooked by methods commonly applied by consumers: boiling with a cold (water) start; boiling with a hot (water) start; and steaming. Firmness, greenness and amount of total glucosinolates in cooked broccoli were instrumentally determined. Sensory evaluation by untrained consumers (n = 99) for liking and sensory attributes intensity rating were performed on broccoli cooked by steaming and boiling-cold start at three time points, which resulted in 'high', 'medium', 'low' firm broccoli samples. At the end of cooking, steaming showed an increase in the amount of total glucosinolates (+17%). Boiling-hot start (-41%) and boiling-cold start (-50%) showed a decrease in amount of total glucosinolates. Sensory evaluation did not show statistically significant differences between steaming and boiling-cold start in liking at 'high' and 'medium' firmness; and in the attribute intensity ratings (except for juiciness at 'medium' firmness, and flavour at 'medium' and 'low' firmness). This study demonstrates that medium firm broccoli showed optimum liking and that steaming compared to boiled-cold start showed higher amount of glucosinolates. It is concluded that the health aspects of broccoli can be improved without reducing the sensory aspects by optimising the cooking method.

75 FR 72773 - Empowering Consumers to Avoid Bill Shock; Consumer Information and Disclosure

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

... require mobile service providers to provide usage alerts and information that will assist consumers in... proposes rules that would require mobile service providers to provide usage alerts, such as voice or text... consumers, including methods such as providing voice or text alerts. In addition, the Commission seeks...

Predictors of Competitive Employment among Consumers with Co-Occurring Mental and Substance Use Disorders

ERIC Educational Resources Information Center

Biegel, David E.; Stevenson, Lauren D.; Beimers, David; Ronis, Robert J.; Boyle, Patrick

2010-01-01

Objectives: This study examines consumer and agency level predictors of competitive employment for consumers with co-occurring disorders. Methods: The study sample included 191 consumers from mental health agencies receiving Integrated Dual Diagnosis Treatment services, including a subgroup which was referred for Supported Employment Services.…

Using contingent choice methods to assess consumer preferences about health plan design.

PubMed

Marquis, M Susan; Buntin, Melinda Beeuwkes; Kapur, Kanika; Yegian, Jill M

2005-01-01

American insurers are designing products to contain health care costs by making consumers financially responsible for their choices. Little is known about how consumers will view these new designs. Our objective is to examine consumer preferences for selected benefit designs. We used the contingent choice method to assess willingness to pay for six health plan attributes. Our sample included subscribers to individual health insurance products in California, US. We used fitted logistic regression models to explore how preferences for the more generous attributes varied with the additional premium and with the characteristics of the subscriber. High quality was the most highly valued attribute based on the amounts consumers report they are willing to pay. They were also willing to pay substantial monthly premiums to reduce their overall financial risk. Individuals in lower health were willing to pay more to reduce their financial risk than individuals in better health. Consumers may prefer tiered-benefit designs to those that involve overall increases in cost sharing. More consumer information is needed to help consumers better evaluate the costs and benefits of their insurance choices.

Rapid, cost-effective and accurate quantification of Yucca schidigera Roezl. steroidal saponins using HPLC-ELSD method.

PubMed

Tenon, Mathieu; Feuillère, Nicolas; Roller, Marc; Birtić, Simona

2017-04-15

Yucca GRAS-labelled saponins have been and are increasingly used in food/feed, pharmaceutical or cosmetic industries. Existing techniques presently used for Yucca steroidal saponin quantification remain either inaccurate and misleading or accurate but time consuming and cost prohibitive. The method reported here addresses all of the above challenges. HPLC/ELSD technique is an accurate and reliable method that yields results of appropriate repeatability and reproducibility. This method does not over- or under-estimate levels of steroidal saponins. HPLC/ELSD method does not require each and every pure standard of saponins, to quantify the group of steroidal saponins. The method is a time- and cost-effective technique that is suitable for routine industrial analyses. HPLC/ELSD methods yield a saponin fingerprints specific to the plant species. As the method is capable of distinguishing saponin profiles from taxonomically distant species, it can unravel plant adulteration issues. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

The perceived healthiness of functional foods. A conjoint study of Danish, Finnish and American consumers' perception of functional foods.

PubMed

Bech-Larsen, Tino; Grunert, Klaus G

2003-02-01

Functional foods presumably enable the consumer to lead a healthier life without changing eating habits. Whether consumers accept this proposition or not is potentially influenced by their perceptions of the healthiness of the processing methods, enrichment components, food-types, and health claims used in the production and marketing of functional foods. Because consumers may perceive functional enrichment as interfering with nature, cultural values pertaining to man's manipulation of nature may also influence consumer acceptance of functional foods. The purpose of the study described here is to clarify to which extent Danish, Finnish and American consumers' perceptions of the healthiness of functional foods are explained by the factors mentioned above. The general results indicate that values pertaining to man's manipulation of nature is only modestly related to the acceptance of functional foods, whereas the use of different health claims, processing methods, enrichments, product types, and especially the interactions between the two latter, are important determinants of consumers' perceptions of the healthiness of functional foods.

Conceptual Design Oriented Wing Structural Analysis and Optimization

NASA Technical Reports Server (NTRS)

Lau, May Yuen

1996-01-01

Airplane optimization has always been the goal of airplane designers. In the conceptual design phase, a designer's goal could be tradeoffs between maximum structural integrity, minimum aerodynamic drag, or maximum stability and control, many times achieved separately. Bringing all of these factors into an iterative preliminary design procedure was time consuming, tedious, and not always accurate. For example, the final weight estimate would often be based upon statistical data from past airplanes. The new design would be classified based on gross characteristics, such as number of engines, wingspan, etc., to see which airplanes of the past most closely resembled the new design. This procedure works well for conventional airplane designs, but not very well for new innovative designs. With the computing power of today, new methods are emerging for the conceptual design phase of airplanes. Using finite element methods, computational fluid dynamics, and other computer techniques, designers can make very accurate disciplinary-analyses of an airplane design. These tools are computationally intensive, and when used repeatedly, they consume a great deal of computing time. In order to reduce the time required to analyze a design and still bring together all of the disciplines (such as structures, aerodynamics, and controls) into the analysis, simplified design computer analyses are linked together into one computer program. These design codes are very efficient for conceptual design. The work in this thesis is focused on a finite element based conceptual design oriented structural synthesis capability (CDOSS) tailored to be linked into ACSYNT.

The effects of consuming a high protein diet (4.4 g/kg/d) on body composition in resistance-trained individuals

PubMed Central

2014-01-01

Background The consumption of dietary protein is important for resistance-trained individuals. It has been posited that intakes of 1.4 to 2.0 g/kg/day are needed for physically active individuals. Thus, the purpose of this investigation was to determine the effects of a very high protein diet (4.4 g/kg/d) on body composition in resistance-trained men and women. Methods Thirty healthy resistance-trained individuals participated in this study (mean ± SD; age: 24.1 ± 5.6 yr; height: 171.4 ± 8.8 cm; weight: 73.3 ± 11.5 kg). Subjects were randomly assigned to one of the following groups: Control (CON) or high protein (HP). The CON group was instructed to maintain the same training and dietary habits over the course of the 8 week study. The HP group was instructed to consume 4.4 grams of protein per kg body weight daily. They were also instructed to maintain the same training and dietary habits (e.g. maintain the same fat and carbohydrate intake). Body composition (Bod Pod®), training volume (i.e. volume load), and food intake were determined at baseline and over the 8 week treatment period. Results The HP group consumed significantly more protein and calories pre vs post (p < 0.05). Furthermore, the HP group consumed significantly more protein and calories than the CON (p < 0.05). The HP group consumed on average 307 ± 69 grams of protein compared to 138 ± 42 in the CON. When expressed per unit body weight, the HP group consumed 4.4 ± 0.8 g/kg/d of protein versus 1.8 ± 0.4 g/kg/d in the CON. There were no changes in training volume for either group. Moreover, there were no significant changes over time or between groups for body weight, fat mass, fat free mass, or percent body fat. Conclusions Consuming 5.5 times the recommended daily allowance of protein has no effect on body composition in resistance-trained individuals who otherwise maintain the same training regimen. This is the first interventional study to demonstrate that consuming a hypercaloric high protein diet does not result in an increase in body fat. PMID:24834017

Making Space for Consuming Practices

ERIC Educational Resources Information Center

Rooney, Donna; Manidis, Marie; Scheeres, Hermine

2016-01-01

This empirically driven paper is about workplace learning with specific focus on the "work" of "consuming practices." By "consuming" we refer to the eating, and the drinking, and (at times) to the smoking that workers, in most organisations, do on a daily basis. Indeed, it is the quotidian nature of consuming, coupled…

Strategies to Increase Behavior-Specific Teacher Praise in an Inclusive Environment

ERIC Educational Resources Information Center

Musti-Rao, Shobana; Haydon, Todd

2011-01-01

Managing students' disruptive behavior in the classroom can be a time-consuming task and greatly reduces the amount of time teachers spend on instruction. Although there are several research-validated classroom management strategies, teachers are more likely to adopt strategies that are less time-consuming than strategies that take more time or…

[Study on the optimal extraction process of chaihushugan powder].

PubMed

Wang, Chun-yan; Zhang, Wan-ming; Zhang, Dan-shen; An, Fang; Tian, Jia-ming

2009-11-01

To study the optimal extraction process of chaihushugan powder by orthogonal design. RP-HPLC method was developed for the determination of saikosaponin a, ferulic acid, hesperidin and paeoniflorin in chaihushugan powder. The contents of the components and the extraction yield were selected as assessment indices. Four factors were study by L9 (3(4)), including the alcohol concentration, amount of alcohol, duration of extraction and times of extraction. The optimal extracting condition was 80% alcohol consumed as 10 times of crude herb amount, and extracting two times for 90 min each time. This study supplies theoretical base for the development of chaihushugan powder formulation.

An eco-friendly, quick and cost-effective method for the quantification of acrylamide in cereal-based baby foods.

PubMed

Cengiz, Mehmet Fatih; Gündüz, Cennet Pelin Boyacı

2014-09-01

The presence of acrylamide in cereal-based baby foods is a matter of great concern owing to its possible health effects. Derivatization followed by gas chromatography/mass spectrometry (GC/MS) is one of the most common methods to quantify acrylamide. However, it requires the use of toxic chemicals and is time-consuming. The aim of this study was to develop an eco-friendly, rapid and inexpensive method for the determination of acrylamide in cereal-based baby foods. The method involves defatting with n-hexane, extraction into water, precipitation of proteins, bromination, extraction into ethyl acetate and injection into a GC/MS system. The effects of defatting, precipitation, treatment with triethylamine, addition of internal standard and column selection were reviewed. A flow chart for acrylamide analysis was prepared. To evaluate the applicability of the method, 62 different cereal-based baby foods were analyzed. The levels of acrylamide ranged from not detected (below the limit of detection) to 660 µg kg(-1). The method is more eco-friendly and less expensive because it consumes very little solvent relative to other methods using bromine solutions and ethyl acetate. In addition, sample pre-treatment requires no solid phase extraction or concentration steps. The method is recommended for the determination of trace acrylamide in complex cereal-based baby food products. © 2014 Society of Chemical Industry.

Mid-infrared spectroscopy and chemometrics in corn starch classification

NASA Astrophysics Data System (ADS)

Dupuy, N.; Wojciechowski, C.; Ta, C. D.; Huvenne, J. P.; Legrand, P.

1997-06-01

The authentication of food is a very important issue for both the consumer and the food industry at all levels of the food chain from raw materials to finished products. Corn starch can be used in a wide variety of food preparations such as bakery cream fillings, sauces, salad dressings, frozen foods etc. Many modifications are made to corn starch in connection with its use in agrofood. The value of the product increases with the degree of modification. Some chemical and physical tests have been devised to solve the problem of identifying these modifications but all the methods are time consuming and require skilled operators. We separate corn starches into groups related to their modification on the basis of the infrared spectra.

Biomagnetic separation of Salmonella Typhimurium with high affine and specific ligand peptides isolated by phage display technique

NASA Astrophysics Data System (ADS)

Steingroewer, Juliane; Bley, Thomas; Bergemann, Christian; Boschke, Elke

2007-04-01

Analyses of food-borne pathogens are of great importance in order to minimize the health risk for customers. Thus, very sensitive and rapid detection methods are required. Current conventional culture techniques are very time consuming. Modern immunoassays and biochemical analysis also require pre-enrichment steps resulting in a turnaround time of at least 24 h. Biomagnetic separation (BMS) is a promising more rapid method. In this study we describe the isolation of high affine and specific peptides from a phage-peptide library, which combined with BMS allows the detection of Salmonella spp. with a similar sensitivity as that of immunomagnetic separation using antibodies.

Highly parallel demagnetization field calculation using the fast multipole method on tetrahedral meshes with continuous sources

NASA Astrophysics Data System (ADS)

Palmesi, P.; Exl, L.; Bruckner, F.; Abert, C.; Suess, D.

2017-11-01

The long-range magnetic field is the most time-consuming part in micromagnetic simulations. Computational improvements can relieve problems related to this bottleneck. This work presents an efficient implementation of the Fast Multipole Method [FMM] for the magnetic scalar potential as used in micromagnetics. The novelty lies in extending FMM to linearly magnetized tetrahedral sources making it interesting also for other areas of computational physics. We treat the near field directly and in use (exact) numerical integration on the multipole expansion in the far field. This approach tackles important issues like the vectorial and continuous nature of the magnetic field. By using FMM the calculations scale linearly in time and memory.

GC/MS screening method for phthalate esters in children's toys.

PubMed

Ting, Keh-Chuh; Gill, Modan; Garbin, Orlando

2009-01-01

Phthalate esters are commonly added into polyvinyl chloride (PVC) as softeners to make the plastic material flexible. Phthalates are suspected cancer-causing agents and possible teratogens; they have been linked to liver and kidney damage, as well as the underdevelopment of reproductive organs in humans and animals. Public safety concerns about human exposure to phthalates are on the rise because they do not chemically bond to PVC and leach from the material over time. Following the lead of the European Union and Japan in restricting the use of certain phthalates, a legal limit of 0.1% in children's toys was established by the California State Legislature (AB-1108). In addition to its mission to protect public health and the environment from toxic harm, the California Department of Toxic Substances Control (DTSC) has been delegated the role of lead agency for consumer product safety. To support DTSC's Green Chemistry activities, the Environmental Chemistry Laboratory Mobile Laboratory Team has developed an on-site screening method to monitor phthalates in children's toys. This method is simple, fast, and effective, with ample sensitivity to quantify the 6 restricted phthalates in children's toys at 100 ppm (limit of quantitation = 100 microg/g) which is 10 times lower than the legal allowable level of 0.1%. Additionally, the method has a high throughput capability and enables testing of approximately 6-10 samples per day, depending on the complexity of the sample matrix and concentration. This method is designed to survey the 6 phthalates in children's toys and other consumer products for compliance with the threshold of 0.1% (1000 ppm).

Data Characterization Using Artificial-Star Tests: Performance Evaluation

NASA Astrophysics Data System (ADS)

Hu, Yi; Deng, Licai; de Grijs, Richard; Liu, Qiang

2011-01-01

Traditional artificial-star tests are widely applied to photometry in crowded stellar fields. However, to obtain reliable binary fractions (and their uncertainties) of remote, dense, and rich star clusters, one needs to recover huge numbers of artificial stars. Hence, this will consume much computation time for data reduction of the images to which the artificial stars must be added. In this article, we present a new method applicable to data sets characterized by stable, well-defined, point-spread functions, in which we add artificial stars to the retrieved-data catalog instead of to the raw images. Taking the young Large Magellanic Cloud cluster NGC 1818 as an example, we compare results from both methods and show that they are equivalent, while our new method saves significant computational time.

Feedback-Based Projected-Gradient Method for Real-Time Optimization of Aggregations of Energy Resources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dall-Anese, Emiliano; Bernstein, Andrey; Simonetto, Andrea

This paper develops an online optimization method to maximize operational objectives of distribution-level distributed energy resources (DERs), while adjusting the aggregate power generated (or consumed) in response to services requested by grid operators. The design of the online algorithm is based on a projected-gradient method, suitably modified to accommodate appropriate measurements from the distribution network and the DERs. By virtue of this approach, the resultant algorithm can cope with inaccuracies in the representation of the AC power flows, it avoids pervasive metering to gather the state of noncontrollable resources, and it naturally lends itself to a distributed implementation. Optimality claimsmore » are established in terms of tracking of the solution of a well-posed time-varying convex optimization problem.« less

Feedback-Based Projected-Gradient Method For Real-Time Optimization of Aggregations of Energy Resources: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dall-Anese, Emiliano; Bernstein, Andrey; Simonetto, Andrea

This paper develops an online optimization method to maximize the operational objectives of distribution-level distributed energy resources (DERs) while adjusting the aggregate power generated (or consumed) in response to services requested by grid operators. The design of the online algorithm is based on a projected-gradient method, suitably modified to accommodate appropriate measurements from the distribution network and the DERs. By virtue of this approach, the resultant algorithm can cope with inaccuracies in the representation of the AC power, it avoids pervasive metering to gather the state of noncontrollable resources, and it naturally lends itself to a distributed implementation. Optimality claimsmore » are established in terms of tracking of the solution of a well-posed time-varying optimization problem.« less

Use of naturally occurring mercury to determine the importance of cutthroat trout to Yellowstone grizzly bears

USGS Publications Warehouse

Felicetti, L.A.; Schwartz, C.C.; Rye, R.O.; Gunther, K.A.; Crock, J.G.; Haroldson, M.A.; Waits, L.; Robbins, C.T.

2004-01-01

Spawning cutthroat trout (Oncorhynchus clarki (Richardson, 1836)) are a potentially important food resource for grizzly bears (Ursus arctos horribilis Ord, 1815) in the Greater Yellowstone Ecosystem. We developed a method to estimate the amount of cutthroat trout ingested by grizzly bears living in the Yellowstone Lake area. The method utilized (i) the relatively high, naturally occurring concentration of mercury in Yellowstone Lake cutthroat trout (508 ± 93 ppb) and its virtual absence in all other bear foods (6 ppb), (ii) hair snares to remotely collect hair from bears visiting spawning cutthroat trout streams between 1997 and 2000, (iii) DNA analyses to identify the individual and sex of grizzly bears leaving a hair sample, (iv) feeding trials with captive bears to develop relationships between fish and mercury intake and hair mercury concentrations, and (v) mercury analyses of hair collected from wild bears to estimate the amount of trout consumed by each bear. Male grizzly bears consumed an average of 5 times more trout/kg bear than did female grizzly bears. Estimated cutthroat trout intake per year by the grizzly bear population was only a small fraction of that estimated by previous investigators, and males consumed 92% of all trout ingested by grizzly bears.

High-throughput genotyping assay for the large-scale genetic characterization of Cryptosporidium parasites from human and bovine samples.

PubMed

Abal-Fabeiro, J L; Maside, X; Llovo, J; Bello, X; Torres, M; Treviño, M; Moldes, L; Muñoz, A; Carracedo, A; Bartolomé, C

2014-04-01

The epidemiological study of human cryptosporidiosis requires the characterization of species and subtypes involved in human disease in large sample collections. Molecular genotyping is costly and time-consuming, making the implementation of low-cost, highly efficient technologies increasingly necessary. Here, we designed a protocol based on MALDI-TOF mass spectrometry for the high-throughput genotyping of a panel of 55 single nucleotide variants (SNVs) selected as markers for the identification of common gp60 subtypes of four Cryptosporidium species that infect humans. The method was applied to a panel of 608 human and 63 bovine isolates and the results were compared with control samples typed by Sanger sequencing. The method allowed the identification of species in 610 specimens (90·9%) and gp60 subtype in 605 (90·2%). It displayed excellent performance, with sensitivity and specificity values of 87·3 and 98·0%, respectively. Up to nine genotypes from four different Cryptosporidium species (C. hominis, C. parvum, C. meleagridis and C. felis) were detected in humans; the most common ones were C. hominis subtype Ib, and C. parvum IIa (61·3 and 28·3%, respectively). 96·5% of the bovine samples were typed as IIa. The method performs as well as the widely used Sanger sequencing and is more cost-effective and less time consuming.

Quantitative determination of wool in textile by near-infrared spectroscopy and multivariate models.

PubMed

Chen, Hui; Tan, Chao; Lin, Zan

2018-08-05

The wool content in textiles is a key quality index and the corresponding quantitative analysis takes an important position due to common adulterations in both raw and finished textiles. Conventional methods are maybe complicated, destructive, time-consuming, environment-unfriendly. Developing a quick, easy-to-use and green alternative method is interesting. The work focuses on exploring the feasibility of combining near-infrared (NIR) spectroscopy and several partial least squares (PLS)-based algorithms and elastic component regression (ECR) algorithms for measuring wool content in textile. A total of 108 cloth samples with wool content ranging from 0% to 100% (w/w) were collected and all the compositions are really existent in the market. The dataset was divided equally into the training and test sets for developing and validating calibration models. When using local PLS, the original spectrum axis was split into 20 sub-intervals. No obvious difference of performance can be seen for the local PLS models. The ECR model is comparable or superior to the other models due its flexibility, i.e., being transition state from PCR to PLS. It seems that ECR combined with NIR technique may be a potential method for determining wool content in textile products. In addition, it might have regulatory advantages to avoid time-consuming and environmental-unfriendly chemical analysis. Copyright © 2018 Elsevier B.V. All rights reserved.

Beef customer satisfaction: cooking method and degree of doneness effects on the top sirloin steak.

PubMed

Savell, J W; Lorenzen, C L; Neely, T R; Miller, R K; Tatum, J D; Wise, J W; Taylor, J F; Buyck, M J; Reagan, J O

1999-03-01

The objective of this research was to evaluate the consumer-controlled factors of cooking method and degree of doneness on Top Choice, Low Choice, High Select, and Low Select top sirloin steaks. The in-home product test was conducted in Chicago, Houston, Philadelphia, and San Francisco. Consumers (n = 2,212) evaluated each top sirloin steak for overall like (OLIKE), tenderness (TEND), juiciness (JUIC), flavor desirability (DFLAV), and flavor intensity (IFLAV) using 23-point hedonic scales. Top sirloin steaks, regardless of city, were consistently cooked to well done or higher degrees of doneness. Dry-heat methods such as outdoor grilling, broiling, and indoor grilling were the most frequent cooking methods used. Four significant interactions existed for OLIKE: USDA quality grade x cooking method (P = .02), city x cooking method (P = .0001), city x degree of doneness (P = .01), and cooking method x degree of doneness (P = .009). Greater differences were found between cooking methods within USDA quality grade than between USDA quality grades within cooking method. Consumers in Houston rated steaks cooked by outdoor grilling higher than those from the other cities, and steaks cooked by indoor grilling were rated the highest among all cooking methods by consumers in Chicago. In Chicago, steaks cooked to more advanced degrees of doneness tended to receive higher ratings, but few differences between degrees of doneness in the other three cities were detected. For outdoor grilling, broiling, and pan-frying, the trend was for OLIKE ratings to decline as degree of doneness increased. The lowest customer satisfaction ratings tended to be given to top sirloin steaks cooked to more advanced degrees of doneness, and consumers most frequently cooked steaks to at least the well done stage. Consumer information programs or the development of postmortem techniques that would ensure acceptable palatability of top sirloin steaks may need to be developed.

Swedish Consumers' Perception of Food Quality and Sustainability in Relation to Organic Food Production.

PubMed

Bosona, Techane; Gebresenbet, Girma

2018-04-01

Consumers' demand for locally produced and organic foods has increased in Sweden. This paper presents the results obtained from the analysis of data acquired from 100 consumers in Sweden who participated in an online survey during March to June 2016. The objective was to identify consumers' demand in relation to organic food and sustainable food production, and to understand how the consumers evaluate food quality and make buying decisions. Qualitative descriptions, descriptive statistics and Pearson's Chi-square test (with alpha value of p < 0.05 as level of significance), and Pearson's correlation coefficient were used for analysis. About 72% of participants have the perception that organic food production method is more sustainable than conventional methods. Female consumers have more positive attitudes than men towards organic food. However, age difference, household size and income level do not significantly influence the consumers' perception of sustainable food production concepts. Regionality, sustainable methods of production and organic production are the most important parameters to characterize the food as high quality and make buying decisions. On the other hand, product uniformity, appearance, and price were found to be relatively less important parameters. Food buying decisions and food quality were found to be highly related with Pearson's correlation coefficient of r = 0.99.

A comparison of the effects of caffeine following abstinence and normal caffeine use

PubMed Central

Addicott, Merideth A.

2010-01-01

Rationale Caffeine typically produces positive effects on mood and performance. However, tolerance may develop following habitual use, and abrupt cessation can result in withdrawal symptoms, such as fatigue. This study investigated whether caffeine has a greater stimulant effect in a withdrawn state compared to a normal caffeinated state, among moderate daily caffeine consumers. Materials and methods Using a within-subjects design, 17 caffeine consumers (mean±sd=375±101 mg/day) ingested placebo or caffeine (250 mg) following 30-h of caffeine abstention or normal dietary caffeine use on four separate days. Self-reported mood and performance on choice reaction time, selective attention, and memory tasks were measured. Results Caffeine had a greater effect on mood and choice reaction time in the abstained state than in the normal caffeinated state, but caffeine improved selective attention and memory in both states. Conclusions Although improvements in mood and reaction time may best explained as relief from withdrawal symptoms, other performance measures showed no evidence of withdrawal and were equally sensitive to an acute dose of caffeine in the normal caffeinated state. PMID:19777214

Application of lean six sigma to waste minimization in cigarette paper industry

NASA Astrophysics Data System (ADS)

Syahputri, K.; Sari, R. M.; Anizar; Tarigan, I. R.; Siregar, I.

2018-02-01

The cigarette paper industry is one of the industry that is always experiencing increasing demand from consumers. Consumer expectations for the products produced also increased both in terms of quality and quantity. The company continuously improves the quality of its products by trying to minimize nonconformity, waste and improve the efficiency of the whole production process of the company. In this cigarette industry, there is a disability whose value is above the company’s defect tolerance that is 10% of the production amount per month. Another problem also occurs in the production time is too long due to the many activities that are not value added (non value added activities) on the production floor. To overcome this problem, it is necessary to improve the production process of cigarette paper and minimize production time by reducing non value added activities. Repairs done with Lean Six Sigma. Lean Six Sigma is a combination of Lean and Six Sigma concept with DMAIC method (Define, Measure, Analyze, Improve, Control). With this Lean approach, obtained total production time of 1479.13 minutes proposal with cycle efficiency process increased by 12.64%.

Fibre Optic Sensors for Selected Wastewater Characteristics

PubMed Central

Chong, Su Sin; Abdul Aziz, A. R.; Harun, Sulaiman W.

2013-01-01

Demand for online and real-time measurements techniques to meet environmental regulation and treatment compliance are increasing. However the conventional techniques, which involve scheduled sampling and chemical analysis can be expensive and time consuming. Therefore cheaper and faster alternatives to monitor wastewater characteristics are required as alternatives to conventional methods. This paper reviews existing conventional techniques and optical and fibre optic sensors to determine selected wastewater characteristics which are colour, Chemical Oxygen Demand (COD) and Biological Oxygen Demand (BOD). The review confirms that with appropriate configuration, calibration and fibre features the parameters can be determined with accuracy comparable to conventional method. With more research in this area, the potential for using FOS for online and real-time measurement of more wastewater parameters for various types of industrial effluent are promising. PMID:23881131

Rent-to-Own: A Consumer Purchasing Alternative.

ERIC Educational Resources Information Center

Stein, Pat; Brown, Judy

1988-01-01

Examines rent-to-own, an alternative purchasing method that allows the consumer to rent an item and gain ownership after a specified number of payments. Addresses industry trends, the rent-to-own consumer, pricing structure, and legalities. (JOW)